948 files changed, 63166 insertions, 12042 deletions

diff --git a/.gitignore b/.gitignore
index 51bd99d6a26..caa8395f635 100644
--- a/.gitignore
+++ b/.gitignore
@@ -3,7 +3,7 @@
 # subdirectories here. Add them in the ".gitignore" file
 # in that subdirectory instead.
 #
-# NOTE! Please use 'git-ls-files -i --exclude-standard'
+# NOTE! Please use 'git ls-files -i --exclude-standard'
 # command after changing this file, to see if there are
 # any tracked files which get ignored after the change.
 #
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 72968cd5eaf..8bb37237ebd 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -698,8 +698,8 @@ very often is not. Abundant use of the inline keyword leads to a much bigger
 kernel, which in turn slows the system as a whole down, due to a bigger
 icache footprint for the CPU and simply because there is less memory
 available for the pagecache. Just think about it; a pagecache miss causes a
-disk seek, which easily takes 5 miliseconds. There are a LOT of cpu cycles
-that can go into these 5 miliseconds.
+disk seek, which easily takes 5 milliseconds. There are a LOT of cpu cycles
+that can go into these 5 milliseconds.
 
 A reasonable rule of thumb is to not put inline at functions that have more
 than 3 lines of code in them. An exception to this rule are the cases where
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 25fb8bcf32a..5aceb88b3f8 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -676,8 +676,8 @@ this directory the following files can currently be found:
 	dma-api/all_errors	This file contains a numeric value. If this
 				value is not equal to zero the debugging code
 				will print a warning for every error it finds
-				into the kernel log. Be carefull with this
-				option. It can easily flood your logs.
+				into the kernel log. Be careful with this
+				option, as it can easily flood your logs.
 
 	dma-api/disabled	This read-only file contains the character 'Y'
 				if the debugging code is disabled. This can
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
index 6389dec3345..93cb28d05dc 100644
--- a/Documentation/RCU/rculist_nulls.txt
+++ b/Documentation/RCU/rculist_nulls.txt
@@ -118,7 +118,7 @@ to another chain) checking the final 'nulls' value if
 the lookup met the end of chain. If final 'nulls' value
 is not the slot number, then we must restart the lookup at
 the beginning. If the object was moved to the same chain,
-then the reader doesnt care : It might eventually
+then the reader doesn't care : It might eventually
 scan the list again without harm.
 
 
diff --git a/Documentation/SM501.txt b/Documentation/SM501.txt
index 6fc65603592..561826f8209 100644
--- a/Documentation/SM501.txt
+++ b/Documentation/SM501.txt
@@ -5,7 +5,7 @@ Copyright 2006, 2007 Simtec Electronics
 
 The Silicon Motion SM501 multimedia companion chip is a multifunction device
 which may provide numerous interfaces including USB host controller USB gadget,
-Asyncronous Serial ports, Audio functions and a dual display video interface.
+asynchronous serial ports, audio functions, and a dual display video interface.
 The device may be connected by PCI or local bus with varying functions enabled.
 
 Core
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 6c456835c1f..5c555a8b39e 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -187,8 +187,9 @@ Even if the maintainer did not respond in step #4, make sure to ALWAYS
 copy the maintainer when you change their code.
 
 For small patches you may want to CC the Trivial Patch Monkey
-trivial@kernel.org managed by Jesper Juhl; which collects "trivial"
-patches. Trivial patches must qualify for one of the following rules:
+trivial@kernel.org which collects "trivial" patches. Have a look
+into the MAINTAINERS file for its current manager.
+Trivial patches must qualify for one of the following rules:
  Spelling fixes in documentation
  Spelling fixes which could break grep(1)
  Warning fixes (cluttering with useless warnings is bad)
@@ -200,7 +201,6 @@ patches. Trivial patches must qualify for one of the following rules:
  since people copy, as long as it's trivial)
  Any fix by the author/maintainer of the file (ie. patch monkey
  in re-transmission mode)
-URL: <http://www.kernel.org/pub/linux/kernel/people/juhl/trivial/>
 
 
 
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index ea7ccfc4b27..948c8718d96 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -51,7 +51,7 @@ PIN Numbers
 -----------
 
   Each pin has an unique number associated with it in regs-gpio.h,
-  eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell
+  eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
   the GPIO functions which pin is to be used.
 
 
@@ -65,11 +65,11 @@ Configuring a pin
 
   Eg:
 
-     s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
-     s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+     s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+     s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
 
-   which would turn GPA0 into the lowest Address line A0, and set
-   GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line.
+   which would turn GPA(0) into the lowest Address line A0, and set
+   GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
 
 
 Reading the current configuration
diff --git a/Documentation/block/deadline-iosched.txt b/Documentation/block/deadline-iosched.txt
index 72576769e0f..2d82c80322c 100644
--- a/Documentation/block/deadline-iosched.txt
+++ b/Documentation/block/deadline-iosched.txt
@@ -58,7 +58,7 @@ same criteria as reads.
 front_merges	(bool)
 ------------
 
-Sometimes it happens that a request enters the io scheduler that is contigious
+Sometimes it happens that a request enters the io scheduler that is contiguous
 with a request that is already on the queue. Either it fits in the back of that
 request, or it fits at the front. That is called either a back merge candidate
 or a front merge candidate. Due to the way files are typically laid out,
diff --git a/Documentation/braille-console.txt b/Documentation/braille-console.txt
index 000b0fbdc10..d0d042c2fd5 100644
--- a/Documentation/braille-console.txt
+++ b/Documentation/braille-console.txt
@@ -27,7 +27,7 @@ parameter.
 
 For simplicity, only one braille console can be enabled, other uses of
 console=brl,... will be discarded.  Also note that it does not interfere with
-the console selection mecanism described in serial-console.txt
+the console selection mechanism described in serial-console.txt
 
 For now, only the VisioBraille device is supported.
 
diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt
index c11b931f8f9..15174985ad0 100644
--- a/Documentation/dell_rbu.txt
+++ b/Documentation/dell_rbu.txt
@@ -76,9 +76,9 @@ Do the steps below to download the BIOS image.
 
 The /sys/class/firmware/dell_rbu/ entries will remain till the following is
 done.
-echo -1 > /sys/class/firmware/dell_rbu/loading.
+echo -1 > /sys/class/firmware/dell_rbu/loading
 Until this step is completed the driver cannot be unloaded.
-Also echoing either mono ,packet or init in to image_type will free up the
+Also echoing either mono, packet or init in to image_type will free up the
 memory allocated by the driver.
 
 If a user by accident executes steps 1 and 3 above without executing step 2;
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 387b8a720f4..d79aead9418 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -188,7 +188,7 @@ For example, you can do something like the following.
 
   void my_midlayer_destroy_something()
   {
-	devres_release_group(dev, my_midlayer_create_soemthing);
+	devres_release_group(dev, my_midlayer_create_something);
   }
 
 
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 8eda3fb6641..06f8f46692d 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -23,8 +23,8 @@ first time, it was renamed to 'EDAC'.
 The bluesmoke project at sourceforge.net is now utilized as a 'staging area'
 for EDAC development, before it is sent upstream to kernel.org
 
-At the bluesmoke/EDAC project site, is a series of quilt patches against
-recent kernels, stored in a SVN respository. For easier downloading, there
+At the bluesmoke/EDAC project site is a series of quilt patches against
+recent kernels, stored in a SVN repository. For easier downloading, there
 is also a tarball snapshot available.
 
 ============================================================================
@@ -73,9 +73,9 @@ the vendor should tie the parity status bits to 0 if they do not intend
 to generate parity.  Some vendors do not do this, and thus the parity bit
 can "float" giving false positives.
 
-In the kernel there is a pci device attribute located in sysfs that is
+In the kernel there is a PCI device attribute located in sysfs that is
 checked by the EDAC PCI scanning code. If that attribute is set,
-PCI parity/error scannining is skipped for that device. The attribute
+PCI parity/error scanning is skipped for that device. The attribute
 is:
 
 	broken_parity_status
diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt
index c87bfe5c630..b994c3b1054 100644
--- a/Documentation/fb/sh7760fb.txt
+++ b/Documentation/fb/sh7760fb.txt
@@ -1,7 +1,7 @@
 SH7760/SH7763 integrated LCDC Framebuffer driver
 ================================================
 
-0. Overwiew
+0. Overview
 -----------
 The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
 supports (in theory) resolutions ranging from 1x1 to 1024x1024,
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index c6341745df3..8f78ded4b64 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -369,7 +369,7 @@ The call requires an initialized struct autofs_dev_ioctl. There are two
 possible variations. Both use the path field set to the path of the mount
 point to check and the size field adjusted appropriately. One uses the
 ioctlfd field to identify a specific mount point to check while the other
-variation uses the path and optionaly arg1 set to an autofs mount type.
+variation uses the path and optionally arg1 set to an autofs mount type.
 The call returns 1 if this is a mount point and sets arg1 to the device
 number of the mount and field arg2 to the relevant super block magic
 number (described below) or 0 if it isn't a mountpoint. In both cases
diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt
index 4db125b3a5c..2666b1ed5e9 100644
--- a/Documentation/filesystems/caching/netfs-api.txt
+++ b/Documentation/filesystems/caching/netfs-api.txt
@@ -184,7 +184,7 @@ This has the following fields:
      have index children.
 
      If this function is not supplied or if it returns NULL then the first
-     cache in the parent's list will be chosed, or failing that, the first
+     cache in the parent's list will be chosen, or failing that, the first
      cache in the master list.
 
  (4) A function to retrieve an object's key from the netfs [mandatory].
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 97882df0486..608fdba97b7 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -294,7 +294,7 @@ max_batch_time=usec	Maximum amount of time ext4 should wait for
 			amount of time (on average) that it takes to
 			finish committing a transaction.  Call this time
 			the "commit time".  If the time that the
-			transactoin has been running is less than the
+			transaction has been running is less than the
 			commit time, ext4 will try sleeping for the
 			commit time to see if other operations will join
 			the transaction.   The commit time is capped by
@@ -328,7 +328,7 @@ noauto_da_alloc		replacing existing files via patterns such as
 			journal commit, in the default data=ordered
 			mode, the data blocks of the new file are forced
 			to disk before the rename() operation is
-			commited.  This provides roughly the same level
+			committed.  This provides roughly the same level
 			of guarantees as ext3, and avoids the
 			"zero-length" problem that can happen when a
 			system crashes before the delayed allocation
@@ -358,7 +358,7 @@ written to the journal first, and then to its final location.
 In the event of a crash, the journal can be replayed, bringing both data and
 metadata into a consistent state.  This mode is the slowest except when data
 needs to be read from and written to disk at the same time where it
-outperforms all others modes.  Curently ext4 does not have delayed
+outperforms all others modes.  Currently ext4 does not have delayed
 allocation support if this data journalling mode is selected.
 
 References
diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt
index 1e3defcfe50..606233cd461 100644
--- a/Documentation/filesystems/fiemap.txt
+++ b/Documentation/filesystems/fiemap.txt
@@ -204,7 +204,7 @@ fiemap_check_flags() helper:
 
 int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags);
 
-The struct fieinfo should be passed in as recieved from ioctl_fiemap(). The
+The struct fieinfo should be passed in as received from ioctl_fiemap(). The
 set of fiemap flags which the fs understands should be passed via fs_flags. If
 fiemap_check_flags finds invalid user flags, it will place the bad values in
 fieinfo->fi_flags and return -EBADR. If the file system gets -EBADR, from
diff --git a/Documentation/filesystems/nfs-rdma.txt b/Documentation/filesystems/nfs-rdma.txt
index 85eaeaddd27..e386f7e4bce 100644
--- a/Documentation/filesystems/nfs-rdma.txt
+++ b/Documentation/filesystems/nfs-rdma.txt
@@ -100,7 +100,7 @@ Installation
     $ sudo cp utils/mount/mount.nfs /sbin/mount.nfs
 
     In this location, mount.nfs will be invoked automatically for NFS mounts
-    by the system mount commmand.
+    by the system mount command.
 
     NOTE: mount.nfs and therefore nfs-utils-1.1.2 or greater is only needed
     on the NFS client machine. You do not need this specific version of
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index ce84cfc9eae..cd8717a3627 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -366,7 +366,7 @@ just those considered 'most important'.  The new vectors are:
   RES, CAL, TLB -- rescheduling, call and TLB flush interrupts are
   sent from one CPU to another per the needs of the OS.  Typically,
   their statistics are used by kernel developers and interested users to
-  determine the occurance of interrupt of the given type.
+  determine the occurrence of interrupts of the given type.
 
 The above IRQ vectors are displayed only when relevent.  For example,
 the threshold vector does not exist on x86_64 platforms.  Others are
@@ -551,7 +551,7 @@ Committed_AS: The amount of memory presently allocated on the system.
               memory once that memory has been successfully allocated.
 VmallocTotal: total size of vmalloc memory area
  VmallocUsed: amount of vmalloc area which is used
-VmallocChunk: largest contigious block of vmalloc area which is free
+VmallocChunk: largest contiguous block of vmalloc area which is free
 
 ..............................................................................
 
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 26e4b8bc53e..85354b32d73 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -72,7 +72,7 @@ The 'rom' file is special in that it provides read-only access to the device's
 ROM file, if available.  It's disabled by default, however, so applications
 should write the string "1" to the file to enable it before attempting a read
 call, and disable it following the access by writing "0" to the file.  Note
-that the device must be enabled for a rom read to return data succesfully.
+that the device must be enabled for a rom read to return data successfully.
 In the event a driver is not bound to the device, it can be enabled using the
 'enable' file, documented above.
 
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index 3a5ddc96901..5147be5e13c 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -124,10 +124,10 @@ sys_immutable -- If set, ATTR_SYS attribute on FAT is handled as
 flush         -- If set, the filesystem will try to flush to disk more
 		 early than normal. Not set by default.
 
-rodir	      -- FAT has the ATTR_RO (read-only) attribute. But on Windows,
-		 the ATTR_RO of the directory will be just ignored actually,
-		 and is used by only applications as flag. E.g. it's setted
-		 for the customized folder.
+rodir	      -- FAT has the ATTR_RO (read-only) attribute. On Windows,
+		 the ATTR_RO of the directory will just be ignored,
+		 and is used only by applications as a flag (e.g. it's set
+		 for the customized folder).
 
 		 If you want to use ATTR_RO as read-only flag even for
 		 the directory, set this option.
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 145c25a170c..e4b6985044a 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -458,7 +458,7 @@ debugfs interface, since it provides control over GPIO direction and
 value instead of just showing a gpio state summary.  Plus, it could be
 present on production systems without debugging support.
 
-Given approprate hardware documentation for the system, userspace could
+Given appropriate hardware documentation for the system, userspace could
 know for example that GPIO #23 controls the write protect line used to
 protect boot loader segments in flash memory.  System upgrade procedures
 may need to temporarily remove that protection, first importing a GPIO,
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 3f4bc840da8..cab61d84225 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -108,7 +108,7 @@ There are two possible methods of using Kdump.
 
 2) Or use the system kernel binary itself as dump-capture kernel and there is
    no need to build a separate dump-capture kernel. This is possible
-   only with the architecutres which support a relocatable kernel. As
+   only with the architectures which support a relocatable kernel. As
    of today, i386, x86_64, ppc64 and ia64 architectures support relocatable
    kernel.
 
@@ -222,7 +222,7 @@ Dump-capture kernel config options (Arch Dependent, ia64)
 ----------------------------------------------------------
 
 - No specific options are required to create a dump-capture kernel
-  for ia64, other than those specified in the arch idependent section
+  for ia64, other than those specified in the arch independent section
   above. This means that it is possible to use the system kernel
   as a dump-capture kernel if desired.
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 0bf8a882ee9..5f66ba295c5 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1073,7 +1073,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	kgdboc=		[HW] kgdb over consoles.
 			Requires a tty driver that supports console polling.
-			(only serial suported for now)
+			(only serial supported for now)
 			Format: <serial_device>[,baud]
 
 	kmac=		[MIPS] korina ethernet MAC address.
@@ -1402,7 +1402,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			('y', default) or cooked coordinates ('n')
 
 	mtrr_chunk_size=nn[KMG] [X86]
-			used for mtrr cleanup. It is largest continous chunk
+			used for mtrr cleanup. It is largest continuous chunk
 			that could hold holes aka. UC entries.
 
 	mtrr_gran_size=nn[KMG] [X86]
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index b2e374586bd..c79ab996dad 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -132,7 +132,7 @@ kobject_name():
     const char *kobject_name(const struct kobject * kobj);
 
 There is a helper function to both initialize and add the kobject to the
-kernel at the same time, called supprisingly enough kobject_init_and_add():
+kernel at the same time, called surprisingly enough kobject_init_and_add():
 
     int kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype,
                              struct kobject *parent, const char *fmt, ...);
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 5ee2a02b3b4..0768fcc3ba3 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -40,7 +40,7 @@ NOTE: The Acer Aspire One is not supported hardware. It cannot work with
 acer-wmi until Acer fix their ACPI-WMI implementation on them, so has been
 blacklisted until that happens.
 
-Please see the website for the current list of known working hardare:
+Please see the website for the current list of known working hardware:
 
 http://code.google.com/p/aceracpi/wiki/SupportedHardware
 
diff --git a/Documentation/laptops/sony-laptop.txt b/Documentation/laptops/sony-laptop.txt
index 8b2bc1572d9..23ce7d350d1 100644
--- a/Documentation/laptops/sony-laptop.txt
+++ b/Documentation/laptops/sony-laptop.txt
@@ -22,7 +22,7 @@ If your laptop model supports it, you will find sysfs files in the
 /sys/class/backlight/sony/
 directory. You will be able to query and set the current screen
 brightness:
-	brightness		get/set screen brightness (an iteger
+	brightness		get/set screen brightness (an integer
 				between 0 and 7)
 	actual_brightness	reading from this file will query the HW
 				to get real brightness value
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index e7e9a69069e..78e354b42f6 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -506,7 +506,7 @@ generate input device EV_KEY events.
 In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
 events for switches:
 
-SW_RFKILL_ALL	T60 and later hardare rfkill rocker switch
+SW_RFKILL_ALL	T60 and later hardware rfkill rocker switch
 SW_TABLET_MODE	Tablet ThinkPads HKEY events 0x5009 and 0x500A
 
 Non hot-key ACPI HKEY event map:
diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt
index 23045b8b50f..300da4bdfdb 100644
--- a/Documentation/local_ops.txt
+++ b/Documentation/local_ops.txt
@@ -34,7 +34,7 @@ out of order wrt other memory writes by the owner CPU.
 
 It can be done by slightly modifying the standard atomic operations : only
 their UP variant must be kept. It typically means removing LOCK prefix (on
-i386 and x86_64) and any SMP sychronization barrier. If the architecture does
+i386 and x86_64) and any SMP synchronization barrier. If the architecture does
 not have a different behavior between SMP and UP, including asm-generic/local.h
 in your architecture's local.h is sufficient.
 
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index 4c2ecf537a4..bbc8a6a3692 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -73,13 +73,13 @@ this phase is triggered automatically. ACPI can notify this event. If not,
 (see Section 4.).
 
 Logical Memory Hotplug phase is to change memory state into
-avaiable/unavailable for users. Amount of memory from user's view is
+available/unavailable for users. Amount of memory from user's view is
 changed by this phase. The kernel makes all memory in it as free pages
 when a memory range is available.
 
 In this document, this phase is described as online/offline.
 
-Logical Memory Hotplug phase is triggred by write of sysfs file by system
+Logical Memory Hotplug phase is triggered by write of sysfs file by system
 administrator. For the hot-add case, it must be executed after Physical Hotplug
 phase by hand.
 (However, if you writes udev's hotplug scripts for memory hotplug, these
@@ -334,7 +334,7 @@ MEMORY_CANCEL_ONLINE
   Generated if MEMORY_GOING_ONLINE fails.
 
 MEMORY_ONLINE
-  Generated when memory has succesfully brought online. The callback may
+  Generated when memory has successfully brought online. The callback may
   allocate pages from the new memory.
 
 MEMORY_GOING_OFFLINE
@@ -359,7 +359,7 @@ The third argument is passed by pointer of struct memory_notify.
 struct memory_notify {
        unsigned long start_pfn;
        unsigned long nr_pages;
-       int status_cahnge_nid;
+       int status_change_nid;
 }
 
 start_pfn is start_pfn of online/offline memory.
diff --git a/Documentation/mn10300/ABI.txt b/Documentation/mn10300/ABI.txt
index 1fef1f06dfd..d3507bad428 100644
--- a/Documentation/mn10300/ABI.txt
+++ b/Documentation/mn10300/ABI.txt
@@ -26,7 +26,7 @@ registers and the stack. If the first argument is a 64-bit value, it will be
 passed in D0:D1. If the first argument is not a 64-bit value, but the second
 is, the second will be passed entirely on the stack and D1 will be unused.
 
-Arguments smaller than 32-bits are not coelesced within a register or a stack
+Arguments smaller than 32-bits are not coalesced within a register or a stack
 word. For example, two byte-sized arguments will always be passed in separate
 registers or word-sized stack slots.
 
diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/mtd/nand_ecc.txt
index bdf93b7f0f2..274821b35a7 100644
--- a/Documentation/mtd/nand_ecc.txt
+++ b/Documentation/mtd/nand_ecc.txt
@@ -50,7 +50,7 @@ byte 255:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp1 rp3 rp5 ... rp15
            cp5  cp5  cp5  cp5  cp4  cp4  cp4  cp4
 
 This figure represents a sector of 256 bytes.
-cp is my abbreviaton for column parity, rp for row parity.
+cp is my abbreviation for column parity, rp for row parity.
 
 Let's start to explain column parity.
 cp0 is the parity that belongs to all bit0, bit2, bit4, bit6.
@@ -560,7 +560,7 @@ Measuring this code again showed big gain. When executing the original
 linux code 1 million times, this took about 1 second on my system.
 (using time to measure the performance). After this iteration I was back
 to 0.075 sec. Actually I had to decide to start measuring over 10
-million interations in order not to loose too much accuracy. This one
+million iterations in order not to lose too much accuracy. This one
 definitely seemed to be the jackpot!
 
 There is a little bit more room for improvement though. There are three
@@ -571,8 +571,8 @@ loop; This eliminates 3 statements per loop. Of course after the loop we
 need to correct by adding:
     rp4 ^= rp4_6;
     rp6 ^= rp4_6
-Furthermore there are 4 sequential assingments to rp8. This can be
-encoded slightly more efficient by saving tmppar before those 4 lines
+Furthermore there are 4 sequential assignments to rp8. This can be
+encoded slightly more efficiently by saving tmppar before those 4 lines
 and later do rp8 = rp8 ^ tmppar ^ notrp8;
 (where notrp8 is the value of rp8 before those 4 lines).
 Again a use of the commutative property of xor.
@@ -622,7 +622,7 @@ Not a big change, but every penny counts :-)
 Analysis 7
 ==========
 
-Acutally this made things worse. Not very much, but I don't want to move
+Actually this made things worse. Not very much, but I don't want to move
 into the wrong direction. Maybe something to investigate later. Could
 have to do with caching again.
 
@@ -642,7 +642,7 @@ Analysis 8
 This makes things worse. Let's stick with attempt 6 and continue from there.
 Although it seems that the code within the loop cannot be optimised
 further there is still room to optimize the generation of the ecc codes.
-We can simply calcualate the total parity. If this is 0 then rp4 = rp5
+We can simply calculate the total parity. If this is 0 then rp4 = rp5
 etc. If the parity is 1, then rp4 = !rp5;
 But if rp4 = rp5 we do not need rp5 etc. We can just write the even bits
 in the result byte and then do something like
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 08762750f12..d5181ce9ff6 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -221,7 +221,7 @@ ad_select
 
 		- Any slave's 802.3ad association state changes
 
-		- The bond's adminstrative state changes to up
+		- The bond's administrative state changes to up
 
 	count or 2
 
@@ -369,7 +369,7 @@ fail_over_mac
 		When this policy is used in conjuction with the mii
 		monitor, devices which assert link up prior to being
 		able to actually transmit and receive are particularly
-		susecptible to loss of the gratuitous ARP, and an
+		susceptible to loss of the gratuitous ARP, and an
 		appropriate updelay setting may be required.
 
 	follow or 2
@@ -1794,7 +1794,7 @@ target to query.
 generally referred to as "trunk failover."  This is a feature of the
 switch that causes the link state of a particular switch port to be set
 down (or up) when the state of another switch port goes down (or up).
-It's purpose is to propogate link failures from logically "exterior" ports
+Its purpose is to propagate link failures from logically "exterior" ports
 to the logically "interior" ports that bonding is able to monitor via
 miimon.  Availability and configuration for trunk failover varies by
 switch, but this can be a viable alternative to the ARP monitor when using
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 2035bc4932f..463d9e029ef 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -327,7 +327,7 @@ solution for a couple of reasons:
             return 1;
     }
 
-    /* paraniod check ... */
+    /* paranoid check ... */
     if (nbytes < sizeof(struct can_frame)) {
             fprintf(stderr, "read: incomplete CAN frame\n");
             return 1;
diff --git a/Documentation/networking/dm9000.txt b/Documentation/networking/dm9000.txt
index 65df3dea556..5552e2e575c 100644
--- a/Documentation/networking/dm9000.txt
+++ b/Documentation/networking/dm9000.txt
@@ -129,7 +129,7 @@ PHY Link state polling
 ----------------------
 
 The driver keeps track of the link state and informs the network core
-about link (carrier) availablilty. This is managed by several methods
+about link (carrier) availability. This is managed by several methods
 depending on the version of the chip and on which PHY is being used.
 
 For the internal PHY, the original (and currently default) method is
diff --git a/Documentation/networking/l2tp.txt b/Documentation/networking/l2tp.txt
index 2451f551c50..63214b280e0 100644
--- a/Documentation/networking/l2tp.txt
+++ b/Documentation/networking/l2tp.txt
@@ -158,7 +158,7 @@ Sample Userspace Code
         }
         return 0;
 
-Miscellanous
+Miscellaneous
 ============
 
 The PPPoL2TP driver was developed as part of the OpenL2TP project by
diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt
index a2ab6a0b116..87b3d15f523 100644
--- a/Documentation/networking/netdevices.txt
+++ b/Documentation/networking/netdevices.txt
@@ -74,7 +74,7 @@ dev->hard_start_xmit:
 	for this and return NETDEV_TX_LOCKED when the spin lock fails.
 	The locking there should also properly protect against 
 	set_multicast_list. Note that the use of NETIF_F_LLTX is deprecated.
-	Dont use it for new drivers.
+	Don't use it for new drivers.
 
 	Context: Process with BHs disabled or BH (timer),
 	         will be called with interrupts disabled by netconsole.
diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt
index 6a07e45d4a9..6e8ce09f9c7 100644
--- a/Documentation/networking/phonet.txt
+++ b/Documentation/networking/phonet.txt
@@ -36,7 +36,7 @@ Phonet packets have a common header as follows:
 On Linux, the link-layer header includes the pn_media byte (see below).
 The next 7 bytes are part of the network-layer header.
 
-The device ID is split: the 6 higher-order bits consitute the device
+The device ID is split: the 6 higher-order bits constitute the device
 address, while the 2 lower-order bits are used for multiplexing, as are
 the 8-bit object identifiers. As such, Phonet can be considered as a
 network layer with 6 bits of address space and 10 bits for transport
diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt
index dcf31648414..eaa1a25946c 100644
--- a/Documentation/networking/regulatory.txt
+++ b/Documentation/networking/regulatory.txt
@@ -89,7 +89,7 @@ added to this document when its support is enabled.
 Device drivers who provide their own built regulatory domain
 do not need a callback as the channels registered by them are
 the only ones that will be allowed and therefore *additional*
-cannels cannot be enabled.
+channels cannot be enabled.
 
 Example code - drivers hinting an alpha2:
 ------------------------------------------
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
index 82b7a43aadb..5f83fd24ea8 100644
--- a/Documentation/power/regulator/consumer.txt
+++ b/Documentation/power/regulator/consumer.txt
@@ -178,5 +178,5 @@ Consumers can uregister interest by calling :-
 int regulator_unregister_notifier(struct regulator *regulator,
 				struct notifier_block *nb);
 
-Regulators use the kernel notifier framework to send event to thier interested
+Regulators use the kernel notifier framework to send event to their interested
 consumers.
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
index bdcb332bd7f..0cded696ca0 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -119,7 +119,7 @@ Some terms used in this document:-
                    battery power, USB power)
 
                    Regulator Domains: is the new current limit within the
-                   regulator operating parameters for input/ouput voltage.
+                   regulator operating parameters for input/output voltage.
 
                    If the regulator request passes all the constraint tests
                    then the new regulator value is applied.
diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt
index 2ebdc6091ce..514b94fc931 100644
--- a/Documentation/power/s2ram.txt
+++ b/Documentation/power/s2ram.txt
@@ -63,7 +63,7 @@ hardware during resume operations where a value can be set that will
 survive a reboot.
 
 Consequence is that after a resume (even if it is successful) your system
-clock will have a value corresponding to the magic mumber instead of the
+clock will have a value corresponding to the magic number instead of the
 correct date/time! It is therefore advisable to use a program like ntp-date
 or rdate to reset the correct date/time from an external time source when
 using this trace option.
diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt
index 7b99636564c..b967cd9137d 100644
--- a/Documentation/power/userland-swsusp.txt
+++ b/Documentation/power/userland-swsusp.txt
@@ -109,7 +109,7 @@ unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are
 still frozen when the device is being closed).
 
 Currently it is assumed that the userland utilities reading/writing the
-snapshot image from/to the kernel will use a swap parition, called the resume
+snapshot image from/to the kernel will use a swap partition, called the resume
 partition, or a swap file as storage space (if a swap file is used, the resume
 partition is the partition that holds this file).  However, this is not really
 required, as they can use, for example, a special (blank) suspend partition or
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index d16b7a1c379..8d999d862d0 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1356,7 +1356,7 @@ platforms are moved over to use the flattened-device-tree model.
     - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
 			  for, used if phy-address is absent. bit 0x00000001 is
 			  MDIO address 0.
-			  For Axon it can be absent, thouugh my current driver
+			  For Axon it can be absent, though my current driver
 			  doesn't handle phy-address yet so for now, keep
 			  0x00ffffff in it.
     - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
@@ -1438,7 +1438,7 @@ platforms are moved over to use the flattened-device-tree model.
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
-   of standard device types (network, serial, etc.) and miscellanious
+   of standard device types (network, serial, etc.) and miscellaneous
    devices (gpio, LCD, spi, etc).  Also, since these devices are
    implemented within the fpga fabric every instance of the device can be
    synthesised with different options that change the behaviour.
diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt
index 6c974d28eeb..e8b5bc24d0a 100644
--- a/Documentation/powerpc/dts-bindings/fsl/board.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/board.txt
@@ -38,7 +38,7 @@ Required properities:
 - reg : Should contain the address and the length of the GPIO bank
   register.
 - #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional paramters (currently unused).
+  second cell is used to specify optional parameters (currently unused).
 - gpio-controller : Marks the port as GPIO controller.
 
 Example:
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
index 088fc471e03..160c752484b 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
@@ -19,7 +19,7 @@ Example:
 	reg = <119c0 30>;
      }
 
-* Properties common to mulitple CPM/QE devices
+* Properties common to multiple CPM/QE devices
 
 - fsl,cpm-command : This value is ORed with the opcode and command flag
                     to specify the device on which a CPM command operates.
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
index 1815dfede1b..349f79fd707 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
@@ -11,7 +11,7 @@ Required properties:
   "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
   "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
 - #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional paramters (currently unused).
+  second cell is used to specify optional parameters (currently unused).
 - gpio-controller : Marks the port as GPIO controller.
 
 Example of three SOC GPIO banks defined as gpio-controller nodes:
diff --git a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
index b26b91992c5..bcc30bac683 100644
--- a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
@@ -1,6 +1,6 @@
 * Freescale MSI interrupt controller
 
-Reguired properities:
+Required properties:
 - compatible : compatible list, contains 2 entries,
   first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
   etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
diff --git a/Documentation/powerpc/dts-bindings/fsl/pmc.txt b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
index 02f6f43ee1b..07256b7ffca 100644
--- a/Documentation/powerpc/dts-bindings/fsl/pmc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
@@ -15,8 +15,8 @@ Properties:
   compatible; all statements below that apply to "fsl,mpc8548-pmc" also
   apply to "fsl,mpc8641d-pmc".
 
-  Compatibility does not include bit assigments in SCCR/PMCDR/DEVDISR; these
-  bit assigments are indicated via the sleep specifier in each device's
+  Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
+  bit assignments are indicated via the sleep specifier in each device's
   sleep property.
 
 - reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt
index 06da4d4b44f..2031ddb33d0 100644
--- a/Documentation/powerpc/qe_firmware.txt
+++ b/Documentation/powerpc/qe_firmware.txt
@@ -225,7 +225,7 @@ For example, to match the 8323, revision 1.0:
      soc.major = 1
      soc.minor = 0
 
-'padding' is neccessary for structure alignment.  This field ensures that the
+'padding' is necessary for structure alignment.  This field ensures that the
 'extended_modes' field is aligned on a 64-bit boundary.
 
 'extended_modes' is a bitfield that defines special functionality which has an
diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt
index 7224459b469..aae8355d316 100644
--- a/Documentation/rbtree.txt
+++ b/Documentation/rbtree.txt
@@ -131,8 +131,8 @@ Example:
   	}
 
   	/* Add new node and rebalance tree. */
-  	rb_link_node(data->node, parent, new);
-  	rb_insert_color(data->node, root);
+  	rb_link_node(&data->node, parent, new);
+  	rb_insert_color(&data->node, root);
 
 	return TRUE;
   }
@@ -146,10 +146,10 @@ To remove an existing node from a tree, call:
 
 Example:
 
-  struct mytype *data = mysearch(mytree, "walrus");
+  struct mytype *data = mysearch(&mytree, "walrus");
 
   if (data) {
-  	rb_erase(data->node, mytree);
+  	rb_erase(&data->node, &mytree);
   	myfree(data);
   }
 
@@ -188,5 +188,5 @@ Example:
 
   struct rb_node *node;
   for (node = rb_first(&mytree); node; node = rb_next(node))
-  	printk("key=%s\n", rb_entry(node, int, keystring));
+	printk("key=%s\n", rb_entry(node, struct mytype, node)->keystring);
 
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 10711d9f078..1eb576a023b 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -1984,7 +1984,7 @@ break *$pc
 
 break *0x400618
 
-heres a really useful one for large programs
+Here's a really useful one for large programs
 rbr
 Set a breakpoint for all functions matching REGEXP
 e.g.
@@ -2211,7 +2211,7 @@ Breakpoint 2 at 0x4d87a4: file top.c, line 2609.
 #5  0x51692c in readline_internal () at readline.c:521
 #6  0x5164fe in readline (prompt=0x7ffff810 "\177ÿøx\177ÿ÷Ø\177ÿøxÀ")
     at readline.c:349
-#7  0x4d7a8a in command_line_input (prrompt=0x564420 "(gdb) ", repeat=1,
+#7  0x4d7a8a in command_line_input (prompt=0x564420 "(gdb) ", repeat=1,
     annotation_suffix=0x4d6b44 "prompt") at top.c:2091
 #8  0x4d6cf0 in command_loop () at top.c:1345
 #9  0x4e25bc in main (argc=1, argv=0x7ffffdf4) at main.c:635
diff --git a/Documentation/scheduler/sched-nice-design.txt b/Documentation/scheduler/sched-nice-design.txt
index e2bae5a577e..3ac1e46d536 100644
--- a/Documentation/scheduler/sched-nice-design.txt
+++ b/Documentation/scheduler/sched-nice-design.txt
@@ -55,7 +55,7 @@ To sum it up: we always wanted to make nice levels more consistent, but
 within the constraints of HZ and jiffies and their nasty design level
 coupling to timeslices and granularity it was not really viable.
 
-The second (less frequent but still periodically occuring) complaint
+The second (less frequent but still periodically occurring) complaint
 about Linux's nice level support was its assymetry around the origo
 (which you can see demonstrated in the picture above), or more
 accurately: the fact that nice level behavior depended on the _absolute_
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index 683ccae00ad..c014eccaf19 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -194,7 +194,7 @@ The following information is available in this file:
           - Packetized SCSI Protocol at 160MB/s and 320MB/s
           - Quick Arbitration Selection (QAS)
           - Retained Training Information (Rev B. ASIC only)
-        - Interrupt Coalessing
+        - Interrupt Coalescing
         - Initiator Mode (target mode not currently 
           supported)
         - Support for the PCI-X standard up to 133MHz
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index 230e30846ef..08e2b4d04aa 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -206,7 +206,7 @@ of MOVE MEMORY instructions.
 The 896 and the 895A allows handling of the phase mismatch context from 
 SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor 
 until the C code has saved the context of the transfer).
-Implementing this without using LOAD/STORE instructions would be painfull 
+Implementing this without using LOAD/STORE instructions would be painful 
 and I didn't even want to try it.
 
 The 896 chip supports 64 bit PCI transactions and addressing, while the 
@@ -240,7 +240,7 @@ characteristics. This feature may also reduce average command latency.
 In order to really gain advantage of this feature, devices must have 
 a reasonable cache size (No miracle is to be expected for a low-end 
 hard disk with 128 KB or less).
-Some kown SCSI devices do not properly support tagged command queuing.
+Some known SCSI devices do not properly support tagged command queuing.
 Generally, firmware revisions that fix this kind of problems are available 
 at respective vendor web/ftp sites.
 All I can say is that the hard disks I use on my machines behave well with 
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index 49ea5c58c6b..eb9a7b905b6 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -206,7 +206,7 @@ characteristics. This feature may also reduce average command latency.
 In order to really gain advantage of this feature, devices must have 
 a reasonable cache size (No miracle is to be expected for a low-end 
 hard disk with 128 KB or less).
-Some kown old SCSI devices do not properly support tagged command queuing.
+Some known old SCSI devices do not properly support tagged command queuing.
 Generally, firmware revisions that fix this kind of problems are available 
 at respective vendor web/ftp sites.
 All I can say is that I never have had problem with tagged queuing using 
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 5c08d96f407..4252697a95d 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -773,7 +773,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     single_cmd  - Use single immediate commands to communicate with
 		codecs (for debugging only)
     enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
-    power_save	- Automatic power-saving timtout (in second, 0 =
+    power_save	- Automatic power-saving timeout (in second, 0 =
 		disable)
     power_save_controller - Reset HD-audio controller in power-saving mode
 		(default = on)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 88b7433d2f1..71ac995b191 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -16,7 +16,7 @@ methods for the	HD-audio hardware.
 The HD-audio component consists of two parts: the controller chip and 
 the codec chips on the HD-audio bus.  Linux provides a single driver
 for all controllers, snd-hda-intel.  Although the driver name contains
-a word of a well-known harware vendor, it's not specific to it but for
+a word of a well-known hardware vendor, it's not specific to it but for
 all controller chips by other companies.  Since the HD-audio
 controllers are supposed to be compatible, the single snd-hda-driver
 should work in most cases.  But, not surprisingly, there are known
diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt
index 34e87ec1379..de8efbc7e4b 100644
--- a/Documentation/sound/alsa/hda_codec.txt
+++ b/Documentation/sound/alsa/hda_codec.txt
@@ -114,7 +114,7 @@ For writing a sequence of verbs, use snd_hda_sequence_write().
 
 There are variants of cached read/write, snd_hda_codec_write_cache(),
 snd_hda_sequence_write_cache().  These are used for recording the
-register states for the power-mangement resume.  When no PM is needed,
+register states for the power-management resume.  When no PM is needed,
 these are equivalent with non-cached version.
 
 To retrieve the number of sub nodes connected to the given node, use
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index c302ddf629a..6fab2dcbb4d 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -358,7 +358,7 @@ nr_pdflush_threads
 The current number of pdflush threads.  This value is read-only.
 The value changes according to the number of dirty pages in the system.
 
-When neccessary, additional pdflush threads are created, one per second, up to
+When necessary, additional pdflush threads are created, one per second, up to
 nr_pdflush_threads_max.
 
 ==============================================================
@@ -565,7 +565,7 @@ swappiness
 
 This control is used to define how aggressive the kernel will swap
 memory pages.  Higher values will increase agressiveness, lower values
-descrease the amount of swap.
+decrease the amount of swap.
 
 The default value is 60.
 
diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt
index e7c09abcfab..04763a32552 100644
--- a/Documentation/timers/hpet.txt
+++ b/Documentation/timers/hpet.txt
@@ -7,7 +7,7 @@ by Intel and Microsoft which can be found at
 
 Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
 and up to 32 comparators.  Normally three or more comparators are provided,
-each of which can generate oneshot interupts and at least one of which has
+each of which can generate oneshot interrupts and at least one of which has
 additional hardware to support periodic interrupts.  The comparators are
 also called "timers", which can be misleading since usually timers are
 independent of each other ... these share a counter, complicating resets.
diff --git a/Documentation/timers/timer_stats.txt b/Documentation/timers/timer_stats.txt
index 20d368c5981..9bd00fc2e82 100644
--- a/Documentation/timers/timer_stats.txt
+++ b/Documentation/timers/timer_stats.txt
@@ -62,7 +62,7 @@ Timerstats sample period: 3.888770 s
 
 The first column is the number of events, the second column the pid, the third
 column is the name of the process. The forth column shows the function which
-initialized the timer and in parantheses the callback function which was
+initialized the timer and in parenthesis the callback function which was
 executed on expiry.
 
     Thomas, Ingo
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 2a82d860294..7bd27f0e288 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -1834,4 +1834,4 @@ an error.
 -----------
 
 More details can be found in the source code, in the
-kernel/tracing/*.c files.
+kernel/trace/*.c files.
diff --git a/Documentation/trace/kmemtrace.txt b/Documentation/trace/kmemtrace.txt
index a956d9b7f94..6308735e58c 100644
--- a/Documentation/trace/kmemtrace.txt
+++ b/Documentation/trace/kmemtrace.txt
@@ -64,7 +64,7 @@ III. Quick usage guide
 CONFIG_KMEMTRACE).
 
 2) Get the userspace tool and build it:
-$ git-clone git://repo.or.cz/kmemtrace-user.git		# current repository
+$ git clone git://repo.or.cz/kmemtrace-user.git		# current repository
 $ cd kmemtrace-user/
 $ ./autogen.sh
 $ ./configure
diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt
index 4c3d62c7843..c480e9c32db 100644
--- a/Documentation/usb/WUSB-Design-overview.txt
+++ b/Documentation/usb/WUSB-Design-overview.txt
@@ -84,7 +84,7 @@ The different logical parts of this driver are:
 
       *UWB*: the Ultra-Wide-Band stack -- manages the radio and
       associated spectrum to allow for devices sharing it. Allows to
-      control bandwidth assingment, beaconing, scanning, etc
+      control bandwidth assignment, beaconing, scanning, etc
 
     *
 
@@ -184,7 +184,7 @@ and sends the replies and notifications back to the API
 [/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that
 is chartered, among other things, to keep the tab of how the UWB radio
 neighborhood looks, creating and destroying devices as they show up or
-dissapear.
+disappear.
 
 Command execution is very simple: a command block is sent and a event
 block or reply is expected back. For sending/receiving command/events, a
@@ -333,7 +333,7 @@ read descriptors and move our data.
 
 *Device life cycle and keep alives*
 
-Everytime there is a succesful transfer to/from a device, we update a
+Every time there is a successful transfer to/from a device, we update a
 per-device activity timestamp. If not, every now and then we check and
 if the activity timestamp gets old, we ping the device by sending it a
 Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this
@@ -411,7 +411,7 @@ context (wa_xfer) and submit it. When the xfer is done, our callback is
 called and we assign the status bits and release the xfer resources.
 
 In dequeue() we are basically cancelling/aborting the transfer. We issue
-a xfer abort request to the HC, cancell all the URBs we had submitted
+a xfer abort request to the HC, cancel all the URBs we had submitted
 and not yet done and when all that is done, the xfer callback will be
 called--this will call the URB callback.
 
diff --git a/Documentation/usb/anchors.txt b/Documentation/usb/anchors.txt
index 6f24f566955..fe6a99a32bb 100644
--- a/Documentation/usb/anchors.txt
+++ b/Documentation/usb/anchors.txt
@@ -27,7 +27,7 @@ Association and disassociation of URBs with anchors
 
 An association of URBs to an anchor is made by an explicit
 call to usb_anchor_urb(). The association is maintained until
-an URB is finished by (successfull) completion. Thus disassociation
+an URB is finished by (successful) completion. Thus disassociation
 is automatic. A function is provided to forcibly finish (kill)
 all URBs associated with an anchor.
 Furthermore, disassociation can be made with usb_unanchor_urb()
@@ -76,4 +76,4 @@ usb_get_from_anchor()
 Returns the oldest anchored URB of an anchor. The URB is unanchored
 and returned with a reference. As you may mix URBs to several
 destinations in one anchor you have no guarantee the chronologically
-first submitted URB is returned.
\ No newline at end of file
+first submitted URB is returned.
diff --git a/Documentation/usb/callbacks.txt b/Documentation/usb/callbacks.txt
index 7c812411945..bfb36b34b79 100644
--- a/Documentation/usb/callbacks.txt
+++ b/Documentation/usb/callbacks.txt
@@ -65,7 +65,7 @@ Accept or decline an interface. If you accept the device return 0,
 otherwise -ENODEV or -ENXIO. Other error codes should be used only if a
 genuine error occurred during initialisation which prevented a driver
 from accepting a device that would else have been accepted.
-You are strongly encouraged to use usbcore'sfacility,
+You are strongly encouraged to use usbcore's facility,
 usb_set_intfdata(), to associate a data structure with an interface, so
 that you know which internal state and identity you associate with a
 particular interface. The device will not be suspended and you may do IO
diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt
index 914cb7e734a..4652c0f5da3 100644
--- a/Documentation/video4linux/cx18.txt
+++ b/Documentation/video4linux/cx18.txt
@@ -11,7 +11,7 @@ encoder chip:
 2) Some people have problems getting the i2c bus to work.
    The symptom is that the eeprom cannot be read and the card is
    unusable. This is probably fixed, but if you have problems
-   then post to the video4linux or ivtv-users mailinglist.
+   then post to the video4linux or ivtv-users mailing list.
 
 3) VBI (raw or sliced) has not yet been implemented.
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 90f81283b72..a1fe87ad483 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -681,6 +681,13 @@ M:	sakoman@gmail.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
+P:	Philipp Zabel
+M:	philipp.zabel@gmail.com
+S:	Maintained
+F:	arch/arm/mach-pxa/hx4700.c
+F:	arch/arm/mach-pxa/include/mach/hx4700.h
+
 ARM/HP JORNADA 7XX MACHINE SUPPORT
 P:	Kristoffer Ericson
 M:	kristoffer.ericson@gmail.com
@@ -2105,6 +2112,15 @@ W:	http://sourceforge.net/projects/lpfcxxxx
 S:	Supported
 F:	drivers/scsi/lpfc/
 
+ENE CB710 FLASH CARD READER DRIVER
+P:	Michał Mirosław
+M:	mirq-linux@rere.qmqm.pl
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	drivers/misc/cb710/
+F:	drivers/mmc/host/cb710-mmc.*
+F:	include/linux/cb710.h
+
 EPSON 1355 FRAMEBUFFER DRIVER
 P:	Christopher Hoover
 M:	ch@murgatroid.com
@@ -2351,7 +2367,7 @@ F:	fs/freevxfs/
 
 FREEZER
 P:	Pavel Machek
-M:	pavel@suse.cz
+M:	pavel@ucw.cz
 P:	Rafael J. Wysocki
 M:	rjw@sisk.pl
 L:	linux-pm@lists.linux-foundation.org
@@ -4159,6 +4175,69 @@ S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
+OMAP SUPPORT
+P:	Tony Lindgren <tony@atomide.com>
+M:	tony@atomide.com
+L:	linux-omap@vger.kernel.org
+W:	http://www.muru.com/linux/omap/
+W:	http://linux.omap.com/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+S:	Maintained
+F:	arch/arm/*omap*
+
+OMAP CLOCK FRAMEWORK SUPPORT
+P:	Paul Walmsley
+M:	paul@pwsan.com
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/*omap*/*clock*
+
+OMAP POWER MANAGEMENT SUPPORT
+P:	Kevin Hilman
+M:	khilman@deeprootsystems.com
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/*omap*/*pm*
+
+OMAP AUDIO SUPPORT
+P:	Jarkko Nikula
+M:	jhnikula@gmail.com
+L:	alsa-devel@alsa-project.org (subscribers-only)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	sound/soc/omap/
+
+OMAP FRAMEBUFFER SUPPORT
+P:	Imre Deak
+M:	imre.deak@nokia.com
+L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/video/omap/
+
+OMAP MMC SUPPORT
+P:	Jarkko Lavinen
+M:	jarkko.lavinen@nokia.com
+L:	linux-kernel@vger.kernel.org
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/mmc/host/*omap*
+
+OMAP RANDOM NUMBER GENERATOR SUPPORT
+P:	Deepak Saxena
+M:	dsaxena@plexity.net
+S:	Maintained
+F:	drivers/char/hw_random/omap-rng.c
+
+OMAP USB SUPPORT
+P:	Felipe Balbi
+M:	felipe.balbi@nokia.com
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	linux-usb@vger.kernel.org
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+
 OMFS FILESYSTEM
 P:	Bob Copeland
 M:	me@bobcopeland.com
@@ -4597,7 +4676,7 @@ F:	drivers/media/video/pvrusb2/
 
 PXA2xx/PXA3xx SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 P:	Russell King
 M:	linux@arm.linux.org.uk
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
@@ -4612,19 +4691,19 @@ F:	sound/soc/pxa
 
 PXA168 SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 P:	Jason Chagas
 M:	jason.chagas@marvell.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S:	Supported
+S:	Maintained
 
 PXA910 SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S:	Supported
+S:	Maintained
 
 PXA MMCI DRIVER
 S:	Orphan
@@ -5145,7 +5224,6 @@ P:	Vincent Sanders
 M:	support@simtec.co.uk
 W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
-F:	arch/arm/mach-ebsa110/
 
 SIMTEC EB2410ITX (BAST)
 P:	Ben Dooks
@@ -5559,20 +5637,6 @@ F:	drivers/misc/tifm*
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
-TI OMAP MMC INTERFACE DRIVER
-P:	Carlos Aguiar, Anderson Briglia and Syed Khasim
-M:	linux-omap@vger.kernel.org
-W:	http://linux.omap.com
-W:	http://www.muru.com/linux/omap/
-S:	Maintained
-F:	drivers/mmc/host/omap.c
-
-TI OMAP RANDOM NUMBER GENERATOR SUPPORT
-P:	Deepak Saxena
-M:	dsaxena@plexity.net
-S:	Maintained
-F:	drivers/char/hw_random/omap-rng.c
-
 TIPC NETWORK LAYER
 P:	Per Liden
 M:	per.liden@ericsson.com
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9d02cdb15b2..29475101a7b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -34,15 +34,12 @@ config SYS_SUPPORTS_APM_EMULATION
 
 config GENERIC_GPIO
 	bool
-	default n
 
 config GENERIC_TIME
 	bool
-	default n
 
 config GENERIC_CLOCKEVENTS
 	bool
-	default n
 
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
@@ -55,7 +52,6 @@ config MMU
 
 config NO_IOPORT
 	bool
-	default n
 
 config EISA
 	bool
@@ -126,11 +122,9 @@ config RWSEM_XCHGADD_ALGORITHM
 
 config ARCH_HAS_ILOG2_U32
 	bool
-	default n
 
 config ARCH_HAS_ILOG2_U64
 	bool
-	default n
 
 config GENERIC_HWEIGHT
 	bool
@@ -253,6 +247,14 @@ config ARCH_CLPS711X
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
+config ARCH_GEMINI
+	bool "Cortina Systems Gemini"
+	select CPU_FA526
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for the Cortina Systems Gemini family SoCs
+
 config ARCH_EBSA110
 	bool "EBSA-110"
 	select CPU_SA110
@@ -277,14 +279,6 @@ config ARCH_EP93XX
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
-config ARCH_GEMINI
-	bool "Cortina Systems Gemini"
-	select CPU_FA526
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for the Cortina Systems Gemini family SoCs
-
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
@@ -293,6 +287,30 @@ config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
+config ARCH_MXC
+	bool "Freescale MXC/iMX-based"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select ARCH_MTD_XIP
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	help
+	  Support for Freescale MXC/iMX-based family of processors
+
+config ARCH_STMP3XXX
+	bool "Freescale STMP3xxx"
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select USB_ARCH_HAS_EHCI
+	help
+	  Support for systems based on the Freescale 3xxx CPUs.
+
 config ARCH_NETX
 	bool "Hilscher NetX based"
 	select CPU_ARM926T
@@ -309,15 +327,6 @@ config ARCH_H720X
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
-config ARCH_IMX
-	bool "IMX"
-	select CPU_ARM920T
-	select GENERIC_GPIO
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Motorola's i.MX family of processors (MX1, MXL).
-
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -398,6 +407,7 @@ config ARCH_KIRKWOOD
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -405,28 +415,6 @@ config ARCH_KIRKWOOD
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
 
-config ARCH_KS8695
-	bool "Micrel/Kendin KS8695"
-	select CPU_ARM922T
-	select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
-	  System-on-Chip devices.
-
-config ARCH_NS9XXX
-	bool "NetSilicon NS9xxx"
-	select CPU_ARM926T
-	select GENERIC_GPIO
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	help
-	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
-	  System.
-
-	  <http://www.digi.com/products/microprocessors/index.jsp>
-
 config ARCH_LOKI
 	bool "Marvell Loki (88RC8480)"
 	select CPU_FEROCEON
@@ -441,6 +429,7 @@ config ARCH_MV78XX0
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -448,23 +437,13 @@ config ARCH_MV78XX0
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
 
-config ARCH_MXC
-	bool "Freescale MXC/iMX-based"
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select ARCH_MTD_XIP
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	help
-	  Support for Freescale MXC/iMX-based family of processors
-
 config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -473,6 +452,52 @@ config ARCH_ORION5X
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
 	  Orion-2 (5281), Orion-1-90 (6183).
 
+config ARCH_MMP
+	bool "Marvell PXA168/910"
+	depends on MMU
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168/910 processor line.
+
+config ARCH_KS8695
+	bool "Micrel/Kendin KS8695"
+	select CPU_ARM922T
+	select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+	  System-on-Chip devices.
+
+config ARCH_NS9XXX
+	bool "NetSilicon NS9xxx"
+	select CPU_ARM926T
+	select GENERIC_GPIO
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	help
+	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+	  System.
+
+	  <http://www.digi.com/products/microprocessors/index.jsp>
+
+config ARCH_W90X900
+	bool "Nuvoton W90X900 CPU"
+	select CPU_ARM926T
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
+	select COMMON_CLKDEV
+	help
+		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+		can login www.mcuos.com or www.nuvoton.com to know more.
+
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
@@ -495,19 +520,16 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_MMP
-	bool "Marvell PXA168/910"
-	depends on MMU
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	select COMMON_CLKDEV
+config ARCH_MSM
+	bool "Qualcomm MSM"
+	select CPU_V6
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select TICK_ONESHOT
-	select PLAT_PXA
 	help
-	  Support for Marvell's PXA168/910 processor line.
+	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
+	  apps processor of the MSM7K and depends on a shared memory
+	  interface to the ARM9 modem processor which runs the baseband stack
+	  and controls some vital subsystems (clock and power control, etc).
 
 config ARCH_RPC
 	bool "RiscPC"
@@ -576,6 +598,20 @@ config ARCH_LH7A40X
 	  core with a wide array of integrated devices for
 	  hand-held and low-power applications.
 
+config ARCH_U300
+	bool "ST-Ericsson U300 Series"
+	depends on MMU
+	select CPU_ARM926T
+	select ARM_AMBA
+	select ARM_VIC
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_GPIO
+	help
+	  Support for ST-Ericsson U300 series mobile platforms.
+
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select CPU_ARM926T
@@ -587,6 +623,7 @@ config ARCH_DAVINCI
 	select ZONE_DMA
 	select HAVE_IDE
 	select COMMON_CLKDEV
+	select GENERIC_ALLOCATOR
 	help
 	  Support for TI's DaVinci platform.
 
@@ -600,24 +637,6 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
-config ARCH_MSM
-	bool "Qualcomm MSM"
-	select CPU_V6
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
-	  apps processor of the MSM7K and depends on a shared memory
-	  interface to the ARM9 modem processor which runs the baseband stack
-	  and controls some vital subsystems (clock and power control, etc).
-
-config ARCH_W90X900
-	bool "Nuvoton W90X900 CPU"
-	select CPU_ARM926T
-	help
-		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-		can login www.mcuos.com or www.nuvoton.com to know more.
-
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -681,9 +700,9 @@ source "arch/arm/mach-s3c6400/Kconfig"
 source "arch/arm/mach-s3c6410/Kconfig"
 endif
 
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/plat-stmp3xxx/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
 
@@ -707,6 +726,8 @@ source "arch/arm/mach-ks8695/Kconfig"
 
 source "arch/arm/mach-msm/Kconfig"
 
+source "arch/arm/mach-u300/Kconfig"
+
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
@@ -859,8 +880,11 @@ source "kernel/time/Kconfig"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -878,6 +902,18 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config HAVE_ARM_SCU
+	bool
+	depends on SMP
+	help
+	  This option enables support for the ARM system coherency unit
+
+config HAVE_ARM_TWD
+	bool
+	depends on SMP
+	help
+	  This options enables support for the ARM timer and watchdog unit
+
 choice
 	prompt "Memory split"
 	default VMSPLIT_3G
@@ -916,8 +952,10 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
-	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
+	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
 	default y
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -979,7 +1017,6 @@ config OABI_COMPAT
 
 config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
-	default n
 
 # Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE
@@ -1022,12 +1059,12 @@ source "mm/Kconfig"
 config LEDS
 	bool "Timer and CPU usage LEDs"
 	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
-		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+		   ARCH_EBSA285 || ARCH_INTEGRATOR || \
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
 		   ARCH_AT91 || ARCH_DAVINCI || \
-		   ARCH_KS8695 || MACH_RD88F5182
+		   ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
 	help
 	  If you say Y here, the LEDs on your machine will be used
 	  to provide useful information about your current system status.
@@ -1085,6 +1122,22 @@ config ALIGNMENT_TRAP
 	  correct operation of some network protocols. With an IP-only
 	  configuration it is safe to say N, otherwise say Y.
 
+config UACCESS_WITH_MEMCPY
+	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
+	depends on MMU && EXPERIMENTAL
+	default y if CPU_FEROCEON
+	help
+	  Implement faster copy_to_user and clear_user methods for CPU
+	  cores where a 8-word STM instruction give significantly higher
+	  memory write throughput than a sequence of individual 32bit stores.
+
+	  A possible side effect is a slight increase in scheduling latency
+	  between threads sharing the same address space if they invoke
+	  such copy operations with large buffers.
+
+	  However, if the CPU data cache is using a write-allocate mode,
+	  this option is unlikely to provide any performance gain.
+
 endmenu
 
 menu "Boot options"
@@ -1188,7 +1241,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1213,14 +1266,11 @@ config CPU_FREQ_INTEGRATOR
 
 	  If in doubt, say Y.
 
-config CPU_FREQ_IMX
-	tristate "CPUfreq driver for i.MX CPUs"
-	depends on ARCH_IMX && CPU_FREQ
-	default n
-	help
-	  This enables the CPUfreq driver for i.MX CPUs.
-
-	  If in doubt, say N.
+config CPU_FREQ_PXA
+	bool
+	depends on CPU_FREQ && ARCH_PXA && PXA25x
+	default y
+	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
 endif
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e84729bf13d..c877d6df23d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -11,6 +11,9 @@
 # Copyright (C) 1995-2001 by Russell King
 
 LDFLAGS_vmlinux	:=-p --no-undefined -X
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux	+= --be8
+endif
 CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
 OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 GZFLAGS		:=-9
@@ -99,64 +102,73 @@ CHECKFLAGS	+= -D__arm__
 #Default value
 head-y		:= arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
 textofs-y	:= 0x00008000
-
- machine-$(CONFIG_ARCH_RPC)	   := rpc
- machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
- machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
- machine-$(CONFIG_ARCH_SHARK)	   := shark
- machine-$(CONFIG_ARCH_SA1100)	   := sa1100
-ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
- textofs-$(CONFIG_SA1111)	   := 0x00208000
+ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_SA1111) := 0x00208000
 endif
- machine-$(CONFIG_ARCH_PXA)	   := pxa
- machine-$(CONFIG_ARCH_MMP)	   := mmp
-    plat-$(CONFIG_PLAT_PXA)	   := pxa
- machine-$(CONFIG_ARCH_L7200)	   := l7200
- machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
- machine-$(CONFIG_ARCH_GEMINI)     := gemini
- textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
- machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
- machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
- machine-$(CONFIG_ARCH_IOP33X)	   := iop33x
- machine-$(CONFIG_ARCH_IOP13XX)	   := iop13xx
-    plat-$(CONFIG_PLAT_IOP)	   := iop
- machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
- machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
- machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
- machine-$(CONFIG_ARCH_OMAP1)	   := omap1
- machine-$(CONFIG_ARCH_OMAP2)	   := omap2
- machine-$(CONFIG_ARCH_OMAP3)	   := omap2
-    plat-$(CONFIG_ARCH_OMAP)	   := omap
- machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- machine-$(CONFIG_ARCH_S3C24A0)	   := s3c24a0
-    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx s3c
- machine-$(CONFIG_ARCH_S3C64XX)	   := s3c6400 s3c6410
-    plat-$(CONFIG_PLAT_S3C64XX)	   := s3c64xx s3c
- machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
- machine-$(CONFIG_ARCH_VERSATILE)  := versatile
- machine-$(CONFIG_ARCH_IMX)	   := imx
- machine-$(CONFIG_ARCH_H720X)	   := h720x
- machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
- machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91)	   := at91
- machine-$(CONFIG_ARCH_EP93XX)	   := ep93xx
- machine-$(CONFIG_ARCH_PNX4008)	   := pnx4008
- machine-$(CONFIG_ARCH_NETX)	   := netx
- machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
- machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
- machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
- machine-$(CONFIG_ARCH_KS8695)     := ks8695
-    plat-$(CONFIG_ARCH_MXC)	   := mxc
- machine-$(CONFIG_ARCH_MX2)	   := mx2
- machine-$(CONFIG_ARCH_MX3)	   := mx3
- machine-$(CONFIG_ARCH_MX1)	   := mx1
- machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
-    plat-$(CONFIG_PLAT_ORION)	   := orion
- machine-$(CONFIG_ARCH_MSM)	   := msm
- machine-$(CONFIG_ARCH_LOKI)       := loki
- machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
- machine-$(CONFIG_ARCH_W90X900)    := w90x900
+
+# Machine directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
+machine-$(CONFIG_ARCH_AT91)		:= at91
+machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
+machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
+machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
+machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
+machine-$(CONFIG_ARCH_GEMINI)		:= gemini
+machine-$(CONFIG_ARCH_H720X)		:= h720x
+machine-$(CONFIG_ARCH_INTEGRATOR)	:= integrator
+machine-$(CONFIG_ARCH_IOP13XX)		:= iop13xx
+machine-$(CONFIG_ARCH_IOP32X)		:= iop32x
+machine-$(CONFIG_ARCH_IOP33X)		:= iop33x
+machine-$(CONFIG_ARCH_IXP2000)		:= ixp2000
+machine-$(CONFIG_ARCH_IXP23XX)		:= ixp23xx
+machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
+machine-$(CONFIG_ARCH_KS8695)		:= ks8695
+machine-$(CONFIG_ARCH_L7200)		:= l7200
+machine-$(CONFIG_ARCH_LH7A40X)		:= lh7a40x
+machine-$(CONFIG_ARCH_LOKI) 		:= loki
+machine-$(CONFIG_ARCH_MMP)		:= mmp
+machine-$(CONFIG_ARCH_MSM)		:= msm
+machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
+machine-$(CONFIG_ARCH_MX1)		:= mx1
+machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_NETX)		:= netx
+machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
+machine-$(CONFIG_ARCH_OMAP1)		:= omap1
+machine-$(CONFIG_ARCH_OMAP2)		:= omap2
+machine-$(CONFIG_ARCH_OMAP3)		:= omap2
+machine-$(CONFIG_ARCH_OMAP4)		:= omap2
+machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
+machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
+machine-$(CONFIG_ARCH_PXA)		:= pxa
+machine-$(CONFIG_ARCH_REALVIEW)		:= realview
+machine-$(CONFIG_ARCH_RPC)		:= rpc
+machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
+machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_SA1100)		:= sa1100
+machine-$(CONFIG_ARCH_SHARK)		:= shark
+machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
+machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
+machine-$(CONFIG_ARCH_U300)		:= u300
+machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
+machine-$(CONFIG_ARCH_W90X900)		:= w90x900
+machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+
+# Platform directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+plat-$(CONFIG_ARCH_MXC)		:= mxc
+plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_PLAT_IOP)		:= iop
+plat-$(CONFIG_PLAT_ORION)	:= orion
+plat-$(CONFIG_PLAT_PXA)		:= pxa
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
+plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index fbe5eef1f6c..ce39dc54008 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -40,7 +40,7 @@ ifeq ($(CONFIG_PXA_SHARPSL),y)
 OBJS		+= head-sharpsl.o
 endif
 
-ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+ifeq ($(CONFIG_CPU_ENDIAN_BE32),y)
 ifeq ($(CONFIG_CPU_CP15),y)
 OBJS		+= big-endian.o
 else
@@ -78,6 +78,9 @@ EXTRA_AFLAGS  := -Wa,-march=all
 # linker symbols.  We only define initrd_phys and params_phys if the
 # machine class defined the corresponding makefile variable.
 LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux += --be8
+endif
 ifneq ($(INITRD_PHYS),)
 LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
 endif
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b371fba1b95..01d49be3b2c 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -438,6 +438,9 @@ __armv4_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x0030
+#ifdef CONFIG_CPU_ENDIAN_BE8
+		orr	r0, r0, #1 << 25	@ big-endian page tables
+#endif
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
@@ -455,6 +458,9 @@ __armv7_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+#ifdef CONFIG_CPU_ENDIAN_BE8
+		orr	r0, r0, #1 << 25	@ big-endian page tables
+#endif
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #-1
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index a2cd9beaf37..4efbb9df044 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -4,6 +4,14 @@ config ARM_GIC
 config ARM_VIC
 	bool
 
+config ARM_VIC_NR
+	int
+	default 2
+	depends on ARM_VIC
+	help
+	  The maximum number of VICs available in the system, for
+	  power management.
+
 config ICST525
 	bool
 
@@ -27,10 +35,6 @@ config SHARP_LOCOMO
 config SHARP_PARAM
 	bool
 
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
-
 config SHARP_SCOOP
 	bool
 
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 7cb7961d81c..76be7ff2a7c 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_TIMER_ACORN)	+= time-acorn.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
-obj-$(CONFIG_SHARPSL_PM)	+= sharpsl_pm.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_ARCH_IXP2000)	+= uengine.o
 obj-$(CONFIG_ARCH_IXP23XX)	+= uengine.o
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 5589444ff43..f37afd9422f 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -135,6 +135,24 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
 }
 EXPORT_SYMBOL(clkdev_alloc);
 
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+	struct device *dev)
+{
+	struct clk *r = clk_get(dev, id);
+	struct clk_lookup *l;
+
+	if (IS_ERR(r))
+		return PTR_ERR(r);
+
+	l = clkdev_alloc(r, alias, alias_dev_name);
+	clk_put(r);
+	if (!l)
+		return -ENODEV;
+	clkdev_add(l);
+	return 0;
+}
+EXPORT_SYMBOL(clk_add_alias);
+
 /*
  * clkdev_drop - remove a clock dynamically allocated
  */
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
deleted file mode 100644
index 140f1d721d5..00000000000
--- a/arch/arm/common/sharpsl_pm.c
+++ /dev/null
@@ -1,859 +0,0 @@
-/*
- * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
- * series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on code written by Sharp for 2.4 kernels
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/apm_bios.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/apm-emulation.h>
-#include <linux/suspend.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/pm.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/regs-rtc.h>
-#include <mach/sharpsl.h>
-#include <asm/hardware/sharpsl_pm.h>
-
-/*
- * Constants
- */
-#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
-#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
-#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
-#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
-
-#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
-#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
-#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
-#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
-#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
-
-/*
- * Prototypes
- */
-#ifdef CONFIG_PM
-static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery_voltage(void);
-static int sharpsl_fatal_check(void);
-#endif
-static int sharpsl_check_battery_temp(void);
-static int sharpsl_ac_check(void);
-static int sharpsl_average_value(int ad);
-static void sharpsl_average_clear(void);
-static void sharpsl_charge_toggle(struct work_struct *private_);
-static void sharpsl_battery_thread(struct work_struct *private_);
-
-
-/*
- * Variables
- */
-struct sharpsl_pm_status sharpsl_pm;
-DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
-DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
-DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
-
-
-static int get_percentage(int voltage)
-{
-	int i = sharpsl_pm.machinfo->bat_levels - 1;
-	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
-	struct battery_thresh *thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
-	else
-		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
-
-	while (i > 0 && (voltage > thresh[i].voltage))
-		i--;
-
-	return thresh[i].percentage;
-}
-
-static int get_apm_status(int voltage)
-{
-	int low_thresh, high_thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON) {
-		high_thresh = sharpsl_pm.machinfo->status_high_acin;
-		low_thresh = sharpsl_pm.machinfo->status_low_acin;
-	} else {
-		high_thresh = sharpsl_pm.machinfo->status_high_noac;
-		low_thresh = sharpsl_pm.machinfo->status_low_noac;
-	}
-
-	if (voltage >= high_thresh)
-		return APM_BATTERY_STATUS_HIGH;
-	if (voltage >= low_thresh)
-		return APM_BATTERY_STATUS_LOW;
-	return APM_BATTERY_STATUS_CRITICAL;
-}
-
-void sharpsl_battery_kick(void)
-{
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
-}
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
-
-static void sharpsl_battery_thread(struct work_struct *private_)
-{
-	int voltage, percent, apm_status, i = 0;
-
-	if (!sharpsl_pm.machinfo)
-		return;
-
-	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
-
-	/* Corgi cannot confirm when battery fully charged so periodically kick! */
-	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
-			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
-		schedule_delayed_work(&toggle_charger, 0);
-
-	while(1) {
-		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-
-		if (voltage > 0) break;
-		if (i++ > 5) {
-			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
-			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
-			break;
-		}
-	}
-
-	voltage = sharpsl_average_value(voltage);
-	apm_status = get_apm_status(voltage);
-	percent = get_percentage(voltage);
-
-	/* At low battery voltages, the voltage has a tendency to start
-           creeping back up so we try to avoid this here */
-	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
-		sharpsl_pm.battstat.mainbat_voltage = voltage;
-		sharpsl_pm.battstat.mainbat_status = apm_status;
-		sharpsl_pm.battstat.mainbat_percent = percent;
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
-			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
-
-#ifdef CONFIG_BACKLIGHT_CORGI
-	/* If battery is low. limit backlight intensity to save power. */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
-			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
-		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
-			sharpsl_pm.machinfo->backlight_limit(1);
-			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
-		}
-	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
-		sharpsl_pm.machinfo->backlight_limit(0);
-		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
-	}
-#endif
-
-	/* Suspend if critical battery level */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
-			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		dev_err(sharpsl_pm.dev, "Fatal Off\n");
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
-}
-
-void sharpsl_pm_led(int val)
-{
-	if (val == SHARPSL_LED_ERROR) {
-		dev_err(sharpsl_pm.dev, "Charging Error!\n");
-	} else if (val == SHARPSL_LED_ON) {
-		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
-		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
-		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
-	}
-}
-
-static void sharpsl_charge_on(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
-
-	sharpsl_pm.full_count = 0;
-	sharpsl_pm.charge_mode = CHRG_ON;
-	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
-}
-
-static void sharpsl_charge_off(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
-
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm_led(SHARPSL_LED_OFF);
-	sharpsl_pm.charge_mode = CHRG_OFF;
-
-	schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-static void sharpsl_charge_error(void)
-{
-	sharpsl_pm_led(SHARPSL_LED_ERROR);
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-}
-
-static void sharpsl_charge_toggle(struct work_struct *private_)
-{
-	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-		sharpsl_charge_off();
-		return;
-	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
-		sharpsl_charge_error();
-		return;
-	}
-
-	sharpsl_pm_led(SHARPSL_LED_ON);
-	sharpsl_pm.machinfo->charge(0);
-	mdelay(SHARPSL_CHARGE_WAIT_TIME);
-	sharpsl_pm.machinfo->charge(1);
-
-	sharpsl_pm.charge_start_time = jiffies;
-}
-
-static void sharpsl_ac_timer(unsigned long data)
-{
-	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
-
-	sharpsl_average_clear();
-	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
-		sharpsl_charge_on();
-	else if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_charge_off();
-
-	schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
-{
-	/* Delay the event slightly to debounce */
-	/* Must be a smaller delay than the chrg_full_isr below */
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return IRQ_HANDLED;
-}
-
-static void sharpsl_chrg_full_timer(unsigned long data)
-{
-	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
-
-	sharpsl_pm.full_count++;
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
-		if (sharpsl_pm.charge_mode == CHRG_ON)
-			sharpsl_charge_off();
-	} else if (sharpsl_pm.full_count < 2) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
-		schedule_delayed_work(&toggle_charger, 0);
-	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
-		schedule_delayed_work(&toggle_charger, 0);
-	} else {
-		sharpsl_charge_off();
-		sharpsl_pm.charge_mode = CHRG_DONE;
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
-	}
-}
-
-/* Charging Finished Interrupt (Not present on Corgi) */
-/* Can trigger at the same time as an AC status change so
-   delay until after that has been processed */
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
-{
-	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
-		return IRQ_HANDLED;
-
-	/* delay until after any ac interrupt */
-	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
-
-	return IRQ_HANDLED;
-}
-
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
-{
-	int is_fatal = 0;
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
-		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
-		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Maintain an average of the last 10 readings
- */
-#define SHARPSL_CNV_VALUE_NUM    10
-static int sharpsl_ad_index;
-
-static void sharpsl_average_clear(void)
-{
-	sharpsl_ad_index = 0;
-}
-
-static int sharpsl_average_value(int ad)
-{
-	int i, ad_val = 0;
-	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
-
-	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
-		sharpsl_ad_index = 0;
-		return ad;
-	}
-
-	sharpsl_ad[sharpsl_ad_index] = ad;
-	sharpsl_ad_index++;
-	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
-		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
-			sharpsl_ad[i] = sharpsl_ad[i+1];
-		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
-	}
-	for (i=0; i < sharpsl_ad_index; i++)
-		ad_val += sharpsl_ad[i];
-
-	return (ad_val / sharpsl_ad_index);
-}
-
-/*
- * Take an array of 5 integers, remove the maximum and minimum values
- * and return the average.
- */
-static int get_select_val(int *val)
-{
-	int i, j, k, temp, sum = 0;
-
-	/* Find MAX val */
-	temp = val[0];
-	j=0;
-	for (i=1; i<5; i++) {
-		if (temp < val[i]) {
-			temp = val[i];
-			j = i;
-		}
-	}
-
-	/* Find MIN val */
-	temp = val[4];
-	k=4;
-	for (i=3; i>=0; i--) {
-		if (temp > val[i]) {
-			temp = val[i];
-			k = i;
-		}
-	}
-
-	for (i=0; i<5; i++)
-		if (i != j && i != k )
-			sum += val[i];
-
-	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
-
-	return (sum/3);
-}
-
-static int sharpsl_check_battery_temp(void)
-{
-	int val, i, buff[5];
-
-	/* Check battery temperature */
-	for (i=0; i<5; i++) {
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		sharpsl_pm.machinfo->measure_temp(1);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
-		sharpsl_pm.machinfo->measure_temp(0);
-	}
-
-	val = get_select_val(buff);
-
-	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
-	if (val > sharpsl_pm.machinfo->charge_on_temp) {
-		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_check_battery_voltage(void)
-{
-	int val, i, buff[5];
-
-	/* disable charge, enable discharge */
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm.machinfo->discharge(1);
-	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery voltage */
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	sharpsl_pm.machinfo->discharge(0);
-
-	val = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
-
-	if (val < sharpsl_pm.machinfo->charge_on_volt)
-		return -1;
-
-	return 0;
-}
-#endif
-
-static int sharpsl_ac_check(void)
-{
-	int temp, i, buff[5];
-
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
-
-	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
-		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
-	flush_scheduled_work();
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-	else
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-
-	return 0;
-}
-
-static int sharpsl_pm_resume(struct platform_device *pdev)
-{
-	/* Clear the reset source indicators as they break the bootloader upon reboot */
-	RCSR = 0x0f;
-	sharpsl_average_clear();
-	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
-	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
-
-	return 0;
-}
-
-static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
-	/* not charging and AC-IN! */
-
-	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
-		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
-		sharpsl_pm.charge_mode = CHRG_OFF;
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-		sharpsl_off_charge_battery();
-	}
-
-	sharpsl_pm.machinfo->presuspend();
-
-	PEDR = 0xffffffff; /* clear it */
-
-	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
-	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
-		RTSR &= RTSR_ALE;
-		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
-		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
-		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
-	} else if (alarm_enable) {
-		RTSR &= RTSR_ALE;
-		RTAR = alarm_time;
-		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
-	}
-
-	pxa_pm_enter(state);
-
-	sharpsl_pm.machinfo->postsuspend();
-
-	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
-}
-
-static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
-	{
-		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
-			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		if(sharpsl_off_charge_battery()) {
-			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
-	}
-
-	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
-	{
-		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
-		corgi_goto_sleep(alarm_time, alarm_enable, state);
-		return 1;
-	}
-
-	return 0;
-}
-
-static int corgi_pxa_pm_enter(suspend_state_t state)
-{
-	unsigned long alarm_time = RTAR;
-	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
-
-	corgi_goto_sleep(alarm_time, alarm_status, state);
-
-	while (corgi_enter_suspend(alarm_time,alarm_status,state))
-		{}
-
-	if (sharpsl_pm.machinfo->earlyresume)
-		sharpsl_pm.machinfo->earlyresume();
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
-
-	return 0;
-}
-
-/*
- * Check for fatal battery errors
- * Fatal returns -1
- */
-static int sharpsl_fatal_check(void)
-{
-	int buff[5], temp, i, acin;
-
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
-
-	/* Check AC-Adapter */
-	acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		sharpsl_pm.machinfo->charge(0);
-		udelay(100);
-		sharpsl_pm.machinfo->discharge(1);	/* enable discharge */
-		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery : check inserting battery ? */
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		udelay(100);
-		sharpsl_pm.machinfo->charge(1);
-		sharpsl_pm.machinfo->discharge(0);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
-
-	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
-			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
-		return -1;
-	return 0;
-}
-
-static int sharpsl_off_charge_error(void)
-{
-	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm_led(SHARPSL_LED_ERROR);
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-	return 1;
-}
-
-/*
- * Charging Control while suspended
- * Return 1 - go straight to sleep
- * Return 0 - sleep or wakeup depending on other factors
- */
-static int sharpsl_off_charge_battery(void)
-{
-	int time;
-
-	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
-
-	if (sharpsl_pm.charge_mode == CHRG_OFF) {
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
-
-		/* AC Check */
-		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
-			return sharpsl_off_charge_error();
-
-		/* Start Charging */
-		sharpsl_pm_led(SHARPSL_LED_ON);
-		sharpsl_pm.machinfo->charge(0);
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		sharpsl_pm.machinfo->charge(1);
-
-		sharpsl_pm.charge_mode = CHRG_ON;
-		sharpsl_pm.full_count = 0;
-
-		return 1;
-	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
-		return 1;
-	}
-
-	if (sharpsl_pm.full_count == 0) {
-		int time;
-
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
-
-		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
-			return sharpsl_off_charge_error();
-
-		sharpsl_pm.machinfo->charge(0);
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		sharpsl_pm.machinfo->charge(1);
-		sharpsl_pm.charge_mode = CHRG_ON;
-
-		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-		time = RCNR;
-		while(1) {
-			/* Check if any wakeup event had occurred */
-			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
-				return 0;
-			/* Check for timeout */
-			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
-				return 1;
-			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
-	   			sharpsl_pm.full_count++;
-				sharpsl_pm.machinfo->charge(0);
-				mdelay(SHARPSL_CHARGE_WAIT_TIME);
-				sharpsl_pm.machinfo->charge(1);
-				return 1;
-			}
-		}
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
-
-	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-	time = RCNR;
-	while(1) {
-		/* Check if any wakeup event had occurred */
-		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
-			return 0;
-		/* Check for timeout */
-		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
-			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
-				sharpsl_pm.full_count = 0;
-			}
-			sharpsl_pm.full_count++;
-			return 1;
-		}
-		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_DONE;
-			return 1;
-		}
-	}
-}
-#else
-#define sharpsl_pm_suspend	NULL
-#define sharpsl_pm_resume	NULL
-#endif
-
-static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
-}
-
-static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
-}
-
-static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
-static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
-
-extern void (*apm_get_power_status)(struct apm_power_info *);
-
-static void sharpsl_apm_get_power_status(struct apm_power_info *info)
-{
-	info->ac_line_status = sharpsl_pm.battstat.ac_status;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		info->battery_status = APM_BATTERY_STATUS_CHARGING;
-	else
-		info->battery_status = sharpsl_pm.battstat.mainbat_status;
-
-	info->battery_flag = (1 << info->battery_status);
-	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
-}
-
-#ifdef CONFIG_PM
-static struct platform_suspend_ops sharpsl_pm_ops = {
-	.enter		= corgi_pxa_pm_enter,
-	.valid		= suspend_valid_only_mem,
-};
-#endif
-
-static int __init sharpsl_pm_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	sharpsl_pm.dev = &pdev->dev;
-	sharpsl_pm.machinfo = pdev->dev.platform_data;
-	sharpsl_pm.charge_mode = CHRG_OFF;
-	sharpsl_pm.flags = 0;
-
-	init_timer(&sharpsl_pm.ac_timer);
-	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
-
-	init_timer(&sharpsl_pm.chrg_full_timer);
-	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
-
-	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
-
-	sharpsl_pm.machinfo->init();
-
-	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
-	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
-	if (ret != 0)
-		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
-
-	apm_get_power_status = sharpsl_apm_get_power_status;
-
-#ifdef CONFIG_PM
-	suspend_set_ops(&sharpsl_pm_ops);
-#endif
-
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return 0;
-}
-
-static int sharpsl_pm_remove(struct platform_device *pdev)
-{
-	suspend_set_ops(NULL);
-
-	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
-	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
-
-	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
-
-	sharpsl_pm.machinfo->exit();
-
-	del_timer_sync(&sharpsl_pm.chrg_full_timer);
-	del_timer_sync(&sharpsl_pm.ac_timer);
-
-	return 0;
-}
-
-static struct platform_driver sharpsl_pm_driver = {
-	.probe		= sharpsl_pm_probe,
-	.remove		= sharpsl_pm_remove,
-	.suspend	= sharpsl_pm_suspend,
-	.resume		= sharpsl_pm_resume,
-	.driver		= {
-		.name		= "sharpsl-pm",
-	},
-};
-
-static int __devinit sharpsl_pm_init(void)
-{
-	return platform_driver_register(&sharpsl_pm_driver);
-}
-
-static void sharpsl_pm_exit(void)
-{
- 	platform_driver_unregister(&sharpsl_pm_driver);
-}
-
-late_initcall(sharpsl_pm_init);
-module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index b2a781d9ce0..887c6eb3a18 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
@@ -39,11 +40,219 @@ static void vic_unmask_irq(unsigned int irq)
 	writel(1 << irq, base + VIC_INT_ENABLE);
 }
 
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+		writel(VIC_VECT_CNTL_ENABLE | i, reg);
+	}
+
+	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
+/**
+ * struct vic_device - VIC PM device
+ * @sysdev: The system device which is registered.
+ * @irq: The IRQ number for the base of the VIC.
+ * @base: The register base for the VIC.
+ * @resume_sources: A bitmask of interrupts for resume.
+ * @resume_irqs: The IRQs enabled for resume.
+ * @int_select: Save for VIC_INT_SELECT.
+ * @int_enable: Save for VIC_INT_ENABLE.
+ * @soft_int: Save for VIC_INT_SOFT.
+ * @protect: Save for VIC_PROTECT.
+ */
+struct vic_device {
+	struct sys_device sysdev;
+
+	void __iomem	*base;
+	int		irq;
+	u32		resume_sources;
+	u32		resume_irqs;
+	u32		int_select;
+	u32		int_enable;
+	u32		soft_int;
+	u32		protect;
+};
+
+/* we cannot allocate memory when VICs are initially registered */
+static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+
+static inline struct vic_device *to_vic(struct sys_device *sys)
+{
+	return container_of(sys, struct vic_device, sysdev);
+}
+
+static int vic_id;
+
+static int vic_class_resume(struct sys_device *dev)
+{
+	struct vic_device *vic = to_vic(dev);
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
+
+	/* re-initialise static settings */
+	vic_init2(base);
+
+	writel(vic->int_select, base + VIC_INT_SELECT);
+	writel(vic->protect, base + VIC_PROTECT);
+
+	/* set the enabled ints and then clear the non-enabled */
+	writel(vic->int_enable, base + VIC_INT_ENABLE);
+	writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
+
+	/* and the same for the soft-int register */
+
+	writel(vic->soft_int, base + VIC_INT_SOFT);
+	writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
+
+	return 0;
+}
+
+static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct vic_device *vic = to_vic(dev);
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
+
+	vic->int_select = readl(base + VIC_INT_SELECT);
+	vic->int_enable = readl(base + VIC_INT_ENABLE);
+	vic->soft_int = readl(base + VIC_INT_SOFT);
+	vic->protect = readl(base + VIC_PROTECT);
+
+	/* set the interrupts (if any) that are used for
+	 * resuming the system */
+
+	writel(vic->resume_irqs, base + VIC_INT_ENABLE);
+	writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+
+	return 0;
+}
+
+struct sysdev_class vic_class = {
+	.name		= "vic",
+	.suspend	= vic_class_suspend,
+	.resume		= vic_class_resume,
+};
+
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+	struct vic_device *v;
+
+	if (vic_id >= ARRAY_SIZE(vic_devices))
+		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+	else {
+		v = &vic_devices[vic_id];
+		v->base = base;
+		v->resume_sources = resume_sources;
+		v->irq = irq;
+		vic_id++;
+	}
+}
+
+/**
+ * vic_pm_init - initicall to register VIC pm
+ *
+ * This is called via late_initcall() to register
+ * the resources for the VICs due to the early
+ * nature of the VIC's registration.
+*/
+static int __init vic_pm_init(void)
+{
+	struct vic_device *dev = vic_devices;
+	int err;
+	int id;
+
+	if (vic_id == 0)
+		return 0;
+
+	err = sysdev_class_register(&vic_class);
+	if (err) {
+		printk(KERN_ERR "%s: cannot register class\n", __func__);
+		return err;
+	}
+
+	for (id = 0; id < vic_id; id++, dev++) {
+		dev->sysdev.id = id;
+		dev->sysdev.cls = &vic_class;
+
+		err = sysdev_register(&dev->sysdev);
+		if (err) {
+			printk(KERN_ERR "%s: failed to register device\n",
+			       __func__);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+late_initcall(vic_pm_init);
+
+static struct vic_device *vic_from_irq(unsigned int irq)
+{
+        struct vic_device *v = vic_devices;
+	unsigned int base_irq = irq & ~31;
+	int id;
+
+	for (id = 0; id < vic_id; id++, v++) {
+		if (v->irq == base_irq)
+			return v;
+	}
+
+	return NULL;
+}
+
+static int vic_set_wake(unsigned int irq, unsigned int on)
+{
+	struct vic_device *v = vic_from_irq(irq);
+	unsigned int off = irq & 31;
+
+	if (!v)
+		return -EINVAL;
+
+	if (on)
+		v->resume_irqs |= 1 << off;
+	else
+		v->resume_irqs &= ~(1 << off);
+
+	return 0;
+}
+
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+
+#define vic_set_wake NULL
+#endif /* CONFIG_PM */
+
 static struct irq_chip vic_chip = {
 	.name	= "VIC",
 	.ack	= vic_mask_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
+	.set_wake = vic_set_wake,
 };
 
 /**
@@ -51,9 +260,10 @@ static struct irq_chip vic_chip = {
  * @base: iomem base address
  * @irq_start: starting interrupt number, must be muliple of 32
  * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
  */
 void __init vic_init(void __iomem *base, unsigned int irq_start,
-		     u32 vic_sources)
+		     u32 vic_sources, u32 resume_sources)
 {
 	unsigned int i;
 
@@ -77,12 +287,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		writel(value, base + VIC_PL190_VECT_ADDR);
 	}
 
-	for (i = 0; i < 16; i++) {
-		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
-		writel(VIC_VECT_CNTL_ENABLE | i, reg);
-	}
-
-	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	vic_init2(base);
 
 	for (i = 0; i < 32; i++) {
 		if (vic_sources & (1 << i)) {
@@ -94,4 +299,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
 	}
+
+	vic_pm_register(base, irq_start, resume_sources);
 }
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index 227da0843ea..d18d21bb41e 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc3
-# Tue Aug 19 11:26:54 2008
+# Linux kernel version: 2.6.30-rc8
+# Thu Jun  4 09:53:21 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -44,15 +42,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -61,31 +68,37 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -93,19 +106,13 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -113,11 +120,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -133,7 +137,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -143,10 +147,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -167,14 +171,17 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
@@ -187,16 +194,24 @@ CONFIG_CPU_PXA300=y
 # CONFIG_CPU_PXA310 is not set
 # CONFIG_CPU_PXA320 is not set
 # CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
 # CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
 # CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
 # CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
 # CONFIG_MACH_ZYLONITE is not set
 # CONFIG_MACH_LITTLETON is not set
 # CONFIG_MACH_TAVOREVB is not set
@@ -204,19 +219,15 @@ CONFIG_CPU_PXA300=y
 # CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_CM_X300=y
 # CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
 # CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
 # CONFIG_PXA_EZX is not set
 CONFIG_PXA3xx=y
 # CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PLAT_PXA=y
 
 #
 # Processor Type
@@ -241,6 +252,7 @@ CONFIG_IO_36=y
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_XSC3L2=y
 CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -256,25 +268,33 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -287,7 +307,7 @@ CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
@@ -304,6 +324,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -320,6 +341,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -376,6 +399,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -385,7 +409,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -407,8 +433,7 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
@@ -416,19 +441,15 @@ CONFIG_BT_HCIUSB_SCO=y
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -453,6 +474,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
@@ -494,7 +516,6 @@ CONFIG_MTD_CFI_I2=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -516,16 +537,23 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -585,11 +613,15 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -604,11 +636,17 @@ CONFIG_MII=y
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=0
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -624,10 +662,13 @@ CONFIG_LIBERTAS_SDIO=m
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -677,18 +718,21 @@ CONFIG_KEYBOARD_PXA27x=m
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -721,10 +765,10 @@ CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -763,12 +807,8 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -782,6 +822,10 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -798,12 +842,14 @@ CONFIG_GPIO_PCA953X=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -811,12 +857,19 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -842,6 +895,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -862,12 +916,15 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
 # CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
 # CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -899,9 +956,11 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
@@ -916,12 +975,15 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=m
 # CONFIG_SND_PXA2XX_AC97 is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -932,9 +994,39 @@ CONFIG_HID_DEBUG=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -952,11 +1044,14 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -965,6 +1060,7 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 # CONFIG_USB_MUSB_HDRC is not set
 
 #
@@ -973,20 +1069,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -994,7 +1090,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1015,6 +1110,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1022,7 +1118,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1031,13 +1126,20 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1045,10 +1147,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1057,7 +1161,10 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1065,7 +1172,13 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1096,6 +1209,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1105,28 +1219,27 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_V3020=y
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1135,15 +1248,18 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1153,6 +1269,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1173,15 +1294,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1201,6 +1320,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1209,6 +1329,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1313,6 +1434,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1329,6 +1451,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
@@ -1336,22 +1459,38 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1363,17 +1502,28 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1442,15 +1592,21 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1460,7 +1616,10 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index eb2738b5be5..ac18662f38c 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 15 08:16:53 2009
+# Linux kernel version: 2.6.30-rc7
+# Tue May 26 07:24:28 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -179,6 +179,7 @@ CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_W90X900 is not set
+CONFIG_AINTC=y
 
 #
 # TI DaVinci Implementations
@@ -188,11 +189,17 @@ CONFIG_ARCH_DAVINCI=y
 # DaVinci Core Type
 #
 CONFIG_ARCH_DAVINCI_DM644x=y
+CONFIG_ARCH_DAVINCI_DM355=y
+CONFIG_ARCH_DAVINCI_DM646x=y
 
 #
 # DaVinci Board Type
 #
 CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_DAVINCI_DM355_EVM=y
+CONFIG_MACH_DM355_LEOPARD=y
+CONFIG_MACH_DAVINCI_DM6467_EVM=y
 CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -245,7 +252,7 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -661,7 +668,10 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_TI_DAVINCI_EMAC=y
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
@@ -963,6 +973,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_DM355EVM_MSP is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TPS65010 is not set
@@ -1317,6 +1328,7 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_DAVINCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
@@ -1778,6 +1790,7 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 3f89d5f25bc..3fb083b81b0 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,12 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:24 2006
+# Linux kernel version: 2.6.30-rc3
+# Tue May 19 12:26:49 2009
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -15,42 +22,54 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -58,31 +77,38 @@ CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -96,6 +122,7 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -105,29 +132,40 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_EP93XX=y
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 
 #
@@ -138,14 +176,24 @@ CONFIG_CRUNCH=y
 #
 # EP93xx Platforms
 #
+# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
+CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
 CONFIG_MACH_ADSSPHERE=y
+CONFIG_MACH_EDB93XX=y
+CONFIG_MACH_EDB9301=y
 CONFIG_MACH_EDB9302=y
-CONFIG_MACH_EDB9302A=y
+CONFIG_MACH_EDB9307=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
-CONFIG_MACH_EDB9315A=y
 CONFIG_MACH_GESBC9312=y
+CONFIG_MACH_MICRO9=y
+CONFIG_MACH_MICRO9H=y
+CONFIG_MACH_MICRO9M=y
+CONFIG_MACH_MICRO9L=y
 CONFIG_MACH_TS72XX=y
+CONFIG_EP93XX_EARLY_UART1=y
+# CONFIG_EP93XX_EARLY_UART2 is not set
+# CONFIG_EP93XX_EARLY_UART3 is not set
 
 #
 # Processor Type
@@ -154,6 +202,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
@@ -168,34 +217,47 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
 CONFIG_ARM_VIC=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
 #
 CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -205,6 +267,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -221,32 +289,31 @@ CONFIG_FPE_NWFPE_XP=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -267,6 +334,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -276,6 +344,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
@@ -289,25 +358,15 @@ CONFIG_IPV6=y
 # CONFIG_IPV6_SIT is not set
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -317,20 +376,28 @@ CONFIG_IPV6=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -339,41 +406,39 @@ CONFIG_IPV6=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -404,16 +469,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -431,49 +493,58 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_TS7250=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_TS7250 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
+# LPDDR flash memory drivers
 #
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Block devices
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
@@ -495,6 +566,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -502,92 +574,71 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_EP93XX_ETH=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_NET_RADIO is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -605,6 +656,7 @@ CONFIG_EP93XX_ETH=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -621,104 +673,101 @@ CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_EP93XX_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# TPM devices
+# I2C Hardware Bus support
 #
-# CONFIG_TCG_TPM is not set
 
 #
-# I2C support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
 
 #
-# I2C Algorithms
+# External I2C/SMBus adapter drivers
 #
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
-# I2C Hardware Bus support
+# Other I2C/SMBus bus drivers
 #
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# I2C GPIO expanders:
 #
-# CONFIG_W1 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 
 #
-# Hardware Monitoring support
+# PCI GPIO expanders:
 #
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -732,158 +781,188 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# Misc devices
+# Watchdog Device Drivers
 #
-# CONFIG_TIFM_CORE is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
 
 #
-# LED devices
+# USB-based Watchdog Cards
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# LED drivers
+# Sonics Silicon Backplane
 #
+# CONFIG_SSB is not set
 
 #
-# LED Triggers
+# Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-CONFIG_USB_RTL8150=y
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
@@ -895,6 +974,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -902,16 +982,23 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -920,38 +1007,34 @@ CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
-# MMC/SD Card support
+# OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -965,24 +1048,55 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# RTC drivers
+# I2C RTC drivers
 #
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
 CONFIG_RTC_DRV_EP93XX=y
+# CONFIG_RTC_DRV_PL030 is not set
 # CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -991,27 +1105,31 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1032,16 +1150,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1049,33 +1164,35 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -1087,7 +1204,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1109,10 +1225,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1153,49 +1266,83 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1204,21 +1351,115 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index dcf8153a947..0a1abb978d7 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -182,6 +182,7 @@ CONFIG_ARCH_KIRKWOOD=y
 CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
+CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
 CONFIG_PLAT_ORION=y
@@ -270,7 +271,9 @@ CONFIG_CMDLINE=""
 #
 # CPU Power Management
 #
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index f56837f69ca..957fd5fa27c 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -190,6 +190,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
 # CONFIG_MACH_CM_X300 is not set
+CONFIG_MACH_H4700=y
 CONFIG_MACH_MAGICIAN=y
 # CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
@@ -828,7 +829,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
+CONFIG_MFD_ASIC3=y
 CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
 # CONFIG_TPS65010 is not set
@@ -891,7 +892,7 @@ CONFIG_FB_PXA_OVERLAY=y
 # CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
+CONFIG_FB_W100=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
new file mode 100644
index 00000000000..4b04290d8e8
--- /dev/null
+++ b/arch/arm/configs/mx21_defconfig
@@ -0,0 +1,1170 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Tue Apr 14 16:58:09 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+CONFIG_MACH_MX21=y
+# CONFIG_MACH_MX27 is not set
+
+#
+# MX2 platforms:
+#
+CONFIG_MACH_MX21ADS=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_PWM=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_IMX=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_VFAT_FS is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
new file mode 100644
index 00000000000..28be17fbc15
--- /dev/null
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -0,0 +1,1528 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc5
+# Mon May 18 14:01:52 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+CONFIG_MACH_OMAP3EVM=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMC911X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
new file mode 100644
index 00000000000..23e43ea4efa
--- /dev/null
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -0,0 +1,866 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc7
+# Tue Jun  9 12:36:23 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+CONFIG_ARCH_OMAP4=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_4430SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_DISABLE=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+CONFIG_HAVE_MLOCK=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
new file mode 100644
index 00000000000..213fe9c5eaa
--- /dev/null
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -0,0 +1,1211 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Fri Oct 10 11:49:41 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+CONFIG_MACH_OMAP_ZOOM2=y
+# CONFIG_MACH_OVERO is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 5b98f764511..9e2385293ec 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -903,7 +903,8 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_TIMERIOMEM=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 593102da8cd..eb2cb31825c 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
new file mode 100644
index 00000000000..44461f197a1
--- /dev/null
+++ b/arch/arm/configs/stmp378x_defconfig
@@ -0,0 +1,1141 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Thu Apr 23 02:44:13 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-default"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_STMP3XXX=y
+
+#
+# Freescale STMP3xxx implementations
+#
+# CONFIG_ARCH_STMP37XX is not set
+CONFIG_ARCH_STMP378X=y
+# CONFIG_MACH_STMP37XX is not set
+CONFIG_MACH_STMP378X=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=6144
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_V4L1_COMPAT is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# RDS decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEBUG_OBJECTS_SELFTEST=y
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SLAB_LEAK=y
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+CONFIG_DEBUG_KOBJECT=y
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_EVENT_TRACER is not set
+CONFIG_BOOT_TRACER=y
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_STACK_TRACER=y
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig
new file mode 100644
index 00000000000..401279d531d
--- /dev/null
+++ b/arch/arm/configs/stmp37xx_defconfig
@@ -0,0 +1,1002 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29.1
+# Mon Apr 20 04:41:26 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-default"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_STMP3XXX=y
+
+#
+# Freescale STMP3xxx implementations
+#
+CONFIG_ARCH_STMP37XX=y
+# CONFIG_ARCH_STMP378X is not set
+CONFIG_MACH_STMP37XX=y
+# CONFIG_MACH_STMP378X is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=6144
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_STMP_DBG is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_V4L1_COMPAT is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_BOOT_TRACER=y
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_STACK_TRACER=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
new file mode 100644
index 00000000000..2d827e12114
--- /dev/null
+++ b/arch/arm/configs/u300_defconfig
@@ -0,0 +1,1115 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Mon Jun  1 09:18:22 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_U300=y
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# ST-Ericsson AB U300/U330/U335/U365 Platform
+#
+
+#
+# ST-Ericsson Mobile Platform Products
+#
+CONFIG_MACH_U300=y
+
+#
+# ST-Ericsson U300/U330/U335/U365 Feature Selections
+#
+# CONFIG_MACH_U300_BS2X is not set
+# CONFIG_MACH_U300_BS330 is not set
+CONFIG_MACH_U300_BS335=y
+# CONFIG_MACH_U300_BS365 is not set
+# CONFIG_MACH_U300_SINGLE_RAM is not set
+CONFIG_MACH_U300_DUAL_RAM=y
+CONFIG_U300_DEBUG=y
+# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+
+#
+# All the settings below must match the bootloader's settings
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_VIC=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_ARMMMCI=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/w90p910_defconfig
index 56bda7c6d67..5245655a0ad 100644
--- a/arch/arm/configs/w90p910_defconfig
+++ b/arch/arm/configs/w90p910_defconfig
@@ -1,11 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8-git8
-# Sat Nov 15 10:05:00 2008
+# Linux kernel version: 2.6.30
+# Wed Jun 10 22:09:25 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -42,10 +40,19 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
@@ -56,52 +63,53 @@ CONFIG_USER_NS=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_LSF=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -127,10 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -151,23 +159,17 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_W90X900=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
 CONFIG_CPU_W90P910=y
 
 #
@@ -198,6 +200,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
 # CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -209,27 +212,32 @@ CONFIG_ARM_THUMB=y
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -237,12 +245,17 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 initrd=0xa00000,4000000 mem=64M"
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
 CONFIG_ATAGS_PROC=y
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
@@ -258,6 +271,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -282,11 +297,93 @@ CONFIG_FW_LOADER=y
 CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
@@ -300,9 +397,41 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 
@@ -354,38 +483,57 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_W90X900=y
-# CONFIG_SERIAL_W90X900_PORT1 is not set
-# CONFIG_SERIAL_W90X900_PORT2 is not set
-# CONFIG_SERIAL_W90X900_PORT3 is not set
-# CONFIG_SERIAL_W90X900_PORT4 is not set
-CONFIG_SERIAL_W90X900_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -393,10 +541,11 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
 
 #
 # Multimedia devices
@@ -433,33 +582,131 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -469,6 +716,11 @@ CONFIG_FS_POSIX_ACL=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -486,15 +738,13 @@ CONFIG_GENERIC_ACL=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -502,15 +752,22 @@ CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -586,18 +843,36 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -605,14 +880,15 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -620,7 +896,10 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index bb7d695f390..1a711ea8418 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -429,6 +429,14 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 		__flush_anon_page(vma, page, vmaddr);
 }
 
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+	/* highmem pages are always flushed upon kunmap already */
+	if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page))
+		__cpuc_flush_dcache_page(page_address(page));
+}
+
 #define flush_dcache_mmap_lock(mapping) \
 	spin_lock_irq(&(mapping)->tree_lock)
 #define flush_dcache_mmap_unlock(mapping) \
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 7b9d27e749b..b3e656c6fb7 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -8,6 +8,21 @@
 #define CPUID_TCM	2
 #define CPUID_TLBTYPE	3
 
+#define CPUID_EXT_PFR0	"c1, 0"
+#define CPUID_EXT_PFR1	"c1, 1"
+#define CPUID_EXT_DFR0	"c1, 2"
+#define CPUID_EXT_AFR0	"c1, 3"
+#define CPUID_EXT_MMFR0	"c1, 4"
+#define CPUID_EXT_MMFR1	"c1, 5"
+#define CPUID_EXT_MMFR2	"c1, 6"
+#define CPUID_EXT_MMFR3	"c1, 7"
+#define CPUID_EXT_ISAR0	"c2, 0"
+#define CPUID_EXT_ISAR1	"c2, 1"
+#define CPUID_EXT_ISAR2	"c2, 2"
+#define CPUID_EXT_ISAR3	"c2, 3"
+#define CPUID_EXT_ISAR4	"c2, 4"
+#define CPUID_EXT_ISAR5	"c2, 5"
+
 #ifdef CONFIG_CPU_CP15
 #define read_cpuid(reg)							\
 	({								\
@@ -18,9 +33,19 @@
 		    : "cc");						\
 		__val;							\
 	})
+#define read_cpuid_ext(ext_reg)						\
+	({								\
+		unsigned int __val;					\
+		asm("mrc	p15, 0, %0, c0, " ext_reg		\
+		    : "=r" (__val)					\
+		    :							\
+		    : "cc");						\
+		__val;							\
+	})
 #else
 extern unsigned int processor_id;
 #define read_cpuid(reg) (processor_id)
+#define read_cpuid_ext(reg) 0
 #endif
 
 /*
diff --git a/arch/arm/include/asm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h
deleted file mode 100644
index e521b70713c..00000000000
--- a/arch/arm/include/asm/hardware/arm_twd.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_HARDWARE_TWD_H
-#define __ASM_HARDWARE_TWD_H
-
-#define TWD_TIMER_LOAD 			0x00
-#define TWD_TIMER_COUNTER		0x04
-#define TWD_TIMER_CONTROL		0x08
-#define TWD_TIMER_INTSTAT		0x0C
-
-#define TWD_WDOG_LOAD			0x20
-#define TWD_WDOG_COUNTER		0x24
-#define TWD_WDOG_CONTROL		0x28
-#define TWD_WDOG_INTSTAT		0x2C
-#define TWD_WDOG_RESETSTAT		0x30
-#define TWD_WDOG_DISABLE		0x34
-
-#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
-
-#endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 64f2252a25c..cdb9022716f 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -24,6 +24,8 @@
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104
+#define L2X0_TAG_LATENCY_CTRL		0x108
+#define L2X0_DATA_LATENCY_CTRL		0x10C
 #define L2X0_EVENT_CNT_CTRL		0x200
 #define L2X0_EVENT_CNT1_CFG		0x204
 #define L2X0_EVENT_CNT0_CFG		0x208
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
new file mode 100644
index 00000000000..6a6c66be7f6
--- /dev/null
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -0,0 +1,138 @@
+/* arch/arm/include/asm/hardware/pl080.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * ARM PrimeCell PL080 DMA controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, there are some Samsung updates to this controller block which
+ * make it not entierly compatible with the PL080 specification from
+ * ARM. When in doubt, check the Samsung documentation first.
+ *
+ * The Samsung defines are PL080S, and add an extra controll register,
+ * the ability to move more than 2^11 counts of data and some extra
+ * OneNAND features.
+*/
+
+#define PL080_INT_STATUS			(0x00)
+#define PL080_TC_STATUS				(0x04)
+#define PL080_TC_CLEAR				(0x08)
+#define PL080_ERR_STATUS			(0x0C)
+#define PL080_ERR_CLEAR				(0x10)
+#define PL080_RAW_TC_STATUS			(0x14)
+#define PL080_RAW_ERR_STATUS			(0x18)
+#define PL080_EN_CHAN				(0x1c)
+#define PL080_SOFT_BREQ				(0x20)
+#define PL080_SOFT_SREQ				(0x24)
+#define PL080_SOFT_LBREQ			(0x28)
+#define PL080_SOFT_LSREQ			(0x2C)
+
+#define PL080_CONFIG				(0x30)
+#define PL080_CONFIG_M2_BE			(1 << 2)
+#define PL080_CONFIG_M1_BE			(1 << 1)
+#define PL080_CONFIG_ENABLE			(1 << 0)
+
+#define PL080_SYNC				(0x34)
+
+/* Per channel configuration registers */
+
+#define PL008_Cx_STRIDE				(0x20)
+#define PL080_Cx_BASE(x)			((0x100 + (x * 0x20)))
+#define PL080_Cx_SRC_ADDR(x)			((0x100 + (x * 0x20)))
+#define PL080_Cx_DST_ADDR(x)			((0x104 + (x * 0x20)))
+#define PL080_Cx_LLI(x)				((0x108 + (x * 0x20)))
+#define PL080_Cx_CONTROL(x)			((0x10C + (x * 0x20)))
+#define PL080_Cx_CONFIG(x)			((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONTROL2(x)			((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONFIG(x)			((0x114 + (x * 0x20)))
+
+#define PL080_CH_SRC_ADDR			(0x00)
+#define PL080_CH_DST_ADDR			(0x04)
+#define PL080_CH_LLI				(0x08)
+#define PL080_CH_CONTROL			(0x0C)
+#define PL080_CH_CONFIG				(0x10)
+#define PL080S_CH_CONTROL2			(0x10)
+#define PL080S_CH_CONFIG			(0x14)
+
+#define PL080_LLI_ADDR_MASK			(0x3fffffff << 2)
+#define PL080_LLI_ADDR_SHIFT			(2)
+#define PL080_LLI_LM_AHB2			(1 << 0)
+
+#define PL080_CONTROL_TC_IRQ_EN			(1 << 31)
+#define PL080_CONTROL_PROT_MASK			(0x7 << 28)
+#define PL080_CONTROL_PROT_SHIFT		(28)
+#define PL080_CONTROL_PROT_SYS			(1 << 28)
+#define PL080_CONTROL_DST_INCR			(1 << 27)
+#define PL080_CONTROL_SRC_INCR			(1 << 26)
+#define PL080_CONTROL_DST_AHB2			(1 << 25)
+#define PL080_CONTROL_SRC_AHB2			(1 << 24)
+#define PL080_CONTROL_DWIDTH_MASK		(0x7 << 21)
+#define PL080_CONTROL_DWIDTH_SHIFT		(21)
+#define PL080_CONTROL_SWIDTH_MASK		(0x7 << 18)
+#define PL080_CONTROL_SWIDTH_SHIFT		(18)
+#define PL080_CONTROL_DB_SIZE_MASK		(0x7 << 15)
+#define PL080_CONTROL_DB_SIZE_SHIFT		(15)
+#define PL080_CONTROL_SB_SIZE_MASK		(0x7 << 12)
+#define PL080_CONTROL_SB_SIZE_SHIFT		(12)
+#define PL080_CONTROL_TRANSFER_SIZE_MASK	(0xfff << 0)
+#define PL080_CONTROL_TRANSFER_SIZE_SHIFT	(0)
+
+#define PL080_BSIZE_1				(0x0)
+#define PL080_BSIZE_4				(0x1)
+#define PL080_BSIZE_8				(0x2)
+#define PL080_BSIZE_16				(0x3)
+#define PL080_BSIZE_32				(0x4)
+#define PL080_BSIZE_64				(0x5)
+#define PL080_BSIZE_128				(0x6)
+#define PL080_BSIZE_256				(0x7)
+
+#define PL080_WIDTH_8BIT			(0x0)
+#define PL080_WIDTH_16BIT			(0x1)
+#define PL080_WIDTH_32BIT			(0x2)
+
+#define PL080_CONFIG_HALT			(1 << 18)
+#define PL080_CONFIG_ACTIVE			(1 << 17)  /* RO */
+#define PL080_CONFIG_LOCK			(1 << 16)
+#define PL080_CONFIG_TC_IRQ_MASK		(1 << 15)
+#define PL080_CONFIG_ERR_IRQ_MASK		(1 << 14)
+#define PL080_CONFIG_FLOW_CONTROL_MASK		(0x7 << 11)
+#define PL080_CONFIG_FLOW_CONTROL_SHIFT		(11)
+#define PL080_CONFIG_DST_SEL_MASK		(0xf << 6)
+#define PL080_CONFIG_DST_SEL_SHIFT		(6)
+#define PL080_CONFIG_SRC_SEL_MASK		(0xf << 1)
+#define PL080_CONFIG_SRC_SEL_SHIFT		(1)
+#define PL080_CONFIG_ENABLE			(1 << 0)
+
+#define PL080_FLOW_MEM2MEM			(0x0)
+#define PL080_FLOW_MEM2PER			(0x1)
+#define PL080_FLOW_PER2MEM			(0x2)
+#define PL080_FLOW_SRC2DST			(0x3)
+#define PL080_FLOW_SRC2DST_DST			(0x4)
+#define PL080_FLOW_MEM2PER_PER			(0x5)
+#define PL080_FLOW_PER2MEM_PER			(0x6)
+#define PL080_FLOW_SRC2DST_SRC			(0x7)
+
+/* DMA linked list chain structure */
+
+struct pl080_lli {
+	u32	src_addr;
+	u32	dst_addr;
+	u32	next_lli;
+	u32	control0;
+};
+
+struct pl080s_lli {
+	u32	src_addr;
+	u32	dst_addr;
+	u32	next_lli;
+	u32	control0;
+	u32	control1;
+};
+
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index f87328d4a18..5d72550a809 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -41,7 +41,7 @@
 #define VIC_PL192_VECT_ADDR		0xF00
 
 #ifndef __ASSEMBLY__
-void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
new file mode 100644
index 00000000000..50c7e7cfd67
--- /dev/null
+++ b/arch/arm/include/asm/localtimer.h
@@ -0,0 +1,63 @@
+/*
+ *  arch/arm/include/asm/localtimer.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_LOCALTIMER_H
+#define __ASM_ARM_LOCALTIMER_H
+
+struct clock_event_device;
+
+/*
+ * Setup a per-cpu timer, whether it be a local timer or dummy broadcast
+ */
+void percpu_timer_setup(void);
+
+/*
+ * Called from assembly, this is the local timer IRQ handler
+ */
+asmlinkage void do_local_timer(struct pt_regs *);
+
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+#ifdef CONFIG_HAVE_ARM_TWD
+
+#include "smp_twd.h"
+
+#define local_timer_ack()	twd_timer_ack()
+#define local_timer_stop()	twd_timer_stop()
+
+#else
+
+/*
+ * Platform provides this to acknowledge a local timer IRQ.
+ * Returns true if the local timer IRQ is to be processed.
+ */
+int local_timer_ack(void);
+
+/*
+ * Stop a local timer interrupt.
+ */
+void local_timer_stop(void);
+
+#endif
+
+/*
+ * Setup a local timer interrupt for a CPU.
+ */
+void local_timer_setup(struct clock_event_device *);
+
+#else
+
+static inline void local_timer_stop(void)
+{
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 58cf91f38e6..742c2aaeb02 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -30,6 +30,14 @@ struct map_desc {
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
+
+struct mem_type;
+extern const struct mem_type *get_mem_type(unsigned int type);
+/*
+ * external interface to remap single page with appropriate type
+ */
+extern int ioremap_page(unsigned long virt, unsigned long phys,
+			const struct mem_type *mtype);
 #else
 #define iotable_init(map,num)	do { } while (0)
 #endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 110295c5461..1cd2d6416bd 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -342,7 +342,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 	return __va(ptr);
 }
 
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+#define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
 
 /*
  * Conversion functions: convert a page and protection to a page entry,
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 1845892260e..6a89567ffc5 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -71,6 +71,7 @@ struct thread_struct {
 		regs->ARM_cpsr = USR26_MODE;				\
 	if (elf_hwcap & HWCAP_THUMB && pc & 1)				\
 		regs->ARM_cpsr |= PSR_T_BIT;				\
+	regs->ARM_cpsr |= PSR_ENDSTATE;					\
 	regs->ARM_pc = pc & ~1;		/* pc */			\
 	regs->ARM_sp = sp;		/* sp */			\
 	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 236a06b9b7c..67b833c9b6b 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -50,6 +50,7 @@
 #define PSR_F_BIT	0x00000040
 #define PSR_I_BIT	0x00000080
 #define PSR_A_BIT	0x00000100
+#define PSR_E_BIT	0x00000200
 #define PSR_J_BIT	0x01000000
 #define PSR_Q_BIT	0x08000000
 #define PSR_V_BIT	0x10000000
@@ -65,6 +66,22 @@
 #define PSR_x		0x0000ff00	/* Extension		*/
 #define PSR_c		0x000000ff	/* Control		*/
 
+/*
+ * ARMv7 groups of APSR bits
+ */
+#define PSR_ISET_MASK	0x01000010	/* ISA state (J, T) mask */
+#define PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
+#define PSR_ENDIAN_MASK	0x00000200	/* Endianness state mask */
+
+/*
+ * Default endianness state
+ */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define PSR_ENDSTATE	PSR_E_BIT
+#else
+#define PSR_ENDSTATE	0
+#endif
+
 #ifndef __ASSEMBLY__
 
 /*
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index ada93a8fc2e..4fc1565e4f9 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -29,6 +29,7 @@
 #define SZ_512				0x00000200
 
 #define SZ_1K                           0x00000400
+#define SZ_2K                           0x00000800
 #define SZ_4K                           0x00001000
 #define SZ_8K                           0x00002000
 #define SZ_16K                          0x00004000
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 5995935338e..a06e735b262 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -41,7 +41,7 @@ extern void show_ipi_list(struct seq_file *p);
 asmlinkage void do_IPI(struct pt_regs *regs);
 
 /*
- * Setup the SMP cpu_possible_map
+ * Setup the set of possible CPUs (via set_cpu_possible)
  */
 extern void smp_init_cpus(void);
 
@@ -56,11 +56,6 @@ extern void smp_store_cpu_info(unsigned int cpuid);
 extern void smp_cross_call(const struct cpumask *mask);
 
 /*
- * Broadcast a clock event to other CPUs.
- */
-extern void smp_timer_broadcast(const struct cpumask *mask);
-
-/*
  * Boot a secondary CPU, and assign it the specified idle task.
  * This also gives us the initial stack to use for this CPU.
  */
@@ -101,43 +96,8 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 #define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /*
- * Local timer interrupt handling function (can be IPI'ed).
- */
-extern void local_timer_interrupt(void);
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/*
- * Stop a local timer interrupt.
- */
-extern void local_timer_stop(void);
-
-/*
- * Platform provides this to acknowledge a local timer IRQ
- */
-extern int local_timer_ack(void);
-
-#else
-
-static inline void local_timer_stop(void)
-{
-}
-
-#endif
-
-/*
- * Setup a local timer interrupt for a CPU.
- */
-extern void local_timer_setup(void);
-
-/*
  * show local interrupt info
  */
 extern void show_local_irqs(struct seq_file *);
 
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
 #endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
new file mode 100644
index 00000000000..2376835015d
--- /dev/null
+++ b/arch/arm/include/asm/smp_scu.h
@@ -0,0 +1,7 @@
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+unsigned int scu_get_core_count(void __iomem *);
+void scu_enable(void __iomem *);
+
+#endif
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
new file mode 100644
index 00000000000..7be0978b262
--- /dev/null
+++ b/arch/arm/include/asm/smp_twd.h
@@ -0,0 +1,12 @@
+#ifndef __ASMARM_SMP_TWD_H
+#define __ASMARM_SMP_TWD_H
+
+struct clock_event_device;
+
+extern void __iomem *twd_base;
+
+void twd_timer_stop(void);
+int twd_timer_ack(void);
+void twd_timer_setup(struct clock_event_device *);
+
+#endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index a62218013c7..c964f3fc3bc 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -40,6 +40,12 @@
 #define TLB_V6_I_ASID	(1 << 18)
 
 #define TLB_BTB		(1 << 28)
+
+/* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */
+#define TLB_V7_UIS_PAGE	(1 << 19)
+#define TLB_V7_UIS_FULL (1 << 20)
+#define TLB_V7_UIS_ASID (1 << 21)
+
 #define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
 #define TLB_DCLEAN	(1 << 30)
 #define TLB_WB		(1 << 31)
@@ -176,9 +182,17 @@
 # define v6wbi_always_flags	(-1UL)
 #endif
 
+#ifdef CONFIG_SMP
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+			 TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
+#else
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+			 TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
+#endif
+
 #ifdef CONFIG_CPU_TLB_V7
-# define v7wbi_possible_flags	v6wbi_tlb_flags
-# define v7wbi_always_flags	v6wbi_tlb_flags
+# define v7wbi_possible_flags	v7wbi_tlb_flags
+# define v7wbi_always_flags	v7wbi_tlb_flags
 # ifdef _TLB
 #  define MULTI_TLB 1
 # else
@@ -316,6 +330,8 @@ static inline void local_flush_tlb_all(void)
 		asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
 	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
 		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V7_UIS_FULL))
+		asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -351,6 +367,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
 	if (tlb_flag(TLB_V6_I_ASID))
 		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+	if (tlb_flag(TLB_V7_UIS_ASID))
+		asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -389,6 +407,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+	if (tlb_flag(TLB_V7_UIS_PAGE))
+		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -424,6 +444,8 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V7_UIS_PAGE))
+		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 7897464e0c2..0da9bc9b3b1 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -386,7 +386,9 @@ do {									\
 #ifdef CONFIG_MMU
 extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
 extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check __copy_to_user_std(void __user *to, const void *from, unsigned long n);
 extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
+extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n);
 #else
 #define __copy_from_user(to,from,n)	(memcpy(to, (void __force *)from, n), 0)
 #define __copy_to_user(to,from,n)	(memcpy((void __force *)to, from, n), 0)
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 11a5197a221..ff89d0b3abc 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
+obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 83b1da6b7ba..fc8af43c500 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -482,6 +482,9 @@ __und_usr:
 	subeq	r4, r2, #4			@ ARM instr at LR - 4
 	subne	r4, r2, #2			@ Thumb instr at LR - 2
 1:	ldreqt	r0, [r4]
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	reveq	r0, r0				@ little endian instruction
+#endif
 	beq	call_fpe
 	@ Thumb instruction
 #if __LINUX_ARM_ARCH__ >= 7
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index b55cb033180..366e5097a41 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -210,6 +210,9 @@ ENTRY(vector_swi)
   A710(	teq	ip, #0x0f000000						)
   A710(	bne	.Larm710bug						)
 #endif
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	rev	r10, r10			@ little endian instruction
+#endif
 
 #elif defined(CONFIG_AEABI)
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index c3265a2e7cd..1585423699e 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -365,7 +365,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.ARM_r2 = (unsigned long)fn;
 	regs.ARM_r3 = (unsigned long)do_exit;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE;
+	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 80b8b5c7e07..442b87476f9 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -426,9 +426,13 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka,
 		 */
 		thumb = handler & 1;
 
-		if (thumb)
+		if (thumb) {
 			cpsr |= PSR_T_BIT;
-		else
+#if __LINUX_ARM_ARCH__ >= 7
+			/* clear the If-Then Thumb-2 execution state */
+			cpsr &= ~PSR_IT_MASK;
+#endif
+		} else
 			cpsr &= ~PSR_T_BIT;
 	}
 #endif
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 6014dfd22af..de885fd256c 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -22,16 +22,20 @@
 #include <linux/smp.h>
 #include <linux/seq_file.h>
 #include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
 
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/cpu.h>
+#include <asm/cputype.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/processor.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
+#include <asm/localtimer.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -163,7 +167,7 @@ int __cpuexit __cpu_disable(void)
 	 * Take this CPU offline.  Once we clear this, we can't return,
 	 * and we must not schedule until we're ready to give up the cpu.
 	 */
-	cpu_clear(cpu, cpu_online_map);
+	set_cpu_online(cpu, false);
 
 	/*
 	 * OK - migrate IRQs away from this CPU
@@ -274,9 +278,9 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	local_fiq_enable();
 
 	/*
-	 * Setup local timer for this CPU.
+	 * Setup the percpu timer for this CPU.
 	 */
-	local_timer_setup();
+	percpu_timer_setup();
 
 	calibrate_delay();
 
@@ -285,7 +289,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	/*
 	 * OK, now it's safe to let the boot CPU continue
 	 */
-	cpu_set(cpu, cpu_online_map);
+	set_cpu_online(cpu, true);
 
 	/*
 	 * OK, it's off to the idle thread for us
@@ -383,10 +387,16 @@ void show_local_irqs(struct seq_file *p)
 	seq_putc(p, '\n');
 }
 
+/*
+ * Timer (local or broadcast) support
+ */
+static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
+
 static void ipi_timer(void)
 {
+	struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
 	irq_enter();
-	local_timer_interrupt();
+	evt->event_handler(evt);
 	irq_exit();
 }
 
@@ -405,6 +415,42 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs)
 }
 #endif
 
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+static void smp_timer_broadcast(const struct cpumask *mask)
+{
+	send_ipi_message(mask, IPI_TIMER);
+}
+
+static void broadcast_timer_set_mode(enum clock_event_mode mode,
+	struct clock_event_device *evt)
+{
+}
+
+static void local_timer_setup(struct clock_event_device *evt)
+{
+	evt->name	= "dummy_timer";
+	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
+			  CLOCK_EVT_FEAT_PERIODIC |
+			  CLOCK_EVT_FEAT_DUMMY;
+	evt->rating	= 400;
+	evt->mult	= 1;
+	evt->set_mode	= broadcast_timer_set_mode;
+	evt->broadcast	= smp_timer_broadcast;
+
+	clockevents_register_device(evt);
+}
+#endif
+
+void __cpuinit percpu_timer_setup(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
+
+	evt->cpumask = cpumask_of(cpu);
+
+	local_timer_setup(evt);
+}
+
 static DEFINE_SPINLOCK(stop_lock);
 
 /*
@@ -417,7 +463,7 @@ static void ipi_cpu_stop(unsigned int cpu)
 	dump_stack();
 	spin_unlock(&stop_lock);
 
-	cpu_clear(cpu, cpu_online_map);
+	set_cpu_online(cpu, false);
 
 	local_fiq_disable();
 	local_irq_disable();
@@ -501,11 +547,6 @@ void smp_send_reschedule(int cpu)
 	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
-void smp_timer_broadcast(const struct cpumask *mask)
-{
-	send_ipi_message(mask, IPI_TIMER);
-}
-
 void smp_send_stop(void)
 {
 	cpumask_t mask = cpu_online_map;
@@ -545,6 +586,12 @@ struct tlb_args {
 	unsigned long ta_end;
 };
 
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
 static inline void ipi_flush_tlb_all(void *ignored)
 {
 	local_flush_tlb_all();
@@ -587,51 +634,61 @@ static inline void ipi_flush_tlb_kernel_range(void *arg)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+	if (tlb_ops_need_broadcast())
+		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+	else
+		local_flush_tlb_all();
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+	if (tlb_ops_need_broadcast())
+		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+	else
+		local_flush_tlb_mm(mm);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 {
-	struct tlb_args ta;
-
-	ta.ta_vma = vma;
-	ta.ta_start = uaddr;
-
-	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_vma = vma;
+		ta.ta_start = uaddr;
+		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	} else
+		local_flush_tlb_page(vma, uaddr);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
 {
-	struct tlb_args ta;
-
-	ta.ta_start = kaddr;
-
-	on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_start = kaddr;
+		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+	} else
+		local_flush_tlb_kernel_page(kaddr);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma,
                      unsigned long start, unsigned long end)
 {
-	struct tlb_args ta;
-
-	ta.ta_vma = vma;
-	ta.ta_start = start;
-	ta.ta_end = end;
-
-	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_vma = vma;
+		ta.ta_start = start;
+		ta.ta_end = end;
+		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	} else
+		local_flush_tlb_range(vma, start, end);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	struct tlb_args ta;
-
-	ta.ta_start = start;
-	ta.ta_end = end;
-
-	on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_start = start;
+		ta.ta_end = end;
+		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+	} else
+		local_flush_tlb_kernel_range(start, end);
 }
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
new file mode 100644
index 00000000000..d3831f616ee
--- /dev/null
+++ b/arch/arm/kernel/smp_scu.c
@@ -0,0 +1,48 @@
+/*
+ *  linux/arch/arm/kernel/smp_scu.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+
+#define SCU_CTRL		0x00
+#define SCU_CONFIG		0x04
+#define SCU_CPU_STATUS		0x08
+#define SCU_INVALIDATE		0x0c
+#define SCU_FPGA_REVISION	0x10
+
+/*
+ * Get the number of CPU cores from the SCU configuration
+ */
+unsigned int __init scu_get_core_count(void __iomem *scu_base)
+{
+	unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG);
+	return (ncores & 0x03) + 1;
+}
+
+/*
+ * Enable the SCU
+ */
+void __init scu_enable(void __iomem *scu_base)
+{
+	u32 scu_ctrl;
+
+	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+	scu_ctrl |= 1;
+	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+
+	/*
+	 * Ensure that the data accessed by CPU0 before the SCU was
+	 * initialised is visible to the other CPUs.
+	 */
+	flush_cache_all();
+}
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
new file mode 100644
index 00000000000..d8c88c633c6
--- /dev/null
+++ b/arch/arm/kernel/smp_twd.c
@@ -0,0 +1,175 @@
+/*
+ *  linux/arch/arm/kernel/smp_twd.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/jiffies.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/smp_twd.h>
+#include <asm/hardware/gic.h>
+
+#define TWD_TIMER_LOAD 			0x00
+#define TWD_TIMER_COUNTER		0x04
+#define TWD_TIMER_CONTROL		0x08
+#define TWD_TIMER_INTSTAT		0x0C
+
+#define TWD_WDOG_LOAD			0x20
+#define TWD_WDOG_COUNTER		0x24
+#define TWD_WDOG_CONTROL		0x28
+#define TWD_WDOG_INTSTAT		0x2C
+#define TWD_WDOG_RESETSTAT		0x30
+#define TWD_WDOG_DISABLE		0x34
+
+#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
+
+/* set up by the platform code */
+void __iomem *twd_base;
+
+static unsigned long twd_timer_rate;
+
+static void twd_set_mode(enum clock_event_mode mode,
+			struct clock_event_device *clk)
+{
+	unsigned long ctrl;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* timer load already set up */
+		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
+			| TWD_TIMER_CONTROL_PERIODIC;
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		ctrl = 0;
+	}
+
+	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+}
+
+static int twd_set_next_event(unsigned long evt,
+			struct clock_event_device *unused)
+{
+	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
+
+	ctrl |= TWD_TIMER_CONTROL_ENABLE;
+
+	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
+	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+
+	return 0;
+}
+
+/*
+ * local_timer_ack: checks for a local timer interrupt.
+ *
+ * If a local timer interrupt has occurred, acknowledge and return 1.
+ * Otherwise, return 0.
+ */
+int twd_timer_ack(void)
+{
+	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
+		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
+		return 1;
+	}
+
+	return 0;
+}
+
+static void __cpuinit twd_calibrate_rate(void)
+{
+	unsigned long load, count;
+	u64 waitjiffies;
+
+	/*
+	 * If this is the first time round, we need to work out how fast
+	 * the timer ticks
+	 */
+	if (twd_timer_rate == 0) {
+		printk(KERN_INFO "Calibrating local timer... ");
+
+		/* Wait for a tick to start */
+		waitjiffies = get_jiffies_64() + 1;
+
+		while (get_jiffies_64() < waitjiffies)
+			udelay(10);
+
+		/* OK, now the tick has started, let's get the timer going */
+		waitjiffies += 5;
+
+				 /* enable, no interrupt or reload */
+		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
+
+				 /* maximum value */
+		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
+
+		while (get_jiffies_64() < waitjiffies)
+			udelay(10);
+
+		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
+
+		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
+
+		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
+			(twd_timer_rate / 100000) % 100);
+	}
+
+	load = twd_timer_rate / HZ;
+
+	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
+}
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit twd_timer_setup(struct clock_event_device *clk)
+{
+	unsigned long flags;
+
+	twd_calibrate_rate();
+
+	clk->name = "local_timer";
+	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	clk->rating = 350;
+	clk->set_mode = twd_set_mode;
+	clk->set_next_event = twd_set_next_event;
+	clk->shift = 20;
+	clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
+	clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
+	clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+
+	/* Make sure our local interrupt controller has this enabled */
+	local_irq_save(flags);
+	get_irq_chip(clk->irq)->unmask(clk->irq);
+	local_irq_restore(flags);
+
+	clockevents_register_device(clk);
+}
+
+/*
+ * take a local timer down
+ */
+void __cpuexit twd_timer_stop(void)
+{
+	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index c90f27250ea..6c077979254 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -141,6 +141,7 @@ SECTIONS
 
 	.data : AT(__data_loc) {
 		_data = .;		/* address in memory */
+		_sdata = .;
 
 		/*
 		 * first, the init task union, aligned
@@ -192,6 +193,7 @@ SECTIONS
 		__bss_start = .;	/* BSS				*/
 		*(.bss)
 		*(COMMON)
+		__bss_stop = .;
 		_end = .;
 	}
 					/* Stabs debugging sections.	*/
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 866f84a586f..030ba7219f4 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -29,6 +29,9 @@ else
 endif
 endif
 
+# using lib_ here won't override already available weak symbols
+obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
+
 lib-$(CONFIG_MMU) += $(mmu-y)
 
 ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 4d6bc71231f..844f56785eb 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -18,7 +18,8 @@
  *          : sz   - number of bytes to clear
  * Returns  : number of bytes NOT cleared
  */
-ENTRY(__clear_user)
+ENTRY(__clear_user_std)
+WEAK(__clear_user)
 		stmfd	sp!, {r1, lr}
 		mov	r2, #0
 		cmp	r1, #4
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 22f968bbdff..878820f0a32 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -86,7 +86,8 @@
 
 	.text
 
-ENTRY(__copy_to_user)
+ENTRY(__copy_to_user_std)
+WEAK(__copy_to_user)
 
 #include "copy_template.S"
 
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
new file mode 100644
index 00000000000..6b967ffb655
--- /dev/null
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -0,0 +1,228 @@
+/*
+ *  linux/arch/arm/lib/uaccess_with_memcpy.c
+ *
+ *  Written by: Lennert Buytenhek and Nicolas Pitre
+ *  Copyright (C) 2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+#include <linux/rwsem.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h> /* for in_atomic() */
+#include <asm/current.h>
+#include <asm/page.h>
+
+static int
+pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
+{
+	unsigned long addr = (unsigned long)_addr;
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *pte;
+	spinlock_t *ptl;
+
+	pgd = pgd_offset(current->mm, addr);
+	if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd)))
+		return 0;
+
+	pmd = pmd_offset(pgd, addr);
+	if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd)))
+		return 0;
+
+	pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl);
+	if (unlikely(!pte_present(*pte) || !pte_young(*pte) ||
+	    !pte_write(*pte) || !pte_dirty(*pte))) {
+		pte_unmap_unlock(pte, ptl);
+		return 0;
+	}
+
+	*ptep = pte;
+	*ptlp = ptl;
+
+	return 1;
+}
+
+static unsigned long noinline
+__copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
+{
+	int atomic;
+
+	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
+		memcpy((void *)to, from, n);
+		return 0;
+	}
+
+	/* the mmap semaphore is taken only if not in an atomic context */
+	atomic = in_atomic();
+
+	if (!atomic)
+		down_read(&current->mm->mmap_sem);
+	while (n) {
+		pte_t *pte;
+		spinlock_t *ptl;
+		int tocopy;
+
+		while (!pin_page_for_write(to, &pte, &ptl)) {
+			if (!atomic)
+				up_read(&current->mm->mmap_sem);
+			if (__put_user(0, (char __user *)to))
+				goto out;
+			if (!atomic)
+				down_read(&current->mm->mmap_sem);
+		}
+
+		tocopy = (~(unsigned long)to & ~PAGE_MASK) + 1;
+		if (tocopy > n)
+			tocopy = n;
+
+		memcpy((void *)to, from, tocopy);
+		to += tocopy;
+		from += tocopy;
+		n -= tocopy;
+
+		pte_unmap_unlock(pte, ptl);
+	}
+	if (!atomic)
+		up_read(&current->mm->mmap_sem);
+
+out:
+	return n;
+}
+
+unsigned long
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	/*
+	 * This test is stubbed out of the main function above to keep
+	 * the overhead for small copies low by avoiding a large
+	 * register dump on the stack just to reload them right away.
+	 * With frame pointer disabled, tail call optimization kicks in
+	 * as well making this test almost invisible.
+	 */
+	if (n < 64)
+		return __copy_to_user_std(to, from, n);
+	return __copy_to_user_memcpy(to, from, n);
+}
+	
+static unsigned long noinline
+__clear_user_memset(void __user *addr, unsigned long n)
+{
+	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
+		memset((void *)addr, 0, n);
+		return 0;
+	}
+
+	down_read(&current->mm->mmap_sem);
+	while (n) {
+		pte_t *pte;
+		spinlock_t *ptl;
+		int tocopy;
+
+		while (!pin_page_for_write(addr, &pte, &ptl)) {
+			up_read(&current->mm->mmap_sem);
+			if (__put_user(0, (char __user *)addr))
+				goto out;
+			down_read(&current->mm->mmap_sem);
+		}
+
+		tocopy = (~(unsigned long)addr & ~PAGE_MASK) + 1;
+		if (tocopy > n)
+			tocopy = n;
+
+		memset((void *)addr, 0, tocopy);
+		addr += tocopy;
+		n -= tocopy;
+
+		pte_unmap_unlock(pte, ptl);
+	}
+	up_read(&current->mm->mmap_sem);
+
+out:
+	return n;
+}
+
+unsigned long __clear_user(void __user *addr, unsigned long n)
+{
+	/* See rational for this in __copy_to_user() above. */
+	if (n < 64)
+		return __clear_user_std(addr, n);
+	return __clear_user_memset(addr, n);
+}
+
+#if 0
+
+/*
+ * This code is disabled by default, but kept around in case the chosen
+ * thresholds need to be revalidated.  Some overhead (small but still)
+ * would be implied by a runtime determined variable threshold, and
+ * so far the measurement on concerned targets didn't show a worthwhile
+ * variation.
+ *
+ * Note that a fairly precise sched_clock() implementation is needed
+ * for results to make some sense.
+ */
+
+#include <linux/vmalloc.h>
+
+static int __init test_size_treshold(void)
+{
+	struct page *src_page, *dst_page;
+	void *user_ptr, *kernel_ptr;
+	unsigned long long t0, t1, t2;
+	int size, ret;
+
+	ret = -ENOMEM;
+	src_page = alloc_page(GFP_KERNEL);
+	if (!src_page)
+		goto no_src;
+	dst_page = alloc_page(GFP_KERNEL);
+	if (!dst_page)
+		goto no_dst;
+	kernel_ptr = page_address(src_page);
+	user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__P010));
+	if (!user_ptr)
+		goto no_vmap;
+
+	/* warm up the src page dcache */
+	ret = __copy_to_user_memcpy(user_ptr, kernel_ptr, PAGE_SIZE);
+
+	for (size = PAGE_SIZE; size >= 4; size /= 2) {
+		t0 = sched_clock();
+		ret |= __copy_to_user_memcpy(user_ptr, kernel_ptr, size);
+		t1 = sched_clock();
+		ret |= __copy_to_user_std(user_ptr, kernel_ptr, size);
+		t2 = sched_clock();
+		printk("copy_to_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
+	}
+
+	for (size = PAGE_SIZE; size >= 4; size /= 2) {
+		t0 = sched_clock();
+		ret |= __clear_user_memset(user_ptr, size);
+		t1 = sched_clock();
+		ret |= __clear_user_std(user_ptr, size);
+		t2 = sched_clock();
+		printk("clear_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
+	}
+
+	if (ret)
+		ret = -EFAULT;
+
+	vunmap(user_ptr);
+no_vmap:
+	put_page(dst_page);
+no_dst:
+	put_page(src_page);
+no_src:
+	return ret;
+}
+
+subsys_initcall(test_size_treshold);
+
+#endif
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index e263fda3e2d..970fd6b6753 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -156,6 +156,8 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
  * MCI (SD/MMC)
  */
 static struct at91_mmc_data __initdata afeb9260_mmc_data = {
+	.det_pin 	= AT91_PIN_PC9,
+	.wp_pin 	= AT91_PIN_PC4,
 	.slot_b		= 1,
 	.wire4		= 1,
 };
@@ -164,6 +166,8 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
 
 static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	}, {
 		I2C_BOARD_INFO("fm3130", 0x68),
 	}, {
 		I2C_BOARD_INFO("24c64", 0x50),
@@ -196,6 +200,8 @@ static void __init afeb9260_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(afeb9260_i2c_devices,
 			ARRAY_SIZE(afeb9260_i2c_devices));
+	/* Audio */
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
 }
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 438efbb1748..cc270beadd5 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -218,6 +218,13 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+	},
+};
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -235,7 +242,7 @@ static void __init ek_board_init(void)
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */
-	at91_add_device_i2c(NULL, 0);
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	/* PCK0 provides MCLK to the WM8731 */
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index e4345106ee5..bac578fe0d3 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -43,6 +43,25 @@
 #define clk_is_sys(x)		((x)->type & CLK_TYPE_SYSTEM)
 
 
+/*
+ * Chips have some kind of clocks : group them by functionality
+ */
+#define cpu_has_utmi()		(  cpu_is_at91cap9() \
+				|| cpu_is_at91sam9rl())
+
+#define cpu_has_800M_plla()	(cpu_is_at91sam9g20())
+
+#define cpu_has_pllb()		(!cpu_is_at91sam9rl())
+
+#define cpu_has_upll()		(0)
+
+/* USB host HS & FS */
+#define cpu_has_uhp()		(!cpu_is_at91sam9rl())
+
+/* USB device FS only */
+#define cpu_has_udpfs()		(!cpu_is_at91sam9rl())
+
+
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
 
@@ -140,7 +159,7 @@ static struct clk utmi_clk = {
 };
 static struct clk uhpck = {
 	.name		= "uhpck",
-	.parent		= &pllb,
+	/*.parent		= ... we choose parent at runtime */
 	.mode		= pmc_sys_mode,
 };
 
@@ -173,7 +192,11 @@ static struct clk __init *at91_css_to_clk(unsigned long css)
 		case AT91_PMC_CSS_PLLA:
 			return &plla;
 		case AT91_PMC_CSS_PLLB:
-			return &pllb;
+			if (cpu_has_upll())
+				/* CSS_PLLB == CSS_UPLL */
+				return &utmi_clk;
+			else if (cpu_has_pllb())
+				return &pllb;
 	}
 
 	return NULL;
@@ -322,7 +345,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 			u32	pckr;
 
 			pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-			pckr &= AT91_PMC_CSS_PLLB;	/* clock selection */
+			pckr &= AT91_PMC_CSS;	/* clock selection */
 			pckr |= prescale << 2;
 			at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
 			clk->rate_hz = actual;
@@ -361,7 +384,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 }
 EXPORT_SYMBOL(clk_set_parent);
 
-/* establish PCK0..PCK3 parentage and rate */
+/* establish PCK0..PCKN parentage and rate */
 static void __init init_programmable_clock(struct clk *clk)
 {
 	struct clk	*parent;
@@ -389,11 +412,13 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 	seq_printf(s, "MOR  = %8x\n", at91_sys_read(AT91_CKGR_MOR));
 	seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
 	seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
-	if (!cpu_is_at91sam9rl())
+	if (cpu_has_pllb())
 		seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-	if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+	if (cpu_has_utmi())
 		seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
 	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+	if (cpu_has_upll())
+		seq_printf(s, "USB  = %8x\n", at91_sys_read(AT91_PMC_USB));
 	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
 
 	seq_printf(s, "\n");
@@ -554,16 +579,60 @@ static struct clk *const standard_pmc_clocks[] __initdata = {
 	&clk32k,
 	&main_clk,
 	&plla,
-	&pllb,
-
-	/* PLLB children (USB) */
-	&udpck,
-	&uhpck,
 
 	/* MCK */
 	&mck
 };
 
+/* PLLB generated USB full speed clock init */
+static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
+{
+	/*
+	 * USB clock init:  choose 48 MHz PLLB value,
+	 * disable 48MHz clock during usb peripheral suspend.
+	 *
+	 * REVISIT:  assumes MCK doesn't derive from PLLB!
+	 */
+	uhpck.parent = &pllb;
+
+	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+	if (cpu_is_at91rm9200()) {
+		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+		udpck.pmc_mask = AT91RM9200_PMC_UDP;
+		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+	} else if (cpu_is_at91cap9()) {
+		uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+	}
+	at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+}
+
+/* UPLL generated USB full speed clock init */
+static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
+{
+	/*
+	 * USB clock init: choose 480 MHz from UPLL,
+	 */
+	unsigned int usbr = AT91_PMC_USBS_UPLL;
+
+	/* Setup divider by 10 to reach 48 MHz */
+	usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
+
+	at91_sys_write(AT91_PMC_USB, usbr);
+
+	/* Now set uhpck values */
+	uhpck.parent = &utmi_clk;
+	uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+	uhpck.rate_hz = utmi_clk.parent->rate_hz;
+	uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+}
+
 int __init at91_clock_init(unsigned long main_clock)
 {
 	unsigned tmp, freq, mckr;
@@ -585,43 +654,37 @@ int __init at91_clock_init(unsigned long main_clock)
 
 	/* report if PLLA is more than mildly overclocked */
 	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
-	if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
-	   || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
+	if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
+	   || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
-	/*
-	 * USB clock init:  choose 48 MHz PLLB value,
-	 * disable 48MHz clock during usb peripheral suspend.
-	 *
-	 * REVISIT:  assumes MCK doesn't derive from PLLB!
-	 */
-	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
-	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
-	if (cpu_is_at91rm9200()) {
-		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
-		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
-		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
-		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-	} else if (cpu_is_at91cap9()) {
-		uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+
+	if (cpu_has_upll() && !cpu_has_pllb()) {
+		/* setup UTMI clock as the fourth primary clock
+		 * (instead of pllb) */
+		utmi_clk.type |= CLK_TYPE_PRIMARY;
+		utmi_clk.id = 3;
 	}
-	at91_sys_write(AT91_CKGR_PLLBR, 0);
 
-	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
-	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
 
 	/*
 	 * USB HS clock init
 	 */
-	if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+	if (cpu_has_utmi())
 		/*
 		 * multiplier is hard-wired to 40
 		 * (obtain the USB High Speed 480 MHz when input is 12 MHz)
 		 */
 		utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
-	}
+
+	/*
+	 * USB FS clock init
+	 */
+	if (cpu_has_pllb())
+		at91_pllb_usbfs_clock_init(main_clock);
+	if (cpu_has_upll())
+		/* assumes that we choose UPLL for USB and not PLLA */
+		at91_upll_usbfs_clock_init(main_clock);
 
 	/*
 	 * MCK and CPU derive from one of those primary clocks.
@@ -631,21 +694,31 @@ int __init at91_clock_init(unsigned long main_clock)
 	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
 	freq = mck.parent->rate_hz;
 	freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));				/* prescale */
-	if (cpu_is_at91rm9200())
+	if (cpu_is_at91rm9200()) {
 		mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
-	else if (cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9g20()) {
 		mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
 			freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 		if (mckr & AT91_PMC_PDIV)
 			freq /= 2;		/* processor clock division */
-	} else
+	} else {
 		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
+	}
 
 	/* Register the PMC's standard clocks */
 	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
 		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
 
-	if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+	if (cpu_has_pllb())
+		list_add_tail(&pllb.node, &clocks);
+
+	if (cpu_has_uhp())
+		list_add_tail(&uhpck.node, &clocks);
+
+	if (cpu_has_udpfs())
+		list_add_tail(&udpck.node, &clocks);
+
+	if (cpu_has_utmi())
 		list_add_tail(&utmi_clk.node, &clocks);
 
 	/* MCK and CPU clock are "always on" */
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 9561e33b8a9..64589eaaaee 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,7 +23,7 @@
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
 #define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define		AT91CAP9_PMC_DDR	(1 <<  2)		/* DDR Clock [AT91CAP9 revC only] */
+#define		AT91CAP9_PMC_DDR	(1 <<  2)		/* DDR Clock [CAP9 revC & some SAM9 only] */
 #define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
 #define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
 #define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
@@ -39,11 +39,11 @@
 #define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
 #define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
 
-#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
+#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [some SAM9, CAP9] */
 #define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
 #define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
 #define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
-#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
+#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */
 
 #define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
 #define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
@@ -72,6 +72,7 @@
 #define			AT91_PMC_CSS_MAIN		(1 << 0)
 #define			AT91_PMC_CSS_PLLA		(2 << 0)
 #define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define			AT91_PMC_CSS_UPLL		(3 << 0)	/* [some SAM9 only] */
 #define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
 #define			AT91_PMC_PRES_1			(0 << 2)
 #define			AT91_PMC_PRES_2			(1 << 2)
@@ -88,12 +89,25 @@
 #define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
 #define			AT91SAM9_PMC_MDIV_2		(1 << 8)
 #define			AT91SAM9_PMC_MDIV_4		(2 << 8)
-#define			AT91SAM9_PMC_MDIV_6		(3 << 8)
+#define			AT91SAM9_PMC_MDIV_6		(3 << 8)	/* [some SAM9 only] */
+#define			AT91SAM9_PMC_MDIV_3		(3 << 8)	/* [some SAM9 only] */
 #define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
 #define			AT91_PMC_PDIV_1			(0 << 12)
 #define			AT91_PMC_PDIV_2			(1 << 12)
+#define		AT91_PMC_PLLADIV2	(1 << 12)		/* PLLA divisor by 2 [some SAM9 only] */
+#define			AT91_PMC_PLLADIV2_OFF		(0 << 12)
+#define			AT91_PMC_PLLADIV2_ON		(1 << 12)
 
-#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
+#define	AT91_PMC_USB		(AT91_PMC + 0x38)	/* USB Clock Register [some SAM9 only] */
+#define		AT91_PMC_USBS		(0x1 <<  0)		/* USB OHCI Input clock selection */
+#define			AT91_PMC_USBS_PLLA		(0 << 0)
+#define			AT91_PMC_USBS_UPLL		(1 << 0)
+#define		AT91_PMC_OHCIUSBDIV	(0xF <<  8)		/* Divider for USB OHCI Clock */
+
+#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
+#define		AT91_PMC_CSSMCK		(0x1 <<  8)		/* CSS or Master Clock Selection */
+#define			AT91_PMC_CSSMCK_CSS		(0 << 8)
+#define			AT91_PMC_CSSMCK_MCK		(1 << 8)
 
 #define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
 #define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
@@ -102,7 +116,7 @@
 #define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
 #define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
 #define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [AT91CAP9 only] */
+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [some SAM9, AT91CAP9 only] */
 #define		AT91_PMC_OSCSEL		(1 <<  7)		/* Slow Clock Oscillator [AT91CAP9 revC only] */
 #define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
 #define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index a9c78bc72b8..be747f5c6cd 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -1,11 +1,26 @@
 if ARCH_DAVINCI
 
+config AINTC
+	bool
+
+config CP_INTC
+	bool
+
 menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
 
 config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
+	select AINTC
+
+config ARCH_DAVINCI_DM355
+        bool "DaVinci 355 based system"
+	select AINTC
+
+config ARCH_DAVINCI_DM646x
+        bool "DaVinci 646x based system"
+	select AINTC
 
 comment "DaVinci Board Type"
 
@@ -17,6 +32,34 @@ config MACH_DAVINCI_EVM
 	  Configure this option to specify the whether the board used
 	  for development is a DM644x EVM
 
+config MACH_SFFSDR
+	bool "Lyrtech SFFSDR"
+	depends on ARCH_DAVINCI_DM644x
+	help
+	  Say Y here to select the Lyrtech Small Form Factor
+	  Software Defined Radio (SFFSDR) board.
+
+config MACH_DAVINCI_DM355_EVM
+	bool "TI DM355 EVM"
+	depends on ARCH_DAVINCI_DM355
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM355 EVM
+
+config MACH_DM355_LEOPARD
+	bool "DM355 Leopard board"
+	depends on ARCH_DAVINCI_DM355
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM355 Leopard board.
+
+config MACH_DAVINCI_DM6467_EVM
+	bool "TI DM6467 EVM"
+	depends on ARCH_DAVINCI_DM646x
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM6467 EVM
+
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 1674661942f..059ab78084b 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -4,13 +4,22 @@
 #
 
 # Common objects
-obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
-			   gpio.o devices.o dma.o usb.o
+obj-y 			:= time.o clock.o serial.o io.o psc.o \
+			   gpio.o devices.o dma.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
 obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o
+
+obj-$(CONFIG_AINTC)			+= irq.o
+obj-$(CONFIG_CP_INTC)			+= cp_intc.o
 
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
+obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
+obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
+obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
+obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
new file mode 100644
index 00000000000..5ac2f565d86
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -0,0 +1,298 @@
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem1",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_chipsel		= BIT(14),
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.options		= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static int dm355evm_mmc_gpios = -EINVAL;
+
+static void dm355evm_mmcsd_gpios(unsigned gpio)
+{
+	gpio_request(gpio + 0, "mmc0_ro");
+	gpio_request(gpio + 1, "mmc0_cd");
+	gpio_request(gpio + 2, "mmc1_ro");
+	gpio_request(gpio + 3, "mmc1_cd");
+
+	/* we "know" these are input-only so we don't
+	 * need to call gpio_direction_input()
+	 */
+
+	dm355evm_mmc_gpios = gpio;
+}
+
+static struct i2c_board_info dm355evm_i2c_info[] = {
+	{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
+		.platform_data = dm355evm_mmcsd_gpios,
+		/* plus irq */ },
+	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+
+	gpio_request(5, "dm355evm_msp");
+	gpio_direction_input(5);
+	dm355evm_i2c_info[0].irq = gpio_to_irq(5);
+
+	i2c_register_board_info(1, dm355evm_i2c_info,
+			ARRAY_SIZE(dm355evm_i2c_info));
+}
+
+static struct resource dm355evm_dm9000_rsrc[] = {
+	{
+		/* addr */
+		.start	= 0x04014000,
+		.end	= 0x04014001,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/* data */
+		.start	= 0x04014002,
+		.end	= 0x04014003,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+	},
+};
+
+static struct platform_device dm355evm_dm9000 = {
+	.name		= "dm9000",
+	.id		= -1,
+	.resource	= dm355evm_dm9000_rsrc,
+	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+	&dm355evm_dm9000,
+	&davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_evm_map_io(void)
+{
+	dm355_init();
+}
+
+static int dm355evm_mmc_get_cd(int module)
+{
+	if (!gpio_is_valid(dm355evm_mmc_gpios))
+		return -ENXIO;
+	/* low == card present */
+	return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
+}
+
+static int dm355evm_mmc_get_ro(int module)
+{
+	if (!gpio_is_valid(dm355evm_mmc_gpios))
+		return -ENXIO;
+	/* high == card's write protect switch active */
+	return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355evm_mmc_config = {
+	.get_cd		= dm355evm_mmc_get_cd,
+	.get_ro		= dm355evm_mmc_get_ro,
+	.wires		= 4,
+	.max_freq       = 50000000,
+	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version	= MMC_CTLR_VERSION_1,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender.  If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE	1	/* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+	.byte_len	= SZ_64K / 8,
+	.name		= "at25640a",
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info dm355_evm_spi_info[] __initconst = {
+	{
+		.modalias	= "at25",
+		.platform_data	= &at25640a,
+		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+static __init void dm355_evm_init(void)
+{
+	struct clk *aemif;
+
+	gpio_request(1, "dm9000");
+	gpio_direction_input(1);
+	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
+
+	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
+	if (IS_ERR(aemif))
+		WARN("%s: unable to get AEMIF clock\n", __func__);
+	else
+		clk_enable(aemif);
+
+	platform_add_devices(davinci_evm_devices,
+			     ARRAY_SIZE(davinci_evm_devices));
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	/* NOTE:  NAND flash timings set by the UBL are slower than
+	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+	 * but could be 0x0400008c for about 25% faster page reads.
+	 */
+
+	gpio_request(2, "usb_id_toggle");
+	gpio_direction_output(2, USB_ID_VALUE);
+	/* irlml6401 switches over 1A in under 8 msec */
+	setup_usb(500, 8);
+
+	davinci_setup_mmc(0, &dm355evm_mmc_config);
+	davinci_setup_mmc(1, &dm355evm_mmc_config);
+
+	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
+			ARRAY_SIZE(dm355_evm_spi_info));
+}
+
+static __init void dm355_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io	      = dm355_evm_map_io,
+	.init_irq     = dm355_evm_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = dm355_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
new file mode 100644
index 00000000000..28c9008df4f
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -0,0 +1,296 @@
+/*
+ * DM355 leopard board support
+ *
+ * Based on board-dm355-evm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem1",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_chipsel		= BIT(14),
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.options		= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static int leopard_mmc_gpio = -EINVAL;
+
+static void dm355leopard_mmcsd_gpios(unsigned gpio)
+{
+	gpio_request(gpio + 0, "mmc0_ro");
+	gpio_request(gpio + 1, "mmc0_cd");
+	gpio_request(gpio + 2, "mmc1_ro");
+	gpio_request(gpio + 3, "mmc1_cd");
+
+	/* we "know" these are input-only so we don't
+	 * need to call gpio_direction_input()
+	 */
+
+	leopard_mmc_gpio = gpio;
+}
+
+static struct i2c_board_info dm355leopard_i2c_info[] = {
+	{ I2C_BOARD_INFO("dm355leopard_msp", 0x25),
+		.platform_data = dm355leopard_mmcsd_gpios,
+		/* plus irq */ },
+	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init leopard_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+
+	gpio_request(5, "dm355leopard_msp");
+	gpio_direction_input(5);
+	dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
+
+	i2c_register_board_info(1, dm355leopard_i2c_info,
+			ARRAY_SIZE(dm355leopard_i2c_info));
+}
+
+static struct resource dm355leopard_dm9000_rsrc[] = {
+	{
+		/* addr */
+		.start	= 0x04000000,
+		.end	= 0x04000001,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/* data */
+		.start	= 0x04000016,
+		.end	= 0x04000017,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+	},
+};
+
+static struct platform_device dm355leopard_dm9000 = {
+	.name		= "dm9000",
+	.id		= -1,
+	.resource	= dm355leopard_dm9000_rsrc,
+	.num_resources	= ARRAY_SIZE(dm355leopard_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_leopard_devices[] __initdata = {
+	&dm355leopard_dm9000,
+	&davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_leopard_map_io(void)
+{
+	dm355_init();
+}
+
+static int dm355leopard_mmc_get_cd(int module)
+{
+	if (!gpio_is_valid(leopard_mmc_gpio))
+		return -ENXIO;
+	/* low == card present */
+	return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
+}
+
+static int dm355leopard_mmc_get_ro(int module)
+{
+	if (!gpio_is_valid(leopard_mmc_gpio))
+		return -ENXIO;
+	/* high == card's write protect switch active */
+	return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355leopard_mmc_config = {
+	.get_cd		= dm355leopard_mmc_get_cd,
+	.get_ro		= dm355leopard_mmc_get_ro,
+	.wires		= 4,
+	.max_freq       = 50000000,
+	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender.  If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE	1	/* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+	.byte_len	= SZ_64K / 8,
+	.name		= "at25640a",
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
+	{
+		.modalias	= "at25",
+		.platform_data	= &at25640a,
+		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+static __init void dm355_leopard_init(void)
+{
+	struct clk *aemif;
+
+	gpio_request(9, "dm9000");
+	gpio_direction_input(9);
+	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
+
+	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
+	if (IS_ERR(aemif))
+		WARN("%s: unable to get AEMIF clock\n", __func__);
+	else
+		clk_enable(aemif);
+
+	platform_add_devices(davinci_leopard_devices,
+			     ARRAY_SIZE(davinci_leopard_devices));
+	leopard_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	/* NOTE:  NAND flash timings set by the UBL are slower than
+	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+	 * but could be 0x0400008c for about 25% faster page reads.
+	 */
+
+	gpio_request(2, "usb_id_toggle");
+	gpio_direction_output(2, USB_ID_VALUE);
+	/* irlml6401 switches over 1A in under 8 msec */
+	setup_usb(500, 8);
+
+	davinci_setup_mmc(0, &dm355leopard_mmc_config);
+	davinci_setup_mmc(1, &dm355leopard_mmc_config);
+
+	dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
+			ARRAY_SIZE(dm355_leopard_spi_info));
+}
+
+static __init void dm355_leopard_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io	      = dm355_leopard_map_io,
+	.init_irq     = dm355_leopard_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = dm355_leopard_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index b2e7f9c63bc..d9d40450bdc 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -16,12 +16,11 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/memory.h>
-#include <linux/etherdevice.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
-
+#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -44,6 +43,9 @@
 #include <mach/mux.h>
 #include <mach/psc.h>
 #include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
 
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
@@ -436,45 +438,15 @@ static struct pcf857x_platform_data pcf_data_u35 = {
  *  - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
  *  - ... newer boards may have more
  */
-static struct memory_accessor *at24_mem_acc;
-
-static void at24_setup(struct memory_accessor *mem_acc, void *context)
-{
-	DECLARE_MAC_BUF(mac_str);
-	char mac_addr[6];
-
-	at24_mem_acc = mem_acc;
-
-	/* Read MAC addr from EEPROM */
-	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
-		printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
-		       print_mac(mac_str, mac_addr));
-	}
-}
 
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (256*1024) / 8,
 	.page_size	= 64,
 	.flags		= AT24_FLAG_ADDR16,
-	.setup          = at24_setup,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
 };
 
-int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
-{
-	if (at24_mem_acc)
-		return at24_mem_acc->read(at24_mem_acc, buf, off, count);
-	return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_read);
-
-int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
-{
-	if (at24_mem_acc)
-		return at24_mem_acc->write(at24_mem_acc, buf, off, count);
-	return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_write);
-
 /*
  * MSP430 supports RTC, card detection, input from IR remote, and
  * a bit more.  It triggers interrupts on GPIO(7) from pressing
@@ -545,6 +517,27 @@ static int dm6444evm_msp430_get_pins(void)
 	return (buf[3] << 8) | buf[2];
 }
 
+static int dm6444evm_mmc_get_cd(int module)
+{
+	int status = dm6444evm_msp430_get_pins();
+
+	return (status < 0) ? status : !(status & BIT(1));
+}
+
+static int dm6444evm_mmc_get_ro(int module)
+{
+	int status = dm6444evm_msp430_get_pins();
+
+	return (status < 0) ? status : status & BIT(6 + 8);
+}
+
+static struct davinci_mmc_config dm6446evm_mmc_config = {
+	.get_cd		= dm6444evm_mmc_get_cd,
+	.get_ro		= dm6444evm_mmc_get_ro,
+	.wires		= 4,
+	.version	= MMC_CTLR_VERSION_1
+};
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("dm6446evm_msp", 0x23),
@@ -598,7 +591,6 @@ static struct davinci_uart_config uart_config __initdata = {
 static void __init
 davinci_evm_map_io(void)
 {
-	davinci_map_common_io();
 	dm644x_init();
 }
 
@@ -639,6 +631,7 @@ static int davinci_phy_fixup(struct phy_device *phydev)
 static __init void davinci_evm_init(void)
 {
 	struct clk *aemif_clk;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_enable(aemif_clk);
@@ -671,8 +664,13 @@ static __init void davinci_evm_init(void)
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
 
+	davinci_setup_mmc(0, &dm6446evm_mmc_config);
+
 	davinci_serial_init(&uart_config);
 
+	soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
+
 	/* Register the fixup for PHY on DaVinci */
 	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
 					davinci_phy_fixup);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
new file mode 100644
index 00000000000..e17de635262
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -0,0 +1,262 @@
+/*
+ * TI DaVinci DM646X EVM board
+ *
+ * Derived from: arch/arm/mach-davinci/board-evm.c
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * (C) 2007-2008, MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/root_dev.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/etherdevice.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm646x.h>
+#include <mach/common.h>
+#include <mach/psc.h>
+#include <mach/serial.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
+
+#define DM646X_EVM_PHY_MASK		(0x2)
+#define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+/* LEDS */
+
+static struct gpio_led evm_leds[] = {
+	{ .name = "DS1", .active_low = 1, },
+	{ .name = "DS2", .active_low = 1, },
+	{ .name = "DS3", .active_low = 1, },
+	{ .name = "DS4", .active_low = 1, },
+};
+
+static __initconst struct gpio_led_platform_data evm_led_data = {
+	.num_leds = ARRAY_SIZE(evm_leds),
+	.leds     = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int evm_led_setup(struct i2c_client *client, int gpio,
+			unsigned int ngpio, void *c)
+{
+	struct gpio_led *leds = evm_leds;
+	int status;
+
+	while (ngpio--) {
+		leds->gpio = gpio++;
+		leds++;
+	};
+
+	evm_led_dev = platform_device_alloc("leds-gpio", 0);
+	platform_device_add_data(evm_led_dev, &evm_led_data,
+				sizeof(evm_led_data));
+
+	evm_led_dev->dev.parent = &client->dev;
+	status = platform_device_add(evm_led_dev);
+	if (status < 0) {
+		platform_device_put(evm_led_dev);
+		evm_led_dev = NULL;
+	}
+	return status;
+}
+
+static int evm_led_teardown(struct i2c_client *client, int gpio,
+				unsigned ngpio, void *c)
+{
+	if (evm_led_dev) {
+		platform_device_unregister(evm_led_dev);
+		evm_led_dev = NULL;
+	}
+	return 0;
+}
+
+static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
+
+static int evm_sw_setup(struct i2c_client *client, int gpio,
+			unsigned ngpio, void *c)
+{
+	int status;
+	int i;
+	char label[10];
+
+	for (i = 0; i < 4; ++i) {
+		snprintf(label, 10, "user_sw%d", i);
+		status = gpio_request(gpio, label);
+		if (status)
+			goto out_free;
+		evm_sw_gpio[i] = gpio++;
+
+		status = gpio_direction_input(evm_sw_gpio[i]);
+		if (status) {
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+			goto out_free;
+		}
+
+		status = gpio_export(evm_sw_gpio[i], 0);
+		if (status) {
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+			goto out_free;
+		}
+	}
+	return status;
+out_free:
+	for (i = 0; i < 4; ++i) {
+		if (evm_sw_gpio[i] != -EINVAL) {
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+		}
+	}
+	return status;
+}
+
+static int evm_sw_teardown(struct i2c_client *client, int gpio,
+			unsigned ngpio, void *c)
+{
+	int i;
+
+	for (i = 0; i < 4; ++i) {
+		if (evm_sw_gpio[i] != -EINVAL) {
+			gpio_unexport(evm_sw_gpio[i]);
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static int evm_pcf_setup(struct i2c_client *client, int gpio,
+			unsigned int ngpio, void *c)
+{
+	int status;
+
+	if (ngpio < 8)
+		return -EINVAL;
+
+	status = evm_sw_setup(client, gpio, 4, c);
+	if (status)
+		return status;
+
+	return evm_led_setup(client, gpio+4, 4, c);
+}
+
+static int evm_pcf_teardown(struct i2c_client *client, int gpio,
+			unsigned int ngpio, void *c)
+{
+	BUG_ON(ngpio < 8);
+
+	evm_sw_teardown(client, gpio, 4, c);
+	evm_led_teardown(client, gpio+4, 4, c);
+
+	return 0;
+}
+
+static struct pcf857x_platform_data pcf_data = {
+	.gpio_base	= DAVINCI_N_GPIO+1,
+	.setup		= evm_pcf_setup,
+	.teardown	= evm_pcf_teardown,
+};
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ *  - 0x7f00, 6 bytes Ethernet Address
+ *  - ... newer boards may have more
+ */
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len       = (256*1024) / 8,
+	.page_size      = 64,
+	.flags          = AT24_FLAG_ADDR16,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data  = &eeprom_info,
+	},
+	{
+		I2C_BOARD_INFO("pcf8574a", 0x38),
+		.platform_data	= &pcf_data,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq       = 100 /* kHz */,
+	.bus_delay      = 0 /* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static void __init davinci_map_io(void)
+{
+	dm646x_init();
+}
+
+static __init void evm_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
+}
+
+static __init void davinci_dm646x_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io       = davinci_map_io,
+	.init_irq     = davinci_dm646x_evm_irq_init,
+	.timer        = &davinci_timer,
+	.init_machine = evm_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
new file mode 100644
index 00000000000..748a8e48541
--- /dev/null
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -0,0 +1,189 @@
+/*
+ * Lyrtech SFFSDR board support.
+ *
+ * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * Based on DV-EVM platform, original copyright follows:
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/etherdevice.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm644x.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/common.h>
+
+#define SFFSDR_PHY_MASK		(0x2)
+#define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
+
+struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
+	/* U-Boot Environment: Block 0
+	 * UBL:                Block 1
+	 * U-Boot:             Blocks 6-7 (256 kb)
+	 * Integrity Kernel:   Blocks 8-31 (3 Mb)
+	 * Integrity Data:     Blocks 100-END
+	 */
+	{
+		.name		= "Linux Kernel",
+		.offset		= 32 * SZ_128K,
+		.size		= 16 * SZ_128K, /* 2 Mb */
+		.mask_flags	= MTD_WRITEABLE, /* Force read-only */
+	},
+	{
+		.name		= "Linux ROOT",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 256 * SZ_128K, /* 32 Mb */
+		.mask_flags	= 0, /* R/W */
+	},
+};
+
+static struct flash_platform_data davinci_sffsdr_nandflash_data = {
+	.parts		= davinci_sffsdr_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
+};
+
+static struct resource davinci_sffsdr_nandflash_resource[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_sffsdr_nandflash_device = {
+	.name		= "davinci_nand", /* Name of driver */
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &davinci_sffsdr_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
+	.resource	= davinci_sffsdr_nandflash_resource,
+};
+
+static struct emac_platform_data sffsdr_emac_pdata = {
+	.phy_mask	= SFFSDR_PHY_MASK,
+	.mdio_max_freq	= SFFSDR_MDIO_FREQUENCY,
+};
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len	= (64*1024) / 8,
+	.page_size	= 32,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("24lc64", 0x50),
+		.platform_data	= &eeprom_info,
+	},
+	/* Other I2C devices:
+	 * MSP430,  addr 0x23 (not used)
+	 * PCA9543, addr 0x70 (setup done by U-Boot)
+	 * ADS7828, addr 0x48 (ADC for voltage monitoring.)
+	 */
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 20 /* kHz */,
+	.bus_delay	= 100 /* usec */,
+};
+
+static void __init sffsdr_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *davinci_sffsdr_devices[] __initdata = {
+	&davinci_sffsdr_nandflash_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_sffsdr_map_io(void)
+{
+	dm644x_init();
+}
+
+static __init void davinci_sffsdr_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	platform_add_devices(davinci_sffsdr_devices,
+			     ARRAY_SIZE(davinci_sffsdr_devices));
+	sffsdr_init_i2c();
+	davinci_serial_init(&uart_config);
+	soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
+	setup_usb(0, 0); /* We support only peripheral mode. */
+
+	/* mux VLYNQ pins */
+	davinci_cfg_reg(DM644X_VLYNQEN);
+	davinci_cfg_reg(DM644X_VLYNQWD);
+}
+
+static __init void davinci_sffsdr_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
+	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
+	.map_io	      = davinci_sffsdr_map_io,
+	.init_irq     = davinci_sffsdr_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = davinci_sffsdr_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index f0baaa15a57..39bf321d70a 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -42,7 +42,8 @@ static void __clk_enable(struct clk *clk)
 	if (clk->parent)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
+		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+				clk->lpsc, 1);
 }
 
 static void __clk_disable(struct clk *clk)
@@ -50,7 +51,8 @@ static void __clk_disable(struct clk *clk)
 	if (WARN_ON(clk->usecount == 0))
 		return;
 	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
-		davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+				clk->lpsc, 0);
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
@@ -164,11 +166,11 @@ static int __init clk_disable_unused(void)
 			continue;
 
 		/* ignore if in Disabled or SwRstDisable states */
-		if (!davinci_psc_is_clk_active(ck->lpsc))
+		if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
 			continue;
 
 		pr_info("Clocks: disable unused %s\n", ck->name);
-		davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
+		davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
 	}
 	spin_unlock_irq(&clockfw_lock);
 
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 35736ec202f..27233cb4a2f 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -67,6 +67,7 @@ struct clk {
 	u8			usecount;
 	u8			flags;
 	u8			lpsc;
+	u8			psc_ctlr;
 	struct clk              *parent;
 	struct pll_data         *pll_data;
 	u32                     div_reg;
@@ -93,4 +94,7 @@ struct davinci_clk {
 	}
 
 int davinci_clk_init(struct davinci_clk *clocks);
+
+extern struct platform_device davinci_wdt_device;
+
 #endif
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
new file mode 100644
index 00000000000..61ede19c6b5
--- /dev/null
+++ b/arch/arm/mach-davinci/common.c
@@ -0,0 +1,108 @@
+/*
+ * Code commons to all DaVinci SoCs.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/etherdevice.h>
+
+#include <asm/tlb.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/cputype.h>
+#include <mach/emac.h>
+
+#include "clock.h"
+
+struct davinci_soc_info davinci_soc_info;
+EXPORT_SYMBOL(davinci_soc_info);
+
+void __iomem *davinci_intc_base;
+int davinci_intc_type;
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+{
+	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
+	off_t offset = (off_t)context;
+
+	/* Read MAC addr from EEPROM */
+	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
+}
+
+static struct davinci_id * __init davinci_get_id(u32 jtag_id)
+{
+	int i;
+	struct davinci_id *dip;
+	u8 variant = (jtag_id & 0xf0000000) >> 28;
+	u16 part_no = (jtag_id & 0x0ffff000) >> 12;
+
+	for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num;
+			i++, dip++)
+		/* Don't care about the manufacturer right now */
+		if ((dip->part_no == part_no) && (dip->variant == variant))
+			return dip;
+
+	return NULL;
+}
+
+void __init davinci_common_init(struct davinci_soc_info *soc_info)
+{
+	int ret;
+	struct davinci_id *dip;
+
+	if (!soc_info) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info));
+
+	if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0))
+		iotable_init(davinci_soc_info.io_desc,
+				davinci_soc_info.io_desc_num);
+
+	/*
+	 * Normally devicemaps_init() would flush caches and tlb after
+	 * mdesc->map_io(), but we must also do it here because of the CPU
+	 * revision check below.
+	 */
+	local_flush_tlb_all();
+	flush_cache_all();
+
+	/*
+	 * We want to check CPU revision early for cpu_is_xxxx() macros.
+	 * IO space mapping must be initialized before we can do that.
+	 */
+	davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base);
+
+	dip = davinci_get_id(davinci_soc_info.jtag_id);
+	if (!dip) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	davinci_soc_info.cpu_id = dip->cpu_id;
+	pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant);
+
+	if (davinci_soc_info.cpu_clks) {
+		ret = davinci_clk_init(davinci_soc_info.cpu_clks);
+
+		if (ret != 0)
+			goto err;
+	}
+
+	davinci_intc_base = davinci_soc_info.intc_base;
+	davinci_intc_type = davinci_soc_info.intc_type;
+	return;
+
+err:
+	pr_err("davinci_common_init: SoC Initialization failed\n");
+}
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
new file mode 100644
index 00000000000..96c8e97a7de
--- /dev/null
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -0,0 +1,161 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) driver
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/cp_intc.h>
+
+static void __iomem *cp_intc_base;
+
+static inline unsigned int cp_intc_read(unsigned offset)
+{
+	return __raw_readl(cp_intc_base + offset);
+}
+
+static inline void cp_intc_write(unsigned long value, unsigned offset)
+{
+	__raw_writel(value, cp_intc_base + offset);
+}
+
+static void cp_intc_ack_irq(unsigned int irq)
+{
+	cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR);
+}
+
+/* Disable interrupt */
+static void cp_intc_mask_irq(unsigned int irq)
+{
+	/* XXX don't know why we need to disable nIRQ here... */
+	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR);
+	cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR);
+	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+}
+
+/* Enable interrupt */
+static void cp_intc_unmask_irq(unsigned int irq)
+{
+	cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET);
+}
+
+static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
+{
+	unsigned reg		= BIT_WORD(irq);
+	unsigned mask		= BIT_MASK(irq);
+	unsigned polarity	= cp_intc_read(CP_INTC_SYS_POLARITY(reg));
+	unsigned type		= cp_intc_read(CP_INTC_SYS_TYPE(reg));
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_RISING:
+		polarity |= mask;
+		type |= mask;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		polarity &= ~mask;
+		type |= mask;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		polarity |= mask;
+		type &= ~mask;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		polarity &= ~mask;
+		type &= ~mask;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg));
+	cp_intc_write(type, CP_INTC_SYS_TYPE(reg));
+
+	return 0;
+}
+
+static struct irq_chip cp_intc_irq_chip = {
+	.name		= "cp_intc",
+	.ack		= cp_intc_ack_irq,
+	.mask		= cp_intc_mask_irq,
+	.unmask		= cp_intc_unmask_irq,
+	.set_type	= cp_intc_set_irq_type,
+};
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+			 u8 *irq_prio)
+{
+	unsigned num_reg	= BITS_TO_LONGS(num_irq);
+	int i;
+
+	cp_intc_base = base;
+
+	cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
+
+	/* Disable all host interrupts */
+	cp_intc_write(0, CP_INTC_HOST_ENABLE(0));
+
+	/* Disable system interrupts */
+	for (i = 0; i < num_reg; i++)
+		cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i));
+
+	/* Set to normal mode, no nesting, no priority hold */
+	cp_intc_write(0, CP_INTC_CTRL);
+	cp_intc_write(0, CP_INTC_HOST_CTRL);
+
+	/* Clear system interrupt status */
+	for (i = 0; i < num_reg; i++)
+		cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i));
+
+	/* Enable nIRQ (what about nFIQ?) */
+	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+
+	/*
+	 * Priority is determined by host channel: lower channel number has
+	 * higher priority i.e. channel 0 has highest priority and channel 31
+	 * had the lowest priority.
+	 */
+	num_reg = (num_irq + 3) >> 2;	/* 4 channels per register */
+	if (irq_prio) {
+		unsigned j, k;
+		u32 val;
+
+		for (k = i = 0; i < num_reg; i++) {
+			for (val = j = 0; j < 4; j++, k++) {
+				val >>= 8;
+				if (k < num_irq)
+					val |= irq_prio[k] << 24;
+			}
+
+			cp_intc_write(val, CP_INTC_CHAN_MAP(i));
+		}
+	} else	{
+		/*
+		 * Default everything to channel 15 if priority not specified.
+		 * Note that channel 0-1 are mapped to nFIQ and channels 2-31
+		 * are mapped to nIRQ.
+		 */
+		for (i = 0; i < num_reg; i++)
+			cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
+	}
+
+	/* Set up genirq dispatching for cp_intc */
+	for (i = 0; i < num_irq; i++) {
+		set_irq_chip(i, &cp_intc_irq_chip);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+		set_irq_handler(i, handle_edge_irq);
+	}
+
+	/* Enable global interrupt */
+	cp_intc_write(1, CP_INTC_GLOBAL_ENABLE);
+}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index a31370b93dd..de16f347566 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -23,8 +23,14 @@
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
+#include <mach/edma.h>
+#include <mach/mmc.h>
+#include <mach/time.h>
 
 #define DAVINCI_I2C_BASE	     0x01C21000
+#define DAVINCI_MMCSD0_BASE	     0x01E10000
+#define DM355_MMCSD0_BASE	     0x01E11000
+#define DM355_MMCSD1_BASE	     0x01E00000
 
 static struct resource i2c_resources[] = {
 	{
@@ -54,3 +60,208 @@ void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
 	(void) platform_device_register(&davinci_i2c_device);
 }
 
+#if	defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
+
+static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd0_resources[] = {
+	{
+		/* different on dm355 */
+		.start = DAVINCI_MMCSD0_BASE,
+		.end   = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/* IRQs:  MMC/SD, then SDIO */
+	{
+		.start = IRQ_MMCINT,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		/* different on dm355 */
+		.start = IRQ_SDIOINT,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* DMA channels: RX, then TX */
+	{
+		.start = DAVINCI_DMA_MMCRXEVT,
+		.flags = IORESOURCE_DMA,
+	}, {
+		.start = DAVINCI_DMA_MMCTXEVT,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device davinci_mmcsd0_device = {
+	.name = "davinci_mmc",
+	.id = 0,
+	.dev = {
+		.dma_mask = &mmcsd0_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(mmcsd0_resources),
+	.resource = mmcsd0_resources,
+};
+
+static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd1_resources[] = {
+	{
+		.start = DM355_MMCSD1_BASE,
+		.end   = DM355_MMCSD1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/* IRQs:  MMC/SD, then SDIO */
+	{
+		.start = IRQ_DM355_MMCINT1,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DM355_SDIOINT1,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* DMA channels: RX, then TX */
+	{
+		.start = 30,	/* rx */
+		.flags = IORESOURCE_DMA,
+	}, {
+		.start = 31,	/* tx */
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device davinci_mmcsd1_device = {
+	.name = "davinci_mmc",
+	.id = 1,
+	.dev = {
+		.dma_mask = &mmcsd1_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(mmcsd1_resources),
+	.resource = mmcsd1_resources,
+};
+
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+	struct platform_device	*pdev = NULL;
+
+	if (WARN_ON(cpu_is_davinci_dm646x()))
+		return;
+
+	/* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
+	 * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
+	 *
+	 * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
+	 * not handled right here ...
+	 */
+	switch (module) {
+	case 1:
+		if (!cpu_is_davinci_dm355())
+			break;
+
+		/* REVISIT we may not need all these pins if e.g. this
+		 * is a hard-wired SDIO device...
+		 */
+		davinci_cfg_reg(DM355_SD1_CMD);
+		davinci_cfg_reg(DM355_SD1_CLK);
+		davinci_cfg_reg(DM355_SD1_DATA0);
+		davinci_cfg_reg(DM355_SD1_DATA1);
+		davinci_cfg_reg(DM355_SD1_DATA2);
+		davinci_cfg_reg(DM355_SD1_DATA3);
+
+		pdev = &davinci_mmcsd1_device;
+		break;
+	case 0:
+		if (cpu_is_davinci_dm355()) {
+			mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
+			mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0;
+
+			/* expose all 6 MMC0 signals:  CLK, CMD, DATA[0..3] */
+			davinci_cfg_reg(DM355_MMCSD0);
+
+			/* enable RX EDMA */
+			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
+		}
+
+		else if (cpu_is_davinci_dm644x()) {
+			/* REVISIT: should this be in board-init code? */
+			void __iomem *base =
+				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+			/* Power-on 3.3V IO cells */
+			__raw_writel(0, base + DM64XX_VDD3P3V_PWDN);
+			/*Set up the pull regiter for MMC */
+			davinci_cfg_reg(DM644X_MSTK);
+		}
+
+		pdev = &davinci_mmcsd0_device;
+		break;
+	}
+
+	if (WARN_ON(!pdev))
+		return;
+
+	pdev->dev.platform_data = config;
+	platform_device_register(pdev);
+}
+
+#else
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct resource wdt_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device davinci_wdt_device = {
+	.name		= "watchdog",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(wdt_resources),
+	.resource	= wdt_resources,
+};
+
+static void davinci_init_wdt(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
+	wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
+
+	platform_device_register(&davinci_wdt_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
+struct davinci_timer_instance davinci_timer_instance[2] = {
+	{
+		.base		= IO_ADDRESS(DAVINCI_TIMER0_BASE),
+		.bottom_irq	= IRQ_TINT0_TINT12,
+		.top_irq	= IRQ_TINT0_TINT34,
+	},
+	{
+		.base		= IO_ADDRESS(DAVINCI_TIMER1_BASE),
+		.bottom_irq	= IRQ_TINT1_TINT12,
+		.top_irq	= IRQ_TINT1_TINT34,
+	},
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init davinci_init_devices(void)
+{
+	/* please keep these calls, and their implementations above,
+	 * in alphabetical order so they're easier to sort through.
+	 */
+	davinci_init_wdt();
+
+	return 0;
+}
+arch_initcall(davinci_init_devices);
+
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
new file mode 100644
index 00000000000..baaaf328de2
--- /dev/null
+++ b/arch/arm/mach-davinci/dm355.c
@@ -0,0 +1,730 @@
+/*
+ * TI DaVinci DM355 chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm355.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
+
+/*
+ * Device specific clocks
+ */
+#define DM355_REF_FREQ		24000000	/* 24 or 36 MHz */
+
+static struct pll_data pll1_data = {
+	.num       = 1,
+	.phys_base = DAVINCI_PLL1_BASE,
+	.flags     = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct pll_data pll2_data = {
+	.num       = 2,
+	.phys_base = DAVINCI_PLL2_BASE,
+	.flags     = PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	/* FIXME -- crystal rate is board-specific */
+	.rate = DM355_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name = "pll1",
+	.parent = &ref_clk,
+	.flags = CLK_PLL,
+	.pll_data = &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+	.name = "pll1_aux_clk",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name = "pll1_sysclk1",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name = "pll1_sysclk2",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name = "pll1_sysclk3",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name = "pll1_sysclk4",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name = "pll1_sysclkbp",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk vpss_dac_clk = {
+	.name = "vpss_dac",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM355_LPSC_VPSS_DAC,
+};
+
+static struct clk vpss_master_clk = {
+	.name = "vpss_master",
+	.parent = &pll1_sysclk4,
+	.lpsc = DAVINCI_LPSC_VPSSMSTR,
+	.flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+	.name = "vpss_slave",
+	.parent = &pll1_sysclk4,
+	.lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+
+static struct clk clkout1_clk = {
+	.name = "clkout1",
+	.parent = &pll1_aux_clk,
+	/* NOTE:  clkout1 can be externally gated by muxing GPIO-18 */
+};
+
+static struct clk clkout2_clk = {
+	.name = "clkout2",
+	.parent = &pll1_sysclkbp,
+};
+
+static struct clk pll2_clk = {
+	.name = "pll2",
+	.parent = &ref_clk,
+	.flags = CLK_PLL,
+	.pll_data = &pll2_data,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name = "pll2_sysclk1",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclkbp = {
+	.name = "pll2_sysclkbp",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk clkout3_clk = {
+	.name = "clkout3",
+	.parent = &pll2_sysclkbp,
+	/* NOTE:  clkout3 can be externally gated by muxing GPIO-16 */
+};
+
+static struct clk arm_clk = {
+	.name = "arm_clk",
+	.parent = &pll1_sysclk1,
+	.lpsc = DAVINCI_LPSC_ARM,
+	.flags = ALWAYS_ENABLED,
+};
+
+/*
+ * NOT LISTED below, and not touched by Linux
+ *   - in SyncReset state by default
+ *	.lpsc = DAVINCI_LPSC_TPCC,
+ *	.lpsc = DAVINCI_LPSC_TPTC0,
+ *	.lpsc = DAVINCI_LPSC_TPTC1,
+ *	.lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
+ *	.lpsc = DAVINCI_LPSC_MEMSTICK,
+ *   - in Enabled state by default
+ *	.lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
+ *	.lpsc = DAVINCI_LPSC_SCR2,	// "bus"
+ *	.lpsc = DAVINCI_LPSC_SCR3,	// "bus"
+ *	.lpsc = DAVINCI_LPSC_SCR4,	// "bus"
+ *	.lpsc = DAVINCI_LPSC_CROSSBAR,	// "emulation"
+ *	.lpsc = DAVINCI_LPSC_CFG27,	// "test"
+ *	.lpsc = DAVINCI_LPSC_CFG3,	// "test"
+ *	.lpsc = DAVINCI_LPSC_CFG5,	// "test"
+ */
+
+static struct clk mjcp_clk = {
+	.name = "mjcp",
+	.parent = &pll1_sysclk1,
+	.lpsc = DAVINCI_LPSC_IMCOP,
+};
+
+static struct clk uart0_clk = {
+	.name = "uart0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name = "uart1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+	.name = "uart2",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+	.name = "i2c",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk asp0_clk = {
+	.name = "asp0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk asp1_clk = {
+	.name = "asp1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_McBSP1,
+};
+
+static struct clk mmcsd0_clk = {
+	.name = "mmcsd0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+	.name = "mmcsd1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+	.name = "spi0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+	.name = "spi1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+	.name = "spi2",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_SPI2,
+};
+
+static struct clk gpio_clk = {
+	.name = "gpio",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+	.name = "aemif",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+	.name = "pwm0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+	.name = "pwm1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+	.name = "pwm2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+	.name = "pwm3",
+	.parent = &pll1_aux_clk,
+	.lpsc = DM355_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+	.name = "timer0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name = "timer1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name = "timer2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER2,
+	.usecount = 1,              /* REVISIT: why cant' this be disabled? */
+};
+
+static struct clk timer3_clk = {
+	.name = "timer3",
+	.parent = &pll1_aux_clk,
+	.lpsc = DM355_LPSC_TIMER3,
+};
+
+static struct clk rto_clk = {
+	.name = "rto",
+	.parent = &pll1_aux_clk,
+	.lpsc = DM355_LPSC_RTO,
+};
+
+static struct clk usb_clk = {
+	.name = "usb",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct davinci_clk dm355_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+	CLK(NULL, "vpss_dac", &vpss_dac_clk),
+	CLK(NULL, "vpss_master", &vpss_master_clk),
+	CLK(NULL, "vpss_slave", &vpss_slave_clk),
+	CLK(NULL, "clkout1", &clkout1_clk),
+	CLK(NULL, "clkout2", &clkout2_clk),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+	CLK(NULL, "clkout3", &clkout3_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "mjcp", &mjcp_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK(NULL, "uart2", &uart2_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK("soc-audio.0", NULL, &asp0_clk),
+	CLK("soc-audio.1", NULL, &asp1_clk),
+	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+	CLK(NULL, "spi0", &spi0_clk),
+	CLK(NULL, "spi1", &spi1_clk),
+	CLK(NULL, "spi2", &spi2_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "pwm2", &pwm2_clk),
+	CLK(NULL, "pwm3", &pwm3_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, "timer3", &timer3_clk),
+	CLK(NULL, "rto", &rto_clk),
+	CLK(NULL, "usb", &usb_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource dm355_spi0_resources[] = {
+	{
+		.start = 0x01c66000,
+		.end   = 0x01c667ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_DM355_SPINT0_1,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* Not yet used, so not included:
+	 * IORESOURCE_IRQ:
+	 *  - IRQ_DM355_SPINT0_0
+	 * IORESOURCE_DMA:
+	 *  - DAVINCI_DMA_SPI_SPIX
+	 *  - DAVINCI_DMA_SPI_SPIR
+	 */
+};
+
+static struct platform_device dm355_spi0_device = {
+	.name = "spi_davinci",
+	.id = 0,
+	.dev = {
+		.dma_mask = &dm355_spi0_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(dm355_spi0_resources),
+	.resource = dm355_spi0_resources,
+};
+
+void __init dm355_init_spi0(unsigned chipselect_mask,
+		struct spi_board_info *info, unsigned len)
+{
+	/* for now, assume we need MISO */
+	davinci_cfg_reg(DM355_SPI0_SDI);
+
+	/* not all slaves will be wired up */
+	if (chipselect_mask & BIT(0))
+		davinci_cfg_reg(DM355_SPI0_SDENA0);
+	if (chipselect_mask & BIT(1))
+		davinci_cfg_reg(DM355_SPI0_SDENA1);
+
+	spi_register_board_info(info, len);
+
+	platform_device_register(&dm355_spi0_device);
+}
+
+/*----------------------------------------------------------------------*/
+
+#define PINMUX0		0x00
+#define PINMUX1		0x04
+#define PINMUX2		0x08
+#define PINMUX3		0x0c
+#define PINMUX4		0x10
+#define INTMUX		0x18
+#define EVTMUX		0x1c
+
+/*
+ * Device specific mux setup
+ *
+ *	soc	description	mux  mode   mode  mux	 dbg
+ *				reg  offset mask  mode
+ */
+static const struct mux_config dm355_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM355,	MMCSD0,		4,   2,     1,	  0,	 false)
+
+MUX_CFG(DM355,	SD1_CLK,	3,   6,     1,	  1,	 false)
+MUX_CFG(DM355,	SD1_CMD,	3,   7,     1,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA3,	3,   8,     3,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA2,	3,   10,    3,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA1,	3,   12,    3,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA0,	3,   14,    3,	  1,	 false)
+
+MUX_CFG(DM355,	I2C_SDA,	3,   19,    1,	  1,	 false)
+MUX_CFG(DM355,	I2C_SCL,	3,   20,    1,	  1,	 false)
+
+MUX_CFG(DM355,	MCBSP0_BDX,	3,   0,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_X,	3,   1,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_BFSX,	3,   2,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_BDR,	3,   3,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_R,	3,   4,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_BFSR,	3,   5,     1,	  1,	 false)
+
+MUX_CFG(DM355,	SPI0_SDI,	4,   1,     1,    0,	 false)
+MUX_CFG(DM355,	SPI0_SDENA0,	4,   0,     1,    0,	 false)
+MUX_CFG(DM355,	SPI0_SDENA1,	3,   28,    1,    1,	 false)
+
+INT_CFG(DM355,  INT_EDMA_CC,	      2,    1,    1,     false)
+INT_CFG(DM355,  INT_EDMA_TC0_ERR,     3,    1,    1,     false)
+INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
+
+EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
+EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
+EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
+#endif
+};
+
+static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_DM355_CCDC_VDINT0]		= 2,
+	[IRQ_DM355_CCDC_VDINT1]		= 6,
+	[IRQ_DM355_CCDC_VDINT2]		= 6,
+	[IRQ_DM355_IPIPE_HST]		= 6,
+	[IRQ_DM355_H3AINT]		= 6,
+	[IRQ_DM355_IPIPE_SDR]		= 6,
+	[IRQ_DM355_IPIPEIFINT]		= 6,
+	[IRQ_DM355_OSDINT]		= 7,
+	[IRQ_DM355_VENCINT]		= 6,
+	[IRQ_ASQINT]			= 6,
+	[IRQ_IMXINT]			= 6,
+	[IRQ_USBINT]			= 4,
+	[IRQ_DM355_RTOINT]		= 4,
+	[IRQ_DM355_UARTINT2]		= 7,
+	[IRQ_DM355_TINT6]		= 7,
+	[IRQ_CCINT0]			= 5,	/* dma */
+	[IRQ_CCERRINT]			= 5,	/* dma */
+	[IRQ_TCERRINT0]			= 5,	/* dma */
+	[IRQ_TCERRINT]			= 5,	/* dma */
+	[IRQ_DM355_SPINT2_1]		= 7,
+	[IRQ_DM355_TINT7]		= 4,
+	[IRQ_DM355_SDIOINT0]		= 7,
+	[IRQ_MBXINT]			= 7,
+	[IRQ_MBRINT]			= 7,
+	[IRQ_MMCINT]			= 7,
+	[IRQ_DM355_MMCINT1]		= 7,
+	[IRQ_DM355_PWMINT3]		= 7,
+	[IRQ_DDRINT]			= 7,
+	[IRQ_AEMIFINT]			= 7,
+	[IRQ_DM355_SDIOINT1]		= 4,
+	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
+	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
+	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
+	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
+	[IRQ_PWMINT0]			= 7,
+	[IRQ_PWMINT1]			= 7,
+	[IRQ_PWMINT2]			= 7,
+	[IRQ_I2C]			= 3,
+	[IRQ_UARTINT0]			= 3,
+	[IRQ_UARTINT1]			= 3,
+	[IRQ_DM355_SPINT0_0]		= 3,
+	[IRQ_DM355_SPINT0_1]		= 3,
+	[IRQ_DM355_GPIO0]		= 3,
+	[IRQ_DM355_GPIO1]		= 7,
+	[IRQ_DM355_GPIO2]		= 4,
+	[IRQ_DM355_GPIO3]		= 4,
+	[IRQ_DM355_GPIO4]		= 7,
+	[IRQ_DM355_GPIO5]		= 7,
+	[IRQ_DM355_GPIO6]		= 7,
+	[IRQ_DM355_GPIO7]		= 7,
+	[IRQ_DM355_GPIO8]		= 7,
+	[IRQ_DM355_GPIO9]		= 7,
+	[IRQ_DM355_GPIOBNK0]		= 7,
+	[IRQ_DM355_GPIOBNK1]		= 7,
+	[IRQ_DM355_GPIOBNK2]		= 7,
+	[IRQ_DM355_GPIOBNK3]		= 7,
+	[IRQ_DM355_GPIOBNK4]		= 7,
+	[IRQ_DM355_GPIOBNK5]		= 7,
+	[IRQ_DM355_GPIOBNK6]		= 7,
+	[IRQ_COMMTX]			= 7,
+	[IRQ_COMMRX]			= 7,
+	[IRQ_EMUINT]			= 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm355_no_event[] = {
+	12, 13, 24, 56, 57,
+	58, 59, 60, 61, 62,
+	63,
+	-1
+};
+
+static struct edma_soc_info dm355_edma_info = {
+	.n_channel	= 64,
+	.n_region	= 4,
+	.n_slot		= 128,
+	.n_tc		= 2,
+	.noevent	= dma_chan_dm355_no_event,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using (or muxing) TC*_ERR */
+};
+
+static struct platform_device dm355_edma_device = {
+	.name			= "edma",
+	.id			= -1,
+	.dev.platform_data	= &dm355_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm355_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00010000),
+		.length		= SZ_32K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm355_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb73b,
+		.manufacturer	= 0x00f,
+		.cpu_id		= DAVINCI_CPU_ID_DM355,
+		.name		= "dm355",
+	},
+};
+
+static void __iomem *dm355_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm355_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm355_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DM355_UART2_BASE,
+		.irq		= IRQ_DM355_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm355_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm355_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm355 = {
+	.io_desc		= dm355_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm355_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm355_ids,
+	.ids_num		= ARRAY_SIZE(dm355_ids),
+	.cpu_clks		= dm355_clks,
+	.psc_bases		= dm355_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm355_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm355_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm355_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios		= dm355_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm355_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 104,
+	.gpio_irq		= IRQ_DM355_GPIOBNK0,
+	.serial_dev		= &dm355_serial_device,
+	.sram_dma		= 0x00010000,
+	.sram_len		= SZ_32K,
+};
+
+void __init dm355_init(void)
+{
+	davinci_common_init(&davinci_soc_info_dm355);
+}
+
+static int __init dm355_init_devices(void)
+{
+	if (!cpu_is_davinci_dm355())
+		return 0;
+
+	davinci_cfg_reg(DM355_INT_EDMA_CC);
+	platform_device_register(&dm355_edma_device);
+	return 0;
+}
+postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d428ef192ea..fb5449b3c97 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -11,7 +11,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/serial_8250.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
 
 #include <mach/dm644x.h>
 #include <mach/clock.h>
@@ -20,6 +24,9 @@
 #include <mach/irqs.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -312,7 +319,14 @@ struct davinci_clk dm644x_clks[] = {
 	CLK(NULL, NULL, NULL),
 };
 
-#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+static struct emac_platform_data dm644x_emac_pdata = {
+	.ctrl_reg_offset	= DM644X_EMAC_CNTRL_OFFSET,
+	.ctrl_mod_reg_offset	= DM644X_EMAC_CNTRL_MOD_OFFSET,
+	.ctrl_ram_offset	= DM644X_EMAC_CNTRL_RAM_OFFSET,
+	.mdio_reg_offset	= DM644X_EMAC_MDIO_OFFSET,
+	.ctrl_ram_size		= DM644X_EMAC_CNTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_1,
+};
 
 static struct resource dm644x_emac_resources[] = {
 	{
@@ -330,11 +344,15 @@ static struct resource dm644x_emac_resources[] = {
 static struct platform_device dm644x_emac_device = {
        .name		= "davinci_emac",
        .id		= 1,
+       .dev = {
+	       .platform_data	= &dm644x_emac_pdata,
+       },
        .num_resources	= ARRAY_SIZE(dm644x_emac_resources),
        .resource	= dm644x_emac_resources,
 };
 
-#endif
+#define PINMUX0		0x00
+#define PINMUX1		0x04
 
 /*
  * Device specific mux setup
@@ -343,6 +361,7 @@ static struct platform_device dm644x_emac_device = {
  *				reg  offset mask  mode
  */
 static const struct mux_config dm644x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
 MUX_CFG(DM644X, HDIREN,		0,   16,    1,	  1,	 true)
 MUX_CFG(DM644X, ATAEN,		0,   17,    1,	  1,	 true)
 MUX_CFG(DM644X, ATAEN_DISABLE,	0,   17,    1,	  0,	 true)
@@ -383,8 +402,76 @@ MUX_CFG(DM644X, RGB666,		0,   22,    1,	  1,	 true)
 
 MUX_CFG(DM644X, LOEEN,		0,   24,    1,	  1,	 true)
 MUX_CFG(DM644X, LFLDEN,		0,   25,    1,	  1,	 false)
+#endif
 };
 
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_VDINT0]		= 2,
+	[IRQ_VDINT1]		= 6,
+	[IRQ_VDINT2]		= 6,
+	[IRQ_HISTINT]		= 6,
+	[IRQ_H3AINT]		= 6,
+	[IRQ_PRVUINT]		= 6,
+	[IRQ_RSZINT]		= 6,
+	[7]			= 7,
+	[IRQ_VENCINT]		= 6,
+	[IRQ_ASQINT]		= 6,
+	[IRQ_IMXINT]		= 6,
+	[IRQ_VLCDINT]		= 6,
+	[IRQ_USBINT]		= 4,
+	[IRQ_EMACINT]		= 4,
+	[14]			= 7,
+	[15]			= 7,
+	[IRQ_CCINT0]		= 5,	/* dma */
+	[IRQ_CCERRINT]		= 5,	/* dma */
+	[IRQ_TCERRINT0]		= 5,	/* dma */
+	[IRQ_TCERRINT]		= 5,	/* dma */
+	[IRQ_PSCIN]		= 7,
+	[21]			= 7,
+	[IRQ_IDE]		= 4,
+	[23]			= 7,
+	[IRQ_MBXINT]		= 7,
+	[IRQ_MBRINT]		= 7,
+	[IRQ_MMCINT]		= 7,
+	[IRQ_SDIOINT]		= 7,
+	[28]			= 7,
+	[IRQ_DDRINT]		= 7,
+	[IRQ_AEMIFINT]		= 7,
+	[IRQ_VLQINT]		= 4,
+	[IRQ_TINT0_TINT12]	= 2,	/* clockevent */
+	[IRQ_TINT0_TINT34]	= 2,	/* clocksource */
+	[IRQ_TINT1_TINT12]	= 7,	/* DSP timer */
+	[IRQ_TINT1_TINT34]	= 7,	/* system tick */
+	[IRQ_PWMINT0]		= 7,
+	[IRQ_PWMINT1]		= 7,
+	[IRQ_PWMINT2]		= 7,
+	[IRQ_I2C]		= 3,
+	[IRQ_UARTINT0]		= 3,
+	[IRQ_UARTINT1]		= 3,
+	[IRQ_UARTINT2]		= 3,
+	[IRQ_SPINT0]		= 3,
+	[IRQ_SPINT1]		= 3,
+	[45]			= 7,
+	[IRQ_DSP2ARM0]		= 4,
+	[IRQ_DSP2ARM1]		= 4,
+	[IRQ_GPIO0]		= 7,
+	[IRQ_GPIO1]		= 7,
+	[IRQ_GPIO2]		= 7,
+	[IRQ_GPIO3]		= 7,
+	[IRQ_GPIO4]		= 7,
+	[IRQ_GPIO5]		= 7,
+	[IRQ_GPIO6]		= 7,
+	[IRQ_GPIO7]		= 7,
+	[IRQ_GPIOBNK0]		= 7,
+	[IRQ_GPIOBNK1]		= 7,
+	[IRQ_GPIOBNK2]		= 7,
+	[IRQ_GPIOBNK3]		= 7,
+	[IRQ_GPIOBNK4]		= 7,
+	[IRQ_COMMTX]		= 7,
+	[IRQ_COMMRX]		= 7,
+	[IRQ_EMUINT]		= 7,
+};
 
 /*----------------------------------------------------------------------*/
 
@@ -444,10 +531,118 @@ static struct platform_device dm644x_edma_device = {
 };
 
 /*----------------------------------------------------------------------*/
+
+static struct map_desc dm644x_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00008000),
+		.length		= SZ_16K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm644x_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb700,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6446,
+		.name		= "dm6446",
+	},
+};
+
+static void __iomem *dm644x_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm644x_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART2_BASE,
+		.irq		= IRQ_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm644x_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm644x_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm644x = {
+	.io_desc		= dm644x_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm644x_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm644x_ids,
+	.ids_num		= ARRAY_SIZE(dm644x_ids),
+	.cpu_clks		= dm644x_clks,
+	.psc_bases		= dm644x_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm644x_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm644x_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm644x_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios 	= dm644x_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm644x_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 71,
+	.gpio_irq		= IRQ_GPIOBNK0,
+	.serial_dev		= &dm644x_serial_device,
+	.emac_pdata		= &dm644x_emac_pdata,
+	.sram_dma		= 0x00008000,
+	.sram_len		= SZ_16K,
+};
+
 void __init dm644x_init(void)
 {
-	davinci_clk_init(dm644x_clks);
-	davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+	davinci_common_init(&davinci_soc_info_dm644x);
 }
 
 static int __init dm644x_init_devices(void)
@@ -456,6 +651,7 @@ static int __init dm644x_init_devices(void)
 		return 0;
 
 	platform_device_register(&dm644x_edma_device);
+	platform_device_register(&dm644x_emac_device);
 	return 0;
 }
 postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
new file mode 100644
index 00000000000..334f0711e0f
--- /dev/null
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -0,0 +1,636 @@
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm646x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM646X_REF_FREQ		27000000
+#define DM646X_AUX_FREQ		24000000
+
+static struct pll_data pll1_data = {
+	.num       = 1,
+	.phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+	.num       = 2,
+	.phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	.rate = DM646X_REF_FREQ,
+};
+
+static struct clk aux_clkin = {
+	.name = "aux_clkin",
+	.rate = DM646X_AUX_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name = "pll1",
+	.parent = &ref_clk,
+	.pll_data = &pll1_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name = "pll1_sysclk1",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name = "pll1_sysclk2",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name = "pll1_sysclk3",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name = "pll1_sysclk4",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name = "pll1_sysclk5",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+	.name = "pll1_sysclk6",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV6,
+};
+
+static struct clk pll1_sysclk8 = {
+	.name = "pll1_sysclk8",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV8,
+};
+
+static struct clk pll1_sysclk9 = {
+	.name = "pll1_sysclk9",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV9,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name = "pll1_sysclkbp",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV,
+};
+
+static struct clk pll1_aux_clk = {
+	.name = "pll1_aux_clk",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll2_clk = {
+	.name = "pll2_clk",
+	.parent = &ref_clk,
+	.pll_data = &pll2_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name = "pll2_sysclk1",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk dsp_clk = {
+	.name = "dsp",
+	.parent = &pll1_sysclk1,
+	.lpsc = DM646X_LPSC_C64X_CPU,
+	.flags = PSC_DSP,
+	.usecount = 1,			/* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+	.name = "arm",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_ARM,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk uart0_clk = {
+	.name = "uart0",
+	.parent = &aux_clkin,
+	.lpsc = DM646X_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name = "uart1",
+	.parent = &aux_clkin,
+	.lpsc = DM646X_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+	.name = "uart2",
+	.parent = &aux_clkin,
+	.lpsc = DM646X_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+	.name = "I2CCLK",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_I2C,
+};
+
+static struct clk gpio_clk = {
+	.name = "gpio",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+	.name = "aemif",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_AEMIF,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk emac_clk = {
+	.name = "emac",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_EMAC,
+};
+
+static struct clk pwm0_clk = {
+	.name = "pwm0",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_PWM0,
+	.usecount = 1,            /* REVIST: disabling hangs system */
+};
+
+static struct clk pwm1_clk = {
+	.name = "pwm1",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_PWM1,
+	.usecount = 1,            /* REVIST: disabling hangs system */
+};
+
+static struct clk timer0_clk = {
+	.name = "timer0",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name = "timer1",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name = "timer2",
+	.parent = &pll1_sysclk3,
+	.flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
+};
+
+static struct clk vpif0_clk = {
+	.name = "vpif0",
+	.parent = &ref_clk,
+	.lpsc = DM646X_LPSC_VPSSMSTR,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk vpif1_clk = {
+	.name = "vpif1",
+	.parent = &ref_clk,
+	.lpsc = DM646X_LPSC_VPSSSLV,
+	.flags = ALWAYS_ENABLED,
+};
+
+struct davinci_clk dm646x_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "aux", &aux_clkin),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk4),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk5),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk6),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk8),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk9),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclkbp),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "dsp", &dsp_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK(NULL, "uart2", &uart2_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, "vpif0", &vpif0_clk),
+	CLK(NULL, "vpif1", &vpif1_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+static struct emac_platform_data dm646x_emac_pdata = {
+	.ctrl_reg_offset	= DM646X_EMAC_CNTRL_OFFSET,
+	.ctrl_mod_reg_offset	= DM646X_EMAC_CNTRL_MOD_OFFSET,
+	.ctrl_ram_offset	= DM646X_EMAC_CNTRL_RAM_OFFSET,
+	.mdio_reg_offset	= DM646X_EMAC_MDIO_OFFSET,
+	.ctrl_ram_size		= DM646X_EMAC_CNTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_2,
+};
+
+static struct resource dm646x_emac_resources[] = {
+	{
+		.start	= DM646X_EMAC_BASE,
+		.end	= DM646X_EMAC_BASE + 0x47ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DM646X_EMACRXTHINT,
+		.end	= IRQ_DM646X_EMACRXTHINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_EMACRXINT,
+		.end	= IRQ_DM646X_EMACRXINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_EMACTXINT,
+		.end	= IRQ_DM646X_EMACTXINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_EMACMISCINT,
+		.end	= IRQ_DM646X_EMACMISCINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm646x_emac_device = {
+	.name		= "davinci_emac",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &dm646x_emac_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(dm646x_emac_resources),
+	.resource	= dm646x_emac_resources,
+};
+
+#define PINMUX0		0x00
+#define PINMUX1		0x04
+
+/*
+ * Device specific mux setup
+ *
+ *	soc	description	mux  mode   mode  mux	 dbg
+ *				reg  offset mask  mode
+ */
+static const struct mux_config dm646x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM646X, ATAEN,		0,   0,     1,	  1,	 true)
+
+MUX_CFG(DM646X, AUDCK1,		0,   29,    1,	  0,	 false)
+
+MUX_CFG(DM646X, AUDCK0,		0,   28,    1,	  0,	 false)
+
+MUX_CFG(DM646X, CRGMUX,			0,   24,    7,    5,	 true)
+
+MUX_CFG(DM646X, STSOMUX_DISABLE,	0,   22,    3,    0,	 true)
+
+MUX_CFG(DM646X, STSIMUX_DISABLE,	0,   20,    3,    0,	 true)
+
+MUX_CFG(DM646X, PTSOMUX_DISABLE,	0,   18,    3,    0,	 true)
+
+MUX_CFG(DM646X, PTSIMUX_DISABLE,	0,   16,    3,    0,	 true)
+
+MUX_CFG(DM646X, STSOMUX,		0,   22,    3,    2,	 true)
+
+MUX_CFG(DM646X, STSIMUX,		0,   20,    3,    2,	 true)
+
+MUX_CFG(DM646X, PTSOMUX_PARALLEL,	0,   18,    3,    2,	 true)
+
+MUX_CFG(DM646X, PTSIMUX_PARALLEL,	0,   16,    3,    2,	 true)
+
+MUX_CFG(DM646X, PTSOMUX_SERIAL,		0,   18,    3,    3,	 true)
+
+MUX_CFG(DM646X, PTSIMUX_SERIAL,		0,   16,    3,    3,	 true)
+#endif
+};
+
+static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_DM646X_VP_VERTINT0]        = 7,
+	[IRQ_DM646X_VP_VERTINT1]        = 7,
+	[IRQ_DM646X_VP_VERTINT2]        = 7,
+	[IRQ_DM646X_VP_VERTINT3]        = 7,
+	[IRQ_DM646X_VP_ERRINT]          = 7,
+	[IRQ_DM646X_RESERVED_1]         = 7,
+	[IRQ_DM646X_RESERVED_2]         = 7,
+	[IRQ_DM646X_WDINT]              = 7,
+	[IRQ_DM646X_CRGENINT0]          = 7,
+	[IRQ_DM646X_CRGENINT1]          = 7,
+	[IRQ_DM646X_TSIFINT0]           = 7,
+	[IRQ_DM646X_TSIFINT1]           = 7,
+	[IRQ_DM646X_VDCEINT]            = 7,
+	[IRQ_DM646X_USBINT]             = 7,
+	[IRQ_DM646X_USBDMAINT]          = 7,
+	[IRQ_DM646X_PCIINT]             = 7,
+	[IRQ_CCINT0]                    = 7,    /* dma */
+	[IRQ_CCERRINT]                  = 7,    /* dma */
+	[IRQ_TCERRINT0]                 = 7,    /* dma */
+	[IRQ_TCERRINT]                  = 7,    /* dma */
+	[IRQ_DM646X_TCERRINT2]          = 7,
+	[IRQ_DM646X_TCERRINT3]          = 7,
+	[IRQ_DM646X_IDE]                = 7,
+	[IRQ_DM646X_HPIINT]             = 7,
+	[IRQ_DM646X_EMACRXTHINT]        = 7,
+	[IRQ_DM646X_EMACRXINT]          = 7,
+	[IRQ_DM646X_EMACTXINT]          = 7,
+	[IRQ_DM646X_EMACMISCINT]        = 7,
+	[IRQ_DM646X_MCASP0TXINT]        = 7,
+	[IRQ_DM646X_MCASP0RXINT]        = 7,
+	[IRQ_AEMIFINT]                  = 7,
+	[IRQ_DM646X_RESERVED_3]         = 7,
+	[IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
+	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
+	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
+	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
+	[IRQ_PWMINT0]                   = 7,
+	[IRQ_PWMINT1]                   = 7,
+	[IRQ_DM646X_VLQINT]             = 7,
+	[IRQ_I2C]                       = 7,
+	[IRQ_UARTINT0]                  = 7,
+	[IRQ_UARTINT1]                  = 7,
+	[IRQ_DM646X_UARTINT2]           = 7,
+	[IRQ_DM646X_SPINT0]             = 7,
+	[IRQ_DM646X_SPINT1]             = 7,
+	[IRQ_DM646X_DSP2ARMINT]         = 7,
+	[IRQ_DM646X_RESERVED_4]         = 7,
+	[IRQ_DM646X_PSCINT]             = 7,
+	[IRQ_DM646X_GPIO0]              = 7,
+	[IRQ_DM646X_GPIO1]              = 7,
+	[IRQ_DM646X_GPIO2]              = 7,
+	[IRQ_DM646X_GPIO3]              = 7,
+	[IRQ_DM646X_GPIO4]              = 7,
+	[IRQ_DM646X_GPIO5]              = 7,
+	[IRQ_DM646X_GPIO6]              = 7,
+	[IRQ_DM646X_GPIO7]              = 7,
+	[IRQ_DM646X_GPIOBNK0]           = 7,
+	[IRQ_DM646X_GPIOBNK1]           = 7,
+	[IRQ_DM646X_GPIOBNK2]           = 7,
+	[IRQ_DM646X_DDRINT]             = 7,
+	[IRQ_DM646X_AEMIFINT]           = 7,
+	[IRQ_COMMTX]                    = 7,
+	[IRQ_COMMRX]                    = 7,
+	[IRQ_EMUINT]                    = 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm646x_no_event[] = {
+	 0,  1,  2,  3, 13,
+	14, 15, 24, 25, 26,
+	27, 30, 31, 54, 55,
+	56,
+	-1
+};
+
+static struct edma_soc_info dm646x_edma_info = {
+	.n_channel	= 64,
+	.n_region	= 6,	/* 0-1, 4-7 */
+	.n_slot		= 512,
+	.n_tc		= 4,
+	.noevent	= dma_chan_dm646x_no_event,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc2",
+		.start	= 0x01c10800,
+		.end	= 0x01c10800 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc3",
+		.start	= 0x01c10c00,
+		.end	= 0x01c10c00 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using TC*_ERR */
+};
+
+static struct platform_device dm646x_edma_device = {
+	.name			= "edma",
+	.id			= -1,
+	.dev.platform_data	= &dm646x_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm646x_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00010000),
+		.length		= SZ_32K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm646x_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb770,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6467,
+		.name		= "dm6467",
+	},
+};
+
+static void __iomem *dm646x_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm646x_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART2_BASE,
+		.irq		= IRQ_DM646X_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm646x_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm646x_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm646x = {
+	.io_desc		= dm646x_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm646x_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm646x_ids,
+	.ids_num		= ARRAY_SIZE(dm646x_ids),
+	.cpu_clks		= dm646x_clks,
+	.psc_bases		= dm646x_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm646x_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm646x_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm646x_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios		= dm646x_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm646x_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 43, /* Only 33 usable */
+	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
+	.serial_dev		= &dm646x_serial_device,
+	.emac_pdata		= &dm646x_emac_pdata,
+	.sram_dma		= 0x10010000,
+	.sram_len		= SZ_32K,
+};
+
+void __init dm646x_init(void)
+{
+	davinci_common_init(&davinci_soc_info_dm646x);
+}
+
+static int __init dm646x_init_devices(void)
+{
+	if (!cpu_is_davinci_dm646x())
+		return 0;
+
+	platform_device_register(&dm646x_edma_device);
+	platform_device_register(&dm646x_emac_device);
+	return 0;
+}
+postcore_initcall(dm646x_init_devices);
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 1aba41c6351..1b6532159c5 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -23,6 +23,7 @@
 #include <mach/cputype.h>
 #include <mach/irqs.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <mach/gpio.h>
 
 #include <asm/mach/irq.h>
@@ -37,14 +38,13 @@ struct davinci_gpio {
 
 static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
 
-static unsigned __initdata ngpio;
-
 /* create a non-inlined version */
 static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
 {
 	return __gpio_to_controller(gpio);
 }
 
+static int __init davinci_gpio_irq_setup(void);
 
 /*--------------------------------------------------------------------------*/
 
@@ -115,23 +115,16 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 static int __init davinci_gpio_setup(void)
 {
 	int i, base;
+	unsigned ngpio;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
-	/* The gpio banks conceptually expose a segmented bitmap,
+	/*
+	 * The gpio banks conceptually expose a segmented bitmap,
 	 * and "ngpio" is one more than the largest zero-based
 	 * bit index that's valid.
 	 */
-	if (cpu_is_davinci_dm355()) {		/* or dm335() */
-		ngpio = 104;
-	} else if (cpu_is_davinci_dm644x()) {	/* or dm337() */
-		ngpio = 71;
-	} else if (cpu_is_davinci_dm646x()) {
-		/* NOTE:  each bank has several "reserved" bits,
-		 * unusable as GPIOs.  Only 33 of the GPIO numbers
-		 * are usable, and we're not rejecting the others.
-		 */
-		ngpio = 43;
-	} else {
-		/* if cpu_is_davinci_dm643x() ngpio = 111 */
+	ngpio = soc_info->gpio_num;
+	if (ngpio == 0) {
 		pr_err("GPIO setup:  how many GPIOs?\n");
 		return -EINVAL;
 	}
@@ -157,6 +150,7 @@ static int __init davinci_gpio_setup(void)
 		gpiochip_add(&chips[i].chip);
 	}
 
+	davinci_gpio_irq_setup();
 	return 0;
 }
 pure_initcall(davinci_gpio_setup);
@@ -187,10 +181,15 @@ static void gpio_irq_enable(unsigned irq)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
 	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	unsigned status = irq_desc[irq].status;
+
+	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+	if (!status)
+		status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
 
-	if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING)
+	if (status & IRQ_TYPE_EDGE_FALLING)
 		__raw_writel(mask, &g->set_falling);
-	if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING)
+	if (status & IRQ_TYPE_EDGE_RISING)
 		__raw_writel(mask, &g->set_rising);
 }
 
@@ -205,10 +204,13 @@ static int gpio_irq_type(unsigned irq, unsigned trigger)
 	irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
 	irq_desc[irq].status |= trigger;
 
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
-		     ? &g->set_falling : &g->clr_falling);
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
-		     ? &g->set_rising : &g->clr_rising);
+	/* don't enable the IRQ if it's currently disabled */
+	if (irq_desc[irq].depth == 0) {
+		__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+			     ? &g->set_falling : &g->clr_falling);
+		__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+			     ? &g->set_rising : &g->clr_rising);
+	}
 	return 0;
 }
 
@@ -230,6 +232,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 		mask <<= 16;
 
 	/* temporarily mask (level sensitive) parent IRQ */
+	desc->chip->mask(irq);
 	desc->chip->ack(irq);
 	while (1) {
 		u32		status;
@@ -268,17 +271,15 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 static int __init davinci_gpio_irq_setup(void)
 {
 	unsigned	gpio, irq, bank;
-	unsigned	bank_irq;
 	struct clk	*clk;
 	u32		binten = 0;
+	unsigned	ngpio, bank_irq;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	ngpio = soc_info->gpio_num;
 
-	if (cpu_is_davinci_dm355()) {		/* or dm335() */
-		bank_irq = IRQ_DM355_GPIOBNK0;
-	} else if (cpu_is_davinci_dm644x()) {
-		bank_irq = IRQ_GPIOBNK0;
-	} else if (cpu_is_davinci_dm646x()) {
-		bank_irq = IRQ_DM646X_GPIOBNK0;
-	} else {
+	bank_irq = soc_info->gpio_irq;
+	if (bank_irq == 0) {
 		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
 		return -EINVAL;
 	}
@@ -318,11 +319,9 @@ static int __init davinci_gpio_irq_setup(void)
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
-	__raw_writel(binten, (void *__iomem)
-		     IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
+	__raw_writel(binten, soc_info->gpio_base + 0x08);
 
 	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
 
 	return 0;
 }
-arch_initcall(davinci_gpio_irq_setup);
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
deleted file mode 100644
index 018b994cd79..00000000000
--- a/arch/arm/mach-davinci/id.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Davinci CPU identification code
- *
- * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * Derived from OMAP1 CPU identification code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define JTAG_ID_BASE		IO_ADDRESS(0x01c40028)
-
-static unsigned int davinci_revision;
-
-struct davinci_id {
-	u8	variant;	/* JTAG ID bits 31:28 */
-	u16	part_no;	/* JTAG ID bits 27:12 */
-	u32	manufacturer;	/* JTAG ID bits 11:1 */
-	u32	type;		/* Cpu id bits [31:8], cpu class bits [7:0] */
-};
-
-/* Register values to detect the DaVinci version */
-static struct davinci_id davinci_ids[] __initdata = {
-	{
-		/* DM6446 */
-		.part_no      = 0xb700,
-		.variant      = 0x0,
-		.manufacturer = 0x017,
-		.type	      = 0x64460000,
-	},
-	{
-		/* DM646X */
-		.part_no      = 0xb770,
-		.variant      = 0x0,
-		.manufacturer = 0x017,
-		.type         = 0x64670000,
-	},
-	{
-		/* DM355 */
-		.part_no	= 0xb73b,
-		.variant	= 0x0,
-		.manufacturer	= 0x00f,
-		.type		= 0x03550000,
-	},
-};
-
-/*
- * Get Device Part No. from JTAG ID register
- */
-static u16 __init davinci_get_part_no(void)
-{
-	u32 dev_id, part_no;
-
-	dev_id = __raw_readl(JTAG_ID_BASE);
-
-	part_no = ((dev_id >> 12) & 0xffff);
-
-	return part_no;
-}
-
-/*
- * Get Device Revision from JTAG ID register
- */
-static u8 __init davinci_get_variant(void)
-{
-	u32 variant;
-
-	variant = __raw_readl(JTAG_ID_BASE);
-
-	variant = (variant >> 28) & 0xf;
-
-	return variant;
-}
-
-unsigned int davinci_rev(void)
-{
-	return davinci_revision >> 16;
-}
-EXPORT_SYMBOL(davinci_rev);
-
-void __init davinci_check_revision(void)
-{
-	int i;
-	u16 part_no;
-	u8 variant;
-
-	part_no = davinci_get_part_no();
-	variant = davinci_get_variant();
-
-	/* First check only the major version in a safe way */
-	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
-		if (part_no == (davinci_ids[i].part_no)) {
-			davinci_revision = davinci_ids[i].type;
-			break;
-		}
-	}
-
-	/* Check if we can find the dev revision */
-	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
-		if (part_no == davinci_ids[i].part_no &&
-		    variant == davinci_ids[i].variant) {
-			davinci_revision = davinci_ids[i].type;
-			break;
-		}
-	}
-
-	printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
-	       davinci_rev(), variant);
-}
diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
deleted file mode 100644
index 3216f21c123..00000000000
--- a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * DaVinci DM6446 EVM board specific headers
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or ifndef.
- */
-
-#ifndef _MACH_DAVINCI_DM6446EVM_H
-#define _MACH_DAVINCI_DM6446EVM_H
-
-#include <linux/types.h>
-
-int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
-int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 19177097625..a1f03b606d8 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -17,7 +17,8 @@ struct sys_timer;
 extern struct sys_timer davinci_timer;
 
 extern void davinci_irq_init(void);
-extern void davinci_map_common_io(void);
+extern void __iomem *davinci_intc_base;
+extern int davinci_intc_type;
 
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
@@ -25,4 +26,56 @@ extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 
+struct davinci_timer_instance {
+	void __iomem	*base;
+	u32		bottom_irq;
+	u32		top_irq;
+	unsigned long	cmp_off;
+	unsigned int	cmp_irq;
+};
+
+struct davinci_timer_info {
+	struct davinci_timer_instance	*timers;
+	unsigned int			clockevent_id;
+	unsigned int			clocksource_id;
+};
+
+/* SoC specific init support */
+struct davinci_soc_info {
+	struct map_desc			*io_desc;
+	unsigned long			io_desc_num;
+	u32				cpu_id;
+	u32				jtag_id;
+	void __iomem			*jtag_id_base;
+	struct davinci_id		*ids;
+	unsigned long			ids_num;
+	struct davinci_clk		*cpu_clks;
+	void __iomem			**psc_bases;
+	unsigned long			psc_bases_num;
+	void __iomem			*pinmux_base;
+	const struct mux_config		*pinmux_pins;
+	unsigned long			pinmux_pins_num;
+	void __iomem			*intc_base;
+	int				intc_type;
+	u8				*intc_irq_prios;
+	unsigned long			intc_irq_num;
+	struct davinci_timer_info	*timer_info;
+	void __iomem			*wdt_base;
+	void __iomem			*gpio_base;
+	unsigned			gpio_num;
+	unsigned			gpio_irq;
+	struct platform_device		*serial_dev;
+	struct emac_platform_data	*emac_pdata;
+	dma_addr_t			sram_dma;
+	unsigned			sram_len;
+};
+
+extern struct davinci_soc_info davinci_soc_info;
+
+extern void davinci_common_init(struct davinci_soc_info *soc_info);
+
+/* standard place to map on-chip SRAMs; they *may* support DMA */
+#define SRAM_VIRT	0xfffe0000
+#define SRAM_SIZE	SZ_128K
+
 #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h
new file mode 100644
index 00000000000..c4d27eec806
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cp_intc.h
@@ -0,0 +1,57 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) definitions
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __ASM_HARDWARE_CP_INTC_H
+#define __ASM_HARDWARE_CP_INTC_H
+
+#define CP_INTC_REV			0x00
+#define CP_INTC_CTRL			0x04
+#define CP_INTC_HOST_CTRL		0x0C
+#define CP_INTC_GLOBAL_ENABLE		0x10
+#define CP_INTC_GLOBAL_NESTING_LEVEL	0x1C
+#define CP_INTC_SYS_STAT_IDX_SET	0x20
+#define CP_INTC_SYS_STAT_IDX_CLR	0x24
+#define CP_INTC_SYS_ENABLE_IDX_SET	0x28
+#define CP_INTC_SYS_ENABLE_IDX_CLR	0x2C
+#define CP_INTC_GLOBAL_WAKEUP_ENABLE	0x30
+#define CP_INTC_HOST_ENABLE_IDX_SET	0x34
+#define CP_INTC_HOST_ENABLE_IDX_CLR	0x38
+#define CP_INTC_PACING_PRESCALE 	0x40
+#define CP_INTC_VECTOR_BASE		0x50
+#define CP_INTC_VECTOR_SIZE		0x54
+#define CP_INTC_VECTOR_NULL		0x58
+#define CP_INTC_PRIO_IDX		0x80
+#define CP_INTC_PRIO_VECTOR		0x84
+#define CP_INTC_SECURE_ENABLE		0x90
+#define CP_INTC_SECURE_PRIO_IDX 	0x94
+#define CP_INTC_PACING_PARAM(n) 	(0x0100 + (n << 4))
+#define CP_INTC_PACING_DEC(n)		(0x0104 + (n << 4))
+#define CP_INTC_PACING_MAP(n)		(0x0108 + (n << 4))
+#define CP_INTC_SYS_RAW_STAT(n) 	(0x0200 + (n << 2))
+#define CP_INTC_SYS_STAT_CLR(n) 	(0x0280 + (n << 2))
+#define CP_INTC_SYS_ENABLE_SET(n)	(0x0300 + (n << 2))
+#define CP_INTC_SYS_ENABLE_CLR(n)	(0x0380 + (n << 2))
+#define CP_INTC_CHAN_MAP(n)		(0x0400 + (n << 2))
+#define CP_INTC_HOST_MAP(n)		(0x0800 + (n << 2))
+#define CP_INTC_HOST_PRIO_IDX(n)	(0x0900 + (n << 2))
+#define CP_INTC_SYS_POLARITY(n) 	(0x0D00 + (n << 2))
+#define CP_INTC_SYS_TYPE(n)		(0x0D80 + (n << 2))
+#define CP_INTC_WAKEUP_ENABLE(n)	(0x0E00 + (n << 2))
+#define CP_INTC_DEBUG_SELECT(n) 	(0x0F00 + (n << 2))
+#define CP_INTC_SYS_SECURE_ENABLE(n)	(0x1000 + (n << 2))
+#define CP_INTC_HOST_NESTING_LEVEL(n)	(0x1100 + (n << 2))
+#define CP_INTC_HOST_ENABLE(n)		(0x1500 + (n << 2))
+#define CP_INTC_HOST_PRIO_VECTOR(n)	(0x1600 + (n << 2))
+#define CP_INTC_VECTOR_ADDR(n)		(0x2000 + (n << 2))
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+			 u8 *irq_prio);
+
+#endif	/* __ASM_HARDWARE_CP_INTC_H */
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index 27cfb1b3a66..d12a5ed2959 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -16,17 +16,30 @@
 #ifndef _ASM_ARCH_CPU_H
 #define _ASM_ARCH_CPU_H
 
-extern unsigned int davinci_rev(void);
+#include <mach/common.h>
 
-#define IS_DAVINCI_CPU(type, id)			\
-static inline int is_davinci_dm ##type(void)	        \
-{							\
-	return (davinci_rev() == (id)) ? 1 : 0;	        \
+struct davinci_id {
+	u8	variant;	/* JTAG ID bits 31:28 */
+	u16	part_no;	/* JTAG ID bits 27:12 */
+	u16	manufacturer;	/* JTAG ID bits 11:1 */
+	u32	cpu_id;
+	char	*name;
+};
+
+/* Can use lower 16 bits of cpu id  for a variant when required */
+#define	DAVINCI_CPU_ID_DM6446		0x64460000
+#define	DAVINCI_CPU_ID_DM6467		0x64670000
+#define	DAVINCI_CPU_ID_DM355		0x03550000
+
+#define IS_DAVINCI_CPU(type, id)					\
+static inline int is_davinci_ ##type(void)				\
+{									\
+	return (davinci_soc_info.cpu_id == (id));			\
 }
 
-IS_DAVINCI_CPU(644x, 0x6446)
-IS_DAVINCI_CPU(646x, 0x6467)
-IS_DAVINCI_CPU(355, 0x355)
+IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
+IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
+IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index e6c0f0d5d06..de3fc2182b4 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -9,6 +9,16 @@
  * or implied.
  */
 
+/* Modifications
+ * Jan 2009	Chaithrika U S	Added senduart, busyuart, waituart
+ *				macros, based on debug-8250.S file
+ *				but using 32-bit accesses required for
+ *                              some davinci devices.
+ */
+
+#include <linux/serial_reg.h>
+#define UART_SHIFT	2
+
 		.macro addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
@@ -17,5 +27,22 @@
 		orr	\rx, \rx, #0x00c20000   @ UART 0
 		.endm
 
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#ifdef FLOW_CONTROL
+1001:		ldr	\rd, [\rx, #UART_MSR << UART_SHIFT]
+		tst	\rd, #UART_MSR_CTS
+		beq	1001b
+#endif
+		.endm
+
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
new file mode 100644
index 00000000000..54903b72438
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -0,0 +1,22 @@
+/*
+ * Chip specific defines for DM355 SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM355_H
+#define __ASM_ARCH_DM355_H
+
+#include <mach/hardware.h>
+
+struct spi_board_info;
+
+void __init dm355_init(void);
+void dm355_init_spi0(unsigned chipselect_mask,
+		struct spi_board_info *info, unsigned len);
+
+#endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 3dcb9f4e58b..15d42b92a8c 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -24,6 +24,7 @@
 
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
+#include <mach/emac.h>
 
 #define DM644X_EMAC_BASE		(0x01C80000)
 #define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
new file mode 100644
index 00000000000..1fc764c8646
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -0,0 +1,26 @@
+/*
+ * Chip specific defines for DM646x SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM646X_H
+#define __ASM_ARCH_DM646X_H
+
+#include <mach/hardware.h>
+#include <mach/emac.h>
+
+#define DM646X_EMAC_BASE		(0x01C80000)
+#define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
+#define DM646X_EMAC_CNTRL_MOD_OFFSET	(0x1000)
+#define DM646X_EMAC_CNTRL_RAM_OFFSET	(0x2000)
+#define DM646X_EMAC_MDIO_OFFSET		(0x4000)
+#define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
+
+void __init dm646x_init(void);
+
+#endif /* __ASM_ARCH_DM646X_H */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index f6fc5396daf..24a379239d7 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -208,10 +208,6 @@ void edma_clear_event(unsigned channel);
 void edma_pause(unsigned channel);
 void edma_resume(unsigned channel);
 
-/* UNRELATED TO DMA */
-int davinci_alloc_iram(unsigned size);
-void davinci_free_iram(unsigned addr, unsigned size);
-
 /* platform_data for EDMA driver */
 struct edma_soc_info {
 
diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h
new file mode 100644
index 00000000000..beff4fb7c84
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/emac.h
@@ -0,0 +1,36 @@
+/*
+ * TI DaVinci EMAC platform support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _MACH_DAVINCI_EMAC_H
+#define _MACH_DAVINCI_EMAC_H
+
+#include <linux/if_ether.h>
+#include <linux/memory.h>
+
+struct emac_platform_data {
+	char mac_addr[ETH_ALEN];
+	u32 ctrl_reg_offset;
+	u32 ctrl_mod_reg_offset;
+	u32 ctrl_ram_offset;
+	u32 mdio_reg_offset;
+	u32 ctrl_ram_size;
+	u32 phy_mask;
+	u32 mdio_max_freq;
+	u8 rmii_en;
+	u8 version;
+};
+
+enum {
+	EMAC_VERSION_1,	/* DM644x */
+	EMAC_VERSION_2,	/* DM646x */
+};
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
index 039b84f933b..fbdebc7cb40 100644
--- a/arch/arm/mach-davinci/include/mach/entry-macro.S
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -15,17 +15,36 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
-		ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+		ldr \base, =davinci_intc_base
+		ldr \base, [\base]
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
+		ldr \tmp, =davinci_intc_type
+		ldr \tmp, [\tmp]
+		cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC
+		beq 1001f
+#endif
+#if defined(CONFIG_AINTC)
 		ldr \tmp, [\base, #0x14]
-		mov \tmp, \tmp, lsr #2
+		movs \tmp, \tmp, lsr #2
 		sub \irqnr, \tmp, #1
-		cmp \tmp, #0
+		b 1002f
+#endif
+#if defined(CONFIG_CP_INTC)
+1001:		ldr \irqnr, [\base, #0x80] /* get irq number */
+		and \irqnr, \irqnr, #0xff  /* irq is in bits 0-9 */
+		mov \tmp, \irqnr, lsr #3
+		and \tmp, \tmp, #0xfc
+		add \tmp, \tmp, #0x280 /* get the register offset */
+		ldr \irqstat, [\base, \tmp] /* get the intc status */
+		cmp \irqstat, #0x0
+#endif
+1002:
 		.endm
 
 		.macro	irq_prio_table
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index efe3281364e..ae074556831 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -17,6 +17,7 @@
 #include <asm-generic/gpio.h>
 
 #include <mach/irqs.h>
+#include <mach/common.h>
 
 #define DAVINCI_GPIO_BASE 0x01C67000
 
@@ -67,15 +68,16 @@ static inline struct gpio_controller *__iomem
 __gpio_to_controller(unsigned gpio)
 {
 	void *__iomem ptr;
+	void __iomem *base = davinci_soc_info.gpio_base;
 
 	if (gpio < 32 * 1)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+		ptr = base + 0x10;
 	else if (gpio < 32 * 2)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+		ptr = base + 0x38;
 	else if (gpio < 32 * 3)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+		ptr = base + 0x60;
 	else if (gpio < 32 * 4)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
+		ptr = base + 0x88;
 	else
 		ptr = NULL;
 	return ptr;
@@ -142,13 +144,13 @@ static inline int gpio_to_irq(unsigned gpio)
 {
 	if (gpio >= DAVINCI_N_GPIO)
 		return -EINVAL;
-	return DAVINCI_N_AINTC_IRQ + gpio;
+	return davinci_soc_info.intc_irq_num + gpio;
 }
 
 static inline int irq_to_gpio(unsigned irq)
 {
 	/* caller guarantees gpio_to_irq() succeeded */
-	return irq - DAVINCI_N_AINTC_IRQ;
+	return irq - davinci_soc_info.intc_irq_num;
 }
 
 #endif				/* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 18066074c99..bc5d6aaa69a 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -30,6 +30,9 @@
 /* Base address */
 #define DAVINCI_ARM_INTC_BASE 0x01C48000
 
+#define DAVINCI_INTC_TYPE_AINTC		0
+#define DAVINCI_INTC_TYPE_CP_INTC	1
+
 /* Interrupt lines */
 #define IRQ_VDINT0       0
 #define IRQ_VDINT1       1
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index 86c25c7f3ce..c712c7cdf38 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -21,7 +21,6 @@
  * Definitions
  **************************************************************************/
 #define DAVINCI_DDR_BASE    0x80000000
-#define DAVINCI_IRAM_BASE   0x00008000 /* ARM Internal RAM */
 
 #define PHYS_OFFSET DAVINCI_DDR_BASE
 
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
new file mode 100644
index 00000000000..5a85e24f367
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -0,0 +1,33 @@
+/*
+ *  Board-specific MMC configuration
+ */
+
+#ifndef _DAVINCI_MMC_H
+#define _DAVINCI_MMC_H
+
+#include <linux/types.h>
+#include <linux/mmc/host.h>
+
+struct davinci_mmc_config {
+	/* get_cd()/get_wp() may sleep */
+	int	(*get_cd)(int module);
+	int	(*get_ro)(int module);
+	/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
+	u8	wires;
+
+	u32     max_freq;
+
+	/* any additional host capabilities: OR'd in to mmc->f_caps */
+	u32     caps;
+
+	/* Version of the MMC/SD controller */
+	u8	version;
+};
+void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
+
+enum {
+	MMC_CTLR_VERSION_1 = 0,	/* DM644x and DM355 */
+	MMC_CTLR_VERSION_2,	/* DA830 */
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index bae22cb3e27..27378458542 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -19,16 +19,6 @@
 #ifndef __INC_MACH_MUX_H
 #define __INC_MACH_MUX_H
 
-/* System module registers */
-#define PINMUX0			0x00
-#define PINMUX1			0x04
-/* dm355 only */
-#define PINMUX2			0x08
-#define PINMUX3			0x0c
-#define PINMUX4			0x10
-#define INTMUX			0x18
-#define EVTMUX			0x1c
-
 struct mux_config {
 	const char *name;
 	const char *mux_reg_name;
@@ -168,15 +158,9 @@ enum davinci_dm355_index {
 
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
-extern void davinci_mux_init(void);
-extern int davinci_mux_register(const struct mux_config *pins,
-				unsigned long size);
 extern int davinci_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
-static inline void davinci_mux_init(void) {}
-static inline int davinci_mux_register(const struct mux_config *pins,
-				       unsigned long size) { return 0; }
 static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
 #endif
 
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 55a90d419fa..ab8a2586d1c 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -27,6 +27,8 @@
 #ifndef __ASM_ARCH_PSC_H
 #define __ASM_ARCH_PSC_H
 
+#define	DAVINCI_PWR_SLEEP_CNTRL_BASE	0x01C41000
+
 /* Power and Sleep Controller (PSC) Domains */
 #define DAVINCI_GPSC_ARMDOMAIN      0
 #define DAVINCI_GPSC_DSPDOMAIN      1
@@ -116,8 +118,8 @@
 #define DM646X_LPSC_TIMER1         35
 #define DM646X_LPSC_ARM_INTC       45
 
-extern int davinci_psc_is_clk_active(unsigned int id);
-extern void davinci_psc_config(unsigned int domain, unsigned int id,
-			       char enable);
+extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+		unsigned int id, char enable);
 
 #endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 632847d74a1..794fa5cf93c 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -18,8 +18,6 @@
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
 
-#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
-
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU		0x0c
 #define UART_DM646X_SCR			0x10
@@ -30,6 +28,6 @@ struct davinci_uart_config {
 	unsigned int enabled_uarts;
 };
 
-extern void davinci_serial_init(struct davinci_uart_config *);
+extern int davinci_serial_init(struct davinci_uart_config *);
 
 #endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h
new file mode 100644
index 00000000000..111f7cc71e0
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/sram.h
@@ -0,0 +1,27 @@
+/*
+ * mach/sram.h - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_SRAM_H
+#define __MACH_SRAM_H
+
+/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY	512
+
+/*
+ * SRAM allocations return a CPU virtual address, or NULL on error.
+ * If a DMA address is requested and the SRAM supports DMA, its
+ * mapped address is also returned.
+ *
+ * Errors include SRAM memory not being available, and requesting
+ * DMA mapped SRAM on systems which don't allow that.
+ */
+extern void *sram_alloc(size_t len, dma_addr_t *dma);
+extern void sram_free(void *addr, size_t len);
+
+#endif /* __MACH_SRAM_H */
diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h
new file mode 100644
index 00000000000..1c971d8d8ba
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/time.h
@@ -0,0 +1,35 @@
+/*
+ * Local header file for DaVinci time code.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H
+#define __ARCH_ARM_MACH_DAVINCI_TIME_H
+
+#define DAVINCI_TIMER0_BASE		(IO_PHYS + 0x21400)
+#define DAVINCI_TIMER1_BASE		(IO_PHYS + 0x21800)
+#define DAVINCI_WDOG_BASE		(IO_PHYS + 0x21C00)
+
+enum {
+	T0_BOT,
+	T0_TOP,
+	T1_BOT,
+	T1_TOP,
+	NUM_TIMERS
+};
+
+#define IS_TIMER1(id)		(id & 0x2)
+#define IS_TIMER0(id)		(!IS_TIMER1(id))
+#define IS_TIMER_TOP(id)	((id & 0x1))
+#define IS_TIMER_BOT(id)	(!IS_TIMER_TOP(id))
+
+#define ID_TO_TIMER(id)		(IS_TIMER1(id) != 0)
+
+extern struct davinci_timer_instance davinci_timer_instance[];
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 8c165def37b..1e27475f9a2 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -13,11 +13,24 @@
 #include <linux/serial_reg.h>
 #include <mach/serial.h>
 
+#include <asm/mach-types.h>
+
+extern unsigned int __machine_arch_type;
+
+static u32 *uart;
+
+static u32 *get_uart_base(void)
+{
+	/* Add logic here for new platforms, using __macine_arch_type */
+	return (u32 *)DAVINCI_UART0_BASE;
+}
+
 /* PORT_16C550A, in polled non-fifo mode */
 
 static void putc(char c)
 {
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+	if (!uart)
+		uart = get_uart_base();
 
 	while (!(uart[UART_LSR] & UART_LSR_THRE))
 		barrier();
@@ -26,7 +39,9 @@ static void putc(char c)
 
 static inline void flush(void)
 {
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+	if (!uart)
+		uart = get_uart_base();
+
 	while (!(uart[UART_LSR] & UART_LSR_THRE))
 		barrier();
 }
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index a548abb513e..49912b48b1b 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -9,47 +9,9 @@
  */
 
 #include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/io.h>
 
 #include <asm/tlb.h>
-#include <asm/memory.h>
-
-#include <asm/mach/map.h>
-#include <mach/clock.h>
-
-extern void davinci_check_revision(void);
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc davinci_io_desc[] __initdata = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init davinci_map_common_io(void)
-{
-	iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc));
-
-	/* Normally devicemaps_init() would flush caches and tlb after
-	 * mdesc->map_io(), but we must also do it here because of the CPU
-	 * revision check below.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-
-	/* We want to check CPU revision early for cpu_is_xxxx() macros.
-	 * IO space mapping must be initialized before we can do that.
-	 */
-	davinci_check_revision();
-}
 
 #define BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p, pst, vst)	((void __iomem *)((p) - (pst) + (vst)))
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 5a324c90e29..af92ffee847 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -26,6 +26,7 @@
 
 #include <mach/hardware.h>
 #include <mach/cputype.h>
+#include <mach/common.h>
 #include <asm/mach/irq.h>
 
 #define IRQ_BIT(irq)		((irq) & 0x1f)
@@ -41,18 +42,14 @@
 #define IRQ_INTPRI0_REG_OFFSET	0x0030
 #define IRQ_INTPRI7_REG_OFFSET	0x004C
 
-const u8 *davinci_def_priorities;
-
-#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
-
 static inline unsigned int davinci_irq_readl(int offset)
 {
-	return __raw_readl(INTC_BASE + offset);
+	return __raw_readl(davinci_intc_base + offset);
 }
 
 static inline void davinci_irq_writel(unsigned long value, int offset)
 {
-	__raw_writel(value, INTC_BASE + offset);
+	__raw_writel(value, davinci_intc_base + offset);
 }
 
 /* Disable interrupt */
@@ -113,217 +110,11 @@ static struct irq_chip davinci_irq_chip_0 = {
 	.unmask = davinci_unmask_irq,
 };
 
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
-	[IRQ_VDINT0]		= 2,
-	[IRQ_VDINT1]		= 6,
-	[IRQ_VDINT2]		= 6,
-	[IRQ_HISTINT]		= 6,
-	[IRQ_H3AINT]		= 6,
-	[IRQ_PRVUINT]		= 6,
-	[IRQ_RSZINT]		= 6,
-	[7]			= 7,
-	[IRQ_VENCINT]		= 6,
-	[IRQ_ASQINT]		= 6,
-	[IRQ_IMXINT]		= 6,
-	[IRQ_VLCDINT]		= 6,
-	[IRQ_USBINT]		= 4,
-	[IRQ_EMACINT]		= 4,
-	[14]			= 7,
-	[15]			= 7,
-	[IRQ_CCINT0]		= 5,	/* dma */
-	[IRQ_CCERRINT]		= 5,	/* dma */
-	[IRQ_TCERRINT0]		= 5,	/* dma */
-	[IRQ_TCERRINT]		= 5,	/* dma */
-	[IRQ_PSCIN]		= 7,
-	[21]			= 7,
-	[IRQ_IDE]		= 4,
-	[23]			= 7,
-	[IRQ_MBXINT]		= 7,
-	[IRQ_MBRINT]		= 7,
-	[IRQ_MMCINT]		= 7,
-	[IRQ_SDIOINT]		= 7,
-	[28]			= 7,
-	[IRQ_DDRINT]		= 7,
-	[IRQ_AEMIFINT]		= 7,
-	[IRQ_VLQINT]		= 4,
-	[IRQ_TINT0_TINT12]	= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]	= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]	= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]	= 7,	/* system tick */
-	[IRQ_PWMINT0]		= 7,
-	[IRQ_PWMINT1]		= 7,
-	[IRQ_PWMINT2]		= 7,
-	[IRQ_I2C]		= 3,
-	[IRQ_UARTINT0]		= 3,
-	[IRQ_UARTINT1]		= 3,
-	[IRQ_UARTINT2]		= 3,
-	[IRQ_SPINT0]		= 3,
-	[IRQ_SPINT1]		= 3,
-	[45]			= 7,
-	[IRQ_DSP2ARM0]		= 4,
-	[IRQ_DSP2ARM1]		= 4,
-	[IRQ_GPIO0]		= 7,
-	[IRQ_GPIO1]		= 7,
-	[IRQ_GPIO2]		= 7,
-	[IRQ_GPIO3]		= 7,
-	[IRQ_GPIO4]		= 7,
-	[IRQ_GPIO5]		= 7,
-	[IRQ_GPIO6]		= 7,
-	[IRQ_GPIO7]		= 7,
-	[IRQ_GPIOBNK0]		= 7,
-	[IRQ_GPIOBNK1]		= 7,
-	[IRQ_GPIOBNK2]		= 7,
-	[IRQ_GPIOBNK3]		= 7,
-	[IRQ_GPIOBNK4]		= 7,
-	[IRQ_COMMTX]		= 7,
-	[IRQ_COMMRX]		= 7,
-	[IRQ_EMUINT]		= 7,
-};
-
-static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM646X_VP_VERTINT0]        = 7,
-	[IRQ_DM646X_VP_VERTINT1]        = 7,
-	[IRQ_DM646X_VP_VERTINT2]        = 7,
-	[IRQ_DM646X_VP_VERTINT3]        = 7,
-	[IRQ_DM646X_VP_ERRINT]          = 7,
-	[IRQ_DM646X_RESERVED_1]         = 7,
-	[IRQ_DM646X_RESERVED_2]         = 7,
-	[IRQ_DM646X_WDINT]              = 7,
-	[IRQ_DM646X_CRGENINT0]          = 7,
-	[IRQ_DM646X_CRGENINT1]          = 7,
-	[IRQ_DM646X_TSIFINT0]           = 7,
-	[IRQ_DM646X_TSIFINT1]           = 7,
-	[IRQ_DM646X_VDCEINT]            = 7,
-	[IRQ_DM646X_USBINT]             = 7,
-	[IRQ_DM646X_USBDMAINT]          = 7,
-	[IRQ_DM646X_PCIINT]             = 7,
-	[IRQ_CCINT0]                    = 7,    /* dma */
-	[IRQ_CCERRINT]                  = 7,    /* dma */
-	[IRQ_TCERRINT0]                 = 7,    /* dma */
-	[IRQ_TCERRINT]                  = 7,    /* dma */
-	[IRQ_DM646X_TCERRINT2]          = 7,
-	[IRQ_DM646X_TCERRINT3]          = 7,
-	[IRQ_DM646X_IDE]                = 7,
-	[IRQ_DM646X_HPIINT]             = 7,
-	[IRQ_DM646X_EMACRXTHINT]        = 7,
-	[IRQ_DM646X_EMACRXINT]          = 7,
-	[IRQ_DM646X_EMACTXINT]          = 7,
-	[IRQ_DM646X_EMACMISCINT]        = 7,
-	[IRQ_DM646X_MCASP0TXINT]        = 7,
-	[IRQ_DM646X_MCASP0RXINT]        = 7,
-	[IRQ_AEMIFINT]                  = 7,
-	[IRQ_DM646X_RESERVED_3]         = 7,
-	[IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
-	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
-	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
-	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
-	[IRQ_PWMINT0]                   = 7,
-	[IRQ_PWMINT1]                   = 7,
-	[IRQ_DM646X_VLQINT]             = 7,
-	[IRQ_I2C]                       = 7,
-	[IRQ_UARTINT0]                  = 7,
-	[IRQ_UARTINT1]                  = 7,
-	[IRQ_DM646X_UARTINT2]           = 7,
-	[IRQ_DM646X_SPINT0]             = 7,
-	[IRQ_DM646X_SPINT1]             = 7,
-	[IRQ_DM646X_DSP2ARMINT]         = 7,
-	[IRQ_DM646X_RESERVED_4]         = 7,
-	[IRQ_DM646X_PSCINT]             = 7,
-	[IRQ_DM646X_GPIO0]              = 7,
-	[IRQ_DM646X_GPIO1]              = 7,
-	[IRQ_DM646X_GPIO2]              = 7,
-	[IRQ_DM646X_GPIO3]              = 7,
-	[IRQ_DM646X_GPIO4]              = 7,
-	[IRQ_DM646X_GPIO5]              = 7,
-	[IRQ_DM646X_GPIO6]              = 7,
-	[IRQ_DM646X_GPIO7]              = 7,
-	[IRQ_DM646X_GPIOBNK0]           = 7,
-	[IRQ_DM646X_GPIOBNK1]           = 7,
-	[IRQ_DM646X_GPIOBNK2]           = 7,
-	[IRQ_DM646X_DDRINT]             = 7,
-	[IRQ_DM646X_AEMIFINT]           = 7,
-	[IRQ_COMMTX]                    = 7,
-	[IRQ_COMMRX]                    = 7,
-	[IRQ_EMUINT]                    = 7,
-};
-
-static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM355_CCDC_VDINT0]		= 2,
-	[IRQ_DM355_CCDC_VDINT1]		= 6,
-	[IRQ_DM355_CCDC_VDINT2]		= 6,
-	[IRQ_DM355_IPIPE_HST]		= 6,
-	[IRQ_DM355_H3AINT]		= 6,
-	[IRQ_DM355_IPIPE_SDR]		= 6,
-	[IRQ_DM355_IPIPEIFINT]		= 6,
-	[IRQ_DM355_OSDINT]		= 7,
-	[IRQ_DM355_VENCINT]		= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM355_RTOINT]		= 4,
-	[IRQ_DM355_UARTINT2]		= 7,
-	[IRQ_DM355_TINT6]		= 7,
-	[IRQ_CCINT0]			= 5,	/* dma */
-	[IRQ_CCERRINT]			= 5,	/* dma */
-	[IRQ_TCERRINT0]			= 5,	/* dma */
-	[IRQ_TCERRINT]			= 5,	/* dma */
-	[IRQ_DM355_SPINT2_1]		= 7,
-	[IRQ_DM355_TINT7]		= 4,
-	[IRQ_DM355_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM355_MMCINT1]		= 7,
-	[IRQ_DM355_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 7,
-	[IRQ_AEMIFINT]			= 7,
-	[IRQ_DM355_SDIOINT1]		= 4,
-	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 7,
-	[IRQ_PWMINT2]			= 7,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM355_SPINT0_0]		= 3,
-	[IRQ_DM355_SPINT0_1]		= 3,
-	[IRQ_DM355_GPIO0]		= 3,
-	[IRQ_DM355_GPIO1]		= 7,
-	[IRQ_DM355_GPIO2]		= 4,
-	[IRQ_DM355_GPIO3]		= 4,
-	[IRQ_DM355_GPIO4]		= 7,
-	[IRQ_DM355_GPIO5]		= 7,
-	[IRQ_DM355_GPIO6]		= 7,
-	[IRQ_DM355_GPIO7]		= 7,
-	[IRQ_DM355_GPIO8]		= 7,
-	[IRQ_DM355_GPIO9]		= 7,
-	[IRQ_DM355_GPIOBNK0]		= 7,
-	[IRQ_DM355_GPIOBNK1]		= 7,
-	[IRQ_DM355_GPIOBNK2]		= 7,
-	[IRQ_DM355_GPIOBNK3]		= 7,
-	[IRQ_DM355_GPIOBNK4]		= 7,
-	[IRQ_DM355_GPIOBNK5]		= 7,
-	[IRQ_DM355_GPIOBNK6]		= 7,
-	[IRQ_COMMTX]			= 7,
-	[IRQ_COMMRX]			= 7,
-	[IRQ_EMUINT]			= 7,
-};
-
 /* ARM Interrupt Controller Initialization */
 void __init davinci_irq_init(void)
 {
 	unsigned i;
-
-	if (cpu_is_davinci_dm644x())
-		davinci_def_priorities = dm644x_default_priorities;
-	else if (cpu_is_davinci_dm646x())
-		davinci_def_priorities = dm646x_default_priorities;
-	else if (cpu_is_davinci_dm355())
-		davinci_def_priorities = dm355_default_priorities;
+	const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios;
 
 	/* Clear all interrupt requests */
 	davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index bbba0b247a4..d310f579aa8 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -21,18 +21,7 @@
 
 #include <mach/hardware.h>
 #include <mach/mux.h>
-
-static const struct mux_config *mux_table;
-static unsigned long pin_table_sz;
-
-int __init davinci_mux_register(const struct mux_config *pins,
-				unsigned long size)
-{
-	mux_table = pins;
-	pin_table_sz = size;
-
-	return 0;
-}
+#include <mach/common.h>
 
 /*
  * Sets the DAVINCI MUX register based on the table
@@ -40,23 +29,24 @@ int __init davinci_mux_register(const struct mux_config *pins,
 int __init_or_module davinci_cfg_reg(const unsigned long index)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
-	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	void __iomem *base = soc_info->pinmux_base;
 	unsigned long flags;
 	const struct mux_config *cfg;
 	unsigned int reg_orig = 0, reg = 0;
 	unsigned int mask, warn = 0;
 
-	if (!mux_table)
+	if (!soc_info->pinmux_pins)
 		BUG();
 
-	if (index >= pin_table_sz) {
+	if (index >= soc_info->pinmux_pins_num) {
 		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
-		       index, pin_table_sz);
+		       index, soc_info->pinmux_pins_num);
 		dump_stack();
 		return -ENODEV;
 	}
 
-	cfg = &mux_table[index];
+	cfg = &soc_info->pinmux_pins[index];
 
 	if (cfg->name == NULL) {
 		printk(KERN_ERR "No entry for the specified index\n");
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 84171abf5f7..a78b657e916 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -28,8 +28,6 @@
 #include <mach/psc.h>
 #include <mach/mux.h>
 
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
-
 /* PSC register offsets */
 #define EPCPR		0x070
 #define PTCMD		0x120
@@ -42,22 +40,42 @@
 #define MDSTAT_STATE_MASK 0x1f
 
 /* Return nonzero iff the domain's clock is active */
-int __init davinci_psc_is_clk_active(unsigned int id)
+int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 {
-	void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
-	u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+	void __iomem *psc_base;
+	u32 mdstat;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+				(int)soc_info->psc_bases, ctlr);
+		return 0;
+	}
+
+	psc_base = soc_info->psc_bases[ctlr];
+	mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
 
 	/* if clocked, state can be "Enable" or "SyncReset" */
 	return mdstat & BIT(12);
 }
 
 /* Enable or disable a PSC domain */
-void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
+void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+		unsigned int id, char enable)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
-	void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+	void __iomem *psc_base;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
 
+	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+				(int)soc_info->psc_bases, ctlr);
+		return;
+	}
+
+	psc_base = soc_info->psc_bases[ctlr];
+
 	mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
 	mdctl &= ~MDSTAT_STATE_MASK;
 	mdctl |= next_state;
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 69507579652..c530c7333d0 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -33,6 +33,8 @@
 #include <mach/serial.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
+#include <mach/common.h>
+
 #include "clock.h"
 
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
@@ -49,44 +51,6 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
 	__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
 }
 
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= IRQ_UARTINT0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= IRQ_UARTINT1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART2_BASE,
-		.irq		= IRQ_UARTINT2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags		= 0
-	},
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
 static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 {
 	unsigned int pwremu = 0;
@@ -106,35 +70,22 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 				 UART_DM646X_SCR_TX_WATERMARK);
 }
 
-void __init davinci_serial_init(struct davinci_uart_config *info)
+int __init davinci_serial_init(struct davinci_uart_config *info)
 {
 	int i;
 	char name[16];
 	struct clk *uart_clk;
-	struct device *dev = &serial_device.dev;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct device *dev = &soc_info->serial_dev->dev;
+	struct plat_serial8250_port *p = dev->platform_data;
 
 	/*
 	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on
-	 * if not needed.
+	 * You have to mux them off in device drivers later on if not needed.
 	 */
-	for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
-		struct plat_serial8250_port *p = serial_platform_data + i;
-
-		if (!(info->enabled_uarts & (1 << i))) {
-			p->flags = 0;
+	for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) {
+		if (!(info->enabled_uarts & (1 << i)))
 			continue;
-		}
-
-		if (cpu_is_davinci_dm646x())
-			p->iotype = UPIO_MEM32;
-
-		if (cpu_is_davinci_dm355()) {
-			if (i == 2) {
-				p->mapbase = (unsigned long)DM355_UART2_BASE;
-				p->irq = IRQ_DM355_UARTINT2;
-			}
-		}
 
 		sprintf(name, "uart%d", i);
 		uart_clk = clk_get(dev, name);
@@ -147,11 +98,6 @@ void __init davinci_serial_init(struct davinci_uart_config *info)
 			davinci_serial_reset(p);
 		}
 	}
-}
 
-static int __init davinci_init(void)
-{
-	return platform_device_register(&serial_device);
+	return platform_device_register(soc_info->serial_dev);
 }
-
-arch_initcall(davinci_init);
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
new file mode 100644
index 00000000000..db54b2a66b4
--- /dev/null
+++ b/arch/arm/mach-davinci/sram.c
@@ -0,0 +1,74 @@
+/*
+ * mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/genalloc.h>
+
+#include <mach/common.h>
+#include <mach/memory.h>
+#include <mach/sram.h>
+
+
+static struct gen_pool *sram_pool;
+
+void *sram_alloc(size_t len, dma_addr_t *dma)
+{
+	unsigned long vaddr;
+	dma_addr_t dma_base = davinci_soc_info.sram_dma;
+
+	if (dma)
+		*dma = 0;
+	if (!sram_pool || (dma && !dma_base))
+		return NULL;
+
+	vaddr = gen_pool_alloc(sram_pool, len);
+	if (!vaddr)
+		return NULL;
+
+	if (dma)
+		*dma = dma_base + (vaddr - SRAM_VIRT);
+	return (void *)vaddr;
+
+}
+EXPORT_SYMBOL(sram_alloc);
+
+void sram_free(void *addr, size_t len)
+{
+	gen_pool_free(sram_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(sram_free);
+
+
+/*
+ * REVISIT This supports CPU and DMA access to/from SRAM, but it
+ * doesn't (yet?) support some other notable uses of SRAM:  as TCM
+ * for data and/or instructions; and holding code needed to enter
+ * and exit suspend states (while DRAM can't be used).
+ */
+static int __init sram_init(void)
+{
+	unsigned len = davinci_soc_info.sram_len;
+	int status = 0;
+
+	if (len) {
+		len = min(len, SRAM_SIZE);
+		sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
+		if (!sram_pool)
+			status = -ENOMEM;
+	}
+	if (sram_pool)
+		status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1);
+	WARN_ON(status < 0);
+	return status;
+}
+core_initcall(sram_init);
+
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 494e01bff5c..0884ca57bfb 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <mach/hardware.h>
 #include <asm/system.h>
@@ -28,52 +29,41 @@
 #include <asm/errno.h>
 #include <mach/io.h>
 #include <mach/cputype.h>
+#include <mach/time.h>
 #include "clock.h"
 
 static struct clock_event_device clockevent_davinci;
 static unsigned int davinci_clock_tick_rate;
 
-#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
-#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
-#define DAVINCI_WDOG_BASE   (IO_PHYS + 0x21C00)
-
-enum {
-	T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS,
-};
-
-#define IS_TIMER1(id)    (id & 0x2)
-#define IS_TIMER0(id)    (!IS_TIMER1(id))
-#define IS_TIMER_TOP(id) ((id & 0x1))
-#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
-
-static int timer_irqs[NUM_TIMERS] = {
-	IRQ_TINT0_TINT12,
-	IRQ_TINT0_TINT34,
-	IRQ_TINT1_TINT12,
-	IRQ_TINT1_TINT34,
-};
-
 /*
  * This driver configures the 2 64-bit count-up timers as 4 independent
  * 32-bit count-up timers used as follows:
- *
- * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
- * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top   :  <unused>
  */
-#define TID_CLOCKEVENT  T0_BOT
-#define TID_CLOCKSOURCE T0_TOP
+
+enum {
+	TID_CLOCKEVENT,
+	TID_CLOCKSOURCE,
+};
 
 /* Timer register offsets */
-#define PID12                        0x0
-#define TIM12                        0x10
-#define TIM34                        0x14
-#define PRD12                        0x18
-#define PRD34                        0x1c
-#define TCR                          0x20
-#define TGCR                         0x24
-#define WDTCR                        0x28
+#define PID12			0x0
+#define TIM12			0x10
+#define TIM34			0x14
+#define PRD12			0x18
+#define PRD34			0x1c
+#define TCR			0x20
+#define TGCR			0x24
+#define WDTCR			0x28
+
+/* Offsets of the 8 compare registers */
+#define	CMP12_0			0x60
+#define	CMP12_1			0x64
+#define	CMP12_2			0x68
+#define	CMP12_3			0x6c
+#define	CMP12_4			0x70
+#define	CMP12_5			0x74
+#define	CMP12_6			0x78
+#define	CMP12_7			0x7c
 
 /* Timer register bitfields */
 #define TCR_ENAMODE_DISABLE          0x0
@@ -105,6 +95,7 @@ struct timer_s {
 	unsigned int id;
 	unsigned long period;
 	unsigned long opts;
+	unsigned long flags;
 	void __iomem *base;
 	unsigned long tim_off;
 	unsigned long prd_off;
@@ -114,30 +105,58 @@ struct timer_s {
 static struct timer_s timers[];
 
 /* values for 'opts' field of struct timer_s */
-#define TIMER_OPTS_DISABLED   0x00
-#define TIMER_OPTS_ONESHOT    0x01
-#define TIMER_OPTS_PERIODIC   0x02
+#define TIMER_OPTS_DISABLED		0x01
+#define TIMER_OPTS_ONESHOT		0x02
+#define TIMER_OPTS_PERIODIC		0x04
+#define TIMER_OPTS_STATE_MASK		0x07
+
+#define TIMER_OPTS_USE_COMPARE		0x80000000
+#define USING_COMPARE(t)		((t)->opts & TIMER_OPTS_USE_COMPARE)
+
+static char *id_to_name[] = {
+	[T0_BOT]	= "timer0_0",
+	[T0_TOP]	= "timer0_1",
+	[T1_BOT]	= "timer1_0",
+	[T1_TOP]	= "timer1_1",
+};
 
 static int timer32_config(struct timer_s *t)
 {
-	u32 tcr = __raw_readl(t->base + TCR);
-
-	/* disable timer */
-	tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
-	__raw_writel(tcr, t->base + TCR);
-
-	/* reset counter to zero, set new period */
-	__raw_writel(0, t->base + t->tim_off);
-	__raw_writel(t->period, t->base + t->prd_off);
-
-	/* Set enable mode */
-	if (t->opts & TIMER_OPTS_ONESHOT) {
-		tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
-	} else if (t->opts & TIMER_OPTS_PERIODIC) {
-		tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+	u32 tcr;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	if (USING_COMPARE(t)) {
+		struct davinci_timer_instance *dtip =
+				soc_info->timer_info->timers;
+		int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id);
+
+		/*
+		 * Next interrupt should be the current time reg value plus
+		 * the new period (using 32-bit unsigned addition/wrapping
+		 * to 0 on overflow).  This assumes that the clocksource
+		 * is setup to count to 2^32-1 before wrapping around to 0.
+		 */
+		__raw_writel(__raw_readl(t->base + t->tim_off) + t->period,
+			t->base + dtip[event_timer].cmp_off);
+	} else {
+		tcr = __raw_readl(t->base + TCR);
+
+		/* disable timer */
+		tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
+		__raw_writel(tcr, t->base + TCR);
+
+		/* reset counter to zero, set new period */
+		__raw_writel(0, t->base + t->tim_off);
+		__raw_writel(t->period, t->base + t->prd_off);
+
+		/* Set enable mode */
+		if (t->opts & TIMER_OPTS_ONESHOT)
+			tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
+		else if (t->opts & TIMER_OPTS_PERIODIC)
+			tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+
+		__raw_writel(tcr, t->base + TCR);
 	}
-
-	__raw_writel(tcr, t->base + TCR);
 	return 0;
 }
 
@@ -182,13 +201,14 @@ static struct timer_s timers[] = {
 
 static void __init timer_init(void)
 {
-	u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
 	int i;
 
 	/* Global init of each 64-bit timer as a whole */
 	for(i=0; i<2; i++) {
 		u32 tgcr;
-		void __iomem *base = IO_ADDRESS(phys_bases[i]);
+		void __iomem *base = dtip[i].base;
 
 		/* Disabled, Internal clock source */
 		__raw_writel(0, base + TCR);
@@ -214,33 +234,33 @@ static void __init timer_init(void)
 	/* Init of each timer as a 32-bit timer */
 	for (i=0; i< ARRAY_SIZE(timers); i++) {
 		struct timer_s *t = &timers[i];
-		u32 phys_base;
-
-		if (t->name) {
-			t->id = i;
-			phys_base = (IS_TIMER1(t->id) ?
-			       DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
-			t->base = IO_ADDRESS(phys_base);
-
-			if (IS_TIMER_BOT(t->id)) {
-				t->enamode_shift = 6;
-				t->tim_off = TIM12;
-				t->prd_off = PRD12;
-			} else {
-				t->enamode_shift = 22;
-				t->tim_off = TIM34;
-				t->prd_off = PRD34;
-			}
-
-			/* Register interrupt */
-			t->irqaction.name = t->name;
-			t->irqaction.dev_id = (void *)t;
-			if (t->irqaction.handler != NULL) {
-				setup_irq(timer_irqs[t->id], &t->irqaction);
-			}
-
-			timer32_config(&timers[i]);
+		int timer = ID_TO_TIMER(t->id);
+		u32 irq;
+
+		t->base = dtip[timer].base;
+
+		if (IS_TIMER_BOT(t->id)) {
+			t->enamode_shift = 6;
+			t->tim_off = TIM12;
+			t->prd_off = PRD12;
+			irq = dtip[timer].bottom_irq;
+		} else {
+			t->enamode_shift = 22;
+			t->tim_off = TIM34;
+			t->prd_off = PRD34;
+			irq = dtip[timer].top_irq;
+		}
+
+		/* Register interrupt */
+		t->irqaction.name = t->name;
+		t->irqaction.dev_id = (void *)t;
+
+		if (t->irqaction.handler != NULL) {
+			irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
+			setup_irq(irq, &t->irqaction);
 		}
+
+		timer32_config(&timers[i]);
 	}
 }
 
@@ -255,7 +275,6 @@ static cycle_t read_cycles(struct clocksource *cs)
 }
 
 static struct clocksource clocksource_davinci = {
-	.name		= "timer0_1",
 	.rating		= 300,
 	.read		= read_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
@@ -284,15 +303,18 @@ static void davinci_set_mode(enum clock_event_mode mode,
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		t->period = davinci_clock_tick_rate / (HZ);
-		t->opts = TIMER_OPTS_PERIODIC;
+		t->opts &= ~TIMER_OPTS_STATE_MASK;
+		t->opts |= TIMER_OPTS_PERIODIC;
 		timer32_config(t);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
-		t->opts = TIMER_OPTS_ONESHOT;
+		t->opts &= ~TIMER_OPTS_STATE_MASK;
+		t->opts |= TIMER_OPTS_ONESHOT;
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		t->opts = TIMER_OPTS_DISABLED;
+		t->opts &= ~TIMER_OPTS_STATE_MASK;
+		t->opts |= TIMER_OPTS_DISABLED;
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		break;
@@ -300,7 +322,6 @@ static void davinci_set_mode(enum clock_event_mode mode,
 }
 
 static struct clock_event_device clockevent_davinci = {
-	.name		= "timer0_0",
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
 	.set_next_event	= davinci_set_next_event,
@@ -311,10 +332,42 @@ static struct clock_event_device clockevent_davinci = {
 static void __init davinci_timer_init(void)
 {
 	struct clk *timer_clk;
-
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	unsigned int clockevent_id;
+	unsigned int clocksource_id;
 	static char err[] __initdata = KERN_ERR
 		"%s: can't register clocksource!\n";
 
+	clockevent_id = soc_info->timer_info->clockevent_id;
+	clocksource_id = soc_info->timer_info->clocksource_id;
+
+	timers[TID_CLOCKEVENT].id = clockevent_id;
+	timers[TID_CLOCKSOURCE].id = clocksource_id;
+
+	/*
+	 * If using same timer for both clock events & clocksource,
+	 * a compare register must be used to generate an event interrupt.
+	 * This is equivalent to a oneshot timer only (not periodic).
+	 */
+	if (clockevent_id == clocksource_id) {
+		struct davinci_timer_instance *dtip =
+				soc_info->timer_info->timers;
+		int event_timer = ID_TO_TIMER(clockevent_id);
+
+		/* Only bottom timers can use compare regs */
+		if (IS_TIMER_TOP(clockevent_id))
+			pr_warning("davinci_timer_init: Invalid use"
+				" of system timers.  Results unpredictable.\n");
+		else if ((dtip[event_timer].cmp_off == 0)
+				|| (dtip[event_timer].cmp_irq == 0))
+			pr_warning("davinci_timer_init:  Invalid timer instance"
+				" setup.  Results unpredictable.\n");
+		else {
+			timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
+			clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
+		}
+	}
+
 	/* init timer hw */
 	timer_init();
 
@@ -325,6 +378,7 @@ static void __init davinci_timer_init(void)
 	davinci_clock_tick_rate = clk_get_rate(timer_clk);
 
 	/* setup clocksource */
+	clocksource_davinci.name = id_to_name[clocksource_id];
 	clocksource_davinci.mult =
 		clocksource_khz2mult(davinci_clock_tick_rate/1000,
 				     clocksource_davinci.shift);
@@ -332,12 +386,12 @@ static void __init davinci_timer_init(void)
 		printk(err, clocksource_davinci.name);
 
 	/* setup clockevent */
+	clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
 	clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
 					 clockevent_davinci.shift);
 	clockevent_davinci.max_delta_ns =
 		clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
-	clockevent_davinci.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_davinci);
+	clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
 
 	clockevent_davinci.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_davinci);
@@ -349,15 +403,14 @@ struct sys_timer davinci_timer = {
 
 
 /* reset board using watchdog timer */
-void davinci_watchdog_reset(void) {
+void davinci_watchdog_reset(void)
+{
 	u32 tgcr, wdtcr;
-	void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
-	struct device dev;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	void __iomem *base = soc_info->wdt_base;
 	struct clk *wd_clk;
-	char *name = "watchdog";
 
-	dev_set_name(&dev, name);
-	wd_clk = clk_get(&dev, NULL);
+	wd_clk = clk_get(&davinci_wdt_device.dev, NULL);
 	if (WARN_ON(IS_ERR(wd_clk)))
 		return;
 	clk_enable(wd_clk);
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 56bddcef690..d7291c682a6 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -9,87 +9,135 @@ config CRUNCH
 
 comment "EP93xx Platforms"
 
+choice
+	prompt "EP93xx first SDRAM bank selection"
+	default EP93XX_SDCE3_SYNC_PHYS_OFFSET
+
+config EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	bool "0x00000000 - SDCE3/SyncBoot"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0x00000000
+
+config EP93XX_SDCE0_PHYS_OFFSET
+	bool "0xc0000000 - SDCEO"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xc0000000
+
+endchoice
+
 config MACH_ADSSPHERE
 	bool "Support ADS Sphere"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the ADS
 	  Sphere board.
 
+config MACH_EDB93XX
+	bool
+
+config MACH_EDB9301
+	bool "Support Cirrus Logic EDB9301"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9301 Evaluation Board.
+
 config MACH_EDB9302
 	bool "Support Cirrus Logic EDB9302"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302 Evaluation Board.
 
 config MACH_EDB9302A
 	bool "Support Cirrus Logic EDB9302A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302A Evaluation Board.
 
 config MACH_EDB9307
 	bool "Support Cirrus Logic EDB9307"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9307 Evaluation Board.
 
 config MACH_EDB9307A
 	bool "Support Cirrus Logic EDB9307A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9307A Evaluation Board.
 
 config MACH_EDB9312
 	bool "Support Cirrus Logic EDB9312"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9312 Evaluation Board.
 
 config MACH_EDB9315
 	bool "Support Cirrus Logic EDB9315"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315 Evaluation Board.
 
 config MACH_EDB9315A
 	bool "Support Cirrus Logic EDB9315A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315A Evaluation Board.
 
 config MACH_GESBC9312
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "Support Glomation GESBC-9312-sx"
 	help
 	  Say 'Y' here if you want your kernel to support the Glomation
 	  GESBC-9312-sx board.
 
 config MACH_MICRO9
-        bool
-        default n
+	bool
 
 config MACH_MICRO9H
-       bool "Support Contec Hypercontrol Micro9-H"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-H board.
+	bool "Support Contec Hypercontrol Micro9-H"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-H board.
 
 config MACH_MICRO9M
-       bool "Support Contec Hypercontrol Micro9-M"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-M board.
+	bool "Support Contec Hypercontrol Micro9-M"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-M board.
 
 config MACH_MICRO9L
-       bool "Support Contec Hypercontrol Micro9-L"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-L board.
+	bool "Support Contec Hypercontrol Micro9-L"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-L board.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-72xx board.
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 9522e205b73..eae6199a989 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -7,13 +7,7 @@ obj-n			:=
 obj-			:=
 
 obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
-obj-$(CONFIG_MACH_EDB9302)	+= edb9302.o
-obj-$(CONFIG_MACH_EDB9302A)	+= edb9302a.o
-obj-$(CONFIG_MACH_EDB9307)	+= edb9307.o
-obj-$(CONFIG_MACH_EDB9307A)	+= edb9307a.o
-obj-$(CONFIG_MACH_EDB9312)	+= edb9312.o
-obj-$(CONFIG_MACH_EDB9315)	+= edb9315.o
-obj-$(CONFIG_MACH_EDB9315A)	+= edb9315a.o
+obj-$(CONFIG_MACH_EDB93XX)	+= edb93xx.o
 obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
 obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index d5561ad15ba..27a085a8f12 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -1,2 +1,5 @@
-   zreladdr-y	:= 0x00008000
-params_phys-y	:= 0x00000100
+   zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00008000
+params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0008000
+params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index b2eede5531c..6c4c1633ed1 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -72,58 +72,58 @@ static struct clk clk_h;
 static struct clk clk_p;
 static struct clk clk_pll2;
 static struct clk clk_usb_host = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= EP93XX_SYSCON_CLOCK_USH_EN,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00020000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
 };
 static struct clk clk_m2p1 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00010000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
 };
 static struct clk clk_m2p2 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00080000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
 };
 static struct clk clk_m2p3 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00040000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
 };
 static struct clk clk_m2p4 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00200000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
 };
 static struct clk clk_m2p5 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00100000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
 };
 static struct clk clk_m2p6 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00800000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
 };
 static struct clk clk_m2p7 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00400000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
 };
 static struct clk clk_m2p8 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x02000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
 };
 static struct clk clk_m2p9 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x01000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
 };
 static struct clk clk_m2m0 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x04000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
 };
 static struct clk clk_m2m1 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x08000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
 };
 
 #define INIT_CK(dev,con,ck)					\
@@ -138,7 +138,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL, "hclk", &clk_h),
 	INIT_CK(NULL, "pclk", &clk_p),
 	INIT_CK(NULL, "pll2", &clk_pll2),
-	INIT_CK(NULL, "usb_host", &clk_usb_host),
+	INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
 	INIT_CK(NULL, "m2p0", &clk_m2p0),
 	INIT_CK(NULL, "m2p1", &clk_m2p1),
 	INIT_CK(NULL, "m2p2", &clk_m2p2),
@@ -186,8 +186,8 @@ static unsigned long get_uart_rate(struct clk *clk)
 {
 	u32 value;
 
-	value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
-	if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
+	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
+	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
 		return EP93XX_EXT_CLK_RATE;
 	else
 		return EP93XX_EXT_CLK_RATE / 2;
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ae24486f858..204dc5cbd0b 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -155,7 +155,7 @@ static unsigned char gpio_int_unmasked[3];
 static unsigned char gpio_int_enabled[3];
 static unsigned char gpio_int_type1[3];
 static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debouce[3];
+static unsigned char gpio_int_debounce[3];
 
 /* Port ordering is: A B F */
 static const u8 int_type1_register_offset[3]	= { 0x90, 0xac, 0x4c };
@@ -192,11 +192,11 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
 	int port_mask = 1 << (line & 7);
 
 	if (enable)
-		gpio_int_debouce[port] |= port_mask;
+		gpio_int_debounce[port] |= port_mask;
 	else
-		gpio_int_debouce[port] &= ~port_mask;
+		gpio_int_debounce[port] &= ~port_mask;
 
-	__raw_writeb(gpio_int_debouce[port],
+	__raw_writeb(gpio_int_debounce[port],
 		EP93XX_GPIO_REG(int_debounce_register_offset[port]));
 }
 EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
@@ -362,8 +362,8 @@ void __init ep93xx_init_irq(void)
 {
 	int gpio_irq;
 
-	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
-	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
+	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 
 	for (gpio_irq = gpio_to_irq(0);
 	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
@@ -450,10 +450,19 @@ static struct amba_device uart3_device = {
 };
 
 
+static struct resource ep93xx_rtc_resource[] = {
+	{
+		.start		= EP93XX_RTC_PHYS_BASE,
+		.end		= EP93XX_RTC_PHYS_BASE + 0x10c - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
 static struct platform_device ep93xx_rtc_device = {
-       .name           = "ep93xx-rtc",
-       .id             = -1,
-       .num_resources  = 0,
+	.name		= "ep93xx-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_rtc_resource),
+	.resource	= ep93xx_rtc_resource,
 };
 
 
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
deleted file mode 100644
index 8bf8d7c78f1..00000000000
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9302.c
- * Cirrus Logic EDB9302 support.
- *
- * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9302_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9302_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9302_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9302_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9302_flash);
-
-	ep93xx_register_eth(&edb9302_eth_data, 1);
-}
-
-MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
-	/* Maintainer: George Kashperko <george@chas.com.ua> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9302_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
deleted file mode 100644
index a352c57c7b4..00000000000
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9302a.c
- * Cirrus Logic EDB9302A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302a_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9302a_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302a_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9302a_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9302a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302a_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9302a_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9302a_flash);
-
-	ep93xx_register_eth(&edb9302a_eth_data, 1);
-}
-
-MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9302a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
deleted file mode 100644
index 5ab22f63a4e..00000000000
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9307.c
- * Cirrus Logic EDB9307 support.
- *
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307_flash_data = {
-	.width		= 4,
-};
-
-static struct resource edb9307_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9307_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9307_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9307_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9307_flash);
-
-	ep93xx_register_eth(&edb9307_eth_data, 1);
-}
-
-MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
-	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9307_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c
deleted file mode 100644
index 6171167d331..00000000000
--- a/arch/arm/mach-ep93xx/edb9307a.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9307a.c
- * Cirrus Logic EDB9307A support.
- *
- * Copyright (C) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307a_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9307a_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307a_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9307a_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9307a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307a_eth_data = {
-	.phy_id		= 1,
-};
-
-static struct i2c_board_info __initdata edb9307a_i2c_data[] = {
-	{
-		/* On-board battery backed RTC */
-		I2C_BOARD_INFO("isl1208", 0x6f),
-	},
-	/*
-	 * The I2C signals are also routed to the Expansion Connector (J4)
-	 */
-};
-
-static void __init edb9307a_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9307a_flash);
-
-	ep93xx_register_eth(&edb9307a_eth_data, 1);
-
-	ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data));
-}
-
-MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9307a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
deleted file mode 100644
index d7179f66d80..00000000000
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9312.c
- * Cirrus Logic EDB9312 support.
- *
- * Copyright (C) 2006 Infosys Technologies Limited
- * 	Toufeeq Hussain	<toufeeq_hussain@infosys.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9312_flash_data = {
-	.width		= 4,
-};
-
-static struct resource edb9312_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9312_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9312_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9312_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9312_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9312_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9312_flash);
-
-	ep93xx_register_eth(&edb9312_eth_data, 1);
-}
-
-MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
-	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9312_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
deleted file mode 100644
index 025af6eaca1..00000000000
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9315.c
- * Cirrus Logic EDB9315 support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315_flash_data = {
-	.width		= 4,
-};
-
-static struct resource edb9315_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9315_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9315_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9315_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9315_flash);
-
-	ep93xx_register_eth(&edb9315_eth_data, 1);
-}
-
-MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9315_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
deleted file mode 100644
index 4c9cc8a39f5..00000000000
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9315a.c
- * Cirrus Logic EDB9315A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315a_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9315a_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315a_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9315a_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9315a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315a_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9315a_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9315a_flash);
-
-	ep93xx_register_eth(&edb9315a_eth_data, 1);
-}
-
-MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9315a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
new file mode 100644
index 00000000000..e9e45b92457
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -0,0 +1,217 @@
+/*
+ * arch/arm/mach-ep93xx/edb93xx.c
+ * Cirrus Logic EDB93xx Development Board support.
+ *
+ * EDB93XX, EDB9301, EDB9307A
+ * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * EDB9302
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * EDB9302A, EDB9315, EDB9315A
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * EDB9307
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * EDB9312
+ * Copyright (C) 2006 Infosys Technologies Limited
+ *                    Toufeeq Hussain <toufeeq_hussain@infosys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb93xx_flash_data;
+
+static struct resource edb93xx_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb93xx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb93xx_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb93xx_flash_resource,
+};
+
+static void __init __edb93xx_register_flash(unsigned int width,
+			resource_size_t start, resource_size_t size)
+{
+	edb93xx_flash_data.width	= width;
+	edb93xx_flash_resource.start	= start;
+	edb93xx_flash_resource.end	= start + size - 1;
+
+	platform_device_register(&edb93xx_flash);
+}
+
+static void __init edb93xx_register_flash(void)
+{
+	if (machine_is_edb9307() || machine_is_edb9312() ||
+	    machine_is_edb9315()) {
+		__edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+	} else {
+		__edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+	}
+}
+
+static struct ep93xx_eth_data edb93xx_eth_data = {
+	.phy_id		= 1,
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+	{
+		I2C_BOARD_INFO("isl1208", 0x6f),
+	},
+};
+
+static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+};
+
+static void __init edb93xx_register_i2c(void)
+{
+	if (machine_is_edb9302a() || machine_is_edb9307a() ||
+	    machine_is_edb9315a()) {
+		ep93xx_register_i2c(edb93xxa_i2c_data,
+				ARRAY_SIZE(edb93xxa_i2c_data));
+	} else if (machine_is_edb9307() || machine_is_edb9312() ||
+		   machine_is_edb9315()) {
+		ep93xx_register_i2c(edb93xx_i2c_data,
+				ARRAY_SIZE(edb93xx_i2c_data));
+	}
+}
+
+static void __init edb93xx_init_machine(void)
+{
+	ep93xx_init_devices();
+	edb93xx_register_flash();
+	ep93xx_register_eth(&edb93xx_eth_data, 1);
+	edb93xx_register_i2c();
+}
+
+
+#ifdef CONFIG_MACH_EDB9301
+MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+	/* Maintainer: George Kashperko <george@chas.com.ua> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302A
+MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307
+MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
+	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307A
+MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9312
+MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
+	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315
+MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315A
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 1732de7629a..967c079180d 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -147,13 +147,27 @@
 #define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
 
 #define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
 
 #define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
 #define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
 #define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_CLOCK_CONTROL	EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_CLOCK_UARTBAUD	0x20000000
-#define EP93XX_SYSCON_CLOCK_USH_EN	0x10000000
+#define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_PWRCNT_FIR_EN	(1<<31)
+#define EP93XX_SYSCON_PWRCNT_UARTBAUD	(1<<29)
+#define EP93XX_SYSCON_PWRCNT_USH_EN	(1<<28)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M1	(1<<27)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M0	(1<<26)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P8	(1<<25)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P9	(1<<24)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P6	(1<<23)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P7	(1<<22)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P4	(1<<21)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P5	(1<<20)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P2	(1<<19)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P3	(1<<18)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P0	(1<<17)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P1	(1<<16)
 #define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
 #define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 5c80c3c8158..925b12ea099 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -5,6 +5,12 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
+#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
 #define PHYS_OFFSET		UL(0x00000000)
+#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xc0000000)
+#else
+#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
+#endif
 
 #endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
deleted file mode 100644
index cddd194ac6e..00000000000
--- a/arch/arm/mach-imx/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-menu "IMX Implementations"
-	depends on ARCH_IMX
-
-config ARCH_MX1ADS
-	bool "mx1ads"
-	depends on ARCH_IMX
-	select ISA
-	help
-	  Say Y here if you are using the Motorola MX1ADS board
-
-endmenu
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
deleted file mode 100644
index b047c7e795a..00000000000
--- a/arch/arm/mach-imx/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			+= irq.o time.o dma.o generic.o clock.o
-
-obj-$(CONFIG_CPU_FREQ_IMX)	+= cpufreq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-
-# Support for blinky lights
-led-y := leds.o
-
-obj-$(CONFIG_LEDS)	+=  $(led-y)
-led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
deleted file mode 100644
index fd72ce5b808..00000000000
--- a/arch/arm/mach-imx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-    zreladdr-$(CONFIG_ARCH_MX1ADS)	:= 0x08008000
-
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
deleted file mode 100644
index cf332aeb942..00000000000
--- a/arch/arm/mach-imx/clock.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple approach: We can't disable clocks, so we do
- * not need refcounting
- */
-
-struct clk {
-	struct list_head node;
-	const char *name;
-	unsigned long (*get_rate)(void);
-};
-
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
-{
-	unsigned long long ll;
-	unsigned long quot;
-
-	u32 mfi = (pll >> 10) & 0xf;
-	u32 mfn = pll & 0x3ff;
-	u32 mfd = (pll >> 16) & 0x3ff;
-	u32 pd =  (pll >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	ll = 2 * (unsigned long long)f_ref *
-		((mfi << 16) + (mfn << 16) / (mfd + 1));
-	quot = (pd + 1) * (1 << 16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	return (unsigned long)ll;
-}
-
-static unsigned long imx_get_system_clk(void)
-{
-	u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
-	return imx_decode_pll(SPCTL0, f_ref);
-}
-
-static unsigned long imx_get_mcu_clk(void)
-{
-	return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-
-/*
- *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long imx_get_perclk1(void)
-{
-	return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-
-/*
- *  get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long imx_get_perclk2(void)
-{
-	return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-
-/*
- *  get peripheral clock 3 ( SSI )
- */
-static unsigned long imx_get_perclk3(void)
-{
-	return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-
-/*
- *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long imx_get_hclk(void)
-{
-	return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-
-static struct clk clk_system_clk = {
-	.name = "system_clk",
-	.get_rate = imx_get_system_clk,
-};
-
-static struct clk clk_hclk = {
-	.name = "hclk",
-	.get_rate = imx_get_hclk,
-};
-
-static struct clk clk_mcu_clk = {
-	.name = "mcu_clk",
-	.get_rate = imx_get_mcu_clk,
-};
-
-static struct clk clk_perclk1 = {
-	.name = "perclk1",
-	.get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_uart_clk = {
-	.name = "uart_clk",
-	.get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_perclk2 = {
-	.name = "perclk2",
-	.get_rate = imx_get_perclk2,
-};
-
-static struct clk clk_perclk3 = {
-	.name = "perclk3",
-	.get_rate = imx_get_perclk3,
-};
-
-static struct clk *clks[] = {
-	&clk_perclk1,
-	&clk_perclk2,
-	&clk_perclk3,
-	&clk_system_clk,
-	&clk_hclk,
-	&clk_mcu_clk,
-	&clk_uart_clk,
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (!strcmp(p->name, id)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->get_rate();
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int imx_clocks_init(void)
-{
-	int i;
-
-	mutex_lock(&clocks_mutex);
-	for (i = 0; i < ARRAY_SIZE(clks); i++)
-		list_add(&clks[i]->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
deleted file mode 100644
index 434b4ca0af6..00000000000
--- a/arch/arm/mach-imx/cpufreq.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * cpu.c: clock scaling for the iMX
- *
- * Copyright (C) 2000 2001, The Delft University of Technology
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com>
- * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
- *
- * Based on SA1100 version written by:
- * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
- * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-/*#define DEBUG*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/system.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-#ifndef __val2mfld
-#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask))
-#endif
-#ifndef __mfld2val
-#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1)))
-#endif
-
-#define CR_920T_CLOCK_MODE	0xC0000000
-#define CR_920T_FASTBUS_MODE	0x00000000
-#define CR_920T_ASYNC_MODE	0xC0000000
-
-static u32 mpctl0_at_boot;
-static u32 bclk_div_at_boot;
-
-static struct clk *system_clk, *mcu_clk;
-
-static void imx_set_async_mode(void)
-{
-	adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
-}
-
-static void imx_set_fastbus_mode(void)
-{
-	adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE);
-}
-
-static void imx_set_mpctl0(u32 mpctl0)
-{
-	unsigned long flags;
-
-	if (mpctl0 == 0) {
-		local_irq_save(flags);
-		CSCR &= ~CSCR_MPEN;
-		local_irq_restore(flags);
-		return;
-	}
-
-	local_irq_save(flags);
-	MPCTL0 = mpctl0;
-	CSCR |= CSCR_MPEN;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_compute_mpctl - compute new PLL parameters
- * @new_mpctl:	pointer to location assigned by new PLL control register value
- * @cur_mpctl:	current PLL control register parameters
- * @f_ref:	reference source frequency Hz
- * @freq:	required frequency in Hz
- * @relation:	is one of %CPUFREQ_RELATION_L (supremum)
- *		and %CPUFREQ_RELATION_H (infimum)
- */
-long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation)
-{
-        u32 mfi;
-        u32 mfn;
-        u32 mfd;
-        u32 pd;
-	unsigned long long ll;
-	long l;
-	long quot;
-
-	/* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */
-	/*  PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */
-
-	if (cur_mpctl) {
-		mfd = ((cur_mpctl >> 16) & 0x3ff) + 1;
-		pd =  ((cur_mpctl >> 26) & 0xf) + 1;
-	} else {
-		pd=2; mfd=313;
-	}
-
-	/* pd=2; mfd=313; mfi=8; mfn=183; */
-	/* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */
-
-	quot = (f_ref + (1 << 9)) >> 10;
-	l = (freq * pd + quot) / (2 * quot);
-	mfi = l >> 10;
-	mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10;
-
-	mfd -= 1;
-	pd -= 1;
-
-	*new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16)
-		| ((pd & 0xf) << 26);
-
-	ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
-	quot = (pd+1) * (1<<16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	freq = ll;
-
-	pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n",
-		pd, mfd, mfi, mfn, freq);
-
-	return freq;
-}
-
-
-static int imx_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
-static unsigned int imx_get_speed(unsigned int cpu)
-{
-	unsigned int freq;
-	unsigned int cr;
-	unsigned int cscr;
-	unsigned int bclk_div;
-
-	if (cpu)
-		return 0;
-
-	cscr = CSCR;
-	bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1;
-	cr = get_cr();
-
-	if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
-		freq = clk_get_rate(system_clk);
-		freq = (freq + bclk_div/2) / bclk_div;
-	} else {
-		freq = clk_get_rate(mcu_clk);
-		if (cscr & CSCR_MPU_PRESC)
-			freq /= 2;
-	}
-
-	freq = (freq + 500) / 1000;
-
-	return freq;
-}
-
-static int imx_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	u32 mpctl0 = 0;
-	u32 cscr;
-	unsigned long flags;
-	long freq;
-	long sysclk;
-	unsigned int bclk_div = bclk_div_at_boot;
-
-	/*
-	 * Some governors do not respects CPU and policy lower limits
-	 * which leads to bad things (division by zero etc), ensure
-	 * that such things do not happen.
-	 */
-	if(target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-
-	if(target_freq < policy->min)
-		target_freq = policy->min;
-
-	freq = target_freq * 1000;
-
-	pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
-			freq, mpctl0_at_boot);
-
-	sysclk = clk_get_rate(system_clk);
-
-	if (freq > sysclk / bclk_div_at_boot + 1000000) {
-		freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
-		if (freq < 0) {
-			printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq);
-			return -EINVAL;
-		}
-	} else {
-		if(freq + 1000 < sysclk) {
-			if (relation == CPUFREQ_RELATION_L)
-				bclk_div = (sysclk - 1000) / freq;
-			else
-				bclk_div = (sysclk + freq + 1000) / freq;
-
-			if(bclk_div > 16)
-				bclk_div = 16;
-			if(bclk_div < bclk_div_at_boot)
-				bclk_div = bclk_div_at_boot;
-		}
-		freq = (sysclk + bclk_div / 2) / bclk_div;
-	}
-
-	freqs.old = imx_get_speed(0);
-	freqs.new = (freq + 500) / 1000;
-	freqs.cpu = 0;
-	freqs.flags = 0;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	local_irq_save(flags);
-
-	imx_set_fastbus_mode();
-
-	imx_set_mpctl0(mpctl0);
-
-	cscr = CSCR;
-	cscr &= ~CSCR_BCLK_DIV;
-	cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1);
-	CSCR = cscr;
-
-	if(mpctl0) {
-		CSCR |= CSCR_MPLL_RESTART;
-
-		/* Wait until MPLL is stabilized */
-		while( CSCR & CSCR_MPLL_RESTART );
-
-		imx_set_async_mode();
-	}
-
-	local_irq_restore(flags);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n",
-			freq, mpctl0? "MPLL": "SPLL");
-
-	return 0;
-}
-
-static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
-	printk(KERN_INFO "i.MX cpu freq change driver v1.0\n");
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	policy->cur = policy->min = policy->max = imx_get_speed(0);
-	policy->cpuinfo.min_freq = 8000;
-	policy->cpuinfo.max_freq = 200000;
-	 /* Manual states, that PLL stabilizes in two CLK32 periods */
-	policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
-	return 0;
-}
-
-static struct cpufreq_driver imx_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= imx_verify_speed,
-	.target		= imx_set_target,
-	.get		= imx_get_speed,
-	.init		= imx_cpufreq_driver_init,
-	.name		= "imx",
-};
-
-static int __init imx_cpufreq_init(void)
-{
-	bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
-	mpctl0_at_boot = 0;
-
-	system_clk = clk_get(NULL, "system_clk");
-	if (IS_ERR(system_clk))
-		return PTR_ERR(system_clk);
-
-	mcu_clk = clk_get(NULL, "mcu_clk");
-	if (IS_ERR(mcu_clk)) {
-		clk_put(system_clk);
-		return PTR_ERR(mcu_clk);
-	}
-
-	if((CSCR & CSCR_MPEN) &&
-	   ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
-		mpctl0_at_boot = MPCTL0;
-
-	return cpufreq_register_driver(&imx_driver);
-}
-
-arch_initcall(imx_cpufreq_init);
-
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
deleted file mode 100644
index 1536583eece..00000000000
--- a/arch/arm/mach-imx/dma.c
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/dma.c
- *
- *  imx DMA registration and IRQ dispatching
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  2004-03-03 Sascha Hauer <sascha@saschahauer.de>
- *             initial version heavily inspired by
- *             linux/arch/arm/mach-pxa/dma.c
- *
- *  2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Changed to support scatter gather DMA
- *             by taking Russell's code from RiscPC
- *
- *  2006-05-31 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Corrected error handling code.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-
-#include <asm/scatterlist.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/imx-dma.h>
-
-struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-/*
- * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @lastcount: number of bytes transferred during last transfer
- *
- * Functions prepares DMA controller for next sg data chunk transfer.
- * The @lastcount argument informs function about number of bytes transferred
- * during last block. Zero value can be used for @lastcount to setup DMA
- * for the first chunk.
- */
-static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned int nextcount;
-	unsigned int nextaddr;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return 0;
-	}
-
-	imxdma->resbytes -= lastcount;
-
-	if (!imxdma->sg) {
-		pr_debug("imxdma%d: no sg data\n", dma_ch);
-		return 0;
-	}
-
-	imxdma->sgbc += lastcount;
-	if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) {
-		if ((imxdma->sgcount <= 1) || !imxdma->resbytes) {
-			pr_debug("imxdma%d: sg transfer limit reached\n",
-				 dma_ch);
-			imxdma->sgcount=0;
-			imxdma->sg = NULL;
-			return 0;
-		} else {
-			imxdma->sgcount--;
-			imxdma->sg++;
-			imxdma->sgbc = 0;
-		}
-	}
-	nextcount = imxdma->sg->length - imxdma->sgbc;
-	nextaddr = imxdma->sg->dma_address + imxdma->sgbc;
-
-	if(imxdma->resbytes < nextcount)
-		nextcount = imxdma->resbytes;
-
-	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
-		DAR(dma_ch) = nextaddr;
-	else
-		SAR(dma_ch) = nextaddr;
-
-	CNTR(dma_ch) = nextcount;
-	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n",
-		 dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch));
-
-	return nextcount;
-}
-
-/*
- * imx_dma_setup_sg_base - scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- *
- * Functions sets up i.MX DMA state for emulated scatter-gather transfer
- * and sets up channel registers to be ready for the first chunk
- */
-static int
-imx_dma_setup_sg_base(imx_dmach_t dma_ch,
-		      struct scatterlist *sg, unsigned int sgcount)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = sg;
-	imxdma->sgcount = sgcount;
-	imxdma->sgbc = 0;
-	return imx_dma_sg_next(dma_ch, 0);
-}
-
-/**
- * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @dma_address: the DMA/physical memory address of the linear data block
- *		to transfer
- * @dma_length: length of the data block in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function setups DMA channel source and destination addresses for transfer
- * specified by provided parameters. The scatter-gather emulation is disabled,
- * because linear data block
- * form the physical address range is transferred.
- * Return value: if incorrect parameters are provided -%EINVAL.
- *		Zero indicates success.
- */
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-		     unsigned int dma_length, unsigned int dev_addr,
-		     unsigned int dmamode)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = NULL;
-	imxdma->sgcount = 0;
-	imxdma->dma_mode = dmamode;
-	imxdma->resbytes = dma_length;
-
-	if (!dma_address) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if (!dma_length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n",
-			dma_ch, (unsigned int)dma_address, dma_length,
-			dev_addr);
-		SAR(dma_ch) = dev_addr;
-		DAR(dma_ch) = (unsigned int)dma_address;
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n",
-			dma_ch, (unsigned int)dma_address, dma_length,
-			dev_addr);
-		SAR(dma_ch) = (unsigned int)dma_address;
-		DAR(dma_ch) = dev_addr;
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	CNTR(dma_ch) = dma_length;
-
-	return 0;
-}
-
-/**
- * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- * @dma_length: total length of the transfer request in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function sets up DMA channel state and registers to be ready for transfer
- * specified by provided parameters. The scatter-gather emulation is set up
- * according to the parameters.
- *
- * The full preparation of the transfer requires setup of more register
- * by the caller before imx_dma_enable() can be called.
- *
- * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes
- *
- * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx
- *
- * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical
- * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified
- *
- * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
- *
- * The typical setup for %DMA_MODE_WRITE is specified by next options combination
- *
- * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
- *
- * Be careful here and do not mistakenly mix source and target device
- * port sizes constants, they are really different:
- * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
- * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, unsigned int dmamode)
-{
-	int res;
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = NULL;
-	imxdma->sgcount = 0;
-	imxdma->dma_mode = dmamode;
-	imxdma->resbytes = dma_length;
-
-	if (!sg || !sgcount) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if (!sg->length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n",
-			dma_ch, sg, sgcount, dma_length, dev_addr);
-		SAR(dma_ch) = dev_addr;
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n",
-			dma_ch, sg, sgcount, dma_length, dev_addr);
-		DAR(dma_ch) = dev_addr;
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	res = imx_dma_setup_sg_base(dma_ch, sg, sgcount);
-	if (res <= 0) {
-		printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers
- * @dma_ch: i.MX DMA channel number
- * @irq_handler: the pointer to the function called if the transfer
- *		ends successfully
- * @err_handler: the pointer to the function called if the premature
- *		end caused by error occurs
- * @data: user specified value to be passed to the handlers
- */
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-		       void (*irq_handler) (int, void *),
-		       void (*err_handler) (int, void *, int),
-		       void *data)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return -ENODEV;
-	}
-
-	local_irq_save(flags);
-	DISR = (1 << dma_ch);
-	imxdma->irq_handler = irq_handler;
-	imxdma->err_handler = err_handler;
-	imxdma->data = data;
-	local_irq_restore(flags);
-	return 0;
-}
-
-/**
- * imx_dma_enable - function to start i.MX DMA channel operation
- * @dma_ch: i.MX DMA channel number
- *
- * The channel has to be allocated by driver through imx_dma_request()
- * or imx_dma_request_by_prio() function.
- * The transfer parameters has to be set to the channel registers through
- * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
- * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to
- * be set prior this function call by the channel user.
- */
-void imx_dma_enable(imx_dmach_t dma_ch)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_enable\n", dma_ch);
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	DISR = (1 << dma_ch);
-	DIMR &= ~(1 << dma_ch);
-	CCR(dma_ch) |= CCR_CEN;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_disable - stop, finish i.MX DMA channel operatin
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_disable(imx_dmach_t dma_ch)
-{
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_disable\n", dma_ch);
-
-	local_irq_save(flags);
-	DIMR |= (1 << dma_ch);
-	CCR(dma_ch) &= ~CCR_CEN;
-	DISR = (1 << dma_ch);
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request - request/allocate specified channel number
- * @dma_ch: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- */
-int imx_dma_request(imx_dmach_t dma_ch, const char *name)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	/* basic sanity checks */
-	if (!name)
-		return -EINVAL;
-
-	if (dma_ch >= IMX_DMA_CHANNELS) {
-		printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
-		       __func__, dma_ch);
-		return -EINVAL;
-	}
-
-	local_irq_save(flags);
-	if (imxdma->name) {
-		local_irq_restore(flags);
-		return -ENODEV;
-	}
-
-	imxdma->name = name;
-	imxdma->irq_handler = NULL;
-	imxdma->err_handler = NULL;
-	imxdma->data = NULL;
-	imxdma->sg = NULL;
-	local_irq_restore(flags);
-	return 0;
-}
-
-/**
- * imx_dma_free - release previously acquired channel
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_free(imx_dmach_t dma_ch)
-{
-	unsigned long flags;
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT
-		       "%s: trying to free channel %d which is already freed\n",
-		       __func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	/* Disable interrupts */
-	DIMR |= (1 << dma_ch);
-	CCR(dma_ch) &= ~CCR_CEN;
-	imxdma->name = NULL;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @name: the driver/caller own non-%NULL identification
- * @prio: one of the hardware distinguished priority level:
- *        %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
- *
- * This function tries to find free channel in the specified priority group
- * if the priority cannot be achieved it tries to look for free channel
- * in the higher and then even lower priority groups.
- *
- * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- *               On successful allocation channel is returned.
- */
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
-{
-	int i;
-	int best;
-
-	switch (prio) {
-	case (DMA_PRIO_HIGH):
-		best = 8;
-		break;
-	case (DMA_PRIO_MEDIUM):
-		best = 4;
-		break;
-	case (DMA_PRIO_LOW):
-	default:
-		best = 0;
-		break;
-	}
-
-	for (i = best; i < IMX_DMA_CHANNELS; i++) {
-		if (!imx_dma_request(i, name)) {
-			return i;
-		}
-	}
-
-	for (i = best - 1; i >= 0; i--) {
-		if (!imx_dma_request(i, name)) {
-			return i;
-		}
-	}
-
-	printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
-
-	return -ENODEV;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
-	int i, disr = DISR;
-	struct imx_dma_channel *channel;
-	unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR;
-	int errcode;
-
-	DISR = disr & err_mask;
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if(!(err_mask & (1 << i)))
-			continue;
-		channel = &imx_dma_channels[i];
-		errcode = 0;
-
-		if (DBTOSR & (1 << i)) {
-			DBTOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_BURST;
-		}
-		if (DRTOSR & (1 << i)) {
-			DRTOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_REQUEST;
-		}
-		if (DSESR & (1 << i)) {
-			DSESR = (1 << i);
-			errcode |= IMX_DMA_ERR_TRANSFER;
-		}
-		if (DBOSR & (1 << i)) {
-			DBOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_BUFFER;
-		}
-
-		/*
-		 * The cleaning of @sg field would be questionable
-		 * there, because its value can help to compute
-		 * remaining/transferred bytes count in the handler
-		 */
-		/*imx_dma_channels[i].sg = NULL;*/
-
-		if (channel->name && channel->err_handler) {
-			channel->err_handler(i, channel->data, errcode);
-			continue;
-		}
-
-		imx_dma_channels[i].sg = NULL;
-
-		printk(KERN_WARNING
-		       "DMA timeout on channel %d (%s) -%s%s%s%s\n",
-		       i, channel->name,
-		       errcode&IMX_DMA_ERR_BURST?    " burst":"",
-		       errcode&IMX_DMA_ERR_REQUEST?  " request":"",
-		       errcode&IMX_DMA_ERR_TRANSFER? " transfer":"",
-		       errcode&IMX_DMA_ERR_BUFFER?   " buffer":"");
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, disr = DISR;
-
-	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
-		     disr);
-
-	DISR = disr;
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if (disr & (1 << i)) {
-			struct imx_dma_channel *channel = &imx_dma_channels[i];
-			if (channel->name) {
-				if (imx_dma_sg_next(i, CNTR(i))) {
-					CCR(i) &= ~CCR_CEN;
-					mb();
-					CCR(i) |= CCR_CEN;
-				} else {
-					if (channel->irq_handler)
-						channel->irq_handler(i,
-							channel->data);
-				}
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk(KERN_WARNING
-				       "spurious IRQ for DMA channel %d\n", i);
-			}
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init imx_dma_init(void)
-{
-	int ret;
-	int i;
-
-	/* reset DMA module */
-	DCR = DCR_DRST;
-
-	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		return ret;
-	}
-
-	ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register ERRIRQ for DMA\n");
-		free_irq(DMA_INT, NULL);
-	}
-
-	/* enable DMA module */
-	DCR = DCR_DEN;
-
-	/* clear all interrupts */
-	DISR = (1 << IMX_DMA_CHANNELS) - 1;
-
-	/* enable interrupts */
-	DIMR = (1 << IMX_DMA_CHANNELS) - 1;
-
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		imx_dma_channels[i].sg = NULL;
-		imx_dma_channels[i].dma_num = i;
-	}
-
-	return ret;
-}
-
-arch_initcall(imx_dma_init);
-
-EXPORT_SYMBOL(imx_dma_setup_single);
-EXPORT_SYMBOL(imx_dma_setup_sg);
-EXPORT_SYMBOL(imx_dma_setup_handlers);
-EXPORT_SYMBOL(imx_dma_enable);
-EXPORT_SYMBOL(imx_dma_disable);
-EXPORT_SYMBOL(imx_dma_request);
-EXPORT_SYMBOL(imx_dma_free);
-EXPORT_SYMBOL(imx_dma_request_by_prio);
-EXPORT_SYMBOL(imx_dma_channels);
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
deleted file mode 100644
index 05f1739ee12..00000000000
--- a/arch/arm/mach-imx/generic.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *  arch/arm/mach-imx/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/errno.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#include <asm/mach/map.h>
-#include <mach/mmc.h>
-#include <mach/gpio.h>
-
-unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
-
-void imx_gpio_mode(int gpio_mode)
-{
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
-	unsigned int tmp;
-
-	/* Pullup enable */
-	if(gpio_mode & GPIO_PUEN)
-		PUEN(port) |= (1<<pin);
-	else
-		PUEN(port) &= ~(1<<pin);
-
-	/* Data direction */
-	if(gpio_mode & GPIO_OUT)
-		DDIR(port) |= 1<<pin;
-	else
-		DDIR(port) &= ~(1<<pin);
-
-	/* Primary / alternate function */
-	if(gpio_mode & GPIO_AF)
-		GPR(port) |= (1<<pin);
-	else
-		GPR(port) &= ~(1<<pin);
-
-	/* use as gpio? */
-	if(gpio_mode &  GPIO_GIUS)
-		GIUS(port) |= (1<<pin);
-	else
-		GIUS(port) &= ~(1<<pin);
-
-	/* Output / input configuration */
-	/* FIXME: I'm not very sure about OCR and ICONF, someone
-	 * should have a look over it
-	 */
-	if(pin<16) {
-		tmp = OCR1(port);
-		tmp &= ~( 3<<(pin*2));
-		tmp |= (ocr << (pin*2));
-		OCR1(port) = tmp;
-
-		ICONFA1(port) &= ~( 3<<(pin*2));
-		ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-		ICONFB1(port) &= ~( 3<<(pin*2));
-		ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-	} else {
-		tmp = OCR2(port);
-		tmp &= ~( 3<<((pin-16)*2));
-		tmp |= (ocr << ((pin-16)*2));
-		OCR2(port) = tmp;
-
-		ICONFA2(port) &= ~( 3<<((pin-16)*2));
-		ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
-		ICONFB2(port) &= ~( 3<<((pin-16)*2));
-		ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
-	}
-}
-
-EXPORT_SYMBOL(imx_gpio_mode);
-
-int imx_gpio_request(unsigned gpio, const char *label)
-{
-	if(gpio >= (GPIO_PORT_MAX + 1) * 32) {
-		printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n",
-			gpio, label ? label : "?");
-		return -EINVAL;
-	}
-
-	if(test_and_set_bit(gpio, imx_gpio_alloc_map)) {
-		printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n",
-			gpio, label ? label : "?");
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_request);
-
-void imx_gpio_free(unsigned gpio)
-{
-	if(gpio >= (GPIO_PORT_MAX + 1) * 32)
-		return;
-
-	clear_bit(gpio, imx_gpio_alloc_map);
-}
-
-EXPORT_SYMBOL(imx_gpio_free);
-
-int imx_gpio_direction_input(unsigned gpio)
-{
-	imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR);
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_input);
-
-int imx_gpio_direction_output(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-	imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR);
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_output);
-
-int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-				int alloc_mode, const char *label)
-{
-	const int *p = pin_list;
-	int i;
-	unsigned gpio;
-	unsigned mode;
-
-	for (i = 0; i < count; i++) {
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-		if (gpio >= (GPIO_PORT_MAX + 1) * 32)
-			goto setup_error;
-
-		if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE)
-			imx_gpio_free(gpio);
-		else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC))
-			if (imx_gpio_request(gpio, label))
-				if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
-					goto setup_error;
-
-		if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY |
-				    IMX_GPIO_ALLOC_MODE_RELEASE)))
-			imx_gpio_mode(gpio | mode);
-
-		p++;
-	}
-	return 0;
-
-setup_error:
-	if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC |
-		         IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
-		return -EINVAL;
-
-	while (p != pin_list) {
-		p--;
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		imx_gpio_free(gpio);
-	}
-
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(imx_gpio_setup_multiple_pins);
-
-void __imx_gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value_inline(gpio, value);
-}
-
-EXPORT_SYMBOL(__imx_gpio_set_value);
-
-int imx_gpio_to_irq(unsigned gpio)
-{
-	return IRQ_GPIOA(0) + gpio;
-}
-
-EXPORT_SYMBOL(imx_gpio_to_irq);
-
-int imx_irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIOA(0))
-		return -EINVAL;
-	return irq - IRQ_GPIOA(0);
-}
-
-EXPORT_SYMBOL(imx_irq_to_gpio);
-
-static struct resource imx_mmc_resources[] = {
-	[0] = {
-		.start	= 0x00214000,
-		.end	= 0x002140FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (SDHC_INT),
-		.end	= (SDHC_INT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 imxmmmc_dmamask = 0xffffffffUL;
-
-static struct platform_device imx_mmc_device = {
-	.name		= "imx-mmc",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &imxmmmc_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(imx_mmc_resources),
-	.resource	= imx_mmc_resources,
-};
-
-void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
-{
-	imx_mmc_device.dev.platform_data = info;
-}
-
-static struct platform_device *devices[] __initdata = {
-	&imx_mmc_device,
-};
-
-static struct map_desc imx_io_desc[] __initdata = {
-	{
-		.virtual	= IMX_IO_BASE,
-		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
-		.length		= IMX_IO_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init
-imx_map_io(void)
-{
-	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-static int __init imx_init(void)
-{
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(imx_init);
diff --git a/arch/arm/mach-imx/generic.h b/arch/arm/mach-imx/generic.h
deleted file mode 100644
index e91003e4bef..00000000000
--- a/arch/arm/mach-imx/generic.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/generic.h
- *
- * Author:	Sascha Hauer <sascha@saschahauer.de>
- * Copyright:	Synertronixx GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init imx_map_io(void);
-extern void __init imx_init_irq(void);
-
-struct sys_timer;
-extern struct sys_timer imx_timer;
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
deleted file mode 100644
index 87802bbfe63..00000000000
--- a/arch/arm/mach-imx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-imx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00000000	@ physical
-		movne	\rx, #0xe0000000	@ virtual
-		orreq	\rx, \rx, #0x00200000	@ physical
-		orr	\rx, \rx, #0x00006000	@ UART1 offset
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x40]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x98]	@ SR2
-		tst	\rd, #1 << 3		@ TXDC
-		beq	1002b			@ wait until transmit done
-		.endm
diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h
deleted file mode 100644
index 621ff2c730f..00000000000
--- a/arch/arm/mach-imx/include/mach/dma.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} imx_dma_prio;
-
-#define DMA_REQ_UART3_T        2
-#define DMA_REQ_UART3_R        3
-#define DMA_REQ_SSI2_T         4
-#define DMA_REQ_SSI2_R         5
-#define DMA_REQ_CSI_STAT       6
-#define DMA_REQ_CSI_R          7
-#define DMA_REQ_MSHC           8
-#define DMA_REQ_DSPA_DCT_DOUT  9
-#define DMA_REQ_DSPA_DCT_DIN  10
-#define DMA_REQ_DSPA_MAC      11
-#define DMA_REQ_EXT           12
-#define DMA_REQ_SDHC          13
-#define DMA_REQ_SPI1_R        14
-#define DMA_REQ_SPI1_T        15
-#define DMA_REQ_SSI_T         16
-#define DMA_REQ_SSI_R         17
-#define DMA_REQ_ASP_DAC       18
-#define DMA_REQ_ASP_ADC       19
-#define DMA_REQ_USP_EP(x)    (20+(x))
-#define DMA_REQ_SPI2_R        26
-#define DMA_REQ_SPI2_T        27
-#define DMA_REQ_UART2_T       28
-#define DMA_REQ_UART2_R       29
-#define DMA_REQ_UART1_T       30
-#define DMA_REQ_UART1_R       31
-
-#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
deleted file mode 100644
index e4db679f776..00000000000
--- a/arch/arm/mach-imx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#define AITC_NIVECSR   0x40
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(IMX_AITC_BASE)
-		@ Load offset & priority of the highest priority
-		@ interrupt pending.
-		ldr	\irqstat, [\base, #AITC_NIVECSR]
-		@ Shift off the priority leaving the offset or
-		@ "interrupt number", use arithmetic shift to
-		@ transform illegal source (0xffff) as -1
-		mov	\irqnr, \irqstat, asr #16
-		adds	\tmp, \irqnr, #1
-		.endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
deleted file mode 100644
index 6c2942f8292..00000000000
--- a/arch/arm/mach-imx/include/mach/gpio.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef _IMX_GPIO_H
-
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL	0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC	2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY	4
-#define IMX_GPIO_ALLOC_MODE_RELEASE	8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
-	return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	if(value)
-		DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
-	else
-		DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
-	raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
-	if(__builtin_constant_p(gpio))
-		imx_gpio_set_value_inline(gpio, value);
-	else
-		__imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-
-	imx_gpio_free(gpio);
-}
-
-static inline  int gpio_direction_input(unsigned gpio)
-{
-	return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return imx_irq_to_gpio(irq);
-}
-
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
deleted file mode 100644
index c73e9e724c7..00000000000
--- a/arch/arm/mach-imx/include/mach/hardware.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  arch/arm/mach-imx/include/mach/hardware.h
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS		0x00200000
-#define IMX_IO_SIZE		0x00100000
-#define IMX_IO_BASE		0xe0000000
-
-#define IMX_CS0_PHYS		0x10000000
-#define IMX_CS0_SIZE		0x02000000
-#define IMX_CS0_VIRT		0xe8000000
-
-#define IMX_CS1_PHYS		0x12000000
-#define IMX_CS1_SIZE		0x01000000
-#define IMX_CS1_VIRT		0xea000000
-
-#define IMX_CS2_PHYS		0x13000000
-#define IMX_CS2_SIZE		0x01000000
-#define IMX_CS2_VIRT		0xeb000000
-
-#define IMX_CS3_PHYS		0x14000000
-#define IMX_CS3_SIZE		0x01000000
-#define IMX_CS3_VIRT		0xec000000
-
-#define IMX_CS4_PHYS		0x15000000
-#define IMX_CS4_SIZE		0x01000000
-#define IMX_CS4_VIRT		0xed000000
-
-#define IMX_CS5_PHYS		0x16000000
-#define IMX_CS5_SIZE		0x01000000
-#define IMX_CS5_VIRT		0xee000000
-
-#define IMX_FB_VIRT		0xF1000000
-#define IMX_FB_SIZE		(256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM                       62
-#define MAXFIQNUM                       62
-#define MAXSWINUM                       62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE		0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
deleted file mode 100644
index bbe54df7f0d..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-dma.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <mach/dma.h>
-
-#ifndef __ASM_ARCH_IMX_DMA_H
-#define __ASM_ARCH_IMX_DMA_H
-
-#define IMX_DMA_CHANNELS  11
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @sgbc: counter of processed bytes in the actual read/written chunk
- * @resbytes: total residual number of bytes to transfer
- *            (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
-	const char *name;
-	void (*irq_handler) (int, void *);
-	void (*err_handler) (int, void *, int errcode);
-	void *data;
-	unsigned int  dma_mode;
-	struct scatterlist *sg;
-	unsigned int sgbc;
-	unsigned int sgcount;
-	unsigned int resbytes;
-	int dma_num;
-};
-
-extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-#define IMX_DMA_ERR_BURST     1
-#define IMX_DMA_ERR_REQUEST   2
-#define IMX_DMA_ERR_TRANSFER  4
-#define IMX_DMA_ERR_BUFFER    8
-
-/* The type to distinguish channel numbers parameter from ordinal int type */
-typedef int imx_dmach_t;
-
-#define DMA_MODE_READ		0
-#define DMA_MODE_WRITE		1
-#define DMA_MODE_MASK		1
-
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-		unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-		void (*irq_handler) (int, void *),
-		void (*err_handler) (int, void *, int), void *data);
-
-void imx_dma_enable(imx_dmach_t dma_ch);
-
-void imx_dma_disable(imx_dmach_t dma_ch);
-
-int imx_dma_request(imx_dmach_t dma_ch, const char *name);
-
-void imx_dma_free(imx_dmach_t dma_ch);
-
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
-
-
-#endif	/* _ASM_ARCH_IMX_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
deleted file mode 100644
index 490297fc0e3..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-regs.h
+++ /dev/null
@@ -1,376 +0,0 @@
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-/* ------------------------------------------------------------------------
- *  Motorola IMX system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- *  Register BASEs, based on OFFSETs
- *
- */
-#define IMX_AIPI1_BASE             (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE               (0x01000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE              (0x02000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE              (0x03000 + IMX_IO_BASE)
-#define IMX_RTC_BASE               (0x04000 + IMX_IO_BASE)
-#define IMX_LCDC_BASE              (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE             (0x06000 + IMX_IO_BASE)
-#define IMX_UART2_BASE             (0x07000 + IMX_IO_BASE)
-#define IMX_PWM_BASE               (0x08000 + IMX_IO_BASE)
-#define IMX_DMAC_BASE              (0x09000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE             (0x10000 + IMX_IO_BASE)
-#define IMX_SIM_BASE               (0x11000 + IMX_IO_BASE)
-#define IMX_USBD_BASE              (0x12000 + IMX_IO_BASE)
-#define IMX_SPI1_BASE              (0x13000 + IMX_IO_BASE)
-#define IMX_MMC_BASE               (0x14000 + IMX_IO_BASE)
-#define IMX_ASP_BASE               (0x15000 + IMX_IO_BASE)
-#define IMX_BTA_BASE               (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE               (0x17000 + IMX_IO_BASE)
-#define IMX_SSI_BASE               (0x18000 + IMX_IO_BASE)
-#define IMX_SPI2_BASE              (0x19000 + IMX_IO_BASE)
-#define IMX_MSHC_BASE              (0x1A000 + IMX_IO_BASE)
-#define IMX_PLL_BASE               (0x1B000 + IMX_IO_BASE)
-#define IMX_GPIO_BASE              (0x1C000 + IMX_IO_BASE)
-#define IMX_EIM_BASE               (0x20000 + IMX_IO_BASE)
-#define IMX_SDRAMC_BASE            (0x21000 + IMX_IO_BASE)
-#define IMX_MMA_BASE               (0x22000 + IMX_IO_BASE)
-#define IMX_AITC_BASE              (0x23000 + IMX_IO_BASE)
-#define IMX_CSI_BASE               (0x24000 + IMX_IO_BASE)
-
-/* PLL registers */
-#define CSCR   __REG(IMX_PLL_BASE)        /* Clock Source Control Register */
-#define CSCR_SPLL_RESTART	(1<<22)
-#define CSCR_MPLL_RESTART	(1<<21)
-#define CSCR_SYSTEM_SEL		(1<<16)
-#define CSCR_BCLK_DIV		(0xf<<10)
-#define CSCR_MPU_PRESC		(1<<15)
-#define CSCR_SPEN		(1<<1)
-#define CSCR_MPEN		(1<<0)
-
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x4)  /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x8)  /* MCU PLL and System Clock Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0xc)  /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define PCDR   __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-
-/*
- *  GPIO Module and I/O Multiplexer
- *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define DDIR(x)    __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
-#define OCR1(x)    __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
-#define OCR2(x)    __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
-#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
-#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
-#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
-#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
-#define DR(x)      __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
-#define GIUS(x)    __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
-#define SSR(x)     __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
-#define ICR1(x)    __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
-#define ICR2(x)    __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
-#define IMR(x)     __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
-#define ISR(x)     __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
-#define GPR(x)     __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
-#define SWR(x)     __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
-#define PUEN(x)    __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
-
-#define GPIO_PORT_MAX  3
-
-#define GPIO_PIN_MASK 0x1f
-#define GPIO_PORT_MASK (0x3 << 5)
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORTA (0<<5)
-#define GPIO_PORTB (1<<5)
-#define GPIO_PORTC (2<<5)
-#define GPIO_PORTD (3<<5)
-
-#define GPIO_OUT   (1<<7)
-#define GPIO_IN    (0<<7)
-#define GPIO_PUEN  (1<<8)
-
-#define GPIO_PF    (0<<9)
-#define GPIO_AF    (1<<9)
-
-#define GPIO_OCR_SHIFT 10
-#define GPIO_OCR_MASK (3<<10)
-#define GPIO_AIN   (0<<10)
-#define GPIO_BIN   (1<<10)
-#define GPIO_CIN   (2<<10)
-#define GPIO_DR    (3<<10)
-
-#define GPIO_AOUT_SHIFT 12
-#define GPIO_AOUT_MASK (3<<12)
-#define GPIO_AOUT     (0<<12)
-#define GPIO_AOUT_ISR (1<<12)
-#define GPIO_AOUT_0   (2<<12)
-#define GPIO_AOUT_1   (3<<12)
-
-#define GPIO_BOUT_SHIFT 14
-#define GPIO_BOUT_MASK (3<<14)
-#define GPIO_BOUT      (0<<14)
-#define GPIO_BOUT_ISR  (1<<14)
-#define GPIO_BOUT_0    (2<<14)
-#define GPIO_BOUT_1    (3<<14)
-
-#define GPIO_GIUS      (1<<16)
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#define PA0_AIN_SPI2_CLK     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
-#define PA0_AF_ETMTRACESYNC  ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
-#define PA1_PF_TIN           ( GPIO_PORTA | GPIO_PF | 1 )
-#define PA2_PF_PWM0          ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
-#define PA3_PF_CSI_MCLK      ( GPIO_PORTA | GPIO_PF | 3 )
-#define PA4_PF_CSI_D0        ( GPIO_PORTA | GPIO_PF | 4 )
-#define PA5_PF_CSI_D1        ( GPIO_PORTA | GPIO_PF | 5 )
-#define PA6_PF_CSI_D2        ( GPIO_PORTA | GPIO_PF | 6 )
-#define PA7_PF_CSI_D3        ( GPIO_PORTA | GPIO_PF | 7 )
-#define PA8_PF_CSI_D4        ( GPIO_PORTA | GPIO_PF | 8 )
-#define PA9_PF_CSI_D5        ( GPIO_PORTA | GPIO_PF | 9 )
-#define PA10_PF_CSI_D6       ( GPIO_PORTA | GPIO_PF | 10 )
-#define PA11_PF_CSI_D7       ( GPIO_PORTA | GPIO_PF | 11 )
-#define PA12_PF_CSI_VSYNC    ( GPIO_PORTA | GPIO_PF | 12 )
-#define PA13_PF_CSI_HSYNC    ( GPIO_PORTA | GPIO_PF | 13 )
-#define PA14_PF_CSI_PIXCLK   ( GPIO_PORTA | GPIO_PF | 14 )
-#define PA15_PF_I2C_SDA      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
-#define PA16_PF_I2C_SCL      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
-#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
-#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
-#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
-#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
-#define PA21_PF_A0           ( GPIO_PORTA | GPIO_PF | 21 )
-#define PA22_PF_CS4          ( GPIO_PORTA | GPIO_PF | 22 )
-#define PA23_PF_CS5          ( GPIO_PORTA | GPIO_PF | 23 )
-#define PA24_PF_A16          ( GPIO_PORTA | GPIO_PF | 24 )
-#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
-#define PA25_PF_A17          ( GPIO_PORTA | GPIO_PF | 25 )
-#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
-#define PA26_PF_A18          ( GPIO_PORTA | GPIO_PF | 26 )
-#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
-#define PA27_PF_A19          ( GPIO_PORTA | GPIO_PF | 27 )
-#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
-#define PA28_PF_A20          ( GPIO_PORTA | GPIO_PF | 28 )
-#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
-#define PA29_PF_A21          ( GPIO_PORTA | GPIO_PF | 29 )
-#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
-#define PA30_PF_A22          ( GPIO_PORTA | GPIO_PF | 30 )
-#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
-#define PA31_PF_A23          ( GPIO_PORTA | GPIO_PF | 31 )
-#define PA31_AF_ETMTRACECLK  ( GPIO_PORTA | GPIO_AF | 31 )
-#define PB8_PF_SD_DAT0       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
-#define PB8_AF_MS_PIO        ( GPIO_PORTB | GPIO_AF | 8 )
-#define PB9_PF_SD_DAT1       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9 )
-#define PB9_AF_MS_PI1        ( GPIO_PORTB | GPIO_AF | 9 )
-#define PB10_PF_SD_DAT2      ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10 )
-#define PB10_AF_MS_SCLKI     ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3      ( GPIO_PORTB | GPIO_PF | 11 )
-#define PB11_AF_MS_SDIO      ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK       ( GPIO_PORTB | GPIO_PF | 12 )
-#define PB12_AF_MS_SCLK0     ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
-#define PB13_AF_MS_BS        ( GPIO_PORTB | GPIO_AF | 13 )
-#define PB14_AF_SSI_RXFS     ( GPIO_PORTB | GPIO_AF | 14 )
-#define PB15_AF_SSI_RXCLK    ( GPIO_PORTB | GPIO_AF | 15 )
-#define PB16_AF_SSI_RXDAT    ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
-#define PB17_AF_SSI_TXDAT    ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
-#define PB18_AF_SSI_TXFS     ( GPIO_PORTB | GPIO_AF | 18 )
-#define PB19_AF_SSI_TXCLK    ( GPIO_PORTB | GPIO_AF | 19 )
-#define PB20_PF_USBD_AFE     ( GPIO_PORTB | GPIO_PF | 20 )
-#define PB21_PF_USBD_OE      ( GPIO_PORTB | GPIO_PF | 21 )
-#define PB22_PFUSBD_RCV      ( GPIO_PORTB | GPIO_PF | 22 )
-#define PB23_PF_USBD_SUSPND  ( GPIO_PORTB | GPIO_PF | 23 )
-#define PB24_PF_USBD_VP      ( GPIO_PORTB | GPIO_PF | 24 )
-#define PB25_PF_USBD_VM      ( GPIO_PORTB | GPIO_PF | 25 )
-#define PB26_PF_USBD_VPO     ( GPIO_PORTB | GPIO_PF | 26 )
-#define PB27_PF_USBD_VMO     ( GPIO_PORTB | GPIO_PF | 27 )
-#define PB28_PF_UART2_CTS    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
-#define PB29_PF_UART2_RTS    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
-#define PB30_PF_UART2_TXD    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
-#define PB31_PF_UART2_RXD    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
-#define PC3_PF_SSI_RXFS      ( GPIO_PORTC | GPIO_PF | 3 )
-#define PC4_PF_SSI_RXCLK     ( GPIO_PORTC | GPIO_PF | 4 )
-#define PC5_PF_SSI_RXDAT     ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
-#define PC6_PF_SSI_TXDAT     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
-#define PC7_PF_SSI_TXFS      ( GPIO_PORTC | GPIO_PF | 7 )
-#define PC8_PF_SSI_TXCLK     ( GPIO_PORTC | GPIO_PF | 8 )
-#define PC9_PF_UART1_CTS     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
-#define PC10_PF_UART1_RTS    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
-#define PC11_PF_UART1_TXD    ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
-#define PC12_PF_UART1_RXD    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
-#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
-#define PC14_PF_SPI1_SCLK    ( GPIO_PORTC | GPIO_PF | 14 )
-#define PC15_PF_SPI1_SS      ( GPIO_PORTC | GPIO_PF | 15 )
-#define PC16_PF_SPI1_MISO    ( GPIO_PORTC | GPIO_PF | 16 )
-#define PC17_PF_SPI1_MOSI    ( GPIO_PORTC | GPIO_PF | 17 )
-#define PC24_BIN_UART3_RI    ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
-#define PC25_BIN_UART3_DSR   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
-#define PC26_AOUT_UART3_DTR  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
-#define PC27_BIN_UART3_DCD   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
-#define PC28_BIN_UART3_CTS   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
-#define PC29_AOUT_UART3_RTS  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
-#define PC30_BIN_UART3_TX    ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
-#define PC31_AOUT_UART3_RX   ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
-#define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR     ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK    ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
-#define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
-#define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS      ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
-#define PD9_PF_PS            ( GPIO_PORTD | GPIO_PF | 9 )
-#define PD9_AF_UART2_RI      ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
-#define PD10_PF_SPL_SPR      ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
-#define PD10_AF_UART2_DSR    ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
-#define PD11_PF_CONTRAST     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
-#define PD12_PF_ACD_OE       ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
-#define PD13_PF_LP_HSYNC     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
-#define PD14_PF_FLM_VSYNC    ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
-#define PD15_PF_LD0          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
-#define PD16_PF_LD1          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
-#define PD17_PF_LD2          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
-#define PD18_PF_LD3          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
-#define PD19_PF_LD4          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
-#define PD20_PF_LD5          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
-#define PD21_PF_LD6          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
-#define PD22_PF_LD7          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
-#define PD23_PF_LD8          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
-#define PD24_PF_LD9          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
-#define PD25_PF_LD10         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
-#define PD26_PF_LD11         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
-#define PD27_PF_LD12         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
-#define PD28_PF_LD13         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
-#define PD29_PF_LD14         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
-#define PD30_PF_LD15         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
-#define PD31_PF_TMR2OUT      ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
-
-/*
- * PWM controller
- */
-#define PWMC	__REG(IMX_PWM_BASE + 0x00)	/* PWM Control Register		*/
-#define PWMS	__REG(IMX_PWM_BASE + 0x04)	/* PWM Sample Register		*/
-#define PWMP	__REG(IMX_PWM_BASE + 0x08)	/* PWM Period Register		*/
-#define PWMCNT	__REG(IMX_PWM_BASE + 0x0C)	/* PWM Counter Register		*/
-
-#define PWMC_HCTR		(0x01<<18)		/* Halfword FIFO Data Swapping	*/
-#define PWMC_BCTR		(0x01<<17)		/* Byte FIFO Data Swapping	*/
-#define PWMC_SWR		(0x01<<16)		/* Software Reset		*/
-#define PWMC_CLKSRC		(0x01<<15)		/* Clock Source			*/
-#define PWMC_PRESCALER(x)	(((x-1) & 0x7F) << 8)	/* PRESCALER			*/
-#define PWMC_IRQ		(0x01<< 7)		/* Interrupt Request		*/
-#define PWMC_IRQEN		(0x01<< 6)		/* Interrupt Request Enable	*/
-#define PWMC_FIFOAV		(0x01<< 5)		/* FIFO Available		*/
-#define PWMC_EN			(0x01<< 4)		/* Enables/Disables the PWM	*/
-#define PWMC_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
-#define PWMC_CLKSEL(x)		(((x) & 0x03) << 0)	/* Clock Selection		*/
-
-#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
-#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
-#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
-
-/*
- *  DMA Controller
- */
-#define DCR     __REG(IMX_DMAC_BASE +0x00)	/* DMA Control Register */
-#define DISR    __REG(IMX_DMAC_BASE +0x04)	/* DMA Interrupt status Register */
-#define DIMR    __REG(IMX_DMAC_BASE +0x08)	/* DMA Interrupt mask Register */
-#define DBTOSR  __REG(IMX_DMAC_BASE +0x0c)	/* DMA Burst timeout status Register */
-#define DRTOSR  __REG(IMX_DMAC_BASE +0x10)	/* DMA Request timeout Register */
-#define DSESR   __REG(IMX_DMAC_BASE +0x14)	/* DMA Transfer Error Status Register */
-#define DBOSR   __REG(IMX_DMAC_BASE +0x18)	/* DMA Buffer overflow status Register */
-#define DBTOCR  __REG(IMX_DMAC_BASE +0x1c)	/* DMA Burst timeout control Register */
-#define WSRA    __REG(IMX_DMAC_BASE +0x40)	/* W-Size Register A */
-#define XSRA    __REG(IMX_DMAC_BASE +0x44)	/* X-Size Register A */
-#define YSRA    __REG(IMX_DMAC_BASE +0x48)	/* Y-Size Register A */
-#define WSRB    __REG(IMX_DMAC_BASE +0x4c)	/* W-Size Register B */
-#define XSRB    __REG(IMX_DMAC_BASE +0x50)	/* X-Size Register B */
-#define YSRB    __REG(IMX_DMAC_BASE +0x54)	/* Y-Size Register B */
-#define SAR(x)  __REG2( IMX_DMAC_BASE + 0x80, (x) << 6)	/* Source Address Registers */
-#define DAR(x)  __REG2( IMX_DMAC_BASE + 0x84, (x) << 6)	/* Destination Address Registers */
-#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6)	/* Count Registers */
-#define CCR(x)  __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6)	/* Control Registers */
-#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6)	/* Request source select Registers */
-#define BLR(x)  __REG2( IMX_DMAC_BASE + 0x94, (x) << 6)	/* Burst length Registers */
-#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Request timeout Registers */
-#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Bus Utilization Registers */
-
-#define DCR_DRST           (1<<1)
-#define DCR_DEN            (1<<0)
-#define DBTOCR_EN          (1<<15)
-#define DBTOCR_CNT(x)      ((x) & 0x7fff )
-#define CNTR_CNT(x)        ((x) & 0xffffff )
-#define CCR_DMOD_LINEAR    ( 0x0 << 12 )
-#define CCR_DMOD_2D        ( 0x1 << 12 )
-#define CCR_DMOD_FIFO      ( 0x2 << 12 )
-#define CCR_DMOD_EOBFIFO   ( 0x3 << 12 )
-#define CCR_SMOD_LINEAR    ( 0x0 << 10 )
-#define CCR_SMOD_2D        ( 0x1 << 10 )
-#define CCR_SMOD_FIFO      ( 0x2 << 10 )
-#define CCR_SMOD_EOBFIFO   ( 0x3 << 10 )
-#define CCR_MDIR_DEC       (1<<9)
-#define CCR_MSEL_B         (1<<8)
-#define CCR_DSIZ_32        ( 0x0 << 6 )
-#define CCR_DSIZ_8         ( 0x1 << 6 )
-#define CCR_DSIZ_16        ( 0x2 << 6 )
-#define CCR_SSIZ_32        ( 0x0 << 4 )
-#define CCR_SSIZ_8         ( 0x1 << 4 )
-#define CCR_SSIZ_16        ( 0x2 << 4 )
-#define CCR_REN            (1<<3)
-#define CCR_RPT            (1<<2)
-#define CCR_FRC            (1<<1)
-#define CCR_CEN            (1<<0)
-#define RTOR_EN            (1<<15)
-#define RTOR_CLK           (1<<14)
-#define RTOR_PSC           (1<<13)
-
-/*
- *  Interrupt controller
- */
-
-#define IMX_INTCNTL        __REG(IMX_AITC_BASE+0x00)
-#define INTCNTL_FIAD       (1<<19)
-#define INTCNTL_NIAD       (1<<20)
-
-#define IMX_NIMASK         __REG(IMX_AITC_BASE+0x04)
-#define IMX_INTENNUM       __REG(IMX_AITC_BASE+0x08)
-#define IMX_INTDISNUM      __REG(IMX_AITC_BASE+0x0c)
-#define IMX_INTENABLEH     __REG(IMX_AITC_BASE+0x10)
-#define IMX_INTENABLEL     __REG(IMX_AITC_BASE+0x14)
-
-/*
- *  General purpose timers
- */
-#define IMX_TCTL(x)        __REG( 0x00 + (x))
-#define TCTL_SWR           (1<<15)
-#define TCTL_FRR           (1<<8)
-#define TCTL_CAP_RIS       (1<<6)
-#define TCTL_CAP_FAL       (2<<6)
-#define TCTL_CAP_RIS_FAL   (3<<6)
-#define TCTL_OM            (1<<5)
-#define TCTL_IRQEN         (1<<4)
-#define TCTL_CLK_PCLK1     (1<<1)
-#define TCTL_CLK_PCLK1_16  (2<<1)
-#define TCTL_CLK_TIN       (3<<1)
-#define TCTL_CLK_32        (4<<1)
-#define TCTL_TEN           (1<<0)
-
-#define IMX_TPRER(x)       __REG( 0x04 + (x))
-#define IMX_TCMP(x)        __REG( 0x08 + (x))
-#define IMX_TCR(x)         __REG( 0x0C + (x))
-#define IMX_TCN(x)         __REG( 0x10 + (x))
-#define IMX_TSTAT(x)       __REG( 0x14 + (x))
-#define TSTAT_CAPT         (1<<1)
-#define TSTAT_COMP         (1<<0)
-
-#endif				// _IMX_REGS_H
diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
deleted file mode 100644
index d54eb1d4802..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-uart.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-
-struct imxuart_platform_data {
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
-	unsigned int flags;
-};
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
deleted file mode 100644
index 67812c5ac1f..00000000000
--- a/arch/arm/mach-imx/include/mach/irqs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <mach/hardware.h>
-
-/*
- *  IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT                 0
-#define CSI_INT                     6
-#define DSPA_MAC_INT                7
-#define DSPA_INT                    8
-#define COMP_INT                    9
-#define MSHC_XINT                   10
-#define GPIO_INT_PORTA              11
-#define GPIO_INT_PORTB              12
-#define GPIO_INT_PORTC              13
-#define LCDC_INT                    14
-#define SIM_INT                     15
-#define SIM_DATA_INT                16
-#define RTC_INT                     17
-#define RTC_SAMINT                  18
-#define UART2_MINT_PFERR            19
-#define UART2_MINT_RTS              20
-#define UART2_MINT_DTR              21
-#define UART2_MINT_UARTC            22
-#define UART2_MINT_TX               23
-#define UART2_MINT_RX               24
-#define UART1_MINT_PFERR            25
-#define UART1_MINT_RTS              26
-#define UART1_MINT_DTR              27
-#define UART1_MINT_UARTC            28
-#define UART1_MINT_TX               29
-#define UART1_MINT_RX               30
-#define VOICE_DAC_INT               31
-#define VOICE_ADC_INT               32
-#define PEN_DATA_INT                33
-#define PWM_INT                     34
-#define SDHC_INT                    35
-#define I2C_INT                     39
-#define CSPI_INT                    41
-#define SSI_TX_INT                  42
-#define SSI_TX_ERR_INT              43
-#define SSI_RX_INT                  44
-#define SSI_RX_ERR_INT              45
-#define TOUCH_INT                   46
-#define USBD_INT0                   47
-#define USBD_INT1                   48
-#define USBD_INT2                   49
-#define USBD_INT3                   50
-#define USBD_INT4                   51
-#define USBD_INT5                   52
-#define USBD_INT6                   53
-#define BTSYS_INT                   55
-#define BTTIM_INT                   56
-#define BTWUI_INT                   57
-#define TIM2_INT                    58
-#define TIM1_INT                    59
-#define DMA_ERR                     60
-#define DMA_INT                     61
-#define GPIO_INT_PORTD              62
-
-#define IMX_IRQS                         (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- *       the following pins are connected to the outside
- *       world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- *   - mapping the interrupts without holes would get
- *     far more complicated
- *   - Motorola could well decide to bring some processor
- *     with more pins connected
- */
-
-#define IRQ_GPIOA(x)  (IMX_IRQS + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START	0
-/* switch betwean IRQ and FIQ */
-extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
deleted file mode 100644
index 4712f354dcc..00000000000
--- a/arch/arm/mach-imx/include/mach/mmc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-struct imxmmc_platform_data {
-	int (*card_present)(struct device *);
-	int (*get_ro)(struct device *);
-};
-
-extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
deleted file mode 100644
index def05d510eb..00000000000
--- a/arch/arm/mach-imx/include/mach/mx1ads.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS		0x10000000
-#define MX1ADS_FLASH_SIZE		(16*1024*1024)
-
-#define IMX_FB_PHYS			(0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
deleted file mode 100644
index 4186430feec..00000000000
--- a/arch/arm/mach-imx/include/mach/spi_imx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- *	Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- *	linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- *	SPI slaves, and are numbered from zero to num_chipselects - 1.
- *	each slave has a chipselect signal, but it's common that not
- *	every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
-	u8 num_chipselect;
-	u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- *	sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- *	dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- *	I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
-	u8	enable_loopback:1;
-	u8	enable_dma:1;
-	u8	ins_ss_pulse:1;
-	u16	bclk_wait:15;
-	void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT			(1 << 0)
-#define SPI_CS_DEASSERT			(1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
deleted file mode 100644
index 70523e67a8f..00000000000
--- a/arch/arm/mach-imx/include/mach/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/uncompress.h
- *
- *
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-	unsigned long serial_port;
-
-	do {
-		serial_port = UART1_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		serial_port = UART2_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		return;
-	} while(0);
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
deleted file mode 100644
index 531b95deadc..00000000000
--- a/arch/arm/mach-imx/irq.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/irq.c
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *  03/03/2004   Sascha Hauer <sascha@saschahauer.de>
- *               Copied from the motorola bsp package and added gpio demux
- *               interrupt handler
- */
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-/*
- *
- * We simply use the ENABLE DISABLE registers inside of the IMX
- * to turn on/off specific interrupts.
- *
- */
-
-#define INTCNTL_OFF               0x00
-#define NIMASK_OFF                0x04
-#define INTENNUM_OFF              0x08
-#define INTDISNUM_OFF             0x0C
-#define INTENABLEH_OFF            0x10
-#define INTENABLEL_OFF            0x14
-#define INTTYPEH_OFF              0x18
-#define INTTYPEL_OFF              0x1C
-#define NIPRIORITY_OFF(x)         (0x20+4*(7-(x)))
-#define NIVECSR_OFF               0x40
-#define FIVECSR_OFF               0x44
-#define INTSRCH_OFF               0x48
-#define INTSRCL_OFF               0x4C
-#define INTFRCH_OFF               0x50
-#define INTFRCL_OFF               0x54
-#define NIPNDH_OFF                0x58
-#define NIPNDL_OFF                0x5C
-#define FIPNDH_OFF                0x60
-#define FIPNDL_OFF                0x64
-
-#define VA_AITC_BASE              IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTCNTL         (VA_AITC_BASE + INTCNTL_OFF)
-#define IMX_AITC_NIMASK          (VA_AITC_BASE + NIMASK_OFF)
-#define IMX_AITC_INTENNUM        (VA_AITC_BASE + INTENNUM_OFF)
-#define IMX_AITC_INTDISNUM       (VA_AITC_BASE + INTDISNUM_OFF)
-#define IMX_AITC_INTENABLEH      (VA_AITC_BASE + INTENABLEH_OFF)
-#define IMX_AITC_INTENABLEL      (VA_AITC_BASE + INTENABLEL_OFF)
-#define IMX_AITC_INTTYPEH        (VA_AITC_BASE + INTTYPEH_OFF)
-#define IMX_AITC_INTTYPEL        (VA_AITC_BASE + INTTYPEL_OFF)
-#define IMX_AITC_NIPRIORITY(x)   (VA_AITC_BASE + NIPRIORITY_OFF(x))
-#define IMX_AITC_NIVECSR         (VA_AITC_BASE + NIVECSR_OFF)
-#define IMX_AITC_FIVECSR         (VA_AITC_BASE + FIVECSR_OFF)
-#define IMX_AITC_INTSRCH         (VA_AITC_BASE + INTSRCH_OFF)
-#define IMX_AITC_INTSRCL         (VA_AITC_BASE + INTSRCL_OFF)
-#define IMX_AITC_INTFRCH         (VA_AITC_BASE + INTFRCH_OFF)
-#define IMX_AITC_INTFRCL         (VA_AITC_BASE + INTFRCL_OFF)
-#define IMX_AITC_NIPNDH          (VA_AITC_BASE + NIPNDH_OFF)
-#define IMX_AITC_NIPNDL          (VA_AITC_BASE + NIPNDL_OFF)
-#define IMX_AITC_FIPNDH          (VA_AITC_BASE + FIPNDH_OFF)
-#define IMX_AITC_FIPNDL          (VA_AITC_BASE + FIPNDL_OFF)
-
-#if 0
-#define DEBUG_IRQ(fmt...)	printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...)	do { } while (0)
-#endif
-
-static void
-imx_mask_irq(unsigned int irq)
-{
-	__raw_writel(irq, IMX_AITC_INTDISNUM);
-}
-
-static void
-imx_unmask_irq(unsigned int irq)
-{
-	__raw_writel(irq, IMX_AITC_INTENNUM);
-}
-
-#ifdef CONFIG_FIQ
-int imx_set_irq_fiq(unsigned int irq, unsigned int type)
-{
-	unsigned int irqt;
-
-	if (irq >= IMX_IRQS)
-		return -EINVAL;
-
-	if (irq < IMX_IRQS / 2) {
-		irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
-	} else {
-		irq -= IMX_IRQS / 2;
-		irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(imx_set_irq_fiq);
-#endif /* CONFIG_FIQ */
-
-static int
-imx_gpio_irq_type(unsigned int _irq, unsigned int type)
-{
-	unsigned int irq_type = 0, irq, reg, bit;
-
-	irq = _irq - IRQ_GPIOA(0);
-	reg = irq >> 5;
-	bit = 1 << (irq % 32);
-
-	if (type == IRQ_TYPE_PROBE) {
-		/* Don't mess with enabled GPIOs using preconfigured edges or
-		   GPIOs set to alternate function during probe */
-		/* TODO: support probe */
-//              if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
-//                  GPIO_bit(gpio))
-//                      return 0;
-//              if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
-//                      return 0;
-//              type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	GIUS(reg) |= bit;
-	DDIR(reg) &= ~(bit);
-
-	DEBUG_IRQ("setting type of irq %d to ", _irq);
-
-	if (type & IRQ_TYPE_EDGE_RISING) {
-		DEBUG_IRQ("rising edges\n");
-		irq_type = 0x0;
-	}
-	if (type & IRQ_TYPE_EDGE_FALLING) {
-		DEBUG_IRQ("falling edges\n");
-		irq_type = 0x1;
-	}
-	if (type & IRQ_TYPE_LEVEL_LOW) {
-		DEBUG_IRQ("low level\n");
-		irq_type = 0x3;
-	}
-	if (type & IRQ_TYPE_LEVEL_HIGH) {
-		DEBUG_IRQ("high level\n");
-		irq_type = 0x2;
-	}
-
-	if (irq % 32 < 16) {
-		ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) |
-		    (irq_type << ((irq % 16) * 2));
-	} else {
-		ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) |
-		    (irq_type << ((irq % 16) * 2));
-	}
-
-	return 0;
-
-}
-
-static void
-imx_gpio_ack_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_mask_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
-}
-
-static void
-imx_gpio_unmask_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_handler(unsigned int mask, unsigned int irq,
-                 struct irq_desc *desc)
-{
-	while (mask) {
-		if (mask & 1) {
-			DEBUG_IRQ("handling irq %d\n", irq);
-			generic_handle_irq(irq);
-		}
-		irq++;
-		mask >>= 1;
-	}
-}
-
-static void
-imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(0);
-	irq = IRQ_GPIOA(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(1);
-	irq = IRQ_GPIOB(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(2);
-	irq = IRQ_GPIOC(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(3);
-	irq = IRQ_GPIOD(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static struct irq_chip imx_internal_chip = {
-	.name = "MPU",
-	.ack = imx_mask_irq,
-	.mask = imx_mask_irq,
-	.unmask = imx_unmask_irq,
-};
-
-static struct irq_chip imx_gpio_chip = {
-	.name = "GPIO",
-	.ack = imx_gpio_ack_irq,
-	.mask = imx_gpio_mask_irq,
-	.unmask = imx_gpio_unmask_irq,
-	.set_type = imx_gpio_irq_type,
-};
-
-void __init
-imx_init_irq(void)
-{
-	unsigned int irq;
-
-	DEBUG_IRQ("Initializing imx interrupts\n");
-
-	/* Disable all interrupts initially. */
-	/* Do not rely on the bootloader. */
-	__raw_writel(0, IMX_AITC_INTENABLEH);
-	__raw_writel(0, IMX_AITC_INTENABLEL);
-
-	/* Mask all GPIO interrupts as well */
-	IMR(0) = 0;
-	IMR(1) = 0;
-	IMR(2) = 0;
-	IMR(3) = 0;
-
-	for (irq = 0; irq < IMX_IRQS; irq++) {
-		set_irq_chip(irq, &imx_internal_chip);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) {
-		set_irq_chip(irq, &imx_gpio_chip);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
-
-	/* Release masking of interrupts according to priority */
-	__raw_writel(-1, IMX_AITC_NIMASK);
-
-#ifdef CONFIG_FIQ
-	/* Initialize FIQ */
-	init_FIQ();
-#endif
-}
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
deleted file mode 100644
index 1d48f2762cb..00000000000
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds-mx1ads.c
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/leds.h>
-#include "leds.h"
-
-/*
- * The MX1ADS Board has only one usable LED,
- * so select only the timer led or the
- * cpu usage led
- */
-void
-mx1ads_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (ledevt) {
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		DR(0) &= ~(1<<2);
-		break;
-
-	case led_idle_end:
-		DR(0) |= 1<<2;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		DR(0) ^= 1<<2;
-#endif
-	default:
-		break;
-	}
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-imx/leds.c b/arch/arm/mach-imx/leds.c
deleted file mode 100644
index cf30803e019..00000000000
--- a/arch/arm/mach-imx/leds.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds.c
- *
- * Copyright (C) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-leds_init(void)
-{
-	if (machine_is_mx1ads()) {
-		leds_event = mx1ads_leds_event;
-	}
-
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-imx/leds.h b/arch/arm/mach-imx/leds.h
deleted file mode 100644
index 49dc1c1da33..00000000000
--- a/arch/arm/mach-imx/leds.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-imx/leds.h
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * blinky lights for IMX-based systems
- *
- */
-extern void mx1ads_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
deleted file mode 100644
index 87fa1ff43b0..00000000000
--- a/arch/arm/mach-imx/mx1ads.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/system.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-#include <linux/interrupt.h>
-#include "generic.h"
-
-static struct resource cs89x0_resources[] = {
-	[0] = {
-		.start	= IMX_CS4_PHYS + 0x300,
-		.end	= IMX_CS4_PHYS + 0x300 + 16,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_GPIOC(17),
-		.end	= IRQ_GPIOC(17),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cs89x0_device = {
-	.name		= "cirrus-cs89x0",
-	.num_resources	= ARRAY_SIZE(cs89x0_resources),
-	.resource	= cs89x0_resources,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource imx_uart1_resources[] = {
-	[0] = {
-		.start	= 0x00206000,
-		.end	= 0x002060FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART1_MINT_RX),
-		.end	= (UART1_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART1_MINT_TX),
-		.end	= (UART1_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= UART1_MINT_RTS,
-		.end	= UART1_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart1_device = {
-	.name		= "imx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
-	.resource	= imx_uart1_resources,
-	.dev = {
-		.platform_data = &uart_pdata,
-	}
-};
-
-static struct resource imx_uart2_resources[] = {
-	[0] = {
-		.start	= 0x00207000,
-		.end	= 0x002070FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART2_MINT_RX),
-		.end	= (UART2_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART2_MINT_TX),
-		.end	= (UART2_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= UART2_MINT_RTS,
-		.end	= UART2_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart2_device = {
-	.name		= "imx-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
-	.resource	= imx_uart2_resources,
-	.dev = {
-		.platform_data = &uart_pdata,
-	}
-};
-
-static struct platform_device *devices[] __initdata = {
-	&cs89x0_device,
-	&imx_uart1_device,
-	&imx_uart2_device,
-};
-
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-static int mx1ads_mmc_card_present(struct device *dev)
-{
-	/* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
-	return (SSR(1) & (1 << 20) ? 0 : 1);
-}
-
-static struct imxmmc_platform_data mx1ads_mmc_info = {
-       .card_present = mx1ads_mmc_card_present,
-};
-#endif
-
-static void __init
-mx1ads_init(void)
-{
-#ifdef CONFIG_LEDS
-	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
-#endif
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-	/* SD/MMC card detect */
-	imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
-	imx_set_mmc_info(&mx1ads_mmc_info);
-#endif
-
-	imx_gpio_mode(PC9_PF_UART1_CTS);
-	imx_gpio_mode(PC10_PF_UART1_RTS);
-	imx_gpio_mode(PC11_PF_UART1_TXD);
-	imx_gpio_mode(PC12_PF_UART1_RXD);
-
-	imx_gpio_mode(PB28_PF_UART2_CTS);
-	imx_gpio_mode(PB29_PF_UART2_RTS);
-	imx_gpio_mode(PB30_PF_UART2_TXD);
-	imx_gpio_mode(PB31_PF_UART2_RXD);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init
-mx1ads_map_io(void)
-{
-	imx_map_io();
-}
-
-MACHINE_START(MX1ADS, "Motorola MX1ADS")
-	/* Maintainer: Sascha Hauer, Pengutronix */
-	.phys_io	= 0x00200000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
-	.boot_params	= 0x08000100,
-	.map_io		= mx1ads_map_io,
-	.init_irq	= imx_init_irq,
-	.timer		= &imx_timer,
-	.init_machine	= mx1ads_init,
-MACHINE_END
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
deleted file mode 100644
index 5aef18b599e..00000000000
--- a/arch/arm/mach-imx/time.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/time.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-
-/* Use timer 1 as system timer */
-#define TIMER_BASE IMX_TIM1_BASE
-
-static struct clock_event_device clockevent_imx;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-imx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_imx;
-	uint32_t tstat;
-	irqreturn_t ret = IRQ_NONE;
-
-	/* clear the interrupt */
-	tstat = IMX_TSTAT(TIMER_BASE);
-	IMX_TSTAT(TIMER_BASE) = 0;
-
-	if (tstat & TSTAT_COMP) {
-		evt->event_handler(evt);
-		ret = IRQ_HANDLED;
-	}
-
-	return ret;
-}
-
-static struct irqaction imx_timer_irq = {
-	.name		= "i.MX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= imx_timer_interrupt,
-};
-
-/*
- * Set up timer hardware into expected mode and state.
- */
-static void __init imx_timer_hardware_init(void)
-{
-	/*
-	 * Initialise to a known state (all timers off, and timing reset)
-	 */
-	IMX_TCTL(TIMER_BASE) = 0;
-	IMX_TPRER(TIMER_BASE) = 0;
-
-	IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
-}
-
-cycle_t imx_get_cycles(struct clocksource *cs)
-{
-	return IMX_TCN(TIMER_BASE);
-}
-
-static struct clocksource clocksource_imx = {
-	.name 		= "imx_timer1",
-	.rating		= 200,
-	.read		= imx_get_cycles,
-	.mask		= 0xFFFFFFFF,
-	.shift 		= 20,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init imx_clocksource_init(unsigned long rate)
-{
-	clocksource_imx.mult =
-		clocksource_hz2mult(rate, clocksource_imx.shift);
-	clocksource_register(&clocksource_imx);
-
-	return 0;
-}
-
-static int imx_set_next_event(unsigned long evt,
-				  struct clock_event_device *unused)
-{
-	unsigned long tcmp;
-
-	tcmp = IMX_TCN(TIMER_BASE) + evt;
-	IMX_TCMP(TIMER_BASE) = tcmp;
-
-	return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[]={
-	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
-	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
-	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
-	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /*DEBUG*/
-
-static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
-	unsigned long flags;
-
-	/*
-	 * The timer interrupt generation is disabled at least
-	 * for enough time to call imx_set_next_event()
-	 */
-	local_irq_save(flags);
-	/* Disable interrupt in GPT module */
-	IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN;
-	if (mode != clockevent_mode) {
-		/* Set event time into far-far future */
-		IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3;
-		/* Clear pending interrupt */
-		IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP;
-	}
-
-#ifdef DEBUG
-	printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n",
-		clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]);
-#endif /*DEBUG*/
-
-	/* Remember timer mode */
-	clockevent_mode = mode;
-	local_irq_restore(flags);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n");
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/*
-		 * Do not put overhead of interrupt enable/disable into
-		 * imx_set_next_event(), the core has about 4 minutes
-		 * to call imx_set_next_event() or shutdown clock after
-		 * mode switching
-		 */
-		local_irq_save(flags);
-		IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN;
-		local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appears */
-		break;
-	}
-}
-
-static struct clock_event_device clockevent_imx = {
-	.name		= "imx_timer1",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_mode	= imx_set_mode,
-	.set_next_event	= imx_set_next_event,
-	.rating		= 200,
-};
-
-static int __init imx_clockevent_init(unsigned long rate)
-{
-	clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
-					clockevent_imx.shift);
-	clockevent_imx.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_imx);
-	clockevent_imx.min_delta_ns =
-		clockevent_delta2ns(0xf, &clockevent_imx);
-
-	clockevent_imx.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clockevent_imx);
-
-	return 0;
-}
-
-extern int imx_clocks_init(void);
-
-static void __init imx_timer_init(void)
-{
-	struct clk *clk;
-	unsigned long rate;
-
-	imx_clocks_init();
-
-	clk = clk_get(NULL, "perclk1");
-	clk_enable(clk);
-	rate = clk_get_rate(clk);
-
-	imx_timer_hardware_init();
-	imx_clocksource_init(rate);
-
-	imx_clockevent_init(rate);
-
-	/*
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(TIM1_INT, &imx_timer_irq);
-}
-
-struct sys_timer imx_timer = {
-	.init		= imx_timer_init,
-};
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 2c5a02b8520..264f4d59f89 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -78,6 +78,12 @@ config MACH_IXDP465
 	  IXDP465 Development Platform (Also known as BMP).
 	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 
+config MACH_GORAMO_MLR
+	bool "GORAMO Multi Link Router"
+	help
+	  Say 'Y' here if you want your kernel to support GORAMO
+	  MultiLink router.
+
 config MACH_KIXRP435
 	bool "KIXRP435"
 	help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 2e6bbf927a7..47d1f60d23f 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
 obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
 obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
 
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
new file mode 100644
index 00000000000..a733b8ff3ce
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -0,0 +1,507 @@
+/*
+ * Goramo MultiLink router platform code
+ * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
+ */
+
+#include <linux/delay.h>
+#include <linux/hdlc.h>
+#include <linux/i2c-gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <asm/mach-types.h>
+#include <asm/system.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/pci.h>
+
+#define xgpio_irq(n)		(IRQ_IXP4XX_GPIO ## n)
+#define gpio_irq(n)		xgpio_irq(n)
+
+#define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
+#define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
+#define SLOT_MPCI		0x0D	/* IDSEL = AD19 */
+#define SLOT_NEC		0x0E	/* IDSEL = AD18 */
+
+#define IRQ_ETHA		IRQ_IXP4XX_GPIO4
+#define IRQ_ETHB		IRQ_IXP4XX_GPIO5
+#define IRQ_NEC			IRQ_IXP4XX_GPIO3
+#define IRQ_MPCI		IRQ_IXP4XX_GPIO12
+
+/* GPIO lines */
+#define GPIO_SCL		0
+#define GPIO_SDA		1
+#define GPIO_STR		2
+#define GPIO_HSS0_DCD_N		6
+#define GPIO_HSS1_DCD_N		7
+#define GPIO_HSS0_CTS_N		10
+#define GPIO_HSS1_CTS_N		11
+#define GPIO_HSS1_RTS_N		13
+#define GPIO_HSS0_RTS_N		14
+
+/* Control outputs from 74HC4094 */
+#define CONTROL_HSS0_CLK_INT	0
+#define CONTROL_HSS1_CLK_INT	1
+#define CONTROL_HSS0_DTR_N	2
+#define CONTROL_HSS1_DTR_N	3
+#define CONTROL_EXT		4
+#define CONTROL_AUTO_RESET	5
+#define CONTROL_PCI_RESET_N	6
+#define CONTROL_EEPROM_WC_N	7
+
+/* offsets from start of flash ROM = 0x50000000 */
+#define CFG_ETH0_ADDRESS	0x40 /* 6 bytes */
+#define CFG_ETH1_ADDRESS	0x46 /* 6 bytes */
+#define CFG_REV			0x4C /* u32 */
+#define CFG_SDRAM_SIZE		0x50 /* u32 */
+#define CFG_SDRAM_CONF		0x54 /* u32 */
+#define CFG_SDRAM_MODE		0x58 /* u32 */
+#define CFG_SDRAM_REFRESH	0x5C /* u32 */
+
+#define CFG_HW_BITS		0x60 /* u32 */
+#define  CFG_HW_USB_PORTS	0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
+#define  CFG_HW_HAS_PCI_SLOT	0x00000008
+#define  CFG_HW_HAS_ETH0	0x00000010
+#define  CFG_HW_HAS_ETH1	0x00000020
+#define  CFG_HW_HAS_HSS0	0x00000040
+#define  CFG_HW_HAS_HSS1	0x00000080
+#define  CFG_HW_HAS_UART0	0x00000100
+#define  CFG_HW_HAS_UART1	0x00000200
+#define  CFG_HW_HAS_EEPROM	0x00000400
+
+#define FLASH_CMD_READ_ARRAY	0xFF
+#define FLASH_CMD_READ_ID	0x90
+#define FLASH_SER_OFF		0x102 /* 0x81 in 16-bit mode */
+
+static u32 hw_bits = 0xFFFFFFFD;    /* assume all hardware present */;
+static u8 control_value;
+
+static void set_scl(u8 value)
+{
+	gpio_line_set(GPIO_SCL, !!value);
+	udelay(3);
+}
+
+static void set_sda(u8 value)
+{
+	gpio_line_set(GPIO_SDA, !!value);
+	udelay(3);
+}
+
+static void set_str(u8 value)
+{
+	gpio_line_set(GPIO_STR, !!value);
+	udelay(3);
+}
+
+static inline void set_control(int line, int value)
+{
+	if (value)
+		control_value |=  (1 << line);
+	else
+		control_value &= ~(1 << line);
+}
+
+
+static void output_control(void)
+{
+	int i;
+
+	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+
+	for (i = 0; i < 8; i++) {
+		set_scl(0);
+		set_sda(control_value & (0x80 >> i)); /* MSB first */
+		set_scl(1);	/* active edge */
+	}
+
+	set_str(1);
+	set_str(0);
+
+	set_scl(0);
+	set_sda(1);		/* Be ready for START */
+	set_scl(1);
+}
+
+
+static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
+
+static int hss_set_clock(int port, unsigned int clock_type)
+{
+	int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
+
+	switch (clock_type) {
+	case CLOCK_DEFAULT:
+	case CLOCK_EXT:
+		set_control(ctrl_int, 0);
+		output_control();
+		return CLOCK_EXT;
+
+	case CLOCK_INT:
+		set_control(ctrl_int, 1);
+		output_control();
+		return CLOCK_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t hss_dcd_irq(int irq, void *pdev)
+{
+	int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N));
+	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	set_carrier_cb_tab[port](pdev, !i);
+	return IRQ_HANDLED;
+}
+
+
+static int hss_open(int port, void *pdev,
+		    void (*set_carrier_cb)(void *pdev, int carrier))
+{
+	int i, irq;
+
+	if (!port)
+		irq = gpio_irq(GPIO_HSS0_DCD_N);
+	else
+		irq = gpio_irq(GPIO_HSS1_DCD_N);
+
+	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	set_carrier_cb(pdev, !i);
+
+	set_carrier_cb_tab[!!port] = set_carrier_cb;
+
+	if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
+		printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
+		       irq, i);
+		return i;
+	}
+
+	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
+	output_control();
+	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
+	return 0;
+}
+
+static void hss_close(int port, void *pdev)
+{
+	free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N),
+		 pdev);
+	set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
+
+	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
+	output_control();
+	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
+}
+
+
+/* Flash memory */
+static struct flash_platform_data flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device device_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= { .platform_data = &flash_data },
+	.num_resources	= 1,
+	.resource	= &flash_resource,
+};
+
+
+/* I^2C interface */
+static struct i2c_gpio_platform_data i2c_data = {
+	.sda_pin	= GPIO_SDA,
+	.scl_pin	= GPIO_SCL,
+};
+
+static struct platform_device device_i2c = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= { .platform_data = &i2c_data },
+};
+
+
+/* IXP425 2 UART ports */
+static struct resource uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char __iomem *)IXP4XX_UART1_BASE_VIRT +
+			REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char __iomem *)IXP4XX_UART2_BASE_VIRT +
+			REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device device_uarts = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= uart_data,
+	.num_resources		= 2,
+	.resource		= uart_resources,
+};
+
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info eth_plat[] = {
+	{
+		.phy		= 0,
+		.rxq		= 3,
+		.txreadyq	= 32,
+	}, {
+		.phy		= 1,
+		.rxq		= 4,
+		.txreadyq	= 33,
+	}
+};
+
+static struct platform_device device_eth_tab[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= eth_plat,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= eth_plat + 1,
+	}
+};
+
+
+/* IXP425 2 synchronous serial ports */
+static struct hss_plat_info hss_plat[] = {
+	{
+		.set_clock	= hss_set_clock,
+		.open		= hss_open,
+		.close		= hss_close,
+		.txreadyq	= 34,
+	}, {
+		.set_clock	= hss_set_clock,
+		.open		= hss_open,
+		.close		= hss_close,
+		.txreadyq	= 35,
+	}
+};
+
+static struct platform_device device_hss_tab[] = {
+	{
+		.name			= "ixp4xx_hss",
+		.id			= 0,
+		.dev.platform_data	= hss_plat,
+	}, {
+		.name			= "ixp4xx_hss",
+		.id			= 1,
+		.dev.platform_data	= hss_plat + 1,
+	}
+};
+
+
+static struct platform_device *device_tab[6] __initdata = {
+	&device_flash,		/* index 0 */
+};
+
+static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+	return __raw_readb(flash + addr);
+#else
+	return __raw_readb(flash + (addr ^ 3));
+#endif
+}
+
+static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+	return __raw_readw(flash + addr);
+#else
+	return __raw_readw(flash + (addr ^ 2));
+#endif
+}
+
+static void __init gmlr_init(void)
+{
+	u8 __iomem *flash;
+	int i, devices = 1; /* flash */
+
+	ixp4xx_sys_init();
+
+	if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
+		printk(KERN_ERR "goramo-mlr: unable to access system"
+		       " configuration data\n");
+	else {
+		system_rev = __raw_readl(flash + CFG_REV);
+		hw_bits = __raw_readl(flash + CFG_HW_BITS);
+
+		for (i = 0; i < ETH_ALEN; i++) {
+			eth_plat[0].hwaddr[i] =
+				flash_readb(flash, CFG_ETH0_ADDRESS + i);
+			eth_plat[1].hwaddr[i] =
+				flash_readb(flash, CFG_ETH1_ADDRESS + i);
+		}
+
+		__raw_writew(FLASH_CMD_READ_ID, flash);
+		system_serial_high = flash_readw(flash, FLASH_SER_OFF);
+		system_serial_high <<= 16;
+		system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
+		system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
+		system_serial_low <<= 16;
+		system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
+		__raw_writew(FLASH_CMD_READ_ARRAY, flash);
+
+		iounmap(flash);
+	}
+
+	switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
+	case CFG_HW_HAS_UART0:
+		memset(&uart_data[1], 0, sizeof(uart_data[1]));
+		device_uarts.num_resources = 1;
+		break;
+
+	case CFG_HW_HAS_UART1:
+		device_uarts.dev.platform_data = &uart_data[1];
+		device_uarts.resource = &uart_resources[1];
+		device_uarts.num_resources = 1;
+		break;
+	}
+	if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
+		device_tab[devices++] = &device_uarts; /* max index 1 */
+
+	if (hw_bits & CFG_HW_HAS_ETH0)
+		device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
+	if (hw_bits & CFG_HW_HAS_ETH1)
+		device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
+
+	if (hw_bits & CFG_HW_HAS_HSS0)
+		device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
+	if (hw_bits & CFG_HW_HAS_HSS1)
+		device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
+
+	if (hw_bits & CFG_HW_HAS_EEPROM)
+		device_tab[devices++] = &device_i2c; /* max index 6 */
+
+	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
+	gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
+	set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
+	set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
+
+	set_control(CONTROL_HSS0_DTR_N, 1);
+	set_control(CONTROL_HSS1_DTR_N, 1);
+	set_control(CONTROL_EEPROM_WC_N, 1);
+	set_control(CONTROL_PCI_RESET_N, 1);
+	output_control();
+
+	msleep(1);	      /* Wait for PCI devices to initialize */
+
+	flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+	platform_add_devices(device_tab, devices);
+}
+
+
+#ifdef CONFIG_PCI
+static void __init gmlr_pci_preinit(void)
+{
+	set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW);
+	ixp4xx_pci_preinit();
+}
+
+static void __init gmlr_pci_postinit(void)
+{
+	if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
+	    (hw_bits & CFG_HW_USB_PORTS) < 5) {
+		/* need to adjust number of USB ports on NEC chip */
+		u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
+		if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
+			value &= ~7;
+			value |= (hw_bits & CFG_HW_USB_PORTS);
+			ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
+		}
+	}
+}
+
+static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	switch(slot) {
+	case SLOT_ETHA:	return IRQ_ETHA;
+	case SLOT_ETHB:	return IRQ_ETHB;
+	case SLOT_NEC:	return IRQ_NEC;
+	default:	return IRQ_MPCI;
+	}
+}
+
+static struct hw_pci gmlr_hw_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit	= gmlr_pci_preinit,
+	.postinit	= gmlr_pci_postinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= gmlr_map_irq,
+};
+
+static int __init gmlr_pci_init(void)
+{
+	if (machine_is_goramo_mlr() &&
+	    (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
+		pci_common_init(&gmlr_hw_pci);
+	return 0;
+}
+
+subsys_initcall(gmlr_pci_init);
+#endif /* CONFIG_PCI */
+
+
+MACHINE_START(GORAMO_MLR, "MultiLink")
+	/* Maintainer: Krzysztof Halasa */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= gmlr_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index def7773be67..b2ef65db0e9 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -26,6 +26,8 @@
 #define IXP46X_PROCESSOR_ID_VALUE	0x69054200 /* including IXP455 */
 #define IXP46X_PROCESSOR_ID_MASK	0xfffffff0
 
+#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
+				IXP42X_PROCESSOR_ID_VALUE)
 #define cpu_is_ixp42x()	((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
 			 IXP42X_PROCESSOR_ID_VALUE)
 #define cpu_is_ixp43x()	((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
@@ -35,8 +37,11 @@
 
 static inline u32 ixp4xx_read_feature_bits(void)
 {
-	unsigned int val = ~*IXP4XX_EXP_CFG2;
+	u32 val = ~*IXP4XX_EXP_CFG2;
 
+	if (cpu_is_ixp42x_rev_a0())
+		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
+					       IXP4XX_FEATURE_AES);
 	if (cpu_is_ixp42x())
 		return val & IXP42X_FEATURE_MASK;
 	if (cpu_is_ixp43x())
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
index 0cbe6ceb67c..9e7cad2d54c 100644
--- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
@@ -15,7 +15,7 @@
 #define DEBUG_QMGR	0
 
 #define HALF_QUEUES	32
-#define QUEUES		64	/* only 32 lower queues currently supported */
+#define QUEUES		64
 #define MAX_QUEUE_LENGTH 4	/* in dwords */
 
 #define QUEUE_STAT1_EMPTY		1 /* queue status bits */
@@ -110,48 +110,95 @@ static inline u32 qmgr_get_entry(unsigned int queue)
 	return val;
 }
 
-static inline int qmgr_get_stat1(unsigned int queue)
+static inline int __qmgr_get_stat1(unsigned int queue)
 {
 	extern struct qmgr_regs __iomem *qmgr_regs;
 	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
 		>> ((queue & 7) << 2)) & 0xF;
 }
 
-static inline int qmgr_get_stat2(unsigned int queue)
+static inline int __qmgr_get_stat2(unsigned int queue)
 {
 	extern struct qmgr_regs __iomem *qmgr_regs;
+	BUG_ON(queue >= HALF_QUEUES);
 	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
 		>> ((queue & 0xF) << 1)) & 0x3;
 }
 
+/**
+ * qmgr_stat_empty() - checks if a hardware queue is empty
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is empty.
+ */
 static inline int qmgr_stat_empty(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
+	BUG_ON(queue >= HALF_QUEUES);
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY;
 }
 
-static inline int qmgr_stat_nearly_empty(unsigned int queue)
+/**
+ * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is below low watermark.
+ */
+static inline int qmgr_stat_below_low_watermark(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	if (queue >= HALF_QUEUES)
+		return (__raw_readl(&qmgr_regs->statne_h) >>
+			(queue - HALF_QUEUES)) & 0x01;
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY;
 }
 
-static inline int qmgr_stat_nearly_full(unsigned int queue)
+/**
+ * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is above high watermark
+ */
+static inline int qmgr_stat_above_high_watermark(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
+	BUG_ON(queue >= HALF_QUEUES);
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL;
 }
 
+/**
+ * qmgr_stat_full() - checks if a hardware queue is full
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is full.
+ */
 static inline int qmgr_stat_full(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	if (queue >= HALF_QUEUES)
+		return (__raw_readl(&qmgr_regs->statf_h) >>
+			(queue - HALF_QUEUES)) & 0x01;
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL;
 }
 
+/**
+ * qmgr_stat_underflow() - checks if a hardware queue experienced underflow
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue experienced underflow.
+ */
 static inline int qmgr_stat_underflow(unsigned int queue)
 {
-	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
+	return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW;
 }
 
+/**
+ * qmgr_stat_overflow() - checks if a hardware queue experienced overflow
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue experienced overflow.
+ */
 static inline int qmgr_stat_overflow(unsigned int queue)
 {
-	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
+	return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW;
 }
 
 #endif
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 7bb8e778e4b..47ac69c7ec7 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -386,15 +386,6 @@ static int npe_reset(struct npe *npe)
 	/* reset the NPE */
 	ixp4xx_write_feature_bits(val &
 				  ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
-	for (i = 0; i < MAX_RETRIES; i++) {
-		if (!(ixp4xx_read_feature_bits() &
-		      (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
-			break;	/* reset completed */
-		udelay(1);
-	}
-	if (i == MAX_RETRIES)
-		return -ETIMEDOUT;
-
 	/* deassert reset */
 	ixp4xx_write_feature_bits(val |
 				  (IXP4XX_FEATURE_RESET_NPEA << npe->id));
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index bfddc73d0a2..bfdbe4b5a3c 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -18,8 +18,8 @@ struct qmgr_regs __iomem *qmgr_regs;
 static struct resource *mem_res;
 static spinlock_t qmgr_lock;
 static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-static void (*irq_handlers[HALF_QUEUES])(void *pdev);
-static void *irq_pdevs[HALF_QUEUES];
+static void (*irq_handlers[QUEUES])(void *pdev);
+static void *irq_pdevs[QUEUES];
 
 #if DEBUG_QMGR
 char qmgr_queue_descs[QUEUES][32];
@@ -28,51 +28,112 @@ char qmgr_queue_descs[QUEUES][32];
 void qmgr_set_irq(unsigned int queue, int src,
 		  void (*handler)(void *pdev), void *pdev)
 {
-	u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
-	int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
 	unsigned long flags;
 
-	src &= 7;
 	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
+	if (queue < HALF_QUEUES) {
+		u32 __iomem *reg;
+		int bit;
+		BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL);
+		reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */
+		bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
+		__raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit),
+			     reg);
+	} else
+		/* IRQ source for queues 32-63 is fixed */
+		BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY);
+
 	irq_handlers[queue] = handler;
 	irq_pdevs[queue] = pdev;
 	spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
 
-static irqreturn_t qmgr_irq1(int irq, void *pdev)
+static irqreturn_t qmgr_irq1_a0(int irq, void *pdev)
 {
-	int i;
-	u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
-	__raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
-
-	for (i = 0; i < HALF_QUEUES; i++)
-		if (val & (1 << i))
+	int i, ret = 0;
+	u32 en_bitmap, src, stat;
+
+	/* ACK - it may clear any bits so don't rely on it */
+	__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]);
+
+	en_bitmap = qmgr_regs->irqen[0];
+	while (en_bitmap) {
+		i = __fls(en_bitmap); /* number of the last "low" queue */
+		en_bitmap &= ~BIT(i);
+		src = qmgr_regs->irqsrc[i >> 3];
+		stat = qmgr_regs->stat1[i >> 3];
+		if (src & 4) /* the IRQ condition is inverted */
+			stat = ~stat;
+		if (stat & BIT(src & 3)) {
 			irq_handlers[i](irq_pdevs[i]);
+			ret = IRQ_HANDLED;
+		}
+	}
+	return ret;
+}
+
+
+static irqreturn_t qmgr_irq2_a0(int irq, void *pdev)
+{
+	int i, ret = 0;
+	u32 req_bitmap;
+
+	/* ACK - it may clear any bits so don't rely on it */
+	__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]);
+
+	req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h;
+	while (req_bitmap) {
+		i = __fls(req_bitmap); /* number of the last "high" queue */
+		req_bitmap &= ~BIT(i);
+		irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]);
+		ret = IRQ_HANDLED;
+	}
+	return ret;
+}
 
-	return val ? IRQ_HANDLED : 0;
+
+static irqreturn_t qmgr_irq(int irq, void *pdev)
+{
+	int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1);
+	u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]);
+
+	if (!req_bitmap)
+		return 0;
+	__raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */
+
+	while (req_bitmap) {
+		i = __fls(req_bitmap); /* number of the last queue */
+		req_bitmap &= ~BIT(i);
+		i += half * HALF_QUEUES;
+		irq_handlers[i](irq_pdevs[i]);
+	}
+	return IRQ_HANDLED;
 }
 
 
 void qmgr_enable_irq(unsigned int queue)
 {
 	unsigned long flags;
+	int half = queue / 32;
+	u32 mask = 1 << (queue & (HALF_QUEUES - 1));
 
 	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
-		     &qmgr_regs->irqen[0]);
+	__raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask,
+		     &qmgr_regs->irqen[half]);
 	spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
 void qmgr_disable_irq(unsigned int queue)
 {
 	unsigned long flags;
+	int half = queue / 32;
+	u32 mask = 1 << (queue & (HALF_QUEUES - 1));
 
 	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
-		     &qmgr_regs->irqen[0]);
-	__raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */
+	__raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask,
+		     &qmgr_regs->irqen[half]);
+	__raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */
 	spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
@@ -98,8 +159,7 @@ int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
 	u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
 	int err;
 
-	if (queue >= HALF_QUEUES)
-		return -ERANGE;
+	BUG_ON(queue >= QUEUES);
 
 	if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
 		return -EINVAL;
@@ -180,7 +240,7 @@ void qmgr_release_queue(unsigned int queue)
 {
 	u32 cfg, addr, mask[4];
 
-	BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
+	BUG_ON(queue >= QUEUES); /* not in valid range */
 
 	spin_lock_irq(&qmgr_lock);
 	cfg = __raw_readl(&qmgr_regs->sram[queue]);
@@ -224,6 +284,8 @@ void qmgr_release_queue(unsigned int queue)
 static int qmgr_init(void)
 {
 	int i, err;
+	irq_handler_t handler1, handler2;
+
 	mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
 				     IXP4XX_QMGR_REGION_SIZE,
 				     "IXP4xx Queue Manager");
@@ -247,23 +309,42 @@ static int qmgr_init(void)
 		__raw_writel(0, &qmgr_regs->irqen[i]);
 	}
 
+	__raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h);
+	__raw_writel(0, &qmgr_regs->statf_h);
+
 	for (i = 0; i < QUEUES; i++)
 		__raw_writel(0, &qmgr_regs->sram[i]);
 
-	err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
-			  "IXP4xx Queue Manager", NULL);
+	if (cpu_is_ixp42x_rev_a0()) {
+		handler1 = qmgr_irq1_a0;
+		handler2 = qmgr_irq2_a0;
+	} else
+		handler1 = handler2 = qmgr_irq;
+
+	err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager",
+			  NULL);
 	if (err) {
-		printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
-		       IRQ_IXP4XX_QM1);
+		printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+		       IRQ_IXP4XX_QM1, err);
 		goto error_irq;
 	}
 
+	err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager",
+			  NULL);
+	if (err) {
+		printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+		       IRQ_IXP4XX_QM2, err);
+		goto error_irq2;
+	}
+
 	used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
 	spin_lock_init(&qmgr_lock);
 
 	printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
 	return 0;
 
+error_irq2:
+	free_irq(IRQ_IXP4XX_QM1, NULL);
 error_irq:
 	iounmap(qmgr_regs);
 error_map:
@@ -274,7 +355,9 @@ error_map:
 static void qmgr_remove(void)
 {
 	free_irq(IRQ_IXP4XX_QM1, NULL);
+	free_irq(IRQ_IXP4XX_QM2, NULL);
 	synchronize_irq(IRQ_IXP4XX_QM1);
+	synchronize_irq(IRQ_IXP4XX_QM2);
 	iounmap(qmgr_regs);
 	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 }
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index b5421cccd7e..25100f7acf4 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -20,6 +20,12 @@ config MACH_RD88F6281
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-88F6281 Reference Board.
 
+config MACH_MV88F6281GTW_GE
+	bool "Marvell 88F6281 GTW GE Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell 88F6281 GTW GE Board.
+
 config MACH_SHEEVAPLUG
 	bool "Marvell SheevaPlug Reference Board"
 	help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 8f03c9b9bdd..9dd680e964d 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -3,5 +3,8 @@ obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
 obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+
+obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 5db4f0bbe5e..1da5d1c18ec 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -20,6 +20,7 @@
  */
 #define TARGET_DDR		0
 #define TARGET_DEV_BUS		1
+#define TARGET_SRAM		3
 #define TARGET_PCIE		4
 #define ATTR_DEV_SPI_ROM	0x1e
 #define ATTR_DEV_BOOT		0x1d
@@ -30,6 +31,7 @@
 #define ATTR_DEV_CS0		0x3e
 #define ATTR_PCIE_IO		0xe0
 #define ATTR_PCIE_MEM		0xe8
+#define ATTR_SRAM		0x01
 
 /*
  * Helpers to get DDR bank info
@@ -48,7 +50,6 @@
 
 
 struct mbus_dram_target_info kirkwood_mbus_dram_info;
-static int __initdata win_alloc_count;
 
 static int __init cpu_win_can_remap(int win)
 {
@@ -112,7 +113,11 @@ void __init kirkwood_setup_cpu_mbus(void)
 	setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
 		      TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
 
-	win_alloc_count = 3;
+	/*
+	 * Setup window for SRAM.
+	 */
+	setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
+		      TARGET_SRAM, ATTR_SRAM, -1);
 
 	/*
 	 * Setup MBUS dram target info.
@@ -140,8 +145,3 @@ void __init kirkwood_setup_cpu_mbus(void)
 	}
 	kirkwood_mbus_dram_info.num_cs = cs;
 }
-
-void __init kirkwood_setup_sram_win(u32 base, u32 size)
-{
-	setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1);
-}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index be1ca28fed3..0f691983801 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -16,6 +16,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
+#include <linux/mtd/nand.h>
 #include <linux/spi/orion_spi.h>
 #include <net/dsa.h>
 #include <asm/page.h>
@@ -29,6 +30,7 @@
 #include <plat/mvsdio.h>
 #include <plat/mv_xor.h>
 #include <plat/orion_nand.h>
+#include <plat/orion_wdt.h>
 #include <plat/time.h>
 #include "common.h"
 
@@ -54,6 +56,13 @@ void __init kirkwood_map_io(void)
 	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
 }
 
+/*
+ * Default clock control bits.  Any bit _not_ set in this variable
+ * will be cleared from the hardware after platform devices have been
+ * registered.  Some reserved bits must be set to 1.
+ */
+unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
+	
 
 /*****************************************************************************
  * EHCI
@@ -95,6 +104,7 @@ static struct platform_device kirkwood_ehci = {
 
 void __init kirkwood_ehci_init(void)
 {
+	kirkwood_clk_ctrl |= CGC_USB0;
 	platform_device_register(&kirkwood_ehci);
 }
 
@@ -151,6 +161,7 @@ static struct platform_device kirkwood_ge00 = {
 
 void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	kirkwood_clk_ctrl |= CGC_GE0;
 	eth_data->shared = &kirkwood_ge00_shared;
 	kirkwood_ge00.dev.platform_data = eth_data;
 
@@ -212,6 +223,7 @@ static struct platform_device kirkwood_ge01 = {
 
 void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	kirkwood_clk_ctrl |= CGC_GE1;
 	eth_data->shared = &kirkwood_ge01_shared;
 	kirkwood_ge01.dev.platform_data = eth_data;
 
@@ -258,6 +270,43 @@ void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
 
 
 /*****************************************************************************
+ * NAND flash
+ ****************************************************************************/
+static struct resource kirkwood_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
+	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
+				KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data kirkwood_nand_data = {
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+};
+
+static struct platform_device kirkwood_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &kirkwood_nand_data,
+	},
+	.resource	= &kirkwood_nand_resource,
+	.num_resources	= 1,
+};
+
+void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
+			       int chip_delay)
+{
+	kirkwood_clk_ctrl |= CGC_RUNIT;
+	kirkwood_nand_data.parts = parts;
+	kirkwood_nand_data.nr_parts = nr_parts;
+	kirkwood_nand_data.chip_delay = chip_delay;
+	platform_device_register(&kirkwood_nand_flash);
+}
+
+
+/*****************************************************************************
  * SoC RTC
  ****************************************************************************/
 static struct resource kirkwood_rtc_resource = {
@@ -301,6 +350,9 @@ static struct platform_device kirkwood_sata = {
 
 void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
 {
+	kirkwood_clk_ctrl |= CGC_SATA0;
+	if (sata_data->n_ports > 1)
+		kirkwood_clk_ctrl |= CGC_SATA1;
 	sata_data->dram = &kirkwood_mbus_dram_info;
 	kirkwood_sata.dev.platform_data = sata_data;
 	platform_device_register(&kirkwood_sata);
@@ -346,6 +398,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 	else
 		mvsdio_data->clock = 200000000;
 	mvsdio_data->dram = &kirkwood_mbus_dram_info;
+	kirkwood_clk_ctrl |= CGC_SDIO;
 	kirkwood_sdio.dev.platform_data = mvsdio_data;
 	platform_device_register(&kirkwood_sdio);
 }
@@ -377,6 +430,7 @@ static struct platform_device kirkwood_spi = {
 
 void __init kirkwood_spi_init()
 {
+	kirkwood_clk_ctrl |= CGC_RUNIT;
 	platform_device_register(&kirkwood_spi);
 }
 
@@ -507,6 +561,43 @@ void __init kirkwood_uart1_init(void)
 
 
 /*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+
+static struct resource kirkwood_crypto_res[] = {
+	{
+		.name   = "regs",
+		.start  = CRYPTO_PHYS_BASE,
+		.end    = CRYPTO_PHYS_BASE + 0xffff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "sram",
+		.start  = KIRKWOOD_SRAM_PHYS_BASE,
+		.end    = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "crypto interrupt",
+		.start  = IRQ_KIRKWOOD_CRYPTO,
+		.end    = IRQ_KIRKWOOD_CRYPTO,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_crypto_device = {
+	.name           = "mv_crypto",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(kirkwood_crypto_res),
+	.resource       = kirkwood_crypto_res,
+};
+
+void __init kirkwood_crypto_init(void)
+{
+	kirkwood_clk_ctrl |= CGC_CRYPTO;
+	platform_device_register(&kirkwood_crypto_device);
+}
+
+
+/*****************************************************************************
  * XOR
  ****************************************************************************/
 static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = {
@@ -597,6 +688,7 @@ static struct platform_device kirkwood_xor01_channel = {
 
 static void __init kirkwood_xor0_init(void)
 {
+	kirkwood_clk_ctrl |= CGC_XOR0;
 	platform_device_register(&kirkwood_xor0_shared);
 
 	/*
@@ -695,6 +787,7 @@ static struct platform_device kirkwood_xor11_channel = {
 
 static void __init kirkwood_xor1_init(void)
 {
+	kirkwood_clk_ctrl |= CGC_XOR1;
 	platform_device_register(&kirkwood_xor1_shared);
 
 	/*
@@ -713,6 +806,29 @@ static void __init kirkwood_xor1_init(void)
 
 
 /*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+static struct orion_wdt_platform_data kirkwood_wdt_data = {
+	.tclk		= 0,
+};
+
+static struct platform_device kirkwood_wdt_device = {
+	.name		= "orion_wdt",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &kirkwood_wdt_data,
+	},
+	.num_resources	= 0,
+};
+
+static void __init kirkwood_wdt_init(void)
+{
+	kirkwood_wdt_data.tclk = kirkwood_tclk;
+	platform_device_register(&kirkwood_wdt_device);
+}
+
+
+/*****************************************************************************
  * Time handling
  ****************************************************************************/
 int kirkwood_tclk;
@@ -804,6 +920,49 @@ void __init kirkwood_init(void)
 
 	/* internal devices that every board has */
 	kirkwood_rtc_init();
+	kirkwood_wdt_init();
 	kirkwood_xor0_init();
 	kirkwood_xor1_init();
+	kirkwood_crypto_init();
+}
+
+static int __init kirkwood_clock_gate(void)
+{
+	unsigned int curr = readl(CLOCK_GATING_CTRL);
+
+	printk(KERN_DEBUG "Gating clock of unused units\n");
+	printk(KERN_DEBUG "before: 0x%08x\n", curr);
+
+	/* Make sure those units are accessible */
+	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
+
+	/* For SATA: first shutdown the phy */
+	if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
+		/* Disable PLL and IVREF */
+		writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
+		/* Disable PHY */
+		writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
+	}
+	if (!(kirkwood_clk_ctrl & CGC_SATA1)) {
+		/* Disable PLL and IVREF */
+		writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
+		/* Disable PHY */
+		writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
+	}
+	
+	/* For PCIe: first shutdown the phy */
+	if (!(kirkwood_clk_ctrl & CGC_PEX0)) {
+		writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
+		while (1)
+			if (readl(PCIE_STATUS) & 0x1)
+				break;
+		writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
+	}
+
+	/* Now gate clock the required units */
+	writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
+	printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
+
+	return 0;
 }
+late_initcall(kirkwood_clock_gate);
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 6ee88406f38..d7de4346435 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -15,6 +15,7 @@ struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 struct mvsdio_platform_data;
+struct mtd_partition;
 
 /*
  * Basic Kirkwood init functions used early by machine-setup.
@@ -25,7 +26,6 @@ void kirkwood_init_irq(void);
 
 extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
 void kirkwood_setup_cpu_mbus(void);
-void kirkwood_setup_sram_win(u32 base, u32 size);
 
 void kirkwood_pcie_id(u32 *dev, u32 *rev);
 
@@ -40,9 +40,11 @@ void kirkwood_spi_init(void);
 void kirkwood_i2c_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
+void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 
 extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
 
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
 #endif
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
new file mode 100644
index 00000000000..f68d33f1f39
--- /dev/null
+++ b/arch/arm/mach-kirkwood/cpuidle.c
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and DDR self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and DDR self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+#include <mach/kirkwood.h>
+
+#define KIRKWOOD_MAX_STATES	2
+
+static struct cpuidle_driver kirkwood_idle_driver = {
+	.name =         "kirkwood_idle",
+	.owner =        THIS_MODULE,
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
+
+/* Actual code that puts the SoC in different idle states */
+static int kirkwood_enter_idle(struct cpuidle_device *dev,
+			       struct cpuidle_state *state)
+{
+	struct timeval before, after;
+	int idle_time;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+	if (state == &dev->states[0])
+		/* Wait for interrupt state */
+		cpu_do_idle();
+	else if (state == &dev->states[1]) {
+		/*
+		 * Following write will put DDR in self refresh.
+		 * Note that we have 256 cycles before DDR puts it
+		 * self in self-refresh, so the wait-for-interrupt
+		 * call afterwards won't get the DDR from self refresh
+		 * mode.
+		 */
+		writel(0x7, DDR_OPERATION_BASE);
+		cpu_do_idle();
+	}
+	do_gettimeofday(&after);
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+			(after.tv_usec - before.tv_usec);
+	return idle_time;
+}
+
+/* Initialize CPU idle by registering the idle states */
+static int kirkwood_init_cpuidle(void)
+{
+	struct cpuidle_device *device;
+
+	cpuidle_register_driver(&kirkwood_idle_driver);
+
+	device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
+	device->state_count = KIRKWOOD_MAX_STATES;
+
+	/* Wait for interrupt state */
+	device->states[0].enter = kirkwood_enter_idle;
+	device->states[0].exit_latency = 1;
+	device->states[0].target_residency = 10000;
+	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[0].name, "WFI");
+	strcpy(device->states[0].desc, "Wait for interrupt");
+
+	/* Wait for interrupt and DDR self refresh state */
+	device->states[1].enter = kirkwood_enter_idle;
+	device->states[1].exit_latency = 10;
+	device->states[1].target_residency = 10000;
+	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[1].name, "DDR SR");
+	strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+
+	if (cpuidle_register_device(device)) {
+		printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+device_initcall(kirkwood_init_cpuidle);
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 5505d583775..39bdf4bcace 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -11,14 +11,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/orion_nand.h>
 #include <plat/mvsdio.h>
 #include "common.h"
 #include "mpp.h"
@@ -39,32 +37,6 @@ static struct mtd_partition db88f6281_nand_parts[] = {
 	},
 };
 
-static struct resource db88f6281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-			  KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data db88f6281_nand_data = {
-	.parts		= db88f6281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(db88f6281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-	.chip_delay	= 25,
-};
-
-static struct platform_device db88f6281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &db88f6281_nand_data,
-	},
-	.resource	= &db88f6281_nand_resource,
-	.num_resources	= 1,
-};
-
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
@@ -92,13 +64,12 @@ static void __init db88f6281_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(db88f6281_mpp_config);
 
+	kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25);
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&db88f6281_ge00_data);
 	kirkwood_sata_init(&db88f6281_sata_data);
 	kirkwood_uart0_init();
 	kirkwood_sdio_init(&db88f6281_mvsdio_data);
-	
-	platform_device_register(&db88f6281_nand_flash);
 }
 
 static int __init db88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 4f7029f521c..9e80d9232c8 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -17,12 +17,15 @@
 #define CPU_RESET		0x00000002
 
 #define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define WDT_RESET_OUT_EN	0x00000002
 #define SOFT_RESET_OUT_EN	0x00000004
 
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
 #define SOFT_RESET		0x00000001
 
 #define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define WDT_INT_REQ		0x0008
+
 #define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
 #define BRIDGE_INT_TIMER0	0x0002
 #define BRIDGE_INT_TIMER1	0x0004
@@ -39,4 +42,22 @@
 #define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
 #define L2_WRITETHROUGH		0x00000010
 
+#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE | 0x11c)
+#define CGC_GE0			(1 << 0)
+#define CGC_PEX0		(1 << 2)
+#define CGC_USB0		(1 << 3)
+#define CGC_SDIO		(1 << 4)
+#define CGC_TSU			(1 << 5)
+#define CGC_DUNIT		(1 << 6)
+#define CGC_RUNIT		(1 << 7)
+#define CGC_XOR0		(1 << 8)
+#define CGC_AUDIO		(1 << 9)
+#define CGC_SATA0		(1 << 14)
+#define CGC_SATA1		(1 << 15)
+#define CGC_XOR1		(1 << 16)
+#define CGC_CRYPTO		(1 << 17)
+#define CGC_GE1			(1 << 19)
+#define CGC_TDM			(1 << 20)
+#define CGC_RESERVED		((1 << 18) | (0x6 << 21))
+
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index be07be0ef52..a643a846d5f 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -19,6 +19,31 @@ static inline void __iomem *__io(unsigned long addr)
 					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
 }
 
+static inline void __iomem *
+__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
+{
+	void __iomem *retval;
+	unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE;
+	if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE &&
+	    size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) {
+		retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs;
+	} else {
+		retval = __arm_ioremap(paddr, size, mtype);
+	}
+
+	return retval;
+}
+
+static inline void
+__arch_iounmap(void __iomem *addr)
+{
+	if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE ||
+	    addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE))
+		__iounmap(addr);
+}
+
+#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
+#define __arch_iounmap(a)	__arch_iounmap(a)
 #define __io(a)			__io(a)
 #define __mem_pci(a)		(a)
 
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index b3e13958821..07af858814a 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -20,16 +20,18 @@
  * f1000000	on-chip peripheral registers
  * f2000000	PCIe I/O space
  * f3000000	NAND controller address window
+ * f4000000	Security Accelerator SRAM
  *
  * virt		phys		size
  * fee00000	f1000000	1M	on-chip peripheral registers
  * fef00000	f2000000	1M	PCIe I/O space
  */
 
+#define KIRKWOOD_SRAM_PHYS_BASE		0xf4000000
+#define KIRKWOOD_SRAM_SIZE		SZ_2K
+
 #define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
-#define KIRKWOOD_NAND_MEM_SIZE		SZ_64K /* 1K is sufficient, but 64K
-						* is the minimal window size
-						*/
+#define KIRKWOOD_NAND_MEM_SIZE		SZ_1K
 
 #define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
 #define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
@@ -48,6 +50,7 @@
  */
 #define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
 #define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
+#define DDR_OPERATION_BASE	(DDR_VIRT_BASE | 0x1418)
 
 #define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
 #define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
@@ -63,7 +66,11 @@
 
 #define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
 
+#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
+
 #define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE | 0x70)
+#define PCIE_STATUS		(PCIE_VIRT_BASE | 0x1a04)
 
 #define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
 
@@ -80,6 +87,11 @@
 #define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
 
 #define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x80000)
+#define SATA0_IF_CTRL		(SATA_VIRT_BASE | 0x2050)
+#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE | 0x2330)
+#define SATA1_IF_CTRL		(SATA_VIRT_BASE | 0x4050)
+#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE | 0x4330)
 
 #define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
 
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 63c44934391..a5900f64e38 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -48,6 +48,9 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 	if (!variant_mask)
 		return;
 
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
 	printk(KERN_DEBUG "initial MPP regs:");
 	for (i = 0; i < MPP_NR_REGS; i++) {
 		mpp_ctrl[i] = readl(MPP_CTRL(i));
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
new file mode 100644
index 00000000000..0358f45766c
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+ *
+ * Marvell 88F6281 GTW GE Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
+static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &mv88f6281gtw_ge_switch_chip_data,
+};
+
+static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
+	.type		= "mx25l12805d",
+};
+
+static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &mv88f6281gtw_ge_spi_slave_data,
+		.irq		= -1,
+		.max_speed_hz	= 50000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 47,
+		.desc		= "SWR Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_F1,
+		.gpio		= 46,
+		.desc		= "WPS Button(F1)",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
+	.buttons	= mv88f6281gtw_ge_button_pins,
+	.nbuttons	= ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &mv88f6281gtw_ge_button_data,
+	},
+};
+
+static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
+	{
+		.name		= "gtw:green:Status",
+		.gpio		= 20,
+		.active_low	= 0,
+	}, {
+		.name		= "gtw:red:Status",
+		.gpio		= 21,
+		.active_low	= 0,
+	}, {
+		.name		= "gtw:green:USB",
+		.gpio		= 12,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
+	.leds		= mv88f6281gtw_ge_led_pins,
+	.num_leds	= ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &mv88f6281gtw_ge_led_data,
+	},
+};
+
+static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
+	MPP12_GPO,	/* Status#_USB pin  */
+	MPP20_GPIO,	/* Status#_GLED pin */
+	MPP21_GPIO,	/* Status#_RLED pin */
+	MPP46_GPIO,	/* WPS_Switch pin   */
+	MPP47_GPIO,	/* SW_Init pin      */
+	0
+};
+
+static void __init mv88f6281gtw_ge_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
+	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
+	spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
+				ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_uart0_init();
+	platform_device_register(&mv88f6281gtw_ge_leds);
+	platform_device_register(&mv88f6281gtw_ge_buttons);
+}
+
+static int __init mv88f6281gtw_ge_pci_init(void)
+{
+	if (machine_is_mv88f6281gtw_ge())
+		kirkwood_pcie_init();
+
+	return 0;
+}
+subsys_initcall(mv88f6281gtw_ge_pci_init);
+
+MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= mv88f6281gtw_ge_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 73fccacd1a7..d90b9aae308 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -14,6 +14,7 @@
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
+#include <mach/bridge-regs.h>
 #include "common.h"
 
 
@@ -95,6 +96,7 @@ static struct pci_ops pcie_ops = {
 static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct resource *res;
+	extern unsigned int kirkwood_clk_ctrl;
 
 	/*
 	 * Generic PCIe unit setup.
@@ -133,6 +135,8 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	sys->resource[2] = NULL;
 	sys->io_offset = 0;
 
+	kirkwood_clk_ctrl |= CGC_PEX0;
+
 	return 1;
 }
 
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 2f0e4ef3db0..8bf4153d084 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -11,8 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/spi/flash.h>
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 31e996d65fc..31708ddbc83 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
@@ -22,7 +21,6 @@
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -42,32 +40,6 @@ static struct mtd_partition rd88f6281_nand_parts[] = {
 	},
 };
 
-static struct resource rd88f6281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-			  KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data rd88f6281_nand_data = {
-	.parts		= rd88f6281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(rd88f6281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-	.chip_delay	= 25,
-};
-
-static struct platform_device rd88f6281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &rd88f6281_nand_data,
-	},
-	.resource	= &rd88f6281_nand_resource,
-	.num_resources	= 1,
-};
-
 static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_NONE,
 	.speed		= SPEED_1000,
@@ -114,6 +86,7 @@ static void __init rd88f6281_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(rd88f6281_mpp_config);
 
+	kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
@@ -129,8 +102,6 @@ static void __init rd88f6281_init(void)
 	kirkwood_sata_init(&rd88f6281_sata_data);
 	kirkwood_sdio_init(&rd88f6281_mvsdio_data);
 	kirkwood_uart0_init();
-
-	platform_device_register(&rd88f6281_nand_flash);
 }
 
 static int __init rd88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 831e4a56cae..c7319eeac8b 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
@@ -20,7 +19,6 @@
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -40,38 +38,12 @@ static struct mtd_partition sheevaplug_nand_parts[] = {
 	},
 };
 
-static struct resource sheevaplug_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-			  KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data sheevaplug_nand_data = {
-	.parts		= sheevaplug_nand_parts,
-	.nr_parts	= ARRAY_SIZE(sheevaplug_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-	.chip_delay	= 25,
-};
-
-static struct platform_device sheevaplug_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &sheevaplug_nand_data,
-	},
-	.resource	= &sheevaplug_nand_resource,
-	.num_resources	= 1,
-};
-
 static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
 static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
-	// unfortunately the CD signal has not been connected */
+	/* unfortunately the CD signal has not been connected */
 };
 
 static struct gpio_led sheevaplug_led_pins[] = {
@@ -111,6 +83,7 @@ static void __init sheevaplug_init(void)
 	kirkwood_mpp_conf(sheevaplug_mpp_config);
 
 	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
 
 	if (gpio_request(29, "USB Power Enable") != 0 ||
 	    gpio_direction_output(29, 1) != 0)
@@ -120,7 +93,6 @@ static void __init sheevaplug_init(void)
 	kirkwood_ge00_init(&sheevaplug_ge00_data);
 	kirkwood_sdio_init(&sheevaplug_mvsdio_data);
 
-	platform_device_register(&sheevaplug_nand_flash);
 	platform_device_register(&sheevaplug_leds);
 }
 
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index e83e45ebf7a..16295cfd5e2 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -52,6 +52,7 @@
 /*
  * Interrupt numbers for PXA910
  */
+#define IRQ_PXA910_NONE			(-1)
 #define IRQ_PXA910_AIRQ			0
 #define IRQ_PXA910_SSP3			1
 #define IRQ_PXA910_SSP2			2
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 2e914649b9e..3b216bf41e7 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -253,6 +253,10 @@
 #define GPIO58_LCD_PCLK_WR	MFP_CFG(GPIO58, AF1)
 #define GPIO85_LCD_VSYNC	MFP_CFG(GPIO85, AF1)
 
+/* I2C */
+#define GPIO105_CI2C_SDA	MFP_CFG(GPIO105, AF1)
+#define GPIO106_CI2C_SCL	MFP_CFG(GPIO106, AF1)
+
 /* I2S */
 #define GPIO113_I2S_MCLK	MFP_CFG(GPIO113,AF6)
 #define GPIO114_I2S_FRM		MFP_CFG(GPIO114,AF1)
@@ -260,4 +264,27 @@
 #define GPIO116_I2S_RXD		MFP_CFG(GPIO116,AF2)
 #define GPIO117_I2S_TXD		MFP_CFG(GPIO117,AF2)
 
+/* PWM */
+#define GPIO96_PWM3_OUT		MFP_CFG(GPIO96, AF1)
+#define GPIO97_PWM2_OUT		MFP_CFG(GPIO97, AF1)
+#define GPIO98_PWM1_OUT		MFP_CFG(GPIO98, AF1)
+#define GPIO104_PWM4_OUT	MFP_CFG(GPIO104, AF1)
+#define GPIO106_PWM2_OUT	MFP_CFG(GPIO106, AF2)
+#define GPIO74_PWM4_OUT		MFP_CFG(GPIO74, AF2)
+#define GPIO75_PWM3_OUT		MFP_CFG(GPIO75, AF2)
+#define GPIO76_PWM2_OUT		MFP_CFG(GPIO76, AF2)
+#define GPIO77_PWM1_OUT		MFP_CFG(GPIO77, AF2)
+#define GPIO82_PWM4_OUT		MFP_CFG(GPIO82, AF2)
+#define GPIO83_PWM3_OUT		MFP_CFG(GPIO83, AF2)
+#define GPIO84_PWM2_OUT		MFP_CFG(GPIO84, AF2)
+#define GPIO85_PWM1_OUT		MFP_CFG(GPIO85, AF2)
+#define GPIO84_PWM1_OUT		MFP_CFG(GPIO84, AF4)
+#define GPIO122_PWM3_OUT	MFP_CFG(GPIO122, AF3)
+#define GPIO123_PWM1_OUT	MFP_CFG(GPIO123, AF1)
+#define GPIO124_PWM2_OUT	MFP_CFG(GPIO124, AF1)
+#define GPIO125_PWM3_OUT	MFP_CFG(GPIO125, AF1)
+#define GPIO126_PWM4_OUT	MFP_CFG(GPIO126, AF1)
+#define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
+#define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
+
 #endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
index d97de36c50a..bf1189ff9a3 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -159,4 +159,12 @@
 #define MMC1_CD_MMC1_CD		MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
 #define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
 
+/* PWM */
+#define GPIO27 PWM3 AF2		MFP_CFG(GPIO27, AF2)
+#define GPIO51_PWM2_OUT		MFP_CFG(GPIO51, AF2)
+#define GPIO117_PWM1_OUT	MFP_CFG(GPIO117, AF2)
+#define GPIO118_PWM2_OUT	MFP_CFG(GPIO118, AF2)
+#define GPIO119_PWM3_OUT	MFP_CFG(GPIO119, AF2)
+#define GPIO120_PWM4_OUT	MFP_CFG(GPIO120, AF2)
+
 #endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index ef0a8a2076e..6bf1f0eefcd 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -1,10 +1,18 @@
 #ifndef __ASM_MACH_PXA168_H
 #define __ASM_MACH_PXA168_H
 
+#include <linux/i2c.h>
 #include <mach/devices.h>
+#include <plat/i2c.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
+extern struct pxa_device_desc pxa168_device_twsi0;
+extern struct pxa_device_desc pxa168_device_twsi1;
+extern struct pxa_device_desc pxa168_device_pwm1;
+extern struct pxa_device_desc pxa168_device_pwm2;
+extern struct pxa_device_desc pxa168_device_pwm3;
+extern struct pxa_device_desc pxa168_device_pwm4;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -20,4 +28,40 @@ static inline int pxa168_add_uart(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data,
+				  struct i2c_board_info *info, unsigned size)
+{
+	struct pxa_device_desc *d = NULL;
+	int ret;
+
+	switch (id) {
+	case 0: d = &pxa168_device_twsi0; break;
+	case 1: d = &pxa168_device_twsi1; break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = i2c_register_board_info(id, info, size);
+	if (ret)
+		return ret;
+
+	return pxa_register_device(d, data, sizeof(*data));
+}
+
+static inline int pxa168_add_pwm(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa168_device_pwm1; break;
+	case 2: d = &pxa168_device_pwm2; break;
+	case 3: d = &pxa168_device_pwm3; break;
+	case 4: d = &pxa168_device_pwm4; break;
+	default:
+		return -EINVAL;
+	}
+
+	return pxa_register_device(d, NULL, 0);
+}
 #endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index b7aeaf574c3..6ae1ed7a0a9 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -1,10 +1,18 @@
 #ifndef __ASM_MACH_PXA910_H
 #define __ASM_MACH_PXA910_H
 
+#include <linux/i2c.h>
 #include <mach/devices.h>
+#include <plat/i2c.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
+extern struct pxa_device_desc pxa910_device_twsi0;
+extern struct pxa_device_desc pxa910_device_twsi1;
+extern struct pxa_device_desc pxa910_device_pwm1;
+extern struct pxa_device_desc pxa910_device_pwm2;
+extern struct pxa_device_desc pxa910_device_pwm3;
+extern struct pxa_device_desc pxa910_device_pwm4;
 
 static inline int pxa910_add_uart(int id)
 {
@@ -20,4 +28,40 @@ static inline int pxa910_add_uart(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data,
+				  struct i2c_board_info *info, unsigned size)
+{
+	struct pxa_device_desc *d = NULL;
+	int ret;
+
+	switch (id) {
+	case 0: d = &pxa910_device_twsi0; break;
+	case 1: d = &pxa910_device_twsi1; break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = i2c_register_board_info(id, info, size);
+	if (ret)
+		return ret;
+
+	return pxa_register_device(d, data, sizeof(*data));
+}
+
+static inline int pxa910_add_pwm(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa910_device_pwm1; break;
+	case 2: d = &pxa910_device_pwm2; break;
+	case 3: d = &pxa910_device_pwm3; break;
+	case 4: d = &pxa910_device_pwm4; break;
+	default:
+		return -EINVAL;
+	}
+
+	return pxa_register_device(d, NULL, 0);
+}
 #endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index c6b8c9dc202..98ccbee4bd0 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -22,8 +22,10 @@
 #define APBC_PXA168_UART1	APBC_REG(0x000)
 #define APBC_PXA168_UART2	APBC_REG(0x004)
 #define APBC_PXA168_GPIO	APBC_REG(0x008)
-#define APBC_PXA168_PWM0	APBC_REG(0x00c)
-#define APBC_PXA168_PWM1	APBC_REG(0x010)
+#define APBC_PXA168_PWM1	APBC_REG(0x00c)
+#define APBC_PXA168_PWM2	APBC_REG(0x010)
+#define APBC_PXA168_PWM3	APBC_REG(0x014)
+#define APBC_PXA168_PWM4	APBC_REG(0x018)
 #define APBC_PXA168_SSP1	APBC_REG(0x01c)
 #define APBC_PXA168_SSP2	APBC_REG(0x020)
 #define APBC_PXA168_RTC		APBC_REG(0x028)
@@ -48,10 +50,10 @@
 #define APBC_PXA910_UART0	APBC_REG(0x000)
 #define APBC_PXA910_UART1	APBC_REG(0x004)
 #define APBC_PXA910_GPIO	APBC_REG(0x008)
-#define APBC_PXA910_PWM0	APBC_REG(0x00c)
-#define APBC_PXA910_PWM1	APBC_REG(0x010)
-#define APBC_PXA910_PWM2	APBC_REG(0x014)
-#define APBC_PXA910_PWM3	APBC_REG(0x018)
+#define APBC_PXA910_PWM1	APBC_REG(0x00c)
+#define APBC_PXA910_PWM2	APBC_REG(0x010)
+#define APBC_PXA910_PWM3	APBC_REG(0x014)
+#define APBC_PXA910_PWM4	APBC_REG(0x018)
 #define APBC_PXA910_SSP1	APBC_REG(0x01c)
 #define APBC_PXA910_SSP2	APBC_REG(0x020)
 #define APBC_PXA910_IPC		APBC_REG(0x024)
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index ae924468658..71b1ae33875 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -65,11 +65,23 @@ void __init pxa168_init_irq(void)
 /* APB peripheral clocks */
 static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
 static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
 	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
+	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
+	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
+	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -109,3 +121,9 @@ struct sys_timer pxa168_timer = {
 /* on-chip devices */
 PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
 PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
+PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
+PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
+PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
+PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
+PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
+PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 453f8f7758b..5882ca6b49f 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -103,11 +103,23 @@ void __init pxa910_init_irq(void)
 /* APB peripheral clocks */
 static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
 static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
+static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
 	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
+	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
+	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
+	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
 };
 
 static int __init pxa910_init(void)
@@ -156,3 +168,9 @@ struct sys_timer pxa910_timer = {
  */
 PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
 PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
+PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
+PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
+PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
+PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
+PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
+PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index f289b0ea7dc..22b4ff893b3 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -28,6 +28,9 @@ void __init mv78xx0_init_irq(void)
 {
 	int i;
 
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
 	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
 	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
 	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 0dec6f300ff..7622c9b38c9 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -26,6 +26,7 @@
 
 #include <asm/mach/map.h>
 
+#include <mach/common.h>
 #include <mach/hardware.h>
 
 static struct map_desc imx_io_desc[] __initdata = {
@@ -37,7 +38,9 @@ static struct map_desc imx_io_desc[] __initdata = {
 	}
 };
 
-void __init mxc_map_io(void)
+void __init mx1_map_io(void)
 {
+	mxc_set_cpu_type(MXC_CPU_MX1);
+
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e54057fb855..e5b0c0a83c3 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -12,77 +12,56 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#include <mach/irqs.h>
-#include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
+#include <mach/hardware.h>
 #include <mach/i2c.h>
+#include <mach/imx-uart.h>
 #include <mach/iomux.h>
+#include <mach/irqs.h>
+
 #include "devices.h"
 
-/*
- * UARTs platform data
- */
-static int mxc_uart1_pins[] = {
+static int mx1ads_pins[] = {
+	/* UART1 */
 	PC9_PF_UART1_CTS,
 	PC10_PF_UART1_RTS,
 	PC11_PF_UART1_TXD,
 	PC12_PF_UART1_RXD,
-};
-
-static int uart1_mxc_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart1_mxc_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static int mxc_uart2_pins[] = {
+	/* UART2 */
 	PB28_PF_UART2_CTS,
 	PB29_PF_UART2_RTS,
 	PB30_PF_UART2_TXD,
 	PB31_PF_UART2_RXD,
+	/* I2C */
+	PA15_PF_I2C_SDA,
+	PA16_PF_I2C_SCL,
+	/* SPI */
+	PC13_PF_SPI1_SPI_RDY,
+	PC14_PF_SPI1_SCLK,
+	PC15_PF_SPI1_SS,
+	PC16_PF_SPI1_MISO,
+	PC17_PF_SPI1_MOSI,
 };
 
-static int uart2_mxc_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart2_mxc_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins));
-	return 0;
-}
+/*
+ * UARTs platform data
+ */
 
 static struct imxuart_platform_data uart_pdata[] = {
 	{
-		.init = uart1_mxc_init,
-		.exit = uart1_mxc_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart2_mxc_init,
-		.exit = uart2_mxc_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
@@ -111,24 +90,6 @@ static struct platform_device flash_device = {
 /*
  * I2C
  */
-
-static int i2c_pins[] = {
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-};
-
-static int i2c_init(struct device *dev)
-{
-	return mxc_gpio_setup_multiple_pins(i2c_pins,
-			ARRAY_SIZE(i2c_pins), "I2C");
-}
-
-static void i2c_exit(struct device *dev)
-{
-	mxc_gpio_release_multiple_pins(i2c_pins,
-			ARRAY_SIZE(i2c_pins));
-}
-
 static struct pcf857x_platform_data pcf857x_data[] = {
 	{
 		.gpio_base = 4 * 32,
@@ -139,8 +100,6 @@ static struct pcf857x_platform_data pcf857x_data[] = {
 
 static struct imxi2c_platform_data mx1ads_i2c_data = {
 	.bitrate = 100000,
-	.init = i2c_init,
-	.exit = i2c_exit,
 };
 
 static struct i2c_board_info mx1ads_i2c_devices[] = {
@@ -160,6 +119,9 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
  */
 static void __init mx1ads_init(void)
 {
+	mxc_gpio_setup_multiple_pins(mx1ads_pins,
+		ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
 	/* UART */
 	mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
 	mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
@@ -188,7 +150,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
-	.map_io		= mxc_map_io,
+	.map_io		= mx1_map_io,
 	.init_irq	= mxc_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
@@ -198,7 +160,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
-	.map_io		= mxc_map_io,
+	.map_io		= mx1_map_io,
 	.init_irq	= mxc_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 0e71f3fa28b..20e0b5bcdff 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -153,7 +153,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.phys_io	= 0x00200000,
 	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
 	.boot_params	= 0x08000100,
-	.map_io		= mxc_map_io,
+	.map_io		= mx1_map_io,
 	.init_irq	= mxc_init_irq,
 	.timer		= &scb9328_timer,
 	.init_machine	= scb9328_init,
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 42a788842f4..c77da586b71 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -18,6 +18,13 @@ endchoice
 
 comment "MX2 platforms:"
 
+config MACH_MX21ADS
+	bool "MX21ADS platform"
+	depends on MACH_MX21
+	help
+	  Include support for MX21ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
 config MACH_MX27ADS
 	bool "MX27ADS platform"
 	depends on MACH_MX27
@@ -46,4 +53,18 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
+config MACH_MX27_3DS
+	bool "MX27PDK platform"
+	depends on MACH_MX27
+	help
+	  Include support for MX27PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX27LITE
+	bool "LogicPD MX27 LITEKIT platform"
+	depends on MACH_MX27
+	help
+	  Include support for MX27 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 950649a9154..b9b1cca4e9b 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -11,6 +11,10 @@ obj-$(CONFIG_MACH_MX21) += clock_imx21.o
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
 obj-$(CONFIG_MACH_MX27) += clock_imx27.o
 
+obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
 obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
+obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
+
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index e4b08ca804e..0850fb88ec1 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -48,6 +48,25 @@ static void _clk_disable(struct clk *clk)
 	__raw_writel(reg, clk->enable_reg);
 }
 
+static unsigned long _clk_generic_round_rate(struct clk *clk,
+			unsigned long rate,
+			u32 max_divisor)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > max_divisor)
+		div = max_divisor;
+
+	return parent_rate / div;
+}
+
 static int _clk_spll_enable(struct clk *clk)
 {
 	u32 reg;
@@ -78,19 +97,7 @@ static void _clk_spll_disable(struct clk *clk)
 static unsigned long _clk_perclkx_round_rate(struct clk *clk,
 					     unsigned long rate)
 {
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 64)
-		div = 64;
-
-	return parent_rate / div;
+	return _clk_generic_round_rate(clk, rate, 64);
 }
 
 static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
@@ -130,6 +137,32 @@ static unsigned long _clk_usb_recalc(struct clk *clk)
 	return parent_rate / (usb_pdf + 1U);
 }
 
+static unsigned long _clk_usb_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	return _clk_generic_round_rate(clk, rate, 8);
+}
+
+static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = CSCR() & ~CCM_CSCR_USB_MASK;
+	reg |= div << CCM_CSCR_USB_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
 static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
 {
 	unsigned long parent_rate;
@@ -595,11 +628,14 @@ static struct clk csi_clk[] = {
 static struct clk usb_clk[] = {
 	{
 		.parent = &spll_clk,
+		.secondary = &usb_clk[1],
 		.get_rate = _clk_usb_recalc,
 		.enable = _clk_enable,
 		.enable_reg = CCM_PCCR_USBOTG_REG,
 		.enable_shift = CCM_PCCR_USBOTG_OFFSET,
 		.disable = _clk_disable,
+		.round_rate = _clk_usb_round_rate,
+		.set_rate = _clk_usb_set_rate,
 	}, {
 		.parent = &hclk_clk,
 		.enable = _clk_enable,
@@ -768,18 +804,7 @@ static struct clk rtc_clk = {
 
 static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
 {
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 8)
-		div = 8;
-
-	return parent_rate / div;
+	return _clk_generic_round_rate(clk, rate, 8);
 }
 
 static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
@@ -921,7 +946,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
 	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
-	_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
+	_REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index bd51dd04948..169372f69d8 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -69,7 +69,17 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual
  * memory map for the IO modules.
  */
-void __init mxc_map_io(void)
+void __init mx21_map_io(void)
 {
+	mxc_set_cpu_type(MXC_CPU_MX21);
+
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+
+void __init mx27_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX27);
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
new file mode 100644
index 00000000000..a5ee461cb40
--- /dev/null
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -0,0 +1,286 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#include <mach/board-mx21ads.h>
+
+#include "devices.h"
+
+static unsigned int mx21ads_pins[] = {
+
+	/* CS8900A */
+	(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
+
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+
+	/* UART3 (IrDA) - only TXD and RXD */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+
+	/* LCDC */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA24_PF_REV,     /* Sharp panel dedicated signal */
+	PA25_PF_CLS,     /* Sharp panel dedicated signal */
+	PA26_PF_PS,      /* Sharp panel dedicated signal */
+	PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+
+	/* MMC/SDHC */
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+
+	/* NFC */
+	PF0_PF_NRFB,
+	PF1_PF_NFCE,
+	PF2_PF_NFWP,
+	PF3_PF_NFCLE,
+	PF4_PF_NFALE,
+	PF5_PF_NFRE,
+	PF6_PF_NFWE,
+	PF7_PF_NFIO0,
+	PF8_PF_NFIO1,
+	PF9_PF_NFIO2,
+	PF10_PF_NFIO3,
+	PF11_PF_NFIO4,
+	PF12_PF_NFIO5,
+	PF13_PF_NFIO6,
+	PF14_PF_NFIO7,
+};
+
+/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
+static struct physmap_flash_data mx21ads_flash_data = {
+	.width = 4,
+};
+
+static struct resource mx21ads_flash_resource = {
+	.start = CS0_BASE_ADDR,
+	.end = CS0_BASE_ADDR + 0x02000000 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx21ads_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &mx21ads_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &mx21ads_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxuart_platform_data uart_norts_pdata = {
+};
+
+
+static int mx21ads_fb_init(struct platform_device *pdev)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(MX21ADS_IO_REG);
+	tmp |= MX21ADS_IO_LCDON;
+	__raw_writew(tmp, MX21ADS_IO_REG);
+	return 0;
+}
+
+static void mx21ads_fb_exit(struct platform_device *pdev)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(MX21ADS_IO_REG);
+	tmp &= ~MX21ADS_IO_LCDON;
+	__raw_writew(tmp, MX21ADS_IO_REG);
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DB02
+ */
+static struct imx_fb_platform_data mx21ads_fb_data = {
+	.pixclock       = 188679, /* in ps */
+	.xres           = 240,
+	.yres           = 320,
+
+	.bpp            = 16,
+	.hsync_len      = 2,
+	.left_margin    = 6,
+	.right_margin   = 16,
+
+	.vsync_len      = 1,
+	.upper_margin   = 8,
+	.lower_margin   = 10,
+	.fixed_screen_cpu = 0,
+
+	.pcr            = 0xFB108BC7,
+	.pwmr           = 0x00A901ff,
+	.lscr1          = 0x00120300,
+	.dmacr          = 0x00020008,
+
+	.init = mx21ads_fb_init,
+	.exit = mx21ads_fb_exit,
+};
+
+static int mx21ads_sdhc_get_ro(struct device *dev)
+{
+	return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+}
+
+static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
+	void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOD(25), detect_irq,
+		IRQF_TRIGGER_FALLING, "mmc-detect", data);
+	if (ret)
+		goto out;
+	return 0;
+out:
+	return ret;
+}
+
+static void mx21ads_sdhc_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOD(25), data);
+}
+
+static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
+	.get_ro = mx21ads_sdhc_get_ro,
+	.init = mx21ads_sdhc_init,
+	.exit = mx21ads_sdhc_exit,
+};
+
+static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct map_desc mx21ads_io_desc[] __initdata = {
+	/*
+	 * Memory-mapped I/O on MX21ADS Base board:
+	 *   - CS8900A Ethernet controller
+	 *   - ST16C2552CJ UART
+	 *   - CPU and Base board version
+	 *   - Base board I/O register
+	 */
+	{
+		.virtual = MX21ADS_MMIO_BASE_ADDR,
+		.pfn = __phys_to_pfn(CS1_BASE_ADDR),
+		.length = MX21ADS_MMIO_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+static void __init mx21ads_map_io(void)
+{
+	mx21_map_io();
+	iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mx21ads_nor_mtd_device,
+};
+
+static void __init mx21ads_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
+			"mx21ads");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
+	mxc_register_device(&mxc_uart_device3, &uart_pdata);
+	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+	mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx21ads_timer_init(void)
+{
+	mx21_clocks_init(32768, 26000000);
+}
+
+static struct sys_timer mx21ads_timer = {
+	.init	= mx21ads_timer_init,
+};
+
+MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx21ads_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx21ads_board_init,
+	.timer          = &mx21ads_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 4a3b097adc1..02daddac699 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,6 +23,8 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -33,9 +35,117 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux.h>
 #include <mach/board-mx27ads.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int mx27ads_pins[] = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART3 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* UART4 */
+	PB18_AF_UART5_TXD,
+	PB19_AF_UART5_RXD,
+	PB20_AF_UART5_CTS,
+	PB21_AF_UART5_RTS,
+	/* UART5 */
+	PB10_AF_UART6_TXD,
+	PB12_AF_UART6_CTS,
+	PB11_AF_UART6_RXD,
+	PB13_AF_UART6_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA24_PF_REV,
+	PA25_PF_CLS,
+	PA26_PF_PS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 /* ADS's NOR flash */
 static struct physmap_flash_data mx27ads_flash_data = {
 	.width = 2,
@@ -58,189 +168,113 @@ static struct platform_device mx27ads_nor_mtd_device = {
 	.resource = &mx27ads_flash_resource,
 };
 
-static int mxc_uart0_pins[] = {
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+	.bitrate = 100000,
 };
 
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins));
-	return 0;
-}
-
-static int mxc_uart1_pins[] = {
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD
+static struct i2c_board_info mx27ads_i2c_devices[] = {
 };
 
-static int uart_mxc_port1_init(struct platform_device *pdev)
+void lcd_power(int on)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
+	if (on)
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+	else
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static int mxc_uart2_pins[] = {
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.pixclock	= 188679,
+	.xres		= 240,
+	.yres		= 320,
+
+	.bpp		= 16,
+	.hsync_len	= 1,
+	.left_margin	= 9,
+	.right_margin	= 16,
+
+	.vsync_len	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 9,
+	.fixed_screen_cpu = 0,
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pcr		= 0xFB008BC0,
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+
+	.lcd_power	= lcd_power,
 };
 
-static int uart_mxc_port2_init(struct platform_device *pdev)
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins), "UART2");
+	return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc1-card-detect", data);
 }
 
-static int uart_mxc_port2_exit(struct platform_device *pdev)
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
 {
-	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins));
-	return 0;
+	return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc2-card-detect", data);
 }
 
-static int mxc_uart3_pins[] = {
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD
-};
-
-static int uart_mxc_port3_init(struct platform_device *pdev)
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
-			ARRAY_SIZE(mxc_uart3_pins), "UART3");
+	free_irq(IRQ_GPIOE(21), data);
 }
 
-static int uart_mxc_port3_exit(struct platform_device *pdev)
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
 {
-	mxc_gpio_release_multiple_pins(mxc_uart3_pins,
-			ARRAY_SIZE(mxc_uart3_pins));
-	return 0;
+	free_irq(IRQ_GPIOB(7), data);
 }
 
-static int mxc_uart4_pins[] = {
-	PB18_AF_UART5_TXD,
-	PB19_AF_UART5_RXD,
-	PB20_AF_UART5_CTS,
-	PB21_AF_UART5_RTS
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mx27ads_sdhc1_init,
+	.exit = mx27ads_sdhc1_exit,
 };
 
-static int uart_mxc_port4_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
-			ARRAY_SIZE(mxc_uart4_pins), "UART4");
-}
-
-static int uart_mxc_port4_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart4_pins,
-			ARRAY_SIZE(mxc_uart4_pins));
-	return 0;
-}
-
-static int mxc_uart5_pins[] = {
-	PB10_AF_UART6_TXD,
-	PB12_AF_UART6_CTS,
-	PB11_AF_UART6_RXD,
-	PB13_AF_UART6_RTS
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.init = mx27ads_sdhc2_init,
+	.exit = mx27ads_sdhc2_exit,
 };
 
-static int uart_mxc_port5_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
-			ARRAY_SIZE(mxc_uart5_pins), "UART5");
-}
-
-static int uart_mxc_port5_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart5_pins,
-			ARRAY_SIZE(mxc_uart5_pins));
-	return 0;
-}
-
 static struct platform_device *platform_devices[] __initdata = {
 	&mx27ads_nor_mtd_device,
 	&mxc_fec_device,
+	&mxc_w1_master_device,
 };
 
-static int mxc_fec_pins[] = {
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
-	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
 static struct imxuart_platform_data uart_pdata[] = {
 	{
-		.init = uart_mxc_port0_init,
-		.exit = uart_mxc_port0_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port1_init,
-		.exit = uart_mxc_port1_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port2_init,
-		.exit = uart_mxc_port2_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port3_init,
-		.exit = uart_mxc_port3_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port4_init,
-		.exit = uart_mxc_port4_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port5_init,
-		.exit = uart_mxc_port5_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
 static void __init mx27ads_board_init(void)
 {
-	gpio_fec_active();
+	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+			"mx27ads");
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
@@ -248,6 +282,15 @@ static void __init mx27ads_board_init(void)
 	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
 	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
 	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+	mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, mx27ads_i2c_devices,
+				ARRAY_SIZE(mx27ads_i2c_devices));
+	mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
@@ -277,7 +320,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = {
 
 static void __init mx27ads_map_io(void)
 {
-	mxc_map_io();
+	mx27_map_io();
 	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
 }
 
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
new file mode 100644
index 00000000000..3ae11cb8c04
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27lite.h>
+
+#include "devices.h"
+
+static unsigned int mx27lite_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static void __init mx27lite_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
+		"imx27lite");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27lite_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27lite_timer = {
+	.init	= mx27lite_timer_init,
+};
+
+MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx27lite_init,
+	.timer          = &mx27lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
new file mode 100644
index 00000000000..1d9238c7a6c
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27pdk.h>
+
+#include "devices.h"
+
+static unsigned int mx27pdk_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static void __init mx27pdk_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+		"mx27pdk");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+	.init	= mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx27pdk_init,
+	.timer          = &mx27pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index aa4eaa61d1b..a4628d00434 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -17,28 +17,84 @@
  * MA 02110-1301, USA.
  */
 
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
 
-#include <asm/mach/arch.h>
 #include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-pcm038.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/iomux.h>
-#ifdef CONFIG_I2C_IMX
 #include <mach/i2c.h>
-#endif
-#include <asm/mach/time.h>
+#include <mach/iomux.h>
 #include <mach/imx-uart.h>
-#include <mach/board-pcm038.h>
 #include <mach/mxc_nand.h>
 
 #include "devices.h"
 
+static int pcm038_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD27_PF_CSPI1_SS1,
+	PD28_PF_CSPI1_SS0,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* SSI4 */
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD,
+	PC18_PF_SSI4_TXD,
+	PC19_PF_SSI4_CLK,
+};
+
 /*
  * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
  * 16 bit width
@@ -88,107 +144,16 @@ static struct platform_device pcm038_nor_mtd_device = {
 	.resource = &pcm038_flash_resource,
 };
 
-static int mxc_uart0_pins[] = {
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS
-};
-
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins));
-	return 0;
-}
-
-static int mxc_uart1_pins[] = {
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD
-};
-
-static int uart_mxc_port1_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
-				PE9_PF_UART3_RXD,
-				PE10_PF_UART3_CTS,
-				PE11_PF_UART3_RTS };
-
-static int uart_mxc_port2_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart_mxc_port2_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins));
-	return 0;
-}
-
 static struct imxuart_platform_data uart_pdata[] = {
 	{
-		.init = uart_mxc_port0_init,
-		.exit = uart_mxc_port0_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port1_init,
-		.exit = uart_mxc_port1_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port2_init,
-		.exit = uart_mxc_port2_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
-static int mxc_fec_pins[] = {
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
-	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
 static struct mxc_nand_platform_data pcm038_nand_board_info = {
 	.width = 1,
 	.hw_ecc = 1,
@@ -210,27 +175,8 @@ static void __init pcm038_init_sram(void)
 	__raw_writel(0x22220a00, CSCR_A(1));
 }
 
-#ifdef CONFIG_I2C_IMX
-static int mxc_i2c1_pins[] = {
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL
-};
-
-static int pcm038_i2c_1_init(struct device *dev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
-			"I2C1");
-}
-
-static void pcm038_i2c_1_exit(struct device *dev)
-{
-	mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
-}
-
 static struct imxi2c_platform_data pcm038_i2c_1_data = {
 	.bitrate = 100000,
-	.init = pcm038_i2c_1_init,
-	.exit = pcm038_i2c_1_exit,
 };
 
 static struct at24_platform_data board_eeprom = {
@@ -253,11 +199,12 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
 		.type = "lm75"
 	}
 };
-#endif
 
 static void __init pcm038_init(void)
 {
-	gpio_fec_active();
+	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
+			"PCM038");
+
 	pcm038_init_sram();
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
@@ -267,13 +214,11 @@ static void __init pcm038_init(void)
 	mxc_gpio_mode(PE16_AF_OWIRE);
 	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
 
-#ifdef CONFIG_I2C_IMX
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pcm038_i2c_devices,
 				ARRAY_SIZE(pcm038_i2c_devices));
 
 	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
-#endif
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
@@ -295,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.phys_io        = AIPI_BASE_ADDR,
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx27_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = pcm038_init,
 	.timer          = &pcm038_timer,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index bf4e520bc1b..6a3acaf57dd 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -16,71 +16,107 @@
  * MA 02110-1301, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/mmc.h>
-#include <mach/imxfb.h>
 #include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_pins[] = {
+static int pcm970_pins[] = {
+	/* SDHC */
 	PB4_PF_SD2_D0,
 	PB5_PF_SD2_D1,
 	PB6_PF_SD2_D2,
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
+	GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA24_PF_REV,
+	PA25_PF_CLS,
+	PA26_PF_PS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/*
+	 * it seems the data line misses a pullup, so we must enable
+	 * the internal pullup as a local workaround
+	 */
+	PD17_PF_I2C_DATA | GPIO_PUEN,
+	PD18_PF_I2C_CLK,
+	/* Camera */
+	PB10_PF_CSI_D0,
+	PB11_PF_CSI_D1,
+	PB12_PF_CSI_D2,
+	PB13_PF_CSI_D3,
+	PB14_PF_CSI_D4,
+	PB15_PF_CSI_MCLK,
+	PB16_PF_CSI_PIXCLK,
+	PB17_PF_CSI_D5,
+	PB18_PF_CSI_D6,
+	PB19_PF_CSI_D7,
+	PB20_PF_CSI_VSYNC,
+	PB21_PF_CSI_HSYNC,
 };
 
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_PORTC + 28);
+}
+
 static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
 {
 	int ret;
 
-	ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
-		ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
-	if(ret)
-		return ret;
-
-	ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+	ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
 				"imx-mmc-detect", data);
 	if (ret)
-		goto out_release_gpio;
-
-	set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+		return ret;
 
 	ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
-	if (ret)
-		goto out_release_gpio;
+	if (ret) {
+		free_irq(IRQ_GPIOC(29), data);
+		return ret;
+	}
 
-	mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
 	gpio_direction_input(GPIO_PORTC + 28);
 
 	return 0;
-
-out_release_gpio:
-	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
-			ARRAY_SIZE(pcm970_sdhc2_pins));
-	return ret;
 }
 
 static void pcm970_sdhc2_exit(struct device *dev, void *data)
 {
 	free_irq(IRQ_GPIOC(29), data);
 	gpio_free(GPIO_PORTC + 28);
-	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
-			ARRAY_SIZE(pcm970_sdhc2_pins));
 }
 
 static struct imxmmc_platform_data sdhc_pdata = {
@@ -89,29 +125,6 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc2_exit,
 };
 
-static int mxc_fb_pins[] = {
-	PA5_PF_LSCLK,	PA6_PF_LD0,	PA7_PF_LD1,	PA8_PF_LD2,
-	PA9_PF_LD3,	PA10_PF_LD4,	PA11_PF_LD5,	PA12_PF_LD6,
-	PA13_PF_LD7,	PA14_PF_LD8,	PA15_PF_LD9,	PA16_PF_LD10,
-	PA17_PF_LD11,	PA18_PF_LD12,	PA19_PF_LD13,	PA20_PF_LD14,
-	PA21_PF_LD15,	PA22_PF_LD16,	PA23_PF_LD17,	PA24_PF_REV,
-	PA25_PF_CLS,	PA26_PF_PS,	PA27_PF_SPL_SPR, PA28_PF_HSYNC,
-	PA29_PF_VSYNC,	PA30_PF_CONTRAST, PA31_PF_OE_ACD
-};
-
-static int pcm038_fb_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
-			ARRAY_SIZE(mxc_fb_pins), "FB");
-}
-
-static int pcm038_fb_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
-
-	return 0;
-}
-
 /*
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DH06
@@ -144,9 +157,6 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
-
-	.init = pcm038_fb_init,
-	.exit = pcm038_fb_exit,
 };
 
 /*
@@ -157,6 +167,9 @@ static struct imx_fb_platform_data pcm038_fb_data = {
  */
 void __init pcm970_baseboard_init(void)
 {
+	mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
+			"PCM970");
+
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 }
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 194b8428bba..17a21a291e2 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,10 +1,12 @@
 if ARCH_MX3
 
 config ARCH_MX31
+	select ARCH_HAS_RNGA
 	bool
 
 config ARCH_MX35
 	bool
+	select ARCH_MXC_IOMUX_V3
 
 comment "MX3 platforms:"
 
@@ -37,7 +39,6 @@ config MACH_PCM037
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -45,7 +46,6 @@ config MACH_MX31LITE
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -53,17 +53,43 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX31LILLY
+	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+	select ARCH_MX31
+	help
+	  Include support for mx31 based LILLY1131 modules. This includes
+	  specific configurations for the board and its peripherals.
+
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.
 
+config MACH_PCM043
+	bool "Support Phytec pcm043 (i.MX35) platforms"
+	select ARCH_MX35
+	help
+	  Include support for Phytec pcm043 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+	bool "Support Atmark Armadillo-500 Development Base Board"
+	select ARCH_MX31
+	help
+	  Include support for Atmark Armadillo-500 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+	bool "Support MX35PDK platform"
+	select ARCH_MX35
+	default n
+	help
+	  Include support for MX35PDK platform. This includes specific
+	  configurations for the board and its peripherals.
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 272c8a953b3..0322696bd11 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -8,9 +8,13 @@ obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o
 obj-$(CONFIG_MACH_QONG)		+= qong.o
+obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
new file mode 100644
index 00000000000..541181090b3
--- /dev/null
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -0,0 +1,295 @@
+/*
+ * armadillo5x0.c
+ *
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * updates in http://alberdroid.blogspot.com/
+ *
+ * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
+ * Based on mx31ads.c and pcm037.c Great Work!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-armadillo5x0.h>
+#include <mach/mmc.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static int armadillo5x0_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* UART2 */
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	/* LAN9118_IRQ */
+	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+	{	/* 640x480 @ 60 Hz */
+		.name		= "CRT-VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 39721,
+		.left_margin	= 35,
+		.right_margin	= 115,
+		.upper_margin	= 43,
+		.lower_margin	= 1,
+		.hsync_len	= 10,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {/* 800x600 @ 56 Hz */
+		.name		= "CRT-SVGA",
+		.refresh	= 56,
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= 30000,
+		.left_margin	= 30,
+		.right_margin	= 108,
+		.upper_margin	= 13,
+		.lower_margin	= 10,
+		.hsync_len	= 10,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CRT-VGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+/*
+ * SDHC 1
+ * MMC support
+ */
+static int armadillo5x0_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static int armadillo5x0_sdhc1_init(struct device *dev,
+				   irq_handler_t detect_irq, void *data)
+{
+	int ret;
+	int gpio_det, gpio_wp;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
+
+	ret = gpio_request(gpio_det, "sdhc-card-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(gpio_det);
+
+	ret = gpio_request(gpio_wp, "sdhc-write-protect");
+	if (ret)
+		goto err_gpio_free;
+
+	gpio_direction_input(gpio_wp);
+
+	/* When supported the trigger type have to be BOTH */
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "sdhc-detect", data);
+
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(gpio_wp);
+
+err_gpio_free:
+	gpio_free(gpio_det);
+
+	return ret;
+
+}
+
+static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.get_ro = armadillo5x0_sdhc1_get_ro,
+	.init = armadillo5x0_sdhc1_init,
+	.exit = armadillo5x0_sdhc1_exit,
+};
+
+/*
+ * SMSC 9118
+ * Network support
+ */
+static struct resource armadillo5x0_smc911x_resources[] = {
+	{
+		.start	= CS3_BASE_ADDR,
+		.end	= CS3_BASE_ADDR + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device armadillo5x0_smc911x_device = {
+	.name           = "smsc911x",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(armadillo5x0_smc911x_resources),
+	.resource       = armadillo5x0_smc911x_resources,
+	.dev            = {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+/* UART device data */
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&armadillo5x0_smc911x_device,
+};
+
+/*
+ * Perform board specific initializations
+ */
+static void __init armadillo5x0_init(void)
+{
+	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
+			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* Register UART */
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	/* SMSC9118 IRQ pin */
+	gpio_direction_input(MX31_PIN_GPIO1_0);
+
+	/* Register SDHC */
+	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+
+	/* Register FB */
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init armadillo5x0_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer armadillo5x0_timer = {
+	.init	= armadillo5x0_timer_init,
+};
+
+MACHINE_START(ARMADILLO5X0, "Armadillo-500")
+	/* Maintainer: Alberto Panizzo  */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= mx31_map_io,
+	.init_irq	= mxc_init_irq,
+	.timer		= &armadillo5x0_timer,
+	.init_machine	= armadillo5x0_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 3c1e06f56dd..577ee83d1f6 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -147,34 +147,16 @@ static struct arm_ahb_div clk_consumer[] = {
 	{ .arm = 0, .ahb = 0, .sel = 0},
 };
 
-static struct arm_ahb_div clk_automotive[] = {
-	{ .arm = 1, .ahb = 3, .sel = 0},
-	{ .arm = 1, .ahb = 2, .sel = 1},
-	{ .arm = 2, .ahb = 1, .sel = 1},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 1, .ahb = 6, .sel = 0},
-	{ .arm = 1, .ahb = 4, .sel = 1},
-	{ .arm = 2, .ahb = 2, .sel = 1},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-};
-
 static unsigned long get_rate_arm(void)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	struct arm_ahb_div *aad;
 	unsigned long fref = get_rate_mpll();
 
-	if (pdr0 & 1) {
-		/* consumer path */
-		aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-		if (aad->sel)
-			fref = fref * 2 / 3;
-	} else {
-		/* auto path */
-		aad = &clk_automotive[(pdr0 >> 9) & 0x7];
-		if (aad->sel)
-			fref = fref * 3 / 4;
-	}
+	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+	if (aad->sel)
+		fref = fref * 2 / 3;
+
 	return fref / aad->arm;
 }
 
@@ -184,12 +166,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
 	struct arm_ahb_div *aad;
 	unsigned long fref = get_rate_mpll();
 
-	if (pdr0 & 1)
-		/* consumer path */
-		aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-	else
-		/* auto path */
-		aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 
 	return fref / aad->ahb;
 }
@@ -430,7 +407,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
 	_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
-	_REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
 	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
 	_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
 	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
@@ -462,8 +440,6 @@ int __init mx35_clocks_init()
 	int i;
 	unsigned int ll = 0;
 
-	mxc_set_cpu_type(MXC_CPU_MX35);
-
 #ifdef CONFIG_DEBUG_LL_CONSOLE
 	ll = (3 << 16);
 #endif
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index a68fcf981ed..8b14239724c 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -483,7 +483,7 @@ DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
 DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &ahb_clk);
+DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
 DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
@@ -566,13 +566,18 @@ int __init mx31_clocks_init(unsigned long fref)
 	u32 reg;
 	int i;
 
-	mxc_set_cpu_type(MXC_CPU_MX31);
-
 	ckih_rate = fref;
 
 	for (i = 0; i < ARRAY_SIZE(lookups); i++)
 		clkdev_add(&lookups[i]);
 
+	/* change the csi_clk parent if necessary */
+	reg = __raw_readl(MXC_CCM_CCMR);
+	if (!(reg & MXC_CCM_CCMR_CSCS))
+		if (clk_set_parent(&csi_clk, &usb_pll_clk))
+			pr_err("%s: error changing csi_clk parent\n", __func__);
+
+
 	/* Turn off all possible clocks */
 	__raw_writel((3 << 4), MXC_CCM_CGR0);
 	__raw_writel(0, MXC_CCM_CGR1);
@@ -581,6 +586,12 @@ int __init mx31_clocks_init(unsigned long fref)
 					   MX32, but still required to be set */
 		     MXC_CCM_CGR2);
 
+	/*
+	 * Before turning off usb_pll make sure ipg_per_clk is generated
+	 * by ipg_clk and not usb_pll.
+	 */
+	__raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
 	usb_pll_disable(&usb_pll_clk);
 
 	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 380be0c9b21..d927eddcad4 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -17,13 +17,17 @@
  * Boston, MA  02110-1301, USA.
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
+#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/common.h>
 #include <mach/imx-uart.h>
+#include <mach/mx3_camera.h>
 
 #include "devices.h"
 
@@ -283,6 +287,21 @@ struct platform_device mxcsdhc_device1 = {
 	.num_resources = ARRAY_SIZE(mxcsdhc1_resources),
 	.resource = mxcsdhc1_resources,
 };
+
+static struct resource rnga_resources[] = {
+	{
+		.start = RNGA_BASE_ADDR,
+		.end = RNGA_BASE_ADDR + 0x28,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_rnga_device = {
+	.name = "mxc_rnga",
+	.id = -1,
+	.num_resources = 1,
+	.resource = rnga_resources,
+};
 #endif /* CONFIG_ARCH_MX31 */
 
 /* i.MX31 Image Processing Unit */
@@ -329,10 +348,54 @@ struct platform_device mx3_fb = {
 	.num_resources	= ARRAY_SIZE(fb_resources),
 	.resource	= fb_resources,
 	.dev		= {
-		.coherent_dma_mask = 0xffffffff,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
        },
 };
 
+static struct resource camera_resources[] = {
+	{
+		.start	= IPU_CTRL_BASE_ADDR + 0x60,
+		.end	= IPU_CTRL_BASE_ADDR + 0x87,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mx3_camera = {
+	.name		= "mx3-camera",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(camera_resources),
+	.resource	= camera_resources,
+	.dev		= {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource otg_resources[] = {
+	{
+		.start	= OTG_BASE_ADDR,
+		.end	= OTG_BASE_ADDR + 0x1ff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_USB3,
+		.end	= MXC_INT_USB3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &otg_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= otg_resources,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
 	{
@@ -359,6 +422,7 @@ static int mx3_devices_init(void)
 	if (cpu_is_mx31()) {
 		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
 		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+		mxc_register_device(&mxc_rnga_device, NULL);
 	}
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 88c04b296fa..ffd494ddd4a 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -11,6 +11,10 @@ extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
+extern struct platform_device mx3_camera;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxcsdhc_device0;
 extern struct platform_device mxcsdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_rnga_device;
+
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 40ffc5a664d..c66ccbcdc11 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,7 +21,6 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
@@ -94,15 +93,13 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 EXPORT_SYMBOL(mxc_iomux_set_pad);
 
 /*
- * setups a single pin:
+ * allocs a single pin:
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
- * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
-	unsigned gpio;
 
 	if (pad >= (PIN_MAX + 1)) {
 		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
@@ -113,19 +110,13 @@ int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
 	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
 		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
 			pad, label ? label : "?");
-		return -EINVAL;
+		return -EBUSY;
 	}
 	mxc_iomux_mode(pin);
 
-	/* if we have a gpio, we can allocate it */
-	gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
-	if (gpio < (GPIO_PORT_MAX + 1) * 32)
-		if (gpio_request(gpio, label))
-			return -EINVAL;
-
 	return 0;
 }
-EXPORT_SYMBOL(mxc_iomux_setup_pin);
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
 
 int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
 		const char *label)
@@ -135,7 +126,8 @@ int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
 	int ret = -EINVAL;
 
 	for (i = 0; i < count; i++) {
-		if (mxc_iomux_setup_pin(*p, label))
+		ret = mxc_iomux_alloc_pin(*p, label);
+		if (ret)
 			goto setup_error;
 		p++;
 	}
@@ -150,14 +142,9 @@ EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
 void mxc_iomux_release_pin(const unsigned int pin)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
-	unsigned gpio;
 
 	if (pad < (PIN_MAX + 1))
 		clear_bit(pad, mxc_pin_alloc_map);
-
-	gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
-	if (gpio < (GPIO_PORT_MAX + 1) * 32)
-		gpio_free(gpio);
 }
 EXPORT_SYMBOL(mxc_iomux_release_pin);
 
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 9e1459cb4b7..1f5fdd456cb 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -72,8 +72,17 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
-void __init mxc_map_io(void)
+void __init mx31_map_io(void)
 {
+	mxc_set_cpu_type(MXC_CPU_MX31);
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx35_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index a6d6efefa6a..30e2767a78a 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -187,7 +187,7 @@ static void __init mx31ads_init_expio(void)
 	/*
 	 * Configure INT line as GPIO input
 	 */
-	mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
 
 	/* disable the interrupt and clear the status */
 	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
@@ -511,7 +511,7 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
  */
 static void __init mx31ads_map_io(void)
 {
-	mxc_map_io();
+	mx31_map_io();
 	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 }
 
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
new file mode 100644
index 00000000000..3b3a78f49c2
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -0,0 +1,216 @@
+/*
+ *  LILLY-1131 development board support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+#include <mach/mmc.h>
+#include <mach/mx3fb.h>
+#include <mach/ipu.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LILLY-1131 development board. If you design an own baseboard for the
+ * module, use this file as base for support code.
+ */
+
+static unsigned int lilly_db_board_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	MX31_PIN_CONTRAST__CONTRAST,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC support */
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int gpio_det, gpio_wp;
+
+static int mxc_mmc1_init(struct device *dev,
+			 irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
+
+	ret = gpio_request(gpio_det, "MMC detect");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(gpio_wp, "MMC w/p");
+	if (ret)
+		goto exit_free_det;
+
+	gpio_direction_input(gpio_det);
+	gpio_direction_input(gpio_wp);
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "MMC detect", data);
+	if (ret)
+		goto exit_free_wp;
+
+	return 0;
+
+exit_free_wp:
+	gpio_free(gpio_wp);
+
+exit_free_det:
+	gpio_free(gpio_det);
+
+	return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+	gpio_free(gpio_det);
+	gpio_free(gpio_wp);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+	.get_ro	= mxc_mmc1_get_ro,
+	.init	= mxc_mmc1_init,
+	.exit	= mxc_mmc1_exit,
+};
+
+/* Framebuffer support */
+static struct ipu_platform_data ipu_data __initdata = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static const struct fb_videomode fb_modedb = {
+	/* 640x480 TFT panel (IPS-056T) */
+	.name	   	= "CRT-VGA",
+	.refresh	= 64,
+	.xres		= 640,
+	.yres		= 480,
+	.pixclock	= 30000,
+	.left_margin	= 200,
+	.right_margin	= 2,
+	.upper_margin	= 2,
+	.lower_margin	= 2,
+	.hsync_len	= 3,
+	.vsync_len	= 1,
+	.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+	.vmode		= FB_VMODE_NONINTERLACED,
+	.flag		= 0,
+};
+
+static struct mx3fb_platform_data fb_pdata __initdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CRT-VGA",
+	.mode		= &fb_modedb,
+	.num_modes	= 1,
+};
+
+#define LCD_VCC_EN_GPIO	 (7)
+
+static void __init mx31lilly_init_fb(void)
+{
+	if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
+		printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
+		return;
+	}
+
+	mxc_register_device(&mx3_ipu, &ipu_data);
+	mxc_register_device(&mx3_fb, &fb_pdata);
+	gpio_direction_output(LCD_VCC_EN_GPIO, 1);
+}
+
+void __init mx31lilly_db_init(void)
+{
+	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
+					ARRAY_SIZE(lilly_db_board_pins),
+					"development board pins");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	mx31lilly_init_fb();
+}
+
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
new file mode 100644
index 00000000000..6ab2f163cb9
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -0,0 +1,155 @@
+/*
+ *  LILLY-1131 module support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+
+#include "devices.h"
+
+/*
+ * This file contains module-specific initialization routines for LILLY-1131.
+ * Initialization of peripherals found on the baseboard is implemented in the
+ * appropriate baseboard support code.
+ */
+
+/* SMSC ethernet support */
+
+static struct resource smsc91x_resources[] = {
+	{
+		.start	= CS4_BASE_ADDR,
+		.end	= CS4_BASE_ADDR + 0xffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+	}
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT |
+			  SMSC911X_SAVE_MAC_ADDRESS |
+			  SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc91x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc91x_resources),
+	.resource	= smsc91x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	}
+};
+
+/* NOR flash */
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&smsc91x_device,
+	&physmap_flash_device,
+	&mxc_i2c_device1,
+};
+
+static int mx31lilly_baseboard;
+core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
+
+static void __init mx31lilly_board_init(void)
+{
+	switch (mx31lilly_baseboard) {
+	case MX31LILLY_NOBOARD:
+		break;
+	case MX31LILLY_DB:
+		mx31lilly_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
+			mx31lilly_baseboard);
+	}
+
+	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx31lilly_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31lilly_timer = {
+	.init	= mx31lilly_timer_init,
+};
+
+MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mx31_map_io,
+	.init_irq	= mxc_init_irq,
+	.init_machine	= mx31lilly_board_init,
+	.timer		= &mx31lilly_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 894d98cd994..86fe70fa3e1 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -22,6 +22,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -32,11 +35,64 @@
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <mach/board-mx31lite.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
 
 /*
  * This file contains the board-specific initialization routines.
  */
 
+static unsigned int mx31lite_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* LAN9117 IRQ pin */
+	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= CS4_BASE_ADDR,
+		.end		= CS4_BASE_ADDR + 0x100,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
+		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
 /*
  * This structure defines the MX31 memory map.
  */
@@ -59,7 +115,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = {
  */
 void __init mx31lite_map_io(void)
 {
-	mxc_map_io();
+	mx31_map_io();
 	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
 }
 
@@ -68,6 +124,22 @@ void __init mx31lite_map_io(void)
  */
 static void __init mxc_board_init(void)
 {
+	int ret;
+
+	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
+				      "mx31lite");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+
+	/* SMSC9117 IRQ pin */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else {
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+		platform_device_register(&smsc911x_device);
+	}
 }
 
 static void __init mx31lite_timer_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index d080b4add79..4704405165a 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,33 +16,142 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int devboard_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+	/* SDHC2 */
+	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
+};
+
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int mxc_uart1_pins[] = {
-	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int devboard_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(SDHC2_WP);
+}
+
+static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC2_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC2_CD);
+
+	ret = gpio_request(SDHC2_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC2_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc2-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC2_WP);
+err_gpio_free:
+	gpio_free(SDHC2_CD);
+
+	return ret;
+}
+
+static void devboard_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC2_CD), data);
+	gpio_free(SDHC2_WP);
+	gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.get_ro	= devboard_sdhc2_get_ro,
+	.init	= devboard_sdhc2_init,
+	.exit	= devboard_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void devboard_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
 void __init mx31moboard_devboard_init(void)
 {
 	printk(KERN_INFO "Initializing mx31devboard peripherals\n");
-	mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+
+	mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
+		"devboard");
+
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	devboard_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 9ef9566823f..641c3d6153a 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,22 +16,144 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int marxbot_pins[] = {
+	/* SDHC2 */
+	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* CSI */
+	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+	MX31_PIN_TXD2__GPIO1_28,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
+};
+
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int marxbot_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(SDHC2_WP);
+}
+
+static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC2_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC2_CD);
+
+	ret = gpio_request(SDHC2_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC2_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc2-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC2_WP);
+err_gpio_free:
+	gpio_free(SDHC2_CD);
+
+	return ret;
+}
+
+static void marxbot_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC2_CD), data);
+	gpio_free(SDHC2_WP);
+	gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.get_ro	= marxbot_sdhc2_get_ro,
+	.init	= marxbot_sdhc2_init,
+	.exit	= marxbot_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void marxbot_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
 void __init mx31moboard_marxbot_init(void)
 {
 	printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+
+	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
+		"marxbot");
+
+	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	marxbot_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 34c2a1b99d4..a17f2e41160 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,26 +16,47 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
-#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/memory.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
-#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-mx31moboard.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int moboard_pins[] = {
+	/* UART0 */
+	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+	/* UART4 */
+	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+	/* I2C0 */
+	MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
+	/* I2C1 */
+	MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+};
+
 static struct physmap_flash_data mx31moboard_flash_data = {
 	.width  	= 2,
 };
@@ -60,17 +81,69 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct platform_device *devices[] __initdata = {
-	&mx31moboard_flash,
+static struct imxi2c_platform_data moboard_i2c0_pdata = {
+	.bitrate = 400000,
 };
 
-static int mxc_uart0_pins[] = {
-	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+static struct imxi2c_platform_data moboard_i2c1_pdata = {
+	.bitrate = 100000,
 };
-static int mxc_uart4_pins[] = {
-	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
-	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+
+#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
+#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
+
+static int moboard_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(SDHC1_WP);
+}
+
+static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC1_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC1_CD);
+
+	ret = gpio_request(SDHC1_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC1_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc1-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC1_WP);
+err_gpio_free:
+	gpio_free(SDHC1_CD);
+
+	return ret;
+}
+
+static void moboard_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC1_CD), data);
+	gpio_free(SDHC1_WP);
+	gpio_free(SDHC1_CD);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.get_ro	= moboard_sdhc1_get_ro,
+	.init	= moboard_sdhc1_init,
+	.exit	= moboard_sdhc1_exit,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mx31moboard_flash,
 };
 
 static int mx31moboard_baseboard;
@@ -81,14 +154,19 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
  */
 static void __init mxc_board_init(void)
 {
+	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
+		"moboard");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
 	mxc_register_device(&mxc_uart_device4, &uart_pdata);
 
+	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
+	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+
+	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
@@ -99,7 +177,8 @@ static void __init mxc_board_init(void)
 		mx31moboard_marxbot_init();
 		break;
 	default:
-		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
+			mx31moboard_baseboard);
 	}
 }
 
@@ -117,7 +196,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31moboard_timer,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index bc63f178569..c19838d2e36 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -20,6 +20,9 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -41,21 +44,192 @@
  * @ingroup System
  */
 
+static int mx31pdk_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+};
+
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int uart_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
+/*
+ * Support for the SMSC9217 on the Debug board.
+ */
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource smsc911x_resources[] = {
+	{
+		.start		= LAN9217_BASE_ADDR,
+		.end		= LAN9217_BASE_ADDR + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= EXPIO_INT_ENET,
+		.end		= EXPIO_INT_ENET,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
 };
 
-static inline void mxc_init_imx_uart(void)
+/*
+ * Routines for the CPLD on the debug board. It contains a CPLD handling
+ * LEDs, switches, interrupts for Ethernet.
+ */
+
+static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
 {
-	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	uint32_t imr_val;
+	uint32_t int_valid;
+	uint32_t expio_irq;
+
+	imr_val = __raw_readw(CPLD_INT_MASK_REG);
+	int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
+
+	expio_irq = MXC_EXP_IO_BASE;
+	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+		if ((int_valid & 1) == 0)
+			continue;
+		generic_handle_irq(expio_irq);
+	}
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq           an expio virtual irq number
+ */
+static void expio_mask_irq(uint32_t irq)
+{
+	uint16_t reg;
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* mask the interrupt */
+	reg = __raw_readw(CPLD_INT_MASK_REG);
+	reg |= 1 << expio;
+	__raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq           an expanded io virtual irq number
+ */
+static void expio_ack_irq(uint32_t irq)
+{
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* clear the interrupt status */
+	__raw_writew(1 << expio, CPLD_INT_RESET_REG);
+	__raw_writew(0, CPLD_INT_RESET_REG);
+	/* mask the interrupt */
+	expio_mask_irq(irq);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq           a expio virtual irq number
+ */
+static void expio_unmask_irq(uint32_t irq)
+{
+	uint16_t reg;
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* unmask the interrupt */
+	reg = __raw_readw(CPLD_INT_MASK_REG);
+	reg &= ~(1 << expio);
+	__raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+	.ack = expio_ack_irq,
+	.mask = expio_mask_irq,
+	.unmask = expio_unmask_irq,
+};
+
+static int __init mx31pdk_init_expio(void)
+{
+	int i;
+	int ret;
+
+	/* Check if there's a debug board connected */
+	if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
+	    (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
+	    (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
+		/* No Debug board found */
+		return -ENODEV;
+	}
+
+	pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+		__raw_readw(CPLD_CODE_VER_REG));
+
+	/*
+	 * Configure INT line as GPIO input
+	 */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+	/* Disable the interrupts and clear the status */
+	__raw_writew(0, CPLD_INT_MASK_REG);
+	__raw_writew(0xFFFF, CPLD_INT_RESET_REG);
+	__raw_writew(0, CPLD_INT_RESET_REG);
+	__raw_writew(0x1F, CPLD_INT_MASK_REG);
+	for (i = MXC_EXP_IO_BASE;
+	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+	     i++) {
+		set_irq_chip(i, &expio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+
+	return 0;
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31pdk_io_desc[] __initdata = {
+	{
+		.virtual = SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length = SPBA0_SIZE,
+		.type = MT_DEVICE_NONSHARED,
+	}, {
+		.virtual = CS5_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
+		.length = CS5_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init mx31pdk_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
 }
 
 /*!
@@ -63,7 +237,13 @@ static inline void mxc_init_imx_uart(void)
  */
 static void __init mxc_board_init(void)
 {
-	mxc_init_imx_uart();
+	mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
+				      "mx31pdk");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	if (!mx31pdk_init_expio())
+		platform_device_register(&smsc911x_device);
 }
 
 static void __init mx31pdk_timer_init(void)
@@ -84,7 +264,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31pdk_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31pdk_timer,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
new file mode 100644
index 00000000000..6d15374414b
--- /dev/null
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx35.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct pad_desc mx35pdk_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static void __init mx35pdk_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer mx35pdk_timer = {
+	.init	= mx35pdk_timer_init,
+};
+
+MACHINE_START(MX35_3DS, "Freescale MX35PDK")
+	/* Maintainer: Freescale Semiconductor, Inc */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx35pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index b5227d837b2..c6f61a1f06c 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -28,6 +28,10 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -37,7 +41,9 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
 #include <mach/board-pcm037.h>
+#include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
 #ifdef CONFIG_I2C_IMX
@@ -46,6 +52,76 @@
 
 #include "devices.h"
 
+static unsigned int pcm037_pins[] = {
+	/* I2C */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
+	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
+	/* SPI1 */
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* UART2 */
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	/* UART3 */
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+	/* LAN9217 irq pin */
+	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+	/* Onewire */
+	MX31_PIN_BATT_LINE__OWIRE,
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	MX31_PIN_D3_REV__D3_REV,
+	MX31_PIN_CONTRAST__CONTRAST,
+	MX31_PIN_D3_SPL__D3_SPL,
+	MX31_PIN_D3_CLS__D3_CLS,
+	MX31_PIN_LCS0__GPI03_23,
+};
+
 static struct physmap_flash_data pcm037_flash_data = {
 	.width  = 2,
 };
@@ -56,6 +132,54 @@ static struct resource pcm037_flash_resource = {
 	.flags	= IORESOURCE_MEM,
 };
 
+static int usbotg_pins[] = {
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+};
+
+/* USB OTG HS port */
+static int __init gpio_usbotg_hs_activate(void)
+{
+	int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
+					ARRAY_SIZE(usbotg_pins), "usbotg");
+
+	if (ret < 0) {
+		printk(KERN_ERR "Cannot set up OTG pins\n");
+		return ret;
+	}
+
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+	return 0;
+}
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 static struct platform_device pcm037_flash = {
 	.name	= "physmap-flash",
 	.id	= 0,
@@ -127,26 +251,8 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 };
 
 #ifdef CONFIG_I2C_IMX
-static int i2c_1_pins[] = {
-	MX31_PIN_CSPI2_MOSI__SCL,
-	MX31_PIN_CSPI2_MISO__SDA,
-};
-
-static int pcm037_i2c_1_init(struct device *dev)
-{
-	return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
-			"i2c-1");
-}
-
-static void pcm037_i2c_1_exit(struct device *dev)
-{
-	mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
-}
-
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
 	.bitrate = 100000,
-	.init = pcm037_i2c_1_init,
-	.exit = pcm037_i2c_1_exit,
 };
 
 static struct at24_platform_data board_eeprom = {
@@ -166,48 +272,119 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 };
 #endif
 
-static int sdhc1_pins[] = {
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-};
+/* Not connected by default */
+#ifdef PCM970_SDHC_RW_SWITCH
+static int pcm970_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+}
+#endif
+
+#define SDHC1_GPIO_WP	IOMUX_TO_GPIO(MX31_PIN_SFS6)
+#define SDHC1_GPIO_DET	IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
 {
-	return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
-				"sdhc-1");
+	int ret;
+
+	ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC1_GPIO_DET);
+
+#ifdef PCM970_SDHC_RW_SWITCH
+	ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC1_GPIO_WP);
+#endif
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+				"sdhc-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+#ifdef PCM970_SDHC_RW_SWITCH
+	gpio_free(SDHC1_GPIO_WP);
+err_gpio_free:
+#endif
+	gpio_free(SDHC1_GPIO_DET);
+
+	return ret;
 }
 
 static void pcm970_sdhc1_exit(struct device *dev, void *data)
 {
-	mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+	gpio_free(SDHC1_GPIO_DET);
+	gpio_free(SDHC1_GPIO_WP);
 }
 
-/* No card and rw detection at the moment */
 static struct imxmmc_platform_data sdhc_pdata = {
+#ifdef PCM970_SDHC_RW_SWITCH
+	.get_ro = pcm970_sdhc1_get_ro,
+#endif
 	.init = pcm970_sdhc1_init,
 	.exit = pcm970_sdhc1_exit,
 };
 
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
-	&pcm037_eth,
 	&pcm037_sram_device,
 };
 
-static int uart0_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static int uart2_pins[] = {
-	MX31_PIN_CSPI3_MOSI__RXD3,
-	MX31_PIN_CSPI3_MISO__TXD3
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 240x320 @ 60 Hz Sharp */
+		.name		= "Sharp-LQ035Q7DH06-QVGA",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+				  FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "TX090",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 7,
+		.lower_margin	= 40,
+		.hsync_len	= 96,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Sharp-LQ035Q7DH06-QVGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
 };
 
 /*
@@ -215,21 +392,28 @@ static int uart2_pins[] = {
  */
 static void __init mxc_board_init(void)
 {
+	int ret;
+
+	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
+			"pcm037");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata);
 
-	mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
 	/* LAN9217 IRQ pin */
-	if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
-				"pcm037-eth"))
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else {
 		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		platform_device_register(&pcm037_eth);
+	}
+
 
 #ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(1, pcm037_i2c_devices,
@@ -239,6 +423,10 @@ static void __init mxc_board_init(void)
 #endif
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	if (!gpio_usbotg_hs_activate())
+		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
 
 static void __init pcm037_timer_init(void)
@@ -255,7 +443,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
new file mode 100644
index 00000000000..8d27c324abf
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -0,0 +1,252 @@
+/*
+ *  Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 240x320 @ 60 Hz */
+		.name		= "Sharp-LQ035Q7",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "TX090",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 7,
+		.lower_margin	= 40,
+		.hsync_len	= 96,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Sharp-LQ035Q7",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data pcm043_flash_data = {
+	.width  = 2,
+};
+
+static struct resource pcm043_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device pcm043_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &pcm043_flash_data,
+	},
+	.resource = &pcm043_flash_resource,
+	.num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+static struct imxi2c_platform_data pcm043_i2c_1_data = {
+	.bitrate = 50000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm043_i2c_devices[] = {
+       {
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563",
+	}
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+	&pcm043_flash,
+	&mxc_fec_device,
+};
+
+static struct pad_desc pcm043_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* UART2 */
+	MX35_PAD_CTS2__UART2_CTS,
+	MX35_PAD_RTS2__UART2_RTS,
+	MX35_PAD_TXD2__UART2_TXD_MUX,
+	MX35_PAD_RXD2__UART2_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
+	/* Display */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+	MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+	i2c_register_board_info(0, pcm043_i2c_devices,
+			ARRAY_SIZE(pcm043_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+#endif
+
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init pcm043_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer pcm043_timer = {
+	.init	= pcm043_timer_init,
+};
+
+MACHINE_START(PCM043, "Phytec Phycore pcm043")
+	/* Maintainer: Pengutronix */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &pcm043_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 5a01e48fd8f..82b31c4ab11 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -279,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &qong_timer,
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 79df60c20e7..43da8bb4926 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -168,7 +168,7 @@ void __init netx_init_irq(void)
 {
 	int irq;
 
-	vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0);
+	vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0);
 
 	for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
 		set_irq_chip(irq, &netx_hif_chip);
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cd8de89c5fa..55ecc01ea20 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -46,7 +46,6 @@ config MACH_OMAP_H2
 config MACH_OMAP_H3
 	bool "TI H3 Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-#	select GPIOEXPANDER_OMAP
     	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 1bda8f5d754..6867cd3ad0b 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -13,6 +13,10 @@ obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
 
+# DSP
+obj-$(CONFIG_OMAP_MBOX_FWK)	+= mailbox_mach.o
+mailbox_mach-objs		:= mailbox.o
+
 led-y := leds.o
 
 # Specific board support
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index d1ed1365319..e70fc7c66bb 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -33,8 +33,11 @@
 #include <mach/common.h>
 #include <mach/dsp_common.h>
 #include <mach/omapfb.h>
+#include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
@@ -162,6 +165,15 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
 	},
 };
 
+static struct hwa742_platform_data nokia770_hwa742_platform_data = {
+	.te_connected		= 1,
+};
+
+static void hwa742_dev_init(void)
+{
+	clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
+	omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);
+}
 
 /* assume no Mini-AB port */
 
@@ -370,6 +382,7 @@ static void __init omap_nokia770_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	omap_dsp_init();
+	hwa742_dev_init();
 	ads7846_dev_init();
 	mipid_dev_init();
 	omap_usb_init(&nokia770_usb_config);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 336e51dc612..436eed22801 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -776,7 +776,7 @@ int __init omap1_clk_init(void)
 	arm_idlect1_mask = ~0;
 
 	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	cpu_mask = 0;
 	if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 9774c1f5311..5218943c91c 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -53,11 +53,12 @@
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <mach/tc.h>
-#include <mach/pm.h>
 #include <mach/mux.h>
 #include <mach/dma.h>
 #include <mach/dmtimer.h>
 
+#include "pm.h"
+
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
@@ -101,7 +102,7 @@ static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
  * going idle we continue to do idle even if we get
  * a clock tick interrupt . .
  */
-void omap_pm_idle(void)
+void omap1_pm_idle(void)
 {
 	extern __u32 arm_idlect1_mask;
 	__u32 use_idlect1 = arm_idlect1_mask;
@@ -222,7 +223,7 @@ static void omap_pm_wakeup_setup(void)
 #define EN_APICK	6	/* ARM_IDLECT2 */
 #define DSP_EN		1	/* ARM_RSTCT1 */
 
-void omap_pm_suspend(void)
+void omap1_pm_suspend(void)
 {
 	unsigned long arg0 = 0, arg1 = 0;
 
@@ -610,7 +611,7 @@ static int omap_pm_enter(suspend_state_t state)
 	{
 	case PM_SUSPEND_STANDBY:
 	case PM_SUSPEND_MEM:
-		omap_pm_suspend();
+		omap1_pm_suspend();
 		break;
 	default:
 		return -EINVAL;
@@ -683,7 +684,7 @@ static int __init omap_pm_init(void)
 		return -ENODEV;
 	}
 
-	pm_idle = omap_pm_idle;
+	pm_idle = omap1_pm_idle;
 
 	if (cpu_is_omap730())
 		setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/mach-omap1/pm.h
index ce6ee792753..9ed5e2c1de4 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -1,7 +1,7 @@
 /*
- * arch/arm/plat-omap/include/mach/pm.h
+ * arch/arm/mach-omap1/pm.h
  *
- * Header file for OMAP Power Management Routines
+ * Header file for OMAP1 Power Management Routines
  *
  * Author: MontaVista Software, Inc.
  *	   support@mvista.com
@@ -31,8 +31,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef __ASM_ARCH_OMAP_PM_H
-#define __ASM_ARCH_OMAP_PM_H
+#ifndef __ARCH_ARM_MACH_OMAP1_PM_H
+#define __ARCH_ARM_MACH_OMAP1_PM_H
 
 /*
  * ----------------------------------------------------------------------------
@@ -106,8 +106,7 @@
 
 #if     !defined(CONFIG_ARCH_OMAP730) && \
 	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX) && \
-	!defined(CONFIG_ARCH_OMAP24XX)
+	!defined(CONFIG_ARCH_OMAP16XX)
 #warning "Power management for this processor not implemented yet"
 #endif
 
@@ -115,29 +114,27 @@
 
 #include <linux/clk.h>
 
+extern struct kset power_subsys;
+
 extern void prevent_idle_sleep(void);
 extern void allow_idle_sleep(void);
 
-extern void omap_pm_idle(void);
-extern void omap_pm_suspend(void);
+extern void omap1_pm_idle(void);
+extern void omap1_pm_suspend(void);
+
 extern void omap730_cpu_suspend(unsigned short, unsigned short);
 extern void omap1510_cpu_suspend(unsigned short, unsigned short);
 extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
-					void __iomem *sdrc_power);
 extern void omap730_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
-extern void omap24xx_idle_loop_suspend(void);
 
 extern unsigned int omap730_cpu_suspend_sz;
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
 extern unsigned int omap730_idle_loop_suspend_sz;
 extern unsigned int omap1510_idle_loop_suspend_sz;
 extern unsigned int omap1610_idle_loop_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
 
 #ifdef CONFIG_OMAP_SERIAL_WAKE
 extern void omap_serial_wake_trigger(int enable);
@@ -170,10 +167,6 @@ extern void omap_serial_wake_trigger(int enable);
 #define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
 #define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
 
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
 /*
  * List of global OMAP registers to preserve.
  * More ones like CP and general purpose register values are preserved
@@ -283,63 +276,5 @@ enum mpui1610_save_state {
 #endif
 };
 
-enum omap24xx_save_state {
-	OMAP24XX_SLEEP_SAVE_START = 0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR1,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
-	OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO4_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
-	OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
-	OMAP24XX_SLEEP_SAVE_SIZE
-};
-
 #endif /* ASSEMBLER */
 #endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 842090b148f..f754cee4f3c 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -26,9 +26,6 @@
 #include <mach/mux.h>
 #include <mach/gpio.h>
 #include <mach/fpga.h>
-#ifdef CONFIG_PM
-#include <mach/pm.h>
-#endif
 
 static struct clk * uart1_ck;
 static struct clk * uart2_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index f3eac932092..22e8568339b 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -35,7 +35,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/pm.h>
+#include "pm.h"
 
 		.text
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 64ab386a65c..a755eb5e236 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,7 +25,7 @@ config ARCH_OMAP3430
 	select ARCH_OMAP_OTG
 
 comment "OMAP Board Type"
-	depends on ARCH_OMAP2 || ARCH_OMAP3
+	depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
@@ -56,6 +56,10 @@ config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_OMAP3EVM
+	bool "OMAP 3530 EVM board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
@@ -67,3 +71,11 @@ config MACH_OMAP_3430SDP
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_ZOOM2
+	bool "OMAP3 Zoom2 board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_4430SDP
+	bool "OMAP 4430 SDP board"
+	depends on ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index c49d9bfa3ab..735bae5b0de 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,12 +3,21 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
-		devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
-		clockdomain.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
+
+omap-2-3-common				= irq.o sdrc.o
+prcm-common				= prcm.o powerdomain.o
+clock-common				= clock.o clockdomain.o
+
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
+# SMP support ONLY available for OMAP4
+obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
+
 # Functions loaded to SRAM
 obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
@@ -20,14 +29,21 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 
 # Power Management
 ifeq ($(CONFIG_PM),y)
-obj-y					+= pm.o
+obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
+obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
 
+iommu-y					+= iommu2.o
+iommu-$(CONFIG_ARCH_OMAP3)		+= omap3-iommu.o
+
+obj-$(CONFIG_OMAP_IOMMU)		+= $(iommu-y)
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
@@ -40,6 +56,8 @@ obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
+					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
@@ -48,8 +66,17 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
+					   mmc-twl4030.o \
+					   board-zoom-debugboard.o
+
+obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
 # Platform specific device init code
-ifeq ($(CONFIG_USB_MUSB_SOC),y)
 obj-y					+= usb-musb.o
-endif
+
+onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
+obj-y					+= $(onenand-m) $(onenand-y)
+
+smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
+obj-y					+= $(smc91x-m) $(smc91x-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 22143651037..9c3fdcdf76c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -36,14 +36,12 @@
 #include <mach/common.h>
 #include <mach/gpmc.h>
 #include <mach/usb.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
 #define SDP2430_CS0_BASE	0x04000000
-#define	SDP2430_FLASH_CS	0
-#define	SDP2430_SMC91X_CS	5
-
-#define SDP2430_ETHR_GPIO_IRQ		149
+#define SECONDARY_LCD_GPIO		147
 
 static struct mtd_partition sdp2430_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -99,100 +97,53 @@ static struct platform_device sdp2430_flash_device = {
 	.resource	= &sdp2430_flash_resource,
 };
 
-static struct resource sdp2430_smc91x_resources[] = {
-	[0] = {
-		.start	= SDP2430_CS0_BASE,
-		.end	= SDP2430_CS0_BASE + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
-		.end	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device sdp2430_smc91x_device = {
-	.name		= "smc91x",
+static struct platform_device sdp2430_lcd_device = {
+	.name		= "sdp2430_lcd",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sdp2430_smc91x_resources),
-	.resource	= sdp2430_smc91x_resources,
 };
 
 static struct platform_device *sdp2430_devices[] __initdata = {
-	&sdp2430_smc91x_device,
 	&sdp2430_flash_device,
+	&sdp2430_lcd_device,
 };
 
-static inline void __init sdp2430_init_smc91x(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	unsigned int rate;
-	struct clk *gpmc_fck;
+static struct omap_lcd_config sdp2430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
 
-	eth_cs = SDP2430_SMC91X_CS;
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
 
-	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
-	if (IS_ERR(gpmc_fck)) {
-		WARN_ON(1);
-		return;
-	}
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 5,
+	.gpio_irq	= 149,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
 
-	clk_enable(gpmc_fck);
-	rate = clk_get_rate(gpmc_fck);
-
-	/* Make sure CS1 timings are correct, for 2430 always muxed */
-	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
-	if (rate >= 160000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else if (rate >= 130000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else { /* rate = 100000000 */
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
-	}
+};
 
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		goto out;
-	}
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
 
-	sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
-	sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	udelay(100);
+	gpmc_smc91x_init(&board_smc91x_data);
+}
 
-	if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			SDP2430_ETHR_GPIO_IRQ);
-		gpmc_cs_free(eth_cs);
-		goto out;
-	}
-	gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
+#else
 
-out:
-	clk_disable(gpmc_fck);
-	clk_put(gpmc_fck);
+static inline void board_smc91x_init(void)
+{
 }
 
+#endif
+
 static void __init omap_2430sdp_init_irq(void)
 {
 	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
-	sdp2430_init_smc91x();
 }
 
 static struct omap_uart_config sdp2430_uart_config __initdata = {
@@ -201,6 +152,7 @@ static struct omap_uart_config sdp2430_uart_config __initdata = {
 
 static struct omap_board_config_kernel sdp2430_config[] = {
 	{OMAP_TAG_UART, &sdp2430_uart_config},
+	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
 
@@ -248,6 +200,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 
 static void __init omap_2430sdp_init(void)
 {
+	int ret;
+
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
@@ -256,6 +210,12 @@ static void __init omap_2430sdp_init(void)
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	usb_musb_init();
+	board_smc91x_init();
+
+	/* Turn off secondary LCD backlight */
+	ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
+	if (ret == 0)
+		gpio_direction_output(SECONDARY_LCD_GPIO, 0);
 }
 
 static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ed927497212..496a90e4ea7 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -39,15 +39,13 @@
 
 #include <mach/control.h>
 #include <mach/keypad.h>
+#include <mach/gpmc-smc91x.h>
 
+#include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 
-#define SDP3430_ETHR_GPIO_IRQ_SDPV1	29
-#define SDP3430_ETHR_GPIO_IRQ_SDPV2	6
-#define SDP3430_SMC91X_CS		3
-
 #define SDP3430_TS_GPIO_IRQ_SDPV1	3
 #define SDP3430_TS_GPIO_IRQ_SDPV2	2
 
@@ -56,24 +54,6 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
-static struct resource sdp3430_smc91x_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device sdp3430_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sdp3430_smc91x_resources),
-	.resource	= sdp3430_smc91x_resources,
-};
-
 static int sdp3430_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -184,48 +164,14 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = {
 };
 
 static struct platform_device *sdp3430_devices[] __initdata = {
-	&sdp3430_smc91x_device,
 	&sdp3430_lcd_device,
 };
 
-static inline void __init sdp3430_init_smc91x(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	int eth_gpio = 0;
-
-	eth_cs = SDP3430_SMC91X_CS;
-
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
-	sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	udelay(100);
-
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
-	else
-		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
-
-	sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
-
-	if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			eth_gpio);
-		return;
-	}
-	gpio_direction_input(eth_gpio);
-}
-
 static void __init omap_3430sdp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
-	sdp3430_init_smc91x();
 }
 
 static struct omap_uart_config sdp3430_uart_config __initdata = {
@@ -506,6 +452,32 @@ static int __init omap3430_i2c_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 3,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
@@ -522,6 +494,7 @@ static void __init omap_3430sdp_init(void)
 	ads7846_dev_init();
 	omap_serial_init();
 	usb_musb_init();
+	board_smc91x_init();
 }
 
 static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
new file mode 100644
index 00000000000..57e477bd89c
--- /dev/null
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -0,0 +1,94 @@
+/*
+ * Board support file for OMAP4430 SDP.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/control.h>
+#include <mach/timer-gp.h>
+#include <asm/hardware/gic.h>
+
+static struct platform_device sdp4430_lcd_device = {
+	.name		= "sdp4430_lcd",
+	.id		= -1,
+};
+
+static struct platform_device *sdp4430_devices[] __initdata = {
+	&sdp4430_lcd_device,
+};
+
+static struct omap_uart_config sdp4430_uart_config __initdata = {
+	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2),
+};
+
+static struct omap_lcd_config sdp4430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel sdp4430_config[] __initdata = {
+	{ OMAP_TAG_UART,	&sdp4430_uart_config },
+	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
+};
+
+static void __init gic_init_irq(void)
+{
+	gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+}
+
+static void __init omap_4430sdp_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(1);
+#endif
+	gic_init_irq();
+	omap_gpio_init();
+}
+
+
+static void __init omap_4430sdp_init(void)
+{
+	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
+	omap_serial_init();
+}
+
+static void __init omap_4430sdp_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
+	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_4430sdp_map_io,
+	.init_irq	= omap_4430sdp_init_irq,
+	.init_machine	= omap_4430sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index da57b0fcda1..d8bc0a7dcb8 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,11 +16,13 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
@@ -39,6 +41,7 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
@@ -77,8 +80,163 @@ static struct platform_device ldp_smsc911x_device = {
 	},
 };
 
-static struct platform_device *ldp_devices[] __initdata = {
-	&ldp_smsc911x_device,
+static int ldp_twl4030_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(1, 0, KEY_2),
+	KEY(2, 0, KEY_3),
+	KEY(0, 1, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(2, 1, KEY_6),
+	KEY(3, 1, KEY_F5),
+	KEY(0, 2, KEY_7),
+	KEY(1, 2, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(3, 2, KEY_F6),
+	KEY(0, 3, KEY_F7),
+	KEY(1, 3, KEY_0),
+	KEY(2, 3, KEY_F8),
+	PERSISTENT_KEY(4, 5),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	0
+};
+
+static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+	.rows		= 6,
+	.cols		= 6,
+	.keymap		= ldp_twl4030_keymap,
+	.keymapsize	= ARRAY_SIZE(ldp_twl4030_keymap),
+	.rep		= 1,
+};
+
+static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
+	[0] = {
+		.code			= KEY_ENTER,
+		.gpio			= 101,
+		.desc			= "enter sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[1] = {
+		.code			= KEY_F1,
+		.gpio			= 102,
+		.desc			= "func 1",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[2] = {
+		.code			= KEY_F2,
+		.gpio			= 103,
+		.desc			= "func 2",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[3] = {
+		.code			= KEY_F3,
+		.gpio			= 104,
+		.desc			= "func 3",
+		.active_low		= 1,
+		.debounce_interval 	= 30,
+	},
+	[4] = {
+		.code			= KEY_F4,
+		.gpio			= 105,
+		.desc			= "func 4",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[5] = {
+		.code			= KEY_LEFT,
+		.gpio			= 106,
+		.desc			= "left sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[6] = {
+		.code			= KEY_RIGHT,
+		.gpio			= 107,
+		.desc			= "right sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[7] = {
+		.code			= KEY_UP,
+		.gpio			= 108,
+		.desc			= "up sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[8] = {
+		.code			= KEY_DOWN,
+		.gpio			= 109,
+		.desc			= "down sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+};
+
+static struct gpio_keys_platform_data ldp_gpio_keys = {
+	.buttons		= ldp_gpio_keys_buttons,
+	.nbuttons		= ARRAY_SIZE(ldp_gpio_keys_buttons),
+	.rep			= 1,
+};
+
+static struct platform_device ldp_gpio_keys_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ldp_gpio_keys,
+	},
+};
+
+static int ts_gpio;
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ts_gpio, "ads7846 irq") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ts_gpio);
+	omap_set_gpio_debounce(ts_gpio, 1);
+	omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info ldp_spi_board_info[] __initdata = {
+	[0] = {
+		/*
+		 * TSC2046 operates at a max freqency of 2MHz, so
+		 * operate slightly below at 1.5MHz
+		 */
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &tsc2046_mcspi_config,
+		.irq			= 0,
+		.platform_data		= &tsc2046_config,
+	},
 };
 
 static inline void __init ldp_init_smsc911x(void)
@@ -122,8 +280,22 @@ static struct omap_uart_config ldp_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct platform_device ldp_lcd_device = {
+	.name		= "ldp_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config ldp_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_UART,	&ldp_uart_config },
+	{ OMAP_TAG_LCD,		&ldp_lcd_config },
+};
+
+static struct twl4030_usb_data ldp_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
@@ -132,12 +304,39 @@ static struct twl4030_gpio_platform_data ldp_gpio_data = {
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
+static struct twl4030_madc_platform_data ldp_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &ldp_vmmc1_supply,
+};
+
 static struct twl4030_platform_data ldp_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.madc		= &ldp_madc_data,
+	.usb		= &ldp_usb_data,
+	.vmmc1		= &ldp_vmmc1,
 	.gpio		= &ldp_gpio_data,
+	.keypad		= &ldp_kp_twl4030_data,
 };
 
 static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
@@ -168,15 +367,29 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
+static struct platform_device *ldp_devices[] __initdata = {
+	&ldp_smsc911x_device,
+	&ldp_lcd_device,
+	&ldp_gpio_keys_device,
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	omap_board_config = ldp_config;
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	ts_gpio = 54;
+	ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+	spi_register_board_info(ldp_spi_board_info,
+				ARRAY_SIZE(ldp_spi_board_info));
+	ads7846_dev_init();
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
 	usb_musb_init();
+
+	twl4030_mmc_init(mmc);
+	/* link regulators to MMC adapters */
+	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
 static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3a7a29d1f9a..991ac9c3803 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
 
 #include <mach/hardware.h>
@@ -105,6 +106,8 @@ static struct platform_device omap3beagle_nand_device = {
 	.resource	= &omap3beagle_nand_resource,
 };
 
+#include "sdram-micron-mt46h32m32lf-6.h"
+
 static struct omap_uart_config omap3_beagle_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -118,6 +121,23 @@ static struct twl4030_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
+static struct platform_device omap3_beagle_lcd_device = {
+	.name		= "omap3beagle_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct regulator_consumer_supply beagle_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply beagle_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
 static struct gpio_led gpio_leds[];
 
 static int beagle_twl_gpio_setup(struct device *dev,
@@ -128,6 +148,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
+	/* link regulators to MMC adapters */
+	beagle_vmmc1_supply.dev = mmc[0].dev;
+	beagle_vsim_supply.dev = mmc[0].dev;
+
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
@@ -156,12 +180,85 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
 	.setup		= beagle_twl_gpio_setup,
 };
 
+static struct regulator_consumer_supply beagle_vdac_supply = {
+	.supply		= "vdac",
+	.dev		= &omap3_beagle_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply beagle_vdvi_supply = {
+	.supply		= "vdvi",
+	.dev		= &omap3_beagle_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data beagle_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data beagle_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data beagle_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data beagle_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vdvi_supply,
+};
+
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
 	.gpio		= &beagle_gpio_data,
+	.vmmc1		= &beagle_vmmc1,
+	.vsim		= &beagle_vsim,
+	.vdac		= &beagle_vdac,
+	.vpll2		= &beagle_vpll2,
 };
 
 static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
@@ -185,7 +282,7 @@ static int __init omap3_beagle_i2c_init(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -193,15 +290,6 @@ static void __init omap3_beagle_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct platform_device omap3_beagle_lcd_device = {
-	.name		= "omap3beagle_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "beagleboard::usr0",
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
new file mode 100644
index 00000000000..d3cc145814d
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -0,0 +1,329 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/keypad.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define OMAP3_EVM_TS_GPIO	175
+
+#define OMAP3EVM_ETHR_START	0x2c000000
+#define OMAP3EVM_ETHR_SIZE	1024
+#define OMAP3EVM_ETHR_GPIO_IRQ	176
+#define OMAP3EVM_SMC911X_CS	5
+
+static struct resource omap3evm_smc911x_resources[] = {
+	[0] =	{
+		.start	= OMAP3EVM_ETHR_START,
+		.end	= (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] =	{
+		.start	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+		.end	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device omap3evm_smc911x_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap3evm_smc911x_resources),
+	.resource	= &omap3evm_smc911x_resources[0],
+};
+
+static inline void __init omap3evm_init_smc911x(void)
+{
+	int eth_cs;
+	struct clk *l3ck;
+	unsigned int rate;
+
+	eth_cs = OMAP3EVM_SMC911X_CS;
+
+	l3ck = clk_get(NULL, "l3_ck");
+	if (IS_ERR(l3ck))
+		rate = 100000000;
+	else
+		rate = clk_get_rate(l3ck);
+
+	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+			OMAP3EVM_ETHR_GPIO_IRQ);
+		return;
+	}
+
+	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+}
+
+static struct omap_uart_config omap3_evm_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= 63,
+	},
+	{}	/* Terminator */
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "omap3evm::ledb",
+		/* normally not visible (board underside) */
+		.default_trigger	= "default-on",
+		.gpio			= -EINVAL,	/* gets replaced */
+		.active_low		= true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+
+static int omap3evm_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	omap_cfg_reg(L8_34XX_GPIO63);
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/*
+	 * Most GPIOs are for USB OTG.  Some are mostly sent to
+	 * the P2 connector; notably LEDA for the LCD backlight.
+	 */
+
+	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+	platform_device_register(&leds_gpio);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.setup		= omap3evm_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3evm_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int omap3evm_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_A),
+	KEY(0, 3, KEY_B),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_E),
+	KEY(1, 3, KEY_F),
+	KEY(2, 0, KEY_ENTER),
+	KEY(2, 1, KEY_I),
+	KEY(2, 2, KEY_J),
+	KEY(2, 3, KEY_K),
+	KEY(3, 0, KEY_M),
+	KEY(3, 1, KEY_N),
+	KEY(3, 2, KEY_O),
+	KEY(3, 3, KEY_P)
+};
+
+static struct twl4030_keypad_data omap3evm_kp_data = {
+	.rows		= 4,
+	.cols		= 4,
+	.keymap		= omap3evm_keymap,
+	.keymapsize	= ARRAY_SIZE(omap3evm_keymap),
+	.rep		= 1,
+};
+
+static struct twl4030_madc_platform_data omap3evm_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct twl4030_platform_data omap3evm_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.keypad		= &omap3evm_kp_data,
+	.madc		= &omap3evm_madc_data,
+	.usb		= &omap3evm_usb_data,
+	.gpio		= &omap3evm_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &omap3evm_twldata,
+	},
+};
+
+static int __init omap3_evm_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+			ARRAY_SIZE(omap3evm_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct platform_device omap3_evm_lcd_device = {
+	.name		= "omap3evm_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+	gpio_direction_input(OMAP3_EVM_TS_GPIO);
+
+	omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
+	omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
+struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+	.settle_delay_usecs	= 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3evm_spi_board_info[] = {
+	[0] = {
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
+		.platform_data		= &ads7846_config,
+	},
+};
+
+static void __init omap3_evm_init_irq(void)
+{
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+	omap3evm_init_smc911x();
+}
+
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+	{ OMAP_TAG_UART,	&omap3_evm_uart_config },
+	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
+};
+
+static struct platform_device *omap3_evm_devices[] __initdata = {
+	&omap3_evm_lcd_device,
+	&omap3evm_smc911x_device,
+};
+
+static void __init omap3_evm_init(void)
+{
+	omap3_evm_i2c_init();
+
+	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
+	omap_board_config = omap3_evm_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+
+	spi_register_board_info(omap3evm_spi_board_info,
+				ARRAY_SIZE(omap3evm_spi_board_info));
+
+	omap_serial_init();
+	usb_musb_init();
+	ads7846_dev_init();
+}
+
+static void __init omap3_evm_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3EVM, "OMAP3 EVM")
+	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_evm_map_io,
+	.init_irq	= omap3_evm_init_irq,
+	.init_machine	= omap3_evm_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 402f09c6cf1..e32aa23ce96 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -23,7 +23,11 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,11 +39,154 @@
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OMAP3_PANDORA_TS_GPIO		94
 
+/* hardware debounce: (value + 1) * 31us */
+#define GPIO_DEBOUNCE_TIME		127
+
+static struct gpio_led pandora_gpio_leds[] = {
+	{
+		.name			= "pandora::sd1",
+		.default_trigger	= "mmc0",
+		.gpio			= 128,
+	}, {
+		.name			= "pandora::sd2",
+		.default_trigger	= "mmc1",
+		.gpio			= 129,
+	}, {
+		.name			= "pandora::bluetooth",
+		.gpio			= 158,
+	}, {
+		.name			= "pandora::wifi",
+		.gpio			= 159,
+	},
+};
+
+static struct gpio_led_platform_data pandora_gpio_led_data = {
+	.leds		= pandora_gpio_leds,
+	.num_leds	= ARRAY_SIZE(pandora_gpio_leds),
+};
+
+static struct platform_device pandora_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pandora_gpio_led_data,
+	},
+};
+
+#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr)	\
+{								\
+	.gpio		= gpio_num,				\
+	.type		= ev_type,				\
+	.code		= ev_code,				\
+	.active_low	= act_low,				\
+	.desc		= "btn " descr,				\
+}
+
+#define GPIO_BUTTON_LOW(gpio_num, event_code, description)	\
+	GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
+
+static struct gpio_keys_button pandora_gpio_keys[] = {
+	GPIO_BUTTON_LOW(110,	KEY_UP,		"up"),
+	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
+	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
+	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
+	GPIO_BUTTON_LOW(111,	BTN_A,		"a"),
+	GPIO_BUTTON_LOW(106,	BTN_B,		"b"),
+	GPIO_BUTTON_LOW(109,	BTN_X,		"x"),
+	GPIO_BUTTON_LOW(101,	BTN_Y,		"y"),
+	GPIO_BUTTON_LOW(102,	BTN_TL,		"l"),
+	GPIO_BUTTON_LOW(97,	BTN_TL2,	"l2"),
+	GPIO_BUTTON_LOW(105,	BTN_TR,		"r"),
+	GPIO_BUTTON_LOW(107,	BTN_TR2,	"r2"),
+	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
+	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
+	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
+	GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
+	GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
+};
+
+static struct gpio_keys_platform_data pandora_gpio_key_info = {
+	.buttons	= pandora_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pandora_gpio_keys),
+};
+
+static struct platform_device pandora_keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pandora_gpio_key_info,
+	},
+};
+
+static void __init pandora_keys_gpio_init(void)
+{
+	/* set debounce time for GPIO banks 4 and 6 */
+	omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
+	omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+}
+
+static int pandora_keypad_map[] = {
+	/* col, row, code */
+	KEY(0, 0, KEY_9),
+	KEY(0, 1, KEY_0),
+	KEY(0, 2, KEY_BACKSPACE),
+	KEY(0, 3, KEY_O),
+	KEY(0, 4, KEY_P),
+	KEY(0, 5, KEY_K),
+	KEY(0, 6, KEY_L),
+	KEY(0, 7, KEY_ENTER),
+	KEY(1, 0, KEY_8),
+	KEY(1, 1, KEY_7),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_5),
+	KEY(1, 4, KEY_4),
+	KEY(1, 5, KEY_3),
+	KEY(1, 6, KEY_2),
+	KEY(1, 7, KEY_1),
+	KEY(2, 0, KEY_I),
+	KEY(2, 1, KEY_U),
+	KEY(2, 2, KEY_Y),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_R),
+	KEY(2, 5, KEY_E),
+	KEY(2, 6, KEY_W),
+	KEY(2, 7, KEY_Q),
+	KEY(3, 0, KEY_J),
+	KEY(3, 1, KEY_H),
+	KEY(3, 2, KEY_G),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_D),
+	KEY(3, 5, KEY_S),
+	KEY(3, 6, KEY_A),
+	KEY(3, 7, KEY_LEFTSHIFT),
+	KEY(4, 0, KEY_N),
+	KEY(4, 1, KEY_B),
+	KEY(4, 2, KEY_V),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_X),
+	KEY(4, 5, KEY_Z),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 7, KEY_COMMA),
+	KEY(5, 0, KEY_M),
+	KEY(5, 1, KEY_SPACE),
+	KEY(5, 2, KEY_FN),
+};
+
+static struct twl4030_keypad_data pandora_kp_data = {
+	.rows		= 8,
+	.cols		= 6,
+	.keymap		= pandora_keypad_map,
+	.keymapsize	= ARRAY_SIZE(pandora_keypad_map),
+	.rep		= 1,
+};
+
 static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 	{
 		.mmc		= 1,
@@ -69,6 +216,14 @@ static struct omap_uart_config omap3pandora_uart_config __initdata = {
 	.enabled_uarts	= (1 << 2), /* UART3 */
 };
 
+static struct regulator_consumer_supply pandora_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply pandora_vmmc2_supply = {
+	.supply			= "vmmc",
+};
+
 static int omap3pandora_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -77,6 +232,10 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
 	twl4030_mmc_init(omap3pandora_mmc);
 
+	/* link regulators to MMC adapters */
+	pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
+	pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
+
 	return 0;
 }
 
@@ -87,6 +246,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data pandora_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
+static struct regulator_init_data pandora_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vmmc2_supply,
+};
+
 static struct twl4030_usb_data omap3pandora_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -96,6 +285,9 @@ static struct twl4030_platform_data omap3pandora_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &omap3pandora_gpio_data,
 	.usb		= &omap3pandora_usb_data,
+	.vmmc1		= &pandora_vmmc1,
+	.vmmc2		= &pandora_vmmc2,
+	.keypad		= &pandora_kp_data,
 };
 
 static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
@@ -118,7 +310,7 @@ static int __init omap3pandora_i2c_init(void)
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -188,6 +380,8 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
 
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&omap3pandora_lcd_device,
+	&pandora_leds_gpio,
+	&pandora_keys_gpio,
 };
 
 static void __init omap3pandora_init(void)
@@ -201,6 +395,7 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
+	pandora_keys_gpio_init();
 	usb_musb_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b1f23bea863..dff5528fbfb 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -45,6 +46,7 @@
 #include <mach/nand.h>
 #include <mach/usb.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OVERO_GPIO_BT_XGATE	15
@@ -271,21 +273,76 @@ static struct omap_uart_config overo_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.transceiver	= true,
+		.ocr_mask	= 0x00100000,	/* 3.3V */
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply overo_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static int overo_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	twl4030_mmc_init(mmc);
+
+	overo_vmmc1_supply.dev = mmc[0].dev;
+
+	return 0;
+}
+
 static struct twl4030_gpio_platform_data overo_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= overo_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data overo_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct regulator_init_data overo_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &overo_vmmc1_supply,
 };
 
+/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+
 static struct twl4030_platform_data overo_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &overo_gpio_data,
+	.usb		= &overo_usb_data,
+	.vmmc1		= &overo_vmmc1,
 };
 
 static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
 	{
-		I2C_BOARD_INFO("twl4030", 0x48),
+		I2C_BOARD_INFO("tps65950", 0x48),
 		.flags = I2C_CLIENT_WAKE,
 		.irq = INT_34XX_SYS_NIRQ,
 		.platform_data = &overo_twldata,
@@ -303,7 +360,7 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -326,23 +383,6 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.transceiver	= true,
-	},
-	{}	/* Terminator */
-};
-
 static void __init overo_init(void)
 {
 	overo_i2c_init();
@@ -350,7 +390,6 @@ static void __init overo_init(void)
 	omap_board_config = overo_config;
 	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
 	overo_flash_init();
 	usb_musb_init();
 	overo_ads7846_init();
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index a7381729645..da93b86234e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -27,30 +27,13 @@
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/keypad.h>
+#include <mach/onenand.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
-
-#define SMC91X_CS			1
-#define SMC91X_GPIO_IRQ			54
-#define SMC91X_GPIO_RESET		164
-#define SMC91X_GPIO_PWRDWN		86
-
-static struct resource rx51_smc91x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device rx51_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rx51_smc91x_resources),
-	.resource	= rx51_smc91x_resources,
-};
+#define SYSTEM_REV_B_USES_VAUX3	0x1699
+#define SYSTEM_REV_S_USES_VAUX3 0x8
 
 static int rx51_keymap[] = {
 	KEY(0, 0, KEY_Q),
@@ -107,98 +90,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
 	.rep		= 1,
 };
 
-static struct platform_device *rx51_peripherals_devices[] = {
-	&rx51_smc91x_device,
-};
-
-/*
- * Timings are taken from smsc-lan91c96-ms.pdf
- */
-static int smc91x_init_gpmc(int cs)
-{
-	struct gpmc_timings t;
-	const int t2_r = 45;		/* t2 in Figure 12.10 */
-	const int t2_w = 30;		/* t2 in Figure 12.11 */
-	const int t3 = 15;		/* t3 in Figure 12.10 */
-	const int t5_r = 0;		/* t5 in Figure 12.10 */
-	const int t6_r = 45;		/* t6 in Figure 12.10 */
-	const int t6_w = 0;		/* t6 in Figure 12.11 */
-	const int t7_w = 15;		/* t7 in Figure 12.11 */
-	const int t15 = 12;		/* t15 in Figure 12.2 */
-	const int t20 = 185;		/* t20 in Figure 12.2 */
-
-	memset(&t, 0, sizeof(t));
-
-	t.cs_on = t15;
-	t.cs_rd_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.cs_wr_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
-	t.adv_on = t3;			/* Figure 12.10 */
-	t.adv_rd_off = t3 + t2_r;	/* Figure 12.10 */
-	t.adv_wr_off = t3 + t2_w;	/* Figure 12.11 */
-	t.oe_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.oe_on = t.oe_off - t6_r;	/* Figure 12.10 */
-	t.we_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
-	t.we_on = t.we_off - t7_w;	/* Figure 12.11 */
-	t.rd_cycle = t20;		/* Figure 12.2 */
-	t.wr_cycle = t20;		/* Figure 12.4 */
-	t.access = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.wr_access = t3 + t2_w + t6_w;	/* Figure 12.11 */
-
-	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
-
-	return gpmc_cs_set_timings(cs, &t);
-}
-
-static void __init rx51_init_smc91x(void)
-{
-	unsigned long cs_mem_base;
-	int ret;
-
-	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
-	omap_cfg_reg(G25_34XX_GPIO86_OUT);
-	omap_cfg_reg(H19_34XX_GPIO164_OUT);
-
-	if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
-	rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
-
-	smc91x_init_gpmc(SMC91X_CS);
-
-	if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
-		goto free1;
-
-	gpio_direction_input(SMC91X_GPIO_IRQ);
-	rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
-
-	ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
-	if (ret)
-		goto free2;
-	gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
-
-	ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
-	if (ret)
-		goto free3;
-	gpio_direction_output(SMC91X_GPIO_RESET, 0);
-	gpio_set_value(SMC91X_GPIO_RESET, 1);
-	msleep(100);
-	gpio_set_value(SMC91X_GPIO_RESET, 0);
-
-	return;
-
-free3:
-	gpio_free(SMC91X_GPIO_PWRDWN);
-free2:
-	gpio_free(SMC91X_GPIO_IRQ);
-free1:
-	gpmc_cs_free(SMC91X_CS);
-
-	printk(KERN_ERR "Could not initialize smc91x\n");
-}
-
 static struct twl4030_madc_platform_data rx51_madc_data = {
 	.irq_line		= 1,
 };
@@ -259,7 +150,7 @@ static struct regulator_init_data rx51_vaux2 = {
 };
 
 /* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3 = {
+static struct regulator_init_data rx51_vaux3_cam = {
 	.constraints = {
 		.name			= "VCAM_DIG_18",
 		.min_uV			= 1800000,
@@ -272,6 +163,22 @@ static struct regulator_init_data rx51_vaux3 = {
 	},
 };
 
+static struct regulator_init_data rx51_vaux3_mmc = {
+	.constraints = {
+		.name			= "VMMC2_30",
+		.min_uV			= 2800000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &rx51_vmmc2_supply,
+};
+
 static struct regulator_init_data rx51_vaux4 = {
 	.constraints = {
 		.name			= "VCAM_ANA_28",
@@ -382,10 +289,8 @@ static struct twl4030_platform_data rx51_twldata = {
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
-	.vaux3			= &rx51_vaux3,
 	.vaux4			= &rx51_vaux4,
 	.vmmc1			= &rx51_vmmc1,
-	.vmmc2			= &rx51_vmmc2,
 	.vsim			= &rx51_vsim,
 	.vdac			= &rx51_vdac,
 };
@@ -401,6 +306,13 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 
 static int __init rx51_i2c_init(void)
 {
+	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
+	    system_rev >= SYSTEM_REV_B_USES_VAUX3)
+		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
+	else {
+		rx51_twldata.vaux3 = &rx51_vaux3_cam;
+		rx51_twldata.vmmc2 = &rx51_vmmc2;
+	}
 	omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
 			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
 	omap_register_i2c_bus(2, 100, NULL, 0);
@@ -408,12 +320,94 @@ static int __init rx51_i2c_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+	{
+		.name           = "bootloader",
+		.offset         = 0,
+		.size           = 0x20000,
+		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
+	},
+	{
+		.name           = "config",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x60000,
+	},
+	{
+		.name           = "log",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x40000,
+	},
+	{
+		.name           = "kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "initfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+	.cs		= 0,
+	.gpio_irq	= 65,
+	.parts		= onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+};
+
+static void __init board_onenand_init(void)
+{
+	gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 1,
+	.gpio_irq	= 54,
+	.gpio_pwrdwn	= 86,
+	.gpio_reset	= 164,
+	.flags		= GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+	omap_cfg_reg(G25_34XX_GPIO86_OUT);
+	omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
 
 void __init rx51_peripherals_init(void)
 {
-	platform_add_devices(rx51_peripherals_devices,
-				ARRAY_SIZE(rx51_peripherals_devices));
 	rx51_i2c_init();
-	rx51_init_smc91x();
+	board_onenand_init();
+	board_smc91x_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
new file mode 100644
index 00000000000..bac5c4321ff
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+
+#include <mach/gpmc.h>
+
+#define ZOOM2_SMSC911X_CS	7
+#define ZOOM2_SMSC911X_GPIO	158
+#define ZOOM2_QUADUART_CS	3
+#define ZOOM2_QUADUART_GPIO	102
+#define QUART_CLK		1843200
+#define DEBUG_BASE		0x08000000
+#define ZOOM2_ETHR_START	DEBUG_BASE
+
+static struct resource zoom2_smsc911x_resources[] = {
+	[0] = {
+		.start	= ZOOM2_ETHR_START,
+		.end	= ZOOM2_ETHR_START + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config zoom2_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device zoom2_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(zoom2_smsc911x_resources),
+	.resource	= zoom2_smsc911x_resources,
+	.dev		= {
+		.platform_data = &zoom2_smsc911x_config,
+	},
+};
+
+static inline void __init zoom2_init_smsc911x(void)
+{
+	int eth_cs;
+	unsigned long cs_mem_base;
+	int eth_gpio = 0;
+
+	eth_cs = ZOOM2_SMSC911X_CS;
+
+	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
+		return;
+	}
+
+	zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	zoom2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+
+	eth_gpio = ZOOM2_SMSC911X_GPIO;
+
+	zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+
+	if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
+				eth_gpio);
+		return;
+	}
+	gpio_direction_input(eth_gpio);
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase	= 0x10000000,
+		.irq		= OMAP_GPIO_IRQ(102),
+		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= QUART_CLK,
+	}, {
+		.flags		= 0
+	}
+};
+
+static struct platform_device zoom2_debugboard_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM1,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static inline void __init zoom2_init_quaduart(void)
+{
+	int quart_cs;
+	unsigned long cs_mem_base;
+	int quart_gpio = 0;
+
+	quart_cs = ZOOM2_QUADUART_CS;
+
+	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem"
+				"for Quad UART(TL16CP754C)\n");
+		return;
+	}
+
+	quart_gpio = ZOOM2_QUADUART_GPIO;
+
+	if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
+								quart_gpio);
+		return;
+	}
+	gpio_direction_input(quart_gpio);
+}
+
+static inline int omap_zoom2_debugboard_detect(void)
+{
+	int debug_board_detect = 0;
+
+	debug_board_detect = ZOOM2_SMSC911X_GPIO;
+
+	if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+		"board detect\n", debug_board_detect);
+		return 0;
+	}
+	gpio_direction_input(debug_board_detect);
+
+	if (!gpio_get_value(debug_board_detect)) {
+		gpio_free(debug_board_detect);
+		return 0;
+	}
+	return 1;
+}
+
+static struct platform_device *zoom2_devices[] __initdata = {
+	&zoom2_smsc911x_device,
+	&zoom2_debugboard_serial_device,
+};
+
+int __init omap_zoom2_debugboard_init(void)
+{
+	if (!omap_zoom2_debugboard_detect())
+		return 0;
+
+	zoom2_init_smsc911x();
+	zoom2_init_quaduart();
+	return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+}
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
new file mode 100644
index 00000000000..bcc0f7632de
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * Modified from mach-omap2/board-ldp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/usb.h>
+
+#include "mmc-twl4030.h"
+
+static void __init omap_zoom2_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct omap_uart_config zoom2_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+	{ OMAP_TAG_UART,	&zoom2_uart_config },
+};
+
+static struct twl4030_gpio_platform_data zoom2_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data zoom2_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.gpio		= &zoom2_gpio_data,
+};
+
+static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &zoom2_twldata,
+	},
+};
+
+static int __init omap_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
+			ARRAY_SIZE(zoom2_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}	/* Terminator */
+};
+
+extern int __init omap_zoom2_debugboard_init(void);
+
+static void __init omap_zoom2_init(void)
+{
+	omap_i2c_init();
+	omap_board_config = zoom2_config;
+	omap_board_config_size = ARRAY_SIZE(zoom2_config);
+	omap_serial_init();
+	omap_zoom2_debugboard_init();
+	twl4030_mmc_init(mmc);
+	usb_musb_init();
+}
+
+static void __init omap_zoom2_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_zoom2_map_io,
+	.init_irq	= omap_zoom2_init_irq,
+	.init_machine	= omap_zoom2_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 4247a153441..ba528f85749 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -91,9 +91,9 @@ static void _omap2xxx_clk_commit(struct clk *clk)
 		return;
 
 	prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
-		OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+		OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
 	/* OCP barrier */
-	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
 }
 
 /*
@@ -547,8 +547,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	const struct clksel_rate *clkr;
 	u32 last_div = 0;
 
-	printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
-	       clk->name, target_rate);
+	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
+		 clk->name, target_rate);
 
 	*new_div = 1;
 
@@ -562,7 +562,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
 		/* Sanity check */
 		if (clkr->div <= last_div)
-			printk(KERN_ERR "clock: clksel_rate table not sorted "
+			pr_err("clock: clksel_rate table not sorted "
 			       "for clock %s", clk->name);
 
 		last_div = clkr->div;
@@ -574,7 +574,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	}
 
 	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find divisor for target "
+		pr_err("clock: Could not find divisor for target "
 		       "rate %ld for clock %s parent %s\n", target_rate,
 		       clk->name, clk->parent->name);
 		return ~0;
@@ -582,8 +582,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
 	*new_div = clkr->div;
 
-	printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
-	       (clk->parent->rate / clkr->div));
+	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
+		 (clk->parent->rate / clkr->div));
 
 	return (clk->parent->rate / clkr->div);
 }
@@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk)
 	if ((regval32 & (1 << clk->enable_bit)) == v)
 		return;
 
-	printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+	printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
 	if (cpu_is_omap34xx()) {
 		omap2_clk_enable(clk);
 		omap2_clk_disable(clk);
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index e4cef333e29..44de0271fc2 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -233,6 +233,8 @@ static struct prcm_config *curr_prcm_set;
 static struct clk *vclk;
 static struct clk *sclk;
 
+static void __iomem *prcm_clksrc_ctrl;
+
 /*-------------------------------------------------------------------------
  * Omap24xx specific clock functions
  *-------------------------------------------------------------------------*/
@@ -269,10 +271,9 @@ static int omap2_enable_osc_ck(struct clk *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	pcc = __raw_readl(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
-		      OMAP24XX_PRCM_CLKSRC_CTRL);
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 
 	return 0;
 }
@@ -281,10 +282,9 @@ static void omap2_disable_osc_ck(struct clk *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	pcc = __raw_readl(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
-		      OMAP24XX_PRCM_CLKSRC_CTRL);
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 }
 
 static const struct clkops clkops_oscck = {
@@ -654,7 +654,7 @@ static u32 omap2_get_sysclkdiv(void)
 {
 	u32 div;
 
-	div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	div = __raw_readl(prcm_clksrc_ctrl);
 	div &= OMAP_SYSCLKDIV_MASK;
 	div >>= OMAP_SYSCLKDIV_SHIFT;
 
@@ -714,15 +714,18 @@ int __init omap2_clk_init(void)
 	struct omap_clk *c;
 	u32 clkrate;
 
-	if (cpu_is_omap242x())
+	if (cpu_is_omap242x()) {
+		prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
 		cpu_mask = RATE_IN_242X;
-	else if (cpu_is_omap2430())
+	} else if (cpu_is_omap2430()) {
+		prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
 		cpu_mask = RATE_IN_243X;
+	}
 
 	clk_init(&omap2_clk_functions);
 
 	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
 	propagate_rate(&osc_ck);
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 88c5acb40fc..458f00cdcbe 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -24,6 +24,17 @@
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 
+/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP2420
+#define OMAP_CM_REGADDR			OMAP2420_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2420_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2420_PRCM_CLKEMUL_CTRL
+#else
+#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2430_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2430_PRCM_CLKEMUL_CTRL
+#endif
+
 static unsigned long omap2_table_mpu_recalc(struct clk *clk);
 static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
 static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index ba05aa42bd8..9e43fe5209d 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -129,6 +129,9 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
 	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
 	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
+	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
+	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
+	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_343X),
 	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
 	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
 	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
@@ -281,6 +284,8 @@ static struct omap_clk omap34xx_clks[] = {
 
 #define MAX_DPLL_WAIT_TRIES		1000000
 
+#define MIN_SDRC_DLL_LOCK_FREQ		83000000
+
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
  * @clk: DPLL struct clk
@@ -703,6 +708,7 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
 static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 {
 	u32 new_div = 0;
+	u32 unlock_dll = 0;
 	unsigned long validrate, sdrcrate;
 	struct omap_sdrc_params *sp;
 
@@ -729,17 +735,22 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	if (!sp)
 		return -EINVAL;
 
-	pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
-		validrate);
-	pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
-		sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
+		pr_debug("clock: will unlock SDRC DLL\n");
+		unlock_dll = 1;
+	}
+
+	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+		 validrate);
+	pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
+		 sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
 
 	/* REVISIT: SRAM code doesn't support other M2 divisors yet */
 	WARN_ON(new_div != 1 && new_div != 2);
 
 	/* REVISIT: Add SDRC_MR changing to this code also */
 	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
-				  sp->actim_ctrlb, new_div);
+				  sp->actim_ctrlb, new_div, unlock_dll);
 
 	return 0;
 }
@@ -956,7 +967,7 @@ int __init omap2_clk_init(void)
 	clk_init(&omap2_clk_functions);
 
 	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
 		if (c->cpu & cpu_clkflg) {
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 017a30e9aa1..e433aec4efd 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -27,6 +27,8 @@
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 
+#define OMAP_CM_REGADDR		OMAP34XX_CM_REGADDR
+
 static unsigned long omap3_dpll_recalc(struct clk *clk);
 static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
 static void omap3_dpll_allow_idle(struct clk *clk);
@@ -1228,6 +1230,37 @@ static struct clk d2d_26m_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk modem_fck = {
+	.name		= "modem_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clk_clkdm,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sad2d_ick = {
+	.name		= "sad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mad2d_ick = {
+	.name		= "mad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430_EN_MAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 static const struct clksel omap343x_gpt_clksel[] = {
 	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
 	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
@@ -1945,8 +1978,6 @@ static struct clk usb_l4_ick = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */
-
 /* SECURITY_L4_ICK2 based clocks */
 
 static struct clk security_l4_ick2 = {
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index 281d5da1918..fe319ae4ca0 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -195,7 +195,7 @@ static struct clockdomain sgx_clkdm = {
 static struct clockdomain d2d_clkdm = {
 	.name		= "d2d_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 6f3f5a36aae..6923deb98a2 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -145,6 +145,8 @@
 #define OMAP3430_CLKACTIVITY_MPU_MASK			(1 << 0)
 
 /* CM_FCLKEN1_CORE specific bits */
+#define OMAP3430_EN_MODEM				(1 << 31)
+#define OMAP3430_EN_MODEM_SHIFT				31
 
 /* CM_ICLKEN1_CORE specific bits */
 #define OMAP3430_EN_ICR					(1 << 29)
@@ -161,6 +163,8 @@
 #define OMAP3430_EN_MAILBOXES_SHIFT			7
 #define OMAP3430_EN_OMAPCTRL				(1 << 6)
 #define OMAP3430_EN_OMAPCTRL_SHIFT			6
+#define OMAP3430_EN_SAD2D				(1 << 3)
+#define OMAP3430_EN_SAD2D_SHIFT				3
 #define OMAP3430_EN_SDRC				(1 << 1)
 #define OMAP3430_EN_SDRC_SHIFT				1
 
@@ -176,6 +180,10 @@
 #define OMAP3430_EN_DES1				(1 << 0)
 #define OMAP3430_EN_DES1_SHIFT				0
 
+/* CM_ICLKEN3_CORE */
+#define OMAP3430_EN_MAD2D_SHIFT				3
+#define OMAP3430_EN_MAD2D				(1 << 3)
+
 /* CM_FCLKEN3_CORE specific bits */
 #define OMAP3430ES2_EN_TS_SHIFT				1
 #define OMAP3430ES2_EN_TS_MASK				(1 << 1)
@@ -231,6 +239,8 @@
 #define OMAP3430ES2_ST_CPEFUSE_MASK			(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
+#define OMAP3430_AUTO_MODEM				(1 << 31)
+#define OMAP3430_AUTO_MODEM_SHIFT			31
 #define OMAP3430ES2_AUTO_MMC3				(1 << 30)
 #define OMAP3430ES2_AUTO_MMC3_SHIFT			30
 #define OMAP3430ES2_AUTO_ICR				(1 << 29)
@@ -287,6 +297,8 @@
 #define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
 #define OMAP3430ES1_AUTO_D2D				(1 << 3)
 #define OMAP3430ES1_AUTO_D2D_SHIFT			3
+#define OMAP3430_AUTO_SAD2D				(1 << 3)
+#define OMAP3430_AUTO_SAD2D_SHIFT			3
 #define OMAP3430_AUTO_SSI				(1 << 0)
 #define OMAP3430_AUTO_SSI_SHIFT				0
 
@@ -308,6 +320,8 @@
 #define	OMAP3430ES2_AUTO_USBTLL				(1 << 2)
 #define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
 #define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
+#define OMAP3430_AUTO_MAD2D_SHIFT			3
+#define OMAP3430_AUTO_MAD2D				(1 << 3)
 
 /* CM_CLKSEL_CORE */
 #define OMAP3430_CLKSEL_SSI_SHIFT			8
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 65fdf78c91e..1d3c93bf86d 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -16,17 +16,12 @@
 
 #include "prcm-common.h"
 
-#ifndef __ASSEMBLER__
-#define OMAP_CM_REGADDR(module, reg)					\
-			IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
-#else
 #define OMAP2420_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-#endif
 
 /*
  * Architecture-specific global CM registers
@@ -38,6 +33,7 @@
 #define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
 #define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
 
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
 #define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
 
 /*
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
new file mode 100644
index 00000000000..2fd22f9c5f0
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -0,0 +1,330 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-onenand.c
+ *
+ * Copyright (C) 2006 - 2009 Nokia Corporation
+ * Contacts:	Juha Yrjola
+ *		Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <mach/onenand.h>
+#include <mach/board.h>
+#include <mach/gpmc.h>
+
+static struct omap_onenand_platform_data *gpmc_onenand_data;
+
+static struct platform_device gpmc_onenand_device = {
+	.name		= "omap2-onenand",
+	.id		= -1,
+};
+
+static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+{
+	struct gpmc_timings t;
+
+	const int t_cer = 15;
+	const int t_avdp = 12;
+	const int t_aavdh = 7;
+	const int t_ce = 76;
+	const int t_aa = 76;
+	const int t_oe = 20;
+	const int t_cez = 20; /* max of t_cez, t_oez */
+	const int t_ds = 30;
+	const int t_wpl = 40;
+	const int t_wph = 30;
+
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = 0;
+	t.cs_on = 0;
+	t.adv_on = 0;
+
+	/* Read */
+	t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer));
+	t.oe_on  = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh);
+	t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa);
+	t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce));
+	t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe));
+	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+	t.cs_rd_off = t.oe_off;
+	t.rd_cycle  = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez);
+
+	/* Write */
+	t.adv_wr_off = t.adv_rd_off;
+	t.we_on  = t.oe_on;
+	if (cpu_is_omap34xx()) {
+		t.wr_data_mux_bus = t.we_on;
+		t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+	}
+	t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+	t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+	t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+
+	/* Configure GPMC for asynchronous read */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+			  GPMC_CONFIG1_DEVICESIZE_16 |
+			  GPMC_CONFIG1_MUXADDDATA);
+
+	return gpmc_cs_set_timings(cs, &t);
+}
+
+static void set_onenand_cfg(void __iomem *onenand_base, int latency,
+				int sync_read, int sync_write, int hf)
+{
+	u32 reg;
+
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
+	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
+		ONENAND_SYS_CFG1_BL_16;
+	if (sync_read)
+		reg |= ONENAND_SYS_CFG1_SYNC_READ;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
+	if (sync_write)
+		reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	if (hf)
+		reg |= ONENAND_SYS_CFG1_HF;
+	else
+		reg &= ~ONENAND_SYS_CFG1_HF;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+}
+
+static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+					void __iomem *onenand_base,
+					int freq)
+{
+	struct gpmc_timings t;
+	const int t_cer  = 15;
+	const int t_avdp = 12;
+	const int t_cez  = 20; /* max of t_cez, t_oez */
+	const int t_ds   = 30;
+	const int t_wpl  = 40;
+	const int t_wph  = 30;
+	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
+	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+	int first_time = 0, hf = 0, sync_read = 0, sync_write = 0;
+	int err, ticks_cez;
+	int cs = cfg->cs;
+	u32 reg;
+
+	if (cfg->flags & ONENAND_SYNC_READ) {
+		sync_read = 1;
+	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+		sync_read = 1;
+		sync_write = 1;
+	}
+
+	if (!freq) {
+		/* Very first call freq is not known */
+		err = omap2_onenand_set_async_mode(cs, onenand_base);
+		if (err)
+			return err;
+		reg = readw(onenand_base + ONENAND_REG_VERSION_ID);
+		switch ((reg >> 4) & 0xf) {
+		case 0:
+			freq = 40;
+			break;
+		case 1:
+			freq = 54;
+			break;
+		case 2:
+			freq = 66;
+			break;
+		case 3:
+			freq = 83;
+			break;
+		case 4:
+			freq = 104;
+			break;
+		default:
+			freq = 54;
+			break;
+		}
+		first_time = 1;
+	}
+
+	switch (freq) {
+	case 83:
+		min_gpmc_clk_period = 12; /* 83 MHz */
+		t_ces   = 5;
+		t_avds  = 4;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 9;
+		break;
+	case 66:
+		min_gpmc_clk_period = 15; /* 66 MHz */
+		t_ces   = 6;
+		t_avds  = 5;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 11;
+		break;
+	default:
+		min_gpmc_clk_period = 18; /* 54 MHz */
+		t_ces   = 7;
+		t_avds  = 7;
+		t_avdh  = 7;
+		t_ach   = 9;
+		t_aavdh = 7;
+		t_rdyo  = 15;
+		sync_write = 0;
+		break;
+	}
+
+	tick_ns = gpmc_ticks_to_ns(1);
+	div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+	gpmc_clk_ns = gpmc_ticks_to_ns(div);
+	if (gpmc_clk_ns < 15) /* >66Mhz */
+		hf = 1;
+	if (hf)
+		latency = 6;
+	else if (gpmc_clk_ns >= 25) /* 40 MHz*/
+		latency = 3;
+	else
+		latency = 4;
+
+	if (first_time)
+		set_onenand_cfg(onenand_base, latency,
+					sync_read, sync_write, hf);
+
+	if (div == 1) {
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+		reg |= (1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+		reg |= (1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+		reg |= (1 << 7);
+		reg |= (1 << 23);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+	} else {
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+		reg &= ~(1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+		reg &= ~(1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+		reg &= ~(1 << 7);
+		reg &= ~(1 << 23);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+	}
+
+	/* Set synchronous read timings */
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = min_gpmc_clk_period;
+	t.cs_on = 0;
+	t.adv_on = 0;
+	fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds));
+	fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns);
+	t.page_burst_access = gpmc_clk_ns;
+
+	/* Read */
+	t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
+	t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
+	t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
+	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+	t.cs_rd_off = t.oe_off;
+	ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div;
+	t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div +
+		     ticks_cez);
+
+	/* Write */
+	if (sync_write) {
+		t.adv_wr_off = t.adv_rd_off;
+		t.we_on  = 0;
+		t.we_off = t.cs_rd_off;
+		t.cs_wr_off = t.cs_rd_off;
+		t.wr_cycle  = t.rd_cycle;
+		if (cpu_is_omap34xx()) {
+			t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset +
+					gpmc_ns_to_ticks(min_gpmc_clk_period +
+					t_rdyo));
+			t.wr_access = t.access;
+		}
+	} else {
+		t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int,
+							t_avdp, t_cer));
+		t.we_on  = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh);
+		t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+		t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+		t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+		if (cpu_is_omap34xx()) {
+			t.wr_data_mux_bus = t.we_on;
+			t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+		}
+	}
+
+	/* Configure GPMC for synchronous read */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+			  GPMC_CONFIG1_WRAPBURST_SUPP |
+			  GPMC_CONFIG1_READMULTIPLE_SUPP |
+			  (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
+			  (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
+			  (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
+			  GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) |
+			  GPMC_CONFIG1_PAGE_LEN(2) |
+			  (cpu_is_omap34xx() ? 0 :
+				(GPMC_CONFIG1_WAIT_READ_MON |
+				 GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
+			  GPMC_CONFIG1_DEVICESIZE_16 |
+			  GPMC_CONFIG1_DEVICETYPE_NOR |
+			  GPMC_CONFIG1_MUXADDDATA);
+
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
+
+	return 0;
+}
+
+static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
+{
+	struct device *dev = &gpmc_onenand_device.dev;
+
+	/* Set sync timings in GPMC */
+	if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
+			freq) < 0) {
+		dev_err(dev, "Unable to set synchronous mode\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+{
+	gpmc_onenand_data = _onenand_data;
+	gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
+	gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
+
+	if (cpu_is_omap24xx() &&
+			(gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
+		printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+		gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
+		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+	}
+
+	if (platform_device_register(&gpmc_onenand_device) < 0) {
+		printk(KERN_ERR "Unable to register OneNAND device\n");
+		return;
+	}
+}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
new file mode 100644
index 00000000000..df99d31d8b6
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-smc91x.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Contact:	Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+
+#include <mach/board.h>
+#include <mach/gpmc.h>
+#include <mach/gpmc-smc91x.h>
+
+static struct omap_smc91x_platform_data *gpmc_cfg;
+
+static struct resource gpmc_smc91x_resources[] = {
+	[0] = {
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc91x_platdata gpmc_smc91x_info = {
+	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+};
+
+static struct platform_device gpmc_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
+	.resource	= gpmc_smc91x_resources,
+	.dev		= {
+		.platform_data = &gpmc_smc91x_info,
+	},
+};
+
+/*
+ * Set the gpmc timings for smc91c96. The timings are taken
+ * from the data sheet available at:
+ * http://www.smsc.com/main/catalog/lan91c96.html
+ * REVISIT: Level shifters can add at least to the access latency.
+ */
+static int smc91c96_gpmc_retime(void)
+{
+	struct gpmc_timings t;
+	const int t3 = 10;	/* Figure 12.2 read and 12.4 write */
+	const int t4_r = 20;	/* Figure 12.2 read */
+	const int t4_w = 5;	/* Figure 12.4 write */
+	const int t5 = 25;	/* Figure 12.2 read */
+	const int t6 = 15;	/* Figure 12.2 read */
+	const int t7 = 5;	/* Figure 12.4 write */
+	const int t8 = 5;	/* Figure 12.4 write */
+	const int t20 = 185;	/* Figure 12.2 read and 12.4 write */
+	u32 l;
+
+	memset(&t, 0, sizeof(t));
+
+	/* Read timings */
+	t.cs_on = 0;
+	t.adv_on = t.cs_on;
+	t.oe_on = t.adv_on + t3;
+	t.access = t.oe_on + t5;
+	t.oe_off = t.access;
+	t.adv_rd_off = t.oe_off + max(t4_r, t6);
+	t.cs_rd_off = t.oe_off;
+	t.rd_cycle = t20 - t.oe_on;
+
+	/* Write timings */
+	t.we_on = t.adv_on + t3;
+
+	if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
+		t.wr_data_mux_bus = t.we_on;
+		t.we_off = t.wr_data_mux_bus + t7;
+	} else
+		t.we_off = t.we_on + t7;
+	if (cpu_is_omap34xx())
+		t.wr_access = t.we_off;
+	t.adv_wr_off = t.we_off + max(t4_w, t8);
+	t.cs_wr_off = t.we_off + t4_w;
+	t.wr_cycle = t20 - t.we_on;
+
+	l = GPMC_CONFIG1_DEVICESIZE_16;
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		l |= GPMC_CONFIG1_MUXADDDATA;
+	if (gpmc_cfg->flags & GPMC_READ_MON)
+		l |= GPMC_CONFIG1_WAIT_READ_MON;
+	if (gpmc_cfg->flags & GPMC_WRITE_MON)
+		l |= GPMC_CONFIG1_WAIT_WRITE_MON;
+	if (gpmc_cfg->wait_pin)
+		l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
+	gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
+
+	/*
+	 * FIXME: Calculate the address and data bus muxed timings.
+	 * Note that at least adv_rd_off needs to be changed according
+	 * to omap3430 TRM Figure 11-11. Are the sdp boards using the
+	 * FPGA in between smc91x and omap as the timings are different
+	 * from above?
+	 */
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		return 0;
+
+	return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
+}
+
+/*
+ * Initialize smc91x device connected to the GPMC. Note that we
+ * assume that pin multiplexing is done in the board-*.c file,
+ * or in the bootloader.
+ */
+void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
+{
+	unsigned long cs_mem_base;
+	int ret;
+
+	gpmc_cfg = board_data;
+
+	if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
+		gpmc_cfg->retime = smc91c96_gpmc_retime;
+
+	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		return;
+	}
+
+	gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
+	gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
+	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+
+	if (gpmc_cfg->retime) {
+		ret = gpmc_cfg->retime();
+		if (ret != 0)
+			goto free1;
+	}
+
+	if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0)
+		goto free1;
+
+	gpio_direction_input(gpmc_cfg->gpio_irq);
+	gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
+
+	if (gpmc_cfg->gpio_pwrdwn) {
+		ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown");
+		if (ret)
+			goto free2;
+		gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0);
+	}
+
+	if (gpmc_cfg->gpio_reset) {
+		ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset");
+		if (ret)
+			goto free3;
+
+		gpio_direction_output(gpmc_cfg->gpio_reset, 0);
+		gpio_set_value(gpmc_cfg->gpio_reset, 1);
+		msleep(100);
+		gpio_set_value(gpmc_cfg->gpio_reset, 0);
+	}
+
+	if (platform_device_register(&gpmc_smc91x_device) < 0) {
+		printk(KERN_ERR "Unable to register smc91x device\n");
+		gpio_free(gpmc_cfg->gpio_reset);
+		goto free3;
+	}
+
+	return;
+
+free3:
+	if (gpmc_cfg->gpio_pwrdwn)
+		gpio_free(gpmc_cfg->gpio_pwrdwn);
+free2:
+	gpio_free(gpmc_cfg->gpio_irq);
+free1:
+	gpmc_cs_free(gpmc_cfg->cs);
+
+	printk(KERN_ERR "Could not initialize smc91x\n");
+}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2249049c1d5..f91934b2b09 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -5,6 +5,9 @@
  *
  * Author: Juha Yrjola
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -424,6 +427,9 @@ void __init gpmc_init(void)
 	} else if (cpu_is_omap34xx()) {
 		ck = "gpmc_fck";
 		l = OMAP34XX_GPMC_BASE;
+	} else if (cpu_is_omap44xx()) {
+		ck = "gpmc_fck";
+		l = OMAP44XX_GPMC_BASE;
 	}
 
 	gpmc_l3_clk = clk_get(NULL, ck);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 34b5914e0f8..458990e20c6 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -200,7 +203,10 @@ void __init omap2_check_revision(void)
 		omap24xx_check_revision();
 	else if (cpu_is_omap34xx())
 		omap34xx_check_revision();
-	else
+	else if (cpu_is_omap44xx()) {
+		printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+		return;
+	} else
 		pr_err("OMAP revision unknown, please fix!\n");
 
 	/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 916fcd3a232..32afd944821 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,12 +4,14 @@
  * OMAP2 I/O mapping code
  *
  * Copyright (C) 2005 Nokia Corporation
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2009 Texas Instruments
  *
  * Author:
  *	Juha Yrjola <juha.yrjola@nokia.com>
  *	Syed Khasim <x0khasim@ti.com>
  *
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -30,6 +32,7 @@
 #include <mach/sdrc.h>
 #include <mach/gpmc.h>
 
+#ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
 #include <mach/powerdomain.h>
@@ -38,7 +41,7 @@
 
 #include <mach/clockdomain.h>
 #include "clockdomains.h"
-
+#endif
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -166,6 +169,46 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 	},
 };
 #endif
+#ifdef	CONFIG_ARCH_OMAP4
+static struct map_desc omap44xx_io_desc[] __initdata = {
+	{
+		.virtual	= L3_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_44XX_PHYS),
+		.length		= L3_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_44XX_PHYS),
+		.length		= L4_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_WK_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_44XX_PHYS),
+		.length		= L4_WK_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= OMAP44XX_GPMC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_GPMC_PHYS),
+		.length		= OMAP44XX_GPMC_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER_44XX_PHYS),
+		.length		= L4_PER_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_EMU_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_EMU_44XX_PHYS),
+		.length		= L4_EMU_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+#endif
 
 void __init omap2_map_common_io(void)
 {
@@ -183,6 +226,9 @@ void __init omap2_map_common_io(void)
 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
 #endif
 
+#if defined(CONFIG_ARCH_OMAP4)
+	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+#endif
 	/* Normally devicemaps_init() would flush caches and tlb after
 	 * mdesc->map_io(), but we must also do it here because of the CPU
 	 * revision check below.
@@ -198,9 +244,11 @@ void __init omap2_map_common_io(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
 {
 	omap2_mux_init();
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
 	omap2_sdrc_init(sp);
+#endif
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
new file mode 100644
index 00000000000..015f22a53ea
--- /dev/null
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -0,0 +1,323 @@
+/*
+ * omap iommu: omap2/3 architecture specific functions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ *		Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+
+#include <mach/iommu.h>
+
+/*
+ * omap2 architecture specific register bit definitions
+ */
+#define IOMMU_ARCH_VERSION	0x00000011
+
+/* SYSCONF */
+#define MMU_SYS_IDLE_SHIFT	3
+#define MMU_SYS_IDLE_FORCE	(0 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_NONE	(1 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_SMART	(2 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_MASK	(3 << MMU_SYS_IDLE_SHIFT)
+
+#define MMU_SYS_SOFTRESET	(1 << 1)
+#define MMU_SYS_AUTOIDLE	1
+
+/* SYSSTATUS */
+#define MMU_SYS_RESETDONE	1
+
+/* IRQSTATUS & IRQENABLE */
+#define MMU_IRQ_MULTIHITFAULT	(1 << 4)
+#define MMU_IRQ_TABLEWALKFAULT	(1 << 3)
+#define MMU_IRQ_EMUMISS		(1 << 2)
+#define MMU_IRQ_TRANSLATIONFAULT	(1 << 1)
+#define MMU_IRQ_TLBMISS		(1 << 0)
+#define MMU_IRQ_MASK	\
+	(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \
+	 MMU_IRQ_TRANSLATIONFAULT)
+
+/* MMU_CNTL */
+#define MMU_CNTL_SHIFT		1
+#define MMU_CNTL_MASK		(7 << MMU_CNTL_SHIFT)
+#define MMU_CNTL_EML_TLB	(1 << 3)
+#define MMU_CNTL_TWL_EN		(1 << 2)
+#define MMU_CNTL_MMU_EN		(1 << 1)
+
+#define get_cam_va_mask(pgsz)				\
+	(((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 :	\
+	 ((pgsz) == MMU_CAM_PGSZ_1M)  ? 0xfff00000 :	\
+	 ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 :	\
+	 ((pgsz) == MMU_CAM_PGSZ_4K)  ? 0xfffff000 : 0)
+
+static int omap2_iommu_enable(struct iommu *obj)
+{
+	u32 l, pa;
+	unsigned long timeout;
+
+	if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd,  SZ_16K))
+		return -EINVAL;
+
+	pa = virt_to_phys(obj->iopgd);
+	if (!IS_ALIGNED(pa, SZ_16K))
+		return -EINVAL;
+
+	iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
+
+	timeout = jiffies + msecs_to_jiffies(20);
+	do {
+		l = iommu_read_reg(obj, MMU_SYSSTATUS);
+		if (l & MMU_SYS_RESETDONE)
+			break;
+	} while (time_after(jiffies, timeout));
+
+	if (!(l & MMU_SYS_RESETDONE)) {
+		dev_err(obj->dev, "can't take mmu out of reset\n");
+		return -ENODEV;
+	}
+
+	l = iommu_read_reg(obj, MMU_REVISION);
+	dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
+		 (l >> 4) & 0xf, l & 0xf);
+
+	l = iommu_read_reg(obj, MMU_SYSCONFIG);
+	l &= ~MMU_SYS_IDLE_MASK;
+	l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
+	iommu_write_reg(obj, l, MMU_SYSCONFIG);
+
+	iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE);
+	iommu_write_reg(obj, pa, MMU_TTB);
+
+	l = iommu_read_reg(obj, MMU_CNTL);
+	l &= ~MMU_CNTL_MASK;
+	l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
+	iommu_write_reg(obj, l, MMU_CNTL);
+
+	return 0;
+}
+
+static void omap2_iommu_disable(struct iommu *obj)
+{
+	u32 l = iommu_read_reg(obj, MMU_CNTL);
+
+	l &= ~MMU_CNTL_MASK;
+	iommu_write_reg(obj, l, MMU_CNTL);
+	iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
+
+	dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
+}
+
+static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
+{
+	int i;
+	u32 stat, da;
+	const char *err_msg[] =	{
+		"tlb miss",
+		"translation fault",
+		"emulation miss",
+		"table walk fault",
+		"multi hit fault",
+	};
+
+	stat = iommu_read_reg(obj, MMU_IRQSTATUS);
+	stat &= MMU_IRQ_MASK;
+	if (!stat)
+		return 0;
+
+	da = iommu_read_reg(obj, MMU_FAULT_AD);
+	*ra = da;
+
+	dev_err(obj->dev, "%s:\tda:%08x ", __func__, da);
+
+	for (i = 0; i < ARRAY_SIZE(err_msg); i++) {
+		if (stat & (1 << i))
+			printk("%s ", err_msg[i]);
+	}
+	printk("\n");
+
+	iommu_write_reg(obj, stat, MMU_IRQSTATUS);
+	return stat;
+}
+
+static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	cr->cam = iommu_read_reg(obj, MMU_READ_CAM);
+	cr->ram = iommu_read_reg(obj, MMU_READ_RAM);
+}
+
+static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM);
+	iommu_write_reg(obj, cr->ram, MMU_RAM);
+}
+
+static u32 omap2_cr_to_virt(struct cr_regs *cr)
+{
+	u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK;
+	u32 mask = get_cam_va_mask(cr->cam & page_size);
+
+	return cr->cam & mask;
+}
+
+static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e)
+{
+	struct cr_regs *cr;
+
+	if (e->da & ~(get_cam_va_mask(e->pgsz))) {
+		dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__,
+			e->da);
+		return ERR_PTR(-EINVAL);
+	}
+
+	cr = kmalloc(sizeof(*cr), GFP_KERNEL);
+	if (!cr)
+		return ERR_PTR(-ENOMEM);
+
+	cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz;
+	cr->ram = e->pa | e->endian | e->elsz | e->mixed;
+
+	return cr;
+}
+
+static inline int omap2_cr_valid(struct cr_regs *cr)
+{
+	return cr->cam & MMU_CAM_V;
+}
+
+static u32 omap2_get_pte_attr(struct iotlb_entry *e)
+{
+	u32 attr;
+
+	attr = e->mixed << 5;
+	attr |= e->endian;
+	attr |= e->elsz >> 3;
+	attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
+
+	return attr;
+}
+
+static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
+{
+	char *p = buf;
+
+	/* FIXME: Need more detail analysis of cam/ram */
+	p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram);
+
+	return p - buf;
+}
+
+#define pr_reg(name)							\
+	p += sprintf(p, "%20s: %08x\n",					\
+		     __stringify(name), iommu_read_reg(obj, MMU_##name));
+
+static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+	char *p = buf;
+
+	pr_reg(REVISION);
+	pr_reg(SYSCONFIG);
+	pr_reg(SYSSTATUS);
+	pr_reg(IRQSTATUS);
+	pr_reg(IRQENABLE);
+	pr_reg(WALKING_ST);
+	pr_reg(CNTL);
+	pr_reg(FAULT_AD);
+	pr_reg(TTB);
+	pr_reg(LOCK);
+	pr_reg(LD_TLB);
+	pr_reg(CAM);
+	pr_reg(RAM);
+	pr_reg(GFLUSH);
+	pr_reg(FLUSH_ENTRY);
+	pr_reg(READ_CAM);
+	pr_reg(READ_RAM);
+	pr_reg(EMU_FAULT_AD);
+
+	return p - buf;
+}
+
+static void omap2_iommu_save_ctx(struct iommu *obj)
+{
+	int i;
+	u32 *p = obj->ctx;
+
+	for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+		p[i] = iommu_read_reg(obj, i * sizeof(u32));
+		dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+	}
+
+	BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_iommu_restore_ctx(struct iommu *obj)
+{
+	int i;
+	u32 *p = obj->ctx;
+
+	for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+		iommu_write_reg(obj, p[i], i * sizeof(u32));
+		dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+	}
+
+	BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+	e->da		= cr->cam & MMU_CAM_VATAG_MASK;
+	e->pa		= cr->ram & MMU_RAM_PADDR_MASK;
+	e->valid	= cr->cam & MMU_CAM_V;
+	e->pgsz		= cr->cam & MMU_CAM_PGSZ_MASK;
+	e->endian	= cr->ram & MMU_RAM_ENDIAN_MASK;
+	e->elsz		= cr->ram & MMU_RAM_ELSZ_MASK;
+	e->mixed	= cr->ram & MMU_RAM_MIXED;
+}
+
+static const struct iommu_functions omap2_iommu_ops = {
+	.version	= IOMMU_ARCH_VERSION,
+
+	.enable		= omap2_iommu_enable,
+	.disable	= omap2_iommu_disable,
+	.fault_isr	= omap2_iommu_fault_isr,
+
+	.tlb_read_cr	= omap2_tlb_read_cr,
+	.tlb_load_cr	= omap2_tlb_load_cr,
+
+	.cr_to_e	= omap2_cr_to_e,
+	.cr_to_virt	= omap2_cr_to_virt,
+	.alloc_cr	= omap2_alloc_cr,
+	.cr_valid	= omap2_cr_valid,
+	.dump_cr	= omap2_dump_cr,
+
+	.get_pte_attr	= omap2_get_pte_attr,
+
+	.save_ctx	= omap2_iommu_save_ctx,
+	.restore_ctx	= omap2_iommu_restore_ctx,
+	.dump_ctx	= omap2_iommu_dump_ctx,
+};
+
+static int __init omap2_iommu_init(void)
+{
+	return install_iommu_arch(&omap2_iommu_ops);
+}
+module_init(omap2_iommu_init);
+
+static void __exit omap2_iommu_exit(void)
+{
+	uninstall_iommu_arch(&omap2_iommu_ops);
+}
+module_exit(omap2_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 998c5c45587..b82863887f1 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -28,7 +28,6 @@
 #define INTC_MIR_CLEAR0		0x0088
 #define INTC_MIR_SET0		0x008c
 #define INTC_PENDING_IRQ0	0x0098
-
 /* Number of IRQ state bits in each MIR register */
 #define IRQ_BITS_PER_REG	32
 
@@ -134,7 +133,6 @@ static struct irq_chip omap_irq_chip = {
 	.ack	= omap_mask_ack_irq,
 	.mask	= omap_mask_irq,
 	.unmask	= omap_unmask_irq,
-	.disable = omap_mask_irq,
 };
 
 static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
@@ -157,6 +155,22 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
 	intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
 }
 
+int omap_irq_pending(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+		struct omap_irq_bank *bank = irq_banks + i;
+		int irq;
+
+		for (irq = 0; irq < bank->nr_irqs; irq += 32)
+			if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 +
+					       ((irq >> 5) << 5)))
+				return 1;
+	}
+	return 0;
+}
+
 void __init omap_init_irq(void)
 {
 	unsigned long nr_of_irqs = 0;
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index dc40b3e7220..9756a878fd9 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -16,8 +16,8 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
 #include <mach/control.h>
@@ -26,31 +26,9 @@
 
 #include "mmc-twl4030.h"
 
-#if defined(CONFIG_TWL4030_CORE) && \
-	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
-#define LDO_CLR			0x00
-#define VSEL_S2_CLR		0x40
-
-#define VMMC1_DEV_GRP		0x27
-#define VMMC1_CLR		0x00
-#define VMMC1_315V		0x03
-#define VMMC1_300V		0x02
-#define VMMC1_285V		0x01
-#define VMMC1_185V		0x00
-#define VMMC1_DEDICATED		0x2A
-
-#define VMMC2_DEV_GRP		0x2B
-#define VMMC2_CLR		0x40
-#define VMMC2_315V		0x0c
-#define VMMC2_300V		0x0b
-#define VMMC2_285V		0x0a
-#define VMMC2_280V		0x09
-#define VMMC2_260V		0x08
-#define VMMC2_185V		0x06
-#define VMMC2_DEDICATED		0x2E
-
-#define VMMC_DEV_GRP_P1		0x20
+#if defined(CONFIG_REGULATOR) && \
+	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
 static u16 control_pbias_offset;
 static u16 control_devconf1_offset;
@@ -59,19 +37,16 @@ static u16 control_devconf1_offset;
 
 static struct twl_mmc_controller {
 	struct omap_mmc_platform_data	*mmc;
-	u8		twl_vmmc_dev_grp;
-	u8		twl_mmc_dedicated;
-	char		name[HSMMC_NAME_LEN + 1];
-} hsmmc[OMAP34XX_NR_MMC] = {
-	{
-		.twl_vmmc_dev_grp		= VMMC1_DEV_GRP,
-		.twl_mmc_dedicated		= VMMC1_DEDICATED,
-	},
-	{
-		.twl_vmmc_dev_grp		= VMMC2_DEV_GRP,
-		.twl_mmc_dedicated		= VMMC2_DEDICATED,
-	},
-};
+	/* Vcc == configured supply
+	 * Vcc_alt == optional
+	 *   -	MMC1, supply for DAT4..DAT7
+	 *   -	MMC2/MMC2, external level shifter voltage supply, for
+	 *	chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
+	 */
+	struct regulator		*vcc;
+	struct regulator		*vcc_aux;
+	char				name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
 
 static int twl_mmc_card_detect(int irq)
 {
@@ -117,16 +92,60 @@ static int twl_mmc_late_init(struct device *dev)
 	int ret = 0;
 	int i;
 
-	ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
-	if (ret)
-		goto done;
-	ret = gpio_direction_input(mmc->slots[0].switch_pin);
-	if (ret)
-		goto err;
+	/* MMC/SD/SDIO doesn't require a card detect switch */
+	if (gpio_is_valid(mmc->slots[0].switch_pin)) {
+		ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
+		if (ret)
+			goto done;
+		ret = gpio_direction_input(mmc->slots[0].switch_pin);
+		if (ret)
+			goto err;
+	}
 
+	/* require at least main regulator */
 	for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
 		if (hsmmc[i].name == mmc->slots[0].name) {
+			struct regulator *reg;
+
 			hsmmc[i].mmc = mmc;
+
+			reg = regulator_get(dev, "vmmc");
+			if (IS_ERR(reg)) {
+				dev_dbg(dev, "vmmc regulator missing\n");
+				/* HACK: until fixed.c regulator is usable,
+				 * we don't require a main regulator
+				 * for MMC2 or MMC3
+				 */
+				if (i != 0)
+					break;
+				ret = PTR_ERR(reg);
+				goto err;
+			}
+			hsmmc[i].vcc = reg;
+			mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
+
+			/* allow an aux regulator */
+			reg = regulator_get(dev, "vmmc_aux");
+			hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
+
+			/* UGLY HACK:  workaround regulator framework bugs.
+			 * When the bootloader leaves a supply active, it's
+			 * initialized with zero usecount ... and we can't
+			 * disable it without first enabling it.  Until the
+			 * framework is fixed, we need a workaround like this
+			 * (which is safe for MMC, but not in general).
+			 */
+			if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
+				regulator_enable(hsmmc[i].vcc);
+				regulator_disable(hsmmc[i].vcc);
+			}
+			if (hsmmc[i].vcc_aux) {
+				if (regulator_is_enabled(reg) > 0) {
+					regulator_enable(reg);
+					regulator_disable(reg);
+				}
+			}
+
 			break;
 		}
 	}
@@ -173,96 +192,6 @@ static int twl_mmc_resume(struct device *dev, int slot)
 #define twl_mmc_resume	NULL
 #endif
 
-/*
- * Sets the MMC voltage in twl4030
- */
-
-#define MMC1_OCR	(MMC_VDD_165_195 \
-		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-#define MMC2_OCR	(MMC_VDD_165_195 \
-		|MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
-		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-
-static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
-{
-	int ret;
-	u8 vmmc = 0, dev_grp_val;
-
-	if (!vdd)
-		goto doit;
-
-	if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
-		/* VMMC1:  max 220 mA.  And for 8-bit mode,
-		 * VSIM:  max 50 mA
-		 */
-		switch (1 << vdd) {
-		case MMC_VDD_165_195:
-			vmmc = VMMC1_185V;
-			/* and VSIM_180V */
-			break;
-		case MMC_VDD_28_29:
-			vmmc = VMMC1_285V;
-			/* and VSIM_280V */
-			break;
-		case MMC_VDD_29_30:
-		case MMC_VDD_30_31:
-			vmmc = VMMC1_300V;
-			/* and VSIM_300V */
-			break;
-		case MMC_VDD_31_32:
-			vmmc = VMMC1_315V;
-			/* error if VSIM needed */
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
-		/* VMMC2:  max 100 mA */
-		switch (1 << vdd) {
-		case MMC_VDD_165_195:
-			vmmc = VMMC2_185V;
-			break;
-		case MMC_VDD_25_26:
-		case MMC_VDD_26_27:
-			vmmc = VMMC2_260V;
-			break;
-		case MMC_VDD_27_28:
-			vmmc = VMMC2_280V;
-			break;
-		case MMC_VDD_28_29:
-			vmmc = VMMC2_285V;
-			break;
-		case MMC_VDD_29_30:
-		case MMC_VDD_30_31:
-			vmmc = VMMC2_300V;
-			break;
-		case MMC_VDD_31_32:
-			vmmc = VMMC2_315V;
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else {
-		return -EINVAL;
-	}
-
-doit:
-	if (vdd)
-		dev_grp_val = VMMC_DEV_GRP_P1;	/* Power up */
-	else
-		dev_grp_val = LDO_CLR;		/* Power down */
-
-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-					dev_grp_val, c->twl_vmmc_dev_grp);
-	if (ret || !vdd)
-		return ret;
-
-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-					vmmc, c->twl_mmc_dedicated);
-
-	return ret;
-}
-
 static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
@@ -273,11 +202,13 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 
 	/*
 	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
-	 * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
 	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
 	 *
 	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
 	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 *
+	 * FIXME handle VMMC1A as needed ...
 	 */
 	if (power_on) {
 		if (cpu_is_omap2430()) {
@@ -300,7 +231,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
-		ret = twl_mmc_set_voltage(c, vdd);
+		ret = mmc_regulator_set_ocr(c->vcc, vdd);
 
 		/* 100ms delay required for PBIAS configuration */
 		msleep(100);
@@ -316,7 +247,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
-		ret = twl_mmc_set_voltage(c, 0);
+		ret = mmc_regulator_set_ocr(c->vcc, 0);
 
 		/* 100ms delay required for PBIAS configuration */
 		msleep(100);
@@ -329,19 +260,33 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 	return ret;
 }
 
-static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
+static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
 {
-	int ret;
+	int ret = 0;
 	struct twl_mmc_controller *c = &hsmmc[1];
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
 
+	/* If we don't see a Vcc regulator, assume it's a fixed
+	 * voltage always-on regulator.
+	 */
+	if (!c->vcc)
+		return 0;
+
 	/*
-	 * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+	 * Assume Vcc regulator is used only to power the card ... OMAP
 	 * VDDS is used to power the pins, optionally with a transceiver to
 	 * support cards using voltages other than VDDS (1.8V nominal).  When a
 	 * transceiver is used, DAT3..7 are muxed as transceiver control pins.
+	 *
+	 * In some cases this regulator won't support enable/disable;
+	 * e.g. it's a fixed rail for a WLAN chip.
+	 *
+	 * In other cases vcc_aux switches interface power.  Example, for
+	 * eMMC cards it represents VccQ.  Sometimes transceivers or SDIO
+	 * chips/cards need an interface voltage rail too.
 	 */
 	if (power_on) {
+		/* only MMC2 supports a CLKIN */
 		if (mmc->slots[0].internal_clock) {
 			u32 reg;
 
@@ -349,24 +294,23 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
 			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
 			omap_ctrl_writel(reg, control_devconf1_offset);
 		}
-		ret = twl_mmc_set_voltage(c, vdd);
+		ret = mmc_regulator_set_ocr(c->vcc, vdd);
+		/* enable interface voltage rail, if needed */
+		if (ret == 0 && c->vcc_aux) {
+			ret = regulator_enable(c->vcc_aux);
+			if (ret < 0)
+				ret = mmc_regulator_set_ocr(c->vcc, 0);
+		}
 	} else {
-		ret = twl_mmc_set_voltage(c, 0);
+		if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
+			ret = regulator_disable(c->vcc_aux);
+		if (ret == 0)
+			ret = mmc_regulator_set_ocr(c->vcc, 0);
 	}
 
 	return ret;
 }
 
-static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
-		int vdd)
-{
-	/*
-	 * Assume MMC3 has self-powered device connected, for example on-board
-	 * chip with external power source.
-	 */
-	return 0;
-}
-
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
 
 void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -412,10 +356,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		mmc->slots[0].wires = c->wires;
 		mmc->slots[0].internal_clock = !c->ext_clock;
 		mmc->dma_mask = 0xffffffff;
+		mmc->init = twl_mmc_late_init;
 
-		/* note: twl4030 card detect GPIOs normally switch VMMCx ... */
+		/* note: twl4030 card detect GPIOs can disable VMMCx ... */
 		if (gpio_is_valid(c->gpio_cd)) {
-			mmc->init = twl_mmc_late_init;
 			mmc->cleanup = twl_mmc_cleanup;
 			mmc->suspend = twl_mmc_suspend;
 			mmc->resume = twl_mmc_resume;
@@ -439,26 +383,28 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		} else
 			mmc->slots[0].gpio_wp = -EINVAL;
 
-		/* NOTE:  we assume OMAP's MMC1 and MMC2 use
-		 * the TWL4030's VMMC1 and VMMC2, respectively;
-		 * and that MMC3 device has it's own power source.
+		/* NOTE:  MMC slots should have a Vcc regulator set up.
+		 * This may be from a TWL4030-family chip, another
+		 * controllable regulator, or a fixed supply.
+		 *
+		 * temporary HACK: ocr_mask instead of fixed supply
 		 */
+		mmc->slots[0].ocr_mask = c->ocr_mask;
 
 		switch (c->mmc) {
 		case 1:
+			/* on-chip level shifting via PBIAS0/PBIAS1 */
 			mmc->slots[0].set_power = twl_mmc1_set_power;
-			mmc->slots[0].ocr_mask = MMC1_OCR;
 			break;
 		case 2:
-			mmc->slots[0].set_power = twl_mmc2_set_power;
-			if (c->transceiver)
-				mmc->slots[0].ocr_mask = MMC2_OCR;
-			else
-				mmc->slots[0].ocr_mask = MMC_VDD_165_195;
-			break;
+			if (c->ext_clock)
+				c->transceiver = 1;
+			if (c->transceiver && c->wires > 4)
+				c->wires = 4;
+			/* FALLTHROUGH */
 		case 3:
-			mmc->slots[0].set_power = twl_mmc3_set_power;
-			mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+			/* off-chip level shifting, or none */
+			mmc->slots[0].set_power = twl_mmc23_set_power;
 			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index ea59e862429..3807c45c9a6 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -16,9 +16,10 @@ struct twl4030_hsmmc_info {
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
 	struct device *dev;	/* returned: pointer to mmc adapter */
+	int	ocr_mask;	/* temporary HACK */
 };
 
-#if	defined(CONFIG_TWL4030_CORE) && \
+#if defined(CONFIG_REGULATOR) && \
 	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
 	 defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
new file mode 100644
index 00000000000..4afadba0947
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -0,0 +1,46 @@
+/*
+ * Secondary CPU startup routine source file.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/* Physical address needed since MMU not enabled yet on secondary core */
+#define OMAP4_AUX_CORE_BOOT1_PA			0x48281804
+
+	__INIT
+
+/*
+ * OMAP4 specific entry point for secondary CPU to jump from ROM
+ * code.  This routine also provides a holding flag into which
+ * secondary core is held until we're ready for it to initialise.
+ * The primary core will update the this flag using a hardware
+ * register AuxCoreBoot1.
+ */
+ENTRY(omap_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #0x0f
+hold:	ldr	r1, =OMAP4_AUX_CORE_BOOT1_PA	@ read from AuxCoreBoot1
+	ldr	r2, [r1]
+	cmp	r2, r0
+	bne	hold
+
+	/*
+	 * we've been released from the cpu_release,secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
new file mode 100644
index 00000000000..8fe8d230f21
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -0,0 +1,178 @@
+/*
+ * OMAP4 SMP source file. It contains platform specific fucntions
+ * needed for the linux smp kernel.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Platform file needed for the OMAP4 SMP. This file is based on arm
+ * realview smp platform.
+ * * Copyright (c) 2002 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/* Registers used for communicating startup information */
+#define OMAP4_AUXCOREBOOT_REG0		(OMAP44XX_VA_WKUPGEN_BASE + 0x800)
+#define OMAP4_AUXCOREBOOT_REG1		(OMAP44XX_VA_WKUPGEN_BASE + 0x804)
+
+/* SCU base address */
+static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
+
+/*
+ * Use SCU config register to count number of cores
+ */
+static inline unsigned int get_core_count(void)
+{
+	if (scu_base)
+		return scu_get_core_count(scu_base);
+	return 1;
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * If any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+
+	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * Update the AuxCoreBoot1 with boot state for secondary core.
+	 * omap_secondary_startup() routine will hold the secondary core till
+	 * the AuxCoreBoot1 register is updated with cpu state
+	 * A barrier is added to ensure that write buffer is drained
+	 */
+	__raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
+	smp_wmb();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout))
+		;
+
+	/*
+	 * Now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+	/*
+	 * Write the address of secondary startup routine into the
+	 * AuxCoreBoot0 where ROM code will jump and start executing
+	 * on secondary core once out of WFE
+	 * A barrier is added to ensure that write buffer is drained
+	 */
+	__raw_writel(virt_to_phys(omap_secondary_startup),	   \
+					OMAP4_AUXCOREBOOT_REG0);
+	smp_wmb();
+
+	/*
+	 * Send a 'sev' to wake the secondary core from WFE.
+	 */
+	set_event();
+	mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = get_core_count();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "OMAP4: strange core count of 0? Default to 1\n");
+		ncores = 1;
+	}
+
+	if (ncores > NR_CPUS) {
+		printk(KERN_WARNING
+		       "OMAP4: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		/*
+		 * Initialise the SCU and wake up the secondary core using
+		 * wakeup_secondary().
+		 */
+		scu_enable(scu_base);
+		wakeup_secondary();
+	}
+}
diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c
new file mode 100644
index 00000000000..194189c746c
--- /dev/null
+++ b/arch/arm/mach-omap2/omap3-iommu.c
@@ -0,0 +1,105 @@
+/*
+ * omap iommu: omap3 device registration
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/iommu.h>
+
+#define OMAP3_MMU1_BASE	0x480bd400
+#define OMAP3_MMU2_BASE	0x5d000000
+#define OMAP3_MMU1_IRQ	24
+#define OMAP3_MMU2_IRQ	28
+
+
+static unsigned long iommu_base[] __initdata = {
+	OMAP3_MMU1_BASE,
+	OMAP3_MMU2_BASE,
+};
+
+static int iommu_irq[] __initdata = {
+	OMAP3_MMU1_IRQ,
+	OMAP3_MMU2_IRQ,
+};
+
+static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = {
+	{
+		.name = "isp",
+		.nr_tlb_entries = 8,
+		.clk_name = "cam_ick",
+	},
+#if defined(CONFIG_MPU_BRIDGE_IOMMU)
+	{
+		.name = "iva2",
+		.nr_tlb_entries = 32,
+		.clk_name = "iva2_ck",
+	},
+#endif
+};
+#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata)
+
+static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
+
+static int __init omap3_iommu_init(void)
+{
+	int i, err;
+
+	for (i = 0; i < NR_IOMMU_DEVICES; i++) {
+		struct platform_device *pdev;
+		struct resource res[2];
+
+		pdev = platform_device_alloc("omap-iommu", i);
+		if (!pdev) {
+			err = -ENOMEM;
+			goto err_out;
+		}
+
+		memset(res, 0,  sizeof(res));
+		res[0].start = iommu_base[i];
+		res[0].end = iommu_base[i] + MMU_REG_SIZE - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = res[1].end = iommu_irq[i];
+		res[1].flags = IORESOURCE_IRQ;
+
+		err = platform_device_add_resources(pdev, res,
+						    ARRAY_SIZE(res));
+		if (err)
+			goto err_out;
+		err = platform_device_add_data(pdev, &omap3_iommu_pdata[i],
+					       sizeof(omap3_iommu_pdata[0]));
+		if (err)
+			goto err_out;
+		err = platform_device_add(pdev);
+		if (err)
+			goto err_out;
+		omap3_iommu_pdev[i] = pdev;
+	}
+	return 0;
+
+err_out:
+	while (i--)
+		platform_device_put(omap3_iommu_pdev[i]);
+	return err;
+}
+module_init(omap3_iommu_init);
+
+static void __exit omap3_iommu_exit(void)
+{
+	int i;
+
+	for (i = 0; i < NR_IOMMU_DEVICES; i++)
+		platform_device_unregister(omap3_iommu_pdev[i]);
+}
+module_exit(omap3_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("omap iommu: omap3 device registration");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
new file mode 100644
index 00000000000..6cc375a275b
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -0,0 +1,152 @@
+/*
+ * OMAP Power Management debug routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ * Jouni Hogander
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "pm.h"
+
+int omap2_pm_debug;
+
+#define DUMP_PRM_MOD_REG(mod, reg)    \
+	regs[reg_count].name = #mod "." #reg; \
+	regs[reg_count++].val = prm_read_mod_reg(mod, reg)
+#define DUMP_CM_MOD_REG(mod, reg)     \
+	regs[reg_count].name = #mod "." #reg; \
+	regs[reg_count++].val = cm_read_mod_reg(mod, reg)
+#define DUMP_PRM_REG(reg) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_CM_REG(reg) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_INTC_REG(reg, off) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+
+void omap2_pm_dump(int mode, int resume, unsigned int us)
+{
+	struct reg {
+		const char *name;
+		u32 val;
+	} regs[32];
+	int reg_count = 0, i;
+	const char *s1 = NULL, *s2 = NULL;
+
+	if (!resume) {
+#if 0
+		/* MPU */
+		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
+		DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
+#endif
+#if 0
+		/* INTC */
+		DUMP_INTC_REG(INTC_MIR0, 0x0084);
+		DUMP_INTC_REG(INTC_MIR1, 0x00a4);
+		DUMP_INTC_REG(INTC_MIR2, 0x00c4);
+#endif
+#if 0
+		DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
+		if (cpu_is_omap24xx()) {
+			DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+					OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
+			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+					OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
+		}
+		DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
+		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
+		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
+		DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
+		DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
+		DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
+		DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
+#endif
+#if 0
+		/* DSP */
+		if (cpu_is_omap24xx()) {
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
+		}
+#endif
+	} else {
+		DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
+		if (cpu_is_omap24xx())
+			DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
+		DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
+		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+#if 1
+		DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
+		DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
+		DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
+#endif
+	}
+
+	switch (mode) {
+	case 0:
+		s1 = "full";
+		s2 = "retention";
+		break;
+	case 1:
+		s1 = "MPU";
+		s2 = "retention";
+		break;
+	case 2:
+		s1 = "MPU";
+		s2 = "idle";
+		break;
+	}
+
+	if (!resume)
+#ifdef CONFIG_NO_HZ
+		printk(KERN_INFO
+		       "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
+		       jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
+					jiffies));
+#else
+		printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
+#endif
+	else
+		printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
+			us / 1000, us % 1000);
+
+	for (i = 0; i < reg_count; i++)
+		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
deleted file mode 100644
index ea8ceaed09c..00000000000
--- a/arch/arm/mach-omap2/pm.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/pm.c
- *
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Based on pm.c for omap1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/pm.h>
-
-static struct clk *vclk;
-static void (*omap2_sram_idle)(void);
-static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
-static void (*saved_idle)(void);
-
-extern void __init pmdomain_init(void);
-extern void pmdomain_set_autoidle(void);
-
-static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
-
-void omap2_pm_idle(void)
-{
-	local_irq_disable();
-	local_fiq_disable();
-	if (need_resched()) {
-		local_fiq_enable();
-		local_irq_enable();
-		return;
-	}
-
-	omap2_sram_idle();
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static int omap2_pm_prepare(void)
-{
-	/* We cannot sleep in idle until we have resumed */
-	saved_idle = pm_idle;
-	pm_idle = NULL;
-	return 0;
-}
-
-static int omap2_pm_suspend(void)
-{
-	return 0;
-}
-
-static int omap2_pm_enter(suspend_state_t state)
-{
-	int ret = 0;
-
-	switch (state)
-	{
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		ret = omap2_pm_suspend();
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static void omap2_pm_finish(void)
-{
-	pm_idle = saved_idle;
-}
-
-static struct platform_suspend_ops omap_pm_ops = {
-	.prepare	= omap2_pm_prepare,
-	.enter		= omap2_pm_enter,
-	.finish		= omap2_pm_finish,
-	.valid		= suspend_valid_only_mem,
-};
-
-static int __init omap2_pm_init(void)
-{
-	return 0;
-}
-
-__initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
new file mode 100644
index 00000000000..f7b3baf7667
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.h
@@ -0,0 +1,38 @@
+/*
+ * OMAP2/3 Power Management Routines
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Jouni Hogander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
+#define __ARCH_ARM_MACH_OMAP2_PM_H
+
+extern int omap2_pm_init(void);
+extern int omap3_pm_init(void);
+
+#ifdef CONFIG_PM_DEBUG
+extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us)		do {} while (0);
+#define omap2_pm_debug				0
+#endif /* CONFIG_PM_DEBUG */
+
+extern void omap24xx_idle_loop_suspend(void);
+
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+					void __iomem *sdrc_power);
+extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
+extern void save_secure_ram_context(u32 *addr);
+
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+extern unsigned int omap34xx_suspend_sz;
+extern unsigned int save_secure_ram_context_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap34xx_cpu_suspend_sz;
+
+#endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
new file mode 100644
index 00000000000..db1025562fb
--- /dev/null
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -0,0 +1,549 @@
+/*
+ * OMAP2 Power Management Routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "pm.h"
+
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+static void (*omap2_sram_idle)(void);
+static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
+				  void __iomem *sdrc_power);
+
+static struct powerdomain *mpu_pwrdm;
+static struct powerdomain *core_pwrdm;
+
+static struct clockdomain *dsp_clkdm;
+static struct clockdomain *gfx_clkdm;
+
+static struct clk *osc_ck, *emul_ck;
+
+static int omap2_fclks_active(void)
+{
+	u32 f1, f2;
+
+	f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
+	f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2);
+	f2 &= ~OMAP24XX_EN_UART3;
+
+	if (f1 | f2)
+		return 1;
+	return 0;
+}
+
+static void omap2_enter_full_retention(void)
+{
+	u32 l;
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+
+	/* There is 1 reference hold for all children of the oscillator
+	 * clock, the following will remove it. If no one else uses the
+	 * oscillator itself it will be disabled if/when we enter retention
+	 * mode.
+	 */
+	clk_disable(osc_ck);
+
+	/* Clear old wake-up events */
+	/* REVISIT: These write to reserved bits? */
+	prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+	prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+	/*
+	 * Set MPU powerdomain's next power state to RETENTION;
+	 * preserve logic state during retention
+	 */
+	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+	/* Workaround to kill USB */
+	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
+	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
+
+	omap2_gpio_prepare_for_retention();
+
+	if (omap2_pm_debug) {
+		omap2_pm_dump(0, 0, 0);
+		getnstimeofday(&ts_preidle);
+	}
+
+	/* One last check for pending IRQs to avoid extra latency due
+	 * to sleeping unnecessarily. */
+	if (omap_irq_pending())
+		goto no_sleep;
+
+	omap_uart_prepare_idle(0);
+	omap_uart_prepare_idle(1);
+	omap_uart_prepare_idle(2);
+
+	/* Jump to SRAM suspend code */
+	omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
+			   OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
+			   OMAP_SDRC_REGADDR(SDRC_POWER));
+
+	omap_uart_resume_idle(2);
+	omap_uart_resume_idle(1);
+	omap_uart_resume_idle(0);
+
+no_sleep:
+	if (omap2_pm_debug) {
+		unsigned long long tmp;
+
+		getnstimeofday(&ts_postidle);
+		ts_idle = timespec_sub(ts_postidle, ts_preidle);
+		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+		omap2_pm_dump(0, 1, tmp);
+	}
+	omap2_gpio_resume_after_retention();
+
+	clk_enable(osc_ck);
+
+	/* clear CORE wake-up events */
+	prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+
+	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
+	prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+
+	/* MPU domain wake events */
+	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	if (l & 0x01)
+		prm_write_mod_reg(0x01, OCP_MOD,
+				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	if (l & 0x20)
+		prm_write_mod_reg(0x20, OCP_MOD,
+				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+
+	/* Mask future PRCM-to-MPU interrupts */
+	prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+}
+
+static int omap2_i2c_active(void)
+{
+	u32 l;
+
+	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+}
+
+static int sti_console_enabled;
+
+static int omap2_allow_mpu_retention(void)
+{
+	u32 l;
+
+	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
+		 OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
+		 OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+		return 0;
+	/* Check for UART3. */
+	l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+	if (l & OMAP24XX_EN_UART3)
+		return 0;
+	if (sti_console_enabled)
+		return 0;
+
+	return 1;
+}
+
+static void omap2_enter_mpu_retention(void)
+{
+	int only_idle = 0;
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+
+	/* Putting MPU into the WFI state while a transfer is active
+	 * seems to cause the I2C block to timeout. Why? Good question. */
+	if (omap2_i2c_active())
+		return;
+
+	/* The peripherals seem not to be able to wake up the MPU when
+	 * it is in retention mode. */
+	if (omap2_allow_mpu_retention()) {
+		/* REVISIT: These write to reserved bits? */
+		prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+		prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+		prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+		/* Try to enter MPU retention */
+		prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
+				  OMAP_LOGICRETSTATE,
+				  MPU_MOD, PM_PWSTCTRL);
+	} else {
+		/* Block MPU retention */
+
+		prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL);
+		only_idle = 1;
+	}
+
+	if (omap2_pm_debug) {
+		omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
+		getnstimeofday(&ts_preidle);
+	}
+
+	omap2_sram_idle();
+
+	if (omap2_pm_debug) {
+		unsigned long long tmp;
+
+		getnstimeofday(&ts_postidle);
+		ts_idle = timespec_sub(ts_postidle, ts_preidle);
+		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+		omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
+	}
+}
+
+static int omap2_can_sleep(void)
+{
+	if (omap2_fclks_active())
+		return 0;
+	if (osc_ck->usecount > 1)
+		return 0;
+	if (omap_dma_running())
+		return 0;
+
+	return 1;
+}
+
+static void omap2_pm_idle(void)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!omap2_can_sleep()) {
+		if (omap_irq_pending())
+			goto out;
+		omap2_enter_mpu_retention();
+		goto out;
+	}
+
+	if (omap_irq_pending())
+		goto out;
+
+	omap2_enter_full_retention();
+
+out:
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static int omap2_pm_prepare(void)
+{
+	/* We cannot sleep in idle until we have resumed */
+	disable_hlt();
+	return 0;
+}
+
+static int omap2_pm_suspend(void)
+{
+	u32 wken_wkup, mir1;
+
+	wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+	prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+
+	/* Mask GPT1 */
+	mir1 = omap_readl(0x480fe0a4);
+	omap_writel(1 << 5, 0x480fe0ac);
+
+	omap_uart_prepare_suspend();
+	omap2_enter_full_retention();
+
+	omap_writel(mir1, 0x480fe0a4);
+	prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
+
+	return 0;
+}
+
+static int omap2_pm_enter(suspend_state_t state)
+{
+	int ret = 0;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap2_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void omap2_pm_finish(void)
+{
+	enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+	.prepare	= omap2_pm_prepare,
+	.enter		= omap2_pm_enter,
+	.finish		= omap2_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+{
+	omap2_clkdm_allow_idle(clkdm);
+	return 0;
+}
+
+static void __init prcm_setup_regs(void)
+{
+	int i, num_mem_banks;
+	struct powerdomain *pwrdm;
+
+	/* Enable autoidle */
+	prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+			  OMAP2_PRCM_SYSCONFIG_OFFSET);
+
+	/* Set all domain wakeup dependencies */
+	prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, CORE_MOD, PM_WKDEP);
+	if (cpu_is_omap2430())
+		prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP);
+
+	/*
+	 * Set CORE powerdomain memory banks to retain their contents
+	 * during RETENTION
+	 */
+	num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
+	for (i = 0; i < num_mem_banks; i++)
+		pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
+
+	/* Set CORE powerdomain's next power state to RETENTION */
+	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+
+	/*
+	 * Set MPU powerdomain's next power state to RETENTION;
+	 * preserve logic state during retention
+	 */
+	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+	/* Force-power down DSP, GFX powerdomains */
+
+	pwrdm = clkdm_get_pwrdm(dsp_clkdm);
+	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+	omap2_clkdm_sleep(dsp_clkdm);
+
+	pwrdm = clkdm_get_pwrdm(gfx_clkdm);
+	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+	omap2_clkdm_sleep(gfx_clkdm);
+
+	/* Enable clockdomain hardware-supervised control for all clkdms */
+	clkdm_for_each(_pm_clkdm_enable_hwsup);
+
+	/* Enable clock autoidle for all domains */
+	cm_write_mod_reg(OMAP24XX_AUTO_CAM |
+			 OMAP24XX_AUTO_MAILBOXES |
+			 OMAP24XX_AUTO_WDT4 |
+			 OMAP2420_AUTO_WDT3 |
+			 OMAP24XX_AUTO_MSPRO |
+			 OMAP2420_AUTO_MMC |
+			 OMAP24XX_AUTO_FAC |
+			 OMAP2420_AUTO_EAC |
+			 OMAP24XX_AUTO_HDQ |
+			 OMAP24XX_AUTO_UART2 |
+			 OMAP24XX_AUTO_UART1 |
+			 OMAP24XX_AUTO_I2C2 |
+			 OMAP24XX_AUTO_I2C1 |
+			 OMAP24XX_AUTO_MCSPI2 |
+			 OMAP24XX_AUTO_MCSPI1 |
+			 OMAP24XX_AUTO_MCBSP2 |
+			 OMAP24XX_AUTO_MCBSP1 |
+			 OMAP24XX_AUTO_GPT12 |
+			 OMAP24XX_AUTO_GPT11 |
+			 OMAP24XX_AUTO_GPT10 |
+			 OMAP24XX_AUTO_GPT9 |
+			 OMAP24XX_AUTO_GPT8 |
+			 OMAP24XX_AUTO_GPT7 |
+			 OMAP24XX_AUTO_GPT6 |
+			 OMAP24XX_AUTO_GPT5 |
+			 OMAP24XX_AUTO_GPT4 |
+			 OMAP24XX_AUTO_GPT3 |
+			 OMAP24XX_AUTO_GPT2 |
+			 OMAP2420_AUTO_VLYNQ |
+			 OMAP24XX_AUTO_DSS,
+			 CORE_MOD, CM_AUTOIDLE1);
+	cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
+			 OMAP24XX_AUTO_SSI |
+			 OMAP24XX_AUTO_USB,
+			 CORE_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
+			 OMAP24XX_AUTO_GPMC |
+			 OMAP24XX_AUTO_SDMA,
+			 CORE_MOD, CM_AUTOIDLE3);
+	cm_write_mod_reg(OMAP24XX_AUTO_PKA |
+			 OMAP24XX_AUTO_AES |
+			 OMAP24XX_AUTO_RNG |
+			 OMAP24XX_AUTO_SHA |
+			 OMAP24XX_AUTO_DES,
+			 CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
+
+	cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+
+	/* Put DPLL and both APLLs into autoidle mode */
+	cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
+			 (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
+			 (0x03 << OMAP24XX_AUTO_54M_SHIFT),
+			 PLL_MOD, CM_AUTOIDLE);
+
+	cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
+			 OMAP24XX_AUTO_WDT1 |
+			 OMAP24XX_AUTO_MPU_WDT |
+			 OMAP24XX_AUTO_GPIOS |
+			 OMAP24XX_AUTO_32KSYNC |
+			 OMAP24XX_AUTO_GPT1,
+			 WKUP_MOD, CM_AUTOIDLE);
+
+	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
+	 * stabilisation */
+	prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+			  OMAP2_PRCM_CLKSSETUP_OFFSET);
+
+	/* Configure automatic voltage transition */
+	prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+			  OMAP2_PRCM_VOLTSETUP_OFFSET);
+	prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+			  (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
+			  OMAP24XX_MEMRETCTRL |
+			  (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
+			  (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
+			  OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
+
+	/* Enable wake-up events */
+	prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+			  WKUP_MOD, PM_WKEN);
+}
+
+int __init omap2_pm_init(void)
+{
+	u32 l;
+
+	if (!cpu_is_omap24xx())
+		return -ENODEV;
+
+	printk(KERN_INFO "Power Management for OMAP2 initializing\n");
+	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
+	printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+
+	/* Look up important powerdomains, clockdomains */
+
+	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+	if (!mpu_pwrdm)
+		pr_err("PM: mpu_pwrdm not found\n");
+
+	core_pwrdm = pwrdm_lookup("core_pwrdm");
+	if (!core_pwrdm)
+		pr_err("PM: core_pwrdm not found\n");
+
+	dsp_clkdm = clkdm_lookup("dsp_clkdm");
+	if (!dsp_clkdm)
+		pr_err("PM: mpu_clkdm not found\n");
+
+	gfx_clkdm = clkdm_lookup("gfx_clkdm");
+	if (!gfx_clkdm)
+		pr_err("PM: gfx_clkdm not found\n");
+
+
+	osc_ck = clk_get(NULL, "osc_ck");
+	if (IS_ERR(osc_ck)) {
+		printk(KERN_ERR "could not get osc_ck\n");
+		return -ENODEV;
+	}
+
+	if (cpu_is_omap242x()) {
+		emul_ck = clk_get(NULL, "emul_ck");
+		if (IS_ERR(emul_ck)) {
+			printk(KERN_ERR "could not get emul_ck\n");
+			clk_put(osc_ck);
+			return -ENODEV;
+		}
+	}
+
+	prcm_setup_regs();
+
+	/* Hack to prevent MPU retention when STI console is enabled. */
+	{
+		const struct omap_sti_console_config *sti;
+
+		sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
+				      struct omap_sti_console_config);
+		if (sti != NULL && sti->enable)
+			sti_console_enabled = 1;
+	}
+
+	/*
+	 * We copy the assembler sleep/wakeup routines to SRAM.
+	 * These routines need to be in SRAM as that's the only
+	 * memory the MPU can see when it wakes up.
+	 */
+	if (cpu_is_omap24xx()) {
+		omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+						 omap24xx_idle_loop_suspend_sz);
+
+		omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+						    omap24xx_cpu_suspend_sz);
+	}
+
+	suspend_set_ops(&omap_pm_ops);
+	pm_idle = omap2_pm_idle;
+
+	return 0;
+}
+
+late_initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
new file mode 100644
index 00000000000..841d4c5ed8b
--- /dev/null
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -0,0 +1,710 @@
+/*
+ * OMAP3 Power Management Routines
+ *
+ * Copyright (C) 2006-2008 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Jouni Hogander
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include <mach/sram.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/control.h>
+#include <mach/serial.h>
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+#include "prm.h"
+#include "pm.h"
+
+struct power_state {
+	struct powerdomain *pwrdm;
+	u32 next_state;
+	u32 saved_state;
+	struct list_head node;
+};
+
+static LIST_HEAD(pwrst_list);
+
+static void (*_omap_sram_idle)(u32 *addr, int save_state);
+
+static struct powerdomain *mpu_pwrdm;
+
+/* PRCM Interrupt Handler for wakeups */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+	u32 wkst, irqstatus_mpu;
+	u32 fclk, iclk;
+
+	/* WKUP */
+	wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+	if (wkst) {
+		iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+		fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
+		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
+		prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
+		while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
+			cpu_relax();
+		cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
+		cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+	}
+
+	/* CORE */
+	wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
+	if (wkst) {
+		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+		fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
+		prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
+		while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
+			cpu_relax();
+		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
+		cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
+	}
+	wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
+	if (wkst) {
+		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+		fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+		prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
+		while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
+			cpu_relax();
+		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
+		cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+	}
+
+	/* PER */
+	wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
+	if (wkst) {
+		iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+		fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
+		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
+		prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
+		while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
+			cpu_relax();
+		cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
+		cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
+	}
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		/* USBHOST */
+		wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
+		if (wkst) {
+			iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					       CM_ICLKEN);
+			fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					       CM_FCLKEN);
+			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+					    CM_ICLKEN);
+			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+					    CM_FCLKEN);
+			prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
+					  PM_WKST);
+			while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+						PM_WKST))
+				cpu_relax();
+			cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
+					 CM_ICLKEN);
+			cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
+					 CM_FCLKEN);
+		}
+	}
+
+	irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+			  OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
+		cpu_relax();
+
+	return IRQ_HANDLED;
+}
+
+static void omap_sram_idle(void)
+{
+	/* Variable to tell what needs to be saved and restored
+	 * in omap_sram_idle*/
+	/* save_state = 0 => Nothing to save and restored */
+	/* save_state = 1 => Only L1 and logic lost */
+	/* save_state = 2 => Only L2 lost */
+	/* save_state = 3 => L1, L2 and logic lost */
+	int save_state = 0, mpu_next_state;
+
+	if (!_omap_sram_idle)
+		return;
+
+	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
+	switch (mpu_next_state) {
+	case PWRDM_POWER_RET:
+		/* No need to save context */
+		save_state = 0;
+		break;
+	default:
+		/* Invalid state */
+		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+		return;
+	}
+	omap2_gpio_prepare_for_retention();
+	omap_uart_prepare_idle(0);
+	omap_uart_prepare_idle(1);
+	omap_uart_prepare_idle(2);
+
+	_omap_sram_idle(NULL, save_state);
+	cpu_init();
+
+	omap_uart_resume_idle(2);
+	omap_uart_resume_idle(1);
+	omap_uart_resume_idle(0);
+	omap2_gpio_resume_after_retention();
+}
+
+/*
+ * Check if functional clocks are enabled before entering
+ * sleep. This function could be behind CONFIG_PM_DEBUG
+ * when all drivers are configuring their sysconfig registers
+ * properly and using their clocks properly.
+ */
+static int omap3_fclks_active(void)
+{
+	u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
+		fck_cam = 0, fck_per = 0, fck_usbhost = 0;
+
+	fck_core1 = cm_read_mod_reg(CORE_MOD,
+				    CM_FCLKEN1);
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		fck_core3 = cm_read_mod_reg(CORE_MOD,
+					    OMAP3430ES2_CM_FCLKEN3);
+		fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+					  CM_FCLKEN);
+		fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					      CM_FCLKEN);
+	} else
+		fck_sgx = cm_read_mod_reg(GFX_MOD,
+					  OMAP3430ES2_CM_FCLKEN3);
+	fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
+				  CM_FCLKEN);
+	fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
+				  CM_FCLKEN);
+	fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
+				  CM_FCLKEN);
+
+	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
+	fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
+	fck_per &= ~OMAP3430_EN_UART3;
+
+	if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
+	    fck_cam | fck_per | fck_usbhost)
+		return 1;
+	return 0;
+}
+
+static int omap3_can_sleep(void)
+{
+	if (!omap_uart_can_sleep())
+		return 0;
+	if (omap3_fclks_active())
+		return 0;
+	return 1;
+}
+
+/* This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled. */
+static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+	u32 cur_state;
+	int sleep_switch = 0;
+	int ret = 0;
+
+	if (pwrdm == NULL || IS_ERR(pwrdm))
+		return -EINVAL;
+
+	while (!(pwrdm->pwrsts & (1 << state))) {
+		if (state == PWRDM_POWER_OFF)
+			return ret;
+		state--;
+	}
+
+	cur_state = pwrdm_read_next_pwrst(pwrdm);
+	if (cur_state == state)
+		return ret;
+
+	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+		sleep_switch = 1;
+		pwrdm_wait_transition(pwrdm);
+	}
+
+	ret = pwrdm_set_next_pwrst(pwrdm, state);
+	if (ret) {
+		printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+		       pwrdm->name);
+		goto err;
+	}
+
+	if (sleep_switch) {
+		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+		pwrdm_wait_transition(pwrdm);
+	}
+
+err:
+	return ret;
+}
+
+static void omap3_pm_idle(void)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!omap3_can_sleep())
+		goto out;
+
+	if (omap_irq_pending())
+		goto out;
+
+	omap_sram_idle();
+
+out:
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static int omap3_pm_prepare(void)
+{
+	disable_hlt();
+	return 0;
+}
+
+static int omap3_pm_suspend(void)
+{
+	struct power_state *pwrst;
+	int state, ret = 0;
+
+	/* Read current next_pwrsts */
+	list_for_each_entry(pwrst, &pwrst_list, node)
+		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+	/* Set ones wanted by suspend */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+			goto restore;
+		if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
+			goto restore;
+	}
+
+	omap_uart_prepare_suspend();
+	omap_sram_idle();
+
+restore:
+	/* Restore next_pwrsts */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+		if (state > pwrst->next_state) {
+			printk(KERN_INFO "Powerdomain (%s) didn't enter "
+			       "target state %d\n",
+			       pwrst->pwrdm->name, pwrst->next_state);
+			ret = -1;
+		}
+	}
+	if (ret)
+		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+	else
+		printk(KERN_INFO "Successfully put all powerdomains "
+		       "to target state\n");
+
+	return ret;
+}
+
+static int omap3_pm_enter(suspend_state_t state)
+{
+	int ret = 0;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap3_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void omap3_pm_finish(void)
+{
+	enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+	.prepare	= omap3_pm_prepare,
+	.enter		= omap3_pm_enter,
+	.finish		= omap3_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+
+/**
+ * omap3_iva_idle(): ensure IVA is in idle so it can be put into
+ *                   retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle.  This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ *
+ **/
+static void __init omap3_iva_idle(void)
+{
+	/* ensure IVA2 clock is disabled */
+	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* if no clock activity, nothing else to do */
+	if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+	      OMAP3430_CLKACTIVITY_IVA2_MASK))
+		return;
+
+	/* Reset IVA2 */
+	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+			  OMAP3430_RST2_IVA2 |
+			  OMAP3430_RST3_IVA2,
+			  OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+	/* Enable IVA2 clock */
+	cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2,
+			 OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* Set IVA2 boot mode to 'idle' */
+	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+			 OMAP343X_CONTROL_IVA2_BOOTMOD);
+
+	/* Un-reset IVA2 */
+	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+	/* Disable IVA2 clock */
+	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* Reset IVA2 */
+	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+			  OMAP3430_RST2_IVA2 |
+			  OMAP3430_RST3_IVA2,
+			  OMAP3430_IVA2_MOD, RM_RSTCTRL);
+}
+
+static void __init omap3_d2d_idle(void)
+{
+	u16 mask, padconf;
+
+	/* In a stand alone OMAP3430 where there is not a stacked
+	 * modem for the D2D Idle Ack and D2D MStandby must be pulled
+	 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+	 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
+	mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+
+	/* reset modem */
+	prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
+			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
+			  CORE_MOD, RM_RSTCTRL);
+	prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL);
+}
+
+static void __init prcm_setup_regs(void)
+{
+	/* XXX Reset all wkdeps. This should be done when initializing
+	 * powerdomains */
+	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+		prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+	} else
+		prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+
+	/*
+	 * Enable interface clock autoidle for all modules.
+	 * Note that in the long run this should be done by clockfw
+	 */
+	cm_write_mod_reg(
+		OMAP3430_AUTO_MODEM |
+		OMAP3430ES2_AUTO_MMC3 |
+		OMAP3430ES2_AUTO_ICR |
+		OMAP3430_AUTO_AES2 |
+		OMAP3430_AUTO_SHA12 |
+		OMAP3430_AUTO_DES2 |
+		OMAP3430_AUTO_MMC2 |
+		OMAP3430_AUTO_MMC1 |
+		OMAP3430_AUTO_MSPRO |
+		OMAP3430_AUTO_HDQ |
+		OMAP3430_AUTO_MCSPI4 |
+		OMAP3430_AUTO_MCSPI3 |
+		OMAP3430_AUTO_MCSPI2 |
+		OMAP3430_AUTO_MCSPI1 |
+		OMAP3430_AUTO_I2C3 |
+		OMAP3430_AUTO_I2C2 |
+		OMAP3430_AUTO_I2C1 |
+		OMAP3430_AUTO_UART2 |
+		OMAP3430_AUTO_UART1 |
+		OMAP3430_AUTO_GPT11 |
+		OMAP3430_AUTO_GPT10 |
+		OMAP3430_AUTO_MCBSP5 |
+		OMAP3430_AUTO_MCBSP1 |
+		OMAP3430ES1_AUTO_FAC | /* This is es1 only */
+		OMAP3430_AUTO_MAILBOXES |
+		OMAP3430_AUTO_OMAPCTRL |
+		OMAP3430ES1_AUTO_FSHOSTUSB |
+		OMAP3430_AUTO_HSOTGUSB |
+		OMAP3430_AUTO_SAD2D |
+		OMAP3430_AUTO_SSI,
+		CORE_MOD, CM_AUTOIDLE1);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_PKA |
+		OMAP3430_AUTO_AES1 |
+		OMAP3430_AUTO_RNG |
+		OMAP3430_AUTO_SHA11 |
+		OMAP3430_AUTO_DES1,
+		CORE_MOD, CM_AUTOIDLE2);
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		cm_write_mod_reg(
+			OMAP3430_AUTO_MAD2D |
+			OMAP3430ES2_AUTO_USBTLL,
+			CORE_MOD, CM_AUTOIDLE3);
+	}
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_WDT2 |
+		OMAP3430_AUTO_WDT1 |
+		OMAP3430_AUTO_GPIO1 |
+		OMAP3430_AUTO_32KSYNC |
+		OMAP3430_AUTO_GPT12 |
+		OMAP3430_AUTO_GPT1 ,
+		WKUP_MOD, CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_DSS,
+		OMAP3430_DSS_MOD,
+		CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_CAM,
+		OMAP3430_CAM_MOD,
+		CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_GPIO6 |
+		OMAP3430_AUTO_GPIO5 |
+		OMAP3430_AUTO_GPIO4 |
+		OMAP3430_AUTO_GPIO3 |
+		OMAP3430_AUTO_GPIO2 |
+		OMAP3430_AUTO_WDT3 |
+		OMAP3430_AUTO_UART3 |
+		OMAP3430_AUTO_GPT9 |
+		OMAP3430_AUTO_GPT8 |
+		OMAP3430_AUTO_GPT7 |
+		OMAP3430_AUTO_GPT6 |
+		OMAP3430_AUTO_GPT5 |
+		OMAP3430_AUTO_GPT4 |
+		OMAP3430_AUTO_GPT3 |
+		OMAP3430_AUTO_GPT2 |
+		OMAP3430_AUTO_MCBSP4 |
+		OMAP3430_AUTO_MCBSP3 |
+		OMAP3430_AUTO_MCBSP2,
+		OMAP3430_PER_MOD,
+		CM_AUTOIDLE);
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		cm_write_mod_reg(
+			OMAP3430ES2_AUTO_USBHOST,
+			OMAP3430ES2_USBHOST_MOD,
+			CM_AUTOIDLE);
+	}
+
+	/*
+	 * Set all plls to autoidle. This is needed until autoidle is
+	 * enabled by clockfw
+	 */
+	cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+			 OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
+			 MPU_MOD,
+			 CM_AUTOIDLE2);
+	cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
+			 (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
+			 PLL_MOD,
+			 CM_AUTOIDLE);
+	cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
+			 PLL_MOD,
+			 CM_AUTOIDLE2);
+
+	/*
+	 * Enable control of expternal oscillator through
+	 * sys_clkreq. In the long run clock framework should
+	 * take care of this.
+	 */
+	prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+			     1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+			     OMAP3430_GR_MOD,
+			     OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+	/* setup wakup source */
+	prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
+			  OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+			  WKUP_MOD, PM_WKEN);
+	/* No need to write EN_IO, that is always enabled */
+	prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
+			  OMAP3430_EN_GPT12,
+			  WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+	/* For some reason IO doesn't generate wakeup event even if
+	 * it is selected to mpu wakeup goup */
+	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+	/* Don't attach IVA interrupts */
+	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+	/* Clear any pending 'reset' flags */
+	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+	/* Clear any pending PRCM interrupts */
+	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	omap3_iva_idle();
+	omap3_d2d_idle();
+}
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm)
+{
+	struct power_state *pwrst;
+
+	if (!pwrdm->pwrsts)
+		return 0;
+
+	pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+	if (!pwrst)
+		return -ENOMEM;
+	pwrst->pwrdm = pwrdm;
+	pwrst->next_state = PWRDM_POWER_RET;
+	list_add(&pwrst->node, &pwrst_list);
+
+	if (pwrdm_has_hdwr_sar(pwrdm))
+		pwrdm_enable_hdwr_sar(pwrdm);
+
+	return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+}
+
+/*
+ * Enable hw supervised mode for all clockdomains if it's
+ * supported. Initiate sleep transition for other clockdomains, if
+ * they are not used
+ */
+static int __init clkdms_setup(struct clockdomain *clkdm)
+{
+	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+		omap2_clkdm_allow_idle(clkdm);
+	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+		 atomic_read(&clkdm->usecount) == 0)
+		omap2_clkdm_sleep(clkdm);
+	return 0;
+}
+
+int __init omap3_pm_init(void)
+{
+	struct power_state *pwrst, *tmp;
+	int ret;
+
+	if (!cpu_is_omap34xx())
+		return -ENODEV;
+
+	printk(KERN_ERR "Power Management for TI OMAP3.\n");
+
+	/* XXX prcm_setup_regs needs to be before enabling hw
+	 * supervised mode for powerdomains */
+	prcm_setup_regs();
+
+	ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
+			  (irq_handler_t)prcm_interrupt_handler,
+			  IRQF_DISABLED, "prcm", NULL);
+	if (ret) {
+		printk(KERN_ERR "request_irq failed to register for 0x%x\n",
+		       INT_34XX_PRCM_MPU_IRQ);
+		goto err1;
+	}
+
+	ret = pwrdm_for_each(pwrdms_setup);
+	if (ret) {
+		printk(KERN_ERR "Failed to setup powerdomains\n");
+		goto err2;
+	}
+
+	(void) clkdm_for_each(clkdms_setup);
+
+	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+	if (mpu_pwrdm == NULL) {
+		printk(KERN_ERR "Failed to get mpu_pwrdm\n");
+		goto err2;
+	}
+
+	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+					 omap34xx_cpu_suspend_sz);
+
+	suspend_set_ops(&omap_pm_ops);
+
+	pm_idle = omap3_pm_idle;
+
+err1:
+	return ret;
+err2:
+	free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+	list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
+		list_del(&pwrst->node);
+		kfree(pwrst);
+	}
+	return ret;
+}
+
+late_initcall(omap3_pm_init);
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 812d50ee495..cb1ae84e092 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -276,6 +276,8 @@
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
 #define OMAP3430_EN_GPIO1				(1 << 3)
 #define OMAP3430_EN_GPIO1_SHIFT				3
+#define OMAP3430_EN_GPT12				(1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT				1
 #define OMAP3430_EN_GPT1				(1 << 0)
 #define OMAP3430_EN_GPT1_SHIFT				0
 
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 826d326b806..9937e281469 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -16,17 +16,12 @@
 
 #include "prcm-common.h"
 
-#ifndef __ASSEMBLER__
-#define OMAP_PRM_REGADDR(module, reg)					\
-			IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
-#else
 #define OMAP2420_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-#endif
 
 /*
  * Architecture-specific global PRM registers
@@ -38,80 +33,132 @@
  *
  */
 
-/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
-#define OMAP24XX_PRCM_VOLTCTRL_OFFSET		0x0050
-#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET	0x0080
-
-/* 242x GR_MOD registers, use these only for assembly code */
-#define OMAP242X_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP242X_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* 243x GR_MOD registers, use these only for assembly code */
-#define OMAP243X_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP243X_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* These will disappear */
-#define OMAP24XX_PRCM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP24XX_PRCM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP24XX_PRCM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP24XX_PRCM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP24XX_PRCM_VOLTST		OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP24XX_PRCM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP24XX_PRCM_CLKCFG_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP24XX_PRCM_CLKCFG_STATUS	OMAP_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP24XX_PRCM_VOLTSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP24XX_PRCM_CLKSSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP24XX_PRCM_POLCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP3430_PRM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3430_PRM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3430_PRM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3430_PRM_VC_SMPS_SA		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3430_PRM_VC_CH_CONF		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3430_PRM_VC_I2C_CFG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3430_PRM_RSTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3430_PRM_RSTTIME		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3430_PRM_RSTST		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3430_PRM_VOLTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3430_PRM_SRAM_PCHARGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3430_PRM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3430_PRM_VOLTSETUP1		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3430_PRM_VOLTOFFSET		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3430_PRM_CLKSETUP		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3430_PRM_POLCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3430_PRM_VOLTSETUP2		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3430_PRM_VP1_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3430_PRM_VP1_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3430_PRM_VP1_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3430_PRM_VP1_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3430_PRM_VP2_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3430_PRM_VP2_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3430_PRM_VP2_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3430_PRM_VP2_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3430_PRM_CLKSEL		OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3430_PRM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+#define OMAP2_PRCM_REVISION_OFFSET	0x0000
+#define OMAP2420_PRCM_REVISION		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET	0x0010
+#define OMAP2420_PRCM_SYSCONFIG		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET	0x0050
+#define OMAP2420_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET	0x0054
+#define OMAP2420_PRCM_VOLTST		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET	0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET	0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET	0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET	0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET	0x0090
+#define OMAP2420_PRCM_VOLTSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET	0x0094
+#define OMAP2420_PRCM_CLKSSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET	0x0098
+#define OMAP2420_PRCM_POLCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP3_PRM_REVISION_OFFSET	0x0004
+#define OMAP3430_PRM_REVISION		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET	0x0014
+#define OMAP3430_PRM_SYSCONFIG		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET	0x0020
+#define OMAP3430_PRM_VC_SMPS_SA		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET	0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET	0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET	0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET	0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET	0x0034
+#define OMAP3430_PRM_VC_CH_CONF		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET	0x0038
+#define OMAP3430_PRM_VC_I2C_CFG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET	0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET	0x0050
+#define OMAP3430_PRM_RSTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET	0x0054
+#define OMAP3430_PRM_RSTTIME		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET	0x0058
+#define OMAP3430_PRM_RSTST		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET	0x0060
+#define OMAP3430_PRM_VOLTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET	0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET	0x0090
+#define OMAP3430_PRM_VOLTSETUP1		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET	0x0094
+#define OMAP3430_PRM_VOLTOFFSET		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET	0x0098
+#define OMAP3430_PRM_CLKSETUP		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET	0x009c
+#define OMAP3430_PRM_POLCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET	0x00a0
+#define OMAP3430_PRM_VOLTSETUP2		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET	0x00b0
+#define OMAP3430_PRM_VP1_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET	0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET	0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET	0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET	0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET	0x00c4
+#define OMAP3430_PRM_VP1_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET	0x00d0
+#define OMAP3430_PRM_VP2_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET	0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET	0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET	0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET	0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET	0x00e4
+#define OMAP3430_PRM_VP2_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET	0x0040
+#define OMAP3430_PRM_CLKSEL		OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
 
 /*
  * Module specific PRM registers from PRM_BASE + domain offset
@@ -156,9 +203,11 @@
 
 #define OMAP3430_PM_MPUGRPSEL				0x00a4
 #define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3			0x00f8
 
 #define OMAP3430_PM_IVAGRPSEL				0x00a8
 #define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3			0x00f4
 
 #define OMAP3430_PM_PREPWSTST				0x00e8
 
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
new file mode 100644
index 00000000000..02e1c2d4705
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -0,0 +1,55 @@
+/*
+ * SDRC register values for the Micron MT46H32M32LF-6
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+
+#include <mach/sdrc.h>
+
+/* Micron MT46H32M32LF-6 */
+/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
+static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[3] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[4] = {
+		.rate	     = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
new file mode 100644
index 00000000000..3751d293cb1
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -0,0 +1,54 @@
+/*
+ * SDRC register values for the Qimonda HYB18M512160AF-6
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+
+#include <mach/sdrc.h>
+
+/* Qimonda HYB18M512160AF-6 */
+static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000022,
+	},
+	[3] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000022,
+	},
+	[4] = {
+		.rate	     = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2a30060cb4b..2045441e838 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -37,6 +37,10 @@ static struct omap_sdrc_params *sdrc_init_params;
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
 
+/* SDRC_POWER register bits */
+#define SDRC_POWER_EXTCLKDIS_SHIFT		3
+#define SDRC_POWER_PWDENA_SHIFT			2
+#define SDRC_POWER_PAGEPOLICY_SHIFT		0
 
 /**
  * omap2_sdrc_get_params - return SDRC register values for a given clock rate
@@ -56,9 +60,12 @@ struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
 {
 	struct omap_sdrc_params *sp;
 
+	if (!sdrc_init_params)
+		return NULL;
+
 	sp = sdrc_init_params;
 
-	while (sp->rate != r)
+	while (sp->rate && sp->rate != r)
 		sp++;
 
 	if (!sp->rate)
@@ -74,7 +81,14 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
 	omap2_sms_base = omap2_globals->sms;
 }
 
-/* turn on smart idle modes for SDRAM scheduler and controller */
+/**
+ * omap2_sdrc_init - initialize SMS, SDRC devices on boot
+ * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ *
+ * Turn on smart idle modes for SDRAM scheduler and controller.
+ * Program a known-good configuration for the SDRC to deal with buggy
+ * bootloaders.
+ */
 void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 {
 	u32 l;
@@ -90,4 +104,10 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 	sdrc_write_reg(l, SDRC_SYSCONFIG);
 
 	sdrc_init_params = sp;
+
+	/* XXX Enable SRFRONIDLEREQ here also? */
+	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
+		(1 << SDRC_POWER_PWDENA_SHIFT) |
+		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
+	sdrc_write_reg(l, SDRC_POWER);
 }
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 0afdad5ae9f..feaec7eaf6b 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -99,7 +99,10 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
 	m_type = omap2xxx_sdrc_get_type();
 
 	local_irq_save(flags);
-	__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+	if (cpu_is_omap2420())
+		__raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
+	else
+		__raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP);
 	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
 	curr_perf_level = level;
 	local_irq_restore(flags);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 4dcf39c285b..b094c15bfe4 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -6,8 +6,13 @@
  * Copyright (C) 2005-2008 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *
+ * Major rework for PM support by Kevin Hilman
+ *
  * Based off of arch/arm/mach-omap/omap1/serial.c
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
+ *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -21,9 +26,50 @@
 
 #include <mach/common.h>
 #include <mach/board.h>
+#include <mach/clock.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "pm.h"
+#include "prm-regbits-34xx.h"
+
+#define UART_OMAP_WER		0x17	/* Wake-up enable register */
+
+#define DEFAULT_TIMEOUT (5 * HZ)
 
-static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
-static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
+struct omap_uart_state {
+	int num;
+	int can_sleep;
+	struct timer_list timer;
+	u32 timeout;
+
+	void __iomem *wk_st;
+	void __iomem *wk_en;
+	u32 wk_mask;
+	u32 padconf;
+
+	struct clk *ick;
+	struct clk *fck;
+	int clocked;
+
+	struct plat_serial8250_port *p;
+	struct list_head node;
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+	int context_valid;
+
+	/* Registers to be saved/restored for OFF-mode */
+	u16 dll;
+	u16 dlh;
+	u16 ier;
+	u16 sysc;
+	u16 scr;
+	u16 wer;
+#endif
+};
+
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
+static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
@@ -74,33 +120,369 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
  * properly. Note that the TX watermark initialization may not be needed
  * once the 8250.c watermark handling code is merged.
  */
-static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 {
+	struct plat_serial8250_port *p = uart->p;
+
 	serial_write_reg(p, UART_OMAP_MDR1, 0x07);
 	serial_write_reg(p, UART_OMAP_SCR, 0x08);
 	serial_write_reg(p, UART_OMAP_MDR1, 0x00);
 	serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
 }
 
-void omap_serial_enable_clocks(int enable)
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+
+static int enable_off_mode; /* to be removed by full off-mode patches */
+
+static void omap_uart_save_context(struct omap_uart_state *uart)
 {
-	int i;
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		if (uart_ick[i] && uart_fck[i]) {
-			if (enable) {
-				clk_enable(uart_ick[i]);
-				clk_enable(uart_fck[i]);
-			} else {
-				clk_disable(uart_ick[i]);
-				clk_disable(uart_fck[i]);
+	u16 lcr = 0;
+	struct plat_serial8250_port *p = uart->p;
+
+	if (!enable_off_mode)
+		return;
+
+	lcr = serial_read_reg(p, UART_LCR);
+	serial_write_reg(p, UART_LCR, 0xBF);
+	uart->dll = serial_read_reg(p, UART_DLL);
+	uart->dlh = serial_read_reg(p, UART_DLM);
+	serial_write_reg(p, UART_LCR, lcr);
+	uart->ier = serial_read_reg(p, UART_IER);
+	uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
+	uart->scr = serial_read_reg(p, UART_OMAP_SCR);
+	uart->wer = serial_read_reg(p, UART_OMAP_WER);
+
+	uart->context_valid = 1;
+}
+
+static void omap_uart_restore_context(struct omap_uart_state *uart)
+{
+	u16 efr = 0;
+	struct plat_serial8250_port *p = uart->p;
+
+	if (!enable_off_mode)
+		return;
+
+	if (!uart->context_valid)
+		return;
+
+	uart->context_valid = 0;
+
+	serial_write_reg(p, UART_OMAP_MDR1, 0x7);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	efr = serial_read_reg(p, UART_EFR);
+	serial_write_reg(p, UART_EFR, UART_EFR_ECB);
+	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(p, UART_IER, 0x0);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(p, UART_DLL, uart->dll);
+	serial_write_reg(p, UART_DLM, uart->dlh);
+	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(p, UART_IER, uart->ier);
+	serial_write_reg(p, UART_FCR, 0xA1);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(p, UART_EFR, efr);
+	serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
+	serial_write_reg(p, UART_OMAP_SCR, uart->scr);
+	serial_write_reg(p, UART_OMAP_WER, uart->wer);
+	serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
+	serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+}
+#else
+static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
+static inline void omap_uart_restore_context(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */
+
+static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
+{
+	if (uart->clocked)
+		return;
+
+	clk_enable(uart->ick);
+	clk_enable(uart->fck);
+	uart->clocked = 1;
+	omap_uart_restore_context(uart);
+}
+
+#ifdef CONFIG_PM
+
+static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
+{
+	if (!uart->clocked)
+		return;
+
+	omap_uart_save_context(uart);
+	uart->clocked = 0;
+	clk_disable(uart->ick);
+	clk_disable(uart->fck);
+}
+
+static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
+					  int enable)
+{
+	struct plat_serial8250_port *p = uart->p;
+	u16 sysc;
+
+	sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
+	if (enable)
+		sysc |= 0x2 << 3;
+	else
+		sysc |= 0x1 << 3;
+
+	serial_write_reg(p, UART_OMAP_SYSC, sysc);
+}
+
+static void omap_uart_block_sleep(struct omap_uart_state *uart)
+{
+	omap_uart_enable_clocks(uart);
+
+	omap_uart_smart_idle_enable(uart, 0);
+	uart->can_sleep = 0;
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
+	else
+		del_timer(&uart->timer);
+}
+
+static void omap_uart_allow_sleep(struct omap_uart_state *uart)
+{
+	if (!uart->clocked)
+		return;
+
+	omap_uart_smart_idle_enable(uart, 1);
+	uart->can_sleep = 1;
+	del_timer(&uart->timer);
+}
+
+static void omap_uart_idle_timer(unsigned long data)
+{
+	struct omap_uart_state *uart = (struct omap_uart_state *)data;
+
+	omap_uart_allow_sleep(uart);
+}
+
+void omap_uart_prepare_idle(int num)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (num == uart->num && uart->can_sleep) {
+			omap_uart_disable_clocks(uart);
+			return;
+		}
+	}
+}
+
+void omap_uart_resume_idle(int num)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (num == uart->num) {
+			omap_uart_enable_clocks(uart);
+
+			/* Check for IO pad wakeup */
+			if (cpu_is_omap34xx() && uart->padconf) {
+				u16 p = omap_ctrl_readw(uart->padconf);
+
+				if (p & OMAP3_PADCONF_WAKEUPEVENT0)
+					omap_uart_block_sleep(uart);
 			}
+
+			/* Check for normal UART wakeup */
+			if (__raw_readl(uart->wk_st) & uart->wk_mask)
+				omap_uart_block_sleep(uart);
+
+			return;
 		}
 	}
 }
 
+void omap_uart_prepare_suspend(void)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		omap_uart_allow_sleep(uart);
+	}
+}
+
+int omap_uart_can_sleep(void)
+{
+	struct omap_uart_state *uart;
+	int can_sleep = 1;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (!uart->clocked)
+			continue;
+
+		if (!uart->can_sleep) {
+			can_sleep = 0;
+			continue;
+		}
+
+		/* This UART can now safely sleep. */
+		omap_uart_allow_sleep(uart);
+	}
+
+	return can_sleep;
+}
+
+/**
+ * omap_uart_interrupt()
+ *
+ * This handler is used only to detect that *any* UART interrupt has
+ * occurred.  It does _nothing_ to handle the interrupt.  Rather,
+ * any UART interrupt will trigger the inactivity timer so the
+ * UART will not idle or sleep for its timeout period.
+ *
+ **/
+static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
+{
+	struct omap_uart_state *uart = dev_id;
+
+	omap_uart_block_sleep(uart);
+
+	return IRQ_NONE;
+}
+
+static u32 sleep_timeout = DEFAULT_TIMEOUT;
+
+static void omap_uart_idle_init(struct omap_uart_state *uart)
+{
+	u32 v;
+	struct plat_serial8250_port *p = uart->p;
+	int ret;
+
+	uart->can_sleep = 0;
+	uart->timeout = sleep_timeout;
+	setup_timer(&uart->timer, omap_uart_idle_timer,
+		    (unsigned long) uart);
+	mod_timer(&uart->timer, jiffies + uart->timeout);
+	omap_uart_smart_idle_enable(uart, 0);
+
+	if (cpu_is_omap34xx()) {
+		u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
+		u32 wk_mask = 0;
+		u32 padconf = 0;
+
+		uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
+		uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
+		switch (uart->num) {
+		case 0:
+			wk_mask = OMAP3430_ST_UART1_MASK;
+			padconf = 0x182;
+			break;
+		case 1:
+			wk_mask = OMAP3430_ST_UART2_MASK;
+			padconf = 0x17a;
+			break;
+		case 2:
+			wk_mask = OMAP3430_ST_UART3_MASK;
+			padconf = 0x19e;
+			break;
+		}
+		uart->wk_mask = wk_mask;
+		uart->padconf = padconf;
+	} else if (cpu_is_omap24xx()) {
+		u32 wk_mask = 0;
+
+		if (cpu_is_omap2430()) {
+			uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+			uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1);
+		} else if (cpu_is_omap2420()) {
+			uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+			uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1);
+		}
+		switch (uart->num) {
+		case 0:
+			wk_mask = OMAP24XX_ST_UART1_MASK;
+			break;
+		case 1:
+			wk_mask = OMAP24XX_ST_UART2_MASK;
+			break;
+		case 2:
+			wk_mask = OMAP24XX_ST_UART3_MASK;
+			break;
+		}
+		uart->wk_mask = wk_mask;
+	} else {
+		uart->wk_en = 0;
+		uart->wk_st = 0;
+		uart->wk_mask = 0;
+		uart->padconf = 0;
+	}
+
+	/* Set wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		v = __raw_readl(uart->wk_en);
+		v |= uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are set */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v;
+
+		v = omap_ctrl_readw(uart->padconf);
+		v |= OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+
+	p->flags |= UPF_SHARE_IRQ;
+	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
+			  "serial idle", (void *)uart);
+	WARN_ON(ret);
+}
+
+static ssize_t sleep_timeout_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	return sprintf(buf, "%u\n", sleep_timeout / HZ);
+}
+
+static ssize_t sleep_timeout_store(struct kobject *kobj,
+				   struct kobj_attribute *attr,
+				   const char *buf, size_t n)
+{
+	struct omap_uart_state *uart;
+	unsigned int value;
+
+	if (sscanf(buf, "%u", &value) != 1) {
+		printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+		return -EINVAL;
+	}
+	sleep_timeout = value * HZ;
+	list_for_each_entry(uart, &uart_list, node) {
+		uart->timeout = sleep_timeout;
+		if (uart->timeout)
+			mod_timer(&uart->timer, jiffies + uart->timeout);
+		else
+			/* A zero value means disable timeout feature */
+			omap_uart_block_sleep(uart);
+	}
+	return n;
+}
+
+static struct kobj_attribute sleep_timeout_attr =
+	__ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+
+#else
+static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM */
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
 void __init omap_serial_init(void)
 {
-	int i;
+	int i, err;
 	const struct omap_uart_config *info;
 	char name[16];
 
@@ -114,9 +496,14 @@ void __init omap_serial_init(void)
 
 	if (info == NULL)
 		return;
+	if (cpu_is_omap44xx()) {
+		for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
+			serial_platform_data[i].irq += 32;
+	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		struct plat_serial8250_port *p = serial_platform_data + i;
+		struct omap_uart_state *uart = &omap_uart[i];
 
 		if (!(info->enabled_uarts & (1 << i))) {
 			p->membase = NULL;
@@ -125,35 +512,39 @@ void __init omap_serial_init(void)
 		}
 
 		sprintf(name, "uart%d_ick", i+1);
-		uart_ick[i] = clk_get(NULL, name);
-		if (IS_ERR(uart_ick[i])) {
+		uart->ick = clk_get(NULL, name);
+		if (IS_ERR(uart->ick)) {
 			printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
-			uart_ick[i] = NULL;
-		} else
-			clk_enable(uart_ick[i]);
+			uart->ick = NULL;
+		}
 
 		sprintf(name, "uart%d_fck", i+1);
-		uart_fck[i] = clk_get(NULL, name);
-		if (IS_ERR(uart_fck[i])) {
+		uart->fck = clk_get(NULL, name);
+		if (IS_ERR(uart->fck)) {
 			printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
-			uart_fck[i] = NULL;
-		} else
-			clk_enable(uart_fck[i]);
+			uart->fck = NULL;
+		}
 
-		omap_serial_reset(p);
+		if (!uart->ick || !uart->fck)
+			continue;
+
+		uart->num = i;
+		p->private_data = uart;
+		uart->p = p;
+		list_add(&uart->node, &uart_list);
+
+		omap_uart_enable_clocks(uart);
+		omap_uart_reset(uart);
+		omap_uart_idle_init(uart);
 	}
-}
 
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
+	err = platform_device_register(&serial_device);
+
+#ifdef CONFIG_PM
+	if (!err)
+		err = sysfs_create_file(&serial_device.dev.kobj,
+					&sleep_timeout_attr.attr);
+#endif
 
-static int __init omap_init(void)
-{
-	return platform_device_register(&serial_device);
 }
-arch_initcall(omap_init);
+
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index bf9e96105e1..130aadbfa08 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -28,7 +28,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/pm.h>
 
 #include <mach/omap24xx.h>
 
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
new file mode 100644
index 00000000000..e5e2553e79a
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -0,0 +1,436 @@
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2007
+ * Texas Instruments
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/io.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "sdrc.h"
+
+#define PM_PREPWSTST_CORE_V	OMAP34XX_PRM_REGADDR(CORE_MOD, \
+				OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_MPU_V	OMAP34XX_PRM_REGADDR(MPU_MOD, \
+				OMAP3430_PM_PREPWSTST)
+#define PM_PWSTCTRL_MPU_P	OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define SCRATCHPAD_MEM_OFFS	0x310 /* Move this as correct place is
+				       * available */
+#define SCRATCHPAD_BASE_P	OMAP343X_CTRL_REGADDR(\
+				OMAP343X_CONTROL_MEM_WKUP +\
+				SCRATCHPAD_MEM_OFFS)
+#define SDRC_POWER_V		OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+
+	.text
+/* Function call to get the restore pointer for resume from OFF */
+ENTRY(get_restore_pointer)
+        stmfd   sp!, {lr}     @ save registers on stack
+	adr	r0, restore
+        ldmfd   sp!, {pc}     @ restore regs and return
+ENTRY(get_restore_pointer_sz)
+        .word   . - get_restore_pointer_sz
+/*
+ * Forces OMAP into idle state
+ *
+ * omap34xx_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ *	 wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap34xx_cpu_suspend)
+	stmfd	sp!, {r0-r12, lr}		@ save registers on stack
+loop:
+	/*b	loop*/	@Enable to debug by stepping through code
+	/* r0 contains restore pointer in sdram */
+	/* r1 contains information about saving context */
+	ldr     r4, sdrc_power          @ read the SDRC_POWER register
+	ldr     r5, [r4]                @ read the contents of SDRC_POWER
+	orr     r5, r5, #0x40           @ enable self refresh on idle req
+	str     r5, [r4]                @ write back to SDRC_POWER register
+
+	cmp	r1, #0x0
+	/* If context save is required, do that and execute wfi */
+	bne	save_context_wfi
+	/* Data memory barrier and Data sync barrier */
+	mov	r1, #0
+	mcr	p15, 0, r1, c7, c10, 4
+	mcr	p15, 0, r1, c7, c10, 5
+
+	wfi				@ wait for interrupt
+
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bl i_dll_wait
+
+	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+restore:
+	/* b restore*/ 	@ Enable to debug restore code
+        /* Check what was the reason for mpu reset and store the reason in r9*/
+        /* 1 - Only L1 and logic lost */
+        /* 2 - Only L2 lost - In this case, we wont be here */
+        /* 3 - Both L1 and L2 lost */
+	ldr     r1, pm_pwstctrl_mpu
+	ldr	r2, [r1]
+	and     r2, r2, #0x3
+	cmp     r2, #0x0	@ Check if target power state was OFF or RET
+        moveq   r9, #0x3        @ MPU OFF => L1 and L2 lost
+	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
+	bne	logic_l1_restore
+	/* Execute smi to invalidate L2 cache */
+	mov r12, #0x1                         @ set up to invalide L2
+smi:    .word 0xE1600070                @ Call SMI monitor (smieq)
+logic_l1_restore:
+	mov	r1, #0
+	/* Invalidate all instruction caches to PoU
+	 * and flush branch target cache */
+	mcr	p15, 0, r1, c7, c5, 0
+
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4,#0xBC]
+	ldmia	r3!, {r4-r6}
+	mov	sp, r4
+	msr	spsr_cxsf, r5
+	mov	lr, r6
+
+	ldmia	r3!, {r4-r9}
+	/* Coprocessor access Control Register */
+	mcr p15, 0, r4, c1, c0, 2
+
+	/* TTBR0 */
+	MCR p15, 0, r5, c2, c0, 0
+	/* TTBR1 */
+	MCR p15, 0, r6, c2, c0, 1
+	/* Translation table base control register */
+	MCR p15, 0, r7, c2, c0, 2
+	/*domain access Control Register */
+	MCR p15, 0, r8, c3, c0, 0
+	/* data fault status Register */
+	MCR p15, 0, r9, c5, c0, 0
+
+	ldmia  r3!,{r4-r8}
+	/* instruction fault status Register */
+	MCR p15, 0, r4, c5, c0, 1
+	/*Data Auxiliary Fault Status Register */
+	MCR p15, 0, r5, c5, c1, 0
+	/*Instruction Auxiliary Fault Status Register*/
+	MCR p15, 0, r6, c5, c1, 1
+	/*Data Fault Address Register */
+	MCR p15, 0, r7, c6, c0, 0
+	/*Instruction Fault Address Register*/
+	MCR p15, 0, r8, c6, c0, 2
+	ldmia  r3!,{r4-r7}
+
+	/* user r/w thread and process ID */
+	MCR p15, 0, r4, c13, c0, 2
+	/* user ro thread and process ID */
+	MCR p15, 0, r5, c13, c0, 3
+	/*Privileged only thread and process ID */
+	MCR p15, 0, r6, c13, c0, 4
+	/* cache size selection */
+	MCR p15, 2, r7, c0, c0, 0
+	ldmia  r3!,{r4-r8}
+	/* Data TLB lockdown registers */
+	MCR p15, 0, r4, c10, c0, 0
+	/* Instruction TLB lockdown registers */
+	MCR p15, 0, r5, c10, c0, 1
+	/* Secure or Nonsecure Vector Base Address */
+	MCR p15, 0, r6, c12, c0, 0
+	/* FCSE PID */
+	MCR p15, 0, r7, c13, c0, 0
+	/* Context PID */
+	MCR p15, 0, r8, c13, c0, 1
+
+	ldmia  r3!,{r4-r5}
+	/* primary memory remap register */
+	MCR p15, 0, r4, c10, c2, 0
+	/*normal memory remap register */
+	MCR p15, 0, r5, c10, c2, 1
+
+	/* Restore cpsr */
+	ldmia	r3!,{r4}	/*load CPSR from SDRAM*/
+	msr	cpsr, r4	/*store cpsr */
+
+	/* Enabling MMU here */
+	mrc	p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
+	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+	and	r7, #0x7
+	cmp	r7, #0x0
+	beq	usettbr0
+ttbr_error:
+	/* More work needs to be done to support N[0:2] value other than 0
+	* So looping here so that the error can be detected
+	*/
+	b	ttbr_error
+usettbr0:
+	mrc	p15, 0, r2, c2, c0, 0
+	ldr	r5, ttbrbit_mask
+	and	r2, r5
+	mov	r4, pc
+	ldr	r5, table_index_mask
+	and	r4, r5 /* r4 = 31 to 20 bits of pc */
+	/* Extract the value to be written to table entry */
+	ldr	r1, table_entry
+	add	r1, r1, r4 /* r1 has value to be written to table entry*/
+	/* Getting the address of table entry to modify */
+	lsr	r4, #18
+	add	r2, r4 /* r2 has the location which needs to be modified */
+	/* Storing previous entry of location being modified */
+	ldr	r5, scratchpad_base
+	ldr	r4, [r2]
+	str	r4, [r5, #0xC0]
+	/* Modify the table entry */
+	str	r1, [r2]
+	/* Storing address of entry being modified
+	 * - will be restored after enabling MMU */
+	ldr	r5, scratchpad_base
+	str	r2, [r5, #0xC4]
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 4	@ Flush prefetch buffer
+	mcr	p15, 0, r0, c7, c5, 6	@ Invalidate branch predictor array
+	mcr	p15, 0, r0, c8, c5, 0	@ Invalidate instruction TLB
+	mcr	p15, 0, r0, c8, c6, 0	@ Invalidate data TLB
+	/* Restore control register  but dont enable caches here*/
+	/* Caches will be enabled after restoring MMU table entry */
+	ldmia	r3!, {r4}
+	/* Store previous value of control register in scratchpad */
+	str	r4, [r5, #0xC8]
+	ldr	r2, cache_pred_disable_mask
+	and	r4, r2
+	mcr	p15, 0, r4, c1, c0, 0
+
+	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+save_context_wfi:
+	/*b	save_context_wfi*/	@ enable to debug save code
+	mov	r8, r0 /* Store SDRAM address in r8 */
+        /* Check what that target sleep state is:stored in r1*/
+        /* 1 - Only L1 and logic lost */
+        /* 2 - Only L2 lost */
+        /* 3 - Both L1 and L2 lost */
+	cmp	r1, #0x2 /* Only L2 lost */
+	beq	clean_l2
+	cmp	r1, #0x1 /* L2 retained */
+	/* r9 stores whether to clean L2 or not*/
+	moveq	r9, #0x0 /* Dont Clean L2 */
+	movne	r9, #0x1 /* Clean L2 */
+l1_logic_lost:
+	/* Store sp and spsr to SDRAM */
+	mov	r4, sp
+	mrs	r5, spsr
+	mov	r6, lr
+	stmia	r8!, {r4-r6}
+	/* Save all ARM registers */
+	/* Coprocessor access control register */
+	mrc	p15, 0, r6, c1, c0, 2
+	stmia	r8!, {r6}
+	/* TTBR0, TTBR1 and Translation table base control */
+	mrc	p15, 0, r4, c2, c0, 0
+	mrc	p15, 0, r5, c2, c0, 1
+	mrc	p15, 0, r6, c2, c0, 2
+	stmia	r8!, {r4-r6}
+	/* Domain access control register, data fault status register,
+	and instruction fault status register */
+	mrc	p15, 0, r4, c3, c0, 0
+	mrc	p15, 0, r5, c5, c0, 0
+	mrc	p15, 0, r6, c5, c0, 1
+	stmia	r8!, {r4-r6}
+	/* Data aux fault status register, instruction aux fault status,
+	datat fault address register and instruction fault address register*/
+	mrc	p15, 0, r4, c5, c1, 0
+	mrc	p15, 0, r5, c5, c1, 1
+	mrc	p15, 0, r6, c6, c0, 0
+	mrc	p15, 0, r7, c6, c0, 2
+	stmia	r8!, {r4-r7}
+	/* user r/w thread and process ID, user r/o thread and process ID,
+	priv only thread and process ID, cache size selection */
+	mrc	p15, 0, r4, c13, c0, 2
+	mrc	p15, 0, r5, c13, c0, 3
+	mrc	p15, 0, r6, c13, c0, 4
+	mrc	p15, 2, r7, c0, c0, 0
+	stmia	r8!, {r4-r7}
+	/* Data TLB lockdown, instruction TLB lockdown registers */
+	mrc	p15, 0, r5, c10, c0, 0
+	mrc	p15, 0, r6, c10, c0, 1
+	stmia	r8!, {r5-r6}
+	/* Secure or non secure vector base address, FCSE PID, Context PID*/
+	mrc	p15, 0, r4, c12, c0, 0
+	mrc	p15, 0, r5, c13, c0, 0
+	mrc	p15, 0, r6, c13, c0, 1
+	stmia	r8!, {r4-r6}
+	/* Primary remap, normal remap registers */
+	mrc	p15, 0, r4, c10, c2, 0
+	mrc	p15, 0, r5, c10, c2, 1
+	stmia	r8!,{r4-r5}
+
+	/* Store current cpsr*/
+	mrs	r2, cpsr
+	stmia	r8!, {r2}
+
+	mrc	p15, 0, r4, c1, c0, 0
+	/* save control register */
+	stmia	r8!, {r4}
+clean_caches:
+	/* Clean Data or unified cache to POU*/
+	/* How to invalidate only L1 cache???? - #FIX_ME# */
+	/* mcr	p15, 0, r11, c7, c11, 1 */
+	cmp	r9, #1 /* Check whether L2 inval is required or not*/
+	bne	skip_l2_inval
+clean_l2:
+	/* read clidr */
+	mrc     p15, 1, r0, c0, c0, 1
+	/* extract loc from clidr */
+	ands    r3, r0, #0x7000000
+	/* left align loc bit field */
+	mov     r3, r3, lsr #23
+	/* if loc is 0, then no need to clean */
+	beq     finished
+	/* start clean at cache level 0 */
+	mov     r10, #0
+loop1:
+	/* work out 3x current cache level */
+	add     r2, r10, r10, lsr #1
+	/* extract cache type bits from clidr*/
+	mov     r1, r0, lsr r2
+	/* mask of the bits for current cache only */
+	and     r1, r1, #7
+	/* see what cache we have at this level */
+	cmp     r1, #2
+	/* skip if no cache, or just i-cache */
+	blt     skip
+	/* select current cache level in cssr */
+	mcr     p15, 2, r10, c0, c0, 0
+	/* isb to sych the new cssr&csidr */
+	isb
+	/* read the new csidr */
+	mrc     p15, 1, r1, c0, c0, 0
+	/* extract the length of the cache lines */
+	and     r2, r1, #7
+	/* add 4 (line length offset) */
+	add     r2, r2, #4
+	ldr     r4, assoc_mask
+	/* find maximum number on the way size */
+	ands    r4, r4, r1, lsr #3
+	/* find bit position of way size increment */
+	clz     r5, r4
+	ldr     r7, numset_mask
+	/* extract max number of the index size*/
+	ands    r7, r7, r1, lsr #13
+loop2:
+	mov     r9, r4
+	/* create working copy of max way size*/
+loop3:
+	/* factor way and cache number into r11 */
+	orr     r11, r10, r9, lsl r5
+	/* factor index number into r11 */
+	orr     r11, r11, r7, lsl r2
+	/*clean & invalidate by set/way */
+	mcr     p15, 0, r11, c7, c10, 2
+	/* decrement the way*/
+	subs    r9, r9, #1
+	bge     loop3
+	/*decrement the index */
+	subs    r7, r7, #1
+	bge     loop2
+skip:
+	add     r10, r10, #2
+	/* increment cache number */
+	cmp     r3, r10
+	bgt     loop1
+finished:
+	/*swith back to cache level 0 */
+	mov     r10, #0
+	/* select current cache level in cssr */
+	mcr     p15, 2, r10, c0, c0, 0
+	isb
+skip_l2_inval:
+	/* Data memory barrier and Data sync barrier */
+	mov     r1, #0
+	mcr     p15, 0, r1, c7, c10, 4
+	mcr     p15, 0, r1, c7, c10, 5
+
+	wfi                             @ wait for interrupt
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bl i_dll_wait
+	/* restore regs and return */
+	ldmfd   sp!, {r0-r12, pc}
+
+i_dll_wait:
+	ldr     r4, clk_stabilize_delay
+
+i_dll_delay:
+	subs    r4, r4, #0x1
+	bne     i_dll_delay
+	ldr     r4, sdrc_power
+	ldr     r5, [r4]
+	bic     r5, r5, #0x40
+	str     r5, [r4]
+	bx	lr
+pm_prepwstst_core:
+	.word	PM_PREPWSTST_CORE_V
+pm_prepwstst_mpu:
+	.word	PM_PREPWSTST_MPU_V
+pm_pwstctrl_mpu:
+	.word	PM_PWSTCTRL_MPU_P
+scratchpad_base:
+	.word	SCRATCHPAD_BASE_P
+sdrc_power:
+	.word SDRC_POWER_V
+context_mem:
+	.word	0x803E3E14
+clk_stabilize_delay:
+	.word 0x000001FF
+assoc_mask:
+	.word	0x3ff
+numset_mask:
+	.word	0x7fff
+ttbrbit_mask:
+	.word	0xFFFFC000
+table_index_mask:
+	.word	0xFFF00000
+table_entry:
+	.word	0x00000C02
+cache_pred_disable_mask:
+	.word	0xFFFFE7FB
+ENTRY(omap34xx_cpu_suspend_sz)
+	.word	. - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index af4bd349022..bb299851116 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -124,11 +124,11 @@ omap242x_sdi_cm_clksel2_pll:
 omap242x_sdi_sdrc_dlla_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 omap242x_sdi_prcm_voltctrl:
-	.word OMAP242X_PRCM_VOLTCTRL
+	.word OMAP2420_PRCM_VOLTCTRL
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
 	.word	. - omap242x_sram_ddr_init
 
@@ -220,11 +220,11 @@ omap242x_srs_sdrc_dlla_ctrl:
 omap242x_srs_sdrc_rfr_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 omap242x_srs_prcm_voltctrl:
-	.word OMAP242X_PRCM_VOLTCTRL
+	.word OMAP2420_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
 	.word	. - omap242x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 omap242x_ssp_set_config:
-	.word OMAP242X_PRCM_CLKCFG_CTRL
+	.word OMAP2420_PRCM_CLKCFG_CTRL
 omap242x_ssp_pll_ctl:
 	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
 omap242x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 84363e269e8..9955abcaeb3 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -124,11 +124,11 @@ omap243x_sdi_cm_clksel2_pll:
 omap243x_sdi_sdrc_dlla_ctrl:
 	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 omap243x_sdi_prcm_voltctrl:
-	.word OMAP243X_PRCM_VOLTCTRL
+	.word OMAP2430_PRCM_VOLTCTRL
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
 	.word	. - omap243x_sram_ddr_init
 
@@ -220,11 +220,11 @@ omap243x_srs_sdrc_dlla_ctrl:
 omap243x_srs_sdrc_rfr_ctrl:
 	.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 omap243x_srs_prcm_voltctrl:
-	.word OMAP243X_PRCM_VOLTCTRL
+	.word OMAP2430_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
 	.word	. - omap243x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 omap243x_ssp_set_config:
-	.word OMAP243X_PRCM_CLKCFG_CTRL
+	.word OMAP2430_PRCM_CLKCFG_CTRL
 omap243x_ssp_pll_ctl:
 	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
 omap243x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 2c714613634..c080c82521e 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -40,69 +40,74 @@
 /*
  * Change frequency of core dpll
  * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
+ *      SDRC rates < 83MHz
  */
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
+	ldr	r4, [sp, #52]		@ pull extra args off the stack
+	dsb				@ flush buffered writes to interconnect
 	cmp	r3, #0x2
 	blne	configure_sdrc
-	cmp	r3, #0x2
+	cmp	r4, #0x1
+	bleq	unlock_dll
 	blne	lock_dll
-	cmp	r3, #0x1
-	blne	unlock_dll
 	bl	sdram_in_selfrefresh	@ put the SDRAM in self refresh
 	bl 	configure_core_dpll
 	bl	enable_sdrc
-	cmp	r3, #0x1
-	blne	wait_dll_unlock
-	cmp	r3, #0x2
+	cmp	r4, #0x1
+	bleq	wait_dll_unlock
 	blne	wait_dll_lock
 	cmp	r3, #0x1
 	blne	configure_sdrc
+	isb				@ prevent speculative exec past here
 	mov 	r0, #0 			@ return value
 	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
 unlock_dll:
-	ldr	r4, omap3_sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	orr	r5, r5, #0x4
-	str	r5, [r4]
+	ldr	r11, omap3_sdrc_dlla_ctrl
+	ldr	r12, [r11]
+	orr	r12, r12, #0x4
+	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 lock_dll:
-	ldr	r4, omap3_sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	bic	r5, r5, #0x4
-	str	r5, [r4]
+	ldr	r11, omap3_sdrc_dlla_ctrl
+	ldr	r12, [r11]
+	bic	r12, r12, #0x4
+	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 sdram_in_selfrefresh:
-	mov	r5, #0x0		@ Move 0 to R5
-	mcr	p15, 0, r5, c7, c10, 5	@ memory barrier
-	ldr	r4, omap3_sdrc_power	@ read the SDRC_POWER register
-	ldr	r5, [r4]		@ read the contents of SDRC_POWER
-	orr 	r5, r5, #0x40		@ enable self refresh on idle req
-	str 	r5, [r4]		@ write back to SDRC_POWER register
-	ldr	r4, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
-	ldr	r5, [r4]
-	bic	r5, r5, #0x2		@ disable iclk bit for SRDC
-	str 	r5, [r4]
+	ldr	r11, omap3_sdrc_power	@ read the SDRC_POWER register
+	ldr	r12, [r11]		@ read the contents of SDRC_POWER
+	mov	r9, r12			@ keep a copy of SDRC_POWER bits
+	orr 	r12, r12, #0x40		@ enable self refresh on idle req
+	bic 	r12, r12, #0x4		@ clear PWDENA
+	str 	r12, [r11]		@ write back to SDRC_POWER register
+	ldr	r12, [r11]		@ posted-write barrier for SDRC
+	ldr	r11, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
+	ldr	r12, [r11]
+	bic	r12, r12, #0x2		@ disable iclk bit for SDRC
+	str 	r12, [r11]
 wait_sdrc_idle:
-	ldr 	r4, omap3_cm_idlest1_core
-	ldr 	r5, [r4]
-	and 	r5, r5, #0x2		@ check for SDRC idle
-	cmp 	r5, #2
+	ldr 	r11, omap3_cm_idlest1_core
+	ldr 	r12, [r11]
+	and 	r12, r12, #0x2		@ check for SDRC idle
+	cmp 	r12, #2
 	bne 	wait_sdrc_idle
 	bx 	lr
 configure_core_dpll:
-	ldr 	r4, omap3_cm_clksel1_pll
-	ldr	r5, [r4]
-	ldr	r6, core_m2_mask_val	@ modify m2 for core dpll
-	and	r5, r5, r6
-	orr	r5, r5, r3, lsl #0x1B	@ r3 contains the M2 val
-	str	r5, [r4]
-	mov 	r5, #0x800		@ wait for the clock to stabilise
+	ldr 	r11, omap3_cm_clksel1_pll
+	ldr	r12, [r11]
+	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
+	and	r12, r12, r10
+	orr	r12, r12, r3, lsl #0x1B	@ r3 contains the M2 val
+	str	r12, [r11]
+	ldr	r12, [r11]		@ posted-write barrier for CM
+	mov 	r12, #0x800		@ wait for the clock to stabilise
 	cmp	r3, #2
 	bne	wait_clk_stable
 	bx	lr
 wait_clk_stable:
-	subs 	r5, r5, #1
+	subs 	r12, r12, #1
 	bne	wait_clk_stable
 	nop
 	nop
@@ -116,42 +121,42 @@ wait_clk_stable:
 	nop
 	bx	lr
 enable_sdrc:
-	ldr 	r4, omap3_cm_iclken1_core
-	ldr	r5, [r4]
-	orr 	r5, r5, #0x2		@ enable iclk bit for SDRC
-	str 	r5, [r4]
+	ldr 	r11, omap3_cm_iclken1_core
+	ldr	r12, [r11]
+	orr 	r12, r12, #0x2		@ enable iclk bit for SDRC
+	str 	r12, [r11]
 wait_sdrc_idle1:
-	ldr 	r4, omap3_cm_idlest1_core
-	ldr	r5, [r4]
-	and 	r5, r5, #0x2
-	cmp	r5, #0
+	ldr 	r11, omap3_cm_idlest1_core
+	ldr	r12, [r11]
+	and 	r12, r12, #0x2
+	cmp	r12, #0
 	bne	wait_sdrc_idle1
-	ldr	r4, omap3_sdrc_power
-	ldr	r5, [r4]
-	bic 	r5, r5, #0x40
-	str 	r5, [r4]
+restore_sdrc_power_val:
+	ldr	r11, omap3_sdrc_power
+	str	r9, [r11]		@ restore SDRC_POWER, no barrier needed
 	bx	lr
 wait_dll_lock:
-	ldr	r4, omap3_sdrc_dlla_status
-	ldr	r5, [r4]
-	and 	r5, r5, #0x4
-	cmp	r5, #0x4
+	ldr	r11, omap3_sdrc_dlla_status
+	ldr	r12, [r11]
+	and 	r12, r12, #0x4
+	cmp	r12, #0x4
 	bne	wait_dll_lock
 	bx	lr
 wait_dll_unlock:
-	ldr	r4, omap3_sdrc_dlla_status
-	ldr	r5, [r4]
-	and	r5, r5, #0x4
-	cmp	r5, #0x0
+	ldr	r11, omap3_sdrc_dlla_status
+	ldr	r12, [r11]
+	and	r12, r12, #0x4
+	cmp	r12, #0x0
 	bne	wait_dll_unlock
 	bx	lr
 configure_sdrc:
-	ldr	r4, omap3_sdrc_rfr_ctrl
-	str	r0, [r4]
-	ldr	r4, omap3_sdrc_actim_ctrla
-	str	r1, [r4]
-	ldr	r4, omap3_sdrc_actim_ctrlb
-	str	r2, [r4]
+	ldr	r11, omap3_sdrc_rfr_ctrl
+	str	r0, [r11]
+	ldr	r11, omap3_sdrc_actim_ctrla
+	str	r1, [r11]
+	ldr	r11, omap3_sdrc_actim_ctrlb
+	str	r2, [r11]
+	ldr	r2, [r11]		@ posted-write barrier for SDRC
 	bx	lr
 
 omap3_sdrc_power:
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index f36aba12090..97eeeebcb06 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -17,9 +17,10 @@
  *
  * Some parts based off of TI's 24xx code:
  *
- *   Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
  *
  * Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
@@ -37,6 +38,7 @@
 
 #include <asm/mach/time.h>
 #include <mach/dmtimer.h>
+#include <asm/localtimer.h>
 
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
 #define MAX_GPTIMER_ID		12
@@ -82,7 +84,8 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_PERIODIC:
 		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
 		period -= 1;
-
+		if (cpu_is_omap44xx())
+			period = 0xff;	/* FIXME: */
 		omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -145,6 +148,9 @@ static void __init omap2_gp_clockevent_init(void)
 		     "timer-gp: omap_dm_timer_set_source() failed\n");
 
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+	if (cpu_is_omap44xx())
+		/* Assuming 32kHz clk is driving GPT1 */
+		tick_rate = 32768;	/* FIXME: */
 
 	pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
 		gptimer_id, tick_rate);
@@ -224,6 +230,9 @@ static void __init omap2_gp_clocksource_init(void)
 
 static void __init omap2_gp_timer_init(void)
 {
+#ifdef CONFIG_LOCAL_TIMERS
+	twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+#endif
 	omap_dm_timer_init();
 
 	omap2_gp_clockevent_init();
diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c
new file mode 100644
index 00000000000..c1a650a9910
--- /dev/null
+++ b/arch/arm/mach-omap2/timer-mpu.c
@@ -0,0 +1,34 @@
+/*
+ * The MPU local timer source file. In OMAP4, both cortex-a9 cores have
+ * own timer in it's MPU domain. These timers will be driving the
+ * linux kernel SMP tick framework when active. These timers are not
+ * part of the wake up domain.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This file is based on arm realview smp platform file.
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = INT_44XX_LOCALTIMER_IRQ;
+	twd_timer_setup(evt);
+}
+
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 34a56a136ef..d85296dc896 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,10 +28,20 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/pm.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
 
+#define OTG_SYSCONFIG	(OMAP34XX_HSUSB_OTG_BASE + 0x404)
+
+static void __init usb_musb_pm_init(void)
+{
+	/* Ensure force-idle mode for OTG controller */
+	if (cpu_is_omap34xx())
+		omap_writel(0, OTG_SYSCONFIG);
+}
+
+#ifdef CONFIG_USB_MUSB_SOC
+
 static struct resource musb_resources[] = {
 	[0] = { /* start and end set dynamically */
 		.flags	= IORESOURCE_MEM,
@@ -184,4 +194,13 @@ void __init usb_musb_init(void)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 		return;
 	}
+
+	usb_musb_pm_init();
+}
+
+#else
+void __init usb_musb_init(void)
+{
+	usb_musb_pm_init();
 }
+#endif /* CONFIG_USB_MUSB_SOC */
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index c14d1213727..6f3f77d031d 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
+#include <linux/errno.h>
 #include <mach/hardware.h>
 #include "common.h"
 
@@ -44,6 +45,7 @@
 #define TARGET_DEV_BUS		1
 #define TARGET_PCI		3
 #define TARGET_PCIE		4
+#define TARGET_SRAM		9
 #define ATTR_PCIE_MEM		0x59
 #define ATTR_PCIE_IO		0x51
 #define ATTR_PCIE_WA		0x79
@@ -53,6 +55,7 @@
 #define ATTR_DEV_CS1		0x1d
 #define ATTR_DEV_CS2		0x1b
 #define ATTR_DEV_BOOT		0xf
+#define ATTR_SRAM		0x0
 
 /*
  * Helpers to get DDR bank info
@@ -87,13 +90,13 @@ static int __init orion5x_cpu_win_can_remap(int win)
 	return 0;
 }
 
-static void __init setup_cpu_win(int win, u32 base, u32 size,
+static int __init setup_cpu_win(int win, u32 base, u32 size,
 				 u8 target, u8 attr, int remap)
 {
 	if (win >= 8) {
 		printk(KERN_ERR "setup_cpu_win: trying to allocate "
 				"window %d\n", win);
-		return;
+		return -ENOSPC;
 	}
 
 	writel(base & 0xffff0000, CPU_WIN_BASE(win));
@@ -107,6 +110,7 @@ static void __init setup_cpu_win(int win, u32 base, u32 size,
 		writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
 		writel(0, CPU_WIN_REMAP_HI(win));
 	}
+	return 0;
 }
 
 void __init orion5x_setup_cpu_mbus_bridge(void)
@@ -193,3 +197,9 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
 	setup_cpu_win(win_alloc_count++, base, size,
 		      TARGET_PCIE, ATTR_PCIE_WA, -1);
 }
+
+int __init orion5x_setup_sram_win(void)
+{
+	return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE,
+			ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1);
+}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index b1c7778d9f9..eafcc49009e 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -31,7 +31,7 @@
 #include <plat/ehci-orion.h>
 #include <plat/mv_xor.h>
 #include <plat/orion_nand.h>
-#include <plat/orion5x_wdt.h>
+#include <plat/orion_wdt.h>
 #include <plat/time.h>
 #include "common.h"
 
@@ -536,16 +536,52 @@ void __init orion5x_xor_init(void)
 	platform_device_register(&orion5x_xor1_channel);
 }
 
+static struct resource orion5x_crypto_res[] = {
+	{
+		.name   = "regs",
+		.start  = ORION5X_CRYPTO_PHYS_BASE,
+		.end    = ORION5X_CRYPTO_PHYS_BASE + 0xffff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "sram",
+		.start  = ORION5X_SRAM_PHYS_BASE,
+		.end    = ORION5X_SRAM_PHYS_BASE + SZ_8K - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "crypto interrupt",
+		.start  = IRQ_ORION5X_CESA,
+		.end    = IRQ_ORION5X_CESA,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device orion5x_crypto_device = {
+	.name           = "mv_crypto",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(orion5x_crypto_res),
+	.resource       = orion5x_crypto_res,
+};
+
+int __init orion5x_crypto_init(void)
+{
+	int ret;
+
+	ret = orion5x_setup_sram_win();
+	if (ret)
+		return ret;
+
+	return platform_device_register(&orion5x_crypto_device);
+}
 
 /*****************************************************************************
  * Watchdog
  ****************************************************************************/
-static struct orion5x_wdt_platform_data orion5x_wdt_data = {
+static struct orion_wdt_platform_data orion5x_wdt_data = {
 	.tclk			= 0,
 };
 
 static struct platform_device orion5x_wdt_device = {
-	.name		= "orion5x_wdt",
+	.name		= "orion_wdt",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &orion5x_wdt_data,
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 798b9a5e3da..de483e83edd 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -26,6 +26,7 @@ void orion5x_setup_dev0_win(u32 base, u32 size);
 void orion5x_setup_dev1_win(u32 base, u32 size);
 void orion5x_setup_dev2_win(u32 base, u32 size);
 void orion5x_setup_pcie_wa_win(u32 base, u32 size);
+int orion5x_setup_sram_win(void);
 
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
@@ -37,6 +38,7 @@ void orion5x_spi_init(void);
 void orion5x_uart0_init(void);
 void orion5x_uart1_init(void);
 void orion5x_xor_init(void);
+int orion5x_crypto_init(void);
 
 /*
  * PCIe/PCI functions.
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index be896e59d3e..5c9744cd8ef 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -17,8 +17,8 @@
 
 #define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE | 0x104)
 
-#define CPU_RESET_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
-#define WDT_RESET		0x0002
+#define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define WDT_RESET_OUT_EN	0x0002
 
 #define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE | 0x10c)
 
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 377a773ae53..2d876657053 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -24,6 +24,7 @@
  * f1000000	on-chip peripheral registers
  * f2000000	PCIe I/O space
  * f2100000	PCI I/O space
+ * f2200000	SRAM dedicated for the crypto unit
  * f4000000	device bus mappings (boot)
  * fa000000	device bus mappings (cs0)
  * fa800000	device bus mappings (cs2)
@@ -49,6 +50,9 @@
 #define ORION5X_PCI_IO_BUS_BASE		0x00100000
 #define ORION5X_PCI_IO_SIZE		SZ_1M
 
+#define ORION5X_SRAM_PHYS_BASE		(0xf2200000)
+#define ORION5X_SRAM_SIZE		SZ_8K
+
 /* Relevant only for Orion-1/Orion-NAS */
 #define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
 #define ORION5X_PCIE_WA_VIRT_BASE	0xfe000000
@@ -94,6 +98,8 @@
 #define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
 #define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
 
+#define ORION5X_CRYPTO_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x90000)
+
 #define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
 #define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
 
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index e912490fff2..60e734c1045 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -23,7 +23,7 @@ static inline void arch_reset(char mode, const char *cmd)
 	/*
 	 * Enable and issue soft reset
 	 */
-	orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+	orion5x_setbits(RSTOUTn_MASK, (1 << 2));
 	orion5x_setbits(CPU_SOFT_RESET, 1);
 }
 
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index e23a3f91d6c..bc4c3b9aaf8 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -124,6 +124,9 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 	u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
 	u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
 
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
 	while (mode->mpp >= 0) {
 		u32 *reg;
 		int num_type;
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 41e6d5033d5..61c086b6672 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -181,9 +181,9 @@ static void mss2_power_off(void)
 	/*
 	 * Enable and issue soft reset
 	 */
-	reg = readl(CPU_RESET_MASK);
+	reg = readl(RSTOUTn_MASK);
 	reg |= 1 << 2;
-	writel(reg, CPU_RESET_MASK);
+	writel(reg, RSTOUTn_MASK);
 
 	reg = readl(CPU_SOFT_RESET);
 	reg |= 1;
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
index 0f9cdf45895..37b3d487529 100644
--- a/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -25,6 +25,7 @@ struct fpga_devices {
 	/* Technologic Systems */
 	struct fpga_device 	ts_rtc;
 	struct fpga_device 	ts_nand;
+	struct fpga_device 	ts_rng;
 };
 
 struct ts78xx_fpga_data {
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 9a6b397f972..5041d1bc26b 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -17,6 +17,7 @@
 #include <linux/m48t86.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/timeriomem-rng.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -270,12 +271,57 @@ static void ts78xx_ts_nand_unload(void)
 }
 
 /*****************************************************************************
+ * HW RNG
+ ****************************************************************************/
+#define TS_RNG_DATA	(TS78XX_FPGA_REGS_PHYS_BASE | 0x044)
+
+static struct resource ts78xx_ts_rng_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= TS_RNG_DATA,
+	.end		= TS_RNG_DATA + 4 - 1,
+};
+
+static struct timeriomem_rng_data ts78xx_ts_rng_data = {
+	.period		= 1000000, /* one second */
+};
+
+static struct platform_device ts78xx_ts_rng_device = {
+	.name		= "timeriomem_rng",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ts78xx_ts_rng_data,
+	},
+	.resource	= &ts78xx_ts_rng_resource,
+	.num_resources	= 1,
+};
+
+static int ts78xx_ts_rng_load(void)
+{
+	int rc;
+
+	if (ts78xx_fpga.supports.ts_rng.init == 0) {
+		rc = platform_device_register(&ts78xx_ts_rng_device);
+		if (!rc)
+			ts78xx_fpga.supports.ts_rng.init = 1;
+	} else
+		rc = platform_device_add(&ts78xx_ts_rng_device);
+
+	return rc;
+};
+
+static void ts78xx_ts_rng_unload(void)
+{
+	platform_device_del(&ts78xx_ts_rng_device);
+}
+
+/*****************************************************************************
  * FPGA 'hotplug' support code
  ****************************************************************************/
 static void ts78xx_fpga_devices_zero_init(void)
 {
 	ts78xx_fpga.supports.ts_rtc.init = 0;
 	ts78xx_fpga.supports.ts_nand.init = 0;
+	ts78xx_fpga.supports.ts_rng.init = 0;
 }
 
 static void ts78xx_fpga_supports(void)
@@ -289,10 +335,12 @@ static void ts78xx_fpga_supports(void)
 	case TS7800_REV_5:
 		ts78xx_fpga.supports.ts_rtc.present = 1;
 		ts78xx_fpga.supports.ts_nand.present = 1;
+		ts78xx_fpga.supports.ts_rng.present = 1;
 		break;
 	default:
 		ts78xx_fpga.supports.ts_rtc.present = 0;
 		ts78xx_fpga.supports.ts_nand.present = 0;
+		ts78xx_fpga.supports.ts_rng.present = 0;
 	}
 }
 
@@ -316,6 +364,14 @@ static int ts78xx_fpga_load_devices(void)
 		}
 		ret |= tmp;
 	}
+	if (ts78xx_fpga.supports.ts_rng.present == 1) {
+		tmp = ts78xx_ts_rng_load();
+		if (tmp) {
+			printk(KERN_INFO "TS-78xx: RNG not registered\n");
+			ts78xx_fpga.supports.ts_rng.present = 0;
+		}
+		ret |= tmp;
+	}
 
 	return ret;
 }
@@ -328,6 +384,8 @@ static int ts78xx_fpga_unload_devices(void)
 		ts78xx_ts_rtc_unload();
 	if (ts78xx_fpga.supports.ts_nand.present == 1)
 		ts78xx_ts_nand_unload();
+	if (ts78xx_fpga.supports.ts_rng.present == 1)
+		ts78xx_ts_rng_unload();
 
 	return ret;
 }
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 7ddc22c2bb5..69208217b22 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -15,6 +15,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -97,6 +98,20 @@ static struct mv643xx_eth_platform_data wnr854t_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_chip_data wnr854t_switch_chip_data = {
+	.port_names[0] = "lan3",
+	.port_names[1] = "lan4",
+	.port_names[2] = "wan",
+	.port_names[3] = "cpu",
+	.port_names[5] = "lan1",
+	.port_names[7] = "lan2",
+};
+
+static struct dsa_platform_data wnr854t_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &wnr854t_switch_chip_data,
+};
+
 static void __init wnr854t_init(void)
 {
 	/*
@@ -110,6 +125,7 @@ static void __init wnr854t_init(void)
 	 * Configure peripherals.
 	 */
 	orion5x_eth_init(&wnr854t_eth_data);
+	orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
 	orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 17d3fbd368a..f4533f8ff4e 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -51,6 +51,12 @@ config MACH_INTELMOTE2
 	select IWMMXT
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_STARGATE2
+	bool "Intel Stargate 2 Platform"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
@@ -88,6 +94,10 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
+
 config CORGI_SSP_DEPRECATED
 	bool
 	select PXA_SSP
@@ -280,6 +290,7 @@ config MACH_ZYLONITE
 	select PXA3xx
 	select PXA_SSP
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
@@ -308,6 +319,14 @@ config MACH_CM_X300
 	select PXA3xx
 	select CPU_PXA300
 
+config MACH_H4700
+	bool "HP iPAQ hx4700"
+	select PXA27x
+	select IWMMXT
+	select PXA_SSP
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
@@ -505,12 +524,6 @@ config PXA_SSP
 	help
 	  Enable support for PXA2xx SSP ports
 
-config PXA_PWM
-	tristate
-	default BACKLIGHT_PWM
-	help
-	  Enable support for PXA2xx/PXA3xx PWM controllers
-
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 	depends on MACH_TOSA
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 682dbf4e14b..d18ffef44b8 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -15,7 +15,6 @@ endif
 
 # Generic drivers that other drivers may depend upon
 obj-$(CONFIG_PXA_SSP)		+= ssp.o
-obj-$(CONFIG_PXA_PWM)		+= pwm.o
 
 # SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
@@ -47,6 +46,7 @@ obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
+obj-$(CONFIG_MACH_H4700)	+= hx4700.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
 obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
 obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
@@ -78,6 +78,7 @@ obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_CSB726)	+= csb726.o
 obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
 
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index db52d2c4791..49ae3829231 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -86,20 +86,3 @@ void clks_register(struct clk_lookup *clks, size_t num)
 	for (i = 0; i < num; i++)
 		clkdev_add(&clks[i]);
 }
-
-int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
-	struct device *dev)
-{
-	struct clk *r = clk_get(dev, id);
-	struct clk_lookup *l;
-
-	if (!r)
-		return -ENODEV;
-
-	l = clkdev_alloc(r, alias, alias_dev_name);
-	clk_put(r);
-	if (!l)
-		return -ENODEV;
-	clkdev_add(l);
-	return 0;
-}
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 34576ba5f5f..1d2cec25391 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -335,6 +335,10 @@ void __init cmx270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
 
+#ifdef CONFIG_PM
+	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
 	cmx270_init_rtc();
 	cmx270_init_mmc();
 	cmx270_init_ohci();
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index a9f48b1cb54..465da26591b 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -21,18 +21,20 @@
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/leds.h>
+#include <linux/rtc-v3020.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/setup.h>
 
 #include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/pxa3xx_nand.h>
 
 #include <asm/mach/map.h>
@@ -46,6 +48,11 @@
 
 #define	CM_X300_MMC2_IRQ	IRQ_GPIO(GPIO82_MMC2_IRQ)
 
+#define GPIO95_RTC_CS		(95)
+#define GPIO96_RTC_WR		(96)
+#define GPIO97_RTC_RD		(97)
+#define GPIO98_RTC_IO		(98)
+
 static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
@@ -135,6 +142,12 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	GPIO85_GPIO,			/* MMC WP */
 	GPIO99_GPIO,			/* Ethernet IRQ */
 
+	/* RTC GPIOs */
+	GPIO95_GPIO,			/* RTC CS */
+	GPIO96_GPIO,			/* RTC WR */
+	GPIO97_GPIO,			/* RTC RD */
+	GPIO98_GPIO,			/* RTC IO */
+
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
@@ -265,6 +278,7 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
 
 static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
 	.enable_arbiter	= 1,
+	.keep_config	= 1,
 	.parts		= cm_x300_nand_partitions,
 	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
 };
@@ -441,6 +455,31 @@ static void __init cm_x300_init_i2c(void)
 static inline void cm_x300_init_i2c(void) {}
 #endif
 
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+struct v3020_platform_data cm_x300_v3020_pdata = {
+	.use_gpio	= 1,
+	.gpio_cs	= GPIO95_RTC_CS,
+	.gpio_wr	= GPIO96_RTC_WR,
+	.gpio_rd	= GPIO97_RTC_RD,
+	.gpio_io	= GPIO98_RTC_IO,
+};
+
+static struct platform_device cm_x300_rtc_device = {
+	.name		= "v3020",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cm_x300_v3020_pdata,
+	}
+};
+
+static void __init cm_x300_init_rtc(void)
+{
+	platform_device_register(&cm_x300_rtc_device);
+}
+#else
+static inline void cm_x300_init_rtc(void) {}
+#endif
+
 static void __init cm_x300_init(void)
 {
 	/* board-processor specific GPIO initialization */
@@ -453,6 +492,19 @@ static void __init cm_x300_init(void)
 	cm_x300_init_nand();
 	cm_x300_init_leds();
 	cm_x300_init_i2c();
+	cm_x300_init_rtc();
+}
+
+static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
+				 char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks = 2;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	mi->bank[0].size = (64*1024*1024);
+	mi->bank[1].start = 0xc0000000;
+	mi->bank[1].node = 0;
+	mi->bank[1].size = (64*1024*1024);
 }
 
 MACHINE_START(CM_X300, "CM-X300 module")
@@ -463,4 +515,5 @@ MACHINE_START(CM_X300, "CM-X300 module")
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cm_x300_init,
+	.fixup		= cm_x300_fixup,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 930e364ccde..962dda2e154 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -42,7 +42,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/pxa25x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
@@ -445,13 +445,8 @@ static struct ads7846_platform_data corgi_ads7846_info = {
 	.wait_for_sync		= corgi_wait_for_hsync,
 };
 
-static void corgi_ads7846_cs(u32 command)
-{
-	gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip corgi_ads7846_chip = {
-	.cs_control	= corgi_ads7846_cs,
+	.gpio_cs	= CORGI_GPIO_ADS7846_CS,
 };
 
 static void corgi_bl_kick_battery(void)
@@ -475,22 +470,12 @@ static struct corgi_lcd_platform_data corgi_lcdcon_info = {
 	.kick_battery		= corgi_bl_kick_battery,
 };
 
-static void corgi_lcdcon_cs(u32 command)
-{
-	gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
-	.cs_control	= corgi_lcdcon_cs,
+	.gpio_cs	= CORGI_GPIO_LCDCON_CS,
 };
 
-static void corgi_max1111_cs(u32 command)
-{
-	gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip corgi_max1111_chip = {
-	.cs_control	= corgi_max1111_cs,
+	.gpio_cs	= CORGI_GPIO_MAX1111_CS,
 };
 
 static struct spi_board_info corgi_spi_devices[] = {
@@ -520,32 +505,8 @@ static struct spi_board_info corgi_spi_devices[] = {
 
 static void __init corgi_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
-	if (err)
-		goto err_free_2;
-
-	gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
-	gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
-	gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
-
 	pxa2xx_set_spi_info(1, &corgi_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
-	return;
-
-err_free_2:
-	gpio_free(CORGI_GPIO_LCDCON_CS);
-err_free_1:
-	gpio_free(CORGI_GPIO_ADS7846_CS);
 }
 #else
 static inline void corgi_init_spi(void) {}
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 7f04b3a761d..a093282fe4d 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -41,7 +41,6 @@ static void corgi_charger_init(void)
 	pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN);
-	sharpsl_pm_pxa_init();
 }
 
 static void corgi_measure_temp(int on)
@@ -191,7 +190,7 @@ unsigned long corgipm_read_devdata(int type)
 
 static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.init            = corgi_charger_init,
-	.exit            = sharpsl_pm_pxa_remove,
+	.exit            = NULL,
 	.gpio_batlock    = CORGI_GPIO_BAT_COVER,
 	.gpio_acin       = CORGI_GPIO_AC_IN,
 	.gpio_batfull    = CORGI_GPIO_CHRG_FULL,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 083a1d851d4..3a8ee2272ad 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -36,6 +36,8 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/pxa2xx-regs.h>
 
@@ -47,6 +49,8 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
 #define freq_debug  0
 #endif
 
+static struct regulator *vcc_core;
+
 static unsigned int pxa27x_maxfreq;
 module_param(pxa27x_maxfreq, uint, 0);
 MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
@@ -58,6 +62,8 @@ typedef struct {
 	unsigned int cccr;
 	unsigned int div2;
 	unsigned int cclkcfg;
+	int vmin;
+	int vmax;
 } pxa_freqs_t;
 
 /* Define the refresh period in mSec for the SDRAM and the number of rows */
@@ -82,24 +88,24 @@ static unsigned int sdram_rows;
 
 static pxa_freqs_t pxa255_run_freqs[] =
 {
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500,  99500, 0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
-	{132700, 132700, 0x123, 1,  CCLKCFG},	/* 133,  133,   66,   66  */
-	{199100,  99500, 0x141, 0,  CCLKCFG},	/* 199,  199,   99,   99  */
-	{265400, 132700, 0x143, 1,  CCLKCFG},	/* 265,  265,  133,   66  */
-	{331800, 165900, 0x145, 1,  CCLKCFG},	/* 331,  331,  166,   83  */
-	{398100,  99500, 0x161, 0,  CCLKCFG},	/* 398,  398,  196,   99  */
+	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	           run  turbo PXbus SDRAM */
+	{ 99500,  99500, 0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
+	{132700, 132700, 0x123, 1,  CCLKCFG, -1, -1},	/* 133,  133,   66,   66  */
+	{199100,  99500, 0x141, 0,  CCLKCFG, -1, -1},	/* 199,  199,   99,   99  */
+	{265400, 132700, 0x143, 1,  CCLKCFG, -1, -1},	/* 265,  265,  133,   66  */
+	{331800, 165900, 0x145, 1,  CCLKCFG, -1, -1},	/* 331,  331,  166,   83  */
+	{398100,  99500, 0x161, 0,  CCLKCFG, -1, -1},	/* 398,  398,  196,   99  */
 };
 
 /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
 static pxa_freqs_t pxa255_turbo_freqs[] =
 {
 	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500, 99500,  0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
-	{199100, 99500,  0x221, 0,  CCLKCFG},	/*  99,  199,   50,   99  */
-	{298500, 99500,  0x321, 0,  CCLKCFG},	/*  99,  287,   50,   99  */
-	{298600, 99500,  0x1c1, 0,  CCLKCFG},	/* 199,  287,   99,   99  */
-	{398100, 99500,  0x241, 0,  CCLKCFG},	/* 199,  398,   99,   99  */
+	{ 99500, 99500,  0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
+	{199100, 99500,  0x221, 0,  CCLKCFG, -1, -1},	/*  99,  199,   50,   99  */
+	{298500, 99500,  0x321, 0,  CCLKCFG, -1, -1},	/*  99,  287,   50,   99  */
+	{298600, 99500,  0x1c1, 0,  CCLKCFG, -1, -1},	/* 199,  287,   99,   99  */
+	{398100, 99500,  0x241, 0,  CCLKCFG, -1, -1},	/* 199,  398,   99,   99  */
 };
 
 #define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
@@ -148,13 +154,13 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
    ((T)  ? CCLKCFG_TURBO : 0))
 
 static pxa_freqs_t pxa27x_freqs[] = {
-	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1)},
-	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1)},
-	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
-	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
-	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
-	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
-	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
+	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
+	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
+	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
+	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
+	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
+	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
 };
 
 #define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
@@ -163,6 +169,47 @@ static struct cpufreq_frequency_table
 
 extern unsigned get_clk_frequency_khz(int info);
 
+#ifdef CONFIG_REGULATOR
+
+static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
+{
+	int ret = 0;
+	int vmin, vmax;
+
+	if (!cpu_is_pxa27x())
+		return 0;
+
+	vmin = pxa_freq->vmin;
+	vmax = pxa_freq->vmax;
+	if ((vmin == -1) || (vmax == -1))
+		return 0;
+
+	ret = regulator_set_voltage(vcc_core, vmin, vmax);
+	if (ret)
+		pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
+		       vmin, vmax);
+	return ret;
+}
+
+static __init void pxa_cpufreq_init_voltages(void)
+{
+	vcc_core = regulator_get(NULL, "vcc_core");
+	if (IS_ERR(vcc_core)) {
+		pr_info("cpufreq: Didn't find vcc_core regulator\n");
+		vcc_core = NULL;
+	} else {
+		pr_info("cpufreq: Found vcc_core regulator\n");
+	}
+}
+#else
+static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
+{
+	return 0;
+}
+
+static __init void pxa_cpufreq_init_voltages(void) { }
+#endif
+
 static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
 			     pxa_freqs_t **pxa_freqs)
 {
@@ -251,6 +298,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	unsigned long flags;
 	unsigned int new_freq_cpu, new_freq_mem;
 	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
+	int ret = 0;
 
 	/* Get the current policy */
 	find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
@@ -273,6 +321,10 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
 			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
 
+	if (vcc_core && freqs.new > freqs.old)
+		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+	if (ret)
+		return ret;
 	/*
 	 * Tell everyone what we're about to do...
 	 * you should add a notify client with any platform specific
@@ -335,6 +387,18 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	 */
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
+	/*
+	 * Even if voltage setting fails, we don't report it, as the frequency
+	 * change succeeded. The voltage reduction is not a critical failure,
+	 * only power savings will suffer from this.
+	 *
+	 * Note: if the voltage change fails, and a return value is returned, a
+	 * bug is triggered (seems a deadlock). Should anybody find out where,
+	 * the "return 0" should become a "return ret".
+	 */
+	if (vcc_core && freqs.new < freqs.old)
+		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+
 	return 0;
 }
 
@@ -349,6 +413,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
 	if (cpu_is_pxa27x())
 		pxa27x_guess_max_freq();
 
+	pxa_cpufreq_init_voltages();
+
 	init_sdram_rows();
 
 	/* set default policy and cpuinfo */
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 2b289f83a61..7d3e1b46e55 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -16,15 +16,17 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/sm501.h>
+#include <linux/smsc911x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/csb726.h>
 #include <mach/mfp-pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -275,15 +277,26 @@ static struct resource csb726_lan_resources[] = {
 	{
 		.start	= CSB726_IRQ_LAN,
 		.end	= CSB726_IRQ_LAN,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
+struct smsc911x_platform_config csb726_lan_config = {
+	.irq_type	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+
 static struct platform_device csb726_lan = {
-	.name		= "smc911x",
+	.name		= "smsc911x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
 	.resource	= csb726_lan_resources,
+	.dev		= {
+		.platform_data	= &csb726_lan_config,
+	},
 };
 
 static struct platform_device *devices[] __initdata = {
@@ -303,6 +316,7 @@ static void __init csb726_init(void)
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_mci_info(&csb726_mci);
 	pxa_set_ohci_info(&csb726_ohci_platform_data);
+	pxa_set_ac97_info(NULL);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 29970f703f3..ecc08f360b6 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -8,7 +8,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
@@ -290,7 +290,7 @@ static struct resource pxa3xx_resources_i2c_power[] = {
 };
 
 struct platform_device pxa3xx_device_i2c_power = {
-	.name		= "pxa2xx-i2c",
+	.name		= "pxa3xx-pwri2c",
 	.id		= 1,
 	.resource	= pxa3xx_resources_i2c_power,
 	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index bc0f73fbd4c..243e0802b5f 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -28,6 +28,8 @@
 #include <linux/spi/libertas_spi.h>
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
 
 #include <media/soc_camera.h>
 
@@ -41,7 +43,7 @@
 #include <mach/ohci.h>
 #include <mach/mmc.h>
 #include <mach/pxa27x_keypad.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/pxa2xx_spi.h>
 
@@ -52,23 +54,31 @@
 #define GPIO13_MMC_CD		(13)
 #define GPIO95_MMC_WP		(95)
 #define GPIO56_NAND_RB		(56)
+#define GPIO93_CAM_RESET	(93)
+#define GPIO16_USB_HUB_RESET	(16)
 
 /* eXeda specific GPIOs */
 #define GPIO114_MMC_CD		(114)
 #define GPIO20_NAND_RB		(20)
 #define GPIO38_SD_PWEN		(38)
+#define GPIO37_WLAN_RST		(37)
+#define GPIO95_TOUCHPAD_INT	(95)
+#define GPIO130_CAM_RESET	(130)
+#define GPIO10_USB_HUB_RESET	(10)
 
 /* common  GPIOs */
 #define GPIO11_NAND_CS		(11)
-#define GPIO93_CAM_RESET	(93)
 #define GPIO41_ETHIRQ		(41)
 #define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
 #define GPIO115_WLAN_PWEN	(115)
 #define GPIO19_WLAN_STRAP	(19)
+#define GPIO9_USB_VBUS_EN	(9)
 
 static int mmc_cd;
 static int nand_rb;
 static int dm9000_flags;
+static int cam_reset;
+static int usb_hub_reset;
 
 static unsigned long common_pin_config[] = {
 	/* AC'97 */
@@ -180,7 +190,6 @@ static unsigned long common_pin_config[] = {
 
 	/* power controls */
 	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
-	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
 	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
 
 	/* NAND controls */
@@ -191,14 +200,18 @@ static unsigned long common_pin_config[] = {
 };
 
 static unsigned long em_x270_pin_config[] = {
-	GPIO13_GPIO,	/* MMC card detect */
-	GPIO56_GPIO,	/* NAND Ready/Busy */
-	GPIO95_GPIO,	/* MMC Write protect */
+	GPIO13_GPIO,				/* MMC card detect */
+	GPIO16_GPIO,				/* USB hub reset */
+	GPIO56_GPIO,				/* NAND Ready/Busy */
+	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
+	GPIO95_GPIO,				/* MMC Write protect */
 };
 
 static unsigned long exeda_pin_config[] = {
+	GPIO10_GPIO,				/* USB hub reset */
 	GPIO20_GPIO,				/* NAND Ready/Busy */
 	GPIO38_GPIO	| MFP_LPM_DRIVE_LOW,	/* SD slot power */
+	GPIO95_GPIO,				/* touchpad IRQ */
 	GPIO114_GPIO,				/* MMC card detect */
 };
 
@@ -464,18 +477,79 @@ static inline void em_x270_init_nor(void) {}
 
 /* PXA27x OHCI controller setup */
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct regulator *em_x270_usb_ldo;
+
+static int em_x270_usb_hub_init(void)
+{
+	int err;
+
+	em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
+	if (IS_ERR(em_x270_usb_ldo))
+		return PTR_ERR(em_x270_usb_ldo);
+
+	err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
+	if (err)
+		goto err_free_usb_ldo;
+
+	err = gpio_request(usb_hub_reset, "hub rst");
+	if (err)
+		goto err_free_vbus_gpio;
+
+	/* USB Hub power-on and reset */
+	gpio_direction_output(usb_hub_reset, 0);
+	regulator_enable(em_x270_usb_ldo);
+	gpio_set_value(usb_hub_reset, 1);
+	gpio_set_value(usb_hub_reset, 0);
+	regulator_disable(em_x270_usb_ldo);
+	regulator_enable(em_x270_usb_ldo);
+	gpio_set_value(usb_hub_reset, 1);
+
+	/* enable VBUS */
+	gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
+
+	return 0;
+
+err_free_vbus_gpio:
+	gpio_free(GPIO9_USB_VBUS_EN);
+err_free_usb_ldo:
+	regulator_put(em_x270_usb_ldo);
+
+	return err;
+}
+
 static int em_x270_ohci_init(struct device *dev)
 {
+	int err;
+
+	/* we don't want to entirely disable USB if the HUB init failed */
+	err = em_x270_usb_hub_init();
+	if (err)
+		pr_err("USB Hub initialization failed: %d\n", err);
+
 	/* enable port 2 transiever */
 	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
 
 	return 0;
 }
 
+static void em_x270_ohci_exit(struct device *dev)
+{
+	gpio_free(usb_hub_reset);
+	gpio_free(GPIO9_USB_VBUS_EN);
+
+	if (!IS_ERR(em_x270_usb_ldo)) {
+		if (regulator_is_enabled(em_x270_usb_ldo))
+			regulator_disable(em_x270_usb_ldo);
+
+		regulator_put(em_x270_usb_ldo);
+	}
+}
+
 static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
 	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 	.init		= em_x270_ohci_init,
+	.exit		= em_x270_ohci_exit,
 };
 
 static void __init em_x270_init_ohci(void)
@@ -677,26 +751,52 @@ static int em_x270_libertas_setup(struct spi_device *spi)
 	if (err)
 		return err;
 
+	err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+	if (err)
+		goto err_free_pwen;
+
+	if (machine_is_exeda()) {
+		err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
+		if (err)
+			goto err_free_strap;
+
+		gpio_direction_output(GPIO37_WLAN_RST, 1);
+		msleep(100);
+	}
+
 	gpio_direction_output(GPIO19_WLAN_STRAP, 1);
-	mdelay(100);
+	msleep(100);
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
 
 	gpio_direction_output(GPIO115_WLAN_PWEN, 0);
-	mdelay(100);
+	msleep(100);
 	gpio_set_value(GPIO115_WLAN_PWEN, 1);
-	mdelay(100);
+	msleep(100);
 
 	spi->bits_per_word = 16;
 	spi_setup(spi);
 
 	return 0;
+
+err_free_strap:
+	gpio_free(GPIO19_WLAN_STRAP);
+err_free_pwen:
+	gpio_free(GPIO115_WLAN_PWEN);
+
+	return err;
 }
 
 static int em_x270_libertas_teardown(struct spi_device *spi)
 {
 	gpio_set_value(GPIO115_WLAN_PWEN, 0);
 	gpio_free(GPIO115_WLAN_PWEN);
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	if (machine_is_exeda()) {
+		gpio_set_value(GPIO37_WLAN_RST, 0);
+		gpio_free(GPIO37_WLAN_RST);
+	}
 
 	return 0;
 }
@@ -863,26 +963,26 @@ static int em_x270_sensor_init(struct device *dev)
 {
 	int ret;
 
-	ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+	ret = gpio_request(cam_reset, "camera reset");
 	if (ret)
 		return ret;
 
-	gpio_direction_output(GPIO93_CAM_RESET, 0);
+	gpio_direction_output(cam_reset, 0);
 
 	em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
 	if (em_x270_camera_ldo == NULL) {
-		gpio_free(GPIO93_CAM_RESET);
+		gpio_free(cam_reset);
 		return -ENODEV;
 	}
 
 	ret = regulator_enable(em_x270_camera_ldo);
 	if (ret) {
 		regulator_put(em_x270_camera_ldo);
-		gpio_free(GPIO93_CAM_RESET);
+		gpio_free(cam_reset);
 		return ret;
 	}
 
-	gpio_set_value(GPIO93_CAM_RESET, 1);
+	gpio_set_value(cam_reset, 1);
 
 	return 0;
 }
@@ -902,7 +1002,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
 	if (on == is_on)
 		return 0;
 
-	gpio_set_value(GPIO93_CAM_RESET, !on);
+	gpio_set_value(cam_reset, !on);
 
 	if (on)
 		ret = regulator_enable(em_x270_camera_ldo);
@@ -912,7 +1012,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
 	if (ret)
 		return ret;
 
-	gpio_set_value(GPIO93_CAM_RESET, on);
+	gpio_set_value(cam_reset, on);
 
 	return 0;
 }
@@ -929,13 +1029,8 @@ static struct i2c_board_info em_x270_i2c_cam_info[] = {
 	},
 };
 
-static struct i2c_pxa_platform_data em_x270_i2c_info = {
-	.fast_mode = 1,
-};
-
 static void  __init em_x270_init_camera(void)
 {
-	pxa_set_i2c_info(&em_x270_i2c_info);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
 	pxa_set_camera_info(&em_x270_camera_platform_data);
 }
@@ -985,7 +1080,7 @@ struct led_info em_x270_led_info = {
 };
 
 struct power_supply_info em_x270_psy_info = {
-	.name = "LP555597P6H-FPS",
+	.name = "battery",
 	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
 	.voltage_max_design = 4200000,
 	.voltage_min_design = 3000000,
@@ -1069,6 +1164,29 @@ static void __init em_x270_init_da9030(void)
 	i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
 }
 
+static struct pca953x_platform_data exeda_gpio_ext_pdata = {
+	.gpio_base = 128,
+};
+
+static struct i2c_board_info exeda_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("pca9555", 0x21),
+		.platform_data = &exeda_gpio_ext_pdata,
+	},
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+	.fast_mode = 1,
+};
+
+static void __init em_x270_init_i2c(void)
+{
+	pxa_set_i2c_info(&em_x270_i2c_info);
+
+	if (machine_is_exeda())
+		i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
+}
+
 static void __init em_x270_module_init(void)
 {
 	pr_info("%s\n", __func__);
@@ -1077,6 +1195,8 @@ static void __init em_x270_module_init(void)
 	mmc_cd = GPIO13_MMC_CD;
 	nand_rb = GPIO56_NAND_RB;
 	dm9000_flags = DM9000_PLATF_32BITONLY;
+	cam_reset = GPIO93_CAM_RESET;
+	usb_hub_reset = GPIO16_USB_HUB_RESET;
 }
 
 static void __init em_x270_exeda_init(void)
@@ -1087,12 +1207,18 @@ static void __init em_x270_exeda_init(void)
 	mmc_cd = GPIO114_MMC_CD;
 	nand_rb = GPIO20_NAND_RB;
 	dm9000_flags = DM9000_PLATF_16BITONLY;
+	cam_reset = GPIO130_CAM_RESET;
+	usb_hub_reset = GPIO10_USB_HUB_RESET;
 }
 
 static void __init em_x270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
+#ifdef CONFIG_PM
+	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
 	if (machine_is_em_x270())
 		em_x270_module_init();
 	else if (machine_is_exeda())
@@ -1111,8 +1237,9 @@ static void __init em_x270_init(void)
 	em_x270_init_keypad();
 	em_x270_init_gpio_keys();
 	em_x270_init_ac97();
-	em_x270_init_camera();
 	em_x270_init_spi();
+	em_x270_init_i2c();
+	em_x270_init_camera();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 7db966dc29c..588b265e575 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
 #include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -25,13 +26,19 @@
 #include <mach/pxa27x.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/hardware.h>
 #include <mach/pxa27x_keypad.h>
 
 #include "devices.h"
 #include "generic.h"
 
+#define GPIO12_A780_FLIP_LID 		12
+#define GPIO15_A1200_FLIP_LID 		15
+#define GPIO15_A910_FLIP_LID 		15
+#define GPIO12_E680_LOCK_SWITCH 	12
+#define GPIO15_E6_LOCK_SWITCH 		15
+
 static struct platform_pwm_backlight_data ezx_backlight_data = {
 	.pwm_id		= 0,
 	.max_brightness	= 1023,
@@ -88,7 +95,7 @@ static struct pxafb_mach_info ezx_fb_info_2 = {
 	.lcd_conn	= LCD_COLOR_TFT_18BPP,
 };
 
-static struct platform_device *devices[] __initdata = {
+static struct platform_device *ezx_devices[] __initdata = {
 	&ezx_backlight_device,
 };
 
@@ -651,6 +658,35 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
 #endif /* CONFIG_MACH_EZX_E2 */
 
 #ifdef CONFIG_MACH_EZX_A780
+/* gpio_keys */
+static struct gpio_keys_button a780_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO12_A780_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A780 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
+	.buttons  = a780_buttons,
+	.nbuttons = ARRAY_SIZE(a780_buttons),
+};
+
+static struct platform_device a780_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a780_gpio_keys_platform_data,
+	},
+};
+
+static struct platform_device *a780_devices[] __initdata = {
+	&a780_gpio_keys,
+};
+
 static void __init a780_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -663,7 +699,8 @@ static void __init a780_init(void)
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
 }
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
@@ -678,10 +715,39 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E680
+/* gpio_keys */
+static struct gpio_keys_button e680_buttons[] = {
+	[0] = {
+		.code       = KEY_SCREENLOCK,
+		.gpio       = GPIO12_E680_LOCK_SWITCH,
+		.active_low = 0,
+		.desc       = "E680 lock switch",
+		.type       = EV_KEY,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
+	.buttons  = e680_buttons,
+	.nbuttons = ARRAY_SIZE(e680_buttons),
+};
+
+static struct platform_device e680_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &e680_gpio_keys_platform_data,
+	},
+};
+
 static struct i2c_board_info __initdata e680_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *e680_devices[] __initdata = {
+	&e680_gpio_keys,
+};
+
 static void __init e680_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -695,7 +761,8 @@ static void __init e680_init(void)
 
 	pxa_set_keypad_info(&e680_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e680_devices));
 }
 
 MACHINE_START(EZX_E680, "Motorola EZX E680")
@@ -710,10 +777,39 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_A1200
+/* gpio_keys */
+static struct gpio_keys_button a1200_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO15_A1200_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A1200 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
+	.buttons  = a1200_buttons,
+	.nbuttons = ARRAY_SIZE(a1200_buttons),
+};
+
+static struct platform_device a1200_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a1200_gpio_keys_platform_data,
+	},
+};
+
 static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *a1200_devices[] __initdata = {
+	&a1200_gpio_keys,
+};
+
 static void __init a1200_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -727,7 +823,8 @@ static void __init a1200_init(void)
 
 	pxa_set_keypad_info(&a1200_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
 }
 
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
@@ -742,6 +839,35 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_A910
+/* gpio_keys */
+static struct gpio_keys_button a910_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO15_A910_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A910 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
+	.buttons  = a910_buttons,
+	.nbuttons = ARRAY_SIZE(a910_buttons),
+};
+
+static struct platform_device a910_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a910_gpio_keys_platform_data,
+	},
+};
+
+static struct platform_device *a910_devices[] __initdata = {
+	&a910_gpio_keys,
+};
+
 static void __init a910_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -754,7 +880,8 @@ static void __init a910_init(void)
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
 }
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")
@@ -769,10 +896,39 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E6
+/* gpio_keys */
+static struct gpio_keys_button e6_buttons[] = {
+	[0] = {
+		.code       = KEY_SCREENLOCK,
+		.gpio       = GPIO15_E6_LOCK_SWITCH,
+		.active_low = 0,
+		.desc       = "E6 lock switch",
+		.type       = EV_KEY,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
+	.buttons  = e6_buttons,
+	.nbuttons = ARRAY_SIZE(e6_buttons),
+};
+
+static struct platform_device e6_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &e6_gpio_keys_platform_data,
+	},
+};
+
 static struct i2c_board_info __initdata e6_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *e6_devices[] __initdata = {
+	&e6_gpio_keys,
+};
+
 static void __init e6_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -786,7 +942,8 @@ static void __init e6_init(void)
 
 	pxa_set_keypad_info(&e6_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e6_devices));
 }
 
 MACHINE_START(EZX_E6, "Motorola EZX E6")
@@ -805,6 +962,9 @@ static struct i2c_board_info __initdata e2_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *e2_devices[] __initdata = {
+};
+
 static void __init e2_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -818,7 +978,8 @@ static void __init e2_init(void)
 
 	pxa_set_keypad_info(&e2_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e2_devices));
 }
 
 MACHINE_START(EZX_E2, "Motorola EZX E2")
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
new file mode 100644
index 00000000000..7fff467e84f
--- /dev/null
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -0,0 +1,851 @@
+/*
+ * Support for HP iPAQ hx4700 PDAs.
+ *
+ * Copyright (c) 2008-2009 Philipp Zabel
+ *
+ * Based on code:
+ *    Copyright (c) 2004 Hewlett-Packard Company.
+ *    Copyright (c) 2005 SDG Systems, LLC
+ *    Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/lcd.h>
+#include <linux/mfd/htc-egpio.h>
+#include <linux/mfd/asic3.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/hx4700.h>
+#include <plat/i2c.h>
+#include <mach/irda.h>
+#include <mach/pxa2xx_spi.h>
+
+#include <video/w100fb.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Physical address space information */
+
+#define ATI_W3220_PHYS  PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
+#define ASIC3_PHYS      PXA_CS3_PHYS
+#define ASIC3_SD_PHYS   (PXA_CS3_PHYS + 0x02000000)
+
+static unsigned long hx4700_pin_config[] __initdata = {
+
+	/* SDRAM and Static Memory I/O Signals */
+	GPIO20_nSDCS_2,
+	GPIO21_nSDCS_3,
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,   /* W3220 */
+	GPIO79_nCS_3,   /* ASIC3 */
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,	/* EGPIO, WLAN */
+
+	/* PC CARD */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO85_nPCE_1,
+	GPIO104_PSKTSEL,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* FFUART (RS-232) */
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO36_FFUART_DCD,
+	GPIO37_FFUART_DSR,
+	GPIO38_FFUART_RI,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* PWM 1 (Backlight) */
+	GPIO17_PWM1_OUT,
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO113_I2S_SYSCLK,
+
+	/* SSP 1 (NavPoint) */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP 2 (TSC2046) */
+	GPIO19_SSP2_SCLK,
+	GPIO86_SSP2_RXD,
+	GPIO87_SSP2_TXD,
+	GPIO88_GPIO,
+
+	/* HX4700 specific input GPIOs */
+	GPIO12_GPIO,	/* ASIC3_IRQ */
+	GPIO13_GPIO,	/* W3220_IRQ */
+	GPIO14_GPIO,	/* nWLAN_IRQ */
+
+	GPIO10_GPIO,	/* GSM_IRQ */
+	GPIO13_GPIO,	/* CPLD_IRQ */
+	GPIO107_GPIO,	/* DS1WM_IRQ */
+	GPIO108_GPIO,	/* GSM_READY */
+	GPIO58_GPIO,	/* TSC2046_nPENIRQ */
+	GPIO66_GPIO,	/* nSDIO_IRQ */
+};
+
+#define HX4700_GPIO_IN(num, _desc) \
+	{ .gpio = (num), .dir = 0, .desc = (_desc) }
+#define HX4700_GPIO_OUT(num, _init, _desc) \
+	{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
+struct gpio_ress {
+	unsigned gpio : 8;
+	unsigned dir : 1;
+	unsigned init : 1;
+	char *desc;
+};
+
+static int hx4700_gpio_request(struct gpio_ress *gpios, int size)
+{
+	int i, rc = 0;
+	int gpio;
+	int dir;
+
+	for (i = 0; (!rc) && (i < size); i++) {
+		gpio = gpios[i].gpio;
+		dir = gpios[i].dir;
+		rc = gpio_request(gpio, gpios[i].desc);
+		if (rc) {
+			pr_err("Error requesting GPIO %d(%s) : %d\n",
+			       gpio, gpios[i].desc, rc);
+			continue;
+		}
+		if (dir)
+			gpio_direction_output(gpio, gpios[i].init);
+		else
+			gpio_direction_input(gpio);
+	}
+	while ((rc) && (--i >= 0))
+		gpio_free(gpios[i].gpio);
+	return rc;
+}
+
+/*
+ * IRDA
+ */
+
+static void irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
+}
+
+static struct pxaficp_platform_data ficp_info = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = irda_transceiver_mode,
+};
+
+/*
+ * GPIO Keys
+ */
+
+#define INIT_KEY(_code, _gpio, _active_low, _desc)	\
+	{						\
+		.code       = KEY_##_code,		\
+		.gpio       = _gpio,			\
+		.active_low = _active_low,		\
+		.desc       = _desc,			\
+		.type       = EV_KEY,			\
+		.wakeup     = 1,			\
+	}
+
+static struct gpio_keys_button gpio_keys_buttons[] = {
+	INIT_KEY(POWER,       GPIO0_HX4700_nKEY_POWER,   1, "Power button"),
+	INIT_KEY(MAIL,        GPIO94_HX4700_KEY_MAIL,    0, "Mail button"),
+	INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
+	INIT_KEY(RECORD,      GPIOD6_nKEY_RECORD,        1, "Record button"),
+	INIT_KEY(CALENDAR,    GPIOD1_nKEY_CALENDAR,      1, "Calendar button"),
+	INIT_KEY(HOMEPAGE,    GPIOD3_nKEY_HOME,          1, "Home button"),
+};
+
+static struct gpio_keys_platform_data gpio_keys_data = {
+	.buttons = gpio_keys_buttons,
+	.nbuttons = ARRAY_SIZE(gpio_keys_buttons),
+};
+
+static struct platform_device gpio_keys = {
+	.name = "gpio-keys",
+	.dev  = {
+		.platform_data = &gpio_keys_data,
+	},
+	.id   = -1,
+};
+
+/*
+ * ASIC3
+ */
+
+static u16 asic3_gpio_config[] = {
+	/* ASIC3 GPIO banks A and B along with some of C and D
+	   implement the buffering for the CF slot. */
+	ASIC3_CONFIG_GPIO(0, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(1, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(2, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(3, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(4, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(5, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(6, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(7, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(8, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(9, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(10, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(11, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(12, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(13, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(14, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(15, 1, 1, 0),
+
+	ASIC3_CONFIG_GPIO(16, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(17, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(18, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(19, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(20, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(21, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(22, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(23, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(24, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(25, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(26, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(27, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(28, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(29, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(30, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(31, 1, 1, 0),
+
+	/* GPIOC - CF, LEDs, SD */
+	ASIC3_GPIOC0_LED0,		/* red */
+	ASIC3_GPIOC1_LED1,		/* green */
+	ASIC3_GPIOC2_LED2,		/* blue */
+	ASIC3_GPIOC4_CF_nCD,
+	ASIC3_GPIOC5_nCIOW,
+	ASIC3_GPIOC6_nCIOR,
+	ASIC3_GPIOC7_nPCE_1,
+	ASIC3_GPIOC8_nPCE_2,
+	ASIC3_GPIOC9_nPOE,
+	ASIC3_GPIOC10_nPWE,
+	ASIC3_GPIOC11_PSKTSEL,
+	ASIC3_GPIOC12_nPREG,
+	ASIC3_GPIOC13_nPWAIT,
+	ASIC3_GPIOC14_nPIOIS16,
+	ASIC3_GPIOC15_nPIOR,
+
+	/* GPIOD: input GPIOs, CF */
+	ASIC3_GPIOD11_nCIOIS16,
+	ASIC3_GPIOD12_nCWAIT,
+	ASIC3_GPIOD15_nPIOW,
+};
+
+static struct resource asic3_resources[] = {
+	/* GPIO part */
+	[0] = {
+		.start	= ASIC3_PHYS,
+		.end	= ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+		.end	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* SD part */
+	[2] = {
+		.start	= ASIC3_SD_PHYS,
+		.end	= ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = {
+		.start	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+		.end	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct asic3_platform_data asic3_platform_data = {
+	.gpio_config     = asic3_gpio_config,
+	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
+	.irq_base        = IRQ_BOARD_START,
+	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
+};
+
+static struct platform_device asic3 = {
+	.name          = "asic3",
+	.id            = -1,
+	.resource      = asic3_resources,
+	.num_resources = ARRAY_SIZE(asic3_resources),
+	.dev = {
+		.platform_data = &asic3_platform_data,
+	},
+};
+
+/*
+ * EGPIO
+ */
+
+static struct resource egpio_resources[] = {
+	[0] = {
+		.start = PXA_CS5_PHYS,
+		.end   = PXA_CS5_PHYS + 0x4 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+	[0] = {
+		.reg_start = 0,
+		.gpio_base = HX4700_EGPIO_BASE,
+		.num_gpios = 8,
+		.direction = HTC_EGPIO_OUTPUT,
+	},
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+	.reg_width = 16,
+	.bus_width = 16,
+	.chip      = egpio_chips,
+	.num_chips = ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device egpio = {
+	.name          = "htc-egpio",
+	.id            = -1,
+	.resource      = egpio_resources,
+	.num_resources = ARRAY_SIZE(egpio_resources),
+	.dev = {
+		.platform_data = &egpio_info,
+	},
+};
+
+/*
+ * LCD - Sony display connected to ATI Imageon w3220
+ */
+
+static int lcd_power;
+
+static void sony_lcd_init(void)
+{
+	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
+	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+	mdelay(10);
+	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+	mdelay(20);
+
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
+	mdelay(5);
+	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
+
+	/* FIXME: init w3220 registers here */
+
+	mdelay(5);
+	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
+	mdelay(10);
+	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
+	mdelay(10);
+	gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
+	mdelay(10);
+	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
+}
+
+static void sony_lcd_off(void)
+{
+	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+	mdelay(10);
+	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
+	mdelay(10);
+	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+	mdelay(10);
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+}
+
+static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
+{
+	switch (level) {
+	case FB_BLANK_UNBLANK:
+		sony_lcd_init();
+		break;
+	case FB_BLANK_NORMAL:
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_POWERDOWN:
+		sony_lcd_off();
+		break;
+	}
+	lcd_power = level;
+	return 0;
+}
+
+static int hx4700_lcd_get_power(struct lcd_device *lm)
+{
+	return lcd_power;
+}
+
+static struct lcd_ops hx4700_lcd_ops = {
+	.get_power = hx4700_lcd_get_power,
+	.set_power = hx4700_lcd_set_power,
+};
+
+static struct lcd_device *hx4700_lcd_device;
+
+#ifdef CONFIG_PM
+static void w3220_lcd_suspend(struct w100fb_par *wfb)
+{
+	sony_lcd_off();
+}
+
+static void w3220_lcd_resume(struct w100fb_par *wfb)
+{
+	sony_lcd_init();
+}
+#else
+#define w3220_lcd_resume	NULL
+#define w3220_lcd_suspend	NULL
+#endif
+
+static struct w100_tg_info w3220_tg_info = {
+	.suspend	= w3220_lcd_suspend,
+	.resume		= w3220_lcd_resume,
+};
+
+/*  				 W3220_VGA		QVGA */
+static struct w100_gen_regs w3220_regs = {
+	.lcd_format =        0x00000003,
+	.lcdd_cntl1 =        0x00000000,
+	.lcdd_cntl2 =        0x0003ffff,
+	.genlcd_cntl1 =      0x00abf003,	/* 0x00fff003 */
+	.genlcd_cntl2 =      0x00000003,
+	.genlcd_cntl3 =      0x000102aa,
+};
+
+static struct w100_mode w3220_modes[] = {
+{
+	.xres 		= 480,
+	.yres 		= 640,
+	.left_margin 	= 15,
+	.right_margin 	= 16,
+	.upper_margin 	= 8,
+	.lower_margin 	= 7,
+	.crtc_ss	= 0x00000000,
+	.crtc_ls	= 0xa1ff01f9,	/* 0x21ff01f9 */
+	.crtc_gs	= 0xc0000000,	/* 0x40000000 */
+	.crtc_vpos_gs	= 0x0000028f,
+	.crtc_ps1_active = 0x00000000,	/* 0x41060010 */
+	.crtc_rev	= 0,
+	.crtc_dclk	= 0x80000000,
+	.crtc_gclk	= 0x040a0104,
+	.crtc_goe	= 0,
+	.pll_freq 	= 95,
+	.pixclk_divider = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 0,
+	.sysclk_src     = CLK_SRC_PLL,
+},
+{
+	.xres 		= 240,
+	.yres 		= 320,
+	.left_margin 	= 9,
+	.right_margin 	= 8,
+	.upper_margin 	= 5,
+	.lower_margin 	= 4,
+	.crtc_ss	= 0x80150014,
+	.crtc_ls        = 0xa0fb00f7,
+	.crtc_gs	= 0xc0080007,
+	.crtc_vpos_gs	= 0x00080007,
+	.crtc_rev	= 0x0000000a,
+	.crtc_dclk	= 0x81700030,
+	.crtc_gclk	= 0x8015010f,
+	.crtc_goe	= 0x00000000,
+	.pll_freq 	= 95,
+	.pixclk_divider = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 0,
+	.sysclk_src     = CLK_SRC_PLL,
+},
+};
+
+struct w100_mem_info w3220_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x1a001545,	/* 0x15001545 */
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+struct w100_bm_mem_info w3220_bm_mem_info = {
+	.ext_mem_bw = 0x50413e01,
+	.offset = 0,
+	.ext_timing_ctl = 0x00043f7f,
+	.ext_cntl = 0x00000010,
+	.mode_reg = 0x00250000,
+	.io_cntl = 0x0fff0000,
+	.config = 0x08301480,
+};
+
+static struct w100_gpio_regs w3220_gpio_info = {
+	.init_data1 = 0xdfe00100,	/* GPIO_DATA */
+	.gpio_dir1  = 0xffff0000,	/* GPIO_CNTL1 */
+	.gpio_oe1   = 0x00000000,	/* GPIO_CNTL2 */
+	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
+	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
+	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info w3220_info = {
+	.tg        = &w3220_tg_info,
+	.mem       = &w3220_mem_info,
+	.bm_mem    = &w3220_bm_mem_info,
+	.gpio      = &w3220_gpio_info,
+	.regs      = &w3220_regs,
+	.modelist  = w3220_modes,
+	.num_modes = 2,
+	.xtal_freq = 16000000,
+};
+
+static struct resource w3220_resources[] = {
+	[0] = {
+		.start	= ATI_W3220_PHYS,
+		.end	= ATI_W3220_PHYS + 0x00ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device w3220 = {
+	.name	= "w100fb",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &w3220_info,
+	},
+	.num_resources = ARRAY_SIZE(w3220_resources),
+	.resource      = w3220_resources,
+};
+
+/*
+ * Backlight
+ */
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.pwm_id         = 1,
+	.max_brightness = 200,
+	.dft_brightness = 100,
+	.pwm_period_ns  = 30923,
+};
+
+static struct platform_device backlight = {
+	.name = "pwm-backlight",
+	.id   = -1,
+	.dev  = {
+		.parent        = &pxa27x_device_pwm1.dev,
+		.platform_data = &backlight_data,
+	},
+};
+
+/*
+ * USB "Transceiver"
+ */
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+	.gpio_pullup        = GPIO76_HX4700_USBC_PUEN,
+	.gpio_vbus          = GPIOD14_nUSBC_DETECT,
+	.gpio_vbus_inverted = 1,
+};
+
+static struct platform_device gpio_vbus = {
+	.name          = "gpio-vbus",
+	.id            = -1,
+	.dev = {
+		.platform_data = &gpio_vbus_info,
+	},
+};
+
+/*
+ * Touchscreen - TSC2046 connected to SSP2
+ */
+
+static const struct ads7846_platform_data tsc2046_info = {
+	.model            = 7846,
+	.vref_delay_usecs = 100,
+	.pressure_max     = 512,
+	.debounce_max     = 10,
+	.debounce_tol     = 3,
+	.debounce_rep     = 1,
+	.gpio_pendown     = GPIO58_HX4700_TSC2046_nPENIRQ,
+};
+
+static struct pxa2xx_spi_chip tsc2046_chip = {
+	.tx_threshold = 1,
+	.rx_threshold = 2,
+	.timeout      = 64,
+	.gpio_cs      = GPIO88_HX4700_TSC2046_CS,
+};
+
+static struct spi_board_info tsc2046_board_info[] __initdata = {
+	{
+		.modalias        = "ads7846",
+		.bus_num         = 2,
+		.max_speed_hz    = 2600000, /* 100 kHz sample rate */
+		.irq             = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ),
+		.platform_data   = &tsc2046_info,
+		.controller_data = &tsc2046_chip,
+	},
+};
+
+static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+	.num_chipselect = 1,
+	.clock_enable   = CKEN_SSP2,
+	.enable_dma     = 1,
+};
+
+/*
+ * External power
+ */
+
+static int power_supply_init(struct device *dev)
+{
+	return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
+}
+
+static int hx4700_is_ac_online(void)
+{
+	return !gpio_get_value(GPIOD9_nAC_IN);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIOD9_nAC_IN);
+}
+
+static char *hx4700_supplicants[] = {
+	"ds2760-battery.0", "backup-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = hx4700_is_ac_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = hx4700_supplicants,
+	.num_supplicants = ARRAY_SIZE(hx4700_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+	[0] = {
+		.name  = "ac",
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		         IORESOURCE_IRQ_LOWEDGE,
+		.start = gpio_to_irq(GPIOD9_nAC_IN),
+		.end   = gpio_to_irq(GPIOD9_nAC_IN),
+	},
+	[1] = {
+		.name  = "usb",
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		         IORESOURCE_IRQ_LOWEDGE,
+		.start = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+		.end   = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+	},
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+	.resource      = power_supply_resources,
+	.num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+/*
+ * Battery charger
+ */
+
+static struct regulator_consumer_supply bq24022_consumers[] = {
+	{
+		.dev = &gpio_vbus.dev,
+		.supply = "vbus_draw",
+	},
+	{
+		.dev = &power_supply.dev,
+		.supply = "ac_draw",
+	},
+};
+
+static struct regulator_init_data bq24022_init_data = {
+	.constraints = {
+		.max_uA         = 500000,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
+	.consumer_supplies      = bq24022_consumers,
+};
+
+static struct bq24022_mach_info bq24022_info = {
+	.gpio_nce   = GPIO72_HX4700_BQ24022_nCHARGE_EN,
+	.gpio_iset2 = GPIO96_HX4700_BQ24022_ISET2,
+	.init_data  = &bq24022_init_data,
+};
+
+static struct platform_device bq24022 = {
+	.name = "bq24022",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &bq24022_info,
+	},
+};
+
+/*
+ * StrataFlash
+ */
+
+static void hx4700_set_vpp(struct map_info *map, int vpp)
+{
+	gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
+}
+
+static struct resource strataflash_resource = {
+	.start = PXA_CS0_PHYS,
+	.end   = PXA_CS0_PHYS + SZ_128M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+	.width = 4,
+	.set_vpp = hx4700_set_vpp,
+};
+
+static struct platform_device strataflash = {
+	.name          = "physmap-flash",
+	.id            = -1,
+	.resource      = &strataflash_resource,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &strataflash_data,
+	},
+};
+
+/*
+ * PCMCIA
+ */
+
+static struct platform_device pcmcia = {
+	.name = "hx4700-pcmcia",
+	.dev  = {
+		.parent = &asic3.dev,
+	},
+};
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+	&asic3,
+	&gpio_keys,
+	&backlight,
+	&w3220,
+	&egpio,
+	&bq24022,
+	&gpio_vbus,
+	&power_supply,
+	&strataflash,
+	&pcmcia,
+};
+
+static struct gpio_ress global_gpios[] = {
+	HX4700_GPIO_IN(GPIO12_HX4700_ASIC3_IRQ, "ASIC3_IRQ"),
+	HX4700_GPIO_IN(GPIO13_HX4700_W3220_IRQ, "W3220_IRQ"),
+	HX4700_GPIO_IN(GPIO14_HX4700_nWLAN_IRQ, "WLAN_IRQ"),
+	HX4700_GPIO_OUT(GPIO59_HX4700_LCD_PC1,          1, "LCD_PC1"),
+	HX4700_GPIO_OUT(GPIO62_HX4700_LCD_nRESET,       1, "LCD_RESET"),
+	HX4700_GPIO_OUT(GPIO70_HX4700_LCD_SLIN1,        1, "LCD_SLIN1"),
+	HX4700_GPIO_OUT(GPIO84_HX4700_LCD_SQN,          1, "LCD_SQN"),
+	HX4700_GPIO_OUT(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1, "LCD_LVDD"),
+	HX4700_GPIO_OUT(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1, "LCD_AVDD"),
+	HX4700_GPIO_OUT(GPIO32_HX4700_RS232_ON,         1, "RS232_ON"),
+	HX4700_GPIO_OUT(GPIO71_HX4700_ASIC3_nRESET,     1, "ASIC3_nRESET"),
+	HX4700_GPIO_OUT(GPIO82_HX4700_EUART_RESET,      1, "EUART_RESET"),
+	HX4700_GPIO_OUT(GPIO105_HX4700_nIR_ON,          1, "nIR_EN"),
+};
+
+static void __init hx4700_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
+	hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	pxa_set_ficp_info(&ficp_info);
+	pxa27x_set_i2c_power_info(NULL);
+	pxa_set_i2c_info(NULL);
+	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
+	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
+
+	hx4700_lcd_device = lcd_device_register("w100fb", NULL,
+					(void *)&w3220_info, &hx4700_lcd_ops);
+
+	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
+	mdelay(10);
+	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
+	mdelay(10);
+}
+
+MACHINE_START(H4700, "HP iPAQ HX4700")
+	.phys_io      = 0x40000000,
+	.io_pg_offst  = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params  = 0xa0000100,
+	.map_io       = pxa_map_io,
+	.init_irq     = pxa27x_init_irq,
+	.init_machine = hx4700_init,
+	.timer        = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2b27336c29f..961807dc646 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -22,6 +22,7 @@
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
 #include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -29,7 +30,7 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/udc.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
@@ -102,6 +103,10 @@ static unsigned long imote2_pin_config[] __initdata = {
 	GPIO96_GPIO,	/* accelerometer interrupt */
 	GPIO99_GPIO,	/* ADC interrupt */
 
+	/* SHT15 */
+	GPIO100_GPIO,
+	GPIO98_GPIO,
+
 	/* Connector pins specified as gpios */
 	GPIO94_GPIO, /* large basic connector pin 14 */
 	GPIO10_GPIO, /* large basic connector pin 23 */
@@ -112,6 +117,26 @@ static unsigned long imote2_pin_config[] __initdata = {
 	GPIO105_GPIO, /* blue led */
 };
 
+static struct sht15_platform_data platform_data_sht15 = {
+	.gpio_data =  100,
+	.gpio_sck  =  98,
+};
+
+static struct platform_device sht15 = {
+	.name = "sht15",
+	.id = -1,
+	.dev = {
+		.platform_data = &platform_data_sht15,
+	},
+};
+
+static struct regulator_consumer_supply imote2_sensor_3_con[] = {
+	{
+		.dev = &sht15.dev,
+		.supply = "vcc",
+	},
+};
+
 static struct gpio_led imote2_led_pins[] = {
 	{
 		.name       =  "imote2:red",
@@ -257,6 +282,8 @@ static struct regulator_init_data imote2_ldo_init_data[] = {
 			.min_uV = 2800000,
 			.max_uV = 3000000,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
+		.consumer_supplies = imote2_sensor_3_con,
 	},
 	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
 		.constraints = {
@@ -432,6 +459,9 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
 		.type = "tmp175",
 		.addr = 0x4A,
 		.irq = IRQ_GPIO(96),
+	}, { /* IMB400 Multimedia board */
+		.type = "wm8940",
+		.addr = 0x1A,
 	},
 };
 
@@ -456,25 +486,12 @@ static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
 	.num_chipselect = 1,
 };
 
-/* Patch posted by Eric Miao <eric.miao@marvell.com> will remove
- * the need for these functions.
- */
-static void spi1control(u32 command)
-{
-	gpio_set_value(24, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
-static void spi3control(u32 command)
-{
-	gpio_set_value(39, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
 static struct pxa2xx_spi_chip staccel_chip_info = {
 	.tx_threshold = 8,
 	.rx_threshold = 8,
 	.dma_burst_size = 8,
 	.timeout = 235,
-	.cs_control = spi1control,
+	.gpio_cs = 24,
 };
 
 static struct pxa2xx_spi_chip cc2420_info = {
@@ -482,7 +499,7 @@ static struct pxa2xx_spi_chip cc2420_info = {
 	.rx_threshold = 8,
 	.dma_burst_size = 8,
 	.timeout = 235,
-	.cs_control = spi3control,
+	.gpio_cs = 39,
 };
 
 static struct spi_board_info spi_board_info[] __initdata = {
@@ -521,6 +538,7 @@ static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
 static struct platform_device *imote2_devices[] = {
 	&imote2_flash_device,
 	&imote2_leds,
+	&sht15,
 };
 
 static struct i2c_pxa_platform_data i2c_pwr_pdata = {
@@ -538,8 +556,6 @@ static void __init imote2_init(void)
 	/* SPI chip select directions - all other directions should
 	 * be handled by drivers.*/
 	gpio_direction_output(37, 0);
-	gpio_direction_output(24, 0);
-	gpio_direction_output(39, 0);
 
 	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
 
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
new file mode 100644
index 00000000000..9eaeed1f87f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -0,0 +1,131 @@
+/*
+ * GPIO and IRQ definitions for HP iPAQ hx4700
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _HX4700_H_
+#define _HX4700_H_
+
+#include <linux/gpio.h>
+#include <linux/mfd/asic3.h>
+
+#define HX4700_ASIC3_GPIO_BASE	NR_BUILTIN_GPIO
+#define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_HX4700_nKEY_POWER			0
+#define GPIO12_HX4700_ASIC3_IRQ			12
+#define GPIO13_HX4700_W3220_IRQ			13
+#define GPIO14_HX4700_nWLAN_IRQ			14
+#define GPIO18_HX4700_RDY			18
+#define GPIO22_HX4700_LCD_RL			22
+#define GPIO27_HX4700_CODEC_ON			27
+#define GPIO32_HX4700_RS232_ON			32
+#define GPIO52_HX4700_CPU_nBATT_FAULT		52
+#define GPIO58_HX4700_TSC2046_nPENIRQ		58
+#define GPIO59_HX4700_LCD_PC1			59
+#define GPIO60_HX4700_CF_RNB			60
+#define GPIO61_HX4700_W3220_nRESET		61
+#define GPIO62_HX4700_LCD_nRESET		62
+#define GPIO63_HX4700_CPU_SS_nRESET		63
+#define GPIO65_HX4700_TSC2046_PEN_PU		65
+#define GPIO66_HX4700_ASIC3_nSDIO_IRQ		66
+#define GPIO67_HX4700_EUART_PS			67
+#define GPIO70_HX4700_LCD_SLIN1			70
+#define GPIO71_HX4700_ASIC3_nRESET		71
+#define GPIO72_HX4700_BQ24022_nCHARGE_EN	72
+#define GPIO73_HX4700_LCD_UD_1			73
+#define GPIO75_HX4700_EARPHONE_nDET		75
+#define GPIO76_HX4700_USBC_PUEN			76
+#define GPIO81_HX4700_CPU_GP_nRESET		81
+#define GPIO82_HX4700_EUART_RESET		82
+#define GPIO83_HX4700_WLAN_nRESET		83
+#define GPIO84_HX4700_LCD_SQN			84
+#define GPIO85_HX4700_nPCE1			85
+#define GPIO88_HX4700_TSC2046_CS		88
+#define GPIO91_HX4700_FLASH_VPEN		91
+#define GPIO92_HX4700_HP_DRIVER			92
+#define GPIO93_HX4700_EUART_INT			93
+#define GPIO94_HX4700_KEY_MAIL			94
+#define GPIO95_HX4700_BATT_OFF			95
+#define GPIO96_HX4700_BQ24022_ISET2		96
+#define GPIO97_HX4700_nBL_DETECT		97
+#define GPIO99_HX4700_KEY_CONTACTS		99
+#define GPIO100_HX4700_AUTO_SENSE		100 /* BL auto brightness */
+#define GPIO102_HX4700_SYNAPTICS_POWER_ON	102
+#define GPIO103_HX4700_SYNAPTICS_INT		103
+#define GPIO105_HX4700_nIR_ON			105
+#define GPIO106_HX4700_CPU_BT_nRESET		106
+#define GPIO107_HX4700_SPK_nSD			107
+#define GPIO109_HX4700_CODEC_nPDN		109
+#define GPIO110_HX4700_LCD_LVDD_3V3_ON		110
+#define GPIO111_HX4700_LCD_AVDD_3V3_ON		111
+#define GPIO112_HX4700_LCD_N2V7_7V3_ON		112
+#define GPIO114_HX4700_CF_RESET			114
+#define GPIO116_HX4700_CPU_HW_nRESET		116
+
+/*
+ * ASIC3 GPIOs
+ */
+
+#define GPIOC_BASE		(HX4700_ASIC3_GPIO_BASE + 32)
+#define GPIOD_BASE		(HX4700_ASIC3_GPIO_BASE + 48)
+
+#define GPIOC0_LED_RED		(GPIOC_BASE + 0)
+#define GPIOC1_LED_GREEN	(GPIOC_BASE + 1)
+#define GPIOC2_LED_BLUE		(GPIOC_BASE + 2)
+#define GPIOC3_nSD_CS		(GPIOC_BASE + 3)
+#define GPIOC4_CF_nCD		(GPIOC_BASE + 4)	/* Input */
+#define GPIOC5_nCIOW		(GPIOC_BASE + 5)	/* Output, to CF */
+#define GPIOC6_nCIOR		(GPIOC_BASE + 6)	/* Output, to CF */
+#define GPIOC7_nPCE1		(GPIOC_BASE + 7)	/* Input, from CPU */
+#define GPIOC8_nPCE2		(GPIOC_BASE + 8)	/* Input, from CPU */
+#define GPIOC9_nPOE		(GPIOC_BASE + 9)	/* Input, from CPU */
+#define GPIOC10_CF_nPWE		(GPIOC_BASE + 10)	/* Input */
+#define GPIOC11_PSKTSEL		(GPIOC_BASE + 11)	/* Input, from CPU */
+#define GPIOC12_nPREG		(GPIOC_BASE + 12)	/* Input, from CPU */
+#define GPIOC13_nPWAIT		(GPIOC_BASE + 13)	/* Output, to CPU */
+#define GPIOC14_nPIOIS16	(GPIOC_BASE + 14)	/* Output, to CPU */
+#define GPIOC15_nPIOR		(GPIOC_BASE + 15)	/* Input, from CPU */
+
+#define GPIOD0_CPU_SS_INT	(GPIOD_BASE + 0)	/* Input */
+#define GPIOD1_nKEY_CALENDAR	(GPIOD_BASE + 1)
+#define GPIOD2_BLUETOOTH_WAKEUP	(GPIOD_BASE + 2)
+#define GPIOD3_nKEY_HOME	(GPIOD_BASE + 3)
+#define GPIOD4_CF_nCD		(GPIOD_BASE + 4)	/* Input, from CF */
+#define GPIOD5_nPIO		(GPIOD_BASE + 5)	/* Input */
+#define GPIOD6_nKEY_RECORD	(GPIOD_BASE + 6)
+#define GPIOD7_nSDIO_DETECT	(GPIOD_BASE + 7)
+#define GPIOD8_COM_DCD		(GPIOD_BASE + 8)	/* Input */
+#define GPIOD9_nAC_IN		(GPIOD_BASE + 9)
+#define GPIOD10_nSDIO_IRQ	(GPIOD_BASE + 10)	/* Input */
+#define GPIOD11_nCIOIS16	(GPIOD_BASE + 11)	/* Input, from CF */
+#define GPIOD12_nCWAIT		(GPIOD_BASE + 12)	/* Input, from CF */
+#define GPIOD13_CF_RNB		(GPIOD_BASE + 13)	/* Input */
+#define GPIOD14_nUSBC_DETECT	(GPIOD_BASE + 14)
+#define GPIOD15_nPIOW		(GPIOD_BASE + 15)	/* Input, from CPU */
+
+/*
+ * EGPIOs
+ */
+
+#define EGPIO0_VCC_3V3_EN	(HX4700_EGPIO_BASE + 0)	/* WLAN support chip */
+#define EGPIO1_WL_VREG_EN	(HX4700_EGPIO_BASE + 1)	/* WLAN power */
+#define EGPIO2_VCC_2V1_WL_EN	(HX4700_EGPIO_BASE + 2)	/* unused */
+#define EGPIO3_SS_PWR_ON	(HX4700_EGPIO_BASE + 3)	/* smart slot power */
+#define EGPIO4_CF_3V3_ON	(HX4700_EGPIO_BASE + 4)	/* CF 3.3V enable */
+#define EGPIO5_BT_3V3_ON	(HX4700_EGPIO_BASE + 5)	/* BT 3.3V enable */
+#define EGPIO6_WL1V8_EN		(HX4700_EGPIO_BASE + 6)	/* WLAN 1.8V enable */
+#define EGPIO7_VCC_3V3_WL_EN	(HX4700_EGPIO_BASE + 7)	/* WLAN 3.3V enable */
+#define EGPIO8_USB_3V3_ON	(HX4700_EGPIO_BASE + 8)	/* unused */
+
+#endif /* _HX4700_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 32bb4a2eb7f..6a1d9599334 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -91,13 +91,23 @@
 #define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
 
 /*
- * The next 16 interrupts are for board specific purposes.  Since
+ * The following interrupts are for board specific purposes. Since
  * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.
+ * these.  There will be 16 IRQs by default.  If it is not enough,
+ * IRQ_BOARD_END is allowed be customized for each board, but keep
+ * the numbers within sensible limits and in descending order, so
+ * when multiple config options are selected, the maximum will be
+ * used.
  */
 #define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+
+#if defined(CONFIG_MACH_H4700)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 70)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 32)
+#else
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
+#endif
 
 #define IRQ_SA1111_START	(IRQ_BOARD_END)
 #define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
@@ -188,8 +198,6 @@
 #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
 #elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
 #define NR_IRQS			(IRQ_BOARD_END)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define NR_IRQS			(IRQ_BOARD_START + 32)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 07897e61d05..3ce4682eabb 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -283,6 +283,9 @@
 #define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
 #define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
 #define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO75_UART1_RXD	MFP_CFG_LPM(GPIO75, AF1, FLOAT)
+#define GPIO76_UART1_RXD	MFP_CFG_LPM(GPIO76, AF3, FLOAT)
+#define GPIO76_UART1_TXD	MFP_CFG_LPM(GPIO76, AF1, FLOAT)
 #define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
 #define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
 #define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
@@ -291,6 +294,9 @@
 #define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
 #define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
 #define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO77_UART1_CTS	MFP_CFG_LPM(GPIO77, AF1, FLOAT)
+#define GPIO82_UART1_RTS	MFP_CFG_LPM(GPIO82, AF1, FLOAT)
+#define GPIO82_UART1_CTS	MFP_CFG_LPM(GPIO82, AF3, FLOAT)
 #define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
 #define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
 #define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
@@ -299,13 +305,18 @@
 #define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
 #define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
 #define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO79_UART1_DSR	MFP_CFG_LPM(GPIO79, AF1, FLOAT)
+#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81, AF1, FLOAT)
+#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81, AF3, FLOAT)
 #define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
 #define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
 #define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
 #define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
 #define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO78_UART1_DCD	MFP_CFG_LPM(GPIO78, AF1, FLOAT)
 #define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
 #define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO80_UART1_RI		MFP_CFG_LPM(GPIO80, AF1, FLOAT)
 #define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
 
 /* UART2 */
@@ -438,6 +449,9 @@
 
 #define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
 #define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
+#define GPIO6_NPIOW		MFP_CFG(GPIO6, AF3)
+#define GPIO7_NPIOS16		MFP_CFG(GPIO7, AF3)
+#define GPIO8_NPWAIT		MFP_CFG(GPIO8, AF3)
 
 #define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
 #define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index fb13c82ad6d..8721b801022 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -56,7 +56,6 @@
 #define GPIO_NR_PALMLD_LED_AMBER	94
 
 /* IDE */
-#define GPIO_NR_PALMLD_IDE_IRQ		95
 #define GPIO_NR_PALMLD_IDE_RESET	98
 #define GPIO_NR_PALMLD_IDE_PWEN		115
 
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index a6eeef8a075..fd8360c6839 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -27,6 +27,8 @@ extern void pxa27x_cpu_suspend(unsigned int);
 extern void pxa_cpu_resume(void);
 
 extern int pxa_pm_enter(suspend_state_t state);
+extern int pxa_pm_prepare(void);
+extern void pxa_pm_finish(void);
 
 /* NOTE: this is for PM debugging on Lubbock,  it's really a big
  * ugly, but let's keep the crap minimum here, instead of direct
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
index 6876e16c297..0b702693f45 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -16,4 +16,7 @@
 #define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
 #define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
 #define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
+
+extern int __init pxa27x_set_pwrmode(unsigned int mode);
+
 #endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/include/asm/hardware/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
index 2d00db22b98..1920dc6b05d 100644
--- a/arch/arm/include/asm/hardware/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  *
  */
-
-#include <linux/interrupt.h>
+#ifndef _MACH_SHARPSL_PM
+#define _MACH_SHARPSL_PM
 
 struct sharpsl_charger_machinfo {
 	void (*init)(void);
@@ -100,7 +100,5 @@ extern struct sharpsl_pm_status sharpsl_pm;
 
 void sharpsl_battery_kick(void);
 void sharpsl_pm_led(int val);
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
 
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 5706cea95d1..b54749413e9 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -36,7 +36,8 @@ static inline void flush(void)
 static inline void arch_decomp_setup(void)
 {
 	if (machine_is_littleton() || machine_is_intelmote2()
-			|| machine_is_csb726())
+	    || machine_is_csb726() || machine_is_stargate2()
+	    || machine_is_cm_x300())
 		UART = STUART;
 }
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index c872b9feb4d..55b3788fd1a 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -42,14 +42,17 @@
 #include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
+#include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
 
 #include "generic.h"
 
+#define GPIO_MMC1_CARD_DETECT	mfp_to_gpio(MFP_PIN_GPIO15)
+
 /* Littleton MFP configurations */
 static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	/* LCD */
@@ -98,6 +101,15 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	GPIO123_KP_MKOUT_2,
 	GPIO124_KP_MKOUT_3,
 	GPIO125_KP_MKOUT_4,
+
+	/* MMC1 */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+	GPIO15_GPIO, /* card detect */
 };
 
 static struct resource smc91x_resources[] = {
@@ -179,15 +191,10 @@ static struct pxa2xx_spi_master littleton_spi_info = {
 	.num_chipselect		= 1,
 };
 
-static void littleton_tdo24m_cs(u32 cmd)
-{
-	gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
 	.rx_threshold	= 1,
 	.tx_threshold	= 1,
-	.cs_control	= littleton_tdo24m_cs,
+	.gpio_cs	= LITTLETON_GPIO_LCD_CS,
 };
 
 static struct spi_board_info littleton_spi_devices[] __initdata = {
@@ -202,16 +209,6 @@ static struct spi_board_info littleton_spi_devices[] __initdata = {
 
 static void __init littleton_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
-	if (err) {
-		pr_warning("failed to request GPIO for LCS CS\n");
-		return;
-	}
-
-	gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
-
 	pxa2xx_set_spi_info(2, &littleton_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
 }
@@ -267,6 +264,56 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static int littleton_mci_init(struct device *dev,
+			      irq_handler_t littleton_detect_int, void *data)
+{
+	int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
+
+	err = gpio_request(gpio_cd, "mmc card detect");
+	if (err)
+		goto err_request_cd;
+
+	gpio_direction_input(gpio_cd);
+
+	err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  "mmc card detect", data);
+	if (err) {
+		dev_err(dev, "failed to request card detect IRQ\n");
+		goto err_request_irq;
+	}
+	return 0;
+
+err_request_irq:
+	gpio_free(gpio_cd);
+err_request_cd:
+	return err;
+}
+
+static void littleton_mci_exit(struct device *dev, void *data)
+{
+	int gpio_cd = GPIO_MMC1_CARD_DETECT;
+
+	free_irq(gpio_to_irq(gpio_cd), data);
+	gpio_free(gpio_cd);
+}
+
+static struct pxamci_platform_data littleton_mci_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init 		= littleton_mci_init,
+	.exit		= littleton_mci_exit,
+};
+
+static void __init littleton_init_mmc(void)
+{
+	pxa_set_mci_info(&littleton_mci_platform_data);
+}
+#else
+static inline void littleton_init_mmc(void) {}
+#endif
+
 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 static struct mtd_partition littleton_nand_partitions[] = {
 	[0] = {
@@ -407,6 +454,7 @@ static void __init littleton_init(void)
 
 	littleton_init_spi();
 	littleton_init_i2c();
+	littleton_init_mmc();
 	littleton_init_lcd();
 	littleton_init_keypad();
 	littleton_init_nand();
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index c899bbd94dc..ca39669cffc 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -36,7 +36,7 @@
 #include <mach/pxa27x.h>
 #include <mach/magician.h>
 #include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
@@ -745,6 +745,14 @@ static struct platform_device strataflash = {
 };
 
 /*
+ * I2C
+ */
+
+static struct i2c_pxa_platform_data i2c_info = {
+	.fast_mode = 1,
+};
+
+/*
  * Platform devices
  */
 
@@ -771,7 +779,7 @@ static void __init magician_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(devices));
 
 	err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
 	if (!err) {
@@ -779,7 +787,7 @@ static void __init magician_init(void)
 		pxa_set_ficp_info(&magician_ficp_info);
 	}
 	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_i2c_info(NULL);
+	pxa_set_i2c_info(&i2c_info);
 	pxa_set_mci_info(&magician_mci_info);
 	pxa_set_ohci_info(&magician_ohci_info);
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a6c8429e975..f4dabf0273c 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -46,7 +46,7 @@
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index ff8052ce0a0..4dc8c2ec40a 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -48,7 +48,7 @@
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
 #include <media/soc_camera.h>
@@ -798,7 +798,7 @@ static void mioa701_restart(char c, const char *cmd)
 	arm_machine_restart('s', cmd);
 }
 
-struct gpio_ress global_gpios[] = {
+static struct gpio_ress global_gpios[] = {
 	MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
 	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
 	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 471a853e548..ed70f281dd0 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -129,7 +129,7 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO81_GPIO,	/* wifi reset */
 
 	/* HDD */
-	GPIO95_GPIO,	/* HDD irq */
+	GPIO98_GPIO,	/* HDD reset */
 	GPIO115_GPIO,	/* HDD power */
 
 	/* MISC */
@@ -496,6 +496,14 @@ static struct platform_device palmld_asoc = {
 };
 
 /******************************************************************************
+ * HDD
+ ******************************************************************************/
+static struct platform_device palmld_hdd = {
+	.name	= "pata_palmld",
+	.id	= -1,
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmld_lcd_modes[] = {
@@ -524,30 +532,18 @@ static struct pxafb_mach_info palmld_lcd_screen = {
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
-	0xe3a00101,	/* mov	r0,	#0x40000000 */
-	0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-	0xe590f008,	/* ldr	pc, [r0, #0x08] */
-};
-
-static int __init palmld_pm_init(void)
+static void __init palmld_pm_init(void)
 {
-	int i;
-
-	/* this is where the bootloader jumps */
-	addr = phys_to_virt(PALMLD_STR_BASE);
-
-	for (i = 0; i < 3; i++)
-		addr[i] = resume[i];
-
-	return 0;
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* copy the bootloader */
+	memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume));
 }
 
-device_initcall(palmld_pm_init);
-#endif
-
 /******************************************************************************
  * Machine init
  ******************************************************************************/
@@ -559,6 +555,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmld_leds,
 	&power_supply,
 	&palmld_asoc,
+	&palmld_hdd,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {
@@ -586,6 +583,7 @@ static void __init palmld_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
 
+	palmld_pm_init();
 	set_pxa_fb_info(&palmld_lcd_screen);
 	pxa_set_mci_info(&palmld_mci_platform_data);
 	pxa_set_ac97_info(&palmld_ac97_pdata);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 05bf979b78a..aae64a12a73 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -26,6 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -343,11 +344,18 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmt5_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMT5_USB_PULLUP,
-	.gpio_pullup_inverted	= 0,
+};
+
+static struct platform_device palmt5_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmt5_udc_info,
+	},
 };
 
 /******************************************************************************
@@ -466,30 +474,18 @@ static struct pxafb_mach_info palmt5_lcd_screen = {
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
-	0xe3a00101,	/* mov	r0,	#0x40000000 */
-	0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-	0xe590f008,	/* ldr	pc, [r0, #0x08] */
-};
-
-static int __init palmt5_pm_init(void)
+static void __init palmt5_pm_init(void)
 {
-	int i;
-
-	/* this is where the bootloader jumps */
-	addr = phys_to_virt(PALMT5_STR_BASE);
-
-	for (i = 0; i < 3; i++)
-		addr[i] = resume[i];
-
-	return 0;
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* copy the bootloader */
+	memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume));
 }
 
-device_initcall(palmt5_pm_init);
-#endif
-
 /******************************************************************************
  * Machine init
  ******************************************************************************/
@@ -500,6 +496,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmt5_backlight,
 	&power_supply,
 	&palmt5_asoc,
+	&palmt5_gpio_vbus,
 };
 
 /* setup udc GPIOs initial state */
@@ -515,14 +512,15 @@ static void __init palmt5_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
 
+	palmt5_pm_init();
 	set_pxa_fb_info(&palmt5_lcd_screen);
 	pxa_set_mci_info(&palmt5_mci_platform_data);
 	palmt5_udc_init();
 	pxa_set_ac97_info(&palmt5_ac97_pdata);
-	pxa_set_udc_info(&palmt5_udc_info);
 	pxa_set_ficp_info(&palmt5_ficp_platform_data);
 	pxa_set_keypad_info(&palmt5_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 43fcf2e8688..d823b09801d 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -37,6 +38,7 @@
 #include <mach/mfp-pxa25x.h>
 #include <mach/irda.h>
 #include <mach/udc.h>
+#include <mach/palmasoc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -107,6 +109,7 @@ static unsigned long palmte2_pin_config[] __initdata = {
 	GPIO1_RST,	/* reset */
 	GPIO4_GPIO,	/* Hotsync button */
 	GPIO9_GPIO,	/* power detect */
+	GPIO15_GPIO,	/* earphone detect */
 	GPIO37_GPIO,	/* LCD power */
 	GPIO56_GPIO,	/* Backlight power */
 };
@@ -318,11 +321,18 @@ static struct pxaficp_platform_data palmte2_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmte2_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTE2_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMTE2_USB_PULLUP,
-	.gpio_pullup_inverted	= 0,
+};
+
+static struct platform_device palmte2_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmte2_udc_info,
+	},
 };
 
 /******************************************************************************
@@ -395,6 +405,21 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 };
 
 /******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmte2_asoc_pdata = {
+	.jack_gpio	= GPIO_NR_PALMTE2_EARPHONE_DETECT,
+};
+
+static struct platform_device palmte2_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmte2_asoc_pdata,
+	},
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmte2_lcd_modes[] = {
@@ -429,6 +454,8 @@ static struct platform_device *devices[] __initdata = {
 #endif
 	&palmte2_backlight,
 	&power_supply,
+	&palmte2_asoc,
+	&palmte2_gpio_vbus,
 };
 
 /* setup udc GPIOs initial state */
@@ -447,7 +474,6 @@ static void __init palmte2_init(void)
 	set_pxa_fb_info(&palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
-	pxa_set_udc_info(&palmte2_udc_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmte2_ficp_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index e99a893c58a..6c15d84bde5 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -359,11 +360,18 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmtx_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMTX_USB_PULLUP,
-	.gpio_pullup_inverted	= 0,
+};
+
+static struct platform_device palmtx_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmtx_udc_info,
+	},
 };
 
 /******************************************************************************
@@ -483,30 +491,18 @@ static struct pxafb_mach_info palmtx_lcd_screen = {
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
-	0xe3a00101,	/* mov	r0,	#0x40000000 */
-	0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-	0xe590f008,	/* ldr	pc, [r0, #0x08] */
-};
-
-static int __init palmtx_pm_init(void)
+static void __init palmtx_pm_init(void)
 {
-	int i;
-
-	/* this is where the bootloader jumps */
-	addr = phys_to_virt(PALMTX_STR_BASE);
-
-	for (i = 0; i < 3; i++)
-		addr[i] = resume[i];
-
-	return 0;
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* copy the bootloader */
+	memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume));
 }
 
-device_initcall(palmtx_pm_init);
-#endif
-
 /******************************************************************************
  * Machine init
  ******************************************************************************/
@@ -517,6 +513,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmtx_backlight,
 	&power_supply,
 	&palmtx_asoc,
+	&palmtx_gpio_vbus,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
@@ -548,11 +545,11 @@ static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
+	palmtx_pm_init();
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
 	palmtx_udc_init();
 	pxa_set_ac97_info(&palmtx_ac97_pdata);
-	pxa_set_udc_info(&palmtx_udc_info);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
 	pxa_set_keypad_info(&palmtx_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6c12b5a3132..095521e9ee2 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -28,7 +28,7 @@
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <asm/mach/map.h>
 #include <mach/pxa27x.h>
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 884b174c8ea..7693355ee63 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -79,7 +79,7 @@ static int pxa_pm_valid(suspend_state_t state)
 	return -EINVAL;
 }
 
-static int pxa_pm_prepare(void)
+int pxa_pm_prepare(void)
 {
 	int ret = 0;
 
@@ -89,7 +89,7 @@ static int pxa_pm_prepare(void)
 	return ret;
 }
 
-static void pxa_pm_finish(void)
+void pxa_pm_finish(void)
 {
 	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
 		pxa_cpu_pm_fns->finish();
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 036bbde4d22..ac431ed1039 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -39,7 +39,7 @@
 #include <mach/pxa25x.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
@@ -214,13 +214,8 @@ static struct ads7846_platform_data poodle_ads7846_info = {
 	.gpio_pendown		= POODLE_GPIO_TP_INT,
 };
 
-static void ads7846_cs(u32 command)
-{
-	gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip poodle_ads7846_chip = {
-	.cs_control		= ads7846_cs,
+	.gpio_cs		= POODLE_GPIO_TP_CS,
 };
 
 static struct spi_board_info poodle_spi_devices[] = {
@@ -236,14 +231,6 @@ static struct spi_board_info poodle_spi_devices[] = {
 
 static void __init poodle_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	gpio_direction_output(POODLE_GPIO_TP_CS, 1);
-
 	pxa2xx_set_spi_info(1, &poodle_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index a425ec71e65..ec68cc16b4e 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -27,7 +27,7 @@
 #include <mach/ohci.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -204,6 +204,23 @@ static struct clk_lookup pxa27x_clkregs[] = {
 #define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
 
 /*
+ * allow platforms to override default PWRMODE setting used for PM_SUSPEND_MEM
+ */
+static unsigned int pwrmode = PWRMODE_SLEEP;
+
+int __init pxa27x_set_pwrmode(unsigned int mode)
+{
+	switch (mode) {
+	case PWRMODE_SLEEP:
+	case PWRMODE_DEEPSLEEP:
+		pwrmode = mode;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/*
  * List of global PXA peripheral registers to preserve.
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
@@ -254,7 +271,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 		pxa_cpu_standby();
 		break;
 	case PM_SUSPEND_MEM:
-		pxa27x_cpu_suspend(PWRMODE_SLEEP);
+		pxa27x_cpu_suspend(pwrmode);
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b02d4544dc9..6f678d93bf4 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,7 +30,7 @@
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/ssp.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -552,7 +552,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 }
 
 static struct platform_device *devices[] __initdata = {
-/*	&pxa_device_udc,	The UDC driver is PXA25x only */
+	&pxa27x_device_udc,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index ff823999143..8241a63ea58 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -27,7 +27,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/pxa930.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/pxafb.h>
 
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 047909a7665..55259f4756c 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -7,7 +7,7 @@
  *
  */
 
-#include <asm/hardware/sharpsl_pm.h>
+#include <mach/sharpsl_pm.h>
 
 /*
  * SharpSL SSP Driver
@@ -44,8 +44,6 @@ void corgi_lcdtg_hw_init(int mode);
 
 extern struct battery_thresh spitz_battery_levels_acin[];
 extern struct battery_thresh spitz_battery_levels_noac[];
-void sharpsl_pm_pxa_init(void);
-void sharpsl_pm_pxa_remove(void);
 int sharpsl_pm_pxa_read_max1111(int channel);
 
 
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 16b4ec67e3b..2546c066cd6 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -15,20 +15,69 @@
 #undef DEBUG
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/suspend.h>
+#include <linux/gpio.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/pm.h>
+#include <mach/pxa2xx-regs.h>
 #include <mach/pxa2xx-gpio.h>
+#include <mach/regs-rtc.h>
 #include <mach/sharpsl.h>
+#include <mach/sharpsl_pm.h>
+
 #include "sharpsl.h"
 
+/*
+ * Constants
+ */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
+#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
+#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
+#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
+
+#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
+#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
+#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
+#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
+#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
+
+/*
+ * Prototypes
+ */
+#ifdef CONFIG_PM
+static int sharpsl_off_charge_battery(void);
+static int sharpsl_check_battery_voltage(void);
+static int sharpsl_fatal_check(void);
+#endif
+static int sharpsl_check_battery_temp(void);
+static int sharpsl_ac_check(void);
+static int sharpsl_average_value(int ad);
+static void sharpsl_average_clear(void);
+static void sharpsl_charge_toggle(struct work_struct *private_);
+static void sharpsl_battery_thread(struct work_struct *private_);
+
+
+/*
+ * Variables
+ */
+struct sharpsl_pm_status sharpsl_pm;
+static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
+static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
+DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
+
+
+
 struct battery_thresh spitz_battery_levels_acin[] = {
 	{ 213, 100},
 	{ 212,  98},
@@ -144,42 +193,789 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 #endif
 }
 
-void sharpsl_pm_pxa_init(void)
+static int get_percentage(int voltage)
+{
+	int i = sharpsl_pm.machinfo->bat_levels - 1;
+	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
+	struct battery_thresh *thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
+	else
+		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
+
+	while (i > 0 && (voltage > thresh[i].voltage))
+		i--;
+
+	return thresh[i].percentage;
+}
+
+static int get_apm_status(int voltage)
+{
+	int low_thresh, high_thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON) {
+		high_thresh = sharpsl_pm.machinfo->status_high_acin;
+		low_thresh = sharpsl_pm.machinfo->status_low_acin;
+	} else {
+		high_thresh = sharpsl_pm.machinfo->status_high_noac;
+		low_thresh = sharpsl_pm.machinfo->status_low_noac;
+	}
+
+	if (voltage >= high_thresh)
+		return APM_BATTERY_STATUS_HIGH;
+	if (voltage >= low_thresh)
+		return APM_BATTERY_STATUS_LOW;
+	return APM_BATTERY_STATUS_CRITICAL;
+}
+
+void sharpsl_battery_kick(void)
+{
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
+}
+EXPORT_SYMBOL(sharpsl_battery_kick);
+
+
+static void sharpsl_battery_thread(struct work_struct *private_)
+{
+	int voltage, percent, apm_status, i = 0;
+
+	if (!sharpsl_pm.machinfo)
+		return;
+
+	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
+
+	/* Corgi cannot confirm when battery fully charged so periodically kick! */
+	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
+			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
+		schedule_delayed_work(&toggle_charger, 0);
+
+	while(1) {
+		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+
+		if (voltage > 0) break;
+		if (i++ > 5) {
+			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+			break;
+		}
+	}
+
+	voltage = sharpsl_average_value(voltage);
+	apm_status = get_apm_status(voltage);
+	percent = get_percentage(voltage);
+
+	/* At low battery voltages, the voltage has a tendency to start
+           creeping back up so we try to avoid this here */
+	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
+		sharpsl_pm.battstat.mainbat_voltage = voltage;
+		sharpsl_pm.battstat.mainbat_status = apm_status;
+		sharpsl_pm.battstat.mainbat_percent = percent;
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
+			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
+
+#ifdef CONFIG_BACKLIGHT_CORGI
+	/* If battery is low. limit backlight intensity to save power. */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
+			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
+			sharpsl_pm.machinfo->backlight_limit(1);
+			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
+		}
+	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
+		sharpsl_pm.machinfo->backlight_limit(0);
+		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
+	}
+#endif
+
+	/* Suspend if critical battery level */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		dev_err(sharpsl_pm.dev, "Fatal Off\n");
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
+}
+
+void sharpsl_pm_led(int val)
+{
+	if (val == SHARPSL_LED_ERROR) {
+		dev_err(sharpsl_pm.dev, "Charging Error!\n");
+	} else if (val == SHARPSL_LED_ON) {
+		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
+		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
+		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
+	}
+}
+
+static void sharpsl_charge_on(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
+
+	sharpsl_pm.full_count = 0;
+	sharpsl_pm.charge_mode = CHRG_ON;
+	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
+}
+
+static void sharpsl_charge_off(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
+
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm_led(SHARPSL_LED_OFF);
+	sharpsl_pm.charge_mode = CHRG_OFF;
+
+	schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+static void sharpsl_charge_error(void)
 {
-	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
-	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
-	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
+	sharpsl_pm_led(SHARPSL_LED_ERROR);
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+}
+
+static void sharpsl_charge_toggle(struct work_struct *private_)
+{
+	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+		sharpsl_charge_off();
+		return;
+	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
+		sharpsl_charge_error();
+		return;
+	}
+
+	sharpsl_pm_led(SHARPSL_LED_ON);
+	sharpsl_pm.machinfo->charge(0);
+	mdelay(SHARPSL_CHARGE_WAIT_TIME);
+	sharpsl_pm.machinfo->charge(1);
+
+	sharpsl_pm.charge_start_time = jiffies;
+}
+
+static void sharpsl_ac_timer(unsigned long data)
+{
+	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+
+	sharpsl_average_clear();
+	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
+		sharpsl_charge_on();
+	else if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_charge_off();
+
+	schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+
+static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
+{
+	/* Delay the event slightly to debounce */
+	/* Must be a smaller delay than the chrg_full_isr below */
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return IRQ_HANDLED;
+}
+
+static void sharpsl_chrg_full_timer(unsigned long data)
+{
+	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
+
+	sharpsl_pm.full_count++;
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
+		if (sharpsl_pm.charge_mode == CHRG_ON)
+			sharpsl_charge_off();
+	} else if (sharpsl_pm.full_count < 2) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
+		schedule_delayed_work(&toggle_charger, 0);
+	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
+		schedule_delayed_work(&toggle_charger, 0);
+	} else {
+		sharpsl_charge_off();
+		sharpsl_pm.charge_mode = CHRG_DONE;
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
+	}
+}
+
+/* Charging Finished Interrupt (Not present on Corgi) */
+/* Can trigger at the same time as an AC status change so
+   delay until after that has been processed */
+static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
+{
+	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
+		return IRQ_HANDLED;
+
+	/* delay until after any ac interrupt */
+	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
+{
+	int is_fatal = 0;
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
+		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
+		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Maintain an average of the last 10 readings
+ */
+#define SHARPSL_CNV_VALUE_NUM    10
+static int sharpsl_ad_index;
+
+static void sharpsl_average_clear(void)
+{
+	sharpsl_ad_index = 0;
+}
+
+static int sharpsl_average_value(int ad)
+{
+	int i, ad_val = 0;
+	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
+
+	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
+		sharpsl_ad_index = 0;
+		return ad;
+	}
+
+	sharpsl_ad[sharpsl_ad_index] = ad;
+	sharpsl_ad_index++;
+	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
+		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+			sharpsl_ad[i] = sharpsl_ad[i+1];
+		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
+	}
+	for (i=0; i < sharpsl_ad_index; i++)
+		ad_val += sharpsl_ad[i];
+
+	return (ad_val / sharpsl_ad_index);
+}
+
+/*
+ * Take an array of 5 integers, remove the maximum and minimum values
+ * and return the average.
+ */
+static int get_select_val(int *val)
+{
+	int i, j, k, temp, sum = 0;
+
+	/* Find MAX val */
+	temp = val[0];
+	j=0;
+	for (i=1; i<5; i++) {
+		if (temp < val[i]) {
+			temp = val[i];
+			j = i;
+		}
+	}
+
+	/* Find MIN val */
+	temp = val[4];
+	k=4;
+	for (i=3; i>=0; i--) {
+		if (temp > val[i]) {
+			temp = val[i];
+			k = i;
+		}
+	}
+
+	for (i=0; i<5; i++)
+		if (i != j && i != k )
+			sum += val[i];
+
+	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
+
+	return (sum/3);
+}
+
+static int sharpsl_check_battery_temp(void)
+{
+	int val, i, buff[5];
+
+	/* Check battery temperature */
+	for (i=0; i<5; i++) {
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+		sharpsl_pm.machinfo->measure_temp(1);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
+		sharpsl_pm.machinfo->measure_temp(0);
+	}
+
+	val = get_select_val(buff);
+
+	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
+	if (val > sharpsl_pm.machinfo->charge_on_temp) {
+		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_check_battery_voltage(void)
+{
+	int val, i, buff[5];
+
+	/* disable charge, enable discharge */
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm.machinfo->discharge(1);
+	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery voltage */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	sharpsl_pm.machinfo->discharge(0);
+
+	val = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
+
+	if (val < sharpsl_pm.machinfo->charge_on_volt)
+		return -1;
+
+	return 0;
+}
+#endif
+
+static int sharpsl_ac_check(void)
+{
+	int temp, i, buff[5];
+
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+
+	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
+		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
+	flush_scheduled_work();
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+	else
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+
+	return 0;
+}
+
+static int sharpsl_pm_resume(struct platform_device *pdev)
+{
+	/* Clear the reset source indicators as they break the bootloader upon reboot */
+	RCSR = 0x0f;
+	sharpsl_average_clear();
+	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
+	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
+
+	return 0;
+}
+
+static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+	/* not charging and AC-IN! */
+
+	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
+		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
+		sharpsl_pm.charge_mode = CHRG_OFF;
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+		sharpsl_off_charge_battery();
+	}
+
+	sharpsl_pm.machinfo->presuspend();
+
+	PEDR = 0xffffffff; /* clear it */
+
+	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
+	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
+		RTSR &= RTSR_ALE;
+		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
+		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
+	} else if (alarm_enable) {
+		RTSR &= RTSR_ALE;
+		RTAR = alarm_time;
+		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
+	}
+
+	pxa_pm_enter(state);
+
+	sharpsl_pm.machinfo->postsuspend();
+
+	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+}
+
+static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
+	{
+		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
+			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		if(sharpsl_off_charge_battery()) {
+			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
+	}
+
+	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
+	{
+		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
+		corgi_goto_sleep(alarm_time, alarm_enable, state);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int corgi_pxa_pm_enter(suspend_state_t state)
+{
+	unsigned long alarm_time = RTAR;
+	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
+
+	corgi_goto_sleep(alarm_time, alarm_status, state);
+
+	while (corgi_enter_suspend(alarm_time,alarm_status,state))
+		{}
+
+	if (sharpsl_pm.machinfo->earlyresume)
+		sharpsl_pm.machinfo->earlyresume();
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
+
+	return 0;
+}
+
+/*
+ * Check for fatal battery errors
+ * Fatal returns -1
+ */
+static int sharpsl_fatal_check(void)
+{
+	int buff[5], temp, i, acin;
+
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
+
+	/* Check AC-Adapter */
+	acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		sharpsl_pm.machinfo->charge(0);
+		udelay(100);
+		sharpsl_pm.machinfo->discharge(1);	/* enable discharge */
+		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery : check inserting battery ? */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		udelay(100);
+		sharpsl_pm.machinfo->charge(1);
+		sharpsl_pm.machinfo->discharge(0);
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
+
+	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
+			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
+		return -1;
+	return 0;
+}
+
+static int sharpsl_off_charge_error(void)
+{
+	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm_led(SHARPSL_LED_ERROR);
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+	return 1;
+}
+
+/*
+ * Charging Control while suspended
+ * Return 1 - go straight to sleep
+ * Return 0 - sleep or wakeup depending on other factors
+ */
+static int sharpsl_off_charge_battery(void)
+{
+	int time;
+
+	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
+
+	if (sharpsl_pm.charge_mode == CHRG_OFF) {
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+		/* AC Check */
+		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
+			return sharpsl_off_charge_error();
+
+		/* Start Charging */
+		sharpsl_pm_led(SHARPSL_LED_ON);
+		sharpsl_pm.machinfo->charge(0);
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		sharpsl_pm.machinfo->charge(1);
+
+		sharpsl_pm.charge_mode = CHRG_ON;
+		sharpsl_pm.full_count = 0;
+
+		return 1;
+	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
+		return 1;
+	}
+
+	if (sharpsl_pm.full_count == 0) {
+		int time;
+
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
+		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
+			return sharpsl_off_charge_error();
+
+		sharpsl_pm.machinfo->charge(0);
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		sharpsl_pm.machinfo->charge(1);
+		sharpsl_pm.charge_mode = CHRG_ON;
+
+		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+		time = RCNR;
+		while(1) {
+			/* Check if any wakeup event had occurred */
+			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+				return 0;
+			/* Check for timeout */
+			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
+				return 1;
+			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
+				sharpsl_pm.full_count++;
+				sharpsl_pm.machinfo->charge(0);
+				mdelay(SHARPSL_CHARGE_WAIT_TIME);
+				sharpsl_pm.machinfo->charge(1);
+				return 1;
+			}
+		}
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
+
+	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+	time = RCNR;
+	while(1) {
+		/* Check if any wakeup event had occurred */
+		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+			return 0;
+		/* Check for timeout */
+		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
+			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
+				sharpsl_pm.full_count = 0;
+			}
+			sharpsl_pm.full_count++;
+			return 1;
+		}
+		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
+			sharpsl_pm_led(SHARPSL_LED_OFF);
+			sharpsl_pm.machinfo->charge(0);
+			sharpsl_pm.charge_mode = CHRG_DONE;
+			return 1;
+		}
+	}
+}
+#else
+#define sharpsl_pm_suspend	NULL
+#define sharpsl_pm_resume	NULL
+#endif
+
+static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+}
+
+static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+}
+
+static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
+static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
+
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+static void sharpsl_apm_get_power_status(struct apm_power_info *info)
+{
+	info->ac_line_status = sharpsl_pm.battstat.ac_status;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		info->battery_status = APM_BATTERY_STATUS_CHARGING;
+	else
+		info->battery_status = sharpsl_pm.battstat.mainbat_status;
+
+	info->battery_flag = (1 << info->battery_status);
+	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
+}
+
+#ifdef CONFIG_PM
+static struct platform_suspend_ops sharpsl_pm_ops = {
+	.prepare	= pxa_pm_prepare,
+	.finish		= pxa_pm_finish,
+	.enter		= corgi_pxa_pm_enter,
+	.valid		= suspend_valid_only_mem,
+};
+#endif
+
+static int __init sharpsl_pm_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	sharpsl_pm.dev = &pdev->dev;
+	sharpsl_pm.machinfo = pdev->dev.platform_data;
+	sharpsl_pm.charge_mode = CHRG_OFF;
+	sharpsl_pm.flags = 0;
+
+	init_timer(&sharpsl_pm.ac_timer);
+	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
+
+	init_timer(&sharpsl_pm.chrg_full_timer);
+	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+
+	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
+
+	sharpsl_pm.machinfo->init();
+
+	gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
+	gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
+	gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
+	gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
+	gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
+	gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
 
 	/* Register interrupt handlers */
-	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
+	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
 
-	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
+	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
 
 	if (sharpsl_pm.machinfo->gpio_fatal) {
-		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
+		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
 	}
 
 	if (sharpsl_pm.machinfo->batfull_irq)
 	{
 		/* Register interrupt handler. */
-		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
+		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
 	}
+
+	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
+	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
+	if (ret != 0)
+		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
+
+	apm_get_power_status = sharpsl_apm_get_power_status;
+
+#ifdef CONFIG_PM
+	suspend_set_ops(&sharpsl_pm_ops);
+#endif
+
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return 0;
 }
 
-void sharpsl_pm_pxa_remove(void)
+static int sharpsl_pm_remove(struct platform_device *pdev)
 {
+	suspend_set_ops(NULL);
+
+	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
+	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
+
+	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
+
 	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
 	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
 
@@ -188,4 +984,39 @@ void sharpsl_pm_pxa_remove(void)
 
 	if (sharpsl_pm.machinfo->batfull_irq)
 		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+
+	gpio_free(sharpsl_pm.machinfo->gpio_batlock);
+	gpio_free(sharpsl_pm.machinfo->gpio_batfull);
+	gpio_free(sharpsl_pm.machinfo->gpio_acin);
+
+	if (sharpsl_pm.machinfo->exit)
+		sharpsl_pm.machinfo->exit();
+
+	del_timer_sync(&sharpsl_pm.chrg_full_timer);
+	del_timer_sync(&sharpsl_pm.ac_timer);
+
+	return 0;
 }
+
+static struct platform_driver sharpsl_pm_driver = {
+	.probe		= sharpsl_pm_probe,
+	.remove		= sharpsl_pm_remove,
+	.suspend	= sharpsl_pm_suspend,
+	.resume		= sharpsl_pm_resume,
+	.driver		= {
+		.name		= "sharpsl-pm",
+	},
+};
+
+static int __devinit sharpsl_pm_init(void)
+{
+	return platform_driver_register(&sharpsl_pm_driver);
+}
+
+static void sharpsl_pm_exit(void)
+{
+	platform_driver_unregister(&sharpsl_pm_driver);
+}
+
+late_initcall(sharpsl_pm_init);
+module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 5a45fe340a1..dda310fe71c 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -13,19 +13,11 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/backlight.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/spi/spi.h>
@@ -34,31 +26,22 @@
 #include <linux/mtd/sharpsl.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/scoop.h>
+
 
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
-#include <mach/sharpsl.h>
-
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -317,13 +300,8 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.wait_for_sync		= spitz_wait_for_hsync,
 };
 
-static void spitz_ads7846_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_ads7846_chip = {
-	.cs_control		= spitz_ads7846_cs,
+	.gpio_cs		= SPITZ_GPIO_ADS7846_CS,
 };
 
 static void spitz_bl_kick_battery(void)
@@ -347,22 +325,12 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.kick_battery		= spitz_bl_kick_battery,
 };
 
-static void spitz_lcdcon_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
-	.cs_control	= spitz_lcdcon_cs,
+	.gpio_cs	= SPITZ_GPIO_LCDCON_CS,
 };
 
-static void spitz_max1111_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_max1111_chip = {
-	.cs_control	= spitz_max1111_cs,
+	.gpio_cs	= SPITZ_GPIO_MAX1111_CS,
 };
 
 static struct spi_board_info spitz_spi_devices[] = {
@@ -392,30 +360,6 @@ static struct spi_board_info spitz_spi_devices[] = {
 
 static void __init spitz_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
-	if (err)
-		goto err_free_2;
-
-	err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1);
-	if (err)
-		goto err_free_3;
-	err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1);
-	if (err)
-		goto err_free_3;
-	err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1);
-	if (err)
-		goto err_free_3;
-
 	if (machine_is_akita()) {
 		spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
 		spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
@@ -423,14 +367,6 @@ static void __init spitz_init_spi(void)
 
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
-	return;
-
-err_free_3:
-	gpio_free(SPITZ_GPIO_MAX1111_CS);
-err_free_2:
-	gpio_free(SPITZ_GPIO_LCDCON_CS);
-err_free_1:
-	gpio_free(SPITZ_GPIO_ADS7846_CS);
 }
 #else
 static inline void spitz_init_spi(void) {}
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 2e4490562c9..724ffb03031 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -41,7 +41,6 @@ static void spitz_charger_init(void)
 {
 	pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
 	pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
-	sharpsl_pm_pxa_init();
 }
 
 static void spitz_measure_temp(int on)
@@ -182,7 +181,7 @@ unsigned long spitzpm_read_devdata(int type)
 
 struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.init             = spitz_charger_init,
-	.exit             = sharpsl_pm_pxa_remove,
+	.exit             = NULL,
 	.gpio_batlock     = SPITZ_GPIO_BAT_COVER,
 	.gpio_acin        = SPITZ_GPIO_AC_IN,
 	.gpio_batfull     = SPITZ_GPIO_CHRG_FULL,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
new file mode 100644
index 00000000000..3b205b69f3f
--- /dev/null
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -0,0 +1,796 @@
+/*
+ *  linux/arch/arm/mach-pxa/stargate2.c
+ *
+ *  Author:	Ed C. Epp
+ *  Created:	Nov 05, 2002
+ *  Copyright:	Intel Corp.
+ *
+ *  Modified 2009:  Jonathan Cameron <jic23@cam.ac.uk>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/at24.h>
+#include <linux/smc91x.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <plat/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pxa27x-udc.h>
+
+#include <linux/spi/spi.h>
+#include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Bluetooth */
+#define SG2_BT_RESET		81
+
+/* SD */
+#define SG2_GPIO_nSD_DETECT	90
+#define SG2_SD_POWER_ENABLE	89
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+	GPIO15_nCS_1, /* SRAM */
+	/* SMC91x */
+	GPIO80_nCS_4,
+	GPIO40_GPIO, /*cable detect?*/
+	/* Device Identification for wakeup*/
+	GPIO102_GPIO,
+
+	/* Button */
+	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+	/* DA9030 */
+	GPIO1_GPIO,
+
+	/* Compact Flash */
+	GPIO79_PSKTSEL,
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO120_GPIO, /* Buff ctrl */
+	GPIO108_GPIO, /* Power ctrl */
+	GPIO82_GPIO, /* Reset */
+	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO90_GPIO, /* nSD detect */
+	GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+	/* Bluetooth */
+	GPIO81_GPIO, /* reset */
+
+	/* cc2420 802.15.4 radio */
+	GPIO22_GPIO,		/* CC_RSTN  (out)*/
+	GPIO114_GPIO,		/* CC_FIFO (in) */
+	GPIO116_GPIO, 		/* CC_CCA (in) */
+	GPIO0_GPIO,		/* CC_FIFOP (in) */
+	GPIO16_GPIO,		/* CCSFD (in) */
+	GPIO39_GPIO,		/* CSn (out) */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP 3 - 802.15.4 radio */
+	GPIO39_GPIO, /* chip select */
+	GPIO34_SSP3_SCLK,
+	GPIO35_SSP3_TXD,
+	GPIO41_SSP3_RXD,
+
+	/* SSP 2 */
+	GPIO11_SSP2_RXD,
+	GPIO38_SSP2_TXD,
+	GPIO36_SSP2_SCLK,
+	GPIO37_GPIO, /* chip select */
+
+	/* SSP 1 */
+	GPIO26_SSP1_RXD,
+	GPIO25_SSP1_TXD,
+	GPIO23_SSP1_SCLK,
+	GPIO24_GPIO, /* chip select */
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* Basic sensor board */
+	GPIO96_GPIO,	/* accelerometer interrupt */
+	GPIO99_GPIO,	/* ADC interrupt */
+
+	/* Connector pins specified as gpios */
+	GPIO94_GPIO, /* large basic connector pin 14 */
+	GPIO10_GPIO, /* large basic connector pin 23 */
+
+	/* SHT15 */
+	GPIO100_GPIO,
+	GPIO98_GPIO,
+};
+
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+	int err;
+	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+	if (err) {
+		printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
+		return err;
+	}
+	gpio_direction_output(SG2_BT_RESET, 1);
+	mdelay(5);
+	/* now reset it - 5 msec minimum */
+	gpio_set_value(SG2_BT_RESET, 0);
+	mdelay(10);
+	gpio_set_value(SG2_BT_RESET, 1);
+	gpio_free(SG2_BT_RESET);
+	return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+	{
+		.name = "sg2:red",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:blue",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:green",
+		.flags = DA9030_LED_RATE_ON,
+	},
+};
+
+static struct sht15_platform_data platform_data_sht15 = {
+	.gpio_data =  100,
+	.gpio_sck  =  98,
+};
+
+static struct platform_device sht15 = {
+	.name = "sht15",
+	.id = -1,
+	.dev = {
+		.platform_data = &platform_data_sht15,
+	},
+};
+
+static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
+	{
+		.dev = &sht15.dev,
+		.supply = "vcc",
+	},
+};
+
+enum stargate2_ldos{
+	vcc_vref,
+	vcc_cc2420,
+	/* a mote connector? */
+	vcc_mica,
+	/* the CSR bluecore chip */
+	vcc_bt,
+	/* The two voltages available to sensor boards */
+	vcc_sensor_1_8,
+	vcc_sensor_3,
+	/* directly connected to the pxa27x */
+	vcc_sram_ext,
+	vcc_pxa_pll,
+	vcc_pxa_usim, /* Reference voltage for certain gpios */
+	vcc_pxa_mem,
+	vcc_pxa_flash,
+	vcc_pxa_core, /*Dc-Dc buck not yet supported */
+	vcc_lcd,
+	vcc_bb,
+	vcc_bbio, /*not sure!*/
+	vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
+};
+
+/* The values of the various regulator constraints are obviously dependent
+ * on exactly what is wired to each ldo.  Unfortunately this information is
+ * not generally available.  More information has been requested from Xbow.
+ */
+static struct regulator_init_data stargate2_ldo_init_data[] = {
+	[vcc_bbio] = {
+		.constraints = { /* board default 1.8V */
+			.name = "vcc_bbio",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_bb] = {
+		.constraints = { /* board default 2.8V */
+			.name = "vcc_bb",
+			.min_uV = 2700000,
+			.max_uV = 3000000,
+		},
+	},
+	[vcc_pxa_flash] = {
+		.constraints = {/* default is 1.8V */
+			.name = "vcc_pxa_flash",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_cc2420] = { /* also vcc_io */
+		.constraints = {
+			/* board default is 2.8V */
+			.name = "vcc_cc2420",
+			.min_uV = 2700000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_vref] = { /* Reference for what? */
+		.constraints = { /* default 1.8V */
+			.name = "vcc_vref",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_sram_ext] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_sram_ext",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_mica] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_mica",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_bt] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_bt",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_lcd] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_lcd",
+			.min_uV = 2700000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_io] = { /* Same or higher than everything
+			  * bar vccbat and vccusb */
+		.constraints = { /* default 2.8V */
+			.name = "vcc_io",
+			.min_uV = 2692000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_sensor_1_8] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_sensor_1_8",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_sensor_3] = { /* curiously default 2.8V */
+		.constraints = {
+			.name = "vcc_sensor_3",
+			.min_uV = 2800000,
+			.max_uV = 3000000,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
+		.consumer_supplies = stargate2_sensor_3_con,
+	},
+	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
+		.constraints = {
+			.name = "vcc_pxa_pll",
+			.min_uV = 1170000,
+			.max_uV = 1430000,
+		},
+	},
+	[vcc_pxa_usim] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_pxa_usim",
+			.min_uV = 1710000,
+			.max_uV = 2160000,
+		},
+	},
+	[vcc_pxa_mem] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_pxa_mem",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+	{
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_2,
+		.platform_data = &stargate2_leds[0],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_3,
+		.platform_data = &stargate2_leds[2],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_4,
+		.platform_data = &stargate2_leds[1],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO2,
+		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO3,
+		.platform_data = &stargate2_ldo_init_data[vcc_bb],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO4,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO5,
+		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO6,
+		.platform_data = &stargate2_ldo_init_data[vcc_vref],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO7,
+		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO8,
+		.platform_data = &stargate2_ldo_init_data[vcc_mica],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO9,
+		.platform_data = &stargate2_ldo_init_data[vcc_bt],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO10,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO11,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO12,
+		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO15,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO17,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+	}, {
+		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+		.id = DA9030_ID_LDO18,
+		.platform_data = &stargate2_ldo_init_data[vcc_io],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO19,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+	},
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+	.subdevs = stargate2_da9030_subdevs,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name = "smc91x-regs",
+		.start = (PXA_CS4_PHYS + 0x300),
+		.end = (PXA_CS4_PHYS + 0xfffff),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_GPIO(40),
+		.end = IRQ_GPIO(40),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata stargate2_smc91x_info = {
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
+	| SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev = {
+		.platform_data = &stargate2_smc91x_info,
+	},
+};
+
+
+
+static struct pxamci_platform_data stargate2_mci_platform_data;
+
+/*
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert / eject.
+ */
+static int stargate2_mci_init(struct device *dev,
+			      irq_handler_t stargate2_detect_int,
+			      void *data)
+{
+	int err;
+
+	err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
+	if (err) {
+		printk(KERN_ERR "Can't get the gpio for SD power control");
+		goto return_err;
+	}
+	gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
+
+	err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
+	if (err) {
+		printk(KERN_ERR "Can't get the sd detect gpio");
+		goto free_power_en;
+	}
+	gpio_direction_input(SG2_GPIO_nSD_DETECT);
+	/* Delay to allow for full insertion */
+	stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+	err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
+			  stargate2_detect_int,
+			  IRQ_TYPE_EDGE_BOTH,
+			  "MMC card detect",
+			  data);
+	if (err) {
+		printk(KERN_ERR "can't request MMC card detect IRQ\n");
+		goto free_nsd_detect;
+	}
+	return 0;
+
+ free_nsd_detect:
+	gpio_free(SG2_GPIO_nSD_DETECT);
+ free_power_en:
+	gpio_free(SG2_SD_POWER_ENABLE);
+ return_err:
+	return err;
+}
+
+/**
+ * stargate2_mci_setpower() - set state of mmc power supply
+ *
+ * Very simple control. Either it is on or off and is controlled by
+ * a gpio pin */
+static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+}
+
+static void stargate2_mci_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
+	gpio_free(SG2_SD_POWER_ENABLE);
+	gpio_free(SG2_GPIO_nSD_DETECT);
+}
+
+static struct pxamci_platform_data stargate2_mci_platform_data = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init = stargate2_mci_init,
+	.setpower = stargate2_mci_setpower,
+	.exit = stargate2_mci_exit,
+};
+
+static struct mtd_partition stargate2flash_partitions[] = {
+	{
+		.name = "Bootloader",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = 0,
+	}, {
+		.name = "Kernel",
+		.size = 0x00200000,
+		.offset = 0x00040000,
+		.mask_flags = 0
+	}, {
+		.name = "Filesystem",
+		.size = 0x01DC0000,
+		.offset = 0x00240000,
+		.mask_flags = 0
+	},
+};
+
+static struct resource flash_resources = {
+	.start = PXA_CS0_PHYS,
+	.end = PXA_CS0_PHYS + SZ_32M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+	.map_name = "cfi_probe",
+	.parts = stargate2flash_partitions,
+	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+	.name = "PXA27xOnChipROM",
+	.width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+	.name = "pxa2xx-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &stargate2_flash_data,
+	},
+	.resource = &flash_resources,
+	.num_resources = 1,
+};
+
+/*
+ * SRAM - The Stargate 2 has 32MB of SRAM.
+ *
+ * Here it is made available as an MTD. This will then
+ * typically have a cifs filesystem created on it to provide
+ * fast temporary storage.
+ */
+static struct resource sram_resources = {
+	.start = PXA_CS1_PHYS,
+	.end = PXA_CS1_PHYS + SZ_32M-1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platdata_mtd_ram stargate2_sram_pdata = {
+	.mapname = "Stargate2 SRAM",
+	.bankwidth = 2,
+};
+
+static struct platform_device stargate2_sram = {
+	.name = "mtd-ram",
+	.id = 0,
+	.resource = &sram_resources,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &stargate2_sram_pdata,
+	},
+};
+
+static struct pcf857x_platform_data platform_data_pcf857x = {
+	.gpio_base = 128,
+	.n_latch = 0,
+	.setup = NULL,
+	.teardown = NULL,
+	.context = NULL,
+};
+
+static struct at24_platform_data pca9500_eeprom_pdata = {
+	.byte_len = 256,
+	.page_size = 4,
+};
+
+
+static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
+	/* Techically this a pca9500 - but it's compatible with the 8574
+	 * for gpio expansion and the 24c02 for eeprom access.
+	 */
+	{
+		.type = "pcf8574",
+		.addr =  0x27,
+		.platform_data = &platform_data_pcf857x,
+	}, {
+		.type = "24c02",
+		.addr = 0x57,
+		.platform_data = &pca9500_eeprom_pdata,
+	}, {
+		.type = "max1238",
+		.addr = 0x35,
+	}, { /* ITS400 Sensor board only */
+		.type = "max1363",
+		.addr = 0x34,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tsl2561",
+		.addr = 0x49,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tmp175",
+		.addr = 0x4A,
+		.irq = IRQ_GPIO(96),
+	},
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+	{
+		.type = "da9030",
+		.addr = 0x49,
+		.platform_data = &stargate2_da9030_pdata,
+		.irq = gpio_to_irq(1),
+	},
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+	.num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias = "lis3l02dq",
+		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+		.bus_num = 1,
+		.chip_select = 0,
+		.controller_data = &staccel_chip_info,
+		.irq = IRQ_GPIO(96),
+	}, {
+		.modalias = "cc2420",
+		.max_speed_hz = 6500000,
+		.bus_num = 3,
+		.chip_select = 0,
+		.controller_data = &cc2420_info,
+	},
+};
+
+static void sg2_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+		break;
+	}
+}
+
+/* Board doesn't support cable detection - so always lie and say
+ * something is there.
+ */
+static int sg2_udc_detect(void)
+{
+	return 1;
+}
+
+static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
+	.udc_is_connected	= sg2_udc_detect,
+	.udc_command		= sg2_udc_command,
+};
+
+static struct platform_device *stargate2_devices[] = {
+	&stargate2_flash_device,
+	&stargate2_sram,
+	&smc91x_device,
+	&sht15,
+};
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+	.fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+	.fast_mode = 1,
+};
+
+static void __init stargate2_init(void)
+{
+	/* This is probably a board specific hack as this must be set
+	   prior to connecting the MFP stuff up. */
+	MECR &= ~MECR_NOS;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
+
+	/* spi chip selects */
+	gpio_direction_output(37, 0);
+	gpio_direction_output(24, 0);
+	gpio_direction_output(39, 0);
+
+	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+	i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
+	i2c_register_board_info(1,
+				ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
+	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+	pxa_set_i2c_info(&i2c_pdata);
+
+	pxa_set_mci_info(&stargate2_mci_platform_data);
+
+	pxa_set_udc_info(&stargate2_udc_info);
+
+	stargate2_reset_bluetooth();
+}
+
+MACHINE_START(STARGATE2, "Stargate 2")
+	.phys_io = 0x40000000,
+	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io = pxa_map_io,
+	.init_irq = pxa27x_init_irq,
+	.timer = &pxa_timer,
+	.init_machine = stargate2_init,
+	.boot_params = 0xA0000100,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index a0bd46ef5d3..168267a5dfb 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -40,7 +40,7 @@
 #include <mach/pxa25x.h>
 #include <mach/reset.h>
 #include <mach/irda.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/tosa_bt.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index f79c9cb70ae..825f540176d 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -47,7 +47,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index dd031cc4184..d33c232b686 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -45,7 +45,7 @@
 #include <mach/pxa25x.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/regs-uart.h>
 #include <mach/viper.h>
 
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index c256c57642c..cefd1c0a854 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -21,7 +21,7 @@
 #include <linux/gpio.h>
 
 #include <mach/pxa300.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/zylonite.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index b6ec1062777..d4cfa214538 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -24,7 +24,6 @@ config REALVIEW_EB_ARM11MP
 config REALVIEW_EB_ARM11MP_REVB
 	bool "Support ARM11MPCore RevB tile"
 	depends on REALVIEW_EB_ARM11MP
-	default n
 	help
 	  Enable support for the ARM11MPCore RevB tile on the Realview
 	  platform. Since there are device address differences, a
@@ -48,6 +47,15 @@ config MACH_REALVIEW_PB1176
 	help
 	  Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
 
+config REALVIEW_PB1176_SECURE_FLASH
+	bool "Allow access to the secure flash memory block"
+	depends on MACH_REALVIEW_PB1176
+	default n
+	help
+	  Select this option if Linux will only run in secure mode on the
+	  RealView PB1176 platform and access to the secure flash memory
+	  block (64MB @ 0x3c000000) is required.
+
 config MACH_REALVIEW_PBA8
 	bool "Support RealView/PB-A8 platform"
 	select CPU_V7
@@ -58,6 +66,13 @@ config MACH_REALVIEW_PBA8
 	  PB-A8 is a platform with an on-board Cortex-A8 and has support for
 	  PCI-E and Compact Flash.
 
+config MACH_REALVIEW_PBX
+	bool "Support RealView/PBX platform"
+	select ARM_GIC
+	select HAVE_PATA_PLATFORM
+	help
+	  Include support for the ARM(R) RealView PBX platform.
+
 config REALVIEW_HIGH_PHYS_OFFSET
 	bool "High physical base address for the RealView platform"
 	depends on !MACH_REALVIEW_PB1176
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 7bea8ffc4b5..e704edb733c 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -7,5 +7,7 @@ obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
 obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
-obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
+obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 076acbc5070..9ea9c05093c 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -48,6 +48,9 @@
 
 #include <asm/hardware/gic.h>
 
+#include <mach/platform.h>
+#include <mach/irqs.h>
+
 #include "core.h"
 #include "clock.h"
 
@@ -578,21 +581,22 @@ void realview_leds_event(led_event_t ledevt)
 {
 	unsigned long flags;
 	u32 val;
+	u32 led = 1 << smp_processor_id();
 
 	local_irq_save(flags);
 	val = readl(VA_LEDS_BASE);
 
 	switch (ledevt) {
 	case led_idle_start:
-		val = val & ~REALVIEW_SYS_LED0;
+		val = val & ~led;
 		break;
 
 	case led_idle_end:
-		val = val | REALVIEW_SYS_LED0;
+		val = val | led;
 		break;
 
 	case led_timer:
-		val = val ^ REALVIEW_SYS_LED1;
+		val = val ^ REALVIEW_SYS_LED7;
 		break;
 
 	case led_halted:
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 21c08637683..59a337ba4be 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -51,9 +51,6 @@ extern struct mmc_platform_data realview_mmc0_plat_data;
 extern struct mmc_platform_data realview_mmc1_plat_data;
 extern struct clcd_board clcd_plat_data;
 extern void __iomem *gic_cpu_base_addr;
-#ifdef CONFIG_LOCAL_TIMERS
-extern void __iomem *twd_base;
-#endif
 extern void __iomem *timer0_va_base;
 extern void __iomem *timer1_va_base;
 extern void __iomem *timer2_va_base;
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 268d7701fa9..794a8d91a6a 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -62,111 +62,6 @@
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
 #endif
 
-#define IRQ_EB_GIC_START	32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
-#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
-#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
-#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
-#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
-#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
-#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
-#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
-#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
-#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
-#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
-#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
-#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
-#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
-#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
-#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
-#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
-#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
-#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
-#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
-#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
-#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
-#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
-#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
-#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
-#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
-#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
-
-#define IRQ_EB11MP_UART2	-1
-#define IRQ_EB11MP_UART3	-1
-#define IRQ_EB11MP_CLCD		-1
-#define IRQ_EB11MP_DMA		-1
-#define IRQ_EB11MP_WDOG		-1
-#define IRQ_EB11MP_GPIO0	-1
-#define IRQ_EB11MP_GPIO1	-1
-#define IRQ_EB11MP_GPIO2	-1
-#define IRQ_EB11MP_SCI		-1
-#define IRQ_EB11MP_SSP		-1
-
-#define NR_GIC_EB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
-	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
-	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_EB11MP
-#endif
-
 /*
  * Core tile identification (REALVIEW_SYS_PROCID)
  */
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 858eea7b1ad..98f8e7eeacc 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -32,6 +32,8 @@
 #define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
 #define REALVIEW_PB1176_FLASH_BASE		0x30000000
 #define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
+#define REALVIEW_PB1176_SEC_FLASH_BASE		0x3C000000 /* Secure flash */
+#define REALVIEW_PB1176_SEC_FLASH_SIZE		SZ_64M
 
 #define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
 #define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
@@ -71,82 +73,4 @@
 #define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
 #define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
 
-/*
- * Irqs
- */
-#define IRQ_DC1176_GIC_START			32
-#define IRQ_PB1176_GIC_START			64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
-#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
-#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
-#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
-#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
-#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
-#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
-#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
-#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
-#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
-#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
-#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
-
-#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
-
-#define IRQ_PB1176_GPIO0	-1
-#define IRQ_PB1176_SSP		-1
-#define IRQ_PB1176_SCTL		-1
-
-#define NR_GIC_PB1176		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB1176
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
-
 #endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index 53ea0e7a126..f0d68e0fea0 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -81,105 +81,4 @@
 #define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
 #define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
 
-/*
- * Irqs
- */
-#define IRQ_TC11MP_GIC_START			32
-#define IRQ_PB11MP_GIC_START			64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
-#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
-#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
-#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
-#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
-#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
-#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC		-1
-#define IRQ_PB11MP_SCTL		-1
-
-#define NR_GIC_PB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB11MP
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
-
 #endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index 307f97b16e5..4dfc67a4f45 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -70,81 +70,4 @@
 #define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
 #define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */
 
-/*
- * Irqs
- */
-#define IRQ_PBA8_GIC_START			32
-
-/* L220
-#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
-*/
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
-#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
-#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
-
-/* ... */
-#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC		-1
-#define IRQ_PBA8_SCTL		-1
-
-#define NR_GIC_PBA8		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBA8
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
-
 #endif	/* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/include/mach/board-pbx.h
new file mode 100644
index 00000000000..848bfff6d8f
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pbx.h
@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_BOARD_PBX_H
+#define __ASM_ARCH_BOARD_PBX_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PBX_UART0_BASE			0x10009000	/* UART 0 */
+#define REALVIEW_PBX_UART1_BASE			0x1000A000	/* UART 1 */
+#define REALVIEW_PBX_UART2_BASE			0x1000B000	/* UART 2 */
+#define REALVIEW_PBX_UART3_BASE			0x1000C000	/* UART 3 */
+#define REALVIEW_PBX_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_PBX_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
+#define REALVIEW_PBX_WATCHDOG_BASE		0x10010000	/* watchdog interface */
+#define REALVIEW_PBX_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_PBX_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_PBX_GPIO0_BASE			0x10013000	/* GPIO port 0 */
+#define REALVIEW_PBX_RTC_BASE			0x10017000	/* Real Time Clock */
+#define REALVIEW_PBX_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
+#define REALVIEW_PBX_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
+#define REALVIEW_PBX_SCTL_BASE			0x1001A000	/* System Controller */
+#define REALVIEW_PBX_CLCD_BASE			0x10020000	/* CLCD */
+#define REALVIEW_PBX_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
+#define REALVIEW_PBX_DMC_BASE			0x100E0000	/* DMC configuration */
+#define REALVIEW_PBX_SMC_BASE			0x100E1000	/* SMC configuration */
+#define REALVIEW_PBX_CAN_BASE			0x100E2000	/* CAN bus */
+#define REALVIEW_PBX_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_FLASH0_BASE		0x40000000
+#define REALVIEW_PBX_FLASH0_SIZE		SZ_64M
+#define REALVIEW_PBX_FLASH1_BASE		0x44000000
+#define REALVIEW_PBX_FLASH1_SIZE		SZ_64M
+#define REALVIEW_PBX_ETH_BASE			0x4E000000	/* Ethernet */
+#define REALVIEW_PBX_USB_BASE			0x4F000000	/* USB */
+#define REALVIEW_PBX_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
+#define REALVIEW_PBX_LT_BASE			0xC0000000	/* Logic Tile expansion */
+#define REALVIEW_PBX_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
+#define REALVIEW_PBX_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
+
+/*
+ * Tile-specific addresses
+ */
+#define REALVIEW_PBX_TILE_SCU_BASE		0x1F000000      /* SCU registers */
+#define REALVIEW_PBX_TILE_GIC_CPU_BASE		0x1F000100      /* Private Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_TILE_TWD_BASE		0x1F000600
+#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE	0x1F000700
+#define REALVIEW_PBX_TILE_TWD_SIZE		0x00000100
+#define REALVIEW_PBX_TILE_GIC_DIST_BASE		0x1F001000      /* Private Generic interrupt controller distributor */
+#define REALVIEW_PBX_TILE_L220_BASE		0x1F002000      /* L220 registers */
+
+#define REALVIEW_PBX_SYS_PLD_CTRL1		0x74
+
+/*
+ * PBX PCI regions
+ */
+#define REALVIEW_PBX_PCI_BASE			0x90040000	/* PCI-X Unit base */
+#define REALVIEW_PBX_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
+#define REALVIEW_PBX_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
+
+#define REALVIEW_PBX_PCI_BASE_SIZE		0x10000		/* 16 Kb */
+#define REALVIEW_PBX_PCI_IO_SIZE		0x1000		/* 4 Kb */
+#define REALVIEW_PBX_PCI_MEM_SIZE		0x20000000	/* 512 MB */
+
+/*
+ * Core tile identification (REALVIEW_SYS_PROCID)
+ */
+#define REALVIEW_PBX_PROC_MASK          0xFF000000
+#define REALVIEW_PBX_PROC_ARM7TDMI      0x00000000
+#define REALVIEW_PBX_PROC_ARM9          0x02000000
+#define REALVIEW_PBX_PROC_ARM11         0x04000000
+#define REALVIEW_PBX_PROC_ARM11MP       0x06000000
+#define REALVIEW_PBX_PROC_A9MP          0x0C000000
+#define REALVIEW_PBX_PROC_A8            0x0E000000
+
+#define check_pbx_proc(proc_type)                                            \
+	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
+	== proc_type)
+
+#ifdef CONFIG_MACH_REALVIEW_PBX
+#define core_tile_pbx11mp()     check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
+#define core_tile_pbxa9mp()     check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
+#define core_tile_pbxa8()       check_pbx_proc(REALVIEW_PBX_PROC_A8)
+#else
+#define core_tile_pbx11mp()     0
+#define core_tile_pbxa9mp()     0
+#define core_tile_pbxa8()       0
+#endif
+
+#endif	/* __ASM_ARCH_BOARD_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 92dbcb9e179..932d8af1806 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -12,7 +12,8 @@
 
 #if defined(CONFIG_MACH_REALVIEW_EB) || \
     defined(CONFIG_MACH_REALVIEW_PB11MP) || \
-    defined(CONFIG_MACH_REALVIEW_PBA8)
+    defined(CONFIG_MACH_REALVIEW_PBA8) || \
+    defined(CONFIG_MACH_REALVIEW_PBX)
 #ifndef DEBUG_LL_UART_OFFSET
 #define DEBUG_LL_UART_OFFSET	0x00009000
 #elif DEBUG_LL_UART_OFFSET != 0x00009000
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h
new file mode 100644
index 00000000000..204d5378f30
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-eb.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_EB_H
+#define __MACH_IRQS_EB_H
+
+#define IRQ_EB_GIC_START	32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
+#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
+#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
+#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
+#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
+#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
+#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
+#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
+#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
+#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
+#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
+#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
+#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
+#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
+#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
+#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
+#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
+#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
+#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
+#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
+#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
+#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
+#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
+#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
+#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
+#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
+#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2	-1
+#define IRQ_EB11MP_UART3	-1
+#define IRQ_EB11MP_CLCD		-1
+#define IRQ_EB11MP_DMA		-1
+#define IRQ_EB11MP_WDOG		-1
+#define IRQ_EB11MP_GPIO0	-1
+#define IRQ_EB11MP_GPIO1	-1
+#define IRQ_EB11MP_GPIO2	-1
+#define IRQ_EB11MP_SCI		-1
+#define IRQ_EB11MP_SSP		-1
+
+#define NR_GIC_EB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
+	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_EB11MP
+#endif
+
+#endif	/* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
new file mode 100644
index 00000000000..2410d4f8ddd
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -0,0 +1,99 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB1176_H
+#define __MACH_IRQS_PB1176_H
+
+#define IRQ_DC1176_GIC_START			32
+#define IRQ_PB1176_GIC_START			64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
+#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
+#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
+#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
+#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
+#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
+#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
+#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
+#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
+#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
+#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
+
+#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0	-1
+#define IRQ_PB1176_SSP		-1
+#define IRQ_PB1176_SCTL		-1
+
+#define NR_GIC_PB1176		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB1176
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif	/* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
new file mode 100644
index 00000000000..34e255add21
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB11MP_H
+#define __MACH_IRQS_PB11MP_H
+
+#define IRQ_TC11MP_GIC_START			32
+#define IRQ_PB11MP_GIC_START			64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
+#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
+#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
+#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
+#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
+#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
+#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC		-1
+#define IRQ_PB11MP_SCTL		-1
+
+#define NR_GIC_PB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB11MP
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif	/* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h
new file mode 100644
index 00000000000..86792a9f2ab
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PBA8_H
+#define __MACH_IRQS_PBA8_H
+
+#define IRQ_PBA8_GIC_START			32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
+#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
+#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC		-1
+#define IRQ_PBA8_SCTL		-1
+
+#define NR_GIC_PBA8		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBA8
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif	/* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h
new file mode 100644
index 00000000000..deaad4302b1
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_IRQS_PBX_H
+#define __MACH_IRQS_PBX_H
+
+#define IRQ_PBX_GIC_START			32
+
+/* L220
+#define IRQ_PBX_L220_EVENT	(IRQ_PBX_GIC_START + 29)
+#define IRQ_PBX_L220_SLAVE	(IRQ_PBX_GIC_START + 30)
+#define IRQ_PBX_L220_DECODE	(IRQ_PBX_GIC_START + 31)
+*/
+
+/*
+ * PBX on-board gic irq sources
+ */
+#define IRQ_PBX_WATCHDOG	(IRQ_PBX_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBX_SOFT		(IRQ_PBX_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBX_COMMRx		(IRQ_PBX_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBX_COMMTx		(IRQ_PBX_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBX_TIMER0_1	(IRQ_PBX_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER2_3	(IRQ_PBX_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBX_GPIO0		(IRQ_PBX_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBX_GPIO1		(IRQ_PBX_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBX_GPIO2		(IRQ_PBX_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBX_RTC		(IRQ_PBX_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBX_SSP		(IRQ_PBX_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBX_UART0		(IRQ_PBX_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBX_UART1		(IRQ_PBX_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBX_UART2		(IRQ_PBX_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBX_UART3		(IRQ_PBX_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBX_SCI		(IRQ_PBX_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBX_MMCI0A		(IRQ_PBX_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBX_MMCI0B		(IRQ_PBX_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBX_AACI		(IRQ_PBX_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBX_KMI0		(IRQ_PBX_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBX_KMI1		(IRQ_PBX_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBX_CHARLCD		(IRQ_PBX_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBX_CLCD		(IRQ_PBX_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBX_DMAC		(IRQ_PBX_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBX_PWRFAIL		(IRQ_PBX_GIC_START + 25)	/* Power failure */
+#define IRQ_PBX_PISMO		(IRQ_PBX_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBX_DoC		(IRQ_PBX_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBX_ETH		(IRQ_PBX_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBX_USB		(IRQ_PBX_GIC_START + 29)	/* USB controller */
+#define IRQ_PBX_TSPEN		(IRQ_PBX_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBX_TSKPAD		(IRQ_PBX_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
+#define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
+#define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
+#define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
+#define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
+#define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
+#define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
+#define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)
+
+#define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
+#define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
+/* ... */
+#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 47)
+
+/* ... */
+#define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
+#define IRQ_PBX_PCI1		(IRQ_PBX_GIC_START + 51)
+#define IRQ_PBX_PCI2		(IRQ_PBX_GIC_START + 52)
+#define IRQ_PBX_PCI3		(IRQ_PBX_GIC_START + 53)
+
+#define IRQ_PBX_SMC		-1
+#define IRQ_PBX_SCTL		-1
+
+#define NR_GIC_PBX		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBX
+ */
+#define NR_IRQS_PBX		(IRQ_PBX_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PBX)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBX
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBX
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBX */
+
+#endif	/* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
index fe5cb987aa2..78854f2fa32 100644
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -22,10 +22,11 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
+#include <mach/irqs-eb.h>
+#include <mach/irqs-pb11mp.h>
+#include <mach/irqs-pb1176.h>
+#include <mach/irqs-pba8.h>
+#include <mach/irqs-pbx.h>
 
 #define IRQ_LOCALTIMER		29
 #define IRQ_LOCALWDOG		30
diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h
deleted file mode 100644
index d55802d645a..00000000000
--- a/arch/arm/mach-realview/include/mach/scu.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASMARM_ARCH_SCU_H
-#define __ASMARM_ARCH_SCU_H
-
-/*
- * SCU registers
- */
-#define SCU_CTRL		0x00
-#define SCU_CONFIG		0x04
-#define SCU_CPU_STATUS		0x08
-#define SCU_INVALIDATE		0x0c
-#define SCU_FPGA_REVISION	0x10
-
-#endif
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
index 415d634d52a..83050378ffd 100644
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -24,6 +24,7 @@
 #include <mach/board-pb11mp.h>
 #include <mach/board-pb1176.h>
 #include <mach/board-pba8.h>
+#include <mach/board-pbx.h>
 
 #define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
 #define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
@@ -43,6 +44,8 @@ static inline unsigned long get_uart_base(void)
 		return REALVIEW_PB1176_UART0_BASE;
 	else if (machine_is_realview_pba8())
 		return REALVIEW_PBA8_UART0_BASE;
+	else if (machine_is_realview_pbx())
+		return REALVIEW_PBX_UART0_BASE;
 	else
 		return 0;
 }
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 1c01d13460f..60b4e111f45 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -9,196 +9,18 @@
  * published by the Free Software Foundation.
  */
 #include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/smp.h>
-#include <linux/jiffies.h>
-#include <linux/percpu.h>
 #include <linux/clockchips.h>
-#include <linux/irq.h>
-#include <linux/io.h>
 
-#include <asm/hardware/arm_twd.h>
-#include <asm/hardware/gic.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
-
-static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
-
-/*
- * Used on SMP for either the local timer or IPI_TIMER
- */
-void local_timer_interrupt(void)
-{
-	struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
-
-	clk->event_handler(clk);
-}
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/* set up by the platform code */
-void __iomem *twd_base;
-
-static unsigned long mpcore_timer_rate;
-
-static void local_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *clk)
-{
-	unsigned long ctrl;
-
-	switch(mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* timer load already set up */
-		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
-			| TWD_TIMER_CONTROL_PERIODIC;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
-}
-
-static int local_timer_set_next_event(unsigned long evt,
-				      struct clock_event_device *unused)
-{
-	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
-
-	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
-	__raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL);
-
-	return 0;
-}
-
-/*
- * local_timer_ack: checks for a local timer interrupt.
- *
- * If a local timer interrupt has occurred, acknowledge and return 1.
- * Otherwise, return 0.
- */
-int local_timer_ack(void)
-{
-	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
-		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
-		return 1;
-	}
-
-	return 0;
-}
-
-static void __cpuinit twd_calibrate_rate(void)
-{
-	unsigned long load, count;
-	u64 waitjiffies;
-
-	/*
-	 * If this is the first time round, we need to work out how fast
-	 * the timer ticks
-	 */
-	if (mpcore_timer_rate == 0) {
-		printk("Calibrating local timer... ");
-
-		/* Wait for a tick to start */
-		waitjiffies = get_jiffies_64() + 1;
-
-		while (get_jiffies_64() < waitjiffies)
-			udelay(10);
-
-		/* OK, now the tick has started, let's get the timer going */
-		waitjiffies += 5;
-
-				 /* enable, no interrupt or reload */
-		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
-
-				 /* maximum value */
-		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
-
-		while (get_jiffies_64() < waitjiffies)
-			udelay(10);
-
-		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
-
-		mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
-
-		printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000,
-			(mpcore_timer_rate / 100000) % 100);
-	}
-
-	load = mpcore_timer_rate / HZ;
-
-	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
-}
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
 
 /*
  * Setup the local clock events for a CPU.
  */
-void __cpuinit local_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-	unsigned long flags;
-
-	twd_calibrate_rate();
-
-	clk->name		= "local_timer";
-	clk->features		= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	clk->rating		= 350;
-	clk->set_mode		= local_timer_set_mode;
-	clk->set_next_event	= local_timer_set_next_event;
-	clk->irq		= IRQ_LOCALTIMER;
-	clk->cpumask		= cpumask_of(cpu);
-	clk->shift		= 20;
-	clk->mult		= div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift);
-	clk->max_delta_ns	= clockevent_delta2ns(0xffffffff, clk);
-	clk->min_delta_ns	= clockevent_delta2ns(0xf, clk);
-
-	/* Make sure our local interrupt controller has this enabled */
-	local_irq_save(flags);
-	get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER);
-	local_irq_restore(flags);
-
-	clockevents_register_device(clk);
-}
-
-/*
- * take a local timer down
- */
-void __cpuexit local_timer_stop(void)
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
-	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
 }
-
-#else	/* CONFIG_LOCAL_TIMERS */
-
-static void dummy_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *clk)
-{
-}
-
-void __cpuinit local_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-
-	clk->name		= "dummy_timer";
-	clk->features		= CLOCK_EVT_FEAT_ONESHOT |
-				  CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_DUMMY;
-	clk->rating		= 400;
-	clk->mult               = 1;
-	clk->set_mode		= dummy_timer_set_mode;
-	clk->broadcast		= smp_timer_broadcast;
-	clk->cpumask		= cpumask_of(cpu);
-
-	clockevents_register_device(clk);
-}
-
-#endif	/* !CONFIG_LOCAL_TIMERS */
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 30a9c68591f..ac0e83f1cc3 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -19,10 +19,12 @@
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
+#include <asm/localtimer.h>
 
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
-#include <mach/scu.h>
+#include <mach/board-pbx.h>
+#include <asm/smp_scu.h>
 
 #include "core.h"
 
@@ -40,35 +42,19 @@ static void __iomem *scu_base_addr(void)
 		return __io_address(REALVIEW_EB11MP_SCU_BASE);
 	else if (machine_is_realview_pb11mp())
 		return __io_address(REALVIEW_TC11MP_SCU_BASE);
+	else if (machine_is_realview_pbx() &&
+		 (core_tile_pbx11mp() || core_tile_pbxa9mp()))
+		return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
 	else
 		return (void __iomem *)0;
 }
 
-static unsigned int __init get_core_count(void)
+static inline unsigned int get_core_count(void)
 {
-	unsigned int ncores;
 	void __iomem *scu_base = scu_base_addr();
-
-	if (scu_base) {
-		ncores = __raw_readl(scu_base + SCU_CONFIG);
-		ncores = (ncores & 0x03) + 1;
-	} else
-		ncores = 1;
-
-	return ncores;
-}
-
-/*
- * Setup the SCU
- */
-static void scu_enable(void)
-{
-	u32 scu_ctrl;
-	void __iomem *scu_base = scu_base_addr();
-
-	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
-	scu_ctrl |= 1;
-	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+	if (scu_base)
+		return scu_get_core_count(scu_base);
+	return 1;
 }
 
 static DEFINE_SPINLOCK(boot_lock);
@@ -184,7 +170,7 @@ void __init smp_init_cpus(void)
 	unsigned int i, ncores = get_core_count();
 
 	for (i = 0; i < ncores; i++)
-		cpu_set(i, cpu_possible_map);
+		set_cpu_possible(i, true);
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -217,19 +203,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	if (max_cpus > ncores)
 		max_cpus = ncores;
 
-#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-	/*
-	 * Enable the local timer or broadcast device for the boot CPU.
-	 */
-	local_timer_setup();
-#endif
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
 	 */
 	for (i = 0; i < max_cpus; i++)
-		cpu_set(i, cpu_present_map);
+		set_cpu_present(i, true);
 
 	/*
 	 * Initialise the SCU if there are more than one CPU and let
@@ -239,7 +218,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	 * WFI
 	 */
 	if (max_cpus > 1) {
-		scu_enable();
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		scu_enable(scu_base_addr());
 		poke_milo();
 	}
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index c20fbef122b..8dfa44e08a9 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -32,6 +32,7 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index a64b84a7a3d..25efe71a67c 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -203,11 +203,23 @@ static struct amba_device *amba_devs[] __initdata = {
 /*
  * RealView PB1176 platform devices
  */
-static struct resource realview_pb1176_flash_resource = {
-	.start			= REALVIEW_PB1176_FLASH_BASE,
-	.end			= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
+static struct resource realview_pb1176_flash_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PB1176_FLASH_BASE,
+		.end		= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= REALVIEW_PB1176_SEC_FLASH_BASE,
+		.end		= REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
 };
+#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
+#define PB1176_FLASH_BLOCKS	2
+#else
+#define PB1176_FLASH_BLOCKS	1
+#endif
 
 static struct resource realview_pb1176_smsc911x_resources[] = {
 	[0] = {
@@ -271,7 +283,8 @@ static void __init realview_pb1176_init(void)
 	l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
 #endif
 
-	realview_flash_register(&realview_pb1176_flash_resource, 1);
+	realview_flash_register(realview_pb1176_flash_resources,
+				PB1176_FLASH_BLOCKS);
 	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	realview_usb_register(realview_pb1176_isp1761_resources);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index ea1e60eca35..dc4b1694390 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -32,6 +32,7 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
new file mode 100644
index 00000000000..1fe294d0bf9
--- /dev/null
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -0,0 +1,335 @@
+/*
+ *  arch/arm/mach-realview/realview_pbx.c
+ *
+ *  Copyright (C) 2009 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/board-pbx.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+
+static struct map_desc realview_pbx_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_PCI
+	{
+		.virtual	= PCIX_UNIT_BASE,
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_PCI_BASE),
+		.length		= REALVIEW_PBX_PCI_BASE_SIZE,
+		.type		= MT_DEVICE,
+	},
+#endif
+#ifdef CONFIG_DEBUG_LL
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#endif
+};
+
+static struct map_desc realview_local_io_desc[] __initdata = {
+	{
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+		.length         = SZ_4K,
+		.type           = MT_DEVICE,
+	}, {
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+		.length         = SZ_4K,
+		.type           = MT_DEVICE,
+	}, {
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
+		.length         = SZ_8K,
+		.type           = MT_DEVICE,
+	}
+};
+
+static void __init realview_pbx_map_io(void)
+{
+	iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
+}
+
+/*
+ * RealView PBXCore AMBA devices
+ */
+
+#define GPIO2_IRQ		{ IRQ_PBX_GPIO2, NO_IRQ }
+#define GPIO2_DMA		{ 0, 0 }
+#define GPIO3_IRQ		{ IRQ_PBX_GPIO3, NO_IRQ }
+#define GPIO3_DMA		{ 0, 0 }
+#define AACI_IRQ		{ IRQ_PBX_AACI, NO_IRQ }
+#define AACI_DMA		{ 0x80, 0x81 }
+#define MMCI0_IRQ		{ IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
+#define MMCI0_DMA		{ 0x84, 0 }
+#define KMI0_IRQ		{ IRQ_PBX_KMI0, NO_IRQ }
+#define KMI0_DMA		{ 0, 0 }
+#define KMI1_IRQ		{ IRQ_PBX_KMI1, NO_IRQ }
+#define KMI1_DMA		{ 0, 0 }
+#define PBX_SMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define PBX_SMC_DMA		{ 0, 0 }
+#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define MPMC_DMA		{ 0, 0 }
+#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD, NO_IRQ }
+#define PBX_CLCD_DMA		{ 0, 0 }
+#define DMAC_IRQ		{ IRQ_PBX_DMAC, NO_IRQ }
+#define DMAC_DMA		{ 0, 0 }
+#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
+#define SCTL_DMA		{ 0, 0 }
+#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG, NO_IRQ }
+#define PBX_WATCHDOG_DMA	{ 0, 0 }
+#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0, NO_IRQ }
+#define PBX_GPIO0_DMA		{ 0, 0 }
+#define GPIO1_IRQ		{ IRQ_PBX_GPIO1, NO_IRQ }
+#define GPIO1_DMA		{ 0, 0 }
+#define PBX_RTC_IRQ		{ IRQ_PBX_RTC, NO_IRQ }
+#define PBX_RTC_DMA		{ 0, 0 }
+#define SCI_IRQ			{ IRQ_PBX_SCI, NO_IRQ }
+#define SCI_DMA			{ 7, 6 }
+#define PBX_UART0_IRQ		{ IRQ_PBX_UART0, NO_IRQ }
+#define PBX_UART0_DMA		{ 15, 14 }
+#define PBX_UART1_IRQ		{ IRQ_PBX_UART1, NO_IRQ }
+#define PBX_UART1_DMA		{ 13, 12 }
+#define PBX_UART2_IRQ		{ IRQ_PBX_UART2, NO_IRQ }
+#define PBX_UART2_DMA		{ 11, 10 }
+#define PBX_UART3_IRQ		{ IRQ_PBX_UART3, NO_IRQ }
+#define PBX_UART3_DMA		{ 0x86, 0x87 }
+#define PBX_SSP_IRQ		{ IRQ_PBX_SSP, NO_IRQ }
+#define PBX_SSP_DMA		{ 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	NULL);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:f2",	PBX_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:f3",	PBX_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:f4",	PBX_SSP,	NULL);
+
+/* Primecells on the NEC ISSP chip */
+AMBA_DEVICE(clcd,	"issp:20",	PBX_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&dmac_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+	&smc_device,
+	&clcd_device,
+	&sctl_device,
+	&wdog_device,
+	&gpio0_device,
+	&gpio1_device,
+	&gpio2_device,
+	&rtc_device,
+	&sci0_device,
+	&ssp0_device,
+	&aaci_device,
+	&mmc0_device,
+	&kmi0_device,
+	&kmi1_device,
+};
+
+/*
+ * RealView PB-X platform devices
+ */
+static struct resource realview_pbx_flash_resources[] = {
+	[0] = {
+		.start          = REALVIEW_PBX_FLASH0_BASE,
+		.end            = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start          = REALVIEW_PBX_FLASH1_BASE,
+		.end            = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct resource realview_pbx_smsc911x_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBX_ETH_BASE,
+		.end		= REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PBX_ETH,
+		.end		= IRQ_PBX_ETH,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource realview_pbx_isp1761_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBX_USB_BASE,
+		.end		= REALVIEW_PBX_USB_BASE + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PBX_USB,
+		.end		= IRQ_PBX_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static void __init gic_init_irq(void)
+{
+	/* ARM PBX on-board GIC */
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
+		gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE);
+		gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+			      29);
+		gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
+	} else {
+		gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE);
+		gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE),
+			      IRQ_PBX_GIC_START);
+		gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE));
+	}
+}
+
+static void __init realview_pbx_timer_init(void)
+{
+	timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
+	timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
+	timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
+	timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
+
+#ifdef CONFIG_LOCAL_TIMERS
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+		twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE);
+#endif
+	realview_timer_init(IRQ_PBX_TIMER0_1);
+}
+
+static struct sys_timer realview_pbx_timer = {
+	.init		= realview_pbx_timer_init,
+};
+
+static void __init realview_pbx_init(void)
+{
+	int i;
+
+#ifdef CONFIG_CACHE_L2X0
+	if (core_tile_pbxa9mp()) {
+		void __iomem *l2x0_base =
+			__io_address(REALVIEW_PBX_TILE_L220_BASE);
+
+		/* set RAM latencies to 1 cycle for eASIC */
+		writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+		writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+		/* 16KB way size, 8-way associativity, parity disabled
+		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
+		l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
+	}
+#endif
+
+	realview_flash_register(realview_pbx_flash_resources,
+				ARRAY_SIZE(realview_pbx_flash_resources));
+	realview_eth_register(NULL, realview_pbx_smsc911x_resources);
+	platform_device_register(&realview_i2c_device);
+	platform_device_register(&realview_cf_device);
+	realview_usb_register(realview_pbx_isp1761_resources);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+#ifdef CONFIG_LEDS
+	leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_io	= REALVIEW_PBX_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= realview_pbx_map_io,
+	.init_irq	= gic_init_irq,
+	.timer		= &realview_pbx_timer,
+	.init_machine	= realview_pbx_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 7a7ed4174c8..6c68e78f359 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -33,10 +33,10 @@
 
 int s3c2400_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
-		return -1;  /* not valid interrupts */
+	if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7))
+		return -EINVAL;  /* not valid interrupts */
 
-	return (pin - S3C2410_GPE0) + IRQ_EINT0;
+	return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
 }
 
 EXPORT_SYMBOL(s3c2400_gpio_getirq);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 63a30d1dd42..41bb65d5b91 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -59,6 +59,7 @@ config ARCH_H1940
 	bool "IPAQ H1940"
 	select CPU_S3C2410
 	select PM_H1940 if PM
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -70,6 +71,7 @@ config PM_H1940
 config MACH_N30
 	bool "Acer N30 family"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
@@ -82,6 +84,7 @@ config ARCH_BAST
 	select MACH_BAST_IDE
 	select S3C24XX_DCLK
 	select ISA
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -89,6 +92,7 @@ config ARCH_BAST
 config MACH_OTOM
  	bool "NexVision OTOM Board"
  	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision OTOM board
 
@@ -96,6 +100,7 @@ config MACH_AML_M5900
 	bool "AML M5900 Series"
 	select CPU_S3C2410
 	select PM_SIMTEC if PM
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the American Microsystems M5900 Series
            <http://www.amltd.com>
@@ -111,6 +116,7 @@ config BAST_PC104_IRQ
 config MACH_TCT_HAMMER
 	bool "TCT Hammer Board"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the TinCanTools Hammer Board
            <http://www.tincantools.com>
@@ -122,12 +128,14 @@ config MACH_VR1000
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
 config MACH_QT2410
 	bool "QT2410"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the Armzone QT2410
 
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 440c014e24b..dbf96e60d99 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -17,14 +17,16 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
+#include <mach/map.h>
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 36a3132f39e..7974afca297 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -39,12 +39,12 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 	unsigned long flags;
 	unsigned long val;
 
-	if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
-		return -1;
+	if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
+		return -EINVAL;
 
 	config &= 0xff;
 
-	pin -= S3C2410_GPG8;
+	pin -= S3C2410_GPG(8);
 	reg += pin & ~3;
 
 	local_irq_save(flags);
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5a6bc56f186..5aabf117cbb 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -16,6 +16,8 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
+
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>
@@ -41,9 +43,9 @@ static void h1940bt_enable(int on)
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 
 		state = 1;
 	}
@@ -52,9 +54,9 @@ static void h1940bt_enable(int on)
 		led_trigger_event(bt_led_trigger, 0);
 #endif
 
-		s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
 
@@ -87,14 +89,14 @@ static DEVICE_ATTR(enable, 0644,
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
 	/* Configures BT serial port GPIOs */
-	s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
-	s3c2410_gpio_pullup(S3C2410_GPH0, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
-	s3c2410_gpio_pullup(S3C2410_GPH1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH2, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH3, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+	s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
 #ifdef CONFIG_LEDS_H1940
 	led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 13358ce2128..c3a2629e0de 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -3,7 +3,7 @@
  * Copyright (C) 2003,2004,2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C241XX DMA support
+ * Samsung S3C24XX DMA support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -13,8 +13,8 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
+#include <plat/dma.h>
 #include <linux/sysdev.h>
-#include <mach/hardware.h>
 
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
@@ -55,9 +55,9 @@ enum dma_ch {
 
 /* we have 4 dma channels */
 #ifndef CONFIG_CPU_S3C2443
-#define S3C2410_DMA_CHANNELS		(4)
+#define S3C_DMA_CHANNELS		(4)
 #else
-#define S3C2410_DMA_CHANNELS		(6)
+#define S3C_DMA_CHANNELS		(6)
 #endif
 
 /* types */
@@ -68,7 +68,6 @@ enum s3c2410_dma_state {
 	S3C2410_DMA_PAUSED
 };
 
-
 /* enum s3c2410_dma_loadst
  *
  * This represents the state of the DMA engine, wrt to the loaded / running
@@ -104,32 +103,6 @@ enum s3c2410_dma_loadst {
 	S3C2410_DMALOAD_1LOADED_1RUNNING,
 };
 
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
 
 /* flags */
 
@@ -139,17 +112,14 @@ enum s3c2410_chan_op {
 
 /* dma buffer */
 
-struct s3c2410_dma_client {
-	char                *name;
-};
+struct s3c2410_dma_buf;
 
-/* s3c2410_dma_buf_s
+/* s3c2410_dma_buf
  *
  * internally used buffer structure to describe a queued or running
  * buffer.
 */
 
-struct s3c2410_dma_buf;
 struct s3c2410_dma_buf {
 	struct s3c2410_dma_buf	*next;
 	int			 magic;		/* magic */
@@ -161,20 +131,6 @@ struct s3c2410_dma_buf {
 
 /* [1] is this updated for both recv/send modes? */
 
-struct s3c2410_dma_chan;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
 struct s3c2410_dma_stats {
 	unsigned long		loads;
 	unsigned long		timeout_longest;
@@ -206,10 +162,10 @@ struct s3c2410_dma_chan {
 
 	/* channel configuration */
 	enum s3c2410_dmasrc	 source;
+	enum dma_ch		 req_ch;
 	unsigned long		 dev_addr;
 	unsigned long		 load_timeout;
 	unsigned int		 flags;		/* channel flags */
-	unsigned int		 hw_cfg;	/* last hw config */
 
 	struct s3c24xx_dma_map	*map;		/* channel hw maps */
 
@@ -236,213 +192,6 @@ struct s3c2410_dma_chan {
 	struct sys_device	dev;
 };
 
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-/* note, we don't really use dma_device_t at the moment */
 typedef unsigned long dma_device_t;
 
-/* functions --------------------------------------------------------------- */
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(unsigned int channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(unsigned int channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
-				 int hwcfg, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(unsigned int channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC       (0x00)
-#define S3C2410_DMA_DISRCC      (0x04)
-#define S3C2410_DMA_DIDST       (0x08)
-#define S3C2410_DMA_DIDSTC      (0x0C)
-#define S3C2410_DMA_DCON        (0x10)
-#define S3C2410_DMA_DSTAT       (0x14)
-#define S3C2410_DMA_DCSRC       (0x18)
-#define S3C2410_DMA_DCDST       (0x1C)
-#define S3C2410_DMA_DMASKTRIG   (0x20)
-#define S3C2412_DMA_DMAREQSEL	(0x24)
-#define S3C2443_DMA_DMAREQSEL	(0x24)
-
-#define S3C2410_DISRCC_INC	(1<<0)
-#define S3C2410_DISRCC_APB	(1<<1)
-
-#define S3C2410_DMASKTRIG_STOP   (1<<2)
-#define S3C2410_DMASKTRIG_ON     (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND     (0<<31)
-#define S3C2410_DCON_HANDSHAKE  (1<<31)
-#define S3C2410_DCON_SYNC_PCLK  (0<<30)
-#define S3C2410_DCON_SYNC_HCLK  (1<<30)
-
-#define S3C2410_DCON_INTREQ     (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
-#define S3C2410_DCON_CH0_UART0	(1<<24)
-#define S3C2410_DCON_CH0_SDI	(2<<24)
-#define S3C2410_DCON_CH0_TIMER	(3<<24)
-#define S3C2410_DCON_CH0_USBEP1	(4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
-#define S3C2410_DCON_CH1_UART1	(1<<24)
-#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
-#define S3C2410_DCON_CH1_SPI	(3<<24)
-#define S3C2410_DCON_CH1_USBEP2	(4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
-#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
-#define S3C2410_DCON_CH2_SDI	(2<<24)
-#define S3C2410_DCON_CH2_TIMER	(3<<24)
-#define S3C2410_DCON_CH2_USBEP3	(4<<24)
-
-#define S3C2410_DCON_CH3_UART2	(0<<24)
-#define S3C2410_DCON_CH3_SDI	(1<<24)
-#define S3C2410_DCON_CH3_SPI	(2<<24)
-#define S3C2410_DCON_CH3_TIMER	(3<<24)
-#define S3C2410_DCON_CH3_USBEP4	(4<<24)
-
-#define S3C2410_DCON_SRCSHIFT   (24)
-#define S3C2410_DCON_SRCMASK	(7<<24)
-
-#define S3C2410_DCON_BYTE       (0<<20)
-#define S3C2410_DCON_HALFWORD   (1<<20)
-#define S3C2410_DCON_WORD       (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD   (1<<22)
-#define S3C2410_DCON_HWTRIG     (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT	(1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
-#define S3C2440_DCON_CH0_PCMIN	(6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
-#define S3C2440_DCON_CH1_SDI	(6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN	(5<<24)
-#define S3C2440_DCON_CH2_MICIN	(6<<24)
-
-#define S3C2440_DCON_CH3_MICIN	(5<<24)
-#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 6c9fbb99ef1..8fe192081d3 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -24,7 +24,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
 {
 	struct s3c_gpio_chip *chip;
 
-	if (pin > S3C2410_GPG10)
+	if (pin > S3C2410_GPG(10))
 		return NULL;
 
 	chip = &s3c24xx_gpios[pin/32];
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
new file mode 100644
index 00000000000..801dff13858
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -0,0 +1,103 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003,2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+*/
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ *	< 0 => error code
+ *	  0 => enabled
+ *	  1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index ce1ec69806a..2edbb9c88ab 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -11,6 +11,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __MACH_GPIONRS_H
+#define __MACH_GPIONRS_H
+
 #define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
 
 #define S3C2410_GPIO_BANKA   (32*0)
@@ -21,3 +24,70 @@
 #define S3C2410_GPIO_BANKF   (32*5)
 #define S3C2410_GPIO_BANKG   (32*6)
 #define S3C2410_GPIO_BANKH   (32*7)
+
+/* GPIO bank sizes */
+#define S3C2410_GPIO_A_NR	(32)
+#define S3C2410_GPIO_B_NR	(32)
+#define S3C2410_GPIO_C_NR	(32)
+#define S3C2410_GPIO_D_NR	(32)
+#define S3C2410_GPIO_E_NR	(32)
+#define S3C2410_GPIO_F_NR	(32)
+#define S3C2410_GPIO_G_NR	(32)
+#define S3C2410_GPIO_H_NR	(32)
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+	S3C2410_GPIO_A_START = 0,
+	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
+
+/* compatibility until drivers can be modified */
+
+#define S3C2410_GPA0	S3C2410_GPA(0)
+#define S3C2410_GPA1	S3C2410_GPA(1)
+#define S3C2410_GPA3	S3C2410_GPA(3)
+#define S3C2410_GPA7	S3C2410_GPA(7)
+
+#define S3C2410_GPE0	S3C2410_GPE(0)
+#define S3C2410_GPE1	S3C2410_GPE(1)
+#define S3C2410_GPE2	S3C2410_GPE(2)
+#define S3C2410_GPE3	S3C2410_GPE(3)
+#define S3C2410_GPE4	S3C2410_GPE(4)
+#define S3C2410_GPE5	S3C2410_GPE(5)
+#define S3C2410_GPE6	S3C2410_GPE(6)
+#define S3C2410_GPE7	S3C2410_GPE(7)
+#define S3C2410_GPE8	S3C2410_GPE(8)
+#define S3C2410_GPE9	S3C2410_GPE(9)
+#define S3C2410_GPE10	S3C2410_GPE(10)
+
+#define S3C2410_GPH10	S3C2410_GPH(10)
+
+#endif /* __MACH_GPIONRS_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 51a88cf9526..15f0b3e7ce6 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -24,5 +24,6 @@
 
 #include <asm-generic/gpio.h>
 #include <mach/gpio-nrs.h>
+#include <mach/gpio-fns.h>
 
 #define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
index 74d5a1a4024..aef5631eac5 100644
--- a/arch/arm/mach-s3c2410/include/mach/hardware.h
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -15,101 +15,6 @@
 
 #ifndef __ASSEMBLY__
 
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irq2pin
- *
- * turn the given irq number into the corresponding GPIO number
- *
- * returns:
- *	< 0 = no pin
- *	>=0 = gpio pin number
-*/
-
-extern int s3c2410_gpio_irq2pin(unsigned int irq);
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- *	< 0 => error code
- *	  0 => enabled
- *	  1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
 extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
 
 #ifdef CONFIG_CPU_S3C2440
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 255fdfeaf95..e99b212cb1c 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -84,7 +84,6 @@
 
 #define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
 #define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
 #define S3C24XX_PA_DMA      S3C2410_PA_DMA
 #define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
 #define S3C24XX_PA_LCD      S3C2410_PA_LCD
@@ -102,6 +101,7 @@
 
 #define S3C_PA_IIC          S3C2410_PA_IIC
 #define S3C_PA_UART	    S3C24XX_PA_UART
+#define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 35a03df473f..b278d0c45cc 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -69,104 +69,58 @@
 #define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
 #define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
 
-#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
-#define S3C2410_GPA0_OUT     (0<<0)
 #define S3C2410_GPA0_ADDR0   (1<<0)
 
-#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
-#define S3C2410_GPA1_OUT     (0<<1)
 #define S3C2410_GPA1_ADDR16  (1<<1)
 
-#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
-#define S3C2410_GPA2_OUT     (0<<2)
 #define S3C2410_GPA2_ADDR17  (1<<2)
 
-#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
-#define S3C2410_GPA3_OUT     (0<<3)
 #define S3C2410_GPA3_ADDR18  (1<<3)
 
-#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
-#define S3C2410_GPA4_OUT     (0<<4)
 #define S3C2410_GPA4_ADDR19  (1<<4)
 
-#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
-#define S3C2410_GPA5_OUT     (0<<5)
 #define S3C2410_GPA5_ADDR20  (1<<5)
 
-#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
-#define S3C2410_GPA6_OUT     (0<<6)
 #define S3C2410_GPA6_ADDR21  (1<<6)
 
-#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
-#define S3C2410_GPA7_OUT     (0<<7)
 #define S3C2410_GPA7_ADDR22  (1<<7)
 
-#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
-#define S3C2410_GPA8_OUT     (0<<8)
 #define S3C2410_GPA8_ADDR23  (1<<8)
 
-#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
-#define S3C2410_GPA9_OUT     (0<<9)
 #define S3C2410_GPA9_ADDR24  (1<<9)
 
-#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
-#define S3C2410_GPA10_OUT    (0<<10)
 #define S3C2410_GPA10_ADDR25 (1<<10)
 #define S3C2400_GPA10_SCKE   (1<<10)
 
-#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
-#define S3C2410_GPA11_OUT    (0<<11)
 #define S3C2410_GPA11_ADDR26 (1<<11)
 #define S3C2400_GPA11_nCAS0  (1<<11)
 
-#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
-#define S3C2410_GPA12_OUT    (0<<12)
 #define S3C2410_GPA12_nGCS1  (1<<12)
 #define S3C2400_GPA12_nCAS1  (1<<12)
 
-#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
-#define S3C2410_GPA13_OUT    (0<<13)
 #define S3C2410_GPA13_nGCS2  (1<<13)
 #define S3C2400_GPA13_nGCS1  (1<<13)
 
-#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
-#define S3C2410_GPA14_OUT    (0<<14)
 #define S3C2410_GPA14_nGCS3  (1<<14)
 #define S3C2400_GPA14_nGCS2  (1<<14)
 
-#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
-#define S3C2410_GPA15_OUT    (0<<15)
 #define S3C2410_GPA15_nGCS4  (1<<15)
 #define S3C2400_GPA15_nGCS3  (1<<15)
 
-#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
-#define S3C2410_GPA16_OUT    (0<<16)
 #define S3C2410_GPA16_nGCS5  (1<<16)
 #define S3C2400_GPA16_nGCS4  (1<<16)
 
-#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
-#define S3C2410_GPA17_OUT    (0<<17)
 #define S3C2410_GPA17_CLE    (1<<17)
 #define S3C2400_GPA17_nGCS5  (1<<17)
 
-#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
-#define S3C2410_GPA18_OUT    (0<<18)
 #define S3C2410_GPA18_ALE    (1<<18)
 
-#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
-#define S3C2410_GPA19_OUT    (0<<19)
 #define S3C2410_GPA19_nFWE   (1<<19)
 
-#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
-#define S3C2410_GPA20_OUT    (0<<20)
 #define S3C2410_GPA20_nFRE   (1<<20)
 
-#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
-#define S3C2410_GPA21_OUT    (0<<21)
 #define S3C2410_GPA21_nRSTOUT (1<<21)
 
-#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
-#define S3C2410_GPA22_OUT    (0<<22)
 #define S3C2410_GPA22_nFCE   (1<<22)
 
 /* 0x08 and 0x0c are reserved on S3C2410 */
@@ -194,107 +148,69 @@
 
 /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
 
-#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
-#define S3C2410_GPB0_INP     (0x00 << 0)
-#define S3C2410_GPB0_OUTP    (0x01 << 0)
 #define S3C2410_GPB0_TOUT0   (0x02 << 0)
 #define S3C2400_GPB0_DATA16  (0x02 << 0)
 
-#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
-#define S3C2410_GPB1_INP     (0x00 << 2)
-#define S3C2410_GPB1_OUTP    (0x01 << 2)
 #define S3C2410_GPB1_TOUT1   (0x02 << 2)
 #define S3C2400_GPB1_DATA17  (0x02 << 2)
 
-#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
-#define S3C2410_GPB2_INP     (0x00 << 4)
-#define S3C2410_GPB2_OUTP    (0x01 << 4)
 #define S3C2410_GPB2_TOUT2   (0x02 << 4)
 #define S3C2400_GPB2_DATA18  (0x02 << 4)
 #define S3C2400_GPB2_TCLK1   (0x03 << 4)
 
-#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
-#define S3C2410_GPB3_INP     (0x00 << 6)
-#define S3C2410_GPB3_OUTP    (0x01 << 6)
 #define S3C2410_GPB3_TOUT3   (0x02 << 6)
 #define S3C2400_GPB3_DATA19  (0x02 << 6)
 #define S3C2400_GPB3_TXD1    (0x03 << 6)
 
-#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
-#define S3C2410_GPB4_INP     (0x00 << 8)
-#define S3C2410_GPB4_OUTP    (0x01 << 8)
 #define S3C2410_GPB4_TCLK0   (0x02 << 8)
 #define S3C2400_GPB4_DATA20  (0x02 << 8)
 #define S3C2410_GPB4_MASK    (0x03 << 8)
 #define S3C2400_GPB4_RXD1    (0x03 << 8)
 #define S3C2400_GPB4_MASK    (0x03 << 8)
 
-#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
-#define S3C2410_GPB5_INP     (0x00 << 10)
-#define S3C2410_GPB5_OUTP    (0x01 << 10)
 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
 #define S3C2443_GPB5_XBACK   (0x03 << 10)
 #define S3C2400_GPB5_DATA21  (0x02 << 10)
 #define S3C2400_GPB5_nCTS1   (0x03 << 10)
 
-#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
-#define S3C2410_GPB6_INP     (0x00 << 12)
-#define S3C2410_GPB6_OUTP    (0x01 << 12)
 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
 #define S3C2443_GPB6_XBREQ   (0x03 << 12)
 #define S3C2400_GPB6_DATA22  (0x02 << 12)
 #define S3C2400_GPB6_nRTS1   (0x03 << 12)
 
-#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
-#define S3C2410_GPB7_INP     (0x00 << 14)
-#define S3C2410_GPB7_OUTP    (0x01 << 14)
 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
 #define S3C2443_GPB7_XDACK1  (0x03 << 14)
 #define S3C2400_GPB7_DATA23  (0x02 << 14)
 
-#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
-#define S3C2410_GPB8_INP     (0x00 << 16)
-#define S3C2410_GPB8_OUTP    (0x01 << 16)
 #define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
 #define S3C2400_GPB8_DATA24  (0x02 << 16)
 
-#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
-#define S3C2410_GPB9_INP     (0x00 << 18)
-#define S3C2410_GPB9_OUTP    (0x01 << 18)
 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
 #define S3C2443_GPB9_XDACK0  (0x03 << 18)
 #define S3C2400_GPB9_DATA25  (0x02 << 18)
 #define S3C2400_GPB9_I2SSDI  (0x03 << 18)
 
-#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
-#define S3C2410_GPB10_INP    (0x00 << 20)
-#define S3C2410_GPB10_OUTP   (0x01 << 20)
 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
 #define S3C2443_GPB10_XDREQ0 (0x03 << 20)
 #define S3C2400_GPB10_DATA26 (0x02 << 20)
 #define S3C2400_GPB10_nSS    (0x03 << 20)
 
-#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
 #define S3C2400_GPB11_INP    (0x00 << 22)
 #define S3C2400_GPB11_OUTP   (0x01 << 22)
 #define S3C2400_GPB11_DATA27 (0x02 << 22)
 
-#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
 #define S3C2400_GPB12_INP    (0x00 << 24)
 #define S3C2400_GPB12_OUTP   (0x01 << 24)
 #define S3C2400_GPB12_DATA28 (0x02 << 24)
 
-#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
 #define S3C2400_GPB13_INP    (0x00 << 26)
 #define S3C2400_GPB13_OUTP   (0x01 << 26)
 #define S3C2400_GPB13_DATA29 (0x02 << 26)
 
-#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
 #define S3C2400_GPB14_INP    (0x00 << 28)
 #define S3C2400_GPB14_OUTP   (0x01 << 28)
 #define S3C2400_GPB14_DATA30 (0x02 << 28)
 
-#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
 #define S3C2400_GPB15_INP    (0x00 << 30)
 #define S3C2400_GPB15_OUTP   (0x01 << 30)
 #define S3C2400_GPB15_DATA31 (0x02 << 30)
@@ -315,99 +231,51 @@
 #define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
 #define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
 
-#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
-#define S3C2410_GPC0_INP	(0x00 << 0)
-#define S3C2410_GPC0_OUTP	(0x01 << 0)
 #define S3C2410_GPC0_LEND	(0x02 << 0)
 #define S3C2400_GPC0_VD0 	(0x02 << 0)
 
-#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
-#define S3C2410_GPC1_INP	(0x00 << 2)
-#define S3C2410_GPC1_OUTP	(0x01 << 2)
 #define S3C2410_GPC1_VCLK	(0x02 << 2)
 #define S3C2400_GPC1_VD1 	(0x02 << 2)
 
-#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
-#define S3C2410_GPC2_INP	(0x00 << 4)
-#define S3C2410_GPC2_OUTP	(0x01 << 4)
 #define S3C2410_GPC2_VLINE	(0x02 << 4)
 #define S3C2400_GPC2_VD2  	(0x02 << 4)
 
-#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
-#define S3C2410_GPC3_INP	(0x00 << 6)
-#define S3C2410_GPC3_OUTP	(0x01 << 6)
 #define S3C2410_GPC3_VFRAME	(0x02 << 6)
 #define S3C2400_GPC3_VD3   	(0x02 << 6)
 
-#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
-#define S3C2410_GPC4_INP	(0x00 << 8)
-#define S3C2410_GPC4_OUTP	(0x01 << 8)
 #define S3C2410_GPC4_VM		(0x02 << 8)
 #define S3C2400_GPC4_VD4	(0x02 << 8)
 
-#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
-#define S3C2410_GPC5_INP	(0x00 << 10)
-#define S3C2410_GPC5_OUTP	(0x01 << 10)
 #define S3C2410_GPC5_LCDVF0	(0x02 << 10)
 #define S3C2400_GPC5_VD5   	(0x02 << 10)
 
-#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
-#define S3C2410_GPC6_INP	(0x00 << 12)
-#define S3C2410_GPC6_OUTP	(0x01 << 12)
 #define S3C2410_GPC6_LCDVF1	(0x02 << 12)
 #define S3C2400_GPC6_VD6   	(0x02 << 12)
 
-#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
-#define S3C2410_GPC7_INP	(0x00 << 14)
-#define S3C2410_GPC7_OUTP	(0x01 << 14)
 #define S3C2410_GPC7_LCDVF2	(0x02 << 14)
 #define S3C2400_GPC7_VD7   	(0x02 << 14)
 
-#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
-#define S3C2410_GPC8_INP	(0x00 << 16)
-#define S3C2410_GPC8_OUTP	(0x01 << 16)
 #define S3C2410_GPC8_VD0	(0x02 << 16)
 #define S3C2400_GPC8_VD8	(0x02 << 16)
 
-#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
-#define S3C2410_GPC9_INP	(0x00 << 18)
-#define S3C2410_GPC9_OUTP	(0x01 << 18)
 #define S3C2410_GPC9_VD1	(0x02 << 18)
 #define S3C2400_GPC9_VD9	(0x02 << 18)
 
-#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
-#define S3C2410_GPC10_INP	(0x00 << 20)
-#define S3C2410_GPC10_OUTP	(0x01 << 20)
 #define S3C2410_GPC10_VD2	(0x02 << 20)
 #define S3C2400_GPC10_VD10	(0x02 << 20)
 
-#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
-#define S3C2410_GPC11_INP	(0x00 << 22)
-#define S3C2410_GPC11_OUTP	(0x01 << 22)
 #define S3C2410_GPC11_VD3	(0x02 << 22)
 #define S3C2400_GPC11_VD11	(0x02 << 22)
 
-#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
-#define S3C2410_GPC12_INP	(0x00 << 24)
-#define S3C2410_GPC12_OUTP	(0x01 << 24)
 #define S3C2410_GPC12_VD4	(0x02 << 24)
 #define S3C2400_GPC12_VD12	(0x02 << 24)
 
-#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
-#define S3C2410_GPC13_INP	(0x00 << 26)
-#define S3C2410_GPC13_OUTP	(0x01 << 26)
 #define S3C2410_GPC13_VD5	(0x02 << 26)
 #define S3C2400_GPC13_VD13	(0x02 << 26)
 
-#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
-#define S3C2410_GPC14_INP	(0x00 << 28)
-#define S3C2410_GPC14_OUTP	(0x01 << 28)
 #define S3C2410_GPC14_VD6	(0x02 << 28)
 #define S3C2400_GPC14_VD14	(0x02 << 28)
 
-#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
-#define S3C2410_GPC15_INP	(0x00 << 30)
-#define S3C2410_GPC15_OUTP	(0x01 << 30)
 #define S3C2410_GPC15_VD7	(0x02 << 30)
 #define S3C2400_GPC15_VD15	(0x02 << 30)
 
@@ -432,99 +300,51 @@
 #define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
 #define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
 
-#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
-#define S3C2410_GPD0_INP	(0x00 << 0)
-#define S3C2410_GPD0_OUTP	(0x01 << 0)
 #define S3C2410_GPD0_VD8	(0x02 << 0)
 #define S3C2400_GPD0_VFRAME	(0x02 << 0)
 #define S3C2442_GPD0_nSPICS1	(0x03 << 0)
 
-#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
-#define S3C2410_GPD1_INP	(0x00 << 2)
-#define S3C2410_GPD1_OUTP	(0x01 << 2)
 #define S3C2410_GPD1_VD9	(0x02 << 2)
 #define S3C2400_GPD1_VM		(0x02 << 2)
 #define S3C2442_GPD1_SPICLK1	(0x03 << 2)
 
-#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
-#define S3C2410_GPD2_INP	(0x00 << 4)
-#define S3C2410_GPD2_OUTP	(0x01 << 4)
 #define S3C2410_GPD2_VD10	(0x02 << 4)
 #define S3C2400_GPD2_VLINE	(0x02 << 4)
 
-#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
-#define S3C2410_GPD3_INP	(0x00 << 6)
-#define S3C2410_GPD3_OUTP	(0x01 << 6)
 #define S3C2410_GPD3_VD11	(0x02 << 6)
 #define S3C2400_GPD3_VCLK	(0x02 << 6)
 
-#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
-#define S3C2410_GPD4_INP	(0x00 << 8)
-#define S3C2410_GPD4_OUTP	(0x01 << 8)
 #define S3C2410_GPD4_VD12	(0x02 << 8)
 #define S3C2400_GPD4_LEND	(0x02 << 8)
 
-#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
-#define S3C2410_GPD5_INP	(0x00 << 10)
-#define S3C2410_GPD5_OUTP	(0x01 << 10)
 #define S3C2410_GPD5_VD13	(0x02 << 10)
 #define S3C2400_GPD5_TOUT0	(0x02 << 10)
 
-#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
-#define S3C2410_GPD6_INP	(0x00 << 12)
-#define S3C2410_GPD6_OUTP	(0x01 << 12)
 #define S3C2410_GPD6_VD14	(0x02 << 12)
 #define S3C2400_GPD6_TOUT1	(0x02 << 12)
 
-#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
-#define S3C2410_GPD7_INP	(0x00 << 14)
-#define S3C2410_GPD7_OUTP	(0x01 << 14)
 #define S3C2410_GPD7_VD15	(0x02 << 14)
 #define S3C2400_GPD7_TOUT2	(0x02 << 14)
 
-#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
-#define S3C2410_GPD8_INP	(0x00 << 16)
-#define S3C2410_GPD8_OUTP	(0x01 << 16)
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 #define S3C2400_GPD8_TOUT3	(0x02 << 16)
 
-#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
-#define S3C2410_GPD9_INP	(0x00 << 18)
-#define S3C2410_GPD9_OUTP	(0x01 << 18)
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 #define S3C2400_GPD9_TCLK0	(0x02 << 18)
 #define S3C2410_GPD9_MASK       (0x03 << 18)
 
-#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
-#define S3C2410_GPD10_INP	(0x00 << 20)
-#define S3C2410_GPD10_OUTP	(0x01 << 20)
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 #define S3C2400_GPD10_nWAIT	(0x02 << 20)
 
-#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
-#define S3C2410_GPD11_INP	(0x00 << 22)
-#define S3C2410_GPD11_OUTP	(0x01 << 22)
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 
-#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
-#define S3C2410_GPD12_INP	(0x00 << 24)
-#define S3C2410_GPD12_OUTP	(0x01 << 24)
 #define S3C2410_GPD12_VD20	(0x02 << 24)
 
-#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
-#define S3C2410_GPD13_INP	(0x00 << 26)
-#define S3C2410_GPD13_OUTP	(0x01 << 26)
 #define S3C2410_GPD13_VD21	(0x02 << 26)
 
-#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
-#define S3C2410_GPD14_INP	(0x00 << 28)
-#define S3C2410_GPD14_OUTP	(0x01 << 28)
 #define S3C2410_GPD14_VD22	(0x02 << 28)
 #define S3C2410_GPD14_nSS1	(0x03 << 28)
 
-#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
-#define S3C2410_GPD15_INP	(0x00 << 30)
-#define S3C2410_GPD15_OUTP	(0x01 << 30)
 #define S3C2410_GPD15_VD23	(0x02 << 30)
 #define S3C2410_GPD15_nSS0	(0x03 << 30)
 
@@ -550,34 +370,22 @@
 #define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
 #define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
 
-#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
-#define S3C2410_GPE0_INP       (0x00 << 0)
-#define S3C2410_GPE0_OUTP      (0x01 << 0)
 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
 #define S3C2443_GPE0_AC_nRESET (0x03 << 0)
 #define S3C2400_GPE0_EINT0     (0x02 << 0)
 #define S3C2410_GPE0_MASK      (0x03 << 0)
 
-#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
-#define S3C2410_GPE1_INP       (0x00 << 2)
-#define S3C2410_GPE1_OUTP      (0x01 << 2)
 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
 #define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
 #define S3C2400_GPE1_EINT1     (0x02 << 2)
 #define S3C2400_GPE1_nSS       (0x03 << 2)
 #define S3C2410_GPE1_MASK      (0x03 << 2)
 
-#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
-#define S3C2410_GPE2_INP       (0x00 << 4)
-#define S3C2410_GPE2_OUTP      (0x01 << 4)
 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
 #define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
 #define S3C2400_GPE2_EINT2     (0x02 << 4)
 #define S3C2400_GPE2_I2SSDI    (0x03 << 4)
 
-#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
-#define S3C2410_GPE3_INP       (0x00 << 6)
-#define S3C2410_GPE3_OUTP      (0x01 << 6)
 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
 #define S3C2443_GPE3_AC_SDI    (0x03 << 6)
 #define S3C2400_GPE3_EINT3     (0x02 << 6)
@@ -585,9 +393,6 @@
 #define S3C2410_GPE3_nSS0      (0x03 << 6)
 #define S3C2410_GPE3_MASK      (0x03 << 6)
 
-#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
-#define S3C2410_GPE4_INP       (0x00 << 8)
-#define S3C2410_GPE4_OUTP      (0x01 << 8)
 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
 #define S3C2443_GPE4_AC_SDO    (0x03 << 8)
 #define S3C2400_GPE4_EINT4     (0x02 << 8)
@@ -595,81 +400,48 @@
 #define S3C2410_GPE4_I2SSDI    (0x03 << 8)
 #define S3C2410_GPE4_MASK      (0x03 << 8)
 
-#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
-#define S3C2410_GPE5_INP       (0x00 << 10)
-#define S3C2410_GPE5_OUTP      (0x01 << 10)
 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
 
-#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
-#define S3C2410_GPE6_INP       (0x00 << 12)
-#define S3C2410_GPE6_OUTP      (0x01 << 12)
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
 #define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
-#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
-#define S3C2410_GPE7_INP       (0x00 << 14)
-#define S3C2410_GPE7_OUTP      (0x01 << 14)
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
 #define S3C2443_GPE7_AC_SDI    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
-#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
-#define S3C2410_GPE8_INP       (0x00 << 16)
-#define S3C2410_GPE8_OUTP      (0x01 << 16)
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
 #define S3C2443_GPE8_AC_SDO    (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
-#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
-#define S3C2410_GPE9_INP       (0x00 << 18)
-#define S3C2410_GPE9_OUTP      (0x01 << 18)
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
 #define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
-#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
-#define S3C2410_GPE10_INP      (0x00 << 20)
-#define S3C2410_GPE10_OUTP     (0x01 << 20)
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
 #define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
-#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
-#define S3C2410_GPE11_INP      (0x00 << 22)
-#define S3C2410_GPE11_OUTP     (0x01 << 22)
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
 #define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
 #define S3C2400_GPE11_nXBREQ   (0x03 << 22)
 
-#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
-#define S3C2410_GPE12_INP      (0x00 << 24)
-#define S3C2410_GPE12_OUTP     (0x01 << 24)
 #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
 
-#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
-#define S3C2410_GPE13_INP      (0x00 << 26)
-#define S3C2410_GPE13_OUTP     (0x01 << 26)
 #define S3C2410_GPE13_SPICLK0  (0x02 << 26)
 
-#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
-#define S3C2410_GPE14_INP      (0x00 << 28)
-#define S3C2410_GPE14_OUTP     (0x01 << 28)
 #define S3C2410_GPE14_IICSCL   (0x02 << 28)
 #define S3C2410_GPE14_MASK     (0x03 << 28)
 
-#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
-#define S3C2410_GPE15_INP      (0x00 << 30)
-#define S3C2410_GPE15_OUTP     (0x01 << 30)
 #define S3C2410_GPE15_IICSDA   (0x02 << 30)
 #define S3C2410_GPE15_MASK     (0x03 << 30)
 
@@ -705,55 +477,31 @@
 #define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
 #define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
 
-#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
-#define S3C2410_GPF0_INP    (0x00 << 0)
-#define S3C2410_GPF0_OUTP   (0x01 << 0)
 #define S3C2410_GPF0_EINT0  (0x02 << 0)
 #define S3C2400_GPF0_RXD0   (0x02 << 0)
 
-#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
-#define S3C2410_GPF1_INP    (0x00 << 2)
-#define S3C2410_GPF1_OUTP   (0x01 << 2)
 #define S3C2410_GPF1_EINT1  (0x02 << 2)
 #define S3C2400_GPF1_RXD1   (0x02 << 2)
 #define S3C2400_GPF1_IICSDA (0x03 << 2)
 
-#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
-#define S3C2410_GPF2_INP    (0x00 << 4)
-#define S3C2410_GPF2_OUTP   (0x01 << 4)
 #define S3C2410_GPF2_EINT2  (0x02 << 4)
 #define S3C2400_GPF2_TXD0   (0x02 << 4)
 
-#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
-#define S3C2410_GPF3_INP    (0x00 << 6)
-#define S3C2410_GPF3_OUTP   (0x01 << 6)
 #define S3C2410_GPF3_EINT3  (0x02 << 6)
 #define S3C2400_GPF3_TXD1   (0x02 << 6)
 #define S3C2400_GPF3_IICSCL (0x03 << 6)
 
-#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
-#define S3C2410_GPF4_INP    (0x00 << 8)
-#define S3C2410_GPF4_OUTP   (0x01 << 8)
 #define S3C2410_GPF4_EINT4  (0x02 << 8)
 #define S3C2400_GPF4_nRTS0  (0x02 << 8)
 #define S3C2400_GPF4_nXBACK (0x03 << 8)
 
-#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
-#define S3C2410_GPF5_INP    (0x00 << 10)
-#define S3C2410_GPF5_OUTP   (0x01 << 10)
 #define S3C2410_GPF5_EINT5  (0x02 << 10)
 #define S3C2400_GPF5_nCTS0  (0x02 << 10)
 #define S3C2400_GPF5_nXBREQ (0x03 << 10)
 
-#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
-#define S3C2410_GPF6_INP    (0x00 << 12)
-#define S3C2410_GPF6_OUTP   (0x01 << 12)
 #define S3C2410_GPF6_EINT6  (0x02 << 12)
 #define S3C2400_GPF6_CLKOUT (0x02 << 12)
 
-#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
-#define S3C2410_GPF7_INP    (0x00 << 14)
-#define S3C2410_GPF7_OUTP   (0x01 << 14)
 #define S3C2410_GPF7_EINT7  (0x02 << 14)
 
 #define S3C2410_GPF_PUPDIS(x)  (1<<(x))
@@ -778,117 +526,69 @@
 #define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
 #define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
 
-#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
-#define S3C2410_GPG0_INP      (0x00 << 0)
-#define S3C2410_GPG0_OUTP     (0x01 << 0)
 #define S3C2410_GPG0_EINT8    (0x02 << 0)
 #define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
 
-#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
-#define S3C2410_GPG1_INP      (0x00 << 2)
-#define S3C2410_GPG1_OUTP     (0x01 << 2)
 #define S3C2410_GPG1_EINT9    (0x02 << 2)
 #define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
 
-#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
-#define S3C2410_GPG2_INP      (0x00 << 4)
-#define S3C2410_GPG2_OUTP     (0x01 << 4)
 #define S3C2410_GPG2_EINT10   (0x02 << 4)
 #define S3C2410_GPG2_nSS0     (0x03 << 4)
 #define S3C2400_GPG2_CDCLK    (0x02 << 4)
 
-#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
-#define S3C2410_GPG3_INP      (0x00 << 6)
-#define S3C2410_GPG3_OUTP     (0x01 << 6)
 #define S3C2410_GPG3_EINT11   (0x02 << 6)
 #define S3C2410_GPG3_nSS1     (0x03 << 6)
 #define S3C2400_GPG3_I2SSDO   (0x02 << 6)
 #define S3C2400_GPG3_I2SSDI   (0x03 << 6)
 
-#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
-#define S3C2410_GPG4_INP      (0x00 << 8)
-#define S3C2410_GPG4_OUTP     (0x01 << 8)
 #define S3C2410_GPG4_EINT12   (0x02 << 8)
 #define S3C2400_GPG4_MMCCLK   (0x02 << 8)
 #define S3C2400_GPG4_I2SSDI   (0x03 << 8)
 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
 #define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
 
-#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
-#define S3C2410_GPG5_INP      (0x00 << 10)
-#define S3C2410_GPG5_OUTP     (0x01 << 10)
 #define S3C2410_GPG5_EINT13   (0x02 << 10)
 #define S3C2400_GPG5_MMCCMD   (0x02 << 10)
 #define S3C2400_GPG5_IICSDA   (0x03 << 10)
 #define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
 
-#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
-#define S3C2410_GPG6_INP      (0x00 << 12)
-#define S3C2410_GPG6_OUTP     (0x01 << 12)
 #define S3C2410_GPG6_EINT14   (0x02 << 12)
 #define S3C2400_GPG6_MMCDAT   (0x02 << 12)
 #define S3C2400_GPG6_IICSCL   (0x03 << 12)
 #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
 
-#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
-#define S3C2410_GPG7_INP      (0x00 << 14)
-#define S3C2410_GPG7_OUTP     (0x01 << 14)
 #define S3C2410_GPG7_EINT15   (0x02 << 14)
 #define S3C2410_GPG7_SPICLK1  (0x03 << 14)
 #define S3C2400_GPG7_SPIMISO  (0x02 << 14)
 #define S3C2400_GPG7_IICSDA   (0x03 << 14)
 
-#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
-#define S3C2410_GPG8_INP      (0x00 << 16)
-#define S3C2410_GPG8_OUTP     (0x01 << 16)
 #define S3C2410_GPG8_EINT16   (0x02 << 16)
 #define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
 #define S3C2400_GPG8_IICSCL   (0x03 << 16)
 
-#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
-#define S3C2410_GPG9_INP      (0x00 << 18)
-#define S3C2410_GPG9_OUTP     (0x01 << 18)
 #define S3C2410_GPG9_EINT17   (0x02 << 18)
 #define S3C2400_GPG9_SPICLK   (0x02 << 18)
 #define S3C2400_GPG9_MMCCLK   (0x03 << 18)
 
-#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
-#define S3C2410_GPG10_INP     (0x00 << 20)
-#define S3C2410_GPG10_OUTP    (0x01 << 20)
 #define S3C2410_GPG10_EINT18  (0x02 << 20)
 
-#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
-#define S3C2410_GPG11_INP     (0x00 << 22)
-#define S3C2410_GPG11_OUTP    (0x01 << 22)
 #define S3C2410_GPG11_EINT19  (0x02 << 22)
 #define S3C2410_GPG11_TCLK1   (0x03 << 22)
 #define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
 
-#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
-#define S3C2410_GPG12_INP     (0x00 << 24)
-#define S3C2410_GPG12_OUTP    (0x01 << 24)
 #define S3C2410_GPG12_EINT20  (0x02 << 24)
 #define S3C2410_GPG12_XMON    (0x03 << 24)
 #define S3C2442_GPG12_nSPICS0 (0x03 << 24)
 #define S3C2443_GPG12_nINPACK (0x03 << 24)
 
-#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
-#define S3C2410_GPG13_INP     (0x00 << 26)
-#define S3C2410_GPG13_OUTP    (0x01 << 26)
 #define S3C2410_GPG13_EINT21  (0x02 << 26)
 #define S3C2410_GPG13_nXPON   (0x03 << 26)
 #define S3C2443_GPG13_CF_nREG (0x03 << 26)
 
-#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
-#define S3C2410_GPG14_INP     (0x00 << 28)
-#define S3C2410_GPG14_OUTP    (0x01 << 28)
 #define S3C2410_GPG14_EINT22  (0x02 << 28)
 #define S3C2410_GPG14_YMON    (0x03 << 28)
 #define S3C2443_GPG14_CF_RESET (0x03 << 28)
 
-#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
-#define S3C2410_GPG15_INP     (0x00 << 30)
-#define S3C2410_GPG15_OUTP    (0x01 << 30)
 #define S3C2410_GPG15_EINT23  (0x02 << 30)
 #define S3C2410_GPG15_nYPON   (0x03 << 30)
 #define S3C2443_GPG15_CF_PWR  (0x03 << 30)
@@ -907,62 +607,29 @@
 #define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
 #define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
 
-#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
-#define S3C2410_GPH0_INP    (0x00 << 0)
-#define S3C2410_GPH0_OUTP   (0x01 << 0)
 #define S3C2410_GPH0_nCTS0  (0x02 << 0)
 
-#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
-#define S3C2410_GPH1_INP    (0x00 << 2)
-#define S3C2410_GPH1_OUTP   (0x01 << 2)
 #define S3C2410_GPH1_nRTS0  (0x02 << 2)
 
-#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
-#define S3C2410_GPH2_INP    (0x00 << 4)
-#define S3C2410_GPH2_OUTP   (0x01 << 4)
 #define S3C2410_GPH2_TXD0   (0x02 << 4)
 
-#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
-#define S3C2410_GPH3_INP    (0x00 << 6)
-#define S3C2410_GPH3_OUTP   (0x01 << 6)
 #define S3C2410_GPH3_RXD0   (0x02 << 6)
 
-#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
-#define S3C2410_GPH4_INP    (0x00 << 8)
-#define S3C2410_GPH4_OUTP   (0x01 << 8)
 #define S3C2410_GPH4_TXD1   (0x02 << 8)
 
-#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
-#define S3C2410_GPH5_INP    (0x00 << 10)
-#define S3C2410_GPH5_OUTP   (0x01 << 10)
 #define S3C2410_GPH5_RXD1   (0x02 << 10)
 
-#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
-#define S3C2410_GPH6_INP    (0x00 << 12)
-#define S3C2410_GPH6_OUTP   (0x01 << 12)
 #define S3C2410_GPH6_TXD2   (0x02 << 12)
 #define S3C2410_GPH6_nRTS1  (0x03 << 12)
 
-#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
-#define S3C2410_GPH7_INP    (0x00 << 14)
-#define S3C2410_GPH7_OUTP   (0x01 << 14)
 #define S3C2410_GPH7_RXD2   (0x02 << 14)
 #define S3C2410_GPH7_nCTS1  (0x03 << 14)
 
-#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
-#define S3C2410_GPH8_INP    (0x00 << 16)
-#define S3C2410_GPH8_OUTP   (0x01 << 16)
 #define S3C2410_GPH8_UCLK   (0x02 << 16)
 
-#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
-#define S3C2410_GPH9_INP      (0x00 << 18)
-#define S3C2410_GPH9_OUTP     (0x01 << 18)
 #define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
 #define S3C2442_GPH9_nSPICS0  (0x03 << 18)
 
-#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
-#define S3C2410_GPH10_INP     (0x00 << 20)
-#define S3C2410_GPH10_OUTP    (0x01 << 20)
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
 
 /* The S3C2412 and S3C2413 move the GPJ register set to after
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index b8687f71c30..6faadcee772 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -11,21 +11,13 @@
 */
 
 #include <mach/hardware.h>
-#include <linux/io.h>
-
-#include <plat/regs-watchdog.h>
-#include <mach/regs-clock.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
+#include <plat/watchdog-reset.h>
 
 extern void (*s3c24xx_reset_hook)(void);
 
 static void
 arch_reset(char mode, const char *cmd)
 {
-	struct clk *wdtclk;
-
 	if (mode == 's') {
 		cpu_reset(0);
 	}
@@ -33,31 +25,7 @@ arch_reset(char mode, const char *cmd)
 	if (s3c24xx_reset_hook)
 		s3c24xx_reset_hook();
 
-	printk("arch_reset: attempting watchdog reset\n");
-
-	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-
-	wdtclk = clk_get(NULL, "watchdog");
-	if (!IS_ERR(wdtclk)) {
-		clk_enable(wdtclk);
-	} else
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-
-	/* put initial values into count and data */
-	__raw_writel(0x80, S3C2410_WTCNT);
-	__raw_writel(0x80, S3C2410_WTDAT);
-
-	/* set the watchdog to go and reset... */
-	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
+	arch_wdt_reset();
 
 	/* we'll take a jump through zero as a poor second */
 	cpu_reset(0);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 6d6995afeb4..06a84adfb13 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
@@ -224,8 +225,8 @@ static void amlm5900_init_pm(void)
 	} else {
 		enable_irq_wake(IRQ_EINT9);
 		/* configure the suspend/resume status pin */
-		s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
-		s3c2410_gpio_pullup(S3C2410_GPF2, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+		s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
 	}
 }
 static void __init amlm5900_init(void)
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 8637dea5e15..ce3baba2cd7 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -212,15 +213,15 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
 {
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
 
 static int bast_pm_resume(struct sys_device *sd)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 	return 0;
 }
 
@@ -591,8 +592,6 @@ static void __init bast_map_io(void)
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-
-	usb_simtec_init();
 }
 
 static void __init bast_init(void)
@@ -607,6 +606,7 @@ static void __init bast_init(void)
 	i2c_register_board_info(0, bast_i2c_devs,
 				ARRAY_SIZE(bast_i2c_devs));
 
+	usb_simtec_init();
 	nor_simtec_init();
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 7a7c4da4c25..d9cd5ddecf4 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -127,7 +127,7 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
 	.udc_command		= h1940_udc_pullup,
-	.vbus_pin		= S3C2410_GPG5,
+	.vbus_pin		= S3C2410_GPG(5),
 	.vbus_pin_inverted	= 1,
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 2b83f870771..0f6ed61af41 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -19,6 +19,7 @@
 
 #include <linux/gpio_keys.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -85,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
 	switch (cmd) {
 	case S3C2410_UDC_P_ENABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
 		break;
 	case S3C2410_UDC_P_DISABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
 		break;
 	case S3C2410_UDC_P_RESET :
 		break;
@@ -99,55 +100,55 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
 	.udc_command		= n30_udc_pullup,
-	.vbus_pin		= S3C2410_GPG1,
+	.vbus_pin		= S3C2410_GPG(1),
 	.vbus_pin_inverted	= 0,
 };
 
 static struct gpio_keys_button n30_buttons[] = {
 	{
-		.gpio		= S3C2410_GPF0,
+		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
 		.desc		= "Power",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG9,
+		.gpio		= S3C2410_GPG(9),
 		.code		= KEY_UP,
 		.desc		= "Thumbwheel Up",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG8,
+		.gpio		= S3C2410_GPG(8),
 		.code		= KEY_DOWN,
 		.desc		= "Thumbwheel Down",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG7,
+		.gpio		= S3C2410_GPG(7),
 		.code		= KEY_ENTER,
 		.desc		= "Thumbwheel Press",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF7,
+		.gpio		= S3C2410_GPF(7),
 		.code		= KEY_HOMEPAGE,
 		.desc		= "Home",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF6,
+		.gpio		= S3C2410_GPF(6),
 		.code		= KEY_CALENDAR,
 		.desc		= "Calendar",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF5,
+		.gpio		= S3C2410_GPF(5),
 		.code		= KEY_ADDRESSBOOK,
 		.desc		= "Contacts",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF4,
+		.gpio		= S3C2410_GPF(4),
 		.code		= KEY_MAIL,
 		.desc		= "Mail",
 		.active_low	= 0,
@@ -169,73 +170,73 @@ static struct platform_device n30_button_device = {
 
 static struct gpio_keys_button n35_buttons[] = {
 	{
-		.gpio		= S3C2410_GPF0,
+		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
 		.desc		= "Power",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG9,
+		.gpio		= S3C2410_GPG(9),
 		.code		= KEY_UP,
 		.desc		= "Joystick Up",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG8,
+		.gpio		= S3C2410_GPG(8),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Down",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG6,
+		.gpio		= S3C2410_GPG(6),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Left",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG5,
+		.gpio		= S3C2410_GPG(5),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Right",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG7,
+		.gpio		= S3C2410_GPG(7),
 		.code		= KEY_ENTER,
 		.desc		= "Joystick Press",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF7,
+		.gpio		= S3C2410_GPF(7),
 		.code		= KEY_HOMEPAGE,
 		.desc		= "Home",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF6,
+		.gpio		= S3C2410_GPF(6),
 		.code		= KEY_CALENDAR,
 		.desc		= "Calendar",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF5,
+		.gpio		= S3C2410_GPF(5),
 		.code		= KEY_ADDRESSBOOK,
 		.desc		= "Contacts",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF4,
+		.gpio		= S3C2410_GPF(4),
 		.code		= KEY_MAIL,
 		.desc		= "Mail",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF3,
+		.gpio		= S3C2410_GPF(3),
 		.code		= SW_RADIO,
 		.desc		= "GPS Antenna",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG2,
+		.gpio		= S3C2410_GPG(2),
 		.code		= SW_HEADPHONE_INSERT,
 		.desc		= "Headphone",
 		.active_low	= 0,
@@ -259,7 +260,7 @@ static struct platform_device n35_button_device = {
 /* This is the bluetooth LED on the device. */
 static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 	.name		= "blue_led",
-	.gpio		= S3C2410_GPG6,
+	.gpio		= S3C2410_GPG(6),
 	.def_trigger	= "",
 };
 
@@ -270,7 +271,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 static struct s3c24xx_led_platdata n30_warning_led_pdata = {
 	.name		= "warning_led",
 	.flags          = S3C24XX_LEDF_ACTLOW,
-	.gpio		= S3C2410_GPD9,
+	.gpio		= S3C2410_GPD(9),
 	.def_trigger	= "",
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 9f1ba9b63f7..2cc9849eb44 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
@@ -198,7 +199,7 @@ static struct platform_device qt2410_cs89x0 = {
 /* LED */
 
 static struct s3c24xx_led_platdata qt2410_pdata_led = {
-	.gpio		= S3C2410_GPB0,
+	.gpio		= S3C2410_GPB(0),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led",
 	.def_trigger	= "timer",
@@ -218,18 +219,18 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
 {
 	switch (cs) {
 	case BITBANG_CS_ACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
 		break;
 	case BITBANG_CS_INACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
 		break;
 	}
 }
 
 static struct s3c2410_spigpio_info spi_gpio_cfg = {
-	.pin_clk	= S3C2410_GPG7,
-	.pin_mosi	= S3C2410_GPG6,
-	.pin_miso	= S3C2410_GPG5,
+	.pin_clk	= S3C2410_GPG(7),
+	.pin_mosi	= S3C2410_GPG(6),
+	.pin_miso	= S3C2410_GPG(5),
 	.chip_select	= &spi_gpio_cs,
 };
 
@@ -346,13 +347,13 @@ static void __init qt2410_machine_init(void)
 	}
 	s3c24xx_fb_set_platdata(&qt2410_fb_info);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
 
 	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
 
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c_pm_init();
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 61a1ea9c5c5..1628cc773a2 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/i2c.h>
 
@@ -277,19 +278,19 @@ static struct platform_device vr1000_dm9k1 = {
 
 static struct s3c24xx_led_platdata vr1000_led1_pdata = {
 	.name		= "led1",
-	.gpio		= S3C2410_GPB0,
+	.gpio		= S3C2410_GPB(0),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led2_pdata = {
 	.name		= "led2",
-	.gpio		= S3C2410_GPB1,
+	.gpio		= S3C2410_GPB(1),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led3_pdata = {
 	.name		= "led3",
-	.gpio		= S3C2410_GPB2,
+	.gpio		= S3C2410_GPB(2),
 	.def_trigger	= "",
 };
 
@@ -355,8 +356,8 @@ static struct clk *vr1000_clocks[] __initdata = {
 
 static void vr1000_power_off(void)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPB9, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
 }
 
 static void __init vr1000_map_io(void)
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 87fc481d92d..143e08a599d 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -25,6 +25,7 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 #include <linux/sysdev.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -76,7 +77,7 @@ static void s3c2410_pm_prepare(void)
 	}
 
 	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+		s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 
 }
 
@@ -91,7 +92,7 @@ static int s3c2410_pm_resume(struct sys_device *dev)
 	__raw_writel(tmp, S3C2410_GSTATUS2);
 
 	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+		s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 8331e8d97e2..6cd9377ddb8 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -18,9 +18,11 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/gpio.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -29,7 +31,6 @@
 
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
-#include <mach/regs-gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -53,9 +54,9 @@ usb_simtec_powercontrol(int port, int to)
 	power_state[port] = to;
 
 	if (power_state[0] && power_state[1])
-		s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+		gpio_set_value(S3C2410_GPB(4), 0);
 	else
-		s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+		gpio_set_value(S3C2410_GPB(4), 1);
 }
 
 static irqreturn_t
@@ -63,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw)
 {
 	struct s3c2410_hcd_info *info = pw;
 
-	if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
+	if (gpio_get_value(S3C2410_GPG(10)) == 0) {
 		pr_debug("usb_simtec: over-current irq (oc detected)\n");
 		s3c2410_usb_report_oc(info, 3);
 	} else {
@@ -106,10 +107,27 @@ static struct s3c2410_hcd_info usb_simtec_info = {
 
 int usb_simtec_init(void)
 {
+	int ret;
+
 	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
-	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPB4_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+	ret = gpio_request(S3C2410_GPB(4), "USB power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPB4\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPG10\n", __func__);
+		gpio_free(S3C2410_GPB(4));
+		return ret;
+	}
+
+	/* turn power on */
+	gpio_direction_output(S3C2410_GPB(4), 1);
+	gpio_direction_input(S3C2410_GPG(10));
+
+	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index ca99564ae4b..63586ffd0ae 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -38,6 +38,7 @@ menu "S3C2412 Machines"
 config MACH_JIVE
 	bool "Logitech Jive"
 	select CPU_S3C2412
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Logitech Jive.
 
@@ -50,6 +51,7 @@ config MACH_SMDK2413
 	select CPU_S3C2412
 	select MACH_S3C2413
 	select MACH_SMDK
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an SMDK2413
 
@@ -72,6 +74,7 @@ config MACH_SMDK2412
 config MACH_VSTMS
 	bool "VMSTMS"
 	select CPU_S3C2412
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an VSTMS board
 
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 9e3478506c6..f8d16fc10bc 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -20,12 +20,13 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 8f0d37d43b4..8df506eac90 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -356,8 +357,8 @@ static void jive_lcm_reset(unsigned int set)
 {
 	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
 
-	s3c2410_gpio_setpin(S3C2410_GPG13, set);
-	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(13), set);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
 }
 
 #undef LCD_UPPER_MARGIN
@@ -390,13 +391,13 @@ static struct ili9320_platdata jive_lcm_config = {
 
 static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
+	s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_lcd_spi = {
 	.bus_num	= 1,
-	.pin_clk	= S3C2410_GPG8,
-	.pin_mosi	= S3C2410_GPB8,
+	.pin_clk	= S3C2410_GPG(8),
+	.pin_mosi	= S3C2410_GPB(8),
 	.num_chipselect	= 1,
 	.chip_select	= jive_lcd_spi_chipselect,
 };
@@ -412,13 +413,13 @@ static struct platform_device jive_device_lcdspi = {
 
 static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
+	s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_wm8750_spi = {
 	.bus_num	= 2,
-	.pin_clk	= S3C2410_GPB4,
-	.pin_mosi	= S3C2410_GPB9,
+	.pin_clk	= S3C2410_GPB(4),
+	.pin_mosi	= S3C2410_GPB(9),
 	.num_chipselect	= 1,
 	.chip_select	= jive_wm8750_chipselect,
 };
@@ -479,7 +480,7 @@ static struct platform_device *jive_devices[] __initdata = {
 };
 
 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
-	.vbus_pin	= S3C2410_GPG1,		/* detect is on GPG1 */
+	.vbus_pin	= S3C2410_GPG(1),		/* detect is on GPG1 */
 };
 
 /* Jive power management device */
@@ -529,8 +530,8 @@ static void jive_power_off(void)
 {
 	printk(KERN_INFO "powering system down...\n");
 
-	s3c2410_gpio_setpin(S3C2410_GPC5, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
 }
 
 static void __init jive_machine_init(void)
@@ -634,22 +635,22 @@ static void __init jive_machine_init(void)
 
 	/* initialise the spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPG13, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPB7, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPB6, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPG8, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
 
 	/* initialise the WM8750 spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPH10, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index eba66aa6bd2..9a5e4341972 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -84,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 	switch (cmd)
 	{
 		case S3C2410_UDC_P_ENABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+			s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 			break;
 		case S3C2410_UDC_P_DISABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+			s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 			break;
 		case S3C2410_UDC_P_RESET :
 			break;
@@ -134,8 +135,8 @@ static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
 
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 			      S3C2410_MISCCR_USBSUSPND0 |
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index cde5ae9a434..5df73cbf2b4 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
 	select S3C24XX_GPIO_EXTRA64
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
@@ -43,6 +44,7 @@ config MACH_OSIRIS
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
@@ -58,12 +60,14 @@ config ARCH_S3C2440
 	bool "SMDK2440"
 	select CPU_S3C2440
 	select MACH_SMDK
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the SMDK2440.
 
 config MACH_NEXCODER_2440
  	bool "NexVision NEXCODER 2440 Light Board"
  	select CPU_S3C2440
+	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
@@ -76,6 +80,7 @@ config SMDK2440_CPU2440
 config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 69b6cf34df4..e08e081430f 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -17,14 +17,16 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
+#include <mach/map.h>
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 9c6abf9fb54..68f3870991b 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
@@ -468,7 +469,7 @@ static void __init anubis_map_io(void)
 		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
 	} else {
 		/* ensure that the GPIO is setup */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 315c42e3127..dfc7010935d 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -166,7 +166,7 @@ static struct platform_device at2440evb_device_eth = {
 };
 
 static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
-	.gpio_detect	= S3C2410_GPG10,
+	.gpio_detect	= S3C2410_GPG(10),
 };
 
 /* 7" LCD panel */
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 7aeaa972d7f..d43edede590 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/string.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -120,16 +121,16 @@ static struct platform_device *nexcoder_devices[] __initdata = {
 static void __init nexcoder_sensorboard_init(void)
 {
 	// Initialize SCCB bus
-	s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
+	s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
 
 	// Power up the sensor board
-	s3c2410_gpio_setpin(S3C2410_GPF1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
 }
 
 static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index c8a46685ce3..cba064b49a6 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
@@ -291,8 +292,8 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
@@ -304,7 +305,7 @@ static int osiris_pm_resume(struct sys_device *sd)
 
 	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 
 	return 0;
 }
@@ -384,7 +385,7 @@ static void __init osiris_map_io(void)
 		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
 	} else {
 		/* write-protect line to the NAND */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 
 	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 8430e582918..397f3b5c0b4 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -20,12 +20,13 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index 6da82b5c09b..f5af212066c 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -5,4 +5,27 @@
 #
 # Licensed under GPLv2
 
-# Currently nothing here, this will be added later
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+	bool
+	select CPU_S3C6400_INIT
+	select CPU_S3C6400_CLOCK
+	help
+	  Enable S3C6400 CPU support
+
+config S3C6400_SETUP_SDHCI
+	bool
+	help
+	  Internal configuration for default SDHCI
+	  setup for S3C6400.
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+	select CPU_S3C6400
+	select S3C_DEV_HSMMC
+	select S3C6400_SETUP_SDHCI
+	help
+	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
index 8f397db25b8..df1ce4aa03e 100644
--- a/arch/arm/mach-s3c6400/Makefile
+++ b/arch/arm/mach-s3c6400/Makefile
@@ -12,4 +12,12 @@ obj-				:=
 
 # Core support for S3C6400 system
 
-obj-n				+= blank.o
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+
+# setup support
+
+obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
index 9771ac2cb07..1067619f0ba 100644
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ b/arch/arm/mach-s3c6400/include/mach/dma.h
@@ -11,6 +11,63 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-/* currently nothing here, placeholder */
+#define S3C_DMA_CHANNELS	(16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+	/* DMA0/SDMA0 */
+	DMACH_UART0 = 0,
+	DMACH_UART0_SRC2,
+	DMACH_UART1,
+	DMACH_UART1_SRC2,
+	DMACH_UART2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,
+	DMACH_UART3_SRC2,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_OUT,
+	DMACH_I2S0_IN,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_HSI_I2SV40_TX,
+	DMACH_HSI_I2SV40_RX,
+
+	/* DMA1/SDMA1 */
+	DMACH_PCM1_TX = 16,
+	DMACH_PCM1_RX,
+	DMACH_I2S1_OUT,
+	DMACH_I2S1_IN,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
+	DMACH_AC97_PCMOUT,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_MICIN,
+	DMACH_PWM,
+	DMACH_IRDA,
+	DMACH_EXTERNAL,
+	DMACH_RES1,
+	DMACH_RES2,
+	DMACH_SECURITY_RX,	/* SDMA1 only */
+	DMACH_SECURITY_TX,	/* SDMA1 only */
+	DMACH_MAX		/* the end */
+};
+
+static __inline__ int s3c_dma_has_circular(void)
+{
+	/* we will be supporting ciruclar buffers as soon as we have DMA
+	 * engine support.
+	 */
+	return 1;
+}
+
+#define S3C2410_DMAF_CIRCULAR		(1 << 0)
+
+#include <plat/dma.h>
 
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 8199972ed5b..5057d9948d3 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -39,6 +39,8 @@
 #define S3C_VA_UART3		S3C_VA_UARTx(3)
 
 #define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_USB_HSOTG	(0x7C000000)
+#define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
 #define S3C64XX_PA_IIS0		(0x7F002000)
 #define S3C64XX_PA_IIS1		(0x7F003000)
@@ -57,6 +59,8 @@
 #define S3C64XX_PA_MODEM	(0x74108000)
 #define S3C64XX_VA_MODEM	S3C_ADDR(0x00600000)
 
+#define S3C64XX_PA_USBHOST	(0x74300000)
+
 /* place VICs close together */
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
@@ -69,5 +73,7 @@
 #define S3C_PA_IIC		S3C64XX_PA_IIC0
 #define S3C_PA_IIC1		S3C64XX_PA_IIC1
 #define S3C_PA_FB		S3C64XX_PA_FB
+#define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
new file mode 100644
index 00000000000..a6c7f4eb3a1
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - clock register compatibility with s3c24xx
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-clock.h>
+
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h
index 090cfd969bc..2e58cb7a714 100644
--- a/arch/arm/mach-s3c6400/include/mach/system.h
+++ b/arch/arm/mach-s3c6400/include/mach/system.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
+#include <plat/watchdog-reset.h>
+
 static void arch_idle(void)
 {
 	/* nothing here yet */
@@ -18,7 +20,11 @@ static void arch_idle(void)
 
 static void arch_reset(char mode, const char *cmd)
 {
-	/* nothing here yet */
+	if (mode != 's')
+		arch_wdt_reset();
+
+	/* if all else fails, or mode was for soft, jump to 0 */
+	cpu_reset(0);
 }
 
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c6400/mach-smdk6400.c
new file mode 100644
index 00000000000..ab19285389a
--- /dev/null
+++ b/arch/arm/mach-s3c6400/mach-smdk6400.c
@@ -0,0 +1,96 @@
+/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/s3c6400.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct map_desc smdk6400_iodesc[] = {};
+
+static void __init smdk6400_map_io(void)
+{
+	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+}
+
+static struct platform_device *smdk6400_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+static struct i2c_board_info i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("wm8753", 0x1A), },
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static void __init smdk6400_machine_init(void)
+{
+	i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
+	platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
+}
+
+MACHINE_START(SMDK6400, "SMDK6400")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6400_init_irq,
+	.map_io		= smdk6400_map_io,
+	.init_machine	= smdk6400_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
new file mode 100644
index 00000000000..1ece887d90b
--- /dev/null
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -0,0 +1,89 @@
+/* linux/arch/arm/mach-s3c6410/cpu.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s3c6400.h>
+
+void __init s3c6400_map_io(void)
+{
+	/* setup SDHCI */
+
+	s3c6400_default_sdhci0();
+	s3c6400_default_sdhci1();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+}
+
+void __init s3c6400_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c24xx_register_baseclocks(xtal);
+	s3c64xx_register_clocks();
+	s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
+	s3c6400_setup_clocks();
+}
+
+void __init s3c6400_init_irq(void)
+{
+	/* VIC0 does not have IRQS 5..7,
+	 * VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
+}
+
+struct sysdev_class s3c6400_sysclass = {
+	.name	= "s3c6400-core",
+};
+
+static struct sys_device s3c6400_sysdev = {
+	.cls	= &s3c6400_sysclass,
+};
+
+static int __init s3c6400_core_init(void)
+{
+	return sysdev_class_register(&s3c6400_sysclass);
+}
+
+core_initcall(s3c6400_core_init);
+
+int __init s3c6400_init(void)
+{
+	printk("S3C6400: Initialising architecture\n");
+
+	return sysdev_register(&s3c6400_sysdev);
+}
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
new file mode 100644
index 00000000000..b93dafbee1f
--- /dev/null
+++ b/arch/arm/mach-s3c6400/setup-sdhci.c
@@ -0,0 +1,63 @@
+/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6400_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	[2] = "mmc_bus",
+	/* [3] = "48m", - note not succesfully used yet */
+};
+
+void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 1d501007002..e63aac7f4e5 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -16,9 +16,18 @@ config CPU_S3C6410
 
 config S3C6410_SETUP_SDHCI
 	bool
+	select S3C64XX_SETUP_SDHCI_GPIO
 	help
 	  Internal helper functions for S3C6410 based SDHCI systems
 
+config MACH_ANW6410
+	bool "A&W6410"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the A&W6410
+
 config MACH_SMDK6410
 	bool "SMDK6410"
 	select CPU_S3C6410
@@ -26,6 +35,8 @@ config MACH_SMDK6410
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	select S3C_DEV_FB
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
 	select S3C6410_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_FB_24BPP
@@ -60,3 +71,29 @@ config SMDK6410_SD_CH1
 	  channels 0 and 1 are the same.
 
 endchoice
+
+config SMDK6410_WM1190_EV1
+	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM8350
+	select MFD_WM8350_I2C
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8350_CONFIG_MODE_3
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+	  and audio daughtercard for the Samsung SMDK6410 reference
+	  platform.  Enabling this option will build support for this
+	  module into the kernel.  The presence of the module will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1190-EV1 fitted.
+
+config MACH_NCP
+	bool "NCP"
+	select CPU_S3C6410
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_I2C1
+	help
+          Machine support for the Samsung NCP
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 2cd4f189036..6f9deac8861 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -20,4 +20,8 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 
 # machine support
 
+obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
+
+
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index 6a73ca6b7a3..ade904de889 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -31,6 +31,7 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -68,7 +69,7 @@ void __init s3c6410_init_clocks(int xtal)
 	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
 	s3c24xx_register_baseclocks(xtal);
 	s3c64xx_register_clocks();
-	s3c6400_register_clocks();
+	s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
 	s3c6400_setup_clocks();
 }
 
diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c6410/mach-anw6410.c
new file mode 100644
index 00000000000..661cca63de2
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-anw6410.c
@@ -0,0 +1,245 @@
+/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ * Copyright 2009 Kwangwoo Lee
+ * 	Kwangwoo Lee <kwangwoo.lee@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/dm9000.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-modem.h>
+
+/* DM9000 */
+#define ANW6410_PA_DM9000	(0x18000000)
+
+/* A hardware buffer to control external devices is mapped at 0x30000000.
+ * It can not be read. So current status must be kept in anw6410_extdev_status.
+ */
+#define ANW6410_VA_EXTDEV	S3C_ADDR(0x02000000)
+#define ANW6410_PA_EXTDEV	(0x30000000)
+
+#define ANW6410_EN_DM9000	(1<<11)
+#define ANW6410_EN_LCD		(1<<14)
+
+static __u32 anw6410_extdev_status;
+
+static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+/* framebuffer and LCD setup. */
+static void __init anw6410_lcd_mode_set(void)
+{
+	u32 tmp;
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/* GPF1 = LCD panel power
+ * GPF4 = LCD backlight control
+ */
+static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 1);
+		gpio_direction_output(S3C64XX_GPF(4), 1);
+	} else {
+		anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 0);
+		gpio_direction_output(S3C64XX_GPF(4), 0);
+	}
+}
+
+static struct plat_lcd_data anw6410_lcd_power_data = {
+	.set_power	= anw6410_lcd_power_set,
+};
+
+static struct platform_device anw6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &anw6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win anw6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &anw6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+static void __init anw6410_dm9000_enable(void)
+{
+	anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
+	__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+}
+
+static struct resource anw6410_dm9000_resource[] = {
+	[0] = {
+		.start = ANW6410_PA_DM9000,
+		.end   = ANW6410_PA_DM9000 + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = ANW6410_PA_DM9000 + 4,
+		.end   = ANW6410_PA_DM9000 + 4 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = IRQ_EINT(15),
+		.end   = IRQ_EINT(15),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+	},
+};
+
+static struct dm9000_plat_data anw6410_dm9000_pdata = {
+	.flags	  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+	/* dev_addr can be set to provide hwaddr. */
+};
+
+static struct platform_device anw6410_device_eth = {
+	.name	= "dm9000",
+	.id	= -1,
+	.num_resources	= ARRAY_SIZE(anw6410_dm9000_resource),
+	.resource	= anw6410_dm9000_resource,
+	.dev	= {
+		.platform_data  = &anw6410_dm9000_pdata,
+	},
+};
+
+static struct map_desc anw6410_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)ANW6410_VA_EXTDEV,
+		.pfn		= __phys_to_pfn(ANW6410_PA_EXTDEV),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct platform_device *anw6410_devices[] __initdata = {
+	&s3c_device_fb,
+	&anw6410_lcd_powerdev,
+	&anw6410_device_eth,
+};
+
+static void __init anw6410_map_io(void)
+{
+	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+
+	anw6410_lcd_mode_set();
+}
+
+static void __init anw6410_machine_init(void)
+{
+	s3c_fb_set_platdata(&anw6410_lcd_pdata);
+
+	gpio_request(S3C64XX_GPF(1), "panel power");
+	gpio_request(S3C64XX_GPF(4), "LCD backlight");
+
+	anw6410_dm9000_enable();
+
+	platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
+}
+
+MACHINE_START(ANW6410, "A&W6410")
+	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= anw6410_map_io,
+	.init_machine	= anw6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
new file mode 100644
index 00000000000..6030636f854
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -0,0 +1,107 @@
+/*
+ * linux/arch/arm/mach-s3c6410/mach-ncp.c
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+	/* REVISIT: NCP uses only serial 1, 2 */
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+struct map_desc ncp_iodesc[] = {};
+
+static void __init ncp_map_io(void)
+{
+	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+}
+
+static void __init ncp_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+
+	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+	/* Maintainer: Samsung Electronics */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= ncp_map_io,
+	.init_machine	= ncp_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 7f473e47e4f..bc9a7dea567 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -24,6 +24,12 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <linux/smsc911x.h>
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
 
 #include <video/platform_lcd.h>
 
@@ -39,8 +45,12 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/regs-modem.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-sys.h>
 #include <plat/iic.h>
 #include <plat/fb.h>
+#include <plat/gpio-cfg.h>
 
 #include <plat/s3c6410.h>
 #include <plat/clock.h>
@@ -129,6 +139,37 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };
 
+static struct resource smdk6410_smsc911x_resources[] = {
+	[0] = {
+		.start = 0x18000000,
+		.end   = 0x18000000 + SZ_64K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = S3C_EINT(10),
+		.end   = S3C_EINT(10),
+		.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
+	},
+};
+
+static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
+	.irq_polarity  = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type      = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags         = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device smdk6410_smsc911x = {
+	.name          = "smsc911x",
+	.id            = -1,
+	.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
+	.resource      = &smdk6410_smsc911x_resources[0],
+	.dev = {
+		.platform_data = &smdk6410_smsc911x_pdata,
+	},
+};
+
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
@@ -141,12 +182,155 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_fb,
+	&s3c_device_usb,
+	&s3c_device_usb_hsotg,
 	&smdk6410_lcd_powerdev,
+
+	&smdk6410_smsc911x,
+};
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data wm8350_dcdc1_data = {
+	.constraints = {
+		.name = "PVDD_INT/PVDD_PLL",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* Memory */
+static struct regulator_init_data wm8350_dcdc3_data = {
+	.constraints = {
+		.name = "PVDD_MEM",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.always_on = 1,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+	},
+};
+
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_init_data wm8350_dcdc4_data = {
+	.constraints = {
+		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+};
+
+/* ARM core */
+static struct regulator_consumer_supply dcdc6_consumers[] = {
+	{
+		.supply = "vddarm",
+	}
+};
+
+static struct regulator_init_data wm8350_dcdc6_data = {
+	.constraints = {
+		.name = "PVDD_ARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
+	.consumer_supplies = dcdc6_consumers,
 };
 
+/* Alive */
+static struct regulator_init_data wm8350_ldo1_data = {
+	.constraints = {
+		.name = "PVDD_ALIVE",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* OTG */
+static struct regulator_init_data wm8350_ldo2_data = {
+	.constraints = {
+		.name = "PVDD_OTG",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+		.always_on = 1,
+	},
+};
+
+/* LCD */
+static struct regulator_init_data wm8350_ldo3_data = {
+	.constraints = {
+		.name = "PVDD_LCD",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+};
+
+/* OTGi/1190-EV1 HPVDD & AVDD */
+static struct regulator_init_data wm8350_ldo4_data = {
+	.constraints = {
+		.name = "PVDD_OTGI/HPVDD/AVDD",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = 1,
+		.always_on = 1,
+	},
+};
+
+static struct {
+	int regulator;
+	struct regulator_init_data *initdata;
+} wm1190_regulators[] = {
+	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
+	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
+	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
+	{ WM8350_DCDC_6, &wm8350_dcdc6_data },
+	{ WM8350_LDO_1, &wm8350_ldo1_data },
+	{ WM8350_LDO_2, &wm8350_ldo2_data },
+	{ WM8350_LDO_3, &wm8350_ldo3_data },
+	{ WM8350_LDO_4, &wm8350_ldo4_data },
+};
+
+static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
+{
+	int i;
+
+	/* Instantiate the regulators */
+	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
+		wm8350_register_regulator(wm8350,
+					  wm1190_regulators[i].regulator,
+					  wm1190_regulators[i].initdata);
+
+	return 0;
+}
+
+static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
+	.init = smdk6410_wm8350_init,
+	.irq_high = 1,
+};
+#endif
+
 static struct i2c_board_info i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },
 	{ I2C_BOARD_INFO("wm8580", 0x1b), },
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+	{ I2C_BOARD_INFO("wm8350", 0x1a),
+	  .platform_data = &smdk6410_wm8350_pdata,
+	  .irq = S3C_EINT(12),
+	},
+#endif
 };
 
 static struct i2c_board_info i2c_devs1[] __initdata = {
@@ -155,9 +339,23 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 
 static void __init smdk6410_map_io(void)
 {
+	u32 tmp;
+
 	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+
+	/* set the LCD type */
+
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the lcd bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
 }
 
 static void __init smdk6410_machine_init(void)
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
index 0b5788bd598..20666f3bd47 100644
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -21,8 +21,6 @@
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 
-#include <mach/gpio.h>
-#include <plat/gpio-cfg.h>
 #include <plat/regs-sdhci.h>
 #include <plat/sdhci.h>
 
@@ -35,22 +33,6 @@ char *s3c6410_hsmmc_clksrcs[4] = {
 	/* [3] = "48m", - note not succesfully used yet */
 };
 
-void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPG(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
-}
 
 void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 				    void __iomem *r,
@@ -84,19 +66,3 @@ void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
 }
 
-void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPH(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
deleted file mode 100644
index 444f266ecc0..00000000000
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Based on spitz_pm.c and sharp code.
- *
- * Copyright (C) 2001  SHARP
- * Copyright 2005 Pavel Machek <pavel@suse.cz>
- *
- * Distribute under GPLv2.
- *
- * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished,
- * and sometimes charges them when it should not. If it makes angry lithium to come your way...
- * ...well, you have been warned.
- *
- * Actually, this should be quite safe, it seems sharp leaves charger enabled by default,
- * and my collie did not explode (yet).
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
-#include <mach/dma.h>
-#include <mach/collie.h>
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/sharpsl_pm.h>
-
-#include "../drivers/mfd/ucb1x00.h"
-
-static struct ucb1x00 *ucb;
-static int ad_revise;
-
-#define ADCtoPower(x)	       ((330 * x * 2) / 1024)
-
-static void collie_charger_init(void)
-{
-	int err;
-
-	if (sharpsl_param.adadj != -1)
-		ad_revise = sharpsl_param.adadj;
-
-	/* Register interrupt handler. */
-	if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED,
-			       "ACIN", sharpsl_ac_isr))) {
-		printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_AC_IN);
-		return;
-	}
-	if ((err = request_irq(COLLIE_IRQ_GPIO_CO, sharpsl_chrg_full_isr, IRQF_DISABLED,
-			       "CO", sharpsl_chrg_full_isr))) {
-		free_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr);
-		printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_CO);
-		return;
-	}
-
-	gpio_request(COLLIE_GPIO_CHARGE_ON, "charge on");
-	gpio_direction_output(COLLIE_GPIO_CHARGE_ON, 1);
-
-	ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON |
-			           COLLIE_TC35143_GPIO_BBAT_ON);
-	return;
-}
-
-static void collie_measure_temp(int on)
-{
-	if (on)
-		ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
-	else
-		ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
-}
-
-static void collie_charge(int on)
-{
-	/* Zaurus seems to contain LTC1731; it should know when to
-	 * stop charging itself, so setting charge on should be
-	 * relatively harmless (as long as it is not done too often).
-	 */
-	gpio_set_value(COLLIE_GPIO_CHARGE_ON, on);
-}
-
-static void collie_discharge(int on)
-{
-}
-
-static void collie_discharge1(int on)
-{
-}
-
-static void collie_presuspend(void)
-{
-}
-
-static void collie_postsuspend(void)
-{
-}
-
-static int collie_should_wakeup(unsigned int resume_on_alarm)
-{
-	return 0;
-}
-
-static unsigned long collie_charger_wakeup(void)
-{
-	return 0;
-}
-
-int collie_read_backup_battery(void)
-{
-	int voltage;
-
-	ucb1x00_adc_enable(ucb);
-
-	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0);
-	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
-
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
-	ucb1x00_adc_disable(ucb);
-
-	printk("Backup battery = %d(%d)\n", ADCtoPower(voltage), voltage);
-
-	return ADCtoPower(voltage);
-}
-
-int collie_read_main_battery(void)
-{
-	int voltage, voltage_rev, voltage_volts;
-
-	ucb1x00_adc_enable(ucb);
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
-	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0);
-
-	mdelay(1);
-	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
-
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON);
-	ucb1x00_adc_disable(ucb);
-
-	voltage_rev = voltage + ((ad_revise * voltage) / 652);
-	voltage_volts = ADCtoPower(voltage_rev);
-
-	printk("Main battery = %d(%d)\n", voltage_volts, voltage);
-
-	if (voltage != -1)
-		return voltage_volts;
-	else
-		return voltage;
-}
-
-int collie_read_temp(void)
-{
-	int voltage;
-
-	/* According to Sharp, temp must be > 973, main battery must be < 465,
-	   FIXME: sharpsl_pm.c has both conditions negated? FIXME: values
-	   are way out of range? */
-
-	ucb1x00_adc_enable(ucb);
-	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
-	/* >1010 = battery removed, 460 = 22C ?, higher = lower temp ? */
-	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC);
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
-	ucb1x00_adc_disable(ucb);
-
-	printk("Battery temp = %d\n", voltage);
-	return voltage;
-}
-
-static unsigned long read_devdata(int which)
-{
-	switch (which) {
-	case SHARPSL_BATT_VOLT:
-		return collie_read_main_battery();
-	case SHARPSL_BATT_TEMP:
-		return collie_read_temp();
-	case SHARPSL_ACIN_VOLT:
-		return 500;
-	case SHARPSL_STATUS_ACIN: {
-		int ret = GPLR & COLLIE_GPIO_AC_IN;
-		printk("AC status = %d\n", ret);
-		return ret;
-	}
-	case SHARPSL_STATUS_FATAL: {
-		int ret = GPLR & COLLIE_GPIO_MAIN_BAT_LOW;
-		printk("Fatal bat = %d\n", ret);
-		return ret;
-	}
-	default:
-		return ~0;
-	}
-}
-
-struct battery_thresh collie_battery_levels_acin[] = {
-	{ 420, 100},
-	{ 417,  95},
-	{ 415,  90},
-	{ 413,  80},
-	{ 411,  75},
-	{ 408,  70},
-	{ 406,  60},
-	{ 403,  50},
-	{ 398,  40},
-	{ 391,  25},
-	{  10,   5},
-	{   0,   0},
-};
-
-struct battery_thresh collie_battery_levels[] = {
-	{ 394, 100},
-	{ 390,  95},
-	{ 380,  90},
-	{ 370,  80},
-	{ 368,  75},	/* From sharp code: battery high with frontlight */
-	{ 366,  70},	/* 60..90 -- fake values invented by me for testing */
-	{ 364,  60},
-	{ 362,  50},
-	{ 360,  40},
-	{ 358,  25},	/* From sharp code: battery low with frontlight */
-	{ 356,   5},	/* From sharp code: battery verylow with frontlight */
-	{   0,   0},
-};
-
-struct sharpsl_charger_machinfo collie_pm_machinfo = {
-	.init             = collie_charger_init,
-	.read_devdata	  = read_devdata,
-	.discharge        = collie_discharge,
-	.discharge1       = collie_discharge1,
-	.charge           = collie_charge,
-	.measure_temp     = collie_measure_temp,
-	.presuspend       = collie_presuspend,
-	.postsuspend      = collie_postsuspend,
-	.charger_wakeup   = collie_charger_wakeup,
-	.should_wakeup    = collie_should_wakeup,
-	.bat_levels       = 12,
-	.bat_levels_noac  = collie_battery_levels,
-	.bat_levels_acin  = collie_battery_levels_acin,
-	.status_high_acin = 368,
-	.status_low_acin  = 358,
-	.status_high_noac = 368,
-	.status_low_noac  = 358,
-	.charge_on_volt	  = 350,	/* spitz uses 2.90V, but lets play it safe. */
-	.charge_on_temp   = 550,
-	.charge_acin_high = 550,	/* collie does not seem to have sensor for this, anyway */
-	.charge_acin_low  = 450,	/* ignored, too */
-	.fatal_acin_volt  = 356,
-	.fatal_noacin_volt = 356,
-
-	.batfull_irq = 1,		/* We do not want periodical charge restarts */
-};
-
-static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)
-{
-	sharpsl_pm.machinfo = &collie_pm_machinfo;
-	ucb = pdev->ucb;
-	return 0;
-}
-
-static struct ucb1x00_driver collie_pm_ucb_driver = {
-	.add	= collie_pm_ucb_add,
-};
-
-static struct platform_device *collie_pm_device;
-
-static int __init collie_pm_init(void)
-{
-	int ret;
-
-	collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
-	if (!collie_pm_device)
-		return -ENOMEM;
-
-	collie_pm_device->dev.platform_data = &collie_pm_machinfo;
-	ret = platform_device_add(collie_pm_device);
-
-	if (ret)
-		platform_device_put(collie_pm_device);
-
-	if (!ret)
-		ret = ucb1x00_register_driver(&collie_pm_ucb_driver);
-
-	return ret;
-}
-
-static void __exit collie_pm_exit(void)
-{
-	ucb1x00_unregister_driver(&collie_pm_ucb_driver);
-	platform_device_unregister(collie_pm_device);
-}
-
-module_init(collie_pm_init);
-module_exit(collie_pm_exit);
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 28cf3696797..506a5e5a9ad 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -54,7 +54,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse);
  * timeout after <timeout> rounds. Needs mcu running before its called.
  *
  * returns : %mcu output on success
- *	   : %-ETIMEOUT on timeout
+ *	   : %-ETIMEDOUT on timeout
  */
 int jornada_ssp_byte(u8 byte)
 {
@@ -82,7 +82,7 @@ EXPORT_SYMBOL(jornada_ssp_byte);
  * jornada_ssp_inout - decide if input is command or trading byte
  *
  * returns : (jornada_ssp_byte(byte)) on success
- *         : %-ETIMEOUT on timeout failure
+ *         : %-ETIMEDOUT on timeout failure
  */
 int jornada_ssp_inout(u8 byte)
 {
diff --git a/arch/arm/mach-stmp378x/Makefile b/arch/arm/mach-stmp378x/Makefile
new file mode 100644
index 00000000000..d156f76b379
--- /dev/null
+++ b/arch/arm/mach-stmp378x/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o
+obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o
diff --git a/arch/arm/mach-stmp378x/Makefile.boot b/arch/arm/mach-stmp378x/Makefile.boot
new file mode 100644
index 00000000000..1568ad404d5
--- /dev/null
+++ b/arch/arm/mach-stmp378x/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
+initrd_phys-y	:= 0x40800000
diff --git a/arch/arm/mach-stmp378x/include/mach/entry-macro.S b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
new file mode 100644
index 00000000000..731a92286da
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * Low-level IRQ helper macros for Freescale STMP378X
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	        mov	\base, #0xf0000000	@ vm address of IRQ controller
+		ldr	\irqnr, [\base, #0x70]	@ HW_ICOLL_STAT
+		cmp	\irqnr, #0x7f
+		moveqs	\irqnr, #0		@ Zero flag set for no IRQ
+
+		.endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
diff --git a/arch/arm/mach-stmp378x/include/mach/irqs.h b/arch/arm/mach-stmp378x/include/mach/irqs.h
new file mode 100644
index 00000000000..cc59673becd
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/irqs.h
@@ -0,0 +1,95 @@
+/*
+ * Freescale STMP378X interrupts
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#define IRQ_DEBUG_UART			0
+#define IRQ_COMMS_RX			1
+#define IRQ_COMMS_TX			1
+#define IRQ_SSP2_ERROR			2
+#define IRQ_VDD5V			3
+#define IRQ_HEADPHONE_SHORT		4
+#define IRQ_DAC_DMA			5
+#define IRQ_DAC_ERROR			6
+#define IRQ_ADC_DMA			7
+#define IRQ_ADC_ERROR			8
+#define IRQ_SPDIF_DMA			9
+#define IRQ_SAIF2_DMA			9
+#define IRQ_SPDIF_ERROR			10
+#define IRQ_SAIF1_IRQ			10
+#define IRQ_SAIF2_IRQ			10
+#define IRQ_USB_CTRL			11
+#define IRQ_USB_WAKEUP			12
+#define IRQ_GPMI_DMA			13
+#define IRQ_SSP1_DMA			14
+#define IRQ_SSP_ERROR			15
+#define IRQ_GPIO0			16
+#define IRQ_GPIO1			17
+#define IRQ_GPIO2			18
+#define IRQ_SAIF1_DMA			19
+#define IRQ_SSP2_DMA			20
+#define IRQ_ECC8_IRQ			21
+#define IRQ_RTC_ALARM			22
+#define IRQ_UARTAPP_TX_DMA		23
+#define IRQ_UARTAPP_INTERNAL		24
+#define IRQ_UARTAPP_RX_DMA		25
+#define IRQ_I2C_DMA			26
+#define IRQ_I2C_ERROR			27
+#define IRQ_TIMER0			28
+#define IRQ_TIMER1			29
+#define IRQ_TIMER2			30
+#define IRQ_TIMER3			31
+#define IRQ_BATT_BRNOUT			32
+#define IRQ_VDDD_BRNOUT			33
+#define IRQ_VDDIO_BRNOUT		34
+#define IRQ_VDD18_BRNOUT		35
+#define IRQ_TOUCH_DETECT		36
+#define IRQ_LRADC_CH0			37
+#define IRQ_LRADC_CH1			38
+#define IRQ_LRADC_CH2			39
+#define IRQ_LRADC_CH3			40
+#define IRQ_LRADC_CH4			41
+#define IRQ_LRADC_CH5			42
+#define IRQ_LRADC_CH6			43
+#define IRQ_LRADC_CH7			44
+#define IRQ_LCDIF_DMA			45
+#define IRQ_LCDIF_ERROR			46
+#define IRQ_DIGCTL_DEBUG_TRAP		47
+#define IRQ_RTC_1MSEC			48
+#define IRQ_DRI_DMA			49
+#define IRQ_DRI_ATTENTION		50
+#define IRQ_GPMI_ATTENTION		51
+#define IRQ_IR				52
+#define IRQ_DCP_VMI			53
+#define IRQ_DCP				54
+#define IRQ_BCH				56
+#define IRQ_PXP				57
+#define IRQ_UARTAPP2_TX_DMA		58
+#define IRQ_UARTAPP2_INTERNAL		59
+#define IRQ_UARTAPP2_RX_DMA		60
+#define IRQ_VDAC_DETECT			61
+#define IRQ_VDD5V_DROOP			64
+#define IRQ_DCDC4P2_BO			65
+
+
+#define NR_REAL_IRQS	128
+#define NR_IRQS		(NR_REAL_IRQS + 32 * 3)
+
+/* All interrupts are FIQ capable */
+#define FIQ_START		IRQ_DEBUG_UART
+
+/* Hard disk IRQ is a GPMI attention IRQ */
+#define IRQ_HARDDISK		IRQ_GPMI_ATTENTION
diff --git a/arch/arm/mach-stmp378x/include/mach/pins.h b/arch/arm/mach-stmp378x/include/mach/pins.h
new file mode 100644
index 00000000000..93f952d3596
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/pins.h
@@ -0,0 +1,151 @@
+/*
+ * Freescale STMP378X SoC pin multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_PINS_H
+#define __ASM_ARCH_PINS_H
+
+/*
+ * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware
+ * interface  this pin belongs to.
+ */
+
+/* Bank 0 */
+#define PINID_GPMI_D00		STMP3XXX_PINID(0, 0)
+#define PINID_GPMI_D01		STMP3XXX_PINID(0, 1)
+#define PINID_GPMI_D02		STMP3XXX_PINID(0, 2)
+#define PINID_GPMI_D03		STMP3XXX_PINID(0, 3)
+#define PINID_GPMI_D04		STMP3XXX_PINID(0, 4)
+#define PINID_GPMI_D05		STMP3XXX_PINID(0, 5)
+#define PINID_GPMI_D06		STMP3XXX_PINID(0, 6)
+#define PINID_GPMI_D07		STMP3XXX_PINID(0, 7)
+#define PINID_GPMI_D08		STMP3XXX_PINID(0, 8)
+#define PINID_GPMI_D09		STMP3XXX_PINID(0, 9)
+#define PINID_GPMI_D10		STMP3XXX_PINID(0, 10)
+#define PINID_GPMI_D11		STMP3XXX_PINID(0, 11)
+#define PINID_GPMI_D12		STMP3XXX_PINID(0, 12)
+#define PINID_GPMI_D13		STMP3XXX_PINID(0, 13)
+#define PINID_GPMI_D14		STMP3XXX_PINID(0, 14)
+#define PINID_GPMI_D15		STMP3XXX_PINID(0, 15)
+#define PINID_GPMI_CLE		STMP3XXX_PINID(0, 16)
+#define PINID_GPMI_ALE		STMP3XXX_PINID(0, 17)
+#define PINID_GMPI_CE2N		STMP3XXX_PINID(0, 18)
+#define PINID_GPMI_RDY0		STMP3XXX_PINID(0, 19)
+#define PINID_GPMI_RDY1		STMP3XXX_PINID(0, 20)
+#define PINID_GPMI_RDY2		STMP3XXX_PINID(0, 21)
+#define PINID_GPMI_RDY3		STMP3XXX_PINID(0, 22)
+#define PINID_GPMI_WPN		STMP3XXX_PINID(0, 23)
+#define PINID_GPMI_WRN		STMP3XXX_PINID(0, 24)
+#define PINID_GPMI_RDN		STMP3XXX_PINID(0, 25)
+#define PINID_AUART1_CTS	STMP3XXX_PINID(0, 26)
+#define PINID_AUART1_RTS	STMP3XXX_PINID(0, 27)
+#define PINID_AUART1_RX		STMP3XXX_PINID(0, 28)
+#define PINID_AUART1_TX		STMP3XXX_PINID(0, 29)
+#define PINID_I2C_SCL		STMP3XXX_PINID(0, 30)
+#define PINID_I2C_SDA		STMP3XXX_PINID(0, 31)
+
+/* Bank 1 */
+#define PINID_LCD_D00		STMP3XXX_PINID(1, 0)
+#define PINID_LCD_D01		STMP3XXX_PINID(1, 1)
+#define PINID_LCD_D02		STMP3XXX_PINID(1, 2)
+#define PINID_LCD_D03		STMP3XXX_PINID(1, 3)
+#define PINID_LCD_D04		STMP3XXX_PINID(1, 4)
+#define PINID_LCD_D05		STMP3XXX_PINID(1, 5)
+#define PINID_LCD_D06		STMP3XXX_PINID(1, 6)
+#define PINID_LCD_D07		STMP3XXX_PINID(1, 7)
+#define PINID_LCD_D08		STMP3XXX_PINID(1, 8)
+#define PINID_LCD_D09		STMP3XXX_PINID(1, 9)
+#define PINID_LCD_D10		STMP3XXX_PINID(1, 10)
+#define PINID_LCD_D11		STMP3XXX_PINID(1, 11)
+#define PINID_LCD_D12		STMP3XXX_PINID(1, 12)
+#define PINID_LCD_D13		STMP3XXX_PINID(1, 13)
+#define PINID_LCD_D14		STMP3XXX_PINID(1, 14)
+#define PINID_LCD_D15		STMP3XXX_PINID(1, 15)
+#define PINID_LCD_D16		STMP3XXX_PINID(1, 16)
+#define PINID_LCD_D17		STMP3XXX_PINID(1, 17)
+#define PINID_LCD_RESET		STMP3XXX_PINID(1, 18)
+#define PINID_LCD_RS		STMP3XXX_PINID(1, 19)
+#define PINID_LCD_WR		STMP3XXX_PINID(1, 20)
+#define PINID_LCD_CS		STMP3XXX_PINID(1, 21)
+#define PINID_LCD_DOTCK		STMP3XXX_PINID(1, 22)
+#define PINID_LCD_ENABLE	STMP3XXX_PINID(1, 23)
+#define PINID_LCD_HSYNC		STMP3XXX_PINID(1, 24)
+#define PINID_LCD_VSYNC		STMP3XXX_PINID(1, 25)
+#define PINID_PWM0		STMP3XXX_PINID(1, 26)
+#define PINID_PWM1		STMP3XXX_PINID(1, 27)
+#define PINID_PWM2		STMP3XXX_PINID(1, 28)
+#define PINID_PWM3		STMP3XXX_PINID(1, 29)
+#define PINID_PWM4		STMP3XXX_PINID(1, 30)
+
+/* Bank 2 */
+#define PINID_SSP1_CMD		STMP3XXX_PINID(2, 0)
+#define PINID_SSP1_DETECT	STMP3XXX_PINID(2, 1)
+#define PINID_SSP1_DATA0	STMP3XXX_PINID(2, 2)
+#define PINID_SSP1_DATA1	STMP3XXX_PINID(2, 3)
+#define PINID_SSP1_DATA2	STMP3XXX_PINID(2, 4)
+#define PINID_SSP1_DATA3	STMP3XXX_PINID(2, 5)
+#define PINID_SSP1_SCK		STMP3XXX_PINID(2, 6)
+#define PINID_ROTARYA		STMP3XXX_PINID(2, 7)
+#define PINID_ROTARYB		STMP3XXX_PINID(2, 8)
+#define PINID_EMI_A00		STMP3XXX_PINID(2, 9)
+#define PINID_EMI_A01		STMP3XXX_PINID(2, 10)
+#define PINID_EMI_A02		STMP3XXX_PINID(2, 11)
+#define PINID_EMI_A03		STMP3XXX_PINID(2, 12)
+#define PINID_EMI_A04		STMP3XXX_PINID(2, 13)
+#define PINID_EMI_A05		STMP3XXX_PINID(2, 14)
+#define PINID_EMI_A06		STMP3XXX_PINID(2, 15)
+#define PINID_EMI_A07		STMP3XXX_PINID(2, 16)
+#define PINID_EMI_A08		STMP3XXX_PINID(2, 17)
+#define PINID_EMI_A09		STMP3XXX_PINID(2, 18)
+#define PINID_EMI_A10		STMP3XXX_PINID(2, 19)
+#define PINID_EMI_A11		STMP3XXX_PINID(2, 20)
+#define PINID_EMI_A12		STMP3XXX_PINID(2, 21)
+#define PINID_EMI_BA0		STMP3XXX_PINID(2, 22)
+#define PINID_EMI_BA1		STMP3XXX_PINID(2, 23)
+#define PINID_EMI_CASN		STMP3XXX_PINID(2, 24)
+#define PINID_EMI_CE0N		STMP3XXX_PINID(2, 25)
+#define PINID_EMI_CE1N		STMP3XXX_PINID(2, 26)
+#define PINID_GPMI_CE1N		STMP3XXX_PINID(2, 27)
+#define PINID_GPMI_CE0N		STMP3XXX_PINID(2, 28)
+#define PINID_EMI_CKE		STMP3XXX_PINID(2, 29)
+#define PINID_EMI_RASN		STMP3XXX_PINID(2, 30)
+#define PINID_EMI_WEN		STMP3XXX_PINID(2, 31)
+
+/* Bank 3 */
+#define PINID_EMI_D00		STMP3XXX_PINID(3, 0)
+#define PINID_EMI_D01		STMP3XXX_PINID(3, 1)
+#define PINID_EMI_D02		STMP3XXX_PINID(3, 2)
+#define PINID_EMI_D03		STMP3XXX_PINID(3, 3)
+#define PINID_EMI_D04		STMP3XXX_PINID(3, 4)
+#define PINID_EMI_D05		STMP3XXX_PINID(3, 5)
+#define PINID_EMI_D06		STMP3XXX_PINID(3, 6)
+#define PINID_EMI_D07		STMP3XXX_PINID(3, 7)
+#define PINID_EMI_D08		STMP3XXX_PINID(3, 8)
+#define PINID_EMI_D09		STMP3XXX_PINID(3, 9)
+#define PINID_EMI_D10		STMP3XXX_PINID(3, 10)
+#define PINID_EMI_D11		STMP3XXX_PINID(3, 11)
+#define PINID_EMI_D12		STMP3XXX_PINID(3, 12)
+#define PINID_EMI_D13		STMP3XXX_PINID(3, 13)
+#define PINID_EMI_D14		STMP3XXX_PINID(3, 14)
+#define PINID_EMI_D15		STMP3XXX_PINID(3, 15)
+#define PINID_EMI_DQM0		STMP3XXX_PINID(3, 16)
+#define PINID_EMI_DQM1		STMP3XXX_PINID(3, 17)
+#define PINID_EMI_DQS0		STMP3XXX_PINID(3, 18)
+#define PINID_EMI_DQS1		STMP3XXX_PINID(3, 19)
+#define PINID_EMI_CLK		STMP3XXX_PINID(3, 20)
+#define PINID_EMI_CLKN		STMP3XXX_PINID(3, 21)
+
+#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
new file mode 100644
index 00000000000..dbcf85b6ac2
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
@@ -0,0 +1,101 @@
+/*
+ * stmp378x: APBH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBH
+#define _MACH_REGS_APBH
+
+#define REGS_APBH_BASE	(STMP3XXX_REGS_BASE + 0x4000)
+#define REGS_APBH_PHYS	0x80004000
+#define REGS_APBH_SIZE	0x2000
+
+#define HW_APBH_CTRL0		0x0
+#define BM_APBH_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBH_CTRL0_RESET_CHANNEL	16
+#define BM_APBH_CTRL0_CLKGATE	0x40000000
+#define BM_APBH_CTRL0_SFTRST	0x80000000
+
+#define HW_APBH_CTRL1		0x10
+#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0x00000001
+#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0
+
+#define HW_APBH_CTRL2		0x20
+
+#define HW_APBH_DEVSEL		0x30
+
+#define HW_APBH_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBH_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBH_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBH_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBH_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBH_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBH_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBH_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBH_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBH_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBH_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBH_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBH_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBH_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBH_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBH_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBH_CHn_NXTCMDAR	0x50
+
+#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER	 0
+#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE	 1
+#define BV_APBH_CHn_CMD_COMMAND__DMA_READ	 2
+#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE	 3
+#define BM_APBH_CHn_CMD_COMMAND	0x00000003
+#define BP_APBH_CHn_CMD_COMMAND	0
+#define BM_APBH_CHn_CMD_CHAIN	0x00000004
+#define BM_APBH_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBH_CHn_CMD_NANDLOCK	0x00000010
+#define BM_APBH_CHn_CMD_NANDWAIT4READY	0x00000020
+#define BM_APBH_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBH_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBH_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBH_CHn_CMD_CMDWORDS	12
+#define BM_APBH_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBH_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBH_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBH_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBH_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBH_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBH_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBH_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBH_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBH_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBH_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBH_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBH_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBH_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBH_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBH_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBH_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBH_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBH_CHn_SEMA	0x80
+#define BM_APBH_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBH_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBH_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBH_CHn_SEMA_PHORE	16
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
new file mode 100644
index 00000000000..3b934a4d27f
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
@@ -0,0 +1,119 @@
+/*
+ * stmp378x: APBX register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBX
+#define _MACH_REGS_APBX
+
+#define REGS_APBX_BASE	(STMP3XXX_REGS_BASE + 0x24000)
+#define REGS_APBX_PHYS	0x80024000
+#define REGS_APBX_SIZE	0x2000
+
+#define HW_APBX_CTRL0		0x0
+#define BM_APBX_CTRL0_CLKGATE	0x40000000
+#define BM_APBX_CTRL0_SFTRST	0x80000000
+
+#define HW_APBX_CTRL1		0x10
+
+#define HW_APBX_CTRL2		0x20
+
+#define HW_APBX_CHANNEL_CTRL	0x30
+#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL	0xFFFF0000
+#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL	16
+
+#define HW_APBX_DEVSEL		0x40
+
+#define HW_APBX_CH0_NXTCMDAR	(0x110 + 0 * 0x70)
+#define HW_APBX_CH1_NXTCMDAR	(0x110 + 1 * 0x70)
+#define HW_APBX_CH2_NXTCMDAR	(0x110 + 2 * 0x70)
+#define HW_APBX_CH3_NXTCMDAR	(0x110 + 3 * 0x70)
+#define HW_APBX_CH4_NXTCMDAR	(0x110 + 4 * 0x70)
+#define HW_APBX_CH5_NXTCMDAR	(0x110 + 5 * 0x70)
+#define HW_APBX_CH6_NXTCMDAR	(0x110 + 6 * 0x70)
+#define HW_APBX_CH7_NXTCMDAR	(0x110 + 7 * 0x70)
+#define HW_APBX_CH8_NXTCMDAR	(0x110 + 8 * 0x70)
+#define HW_APBX_CH9_NXTCMDAR	(0x110 + 9 * 0x70)
+#define HW_APBX_CH10_NXTCMDAR	(0x110 + 10 * 0x70)
+#define HW_APBX_CH11_NXTCMDAR	(0x110 + 11 * 0x70)
+#define HW_APBX_CH12_NXTCMDAR	(0x110 + 12 * 0x70)
+#define HW_APBX_CH13_NXTCMDAR	(0x110 + 13 * 0x70)
+#define HW_APBX_CH14_NXTCMDAR	(0x110 + 14 * 0x70)
+#define HW_APBX_CH15_NXTCMDAR	(0x110 + 15 * 0x70)
+
+#define HW_APBX_CHn_NXTCMDAR	0x110
+#define BM_APBX_CHn_CMD_COMMAND	0x00000003
+#define BP_APBX_CHn_CMD_COMMAND	0
+#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER	 0
+#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE	 1
+#define BV_APBX_CHn_CMD_COMMAND__DMA_READ	 2
+#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE	 3
+#define BM_APBX_CHn_CMD_CHAIN	0x00000004
+#define BM_APBX_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBX_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBX_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBX_CHn_CMD_HALTONTERMINATE	0x00000100
+#define BM_APBX_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBX_CHn_CMD_CMDWORDS	12
+#define BM_APBX_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBX_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBX_CH0_BAR		(0x130 + 0 * 0x70)
+#define HW_APBX_CH1_BAR		(0x130 + 1 * 0x70)
+#define HW_APBX_CH2_BAR		(0x130 + 2 * 0x70)
+#define HW_APBX_CH3_BAR		(0x130 + 3 * 0x70)
+#define HW_APBX_CH4_BAR		(0x130 + 4 * 0x70)
+#define HW_APBX_CH5_BAR		(0x130 + 5 * 0x70)
+#define HW_APBX_CH6_BAR		(0x130 + 6 * 0x70)
+#define HW_APBX_CH7_BAR		(0x130 + 7 * 0x70)
+#define HW_APBX_CH8_BAR		(0x130 + 8 * 0x70)
+#define HW_APBX_CH9_BAR		(0x130 + 9 * 0x70)
+#define HW_APBX_CH10_BAR		(0x130 + 10 * 0x70)
+#define HW_APBX_CH11_BAR		(0x130 + 11 * 0x70)
+#define HW_APBX_CH12_BAR		(0x130 + 12 * 0x70)
+#define HW_APBX_CH13_BAR		(0x130 + 13 * 0x70)
+#define HW_APBX_CH14_BAR		(0x130 + 14 * 0x70)
+#define HW_APBX_CH15_BAR		(0x130 + 15 * 0x70)
+
+#define HW_APBX_CHn_BAR		0x130
+
+#define HW_APBX_CH0_SEMA	(0x140 + 0 * 0x70)
+#define HW_APBX_CH1_SEMA	(0x140 + 1 * 0x70)
+#define HW_APBX_CH2_SEMA	(0x140 + 2 * 0x70)
+#define HW_APBX_CH3_SEMA	(0x140 + 3 * 0x70)
+#define HW_APBX_CH4_SEMA	(0x140 + 4 * 0x70)
+#define HW_APBX_CH5_SEMA	(0x140 + 5 * 0x70)
+#define HW_APBX_CH6_SEMA	(0x140 + 6 * 0x70)
+#define HW_APBX_CH7_SEMA	(0x140 + 7 * 0x70)
+#define HW_APBX_CH8_SEMA	(0x140 + 8 * 0x70)
+#define HW_APBX_CH9_SEMA	(0x140 + 9 * 0x70)
+#define HW_APBX_CH10_SEMA	(0x140 + 10 * 0x70)
+#define HW_APBX_CH11_SEMA	(0x140 + 11 * 0x70)
+#define HW_APBX_CH12_SEMA	(0x140 + 12 * 0x70)
+#define HW_APBX_CH13_SEMA	(0x140 + 13 * 0x70)
+#define HW_APBX_CH14_SEMA	(0x140 + 14 * 0x70)
+#define HW_APBX_CH15_SEMA	(0x140 + 15 * 0x70)
+
+#define HW_APBX_CHn_SEMA	0x140
+#define BM_APBX_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBX_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBX_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBX_CHn_SEMA_PHORE	16
+
+#endif
+
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
new file mode 100644
index 00000000000..641ac6126f8
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
@@ -0,0 +1,63 @@
+/*
+ * stmp378x: AUDIOIN register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOIN_BASE	(STMP3XXX_REGS_BASE + 0x4C000)
+#define REGS_AUDIOIN_PHYS	0x8004C000
+#define REGS_AUDIOIN_SIZE	0x2000
+
+#define HW_AUDIOIN_CTRL		0x0
+#define BM_AUDIOIN_CTRL_RUN	0x00000001
+#define BP_AUDIOIN_CTRL_RUN	0
+#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOIN_CTRL_WORD_LENGTH	0x00000020
+#define BM_AUDIOIN_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOIN_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOIN_STAT		0x10
+
+#define HW_AUDIOIN_ADCSRR	0x20
+
+#define HW_AUDIOIN_ADCVOLUME	0x30
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0x000000FF
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT	0x00FF0000
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT	16
+
+#define HW_AUDIOIN_ADCDEBUG	0x40
+
+#define HW_AUDIOIN_ADCVOL	0x50
+#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT	0x0000000F
+#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT	0
+#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT	0x00000030
+#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT	4
+#define BM_AUDIOIN_ADCVOL_GAIN_LEFT	0x00000F00
+#define BP_AUDIOIN_ADCVOL_GAIN_LEFT	8
+#define BM_AUDIOIN_ADCVOL_SELECT_LEFT	0x00003000
+#define BP_AUDIOIN_ADCVOL_SELECT_LEFT	12
+#define BM_AUDIOIN_ADCVOL_MUTE	0x01000000
+
+#define HW_AUDIOIN_MICLINE	0x60
+
+#define HW_AUDIOIN_ANACLKCTRL	0x70
+#define BM_AUDIOIN_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOIN_DATA		0x80
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
new file mode 100644
index 00000000000..f533e23694a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
@@ -0,0 +1,104 @@
+/*
+ * stmp378x: AUDIOOUT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOOUT_BASE	(STMP3XXX_REGS_BASE + 0x48000)
+#define REGS_AUDIOOUT_PHYS	0x80048000
+#define REGS_AUDIOOUT_SIZE	0x2000
+
+#define HW_AUDIOOUT_CTRL	0x0
+#define BM_AUDIOOUT_CTRL_RUN	0x00000001
+#define BP_AUDIOOUT_CTRL_RUN	0
+#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOOUT_CTRL_WORD_LENGTH	0x00000040
+#define BM_AUDIOOUT_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOOUT_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOOUT_STAT	0x10
+
+#define HW_AUDIOOUT_DACSRR	0x20
+#define BM_AUDIOOUT_DACSRR_SRC_FRAC	0x00001FFF
+#define BP_AUDIOOUT_DACSRR_SRC_FRAC	0
+#define BM_AUDIOOUT_DACSRR_SRC_INT	0x001F0000
+#define BP_AUDIOOUT_DACSRR_SRC_INT	16
+#define BM_AUDIOOUT_DACSRR_SRC_HOLD	0x07000000
+#define BP_AUDIOOUT_DACSRR_SRC_HOLD	24
+#define BM_AUDIOOUT_DACSRR_BASEMULT	0x70000000
+#define BP_AUDIOOUT_DACSRR_BASEMULT	28
+
+#define HW_AUDIOOUT_DACVOLUME	0x30
+#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT	0x00000100
+#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT	0x01000000
+#define BM_AUDIOOUT_DACVOLUME_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_DACDEBUG	0x40
+
+#define HW_AUDIOOUT_HPVOL	0x50
+#define BM_AUDIOOUT_HPVOL_MUTE	0x01000000
+#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD	0x02000000
+
+#define HW_AUDIOOUT_PWRDN	0x70
+#define BM_AUDIOOUT_PWRDN_HEADPHONE	0x00000001
+#define BP_AUDIOOUT_PWRDN_HEADPHONE	0
+#define BM_AUDIOOUT_PWRDN_CAPLESS	0x00000010
+#define BM_AUDIOOUT_PWRDN_ADC	0x00000100
+#define BM_AUDIOOUT_PWRDN_DAC	0x00001000
+#define BM_AUDIOOUT_PWRDN_RIGHT_ADC	0x00010000
+#define BM_AUDIOOUT_PWRDN_SPEAKER	0x01000000
+
+#define HW_AUDIOOUT_REFCTRL	0x80
+#define BM_AUDIOOUT_REFCTRL_VAG_VAL	0x000000F0
+#define BP_AUDIOOUT_REFCTRL_VAG_VAL	4
+#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL	0x00000F00
+#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL	8
+#define BM_AUDIOOUT_REFCTRL_ADJ_VAG	0x00001000
+#define BM_AUDIOOUT_REFCTRL_ADJ_ADC	0x00002000
+#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL	0x00030000
+#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL	16
+#define BM_AUDIOOUT_REFCTRL_LOW_PWR	0x00080000
+#define BM_AUDIOOUT_REFCTRL_VBG_ADJ	0x00700000
+#define BP_AUDIOOUT_REFCTRL_VBG_ADJ	20
+#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS	0x01000000
+#define BM_AUDIOOUT_REFCTRL_RAISE_REF	0x02000000
+
+#define HW_AUDIOOUT_ANACTRL	0x90
+#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB	0x00000010
+#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND	0x00000020
+
+#define HW_AUDIOOUT_TEST	0xA0
+#define BM_AUDIOOUT_TEST_HP_I1_ADJ	0x00C00000
+#define BP_AUDIOOUT_TEST_HP_I1_ADJ	22
+
+#define HW_AUDIOOUT_BISTCTRL	0xB0
+
+#define HW_AUDIOOUT_BISTSTAT0	0xC0
+
+#define HW_AUDIOOUT_BISTSTAT1	0xD0
+
+#define HW_AUDIOOUT_ANACLKCTRL	0xE0
+#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOOUT_DATA	0xF0
+
+#define HW_AUDIOOUT_SPEAKERCTRL	0x100
+#define BM_AUDIOOUT_SPEAKERCTRL_MUTE	0x01000000
+
+#define HW_AUDIOOUT_VERSION	0x200
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-bch.h b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
new file mode 100644
index 00000000000..532d2465071
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
@@ -0,0 +1,56 @@
+/*
+ * stmp378x: BCH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_BCH_BASE	(STMP3XXX_REGS_BASE + 0xA000)
+#define REGS_BCH_PHYS	0x8000A000
+#define REGS_BCH_SIZE	0x2000
+
+#define HW_BCH_CTRL		0x0
+#define BM_BCH_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_BCH_CTRL_COMPLETE_IRQ	0
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN	0x00000100
+
+#define HW_BCH_STATUS0		0x10
+#define BM_BCH_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_BCH_STATUS0_CORRECTED	0x00000008
+#define BM_BCH_STATUS0_STATUS_BLK0	0x0000FF00
+#define BP_BCH_STATUS0_STATUS_BLK0	8
+#define BM_BCH_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_BCH_STATUS0_COMPLETED_CE	16
+
+#define HW_BCH_LAYOUTSELECT	0x70
+
+#define HW_BCH_FLASH0LAYOUT0	0x80
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	0x00000FFF
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE	0
+#define BM_BCH_FLASH0LAYOUT0_ECC0	0x0000F000
+#define BP_BCH_FLASH0LAYOUT0_ECC0	12
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE	0x00FF0000
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE	16
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS	0xFF000000
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS	24
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	0x00000FFF
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE	0
+#define BM_BCH_FLASH0LAYOUT1_ECCN	0x0000F000
+#define BP_BCH_FLASH0LAYOUT1_ECCN	12
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE	0xFFFF0000
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE	16
+
+#define HW_BCH_BLOCKNAME	0x150
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
new file mode 100644
index 00000000000..7c546afd57a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
@@ -0,0 +1,88 @@
+/*
+ * stmp378x: CLKCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_CLKCTRL
+#define _MACH_REGS_CLKCTRL
+
+#define REGS_CLKCTRL_BASE	(STMP3XXX_REGS_BASE + 0x40000)
+#define REGS_CLKCTRL_PHYS	0x80040000
+#define REGS_CLKCTRL_SIZE	0x2000
+
+#define HW_CLKCTRL_PLLCTRL0	0x0
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
+
+#define HW_CLKCTRL_CPU		0x20
+#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
+#define BP_CLKCTRL_CPU_DIV_CPU	0
+
+#define HW_CLKCTRL_HBUS		0x30
+#define BM_CLKCTRL_HBUS_DIV	0x0000001F
+#define BP_CLKCTRL_HBUS_DIV	0
+#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
+
+#define HW_CLKCTRL_XBUS		0x40
+
+#define HW_CLKCTRL_XTAL		0x50
+#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE	0x10000000
+
+#define HW_CLKCTRL_PIX		0x60
+#define BM_CLKCTRL_PIX_DIV	0x00000FFF
+#define BP_CLKCTRL_PIX_DIV	0
+#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
+
+#define HW_CLKCTRL_SSP		0x70
+
+#define HW_CLKCTRL_GPMI		0x80
+
+#define HW_CLKCTRL_SPDIF	0x90
+
+#define HW_CLKCTRL_EMI		0xA0
+#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
+#define BP_CLKCTRL_EMI_DIV_EMI	0
+#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
+#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
+#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
+#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
+
+#define HW_CLKCTRL_IR		0xB0
+
+#define HW_CLKCTRL_SAIF		0xC0
+
+#define HW_CLKCTRL_TV		0xD0
+
+#define HW_CLKCTRL_ETM		0xE0
+
+#define HW_CLKCTRL_FRAC		0xF0
+#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
+#define BP_CLKCTRL_FRAC_EMIFRAC	8
+#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
+#define BP_CLKCTRL_FRAC_PIXFRAC	16
+#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
+
+#define HW_CLKCTRL_FRAC1	0x100
+
+#define HW_CLKCTRL_CLKSEQ	0x110
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
+
+#define HW_CLKCTRL_RESET	0x120
+#define BM_CLKCTRL_RESET_DIG	0x00000001
+#define BP_CLKCTRL_RESET_DIG	0
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
new file mode 100644
index 00000000000..fdedd00c0e2
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
@@ -0,0 +1,87 @@
+/*
+ * stmp378x: DCP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DCP_BASE	(STMP3XXX_REGS_BASE + 0x28000)
+#define REGS_DCP_PHYS	0x80028000
+#define REGS_DCP_SIZE	0x2000
+
+#define HW_DCP_CTRL		0x0
+#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE	0x000000FF
+#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE	0
+#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING	0x00400000
+#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES	0x00800000
+#define BM_DCP_CTRL_CLKGATE	0x40000000
+#define BM_DCP_CTRL_SFTRST	0x80000000
+
+#define HW_DCP_STAT		0x10
+#define BM_DCP_STAT_IRQ		0x0000000F
+#define BP_DCP_STAT_IRQ		0
+
+#define HW_DCP_CHANNELCTRL	0x20
+#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL	0x000000FF
+#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL	0
+
+#define HW_DCP_CONTEXT		0x50
+#define BM_DCP_PACKET1_INTERRUPT	0x00000001
+#define BP_DCP_PACKET1_INTERRUPT	0
+#define BM_DCP_PACKET1_DECR_SEMAPHORE	0x00000002
+#define BM_DCP_PACKET1_CHAIN	0x00000004
+#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS	0x00000008
+#define BM_DCP_PACKET1_ENABLE_CIPHER	0x00000020
+#define BM_DCP_PACKET1_ENABLE_HASH	0x00000040
+#define BM_DCP_PACKET1_CIPHER_ENCRYPT	0x00000100
+#define BM_DCP_PACKET1_CIPHER_INIT	0x00000200
+#define BM_DCP_PACKET1_OTP_KEY	0x00000400
+#define BM_DCP_PACKET1_PAYLOAD_KEY	0x00000800
+#define BM_DCP_PACKET1_HASH_INIT	0x00001000
+#define BM_DCP_PACKET1_HASH_TERM	0x00002000
+#define BM_DCP_PACKET2_CIPHER_SELECT	0x0000000F
+#define BP_DCP_PACKET2_CIPHER_SELECT	0
+#define BM_DCP_PACKET2_CIPHER_MODE	0x000000F0
+#define BP_DCP_PACKET2_CIPHER_MODE	4
+#define BM_DCP_PACKET2_KEY_SELECT	0x0000FF00
+#define BP_DCP_PACKET2_KEY_SELECT	8
+#define BM_DCP_PACKET2_HASH_SELECT	0x000F0000
+#define BP_DCP_PACKET2_HASH_SELECT	16
+#define BM_DCP_PACKET2_CIPHER_CFG	0xFF000000
+#define BP_DCP_PACKET2_CIPHER_CFG	24
+
+#define HW_DCP_CH0CMDPTR	(0x100 + 0 * 0x40)
+#define HW_DCP_CH1CMDPTR	(0x100 + 1 * 0x40)
+#define HW_DCP_CH2CMDPTR	(0x100 + 2 * 0x40)
+#define HW_DCP_CH3CMDPTR	(0x100 + 3 * 0x40)
+
+#define HW_DCP_CHnCMDPTR	0x100
+
+#define HW_DCP_CH0SEMA		(0x110 + 0 * 0x40)
+#define HW_DCP_CH1SEMA		(0x110 + 1 * 0x40)
+#define HW_DCP_CH2SEMA		(0x110 + 2 * 0x40)
+#define HW_DCP_CH3SEMA		(0x110 + 3 * 0x40)
+
+#define HW_DCP_CHnSEMA		0x110
+#define BM_DCP_CHnSEMA_INCREMENT	0x000000FF
+#define BP_DCP_CHnSEMA_INCREMENT	0
+
+#define HW_DCP_CH0STAT		(0x120 + 0 * 0x40)
+#define HW_DCP_CH1STAT		(0x120 + 1 * 0x40)
+#define HW_DCP_CH2STAT		(0x120 + 2 * 0x40)
+#define HW_DCP_CH3STAT		(0x120 + 3 * 0x40)
+
+#define HW_DCP_CHnSTAT		0x120
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
new file mode 100644
index 00000000000..5293005523b
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
@@ -0,0 +1,38 @@
+/*
+ * stmp378x: DIGCTL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DIGCTL_BASE	(STMP3XXX_REGS_BASE + 0x1C000)
+#define REGS_DIGCTL_PHYS	0x8001C000
+#define REGS_DIGCTL_SIZE	0x2000
+
+#define HW_DIGCTL_CTRL		0x0
+#define BM_DIGCTL_CTRL_USB_CLKGATE	0x00000004
+
+#define HW_DIGCTL_ARMCACHE	0x2B0
+#define BM_DIGCTL_ARMCACHE_ITAG_SS	0x00000003
+#define BP_DIGCTL_ARMCACHE_ITAG_SS	0
+#define BM_DIGCTL_ARMCACHE_DTAG_SS	0x00000030
+#define BP_DIGCTL_ARMCACHE_DTAG_SS	4
+#define BM_DIGCTL_ARMCACHE_CACHE_SS	0x00000300
+#define BP_DIGCTL_ARMCACHE_CACHE_SS	8
+#define BM_DIGCTL_ARMCACHE_DRTY_SS	0x00003000
+#define BP_DIGCTL_ARMCACHE_DRTY_SS	12
+#define BM_DIGCTL_ARMCACHE_VALID_SS	0x00030000
+#define BP_DIGCTL_ARMCACHE_VALID_SS	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dram.h b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
new file mode 100644
index 00000000000..02851431677
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
@@ -0,0 +1,27 @@
+/*
+ * stmp378x: DRAM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DRAM_BASE	(STMP3XXX_REGS_BASE + 0xE0000)
+#define REGS_DRAM_PHYS	0x800E0000
+#define REGS_DRAM_SIZE	0x2000
+
+#define HW_DRAM_CTL06		0x18
+
+#define HW_DRAM_CTL08		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dri.h b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
new file mode 100644
index 00000000000..da25f7e397e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
@@ -0,0 +1,45 @@
+/*
+ * stmp378x: DRI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DRI_BASE	(STMP3XXX_REGS_BASE + 0x74000)
+#define REGS_DRI_PHYS	0x80074000
+#define REGS_DRI_SIZE	0x2000
+
+#define HW_DRI_CTRL		0x0
+#define BM_DRI_CTRL_RUN		0x00000001
+#define BP_DRI_CTRL_RUN		0
+#define BM_DRI_CTRL_ATTENTION_IRQ	0x00000002
+#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ	0x00000004
+#define BM_DRI_CTRL_OVERFLOW_IRQ	0x00000008
+#define BM_DRI_CTRL_ATTENTION_IRQ_EN	0x00000200
+#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN	0x00000400
+#define BM_DRI_CTRL_OVERFLOW_IRQ_EN	0x00000800
+#define BM_DRI_CTRL_REACQUIRE_PHASE	0x00008000
+#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR	0x02000000
+#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR	0x04000000
+#define BM_DRI_CTRL_ENABLE_INPUTS	0x20000000
+#define BM_DRI_CTRL_CLKGATE	0x40000000
+#define BM_DRI_CTRL_SFTRST	0x80000000
+
+#define HW_DRI_TIMING		0x10
+#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL	0x000000FF
+#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL	0
+#define BM_DRI_TIMING_PILOT_REP_RATE	0x000F0000
+#define BP_DRI_TIMING_PILOT_REP_RATE	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
new file mode 100644
index 00000000000..cc353bec331
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
@@ -0,0 +1,39 @@
+/*
+ * stmp378x: ECC8 register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_ECC8_BASE	(STMP3XXX_REGS_BASE + 0x8000)
+#define REGS_ECC8_PHYS	0x80008000
+#define REGS_ECC8_SIZE	0x2000
+
+#define HW_ECC8_CTRL		0x0
+#define BM_ECC8_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_ECC8_CTRL_COMPLETE_IRQ	0
+#define BM_ECC8_CTRL_COMPLETE_IRQ_EN	0x00000100
+#define BM_ECC8_CTRL_AHBM_SFTRST	0x20000000
+
+#define HW_ECC8_STATUS0		0x10
+#define BM_ECC8_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_ECC8_STATUS0_CORRECTED	0x00000008
+#define BM_ECC8_STATUS0_STATUS_AUX	0x00000F00
+#define BP_ECC8_STATUS0_STATUS_AUX	8
+#define BM_ECC8_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_ECC8_STATUS0_COMPLETED_CE	16
+
+#define HW_ECC8_STATUS1		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-emi.h b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
new file mode 100644
index 00000000000..98773fc33d7
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
@@ -0,0 +1,25 @@
+/*
+ * stmp378x: EMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_EMI_BASE	(STMP3XXX_REGS_BASE + 0x20000)
+#define REGS_EMI_PHYS	0x80020000
+#define REGS_EMI_SIZE	0x2000
+
+#define HW_EMI_STAT		0x10
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
new file mode 100644
index 00000000000..2cc8bbe9168
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
@@ -0,0 +1,78 @@
+/*
+ * stmp378x: GPMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_GPMI_BASE	(STMP3XXX_REGS_BASE + 0xC000)
+#define REGS_GPMI_PHYS	0x8000C000
+#define REGS_GPMI_SIZE	0x2000
+
+#define HW_GPMI_CTRL0		0x0
+#define BM_GPMI_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_GPMI_CTRL0_XFER_COUNT	0
+#define BM_GPMI_CTRL0_CS	0x00300000
+#define BP_GPMI_CTRL0_CS	20
+#define BM_GPMI_CTRL0_LOCK_CS	0x00400000
+#define BM_GPMI_CTRL0_WORD_LENGTH	0x00800000
+#define BM_GPMI_CTRL0_ADDRESS      0x000E0000
+#define BP_GPMI_CTRL0_ADDRESS      17
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA  0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE   0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE   0x2
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT      0x00010000
+#define BM_GPMI_CTRL0_COMMAND_MODE	0x03000000
+#define BP_GPMI_CTRL0_COMMAND_MODE	24
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE	    0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ	     0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
+#define BM_GPMI_CTRL0_RUN	0x20000000
+#define BM_GPMI_CTRL0_CLKGATE	0x40000000
+#define BM_GPMI_CTRL0_SFTRST	0x80000000
+#define BM_GPMI_ECCCTRL_BUFFER_MASK	0x000001FF
+#define BP_GPMI_ECCCTRL_BUFFER_MASK	0
+#define BM_GPMI_ECCCTRL_ENABLE_ECC	0x00001000
+#define BM_GPMI_ECCCTRL_ECC_CMD	0x00006000
+#define BP_GPMI_ECCCTRL_ECC_CMD	13
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT			0
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT			1
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT			2
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT			3
+
+#define HW_GPMI_CTRL1		0x60
+#define BM_GPMI_CTRL1_GPMI_MODE	0x00000001
+#define BP_GPMI_CTRL1_GPMI_MODE	0
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY	0x00000004
+#define BM_GPMI_CTRL1_DEV_RESET	0x00000008
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ	0x00000200
+#define BM_GPMI_CTRL1_DEV_IRQ	0x00000400
+#define BM_GPMI_CTRL1_RDN_DELAY	0x0000F000
+#define BP_GPMI_CTRL1_RDN_DELAY	12
+#define BM_GPMI_CTRL1_BCH_MODE	0x00040000
+
+#define HW_GPMI_TIMING0		0x70
+#define BM_GPMI_TIMING0_DATA_SETUP	0x000000FF
+#define BP_GPMI_TIMING0_DATA_SETUP	0
+#define BM_GPMI_TIMING0_DATA_HOLD	0x0000FF00
+#define BP_GPMI_TIMING0_DATA_HOLD	8
+#define BM_GPMI_TIMING0_ADDRESS_SETUP	0x00FF0000
+#define BP_GPMI_TIMING0_ADDRESS_SETUP	16
+
+#define HW_GPMI_TIMING1		0x80
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	0xFFFF0000
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
new file mode 100644
index 00000000000..13a234c9943
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
@@ -0,0 +1,55 @@
+/*
+ * stmp378x: I2C register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_I2C_BASE	(STMP3XXX_REGS_BASE + 0x58000)
+#define REGS_I2C_PHYS	0x80058000
+#define REGS_I2C_SIZE	0x2000
+
+#define HW_I2C_CTRL0		0x0
+#define BM_I2C_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_I2C_CTRL0_XFER_COUNT	0
+#define BM_I2C_CTRL0_DIRECTION	0x00010000
+#define BM_I2C_CTRL0_MASTER_MODE	0x00020000
+#define BM_I2C_CTRL0_PRE_SEND_START	0x00080000
+#define BM_I2C_CTRL0_POST_SEND_STOP	0x00100000
+#define BM_I2C_CTRL0_RETAIN_CLOCK	0x00200000
+#define BM_I2C_CTRL0_SEND_NAK_ON_LAST	0x02000000
+#define BM_I2C_CTRL0_CLKGATE	0x40000000
+#define BM_I2C_CTRL0_SFTRST	0x80000000
+
+#define HW_I2C_TIMING0		0x10
+
+#define HW_I2C_TIMING1		0x20
+
+#define HW_I2C_TIMING2		0x30
+
+#define HW_I2C_CTRL1		0x40
+#define BM_I2C_CTRL1_SLAVE_IRQ	0x00000001
+#define BP_I2C_CTRL1_SLAVE_IRQ	0
+#define BM_I2C_CTRL1_SLAVE_STOP_IRQ	0x00000002
+#define BM_I2C_CTRL1_MASTER_LOSS_IRQ	0x00000004
+#define BM_I2C_CTRL1_EARLY_TERM_IRQ	0x00000008
+#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	0x00000010
+#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ	0x00000020
+#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ	0x00000040
+#define BM_I2C_CTRL1_BUS_FREE_IRQ	0x00000080
+#define BM_I2C_CTRL1_CLR_GOT_A_NAK	0x10000000
+
+#define HW_I2C_VERSION		0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
new file mode 100644
index 00000000000..f996e80f40e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
@@ -0,0 +1,45 @@
+/*
+ * stmp378x: ICOLL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_ICOLL
+#define _MACH_REGS_ICOLL
+
+#define REGS_ICOLL_BASE	(STMP3XXX_REGS_BASE + 0x0)
+#define REGS_ICOLL_PHYS	0x80000000
+#define REGS_ICOLL_SIZE	0x2000
+
+#define HW_ICOLL_VECTOR		0x0
+
+#define HW_ICOLL_LEVELACK	0x10
+#define BM_ICOLL_LEVELACK_IRQLEVELACK	0x0000000F
+#define BP_ICOLL_LEVELACK_IRQLEVELACK	0
+
+#define HW_ICOLL_CTRL		0x20
+#define BM_ICOLL_CTRL_CLKGATE	0x40000000
+#define BM_ICOLL_CTRL_SFTRST	0x80000000
+
+#define HW_ICOLL_STAT		0x70
+
+#define HW_ICOLL_INTERRUPTn	0x120
+
+#define HW_ICOLL_INTERRUPTn	0x120
+#define BM_ICOLL_INTERRUPTn_ENABLE	0x00000004
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
index a93df7cba69..a5b4ef10fab 100644
--- a/arch/arm/mach-imx/include/mach/memory.h
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
@@ -1,8 +1,8 @@
 /*
- *  arch/arm/mach-imx/include/mach/memory.h
+ * stmp378x: IR register definitions
  *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -16,11 +16,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET	UL(0x08000000)
-
-#endif
+#define REGS_IR_BASE	(STMP3XXX_REGS_BASE + 0x78000)
+#define REGS_IR_PHYS	0x80078000
+#define REGS_IR_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
new file mode 100644
index 00000000000..9cdbef4badc
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
@@ -0,0 +1,195 @@
+/*
+ * stmp378x: LCDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LCDIF_BASE	(STMP3XXX_REGS_BASE + 0x30000)
+#define REGS_LCDIF_PHYS	0x80030000
+#define REGS_LCDIF_SIZE	0x2000
+
+#define HW_LCDIF_CTRL		0x0
+#define BM_LCDIF_CTRL_RUN	0x00000001
+#define BP_LCDIF_CTRL_RUN	0
+#define BM_LCDIF_CTRL_LCDIF_MASTER	0x00000020
+#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC	0x00000080
+#define BM_LCDIF_CTRL_WORD_LENGTH	0x00000300
+#define BP_LCDIF_CTRL_WORD_LENGTH	8
+#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH	0x00000C00
+#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH	10
+#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE	0x0000C000
+#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE	14
+#define BM_LCDIF_CTRL_DATA_SELECT	0x00010000
+#define BM_LCDIF_CTRL_DOTCLK_MODE	0x00020000
+#define BM_LCDIF_CTRL_VSYNC_MODE	0x00040000
+#define BM_LCDIF_CTRL_BYPASS_COUNT	0x00080000
+#define BM_LCDIF_CTRL_DVI_MODE	0x00100000
+#define BM_LCDIF_CTRL_SHIFT_NUM_BITS	0x03E00000
+#define BP_LCDIF_CTRL_SHIFT_NUM_BITS	21
+#define BM_LCDIF_CTRL_DATA_SHIFT_DIR	0x04000000
+#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE	0x08000000
+#define BM_LCDIF_CTRL_CLKGATE	0x40000000
+#define BM_LCDIF_CTRL_SFTRST	0x80000000
+
+#define HW_LCDIF_CTRL1		0x10
+#define BM_LCDIF_CTRL1_RESET	0x00000001
+#define BP_LCDIF_CTRL1_RESET	0
+#define BM_LCDIF_CTRL1_MODE86	0x00000002
+#define BM_LCDIF_CTRL1_BUSY_ENABLE	0x00000004
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ	0x00000100
+#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ	0x00000200
+#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ	0x00000400
+#define BM_LCDIF_CTRL1_OVERFLOW_IRQ	0x00000800
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN	0x00001000
+#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT	0x000F0000
+#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT	16
+#define BM_LCDIF_CTRL1_INTERLACE_FIELDS	0x00800000
+#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW	0x01000000
+
+#define HW_LCDIF_TRANSFER_COUNT	0x20
+#define BM_LCDIF_TRANSFER_COUNT_H_COUNT	0x0000FFFF
+#define BP_LCDIF_TRANSFER_COUNT_H_COUNT	0
+#define BM_LCDIF_TRANSFER_COUNT_V_COUNT	0xFFFF0000
+#define BP_LCDIF_TRANSFER_COUNT_V_COUNT	16
+
+#define HW_LCDIF_CUR_BUF	0x30
+
+#define HW_LCDIF_NEXT_BUF	0x40
+
+#define HW_LCDIF_TIMING		0x60
+
+#define HW_LCDIF_VDCTRL0	0x70
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH	0x0003FFFF
+#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH	0
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	0x00100000
+#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT	0x00200000
+#define BM_LCDIF_VDCTRL0_ENABLE_POL	0x01000000
+#define BM_LCDIF_VDCTRL0_DOTCLK_POL	0x02000000
+#define BM_LCDIF_VDCTRL0_HSYNC_POL	0x04000000
+#define BM_LCDIF_VDCTRL0_VSYNC_POL	0x08000000
+#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT	0x10000000
+#define BM_LCDIF_VDCTRL0_VSYNC_OEB	0x20000000
+
+#define HW_LCDIF_VDCTRL1	0x80
+#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD	0xFFFFFFFF
+#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD	0
+
+#define HW_LCDIF_VDCTRL2	0x90
+#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD	0x0003FFFF
+#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD	0
+#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	0xFF000000
+#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	24
+
+#define HW_LCDIF_VDCTRL3	0xA0
+#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0x0000FFFF
+#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0
+#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	0x0FFF0000
+#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	16
+
+#define HW_LCDIF_VDCTRL4	0xB0
+#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT	0x0003FFFF
+#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON	0x00040000
+
+#define HW_LCDIF_DVICTRL0	0xC0
+#define BM_LCDIF_DVICTRL0_V_LINES_CNT	0x000003FF
+#define BP_LCDIF_DVICTRL0_V_LINES_CNT	0
+#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT	0x000FFC00
+#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT	10
+#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT	0x7FF00000
+#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT	20
+
+#define HW_LCDIF_DVICTRL1	0xD0
+#define BM_LCDIF_DVICTRL1_F2_START_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL1_F2_START_LINE	0
+#define BM_LCDIF_DVICTRL1_F1_END_LINE	0x000FFC00
+#define BP_LCDIF_DVICTRL1_F1_END_LINE	10
+#define BM_LCDIF_DVICTRL1_F1_START_LINE	0x3FF00000
+#define BP_LCDIF_DVICTRL1_F1_START_LINE	20
+
+#define HW_LCDIF_DVICTRL2	0xE0
+#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE	0
+#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE	0x000FFC00
+#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE	10
+#define BM_LCDIF_DVICTRL2_F2_END_LINE	0x3FF00000
+#define BP_LCDIF_DVICTRL2_F2_END_LINE	20
+
+#define HW_LCDIF_DVICTRL3	0xF0
+#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE	0
+#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE	0x03FF0000
+#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE	16
+
+#define HW_LCDIF_DVICTRL4	0x100
+#define BM_LCDIF_DVICTRL4_H_FILL_CNT	0x000000FF
+#define BP_LCDIF_DVICTRL4_H_FILL_CNT	0
+#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE	0x0000FF00
+#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE	8
+#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE	0x00FF0000
+#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE	16
+#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE	0xFF000000
+#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE	24
+
+#define HW_LCDIF_CSC_COEFF0	0x110
+#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER	0x00000003
+#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER	0
+#define BM_LCDIF_CSC_COEFF0_C0	0x03FF0000
+#define BP_LCDIF_CSC_COEFF0_C0	16
+
+#define HW_LCDIF_CSC_COEFF1	0x120
+#define BM_LCDIF_CSC_COEFF1_C1	0x000003FF
+#define BP_LCDIF_CSC_COEFF1_C1	0
+#define BM_LCDIF_CSC_COEFF1_C2	0x03FF0000
+#define BP_LCDIF_CSC_COEFF1_C2	16
+
+#define HW_LCDIF_CSC_COEFF2	0x130
+#define BM_LCDIF_CSC_COEFF2_C3	0x000003FF
+#define BP_LCDIF_CSC_COEFF2_C3	0
+#define BM_LCDIF_CSC_COEFF2_C4	0x03FF0000
+#define BP_LCDIF_CSC_COEFF2_C4	16
+
+#define HW_LCDIF_CSC_COEFF3	0x140
+#define BM_LCDIF_CSC_COEFF3_C5	0x000003FF
+#define BP_LCDIF_CSC_COEFF3_C5	0
+#define BM_LCDIF_CSC_COEFF3_C6	0x03FF0000
+#define BP_LCDIF_CSC_COEFF3_C6	16
+
+#define HW_LCDIF_CSC_COEFF4	0x150
+#define BM_LCDIF_CSC_COEFF4_C7	0x000003FF
+#define BP_LCDIF_CSC_COEFF4_C7	0
+#define BM_LCDIF_CSC_COEFF4_C8	0x03FF0000
+#define BP_LCDIF_CSC_COEFF4_C8	16
+
+#define HW_LCDIF_CSC_OFFSET	0x160
+#define BM_LCDIF_CSC_OFFSET_Y_OFFSET	0x000001FF
+#define BP_LCDIF_CSC_OFFSET_Y_OFFSET	0
+#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET	0x01FF0000
+#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET	16
+
+#define HW_LCDIF_CSC_LIMIT	0x170
+#define BM_LCDIF_CSC_LIMIT_Y_MAX	0x000000FF
+#define BP_LCDIF_CSC_LIMIT_Y_MAX	0
+#define BM_LCDIF_CSC_LIMIT_Y_MIN	0x0000FF00
+#define BP_LCDIF_CSC_LIMIT_Y_MIN	8
+#define BM_LCDIF_CSC_LIMIT_CBCR_MAX	0x00FF0000
+#define BP_LCDIF_CSC_LIMIT_CBCR_MAX	16
+#define BM_LCDIF_CSC_LIMIT_CBCR_MIN	0xFF000000
+#define BP_LCDIF_CSC_LIMIT_CBCR_MIN	24
+
+#define HW_LCDIF_STAT		0x1D0
+#define BM_LCDIF_STAT_TXFIFO_EMPTY	0x04000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
new file mode 100644
index 00000000000..cb8cb06f827
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
@@ -0,0 +1,99 @@
+/*
+ * stmp378x: LRADC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LRADC_BASE	(STMP3XXX_REGS_BASE + 0x50000)
+#define REGS_LRADC_PHYS	0x80050000
+#define REGS_LRADC_SIZE	0x2000
+
+#define HW_LRADC_CTRL0		0x0
+#define BM_LRADC_CTRL0_SCHEDULE	0x000000FF
+#define BP_LRADC_CTRL0_SCHEDULE	0
+#define BM_LRADC_CTRL0_XPLUS_ENABLE	0x00010000
+#define BM_LRADC_CTRL0_YPLUS_ENABLE	0x00020000
+#define BM_LRADC_CTRL0_XMINUS_ENABLE	0x00040000
+#define BM_LRADC_CTRL0_YMINUS_ENABLE	0x00080000
+#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE	0x00100000
+#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF	0x00200000
+#define BM_LRADC_CTRL0_CLKGATE	0x40000000
+#define BM_LRADC_CTRL0_SFTRST	0x80000000
+
+#define HW_LRADC_CTRL1		0x10
+#define BM_LRADC_CTRL1_LRADC0_IRQ	0x00000001
+#define BP_LRADC_CTRL1_LRADC0_IRQ	0
+#define BM_LRADC_CTRL1_LRADC5_IRQ	0x00000020
+#define BM_LRADC_CTRL1_LRADC6_IRQ	0x00000040
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ	0x00000100
+#define BM_LRADC_CTRL1_LRADC0_IRQ_EN	0x00010000
+#define BM_LRADC_CTRL1_LRADC5_IRQ_EN	0x00200000
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN	0x01000000
+
+#define HW_LRADC_CTRL2		0x20
+#define BM_LRADC_CTRL2_BL_BRIGHTNESS	0x001F0000
+#define BP_LRADC_CTRL2_BL_BRIGHTNESS	16
+#define BM_LRADC_CTRL2_BL_MUX_SELECT	0x00200000
+#define BM_LRADC_CTRL2_BL_ENABLE	0x00400000
+#define BM_LRADC_CTRL2_DIVIDE_BY_TWO	0xFF000000
+#define BP_LRADC_CTRL2_DIVIDE_BY_TWO	24
+
+#define HW_LRADC_CTRL3		0x30
+#define BM_LRADC_CTRL3_CYCLE_TIME	0x00000300
+#define BP_LRADC_CTRL3_CYCLE_TIME	8
+
+#define HW_LRADC_STATUS		0x40
+#define BM_LRADC_STATUS_TOUCH_DETECT_RAW	0x00000001
+#define BP_LRADC_STATUS_TOUCH_DETECT_RAW	0
+
+#define HW_LRADC_CH0		(0x50 + 0 * 0x10)
+#define HW_LRADC_CH1		(0x50 + 1 * 0x10)
+#define HW_LRADC_CH2		(0x50 + 2 * 0x10)
+#define HW_LRADC_CH3		(0x50 + 3 * 0x10)
+#define HW_LRADC_CH4		(0x50 + 4 * 0x10)
+#define HW_LRADC_CH5		(0x50 + 5 * 0x10)
+#define HW_LRADC_CH6		(0x50 + 6 * 0x10)
+#define HW_LRADC_CH7		(0x50 + 7 * 0x10)
+
+#define HW_LRADC_CHn		0x50
+#define BM_LRADC_CHn_VALUE	0x0003FFFF
+#define BP_LRADC_CHn_VALUE	0
+#define BM_LRADC_CHn_NUM_SAMPLES	0x1F000000
+#define BP_LRADC_CHn_NUM_SAMPLES	24
+#define BM_LRADC_CHn_ACCUMULATE	0x20000000
+
+#define HW_LRADC_DELAY0		(0xD0 + 0 * 0x10)
+#define HW_LRADC_DELAY1		(0xD0 + 1 * 0x10)
+#define HW_LRADC_DELAY2		(0xD0 + 2 * 0x10)
+#define HW_LRADC_DELAY3		(0xD0 + 3 * 0x10)
+
+#define HW_LRADC_DELAYn		0xD0
+#define BM_LRADC_DELAYn_DELAY	0x000007FF
+#define BP_LRADC_DELAYn_DELAY	0
+#define BM_LRADC_DELAYn_LOOP_COUNT	0x0000F800
+#define BP_LRADC_DELAYn_LOOP_COUNT	11
+#define BM_LRADC_DELAYn_TRIGGER_DELAYS	0x000F0000
+#define BP_LRADC_DELAYn_TRIGGER_DELAYS	16
+#define BM_LRADC_DELAYn_KICK	0x00100000
+#define BM_LRADC_DELAYn_TRIGGER_LRADCS	0xFF000000
+#define BP_LRADC_DELAYn_TRIGGER_LRADCS	24
+
+#define HW_LRADC_CTRL4		0x140
+#define BM_LRADC_CTRL4_LRADC6SELECT	0x0F000000
+#define BP_LRADC_CTRL4_LRADC6SELECT	24
+#define BM_LRADC_CTRL4_LRADC7SELECT	0xF0000000
+#define BP_LRADC_CTRL4_LRADC7SELECT	28
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
new file mode 100644
index 00000000000..f0af64d9937
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
@@ -0,0 +1,40 @@
+/*
+ * stmp378x: OCOTP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_OCOTP_BASE	(STMP3XXX_REGS_BASE + 0x2C000)
+#define REGS_OCOTP_PHYS	0x8002C000
+#define REGS_OCOTP_SIZE	0x2000
+
+#define HW_OCOTP_CTRL		0x0
+#define BM_OCOTP_CTRL_BUSY	0x00000100
+#define BM_OCOTP_CTRL_ERROR	0x00000200
+#define BM_OCOTP_CTRL_RD_BANK_OPEN	0x00001000
+#define BM_OCOTP_CTRL_RELOAD_SHADOWS	0x00002000
+#define BM_OCOTP_CTRL_WR_UNLOCK	0xFFFF0000
+#define BP_OCOTP_CTRL_WR_UNLOCK	16
+
+#define HW_OCOTP_DATA		0x10
+
+#define HW_OCOTP_CUST0		(0x20 + 0 * 0x10)
+#define HW_OCOTP_CUST1		(0x20 + 1 * 0x10)
+#define HW_OCOTP_CUST2		(0x20 + 2 * 0x10)
+#define HW_OCOTP_CUST3		(0x20 + 3 * 0x10)
+
+#define HW_OCOTP_CUSTn		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
new file mode 100644
index 00000000000..50d90ea1b13
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
@@ -0,0 +1,90 @@
+/*
+ * stmp378x: PINCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_PINCTRL
+#define _MACH_REGS_PINCTRL
+
+#define REGS_PINCTRL_BASE	(STMP3XXX_REGS_BASE + 0x18000)
+#define REGS_PINCTRL_PHYS	0x80018000
+#define REGS_PINCTRL_SIZE	0x2000
+
+#define HW_PINCTRL_MUXSEL0	0x100
+#define HW_PINCTRL_MUXSEL1	0x110
+#define HW_PINCTRL_MUXSEL2	0x120
+#define HW_PINCTRL_MUXSEL3	0x130
+#define HW_PINCTRL_MUXSEL4	0x140
+#define HW_PINCTRL_MUXSEL5	0x150
+#define HW_PINCTRL_MUXSEL6	0x160
+#define HW_PINCTRL_MUXSEL7	0x170
+
+#define HW_PINCTRL_DRIVE0	0x200
+#define HW_PINCTRL_DRIVE1	0x210
+#define HW_PINCTRL_DRIVE2	0x220
+#define HW_PINCTRL_DRIVE3	0x230
+#define HW_PINCTRL_DRIVE4	0x240
+#define HW_PINCTRL_DRIVE5	0x250
+#define HW_PINCTRL_DRIVE6	0x260
+#define HW_PINCTRL_DRIVE7	0x270
+#define HW_PINCTRL_DRIVE8	0x280
+#define HW_PINCTRL_DRIVE9	0x290
+#define HW_PINCTRL_DRIVE10	0x2A0
+#define HW_PINCTRL_DRIVE11	0x2B0
+#define HW_PINCTRL_DRIVE12	0x2C0
+#define HW_PINCTRL_DRIVE13	0x2D0
+#define HW_PINCTRL_DRIVE14	0x2E0
+
+#define HW_PINCTRL_PULL0	0x400
+#define HW_PINCTRL_PULL1	0x410
+#define HW_PINCTRL_PULL2	0x420
+#define HW_PINCTRL_PULL3	0x430
+
+#define HW_PINCTRL_DOUT0	0x500
+#define HW_PINCTRL_DOUT1	0x510
+#define HW_PINCTRL_DOUT2	0x520
+
+#define HW_PINCTRL_DIN0		0x600
+#define HW_PINCTRL_DIN1		0x610
+#define HW_PINCTRL_DIN2		0x620
+
+#define HW_PINCTRL_DOE0		0x700
+#define HW_PINCTRL_DOE1		0x710
+#define HW_PINCTRL_DOE2		0x720
+
+#define HW_PINCTRL_PIN2IRQ0	0x800
+#define HW_PINCTRL_PIN2IRQ1	0x810
+#define HW_PINCTRL_PIN2IRQ2	0x820
+
+#define HW_PINCTRL_IRQEN0	0x900
+#define HW_PINCTRL_IRQEN1	0x910
+#define HW_PINCTRL_IRQEN2	0x920
+
+#define HW_PINCTRL_IRQLEVEL0	0xA00
+#define HW_PINCTRL_IRQLEVEL1	0xA10
+#define HW_PINCTRL_IRQLEVEL2	0xA20
+
+#define HW_PINCTRL_IRQPOL0	0xB00
+#define HW_PINCTRL_IRQPOL1	0xB10
+#define HW_PINCTRL_IRQPOL2	0xB20
+
+#define HW_PINCTRL_IRQSTAT0	0xC00
+#define HW_PINCTRL_IRQSTAT1	0xC10
+#define HW_PINCTRL_IRQSTAT2	0xC20
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-power.h b/arch/arm/mach-stmp378x/include/mach/regs-power.h
new file mode 100644
index 00000000000..e454c830f07
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-power.h
@@ -0,0 +1,63 @@
+/*
+ * stmp378x: POWER register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_POWER
+#define _MACH_REGS_POWER
+
+#define REGS_POWER_BASE	(STMP3XXX_REGS_BASE + 0x44000)
+#define REGS_POWER_PHYS	0x80044000
+#define REGS_POWER_SIZE	0x2000
+
+#define HW_POWER_CTRL		0x0
+#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO	0x00000001
+#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO	0
+#define BM_POWER_CTRL_ENIRQ_PSWITCH	0x00020000
+#define BM_POWER_CTRL_PSWITCH_IRQ	0x00100000
+#define BM_POWER_CTRL_CLKGATE	0x40000000
+
+#define HW_POWER_5VCTRL		0x10
+#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT	0x00000040
+
+#define HW_POWER_MINPWR		0x20
+
+#define HW_POWER_CHARGE		0x30
+
+#define HW_POWER_VDDDCTRL	0x40
+
+#define HW_POWER_VDDACTRL	0x50
+
+#define HW_POWER_VDDIOCTRL	0x60
+#define BM_POWER_VDDIOCTRL_TRG	0x0000001F
+#define BP_POWER_VDDIOCTRL_TRG	0
+
+#define HW_POWER_STS		0xC0
+#define BM_POWER_STS_VBUSVALID	0x00000002
+#define BM_POWER_STS_BVALID	0x00000004
+#define BM_POWER_STS_AVALID	0x00000008
+#define BM_POWER_STS_DC_OK	0x00000200
+
+#define HW_POWER_RESET		0x100
+
+#define HW_POWER_DEBUG		0x110
+#define BM_POWER_DEBUG_BVALIDPIOLOCK	0x00000002
+#define BM_POWER_DEBUG_AVALIDPIOLOCK	0x00000004
+#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK	0x00000008
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
new file mode 100644
index 00000000000..0d0f9e56ec7
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
@@ -0,0 +1,53 @@
+/*
+ * stmp378x: PWM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PWM_BASE	(STMP3XXX_REGS_BASE + 0x64000)
+#define REGS_PWM_PHYS	0x80064000
+#define REGS_PWM_SIZE	0x2000
+
+#define HW_PWM_CTRL		0x0
+#define BM_PWM_CTRL_PWM2_ENABLE	0x00000004
+#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE	0x00000020
+
+#define HW_PWM_ACTIVE0		(0x10 + 0 * 0x20)
+#define HW_PWM_ACTIVE1		(0x10 + 1 * 0x20)
+#define HW_PWM_ACTIVE2		(0x10 + 2 * 0x20)
+#define HW_PWM_ACTIVE3		(0x10 + 3 * 0x20)
+
+#define HW_PWM_ACTIVEn		0x10
+#define BM_PWM_ACTIVEn_ACTIVE	0x0000FFFF
+#define BP_PWM_ACTIVEn_ACTIVE	0
+#define BM_PWM_ACTIVEn_INACTIVE	0xFFFF0000
+#define BP_PWM_ACTIVEn_INACTIVE	16
+
+#define HW_PWM_PERIOD0		(0x20 + 0 * 0x20)
+#define HW_PWM_PERIOD1		(0x20 + 1 * 0x20)
+#define HW_PWM_PERIOD2		(0x20 + 2 * 0x20)
+#define HW_PWM_PERIOD3		(0x20 + 3 * 0x20)
+
+#define HW_PWM_PERIODn		0x20
+#define BM_PWM_PERIODn_PERIOD	0x0000FFFF
+#define BP_PWM_PERIODn_PERIOD	0
+#define BM_PWM_PERIODn_ACTIVE_STATE	0x00030000
+#define BP_PWM_PERIODn_ACTIVE_STATE	16
+#define BM_PWM_PERIODn_INACTIVE_STATE	0x000C0000
+#define BP_PWM_PERIODn_INACTIVE_STATE	18
+#define BM_PWM_PERIODn_CDIV	0x00700000
+#define BP_PWM_PERIODn_CDIV	20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
new file mode 100644
index 00000000000..54d297896de
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
@@ -0,0 +1,140 @@
+/*
+ * stmp378x: PXP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PXP_BASE	(STMP3XXX_REGS_BASE + 0x2A000)
+#define REGS_PXP_PHYS	0x8002A000
+#define REGS_PXP_SIZE	0x2000
+
+#define HW_PXP_CTRL		0x0
+#define BM_PXP_CTRL_ENABLE	0x00000001
+#define BP_PXP_CTRL_ENABLE	0
+#define BM_PXP_CTRL_IRQ_ENABLE	0x00000002
+#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT	0x000000F0
+#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT	4
+#define BM_PXP_CTRL_ROTATE	0x00000300
+#define BP_PXP_CTRL_ROTATE	8
+#define BM_PXP_CTRL_HFLIP	0x00000400
+#define BM_PXP_CTRL_VFLIP	0x00000800
+#define BM_PXP_CTRL_S0_FORMAT	0x0000F000
+#define BP_PXP_CTRL_S0_FORMAT	12
+#define BM_PXP_CTRL_SCALE	0x00040000
+#define BM_PXP_CTRL_CROP	0x00080000
+
+#define HW_PXP_STAT		0x10
+#define BM_PXP_STAT_IRQ		0x00000001
+#define BP_PXP_STAT_IRQ		0
+
+#define HW_PXP_RGBBUF		0x20
+
+#define HW_PXP_RGBSIZE		0x40
+#define BM_PXP_RGBSIZE_HEIGHT	0x00000FFF
+#define BP_PXP_RGBSIZE_HEIGHT	0
+#define BM_PXP_RGBSIZE_WIDTH	0x00FFF000
+#define BP_PXP_RGBSIZE_WIDTH	12
+
+#define HW_PXP_S0BUF		0x50
+
+#define HW_PXP_S0UBUF		0x60
+
+#define HW_PXP_S0VBUF		0x70
+
+#define HW_PXP_S0PARAM		0x80
+#define BM_PXP_S0PARAM_HEIGHT	0x000000FF
+#define BP_PXP_S0PARAM_HEIGHT	0
+#define BM_PXP_S0PARAM_WIDTH	0x0000FF00
+#define BP_PXP_S0PARAM_WIDTH	8
+#define BM_PXP_S0PARAM_YBASE	0x00FF0000
+#define BP_PXP_S0PARAM_YBASE	16
+#define BM_PXP_S0PARAM_XBASE	0xFF000000
+#define BP_PXP_S0PARAM_XBASE	24
+
+#define HW_PXP_S0BACKGROUND	0x90
+
+#define HW_PXP_S0CROP		0xA0
+#define BM_PXP_S0CROP_HEIGHT	0x000000FF
+#define BP_PXP_S0CROP_HEIGHT	0
+#define BM_PXP_S0CROP_WIDTH	0x0000FF00
+#define BP_PXP_S0CROP_WIDTH	8
+#define BM_PXP_S0CROP_YBASE	0x00FF0000
+#define BP_PXP_S0CROP_YBASE	16
+#define BM_PXP_S0CROP_XBASE	0xFF000000
+#define BP_PXP_S0CROP_XBASE	24
+
+#define HW_PXP_S0SCALE		0xB0
+#define BM_PXP_S0SCALE_XSCALE	0x00003FFF
+#define BP_PXP_S0SCALE_XSCALE	0
+#define BM_PXP_S0SCALE_YSCALE	0x3FFF0000
+#define BP_PXP_S0SCALE_YSCALE	16
+
+#define HW_PXP_CSCCOEFF0	0xD0
+
+#define HW_PXP_CSCCOEFF1	0xE0
+
+#define HW_PXP_CSCCOEFF2	0xF0
+
+#define HW_PXP_S0COLORKEYLOW	0x180
+
+#define HW_PXP_S0COLORKEYHIGH	0x190
+
+#define HW_PXP_OL0		(0x200 + 0 * 0x40)
+#define HW_PXP_OL1		(0x200 + 1 * 0x40)
+#define HW_PXP_OL2		(0x200 + 2 * 0x40)
+#define HW_PXP_OL3		(0x200 + 3 * 0x40)
+#define HW_PXP_OL4		(0x200 + 4 * 0x40)
+#define HW_PXP_OL5		(0x200 + 5 * 0x40)
+#define HW_PXP_OL6		(0x200 + 6 * 0x40)
+#define HW_PXP_OL7		(0x200 + 7 * 0x40)
+
+#define HW_PXP_OLn		0x200
+
+#define HW_PXP_OL0SIZE		(0x210 + 0 * 0x40)
+#define HW_PXP_OL1SIZE		(0x210 + 1 * 0x40)
+#define HW_PXP_OL2SIZE		(0x210 + 2 * 0x40)
+#define HW_PXP_OL3SIZE		(0x210 + 3 * 0x40)
+#define HW_PXP_OL4SIZE		(0x210 + 4 * 0x40)
+#define HW_PXP_OL5SIZE		(0x210 + 5 * 0x40)
+#define HW_PXP_OL6SIZE		(0x210 + 6 * 0x40)
+#define HW_PXP_OL7SIZE		(0x210 + 7 * 0x40)
+
+#define HW_PXP_OLnSIZE		0x210
+#define BM_PXP_OLnSIZE_HEIGHT	0x000000FF
+#define BP_PXP_OLnSIZE_HEIGHT	0
+#define BM_PXP_OLnSIZE_WIDTH	0x0000FF00
+#define BP_PXP_OLnSIZE_WIDTH	8
+
+#define HW_PXP_OL0PARAM		(0x220 + 0 * 0x40)
+#define HW_PXP_OL1PARAM		(0x220 + 1 * 0x40)
+#define HW_PXP_OL2PARAM		(0x220 + 2 * 0x40)
+#define HW_PXP_OL3PARAM		(0x220 + 3 * 0x40)
+#define HW_PXP_OL4PARAM		(0x220 + 4 * 0x40)
+#define HW_PXP_OL5PARAM		(0x220 + 5 * 0x40)
+#define HW_PXP_OL6PARAM		(0x220 + 6 * 0x40)
+#define HW_PXP_OL7PARAM		(0x220 + 7 * 0x40)
+
+#define HW_PXP_OLnPARAM		0x220
+#define BM_PXP_OLnPARAM_ENABLE	0x00000001
+#define BP_PXP_OLnPARAM_ENABLE	0
+#define BM_PXP_OLnPARAM_ALPHA_CNTL	0x00000006
+#define BP_PXP_OLnPARAM_ALPHA_CNTL	1
+#define BM_PXP_OLnPARAM_ENABLE_COLORKEY	0x00000008
+#define BM_PXP_OLnPARAM_FORMAT	0x000000F0
+#define BP_PXP_OLnPARAM_FORMAT	4
+#define BM_PXP_OLnPARAM_ALPHA	0x0000FF00
+#define BP_PXP_OLnPARAM_ALPHA	8
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
new file mode 100644
index 00000000000..b8dbd6742d9
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
@@ -0,0 +1,59 @@
+/*
+ * stmp378x: RTC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_RTC_BASE	(STMP3XXX_REGS_BASE + 0x5C000)
+#define REGS_RTC_PHYS	0x8005C000
+#define REGS_RTC_SIZE	0x2000
+
+#define HW_RTC_CTRL		0x0
+#define BM_RTC_CTRL_ALARM_IRQ_EN	0x00000001
+#define BP_RTC_CTRL_ALARM_IRQ_EN	0
+#define BM_RTC_CTRL_ONEMSEC_IRQ_EN	0x00000002
+#define BM_RTC_CTRL_ALARM_IRQ	0x00000004
+#define BM_RTC_CTRL_ONEMSEC_IRQ	0x00000008
+#define BM_RTC_CTRL_WATCHDOGEN	0x00000010
+
+#define HW_RTC_STAT		0x10
+#define BM_RTC_STAT_NEW_REGS	0x0000FF00
+#define BP_RTC_STAT_NEW_REGS	8
+#define BM_RTC_STAT_STALE_REGS	0x00FF0000
+#define BP_RTC_STAT_STALE_REGS	16
+#define BM_RTC_STAT_RTC_PRESENT	0x80000000
+
+#define HW_RTC_SECONDS		0x30
+
+#define HW_RTC_ALARM		0x40
+
+#define HW_RTC_WATCHDOG		0x50
+
+#define HW_RTC_PERSISTENT0	0x60
+#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN	0x00000002
+#define BM_RTC_PERSISTENT0_ALARM_EN	0x00000004
+#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP	0x00000010
+#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP	0x00000020
+#define BM_RTC_PERSISTENT0_ALARM_WAKE	0x00000080
+#define BM_RTC_PERSISTENT0_SPARE_ANALOG	0xFFFC0000
+#define BP_RTC_PERSISTENT0_SPARE_ANALOG	18
+
+#define HW_RTC_PERSISTENT1	0x70
+#define BM_RTC_PERSISTENT1_GENERAL	0xFFFFFFFF
+#define BP_RTC_PERSISTENT1_GENERAL	0
+
+#define HW_RTC_VERSION		0xD0
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
index 7d7cb0bde3e..6df41762c2a 100644
--- a/arch/arm/mach-imx/include/mach/vmalloc.h
+++ b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
@@ -1,7 +1,8 @@
 /*
- *  arch/arm/mach-imx/include/mach/vmalloc.h
+ * stmp378x: SAIF register definitions
  *
- *  Copyright (C) 2000 Russell King.
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,6 +16,6 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define REGS_SAIF_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
new file mode 100644
index 00000000000..801539848c2
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
@@ -0,0 +1,49 @@
+/*
+ * stmp378x: SPDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SPDIF_BASE	(STMP3XXX_REGS_BASE + 0x54000)
+#define REGS_SPDIF_PHYS	0x80054000
+#define REGS_SPDIF_SIZE	0x2000
+
+#define HW_SPDIF_CTRL		0x0
+#define BM_SPDIF_CTRL_RUN	0x00000001
+#define BP_SPDIF_CTRL_RUN	0
+#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_SPDIF_CTRL_WORD_LENGTH	0x00000010
+#define BM_SPDIF_CTRL_CLKGATE	0x40000000
+#define BM_SPDIF_CTRL_SFTRST	0x80000000
+
+#define HW_SPDIF_STAT		0x10
+
+#define HW_SPDIF_FRAMECTRL	0x20
+
+#define HW_SPDIF_SRR		0x30
+#define BM_SPDIF_SRR_RATE	0x000FFFFF
+#define BP_SPDIF_SRR_RATE	0
+#define BM_SPDIF_SRR_BASEMULT	0x70000000
+#define BP_SPDIF_SRR_BASEMULT	28
+
+#define HW_SPDIF_DEBUG		0x40
+
+#define HW_SPDIF_DATA		0x50
+
+#define HW_SPDIF_VERSION	0x60
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
new file mode 100644
index 00000000000..28aacf0f58e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
@@ -0,0 +1,102 @@
+/*
+ * stmp378x: SSP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SSP1_BASE	(STMP3XXX_REGS_BASE + 0x10000)
+#define REGS_SSP1_PHYS	0x80010000
+#define REGS_SSP2_BASE	(STMP3XXX_REGS_BASE + 0x34000)
+#define REGS_SSP2_PHYS	0x80034000
+#define REGS_SSP_SIZE	0x2000
+
+#define HW_SSP_CTRL0		0x0
+#define BM_SSP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_SSP_CTRL0_XFER_COUNT	0
+#define BM_SSP_CTRL0_ENABLE	0x00010000
+#define BM_SSP_CTRL0_GET_RESP	0x00020000
+#define BM_SSP_CTRL0_LONG_RESP	0x00080000
+#define BM_SSP_CTRL0_WAIT_FOR_CMD	0x00100000
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ	0x00200000
+#define BM_SSP_CTRL0_BUS_WIDTH	0x00C00000
+#define BP_SSP_CTRL0_BUS_WIDTH	22
+#define BM_SSP_CTRL0_DATA_XFER	0x01000000
+#define BM_SSP_CTRL0_READ	0x02000000
+#define BM_SSP_CTRL0_IGNORE_CRC	0x04000000
+#define BM_SSP_CTRL0_LOCK_CS	0x08000000
+#define BM_SSP_CTRL0_RUN	0x20000000
+#define BM_SSP_CTRL0_CLKGATE	0x40000000
+#define BM_SSP_CTRL0_SFTRST	0x80000000
+
+#define HW_SSP_CMD0		0x10
+#define BM_SSP_CMD0_CMD		0x000000FF
+#define BP_SSP_CMD0_CMD		0
+#define BM_SSP_CMD0_BLOCK_COUNT	0x0000FF00
+#define BP_SSP_CMD0_BLOCK_COUNT	8
+#define BM_SSP_CMD0_BLOCK_SIZE	0x000F0000
+#define BP_SSP_CMD0_BLOCK_SIZE	16
+#define BM_SSP_CMD0_APPEND_8CYC	0x00100000
+#define BM_SSP_CMD1_CMD_ARG	0xFFFFFFFF
+#define BP_SSP_CMD1_CMD_ARG	0
+
+#define HW_SSP_TIMING		0x50
+#define BM_SSP_TIMING_CLOCK_RATE	0x000000FF
+#define BP_SSP_TIMING_CLOCK_RATE	0
+#define BM_SSP_TIMING_CLOCK_DIVIDE	0x0000FF00
+#define BP_SSP_TIMING_CLOCK_DIVIDE	8
+#define BM_SSP_TIMING_TIMEOUT	0xFFFF0000
+#define BP_SSP_TIMING_TIMEOUT	16
+
+#define HW_SSP_CTRL1		0x60
+#define BM_SSP_CTRL1_SSP_MODE	0x0000000F
+#define BP_SSP_CTRL1_SSP_MODE	0
+#define BM_SSP_CTRL1_WORD_LENGTH	0x000000F0
+#define BP_SSP_CTRL1_WORD_LENGTH	4
+#define BM_SSP_CTRL1_POLARITY	0x00000200
+#define BM_SSP_CTRL1_PHASE	0x00000400
+#define BM_SSP_CTRL1_DMA_ENABLE	0x00002000
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ	0x00008000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	0x00010000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ	0x00020000
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ	0x00200000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN	0x00400000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ	0x00800000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	0x01000000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ	0x02000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	0x04000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	0x08000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN	0x10000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ	0x20000000
+#define BM_SSP_CTRL1_SDIO_IRQ	0x80000000
+
+#define HW_SSP_DATA		0x70
+
+#define HW_SSP_SDRESP0		0x80
+
+#define HW_SSP_SDRESP1		0x90
+
+#define HW_SSP_SDRESP2		0xA0
+
+#define HW_SSP_SDRESP3		0xB0
+
+#define HW_SSP_STATUS		0xC0
+#define BM_SSP_STATUS_FIFO_EMPTY	0x00000020
+#define BM_SSP_STATUS_TIMEOUT	0x00001000
+#define BM_SSP_STATUS_RESP_TIMEOUT	0x00004000
+#define BM_SSP_STATUS_RESP_ERR	0x00008000
+#define BM_SSP_STATUS_RESP_CRC_ERR	0x00010000
+#define BM_SSP_STATUS_CARD_DETECT	0x10000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
new file mode 100644
index 00000000000..08343a8b556
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
@@ -0,0 +1,23 @@
+/*
+ * stmp378x: SYDMA register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SYDMA_BASE	(STMP3XXX_REGS_BASE + 0x26000)
+#define REGS_SYDMA_PHYS	0x80026000
+#define REGS_SYDMA_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
new file mode 100644
index 00000000000..b5527957c67
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
@@ -0,0 +1,68 @@
+/*
+ * stmp378x: TIMROT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_TIMROT
+#define _MACH_REGS_TIMROT
+
+#define REGS_TIMROT_BASE	(STMP3XXX_REGS_BASE + 0x68000)
+#define REGS_TIMROT_PHYS	0x80068000
+#define REGS_TIMROT_SIZE	0x2000
+
+#define HW_TIMROT_ROTCTRL	0x0
+#define BM_TIMROT_ROTCTRL_SELECT_A	0x00000007
+#define BP_TIMROT_ROTCTRL_SELECT_A	0
+#define BM_TIMROT_ROTCTRL_SELECT_B	0x00000070
+#define BP_TIMROT_ROTCTRL_SELECT_B	4
+#define BM_TIMROT_ROTCTRL_POLARITY_A	0x00000100
+#define BM_TIMROT_ROTCTRL_POLARITY_B	0x00000200
+#define BM_TIMROT_ROTCTRL_OVERSAMPLE	0x00000C00
+#define BP_TIMROT_ROTCTRL_OVERSAMPLE	10
+#define BM_TIMROT_ROTCTRL_RELATIVE	0x00001000
+#define BM_TIMROT_ROTCTRL_DIVIDER	0x003F0000
+#define BP_TIMROT_ROTCTRL_DIVIDER	16
+#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT	0x20000000
+#define BM_TIMROT_ROTCTRL_CLKGATE	0x40000000
+#define BM_TIMROT_ROTCTRL_SFTRST	0x80000000
+
+#define HW_TIMROT_ROTCOUNT	0x10
+#define BM_TIMROT_ROTCOUNT_UPDOWN	0x0000FFFF
+#define BP_TIMROT_ROTCOUNT_UPDOWN	0
+
+#define HW_TIMROT_TIMCTRL0	(0x20 + 0 * 0x20)
+#define HW_TIMROT_TIMCTRL1	(0x20 + 1 * 0x20)
+#define HW_TIMROT_TIMCTRL2	(0x20 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCTRLn	0x20
+#define BM_TIMROT_TIMCTRLn_SELECT	0x0000000F
+#define BP_TIMROT_TIMCTRLn_SELECT	0
+#define BM_TIMROT_TIMCTRLn_PRESCALE	0x00000030
+#define BP_TIMROT_TIMCTRLn_PRESCALE	4
+#define BM_TIMROT_TIMCTRLn_RELOAD	0x00000040
+#define BM_TIMROT_TIMCTRLn_UPDATE	0x00000080
+#define BM_TIMROT_TIMCTRLn_IRQ_EN	0x00004000
+#define BM_TIMROT_TIMCTRLn_IRQ	0x00008000
+
+#define HW_TIMROT_TIMCOUNT0	(0x30 + 0 * 0x20)
+#define HW_TIMROT_TIMCOUNT1	(0x30 + 1 * 0x20)
+#define HW_TIMROT_TIMCOUNT2	(0x30 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCOUNTn	0x30
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
new file mode 100644
index 00000000000..7f895cb3435
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
@@ -0,0 +1,67 @@
+/*
+ * stmp378x: TVENC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_TVENC_BASE	(STMP3XXX_REGS_BASE + 0x38000)
+#define REGS_TVENC_PHYS	0x80038000
+#define REGS_TVENC_SIZE	0x2000
+
+#define HW_TVENC_CTRL		0x0
+#define BM_TVENC_CTRL_CLKGATE	0x40000000
+#define BM_TVENC_CTRL_SFTRST	0x80000000
+
+#define HW_TVENC_CONFIG		0x10
+#define BM_TVENC_CONFIG_ENCD_MODE	0x00000007
+#define BP_TVENC_CONFIG_ENCD_MODE	0
+#define BM_TVENC_CONFIG_SYNC_MODE	0x00000070
+#define BP_TVENC_CONFIG_SYNC_MODE	4
+#define BM_TVENC_CONFIG_FSYNC_PHS	0x00000200
+#define BM_TVENC_CONFIG_CGAIN	0x0000C000
+#define BP_TVENC_CONFIG_CGAIN	14
+#define BM_TVENC_CONFIG_YGAIN_SEL	0x00030000
+#define BP_TVENC_CONFIG_YGAIN_SEL	16
+#define BM_TVENC_CONFIG_PAL_SHAPE	0x00100000
+
+#define HW_TVENC_SYNCOFFSET	0x30
+
+#define HW_TVENC_COLORSUB0	0xC0
+
+#define HW_TVENC_COLORBURST	0x140
+#define BM_TVENC_COLORBURST_PBA	0x00FF0000
+#define BP_TVENC_COLORBURST_PBA	16
+#define BM_TVENC_COLORBURST_NBA	0xFF000000
+#define BP_TVENC_COLORBURST_NBA	24
+
+#define HW_TVENC_MACROVISION0	0x150
+
+#define HW_TVENC_MACROVISION1	0x160
+
+#define HW_TVENC_MACROVISION2	0x170
+
+#define HW_TVENC_MACROVISION3	0x180
+
+#define HW_TVENC_MACROVISION4	0x190
+
+#define HW_TVENC_DACCTRL	0x1A0
+#define BM_TVENC_DACCTRL_RVAL	0x00000070
+#define BP_TVENC_DACCTRL_RVAL	4
+#define BM_TVENC_DACCTRL_DUMP_TOVDD1	0x00000100
+#define BM_TVENC_DACCTRL_PWRUP1	0x00001000
+#define BM_TVENC_DACCTRL_GAINUP	0x00040000
+#define BM_TVENC_DACCTRL_GAINDN	0x00080000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
new file mode 100644
index 00000000000..a251e68bb3a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
@@ -0,0 +1,87 @@
+/*
+ * stmp378x: UARTAPP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTAPP1_BASE	(STMP3XXX_REGS_BASE + 0x6C000)
+#define REGS_UARTAPP1_PHYS	0x8006C000
+#define REGS_UARTAPP2_BASE	(STMP3XXX_REGS_BASE + 0x6E000)
+#define REGS_UARTAPP2_PHYS	0x8006E000
+#define REGS_UARTAPP_SIZE	0x2000
+
+#define HW_UARTAPP_CTRL0	0x0
+#define BM_UARTAPP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL0_XFER_COUNT	0
+#define BM_UARTAPP_CTRL0_RXTIMEOUT	0x07FF0000
+#define BP_UARTAPP_CTRL0_RXTIMEOUT	16
+#define BM_UARTAPP_CTRL0_RXTO_ENABLE	0x08000000
+#define BM_UARTAPP_CTRL0_RUN	0x20000000
+#define BM_UARTAPP_CTRL0_SFTRST	0x80000000
+#define BM_UARTAPP_CTRL1_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL1_XFER_COUNT	0
+#define BM_UARTAPP_CTRL1_RUN	0x10000000
+
+#define HW_UARTAPP_CTRL2	0x20
+#define BM_UARTAPP_CTRL2_UARTEN	0x00000001
+#define BP_UARTAPP_CTRL2_UARTEN	0
+#define BM_UARTAPP_CTRL2_TXE	0x00000100
+#define BM_UARTAPP_CTRL2_RXE	0x00000200
+#define BM_UARTAPP_CTRL2_RTS	0x00000800
+#define BM_UARTAPP_CTRL2_RTSEN	0x00004000
+#define BM_UARTAPP_CTRL2_CTSEN	0x00008000
+#define BM_UARTAPP_CTRL2_RXDMAE	0x01000000
+#define BM_UARTAPP_CTRL2_TXDMAE	0x02000000
+#define BM_UARTAPP_CTRL2_DMAONERR	0x04000000
+
+#define HW_UARTAPP_LINECTRL	0x30
+#define BM_UARTAPP_LINECTRL_BRK	0x00000001
+#define BP_UARTAPP_LINECTRL_BRK	0
+#define BM_UARTAPP_LINECTRL_PEN	0x00000002
+#define BM_UARTAPP_LINECTRL_EPS	0x00000004
+#define BM_UARTAPP_LINECTRL_STP2	0x00000008
+#define BM_UARTAPP_LINECTRL_FEN	0x00000010
+#define BM_UARTAPP_LINECTRL_WLEN	0x00000060
+#define BP_UARTAPP_LINECTRL_WLEN	5
+#define BM_UARTAPP_LINECTRL_SPS	0x00000080
+#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC	0x00003F00
+#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC	8
+#define BM_UARTAPP_LINECTRL_BAUD_DIVINT	0xFFFF0000
+#define BP_UARTAPP_LINECTRL_BAUD_DIVINT	16
+
+#define HW_UARTAPP_INTR		0x50
+#define BM_UARTAPP_INTR_CTSMIS	0x00000002
+#define BM_UARTAPP_INTR_RTIS	0x00000040
+#define BM_UARTAPP_INTR_CTSMIEN	0x00020000
+#define BM_UARTAPP_INTR_RXIEN	0x00100000
+#define BM_UARTAPP_INTR_RTIEN	0x00400000
+
+#define HW_UARTAPP_DATA		0x60
+
+#define HW_UARTAPP_STAT		0x70
+#define BM_UARTAPP_STAT_RXCOUNT	0x0000FFFF
+#define BP_UARTAPP_STAT_RXCOUNT	0
+#define BM_UARTAPP_STAT_FERR	0x00010000
+#define BM_UARTAPP_STAT_PERR	0x00020000
+#define BM_UARTAPP_STAT_BERR	0x00040000
+#define BM_UARTAPP_STAT_OERR	0x00080000
+#define BM_UARTAPP_STAT_RXFE	0x01000000
+#define BM_UARTAPP_STAT_TXFF	0x02000000
+#define BM_UARTAPP_STAT_TXFE	0x08000000
+#define BM_UARTAPP_STAT_CTS	0x10000000
+
+#define HW_UARTAPP_VERSION	0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
new file mode 100644
index 00000000000..b810deb552a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
@@ -0,0 +1,268 @@
+/*
+ * stmp378x: UARTDBG register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTDBG_BASE	(STMP3XXX_REGS_BASE + 0x70000)
+#define REGS_UARTDBG_PHYS	0x80070000
+#define REGS_UARTDBG_SIZE	0x2000
+
+#define HW_UARTDBGDR 0x00000000
+#define BP_UARTDBGDR_UNAVAILABLE      16
+#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
+#define BP_UARTDBGDR_RESERVED      12
+#define BM_UARTDBGDR_RESERVED 0x0000F000
+#define BF_UARTDBGDR_RESERVED(v)  \
+	(((v) << 12) & BM_UARTDBGDR_RESERVED)
+#define BM_UARTDBGDR_OE 0x00000800
+#define BM_UARTDBGDR_BE 0x00000400
+#define BM_UARTDBGDR_PE 0x00000200
+#define BM_UARTDBGDR_FE 0x00000100
+#define BP_UARTDBGDR_DATA      0
+#define BM_UARTDBGDR_DATA 0x000000FF
+#define BF_UARTDBGDR_DATA(v)  \
+	(((v) << 0) & BM_UARTDBGDR_DATA)
+#define HW_UARTDBGRSR_ECR 0x00000004
+#define BP_UARTDBGRSR_ECR_UNAVAILABLE      8
+#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
+#define BP_UARTDBGRSR_ECR_EC      4
+#define BM_UARTDBGRSR_ECR_EC 0x000000F0
+#define BF_UARTDBGRSR_ECR_EC(v)  \
+	(((v) << 4) & BM_UARTDBGRSR_ECR_EC)
+#define BM_UARTDBGRSR_ECR_OE 0x00000008
+#define BM_UARTDBGRSR_ECR_BE 0x00000004
+#define BM_UARTDBGRSR_ECR_PE 0x00000002
+#define BM_UARTDBGRSR_ECR_FE 0x00000001
+#define HW_UARTDBGFR 0x00000018
+#define BP_UARTDBGFR_UNAVAILABLE      16
+#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGFR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
+#define BP_UARTDBGFR_RESERVED      9
+#define BM_UARTDBGFR_RESERVED 0x0000FE00
+#define BF_UARTDBGFR_RESERVED(v)  \
+	(((v) << 9) & BM_UARTDBGFR_RESERVED)
+#define BM_UARTDBGFR_RI 0x00000100
+#define BM_UARTDBGFR_TXFE 0x00000080
+#define BM_UARTDBGFR_RXFF 0x00000040
+#define BM_UARTDBGFR_TXFF 0x00000020
+#define BM_UARTDBGFR_RXFE 0x00000010
+#define BM_UARTDBGFR_BUSY 0x00000008
+#define BM_UARTDBGFR_DCD 0x00000004
+#define BM_UARTDBGFR_DSR 0x00000002
+#define BM_UARTDBGFR_CTS 0x00000001
+#define HW_UARTDBGILPR 0x00000020
+#define BP_UARTDBGILPR_UNAVAILABLE      8
+#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGILPR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
+#define BP_UARTDBGILPR_ILPDVSR      0
+#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
+#define BF_UARTDBGILPR_ILPDVSR(v)  \
+	(((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
+#define HW_UARTDBGIBRD 0x00000024
+#define BP_UARTDBGIBRD_UNAVAILABLE      16
+#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
+#define BP_UARTDBGIBRD_BAUD_DIVINT      0
+#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
+#define BF_UARTDBGIBRD_BAUD_DIVINT(v)  \
+	(((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
+#define HW_UARTDBGFBRD 0x00000028
+#define BP_UARTDBGFBRD_UNAVAILABLE      8
+#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
+#define BP_UARTDBGFBRD_RESERVED      6
+#define BM_UARTDBGFBRD_RESERVED 0x000000C0
+#define BF_UARTDBGFBRD_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGFBRD_RESERVED)
+#define BP_UARTDBGFBRD_BAUD_DIVFRAC      0
+#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
+#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v)  \
+	(((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
+#define HW_UARTDBGLCR_H 0x0000002c
+#define BP_UARTDBGLCR_H_UNAVAILABLE      16
+#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
+#define BP_UARTDBGLCR_H_RESERVED      8
+#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
+#define BF_UARTDBGLCR_H_RESERVED(v)  \
+	(((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
+#define BM_UARTDBGLCR_H_SPS 0x00000080
+#define BP_UARTDBGLCR_H_WLEN      5
+#define BM_UARTDBGLCR_H_WLEN 0x00000060
+#define BF_UARTDBGLCR_H_WLEN(v)  \
+	(((v) << 5) & BM_UARTDBGLCR_H_WLEN)
+#define BM_UARTDBGLCR_H_FEN 0x00000010
+#define BM_UARTDBGLCR_H_STP2 0x00000008
+#define BM_UARTDBGLCR_H_EPS 0x00000004
+#define BM_UARTDBGLCR_H_PEN 0x00000002
+#define BM_UARTDBGLCR_H_BRK 0x00000001
+#define HW_UARTDBGCR 0x00000030
+#define BP_UARTDBGCR_UNAVAILABLE      16
+#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGCR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
+#define BM_UARTDBGCR_CTSEN 0x00008000
+#define BM_UARTDBGCR_RTSEN 0x00004000
+#define BM_UARTDBGCR_OUT2 0x00002000
+#define BM_UARTDBGCR_OUT1 0x00001000
+#define BM_UARTDBGCR_RTS 0x00000800
+#define BM_UARTDBGCR_DTR 0x00000400
+#define BM_UARTDBGCR_RXE 0x00000200
+#define BM_UARTDBGCR_TXE 0x00000100
+#define BM_UARTDBGCR_LBE 0x00000080
+#define BP_UARTDBGCR_RESERVED      3
+#define BM_UARTDBGCR_RESERVED 0x00000078
+#define BF_UARTDBGCR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGCR_RESERVED)
+#define BM_UARTDBGCR_SIRLP 0x00000004
+#define BM_UARTDBGCR_SIREN 0x00000002
+#define BM_UARTDBGCR_UARTEN 0x00000001
+#define HW_UARTDBGIFLS 0x00000034
+#define BP_UARTDBGIFLS_UNAVAILABLE      16
+#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
+#define BP_UARTDBGIFLS_RESERVED      6
+#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
+#define BF_UARTDBGIFLS_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGIFLS_RESERVED)
+#define BP_UARTDBGIFLS_RXIFLSEL      3
+#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
+#define BF_UARTDBGIFLS_RXIFLSEL(v)  \
+	(((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
+#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY      0x0
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7       0x7
+#define BP_UARTDBGIFLS_TXIFLSEL      0
+#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
+#define BF_UARTDBGIFLS_TXIFLSEL(v)  \
+	(((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
+#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY	  0x0
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7       0x7
+#define HW_UARTDBGIMSC 0x00000038
+#define BP_UARTDBGIMSC_UNAVAILABLE      16
+#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
+#define BP_UARTDBGIMSC_RESERVED      11
+#define BM_UARTDBGIMSC_RESERVED 0x0000F800
+#define BF_UARTDBGIMSC_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGIMSC_RESERVED)
+#define BM_UARTDBGIMSC_OEIM 0x00000400
+#define BM_UARTDBGIMSC_BEIM 0x00000200
+#define BM_UARTDBGIMSC_PEIM 0x00000100
+#define BM_UARTDBGIMSC_FEIM 0x00000080
+#define BM_UARTDBGIMSC_RTIM 0x00000040
+#define BM_UARTDBGIMSC_TXIM 0x00000020
+#define BM_UARTDBGIMSC_RXIM 0x00000010
+#define BM_UARTDBGIMSC_DSRMIM 0x00000008
+#define BM_UARTDBGIMSC_DCDMIM 0x00000004
+#define BM_UARTDBGIMSC_CTSMIM 0x00000002
+#define BM_UARTDBGIMSC_RIMIM 0x00000001
+#define HW_UARTDBGRIS 0x0000003c
+#define BP_UARTDBGRIS_UNAVAILABLE      16
+#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGRIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
+#define BP_UARTDBGRIS_RESERVED      11
+#define BM_UARTDBGRIS_RESERVED 0x0000F800
+#define BF_UARTDBGRIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGRIS_RESERVED)
+#define BM_UARTDBGRIS_OERIS 0x00000400
+#define BM_UARTDBGRIS_BERIS 0x00000200
+#define BM_UARTDBGRIS_PERIS 0x00000100
+#define BM_UARTDBGRIS_FERIS 0x00000080
+#define BM_UARTDBGRIS_RTRIS 0x00000040
+#define BM_UARTDBGRIS_TXRIS 0x00000020
+#define BM_UARTDBGRIS_RXRIS 0x00000010
+#define BM_UARTDBGRIS_DSRRMIS 0x00000008
+#define BM_UARTDBGRIS_DCDRMIS 0x00000004
+#define BM_UARTDBGRIS_CTSRMIS 0x00000002
+#define BM_UARTDBGRIS_RIRMIS 0x00000001
+#define HW_UARTDBGMIS 0x00000040
+#define BP_UARTDBGMIS_UNAVAILABLE      16
+#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGMIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
+#define BP_UARTDBGMIS_RESERVED      11
+#define BM_UARTDBGMIS_RESERVED 0x0000F800
+#define BF_UARTDBGMIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGMIS_RESERVED)
+#define BM_UARTDBGMIS_OEMIS 0x00000400
+#define BM_UARTDBGMIS_BEMIS 0x00000200
+#define BM_UARTDBGMIS_PEMIS 0x00000100
+#define BM_UARTDBGMIS_FEMIS 0x00000080
+#define BM_UARTDBGMIS_RTMIS 0x00000040
+#define BM_UARTDBGMIS_TXMIS 0x00000020
+#define BM_UARTDBGMIS_RXMIS 0x00000010
+#define BM_UARTDBGMIS_DSRMMIS 0x00000008
+#define BM_UARTDBGMIS_DCDMMIS 0x00000004
+#define BM_UARTDBGMIS_CTSMMIS 0x00000002
+#define BM_UARTDBGMIS_RIMMIS 0x00000001
+#define HW_UARTDBGICR 0x00000044
+#define BP_UARTDBGICR_UNAVAILABLE      16
+#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGICR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
+#define BP_UARTDBGICR_RESERVED      11
+#define BM_UARTDBGICR_RESERVED 0x0000F800
+#define BF_UARTDBGICR_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGICR_RESERVED)
+#define BM_UARTDBGICR_OEIC 0x00000400
+#define BM_UARTDBGICR_BEIC 0x00000200
+#define BM_UARTDBGICR_PEIC 0x00000100
+#define BM_UARTDBGICR_FEIC 0x00000080
+#define BM_UARTDBGICR_RTIC 0x00000040
+#define BM_UARTDBGICR_TXIC 0x00000020
+#define BM_UARTDBGICR_RXIC 0x00000010
+#define BM_UARTDBGICR_DSRMIC 0x00000008
+#define BM_UARTDBGICR_DCDMIC 0x00000004
+#define BM_UARTDBGICR_CTSMIC 0x00000002
+#define BM_UARTDBGICR_RIMIC 0x00000001
+#define HW_UARTDBGDMACR 0x00000048
+#define BP_UARTDBGDMACR_UNAVAILABLE      16
+#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
+#define BP_UARTDBGDMACR_RESERVED      3
+#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
+#define BF_UARTDBGDMACR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGDMACR_RESERVED)
+#define BM_UARTDBGDMACR_DMAONERR 0x00000004
+#define BM_UARTDBGDMACR_TXDMAE 0x00000002
+#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
new file mode 100644
index 00000000000..25112c1aa60
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
@@ -0,0 +1,40 @@
+/*
+ * stmp378x: USBCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBCTRL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTRL_PHYS	0x80080000
+#define REGS_USBCTRL_SIZE	0x2000
+
+#define HW_USBCTRL_USBCMD	0x140
+#define BM_USBCTRL_USBCMD_RS	0x00000001
+#define BP_USBCTRL_USBCMD_RS	0
+#define BM_USBCTRL_USBCMD_RST	0x00000002
+
+#define HW_USBCTRL_USBINTR	0x148
+#define BM_USBCTRL_USBINTR_UE	0x00000001
+#define BP_USBCTRL_USBINTR_UE	0
+
+#define HW_USBCTRL_PORTSC1	0x184
+#define BM_USBCTRL_PORTSC1_PHCD	0x00800000
+
+#define HW_USBCTRL_OTGSC	0x1A4
+#define BM_USBCTRL_OTGSC_ID	0x00000100
+#define BM_USBCTRL_OTGSC_IDIS	0x00010000
+#define BM_USBCTRL_OTGSC_IDIE	0x01000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
new file mode 100644
index 00000000000..11f3b732dc9
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
@@ -0,0 +1,37 @@
+/*
+ * stmp378x: USBPHY register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBPHY_BASE	(STMP3XXX_REGS_BASE + 0x7C000)
+#define REGS_USBPHY_PHYS	0x8007C000
+#define REGS_USBPHY_SIZE	0x2000
+
+#define HW_USBPHY_PWD		0x0
+
+#define HW_USBPHY_CTRL		0x30
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	0x00000002
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT	0x00000010
+#define BM_USBPHY_CTRL_ENOTGIDDETECT	0x00000080
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN	0x00000800
+#define BM_USBPHY_CTRL_CLKGATE	0x40000000
+#define BM_USBPHY_CTRL_SFTRST	0x80000000
+
+#define HW_USBPHY_STATUS	0x40
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS	0x00000040
+#define BM_USBPHY_STATUS_OTGID_STATUS	0x00000100
diff --git a/arch/arm/mach-stmp378x/stmp378x.c b/arch/arm/mach-stmp378x/stmp378x.c
new file mode 100644
index 00000000000..ddd49a760fd
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x.c
@@ -0,0 +1,299 @@
+/*
+ * Freescale STMP378X platform support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/dma.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/system.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/regs-icoll.h>
+#include <mach/regs-apbh.h>
+#include <mach/regs-apbx.h>
+#include <mach/regs-pxp.h>
+#include <mach/regs-i2c.h>
+
+#include "stmp378x.h"
+/*
+ * IRQ handling
+ */
+static void stmp378x_ack_irq(unsigned int irq)
+{
+	/* Tell ICOLL to release IRQ line */
+	__raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
+
+	/* ACK current interrupt */
+	__raw_writel(0x01 /* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 */,
+			REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+
+	/* Barrier */
+	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
+static void stmp378x_mask_irq(unsigned int irq)
+{
+	/* IRQ disable */
+	stmp3xxx_clearl(BM_ICOLL_INTERRUPTn_ENABLE,
+			REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10);
+}
+
+static void stmp378x_unmask_irq(unsigned int irq)
+{
+	/* IRQ enable */
+	stmp3xxx_setl(BM_ICOLL_INTERRUPTn_ENABLE,
+		      REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10);
+}
+
+static struct irq_chip stmp378x_chip = {
+	.ack	= stmp378x_ack_irq,
+	.mask	= stmp378x_mask_irq,
+	.unmask = stmp378x_unmask_irq,
+};
+
+void __init stmp378x_init_irq(void)
+{
+	stmp3xxx_init_irq(&stmp378x_chip);
+}
+
+/*
+ * DMA interrupt handling
+ */
+void stmp3xxx_arch_dma_enable_interrupt(int channel)
+{
+	void __iomem *c1, *c2;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
+		c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
+		c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
+		break;
+
+	default:
+		return;
+	}
+	stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c1);
+	stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c2);
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
+
+void stmp3xxx_arch_dma_clear_interrupt(int channel)
+{
+	void __iomem *c1, *c2;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
+		c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
+		c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
+		break;
+
+	default:
+		return;
+	}
+	stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c1);
+	stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c2);
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
+
+int stmp3xxx_arch_dma_is_interrupt(int channel)
+{
+	int r = 0;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		r = __raw_readl(REGS_APBX_BASE + HW_APBX_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+	}
+	return r;
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
+
+void stmp3xxx_arch_dma_reset_channel(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+	void __iomem *c0;
+	u32 mask;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c0 = REGS_APBH_BASE + HW_APBH_CTRL0;
+		mask = chbit << BP_APBH_CTRL0_RESET_CHANNEL;
+		break;
+	case STMP3XXX_BUS_APBX:
+		c0 = REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL;
+		mask = chbit << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL;
+		break;
+	default:
+		return;
+	}
+
+	/* Reset channel and wait for it to complete */
+	stmp3xxx_setl(mask, c0);
+	while (__raw_readl(c0) & mask)
+		cpu_relax();
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
+
+void stmp3xxx_arch_dma_freeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+	u32 mask = 1 << chbit;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_setl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
+
+void stmp3xxx_arch_dma_unfreeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+	u32 mask = 1 << chbit;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_clearl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_clearl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
+
+/*
+ * The registers are all very closely mapped, so we might as well map them all
+ * with a single mapping
+ *
+ * Logical      Physical
+ * f0000000	80000000	On-chip registers
+ * f1000000	00000000	32k on-chip SRAM
+ */
+
+static struct map_desc stmp378x_io_desc[] __initdata = {
+	{
+		.virtual	= (u32)STMP3XXX_REGS_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_REGS_PHBASE),
+		.length		= STMP3XXX_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= (u32)STMP3XXX_OCRAM_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
+		.length		= STMP3XXX_OCRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+
+static u64 common_dmamask = DMA_BIT_MASK(32);
+
+/*
+ * devices that are present only on stmp378x, not on all 3xxx boards:
+ * 	PxP
+ * 	I2C
+ */
+static struct resource pxp_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= REGS_PXP_PHYS,
+		.end	= REGS_PXP_PHYS + REGS_PXP_SIZE,
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_PXP,
+		.end	= IRQ_PXP,
+	},
+};
+
+struct platform_device stmp378x_pxp = {
+	.name		= "stmp3xxx-pxp",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(pxp_resource),
+	.resource	= pxp_resource,
+};
+
+static struct resource i2c_resources[] = {
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_I2C_ERROR,
+		.end = IRQ_I2C_ERROR,
+	}, {
+		.flags = IORESOURCE_MEM,
+		.start = REGS_I2C_PHYS,
+		.end = REGS_I2C_PHYS + REGS_I2C_SIZE,
+	}, {
+		.flags = IORESOURCE_DMA,
+		.start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
+		.end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
+	},
+};
+
+struct platform_device stmp378x_i2c = {
+	.name = "i2c_stmp3xxx",
+	.id = 0,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = i2c_resources,
+	.num_resources = ARRAY_SIZE(i2c_resources),
+};
+
+void __init stmp378x_map_io(void)
+{
+	iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc));
+}
diff --git a/arch/arm/mach-stmp378x/stmp378x.h b/arch/arm/mach-stmp378x/stmp378x.h
new file mode 100644
index 00000000000..0dc15b3c891
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x.h
@@ -0,0 +1,25 @@
+/*
+ * Freescale STMP37XX/STMP378X internal functions and data declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __MACH_STMP378X_H
+#define __MACH_STMP378X_H
+
+void stmp378x_map_io(void);
+void stmp378x_init_irq(void);
+
+extern struct platform_device stmp378x_pxp, stmp378x_i2c;
+#endif /* __MACH_STMP378X_COMMON_H */
diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c
new file mode 100644
index 00000000000..90d8fe6f10f
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x_devb.c
@@ -0,0 +1,334 @@
+/*
+ * Freescale STMP378X development board support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/mmc.h>
+#include <mach/gpmi.h>
+
+#include "stmp378x.h"
+
+static struct platform_device *devices[] = {
+	&stmp3xxx_dbguart,
+	&stmp3xxx_appuart,
+	&stmp3xxx_watchdog,
+	&stmp3xxx_touchscreen,
+	&stmp3xxx_rtc,
+	&stmp3xxx_keyboard,
+	&stmp3xxx_framebuffer,
+	&stmp3xxx_backlight,
+	&stmp3xxx_rotdec,
+	&stmp3xxx_persistent,
+	&stmp3xxx_dcp_bootstream,
+	&stmp3xxx_dcp,
+	&stmp3xxx_battery,
+	&stmp378x_pxp,
+	&stmp378x_i2c,
+};
+
+static struct pin_desc i2c_pins_desc[] = {
+	{ PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group i2c_pins = {
+	.pins		= i2c_pins_desc,
+	.nr_pins	= ARRAY_SIZE(i2c_pins_desc),
+};
+
+static struct pin_desc dbguart_pins_0[] = {
+	{ PINID_PWM0, PIN_FUN3, },
+	{ PINID_PWM1, PIN_FUN3, },
+};
+
+static struct pin_group dbguart_pins[] = {
+	[0] = {
+		.pins		= dbguart_pins_0,
+		.nr_pins	= ARRAY_SIZE(dbguart_pins_0),
+	},
+};
+
+static int dbguart_pins_control(int id, int request)
+{
+	int r = 0;
+
+	if (request)
+		r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
+	else
+		stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
+	return r;
+}
+
+static struct pin_desc appuart_pins_0[] = {
+	{ PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+};
+
+static struct pin_desc appuart_pins_1[] = {
+#if 0 /* enable these when second appuart will be connected */
+	{ PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+#endif
+};
+
+static struct pin_desc mmc_pins_desc[] = {
+	{ PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
+	{ PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group mmc_pins = {
+	.pins		= mmc_pins_desc,
+	.nr_pins	= ARRAY_SIZE(mmc_pins_desc),
+};
+
+static int stmp3xxxmmc_get_wp(void)
+{
+	return gpio_get_value(PINID_PWM4);
+}
+
+static int stmp3xxxmmc_hw_init_ssp1(void)
+{
+	int ret;
+
+	ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc");
+	if (ret)
+		goto out;
+
+	/* Configure write protect GPIO pin */
+	ret = gpio_request(PINID_PWM4, "mmc wp");
+	if (ret)
+		goto out_wp;
+
+	gpio_direction_input(PINID_PWM4);
+
+	/* Configure POWER pin as gpio to drive power to MMC slot */
+	ret = gpio_request(PINID_PWM3, "mmc power");
+	if (ret)
+		goto out_power;
+
+	gpio_direction_output(PINID_PWM3, 0);
+	mdelay(100);
+
+	return 0;
+
+out_power:
+	gpio_free(PINID_PWM4);
+out_wp:
+	stmp3xxx_release_pin_group(&mmc_pins, "mmc");
+out:
+	return ret;
+}
+
+static void stmp3xxxmmc_hw_release_ssp1(void)
+{
+	gpio_free(PINID_PWM3);
+	gpio_free(PINID_PWM4);
+	stmp3xxx_release_pin_group(&mmc_pins, "mmc");
+}
+
+static void stmp3xxxmmc_cmd_pullup_ssp1(int enable)
+{
+	stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc");
+}
+
+static unsigned long
+stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz)
+{
+	struct clk *ssp, *parent;
+	char *p;
+	long r;
+
+	ssp = clk_get(NULL, "ssp");
+
+	/* using SSP1, no timeout, clock rate 1 */
+	writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) |
+	       BF(0xFFFF, SSP_TIMING_TIMEOUT),
+	       base + HW_SSP_TIMING);
+
+	p = (hz > 1000000) ? "io" : "osc_24M";
+	parent = clk_get(NULL, p);
+	clk_set_parent(ssp, parent);
+	r = clk_set_rate(ssp, 2 * hz / 1000);
+	clk_put(parent);
+	clk_put(ssp);
+
+	return hz;
+}
+
+static struct stmp3xxxmmc_platform_data mmc_data = {
+	.hw_init	= stmp3xxxmmc_hw_init_ssp1,
+	.hw_release	= stmp3xxxmmc_hw_release_ssp1,
+	.get_wp		= stmp3xxxmmc_get_wp,
+	.cmd_pullup	= stmp3xxxmmc_cmd_pullup_ssp1,
+	.setclock	= stmp3xxxmmc_setclock_ssp1,
+};
+
+
+static struct pin_group appuart_pins[] = {
+	[0] = {
+		.pins		= appuart_pins_0,
+		.nr_pins	= ARRAY_SIZE(appuart_pins_0),
+	},
+	[1] = {
+		.pins		= appuart_pins_1,
+		.nr_pins	= ARRAY_SIZE(appuart_pins_1),
+	},
+};
+
+static struct pin_desc ssp1_pins_desc[] = {
+	{ PINID_SSP1_SCK,	PIN_FUN1, PIN_8MA, PIN_3_3V, 0, },
+	{ PINID_SSP1_CMD,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_SSP1_DATA0,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_SSP1_DATA3,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+};
+
+static struct pin_desc ssp2_pins_desc[] = {
+	{ PINID_GPMI_WRN,	PIN_FUN3, PIN_8MA, PIN_3_3V, 0, },
+	{ PINID_GPMI_RDY1,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_GPMI_D00,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_GPMI_D03,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+};
+
+static struct pin_group ssp1_pins = {
+	.pins = ssp1_pins_desc,
+	.nr_pins = ARRAY_SIZE(ssp1_pins_desc),
+};
+
+static struct pin_group ssp2_pins = {
+	.pins = ssp1_pins_desc,
+	.nr_pins = ARRAY_SIZE(ssp2_pins_desc),
+};
+
+static struct pin_desc gpmi_pins_desc[] = {
+	{ PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group gpmi_pins = {
+	.pins		= gpmi_pins_desc,
+	.nr_pins	= ARRAY_SIZE(gpmi_pins_desc),
+};
+
+static struct mtd_partition gpmi_partitions[] = {
+	[0] = {
+		.name	= "boot",
+		.size	= 10 * SZ_1M,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "data",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= MTDPART_OFS_APPEND,
+	},
+};
+
+static struct gpmi_platform_data gpmi_data = {
+	.pins = &gpmi_pins,
+	.nr_parts = ARRAY_SIZE(gpmi_partitions),
+	.parts = gpmi_partitions,
+	.part_types = { "cmdline", NULL },
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+	{
+		.modalias       = "enc28j60",
+		.max_speed_hz   = 6 * 1000 * 1000,
+		.bus_num	= 1,
+		.chip_select    = 0,
+		.platform_data  = NULL,
+	},
+#endif
+};
+
+static void __init stmp378x_devb_init(void)
+{
+	stmp3xxx_pinmux_init(NR_REAL_IRQS);
+
+	/* init stmp3xxx platform */
+	stmp3xxx_init();
+
+	stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
+	stmp3xxx_appuart.dev.platform_data = appuart_pins;
+	stmp3xxx_mmc.dev.platform_data = &mmc_data;
+	stmp3xxx_gpmi.dev.platform_data = &gpmi_data;
+	stmp3xxx_spi1.dev.platform_data = &ssp1_pins;
+	stmp3xxx_spi2.dev.platform_data = &ssp2_pins;
+	stmp378x_i2c.dev.platform_data = &i2c_pins;
+
+	/* register spi devices */
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+	/* add board's devices */
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* add devices selected by command line ssp1= and ssp2= options */
+	stmp3xxx_ssp1_device_register();
+	stmp3xxx_ssp2_device_register();
+}
+
+MACHINE_START(STMP378X, "STMP378X")
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x40000100,
+	.map_io		= stmp378x_map_io,
+	.init_irq	= stmp378x_init_irq,
+	.timer		= &stmp3xxx_timer,
+	.init_machine	= stmp378x_devb_init,
+MACHINE_END
diff --git a/arch/arm/mach-stmp37xx/Makefile b/arch/arm/mach-stmp37xx/Makefile
new file mode 100644
index 00000000000..57deffd09fb
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_STMP37XX) += stmp37xx.o
+obj-$(CONFIG_MACH_STMP37XX) += stmp37xx_devb.o
diff --git a/arch/arm/mach-stmp37xx/Makefile.boot b/arch/arm/mach-stmp37xx/Makefile.boot
new file mode 100644
index 00000000000..1568ad404d5
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
+initrd_phys-y	:= 0x40800000
diff --git a/arch/arm/mach-stmp37xx/include/mach/entry-macro.S b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S
new file mode 100644
index 00000000000..fed2787b6c3
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * Low-level IRQ helper macros for Freescale STMP37XX
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	        mov	\base, #0xf0000000	@ vm address of IRQ controller
+		ldr	\irqnr, [\base, #0x30]	@ HW_ICOLL_STAT
+		cmp	\irqnr, #0x3f
+		movne	\irqstat, #0		@ Ack this IRQ
+		strne	\irqstat, [\base, #0x00]@ HW_ICOLL_VECTOR
+		moveqs	\irqnr, #0		@ Zero flag set for no IRQ
+
+		.endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
diff --git a/arch/arm/mach-stmp37xx/include/mach/irqs.h b/arch/arm/mach-stmp37xx/include/mach/irqs.h
new file mode 100644
index 00000000000..98f12938550
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/irqs.h
@@ -0,0 +1,99 @@
+/*
+ * Freescale STMP37XX interrupts
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef _ASM_ARCH_IRQS_H
+#define _ASM_ARCH_IRQS_H
+
+#define IRQ_DEBUG_UART	         0
+#define IRQ_COMMS_RX	           1
+#define IRQ_COMMS_TX	           1
+#define IRQ_SSP2_ERROR	         2
+#define IRQ_VDD5V	              3
+#define IRQ_HEADPHONE_SHORT	    4
+#define IRQ_DAC_DMA	            5
+#define IRQ_DAC_ERROR	          6
+#define IRQ_ADC_DMA	            7
+#define IRQ_ADC_ERROR	          8
+#define IRQ_SPDIF_DMA	          9
+#define IRQ_SAIF2_DMA	          9
+#define IRQ_SPDIF_ERROR	        10
+#define IRQ_SAIF1_IRQ	          10
+#define IRQ_SAIF2_IRQ	          10
+#define IRQ_USB_CTRL	           11
+#define IRQ_USB_WAKEUP	         12
+#define IRQ_GPMI_DMA	           13
+#define IRQ_SSP1_DMA	           14
+#define IRQ_SSP_ERROR	          15
+#define IRQ_GPIO0	              16
+#define IRQ_GPIO1	              17
+#define IRQ_GPIO2	              18
+#define IRQ_SAIF1_DMA	          19
+#define IRQ_SSP2_DMA	           20
+#define IRQ_ECC8_IRQ	           21
+#define IRQ_RTC_ALARM	          22
+#define IRQ_UARTAPP_TX_DMA	     23
+#define IRQ_UARTAPP_INTERNAL	   24
+#define IRQ_UARTAPP_RX_DMA	     25
+#define IRQ_I2C_DMA	            26
+#define IRQ_I2C_ERROR	          27
+#define IRQ_TIMER0	             28
+#define IRQ_TIMER1	             29
+#define IRQ_TIMER2	             30
+#define IRQ_TIMER3	             31
+#define IRQ_BATT_BRNOUT	        32
+#define IRQ_VDDD_BRNOUT	        33
+#define IRQ_VDDIO_BRNOUT	       34
+#define IRQ_VDD18_BRNOUT	       35
+#define IRQ_TOUCH_DETECT	       36
+#define IRQ_LRADC_CH0	          37
+#define IRQ_LRADC_CH1	          38
+#define IRQ_LRADC_CH2	          39
+#define IRQ_LRADC_CH3	          40
+#define IRQ_LRADC_CH4	          41
+#define IRQ_LRADC_CH5	          42
+#define IRQ_LRADC_CH6	          43
+#define IRQ_LRADC_CH7	          44
+#define IRQ_LCDIF_DMA	          45
+#define IRQ_LCDIF_ERROR	        46
+#define IRQ_DIGCTL_DEBUG_TRAP	  47
+#define IRQ_RTC_1MSEC	          48
+#define IRQ_DRI_DMA	            49
+#define IRQ_DRI_ATTENTION	      50
+#define IRQ_GPMI_ATTENTION	     51
+#define IRQ_IR	                 52
+#define IRQ_DCP_VMI	            53
+#define IRQ_DCP	                54
+#define IRQ_RESERVED_55	        55
+#define IRQ_RESERVED_56	        56
+#define IRQ_RESERVED_57	        57
+#define IRQ_RESERVED_58	        58
+#define IRQ_RESERVED_59	        59
+#define SW_IRQ_60	              60
+#define SW_IRQ_61	              61
+#define SW_IRQ_62	              62
+#define SW_IRQ_63	              63
+
+#define NR_REAL_IRQS		64
+#define NR_IRQS			(NR_REAL_IRQS + 32 * 3)
+
+/* TIMER and BRNOUT are FIQ capable */
+#define FIQ_START			IRQ_TIMER0
+
+/* Hard disk IRQ is a GPMI attention IRQ */
+#define IRQ_HARDDISK		IRQ_GPMI_ATTENTION
+
+#endif /* _ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-stmp37xx/include/mach/pins.h b/arch/arm/mach-stmp37xx/include/mach/pins.h
new file mode 100644
index 00000000000..d56de0c471d
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/pins.h
@@ -0,0 +1,147 @@
+/*
+ * Freescale STMP37XX SoC pin multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_PINS_H
+#define __ASM_ARCH_PINS_H
+
+/*
+ * Define all STMP37XX pins, a pin name corresponds to a STMP37xx hardware
+ * interface  this pin belongs to.
+ */
+
+/* Bank 0 */
+#define PINID_GPMI_D00		STMP3XXX_PINID(0, 0)
+#define PINID_GPMI_D01		STMP3XXX_PINID(0, 1)
+#define PINID_GPMI_D02		STMP3XXX_PINID(0, 2)
+#define PINID_GPMI_D03		STMP3XXX_PINID(0, 3)
+#define PINID_GPMI_D04		STMP3XXX_PINID(0, 4)
+#define PINID_GPMI_D05		STMP3XXX_PINID(0, 5)
+#define PINID_GPMI_D06		STMP3XXX_PINID(0, 6)
+#define PINID_GPMI_D07		STMP3XXX_PINID(0, 7)
+#define PINID_GPMI_D08		STMP3XXX_PINID(0, 8)
+#define PINID_GPMI_D09		STMP3XXX_PINID(0, 9)
+#define PINID_GPMI_D10		STMP3XXX_PINID(0, 10)
+#define PINID_GPMI_D11		STMP3XXX_PINID(0, 11)
+#define PINID_GPMI_D12		STMP3XXX_PINID(0, 12)
+#define PINID_GPMI_D13		STMP3XXX_PINID(0, 13)
+#define PINID_GPMI_D14		STMP3XXX_PINID(0, 14)
+#define PINID_GPMI_D15		STMP3XXX_PINID(0, 15)
+#define PINID_GPMI_A0		STMP3XXX_PINID(0, 16)
+#define PINID_GPMI_A1		STMP3XXX_PINID(0, 17)
+#define PINID_GPMI_A2		STMP3XXX_PINID(0, 18)
+#define PINID_GPMI_RDY0		STMP3XXX_PINID(0, 19)
+#define PINID_GPMI_RDY2		STMP3XXX_PINID(0, 20)
+#define PINID_GPMI_RDY3		STMP3XXX_PINID(0, 21)
+#define PINID_GPMI_RESETN	STMP3XXX_PINID(0, 22)
+#define PINID_GPMI_IRQ		STMP3XXX_PINID(0, 23)
+#define PINID_GPMI_WRN		STMP3XXX_PINID(0, 24)
+#define PINID_GPMI_RDN		STMP3XXX_PINID(0, 25)
+#define PINID_UART2_CTS		STMP3XXX_PINID(0, 26)
+#define PINID_UART2_RTS		STMP3XXX_PINID(0, 27)
+#define PINID_UART2_RX		STMP3XXX_PINID(0, 28)
+#define PINID_UART2_TX		STMP3XXX_PINID(0, 29)
+
+/* Bank 1 */
+#define PINID_LCD_D00		STMP3XXX_PINID(1, 0)
+#define PINID_LCD_D01		STMP3XXX_PINID(1, 1)
+#define PINID_LCD_D02		STMP3XXX_PINID(1, 2)
+#define PINID_LCD_D03		STMP3XXX_PINID(1, 3)
+#define PINID_LCD_D04		STMP3XXX_PINID(1, 4)
+#define PINID_LCD_D05		STMP3XXX_PINID(1, 5)
+#define PINID_LCD_D06		STMP3XXX_PINID(1, 6)
+#define PINID_LCD_D07		STMP3XXX_PINID(1, 7)
+#define PINID_LCD_D08		STMP3XXX_PINID(1, 8)
+#define PINID_LCD_D09		STMP3XXX_PINID(1, 9)
+#define PINID_LCD_D10		STMP3XXX_PINID(1, 10)
+#define PINID_LCD_D11		STMP3XXX_PINID(1, 11)
+#define PINID_LCD_D12		STMP3XXX_PINID(1, 12)
+#define PINID_LCD_D13		STMP3XXX_PINID(1, 13)
+#define PINID_LCD_D14		STMP3XXX_PINID(1, 14)
+#define PINID_LCD_D15		STMP3XXX_PINID(1, 15)
+#define PINID_LCD_RESET 	STMP3XXX_PINID(1, 16)
+#define PINID_LCD_RS		STMP3XXX_PINID(1, 17)
+#define PINID_LCD_WR_RWN	STMP3XXX_PINID(1, 18)
+#define PINID_LCD_RD_E		STMP3XXX_PINID(1, 19)
+#define PINID_LCD_CS		STMP3XXX_PINID(1, 20)
+#define PINID_LCD_BUSY		STMP3XXX_PINID(1, 21)
+#define PINID_SSP1_CMD		STMP3XXX_PINID(1, 22)
+#define PINID_SSP1_SCK		STMP3XXX_PINID(1, 23)
+#define PINID_SSP1_DATA0	STMP3XXX_PINID(1, 24)
+#define PINID_SSP1_DATA1	STMP3XXX_PINID(1, 25)
+#define PINID_SSP1_DATA2	STMP3XXX_PINID(1, 26)
+#define PINID_SSP1_DATA3	STMP3XXX_PINID(1, 27)
+#define PINID_SSP1_DETECT	STMP3XXX_PINID(1, 28)
+
+/* Bank 2 */
+#define PINID_PWM0		STMP3XXX_PINID(2, 0)
+#define PINID_PWM1		STMP3XXX_PINID(2, 1)
+#define PINID_PWM2		STMP3XXX_PINID(2, 2)
+#define PINID_PWM3		STMP3XXX_PINID(2, 3)
+#define PINID_PWM4		STMP3XXX_PINID(2, 4)
+#define PINID_I2C_SCL		STMP3XXX_PINID(2, 5)
+#define PINID_I2C_SDA		STMP3XXX_PINID(2, 6)
+#define PINID_ROTTARYA		STMP3XXX_PINID(2, 7)
+#define PINID_ROTTARYB		STMP3XXX_PINID(2, 8)
+#define PINID_EMI_CKE		STMP3XXX_PINID(2, 9)
+#define PINID_EMI_RASN		STMP3XXX_PINID(2, 10)
+#define PINID_EMI_CASN		STMP3XXX_PINID(2, 11)
+#define PINID_EMI_CE0N		STMP3XXX_PINID(2, 12)
+#define PINID_EMI_CE1N		STMP3XXX_PINID(2, 13)
+#define PINID_EMI_CE2N		STMP3XXX_PINID(2, 14)
+#define PINID_EMI_CE3N		STMP3XXX_PINID(2, 15)
+#define PINID_EMI_A00		STMP3XXX_PINID(2, 16)
+#define PINID_EMI_A01		STMP3XXX_PINID(2, 17)
+#define PINID_EMI_A02		STMP3XXX_PINID(2, 18)
+#define PINID_EMI_A03		STMP3XXX_PINID(2, 19)
+#define PINID_EMI_A04		STMP3XXX_PINID(2, 20)
+#define PINID_EMI_A05		STMP3XXX_PINID(2, 21)
+#define PINID_EMI_A06		STMP3XXX_PINID(2, 22)
+#define PINID_EMI_A07		STMP3XXX_PINID(2, 23)
+#define PINID_EMI_A08		STMP3XXX_PINID(2, 24)
+#define PINID_EMI_A09		STMP3XXX_PINID(2, 25)
+#define PINID_EMI_A10		STMP3XXX_PINID(2, 26)
+#define PINID_EMI_A11		STMP3XXX_PINID(2, 27)
+#define PINID_EMI_A12		STMP3XXX_PINID(2, 28)
+#define PINID_EMI_A13		STMP3XXX_PINID(2, 29)
+#define PINID_EMI_A14		STMP3XXX_PINID(2, 30)
+#define PINID_EMI_WEN		STMP3XXX_PINID(2, 31)
+
+/* Bank 3 */
+#define PINID_EMI_D00		STMP3XXX_PINID(3, 0)
+#define PINID_EMI_D01		STMP3XXX_PINID(3, 1)
+#define PINID_EMI_D02		STMP3XXX_PINID(3, 2)
+#define PINID_EMI_D03		STMP3XXX_PINID(3, 3)
+#define PINID_EMI_D04		STMP3XXX_PINID(3, 4)
+#define PINID_EMI_D05		STMP3XXX_PINID(3, 5)
+#define PINID_EMI_D06		STMP3XXX_PINID(3, 6)
+#define PINID_EMI_D07		STMP3XXX_PINID(3, 7)
+#define PINID_EMI_D08		STMP3XXX_PINID(3, 8)
+#define PINID_EMI_D09		STMP3XXX_PINID(3, 9)
+#define PINID_EMI_D10		STMP3XXX_PINID(3, 10)
+#define PINID_EMI_D11		STMP3XXX_PINID(3, 11)
+#define PINID_EMI_D12		STMP3XXX_PINID(3, 12)
+#define PINID_EMI_D13		STMP3XXX_PINID(3, 13)
+#define PINID_EMI_D14		STMP3XXX_PINID(3, 14)
+#define PINID_EMI_D15		STMP3XXX_PINID(3, 15)
+#define PINID_EMI_DQS0		STMP3XXX_PINID(3, 16)
+#define PINID_EMI_DQS1		STMP3XXX_PINID(3, 17)
+#define PINID_EMI_DQM0		STMP3XXX_PINID(3, 18)
+#define PINID_EMI_DQM1		STMP3XXX_PINID(3, 19)
+#define PINID_EMI_CLK		STMP3XXX_PINID(3, 20)
+#define PINID_EMI_CLKN		STMP3XXX_PINID(3, 21)
+
+#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h
new file mode 100644
index 00000000000..a323aa9a21f
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h
@@ -0,0 +1,97 @@
+/*
+ * stmp37xx: APBH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBH
+#define _MACH_REGS_APBH
+
+#define REGS_APBH_BASE	(STMP3XXX_REGS_BASE + 0x4000)
+
+#define HW_APBH_CTRL0		0x0
+#define BM_APBH_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBH_CTRL0_RESET_CHANNEL	16
+#define BM_APBH_CTRL0_CLKGATE	0x40000000
+#define BM_APBH_CTRL0_SFTRST	0x80000000
+
+#define HW_APBH_CTRL1		0x10
+#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0x00000001
+#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0
+
+#define HW_APBH_DEVSEL		0x20
+
+#define HW_APBH_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBH_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBH_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBH_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBH_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBH_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBH_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBH_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBH_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBH_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBH_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBH_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBH_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBH_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBH_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBH_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBH_CHn_NXTCMDAR	0x50
+
+#define BM_APBH_CHn_CMD_MODE		0x00000003
+#define BP_APBH_CHn_CMD_MODE		0x00000001
+#define BV_APBH_CHn_CMD_MODE_NOOP		 0
+#define BV_APBH_CHn_CMD_MODE_WRITE		 1
+#define BV_APBH_CHn_CMD_MODE_READ		 2
+#define BV_APBH_CHn_CMD_MODE_SENSE		 3
+#define BM_APBH_CHn_CMD_CHAIN		0x00000004
+#define BM_APBH_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBH_CHn_CMD_NANDLOCK	0x00000010
+#define BM_APBH_CHn_CMD_NANDWAIT4READY	0x00000020
+#define BM_APBH_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBH_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBH_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBH_CHn_CMD_CMDWORDS	12
+#define BM_APBH_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBH_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBH_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBH_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBH_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBH_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBH_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBH_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBH_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBH_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBH_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBH_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBH_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBH_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBH_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBH_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBH_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBH_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBH_CHn_SEMA	0x80
+#define BM_APBH_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBH_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBH_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBH_CHn_SEMA_PHORE	16
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h
new file mode 100644
index 00000000000..6d080cd5b70
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h
@@ -0,0 +1,113 @@
+/*
+ * stmp37xx: APBX register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBX
+#define _MACH_REGS_APBX
+
+#define REGS_APBX_BASE	(STMP3XXX_REGS_BASE + 0x24000)
+
+#define HW_APBX_CTRL0		0x0
+#define BM_APBX_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBX_CTRL0_RESET_CHANNEL	16
+#define BM_APBX_CTRL0_CLKGATE	0x40000000
+#define BM_APBX_CTRL0_SFTRST	0x80000000
+
+#define HW_APBX_CTRL1		0x10
+
+#define HW_APBX_DEVSEL		0x20
+
+#define HW_APBX_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBX_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBX_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBX_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBX_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBX_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBX_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBX_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBX_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBX_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBX_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBX_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBX_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBX_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBX_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBX_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBX_CHn_NXTCMDAR	0x50
+#define BM_APBX_CHn_CMD_MODE		0x00000003
+#define BP_APBX_CHn_CMD_MODE		0x00000001
+#define BV_APBX_CHn_CMD_MODE_NOOP		 0
+#define BV_APBX_CHn_CMD_MODE_WRITE		 1
+#define BV_APBX_CHn_CMD_MODE_READ		 2
+#define BV_APBX_CHn_CMD_MODE_SENSE		 3
+#define BM_APBX_CHn_CMD_COMMAND	0x00000003
+#define BP_APBX_CHn_CMD_COMMAND	0
+#define BM_APBX_CHn_CMD_CHAIN	0x00000004
+#define BM_APBX_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBX_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBX_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBX_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBX_CHn_CMD_CMDWORDS	12
+#define BM_APBX_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBX_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBX_CH0_BAR		(0x70 + 0 * 0x70)
+#define HW_APBX_CH1_BAR		(0x70 + 1 * 0x70)
+#define HW_APBX_CH2_BAR		(0x70 + 2 * 0x70)
+#define HW_APBX_CH3_BAR		(0x70 + 3 * 0x70)
+#define HW_APBX_CH4_BAR		(0x70 + 4 * 0x70)
+#define HW_APBX_CH5_BAR		(0x70 + 5 * 0x70)
+#define HW_APBX_CH6_BAR		(0x70 + 6 * 0x70)
+#define HW_APBX_CH7_BAR		(0x70 + 7 * 0x70)
+#define HW_APBX_CH8_BAR		(0x70 + 8 * 0x70)
+#define HW_APBX_CH9_BAR		(0x70 + 9 * 0x70)
+#define HW_APBX_CH10_BAR		(0x70 + 10 * 0x70)
+#define HW_APBX_CH11_BAR		(0x70 + 11 * 0x70)
+#define HW_APBX_CH12_BAR		(0x70 + 12 * 0x70)
+#define HW_APBX_CH13_BAR		(0x70 + 13 * 0x70)
+#define HW_APBX_CH14_BAR		(0x70 + 14 * 0x70)
+#define HW_APBX_CH15_BAR		(0x70 + 15 * 0x70)
+
+#define HW_APBX_CHn_BAR		0x70
+
+#define HW_APBX_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBX_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBX_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBX_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBX_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBX_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBX_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBX_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBX_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBX_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBX_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBX_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBX_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBX_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBX_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBX_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBX_CHn_SEMA	0x80
+#define BM_APBX_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBX_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBX_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBX_CHn_SEMA_PHORE	16
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h
new file mode 100644
index 00000000000..3b511f947a5
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h
@@ -0,0 +1,61 @@
+/*
+ * stmp37xx: AUDIOIN register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOIN_BASE	(STMP3XXX_REGS_BASE + 0x4C000)
+
+#define HW_AUDIOIN_CTRL		0x0
+#define BM_AUDIOIN_CTRL_RUN	0x00000001
+#define BP_AUDIOIN_CTRL_RUN	0
+#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOIN_CTRL_WORD_LENGTH	0x00000020
+#define BM_AUDIOIN_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOIN_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOIN_STAT		0x10
+
+#define HW_AUDIOIN_ADCSRR	0x20
+
+#define HW_AUDIOIN_ADCVOLUME	0x30
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0x000000FF
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT	0x00FF0000
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT	16
+
+#define HW_AUDIOIN_ADCDEBUG	0x40
+
+#define HW_AUDIOIN_ADCVOL	0x50
+#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT	0x0000000F
+#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT	0
+#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT	0x00000030
+#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT	4
+#define BM_AUDIOIN_ADCVOL_GAIN_LEFT	0x00000F00
+#define BP_AUDIOIN_ADCVOL_GAIN_LEFT	8
+#define BM_AUDIOIN_ADCVOL_SELECT_LEFT	0x00003000
+#define BP_AUDIOIN_ADCVOL_SELECT_LEFT	12
+#define BM_AUDIOIN_ADCVOL_MUTE	0x01000000
+
+#define HW_AUDIOIN_MICLINE	0x60
+
+#define HW_AUDIOIN_ANACLKCTRL	0x70
+#define BM_AUDIOIN_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOIN_DATA		0x80
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h
new file mode 100644
index 00000000000..ca1942b8a3e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h
@@ -0,0 +1,111 @@
+/*
+ * stmp37xx: AUDIOOUT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOOUT_BASE	(STMP3XXX_REGS_BASE + 0x48000)
+
+#define HW_AUDIOOUT_CTRL	0x0
+#define BM_AUDIOOUT_CTRL_RUN	0x00000001
+#define BP_AUDIOOUT_CTRL_RUN	0
+#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOOUT_CTRL_WORD_LENGTH	0x00000040
+#define BM_AUDIOOUT_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOOUT_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOOUT_STAT	0x10
+
+#define HW_AUDIOOUT_DACSRR	0x20
+#define BM_AUDIOOUT_DACSRR_SRC_FRAC	0x00001FFF
+#define BP_AUDIOOUT_DACSRR_SRC_FRAC	0
+#define BM_AUDIOOUT_DACSRR_SRC_INT	0x001F0000
+#define BP_AUDIOOUT_DACSRR_SRC_INT	16
+#define BM_AUDIOOUT_DACSRR_SRC_HOLD	0x07000000
+#define BP_AUDIOOUT_DACSRR_SRC_HOLD	24
+#define BM_AUDIOOUT_DACSRR_BASEMULT	0x70000000
+#define BP_AUDIOOUT_DACSRR_BASEMULT	28
+
+#define HW_AUDIOOUT_DACVOLUME	0x30
+#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT	0x00000100
+#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT	0x01000000
+#define BM_AUDIOOUT_DACVOLUME_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_DACDEBUG	0x40
+
+#define HW_AUDIOOUT_HPVOL	0x50
+#define BM_AUDIOOUT_HPVOL_MUTE	0x01000000
+#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD	0x02000000
+
+#define HW_AUDIOOUT_PWRDN	0x70
+#define BM_AUDIOOUT_PWRDN_HEADPHONE	0x00000001
+#define BP_AUDIOOUT_PWRDN_HEADPHONE	0
+#define BM_AUDIOOUT_PWRDN_CAPLESS	0x00000010
+#define BM_AUDIOOUT_PWRDN_ADC	0x00000100
+#define BM_AUDIOOUT_PWRDN_DAC	0x00001000
+#define BM_AUDIOOUT_PWRDN_RIGHT_ADC	0x00010000
+#define BM_AUDIOOUT_PWRDN_LINEOUT	0x01000000
+
+#define HW_AUDIOOUT_REFCTRL	0x80
+#define BM_AUDIOOUT_REFCTRL_VAG_VAL	0x000000F0
+#define BP_AUDIOOUT_REFCTRL_VAG_VAL	4
+#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL	0x00000F00
+#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL	8
+#define BM_AUDIOOUT_REFCTRL_ADJ_VAG	0x00001000
+#define BM_AUDIOOUT_REFCTRL_ADJ_ADC	0x00002000
+#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL	0x00030000
+#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL	16
+#define BM_AUDIOOUT_REFCTRL_LOW_PWR	0x00080000
+#define BM_AUDIOOUT_REFCTRL_VBG_ADJ	0x00700000
+#define BP_AUDIOOUT_REFCTRL_VBG_ADJ	20
+#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS	0x01000000
+#define BM_AUDIOOUT_REFCTRL_RAISE_REF	0x02000000
+
+#define HW_AUDIOOUT_ANACTRL	0x90
+#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB	0x00000010
+#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND	0x00000020
+
+#define HW_AUDIOOUT_TEST	0xA0
+#define BM_AUDIOOUT_TEST_HP_I1_ADJ	0x00C00000
+#define BP_AUDIOOUT_TEST_HP_I1_ADJ	22
+
+#define HW_AUDIOOUT_BISTCTRL	0xB0
+
+#define HW_AUDIOOUT_BISTSTAT0	0xC0
+
+#define HW_AUDIOOUT_BISTSTAT1	0xD0
+
+#define HW_AUDIOOUT_ANACLKCTRL	0xE0
+#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOOUT_DATA	0xF0
+
+#define HW_AUDIOOUT_LINEOUTCTRL	0x100
+#define BM_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT	0x0000001F
+#define BP_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT	0
+#define BM_AUDIOOUT_LINEOUTCTRL_VOL_LEFT	0x00001F00
+#define BP_AUDIOOUT_LINEOUTCTRL_VOL_LEFT	8
+#define BM_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP	0x00007000
+#define BP_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP	12
+#define BM_AUDIOOUT_LINEOUTCTRL_VAG_CTRL	0x00F00000
+#define BP_AUDIOOUT_LINEOUTCTRL_VAG_CTRL	20
+#define BM_AUDIOOUT_LINEOUTCTRL_MUTE	0x01000000
+#define BM_AUDIOOUT_LINEOUTCTRL_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_VERSION	0x200
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h
new file mode 100644
index 00000000000..47f5c92fdaf
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h
@@ -0,0 +1,72 @@
+/*
+ * stmp37xx: CLKCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_CLKCTRL
+#define _MACH_REGS_CLKCTRL
+
+#define REGS_CLKCTRL_BASE	(STMP3XXX_REGS_BASE + 0x40000)
+
+#define HW_CLKCTRL_PLLCTRL0	0x0
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
+
+#define HW_CLKCTRL_CPU		0x20
+#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
+#define BP_CLKCTRL_CPU_DIV_CPU	0
+
+#define HW_CLKCTRL_HBUS		0x30
+#define BM_CLKCTRL_HBUS_DIV	0x0000001F
+#define BP_CLKCTRL_HBUS_DIV	0
+
+#define HW_CLKCTRL_XBUS		0x40
+
+#define HW_CLKCTRL_XTAL		0x50
+
+#define HW_CLKCTRL_PIX		0x60
+#define BM_CLKCTRL_PIX_DIV	0x00007FFF
+#define BP_CLKCTRL_PIX_DIV	0
+#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
+
+#define HW_CLKCTRL_SSP		0x70
+
+#define HW_CLKCTRL_GPMI		0x80
+
+#define HW_CLKCTRL_SPDIF	0x90
+
+#define HW_CLKCTRL_EMI		0xA0
+
+#define HW_CLKCTRL_IR		0xB0
+
+#define HW_CLKCTRL_SAIF		0xC0
+
+#define HW_CLKCTRL_FRAC		0xD0
+#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
+#define BP_CLKCTRL_FRAC_EMIFRAC	8
+#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
+#define BP_CLKCTRL_FRAC_PIXFRAC	16
+#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
+
+#define HW_CLKCTRL_CLKSEQ	0xE0
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
+
+#define HW_CLKCTRL_RESET	0xF0
+#define BM_CLKCTRL_RESET_DIG	0x00000001
+#define BP_CLKCTRL_RESET_DIG	0
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h
new file mode 100644
index 00000000000..ba1bbe265c2
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h
@@ -0,0 +1,24 @@
+/*
+ * stmp37xx: DIGCTL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DIGCTL_BASE	(STMP3XXX_REGS_BASE + 0x1C000)
+
+#define HW_DIGCTL_CTRL		0x0
+#define BM_DIGCTL_CTRL_USB_CLKGATE	0x00000004
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h
new file mode 100644
index 00000000000..3b6d990a3af
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h
@@ -0,0 +1,37 @@
+/*
+ * stmp37xx: ECC8 register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_ECC8_BASE	(STMP3XXX_REGS_BASE + 0x8000)
+
+#define HW_ECC8_CTRL		0x0
+#define BM_ECC8_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_ECC8_CTRL_COMPLETE_IRQ	0
+#define BM_ECC8_CTRL_COMPLETE_IRQ_EN	0x00000100
+#define BM_ECC8_CTRL_AHBM_SFTRST	0x20000000
+
+#define HW_ECC8_STATUS0		0x10
+#define BM_ECC8_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_ECC8_STATUS0_CORRECTED	0x00000008
+#define BM_ECC8_STATUS0_STATUS_AUX	0x00000F00
+#define BP_ECC8_STATUS0_STATUS_AUX	8
+#define BM_ECC8_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_ECC8_STATUS0_COMPLETED_CE	16
+
+#define HW_ECC8_STATUS1		0x20
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h
new file mode 100644
index 00000000000..f2b304f5449
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h
@@ -0,0 +1,63 @@
+/*
+ * stmp37xx: GPMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_GPMI_BASE	(STMP3XXX_REGS_BASE + 0xC000)
+#define REGS_GPMI_PHYS	0x8000C000
+#define REGS_GPMI_SIZE	0x2000
+
+#define HW_GPMI_CTRL0		0x0
+#define BM_GPMI_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_GPMI_CTRL0_XFER_COUNT	0
+#define BM_GPMI_CTRL0_CS	0x00300000
+#define BP_GPMI_CTRL0_CS	20
+#define BM_GPMI_CTRL0_LOCK_CS	0x00400000
+#define BM_GPMI_CTRL0_WORD_LENGTH	0x00800000
+#define BM_GPMI_CTRL0_COMMAND_MODE	0x03000000
+#define BP_GPMI_CTRL0_COMMAND_MODE	24
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE	    0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ	     0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
+#define BM_GPMI_CTRL0_RUN	0x20000000
+#define BM_GPMI_CTRL0_CLKGATE	0x40000000
+#define BM_GPMI_CTRL0_SFTRST	0x80000000
+#define BM_GPMI_ECCCTRL_ENABLE_ECC	0x00001000
+#define BM_GPMI_ECCCTRL_ECC_CMD	0x00006000
+#define BP_GPMI_ECCCTRL_ECC_CMD	13
+
+#define HW_GPMI_CTRL1		0x60
+#define BM_GPMI_CTRL1_GPMI_MODE	0x00000003
+#define BP_GPMI_CTRL1_GPMI_MODE	0
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY	0x00000004
+#define BM_GPMI_CTRL1_DEV_RESET	0x00000008
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ	0x00000200
+#define BM_GPMI_CTRL1_DEV_IRQ	0x00000400
+#define BM_GPMI_CTRL1_DSAMPLE_TIME	0x00007000
+#define BP_GPMI_CTRL1_DSAMPLE_TIME	12
+
+#define HW_GPMI_TIMING0		0x70
+#define BM_GPMI_TIMING0_DATA_SETUP	0x000000FF
+#define BP_GPMI_TIMING0_DATA_SETUP	0
+#define BM_GPMI_TIMING0_DATA_HOLD	0x0000FF00
+#define BP_GPMI_TIMING0_DATA_HOLD	8
+
+#define HW_GPMI_TIMING1		0x80
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	0xFFFF0000
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	16
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h
new file mode 100644
index 00000000000..35882a9b8bc
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h
@@ -0,0 +1,55 @@
+/*
+ * stmp37xx: I2C register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_I2C_BASE	(STMP3XXX_REGS_BASE + 0x58000)
+#define REGS_I2C_PHYS	0x80058000
+#define REGS_I2C_SIZE	0x2000
+
+#define HW_I2C_CTRL0		0x0
+#define BM_I2C_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_I2C_CTRL0_XFER_COUNT	0
+#define BM_I2C_CTRL0_DIRECTION	0x00010000
+#define BM_I2C_CTRL0_MASTER_MODE	0x00020000
+#define BM_I2C_CTRL0_PRE_SEND_START	0x00080000
+#define BM_I2C_CTRL0_POST_SEND_STOP	0x00100000
+#define BM_I2C_CTRL0_RETAIN_CLOCK	0x00200000
+#define BM_I2C_CTRL0_SEND_NAK_ON_LAST	0x02000000
+#define BM_I2C_CTRL0_CLKGATE	0x40000000
+#define BM_I2C_CTRL0_SFTRST	0x80000000
+
+#define HW_I2C_TIMING0		0x10
+
+#define HW_I2C_TIMING1		0x20
+
+#define HW_I2C_TIMING2		0x30
+
+#define HW_I2C_CTRL1		0x40
+#define BM_I2C_CTRL1_SLAVE_IRQ	0x00000001
+#define BP_I2C_CTRL1_SLAVE_IRQ	0
+#define BM_I2C_CTRL1_SLAVE_STOP_IRQ	0x00000002
+#define BM_I2C_CTRL1_MASTER_LOSS_IRQ	0x00000004
+#define BM_I2C_CTRL1_EARLY_TERM_IRQ	0x00000008
+#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	0x00000010
+#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ	0x00000020
+#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ	0x00000040
+#define BM_I2C_CTRL1_BUS_FREE_IRQ	0x00000080
+#define BM_I2C_CTRL1_CLR_GOT_A_NAK	0x10000000
+
+#define HW_I2C_VERSION		0x90
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h
new file mode 100644
index 00000000000..3b7c92239e2
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h
@@ -0,0 +1,43 @@
+/*
+ * stmp37xx: ICOLL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_ICOLL
+#define _MACH_REGS_ICOLL
+
+#define REGS_ICOLL_BASE	(STMP3XXX_REGS_BASE + 0x0)
+
+#define HW_ICOLL_VECTOR		0x0
+
+#define HW_ICOLL_LEVELACK	0x10
+
+#define HW_ICOLL_CTRL		0x20
+#define BM_ICOLL_CTRL_CLKGATE	0x40000000
+#define BM_ICOLL_CTRL_SFTRST	0x80000000
+
+#define HW_ICOLL_STAT		0x30
+
+#define HW_ICOLL_PRIORITY0	(0x60 + 0 * 0x10)
+#define HW_ICOLL_PRIORITY1	(0x60 + 1 * 0x10)
+#define HW_ICOLL_PRIORITY2	(0x60 + 2 * 0x10)
+#define HW_ICOLL_PRIORITY3	(0x60 + 3 * 0x10)
+
+#define HW_ICOLL_PRIORITYn	0x60
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h
new file mode 100644
index 00000000000..72514e8b073
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h
@@ -0,0 +1,89 @@
+/*
+ * stmp37xx: LCDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LCDIF_BASE	(STMP3XXX_REGS_BASE + 0x30000)
+#define REGS_LCDIF_PHYS	0x80030000
+#define REGS_LCDIF_SIZE	0x2000
+
+#define HW_LCDIF_CTRL		0x0
+#define BM_LCDIF_CTRL_COUNT	0x0000FFFF
+#define BP_LCDIF_CTRL_COUNT	0
+#define BM_LCDIF_CTRL_RUN	0x00010000
+#define BM_LCDIF_CTRL_WORD_LENGTH	0x00020000
+#define BM_LCDIF_CTRL_DATA_SELECT	0x00040000
+#define BM_LCDIF_CTRL_DOTCLK_MODE	0x00080000
+#define BM_LCDIF_CTRL_VSYNC_MODE	0x00100000
+#define BM_LCDIF_CTRL_DATA_SWIZZLE	0x00600000
+#define BP_LCDIF_CTRL_DATA_SWIZZLE	21
+#define BM_LCDIF_CTRL_BYPASS_COUNT	0x00800000
+#define BM_LCDIF_CTRL_SHIFT_NUM_BITS	0x06000000
+#define BP_LCDIF_CTRL_SHIFT_NUM_BITS	25
+#define BM_LCDIF_CTRL_DATA_SHIFT_DIR	0x08000000
+#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE	0x10000000
+#define BM_LCDIF_CTRL_CLKGATE	0x40000000
+#define BM_LCDIF_CTRL_SFTRST	0x80000000
+
+#define HW_LCDIF_CTRL1		0x10
+#define BM_LCDIF_CTRL1_RESET	0x00000001
+#define BP_LCDIF_CTRL1_RESET	0
+#define BM_LCDIF_CTRL1_MODE86	0x00000002
+#define BM_LCDIF_CTRL1_BUSY_ENABLE	0x00000004
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ	0x00000100
+#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ	0x00000200
+#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ	0x00000400
+#define BM_LCDIF_CTRL1_OVERFLOW_IRQ	0x00000800
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN	0x00001000
+#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT	0x000F0000
+#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT	16
+
+#define HW_LCDIF_TIMING		0x20
+
+#define HW_LCDIF_VDCTRL0	0x30
+#define BM_LCDIF_VDCTRL0_VALID_DATA_CNT	0x000003FF
+#define BP_LCDIF_VDCTRL0_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	0x00100000
+#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT	0x00200000
+#define BM_LCDIF_VDCTRL0_ENABLE_POL	0x01000000
+#define BM_LCDIF_VDCTRL0_DOTCLK_POL	0x02000000
+#define BM_LCDIF_VDCTRL0_HSYNC_POL	0x04000000
+#define BM_LCDIF_VDCTRL0_VSYNC_POL	0x08000000
+#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT	0x10000000
+#define BM_LCDIF_VDCTRL0_VSYNC_OEB	0x20000000
+
+#define HW_LCDIF_VDCTRL1	0x40
+#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD	0x000FFFFF
+#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD	0
+#define BM_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH	0xFFF00000
+#define BP_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH	20
+
+#define HW_LCDIF_VDCTRL2	0x50
+#define BM_LCDIF_VDCTRL2_VALID_DATA_CNT	0x000007FF
+#define BP_LCDIF_VDCTRL2_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD	0x007FF800
+#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD	11
+#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	0xFF800000
+#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	23
+
+#define HW_LCDIF_VDCTRL3	0x60
+#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0x000001FF
+#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0
+#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	0x00FFF000
+#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	12
+#define BM_LCDIF_VDCTRL3_SYNC_SIGNALS_ON	0x01000000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h
new file mode 100644
index 00000000000..cc7b4702d1c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h
@@ -0,0 +1,97 @@
+/*
+ * stmp37xx: LRADC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LRADC_BASE	(STMP3XXX_REGS_BASE + 0x50000)
+
+#define HW_LRADC_CTRL0		0x0
+#define BM_LRADC_CTRL0_SCHEDULE	0x000000FF
+#define BP_LRADC_CTRL0_SCHEDULE	0
+#define BM_LRADC_CTRL0_XPLUS_ENABLE	0x00010000
+#define BM_LRADC_CTRL0_YPLUS_ENABLE	0x00020000
+#define BM_LRADC_CTRL0_XMINUS_ENABLE	0x00040000
+#define BM_LRADC_CTRL0_YMINUS_ENABLE	0x00080000
+#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE	0x00100000
+#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF	0x00200000
+#define BM_LRADC_CTRL0_CLKGATE	0x40000000
+#define BM_LRADC_CTRL0_SFTRST	0x80000000
+
+#define HW_LRADC_CTRL1		0x10
+#define BM_LRADC_CTRL1_LRADC0_IRQ	0x00000001
+#define BP_LRADC_CTRL1_LRADC0_IRQ	0
+#define BM_LRADC_CTRL1_LRADC5_IRQ	0x00000020
+#define BM_LRADC_CTRL1_LRADC6_IRQ	0x00000040
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ	0x00000100
+#define BM_LRADC_CTRL1_LRADC0_IRQ_EN	0x00010000
+#define BM_LRADC_CTRL1_LRADC5_IRQ_EN	0x00200000
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN	0x01000000
+
+#define HW_LRADC_CTRL2		0x20
+#define BM_LRADC_CTRL2_BL_BRIGHTNESS	0x001F0000
+#define BP_LRADC_CTRL2_BL_BRIGHTNESS	16
+#define BM_LRADC_CTRL2_BL_MUX_SELECT	0x00200000
+#define BM_LRADC_CTRL2_BL_ENABLE	0x00400000
+#define BM_LRADC_CTRL2_DIVIDE_BY_TWO	0xFF000000
+#define BP_LRADC_CTRL2_DIVIDE_BY_TWO	24
+
+#define HW_LRADC_CTRL3		0x30
+#define BM_LRADC_CTRL3_CYCLE_TIME	0x00000300
+#define BP_LRADC_CTRL3_CYCLE_TIME	8
+
+#define HW_LRADC_STATUS		0x40
+#define BM_LRADC_STATUS_TOUCH_DETECT_RAW	0x00000001
+#define BP_LRADC_STATUS_TOUCH_DETECT_RAW	0
+
+#define HW_LRADC_CH0		(0x50 + 0 * 0x10)
+#define HW_LRADC_CH1		(0x50 + 1 * 0x10)
+#define HW_LRADC_CH2		(0x50 + 2 * 0x10)
+#define HW_LRADC_CH3		(0x50 + 3 * 0x10)
+#define HW_LRADC_CH4		(0x50 + 4 * 0x10)
+#define HW_LRADC_CH5		(0x50 + 5 * 0x10)
+#define HW_LRADC_CH6		(0x50 + 6 * 0x10)
+#define HW_LRADC_CH7		(0x50 + 7 * 0x10)
+
+#define HW_LRADC_CHn		0x50
+#define BM_LRADC_CHn_VALUE	0x0003FFFF
+#define BP_LRADC_CHn_VALUE	0
+#define BM_LRADC_CHn_NUM_SAMPLES	0x1F000000
+#define BP_LRADC_CHn_NUM_SAMPLES	24
+#define BM_LRADC_CHn_ACCUMULATE	0x20000000
+
+#define HW_LRADC_DELAY0		(0xD0 + 0 * 0x10)
+#define HW_LRADC_DELAY1		(0xD0 + 1 * 0x10)
+#define HW_LRADC_DELAY2		(0xD0 + 2 * 0x10)
+#define HW_LRADC_DELAY3		(0xD0 + 3 * 0x10)
+
+#define HW_LRADC_DELAYn		0xD0
+#define BM_LRADC_DELAYn_DELAY	0x000007FF
+#define BP_LRADC_DELAYn_DELAY	0
+#define BM_LRADC_DELAYn_LOOP_COUNT	0x0000F800
+#define BP_LRADC_DELAYn_LOOP_COUNT	11
+#define BM_LRADC_DELAYn_TRIGGER_DELAYS	0x000F0000
+#define BP_LRADC_DELAYn_TRIGGER_DELAYS	16
+#define BM_LRADC_DELAYn_KICK	0x00100000
+#define BM_LRADC_DELAYn_TRIGGER_LRADCS	0xFF000000
+#define BP_LRADC_DELAYn_TRIGGER_LRADCS	24
+
+#define HW_LRADC_CTRL4		0x140
+#define BM_LRADC_CTRL4_LRADC6SELECT	0x0F000000
+#define BP_LRADC_CTRL4_LRADC6SELECT	24
+#define BM_LRADC_CTRL4_LRADC7SELECT	0xF0000000
+#define BP_LRADC_CTRL4_LRADC7SELECT	28
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h
new file mode 100644
index 00000000000..d5efce2388c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h
@@ -0,0 +1,88 @@
+/*
+ * stmp37xx: PINCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_PINCTRL
+#define _MACH_REGS_PINCTRL
+
+#define REGS_PINCTRL_BASE	(STMP3XXX_REGS_BASE + 0x18000)
+
+#define HW_PINCTRL_MUXSEL0	0x100
+#define HW_PINCTRL_MUXSEL1	0x110
+#define HW_PINCTRL_MUXSEL2	0x120
+#define HW_PINCTRL_MUXSEL3	0x130
+#define HW_PINCTRL_MUXSEL4	0x140
+#define HW_PINCTRL_MUXSEL5	0x150
+#define HW_PINCTRL_MUXSEL6	0x160
+#define HW_PINCTRL_MUXSEL7	0x170
+
+#define HW_PINCTRL_DRIVE0	0x200
+#define HW_PINCTRL_DRIVE1	0x210
+#define HW_PINCTRL_DRIVE2	0x220
+#define HW_PINCTRL_DRIVE3	0x230
+#define HW_PINCTRL_DRIVE4	0x240
+#define HW_PINCTRL_DRIVE5	0x250
+#define HW_PINCTRL_DRIVE6	0x260
+#define HW_PINCTRL_DRIVE7	0x270
+#define HW_PINCTRL_DRIVE8	0x280
+#define HW_PINCTRL_DRIVE9	0x290
+#define HW_PINCTRL_DRIVE10	0x2A0
+#define HW_PINCTRL_DRIVE11	0x2B0
+#define HW_PINCTRL_DRIVE12	0x2C0
+#define HW_PINCTRL_DRIVE13	0x2D0
+#define HW_PINCTRL_DRIVE14	0x2E0
+
+#define HW_PINCTRL_PULL0	0x300
+#define HW_PINCTRL_PULL1	0x310
+#define HW_PINCTRL_PULL2	0x320
+#define HW_PINCTRL_PULL3	0x330
+
+#define HW_PINCTRL_DOUT0	0x400
+#define HW_PINCTRL_DOUT1	0x410
+#define HW_PINCTRL_DOUT2	0x420
+
+#define HW_PINCTRL_DIN0		0x500
+#define HW_PINCTRL_DIN1		0x510
+#define HW_PINCTRL_DIN2		0x520
+
+#define HW_PINCTRL_DOE0		0x600
+#define HW_PINCTRL_DOE1		0x610
+#define HW_PINCTRL_DOE2		0x620
+
+#define HW_PINCTRL_PIN2IRQ0	0x700
+#define HW_PINCTRL_PIN2IRQ1	0x710
+#define HW_PINCTRL_PIN2IRQ2	0x720
+
+#define HW_PINCTRL_IRQEN0	0x800
+#define HW_PINCTRL_IRQEN1	0x810
+#define HW_PINCTRL_IRQEN2	0x820
+
+#define HW_PINCTRL_IRQLEVEL0	0x900
+#define HW_PINCTRL_IRQLEVEL1	0x910
+#define HW_PINCTRL_IRQLEVEL2	0x920
+
+#define HW_PINCTRL_IRQPOL0	0xA00
+#define HW_PINCTRL_IRQPOL1	0xA10
+#define HW_PINCTRL_IRQPOL2	0xA20
+
+#define HW_PINCTRL_IRQSTAT0	0xB00
+#define HW_PINCTRL_IRQSTAT1	0xB10
+#define HW_PINCTRL_IRQSTAT2	0xB20
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-power.h b/arch/arm/mach-stmp37xx/include/mach/regs-power.h
new file mode 100644
index 00000000000..0e733d74a22
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-power.h
@@ -0,0 +1,56 @@
+/*
+ * stmp37xx: POWER register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_POWER
+#define _MACH_REGS_POWER
+
+#define REGS_POWER_BASE	(STMP3XXX_REGS_BASE + 0x44000)
+
+#define HW_POWER_CTRL		0x0
+#define BM_POWER_CTRL_CLKGATE	0x40000000
+
+#define HW_POWER_5VCTRL		0x10
+
+#define HW_POWER_MINPWR		0x20
+
+#define HW_POWER_CHARGE		0x30
+
+#define HW_POWER_VDDDCTRL	0x40
+
+#define HW_POWER_VDDACTRL	0x50
+
+#define HW_POWER_VDDIOCTRL	0x60
+#define BM_POWER_VDDIOCTRL_TRG	0x0000001F
+#define BP_POWER_VDDIOCTRL_TRG	0
+
+#define HW_POWER_STS		0xB0
+#define BM_POWER_STS_VBUSVALID	0x00000002
+#define BM_POWER_STS_BVALID	0x00000004
+#define BM_POWER_STS_AVALID	0x00000008
+#define BM_POWER_STS_DC_OK	0x00000100
+
+#define HW_POWER_RESET		0xE0
+
+#define HW_POWER_DEBUG		0xF0
+#define BM_POWER_DEBUG_BVALIDPIOLOCK	0x00000002
+#define BM_POWER_DEBUG_AVALIDPIOLOCK	0x00000004
+#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK	0x00000008
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h
new file mode 100644
index 00000000000..15966a1b62e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h
@@ -0,0 +1,51 @@
+/*
+ * stmp37xx: PWM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PWM_BASE	(STMP3XXX_REGS_BASE + 0x64000)
+
+#define HW_PWM_CTRL		0x0
+#define BM_PWM_CTRL_PWM2_ENABLE	0x00000004
+#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE	0x00000020
+
+#define HW_PWM_ACTIVE0		(0x10 + 0 * 0x20)
+#define HW_PWM_ACTIVE1		(0x10 + 1 * 0x20)
+#define HW_PWM_ACTIVE2		(0x10 + 2 * 0x20)
+#define HW_PWM_ACTIVE3		(0x10 + 3 * 0x20)
+
+#define HW_PWM_ACTIVEn		0x10
+#define BM_PWM_ACTIVEn_ACTIVE	0x0000FFFF
+#define BP_PWM_ACTIVEn_ACTIVE	0
+#define BM_PWM_ACTIVEn_INACTIVE	0xFFFF0000
+#define BP_PWM_ACTIVEn_INACTIVE	16
+
+#define HW_PWM_PERIOD0		(0x20 + 0 * 0x20)
+#define HW_PWM_PERIOD1		(0x20 + 1 * 0x20)
+#define HW_PWM_PERIOD2		(0x20 + 2 * 0x20)
+#define HW_PWM_PERIOD3		(0x20 + 3 * 0x20)
+
+#define HW_PWM_PERIODn		0x20
+#define BM_PWM_PERIODn_PERIOD	0x0000FFFF
+#define BP_PWM_PERIODn_PERIOD	0
+#define BM_PWM_PERIODn_ACTIVE_STATE	0x00030000
+#define BP_PWM_PERIODn_ACTIVE_STATE	16
+#define BM_PWM_PERIODn_INACTIVE_STATE	0x000C0000
+#define BP_PWM_PERIODn_INACTIVE_STATE	18
+#define BM_PWM_PERIODn_CDIV	0x00700000
+#define BP_PWM_PERIODn_CDIV	20
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h
new file mode 100644
index 00000000000..fac40edc38a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h
@@ -0,0 +1,57 @@
+/*
+ * stmp37xx: RTC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_RTC_BASE	(STMP3XXX_REGS_BASE + 0x5C000)
+#define REGS_RTC_PHYS   0x8005C000
+#define REGS_RTC_SIZE   0x2000
+
+#define HW_RTC_CTRL		0x0
+#define BM_RTC_CTRL_ALARM_IRQ_EN	0x00000001
+#define BP_RTC_CTRL_ALARM_IRQ_EN	0
+#define BM_RTC_CTRL_ONEMSEC_IRQ_EN	0x00000002
+#define BM_RTC_CTRL_ALARM_IRQ	0x00000004
+#define BM_RTC_CTRL_ONEMSEC_IRQ	0x00000008
+#define BM_RTC_CTRL_WATCHDOGEN	0x00000010
+
+#define HW_RTC_STAT		0x10
+#define BM_RTC_STAT_NEW_REGS	0x0000FF00
+#define BP_RTC_STAT_NEW_REGS	8
+#define BM_RTC_STAT_STALE_REGS	0x00FF0000
+#define BP_RTC_STAT_STALE_REGS	16
+#define BM_RTC_STAT_RTC_PRESENT	0x80000000
+
+#define HW_RTC_SECONDS		0x30
+
+#define HW_RTC_ALARM		0x40
+
+#define HW_RTC_WATCHDOG		0x50
+
+#define HW_RTC_PERSISTENT0	0x60
+#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN	0x00000002
+#define BM_RTC_PERSISTENT0_ALARM_EN	0x00000004
+#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP	0x00000010
+#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP	0x00000020
+#define BM_RTC_PERSISTENT0_ALARM_WAKE	0x00000080
+#define BM_RTC_PERSISTENT0_SPARE_ANALOG	0xFFFC0000
+#define BP_RTC_PERSISTENT0_SPARE_ANALOG	18
+
+#define HW_RTC_PERSISTENT1	0x70
+
+#define HW_RTC_VERSION		0xD0
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h
new file mode 100644
index 00000000000..cbde891a06c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h
@@ -0,0 +1,101 @@
+/*
+ * stmp37xx: SSP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SSP_BASE	(STMP3XXX_REGS_BASE + 0x10000)
+#define REGS_SSP1_PHYS	0x80010000
+#define REGS_SSP2_PHYS	0x80034000
+#define REGS_SSP_SIZE	0x2000
+
+#define HW_SSP_CTRL0		0x0
+#define BM_SSP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_SSP_CTRL0_XFER_COUNT	0
+#define BM_SSP_CTRL0_ENABLE	0x00010000
+#define BM_SSP_CTRL0_GET_RESP	0x00020000
+#define BM_SSP_CTRL0_LONG_RESP	0x00080000
+#define BM_SSP_CTRL0_WAIT_FOR_CMD	0x00100000
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ	0x00200000
+#define BM_SSP_CTRL0_BUS_WIDTH	0x00C00000
+#define BP_SSP_CTRL0_BUS_WIDTH	22
+#define BM_SSP_CTRL0_DATA_XFER	0x01000000
+#define BM_SSP_CTRL0_READ	0x02000000
+#define BM_SSP_CTRL0_IGNORE_CRC	0x04000000
+#define BM_SSP_CTRL0_LOCK_CS	0x08000000
+#define BM_SSP_CTRL0_RUN	0x20000000
+#define BM_SSP_CTRL0_CLKGATE	0x40000000
+#define BM_SSP_CTRL0_SFTRST	0x80000000
+
+#define HW_SSP_CMD0		0x10
+#define BM_SSP_CMD0_CMD		0x000000FF
+#define BP_SSP_CMD0_CMD		0
+#define BM_SSP_CMD0_BLOCK_COUNT	0x0000FF00
+#define BP_SSP_CMD0_BLOCK_COUNT	8
+#define BM_SSP_CMD0_BLOCK_SIZE	0x000F0000
+#define BP_SSP_CMD0_BLOCK_SIZE	16
+#define BM_SSP_CMD0_APPEND_8CYC	0x00100000
+#define BM_SSP_CMD1_CMD_ARG	0xFFFFFFFF
+#define BP_SSP_CMD1_CMD_ARG	0
+
+#define HW_SSP_TIMING		0x50
+#define BM_SSP_TIMING_CLOCK_RATE	0x000000FF
+#define BP_SSP_TIMING_CLOCK_RATE	0
+#define BM_SSP_TIMING_CLOCK_DIVIDE	0x0000FF00
+#define BP_SSP_TIMING_CLOCK_DIVIDE	8
+#define BM_SSP_TIMING_TIMEOUT	0xFFFF0000
+#define BP_SSP_TIMING_TIMEOUT	16
+
+#define HW_SSP_CTRL1		0x60
+#define BM_SSP_CTRL1_SSP_MODE	0x0000000F
+#define BP_SSP_CTRL1_SSP_MODE	0
+#define BM_SSP_CTRL1_WORD_LENGTH	0x000000F0
+#define BP_SSP_CTRL1_WORD_LENGTH	4
+#define BM_SSP_CTRL1_POLARITY	0x00000200
+#define BM_SSP_CTRL1_PHASE	0x00000400
+#define BM_SSP_CTRL1_DMA_ENABLE	0x00002000
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ	0x00008000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	0x00010000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ	0x00020000
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ	0x00200000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN	0x00400000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ	0x00800000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	0x01000000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ	0x02000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	0x04000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	0x08000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN	0x10000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ	0x20000000
+#define BM_SSP_CTRL1_SDIO_IRQ	0x80000000
+
+#define HW_SSP_DATA		0x70
+
+#define HW_SSP_SDRESP0		0x80
+
+#define HW_SSP_SDRESP1		0x90
+
+#define HW_SSP_SDRESP2		0xA0
+
+#define HW_SSP_SDRESP3		0xB0
+
+#define HW_SSP_STATUS		0xC0
+#define BM_SSP_STATUS_FIFO_EMPTY	0x00000020
+#define BM_SSP_STATUS_TIMEOUT	0x00001000
+#define BM_SSP_STATUS_RESP_TIMEOUT	0x00004000
+#define BM_SSP_STATUS_RESP_ERR	0x00008000
+#define BM_SSP_STATUS_RESP_CRC_ERR	0x00010000
+#define BM_SSP_STATUS_CARD_DETECT	0x10000000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h
new file mode 100644
index 00000000000..4af0f6edfa7
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h
@@ -0,0 +1,49 @@
+/*
+ * stmp37xx: TIMROT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_TIMROT
+#define _MACH_REGS_TIMROT
+
+#define REGS_TIMROT_BASE	(STMP3XXX_REGS_BASE + 0x68000)
+
+#define HW_TIMROT_ROTCTRL	0x0
+#define BM_TIMROT_ROTCTRL_CLKGATE	0x40000000
+#define BM_TIMROT_ROTCTRL_SFTRST	0x80000000
+
+#define HW_TIMROT_TIMCTRL0	(0x20 + 0 * 0x20)
+#define HW_TIMROT_TIMCTRL1	(0x20 + 1 * 0x20)
+#define HW_TIMROT_TIMCTRL2	(0x20 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCTRLn	0x20
+#define BM_TIMROT_TIMCTRLn_SELECT	0x0000000F
+#define BP_TIMROT_TIMCTRLn_SELECT	0
+#define BM_TIMROT_TIMCTRLn_PRESCALE	0x00000030
+#define BP_TIMROT_TIMCTRLn_PRESCALE	4
+#define BM_TIMROT_TIMCTRLn_RELOAD	0x00000040
+#define BM_TIMROT_TIMCTRLn_UPDATE	0x00000080
+#define BM_TIMROT_TIMCTRLn_IRQ_EN	0x00004000
+#define BM_TIMROT_TIMCTRLn_IRQ	0x00008000
+
+#define HW_TIMROT_TIMCOUNT0	(0x30 + 0 * 0x20)
+#define HW_TIMROT_TIMCOUNT1	(0x30 + 1 * 0x20)
+#define HW_TIMROT_TIMCOUNT2	(0x30 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCOUNTn	0x30
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h
new file mode 100644
index 00000000000..0594275d860
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h
@@ -0,0 +1,85 @@
+/*
+ * stmp37xx: UARTAPP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTAPP_BASE	(STMP3XXX_REGS_BASE + 0x6C000)
+#define REGS_UARTAPP1_PHYS	0x8006C000
+#define REGS_UARTAPP_SIZE	0x2000
+
+#define HW_UARTAPP_CTRL0	0x0
+#define BM_UARTAPP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL0_XFER_COUNT	0
+#define BM_UARTAPP_CTRL0_RXTIMEOUT	0x07FF0000
+#define BP_UARTAPP_CTRL0_RXTIMEOUT	16
+#define BM_UARTAPP_CTRL0_RXTO_ENABLE	0x08000000
+#define BM_UARTAPP_CTRL0_RUN	0x20000000
+#define BM_UARTAPP_CTRL0_SFTRST	0x80000000
+#define BM_UARTAPP_CTRL1_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL1_XFER_COUNT	0
+#define BM_UARTAPP_CTRL1_RUN	0x10000000
+
+#define HW_UARTAPP_CTRL2	0x20
+#define BM_UARTAPP_CTRL2_UARTEN	0x00000001
+#define BP_UARTAPP_CTRL2_UARTEN	0
+#define BM_UARTAPP_CTRL2_TXE	0x00000100
+#define BM_UARTAPP_CTRL2_RXE	0x00000200
+#define BM_UARTAPP_CTRL2_RTS	0x00000800
+#define BM_UARTAPP_CTRL2_RTSEN	0x00004000
+#define BM_UARTAPP_CTRL2_CTSEN	0x00008000
+#define BM_UARTAPP_CTRL2_RXDMAE	0x01000000
+#define BM_UARTAPP_CTRL2_TXDMAE	0x02000000
+#define BM_UARTAPP_CTRL2_DMAONERR	0x04000000
+
+#define HW_UARTAPP_LINECTRL	0x30
+#define BM_UARTAPP_LINECTRL_BRK	0x00000001
+#define BP_UARTAPP_LINECTRL_BRK	0
+#define BM_UARTAPP_LINECTRL_PEN	0x00000002
+#define BM_UARTAPP_LINECTRL_EPS	0x00000004
+#define BM_UARTAPP_LINECTRL_STP2	0x00000008
+#define BM_UARTAPP_LINECTRL_FEN	0x00000010
+#define BM_UARTAPP_LINECTRL_WLEN	0x00000060
+#define BP_UARTAPP_LINECTRL_WLEN	5
+#define BM_UARTAPP_LINECTRL_SPS	0x00000080
+#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC	0x00003F00
+#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC	8
+#define BM_UARTAPP_LINECTRL_BAUD_DIVINT	0xFFFF0000
+#define BP_UARTAPP_LINECTRL_BAUD_DIVINT	16
+
+#define HW_UARTAPP_INTR		0x50
+#define BM_UARTAPP_INTR_CTSMIS	0x00000002
+#define BM_UARTAPP_INTR_RTIS	0x00000040
+#define BM_UARTAPP_INTR_CTSMIEN	0x00020000
+#define BM_UARTAPP_INTR_RXIEN	0x00100000
+#define BM_UARTAPP_INTR_RTIEN	0x00400000
+
+#define HW_UARTAPP_DATA		0x60
+
+#define HW_UARTAPP_STAT		0x70
+#define BM_UARTAPP_STAT_RXCOUNT	0x0000FFFF
+#define BP_UARTAPP_STAT_RXCOUNT	0
+#define BM_UARTAPP_STAT_FERR	0x00010000
+#define BM_UARTAPP_STAT_PERR	0x00020000
+#define BM_UARTAPP_STAT_BERR	0x00040000
+#define BM_UARTAPP_STAT_OERR	0x00080000
+#define BM_UARTAPP_STAT_RXFE	0x01000000
+#define BM_UARTAPP_STAT_TXFF	0x02000000
+#define BM_UARTAPP_STAT_TXFE	0x08000000
+#define BM_UARTAPP_STAT_CTS	0x10000000
+
+#define HW_UARTAPP_VERSION	0x90
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h
new file mode 100644
index 00000000000..b810deb552a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h
@@ -0,0 +1,268 @@
+/*
+ * stmp378x: UARTDBG register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTDBG_BASE	(STMP3XXX_REGS_BASE + 0x70000)
+#define REGS_UARTDBG_PHYS	0x80070000
+#define REGS_UARTDBG_SIZE	0x2000
+
+#define HW_UARTDBGDR 0x00000000
+#define BP_UARTDBGDR_UNAVAILABLE      16
+#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
+#define BP_UARTDBGDR_RESERVED      12
+#define BM_UARTDBGDR_RESERVED 0x0000F000
+#define BF_UARTDBGDR_RESERVED(v)  \
+	(((v) << 12) & BM_UARTDBGDR_RESERVED)
+#define BM_UARTDBGDR_OE 0x00000800
+#define BM_UARTDBGDR_BE 0x00000400
+#define BM_UARTDBGDR_PE 0x00000200
+#define BM_UARTDBGDR_FE 0x00000100
+#define BP_UARTDBGDR_DATA      0
+#define BM_UARTDBGDR_DATA 0x000000FF
+#define BF_UARTDBGDR_DATA(v)  \
+	(((v) << 0) & BM_UARTDBGDR_DATA)
+#define HW_UARTDBGRSR_ECR 0x00000004
+#define BP_UARTDBGRSR_ECR_UNAVAILABLE      8
+#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
+#define BP_UARTDBGRSR_ECR_EC      4
+#define BM_UARTDBGRSR_ECR_EC 0x000000F0
+#define BF_UARTDBGRSR_ECR_EC(v)  \
+	(((v) << 4) & BM_UARTDBGRSR_ECR_EC)
+#define BM_UARTDBGRSR_ECR_OE 0x00000008
+#define BM_UARTDBGRSR_ECR_BE 0x00000004
+#define BM_UARTDBGRSR_ECR_PE 0x00000002
+#define BM_UARTDBGRSR_ECR_FE 0x00000001
+#define HW_UARTDBGFR 0x00000018
+#define BP_UARTDBGFR_UNAVAILABLE      16
+#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGFR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
+#define BP_UARTDBGFR_RESERVED      9
+#define BM_UARTDBGFR_RESERVED 0x0000FE00
+#define BF_UARTDBGFR_RESERVED(v)  \
+	(((v) << 9) & BM_UARTDBGFR_RESERVED)
+#define BM_UARTDBGFR_RI 0x00000100
+#define BM_UARTDBGFR_TXFE 0x00000080
+#define BM_UARTDBGFR_RXFF 0x00000040
+#define BM_UARTDBGFR_TXFF 0x00000020
+#define BM_UARTDBGFR_RXFE 0x00000010
+#define BM_UARTDBGFR_BUSY 0x00000008
+#define BM_UARTDBGFR_DCD 0x00000004
+#define BM_UARTDBGFR_DSR 0x00000002
+#define BM_UARTDBGFR_CTS 0x00000001
+#define HW_UARTDBGILPR 0x00000020
+#define BP_UARTDBGILPR_UNAVAILABLE      8
+#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGILPR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
+#define BP_UARTDBGILPR_ILPDVSR      0
+#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
+#define BF_UARTDBGILPR_ILPDVSR(v)  \
+	(((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
+#define HW_UARTDBGIBRD 0x00000024
+#define BP_UARTDBGIBRD_UNAVAILABLE      16
+#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
+#define BP_UARTDBGIBRD_BAUD_DIVINT      0
+#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
+#define BF_UARTDBGIBRD_BAUD_DIVINT(v)  \
+	(((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
+#define HW_UARTDBGFBRD 0x00000028
+#define BP_UARTDBGFBRD_UNAVAILABLE      8
+#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
+#define BP_UARTDBGFBRD_RESERVED      6
+#define BM_UARTDBGFBRD_RESERVED 0x000000C0
+#define BF_UARTDBGFBRD_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGFBRD_RESERVED)
+#define BP_UARTDBGFBRD_BAUD_DIVFRAC      0
+#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
+#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v)  \
+	(((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
+#define HW_UARTDBGLCR_H 0x0000002c
+#define BP_UARTDBGLCR_H_UNAVAILABLE      16
+#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
+#define BP_UARTDBGLCR_H_RESERVED      8
+#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
+#define BF_UARTDBGLCR_H_RESERVED(v)  \
+	(((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
+#define BM_UARTDBGLCR_H_SPS 0x00000080
+#define BP_UARTDBGLCR_H_WLEN      5
+#define BM_UARTDBGLCR_H_WLEN 0x00000060
+#define BF_UARTDBGLCR_H_WLEN(v)  \
+	(((v) << 5) & BM_UARTDBGLCR_H_WLEN)
+#define BM_UARTDBGLCR_H_FEN 0x00000010
+#define BM_UARTDBGLCR_H_STP2 0x00000008
+#define BM_UARTDBGLCR_H_EPS 0x00000004
+#define BM_UARTDBGLCR_H_PEN 0x00000002
+#define BM_UARTDBGLCR_H_BRK 0x00000001
+#define HW_UARTDBGCR 0x00000030
+#define BP_UARTDBGCR_UNAVAILABLE      16
+#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGCR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
+#define BM_UARTDBGCR_CTSEN 0x00008000
+#define BM_UARTDBGCR_RTSEN 0x00004000
+#define BM_UARTDBGCR_OUT2 0x00002000
+#define BM_UARTDBGCR_OUT1 0x00001000
+#define BM_UARTDBGCR_RTS 0x00000800
+#define BM_UARTDBGCR_DTR 0x00000400
+#define BM_UARTDBGCR_RXE 0x00000200
+#define BM_UARTDBGCR_TXE 0x00000100
+#define BM_UARTDBGCR_LBE 0x00000080
+#define BP_UARTDBGCR_RESERVED      3
+#define BM_UARTDBGCR_RESERVED 0x00000078
+#define BF_UARTDBGCR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGCR_RESERVED)
+#define BM_UARTDBGCR_SIRLP 0x00000004
+#define BM_UARTDBGCR_SIREN 0x00000002
+#define BM_UARTDBGCR_UARTEN 0x00000001
+#define HW_UARTDBGIFLS 0x00000034
+#define BP_UARTDBGIFLS_UNAVAILABLE      16
+#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
+#define BP_UARTDBGIFLS_RESERVED      6
+#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
+#define BF_UARTDBGIFLS_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGIFLS_RESERVED)
+#define BP_UARTDBGIFLS_RXIFLSEL      3
+#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
+#define BF_UARTDBGIFLS_RXIFLSEL(v)  \
+	(((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
+#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY      0x0
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7       0x7
+#define BP_UARTDBGIFLS_TXIFLSEL      0
+#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
+#define BF_UARTDBGIFLS_TXIFLSEL(v)  \
+	(((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
+#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY	  0x0
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7       0x7
+#define HW_UARTDBGIMSC 0x00000038
+#define BP_UARTDBGIMSC_UNAVAILABLE      16
+#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
+#define BP_UARTDBGIMSC_RESERVED      11
+#define BM_UARTDBGIMSC_RESERVED 0x0000F800
+#define BF_UARTDBGIMSC_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGIMSC_RESERVED)
+#define BM_UARTDBGIMSC_OEIM 0x00000400
+#define BM_UARTDBGIMSC_BEIM 0x00000200
+#define BM_UARTDBGIMSC_PEIM 0x00000100
+#define BM_UARTDBGIMSC_FEIM 0x00000080
+#define BM_UARTDBGIMSC_RTIM 0x00000040
+#define BM_UARTDBGIMSC_TXIM 0x00000020
+#define BM_UARTDBGIMSC_RXIM 0x00000010
+#define BM_UARTDBGIMSC_DSRMIM 0x00000008
+#define BM_UARTDBGIMSC_DCDMIM 0x00000004
+#define BM_UARTDBGIMSC_CTSMIM 0x00000002
+#define BM_UARTDBGIMSC_RIMIM 0x00000001
+#define HW_UARTDBGRIS 0x0000003c
+#define BP_UARTDBGRIS_UNAVAILABLE      16
+#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGRIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
+#define BP_UARTDBGRIS_RESERVED      11
+#define BM_UARTDBGRIS_RESERVED 0x0000F800
+#define BF_UARTDBGRIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGRIS_RESERVED)
+#define BM_UARTDBGRIS_OERIS 0x00000400
+#define BM_UARTDBGRIS_BERIS 0x00000200
+#define BM_UARTDBGRIS_PERIS 0x00000100
+#define BM_UARTDBGRIS_FERIS 0x00000080
+#define BM_UARTDBGRIS_RTRIS 0x00000040
+#define BM_UARTDBGRIS_TXRIS 0x00000020
+#define BM_UARTDBGRIS_RXRIS 0x00000010
+#define BM_UARTDBGRIS_DSRRMIS 0x00000008
+#define BM_UARTDBGRIS_DCDRMIS 0x00000004
+#define BM_UARTDBGRIS_CTSRMIS 0x00000002
+#define BM_UARTDBGRIS_RIRMIS 0x00000001
+#define HW_UARTDBGMIS 0x00000040
+#define BP_UARTDBGMIS_UNAVAILABLE      16
+#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGMIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
+#define BP_UARTDBGMIS_RESERVED      11
+#define BM_UARTDBGMIS_RESERVED 0x0000F800
+#define BF_UARTDBGMIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGMIS_RESERVED)
+#define BM_UARTDBGMIS_OEMIS 0x00000400
+#define BM_UARTDBGMIS_BEMIS 0x00000200
+#define BM_UARTDBGMIS_PEMIS 0x00000100
+#define BM_UARTDBGMIS_FEMIS 0x00000080
+#define BM_UARTDBGMIS_RTMIS 0x00000040
+#define BM_UARTDBGMIS_TXMIS 0x00000020
+#define BM_UARTDBGMIS_RXMIS 0x00000010
+#define BM_UARTDBGMIS_DSRMMIS 0x00000008
+#define BM_UARTDBGMIS_DCDMMIS 0x00000004
+#define BM_UARTDBGMIS_CTSMMIS 0x00000002
+#define BM_UARTDBGMIS_RIMMIS 0x00000001
+#define HW_UARTDBGICR 0x00000044
+#define BP_UARTDBGICR_UNAVAILABLE      16
+#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGICR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
+#define BP_UARTDBGICR_RESERVED      11
+#define BM_UARTDBGICR_RESERVED 0x0000F800
+#define BF_UARTDBGICR_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGICR_RESERVED)
+#define BM_UARTDBGICR_OEIC 0x00000400
+#define BM_UARTDBGICR_BEIC 0x00000200
+#define BM_UARTDBGICR_PEIC 0x00000100
+#define BM_UARTDBGICR_FEIC 0x00000080
+#define BM_UARTDBGICR_RTIC 0x00000040
+#define BM_UARTDBGICR_TXIC 0x00000020
+#define BM_UARTDBGICR_RXIC 0x00000010
+#define BM_UARTDBGICR_DSRMIC 0x00000008
+#define BM_UARTDBGICR_DCDMIC 0x00000004
+#define BM_UARTDBGICR_CTSMIC 0x00000002
+#define BM_UARTDBGICR_RIMIC 0x00000001
+#define HW_UARTDBGDMACR 0x00000048
+#define BP_UARTDBGDMACR_UNAVAILABLE      16
+#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
+#define BP_UARTDBGDMACR_RESERVED      3
+#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
+#define BF_UARTDBGDMACR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGDMACR_RESERVED)
+#define BM_UARTDBGDMACR_DMAONERR 0x00000004
+#define BM_UARTDBGDMACR_TXDMAE 0x00000002
+#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h
index 9e197ae4590..9145e22df32 100644
--- a/arch/arm/mach-imx/include/mach/io.h
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h
@@ -1,7 +1,8 @@
 /*
- *  arch/arm/mach-imxads/include/mach/io.h
+ * stmp37xx: USBCTL register definitions
  *
- *  Copyright (C) 1999 ARM Limited
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,14 +16,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#endif
+#define REGS_USBCTL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTL_PHYS	0x80000
diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h
index e22ba789546..1a2ae9cbdfe 100644
--- a/arch/arm/mach-imx/include/mach/timex.h
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h
@@ -1,7 +1,8 @@
 /*
- *  linux/include/asm-arm/imx/timex.h
+ * stmp37xx: USBCTRL register definitions
  *
- *  Copyright (C) 1999 ARM Limited
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,12 +16,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		(16000000)
-
-#endif
+#define REGS_USBCTRL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTRL_PHYS	0x80080000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h
new file mode 100644
index 00000000000..b7fce0fbc56
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h
@@ -0,0 +1,37 @@
+/*
+ * stmp37xx: USBPHY register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBPHY_BASE	(STMP3XXX_REGS_BASE + 0x7C000)
+
+#define HW_USBPHY_PWD		0x0
+
+#define HW_USBPHY_CTRL		0x30
+#define BM_USBPHY_CTRL_ENHSPRECHARGEXMIT	0x00000001
+#define BP_USBPHY_CTRL_ENHSPRECHARGEXMIT	0
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	0x00000002
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT	0x00000010
+#define BM_USBPHY_CTRL_ENOTGIDDETECT	0x00000080
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN	0x00000800
+#define BM_USBPHY_CTRL_CLKGATE	0x40000000
+#define BM_USBPHY_CTRL_SFTRST	0x80000000
+
+#define HW_USBPHY_STATUS	0x40
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS	0x00000040
+#define BM_USBPHY_STATUS_OTGID_STATUS	0x00000100
diff --git a/arch/arm/mach-stmp37xx/stmp37xx.c b/arch/arm/mach-stmp37xx/stmp37xx.c
new file mode 100644
index 00000000000..8c7d6fb191a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx.c
@@ -0,0 +1,219 @@
+/*
+ * Freescale STMP37XX platform support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/dma.h>
+
+#include <mach/platform.h>
+#include <mach/regs-icoll.h>
+#include <mach/regs-apbh.h>
+#include <mach/regs-apbx.h>
+#include "stmp37xx.h"
+
+/*
+ * IRQ handling
+ */
+static void stmp37xx_ack_irq(unsigned int irq)
+{
+	/* Disable IRQ */
+	stmp3xxx_clearl(0x04 << ((irq % 4) * 8),
+		REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+
+	/* ACK current interrupt */
+	__raw_writel(1, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+
+	/* Barrier */
+	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
+static void stmp37xx_mask_irq(unsigned int irq)
+{
+	/* IRQ disable */
+	stmp3xxx_clearl(0x04 << ((irq % 4) * 8),
+		REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+}
+
+static void stmp37xx_unmask_irq(unsigned int irq)
+{
+	/* IRQ enable */
+	stmp3xxx_setl(0x04 << ((irq % 4) * 8),
+		REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+}
+
+static struct irq_chip stmp37xx_chip = {
+	.ack	= stmp37xx_ack_irq,
+	.mask	= stmp37xx_mask_irq,
+	.unmask = stmp37xx_unmask_irq,
+};
+
+void __init stmp37xx_init_irq(void)
+{
+	stmp3xxx_init_irq(&stmp37xx_chip);
+}
+
+/*
+ * DMA interrupt handling
+ */
+void stmp3xxx_arch_dma_enable_interrupt(int channel)
+{
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
+			REGS_APBH_BASE + HW_APBH_CTRL1);
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
+			REGS_APBX_BASE + HW_APBX_CTRL1);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
+
+void stmp3xxx_arch_dma_clear_interrupt(int channel)
+{
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
+				REGS_APBH_BASE + HW_APBH_CTRL1);
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
+				REGS_APBX_BASE + HW_APBX_CTRL1);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
+
+int stmp3xxx_arch_dma_is_interrupt(int channel)
+{
+	int r = 0;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+	}
+	return r;
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
+
+void stmp3xxx_arch_dma_reset_channel(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		/* Reset channel and wait for it to complete */
+		stmp3xxx_setl(chbit << BP_APBH_CTRL0_RESET_CHANNEL,
+			REGS_APBH_BASE + HW_APBH_CTRL0);
+		while (__raw_readl(REGS_APBH_BASE + HW_APBH_CTRL0) &
+		       (chbit << BP_APBH_CTRL0_RESET_CHANNEL))
+				cpu_relax();
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(chbit << BP_APBX_CTRL0_RESET_CHANNEL,
+			REGS_APBX_BASE + HW_APBX_CTRL0);
+		while (__raw_readl(REGS_APBX_BASE + HW_APBX_CTRL0) &
+		       (chbit << BP_APBX_CTRL0_RESET_CHANNEL))
+				cpu_relax();
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
+
+void stmp3xxx_arch_dma_freeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
+
+void stmp3xxx_arch_dma_unfreeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
+
+/*
+ * The registers are all very closely mapped, so we might as well map them all
+ * with a single mapping
+ *
+ * Logical      Physical
+ * f0000000	80000000	On-chip registers
+ * f1000000	00000000	32k on-chip SRAM
+ */
+static struct map_desc stmp37xx_io_desc[] __initdata = {
+	{
+		.virtual	= (u32)STMP3XXX_REGS_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_REGS_PHBASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= (u32)STMP3XXX_OCRAM_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
+		.length		= STMP3XXX_OCRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init stmp37xx_map_io(void)
+{
+	iotable_init(stmp37xx_io_desc, ARRAY_SIZE(stmp37xx_io_desc));
+}
diff --git a/arch/arm/mach-stmp37xx/stmp37xx.h b/arch/arm/mach-stmp37xx/stmp37xx.h
new file mode 100644
index 00000000000..0b75fb796a6
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx.h
@@ -0,0 +1,24 @@
+/*
+ * Freescale STMP37XX/STMP378X internal functions and data declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __MACH_STMP37XX_H
+#define __MACH_STMP37XX_H
+
+void stmp37xx_map_io(void);
+void stmp37xx_init_irq(void);
+
+#endif /* __MACH_STMP37XX_H */
diff --git a/arch/arm/mach-stmp37xx/stmp37xx_devb.c b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
new file mode 100644
index 00000000000..394f21ab59e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
@@ -0,0 +1,101 @@
+/*
+ * Freescale STMP37XX development board support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include "stmp37xx.h"
+
+/*
+ * List of STMP37xx development board specific devices
+ */
+static struct platform_device *stmp37xx_devb_devices[] = {
+	&stmp3xxx_dbguart,
+	&stmp3xxx_appuart,
+};
+
+static struct pin_desc dbguart_pins_0[] = {
+	{ PINID_PWM0, PIN_FUN3, },
+	{ PINID_PWM1, PIN_FUN3, },
+};
+
+struct pin_desc appuart_pins_0[] = {
+	{ PINID_UART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_UART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_UART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_UART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+};
+
+static struct pin_group appuart_pins[] = {
+	[0] = {
+		.pins		= appuart_pins_0,
+		.nr_pins	= ARRAY_SIZE(appuart_pins_0),
+	},
+	/* 37xx has the only app uart */
+};
+
+static struct pin_group dbguart_pins[] = {
+	[0] = {
+		.pins		= dbguart_pins_0,
+		.nr_pins	= ARRAY_SIZE(dbguart_pins_0),
+	},
+};
+
+static int dbguart_pins_control(int id, int request)
+{
+	int r = 0;
+
+	if (request)
+		r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
+	else
+		stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
+	return r;
+}
+
+
+static void __init stmp37xx_devb_init(void)
+{
+	stmp3xxx_pinmux_init(NR_REAL_IRQS);
+
+	/* Init STMP3xxx platform */
+	stmp3xxx_init();
+
+	stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
+	stmp3xxx_appuart.dev.platform_data = appuart_pins;
+
+	/* Add STMP37xx development board devices */
+	platform_add_devices(stmp37xx_devb_devices,
+			ARRAY_SIZE(stmp37xx_devb_devices));
+}
+
+MACHINE_START(STMP37XX, "STMP37XX")
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x40000100,
+	.map_io		= stmp37xx_map_io,
+	.init_irq	= stmp37xx_init_irq,
+	.timer		= &stmp3xxx_timer,
+	.init_machine	= stmp37xx_devb_init,
+MACHINE_END
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
new file mode 100644
index 00000000000..337b9aabce4
--- /dev/null
+++ b/arch/arm/mach-u300/Kconfig
@@ -0,0 +1,105 @@
+if ARCH_U300
+
+menu "ST-Ericsson AB U300/U330/U335/U365 Platform"
+
+comment "ST-Ericsson Mobile Platform Products"
+
+config MACH_U300
+	bool "U300"
+
+comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
+
+choice
+	prompt "U300/U330/U335/U365 system type"
+	default MACH_U300_BS2X
+	---help---
+	You need to select the target system, i.e. the
+	U300/U330/U335/U365 board that you want to compile your kernel
+	for.
+
+config MACH_U300_BS2X
+	bool "S26/S26/B25/B26 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S26/S25 test products. (Also works on
+		B26/B25 big boards.)
+
+config MACH_U300_BS330
+	bool "S330/B330 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S330/B330 test products.
+
+config MACH_U300_BS335
+	bool "S335/B335 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S335/B335 test products.
+
+config MACH_U300_BS365
+	bool "S365/B365 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S365/B365 test products.
+
+endchoice
+
+choice
+	prompt "Memory configuration"
+	default MACH_U300_SINGLE_RAM
+	---help---
+	You have to config the kernel according to the physical memory
+	configuration.
+
+config MACH_U300_SINGLE_RAM
+	bool "Single RAM"
+	help
+		Select this if you want support for Single RAM phones.
+
+config MACH_U300_DUAL_RAM
+	bool "Dual RAM"
+	help
+		Select this if you want support for Dual RAM phones.
+		This is two RAM memorys on different EMIFs.
+endchoice
+
+config U300_DEBUG
+	bool "Debug support for U300"
+	depends on PM
+	help
+		Debug support for U300 in sysfs, procfs etc.
+
+config MACH_U300_SEMI_IS_SHARED
+	bool "The SEMI is used by both the access and application side"
+	depends on MACH_U300
+	help
+		This makes it possible to use the SEMI (Shared External
+		Memory Interface) from both from access and application
+		side.
+
+comment "All the settings below must match the bootloader's settings"
+
+config MACH_U300_ACCESS_MEM_SIZE
+       int "Access CPU memory allocation"
+       range 7 25
+       depends on MACH_U300_SINGLE_RAM
+       default 13
+       help
+		How much memory in MiB that the Access side CPU has allocated
+
+config MACH_U300_2MB_ALIGNMENT_FIX
+       bool "2MiB alignment fix"
+       depends on MACH_U300_SINGLE_RAM
+       default y
+       help
+		If yes and the Access side CPU has allocated an odd size in
+		MiB, this fix gives you one MiB extra that would otherwise be
+		lost due to Linux 2 MiB alignment policy.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
new file mode 100644
index 00000000000..24950e0df4b
--- /dev/null
+++ b/arch/arm/mach-u300/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel, U300 machine.
+#
+
+obj-y		:= core.o clock.o timer.o gpio.o padmux.o
+obj-m		:=
+obj-n		:=
+obj-		:=
+
+obj-$(CONFIG_ARCH_U300)	          += u300.o
+obj-$(CONFIG_MMC)                 += mmc.o
diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot
new file mode 100644
index 00000000000..6fbfc6ea2d3
--- /dev/null
+++ b/arch/arm/mach-u300/Makefile.boot
@@ -0,0 +1,15 @@
+# Note: the following conditions must always be true:
+#   ZRELADDR == virt_to_phys(TEXTADDR)
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+ifdef CONFIG_MACH_U300_SINGLE_RAM
+     zreladdr-y	:= 0x28E08000
+  params_phys-y	:= 0x28E00100
+else
+     zreladdr-y	:= 0x48008000
+  params_phys-y	:= 0x48000100
+endif
+
+# This isn't used.
+#initrd_phys-y	:= 0x29800000
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
new file mode 100644
index 00000000000..5cd04d6751b
--- /dev/null
+++ b/arch/arm/mach-u300/clock.c
@@ -0,0 +1,1487 @@
+/*
+ *
+ * arch/arm/mach-u300/clock.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Define clocks in the app platform.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+#include "clock.h"
+
+/*
+ * TODO:
+ * - move all handling of the CCR register into this file and create
+ *   a spinlock for the CCR register
+ * - switch to the clkdevice lookup mechanism that maps clocks to
+ *   device ID:s instead when it becomes available in kernel 2.6.29.
+ * - implement rate get/set for all clocks that need it.
+ */
+
+/*
+ * Syscon clock I/O registers lock so clock requests don't collide
+ * NOTE: this is a local lock only used to lock access to clock and
+ * reset registers in syscon.
+ */
+static DEFINE_SPINLOCK(syscon_clkreg_lock);
+static DEFINE_SPINLOCK(syscon_resetreg_lock);
+
+/*
+ * The clocking hierarchy currently looks like this.
+ * NOTE: the idea is NOT to show how the clocks are routed on the chip!
+ * The ideas is to show dependencies, so a clock higher up in the
+ * hierarchy has to be on in order for another clock to be on. Now,
+ * both CPU and DMA can actually be on top of the hierarchy, and that
+ * is not modeled currently. Instead we have the backbone AMBA bus on
+ * top. This bus cannot be programmed in any way but conceptually it
+ * needs to be active for the bridges and devices to transport data.
+ *
+ * Please be aware that a few clocks are hw controlled, which mean that
+ * the hw itself can turn on/off or change the rate of the clock when
+ * needed!
+ *
+ *  AMBA bus
+ *  |
+ *  +- CPU
+ *  +- NANDIF NAND Flash interface
+ *  +- SEMI Shared Memory interface
+ *  +- ISP Image Signal Processor (U335 only)
+ *  +- CDS (U335 only)
+ *  +- DMA Direct Memory Access Controller
+ *  +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
+ *  +- APEX
+ *  +- VIDEO_ENC AVE2/3 Video Encoder
+ *  +- XGAM Graphics Accelerator Controller
+ *  +- AHB
+ *  |
+ *  +- ahb:0 AHB Bridge
+ *  |  |
+ *  |  +- ahb:1 INTCON Interrupt controller
+ *  |  +- ahb:3 MSPRO  Memory Stick Pro controller
+ *  |  +- ahb:4 EMIF   External Memory interface
+ *  |
+ *  +- fast:0 FAST bridge
+ *  |  |
+ *  |  +- fast:1 MMCSD MMC/SD card reader controller
+ *  |  +- fast:2 I2S0  PCM I2S channel 0 controller
+ *  |  +- fast:3 I2S1  PCM I2S channel 1 controller
+ *  |  +- fast:4 I2C0  I2C channel 0 controller
+ *  |  +- fast:5 I2C1  I2C channel 1 controller
+ *  |  +- fast:6 SPI   SPI controller
+ *  |  +- fast:7 UART1 Secondary UART (U335 only)
+ *  |
+ *  +- slow:0 SLOW bridge
+ *     |
+ *     +- slow:1 SYSCON (not possible to control)
+ *     +- slow:2 WDOG Watchdog
+ *     +- slow:3 UART0 primary UART
+ *     +- slow:4 TIMER_APP Application timer - used in Linux
+ *     +- slow:5 KEYPAD controller
+ *     +- slow:6 GPIO controller
+ *     +- slow:7 RTC controller
+ *     +- slow:8 BT Bus Tracer (not used currently)
+ *     +- slow:9 EH Event Handler (not used currently)
+ *     +- slow:a TIMER_ACC Access style timer (not used currently)
+ *     +- slow:b PPM (U335 only, what is that?)
+ */
+
+/*
+ * Reset control functions. We remember if a block has been
+ * taken out of reset and don't remove the reset assertion again
+ * and vice versa. Currently we only remove resets so the
+ * enablement function is defined out.
+ */
+static void syscon_block_reset_enable(struct clk *clk)
+{
+	u16 val;
+	unsigned long iflags;
+
+	/* Not all blocks support resetting */
+	if (!clk->res_reg || !clk->res_mask)
+		return;
+	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+	val = readw(clk->res_reg);
+	val |= clk->res_mask;
+	writew(val, clk->res_reg);
+	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+	clk->reset = true;
+}
+
+static void syscon_block_reset_disable(struct clk *clk)
+{
+	u16 val;
+	unsigned long iflags;
+
+	/* Not all blocks support resetting */
+	if (!clk->res_reg || !clk->res_mask)
+		return;
+	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+	val = readw(clk->res_reg);
+	val &= ~clk->res_mask;
+	writew(val, clk->res_reg);
+	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+	clk->reset = false;
+}
+
+int __clk_get(struct clk *clk)
+{
+	u16 val;
+
+	/* The MMC and MSPRO clocks need some special set-up */
+	if (!strcmp(clk->name, "MCLK")) {
+		/* Set default MMC clock divisor to 18.9 MHz */
+		writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
+		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+		/* Disable the MMC feedback clock */
+		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+		/* Disable MSPRO frequency */
+		val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+	}
+	if (!strcmp(clk->name, "MSPRO")) {
+		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+		/* Disable the MMC feedback clock */
+		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+		/* Enable MSPRO frequency */
+		val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+	}
+	return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
+
+static void syscon_clk_disable(struct clk *clk)
+{
+	unsigned long iflags;
+
+	/* Don't touch the hardware controlled clocks */
+	if (clk->hw_ctrld)
+		return;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void syscon_clk_enable(struct clk *clk)
+{
+	unsigned long iflags;
+
+	/* Don't touch the hardware controlled clocks */
+	if (clk->hw_ctrld)
+		return;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static u16 syscon_clk_get_rate(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+	return val;
+}
+
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+static void enable_i2s0_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Set I2S0 to use the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void enable_i2s1_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Set I2S1 to use the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void disable_i2s0_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Disable I2S0 use of the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Deactivate VCXO if noone else is using VCXO */
+	if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
+		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void disable_i2s1_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Disable I2S1 use of the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Deactivate VCXO if noone else is using VCXO */
+	if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
+		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
+
+
+static void syscon_clk_rate_set_mclk(unsigned long rate)
+{
+	u16 val;
+	u32 reg;
+	unsigned long iflags;
+
+	switch (rate) {
+	case 18900000:
+		val = 0x0054;
+		break;
+	case 20800000:
+		val = 0x0044;
+		break;
+	case 23100000:
+		val = 0x0043;
+		break;
+	case 26000000:
+		val = 0x0033;
+		break;
+	case 29700000:
+		val = 0x0032;
+		break;
+	case 34700000:
+		val = 0x0022;
+		break;
+	case 41600000:
+		val = 0x0021;
+		break;
+	case 52000000:
+		val = 0x0011;
+		break;
+	case 104000000:
+		val = 0x0000;
+		break;
+	default:
+		printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n",
+		       rate);
+		return;
+	}
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
+		~U300_SYSCON_MMF0R_MASK;
+	writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+void syscon_clk_rate_set_cpuclk(unsigned long rate)
+{
+	u16 val;
+	unsigned long iflags;
+
+	switch (rate) {
+	case 13000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
+		break;
+	case 52000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
+		break;
+	case 104000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
+		break;
+	case 208000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
+		break;
+	default:
+		return;
+	}
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) &
+		~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long iflags;
+
+	spin_lock_irqsave(&clk->lock, iflags);
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		/* some blocks lack clocking registers and cannot be disabled */
+		if (clk->disable)
+			clk->disable(clk);
+		if (likely((u32)clk->parent))
+			clk_disable(clk->parent);
+	}
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+	if (unlikely(!strcmp(clk->name, "I2S0")))
+		disable_i2s0_vcxo();
+	if (unlikely(!strcmp(clk->name, "I2S1")))
+		disable_i2s1_vcxo();
+#endif
+	spin_unlock_irqrestore(&clk->lock, iflags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_enable(struct clk *clk)
+{
+	int ret = 0;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&clk->lock, iflags);
+	if (clk->usecount++ == 0) {
+		if (likely((u32)clk->parent))
+			ret = clk_enable(clk->parent);
+
+		if (unlikely(ret != 0))
+			clk->usecount--;
+		else {
+			/* remove reset line (we never enable reset again) */
+			syscon_block_reset_disable(clk);
+			/* clocks without enable function are always on */
+			if (clk->enable)
+				clk->enable(clk);
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+			if (unlikely(!strcmp(clk->name, "I2S0")))
+				enable_i2s0_vcxo();
+			if (unlikely(!strcmp(clk->name, "I2S1")))
+				enable_i2s1_vcxo();
+#endif
+		}
+	}
+	spin_unlock_irqrestore(&clk->lock, iflags);
+	return ret;
+
+}
+EXPORT_SYMBOL(clk_enable);
+
+/* Returns the clock rate in Hz */
+static unsigned long clk_get_rate_cpuclk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 52000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+		return 104000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 208000000;
+	default:
+		break;
+	}
+	return clk->rate;
+}
+
+static unsigned long clk_get_rate_ahb_clk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 6500000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 26000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 52000000;
+	default:
+		break;
+	}
+	return clk->rate;
+
+}
+
+static unsigned long clk_get_rate_emif_clk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 52000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 104000000;
+	default:
+		break;
+	}
+	return clk->rate;
+
+}
+
+static unsigned long clk_get_rate_xgamclk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 6500000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 26000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 52000000;
+	default:
+		break;
+	}
+
+	return clk->rate;
+}
+
+static unsigned long clk_get_rate_mclk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+		/*
+		 * Here, the 208 MHz PLL gets shut down and the always
+		 * on 13 MHz PLL used for RTC etc kicks into use
+		 * instead.
+		 */
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+	{
+		/*
+		 * This clock is under program control. The register is
+		 * divided in two nybbles, bit 7-4 gives cycles-1 to count
+		 * high, bit 3-0 gives cycles-1 to count low. Distribute
+		 * these with no more than 1 cycle difference between
+		 * low and high and add low and high to get the actual
+		 * divisor. The base PLL is 208 MHz. Writing 0x00 will
+		 * divide by 1 and 1 so the highest frequency possible
+		 * is 104 MHz.
+		 *
+		 * e.g. 0x54 =>
+		 * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
+		 */
+		u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
+			U300_SYSCON_MMF0R_MASK;
+		switch (val) {
+		case 0x0054:
+			return 18900000;
+		case 0x0044:
+			return 20800000;
+		case 0x0043:
+			return 23100000;
+		case 0x0033:
+			return 26000000;
+		case 0x0032:
+			return 29700000;
+		case 0x0022:
+			return 34700000;
+		case 0x0021:
+			return 41600000;
+		case 0x0011:
+			return 52000000;
+		case 0x0000:
+			return 104000000;
+		default:
+			break;
+		}
+	}
+	default:
+		break;
+	}
+
+	return clk->rate;
+}
+
+static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 26000000;
+	default:
+		break;
+	}
+
+	return clk->rate;
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+	else
+		return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
+{
+	if (rate >= 18900000)
+		return 18900000;
+	if (rate >= 20800000)
+		return 20800000;
+	if (rate >= 23100000)
+		return 23100000;
+	if (rate >= 26000000)
+		return 26000000;
+	if (rate >= 29700000)
+		return 29700000;
+	if (rate >= 34700000)
+		return 34700000;
+	if (rate >= 41600000)
+		return 41600000;
+	if (rate >= 52000000)
+		return 52000000;
+	return -EINVAL;
+}
+
+static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
+{
+	if (rate >= 13000000)
+		return 13000000;
+	if (rate >= 52000000)
+		return 52000000;
+	if (rate >= 104000000)
+		return 104000000;
+	if (rate >= 208000000)
+		return 208000000;
+	return -EINVAL;
+}
+
+/*
+ * This adjusts a requested rate to the closest exact rate
+ * a certain clock can provide. For a fixed clock it's
+ * mostly clk->rate.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	/* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */
+	/* Else default to fixed value */
+
+	if (clk->round_rate) {
+		return (long) clk->round_rate(clk, rate);
+	} else {
+		printk(KERN_ERR "clock: Failed to round rate of %s\n",
+		       clk->name);
+	}
+	return (long) clk->rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+static int clk_set_rate_mclk(struct clk *clk, unsigned long rate)
+{
+	syscon_clk_rate_set_mclk(clk_round_rate(clk, rate));
+	return 0;
+}
+
+static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate)
+{
+	syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate));
+	return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	/* TODO: set for EMIFCLK and AHBCLK */
+	/* Else assume the clock is fixed and fail */
+	if (clk->set_rate) {
+		return clk->set_rate(clk, rate);
+	} else {
+		printk(KERN_ERR "clock: Failed to set %s to %ld hz\n",
+		       clk->name, rate);
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * Clock definitions. The clock parents are set to respective
+ * bridge and the clock framework makes sure that the clocks have
+ * parents activated and are brought out of reset when in use.
+ *
+ * Clocks that have hw_ctrld = true are hw controlled, and the hw
+ * can by itself turn these clocks on and off.
+ * So in other words, we don't really have to care about them.
+ */
+
+static struct clk amba_clk = {
+	.name	    = "AMBA",
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = false,
+};
+
+/*
+ * These blocks are connected directly to the AMBA bus
+ * with no bridge.
+ */
+
+static struct clk cpu_clk = {
+	.name	    = "CPU",
+	.parent	    = &amba_clk,
+	.rate	    = 208000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_CPU_RESET_EN,
+	.set_rate   = clk_set_rate_cpuclk,
+	.get_rate   = clk_get_rate_cpuclk,
+	.round_rate = clk_round_rate_cpuclk,
+};
+
+static struct clk nandif_clk = {
+	.name       = "NANDIF",
+	.parent	    = &amba_clk,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_NANDIF_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk semi_clk = {
+	.name       = "SEMI",
+	.parent	    = &amba_clk,
+	.rate       = 0, /* FIXME */
+	/* It is not possible to reset SEMI */
+	.hw_ctrld   = false,
+	.reset	    = false,
+	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk isp_clk = {
+	.name	    = "ISP",
+	.parent	    = &amba_clk,
+	.rate	    = 0, /* FIXME */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_ISP_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk cds_clk = {
+	.name	    = "CDS",
+	.parent	    = &amba_clk,
+	.rate	    = 0, /* FIXME */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_CDS_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+#endif
+
+static struct clk dma_clk = {
+	.name       = "DMA",
+	.parent	    = &amba_clk,
+	.rate       = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_DMAC_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk aaif_clk = {
+	.name       = "AAIF",
+	.parent	    = &amba_clk,
+	.rate       = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_AAIF_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk apex_clk = {
+	.name       = "APEX",
+	.parent	    = &amba_clk,
+	.rate       = 0, /* FIXME */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_APEX_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk video_enc_clk = {
+	.name       = "VIDEO_ENC",
+	.parent	    = &amba_clk,
+	.rate       = 208000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = false,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	/* This has XGAM in the name but refers to the video encoder */
+	.res_mask   = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk xgam_clk = {
+	.name       = "XGAMCLK",
+	.parent	    = &amba_clk,
+	.rate       = 52000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_XGAM_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_XGAM_CLK_EN,
+	.get_rate   = clk_get_rate_xgamclk,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+/* This clock is used to activate the video encoder */
+static struct clk ahb_clk = {
+	.name	    = "AHB",
+	.parent	    = &amba_clk,
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = false, /* This one is set to false due to HW bug */
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_AHB_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_AHB_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_ahb_clk,
+};
+
+
+/*
+ * Clocks on the AHB bridge
+ */
+
+static struct clk ahb_subsys_clk = {
+	.name	    = "AHB_SUBSYS",
+	.parent	    = &amba_clk,
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = false,
+	.clk_val    = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_ahb_clk,
+};
+
+static struct clk intcon_clk = {
+	.name	    = "INTCON",
+	.parent	    = &ahb_subsys_clk,
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
+	/* INTCON can be reset but not clock-gated */
+};
+
+static struct clk mspro_clk = {
+	.name       = "MSPRO",
+	.parent	    = &ahb_subsys_clk,
+	.rate       = 0, /* FIXME */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_MSPRO_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk emif_clk = {
+	.name	    = "EMIF",
+	.parent	    = &ahb_subsys_clk,
+	.rate	    = 104000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_EMIF_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_EMIF_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_emif_clk,
+};
+
+
+/*
+ * Clocks on the FAST bridge
+ */
+static struct clk fast_clk = {
+	.name	    = "FAST_BRIDGE",
+	.parent	    = &amba_clk,
+	.rate	    = 13000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk mmcsd_clk = {
+	.name       = "MCLK",
+	.parent	    = &fast_clk,
+	.rate       = 18900000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_MMC_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_MMC_CLK_EN,
+	.get_rate   = clk_get_rate_mclk,
+	.set_rate   = clk_set_rate_mclk,
+	.round_rate = clk_round_rate_mclk,
+	.disable    = syscon_clk_disable,
+	.enable     = syscon_clk_enable,
+};
+
+static struct clk i2s0_clk = {
+	.name       = "i2s0",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2s1_clk = {
+	.name       = "i2s1",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2c0_clk = {
+	.name       = "I2C0",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_I2C0_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2C0_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2c1_clk = {
+	.name       = "I2C1",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_I2C1_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2C1_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk spi_clk = {
+	.name       = "SPI",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_SPI_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_SPI_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk uart1_clk = {
+	.name	    = "UART1",
+	.parent	    = &fast_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_UART1_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+#endif
+
+
+/*
+ * Clocks on the SLOW bridge
+ */
+static struct clk slow_clk = {
+	.name	    = "SLOW_BRIDGE",
+	.parent	    = &amba_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+/* TODO: implement SYSCON clock? */
+
+static struct clk wdog_clk = {
+	.name	    = "WDOG",
+	.parent	    = &slow_clk,
+	.hw_ctrld   = false,
+	.rate	    = 32768,
+	.reset	    = false,
+	/* This is always on, cannot be enabled/disabled or reset */
+};
+
+/* This one is hardwired to PLL13 */
+static struct clk uart_clk = {
+	.name	    = "UARTCLK",
+	.parent	    = &slow_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_UART_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk keypad_clk = {
+	.name       = "KEYPAD",
+	.parent	    = &slow_clk,
+	.rate       = 32768,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_KEYPAD_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk gpio_clk = {
+	.name       = "GPIO",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_GPIO_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk rtc_clk = {
+	.name	    = "RTC",
+	.parent	    = &slow_clk,
+	.rate	    = 32768,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
+	/* This clock is always on, cannot be enabled/disabled */
+};
+
+static struct clk bustr_clk = {
+	.name       = "BUSTR",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_BTR_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk evhist_clk = {
+	.name       = "EVHIST",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_EH_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk timer_clk = {
+	.name       = "TIMER",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_ACC_TMR_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk app_timer_clk = {
+	.name       = "TIMER_APP",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_APP_TMR_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk ppm_clk = {
+	.name	    = "PPM",
+	.parent	    = &slow_clk,
+	.rate	    = 0, /* FIXME */
+	.hw_ctrld   = true, /* TODO: Look up if it is hw ctrld or not */
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_PPM_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+#endif
+
+#define DEF_LOOKUP(devid, clkref)		\
+	{					\
+	.dev_id = devid,			\
+	.clk = clkref,				\
+	}
+
+/*
+ * Here we only define clocks that are meaningful to
+ * look up through clockdevice.
+ */
+static struct clk_lookup lookups[] = {
+	/* Connected directly to the AMBA bus */
+	DEF_LOOKUP("amba", &amba_clk),
+	DEF_LOOKUP("cpu", &cpu_clk),
+	DEF_LOOKUP("nandif", &nandif_clk),
+	DEF_LOOKUP("semi", &semi_clk),
+#ifdef CONFIG_MACH_U300_BS335
+	DEF_LOOKUP("isp", &isp_clk),
+	DEF_LOOKUP("cds", &cds_clk),
+#endif
+	DEF_LOOKUP("dma", &dma_clk),
+	DEF_LOOKUP("aaif", &aaif_clk),
+	DEF_LOOKUP("apex", &apex_clk),
+	DEF_LOOKUP("video_enc", &video_enc_clk),
+	DEF_LOOKUP("xgam", &xgam_clk),
+	DEF_LOOKUP("ahb", &ahb_clk),
+	/* AHB bridge clocks */
+	DEF_LOOKUP("ahb", &ahb_subsys_clk),
+	DEF_LOOKUP("intcon", &intcon_clk),
+	DEF_LOOKUP("mspro", &mspro_clk),
+	DEF_LOOKUP("pl172", &emif_clk),
+	/* FAST bridge clocks */
+	DEF_LOOKUP("fast", &fast_clk),
+	DEF_LOOKUP("mmci", &mmcsd_clk),
+	/*
+	 * The .0 and .1 identifiers on these comes from the platform device
+	 * .id field and are assigned when the platform devices are registered.
+	 */
+	DEF_LOOKUP("i2s.0", &i2s0_clk),
+	DEF_LOOKUP("i2s.1", &i2s1_clk),
+	DEF_LOOKUP("stddci2c.0", &i2c0_clk),
+	DEF_LOOKUP("stddci2c.1", &i2c1_clk),
+	DEF_LOOKUP("pl022", &spi_clk),
+#ifdef CONFIG_MACH_U300_BS335
+	DEF_LOOKUP("uart1", &uart1_clk),
+#endif
+	/* SLOW bridge clocks */
+	DEF_LOOKUP("slow", &slow_clk),
+	DEF_LOOKUP("wdog", &wdog_clk),
+	DEF_LOOKUP("uart0", &uart_clk),
+	DEF_LOOKUP("apptimer", &app_timer_clk),
+	DEF_LOOKUP("keypad", &keypad_clk),
+	DEF_LOOKUP("u300-gpio", &gpio_clk),
+	DEF_LOOKUP("rtc0", &rtc_clk),
+	DEF_LOOKUP("bustr", &bustr_clk),
+	DEF_LOOKUP("evhist", &evhist_clk),
+	DEF_LOOKUP("timer", &timer_clk),
+#ifdef CONFIG_MACH_U300_BS335
+	DEF_LOOKUP("ppm", &ppm_clk),
+#endif
+};
+
+static void __init clk_register(void)
+{
+	int i;
+
+	/* Register the lookups */
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+}
+
+/*
+ * These are the clocks for cells registered as primecell drivers
+ * on the AMBA bus. These must be on during AMBA device registration
+ * since the bus probe will attempt to read magic configuration
+ * registers for these devices. If they are deactivated these probes
+ * will fail.
+ *
+ *
+ * Please note that on emif, both RAM and NAND is connected in dual
+ * RAM phones. On single RAM phones, ram is on semi and NAND on emif.
+ *
+ */
+void u300_clock_primecells(void)
+{
+	clk_enable(&intcon_clk);
+	clk_enable(&uart_clk);
+#ifdef CONFIG_MACH_U300_BS335
+	clk_enable(&uart1_clk);
+#endif
+	clk_enable(&spi_clk);
+
+	clk_enable(&mmcsd_clk);
+
+}
+EXPORT_SYMBOL(u300_clock_primecells);
+
+void u300_unclock_primecells(void)
+{
+
+	clk_disable(&intcon_clk);
+	clk_disable(&uart_clk);
+#ifdef CONFIG_MACH_U300_BS335
+	clk_disable(&uart1_clk);
+#endif
+	clk_disable(&spi_clk);
+	clk_disable(&mmcsd_clk);
+
+}
+EXPORT_SYMBOL(u300_unclock_primecells);
+
+/*
+ * The interrupt controller is enabled before the clock API is registered.
+ */
+void u300_enable_intcon_clock(void)
+{
+	clk_enable(&intcon_clk);
+}
+EXPORT_SYMBOL(u300_enable_intcon_clock);
+
+/*
+ * The timer is enabled before the clock API is registered.
+ */
+void u300_enable_timer_clock(void)
+{
+	clk_enable(&app_timer_clk);
+}
+EXPORT_SYMBOL(u300_enable_timer_clock);
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+/*
+ * The following makes it possible to view the status (especially
+ * reference count and reset status) for the clocks in the platform
+ * by looking into the special file <debugfs>/u300_clocks
+ */
+
+/* A list of all clocks in the platform */
+static struct clk *clks[] = {
+	/* Top node clock for the AMBA bus */
+	&amba_clk,
+	/* Connected directly to the AMBA bus */
+	&cpu_clk,
+	&nandif_clk,
+	&semi_clk,
+#ifdef CONFIG_MACH_U300_BS335
+	&isp_clk,
+	&cds_clk,
+#endif
+	&dma_clk,
+	&aaif_clk,
+	&apex_clk,
+	&video_enc_clk,
+	&xgam_clk,
+	&ahb_clk,
+
+	/* AHB bridge clocks */
+	&ahb_subsys_clk,
+	&intcon_clk,
+	&mspro_clk,
+	&emif_clk,
+	/* FAST bridge clocks */
+	&fast_clk,
+	&mmcsd_clk,
+	&i2s0_clk,
+	&i2s1_clk,
+	&i2c0_clk,
+	&i2c1_clk,
+	&spi_clk,
+#ifdef CONFIG_MACH_U300_BS335
+	&uart1_clk,
+#endif
+	/* SLOW bridge clocks */
+	&slow_clk,
+	&wdog_clk,
+	&uart_clk,
+	&app_timer_clk,
+	&keypad_clk,
+	&gpio_clk,
+	&rtc_clk,
+	&bustr_clk,
+	&evhist_clk,
+	&timer_clk,
+#ifdef CONFIG_MACH_U300_BS335
+	&ppm_clk,
+#endif
+};
+
+static int u300_clocks_show(struct seq_file *s, void *data)
+{
+	struct clk *clk;
+	int i;
+
+	seq_printf(s, "CLOCK           DEVICE          RESET STATE\t" \
+		   "ACTIVE\tUSERS\tHW CTRL FREQ\n");
+	seq_printf(s, "---------------------------------------------" \
+		   "-----------------------------------------\n");
+	for (i = 0; i < ARRAY_SIZE(clks); i++) {
+		clk = clks[i];
+		if (clk != ERR_PTR(-ENOENT)) {
+			/* Format clock and device name nicely */
+			char cdp[33];
+			int chars;
+
+			chars = snprintf(&cdp[0], 17, "%s", clk->name);
+			while (chars < 16) {
+				cdp[chars] = ' ';
+				chars++;
+			}
+			chars = snprintf(&cdp[16], 17, "%s", clk->dev ?
+					 dev_name(clk->dev) : "N/A");
+			while (chars < 16) {
+				cdp[chars+16] = ' ';
+				chars++;
+			}
+			cdp[32] = '\0';
+			if (clk->get_rate)
+				seq_printf(s,
+					   "%s%s\t%s\t%d\t%s\t%lu Hz\n",
+					   &cdp[0],
+					   clk->reset ?
+					   "ASSERTED" : "RELEASED",
+					   clk->usecount ? "ON" : "OFF",
+					   clk->usecount,
+					   clk->hw_ctrld  ? "YES" : "NO ",
+					   clk->get_rate(clk));
+			else
+				seq_printf(s,
+					   "%s%s\t%s\t%d\t%s\t" \
+					   "(unknown rate)\n",
+					   &cdp[0],
+					   clk->reset ?
+					   "ASSERTED" : "RELEASED",
+					   clk->usecount ? "ON" : "OFF",
+					   clk->usecount,
+					   clk->hw_ctrld  ? "YES" : "NO ");
+		}
+	}
+	return 0;
+}
+
+static int u300_clocks_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u300_clocks_show, NULL);
+}
+
+static const struct file_operations u300_clocks_operations = {
+	.open		= u300_clocks_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void init_clk_read_procfs(void)
+{
+	/* Expose a simple debugfs interface to view all clocks */
+	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
+				   NULL, NULL, &u300_clocks_operations);
+}
+#else
+static inline void init_clk_read_procfs(void)
+{
+}
+#endif
+
+static int __init u300_clock_init(void)
+{
+	u16 val;
+
+	/*
+	 * FIXME: shall all this powermanagement stuff really live here???
+	 */
+
+	/* Set system to run at PLL208, max performance, a known state. */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Wait for the PLL208 to lock if not locked in yet */
+	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+	/* Power management enable */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+	val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+
+	clk_register();
+
+	init_clk_read_procfs();
+
+	/*
+	 * Some of these may be on when we boot the system so make sure they
+	 * are turned OFF.
+	 */
+	syscon_block_reset_enable(&timer_clk);
+	timer_clk.disable(&timer_clk);
+
+	/*
+	 * These shall be turned on by default when we boot the system
+	 * so make sure they are ON. (Adding CPU here is a bit too much.)
+	 * These clocks will be claimed by drivers later.
+	 */
+	syscon_block_reset_disable(&semi_clk);
+	syscon_block_reset_disable(&emif_clk);
+	semi_clk.enable(&semi_clk);
+	emif_clk.enable(&emif_clk);
+
+	return 0;
+}
+/* initialize clocking early to be available later in the boot */
+core_initcall(u300_clock_init);
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
new file mode 100644
index 00000000000..fc6d9ccfe7e
--- /dev/null
+++ b/arch/arm/mach-u300/clock.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-u300/include/mach/clock.h
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Adopted to ST-Ericsson U300 platforms by
+ * Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __MACH_CLOCK_H
+#define __MACH_CLOCK_H
+
+#include <linux/clk.h>
+
+struct clk {
+	struct list_head node;
+	struct module *owner;
+	struct device *dev;
+	const char *name;
+	struct clk *parent;
+
+	spinlock_t lock;
+	unsigned long rate;
+	bool reset;
+	__u16 clk_val;
+	__s8 usecount;
+	__u32 res_reg;
+	__u16 res_mask;
+
+	bool hw_ctrld;
+
+	void (*recalc) (struct clk *);
+	int (*set_rate) (struct clk *, unsigned long);
+	unsigned long (*get_rate) (struct clk *);
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	void (*init) (struct clk *);
+	void (*enable) (struct clk *);
+	void (*disable) (struct clk *);
+};
+
+void u300_clock_primecells(void);
+void u300_unclock_primecells(void);
+void u300_enable_intcon_clock(void);
+void u300_enable_timer_clock(void);
+
+#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
new file mode 100644
index 00000000000..89b3ccf35e1
--- /dev/null
+++ b/arch/arm/mach-u300/core.c
@@ -0,0 +1,649 @@
+/*
+ *
+ * arch/arm/mach-u300/core.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Core platform support, IRQ handling and device definitions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/termios.h>
+#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+#include "clock.h"
+#include "mmc.h"
+
+/*
+ * Static I/O mappings that are needed for booting the U300 platforms. The
+ * only things we need are the areas where we find the timer, syscon and
+ * intcon, since the remaining device drivers will map their own memory
+ * physical to virtual as the need arise.
+ */
+static struct map_desc u300_io_desc[] __initdata = {
+	{
+		.virtual	= U300_SLOW_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= U300_AHB_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
+		.length		= SZ_32K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= U300_FAST_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
+		.length		= SZ_32K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= 0xffff2000, /* TCM memory */
+		.pfn		= __phys_to_pfn(0xffff2000),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	},
+
+	/*
+	 * This overlaps with the IRQ vectors etc at 0xffff0000, so these
+	 * may have to be moved to 0x00000000 in order to use the ROM.
+	 */
+	/*
+	{
+		.virtual	= U300_BOOTROM_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
+		.length		= SZ_64K,
+		.type		= MT_ROM,
+	},
+	*/
+};
+
+void __init u300_map_io(void)
+{
+	iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+}
+
+/*
+ * Declaration of devices found on the U300 board and
+ * their respective memory locations.
+ */
+static struct amba_device uart0_device = {
+	.dev = {
+		.init_name = "uart0", /* Slow device at 0x3000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_UART0_BASE,
+		.end   = U300_UART0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = { IRQ_U300_UART0, NO_IRQ },
+};
+
+/* The U335 have an additional UART1 on the APP CPU */
+#ifdef CONFIG_MACH_U300_BS335
+static struct amba_device uart1_device = {
+	.dev = {
+		.init_name = "uart1", /* Fast device at 0x7000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_UART1_BASE,
+		.end   = U300_UART1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = { IRQ_U300_UART1, NO_IRQ },
+};
+#endif
+
+static struct amba_device pl172_device = {
+	.dev = {
+		.init_name = "pl172", /* AHB device at 0x4000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_EMIF_CFG_BASE,
+		.end   = U300_EMIF_CFG_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+
+/*
+ * Everything within this next ifdef deals with external devices connected to
+ * the APP SPI bus.
+ */
+static struct amba_device pl022_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+		.init_name = "pl022", /* Fast device at 0x6000 offset */
+	},
+	.res = {
+		.start = U300_SPI_BASE,
+		.end   = U300_SPI_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_U300_SPI, NO_IRQ },
+	/*
+	 * This device has a DMA channel but the Linux driver does not use
+	 * it currently.
+	 */
+};
+
+static struct amba_device mmcsd_device = {
+	.dev = {
+		.init_name = "mmci", /* Fast device at 0x1000 offset */
+		.platform_data = NULL, /* Added later */
+	},
+	.res = {
+		.start = U300_MMCSD_BASE,
+		.end   = U300_MMCSD_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
+	/*
+	 * This device has a DMA channel but the Linux driver does not use
+	 * it currently.
+	 */
+};
+
+/*
+ * The order of device declaration may be important, since some devices
+ * have dependencies on other devices being initialized first.
+ */
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+#ifdef CONFIG_MACH_U300_BS335
+	&uart1_device,
+#endif
+	&pl022_device,
+	&pl172_device,
+	&mmcsd_device,
+};
+
+/* Here follows a list of all hw resources that the platform devices
+ * allocate. Note, clock dependencies are not included
+ */
+
+static struct resource gpio_resources[] = {
+	{
+		.start = U300_GPIO_BASE,
+		.end   = (U300_GPIO_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "gpio0",
+		.start = IRQ_U300_GPIO_PORT0,
+		.end   = IRQ_U300_GPIO_PORT0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio1",
+		.start = IRQ_U300_GPIO_PORT1,
+		.end   = IRQ_U300_GPIO_PORT1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio2",
+		.start = IRQ_U300_GPIO_PORT2,
+		.end   = IRQ_U300_GPIO_PORT2,
+		.flags = IORESOURCE_IRQ,
+	},
+#ifdef U300_COH901571_3
+	{
+		.name  = "gpio3",
+		.start = IRQ_U300_GPIO_PORT3,
+		.end   = IRQ_U300_GPIO_PORT3,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio4",
+		.start = IRQ_U300_GPIO_PORT4,
+		.end   = IRQ_U300_GPIO_PORT4,
+		.flags = IORESOURCE_IRQ,
+	},
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.name  = "gpio5",
+		.start = IRQ_U300_GPIO_PORT5,
+		.end   = IRQ_U300_GPIO_PORT5,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio6",
+		.start = IRQ_U300_GPIO_PORT6,
+		.end   = IRQ_U300_GPIO_PORT6,
+		.flags = IORESOURCE_IRQ,
+	},
+#endif /* CONFIG_MACH_U300_BS335 */
+#endif /* U300_COH901571_3 */
+};
+
+static struct resource keypad_resources[] = {
+	{
+		.start = U300_KEYPAD_BASE,
+		.end   = U300_KEYPAD_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "coh901461-press",
+		.start = IRQ_U300_KEYPAD_KEYBF,
+		.end   = IRQ_U300_KEYPAD_KEYBF,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "coh901461-release",
+		.start = IRQ_U300_KEYPAD_KEYBR,
+		.end   = IRQ_U300_KEYPAD_KEYBR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	{
+		.start = U300_RTC_BASE,
+		.end   = U300_RTC_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_RTC,
+		.end   = IRQ_U300_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/*
+ * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
+ * but these are not yet used by the driver.
+ */
+static struct resource fsmc_resources[] = {
+	{
+		.start = U300_NAND_IF_PHYS_BASE,
+		.end   = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct resource i2c0_resources[] = {
+	{
+		.start = U300_I2C0_BASE,
+		.end   = U300_I2C0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_I2C0,
+		.end   = IRQ_U300_I2C0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource i2c1_resources[] = {
+	{
+		.start = U300_I2C1_BASE,
+		.end   = U300_I2C1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_I2C1,
+		.end   = IRQ_U300_I2C1,
+		.flags = IORESOURCE_IRQ,
+	},
+
+};
+
+static struct resource wdog_resources[] = {
+	{
+		.start = U300_WDOG_BASE,
+		.end   = U300_WDOG_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_WDOG,
+		.end   = IRQ_U300_WDOG,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* TODO: These should be protected by suitable #ifdef's */
+static struct resource ave_resources[] = {
+	{
+		.name  = "AVE3e I/O Area",
+		.start = U300_VIDEOENC_BASE,
+		.end   = U300_VIDEOENC_BASE + SZ_512K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "AVE3e IRQ0",
+		.start = IRQ_U300_VIDEO_ENC_0,
+		.end   = IRQ_U300_VIDEO_ENC_0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "AVE3e IRQ1",
+		.start = IRQ_U300_VIDEO_ENC_1,
+		.end   = IRQ_U300_VIDEO_ENC_1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "AVE3e Physmem Area",
+		.start = 0, /* 0 will be remapped to reserved memory */
+		.end   = SZ_1M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/*
+	 * The AVE3e requires two regions of 256MB that it considers
+	 * "invisible". The hardware will not be able to access these
+	 * adresses, so they should never point to system RAM.
+	 */
+	{
+		.name  = "AVE3e Reserved 0",
+		.start = 0xd0000000,
+		.end   = 0xd0000000 + SZ_256M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "AVE3e Reserved 1",
+		.start = 0xe0000000,
+		.end   = 0xe0000000 + SZ_256M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device wdog_device = {
+	.name = "wdog",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(wdog_resources),
+	.resource = wdog_resources,
+};
+
+static struct platform_device i2c0_device = {
+	.name = "stddci2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(i2c0_resources),
+	.resource = i2c0_resources,
+};
+
+static struct platform_device i2c1_device = {
+	.name = "stddci2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(i2c1_resources),
+	.resource = i2c1_resources,
+};
+
+static struct platform_device gpio_device = {
+	.name = "u300-gpio",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(gpio_resources),
+	.resource = gpio_resources,
+};
+
+static struct platform_device keypad_device = {
+	.name = "keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(keypad_resources),
+	.resource = keypad_resources,
+};
+
+static struct platform_device rtc_device = {
+	.name = "rtc0",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(rtc_resources),
+	.resource = rtc_resources,
+};
+
+static struct platform_device fsmc_device = {
+	.name = "nandif",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(fsmc_resources),
+	.resource = fsmc_resources,
+};
+
+static struct platform_device ave_device = {
+	.name = "video_enc",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(ave_resources),
+	.resource = ave_resources,
+};
+
+/*
+ * Notice that AMBA devices are initialized before platform devices.
+ *
+ */
+static struct platform_device *platform_devs[] __initdata = {
+	&i2c0_device,
+	&i2c1_device,
+	&keypad_device,
+	&rtc_device,
+	&gpio_device,
+	&fsmc_device,
+	&wdog_device,
+	&ave_device
+};
+
+
+/*
+ * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
+ * together so some interrupts are connected to the first one and some
+ * to the second one.
+ */
+void __init u300_init_irq(void)
+{
+	u32 mask[2] = {0, 0};
+	int i;
+
+	for (i = 0; i < NR_IRQS; i++)
+		set_bit(i, (unsigned long *) &mask[0]);
+	u300_enable_intcon_clock();
+	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+}
+
+
+/*
+ * U300 platforms peripheral handling
+ */
+struct db_chip {
+	u16 chipid;
+	const char *name;
+};
+
+/*
+ * This is a list of the Digital Baseband chips used in the U300 platform.
+ */
+static struct db_chip db_chips[] __initdata = {
+	{
+		.chipid = 0xb800,
+		.name = "DB3000",
+	},
+	{
+		.chipid = 0xc000,
+		.name = "DB3100",
+	},
+	{
+		.chipid = 0xc800,
+		.name = "DB3150",
+	},
+	{
+		.chipid = 0xd800,
+		.name = "DB3200",
+	},
+	{
+		.chipid = 0xe000,
+		.name = "DB3250",
+	},
+	{
+		.chipid = 0xe800,
+		.name = "DB3210",
+	},
+	{
+		.chipid = 0xf000,
+		.name = "DB3350 P1x",
+	},
+	{
+		.chipid = 0xf100,
+		.name = "DB3350 P2x",
+	},
+	{
+		.chipid = 0x0000, /* List terminator */
+		.name = NULL,
+	}
+};
+
+static void u300_init_check_chip(void)
+{
+
+	u16 val;
+	struct db_chip *chip;
+	const char *chipname;
+	const char unknown[] = "UNKNOWN";
+
+	/* Read out and print chip ID */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
+	/* This is in funky bigendian order... */
+	val = (val & 0xFFU) << 8 | (val >> 8);
+	chip = db_chips;
+	chipname = unknown;
+
+	for ( ; chip->chipid; chip++) {
+		if (chip->chipid == (val & 0xFF00U)) {
+			chipname = chip->name;
+			break;
+		}
+	}
+	printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
+	       "(chip ID 0x%04x)\n", chipname, val);
+
+#ifdef CONFIG_MACH_U300_BS26
+	if ((val & 0xFF00U) != 0xc800) {
+		printk(KERN_ERR "Platform configured for BS25/BS26 " \
+		       "with DB3150 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS330
+	if ((val & 0xFF00U) != 0xd800) {
+		printk(KERN_ERR "Platform configured for BS330 " \
+		       "with DB3200 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+	if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
+		printk(KERN_ERR "Platform configured for BS365 " \
+		       " with DB3350 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+	if ((val & 0xFF00U) != 0xe800) {
+		printk(KERN_ERR "Platform configured for BS365 " \
+		       "with DB3210 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+
+
+}
+
+/*
+ * Some devices and their resources require reserved physical memory from
+ * the end of the available RAM. This function traverses the list of devices
+ * and assigns actual adresses to these.
+ */
+static void __init u300_assign_physmem(void)
+{
+	unsigned long curr_start = __pa(high_memory);
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
+		for (j = 0; j < platform_devs[i]->num_resources; j++) {
+			struct resource *const res =
+			  &platform_devs[i]->resource[j];
+
+			if (IORESOURCE_MEM == res->flags &&
+				     0 == res->start) {
+				res->start  = curr_start;
+				res->end   += curr_start;
+				curr_start += (res->end - res->start + 1);
+
+				printk(KERN_INFO "core.c: Mapping RAM " \
+				       "%#x-%#x to device %s:%s\n",
+					res->start, res->end,
+				       platform_devs[i]->name, res->name);
+			}
+		}
+	}
+}
+
+void __init u300_init_devices(void)
+{
+	int i;
+	u16 val;
+
+	/* Check what platform we run and print some status information */
+	u300_init_check_chip();
+
+	/* Set system to run at PLL208, max performance, a known state. */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Wait for the PLL208 to lock if not locked in yet */
+	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+	/* Register the AMBA devices in the AMBA bus abstraction layer */
+	u300_clock_primecells();
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+	u300_unclock_primecells();
+
+	u300_assign_physmem();
+
+	/* Register the platform devices */
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
+	/*
+	 * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
+	 * both subsystems are requesting this mode.
+	 * If we not share the Acc SDRAM, this is never the case. Therefore
+	 * enable it here from the App side.
+	 */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
+		U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
+#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
+}
+
+static int core_module_init(void)
+{
+	/*
+	 * This needs to be initialized later: it needs the input framework
+	 * to be initialized first.
+	 */
+	return mmc_init(&mmcsd_device);
+}
+module_init(core_module_init);
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
new file mode 100644
index 00000000000..308cdb197a9
--- /dev/null
+++ b/arch/arm/mach-u300/gpio.c
@@ -0,0 +1,703 @@
+/*
+ *
+ * arch/arm/mach-u300/gpio.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 GPIO module.
+ * This can driver either of the two basic GPIO cores
+ * available in the U300 platforms:
+ * COH 901 335   - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
+ * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
+ * Notice that you also have inline macros in <asm-arch/gpio.h>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+/* Need access to SYSCON registers for PADmuxing */
+#include <mach/syscon.h>
+
+#include "padmux.h"
+
+/* Reference to GPIO block clock */
+static struct clk *clk;
+
+/* Memory resource */
+static struct resource *memres;
+static void __iomem *virtbase;
+static struct device *gpiodev;
+
+struct u300_gpio_port {
+	const char *name;
+	int irq;
+	int number;
+};
+
+
+static struct u300_gpio_port gpio_ports[] = {
+	{
+		.name = "gpio0",
+		.number = 0,
+	},
+	{
+		.name = "gpio1",
+		.number = 1,
+	},
+	{
+		.name = "gpio2",
+		.number = 2,
+	},
+#ifdef U300_COH901571_3
+	{
+		.name = "gpio3",
+		.number = 3,
+	},
+	{
+		.name = "gpio4",
+		.number = 4,
+	},
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.name = "gpio5",
+		.number = 5,
+	},
+	{
+		.name = "gpio6",
+		.number = 6,
+	},
+#endif
+#endif
+
+};
+
+
+#ifdef U300_COH901571_3
+
+/* Default input value */
+#define DEFAULT_OUTPUT_LOW   0
+#define DEFAULT_OUTPUT_HIGH  1
+
+/* GPIO Pull-Up status */
+#define DISABLE_PULL_UP  0
+#define ENABLE_PULL_UP  1
+
+#define GPIO_NOT_USED 0
+#define GPIO_IN       1
+#define GPIO_OUT      2
+
+struct u300_gpio_configuration_data {
+	unsigned char pin_usage;
+	unsigned char default_output_value;
+	unsigned char pull_up;
+};
+
+/* Initial configuration */
+const struct u300_gpio_configuration_data
+u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
+#ifdef CONFIG_MACH_U300_BS335
+	/* Port 0, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 1, pins 0-7 */
+	{
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 2, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 3, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 4, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 5, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 6, pind 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	}
+#endif
+
+#ifdef CONFIG_MACH_U300_BS365
+	/* Port 0, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 1, pins 0-7 */
+	{
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 2, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 3, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 4, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		/* These 4 pins doesn't exist on DB3210 */
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	}
+#endif
+};
+#endif
+
+
+/* No users == we can power down GPIO */
+static int gpio_users;
+
+struct gpio_struct {
+	int (*callback)(void *);
+	void *data;
+	int users;
+};
+
+static struct gpio_struct gpio_pin[U300_GPIO_MAX];
+
+/*
+ * Let drivers register callback in order to get notified when there is
+ * an interrupt on the gpio pin
+ */
+int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+{
+	if (gpio_pin[gpio].callback)
+		dev_warn(gpiodev, "%s: WARNING: callback already "
+			 "registered for gpio pin#%d\n", __func__, gpio);
+	gpio_pin[gpio].callback = func;
+	gpio_pin[gpio].data = data;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_register_callback);
+
+int gpio_unregister_callback(unsigned gpio)
+{
+	if (!gpio_pin[gpio].callback)
+		dev_warn(gpiodev, "%s: WARNING: callback already "
+			 "unregistered for gpio pin#%d\n", __func__, gpio);
+	gpio_pin[gpio].callback = NULL;
+	gpio_pin[gpio].data = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_unregister_callback);
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	if (gpio_pin[gpio].users)
+		return -EINVAL;
+	else
+		gpio_pin[gpio].users++;
+
+	gpio_users++;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	gpio_users--;
+	gpio_pin[gpio].users--;
+	if (unlikely(gpio_pin[gpio].users < 0)) {
+		dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
+			 gpio);
+		gpio_pin[gpio].users = 0;
+	}
+
+	return;
+}
+EXPORT_SYMBOL(gpio_free);
+
+/* This returns zero or nonzero */
+int gpio_get_value(unsigned gpio)
+{
+	return readl(virtbase + U300_GPIO_PXPDIR +
+	  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+/*
+ * We hope that the compiler will optimize away the unused branch
+ * in case "value" is a constant
+ */
+void gpio_set_value(unsigned gpio, int value)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value) {
+		/* set */
+		val = readl(virtbase + U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+		  & (1 << (gpio & 0x07));
+		writel(val | (1 << (gpio & 0x07)), virtbase +
+		  U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	} else {
+		/* clear */
+		val = readl(virtbase + U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+		  & (1 << (gpio & 0x07));
+		writel(val & ~(1 << (gpio & 0x07)), virtbase +
+		  U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+int gpio_direction_input(unsigned gpio)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (gpio > U300_GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask out this pin*/
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	/* This is not needed since it sets the bits to zero.*/
+	/* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
+	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (gpio > U300_GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask out this pin */
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	/*
+	 * FIXME: configure for push/pull, open drain or open source per pin
+	 * in setup. The current driver will only support push/pull.
+	 */
+	val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+			<< ((gpio & 0x07) << 1));
+	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	gpio_set_value(gpio, value);
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+/*
+ * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
+ */
+void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+{
+	u32 val;
+	unsigned long flags;
+	local_irq_save(flags);
+
+	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val |= (1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	if (edge)
+		val |= (1 << (gpio & 0x07));
+	else
+		val &= ~(1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(enable_irq_on_gpio_pin);
+
+void disable_irq_on_gpio_pin(unsigned gpio)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val &= ~(1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(disable_irq_on_gpio_pin);
+
+/* Enable (value == 0) or disable (value == 1) internal pullup */
+void gpio_pullup(unsigned gpio, int value)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value) {
+		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+					U300_GPIO_PORTX_SPACING);
+		writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	} else {
+		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+					U300_GPIO_PORTX_SPACING);
+		writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_pullup);
+
+static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+{
+	struct u300_gpio_port *port = dev_id;
+	u32 val;
+	int pin;
+
+	/* Read event register */
+	val = readl(virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask with enable register */
+	val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask relevant bits */
+	val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
+	/* ACK IRQ (clear event) */
+	writel(val, virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Print message */
+	while (val != 0) {
+		unsigned gpio;
+
+		pin = __ffs(val);
+		/* mask off this pin */
+		val &= ~(1 << pin);
+		gpio = (port->number << 3) + pin;
+
+		if (gpio_pin[gpio].callback)
+			(void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
+		else
+			dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
+			       gpio);
+	}
+	return IRQ_HANDLED;
+}
+
+static void gpio_set_initial_values(void)
+{
+#ifdef U300_COH901571_3
+	int i, j;
+	unsigned long flags;
+	u32 val;
+
+	/* Write default values to all pins */
+	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+		val = 0;
+		for (j = 0; j < 8; j++)
+			val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
+		local_irq_save(flags);
+		writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
+		local_irq_restore(flags);
+	}
+
+	/*
+	 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
+	 * to output and 'GPIO_IN' to input for each port. And initalize
+	 * default value on outputs.
+	 */
+	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+		for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
+			local_irq_save(flags);
+			val = readl(virtbase + U300_GPIO_PXPCR +
+					 i * U300_GPIO_PORTX_SPACING);
+			/* Mask out this pin */
+			val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
+
+			if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
+				val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
+			writel(val, virtbase + U300_GPIO_PXPCR +
+					 i * U300_GPIO_PORTX_SPACING);
+			local_irq_restore(flags);
+		}
+	}
+
+	/* Enable or disable the internal pull-ups in the GPIO ASIC block */
+	for (i = 0; i < U300_GPIO_MAX; i++) {
+		val = 0;
+		for (j = 0; j < 8; j++)
+			val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j;
+		local_irq_save(flags);
+		writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
+		local_irq_restore(flags);
+	}
+#endif
+}
+
+static int __init gpio_probe(struct platform_device *pdev)
+{
+	u32 val;
+	int err = 0;
+	int i;
+	int num_irqs;
+
+	gpiodev = &pdev->dev;
+	memset(gpio_pin, 0, sizeof(gpio_pin));
+
+	/* Get GPIO clock */
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		dev_err(gpiodev, "could not get GPIO clock\n");
+		goto err_no_clk;
+	}
+	err = clk_enable(clk);
+	if (err) {
+		dev_err(gpiodev, "could not enable GPIO clock\n");
+		goto err_no_clk_enable;
+	}
+
+	memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!memres)
+		goto err_no_resource;
+
+	if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller")
+	    == NULL) {
+		err = -ENODEV;
+		goto err_no_ioregion;
+	}
+
+	virtbase = ioremap(memres->start, resource_size(memres));
+	if (!virtbase) {
+		err = -ENOMEM;
+		goto err_no_ioremap;
+	}
+	dev_info(gpiodev, "remapped 0x%08x to %p\n",
+		 memres->start, virtbase);
+
+#ifdef U300_COH901335
+	dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
+	/* Turn on the GPIO block */
+	writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+#ifdef U300_COH901571_3
+	dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
+	val = readl(virtbase + U300_GPIO_CR);
+	dev_info(gpiodev, "COH901571/3 block version: %d, " \
+	       "number of cores: %d\n",
+	       ((val & 0x0000FE00) >> 9),
+	       ((val & 0x000001FC) >> 2));
+	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+	/* Set up some padmuxing here */
+#ifdef CONFIG_MMC
+	pmx_set_mission_mode_mmc();
+#endif
+#ifdef CONFIG_SPI_PL022
+	pmx_set_mission_mode_spi();
+#endif
+
+	gpio_set_initial_values();
+
+	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
+
+		gpio_ports[num_irqs].irq =
+			platform_get_irq_byname(pdev,
+						gpio_ports[num_irqs].name);
+
+		err = request_irq(gpio_ports[num_irqs].irq,
+				  gpio_irq_handler, IRQF_DISABLED,
+				  gpio_ports[num_irqs].name,
+				  &gpio_ports[num_irqs]);
+		if (err) {
+			dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
+				gpio_ports[num_irqs].name);
+			goto err_no_irq;
+		}
+		/* Turns off PortX_irq_force */
+		writel(0x0, virtbase + U300_GPIO_PXIFR +
+				 num_irqs * U300_GPIO_PORTX_SPACING);
+	}
+
+	return 0;
+
+ err_no_irq:
+	for (i = 0; i < num_irqs; i++)
+		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+	iounmap(virtbase);
+ err_no_ioremap:
+	release_mem_region(memres->start, memres->end - memres->start);
+ err_no_ioregion:
+ err_no_resource:
+	clk_disable(clk);
+ err_no_clk_enable:
+	clk_put(clk);
+ err_no_clk:
+	dev_info(gpiodev, "module ERROR:%d\n", err);
+	return err;
+}
+
+static int __exit gpio_remove(struct platform_device *pdev)
+{
+	int i;
+
+	/* Turn off the GPIO block */
+	writel(0x00000000U, virtbase + U300_GPIO_CR);
+	for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
+		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+	iounmap(virtbase);
+	release_mem_region(memres->start, memres->end - memres->start);
+	clk_disable(clk);
+	clk_put(clk);
+	return 0;
+}
+
+static struct platform_driver gpio_driver = {
+	.driver		= {
+		.name	= "u300-gpio",
+	},
+	.remove		= __exit_p(gpio_remove),
+};
+
+
+static int __init u300_gpio_init(void)
+{
+	return platform_driver_probe(&gpio_driver, gpio_probe);
+}
+
+static void __exit u300_gpio_exit(void)
+{
+	platform_driver_unregister(&gpio_driver);
+}
+
+arch_initcall(u300_gpio_init);
+module_exit(u300_gpio_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+
+#ifdef U300_COH901571_3
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
+#endif
+
+#ifdef U300_COH901335
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
+#endif
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h
new file mode 100644
index 00000000000..92e3cc872c6
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+int __clk_get(struct clk *clk);
+void __clk_put(struct clk *clk);
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
new file mode 100644
index 00000000000..f3a1cbbeeab
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ *
+ * arch-arm/mach-u300/include/mach/debug-macro.S
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugging macro include header.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+
+	.macro	addruart,rx
+	/* If we move the adress using MMU, use this. */
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1			@ MMU enabled?
+	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
+	ldrne	\rx,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
+	orr	\rx, \rx, #0x00003000
+	.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
new file mode 100644
index 00000000000..20731ae39d3
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ *
+ * arch-arm/mach-u300/include/mach/entry-macro.S
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level IRQ helper macros for ST-Ericsson U300
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
+	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+	mov	\irqnr, #0
+	teq	\irqstat, #0
+	bne	1002f
+1001:	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
+	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+	mov	\irqnr, #32
+	teq	\irqstat, #0
+	beq	1003f
+1002:	tst	\irqstat, #1
+	bne	1003f
+	add	\irqnr, \irqnr, #1
+	movs	\irqstat, \irqstat, lsr #1
+	bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+	.endm
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
new file mode 100644
index 00000000000..c8174128d7e
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -0,0 +1,290 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/gpio.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_H
+#define __MACH_U300_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+/* Switch type depending on platform/chip variant */
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+#define U300_COH901335
+#endif
+#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
+#define U300_COH901571_3
+#endif
+
+/* Get base address for regs here */
+#include "u300-regs.h"
+/* IRQ numbers */
+#include "irqs.h"
+
+/*
+ * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
+ * used for anything, and often is. The event/enable etc figures are for
+ * the lowermost pin (pin 0 on each port), shift this left to match your
+ * pin if you're gonna use these values.
+ */
+#ifdef U300_COH901335
+#define U300_GPIO_PORTX_SPACING				(0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_GPIO_PXPDIR				(0x00)
+#define U300_GPIO_PXPDOR				(0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_GPIO_PXPCR					(0x04)
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_GPIO_PXIEV					(0x08)
+#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEV_IRQ_EVENT			(0x00000001UL)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_GPIO_PXIEN					(0x0C)
+#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEN_IRQ_ENABLE			(0x00000001UL)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_GPIO_PXIFR					(0x10)
+#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIFR_IRQ_FORCE			(0x00000001UL)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_GPIO_PXICR					(0x14)
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_GPIO_PXPER					(0x18)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_GPIO_CR					(0x54)
+#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE			(0x00000001UL)
+/* three ports of 8 bits each = GPIO pins 0..23 */
+#define U300_GPIO_NUM_PORTS 3
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX	(U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
+#endif
+
+#ifdef U300_COH901571_3
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2  (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_GPIO_CR					(0x00)
+#define U300_GPIO_CR_SYNC_SEL_ENABLE			(0x00000002UL)
+#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE			(0x00000001UL)
+#define U300_GPIO_PORTX_SPACING				(0x30)
+/* Port X Pin Data INPUT Register 32bit (R/W) */
+#define U300_GPIO_PXPDIR				(0x04)
+/* Port X Pin Data OUTPUT Register 32bit (R/W) */
+#define U300_GPIO_PXPDOR				(0x08)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_GPIO_PXPCR					(0x0C)
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_GPIO_PXPER					(0x10)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_GPIO_PXIEV					(0x14)
+#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEV_IRQ_EVENT			(0x00000001UL)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_GPIO_PXIEN					(0x18)
+#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEN_IRQ_ENABLE			(0x00000001UL)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_GPIO_PXIFR					(0x1C)
+#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIFR_IRQ_FORCE			(0x00000001UL)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_GPIO_PXICR					(0x20)
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+#ifdef CONFIG_MACH_U300_BS335
+/* seven ports of 8 bits each = GPIO pins 0..55 */
+#define U300_GPIO_NUM_PORTS 7
+#else
+/* five ports of 8 bits each = GPIO pins 0..39 */
+#define U300_GPIO_NUM_PORTS 5
+#endif
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
+#endif
+
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX		0
+#define U300_GPIO_PIN_UART_TX		1
+#define U300_GPIO_PIN_GPIO02		2  /* Unrouted */
+#define U300_GPIO_PIN_GPIO03		3  /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP		4
+#define U300_GPIO_PIN_CAM_REG_EN	5
+#define U300_GPIO_PIN_GPIO06		6  /* Unrouted */
+#define U300_GPIO_PIN_GPIO07		7  /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08		8  /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09		9  /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE		10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE		13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14		14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16		16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17		17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18		18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19		19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+    defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX		0
+#define U300_GPIO_PIN_UART_TX		1
+#define U300_GPIO_PIN_UART_CTS		2
+#define U300_GPIO_PIN_UART_RTS		3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY	4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05		5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD		6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07		7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08		8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09		9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10		10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY	13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14		14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16		16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE		17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18		18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19		19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24		24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25		25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26		26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27		27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28		28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29		29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30		30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31		31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32		32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33		33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34		34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35		35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36		36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37		37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38		38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39		39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40		40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41		41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42		42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43		43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44		44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45		45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46		46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47		47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48		48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49		49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50		50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51		51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52		52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53		53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54		54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55		55 /* Unrouted */
+#endif
+
+#endif
+
+/* translates a pin number to a port number */
+#define PIN_TO_PORT(val) (val >> 3)
+
+/* These can be found in arch/arm/mach-u300/gpio.c */
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+extern int gpio_register_callback(unsigned gpio,
+				  int (*func)(void *arg),
+				  void *);
+extern int gpio_unregister_callback(unsigned gpio);
+extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
+extern void disable_irq_on_gpio_pin(unsigned gpio);
+extern void gpio_pullup(unsigned gpio, int value);
+extern int gpio_get_value(unsigned gpio);
+extern void gpio_set_value(unsigned gpio, int value);
+
+/* wrappers to sleep-enable the previous two functions */
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+	return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+	/*
+	 * FIXME: This is no 1-1 mapping at all, it points to the
+	 * whole block of 8 pins.
+	 */
+	return (irq - IRQ_U300_GPIO_PORT0) << 3;
+}
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/hardware.h b/arch/arm/mach-u300/include/mach/hardware.h
new file mode 100644
index 00000000000..b99d4ce0ac2
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/hardware.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-u300/include/mach/hardware.h
+ */
+#include <asm/sizes.h>
+#include <mach/u300-regs.h>
diff --git a/arch/arm/mach-u300/include/mach/io.h b/arch/arm/mach-u300/include/mach/io.h
new file mode 100644
index 00000000000..5d6b4c13b3a
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/io.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Dummy IO map for being able to use writew()/readw(),
+ * writel()/readw() and similar accessor functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
new file mode 100644
index 00000000000..a6867b12773
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -0,0 +1,114 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/irqs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * IRQ channel definitions for the U300 platforms.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_U300_INTCON0_START		0
+#define IRQ_U300_INTCON1_START		32
+/* These are on INTCON0 - 30 lines */
+#define IRQ_U300_IRQ0_EXT		0
+#define IRQ_U300_IRQ1_EXT		1
+#define IRQ_U300_DMA			2
+#define IRQ_U300_VIDEO_ENC_0		3
+#define IRQ_U300_VIDEO_ENC_1		4
+#define IRQ_U300_AAIF_RX		5
+#define IRQ_U300_AAIF_TX		6
+#define IRQ_U300_AAIF_VGPIO		7
+#define IRQ_U300_AAIF_WAKEUP		8
+#define IRQ_U300_PCM_I2S0_FRAME		9
+#define IRQ_U300_PCM_I2S0_FIFO		10
+#define IRQ_U300_PCM_I2S1_FRAME		11
+#define IRQ_U300_PCM_I2S1_FIFO		12
+#define IRQ_U300_XGAM_GAMCON		13
+#define IRQ_U300_XGAM_CDI		14
+#define IRQ_U300_XGAM_CDICON		15
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+/* MMIACC not used on the DB3210 or DB3350 chips */
+#define IRQ_U300_XGAM_MMIACC		16
+#endif
+#define IRQ_U300_XGAM_PDI		17
+#define IRQ_U300_XGAM_PDICON		18
+#define IRQ_U300_XGAM_GAMEACC		19
+#define IRQ_U300_XGAM_MCIDCT		20
+#define IRQ_U300_APEX			21
+#define IRQ_U300_UART0			22
+#define IRQ_U300_SPI			23
+#define IRQ_U300_TIMER_APP_OS		24
+#define IRQ_U300_TIMER_APP_DD		25
+#define IRQ_U300_TIMER_APP_GP1		26
+#define IRQ_U300_TIMER_APP_GP2		27
+#define IRQ_U300_TIMER_OS		28
+#define IRQ_U300_TIMER_MS		29
+#define IRQ_U300_KEYPAD_KEYBF		30
+#define IRQ_U300_KEYPAD_KEYBR		31
+/* These are on INTCON1 - 32 lines */
+#define IRQ_U300_GPIO_PORT0		32
+#define IRQ_U300_GPIO_PORT1		33
+#define IRQ_U300_GPIO_PORT2		34
+
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
+    defined(CONFIG_MACH_U300_BS335)
+/* These are for DB3150, DB3200 and DB3350 */
+#define IRQ_U300_WDOG			35
+#define IRQ_U300_EVHIST			36
+#define IRQ_U300_MSPRO			37
+#define IRQ_U300_MMCSD_MCIINTR0		38
+#define IRQ_U300_MMCSD_MCIINTR1		39
+#define IRQ_U300_I2C0			40
+#define IRQ_U300_I2C1			41
+#define IRQ_U300_RTC			42
+#define IRQ_U300_NFIF			43
+#define IRQ_U300_NFIF2			44
+#endif
+
+/* DB3150 and DB3200 have only 45 IRQs */
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+#define U300_NR_IRQS			45
+#endif
+
+/* The DB3350-specific interrupt lines */
+#ifdef CONFIG_MACH_U300_BS335
+#define IRQ_U300_ISP_F0			45
+#define IRQ_U300_ISP_F1			46
+#define IRQ_U300_ISP_F2			47
+#define IRQ_U300_ISP_F3			48
+#define IRQ_U300_ISP_F4			49
+#define IRQ_U300_GPIO_PORT3		50
+#define IRQ_U300_SYSCON_PLL_LOCK	51
+#define IRQ_U300_UART1			52
+#define IRQ_U300_GPIO_PORT4		53
+#define IRQ_U300_GPIO_PORT5		54
+#define IRQ_U300_GPIO_PORT6		55
+#define U300_NR_IRQS			56
+#endif
+
+/* The DB3210-specific interrupt lines */
+#ifdef CONFIG_MACH_U300_BS365
+#define IRQ_U300_GPIO_PORT3		35
+#define IRQ_U300_GPIO_PORT4		36
+#define IRQ_U300_WDOG			37
+#define IRQ_U300_EVHIST			38
+#define IRQ_U300_MSPRO			39
+#define IRQ_U300_MMCSD_MCIINTR0		40
+#define IRQ_U300_MMCSD_MCIINTR1		41
+#define IRQ_U300_I2C0			42
+#define IRQ_U300_I2C1			43
+#define IRQ_U300_RTC			44
+#define IRQ_U300_NFIF			45
+#define IRQ_U300_NFIF2			46
+#define IRQ_U300_SYSCON_PLL_LOCK	47
+#define U300_NR_IRQS			48
+#endif
+
+#define NR_IRQS U300_NR_IRQS
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
new file mode 100644
index 00000000000..bf134bcc129
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -0,0 +1,42 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/memory.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Memory virtual/physical mapping constants.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#ifdef CONFIG_MACH_U300_DUAL_RAM
+
+#define PHYS_OFFSET		UL(0x48000000)
+#define BOOT_PARAMS_OFFSET	(PHYS_OFFSET + 0x100)
+
+#else
+
+#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+#define PHYS_OFFSET (0x28000000 + \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#else
+#define PHYS_OFFSET (0x28000000 + \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE +	\
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#endif
+#define BOOT_PARAMS_OFFSET (0x28000000 + \
+	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE +		\
+	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
+#endif
+
+/*
+ * We enable a real big DMA buffer if need be.
+ */
+#define CONSISTENT_DMA_SIZE SZ_4M
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h
new file mode 100644
index 00000000000..77d9210a82e
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/platform.h
@@ -0,0 +1,19 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/platform.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic platform init and mapping functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __ASSEMBLY__
+
+void u300_map_io(void);
+void u300_init_irq(void);
+void u300_init_devices(void);
+extern struct sys_timer u300_timer;
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
new file mode 100644
index 00000000000..1c90d1b1ccb
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -0,0 +1,644 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/syscon.h
+ *
+ *
+ * Copyright (C) 2008 ST-Ericsson AB
+ *
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#ifndef __MACH_SYSCON_H
+#define __MACH_SYSCON_H
+
+/*
+ * All register defines for SYSCON registers that concerns individual
+ * block clocks and reset lines are registered here. This is because
+ * we don't want any other file to try to fool around with this stuff.
+ */
+
+/* APP side SYSCON registers */
+/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */
+/* CLK Control Register 16bit (R/W) */
+#define U300_SYSCON_CCR						(0x0000)
+#define U300_SYSCON_CCR_I2S1_USE_VCXO				(0x0040)
+#define U300_SYSCON_CCR_I2S0_USE_VCXO				(0x0020)
+#define U300_SYSCON_CCR_TURN_VCXO_ON				(0x0008)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK			(0x0007)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER		(0x04)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW			(0x03)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE		(0x02)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH			(0x01)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST			(0x00)
+/* CLK Status Register 16bit (R/W) */
+#define U300_SYSCON_CSR						(0x0004)
+#define U300_SYSCON_CSR_PLL208_LOCK_IND				(0x0002)
+#define U300_SYSCON_CSR_PLL13_LOCK_IND				(0x0001)
+/* Reset lines for SLOW devices 16bit (R/W) */
+#define U300_SYSCON_RSR						(0x0014)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RSR_PPM_RESET_EN				(0x0200)
+#endif
+#define U300_SYSCON_RSR_ACC_TMR_RESET_EN			(0x0100)
+#define U300_SYSCON_RSR_APP_TMR_RESET_EN			(0x0080)
+#define U300_SYSCON_RSR_RTC_RESET_EN				(0x0040)
+#define U300_SYSCON_RSR_KEYPAD_RESET_EN				(0x0020)
+#define U300_SYSCON_RSR_GPIO_RESET_EN				(0x0010)
+#define U300_SYSCON_RSR_EH_RESET_EN				(0x0008)
+#define U300_SYSCON_RSR_BTR_RESET_EN				(0x0004)
+#define U300_SYSCON_RSR_UART_RESET_EN				(0x0002)
+#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN			(0x0001)
+/* Reset lines for FAST devices 16bit (R/W) */
+#define U300_SYSCON_RFR						(0x0018)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RFR_UART1_RESET_ENABLE			(0x0080)
+#endif
+#define U300_SYSCON_RFR_SPI_RESET_ENABLE			(0x0040)
+#define U300_SYSCON_RFR_MMC_RESET_ENABLE			(0x0020)
+#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE			(0x0010)
+#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE			(0x0008)
+#define U300_SYSCON_RFR_I2C1_RESET_ENABLE			(0x0004)
+#define U300_SYSCON_RFR_I2C0_RESET_ENABLE			(0x0002)
+#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE		(0x0001)
+/* Reset lines for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_RRR						(0x001c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RRR_CDS_RESET_EN				(0x4000)
+#define U300_SYSCON_RRR_ISP_RESET_EN				(0x2000)
+#endif
+#define U300_SYSCON_RRR_INTCON_RESET_EN				(0x1000)
+#define U300_SYSCON_RRR_MSPRO_RESET_EN				(0x0800)
+#define U300_SYSCON_RRR_XGAM_RESET_EN				(0x0100)
+#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN			(0x0080)
+#define U300_SYSCON_RRR_NANDIF_RESET_EN				(0x0040)
+#define U300_SYSCON_RRR_EMIF_RESET_EN				(0x0020)
+#define U300_SYSCON_RRR_DMAC_RESET_EN				(0x0010)
+#define U300_SYSCON_RRR_CPU_RESET_EN				(0x0008)
+#define U300_SYSCON_RRR_APEX_RESET_EN				(0x0004)
+#define U300_SYSCON_RRR_AHB_RESET_EN				(0x0002)
+#define U300_SYSCON_RRR_AAIF_RESET_EN				(0x0001)
+/* Clock enable for SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CESR					(0x0020)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CESR_PPM_CLK_EN				(0x0200)
+#endif
+#define U300_SYSCON_CESR_ACC_TMR_CLK_EN				(0x0100)
+#define U300_SYSCON_CESR_APP_TMR_CLK_EN				(0x0080)
+#define U300_SYSCON_CESR_KEYPAD_CLK_EN				(0x0040)
+#define U300_SYSCON_CESR_GPIO_CLK_EN				(0x0010)
+#define U300_SYSCON_CESR_EH_CLK_EN				(0x0008)
+#define U300_SYSCON_CESR_BTR_CLK_EN				(0x0004)
+#define U300_SYSCON_CESR_UART_CLK_EN				(0x0002)
+#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN			(0x0001)
+/* Clock enable for FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CEFR					(0x0024)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CEFR_UART1_CLK_EN				(0x0200)
+#endif
+#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN			(0x0100)
+#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN			(0x0080)
+#define U300_SYSCON_CEFR_SPI_CLK_EN				(0x0040)
+#define U300_SYSCON_CEFR_MMC_CLK_EN				(0x0020)
+#define U300_SYSCON_CEFR_I2S1_CLK_EN    			(0x0010)
+#define U300_SYSCON_CEFR_I2S0_CLK_EN     			(0x0008)
+#define U300_SYSCON_CEFR_I2C1_CLK_EN     			(0x0004)
+#define U300_SYSCON_CEFR_I2C0_CLK_EN     			(0x0002)
+#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN			(0x0001)
+/* Clock enable for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CERR					(0x0028)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CERR_CDS_CLK_EN				(0x2000)
+#define U300_SYSCON_CERR_ISP_CLK_EN				(0x1000)
+#endif
+#define U300_SYSCON_CERR_MSPRO_CLK_EN				(0x0800)
+#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN		(0x0400)
+#define U300_SYSCON_CERR_SEMI_CLK_EN				(0x0200)
+#define U300_SYSCON_CERR_XGAM_CLK_EN				(0x0100)
+#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN			(0x0080)
+#define U300_SYSCON_CERR_NANDIF_CLK_EN				(0x0040)
+#define U300_SYSCON_CERR_EMIF_CLK_EN				(0x0020)
+#define U300_SYSCON_CERR_DMAC_CLK_EN				(0x0010)
+#define U300_SYSCON_CERR_CPU_CLK_EN				(0x0008)
+#define U300_SYSCON_CERR_APEX_CLK_EN				(0x0004)
+#define U300_SYSCON_CERR_AHB_CLK_EN				(0x0002)
+#define U300_SYSCON_CERR_AAIF_CLK_EN				(0x0001)
+/* Single block clock enable 16bit (-/W) */
+#define U300_SYSCON_SBCER					(0x002c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_PPM_CLK_EN				(0x0009)
+#endif
+#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN			(0x0008)
+#define U300_SYSCON_SBCER_APP_TMR_CLK_EN			(0x0007)
+#define U300_SYSCON_SBCER_KEYPAD_CLK_EN				(0x0006)
+#define U300_SYSCON_SBCER_GPIO_CLK_EN				(0x0004)
+#define U300_SYSCON_SBCER_EH_CLK_EN				(0x0003)
+#define U300_SYSCON_SBCER_BTR_CLK_EN				(0x0002)
+#define U300_SYSCON_SBCER_UART_CLK_EN				(0x0001)
+#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN			(0x0000)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_UART1_CLK_EN				(0x0019)
+#endif
+#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN			(0x0018)
+#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN			(0x0017)
+#define U300_SYSCON_SBCER_SPI_CLK_EN				(0x0016)
+#define U300_SYSCON_SBCER_MMC_CLK_EN				(0x0015)
+#define U300_SYSCON_SBCER_I2S1_CLK_EN				(0x0014)
+#define U300_SYSCON_SBCER_I2S0_CLK_EN				(0x0013)
+#define U300_SYSCON_SBCER_I2C1_CLK_EN				(0x0012)
+#define U300_SYSCON_SBCER_I2C0_CLK_EN				(0x0011)
+#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN			(0x0010)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_CDS_CLK_EN				(0x002D)
+#define U300_SYSCON_SBCER_ISP_CLK_EN				(0x002C)
+#endif
+#define U300_SYSCON_SBCER_MSPRO_CLK_EN				(0x002B)
+#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN		(0x002A)
+#define U300_SYSCON_SBCER_SEMI_CLK_EN				(0x0029)
+#define U300_SYSCON_SBCER_XGAM_CLK_EN				(0x0028)
+#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN			(0x0027)
+#define U300_SYSCON_SBCER_NANDIF_CLK_EN				(0x0026)
+#define U300_SYSCON_SBCER_EMIF_CLK_EN				(0x0025)
+#define U300_SYSCON_SBCER_DMAC_CLK_EN				(0x0024)
+#define U300_SYSCON_SBCER_CPU_CLK_EN				(0x0023)
+#define U300_SYSCON_SBCER_APEX_CLK_EN				(0x0022)
+#define U300_SYSCON_SBCER_AHB_CLK_EN				(0x0021)
+#define U300_SYSCON_SBCER_AAIF_CLK_EN				(0x0020)
+/* Single block clock disable 16bit (-/W) */
+#define U300_SYSCON_SBCDR					(0x0030)
+/* Same values as above for SBCER */
+/* Clock force SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CFSR					(0x003c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN			(0x0200)
+#endif
+#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN			(0x0100)
+#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN			(0x0080)
+#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN			(0x0020)
+#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN			(0x0010)
+#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN			(0x0008)
+#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN			(0x0004)
+#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN			(0x0002)
+#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN		(0x0001)
+/* Clock force FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CFFR					(0x40)
+/* Values not defined. Define if you want to use them. */
+/* Clock force the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CFRR					(0x44)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN			(0x2000)
+#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN			(0x1000)
+#endif
+#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN			(0x0800)
+#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN		(0x0400)
+#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN			(0x0200)
+#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN			(0x0100)
+#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN			(0x0080)
+#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN			(0x0040)
+#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN			(0x0020)
+#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN			(0x0010)
+#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN			(0x0008)
+#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN			(0x0004)
+#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN			(0x0002)
+#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN			(0x0001)
+/* PLL208 Frequency Control 16bit (R/W) */
+#define U300_SYSCON_PFCR					(0x48)
+#define U300_SYSCON_PFCR_DPLL_MULT_NUM				(0x000F)
+/* Power Management Control 16bit (R/W) */
+#define U300_SYSCON_PMCR					(0x50)
+#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
+#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
+/*
+ * All other clocking registers moved to clock.c!
+ */
+/* Reset Out 16bit (R/W) */
+#define U300_SYSCON_RCR						(0x6c)
+#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE			(0x0001)
+/* EMIF Slew Rate Control 16bit (R/W) */
+#define U300_SYSCON_SRCLR					(0x70)
+#define U300_SYSCON_SRCLR_MASK					(0x03FF)
+#define U300_SYSCON_SRCLR_VALUE					(0x03FF)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B			(0x0200)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A			(0x0100)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B			(0x0080)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A			(0x0040)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B			(0x0020)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A			(0x0010)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B			(0x0008)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A			(0x0004)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B			(0x0002)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A			(0x0001)
+/* EMIF Clock Control Register 16bit (R/W) */
+#define U300_SYSCON_ECCR					(0x0078)
+#define U300_SYSCON_ECCR_MASK					(0x000F)
+#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE		(0x0008)
+#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE	(0x0004)
+#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE		(0x0002)
+#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE		(0x0001)
+/* PAD MUX Control register 1 (LOW) 16bit (R/W) */
+#define U300_SYSCON_PMC1LR					(0x007C)
+#define U300_SYSCON_PMC1LR_MASK					(0xFFFF)
+#define U300_SYSCON_PMC1LR_CDI_MASK				(0xC000)
+#define U300_SYSCON_PMC1LR_CDI_CDI				(0x0000)
+#define U300_SYSCON_PMC1LR_CDI_EMIF				(0x4000)
+#define U300_SYSCON_PMC1LR_CDI_GPIO				(0x8000)
+#define U300_SYSCON_PMC1LR_CDI_WCDMA				(0xC000)
+#define U300_SYSCON_PMC1LR_PDI_MASK				(0x3000)
+#define U300_SYSCON_PMC1LR_PDI_PDI				(0x0000)
+#define U300_SYSCON_PMC1LR_PDI_EGG				(0x1000)
+#define U300_SYSCON_PMC1LR_PDI_WCDMA				(0x3000)
+#define U300_SYSCON_PMC1LR_MMCSD_MASK				(0x0C00)
+#define U300_SYSCON_PMC1LR_MMCSD_MMCSD				(0x0000)
+#define U300_SYSCON_PMC1LR_MMCSD_MSPRO				(0x0400)
+#define U300_SYSCON_PMC1LR_MMCSD_DSP				(0x0800)
+#define U300_SYSCON_PMC1LR_MMCSD_WCDMA				(0x0C00)
+#define U300_SYSCON_PMC1LR_ETM_MASK				(0x0300)
+#define U300_SYSCON_PMC1LR_ETM_ACC				(0x0000)
+#define U300_SYSCON_PMC1LR_ETM_APP				(0x0100)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK			(0x00C0)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF			(0x0040)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM			(0x0080)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB		(0x00C0)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK			(0x0030)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF			(0x0010)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM			(0x0020)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI			(0x0030)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK			(0x000C)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF			(0x0004)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM			(0x0008)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI			(0x000C)
+#define U300_SYSCON_PMC1LR_EMIF_1_MASK				(0x0003)
+#define U300_SYSCON_PMC1LR_EMIF_1_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0			(0x0001)
+#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1			(0x0002)
+#define U300_SYSCON_PMC1LR_EMIF_1				(0x0003)
+/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */
+#define U300_SYSCON_PMC1HR					(0x007E)
+#define U300_SYSCON_PMC1HR_MASK					(0xFFFF)
+#define U300_SYSCON_PMC1HR_MISC_2_MASK				(0xC000)
+#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_MISC_2_MSPRO				(0x4000)
+#define U300_SYSCON_PMC1HR_MISC_2_DSP				(0x8000)
+#define U300_SYSCON_PMC1HR_MISC_2_AAIF				(0xC000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK			(0x3000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF			(0x1000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP			(0x2000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF			(0x3000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK			(0x0C00)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC			(0x0400)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP			(0x0800)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF			(0x0C00)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK			(0x0300)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO		(0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI			(0x0100)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF			(0x0300)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK			(0x00C0)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO		(0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI			(0x0040)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF			(0x00C0)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK			(0x0030)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI			(0x0010)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP			(0x0020)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF			(0x0030)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK			(0x000C)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0			(0x0004)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS			(0x0008)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF			(0x000C)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK			(0x0003)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0			(0x0001)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF			(0x0003)
+/* Step one for killing the applications system 16bit (-/W) */
+#define U300_SYSCON_KA1R					(0x0080)
+#define U300_SYSCON_KA1R_MASK					(0xFFFF)
+#define U300_SYSCON_KA1R_VALUE					(0xFFFF)
+/* Step two for killing the application system 16bit (-/W) */
+#define U300_SYSCON_KA2R					(0x0084)
+#define U300_SYSCON_KA2R_MASK					(0xFFFF)
+#define U300_SYSCON_KA2R_VALUE					(0xFFFF)
+/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
+#define U300_SYSCON_MMF0R					(0x90)
+#define U300_SYSCON_MMF0R_MASK					(0x00FF)
+#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK			(0x00F0)
+#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK			(0x000F)
+/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
+#define U300_SYSCON_MMF1R					(0x94)
+#define U300_SYSCON_MMF1R_MASK					(0x00FF)
+#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK			(0x00F0)
+#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK			(0x000F)
+/* AAIF control register 16 bit (R/W) */
+#define U300_SYSCON_AAIFCR					(0x98)
+#define U300_SYSCON_AAIFCR_MASK					(0x0003)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK			(0x0003)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL			(0x0000)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING			(0x0001)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT			(0x0002)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT			(0x0003)
+/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
+#define U300_SYSCON_MMCR					(0x9C)
+#define U300_SYSCON_MMCR_MASK					(0x0003)
+#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
+#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
+
+/* TODO: More SYSCON registers missing */
+#define U300_SYSCON_PMC3R					(0x10c)
+#define U300_SYSCON_PMC3R_APP_MISC_11_MASK			(0xc000)
+#define U300_SYSCON_PMC3R_APP_MISC_11_SPI			(0x4000)
+#define U300_SYSCON_PMC3R_APP_MISC_10_MASK			(0x3000)
+#define U300_SYSCON_PMC3R_APP_MISC_10_SPI			(0x1000)
+/* TODO: Missing other configs, I just added the SPI stuff */
+
+/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
+#define U300_SYSCON_S0CCR					(0x120)
+#define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
+#define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S0CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S0CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S0CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
+#define U300_SYSCON_S1CCR					(0x124)
+#define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
+#define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S1CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S1CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S1CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
+#define U300_SYSCON_S2CCR					(0x128)
+#define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
+#define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S2CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S2CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S2CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */
+#define U300_SYSCON_MCR						(0x12c)
+#define U300_SYSCON_MCR_FIELD_MASK				(0x00FF)
+#define U300_SYSCON_MCR_PMGEN_CR_4_MASK				(0x00C0)
+#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO				(0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_4_SPI				(0x0040)
+#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF				(0x00C0)
+#define U300_SYSCON_MCR_PMGEN_CR_2_MASK				(0x0030)
+#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO				(0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC		(0x0010)
+#define U300_SYSCON_MCR_PMGEN_CR_2_DSP				(0x0020)
+#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF				(0x0030)
+#define U300_SYSCON_MCR_PMGEN_CR_0_MASK				(0x000C)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1		(0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2		(0x0004)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3		(0x0008)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM			(0x000C)
+#define U300_SYSCON_MCR_PM1G_MODE_ENABLE			(0x0002)
+#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE			(0x0001)
+/* Clock activity observability register 0 */
+#define U300_SYSCON_C0OAR					(0x140)
+#define U300_SYSCON_C0OAR_MASK					(0xFFFF)
+#define U300_SYSCON_C0OAR_VALUE					(0xFFFF)
+#define U300_SYSCON_C0OAR_BT_H_CLK				(0x8000)
+#define U300_SYSCON_C0OAR_ASPB_P_CLK				(0x4000)
+#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK			(0x2000)
+#define U300_SYSCON_C0OAR_APP_SEMI_CLK				(0x1000)
+#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK			(0x0800)
+#define U300_SYSCON_C0OAR_APP_I2S1_CLK				(0x0400)
+#define U300_SYSCON_C0OAR_APP_I2S0_CLK				(0x0200)
+#define U300_SYSCON_C0OAR_APP_CPU_CLK				(0x0100)
+#define U300_SYSCON_C0OAR_APP_52_CLK				(0x0080)
+#define U300_SYSCON_C0OAR_APP_208_CLK				(0x0040)
+#define U300_SYSCON_C0OAR_APP_104_CLK				(0x0020)
+#define U300_SYSCON_C0OAR_APEX_CLK				(0x0010)
+#define U300_SYSCON_C0OAR_AHPB_M_H_CLK				(0x0008)
+#define U300_SYSCON_C0OAR_AHB_CLK				(0x0004)
+#define U300_SYSCON_C0OAR_AFPB_P_CLK				(0x0002)
+#define U300_SYSCON_C0OAR_AAIF_CLK				(0x0001)
+/* Clock activity observability register 1 */
+#define U300_SYSCON_C1OAR					(0x144)
+#define U300_SYSCON_C1OAR_MASK					(0x3FFE)
+#define U300_SYSCON_C1OAR_VALUE					(0x3FFE)
+#define U300_SYSCON_C1OAR_NFIF_F_CLK				(0x2000)
+#define U300_SYSCON_C1OAR_MSPRO_CLK				(0x1000)
+#define U300_SYSCON_C1OAR_MMC_P_CLK				(0x0800)
+#define U300_SYSCON_C1OAR_MMC_CLK				(0x0400)
+#define U300_SYSCON_C1OAR_KP_P_CLK				(0x0200)
+#define U300_SYSCON_C1OAR_I2C1_P_CLK				(0x0100)
+#define U300_SYSCON_C1OAR_I2C0_P_CLK				(0x0080)
+#define U300_SYSCON_C1OAR_GPIO_CLK				(0x0040)
+#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK				(0x0020)
+#define U300_SYSCON_C1OAR_EMIF_H_CLK				(0x0010)
+#define U300_SYSCON_C1OAR_EVHIST_CLK				(0x0008)
+#define U300_SYSCON_C1OAR_PPM_CLK				(0x0004)
+#define U300_SYSCON_C1OAR_DMA_CLK				(0x0002)
+/* Clock activity observability register 2 */
+#define U300_SYSCON_C2OAR					(0x148)
+#define U300_SYSCON_C2OAR_MASK					(0x0FFF)
+#define U300_SYSCON_C2OAR_VALUE					(0x0FFF)
+#define U300_SYSCON_C2OAR_XGAM_CDI_CLK				(0x0800)
+#define U300_SYSCON_C2OAR_XGAM_CLK				(0x0400)
+#define U300_SYSCON_C2OAR_VC_H_CLK				(0x0200)
+#define U300_SYSCON_C2OAR_VC_CLK				(0x0100)
+#define U300_SYSCON_C2OAR_UA_P_CLK				(0x0080)
+#define U300_SYSCON_C2OAR_TMR1_CLK				(0x0040)
+#define U300_SYSCON_C2OAR_TMR0_CLK				(0x0020)
+#define U300_SYSCON_C2OAR_SPI_P_CLK				(0x0010)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK			(0x0008)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CLK				(0x0004)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK			(0x0002)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CLK				(0x0001)
+
+/* Chip ID register 16bit (R/-) */
+#define U300_SYSCON_CIDR					(0x400)
+/* Video IRQ clear 16bit (R/W) */
+#define U300_SYSCON_VICR					(0x404)
+#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE		(0x0002)
+#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE		(0x0001)
+/* SMCR */
+#define U300_SYSCON_SMCR					(0x4d0)
+#define U300_SYSCON_SMCR_FIELD_MASK				(0x000e)
+#define U300_SYSCON_SMCR_SEMI_SREFACK_IND			(0x0008)
+#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE			(0x0004)
+#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE		(0x0002)
+/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
+#define U300_SYSCON_CSDR					(0x4f0)
+#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE			(0x0001)
+/* PRINT_CONTROL Print Control 16bit (R/-) */
+#define U300_SYSCON_PCR						(0x4f8)
+#define U300_SYSCON_PCR_SERV_IND				(0x0001)
+/* BOOT_CONTROL 16bit (R/-) */
+#define U300_SYSCON_BCR						(0x4fc)
+#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND		(0x0400)
+#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND		(0x0200)
+#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK			(0x01FC)
+#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK			(0x0003)
+
+
+/* CPU clock defines */
+/**
+ * CPU high frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_HIGH    208
+/**
+ * CPU medium frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_MEDIUM  104
+/**
+ * CPU low frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_LOW      13
+
+/* EMIF clock defines */
+/**
+ * EMIF high frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_HIGH   104
+/**
+ * EMIF medium frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_MEDIUM 104
+/**
+ * EMIF low frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_LOW     13
+
+/* AHB clock defines */
+/**
+ * AHB high frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_HIGH     52
+/**
+ * AHB medium frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_MEDIUM   52
+/**
+ * AHB low frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_LOW       7  /* i.e 13/2=6.5MHz */
+
+enum syscon_busmaster {
+  SYSCON_BM_DMAC,
+  SYSCON_BM_XGAM,
+  SYSCON_BM_VIDEO_ENC
+};
+
+/*
+ * Note that this array must match the order of the array "clk_reg"
+ * in syscon.c
+ */
+enum syscon_clk {
+  SYSCON_CLKCONTROL_SLOW_BRIDGE,
+  SYSCON_CLKCONTROL_UART,
+  SYSCON_CLKCONTROL_BTR,
+  SYSCON_CLKCONTROL_EH,
+  SYSCON_CLKCONTROL_GPIO,
+  SYSCON_CLKCONTROL_KEYPAD,
+  SYSCON_CLKCONTROL_APP_TIMER,
+  SYSCON_CLKCONTROL_ACC_TIMER,
+  SYSCON_CLKCONTROL_FAST_BRIDGE,
+  SYSCON_CLKCONTROL_I2C0,
+  SYSCON_CLKCONTROL_I2C1,
+  SYSCON_CLKCONTROL_I2S0,
+  SYSCON_CLKCONTROL_I2S1,
+  SYSCON_CLKCONTROL_MMC,
+  SYSCON_CLKCONTROL_SPI,
+  SYSCON_CLKCONTROL_I2S0_CORE,
+  SYSCON_CLKCONTROL_I2S1_CORE,
+  SYSCON_CLKCONTROL_AAIF,
+  SYSCON_CLKCONTROL_AHB,
+  SYSCON_CLKCONTROL_APEX,
+  SYSCON_CLKCONTROL_CPU,
+  SYSCON_CLKCONTROL_DMA,
+  SYSCON_CLKCONTROL_EMIF,
+  SYSCON_CLKCONTROL_NAND_IF,
+  SYSCON_CLKCONTROL_VIDEO_ENC,
+  SYSCON_CLKCONTROL_XGAM,
+  SYSCON_CLKCONTROL_SEMI,
+  SYSCON_CLKCONTROL_AHB_SUBSYS,
+  SYSCON_CLKCONTROL_MSPRO
+};
+
+enum syscon_sysclk_mode {
+  SYSCON_SYSCLK_DISABLED,
+  SYSCON_SYSCLK_M_CLK,
+  SYSCON_SYSCLK_ACC_FSM,
+  SYSCON_SYSCLK_PLL60_48,
+  SYSCON_SYSCLK_PLL60_60,
+  SYSCON_SYSCLK_ACC_PLL208,
+  SYSCON_SYSCLK_APP_PLL13,
+  SYSCON_SYSCLK_APP_FSM,
+  SYSCON_SYSCLK_RTC,
+  SYSCON_SYSCLK_APP_PLL208
+};
+
+enum syscon_sysclk_req {
+  SYSCON_SYSCLKREQ_DISABLED,
+  SYSCON_SYSCLKREQ_ACTIVE_LOW
+};
+
+enum syscon_clk_mode {
+  SYSCON_CLKMODE_OFF,
+  SYSCON_CLKMODE_DEFAULT,
+  SYSCON_CLKMODE_LOW,
+  SYSCON_CLKMODE_MEDIUM,
+  SYSCON_CLKMODE_HIGH,
+  SYSCON_CLKMODE_PERMANENT,
+  SYSCON_CLKMODE_ON,
+};
+
+enum syscon_call_mode {
+  SYSCON_CLKCALL_NOWAIT,
+  SYSCON_CLKCALL_WAIT,
+};
+
+int syscon_dc_on(bool keep_power_on);
+int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster,
+				      bool active);
+bool syscon_get_busmaster_active_state(void);
+int syscon_set_sleep_mask(enum syscon_clk,
+			  bool sleep_ctrl);
+int syscon_config_sysclk(u32 sysclk,
+			 enum syscon_sysclk_mode sysclkmode,
+			 bool inverse,
+			 u32 divisor,
+			 enum syscon_sysclk_req sysclkreq);
+bool syscon_can_turn_off_semi_clock(void);
+
+/* This function is restricted to core.c */
+int syscon_request_normal_power(bool req);
+
+/* This function is restricted to be used by platform_speed.c */
+int syscon_speed_request(enum syscon_call_mode wait_mode,
+			 enum syscon_clk_mode req_clk_mode);
+#endif /* __MACH_SYSCON_H */
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
new file mode 100644
index 00000000000..8daf13634ce
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/system.h
@@ -0,0 +1,42 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/system.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * System shutdown and reset functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+
+/* Forward declare this function from the watchdog */
+void coh901327_watchdog_reset(void);
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	switch (mode) {
+	case 's':
+	case 'h':
+		printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
+		/* Disable interrupts */
+		local_irq_disable();
+#ifdef CONFIG_COH901327_WATCHDOG
+		coh901327_watchdog_reset();
+#endif
+		break;
+	default:
+		/* Do nothing */
+		break;
+	}
+	/* Wait for system do die/reset. */
+	while (1);
+}
diff --git a/arch/arm/mach-u300/include/mach/timex.h b/arch/arm/mach-u300/include/mach/timex.h
new file mode 100644
index 00000000000..f233b72633f
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/timex.h
@@ -0,0 +1,17 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/timex.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Platform tick rate definition.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+/* This is for the APP OS GP1 (General Purpose 1) timer */
+#define CLOCK_TICK_RATE		1000000
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
new file mode 100644
index 00000000000..88333dfb19f
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -0,0 +1,187 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/u300-regs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic register address definitions in physical memory and
+ * some block defintions for core devices like the timer.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_REGS_H
+#define __MACH_U300_REGS_H
+
+/*
+ * These are the large blocks of memory allocated for I/O.
+ * the defines are used for setting up the I/O memory mapping.
+ */
+
+/* NAND Flash CS0 */
+#define U300_NAND_CS0_PHYS_BASE		0x80000000
+#define U300_NAND_CS0_VIRT_BASE		0xff040000
+
+/* NFIF */
+#define U300_NAND_IF_PHYS_BASE		0x9f800000
+#define U300_NAND_IF_VIRT_BASE		0xff030000
+
+/* AHB Peripherals */
+#define U300_AHB_PER_PHYS_BASE		0xa0000000
+#define U300_AHB_PER_VIRT_BASE		0xff010000
+
+/* FAST Peripherals */
+#define U300_FAST_PER_PHYS_BASE		0xc0000000
+#define U300_FAST_PER_VIRT_BASE		0xff020000
+
+/* SLOW Peripherals */
+#define U300_SLOW_PER_PHYS_BASE		0xc0010000
+#define U300_SLOW_PER_VIRT_BASE		0xff000000
+
+/* Boot ROM */
+#define U300_BOOTROM_PHYS_BASE		0xffff0000
+#define U300_BOOTROM_VIRT_BASE		0xffff0000
+
+/* SEMI config base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SEMI_CONFIG_BASE		0x2FFE0000
+#else
+#define U300_SEMI_CONFIG_BASE		0x30000000
+#endif
+
+/*
+ * All the following peripherals are specified at their PHYSICAL address,
+ * so if you need to access them (in the kernel), you MUST use the macros
+ * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
+ * etc.
+ */
+
+/*
+ * AHB peripherals
+ */
+
+/* AHB Peripherals Bridge Controller */
+#define U300_AHB_BRIDGE_BASE		(U300_AHB_PER_PHYS_BASE+0x0000)
+
+/* Vectored Interrupt Controller 0, servicing 32 interrupts */
+#define U300_INTCON0_BASE		(U300_AHB_PER_PHYS_BASE+0x1000)
+#define U300_INTCON0_VBASE		(U300_AHB_PER_VIRT_BASE+0x1000)
+
+/* Vectored Interrupt Controller 1, servicing 32 interrupts */
+#define U300_INTCON1_BASE		(U300_AHB_PER_PHYS_BASE+0x2000)
+#define U300_INTCON1_VBASE		(U300_AHB_PER_VIRT_BASE+0x2000)
+
+/* Memory Stick Pro (MSPRO) controller */
+#define U300_MSPRO_BASE			(U300_AHB_PER_PHYS_BASE+0x3000)
+
+/* EMIF Configuration Area */
+#define U300_EMIF_CFG_BASE		(U300_AHB_PER_PHYS_BASE+0x4000)
+
+
+/*
+ * FAST peripherals
+ */
+
+/* FAST bridge control */
+#define U300_FAST_BRIDGE_BASE		(U300_FAST_PER_PHYS_BASE+0x0000)
+
+/* MMC/SD controller */
+#define U300_MMCSD_BASE			(U300_FAST_PER_PHYS_BASE+0x1000)
+
+/* PCM I2S0 controller */
+#define U300_PCM_I2S0_BASE		(U300_FAST_PER_PHYS_BASE+0x2000)
+
+/* PCM I2S1 controller */
+#define U300_PCM_I2S1_BASE		(U300_FAST_PER_PHYS_BASE+0x3000)
+
+/* I2C0 controller */
+#define U300_I2C0_BASE			(U300_FAST_PER_PHYS_BASE+0x4000)
+
+/* I2C1 controller */
+#define U300_I2C1_BASE			(U300_FAST_PER_PHYS_BASE+0x5000)
+
+/* SPI controller */
+#define U300_SPI_BASE			(U300_FAST_PER_PHYS_BASE+0x6000)
+
+#ifdef CONFIG_MACH_U300_BS335
+/* Fast UART1 on U335 only */
+#define U300_UART1_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+#endif
+
+/*
+ * SLOW peripherals
+ */
+
+/* SLOW bridge control */
+#define U300_SLOW_BRIDGE_BASE		(U300_SLOW_PER_PHYS_BASE)
+
+/* SYSCON */
+#define U300_SYSCON_BASE		(U300_SLOW_PER_PHYS_BASE+0x1000)
+#define U300_SYSCON_VBASE		(U300_SLOW_PER_VIRT_BASE+0x1000)
+
+/* Watchdog */
+#define U300_WDOG_BASE			(U300_SLOW_PER_PHYS_BASE+0x2000)
+
+/* UART0 */
+#define U300_UART0_BASE			(U300_SLOW_PER_PHYS_BASE+0x3000)
+
+/* APP side special timer */
+#define U300_TIMER_APP_BASE		(U300_SLOW_PER_PHYS_BASE+0x4000)
+#define U300_TIMER_APP_VBASE		(U300_SLOW_PER_VIRT_BASE+0x4000)
+
+/* Keypad */
+#define U300_KEYPAD_BASE		(U300_SLOW_PER_PHYS_BASE+0x5000)
+
+/* GPIO */
+#define U300_GPIO_BASE			(U300_SLOW_PER_PHYS_BASE+0x6000)
+
+/* RTC */
+#define U300_RTC_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+
+/* Bus tracer */
+#define U300_BUSTR_BASE			(U300_SLOW_PER_PHYS_BASE+0x8000)
+
+/* Event handler (hardware queue) */
+#define U300_EVHIST_BASE		(U300_SLOW_PER_PHYS_BASE+0x9000)
+
+/* Genric Timer */
+#define U300_TIMER_BASE			(U300_SLOW_PER_PHYS_BASE+0xa000)
+
+/* PPM */
+#define U300_PPM_BASE			(U300_SLOW_PER_PHYS_BASE+0xb000)
+
+
+/*
+ * REST peripherals
+ */
+
+/* ISP (image signal processor) is only available in U335 */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_ISP_BASE			(0xA0008000)
+#endif
+
+/* DMA Controller base */
+#define U300_DMAC_BASE			(0xC0020000)
+
+/* MSL Base */
+#define U300_MSL_BASE			(0xc0022000)
+
+/* APEX Base */
+#define U300_APEX_BASE			(0xc0030000)
+
+/* Video Encoder Base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_VIDEOENC_BASE		(0xc0080000)
+#else
+#define U300_VIDEOENC_BASE		(0xc0040000)
+#endif
+
+/* XGAM Base */
+#define U300_XGAM_BASE			(0xd0000000)
+
+/*
+ * Virtual accessor macros for static devices
+ */
+
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-u300/include/mach/uncompress.h
index 46d4ca91af7..29acb718acf 100644
--- a/arch/arm/mach-imx/include/mach/system.h
+++ b/arch/arm/mach-u300/include/mach/uncompress.h
@@ -1,8 +1,7 @@
 /*
- *  arch/arm/mach-imxads/include/mach/system.h
+ * arch/arm/mach-u300/include/mach/uncompress.h
  *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2003 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,23 +17,30 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
+#define AMBA_UART_DR	(*(volatile unsigned char *)0xc0013000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0xc001302C)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0xc0013030)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0xc0013018)
 
-static void
-arch_idle(void)
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
 {
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
+	while (AMBA_UART_FR & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR = c;
 }
 
-static inline void
-arch_reset(char mode, const char *cmd)
+static inline void flush(void)
 {
-	cpu_reset(0);
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
 }
 
-#endif
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h
new file mode 100644
index 00000000000..b00c51a66fb
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/vmalloc.h
@@ -0,0 +1,12 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/vmalloc.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Virtual memory allocations
+ * End must be above the I/O registers and on an even 2MiB boundary.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
new file mode 100644
index 00000000000..3138d3955c9
--- /dev/null
+++ b/arch/arm/mach-u300/mmc.c
@@ -0,0 +1,216 @@
+/*
+ *
+ * arch/arm/mach-u300/mmc.c
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Johan Lundin <johan.lundin@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/mmc/host.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/mmc.h>
+#include "mmc.h"
+
+struct mmci_card_event {
+	struct input_dev *mmc_input;
+	int mmc_inserted;
+	struct work_struct workq;
+	struct mmc_platform_data mmc0_plat_data;
+};
+
+static unsigned int mmc_status(struct device *dev)
+{
+	struct mmci_card_event *mmci_card = container_of(
+		dev->platform_data,
+		struct mmci_card_event, mmc0_plat_data);
+
+	return mmci_card->mmc_inserted;
+}
+
+/*
+ * Here follows a large chunk of code which will only be enabled if you
+ * have both the AB3100 chip mounted and the MMC subsystem activated.
+ */
+
+static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
+{
+	int v;
+
+	/*
+	 * MMC Spec:
+	 * bit 7:	1.70 - 1.95V
+	 * bit 8 - 14:	2.0 - 2.6V
+	 * bit 15 - 23:	2.7 - 3.6V
+	 *
+	 * ab3100 voltages:
+	 * 000 - 2.85V
+	 * 001 - 2.75V
+	 * 010 - 1.8V
+	 * 011 - 1.5V
+	 */
+	switch (voltage) {
+	case 8:
+		v = 3;
+		break;
+	case 9:
+	case 10:
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+	case 15:
+		v = 1;
+		break;
+	case 16:
+		v = 1;
+		break;
+	case 17:
+	case 18:
+	case 19:
+	case 20:
+	case 21:
+	case 22:
+	case 23:
+	case 24:
+		v = 0;
+		break;
+	default:
+		v = 0;
+		break;
+	}
+
+	/* PL180 voltage register bits */
+	return v << 2;
+}
+
+
+
+static int mmci_callback(void *data)
+{
+	struct mmci_card_event *mmci_card = data;
+
+	disable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD);
+	schedule_work(&mmci_card->workq);
+
+	return 0;
+}
+
+
+static ssize_t gpio_show(struct device *dev, struct device_attribute *attr,
+		  char *buf)
+{
+	struct mmci_card_event *mmci_card = container_of(
+		dev->platform_data,
+		struct mmci_card_event, mmc0_plat_data);
+
+
+	return sprintf(buf, "%d\n", !mmci_card->mmc_inserted);
+}
+
+static DEVICE_ATTR(mmc_inserted, S_IRUGO, gpio_show, NULL);
+
+static void _mmci_callback(struct work_struct *ws)
+{
+
+	struct mmci_card_event *mmci_card = container_of(
+		ws,
+		struct mmci_card_event, workq);
+
+	mdelay(20);
+
+	mmci_card->mmc_inserted = !!gpio_get_value(U300_GPIO_PIN_MMC_CD);
+
+	input_report_switch(mmci_card->mmc_input, KEY_INSERT,
+			    !mmci_card->mmc_inserted);
+	input_sync(mmci_card->mmc_input);
+
+	pr_debug("MMC/SD card was %s\n",
+		 mmci_card->mmc_inserted ? "removed" : "inserted");
+
+	enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, !mmci_card->mmc_inserted);
+}
+
+int __devinit mmc_init(struct amba_device *adev)
+{
+	struct mmci_card_event *mmci_card;
+	struct device *mmcsd_device = &adev->dev;
+	int ret = 0;
+
+	mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
+	if (!mmci_card)
+		return -ENOMEM;
+
+	/* Nominally 2.85V on our platform */
+	mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
+	mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
+	mmci_card->mmc0_plat_data.status = mmc_status;
+
+	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
+
+	INIT_WORK(&mmci_card->workq, _mmci_callback);
+
+	ret = gpio_request(U300_GPIO_PIN_MMC_CD, "MMC card detection");
+	if (ret) {
+		printk(KERN_CRIT "Could not allocate MMC card detection " \
+		       "GPIO pin\n");
+		goto out;
+	}
+
+	ret = gpio_direction_input(U300_GPIO_PIN_MMC_CD);
+	if (ret) {
+		printk(KERN_CRIT "Invalid GPIO pin requested\n");
+		goto out;
+	}
+
+	ret = sysfs_create_file(&mmcsd_device->kobj,
+			       &dev_attr_mmc_inserted.attr);
+	if (ret)
+		goto out;
+
+	mmci_card->mmc_input = input_allocate_device();
+	if (!mmci_card->mmc_input) {
+		printk(KERN_CRIT "Could not allocate MMC input device\n");
+		return -ENOMEM;
+	}
+
+	mmci_card->mmc_input->name = "MMC insert notification";
+	mmci_card->mmc_input->id.bustype = BUS_HOST;
+	mmci_card->mmc_input->id.vendor = 0;
+	mmci_card->mmc_input->id.product = 0;
+	mmci_card->mmc_input->id.version = 0x0100;
+	mmci_card->mmc_input->dev.parent = mmcsd_device;
+	input_set_capability(mmci_card->mmc_input, EV_SW, KEY_INSERT);
+
+	/*
+	 * Since this must always be compiled into the kernel, this input
+	 * is never unregistered or free:ed.
+	 */
+	ret = input_register_device(mmci_card->mmc_input);
+	if (ret) {
+		input_free_device(mmci_card->mmc_input);
+		goto out;
+	}
+
+	input_set_drvdata(mmci_card->mmc_input, mmci_card);
+
+	ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
+				     mmci_card);
+
+	schedule_work(&mmci_card->workq);
+
+	printk(KERN_INFO "Registered MMC insert/remove notification\n");
+out:
+	return ret;
+}
diff --git a/arch/arm/mach-u300/mmc.h b/arch/arm/mach-u300/mmc.h
new file mode 100644
index 00000000000..92b85125abb
--- /dev/null
+++ b/arch/arm/mach-u300/mmc.h
@@ -0,0 +1,18 @@
+/*
+ *
+ * arch/arm/mach-u300/mmc.h
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#ifndef MMC_H
+#define MMC_H
+
+#include <linux/amba/bus.h>
+
+int __devinit mmc_init(struct amba_device *adev);
+
+#endif
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
new file mode 100644
index 00000000000..f3664564f08
--- /dev/null
+++ b/arch/arm/mach-u300/padmux.c
@@ -0,0 +1,58 @@
+/*
+ *
+ * arch/arm/mach-u300/padmux.c
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 PADMUX functions
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach/u300-regs.h>
+#include <mach/syscon.h>
+
+#include "padmux.h"
+
+/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
+void pmx_set_mission_mode_mmc(void)
+{
+	u16 val;
+
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
+	val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+	val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+}
+
+void pmx_set_mission_mode_spi(void)
+{
+	u16 val;
+
+	/* Set up padmuxing so the SPI port and its chipselects are active */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+	/*
+	 * Activate the SPI port (disable the use of these pins for generic
+	 * GPIO, DSP, AAIF
+	 */
+	val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
+	/*
+	 * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
+	 * things also)
+	 */
+	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
+	/*
+	 * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
+	 * things also)
+	 */
+	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+}
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
new file mode 100644
index 00000000000..8c2099ac504
--- /dev/null
+++ b/arch/arm/mach-u300/padmux.h
@@ -0,0 +1,19 @@
+/*
+ *
+ * arch/arm/mach-u300/padmux.h
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 PADMUX API
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+
+#ifndef __MACH_U300_PADMUX_H
+#define __MACH_U300_PADMUX_H
+
+void pmx_set_mission_mode_mmc(void);
+void pmx_set_mission_mode_spi(void);
+
+#endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
new file mode 100644
index 00000000000..cce53204880
--- /dev/null
+++ b/arch/arm/mach-u300/timer.c
@@ -0,0 +1,422 @@
+/*
+ *
+ * arch/arm/mach-u300/timer.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Timer COH 901 328, runs the OS timer interrupt.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+/* Generic stuff */
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+
+#include "clock.h"
+
+/*
+ * APP side special timer registers
+ * This timer contains four timers which can fire an interrupt each.
+ * OS (operating system) timer @ 32768 Hz
+ * DD (device driver) timer @ 1 kHz
+ * GP1 (general purpose 1) timer @ 1MHz
+ * GP2 (general purpose 2) timer @ 1MHz
+ */
+
+/* Reset OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_ROST					(0x0000)
+#define U300_TIMER_APP_ROST_TIMER_RESET				(0x00000000)
+/* Enable OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_EOST					(0x0004)
+#define U300_TIMER_APP_EOST_TIMER_ENABLE			(0x00000000)
+/* Disable OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_DOST					(0x0008)
+#define U300_TIMER_APP_DOST_TIMER_DISABLE			(0x00000000)
+/* OS Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SOSTM					(0x000c)
+#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT			(0x00000001)
+/* OS Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_OSTS					(0x0010)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_OSTS_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_OSTS_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND			(0x00000080)
+/* OS Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_OSTCC					(0x0014)
+/* OS Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_OSTTC					(0x0018)
+/* OS Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_OSTIE					(0x001c)
+#define U300_TIMER_APP_OSTIE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_OSTIE_IRQ_ENABLE				(0x00000001)
+/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_OSTIA					(0x0020)
+#define U300_TIMER_APP_OSTIA_IRQ_ACK				(0x00000080)
+
+/* Reset DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_RDDT					(0x0040)
+#define U300_TIMER_APP_RDDT_TIMER_RESET				(0x00000000)
+/* Enable DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_EDDT					(0x0044)
+#define U300_TIMER_APP_EDDT_TIMER_ENABLE			(0x00000000)
+/* Disable DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_DDDT					(0x0048)
+#define U300_TIMER_APP_DDDT_TIMER_DISABLE			(0x00000000)
+/* DD Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SDDTM					(0x004c)
+#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT			(0x00000001)
+/* DD Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_DDTS					(0x0050)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_DDTS_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_DDTS_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND			(0x00000080)
+/* DD Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_DDTCC					(0x0054)
+/* DD Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_DDTTC					(0x0058)
+/* DD Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_DDTIE					(0x005c)
+#define U300_TIMER_APP_DDTIE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_DDTIE_IRQ_ENABLE				(0x00000001)
+/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_DDTIA					(0x0060)
+#define U300_TIMER_APP_DDTIA_IRQ_ACK				(0x00000080)
+
+/* Reset GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_RGPT1					(0x0080)
+#define U300_TIMER_APP_RGPT1_TIMER_RESET			(0x00000000)
+/* Enable GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_EGPT1					(0x0084)
+#define U300_TIMER_APP_EGPT1_TIMER_ENABLE			(0x00000000)
+/* Disable GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_DGPT1					(0x0088)
+#define U300_TIMER_APP_DGPT1_TIMER_DISABLE			(0x00000000)
+/* GP1 Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SGPT1M					(0x008c)
+#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT			(0x00000001)
+/* GP1 Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT1S					(0x0090)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_GPT1S_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_GPT1S_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND			(0x00000080)
+/* GP1 Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT1CC					(0x0094)
+/* GP1 Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_GPT1TC					(0x0098)
+/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT1IE					(0x009c)
+#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE			(0x00000001)
+/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT1IA					(0x00a0)
+#define U300_TIMER_APP_GPT1IA_IRQ_ACK				(0x00000080)
+
+/* Reset GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_RGPT2					(0x00c0)
+#define U300_TIMER_APP_RGPT2_TIMER_RESET			(0x00000000)
+/* Enable GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_EGPT2					(0x00c4)
+#define U300_TIMER_APP_EGPT2_TIMER_ENABLE			(0x00000000)
+/* Disable GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_DGPT2					(0x00c8)
+#define U300_TIMER_APP_DGPT2_TIMER_DISABLE			(0x00000000)
+/* GP2 Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SGPT2M					(0x00cc)
+#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT			(0x00000001)
+/* GP2 Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT2S					(0x00d0)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_GPT2S_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_GPT2S_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND			(0x00000080)
+/* GP2 Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT2CC					(0x00d4)
+/* GP2 Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_GPT2TC					(0x00d8)
+/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT2IE					(0x00dc)
+#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE			(0x00000001)
+/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT2IA					(0x00e0)
+#define U300_TIMER_APP_GPT2IA_IRQ_ACK				(0x00000080)
+
+/* Clock request control register - all four timers */
+#define U300_TIMER_APP_CRC					(0x100)
+#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE			(0x00000001)
+
+#define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define US_PER_TICK ((1000000 + (HZ/2)) / HZ)
+
+/*
+ * The u300_set_mode() function is always called first, if we
+ * have oneshot timer active, the oneshot scheduling function
+ * u300_set_next_event() is called immediately after.
+ */
+static void u300_set_mode(enum clock_event_mode mode,
+			  struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* Disable interrupts on GPT1 */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Disable GP1 while we're reprogramming it. */
+		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+		/*
+		 * Set the periodic mode to a certain number of ticks per
+		 * jiffy.
+		 */
+		writel(TICKS_PER_JIFFY,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+		/*
+		 * Set continuous mode, so the timer keeps triggering
+		 * interrupts.
+		 */
+		writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+		/* Enable timer interrupts */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Then enable the OS timer again */
+		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* Just break; here? */
+		/*
+		 * The actual event will be programmed by the next event hook,
+		 * so we just set a dummy value somewhere at the end of the
+		 * universe here.
+		 */
+		/* Disable interrupts on GPT1 */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Disable GP1 while we're reprogramming it. */
+		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+		/*
+		 * Expire far in the future, u300_set_next_event() will be
+		 * called soon...
+		 */
+		writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+		/* We run one shot per tick here! */
+		writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+		/* Enable interrupts for this timer */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Enable timer */
+		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		/* Disable interrupts on GP1 */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Disable GP1 */
+		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		/* Ignore this call */
+		break;
+	}
+}
+
+/*
+ * The app timer in one shot mode obviously has to be reprogrammed
+ * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
+ * the interrupt disable + timer disable commands with a reset command,
+ * it will fail miserably. Apparently (and I found this the hard way)
+ * the timer is very sensitive to the instruction order, though you don't
+ * get that impression from the data sheet.
+ */
+static int u300_set_next_event(unsigned long cycles,
+			       struct clock_event_device *evt)
+
+{
+	/* Disable interrupts on GPT1 */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+	/* Disable GP1 while we're reprogramming it. */
+	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+	/* Reset the General Purpose timer 1. */
+	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+	/* IRQ in n * cycles */
+	writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+	/*
+	 * We run one shot per tick here! (This is necessary to reconfigure,
+	 * the timer will tilt if you don't!)
+	 */
+	writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+	/* Enable timer interrupts */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+	/* Then enable the OS timer again */
+	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+	return 0;
+}
+
+
+/* Use general purpose timer 1 as clock event */
+static struct clock_event_device clockevent_u300_1mhz = {
+	.name           = "GPT1",
+	.rating         = 300, /* Reasonably fast and accurate clock event */
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	/* 22 calculated using the algorithm in arch/mips/kernel/time.c */
+	.shift          = 22,
+	.set_next_event = u300_set_next_event,
+	.set_mode       = u300_set_mode,
+};
+
+/* Clock event timer interrupt handler */
+static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clockevent_u300_1mhz;
+	/* ACK/Clear timer IRQ for the APP GPT1 Timer */
+	writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA);
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction u300_timer_irq = {
+	.name           = "U300 Timer Tick",
+	.flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler        = u300_timer_interrupt,
+};
+
+/* Use general purpose timer 2 as clock source */
+static cycle_t u300_get_cycles(struct clocksource *cs)
+{
+	return (cycles_t) readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
+}
+
+static struct clocksource clocksource_u300_1mhz = {
+	.name           = "GPT2",
+	.rating         = 300, /* Reasonably fast and accurate clock source */
+	.read           = u300_get_cycles,
+	.mask           = CLOCKSOURCE_MASK(32), /* 32 bits */
+	/* 22 calculated using the algorithm in arch/mips/kernel/time.c */
+	.shift          = 22,
+	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+
+/*
+ * This sets up the system timers, clock source and clock event.
+ */
+static void __init u300_timer_init(void)
+{
+	u300_enable_timer_clock();
+	/*
+	 * Disable the "OS" and "DD" timers - these are designed for Symbian!
+	 * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
+	 */
+	writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC);
+	writel(U300_TIMER_APP_ROST_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST);
+	writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST);
+	writel(U300_TIMER_APP_RDDT_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT);
+	writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT);
+
+	/* Reset the General Purpose timer 1. */
+	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+
+	/* Set up the IRQ handler */
+	setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq);
+
+	/* Reset the General Purpose timer 2 */
+	writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2);
+	/* Set this timer to run around forever */
+	writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC);
+	/* Set continuous mode so it wraps around */
+	writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M);
+	/* Disable timer interrupts */
+	writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE);
+	/* Then enable the GP2 timer to use as a free running us counter */
+	writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
+
+	/* This is a pure microsecond clock source */
+	clocksource_u300_1mhz.mult =
+		clocksource_khz2mult(1000, clocksource_u300_1mhz.shift);
+	if (clocksource_register(&clocksource_u300_1mhz))
+		printk(KERN_ERR "timer: failed to initialize clock "
+		       "source %s\n", clocksource_u300_1mhz.name);
+
+	clockevent_u300_1mhz.mult =
+		div_sc(1000000, NSEC_PER_SEC, clockevent_u300_1mhz.shift);
+	/* 32bit counter, so 32bits delta is max */
+	clockevent_u300_1mhz.max_delta_ns =
+		clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
+	/* This timer is slow enough to set for 1 cycle == 1 MHz */
+	clockevent_u300_1mhz.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_u300_1mhz);
+	clockevent_u300_1mhz.cpumask = cpumask_of(0);
+	clockevents_register_device(&clockevent_u300_1mhz);
+	/*
+	 * TODO: init and register the rest of the timers too, they can be
+	 * used by hrtimers!
+	 */
+}
+
+/*
+ * Very simple system timer that only register the clock event and
+ * clock source.
+ */
+struct sys_timer u300_timer = {
+	.init		= u300_timer_init,
+};
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
new file mode 100644
index 00000000000..d2a0b8847a1
--- /dev/null
+++ b/arch/arm/mach-u300/u300.c
@@ -0,0 +1,55 @@
+/*
+ *
+ * arch/arm/mach-u300/u300.c
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Platform machine definition.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/memory.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init u300_init_machine(void)
+{
+	u300_init_devices();
+}
+
+#ifdef CONFIG_MACH_U300_BS2X
+#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS330
+#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS335
+#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS365
+#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board"
+#endif
+
+MACHINE_START(U300, MACH_U300_STRING)
+	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
+	.phys_io	= U300_AHB_PER_PHYS_BASE,
+	.io_pg_offst	= ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= BOOT_PARAMS_OFFSET,
+	.map_io		= u300_map_io,
+	.init_irq	= u300_init_irq,
+	.timer		= &u300_timer,
+	.init_machine	= u300_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index b3bebcc5623..69214fc8bd1 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -116,7 +116,7 @@ void __init versatile_init_irq(void)
 {
 	unsigned int i;
 
-	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0);
+	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
 
 	set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
 
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index 0c0c1d63f1c..d50c94f4dbd 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y				:= irq.o time.o
+obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
 
 # W90X900 CPU support files
 
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
new file mode 100644
index 00000000000..f420613cd39
--- /dev/null
+++ b/arch/arm/mach-w90x900/clock.c
@@ -0,0 +1,77 @@
+/*
+ * linux/arch/arm/mach-w90x900/clock.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (clk->enabled++ == 0)
+		(clk->enable)(clk, 1);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	WARN_ON(clk->enabled == 0);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (--clk->enabled == 0)
+		(clk->enable)(clk, 0);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+void w90x900_clk_enable(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->cken;
+	unsigned long clken;
+
+	clken = __raw_readl(W90X900_VA_CLKPWR);
+
+	if (enable)
+		clken |= clocks;
+	else
+		clken &= ~clocks;
+
+	__raw_writel(clken, W90X900_VA_CLKPWR);
+}
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
new file mode 100644
index 00000000000..4f27bda76d5
--- /dev/null
+++ b/arch/arm/mach-w90x900/clock.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-w90x900/clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <asm/clkdev.h>
+
+void w90x900_clk_enable(struct clk *clk, int enable);
+void clks_register(struct clk_lookup *clks, size_t num);
+
+struct clk {
+	unsigned long		cken;
+	unsigned int		enabled;
+	void			(*enable)(struct clk *, int enable);
+};
+
+#define DEFINE_CLK(_name, _ctrlbit)			\
+struct clk clk_##_name = {				\
+		.enable	= w90x900_clk_enable,		\
+		.cken	= (1 << _ctrlbit),		\
+	}
+
+#define DEF_CLKLOOK(_clk, _devname, _conname)		\
+	{						\
+		.clk		= _clk,			\
+		.dev_id		= _devname,		\
+		.con_id		= _conname,		\
+	}
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index de29ddcb945..57b5dbabeb4 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -41,7 +41,7 @@ struct sys_timer;
 extern void w90x900_init_irq(void);
 extern void w90p910_init_io(struct map_desc *mach_desc, int size);
 extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(int xtal);
+extern void w90p910_init_clocks(void);
 extern void w90p910_map_io(struct map_desc *mach_desc, int size);
 extern struct platform_device w90p910_serial_device;
 extern struct sys_timer w90x900_timer;
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
new file mode 100644
index 00000000000..c72e0dfa182
--- /dev/null
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -0,0 +1,154 @@
+/*
+ * linux/arch/arm/mach-w90p910/gpio.c
+ *
+ * Generic w90p910 GPIO handling
+ *
+ *  Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+
+#define GPIO_BASE 		(W90X900_VA_GPIO)
+#define GPIO_DIR		(0x04)
+#define GPIO_OUT		(0x08)
+#define GPIO_IN			(0x0C)
+#define GROUPINERV		(0x10)
+#define GPIO_GPIO(Nb)		(0x00000001 << (Nb))
+#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+
+#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio)			\
+	{								\
+		.chip = {						\
+			.label		  = name,			\
+			.direction_input  = w90p910_dir_input,		\
+			.direction_output = w90p910_dir_output,		\
+			.get		  = w90p910_gpio_get,		\
+			.set		  = w90p910_gpio_set,		\
+			.base		  = base_gpio,			\
+			.ngpio		  = nr_gpio,			\
+		}							\
+	}
+
+struct w90p910_gpio_chip {
+	struct gpio_chip	chip;
+	void __iomem		*regbase;	/* Base of group register*/
+	spinlock_t 		gpio_lock;
+};
+
+static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+	unsigned int regval;
+
+	regval = __raw_readl(pio);
+	regval &= GPIO_GPIO(offset);
+
+	return (regval != 0);
+}
+
+static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+	unsigned int regval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+	regval = __raw_readl(pio);
+
+	if (val)
+		regval |= GPIO_GPIO(offset);
+	else
+		regval &= ~GPIO_GPIO(offset);
+
+	__raw_writel(regval, pio);
+
+	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+}
+
+static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	unsigned int regval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+	regval = __raw_readl(pio);
+	regval &= ~GPIO_GPIO(offset);
+	__raw_writel(regval, pio);
+
+	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+
+	return 0;
+}
+
+static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	unsigned int regval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+	regval = __raw_readl(pio);
+	regval |= GPIO_GPIO(offset);
+	__raw_writel(regval, pio);
+
+	regval = __raw_readl(outreg);
+
+	if (val)
+		regval |= GPIO_GPIO(offset);
+	else
+		regval &= ~GPIO_GPIO(offset);
+
+	__raw_writel(regval, outreg);
+
+	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+
+	return 0;
+}
+
+static struct w90p910_gpio_chip w90p910_gpio[] = {
+	W90P910_GPIO_CHIP("GROUPC", 0, 16),
+	W90P910_GPIO_CHIP("GROUPD", 16, 10),
+	W90P910_GPIO_CHIP("GROUPE", 26, 14),
+	W90P910_GPIO_CHIP("GROUPF", 40, 10),
+	W90P910_GPIO_CHIP("GROUPG", 50, 17),
+	W90P910_GPIO_CHIP("GROUPH", 67, 8),
+	W90P910_GPIO_CHIP("GROUPI", 75, 17),
+};
+
+void __init w90p910_init_gpio(int nr_group)
+{
+	unsigned	i;
+	struct w90p910_gpio_chip *gpio_chip;
+
+	for (i = 0; i < nr_group; i++) {
+		gpio_chip = &w90p910_gpio[i];
+		spin_lock_init(&gpio_chip->gpio_lock);
+		gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
+		gpiochip_add(&gpio_chip->chip);
+	}
+}
diff --git a/arch/arm/mach-w90x900/include/mach/clkdev.h b/arch/arm/mach-w90x900/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
new file mode 100644
index 00000000000..034da3e390c
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/gpio.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/arm/mach-w90p910/include/mach/gpio.h
+ *
+ * Generic w90p910 GPIO handling
+ *
+ *  Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_W90P910_GPIO_H
+#define __ASM_ARCH_W90P910_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+#endif
diff --git a/arch/arm/mach-w90x900/include/mach/irqs.h b/arch/arm/mach-w90x900/include/mach/irqs.h
index 1c583f9cbcd..9d5cba3a509 100644
--- a/arch/arm/mach-w90x900/include/mach/irqs.h
+++ b/arch/arm/mach-w90x900/include/mach/irqs.h
@@ -1,8 +1,7 @@
 /*
  * arch/arm/mach-w90x900/include/mach/irqs.h
  *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -10,8 +9,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -31,6 +29,11 @@
 /* Main cpu interrupts */
 
 #define IRQ_WDT		W90X900_IRQ(1)
+#define IRQ_GROUP0	W90X900_IRQ(2)
+#define IRQ_GROUP1	W90X900_IRQ(3)
+#define IRQ_ACTL	W90X900_IRQ(4)
+#define IRQ_LCD		W90X900_IRQ(5)
+#define IRQ_RTC		W90X900_IRQ(6)
 #define IRQ_UART0	W90X900_IRQ(7)
 #define IRQ_UART1	W90X900_IRQ(8)
 #define IRQ_UART2	W90X900_IRQ(9)
@@ -39,7 +42,45 @@
 #define IRQ_TIMER0	W90X900_IRQ(12)
 #define IRQ_TIMER1	W90X900_IRQ(13)
 #define IRQ_T_INT_GROUP	W90X900_IRQ(14)
+#define IRQ_USBH	W90X900_IRQ(15)
+#define IRQ_EMCTX	W90X900_IRQ(16)
+#define IRQ_EMCRX	W90X900_IRQ(17)
+#define IRQ_GDMAGROUP	W90X900_IRQ(18)
+#define IRQ_DMAC	W90X900_IRQ(19)
+#define IRQ_FMI		W90X900_IRQ(20)
+#define IRQ_USBD	W90X900_IRQ(21)
+#define IRQ_ATAPI	W90X900_IRQ(22)
+#define IRQ_G2D		W90X900_IRQ(23)
+#define IRQ_PCI		W90X900_IRQ(24)
+#define IRQ_SCGROUP	W90X900_IRQ(25)
+#define IRQ_I2CGROUP	W90X900_IRQ(26)
+#define IRQ_SSP		W90X900_IRQ(27)
+#define IRQ_PWM		W90X900_IRQ(28)
+#define IRQ_KPI		W90X900_IRQ(29)
+#define IRQ_P2SGROUP	W90X900_IRQ(30)
 #define IRQ_ADC		W90X900_IRQ(31)
 #define NR_IRQS		(IRQ_ADC+1)
 
+/*for irq group*/
+
+#define	IRQ_PS2_PORT0	0x10000000
+#define	IRQ_PS2_PORT1	0x20000000
+#define	IRQ_I2C_LINE0	0x04000000
+#define	IRQ_I2C_LINE1	0x08000000
+#define	IRQ_SC_CARD0	0x01000000
+#define	IRQ_SC_CARD1	0x02000000
+#define	IRQ_GDMA_CH0	0x00100000
+#define	IRQ_GDMA_CH1	0x00200000
+#define	IRQ_TIMER2	0x00010000
+#define	IRQ_TIMER3	0x00020000
+#define	IRQ_TIMER4	0x00040000
+#define	IRQ_GROUP0_IRQ0	0x00000001
+#define	IRQ_GROUP0_IRQ1	0x00000002
+#define	IRQ_GROUP0_IRQ2	0x00000004
+#define	IRQ_GROUP0_IRQ3	0x00000008
+#define	IRQ_GROUP1_IRQ4	0x00000010
+#define	IRQ_GROUP1_IRQ5	0x00000020
+#define	IRQ_GROUP1_IRQ6	0x00000040
+#define	IRQ_GROUP1_IRQ7	0x00000080
+
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-w90x900/include/mach/map.h b/arch/arm/mach-w90x900/include/mach/map.h
index 79320ebe614..1a209530411 100644
--- a/arch/arm/mach-w90x900/include/mach/map.h
+++ b/arch/arm/mach-w90x900/include/mach/map.h
@@ -1,8 +1,7 @@
 /*
  * arch/arm/mach-w90x900/include/mach/map.h
  *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -10,8 +9,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -34,7 +32,6 @@
  * interrupt controller is the first thing we put in, to make
  * the assembly code for the irq detection easier
  */
-
 #define W90X900_VA_IRQ		W90X900_ADDR(0x00000000)
 #define W90X900_PA_IRQ		(0xB8002000)
 #define W90X900_SZ_IRQ		SZ_4K
@@ -44,33 +41,117 @@
 #define W90X900_SZ_GCR		SZ_4K
 
 /* Clock and Power management */
-
 #define W90X900_VA_CLKPWR	(W90X900_VA_GCR+0x200)
 #define W90X900_PA_CLKPWR	(0xB0000200)
 #define W90X900_SZ_CLKPWR	SZ_4K
 
 /* EBI management */
-
 #define W90X900_VA_EBI		W90X900_ADDR(0x00001000)
 #define W90X900_PA_EBI		(0xB0001000)
 #define W90X900_SZ_EBI		SZ_4K
 
 /* UARTs */
-
 #define W90X900_VA_UART		W90X900_ADDR(0x08000000)
 #define W90X900_PA_UART		(0xB8000000)
 #define W90X900_SZ_UART		SZ_4K
 
 /* Timers */
-
 #define W90X900_VA_TIMER	W90X900_ADDR(0x08001000)
 #define W90X900_PA_TIMER	(0xB8001000)
 #define W90X900_SZ_TIMER	SZ_4K
 
 /* GPIO ports */
-
 #define W90X900_VA_GPIO		W90X900_ADDR(0x08003000)
 #define W90X900_PA_GPIO		(0xB8003000)
 #define W90X900_SZ_GPIO		SZ_4K
 
+/* GDMA control */
+#define W90X900_VA_GDMA		W90X900_ADDR(0x00004000)
+#define W90X900_PA_GDMA		(0xB0004000)
+#define W90X900_SZ_GDMA		SZ_4K
+
+/* USB host controller*/
+#define W90X900_VA_USBEHCIHOST	W90X900_ADDR(0x00005000)
+#define W90X900_PA_USBEHCIHOST	(0xB0005000)
+#define W90X900_SZ_USBEHCIHOST	SZ_4K
+
+#define W90X900_VA_USBOHCIHOST	W90X900_ADDR(0x00007000)
+#define W90X900_PA_USBOHCIHOST	(0xB0007000)
+#define W90X900_SZ_USBOHCIHOST	SZ_4K
+
+/* I2C hardware controller */
+#define W90X900_VA_I2C		W90X900_ADDR(0x08006000)
+#define W90X900_PA_I2C		(0xB8006000)
+#define W90X900_SZ_I2C		SZ_4K
+
+/* Keypad Interface*/
+#define W90X900_VA_KPI		W90X900_ADDR(0x08008000)
+#define W90X900_PA_KPI		(0xB8008000)
+#define W90X900_SZ_KPI		SZ_4K
+
+/* Smart card host*/
+#define W90X900_VA_SC		W90X900_ADDR(0x08005000)
+#define W90X900_PA_SC		(0xB8005000)
+#define W90X900_SZ_SC		SZ_4K
+
+/* LCD controller*/
+#define W90X900_VA_LCD		W90X900_ADDR(0x00008000)
+#define W90X900_PA_LCD		(0xB0008000)
+#define W90X900_SZ_LCD		SZ_4K
+
+/* 2D controller*/
+#define W90X900_VA_GE		W90X900_ADDR(0x0000B000)
+#define W90X900_PA_GE		(0xB000B000)
+#define W90X900_SZ_GE		SZ_4K
+
+/* ATAPI */
+#define W90X900_VA_ATAPI	W90X900_ADDR(0x0000A000)
+#define W90X900_PA_ATAPI	(0xB000A000)
+#define W90X900_SZ_ATAPI	SZ_4K
+
+/* ADC */
+#define W90X900_VA_ADC		W90X900_ADDR(0x0800A000)
+#define W90X900_PA_ADC		(0xB800A000)
+#define W90X900_SZ_ADC		SZ_4K
+
+/* PS2 Interface*/
+#define W90X900_VA_PS2		W90X900_ADDR(0x08009000)
+#define W90X900_PA_PS2		(0xB8009000)
+#define W90X900_SZ_PS2		SZ_4K
+
+/* RTC */
+#define W90X900_VA_RTC		W90X900_ADDR(0x08004000)
+#define W90X900_PA_RTC		(0xB8004000)
+#define W90X900_SZ_RTC		SZ_4K
+
+/* Pulse Width Modulation(PWM) Registers */
+#define W90X900_VA_PWM		W90X900_ADDR(0x08007000)
+#define W90X900_PA_PWM		(0xB8007000)
+#define W90X900_SZ_PWM		SZ_4K
+
+/* Audio Controller controller */
+#define W90X900_VA_ACTL		W90X900_ADDR(0x00009000)
+#define W90X900_PA_ACTL		(0xB0009000)
+#define W90X900_SZ_ACTL		SZ_4K
+
+/* DMA controller */
+#define W90X900_VA_DMA		W90X900_ADDR(0x0000c000)
+#define W90X900_PA_DMA		(0xB000c000)
+#define W90X900_SZ_DMA		SZ_4K
+
+/* FMI controller */
+#define W90X900_VA_FMI		W90X900_ADDR(0x0000d000)
+#define W90X900_PA_FMI		(0xB000d000)
+#define W90X900_SZ_FMI		SZ_4K
+
+/* USB Device port */
+#define W90X900_VA_USBDEV	W90X900_ADDR(0x00006000)
+#define W90X900_PA_USBDEV	(0xB0006000)
+#define W90X900_SZ_USBDEV	SZ_4K
+
+/* External MAC control*/
+#define W90X900_VA_EMC		W90X900_ADDR(0x00003000)
+#define W90X900_PA_EMC		(0xB0003000)
+#define W90X900_SZ_EMC		SZ_4K
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
new file mode 100644
index 00000000000..f10b6a8dc06
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H
+
+/* Clock Control Registers  */
+#define CLK_BA		W90X900_VA_CLKPWR
+#define REG_CLKEN	(CLK_BA + 0x00)
+#define REG_CLKSEL	(CLK_BA + 0x04)
+#define REG_CLKDIV	(CLK_BA + 0x08)
+#define REG_PLLCON0	(CLK_BA + 0x0C)
+#define REG_PLLCON1	(CLK_BA + 0x10)
+#define REG_PMCON	(CLK_BA + 0x14)
+#define REG_IRQWAKECON	(CLK_BA + 0x18)
+#define REG_IRQWAKEFLAG	(CLK_BA + 0x1C)
+#define REG_IPSRST	(CLK_BA + 0x20)
+#define REG_CLKEN1	(CLK_BA + 0x24)
+#define REG_CLKDIV1	(CLK_BA + 0x28)
+
+#endif /*  __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-usb.h b/arch/arm/mach-w90x900/include/mach/regs-usb.h
new file mode 100644
index 00000000000..ab74b0c2480
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-usb.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-usb.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_USB_H
+#define __ASM_ARCH_REGS_USB_H
+
+/* usb Control Registers  */
+#define USBH_BA		W90X900_VA_USBEHCIHOST
+#define USBD_BA		W90X900_VA_USBDEV
+#define USBO_BA		W90X900_VA_USBOHCIHOST
+
+/* USB Host Control Registers */
+#define REG_UPSCR0	(USBH_BA+0x064)
+#define REG_UPSCR1	(USBH_BA+0x068)
+#define REG_USBPCR0	(USBH_BA+0x0C4)
+#define REG_USBPCR1	(USBH_BA+0x0C8)
+
+/* USBH OHCI Control Registers */
+#define REG_OpModEn	(USBO_BA+0x204)
+/*This bit controls the polarity of over
+*current flag from external power IC.
+*/
+#define OCALow		0x08
+
+#endif /*  __ASM_ARCH_REGS_USB_H */
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 726ff6798a5..7a62bd348e8 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -3,15 +3,13 @@
  *
  * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
  *
- * Copyright (C) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (C) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * published by the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -80,6 +78,156 @@ static struct platform_device w90p910_flash_device = {
 	.num_resources	=	ARRAY_SIZE(w90p910_flash_resources),
 };
 
+/* USB EHCI Host Controller */
+
+static struct resource w90x900_usb_ehci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBEHCIHOST,
+		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+struct platform_device w90x900_device_usb_ehci = {
+	.name		  = "w90x900-ehci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(w90x900_usb_ehci_resource),
+	.resource	  = w90x900_usb_ehci_resource,
+	.dev              = {
+		.dma_mask = &w90x900_device_usb_ehci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+EXPORT_SYMBOL(w90x900_device_usb_ehci);
+
+/* USB OHCI Host Controller */
+
+static struct resource w90x900_usb_ohci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBOHCIHOST,
+		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
+struct platform_device w90x900_device_usb_ohci = {
+	.name		  = "w90x900-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(w90x900_usb_ohci_resource),
+	.resource	  = w90x900_usb_ohci_resource,
+	.dev              = {
+		.dma_mask = &w90x900_device_usb_ohci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+EXPORT_SYMBOL(w90x900_device_usb_ohci);
+
+/*TouchScreen controller*/
+
+static struct resource w90x900_ts_resource[] = {
+	[0] = {
+		.start = W90X900_PA_ADC,
+		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device w90x900_device_ts = {
+	.name		= "w90x900-ts",
+	.id		= -1,
+	.resource	= w90x900_ts_resource,
+	.num_resources	= ARRAY_SIZE(w90x900_ts_resource),
+};
+EXPORT_SYMBOL(w90x900_device_ts);
+
+/* RTC controller*/
+
+static struct resource w90x900_rtc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_RTC,
+		.end   = W90X900_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC,
+		.end   = IRQ_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device w90x900_device_rtc = {
+	.name		= "w90x900-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_rtc_resource),
+	.resource	= w90x900_rtc_resource,
+};
+EXPORT_SYMBOL(w90x900_device_rtc);
+
+/* KPI controller*/
+
+static struct resource w90x900_kpi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_KPI,
+		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_KPI,
+		.end   = IRQ_KPI,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device w90x900_device_kpi = {
+	.name		= "w90x900-kpi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_kpi_resource),
+	.resource	= w90x900_kpi_resource,
+};
+EXPORT_SYMBOL(w90x900_device_kpi);
+
+/* USB Device (Gadget)*/
+
+static struct resource w90x900_usbgadget_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBDEV,
+		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBD,
+		.end   = IRQ_USBD,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device w90x900_device_usbgadget = {
+	.name		= "w90x900-usbgadget",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_usbgadget_resource),
+	.resource	= w90x900_usbgadget_resource,
+};
+EXPORT_SYMBOL(w90x900_device_usbgadget);
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -88,12 +236,18 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90p910_serial_device,
 	&w90p910_flash_device,
+	&w90x900_device_usb_ehci,
+	&w90x900_device_usb_ohci,
+	&w90x900_device_ts,
+	&w90x900_device_rtc,
+	&w90x900_device_kpi,
+	&w90x900_device_usbgadget,
 };
 
 static void __init w90p910evb_map_io(void)
 {
 	w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-	w90p910_init_clocks(0);
+	w90p910_init_clocks();
 }
 
 static void __init w90p910evb_init(void)
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
new file mode 100644
index 00000000000..a3520fefb5e
--- /dev/null
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -0,0 +1,116 @@
+/*
+ * linux/arch/arm/mach-w90x900/mfp-w90p910.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
+
+#define GPSELF		(0x01 << 1)
+
+#define GPSELC		(0x03 << 2)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
+
+#define GPSELEI0	(0x01 << 26)
+#define GPSELEI1	(0x01 << 27)
+
+static DECLARE_MUTEX(mfp_sem);
+
+void mfp_set_groupf(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-emc") == 0)
+		mfpen |= GPSELF;/*enable mac*/
+	else
+		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-lcd") == 0)
+		mfpen |= GPSELC;/*enable lcd*/
+	else if (strcmp(dev_id, "w90p910-kpi") == 0) {
+			mfpen &= (~GPSELC);/*enable kpi*/
+			mfpen |= ENKPI;
+		} else if (strcmp(dev_id, "w90p910-nand") == 0) {
+				mfpen &= (~GPSELC);/*enable nand*/
+				mfpen |= ENNAND;
+			} else
+				mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev, int gpio)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-wdog") == 0)
+		mfpen |= GPSELEI1;/*enable wdog*/
+		else if (strcmp(dev_id, "w90p910-atapi") == 0)
+			mfpen |= GPSELEI0;/*enable atapi*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 2bcbaa681b9..1c97e4930b7 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -3,8 +3,7 @@
  *
  * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
  *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -12,8 +11,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -36,6 +34,7 @@
 #include <mach/regs-serial.h>
 
 #include "cpu.h"
+#include "clock.h"
 
 /* Initial IO mappings */
 
@@ -45,9 +44,52 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 	IODESC_ENT(UART),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(EBI),
+	IODESC_ENT(USBEHCIHOST),
+	IODESC_ENT(USBOHCIHOST),
+	IODESC_ENT(ADC),
+	IODESC_ENT(RTC),
+	IODESC_ENT(KPI),
+	IODESC_ENT(USBDEV),
 	/*IODESC_ENT(LCD),*/
 };
 
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+
+static struct clk_lookup w90p910_clkregs[] = {
+	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
+	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
+	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
+	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
+	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
+	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
+	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
+	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
+	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
+	DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
+	DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
+	DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
+	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
+	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
+	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
+	DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
+};
+
 /* Initial serial platform data */
 
 struct plat_serial8250_port w90p910_uart_data[] = {
@@ -77,8 +119,9 @@ void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
 
 /*Init W90P910 clock*/
 
-void __init w90p910_init_clocks(int xtal)
+void __init w90p910_init_clocks(void)
 {
+	clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
 }
 
 static int __init w90p910_init_cpu(void)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 20979564e7e..83c025e72ce 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -391,7 +391,7 @@ config CPU_FEROCEON_OLD_ID
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_NOIFAR
@@ -416,7 +416,7 @@ config CPU_32v6K
 
 # ARMv7
 config CPU_V7
-	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
@@ -639,10 +639,23 @@ config CPU_BIG_ENDIAN
 	  port must properly enable any big-endian related features
 	  of your chipset/board/processor.
 
+config CPU_ENDIAN_BE8
+	bool
+	depends on CPU_BIG_ENDIAN
+	default CPU_V6 || CPU_V7
+	help
+	  Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
+
+config CPU_ENDIAN_BE32
+	bool
+	depends on CPU_BIG_ENDIAN
+	default !CPU_ENDIAN_BE8
+	help
+	  Support for the BE-32 (big-endian) mode on pre-ARMv6 processors.
+
 config CPU_HIGH_VECTOR
 	depends on !MMU && CPU_CP15 && !CPU_ARM740T
 	bool "Select the High exception vector"
-	default n
 	help
 	  Say Y here to select high exception vector(0xFFFF0000~).
 	  The exception vector can be vary depending on the platform
@@ -726,7 +739,6 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 
 config OUTER_CACHE
 	bool
-	default n
 
 config CACHE_FEROCEON_L2
 	bool "Enable the Feroceon L2 cache controller"
@@ -739,7 +751,6 @@ config CACHE_FEROCEON_L2
 config CACHE_FEROCEON_L2_WRITETHROUGH
 	bool "Force Feroceon L2 cache write through"
 	depends on CACHE_FEROCEON_L2
-	default n
 	help
 	  Say Y here to use the Feroceon L2 cache in writethrough mode.
 	  Unless you specifically require this, say N for writeback mode.
@@ -747,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31
+		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
 	default y
 	select OUTER_CACHE
 	help
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 6f7e70907e4..f332df7f0d3 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -37,6 +37,9 @@ ENTRY(v6_early_abort)
 	movne	pc, lr
 	do_thumb_abort
 	ldreq	r3, [r2]			@ read aborted ARM instruction
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	reveq	r3, r3
+#endif
 	do_ldrd_abort
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 9f88dd3be60..0ab75c60f7c 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -110,6 +110,12 @@ static int remap_area_pages(unsigned long start, unsigned long pfn,
 	return err;
 }
 
+int ioremap_page(unsigned long virt, unsigned long phys,
+		 const struct mem_type *mtype)
+{
+	return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype);
+}
+EXPORT_SYMBOL(ioremap_page);
 
 void __check_kvm_seq(struct mm_struct *mm)
 {
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e6344ece00c..fdaa9bb87c1 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -255,6 +255,7 @@ const struct mem_type *get_mem_type(unsigned int type)
 {
 	return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
 }
+EXPORT_SYMBOL(get_mem_type);
 
 /*
  * Adjust the PMD section entries according to the CPU in use.
@@ -839,6 +840,20 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 		reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
 				BOOTMEM_EXCLUSIVE);
 
+	/*
+	 * U300 - This platform family can share physical memory
+	 * between two ARM cpus, one running Linux and the other
+	 * running another OS.
+	 */
+	if (machine_is_u300()) {
+#ifdef CONFIG_MACH_U300_SINGLE_RAM
+#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) &&	\
+	CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+		res_size = 0x00100000;
+#endif
+#endif
+	}
+
 #ifdef CONFIG_SA1111
 	/*
 	 * Because of the SA1111 DMA bug, we want to preserve our
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 087e239704d..524ddae9259 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -170,6 +170,9 @@ __v6_setup:
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
 	ldmia	r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	orr	r6, r6, #1 << 25		@ big-endian page tables
+#endif
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index a08d9d2380d..180a08d03a0 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -19,17 +19,23 @@
 
 #include "proc-macros.S"
 
-#define TTB_C		(1 << 0)
 #define TTB_S		(1 << 1)
 #define TTB_RGN_NC	(0 << 3)
 #define TTB_RGN_OC_WBWA	(1 << 3)
 #define TTB_RGN_OC_WT	(2 << 3)
 #define TTB_RGN_OC_WB	(3 << 3)
+#define TTB_NOS		(1 << 5)
+#define TTB_IRGN_NC	((0 << 0) | (0 << 6))
+#define TTB_IRGN_WBWA	((0 << 0) | (1 << 6))
+#define TTB_IRGN_WT	((1 << 0) | (0 << 6))
+#define TTB_IRGN_WB	((1 << 0) | (1 << 6))
 
 #ifndef CONFIG_SMP
-#define TTB_FLAGS	TTB_C|TTB_RGN_OC_WB		@ mark PTWs cacheable, outer WB
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS	TTB_IRGN_WB|TTB_RGN_OC_WB
 #else
-#define TTB_FLAGS	TTB_C|TTB_S|TTB_RGN_OC_WBWA	@ mark PTWs cacheable and shared, outer WBWA
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
 #endif
 
 ENTRY(cpu_v7_proc_init)
@@ -176,8 +182,8 @@ cpu_v7_name:
  */
 __v7_setup:
 #ifdef CONFIG_SMP
-	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode
-	orr	r0, r0, #(0x1 << 6)
+	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode and
+	orr	r0, r0, #(1 << 6) | (1 << 0)	@ TLB ops broadcasting
 	mcr	p15, 0, r0, c1, c0, 1
 #endif
 	adr	r12, __v7_setup_stack		@ the local stack
@@ -227,12 +233,43 @@ __v7_setup:
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
 #endif
-	ldr	r5, =0xff0aa1a8
-	ldr	r6, =0x40e040e0
+	/*
+	 * Memory region attributes with SCTLR.TRE=1
+	 *
+	 *   n = TEX[0],C,B
+	 *   TR = PRRR[2n+1:2n]		- memory type
+	 *   IR = NMRR[2n+1:2n]		- inner cacheable property
+	 *   OR = NMRR[2n+17:2n+16]	- outer cacheable property
+	 *
+	 *			n	TR	IR	OR
+	 *   UNCACHED		000	00
+	 *   BUFFERABLE		001	10	00	00
+	 *   WRITETHROUGH	010	10	10	10
+	 *   WRITEBACK		011	10	11	11
+	 *   reserved		110
+	 *   WRITEALLOC		111	10	01	01
+	 *   DEV_SHARED		100	01
+	 *   DEV_NONSHARED	100	01
+	 *   DEV_WC		001	10
+	 *   DEV_CACHED		011	10
+	 *
+	 * Other attributes:
+	 *
+	 *   DS0 = PRRR[16] = 0		- device shareable property
+	 *   DS1 = PRRR[17] = 1		- device shareable property
+	 *   NS0 = PRRR[18] = 0		- normal shareable property
+	 *   NS1 = PRRR[19] = 1		- normal shareable property
+	 *   NOS = PRRR[24+n] = 1	- not outer shareable
+	 */
+	ldr	r5, =0xff0a81a8			@ PRRR
+	ldr	r6, =0x40e040e0			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	orr	r6, r6, #1 << 25		@ big-endian page tables
+#endif
    	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
@@ -240,14 +277,14 @@ __v7_setup:
 ENDPROC(__v7_setup)
 
 	/*   AT
-	 *  TFR   EV X F   I D LR
-	 * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM
+	 *  TFR   EV X F   I D LR    S
+	 * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
 	 * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
-	 *    1    0 110       0011 1.00 .111 1101 < we want
+	 *    1    0 110       0011 1100 .111 1101 < we want
 	 */
 	.type	v7_crval, #object
 v7_crval:
-	crval	clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c
+	crval	clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
 
 __v7_setup_stack:
 	.space	4 * 11				@ 11 registers
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index b637e7380ab..a26a605b73b 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -42,9 +42,11 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	mov	r1, r1, lsl #PAGE_SHIFT
 	vma_vm_flags r2, r2			@ get vma->vm_flags
 1:
-	mcr	p15, 0, r0, c8, c6, 1		@ TLB invalidate D MVA (was 1)
-	tst	r2, #VM_EXEC			@ Executable area ?
-	mcrne	p15, 0, r0, c8, c5, 1		@ TLB invalidate I MVA (was 1)
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable) 
+#else
+	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate U MVA
+#endif
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
@@ -69,8 +71,11 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	mov	r0, r0, lsl #PAGE_SHIFT
 	mov	r1, r1, lsl #PAGE_SHIFT
 1:
-	mcr	p15, 0, r0, c8, c6, 1		@ TLB invalidate D MVA
-	mcr	p15, 0, r0, c8, c5, 1		@ TLB invalidate I MVA
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable)
+#else
+	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate U MVA
+#endif
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
@@ -87,5 +92,5 @@ ENDPROC(v7wbi_flush_kern_tlb_range)
 ENTRY(v7wbi_tlb_fns)
 	.long	v7wbi_flush_user_tlb_range
 	.long	v7wbi_flush_kern_tlb_range
-	.long	v6wbi_tlb_flags
+	.long	v7wbi_tlb_flags
 	.size	v7wbi_tlb_fns, . - v7wbi_tlb_fns
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 853d42bb868..4ce0f9801e2 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -41,6 +41,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
+#include <mach/board-eb.h>
 #include <asm/system.h>
 
 #include "op_counter.h"
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 17d0e9906d5..8986b741223 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -48,7 +48,14 @@ config MXC_IRQ_PRIOR
 config MXC_PWM
 	tristate "Enable PWM driver"
 	depends on ARCH_MXC
+	select HAVE_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config ARCH_HAS_RNGA
+	bool
+	depends on ARCH_MXC
+
+config ARCH_MXC_IOMUX_V3
+	bool
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 055406312b6..e3212c8ff42 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -7,4 +7,5 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
 obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 89e95798cc3..7506d963be4 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -64,6 +64,8 @@ static void gpio_unmask_irq(u32 irq)
 	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
 }
 
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
+
 static int gpio_set_irq_type(u32 irq, u32 type)
 {
 	u32 gpio = irq_to_gpio(irq);
@@ -72,6 +74,7 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	int edge;
 	void __iomem *reg = port->base;
 
+	port->both_edges &= ~(1 << (gpio & 31));
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
 		edge = GPIO_INT_RISE_EDGE;
@@ -79,13 +82,24 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	case IRQ_TYPE_EDGE_FALLING:
 		edge = GPIO_INT_FALL_EDGE;
 		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		val = mxc_gpio_get(&port->chip, gpio & 31);
+		if (val) {
+			edge = GPIO_INT_LOW_LEV;
+			pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+		} else {
+			edge = GPIO_INT_HIGH_LEV;
+			pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+		}
+		port->both_edges |= 1 << (gpio & 31);
+		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		edge = GPIO_INT_LOW_LEV;
 		break;
 	case IRQ_TYPE_LEVEL_HIGH:
 		edge = GPIO_INT_HIGH_LEV;
 		break;
-	default:	/* this includes IRQ_TYPE_EDGE_BOTH */
+	default:
 		return -EINVAL;
 	}
 
@@ -98,6 +112,34 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	return 0;
 }
 
+static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
+{
+	void __iomem *reg = port->base;
+	u32 bit, val;
+	int edge;
+
+	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+	bit = gpio & 0xf;
+	val = __raw_readl(reg);
+	edge = (val >> (bit << 1)) & 3;
+	val &= ~(0x3 << (bit << 1));
+	switch (edge) {
+	case GPIO_INT_HIGH_LEV:
+		edge = GPIO_INT_LOW_LEV;
+		pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
+		break;
+	case GPIO_INT_LOW_LEV:
+		edge = GPIO_INT_HIGH_LEV;
+		pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
+		break;
+	default:
+		pr_err("mxc: invalid configuration for GPIO %d: %x\n",
+		       gpio, edge);
+		return;
+	}
+	__raw_writel(val | (edge << (bit << 1)), reg);
+}
+
 /* handle n interrupts in one status register */
 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 {
@@ -105,11 +147,16 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 
 	gpio_irq_no = port->virtual_irq_start;
 	for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+		u32 gpio = irq_to_gpio(gpio_irq_no);
 
 		if ((irq_stat & 1) == 0)
 			continue;
 
 		BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+
+		if (port->both_edges & (1 << (gpio & 31)))
+			mxc_flip_edge(port, gpio);
+
 		irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
 				&irq_desc[gpio_irq_no]);
 	}
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
new file mode 100644
index 00000000000..8769e910e55
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
+ * All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+
+#include <mach/hardware.h>
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
new file mode 100644
index 00000000000..06701df74c4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+
+/*
+ * MXC UART EVB board level configurations
+ */
+#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR   0xF5000000
+#define MX21ADS_MMIO_SIZE        SZ_16M
+
+#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
+		(MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP        0x0001 /* read */
+#define MX21ADS_IO_TP6          0x0001 /* write */
+#define MX21ADS_IO_SW_SEL       0x0002 /* read */
+#define MX21ADS_IO_TP7          0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE   0x0008
+#define MX21ADS_IO_CSI_CTL2     0x0010
+#define MX21ADS_IO_CSI_CTL1     0x0020
+#define MX21ADS_IO_CSI_CTL0     0x0040
+#define MX21ADS_IO_UART1_EN     0x0080
+#define MX21ADS_IO_UART4_EN     0x0100
+#define MX21ADS_IO_LCDON        0x0200
+#define MX21ADS_IO_IRDA_EN      0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B   0x1000
+#define MX21ADS_IO_IRDA_MD1     0x2000
+#define MX21ADS_IO_LED4_ON      0x4000
+#define MX21ADS_IO_LED3_ON      0x8000
+
+#endif				/* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
new file mode 100644
index 00000000000..a870f8ea244
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
new file mode 100644
index 00000000000..552b55d714d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 318c72ada13..06e6895f7f6 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,7 +114,7 @@
 
 #define MXC_MAX_EXP_IO_LINES	16
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
new file mode 100644
index 00000000000..78cf31e22e4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ *   Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+
+enum mx31lilly_boards {
+	MX31LILLY_NOBOARD	= 0,
+	MX31LILLY_DB		= 1,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31lilly_db_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index e4e5cf5ad7d..52fbdf2d6f2 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,28 +11,8 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 
-#define MXC_MAX_EXP_IO_LINES	16
-
-
-/*
- * Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE		SZ_128M
-/*
- * Size of MBX buffer memory
- */
-#define MXC_MBX_MEM_SIZE	SZ_16M
-/*
- * Size of memory available to kernel
- */
-#define MEM_SIZE		(SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
-
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index f8aef1babb7..303fd2434a2 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 2b6b316d0f5..519bab3eb28 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,9 +11,54 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR		CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
+
+/* LED switchs */
+#define CPLD_LED_REG			(CPLD_ADDR + 0x00)
+/* buttons */
+#define CPLD_SWITCH_BUTTONS_REG	(EXPIO_ADDR + 0x08)
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
+/* module reset register */
+#define CPLD_MODULE_RESET_REG		(CPLD_ADDR + 0x60)
+/* CPU ID and Personality ID */
+#define CPLD_MCU_BOARD_ID_REG		(CPLD_ADDR + 0x68)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_XUART_A	(MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_XUART_B	(MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_BUTTON_A	(MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_BUTTON_B	(MXC_EXP_IO_BASE + 4)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
 #endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
new file mode 100644
index 00000000000..1111037d6d9
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index 82232ba3c8f..f0a1fa1938a 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
 #define __ASM_ARCH_MXC_BOARD_PCM037_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 750c62afd90..4fcd7499e09 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
 #define __ASM_ARCH_MXC_BOARD_PCM038_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
new file mode 100644
index 00000000000..15fbdf16abc
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
+#define __ASM_ARCH_MXC_BOARD_PCM043_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 4ff762dd45c..04033ec637d 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
 #define __ASM_ARCH_MXC_BOARD_QONG_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index b2f9b72644d..02c3cd004db 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -14,7 +14,11 @@
 struct platform_device;
 struct clk;
 
-extern void mxc_map_io(void);
+extern void mx1_map_io(void);
+extern void mx21_map_io(void);
+extern void mx27_map_io(void);
+extern void mx31_map_io(void);
+extern void mx35_map_io(void);
 extern void mxc_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk);
 extern int mx1_clocks_init(unsigned long fref);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 4f773148bc2..bbc5f6753cf 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -25,6 +25,9 @@
 #ifdef CONFIG_MACH_MX27ADS
 #include <mach/board-mx27ads.h>
 #endif
+#ifdef CONFIG_MACH_MX21ADS
+#include <mach/board-mx21ads.h>
+#endif
 #ifdef CONFIG_MACH_PCM038
 #include <mach/board-pcm038.h>
 #endif
@@ -34,6 +37,21 @@
 #ifdef CONFIG_MACH_QONG
 #include <mach/board-qong.h>
 #endif
+#ifdef CONFIG_MACH_PCM043
+#include <mach/board-pcm043.h>
+#endif
+#ifdef CONFIG_MACH_MX27_3DS
+#include <mach/board-mx27pdk.h>
+#endif
+#ifdef CONFIG_MACH_ARMADILLO5X0
+#include <mach/board-armadillo5x0.h>
+#endif
+#ifdef CONFIG_MACH_MX35_3DS
+#include <mach/board-mx35pdk.h>
+#endif
+#ifdef CONFIG_MACH_MX27LITE
+#include <mach/board-mx27lite.h>
+#endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index ea509f1090f..894d2f87c85 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -35,6 +35,7 @@ struct mxc_gpio_port {
 	int irq;
 	int virtual_irq_start;
 	struct gpio_chip chip;
+	u32 both_edges;
 };
 
 int mxc_gpio_init(struct mxc_gpio_port*, int);
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index f9bd17dd8dd..4adec9b154d 100644
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -24,7 +24,7 @@
 
 struct imxuart_platform_data {
 	int (*init)(struct platform_device *pdev);
-	int (*exit)(struct platform_device *pdev);
+	void (*exit)(struct platform_device *pdev);
 	unsigned int flags;
 	void (*irda_enable)(int enable);
 	unsigned int irda_inv_rx:1;
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 762a7b0430e..9f0101157ec 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -76,8 +76,8 @@ struct imx_fb_platform_data {
 	u_char * fixed_screen_cpu;
 	dma_addr_t fixed_screen_dma;
 
-	int (*init)(struct platform_device*);
-	int (*exit)(struct platform_device*);
+	int (*init)(struct platform_device *);
+	void (*exit)(struct platform_device *);
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 57e927a1fd3..27f8d1b2bc6 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -114,7 +114,7 @@ enum iomux_gp_func {
  * 	- setups the iomux according to the configuration
  * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
  */
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
 /*
  * setups mutliple pins
  * convenient way to call the above function with tables
@@ -633,6 +633,40 @@ enum iomux_pins {
 #define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
new file mode 100644
index 00000000000..00b0ac1db22
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -0,0 +1,1267 @@
+/*
+ * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option, NO_PAD_CTRL) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_MX35_H__
+#define __MACH_IOMUX_MX35_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/*									  PAD    MUX   ALT INPSE PATH */
+#define MX35_PAD_CAPTURE__GPT_CAPIN1				IOMUX_PAD(0x328, 0x004, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPT_CMPOUT2				IOMUX_PAD(0x328, 0x004, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CSPI2_SS1				IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__EPIT1_EPITO				IOMUX_PAD(0x328, 0x004, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CCM_CLK32K				IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPIO1_4				IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_COMPARE__GPT_CMPOUT1				IOMUX_PAD(0x32c, 0x008, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CAPIN2				IOMUX_PAD(0x32c, 0x008, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CMPOUT3				IOMUX_PAD(0x32c, 0x008, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__EPIT2_EPITO				IOMUX_PAD(0x32c, 0x008, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPIO1_5				IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__SDMA_EXTDMA_2				IOMUX_PAD(0x32c, 0x008, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_WDOG_RST__WDOG_WDOG_B				IOMUX_PAD(0x330, 0x00c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE			IOMUX_PAD(0x330, 0x00c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__GPIO1_6				IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_0__GPIO1_0				IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY				IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__OWIRE_LINE				IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0				IOMUX_PAD(0x334, 0x010, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_1__GPIO1_1				IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__PWM_PWMO				IOMUX_PAD(0x338, 0x014, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__CSPI1_SS2				IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT			IOMUX_PAD(0x338, 0x014, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1				IOMUX_PAD(0x338, 0x014, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO2_0__GPIO2_0				IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK			IOMUX_PAD(0x33c, 0x018, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO3_0__GPIO3_0				IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK			IOMUX_PAD(0x340, 0x01c, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B			IOMUX_PAD(0x344, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_POR_B__CCM_POR_B				IOMUX_PAD(0x348, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLKO__CCM_CLKO					IOMUX_PAD(0x34c, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CLKO__GPIO1_8					IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0			IOMUX_PAD(0x350, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1			IOMUX_PAD(0x354, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0			IOMUX_PAD(0x358, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1			IOMUX_PAD(0x35c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26		IOMUX_PAD(0x360, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_VSTBY__CCM_VSTBY				IOMUX_PAD(0x364, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_VSTBY__GPIO1_7					IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A0__EMI_EIM_DA_L_0				IOMUX_PAD(0x368, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A1__EMI_EIM_DA_L_1				IOMUX_PAD(0x36c, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A2__EMI_EIM_DA_L_2				IOMUX_PAD(0x370, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A3__EMI_EIM_DA_L_3				IOMUX_PAD(0x374, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A4__EMI_EIM_DA_L_4				IOMUX_PAD(0x378, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A5__EMI_EIM_DA_L_5				IOMUX_PAD(0x37c, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A6__EMI_EIM_DA_L_6				IOMUX_PAD(0x380, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A7__EMI_EIM_DA_L_7				IOMUX_PAD(0x384, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A8__EMI_EIM_DA_H_8				IOMUX_PAD(0x388, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A9__EMI_EIM_DA_H_9				IOMUX_PAD(0x38c, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A10__EMI_EIM_DA_H_10				IOMUX_PAD(0x390, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MA10__EMI_MA10					IOMUX_PAD(0x394, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A11__EMI_EIM_DA_H_11				IOMUX_PAD(0x398, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A12__EMI_EIM_DA_H_12				IOMUX_PAD(0x39c, 0x05c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A13__EMI_EIM_DA_H_13				IOMUX_PAD(0x3a0, 0x060, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A14__EMI_EIM_DA_H2_14				IOMUX_PAD(0x3a4, 0x064, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A15__EMI_EIM_DA_H2_15				IOMUX_PAD(0x3a8, 0x068, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A16__EMI_EIM_A_16				IOMUX_PAD(0x3ac, 0x06c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A17__EMI_EIM_A_17				IOMUX_PAD(0x3b0, 0x070, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A18__EMI_EIM_A_18				IOMUX_PAD(0x3b4, 0x074, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A19__EMI_EIM_A_19				IOMUX_PAD(0x3b8, 0x078, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A20__EMI_EIM_A_20				IOMUX_PAD(0x3bc, 0x07c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A21__EMI_EIM_A_21				IOMUX_PAD(0x3c0, 0x080, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A22__EMI_EIM_A_22				IOMUX_PAD(0x3c4, 0x084, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A23__EMI_EIM_A_23				IOMUX_PAD(0x3c8, 0x088, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A24__EMI_EIM_A_24				IOMUX_PAD(0x3cc, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A25__EMI_EIM_A_25				IOMUX_PAD(0x3d0, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA1__EMI_EIM_SDBA1				IOMUX_PAD(0x3d4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA0__EMI_EIM_SDBA0				IOMUX_PAD(0x3d8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD0__EMI_DRAM_D_0				IOMUX_PAD(0x3dc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1__EMI_DRAM_D_1				IOMUX_PAD(0x3e0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2__EMI_DRAM_D_2				IOMUX_PAD(0x3e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD3__EMI_DRAM_D_3				IOMUX_PAD(0x3e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD4__EMI_DRAM_D_4				IOMUX_PAD(0x3ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD5__EMI_DRAM_D_5				IOMUX_PAD(0x3f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD6__EMI_DRAM_D_6				IOMUX_PAD(0x3f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD7__EMI_DRAM_D_7				IOMUX_PAD(0x3f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD8__EMI_DRAM_D_8				IOMUX_PAD(0x3fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD9__EMI_DRAM_D_9				IOMUX_PAD(0x400, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD10__EMI_DRAM_D_10				IOMUX_PAD(0x404, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD11__EMI_DRAM_D_11				IOMUX_PAD(0x408, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD12__EMI_DRAM_D_12				IOMUX_PAD(0x40c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD13__EMI_DRAM_D_13				IOMUX_PAD(0x410, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD14__EMI_DRAM_D_14				IOMUX_PAD(0x414, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD15__EMI_DRAM_D_15				IOMUX_PAD(0x418, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD16__EMI_DRAM_D_16				IOMUX_PAD(0x41c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD17__EMI_DRAM_D_17				IOMUX_PAD(0x420, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD18__EMI_DRAM_D_18				IOMUX_PAD(0x424, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD19__EMI_DRAM_D_19				IOMUX_PAD(0x428, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD20__EMI_DRAM_D_20				IOMUX_PAD(0x42c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD21__EMI_DRAM_D_21				IOMUX_PAD(0x430, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD22__EMI_DRAM_D_22				IOMUX_PAD(0x434, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD23__EMI_DRAM_D_23				IOMUX_PAD(0x438, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD24__EMI_DRAM_D_24				IOMUX_PAD(0x43c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD25__EMI_DRAM_D_25				IOMUX_PAD(0x440, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD26__EMI_DRAM_D_26				IOMUX_PAD(0x444, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD27__EMI_DRAM_D_27				IOMUX_PAD(0x448, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD28__EMI_DRAM_D_28				IOMUX_PAD(0x44c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD29__EMI_DRAM_D_29				IOMUX_PAD(0x450, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD30__EMI_DRAM_D_30				IOMUX_PAD(0x454, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD31__EMI_DRAM_D_31				IOMUX_PAD(0x458, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM0__EMI_DRAM_DQM_0				IOMUX_PAD(0x45c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM1__EMI_DRAM_DQM_1				IOMUX_PAD(0x460, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM2__EMI_DRAM_DQM_2				IOMUX_PAD(0x464, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM3__EMI_DRAM_DQM_3				IOMUX_PAD(0x468, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB0__EMI_EIM_EB0_B				IOMUX_PAD(0x46c, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB1__EMI_EIM_EB1_B				IOMUX_PAD(0x470, 0x098, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_OE__EMI_EIM_OE					IOMUX_PAD(0x474, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS0__EMI_EIM_CS0				IOMUX_PAD(0x478, 0x0a0, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS1__EMI_EIM_CS1				IOMUX_PAD(0x47c, 0x0a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS1__EMI_NANDF_CE3				IOMUX_PAD(0x47c, 0x0a4, 3, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS2__EMI_EIM_CS2				IOMUX_PAD(0x480, 0x0a8, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS3__EMI_EIM_CS3				IOMUX_PAD(0x484, 0x0ac, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS4__EMI_EIM_CS4				IOMUX_PAD(0x488, 0x0b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_DTACK_B				IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_NANDF_CE1				IOMUX_PAD(0x488, 0x0b0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__GPIO1_20					IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS5__EMI_EIM_CS5				IOMUX_PAD(0x48c, 0x0b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI2_SS2					IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI1_SS2					IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_CS5__EMI_NANDF_CE2				IOMUX_PAD(0x48c, 0x0b4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__GPIO1_21					IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NF_CE0__EMI_NANDF_CE0				IOMUX_PAD(0x490, 0x0b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NF_CE0__GPIO1_22				IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ECB__EMI_EIM_ECB				IOMUX_PAD(0x494, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LBA__EMI_EIM_LBA				IOMUX_PAD(0x498, 0x0bc, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_BCLK__EMI_EIM_BCLK				IOMUX_PAD(0x49c, 0x0c0, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RW__EMI_EIM_RW					IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RAS__EMI_DRAM_RAS				IOMUX_PAD(0x4a4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CAS__EMI_DRAM_CAS				IOMUX_PAD(0x4a8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDWE__EMI_DRAM_SDWE				IOMUX_PAD(0x4ac, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0			IOMUX_PAD(0x4b0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1			IOMUX_PAD(0x4b4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK				IOMUX_PAD(0x4b8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0				IOMUX_PAD(0x4bc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1				IOMUX_PAD(0x4c0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2				IOMUX_PAD(0x4c4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3				IOMUX_PAD(0x4c8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B				IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3			IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__GPIO2_18				IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0			IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B				IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR			IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK				IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__GPIO2_19				IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1			IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFALE__EMI_NANDF_ALE				IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__USB_TOP_USBH2_STP			IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__IPU_DISPB_CS0				IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__GPIO2_20				IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2			IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFCLE__EMI_NANDF_CLE				IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT			IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS			IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__GPIO2_21				IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3			IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B				IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7			IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__IPU_DISPB_WR				IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__GPIO2_22				IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL			IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRB__EMI_NANDF_RB				IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__IPU_DISPB_RD				IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__GPIO2_23					IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK				IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D15__EMI_EIM_D_15				IOMUX_PAD(0x4e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D14__EMI_EIM_D_14				IOMUX_PAD(0x4e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D13__EMI_EIM_D_13				IOMUX_PAD(0x4ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D12__EMI_EIM_D_12				IOMUX_PAD(0x4f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D11__EMI_EIM_D_11				IOMUX_PAD(0x4f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D10__EMI_EIM_D_10				IOMUX_PAD(0x4f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D9__EMI_EIM_D_9				IOMUX_PAD(0x4fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D8__EMI_EIM_D_8				IOMUX_PAD(0x500, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D7__EMI_EIM_D_7				IOMUX_PAD(0x504, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D6__EMI_EIM_D_6				IOMUX_PAD(0x508, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D5__EMI_EIM_D_5				IOMUX_PAD(0x50c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D4__EMI_EIM_D_4				IOMUX_PAD(0x510, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3__EMI_EIM_D_3				IOMUX_PAD(0x514, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D2__EMI_EIM_D_2				IOMUX_PAD(0x518, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D1__EMI_EIM_D_1				IOMUX_PAD(0x51c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D0__EMI_EIM_D_0				IOMUX_PAD(0x520, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D8__IPU_CSI_D_8				IOMUX_PAD(0x524, 0x0e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__KPP_COL_0				IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__GPIO1_20				IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13			IOMUX_PAD(0x524, 0x0e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D9__IPU_CSI_D_9				IOMUX_PAD(0x528, 0x0e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__KPP_COL_1				IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__GPIO1_21				IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14			IOMUX_PAD(0x528, 0x0e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D10__IPU_CSI_D_10				IOMUX_PAD(0x52c, 0x0e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__KPP_COL_2				IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__GPIO1_22				IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15			IOMUX_PAD(0x52c, 0x0e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D11__IPU_CSI_D_11				IOMUX_PAD(0x530, 0x0ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__KPP_COL_3				IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__GPIO1_23				IOMUX_PAD(0x530, 0x0ec, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D12__IPU_CSI_D_12				IOMUX_PAD(0x534, 0x0f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__KPP_ROW_0				IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__GPIO1_24				IOMUX_PAD(0x534, 0x0f0, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D13__IPU_CSI_D_13				IOMUX_PAD(0x538, 0x0f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__KPP_ROW_1				IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__GPIO1_25				IOMUX_PAD(0x538, 0x0f4, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D14__IPU_CSI_D_14				IOMUX_PAD(0x53c, 0x0f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__KPP_ROW_2				IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__GPIO1_26				IOMUX_PAD(0x53c, 0x0f8, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D15__IPU_CSI_D_15				IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__KPP_ROW_3				IOMUX_PAD(0x540, 0x0fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__GPIO1_27				IOMUX_PAD(0x540, 0x0fc, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK				IOMUX_PAD(0x544, 0x100, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_MCLK__GPIO1_28				IOMUX_PAD(0x544, 0x100, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC			IOMUX_PAD(0x548, 0x104, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_VSYNC__GPIO1_29				IOMUX_PAD(0x548, 0x104, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC			IOMUX_PAD(0x54c, 0x108, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_HSYNC__GPIO1_30				IOMUX_PAD(0x54c, 0x108, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK			IOMUX_PAD(0x550, 0x10c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_PIXCLK__GPIO1_31				IOMUX_PAD(0x550, 0x10c, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_CLK__I2C1_SCL				IOMUX_PAD(0x554, 0x110, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__GPIO2_24				IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK			IOMUX_PAD(0x554, 0x110, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_DAT__I2C1_SDA				IOMUX_PAD(0x558, 0x114, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_DAT__GPIO2_25				IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_CLK__I2C2_SCL				IOMUX_PAD(0x55c, 0x118, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__CAN1_TXCAN				IOMUX_PAD(0x55c, 0x118, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR			IOMUX_PAD(0x55c, 0x118, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__GPIO2_26				IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2		IOMUX_PAD(0x55c, 0x118, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_DAT__I2C2_SDA				IOMUX_PAD(0x560, 0x11c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__CAN1_RXCAN				IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC			IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__GPIO2_27				IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3		IOMUX_PAD(0x560, 0x11c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD				IOMUX_PAD(0x564, 0x120, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__GPIO2_28				IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0		IOMUX_PAD(0x564, 0x120, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD				IOMUX_PAD(0x568, 0x124, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__GPIO2_29				IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1		IOMUX_PAD(0x568, 0x124, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC				IOMUX_PAD(0x56c, 0x128, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__GPIO2_30					IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2			IOMUX_PAD(0x56c, 0x128, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS			IOMUX_PAD(0x570, 0x12c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__GPIO2_31				IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3		IOMUX_PAD(0x570, 0x12c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD				IOMUX_PAD(0x574, 0x130, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x574, 0x130, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__CSPI2_MOSI				IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__GPIO1_0					IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4		IOMUX_PAD(0x574, 0x130, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD				IOMUX_PAD(0x578, 0x134, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1				IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__CSPI2_MISO				IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__GPIO1_1					IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5		IOMUX_PAD(0x578, 0x134, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC				IOMUX_PAD(0x57c, 0x138, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__CSPI2_SCLK				IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__GPIO1_2					IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6			IOMUX_PAD(0x57c, 0x138, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS			IOMUX_PAD(0x580, 0x13c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__CSPI2_RDY				IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__GPIO1_3				IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7		IOMUX_PAD(0x580, 0x13c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKR__ESAI_SCKR				IOMUX_PAD(0x584, 0x140, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__GPIO1_4					IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10			IOMUX_PAD(0x584, 0x140, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FSR__ESAI_FSR					IOMUX_PAD(0x588, 0x144, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FSR__GPIO1_5					IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
+#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11			IOMUX_PAD(0x588, 0x144, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKR__ESAI_HCKR				IOMUX_PAD(0x58c, 0x148, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS				IOMUX_PAD(0x58c, 0x148, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__CSPI2_SS0				IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__IPU_FLASH_STROBE				IOMUX_PAD(0x58c, 0x148, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__GPIO1_6					IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12			IOMUX_PAD(0x58c, 0x148, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKT__ESAI_SCKT				IOMUX_PAD(0x590, 0x14c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__GPIO1_7					IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__IPU_CSI_D_0				IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__KPP_ROW_2				IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FST__ESAI_FST					IOMUX_PAD(0x594, 0x150, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FST__GPIO1_8					IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
+#define MX35_PAD_FST__IPU_CSI_D_1				IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__KPP_ROW_3					IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKT__ESAI_HCKT				IOMUX_PAD(0x598, 0x154, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC				IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__GPIO1_9					IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__IPU_CSI_D_2				IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__KPP_COL_3				IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0				IOMUX_PAD(0x59c, 0x158, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC			IOMUX_PAD(0x59c, 0x158, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CSPI2_SS2				IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CAN2_TXCAN				IOMUX_PAD(0x59c, 0x158, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__UART2_DTR				IOMUX_PAD(0x59c, 0x158, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__GPIO1_10				IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0		IOMUX_PAD(0x59c, 0x158, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1				IOMUX_PAD(0x5a0, 0x15c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS			IOMUX_PAD(0x5a0, 0x15c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CSPI2_SS3				IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CAN2_RXCAN				IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__UART2_DSR				IOMUX_PAD(0x5a0, 0x15c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__GPIO1_11				IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__IPU_CSI_D_3				IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__KPP_ROW_0				IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2				IOMUX_PAD(0x5a4, 0x160, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__I2C3_SCL				IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1				IOMUX_PAD(0x5a4, 0x160, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__GPIO1_12				IOMUX_PAD(0x5a4, 0x160, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__IPU_CSI_D_4				IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__KPP_ROW_1				IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3				IOMUX_PAD(0x5a8, 0x164, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__I2C3_SDA				IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2				IOMUX_PAD(0x5a8, 0x164, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__GPIO1_13				IOMUX_PAD(0x5a8, 0x164, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__IPU_CSI_D_5				IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__KPP_COL_0				IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX1__ESAI_TX1					IOMUX_PAD(0x5ac, 0x168, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CCM_PMIC_RDY				IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CSPI1_SS2					IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
+#define MX35_PAD_TX1__EMI_NANDF_CE3				IOMUX_PAD(0x5ac, 0x168, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__UART2_RI					IOMUX_PAD(0x5ac, 0x168, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__GPIO1_14					IOMUX_PAD(0x5ac, 0x168, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__IPU_CSI_D_6				IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__KPP_COL_1					IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX0__ESAI_TX0					IOMUX_PAD(0x5b0, 0x16c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__CSPI1_SS3					IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__EMI_DTACK_B				IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__UART2_DCD					IOMUX_PAD(0x5b0, 0x16c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__GPIO1_15					IOMUX_PAD(0x5b0, 0x16c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__IPU_CSI_D_7				IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__KPP_COL_2					IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI				IOMUX_PAD(0x5b4, 0x170, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__GPIO1_16				IOMUX_PAD(0x5b4, 0x170, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2		IOMUX_PAD(0x5b4, 0x170, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MISO__CSPI1_MISO				IOMUX_PAD(0x5b8, 0x174, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__GPIO1_17				IOMUX_PAD(0x5b8, 0x174, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3		IOMUX_PAD(0x5b8, 0x174, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS0__CSPI1_SS0				IOMUX_PAD(0x5bc, 0x178, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__OWIRE_LINE				IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__CSPI2_SS3				IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__GPIO1_18				IOMUX_PAD(0x5bc, 0x178, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4			IOMUX_PAD(0x5bc, 0x178, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS1__CSPI1_SS1				IOMUX_PAD(0x5c0, 0x17c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__PWM_PWMO				IOMUX_PAD(0x5c0, 0x17c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__CCM_CLK32K				IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__GPIO1_19				IOMUX_PAD(0x5c0, 0x17c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29			IOMUX_PAD(0x5c0, 0x17c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5			IOMUX_PAD(0x5c0, 0x17c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK				IOMUX_PAD(0x5c4, 0x180, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__GPIO3_4				IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30			IOMUX_PAD(0x5c4, 0x180, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1		IOMUX_PAD(0x5c4, 0x180, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY			IOMUX_PAD(0x5c8, 0x184, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5				IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31			IOMUX_PAD(0x5c8, 0x184, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2	IOMUX_PAD(0x5c8, 0x184, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD1__UART1_RXD_MUX				IOMUX_PAD(0x5cc, 0x188, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__CSPI2_MOSI				IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__KPP_COL_4				IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__GPIO3_6					IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16			IOMUX_PAD(0x5cc, 0x188, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD1__UART1_TXD_MUX				IOMUX_PAD(0x5d0, 0x18c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__CSPI2_MISO				IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__KPP_COL_5				IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__GPIO3_7					IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17			IOMUX_PAD(0x5d0, 0x18c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS1__UART1_RTS				IOMUX_PAD(0x5d4, 0x190, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__CSPI2_SCLK				IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__I2C3_SCL					IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__IPU_CSI_D_0				IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__KPP_COL_6				IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__GPIO3_8					IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__EMI_NANDF_CE1				IOMUX_PAD(0x5d4, 0x190, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18			IOMUX_PAD(0x5d4, 0x190, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS1__UART1_CTS				IOMUX_PAD(0x5d8, 0x194, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__CSPI2_RDY				IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__I2C3_SDA					IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__IPU_CSI_D_1				IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__KPP_COL_7				IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__GPIO3_9					IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__EMI_NANDF_CE2				IOMUX_PAD(0x5d8, 0x194, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19			IOMUX_PAD(0x5d8, 0x194, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD2__UART2_RXD_MUX				IOMUX_PAD(0x5dc, 0x198, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__KPP_ROW_4				IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__GPIO3_10					IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD2__UART2_TXD_MUX				IOMUX_PAD(0x5e0, 0x19c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__KPP_ROW_5				IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__GPIO3_11					IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS2__UART2_RTS				IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1				IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__CAN2_RXCAN				IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__IPU_CSI_D_2				IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__KPP_ROW_6				IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__GPIO3_12					IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC				IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__UART3_RXD_MUX				IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS2__UART2_CTS				IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1				IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__CAN2_TXCAN				IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__IPU_CSI_D_3				IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__KPP_ROW_7				IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__GPIO3_13					IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS				IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__UART3_TXD_MUX				IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTCK__ARM11P_TOP_RTCK				IOMUX_PAD(0x5ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TCK__SJC_TCK					IOMUX_PAD(0x5f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TMS__SJC_TMS					IOMUX_PAD(0x5f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDI__SJC_TDI					IOMUX_PAD(0x5f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDO__SJC_TDO					IOMUX_PAD(0x5fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TRSTB__SJC_TRSTB				IOMUX_PAD(0x600, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DE_B__SJC_DE_B					IOMUX_PAD(0x604, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SJC_MOD__SJC_MOD				IOMUX_PAD(0x608, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR			IOMUX_PAD(0x60c, 0x1a8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR			IOMUX_PAD(0x60c, 0x1a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__GPIO3_14				IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC			IOMUX_PAD(0x610, 0x1ac, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC			IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__GPIO3_15				IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD0__IPU_DISPB_DAT_0				IOMUX_PAD(0x614, 0x1b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD0__GPIO2_0					IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0			IOMUX_PAD(0x614, 0x1b0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD1__IPU_DISPB_DAT_1				IOMUX_PAD(0x618, 0x1b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__GPIO2_1					IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1			IOMUX_PAD(0x618, 0x1b4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD2__IPU_DISPB_DAT_2				IOMUX_PAD(0x61c, 0x1b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__GPIO2_2					IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2			IOMUX_PAD(0x61c, 0x1b8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD3__IPU_DISPB_DAT_3				IOMUX_PAD(0x620, 0x1bc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__GPIO2_3					IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3			IOMUX_PAD(0x620, 0x1bc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD4__IPU_DISPB_DAT_4				IOMUX_PAD(0x624, 0x1c0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__GPIO2_4					IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4			IOMUX_PAD(0x624, 0x1c0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD5__IPU_DISPB_DAT_5				IOMUX_PAD(0x628, 0x1c4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__GPIO2_5					IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5			IOMUX_PAD(0x628, 0x1c4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD6__IPU_DISPB_DAT_6				IOMUX_PAD(0x62c, 0x1c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__GPIO2_6					IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6			IOMUX_PAD(0x62c, 0x1c8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD7__IPU_DISPB_DAT_7				IOMUX_PAD(0x630, 0x1cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__GPIO2_7					IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7			IOMUX_PAD(0x630, 0x1cc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD8__IPU_DISPB_DAT_8				IOMUX_PAD(0x634, 0x1d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__GPIO2_8					IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD9__IPU_DISPB_DAT_9				IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4  0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD10__IPU_DISPB_DAT_10				IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__GPIO2_10					IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10			IOMUX_PAD(0x63c, 0x1d8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD11__IPU_DISPB_DAT_11				IOMUX_PAD(0x640, 0x1dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__GPIO2_11					IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11			IOMUX_PAD(0x640, 0x1dc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4			IOMUX_PAD(0x640, 0x1dc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD12__IPU_DISPB_DAT_12				IOMUX_PAD(0x644, 0x1e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__GPIO2_12					IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12			IOMUX_PAD(0x644, 0x1e0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5			IOMUX_PAD(0x644, 0x1e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD13__IPU_DISPB_DAT_13				IOMUX_PAD(0x648, 0x1e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__GPIO2_13					IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13			IOMUX_PAD(0x648, 0x1e4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6			IOMUX_PAD(0x648, 0x1e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD14__IPU_DISPB_DAT_14				IOMUX_PAD(0x64c, 0x1e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__GPIO2_14					IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0		IOMUX_PAD(0x64c, 0x1e8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7			IOMUX_PAD(0x64c, 0x1e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD15__IPU_DISPB_DAT_15				IOMUX_PAD(0x650, 0x1ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__GPIO2_15					IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1		IOMUX_PAD(0x650, 0x1ec, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8			IOMUX_PAD(0x650, 0x1ec, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD16__IPU_DISPB_DAT_16				IOMUX_PAD(0x654, 0x1f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__GPIO2_16					IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2		IOMUX_PAD(0x654, 0x1f0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9			IOMUX_PAD(0x654, 0x1f0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD17__IPU_DISPB_DAT_17				IOMUX_PAD(0x658, 0x1f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__IPU_DISPB_CS2				IOMUX_PAD(0x658, 0x1f4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__GPIO2_17					IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3		IOMUX_PAD(0x658, 0x1f4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10			IOMUX_PAD(0x658, 0x1f4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD18__IPU_DISPB_DAT_18				IOMUX_PAD(0x65c, 0x1f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ESDHC3_CMD				IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3			IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__GPIO3_24					IOMUX_PAD(0x65c, 0x1f8, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4		IOMUX_PAD(0x65c, 0x1f8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11			IOMUX_PAD(0x65c, 0x1f8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD19__IPU_DISPB_DAT_19				IOMUX_PAD(0x660, 0x1fc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_BCLK				IOMUX_PAD(0x660, 0x1fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_CS1				IOMUX_PAD(0x660, 0x1fc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ESDHC3_CLK				IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR			IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__GPIO3_25					IOMUX_PAD(0x660, 0x1fc, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5		IOMUX_PAD(0x660, 0x1fc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12			IOMUX_PAD(0x660, 0x1fc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD20__IPU_DISPB_DAT_20				IOMUX_PAD(0x664, 0x200, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_CS0				IOMUX_PAD(0x664, 0x200, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_SD_CLK				IOMUX_PAD(0x664, 0x200, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ESDHC3_DAT0				IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__GPIO3_26					IOMUX_PAD(0x664, 0x200, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3		IOMUX_PAD(0x664, 0x200, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13			IOMUX_PAD(0x664, 0x200, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD21__IPU_DISPB_DAT_21				IOMUX_PAD(0x668, 0x204, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_PAR_RS				IOMUX_PAD(0x668, 0x204, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_SER_RS				IOMUX_PAD(0x668, 0x204, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ESDHC3_DAT1				IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__USB_TOP_USBOTG_STP			IOMUX_PAD(0x668, 0x204, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__GPIO3_27					IOMUX_PAD(0x668, 0x204, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL		IOMUX_PAD(0x668, 0x204, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14			IOMUX_PAD(0x668, 0x204, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD22__IPU_DISPB_DAT_22				IOMUX_PAD(0x66c, 0x208, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_WR				IOMUX_PAD(0x66c, 0x208, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_SD_D_I				IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ESDHC3_DAT2				IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT			IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__GPIO3_28					IOMUX_PAD(0x66c, 0x208, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR			IOMUX_PAD(0x66c, 0x208, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ARM11P_TOP_TRCTL				IOMUX_PAD(0x66c, 0x208, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD23__IPU_DISPB_DAT_23				IOMUX_PAD(0x670, 0x20c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_RD				IOMUX_PAD(0x670, 0x20c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ESDHC3_DAT3				IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7			IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__GPIO3_29					IOMUX_PAD(0x670, 0x20c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS			IOMUX_PAD(0x670, 0x20c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ARM11P_TOP_TRCLK				IOMUX_PAD(0x670, 0x20c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC			IOMUX_PAD(0x674, 0x210, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__GPIO3_30				IOMUX_PAD(0x674, 0x210, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE		IOMUX_PAD(0x674, 0x210, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15			IOMUX_PAD(0x674, 0x210, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK			IOMUX_PAD(0x678, 0x214, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK			IOMUX_PAD(0x678, 0x214, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__GPIO3_31				IOMUX_PAD(0x678, 0x214, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0	IOMUX_PAD(0x678, 0x214, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16		IOMUX_PAD(0x678, 0x214, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY			IOMUX_PAD(0x67c, 0x218, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O			IOMUX_PAD(0x67c, 0x218, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__GPIO1_0				IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1		IOMUX_PAD(0x67c, 0x218, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17			IOMUX_PAD(0x67c, 0x218, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR			IOMUX_PAD(0x680, 0x21c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__GPIO1_1				IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2	IOMUX_PAD(0x680, 0x21c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18			IOMUX_PAD(0x680, 0x21c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC			IOMUX_PAD(0x684, 0x220, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1			IOMUX_PAD(0x684, 0x220, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__GPIO1_2				IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD			IOMUX_PAD(0x684, 0x220, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19			IOMUX_PAD(0x684, 0x220, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV			IOMUX_PAD(0x688, 0x224, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS			IOMUX_PAD(0x688, 0x224, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__GPIO1_3				IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB			IOMUX_PAD(0x688, 0x224, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20			IOMUX_PAD(0x688, 0x224, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS			IOMUX_PAD(0x68c, 0x228, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__IPU_DISPB_CS2				IOMUX_PAD(0x68c, 0x228, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__GPIO1_4				IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0		IOMUX_PAD(0x68c, 0x228, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21			IOMUX_PAD(0x68c, 0x228, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL			IOMUX_PAD(0x690, 0x22c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__GPIO1_5				IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1		IOMUX_PAD(0x690, 0x22c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22			IOMUX_PAD(0x690, 0x22c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CMD__ESDHC1_CMD				IOMUX_PAD(0x694, 0x230, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__MSHC_SCLK				IOMUX_PAD(0x694, 0x230, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4			IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__GPIO1_6				IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL			IOMUX_PAD(0x694, 0x230, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CLK__ESDHC1_CLK				IOMUX_PAD(0x698, 0x234, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__MSHC_BS				IOMUX_PAD(0x698, 0x234, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK			IOMUX_PAD(0x698, 0x234, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5			IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__GPIO1_7				IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK			IOMUX_PAD(0x698, 0x234, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0				IOMUX_PAD(0x69c, 0x238, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__MSHC_DATA_0				IOMUX_PAD(0x69c, 0x238, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0			IOMUX_PAD(0x69c, 0x238, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6		IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__GPIO1_8				IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23			IOMUX_PAD(0x69c, 0x238, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1				IOMUX_PAD(0x6a0, 0x23c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__MSHC_DATA_1				IOMUX_PAD(0x6a0, 0x23c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS			IOMUX_PAD(0x6a0, 0x23c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0		IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__GPIO1_9				IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24			IOMUX_PAD(0x6a0, 0x23c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2				IOMUX_PAD(0x6a4, 0x240, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__MSHC_DATA_2				IOMUX_PAD(0x6a4, 0x240, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR			IOMUX_PAD(0x6a4, 0x240, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1		IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__GPIO1_10				IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25			IOMUX_PAD(0x6a4, 0x240, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3				IOMUX_PAD(0x6a8, 0x244, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__MSHC_DATA_3				IOMUX_PAD(0x6a8, 0x244, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD			IOMUX_PAD(0x6a8, 0x244, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2		IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__GPIO1_11				IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26			IOMUX_PAD(0x6a8, 0x244, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CMD__ESDHC2_CMD				IOMUX_PAD(0x6ac, 0x248, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__I2C3_SCL				IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__ESDHC1_DAT4				IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_CSI_D_2				IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4			IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__GPIO2_0				IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x6ac, 0x248, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CLK__ESDHC2_CLK				IOMUX_PAD(0x6b0, 0x24c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__I2C3_SDA				IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__ESDHC1_DAT5				IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_CSI_D_3				IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5			IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__GPIO2_1				IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1			IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2				IOMUX_PAD(0x6b0, 0x24c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0				IOMUX_PAD(0x6b4, 0x250, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX			IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6				IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4				IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6		IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__GPIO2_2				IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1				IOMUX_PAD(0x6b8, 0x254, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX			IOMUX_PAD(0x6b8, 0x254, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7				IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5				IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0		IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__GPIO2_3				IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2				IOMUX_PAD(0x6bc, 0x258, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__UART3_RTS				IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__CAN1_RXCAN				IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6				IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1		IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__GPIO2_4				IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3				IOMUX_PAD(0x6c0, 0x25c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__UART3_CTS				IOMUX_PAD(0x6c0, 0x25c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__CAN1_TXCAN				IOMUX_PAD(0x6c0, 0x25c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7				IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2		IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__GPIO2_5				IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS0__ATA_CS0				IOMUX_PAD(0x6c4, 0x260, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__CSPI1_SS3				IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1				IOMUX_PAD(0x6c4, 0x260, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__GPIO2_6				IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DIAGB_0				IOMUX_PAD(0x6c4, 0x260, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0		IOMUX_PAD(0x6c4, 0x260, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS1__ATA_CS1				IOMUX_PAD(0x6c8, 0x264, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2				IOMUX_PAD(0x6c8, 0x264, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__CSPI2_SS0				IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__GPIO2_7				IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DIAGB_1				IOMUX_PAD(0x6c8, 0x264, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1		IOMUX_PAD(0x6c8, 0x264, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOR__ATA_DIOR				IOMUX_PAD(0x6cc, 0x268, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0				IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR			IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0			IOMUX_PAD(0x6cc, 0x268, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__CSPI2_SS1				IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__GPIO2_8				IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2				IOMUX_PAD(0x6cc, 0x268, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2		IOMUX_PAD(0x6cc, 0x268, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOW__ATA_DIOW				IOMUX_PAD(0x6d0, 0x26c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1				IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP			IOMUX_PAD(0x6d0, 0x26c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1			IOMUX_PAD(0x6d0, 0x26c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__CSPI2_MOSI				IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__GPIO2_9				IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3				IOMUX_PAD(0x6d0, 0x26c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3		IOMUX_PAD(0x6d0, 0x26c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMACK__ATA_DMACK				IOMUX_PAD(0x6d4, 0x270, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2				IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT			IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__CSPI2_MISO				IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__GPIO2_10				IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4				IOMUX_PAD(0x6d4, 0x270, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0		IOMUX_PAD(0x6d4, 0x270, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_RESET_B__ATA_RESET_B			IOMUX_PAD(0x6d8, 0x274, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3			IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0		IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O			IOMUX_PAD(0x6d8, 0x274, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__CSPI2_RDY				IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__GPIO2_11				IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5			IOMUX_PAD(0x6d8, 0x274, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1		IOMUX_PAD(0x6d8, 0x274, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_IORDY__ATA_IORDY				IOMUX_PAD(0x6dc, 0x278, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4				IOMUX_PAD(0x6dc, 0x278, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1		IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4				IOMUX_PAD(0x6dc, 0x278, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__GPIO2_12				IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6				IOMUX_PAD(0x6dc, 0x278, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2		IOMUX_PAD(0x6dc, 0x278, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA0__ATA_DATA_0				IOMUX_PAD(0x6e0, 0x27c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5				IOMUX_PAD(0x6e0, 0x27c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2		IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5				IOMUX_PAD(0x6e0, 0x27c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__GPIO2_13				IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7				IOMUX_PAD(0x6e0, 0x27c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3		IOMUX_PAD(0x6e0, 0x27c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA1__ATA_DATA_1				IOMUX_PAD(0x6e4, 0x280, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6				IOMUX_PAD(0x6e4, 0x280, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3		IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK			IOMUX_PAD(0x6e4, 0x280, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6				IOMUX_PAD(0x6e4, 0x280, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__GPIO2_14				IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8				IOMUX_PAD(0x6e4, 0x280, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27			IOMUX_PAD(0x6e4, 0x280, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA2__ATA_DATA_2				IOMUX_PAD(0x6e8, 0x284, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7				IOMUX_PAD(0x6e8, 0x284, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4		IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS			IOMUX_PAD(0x6e8, 0x284, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7				IOMUX_PAD(0x6e8, 0x284, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__GPIO2_15				IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9				IOMUX_PAD(0x6e8, 0x284, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			IOMUX_PAD(0x6e8, 0x284, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3				IOMUX_PAD(0x6e8, 0x288, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__GPIO2_16				IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			IOMUX_PAD(0x6e8, 0x288, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			IOMUX_PAD(0x6e8, 0x288, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA4__ATA_DATA_4				IOMUX_PAD(0x6f0, 0x28c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ESDHC3_CMD				IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6		IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__GPIO2_17				IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11			IOMUX_PAD(0x6f0, 0x28c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30			IOMUX_PAD(0x6f0, 0x28c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA5__ATA_DATA_5				IOMUX_PAD(0x6f4, 0x290, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7		IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__GPIO2_18				IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12			IOMUX_PAD(0x6f4, 0x290, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31			IOMUX_PAD(0x6f4, 0x290, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA6__ATA_DATA_6				IOMUX_PAD(0x6f8, 0x294, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__CAN1_TXCAN				IOMUX_PAD(0x6f8, 0x294, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__UART1_DTR				IOMUX_PAD(0x6f8, 0x294, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD			IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__GPIO2_19				IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13			IOMUX_PAD(0x6f8, 0x294, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA7__ATA_DATA_7				IOMUX_PAD(0x6fc, 0x298, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__CAN1_RXCAN				IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__UART1_DSR				IOMUX_PAD(0x6fc, 0x298, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD			IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__GPIO2_20				IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14			IOMUX_PAD(0x6fc, 0x298, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA8__ATA_DATA_8				IOMUX_PAD(0x700, 0x29c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART3_RTS				IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART1_RI				IOMUX_PAD(0x700, 0x29c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC			IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__GPIO2_21				IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15			IOMUX_PAD(0x700, 0x29c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA9__ATA_DATA_9				IOMUX_PAD(0x704, 0x2a0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART3_CTS				IOMUX_PAD(0x704, 0x2a0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART1_DCD				IOMUX_PAD(0x704, 0x2a0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS			IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__GPIO2_22				IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16			IOMUX_PAD(0x704, 0x2a0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA10__ATA_DATA_10			IOMUX_PAD(0x708, 0x2a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX			IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC			IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__GPIO2_23				IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17			IOMUX_PAD(0x708, 0x2a4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA11__ATA_DATA_11			IOMUX_PAD(0x70c, 0x2a8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX			IOMUX_PAD(0x70c, 0x2a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS			IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__GPIO2_24				IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18			IOMUX_PAD(0x70c, 0x2a8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA12__ATA_DATA_12			IOMUX_PAD(0x710, 0x2ac, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__I2C3_SCL				IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__GPIO2_25				IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19			IOMUX_PAD(0x710, 0x2ac, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA13__ATA_DATA_13			IOMUX_PAD(0x714, 0x2b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__I2C3_SDA				IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__GPIO2_26				IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20			IOMUX_PAD(0x714, 0x2b0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA14__ATA_DATA_14			IOMUX_PAD(0x718, 0x2b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0			IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__KPP_ROW_0				IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__GPIO2_27				IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21			IOMUX_PAD(0x718, 0x2b4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA15__ATA_DATA_15			IOMUX_PAD(0x71c, 0x2b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1			IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__KPP_ROW_1				IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__GPIO2_28				IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22			IOMUX_PAD(0x71c, 0x2b8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_INTRQ__ATA_INTRQ				IOMUX_PAD(0x720, 0x2bc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2				IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__KPP_ROW_2				IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__GPIO2_29				IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23			IOMUX_PAD(0x720, 0x2bc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN			IOMUX_PAD(0x724, 0x2c0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3			IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3				IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__GPIO2_30				IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24			IOMUX_PAD(0x724, 0x2c0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMARQ__ATA_DMARQ				IOMUX_PAD(0x728, 0x2c4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4				IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__KPP_COL_0				IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__GPIO2_31				IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25			IOMUX_PAD(0x728, 0x2c4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4			IOMUX_PAD(0x728, 0x2c4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA0__ATA_DA_0				IOMUX_PAD(0x72c, 0x2c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_CSI_D_5				IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__KPP_COL_1				IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__GPIO3_0				IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_DIAGB_26				IOMUX_PAD(0x72c, 0x2c8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5			IOMUX_PAD(0x72c, 0x2c8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA1__ATA_DA_1				IOMUX_PAD(0x730, 0x2cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_CSI_D_6				IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__KPP_COL_2				IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__GPIO3_1				IOMUX_PAD(0x730, 0x2cc, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_DIAGB_27				IOMUX_PAD(0x730, 0x2cc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6			IOMUX_PAD(0x730, 0x2cc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA2__ATA_DA_2				IOMUX_PAD(0x734, 0x2d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_CSI_D_7				IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__KPP_COL_3				IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__GPIO3_2				IOMUX_PAD(0x734, 0x2d0, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_DIAGB_28				IOMUX_PAD(0x734, 0x2d0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7			IOMUX_PAD(0x734, 0x2d0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_CLK__MLB_MLBCLK				IOMUX_PAD(0x738, 0x2d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_CLK__GPIO3_3				IOMUX_PAD(0x738, 0x2d4, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_DAT__MLB_MLBDAT				IOMUX_PAD(0x73c, 0x2d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_DAT__GPIO3_4				IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_SIG__MLB_MLBSIG				IOMUX_PAD(0x740, 0x2dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_SIG__GPIO3_5				IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK				IOMUX_PAD(0x744, 0x2e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4			IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX			IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR			IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI				IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__GPIO3_6				IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC		IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0		IOMUX_PAD(0x744, 0x2e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK				IOMUX_PAD(0x748, 0x2e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5			IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX			IOMUX_PAD(0x748, 0x2e4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP			IOMUX_PAD(0x748, 0x2e4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO				IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__GPIO3_7				IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I			IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1		IOMUX_PAD(0x748, 0x2e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_DV__FEC_RX_DV				IOMUX_PAD(0x74c, 0x2e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6				IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__UART3_RTS				IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT			IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK				IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__GPIO3_8				IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK			IOMUX_PAD(0x74c, 0x2e8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2		IOMUX_PAD(0x74c, 0x2e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_COL__FEC_COL				IOMUX_PAD(0x750, 0x2ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ESDHC1_DAT7				IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__UART3_CTS				IOMUX_PAD(0x750, 0x2ec, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0			IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__CSPI2_RDY				IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__GPIO3_9				IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS			IOMUX_PAD(0x750, 0x2ec, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3			IOMUX_PAD(0x750, 0x2ec, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0			IOMUX_PAD(0x754, 0x2f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__PWM_PWMO				IOMUX_PAD(0x754, 0x2f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__UART3_DTR				IOMUX_PAD(0x754, 0x2f0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1		IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__CSPI2_SS0				IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__GPIO3_10				IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1			IOMUX_PAD(0x754, 0x2f0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4		IOMUX_PAD(0x754, 0x2f0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0			IOMUX_PAD(0x758, 0x2f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x758, 0x2f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__UART3_DSR				IOMUX_PAD(0x758, 0x2f4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2		IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__CSPI2_SS1				IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__GPIO3_11				IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0			IOMUX_PAD(0x758, 0x2f4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5		IOMUX_PAD(0x758, 0x2f4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_EN__FEC_TX_EN				IOMUX_PAD(0x75c, 0x2f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1			IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__UART3_RI				IOMUX_PAD(0x75c, 0x2f8, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3		IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__GPIO3_12				IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS			IOMUX_PAD(0x75c, 0x2f8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6		IOMUX_PAD(0x75c, 0x2f8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDC__FEC_MDC				IOMUX_PAD(0x760, 0x2fc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__CAN2_TXCAN				IOMUX_PAD(0x760, 0x2fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__UART3_DCD				IOMUX_PAD(0x760, 0x2fc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4			IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__GPIO3_13				IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__IPU_DISPB_WR				IOMUX_PAD(0x760, 0x2fc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7			IOMUX_PAD(0x760, 0x2fc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDIO__FEC_MDIO				IOMUX_PAD(0x764, 0x300, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__CAN2_RXCAN				IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5			IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__GPIO3_14				IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD				IOMUX_PAD(0x764, 0x300, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8			IOMUX_PAD(0x764, 0x300, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR				IOMUX_PAD(0x768, 0x304, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE				IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6		IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__GPIO3_15				IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9		IOMUX_PAD(0x768, 0x304, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR				IOMUX_PAD(0x76c, 0x308, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0			IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7		IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__KPP_COL_4				IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__GPIO3_16				IOMUX_PAD(0x76c, 0x308, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_CRS__FEC_CRS				IOMUX_PAD(0x770, 0x30c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_CSI_D_1				IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR			IOMUX_PAD(0x770, 0x30c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__KPP_COL_5				IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__GPIO3_17				IOMUX_PAD(0x770, 0x30c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE			IOMUX_PAD(0x770, 0x30c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1			IOMUX_PAD(0x774, 0x310, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2			IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC			IOMUX_PAD(0x774, 0x310, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC			IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__KPP_COL_6				IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__GPIO3_18				IOMUX_PAD(0x774, 0x310, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0			IOMUX_PAD(0x774, 0x310, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1			IOMUX_PAD(0x778, 0x314, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3			IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS			IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__KPP_COL_7				IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__GPIO3_19				IOMUX_PAD(0x778, 0x314, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1			IOMUX_PAD(0x778, 0x314, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2			IOMUX_PAD(0x77c, 0x318, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4			IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD			IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__KPP_ROW_4				IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__GPIO3_20				IOMUX_PAD(0x77c, 0x318, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2			IOMUX_PAD(0x780, 0x31c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5			IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD			IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__KPP_ROW_5				IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__GPIO3_21				IOMUX_PAD(0x780, 0x31c, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3			IOMUX_PAD(0x784, 0x320, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6			IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC			IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__KPP_ROW_6				IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__GPIO3_22				IOMUX_PAD(0x784, 0x320, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3			IOMUX_PAD(0x788, 0x324, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7			IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS			IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__KPP_ROW_7				IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__GPIO3_23				IOMUX_PAD(0x788, 0x324, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK			IOMUX_PAD(0x78c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TEST_MODE__TCU_TEST_MODE			IOMUX_PAD(0x790, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+
+#endif /* __MACH_IOMUX_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
new file mode 100644
index 00000000000..7cd84547658
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *			<armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+/*
+ *	build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ *   things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ *   (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ *   (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num>
+ *
+ */
+
+struct pad_desc {
+	unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */
+	unsigned mux_mode:8;
+	unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */
+#define	NO_PAD_CTRL	(1 << 16)
+	unsigned pad_ctrl:17;
+	unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */
+	unsigned select_input:3;
+};
+
+#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
+		_select_input, _pad_ctrl)				\
+		{							\
+			.mux_ctrl_ofs     = _mux_ctrl_ofs,		\
+			.mux_mode         = _mux_mode,			\
+			.pad_ctrl_ofs     = _pad_ctrl_ofs,		\
+			.pad_ctrl         = _pad_ctrl,			\
+			.select_input_ofs = _select_input_ofs,		\
+			.select_input     = _select_input,		\
+		}
+
+/*
+ * Use to set PAD control
+ */
+#define PAD_CTL_DRIVE_VOLTAGE_3_3_V	0
+#define PAD_CTL_DRIVE_VOLTAGE_1_8_V	1
+
+#define PAD_CTL_NO_HYSTERESIS		0
+#define PAD_CTL_HYSTERESIS		1
+
+#define PAD_CTL_PULL_DISABLED		0x0
+#define PAD_CTL_PULL_KEEPER		0xa
+#define PAD_CTL_PULL_DOWN_100K		0xc
+#define PAD_CTL_PULL_UP_47K		0xd
+#define PAD_CTL_PULL_UP_100K		0xe
+#define PAD_CTL_PULL_UP_22K		0xf
+
+#define PAD_CTL_OUTPUT_CMOS		0
+#define PAD_CTL_OUTPUT_OPEN_DRAIN	1
+
+#define PAD_CTL_DRIVE_STRENGTH_NORM	0
+#define PAD_CTL_DRIVE_STRENGTH_HIGH	1
+#define PAD_CTL_DRIVE_STRENGTH_MAX	2
+
+#define PAD_CTL_SLEW_RATE_SLOW		0
+#define PAD_CTL_SLEW_RATE_FAST		1
+
+/*
+ * setups a single pad:
+ * 	- reserves the pad so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
+
+/*
+ * setups mutliple pads
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
+
+/*
+ * releases a single pad:
+ * 	- make it available for a future use by another driver
+ * 	- DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_v3_release_pad(struct pad_desc *pad);
+
+/*
+ * releases multiple pads
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
+
+#endif /* __MACH_IOMUX_V3_H__*/
+
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index eca37d09f3f..6065e00176e 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -32,4 +32,12 @@
 #define CONSISTENT_DMA_SIZE SZ_4M
 #endif /* CONFIG_MX1_VIDEO */
 
+#if defined(CONFIG_MX3_VIDEO)
+/*
+ * Increase size of DMA-consistent memory region.
+ * This is required for mx3 camera driver to capture at least two QXGA frames.
+ */
+#define CONSISTENT_DMA_SIZE SZ_8M
+#endif /* CONFIG_MX3_VIDEO */
+
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index b92e02324d8..1000bf330bc 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -179,7 +179,7 @@
 #define DMA_REQ_UART1_T		30
 #define DMA_REQ_UART1_R		31
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
 
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 3878c6085d5..b559a4bb576 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -48,6 +48,9 @@
 #define CS4_SIZE		SZ_32M
 
 #define CS5_BASE_ADDR		0xB6000000
+#define CS5_BASE_ADDR_VIRT	0xF6000000
+#define CS5_SIZE		SZ_32M
+
 #define PCMCIA_MEM_BASE_ADDR	0xBC000000
 
 /*
@@ -191,6 +194,9 @@
 #define CS4_IO_ADDRESS(x)  \
 	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
 
+#define CS5_IO_ADDRESS(x)  \
+	(((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT)
+
 #define X_MEMC_IO_ADDRESS(x)  \
 	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
 
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
deleted file mode 100644
index 6c19a134744..00000000000
--- a/arch/arm/plat-mxc/include/mach/mxc_timer.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * mxc_timer.h
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_TIMER_H
-#define __PLAT_MXC_TIMER_H
-
-#include <linux/clk.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_MX1
-#define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
-#define TIMER_INTERRUPT		TIM1_INT
-
-#define TCTL_VAL		TCTL_CLK_PCLK1
-#define TCTL_IRQEN		(1<<4)
-#define TCTL_FRR		(1<<8)
-#define TCTL_CLK_PCLK1		(1<<1)
-#define TCTL_CLK_PCLK1_4	(2<<1)
-#define TCTL_CLK_TIN		(3<<1)
-#define TCTL_CLK_32		(4<<1)
-
-#define MXC_TCTL   0x00
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT		(1<<1)
-#define TSTAT_COMP		(1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-				TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	__raw_writel(0, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX1 */
-
-#ifdef CONFIG_ARCH_MX2
-#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT		MXC_INT_GPT1
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL		TCTL_CLK_PCLK1
-#define TCTL_CLK_PCLK1		(1<<1)
-#define TCTL_CLK_PCLK1_4	(2<<1)
-#define TCTL_IRQEN		(1<<4)
-#define TCTL_FRR		(1<<8)
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT		(1<<1)
-#define TSTAT_COMP		(1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-				TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	__raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX2 */
-
-#ifdef CONFIG_ARCH_MX3
-#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT		MXC_INT_GPT
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL		(TCTL_CLK_IPG | TCTL_WAITEN)
-#define TCTL_CLK_IPG		(1<<6)
-#define TCTL_FRR		(1<<9)
-#define TCTL_WAITEN		(1<<3)
-
-#define MXC_TPRER  0x04
-#define MXC_TSTAT  0x08
-#define TSTAT_OF1		(1<<0)
-#define TSTAT_OF2		(1<<1)
-#define TSTAT_OF3		(1<<2)
-#define TSTAT_IF1		(1<<3)
-#define TSTAT_IF2		(1<<4)
-#define TSTAT_ROV		(1<<5)
-#define MXC_IR     0x0c
-#define MXC_TCMP   0x10
-#define MXC_TCMP2  0x14
-#define MXC_TCMP3  0x18
-#define MXC_TCR    0x1c
-#define MXC_TCN    0x24
-
-static inline void gpt_irq_disable(void)
-{
-	__raw_writel(0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(1<<0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_acknowledge(void)
-{
-	__raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX3 */
-
-#define TCTL_SWR		(1<<15)
-#define TCTL_CC			(1<<10)
-#define TCTL_OM			(1<<9)
-#define TCTL_CAP_RIS		(1<<6)
-#define TCTL_CAP_FAL		(2<<6)
-#define TCTL_CAP_RIS_FAL	(3<<6)
-#define TCTL_CAP_ENA		(1<<5)
-#define TCTL_TEN		(1<<0)
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h
index 2dacb3086f1..be273371f34 100644
--- a/arch/arm/plat-mxc/include/mach/usb.h
+++ b/arch/arm/plat-mxc/include/mach/usb.h
@@ -17,7 +17,7 @@
 
 struct imxusb_platform_data {
 	int (*init)(struct device *);
-	int (*exit)(struct device *);
+	void (*exit)(struct device *);
 };
 
 #endif /* __ASM_ARCH_MXC_USB */
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
new file mode 100644
index 00000000000..77a078f9513
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *                       <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v3.h>
+
+#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+
+static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
+
+/*
+ * setups a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
+{
+	unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
+		return -EBUSY;
+	if (pad->mux_ctrl_ofs)
+		__raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+
+	if (pad->select_input_ofs)
+		__raw_writel(pad->select_input,
+				IOMUX_BASE + pad->select_input_ofs);
+
+	if (!(pad->pad_ctrl & NO_PAD_CTRL))
+		__raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
+
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
+{
+	struct pad_desc *p = pad_list;
+	int i;
+	int ret;
+
+	for (i = 0; i < count; i++) {
+		ret = mxc_iomux_v3_setup_pad(p);
+		if (ret)
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_v3_release_multiple_pads(pad_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
+
+void mxc_iomux_v3_release_pad(struct pad_desc *pad)
+{
+	unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+	clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
+
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
+{
+	struct pad_desc *p = pad_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_v3_release_pad(p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 0fb68a531f5..8aee76304f8 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -24,31 +24,27 @@
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
 
-#define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
-#define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
-#define AVIC_NIMASK		(AVIC_BASE + 0x04)	/* int mask reg */
-#define AVIC_INTENNUM		(AVIC_BASE + 0x08)	/* int enable number reg */
-#define AVIC_INTDISNUM		(AVIC_BASE + 0x0C)	/* int disable number reg */
-#define AVIC_INTENABLEH		(AVIC_BASE + 0x10)	/* int enable reg high */
-#define AVIC_INTENABLEL		(AVIC_BASE + 0x14)	/* int enable reg low */
-#define AVIC_INTTYPEH		(AVIC_BASE + 0x18)	/* int type reg high */
-#define AVIC_INTTYPEL		(AVIC_BASE + 0x1C)	/* int type reg low */
-#define AVIC_NIPRIORITY(x)	(AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */
-#define AVIC_NIVECSR		(AVIC_BASE + 0x40)	/* norm int vector/status */
-#define AVIC_FIVECSR		(AVIC_BASE + 0x44)	/* fast int vector/status */
-#define AVIC_INTSRCH		(AVIC_BASE + 0x48)	/* int source reg high */
-#define AVIC_INTSRCL		(AVIC_BASE + 0x4C)	/* int source reg low */
-#define AVIC_INTFRCH		(AVIC_BASE + 0x50)	/* int force reg high */
-#define AVIC_INTFRCL		(AVIC_BASE + 0x54)	/* int force reg low */
-#define AVIC_NIPNDH		(AVIC_BASE + 0x58)	/* norm int pending high */
-#define AVIC_NIPNDL		(AVIC_BASE + 0x5C)	/* norm int pending low */
-#define AVIC_FIPNDH		(AVIC_BASE + 0x60)	/* fast int pending high */
-#define AVIC_FIPNDL		(AVIC_BASE + 0x64)	/* fast int pending low */
-
-#define SYSTEM_PREV_REG		IO_ADDRESS(IIM_BASE_ADDR + 0x20)
-#define SYSTEM_SREV_REG		IO_ADDRESS(IIM_BASE_ADDR + 0x24)
-#define IIM_PROD_REV_SH		3
-#define IIM_PROD_REV_LEN	5
+#define AVIC_INTCNTL		0x00	/* int control reg */
+#define AVIC_NIMASK		0x04	/* int mask reg */
+#define AVIC_INTENNUM		0x08	/* int enable number reg */
+#define AVIC_INTDISNUM		0x0C	/* int disable number reg */
+#define AVIC_INTENABLEH		0x10	/* int enable reg high */
+#define AVIC_INTENABLEL		0x14	/* int enable reg low */
+#define AVIC_INTTYPEH		0x18	/* int type reg high */
+#define AVIC_INTTYPEL		0x1C	/* int type reg low */
+#define AVIC_NIPRIORITY(x)	(0x20 + 4 * (7 - (x))) /* int priority */
+#define AVIC_NIVECSR		0x40	/* norm int vector/status */
+#define AVIC_FIVECSR		0x44	/* fast int vector/status */
+#define AVIC_INTSRCH		0x48	/* int source reg high */
+#define AVIC_INTSRCL		0x4C	/* int source reg low */
+#define AVIC_INTFRCH		0x50	/* int force reg high */
+#define AVIC_INTFRCL		0x54	/* int force reg low */
+#define AVIC_NIPNDH		0x58	/* norm int pending high */
+#define AVIC_NIPNDL		0x5C	/* norm int pending low */
+#define AVIC_FIPNDH		0x60	/* fast int pending high */
+#define AVIC_FIPNDL		0x64	/* fast int pending low */
+
+static void __iomem *avic_base;
 
 int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
@@ -59,11 +55,11 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 	if (irq >= MXC_INTERNAL_IRQS)
 		return -EINVAL;;
 
-	temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
+	temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
 	temp &= ~mask;
 	temp |= prio & mask;
 
-	__raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+	__raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
 
 	return 0;
 #else
@@ -81,12 +77,12 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	if (irq < MXC_INTERNAL_IRQS / 2) {
-		irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
+		irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
 	} else {
 		irq -= MXC_INTERNAL_IRQS / 2;
-		irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
+		irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
 	}
 
 	return 0;
@@ -97,13 +93,13 @@ EXPORT_SYMBOL(mxc_set_irq_fiq);
 /* Disable interrupt number "irq" in the AVIC */
 static void mxc_mask_irq(unsigned int irq)
 {
-	__raw_writel(irq, AVIC_INTDISNUM);
+	__raw_writel(irq, avic_base + AVIC_INTDISNUM);
 }
 
 /* Enable interrupt number "irq" in the AVIC */
 static void mxc_unmask_irq(unsigned int irq)
 {
-	__raw_writel(irq, AVIC_INTENNUM);
+	__raw_writel(irq, avic_base + AVIC_INTENNUM);
 }
 
 static struct irq_chip mxc_avic_chip = {
@@ -121,19 +117,21 @@ void __init mxc_init_irq(void)
 {
 	int i;
 
+	avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
 	 */
-	__raw_writel(0, AVIC_INTCNTL);
-	__raw_writel(0x1f, AVIC_NIMASK);
+	__raw_writel(0, avic_base + AVIC_INTCNTL);
+	__raw_writel(0x1f, avic_base + AVIC_NIMASK);
 
 	/* disable all interrupts */
-	__raw_writel(0, AVIC_INTENABLEH);
-	__raw_writel(0, AVIC_INTENABLEL);
+	__raw_writel(0, avic_base + AVIC_INTENABLEH);
+	__raw_writel(0, avic_base + AVIC_INTENABLEL);
 
 	/* all IRQ no FIQ */
-	__raw_writel(0, AVIC_INTTYPEH);
-	__raw_writel(0, AVIC_INTTYPEL);
+	__raw_writel(0, avic_base + AVIC_INTTYPEH);
+	__raw_writel(0, avic_base + AVIC_INTTYPEL);
 	for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
 		set_irq_chip(i, &mxc_avic_chip);
 		set_irq_handler(i, handle_level_irq);
@@ -142,7 +140,7 @@ void __init mxc_init_irq(void)
 
 	/* Set default priority value (0) for all IRQ's */
 	for (i = 0; i < 8; i++)
-		__raw_writel(0, AVIC_NIPRIORITY(i));
+		__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
 
 	/* init architectures chained interrupt handler */
 	mxc_register_gpios();
@@ -154,3 +152,4 @@ void __init mxc_init_irq(void)
 
 	printk(KERN_INFO "MXC IRQ initialized\n");
 }
+
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 9bffbc507cc..ae34198a79d 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -15,65 +15,26 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/pwm.h>
+#include <mach/hardware.h>
+
+
+/* i.MX1 and i.MX21 share the same PWM function block: */
+
+#define MX1_PWMC    0x00   /* PWM Control Register */
+#define MX1_PWMS    0x04   /* PWM Sample Register */
+#define MX1_PWMP    0x08   /* PWM Period Register */
+
+
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
+
+#define MX3_PWMCR                 0x00    /* PWM Control Register */
+#define MX3_PWMSAR                0x0C    /* PWM Sample Register */
+#define MX3_PWMPR                 0x10    /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_EN              (1 << 0)
+
 
-#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
-#define PWM_VER_1
-
-#define PWMCR	0x00	/* PWM Control Register		*/
-#define PWMSR	0x04	/* PWM Sample Register		*/
-#define PWMPR	0x08	/* PWM Period Register		*/
-#define PWMCNR	0x0C	/* PWM Counter Register		*/
-
-#define PWMCR_HCTR		(1 << 18)		/* Halfword FIFO Data Swapping	*/
-#define PWMCR_BCTR		(1 << 17)		/* Byte FIFO Data Swapping	*/
-#define PWMCR_SWR		(1 << 16)		/* Software Reset		*/
-#define PWMCR_CLKSRC_PERCLK	(0 << 15)		/* PERCLK Clock Source		*/
-#define PWMCR_CLKSRC_CLK32	(1 << 15)		/* 32KHz Clock Source		*/
-#define PWMCR_PRESCALER(x)	(((x - 1) & 0x7F) << 8)	/* PRESCALER			*/
-#define PWMCR_IRQ		(1 << 7)		/* Interrupt Request		*/
-#define PWMCR_IRQEN		(1 << 6)		/* Interrupt Request Enable	*/
-#define PWMCR_FIFOAV		(1 << 5)		/* FIFO Available		*/
-#define PWMCR_EN		(1 << 4)		/* Enables/Disables the PWM	*/
-#define PWMCR_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
-#define PWMCR_DIV(x)		(((x) & 0x03) << 0)	/* Clock divider 2/4/8/16	*/
-
-#define MAX_DIV			(128 * 16)
-#endif
-
-#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
-#define PWM_VER_2
-
-#define PWMCR	0x00	/* PWM Control Register		*/
-#define PWMSR	0x04	/* PWM Status Register		*/
-#define PWMIR	0x08	/* PWM Interrupt Register	*/
-#define PWMSAR	0x0C	/* PWM Sample Register		*/
-#define PWMPR	0x10	/* PWM Period Register		*/
-#define PWMCNR	0x14	/* PWM Counter Register		*/
-
-#define PWMCR_EN		(1 << 0)		/* Enables/Disables the PWM	*/
-#define PWMCR_REPEAT(x)		(((x) & 0x03) << 1)	/* Sample Repeats		*/
-#define PWMCR_SWR		(1 << 3)		/* Software Reset		*/
-#define PWMCR_PRESCALER(x)	(((x - 1) & 0xFFF) << 4)/* PRESCALER			*/
-#define PWMCR_CLKSRC(x)		(((x) & 0x3) << 16)
-#define PWMCR_CLKSRC_OFF	(0 << 16)
-#define PWMCR_CLKSRC_IPG	(1 << 16)
-#define PWMCR_CLKSRC_IPG_HIGH	(2 << 16)
-#define PWMCR_CLKSRC_CLK32	(3 << 16)
-#define PWMCR_POUTC
-#define PWMCR_HCTR		(1 << 20)		/* Halfword FIFO Data Swapping	*/
-#define PWMCR_BCTR		(1 << 21)		/* Byte FIFO Data Swapping	*/
-#define PWMCR_DBGEN		(1 << 22)		/* Debug Mode			*/
-#define PWMCR_WAITEN		(1 << 23)		/* Wait Mode			*/
-#define PWMCR_DOZEN		(1 << 24)		/* Doze Mode			*/
-#define PWMCR_STOPEN		(1 << 25)		/* Stop Mode			*/
-#define PWMCR_FWM(x)		(((x) & 0x3) << 26)	/* FIFO Water Mark		*/
-
-#define MAX_DIV 4096
-#endif
-
-#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
-#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
-#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
 
 struct pwm_device {
 	struct list_head	node;
@@ -91,32 +52,52 @@ struct pwm_device {
 
 int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 {
-	unsigned long long c;
-	unsigned long period_cycles, duty_cycles, prescale;
-
 	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	c = clk_get_rate(pwm->clk);
-	c = c * period_ns;
-	do_div(c, 1000000000);
-	period_cycles = c;
-
-	prescale = period_cycles / 0x10000 + 1;
-
-	period_cycles /= prescale;
-	c = (unsigned long long)period_cycles * duty_ns;
-	do_div(c, period_ns);
-	duty_cycles = c;
-
-#ifdef PWM_VER_2
-	writel(duty_cycles, pwm->mmio_base + PWMSAR);
-	writel(period_cycles, pwm->mmio_base + PWMPR);
-	writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
-			pwm->mmio_base + PWMCR);
-#elif defined PWM_VER_1
-#error PWM not yet working on MX1 / MX21
-#endif
+	if (cpu_is_mx27() || cpu_is_mx3()) {
+		unsigned long long c;
+		unsigned long period_cycles, duty_cycles, prescale;
+		c = clk_get_rate(pwm->clk);
+		c = c * period_ns;
+		do_div(c, 1000000000);
+		period_cycles = c;
+
+		prescale = period_cycles / 0x10000 + 1;
+
+		period_cycles /= prescale;
+		c = (unsigned long long)period_cycles * duty_ns;
+		do_div(c, period_ns);
+		duty_cycles = c;
+
+		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
+		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
+		writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+			MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
+			pwm->mmio_base + MX3_PWMCR);
+	} else if (cpu_is_mx1() || cpu_is_mx21()) {
+		/* The PWM subsystem allows for exact frequencies. However,
+		 * I cannot connect a scope on my device to the PWM line and
+		 * thus cannot provide the program the PWM controller
+		 * exactly. Instead, I'm relying on the fact that the
+		 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+		 * function group already. So I'll just modify the PWM sample
+		 * register to follow the ratio of duty_ns vs. period_ns
+		 * accordingly.
+		 *
+		 * This is good enought for programming the brightness of
+		 * the LCD backlight.
+		 *
+		 * The real implementation would divide PERCLK[0] first by
+		 * both the prescaler (/1 .. /128) and then by CLKSEL
+		 * (/2 .. /16).
+		 */
+		u32 max = readl(pwm->mmio_base + MX1_PWMP);
+		u32 p = max * duty_ns / period_ns;
+		writel(max - p, pwm->mmio_base + MX1_PWMS);
+	} else {
+		BUG();
+	}
 
 	return 0;
 }
@@ -297,4 +278,3 @@ module_exit(mxc_pwm_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index dab3357196f..88fb3a57e02 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -29,22 +29,85 @@
 #include <mach/hardware.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
-#include <mach/mxc_timer.h>
+
+/* defines common for all i.MX */
+#define MXC_TCTL		0x00
+#define MXC_TCTL_TEN		(1 << 0)
+#define MXC_TPRER		0x04
+
+/* MX1, MX21, MX27 */
+#define MX1_2_TCTL_CLK_PCLK1	(1 << 1)
+#define MX1_2_TCTL_IRQEN	(1 << 4)
+#define MX1_2_TCTL_FRR		(1 << 8)
+#define MX1_2_TCMP		0x08
+#define MX1_2_TCN		0x10
+#define MX1_2_TSTAT		0x14
+
+/* MX21, MX27 */
+#define MX2_TSTAT_CAPT		(1 << 1)
+#define MX2_TSTAT_COMP		(1 << 0)
+
+/* MX31, MX35 */
+#define MX3_TCTL_WAITEN		(1 << 3)
+#define MX3_TCTL_CLK_IPG	(1 << 6)
+#define MX3_TCTL_FRR		(1 << 9)
+#define MX3_IR			0x0c
+#define MX3_TSTAT		0x08
+#define MX3_TSTAT_OF1		(1 << 0)
+#define MX3_TCN			0x24
+#define MX3_TCMP		0x10
 
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
-/* clock source */
+static void __iomem *timer_base;
 
-static cycle_t mxc_get_cycles(struct clocksource *cs)
+static inline void gpt_irq_disable(void)
 {
-	return __raw_readl(TIMER_BASE + MXC_TCN);
+	unsigned int tmp;
+
+	if (cpu_is_mx3())
+		__raw_writel(0, timer_base + MX3_IR);
+	else {
+		tmp = __raw_readl(timer_base + MXC_TCTL);
+		__raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
+	}
+}
+
+static inline void gpt_irq_enable(void)
+{
+	if (cpu_is_mx3())
+		__raw_writel(1<<0, timer_base + MX3_IR);
+	else {
+		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
+			timer_base + MXC_TCTL);
+	}
+}
+
+static void gpt_irq_acknowledge(void)
+{
+	if (cpu_is_mx1())
+		__raw_writel(0, timer_base + MX1_2_TSTAT);
+	if (cpu_is_mx2())
+		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
+	if (cpu_is_mx3())
+		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
+}
+
+static cycle_t mx1_2_get_cycles(struct clocksource *cs)
+{
+	return __raw_readl(timer_base + MX1_2_TCN);
+}
+
+static cycle_t mx3_get_cycles(struct clocksource *cs)
+{
+	return __raw_readl(timer_base + MX3_TCN);
 }
 
 static struct clocksource clocksource_mxc = {
 	.name 		= "mxc_timer1",
 	.rating		= 200,
-	.read		= mxc_get_cycles,
+	.read		= mx1_2_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift 		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -54,6 +117,9 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
+	if (cpu_is_mx3())
+		clocksource_mxc.read = mx3_get_cycles;
+
 	clocksource_mxc.mult = clocksource_hz2mult(c,
 					clocksource_mxc.shift);
 	clocksource_register(&clocksource_mxc);
@@ -63,15 +129,29 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 
 /* clock event */
 
-static int mxc_set_next_event(unsigned long evt,
+static int mx1_2_set_next_event(unsigned long evt,
 			      struct clock_event_device *unused)
 {
 	unsigned long tcmp;
 
-	tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
-	__raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
+	tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
 
-	return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
+	__raw_writel(tcmp, timer_base + MX1_2_TCMP);
+
+	return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
+				-ETIME : 0;
+}
+
+static int mx3_set_next_event(unsigned long evt,
+			      struct clock_event_device *unused)
+{
+	unsigned long tcmp;
+
+	tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+
+	__raw_writel(tcmp, timer_base + MX3_TCMP);
+
+	return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
 				-ETIME : 0;
 }
 
@@ -100,8 +180,13 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		__raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
-				TIMER_BASE + MXC_TCMP);
+		if (cpu_is_mx3())
+			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
+					timer_base + MX3_TCMP);
+		else
+			__raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
+					timer_base + MX1_2_TCMP);
+
 		/* Clear pending interrupt */
 		gpt_irq_acknowledge();
 	}
@@ -148,7 +233,10 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
+	if (cpu_is_mx3())
+		tstat = __raw_readl(timer_base + MX3_TSTAT);
+	else
+		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
 
 	gpt_irq_acknowledge();
 
@@ -168,7 +256,7 @@ static struct clock_event_device clockevent_mxc = {
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
 	.set_mode	= mxc_set_mode,
-	.set_next_event	= mxc_set_next_event,
+	.set_next_event	= mx1_2_set_next_event,
 	.rating		= 200,
 };
 
@@ -176,6 +264,9 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
+	if (cpu_is_mx3())
+		clockevent_mxc.set_next_event = mx3_set_next_event;
+
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
 					clockevent_mxc.shift);
 	clockevent_mxc.max_delta_ns =
@@ -192,23 +283,47 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 
 void __init mxc_timer_init(struct clk *timer_clk)
 {
+	uint32_t tctl_val;
+	int irq;
+
 	clk_enable(timer_clk);
 
+	if (cpu_is_mx1()) {
+#ifdef CONFIG_ARCH_MX1
+		timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
+		irq = TIM1_INT;
+#endif
+	} else if (cpu_is_mx2()) {
+#ifdef CONFIG_ARCH_MX2
+		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+		irq = MXC_INT_GPT1;
+#endif
+	} else if (cpu_is_mx3()) {
+#ifdef CONFIG_ARCH_MX3
+		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+		irq = MXC_INT_GPT;
+#endif
+	} else
+		BUG();
+
 	/*
 	 * Initialise to a known state (all timers off, and timing reset)
 	 */
-	__raw_writel(0, TIMER_BASE + MXC_TCTL);
-	__raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
 
-	__raw_writel(TCTL_FRR |	/* free running */
-		     TCTL_VAL |	/* set clocksource and arch specific bits */
-		     TCTL_TEN,	/* start the timer */
-		     TIMER_BASE + MXC_TCTL);
+	__raw_writel(0, timer_base + MXC_TCTL);
+	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
+
+	if (cpu_is_mx3())
+		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+	else
+		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+
+	__raw_writel(tctl_val, timer_base + MXC_TCTL);
 
 	/* init and register the timer to the framework */
 	mxc_clocksource_init(timer_clk);
 	mxc_clockevent_init(timer_clk);
 
 	/* Make irqs happen */
-	setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
+	setup_irq(irq, &mxc_timer_irq);
 }
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 9dd68fafb37..efe85d09519 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -23,6 +23,11 @@ config ARCH_OMAP3
 	select CPU_V7
 	select COMMON_CLKDEV
 
+config ARCH_OMAP4
+	bool "TI OMAP4"
+	select CPU_V7
+	select ARM_GIC
+
 endchoice
 
 comment "OMAP Feature Selections"
@@ -40,7 +45,6 @@ config OMAP_DEBUG_LEDS
 config OMAP_DEBUG_POWERDOMAIN
 	bool "Emit debug messages from powerdomain layer"
 	depends on ARCH_OMAP2 || ARCH_OMAP3
-	default n
 	help
 	  Say Y here if you want to compile in powerdomain layer
 	  debugging messages for OMAP2/3.   These messages can
@@ -52,7 +56,6 @@ config OMAP_DEBUG_POWERDOMAIN
 config OMAP_DEBUG_CLOCKDOMAIN
 	bool "Emit debug messages from clockdomain layer"
 	depends on ARCH_OMAP2 || ARCH_OMAP3
-	default n
 	help
 	  Say Y here if you want to compile in clockdomain layer
 	  debugging messages for OMAP2/3.   These messages can
@@ -110,11 +113,13 @@ config OMAP_MCBSP
 config OMAP_MBOX_FWK
 	tristate "Mailbox framework support"
 	depends on ARCH_OMAP
-	default n
 	help
 	  Say Y here if you want to use OMAP Mailbox framework support for
 	  DSP, IVA1.0 and IVA2 in OMAP1/2/3.
 
+config OMAP_IOMMU
+	tristate
+
 choice
         prompt "System timer"
 	default OMAP_MPU_TIMER
@@ -128,13 +133,13 @@ config OMAP_MPU_TIMER
 
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
 	  support for no tick during idle. The 32KHz timer provides less
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP16XX, 24XX and 34XX.
+	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
 
 endchoice
 
@@ -149,7 +154,7 @@ config OMAP_32K_TIMER_HZ
 
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
 	help
 	 Select this option if you want to use OMAP Dual-Mode timers.
 
@@ -171,7 +176,7 @@ endchoice
 
 config OMAP_SERIAL_WAKE
 	bool "Enable wake-up events for serial ports"
-	depends on OMAP_MUX
+	depends on ARCH_OMAP1 && OMAP_MUX
 	default y
 	help
 	  Select this option if you want to have your system wake up
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 04a100cfb8e..a8327952395 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -13,6 +13,7 @@ obj-  :=
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
 
 obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 29efc279287..e8c327a45a5 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,10 +36,40 @@ static struct clk_functions *arch_clock;
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
+/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
+ * clock framework is not up , it is defined here to avoid rework in
+ * every driver. Also dummy prcm reset function is added */
+
+/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */
+#if defined(CONFIG_ARCH_OMAP4)
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+void omap2_clk_prepare_for_reboot(void)
+{
+}
+EXPORT_SYMBOL(omap2_clk_prepare_for_reboot);
+
+void omap_prcm_arch_reset(char mode)
+{
+}
+EXPORT_SYMBOL(omap_prcm_arch_reset);
+#endif
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 	int ret = 0;
+	if (cpu_is_omap44xx())
+		/* OMAP4 clk framework not supported yet */
+		return 0;
 
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
@@ -140,6 +170,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	unsigned long flags;
 	int ret = -EINVAL;
 
+	if (cpu_is_omap44xx())
+	/* OMAP4 clk framework not supported yet */
+		return 0;
 	if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
 		return ret;
 
@@ -240,13 +273,13 @@ void recalculate_root_clocks(void)
 }
 
 /**
- * clk_init_one - initialize any fields in the struct clk before clk init
+ * clk_preinit - initialize any fields in the struct clk before clk init
  * @clk: struct clk * to initialize
  *
  * Initialize any struct clk fields needed before normal clk initialization
  * can run.  No return value.
  */
-void clk_init_one(struct clk *clk)
+void clk_preinit(struct clk *clk)
 {
 	INIT_LIST_HEAD(&clk->children);
 }
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 433021f3d7c..ebcf006406f 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -2,6 +2,10 @@
  * linux/arch/arm/plat-omap/common.c
  *
  * Code common to all OMAP machines.
+ * The file is created by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
 #include <linux/console.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
@@ -175,25 +178,70 @@ console_initcall(omap_add_serial_console);
  * but systems won't necessarily want to spend resources that way.
  */
 
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED		0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-#define TIMER_32K_SYNCHRONIZED		(OMAP2_32KSYNCT_BASE + 0x10)
-#endif
+#define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
 
-#ifdef	TIMER_32K_SYNCHRONIZED
+#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
 
 #include <linux/clocksource.h>
 
-static cycle_t omap_32k_read(struct clocksource *cs)
+#ifdef CONFIG_ARCH_OMAP16XX
+static cycle_t omap16xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+}
+#else
+#define omap16xx_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+static cycle_t omap2420_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2420_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static cycle_t omap2430_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2430_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static cycle_t omap34xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap34xx_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
 {
-	return omap_readl(TIMER_32K_SYNCHRONIZED);
+	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap44xx_32k_read	NULL
+#endif
+
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t omap_32k_read_dummy(struct clocksource *cs)
+{
+	return 0;
 }
 
 static struct clocksource clocksource_32k = {
 	.name		= "32k_counter",
 	.rating		= 250,
-	.read		= omap_32k_read,
+	.read		= omap_32k_read_dummy,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 10,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -207,7 +255,7 @@ unsigned long long sched_clock(void)
 {
 	unsigned long long ret;
 
-	ret = (unsigned long long)omap_32k_read(&clocksource_32k);
+	ret = (unsigned long long)clocksource_32k.read(&clocksource_32k);
 	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
 	return ret;
 }
@@ -220,6 +268,19 @@ static int __init omap_init_clocksource_32k(void)
 	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		struct clk *sync_32k_ick;
 
+		if (cpu_is_omap16xx())
+			clocksource_32k.read = omap16xx_32k_read;
+		else if (cpu_is_omap2420())
+			clocksource_32k.read = omap2420_32k_read;
+		else if (cpu_is_omap2430())
+			clocksource_32k.read = omap2430_32k_read;
+		else if (cpu_is_omap34xx())
+			clocksource_32k.read = omap34xx_32k_read;
+		else if (cpu_is_omap44xx())
+			clocksource_32k.read = omap44xx_32k_read;
+		else
+			return -ENODEV;
+
 		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
 		if (sync_32k_ick)
 			clk_enable(sync_32k_ick);
@@ -234,15 +295,13 @@ static int __init omap_init_clocksource_32k(void)
 }
 arch_initcall(omap_init_clocksource_32k);
 
-#endif	/* TIMER_32K_SYNCHRONIZED */
+#endif	/* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
 
 /* Global address base setup code */
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 
-static struct omap_globals *omap2_globals;
-
-static void __init __omap2_set_globals(void)
+static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 {
 	omap2_set_globals_tap(omap2_globals);
 	omap2_set_globals_sdrc(omap2_globals);
@@ -266,8 +325,7 @@ static struct omap_globals omap242x_globals = {
 
 void __init omap2_set_globals_242x(void)
 {
-	omap2_globals = &omap242x_globals;
-	__omap2_set_globals();
+	__omap2_set_globals(&omap242x_globals);
 }
 #endif
 
@@ -285,8 +343,7 @@ static struct omap_globals omap243x_globals = {
 
 void __init omap2_set_globals_243x(void)
 {
-	omap2_globals = &omap243x_globals;
-	__omap2_set_globals();
+	__omap2_set_globals(&omap243x_globals);
 }
 #endif
 
@@ -304,8 +361,23 @@ static struct omap_globals omap343x_globals = {
 
 void __init omap2_set_globals_343x(void)
 {
-	omap2_globals = &omap343x_globals;
-	__omap2_set_globals();
+	__omap2_set_globals(&omap343x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+	.class	= OMAP443X_CLASS,
+	.tap	= OMAP2_IO_ADDRESS(0x4830a000),
+	.ctrl	= OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
+	.prm	= OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
+	.cm	= OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+};
+
+void __init omap2_set_globals_443x(void)
+{
+	omap2_set_globals_tap(&omap4_globals);
+	omap2_set_globals_control(&omap4_globals);
 }
 #endif
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 87fb7ff4179..a64b692a1bf 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -311,6 +311,8 @@ static void omap_init_wdt(void)
 		wdt_resources[0].start = 0x49016000; /* WDT2 */
 	else if (cpu_is_omap343x())
 		wdt_resources[0].start = 0x48314000; /* WDT2 */
+	else if (cpu_is_omap44xx())
+		wdt_resources[0].start = 0x4a314000;
 	else
 		return;
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7fc8c045ad5..def14ec265b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -10,6 +10,9 @@
  * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
  * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * Support functions for the OMAP internal DMA channels.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -310,41 +313,62 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params);
 
 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 {
-	u16 w;
-
 	BUG_ON(omap_dma_in_1510_mode());
 
-	if (cpu_class_is_omap2()) {
-		REVISIT_24XX();
-		return;
-	}
+	if (cpu_class_is_omap1()) {
+		u16 w;
 
-	w = dma_read(CCR2(lch));
-	w &= ~0x03;
+		w = dma_read(CCR2(lch));
+		w &= ~0x03;
 
-	switch (mode) {
-	case OMAP_DMA_CONSTANT_FILL:
-		w |= 0x01;
-		break;
-	case OMAP_DMA_TRANSPARENT_COPY:
-		w |= 0x02;
-		break;
-	case OMAP_DMA_COLOR_DIS:
-		break;
-	default:
-		BUG();
+		switch (mode) {
+		case OMAP_DMA_CONSTANT_FILL:
+			w |= 0x01;
+			break;
+		case OMAP_DMA_TRANSPARENT_COPY:
+			w |= 0x02;
+			break;
+		case OMAP_DMA_COLOR_DIS:
+			break;
+		default:
+			BUG();
+		}
+		dma_write(w, CCR2(lch));
+
+		w = dma_read(LCH_CTRL(lch));
+		w &= ~0x0f;
+		/* Default is channel type 2D */
+		if (mode) {
+			dma_write((u16)color, COLOR_L(lch));
+			dma_write((u16)(color >> 16), COLOR_U(lch));
+			w |= 1;		/* Channel type G */
+		}
+		dma_write(w, LCH_CTRL(lch));
 	}
-	dma_write(w, CCR2(lch));
 
-	w = dma_read(LCH_CTRL(lch));
-	w &= ~0x0f;
-	/* Default is channel type 2D */
-	if (mode) {
-		dma_write((u16)color, COLOR_L(lch));
-		dma_write((u16)(color >> 16), COLOR_U(lch));
-		w |= 1;		/* Channel type G */
+	if (cpu_class_is_omap2()) {
+		u32 val;
+
+		val = dma_read(CCR(lch));
+		val &= ~((1 << 17) | (1 << 16));
+
+		switch (mode) {
+		case OMAP_DMA_CONSTANT_FILL:
+			val |= 1 << 16;
+			break;
+		case OMAP_DMA_TRANSPARENT_COPY:
+			val |= 1 << 17;
+			break;
+		case OMAP_DMA_COLOR_DIS:
+			break;
+		default:
+			BUG();
+		}
+		dma_write(val, CCR(lch));
+
+		color &= 0xffffff;
+		dma_write(color, COLOR(lch));
 	}
-	dma_write(w, LCH_CTRL(lch));
 }
 EXPORT_SYMBOL(omap_set_dma_color_mode);
 
@@ -851,7 +875,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 	}
 	l = dma_read(CCR(lch));
 	l &= ~((1 << 6) | (1 << 26));
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
+	if (cpu_is_omap2430() || cpu_is_omap34xx() ||  cpu_is_omap44xx())
 		l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
 	else
 		l |= ((read_prio & 0x1) << 6);
@@ -1199,7 +1223,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
  * 	     Failure: -EINVAL/-ENOMEM
  */
 int omap_request_dma_chain(int dev_id, const char *dev_name,
-			   void (*callback) (int chain_id, u16 ch_status,
+			   void (*callback) (int lch, u16 ch_status,
 					     void *data),
 			   int *chain_id, int no_of_chans, int chain_mode,
 			   struct omap_dma_channel_params params)
@@ -1823,7 +1847,8 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 #define omap1_dma_irq_handler	NULL
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 
 static int omap2_dma_handle_ch(int ch)
 {
@@ -2318,6 +2343,9 @@ static int __init omap_init_dma(void)
 	} else if (cpu_is_omap34xx()) {
 		omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+	} else if (cpu_is_omap44xx()) {
+		omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
 		return -ENODEV;
@@ -2416,12 +2444,18 @@ static int __init omap_init_dma(void)
 		}
 	}
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
 		omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
 				DMA_DEFAULT_FIFO_DEPTH, 0);
 
-	if (cpu_class_is_omap2())
-		setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+	if (cpu_class_is_omap2()) {
+		int irq;
+		if (cpu_is_omap44xx())
+			irq = INT_44XX_SDMA_IRQ0;
+		else
+			irq = INT_24XX_SDMA_IRQ0;
+		setup_irq(irq, &omap24xx_dma_irq);
+	}
 
 	/* FIXME: Update LCD DMA to work on 24xx */
 	if (cpu_class_is_omap1()) {
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 55bb9963129..7f50b6103de 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -7,6 +7,9 @@
  * OMAP2 support by Juha Yrjola
  * API improvements and OMAP2 clock framework support by Timo Teras
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -150,7 +153,8 @@
 struct omap_dm_timer {
 	unsigned long phys_base;
 	int irq;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 	struct clk *iclk, *fclk;
 #endif
 	void __iomem *io_base;
@@ -169,6 +173,9 @@ struct omap_dm_timer {
 #define omap3_dm_timers			NULL
 #define omap3_dm_source_names		NULL
 #define omap3_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap1_dm_timers[] = {
 	{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
@@ -191,6 +198,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
 #define omap3_dm_timers			NULL
 #define omap3_dm_source_names		NULL
 #define omap3_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap2_dm_timers[] = {
 	{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
@@ -214,7 +224,7 @@ static const char *omap2_dm_source_names[] __initdata = {
 	NULL
 };
 
-static struct clk **omap2_dm_source_clocks[3];
+static struct clk *omap2_dm_source_clocks[3];
 static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
 
 #elif defined(CONFIG_ARCH_OMAP3)
@@ -225,6 +235,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
 #define omap2_dm_timers			NULL
 #define omap2_dm_source_names		NULL
 #define omap2_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap3_dm_timers[] = {
 	{ .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
@@ -247,9 +260,43 @@ static const char *omap3_dm_source_names[] __initdata = {
 	NULL
 };
 
-static struct clk **omap3_dm_source_clocks[2];
+static struct clk *omap3_dm_source_clocks[2];
 static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
 
+#elif defined(CONFIG_ARCH_OMAP4)
+
+#define omap_dm_clk_enable(x)		clk_enable(x)
+#define omap_dm_clk_disable(x)		clk_disable(x)
+#define omap1_dm_timers			NULL
+#define omap2_dm_timers			NULL
+#define omap2_dm_source_names		NULL
+#define omap2_dm_source_clocks		NULL
+#define omap3_dm_timers			NULL
+#define omap3_dm_source_names		NULL
+#define omap3_dm_source_clocks		NULL
+
+static struct omap_dm_timer omap4_dm_timers[] = {
+	{ .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
+	{ .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
+	{ .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
+	{ .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
+	{ .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
+	{ .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
+	{ .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
+	{ .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
+	{ .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
+	{ .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
+	{ .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
+	{ .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+};
+static const char *omap4_dm_source_names[] __initdata = {
+	"sys_ck",
+	"omap_32k_fck",
+	NULL
+};
+static struct clk *omap4_dm_source_clocks[2];
+static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
+
 #else
 
 #error OMAP architecture not supported!
@@ -257,7 +304,7 @@ static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
 #endif
 
 static struct omap_dm_timer *dm_timers;
-static char **dm_source_names;
+static const char **dm_source_names;
 static struct clk **dm_source_clocks;
 
 static spinlock_t dm_timer_lock;
@@ -459,7 +506,8 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
 
-#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+				defined(CONFIG_ARCH_OMAP4)
 
 struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
@@ -705,12 +753,16 @@ int __init omap_dm_timer_init(void)
 		dm_timers = omap1_dm_timers;
 	else if (cpu_is_omap24xx()) {
 		dm_timers = omap2_dm_timers;
-		dm_source_names = (char **)omap2_dm_source_names;
-		dm_source_clocks = (struct clk **)omap2_dm_source_clocks;
+		dm_source_names = omap2_dm_source_names;
+		dm_source_clocks = omap2_dm_source_clocks;
 	} else if (cpu_is_omap34xx()) {
 		dm_timers = omap3_dm_timers;
-		dm_source_names = (char **)omap3_dm_source_names;
-		dm_source_clocks = (struct clk **)omap3_dm_source_clocks;
+		dm_source_names = omap3_dm_source_names;
+		dm_source_clocks = omap3_dm_source_clocks;
+	} else if (cpu_is_omap44xx()) {
+		dm_timers = omap4_dm_timers;
+		dm_source_names = omap4_dm_source_names;
+		dm_source_clocks = omap4_dm_source_clocks;
 	}
 
 	if (cpu_class_is_omap2())
@@ -723,7 +775,8 @@ int __init omap_dm_timer_init(void)
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
 		timer->io_base = IO_ADDRESS(timer->phys_base);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
 			char clk_name[16];
 			sprintf(clk_name, "gpt%d_ick", i + 1);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index ee0b21f5b09..7fd89ba8d3b 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2003-2005 Nokia Corporation
  * Written by Juha Yrjölä <juha.yrjola@nokia.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -146,6 +149,16 @@
 #define OMAP34XX_GPIO5_BASE		IO_ADDRESS(0x49056000)
 #define OMAP34XX_GPIO6_BASE		IO_ADDRESS(0x49058000)
 
+/*
+ * OMAP44XX  specific GPIO registers
+ */
+#define OMAP44XX_GPIO1_BASE             IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE             IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE             IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE             IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE             IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE             IO_ADDRESS(0x4805D000)
+
 #define OMAP_MPUIO_VBASE		IO_ADDRESS(OMAP_MPUIO_BASE)
 
 struct gpio_bank {
@@ -153,11 +166,13 @@ struct gpio_bank {
 	u16 irq;
 	u16 virtual_irq_start;
 	int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||  \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
 
@@ -251,6 +266,24 @@ static struct gpio_bank gpio_bank_34xx[6] = {
 
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+static struct gpio_bank gpio_bank_44xx[6] = {
+	{ OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+		METHOD_GPIO_24XX },
+};
+
+#endif
+
 static struct gpio_bank *gpio_bank;
 static int gpio_bank_count;
 
@@ -273,7 +306,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 	}
 	if (cpu_is_omap24xx())
 		return &gpio_bank[gpio >> 5];
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
 		return &gpio_bank[gpio >> 5];
 	BUG();
 	return NULL;
@@ -285,7 +318,7 @@ static inline int get_gpio_index(int gpio)
 		return gpio & 0x1f;
 	if (cpu_is_omap24xx())
 		return gpio & 0x1f;
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
 		return gpio & 0x1f;
 	return gpio & 0x0f;
 }
@@ -307,7 +340,7 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if (cpu_is_omap24xx() && gpio < 128)
 		return 0;
-	if (cpu_is_omap34xx() && gpio < 192)
+	if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
 		return 0;
 	return -1;
 }
@@ -353,7 +386,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP850_GPIO_DIR_CONTROL;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
@@ -425,7 +459,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -476,7 +511,8 @@ static int __omap_get_gpio_datain(int gpio)
 		reg += OMAP850_GPIO_DATA_INPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
 		break;
@@ -520,7 +556,7 @@ void omap_set_gpio_debounce(int gpio, int enable)
 	else
 		goto done;
 
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		if (enable)
 			clk_enable(bank->dbck);
 		else
@@ -550,7 +586,8 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 						int trigger)
 {
@@ -660,7 +697,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			goto bad;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		set_24xx_gpio_triggering(bank, gpio, trigger);
 		break;
@@ -745,7 +783,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP850_GPIO_INT_STATUS;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
 		break;
@@ -814,7 +853,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
 		mask = 0xffffffff;
@@ -887,7 +927,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+		defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -932,7 +973,8 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (bank->non_wakeup_gpios & (1 << gpio)) {
 			printk(KERN_ERR "Unable to modify wakeup on "
@@ -1017,7 +1059,8 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1069,7 +1112,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_850)
 		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
 #endif
@@ -1346,7 +1390,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
 /*---------------------------------------------------------------------*/
 
 static int initialized;
-#if !defined(CONFIG_ARCH_OMAP3)
+#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
 static struct clk * gpio_ick;
 #endif
 
@@ -1359,7 +1403,7 @@ static struct clk * gpio5_ick;
 static struct clk * gpio5_fck;
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
@@ -1419,8 +1463,8 @@ static int __init _omap_gpio_init(void)
 	}
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3)
-	if (cpu_is_omap34xx()) {
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
 			sprintf(clk_name, "gpio%d_ick", i + 1);
 			gpio_iclks[i] = clk_get(NULL, clk_name);
@@ -1497,6 +1541,17 @@ static int __init _omap_gpio_init(void)
 			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+	if (cpu_is_omap44xx()) {
+		int rev;
+
+		gpio_bank_count = OMAP34XX_NR_GPIOS;
+		gpio_bank = gpio_bank_44xx;
+		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
+			(rev >> 4) & 0x0f, rev & 0x0f);
+	}
+#endif
 	for (i = 0; i < gpio_bank_count; i++) {
 		int j, gpio_count = 16;
 
@@ -1520,7 +1575,8 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32; /* 730 has 32-bit GPIOs */
 		}
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		if (bank->method == METHOD_GPIO_24XX) {
 			static const u32 non_wakeup_gpios[] = {
 				0xe203ffc0, 0x08700040
@@ -1577,7 +1633,7 @@ static int __init _omap_gpio_init(void)
 		set_irq_chained_handler(bank->irq, gpio_irq_handler);
 		set_irq_data(bank->irq, bank);
 
-		if (cpu_is_omap34xx()) {
+		if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 			sprintf(clk_name, "gpio%d_dbck", i + 1);
 			bank->dbck = clk_get(NULL, clk_name);
 			if (IS_ERR(bank->dbck))
@@ -1599,7 +1655,8 @@ static int __init _omap_gpio_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 {
 	int i;
@@ -1622,7 +1679,8 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		case METHOD_GPIO_24XX:
 			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1663,7 +1721,8 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		case METHOD_GPIO_24XX:
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
@@ -1695,7 +1754,8 @@ static struct sys_device omap_gpio_device = {
 
 #endif
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 
 static int workaround_enabled;
 
@@ -1711,7 +1771,8 @@ void omap2_gpio_prepare_for_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 		l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
@@ -1720,7 +1781,8 @@ void omap2_gpio_prepare_for_retention(void)
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
 #endif
@@ -1745,7 +1807,8 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(bank->saved_risingdetect,
@@ -1755,14 +1818,16 @@ void omap2_gpio_resume_after_retention(void)
 		 * state.  If so, generate an IRQ by software.  This is
 		 * horribly racy, but it's the best we can do to work around
 		 * this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 #endif
 		l ^= bank->saved_datain;
 		l &= bank->non_wakeup_gpios;
 		if (l) {
 			u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
@@ -1798,7 +1863,8 @@ static int __init omap_gpio_sysinit(void)
 
 	mpuio_init();
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		if (ret == 0) {
 			ret = sysdev_class_register(&omap_gpio_sysclass);
@@ -1887,7 +1953,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 			irqstat = irq_desc[irq].status;
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||	\
-		defined(CONFIG_ARCH_OMAP34XX)
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 			if (is_in && ((bank->suspend_wakeup & mask)
 					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
 				char	*trigger = NULL;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a303071d5e3..8b848391f0c 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2007 Nokia Corporation.
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 073a2c5569f..f9f65e1ba3f 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -22,7 +22,8 @@ struct clkops {
 	void			(*disable)(struct clk *);
 };
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 
 struct clksel_rate {
 	u32			val;
@@ -51,7 +52,7 @@ struct dpll_data {
 	u8			max_divider;
 	u32			max_tolerance;
 	u16			max_multiplier;
-#  if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	u8			modes;
 	void __iomem		*autoidle_reg;
 	void __iomem		*idlest_reg;
@@ -83,7 +84,8 @@ struct clk {
 	void			(*init)(struct clk *);
 	__u8			enable_bit;
 	__s8			usecount;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 	u8			fixed_div;
 	void __iomem		*clksel_reg;
 	u32			clksel_mask;
@@ -119,7 +121,7 @@ struct clk_functions {
 extern unsigned int mpurate;
 
 extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_init_one(struct clk *clk);
+extern void clk_preinit(struct clk *clk);
 extern int clk_register(struct clk *clk);
 extern void clk_reparent(struct clk *child, struct clk *parent);
 extern void clk_unregister(struct clk *clk);
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 0ecf36deb17..fdeab421b4d 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -33,8 +33,6 @@ struct sys_timer;
 
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
-extern void omap_serial_init(void);
-extern void omap_serial_enable_clocks(int enable);
 #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
 				 struct i2c_board_info const *info,
@@ -62,6 +60,7 @@ struct omap_globals {
 void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_343x(void);
+void omap2_set_globals_443x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 269147f3836..8140dbccb7b 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,9 +1,9 @@
 /*
  * arch/arm/plat-omap/include/mach/control.h
  *
- * OMAP2/3 System Control Module definitions
+ * OMAP2/3/4 System Control Module definitions
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
  * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
@@ -144,6 +144,10 @@
 #define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02b0)
 #define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
 
+/* 34xx D2D idle-related pins, handled by PM core */
+#define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
+#define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
+
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.
@@ -189,8 +193,18 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
+/* CONTROL_IVA2_BOOTMOD bits */
+#define OMAP3_IVA2_BOOTMOD_SHIFT	0
+#define OMAP3_IVA2_BOOTMOD_MASK		(0xf << 0)
+#define OMAP3_IVA2_BOOTMOD_IDLE		(0x1 << 0)
+
+/* CONTROL_PADCONF_X bits */
+#define OMAP3_PADCONF_WAKEUPEVENT0	(1 << 15)
+#define OMAP3_PADCONF_WAKEUPENABLE0	(1 << 14)
+
 #ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 extern void __iomem *omap_ctrl_base_get(void);
 extern u8 omap_ctrl_readb(u16 offset);
 extern u16 omap_ctrl_readw(u16 offset);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 98b14425236..fc60c4ebcc2 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -5,8 +5,12 @@
  *
  * Copyright (C) 2004, 2008 Nokia Corporation
  *
+ * Copyright (C) 2009 Texas Instruments.
+ *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
+ * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -155,6 +159,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
 #define cpu_is_omap243x()		0
 #define cpu_is_omap34xx()		0
 #define cpu_is_omap343x()		0
+#define cpu_is_omap44xx()		0
+#define cpu_is_omap443x()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
@@ -348,12 +354,21 @@ IS_OMAP_TYPE(3430, 0x3430)
 # define cpu_is_omap3430()		is_omap3430()
 #endif
 
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# define cpu_is_omap44xx()		1
+# define cpu_is_omap443x()		1
+# endif
+
 /* Macros to detect if we have OMAP1 or OMAP2 */
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
-#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
+#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
+				cpu_is_omap44xx())
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
@@ -370,6 +385,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP3430_REV_ES3_0	0x34303034
 #define OMAP3430_REV_ES3_1	0x34304034
 
+#define OMAP443X_CLASS		0x44300034
+
 /*
  * omap_chip bits
  *
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b11f5c6a2d..ac24050e341 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -36,7 +36,7 @@
 		add	\rx, \rx, #0x00004000	@ UART 3
 #endif
 
-#elif	CONFIG_ARCH_OMAP3
+#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 		moveq	\rx, #0x48000000	@ physical base address
 		movne	\rx, #0xd8000000	@ virtual base
 		orr	\rx, \rx, #0x0006a000
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 54fe9665b18..8c1eae88737 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -48,6 +48,7 @@
 /* Hardware registers for omap2 and omap3 */
 #define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
 #define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
+#define OMAP44XX_DMA4_BASE		(L4_44XX_BASE + 0x56000)
 
 #define OMAP_DMA4_REVISION		0x00
 #define OMAP_DMA4_GCR			0x78
@@ -144,6 +145,7 @@
 #define OMAP_DMA4_CSSA_U(n)		0
 #define OMAP_DMA4_CDSA_L(n)		0
 #define OMAP_DMA4_CDSA_U(n)		0
+#define OMAP1_DMA_COLOR(n)		0
 
 /*----------------------------------------------------------------------------*/
 
@@ -531,7 +533,7 @@ extern int omap_get_dma_index(int lch, int *ei, int *fi);
 /* Chaining APIs */
 #ifndef CONFIG_ARCH_OMAP1
 extern int omap_request_dma_chain(int dev_id, const char *dev_name,
-				  void (*callback) (int chain_id, u16 ch_status,
+				  void (*callback) (int lch, u16 ch_status,
 						    void *data),
 				  int *chain_id, int no_of_chans,
 				  int chain_mode,
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 2276f89671d..56426ed45ef 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -3,6 +3,9 @@
  *
  * Low-level IRQ helper macros for OMAP-based platforms
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This file is licensed under  the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
@@ -10,6 +13,7 @@
 #include <mach/hardware.h>
 #include <mach/io.h>
 #include <mach/irqs.h>
+#include <asm/hardware/gic.h>
 
 #if defined(CONFIG_ARCH_OMAP1)
 
@@ -56,15 +60,21 @@
 		.endm
 
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 
-#if defined(CONFIG_ARCH_OMAP24XX)
 #include <mach/omap24xx.h>
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
 #include <mach/omap34xx.h>
-#endif
 
+/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
+#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
+#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP24XX_IC_BASE)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+#include <mach/omap44xx.h>
+#endif
 #define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
 #define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
 
@@ -77,6 +87,7 @@
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
+#ifndef CONFIG_ARCH_OMAP4
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\base, =OMAP2_VA_IC_BASE
 		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
@@ -92,6 +103,68 @@
 		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
 
 		.endm
+#else
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an
+		 * interrupt if it's between 30 and 1020.  The test_for_ipi
+		 * routine below will pick up on IPIs.
+		 * A simple read from the controller will tell us the number
+		 * of the highest priority enabled interrupt.
+		 * We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr     \base, =OMAP44XX_VA_GIC_CPU_BASE
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+
+		ldr     \tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc   \irqnr, \irqnr
+		cmpne   \irqnr, \tmp
+		cmpcs   \irqnr, \irqnr
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt
+		 * on the controller, since this requires the original irqstat
+		 * value which we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		it	cc
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		it	cs
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		itt	eq
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
+#endif
 
 		.macro	irq_prio_table
 		.endm
diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
new file mode 100644
index 00000000000..b64fbee4d56
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96	(1 << 4)
+#define GPMC_MUX_ADD_DATA	(1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON		(1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON		(1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+	int	cs;
+	int	gpio_irq;
+	int	gpio_pwrdwn;
+	int	gpio_reset;
+	int	wait_pin;	/* Optional GPMC_CONFIG1_WAITPINSELECT */
+	u32	flags;
+	int	(*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+	defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data	NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 3dc423ed3e8..26c1fbff08a 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -285,5 +285,6 @@
 #include "omap16xx.h"
 #include "omap24xx.h"
 #include "omap34xx.h"
+#include "omap44xx.h"
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
index 577f492f2d3..886248d32b4 100644
--- a/arch/arm/plat-omap/include/mach/hwa742.h
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
@@ -2,10 +2,6 @@
 #define _HWA742_H
 
 struct hwa742_platform_data {
-	void		(*power_up)(struct device *dev);
-	void		(*power_down)(struct device *dev);
-	unsigned long	(*get_clock_rate)(struct device *dev);
-
 	unsigned	te_connected:1;
 };
 
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 0610d7e2b3d..3b281472056 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -6,6 +6,9 @@
  * Copied from arch/arm/mach-sa1100/include/mach/io.h
  * Copyright (C) 1997-1999 Russell King
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -157,6 +160,40 @@
 #define DSP_MMU_34XX_VIRT	0xe2000000
 #define DSP_MMU_34XX_SIZE	SZ_4K
 
+
+#elif defined(CONFIG_ARCH_OMAP4)
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS		L3_44XX_BASE
+#define L3_44XX_VIRT		0xd4000000
+#define L3_44XX_SIZE		SZ_1M
+
+#define L4_44XX_PHYS		L4_44XX_BASE
+#define L4_44XX_VIRT		0xda000000
+#define L4_44XX_SIZE		SZ_4M
+
+
+#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE
+#define L4_WK_44XX_VIRT		0xda300000
+#define L4_WK_44XX_SIZE		SZ_1M
+
+#define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
+#define L4_PER_44XX_VIRT	0xd8000000
+#define L4_PER_44XX_SIZE	SZ_4M
+
+#define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
+#define L4_EMU_44XX_VIRT	0xe4000000
+#define L4_EMU_44XX_SIZE	SZ_64M
+
+#define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
+#define OMAP44XX_GPMC_VIRT	0xe0000000
+#define OMAP44XX_GPMC_SIZE	SZ_1M
+
+
+#define IO_OFFSET		0x90000000
+#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
+
 #endif
 
 #define IO_ADDRESS(pa)		IOMEM(__IO_ADDRESS(pa))
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h
new file mode 100644
index 00000000000..769b00b4c34
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu.h
@@ -0,0 +1,168 @@
+/*
+ * omap iommu: main structures
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU_H
+#define __MACH_IOMMU_H
+
+struct iotlb_entry {
+	u32 da;
+	u32 pa;
+	u32 pgsz, prsvd, valid;
+	union {
+		u16 ap;
+		struct {
+			u32 endian, elsz, mixed;
+		};
+	};
+};
+
+struct iommu {
+	const char	*name;
+	struct module	*owner;
+	struct clk	*clk;
+	void __iomem	*regbase;
+	struct device	*dev;
+
+	unsigned int	refcount;
+	struct mutex	iommu_lock;	/* global for this whole object */
+
+	/*
+	 * We don't change iopgd for a situation like pgd for a task,
+	 * but share it globally for each iommu.
+	 */
+	u32		*iopgd;
+	spinlock_t	page_table_lock; /* protect iopgd */
+
+	int		nr_tlb_entries;
+
+	struct list_head	mmap;
+	struct mutex		mmap_lock; /* protect mmap */
+
+	int (*isr)(struct iommu *obj);
+
+	void *ctx; /* iommu context: registres saved area */
+};
+
+struct cr_regs {
+	union {
+		struct {
+			u16 cam_l;
+			u16 cam_h;
+		};
+		u32 cam;
+	};
+	union {
+		struct {
+			u16 ram_l;
+			u16 ram_h;
+		};
+		u32 ram;
+	};
+};
+
+struct iotlb_lock {
+	short base;
+	short vict;
+};
+
+/* architecture specific functions */
+struct iommu_functions {
+	unsigned long	version;
+
+	int (*enable)(struct iommu *obj);
+	void (*disable)(struct iommu *obj);
+	u32 (*fault_isr)(struct iommu *obj, u32 *ra);
+
+	void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
+	void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr);
+
+	struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e);
+	int (*cr_valid)(struct cr_regs *cr);
+	u32 (*cr_to_virt)(struct cr_regs *cr);
+	void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
+	ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf);
+
+	u32 (*get_pte_attr)(struct iotlb_entry *e);
+
+	void (*save_ctx)(struct iommu *obj);
+	void (*restore_ctx)(struct iommu *obj);
+	ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
+};
+
+struct iommu_platform_data {
+	const char *name;
+	const char *clk_name;
+	const int nr_tlb_entries;
+};
+
+#if defined(CONFIG_ARCH_OMAP1)
+#error "iommu for this processor not implemented yet"
+#else
+#include <mach/iommu2.h>
+#endif
+
+/*
+ * utilities for super page(16MB, 1MB, 64KB and 4KB)
+ */
+
+#define iopgsz_max(bytes)			\
+	(((bytes) >= SZ_16M) ? SZ_16M :		\
+	 ((bytes) >= SZ_1M)  ? SZ_1M  :		\
+	 ((bytes) >= SZ_64K) ? SZ_64K :		\
+	 ((bytes) >= SZ_4K)  ? SZ_4K  :	0)
+
+#define bytes_to_iopgsz(bytes)				\
+	(((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M :	\
+	 ((bytes) == SZ_1M)  ? MMU_CAM_PGSZ_1M  :	\
+	 ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K :	\
+	 ((bytes) == SZ_4K)  ? MMU_CAM_PGSZ_4K  : -1)
+
+#define iopgsz_to_bytes(iopgsz)				\
+	(((iopgsz) == MMU_CAM_PGSZ_16M)	? SZ_16M :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_1M)	? SZ_1M  :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_64K)	? SZ_64K :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_4K)	? SZ_4K  : 0)
+
+#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
+
+/*
+ * global functions
+ */
+extern u32 iommu_arch_version(void);
+
+extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
+extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
+
+extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void flush_iotlb_page(struct iommu *obj, u32 da);
+extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
+extern void flush_iotlb_all(struct iommu *obj);
+
+extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
+
+extern struct iommu *iommu_get(const char *name);
+extern void iommu_put(struct iommu *obj);
+
+extern void iommu_save_ctx(struct iommu *obj);
+extern void iommu_restore_ctx(struct iommu *obj);
+
+extern int install_iommu_arch(const struct iommu_functions *ops);
+extern void uninstall_iommu_arch(const struct iommu_functions *ops);
+
+extern int foreach_iommu_device(void *data,
+				int (*fn)(struct device *, void *));
+
+extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
+extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
+
+#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/mach/iommu2.h
new file mode 100644
index 00000000000..10ad05f410e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu2.h
@@ -0,0 +1,96 @@
+/*
+ * omap iommu: omap2 architecture specific definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU2_H
+#define __MACH_IOMMU2_H
+
+#include <linux/io.h>
+
+/*
+ * MMU Register offsets
+ */
+#define MMU_REVISION		0x00
+#define MMU_SYSCONFIG		0x10
+#define MMU_SYSSTATUS		0x14
+#define MMU_IRQSTATUS		0x18
+#define MMU_IRQENABLE		0x1c
+#define MMU_WALKING_ST		0x40
+#define MMU_CNTL		0x44
+#define MMU_FAULT_AD		0x48
+#define MMU_TTB			0x4c
+#define MMU_LOCK		0x50
+#define MMU_LD_TLB		0x54
+#define MMU_CAM			0x58
+#define MMU_RAM			0x5c
+#define MMU_GFLUSH		0x60
+#define MMU_FLUSH_ENTRY		0x64
+#define MMU_READ_CAM		0x68
+#define MMU_READ_RAM		0x6c
+#define MMU_EMU_FAULT_AD	0x70
+
+#define MMU_REG_SIZE		256
+
+/*
+ * MMU Register bit definitions
+ */
+#define MMU_LOCK_BASE_SHIFT	10
+#define MMU_LOCK_BASE_MASK	(0x1f << MMU_LOCK_BASE_SHIFT)
+#define MMU_LOCK_BASE(x)	\
+	((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
+
+#define MMU_LOCK_VICT_SHIFT	4
+#define MMU_LOCK_VICT_MASK	(0x1f << MMU_LOCK_VICT_SHIFT)
+#define MMU_LOCK_VICT(x)	\
+	((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
+
+#define MMU_CAM_VATAG_SHIFT	12
+#define MMU_CAM_VATAG_MASK \
+	((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
+#define MMU_CAM_P		(1 << 3)
+#define MMU_CAM_V		(1 << 2)
+#define MMU_CAM_PGSZ_MASK	3
+#define MMU_CAM_PGSZ_1M		(0 << 0)
+#define MMU_CAM_PGSZ_64K	(1 << 0)
+#define MMU_CAM_PGSZ_4K		(2 << 0)
+#define MMU_CAM_PGSZ_16M	(3 << 0)
+
+#define MMU_RAM_PADDR_SHIFT	12
+#define MMU_RAM_PADDR_MASK \
+	((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
+#define MMU_RAM_ENDIAN_SHIFT	9
+#define MMU_RAM_ENDIAN_MASK	(1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_BIG	(1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_LITTLE	(0 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ELSZ_SHIFT	7
+#define MMU_RAM_ELSZ_MASK	(3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_8		(0 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_16		(1 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_32		(2 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_NONE	(3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_MIXED_SHIFT	6
+#define MMU_RAM_MIXED_MASK	(1 << MMU_RAM_MIXED_SHIFT)
+#define MMU_RAM_MIXED		MMU_RAM_MIXED_MASK
+
+/*
+ * register accessors
+ */
+static inline u32 iommu_read_reg(struct iommu *obj, size_t offs)
+{
+	return __raw_readl(obj->regbase + offs);
+}
+
+static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs)
+{
+	__raw_writel(val, obj->regbase + offs);
+}
+
+#endif /* __MACH_IOMMU2_H */
diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/mach/iovmm.h
new file mode 100644
index 00000000000..bdc7ce5d7a4
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iovmm.h
@@ -0,0 +1,94 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOMMU_MMAP_H
+#define __IOMMU_MMAP_H
+
+struct iovm_struct {
+	struct iommu		*iommu;	/* iommu object which this belongs to */
+	u32			da_start; /* area definition */
+	u32			da_end;
+	u32			flags; /* IOVMF_: see below */
+	struct list_head	list; /* linked in ascending order */
+	const struct sg_table	*sgt; /* keep 'page' <-> 'da' mapping */
+	void			*va; /* mpu side mapped address */
+};
+
+/*
+ * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
+ *
+ * lower 16 bit is used for h/w and upper 16 bit is for s/w.
+ */
+#define IOVMF_SW_SHIFT		16
+#define IOVMF_HW_SIZE		(1 << IOVMF_SW_SHIFT)
+#define IOVMF_HW_MASK		(IOVMF_HW_SIZE - 1)
+#define IOVMF_SW_MASK		(~IOVMF_HW_MASK)UL
+
+/*
+ * iovma: h/w flags derived from cam and ram attribute
+ */
+#define IOVMF_CAM_MASK		(~((1 << 10) - 1))
+#define IOVMF_RAM_MASK		(~IOVMF_CAM_MASK)
+
+#define IOVMF_PGSZ_MASK		(3 << 0)
+#define IOVMF_PGSZ_1M		MMU_CAM_PGSZ_1M
+#define IOVMF_PGSZ_64K		MMU_CAM_PGSZ_64K
+#define IOVMF_PGSZ_4K		MMU_CAM_PGSZ_4K
+#define IOVMF_PGSZ_16M		MMU_CAM_PGSZ_16M
+
+#define IOVMF_ENDIAN_MASK	(1 << 9)
+#define IOVMF_ENDIAN_BIG	MMU_RAM_ENDIAN_BIG
+#define IOVMF_ENDIAN_LITTLE	MMU_RAM_ENDIAN_LITTLE
+
+#define IOVMF_ELSZ_MASK		(3 << 7)
+#define IOVMF_ELSZ_8		MMU_RAM_ELSZ_8
+#define IOVMF_ELSZ_16		MMU_RAM_ELSZ_16
+#define IOVMF_ELSZ_32		MMU_RAM_ELSZ_32
+#define IOVMF_ELSZ_NONE		MMU_RAM_ELSZ_NONE
+
+#define IOVMF_MIXED_MASK	(1 << 6)
+#define IOVMF_MIXED		MMU_RAM_MIXED
+
+/*
+ * iovma: s/w flags, used for mapping and umapping internally.
+ */
+#define IOVMF_MMIO		(1 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC		(2 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC_MASK	(3 << IOVMF_SW_SHIFT)
+
+/* "superpages" is supported just with physically linear pages */
+#define IOVMF_DISCONT		(1 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR		(2 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR_MASK	(3 << (2 + IOVMF_SW_SHIFT))
+
+#define IOVMF_DA_FIXED		(1 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_ANON		(2 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_MASK		(3 << (4 + IOVMF_SW_SHIFT))
+
+
+extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da);
+extern u32 iommu_vmap(struct iommu *obj, u32 da,
+			const struct sg_table *sgt, u32 flags);
+extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da);
+extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes,
+			   u32 flags);
+extern void iommu_vfree(struct iommu *obj, const u32 da);
+extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+			u32 flags);
+extern void iommu_kunmap(struct iommu *obj, u32 da);
+extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes,
+			   u32 flags);
+extern void iommu_kfree(struct iommu *obj, u32 da);
+
+extern void *da_to_va(struct iommu *obj, u32 da);
+
+#endif /* __IOMMU_MMAP_H */
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 7f57ee66f36..fb7cb772399 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -4,6 +4,9 @@
  *  Copyright (C) Greg Lonnon 2001
  *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -422,6 +425,94 @@
 
 #define	INT_34XX_BENCH_MPU_EMUL	3
 
+
+#define IRQ_GIC_START		32
+#define INT_44XX_LOCALTIMER_IRQ	29
+#define INT_44XX_LOCALWDT_IRQ	30
+
+#define INT_44XX_BENCH_MPU_EMUL	(3 + IRQ_GIC_START)
+#define INT_44XX_SSM_ABORT_IRQ	(6 + IRQ_GIC_START)
+#define INT_44XX_SYS_NIRQ	(7 + IRQ_GIC_START)
+#define INT_44XX_D2D_FW_IRQ	(8 + IRQ_GIC_START)
+#define INT_44XX_PRCM_MPU_IRQ	(11 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ0	(12 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ1	(13 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ2	(14 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ3	(15 + IRQ_GIC_START)
+#define INT_44XX_ISS_IRQ	(24 + IRQ_GIC_START)
+#define INT_44XX_DSS_IRQ	(25 + IRQ_GIC_START)
+#define INT_44XX_MAIL_U0_MPU	(26 + IRQ_GIC_START)
+#define INT_44XX_DSP_MMU	(28 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER1	(37 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER2	(38 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER3	(39 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER4	(40 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER5	(41 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER6	(42 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER7	(43 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER8	(44 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER9	(45 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER10	(46 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER11	(47 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER12	(95 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD5	(51 + IRQ_GIC_START)
+#define INT_44XX_I2C1_IRQ	(56 + IRQ_GIC_START)
+#define INT_44XX_I2C2_IRQ	(57 + IRQ_GIC_START)
+#define INT_44XX_HDQ_IRQ	(58 + IRQ_GIC_START)
+#define INT_44XX_SPI1_IRQ	(65 + IRQ_GIC_START)
+#define INT_44XX_SPI2_IRQ	(66 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_IRQ0	(67 + IRQ_GIC_START)
+#define INT_44XX_HSI_2_IRQ1	(68 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_DMAIRQ	(71 + IRQ_GIC_START)
+#define INT_44XX_UART1_IRQ	(72 + IRQ_GIC_START)
+#define INT_44XX_UART2_IRQ	(73 + IRQ_GIC_START)
+#define INT_44XX_UART3_IRQ	(74 + IRQ_GIC_START)
+#define INT_44XX_UART4_IRQ	(70 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_NISO	(76 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_ISO	(77 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HGEN	(78 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HSOF	(79 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_OTG	(80 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_TX	(81 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_RX	(82 + IRQ_GIC_START)
+#define INT_44XX_MMC_IRQ	(83 + IRQ_GIC_START)
+#define INT_44XX_MMC2_IRQ	(86 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_TX	(89 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_RX	(90 + IRQ_GIC_START)
+#define INT_44XX_SPI3_IRQ	(91 + IRQ_GIC_START)
+#define INT_44XX_SPI5_IRQ	(69 + IRQ_GIC_START)
+
+#define INT_44XX_MCBSP5_IRQ	(16 + IRQ_GIC_START)
+#define INT_44xX_MCBSP1_IRQ	(17 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ	(22 + IRQ_GIC_START)
+#define INT_44XX_MCBSP3_IRQ	(23 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ	(27 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_MC	(92 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_DMA	(93 + IRQ_GIC_START)
+
+#define INT_44XX_GPIO_BANK1	(29 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK2	(30 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK3	(31 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK4	(32 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK5	(33 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK6	(34 + IRQ_GIC_START)
+#define INT_44XX_USIM_IRQ	(35 + IRQ_GIC_START)
+#define INT_44XX_WDT3_IRQ	(36 + IRQ_GIC_START)
+#define INT_44XX_SPI4_IRQ	(48 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD52_IRQ	(49 + IRQ_GIC_START)
+#define INT_44XX_FPKA_READY_IRQ	(50 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD51_IRQ	(51 + IRQ_GIC_START)
+#define INT_44XX_RNG_IRQ	(52 + IRQ_GIC_START)
+#define INT_44XX_I2C3_IRQ	(61 + IRQ_GIC_START)
+#define INT_44XX_FPKA_ERROR_IRQ	(64 + IRQ_GIC_START)
+#define INT_44XX_PBIAS_IRQ	(75 + IRQ_GIC_START)
+#define INT_44XX_OHCI_IRQ	(76 + IRQ_GIC_START)
+#define INT_44XX_EHCI_IRQ	(77 + IRQ_GIC_START)
+#define INT_44XX_TLL_IRQ	(78 + IRQ_GIC_START)
+#define INT_44XX_PARTHASH_IRQ	(79 + IRQ_GIC_START)
+#define INT_44XX_MMC3_IRQ	(94 + IRQ_GIC_START)
+
+
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES	192
@@ -467,6 +558,7 @@
 
 #ifndef __ASSEMBLY__
 extern void omap_init_irq(void);
+extern int omap_irq_pending(void);
 #endif
 
 #include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 232923aaf61..45ea3ae3c99 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -33,7 +33,11 @@ struct omap_kp_platform_data {
 #define GROUP_3		(3 << 16)
 #define GROUP_MASK	GROUP_3
 
+#define KEY_PERSISTENT		0x00800000
+#define KEYNUM_MASK		0x00EFFFFF
 #define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+						KEY_PERSISTENT)
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 99ed564d927..9ad41dc484c 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,8 @@
  */
 #if defined(CONFIG_ARCH_OMAP1)
 #define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 #define PHYS_OFFSET		UL(0x80000000)
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index 24335d4932f..696edfc145a 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -85,23 +85,5 @@
 #define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
 #define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
 
-#if defined(CONFIG_ARCH_OMAP2420)
-
-#define OMAP2_32KSYNCT_BASE	OMAP2420_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE		OMAP2420_PRCM_BASE
-#define OMAP2_CM_BASE		OMAP2420_CM_BASE
-#define OMAP2_PRM_BASE		OMAP2420_PRM_BASE
-#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#elif defined(CONFIG_ARCH_OMAP2430)
-
-#define OMAP2_32KSYNCT_BASE	OMAP2430_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE		OMAP2430_PRCM_BASE
-#define OMAP2_CM_BASE		OMAP2430_CM_BASE
-#define OMAP2_PRM_BASE		OMAP2430_PRM_BASE
-#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#endif
-
 #endif /* __ASM_ARCH_OMAP24XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index ab640151d3e..f8d186a7371 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -31,13 +31,9 @@
 
 #define L4_34XX_BASE		0x48000000
 #define L4_WK_34XX_BASE		0x48300000
-#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
 #define L4_PER_34XX_BASE	0x49000000
-#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
 #define L4_EMU_34XX_BASE	0x54000000
-#define L4_EMU_BASE		L4_EMU_34XX_BASE
 #define L3_34XX_BASE		0x68000000
-#define L3_OMAP_BASE		L3_34XX_BASE
 
 #define OMAP3430_32KSYNCT_BASE	0x48320000
 #define OMAP3430_CM_BASE	0x48004800
@@ -83,15 +79,6 @@
 
 #define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
-#if defined(CONFIG_ARCH_OMAP3430)
-
-#define OMAP2_32KSYNCT_BASE		OMAP3430_32KSYNCT_BASE
-#define OMAP2_CM_BASE			OMAP3430_CM_BASE
-#define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
-
-#endif
-
 #define OMAP34XX_DSP_BASE	0x58000000
 #define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
 #define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
new file mode 100644
index 00000000000..15dec7f1c7c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -0,0 +1,46 @@
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE			0x4a000000
+#define L4_WK_44XX_BASE			0x4a300000
+#define L4_PER_44XX_BASE		0x48000000
+#define L4_EMU_44XX_BASE		0x54000000
+#define L3_44XX_BASE			0x44000000
+#define OMAP4430_32KSYNCT_BASE		0x4a304000
+#define OMAP4430_CM_BASE		0x4a004000
+#define OMAP4430_PRM_BASE		0x48306000
+#define OMAP44XX_GPMC_BASE		0x50000000
+#define OMAP443X_SCM_BASE		0x4a002000
+#define OMAP443X_CTRL_BASE		OMAP443X_SCM_BASE
+#define OMAP44XX_IC_BASE		0x48200000
+#define OMAP44XX_IVA_INTC_BASE		0x40000000
+#define IRQ_SIR_IRQ			0x0040
+#define OMAP44XX_GIC_DIST_BASE		0x48241000
+#define OMAP44XX_GIC_CPU_BASE		0x48240100
+#define OMAP44XX_VA_GIC_CPU_BASE	IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_SCU_BASE		0x48240000
+#define OMAP44XX_VA_SCU_BASE		IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_LOCAL_TWD_BASE		0x48240600
+#define OMAP44XX_VA_LOCAL_TWD_BASE	IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
+#define OMAP44XX_WKUPGEN_BASE		0x48281000
+#define OMAP44XX_VA_WKUPGEN_BASE	IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index 4649d302c26..72f433d7d82 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -9,8 +9,12 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#define ONENAND_SYNC_READ	(1 << 0)
+#define ONENAND_SYNC_READWRITE	(1 << 1)
+
 struct omap_onenand_platform_data {
 	int			cs;
 	int			gpio_irq;
@@ -18,8 +22,22 @@ struct omap_onenand_platform_data {
 	int			nr_parts;
 	int                     (*onenand_setup)(void __iomem *, int freq);
 	int			dma_channel;
+	u8			flags;
 };
 
-int omap2_onenand_rephase(void);
-
 #define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data	NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 8a676a04be4..13abd02d152 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -1,5 +1,8 @@
 /*
- *  arch/arm/plat-omap/include/mach/serial.h
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -15,19 +18,28 @@
 #define OMAP_UART1_BASE		0xfffb0000
 #define OMAP_UART2_BASE		0xfffb0800
 #define OMAP_UART3_BASE		0xfffb9800
+#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP2)
 /* OMAP2 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x4806e000
+#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP3)
 /* OMAP3 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x49020000
+#define OMAP_MAX_NR_PORTS	3
+#elif defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x48020000
+#define OMAP_UART4_BASE		0x4806e000
+#define OMAP_MAX_NR_PORTS	4
 #endif
 
-#define OMAP_MAX_NR_PORTS	3
 #define OMAP1510_BASE_BAUD	(12000000/16)
 #define OMAP16XX_BASE_BAUD	(48000000/16)
 #define OMAP24XX_BASE_BAUD	(48000000/16)
@@ -40,4 +52,13 @@
 			__ret;						\
 			})
 
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+extern int omap_uart_can_sleep(void);
+extern void omap_uart_check_wakeup(void);
+extern void omap_uart_prepare_suspend(void);
+extern void omap_uart_prepare_idle(int num);
+extern void omap_uart_resume_idle(int num);
+#endif
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/mach/smp.h
new file mode 100644
index 00000000000..dcaa8fde706
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/smp.h
@@ -0,0 +1,51 @@
+/*
+ * OMAP4 machine specific smp.h
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_SMP_H
+#define OMAP_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/*
+ * set_event() is used to wake up secondary core from wfe using sev. ROM
+ * code puts the second core into wfe(standby).
+ *
+ */
+#define set_event()	__asm__ __volatile__ ("sev" : : : "memory")
+
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+
+/*
+ * We use Soft IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+
+/*
+ * Read MPIDR: Multiprocessor affinity register
+ */
+#define hard_smp_processor_id()			\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index ab35d622dcf..dca7c16ae90 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -23,7 +23,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
 extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
 				     u32 sdrc_actim_ctrla,
-				     u32 sdrc_actim_ctrlb, u32 m2);
+				     u32 sdrc_actim_ctrlb, u32 m2,
+				     u32 unlock_dll);
 
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -60,7 +61,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
 extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
 					  u32 sdrc_actim_ctrla,
-					  u32 sdrc_actim_ctrlb, u32 m2);
+					  u32 sdrc_actim_ctrlb, u32 m2,
+					  u32 unlock_dll);
 extern unsigned long omap3_sram_configure_core_dpll_sz;
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index 69f0ceed500..f337e1761e2 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -27,13 +27,7 @@
 #define UDC_BASE			OMAP2_UDC_BASE
 #define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
 
-#ifdef CONFIG_USB_MUSB_SOC
 extern void usb_musb_init(void);
-#else
-static inline void usb_musb_init(void)
-{
-}
-#endif
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
index dc104cd9619..b97dfafeebd 100644
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -17,5 +17,5 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END	  (PAGE_OFFSET + 0x18000000)
 
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index af326efc1ad..9b42d72d96c 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -1,3 +1,14 @@
+/*
+ * Common io.c file
+ * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
@@ -7,6 +18,7 @@
 #include <mach/omap16xx.h>
 #include <mach/omap24xx.h>
 #include <mach/omap34xx.h>
+#include <mach/omap44xx.h>
 
 #define BETWEEN(p,st,sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p,pst,vst)	((void __iomem *)((p) - (pst) + (vst)))
@@ -92,7 +104,22 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
 	}
 #endif
-
+#ifdef CONFIG_ARCH_OMAP4
+	if (cpu_is_omap44xx()) {
+		if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
+			return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
+		if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
+			return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
+		if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
+			return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
+		if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
+			return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+		if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
+			return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
+		if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
+			return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
+	}
+#endif
 	return __arm_ioremap(p, size, type);
 }
 EXPORT_SYMBOL(omap_ioremap);
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
new file mode 100644
index 00000000000..4cf449fa2cb
--- /dev/null
+++ b/arch/arm/plat-omap/iommu.c
@@ -0,0 +1,996 @@
+/*
+ * omap iommu: tlb and pagetable primitives
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ *		Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/iommu.h>
+
+#include "iopgtable.h"
+
+/* accommodate the difference between omap1 and omap2/3 */
+static const struct iommu_functions *arch_iommu;
+
+static struct platform_driver omap_iommu_driver;
+static struct kmem_cache *iopte_cachep;
+
+/**
+ * install_iommu_arch - Install archtecure specific iommu functions
+ * @ops:	a pointer to architecture specific iommu functions
+ *
+ * There are several kind of iommu algorithm(tlb, pagetable) among
+ * omap series. This interface installs such an iommu algorighm.
+ **/
+int install_iommu_arch(const struct iommu_functions *ops)
+{
+	if (arch_iommu)
+		return -EBUSY;
+
+	arch_iommu = ops;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(install_iommu_arch);
+
+/**
+ * uninstall_iommu_arch - Uninstall archtecure specific iommu functions
+ * @ops:	a pointer to architecture specific iommu functions
+ *
+ * This interface uninstalls the iommu algorighm installed previously.
+ **/
+void uninstall_iommu_arch(const struct iommu_functions *ops)
+{
+	if (arch_iommu != ops)
+		pr_err("%s: not your arch\n", __func__);
+
+	arch_iommu = NULL;
+}
+EXPORT_SYMBOL_GPL(uninstall_iommu_arch);
+
+/**
+ * iommu_save_ctx - Save registers for pm off-mode support
+ * @obj:	target iommu
+ **/
+void iommu_save_ctx(struct iommu *obj)
+{
+	arch_iommu->save_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_save_ctx);
+
+/**
+ * iommu_restore_ctx - Restore registers for pm off-mode support
+ * @obj:	target iommu
+ **/
+void iommu_restore_ctx(struct iommu *obj)
+{
+	arch_iommu->restore_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_restore_ctx);
+
+/**
+ * iommu_arch_version - Return running iommu arch version
+ **/
+u32 iommu_arch_version(void)
+{
+	return arch_iommu->version;
+}
+EXPORT_SYMBOL_GPL(iommu_arch_version);
+
+static int iommu_enable(struct iommu *obj)
+{
+	int err;
+
+	if (!obj)
+		return -EINVAL;
+
+	clk_enable(obj->clk);
+
+	err = arch_iommu->enable(obj);
+
+	clk_disable(obj->clk);
+	return err;
+}
+
+static void iommu_disable(struct iommu *obj)
+{
+	if (!obj)
+		return;
+
+	clk_enable(obj->clk);
+
+	arch_iommu->disable(obj);
+
+	clk_disable(obj->clk);
+}
+
+/*
+ *	TLB operations
+ */
+void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+	BUG_ON(!cr || !e);
+
+	arch_iommu->cr_to_e(cr, e);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_e);
+
+static inline int iotlb_cr_valid(struct cr_regs *cr)
+{
+	if (!cr)
+		return -EINVAL;
+
+	return arch_iommu->cr_valid(cr);
+}
+
+static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj,
+					     struct iotlb_entry *e)
+{
+	if (!e)
+		return NULL;
+
+	return arch_iommu->alloc_cr(obj, e);
+}
+
+u32 iotlb_cr_to_virt(struct cr_regs *cr)
+{
+	return arch_iommu->cr_to_virt(cr);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_virt);
+
+static u32 get_iopte_attr(struct iotlb_entry *e)
+{
+	return arch_iommu->get_pte_attr(e);
+}
+
+static u32 iommu_report_fault(struct iommu *obj, u32 *da)
+{
+	return arch_iommu->fault_isr(obj, da);
+}
+
+static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l)
+{
+	u32 val;
+
+	val = iommu_read_reg(obj, MMU_LOCK);
+
+	l->base = MMU_LOCK_BASE(val);
+	l->vict = MMU_LOCK_VICT(val);
+
+	BUG_ON(l->base != 0); /* Currently no preservation is used */
+}
+
+static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
+{
+	u32 val;
+
+	BUG_ON(l->base != 0); /* Currently no preservation is used */
+
+	val = (l->base << MMU_LOCK_BASE_SHIFT);
+	val |= (l->vict << MMU_LOCK_VICT_SHIFT);
+
+	iommu_write_reg(obj, val, MMU_LOCK);
+}
+
+static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	arch_iommu->tlb_read_cr(obj, cr);
+}
+
+static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	arch_iommu->tlb_load_cr(obj, cr);
+
+	iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+	iommu_write_reg(obj, 1, MMU_LD_TLB);
+}
+
+/**
+ * iotlb_dump_cr - Dump an iommu tlb entry into buf
+ * @obj:	target iommu
+ * @cr:		contents of cam and ram register
+ * @buf:	output buffer
+ **/
+static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
+				    char *buf)
+{
+	BUG_ON(!cr || !buf);
+
+	return arch_iommu->dump_cr(obj, cr, buf);
+}
+
+/**
+ * load_iotlb_entry - Set an iommu tlb entry
+ * @obj:	target iommu
+ * @e:		an iommu tlb entry info
+ **/
+int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+	int i;
+	int err = 0;
+	struct iotlb_lock l;
+	struct cr_regs *cr;
+
+	if (!obj || !obj->nr_tlb_entries || !e)
+		return -EINVAL;
+
+	clk_enable(obj->clk);
+
+	for (i = 0; i < obj->nr_tlb_entries; i++) {
+		struct cr_regs tmp;
+
+		iotlb_lock_get(obj, &l);
+		l.vict = i;
+		iotlb_lock_set(obj, &l);
+		iotlb_read_cr(obj, &tmp);
+		if (!iotlb_cr_valid(&tmp))
+			break;
+	}
+
+	if (i == obj->nr_tlb_entries) {
+		dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+		err = -EBUSY;
+		goto out;
+	}
+
+	cr = iotlb_alloc_cr(obj, e);
+	if (IS_ERR(cr)) {
+		clk_disable(obj->clk);
+		return PTR_ERR(cr);
+	}
+
+	iotlb_load_cr(obj, cr);
+	kfree(cr);
+
+	/* increment victim for next tlb load */
+	if (++l.vict == obj->nr_tlb_entries)
+		l.vict = 0;
+	iotlb_lock_set(obj, &l);
+out:
+	clk_disable(obj->clk);
+	return err;
+}
+EXPORT_SYMBOL_GPL(load_iotlb_entry);
+
+/**
+ * flush_iotlb_page - Clear an iommu tlb entry
+ * @obj:	target iommu
+ * @da:		iommu device virtual address
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_page(struct iommu *obj, u32 da)
+{
+	struct iotlb_lock l;
+	int i;
+
+	clk_enable(obj->clk);
+
+	for (i = 0; i < obj->nr_tlb_entries; i++) {
+		struct cr_regs cr;
+		u32 start;
+		size_t bytes;
+
+		iotlb_lock_get(obj, &l);
+		l.vict = i;
+		iotlb_lock_set(obj, &l);
+		iotlb_read_cr(obj, &cr);
+		if (!iotlb_cr_valid(&cr))
+			continue;
+
+		start = iotlb_cr_to_virt(&cr);
+		bytes = iopgsz_to_bytes(cr.cam & 3);
+
+		if ((start <= da) && (da < start + bytes)) {
+			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
+				__func__, start, da, bytes);
+
+			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+		}
+	}
+	clk_disable(obj->clk);
+
+	if (i == obj->nr_tlb_entries)
+		dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_page);
+
+/**
+ * flush_iotlb_range - Clear an iommu tlb entries
+ * @obj:	target iommu
+ * @start:	iommu device virtual address(start)
+ * @end:	iommu device virtual address(end)
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_range(struct iommu *obj, u32 start, u32 end)
+{
+	u32 da = start;
+
+	while (da < end) {
+		flush_iotlb_page(obj, da);
+		/* FIXME: Optimize for multiple page size */
+		da += IOPTE_SIZE;
+	}
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_range);
+
+/**
+ * flush_iotlb_all - Clear all iommu tlb entries
+ * @obj:	target iommu
+ **/
+void flush_iotlb_all(struct iommu *obj)
+{
+	struct iotlb_lock l;
+
+	clk_enable(obj->clk);
+
+	l.base = 0;
+	l.vict = 0;
+	iotlb_lock_set(obj, &l);
+
+	iommu_write_reg(obj, 1, MMU_GFLUSH);
+
+	clk_disable(obj->clk);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_all);
+
+#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
+
+ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+	ssize_t bytes;
+
+	if (!obj || !buf)
+		return -EINVAL;
+
+	clk_enable(obj->clk);
+
+	bytes = arch_iommu->dump_ctx(obj, buf);
+
+	clk_disable(obj->clk);
+
+	return bytes;
+}
+EXPORT_SYMBOL_GPL(iommu_dump_ctx);
+
+static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
+{
+	int i;
+	struct iotlb_lock saved, l;
+	struct cr_regs *p = crs;
+
+	clk_enable(obj->clk);
+
+	iotlb_lock_get(obj, &saved);
+	memcpy(&l, &saved, sizeof(saved));
+
+	for (i = 0; i < obj->nr_tlb_entries; i++) {
+		struct cr_regs tmp;
+
+		iotlb_lock_get(obj, &l);
+		l.vict = i;
+		iotlb_lock_set(obj, &l);
+		iotlb_read_cr(obj, &tmp);
+		if (!iotlb_cr_valid(&tmp))
+			continue;
+
+		*p++ = tmp;
+	}
+	iotlb_lock_set(obj, &saved);
+	clk_disable(obj->clk);
+
+	return  p - crs;
+}
+
+/**
+ * dump_tlb_entries - dump cr arrays to given buffer
+ * @obj:	target iommu
+ * @buf:	output buffer
+ **/
+size_t dump_tlb_entries(struct iommu *obj, char *buf)
+{
+	int i, n;
+	struct cr_regs *cr;
+	char *p = buf;
+
+	cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
+	if (!cr)
+		return 0;
+
+	n = __dump_tlb_entries(obj, cr);
+	for (i = 0; i < n; i++)
+		p += iotlb_dump_cr(obj, cr + i, p);
+	kfree(cr);
+
+	return p - buf;
+}
+EXPORT_SYMBOL_GPL(dump_tlb_entries);
+
+int foreach_iommu_device(void *data, int (*fn)(struct device *, void *))
+{
+	return driver_for_each_device(&omap_iommu_driver.driver,
+				      NULL, data, fn);
+}
+EXPORT_SYMBOL_GPL(foreach_iommu_device);
+
+#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */
+
+/*
+ *	H/W pagetable operations
+ */
+static void flush_iopgd_range(u32 *first, u32 *last)
+{
+	/* FIXME: L2 cache should be taken care of if it exists */
+	do {
+		asm("mcr	p15, 0, %0, c7, c10, 1 @ flush_pgd"
+		    : : "r" (first));
+		first += L1_CACHE_BYTES / sizeof(*first);
+	} while (first <= last);
+}
+
+static void flush_iopte_range(u32 *first, u32 *last)
+{
+	/* FIXME: L2 cache should be taken care of if it exists */
+	do {
+		asm("mcr	p15, 0, %0, c7, c10, 1 @ flush_pte"
+		    : : "r" (first));
+		first += L1_CACHE_BYTES / sizeof(*first);
+	} while (first <= last);
+}
+
+static void iopte_free(u32 *iopte)
+{
+	/* Note: freed iopte's must be clean ready for re-use */
+	kmem_cache_free(iopte_cachep, iopte);
+}
+
+static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da)
+{
+	u32 *iopte;
+
+	/* a table has already existed */
+	if (*iopgd)
+		goto pte_ready;
+
+	/*
+	 * do the allocation outside the page table lock
+	 */
+	spin_unlock(&obj->page_table_lock);
+	iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL);
+	spin_lock(&obj->page_table_lock);
+
+	if (!*iopgd) {
+		if (!iopte)
+			return ERR_PTR(-ENOMEM);
+
+		*iopgd = virt_to_phys(iopte) | IOPGD_TABLE;
+		flush_iopgd_range(iopgd, iopgd);
+
+		dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte);
+	} else {
+		/* We raced, free the reduniovant table */
+		iopte_free(iopte);
+	}
+
+pte_ready:
+	iopte = iopte_offset(iopgd, da);
+
+	dev_vdbg(obj->dev,
+		 "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+		 __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+	return iopte;
+}
+
+static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+
+	*iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
+	flush_iopgd_range(iopgd, iopgd);
+	return 0;
+}
+
+static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+	int i;
+
+	for (i = 0; i < 16; i++)
+		*(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
+	flush_iopgd_range(iopgd, iopgd + 15);
+	return 0;
+}
+
+static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+	u32 *iopte = iopte_alloc(obj, iopgd, da);
+
+	if (IS_ERR(iopte))
+		return PTR_ERR(iopte);
+
+	*iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL;
+	flush_iopte_range(iopte, iopte);
+
+	dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n",
+		 __func__, da, pa, iopte, *iopte);
+
+	return 0;
+}
+
+static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+	u32 *iopte = iopte_alloc(obj, iopgd, da);
+	int i;
+
+	if (IS_ERR(iopte))
+		return PTR_ERR(iopte);
+
+	for (i = 0; i < 16; i++)
+		*(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE;
+	flush_iopte_range(iopte, iopte + 15);
+	return 0;
+}
+
+static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e)
+{
+	int (*fn)(struct iommu *, u32, u32, u32);
+	u32 prot;
+	int err;
+
+	if (!obj || !e)
+		return -EINVAL;
+
+	switch (e->pgsz) {
+	case MMU_CAM_PGSZ_16M:
+		fn = iopgd_alloc_super;
+		break;
+	case MMU_CAM_PGSZ_1M:
+		fn = iopgd_alloc_section;
+		break;
+	case MMU_CAM_PGSZ_64K:
+		fn = iopte_alloc_large;
+		break;
+	case MMU_CAM_PGSZ_4K:
+		fn = iopte_alloc_page;
+		break;
+	default:
+		fn = NULL;
+		BUG();
+		break;
+	}
+
+	prot = get_iopte_attr(e);
+
+	spin_lock(&obj->page_table_lock);
+	err = fn(obj, e->da, e->pa, prot);
+	spin_unlock(&obj->page_table_lock);
+
+	return err;
+}
+
+/**
+ * iopgtable_store_entry - Make an iommu pte entry
+ * @obj:	target iommu
+ * @e:		an iommu tlb entry info
+ **/
+int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+	int err;
+
+	flush_iotlb_page(obj, e->da);
+	err = iopgtable_store_entry_core(obj, e);
+#ifdef PREFETCH_IOTLB
+	if (!err)
+		load_iotlb_entry(obj, e);
+#endif
+	return err;
+}
+EXPORT_SYMBOL_GPL(iopgtable_store_entry);
+
+/**
+ * iopgtable_lookup_entry - Lookup an iommu pte entry
+ * @obj:	target iommu
+ * @da:		iommu device virtual address
+ * @ppgd:	iommu pgd entry pointer to be returned
+ * @ppte:	iommu pte entry pointer to be returned
+ **/
+void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte)
+{
+	u32 *iopgd, *iopte = NULL;
+
+	iopgd = iopgd_offset(obj, da);
+	if (!*iopgd)
+		goto out;
+
+	if (*iopgd & IOPGD_TABLE)
+		iopte = iopte_offset(iopgd, da);
+out:
+	*ppgd = iopgd;
+	*ppte = iopte;
+}
+EXPORT_SYMBOL_GPL(iopgtable_lookup_entry);
+
+static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
+{
+	size_t bytes;
+	u32 *iopgd = iopgd_offset(obj, da);
+	int nent = 1;
+
+	if (!*iopgd)
+		return 0;
+
+	if (*iopgd & IOPGD_TABLE) {
+		int i;
+		u32 *iopte = iopte_offset(iopgd, da);
+
+		bytes = IOPTE_SIZE;
+		if (*iopte & IOPTE_LARGE) {
+			nent *= 16;
+			/* rewind to the 1st entry */
+			iopte = (u32 *)((u32)iopte & IOLARGE_MASK);
+		}
+		bytes *= nent;
+		memset(iopte, 0, nent * sizeof(*iopte));
+		flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte));
+
+		/*
+		 * do table walk to check if this table is necessary or not
+		 */
+		iopte = iopte_offset(iopgd, 0);
+		for (i = 0; i < PTRS_PER_IOPTE; i++)
+			if (iopte[i])
+				goto out;
+
+		iopte_free(iopte);
+		nent = 1; /* for the next L1 entry */
+	} else {
+		bytes = IOPGD_SIZE;
+		if (*iopgd & IOPGD_SUPER) {
+			nent *= 16;
+			/* rewind to the 1st entry */
+			iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
+		}
+		bytes *= nent;
+	}
+	memset(iopgd, 0, nent * sizeof(*iopgd));
+	flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd));
+out:
+	return bytes;
+}
+
+/**
+ * iopgtable_clear_entry - Remove an iommu pte entry
+ * @obj:	target iommu
+ * @da:		iommu device virtual address
+ **/
+size_t iopgtable_clear_entry(struct iommu *obj, u32 da)
+{
+	size_t bytes;
+
+	spin_lock(&obj->page_table_lock);
+
+	bytes = iopgtable_clear_entry_core(obj, da);
+	flush_iotlb_page(obj, da);
+
+	spin_unlock(&obj->page_table_lock);
+
+	return bytes;
+}
+EXPORT_SYMBOL_GPL(iopgtable_clear_entry);
+
+static void iopgtable_clear_entry_all(struct iommu *obj)
+{
+	int i;
+
+	spin_lock(&obj->page_table_lock);
+
+	for (i = 0; i < PTRS_PER_IOPGD; i++) {
+		u32 da;
+		u32 *iopgd;
+
+		da = i << IOPGD_SHIFT;
+		iopgd = iopgd_offset(obj, da);
+
+		if (!*iopgd)
+			continue;
+
+		if (*iopgd & IOPGD_TABLE)
+			iopte_free(iopte_offset(iopgd, 0));
+
+		*iopgd = 0;
+		flush_iopgd_range(iopgd, iopgd);
+	}
+
+	flush_iotlb_all(obj);
+
+	spin_unlock(&obj->page_table_lock);
+}
+
+/*
+ *	Device IOMMU generic operations
+ */
+static irqreturn_t iommu_fault_handler(int irq, void *data)
+{
+	u32 stat, da;
+	u32 *iopgd, *iopte;
+	int err = -EIO;
+	struct iommu *obj = data;
+
+	if (!obj->refcount)
+		return IRQ_NONE;
+
+	/* Dynamic loading TLB or PTE */
+	if (obj->isr)
+		err = obj->isr(obj);
+
+	if (!err)
+		return IRQ_HANDLED;
+
+	clk_enable(obj->clk);
+	stat = iommu_report_fault(obj, &da);
+	clk_disable(obj->clk);
+	if (!stat)
+		return IRQ_HANDLED;
+
+	iopgd = iopgd_offset(obj, da);
+
+	if (!(*iopgd & IOPGD_TABLE)) {
+		dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__,
+			da, iopgd, *iopgd);
+		return IRQ_NONE;
+	}
+
+	iopte = iopte_offset(iopgd, da);
+
+	dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+		__func__, da, iopgd, *iopgd, iopte, *iopte);
+
+	return IRQ_NONE;
+}
+
+static int device_match_by_alias(struct device *dev, void *data)
+{
+	struct iommu *obj = to_iommu(dev);
+	const char *name = data;
+
+	pr_debug("%s: %s %s\n", __func__, obj->name, name);
+
+	return strcmp(obj->name, name) == 0;
+}
+
+/**
+ * iommu_get - Get iommu handler
+ * @name:	target iommu name
+ **/
+struct iommu *iommu_get(const char *name)
+{
+	int err = -ENOMEM;
+	struct device *dev;
+	struct iommu *obj;
+
+	dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name,
+				 device_match_by_alias);
+	if (!dev)
+		return ERR_PTR(-ENODEV);
+
+	obj = to_iommu(dev);
+
+	mutex_lock(&obj->iommu_lock);
+
+	if (obj->refcount++ == 0) {
+		err = iommu_enable(obj);
+		if (err)
+			goto err_enable;
+		flush_iotlb_all(obj);
+	}
+
+	if (!try_module_get(obj->owner))
+		goto err_module;
+
+	mutex_unlock(&obj->iommu_lock);
+
+	dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+	return obj;
+
+err_module:
+	if (obj->refcount == 1)
+		iommu_disable(obj);
+err_enable:
+	obj->refcount--;
+	mutex_unlock(&obj->iommu_lock);
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(iommu_get);
+
+/**
+ * iommu_put - Put back iommu handler
+ * @obj:	target iommu
+ **/
+void iommu_put(struct iommu *obj)
+{
+	if (!obj && IS_ERR(obj))
+		return;
+
+	mutex_lock(&obj->iommu_lock);
+
+	if (--obj->refcount == 0)
+		iommu_disable(obj);
+
+	module_put(obj->owner);
+
+	mutex_unlock(&obj->iommu_lock);
+
+	dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+}
+EXPORT_SYMBOL_GPL(iommu_put);
+
+/*
+ *	OMAP Device MMU(IOMMU) detection
+ */
+static int __devinit omap_iommu_probe(struct platform_device *pdev)
+{
+	int err = -ENODEV;
+	void *p;
+	int irq;
+	struct iommu *obj;
+	struct resource *res;
+	struct iommu_platform_data *pdata = pdev->dev.platform_data;
+
+	if (pdev->num_resources != 2)
+		return -EINVAL;
+
+	obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
+	if (!obj)
+		return -ENOMEM;
+
+	obj->clk = clk_get(&pdev->dev, pdata->clk_name);
+	if (IS_ERR(obj->clk))
+		goto err_clk;
+
+	obj->nr_tlb_entries = pdata->nr_tlb_entries;
+	obj->name = pdata->name;
+	obj->dev = &pdev->dev;
+	obj->ctx = (void *)obj + sizeof(*obj);
+
+	mutex_init(&obj->iommu_lock);
+	mutex_init(&obj->mmap_lock);
+	spin_lock_init(&obj->page_table_lock);
+	INIT_LIST_HEAD(&obj->mmap);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENODEV;
+		goto err_mem;
+	}
+	obj->regbase = ioremap(res->start, resource_size(res));
+	if (!obj->regbase) {
+		err = -ENOMEM;
+		goto err_mem;
+	}
+
+	res = request_mem_region(res->start, resource_size(res),
+				 dev_name(&pdev->dev));
+	if (!res) {
+		err = -EIO;
+		goto err_mem;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		err = -ENODEV;
+		goto err_irq;
+	}
+	err = request_irq(irq, iommu_fault_handler, IRQF_SHARED,
+			  dev_name(&pdev->dev), obj);
+	if (err < 0)
+		goto err_irq;
+	platform_set_drvdata(pdev, obj);
+
+	p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE));
+	if (!p) {
+		err = -ENOMEM;
+		goto err_pgd;
+	}
+	memset(p, 0, IOPGD_TABLE_SIZE);
+	clean_dcache_area(p, IOPGD_TABLE_SIZE);
+	obj->iopgd = p;
+
+	BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE));
+
+	dev_info(&pdev->dev, "%s registered\n", obj->name);
+	return 0;
+
+err_pgd:
+	free_irq(irq, obj);
+err_irq:
+	release_mem_region(res->start, resource_size(res));
+	iounmap(obj->regbase);
+err_mem:
+	clk_put(obj->clk);
+err_clk:
+	kfree(obj);
+	return err;
+}
+
+static int __devexit omap_iommu_remove(struct platform_device *pdev)
+{
+	int irq;
+	struct resource *res;
+	struct iommu *obj = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	iopgtable_clear_entry_all(obj);
+	free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE));
+
+	irq = platform_get_irq(pdev, 0);
+	free_irq(irq, obj);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+	iounmap(obj->regbase);
+
+	clk_put(obj->clk);
+	dev_info(&pdev->dev, "%s removed\n", obj->name);
+	kfree(obj);
+	return 0;
+}
+
+static struct platform_driver omap_iommu_driver = {
+	.probe	= omap_iommu_probe,
+	.remove	= __devexit_p(omap_iommu_remove),
+	.driver	= {
+		.name	= "omap-iommu",
+	},
+};
+
+static void iopte_cachep_ctor(void *iopte)
+{
+	clean_dcache_area(iopte, IOPTE_TABLE_SIZE);
+}
+
+static int __init omap_iommu_init(void)
+{
+	struct kmem_cache *p;
+	const unsigned long flags = SLAB_HWCACHE_ALIGN;
+	size_t align = 1 << 10; /* L2 pagetable alignement */
+
+	p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags,
+			      iopte_cachep_ctor);
+	if (!p)
+		return -ENOMEM;
+	iopte_cachep = p;
+
+	return platform_driver_register(&omap_iommu_driver);
+}
+module_init(omap_iommu_init);
+
+static void __exit omap_iommu_exit(void)
+{
+	kmem_cache_destroy(iopte_cachep);
+
+	platform_driver_unregister(&omap_iommu_driver);
+}
+module_exit(omap_iommu_exit);
+
+MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives");
+MODULE_ALIAS("platform:omap-iommu");
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h
new file mode 100644
index 00000000000..37dac434c7a
--- /dev/null
+++ b/arch/arm/plat-omap/iopgtable.h
@@ -0,0 +1,72 @@
+/*
+ * omap iommu: pagetable definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_OMAP_IOMMU_H
+#define __PLAT_OMAP_IOMMU_H
+
+#define IOPGD_SHIFT		20
+#define IOPGD_SIZE		(1 << IOPGD_SHIFT)
+#define IOPGD_MASK		(~(IOPGD_SIZE - 1))
+#define IOSECTION_MASK		IOPGD_MASK
+#define PTRS_PER_IOPGD		(1 << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE	(PTRS_PER_IOPGD * sizeof(u32))
+
+#define IOSUPER_SIZE		(IOPGD_SIZE << 4)
+#define IOSUPER_MASK		(~(IOSUPER_SIZE - 1))
+
+#define IOPTE_SHIFT		12
+#define IOPTE_SIZE		(1 << IOPTE_SHIFT)
+#define IOPTE_MASK		(~(IOPTE_SIZE - 1))
+#define IOPAGE_MASK		IOPTE_MASK
+#define PTRS_PER_IOPTE		(1 << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE	(PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOLARGE_SIZE		(IOPTE_SIZE << 4)
+#define IOLARGE_MASK		(~(IOLARGE_SIZE - 1))
+
+#define IOPGD_TABLE		(1 << 0)
+#define IOPGD_SECTION		(2 << 0)
+#define IOPGD_SUPER		(1 << 18 | 2 << 0)
+
+#define IOPTE_SMALL		(2 << 0)
+#define IOPTE_LARGE		(1 << 0)
+
+#define iopgd_index(da)		(((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
+#define iopgd_offset(obj, da)	((obj)->iopgd + iopgd_index(da))
+
+#define iopte_paddr(iopgd)	(*iopgd & ~((1 << 10) - 1))
+#define iopte_vaddr(iopgd)	((u32 *)phys_to_virt(iopte_paddr(iopgd)))
+
+#define iopte_index(da)		(((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
+#define iopte_offset(iopgd, da)	(iopte_vaddr(iopgd) + iopte_index(da))
+
+static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
+				   u32 flags)
+{
+	memset(e, 0, sizeof(*e));
+
+	e->da		= da;
+	e->pa		= pa;
+	e->valid	= 1;
+	/* FIXME: add OMAP1 support */
+	e->pgsz		= flags & MMU_CAM_PGSZ_MASK;
+	e->endian	= flags & MMU_RAM_ENDIAN_MASK;
+	e->elsz		= flags & MMU_RAM_ELSZ_MASK;
+	e->mixed	= flags & MMU_RAM_MIXED_MASK;
+
+	return iopgsz_to_bytes(e->pgsz);
+}
+
+#define to_iommu(dev)							\
+	(struct iommu *)platform_get_drvdata(to_platform_device(dev))
+
+#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
new file mode 100644
index 00000000000..2fce2c151a9
--- /dev/null
+++ b/arch/arm/plat-omap/iovmm.c
@@ -0,0 +1,896 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/vmalloc.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+#include <mach/iommu.h>
+#include <mach/iovmm.h>
+
+#include "iopgtable.h"
+
+/*
+ * A device driver needs to create address mappings between:
+ *
+ * - iommu/device address
+ * - physical address
+ * - mpu virtual address
+ *
+ * There are 4 possible patterns for them:
+ *
+ *    |iova/			  mapping		iommu_		page
+ *    | da	pa	va	(d)-(p)-(v)		function	type
+ *  ---------------------------------------------------------------------------
+ *  1 | c	c	c	 1 - 1 - 1	  _kmap() / _kunmap()	s
+ *  2 | c	c,a	c	 1 - 1 - 1	_kmalloc()/ _kfree()	s
+ *  3 | c	d	c	 1 - n - 1	  _vmap() / _vunmap()	s
+ *  4 | c	d,a	c	 1 - n - 1	_vmalloc()/ _vfree()	n*
+ *
+ *
+ *	'iova':	device iommu virtual address
+ *	'da':	alias of 'iova'
+ *	'pa':	physical address
+ *	'va':	mpu virtual address
+ *
+ *	'c':	contiguous memory area
+ *	'd':	dicontiguous memory area
+ *	'a':	anonymous memory allocation
+ *	'()':	optional feature
+ *
+ *	'n':	a normal page(4KB) size is used.
+ *	's':	multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used.
+ *
+ *	'*':	not yet, but feasible.
+ */
+
+static struct kmem_cache *iovm_area_cachep;
+
+/* return total bytes of sg buffers */
+static size_t sgtable_len(const struct sg_table *sgt)
+{
+	unsigned int i, total = 0;
+	struct scatterlist *sg;
+
+	if (!sgt)
+		return 0;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes;
+
+		bytes = sg_dma_len(sg);
+
+		if (!iopgsz_ok(bytes)) {
+			pr_err("%s: sg[%d] not iommu pagesize(%x)\n",
+			       __func__, i, bytes);
+			return 0;
+		}
+
+		total += bytes;
+	}
+
+	return total;
+}
+#define sgtable_ok(x)	(!!sgtable_len(x))
+
+/*
+ * calculate the optimal number sg elements from total bytes based on
+ * iommu superpages
+ */
+static unsigned int sgtable_nents(size_t bytes)
+{
+	int i;
+	unsigned int nr_entries;
+	const unsigned long pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, };
+
+	if (!IS_ALIGNED(bytes, PAGE_SIZE)) {
+		pr_err("%s: wrong size %08x\n", __func__, bytes);
+		return 0;
+	}
+
+	nr_entries = 0;
+	for (i = 0; i < ARRAY_SIZE(pagesize); i++) {
+		if (bytes >= pagesize[i]) {
+			nr_entries += (bytes / pagesize[i]);
+			bytes %= pagesize[i];
+		}
+	}
+	BUG_ON(bytes);
+
+	return nr_entries;
+}
+
+/* allocate and initialize sg_table header(a kind of 'superblock') */
+static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
+{
+	unsigned int nr_entries;
+	int err;
+	struct sg_table *sgt;
+
+	if (!bytes)
+		return ERR_PTR(-EINVAL);
+
+	if (!IS_ALIGNED(bytes, PAGE_SIZE))
+		return ERR_PTR(-EINVAL);
+
+	/* FIXME: IOVMF_DA_FIXED should support 'superpages' */
+	if ((flags & IOVMF_LINEAR) && (flags & IOVMF_DA_ANON)) {
+		nr_entries = sgtable_nents(bytes);
+		if (!nr_entries)
+			return ERR_PTR(-EINVAL);
+	} else
+		nr_entries =  bytes / PAGE_SIZE;
+
+	sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
+	if (!sgt)
+		return ERR_PTR(-ENOMEM);
+
+	err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
+	if (err)
+		return ERR_PTR(err);
+
+	pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
+
+	return sgt;
+}
+
+/* free sg_table header(a kind of superblock) */
+static void sgtable_free(struct sg_table *sgt)
+{
+	if (!sgt)
+		return;
+
+	sg_free_table(sgt);
+	kfree(sgt);
+
+	pr_debug("%s: sgt:%p\n", __func__, sgt);
+}
+
+/* map 'sglist' to a contiguous mpu virtual area and return 'va' */
+static void *vmap_sg(const struct sg_table *sgt)
+{
+	u32 va;
+	size_t total;
+	unsigned int i;
+	struct scatterlist *sg;
+	struct vm_struct *new;
+	const struct mem_type *mtype;
+
+	mtype = get_mem_type(MT_DEVICE);
+	if (!mtype)
+		return ERR_PTR(-EINVAL);
+
+	total = sgtable_len(sgt);
+	if (!total)
+		return ERR_PTR(-EINVAL);
+
+	new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END);
+	if (!new)
+		return ERR_PTR(-ENOMEM);
+	va = (u32)new->addr;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes;
+		u32 pa;
+		int err;
+
+		pa = sg_phys(sg);
+		bytes = sg_dma_len(sg);
+
+		BUG_ON(bytes != PAGE_SIZE);
+
+		err = ioremap_page(va,  pa, mtype);
+		if (err)
+			goto err_out;
+
+		va += bytes;
+	}
+
+	flush_cache_vmap(new->addr, total);
+	return new->addr;
+
+err_out:
+	WARN_ON(1); /* FIXME: cleanup some mpu mappings */
+	vunmap(new->addr);
+	return ERR_PTR(-EAGAIN);
+}
+
+static inline void vunmap_sg(const void *va)
+{
+	vunmap(va);
+}
+
+static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da)
+{
+	struct iovm_struct *tmp;
+
+	list_for_each_entry(tmp, &obj->mmap, list) {
+		if ((da >= tmp->da_start) && (da < tmp->da_end)) {
+			size_t len;
+
+			len = tmp->da_end - tmp->da_start;
+
+			dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n",
+				__func__, tmp->da_start, da, tmp->da_end, len,
+				tmp->flags);
+
+			return tmp;
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * find_iovm_area  -  find iovma which includes @da
+ * @da:		iommu device virtual address
+ *
+ * Find the existing iovma starting at @da
+ */
+struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da)
+{
+	struct iovm_struct *area;
+
+	mutex_lock(&obj->mmap_lock);
+	area = __find_iovm_area(obj, da);
+	mutex_unlock(&obj->mmap_lock);
+
+	return area;
+}
+EXPORT_SYMBOL_GPL(find_iovm_area);
+
+/*
+ * This finds the hole(area) which fits the requested address and len
+ * in iovmas mmap, and returns the new allocated iovma.
+ */
+static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
+					   size_t bytes, u32 flags)
+{
+	struct iovm_struct *new, *tmp;
+	u32 start, prev_end, alignement;
+
+	if (!obj || !bytes)
+		return ERR_PTR(-EINVAL);
+
+	start = da;
+	alignement = PAGE_SIZE;
+
+	if (flags & IOVMF_DA_ANON) {
+		/*
+		 * Reserve the first page for NULL
+		 */
+		start = PAGE_SIZE;
+		if (flags & IOVMF_LINEAR)
+			alignement = iopgsz_max(bytes);
+		start = roundup(start, alignement);
+	}
+
+	tmp = NULL;
+	if (list_empty(&obj->mmap))
+		goto found;
+
+	prev_end = 0;
+	list_for_each_entry(tmp, &obj->mmap, list) {
+
+		if ((prev_end <= start) && (start + bytes < tmp->da_start))
+			goto found;
+
+		if (flags & IOVMF_DA_ANON)
+			start = roundup(tmp->da_end, alignement);
+
+		prev_end = tmp->da_end;
+	}
+
+	if ((start >= prev_end) && (ULONG_MAX - start >= bytes))
+		goto found;
+
+	dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
+		__func__, da, bytes, flags);
+
+	return ERR_PTR(-EINVAL);
+
+found:
+	new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL);
+	if (!new)
+		return ERR_PTR(-ENOMEM);
+
+	new->iommu = obj;
+	new->da_start = start;
+	new->da_end = start + bytes;
+	new->flags = flags;
+
+	/*
+	 * keep ascending order of iovmas
+	 */
+	if (tmp)
+		list_add_tail(&new->list, &tmp->list);
+	else
+		list_add(&new->list, &obj->mmap);
+
+	dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n",
+		__func__, new->da_start, start, new->da_end, bytes, flags);
+
+	return new;
+}
+
+static void free_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+	size_t bytes;
+
+	BUG_ON(!obj || !area);
+
+	bytes = area->da_end - area->da_start;
+
+	dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n",
+		__func__, area->da_start, area->da_end, bytes, area->flags);
+
+	list_del(&area->list);
+	kmem_cache_free(iovm_area_cachep, area);
+}
+
+/**
+ * da_to_va - convert (d) to (v)
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ * @va:		mpu virtual address
+ *
+ * Returns mpu virtual addr which corresponds to a given device virtual addr
+ */
+void *da_to_va(struct iommu *obj, u32 da)
+{
+	void *va = NULL;
+	struct iovm_struct *area;
+
+	mutex_lock(&obj->mmap_lock);
+
+	area = __find_iovm_area(obj, da);
+	if (!area) {
+		dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+		goto out;
+	}
+	va = area->va;
+	mutex_unlock(&obj->mmap_lock);
+out:
+	return va;
+}
+EXPORT_SYMBOL_GPL(da_to_va);
+
+static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
+{
+	unsigned int i;
+	struct scatterlist *sg;
+	void *va = _va;
+	void *va_end;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		struct page *pg;
+		const size_t bytes = PAGE_SIZE;
+
+		/*
+		 * iommu 'superpage' isn't supported with 'iommu_vmalloc()'
+		 */
+		pg = vmalloc_to_page(va);
+		BUG_ON(!pg);
+		sg_set_page(sg, pg, bytes, 0);
+
+		va += bytes;
+	}
+
+	va_end = _va + PAGE_SIZE * i;
+	flush_cache_vmap(_va, va_end);
+}
+
+static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
+{
+	/*
+	 * Actually this is not necessary at all, just exists for
+	 * consistency of the code readibility.
+	 */
+	BUG_ON(!sgt);
+}
+
+static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
+{
+	unsigned int i;
+	struct scatterlist *sg;
+	void *va;
+
+	va = phys_to_virt(pa);
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes;
+
+		bytes = iopgsz_max(len);
+
+		BUG_ON(!iopgsz_ok(bytes));
+
+		sg_set_buf(sg, phys_to_virt(pa), bytes);
+		/*
+		 * 'pa' is cotinuous(linear).
+		 */
+		pa += bytes;
+		len -= bytes;
+	}
+	BUG_ON(len);
+
+	clean_dcache_area(va, len);
+}
+
+static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
+{
+	/*
+	 * Actually this is not necessary at all, just exists for
+	 * consistency of the code readibility
+	 */
+	BUG_ON(!sgt);
+}
+
+/* create 'da' <-> 'pa' mapping from 'sgt' */
+static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
+			 const struct sg_table *sgt, u32 flags)
+{
+	int err;
+	unsigned int i, j;
+	struct scatterlist *sg;
+	u32 da = new->da_start;
+
+	if (!obj || !new || !sgt)
+		return -EINVAL;
+
+	BUG_ON(!sgtable_ok(sgt));
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		u32 pa;
+		int pgsz;
+		size_t bytes;
+		struct iotlb_entry e;
+
+		pa = sg_phys(sg);
+		bytes = sg_dma_len(sg);
+
+		flags &= ~IOVMF_PGSZ_MASK;
+		pgsz = bytes_to_iopgsz(bytes);
+		if (pgsz < 0)
+			goto err_out;
+		flags |= pgsz;
+
+		pr_debug("%s: [%d] %08x %08x(%x)\n", __func__,
+			 i, da, pa, bytes);
+
+		iotlb_init_entry(&e, da, pa, flags);
+		err = iopgtable_store_entry(obj, &e);
+		if (err)
+			goto err_out;
+
+		da += bytes;
+	}
+	return 0;
+
+err_out:
+	da = new->da_start;
+
+	for_each_sg(sgt->sgl, sg, i, j) {
+		size_t bytes;
+
+		bytes = iopgtable_clear_entry(obj, da);
+
+		BUG_ON(!iopgsz_ok(bytes));
+
+		da += bytes;
+	}
+	return err;
+}
+
+/* release 'da' <-> 'pa' mapping */
+static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+	u32 start;
+	size_t total = area->da_end - area->da_start;
+
+	BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE));
+
+	start = area->da_start;
+	while (total > 0) {
+		size_t bytes;
+
+		bytes = iopgtable_clear_entry(obj, start);
+		if (bytes == 0)
+			bytes = PAGE_SIZE;
+		else
+			dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n",
+				__func__, start, bytes, area->flags);
+
+		BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE));
+
+		total -= bytes;
+		start += bytes;
+	}
+	BUG_ON(total);
+}
+
+/* template function for all unmapping */
+static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da,
+				      void (*fn)(const void *), u32 flags)
+{
+	struct sg_table *sgt = NULL;
+	struct iovm_struct *area;
+
+	if (!IS_ALIGNED(da, PAGE_SIZE)) {
+		dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da);
+		return NULL;
+	}
+
+	mutex_lock(&obj->mmap_lock);
+
+	area = __find_iovm_area(obj, da);
+	if (!area) {
+		dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+		goto out;
+	}
+
+	if ((area->flags & flags) != flags) {
+		dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__,
+			area->flags);
+		goto out;
+	}
+	sgt = (struct sg_table *)area->sgt;
+
+	unmap_iovm_area(obj, area);
+
+	fn(area->va);
+
+	dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__,
+		area->da_start, da, area->da_end,
+		area->da_end - area->da_start, area->flags);
+
+	free_iovm_area(obj, area);
+out:
+	mutex_unlock(&obj->mmap_lock);
+
+	return sgt;
+}
+
+static u32 map_iommu_region(struct iommu *obj, u32 da,
+	      const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+	int err = -ENOMEM;
+	struct iovm_struct *new;
+
+	mutex_lock(&obj->mmap_lock);
+
+	new = alloc_iovm_area(obj, da, bytes, flags);
+	if (IS_ERR(new)) {
+		err = PTR_ERR(new);
+		goto err_alloc_iovma;
+	}
+	new->va = va;
+	new->sgt = sgt;
+
+	if (map_iovm_area(obj, new, sgt, new->flags))
+		goto err_map;
+
+	mutex_unlock(&obj->mmap_lock);
+
+	dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n",
+		__func__, new->da_start, bytes, new->flags, va);
+
+	return new->da_start;
+
+err_map:
+	free_iovm_area(obj, new);
+err_alloc_iovma:
+	mutex_unlock(&obj->mmap_lock);
+	return err;
+}
+
+static inline u32 __iommu_vmap(struct iommu *obj, u32 da,
+		 const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+	return map_iommu_region(obj, da, sgt, va, bytes, flags);
+}
+
+/**
+ * iommu_vmap  -  (d)-(p)-(v) address mapper
+ * @obj:	objective iommu
+ * @sgt:	address of scatter gather table
+ * @flags:	iovma and page property
+ *
+ * Creates 1-n-1 mapping with given @sgt and returns @da.
+ * All @sgt element must be io page size aligned.
+ */
+u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
+		 u32 flags)
+{
+	size_t bytes;
+	void *va;
+
+	if (!obj || !obj->dev || !sgt)
+		return -EINVAL;
+
+	bytes = sgtable_len(sgt);
+	if (!bytes)
+		return -EINVAL;
+	bytes = PAGE_ALIGN(bytes);
+
+	va = vmap_sg(sgt);
+	if (IS_ERR(va))
+		return PTR_ERR(va);
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_DISCONT;
+	flags |= IOVMF_MMIO;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		vunmap_sg(va);
+
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmap);
+
+/**
+ * iommu_vunmap  -  release virtual mapping obtained by 'iommu_vmap()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Free the iommu virtually contiguous memory area starting at
+ * @da, which was returned by 'iommu_vmap()'.
+ */
+struct sg_table *iommu_vunmap(struct iommu *obj, u32 da)
+{
+	struct sg_table *sgt;
+	/*
+	 * 'sgt' is allocated before 'iommu_vmalloc()' is called.
+	 * Just returns 'sgt' to the caller to free
+	 */
+	sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	return sgt;
+}
+EXPORT_SYMBOL_GPL(iommu_vunmap);
+
+/**
+ * iommu_vmalloc  -  (d)-(p)-(v) address allocator and mapper
+ * @obj:	objective iommu
+ * @da:		contiguous iommu virtual memory
+ * @bytes:	allocation size
+ * @flags:	iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-n-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+	void *va;
+	struct sg_table *sgt;
+
+	if (!obj || !obj->dev || !bytes)
+		return -EINVAL;
+
+	bytes = PAGE_ALIGN(bytes);
+
+	va = vmalloc(bytes);
+	if (!va)
+		return -ENOMEM;
+
+	sgt = sgtable_alloc(bytes, flags);
+	if (IS_ERR(sgt)) {
+		da = PTR_ERR(sgt);
+		goto err_sgt_alloc;
+	}
+	sgtable_fill_vmalloc(sgt, va);
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_DISCONT;
+	flags |= IOVMF_ALLOC;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		goto err_iommu_vmap;
+
+	return da;
+
+err_iommu_vmap:
+	sgtable_drain_vmalloc(sgt);
+	sgtable_free(sgt);
+err_sgt_alloc:
+	vfree(va);
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmalloc);
+
+/**
+ * iommu_vfree  -  release memory allocated by 'iommu_vmalloc()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Frees the iommu virtually continuous memory area starting at
+ * @da, as obtained from 'iommu_vmalloc()'.
+ */
+void iommu_vfree(struct iommu *obj, const u32 da)
+{
+	struct sg_table *sgt;
+
+	sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_vfree);
+
+static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va,
+			  size_t bytes, u32 flags)
+{
+	struct sg_table *sgt;
+
+	sgt = sgtable_alloc(bytes, flags);
+	if (IS_ERR(sgt))
+		return PTR_ERR(sgt);
+
+	sgtable_fill_kmalloc(sgt, pa, bytes);
+
+	da = map_iommu_region(obj, da, sgt, va, bytes, flags);
+	if (IS_ERR_VALUE(da)) {
+		sgtable_drain_kmalloc(sgt);
+		sgtable_free(sgt);
+	}
+
+	return da;
+}
+
+/**
+ * iommu_kmap  -  (d)-(p)-(v) address mapper
+ * @obj:	objective iommu
+ * @da:		contiguous iommu virtual memory
+ * @pa:		contiguous physical memory
+ * @flags:	iovma and page property
+ *
+ * Creates 1-1-1 mapping and returns @da again, which can be
+ * adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+		 u32 flags)
+{
+	void *va;
+
+	if (!obj || !obj->dev || !bytes)
+		return -EINVAL;
+
+	bytes = PAGE_ALIGN(bytes);
+
+	va = ioremap(pa, bytes);
+	if (!va)
+		return -ENOMEM;
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_LINEAR;
+	flags |= IOVMF_MMIO;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		iounmap(va);
+
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmap);
+
+/**
+ * iommu_kunmap  -  release virtual mapping obtained by 'iommu_kmap()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmap()'.
+ */
+void iommu_kunmap(struct iommu *obj, u32 da)
+{
+	struct sg_table *sgt;
+	typedef void (*func_t)(const void *);
+
+	sgt = unmap_vm_area(obj, da, (func_t)__iounmap,
+			    IOVMF_LINEAR | IOVMF_MMIO);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kunmap);
+
+/**
+ * iommu_kmalloc  -  (d)-(p)-(v) address allocator and mapper
+ * @obj:	objective iommu
+ * @da:		contiguous iommu virtual memory
+ * @bytes:	bytes for allocation
+ * @flags:	iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-1-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+	void *va;
+	u32 pa;
+
+	if (!obj || !obj->dev || !bytes)
+		return -EINVAL;
+
+	bytes = PAGE_ALIGN(bytes);
+
+	va = kmalloc(bytes, GFP_KERNEL | GFP_DMA);
+	if (!va)
+		return -ENOMEM;
+	pa = virt_to_phys(va);
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_LINEAR;
+	flags |= IOVMF_ALLOC;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		kfree(va);
+
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmalloc);
+
+/**
+ * iommu_kfree  -  release virtual mapping obtained by 'iommu_kmalloc()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmalloc()'.
+ */
+void iommu_kfree(struct iommu *obj, u32 da)
+{
+	struct sg_table *sgt;
+
+	sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kfree);
+
+
+static int __init iovmm_init(void)
+{
+	const unsigned long flags = SLAB_HWCACHE_ALIGN;
+	struct kmem_cache *p;
+
+	p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0,
+			      flags, NULL);
+	if (!p)
+		return -ENOMEM;
+	iovm_area_cachep = p;
+
+	return 0;
+}
+module_init(iovmm_init);
+
+static void __exit iovmm_exit(void)
+{
+	kmem_cache_destroy(iovm_area_cachep);
+}
+module_exit(iovmm_exit);
+
+MODULE_DESCRIPTION("omap iommu: simple virtual address space management");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 28b0a824b8c..efa0e0111f3 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -91,11 +91,20 @@ static void omap_mcbsp_dump_reg(u8 id)
 static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_tx = dev_id;
+	u16 irqst_spcr2;
 
-	dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
-		OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+	irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2);
+	dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
 
-	complete(&mcbsp_tx->tx_irq_completion);
+	if (irqst_spcr2 & XSYNC_ERR) {
+		dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
+			irqst_spcr2);
+		/* Writing zero to XSYNC_ERR clears the IRQ */
+		OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2,
+			irqst_spcr2 & ~(XSYNC_ERR));
+	} else {
+		complete(&mcbsp_tx->tx_irq_completion);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -103,11 +112,20 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_rx = dev_id;
+	u16 irqst_spcr1;
 
-	dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
-		OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+	irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1);
+	dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
 
-	complete(&mcbsp_rx->rx_irq_completion);
+	if (irqst_spcr1 & RSYNC_ERR) {
+		dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
+			irqst_spcr1);
+		/* Writing zero to RSYNC_ERR clears the IRQ */
+		OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1,
+			irqst_spcr1 & ~(RSYNC_ERR));
+	} else {
+		complete(&mcbsp_rx->tx_irq_completion);
+	}
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 80b040fd5ca..8d329fb2074 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,6 +54,9 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;
 
+	if (cpu_is_omap44xx())
+		return 0;
+
 	if (mux_cfg == NULL) {
 		printk(KERN_ERR "Pin mux table not initialized\n");
 		return -ENODEV;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index fa5297d643d..a5b9bcd6b10 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -38,12 +41,14 @@
 #define OMAP1_SRAM_VA		VMALLOC_END
 #define OMAP2_SRAM_PA		0x40200000
 #define OMAP2_SRAM_PUB_PA	0x4020f800
-#define OMAP2_SRAM_VA		VMALLOC_END
-#define OMAP2_SRAM_PUB_VA	(VMALLOC_END + 0x800)
+#define OMAP2_SRAM_VA		0xe3000000
+#define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
 #define OMAP3_SRAM_VA           0xd7000000
 #define OMAP3_SRAM_PUB_PA       0x40208000
 #define OMAP3_SRAM_PUB_VA       0xd7008000
+#define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
+#define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ	0x00
@@ -87,6 +92,10 @@ static int is_sram_locked(void)
 {
 	int type = 0;
 
+	if (cpu_is_omap44xx())
+		/* Not yet supported */
+		return 0;
+
 	if (cpu_is_omap242x())
 		type = omap_rev() & OMAP2_DEVICETYPE_MASK;
 
@@ -135,6 +144,10 @@ void __init omap_detect_sram(void)
 				omap_sram_base = OMAP3_SRAM_VA;
 				omap_sram_start = OMAP3_SRAM_PA;
 				omap_sram_size = 0x10000; /* 64K */
+			} else if (cpu_is_omap44xx()) {
+				omap_sram_base = OMAP4_SRAM_VA;
+				omap_sram_start = OMAP4_SRAM_PA;
+				omap_sram_size = 0x8000; /* 32K */
 			} else {
 				omap_sram_base = OMAP2_SRAM_VA;
 				omap_sram_start = OMAP2_SRAM_PA;
@@ -201,8 +214,23 @@ void __init omap_map_sram(void)
 		base = OMAP3_SRAM_PA;
 		base = ROUND_DOWN(base, PAGE_SIZE);
 		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+
+		/*
+		 * SRAM must be marked as non-cached on OMAP3 since the
+		 * CORE DPLL M2 divider change code (in SRAM) runs with the
+		 * SDRAM controller disabled, and if it is marked cached,
+		 * the ARM may attempt to write cache lines back to SDRAM
+		 * which will cause the system to hang.
+		 */
+		omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
 	}
 
+	if (cpu_is_omap44xx()) {
+		omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
+		base = OMAP4_SRAM_PA;
+		base = ROUND_DOWN(base, PAGE_SIZE);
+		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+	}
 	omap_sram_io_desc[0].length = 1024 * 1024;	/* Use section desc */
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
@@ -242,20 +270,13 @@ void * omap_sram_push(void * start, unsigned long size)
 	return (void *)omap_sram_ceil;
 }
 
-static void omap_sram_error(void)
-{
-	panic("Uninitialized SRAM function\n");
-}
-
 #ifdef CONFIG_ARCH_OMAP1
 
 static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
 
 void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
 {
-	if (!_omap_sram_reprogram_clock)
-		omap_sram_error();
-
+	BUG_ON(!_omap_sram_reprogram_clock);
 	_omap_sram_reprogram_clock(dpllctl, ckctl);
 }
 
@@ -280,9 +301,7 @@ static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 		   u32 base_cs, u32 force_unlock)
 {
-	if (!_omap2_sram_ddr_init)
-		omap_sram_error();
-
+	BUG_ON(!_omap2_sram_ddr_init);
 	_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
 			     base_cs, force_unlock);
 }
@@ -292,9 +311,7 @@ static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
 
 void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
 {
-	if (!_omap2_sram_reprogram_sdrc)
-		omap_sram_error();
-
+	BUG_ON(!_omap2_sram_reprogram_sdrc);
 	_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
 }
 
@@ -302,9 +319,7 @@ static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
 u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
 {
-	if (!_omap2_set_prcm)
-		omap_sram_error();
-
+	BUG_ON(!_omap2_set_prcm);
 	return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
 }
 #endif
@@ -356,16 +371,15 @@ static inline int omap243x_sram_init(void)
 static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
 					      u32 sdrc_actim_ctrla,
 					      u32 sdrc_actim_ctrlb,
-					      u32 m2);
+					      u32 m2, u32 unlock_dll);
 u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
-			      u32 sdrc_actim_ctrlb, u32 m2)
+			      u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll)
 {
-	if (!_omap3_sram_configure_core_dpll)
-		omap_sram_error();
-
+	BUG_ON(!_omap3_sram_configure_core_dpll);
 	return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
 					       sdrc_actim_ctrla,
-					       sdrc_actim_ctrlb, m2);
+					       sdrc_actim_ctrlb, m2,
+					       unlock_dll);
 }
 
 /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
@@ -406,6 +420,8 @@ int __init omap_sram_init(void)
 		omap243x_sram_init();
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();
+	else if (cpu_is_omap44xx())
+		omap34xx_sram_init(); /* FIXME: */
 
 	return 0;
 }
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 32eb9e33beb..e814803d474 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -15,10 +15,9 @@
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
 #include <linux/io.h>
-#include <asm/gpio.h>
+#include <linux/gpio.h>
 
 static DEFINE_SPINLOCK(gpio_lock);
-static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
 static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
 static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
 
@@ -46,82 +45,54 @@ static void __set_level(unsigned pin, int high)
 	writel(u, GPIO_OUT(pin));
 }
 
-
-/*
- * GENERIC_GPIO primitives.
- */
-int gpio_direction_input(unsigned pin)
+static inline void __set_blinking(unsigned pin, int blink)
 {
-	unsigned long flags;
-
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	/*
-	 * Some callers might not have used gpio_request(),
-	 * so flag this pin as requested now.
-	 */
-	if (gpio_label[pin] == NULL)
-		gpio_label[pin] = "?";
+	u32 u;
 
-	/*
-	 * Configure GPIO direction.
-	 */
-	__set_direction(pin, 1);
+	u = readl(GPIO_BLINK_EN(pin));
+	if (blink)
+		u |= 1 << (pin & 31);
+	else
+		u &= ~(1 << (pin & 31));
+	writel(u, GPIO_BLINK_EN(pin));
+}
 
-	spin_unlock_irqrestore(&gpio_lock, flags);
+static inline int orion_gpio_is_valid(unsigned pin, int mode)
+{
+	if (pin < GPIO_MAX) {
+		if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input))
+			goto err_out;
+		if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output))
+			goto err_out;
+		return true;
+	}
 
-	return 0;
+err_out:
+	pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+	return false;
 }
-EXPORT_SYMBOL(gpio_direction_input);
 
-int gpio_direction_output(unsigned pin, int value)
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
 {
 	unsigned long flags;
-	u32 u;
 
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+	if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK))
 		return -EINVAL;
-	}
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/*
-	 * Some callers might not have used gpio_request(),
-	 * so flag this pin as requested now.
-	 */
-	if (gpio_label[pin] == NULL)
-		gpio_label[pin] = "?";
-
-	/*
-	 * Disable blinking.
-	 */
-	u = readl(GPIO_BLINK_EN(pin));
-	u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
-
-	/*
-	 * Configure GPIO output value.
-	 */
-	__set_level(pin, value);
-
-	/*
-	 * Configure GPIO direction.
-	 */
-	__set_direction(pin, 0);
+	/* Configure GPIO direction. */
+	__set_direction(pin, 1);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
 	return 0;
 }
-EXPORT_SYMBOL(gpio_direction_output);
 
-int gpio_get_value(unsigned pin)
+static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin)
 {
 	int val;
 
@@ -132,83 +103,75 @@ int gpio_get_value(unsigned pin)
 
 	return (val >> (pin & 31)) & 1;
 }
-EXPORT_SYMBOL(gpio_get_value);
 
-void gpio_set_value(unsigned pin, int value)
+static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin,
+	int value)
 {
 	unsigned long flags;
-	u32 u;
+
+	if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+		return -EINVAL;
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/*
-	 * Disable blinking.
-	 */
-	u = readl(GPIO_BLINK_EN(pin));
-	u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
+	/* Disable blinking. */
+	__set_blinking(pin, 0);
 
-	/*
-	 * Configure GPIO output value.
-	 */
+	/* Configure GPIO output value. */
 	__set_level(pin, value);
 
+	/* Configure GPIO direction. */
+	__set_direction(pin, 0);
+
 	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
 }
-EXPORT_SYMBOL(gpio_set_value);
 
-int gpio_request(unsigned pin, const char *label)
+static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin,
+	int value)
 {
 	unsigned long flags;
-	int ret;
-
-	if (pin >= GPIO_MAX ||
-	    !(test_bit(pin, gpio_valid_input) ||
-	      test_bit(pin, gpio_valid_output))) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return -EINVAL;
-	}
 
 	spin_lock_irqsave(&gpio_lock, flags);
-	if (gpio_label[pin] == NULL) {
-		gpio_label[pin] = label ? label : "?";
-		ret = 0;
-	} else {
-		pr_debug("%s: GPIO %d already used as %s\n",
-			 __func__, pin, gpio_label[pin]);
-		ret = -EBUSY;
-	}
-	spin_unlock_irqrestore(&gpio_lock, flags);
 
-	return ret;
+	/* Configure GPIO output value. */
+	__set_level(pin, value);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
 }
-EXPORT_SYMBOL(gpio_request);
 
-void gpio_free(unsigned pin)
+static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
 {
-	if (pin >= GPIO_MAX ||
-	    !(test_bit(pin, gpio_valid_input) ||
-	      test_bit(pin, gpio_valid_output))) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return;
-	}
-
-	if (gpio_label[pin] == NULL)
-		pr_warning("%s: GPIO %d already freed\n", __func__, pin);
-	else
-		gpio_label[pin] = NULL;
+	if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) ||
+	    orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+		return 0;
+	return -EINVAL;
 }
-EXPORT_SYMBOL(gpio_free);
 
+static struct gpio_chip orion_gpiochip = {
+	.label			= "orion_gpio",
+	.direction_input	= orion_gpio_direction_input,
+	.get			= orion_gpio_get_value,
+	.direction_output	= orion_gpio_direction_output,
+	.set			= orion_gpio_set_value,
+	.request		= orion_gpio_request,
+	.base			= 0,
+	.ngpio			= GPIO_MAX,
+	.can_sleep		= 0,
+};
+
+void __init orion_gpio_init(void)
+{
+	gpiochip_add(&orion_gpiochip);
+}
 
 /*
  * Orion-specific GPIO API extensions.
  */
 void __init orion_gpio_set_unused(unsigned pin)
 {
-	/*
-	 * Configure as output, drive low.
-	 */
+	/* Configure as output, drive low. */
 	__set_level(pin, 0);
 	__set_direction(pin, 0);
 }
@@ -230,21 +193,14 @@ void __init orion_gpio_set_valid(unsigned pin, int mode)
 void orion_gpio_set_blink(unsigned pin, int blink)
 {
 	unsigned long flags;
-	u32 u;
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/*
-	 * Set output value to zero.
-	 */
+	/* Set output value to zero. */
 	__set_level(pin, 0);
 
-	u = readl(GPIO_BLINK_EN(pin));
-	if (blink)
-		u |= 1 << (pin & 31);
-	else
-		u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
+	/* Set blinking. */
+	__set_blinking(pin, blink);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 }
@@ -368,7 +324,7 @@ static int gpio_irq_set_type(u32 irq, u32 type)
 }
 
 struct irq_chip orion_gpio_irq_chip = {
-	.name		= "orion_gpio",
+	.name		= "orion_gpio_irq",
 	.ack		= gpio_irq_ack,
 	.mask		= gpio_irq_mask,
 	.unmask		= gpio_irq_unmask,
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 33f6c6aec18..9646a94ed3d 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -14,12 +14,9 @@
 /*
  * GENERIC_GPIO primitives.
  */
-int gpio_request(unsigned pin, const char *label);
-void gpio_free(unsigned pin);
-int gpio_direction_input(unsigned pin);
-int gpio_direction_output(unsigned pin, int value);
-int gpio_get_value(unsigned pin);
-void gpio_set_value(unsigned pin, int value);
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
 
 /*
  * Orion-specific GPIO API extensions.
@@ -27,11 +24,13 @@ void gpio_set_value(unsigned pin, int value);
 void orion_gpio_set_unused(unsigned pin);
 void orion_gpio_set_blink(unsigned pin, int blink);
 
-#define GPIO_BIDI_OK		(1 << 0)
-#define GPIO_INPUT_OK		(1 << 1)
-#define GPIO_OUTPUT_OK		(1 << 2)
+#define GPIO_INPUT_OK		(1 << 0)
+#define GPIO_OUTPUT_OK		(1 << 1)
 void orion_gpio_set_valid(unsigned pin, int mode);
 
+/* Initialize gpiolib. */
+void __init orion_gpio_init(void);
+
 /*
  * GPIO interrupt handling.
  */
diff --git a/arch/arm/plat-orion/include/plat/orion5x_wdt.h b/arch/arm/plat-orion/include/plat/orion_wdt.h
index 3c9cf6a305e..665c362a2fb 100644
--- a/arch/arm/plat-orion/include/plat/orion5x_wdt.h
+++ b/arch/arm/plat-orion/include/plat/orion_wdt.h
@@ -1,15 +1,15 @@
 /*
- * arch/arm/plat-orion/include/plat/orion5x_wdt.h
+ * arch/arm/plat-orion/include/plat/orion_wdt.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __PLAT_ORION5X_WDT_H
-#define __PLAT_ORION5X_WDT_H
+#ifndef __PLAT_ORION_WDT_H
+#define __PLAT_ORION_WDT_H
 
-struct orion5x_wdt_platform_data {
+struct orion_wdt_platform_data {
 	u32	tclk;		/* no <linux/clk.h> support yet */
 };
 
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index de8a001fc3a..715a30177f2 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -12,11 +12,15 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/timer.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
 #include <mach/bridge-regs.h>
+#include <mach/hardware.h>
 
 /*
  * Number of timer ticks per jiffy.
@@ -39,6 +43,56 @@ static u32 ticks_per_jiffy;
 
 
 /*
+ * Orion's sched_clock implementation. It has a resolution of
+ * at least 7.5ns (133MHz TCLK) and a maximum value of 834 days.
+ *
+ * Because the hardware timer period is quite short (21 secs if
+ * 200MHz TCLK) and because cnt32_to_63() needs to be called at
+ * least once per half period to work properly, a kernel timer is
+ * set up to ensure this requirement is always met.
+ */
+#define TCLK2NS_SCALE_FACTOR 8
+
+static unsigned long tclk2ns_scale;
+
+unsigned long long sched_clock(void)
+{
+	unsigned long long v = cnt32_to_63(0xffffffff - readl(TIMER0_VAL));
+	return (v * tclk2ns_scale) >> TCLK2NS_SCALE_FACTOR;
+}
+
+static struct timer_list cnt32_to_63_keepwarm_timer;
+
+static void cnt32_to_63_keepwarm(unsigned long data)
+{
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+	(void) sched_clock();
+}
+
+static void __init setup_sched_clock(unsigned long tclk)
+{
+	unsigned long long v;
+	unsigned long data;
+
+	v = NSEC_PER_SEC;
+	v <<= TCLK2NS_SCALE_FACTOR;
+	v += tclk/2;
+	do_div(v, tclk);
+	/*
+	 * We want an even value to automatically clear the top bit
+	 * returned by cnt32_to_63() without an additional run time
+	 * instruction. So if the LSB is 1 then round it up.
+	 */
+	if (v & 1)
+		v++;
+	tclk2ns_scale = v;
+
+	data = (0xffffffffUL / tclk / 2 - 2) * HZ;
+	setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data);
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+}
+
+/*
  * Clocksource handling.
  */
 static cycle_t orion_clksrc_read(struct clocksource *cs)
@@ -176,6 +230,10 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
 
 	ticks_per_jiffy = (tclk + HZ/2) / HZ;
 
+	/*
+	 * Set scale and timer for sched_clock
+	 */
+	setup_sched_clock(tclk);
 
 	/*
 	 * Setup free-running clocksource timer (interrupts
@@ -190,7 +248,6 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
 	orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift);
 	clocksource_register(&orion_clksrc);
 
-
 	/*
 	 * Setup clockevent timer (interrupt-driven.)
 	 */
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 8f2c4c7fbd4..0264bfb0ca4 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -7,3 +7,5 @@ obj-y	:= dma.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
+
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/plat-pxa/include/plat/i2c.h
index 1a9f65e6ec0..1a9f65e6ec0 100644
--- a/arch/arm/mach-pxa/include/mach/i2c.h
+++ b/arch/arm/plat-pxa/include/plat/i2c.h
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index fcdd374437a..a9eabdcfa16 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -21,6 +21,19 @@
 
 #include <asm/div64.h>
 
+#define HAS_SECONDARY_PWM	0x10
+#define PWM_ID_BASE(d)		((d) & 0xf)
+
+static const struct platform_device_id pwm_id_table[] = {
+	/*   PWM    has_secondary_pwm? */
+	{ "pxa25x-pwm", 0 },
+	{ "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
+	{ "pxa168-pwm", 1 },
+	{ "pxa910-pwm", 1 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, pwm_id_table);
+
 /* PWM registers and bits definitions */
 #define PWMCR		(0x00)
 #define PWMDCR		(0x04)
@@ -31,7 +44,8 @@
 
 struct pwm_device {
 	struct list_head	node;
-	struct platform_device *pdev;
+	struct pwm_device	*secondary;
+	struct platform_device	*pdev;
 
 	const char	*label;
 	struct clk	*clk;
@@ -159,17 +173,17 @@ static inline void __add_pwm(struct pwm_device *pwm)
 	mutex_unlock(&pwm_lock);
 }
 
-static struct pwm_device *pwm_probe(struct platform_device *pdev,
-		unsigned int pwm_id, struct pwm_device *parent_pwm)
+static int __devinit pwm_probe(struct platform_device *pdev)
 {
-	struct pwm_device *pwm;
+	struct platform_device_id *id = platform_get_device_id(pdev);
+	struct pwm_device *pwm, *secondary = NULL;
 	struct resource *r;
 	int ret = 0;
 
 	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
 	if (pwm == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 	}
 
 	pwm->clk = clk_get(&pdev->dev, NULL);
@@ -180,16 +194,9 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
 	pwm->clk_enabled = 0;
 
 	pwm->use_count = 0;
-	pwm->pwm_id = pwm_id;
+	pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id;
 	pwm->pdev = pdev;
 
-	if (parent_pwm != NULL) {
-		/* registers for the second PWM has offset of 0x10 */
-		pwm->mmio_base = parent_pwm->mmio_base + 0x10;
-		__add_pwm(pwm);
-		return pwm;
-	}
-
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
@@ -211,9 +218,27 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
 		goto err_free_mem;
 	}
 
+	if (id->driver_data & HAS_SECONDARY_PWM) {
+		secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+		if (secondary == NULL) {
+			ret = -ENOMEM;
+			goto err_free_mem;
+		}
+
+		*secondary = *pwm;
+		pwm->secondary = secondary;
+
+		/* registers for the second PWM has offset of 0x10 */
+		secondary->mmio_base = pwm->mmio_base + 0x10;
+		secondary->pwm_id = pdev->id + 2;
+	}
+
 	__add_pwm(pwm);
+	if (secondary)
+		__add_pwm(secondary);
+
 	platform_set_drvdata(pdev, pwm);
-	return pwm;
+	return 0;
 
 err_free_mem:
 	release_mem_region(r->start, r->end - r->start + 1);
@@ -221,32 +246,7 @@ err_free_clk:
 	clk_put(pwm->clk);
 err_free:
 	kfree(pwm);
-	return ERR_PTR(ret);
-}
-
-static int __devinit pxa25x_pwm_probe(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
-
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	return 0;
-}
-
-static int __devinit pxa27x_pwm_probe(struct platform_device *pdev)
-{
-	struct pwm_device *pwm;
-
-	pwm = pwm_probe(pdev, pdev->id, NULL);
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	pwm = pwm_probe(pdev, pdev->id + 2, pwm);
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	return 0;
+	return ret;
 }
 
 static int __devexit pwm_remove(struct platform_device *pdev)
@@ -259,6 +259,12 @@ static int __devexit pwm_remove(struct platform_device *pdev)
 		return -ENODEV;
 
 	mutex_lock(&pwm_lock);
+
+	if (pwm->secondary) {
+		list_del(&pwm->secondary->node);
+		kfree(pwm->secondary);
+	}
+
 	list_del(&pwm->node);
 	mutex_unlock(&pwm_lock);
 
@@ -272,46 +278,25 @@ static int __devexit pwm_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_driver pxa25x_pwm_driver = {
+static struct platform_driver pwm_driver = {
 	.driver		= {
 		.name	= "pxa25x-pwm",
+		.owner	= THIS_MODULE,
 	},
-	.probe		= pxa25x_pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
-};
-
-static struct platform_driver pxa27x_pwm_driver = {
-	.driver		= {
-		.name	= "pxa27x-pwm",
-	},
-	.probe		= pxa27x_pwm_probe,
+	.probe		= pwm_probe,
 	.remove		= __devexit_p(pwm_remove),
+	.id_table	= pwm_id_table,
 };
 
 static int __init pwm_init(void)
 {
-	int ret = 0;
-
-	ret = platform_driver_register(&pxa25x_pwm_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa25x_pwm_driver\n");
-		return ret;
-	}
-
-	ret = platform_driver_register(&pxa27x_pwm_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa27x_pwm_driver\n");
-		return ret;
-	}
-
-	return ret;
+	return platform_driver_register(&pwm_driver);
 }
 arch_initcall(pwm_init);
 
 static void __exit pwm_exit(void)
 {
-	platform_driver_unregister(&pxa25x_pwm_driver);
-	platform_driver_unregister(&pxa27x_pwm_driver);
+	platform_driver_unregister(&pwm_driver);
 }
 module_exit(pwm_exit);
 
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index de9383814e5..935c7558469 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -71,6 +71,15 @@ config S3C2410_PM_DEBUG
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 	  for more information.
 
+config S3C_PM_DEBUG_LED_SMDK
+       bool "SMDK LED suspend/resume debugging"
+       depends on PM && (MACH_SMDK6410)
+       help
+         Say Y here to enable the use of the SMDK LEDs on the baseboard
+	 for debugging of the state of the suspend and resume process.
+
+	 Note, this currently only works for S3C64XX based SMDK boards.
+
 config S3C2410_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
 	depends on PM && CRC32
@@ -150,6 +159,13 @@ config S3C_GPIO_CFG_S3C64XX
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
+# DMA
+
+config S3C_DMA
+	bool
+	help
+	  Internal configuration for S3C DMA core
+
 # device definitions to compile in
 
 config S3C_DEV_HSMMC
@@ -172,4 +188,14 @@ config S3C_DEV_FB
 	help
 	  Compile in platform device definition for framebuffer
 
+config S3C_DEV_USB_HOST
+	bool
+	help
+	  Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+	bool
+	help
+	  Compile in platform device definition for USB high-speed OtG
+
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 8d7815d25a5..610651455a7 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -18,9 +18,14 @@ obj-y				+= pwm-clock.o
 obj-y				+= gpio.o
 obj-y				+= gpio-config.o
 
+# DMA support
+
+obj-$(CONFIG_S3C_DMA)		+= dma.o
+
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
 
 # devices
@@ -30,3 +35,5 @@ obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
+obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
+obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-s3c/dev-usb-hsotg.c
new file mode 100644
index 00000000000..e2f604b51c8
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-usb-hsotg.c
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB high-speed UDC/OtG block
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_usb_hsotg_resources[] = {
+	[0] = {
+		.start	= S3C_PA_USB_HSOTG,
+		.end	= S3C_PA_USB_HSOTG + 0x10000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_OTG,
+		.end	= IRQ_OTG,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_usb_hsotg = {
+	.name		= "s3c-hsotg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
+	.resource	= s3c_usb_hsotg_resources,
+};
diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-s3c/dev-usb.c
new file mode 100644
index 00000000000..2ee85abed6d
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-usb.c
@@ -0,0 +1,50 @@
+/* linux/arch/arm/plat-s3c/dev-usb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB host
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+
+static struct resource s3c_usb_resource[] = {
+	[0] = {
+		.start = S3C_PA_USBHOST,
+		.end   = S3C_PA_USBHOST + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_usb_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_usb = {
+	.name		  = "s3c2410-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
+	.resource	  = s3c_usb_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_usb_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_usb);
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
new file mode 100644
index 00000000000..c9db75c06af
--- /dev/null
+++ b/arch/arm/plat-s3c/dma.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s3c/dma.c
+ *
+ * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c2410_dma_buf;
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
+struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
+
+/* s3c_dma_lookup_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
+{
+	if (channel & DMACH_LOW_LEVEL)
+		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+	else
+		return s3c_dma_chan_map[channel];
+}
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
+
+	chan->op_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
+
+	chan->callback_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	chan->flags = flags;
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
index d71dd6d9ce5..260fdc6ad68 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-s3c/gpio.c
@@ -16,7 +16,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
 
 #ifdef CONFIG_S3C_GPIO_TRACK
 struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
@@ -140,6 +140,15 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
 	if (!gc->get)
 		gc->get = s3c_gpiolib_get;
 
+#ifdef CONFIG_PM
+	if (chip->pm != NULL) {
+		if (!chip->pm->save || !chip->pm->resume)
+			printk(KERN_ERR "gpio: %s has missing PM functions\n",
+			       gc->label);
+	} else
+		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
 	/* gpiochip_add() prints own failure message on error. */
 	ret = gpiochip_add(gc);
 	if (ret >= 0)
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index 43df2a404b0..d847bd476b6 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,12 @@ struct s3c_adc_client;
 extern int s3c_adc_start(struct s3c_adc_client *client,
 			 unsigned int channel, unsigned int nr_samples);
 
-extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					       void (*select)(unsigned selected),
-					       void (*conv)(unsigned d0, unsigned d1),
-					       unsigned int is_ts);
+extern struct s3c_adc_client *
+	s3c_adc_register(struct platform_device *pdev,
+			 void (*select)(unsigned selected),
+			 void (*conv)(unsigned d0, unsigned d1,
+				      unsigned *samples_left),
+			 unsigned int is_ts);
 
 extern void s3c_adc_release(struct s3c_adc_client *client);
 
diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h
index a10622eed43..d86af84b5b8 100644
--- a/arch/arm/plat-s3c/include/plat/clock.h
+++ b/arch/arm/plat-s3c/include/plat/clock.h
@@ -50,6 +50,7 @@ extern struct clk clk_xtal;
 extern struct clk clk_ext;
 
 /* S3C64XX specific clocks */
+extern struct clk clk_h2;
 extern struct clk clk_27m;
 extern struct clk clk_48m;
 
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index e62ae0fcfe5..be541cbba07 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -69,3 +69,6 @@ extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
 extern struct sysdev_class s3c2443_sysclass;
+extern struct sysdev_class s3c6410_sysclass;
+extern struct sysdev_class s3c64xx_sysclass;
+
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 26f0cec3ac0..a0b6768fddc 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -45,6 +45,7 @@ extern struct platform_device s3c_device_spi1;
 extern struct platform_device s3c_device_nand;
 
 extern struct platform_device s3c_device_usbgadget;
+extern struct platform_device s3c_device_usb_hsotg;
 
 /* s3c2440 specific devices */
 
diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-s3c/include/plat/dma-core.h
new file mode 100644
index 00000000000..32ff2a92cb3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/dma-core.h
@@ -0,0 +1,22 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung S3C DMA core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
+
+extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
new file mode 100644
index 00000000000..34dba98f08e
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/dma.h
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c2410_dma_buffresult {
+	S3C2410_RES_OK,
+	S3C2410_RES_ERR,
+	S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+	S3C2410_DMASRC_HW,		/* source is memory */
+	S3C2410_DMASRC_MEM		/* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+	S3C2410_DMAOP_START,
+	S3C2410_DMAOP_STOP,
+	S3C2410_DMAOP_PAUSE,
+	S3C2410_DMAOP_RESUME,
+	S3C2410_DMAOP_FLUSH,
+	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
+	S3C2410_DMAOP_STARTED,		/* indicate channel started */
+};
+
+struct s3c2410_dma_client {
+	char                *name;
+};
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+				   void *buf, int size,
+				   enum s3c2410_dma_buffresult result);
+
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+				   enum s3c2410_chan_op );
+
+
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(unsigned int channel,
+			       struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(unsigned int channel,
+				unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			       dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(unsigned int channel, int xferunit);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+				 unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(unsigned int channel,
+				   dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+
+
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h
index 2fc60a580ac..32af612767a 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-core.h
+++ b/arch/arm/plat-s3c/include/plat/gpio-core.h
@@ -20,6 +20,18 @@
  * specific code.
 */
 
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_pm - power management (suspend/resume) information
+ * @save: Routine to save the state of the GPIO block
+ * @resume: Routine to resume the GPIO block.
+ */
+struct s3c_gpio_pm {
+	void (*save)(struct s3c_gpio_chip *chip);
+	void (*resume)(struct s3c_gpio_chip *chip);
+};
+
 struct s3c_gpio_cfg;
 
 /**
@@ -27,6 +39,7 @@ struct s3c_gpio_cfg;
  * @chip: The chip structure to be exported via gpiolib.
  * @base: The base pointer to the gpio configuration registers.
  * @config: special function and pull-resistor control information.
+ * @pm_save: Save information for suspend/resume support.
  *
  * This wrapper provides the necessary information for the Samsung
  * specific gpios being registered with gpiolib.
@@ -34,7 +47,11 @@ struct s3c_gpio_cfg;
 struct s3c_gpio_chip {
 	struct gpio_chip	chip;
 	struct s3c_gpio_cfg	*config;
+	struct s3c_gpio_pm	*pm;
 	void __iomem		*base;
+#ifdef CONFIG_PM
+	u32			pm_save[4];
+#endif
 };
 
 static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
@@ -75,3 +92,16 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
 
 static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
 #endif
+
+#ifdef CONFIG_PM
+extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+#define __gpio_pm(x) x
+#else
+#define s3c_gpio_pm_1bit NULL
+#define s3c_gpio_pm_2bit NULL
+#define s3c_gpio_pm_4bit NULL
+#define __gpio_pm(x) NULL
+
+#endif /* CONFIG_PM */
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index 3779775133a..7a797192fcf 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -44,6 +44,8 @@ extern void (*pm_cpu_sleep)(void);
 
 extern unsigned long s3c_pm_flags;
 
+extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
+
 /* from sleep.S */
 
 extern int  s3c_cpu_save(unsigned long *saveblk);
@@ -88,6 +90,7 @@ struct pm_uart_save {
 	u32	ufcon;
 	u32	umcon;
 	u32	ubrdiv;
+	u32	udivslot;
 };
 
 /* helper functions to save/restore lists of registers. */
@@ -124,6 +127,18 @@ extern void s3c_pm_dbg(const char *msg, ...);
 #define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
 #endif
 
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+/**
+ * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
+ * @set: set bits for the state of the LEDs
+ * @clear: clear bits for the state of the LEDs.
+ */
+extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
+
+#else
+static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
+#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
+
 /* suspend memory checking */
 
 #ifdef CONFIG_S3C2410_PM_CHECK
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index 487d7d2a7e1..66af75a5cdd 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -189,6 +189,11 @@
 
 #define S3C2443_DIVSLOT		  (0x2C)
 
+/* S3C64XX interrupt registers. */
+#define S3C64XX_UINTP		0x30
+#define S3C64XX_UINTSP		0x34
+#define S3C64XX_UINTM		0x38
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
index c4ca3920ca4..f615308ccdf 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -67,12 +67,52 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
 
 /* Helper function availablity */
 
+extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+
+/* S3C6400 SDHCI setup */
+
+#ifdef CONFIG_S3C6400_SETUP_SDHCI
+extern char *s3c6400_hsmmc_clksrcs[4];
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+					 void __iomem *r,
+					 struct mmc_ios *ios,
+					 struct mmc_card *card);
+
+static inline void s3c6400_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+#endif  /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s3c6400_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C6400_SETUP_SDHCI */
+
+/* S3C6410 SDHCI setup */
+
 #ifdef CONFIG_S3C6410_SETUP_SDHCI
 extern char *s3c6410_hsmmc_clksrcs[4];
 
-extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-
 extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 					   void __iomem *r,
 					   struct mmc_ios *ios,
@@ -82,7 +122,7 @@ extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 static inline void s3c6410_default_sdhci0(void)
 {
 	s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
 }
 #else
@@ -93,7 +133,7 @@ static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void)
 {
 	s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
 }
 #else
diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-s3c/include/plat/udc-hs.h
new file mode 100644
index 00000000000..dd04db04310
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/udc-hs.h
@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c/include/plat/udc-hs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG platform information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c_hostg_dmamode {
+	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
+	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
+	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
+};
+
+/**
+ * struct s3c_hsotg_plat - platform data for high-speed otg/udc
+ * @dma: Whether to use DMA or not.
+ * @is_osc: The clock source is an oscillator, not a crystal
+ */
+struct s3c_hsotg_plat {
+	enum s3c_hostg_dmamode	dma;
+	unsigned int		is_osc : 1;
+};
diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
new file mode 100644
index 00000000000..54b762acb5a
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
@@ -0,0 +1,49 @@
+/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-watchdog.h>
+#include <mach/map.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+static inline void arch_wdt_reset(void)
+{
+	struct clk *wdtclk;
+
+	printk("arch_reset: attempting watchdog reset\n");
+
+	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
+
+	wdtclk = clk_get(NULL, "watchdog");
+	if (!IS_ERR(wdtclk)) {
+		clk_enable(wdtclk);
+	} else
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
+	/* put initial values into count and data */
+	__raw_writel(0x80, S3C2410_WTCNT);
+	__raw_writel(0x80, S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+}
diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-s3c/pm-gpio.c
new file mode 100644
index 00000000000..cfd326a8b69
--- /dev/null
+++ b/arch/arm/plat-s3c/pm-gpio.c
@@ -0,0 +1,380 @@
+
+/* linux/arch/arm/plat-s3c/pm-gpio.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/gpio-core.h>
+#include <plat/pm.h>
+
+/* PM GPIO helpers */
+
+#define OFFS_CON	(0x00)
+#define OFFS_DAT	(0x04)
+#define OFFS_UP		(0x08)
+
+static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+}
+
+static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon;
+
+	/* GPACON only has one bit per control / data and no PULLUPs.
+	 * GPACON[x] = 0 => Output, 1 => SFN */
+
+	/* first set all SFN bits to SFN */
+
+	gpcon = old_gpcon | gps_gpcon;
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* now set all the other bits */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_1bit = {
+	.save	= s3c_gpio_pm_1bit_save,
+	.resume = s3c_gpio_pm_1bit_resume,
+};
+
+static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+	return con >= 2;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+	return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+	return con == 1;
+}
+
+/**
+ * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * @chip: The chip information to resume.
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT }  Change DAT first
+ * { IN => SFN }  Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN }  Change CON first, so new data will not glitch
+ * { SFN => IN }  Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ *     state for when it is next output.
+ */
+static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon, old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	/* restore GPIO pull-up settings */
+	__raw_writel(chip->pm_save[2], base + OFFS_UP);
+
+	/* Create a change_mask of all the items that need to have
+	 * their CON value changed before their DAT value, so that
+	 * we minimise the work between the two settings.
+	 */
+
+	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+
+	/* Write the new CON settings */
+
+	gpcon = old_gpcon & ~change_mask;
+	gpcon |= gps_gpcon & change_mask;
+
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* Now change any items that require DAT,CON */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_2bit = {
+	.save	= s3c_gpio_pm_2bit_save,
+	.resume = s3c_gpio_pm_2bit_resume,
+};
+
+#ifdef CONFIG_ARCH_S3C64XX
+static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8)
+		chip->pm_save[0] = __raw_readl(chip->base - 4);
+}
+
+static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+{
+	u32 old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+	return change_mask;
+}
+
+static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+{
+	void __iomem *con = chip->base + (index * 4);
+	u32 old_gpcon = __raw_readl(con);
+	u32 gps_gpcon = chip->pm_save[index + 1];
+	u32 gpcon, mask;
+
+	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+
+	gpcon = old_gpcon & ~mask;
+	gpcon |= gps_gpcon & mask;
+
+	__raw_writel(gpcon, con);
+}
+
+static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon[2];
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpdat = chip->pm_save[2];
+
+	/* First, modify the CON settings */
+
+	old_gpcon[0] = 0;
+	old_gpcon[1] = __raw_readl(base + OFFS_CON);
+
+	s3c_gpio_pm_4bit_con(chip, 0);
+	if (chip->chip.ngpio > 8) {
+		old_gpcon[0] = __raw_readl(base - 4);
+		s3c_gpio_pm_4bit_con(chip, -1);
+	}
+
+	/* Now change the configurations that require DAT,CON */
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[1], base + OFFS_CON);
+	if (chip->chip.ngpio > 8)
+		__raw_writel(chip->pm_save[0], base - 4);
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[3], base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8) {
+		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[0], old_gpcon[1],
+			  __raw_readl(base - 4),
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+	} else
+		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[1],
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_4bit = {
+	.save	= s3c_gpio_pm_4bit_save,
+	.resume = s3c_gpio_pm_4bit_resume,
+};
+#endif /* CONFIG_ARCH_S3C64XX */
+
+/**
+ * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * @ourchip: The chip for suspend.
+ */
+static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+{
+	struct s3c_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->save == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->save(ourchip);
+}
+
+/**
+ * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ *
+ * For all the GPIO banks, save the state of each one ready for going
+ * into a suspend mode.
+ */
+void s3c_pm_save_gpios(void)
+{
+	struct s3c_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		if (!ourchip)
+			continue;
+
+		s3c_pm_save_gpio(ourchip);
+
+		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
+			  ourchip->chip.label,
+			  ourchip->pm_save[0],
+			  ourchip->pm_save[1],
+			  ourchip->pm_save[2],
+			  ourchip->pm_save[3]);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
+
+/**
+ * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * @ourchip: The suspended chip.
+ */
+static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+{
+	struct s3c_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->resume == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->resume(ourchip);
+}
+
+void s3c_pm_restore_gpios(void)
+{
+	struct s3c_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		if (!ourchip)
+			continue;
+
+		s3c_pm_resume_gpio(ourchip);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 061182ca66e..8d97db2c7a0 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -21,11 +21,10 @@
 
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
+#include <mach/map.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-irq.h>
 #include <asm/irq.h>
 
@@ -70,6 +69,8 @@ static inline void s3c_pm_debug_init(void)
 
 /* Save the UART configurations if we are configured for debug. */
 
+unsigned char pm_uart_udivslot;
+
 #ifdef CONFIG_S3C2410_PM_DEBUG
 
 struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
@@ -83,6 +84,12 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
 	save->umcon = __raw_readl(regs + S3C2410_UMCON);
 	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
+
+	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
+		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
 }
 
 static void s3c_pm_save_uarts(void)
@@ -98,11 +105,16 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
 {
 	void __iomem *regs = S3C_VA_UARTx(uart);
 
+	s3c_pm_arch_update_uart(regs, save);
+
 	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
 	__raw_writel(save->ucon,  regs + S3C2410_UCON);
 	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
 	__raw_writel(save->umcon, regs + S3C2410_UMCON);
 	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
 }
 
 static void s3c_pm_restore_uarts(void)
@@ -313,6 +325,9 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
 
+	/* LEDs should now be 1110 */
+	s3c_pm_debug_smdkled(1 << 1, 0);
+
 	s3c_pm_check_restore();
 
 	/* ok, let's return from sleep */
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 2c8a2f5d75f..5b0bc914f58 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -71,6 +71,7 @@ config PM_SIMTEC
 config S3C2410_DMA
 	bool "S3C2410 DMA support"
 	depends on ARCH_S3C2410
+	select S3C_DMA
 	help
 	  S3C2410 DMA support. This is needed for drivers like sound which
 	  use the S3C2410's DMA system to move data to and from the
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 91adfa71c17..ee1baf11ad9 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -45,7 +45,8 @@ struct s3c_adc_client {
 	unsigned char		 channel;
 
 	void	(*select_cb)(unsigned selected);
-	void	(*convert_cb)(unsigned val1, unsigned val2);
+	void	(*convert_cb)(unsigned val1, unsigned val2,
+			      unsigned *samples_left);
 };
 
 struct adc_device {
@@ -158,7 +159,8 @@ static void s3c_adc_default_select(unsigned select)
 
 struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
 					void (*select)(unsigned int selected),
-					void (*conv)(unsigned d0, unsigned d1),
+					void (*conv)(unsigned d0, unsigned d1,
+						     unsigned *samples_left),
 					unsigned int is_ts)
 {
 	struct s3c_adc_client *client;
@@ -227,9 +229,10 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 	data1 = readl(adc->regs + S3C2410_ADCDAT1);
 	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
 
-	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
+	client->nr_samples--;
+	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
 
-	if (--client->nr_samples > 0) {
+	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
 
 		client->select_cb(1);
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 1a8347cec20..aa119863c5c 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 
@@ -47,27 +48,27 @@
 /* LED devices */
 
 static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.gpio		= S3C2410_GPF4,
+	.gpio		= S3C2410_GPF(4),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led4",
 	.def_trigger	= "timer",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.gpio		= S3C2410_GPF5,
+	.gpio		= S3C2410_GPF(5),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led5",
 	.def_trigger	= "nand-disk",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.gpio		= S3C2410_GPF6,
+	.gpio		= S3C2410_GPF(6),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led6",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.gpio		= S3C2410_GPF7,
+	.gpio		= S3C2410_GPF(7),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led7",
 };
@@ -184,15 +185,15 @@ void __init smdk_machine_init(void)
 {
 	/* Configure the LEDs (even if we have no LED support)*/
 
-	s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPF4, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF5, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF6, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF7, 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
 
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 16ac01d9b8a..4eb378c89a3 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -136,36 +136,6 @@ struct platform_device *s3c24xx_uart_src[4] = {
 struct platform_device *s3c24xx_uart_devs[4] = {
 };
 
-/* USB Host Controller */
-
-static struct resource s3c_usb_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_USBHOST,
-		.end   = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_usb = {
-	.name		  = "s3c2410-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
-	.resource	  = s3c_usb_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_usb_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_usb);
-
 /* LCD Controller */
 
 static struct resource s3c_lcd_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 07326f63236..196b1912365 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -31,10 +31,10 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/dma.h>
-
 #include <mach/map.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
+#include <plat/regs-dma.h>
 
 /* io map for dma */
 static void __iomem *dma_base;
@@ -44,8 +44,6 @@ static int dma_channels;
 
 static struct s3c24xx_dma_selection dma_sel;
 
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
 
 /* debugging functions */
 
@@ -135,21 +133,6 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
 #define dbg_showchan(chan) do { } while(0)
 #endif /* CONFIG_S3C2410_DMA_DEBUG */
 
-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
-
-/* lookup_dma_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return dma_chan_map[channel];
-}
-
 /* s3c2410_dma_stats_timeout
  *
  * Update DMA stats from timeout info
@@ -214,8 +197,6 @@ s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
 	return 0;
 }
 
-
-
 /* s3c2410_dma_loadbuffer
  *
  * load a buffer, and update the channel state
@@ -453,7 +434,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
 int s3c2410_dma_enqueue(unsigned int channel, void *id,
 			dma_addr_t data, int size)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	struct s3c2410_dma_buf *buf;
 	unsigned long flags;
 
@@ -804,7 +785,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
 
 int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned long flags;
 
 	if (chan == NULL)
@@ -836,7 +817,7 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 	chan->irq_claimed = 0;
 
 	if (!(channel & DMACH_LOW_LEVEL))
-		dma_chan_map[channel] = NULL;
+		s3c_dma_chan_map[channel] = NULL;
 
 	local_irq_restore(flags);
 
@@ -995,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 int
 s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
 	if (chan == NULL)
 		return -EINVAL;
@@ -1038,14 +1019,13 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
 /* s3c2410_dma_config
  *
  * xfersize:     size of unit in bytes (1,2,4)
- * dcon:         base value of the DCONx register
 */
 
 int s3c2410_dma_config(unsigned int channel,
-		       int xferunit,
-		       int dcon)
+		       int xferunit)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned int dcon;
 
 	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
 		 __func__, channel, xferunit, dcon);
@@ -1055,10 +1035,33 @@ int s3c2410_dma_config(unsigned int channel,
 
 	pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
 
-	dcon |= chan->dcon & dma_sel.dcon_mask;
+	dcon = chan->dcon & dma_sel.dcon_mask;
 
 	pr_debug("%s: New dcon is %08x\n", __func__, dcon);
 
+	switch (chan->req_ch) {
+	case DMACH_I2S_IN:
+	case DMACH_I2S_OUT:
+	case DMACH_PCM_IN:
+	case DMACH_PCM_OUT:
+	case DMACH_MIC_IN:
+	default:
+		dcon |= S3C2410_DCON_HANDSHAKE;
+		dcon |= S3C2410_DCON_SYNC_PCLK;
+		break;
+
+	case DMACH_SDI:
+		/* note, ensure if need HANDSHAKE or not */
+		dcon |= S3C2410_DCON_SYNC_PCLK;
+		break;
+
+	case DMACH_XD0:
+	case DMACH_XD1:
+		dcon |= S3C2410_DCON_HANDSHAKE;
+		dcon |= S3C2410_DCON_SYNC_HCLK;
+		break;
+	}
+
 	switch (xferunit) {
 	case 1:
 		dcon |= S3C2410_DCON_BYTE;
@@ -1090,58 +1093,6 @@ int s3c2410_dma_config(unsigned int channel,
 
 EXPORT_SYMBOL(s3c2410_dma_config);
 
-int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
-
-	chan->flags = flags;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
 
 /* s3c2410_dma_devconfig
  *
@@ -1150,29 +1101,38 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
  * source:    S3C2410_DMASRC_HW: source is hardware
  *            S3C2410_DMASRC_MEM: source is memory
  *
- * hwcfg:     the value for xxxSTCn register,
- *            bit 0: 0=increment pointer, 1=leave pointer
- *            bit 1: 0=source is AHB, 1=source is APB
- *
  * devaddr:   physical address of the source
 */
 
 int s3c2410_dma_devconfig(int channel,
 			  enum s3c2410_dmasrc source,
-			  int hwcfg,
 			  unsigned long devaddr)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned int hwcfg;
 
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
-		 __func__, (int)source, hwcfg, devaddr);
+	pr_debug("%s: source=%d, devaddr=%08lx\n",
+		 __func__, (int)source, devaddr);
 
 	chan->source = source;
 	chan->dev_addr = devaddr;
-	chan->hw_cfg = hwcfg;
+
+	switch (chan->req_ch) {
+	case DMACH_XD0:
+	case DMACH_XD1:
+		hwcfg = 0; /* AHB */
+		break;
+
+	default:
+		hwcfg = S3C2410_DISRCC_APB;
+	}
+
+	/* always assume our peripheral desintation is a fixed
+	 * address in memory. */
+	 hwcfg |= S3C2410_DISRCC_INC;
 
 	switch (source) {
 	case S3C2410_DMASRC_HW:
@@ -1219,7 +1179,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
 
 int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
 {
- 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
 	if (chan == NULL)
 		return -EINVAL;
@@ -1278,8 +1238,8 @@ static int s3c2410_dma_resume(struct sys_device *dev)
 
 	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
 
-	s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
-	s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
+	s3c2410_dma_config(no, cp->xfer_unit);
+	s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
 
 	/* re-select the dma source for this channel */
 
@@ -1476,7 +1436,8 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
  found:
 	dmach = &s3c2410_chans[ch];
 	dmach->map = ch_map;
-	dma_chan_map[channel] = dmach;
+	dmach->req_ch = channel;
+	s3c_dma_chan_map[channel] = dmach;
 
 	/* select the channel */
 
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index 4a899c279eb..95df059b5a1 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -183,35 +183,19 @@ EXPORT_SYMBOL(s3c2410_modify_misccr);
 
 int s3c2410_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
-		return -1;	/* not valid interrupts */
+	if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
+		return -EINVAL;	/* not valid interrupts */
 
-	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
-		return -1;	/* not valid pin */
+	if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
+		return -EINVAL;	/* not valid pin */
 
-	if (pin < S3C2410_GPF4)
-		return (pin - S3C2410_GPF0) + IRQ_EINT0;
+	if (pin < S3C2410_GPF(4))
+		return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
 
-	if (pin < S3C2410_GPG0)
-		return (pin - S3C2410_GPF4) + IRQ_EINT4;
+	if (pin < S3C2410_GPG(0))
+		return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
 
-	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+	return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_getirq);
-
-int s3c2410_gpio_irq2pin(unsigned int irq)
-{
-	if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
-		return S3C2410_GPF0 + (irq - IRQ_EINT0);
-
-	if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
-		return S3C2410_GPF4 + (irq - IRQ_EINT4);
-
-	if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
-		return S3C2410_GPG0 + (irq - IRQ_EINT8);
-
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 5c0491bf738..6d7a961d326 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/sysdev.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -22,6 +23,7 @@
 #include <mach/gpio-core.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <plat/pm.h>
 
 #include <mach/regs-gpio.h>
 
@@ -77,9 +79,10 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
 
 struct s3c_gpio_chip s3c24xx_gpios[] = {
 	[0] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
+		.base	= S3C2410_GPACON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
 		.chip	= {
-			.base			= S3C2410_GPA0,
+			.base			= S3C2410_GPA(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOA",
 			.ngpio			= 24,
@@ -88,45 +91,50 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[1] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPB0),
+		.base	= S3C2410_GPBCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPB0,
+			.base			= S3C2410_GPB(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOB",
 			.ngpio			= 16,
 		},
 	},
 	[2] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPC0),
+		.base	= S3C2410_GPCCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPC0,
+			.base			= S3C2410_GPC(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOC",
 			.ngpio			= 16,
 		},
 	},
 	[3] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPD0),
+		.base	= S3C2410_GPDCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPD0,
+			.base			= S3C2410_GPD(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOD",
 			.ngpio			= 16,
 		},
 	},
 	[4] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPE0),
+		.base	= S3C2410_GPECON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPE0,
+			.base			= S3C2410_GPE(0),
 			.label			= "GPIOE",
 			.owner			= THIS_MODULE,
 			.ngpio			= 16,
 		},
 	},
 	[5] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPF0),
+		.base	= S3C2410_GPFCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPF0,
+			.base			= S3C2410_GPF(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOF",
 			.ngpio			= 8,
@@ -134,14 +142,24 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[6] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPG0),
+		.base	= S3C2410_GPGCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPG0,
+			.base			= S3C2410_GPG(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOG",
-			.ngpio			= 10,
+			.ngpio			= 16,
 			.to_irq			= s3c24xx_gpiolib_bankg_toirq,
 		},
+	}, {
+		.base	= S3C2410_GPHCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPH(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOH",
+			.ngpio			= 11,
+		},
 	},
 };
 
@@ -156,4 +174,4 @@ static __init int s3c24xx_gpiolib_init(void)
 	return 0;
 }
 
-arch_initcall(s3c24xx_gpiolib_init);
+core_initcall(s3c24xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma.h b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
index c78efe316fc..9565ead1bc9 100644
--- a/arch/arm/plat-s3c24xx/include/plat/dma.h
+++ b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/dma.h
+/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
  *
  * Copyright (C) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -10,8 +10,10 @@
  * published by the Free Software Foundation.
 */
 
+#include <plat/dma-core.h>
+
 extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
 
 #define DMA_CH_VALID		(1<<31)
 #define DMA_CH_NEVER		(1<<30)
@@ -31,8 +33,8 @@ struct s3c24xx_dma_map {
 	const char		*name;
 	struct s3c24xx_dma_addr  hw_addr;
 
-	unsigned long		 channels[S3C2410_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C2410_DMA_CHANNELS];
+	unsigned long		 channels[S3C_DMA_CHANNELS];
+	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
 };
 
 struct s3c24xx_dma_selection {
@@ -58,7 +60,7 @@ extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
 */
 
 struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
+	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
 	unsigned int	flags;				/* flags */
 };
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index eed8f78e759..c4d133436fc 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -58,7 +58,6 @@
 #define S3C24XX_SZ_SPI		SZ_1M
 #define S3C24XX_SZ_SDI		SZ_1M
 #define S3C24XX_SZ_NAND		SZ_1M
-#define S3C24XX_SZ_USBHOST	SZ_1M
 
 /* GPIO ports */
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
index c75882113e0..fb45dd9adca 100644
--- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
@@ -57,3 +57,8 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
 	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
 				s3c_irqwake_eintmask);
 }
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
new file mode 100644
index 00000000000..3bc0a216df9
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -0,0 +1,145 @@
+/* arch/arm/mach-s3c2410/include/mach/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC		(0x00)
+#define S3C2410_DMA_DISRCC		(0x04)
+#define S3C2410_DMA_DIDST		(0x08)
+#define S3C2410_DMA_DIDSTC		(0x0C)
+#define S3C2410_DMA_DCON		(0x10)
+#define S3C2410_DMA_DSTAT		(0x14)
+#define S3C2410_DMA_DCSRC		(0x18)
+#define S3C2410_DMA_DCDST		(0x1C)
+#define S3C2410_DMA_DMASKTRIG		(0x20)
+#define S3C2412_DMA_DMAREQSEL		(0x24)
+#define S3C2443_DMA_DMAREQSEL		(0x24)
+
+#define S3C2410_DISRCC_INC		(1<<0)
+#define S3C2410_DISRCC_APB		(1<<1)
+
+#define S3C2410_DMASKTRIG_STOP		(1<<2)
+#define S3C2410_DMASKTRIG_ON		(1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG	(1<<0)
+
+#define S3C2410_DCON_DEMAND		(0<<31)
+#define S3C2410_DCON_HANDSHAKE		(1<<31)
+#define S3C2410_DCON_SYNC_PCLK		(0<<30)
+#define S3C2410_DCON_SYNC_HCLK		(1<<30)
+
+#define S3C2410_DCON_INTREQ		(1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0		(0<<24)
+#define S3C2410_DCON_CH0_UART0		(1<<24)
+#define S3C2410_DCON_CH0_SDI		(2<<24)
+#define S3C2410_DCON_CH0_TIMER		(3<<24)
+#define S3C2410_DCON_CH0_USBEP1		(4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1		(0<<24)
+#define S3C2410_DCON_CH1_UART1		(1<<24)
+#define S3C2410_DCON_CH1_I2SSDI		(2<<24)
+#define S3C2410_DCON_CH1_SPI		(3<<24)
+#define S3C2410_DCON_CH1_USBEP2		(4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO		(0<<24)
+#define S3C2410_DCON_CH2_I2SSDI		(1<<24)
+#define S3C2410_DCON_CH2_SDI		(2<<24)
+#define S3C2410_DCON_CH2_TIMER		(3<<24)
+#define S3C2410_DCON_CH2_USBEP3		(4<<24)
+
+#define S3C2410_DCON_CH3_UART2		(0<<24)
+#define S3C2410_DCON_CH3_SDI		(1<<24)
+#define S3C2410_DCON_CH3_SPI		(2<<24)
+#define S3C2410_DCON_CH3_TIMER		(3<<24)
+#define S3C2410_DCON_CH3_USBEP4		(4<<24)
+
+#define S3C2410_DCON_SRCSHIFT		(24)
+#define S3C2410_DCON_SRCMASK		(7<<24)
+
+#define S3C2410_DCON_BYTE		(0<<20)
+#define S3C2410_DCON_HALFWORD		(1<<20)
+#define S3C2410_DCON_WORD		(2<<20)
+
+#define S3C2410_DCON_AUTORELOAD		(0<<22)
+#define S3C2410_DCON_NORELOAD		(1<<22)
+#define S3C2410_DCON_HWTRIG		(1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT		(1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO		(5<<24)
+#define S3C2440_DCON_CH0_PCMIN		(6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT		(5<<24)
+#define S3C2440_DCON_CH1_SDI		(6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN		(5<<24)
+#define S3C2440_DCON_CH2_MICIN		(6<<24)
+
+#define S3C2440_DCON_CH3_MICIN		(5<<24)
+#define S3C2440_DCON_CH3_PCMOUT		(6<<24)
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2412_DMAREQSEL_HW		(1)
+
+#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+
+#endif
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 062a29339a9..56e5253ca02 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -30,6 +30,7 @@
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/time.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
@@ -75,43 +76,10 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_CLKSLOW),
 };
 
-static struct gpio_sleep {
-	void __iomem	*base;
-	unsigned int	 gpcon;
-	unsigned int	 gpdat;
-	unsigned int	 gpup;
-} gpio_save[] = {
-	[0] = {
-		.base	= S3C2410_GPACON,
-	},
-	[1] = {
-		.base	= S3C2410_GPBCON,
-	},
-	[2] = {
-		.base	= S3C2410_GPCCON,
-	},
-	[3] = {
-		.base	= S3C2410_GPDCON,
-	},
-	[4] = {
-		.base	= S3C2410_GPECON,
-	},
-	[5] = {
-		.base	= S3C2410_GPFCON,
-	},
-	[6] = {
-		.base	= S3C2410_GPGCON,
-	},
-	[7] = {
-		.base	= S3C2410_GPHCON,
-	},
-};
-
 static struct sleep_save misc_save[] = {
 	SAVE_ITEM(S3C2410_DCLKCON),
 };
 
-
 /* s3c_pm_check_resume_pin
  *
  * check to see if the pin is configured correctly for sleep mode, and
@@ -156,195 +124,15 @@ void s3c_pm_configure_extint(void)
 	 * and then configure it as an input if it is not
 	*/
 
-	for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
-		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
-	}
-
-	for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
-		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+	for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
+		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
 	}
-}
-
-/* offsets for CON/DAT/UP registers */
-
-#define OFFS_CON	(S3C2410_GPACON - S3C2410_GPACON)
-#define OFFS_DAT	(S3C2410_GPADAT - S3C2410_GPACON)
-#define OFFS_UP		(S3C2410_GPBUP  - S3C2410_GPBCON)
-
-/* s3c_pm_save_gpios()
- *
- * Save the state of the GPIOs
- */
-
-void s3c_pm_save_gpios(void)
-{
-	struct gpio_sleep *gps = gpio_save;
-	unsigned int gpio;
-
-	for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
-		void __iomem *base = gps->base;
-
-		gps->gpcon = __raw_readl(base + OFFS_CON);
-		gps->gpdat = __raw_readl(base + OFFS_DAT);
-
-		if (gpio > 0)
-			gps->gpup = __raw_readl(base + OFFS_UP);
 
+	for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
+		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
 	}
 }
 
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
-	return (con == 2 || con == 3);
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
-	return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
-	return con == 1;
-}
-
-/**
- * s3c2410_pm_restore_gpio() - restore the given GPIO bank
- * @index: The number of the GPIO bank being resumed.
- * @gps: The sleep confgiuration for the bank.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT }  Change DAT first
- * { IN => SFN }  Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN }  Change CON first, so new data will not glitch
- * { SFN => IN }  Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- *     state for when it is next output.
- */
-
-static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
-{
-	void __iomem *base = gps->base;
-	unsigned long gps_gpcon = gps->gpcon;
-	unsigned long gps_gpdat = gps->gpdat;
-	unsigned long old_gpcon;
-	unsigned long old_gpdat;
-	unsigned long old_gpup = 0x0;
-	unsigned long gpcon;
-	int nr;
-
-	old_gpcon = __raw_readl(base + OFFS_CON);
-	old_gpdat = __raw_readl(base + OFFS_DAT);
-
-	if (base == S3C2410_GPACON) {
-		/* GPACON only has one bit per control / data and no PULLUPs.
-		 * GPACON[x] = 0 => Output, 1 => SFN */
-
-		/* first set all SFN bits to SFN */
-
-		gpcon = old_gpcon | gps->gpcon;
-		__raw_writel(gpcon, base + OFFS_CON);
-
-		/* now set all the other bits */
-
-		__raw_writel(gps_gpdat, base + OFFS_DAT);
-		__raw_writel(gps_gpcon, base + OFFS_CON);
-	} else {
-		unsigned long old, new, mask;
-		unsigned long change_mask = 0x0;
-
-		old_gpup = __raw_readl(base + OFFS_UP);
-
-		/* Create a change_mask of all the items that need to have
-		 * their CON value changed before their DAT value, so that
-		 * we minimise the work between the two settings.
-		 */
-
-		for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
-			old = (old_gpcon & mask) >> nr;
-			new = (gps_gpcon & mask) >> nr;
-
-			/* If there is no change, then skip */
-
-			if (old == new)
-				continue;
-
-			/* If both are special function, then skip */
-
-			if (is_sfn(old) && is_sfn(new))
-				continue;
-
-			/* Change is IN => OUT, do not change now */
-
-			if (is_in(old) && is_out(new))
-				continue;
-
-			/* Change is SFN => OUT, do not change now */
-
-			if (is_sfn(old) && is_out(new))
-				continue;
-
-			/* We should now be at the case of IN=>SFN,
-			 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-			change_mask |= mask;
-		}
-
-		/* Write the new CON settings */
-
-		gpcon = old_gpcon & ~change_mask;
-		gpcon |= gps_gpcon & change_mask;
-
-		__raw_writel(gpcon, base + OFFS_CON);
-
-		/* Now change any items that require DAT,CON */
-
-		__raw_writel(gps_gpdat, base + OFFS_DAT);
-		__raw_writel(gps_gpcon, base + OFFS_CON);
-		__raw_writel(gps->gpup, base + OFFS_UP);
-	}
-
-	S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
-		  index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-
-/** s3c2410_pm_restore_gpios()
- *
- * Restore the state of the GPIOs
- */
-
-void s3c_pm_restore_gpios(void)
-{
-	struct gpio_sleep *gps = gpio_save;
-	int gpio;
-
-	for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
-		s3c2410_pm_restore_gpio(gpio, gps);
-	}
-}
 
 void s3c_pm_restore_core(void)
 {
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
index d62b7e7fb35..71a6accf114 100644
--- a/arch/arm/plat-s3c24xx/setup-i2c.c
+++ b/arch/arm/plat-s3c24xx/setup-i2c.c
@@ -11,6 +11,7 @@
 */
 
 #include <linux/kernel.h>
+#include <linux/gpio.h>
 
 struct platform_device;
 
@@ -20,6 +21,6 @@ struct platform_device;
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 8b403cbb53d..9edf7894eed 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 					  int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
-		s3c2410_gpio_pullup(S3C2410_GPE11, 0);
-		s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
+		s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
+		s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPE11, 1);
-		s3c2410_gpio_pullup(S3C2410_GPE12, 1);
-		s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
+		s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
+		s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 8fccd4e549f..f34d0fc69ad 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 				       int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
-		s3c2410_gpio_pullup(S3C2410_GPG5, 0);
-		s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
+		s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
+		s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPG5, 1);
-		s3c2410_gpio_pullup(S3C2410_GPG6, 1);
-		s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
+		s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
+		s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
 	}
 }
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 54375a00a7d..5ebd8b425a5 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
 	select S3C_GPIO_PULL_UPDOWN
 	select S3C_GPIO_CFG_S3C24XX
 	select S3C_GPIO_CFG_S3C64XX
+	select USB_ARCH_HAS_OHCI
 	help
 	  Base platform code for any Samsung S3C64XX device
 
@@ -38,6 +39,10 @@ config CPU_S3C6400_CLOCK
 	  Common clock support code for the S3C6400 that is shared
 	  by other CPUs in the series, such as the S3C6410.
 
+config S3C64XX_DMA
+	bool "S3C64XX DMA"
+	select S3C_DMA
+
 # platform specific device setup
 
 config S3C64XX_SETUP_I2C0
@@ -59,4 +64,9 @@ config S3C64XX_SETUP_FB_24BPP
 	help
 	  Common setup code for S3C64XX with an 24bpp RGB display helper.
 
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
 endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 2e6d79bf8f3..2ed5df34f9e 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -24,8 +24,19 @@ obj-y				+= gpiolib.o
 obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
 obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
 
+# PM support
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_PM)		+= irq-pm.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+
 # Device setup
 
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
index ad1b9682c9c..0bc2fa1dfc4 100644
--- a/arch/arm/plat-s3c64xx/clock.c
+++ b/arch/arm/plat-s3c64xx/clock.c
@@ -27,6 +27,12 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
+struct clk clk_h2 = {
+	.name		= "hclk2",
+	.id		= -1,
+	.rate		= 0,
+};
+
 struct clk clk_27m = {
 	.name		= "clk_27m",
 	.id		= -1,
@@ -152,6 +158,18 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_48m,
 		.enable		= s3c64xx_sclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
+	}, {
+		.name		= "dma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
+	}, {
+		.name		= "dma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
 	},
 };
 
@@ -246,6 +264,7 @@ static struct clk *clks[] __initdata = {
 	&clk_epll,
 	&clk_27m,
 	&clk_48m,
+	&clk_h2,
 };
 
 void __init s3c64xx_register_clocks(void)
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index 91f49a3a665..b1fdd83940a 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -101,9 +102,24 @@ static struct map_desc s3c_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	},
 };
 
+
+struct sysdev_class s3c64xx_sysclass = {
+	.name	= "s3c64xx-core",
+};
+
+static struct sys_device s3c64xx_sysdev = {
+	.cls	= &s3c64xx_sysclass,
+};
+
+
 /* read cpu identification code */
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@@ -115,5 +131,21 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 	iotable_init(mach_desc, size);
 
 	idcode = __raw_readl(S3C_VA_SYS + 0x118);
+	if (!idcode) {
+		/* S3C6400 has the ID register in a different place,
+		 * and needs a write before it can be read. */
+
+		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
+	}
+
 	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
+
+static __init int s3c64xx_sysdev_init(void)
+{
+	sysdev_class_register(&s3c64xx_sysclass);
+	return sysdev_register(&s3c64xx_sysdev);
+}
+
+core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
new file mode 100644
index 00000000000..67aa93dbb69
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -0,0 +1,722 @@
+/* linux/arch/arm/plat-s3c64xx/dma.c
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+#include <plat/regs-sys.h>
+
+#include <asm/hardware/pl080.h>
+
+/* dma channel state information */
+
+struct s3c64xx_dmac {
+	struct sys_device	 sysdev;
+	struct clk		*clk;
+	void __iomem		*regs;
+	struct s3c2410_dma_chan *channels;
+	enum dma_ch		 chanbase;
+};
+
+/* pool to provide LLI buffers */
+static struct dma_pool *dma_pool;
+
+/* Debug configuration and code */
+
+static unsigned char debug_show_buffs = 0;
+
+static void dbg_showchan(struct s3c2410_dma_chan *chan)
+{
+	pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
+		 chan->number,
+		 readl(chan->regs + PL080_CH_SRC_ADDR),
+		 readl(chan->regs + PL080_CH_DST_ADDR),
+		 readl(chan->regs + PL080_CH_LLI),
+		 readl(chan->regs + PL080_CH_CONTROL),
+		 readl(chan->regs + PL080S_CH_CONTROL2),
+		 readl(chan->regs + PL080S_CH_CONFIG));
+}
+
+static void show_lli(struct pl080s_lli *lli)
+{
+	pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
+		 lli, lli->src_addr, lli->dst_addr, lli->next_lli,
+		 lli->control0, lli->control1);
+}
+
+static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *ptr;
+	struct s3c64xx_dma_buff *end;
+
+	pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
+		 chan->number, chan->next, chan->curr, chan->end);
+
+	ptr = chan->next;
+	end = chan->end;
+
+	if (debug_show_buffs) {
+		for (; ptr != NULL; ptr = ptr->next) {
+			pr_debug("DMA%d: %08x ",
+				 chan->number, ptr->lli_dma);
+			show_lli(ptr->lli);
+		}
+	}
+}
+
+/* End of Debug */
+
+static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned int start, offs;
+
+	start = 0;
+
+	if (channel >= DMACH_PCM1_TX)
+		start = 8;
+
+	for (offs = 0; offs < 8; offs++) {
+		chan = &s3c2410_chans[start + offs];
+		if (!chan->in_use)
+			goto found;
+	}
+
+	return NULL;
+
+found:
+	s3c_dma_chan_map[channel] = chan;
+	return chan;
+}
+
+int s3c2410_dma_config(unsigned int channel, int xferunit)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	switch (xferunit) {
+	case 1:
+		chan->hw_width = 0;
+		break;
+	case 2:
+		chan->hw_width = 1;
+		break;
+	case 4:
+		chan->hw_width = 2;
+		break;
+	default:
+		printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
+				 struct pl080s_lli *lli,
+				 dma_addr_t data, int size)
+{
+	dma_addr_t src, dst;
+	u32 control0, control1;
+
+	switch (chan->source) {
+	case S3C2410_DMASRC_HW:
+		src = chan->dev_addr;
+		dst = data;
+		control0 = PL080_CONTROL_SRC_AHB2;
+		control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
+		control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
+		control0 |= PL080_CONTROL_DST_INCR;
+		break;
+
+	case S3C2410_DMASRC_MEM:
+		src = data;
+		dst = chan->dev_addr;
+		control0 = PL080_CONTROL_DST_AHB2;
+		control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+		control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
+		control0 |= PL080_CONTROL_SRC_INCR;
+		break;
+	default:
+		BUG();
+	}
+
+	/* note, we do not currently setup any of the burst controls */
+
+	control1 = size >> chan->hw_width;	/* size in no of xfers */
+	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
+	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
+
+	lli->src_addr = src;
+	lli->dst_addr = dst;
+	lli->next_lli = 0;
+	lli->control0 = control0;
+	lli->control1 = control1;
+}
+
+static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
+				struct pl080s_lli *lli)
+{
+	void __iomem *regs = chan->regs;
+
+	pr_debug("%s: LLI %p => regs\n", __func__, lli);
+	show_lli(lli);
+
+	writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
+	writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
+	writel(lli->next_lli, regs + PL080_CH_LLI);
+	writel(lli->control0, regs + PL080_CH_CONTROL);
+	writel(lli->control1, regs + PL080S_CH_CONTROL2);
+}
+
+static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dmac *dmac = chan->dmac;
+	u32 config;
+	u32 bit = chan->bit;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: clearing interrupts\n", __func__);
+
+	/* clear interrupts */
+	writel(bit, dmac->regs + PL080_TC_CLEAR);
+	writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+	pr_debug("%s: starting channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_ENABLE;
+
+	pr_debug("%s: writing config %08x\n", __func__, config);
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
+{
+	u32 config;
+	int timeout;
+
+	pr_debug("%s: stopping channel\n", __func__);
+
+	dbg_showchan(chan);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_HALT;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	timeout = 1000;
+	do {
+		config = readl(chan->regs + PL080S_CH_CONFIG);
+		pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
+		if (config & PL080_CONFIG_ACTIVE)
+			udelay(10);
+		else
+			break;
+		} while (--timeout > 0);
+
+	if (config & PL080_CONFIG_ACTIVE) {
+		printk(KERN_ERR "%s: channel still active\n", __func__);
+		return -EFAULT;
+	}
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
+					 struct s3c64xx_dma_buff *buf,
+					 enum s3c2410_dma_buffresult result)
+{
+	if (chan->callback_fn != NULL)
+		(chan->callback_fn)(chan, buf->pw, 0, result);
+}
+
+static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
+{
+	dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
+	kfree(buff);
+}
+
+static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *buff, *next;
+	u32 config;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: flushing channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	/* dump all the buffers associated with this channel */
+
+	for (buff = chan->curr; buff != NULL; buff = next) {
+		next = buff->next;
+		pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
+
+		s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
+		s3c64xx_dma_freebuff(buff);
+	}
+
+	chan->curr = chan->next = chan->end = NULL;
+
+	return 0;
+}
+
+int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		return s3c64xx_dma_start(chan);
+
+	case S3C2410_DMAOP_STOP:
+		return s3c64xx_dma_stop(chan);
+
+	case S3C2410_DMAOP_FLUSH:
+		return s3c64xx_dma_flush(chan);
+
+	/* belive PAUSE/RESUME are no-ops */
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+	case S3C2410_DMAOP_STARTED:
+	case S3C2410_DMAOP_TIMEOUT:
+		return 0;
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* s3c2410_dma_enque
+ *
+ */
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			dma_addr_t data, int size)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	struct s3c64xx_dma_buff *next;
+	struct s3c64xx_dma_buff *buff;
+	struct pl080s_lli *lli;
+	int ret;
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+	if (!buff) {
+		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
+		return -ENOMEM;
+	}
+
+	lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+	if (!lli) {
+		printk(KERN_ERR "%s: no memory for lli\n", __func__);
+		ret = -ENOMEM;
+		goto err_buff;
+	}
+
+	pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
+		 __func__, buff, data, lli, (u32)buff->lli_dma, size);
+
+	buff->lli = lli;
+	buff->pw = id;
+
+	s3c64xx_dma_fill_lli(chan, lli, data, size);
+
+	if ((next = chan->next) != NULL) {
+		struct s3c64xx_dma_buff *end = chan->end;
+		struct pl080s_lli *endlli = end->lli;
+
+		pr_debug("enquing onto channel\n");
+
+		end->next = buff;
+		endlli->next_lli = buff->lli_dma;
+
+		if (chan->flags & S3C2410_DMAF_CIRCULAR) {
+			struct s3c64xx_dma_buff *curr = chan->curr;
+			lli->next_lli = curr->lli_dma;
+		}
+
+		if (next == chan->curr) {
+			writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
+			chan->next = buff;
+		}
+
+		show_lli(endlli);
+		chan->end = buff;
+	} else {
+		pr_debug("enquing onto empty channel\n");
+
+		chan->curr = buff;
+		chan->next = buff;
+		chan->end = buff;
+
+		s3c64xx_lli_to_regs(chan, lli);
+	}
+
+	show_lli(lli);
+
+	dbg_showchan(chan);
+	dbg_showbuffs(chan);
+	return 0;
+
+err_buff:
+	kfree(buff);
+	return ret;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+
+int s3c2410_dma_devconfig(int channel,
+			  enum s3c2410_dmasrc source,
+			  unsigned long devaddr)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	u32 peripheral;
+	u32 config = 0;
+
+	pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
+		 __func__, channel, source, devaddr, chan);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	peripheral = (chan->peripheral & 0xf);
+	chan->source = source;
+	chan->dev_addr = devaddr;
+
+	pr_debug("%s: peripheral %d\n", __func__, peripheral);
+
+	switch (source) {
+	case S3C2410_DMASRC_HW:
+		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
+		break;
+	case S3C2410_DMASRC_MEM:
+		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
+		break;
+	default:
+		printk(KERN_ERR "%s: bad source\n", __func__);
+		return -EINVAL;
+	}
+
+	/* allow TC and ERR interrupts */
+	config |= PL080_CONFIG_TC_IRQ_MASK;
+	config |= PL080_CONFIG_ERR_IRQ_MASK;
+
+	pr_debug("%s: config %08x\n", __func__, config);
+
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+
+int s3c2410_dma_getposition(unsigned int channel,
+			    dma_addr_t *src, dma_addr_t *dst)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	if (src != NULL)
+		*src = readl(chan->regs + PL080_CH_SRC_ADDR);
+
+	if (dst != NULL)
+		*dst = readl(chan->regs + PL080_CH_DST_ADDR);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned long flags;
+
+	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+		 channel, client->name, dev);
+
+	local_irq_save(flags);
+
+	chan = s3c64xx_dma_map_channel(channel);
+	if (chan == NULL) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+
+	dbg_showchan(chan);
+
+	chan->client = client;
+	chan->in_use = 1;
+	chan->peripheral = channel;
+
+	local_irq_restore(flags);
+
+	/* need to setup */
+
+	pr_debug("%s: channel initialised, %p\n", __func__, chan);
+
+	return chan->number | DMACH_LOW_LEVEL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	if (chan->client != client) {
+		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+		       channel, chan->client, client);
+	}
+
+	/* sort out stopping and freeing the channel */
+
+
+	chan->client = NULL;
+	chan->in_use = 0;
+
+	if (!(channel & DMACH_LOW_LEVEL))
+		s3c_dma_chan_map[channel] = NULL;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+
+static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
+{
+	struct s3c2410_dma_chan *chan = dmac->channels + offs;
+
+	/* note, we currently do not bother to work out which buffer
+	 * or buffers have been completed since the last tc-irq. */
+
+	if (chan->callback_fn)
+		(chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
+}
+
+static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
+{
+	printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
+}
+
+static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
+{
+	struct s3c64xx_dmac *dmac = pw;
+	u32 tcstat, errstat;
+	u32 bit;
+	int offs;
+
+	tcstat = readl(dmac->regs + PL080_TC_STATUS);
+	errstat = readl(dmac->regs + PL080_ERR_STATUS);
+
+	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+		if (tcstat & bit) {
+			writel(bit, dmac->regs + PL080_TC_CLEAR);
+			s3c64xx_dma_tcirq(dmac, offs);
+		}
+
+		if (errstat & bit) {
+			s3c64xx_dma_errirq(dmac, offs);
+			writel(bit, dmac->regs + PL080_ERR_CLEAR);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct sysdev_class dma_sysclass = {
+	.name		= "s3c64xx-dma",
+};
+
+static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
+			     int irq, unsigned int base)
+{
+	struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
+	struct s3c64xx_dmac *dmac;
+	char clkname[16];
+	void __iomem *regs;
+	void __iomem *regptr;
+	int err, ch;
+
+	dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
+	if (!dmac) {
+		printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
+		return -ENOMEM;
+	}
+
+	dmac->sysdev.id = chno / 8;
+	dmac->sysdev.cls = &dma_sysclass;
+
+	err = sysdev_register(&dmac->sysdev);
+	if (err) {
+		printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
+		goto err_alloc;
+	}
+
+	regs = ioremap(base, 0x200);
+	if (!regs) {
+		printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
+		err = -ENXIO;
+		goto err_dev;
+	}
+
+	snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
+
+	dmac->clk = clk_get(NULL, clkname);
+	if (IS_ERR(dmac->clk)) {
+		printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
+		err = PTR_ERR(dmac->clk);
+		goto err_map;
+	}
+
+	clk_enable(dmac->clk);
+
+	dmac->regs = regs;
+	dmac->chanbase = chbase;
+	dmac->channels = chptr;
+
+	err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
+	if (err < 0) {
+		printk(KERN_ERR "%s: failed to get irq\n", __func__);
+		goto err_clk;
+	}
+
+	regptr = regs + PL080_Cx_BASE(0);
+
+	for (ch = 0; ch < 8; ch++, chno++, chptr++) {
+		printk(KERN_INFO "%s: registering DMA %d (%p)\n",
+		       __func__, chno, regptr);
+
+		chptr->bit = 1 << ch;
+		chptr->number = chno;
+		chptr->dmac = dmac;
+		chptr->regs = regptr;
+		regptr += PL008_Cx_STRIDE;
+	}
+
+	/* for the moment, permanently enable the controller */
+	writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
+
+	printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+
+	return 0;
+
+err_clk:
+	clk_disable(dmac->clk);
+	clk_put(dmac->clk);
+err_map:
+	iounmap(regs);
+err_dev:
+	sysdev_unregister(&dmac->sysdev);
+err_alloc:
+	kfree(dmac);
+	return err;
+}
+
+static int __init s3c64xx_dma_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
+
+	dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+	if (!dma_pool) {
+		printk(KERN_ERR "%s: failed to create pool\n", __func__);
+		return -ENOMEM;
+	}
+
+	ret = sysdev_class_register(&dma_sysclass);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C_SYSREG(0x110));
+
+	/* Register standard DMA controlers */
+	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
+	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
+
+	return 0;
+}
+
+arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index 78ee52cffc9..da7b60ee5e6 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -385,12 +385,19 @@ static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
 {
 	chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
 	chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
 }
 
 static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
 {
 	chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
 	chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
+{
+	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
 }
 
 static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
@@ -412,7 +419,8 @@ static __init int s3c64xx_gpiolib_init(void)
 	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
 			    s3c64xx_gpiolib_add_4bit2);
 
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL);
+	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
+			    s3c64xx_gpiolib_add_2bit);
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
new file mode 100644
index 00000000000..0c30dd98672
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+struct s3c64xx_dma_buff;
+
+/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
+ * @next: Pointer to next buffer in queue or ring.
+ * @pw: Client provided identifier
+ * @lli: Pointer to hardware descriptor this buffer is associated with.
+ * @lli_dma: Hardare address of the descriptor.
+ */
+struct s3c64xx_dma_buff {
+	struct s3c64xx_dma_buff *next;
+
+	void			*pw;
+	struct pl080_lli	*lli;
+	dma_addr_t		 lli_dma;
+};
+
+struct s3c64xx_dmac;
+
+struct s3c2410_dma_chan {
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 bit;	      /* bit for enable/disable/etc */
+	unsigned char		 hw_width;
+	unsigned char		 peripheral;
+
+	unsigned int		 flags;
+	enum s3c2410_dmasrc	 source;
+
+
+	dma_addr_t		dev_addr;
+
+	struct s3c2410_dma_client *client;
+	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
+
+	void __iomem		*regs;
+
+	/* cdriver callbacks */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
+
+	/* buffer list and information */
+	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
+	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
+	struct s3c64xx_dma_buff	*end;		/* end of queue */
+
+	/* note, when channel is running in circular mode, curr is the
+	 * first buffer enqueued, end is the last and curr is where the
+	 * last buffer-done event is set-at. The buffers are not freed
+	 * and the last buffer hardware descriptor points back to the
+	 * first.
+	 */
+};
+
+#include <plat/dma-core.h>
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index f865bf4d709..743a70094d0 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -157,6 +157,7 @@
 
 #define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
 #define IRQ_EINT(x)		S3C_EINT(x)
+#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
 
 /* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
  * that they are sourced from the GPIO pins but with a different scheme for
diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
new file mode 100644
index 00000000000..d347de3ba0d
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
@@ -0,0 +1,98 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+	/* As a note, since the S3C64XX UARTs generally have multiple
+	 * clock sources, we simply enable PCLK at the moment and hope
+	 * that the resume settings for the UART are suitable for the
+	 * use with PCLK.
+	 */
+
+	tmp |= S3C_CLKCON_PCLK_UART0;
+	tmp |= S3C_CLKCON_PCLK_UART1;
+	tmp |= S3C_CLKCON_PCLK_UART2;
+	tmp |= S3C_CLKCON_PCLK_UART3;
+
+	__raw_writel(tmp, S3C_PCLK_GATE);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	/* VIC should have already been taken care of */
+
+	/* clear any pending EINT0 interrupts */
+	__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+
+#define s3c_irqwake_eintallow	((1 << 28) - 1)
+#define s3c_irqwake_intallow	(0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+	u32 ucon = __raw_readl(regs + S3C2410_UCON);
+	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+	u32 new_ucon;
+	u32 delta;
+
+	/* S3C64XX UART blocks only support level interrupts, so ensure that
+	 * when we restore unused UART blocks we force the level interrupt
+	 * settigs. */
+	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+	/* We have a constraint on changing the clock type of the UART
+	 * between UCLKx and PCLK, so ensure that when we restore UCON
+	 * that the CLK field is correctly modified if the bootloader
+	 * has changed anything.
+	 */
+	if (ucon_clk != save_clk) {
+		new_ucon = save->ucon;
+		delta = ucon_clk ^ save_clk;
+
+		/* change from UCLKx => wrong PCLK,
+		 * either UCLK can be tested for by a bit-test
+		 * with UCLK0 */
+		if (ucon_clk & S3C6400_UCON_UCLK0 &&
+		    !(save_clk & S3C6400_UCON_UCLK0) &&
+		    delta & S3C6400_UCON_PCLK2) {
+			new_ucon &= ~S3C6400_UCON_UCLK0;
+		} else if (delta == S3C6400_UCON_PCLK2) {
+			/* as an precaution, don't change from
+			 * PCLK2 => PCLK or vice-versa */
+			new_ucon ^= S3C6400_UCON_PCLK2;
+		}
+
+		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+			  ucon, new_ucon, save->ucon);
+		save->ucon = new_ucon;
+	}
+}
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
index b1082c16324..52836d41e33 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -32,6 +32,7 @@
 #define S3C_HCLK_GATE		S3C_CLKREG(0x30)
 #define S3C_PCLK_GATE		S3C_CLKREG(0x34)
 #define S3C_SCLK_GATE		S3C_CLKREG(0x38)
+#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 
 /* CLKDIV0 */
 #define S3C6400_CLKDIV0_MFC_MASK	(0xf << 28)
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
index 571eaa2e54f..11f2e1e119b 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
@@ -15,12 +15,13 @@
 /* Common init code for S3C6400 related SoCs */
 
 extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(void);
+extern void s3c6400_register_clocks(unsigned armclk_divlimit);
 extern void s3c6400_setup_clocks(void);
 
 #ifdef CONFIG_CPU_S3C6400
 
 extern  int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
 extern void s3c6400_map_io(void);
 extern void s3c6400_init_clocks(int xtal);
 
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index 47e5155bb13..f81b7b818ba 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -14,6 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/sysdev.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
@@ -26,6 +27,7 @@
 
 #include <mach/map.h>
 #include <plat/cpu.h>
+#include <plat/pm.h>
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
 #define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
@@ -134,6 +136,7 @@ static struct irq_chip s3c_irq_eint = {
 	.mask_ack	= s3c_irq_eint_maskack,
 	.ack		= s3c_irq_eint_ack,
 	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
 };
 
 /* s3c_irq_demux_eint
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/plat-s3c64xx/irq-pm.c
new file mode 100644
index 00000000000..ca523b5d4c1
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/irq-pm.c
@@ -0,0 +1,111 @@
+/* arch/arm/plat-s3c64xx/irq-pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling Power Management
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-gpio.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+/* We handled all the IRQ types in this code, to save having to make several
+ * small files to handle each different type separately. Having the EINT_GRP
+ * code here shouldn't be as much bloat as the IRQ table space needed when
+ * they are enabled. The added benefit is we ensure that these registers are
+ * in the same state as we suspended.
+ */
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C64XX_PRIORITY),
+	SAVE_ITEM(S3C64XX_EINT0CON0),
+	SAVE_ITEM(S3C64XX_EINT0CON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON0),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
+	SAVE_ITEM(S3C64XX_EINT0MASK),
+	SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+static struct irq_grp_save {
+	u32	fltcon;
+	u32	con;
+	u32	mask;
+} eint_grp_save[5];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
+		grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
+		grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	return 0;
+}
+
+static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		__raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
+		__raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
+		__raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+	return 0;
+}
+
+static struct sysdev_driver s3c64xx_irq_driver = {
+	.suspend = s3c64xx_irq_pm_suspend,
+	.resume	 = s3c64xx_irq_pm_resume,
+};
+
+static int __init s3c64xx_irq_pm_init(void)
+{
+	return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
+}
+
+arch_initcall(s3c64xx_irq_pm_init);
+
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
index f22edf7c2d2..8dc5b6da978 100644
--- a/arch/arm/plat-s3c64xx/irq.c
+++ b/arch/arm/plat-s3c64xx/irq.c
@@ -14,12 +14,14 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/serial_core.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
 #include <asm/hardware/vic.h>
 
 #include <mach/map.h>
+#include <plat/regs-serial.h>
 #include <plat/regs-timer.h>
 #include <plat/cpu.h>
 
@@ -135,9 +137,6 @@ static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
 }
 
 /* UART interrupt registers, not worth adding to seperate include header */
-#define S3C64XX_UINTP	0x30
-#define S3C64XX_UINTSP	0x34
-#define S3C64XX_UINTM	0x38
 
 static void s3c_irq_uart_mask(unsigned int irq)
 {
@@ -233,8 +232,8 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
 
 	/* initialise the pair of VICs */
-	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid);
-	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid);
+	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
+	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
 
 	/* add the timer sub-irqs */
 
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c
new file mode 100644
index 00000000000..07a6516a4f3
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/pm.c
@@ -0,0 +1,175 @@
+/* linux/arch/arm/plat-s3c64xx/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU PM support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/pm.h>
+#include <plat/regs-sys.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-clock.h>
+#include <plat/regs-syscon-power.h>
+#include <plat/regs-gpio-memport.h>
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+#include <plat/gpio-bank-n.h>
+
+void s3c_pm_debug_smdkled(u32 set, u32 clear)
+{
+	unsigned long flags;
+	u32 reg;
+
+	local_irq_save(flags);
+	reg = __raw_readl(S3C64XX_GPNCON);
+	reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
+		 S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
+	reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
+	       S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
+	__raw_writel(reg, S3C64XX_GPNCON);
+
+	reg = __raw_readl(S3C64XX_GPNDAT);
+	reg &= ~(clear << 12);
+	reg |= set << 12;
+	__raw_writel(reg, S3C64XX_GPNDAT);
+
+	local_irq_restore(flags);
+}
+#endif
+
+static struct sleep_save core_save[] = {
+	SAVE_ITEM(S3C_APLL_LOCK),
+	SAVE_ITEM(S3C_MPLL_LOCK),
+	SAVE_ITEM(S3C_EPLL_LOCK),
+	SAVE_ITEM(S3C_CLK_SRC),
+	SAVE_ITEM(S3C_CLK_DIV0),
+	SAVE_ITEM(S3C_CLK_DIV1),
+	SAVE_ITEM(S3C_CLK_DIV2),
+	SAVE_ITEM(S3C_CLK_OUT),
+	SAVE_ITEM(S3C_HCLK_GATE),
+	SAVE_ITEM(S3C_PCLK_GATE),
+	SAVE_ITEM(S3C_SCLK_GATE),
+	SAVE_ITEM(S3C_MEM0_GATE),
+
+	SAVE_ITEM(S3C_EPLL_CON1),
+	SAVE_ITEM(S3C_EPLL_CON0),
+
+	SAVE_ITEM(S3C64XX_MEM0DRVCON),
+	SAVE_ITEM(S3C64XX_MEM1DRVCON),
+
+#ifndef CONFIG_CPU_FREQ
+	SAVE_ITEM(S3C_APLL_CON),
+	SAVE_ITEM(S3C_MPLL_CON),
+#endif
+};
+
+static struct sleep_save misc_save[] = {
+	SAVE_ITEM(S3C64XX_AHB_CON0),
+	SAVE_ITEM(S3C64XX_AHB_CON1),
+	SAVE_ITEM(S3C64XX_AHB_CON2),
+	
+	SAVE_ITEM(S3C64XX_SPCON),
+
+	SAVE_ITEM(S3C64XX_MEM0CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM1CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
+	SAVE_ITEM(S3C64XX_MEM1CONSLP),
+};
+
+void s3c_pm_configure_extint(void)
+{
+	__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+	__raw_writel(0, S3C64XX_EINT_MASK);
+
+	s3c_pm_debug_smdkled(1 << 2, 0);
+
+	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+
+/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
+ * put the per-cpu code in here until any new cpu comes along and changes
+ * this.
+ */
+
+#include <plat/regs-gpio.h>
+
+static void s3c64xx_cpu_suspend(void)
+{
+	unsigned long tmp;
+
+	/* set our standby method to sleep */
+
+	tmp = __raw_readl(S3C64XX_PWR_CFG);
+	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+	tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S3C64XX_PWR_CFG);
+
+	/* clear any old wakeup */
+
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
+		     S3C64XX_WAKEUP_STAT);
+
+	/* set the LED state to 0110 over sleep */
+	s3c_pm_debug_smdkled(3 << 1, 0xf);
+
+	/* issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case */
+
+	tmp = 0;
+
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+	/* we should never get past here */
+
+	panic("sleep resumed to originator?");
+}
+
+static void s3c64xx_pm_prepare(void)
+{
+	/* store address of resume. */
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
+
+	/* ensure previous wakeup state is cleared before sleeping */
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
+}
+
+static int s3c64xx_pm_init(void)
+{
+	pm_cpu_prep = s3c64xx_pm_prepare;
+	pm_cpu_sleep = s3c64xx_cpu_suspend;
+	pm_uart_udivslot = 1;
+	return 0;
+}
+
+arch_initcall(s3c64xx_pm_init);
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 05b17528041..1debc1f9f98 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -133,6 +133,65 @@ static struct clksrc_clk clk_mout_mpll = {
 	.sources	= &clk_src_mpll,
 };
 
+static unsigned int armclk_mask;
+
+static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+
+	if (parent < rate)
+		return rate;
+
+	div = (parent / rate) - 1;
+	if (div > armclk_mask)
+		div = armclk_mask;
+
+	return parent / (div + 1);
+}
+
+static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
+
+	if (rate < parent / (armclk_mask + 1))
+		return -EINVAL;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+
+	val = __raw_readl(S3C_CLK_DIV0);
+	val &= armclk_mask;
+	val |= (div - 1);
+	__raw_writel(val, S3C_CLK_DIV0);
+
+	return 0;
+
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s3c64xx_clk_arm_get_rate,
+	.set_rate	= s3c64xx_clk_arm_set_rate,
+	.round_rate	= s3c64xx_clk_arm_round_rate,
+};
+
 static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
 {
 	unsigned long rate = clk_get_rate(clk->parent);
@@ -520,6 +579,33 @@ static struct clksrc_clk clk_irda = {
 	.reg_divider	= S3C_CLK_DIV2,
 };
 
+static struct clk *clkset_camif_list[] = {
+	&clk_h2,
+};
+
+static struct clk_sources clkset_camif = {
+	.sources	= clkset_camif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
+};
+
+static struct clksrc_clk clk_camif = {
+	.clk	= {
+		.name		= "camera",
+		.id		= -1,
+		.ctrlbit        = S3C_CLKCON_SCLK_CAM,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= 0,
+	.mask		= 0,
+	.sources	= &clkset_camif,
+	.divider_shift	= S3C6400_CLKDIV0_CAM_SHIFT,
+	.reg_divider	= S3C_CLK_DIV0,
+};
+
 /* Clock initialisation code */
 
 static struct clksrc_clk *init_parents[] = {
@@ -536,6 +622,7 @@ static struct clksrc_clk *init_parents[] = {
 	&clk_audio0,
 	&clk_audio1,
 	&clk_irda,
+	&clk_camif,
 };
 
 static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
@@ -608,6 +695,7 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 	clk_fout_epll.rate = epll;
 	clk_fout_apll.rate = apll;
 
+	clk_h2.rate = hclk2;
 	clk_h.rate = hclk;
 	clk_p.rate = pclk;
 	clk_f.rate = fclk;
@@ -635,14 +723,30 @@ static struct clk *clks[] __initdata = {
 	&clk_audio0.clk,
 	&clk_audio1.clk,
 	&clk_irda.clk,
+	&clk_camif.clk,
+	&clk_arm,
 };
 
-void __init s3c6400_register_clocks(void)
+/**
+ * s3c6400_register_clocks - register clocks for s3c6400 and above
+ * @armclk_divlimit: Divisor mask for ARMCLK
+ *
+ * Register the clocks for the S3C6400 and above SoC range, such
+ * as ARMCLK and the clocks which have divider chains attached.
+ *
+ * This call does not setup the clocks, which is left to the
+ * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * or resume code to re-set the clocks if the bootloader has changed
+ * them.
+ */
+void __init s3c6400_register_clocks(unsigned armclk_divlimit)
 {
 	struct clk *clkp;
 	int ret;
 	int ptr;
 
+	armclk_mask = armclk_divlimit;
+
 	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
 		clkp = clks[ptr];
 		ret = s3c24xx_register_clock(clkp);
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
new file mode 100644
index 00000000000..5417123b0ac
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
@@ -0,0 +1,55 @@
+/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPG(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/plat-s3c64xx/sleep.S
new file mode 100644
index 00000000000..8e71fe90a37
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/sleep.S
@@ -0,0 +1,144 @@
+/* linux/0arch/arm/plat-s3c64xx/sleep.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU sleep code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#undef S3C64XX_VA_GPIO
+#define S3C64XX_VA_GPIO (0x0)
+
+#include <plat/regs-gpio.h>
+#include <plat/gpio-bank-n.h>
+
+#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
+
+	.text
+
+	/* s3c_cpu_save
+	 *
+	 * Save enough processor state to allow the restart of the pm.c
+	 * code after resume.
+	 *
+	 * entry:
+	 *	r0 = pointer to the save block
+	*/
+
+ENTRY(s3c_cpu_save)
+	stmfd	sp!, { r4 - r12, lr }
+
+	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mrc	p15, 0, r9, c1, c0, 0	@ Control register
+	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+
+	stmia	r0, { r4 - r13 }	@ Save CP registers and SP
+
+	@@ save our state to ram
+	bl	s3c_pm_cb_flushcache
+
+	@@ call final suspend code
+	ldr	r0, =pm_cpu_sleep
+	ldr	pc, [r0]
+	
+	@@ return to the caller, after the MMU is turned on.
+	@@ restore the last bits of the stack and return.
+resume_with_mmu:
+	ldmfd	sp!, { r4 - r12, pc }	@ return, from sp from s3c_cpu_save
+
+	.data
+
+	/* the next bit is code, but it requires easy access to the
+	 * s3c_sleep_save_phys data before the MMU is switched on, so
+	 * we store the code that needs this variable in the .data where
+	 * the value can be written to (the .text segment is RO).
+	*/
+
+	.global	s3c_sleep_save_phys
+s3c_sleep_save_phys:
+	.word	0
+
+	/* Sleep magic, the word before the resume entry point so that the
+	 * bootloader can check for a resumeable image. */
+
+	.word	0x2bedf00d
+
+	/* s3c_cpu_reusme
+	 *
+	 * This is the entry point, stored by whatever method the bootloader
+	 * requires to get the kernel runnign again. This code expects to be
+	 * entered with no caches live and the MMU disabled. It will then
+	 * restore the MMU and other basic CP registers saved and restart
+	 * the kernel C code to finish the resume code.
+	*/
+
+ENTRY(s3c_cpu_resume)
+	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	ldr	r2, =LL_UART		/* for debug */
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
+	 * as the uboot version supplied resets these to inputs during the
+	 * resume checks.
+	*/
+
+	ldr	r3, =S3C64XX_PA_GPIO
+	ldr	r0, [ r3, #S3C64XX_GPNCON ]
+	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
+			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
+	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
+			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
+	str	r0, [ r3, #S3C64XX_GPNCON ]
+
+	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
+	bic	r0, r0, #0xf << 12			@ GPN12..15
+	orr	r0, r0, #1 << 15			@ GPN15
+	str	r0, [ r3, #S3C64XX_GPNDAT ]
+#endif
+
+	/* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
+	 * are thoroughly cleaned just in case the bootloader didn't do it
+	 * for us. */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	@@mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
+	@@mcr	p15, 0, r0, c7, c7, 0		@ Invalidate I + D caches
+
+	ldr	r0, s3c_sleep_save_phys
+	ldmia	r0, { r4 - r13 }
+
+	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mcr	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mcr	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mcr	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+
+	mov	r0, #0			@ restore copro access controls
+	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+	mcr 	p15, 0, r0, c7, c5, 4
+
+	ldr	r2, =resume_with_mmu
+	mcr	p15, 0, r9, c1, c0, 0		/* turn mmu back on */
+	nop
+	mov	pc, r2				/* jump back */
+
+	.end
diff --git a/arch/arm/plat-stmp3xxx/Kconfig b/arch/arm/plat-stmp3xxx/Kconfig
new file mode 100644
index 00000000000..2cf37c35951
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/Kconfig
@@ -0,0 +1,37 @@
+if ARCH_STMP3XXX
+
+menu "Freescale STMP3xxx implementations"
+
+choice
+	prompt "Select STMP3xxx chip family"
+
+config ARCH_STMP37XX
+	bool "Freescale SMTP37xx"
+	select CPU_ARM926T
+	---help---
+	 STMP37xx refers to 3700 through 3769 chips
+
+config ARCH_STMP378X
+	bool "Freescale STMP378x"
+	select CPU_ARM926T
+	---help---
+	 STMP378x refers to 3780 through 3789 chips
+
+endchoice
+
+choice
+	prompt "Select STMP3xxx board type"
+
+config MACH_STMP37XX
+	depends on ARCH_STMP37XX
+	bool "Freescale STMP37xx development board"
+
+config MACH_STMP378X
+	depends on ARCH_STMP378X
+	bool "Freescale STMP378x development board"
+
+endchoice
+
+endmenu
+
+endif
diff --git a/arch/arm/plat-stmp3xxx/Makefile b/arch/arm/plat-stmp3xxx/Makefile
new file mode 100644
index 00000000000..31dd518f37a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the linux kernel.
+#
+# Object file lists.
+obj-y += core.o timer.o irq.o dma.o clock.o pinmux.o devices.o
diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c
new file mode 100644
index 00000000000..5d2f19a09e4
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/clock.c
@@ -0,0 +1,1135 @@
+/*
+ * Clock manipulation routines for Freescale STMP37XX/STMP378X
+ *
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define DEBUG
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include <asm/clkdev.h>
+#include <mach/platform.h>
+#include <mach/regs-clkctrl.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static struct clk osc_24M;
+static struct clk pll_clk;
+static struct clk cpu_clk;
+static struct clk hclk;
+
+static int propagate_rate(struct clk *);
+
+static inline int clk_is_busy(struct clk *clk)
+{
+	return __raw_readl(clk->busy_reg) & (1 << clk->busy_bit);
+}
+
+static inline int clk_good(struct clk *clk)
+{
+	return clk && !IS_ERR(clk) && clk->ops;
+}
+
+static int std_clk_enable(struct clk *clk)
+{
+	if (clk->enable_reg) {
+		u32 clk_reg = __raw_readl(clk->enable_reg);
+		if (clk->enable_negate)
+			clk_reg &= ~(1 << clk->enable_shift);
+		else
+			clk_reg |= (1 << clk->enable_shift);
+		__raw_writel(clk_reg, clk->enable_reg);
+		if (clk->enable_wait)
+			udelay(clk->enable_wait);
+		return 0;
+	} else
+		return -EINVAL;
+}
+
+static int std_clk_disable(struct clk *clk)
+{
+	if (clk->enable_reg) {
+		u32 clk_reg = __raw_readl(clk->enable_reg);
+		if (clk->enable_negate)
+			clk_reg |= (1 << clk->enable_shift);
+		else
+			clk_reg &= ~(1 << clk->enable_shift);
+		__raw_writel(clk_reg, clk->enable_reg);
+		return 0;
+	} else
+		return -EINVAL;
+}
+
+static int io_set_rate(struct clk *clk, u32 rate)
+{
+	u32 reg_frac, clkctrl_frac;
+	int i, ret = 0, mask = 0x1f;
+
+	clkctrl_frac = (clk->parent->rate * 18 + rate - 1) / rate;
+
+	if (clkctrl_frac < 18 || clkctrl_frac > 35) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	reg_frac = __raw_readl(clk->scale_reg);
+	reg_frac &= ~(mask << clk->scale_shift);
+	__raw_writel(reg_frac | (clkctrl_frac << clk->scale_shift),
+				clk->scale_reg);
+	if (clk->busy_reg) {
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i)
+			ret = -ETIMEDOUT;
+		else
+			ret = 0;
+	}
+out:
+	return ret;
+}
+
+static long io_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate * 18;
+	int mask = 0x1f;
+
+	rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static long per_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+	long div;
+	const int mask = 0xff;
+
+	if (clk->enable_reg &&
+			!(__raw_readl(clk->enable_reg) & clk->enable_shift))
+		clk->rate = 0;
+	else {
+		div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+		if (div)
+			rate /= div;
+		clk->rate = rate;
+	}
+
+	return clk->rate;
+}
+
+static int per_set_rate(struct clk *clk, u32 rate)
+{
+	int ret = -EINVAL;
+	int div = (clk->parent->rate + rate - 1) / rate;
+	u32 reg_frac;
+	const int mask = 0xff;
+	int try = 10;
+	int i = -1;
+
+	if (div == 0 || div > mask)
+		goto out;
+
+	reg_frac = __raw_readl(clk->scale_reg);
+	reg_frac &= ~(mask << clk->scale_shift);
+
+	while (try--) {
+		__raw_writel(reg_frac | (div << clk->scale_shift),
+				clk->scale_reg);
+
+		if (clk->busy_reg) {
+			for (i = 10000; i; i--)
+				if (!clk_is_busy(clk))
+					break;
+		}
+		if (i)
+			break;
+	}
+
+	if (!i)
+		ret = -ETIMEDOUT;
+	else
+		ret = 0;
+
+out:
+	if (ret != 0)
+		printk(KERN_ERR "%s: error %d\n", __func__, ret);
+	return ret;
+}
+
+static long lcdif_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+	long div;
+	const int mask = 0xff;
+
+	div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+	if (div) {
+		rate /= div;
+		div = (__raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC) &
+			BM_CLKCTRL_FRAC_PIXFRAC) >> BP_CLKCTRL_FRAC_PIXFRAC;
+		rate /= div;
+	}
+	clk->rate = rate;
+
+	return rate;
+}
+
+static int lcdif_set_rate(struct clk *clk, u32 rate)
+{
+	int ret = 0;
+	/*
+	 * On 3700, we can get most timings exact by modifying ref_pix
+	 * and the divider, but keeping the phase timings at 1 (2
+	 * phases per cycle).
+	 *
+	 * ref_pix can be between 480e6*18/35=246.9MHz and 480e6*18/18=480MHz,
+	 * which is between 18/(18*480e6)=2.084ns and 35/(18*480e6)=4.050ns.
+	 *
+	 * ns_cycle >= 2*18e3/(18*480) = 25/6
+	 * ns_cycle <= 2*35e3/(18*480) = 875/108
+	 *
+	 * Multiply the ns_cycle by 'div' to lengthen it until it fits the
+	 * bounds. This is the divider we'll use after ref_pix.
+	 *
+	 * 6 * ns_cycle >= 25 * div
+	 * 108 * ns_cycle <= 875 * div
+	 */
+	u32 ns_cycle = 1000000 / rate;
+	u32 div, reg_val;
+	u32 lowest_result = (u32) -1;
+	u32 lowest_div = 0, lowest_fracdiv = 0;
+
+	for (div = 1; div < 256; ++div) {
+		u32 fracdiv;
+		u32 ps_result;
+		int lower_bound = 6 * ns_cycle >= 25 * div;
+		int upper_bound = 108 * ns_cycle <= 875 * div;
+		if (!lower_bound)
+			break;
+		if (!upper_bound)
+			continue;
+		/*
+		 * Found a matching div. Calculate fractional divider needed,
+		 * rounded up.
+		 */
+		fracdiv = ((clk->parent->rate / 1000 * 18 / 2) *
+				ns_cycle + 1000 * div - 1) /
+				(1000 * div);
+		if (fracdiv < 18 || fracdiv > 35) {
+			ret = -EINVAL;
+			goto out;
+		}
+		/* Calculate the actual cycle time this results in */
+		ps_result = 6250 * div * fracdiv / 27;
+
+		/* Use the fastest result that doesn't break ns_cycle */
+		if (ps_result <= lowest_result) {
+			lowest_result = ps_result;
+			lowest_div = div;
+			lowest_fracdiv = fracdiv;
+		}
+	}
+
+	if (div >= 256 || lowest_result == (u32) -1) {
+		ret = -EINVAL;
+		goto out;
+	}
+	pr_debug("Programming PFD=%u,DIV=%u ref_pix=%uMHz "
+			"PIXCLK=%uMHz cycle=%u.%03uns\n",
+			lowest_fracdiv, lowest_div,
+			480*18/lowest_fracdiv, 480*18/lowest_fracdiv/lowest_div,
+			lowest_result / 1000, lowest_result % 1000);
+
+	/* Program ref_pix phase fractional divider */
+	reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+	reg_val &= ~BM_CLKCTRL_FRAC_PIXFRAC;
+	reg_val |= BF(lowest_fracdiv, CLKCTRL_FRAC_PIXFRAC);
+	__raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+
+	/* Ungate PFD */
+	stmp3xxx_clearl(BM_CLKCTRL_FRAC_CLKGATEPIX,
+			REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+
+	/* Program pix divider */
+	reg_val = __raw_readl(clk->scale_reg);
+	reg_val &= ~(BM_CLKCTRL_PIX_DIV | BM_CLKCTRL_PIX_CLKGATE);
+	reg_val |= BF(lowest_div, CLKCTRL_PIX_DIV);
+	__raw_writel(reg_val, clk->scale_reg);
+
+	/* Wait for divider update */
+	if (clk->busy_reg) {
+		int i;
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+	}
+
+	/* Switch to ref_pix source */
+	reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
+	reg_val &= ~BM_CLKCTRL_CLKSEQ_BYPASS_PIX;
+	__raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
+
+out:
+	return ret;
+}
+
+
+static int cpu_set_rate(struct clk *clk, u32 rate)
+{
+	u32 reg_val;
+
+	if (rate < 24000)
+		return -EINVAL;
+	else if (rate == 24000) {
+		/* switch to the 24M source */
+		clk_set_parent(clk, &osc_24M);
+	} else {
+		int i;
+		u32 clkctrl_cpu = 1;
+		u32 c = clkctrl_cpu;
+		u32 clkctrl_frac = 1;
+		u32 val;
+		for ( ; c < 0x40; c++) {
+			u32 f = (pll_clk.rate*18/c + rate/2) / rate;
+			int s1, s2;
+
+			if (f < 18 || f > 35)
+				continue;
+			s1 = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - rate;
+			s2 = pll_clk.rate*18/c/f - rate;
+			pr_debug("%s: s1 %d, s2 %d\n", __func__, s1, s2);
+			if (abs(s1) > abs(s2)) {
+				clkctrl_cpu = c;
+				clkctrl_frac = f;
+			}
+			if (s2 == 0)
+				break;
+		};
+		pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
+				clkctrl_cpu, clkctrl_frac);
+		if (c == 0x40) {
+			int  d = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu -
+				rate;
+			if (abs(d) > 100 ||
+			    clkctrl_frac < 18 || clkctrl_frac > 35)
+				return -EINVAL;
+		}
+
+		/* 4.6.2 */
+		val = __raw_readl(clk->scale_reg);
+		val &= ~(0x3f << clk->scale_shift);
+		val |= clkctrl_frac;
+		clk_set_parent(clk, &osc_24M);
+		udelay(10);
+		__raw_writel(val, clk->scale_reg);
+		/* ungate */
+		__raw_writel(1<<7, clk->scale_reg + 8);
+		/* write clkctrl_cpu */
+		clk->saved_div = clkctrl_cpu;
+
+		reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+		reg_val &= ~0x3F;
+		reg_val |= clkctrl_cpu;
+		__raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			printk(KERN_ERR "couldn't set up CPU divisor\n");
+			return -ETIMEDOUT;
+		}
+		clk_set_parent(clk, &pll_clk);
+		clk->saved_div = 0;
+		udelay(10);
+	}
+	return 0;
+}
+
+static long cpu_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate * 18;
+
+	rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
+	rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU) & 0x3f;
+	rate = ((rate + 9) / 10) * 10;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static long cpu_round_rate(struct clk *clk, u32 rate)
+{
+	unsigned long r = 0;
+
+	if (rate <= 24000)
+		r = 24000;
+	else {
+		u32 clkctrl_cpu = 1;
+		u32 clkctrl_frac;
+		do {
+			clkctrl_frac =
+				(pll_clk.rate*18 / clkctrl_cpu + rate/2) / rate;
+			if (clkctrl_frac > 35)
+				continue;
+			if (pll_clk.rate*18 / clkctrl_frac / clkctrl_cpu/10 ==
+			    rate / 10)
+				break;
+		} while (pll_clk.rate / 2  >= clkctrl_cpu++ * rate);
+		if (pll_clk.rate / 2 < (clkctrl_cpu - 1) * rate)
+			clkctrl_cpu--;
+		pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
+				clkctrl_cpu, clkctrl_frac);
+		if (clkctrl_frac < 18)
+			clkctrl_frac = 18;
+		if (clkctrl_frac > 35)
+			clkctrl_frac = 35;
+
+		r = pll_clk.rate * 18;
+		r /= clkctrl_frac;
+		r /= clkctrl_cpu;
+		r = 10 * ((r + 9) / 10);
+	}
+	return r;
+}
+
+static long emi_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate * 18;
+
+	rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
+	rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI) & 0x3f;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static int clkseq_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -EINVAL;
+	int shift = 8;
+
+	/* bypass? */
+	if (parent == &osc_24M)
+		shift = 4;
+
+	if (clk->bypass_reg) {
+#ifdef CONFIG_ARCH_STMP378X
+		u32 hbus_val, cpu_val;
+
+		if (clk == &cpu_clk && shift == 4) {
+			hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
+					HW_CLKCTRL_HBUS);
+			cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
+					HW_CLKCTRL_CPU);
+
+			hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
+				      BM_CLKCTRL_HBUS_DIV);
+			clk->saved_div = cpu_val & BM_CLKCTRL_CPU_DIV_CPU;
+			cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
+			cpu_val |= 1;
+
+			if (machine_is_stmp378x()) {
+				__raw_writel(hbus_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+				__raw_writel(cpu_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+				hclk.rate = 0;
+			}
+		} else if (clk == &cpu_clk && shift == 8) {
+			hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
+							HW_CLKCTRL_HBUS);
+			cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
+							HW_CLKCTRL_CPU);
+			hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
+				      BM_CLKCTRL_HBUS_DIV);
+			hbus_val |= 2;
+			cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
+			if (clk->saved_div)
+				cpu_val |= clk->saved_div;
+			else
+				cpu_val |= 2;
+
+			if (machine_is_stmp378x()) {
+				__raw_writel(hbus_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+				__raw_writel(cpu_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+				hclk.rate = 0;
+			}
+		}
+#endif
+		__raw_writel(1 << clk->bypass_shift, clk->bypass_reg + shift);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int hbus_set_rate(struct clk *clk, u32 rate)
+{
+	u8 div = 0;
+	int is_frac = 0;
+	u32 clkctrl_hbus;
+	struct clk *parent = clk->parent;
+
+	pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
+			parent->rate);
+
+	if (rate > parent->rate)
+		return -EINVAL;
+
+	if (((parent->rate + rate/2) / rate) * rate != parent->rate &&
+	    parent->rate / rate < 32) {
+		pr_debug("%s: switching to fractional mode\n", __func__);
+		is_frac = 1;
+	}
+
+	if (is_frac)
+		div = (32 * rate + parent->rate / 2) / parent->rate;
+	else
+		div = (parent->rate + rate - 1) / rate;
+	pr_debug("%s: div calculated is %d\n", __func__, div);
+	if (!div || div > 0x1f)
+		return -EINVAL;
+
+	clk_set_parent(&cpu_clk, &osc_24M);
+	udelay(10);
+	clkctrl_hbus = __raw_readl(clk->scale_reg);
+	clkctrl_hbus &= ~0x3f;
+	clkctrl_hbus |= div;
+	clkctrl_hbus |= (is_frac << 5);
+
+	__raw_writel(clkctrl_hbus, clk->scale_reg);
+	if (clk->busy_reg) {
+		int i;
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			printk(KERN_ERR "couldn't set up CPU divisor\n");
+			return -ETIMEDOUT;
+		}
+	}
+	clk_set_parent(&cpu_clk, &pll_clk);
+	__raw_writel(clkctrl_hbus, clk->scale_reg);
+	udelay(10);
+	return 0;
+}
+
+static long hbus_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+
+	if (__raw_readl(clk->scale_reg) & 0x20) {
+		rate *= __raw_readl(clk->scale_reg) & 0x1f;
+		rate /= 32;
+	} else
+		rate /= __raw_readl(clk->scale_reg) & 0x1f;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static int xbus_set_rate(struct clk *clk, u32 rate)
+{
+	u16 div = 0;
+	u32 clkctrl_xbus;
+
+	pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
+			clk->parent->rate);
+
+	div = (clk->parent->rate + rate - 1) / rate;
+	pr_debug("%s: div calculated is %d\n", __func__, div);
+	if (!div || div > 0x3ff)
+		return -EINVAL;
+
+	clkctrl_xbus = __raw_readl(clk->scale_reg);
+	clkctrl_xbus &= ~0x3ff;
+	clkctrl_xbus |= div;
+	__raw_writel(clkctrl_xbus, clk->scale_reg);
+	if (clk->busy_reg) {
+		int i;
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			printk(KERN_ERR "couldn't set up xbus divisor\n");
+			return -ETIMEDOUT;
+		}
+	}
+	return 0;
+}
+
+static long xbus_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+
+	rate /= __raw_readl(clk->scale_reg) & 0x3ff;
+	clk->rate = rate;
+
+	return rate;
+}
+
+
+/* Clock ops */
+
+static struct clk_ops std_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= per_get_rate,
+	.set_rate	= per_set_rate,
+	.set_parent	= clkseq_set_parent,
+};
+
+static struct clk_ops min_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+};
+
+static struct clk_ops cpu_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= cpu_get_rate,
+	.set_rate	= cpu_set_rate,
+	.round_rate	= cpu_round_rate,
+	.set_parent	= clkseq_set_parent,
+};
+
+static struct clk_ops io_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= io_get_rate,
+	.set_rate	= io_set_rate,
+};
+
+static struct clk_ops hbus_ops = {
+	.get_rate	= hbus_get_rate,
+	.set_rate	= hbus_set_rate,
+};
+
+static struct clk_ops xbus_ops = {
+	.get_rate	= xbus_get_rate,
+	.set_rate	= xbus_set_rate,
+};
+
+static struct clk_ops lcdif_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= lcdif_get_rate,
+	.set_rate	= lcdif_set_rate,
+	.set_parent	= clkseq_set_parent,
+};
+
+static struct clk_ops emi_ops = {
+	.get_rate	= emi_get_rate,
+};
+
+/* List of on-chip clocks */
+
+static struct clk osc_24M = {
+	.flags		= FIXED_RATE | ENABLED,
+	.rate		= 24000,
+};
+
+static struct clk pll_clk = {
+	.parent		= &osc_24M,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
+	.enable_shift	= 16,
+	.enable_wait	= 10,
+	.flags		= FIXED_RATE | ENABLED,
+	.rate		= 480000,
+	.ops		= &min_ops,
+};
+
+static struct clk cpu_clk = {
+	.parent		= &pll_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.scale_shift	= 0,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 7,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU,
+	.busy_bit	= 28,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &cpu_ops,
+};
+
+static struct clk io_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.scale_shift	= 24,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &io_ops,
+};
+
+static struct clk hclk = {
+	.parent		= &cpu_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 7,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
+	.busy_bit	= 29,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &hbus_ops,
+};
+
+static struct clk xclk = {
+	.parent		= &osc_24M,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
+	.busy_bit	= 31,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &xbus_ops,
+};
+
+static struct clk uart_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.flags		= ENABLED,
+	.ops		= &min_ops,
+};
+
+static struct clk audio_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 30,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk pwm_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 29,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk dri_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 28,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk digctl_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 27,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk timer_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 26,
+	.enable_negate	= 1,
+	.flags		= ENABLED,
+	.ops		= &min_ops,
+};
+
+static struct clk lcdif_clk = {
+	.parent		= &pll_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 1,
+	.flags		= NEEDS_SET_PARENT,
+	.ops		= &lcdif_ops,
+};
+
+static struct clk ssp_clk = {
+	.parent		= &io_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+	.enable_shift	= 31,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 5,
+	.enable_negate	= 1,
+	.flags		= NEEDS_SET_PARENT,
+	.ops		= &std_ops,
+};
+
+static struct clk gpmi_clk = {
+	.parent		= &io_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 4,
+	.flags		= NEEDS_SET_PARENT,
+	.ops		= &std_ops,
+};
+
+static struct clk spdif_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SPDIF,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk emi_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.scale_shift	= 8,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
+	.busy_bit	= 28,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 6,
+	.flags		= ENABLED,
+	.ops		= &emi_ops,
+};
+
+static struct clk ir_clk = {
+	.parent		= &io_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_IR,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 3,
+	.ops		= &min_ops,
+};
+
+static struct clk saif_clk = {
+	.parent		= &pll_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 0,
+	.ops		= &std_ops,
+};
+
+static struct clk usb_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
+	.enable_shift	= 18,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+/* list of all the clocks */
+static struct clk_lookup onchip_clks[] = {
+	{
+		.con_id = "osc_24M",
+		.clk = &osc_24M,
+	}, {
+		.con_id = "pll",
+		.clk = &pll_clk,
+	}, {
+		.con_id = "cpu",
+		.clk = &cpu_clk,
+	}, {
+		.con_id = "hclk",
+		.clk = &hclk,
+	}, {
+		.con_id = "xclk",
+		.clk = &xclk,
+	}, {
+		.con_id = "io",
+		.clk = &io_clk,
+	}, {
+		.con_id = "uart",
+		.clk = &uart_clk,
+	}, {
+		.con_id = "audio",
+		.clk = &audio_clk,
+	}, {
+		.con_id = "pwm",
+		.clk = &pwm_clk,
+	}, {
+		.con_id = "dri",
+		.clk = &dri_clk,
+	}, {
+		.con_id = "digctl",
+		.clk = &digctl_clk,
+	}, {
+		.con_id = "timer",
+		.clk = &timer_clk,
+	}, {
+		.con_id = "lcdif",
+		.clk = &lcdif_clk,
+	}, {
+		.con_id = "ssp",
+		.clk = &ssp_clk,
+	}, {
+		.con_id = "gpmi",
+		.clk = &gpmi_clk,
+	}, {
+		.con_id = "spdif",
+		.clk = &spdif_clk,
+	}, {
+		.con_id = "emi",
+		.clk = &emi_clk,
+	}, {
+		.con_id = "ir",
+		.clk = &ir_clk,
+	}, {
+		.con_id = "saif",
+		.clk = &saif_clk,
+	}, {
+		.con_id = "usb",
+		.clk = &usb_clk,
+	},
+};
+
+static int __init propagate_rate(struct clk *clk)
+{
+	struct clk_lookup *cl;
+
+	for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
+	     cl++) {
+		if (unlikely(!clk_good(cl->clk)))
+			continue;
+		if (cl->clk->parent == clk && cl->clk->ops->get_rate) {
+			cl->clk->ops->get_rate(cl->clk);
+			if (cl->clk->flags & RATE_PROPAGATES)
+				propagate_rate(cl->clk);
+		}
+	}
+
+	return 0;
+}
+
+/* Exported API */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->ops->get_rate != NULL)
+		return clk->ops->get_rate(clk);
+
+	return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (unlikely(!clk_good(clk)))
+		return 0;
+
+	if (clk->ops->round_rate)
+		return clk->ops->round_rate(clk, rate);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+static inline int close_enough(long rate1, long rate2)
+{
+	return rate1 && !((rate2 - rate1) * 1000 / rate1);
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	if (unlikely(!clk_good(clk)))
+		goto out;
+
+	if (clk->flags & FIXED_RATE || !clk->ops->set_rate)
+		goto out;
+
+	else if (!close_enough(clk->rate, rate)) {
+		ret = clk->ops->set_rate(clk, rate);
+		if (ret < 0)
+			goto out;
+		clk->rate = rate;
+		if (clk->flags & RATE_PROPAGATES)
+			propagate_rate(clk);
+	} else
+		ret = 0;
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long clocks_flags;
+
+	if (unlikely(!clk_good(clk)))
+		return -EINVAL;
+
+	if (clk->parent)
+		clk_enable(clk->parent);
+
+	spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+	clk->usage++;
+	if (clk->ops && clk->ops->enable)
+		clk->ops->enable(clk);
+
+	spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void local_clk_disable(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return;
+
+	if (clk->usage == 0 && clk->ops->disable)
+		clk->ops->disable(clk);
+
+	if (clk->parent)
+		local_clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long clocks_flags;
+
+	if (unlikely(!clk_good(clk)))
+		return;
+
+	spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+	if ((--clk->usage) == 0 && clk->ops->disable)
+		clk->ops->disable(clk);
+
+	spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+	if (clk->parent)
+		clk_disable(clk->parent);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Some additional API */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -ENODEV;
+	unsigned long clocks_flags;
+
+	if (unlikely(!clk_good(clk)))
+		goto out;
+
+	if (!clk->ops->set_parent)
+		goto out;
+
+	spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+	ret = clk->ops->set_parent(clk, parent);
+	if (!ret) {
+		/* disable if usage count is 0 */
+		local_clk_disable(parent);
+
+		parent->usage += clk->usage;
+		clk->parent->usage -= clk->usage;
+
+		/* disable if new usage count is 0 */
+		local_clk_disable(clk->parent);
+
+		clk->parent = parent;
+	}
+	spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return NULL;
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+static int __init clk_init(void)
+{
+	struct clk_lookup *cl;
+	struct clk_ops *ops;
+
+	spin_lock_init(&clocks_lock);
+
+	for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
+	     cl++) {
+		if (cl->clk->flags & ENABLED)
+			clk_enable(cl->clk);
+		else
+			local_clk_disable(cl->clk);
+
+		ops = cl->clk->ops;
+
+		if ((cl->clk->flags & NEEDS_INITIALIZATION) &&
+				ops && ops->set_rate)
+			ops->set_rate(cl->clk, cl->clk->rate);
+
+		if (cl->clk->flags & FIXED_RATE) {
+			if (cl->clk->flags & RATE_PROPAGATES)
+				propagate_rate(cl->clk);
+		} else {
+			if (ops && ops->get_rate)
+				ops->get_rate(cl->clk);
+		}
+
+		if (cl->clk->flags & NEEDS_SET_PARENT) {
+			if (ops && ops->set_parent)
+				ops->set_parent(cl->clk, cl->clk->parent);
+		}
+
+		clkdev_add(cl);
+	}
+	return 0;
+}
+
+arch_initcall(clk_init);
diff --git a/arch/arm/plat-stmp3xxx/clock.h b/arch/arm/plat-stmp3xxx/clock.h
new file mode 100644
index 00000000000..a6611e1a351
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/clock.h
@@ -0,0 +1,61 @@
+/*
+ * Clock control driver for Freescale STMP37XX/STMP378X - internal header file
+ *
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ARCH_ARM_STMX3XXX_CLOCK_H__
+#define __ARCH_ARM_STMX3XXX_CLOCK_H__
+
+#ifndef __ASSEMBLER__
+
+struct clk_ops {
+	int (*enable) (struct clk *);
+	int (*disable) (struct clk *);
+	long (*get_rate) (struct clk *);
+	long (*round_rate) (struct clk *, u32);
+	int (*set_rate) (struct clk *, u32);
+	int (*set_parent) (struct clk *, struct clk *);
+};
+
+struct clk {
+	struct clk *parent;
+	u32 rate;
+	u32 flags;
+	u8 scale_shift;
+	u8 enable_shift;
+	u8 bypass_shift;
+	u8 busy_bit;
+	s8 usage;
+	int enable_wait;
+	int enable_negate;
+	u32 saved_div;
+	void __iomem *enable_reg;
+	void __iomem *scale_reg;
+	void __iomem *bypass_reg;
+	void __iomem *busy_reg;
+	struct clk_ops *ops;
+};
+
+#endif /* __ASSEMBLER__ */
+
+/* Flags */
+#define RATE_PROPAGATES      (1<<0)
+#define NEEDS_INITIALIZATION (1<<1)
+#define PARENT_SET_RATE      (1<<2)
+#define FIXED_RATE           (1<<3)
+#define ENABLED	             (1<<4)
+#define NEEDS_SET_PARENT     (1<<5)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/core.c b/arch/arm/plat-stmp3xxx/core.c
new file mode 100644
index 00000000000..37b8a09148a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/core.c
@@ -0,0 +1,128 @@
+/*
+ * Freescale STMP37XX/STMP378X core routines
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/dma.h>
+#include <mach/regs-clkctrl.h>
+
+static int __stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
+{
+	u32 c;
+	int timeout;
+
+	/* the process of software reset of IP block is done
+	   in several steps:
+
+	   - clear SFTRST and wait for block is enabled;
+	   - clear clock gating (CLKGATE bit);
+	   - set the SFTRST again and wait for block is in reset;
+	   - clear SFTRST and wait for reset completion.
+	*/
+	c = __raw_readl(hwreg);
+	c &= ~(1<<31);		/* clear SFTRST */
+	__raw_writel(c, hwreg);
+	for (timeout = 1000000; timeout > 0; timeout--)
+		/* still in SFTRST state ? */
+		if ((__raw_readl(hwreg) & (1<<31)) == 0)
+			break;
+	if (timeout <= 0) {
+		printk(KERN_ERR"%s(%p): timeout when enabling\n",
+				__func__, hwreg);
+		return -ETIME;
+	}
+
+	c = __raw_readl(hwreg);
+	c &= ~(1<<30);		/* clear CLKGATE */
+	__raw_writel(c, hwreg);
+
+	if (!just_enable) {
+		c = __raw_readl(hwreg);
+		c |= (1<<31);		/* now again set SFTRST */
+		__raw_writel(c, hwreg);
+		for (timeout = 1000000; timeout > 0; timeout--)
+			/* poll until CLKGATE set */
+			if (__raw_readl(hwreg) & (1<<30))
+				break;
+		if (timeout <= 0) {
+			printk(KERN_ERR"%s(%p): timeout when resetting\n",
+					__func__, hwreg);
+			return -ETIME;
+		}
+
+		c = __raw_readl(hwreg);
+		c &= ~(1<<31);		/* clear SFTRST */
+		__raw_writel(c, hwreg);
+		for (timeout = 1000000; timeout > 0; timeout--)
+			/* still in SFTRST state ? */
+			if ((__raw_readl(hwreg) & (1<<31)) == 0)
+				break;
+		if (timeout <= 0) {
+			printk(KERN_ERR"%s(%p): timeout when enabling "
+					"after reset\n", __func__, hwreg);
+			return -ETIME;
+		}
+
+		c = __raw_readl(hwreg);
+		c &= ~(1<<30);		/* clear CLKGATE */
+		__raw_writel(c, hwreg);
+	}
+	for (timeout = 1000000; timeout > 0; timeout--)
+		/* still in SFTRST state ? */
+		if ((__raw_readl(hwreg) & (1<<30)) == 0)
+			break;
+
+	if (timeout <= 0) {
+		printk(KERN_ERR"%s(%p): timeout when unclockgating\n",
+				__func__, hwreg);
+		return -ETIME;
+	}
+
+	return 0;
+}
+
+int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
+{
+	int try = 10;
+	int r;
+
+	while (try--) {
+		r = __stmp3xxx_reset_block(hwreg, just_enable);
+		if (!r)
+			break;
+		pr_debug("%s: try %d failed\n", __func__, 10 - try);
+	}
+	return r;
+}
+EXPORT_SYMBOL(stmp3xxx_reset_block);
+
+struct platform_device stmp3xxx_dbguart = {
+	.name = "stmp3xxx-dbguart",
+	.id = -1,
+};
+
+void __init stmp3xxx_init(void)
+{
+	/* Turn off auto-slow and other tricks */
+	stmp3xxx_clearl(0x7f00000, REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+
+	stmp3xxx_dma_init();
+}
diff --git a/arch/arm/plat-stmp3xxx/devices.c b/arch/arm/plat-stmp3xxx/devices.c
new file mode 100644
index 00000000000..68fed4b8746
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/devices.c
@@ -0,0 +1,389 @@
+/*
+* Freescale STMP37XX/STMP378X platform devices
+*
+* Embedded Alley Solutions, Inc <source@embeddedalley.com>
+*
+* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+*/
+
+/*
+* The code contained herein is licensed under the GNU General Public
+* License. You may obtain a copy of the GNU General Public License
+* Version 2 or later at the following locations:
+*
+* http://www.opensource.org/licenses/gpl-license.html
+* http://www.gnu.org/copyleft/gpl.html
+*/
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/regs-lcdif.h>
+#include <mach/regs-uartapp.h>
+#include <mach/regs-gpmi.h>
+#include <mach/regs-usbctrl.h>
+#include <mach/regs-ssp.h>
+#include <mach/regs-rtc.h>
+
+static u64 common_dmamask = DMA_BIT_MASK(32);
+
+static struct resource appuart_resources[] = {
+	{
+		.start = IRQ_UARTAPP_INTERNAL,
+		.end = IRQ_UARTAPP_INTERNAL,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_UARTAPP_RX_DMA,
+		.end = IRQ_UARTAPP_RX_DMA,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_UARTAPP_TX_DMA,
+		.end = IRQ_UARTAPP_TX_DMA,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = REGS_UARTAPP1_PHYS,
+		.end = REGS_UARTAPP1_PHYS + REGS_UARTAPP_SIZE,
+		.flags = IORESOURCE_MEM,
+	}, {
+		/* Rx DMA channel */
+		.start = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
+		.end = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
+		.flags = IORESOURCE_DMA,
+	}, {
+		/* Tx DMA channel */
+		.start = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
+		.end = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device stmp3xxx_appuart = {
+	.name = "stmp3xxx-appuart",
+	.id = 0,
+	.resource = appuart_resources,
+	.num_resources = ARRAY_SIZE(appuart_resources),
+	.dev = {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+struct platform_device stmp3xxx_watchdog = {
+      .name   = "stmp3xxx_wdt",
+      .id     = -1,
+};
+
+static struct resource ts_resource[] = {
+	{
+		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_TOUCH_DETECT,
+		.end    = IRQ_TOUCH_DETECT,
+	}, {
+		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_LRADC_CH5,
+		.end    = IRQ_LRADC_CH5,
+	},
+};
+
+struct platform_device stmp3xxx_touchscreen = {
+	.name		= "stmp3xxx_ts",
+	.id		= -1,
+	.resource	= ts_resource,
+	.num_resources	= ARRAY_SIZE(ts_resource),
+};
+
+/*
+* Keypad device
+*/
+struct platform_device stmp3xxx_keyboard = {
+	.name		= "stmp3xxx-keyboard",
+	.id		= -1,
+};
+
+static struct resource gpmi_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+		.start = REGS_GPMI_PHYS,
+		.end = REGS_GPMI_PHYS + REGS_GPMI_SIZE,
+	}, {
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_GPMI_DMA,
+		.end = IRQ_GPMI_DMA,
+	}, {
+		.flags = IORESOURCE_DMA,
+		.start = STMP3XXX_DMA(4, STMP3XXX_BUS_APBH),
+		.end = STMP3XXX_DMA(8, STMP3XXX_BUS_APBH),
+	},
+};
+
+struct platform_device stmp3xxx_gpmi = {
+	.name = "gpmi",
+	.id = -1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = gpmi_resources,
+	.num_resources = ARRAY_SIZE(gpmi_resources),
+};
+
+static struct resource mmc1_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= REGS_SSP1_PHYS,
+		.end	= REGS_SSP1_PHYS + REGS_SSP_SIZE,
+	}, {
+		.flags	= IORESOURCE_DMA,
+		.start	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+		.end	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_SSP1_DMA,
+		.end	= IRQ_SSP1_DMA,
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_SSP_ERROR,
+		.end	= IRQ_SSP_ERROR,
+	},
+};
+
+struct platform_device stmp3xxx_mmc = {
+	.name	= "stmp3xxx-mmc",
+	.id	= 1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = mmc1_resource,
+	.num_resources = ARRAY_SIZE(mmc1_resource),
+};
+
+static struct resource usb_resources[] = {
+	{
+		.start	= REGS_USBCTRL_PHYS,
+		.end	= REGS_USBCTRL_PHYS + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_USB_CTRL,
+		.end	= IRQ_USB_CTRL,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device stmp3xxx_udc = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource = usb_resources,
+	.num_resources = ARRAY_SIZE(usb_resources),
+};
+
+struct platform_device stmp3xxx_ehci = {
+	.name		= "fsl-ehci",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= usb_resources,
+	.num_resources	= ARRAY_SIZE(usb_resources),
+};
+
+static struct resource rtc_resources[] = {
+	{
+		.start	= REGS_RTC_PHYS,
+		.end	= REGS_RTC_PHYS + REGS_RTC_SIZE,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_RTC_ALARM,
+		.end	= IRQ_RTC_ALARM,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= IRQ_RTC_1MSEC,
+		.end	= IRQ_RTC_1MSEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device stmp3xxx_rtc = {
+	.name		= "stmp3xxx-rtc",
+	.id		= -1,
+	.resource	= rtc_resources,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+};
+
+static struct resource ssp1_resources[] = {
+	{
+		.start	= REGS_SSP1_PHYS,
+		.end	= REGS_SSP1_PHYS + REGS_SSP_SIZE,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_SSP1_DMA,
+		.end	= IRQ_SSP1_DMA,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+		.end	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource ssp2_resources[] = {
+	{
+		.start	= REGS_SSP2_PHYS,
+		.end	= REGS_SSP2_PHYS + REGS_SSP_SIZE,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_SSP2_DMA,
+		.end	= IRQ_SSP2_DMA,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
+		.end	= STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device stmp3xxx_spi1 = {
+	.name	= "stmp3xxx_ssp",
+	.id	= 1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = ssp1_resources,
+	.num_resources = ARRAY_SIZE(ssp1_resources),
+};
+
+struct platform_device stmp3xxx_spi2 = {
+	.name	= "stmp3xxx_ssp",
+	.id	= 2,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = ssp2_resources,
+	.num_resources = ARRAY_SIZE(ssp2_resources),
+};
+
+static struct resource fb_resource[] = {
+	{
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_LCDIF_DMA,
+		.end	= IRQ_LCDIF_DMA,
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_LCDIF_ERROR,
+		.end	= IRQ_LCDIF_ERROR,
+	}, {
+		.flags	= IORESOURCE_MEM,
+		.start	= REGS_LCDIF_PHYS,
+		.end	= REGS_LCDIF_PHYS + REGS_LCDIF_SIZE,
+	},
+};
+
+struct platform_device stmp3xxx_framebuffer = {
+	.name		= "stmp3xxx-fb",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(fb_resource),
+	.resource	= fb_resource,
+};
+
+#define CMDLINE_DEVICE_CHOOSE(name, dev1, dev2)			\
+	static char *cmdline_device_##name;			\
+	static int cmdline_device_##name##_setup(char *dev)	\
+	{							\
+		cmdline_device_##name = dev + 1;		\
+		return 0;					\
+	}							\
+	__setup(#name, cmdline_device_##name##_setup);		\
+	int stmp3xxx_##name##_device_register(void)		\
+	{							\
+		struct platform_device *d = NULL;		\
+		if (!cmdline_device_##name ||			\
+			!strcmp(cmdline_device_##name, #dev1))	\
+				d = &stmp3xxx_##dev1;		\
+		else if (!strcmp(cmdline_device_##name, #dev2))	\
+				d = &stmp3xxx_##dev2;		\
+		else						\
+			printk(KERN_ERR"Unknown %s assignment '%s'.\n",	\
+				#name, cmdline_device_##name);	\
+		return d ? platform_device_register(d) : -ENOENT;	\
+	}
+
+CMDLINE_DEVICE_CHOOSE(ssp1, mmc, spi1)
+CMDLINE_DEVICE_CHOOSE(ssp2, gpmi, spi2)
+
+struct platform_device stmp3xxx_backlight = {
+	.name		= "stmp3xxx-bl",
+	.id		= -1,
+};
+
+struct platform_device stmp3xxx_rotdec = {
+	.name	= "stmp3xxx-rotdec",
+	.id	= -1,
+};
+
+struct platform_device stmp3xxx_persistent = {
+	.name			= "stmp3xxx-persistent",
+	.id			= -1,
+};
+
+struct platform_device stmp3xxx_dcp_bootstream = {
+	.name			= "stmp3xxx-dcpboot",
+	.id			= -1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource dcp_resources[] = {
+	{
+		.start = IRQ_DCP_VMI,
+		.end = IRQ_DCP_VMI,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DCP,
+		.end = IRQ_DCP,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device stmp3xxx_dcp = {
+	.name			= "stmp3xxx-dcp",
+	.id			= -1,
+	.resource		= dcp_resources,
+	.num_resources		= ARRAY_SIZE(dcp_resources),
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource battery_resource[] = {
+	{
+		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_VDD5V,
+		.end    = IRQ_VDD5V,
+	},
+};
+
+struct platform_device stmp3xxx_battery = {
+	.name   = "stmp3xxx-battery",
+	.resource = battery_resource,
+	.num_resources = ARRAY_SIZE(battery_resource),
+};
diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c
new file mode 100644
index 00000000000..d2f497764dc
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/dma.c
@@ -0,0 +1,463 @@
+/*
+ * DMA helper routines for Freescale STMP37XX/STMP378X
+ *
+ * Author: dmitry pervushin <dpervushin@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/cpufreq.h>
+
+#include <asm/page.h>
+
+#include <mach/platform.h>
+#include <mach/dma.h>
+#include <mach/regs-apbx.h>
+#include <mach/regs-apbh.h>
+
+static const size_t pool_item_size = sizeof(struct stmp3xxx_dma_command);
+static const size_t pool_alignment = 8;
+static struct stmp3xxx_dma_user {
+	void *pool;
+	int inuse;
+	const char *name;
+} channels[MAX_DMA_CHANNELS];
+
+#define IS_VALID_CHANNEL(ch) ((ch) >= 0 && (ch) < MAX_DMA_CHANNELS)
+#define IS_USED(ch) (channels[ch].inuse)
+
+int stmp3xxx_dma_request(int ch, struct device *dev, const char *name)
+{
+	struct stmp3xxx_dma_user *user;
+	int err = 0;
+
+	user = channels + ch;
+	if (!IS_VALID_CHANNEL(ch)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (IS_USED(ch)) {
+		err = -EBUSY;
+		goto out;
+	}
+	/* Create a pool to allocate dma commands from */
+	user->pool = dma_pool_create(name, dev, pool_item_size,
+				     pool_alignment, PAGE_SIZE);
+	if (user->pool == NULL) {
+		err = -ENOMEM;
+		goto out;
+	}
+	user->name = name;
+	user->inuse++;
+out:
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_request);
+
+int stmp3xxx_dma_release(int ch)
+{
+	struct stmp3xxx_dma_user *user = channels + ch;
+	int err = 0;
+
+	if (!IS_VALID_CHANNEL(ch)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (!IS_USED(ch)) {
+		err = -EBUSY;
+		goto out;
+	}
+	BUG_ON(user->pool == NULL);
+	dma_pool_destroy(user->pool);
+	user->inuse--;
+out:
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_release);
+
+int stmp3xxx_dma_read_semaphore(int channel)
+{
+	int sem = -1;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		sem = __raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
+				STMP3XXX_DMA_CHANNEL(channel) * 0x70);
+		sem &= BM_APBH_CHn_SEMA_PHORE;
+		sem >>= BP_APBH_CHn_SEMA_PHORE;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		sem = __raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
+				STMP3XXX_DMA_CHANNEL(channel) * 0x70);
+		sem &= BM_APBX_CHn_SEMA_PHORE;
+		sem >>= BP_APBX_CHn_SEMA_PHORE;
+		break;
+	default:
+		BUG();
+	}
+	return sem;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_read_semaphore);
+
+int stmp3xxx_dma_allocate_command(int channel,
+				  struct stmp3xxx_dma_descriptor *descriptor)
+{
+	struct stmp3xxx_dma_user *user = channels + channel;
+	int err = 0;
+
+	if (!IS_VALID_CHANNEL(channel)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (!IS_USED(channel)) {
+		err = -EBUSY;
+		goto out;
+	}
+	if (descriptor == NULL) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	/* Allocate memory for a command from the buffer */
+	descriptor->command =
+	    dma_pool_alloc(user->pool, GFP_KERNEL, &descriptor->handle);
+
+	/* Check it worked */
+	if (!descriptor->command) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	memset(descriptor->command, 0, pool_item_size);
+out:
+	WARN_ON(err);
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_allocate_command);
+
+int stmp3xxx_dma_free_command(int channel,
+			      struct stmp3xxx_dma_descriptor *descriptor)
+{
+	int err = 0;
+
+	if (!IS_VALID_CHANNEL(channel)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (!IS_USED(channel)) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	/* Return the command memory to the pool */
+	dma_pool_free(channels[channel].pool, descriptor->command,
+		      descriptor->handle);
+
+	/* Initialise descriptor so we're not tempted to use it */
+	descriptor->command = NULL;
+	descriptor->handle = 0;
+	descriptor->virtual_buf_ptr = NULL;
+	descriptor->next_descr = NULL;
+
+	WARN_ON(err);
+out:
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_free_command);
+
+void stmp3xxx_dma_go(int channel,
+		     struct stmp3xxx_dma_descriptor *head, u32 semaphore)
+{
+	int ch = STMP3XXX_DMA_CHANNEL(channel);
+	void __iomem *c, *s;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c = REGS_APBH_BASE + HW_APBH_CHn_NXTCMDAR + 0x70 * ch;
+		s = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * ch;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		c = REGS_APBX_BASE + HW_APBX_CHn_NXTCMDAR + 0x70 * ch;
+		s = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * ch;
+		break;
+
+	default:
+		return;
+	}
+
+	/* Set next command */
+	__raw_writel(head->handle, c);
+	/* Set counting semaphore (kicks off transfer). Assumes
+	   peripheral has been set up correctly */
+	__raw_writel(semaphore, s);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_go);
+
+int stmp3xxx_dma_running(int channel)
+{
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		return (__raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
+			0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
+			    BM_APBH_CHn_SEMA_PHORE;
+
+	case STMP3XXX_BUS_APBX:
+		return (__raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
+			0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
+			    BM_APBX_CHn_SEMA_PHORE;
+	default:
+		BUG();
+		return 0;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_dma_running);
+
+/*
+ * Circular dma chain management
+ */
+void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain)
+{
+	int i;
+
+	for (i = 0; i < chain->total_count; i++)
+		stmp3xxx_dma_free_command(
+			STMP3XXX_DMA(chain->channel, chain->bus),
+			&chain->chain[i]);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_free_chain);
+
+int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
+			    struct stmp3xxx_dma_descriptor descriptors[],
+			    unsigned items)
+{
+	int i;
+	int err = 0;
+
+	if (items == 0)
+		return err;
+
+	for (i = 0; i < items; i++) {
+		err = stmp3xxx_dma_allocate_command(ch, &descriptors[i]);
+		if (err) {
+			WARN_ON(err);
+			/*
+			 * Couldn't allocate the whole chain.
+			 * deallocate what has been allocated
+			 */
+			if (i) {
+				do {
+					stmp3xxx_dma_free_command(ch,
+								  &descriptors
+								  [i]);
+				} while (i-- >= 0);
+			}
+			return err;
+		}
+
+		/* link them! */
+		if (i > 0) {
+			descriptors[i - 1].next_descr = &descriptors[i];
+			descriptors[i - 1].command->next =
+						descriptors[i].handle;
+		}
+	}
+
+	/* make list circular */
+	descriptors[items - 1].next_descr = &descriptors[0];
+	descriptors[items - 1].command->next = descriptors[0].handle;
+
+	chain->total_count = items;
+	chain->chain = descriptors;
+	chain->free_index = 0;
+	chain->active_index = 0;
+	chain->cooked_index = 0;
+	chain->free_count = items;
+	chain->active_count = 0;
+	chain->cooked_count = 0;
+	chain->bus = STMP3XXX_DMA_BUS(ch);
+	chain->channel = STMP3XXX_DMA_CHANNEL(ch);
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_make_chain);
+
+void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain)
+{
+	BUG_ON(stmp3xxx_dma_running(STMP3XXX_DMA(chain->channel, chain->bus)));
+	chain->free_index = 0;
+	chain->active_index = 0;
+	chain->cooked_index = 0;
+	chain->free_count = chain->total_count;
+	chain->active_count = 0;
+	chain->cooked_count = 0;
+}
+EXPORT_SYMBOL(stmp37xx_circ_clear_chain);
+
+void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count)
+{
+	BUG_ON(chain->cooked_count < count);
+
+	chain->cooked_count -= count;
+	chain->cooked_index += count;
+	chain->cooked_index %= chain->total_count;
+	chain->free_count += count;
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_free);
+
+void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count)
+{
+	void __iomem *c;
+	u32 mask_clr, mask;
+	BUG_ON(chain->free_count < count);
+
+	chain->free_count -= count;
+	chain->free_index += count;
+	chain->free_index %= chain->total_count;
+	chain->active_count += count;
+
+	switch (chain->bus) {
+	case STMP3XXX_BUS_APBH:
+		c = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * chain->channel;
+		mask_clr = BM_APBH_CHn_SEMA_INCREMENT_SEMA;
+		mask = BF(count, APBH_CHn_SEMA_INCREMENT_SEMA);
+		break;
+	case STMP3XXX_BUS_APBX:
+		c = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * chain->channel;
+		mask_clr = BM_APBX_CHn_SEMA_INCREMENT_SEMA;
+		mask = BF(count, APBX_CHn_SEMA_INCREMENT_SEMA);
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	/* Set counting semaphore (kicks off transfer). Assumes
+	   peripheral has been set up correctly */
+	stmp3xxx_clearl(mask_clr, c);
+	stmp3xxx_setl(mask, c);
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_active);
+
+unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain)
+{
+	unsigned cooked;
+
+	cooked = chain->active_count -
+	  stmp3xxx_dma_read_semaphore(STMP3XXX_DMA(chain->channel, chain->bus));
+
+	chain->active_count -= cooked;
+	chain->active_index += cooked;
+	chain->active_index %= chain->total_count;
+
+	chain->cooked_count += cooked;
+
+	return cooked;
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_cooked);
+
+void stmp3xxx_dma_set_alt_target(int channel, int function)
+{
+#if defined(CONFIG_ARCH_STMP37XX)
+	unsigned bits = 4;
+#elif defined(CONFIG_ARCH_STMP378X)
+	unsigned bits = 2;
+#else
+#error wrong arch
+#endif
+	int shift = STMP3XXX_DMA_CHANNEL(channel) * bits;
+	unsigned mask = (1<<bits) - 1;
+	void __iomem *c;
+
+	BUG_ON(function < 0 || function >= (1<<bits));
+	pr_debug("%s: channel = %d, using mask %x, "
+		 "shift = %d\n", __func__, channel, mask, shift);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c = REGS_APBH_BASE + HW_APBH_DEVSEL;
+		break;
+	case STMP3XXX_BUS_APBX:
+		c = REGS_APBX_BASE + HW_APBX_DEVSEL;
+		break;
+	default:
+		BUG();
+	}
+	stmp3xxx_clearl(mask << shift, c);
+	stmp3xxx_setl(mask << shift, c);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_set_alt_target);
+
+void stmp3xxx_dma_suspend(void)
+{
+	stmp3xxx_setl(BM_APBH_CTRL0_CLKGATE, REGS_APBH_BASE + HW_APBH_CTRL0);
+	stmp3xxx_setl(BM_APBX_CTRL0_CLKGATE, REGS_APBX_BASE + HW_APBX_CTRL0);
+}
+
+void stmp3xxx_dma_resume(void)
+{
+	stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
+			REGS_APBH_BASE + HW_APBH_CTRL0);
+	stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
+			REGS_APBX_BASE + HW_APBX_CTRL0);
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+struct dma_notifier_block {
+	struct notifier_block nb;
+	void *data;
+};
+
+static int dma_cpufreq_notifier(struct notifier_block *self,
+				unsigned long phase, void *p)
+{
+	switch (phase) {
+	case CPUFREQ_POSTCHANGE:
+		stmp3xxx_dma_resume();
+		break;
+
+	case CPUFREQ_PRECHANGE:
+		stmp3xxx_dma_suspend();
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct dma_notifier_block dma_cpufreq_nb = {
+	.nb = {
+		.notifier_call = dma_cpufreq_notifier,
+	},
+};
+#endif /* CONFIG_CPU_FREQ */
+
+void __init stmp3xxx_dma_init(void)
+{
+	stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
+			REGS_APBH_BASE + HW_APBH_CTRL0);
+	stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
+			REGS_APBX_BASE + HW_APBX_CTRL0);
+#ifdef CONFIG_CPU_FREQ
+	cpufreq_register_notifier(&dma_cpufreq_nb.nb,
+				CPUFREQ_TRANSITION_NOTIFIER);
+#endif /* CONFIG_CPU_FREQ */
+}
diff --git a/arch/arm/plat-stmp3xxx/include/mach/clkdev.h b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h
new file mode 100644
index 00000000000..f9c39772d7c
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/cputype.h b/arch/arm/plat-stmp3xxx/include/mach/cputype.h
new file mode 100644
index 00000000000..b4e205b95f2
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/cputype.h
@@ -0,0 +1,33 @@
+/*
+ * Freescale STMP37XX/STMP378X CPU type detection
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_CPU_H
+#define __ASM_PLAT_CPU_H
+
+#ifdef CONFIG_ARCH_STMP37XX
+#define cpu_is_stmp37xx()	(1)
+#else
+#define cpu_is_stmp37xx()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_STMP378X
+#define cpu_is_stmp378x()	(1)
+#else
+#define cpu_is_stmp378x()	(0)
+#endif
+
+#endif /* __ASM_PLAT_CPU_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
new file mode 100644
index 00000000000..fb3b969bf0a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -0,0 +1,42 @@
+/*
+ * Debugging macro include header
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000	@ physical base address
+		addeq	\rx, \rx, #0x00070000
+		movne	\rx, #0xf0000000	@ virtual base
+		addne	\rx, \rx, #0x00070000
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #0]		@ data register at 0
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/arch/arm/plat-stmp3xxx/include/mach/dma.h b/arch/arm/plat-stmp3xxx/include/mach/dma.h
new file mode 100644
index 00000000000..7c58557c676
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/dma.h
@@ -0,0 +1,153 @@
+/*
+ * Freescale STMP37XX/STMP378X DMA helper interface
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_STMP3XXX_DMA_H
+#define __ASM_PLAT_STMP3XXX_DMA_H
+
+#include <linux/platform_device.h>
+#include <linux/dmapool.h>
+
+#if !defined(MAX_PIO_WORDS)
+#define MAX_PIO_WORDS   (15)
+#endif
+
+#define STMP3XXX_BUS_APBH		0
+#define STMP3XXX_BUS_APBX		1
+#define STMP3XXX_DMA_MAX_CHANNEL	16
+#define STMP3XXX_DMA_BUS(dma)		((dma) / 16)
+#define STMP3XXX_DMA_CHANNEL(dma)	((dma) % 16)
+#define STMP3XXX_DMA(channel, bus)	((bus) * 16 + (channel))
+#define MAX_DMA_ADDRESS			0xffffffff
+#define MAX_DMA_CHANNELS		32
+
+struct stmp3xxx_dma_command {
+	u32 next;
+	u32 cmd;
+	union {
+		u32 buf_ptr;
+		u32 alternate;
+	};
+	u32 pio_words[MAX_PIO_WORDS];
+};
+
+struct stmp3xxx_dma_descriptor {
+	struct stmp3xxx_dma_command *command;
+	dma_addr_t handle;
+
+	/* The virtual address of the buffer pointer */
+	void *virtual_buf_ptr;
+	/* The next descriptor in a the DMA chain (optional) */
+	struct stmp3xxx_dma_descriptor *next_descr;
+};
+
+struct stmp37xx_circ_dma_chain {
+	unsigned total_count;
+	struct stmp3xxx_dma_descriptor *chain;
+
+	unsigned free_index;
+	unsigned free_count;
+	unsigned active_index;
+	unsigned active_count;
+	unsigned cooked_index;
+	unsigned cooked_count;
+
+	int bus;
+	unsigned channel;
+};
+
+static inline struct stmp3xxx_dma_descriptor
+    *stmp3xxx_dma_circ_get_free_head(struct stmp37xx_circ_dma_chain *chain)
+{
+	return &(chain->chain[chain->free_index]);
+}
+
+static inline struct stmp3xxx_dma_descriptor
+    *stmp3xxx_dma_circ_get_cooked_head(struct stmp37xx_circ_dma_chain *chain)
+{
+	return &(chain->chain[chain->cooked_index]);
+}
+
+int stmp3xxx_dma_request(int ch, struct device *dev, const char *name);
+int stmp3xxx_dma_release(int ch);
+int stmp3xxx_dma_allocate_command(int ch,
+				  struct stmp3xxx_dma_descriptor *descriptor);
+int stmp3xxx_dma_free_command(int ch,
+			      struct stmp3xxx_dma_descriptor *descriptor);
+void stmp3xxx_dma_continue(int channel, u32 semaphore);
+void stmp3xxx_dma_go(int ch, struct stmp3xxx_dma_descriptor *head,
+		     u32 semaphore);
+int stmp3xxx_dma_running(int ch);
+int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
+			    struct stmp3xxx_dma_descriptor descriptors[],
+			    unsigned items);
+void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain);
+void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain);
+void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count);
+void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count);
+unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain);
+int stmp3xxx_dma_read_semaphore(int ch);
+void stmp3xxx_dma_init(void);
+void stmp3xxx_dma_set_alt_target(int ch, int target);
+void stmp3xxx_dma_suspend(void);
+void stmp3xxx_dma_resume(void);
+
+/*
+ * STMP37xx and STMP378x have different DMA control
+ * registers layout
+ */
+
+void stmp3xxx_arch_dma_freeze(int ch);
+void stmp3xxx_arch_dma_unfreeze(int ch);
+void stmp3xxx_arch_dma_reset_channel(int ch);
+void stmp3xxx_arch_dma_enable_interrupt(int ch);
+void stmp3xxx_arch_dma_clear_interrupt(int ch);
+int stmp3xxx_arch_dma_is_interrupt(int ch);
+
+static inline void stmp3xxx_dma_reset_channel(int ch)
+{
+	stmp3xxx_arch_dma_reset_channel(ch);
+}
+
+
+static inline void stmp3xxx_dma_freeze(int ch)
+{
+	stmp3xxx_arch_dma_freeze(ch);
+}
+
+static inline void stmp3xxx_dma_unfreeze(int ch)
+{
+	stmp3xxx_arch_dma_unfreeze(ch);
+}
+
+static inline void stmp3xxx_dma_enable_interrupt(int ch)
+{
+	stmp3xxx_arch_dma_enable_interrupt(ch);
+}
+
+static inline void stmp3xxx_dma_clear_interrupt(int ch)
+{
+	stmp3xxx_arch_dma_clear_interrupt(ch);
+}
+
+static inline int stmp3xxx_dma_is_interrupt(int ch)
+{
+	return stmp3xxx_arch_dma_is_interrupt(ch);
+}
+
+#endif /* __ASM_PLAT_STMP3XXX_DMA_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpio.h b/arch/arm/plat-stmp3xxx/include/mach/gpio.h
new file mode 100644
index 00000000000..a8b57925617
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/gpio.h
@@ -0,0 +1,28 @@
+/*
+ * Freescale STMP37XX/STMP378X GPIO interface
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_GPIO_H
+#define __ASM_PLAT_GPIO_H
+
+#define ARCH_NR_GPIOS	(32 * 3)
+#define gpio_to_irq(gpio) __gpio_to_irq(gpio)
+#define gpio_get_value(gpio) __gpio_get_value(gpio)
+#define gpio_set_value(gpio, value) __gpio_set_value(gpio, value)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_PLAT_GPIO_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpmi.h b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h
new file mode 100644
index 00000000000..e166432910a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h
@@ -0,0 +1,12 @@
+#ifndef __MACH_GPMI_H
+
+#include <linux/mtd/partitions.h>
+#include <mach/regs-gpmi.h>
+
+struct gpmi_platform_data {
+	void *pins;
+	int nr_parts;
+	struct mtd_partition *parts;
+	const char *part_types[];
+};
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/hardware.h b/arch/arm/plat-stmp3xxx/include/mach/hardware.h
new file mode 100644
index 00000000000..47b8978405b
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/hardware.h
@@ -0,0 +1,32 @@
+/*
+ * This file contains the hardware definitions of the Freescale STMP3XXX
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xF0000000                 /* VA of IO  */
+#define IO_SIZE			0x00100000                 /* How much? */
+#define IO_START		0x80000000                 /* PA of IO  */
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) & 0x000fffff) | IO_BASE)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/io.h b/arch/arm/plat-stmp3xxx/include/mach/io.h
new file mode 100644
index 00000000000..d08b1b7f3d1
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/io.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) 	__typesafe_io(a)
+#define __mem_pci(a)	(a)
+#define __mem_isa(a)	(a)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/memory.h b/arch/arm/plat-stmp3xxx/include/mach/memory.h
new file mode 100644
index 00000000000..7b875a07a1a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/memory.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x40000000)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/mmc.h b/arch/arm/plat-stmp3xxx/include/mach/mmc.h
new file mode 100644
index 00000000000..ba81e154376
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/mmc.h
@@ -0,0 +1,14 @@
+#ifndef _MACH_MMC_H
+#define _MACH_MMC_H
+
+#include <mach/regs-ssp.h>
+
+struct stmp3xxxmmc_platform_data {
+	int (*get_wp)(void);
+	unsigned long (*setclock)(void __iomem *base, unsigned long);
+	void (*cmd_pullup)(int);
+	int  (*hw_init)(void);
+	void (*hw_release)(void);
+};
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/pinmux.h b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
new file mode 100644
index 00000000000..cc5af82279a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
@@ -0,0 +1,157 @@
+/*
+ * Freescale STMP37XX/STMP378X Pin Multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __PINMUX_H
+#define __PINMUX_H
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <asm-generic/gpio.h>
+
+/* Pin definitions */
+#include "pins.h"
+#include <mach/pins.h>
+
+/*
+ * Each pin may be routed up to four different HW interfaces
+ * including GPIO
+ */
+enum pin_fun {
+	PIN_FUN1 = 0,
+	PIN_FUN2,
+	PIN_FUN3,
+	PIN_GPIO,
+};
+
+/*
+ * Each pin may have different output drive strength in range from
+ * 4mA to 20mA. The most common case is 4, 8 and 12 mA strengths.
+ */
+enum pin_strength {
+	PIN_4MA = 0,
+	PIN_8MA,
+	PIN_12MA,
+	PIN_16MA,
+	PIN_20MA,
+};
+
+/*
+ * Each pin can be programmed for 1.8V or 3.3V
+ */
+enum pin_voltage {
+	PIN_1_8V = 0,
+	PIN_3_3V,
+};
+
+/*
+ * Structure to define a group of pins and their parameters
+ */
+struct pin_desc {
+	unsigned id;
+	enum pin_fun fun;
+	enum pin_strength strength;
+	enum pin_voltage voltage;
+	unsigned pullup:1;
+};
+
+struct pin_group {
+	struct pin_desc *pins;
+	int nr_pins;
+};
+
+/* Set pin drive strength */
+void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
+			   const char *label);
+
+/* Set pin voltage */
+void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
+			   const char *label);
+
+/* Enable pull-up resistor for a pin */
+void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label);
+
+/*
+ * Request a pin ownership, only one module (identified by @label)
+ * may own a pin.
+ */
+int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label);
+
+/* Release pin */
+void stmp3xxx_release_pin(unsigned id, const char *label);
+
+void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun);
+
+/*
+ * Each bank is associated with a number of registers to control
+ * pin function, drive strength, voltage and pull-up reigster. The
+ * number of registers of a given type depends on the number of bits
+ * describin particular pin.
+ */
+#define HW_MUXSEL_NUM		2	/* registers per bank */
+#define HW_MUXSEL_PIN_LEN	2	/* bits per pin */
+#define HW_MUXSEL_PIN_NUM	16	/* pins per register */
+#define HW_MUXSEL_PINFUN_MASK	0x3	/* pin function mask */
+#define HW_MUXSEL_PINFUN_NUM	4	/* four options for a pin */
+
+#define HW_DRIVE_NUM		4	/* registers per bank */
+#define HW_DRIVE_PIN_LEN	4	/* bits per pin */
+#define HW_DRIVE_PIN_NUM	8	/* pins per register */
+#define HW_DRIVE_PINDRV_MASK	0x3	/* pin strength mask - 2 bits */
+#define HW_DRIVE_PINDRV_NUM	5	/* five possible strength values */
+#define HW_DRIVE_PINV_MASK	0x4	/* pin voltage mask - 1 bit */
+
+
+struct stmp3xxx_pinmux_bank {
+	struct gpio_chip chip;
+
+	/* Pins allocation map */
+	unsigned long pin_map;
+
+	/* Pin owner names */
+	const char *pin_labels[32];
+
+	/* Bank registers */
+	void __iomem *hw_muxsel[HW_MUXSEL_NUM];
+	void __iomem *hw_drive[HW_DRIVE_NUM];
+	void __iomem *hw_pull;
+
+	void __iomem *pin2irq,
+		*irqlevel,
+		*irqpolarity,
+		*irqen,
+		*irqstat;
+
+	/* HW MUXSEL register function bit values */
+	u8 functions[HW_MUXSEL_PINFUN_NUM];
+
+	/*
+	 * HW DRIVE register strength bit values:
+	 * 0xff - requested strength is not supported for this bank
+	 */
+	u8 strengths[HW_DRIVE_PINDRV_NUM];
+
+	/* GPIO things */
+	void __iomem *hw_gpio_in,
+		     *hw_gpio_out,
+		     *hw_gpio_doe;
+	int irq, virq;
+};
+
+int __init stmp3xxx_pinmux_init(int virtual_irq_start);
+
+#endif /* __PINMUX_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/pins.h b/arch/arm/plat-stmp3xxx/include/mach/pins.h
new file mode 100644
index 00000000000..c573318e1ca
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/pins.h
@@ -0,0 +1,30 @@
+/*
+ * Freescale STMP37XX/STMP378X Pin multiplexing interface definitions
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_PINS_H
+#define __ASM_PLAT_PINS_H
+
+#define STMP3XXX_PINID(bank, pin)	(bank * 32 + pin)
+#define STMP3XXX_PINID_TO_BANK(pinid)	(pinid / 32)
+#define STMP3XXX_PINID_TO_PINNUM(pinid)	(pinid % 32)
+
+/*
+ * Special invalid pin identificator to show a pin doesn't exist
+ */
+#define PINID_NO_PIN	STMP3XXX_PINID(0xFF, 0xFF)
+
+#endif /* __ASM_PLAT_PINS_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/platform.h b/arch/arm/plat-stmp3xxx/include/mach/platform.h
new file mode 100644
index 00000000000..7007ddaa91e
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/platform.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_PLATFORM_H
+#define __ASM_PLAT_PLATFORM_H
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+#include <asm/sizes.h>
+
+/* Virtual address where registers are mapped */
+#define STMP3XXX_REGS_PHBASE	0x80000000
+#ifdef __ASSEMBLER__
+#define STMP3XXX_REGS_BASE	0xF0000000
+#else
+#define STMP3XXX_REGS_BASE	(void __iomem *)0xF0000000
+#endif
+#define STMP3XXX_REGS_SIZE	SZ_1M
+
+/* Virtual address where OCRAM is mapped */
+#define STMP3XXX_OCRAM_PHBASE	0x00000000
+#ifdef __ASSEMBLER__
+#define STMP3XXX_OCRAM_BASE	0xf1000000
+#else
+#define STMP3XXX_OCRAM_BASE	(void __iomem *)0xf1000000
+#endif
+#define STMP3XXX_OCRAM_SIZE	(32 * SZ_1K)
+
+#ifdef CONFIG_ARCH_STMP37XX
+#define IRQ_PRIORITY_REG_RD	HW_ICOLL_PRIORITYn_RD
+#define IRQ_PRIORITY_REG_WR	HW_ICOLL_PRIORITYn_WR
+#endif
+
+#ifdef CONFIG_ARCH_STMP378X
+#define IRQ_PRIORITY_REG_RD	HW_ICOLL_INTERRUPTn_RD
+#define IRQ_PRIORITY_REG_WR	HW_ICOLL_INTERRUPTn_WR
+#endif
+
+#define HW_STMP3XXX_SET		0x04
+#define HW_STMP3XXX_CLR		0x08
+#define HW_STMP3XXX_TOG		0x0c
+
+#ifndef __ASSEMBLER__
+static inline void stmp3xxx_clearl(u32 v, void __iomem *r)
+{
+	__raw_writel(v, r + HW_STMP3XXX_CLR);
+}
+
+static inline void stmp3xxx_setl(u32 v, void __iomem *r)
+{
+	__raw_writel(v, r + HW_STMP3XXX_SET);
+}
+#endif
+
+#define BF(value, field) (((value) << BP_##field) & BM_##field)
+
+#endif /* __ASM_ARCH_PLATFORM_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h
new file mode 100644
index 00000000000..2e300feaa4c
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h
@@ -0,0 +1,54 @@
+/*
+ * Freescale STMP37XX/STMP378X core structure and function declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_STMP3XXX_H
+#define __ASM_PLAT_STMP3XXX_H
+
+#include <linux/irq.h>
+
+extern struct sys_timer stmp3xxx_timer;
+
+void stmp3xxx_init_irq(struct irq_chip *chip);
+void stmp3xxx_init(void);
+int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable);
+extern struct platform_device stmp3xxx_dbguart,
+			      stmp3xxx_appuart,
+			      stmp3xxx_watchdog,
+			      stmp3xxx_touchscreen,
+			      stmp3xxx_keyboard,
+			      stmp3xxx_gpmi,
+			      stmp3xxx_mmc,
+			      stmp3xxx_udc,
+			      stmp3xxx_ehci,
+			      stmp3xxx_rtc,
+			      stmp3xxx_spi1,
+			      stmp3xxx_spi2,
+			      stmp3xxx_backlight,
+			      stmp3xxx_rotdec,
+			      stmp3xxx_dcp,
+			      stmp3xxx_dcp_bootstream,
+			      stmp3xxx_persistent,
+			      stmp3xxx_framebuffer,
+			      stmp3xxx_battery;
+int stmp3xxx_ssp1_device_register(void);
+int stmp3xxx_ssp2_device_register(void);
+
+struct pin_group;
+void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label);
+int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label);
+
+#endif /* __ASM_PLAT_STMP3XXX_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/system.h b/arch/arm/plat-stmp3xxx/include/mach/system.h
new file mode 100644
index 00000000000..28a98888931
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+#include <mach/platform.h>
+#include <mach/regs-clkctrl.h>
+#include <mach/regs-power.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/* Set BATTCHRG to default value */
+	__raw_writel(0x00010000, REGS_POWER_BASE + HW_POWER_CHARGE);
+
+	/* Set MINPWR to default value   */
+	__raw_writel(0, REGS_POWER_BASE + HW_POWER_MINPWR);
+
+	/* Reset digital side of chip (but not power or RTC) */
+	__raw_writel(BM_CLKCTRL_RESET_DIG,
+			REGS_CLKCTRL_BASE + HW_CLKCTRL_RESET);
+
+	/* Should not return */
+}
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/timex.h b/arch/arm/plat-stmp3xxx/include/mach/timex.h
new file mode 100644
index 00000000000..3373985d7a8
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * System time clock is sourced from the 32k clock
+ */
+#define CLOCK_TICK_RATE		(32768)
diff --git a/arch/arm/plat-stmp3xxx/include/mach/uncompress.h b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h
new file mode 100644
index 00000000000..f79f5ee56cd
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h
@@ -0,0 +1,53 @@
+/*
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_UNCOMPRESS_H
+#define __ASM_PLAT_UNCOMPRESS_H
+
+/*
+ * Register includes are for when the MMU enabled; we need to define our
+ * own stuff here for pre-MMU use
+ */
+#define UARTDBG_BASE		0x80070000
+#define UART(c)			(((volatile unsigned *)UARTDBG_BASE)[c])
+
+/*
+ * This does not append a newline
+ */
+static void putc(char c)
+{
+	/* Wait for TX fifo empty */
+	while ((UART(6) & (1<<7)) == 0)
+		continue;
+
+	/* Write byte */
+	UART(0) = c;
+
+	/* Wait for last bit to exit the UART */
+	while (UART(6) & (1<<3))
+		continue;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..541b880c186
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define VMALLOC_END       (0xF0000000)
diff --git a/arch/arm/plat-stmp3xxx/irq.c b/arch/arm/plat-stmp3xxx/irq.c
new file mode 100644
index 00000000000..20de4e0401e
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/irq.c
@@ -0,0 +1,51 @@
+/*
+ * Freescale STMP37XX/STMP378X common interrupt handling code
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/regs-icoll.h>
+
+void __init stmp3xxx_init_irq(struct irq_chip *chip)
+{
+	unsigned int i, lv;
+
+	/* Reset the interrupt controller */
+	stmp3xxx_reset_block(REGS_ICOLL_BASE + HW_ICOLL_CTRL, true);
+
+	/* Disable all interrupts initially */
+	for (i = 0; i < NR_REAL_IRQS; i++) {
+		chip->mask(i);
+		set_irq_chip(i, chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+
+	/* Ensure vector is cleared */
+	for (lv = 0; lv < 4; lv++)
+		__raw_writel(1 << lv, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+	__raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
+
+	/* Barrier */
+	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
new file mode 100644
index 00000000000..d4120038220
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -0,0 +1,552 @@
+/*
+ * Freescale STMP378X/STMP378X Pin Multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define DEBUG
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/sysdev.h>
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/sysdev.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/regs-pinctrl.h>
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+
+#define NR_BANKS ARRAY_SIZE(pinmux_banks)
+static struct stmp3xxx_pinmux_bank pinmux_banks[] = {
+	[0] = {
+		.hw_muxsel = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL0,
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL1,
+		},
+		.hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE0,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE1,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE2,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE3,
+		},
+		.hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL0,
+		.functions = { 0x0, 0x1, 0x2, 0x3 },
+		.strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
+
+		.hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN0,
+		.hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT0,
+		.hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE0,
+		.irq = IRQ_GPIO0,
+
+		.pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ0,
+		.irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT0,
+		.irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL0,
+		.irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL0,
+		.irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN0,
+	},
+	[1] = {
+		.hw_muxsel = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL2,
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL3,
+		},
+		.hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE4,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE5,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE6,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE7,
+		},
+		.hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL1,
+		.functions = { 0x0, 0x1, 0x2, 0x3 },
+		.strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
+
+		.hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN1,
+		.hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT1,
+		.hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE1,
+		.irq = IRQ_GPIO1,
+
+		.pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ1,
+		.irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT1,
+		.irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL1,
+		.irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL1,
+		.irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN1,
+	},
+	[2] = {
+	       .hw_muxsel = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL4,
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL5,
+		},
+		.hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE8,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE9,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE10,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE11,
+		},
+		.hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL2,
+		.functions = { 0x0, 0x1, 0x2, 0x3 },
+		.strengths = { 0x0, 0x1, 0x2, 0x1, 0x2 },
+
+		.hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN2,
+		.hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT2,
+		.hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE2,
+		.irq = IRQ_GPIO2,
+
+		.pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ2,
+		.irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT2,
+		.irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL2,
+		.irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL2,
+		.irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN2,
+	},
+	[3] = {
+	       .hw_muxsel = {
+		       REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL6,
+		       REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL7,
+	       },
+	       .hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE12,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE13,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE14,
+			NULL,
+	       },
+	       .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL3,
+	       .functions = {0x0, 0x1, 0x2, 0x3},
+	       .strengths = {0x0, 0x1, 0x2, 0x3, 0xff},
+	},
+};
+
+static inline struct stmp3xxx_pinmux_bank *
+stmp3xxx_pinmux_bank(unsigned id, unsigned *bank, unsigned *pin)
+{
+	unsigned b, p;
+
+	b = STMP3XXX_PINID_TO_BANK(id);
+	p = STMP3XXX_PINID_TO_PINNUM(id);
+	BUG_ON(b >= NR_BANKS);
+	if (bank)
+		*bank = b;
+	if (pin)
+		*pin = p;
+	return &pinmux_banks[b];
+}
+
+/* Check if requested pin is owned by caller */
+static int stmp3xxx_check_pin(unsigned id, const char *label)
+{
+	unsigned pin;
+	struct stmp3xxx_pinmux_bank *pm = stmp3xxx_pinmux_bank(id, NULL, &pin);
+
+	if (!test_bit(pin, &pm->pin_map)) {
+		printk(KERN_WARNING
+		       "%s: Accessing free pin %x, caller %s\n",
+		       __func__, id, label);
+
+		return -EINVAL;
+	}
+
+	if (label && pm->pin_labels[pin] &&
+	    strcmp(label, pm->pin_labels[pin])) {
+		printk(KERN_WARNING
+		       "%s: Wrong pin owner %x, caller %s owner %s\n",
+		       __func__, id, label, pm->pin_labels[pin]);
+
+		return -EINVAL;
+	}
+	return 0;
+}
+
+void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
+		const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwdrive;
+	u32 shift, val;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d strength %d\n", __func__, label,
+		 bank, pin, strength);
+
+	hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
+	shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
+	val = pbank->strengths[strength];
+	if (val == 0xff) {
+		printk(KERN_WARNING
+		       "%s: strength is not supported for bank %d, caller %s",
+		       __func__, bank, label);
+		return;
+	}
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	pr_debug("%s: writing 0x%x to 0x%p register\n", __func__,
+			val << shift, hwdrive);
+	stmp3xxx_clearl(HW_DRIVE_PINDRV_MASK << shift, hwdrive);
+	stmp3xxx_setl(val << shift, hwdrive);
+}
+
+void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
+			  const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwdrive;
+	u32 shift;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d voltage %d\n", __func__, label,
+		 bank, pin, voltage);
+
+	hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
+	shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	pr_debug("%s: changing 0x%x bit in 0x%p register\n",
+			__func__, HW_DRIVE_PINV_MASK << shift, hwdrive);
+	if (voltage == PIN_1_8V)
+		stmp3xxx_clearl(HW_DRIVE_PINV_MASK << shift, hwdrive);
+	else
+		stmp3xxx_setl(HW_DRIVE_PINV_MASK << shift, hwdrive);
+}
+
+void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwpull;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d enable %d\n", __func__, label,
+		 bank, pin, enable);
+
+	hwpull = pbank->hw_pull;
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	pr_debug("%s: changing 0x%x bit in 0x%p register\n",
+			__func__, 1 << pin, hwpull);
+	if (enable)
+		stmp3xxx_setl(1 << pin, hwpull);
+	else
+		stmp3xxx_clearl(1 << pin, hwpull);
+}
+
+int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	u32 bank, pin;
+	int ret = 0;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d fun %d\n", __func__, label,
+		 bank, pin, fun);
+
+	if (test_bit(pin, &pbank->pin_map)) {
+		printk(KERN_WARNING
+		       "%s: CONFLICT DETECTED pin %d:%d caller %s owner %s\n",
+		       __func__, bank, pin, label, pbank->pin_labels[pin]);
+		return -EBUSY;
+	}
+
+	set_bit(pin, &pbank->pin_map);
+	pbank->pin_labels[pin] = label;
+
+	stmp3xxx_set_pin_type(id, fun);
+
+	return ret;
+}
+
+void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwmux;
+	u32 shift, val;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+
+	hwmux = pbank->hw_muxsel[pin / HW_MUXSEL_PIN_NUM];
+	shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
+
+	val = pbank->functions[fun];
+	shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
+	pr_debug("%s: writing 0x%x to 0x%p register\n",
+			__func__, val << shift, hwmux);
+	stmp3xxx_clearl(HW_MUXSEL_PINFUN_MASK << shift, hwmux);
+	stmp3xxx_setl(val << shift, hwmux);
+}
+
+void stmp3xxx_release_pin(unsigned id, const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d\n", __func__, label, bank, pin);
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	clear_bit(pin, &pbank->pin_map);
+	pbank->pin_labels[pin] = NULL;
+}
+
+int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label)
+{
+	struct pin_desc *pin;
+	int p;
+	int err = 0;
+
+	/* Allocate and configure pins */
+	for (p = 0; p < pin_group->nr_pins; p++) {
+		pr_debug("%s: #%d\n", __func__, p);
+		pin = &pin_group->pins[p];
+
+		err = stmp3xxx_request_pin(pin->id, pin->fun, label);
+		if (err)
+			goto out_err;
+
+		stmp3xxx_pin_strength(pin->id, pin->strength, label);
+		stmp3xxx_pin_voltage(pin->id, pin->voltage, label);
+		stmp3xxx_pin_pullup(pin->id, pin->pullup, label);
+	}
+
+	return 0;
+
+out_err:
+	/* Release allocated pins in case of error */
+	while (--p >= 0) {
+		pr_debug("%s: releasing #%d\n", __func__, p);
+		stmp3xxx_release_pin(pin_group->pins[p].id, label);
+	}
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_request_pin_group);
+
+void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label)
+{
+	struct pin_desc *pin;
+	int p;
+
+	for (p = 0; p < pin_group->nr_pins; p++) {
+		pin = &pin_group->pins[p];
+		stmp3xxx_release_pin(pin->id, label);
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_release_pin_group);
+
+static int stmp3xxx_irq_to_gpio(int irq,
+	struct stmp3xxx_pinmux_bank **bank, unsigned *gpio)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+
+	for (pm = pinmux_banks; pm < pinmux_banks + NR_BANKS; pm++)
+		if (pm->virq <= irq && irq < pm->virq + 32) {
+			*bank = pm;
+			*gpio = irq - pm->virq;
+			return 0;
+		}
+	return -ENOENT;
+}
+
+static int stmp3xxx_set_irqtype(unsigned irq, unsigned type)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+	int l, p;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		l = 0; p = 1; break;
+	case IRQ_TYPE_EDGE_FALLING:
+		l = 0; p = 0; break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		l = 1; p = 1; break;
+	case IRQ_TYPE_LEVEL_LOW:
+		l = 1; p = 0; break;
+	default:
+		pr_debug("%s: Incorrect GPIO interrupt type 0x%x\n",
+				__func__, type);
+		return -ENXIO;
+	}
+
+	if (l)
+		stmp3xxx_setl(1 << gpio, pm->irqlevel);
+	else
+		stmp3xxx_clearl(1 << gpio, pm->irqlevel);
+	if (p)
+		stmp3xxx_setl(1 << gpio, pm->irqpolarity);
+	else
+		stmp3xxx_clearl(1 << gpio, pm->irqpolarity);
+	return 0;
+}
+
+static void stmp3xxx_pin_ack_irq(unsigned irq)
+{
+	u32 stat;
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	stat = __raw_readl(pm->irqstat) & (1 << gpio);
+	stmp3xxx_clearl(stat, pm->irqstat);
+}
+
+static void stmp3xxx_pin_mask_irq(unsigned irq)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	stmp3xxx_clearl(1 << gpio, pm->irqen);
+	stmp3xxx_clearl(1 << gpio, pm->pin2irq);
+}
+
+static void stmp3xxx_pin_unmask_irq(unsigned irq)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	stmp3xxx_setl(1 << gpio, pm->irqen);
+	stmp3xxx_setl(1 << gpio, pm->pin2irq);
+}
+
+static inline
+struct stmp3xxx_pinmux_bank *to_pinmux_bank(struct gpio_chip *chip)
+{
+	return container_of(chip, struct stmp3xxx_pinmux_bank, chip);
+}
+
+static int stmp3xxx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+	return pm->virq + offset;
+}
+
+static int stmp3xxx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+	unsigned v;
+
+	v = __raw_readl(pm->hw_gpio_in) & (1 << offset);
+	return v ? 1 : 0;
+}
+
+static void stmp3xxx_gpio_set(struct gpio_chip *chip, unsigned offset, int v)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+	if (v)
+		stmp3xxx_setl(1 << offset, pm->hw_gpio_out);
+	else
+		stmp3xxx_clearl(1 << offset, pm->hw_gpio_out);
+}
+
+static int stmp3xxx_gpio_output(struct gpio_chip *chip, unsigned offset, int v)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+	stmp3xxx_setl(1 << offset, pm->hw_gpio_doe);
+	stmp3xxx_gpio_set(chip, offset, v);
+	return 0;
+}
+
+static int stmp3xxx_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+	stmp3xxx_clearl(1 << offset, pm->hw_gpio_doe);
+	return 0;
+}
+
+static int stmp3xxx_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return stmp3xxx_request_pin(chip->base + offset, PIN_GPIO, "gpio");
+}
+
+static void stmp3xxx_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	stmp3xxx_release_pin(chip->base + offset, "gpio");
+}
+
+static void stmp3xxx_gpio_irq(u32 irq, struct irq_desc *desc)
+{
+	struct stmp3xxx_pinmux_bank *pm = get_irq_data(irq);
+	int gpio_irq = pm->virq;
+	u32 stat = __raw_readl(pm->irqstat);
+
+	while (stat) {
+		if (stat & 1)
+			irq_desc[gpio_irq].handle_irq(gpio_irq,
+				&irq_desc[gpio_irq]);
+		gpio_irq++;
+		stat >>= 1;
+	}
+}
+
+static struct irq_chip gpio_irq_chip = {
+	.ack	= stmp3xxx_pin_ack_irq,
+	.mask	= stmp3xxx_pin_mask_irq,
+	.unmask	= stmp3xxx_pin_unmask_irq,
+	.set_type = stmp3xxx_set_irqtype,
+};
+
+int __init stmp3xxx_pinmux_init(int virtual_irq_start)
+{
+	int b, r = 0;
+	struct stmp3xxx_pinmux_bank *pm;
+	int virq;
+
+	for (b = 0; b < 3; b++) {
+		/* only banks 0,1,2 are allowed to GPIO */
+		pm = pinmux_banks + b;
+		pm->chip.base = 32 * b;
+		pm->chip.ngpio = 32;
+		pm->chip.owner = THIS_MODULE;
+		pm->chip.can_sleep = 1;
+		pm->chip.exported = 1;
+		pm->chip.to_irq = stmp3xxx_gpio_to_irq;
+		pm->chip.direction_input = stmp3xxx_gpio_input;
+		pm->chip.direction_output = stmp3xxx_gpio_output;
+		pm->chip.get = stmp3xxx_gpio_get;
+		pm->chip.set = stmp3xxx_gpio_set;
+		pm->chip.request = stmp3xxx_gpio_request;
+		pm->chip.free = stmp3xxx_gpio_free;
+		pm->virq = virtual_irq_start + b * 32;
+
+		for (virq = pm->virq; virq < pm->virq; virq++) {
+			gpio_irq_chip.mask(virq);
+			set_irq_chip(virq, &gpio_irq_chip);
+			set_irq_handler(virq, handle_level_irq);
+			set_irq_flags(virq, IRQF_VALID);
+		}
+		r = gpiochip_add(&pm->chip);
+		if (r < 0)
+			break;
+		set_irq_chained_handler(pm->irq, stmp3xxx_gpio_irq);
+		set_irq_data(pm->irq, pm);
+	}
+	return r;
+}
+
+MODULE_AUTHOR("Vladislav Buzov");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-stmp3xxx/timer.c b/arch/arm/plat-stmp3xxx/timer.c
new file mode 100644
index 00000000000..063c7bc0e74
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/timer.c
@@ -0,0 +1,189 @@
+/*
+ * System timer for Freescale STMP37XX/STMP378X
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach/time.h>
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/regs-timrot.h>
+
+static irqreturn_t
+stmp3xxx_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *c = dev_id;
+
+	/* timer 0 */
+	if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0) &
+			BM_TIMROT_TIMCTRLn_IRQ) {
+		stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
+				REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+		c->event_handler(c);
+	}
+
+	/* timer 1 */
+	else if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1)
+			& BM_TIMROT_TIMCTRLn_IRQ) {
+		stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
+				REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+		stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN,
+				REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+		__raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static cycle_t stmp3xxx_clock_read(struct clocksource *cs)
+{
+	return ~((__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1)
+				& 0xFFFF0000) >> 16);
+}
+
+static int
+stmp3xxx_timrot_set_next_event(unsigned long delta,
+		struct clock_event_device *dev)
+{
+	/* reload the timer */
+	__raw_writel(delta, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	return 0;
+}
+
+static void
+stmp3xxx_timrot_set_mode(enum clock_event_mode mode,
+		struct clock_event_device *dev)
+{
+}
+
+static struct clock_event_device ckevt_timrot = {
+	.name		= "timrot",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= stmp3xxx_timrot_set_next_event,
+	.set_mode	= stmp3xxx_timrot_set_mode,
+};
+
+static struct clocksource cksrc_stmp3xxx = {
+	.name           = "cksrc_stmp3xxx",
+	.rating         = 250,
+	.read           = stmp3xxx_clock_read,
+	.mask           = CLOCKSOURCE_MASK(16),
+	.shift          = 10,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct irqaction stmp3xxx_timer_irq = {
+	.name		= "stmp3xxx_timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= stmp3xxx_timer_interrupt,
+	.dev_id		= &ckevt_timrot,
+};
+
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static void __init stmp3xxx_init_timer(void)
+{
+	cksrc_stmp3xxx.mult = clocksource_hz2mult(CLOCK_TICK_RATE,
+				cksrc_stmp3xxx.shift);
+	ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+				ckevt_timrot.shift);
+	ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot);
+	ckevt_timrot.max_delta_ns = clockevent_delta2ns(0xFFF, &ckevt_timrot);
+	ckevt_timrot.cpumask = cpumask_of(0);
+
+	stmp3xxx_reset_block(REGS_TIMROT_BASE, false);
+
+	/* clear two timers */
+	__raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	__raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+
+	/* configure them */
+	__raw_writel(
+		(8 << BP_TIMROT_TIMCTRLn_SELECT) |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+	__raw_writel(
+		(8 << BP_TIMROT_TIMCTRLn_SELECT) |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+
+	__raw_writel(CLOCK_TICK_RATE / HZ - 1,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	__raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+
+	setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq);
+
+	clocksource_register(&cksrc_stmp3xxx);
+	clockevents_register_device(&ckevt_timrot);
+}
+
+#ifdef CONFIG_PM
+
+void stmp3xxx_suspend_timer(void)
+{
+	stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN | BM_TIMROT_TIMCTRLn_IRQ,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+	stmp3xxx_setl(BM_TIMROT_ROTCTRL_CLKGATE,
+			REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
+}
+
+void stmp3xxx_resume_timer(void)
+{
+	stmp3xxx_clearl(BM_TIMROT_ROTCTRL_SFTRST | BM_TIMROT_ROTCTRL_CLKGATE,
+			REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
+	__raw_writel(
+		8 << BP_TIMROT_TIMCTRLn_SELECT |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+	__raw_writel(
+		8 << BP_TIMROT_TIMCTRLn_SELECT |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+	__raw_writel(CLOCK_TICK_RATE / HZ - 1,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	__raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+}
+
+#else
+
+#define stmp3xxx_suspend_timer	NULL
+#define	stmp3xxx_resume_timer	NULL
+
+#endif	/* CONFIG_PM */
+
+struct sys_timer stmp3xxx_timer = {
+	.init		= stmp3xxx_init_timer,
+	.suspend	= stmp3xxx_suspend_timer,
+	.resume		= stmp3xxx_resume_timer,
+};
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 83c4e384b16..1aeae38725d 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -100,6 +100,7 @@ ENTRY(vfp_support_entry)
 	beq	no_old_VFP_process
 	VFPFSTMIA r4, r5		@ save the working registers
 	VFPFMRX	r5, FPSCR		@ current status
+#ifndef CONFIG_CPU_FEROCEON
 	tst	r1, #FPEXC_EX		@ is there additional state to save?
 	beq	1f
 	VFPFMRX	r6, FPINST		@ FPINST (only if FPEXC.EX is set)
@@ -107,6 +108,7 @@ ENTRY(vfp_support_entry)
 	beq	1f
 	VFPFMRX	r8, FPINST2		@ FPINST2 if needed (and present)
 1:
+#endif
 	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
 					@ and point r4 at the word at the
 					@ start of the register dump
@@ -119,6 +121,7 @@ no_old_VFP_process:
 	VFPFLDMIA r10, r5		@ reload the working registers while
 					@ FPEXC is in a safe state
 	ldmia	r10, {r1, r5, r6, r8}	@ load FPEXC, FPSCR, FPINST, FPINST2
+#ifndef CONFIG_CPU_FEROCEON
 	tst	r1, #FPEXC_EX		@ is there additional state to restore?
 	beq	1f
 	VFPFMXR	FPINST, r6		@ restore FPINST (only if FPEXC.EX is set)
@@ -126,6 +129,7 @@ no_old_VFP_process:
 	beq	1f
 	VFPFMXR	FPINST2, r8		@ FPINST2 if needed (and present)
 1:
+#endif
 	VFPFMXR	FPSCR, r5		@ restore status
 
 check_for_exception:
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 01599c4ef72..2d7423af119 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -253,12 +253,14 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 	}
 
 	if (fpexc & FPEXC_EX) {
+#ifndef CONFIG_CPU_FEROCEON
 		/*
 		 * Asynchronous exception. The instruction is read from FPINST
 		 * and the interrupted instruction has to be restarted.
 		 */
 		trigger = fmrx(FPINST);
 		regs->ARM_pc -= 4;
+#endif
 	} else if (!(fpexc & FPEXC_DEX)) {
 		/*
 		 * Illegal combination of bits. It can be caused by an
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index c56fd3eb7c1..a60cfe75791 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -885,7 +885,7 @@ config BFIN_GPTIMERS
 	  are unsure, say N.
 
 	  To compile this driver as a module, choose M here: the module
-	  will be called gptimers.ko.
+	  will be called gptimers.
 
 choice
 	prompt "Uncached DMA region"
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 89497fb0428..3b52c80e5e3 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -2,7 +2,7 @@
  * PowerPC64 SLB support.
  *
  * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM
- * Based on earlier code writteh by:
+ * Based on earlier code written by:
  * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com
  *    Copyright (c) 2001 Dave Engebretsen
  * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 6d227413cbe..ec688234852 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -62,7 +62,7 @@ __HEAD
 	.org   0x100
 #
 # subroutine for loading from tape
-# Paramters:
+# Parameters:
 #  R1 = device number
 #  R2 = load address
 .Lloader:
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 9120717c070..2aa1908e5ce 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -535,6 +535,15 @@ config PATA_OPTIDMA
 
 	  If unsure, say N.
 
+config PATA_PALMLD
+	tristate "Palm LifeDrive PATA support"
+	depends on MACH_PALMLD
+	help
+	  This option enables support for Palm LifeDrive's internal ATA
+	  port via the new ATA layer.
+
+	  If unsure, say N.
+
 config PATA_PCMCIA
 	tristate "PCMCIA PATA support"
 	depends on PCMCIA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 7f1ecf99528..1558059874f 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_MPC52xx)	+= pata_mpc52xx.o
 obj-$(CONFIG_PATA_MARVELL)	+= pata_marvell.o
 obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
 obj-$(CONFIG_PATA_OLDPIIX)	+= pata_oldpiix.o
+obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld.o
 obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
 obj-$(CONFIG_PATA_PDC2027X)	+= pata_pdc2027x.o
 obj-$(CONFIG_PATA_PDC_OLD)	+= pata_pdc202xx_old.o
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 6273d98d00e..ac176da1f94 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -748,9 +748,9 @@ static int ata_acpi_run_tf(struct ata_device *dev,
 /**
  * ata_acpi_exec_tfs - get then write drive taskfile settings
  * @dev: target ATA device
- * @nr_executed: out paramter for the number of executed commands
+ * @nr_executed: out parameter for the number of executed commands
  *
- * Evaluate _GTF and excute returned taskfiles.
+ * Evaluate _GTF and execute returned taskfiles.
  *
  * LOCKING:
  * EH context.
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 94919ad03df..fa22f94ca41 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2864,7 +2864,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 /**
  *	ata_set_mode - Program timings and issue SET FEATURES - XFER
  *	@link: link on which timings will be programmed
- *	@r_failed_dev: out paramter for failed device
+ *	@r_failed_dev: out parameter for failed device
  *
  *	Set ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
  *	ata_set_mode() fails, pointer to the failing device is
diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
new file mode 100644
index 00000000000..11fb4ccc74b
--- /dev/null
+++ b/drivers/ata/pata_palmld.c
@@ -0,0 +1,150 @@
+/*
+ * drivers/ata/pata_palmld.c
+ *
+ * Driver for IDE channel in Palm LifeDrive
+ *
+ * Based on research of:
+ *		Alex Osborne <ato@meshy.org>
+ *
+ * Rewrite for mainline:
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Rewritten version based on pata_ixp4xx_cf.c:
+ * ixp4xx PATA/Compact Flash driver
+ * Copyright (C) 2006-07 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <scsi/scsi_host.h>
+#include <mach/palmld.h>
+
+#define DRV_NAME "pata_palmld"
+
+static struct scsi_host_template palmld_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations palmld_port_ops = {
+	.inherits		= &ata_sff_port_ops,
+	.sff_data_xfer		= ata_sff_data_xfer_noirq,
+	.cable_detect		= ata_cable_40wire,
+};
+
+static __devinit int palmld_pata_probe(struct platform_device *pdev)
+{
+	struct ata_host *host;
+	struct ata_port *ap;
+	void __iomem *mem;
+	int ret;
+
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
+	/* remap drive's physical memory address */
+	mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
+	if (!mem)
+		return -ENOMEM;
+
+	/* request and activate power GPIO, IRQ GPIO */
+	ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
+	if (ret)
+		goto err3;
+
+	/* reset the drive */
+	gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
+	msleep(30);
+	gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1);
+	msleep(30);
+
+	/* setup the ata port */
+	ap = host->ports[0];
+	ap->ops	= &palmld_port_ops;
+	ap->pio_mask = ATA_PIO4;
+	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_POLLING;
+
+	/* memory mapping voodoo */
+	ap->ioaddr.cmd_addr = mem + 0x10;
+	ap->ioaddr.altstatus_addr = mem + 0xe;
+	ap->ioaddr.ctl_addr = mem + 0xe;
+
+	/* start the port */
+	ata_sff_std_ports(&ap->ioaddr);
+
+	/* activate host */
+	return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
+					&palmld_sht);
+
+err3:
+	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+err2:
+	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+err1:
+	return ret;
+}
+
+static __devexit int palmld_pata_remove(struct platform_device *dev)
+{
+	struct ata_host *host = platform_get_drvdata(dev);
+
+	ata_host_detach(host);
+
+	/* power down the HDD */
+	gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
+
+	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+
+	return 0;
+}
+
+static struct platform_driver palmld_pata_platform_driver = {
+	.driver	 = {
+		.name   = DRV_NAME,
+		.owner  = THIS_MODULE,
+	},
+	.probe		= palmld_pata_probe,
+	.remove		= __devexit_p(palmld_pata_remove),
+};
+
+static int __init palmld_pata_init(void)
+{
+	return platform_driver_register(&palmld_pata_platform_driver);
+}
+
+static void __exit palmld_pata_exit(void)
+{
+	platform_driver_unregister(&palmld_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PalmLD PATA driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(palmld_pata_init);
+module_exit(palmld_pata_exit);
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index c6599618523..4b04a15146d 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -279,7 +279,7 @@ static struct device *next_device(struct klist_iter *i)
  *
  * NOTE: The device that returns a non-zero value is not retained
  * in any way, nor is its refcount incremented. If the caller needs
- * to retain this data, it should do, and increment the reference
+ * to retain this data, it should do so, and increment the reference
  * count in the supplied callback.
  */
 int bus_for_each_dev(struct bus_type *bus, struct device *start,
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index ac5e05a98b2..bb72ada9f07 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -112,7 +112,7 @@ config GDROM
 	  with up to 1 GB of data. This drive will also read standard CD ROM
 	  disks. Select this option to access any disks in your GD ROM drive.
 	  Most users will want to say "Y" here.
-	  You can also build this as a module which will be called gdrom.ko
+	  You can also build this as a module which will be called gdrom.
 
 source "drivers/block/paride/Kconfig"
 
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index b1e9652c0d9..30bae6de6a0 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -692,7 +692,7 @@ config HVCS
 	  this driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called hvcs.ko.  Additionally, this module
+	  module will be called hvcs.  Additionally, this module
 	  will depend on arch specific APIs exported from hvcserver.ko
 	  which will also be compiled when this driver is built as a
 	  module.
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index fd3ebd1be57..72429b6b2fa 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -779,7 +779,7 @@ static void change_speed(struct async_struct *info,
 		info->IER |= UART_IER_MSI;
 	}
 	/* TBD:
-	 * Does clearing IER_MSI imply that we should disbale the VBL interrupt ?
+	 * Does clearing IER_MSI imply that we should disable the VBL interrupt ?
 	 */
 
 	/*
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 9c00440dcf8..f4b3f7293fe 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -148,3 +148,15 @@ config HW_RANDOM_VIRTIO
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called virtio-rng.  If unsure, say N.
+
+config HW_RANDOM_MXC_RNGA
+	tristate "Freescale i.MX RNGA Random Number Generator"
+	depends on HW_RANDOM && ARCH_HAS_RNGA
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on Freescale i.MX processors.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mxc-rnga.
+
+	  If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index e81d21a5f28..fd1ecd2f673 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
 obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
 obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
 obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
+obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
diff --git a/drivers/char/hw_random/mxc-rnga.c b/drivers/char/hw_random/mxc-rnga.c
new file mode 100644
index 00000000000..187c6be80f4
--- /dev/null
+++ b/drivers/char/hw_random/mxc-rnga.c
@@ -0,0 +1,247 @@
+/*
+ * RNG driver for Freescale RNGA
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Author: Alan Carvalho de Assis <acassis@gmail.com>
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This driver is based on other RNG drivers.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+
+/* RNGA Registers */
+#define RNGA_CONTROL			0x00
+#define RNGA_STATUS			0x04
+#define RNGA_ENTROPY			0x08
+#define RNGA_OUTPUT_FIFO		0x0c
+#define RNGA_MODE			0x10
+#define RNGA_VERIFICATION_CONTROL	0x14
+#define RNGA_OSC_CONTROL_COUNTER	0x18
+#define RNGA_OSC1_COUNTER		0x1c
+#define RNGA_OSC2_COUNTER		0x20
+#define RNGA_OSC_COUNTER_STATUS		0x24
+
+/* RNGA Registers Range */
+#define RNG_ADDR_RANGE			0x28
+
+/* RNGA Control Register */
+#define RNGA_CONTROL_SLEEP		0x00000010
+#define RNGA_CONTROL_CLEAR_INT		0x00000008
+#define RNGA_CONTROL_MASK_INTS		0x00000004
+#define RNGA_CONTROL_HIGH_ASSURANCE	0x00000002
+#define RNGA_CONTROL_GO			0x00000001
+
+#define RNGA_STATUS_LEVEL_MASK		0x0000ff00
+
+/* RNGA Status Register */
+#define RNGA_STATUS_OSC_DEAD		0x80000000
+#define RNGA_STATUS_SLEEP		0x00000010
+#define RNGA_STATUS_ERROR_INT		0x00000008
+#define RNGA_STATUS_FIFO_UNDERFLOW	0x00000004
+#define RNGA_STATUS_LAST_READ_STATUS	0x00000002
+#define RNGA_STATUS_SECURITY_VIOLATION	0x00000001
+
+static struct platform_device *rng_dev;
+
+static int mxc_rnga_data_present(struct hwrng *rng)
+{
+	int level;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	/* how many random numbers is in FIFO? [0-16] */
+	level = ((__raw_readl(rng_base + RNGA_STATUS) &
+			RNGA_STATUS_LEVEL_MASK) >> 8);
+
+	return level > 0 ? 1 : 0;
+}
+
+static int mxc_rnga_data_read(struct hwrng *rng, u32 * data)
+{
+	int err;
+	u32 ctrl;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	/* retrieve a random number from FIFO */
+	*data = __raw_readl(rng_base + RNGA_OUTPUT_FIFO);
+
+	/* some error while reading this random number? */
+	err = __raw_readl(rng_base + RNGA_STATUS) & RNGA_STATUS_ERROR_INT;
+
+	/* if error: clear error interrupt, but doesn't return random number */
+	if (err) {
+		dev_dbg(&rng_dev->dev, "Error while reading random number!\n");
+		ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+		__raw_writel(ctrl | RNGA_CONTROL_CLEAR_INT,
+					rng_base + RNGA_CONTROL);
+		return 0;
+	} else
+		return 4;
+}
+
+static int mxc_rnga_init(struct hwrng *rng)
+{
+	u32 ctrl, osc;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	/* wake up */
+	ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+	__raw_writel(ctrl & ~RNGA_CONTROL_SLEEP, rng_base + RNGA_CONTROL);
+
+	/* verify if oscillator is working */
+	osc = __raw_readl(rng_base + RNGA_STATUS);
+	if (osc & RNGA_STATUS_OSC_DEAD) {
+		dev_err(&rng_dev->dev, "RNGA Oscillator is dead!\n");
+		return -ENODEV;
+	}
+
+	/* go running */
+	ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+	__raw_writel(ctrl | RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+
+	return 0;
+}
+
+static void mxc_rnga_cleanup(struct hwrng *rng)
+{
+	u32 ctrl;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+
+	/* stop rnga */
+	__raw_writel(ctrl & ~RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+}
+
+static struct hwrng mxc_rnga = {
+	.name = "mxc-rnga",
+	.init = mxc_rnga_init,
+	.cleanup = mxc_rnga_cleanup,
+	.data_present = mxc_rnga_data_present,
+	.data_read = mxc_rnga_data_read
+};
+
+static int __init mxc_rnga_probe(struct platform_device *pdev)
+{
+	int err = -ENODEV;
+	struct clk *clk;
+	struct resource *res, *mem;
+	void __iomem *rng_base = NULL;
+
+	if (rng_dev)
+		return -EBUSY;
+
+	clk = clk_get(&pdev->dev, "rng");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Could not get rng_clk!\n");
+		err = PTR_ERR(clk);
+		goto out;
+	}
+
+	clk_enable(clk);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENOENT;
+		goto err_region;
+	}
+
+	mem = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (mem == NULL) {
+		err = -EBUSY;
+		goto err_region;
+	}
+
+	rng_base = ioremap(res->start, resource_size(res));
+	if (!rng_base) {
+		err = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	mxc_rnga.priv = (unsigned long)rng_base;
+
+	err = hwrng_register(&mxc_rnga);
+	if (err) {
+		dev_err(&pdev->dev, "MXC RNGA registering failed (%d)\n", err);
+		goto err_register;
+	}
+
+	rng_dev = pdev;
+
+	dev_info(&pdev->dev, "MXC RNGA Registered.\n");
+
+	return 0;
+
+err_register:
+	iounmap(rng_base);
+	rng_base = NULL;
+
+err_ioremap:
+	release_mem_region(res->start, resource_size(res));
+
+err_region:
+	clk_disable(clk);
+	clk_put(clk);
+
+out:
+	return err;
+}
+
+static int __exit mxc_rnga_remove(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	void __iomem *rng_base = (void __iomem *)mxc_rnga.priv;
+	struct clk *clk = clk_get(&pdev->dev, "rng");
+
+	hwrng_unregister(&mxc_rnga);
+
+	iounmap(rng_base);
+
+	release_mem_region(res->start, resource_size(res));
+
+	clk_disable(clk);
+	clk_put(clk);
+
+	return 0;
+}
+
+static struct platform_driver mxc_rnga_driver = {
+	.driver = {
+		   .name = "mxc_rnga",
+		   .owner = THIS_MODULE,
+		   },
+	.remove = __exit_p(mxc_rnga_remove),
+};
+
+static int __init mod_init(void)
+{
+	return platform_driver_probe(&mxc_rnga_driver, mxc_rnga_probe);
+}
+
+static void __exit mod_exit(void)
+{
+	platform_driver_unregister(&mxc_rnga_driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("H/W RNGA driver for i.MX");
+MODULE_LICENSE("GPL");
diff --git a/drivers/connector/Kconfig b/drivers/connector/Kconfig
index 100bfd42206..6e6730f9dfd 100644
--- a/drivers/connector/Kconfig
+++ b/drivers/connector/Kconfig
@@ -7,7 +7,7 @@ menuconfig CONNECTOR
 	  of the netlink socket protocol.
 
 	  Connector support can also be built as a module.  If so, the module
-	  will be called cn.ko.
+	  will be called cn.
 
 if CONNECTOR
 
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index e748e55bd86..5b27692372b 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -34,7 +34,7 @@ config CRYPTO_DEV_PADLOCK_AES
 	  Available in VIA C3 and newer CPUs.
 
 	  If unsure say M. The compiled module will be
-	  called padlock-aes.ko
+	  called padlock-aes.
 
 config CRYPTO_DEV_PADLOCK_SHA
 	tristate "PadLock driver for SHA1 and SHA256 algorithms"
@@ -47,7 +47,7 @@ config CRYPTO_DEV_PADLOCK_SHA
 	  Available in VIA C7 and newer processors.
 
 	  If unsure say M. The compiled module will be
-	  called padlock-sha.ko
+	  called padlock-sha.
 
 config CRYPTO_DEV_GEODE
 	tristate "Support for the Geode LX AES engine"
@@ -79,7 +79,7 @@ config ZCRYPT_MONOLITHIC
 	bool "Monolithic zcrypt module"
 	depends on ZCRYPT="m"
 	help
-	  Select this option if you want to have a single module z90crypt.ko
+	  Select this option if you want to have a single module z90crypt,
 	  that contains all parts of the crypto device driver (ap bus,
 	  request router and all the card drivers).
 
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index facfdb1fa71..d205d493a68 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -1084,7 +1084,7 @@ static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
 	struct pci_dev *dev = pvt->dev_d0f1;
 	int enable = 1;
 
-	/* Allow module paramter override, else see if CPU supports parity */
+	/* Allow module parameter override, else see if CPU supports parity */
 	if (sysbus_parity != -1) {
 		enable = sysbus_parity;
 	} else if (cpu_id[0] &&
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 7e67dcb3d4f..7831a0318d3 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -116,9 +116,16 @@ config HID_CYPRESS
 	---help---
 	Support for cypress mouse and barcode readers.
 
-config DRAGONRISE_FF
-	tristate "DragonRise Inc. force feedback support"
+config HID_DRAGONRISE
+	tristate "DragonRise Inc. support" if EMBEDDED
 	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	Say Y here if you have DragonRise Inc.game controllers.
+
+config DRAGONRISE_FF
+	bool "DragonRise Inc. force feedback support"
+	depends on HID_DRAGONRISE
 	select INPUT_FF_MEMLESS
 	---help---
 	Say Y here if you want to enable force feedback support for DragonRise Inc.
@@ -160,7 +167,7 @@ config HID_LOGITECH
 	Support for Logitech devices that are not fully compliant with HID standard.
 
 config LOGITECH_FF
-	bool "Logitech force feedback"
+	bool "Logitech force feedback support"
 	depends on HID_LOGITECH
 	select INPUT_FF_MEMLESS
 	help
@@ -176,7 +183,7 @@ config LOGITECH_FF
 	  force feedback.
 
 config LOGIRUMBLEPAD2_FF
-	bool "Logitech Rumblepad 2 force feedback"
+	bool "Logitech Rumblepad 2 force feedback support"
 	depends on HID_LOGITECH
 	select INPUT_FF_MEMLESS
 	help
@@ -211,11 +218,19 @@ config HID_PANTHERLORD
 	---help---
 	Support for PantherLord/GreenAsia based device support.
 
+config HID_PANTHERLORD
+	tristate "Pantherlord support" if EMBEDDED
+	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	  Say Y here if you have a PantherLord/GreenAsia based game controller
+	  or adapter.
+
 config PANTHERLORD_FF
 	bool "Pantherlord force feedback support"
 	depends on HID_PANTHERLORD
 	select INPUT_FF_MEMLESS
-	help
+	---help---
 	  Say Y here if you have a PantherLord/GreenAsia based game controller
 	  or adapter and want to enable force feedback support for it.
 
@@ -247,15 +262,38 @@ config HID_SUNPLUS
 	---help---
 	Support for Sunplus wireless desktop.
 
-config GREENASIA_FF
-	tristate "GreenAsia (Product ID 0x12) force feedback support"
+config HID_GREENASIA
+	tristate "GreenAsia (Product ID 0x12) support" if EMBEDDED
 	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	  Say Y here if you have a GreenAsia (Product ID 0x12) based game
+	  controller or adapter.
+
+config GREENASIA_FF
+	bool "GreenAsia (Product ID 0x12) force feedback support"
+	depends on HID_GREENASIA
 	select INPUT_FF_MEMLESS
 	---help---
 	Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
 	(like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
 	and want to enable force feedback support for it.
 
+config HID_SMARTJOYPLUS
+	tristate "SmartJoy PLUS PS2/USB adapter support" if EMBEDDED
+	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	Support for SmartJoy PLUS PS2/USB adapter.
+
+config SMARTJOYPLUS_FF
+	bool "SmartJoy PLUS PS2/USB adapter force feedback support"
+	depends on HID_SMARTJOYPLUS
+	select INPUT_FF_MEMLESS
+	---help---
+	Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
+	enable force feedback support for it.
+
 config HID_TOPSEED
 	tristate "TopSeed Cyberlink remote control support" if EMBEDDED
 	depends on USB_HID
@@ -263,21 +301,45 @@ config HID_TOPSEED
 	---help---
 	Say Y if you have a TopSeed Cyberlink remote control.
 
-config THRUSTMASTER_FF
-	tristate "ThrustMaster devices support"
+config HID_THRUSTMASTER
+	tristate "ThrustMaster devices support" if EMBEDDED
 	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
+	  a THRUSTMASTER Ferrari GT Rumble Wheel.
+
+config THRUSTMASTER_FF
+	bool "ThrustMaster devices force feedback support"
+	depends on HID_THRUSTMASTER
 	select INPUT_FF_MEMLESS
-	help
+	---help---
 	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
-	  a THRUSTMASTER Ferrari GT Rumble Force or Force Feedback Wheel.
+	  a THRUSTMASTER Ferrari GT Rumble Force or Force Feedback Wheel and
+	  want to enable force feedback support for it.
 
-config ZEROPLUS_FF
-	tristate "Zeroplus based game controller support"
+config HID_WACOM
+	tristate "Wacom Bluetooth devices support" if EMBEDDED
+	depends on BT_HIDP
+	default !EMBEDDED
+	---help---
+	Support for Wacom Graphire Bluetooth tablet.
+
+config HID_ZEROPLUS
+	tristate "Zeroplus based game controller support" if EMBEDDED
 	depends on USB_HID
-	select INPUT_FF_MEMLESS
-	help
+	default !EMBEDDED
+	---help---
 	  Say Y here if you have a Zeroplus based game controller.
 
+config ZEROPLUS_FF
+	bool "Zeroplus based game controller force feedback support"
+	depends on HID_ZEROPLUS
+	select INPUT_FF_MEMLESS
+	---help---
+	  Say Y here if you have a Zeroplus based game controller and want
+	  to have force feedback support for it.
+
 endmenu
 
 endif # HID_SUPPORT
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 1f7cb0fd450..db35151673b 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
 obj-$(CONFIG_HID_CHERRY)	+= hid-cherry.o
 obj-$(CONFIG_HID_CHICONY)	+= hid-chicony.o
 obj-$(CONFIG_HID_CYPRESS)	+= hid-cypress.o
-obj-$(CONFIG_DRAGONRISE_FF)	+= hid-drff.o
+obj-$(CONFIG_HID_DRAGONRISE)	+= hid-drff.o
 obj-$(CONFIG_HID_EZKEY)		+= hid-ezkey.o
 obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
 obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
@@ -34,12 +34,14 @@ obj-$(CONFIG_HID_NTRIG)		+= hid-ntrig.o
 obj-$(CONFIG_HID_PANTHERLORD)	+= hid-pl.o
 obj-$(CONFIG_HID_PETALYNX)	+= hid-petalynx.o
 obj-$(CONFIG_HID_SAMSUNG)	+= hid-samsung.o
+obj-$(CONFIG_HID_SMARTJOYPLUS)	+= hid-sjoy.o
 obj-$(CONFIG_HID_SONY)		+= hid-sony.o
 obj-$(CONFIG_HID_SUNPLUS)	+= hid-sunplus.o
-obj-$(CONFIG_GREENASIA_FF)	+= hid-gaff.o
-obj-$(CONFIG_THRUSTMASTER_FF)	+= hid-tmff.o
+obj-$(CONFIG_HID_GREENASIA)	+= hid-gaff.o
+obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
-obj-$(CONFIG_ZEROPLUS_FF)	+= hid-zpff.o
+obj-$(CONFIG_HID_ZEROPLUS)	+= hid-zpff.o
+obj-$(CONFIG_HID_WACOM)		+= hid-wacom.o
 
 obj-$(CONFIG_USB_HID)		+= usbhid/
 obj-$(CONFIG_USB_MOUSE)		+= usbhid/
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index acbce5745b0..303ccce05bb 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -436,10 +436,6 @@ static const struct hid_device_id apple_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 
-	/* Apple wireless Mighty Mouse */
-	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c),
-		.driver_data = APPLE_MIGHTYMOUSE | APPLE_INVERT_HWHEEL },
-
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, apple_devices);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8551693d645..f2c21d5d24e 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1312,6 +1312,8 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
 
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 47ac1a7d66e..04359ed64b8 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -137,6 +137,14 @@ static const struct hid_usage_entry hid_usage_table[] = {
     {0, 0x44, "BarrelSwitch"},
     {0, 0x45, "Eraser"},
     {0, 0x46, "TabletPick"},
+    {0, 0x47, "Confidence"},
+    {0, 0x48, "Width"},
+    {0, 0x49, "Height"},
+    {0, 0x51, "ContactID"},
+    {0, 0x52, "InputMode"},
+    {0, 0x53, "DeviceIndex"},
+    {0, 0x54, "ContactCount"},
+    {0, 0x55, "ContactMaximumNumber"},
   { 15, 0, "PhysicalInterfaceDevice" },
     {0, 0x00, "Undefined"},
     {0, 0x01, "Physical_Interface_Device"},
@@ -514,9 +522,11 @@ static const char *events[EV_MAX + 1] = {
 	[EV_FF_STATUS] = "ForceFeedbackStatus",
 };
 
-static const char *syncs[2] = {
+static const char *syncs[3] = {
 	[SYN_REPORT] = "Report",		[SYN_CONFIG] = "Config",
+	[SYN_MT_REPORT] = "MT Report",
 };
+
 static const char *keys[KEY_MAX + 1] = {
 	[KEY_RESERVED] = "Reserved",		[KEY_ESC] = "Esc",
 	[KEY_1] = "1",				[KEY_2] = "2",
@@ -734,8 +744,17 @@ static const char *absolutes[ABS_MAX + 1] = {
 	[ABS_HAT2Y] = "Hat2Y",		[ABS_HAT3X] = "Hat3X",
 	[ABS_HAT3Y] = "Hat 3Y",		[ABS_PRESSURE] = "Pressure",
 	[ABS_DISTANCE] = "Distance",	[ABS_TILT_X] = "XTilt",
-	[ABS_TILT_Y] = "YTilt",		[ABS_TOOL_WIDTH] = "Tool Width",
+	[ABS_TILT_Y] = "YTilt",		[ABS_TOOL_WIDTH] = "ToolWidth",
 	[ABS_VOLUME] = "Volume",	[ABS_MISC] = "Misc",
+	[ABS_MT_TOUCH_MAJOR] = "MTMajor",
+	[ABS_MT_TOUCH_MINOR] = "MTMinor",
+	[ABS_MT_WIDTH_MAJOR] = "MTMajorW",
+	[ABS_MT_WIDTH_MINOR] = "MTMinorW",
+	[ABS_MT_ORIENTATION] = "MTOrientation",
+	[ABS_MT_POSITION_X] = "MTPositionX",
+	[ABS_MT_POSITION_Y] = "MTPositionY",
+	[ABS_MT_TOOL_TYPE] = "MTToolType",
+	[ABS_MT_BLOB_ID] = "MTBlobID",
 };
 
 static const char *misc[MSC_MAX + 1] = {
diff --git a/drivers/hid/hid-drff.c b/drivers/hid/hid-drff.c
index 34f3eb65100..a239d20ad7a 100644
--- a/drivers/hid/hid-drff.c
+++ b/drivers/hid/hid-drff.c
@@ -32,6 +32,8 @@
 #include <linux/hid.h>
 
 #include "hid-ids.h"
+
+#ifdef CONFIG_DRAGONRISE_FF
 #include "usbhid/usbhid.h"
 
 struct drff_device {
@@ -135,6 +137,12 @@ static int drff_init(struct hid_device *hid)
 
 	return 0;
 }
+#else
+static inline int drff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
 
 static int dr_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hid-gaff.c b/drivers/hid/hid-gaff.c
index 510ad3ab8d3..8a11ccddaf2 100644
--- a/drivers/hid/hid-gaff.c
+++ b/drivers/hid/hid-gaff.c
@@ -31,6 +31,8 @@
 #include <linux/usb.h>
 #include <linux/hid.h>
 #include "hid-ids.h"
+
+#ifdef CONFIG_GREENASIA_FF
 #include "usbhid/usbhid.h"
 
 struct gaff_device {
@@ -130,6 +132,12 @@ static int gaff_init(struct hid_device *hid)
 
 	return 0;
 }
+#else
+static inline int gaff_init(struct hid_device *hdev)
+{
+	return 0;
+}
+#endif
 
 static int ga_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 4d5ee2bbc62..63010103792 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -414,8 +414,10 @@
 #define USB_DEVICE_ID_VERNIER_LCSPEC	0x0006
 
 #define USB_VENDOR_ID_WACOM		0x056a
+#define USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH	0x81
 
 #define USB_VENDOR_ID_WISEGROUP		0x0925
+#define USB_DEVICE_ID_SMARTJOY_PLUS	0x0005
 #define USB_DEVICE_ID_1_PHIDGETSERVO_20	0x8101
 #define USB_DEVICE_ID_4_PHIDGETSERVO_20	0x8104
 #define USB_DEVICE_ID_8_8_4_IF_KIT	0x8201
diff --git a/drivers/hid/hid-lgff.c b/drivers/hid/hid-lgff.c
index 51aff08e10c..56099709581 100644
--- a/drivers/hid/hid-lgff.c
+++ b/drivers/hid/hid-lgff.c
@@ -50,6 +50,12 @@ static const signed short ff_joystick[] = {
 	-1
 };
 
+static const signed short ff_joystick_ac[] = {
+	FF_CONSTANT,
+	FF_AUTOCENTER,
+	-1
+};
+
 static const signed short ff_wheel[] = {
 	FF_CONSTANT,
 	FF_AUTOCENTER,
@@ -60,8 +66,8 @@ static const struct dev_type devices[] = {
 	{ 0x046d, 0xc211, ff_rumble },
 	{ 0x046d, 0xc219, ff_rumble },
 	{ 0x046d, 0xc283, ff_joystick },
-	{ 0x046d, 0xc286, ff_joystick },
-	{ 0x046d, 0xc294, ff_joystick },
+	{ 0x046d, 0xc286, ff_joystick_ac },
+	{ 0x046d, 0xc294, ff_wheel },
 	{ 0x046d, 0xc295, ff_joystick },
 	{ 0x046d, 0xca03, ff_wheel },
 };
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index c5b252be9c2..75ed9d2c1a3 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -1,13 +1,8 @@
 /*
- *  HID driver for some ntrig "special" devices
+ *  HID driver for N-Trig touchscreens
  *
- *  Copyright (c) 1999 Andreas Gal
- *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
- *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- *  Copyright (c) 2006-2007 Jiri Kosina
- *  Copyright (c) 2007 Paul Walmsley
- *  Copyright (c) 2008 Jiri Slaby
  *  Copyright (c) 2008 Rafi Rubin
+ *  Copyright (c) 2009 Stephane Chatty
  *
  */
 
@@ -29,15 +24,79 @@
 #define nt_map_key_clear(c)	hid_map_usage_clear(hi, usage, bit, max, \
 					EV_KEY, (c))
 
+struct ntrig_data {
+	__s32 x, y, id, w, h;
+	char reading_a_point, found_contact_id;
+};
+
+/*
+ * this driver is aimed at two firmware versions in circulation:
+ *  - dual pen/finger single touch
+ *  - finger multitouch, pen not working
+ */
+
 static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
-	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_DIGITIZER &&
-			(usage->hid & 0xff) == 0x47) {
-		nt_map_key_clear(BTN_TOOL_DOUBLETAP);
-		return 1;
+	switch (usage->hid & HID_USAGE_PAGE) {
+
+	case HID_UP_GENDESK:
+		switch (usage->hid) {
+		case HID_GD_X:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_X);
+			input_set_abs_params(hi->input, ABS_X,
+					field->logical_minimum,
+					field->logical_maximum, 0, 0);
+			return 1;
+		case HID_GD_Y:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_Y);
+			input_set_abs_params(hi->input, ABS_Y,
+					field->logical_minimum,
+					field->logical_maximum, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case HID_UP_DIGITIZER:
+		switch (usage->hid) {
+		/* we do not want to map these for now */
+		case HID_DG_INVERT: /* value is always 0 */
+		case HID_DG_ERASER: /* value is always 0 */
+		case HID_DG_CONTACTID: /* value is useless */
+		case HID_DG_BARRELSWITCH:  /* doubtful */
+		case HID_DG_INPUTMODE:
+		case HID_DG_DEVICEINDEX:
+		case HID_DG_CONTACTCOUNT:
+		case HID_DG_CONTACTMAX:
+			return -1;
+
+		/* original mapping by Rafi Rubin */
+		case HID_DG_CONFIDENCE:
+			nt_map_key_clear(BTN_TOOL_DOUBLETAP);
+			return 1;
+
+		/* width/height mapped on TouchMajor/TouchMinor/Orientation */
+		case HID_DG_WIDTH:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOUCH_MAJOR);
+			return 1;
+		case HID_DG_HEIGHT:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOUCH_MINOR);
+			input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
+					0, 1, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case 0xff000000:
+		/* we do not want to map these: no input-oriented meaning */
+		return -1;
 	}
+
 	return 0;
 }
 
@@ -51,6 +110,138 @@ static int ntrig_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 
 	return 0;
 }
+
+/*
+ * this function is called upon all reports
+ * so that we can filter contact point information,
+ * decide whether we are in multi or single touch mode
+ * and call input_mt_sync after each point if necessary
+ */
+static int ntrig_event (struct hid_device *hid, struct hid_field *field,
+		                        struct hid_usage *usage, __s32 value)
+{
+	struct input_dev *input = field->hidinput->input;
+	struct ntrig_data *nd = hid_get_drvdata(hid);
+
+        if (hid->claimed & HID_CLAIMED_INPUT) {
+		switch (usage->hid) {
+		case HID_GD_X:
+			nd->x = value;
+			nd->reading_a_point = 1;
+			break;
+		case HID_GD_Y:
+			nd->y = value;
+			break;
+		case HID_DG_CONTACTID:
+			nd->id = value;
+			/* we receive this only when in multitouch mode */
+			nd->found_contact_id = 1;
+			break;
+		case HID_DG_WIDTH:
+			nd->w = value;
+			break;
+		case HID_DG_HEIGHT:
+			nd->h = value;
+			/*
+			 * when in single touch mode, this is the last
+			 * report received in a finger event. We want
+			 * to emit a normal (X, Y) position
+			 */
+			if (! nd->found_contact_id) {
+				input_event(input, EV_ABS, ABS_X, nd->x);
+				input_event(input, EV_ABS, ABS_Y, nd->y);
+			}
+			break;
+		case HID_DG_TIPPRESSURE:
+			/*
+			 * when in single touch mode, this is the last
+			 * report received in a pen event. We want
+			 * to emit a normal (X, Y) position
+			 */
+			if (! nd->found_contact_id) {
+				input_event(input, EV_ABS, ABS_X, nd->x);
+				input_event(input, EV_ABS, ABS_Y, nd->y);
+				input_event(input, EV_ABS, ABS_PRESSURE, value);
+			}
+			break;
+		case 0xff000002:
+			/*
+			 * we receive this when the device is in multitouch
+			 * mode. The first of the three values tagged with
+			 * this usage tells if the contact point is real
+			 * or a placeholder
+			 */
+			if (!nd->reading_a_point || value != 1)
+				break;
+			/* emit a normal (X, Y) for the first point only */
+			if (nd->id == 0) {
+				input_event(input, EV_ABS, ABS_X, nd->x);
+				input_event(input, EV_ABS, ABS_Y, nd->y);
+			}
+			input_event(input, EV_ABS, ABS_MT_POSITION_X, nd->x);
+			input_event(input, EV_ABS, ABS_MT_POSITION_Y, nd->y);
+			if (nd->w > nd->h) {
+				input_event(input, EV_ABS,
+						ABS_MT_ORIENTATION, 1);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MAJOR, nd->w);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MINOR, nd->h);
+			} else {
+				input_event(input, EV_ABS,
+						ABS_MT_ORIENTATION, 0);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MAJOR, nd->h);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MINOR, nd->w);
+			}
+			input_mt_sync(field->hidinput->input);
+			nd->reading_a_point = 0;
+			nd->found_contact_id = 0;
+			break;
+
+		default:
+			/* fallback to the generic hidinput handling */
+			return 0;
+		}
+	}
+
+	/* we have handled the hidinput part, now remains hiddev */
+        if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+                hid->hiddev_hid_event(hid, field, usage, value);
+
+	return 1;
+}
+
+static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct ntrig_data *nd;
+
+	nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL);
+	if (!nd) {
+		dev_err(&hdev->dev, "cannot allocate N-Trig data\n");
+		return -ENOMEM;
+	}
+	nd->reading_a_point = 0;
+	nd->found_contact_id = 0;
+	hid_set_drvdata(hdev, nd);
+
+	ret = hid_parse(hdev);
+	if (!ret)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	if (ret)
+		kfree (nd);
+	return ret;
+}
+
+static void ntrig_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+}
+
 static const struct hid_device_id ntrig_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN),
 		.driver_data = NTRIG_DUPLICATE_USAGES },
@@ -58,11 +249,20 @@ static const struct hid_device_id ntrig_devices[] = {
 };
 MODULE_DEVICE_TABLE(hid, ntrig_devices);
 
+static const struct hid_usage_id ntrig_grabbed_usages[] = {
+	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
 static struct hid_driver ntrig_driver = {
 	.name = "ntrig",
 	.id_table = ntrig_devices,
+	.probe = ntrig_probe,
+	.remove = ntrig_remove,
 	.input_mapping = ntrig_input_mapping,
 	.input_mapped = ntrig_input_mapped,
+	.usage_table = ntrig_grabbed_usages,
+	.event = ntrig_event,
 };
 
 static int ntrig_init(void)
diff --git a/drivers/hid/hid-sjoy.c b/drivers/hid/hid-sjoy.c
new file mode 100644
index 00000000000..eab169e5c37
--- /dev/null
+++ b/drivers/hid/hid-sjoy.c
@@ -0,0 +1,180 @@
+/*
+ *  Force feedback support for SmartJoy PLUS PS2->USB adapter
+ *
+ *  Copyright (c) 2009 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ *
+ *  Based of hid-pl.c and hid-gaff.c
+ *   Copyright (c) 2007, 2009 Anssi Hannula <anssi.hannula@gmail.com>
+ *   Copyright (c) 2008 Lukasz Lubojanski <lukasz@lubojanski.info>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+#include "hid-ids.h"
+
+#ifdef CONFIG_SMARTJOYPLUS_FF
+#include "usbhid/usbhid.h"
+
+struct sjoyff_device {
+	struct hid_report *report;
+};
+
+static int hid_sjoyff_play(struct input_dev *dev, void *data,
+			 struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct sjoyff_device *sjoyff = data;
+	u32 left, right;
+
+	left = effect->u.rumble.strong_magnitude;
+	right = effect->u.rumble.weak_magnitude;
+	dev_dbg(&dev->dev, "called with 0x%08x 0x%08x\n", left, right);
+
+	left = left * 0xff / 0xffff;
+	right = (right != 0); /* on/off only */
+
+	sjoyff->report->field[0]->value[1] = right;
+	sjoyff->report->field[0]->value[2] = left;
+	dev_dbg(&dev->dev, "running with 0x%02x 0x%02x\n", left, right);
+	usbhid_submit_report(hid, sjoyff->report, USB_DIR_OUT);
+
+	return 0;
+}
+
+static int sjoyff_init(struct hid_device *hid)
+{
+	struct sjoyff_device *sjoyff;
+	struct hid_report *report;
+	struct hid_input *hidinput = list_entry(hid->inputs.next,
+						struct hid_input, list);
+	struct list_head *report_list =
+			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct list_head *report_ptr = report_list;
+	struct input_dev *dev;
+	int error;
+
+	if (list_empty(report_list)) {
+		dev_err(&hid->dev, "no output reports found\n");
+		return -ENODEV;
+	}
+
+	report_ptr = report_ptr->next;
+
+	if (report_ptr == report_list) {
+		dev_err(&hid->dev, "required output report is "
+				"missing\n");
+		return -ENODEV;
+	}
+
+	report = list_entry(report_ptr, struct hid_report, list);
+	if (report->maxfield < 1) {
+		dev_err(&hid->dev, "no fields in the report\n");
+		return -ENODEV;
+	}
+
+	if (report->field[0]->report_count < 3) {
+		dev_err(&hid->dev, "not enough values in the field\n");
+		return -ENODEV;
+	}
+
+	sjoyff = kzalloc(sizeof(struct sjoyff_device), GFP_KERNEL);
+	if (!sjoyff)
+		return -ENOMEM;
+
+	dev = hidinput->input;
+
+	set_bit(FF_RUMBLE, dev->ffbit);
+
+	error = input_ff_create_memless(dev, sjoyff, hid_sjoyff_play);
+	if (error) {
+		kfree(sjoyff);
+		return error;
+	}
+
+	sjoyff->report = report;
+	sjoyff->report->field[0]->value[0] = 0x01;
+	sjoyff->report->field[0]->value[1] = 0x00;
+	sjoyff->report->field[0]->value[2] = 0x00;
+	usbhid_submit_report(hid, sjoyff->report, USB_DIR_OUT);
+
+	dev_info(&hid->dev,
+		"Force feedback for SmartJoy PLUS PS2/USB adapter\n");
+
+	return 0;
+}
+#else
+static inline int sjoyff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
+
+static int sjoy_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		dev_err(&hdev->dev, "parse failed\n");
+		goto err;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+	if (ret) {
+		dev_err(&hdev->dev, "hw start failed\n");
+		goto err;
+	}
+
+	sjoyff_init(hdev);
+
+	return 0;
+err:
+	return ret;
+}
+
+static const struct hid_device_id sjoy_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, sjoy_devices);
+
+static struct hid_driver sjoy_driver = {
+	.name = "smartjoyplus",
+	.id_table = sjoy_devices,
+	.probe = sjoy_probe,
+};
+
+static int sjoy_init(void)
+{
+	return hid_register_driver(&sjoy_driver);
+}
+
+static void sjoy_exit(void)
+{
+	hid_unregister_driver(&sjoy_driver);
+}
+
+module_init(sjoy_init);
+module_exit(sjoy_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jussi Kivilinna");
+
diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c
index 7c1f7b50330..fcd6ccd02fe 100644
--- a/drivers/hid/hid-tmff.c
+++ b/drivers/hid/hid-tmff.c
@@ -33,11 +33,6 @@
 
 #include "hid-ids.h"
 
-#include "usbhid/usbhid.h"
-
-/* Usages for thrustmaster devices I know about */
-#define THRUSTMASTER_USAGE_FF	(HID_UP_GENDESK | 0xbb)
-
 static const signed short ff_rumble[] = {
 	FF_RUMBLE,
 	-1
@@ -48,6 +43,12 @@ static const signed short ff_joystick[] = {
 	-1
 };
 
+#ifdef CONFIG_THRUSTMASTER_FF
+#include "usbhid/usbhid.h"
+
+/* Usages for thrustmaster devices I know about */
+#define THRUSTMASTER_USAGE_FF	(HID_UP_GENDESK | 0xbb)
+
 struct tmff_device {
 	struct hid_report *report;
 	struct hid_field *ff_field;
@@ -209,6 +210,12 @@ fail:
 	kfree(tmff);
 	return error;
 }
+#else
+static inline int tmff_init(struct hid_device *hid, const signed short *ff_bits)
+{
+	return 0;
+}
+#endif
 
 static int tm_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
new file mode 100644
index 00000000000..1f9237f511e
--- /dev/null
+++ b/drivers/hid/hid-wacom.c
@@ -0,0 +1,259 @@
+/*
+ *  Bluetooth Wacom Tablet support
+ *
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ *  Copyright (c) 2006-2007 Jiri Kosina
+ *  Copyright (c) 2007 Paul Walmsley
+ *  Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com>
+ *  Copyright (c) 2006 Andrew Zabolotny <zap@homelink.ru>
+ *  Copyright (c) 2009 Bastien Nocera <hadess@hadess.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+struct wacom_data {
+	__u16 tool;
+	unsigned char butstate;
+};
+
+static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
+		u8 *raw_data, int size)
+{
+	struct wacom_data *wdata = hid_get_drvdata(hdev);
+	struct hid_input *hidinput;
+	struct input_dev *input;
+	unsigned char *data = (unsigned char *) raw_data;
+	int tool, x, y, rw;
+
+	if (!(hdev->claimed & HID_CLAIMED_INPUT))
+		return 0;
+
+	tool = 0;
+	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
+	input = hidinput->input;
+
+	/* Check if this is a tablet report */
+	if (data[0] != 0x03)
+		return 0;
+
+	/* Get X & Y positions */
+	x = le16_to_cpu(*(__le16 *) &data[2]);
+	y = le16_to_cpu(*(__le16 *) &data[4]);
+
+	/* Get current tool identifier */
+	if (data[1] & 0x90) { /* If pen is in the in/active area */
+		switch ((data[1] >> 5) & 3) {
+		case 0:	/* Pen */
+			tool = BTN_TOOL_PEN;
+			break;
+
+		case 1: /* Rubber */
+			tool = BTN_TOOL_RUBBER;
+			break;
+
+		case 2: /* Mouse with wheel */
+		case 3: /* Mouse without wheel */
+			tool = BTN_TOOL_MOUSE;
+			break;
+		}
+
+		/* Reset tool if out of active tablet area */
+		if (!(data[1] & 0x10))
+			tool = 0;
+	}
+
+	/* If tool changed, notify input subsystem */
+	if (wdata->tool != tool) {
+		if (wdata->tool) {
+			/* Completely reset old tool state */
+			if (wdata->tool == BTN_TOOL_MOUSE) {
+				input_report_key(input, BTN_LEFT, 0);
+				input_report_key(input, BTN_RIGHT, 0);
+				input_report_key(input, BTN_MIDDLE, 0);
+				input_report_abs(input, ABS_DISTANCE,
+						input->absmax[ABS_DISTANCE]);
+			} else {
+				input_report_key(input, BTN_TOUCH, 0);
+				input_report_key(input, BTN_STYLUS, 0);
+				input_report_key(input, BTN_STYLUS2, 0);
+				input_report_abs(input, ABS_PRESSURE, 0);
+			}
+			input_report_key(input, wdata->tool, 0);
+			input_sync(input);
+		}
+		wdata->tool = tool;
+		if (tool)
+			input_report_key(input, tool, 1);
+	}
+
+	if (tool) {
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+
+		switch ((data[1] >> 5) & 3) {
+		case 2: /* Mouse with wheel */
+			input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
+			rw = (data[6] & 0x01) ? -1 :
+				(data[6] & 0x02) ? 1 : 0;
+			input_report_rel(input, REL_WHEEL, rw);
+			/* fall through */
+
+		case 3: /* Mouse without wheel */
+			input_report_key(input, BTN_LEFT, data[1] & 0x01);
+			input_report_key(input, BTN_RIGHT, data[1] & 0x02);
+			/* Compute distance between mouse and tablet */
+			rw = 44 - (data[6] >> 2);
+			if (rw < 0)
+				rw = 0;
+			else if (rw > 31)
+				rw = 31;
+			input_report_abs(input, ABS_DISTANCE, rw);
+			break;
+
+		default:
+			input_report_abs(input, ABS_PRESSURE,
+					data[6] | (((__u16) (data[1] & 0x08)) << 5));
+			input_report_key(input, BTN_TOUCH, data[1] & 0x01);
+			input_report_key(input, BTN_STYLUS, data[1] & 0x02);
+			input_report_key(input, BTN_STYLUS2, (tool == BTN_TOOL_PEN) && data[1] & 0x04);
+			break;
+		}
+
+		input_sync(input);
+	}
+
+	/* Report the state of the two buttons at the top of the tablet
+	 * as two extra fingerpad keys (buttons 4 & 5). */
+	rw = data[7] & 0x03;
+	if (rw != wdata->butstate) {
+		wdata->butstate = rw;
+		input_report_key(input, BTN_0, rw & 0x02);
+		input_report_key(input, BTN_1, rw & 0x01);
+		input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
+		input_sync(input);
+	}
+
+	return 1;
+}
+
+static int wacom_probe(struct hid_device *hdev,
+		const struct hid_device_id *id)
+{
+	struct hid_input *hidinput;
+	struct input_dev *input;
+	struct wacom_data *wdata;
+	int ret;
+
+	wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
+	if (wdata == NULL) {
+		dev_err(&hdev->dev, "can't alloc wacom descriptor\n");
+		return -ENOMEM;
+	}
+
+	hid_set_drvdata(hdev, wdata);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		dev_err(&hdev->dev, "parse failed\n");
+		goto err_free;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		dev_err(&hdev->dev, "hw start failed\n");
+		goto err_free;
+	}
+
+	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
+	input = hidinput->input;
+
+	/* Basics */
+	input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
+	input->absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) |
+		BIT(ABS_PRESSURE) | BIT(ABS_DISTANCE);
+	input->relbit[0] |= BIT(REL_WHEEL);
+	set_bit(BTN_TOOL_PEN, input->keybit);
+	set_bit(BTN_TOUCH, input->keybit);
+	set_bit(BTN_STYLUS, input->keybit);
+	set_bit(BTN_STYLUS2, input->keybit);
+	set_bit(BTN_LEFT, input->keybit);
+	set_bit(BTN_RIGHT, input->keybit);
+	set_bit(BTN_MIDDLE, input->keybit);
+
+	/* Pad */
+	input->evbit[0] |= BIT(EV_MSC);
+	input->mscbit[0] |= BIT(MSC_SERIAL);
+
+	/* Distance, rubber and mouse */
+	input->absbit[0] |= BIT(ABS_DISTANCE);
+	set_bit(BTN_TOOL_RUBBER, input->keybit);
+	set_bit(BTN_TOOL_MOUSE, input->keybit);
+
+	input->absmax[ABS_PRESSURE] = 511;
+	input->absmax[ABS_DISTANCE] = 32;
+
+	input->absmax[ABS_X] = 16704;
+	input->absmax[ABS_Y] = 12064;
+	input->absfuzz[ABS_X] = 4;
+	input->absfuzz[ABS_Y] = 4;
+
+	return 0;
+err_free:
+	kfree(wdata);
+	return ret;
+}
+
+static void wacom_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+}
+
+static const struct hid_device_id wacom_devices[] = {
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
+
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, wacom_devices);
+
+static struct hid_driver wacom_driver = {
+	.name = "wacom",
+	.id_table = wacom_devices,
+	.probe = wacom_probe,
+	.remove = wacom_remove,
+	.raw_event = wacom_raw_event,
+};
+
+static int wacom_init(void)
+{
+	int ret;
+
+	ret = hid_register_driver(&wacom_driver);
+	if (ret)
+		printk(KERN_ERR "can't register wacom driver\n");
+	printk(KERN_ERR "wacom driver registered\n");
+	return ret;
+}
+
+static void wacom_exit(void)
+{
+	hid_unregister_driver(&wacom_driver);
+}
+
+module_init(wacom_init);
+module_exit(wacom_exit);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/hid/hid-zpff.c b/drivers/hid/hid-zpff.c
index 85a198a1853..57f710757bf 100644
--- a/drivers/hid/hid-zpff.c
+++ b/drivers/hid/hid-zpff.c
@@ -27,6 +27,7 @@
 
 #include "hid-ids.h"
 
+#ifdef CONFIG_ZEROPLUS_FF
 #include "usbhid/usbhid.h"
 
 struct zpff_device {
@@ -108,6 +109,12 @@ static int zpff_init(struct hid_device *hid)
 
 	return 0;
 }
+#else
+static inline int zpff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
 
 static int zp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 00ccf4b1985..0c6639ea03d 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -349,10 +349,7 @@ int hidraw_connect(struct hid_device *hid)
 	int minor, result;
 	struct hidraw *dev;
 
-	/* TODO currently we accept any HID device. This should later
-	 * probably be fixed to accept only those devices which provide
-	 * non-input applications
-	 */
+	/* we accept any HID device, no matter the applications */
 
 	dev = kzalloc(sizeof(struct hidraw), GFP_KERNEL);
 	if (!dev)
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index ac8049b5f1e..76c4bbe9dcc 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -1234,12 +1234,11 @@ static int hid_post_reset(struct usb_interface *intf)
 	struct hid_device *hid = usb_get_intfdata(intf);
 	struct usbhid_device *usbhid = hid->driver_data;
 	int status;
- 
+
 	spin_lock_irq(&usbhid->lock);
 	clear_bit(HID_RESET_PENDING, &usbhid->iofl);
 	spin_unlock_irq(&usbhid->lock);
 	hid_set_idle(dev, intf->cur_altsetting->desc.bInterfaceNumber, 0, 0);
-	/* FIXME: Any more reinitialization needed? */
 	status = hid_start_in(hid);
 	if (status < 0)
 		hid_io_error(hid);
@@ -1251,14 +1250,14 @@ static int hid_post_reset(struct usb_interface *intf)
 int usbhid_get_power(struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
- 
+
 	return usb_autopm_get_interface(usbhid->intf);
 }
 
 void usbhid_put_power(struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
- 
+
 	usb_autopm_put_interface(usbhid->intf);
 }
 
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index acc7143d965..035a6c7e59d 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,10 +34,24 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
+
+/*
+ * I2C register offsets will be shifted 0 or 1 bit left, depending on
+ * different SoCs
+ */
+#define REG_SHIFT_0	(0 << 0)
+#define REG_SHIFT_1	(1 << 0)
+#define REG_SHIFT(d)	((d) & 0x1)
+
+static const struct platform_device_id i2c_pxa_id_table[] = {
+	{ "pxa2xx-i2c",		REG_SHIFT_1 },
+	{ "pxa3xx-pwri2c",	REG_SHIFT_0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
 
 /*
  * I2C registers and bit definitions
@@ -985,6 +999,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	struct pxa_i2c *i2c;
 	struct resource *res;
 	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+	struct platform_device_id *id = platform_get_device_id(dev);
 	int ret;
 	int irq;
 
@@ -1028,7 +1043,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		ret = -EIO;
 		goto eremap;
 	}
-	i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1;
+	i2c->reg_shift = REG_SHIFT(id->driver_data);
 
 	i2c->iobase = res->start;
 	i2c->iosize = res_len(res);
@@ -1150,6 +1165,7 @@ static struct platform_driver i2c_pxa_driver = {
 		.name	= "pxa2xx-i2c",
 		.owner	= THIS_MODULE,
 	},
+	.id_table	= i2c_pxa_id_table,
 };
 
 static int __init i2c_adap_pxa_init(void)
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index cf06494bb74..9a5d0aaac9d 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -46,7 +46,7 @@ menuconfig IDE
 	  SMART parameters from disk drives.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ide-core.ko.
+	  module will be called ide-core.
 
 	  For further information, please read <file:Documentation/ide/ide.txt>.
 
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index bbdd2547f12..702ef64a0f1 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -577,7 +577,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 
 		/*
 		 * If necessary schedule the packet transfer to occur 'timeout'
-		 * miliseconds later in ide_delayed_transfer_pc() after the
+		 * milliseconds later in ide_delayed_transfer_pc() after the
 		 * device says it's ready for a packet.
 		 */
 		if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5c0a631d145..06f46fcc077 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -232,7 +232,7 @@ config INPUT_GPIO_ROTARY_ENCODER
 	depends on GPIOLIB && GENERIC_GPIO
 	help
 	  Say Y here to add support for rotary encoders connected to GPIO lines.
-	  Check file:Documentation/incput/rotary_encoder.txt for more
+	  Check file:Documentation/input/rotary-encoder.txt for more
 	  information.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index a28c06d686e..89b394183a7 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -135,7 +135,7 @@ static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
 	io->dev.parent	= &dev->dev;
 
 	kmi->io 	= io;
-	kmi->base	= ioremap(dev->res.start, KMI_SIZE);
+	kmi->base	= ioremap(dev->res.start, resource_size(&dev->res));
 	if (!kmi->base) {
 		ret = -ENOMEM;
 		goto out;
diff --git a/drivers/isdn/divert/isdn_divert.c b/drivers/isdn/divert/isdn_divert.c
index 7d97d54588d..77e9fdda059 100644
--- a/drivers/isdn/divert/isdn_divert.c
+++ b/drivers/isdn/divert/isdn_divert.c
@@ -183,7 +183,7 @@ int cf_command(int drvid, int mode,
           (mode != 1) ? "" : " 0 ",
           (mode != 1) ? "" : fwd_nr);
  
-  retval = divert_if.ll_cmd(&cs->ics); /* excute command */
+  retval = divert_if.ll_cmd(&cs->ics); /* execute command */
 
   if (!retval)
    { cs->prev = NULL;
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 3083338716b..47dbfe298b4 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -502,7 +502,7 @@ tone_off:
 			break;
 		}
 		dsp->cmx_delay = (*((int *)data)) << 3;
-			/* miliseconds to samples */
+			/* milliseconds to samples */
 		if (dsp->cmx_delay >= (CMX_BUFF_HALF>>1))
 			/* clip to half of maximum usable buffer
 			(half of half buffer) */
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 1aa46a390a0..173d104d9ff 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -16,6 +16,8 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
+
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index aa2e7ae0cda..aa7acf3b922 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 60955a70d88..1bb66e1ed5a 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -216,7 +216,7 @@ config DVB_USB_TTUSB2
 	help
 	  Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
 	  firmware protocol used by this module is similar to the one used by the
-	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko.
+	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
 
 config DVB_USB_DTT200U
 	tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9d48da2fb01..57835f5715f 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -758,10 +758,14 @@ config VIDEO_MX1
 	---help---
 	  This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
 
+config MX3_VIDEO
+	bool
+
 config VIDEO_MX3
 	tristate "i.MX3x Camera Sensor Interface driver"
 	depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
 	select VIDEOBUF_DMA_CONTIG
+	select MX3_VIDEO
 	---help---
 	  This is a v4l2 driver for the i.MX3x Camera Sensor Interface
 
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 3e6ffee8dfe..ccd47f57f42 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -181,7 +181,7 @@ static int hdpvr_submit_buffers(struct hdpvr_device *dev)
 				 buff_list);
 		if (buf->status != BUFSTAT_AVAILABLE) {
 			v4l2_err(&dev->v4l2_dev,
-				 "buffer not marked as availbale\n");
+				 "buffer not marked as available\n");
 			ret = -EFAULT;
 			goto err;
 		}
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index 693e4b51135..fa9249b4971 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -130,7 +130,7 @@ mpi_ioc.h
  *  08-08-01  01.02.01  Original release for v1.2 work.
  *                      New format for FWVersion and ProductId in
  *                      MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
- *  08-31-01  01.02.02  Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
+ *  08-31-01  01.02.02  Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
  *                      related structure and defines.
  *                      Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
  *                      Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
@@ -190,7 +190,7 @@ mpi_ioc.h
  *  10-11-06  01.05.12  Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
  *                      Added MaxInitiators field to PortFacts reply.
  *                      Added SAS Device Status Change ReasonCode for
- *                      asynchronous notificaiton.
+ *                      asynchronous notification.
  *                      Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
  *                      data structure.
  *                      Added new ImageType values for FWDownload and FWUpload
@@ -623,7 +623,7 @@ mpi_fc.h
  *  11-02-00  01.01.01  Original release for post 1.0 work
  *  12-04-00  01.01.02  Added messages for Common Transport Send and
  *                      Primitive Send.
- *  01-09-01  01.01.03  Modifed some of the new flags to have an MPI prefix
+ *  01-09-01  01.01.03  Modified some of the new flags to have an MPI prefix
  *                      and modified the FcPrimitiveSend flags.
  *  01-25-01  01.01.04  Move InitiatorIndex in LinkServiceRsp reply to a larger
  *                      field.
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 44b93150445..0df065275cd 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1023,8 +1023,7 @@ mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
 }
 
 /**
- *	mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr
- *	(1078 workaround).
+ *	mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
  *	@pAddr: virtual address for SGE
  *	@flagslength: SGE flags and data transfer length
  *	@dma_addr: Physical address
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 024e8305bcf..8440f78f696 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2675,8 +2675,8 @@ mptscsih_timer_expired(unsigned long data)
 /**
  *	mptscsih_get_completion_code -
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	@reply:
- *	@cmd:
+ *	@req: Pointer to original MPT request frame
+ *	@reply: Pointer to MPT reply frame (NULL if TurboReply)
  *
  **/
 static int
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index e9f4323dd2c..875f7a87573 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -108,6 +108,10 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc)
 
 /*--------------------------------------------------------------------------*/
 
+static const struct tmio_mmc_data t7166xb_mmc_data = {
+	.hclk = 24000000,
+};
+
 static const struct resource t7l66xb_mmc_resources[] = {
 	{
 		.start = 0x800,
@@ -149,6 +153,7 @@ static struct mfd_cell t7l66xb_cells[] = {
 		.name = "tmio-mmc",
 		.enable = t7l66xb_mmc_enable,
 		.disable = t7l66xb_mmc_disable,
+		.driver_data = &t7166xb_mmc_data,
 		.num_resources = ARRAY_SIZE(t7l66xb_mmc_resources),
 		.resources = t7l66xb_mmc_resources,
 	},
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index 43222c12fec..c3993ac2054 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -75,6 +75,10 @@ static int tc6387xb_mmc_disable(struct platform_device *mmc)
 
 /*--------------------------------------------------------------------------*/
 
+const static struct tmio_mmc_data tc6387xb_mmc_data = {
+	.hclk = 24000000,
+};
+
 static struct resource tc6387xb_mmc_resources[] = {
 	{
 		.start = 0x800,
@@ -98,6 +102,7 @@ static struct mfd_cell tc6387xb_cells[] = {
 		.name = "tmio-mmc",
 		.enable = tc6387xb_mmc_enable,
 		.disable = tc6387xb_mmc_disable,
+		.driver_data = &tc6387xb_mmc_data,
 		.num_resources = ARRAY_SIZE(tc6387xb_mmc_resources),
 		.resources = tc6387xb_mmc_resources,
 	},
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 77a12fc8045..9d2abb5d6e2 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -136,6 +136,10 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
 	return 0;
 }
 
+const static struct tmio_mmc_data tc6393xb_mmc_data = {
+	.hclk = 24000000,
+};
+
 static struct resource __devinitdata tc6393xb_nand_resources[] = {
 	{
 		.start	= 0x1000,
@@ -351,6 +355,7 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = {
 	},
 	[TC6393XB_CELL_MMC] = {
 		.name = "tmio-mmc",
+		.driver_data = &tc6393xb_mmc_data,
 		.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
 		.resources = tc6393xb_mmc_resources,
 	},
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 6d1ac180f6e..68ab39d7cb3 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -235,5 +235,6 @@ config ISL29003
 
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
+source "drivers/misc/cb710/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7871f05dcb9..36f733cd60e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
 obj-$(CONFIG_C2PORT)		+= c2port/
 obj-y				+= eeprom/
+obj-y				+= cb710/
diff --git a/drivers/misc/cb710/Kconfig b/drivers/misc/cb710/Kconfig
new file mode 100644
index 00000000000..22429b8b106
--- /dev/null
+++ b/drivers/misc/cb710/Kconfig
@@ -0,0 +1,25 @@
+config CB710_CORE
+	tristate "ENE CB710/720 Flash memory card reader support"
+	depends on PCI
+	help
+	  This option enables support for PCI ENE CB710/720 Flash memory card
+	  reader found in some laptops (ie. some versions of HP Compaq nx9500).
+
+	  You will also have to select some flash card format drivers (MMC/SD,
+	  MemoryStick).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called cb710.
+
+config CB710_DEBUG
+	bool "Enable driver debugging"
+	depends on CB710_CORE != n
+	default n
+	help
+	  This is an option for use by developers; most people should
+	  say N here.  This adds a lot of debugging output to dmesg.
+
+config CB710_DEBUG_ASSUMPTIONS
+	bool
+	depends on CB710_CORE != n
+	default y
diff --git a/drivers/misc/cb710/Makefile b/drivers/misc/cb710/Makefile
new file mode 100644
index 00000000000..7b80cbf1a60
--- /dev/null
+++ b/drivers/misc/cb710/Makefile
@@ -0,0 +1,8 @@
+ifeq ($(CONFIG_CB710_DEBUG),y)
+	EXTRA_CFLAGS		+= -DDEBUG
+endif
+
+obj-$(CONFIG_CB710_CORE)	+= cb710.o
+
+cb710-y				:= core.o sgbuf2.o
+cb710-$(CONFIG_CB710_DEBUG)	+= debug.o
diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c
new file mode 100644
index 00000000000..b14eab0f2ba
--- /dev/null
+++ b/drivers/misc/cb710/core.c
@@ -0,0 +1,357 @@
+/*
+ *  cb710/core.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/cb710.h>
+
+static DEFINE_IDA(cb710_ida);
+static DEFINE_SPINLOCK(cb710_ida_lock);
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+	int reg, uint32_t mask, uint32_t xor)
+{
+	u32 rval;
+
+	pci_read_config_dword(pdev, reg, &rval);
+	rval = (rval & mask) ^ xor;
+	pci_write_config_dword(pdev, reg, rval);
+}
+EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg);
+
+/* Some magic writes based on Windows driver init code */
+static int __devinit cb710_pci_configure(struct pci_dev *pdev)
+{
+	unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
+	struct pci_dev *pdev0 = pci_get_slot(pdev->bus, devfn);
+	u32 val;
+
+	cb710_pci_update_config_reg(pdev, 0x48,
+		~0x000000FF, 0x0000003F);
+
+	pci_read_config_dword(pdev, 0x48, &val);
+	if (val & 0x80000000)
+		return 0;
+
+	if (!pdev0)
+		return -ENODEV;
+
+	if (pdev0->vendor == PCI_VENDOR_ID_ENE
+	    && pdev0->device == PCI_DEVICE_ID_ENE_720) {
+		cb710_pci_update_config_reg(pdev0, 0x8C,
+			~0x00F00000, 0x00100000);
+		cb710_pci_update_config_reg(pdev0, 0xB0,
+			~0x08000000, 0x08000000);
+	}
+
+	cb710_pci_update_config_reg(pdev0, 0x8C,
+		~0x00000F00, 0x00000200);
+	cb710_pci_update_config_reg(pdev0, 0x90,
+		~0x00060000, 0x00040000);
+
+	pci_dev_put(pdev0);
+
+	return 0;
+}
+
+static irqreturn_t cb710_irq_handler(int irq, void *data)
+{
+	struct cb710_chip *chip = data;
+	struct cb710_slot *slot = &chip->slot[0];
+	irqreturn_t handled = IRQ_NONE;
+	unsigned nr;
+
+	spin_lock(&chip->irq_lock); /* incl. smp_rmb() */
+
+	for (nr = chip->slots; nr; ++slot, --nr) {
+		cb710_irq_handler_t handler_func = slot->irq_handler;
+		if (handler_func && handler_func(slot))
+			handled = IRQ_HANDLED;
+	}
+
+	spin_unlock(&chip->irq_lock);
+
+	return handled;
+}
+
+static void cb710_release_slot(struct device *dev)
+{
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	struct cb710_slot *slot = cb710_pdev_to_slot(to_platform_device(dev));
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+
+	/* slot struct can be freed now */
+	atomic_dec(&chip->slot_refs_count);
+#endif
+}
+
+static int __devinit cb710_register_slot(struct cb710_chip *chip,
+	unsigned slot_mask, unsigned io_offset, const char *name)
+{
+	int nr = chip->slots;
+	struct cb710_slot *slot = &chip->slot[nr];
+	int err;
+
+	dev_dbg(cb710_chip_dev(chip),
+		"register: %s.%d; slot %d; mask %d; IO offset: 0x%02X\n",
+		name, chip->platform_id, nr, slot_mask, io_offset);
+
+	/* slot->irq_handler == NULL here; this needs to be
+	 * seen before platform_device_register() */
+	++chip->slots;
+	smp_wmb();
+
+	slot->iobase = chip->iobase + io_offset;
+	slot->pdev.name = name;
+	slot->pdev.id = chip->platform_id;
+	slot->pdev.dev.parent = &chip->pdev->dev;
+	slot->pdev.dev.release = cb710_release_slot;
+
+	err = platform_device_register(&slot->pdev);
+
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	atomic_inc(&chip->slot_refs_count);
+#endif
+
+	if (err) {
+		/* device_initialize() called from platform_device_register()
+		 * wants this on error path */
+		platform_device_put(&slot->pdev);
+
+		/* slot->irq_handler == NULL here anyway, so no lock needed */
+		--chip->slots;
+		return err;
+	}
+
+	chip->slot_mask |= slot_mask;
+
+	return 0;
+}
+
+static void cb710_unregister_slot(struct cb710_chip *chip,
+	unsigned slot_mask)
+{
+	int nr = chip->slots - 1;
+
+	if (!(chip->slot_mask & slot_mask))
+		return;
+
+	platform_device_unregister(&chip->slot[nr].pdev);
+
+	/* complementary to spin_unlock() in cb710_set_irq_handler() */
+	smp_rmb();
+	BUG_ON(chip->slot[nr].irq_handler != NULL);
+
+	/* slot->irq_handler == NULL here, so no lock needed */
+	--chip->slots;
+	chip->slot_mask &= ~slot_mask;
+}
+
+void cb710_set_irq_handler(struct cb710_slot *slot,
+	cb710_irq_handler_t handler)
+{
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+	slot->irq_handler = handler;
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+}
+EXPORT_SYMBOL_GPL(cb710_set_irq_handler);
+
+#ifdef CONFIG_PM
+
+static int cb710_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct cb710_chip *chip = pci_get_drvdata(pdev);
+
+	free_irq(pdev->irq, chip);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	if (state.event & PM_EVENT_SLEEP)
+		pci_set_power_state(pdev, PCI_D3cold);
+	return 0;
+}
+
+static int cb710_resume(struct pci_dev *pdev)
+{
+	struct cb710_chip *chip = pci_get_drvdata(pdev);
+	int err;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	err = pcim_enable_device(pdev);
+	if (err)
+		return err;
+
+	return devm_request_irq(&pdev->dev, pdev->irq,
+		cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
+}
+
+#endif /* CONFIG_PM */
+
+static int __devinit cb710_probe(struct pci_dev *pdev,
+	const struct pci_device_id *ent)
+{
+	struct cb710_chip *chip;
+	unsigned long flags;
+	u32 val;
+	int err;
+	int n = 0;
+
+	err = cb710_pci_configure(pdev);
+	if (err)
+		return err;
+
+	/* this is actually magic... */
+	pci_read_config_dword(pdev, 0x48, &val);
+	if (!(val & 0x80000000)) {
+		pci_write_config_dword(pdev, 0x48, val|0x71000000);
+		pci_read_config_dword(pdev, 0x48, &val);
+	}
+
+	dev_dbg(&pdev->dev, "PCI config[0x48] = 0x%08X\n", val);
+	if (!(val & 0x70000000))
+		return -ENODEV;
+	val = (val >> 28) & 7;
+	if (val & CB710_SLOT_MMC)
+		++n;
+	if (val & CB710_SLOT_MS)
+		++n;
+	if (val & CB710_SLOT_SM)
+		++n;
+
+	chip = devm_kzalloc(&pdev->dev,
+		sizeof(*chip) + n * sizeof(*chip->slot), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	err = pcim_enable_device(pdev);
+	if (err)
+		return err;
+
+	err = pcim_iomap_regions(pdev, 0x0001, KBUILD_MODNAME);
+	if (err)
+		return err;
+
+	chip->pdev = pdev;
+	chip->iobase = pcim_iomap_table(pdev)[0];
+
+	pci_set_drvdata(pdev, chip);
+
+	err = devm_request_irq(&pdev->dev, pdev->irq,
+		cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
+	if (err)
+		return err;
+
+	do {
+		if (!ida_pre_get(&cb710_ida, GFP_KERNEL))
+			return -ENOMEM;
+
+		spin_lock_irqsave(&cb710_ida_lock, flags);
+		err = ida_get_new(&cb710_ida, &chip->platform_id);
+		spin_unlock_irqrestore(&cb710_ida_lock, flags);
+
+		if (err && err != -EAGAIN)
+			return err;
+	} while (err);
+
+
+	dev_info(&pdev->dev, "id %d, IO 0x%p, IRQ %d\n",
+		chip->platform_id, chip->iobase, pdev->irq);
+
+	if (val & CB710_SLOT_MMC) {	/* MMC/SD slot */
+		err = cb710_register_slot(chip,
+			CB710_SLOT_MMC, 0x00, "cb710-mmc");
+		if (err)
+			return err;
+	}
+
+	if (val & CB710_SLOT_MS) {	/* MemoryStick slot */
+		err = cb710_register_slot(chip,
+			CB710_SLOT_MS, 0x40, "cb710-ms");
+		if (err)
+			goto unreg_mmc;
+	}
+
+	if (val & CB710_SLOT_SM) {	/* SmartMedia slot */
+		err = cb710_register_slot(chip,
+			CB710_SLOT_SM, 0x60, "cb710-sm");
+		if (err)
+			goto unreg_ms;
+	}
+
+	return 0;
+unreg_ms:
+	cb710_unregister_slot(chip, CB710_SLOT_MS);
+unreg_mmc:
+	cb710_unregister_slot(chip, CB710_SLOT_MMC);
+
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
+#endif
+	return err;
+}
+
+static void __devexit cb710_remove_one(struct pci_dev *pdev)
+{
+	struct cb710_chip *chip = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	cb710_unregister_slot(chip, CB710_SLOT_SM);
+	cb710_unregister_slot(chip, CB710_SLOT_MS);
+	cb710_unregister_slot(chip, CB710_SLOT_MMC);
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
+#endif
+
+	spin_lock_irqsave(&cb710_ida_lock, flags);
+	ida_remove(&cb710_ida, chip->platform_id);
+	spin_unlock_irqrestore(&cb710_ida_lock, flags);
+}
+
+static const struct pci_device_id cb710_pci_tbl[] = {
+	{ PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_CB710_FLASH,
+		PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0, }
+};
+
+static struct pci_driver cb710_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = cb710_pci_tbl,
+	.probe = cb710_probe,
+	.remove = __devexit_p(cb710_remove_one),
+#ifdef CONFIG_PM
+	.suspend = cb710_suspend,
+	.resume = cb710_resume,
+#endif
+};
+
+static int __init cb710_init_module(void)
+{
+	return pci_register_driver(&cb710_driver);
+}
+
+static void __exit cb710_cleanup_module(void)
+{
+	pci_unregister_driver(&cb710_driver);
+	ida_destroy(&cb710_ida);
+}
+
+module_init(cb710_init_module);
+module_exit(cb710_cleanup_module);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cb710_pci_tbl);
diff --git a/drivers/misc/cb710/debug.c b/drivers/misc/cb710/debug.c
new file mode 100644
index 00000000000..02358d086e0
--- /dev/null
+++ b/drivers/misc/cb710/debug.c
@@ -0,0 +1,119 @@
+/*
+ *  cb710/debug.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/cb710.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define CB710_REG_COUNT		0x80
+
+static const u16 allow[CB710_REG_COUNT/16] = {
+	0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
+	0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
+};
+static const char *const prefix[ARRAY_SIZE(allow)] = {
+	"MMC", "MMC", "MMC", "MMC",
+	"MS?", "MS?", "SM?", "SM?"
+};
+
+static inline int allow_reg_read(unsigned block, unsigned offset, unsigned bits)
+{
+	unsigned mask = (1 << bits/8) - 1;
+	offset *= bits/8;
+	return ((allow[block] >> offset) & mask) == mask;
+}
+
+#define CB710_READ_REGS_TEMPLATE(t)					\
+static void cb710_read_regs_##t(void __iomem *iobase,			\
+	u##t *reg, unsigned select)					\
+{									\
+	unsigned i, j;							\
+									\
+	for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) {	\
+		if (!(select & (1 << i)))					\
+			continue;					\
+									\
+		for (j = 0; j < 0x10/(t/8); ++j) {			\
+			if (!allow_reg_read(i, j, t))			\
+				continue;				\
+			reg[j] = ioread##t(iobase			\
+				+ (i << 4) + (j * (t/8)));		\
+		}							\
+	}								\
+}
+
+static const char cb710_regf_8[] = "%02X";
+static const char cb710_regf_16[] = "%04X";
+static const char cb710_regf_32[] = "%08X";
+static const char cb710_xes[] = "xxxxxxxx";
+
+#define CB710_DUMP_REGS_TEMPLATE(t)					\
+static void cb710_dump_regs_##t(struct device *dev,			\
+	const u##t *reg, unsigned select)				\
+{									\
+	const char *const xp = &cb710_xes[8 - t/4];			\
+	const char *const format = cb710_regf_##t;			\
+									\
+	char msg[100], *p;						\
+	unsigned i, j;							\
+									\
+	for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) {	\
+		if (!(select & (1 << i)))				\
+			continue;					\
+		p = msg;						\
+		for (j = 0; j < 0x10/(t/8); ++j) {			\
+			*p++ = ' ';					\
+			if (j == 8/(t/8))				\
+				*p++ = ' ';				\
+			if (allow_reg_read(i, j, t))			\
+				p += sprintf(p, format, reg[j]);	\
+			else						\
+				p += sprintf(p, "%s", xp);		\
+		}							\
+		dev_dbg(dev, "%s 0x%02X %s\n", prefix[i], i << 4, msg);	\
+	}								\
+}
+
+#define CB710_READ_AND_DUMP_REGS_TEMPLATE(t)				\
+static void cb710_read_and_dump_regs_##t(struct cb710_chip *chip,	\
+	unsigned select)						\
+{									\
+	u##t regs[CB710_REG_COUNT/sizeof(u##t)];			\
+									\
+	memset(&regs, 0, sizeof(regs));					\
+	cb710_read_regs_##t(chip->iobase, regs, select);		\
+	cb710_dump_regs_##t(cb710_chip_dev(chip), regs, select);	\
+}
+
+#define CB710_REG_ACCESS_TEMPLATES(t)		\
+  CB710_READ_REGS_TEMPLATE(t)			\
+  CB710_DUMP_REGS_TEMPLATE(t)			\
+  CB710_READ_AND_DUMP_REGS_TEMPLATE(t)
+
+CB710_REG_ACCESS_TEMPLATES(8)
+CB710_REG_ACCESS_TEMPLATES(16)
+CB710_REG_ACCESS_TEMPLATES(32)
+
+void cb710_dump_regs(struct cb710_chip *chip, unsigned select)
+{
+	if (!(select & CB710_DUMP_REGS_MASK))
+		select = CB710_DUMP_REGS_ALL;
+	if (!(select & CB710_DUMP_ACCESS_MASK))
+		select |= CB710_DUMP_ACCESS_8;
+
+	if (select & CB710_DUMP_ACCESS_32)
+		cb710_read_and_dump_regs_32(chip, select);
+	if (select & CB710_DUMP_ACCESS_16)
+		cb710_read_and_dump_regs_16(chip, select);
+	if (select & CB710_DUMP_ACCESS_8)
+		cb710_read_and_dump_regs_8(chip, select);
+}
+EXPORT_SYMBOL_GPL(cb710_dump_regs);
+
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
new file mode 100644
index 00000000000..d38a7acdb6e
--- /dev/null
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -0,0 +1,150 @@
+/*
+ *  cb710/sgbuf2.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cb710.h>
+
+static bool sg_dwiter_next(struct sg_mapping_iter *miter)
+{
+	if (sg_miter_next(miter)) {
+		miter->consumed = 0;
+		return true;
+	} else
+		return false;
+}
+
+static bool sg_dwiter_is_at_end(struct sg_mapping_iter *miter)
+{
+	return miter->length == miter->consumed && !sg_dwiter_next(miter);
+}
+
+static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter)
+{
+	size_t len, left = 4;
+	uint32_t data;
+	void *addr = &data;
+
+	do {
+		len = min(miter->length - miter->consumed, left);
+		memcpy(addr, miter->addr + miter->consumed, len);
+		miter->consumed += len;
+		left -= len;
+		if (!left)
+			return data;
+		addr += len;
+	} while (sg_dwiter_next(miter));
+
+	memset(addr, 0, left);
+	return data;
+}
+
+static inline bool needs_unaligned_copy(const void *ptr)
+{
+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+	return false;
+#else
+	return ((ptr - NULL) & 3) != 0;
+#endif
+}
+
+static bool sg_dwiter_get_next_block(struct sg_mapping_iter *miter, uint32_t **ptr)
+{
+	size_t len;
+
+	if (sg_dwiter_is_at_end(miter))
+		return true;
+
+	len = miter->length - miter->consumed;
+
+	if (likely(len >= 4 && !needs_unaligned_copy(
+			miter->addr + miter->consumed))) {
+		*ptr = miter->addr + miter->consumed;
+		miter->consumed += 4;
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ * cb710_sg_dwiter_read_next_block() - get next 32-bit word from sg buffer
+ * @miter: sg mapping iterator used for reading
+ *
+ * Description:
+ *   Returns 32-bit word starting at byte pointed to by @miter@
+ *   handling any alignment issues.  Bytes past the buffer's end
+ *   are not accessed (read) but are returned as zeroes.  @miter@
+ *   is advanced by 4 bytes or to the end of buffer whichever is
+ *   closer.
+ *
+ * Context:
+ *   Same requirements as in sg_miter_next().
+ *
+ * Returns:
+ *   32-bit word just read.
+ */
+uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter)
+{
+	uint32_t *ptr = NULL;
+
+	if (likely(sg_dwiter_get_next_block(miter, &ptr)))
+		return ptr ? *ptr : 0;
+
+	return sg_dwiter_read_buffer(miter);
+}
+EXPORT_SYMBOL_GPL(cb710_sg_dwiter_read_next_block);
+
+static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
+{
+	size_t len, left = 4;
+	void *addr = &data;
+
+	do {
+		len = min(miter->length - miter->consumed, left);
+		memcpy(miter->addr, addr, len);
+		miter->consumed += len;
+		left -= len;
+		if (!left)
+			return;
+		addr += len;
+		flush_kernel_dcache_page(miter->page);
+	} while (sg_dwiter_next(miter));
+}
+
+/**
+ * cb710_sg_dwiter_write_next_block() - write next 32-bit word to sg buffer
+ * @miter: sg mapping iterator used for writing
+ *
+ * Description:
+ *   Writes 32-bit word starting at byte pointed to by @miter@
+ *   handling any alignment issues.  Bytes which would be written
+ *   past the buffer's end are silently discarded. @miter@ is
+ *   advanced by 4 bytes or to the end of buffer whichever is closer.
+ *
+ * Context:
+ *   Same requirements as in sg_miter_next().
+ */
+void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data)
+{
+	uint32_t *ptr = NULL;
+
+	if (likely(sg_dwiter_get_next_block(miter, &ptr))) {
+		if (ptr)
+			*ptr = data;
+		else
+			return;
+	} else
+		sg_dwiter_write_slow(miter, data);
+
+	if (miter->length == miter->consumed)
+		flush_kernel_dcache_page(miter->page);
+}
+EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
+
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 98ffc41eaf2..adc205c49fb 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -147,7 +147,8 @@ struct mmc_blk_request {
 static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 {
 	int err;
-	__be32 blocks;
+	u32 result;
+	__be32 *blocks;
 
 	struct mmc_request mrq;
 	struct mmc_command cmd;
@@ -199,14 +200,21 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 	mrq.cmd = &cmd;
 	mrq.data = &data;
 
-	sg_init_one(&sg, &blocks, 4);
+	blocks = kmalloc(4, GFP_KERNEL);
+	if (!blocks)
+		return (u32)-1;
+
+	sg_init_one(&sg, blocks, 4);
 
 	mmc_wait_for_req(card->host, &mrq);
 
+	result = ntohl(*blocks);
+	kfree(blocks);
+
 	if (cmd.error || data.error)
-		return (u32)-1;
+		result = (u32)-1;
 
-	return ntohl(blocks);
+	return result;
 }
 
 static u32 get_card_status(struct mmc_card *card, struct request *req)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 26491173275..d84c880fac8 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -708,7 +708,13 @@ static void mmc_power_up(struct mmc_host *host)
 	 */
 	mmc_delay(10);
 
-	host->ios.clock = host->f_min;
+	if (host->f_min > 400000) {
+		pr_warning("%s: Minimum clock frequency too high for "
+				"identification mode\n", mmc_hostname(host));
+		host->ios.clock = host->f_min;
+	} else
+		host->ios.clock = 400000;
+
 	host->ios.power_mode = MMC_POWER_ON;
 	mmc_set_ios(host);
 
@@ -855,61 +861,72 @@ void mmc_rescan(struct work_struct *work)
 
 	mmc_bus_get(host);
 
-	if (host->bus_ops == NULL) {
-		/*
-		 * Only we can add a new handler, so it's safe to
-		 * release the lock here.
-		 */
+	/* if there is a card registered, check whether it is still present */
+	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
+		host->bus_ops->detect(host);
+
+	mmc_bus_put(host);
+
+
+	mmc_bus_get(host);
+
+	/* if there still is a card present, stop here */
+	if (host->bus_ops != NULL) {
 		mmc_bus_put(host);
+		goto out;
+	}
 
-		if (host->ops->get_cd && host->ops->get_cd(host) == 0)
-			goto out;
+	/* detect a newly inserted card */
 
-		mmc_claim_host(host);
+	/*
+	 * Only we can add a new handler, so it's safe to
+	 * release the lock here.
+	 */
+	mmc_bus_put(host);
 
-		mmc_power_up(host);
-		mmc_go_idle(host);
+	if (host->ops->get_cd && host->ops->get_cd(host) == 0)
+		goto out;
 
-		mmc_send_if_cond(host, host->ocr_avail);
+	mmc_claim_host(host);
 
-		/*
-		 * First we search for SDIO...
-		 */
-		err = mmc_send_io_op_cond(host, 0, &ocr);
-		if (!err) {
-			if (mmc_attach_sdio(host, ocr))
-				mmc_power_off(host);
-			goto out;
-		}
+	mmc_power_up(host);
+	mmc_go_idle(host);
 
-		/*
-		 * ...then normal SD...
-		 */
-		err = mmc_send_app_op_cond(host, 0, &ocr);
-		if (!err) {
-			if (mmc_attach_sd(host, ocr))
-				mmc_power_off(host);
-			goto out;
-		}
+	mmc_send_if_cond(host, host->ocr_avail);
 
-		/*
-		 * ...and finally MMC.
-		 */
-		err = mmc_send_op_cond(host, 0, &ocr);
-		if (!err) {
-			if (mmc_attach_mmc(host, ocr))
-				mmc_power_off(host);
-			goto out;
-		}
+	/*
+	 * First we search for SDIO...
+	 */
+	err = mmc_send_io_op_cond(host, 0, &ocr);
+	if (!err) {
+		if (mmc_attach_sdio(host, ocr))
+			mmc_power_off(host);
+		goto out;
+	}
 
-		mmc_release_host(host);
-		mmc_power_off(host);
-	} else {
-		if (host->bus_ops->detect && !host->bus_dead)
-			host->bus_ops->detect(host);
+	/*
+	 * ...then normal SD...
+	 */
+	err = mmc_send_app_op_cond(host, 0, &ocr);
+	if (!err) {
+		if (mmc_attach_sd(host, ocr))
+			mmc_power_off(host);
+		goto out;
+	}
 
-		mmc_bus_put(host);
+	/*
+	 * ...and finally MMC.
+	 */
+	err = mmc_send_op_cond(host, 0, &ocr);
+	if (!err) {
+		if (mmc_attach_mmc(host, ocr))
+			mmc_power_off(host);
+		goto out;
 	}
+
+	mmc_release_host(host);
+	mmc_power_off(host);
+
 out:
 	if (host->caps & MMC_CAP_NEEDS_POLL)
 		mmc_schedule_delayed_work(&host->detect, HZ);
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index b4cf691f3f6..40111a6d8d5 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -83,6 +83,17 @@ config MMC_SDHCI_OF
 
 	  If unsure, say N.
 
+config MMC_SDHCI_PLTFM
+	tristate "SDHCI support on the platform specific bus"
+	depends on MMC_SDHCI
+	help
+	  This selects the platform specific bus support for Secure Digital Host
+	  Controller Interface.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
@@ -155,7 +166,7 @@ config MMC_ATMELMCI_DMA
 
 config MMC_IMX
 	tristate "Motorola i.MX Multimedia Card Interface support"
-	depends on ARCH_IMX
+	depends on ARCH_MX1
 	help
 	  This selects the Motorola i.MX Multimedia card Interface.
 	  If you have a i.MX platform with a Multimedia Card slot,
@@ -237,7 +248,20 @@ config MMC_SDRICOH_CS
 
 config MMC_TMIO
 	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
-	depends on MFD_TMIO
+	depends on MFD_TMIO || MFD_ASIC3
 	help
 	  This provides support for the SD/MMC cell found in TC6393XB,
-	  T7L66XB and also ipaq ASIC3
+	  T7L66XB and also HTC ASIC3
+
+config MMC_CB710
+	tristate "ENE CB710 MMC/SD Interface support"
+	depends on PCI
+	select CB710_CORE
+	help
+	  This option enables support for MMC/SD part of ENE CB710/720 Flash
+	  memory card reader found in some laptops (ie. some versions of
+	  HP Compaq nx9500).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called cb710-mmc.
+
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 970a997620e..79da397c5fe 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
 obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
+obj-$(CONFIG_MMC_SDHCI_PLTFM)	+= sdhci-pltfm.o
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
@@ -29,4 +30,8 @@ endif
 obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
+obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
 
+ifeq ($(CONFIG_CB710_DEBUG),y)
+	CFLAGS-cb710-mmc	+= -DDEBUG
+endif
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index b58364ed6bb..fc8a0fe7c5c 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -7,6 +7,12 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+/*
+ * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors
+ * Registers and bitfields marked with [2] are only available in MCI2
+ */
+
 #ifndef __DRIVERS_MMC_ATMEL_MCI_H__
 #define __DRIVERS_MMC_ATMEL_MCI_H__
 
@@ -14,11 +20,17 @@
 #define MCI_CR			0x0000	/* Control */
 # define MCI_CR_MCIEN		(  1 <<  0)	/* MCI Enable */
 # define MCI_CR_MCIDIS		(  1 <<  1)	/* MCI Disable */
+# define MCI_CR_PWSEN		(  1 <<  2)	/* Power Save Enable */
+# define MCI_CR_PWSDIS		(  1 <<  3)	/* Power Save Disable */
 # define MCI_CR_SWRST		(  1 <<  7)	/* Software Reset */
 #define MCI_MR			0x0004	/* Mode */
 # define MCI_MR_CLKDIV(x)	((x) <<  0)	/* Clock Divider */
+# define MCI_MR_PWSDIV(x)	((x) <<  8)	/* Power Saving Divider */
 # define MCI_MR_RDPROOF		(  1 << 11)	/* Read Proof */
 # define MCI_MR_WRPROOF		(  1 << 12)	/* Write Proof */
+# define MCI_MR_PDCFBYTE	(  1 << 13)	/* Force Byte Transfer */
+# define MCI_MR_PDCPADV		(  1 << 14)	/* Padding Value */
+# define MCI_MR_PDCMODE		(  1 << 15)	/* PDC-oriented Mode */
 #define MCI_DTOR		0x0008	/* Data Timeout */
 # define MCI_DTOCYC(x)		((x) <<  0)	/* Data Timeout Cycles */
 # define MCI_DTOMUL(x)		((x) <<  4)	/* Data Timeout Multiplier */
@@ -28,6 +40,7 @@
 # define MCI_SDCSEL_MASK	(  3 <<  0)
 # define MCI_SDCBUS_1BIT	(  0 <<  6)	/* 1-bit data bus */
 # define MCI_SDCBUS_4BIT	(  2 <<  6)	/* 4-bit data bus */
+# define MCI_SDCBUS_8BIT	(  3 <<  6)	/* 8-bit data bus[2] */
 # define MCI_SDCBUS_MASK	(  3 <<  6)
 #define MCI_ARGR		0x0010	/* Command Argument */
 #define MCI_CMDR		0x0014	/* Command */
@@ -56,6 +69,9 @@
 #define MCI_BLKR		0x0018	/* Block */
 # define MCI_BCNT(x)		((x) <<  0)	/* Data Block Count */
 # define MCI_BLKLEN(x)		((x) << 16)	/* Data Block Length */
+#define MCI_CSTOR		0x001c	/* Completion Signal Timeout[2] */
+# define MCI_CSTOCYC(x)		((x) <<  0)	/* CST cycles */
+# define MCI_CSTOMUL(x)		((x) <<  4)	/* CST multiplier */
 #define MCI_RSPR		0x0020	/* Response 0 */
 #define MCI_RSPR1		0x0024	/* Response 1 */
 #define MCI_RSPR2		0x0028	/* Response 2 */
@@ -83,7 +99,24 @@
 # define MCI_DTOE		(  1 <<  22)	/* Data Time-Out Error */
 # define MCI_OVRE		(  1 <<  30)	/* RX Overrun Error */
 # define MCI_UNRE		(  1 <<  31)	/* TX Underrun Error */
+#define MCI_DMA			0x0050	/* DMA Configuration[2] */
+# define MCI_DMA_OFFSET(x)	((x) <<  0)	/* DMA Write Buffer Offset */
+# define MCI_DMA_CHKSIZE(x)	((x) <<  4)	/* DMA Channel Read and Write Chunk Size */
+# define MCI_DMAEN		(  1 <<  8)	/* DMA Hardware Handshaking Enable */
+#define MCI_CFG			0x0054	/* Configuration[2] */
+# define MCI_CFG_FIFOMODE_1DATA	(  1 <<  0)	/* MCI Internal FIFO control mode */
+# define MCI_CFG_FERRCTRL_COR	(  1 <<  4)	/* Flow Error flag reset control mode */
+# define MCI_CFG_HSMODE		(  1 <<  8)	/* High Speed Mode */
+# define MCI_CFG_LSYNC		(  1 << 12)	/* Synchronize on the last block */
+#define MCI_WPMR		0x00e4	/* Write Protection Mode[2] */
+# define MCI_WP_EN		(  1 <<  0)	/* WP Enable */
+# define MCI_WP_KEY		(0x4d4349 << 8)	/* WP Key */
+#define MCI_WPSR		0x00e8	/* Write Protection Status[2] */
+# define MCI_GET_WP_VS(x)	((x) & 0x0f)
+# define MCI_GET_WP_VSRC(x)	(((x) >> 8) & 0xffff)
+#define MCI_FIFO_APERTURE	0x0200	/* FIFO Aperture[2] */
 
+/* This is not including the FIFO Aperture on MCI2 */
 #define MCI_REGS_SIZE		0x100
 
 /* Register access macros */
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
new file mode 100644
index 00000000000..11efefb1af5
--- /dev/null
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -0,0 +1,804 @@
+/*
+ *  cb710/mmc.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "cb710-mmc.h"
+
+static const u8 cb710_clock_divider_log2[8] = {
+/*	1, 2, 4, 8, 16, 32, 128, 512 */
+	0, 1, 2, 3,  4,  5,   7,   9
+};
+#define CB710_MAX_DIVIDER_IDX	\
+	(ARRAY_SIZE(cb710_clock_divider_log2) - 1)
+
+static const u8 cb710_src_freq_mhz[16] = {
+	33, 10, 20, 25, 30, 35, 40, 45,
+	50, 55, 60, 65, 70, 75, 80, 85
+};
+
+static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev;
+	u32 src_freq_idx;
+	u32 divider_idx;
+	int src_hz;
+
+	/* this is magic, unverifiable for me, unless I get
+	 * MMC card with cables connected to bus signals */
+	pci_read_config_dword(pdev, 0x48, &src_freq_idx);
+	src_freq_idx = (src_freq_idx >> 16) & 0xF;
+	src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000;
+
+	for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) {
+		if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx])
+			break;
+	}
+
+	if (src_freq_idx)
+		divider_idx |= 0x8;
+
+	cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28);
+
+	dev_dbg(cb710_slot_dev(slot),
+		"clock set to %d Hz, wanted %d Hz; flag = %d\n",
+		src_hz >> cb710_clock_divider_log2[divider_idx & 7],
+		hz, (divider_idx & 8) != 0);
+}
+
+static void __cb710_mmc_enable_irq(struct cb710_slot *slot,
+	unsigned short enable, unsigned short mask)
+{
+	/* clear global IE
+	 * - it gets set later if any interrupt sources are enabled */
+	mask |= CB710_MMC_IE_IRQ_ENABLE;
+
+	/* look like interrupt is fired whenever
+	 * WORD[0x0C] & WORD[0x10] != 0;
+	 * -> bit 15 port 0x0C seems to be global interrupt enable
+	 */
+
+	enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT)
+		& ~mask) | enable;
+
+	if (enable)
+		enable |= CB710_MMC_IE_IRQ_ENABLE;
+
+	cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable);
+}
+
+static void cb710_mmc_enable_irq(struct cb710_slot *slot,
+	unsigned short enable, unsigned short mask)
+{
+	struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot));
+	unsigned long flags;
+
+	spin_lock_irqsave(&reader->irq_lock, flags);
+	/* this is the only thing irq_lock protects */
+	__cb710_mmc_enable_irq(slot, enable, mask);
+	spin_unlock_irqrestore(&reader->irq_lock, flags);
+}
+
+static void cb710_mmc_reset_events(struct cb710_slot *slot)
+{
+	cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF);
+	cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF);
+	cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF);
+}
+
+static int cb710_mmc_is_card_inserted(struct cb710_slot *slot)
+{
+	return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+		& CB710_MMC_S3_CARD_DETECTED;
+}
+
+static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable)
+{
+	dev_dbg(cb710_slot_dev(slot), "configuring %d-data-line%s mode\n",
+		enable ? 4 : 1, enable ? "s" : "");
+	if (enable)
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+			CB710_MMC_C1_4BIT_DATA_BUS, 0);
+	else
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+			0, CB710_MMC_C1_4BIT_DATA_BUS);
+}
+
+static int cb710_check_event(struct cb710_slot *slot, u8 what)
+{
+	u16 status;
+
+	status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT);
+
+	if (status & CB710_MMC_S0_FIFO_UNDERFLOW) {
+		/* it is just a guess, so log it */
+		dev_dbg(cb710_slot_dev(slot),
+			"CHECK : ignoring bit 6 in status %04X\n", status);
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+			CB710_MMC_S0_FIFO_UNDERFLOW);
+		status &= ~CB710_MMC_S0_FIFO_UNDERFLOW;
+	}
+
+	if (status & CB710_MMC_STATUS_ERROR_EVENTS) {
+		dev_dbg(cb710_slot_dev(slot),
+			"CHECK : returning EIO on status %04X\n", status);
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF);
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+			CB710_MMC_S1_RESET);
+		return -EIO;
+	}
+
+	/* 'what' is a bit in MMC_STATUS1 */
+	if ((status >> 8) & what) {
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int cb710_wait_for_event(struct cb710_slot *slot, u8 what)
+{
+	int err = 0;
+	unsigned limit = 2000000;	/* FIXME: real timeout */
+
+#ifdef CONFIG_CB710_DEBUG
+	u32 e, x;
+	e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+	while (!(err = cb710_check_event(slot, what))) {
+		if (!--limit) {
+			cb710_dump_regs(cb710_slot_to_chip(slot),
+				CB710_DUMP_REGS_MMC);
+			err = -ETIMEDOUT;
+			break;
+		}
+		udelay(1);
+	}
+
+#ifdef CONFIG_CB710_DEBUG
+	x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+	limit = 2000000 - limit;
+	if (limit > 100)
+		dev_dbg(cb710_slot_dev(slot),
+			"WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n",
+			limit, what, e, x);
+#endif
+	return err < 0 ? err : 0;
+}
+
+
+static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
+{
+	unsigned limit = 500000;	/* FIXME: real timeout */
+	int err = 0;
+
+#ifdef CONFIG_CB710_DEBUG
+	u32 e, x;
+	e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+	while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) {
+		if (!--limit) {
+			cb710_dump_regs(cb710_slot_to_chip(slot),
+				CB710_DUMP_REGS_MMC);
+			err = -ETIMEDOUT;
+			break;
+		}
+		udelay(1);
+	}
+
+#ifdef CONFIG_CB710_DEBUG
+	x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+	limit = 500000 - limit;
+	if (limit > 100)
+		dev_dbg(cb710_slot_dev(slot),
+			"WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n",
+			limit, mask, e, x);
+#endif
+	return 0;
+}
+
+static void cb710_mmc_set_transfer_size(struct cb710_slot *slot,
+	size_t count, size_t blocksize)
+{
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT,
+		((count - 1) << 16)|(blocksize - 1));
+
+	dev_vdbg(cb710_slot_dev(slot), "set up for %zu block%s of %zu bytes\n",
+		count, count == 1 ? "" : "s", blocksize);
+}
+
+static void cb710_mmc_fifo_hack(struct cb710_slot *slot)
+{
+	/* without this, received data is prepended with 8-bytes of zeroes */
+	u32 r1, r2;
+	int ok = 0;
+
+	r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+	r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+	if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT)
+	    & CB710_MMC_S0_FIFO_UNDERFLOW) {
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+			CB710_MMC_S0_FIFO_UNDERFLOW);
+		ok = 1;
+	}
+
+	dev_dbg(cb710_slot_dev(slot),
+		"FIFO-read-hack: expected STATUS0 bit was %s\n",
+		ok ? "set." : "NOT SET!");
+	dev_dbg(cb710_slot_dev(slot),
+		"FIFO-read-hack: dwords ignored: %08X %08X - %s\n",
+		r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok");
+}
+
+static int cb710_mmc_receive_pio(struct cb710_slot *slot,
+	struct sg_mapping_iter *miter, size_t dw_count)
+{
+	if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) {
+		int err = cb710_wait_for_event(slot,
+			CB710_MMC_S1_PIO_TRANSFER_DONE);
+		if (err)
+			return err;
+	}
+
+	cb710_sg_dwiter_write_from_io(miter,
+		slot->iobase + CB710_MMC_DATA_PORT, dw_count);
+
+	return 0;
+}
+
+static bool cb710_is_transfer_size_supported(struct mmc_data *data)
+{
+	return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8));
+}
+
+static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
+{
+	struct sg_mapping_iter miter;
+	size_t len, blocks = data->blocks;
+	int err = 0;
+
+	/* TODO: I don't know how/if the hardware handles non-16B-boundary blocks
+	 * except single 8B block */
+	if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
+		return -EINVAL;
+
+	sg_miter_start(&miter, data->sg, data->sg_len, 0);
+
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+		15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+	cb710_mmc_fifo_hack(slot);
+
+	while (blocks-- > 0) {
+		len = data->blksz;
+
+		while (len >= 16) {
+			err = cb710_mmc_receive_pio(slot, &miter, 4);
+			if (err)
+				goto out;
+			len -= 16;
+		}
+
+		if (!len)
+			continue;
+
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+			len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+		len = (len >= 8) ? 4 : 2;
+		err = cb710_mmc_receive_pio(slot, &miter, len);
+		if (err)
+			goto out;
+	}
+out:
+	cb710_sg_miter_stop_writing(&miter);
+	return err;
+}
+
+static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
+{
+	struct sg_mapping_iter miter;
+	size_t len, blocks = data->blocks;
+	int err = 0;
+
+	/* TODO: I don't know how/if the hardware handles multiple
+	 * non-16B-boundary blocks */
+	if (unlikely(data->blocks > 1 && data->blksz & 15))
+		return -EINVAL;
+
+	sg_miter_start(&miter, data->sg, data->sg_len, 0);
+
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+		0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+	while (blocks-- > 0) {
+		len = (data->blksz + 15) >> 4;
+		do {
+			if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT)
+			    & CB710_MMC_S2_FIFO_EMPTY)) {
+				err = cb710_wait_for_event(slot,
+					CB710_MMC_S1_PIO_TRANSFER_DONE);
+				if (err)
+					goto out;
+			}
+			cb710_sg_dwiter_read_to_io(&miter,
+				slot->iobase + CB710_MMC_DATA_PORT, 4);
+		} while (--len);
+	}
+out:
+	sg_miter_stop(&miter);
+	return err;
+}
+
+static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader,
+	struct mmc_command *cmd)
+{
+	unsigned int flags = cmd->flags;
+	u16 cb_flags = 0;
+
+	/* Windows driver returned 0 for commands for which no response
+	 * is expected. It happened that there were only two such commands
+	 * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might
+	 * as well be a bug in that driver.
+	 *
+	 * Original driver set bit 14 for MMC/SD application
+	 * commands. There's no difference 'on the wire' and
+	 * it apparently works without it anyway.
+	 */
+
+	switch (flags & MMC_CMD_MASK) {
+	case MMC_CMD_AC:	cb_flags = CB710_MMC_CMD_AC;	break;
+	case MMC_CMD_ADTC:	cb_flags = CB710_MMC_CMD_ADTC;	break;
+	case MMC_CMD_BC:	cb_flags = CB710_MMC_CMD_BC;	break;
+	case MMC_CMD_BCR:	cb_flags = CB710_MMC_CMD_BCR;	break;
+	}
+
+	if (flags & MMC_RSP_BUSY)
+		cb_flags |= CB710_MMC_RSP_BUSY;
+
+	cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT;
+
+	if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
+		cb_flags |= CB710_MMC_DATA_READ;
+
+	if (flags & MMC_RSP_PRESENT) {
+		/* Windows driver set 01 at bits 4,3 except for
+		 * MMC_SET_BLOCKLEN where it set 10. Maybe the
+		 * hardware can do something special about this
+		 * command? The original driver looks buggy/incomplete
+		 * anyway so we ignore this for now.
+		 *
+		 * I assume that 00 here means no response is expected.
+		 */
+		cb_flags |= CB710_MMC_RSP_PRESENT;
+
+		if (flags & MMC_RSP_136)
+			cb_flags |= CB710_MMC_RSP_136;
+		if (!(flags & MMC_RSP_CRC))
+			cb_flags |= CB710_MMC_RSP_NO_CRC;
+	}
+
+	return cb_flags;
+}
+
+static void cb710_receive_response(struct cb710_slot *slot,
+	struct mmc_command *cmd)
+{
+	unsigned rsp_opcode, wanted_opcode;
+
+	/* Looks like final byte with CRC is always stripped (same as SDHCI) */
+	if (cmd->flags & MMC_RSP_136) {
+		u32 resp[4];
+
+		resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT);
+		resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT);
+		resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT);
+		resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+		rsp_opcode = resp[0] >> 24;
+
+		cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24);
+		cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24);
+		cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24);
+		cmd->resp[3] = (resp[3] << 8);
+	} else {
+		rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F;
+		cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+	}
+
+	wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F;
+	if (rsp_opcode != wanted_opcode)
+		cmd->error = -EILSEQ;
+}
+
+static int cb710_mmc_transfer_data(struct cb710_slot *slot,
+	struct mmc_data *data)
+{
+	int error, to;
+
+	if (data->flags & MMC_DATA_READ)
+		error = cb710_mmc_receive(slot, data);
+	else
+		error = cb710_mmc_send(slot, data);
+
+	to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE);
+	if (!error)
+		error = to;
+
+	if (!error)
+		data->bytes_xfered = data->blksz * data->blocks;
+	return error;
+}
+
+static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	struct mmc_data *data = cmd->data;
+
+	u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd);
+	dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd);
+
+	if (data) {
+		if (!cb710_is_transfer_size_supported(data)) {
+			data->error = -EINVAL;
+			return -1;
+		}
+		cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz);
+	}
+
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10);
+	cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd);
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg);
+	cb710_mmc_reset_events(slot);
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0);
+
+	cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT);
+	if (cmd->error)
+		return -1;
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		cb710_receive_response(slot, cmd);
+		if (cmd->error)
+			return -1;
+	}
+
+	if (data)
+		data->error = cb710_mmc_transfer_data(slot, data);
+	return 0;
+}
+
+static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+	WARN_ON(reader->mrq != NULL);
+
+	reader->mrq = mrq;
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+
+	if (cb710_mmc_is_card_inserted(slot)) {
+		if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop)
+			cb710_mmc_command(mmc, mrq->stop);
+		mdelay(1);
+	} else {
+		mrq->cmd->error = -ENOMEDIUM;
+	}
+
+	tasklet_schedule(&reader->finish_req_tasklet);
+}
+
+static int cb710_mmc_powerup(struct cb710_slot *slot)
+{
+#ifdef CONFIG_CB710_DEBUG
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+#endif
+	int err;
+
+	/* a lot of magic; see comment in cb710_mmc_set_clock() */
+	dev_dbg(cb710_slot_dev(slot), "bus powerup\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(1);
+	dev_dbg(cb710_slot_dev(slot), "after delay 1\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(1);
+	dev_dbg(cb710_slot_dev(slot), "after delay 2\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(2);
+	dev_dbg(cb710_slot_dev(slot), "after delay 3\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	/* This port behaves weird: quick byte reads of 0x08,0x09 return
+	 * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when
+	 * read/written from userspace...  What am I missing here?
+	 * (it doesn't depend on write-to-read delay) */
+	cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n");
+
+	return cb710_check_event(slot, 0);
+}
+
+static void cb710_mmc_powerdown(struct cb710_slot *slot)
+{
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80);
+}
+
+static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	int err;
+
+	cb710_mmc_set_clock(mmc, ios->clock);
+
+	if (!cb710_mmc_is_card_inserted(slot)) {
+		dev_dbg(cb710_slot_dev(slot),
+			"no card inserted - ignoring bus powerup request\n");
+		ios->power_mode = MMC_POWER_OFF;
+	}
+
+	if (ios->power_mode != reader->last_power_mode)
+	switch (ios->power_mode) {
+	case MMC_POWER_ON:
+		err = cb710_mmc_powerup(slot);
+		if (err) {
+			dev_warn(cb710_slot_dev(slot),
+				"powerup failed (%d)- retrying\n", err);
+			cb710_mmc_powerdown(slot);
+			udelay(1);
+			err = cb710_mmc_powerup(slot);
+			if (err)
+				dev_warn(cb710_slot_dev(slot),
+					"powerup retry failed (%d) - expect errors\n",
+					err);
+		}
+		reader->last_power_mode = MMC_POWER_ON;
+		break;
+	case MMC_POWER_OFF:
+		cb710_mmc_powerdown(slot);
+		reader->last_power_mode = MMC_POWER_OFF;
+		break;
+	case MMC_POWER_UP:
+	default:
+		/* ignore */;
+	}
+
+	cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1);
+
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+}
+
+static int cb710_mmc_get_ro(struct mmc_host *mmc)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+
+	return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+		& CB710_MMC_S3_WRITE_PROTECTED;
+}
+
+static int cb710_mmc_irq_handler(struct cb710_slot *slot)
+{
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	u32 status, config1, config2, irqen;
+
+	status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+	irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT);
+	config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT);
+	config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT);
+
+	dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, "
+		"ie: %08X, c2: %08X, c1: %08X\n",
+		status, irqen, config2, config1);
+
+	if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) {
+		/* ack the event */
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+			CB710_MMC_S1_CARD_CHANGED);
+		if ((irqen & CB710_MMC_IE_CISTATUS_MASK)
+		    == CB710_MMC_IE_CISTATUS_MASK)
+			mmc_detect_change(mmc, HZ/5);
+	} else {
+		dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n");
+		spin_lock(&reader->irq_lock);
+		__cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK);
+		spin_unlock(&reader->irq_lock);
+	}
+
+	return 1;
+}
+
+static void cb710_mmc_finish_request_tasklet(unsigned long data)
+{
+	struct mmc_host *mmc = (void *)data;
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	struct mmc_request *mrq = reader->mrq;
+
+	reader->mrq = NULL;
+	mmc_request_done(mmc, mrq);
+}
+
+static const struct mmc_host_ops cb710_mmc_host = {
+	.request = cb710_mmc_request,
+	.set_ios = cb710_mmc_set_ios,
+	.get_ro = cb710_mmc_get_ro
+};
+
+#ifdef CONFIG_PM
+
+static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	int err;
+
+	err = mmc_suspend_host(mmc, state);
+	if (err)
+		return err;
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	return 0;
+}
+
+static int cb710_mmc_resume(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+
+	return mmc_resume_host(mmc);
+}
+
+#endif /* CONFIG_PM */
+
+static int __devinit cb710_mmc_init(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+	struct mmc_host *mmc;
+	struct cb710_mmc_reader *reader;
+	int err;
+	u32 val;
+
+	mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot));
+	if (!mmc)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, mmc);
+
+	/* harmless (maybe) magic */
+	pci_read_config_dword(chip->pdev, 0x48, &val);
+	val = cb710_src_freq_mhz[(val >> 16) & 0xF];
+	dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val);
+	val *= 1000000;
+
+	mmc->ops = &cb710_mmc_host;
+	mmc->f_max = val;
+	mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX];
+	mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+
+	reader = mmc_priv(mmc);
+
+	tasklet_init(&reader->finish_req_tasklet,
+		cb710_mmc_finish_request_tasklet, (unsigned long)mmc);
+	spin_lock_init(&reader->irq_lock);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	cb710_set_irq_handler(slot, cb710_mmc_irq_handler);
+
+	err = mmc_add_host(mmc);
+	if (unlikely(err))
+		goto err_free_mmc;
+
+	dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n",
+		mmc_hostname(mmc));
+
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0);
+
+	return 0;
+
+err_free_mmc:
+	dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err);
+
+	mmc_free_host(mmc);
+	return err;
+}
+
+static int __devexit cb710_mmc_exit(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+	cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS);
+
+	mmc_remove_host(mmc);
+
+	/* IRQs should be disabled now, but let's stay on the safe side */
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	cb710_set_irq_handler(slot, NULL);
+
+	/* clear config ports - just in case */
+	cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0);
+	cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0);
+
+	tasklet_kill(&reader->finish_req_tasklet);
+
+	mmc_free_host(mmc);
+	return 0;
+}
+
+static struct platform_driver cb710_mmc_driver = {
+	.driver.name = "cb710-mmc",
+	.probe = cb710_mmc_init,
+	.remove = __devexit_p(cb710_mmc_exit),
+#ifdef CONFIG_PM
+	.suspend = cb710_mmc_suspend,
+	.resume = cb710_mmc_resume,
+#endif
+};
+
+static int __init cb710_mmc_init_module(void)
+{
+	return platform_driver_register(&cb710_mmc_driver);
+}
+
+static void __exit cb710_mmc_cleanup_module(void)
+{
+	platform_driver_unregister(&cb710_mmc_driver);
+}
+
+module_init(cb710_mmc_init_module);
+module_exit(cb710_mmc_cleanup_module);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cb710-mmc");
diff --git a/drivers/mmc/host/cb710-mmc.h b/drivers/mmc/host/cb710-mmc.h
new file mode 100644
index 00000000000..e845c776bdd
--- /dev/null
+++ b/drivers/mmc/host/cb710-mmc.h
@@ -0,0 +1,104 @@
+/*
+ *  cb710/cb710-mmc.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_MMC_H
+#define LINUX_CB710_MMC_H
+
+#include <linux/cb710.h>
+
+/* per-MMC-reader structure */
+struct cb710_mmc_reader {
+	struct tasklet_struct finish_req_tasklet;
+	struct mmc_request *mrq;
+	spinlock_t irq_lock;
+	unsigned char last_power_mode;
+};
+
+/* some device struct walking */
+
+static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot)
+{
+	return dev_get_drvdata(&slot->pdev.dev);
+}
+
+static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc)
+{
+	struct platform_device *pdev = container_of(mmc_dev(mmc),
+		struct platform_device, dev);
+	return cb710_pdev_to_slot(pdev);
+}
+
+/* registers (this might be all wrong ;) */
+
+#define CB710_MMC_DATA_PORT		0x00
+
+#define CB710_MMC_CONFIG_PORT		0x04
+#define CB710_MMC_CONFIG0_PORT		0x04
+#define CB710_MMC_CONFIG1_PORT		0x05
+#define   CB710_MMC_C1_4BIT_DATA_BUS		0x40
+#define CB710_MMC_CONFIG2_PORT		0x06
+#define   CB710_MMC_C2_READ_PIO_SIZE_MASK	0x0F	/* N-1 */
+#define CB710_MMC_CONFIG3_PORT		0x07
+
+#define CB710_MMC_CONFIGB_PORT		0x08
+
+#define CB710_MMC_IRQ_ENABLE_PORT	0x0C
+#define   CB710_MMC_IE_TEST_MASK		0x00BF
+#define   CB710_MMC_IE_CARD_INSERTION_STATUS	0x1000
+#define   CB710_MMC_IE_IRQ_ENABLE		0x8000
+#define   CB710_MMC_IE_CISTATUS_MASK		\
+		(CB710_MMC_IE_CARD_INSERTION_STATUS|CB710_MMC_IE_IRQ_ENABLE)
+
+#define CB710_MMC_STATUS_PORT		0x10
+#define   CB710_MMC_STATUS_ERROR_EVENTS		0x60FF
+#define CB710_MMC_STATUS0_PORT		0x10
+#define   CB710_MMC_S0_FIFO_UNDERFLOW		0x40
+#define CB710_MMC_STATUS1_PORT		0x11
+#define   CB710_MMC_S1_COMMAND_SENT		0x01
+#define   CB710_MMC_S1_DATA_TRANSFER_DONE	0x02
+#define   CB710_MMC_S1_PIO_TRANSFER_DONE	0x04
+#define   CB710_MMC_S1_CARD_CHANGED		0x10
+#define   CB710_MMC_S1_RESET			0x20
+#define CB710_MMC_STATUS2_PORT		0x12
+#define   CB710_MMC_S2_FIFO_READY		0x01
+#define   CB710_MMC_S2_FIFO_EMPTY		0x02
+#define   CB710_MMC_S2_BUSY_10			0x10
+#define   CB710_MMC_S2_BUSY_20			0x20
+#define CB710_MMC_STATUS3_PORT		0x13
+#define   CB710_MMC_S3_CARD_DETECTED		0x02
+#define   CB710_MMC_S3_WRITE_PROTECTED		0x04
+
+#define CB710_MMC_CMD_TYPE_PORT		0x14
+#define   CB710_MMC_RSP_TYPE_MASK		0x0007
+#define     CB710_MMC_RSP_R1			(0)
+#define     CB710_MMC_RSP_136			(5)
+#define     CB710_MMC_RSP_NO_CRC		(2)
+#define   CB710_MMC_RSP_PRESENT_MASK		0x0018
+#define     CB710_MMC_RSP_NONE			(0 << 3)
+#define     CB710_MMC_RSP_PRESENT		(1 << 3)
+#define     CB710_MMC_RSP_PRESENT_X		(2 << 3)
+#define   CB710_MMC_CMD_TYPE_MASK		0x0060
+#define     CB710_MMC_CMD_BC			(0 << 5)
+#define     CB710_MMC_CMD_BCR			(1 << 5)
+#define     CB710_MMC_CMD_AC			(2 << 5)
+#define     CB710_MMC_CMD_ADTC			(3 << 5)
+#define   CB710_MMC_DATA_READ			0x0080
+#define   CB710_MMC_CMD_CODE_MASK		0x3F00
+#define   CB710_MMC_CMD_CODE_SHIFT		8
+#define   CB710_MMC_IS_APP_CMD			0x4000
+#define   CB710_MMC_RSP_BUSY			0x8000
+
+#define CB710_MMC_CMD_PARAM_PORT	0x18
+#define CB710_MMC_TRANSFER_SIZE_PORT	0x1C
+#define CB710_MMC_RESPONSE0_PORT	0x20
+#define CB710_MMC_RESPONSE1_PORT	0x24
+#define CB710_MMC_RESPONSE2_PORT	0x28
+#define CB710_MMC_RESPONSE3_PORT	0x2C
+
+#endif /* LINUX_CB710_MMC_H */
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index f48349d18c9..240608cc7ae 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -97,6 +97,14 @@
  */
 #define r1b_timeout		(HZ * 3)
 
+/* One of the critical speed parameters is the amount of data which may
+ * be transfered in one command. If this value is too low, the SD card
+ * controller has to do multiple partial block writes (argggh!). With
+ * today (2008) SD cards there is little speed gain if we transfer more
+ * than 64 KBytes at a time. So use this value until there is any indication
+ * that we should do more here.
+ */
+#define MMC_SPI_BLOCKSATONCE	128
 
 /****************************************************************************/
 
@@ -327,15 +335,16 @@ checkstatus:
 
 	/* Status byte: the entire seven-bit R1 response.  */
 	if (cmd->resp[0] != 0) {
-		if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS
-				      | R1_SPI_ILLEGAL_COMMAND)
+		if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS)
 				& cmd->resp[0])
-			value = -EINVAL;
+			value = -EFAULT; /* Bad address */
+		else if (R1_SPI_ILLEGAL_COMMAND & cmd->resp[0])
+			value = -ENOSYS; /* Function not implemented */
 		else if (R1_SPI_COM_CRC & cmd->resp[0])
-			value = -EILSEQ;
+			value = -EILSEQ; /* Illegal byte sequence */
 		else if ((R1_SPI_ERASE_SEQ | R1_SPI_ERASE_RESET)
 				& cmd->resp[0])
-			value = -EIO;
+			value = -EIO;    /* I/O error */
 		/* else R1_SPI_IDLE, "it's resetting" */
 	}
 
@@ -1366,6 +1375,10 @@ static int mmc_spi_probe(struct spi_device *spi)
 
 	mmc->ops = &mmc_spi_ops;
 	mmc->max_blk_size = MMC_SPI_BLOCKSIZE;
+	mmc->max_hw_segs = MMC_SPI_BLOCKSATONCE;
+	mmc->max_phys_segs = MMC_SPI_BLOCKSATONCE;
+	mmc->max_req_size = MMC_SPI_BLOCKSATONCE * MMC_SPI_BLOCKSIZE;
+	mmc->max_blk_count = MMC_SPI_BLOCKSATONCE;
 
 	mmc->caps = MMC_CAP_SPI;
 
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 7d4febdab28..e1aa8471ab1 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -546,7 +546,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 		host->mclk = clk_get_rate(host->clk);
 		DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
 	}
-	host->base = ioremap(dev->res.start, SZ_4K);
+	host->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!host->base) {
 		ret = -ENOMEM;
 		goto clk_disable;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index f4cbe473670..bc14bb1b057 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -746,8 +746,6 @@ static int mxcmci_probe(struct platform_device *pdev)
 	}
 
 	mmc->f_min = clk_get_rate(host->clk) >> 16;
-	if (mmc->f_min < 400000)
-		mmc->f_min = 400000;
 	mmc->f_max = clk_get_rate(host->clk) >> 1;
 
 	/* recommended in data sheet */
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index dceb5ee3bda..e7a331de573 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1593,7 +1593,6 @@ static int mmc_omap_resume(struct platform_device *pdev)
 #endif
 
 static struct platform_driver mmc_omap_driver = {
-	.probe		= mmc_omap_probe,
 	.remove		= mmc_omap_remove,
 	.suspend	= mmc_omap_suspend,
 	.resume		= mmc_omap_resume,
@@ -1605,7 +1604,7 @@ static struct platform_driver mmc_omap_driver = {
 
 static int __init mmc_omap_init(void)
 {
-	return platform_driver_register(&mmc_omap_driver);
+	return platform_driver_probe(&mmc_omap_driver, mmc_omap_probe);
 }
 
 static void __exit mmc_omap_exit(void)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index c40cb96255a..1cf9cfb3b64 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1073,7 +1073,6 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
 	mmc->max_seg_size = mmc->max_req_size;
 
-	mmc->ocr_avail = mmc_slot(host).ocr_mask;
 	mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
 
 	if (pdata->slots[host->slot_id].wires >= 8)
@@ -1110,13 +1109,14 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 
+	/* initialize power supplies, gpios, etc */
 	if (pdata->init != NULL) {
 		if (pdata->init(&pdev->dev) != 0) {
-			dev_dbg(mmc_dev(host->mmc),
-				"Unable to configure MMC IRQs\n");
+			dev_dbg(mmc_dev(host->mmc), "late init error\n");
 			goto err_irq_cd_init;
 		}
 	}
+	mmc->ocr_avail = mmc_slot(host).ocr_mask;
 
 	/* Request IRQ for card detect */
 	if ((mmc_slot(host).card_detect_irq)) {
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 430095725f9..d7d7109ef47 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -27,6 +27,7 @@
 #include <linux/err.h>
 #include <linux/mmc/host.h>
 #include <linux/io.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/sizes.h>
 
@@ -67,8 +68,42 @@ struct pxamci_host {
 	unsigned int		dma_dir;
 	unsigned int		dma_drcmrrx;
 	unsigned int		dma_drcmrtx;
+
+	struct regulator	*vcc;
 };
 
+static inline void pxamci_init_ocr(struct pxamci_host *host)
+{
+#ifdef CONFIG_REGULATOR
+	host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
+
+	if (IS_ERR(host->vcc))
+		host->vcc = NULL;
+	else {
+		host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
+		if (host->pdata && host->pdata->ocr_mask)
+			dev_warn(mmc_dev(host->mmc),
+				"ocr_mask/setpower will not be used\n");
+	}
+#endif
+	if (host->vcc == NULL) {
+		/* fall-back to platform data */
+		host->mmc->ocr_avail = host->pdata ?
+			host->pdata->ocr_mask :
+			MMC_VDD_32_33 | MMC_VDD_33_34;
+	}
+}
+
+static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd)
+{
+#ifdef CONFIG_REGULATOR
+	if (host->vcc)
+		mmc_regulator_set_ocr(host->vcc, vdd);
+#endif
+	if (!host->vcc && host->pdata && host->pdata->setpower)
+		host->pdata->setpower(mmc_dev(host->mmc), vdd);
+}
+
 static void pxamci_stop_clock(struct pxamci_host *host)
 {
 	if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
@@ -438,8 +473,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (host->power_mode != ios->power_mode) {
 		host->power_mode = ios->power_mode;
 
-		if (host->pdata && host->pdata->setpower)
-			host->pdata->setpower(mmc_dev(mmc), ios->vdd);
+		pxamci_set_power(host, ios->vdd);
 
 		if (ios->power_mode == MMC_POWER_ON)
 			host->cmdat |= CMDAT_INIT;
@@ -562,9 +596,8 @@ static int pxamci_probe(struct platform_device *pdev)
 	mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
 							  : host->clkrate;
 
-	mmc->ocr_avail = host->pdata ?
-			 host->pdata->ocr_mask :
-			 MMC_VDD_32_33|MMC_VDD_33_34;
+	pxamci_init_ocr(host);
+
 	mmc->caps = 0;
 	host->cmdat = 0;
 	if (!cpu_is_pxa25x()) {
@@ -661,6 +694,9 @@ static int pxamci_remove(struct platform_device *pdev)
 	if (mmc) {
 		struct pxamci_host *host = mmc_priv(mmc);
 
+		if (host->vcc)
+			regulator_put(host->vcc);
+
 		if (host->pdata && host->pdata->exit)
 			host->pdata->exit(&pdev->dev, mmc);
 
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 2db166b7096..4eb4f37544a 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -17,6 +17,7 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
@@ -789,7 +790,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host,
 
 	last_source = source;
 
-	s3c2410_dma_devconfig(host->dma, source, 3,
+	s3c2410_dma_devconfig(host->dma, source,
 			      host->mem->start + host->sdidata);
 
 	if (!setup_ok) {
@@ -1121,7 +1122,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 	default:
 		s3c2410_gpio_setpin(S3C2410_GPE5, 0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
+		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
 
 		if (host->is2440)
 			mci_con |= S3C2440_SDICON_SDRESET;
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
new file mode 100644
index 00000000000..297f40ae6ad
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -0,0 +1,168 @@
+/*
+ * sdhci-pltfm.c Support for SDHCI platform devices
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * SDHCI platform devices
+ *
+ * Inspired by sdhci-pci.c, by Pierre Ossman
+ */
+
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/platform_device.h>
+
+#include <linux/mmc/host.h>
+
+#include <linux/io.h>
+
+#include "sdhci.h"
+
+/*****************************************************************************\
+ *                                                                           *
+ * SDHCI core callbacks                                                      *
+ *                                                                           *
+\*****************************************************************************/
+
+static struct sdhci_ops sdhci_pltfm_ops = {
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Device probing/removal                                                    *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __devinit sdhci_pltfm_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct resource *iomem;
+	int ret;
+
+	BUG_ON(pdev == NULL);
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (resource_size(iomem) != 0x100)
+		dev_err(&pdev->dev, "Invalid iomem size. You may "
+			"experience problems.\n");
+
+	if (pdev->dev.parent)
+		host = sdhci_alloc_host(pdev->dev.parent, 0);
+	else
+		host = sdhci_alloc_host(&pdev->dev, 0);
+
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		goto err;
+	}
+
+	host->hw_name = "platform";
+	host->ops = &sdhci_pltfm_ops;
+	host->irq = platform_get_irq(pdev, 0);
+
+	if (!request_mem_region(iomem->start, resource_size(iomem),
+		mmc_hostname(host->mmc))) {
+		dev_err(&pdev->dev, "cannot request region\n");
+		ret = -EBUSY;
+		goto err_request;
+	}
+
+	host->ioaddr = ioremap(iomem->start, resource_size(iomem));
+	if (!host->ioaddr) {
+		dev_err(&pdev->dev, "failed to remap registers\n");
+		ret = -ENOMEM;
+		goto err_remap;
+	}
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_add_host;
+
+	platform_set_drvdata(pdev, host);
+
+	return 0;
+
+err_add_host:
+	iounmap(host->ioaddr);
+err_remap:
+	release_mem_region(iomem->start, resource_size(iomem));
+err_request:
+	sdhci_free_host(host);
+err:
+	printk(KERN_ERR"Probing of sdhci-pltfm failed: %d\n", ret);
+	return ret;
+}
+
+static int __devexit sdhci_pltfm_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int dead;
+	u32 scratch;
+
+	dead = 0;
+	scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
+	if (scratch == (u32)-1)
+		dead = 1;
+
+	sdhci_remove_host(host, dead);
+	iounmap(host->ioaddr);
+	release_mem_region(iomem->start, resource_size(iomem));
+	sdhci_free_host(host);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver sdhci_pltfm_driver = {
+	.driver = {
+		.name	= "sdhci",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= sdhci_pltfm_probe,
+	.remove		= __devexit_p(sdhci_pltfm_remove),
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Driver init/exit                                                          *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __init sdhci_drv_init(void)
+{
+	return platform_driver_register(&sdhci_pltfm_driver);
+}
+
+static void __exit sdhci_drv_exit(void)
+{
+	platform_driver_unregister(&sdhci_pltfm_driver);
+}
+
+module_init(sdhci_drv_init);
+module_exit(sdhci_drv_exit);
+
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver");
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sdhci");
+
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9234be2226e..35789c6edc1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -78,6 +78,11 @@ static void sdhci_dumpregs(struct sdhci_host *host)
 		sdhci_readl(host, SDHCI_CAPABILITIES),
 		sdhci_readl(host, SDHCI_MAX_CURRENT));
 
+	if (host->flags & SDHCI_USE_ADMA)
+		printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+		       readl(host->ioaddr + SDHCI_ADMA_ERROR),
+		       readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+
 	printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
 }
 
@@ -1005,12 +1010,34 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 {
 	u8 pwr;
 
-	if (host->power == power)
+	if (power == (unsigned short)-1)
+		pwr = 0;
+	else {
+		switch (1 << power) {
+		case MMC_VDD_165_195:
+			pwr = SDHCI_POWER_180;
+			break;
+		case MMC_VDD_29_30:
+		case MMC_VDD_30_31:
+			pwr = SDHCI_POWER_300;
+			break;
+		case MMC_VDD_32_33:
+		case MMC_VDD_33_34:
+			pwr = SDHCI_POWER_330;
+			break;
+		default:
+			BUG();
+		}
+	}
+
+	if (host->pwr == pwr)
 		return;
 
-	if (power == (unsigned short)-1) {
+	host->pwr = pwr;
+
+	if (pwr == 0) {
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
-		goto out;
+		return;
 	}
 
 	/*
@@ -1020,35 +1047,16 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 
-	pwr = SDHCI_POWER_ON;
-
-	switch (1 << power) {
-	case MMC_VDD_165_195:
-		pwr |= SDHCI_POWER_180;
-		break;
-	case MMC_VDD_29_30:
-	case MMC_VDD_30_31:
-		pwr |= SDHCI_POWER_300;
-		break;
-	case MMC_VDD_32_33:
-	case MMC_VDD_33_34:
-		pwr |= SDHCI_POWER_330;
-		break;
-	default:
-		BUG();
-	}
-
 	/*
 	 * At least the Marvell CaFe chip gets confused if we set the voltage
 	 * and set turn on power at the same time, so set the voltage first.
 	 */
 	if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
-		sdhci_writeb(host, pwr & ~SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
+		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 
-	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+	pwr |= SDHCI_POWER_ON;
 
-out:
-	host->power = power;
+	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 }
 
 /*****************************************************************************\
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 65c6f996bbd..2de08349c3c 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -255,7 +255,7 @@ struct sdhci_host {
 	unsigned int		timeout_clk;	/* Timeout freq (KHz) */
 
 	unsigned int		clock;		/* Current clock (MHz) */
-	unsigned short		power;		/* Current voltage */
+	u8			pwr;		/* Current voltage */
 
 	struct mmc_request	*mrq;		/* Current request */
 	struct mmc_command	*cmd;		/* Current command */
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 63fbd5b7d31..91991b460c4 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -10,7 +10,7 @@
  *
  * Driver for the MMC / SD / SDIO cell found in:
  *
- * TC6393XB TC6391XB TC6387XB T7L66XB
+ * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
  *
  * This driver draws mainly on scattered spec sheets, Reverse engineering
  * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
@@ -35,69 +35,47 @@
 
 #include "tmio_mmc.h"
 
-/*
- * Fixme - documentation conflicts on what the clock values are for the
- * various dividers.
- * One document I have says that its a divisor of a 24MHz clock, another 33.
- * This probably depends on HCLK for a given platform, so we may need to
- * require HCLK be passed to us from the MFD core.
- *
- */
-
 static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
 {
-	void __iomem *cnf = host->cnf;
-	void __iomem *ctl = host->ctl;
 	u32 clk = 0, clock;
 
 	if (new_clock) {
-		for (clock = 46875, clk = 0x100; new_clock >= (clock<<1); ) {
+		for (clock = host->mmc->f_min, clk = 0x80000080;
+			new_clock >= (clock<<1); clk >>= 1)
 			clock <<= 1;
-			clk >>= 1;
-		}
-		if (clk & 0x1)
-			clk = 0x20000;
-
-		clk >>= 2;
-		tmio_iowrite8((clk & 0x8000) ? 0 : 1, cnf + CNF_SD_CLK_MODE);
 		clk |= 0x100;
 	}
 
-	tmio_iowrite16(clk, ctl + CTL_SD_CARD_CLK_CTL);
+	sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
 }
 
 static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
-
-	tmio_iowrite16(0x0000, ctl + CTL_CLK_AND_WAIT_CTL);
+	sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
 	msleep(10);
-	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) & ~0x0100,
-	       ctl + CTL_SD_CARD_CLK_CTL);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
+		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 	msleep(10);
 }
 
 static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
-
-	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) | 0x0100,
-	       ctl + CTL_SD_CARD_CLK_CTL);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
+		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 	msleep(10);
-	tmio_iowrite16(0x0100, ctl + CTL_CLK_AND_WAIT_CTL);
+	sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
 	msleep(10);
 }
 
 static void reset(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
-
 	/* FIXME - should we set stop clock reg here */
-	tmio_iowrite16(0x0000, ctl + CTL_RESET_SD);
-	tmio_iowrite16(0x0000, ctl + CTL_RESET_SDIO);
+	sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
+	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
 	msleep(10);
-	tmio_iowrite16(0x0001, ctl + CTL_RESET_SD);
-	tmio_iowrite16(0x0001, ctl + CTL_RESET_SDIO);
+	sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
+	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
 	msleep(10);
 }
 
@@ -129,13 +107,12 @@ tmio_mmc_finish_request(struct tmio_mmc_host *host)
 static int
 tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
 {
-	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
 	int c = cmd->opcode;
 
 	/* Command 12 is handled by hardware */
 	if (cmd->opcode == 12 && !cmd->arg) {
-		tmio_iowrite16(0x001, ctl + CTL_STOP_INTERNAL_ACTION);
+		sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
 		return 0;
 	}
 
@@ -160,18 +137,18 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
 	if (data) {
 		c |= DATA_PRESENT;
 		if (data->blocks > 1) {
-			tmio_iowrite16(0x100, ctl + CTL_STOP_INTERNAL_ACTION);
+			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
 			c |= TRANSFER_MULTI;
 		}
 		if (data->flags & MMC_DATA_READ)
 			c |= TRANSFER_READ;
 	}
 
-	enable_mmc_irqs(ctl, TMIO_MASK_CMD);
+	enable_mmc_irqs(host, TMIO_MASK_CMD);
 
 	/* Fire off the command */
-	tmio_iowrite32(cmd->arg, ctl + CTL_ARG_REG);
-	tmio_iowrite16(c, ctl + CTL_SD_CMD);
+	sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
+	sd_ctrl_write16(host, CTL_SD_CMD, c);
 
 	return 0;
 }
@@ -183,7 +160,6 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
  */
 static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
 	unsigned short *buf;
 	unsigned int count;
@@ -206,9 +182,9 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 
 	/* Transfer the data */
 	if (data->flags & MMC_DATA_READ)
-		tmio_ioread16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+		sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
 	else
-		tmio_iowrite16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+		sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
 
 	host->sg_off += count;
 
@@ -222,7 +198,6 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 
 static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
 	struct mmc_command *stop;
 
@@ -251,13 +226,13 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 	 */
 
 	if (data->flags & MMC_DATA_READ)
-		disable_mmc_irqs(ctl, TMIO_MASK_READOP);
+		disable_mmc_irqs(host, TMIO_MASK_READOP);
 	else
-		disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+		disable_mmc_irqs(host, TMIO_MASK_WRITEOP);
 
 	if (stop) {
 		if (stop->opcode == 12 && !stop->arg)
-			tmio_iowrite16(0x000, ctl + CTL_STOP_INTERNAL_ACTION);
+			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
 		else
 			BUG();
 	}
@@ -268,9 +243,8 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 	unsigned int stat)
 {
-	void __iomem *ctl = host->ctl, *addr;
 	struct mmc_command *cmd = host->cmd;
-	int i;
+	int i, addr;
 
 	if (!host->cmd) {
 		pr_debug("Spurious CMD irq\n");
@@ -284,8 +258,8 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 	 * modify the order of the response for short response command types.
 	 */
 
-	for (i = 3, addr = ctl + CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
-		cmd->resp[i] = tmio_ioread32(addr);
+	for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
+		cmd->resp[i] = sd_ctrl_read32(host, addr);
 
 	if (cmd->flags &  MMC_RSP_136) {
 		cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
@@ -307,9 +281,9 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 	 */
 	if (host->data && !cmd->error) {
 		if (host->data->flags & MMC_DATA_READ)
-			enable_mmc_irqs(ctl, TMIO_MASK_READOP);
+			enable_mmc_irqs(host, TMIO_MASK_READOP);
 		else
-			enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+			enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
 	} else {
 		tmio_mmc_finish_request(host);
 	}
@@ -321,20 +295,19 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 static irqreturn_t tmio_mmc_irq(int irq, void *devid)
 {
 	struct tmio_mmc_host *host = devid;
-	void __iomem *ctl = host->ctl;
 	unsigned int ireg, irq_mask, status;
 
 	pr_debug("MMC IRQ begin\n");
 
-	status = tmio_ioread32(ctl + CTL_STATUS);
-	irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+	status = sd_ctrl_read32(host, CTL_STATUS);
+	irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
 	ireg = status & TMIO_MASK_IRQ & ~irq_mask;
 
 	pr_debug_status(status);
 	pr_debug_status(ireg);
 
 	if (!ireg) {
-		disable_mmc_irqs(ctl, status & ~irq_mask);
+		disable_mmc_irqs(host, status & ~irq_mask);
 
 		pr_debug("tmio_mmc: Spurious irq, disabling! "
 			"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
@@ -346,7 +319,7 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid)
 	while (ireg) {
 		/* Card insert / remove attempts */
 		if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
-			ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT |
+			ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
 				TMIO_STAT_CARD_REMOVE);
 			mmc_detect_change(host->mmc, 0);
 		}
@@ -358,25 +331,25 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid)
 
 		/* Command completion */
 		if (ireg & TMIO_MASK_CMD) {
-			ack_mmc_irqs(ctl, TMIO_MASK_CMD);
+			ack_mmc_irqs(host, TMIO_MASK_CMD);
 			tmio_mmc_cmd_irq(host, status);
 		}
 
 		/* Data transfer */
 		if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
-			ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
+			ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
 			tmio_mmc_pio_irq(host);
 		}
 
 		/* Data transfer completion */
 		if (ireg & TMIO_STAT_DATAEND) {
-			ack_mmc_irqs(ctl, TMIO_STAT_DATAEND);
+			ack_mmc_irqs(host, TMIO_STAT_DATAEND);
 			tmio_mmc_data_irq(host);
 		}
 
 		/* Check status - keep going until we've handled it all */
-		status = tmio_ioread32(ctl + CTL_STATUS);
-		irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+		status = sd_ctrl_read32(host, CTL_STATUS);
+		irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
 		ireg = status & TMIO_MASK_IRQ & ~irq_mask;
 
 		pr_debug("Status at end of loop: %08x\n", status);
@@ -391,8 +364,6 @@ out:
 static int tmio_mmc_start_data(struct tmio_mmc_host *host,
 	struct mmc_data *data)
 {
-	void __iomem *ctl = host->ctl;
-
 	pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
 	    data->blksz, data->blocks);
 
@@ -407,8 +378,8 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
 	host->data = data;
 
 	/* Set transfer length / blocksize */
-	tmio_iowrite16(data->blksz,  ctl + CTL_SD_XFER_LEN);
-	tmio_iowrite16(data->blocks, ctl + CTL_XFER_BLK_COUNT);
+	sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
+	sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
 
 	return 0;
 }
@@ -449,8 +420,6 @@ fail:
 static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	void __iomem *cnf = host->cnf;
-	void __iomem *ctl = host->ctl;
 
 	if (ios->clock)
 		tmio_mmc_set_clock(host, ios->clock);
@@ -458,12 +427,12 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	/* Power sequence - OFF -> ON -> UP */
 	switch (ios->power_mode) {
 	case MMC_POWER_OFF: /* power down SD bus */
-		tmio_iowrite8(0x00, cnf + CNF_PWR_CTL_2);
+		sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
 		tmio_mmc_clk_stop(host);
 		break;
 	case MMC_POWER_ON: /* power up SD bus */
 
-		tmio_iowrite8(0x02, cnf + CNF_PWR_CTL_2);
+		sd_config_write8(host, CNF_PWR_CTL_2, 0x02);
 		break;
 	case MMC_POWER_UP: /* start bus clock */
 		tmio_mmc_clk_start(host);
@@ -472,10 +441,10 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	switch (ios->bus_width) {
 	case MMC_BUS_WIDTH_1:
-		tmio_iowrite16(0x80e0, ctl + CTL_SD_MEM_CARD_OPT);
+		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
 	break;
 	case MMC_BUS_WIDTH_4:
-		tmio_iowrite16(0x00e0, ctl + CTL_SD_MEM_CARD_OPT);
+		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
 	break;
 	}
 
@@ -486,9 +455,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 static int tmio_mmc_get_ro(struct mmc_host *mmc)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	void __iomem *ctl = host->ctl;
 
-	return (tmio_ioread16(ctl + CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
+	return (sd_ctrl_read16(host, CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
 }
 
 static struct mmc_host_ops tmio_mmc_ops = {
@@ -518,13 +486,8 @@ static int tmio_mmc_resume(struct platform_device *dev)
 	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
 	struct mmc_host *mmc = platform_get_drvdata(dev);
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	void __iomem *cnf = host->cnf;
 	int ret = 0;
 
-	/* Enable the MMC/SD Control registers */
-	tmio_iowrite16(SDCREN, cnf + CNF_CMD);
-	tmio_iowrite32(dev->resource[0].start & 0xfffe, cnf + CNF_CTL_BASE);
-
 	/* Tell the MFD core we are ready to be enabled */
 	if (cell->enable) {
 		ret = cell->enable(dev);
@@ -532,6 +495,11 @@ static int tmio_mmc_resume(struct platform_device *dev)
 			goto out;
 	}
 
+	/* Enable the MMC/SD Control registers */
+	sd_config_write16(host, CNF_CMD, SDCREN);
+	sd_config_write32(host, CNF_CTL_BASE,
+		(dev->resource[0].start >> host->bus_shift) & 0xfffe);
+
 	mmc_resume_host(mmc);
 
 out:
@@ -545,20 +513,25 @@ out:
 static int __devinit tmio_mmc_probe(struct platform_device *dev)
 {
 	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct tmio_mmc_data *pdata;
 	struct resource *res_ctl, *res_cnf;
 	struct tmio_mmc_host *host;
 	struct mmc_host *mmc;
-	int ret = -ENOMEM;
+	int ret = -EINVAL;
 
 	if (dev->num_resources != 3)
 		goto out;
 
 	res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
-	if (!res_ctl || !res_cnf) {
-		ret = -EINVAL;
+	if (!res_ctl || !res_cnf)
 		goto out;
-	}
+
+	pdata = cell->driver_data;
+	if (!pdata || !pdata->hclk)
+		goto out;
+
+	ret = -ENOMEM;
 
 	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev);
 	if (!mmc)
@@ -568,6 +541,9 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 	host->mmc = mmc;
 	platform_set_drvdata(dev, mmc);
 
+	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
+	host->bus_shift = resource_size(res_ctl) >> 10;
+
 	host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
 	if (!host->ctl)
 		goto host_free;
@@ -578,15 +554,10 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 
 	mmc->ops = &tmio_mmc_ops;
 	mmc->caps = MMC_CAP_4_BIT_DATA;
-	mmc->f_min = 46875; /* 24000000 / 512 */
-	mmc->f_max = 24000000;
+	mmc->f_max = pdata->hclk;
+	mmc->f_min = mmc->f_max / 512;
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 
-	/* Enable the MMC/SD Control registers */
-	tmio_iowrite16(SDCREN, host->cnf + CNF_CMD);
-	tmio_iowrite32(dev->resource[0].start & 0xfffe,
-		host->cnf + CNF_CTL_BASE);
-
 	/* Tell the MFD core we are ready to be enabled */
 	if (cell->enable) {
 		ret = cell->enable(dev);
@@ -594,14 +565,19 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 			goto unmap_cnf;
 	}
 
+	/* Enable the MMC/SD Control registers */
+	sd_config_write16(host, CNF_CMD, SDCREN);
+	sd_config_write32(host, CNF_CTL_BASE,
+		(dev->resource[0].start >> host->bus_shift) & 0xfffe);
+
 	/* Disable SD power during suspend */
-	tmio_iowrite8(0x01, host->cnf + CNF_PWR_CTL_3);
+	sd_config_write8(host, CNF_PWR_CTL_3, 0x01);
 
 	/* The below is required but why? FIXME */
-	tmio_iowrite8(0x1f, host->cnf + CNF_STOP_CLK_CTL);
+	sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f);
 
 	/* Power down SD bus*/
-	tmio_iowrite8(0x0,  host->cnf + CNF_PWR_CTL_2);
+	sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
 
 	tmio_mmc_clk_stop(host);
 	reset(host);
@@ -612,22 +588,20 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 	else
 		goto unmap_cnf;
 
-	disable_mmc_irqs(host->ctl, TMIO_MASK_ALL);
+	disable_mmc_irqs(host, TMIO_MASK_ALL);
 
-	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc",
-		host);
+	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED |
+		IRQF_TRIGGER_FALLING, "tmio-mmc", host);
 	if (ret)
 		goto unmap_cnf;
 
-	set_irq_type(host->irq, IRQ_TYPE_EDGE_FALLING);
-
 	mmc_add_host(mmc);
 
 	printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
 	       (unsigned long)host->ctl, host->irq);
 
 	/* Unmask the IRQs we want to know about */
-	enable_mmc_irqs(host->ctl,  TMIO_MASK_IRQ);
+	enable_mmc_irqs(host, TMIO_MASK_IRQ);
 
 	return 0;
 
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 9c831ab2ece..9fa99859497 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -83,34 +83,36 @@
 		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
 #define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
 
-#define enable_mmc_irqs(ctl, i) \
+
+#define enable_mmc_irqs(host, i) \
 	do { \
 		u32 mask;\
-		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask  = sd_ctrl_read32((host), CTL_IRQ_MASK); \
 		mask &= ~((i) & TMIO_MASK_IRQ); \
-		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+		sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
 	} while (0)
 
-#define disable_mmc_irqs(ctl, i) \
+#define disable_mmc_irqs(host, i) \
 	do { \
 		u32 mask;\
-		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask  = sd_ctrl_read32((host), CTL_IRQ_MASK); \
 		mask |= ((i) & TMIO_MASK_IRQ); \
-		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+		sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
 	} while (0)
 
-#define ack_mmc_irqs(ctl, i) \
+#define ack_mmc_irqs(host, i) \
 	do { \
 		u32 mask;\
-		mask  = tmio_ioread32((ctl) + CTL_STATUS); \
+		mask  = sd_ctrl_read32((host), CTL_STATUS); \
 		mask &= ~((i) & TMIO_MASK_IRQ); \
-		tmio_iowrite32(mask, (ctl) + CTL_STATUS); \
+		sd_ctrl_write32((host), CTL_STATUS, mask); \
 	} while (0)
 
 
 struct tmio_mmc_host {
 	void __iomem *cnf;
 	void __iomem *ctl;
+	unsigned long bus_shift;
 	struct mmc_command      *cmd;
 	struct mmc_request      *mrq;
 	struct mmc_data         *data;
@@ -123,6 +125,63 @@ struct tmio_mmc_host {
 	unsigned int            sg_off;
 };
 
+#include <linux/io.h>
+
+static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
+{
+	return readw(host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
+		u16 *buf, int count)
+{
+	readsw(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
+{
+	return readw(host->ctl + (addr << host->bus_shift)) |
+	       readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
+}
+
+static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr,
+		u16 val)
+{
+	writew(val, host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
+		u16 *buf, int count)
+{
+	writesw(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr,
+		u32 val)
+{
+	writew(val, host->ctl + (addr << host->bus_shift));
+	writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
+}
+
+static inline void sd_config_write8(struct tmio_mmc_host *host, int addr,
+		u8 val)
+{
+	writeb(val, host->cnf + (addr << host->bus_shift));
+}
+
+static inline void sd_config_write16(struct tmio_mmc_host *host, int addr,
+		u16 val)
+{
+	writew(val, host->cnf + (addr << host->bus_shift));
+}
+
+static inline void sd_config_write32(struct tmio_mmc_host *host, int addr,
+		u32 val)
+{
+	writew(val, host->cnf + (addr << host->bus_shift));
+	writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift));
+}
+
 #include <linux/scatterlist.h>
 #include <linux/blkdev.h>
 
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 7d04fb9ddca..b8e35a0b4d7 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -154,7 +154,8 @@ config MTD_AFS_PARTS
 
 	  You will still need the parsing functions to be called by the driver
 	  for your particular device. It won't happen automatically. The
-	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+	  'armflash' map driver (CONFIG_MTD_ARM_INTEGRATOR) does this, for
+	  example.
 
 config MTD_OF_PARTS
 	tristate "Flash partition map based on OF description"
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 6fde0a2e356..325fab92a62 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -49,7 +49,7 @@ config MTD_MS02NV
 	  If you want to compile this driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.
-	  The module will be called ms02-nv.ko.
+	  The module will be called ms02-nv.
 
 config MTD_DATAFLASH
 	tristate "Support for AT45xxx DataFlash"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 890936d0275..f3276897859 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -260,7 +260,7 @@ config MTD_NAND_BASLER_EXCITE
 	help
           This enables the driver for the NAND flash device found on the
           Basler eXcite Smart Camera. If built as a module, the driver
-          will be named "excite_nandflash.ko".
+          will be named excite_nandflash.
 
 config MTD_NAND_CAFE
 	tristate "NAND support for OLPC CAFÉ chip"
@@ -282,7 +282,7 @@ config MTD_NAND_CS553X
 	  controller is enabled for NAND, and currently requires that
 	  the controller be in MMIO mode.
 
-	  If you say "m", the module will be called "cs553x_nand.ko".
+	  If you say "m", the module will be called cs553x_nand.
 
 config MTD_NAND_ATMEL
 	tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index f2e9de1414d..6391e3dc800 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -39,7 +39,6 @@
 #include <mach/gpmc.h>
 #include <mach/onenand.h>
 #include <mach/gpio.h>
-#include <mach/pm.h>
 
 #include <mach/dma.h>
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f3c4a3b910b..3111b6c7cbc 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1880,7 +1880,7 @@ config FEC_MPC52xx
 	---help---
 	  This option enables support for the MPC5200's on-chip
 	  Fast Ethernet Controller
-	  If compiled as module, it will be called 'fec_mpc52xx.ko'.
+	  If compiled as module, it will be called fec_mpc52xx.
 
 config FEC_MPC52xx_MDIO
 	bool "MPC52xx FEC MDIO bus driver"
@@ -1892,7 +1892,7 @@ config FEC_MPC52xx_MDIO
 	  (Motorola? industry standard).
 	  If your board uses an external PHY connected to FEC, enable this.
 	  If not sure, enable.
-	  If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
+	  If compiled as module, it will be called fec_mpc52xx_phy.
 
 config NE_H8300
 	tristate "NE2000 compatible support for H8/300"
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 78cc7146913..b642647170b 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1220,7 +1220,7 @@ static int __init ltpc_setup(char *str)
 		if (ints[0] > 2) {
 			dma = ints[3];
 		}
-		/* ignore any other paramters */
+		/* ignore any other parameters */
 	}
 	return 1;
 }
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index a740053d3af..b6d188115ca 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -456,7 +456,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
 	debug_desc(phys, desc);
 	BUG_ON(phys & 0x1F);
 	qmgr_put_entry(queue, phys);
-	BUG_ON(qmgr_stat_overflow(queue));
+	/* Don't check for queue overflow here, we've allocated sufficient
+	   length and queues >= 32 don't support this check anyway. */
 }
 
 
@@ -512,8 +513,8 @@ static int eth_poll(struct napi_struct *napi, int budget)
 #endif
 			napi_complete(napi);
 			qmgr_enable_irq(rxq);
-			if (!qmgr_stat_empty(rxq) &&
-			    napi_reschedule(napi)) {
+			if (!qmgr_stat_below_low_watermark(rxq) &&
+			    napi_reschedule(napi)) { /* not empty again */
 #if DEBUG_RX
 				printk(KERN_DEBUG "%s: eth_poll"
 				       " napi_reschedule successed\n",
@@ -630,9 +631,9 @@ static void eth_txdone_irq(void *unused)
 			port->tx_buff_tab[n_desc] = NULL;
 		}
 
-		start = qmgr_stat_empty(port->plat->txreadyq);
+		start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
 		queue_put_desc(port->plat->txreadyq, phys, desc);
-		if (start) {
+		if (start) { /* TX-ready queue was empty */
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
 			       port->netdev->name);
@@ -708,13 +709,14 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
 	dev->trans_start = jiffies;
 
-	if (qmgr_stat_empty(txreadyq)) {
+	if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
 #if DEBUG_TX
 		printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
 #endif
 		netif_stop_queue(dev);
 		/* we could miss TX ready interrupt */
-		if (!qmgr_stat_empty(txreadyq)) {
+		/* really empty in fact */
+		if (!qmgr_stat_below_low_watermark(txreadyq)) {
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: eth_xmit ready again\n",
 			       dev->name);
@@ -814,29 +816,29 @@ static int request_queues(struct port *port)
 	int err;
 
 	err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0,
-			    "%s:RX-free", port->netdev->name);
+				 "%s:RX-free", port->netdev->name);
 	if (err)
 		return err;
 
 	err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0,
-			    "%s:RX", port->netdev->name);
+				 "%s:RX", port->netdev->name);
 	if (err)
 		goto rel_rxfree;
 
 	err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0,
-			    "%s:TX", port->netdev->name);
+				 "%s:TX", port->netdev->name);
 	if (err)
 		goto rel_rx;
 
 	err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0,
-			    "%s:TX-ready", port->netdev->name);
+				 "%s:TX-ready", port->netdev->name);
 	if (err)
 		goto rel_tx;
 
 	/* TX-done queue handles skbs sent out by the NPEs */
 	if (!ports_open) {
 		err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0,
-				    "%s:TX-done", DRV_NAME);
+					 "%s:TX-done", DRV_NAME);
 		if (err)
 			goto rel_txready;
 	}
diff --git a/drivers/net/b44.h b/drivers/net/b44.h
index e678498de6d..d24158e7f30 100644
--- a/drivers/net/b44.h
+++ b/drivers/net/b44.h
@@ -97,7 +97,7 @@
 #define B44_DMARX_STAT	0x021CUL /* DMA RX Current Active Desc. + Status */
 #define  DMARX_STAT_CDMASK	0x00000fff /* Current Descriptor Mask */
 #define  DMARX_STAT_SMASK	0x0000f000 /* State Mask */
-#define  DMARX_STAT_SDISABLED	0x00000000 /* State Disbaled */
+#define  DMARX_STAT_SDISABLED	0x00000000 /* State Disabled */
 #define  DMARX_STAT_SACTIVE	0x00001000 /* State Active */
 #define  DMARX_STAT_SIDLE	0x00002000 /* State Idle Wait */
 #define  DMARX_STAT_SSTOPPED	0x00003000 /* State Stopped */
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 0f9ee134855..af5364f4955 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2785,7 +2785,7 @@ static int e100_resume(struct pci_dev *pdev)
 	/* ack any pending wake events, disable PME */
 	pci_enable_wake(pdev, 0, 0);
 
-	/* disbale reverse auto-negotiation */
+	/* disable reverse auto-negotiation */
 	if (nic->phy == phy_82552_v) {
 		u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
 		                           E100_82552_SMARTSPEED);
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index f37360aa12a..44f0bf23daf 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -62,7 +62,7 @@ struct e1000_info;
 	e_printk(KERN_NOTICE, adapter, format, ## arg)
 
 
-/* Interrupt modes, as used by the IntMode paramter */
+/* Interrupt modes, as used by the IntMode parameter */
 #define E1000E_INT_MODE_LEGACY		0
 #define E1000E_INT_MODE_MSI		1
 #define E1000E_INT_MODE_MSIX		2
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 16a41389575..78952f8324e 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -268,7 +268,7 @@ struct ehea_qp_init_attr {
 };
 
 /*
- * Event Queue attributes, passed as paramter
+ * Event Queue attributes, passed as parameter
  */
 struct ehea_eq_attr {
 	u32 type;
diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/igbvf/igbvf.h
index 4bff35e4687..d488733893a 100644
--- a/drivers/net/igbvf/igbvf.h
+++ b/drivers/net/igbvf/igbvf.h
@@ -45,7 +45,7 @@ struct igbvf_adapter;
 /* Interrupt defines */
 #define IGBVF_START_ITR                 648 /* ~6000 ints/sec */
 
-/* Interrupt modes, as used by the IntMode paramter */
+/* Interrupt modes, as used by the IntMode parameter */
 #define IGBVF_INT_MODE_LEGACY           0
 #define IGBVF_INT_MODE_MSI              1
 #define IGBVF_INT_MODE_MSIX             2
diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index dd9318f1949..dfc2541bb55 100644
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -514,7 +514,7 @@ enum ipg_regs {
 #define		IPG_DMALIST_ALIGN_PAD	0x07
 #define		IPG_MULTICAST_HASHTABLE_SIZE	0x40
 
-/* Number of miliseconds to wait after issuing a software reset.
+/* Number of milliseconds to wait after issuing a software reset.
  * 0x05 <= IPG_AC_RESETWAIT to account for proper 10Mbps operation.
  */
 #define         IPG_AC_RESETWAIT             0x05
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 7bcc49de163..e8eeef0c9c9 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -371,7 +371,7 @@ static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
 	int i;
 
 	/* If we haven't received a specific coalescing setting
-	 * (module param), we set the moderation paramters as follows:
+	 * (module param), we set the moderation parameters as follows:
 	 * - moder_cnt is set to the number of mtu sized packets to
 	 *   satisfy our coelsing target.
 	 * - moder_time is set to a fixed value.
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index 8754e44cada..3bd0b5933d5 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -3242,8 +3242,8 @@ struct niu {
 	struct niu_parent		*parent;
 
 	u32				flags;
-#define NIU_FLAGS_HOTPLUG_PHY_PRESENT	0x02000000 /* Removebale PHY detected*/
-#define NIU_FLAGS_HOTPLUG_PHY		0x01000000 /* Removebale PHY */
+#define NIU_FLAGS_HOTPLUG_PHY_PRESENT	0x02000000 /* Removeable PHY detected*/
+#define NIU_FLAGS_HOTPLUG_PHY		0x01000000 /* Removeable PHY */
 #define NIU_FLAGS_VPD_VALID		0x00800000 /* VPD has valid version */
 #define NIU_FLAGS_MSIX			0x00400000 /* MSI-X in use */
 #define NIU_FLAGS_MCAST			0x00200000 /* multicast filter enabled */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c92ced24794..1fd5ecb2442 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3174,7 +3174,7 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 
 	if (value & RST_FO_FR) {
 		QPRINTK(qdev, IFDOWN, ERR,
-			"ETIMEOUT!!! errored out of resetting the chip!\n");
+			"ETIMEDOUT!!! errored out of resetting the chip!\n");
 		status = -ETIMEDOUT;
 	}
 
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 9f81b797f10..ac9493f6c1a 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -141,7 +141,7 @@ end:
 /* We are being asked by firmware to accept
  * a change to the port.  This is only
  * a change to max frame sizes (Tx/Rx), pause
- * paramters, or loopback mode. We wake up a worker
+ * parameters, or loopback mode. We wake up a worker
  * to handler processing this since a mailbox command
  * will need to be sent to ACK the request.
  */
@@ -371,7 +371,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	/* We are being asked by firmware to accept
 	 * a change to the port.  This is only
 	 * a change to max frame sizes (Tx/Rx), pause
-	 * paramters, or loopback mode.
+	 * parameters, or loopback mode.
 	 */
 	case AEN_IDC_REQ:
 		status = ql_idc_req_aen(qdev);
@@ -380,7 +380,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	/* Process and inbound IDC event.
 	 * This will happen when we're trying to
 	 * change tx/rx max frame size, change pause
-	 * paramters or loopback mode.
+	 * parameters or loopback mode.
 	 */
 	case AEN_IDC_CMPLT:
 	case AEN_IDC_EXT:
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h
index 1ff589988d1..2976757a36f 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/skfp/h/smt.h
@@ -413,7 +413,7 @@ struct smt_p_reason {
 #define SMT_RDF_SUCCESS	0x00000003	/* success (PMF) */
 #define SMT_RDF_BADSET	0x00000004	/* bad set count (PMF) */
 #define SMT_RDF_ILLEGAL 0x00000005	/* read only (PMF) */
-#define SMT_RDF_NOPARAM	0x6		/* paramter not supported (PMF) */
+#define SMT_RDF_NOPARAM	0x6		/* parameter not supported (PMF) */
 #define SMT_RDF_RANGE	0x8		/* out of range */
 #define SMT_RDF_AUTHOR	0x9		/* not autohorized */
 #define SMT_RDF_LENGTH	0x0a		/* length error */
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 329f890e290..f1f773b17fe 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -45,7 +45,8 @@
     defined(CONFIG_MACH_ZYLONITE) ||\
     defined(CONFIG_MACH_LITTLETON) ||\
     defined(CONFIG_MACH_ZYLONITE2) ||\
-    defined(CONFIG_ARCH_VIPER)
+    defined(CONFIG_ARCH_VIPER) ||\
+    defined(CONFIG_MACH_STARGATE2)
 
 #include <asm/mach-types.h>
 
@@ -73,7 +74,7 @@
 /* We actually can't write halfwords properly if not word aligned */
 static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 {
-	if (machine_is_mainstone() && reg & 2) {
+	if ((machine_is_mainstone() || machine_is_stargate2()) && reg & 2) {
 		unsigned int v = val << 16;
 		v |= readl(ioaddr + (reg & ~2)) & 0xffff;
 		writel(v, ioaddr + (reg & ~2));
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 534c0f38483..0337b9d673f 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -79,7 +79,7 @@ MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
 MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
 MODULE_FIRMWARE(FW_NAME);
 
-/* Module paramters */
+/* Module parameters */
 
 /* Ring Speed 0,4,16 
  * 0 = Autosense   
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 2e70ee8f145..46a2cc92d97 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -169,7 +169,7 @@ static char *open_min_error[] = {
 	"Monitor Contention failer for RPL", "FDX Protocol Error"
 };
 
-/* Module paramters */
+/* Module parameters */
 
 /* Ring Speed 0,4,16
  * 0 = Autosense         
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index d068a9d3688..2d819fc8558 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -132,7 +132,7 @@ static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost",
 				   "Reserved", "Reserved", "No Monitor Detected for RPL", 
 				   "Monitor Contention failer for RPL", "FDX Protocol Error"};
 
-/* Module paramters */
+/* Module parameters */
 
 MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ; 
 MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ; 
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6fcb500257b..61fe80dda3e 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -7,7 +7,7 @@
  *
  * Limitation:
  * Can only get/set setttings of the first queue.
- * Need to re-open the interface manually after changing some paramters.
+ * Need to re-open the interface manually after changing some parameters.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f3a2fce6166..47f68cfa7e2 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -398,7 +398,7 @@ static void rx_complete (struct urb *urb)
 
 	/* stalls need manual reset. this is rare ... except that
 	 * when going through USB 2.0 TTs, unplug appears this way.
-	 * we avoid the highspeed version of the ETIMEOUT/EILSEQ
+	 * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
 	 * storm, recovering as needed.
 	 */
 	case -EPIPE:
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 765a7f5d6aa..a6dc317083d 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -579,7 +579,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
 	debug_desc(phys, desc);
 	BUG_ON(phys & 0x1F);
 	qmgr_put_entry(queue, phys);
-	BUG_ON(qmgr_stat_overflow(queue));
+	/* Don't check for queue overflow here, we've allocated sufficient
+	   length and queues >= 32 don't support this check anyway. */
 }
 
 
@@ -789,10 +790,10 @@ static void hss_hdlc_txdone_irq(void *pdev)
 		free_buffer_irq(port->tx_buff_tab[n_desc]);
 		port->tx_buff_tab[n_desc] = NULL;
 
-		start = qmgr_stat_empty(port->plat->txreadyq);
+		start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
 		queue_put_desc(port->plat->txreadyq,
 			       tx_desc_phys(port, n_desc), desc);
-		if (start) {
+		if (start) { /* TX-ready queue was empty */
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
 			       " ready\n", dev->name);
@@ -867,13 +868,13 @@ static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
 	queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
 	dev->trans_start = jiffies;
 
-	if (qmgr_stat_empty(txreadyq)) {
+	if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
 #if DEBUG_TX
 		printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
 #endif
 		netif_stop_queue(dev);
 		/* we could miss TX ready interrupt */
-		if (!qmgr_stat_empty(txreadyq)) {
+		if (!qmgr_stat_below_low_watermark(txreadyq)) {
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
 			       dev->name);
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 3d94e7dfea6..3359497012a 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -310,7 +310,7 @@ config PRISM54
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.
-	  The module will be called prism54.ko.
+	  The module will be called prism54.
 
 config USB_ZD1201
 	tristate "USB ZD1201 based Wireless device support"
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig
index 932d207bce2..c15db229351 100644
--- a/drivers/net/wireless/hostap/Kconfig
+++ b/drivers/net/wireless/hostap/Kconfig
@@ -29,7 +29,7 @@ config HOSTAP
 	PLX/PCI/CS version of the driver to actually use the driver.
 
 	The driver can be compiled as a module and it will be called
-	"hostap.ko".
+	hostap.
 
 config HOSTAP_FIRMWARE
 	bool "Support downloading firmware images with Host AP driver"
@@ -68,7 +68,7 @@ config HOSTAP_PLX
 	driver.
 
 	The driver can be compiled as a module and will be named
-	"hostap_plx.ko".
+	hostap_plx.
 
 config HOSTAP_PCI
 	tristate "Host AP driver for Prism2.5 PCI adaptors"
@@ -81,7 +81,7 @@ config HOSTAP_PCI
 	driver.
 
 	The driver can be compiled as a module and will be named
-	"hostap_pci.ko".
+	hostap_pci.
 
 config HOSTAP_CS
 	tristate "Host AP driver for Prism2/2.5/3 PC Cards"
@@ -94,4 +94,4 @@ config HOSTAP_CS
 	driver.
 
 	The driver can be compiled as a module and will be named
-	"hostap_cs.ko".
+	hostap_cs.
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 8304f6406a1..736162324ba 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -75,7 +75,7 @@ config IWLAGN
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwlagn.ko.
+	  module will be called iwlagn.
 
 
 config IWL4965
@@ -113,7 +113,7 @@ config IWL3945
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwl3945.ko.
+	  module will be called iwl3945.
 
 config IWL3945_SPECTRUM_MEASUREMENT
 	bool "Enable Spectrum Measurement in iwl3945 driver"
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index bebf735cd4b..ff0042ffe3e 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -584,7 +584,7 @@ static int rndis_set_config_parameter(struct usbnet *dev, char *param,
 	ret = rndis_set_oid(dev, OID_GEN_RNDIS_CONFIG_PARAMETER,
 							infobuf, info_len);
 	if (ret != 0)
-		devdbg(dev, "setting rndis config paramater failed, %d.", ret);
+		devdbg(dev, "setting rndis config parameter failed, %d.", ret);
 
 	kfree(infobuf);
 	return ret;
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index bfc5d9cf716..1ae11c7f17a 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -9,11 +9,11 @@ menuconfig RT2X00
 
 	  When building one of the individual drivers, the rt2x00 library
 	  will also be created. That library (when the driver is built as
-	  a module) will be called "rt2x00lib.ko".
+	  a module) will be called rt2x00lib.
 
 	  Additionally PCI and USB libraries will also be build depending
 	  on the types of drivers being selected, these libraries will be
-	  called "rt2x00pci.ko" and "rt2x00usb.ko".
+	  called rt2x00pci and rt2x00usb.
 
 if RT2X00
 
@@ -26,7 +26,7 @@ config RT2400PCI
 	  This adds support for rt2400 wireless chipset family.
 	  Supported chips: RT2460.
 
-	  When compiled as a module, this driver will be called "rt2400pci.ko".
+	  When compiled as a module, this driver will be called rt2400pci.
 
 config RT2500PCI
 	tristate "Ralink rt2500 (PCI/PCMCIA) support"
@@ -37,7 +37,7 @@ config RT2500PCI
 	  This adds support for rt2500 wireless chipset family.
 	  Supported chips: RT2560.
 
-	  When compiled as a module, this driver will be called "rt2500pci.ko".
+	  When compiled as a module, this driver will be called rt2500pci.
 
 config RT61PCI
 	tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
@@ -51,7 +51,7 @@ config RT61PCI
 	  This adds support for rt2501 wireless chipset family.
 	  Supported chips: RT2561, RT2561S & RT2661.
 
-	  When compiled as a module, this driver will be called "rt61pci.ko".
+	  When compiled as a module, this driver will be called rt61pci.
 
 config RT2500USB
 	tristate "Ralink rt2500 (USB) support"
@@ -62,7 +62,7 @@ config RT2500USB
 	  This adds support for rt2500 wireless chipset family.
 	  Supported chips: RT2571 & RT2572.
 
-	  When compiled as a module, this driver will be called "rt2500usb.ko".
+	  When compiled as a module, this driver will be called rt2500usb.
 
 config RT73USB
 	tristate "Ralink rt2501/rt73 (USB) support"
@@ -75,7 +75,7 @@ config RT73USB
 	  This adds support for rt2501 wireless chipset family.
 	  Supported chips: RT2571W, RT2573 & RT2671.
 
-	  When compiled as a module, this driver will be called "rt73usb.ko".
+	  When compiled as a module, this driver will be called rt73usb.
 
 config RT2X00_LIB_PCI
 	tristate
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index a631613177d..d83e3794d34 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -235,7 +235,7 @@ void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna);
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  *
  * Initialize work structure and all link tuning related
- * paramters. This will not start the link tuning process itself.
+ * parameters. This will not start the link tuning process itself.
  */
 void rt2x00link_register(struct rt2x00_dev *rt2x00dev);
 
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index e55b33961ae..fa2821be44c 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -138,7 +138,7 @@ psa_read(struct net_device *	dev,
 
 /*------------------------------------------------------------------*/
 /*
- * Write the Paramter Storage Area to the WaveLAN card's memory
+ * Write the Parameter Storage Area to the WaveLAN card's memory
  */
 static void
 psa_write(struct net_device *	dev,
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index 3eee70928d4..2d6da78fddb 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -679,7 +679,7 @@ alloc_err:
 	return rc;
 }
 
-static int sn_pci_hotplug_init(void)
+static int __init sn_pci_hotplug_init(void)
 {
 	struct pci_bus *pci_bus = NULL;
 	int rc;
@@ -716,7 +716,7 @@ static int sn_pci_hotplug_init(void)
 	return registered == 1 ? 0 : -ENODEV;
 }
 
-static void sn_pci_hotplug_exit(void)
+static void __exit sn_pci_hotplug_exit(void)
 {
 	struct hotplug_slot *bss_hotplug_slot;
 
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 27647354398..fbf965b31c1 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -217,7 +217,7 @@ config PCMCIA_PXA2XX
 	depends on ARM && ARCH_PXA && PCMCIA
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
-		    || ARCH_VIPER || ARCH_PXA_ESERIES)
+		    || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
 
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index bbac4632722..047394d98ac 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -73,5 +73,6 @@ pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
 pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
 pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o
 pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
+pxa2xx-obj-$(CONFIG_MACH_STARGATE2)		+= pxa2xx_stargate2.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_core.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c
new file mode 100644
index 00000000000..490749ea677
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_stargate2.c
@@ -0,0 +1,174 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_stargate2.c
+ *
+ * Stargate 2 PCMCIA specific routines.
+ *
+ * Created:	December 6, 2005
+ * Author:	Ed C. Epp
+ * Copyright:	Intel Corp 2005
+ *              Jonathan Cameron <jic23@cam.ac.uk> 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <pcmcia/ss.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+
+#define SG2_S0_BUFF_CTL		120
+#define SG2_S0_POWER_CTL	108
+#define SG2_S0_GPIO_RESET	82
+#define SG2_S0_GPIO_DETECT	53
+#define SG2_S0_GPIO_READY	81
+
+static struct pcmcia_irqs irqs[] = {
+	{ 0, IRQ_GPIO(SG2_S0_GPIO_DETECT), "PCMCIA0 CD" },
+};
+
+static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	skt->irq = IRQ_GPIO(SG2_S0_GPIO_READY);
+	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+				    struct pcmcia_state *state)
+{
+	state->detect = !gpio_get_value(SG2_S0_GPIO_DETECT);
+	state->ready  = !!gpio_get_value(SG2_S0_GPIO_READY);
+	state->bvd1   = 0; /* not available - battery detect on card */
+	state->bvd2   = 0; /* not available */
+	state->vs_3v  = 1; /* not available - voltage detect for card */
+	state->vs_Xv  = 0; /* not available */
+	state->wrprot = 0; /* not available - write protect */
+}
+
+static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				       const socket_state_t *state)
+{
+	/* Enable card power */
+	switch (state->Vcc) {
+	case 0:
+		/* sets power ctl register high */
+		gpio_set_value(SG2_S0_POWER_CTL, 1);
+		break;
+	case 33:
+	case 50:
+		/* sets power control register low (clear) */
+		gpio_set_value(SG2_S0_POWER_CTL, 0);
+		msleep(100);
+		break;
+	default:
+		pr_err("%s(): bad Vcc %u\n",
+		       __func__, state->Vcc);
+		return -1;
+	}
+
+	/* reset */
+	gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET));
+
+	return 0;
+}
+
+static void sg2_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static struct pcmcia_low_level sg2_pcmcia_ops __initdata = {
+	.owner			= THIS_MODULE,
+	.hw_init		= sg2_pcmcia_hw_init,
+	.hw_shutdown		= sg2_pcmcia_hw_shutdown,
+	.socket_state		= sg2_pcmcia_socket_state,
+	.configure_socket	= sg2_pcmcia_configure_socket,
+	.socket_init		= sg2_pcmcia_socket_init,
+	.socket_suspend		= sg2_pcmcia_socket_suspend,
+	.nr			= 1,
+};
+
+static struct platform_device *sg2_pcmcia_device;
+
+static int __init sg2_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_stargate2())
+		return -ENODEV;
+
+	sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!sg2_pcmcia_device)
+		return -ENOMEM;
+
+	ret = gpio_request(SG2_S0_BUFF_CTL, "SG2 CF buff ctl");
+	if (ret)
+		goto error_put_platform_device;
+	ret = gpio_request(SG2_S0_POWER_CTL, "SG2 CF power ctl");
+	if (ret)
+		goto error_free_gpio_buff_ctl;
+	ret = gpio_request(SG2_S0_GPIO_RESET, "SG2 CF reset");
+	if (ret)
+		goto error_free_gpio_power_ctl;
+	/* Set gpio directions */
+	gpio_direction_output(SG2_S0_BUFF_CTL, 0);
+	gpio_direction_output(SG2_S0_POWER_CTL, 1);
+	gpio_direction_output(SG2_S0_GPIO_RESET, 1);
+
+	ret = platform_device_add_data(sg2_pcmcia_device,
+				       &sg2_pcmcia_ops,
+				       sizeof(sg2_pcmcia_ops));
+	if (ret)
+		goto error_free_gpio_reset;
+
+	ret = platform_device_add(sg2_pcmcia_device);
+	if (ret)
+		goto error_free_gpio_reset;
+
+	return 0;
+error_free_gpio_reset:
+	gpio_free(SG2_S0_GPIO_RESET);
+error_free_gpio_power_ctl:
+	gpio_free(SG2_S0_POWER_CTL);
+error_free_gpio_buff_ctl:
+	gpio_free(SG2_S0_BUFF_CTL);
+error_put_platform_device:
+	platform_device_put(sg2_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit sg2_pcmcia_exit(void)
+{
+	platform_device_unregister(sg2_pcmcia_device);
+	gpio_free(SG2_S0_BUFF_CTL);
+	gpio_free(SG2_S0_POWER_CTL);
+	gpio_free(SG2_S0_GPIO_RESET);
+}
+
+fs_initcall(sg2_pcmcia_init);
+module_exit(sg2_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index f7a3283dd02..551332e4ed0 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -12,32 +12,56 @@
 #include <linux/module.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/io.h>
+
+#define EP93XX_RTC_DATA			0x000
+#define EP93XX_RTC_MATCH		0x004
+#define EP93XX_RTC_STATUS		0x008
+#define  EP93XX_RTC_STATUS_INTR		 (1<<0)
+#define EP93XX_RTC_LOAD			0x00C
+#define EP93XX_RTC_CONTROL		0x010
+#define  EP93XX_RTC_CONTROL_MIE		 (1<<0)
+#define EP93XX_RTC_SWCOMP		0x108
+#define  EP93XX_RTC_SWCOMP_DEL_MASK	 0x001f0000
+#define  EP93XX_RTC_SWCOMP_DEL_SHIFT	 16
+#define  EP93XX_RTC_SWCOMP_INT_MASK	 0x0000ffff
+#define  EP93XX_RTC_SWCOMP_INT_SHIFT	 0
+
+#define DRV_VERSION "0.3"
 
-#define EP93XX_RTC_REG(x)	(EP93XX_RTC_BASE + (x))
-#define EP93XX_RTC_DATA		EP93XX_RTC_REG(0x0000)
-#define EP93XX_RTC_LOAD		EP93XX_RTC_REG(0x000C)
-#define EP93XX_RTC_SWCOMP	EP93XX_RTC_REG(0x0108)
-
-#define DRV_VERSION "0.2"
+/*
+ * struct device dev.platform_data is used to store our private data
+ * because struct rtc_device does not have a variable to hold it.
+ */
+struct ep93xx_rtc {
+	void __iomem	*mmio_base;
+};
 
-static int ep93xx_get_swcomp(struct device *dev, unsigned short *preload,
+static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload,
 				unsigned short *delete)
 {
-	unsigned short comp = __raw_readl(EP93XX_RTC_SWCOMP);
+	struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+	unsigned long comp;
+
+	comp = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_SWCOMP);
 
 	if (preload)
-		*preload = comp & 0xffff;
+		*preload = (comp & EP93XX_RTC_SWCOMP_INT_MASK)
+				>> EP93XX_RTC_SWCOMP_INT_SHIFT;
 
 	if (delete)
-		*delete = (comp >> 16) & 0x1f;
+		*delete = (comp & EP93XX_RTC_SWCOMP_DEL_MASK)
+				>> EP93XX_RTC_SWCOMP_DEL_SHIFT;
 
 	return 0;
 }
 
 static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	unsigned long time = __raw_readl(EP93XX_RTC_DATA);
+	struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+	unsigned long time;
+
+	 time = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_DATA);
 
 	rtc_time_to_tm(time, tm);
 	return 0;
@@ -45,7 +69,9 @@ static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 static int ep93xx_rtc_set_mmss(struct device *dev, unsigned long secs)
 {
-	__raw_writel(secs + 1, EP93XX_RTC_LOAD);
+	struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+
+	__raw_writel(secs + 1, ep93xx_rtc->mmio_base + EP93XX_RTC_LOAD);
 	return 0;
 }
 
@@ -53,7 +79,7 @@ static int ep93xx_rtc_proc(struct device *dev, struct seq_file *seq)
 {
 	unsigned short preload, delete;
 
-	ep93xx_get_swcomp(dev, &preload, &delete);
+	ep93xx_rtc_get_swcomp(dev, &preload, &delete);
 
 	seq_printf(seq, "preload\t\t: %d\n", preload);
 	seq_printf(seq, "delete\t\t: %d\n", delete);
@@ -67,54 +93,104 @@ static const struct rtc_class_ops ep93xx_rtc_ops = {
 	.proc		= ep93xx_rtc_proc,
 };
 
-static ssize_t ep93xx_sysfs_show_comp_preload(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_preload(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
 	unsigned short preload;
 
-	ep93xx_get_swcomp(dev, &preload, NULL);
+	ep93xx_rtc_get_swcomp(dev, &preload, NULL);
 
 	return sprintf(buf, "%d\n", preload);
 }
-static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_sysfs_show_comp_preload, NULL);
+static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_rtc_show_comp_preload, NULL);
 
-static ssize_t ep93xx_sysfs_show_comp_delete(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_delete(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
 	unsigned short delete;
 
-	ep93xx_get_swcomp(dev, NULL, &delete);
+	ep93xx_rtc_get_swcomp(dev, NULL, &delete);
 
 	return sprintf(buf, "%d\n", delete);
 }
-static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_sysfs_show_comp_delete, NULL);
+static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_rtc_show_comp_delete, NULL);
 
 
-static int __devinit ep93xx_rtc_probe(struct platform_device *dev)
+static int __init ep93xx_rtc_probe(struct platform_device *pdev)
 {
-	struct rtc_device *rtc = rtc_device_register("ep93xx",
-				&dev->dev, &ep93xx_rtc_ops, THIS_MODULE);
+	struct ep93xx_rtc *ep93xx_rtc;
+	struct resource *res;
+	struct rtc_device *rtc;
+	int err;
+
+	ep93xx_rtc = kzalloc(sizeof(struct ep93xx_rtc), GFP_KERNEL);
+	if (ep93xx_rtc == NULL)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL)
+		return -ENXIO;
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (res == NULL)
+		return -EBUSY;
+
+	ep93xx_rtc->mmio_base = ioremap(res->start, resource_size(res));
+	if (ep93xx_rtc->mmio_base == NULL) {
+		err = -ENXIO;
+		goto fail;
+	}
 
+	pdev->dev.platform_data = ep93xx_rtc;
+
+	rtc = rtc_device_register(pdev->name,
+				&pdev->dev, &ep93xx_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc)) {
-		return PTR_ERR(rtc);
+		err = PTR_ERR(rtc);
+		goto fail;
 	}
 
-	platform_set_drvdata(dev, rtc);
+	platform_set_drvdata(pdev, rtc);
 
-	device_create_file(&dev->dev, &dev_attr_comp_preload);
-	device_create_file(&dev->dev, &dev_attr_comp_delete);
+	err = device_create_file(&pdev->dev, &dev_attr_comp_preload);
+	if (err)
+		goto fail;
+	err = device_create_file(&pdev->dev, &dev_attr_comp_delete);
+	if (err) {
+		device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+		goto fail;
+	}
 
 	return 0;
+
+fail:
+	if (ep93xx_rtc->mmio_base) {
+		iounmap(ep93xx_rtc->mmio_base);
+		pdev->dev.platform_data = NULL;
+	}
+	release_mem_region(res->start, resource_size(res));
+	return err;
 }
 
-static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
+static int __exit ep93xx_rtc_remove(struct platform_device *pdev)
 {
-	struct rtc_device *rtc = platform_get_drvdata(dev);
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
+	struct ep93xx_rtc *ep93xx_rtc = pdev->dev.platform_data;
+	struct resource *res;
+
+	/* cleanup sysfs */
+	device_remove_file(&pdev->dev, &dev_attr_comp_delete);
+	device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+
+	rtc_device_unregister(rtc);
+
+	iounmap(ep93xx_rtc->mmio_base);
+	pdev->dev.platform_data = NULL;
 
- 	if (rtc)
-		rtc_device_unregister(rtc);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
 
-	platform_set_drvdata(dev, NULL);
+	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
@@ -122,23 +198,22 @@ static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:ep93xx-rtc");
 
-static struct platform_driver ep93xx_rtc_platform_driver = {
+static struct platform_driver ep93xx_rtc_driver = {
 	.driver		= {
 		.name	= "ep93xx-rtc",
 		.owner	= THIS_MODULE,
 	},
-	.probe		= ep93xx_rtc_probe,
-	.remove		= __devexit_p(ep93xx_rtc_remove),
+	.remove		= __exit_p(ep93xx_rtc_remove),
 };
 
 static int __init ep93xx_rtc_init(void)
 {
-	return platform_driver_register(&ep93xx_rtc_platform_driver);
+        return platform_driver_probe(&ep93xx_rtc_driver, ep93xx_rtc_probe);
 }
 
 static void __exit ep93xx_rtc_exit(void)
 {
-	platform_driver_unregister(&ep93xx_rtc_platform_driver);
+	platform_driver_unregister(&ep93xx_rtc_driver);
 }
 
 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index aaf1f75fa29..457231bb102 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -117,7 +117,7 @@ static int pl030_probe(struct amba_device *dev, struct amba_id *id)
 		goto err_rtc;
 	}
 
-	rtc->base = ioremap(dev->res.start, SZ_4K);
+	rtc->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!rtc->base) {
 		ret = -ENOMEM;
 		goto err_map;
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 451fc13784d..f41873f98f6 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -142,8 +142,7 @@ static int pl031_probe(struct amba_device *adev, struct amba_id *id)
 		goto out;
 	}
 
-	ldata->base = ioremap(adev->res.start,
-			      adev->res.end - adev->res.start + 1);
+	ldata->base = ioremap(adev->res.start, resource_size(&adev->res));
 	if (!ldata->base) {
 		ret = -ENOMEM;
 		goto out_no_remap;
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index a7745c82b4a..cb909a5b504 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -8,7 +8,7 @@ config LCS
 	   Select this option if you want to use LCS networking on IBM System z.
 	   This device driver supports Token Ring (IEEE 802.5),
 	   FDDI (IEEE 802.7) and Ethernet.
-	   To compile as a module, choose M. The module name is lcs.ko.
+	   To compile as a module, choose M. The module name is lcs.
 	   If you do not know what it is, it's safe to choose Y.
 
 config CTCM
@@ -21,7 +21,7 @@ config CTCM
 	  It also supports virtual CTCs when running under VM.
 	  This driver also supports channel-to-channel MPC SNA devices.
 	  MPC is an SNA protocol device used by Communication Server for Linux.
-	  To compile as a module, choose M. The module name is ctcm.ko.
+	  To compile as a module, choose M. The module name is ctcm.
 	  To compile into the kernel, choose Y.
 	  If you do not need any channel-to-channel connection, choose N.
 
@@ -34,7 +34,7 @@ config NETIUCV
 	  link between VM guests. Using ifconfig a point-to-point connection
 	  can be established to the Linux on IBM System z
 	  running on the other VM guest. To compile as a module, choose M.
-	  The module name is netiucv.ko. If unsure, choose Y.
+	  The module name is netiucv. If unsure, choose Y.
 
 config SMSGIUCV
 	tristate "IUCV special message support (VM only)"
@@ -50,7 +50,7 @@ config CLAW
 	  This driver supports channel attached CLAW devices.
 	  CLAW is Common Link Access for Workstation.  Common devices
           that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices.
-	  To compile as a module, choose M. The module name is claw.ko.
+	  To compile as a module, choose M. The module name is claw.
 	  To compile into the kernel, choose Y.
 
 config QETH
@@ -65,14 +65,14 @@ config QETH
 	  <http://www.ibm.com/developerworks/linux/linux390>
 
 	  To compile this driver as a module, choose M.
-	  The module name is qeth.ko.
+	  The module name is qeth.
 
 config QETH_L2
         tristate "qeth layer 2 device support"
         depends on QETH
         help
           Select this option to be able to run qeth devices in layer 2 mode.
-          To compile as a module, choose M. The module name is qeth_l2.ko.
+          To compile as a module, choose M. The module name is qeth_l2.
           If unsure, choose y.
 
 config QETH_L3
@@ -80,7 +80,7 @@ config QETH_L3
         depends on QETH
         help
           Select this option to be able to run qeth devices in layer 3 mode.
-          To compile as a module choose M. The module name is qeth_l3.ko.
+          To compile as a module choose M. The module name is qeth_l3.
           If unsure, choose Y.
 
 config QETH_IPV6
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index bb2752b4130..35493a82d2a 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -116,7 +116,7 @@ static void zfcp_wka_port_put(struct zfcp_wka_port *wka_port)
 {
 	if (atomic_dec_return(&wka_port->refcount) != 0)
 		return;
-	/* wait 10 miliseconds, other reqs might pop in */
+	/* wait 10 milliseconds, other reqs might pop in */
 	schedule_delayed_work(&wka_port->work, HZ / 100);
 }
 
diff --git a/drivers/scsi/dpt/osd_util.h b/drivers/scsi/dpt/osd_util.h
index 4b56c0436ba..b2613c2eaac 100644
--- a/drivers/scsi/dpt/osd_util.h
+++ b/drivers/scsi/dpt/osd_util.h
@@ -342,7 +342,7 @@ uLONG osdGetThreadID(void);
 /* wakes up the specifed thread */
 void osdWakeThread(uLONG);
 
-/* osd sleep for x miliseconds */
+/* osd sleep for x milliseconds */
 void osdSleep(uLONG);
 
 #define DPT_THREAD_PRIORITY_LOWEST 0x00
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index e9fa6762044..7991ba1980a 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1174,8 +1174,8 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc)
  * @reftag:         out: ref tag (reference tag)
  *
  * Description:
- *   Extract DIF paramters from the command if possible.  Otherwise,
- *   use default paratmers.
+ *   Extract DIF parameters from the command if possible.  Otherwise,
+ *   use default parameters.
  *
  **/
 static inline void
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 795201fa0b4..512c2cc1a33 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -469,7 +469,7 @@ typedef struct {
 	u8	type;		/* Type of the device */
 	u8	cur_status;	/* current status of the device */
 	u8	tag_depth;	/* Level of tagging */
-	u8	sync_neg;	/* sync negotiation - ENABLE or DISBALE */
+	u8	sync_neg;	/* sync negotiation - ENABLE or DISABLE */
 	u32	size;		/* configurable size in terms of 512 byte
 				   blocks */
 }__attribute__ ((packed)) phys_drv;
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
index 170399ef06f..b25b74764ec 100644
--- a/drivers/scsi/megaraid/mbox_defs.h
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -686,7 +686,7 @@ typedef struct {
  * @type	: Type of the device
  * @cur_status	: current status of the device
  * @tag_depth	: Level of tagging
- * @sync_neg	: sync negotiation - ENABLE or DISBALE
+ * @sync_neg	: sync negotiation - ENABLE or DISABLE
  * @size	: configurable size in terms of 512 byte
  */
 typedef struct {
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 641e800ed69..1132c5cae7a 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -861,7 +861,7 @@ config SERIAL_UARTLITE
 	  Say Y here if you want to use the Xilinx uartlite serial controller.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called uartlite.ko.
+	  module will be called uartlite.
 
 config SERIAL_UARTLITE_CONSOLE
 	bool "Support for console on Xilinx uartlite serial port"
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index cdc049d4350..58a4879c7e4 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -686,7 +686,7 @@ static int pl010_probe(struct amba_device *dev, struct amba_id *id)
 		goto out;
 	}
 
-	base = ioremap(dev->res.start, PAGE_SIZE);
+	base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!base) {
 		ret = -ENOMEM;
 		goto free;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 88fdac51b6c..bf82e28770a 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -70,6 +70,23 @@ struct uart_amba_port {
 	struct clk		*clk;
 	unsigned int		im;	/* interrupt mask */
 	unsigned int		old_status;
+	unsigned int		ifls;	/* vendor-specific */
+};
+
+/* There is by now at least one vendor with differing details, so handle it */
+struct vendor_data {
+	unsigned int		ifls;
+	unsigned int		fifosize;
+};
+
+static struct vendor_data vendor_arm = {
+	.ifls			= UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+	.fifosize		= 16,
+};
+
+static struct vendor_data vendor_st = {
+	.ifls			= UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+	.fifosize		= 64,
 };
 
 static void pl011_stop_tx(struct uart_port *port)
@@ -360,8 +377,7 @@ static int pl011_startup(struct uart_port *port)
 	if (retval)
 		goto clk_dis;
 
-	writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
-	       uap->port.membase + UART011_IFLS);
+	writew(uap->ifls, uap->port.membase + UART011_IFLS);
 
 	/*
 	 * Provoke TX FIFO interrupt into asserting.
@@ -732,6 +748,7 @@ static struct uart_driver amba_reg = {
 static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct uart_amba_port *uap;
+	struct vendor_data *vendor = id->data;
 	void __iomem *base;
 	int i, ret;
 
@@ -750,7 +767,7 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 		goto out;
 	}
 
-	base = ioremap(dev->res.start, PAGE_SIZE);
+	base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!base) {
 		ret = -ENOMEM;
 		goto free;
@@ -762,12 +779,13 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 		goto unmap;
 	}
 
+	uap->ifls = vendor->ifls;
 	uap->port.dev = &dev->dev;
 	uap->port.mapbase = dev->res.start;
 	uap->port.membase = base;
 	uap->port.iotype = UPIO_MEM;
 	uap->port.irq = dev->irq[0];
-	uap->port.fifosize = 16;
+	uap->port.fifosize = vendor->fifosize;
 	uap->port.ops = &amba_pl011_pops;
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = i;
@@ -812,6 +830,12 @@ static struct amba_id pl011_ids[] __initdata = {
 	{
 		.id	= 0x00041011,
 		.mask	= 0x000fffff,
+		.data	= &vendor_arm,
+	},
+	{
+		.id	= 0x00380802,
+		.mask	= 0x00ffffff,
+		.data	= &vendor_st,
 	},
 	{ 0, 0 },
 };
@@ -845,7 +869,11 @@ static void __exit pl011_exit(void)
 	uart_unregister_driver(&amba_reg);
 }
 
-module_init(pl011_init);
+/*
+ * While this can be a module, if builtin it's most likely the console
+ * So let's leave module_exit but move module_init to an earlier place
+ */
+arch_initcall(pl011_init);
 module_exit(pl011_exit);
 
 MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 7b5d1de9cfe..285b414f305 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -71,7 +71,7 @@
 #define ONEMS 0xb0 /* One Millisecond register */
 #define UTS   0xb4 /* UART Test Register */
 #endif
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -101,7 +101,7 @@
 #define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)	 /* Send break */
 #define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
 #endif
 #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -132,7 +132,7 @@
 #define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
 #define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz, only on mx1 */
 #define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
 #endif
@@ -186,13 +186,6 @@
 #define  UTS_SOFTRST	 (1<<0)	 /* Software reset */
 
 /* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_IMX
-#define SERIAL_IMX_MAJOR	204
-#define MINOR_START		41
-#define DEV_NAME		"ttySMX"
-#define MAX_INTERNAL_IRQ	IMX_IRQS
-#endif
-
 #ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START	        16
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 95749477541..e8aae227b5e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -118,7 +118,7 @@ config SPI_GPIO
 
 config SPI_IMX
 	tristate "Freescale iMX SPI controller"
-	depends on ARCH_IMX && EXPERIMENTAL
+	depends on ARCH_MX1 && EXPERIMENTAL
 	help
 	  This enables using the Freescale iMX SPI controller in master
 	  mode.
@@ -171,6 +171,15 @@ config SPI_ORION
 	help
 	  This enables using the SPI master controller on the Orion chips.
 
+config SPI_PL022
+	tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)"
+	depends on ARM_AMBA && EXPERIMENTAL
+	default y if MACH_U300
+	help
+	  This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
+	  controller. If you have an embedded system with an AMBA(R)
+	  bus and a PL022 controller, say Y or M here.
+
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
 	depends on ARCH_PXA && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 5d0451936d8..ecfadb18048 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
 obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
 obj-$(CONFIG_SPI_ORION)			+= orion_spi.o
+obj-$(CONFIG_SPI_PL022)			+= amba-pl022.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)		+= mpc52xx_psc_spi.o
 obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
new file mode 100644
index 00000000000..da76797ce8b
--- /dev/null
+++ b/drivers/spi/amba-pl022.c
@@ -0,0 +1,1866 @@
+/*
+ * drivers/spi/amba-pl022.c
+ *
+ * A driver for the ARM PL022 PrimeCell SSP/SPI bus master.
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ *	linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ *      Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * TODO:
+ * - add timeout on polled transfers
+ * - add generic DMA framework support
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+/*
+ * This macro is used to define some register default values.
+ * reg is masked with mask, the OR:ed with an (again masked)
+ * val shifted sb steps to the left.
+ */
+#define SSP_WRITE_BITS(reg, val, mask, sb) \
+ ((reg) = (((reg) & ~(mask)) | (((val)<<(sb)) & (mask))))
+
+/*
+ * This macro is also used to define some default values.
+ * It will just shift val by sb steps to the left and mask
+ * the result with mask.
+ */
+#define GEN_MASK_BITS(val, mask, sb) \
+ (((val)<<(sb)) & (mask))
+
+#define DRIVE_TX		0
+#define DO_NOT_DRIVE_TX		1
+
+#define DO_NOT_QUEUE_DMA	0
+#define QUEUE_DMA		1
+
+#define RX_TRANSFER		1
+#define TX_TRANSFER		2
+
+/*
+ * Macros to access SSP Registers with their offsets
+ */
+#define SSP_CR0(r)	(r + 0x000)
+#define SSP_CR1(r)	(r + 0x004)
+#define SSP_DR(r)	(r + 0x008)
+#define SSP_SR(r)	(r + 0x00C)
+#define SSP_CPSR(r)	(r + 0x010)
+#define SSP_IMSC(r)	(r + 0x014)
+#define SSP_RIS(r)	(r + 0x018)
+#define SSP_MIS(r)	(r + 0x01C)
+#define SSP_ICR(r)	(r + 0x020)
+#define SSP_DMACR(r)	(r + 0x024)
+#define SSP_ITCR(r)	(r + 0x080)
+#define SSP_ITIP(r)	(r + 0x084)
+#define SSP_ITOP(r)	(r + 0x088)
+#define SSP_TDR(r)	(r + 0x08C)
+
+#define SSP_PID0(r)	(r + 0xFE0)
+#define SSP_PID1(r)	(r + 0xFE4)
+#define SSP_PID2(r)	(r + 0xFE8)
+#define SSP_PID3(r)	(r + 0xFEC)
+
+#define SSP_CID0(r)	(r + 0xFF0)
+#define SSP_CID1(r)	(r + 0xFF4)
+#define SSP_CID2(r)	(r + 0xFF8)
+#define SSP_CID3(r)	(r + 0xFFC)
+
+/*
+ * SSP Control Register 0  - SSP_CR0
+ */
+#define SSP_CR0_MASK_DSS	(0x1FUL << 0)
+#define SSP_CR0_MASK_HALFDUP	(0x1UL << 5)
+#define SSP_CR0_MASK_SPO	(0x1UL << 6)
+#define SSP_CR0_MASK_SPH	(0x1UL << 7)
+#define SSP_CR0_MASK_SCR	(0xFFUL << 8)
+#define SSP_CR0_MASK_CSS	(0x1FUL << 16)
+#define SSP_CR0_MASK_FRF	(0x3UL << 21)
+
+/*
+ * SSP Control Register 0  - SSP_CR1
+ */
+#define SSP_CR1_MASK_LBM	(0x1UL << 0)
+#define SSP_CR1_MASK_SSE	(0x1UL << 1)
+#define SSP_CR1_MASK_MS		(0x1UL << 2)
+#define SSP_CR1_MASK_SOD	(0x1UL << 3)
+#define SSP_CR1_MASK_RENDN	(0x1UL << 4)
+#define SSP_CR1_MASK_TENDN	(0x1UL << 5)
+#define SSP_CR1_MASK_MWAIT	(0x1UL << 6)
+#define SSP_CR1_MASK_RXIFLSEL	(0x7UL << 7)
+#define SSP_CR1_MASK_TXIFLSEL	(0x7UL << 10)
+
+/*
+ * SSP Data Register - SSP_DR
+ */
+#define SSP_DR_MASK_DATA	0xFFFFFFFF
+
+/*
+ * SSP Status Register - SSP_SR
+ */
+#define SSP_SR_MASK_TFE		(0x1UL << 0) /* Transmit FIFO empty */
+#define SSP_SR_MASK_TNF		(0x1UL << 1) /* Transmit FIFO not full */
+#define SSP_SR_MASK_RNE		(0x1UL << 2) /* Receive FIFO not empty */
+#define SSP_SR_MASK_RFF 	(0x1UL << 3) /* Receive FIFO full */
+#define SSP_SR_MASK_BSY		(0x1UL << 4) /* Busy Flag */
+
+/*
+ * SSP Clock Prescale Register  - SSP_CPSR
+ */
+#define SSP_CPSR_MASK_CPSDVSR	(0xFFUL << 0)
+
+/*
+ * SSP Interrupt Mask Set/Clear Register - SSP_IMSC
+ */
+#define SSP_IMSC_MASK_RORIM (0x1UL << 0) /* Receive Overrun Interrupt mask */
+#define SSP_IMSC_MASK_RTIM  (0x1UL << 1) /* Receive timeout Interrupt mask */
+#define SSP_IMSC_MASK_RXIM  (0x1UL << 2) /* Receive FIFO Interrupt mask */
+#define SSP_IMSC_MASK_TXIM  (0x1UL << 3) /* Transmit FIFO Interrupt mask */
+
+/*
+ * SSP Raw Interrupt Status Register - SSP_RIS
+ */
+/* Receive Overrun Raw Interrupt status */
+#define SSP_RIS_MASK_RORRIS		(0x1UL << 0)
+/* Receive Timeout Raw Interrupt status */
+#define SSP_RIS_MASK_RTRIS		(0x1UL << 1)
+/* Receive FIFO Raw Interrupt status */
+#define SSP_RIS_MASK_RXRIS		(0x1UL << 2)
+/* Transmit FIFO Raw Interrupt status */
+#define SSP_RIS_MASK_TXRIS		(0x1UL << 3)
+
+/*
+ * SSP Masked Interrupt Status Register - SSP_MIS
+ */
+/* Receive Overrun Masked Interrupt status */
+#define SSP_MIS_MASK_RORMIS		(0x1UL << 0)
+/* Receive Timeout Masked Interrupt status */
+#define SSP_MIS_MASK_RTMIS		(0x1UL << 1)
+/* Receive FIFO Masked Interrupt status */
+#define SSP_MIS_MASK_RXMIS		(0x1UL << 2)
+/* Transmit FIFO Masked Interrupt status */
+#define SSP_MIS_MASK_TXMIS		(0x1UL << 3)
+
+/*
+ * SSP Interrupt Clear Register - SSP_ICR
+ */
+/* Receive Overrun Raw Clear Interrupt bit */
+#define SSP_ICR_MASK_RORIC		(0x1UL << 0)
+/* Receive Timeout Clear Interrupt bit */
+#define SSP_ICR_MASK_RTIC		(0x1UL << 1)
+
+/*
+ * SSP DMA Control Register - SSP_DMACR
+ */
+/* Receive DMA Enable bit */
+#define SSP_DMACR_MASK_RXDMAE		(0x1UL << 0)
+/* Transmit DMA Enable bit */
+#define SSP_DMACR_MASK_TXDMAE		(0x1UL << 1)
+
+/*
+ * SSP Integration Test control Register - SSP_ITCR
+ */
+#define SSP_ITCR_MASK_ITEN		(0x1UL << 0)
+#define SSP_ITCR_MASK_TESTFIFO		(0x1UL << 1)
+
+/*
+ * SSP Integration Test Input Register - SSP_ITIP
+ */
+#define ITIP_MASK_SSPRXD		 (0x1UL << 0)
+#define ITIP_MASK_SSPFSSIN		 (0x1UL << 1)
+#define ITIP_MASK_SSPCLKIN		 (0x1UL << 2)
+#define ITIP_MASK_RXDMAC		 (0x1UL << 3)
+#define ITIP_MASK_TXDMAC		 (0x1UL << 4)
+#define ITIP_MASK_SSPTXDIN		 (0x1UL << 5)
+
+/*
+ * SSP Integration Test output Register - SSP_ITOP
+ */
+#define ITOP_MASK_SSPTXD		 (0x1UL << 0)
+#define ITOP_MASK_SSPFSSOUT		 (0x1UL << 1)
+#define ITOP_MASK_SSPCLKOUT		 (0x1UL << 2)
+#define ITOP_MASK_SSPOEn		 (0x1UL << 3)
+#define ITOP_MASK_SSPCTLOEn		 (0x1UL << 4)
+#define ITOP_MASK_RORINTR		 (0x1UL << 5)
+#define ITOP_MASK_RTINTR		 (0x1UL << 6)
+#define ITOP_MASK_RXINTR		 (0x1UL << 7)
+#define ITOP_MASK_TXINTR		 (0x1UL << 8)
+#define ITOP_MASK_INTR			 (0x1UL << 9)
+#define ITOP_MASK_RXDMABREQ		 (0x1UL << 10)
+#define ITOP_MASK_RXDMASREQ		 (0x1UL << 11)
+#define ITOP_MASK_TXDMABREQ		 (0x1UL << 12)
+#define ITOP_MASK_TXDMASREQ		 (0x1UL << 13)
+
+/*
+ * SSP Test Data Register - SSP_TDR
+ */
+#define TDR_MASK_TESTDATA 		(0xFFFFFFFF)
+
+/*
+ * Message State
+ * we use the spi_message.state (void *) pointer to
+ * hold a single state value, that's why all this
+ * (void *) casting is done here.
+ */
+#define STATE_START                     ((void *) 0)
+#define STATE_RUNNING                   ((void *) 1)
+#define STATE_DONE                      ((void *) 2)
+#define STATE_ERROR                     ((void *) -1)
+
+/*
+ * Queue State
+ */
+#define QUEUE_RUNNING                   (0)
+#define QUEUE_STOPPED                   (1)
+/*
+ * SSP State - Whether Enabled or Disabled
+ */
+#define SSP_DISABLED 			(0)
+#define SSP_ENABLED 			(1)
+
+/*
+ * SSP DMA State - Whether DMA Enabled or Disabled
+ */
+#define SSP_DMA_DISABLED 		(0)
+#define SSP_DMA_ENABLED 		(1)
+
+/*
+ * SSP Clock Defaults
+ */
+#define NMDK_SSP_DEFAULT_CLKRATE 0x2
+#define NMDK_SSP_DEFAULT_PRESCALE 0x40
+
+/*
+ * SSP Clock Parameter ranges
+ */
+#define CPSDVR_MIN 0x02
+#define CPSDVR_MAX 0xFE
+#define SCR_MIN 0x00
+#define SCR_MAX 0xFF
+
+/*
+ * SSP Interrupt related Macros
+ */
+#define DEFAULT_SSP_REG_IMSC  0x0UL
+#define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC
+#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC)
+
+#define CLEAR_ALL_INTERRUPTS  0x3
+
+
+/*
+ * The type of reading going on on this chip
+ */
+enum ssp_reading {
+	READING_NULL,
+	READING_U8,
+	READING_U16,
+	READING_U32
+};
+
+/**
+ * The type of writing going on on this chip
+ */
+enum ssp_writing {
+	WRITING_NULL,
+	WRITING_U8,
+	WRITING_U16,
+	WRITING_U32
+};
+
+/**
+ * struct vendor_data - vendor-specific config parameters
+ * for PL022 derivates
+ * @fifodepth: depth of FIFOs (both)
+ * @max_bpw: maximum number of bits per word
+ * @unidir: supports unidirection transfers
+ */
+struct vendor_data {
+	int fifodepth;
+	int max_bpw;
+	bool unidir;
+};
+
+/**
+ * struct pl022 - This is the private SSP driver data structure
+ * @adev: AMBA device model hookup
+ * @phybase: The physical memory where the SSP device resides
+ * @virtbase: The virtual memory where the SSP is mapped
+ * @master: SPI framework hookup
+ * @master_info: controller-specific data from machine setup
+ * @regs: SSP controller register's virtual address
+ * @pump_messages: Work struct for scheduling work to the workqueue
+ * @lock: spinlock to syncronise access to driver data
+ * @workqueue: a workqueue on which any spi_message request is queued
+ * @busy: workqueue is busy
+ * @run: workqueue is running
+ * @pump_transfers: Tasklet used in Interrupt Transfer mode
+ * @cur_msg: Pointer to current spi_message being processed
+ * @cur_transfer: Pointer to current spi_transfer
+ * @cur_chip: pointer to current clients chip(assigned from controller_state)
+ * @tx: current position in TX buffer to be read
+ * @tx_end: end position in TX buffer to be read
+ * @rx: current position in RX buffer to be written
+ * @rx_end: end position in RX buffer to be written
+ * @readingtype: the type of read currently going on
+ * @writingtype: the type or write currently going on
+ */
+struct pl022 {
+	struct amba_device		*adev;
+	struct vendor_data		*vendor;
+	resource_size_t			phybase;
+	void __iomem			*virtbase;
+	struct clk			*clk;
+	struct spi_master		*master;
+	struct pl022_ssp_controller	*master_info;
+	/* Driver message queue */
+	struct workqueue_struct		*workqueue;
+	struct work_struct		pump_messages;
+	spinlock_t			queue_lock;
+	struct list_head		queue;
+	int				busy;
+	int				run;
+	/* Message transfer pump */
+	struct tasklet_struct		pump_transfers;
+	struct spi_message		*cur_msg;
+	struct spi_transfer		*cur_transfer;
+	struct chip_data		*cur_chip;
+	void				*tx;
+	void				*tx_end;
+	void				*rx;
+	void				*rx_end;
+	enum ssp_reading		read;
+	enum ssp_writing		write;
+};
+
+/**
+ * struct chip_data - To maintain runtime state of SSP for each client chip
+ * @cr0: Value of control register CR0 of SSP
+ * @cr1: Value of control register CR1 of SSP
+ * @dmacr: Value of DMA control Register of SSP
+ * @cpsr: Value of Clock prescale register
+ * @n_bytes: how many bytes(power of 2) reqd for a given data width of client
+ * @enable_dma: Whether to enable DMA or not
+ * @write: function ptr to be used to write when doing xfer for this chip
+ * @read: function ptr to be used to read when doing xfer for this chip
+ * @cs_control: chip select callback provided by chip
+ * @xfer_type: polling/interrupt/DMA
+ *
+ * Runtime state of the SSP controller, maintained per chip,
+ * This would be set according to the current message that would be served
+ */
+struct chip_data {
+	u16 cr0;
+	u16 cr1;
+	u16 dmacr;
+	u16 cpsr;
+	u8 n_bytes;
+	u8 enable_dma:1;
+	enum ssp_reading read;
+	enum ssp_writing write;
+	void (*cs_control) (u32 command);
+	int xfer_type;
+};
+
+/**
+ * null_cs_control - Dummy chip select function
+ * @command: select/delect the chip
+ *
+ * If no chip select function is provided by client this is used as dummy
+ * chip select
+ */
+static void null_cs_control(u32 command)
+{
+	pr_debug("pl022: dummy chip select control, CS=0x%x\n", command);
+}
+
+/**
+ * giveback - current spi_message is over, schedule next message and call
+ * callback of this message. Assumes that caller already
+ * set message->status; dma and pio irqs are blocked
+ * @pl022: SSP driver private data structure
+ */
+static void giveback(struct pl022 *pl022)
+{
+	struct spi_transfer *last_transfer;
+	unsigned long flags;
+	struct spi_message *msg;
+	void (*curr_cs_control) (u32 command);
+
+	/*
+	 * This local reference to the chip select function
+	 * is needed because we set curr_chip to NULL
+	 * as a step toward termininating the message.
+	 */
+	curr_cs_control = pl022->cur_chip->cs_control;
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+	msg = pl022->cur_msg;
+	pl022->cur_msg = NULL;
+	pl022->cur_transfer = NULL;
+	pl022->cur_chip = NULL;
+	queue_work(pl022->workqueue, &pl022->pump_messages);
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	last_transfer = list_entry(msg->transfers.prev,
+					struct spi_transfer,
+					transfer_list);
+
+	/* Delay if requested before any change in chip select */
+	if (last_transfer->delay_usecs)
+		/*
+		 * FIXME: This runs in interrupt context.
+		 * Is this really smart?
+		 */
+		udelay(last_transfer->delay_usecs);
+
+	/*
+	 * Drop chip select UNLESS cs_change is true or we are returning
+	 * a message with an error, or next message is for another chip
+	 */
+	if (!last_transfer->cs_change)
+		curr_cs_control(SSP_CHIP_DESELECT);
+	else {
+		struct spi_message *next_msg;
+
+		/* Holding of cs was hinted, but we need to make sure
+		 * the next message is for the same chip.  Don't waste
+		 * time with the following tests unless this was hinted.
+		 *
+		 * We cannot postpone this until pump_messages, because
+		 * after calling msg->complete (below) the driver that
+		 * sent the current message could be unloaded, which
+		 * could invalidate the cs_control() callback...
+		 */
+
+		/* get a pointer to the next message, if any */
+		spin_lock_irqsave(&pl022->queue_lock, flags);
+		if (list_empty(&pl022->queue))
+			next_msg = NULL;
+		else
+			next_msg = list_entry(pl022->queue.next,
+					struct spi_message, queue);
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+		/* see if the next and current messages point
+		 * to the same chip
+		 */
+		if (next_msg && next_msg->spi != msg->spi)
+			next_msg = NULL;
+		if (!next_msg || msg->state == STATE_ERROR)
+			curr_cs_control(SSP_CHIP_DESELECT);
+	}
+	msg->state = NULL;
+	if (msg->complete)
+		msg->complete(msg->context);
+	/* This message is completed, so let's turn off the clock! */
+	clk_disable(pl022->clk);
+}
+
+/**
+ * flush - flush the FIFO to reach a clean state
+ * @pl022: SSP driver private data structure
+ */
+static int flush(struct pl022 *pl022)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	dev_dbg(&pl022->adev->dev, "flush\n");
+	do {
+		while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+			readw(SSP_DR(pl022->virtbase));
+	} while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--);
+	return limit;
+}
+
+/**
+ * restore_state - Load configuration of current chip
+ * @pl022: SSP driver private data structure
+ */
+static void restore_state(struct pl022 *pl022)
+{
+	struct chip_data *chip = pl022->cur_chip;
+
+	writew(chip->cr0, SSP_CR0(pl022->virtbase));
+	writew(chip->cr1, SSP_CR1(pl022->virtbase));
+	writew(chip->dmacr, SSP_DMACR(pl022->virtbase));
+	writew(chip->cpsr, SSP_CPSR(pl022->virtbase));
+	writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+	writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+}
+
+/**
+ * load_ssp_default_config - Load default configuration for SSP
+ * @pl022: SSP driver private data structure
+ */
+
+/*
+ * Default SSP Register Values
+ */
+#define DEFAULT_SSP_REG_CR0 ( \
+	GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0)	| \
+	GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \
+	GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \
+	GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \
+	GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \
+	GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16)	| \
+	GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \
+)
+
+#define DEFAULT_SSP_REG_CR1 ( \
+	GEN_MASK_BITS(LOOPBACK_DISABLED, SSP_CR1_MASK_LBM, 0) | \
+	GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \
+	GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \
+	GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) | \
+	GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN, 4) | \
+	GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN, 5) | \
+	GEN_MASK_BITS(SSP_MWIRE_WAIT_ZERO, SSP_CR1_MASK_MWAIT, 6) |\
+	GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL, 7) | \
+	GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL, 10) \
+)
+
+#define DEFAULT_SSP_REG_CPSR ( \
+	GEN_MASK_BITS(NMDK_SSP_DEFAULT_PRESCALE, SSP_CPSR_MASK_CPSDVSR, 0) \
+)
+
+#define DEFAULT_SSP_REG_DMACR (\
+	GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0) | \
+	GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_TXDMAE, 1) \
+)
+
+
+static void load_ssp_default_config(struct pl022 *pl022)
+{
+	writew(DEFAULT_SSP_REG_CR0, SSP_CR0(pl022->virtbase));
+	writew(DEFAULT_SSP_REG_CR1, SSP_CR1(pl022->virtbase));
+	writew(DEFAULT_SSP_REG_DMACR, SSP_DMACR(pl022->virtbase));
+	writew(DEFAULT_SSP_REG_CPSR, SSP_CPSR(pl022->virtbase));
+	writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+	writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+}
+
+/**
+ * This will write to TX and read from RX according to the parameters
+ * set in pl022.
+ */
+static void readwriter(struct pl022 *pl022)
+{
+
+	/*
+	 * The FIFO depth is different inbetween primecell variants.
+	 * I believe filling in too much in the FIFO might cause
+	 * errons in 8bit wide transfers on ARM variants (just 8 words
+	 * FIFO, means only 8x8 = 64 bits in FIFO) at least.
+	 *
+	 * FIXME: currently we have no logic to account for this.
+	 * perhaps there is even something broken in HW regarding
+	 * 8bit transfers (it doesn't fail on 16bit) so this needs
+	 * more investigation...
+	 */
+	dev_dbg(&pl022->adev->dev,
+		"%s, rx: %p, rxend: %p, tx: %p, txend: %p\n",
+		__func__, pl022->rx, pl022->rx_end, pl022->tx, pl022->tx_end);
+
+	/* Read as much as you can */
+	while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+	       && (pl022->rx < pl022->rx_end)) {
+		switch (pl022->read) {
+		case READING_NULL:
+			readw(SSP_DR(pl022->virtbase));
+			break;
+		case READING_U8:
+			*(u8 *) (pl022->rx) =
+				readw(SSP_DR(pl022->virtbase)) & 0xFFU;
+			break;
+		case READING_U16:
+			*(u16 *) (pl022->rx) =
+				(u16) readw(SSP_DR(pl022->virtbase));
+			break;
+		case READING_U32:
+			*(u32 *) (pl022->rx) =
+				readl(SSP_DR(pl022->virtbase));
+			break;
+		}
+		pl022->rx += (pl022->cur_chip->n_bytes);
+	}
+	/*
+	 * Write as much as you can, while keeping an eye on the RX FIFO!
+	 */
+	while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+	       && (pl022->tx < pl022->tx_end)) {
+		switch (pl022->write) {
+		case WRITING_NULL:
+			writew(0x0, SSP_DR(pl022->virtbase));
+			break;
+		case WRITING_U8:
+			writew(*(u8 *) (pl022->tx), SSP_DR(pl022->virtbase));
+			break;
+		case WRITING_U16:
+			writew((*(u16 *) (pl022->tx)), SSP_DR(pl022->virtbase));
+			break;
+		case WRITING_U32:
+			writel(*(u32 *) (pl022->tx), SSP_DR(pl022->virtbase));
+			break;
+		}
+		pl022->tx += (pl022->cur_chip->n_bytes);
+		/*
+		 * This inner reader takes care of things appearing in the RX
+		 * FIFO as we're transmitting. This will happen a lot since the
+		 * clock starts running when you put things into the TX FIFO,
+		 * and then things are continously clocked into the RX FIFO.
+		 */
+		while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+		       && (pl022->rx < pl022->rx_end)) {
+			switch (pl022->read) {
+			case READING_NULL:
+				readw(SSP_DR(pl022->virtbase));
+				break;
+			case READING_U8:
+				*(u8 *) (pl022->rx) =
+					readw(SSP_DR(pl022->virtbase)) & 0xFFU;
+				break;
+			case READING_U16:
+				*(u16 *) (pl022->rx) =
+					(u16) readw(SSP_DR(pl022->virtbase));
+				break;
+			case READING_U32:
+				*(u32 *) (pl022->rx) =
+					readl(SSP_DR(pl022->virtbase));
+				break;
+			}
+			pl022->rx += (pl022->cur_chip->n_bytes);
+		}
+	}
+	/*
+	 * When we exit here the TX FIFO should be full and the RX FIFO
+	 * should be empty
+	 */
+}
+
+
+/**
+ * next_transfer - Move to the Next transfer in the current spi message
+ * @pl022: SSP driver private data structure
+ *
+ * This function moves though the linked list of spi transfers in the
+ * current spi message and returns with the state of current spi
+ * message i.e whether its last transfer is done(STATE_DONE) or
+ * Next transfer is ready(STATE_RUNNING)
+ */
+static void *next_transfer(struct pl022 *pl022)
+{
+	struct spi_message *msg = pl022->cur_msg;
+	struct spi_transfer *trans = pl022->cur_transfer;
+
+	/* Move to next transfer */
+	if (trans->transfer_list.next != &msg->transfers) {
+		pl022->cur_transfer =
+		    list_entry(trans->transfer_list.next,
+			       struct spi_transfer, transfer_list);
+		return STATE_RUNNING;
+	}
+	return STATE_DONE;
+}
+/**
+ * pl022_interrupt_handler - Interrupt handler for SSP controller
+ *
+ * This function handles interrupts generated for an interrupt based transfer.
+ * If a receive overrun (ROR) interrupt is there then we disable SSP, flag the
+ * current message's state as STATE_ERROR and schedule the tasklet
+ * pump_transfers which will do the postprocessing of the current message by
+ * calling giveback(). Otherwise it reads data from RX FIFO till there is no
+ * more data, and writes data in TX FIFO till it is not full. If we complete
+ * the transfer we move to the next transfer and schedule the tasklet.
+ */
+static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
+{
+	struct pl022 *pl022 = dev_id;
+	struct spi_message *msg = pl022->cur_msg;
+	u16 irq_status = 0;
+	u16 flag = 0;
+
+	if (unlikely(!msg)) {
+		dev_err(&pl022->adev->dev,
+			"bad message state in interrupt handler");
+		/* Never fail */
+		return IRQ_HANDLED;
+	}
+
+	/* Read the Interrupt Status Register */
+	irq_status = readw(SSP_MIS(pl022->virtbase));
+
+	if (unlikely(!irq_status))
+		return IRQ_NONE;
+
+	/* This handles the error code interrupts */
+	if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) {
+		/*
+		 * Overrun interrupt - bail out since our Data has been
+		 * corrupted
+		 */
+		dev_err(&pl022->adev->dev,
+			"FIFO overrun\n");
+		if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF)
+			dev_err(&pl022->adev->dev,
+				"RXFIFO is full\n");
+		if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+			dev_err(&pl022->adev->dev,
+				"TXFIFO is full\n");
+
+		/*
+		 * Disable and clear interrupts, disable SSP,
+		 * mark message with bad status so it can be
+		 * retried.
+		 */
+		writew(DISABLE_ALL_INTERRUPTS,
+		       SSP_IMSC(pl022->virtbase));
+		writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+		writew((readw(SSP_CR1(pl022->virtbase)) &
+			(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+		msg->state = STATE_ERROR;
+
+		/* Schedule message queue handler */
+		tasklet_schedule(&pl022->pump_transfers);
+		return IRQ_HANDLED;
+	}
+
+	readwriter(pl022);
+
+	if ((pl022->tx == pl022->tx_end) && (flag == 0)) {
+		flag = 1;
+		/* Disable Transmit interrupt */
+		writew(readw(SSP_IMSC(pl022->virtbase)) &
+		       (~SSP_IMSC_MASK_TXIM),
+		       SSP_IMSC(pl022->virtbase));
+	}
+
+	/*
+	 * Since all transactions must write as much as shall be read,
+	 * we can conclude the entire transaction once RX is complete.
+	 * At this point, all TX will always be finished.
+	 */
+	if (pl022->rx >= pl022->rx_end) {
+		writew(DISABLE_ALL_INTERRUPTS,
+		       SSP_IMSC(pl022->virtbase));
+		writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+		if (unlikely(pl022->rx > pl022->rx_end)) {
+			dev_warn(&pl022->adev->dev, "read %u surplus "
+				 "bytes (did you request an odd "
+				 "number of bytes on a 16bit bus?)\n",
+				 (u32) (pl022->rx - pl022->rx_end));
+		}
+		/* Update total bytes transfered */
+		msg->actual_length += pl022->cur_transfer->len;
+		if (pl022->cur_transfer->cs_change)
+			pl022->cur_chip->
+				cs_control(SSP_CHIP_DESELECT);
+		/* Move to next transfer */
+		msg->state = next_transfer(pl022);
+		tasklet_schedule(&pl022->pump_transfers);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * This sets up the pointers to memory for the next message to
+ * send out on the SPI bus.
+ */
+static int set_up_next_transfer(struct pl022 *pl022,
+				struct spi_transfer *transfer)
+{
+	int residue;
+
+	/* Sanity check the message for this bus width */
+	residue = pl022->cur_transfer->len % pl022->cur_chip->n_bytes;
+	if (unlikely(residue != 0)) {
+		dev_err(&pl022->adev->dev,
+			"message of %u bytes to transmit but the current "
+			"chip bus has a data width of %u bytes!\n",
+			pl022->cur_transfer->len,
+			pl022->cur_chip->n_bytes);
+		dev_err(&pl022->adev->dev, "skipping this message\n");
+		return -EIO;
+	}
+	pl022->tx = (void *)transfer->tx_buf;
+	pl022->tx_end = pl022->tx + pl022->cur_transfer->len;
+	pl022->rx = (void *)transfer->rx_buf;
+	pl022->rx_end = pl022->rx + pl022->cur_transfer->len;
+	pl022->write =
+	    pl022->tx ? pl022->cur_chip->write : WRITING_NULL;
+	pl022->read = pl022->rx ? pl022->cur_chip->read : READING_NULL;
+	return 0;
+}
+
+/**
+ * pump_transfers - Tasklet function which schedules next interrupt transfer
+ * when running in interrupt transfer mode.
+ * @data: SSP driver private data structure
+ *
+ */
+static void pump_transfers(unsigned long data)
+{
+	struct pl022 *pl022 = (struct pl022 *) data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+
+	/* Get current state information */
+	message = pl022->cur_msg;
+	transfer = pl022->cur_transfer;
+
+	/* Handle for abort */
+	if (message->state == STATE_ERROR) {
+		message->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+
+	/* Handle end of message */
+	if (message->state == STATE_DONE) {
+		message->status = 0;
+		giveback(pl022);
+		return;
+	}
+
+	/* Delay if requested at end of transfer before CS change */
+	if (message->state == STATE_RUNNING) {
+		previous = list_entry(transfer->transfer_list.prev,
+					struct spi_transfer,
+					transfer_list);
+		if (previous->delay_usecs)
+			/*
+			 * FIXME: This runs in interrupt context.
+			 * Is this really smart?
+			 */
+			udelay(previous->delay_usecs);
+
+		/* Drop chip select only if cs_change is requested */
+		if (previous->cs_change)
+			pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+	} else {
+		/* STATE_START */
+		message->state = STATE_RUNNING;
+	}
+
+	if (set_up_next_transfer(pl022, transfer)) {
+		message->state = STATE_ERROR;
+		message->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+	/* Flush the FIFOs and let's go! */
+	flush(pl022);
+	writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+}
+
+/**
+ * NOT IMPLEMENTED
+ * configure_dma - It configures the DMA pipes for DMA transfers
+ * @data: SSP driver's private data structure
+ *
+ */
+static int configure_dma(void *data)
+{
+	struct pl022 *pl022 = data;
+	dev_dbg(&pl022->adev->dev, "configure DMA\n");
+	return -ENOTSUPP;
+}
+
+/**
+ * do_dma_transfer - It handles transfers of the current message
+ * if it is DMA xfer.
+ * NOT FULLY IMPLEMENTED
+ * @data: SSP driver's private data structure
+ */
+static void do_dma_transfer(void *data)
+{
+	struct pl022 *pl022 = data;
+
+	if (configure_dma(data)) {
+		dev_dbg(&pl022->adev->dev, "configuration of DMA Failed!\n");
+		goto err_config_dma;
+	}
+
+	/* TODO: Implememt DMA setup of pipes here */
+
+	/* Enable target chip, set up transfer */
+	pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+	if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
+		/* Error path */
+		pl022->cur_msg->state = STATE_ERROR;
+		pl022->cur_msg->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+	/* Enable SSP */
+	writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+	       SSP_CR1(pl022->virtbase));
+
+	/* TODO: Enable the DMA transfer here */
+	return;
+
+ err_config_dma:
+	pl022->cur_msg->state = STATE_ERROR;
+	pl022->cur_msg->status = -EIO;
+	giveback(pl022);
+	return;
+}
+
+static void do_interrupt_transfer(void *data)
+{
+	struct pl022 *pl022 = data;
+
+	/* Enable target chip */
+	pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+	if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
+		/* Error path */
+		pl022->cur_msg->state = STATE_ERROR;
+		pl022->cur_msg->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+	/* Enable SSP, turn on interrupts */
+	writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+	       SSP_CR1(pl022->virtbase));
+	writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+}
+
+static void do_polling_transfer(void *data)
+{
+	struct pl022 *pl022 = data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+	struct chip_data *chip;
+
+	chip = pl022->cur_chip;
+	message = pl022->cur_msg;
+
+	while (message->state != STATE_DONE) {
+		/* Handle for abort */
+		if (message->state == STATE_ERROR)
+			break;
+		transfer = pl022->cur_transfer;
+
+		/* Delay if requested at end of transfer */
+		if (message->state == STATE_RUNNING) {
+			previous =
+			    list_entry(transfer->transfer_list.prev,
+				       struct spi_transfer, transfer_list);
+			if (previous->delay_usecs)
+				udelay(previous->delay_usecs);
+			if (previous->cs_change)
+				pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+		} else {
+			/* STATE_START */
+			message->state = STATE_RUNNING;
+			pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+		}
+
+		/* Configuration Changing Per Transfer */
+		if (set_up_next_transfer(pl022, transfer)) {
+			/* Error path */
+			message->state = STATE_ERROR;
+			break;
+		}
+		/* Flush FIFOs and enable SSP */
+		flush(pl022);
+		writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+		       SSP_CR1(pl022->virtbase));
+
+		dev_dbg(&pl022->adev->dev, "POLLING TRANSFER ONGOING ... \n");
+		/* FIXME: insert a timeout so we don't hang here indefinately */
+		while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
+			readwriter(pl022);
+
+		/* Update total byte transfered */
+		message->actual_length += pl022->cur_transfer->len;
+		if (pl022->cur_transfer->cs_change)
+			pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
+		/* Move to next transfer */
+		message->state = next_transfer(pl022);
+	}
+
+	/* Handle end of message */
+	if (message->state == STATE_DONE)
+		message->status = 0;
+	else
+		message->status = -EIO;
+
+	giveback(pl022);
+	return;
+}
+
+/**
+ * pump_messages - Workqueue function which processes spi message queue
+ * @data: pointer to private data of SSP driver
+ *
+ * This function checks if there is any spi message in the queue that
+ * needs processing and delegate control to appropriate function
+ * do_polling_transfer()/do_interrupt_transfer()/do_dma_transfer()
+ * based on the kind of the transfer
+ *
+ */
+static void pump_messages(struct work_struct *work)
+{
+	struct pl022 *pl022 =
+		container_of(work, struct pl022, pump_messages);
+	unsigned long flags;
+
+	/* Lock queue and check for queue work */
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+	if (list_empty(&pl022->queue) || pl022->run == QUEUE_STOPPED) {
+		pl022->busy = 0;
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return;
+	}
+	/* Make sure we are not already running a message */
+	if (pl022->cur_msg) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return;
+	}
+	/* Extract head of queue */
+	pl022->cur_msg =
+	    list_entry(pl022->queue.next, struct spi_message, queue);
+
+	list_del_init(&pl022->cur_msg->queue);
+	pl022->busy = 1;
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	/* Initial message state */
+	pl022->cur_msg->state = STATE_START;
+	pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next,
+					    struct spi_transfer,
+					    transfer_list);
+
+	/* Setup the SPI using the per chip configuration */
+	pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
+	/*
+	 * We enable the clock here, then the clock will be disabled when
+	 * giveback() is called in each method (poll/interrupt/DMA)
+	 */
+	clk_enable(pl022->clk);
+	restore_state(pl022);
+	flush(pl022);
+
+	if (pl022->cur_chip->xfer_type == POLLING_TRANSFER)
+		do_polling_transfer(pl022);
+	else if (pl022->cur_chip->xfer_type == INTERRUPT_TRANSFER)
+		do_interrupt_transfer(pl022);
+	else
+		do_dma_transfer(pl022);
+}
+
+
+static int __init init_queue(struct pl022 *pl022)
+{
+	INIT_LIST_HEAD(&pl022->queue);
+	spin_lock_init(&pl022->queue_lock);
+
+	pl022->run = QUEUE_STOPPED;
+	pl022->busy = 0;
+
+	tasklet_init(&pl022->pump_transfers,
+			pump_transfers,	(unsigned long)pl022);
+
+	INIT_WORK(&pl022->pump_messages, pump_messages);
+	pl022->workqueue = create_singlethread_workqueue(
+					dev_name(pl022->master->dev.parent));
+	if (pl022->workqueue == NULL)
+		return -EBUSY;
+
+	return 0;
+}
+
+
+static int start_queue(struct pl022 *pl022)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+
+	if (pl022->run == QUEUE_RUNNING || pl022->busy) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return -EBUSY;
+	}
+
+	pl022->run = QUEUE_RUNNING;
+	pl022->cur_msg = NULL;
+	pl022->cur_transfer = NULL;
+	pl022->cur_chip = NULL;
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	queue_work(pl022->workqueue, &pl022->pump_messages);
+
+	return 0;
+}
+
+
+static int stop_queue(struct pl022 *pl022)
+{
+	unsigned long flags;
+	unsigned limit = 500;
+	int status = 0;
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+
+	/* This is a bit lame, but is optimized for the common execution path.
+	 * A wait_queue on the pl022->busy could be used, but then the common
+	 * execution path (pump_messages) would be required to call wake_up or
+	 * friends on every SPI message. Do this instead */
+	pl022->run = QUEUE_STOPPED;
+	while (!list_empty(&pl022->queue) && pl022->busy && limit--) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		msleep(10);
+		spin_lock_irqsave(&pl022->queue_lock, flags);
+	}
+
+	if (!list_empty(&pl022->queue) || pl022->busy)
+		status = -EBUSY;
+
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	return status;
+}
+
+static int destroy_queue(struct pl022 *pl022)
+{
+	int status;
+
+	status = stop_queue(pl022);
+	/* we are unloading the module or failing to load (only two calls
+	 * to this routine), and neither call can handle a return value.
+	 * However, destroy_workqueue calls flush_workqueue, and that will
+	 * block until all work is done.  If the reason that stop_queue
+	 * timed out is that the work will never finish, then it does no
+	 * good to call destroy_workqueue, so return anyway. */
+	if (status != 0)
+		return status;
+
+	destroy_workqueue(pl022->workqueue);
+
+	return 0;
+}
+
+static int verify_controller_parameters(struct pl022 *pl022,
+					struct pl022_config_chip *chip_info)
+{
+	if ((chip_info->lbm != LOOPBACK_ENABLED)
+	    && (chip_info->lbm != LOOPBACK_DISABLED)) {
+		dev_err(chip_info->dev,
+			"loopback Mode is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI)
+	    || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) {
+		dev_err(chip_info->dev,
+			"interface is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) &&
+	    (!pl022->vendor->unidir)) {
+		dev_err(chip_info->dev,
+			"unidirectional mode not supported in this "
+			"hardware version\n");
+		return -EINVAL;
+	}
+	if ((chip_info->hierarchy != SSP_MASTER)
+	    && (chip_info->hierarchy != SSP_SLAVE)) {
+		dev_err(chip_info->dev,
+			"hierarchy is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN)
+	    || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) {
+		dev_err(chip_info->dev,
+			"cpsdvsr is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->endian_rx != SSP_RX_MSB)
+	    && (chip_info->endian_rx != SSP_RX_LSB)) {
+		dev_err(chip_info->dev,
+			"RX FIFO endianess is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->endian_tx != SSP_TX_MSB)
+	    && (chip_info->endian_tx != SSP_TX_LSB)) {
+		dev_err(chip_info->dev,
+			"TX FIFO endianess is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->data_size < SSP_DATA_BITS_4)
+	    || (chip_info->data_size > SSP_DATA_BITS_32)) {
+		dev_err(chip_info->dev,
+			"DATA Size is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->com_mode != INTERRUPT_TRANSFER)
+	    && (chip_info->com_mode != DMA_TRANSFER)
+	    && (chip_info->com_mode != POLLING_TRANSFER)) {
+		dev_err(chip_info->dev,
+			"Communication mode is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM)
+	    || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) {
+		dev_err(chip_info->dev,
+			"RX FIFO Trigger Level is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC)
+	    || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) {
+		dev_err(chip_info->dev,
+			"TX FIFO Trigger Level is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) {
+		if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE)
+		    && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) {
+			dev_err(chip_info->dev,
+				"Clock Phase is configured incorrectly\n");
+			return -EINVAL;
+		}
+		if ((chip_info->clk_pol != SSP_CLK_POL_IDLE_LOW)
+		    && (chip_info->clk_pol != SSP_CLK_POL_IDLE_HIGH)) {
+			dev_err(chip_info->dev,
+				"Clock Polarity is configured incorrectly\n");
+			return -EINVAL;
+		}
+	}
+	if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) {
+		if ((chip_info->ctrl_len < SSP_BITS_4)
+		    || (chip_info->ctrl_len > SSP_BITS_32)) {
+			dev_err(chip_info->dev,
+				"CTRL LEN is configured incorrectly\n");
+			return -EINVAL;
+		}
+		if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO)
+		    && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) {
+			dev_err(chip_info->dev,
+				"Wait State is configured incorrectly\n");
+			return -EINVAL;
+		}
+		if ((chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX)
+		    && (chip_info->duplex !=
+			SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) {
+			dev_err(chip_info->dev,
+				"DUPLEX is configured incorrectly\n");
+			return -EINVAL;
+		}
+	}
+	if (chip_info->cs_control == NULL) {
+		dev_warn(chip_info->dev,
+			"Chip Select Function is NULL for this chip\n");
+		chip_info->cs_control = null_cs_control;
+	}
+	return 0;
+}
+
+/**
+ * pl022_transfer - transfer function registered to SPI master framework
+ * @spi: spi device which is requesting transfer
+ * @msg: spi message which is to handled is queued to driver queue
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. It will queue the spi_message in the queue of driver if
+ * the queue is not stopped and return.
+ */
+static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct pl022 *pl022 = spi_master_get_devdata(spi->master);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+
+	if (pl022->run == QUEUE_STOPPED) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return -ESHUTDOWN;
+	}
+	msg->actual_length = 0;
+	msg->status = -EINPROGRESS;
+	msg->state = STATE_START;
+
+	list_add_tail(&msg->queue, &pl022->queue);
+	if (pl022->run == QUEUE_RUNNING && !pl022->busy)
+		queue_work(pl022->workqueue, &pl022->pump_messages);
+
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+	return 0;
+}
+
+static int calculate_effective_freq(struct pl022 *pl022,
+				    int freq,
+				    struct ssp_clock_params *clk_freq)
+{
+	/* Lets calculate the frequency parameters */
+	u16 cpsdvsr = 2;
+	u16 scr = 0;
+	bool freq_found = false;
+	u32 rate;
+	u32 max_tclk;
+	u32 min_tclk;
+
+	rate = clk_get_rate(pl022->clk);
+	/* cpsdvscr = 2 & scr 0 */
+	max_tclk = (rate / (CPSDVR_MIN * (1 + SCR_MIN)));
+	/* cpsdvsr = 254 & scr = 255 */
+	min_tclk = (rate / (CPSDVR_MAX * (1 + SCR_MAX)));
+
+	if ((freq <= max_tclk) && (freq >= min_tclk)) {
+		while (cpsdvsr <= CPSDVR_MAX && !freq_found) {
+			while (scr <= SCR_MAX && !freq_found) {
+				if ((rate /
+				     (cpsdvsr * (1 + scr))) > freq)
+					scr += 1;
+				else {
+					/*
+					 * This bool is made true when
+					 * effective frequency >=
+					 * target frequency is found
+					 */
+					freq_found = true;
+					if ((rate /
+					     (cpsdvsr * (1 + scr))) != freq) {
+						if (scr == SCR_MIN) {
+							cpsdvsr -= 2;
+							scr = SCR_MAX;
+						} else
+							scr -= 1;
+					}
+				}
+			}
+			if (!freq_found) {
+				cpsdvsr += 2;
+				scr = SCR_MIN;
+			}
+		}
+		if (cpsdvsr != 0) {
+			dev_dbg(&pl022->adev->dev,
+				"SSP Effective Frequency is %u\n",
+				(rate / (cpsdvsr * (1 + scr))));
+			clk_freq->cpsdvsr = (u8) (cpsdvsr & 0xFF);
+			clk_freq->scr = (u8) (scr & 0xFF);
+			dev_dbg(&pl022->adev->dev,
+				"SSP cpsdvsr = %d, scr = %d\n",
+				clk_freq->cpsdvsr, clk_freq->scr);
+		}
+	} else {
+		dev_err(&pl022->adev->dev,
+			"controller data is incorrect: out of range frequency");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * NOT IMPLEMENTED
+ * process_dma_info - Processes the DMA info provided by client drivers
+ * @chip_info: chip info provided by client device
+ * @chip: Runtime state maintained by the SSP controller for each spi device
+ *
+ * This function processes and stores DMA config provided by client driver
+ * into the runtime state maintained by the SSP controller driver
+ */
+static int process_dma_info(struct pl022_config_chip *chip_info,
+			    struct chip_data *chip)
+{
+	dev_err(chip_info->dev,
+		"cannot process DMA info, DMA not implemented!\n");
+	return -ENOTSUPP;
+}
+
+/**
+ * pl022_setup - setup function registered to SPI master framework
+ * @spi: spi device which is requesting setup
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. If it is the first time when setup is called by this device,
+ * this function will initialize the runtime state for this chip and save
+ * the same in the device structure. Else it will update the runtime info
+ * with the updated chip info. Nothing is really being written to the
+ * controller hardware here, that is not done until the actual transfer
+ * commence.
+ */
+
+/* FIXME: JUST GUESSING the spi->mode bits understood by this driver */
+#define MODEBITS	(SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
+			| SPI_LSB_FIRST | SPI_LOOP)
+
+static int pl022_setup(struct spi_device *spi)
+{
+	struct pl022_config_chip *chip_info;
+	struct chip_data *chip;
+	int status = 0;
+	struct pl022 *pl022 = spi_master_get_devdata(spi->master);
+
+	if (spi->mode & ~MODEBITS) {
+		dev_dbg(&spi->dev, "unsupported mode bits %x\n",
+			spi->mode & ~MODEBITS);
+		return -EINVAL;
+	}
+
+	if (!spi->max_speed_hz)
+		return -EINVAL;
+
+	/* Get controller_state if one is supplied */
+	chip = spi_get_ctldata(spi);
+
+	if (chip == NULL) {
+		chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+		if (!chip) {
+			dev_err(&spi->dev,
+				"cannot allocate controller state\n");
+			return -ENOMEM;
+		}
+		dev_dbg(&spi->dev,
+			"allocated memory for controller's runtime state\n");
+	}
+
+	/* Get controller data if one is supplied */
+	chip_info = spi->controller_data;
+
+	if (chip_info == NULL) {
+		/* spi_board_info.controller_data not is supplied */
+		dev_dbg(&spi->dev,
+			"using default controller_data settings\n");
+
+		chip_info =
+			kzalloc(sizeof(struct pl022_config_chip), GFP_KERNEL);
+
+		if (!chip_info) {
+			dev_err(&spi->dev,
+				"cannot allocate controller data\n");
+			status = -ENOMEM;
+			goto err_first_setup;
+		}
+
+		dev_dbg(&spi->dev, "allocated memory for controller data\n");
+
+		/* Pointer back to the SPI device */
+		chip_info->dev = &spi->dev;
+		/*
+		 * Set controller data default values:
+		 * Polling is supported by default
+		 */
+		chip_info->lbm = LOOPBACK_DISABLED;
+		chip_info->com_mode = POLLING_TRANSFER;
+		chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI;
+		chip_info->hierarchy = SSP_SLAVE;
+		chip_info->slave_tx_disable = DO_NOT_DRIVE_TX;
+		chip_info->endian_tx = SSP_TX_LSB;
+		chip_info->endian_rx = SSP_RX_LSB;
+		chip_info->data_size = SSP_DATA_BITS_12;
+		chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM;
+		chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC;
+		chip_info->clk_phase = SSP_CLK_FALLING_EDGE;
+		chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW;
+		chip_info->ctrl_len = SSP_BITS_8;
+		chip_info->wait_state = SSP_MWIRE_WAIT_ZERO;
+		chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX;
+		chip_info->cs_control = null_cs_control;
+	} else {
+		dev_dbg(&spi->dev,
+			"using user supplied controller_data settings\n");
+	}
+
+	/*
+	 * We can override with custom divisors, else we use the board
+	 * frequency setting
+	 */
+	if ((0 == chip_info->clk_freq.cpsdvsr)
+	    && (0 == chip_info->clk_freq.scr)) {
+		status = calculate_effective_freq(pl022,
+						  spi->max_speed_hz,
+						  &chip_info->clk_freq);
+		if (status < 0)
+			goto err_config_params;
+	} else {
+		if ((chip_info->clk_freq.cpsdvsr % 2) != 0)
+			chip_info->clk_freq.cpsdvsr =
+				chip_info->clk_freq.cpsdvsr - 1;
+	}
+	status = verify_controller_parameters(pl022, chip_info);
+	if (status) {
+		dev_err(&spi->dev, "controller data is incorrect");
+		goto err_config_params;
+	}
+	/* Now set controller state based on controller data */
+	chip->xfer_type = chip_info->com_mode;
+	chip->cs_control = chip_info->cs_control;
+
+	if (chip_info->data_size <= 8) {
+		dev_dbg(&spi->dev, "1 <= n <=8 bits per word\n");
+		chip->n_bytes = 1;
+		chip->read = READING_U8;
+		chip->write = WRITING_U8;
+	} else if (chip_info->data_size <= 16) {
+		dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n");
+		chip->n_bytes = 2;
+		chip->read = READING_U16;
+		chip->write = WRITING_U16;
+	} else {
+		if (pl022->vendor->max_bpw >= 32) {
+			dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n");
+			chip->n_bytes = 4;
+			chip->read = READING_U32;
+			chip->write = WRITING_U32;
+		} else {
+			dev_err(&spi->dev,
+				"illegal data size for this controller!\n");
+			dev_err(&spi->dev,
+				"a standard pl022 can only handle "
+				"1 <= n <= 16 bit words\n");
+			goto err_config_params;
+		}
+	}
+
+	/* Now Initialize all register settings required for this chip */
+	chip->cr0 = 0;
+	chip->cr1 = 0;
+	chip->dmacr = 0;
+	chip->cpsr = 0;
+	if ((chip_info->com_mode == DMA_TRANSFER)
+	    && ((pl022->master_info)->enable_dma)) {
+		chip->enable_dma = 1;
+		dev_dbg(&spi->dev, "DMA mode set in controller state\n");
+		status = process_dma_info(chip_info, chip);
+		if (status < 0)
+			goto err_config_params;
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
+			       SSP_DMACR_MASK_RXDMAE, 0);
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
+			       SSP_DMACR_MASK_TXDMAE, 1);
+	} else {
+		chip->enable_dma = 0;
+		dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n");
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
+			       SSP_DMACR_MASK_RXDMAE, 0);
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
+			       SSP_DMACR_MASK_TXDMAE, 1);
+	}
+
+	chip->cpsr = chip_info->clk_freq.cpsdvsr;
+
+	SSP_WRITE_BITS(chip->cr0, chip_info->data_size, SSP_CR0_MASK_DSS, 0);
+	SSP_WRITE_BITS(chip->cr0, chip_info->duplex, SSP_CR0_MASK_HALFDUP, 5);
+	SSP_WRITE_BITS(chip->cr0, chip_info->clk_pol, SSP_CR0_MASK_SPO, 6);
+	SSP_WRITE_BITS(chip->cr0, chip_info->clk_phase, SSP_CR0_MASK_SPH, 7);
+	SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8);
+	SSP_WRITE_BITS(chip->cr0, chip_info->ctrl_len, SSP_CR0_MASK_CSS, 16);
+	SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF, 21);
+	SSP_WRITE_BITS(chip->cr1, chip_info->lbm, SSP_CR1_MASK_LBM, 0);
+	SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1);
+	SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2);
+	SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3);
+	SSP_WRITE_BITS(chip->cr1, chip_info->endian_rx, SSP_CR1_MASK_RENDN, 4);
+	SSP_WRITE_BITS(chip->cr1, chip_info->endian_tx, SSP_CR1_MASK_TENDN, 5);
+	SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, SSP_CR1_MASK_MWAIT, 6);
+	SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, SSP_CR1_MASK_RXIFLSEL, 7);
+	SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, SSP_CR1_MASK_TXIFLSEL, 10);
+
+	/* Save controller_state */
+	spi_set_ctldata(spi, chip);
+	return status;
+ err_config_params:
+ err_first_setup:
+	kfree(chip);
+	return status;
+}
+
+/**
+ * pl022_cleanup - cleanup function registered to SPI master framework
+ * @spi: spi device which is requesting cleanup
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. It will free the runtime state of chip.
+ */
+static void pl022_cleanup(struct spi_device *spi)
+{
+	struct chip_data *chip = spi_get_ctldata(spi);
+
+	spi_set_ctldata(spi, NULL);
+	kfree(chip);
+}
+
+
+static int __init
+pl022_probe(struct amba_device *adev, struct amba_id *id)
+{
+	struct device *dev = &adev->dev;
+	struct pl022_ssp_controller *platform_info = adev->dev.platform_data;
+	struct spi_master *master;
+	struct pl022 *pl022 = NULL;	/*Data for this driver */
+	int status = 0;
+
+	dev_info(&adev->dev,
+		 "ARM PL022 driver, device ID: 0x%08x\n", adev->periphid);
+	if (platform_info == NULL) {
+		dev_err(&adev->dev, "probe - no platform data supplied\n");
+		status = -ENODEV;
+		goto err_no_pdata;
+	}
+
+	/* Allocate master with space for data */
+	master = spi_alloc_master(dev, sizeof(struct pl022));
+	if (master == NULL) {
+		dev_err(&adev->dev, "probe - cannot alloc SPI master\n");
+		status = -ENOMEM;
+		goto err_no_master;
+	}
+
+	pl022 = spi_master_get_devdata(master);
+	pl022->master = master;
+	pl022->master_info = platform_info;
+	pl022->adev = adev;
+	pl022->vendor = id->data;
+
+	/*
+	 * Bus Number Which has been Assigned to this SSP controller
+	 * on this board
+	 */
+	master->bus_num = platform_info->bus_id;
+	master->num_chipselect = platform_info->num_chipselect;
+	master->cleanup = pl022_cleanup;
+	master->setup = pl022_setup;
+	master->transfer = pl022_transfer;
+
+	dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num);
+
+	status = amba_request_regions(adev, NULL);
+	if (status)
+		goto err_no_ioregion;
+
+	pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
+	if (pl022->virtbase == NULL) {
+		status = -ENOMEM;
+		goto err_no_ioremap;
+	}
+	printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
+	       adev->res.start, pl022->virtbase);
+
+	pl022->clk = clk_get(&adev->dev, NULL);
+	if (IS_ERR(pl022->clk)) {
+		status = PTR_ERR(pl022->clk);
+		dev_err(&adev->dev, "could not retrieve SSP/SPI bus clock\n");
+		goto err_no_clk;
+	}
+
+	/* Disable SSP */
+	clk_enable(pl022->clk);
+	writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
+	       SSP_CR1(pl022->virtbase));
+	load_ssp_default_config(pl022);
+	clk_disable(pl022->clk);
+
+	status = request_irq(adev->irq[0], pl022_interrupt_handler, 0, "pl022",
+			     pl022);
+	if (status < 0) {
+		dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status);
+		goto err_no_irq;
+	}
+	/* Initialize and start queue */
+	status = init_queue(pl022);
+	if (status != 0) {
+		dev_err(&adev->dev, "probe - problem initializing queue\n");
+		goto err_init_queue;
+	}
+	status = start_queue(pl022);
+	if (status != 0) {
+		dev_err(&adev->dev, "probe - problem starting queue\n");
+		goto err_start_queue;
+	}
+	/* Register with the SPI framework */
+	amba_set_drvdata(adev, pl022);
+	status = spi_register_master(master);
+	if (status != 0) {
+		dev_err(&adev->dev,
+			"probe - problem registering spi master\n");
+		goto err_spi_register;
+	}
+	dev_dbg(dev, "probe succeded\n");
+	return 0;
+
+ err_spi_register:
+ err_start_queue:
+ err_init_queue:
+	destroy_queue(pl022);
+	free_irq(adev->irq[0], pl022);
+ err_no_irq:
+	clk_put(pl022->clk);
+ err_no_clk:
+	iounmap(pl022->virtbase);
+ err_no_ioremap:
+	amba_release_regions(adev);
+ err_no_ioregion:
+	spi_master_put(master);
+ err_no_master:
+ err_no_pdata:
+	return status;
+}
+
+static int __exit
+pl022_remove(struct amba_device *adev)
+{
+	struct pl022 *pl022 = amba_get_drvdata(adev);
+	int status = 0;
+	if (!pl022)
+		return 0;
+
+	/* Remove the queue */
+	status = destroy_queue(pl022);
+	if (status != 0) {
+		dev_err(&adev->dev,
+			"queue remove failed (%d)\n", status);
+		return status;
+	}
+	load_ssp_default_config(pl022);
+	free_irq(adev->irq[0], pl022);
+	clk_disable(pl022->clk);
+	clk_put(pl022->clk);
+	iounmap(pl022->virtbase);
+	amba_release_regions(adev);
+	tasklet_disable(&pl022->pump_transfers);
+	spi_unregister_master(pl022->master);
+	spi_master_put(pl022->master);
+	amba_set_drvdata(adev, NULL);
+	dev_dbg(&adev->dev, "remove succeded\n");
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pl022_suspend(struct amba_device *adev, pm_message_t state)
+{
+	struct pl022 *pl022 = amba_get_drvdata(adev);
+	int status = 0;
+
+	status = stop_queue(pl022);
+	if (status) {
+		dev_warn(&adev->dev, "suspend cannot stop queue\n");
+		return status;
+	}
+
+	clk_enable(pl022->clk);
+	load_ssp_default_config(pl022);
+	clk_disable(pl022->clk);
+	dev_dbg(&adev->dev, "suspended\n");
+	return 0;
+}
+
+static int pl022_resume(struct amba_device *adev)
+{
+	struct pl022 *pl022 = amba_get_drvdata(adev);
+	int status = 0;
+
+	/* Start the queue running */
+	status = start_queue(pl022);
+	if (status)
+		dev_err(&adev->dev, "problem starting queue (%d)\n", status);
+	else
+		dev_dbg(&adev->dev, "resumed\n");
+
+	return status;
+}
+#else
+#define pl022_suspend NULL
+#define pl022_resume NULL
+#endif	/* CONFIG_PM */
+
+static struct vendor_data vendor_arm = {
+	.fifodepth = 8,
+	.max_bpw = 16,
+	.unidir = false,
+};
+
+
+static struct vendor_data vendor_st = {
+	.fifodepth = 32,
+	.max_bpw = 32,
+	.unidir = false,
+};
+
+static struct amba_id pl022_ids[] = {
+	{
+		/*
+		 * ARM PL022 variant, this has a 16bit wide
+		 * and 8 locations deep TX/RX FIFO
+		 */
+		.id	= 0x00041022,
+		.mask	= 0x000fffff,
+		.data	= &vendor_arm,
+	},
+	{
+		/*
+		 * ST Micro derivative, this has 32bit wide
+		 * and 32 locations deep TX/RX FIFO
+		 */
+		.id	= 0x00108022,
+		.mask	= 0xffffffff,
+		.data	= &vendor_st,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver pl022_driver = {
+	.drv = {
+		.name	= "ssp-pl022",
+	},
+	.id_table	= pl022_ids,
+	.probe		= pl022_probe,
+	.remove		= __exit_p(pl022_remove),
+	.suspend        = pl022_suspend,
+	.resume         = pl022_resume,
+};
+
+
+static int __init pl022_init(void)
+{
+	return amba_driver_register(&pl022_driver);
+}
+
+module_init(pl022_init);
+
+static void __exit pl022_exit(void)
+{
+	amba_driver_unregister(&pl022_driver);
+}
+
+module_exit(pl022_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index f2447a5476b..bbf9371cd28 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -17,6 +17,7 @@
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
diff --git a/drivers/staging/go7007/go7007.txt b/drivers/staging/go7007/go7007.txt
index 9f6772bc68c..1c2907c1dc8 100644
--- a/drivers/staging/go7007/go7007.txt
+++ b/drivers/staging/go7007/go7007.txt
@@ -2,7 +2,7 @@ This is a driver for the WIS GO7007SB multi-format video encoder.
 
 Pete Eberlein <pete@sensoray.com>
 
-The driver was orignally released under the GPL and is currently hosted at:
+The driver was originally released under the GPL and is currently hosted at:
 http://nikosapi.org/wiki/index.php/WIS_Go7007_Linux_driver
 The go7007 firmware can be acquired from the package on the site above.
 
@@ -24,7 +24,7 @@ These should be used instead of the non-standard GO7007 ioctls described
 below.
 
 
-The README files from the orignal package appear below:
+The README files from the original package appears below:
 
 ---------------------------------------------------------------------------
                      WIS GO7007SB Public Linux Driver
diff --git a/drivers/staging/panel/lcd-panel-cgram.txt b/drivers/staging/panel/lcd-panel-cgram.txt
index f9ceef4322a..7f82c905763 100644
--- a/drivers/staging/panel/lcd-panel-cgram.txt
+++ b/drivers/staging/panel/lcd-panel-cgram.txt
@@ -3,7 +3,7 @@ characters 0 to 7. The escape code to define a new character is
 '\e[LG' followed by one digit from 0 to 7, representing the character
 number, and up to 8 couples of hex digits terminated by a semi-colon
 (';'). Each couple of digits represents a line, with 1-bits for each
-illuminated pixel with LSB on the right. Lines are numberred from the
+illuminated pixel with LSB on the right. Lines are numbered from the
 top of the character to the bottom. On a 5x7 matrix, only the 5 lower
 bits of the 7 first bytes are used for each character. If the string
 is incomplete, only complete lines will be redefined. Here are some
diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c
index c00f9ab9c46..2edf2999f5c 100644
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -5664,7 +5664,7 @@ VOID 	AsicUpdateProtect(
 #if 0
 	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
 #else
-	// If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
         if ((
 #ifdef DOT11_N_SUPPORT
 			(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
diff --git a/drivers/staging/rt2870/common/mlme.c b/drivers/staging/rt2870/common/mlme.c
index 8a82cee8bf2..a26bc033337 100644
--- a/drivers/staging/rt2870/common/mlme.c
+++ b/drivers/staging/rt2870/common/mlme.c
@@ -5561,7 +5561,7 @@ VOID 	AsicUpdateProtect(
 #if 0
 	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
 #else
-	// If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
         if ((
 #ifdef DOT11_N_SUPPORT
 			(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
diff --git a/drivers/staging/rt3070/common/mlme.c b/drivers/staging/rt3070/common/mlme.c
index 0ffbfa36699..0189bab013c 100644
--- a/drivers/staging/rt3070/common/mlme.c
+++ b/drivers/staging/rt3070/common/mlme.c
@@ -5575,7 +5575,7 @@ VOID 	AsicUpdateProtect(
 	RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
 	MacReg &= 0xFF0000FF;
 
-	// If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
     if ((
 #ifdef DOT11_N_SUPPORT
 		(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index 888198c9a10..824e65bdc43 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -2424,7 +2424,7 @@ int hfa384x_drvr_ramdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len)
 *	0		success
 *	>0		f/w reported error - f/w status code
 *	<0		driver reported error
-*	-ETIMEOUT	timout waiting for the cmd regs to become
+*	-ETIMEDOUT	timout waiting for the cmd regs to become
 *			available, or waiting for the control reg
 *			to indicate the Aux port is enabled.
 *	-ENODATA	the buffer does NOT contain a valid PDA.
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 7cf74f8c2db..b0dbf4157d2 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -47,7 +47,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 	struct usb_hcd *hcd;
 
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		dbg("resource[1] is not IORESOURCE_IRQ");
 		return -ENOMEM;
 	}
 
@@ -65,12 +65,18 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 	if (hcd->regs == NULL) {
-		pr_debug("ioremap failed");
+		dbg("ioremap failed");
 		retval = -ENOMEM;
 		goto err2;
 	}
 
-	usb_host_clock = clk_get(&pdev->dev, "usb_host");
+	usb_host_clock = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(usb_host_clock)) {
+		dbg("clk_get failed");
+		retval = PTR_ERR(usb_host_clock);
+		goto err3;
+	}
+
 	ep93xx_start_hc(&pdev->dev);
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -80,6 +86,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 		return retval;
 
 	ep93xx_stop_hc(&pdev->dev);
+err3:
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index eabf20eeb37..db964db42d3 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -102,7 +102,7 @@ struct edgeport_port {
 	__u8 shadow_mcr;
 	__u8 shadow_lsr;
 	__u8 lsr_mask;
-	__u32 ump_read_timeout;		/* Number of miliseconds the UMP will
+	__u32 ump_read_timeout;		/* Number of milliseconds the UMP will
 					   wait without data before completing
 					   a read short */
 	int baud_rate;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 74712cb8399..2b5a691064b 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -397,7 +397,7 @@ config FB_SA1100
 
 config FB_IMX
 	tristate "Motorola i.MX LCD support"
-	depends on FB && (ARCH_IMX || ARCH_MX2)
+	depends on FB && (ARCH_MX1 || ARCH_MX2)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1759,6 +1759,16 @@ config FB_68328
 	  Say Y here if you want to support the built-in frame buffer of
 	  the Motorola 68328 CPU family.
 
+config FB_PXA168
+	tristate "PXA168/910 LCD framebuffer support"
+	depends on FB && (CPU_PXA168 || CPU_PXA910)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Marvell
+	  MMP processor.
+
 config FB_PXA
 	tristate "PXA LCD framebuffer support"
 	depends on FB && ARCH_PXA
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index d8d0be5151e..01a819f4737 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -97,6 +97,7 @@ obj-$(CONFIG_FB_GBE)              += gbefb.o
 obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
 obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
 obj-$(CONFIG_FB_PXA)		  += pxafb.o
+obj-$(CONFIG_FB_PXA168)		  += pxa168fb.o
 obj-$(CONFIG_FB_W100)		  += w100fb.o
 obj-$(CONFIG_FB_TMIO)		  += tmiofb.o
 obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index d1f80bac54f..fb8163d181a 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -351,7 +351,7 @@ static int clcdfb_register(struct clcd_fb *fb)
 	}
 
 	fb->fb.fix.mmio_start	= fb->dev->res.start;
-	fb->fb.fix.mmio_len	= 4096;
+	fb->fb.fix.mmio_len	= resource_size(&fb->dev->res);
 
 	fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
 	if (!fb->regs) {
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 9894de1c9b9..b7af5256e88 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -706,7 +706,7 @@ static void mx3fb_dma_done(void *arg)
 	dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
 
 	/* We only need one interrupt, it will be re-enabled as needed */
-	disable_irq(ichannel->eof_irq);
+	disable_irq_nosync(ichannel->eof_irq);
 
 	complete(&mx3_fbi->flip_cmpl);
 }
@@ -1366,7 +1366,7 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 
 	mx3fb_blank(FB_BLANK_UNBLANK, fbi);
 
-	dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+	dev_info(dev, "registered, using mode %s\n", fb_mode);
 
 	ret = register_framebuffer(fbi);
 	if (ret < 0)
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 8aa6e47202b..5d4f34887a2 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -133,8 +133,7 @@ struct {
 	struct lcd_ctrl_extif	*extif;
 	struct lcd_ctrl		*int_ctrl;
 
-	void			(*power_up)(struct device *dev);
-	void			(*power_down)(struct device *dev);
+	struct clk		*sys_ck;
 } hwa742;
 
 struct lcd_ctrl hwa742_ctrl;
@@ -915,14 +914,13 @@ static void hwa742_suspend(void)
 	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
 	/* Enable sleep mode */
 	hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1);
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(hwa742.fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 }
 
 static void hwa742_resume(void)
 {
-	if (hwa742.power_up != NULL)
-		hwa742.power_up(hwa742.fbdev->dev);
+	clk_enable(hwa742.sys_ck);
+
 	/* Disable sleep mode */
 	hwa742_write_reg(HWA742_POWER_SAVE, 0);
 	while (1) {
@@ -955,14 +953,13 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 	omapfb_conf = fbdev->dev->platform_data;
 	ctrl_conf = omapfb_conf->ctrl_platform_data;
 
-	if (ctrl_conf == NULL || ctrl_conf->get_clock_rate == NULL) {
+	if (ctrl_conf == NULL) {
 		dev_err(fbdev->dev, "HWA742: missing platform data\n");
 		r = -ENOENT;
 		goto err1;
 	}
 
-	hwa742.power_down = ctrl_conf->power_down;
-	hwa742.power_up = ctrl_conf->power_up;
+	hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");
 
 	spin_lock_init(&hwa742.req_lock);
 
@@ -972,12 +969,11 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 	if ((r = hwa742.extif->init(fbdev)) < 0)
 		goto err2;
 
-	ext_clk = ctrl_conf->get_clock_rate(fbdev->dev);
+	ext_clk = clk_get_rate(hwa742.sys_ck);
 	if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
 		goto err3;
 	hwa742.extif->set_timings(&hwa742.reg_timings);
-	if (hwa742.power_up != NULL)
-		hwa742.power_up(fbdev->dev);
+	clk_enable(hwa742.sys_ck);
 
 	calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
 	if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
@@ -1040,8 +1036,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 
 	return 0;
 err4:
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 err3:
 	hwa742.extif->cleanup();
 err2:
@@ -1055,8 +1050,7 @@ static void hwa742_cleanup(void)
 	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
 	hwa742.extif->cleanup();
 	hwa742.int_ctrl->cleanup();
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(hwa742.fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 }
 
 struct lcd_ctrl hwa742_ctrl = {
diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
new file mode 100644
index 00000000000..84d8327e47d
--- /dev/null
+++ b/drivers/video/pxa168fb.c
@@ -0,0 +1,803 @@
+/*
+ * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller
+ *
+ *  Copyright (C) 2008 Marvell International Ltd.
+ *  All rights reserved.
+ *
+ *  2009-02-16  adapted from original version for PXA168/910
+ *              Jun Nie <njun@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/uaccess.h>
+#include <video/pxa168fb.h>
+
+#include "pxa168fb.h"
+
+#define DEFAULT_REFRESH		60	/* Hz */
+
+static int determine_best_pix_fmt(struct fb_var_screeninfo *var)
+{
+	/*
+	 * Pseudocolor mode?
+	 */
+	if (var->bits_per_pixel == 8)
+		return PIX_FMT_PSEUDOCOLOR;
+
+	/*
+	 * Check for 565/1555.
+	 */
+	if (var->bits_per_pixel == 16 && var->red.length <= 5 &&
+	    var->green.length <= 6 && var->blue.length <= 5) {
+		if (var->transp.length == 0) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB565;
+			else
+				return PIX_FMT_BGR565;
+		}
+
+		if (var->transp.length == 1 && var->green.length <= 5) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB1555;
+			else
+				return PIX_FMT_BGR1555;
+		}
+
+		/* fall through */
+	}
+
+	/*
+	 * Check for 888/A888.
+	 */
+	if (var->bits_per_pixel <= 32 && var->red.length <= 8 &&
+	    var->green.length <= 8 && var->blue.length <= 8) {
+		if (var->bits_per_pixel == 24 && var->transp.length == 0) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB888PACK;
+			else
+				return PIX_FMT_BGR888PACK;
+		}
+
+		if (var->bits_per_pixel == 32 && var->transp.length == 8) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGBA888;
+			else
+				return PIX_FMT_BGRA888;
+		} else {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB888UNPACK;
+			else
+				return PIX_FMT_BGR888UNPACK;
+		}
+
+		/* fall through */
+	}
+
+	return -EINVAL;
+}
+
+static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt)
+{
+	switch (pix_fmt) {
+	case PIX_FMT_RGB565:
+		var->bits_per_pixel = 16;
+		var->red.offset = 11;    var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 6;
+		var->blue.offset = 0;    var->blue.length = 5;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_BGR565:
+		var->bits_per_pixel = 16;
+		var->red.offset = 0;     var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 6;
+		var->blue.offset = 11;   var->blue.length = 5;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_RGB1555:
+		var->bits_per_pixel = 16;
+		var->red.offset = 10;    var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 5;
+		var->blue.offset = 0;    var->blue.length = 5;
+		var->transp.offset = 15; var->transp.length = 1;
+		break;
+	case PIX_FMT_BGR1555:
+		var->bits_per_pixel = 16;
+		var->red.offset = 0;     var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 5;
+		var->blue.offset = 10;   var->blue.length = 5;
+		var->transp.offset = 15; var->transp.length = 1;
+		break;
+	case PIX_FMT_RGB888PACK:
+		var->bits_per_pixel = 24;
+		var->red.offset = 16;    var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 0;    var->blue.length = 8;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_BGR888PACK:
+		var->bits_per_pixel = 24;
+		var->red.offset = 0;     var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 16;   var->blue.length = 8;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_RGBA888:
+		var->bits_per_pixel = 32;
+		var->red.offset = 16;    var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 0;    var->blue.length = 8;
+		var->transp.offset = 24; var->transp.length = 8;
+		break;
+	case PIX_FMT_BGRA888:
+		var->bits_per_pixel = 32;
+		var->red.offset = 0;     var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 16;   var->blue.length = 8;
+		var->transp.offset = 24; var->transp.length = 8;
+		break;
+	case PIX_FMT_PSEUDOCOLOR:
+		var->bits_per_pixel = 8;
+		var->red.offset = 0;     var->red.length = 8;
+		var->green.offset = 0;   var->green.length = 8;
+		var->blue.offset = 0;    var->blue.length = 8;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	}
+}
+
+static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var,
+		     struct fb_videomode *mode, int pix_fmt, int ystretch)
+{
+	struct fb_info *info = fbi->info;
+
+	set_pix_fmt(var, pix_fmt);
+
+	var->xres = mode->xres;
+	var->yres = mode->yres;
+	var->xres_virtual = max(var->xres, var->xres_virtual);
+	if (ystretch)
+		var->yres_virtual = info->fix.smem_len /
+			(var->xres_virtual * (var->bits_per_pixel >> 3));
+	else
+		var->yres_virtual = max(var->yres, var->yres_virtual);
+	var->grayscale = 0;
+	var->accel_flags = FB_ACCEL_NONE;
+	var->pixclock = mode->pixclock;
+	var->left_margin = mode->left_margin;
+	var->right_margin = mode->right_margin;
+	var->upper_margin = mode->upper_margin;
+	var->lower_margin = mode->lower_margin;
+	var->hsync_len = mode->hsync_len;
+	var->vsync_len = mode->vsync_len;
+	var->sync = mode->sync;
+	var->vmode = FB_VMODE_NONINTERLACED;
+	var->rotate = FB_ROTATE_UR;
+}
+
+static int pxa168fb_check_var(struct fb_var_screeninfo *var,
+			      struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	int pix_fmt;
+
+	/*
+	 * Determine which pixel format we're going to use.
+	 */
+	pix_fmt = determine_best_pix_fmt(var);
+	if (pix_fmt < 0)
+		return pix_fmt;
+	set_pix_fmt(var, pix_fmt);
+	fbi->pix_fmt = pix_fmt;
+
+	/*
+	 * Basic geometry sanity checks.
+	 */
+	if (var->xoffset + var->xres > var->xres_virtual)
+		return -EINVAL;
+	if (var->yoffset + var->yres > var->yres_virtual)
+		return -EINVAL;
+	if (var->xres + var->right_margin +
+	    var->hsync_len + var->left_margin > 2048)
+		return -EINVAL;
+	if (var->yres + var->lower_margin +
+	    var->vsync_len + var->upper_margin > 2048)
+		return -EINVAL;
+
+	/*
+	 * Check size of framebuffer.
+	 */
+	if (var->xres_virtual * var->yres_virtual *
+	    (var->bits_per_pixel >> 3) > info->fix.smem_len)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * The hardware clock divider has an integer and a fractional
+ * stage:
+ *
+ *	clk2 = clk_in / integer_divider
+ *	clk_out = clk2 * (1 - (fractional_divider >> 12))
+ *
+ * Calculate integer and fractional divider for given clk_in
+ * and clk_out.
+ */
+static void set_clock_divider(struct pxa168fb_info *fbi,
+			      const struct fb_videomode *m)
+{
+	int divider_int;
+	int needed_pixclk;
+	u64 div_result;
+	u32 x = 0;
+
+	/*
+	 * Notice: The field pixclock is used by linux fb
+	 * is in pixel second. E.g. struct fb_videomode &
+	 * struct fb_var_screeninfo
+	 */
+
+	/*
+	 * Check input values.
+	 */
+	if (!m || !m->pixclock || !m->refresh) {
+		dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n");
+		return;
+	}
+
+	/*
+	 * Using PLL/AXI clock.
+	 */
+	x = 0x80000000;
+
+	/*
+	 * Calc divider according to refresh rate.
+	 */
+	div_result = 1000000000000ll;
+	do_div(div_result, m->pixclock);
+	needed_pixclk = (u32)div_result;
+
+	divider_int = clk_get_rate(fbi->clk) / needed_pixclk;
+
+	/* check whether divisor is too small. */
+	if (divider_int < 2) {
+		dev_warn(fbi->dev, "Warning: clock source is too slow."
+				"Try smaller resolution\n");
+		divider_int = 2;
+	}
+
+	/*
+	 * Set setting to reg.
+	 */
+	x |= divider_int;
+	writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV);
+}
+
+static void set_dma_control0(struct pxa168fb_info *fbi)
+{
+	u32 x;
+
+	/*
+	 * Set bit to enable graphics DMA.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
+	x |= fbi->active ? 0x00000100 : 0;
+	fbi->active = 0;
+
+	/*
+	 * If we are in a pseudo-color mode, we need to enable
+	 * palette lookup.
+	 */
+	if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
+		x |= 0x10000000;
+
+	/*
+	 * Configure hardware pixel format.
+	 */
+	x &= ~(0xF << 16);
+	x |= (fbi->pix_fmt >> 1) << 16;
+
+	/*
+	 * Check red and blue pixel swap.
+	 * 1. source data swap
+	 * 2. panel output data swap
+	 */
+	x &= ~(1 << 12);
+	x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12;
+
+	writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0);
+}
+
+static void set_dma_control1(struct pxa168fb_info *fbi, int sync)
+{
+	u32 x;
+
+	/*
+	 * Configure default bits: vsync triggers DMA, gated clock
+	 * enable, power save enable, configure alpha registers to
+	 * display 100% graphics, and set pixel command.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1);
+	x |= 0x2032ff81;
+
+	/*
+	 * We trigger DMA on the falling edge of vsync if vsync is
+	 * active low, or on the rising edge if vsync is active high.
+	 */
+	if (!(sync & FB_SYNC_VERT_HIGH_ACT))
+		x |= 0x08000000;
+
+	writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1);
+}
+
+static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	int pixel_offset;
+	unsigned long addr;
+
+	pixel_offset = (yoffset * var->xres_virtual) + xoffset;
+
+	addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3));
+	writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0);
+}
+
+static void set_dumb_panel_control(struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct pxa168fb_mach_info *mi = fbi->dev->platform_data;
+	u32 x;
+
+	/*
+	 * Preserve enable flag.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001;
+
+	x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28;
+	x |= mi->gpio_output_data << 20;
+	x |= mi->gpio_output_mask << 12;
+	x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0;
+	x |= mi->invert_composite_blank ? 0x00000040 : 0;
+	x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0;
+	x |= mi->invert_pix_val_ena ? 0x00000010 : 0;
+	x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008;
+	x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004;
+	x |= mi->invert_pixclock ? 0x00000002 : 0;
+
+	writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+}
+
+static void set_dumb_screen_dimensions(struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *v = &info->var;
+	int x;
+	int y;
+
+	x = v->xres + v->right_margin + v->hsync_len + v->left_margin;
+	y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin;
+
+	writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL);
+}
+
+static int pxa168fb_set_par(struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	struct fb_videomode mode;
+	u32 x;
+	struct pxa168fb_mach_info *mi;
+
+	mi = fbi->dev->platform_data;
+
+	/*
+	 * Set additional mode info.
+	 */
+	if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+	info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
+	info->fix.ypanstep = var->yres;
+
+	/*
+	 * Disable panel output while we setup the display.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
+	writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+
+	/*
+	 * Configure global panel parameters.
+	 */
+	writel((var->yres << 16) | var->xres,
+		fbi->reg_base + LCD_SPU_V_H_ACTIVE);
+
+	/*
+	 * convet var to video mode
+	 */
+	fb_var_to_videomode(&mode, &info->var);
+
+	/* Calculate clock divisor. */
+	set_clock_divider(fbi, &mode);
+
+	/* Configure dma ctrl regs. */
+	set_dma_control0(fbi);
+	set_dma_control1(fbi, info->var.sync);
+
+	/*
+	 * Configure graphics DMA parameters.
+	 */
+	x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH);
+	x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3);
+	writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH);
+	writel((var->yres << 16) | var->xres,
+		fbi->reg_base + LCD_SPU_GRA_HPXL_VLN);
+	writel((var->yres << 16) | var->xres,
+		fbi->reg_base + LCD_SPU_GZM_HPXL_VLN);
+
+	/*
+	 * Configure dumb panel ctrl regs & timings.
+	 */
+	set_dumb_panel_control(info);
+	set_dumb_screen_dimensions(info);
+
+	writel((var->left_margin << 16) | var->right_margin,
+			fbi->reg_base + LCD_SPU_H_PORCH);
+	writel((var->upper_margin << 16) | var->lower_margin,
+			fbi->reg_base + LCD_SPU_V_PORCH);
+
+	/*
+	 * Re-enable panel output.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
+	writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+
+	return 0;
+}
+
+static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+	return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset;
+}
+
+static u32 to_rgb(u16 red, u16 green, u16 blue)
+{
+	red >>= 8;
+	green >>= 8;
+	blue >>= 8;
+
+	return (red << 16) | (green << 8) | blue;
+}
+
+static int
+pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
+		 unsigned int blue, unsigned int trans, struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	u32 val;
+
+	if (info->var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green +
+					7471 * blue) >> 16;
+
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) {
+		val =  chan_to_field(red,   &info->var.red);
+		val |= chan_to_field(green, &info->var.green);
+		val |= chan_to_field(blue , &info->var.blue);
+		fbi->pseudo_palette[regno] = val;
+	}
+
+	if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
+		val = to_rgb(red, green, blue);
+		writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT);
+		writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL);
+	}
+
+	return 0;
+}
+
+static int pxa168fb_blank(int blank, struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+
+	fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1;
+	set_dumb_panel_control(info);
+
+	return 0;
+}
+
+static int pxa168fb_pan_display(struct fb_var_screeninfo *var,
+				struct fb_info *info)
+{
+	set_graphics_start(info, var->xoffset, var->yoffset);
+
+	return 0;
+}
+
+static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id)
+{
+	struct pxa168fb_info *fbi = dev_id;
+	u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR);
+
+	if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) {
+
+		writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK),
+			fbi->reg_base + SPU_IRQ_ISR);
+
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static struct fb_ops pxa168fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= pxa168fb_check_var,
+	.fb_set_par	= pxa168fb_set_par,
+	.fb_setcolreg	= pxa168fb_setcolreg,
+	.fb_blank	= pxa168fb_blank,
+	.fb_pan_display	= pxa168fb_pan_display,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static int __init pxa168fb_init_mode(struct fb_info *info,
+			      struct pxa168fb_mach_info *mi)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	int ret = 0;
+	u32 total_w, total_h, refresh;
+	u64 div_result;
+	const struct fb_videomode *m;
+
+	/*
+	 * Set default value
+	 */
+	refresh = DEFAULT_REFRESH;
+
+	/* try to find best video mode. */
+	m = fb_find_best_mode(&info->var, &info->modelist);
+	if (m)
+		fb_videomode_to_var(&info->var, m);
+
+	/* Init settings. */
+	var->xres_virtual = var->xres;
+	var->yres_virtual = info->fix.smem_len /
+		(var->xres_virtual * (var->bits_per_pixel >> 3));
+	dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n",
+				var->xres, var->yres);
+
+	/* correct pixclock. */
+	total_w = var->xres + var->left_margin + var->right_margin +
+		  var->hsync_len;
+	total_h = var->yres + var->upper_margin + var->lower_margin +
+		  var->vsync_len;
+
+	div_result = 1000000000000ll;
+	do_div(div_result, total_w * total_h * refresh);
+	var->pixclock = (u32)div_result;
+
+	return ret;
+}
+
+static int __init pxa168fb_probe(struct platform_device *pdev)
+{
+	struct pxa168fb_mach_info *mi;
+	struct fb_info *info = 0;
+	struct pxa168fb_info *fbi = 0;
+	struct resource *res;
+	struct clk *clk;
+	int irq, ret;
+
+	mi = pdev->dev.platform_data;
+	if (mi == NULL) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	clk = clk_get(&pdev->dev, "LCDCLK");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "unable to get LCDCLK");
+		return PTR_ERR(clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no IO memory defined\n");
+		return -ENOENT;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no IRQ defined\n");
+		return -ENOENT;
+	}
+
+	info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev);
+	if (info == NULL) {
+		clk_put(clk);
+		return -ENOMEM;
+	}
+
+	/* Initialize private data */
+	fbi = info->par;
+	fbi->info = info;
+	fbi->clk = clk;
+	fbi->dev = info->dev = &pdev->dev;
+	fbi->panel_rbswap = mi->panel_rbswap;
+	fbi->is_blanked = 0;
+	fbi->active = mi->active;
+
+	/*
+	 * Initialise static fb parameters.
+	 */
+	info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK |
+		      FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
+	info->node = -1;
+	strlcpy(info->fix.id, mi->id, 16);
+	info->fix.type = FB_TYPE_PACKED_PIXELS;
+	info->fix.type_aux = 0;
+	info->fix.xpanstep = 0;
+	info->fix.ypanstep = 0;
+	info->fix.ywrapstep = 0;
+	info->fix.mmio_start = res->start;
+	info->fix.mmio_len = res->end - res->start + 1;
+	info->fix.accel = FB_ACCEL_NONE;
+	info->fbops = &pxa168fb_ops;
+	info->pseudo_palette = fbi->pseudo_palette;
+
+	/*
+	 * Map LCD controller registers.
+	 */
+	fbi->reg_base = ioremap_nocache(res->start, res->end - res->start);
+	if (fbi->reg_base == NULL) {
+		ret = -ENOMEM;
+		goto failed;
+	}
+
+	/*
+	 * Allocate framebuffer memory.
+	 */
+	info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE);
+
+	info->screen_base = dma_alloc_writecombine(fbi->dev, info->fix.smem_len,
+						&fbi->fb_start_dma, GFP_KERNEL);
+	if (info->screen_base == NULL) {
+		ret = -ENOMEM;
+		goto failed;
+	}
+
+	info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
+
+	/*
+	 * Set video mode according to platform data.
+	 */
+	set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1);
+
+	fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist);
+
+	/*
+	 * init video mode data.
+	 */
+	pxa168fb_init_mode(info, mi);
+
+	ret = pxa168fb_check_var(&info->var, info);
+	if (ret)
+		goto failed_free_fbmem;
+
+	/*
+	 * Fill in sane defaults.
+	 */
+	ret = pxa168fb_check_var(&info->var, info);
+	if (ret)
+		goto failed;
+
+	/*
+	 * enable controller clock
+	 */
+	clk_enable(fbi->clk);
+
+	pxa168fb_set_par(info);
+
+	/*
+	 * Configure default register values.
+	 */
+	writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR);
+	writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL);
+	writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1);
+	writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN);
+	writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0);
+	writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1),
+		fbi->reg_base + LCD_SPU_SRAM_PARA1);
+
+	/*
+	 * Allocate color map.
+	 */
+	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+		ret = -ENOMEM;
+		goto failed_free_clk;
+	}
+
+	/*
+	 * Register irq handler.
+	 */
+	ret = request_irq(irq, pxa168fb_handle_irq, IRQF_SHARED,
+					info->fix.id, fbi);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to request IRQ\n");
+		ret = -ENXIO;
+		goto failed_free_cmap;
+	}
+
+	/*
+	 * Enable GFX interrupt
+	 */
+	writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA);
+
+	/*
+	 * Register framebuffer.
+	 */
+	ret = register_framebuffer(info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret);
+		ret = -ENXIO;
+		goto failed_free_irq;
+	}
+
+	platform_set_drvdata(pdev, fbi);
+	return 0;
+
+failed_free_irq:
+	free_irq(irq, fbi);
+failed_free_cmap:
+	fb_dealloc_cmap(&info->cmap);
+failed_free_clk:
+	clk_disable(fbi->clk);
+failed_free_fbmem:
+	dma_free_coherent(fbi->dev, info->fix.smem_len,
+			info->screen_base, fbi->fb_start_dma);
+failed:
+	kfree(info);
+	clk_put(clk);
+
+	dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret);
+	return ret;
+}
+
+static struct platform_driver pxa168fb_driver = {
+	.driver		= {
+		.name	= "pxa168-fb",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pxa168fb_probe,
+};
+
+static int __devinit pxa168fb_init(void)
+{
+	return platform_driver_register(&pxa168fb_driver);
+}
+module_init(pxa168fb_init);
+
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
+	      "Green Wan <gwan@marvell.com>");
+MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/pxa168fb.h b/drivers/video/pxa168fb.h
new file mode 100644
index 00000000000..eee09279c52
--- /dev/null
+++ b/drivers/video/pxa168fb.h
@@ -0,0 +1,558 @@
+#ifndef __PXA168FB_H__
+#define __PXA168FB_H__
+
+/* ------------< LCD register >------------ */
+/* Video Frame 0&1 start address registers */
+#define	LCD_SPU_DMA_START_ADDR_Y0		0x00C0
+#define	LCD_SPU_DMA_START_ADDR_U0		0x00C4
+#define	LCD_SPU_DMA_START_ADDR_V0		0x00C8
+#define LCD_CFG_DMA_START_ADDR_0		0x00CC /* Cmd address */
+#define	LCD_SPU_DMA_START_ADDR_Y1		0x00D0
+#define	LCD_SPU_DMA_START_ADDR_U1		0x00D4
+#define	LCD_SPU_DMA_START_ADDR_V1		0x00D8
+#define LCD_CFG_DMA_START_ADDR_1		0x00DC /* Cmd address */
+
+/* YC & UV Pitch */
+#define LCD_SPU_DMA_PITCH_YC			0x00E0
+#define     SPU_DMA_PITCH_C(c)			((c) << 16)
+#define     SPU_DMA_PITCH_Y(y)			(y)
+#define LCD_SPU_DMA_PITCH_UV			0x00E4
+#define     SPU_DMA_PITCH_V(v)			((v) << 16)
+#define     SPU_DMA_PITCH_U(u)			(u)
+
+/* Video Starting Point on Screen Register */
+#define LCD_SPUT_DMA_OVSA_HPXL_VLN		0x00E8
+#define     CFG_DMA_OVSA_VLN(y)			((y) << 16) /* 0~0xfff */
+#define     CFG_DMA_OVSA_HPXL(x)		(x)     /* 0~0xfff */
+
+/* Video Size Register */
+#define LCD_SPU_DMA_HPXL_VLN			0x00EC
+#define     CFG_DMA_VLN(y)			((y) << 16)
+#define     CFG_DMA_HPXL(x)			(x)
+
+/* Video Size After zooming Register */
+#define LCD_SPU_DZM_HPXL_VLN			0x00F0
+#define     CFG_DZM_VLN(y)			((y) << 16)
+#define     CFG_DZM_HPXL(x)			(x)
+
+/* Graphic Frame 0&1 Starting Address Register */
+#define LCD_CFG_GRA_START_ADDR0			0x00F4
+#define LCD_CFG_GRA_START_ADDR1			0x00F8
+
+/* Graphic Frame Pitch */
+#define LCD_CFG_GRA_PITCH			0x00FC
+
+/* Graphic Starting Point on Screen Register */
+#define LCD_SPU_GRA_OVSA_HPXL_VLN		0x0100
+#define     CFG_GRA_OVSA_VLN(y)			((y) << 16)
+#define     CFG_GRA_OVSA_HPXL(x)		(x)
+
+/* Graphic Size Register */
+#define LCD_SPU_GRA_HPXL_VLN			0x0104
+#define     CFG_GRA_VLN(y)			((y) << 16)
+#define     CFG_GRA_HPXL(x)			(x)
+
+/* Graphic Size after Zooming Register */
+#define LCD_SPU_GZM_HPXL_VLN			0x0108
+#define     CFG_GZM_VLN(y)			((y) << 16)
+#define     CFG_GZM_HPXL(x)			(x)
+
+/* HW Cursor Starting Point on Screen Register */
+#define LCD_SPU_HWC_OVSA_HPXL_VLN		0x010C
+#define     CFG_HWC_OVSA_VLN(y)			((y) << 16)
+#define     CFG_HWC_OVSA_HPXL(x)		(x)
+
+/* HW Cursor Size */
+#define LCD_SPU_HWC_HPXL_VLN			0x0110
+#define     CFG_HWC_VLN(y)			((y) << 16)
+#define     CFG_HWC_HPXL(x)			(x)
+
+/* Total Screen Size Register */
+#define LCD_SPUT_V_H_TOTAL			0x0114
+#define     CFG_V_TOTAL(y)			((y) << 16)
+#define     CFG_H_TOTAL(x)			(x)
+
+/* Total Screen Active Size Register */
+#define LCD_SPU_V_H_ACTIVE			0x0118
+#define     CFG_V_ACTIVE(y)			((y) << 16)
+#define     CFG_H_ACTIVE(x)			(x)
+
+/* Screen H&V Porch Register */
+#define LCD_SPU_H_PORCH				0x011C
+#define     CFG_H_BACK_PORCH(b)			((b) << 16)
+#define     CFG_H_FRONT_PORCH(f)		(f)
+#define LCD_SPU_V_PORCH				0x0120
+#define     CFG_V_BACK_PORCH(b)			((b) << 16)
+#define     CFG_V_FRONT_PORCH(f)		(f)
+
+/* Screen Blank Color Register */
+#define LCD_SPU_BLANKCOLOR			0x0124
+#define     CFG_BLANKCOLOR_MASK			0x00FFFFFF
+#define     CFG_BLANKCOLOR_R_MASK		0x000000FF
+#define     CFG_BLANKCOLOR_G_MASK		0x0000FF00
+#define     CFG_BLANKCOLOR_B_MASK		0x00FF0000
+
+/* HW Cursor Color 1&2 Register */
+#define LCD_SPU_ALPHA_COLOR1			0x0128
+#define     CFG_HWC_COLOR1			0x00FFFFFF
+#define     CFG_HWC_COLOR1_R(red)		((red) << 16)
+#define     CFG_HWC_COLOR1_G(green)		((green) << 8)
+#define     CFG_HWC_COLOR1_B(blue)		(blue)
+#define     CFG_HWC_COLOR1_R_MASK		0x000000FF
+#define     CFG_HWC_COLOR1_G_MASK		0x0000FF00
+#define     CFG_HWC_COLOR1_B_MASK		0x00FF0000
+#define LCD_SPU_ALPHA_COLOR2			0x012C
+#define     CFG_HWC_COLOR2			0x00FFFFFF
+#define     CFG_HWC_COLOR2_R_MASK		0x000000FF
+#define     CFG_HWC_COLOR2_G_MASK		0x0000FF00
+#define     CFG_HWC_COLOR2_B_MASK		0x00FF0000
+
+/* Video YUV Color Key Control */
+#define LCD_SPU_COLORKEY_Y			0x0130
+#define     CFG_CKEY_Y2(y2)			((y2) << 24)
+#define     CFG_CKEY_Y2_MASK			0xFF000000
+#define     CFG_CKEY_Y1(y1)			((y1) << 16)
+#define     CFG_CKEY_Y1_MASK			0x00FF0000
+#define     CFG_CKEY_Y(y)			((y) << 8)
+#define     CFG_CKEY_Y_MASK			0x0000FF00
+#define     CFG_ALPHA_Y(y)			(y)
+#define     CFG_ALPHA_Y_MASK			0x000000FF
+#define LCD_SPU_COLORKEY_U			0x0134
+#define     CFG_CKEY_U2(u2)			((u2) << 24)
+#define     CFG_CKEY_U2_MASK			0xFF000000
+#define     CFG_CKEY_U1(u1)			((u1) << 16)
+#define     CFG_CKEY_U1_MASK			0x00FF0000
+#define     CFG_CKEY_U(u)			((u) << 8)
+#define     CFG_CKEY_U_MASK			0x0000FF00
+#define     CFG_ALPHA_U(u)			(u)
+#define     CFG_ALPHA_U_MASK			0x000000FF
+#define LCD_SPU_COLORKEY_V			0x0138
+#define     CFG_CKEY_V2(v2)			((v2) << 24)
+#define     CFG_CKEY_V2_MASK			0xFF000000
+#define     CFG_CKEY_V1(v1)			((v1) << 16)
+#define     CFG_CKEY_V1_MASK			0x00FF0000
+#define     CFG_CKEY_V(v)			((v) << 8)
+#define     CFG_CKEY_V_MASK			0x0000FF00
+#define     CFG_ALPHA_V(v)			(v)
+#define     CFG_ALPHA_V_MASK			0x000000FF
+
+/* SPI Read Data Register */
+#define LCD_SPU_SPI_RXDATA			0x0140
+
+/* Smart Panel Read Data Register */
+#define LCD_SPU_ISA_RSDATA			0x0144
+#define     ISA_RXDATA_16BIT_1_DATA_MASK	0x000000FF
+#define     ISA_RXDATA_16BIT_2_DATA_MASK	0x0000FF00
+#define     ISA_RXDATA_16BIT_3_DATA_MASK	0x00FF0000
+#define     ISA_RXDATA_16BIT_4_DATA_MASK	0xFF000000
+#define     ISA_RXDATA_32BIT_1_DATA_MASK	0x00FFFFFF
+
+/* HWC SRAM Read Data Register */
+#define LCD_SPU_HWC_RDDAT			0x0158
+
+/* Gamma Table SRAM Read Data Register */
+#define LCD_SPU_GAMMA_RDDAT			0x015c
+#define     CFG_GAMMA_RDDAT_MASK		0x000000FF
+
+/* Palette Table SRAM Read Data Register */
+#define LCD_SPU_PALETTE_RDDAT			0x0160
+#define     CFG_PALETTE_RDDAT_MASK		0x00FFFFFF
+
+/* I/O Pads Input Read Only Register */
+#define LCD_SPU_IOPAD_IN			0x0178
+#define     CFG_IOPAD_IN_MASK			0x0FFFFFFF
+
+/* Reserved Read Only Registers */
+#define LCD_CFG_RDREG5F				0x017C
+#define     IRE_FRAME_CNT_MASK			0x000000C0
+#define     IPE_FRAME_CNT_MASK			0x00000030
+#define     GRA_FRAME_CNT_MASK			0x0000000C  /* Graphic */
+#define     DMA_FRAME_CNT_MASK			0x00000003  /* Video */
+
+/* SPI Control Register. */
+#define LCD_SPU_SPI_CTRL			0x0180
+#define     CFG_SCLKCNT(div)			((div) << 24)  /* 0xFF~0x2 */
+#define     CFG_SCLKCNT_MASK			0xFF000000
+#define     CFG_RXBITS(rx)			((rx) << 16)   /* 0x1F~0x1 */
+#define     CFG_RXBITS_MASK			0x00FF0000
+#define     CFG_TXBITS(tx)			((tx) << 8)    /* 0x1F~0x1 */
+#define     CFG_TXBITS_MASK			0x0000FF00
+#define     CFG_CLKINV(clk)			((clk) << 7)
+#define     CFG_CLKINV_MASK			0x00000080
+#define     CFG_KEEPXFER(transfer)		((transfer) << 6)
+#define     CFG_KEEPXFER_MASK			0x00000040
+#define     CFG_RXBITSTO0(rx)			((rx) << 5)
+#define     CFG_RXBITSTO0_MASK			0x00000020
+#define     CFG_TXBITSTO0(tx)			((tx) << 4)
+#define     CFG_TXBITSTO0_MASK			0x00000010
+#define     CFG_SPI_ENA(spi)			((spi) << 3)
+#define     CFG_SPI_ENA_MASK			0x00000008
+#define     CFG_SPI_SEL(spi)			((spi) << 2)
+#define     CFG_SPI_SEL_MASK			0x00000004
+#define     CFG_SPI_3W4WB(wire)			((wire) << 1)
+#define     CFG_SPI_3W4WB_MASK			0x00000002
+#define     CFG_SPI_START(start)		(start)
+#define     CFG_SPI_START_MASK			0x00000001
+
+/* SPI Tx Data Register */
+#define LCD_SPU_SPI_TXDATA			0x0184
+
+/*
+   1. Smart Pannel 8-bit Bus Control Register.
+   2. AHB Slave Path Data Port Register
+*/
+#define LCD_SPU_SMPN_CTRL			0x0188
+
+/* DMA Control 0 Register */
+#define LCD_SPU_DMA_CTRL0			0x0190
+#define     CFG_NOBLENDING(nb)			((nb) << 31)
+#define     CFG_NOBLENDING_MASK			0x80000000
+#define     CFG_GAMMA_ENA(gn)			((gn) << 30)
+#define     CFG_GAMMA_ENA_MASK			0x40000000
+#define     CFG_CBSH_ENA(cn)			((cn) << 29)
+#define     CFG_CBSH_ENA_MASK			0x20000000
+#define     CFG_PALETTE_ENA(pn)			((pn) << 28)
+#define     CFG_PALETTE_ENA_MASK		0x10000000
+#define     CFG_ARBFAST_ENA(an)			((an) << 27)
+#define     CFG_ARBFAST_ENA_MASK		0x08000000
+#define     CFG_HWC_1BITMOD(mode)		((mode) << 26)
+#define     CFG_HWC_1BITMOD_MASK		0x04000000
+#define     CFG_HWC_1BITENA(mn)			((mn) << 25)
+#define     CFG_HWC_1BITENA_MASK		0x02000000
+#define     CFG_HWC_ENA(cn)		        ((cn) << 24)
+#define     CFG_HWC_ENA_MASK			0x01000000
+#define     CFG_DMAFORMAT(dmaformat)		((dmaformat) << 20)
+#define     CFG_DMAFORMAT_MASK			0x00F00000
+#define     CFG_GRAFORMAT(graformat)		((graformat) << 16)
+#define     CFG_GRAFORMAT_MASK			0x000F0000
+/* for graphic part */
+#define     CFG_GRA_FTOGGLE(toggle)		((toggle) << 15)
+#define     CFG_GRA_FTOGGLE_MASK		0x00008000
+#define     CFG_GRA_HSMOOTH(smooth)		((smooth) << 14)
+#define     CFG_GRA_HSMOOTH_MASK		0x00004000
+#define     CFG_GRA_TSTMODE(test)		((test) << 13)
+#define     CFG_GRA_TSTMODE_MASK		0x00002000
+#define     CFG_GRA_SWAPRB(swap)		((swap) << 12)
+#define     CFG_GRA_SWAPRB_MASK			0x00001000
+#define     CFG_GRA_SWAPUV(swap)		((swap) << 11)
+#define     CFG_GRA_SWAPUV_MASK			0x00000800
+#define     CFG_GRA_SWAPYU(swap)		((swap) << 10)
+#define     CFG_GRA_SWAPYU_MASK			0x00000400
+#define     CFG_YUV2RGB_GRA(cvrt)		((cvrt) << 9)
+#define     CFG_YUV2RGB_GRA_MASK		0x00000200
+#define     CFG_GRA_ENA(gra)			((gra) << 8)
+#define     CFG_GRA_ENA_MASK			0x00000100
+/* for video part */
+#define     CFG_DMA_FTOGGLE(toggle)		((toggle) << 7)
+#define     CFG_DMA_FTOGGLE_MASK		0x00000080
+#define     CFG_DMA_HSMOOTH(smooth)		((smooth) << 6)
+#define     CFG_DMA_HSMOOTH_MASK		0x00000040
+#define     CFG_DMA_TSTMODE(test)		((test) << 5)
+#define     CFG_DMA_TSTMODE_MASK		0x00000020
+#define     CFG_DMA_SWAPRB(swap)		((swap) << 4)
+#define     CFG_DMA_SWAPRB_MASK			0x00000010
+#define     CFG_DMA_SWAPUV(swap)		((swap) << 3)
+#define     CFG_DMA_SWAPUV_MASK			0x00000008
+#define     CFG_DMA_SWAPYU(swap)		((swap) << 2)
+#define     CFG_DMA_SWAPYU_MASK			0x00000004
+#define     CFG_DMA_SWAP_MASK			0x0000001C
+#define     CFG_YUV2RGB_DMA(cvrt)		((cvrt) << 1)
+#define     CFG_YUV2RGB_DMA_MASK		0x00000002
+#define     CFG_DMA_ENA(video)			(video)
+#define     CFG_DMA_ENA_MASK			0x00000001
+
+/* DMA Control 1 Register */
+#define LCD_SPU_DMA_CTRL1			0x0194
+#define     CFG_FRAME_TRIG(trig)		((trig) << 31)
+#define     CFG_FRAME_TRIG_MASK			0x80000000
+#define     CFG_VSYNC_TRIG(trig)		((trig) << 28)
+#define     CFG_VSYNC_TRIG_MASK			0x70000000
+#define     CFG_VSYNC_INV(inv)			((inv) << 27)
+#define     CFG_VSYNC_INV_MASK			0x08000000
+#define     CFG_COLOR_KEY_MODE(cmode)		((cmode) << 24)
+#define     CFG_COLOR_KEY_MASK			0x07000000
+#define     CFG_CARRY(carry)			((carry) << 23)
+#define     CFG_CARRY_MASK			0x00800000
+#define     CFG_LNBUF_ENA(lnbuf)		((lnbuf) << 22)
+#define     CFG_LNBUF_ENA_MASK			0x00400000
+#define     CFG_GATED_ENA(gated)		((gated) << 21)
+#define     CFG_GATED_ENA_MASK			0x00200000
+#define     CFG_PWRDN_ENA(power)		((power) << 20)
+#define     CFG_PWRDN_ENA_MASK			0x00100000
+#define     CFG_DSCALE(dscale)			((dscale) << 18)
+#define     CFG_DSCALE_MASK			0x000C0000
+#define     CFG_ALPHA_MODE(amode)		((amode) << 16)
+#define     CFG_ALPHA_MODE_MASK			0x00030000
+#define     CFG_ALPHA(alpha)			((alpha) << 8)
+#define     CFG_ALPHA_MASK			0x0000FF00
+#define     CFG_PXLCMD(pxlcmd)			(pxlcmd)
+#define     CFG_PXLCMD_MASK			0x000000FF
+
+/* SRAM Control Register */
+#define LCD_SPU_SRAM_CTRL			0x0198
+#define     CFG_SRAM_INIT_WR_RD(mode)		((mode) << 14)
+#define     CFG_SRAM_INIT_WR_RD_MASK		0x0000C000
+#define     CFG_SRAM_ADDR_LCDID(id)		((id) << 8)
+#define     CFG_SRAM_ADDR_LCDID_MASK		0x00000F00
+#define     CFG_SRAM_ADDR(addr)			(addr)
+#define     CFG_SRAM_ADDR_MASK			0x000000FF
+
+/* SRAM Write Data Register */
+#define LCD_SPU_SRAM_WRDAT			0x019C
+
+/* SRAM RTC/WTC Control Register */
+#define LCD_SPU_SRAM_PARA0			0x01A0
+
+/* SRAM Power Down Control Register */
+#define LCD_SPU_SRAM_PARA1			0x01A4
+#define     CFG_CSB_256x32(hwc)			((hwc) << 15)	/* HWC */
+#define     CFG_CSB_256x32_MASK			0x00008000
+#define     CFG_CSB_256x24(palette)		((palette) << 14)	/* Palette */
+#define     CFG_CSB_256x24_MASK			0x00004000
+#define     CFG_CSB_256x8(gamma)		((gamma) << 13)	/* Gamma */
+#define     CFG_CSB_256x8_MASK			0x00002000
+#define     CFG_PDWN256x32(pdwn)		((pdwn) << 7)	/* HWC */
+#define     CFG_PDWN256x32_MASK			0x00000080
+#define     CFG_PDWN256x24(pdwn)		((pdwn) << 6)	/* Palette */
+#define     CFG_PDWN256x24_MASK			0x00000040
+#define     CFG_PDWN256x8(pdwn)			((pdwn) << 5)	/* Gamma */
+#define     CFG_PDWN256x8_MASK			0x00000020
+#define     CFG_PDWN32x32(pdwn)			((pdwn) << 3)
+#define     CFG_PDWN32x32_MASK			0x00000008
+#define     CFG_PDWN16x66(pdwn)			((pdwn) << 2)
+#define     CFG_PDWN16x66_MASK			0x00000004
+#define     CFG_PDWN32x66(pdwn)			((pdwn) << 1)
+#define     CFG_PDWN32x66_MASK			0x00000002
+#define     CFG_PDWN64x66(pdwn)			(pdwn)
+#define     CFG_PDWN64x66_MASK			0x00000001
+
+/* Smart or Dumb Panel Clock Divider */
+#define LCD_CFG_SCLK_DIV			0x01A8
+#define     SCLK_SOURCE_SELECT(src)		((src) << 31)
+#define     SCLK_SOURCE_SELECT_MASK		0x80000000
+#define     CLK_FRACDIV(frac)			((frac) << 16)
+#define     CLK_FRACDIV_MASK			0x0FFF0000
+#define     CLK_INT_DIV(div)			(div)
+#define     CLK_INT_DIV_MASK			0x0000FFFF
+
+/* Video Contrast Register */
+#define LCD_SPU_CONTRAST			0x01AC
+#define     CFG_BRIGHTNESS(bright)		((bright) << 16)
+#define     CFG_BRIGHTNESS_MASK			0xFFFF0000
+#define     CFG_CONTRAST(contrast)		(contrast)
+#define     CFG_CONTRAST_MASK			0x0000FFFF
+
+/* Video Saturation Register */
+#define LCD_SPU_SATURATION			0x01B0
+#define     CFG_C_MULTS(mult)			((mult) << 16)
+#define     CFG_C_MULTS_MASK			0xFFFF0000
+#define     CFG_SATURATION(sat)			(sat)
+#define     CFG_SATURATION_MASK			0x0000FFFF
+
+/* Video Hue Adjust Register */
+#define LCD_SPU_CBSH_HUE			0x01B4
+#define     CFG_SIN0(sin0)			((sin0) << 16)
+#define     CFG_SIN0_MASK			0xFFFF0000
+#define     CFG_COS0(con0)			(con0)
+#define     CFG_COS0_MASK			0x0000FFFF
+
+/* Dump LCD Panel Control Register */
+#define LCD_SPU_DUMB_CTRL			0x01B8
+#define     CFG_DUMBMODE(mode)			((mode) << 28)
+#define     CFG_DUMBMODE_MASK			0xF0000000
+#define     CFG_LCDGPIO_O(data)			((data) << 20)
+#define     CFG_LCDGPIO_O_MASK			0x0FF00000
+#define     CFG_LCDGPIO_ENA(gpio)		((gpio) << 12)
+#define     CFG_LCDGPIO_ENA_MASK		0x000FF000
+#define     CFG_BIAS_OUT(bias)			((bias) << 8)
+#define     CFG_BIAS_OUT_MASK			0x00000100
+#define     CFG_REVERSE_RGB(rRGB)		((rRGB) << 7)
+#define     CFG_REVERSE_RGB_MASK		0x00000080
+#define     CFG_INV_COMPBLANK(blank)		((blank) << 6)
+#define     CFG_INV_COMPBLANK_MASK		0x00000040
+#define     CFG_INV_COMPSYNC(sync)		((sync) << 5)
+#define     CFG_INV_COMPSYNC_MASK		0x00000020
+#define     CFG_INV_HENA(hena)			((hena) << 4)
+#define     CFG_INV_HENA_MASK			0x00000010
+#define     CFG_INV_VSYNC(vsync)		((vsync) << 3)
+#define     CFG_INV_VSYNC_MASK			0x00000008
+#define     CFG_INV_HSYNC(hsync)		((hsync) << 2)
+#define     CFG_INV_HSYNC_MASK			0x00000004
+#define     CFG_INV_PCLK(pclk)			((pclk) << 1)
+#define     CFG_INV_PCLK_MASK			0x00000002
+#define     CFG_DUMB_ENA(dumb)			(dumb)
+#define     CFG_DUMB_ENA_MASK			0x00000001
+
+/* LCD I/O Pads Control Register */
+#define SPU_IOPAD_CONTROL			0x01BC
+#define     CFG_GRA_VM_ENA(vm)			((vm) << 15)        /* gfx */
+#define     CFG_GRA_VM_ENA_MASK			0x00008000
+#define     CFG_DMA_VM_ENA(vm)			((vm) << 13)	/* video */
+#define     CFG_DMA_VM_ENA_MASK			0x00002000
+#define     CFG_CMD_VM_ENA(vm)			((vm) << 13)
+#define     CFG_CMD_VM_ENA_MASK			0x00000800
+#define     CFG_CSC(csc)			((csc) << 8)	/* csc */
+#define     CFG_CSC_MASK			0x00000300
+#define     CFG_AXICTRL(axi)			((axi) << 4)
+#define     CFG_AXICTRL_MASK			0x000000F0
+#define     CFG_IOPADMODE(iopad)		(iopad)
+#define     CFG_IOPADMODE_MASK			0x0000000F
+
+/* LCD Interrupt Control Register */
+#define SPU_IRQ_ENA				0x01C0
+#define     DMA_FRAME_IRQ0_ENA(irq)		((irq) << 31)
+#define     DMA_FRAME_IRQ0_ENA_MASK		0x80000000
+#define     DMA_FRAME_IRQ1_ENA(irq)		((irq) << 30)
+#define     DMA_FRAME_IRQ1_ENA_MASK		0x40000000
+#define     DMA_FF_UNDERFLOW_ENA(ff)		((ff) << 29)
+#define     DMA_FF_UNDERFLOW_ENA_MASK		0x20000000
+#define     GRA_FRAME_IRQ0_ENA(irq)		((irq) << 27)
+#define     GRA_FRAME_IRQ0_ENA_MASK		0x08000000
+#define     GRA_FRAME_IRQ1_ENA(irq)		((irq) << 26)
+#define     GRA_FRAME_IRQ1_ENA_MASK		0x04000000
+#define     GRA_FF_UNDERFLOW_ENA(ff)		((ff) << 25)
+#define     GRA_FF_UNDERFLOW_ENA_MASK		0x02000000
+#define     VSYNC_IRQ_ENA(vsync_irq)		((vsync_irq) << 23)
+#define     VSYNC_IRQ_ENA_MASK			0x00800000
+#define     DUMB_FRAMEDONE_ENA(fdone)		((fdone) << 22)
+#define     DUMB_FRAMEDONE_ENA_MASK		0x00400000
+#define     TWC_FRAMEDONE_ENA(fdone)		((fdone) << 21)
+#define     TWC_FRAMEDONE_ENA_MASK		0x00200000
+#define     HWC_FRAMEDONE_ENA(fdone)		((fdone) << 20)
+#define     HWC_FRAMEDONE_ENA_MASK		0x00100000
+#define     SLV_IRQ_ENA(irq)			((irq) << 19)
+#define     SLV_IRQ_ENA_MASK			0x00080000
+#define     SPI_IRQ_ENA(irq)			((irq) << 18)
+#define     SPI_IRQ_ENA_MASK			0x00040000
+#define     PWRDN_IRQ_ENA(irq)			((irq) << 17)
+#define     PWRDN_IRQ_ENA_MASK			0x00020000
+#define     ERR_IRQ_ENA(irq)			((irq) << 16)
+#define     ERR_IRQ_ENA_MASK			0x00010000
+#define     CLEAN_SPU_IRQ_ISR(irq)		(irq)
+#define     CLEAN_SPU_IRQ_ISR_MASK		0x0000FFFF
+
+/* LCD Interrupt Status Register */
+#define SPU_IRQ_ISR				0x01C4
+#define     DMA_FRAME_IRQ0(irq)			((irq) << 31)
+#define     DMA_FRAME_IRQ0_MASK			0x80000000
+#define     DMA_FRAME_IRQ1(irq)			((irq) << 30)
+#define     DMA_FRAME_IRQ1_MASK			0x40000000
+#define     DMA_FF_UNDERFLOW(ff)		((ff) << 29)
+#define     DMA_FF_UNDERFLOW_MASK		0x20000000
+#define     GRA_FRAME_IRQ0(irq)			((irq) << 27)
+#define     GRA_FRAME_IRQ0_MASK			0x08000000
+#define     GRA_FRAME_IRQ1(irq)			((irq) << 26)
+#define     GRA_FRAME_IRQ1_MASK			0x04000000
+#define     GRA_FF_UNDERFLOW(ff)		((ff) << 25)
+#define     GRA_FF_UNDERFLOW_MASK		0x02000000
+#define     VSYNC_IRQ(vsync_irq)		((vsync_irq) << 23)
+#define     VSYNC_IRQ_MASK			0x00800000
+#define     DUMB_FRAMEDONE(fdone)		((fdone) << 22)
+#define     DUMB_FRAMEDONE_MASK			0x00400000
+#define     TWC_FRAMEDONE(fdone)		((fdone) << 21)
+#define     TWC_FRAMEDONE_MASK			0x00200000
+#define     HWC_FRAMEDONE(fdone)		((fdone) << 20)
+#define     HWC_FRAMEDONE_MASK			0x00100000
+#define     SLV_IRQ(irq)			((irq) << 19)
+#define     SLV_IRQ_MASK			0x00080000
+#define     SPI_IRQ(irq)			((irq) << 18)
+#define     SPI_IRQ_MASK			0x00040000
+#define     PWRDN_IRQ(irq)			((irq) << 17)
+#define     PWRDN_IRQ_MASK			0x00020000
+#define     ERR_IRQ(irq)			((irq) << 16)
+#define     ERR_IRQ_MASK			0x00010000
+/* read-only */
+#define     DMA_FRAME_IRQ0_LEVEL_MASK		0x00008000
+#define     DMA_FRAME_IRQ1_LEVEL_MASK		0x00004000
+#define     DMA_FRAME_CNT_ISR_MASK		0x00003000
+#define     GRA_FRAME_IRQ0_LEVEL_MASK		0x00000800
+#define     GRA_FRAME_IRQ1_LEVEL_MASK		0x00000400
+#define     GRA_FRAME_CNT_ISR_MASK		0x00000300
+#define     VSYNC_IRQ_LEVEL_MASK		0x00000080
+#define     DUMB_FRAMEDONE_LEVEL_MASK		0x00000040
+#define     TWC_FRAMEDONE_LEVEL_MASK		0x00000020
+#define     HWC_FRAMEDONE_LEVEL_MASK		0x00000010
+#define     SLV_FF_EMPTY_MASK			0x00000008
+#define     DMA_FF_ALLEMPTY_MASK		0x00000004
+#define     GRA_FF_ALLEMPTY_MASK		0x00000002
+#define     PWRDN_IRQ_LEVEL_MASK		0x00000001
+
+
+/*
+ * defined Video Memory Color format for DMA control 0 register
+ * DMA0 bit[23:20]
+ */
+#define VMODE_RGB565		0x0
+#define VMODE_RGB1555		0x1
+#define VMODE_RGB888PACKED	0x2
+#define VMODE_RGB888UNPACKED	0x3
+#define VMODE_RGBA888		0x4
+#define VMODE_YUV422PACKED	0x5
+#define VMODE_YUV422PLANAR	0x6
+#define VMODE_YUV420PLANAR	0x7
+#define VMODE_SMPNCMD		0x8
+#define VMODE_PALETTE4BIT	0x9
+#define VMODE_PALETTE8BIT	0xa
+#define VMODE_RESERVED		0xb
+
+/*
+ * defined Graphic Memory Color format for DMA control 0 register
+ * DMA0 bit[19:16]
+ */
+#define GMODE_RGB565		0x0
+#define GMODE_RGB1555		0x1
+#define GMODE_RGB888PACKED	0x2
+#define GMODE_RGB888UNPACKED	0x3
+#define GMODE_RGBA888		0x4
+#define GMODE_YUV422PACKED	0x5
+#define GMODE_YUV422PLANAR	0x6
+#define GMODE_YUV420PLANAR	0x7
+#define GMODE_SMPNCMD		0x8
+#define GMODE_PALETTE4BIT	0x9
+#define GMODE_PALETTE8BIT	0xa
+#define GMODE_RESERVED		0xb
+
+/*
+ * define for DMA control 1 register
+ */
+#define DMA1_FRAME_TRIG		31 /* bit location */
+#define DMA1_VSYNC_MODE		28
+#define DMA1_VSYNC_INV		27
+#define DMA1_CKEY		24
+#define DMA1_CARRY		23
+#define DMA1_LNBUF_ENA		22
+#define DMA1_GATED_ENA		21
+#define DMA1_PWRDN_ENA		20
+#define DMA1_DSCALE		18
+#define DMA1_ALPHA_MODE		16
+#define DMA1_ALPHA		08
+#define DMA1_PXLCMD		00
+
+/*
+ * defined for Configure Dumb Mode
+ * DUMB LCD Panel bit[31:28]
+ */
+#define DUMB16_RGB565_0		0x0
+#define DUMB16_RGB565_1		0x1
+#define DUMB18_RGB666_0		0x2
+#define DUMB18_RGB666_1		0x3
+#define DUMB12_RGB444_0		0x4
+#define DUMB12_RGB444_1		0x5
+#define DUMB24_RGB888_0		0x6
+#define DUMB_BLANK		0x7
+
+/*
+ * defined for Configure I/O Pin Allocation Mode
+ * LCD LCD I/O Pads control register bit[3:0]
+ */
+#define IOPAD_DUMB24		0x0
+#define IOPAD_DUMB18SPI		0x1
+#define IOPAD_DUMB18GPIO	0x2
+#define IOPAD_DUMB16SPI		0x3
+#define IOPAD_DUMB16GPIO	0x4
+#define IOPAD_DUMB12		0x5
+#define IOPAD_SMART18SPI	0x6
+#define IOPAD_SMART16SPI	0x7
+#define IOPAD_SMART8BOTH	0x8
+
+#endif /* __PXA168FB_H__ */
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 9adbb4f9047..fd2c7bd9dfb 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -8,7 +8,7 @@ menuconfig W1
 	  If you want W1 support, you should say Y here.
 
 	  This W1 support can also be built as a module.  If so, the module
-	  will be called wire.ko.
+	  will be called wire.
 
 if W1
 
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 96d2f8e4c27..3195fb8b7d9 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -12,7 +12,7 @@ config W1_MASTER_MATROX
 	  using Matrox's G400 GPIO pins.
 
 	  This support is also available as a module.  If so, the module
-	  will be called matrox_w1.ko.
+	  will be called matrox_w1.
 
 config W1_MASTER_DS2490
 	tristate "DS2490 USB <-> W1 transport layer for 1-wire"
@@ -22,7 +22,7 @@ config W1_MASTER_DS2490
 	  for example DS9490*.
 
   	  This support is also available as a module.  If so, the module
-	  will be called ds2490.ko.
+	  will be called ds2490.
 
 config W1_MASTER_DS2482
 	tristate "Maxim DS2482 I2C to 1-Wire bridge"
@@ -56,7 +56,7 @@ config W1_MASTER_GPIO
 	  GPIO pins. This driver uses the GPIO API to control the wire.
 
 	  This support is also available as a module.  If so, the module
-	  will be called w1-gpio.ko.
+	  will be called w1-gpio.
 
 config HDQ_MASTER_OMAP
 	tristate "OMAP HDQ driver"
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 5eb8f21da82..b166f2852a6 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -231,14 +231,14 @@ config DAVINCI_WATCHDOG
 	  NOTE: once enabled, this timer cannot be disabled.
 	  Say N if you are unsure.
 
-config ORION5X_WATCHDOG
-	tristate "Orion5x watchdog"
-	depends on ARCH_ORION5X
+config ORION_WATCHDOG
+	tristate "Orion watchdog"
+	depends on ARCH_ORION5X || ARCH_KIRKWOOD
 	help
 	  Say Y here if to include support for the watchdog timer
-	  in the Orion5x ARM SoCs.
+	  in the Marvell Orion5x and Kirkwood ARM SoCs.
 	  To compile this driver as a module, choose M here: the
-	  module will be called orion5x_wdt.
+	  module will be called orion_wdt.
 
 # AVR32 Architecture
 
@@ -531,7 +531,7 @@ config SBC8360_WDT
 	  Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called sbc8360.ko.
+	  module will be called sbc8360.
 
 	  Most people will say N.
 
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 7f8c56b14f5..c3afa14d5be 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -40,7 +40,7 @@ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
 obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
 obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
 obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
-obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o
+obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c
index 96eb2cbe587..0c905967669 100644
--- a/drivers/watchdog/iop_wdt.c
+++ b/drivers/watchdog/iop_wdt.c
@@ -192,7 +192,7 @@ static int iop_wdt_release(struct inode *inode, struct file *file)
 		if (test_bit(WDT_ENABLED, &wdt_status))
 			state = wdt_disable();
 
-	/* if the timer is not disbaled reload and notify that we are still
+	/* if the timer is not disabled reload and notify that we are still
 	 * going down
 	 */
 	if (state != 0) {
diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion_wdt.c
index 2cde568e4fb..2d9fb96a9ee 100644
--- a/drivers/watchdog/orion5x_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -1,7 +1,7 @@
 /*
- * drivers/watchdog/orion5x_wdt.c
+ * drivers/watchdog/orion_wdt.c
  *
- * Watchdog driver for Orion5x processors
+ * Watchdog driver for Orion/Kirkwood processors
  *
  * Author: Sylver Bruneau <sylver.bruneau@googlemail.com>
  *
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <mach/bridge-regs.h>
-#include <plat/orion5x_wdt.h>
+#include <plat/orion_wdt.h>
 
 /*
  * Watchdog timer block registers.
@@ -43,7 +43,7 @@ static unsigned int wdt_tclk;
 static unsigned long wdt_status;
 static spinlock_t wdt_lock;
 
-static void orion5x_wdt_ping(void)
+static void orion_wdt_ping(void)
 {
 	spin_lock(&wdt_lock);
 
@@ -53,7 +53,7 @@ static void orion5x_wdt_ping(void)
 	spin_unlock(&wdt_lock);
 }
 
-static void orion5x_wdt_enable(void)
+static void orion_wdt_enable(void)
 {
 	u32 reg;
 
@@ -73,23 +73,23 @@ static void orion5x_wdt_enable(void)
 	writel(reg, TIMER_CTRL);
 
 	/* Enable reset on watchdog */
-	reg = readl(CPU_RESET_MASK);
-	reg |= WDT_RESET;
-	writel(reg, CPU_RESET_MASK);
+	reg = readl(RSTOUTn_MASK);
+	reg |= WDT_RESET_OUT_EN;
+	writel(reg, RSTOUTn_MASK);
 
 	spin_unlock(&wdt_lock);
 }
 
-static void orion5x_wdt_disable(void)
+static void orion_wdt_disable(void)
 {
 	u32 reg;
 
 	spin_lock(&wdt_lock);
 
 	/* Disable reset on watchdog */
-	reg = readl(CPU_RESET_MASK);
-	reg &= ~WDT_RESET;
-	writel(reg, CPU_RESET_MASK);
+	reg = readl(RSTOUTn_MASK);
+	reg &= ~WDT_RESET_OUT_EN;
+	writel(reg, RSTOUTn_MASK);
 
 	/* Disable watchdog timer */
 	reg = readl(TIMER_CTRL);
@@ -99,7 +99,7 @@ static void orion5x_wdt_disable(void)
 	spin_unlock(&wdt_lock);
 }
 
-static int orion5x_wdt_get_timeleft(int *time_left)
+static int orion_wdt_get_timeleft(int *time_left)
 {
 	spin_lock(&wdt_lock);
 	*time_left = readl(WDT_VAL) / wdt_tclk;
@@ -107,16 +107,16 @@ static int orion5x_wdt_get_timeleft(int *time_left)
 	return 0;
 }
 
-static int orion5x_wdt_open(struct inode *inode, struct file *file)
+static int orion_wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
 		return -EBUSY;
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-	orion5x_wdt_enable();
+	orion_wdt_enable();
 	return nonseekable_open(inode, file);
 }
 
-static ssize_t orion5x_wdt_write(struct file *file, const char *data,
+static ssize_t orion_wdt_write(struct file *file, const char *data,
 					size_t len, loff_t *ppos)
 {
 	if (len) {
@@ -133,18 +133,18 @@ static ssize_t orion5x_wdt_write(struct file *file, const char *data,
 					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
 			}
 		}
-		orion5x_wdt_ping();
+		orion_wdt_ping();
 	}
 	return len;
 }
 
-static int orion5x_wdt_settimeout(int new_time)
+static int orion_wdt_settimeout(int new_time)
 {
 	if ((new_time <= 0) || (new_time > wdt_max_duration))
 		return -EINVAL;
 
 	/* Set new watchdog time to be used when
-	 * orion5x_wdt_enable() or orion5x_wdt_ping() is called. */
+	 * orion_wdt_enable() or orion_wdt_ping() is called. */
 	heartbeat = new_time;
 	return 0;
 }
@@ -152,10 +152,10 @@ static int orion5x_wdt_settimeout(int new_time)
 static const struct watchdog_info ident = {
 	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
 			  WDIOF_KEEPALIVEPING,
-	.identity	= "Orion5x Watchdog",
+	.identity	= "Orion Watchdog",
 };
 
-static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
+static long orion_wdt_ioctl(struct file *file, unsigned int cmd,
 				unsigned long arg)
 {
 	int ret = -ENOTTY;
@@ -173,7 +173,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case WDIOC_KEEPALIVE:
-		orion5x_wdt_ping();
+		orion_wdt_ping();
 		ret = 0;
 		break;
 
@@ -182,11 +182,11 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 		if (ret)
 			break;
 
-		if (orion5x_wdt_settimeout(time)) {
+		if (orion_wdt_settimeout(time)) {
 			ret = -EINVAL;
 			break;
 		}
-		orion5x_wdt_ping();
+		orion_wdt_ping();
 		/* Fall through */
 
 	case WDIOC_GETTIMEOUT:
@@ -194,7 +194,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case WDIOC_GETTIMELEFT:
-		if (orion5x_wdt_get_timeleft(&time)) {
+		if (orion_wdt_get_timeleft(&time)) {
 			ret = -EINVAL;
 			break;
 		}
@@ -204,10 +204,10 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 	return ret;
 }
 
-static int orion5x_wdt_release(struct inode *inode, struct file *file)
+static int orion_wdt_release(struct inode *inode, struct file *file)
 {
 	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
-		orion5x_wdt_disable();
+		orion_wdt_disable();
 	else
 		printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
 					"timer will not stop\n");
@@ -218,98 +218,98 @@ static int orion5x_wdt_release(struct inode *inode, struct file *file)
 }
 
 
-static const struct file_operations orion5x_wdt_fops = {
+static const struct file_operations orion_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.write		= orion5x_wdt_write,
-	.unlocked_ioctl	= orion5x_wdt_ioctl,
-	.open		= orion5x_wdt_open,
-	.release	= orion5x_wdt_release,
+	.write		= orion_wdt_write,
+	.unlocked_ioctl	= orion_wdt_ioctl,
+	.open		= orion_wdt_open,
+	.release	= orion_wdt_release,
 };
 
-static struct miscdevice orion5x_wdt_miscdev = {
+static struct miscdevice orion_wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
-	.fops		= &orion5x_wdt_fops,
+	.fops		= &orion_wdt_fops,
 };
 
-static int __devinit orion5x_wdt_probe(struct platform_device *pdev)
+static int __devinit orion_wdt_probe(struct platform_device *pdev)
 {
-	struct orion5x_wdt_platform_data *pdata = pdev->dev.platform_data;
+	struct orion_wdt_platform_data *pdata = pdev->dev.platform_data;
 	int ret;
 
 	if (pdata) {
 		wdt_tclk = pdata->tclk;
 	} else {
-		printk(KERN_ERR "Orion5x Watchdog misses platform data\n");
+		printk(KERN_ERR "Orion Watchdog misses platform data\n");
 		return -ENODEV;
 	}
 
-	if (orion5x_wdt_miscdev.parent)
+	if (orion_wdt_miscdev.parent)
 		return -EBUSY;
-	orion5x_wdt_miscdev.parent = &pdev->dev;
+	orion_wdt_miscdev.parent = &pdev->dev;
 
 	wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
-	if (orion5x_wdt_settimeout(heartbeat))
+	if (orion_wdt_settimeout(heartbeat))
 		heartbeat = wdt_max_duration;
 
-	ret = misc_register(&orion5x_wdt_miscdev);
+	ret = misc_register(&orion_wdt_miscdev);
 	if (ret)
 		return ret;
 
-	printk(KERN_INFO "Orion5x Watchdog Timer: Initial timeout %d sec%s\n",
+	printk(KERN_INFO "Orion Watchdog Timer: Initial timeout %d sec%s\n",
 				heartbeat, nowayout ? ", nowayout" : "");
 	return 0;
 }
 
-static int __devexit orion5x_wdt_remove(struct platform_device *pdev)
+static int __devexit orion_wdt_remove(struct platform_device *pdev)
 {
 	int ret;
 
 	if (test_bit(WDT_IN_USE, &wdt_status)) {
-		orion5x_wdt_disable();
+		orion_wdt_disable();
 		clear_bit(WDT_IN_USE, &wdt_status);
 	}
 
-	ret = misc_deregister(&orion5x_wdt_miscdev);
+	ret = misc_deregister(&orion_wdt_miscdev);
 	if (!ret)
-		orion5x_wdt_miscdev.parent = NULL;
+		orion_wdt_miscdev.parent = NULL;
 
 	return ret;
 }
 
-static void orion5x_wdt_shutdown(struct platform_device *pdev)
+static void orion_wdt_shutdown(struct platform_device *pdev)
 {
 	if (test_bit(WDT_IN_USE, &wdt_status))
-		orion5x_wdt_disable();
+		orion_wdt_disable();
 }
 
-static struct platform_driver orion5x_wdt_driver = {
-	.probe		= orion5x_wdt_probe,
-	.remove		= __devexit_p(orion5x_wdt_remove),
-	.shutdown	= orion5x_wdt_shutdown,
+static struct platform_driver orion_wdt_driver = {
+	.probe		= orion_wdt_probe,
+	.remove		= __devexit_p(orion_wdt_remove),
+	.shutdown	= orion_wdt_shutdown,
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= "orion5x_wdt",
+		.name	= "orion_wdt",
 	},
 };
 
-static int __init orion5x_wdt_init(void)
+static int __init orion_wdt_init(void)
 {
 	spin_lock_init(&wdt_lock);
-	return platform_driver_register(&orion5x_wdt_driver);
+	return platform_driver_register(&orion_wdt_driver);
 }
 
-static void __exit orion5x_wdt_exit(void)
+static void __exit orion_wdt_exit(void)
 {
-	platform_driver_unregister(&orion5x_wdt_driver);
+	platform_driver_unregister(&orion_wdt_driver);
 }
 
-module_init(orion5x_wdt_init);
-module_exit(orion5x_wdt_exit);
+module_init(orion_wdt_init);
+module_exit(orion_wdt_exit);
 
 MODULE_AUTHOR("Sylver Bruneau <sylver.bruneau@googlemail.com>");
-MODULE_DESCRIPTION("Orion5x Processor Watchdog");
+MODULE_DESCRIPTION("Orion Processor Watchdog");
 
 module_param(heartbeat, int, 0);
 MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
diff --git a/fs/bio.c b/fs/bio.c
index 59000215e59..5f80848c320 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -358,9 +358,9 @@ static void bio_kmalloc_destructor(struct bio *bio)
  *
  *   If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
  *   a bio. This is due to the mempool guarantees. To make this work, callers
- *   must never allocate more than 1 bio at the time from this pool. Callers
+ *   must never allocate more than 1 bio at a time from this pool. Callers
  *   that need to allocate more than 1 bio must always submit the previously
- *   allocate bio for IO before attempting to allocate a new one. Failure to
+ *   allocated bio for IO before attempting to allocate a new one. Failure to
  *   do so can cause livelocks under memory pressure.
  *
  **/
diff --git a/fs/compat.c b/fs/compat.c
index 6aefb776dfe..cdd51a3a7c5 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -471,7 +471,7 @@ asmlinkage long compat_sys_fcntl64(unsigned int fd, unsigned int cmd,
 		ret = sys_fcntl(fd, cmd, (unsigned long)&f);
 		set_fs(old_fs);
 		if (cmd == F_GETLK && ret == 0) {
-			/* GETLK was successfule and we need to return the data...
+			/* GETLK was successful and we need to return the data...
 			 * but it needs to fit in the compat structure.
 			 * l_start shouldn't be too big, unless the original
 			 * start + end is greater than COMPAT_OFF_T_MAX, in which
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index b83f6bcfa51..0aac371bff0 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -1765,7 +1765,7 @@ static int do_i2c_smbus_ioctl(unsigned int fd, unsigned int cmd, unsigned long a
 
 /* Since old style bridge ioctl's endup using SIOCDEVPRIVATE
  * for some operations; this forces use of the newer bridge-utils that
- * use compatiable ioctls
+ * use compatible ioctls
  */
 static int old_bridge_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
 {
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index b2bbf45039e..f2e5811936d 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -27,7 +27,7 @@ struct ext2_inode_info {
 	/*
 	 * i_block_group is the number of the block group which contains
 	 * this file's inode.  Constant across the lifetime of the inode,
-	 * it is ued for making block allocation decisions - we try to
+	 * it is used for making block allocation decisions - we try to
 	 * place a file's data blocks near its inode block, and new inodes
 	 * near to their parent directory's inode.
 	 */
diff --git a/fs/inode.c b/fs/inode.c
index a88baebf77c..f643be565df 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1408,7 +1408,7 @@ EXPORT_SYMBOL(touch_atime);
  *	for writeback.  Note that this function is meant exclusively for
  *	usage in the file write path of filesystems, and filesystems may
  *	choose to explicitly ignore update via this function with the
- *	S_NOCTIME inode flag, e.g. for network filesystem where these
+ *	S_NOCMTIME inode flag, e.g. for network filesystem where these
  *	timestamps are handled by the server.
  */
 
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
new file mode 100644
index 00000000000..dcad0ffd175
--- /dev/null
+++ b/include/linux/amba/pl022.h
@@ -0,0 +1,264 @@
+/*
+ * include/linux/amba/pl022.h
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ *	linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ *      Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SSP_PL022_H
+#define _SSP_PL022_H
+
+#include <linux/device.h>
+
+/**
+ * whether SSP is in loopback mode or not
+ */
+enum ssp_loopback {
+	LOOPBACK_DISABLED,
+	LOOPBACK_ENABLED
+};
+
+/**
+ * enum ssp_interface - interfaces allowed for this SSP Controller
+ * @SSP_INTERFACE_MOTOROLA_SPI: Motorola Interface
+ * @SSP_INTERFACE_TI_SYNC_SERIAL: Texas Instrument Synchronous Serial
+ * interface
+ * @SSP_INTERFACE_NATIONAL_MICROWIRE: National Semiconductor Microwire
+ * interface
+ * @SSP_INTERFACE_UNIDIRECTIONAL: Unidirectional interface (STn8810
+ * &STn8815 only)
+ */
+enum ssp_interface {
+	SSP_INTERFACE_MOTOROLA_SPI,
+	SSP_INTERFACE_TI_SYNC_SERIAL,
+	SSP_INTERFACE_NATIONAL_MICROWIRE,
+	SSP_INTERFACE_UNIDIRECTIONAL
+};
+
+/**
+ * enum ssp_hierarchy - whether SSP is configured as Master or Slave
+ */
+enum ssp_hierarchy {
+	SSP_MASTER,
+	SSP_SLAVE
+};
+
+/**
+ * enum ssp_clock_params - clock parameters, to set SSP clock at a
+ * desired freq
+ */
+struct ssp_clock_params {
+	u8 cpsdvsr; /* value from 2 to 254 (even only!) */
+	u8 scr;	    /* value from 0 to 255 */
+};
+
+/**
+ * enum ssp_rx_endian - endianess of Rx FIFO Data
+ */
+enum ssp_rx_endian {
+	SSP_RX_MSB,
+	SSP_RX_LSB
+};
+
+/**
+ * enum ssp_tx_endian - endianess of Tx FIFO Data
+ */
+enum ssp_tx_endian {
+	SSP_TX_MSB,
+	SSP_TX_LSB
+};
+
+/**
+ * enum ssp_data_size - number of bits in one data element
+ */
+enum ssp_data_size {
+	SSP_DATA_BITS_4 = 0x03, SSP_DATA_BITS_5, SSP_DATA_BITS_6,
+	SSP_DATA_BITS_7, SSP_DATA_BITS_8, SSP_DATA_BITS_9,
+	SSP_DATA_BITS_10, SSP_DATA_BITS_11, SSP_DATA_BITS_12,
+	SSP_DATA_BITS_13, SSP_DATA_BITS_14, SSP_DATA_BITS_15,
+	SSP_DATA_BITS_16, SSP_DATA_BITS_17, SSP_DATA_BITS_18,
+	SSP_DATA_BITS_19, SSP_DATA_BITS_20, SSP_DATA_BITS_21,
+	SSP_DATA_BITS_22, SSP_DATA_BITS_23, SSP_DATA_BITS_24,
+	SSP_DATA_BITS_25, SSP_DATA_BITS_26, SSP_DATA_BITS_27,
+	SSP_DATA_BITS_28, SSP_DATA_BITS_29, SSP_DATA_BITS_30,
+	SSP_DATA_BITS_31, SSP_DATA_BITS_32
+};
+
+/**
+ * enum ssp_mode - SSP mode of operation (Communication modes)
+ */
+enum ssp_mode {
+	INTERRUPT_TRANSFER,
+	POLLING_TRANSFER,
+	DMA_TRANSFER
+};
+
+/**
+ * enum ssp_rx_level_trig - receive FIFO watermark level which triggers
+ * IT: Interrupt fires when _N_ or more elements in RX FIFO.
+ */
+enum ssp_rx_level_trig {
+	SSP_RX_1_OR_MORE_ELEM,
+	SSP_RX_4_OR_MORE_ELEM,
+	SSP_RX_8_OR_MORE_ELEM,
+	SSP_RX_16_OR_MORE_ELEM,
+	SSP_RX_32_OR_MORE_ELEM
+};
+
+/**
+ * Transmit FIFO watermark level which triggers (IT Interrupt fires
+ * when _N_ or more empty locations in TX FIFO)
+ */
+enum ssp_tx_level_trig {
+	SSP_TX_1_OR_MORE_EMPTY_LOC,
+	SSP_TX_4_OR_MORE_EMPTY_LOC,
+	SSP_TX_8_OR_MORE_EMPTY_LOC,
+	SSP_TX_16_OR_MORE_EMPTY_LOC,
+	SSP_TX_32_OR_MORE_EMPTY_LOC
+};
+
+/**
+ * enum SPI Clock Phase - clock phase (Motorola SPI interface only)
+ * @SSP_CLK_RISING_EDGE: Receive data on rising edge
+ * @SSP_CLK_FALLING_EDGE: Receive data on falling edge
+ */
+enum ssp_spi_clk_phase {
+	SSP_CLK_RISING_EDGE,
+	SSP_CLK_FALLING_EDGE
+};
+
+/**
+ * enum SPI Clock Polarity - clock polarity (Motorola SPI interface only)
+ * @SSP_CLK_POL_IDLE_LOW: Low inactive level
+ * @SSP_CLK_POL_IDLE_HIGH: High inactive level
+ */
+enum ssp_spi_clk_pol {
+	SSP_CLK_POL_IDLE_LOW,
+	SSP_CLK_POL_IDLE_HIGH
+};
+
+/**
+ * Microwire Conrol Lengths Command size in microwire format
+ */
+enum ssp_microwire_ctrl_len {
+	SSP_BITS_4 = 0x03, SSP_BITS_5, SSP_BITS_6,
+	SSP_BITS_7, SSP_BITS_8, SSP_BITS_9,
+	SSP_BITS_10, SSP_BITS_11, SSP_BITS_12,
+	SSP_BITS_13, SSP_BITS_14, SSP_BITS_15,
+	SSP_BITS_16, SSP_BITS_17, SSP_BITS_18,
+	SSP_BITS_19, SSP_BITS_20, SSP_BITS_21,
+	SSP_BITS_22, SSP_BITS_23, SSP_BITS_24,
+	SSP_BITS_25, SSP_BITS_26, SSP_BITS_27,
+	SSP_BITS_28, SSP_BITS_29, SSP_BITS_30,
+	SSP_BITS_31, SSP_BITS_32
+};
+
+/**
+ * enum Microwire Wait State
+ * @SSP_MWIRE_WAIT_ZERO: No wait state inserted after last command bit
+ * @SSP_MWIRE_WAIT_ONE: One wait state inserted after last command bit
+ */
+enum ssp_microwire_wait_state {
+	SSP_MWIRE_WAIT_ZERO,
+	SSP_MWIRE_WAIT_ONE
+};
+
+/**
+ * enum Microwire - whether Full/Half Duplex
+ * @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional,
+ *     SSPRXD not used
+ * @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is
+ *     an input.
+ */
+enum ssp_duplex {
+	SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	SSP_MICROWIRE_CHANNEL_HALF_DUPLEX
+};
+
+/**
+ * CHIP select/deselect commands
+ */
+enum ssp_chip_select {
+	SSP_CHIP_SELECT,
+	SSP_CHIP_DESELECT
+};
+
+
+/**
+ * struct pl022_ssp_master - device.platform_data for SPI controller devices.
+ * @num_chipselect: chipselects are used to distinguish individual
+ *     SPI slaves, and are numbered from zero to num_chipselects - 1.
+ *     each slave has a chipselect signal, but it's common that not
+ *     every chipselect is connected to a slave.
+ * @enable_dma: if true enables DMA driven transfers.
+ */
+struct pl022_ssp_controller {
+	u16 bus_id;
+	u8 num_chipselect;
+	u8 enable_dma:1;
+};
+
+/**
+ * struct ssp_config_chip - spi_board_info.controller_data for SPI
+ * slave devices, copied to spi_device.controller_data.
+ *
+ * @lbm: used for test purpose to internally connect RX and TX
+ * @iface: Interface type(Motorola, TI, Microwire, Universal)
+ * @hierarchy: sets whether interface is master or slave
+ * @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
+ * @clk_freq: Tune freq parameters of SSP(when in master mode)
+ * @endian_rx: Endianess of Data in Rx FIFO
+ * @endian_tx: Endianess of Data in Tx FIFO
+ * @data_size: Width of data element(4 to 32 bits)
+ * @com_mode: communication mode: polling, Interrupt or DMA
+ * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
+ * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
+ * @clk_phase: Motorola SPI interface Clock phase
+ * @clk_pol: Motorola SPI interface Clock polarity
+ * @ctrl_len: Microwire interface: Control length
+ * @wait_state: Microwire interface: Wait state
+ * @duplex: Microwire interface: Full/Half duplex
+ * @cs_control: function pointer to board-specific function to
+ * assert/deassert I/O port to control HW generation of devices chip-select.
+ * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
+ * @dma_config: DMA configuration for SSP controller and peripheral
+ */
+struct pl022_config_chip {
+	struct device *dev;
+	enum ssp_loopback lbm;
+	enum ssp_interface iface;
+	enum ssp_hierarchy hierarchy;
+	bool slave_tx_disable;
+	struct ssp_clock_params clk_freq;
+	enum ssp_rx_endian endian_rx;
+	enum ssp_tx_endian endian_tx;
+	enum ssp_data_size data_size;
+	enum ssp_mode com_mode;
+	enum ssp_rx_level_trig rx_lev_trig;
+	enum ssp_tx_level_trig tx_lev_trig;
+	enum ssp_spi_clk_phase clk_phase;
+	enum ssp_spi_clk_pol clk_pol;
+	enum ssp_microwire_ctrl_len ctrl_len;
+	enum ssp_microwire_wait_state wait_state;
+	enum ssp_duplex duplex;
+	void (*cs_control) (u32 control);
+};
+
+#endif /* _SSP_PL022_H */
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 64a982ea5d5..5a5a7fd6249 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -114,6 +114,9 @@
 #define UART011_IFLS_TX4_8	(2 << 0)
 #define UART011_IFLS_TX6_8	(3 << 0)
 #define UART011_IFLS_TX7_8	(4 << 0)
+/* special values for ST vendor with deeper fifo */
+#define UART011_IFLS_RX_HALF	(5 << 3)
+#define UART011_IFLS_TX_HALF	(5 << 0)
 
 #define UART011_OEIM		(1 << 10)	/* overrun error interrupt mask */
 #define UART011_BEIM		(1 << 9)	/* break error interrupt mask */
diff --git a/include/linux/cb710.h b/include/linux/cb710.h
new file mode 100644
index 00000000000..63bc9a4d292
--- /dev/null
+++ b/include/linux/cb710.h
@@ -0,0 +1,231 @@
+/*
+ *  cb710/cb710.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_DRIVER_H
+#define LINUX_CB710_DRIVER_H
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+struct cb710_slot;
+
+typedef int (*cb710_irq_handler_t)(struct cb710_slot *);
+
+/* per-virtual-slot structure */
+struct cb710_slot {
+	struct platform_device	pdev;
+	void __iomem		*iobase;
+	cb710_irq_handler_t	irq_handler;
+};
+
+/* per-device structure */
+struct cb710_chip {
+	struct pci_dev		*pdev;
+	void __iomem		*iobase;
+	unsigned		platform_id;
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	atomic_t		slot_refs_count;
+#endif
+	unsigned		slot_mask;
+	unsigned		slots;
+	spinlock_t		irq_lock;
+	struct cb710_slot	slot[0];
+};
+
+/* NOTE: cb710_chip.slots is modified only during device init/exit and
+ * they are all serialized wrt themselves */
+
+/* cb710_chip.slot_mask values */
+#define CB710_SLOT_MMC		1
+#define CB710_SLOT_MS		2
+#define CB710_SLOT_SM		4
+
+/* slot port accessors - so the logic is more clear in the code */
+#define CB710_PORT_ACCESSORS(t) \
+static inline void cb710_write_port_##t(struct cb710_slot *slot,	\
+	unsigned port, u##t value)					\
+{									\
+	iowrite##t(value, slot->iobase + port);				\
+}									\
+									\
+static inline u##t cb710_read_port_##t(struct cb710_slot *slot,		\
+	unsigned port)							\
+{									\
+	return ioread##t(slot->iobase + port);				\
+}									\
+									\
+static inline void cb710_modify_port_##t(struct cb710_slot *slot,	\
+	unsigned port, u##t set, u##t clear)				\
+{									\
+	iowrite##t(							\
+		(ioread##t(slot->iobase + port) & ~clear)|set,		\
+		slot->iobase + port);					\
+}
+
+CB710_PORT_ACCESSORS(8)
+CB710_PORT_ACCESSORS(16)
+CB710_PORT_ACCESSORS(32)
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+	int reg, uint32_t and, uint32_t xor);
+void cb710_set_irq_handler(struct cb710_slot *slot,
+	cb710_irq_handler_t handler);
+
+/* some device struct walking */
+
+static inline struct cb710_slot *cb710_pdev_to_slot(
+	struct platform_device *pdev)
+{
+	return container_of(pdev, struct cb710_slot, pdev);
+}
+
+static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot)
+{
+	return dev_get_drvdata(slot->pdev.dev.parent);
+}
+
+static inline struct device *cb710_slot_dev(struct cb710_slot *slot)
+{
+	return &slot->pdev.dev;
+}
+
+static inline struct device *cb710_chip_dev(struct cb710_chip *chip)
+{
+	return &chip->pdev->dev;
+}
+
+/* debugging aids */
+
+#ifdef CONFIG_CB710_DEBUG
+void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
+#else
+#define cb710_dump_regs(c, d) do {} while (0)
+#endif
+
+#define CB710_DUMP_REGS_MMC	0x0F
+#define CB710_DUMP_REGS_MS	0x30
+#define CB710_DUMP_REGS_SM	0xC0
+#define CB710_DUMP_REGS_ALL	0xFF
+#define CB710_DUMP_REGS_MASK	0xFF
+
+#define CB710_DUMP_ACCESS_8	0x100
+#define CB710_DUMP_ACCESS_16	0x200
+#define CB710_DUMP_ACCESS_32	0x400
+#define CB710_DUMP_ACCESS_ALL	0x700
+#define CB710_DUMP_ACCESS_MASK	0x700
+
+#endif /* LINUX_CB710_DRIVER_H */
+/*
+ *  cb710/sgbuf2.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_SG_H
+#define LINUX_CB710_SG_H
+
+#include <linux/highmem.h>
+#include <linux/scatterlist.h>
+
+/**
+ * cb710_sg_miter_stop_writing - stop mapping iteration after writing
+ * @miter: sg mapping iter to be stopped
+ *
+ * Description:
+ *   Stops mapping iterator @miter.  @miter should have been started
+ *   started using sg_miter_start().  A stopped iteration can be
+ *   resumed by calling sg_miter_next() on it.  This is useful when
+ *   resources (kmap) need to be released during iteration.
+ *
+ *   This is a convenience wrapper that will be optimized out for arches
+ *   that don't need flush_kernel_dcache_page().
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
+{
+	if (miter->page)
+		flush_kernel_dcache_page(miter->page);
+	sg_miter_stop(miter);
+}
+
+/*
+ * 32-bit PIO mapping sg iterator
+ *
+ * Hides scatterlist access issues - fragment boundaries, alignment, page
+ * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices
+ * without DMA support).
+ *
+ * Best-case reading (transfer from device):
+ *   sg_miter_start();
+ *   cb710_sg_dwiter_write_from_io();
+ *   cb710_sg_miter_stop_writing();
+ *
+ * Best-case writing (transfer to device):
+ *   sg_miter_start();
+ *   cb710_sg_dwiter_read_to_io();
+ *   sg_miter_stop();
+ */
+
+uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter);
+void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data);
+
+/**
+ * cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ *   Reads @count 32-bit words from register @port and stores it in
+ *   buffer iterated by @miter.  Data that would overflow the buffer
+ *   is silently ignored.  Iterator is advanced by 4*@count bytes
+ *   or to the buffer's end whichever is closer.
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter,
+	void __iomem *port, size_t count)
+{
+	while (count-- > 0)
+		cb710_sg_dwiter_write_next_block(miter, ioread32(port));
+}
+
+/**
+ * cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ *   Writes @count 32-bit words to register @port from buffer iterated
+ *   through @miter.  If buffer ends before @count words are written
+ *   missing data is replaced by zeroes. @miter is advanced by 4*@count
+ *   bytes or to the buffer's end whichever is closer.
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter,
+	void __iomem *port, size_t count)
+{
+	while (count-- > 0)
+		iowrite32(cb710_sg_dwiter_read_next_block(miter), port);
+}
+
+#endif /* LINUX_CB710_SG_H */
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 1db9bbf444a..1d37f42ac29 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -142,4 +142,17 @@ struct clk *clk_get_parent(struct clk *clk);
  */
 struct clk *clk_get_sys(const char *dev_id, const char *con_id);
 
+/**
+ * clk_add_alias - add a new clock alias
+ * @alias: name for clock alias
+ * @alias_dev_name: device name
+ * @id: platform specific clock name
+ * @dev: device
+ *
+ * Allows using generic clock names for drivers by adding a new alias.
+ * Assumes clkdev, see clkdev.h for more info.
+ */
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+			struct device *dev);
+
 #endif
diff --git a/include/linux/hid.h b/include/linux/hid.h
index a72876e4358..53489fd4d70 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -238,6 +238,42 @@ struct hid_item {
 #define HID_GD_RIGHT		0x00010092
 #define HID_GD_LEFT		0x00010093
 
+#define HID_DG_DIGITIZER	0x000d0001
+#define HID_DG_PEN		0x000d0002
+#define HID_DG_LIGHTPEN		0x000d0003
+#define HID_DG_TOUCHSCREEN	0x000d0004
+#define HID_DG_TOUCHPAD		0x000d0005
+#define HID_DG_STYLUS		0x000d0020
+#define HID_DG_PUCK		0x000d0021
+#define HID_DG_FINGER		0x000d0022
+#define HID_DG_TIPPRESSURE	0x000d0030
+#define HID_DG_BARRELPRESSURE	0x000d0031
+#define HID_DG_INRANGE		0x000d0032
+#define HID_DG_TOUCH		0x000d0033
+#define HID_DG_UNTOUCH		0x000d0034
+#define HID_DG_TAP		0x000d0035
+#define HID_DG_TABLETFUNCTIONKEY	0x000d0039
+#define HID_DG_PROGRAMCHANGEKEY	0x000d003a
+#define HID_DG_INVERT		0x000d003c
+#define HID_DG_TIPSWITCH	0x000d0042
+#define HID_DG_TIPSWITCH2	0x000d0043
+#define HID_DG_BARRELSWITCH	0x000d0044
+#define HID_DG_ERASER		0x000d0045
+#define HID_DG_TABLETPICK	0x000d0046
+/*
+ * as of May 20, 2009 the usages below are not yet in the official USB spec
+ * but are being pushed by Microsft as described in their paper "Digitizer
+ * Drivers for Windows Touch and Pen-Based Computers"
+ */
+#define HID_DG_CONFIDENCE	0x000d0047
+#define HID_DG_WIDTH		0x000d0048
+#define HID_DG_HEIGHT		0x000d0049
+#define HID_DG_CONTACTID	0x000d0051
+#define HID_DG_INPUTMODE	0x000d0052
+#define HID_DG_DEVICEINDEX	0x000d0053
+#define HID_DG_CONTACTCOUNT	0x000d0054
+#define HID_DG_CONTACTMAX	0x000d0055
+
 /*
  * HID report types --- Ouch! HID spec says 1 2 3!
  */
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
index a3c984d780f..33a63f62d57 100644
--- a/include/linux/keyboard.h
+++ b/include/linux/keyboard.h
@@ -56,6 +56,7 @@ extern int unregister_keyboard_notifier(struct notifier_block *nb);
 #define KT_ASCII	9
 #define KT_LOCK		10
 #define KT_SLOCK	12
+#define KT_DEAD2	13
 #define KT_BRL		14
 
 #define K(t,v)		(((t)<<8)|(v))
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 516d955ab8a..c377118884e 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -19,6 +19,13 @@
 	} while (0)
 
 /*
+ * data for the MMC controller
+ */
+struct tmio_mmc_data {
+	unsigned int		hclk;
+};
+
+/*
  * data for the NAND controller
  */
 struct tmio_nand_data {
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 19f8e6d1a4d..9f36e1cdbf0 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2127,6 +2127,7 @@
 #define PCI_VENDOR_ID_MAINPINE		0x1522
 #define PCI_DEVICE_ID_MAINPINE_PBRIDGE	0x0100
 #define PCI_VENDOR_ID_ENE		0x1524
+#define PCI_DEVICE_ID_ENE_CB710_FLASH	0x0510
 #define PCI_DEVICE_ID_ENE_CB712_SD	0x0550
 #define PCI_DEVICE_ID_ENE_CB712_SD_2	0x0551
 #define PCI_DEVICE_ID_ENE_CB714_SD	0x0750
diff --git a/include/linux/ultrasound.h b/include/linux/ultrasound.h
index 6b7703e75ce..71339dc531c 100644
--- a/include/linux/ultrasound.h
+++ b/include/linux/ultrasound.h
@@ -34,7 +34,7 @@
  *		_GUS_VOICEOFF	- Stops voice (no parameters)
  *		_GUS_VOICEFADE	- Stops the voice smoothly.
  *		_GUS_VOICEMODE	- Alters the voice mode, don't start or stop voice (P1=voice mode)
- *		_GUS_VOICEBALA	- Sets voice balence (P1, 0=left, 7=middle and 15=right, default 7)
+ *		_GUS_VOICEBALA	- Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7)
  *		_GUS_VOICEFREQ	- Sets voice (sample) playback frequency (P1=Hz)
  *		_GUS_VOICEVOL	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
  *		_GUS_VOICEVOL2	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
diff --git a/include/video/pxa168fb.h b/include/video/pxa168fb.h
new file mode 100644
index 00000000000..b5cc72fe046
--- /dev/null
+++ b/include/video/pxa168fb.h
@@ -0,0 +1,127 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/pxa168fb.h
+ *
+ *  Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_PXA168FB_H
+#define __ASM_MACH_PXA168FB_H
+
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+
+/* Dumb interface */
+#define PIN_MODE_DUMB_24		0
+#define PIN_MODE_DUMB_18_SPI		1
+#define PIN_MODE_DUMB_18_GPIO		2
+#define PIN_MODE_DUMB_16_SPI		3
+#define PIN_MODE_DUMB_16_GPIO		4
+#define PIN_MODE_DUMB_12_SPI_GPIO	5
+#define PIN_MODE_SMART_18_SPI		6
+#define PIN_MODE_SMART_16_SPI		7
+#define PIN_MODE_SMART_8_SPI_GPIO	8
+
+/* Dumb interface pin allocation */
+#define DUMB_MODE_RGB565		0
+#define DUMB_MODE_RGB565_UPPER		1
+#define DUMB_MODE_RGB666		2
+#define DUMB_MODE_RGB666_UPPER		3
+#define DUMB_MODE_RGB444		4
+#define DUMB_MODE_RGB444_UPPER		5
+#define DUMB_MODE_RGB888		6
+
+/* default fb buffer size WVGA-32bits */
+#define DEFAULT_FB_SIZE	(800 * 480 * 4)
+
+/*
+ * Buffer pixel format
+ * bit0 is for rb swap.
+ * bit12 is for Y UorV swap
+ */
+#define PIX_FMT_RGB565		0
+#define PIX_FMT_BGR565		1
+#define PIX_FMT_RGB1555		2
+#define PIX_FMT_BGR1555		3
+#define PIX_FMT_RGB888PACK	4
+#define PIX_FMT_BGR888PACK	5
+#define PIX_FMT_RGB888UNPACK	6
+#define PIX_FMT_BGR888UNPACK	7
+#define PIX_FMT_RGBA888		8
+#define PIX_FMT_BGRA888		9
+#define PIX_FMT_YUV422PACK	10
+#define PIX_FMT_YVU422PACK	11
+#define PIX_FMT_YUV422PLANAR	12
+#define PIX_FMT_YVU422PLANAR	13
+#define PIX_FMT_YUV420PLANAR	14
+#define PIX_FMT_YVU420PLANAR	15
+#define PIX_FMT_PSEUDOCOLOR	20
+#define PIX_FMT_UYVY422PACK	(0x1000|PIX_FMT_YUV422PACK)
+
+/*
+ * PXA LCD controller private state.
+ */
+struct pxa168fb_info {
+	struct device		*dev;
+	struct clk		*clk;
+	struct fb_info		*info;
+
+	void __iomem		*reg_base;
+	dma_addr_t		fb_start_dma;
+	u32			pseudo_palette[16];
+
+	int			pix_fmt;
+	unsigned		is_blanked:1;
+	unsigned		panel_rbswap:1;
+	unsigned		active:1;
+};
+
+/*
+ * PXA fb machine information
+ */
+struct pxa168fb_mach_info {
+	char	id[16];
+
+	int		num_modes;
+	struct fb_videomode *modes;
+
+	/*
+	 * Pix_fmt
+	 */
+	unsigned	pix_fmt;
+
+	/*
+	 * I/O pin allocation.
+	 */
+	unsigned	io_pin_allocation_mode:4;
+
+	/*
+	 * Dumb panel -- assignment of R/G/B component info to the 24
+	 * available external data lanes.
+	 */
+	unsigned	dumb_mode:4;
+	unsigned	panel_rgb_reverse_lanes:1;
+
+	/*
+	 * Dumb panel -- GPIO output data.
+	 */
+	unsigned	gpio_output_mask:8;
+	unsigned	gpio_output_data:8;
+
+	/*
+	 * Dumb panel -- configurable output signal polarity.
+	 */
+	unsigned	invert_composite_blank:1;
+	unsigned	invert_pix_val_ena:1;
+	unsigned	invert_pixclock:1;
+	unsigned	invert_vsync:1;
+	unsigned	invert_hsync:1;
+	unsigned	panel_rbswap:1;
+	unsigned	active:1;
+	unsigned	enable_lcd:1;
+};
+
+#endif /* __ASM_MACH_PXA168FB_H */
diff --git a/kernel/power/poweroff.c b/kernel/power/poweroff.c
index 97890831e1b..e8b33700627 100644
--- a/kernel/power/poweroff.c
+++ b/kernel/power/poweroff.c
@@ -34,7 +34,7 @@ static struct sysrq_key_op	sysrq_poweroff_op = {
 	.handler        = handle_poweroff,
 	.help_msg       = "powerOff",
 	.action_msg     = "Power Off",
- 	.enable_mask	= SYSRQ_ENABLE_BOOT,
+	.enable_mask	= SYSRQ_ENABLE_BOOT,
 };
 
 static int pm_sysrq_init(void)
diff --git a/kernel/rtmutex.c b/kernel/rtmutex.c
index 820c5af44f3..fcd107a78c5 100644
--- a/kernel/rtmutex.c
+++ b/kernel/rtmutex.c
@@ -902,7 +902,7 @@ EXPORT_SYMBOL_GPL(rt_mutex_lock_interruptible);
  * Returns:
  *  0 		on success
  * -EINTR 	when interrupted by a signal
- * -ETIMEOUT	when the timeout expired
+ * -ETIMEDOUT	when the timeout expired
  * -EDEADLK	when the lock would deadlock (when deadlock detection is on)
  */
 int
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index ca8cb326d1d..ead6c7a42f4 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -168,7 +168,7 @@ config IPV6_SIT
 	  into IPv4 packets. This is useful if you want to connect two IPv6
 	  networks over an IPv4-only path.
 
-	  Saying M here will produce a module called sit.ko. If unsure, say Y.
+	  Saying M here will produce a module called sit. If unsure, say Y.
 
 config IPV6_NDISC_NODETYPE
 	bool
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index a8218bc1806..597487ae6ce 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2765,7 +2765,7 @@ static void addrconf_dad_start(struct inet6_ifaddr *ifp, u32 flags)
 		spin_unlock_bh(&ifp->lock);
 		read_unlock_bh(&idev->lock);
 		/*
-		 * If the defice is not ready:
+		 * If the device is not ready:
 		 * - keep it tentative if it is a permanent address.
 		 * - otherwise, kill it.
 		 */
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index cb3ad741ebf..c26a20c58dd 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -327,7 +327,7 @@ config NETFILTER_XT_TARGET_CONNMARK
 
 	  If you want to compile it as a module, say M here and read
 	  <file:Documentation/kbuild/modules.txt>.  The module will be called
-	  ipt_CONNMARK.ko.  If unsure, say `N'.
+	  ipt_CONNMARK.  If unsure, say `N'.
 
 config NETFILTER_XT_TARGET_CONNSECMARK
 	tristate '"CONNSECMARK" target support'
@@ -584,7 +584,7 @@ config NETFILTER_XT_MATCH_CONNMARK
 
 	  If you want to compile it as a module, say M here and read
 	  <file:Documentation/kbuild/modules.txt>.  The module will be called
-	  ipt_connmark.ko.  If unsure, say `N'.
+	  ipt_connmark.  If unsure, say `N'.
 
 config NETFILTER_XT_MATCH_CONNTRACK
 	tristate '"conntrack" connection tracking match support'
diff --git a/net/netfilter/nf_conntrack_acct.c b/net/netfilter/nf_conntrack_acct.c
index 9fe8982bd7c..4a1d94aac20 100644
--- a/net/netfilter/nf_conntrack_acct.c
+++ b/net/netfilter/nf_conntrack_acct.c
@@ -116,7 +116,7 @@ int nf_conntrack_acct_init(struct net *net)
 	if (net_eq(net, &init_net)) {
 #ifdef CONFIG_NF_CT_ACCT
 	printk(KERN_WARNING "CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use\n");
-		printk(KERN_WARNING "nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or\n");
+		printk(KERN_WARNING "nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or\n");
 		printk(KERN_WARNING "sysctl net.netfilter.nf_conntrack_acct=1 to enable it.\n");
 #endif
 
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 5c48e36038f..dc78272fc39 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -1089,7 +1089,7 @@ static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id)
 		goto out;
 	}
 
-	aaci->base = ioremap(dev->res.start, SZ_4K);
+	aaci->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!aaci->base) {
 		ret = -ENOMEM;
 		goto out;
diff --git a/sound/oss/msnd.c b/sound/oss/msnd.c
index e4282d93a1a..21eb6dce46d 100644
--- a/sound/oss/msnd.c
+++ b/sound/oss/msnd.c
@@ -100,7 +100,7 @@ void msnd_fifo_free(msnd_fifo *f)
 int msnd_fifo_alloc(msnd_fifo *f, size_t n)
 {
 	msnd_fifo_free(f);
-	f->data = (char *)vmalloc(n);
+	f->data = vmalloc(n);
 	f->n = n;
 	f->tail = 0;
 	f->head = 0;
diff --git a/sound/pci/aw2/aw2-saa7146.c b/sound/pci/aw2/aw2-saa7146.c
index 6a3891ab69d..296123ab74f 100644
--- a/sound/pci/aw2/aw2-saa7146.c
+++ b/sound/pci/aw2/aw2-saa7146.c
@@ -108,7 +108,7 @@ void snd_aw2_saa7146_setup(struct snd_aw2_saa7146 *chip,
 #endif
 	/* WS0_CTRL, WS0_SYNC: input TSL1, I2S */
 
-	/* At initialization WS1 and WS2 are disbaled (configured as input */
+	/* At initialization WS1 and WS2 are disabled (configured as input) */
 	acon1 |= 0 * WS1_CTRL;
 	acon1 |= 0 * WS2_CTRL;
 
diff --git a/sound/pci/sis7019.h b/sound/pci/sis7019.h
index 013b6739a74..bc8c7681940 100644
--- a/sound/pci/sis7019.h
+++ b/sound/pci/sis7019.h
@@ -203,7 +203,7 @@
 #define SIS_WEISR_B	0xac
 
 
-/* Playback DMA parameters (paramter RAM) */
+/* Playback DMA parameters (parameter RAM) */
 #define SIS_PLAY_DMA_OFFSET	0x0000
 #define SIS_PLAY_DMA_SIZE	0x10
 #define SIS_PLAY_DMA_ADDR(addr, num) \
@@ -228,7 +228,7 @@
 #define		SIS_PLAY_DMA_SSO_MASK		0xffff0000
 #define		SIS_PLAY_DMA_ESO_MASK		0x0000ffff
 
-/* Capture DMA parameters (paramter RAM) */
+/* Capture DMA parameters (parameter RAM) */
 #define SIS_CAPTURE_DMA_OFFSET	0x0800
 #define SIS_CAPTURE_DMA_SIZE	0x10
 #define SIS_CAPTURE_DMA_ADDR(addr, num) \
diff --git a/sound/pci/vx222/vx222_ops.c b/sound/pci/vx222/vx222_ops.c
index c0efe449111..6416d3f0c7b 100644
--- a/sound/pci/vx222/vx222_ops.c
+++ b/sound/pci/vx222/vx222_ops.c
@@ -367,7 +367,7 @@ static int vx2_load_xilinx_binary(struct vx_core *chip, const struct firmware *x
 	unsigned int port;
 	const unsigned char *image;
 
-	/* XILINX reset (wait at least 1 milisecond between reset on and off). */
+	/* XILINX reset (wait at least 1 millisecond between reset on and off). */
 	vx_outl(chip, CNTRL, VX_CNTRL_REGISTER_VALUE | VX_XILINX_RESET_MASK);
 	vx_inl(chip, CNTRL);
 	msleep(10);
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index dcd163a4ee9..6375b4ea525 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -98,13 +98,14 @@ config SND_PXA2XX_SOC_EM_X270
 	  CompuLab EM-x270, eXeda and CM-X300 machines.
 
 config SND_PXA2XX_SOC_PALM27X
-	bool "SoC Audio support for Palm T|X, T5 and LifeDrive"
-	depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || MACH_PALMT5)
+	bool "SoC Audio support for Palm T|X, T5, E2 and LifeDrive"
+	depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || \
+			MACH_PALMT5 || MACH_PALMTE2)
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
 	  Say Y if you want to add support for SoC audio on
-	  Palm T|X, T5 or LifeDrive handheld computer.
+	  Palm T|X, T5, E2 or LifeDrive handheld computer.
 
 config SND_SOC_ZYLONITE
 	tristate "SoC Audio support for Marvell Zylonite"
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c
index 44fcc4e01e0..e6102fda0a7 100644
--- a/sound/soc/pxa/palm27x.c
+++ b/sound/soc/pxa/palm27x.c
@@ -205,7 +205,7 @@ static int palm27x_asoc_probe(struct platform_device *pdev)
 	int ret;
 
 	if (!(machine_is_palmtx() || machine_is_palmt5() ||
-		machine_is_palmld()))
+		machine_is_palmld() || machine_is_palmte2()))
 		return -ENODEV;
 
 	if (pdev->dev.platform_data)
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index 168a088ba76..a587ec40b44 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index 3698f707c44..3f03d5ddfac 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/wait.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 
 #include <sound/core.h>
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index cc066964dad..556e35f0ab7 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -21,6 +21,8 @@
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index 169ddad3157..eecfa5eba06 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -218,24 +218,17 @@ static int s3c24xx_pcm_prepare(struct snd_pcm_substream *substream)
 	 * sync to pclk, half-word transfers to the IIS-FIFO. */
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		s3c2410_dma_devconfig(prtd->params->channel,
-				S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
-				S3C2410_DISRCC_APB, prtd->params->dma_addr);
-
-		s3c2410_dma_config(prtd->params->channel,
-				prtd->params->dma_size,
-				S3C2410_DCON_SYNC_PCLK |
-				S3C2410_DCON_HANDSHAKE);
+				      S3C2410_DMASRC_MEM,
+				      prtd->params->dma_addr);
 	} else {
-		s3c2410_dma_config(prtd->params->channel,
-				prtd->params->dma_size,
-				S3C2410_DCON_HANDSHAKE |
-				S3C2410_DCON_SYNC_PCLK);
-
 		s3c2410_dma_devconfig(prtd->params->channel,
-					S3C2410_DMASRC_HW, 0x3,
-					prtd->params->dma_addr);
+				      S3C2410_DMASRC_HW,
+				      prtd->params->dma_addr);
 	}
 
+	s3c2410_dma_config(prtd->params->channel,
+			   prtd->params->dma_size);
+
 	/* flush the DMA channel */
 	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
 	prtd->dma_loaded = 0;
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index ecb58e7a624..4bd3a7a0edc 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -423,7 +423,7 @@ static int set_ctl_value(struct usb_mixer_elem_info *cval, int request, int vali
 	value_set = convert_bytes_value(cval, value_set);
 	buf[0] = value_set & 0xff;
 	buf[1] = (value_set >> 8) & 0xff;
-	while (timeout -- > 0)
+	while (timeout-- > 0)
 		if (snd_usb_ctl_msg(cval->mixer->chip->dev,
 				    usb_sndctrlpipe(cval->mixer->chip->dev, 0),
 				    request,