aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/scsi/sym53c8xx_2/sym_fw.c6
-rw-r--r--drivers/scsi/sym53c8xx_2/sym_glue.c25
-rw-r--r--drivers/scsi/sym53c8xx_2/sym_hipd.c8
-rw-r--r--drivers/scsi/sym53c8xx_2/sym_hipd.h1
4 files changed, 16 insertions, 24 deletions
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.c b/drivers/scsi/sym53c8xx_2/sym_fw.c
index 9916a2a2255..2be0ae17e06 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw.c
+++ b/drivers/scsi/sym53c8xx_2/sym_fw.c
@@ -206,13 +206,13 @@ sym_fw2_patch(struct sym_hcb *np)
* they are not desirable. See `sym_fw2.h' for more details.
*/
if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_66 &&
- np->revision_id < 0x1 &&
+ np->s.device->revision < 0x1 &&
np->pciclk_khz < 60000)) {
scripta0->datao_phase[0] = cpu_to_scr(SCR_NO_OP);
scripta0->datao_phase[1] = cpu_to_scr(0);
}
- if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
- /* np->revision_id < 0xff */ 1)) {
+ if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 /* &&
+ np->s.device->revision < 0xff */)) {
scripta0->sel_done[0] = cpu_to_scr(SCR_NO_OP);
scripta0->sel_done[1] = cpu_to_scr(0);
}
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 67a577db5d1..3ed3ed86d35 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1254,8 +1254,8 @@ static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len)
info.pos = 0;
copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, "
- "revision id 0x%x\n",
- np->s.chip_name, np->device_id, np->revision_id);
+ "revision id 0x%x\n", np->s.chip_name,
+ np->device_id, np->s.device->revision);
copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n",
pci_name(np->s.device), IRQ_PRM(np->s.device->irq));
copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n",
@@ -1368,10 +1368,9 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
unsigned long flags;
struct sym_fw *fw;
- printk(KERN_INFO
- "sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n",
- unit, dev->chip.name, dev->chip.revision_id,
- pci_name(pdev), IRQ_PRM(pdev->irq));
+ printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n",
+ unit, dev->chip.name, pdev->revision, pci_name(pdev),
+ IRQ_PRM(pdev->irq));
/*
* Get the firmware for this chip.
@@ -1412,7 +1411,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
np->s.device = pdev;
np->s.unit = unit;
np->device_id = dev->chip.device_id;
- np->revision_id = dev->chip.revision_id;
np->features = dev->chip.features;
np->clock_divn = dev->chip.nr_divisor;
np->maxoffs = dev->chip.offset_max;
@@ -1500,7 +1498,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
instance->transportt = sym2_transport_template;
/* 53c896 rev 1 errata: DMA may not cross 16MB boundary */
- if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && np->revision_id < 2)
+ if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 2)
instance->dma_boundary = 0xFFFFFF;
spin_unlock_irqrestore(instance->host_lock, flags);
@@ -1545,7 +1543,6 @@ static int __devinit sym_check_supported(struct sym_device *device)
{
struct sym_chip *chip;
struct pci_dev *pdev = device->pdev;
- u_char revision;
unsigned long io_port = pci_resource_start(pdev, 0);
int i;
@@ -1565,14 +1562,12 @@ static int __devinit sym_check_supported(struct sym_device *device)
* to our device structure so we can make it match the actual device
* and options.
*/
- pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
- chip = sym_lookup_chip_table(pdev->device, revision);
+ chip = sym_lookup_chip_table(pdev->device, pdev->revision);
if (!chip) {
dev_info(&pdev->dev, "device not supported\n");
return -ENODEV;
}
memcpy(&device->chip, chip, sizeof(device->chip));
- device->chip.revision_id = revision;
return 0;
}
@@ -1613,7 +1608,7 @@ static int __devinit sym_set_workarounds(struct sym_device *device)
* We must ensure the chip will use WRITE AND INVALIDATE.
* The revision number limit is for now arbitrary.
*/
- if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && chip->revision_id < 0x4) {
+ if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 0x4) {
chip->features |= (FE_WRIE | FE_CLSE);
}
@@ -1905,12 +1900,10 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev)
*/
static void sym2_reset_workarounds(struct pci_dev *pdev)
{
- u_char revision;
u_short status_reg;
struct sym_chip *chip;
- pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
- chip = sym_lookup_chip_table(pdev->device, revision);
+ chip = sym_lookup_chip_table(pdev->device, pdev->revision);
/* Work around for errant bit in 895A, in a fashion
* similar to what is done in sym_set_workarounds().
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index af24c447b19..9f4198ce845 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -805,7 +805,7 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
* are used. Disable internal cycles.
*/
if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
- np->revision_id < 0x1)
+ np->s.device->revision < 0x1)
np->rv_ccntl0 |= DILS;
/*
@@ -829,9 +829,9 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
* LOAD/STORE instructions does not need this work-around.
*/
if ((np->device_id == PCI_DEVICE_ID_NCR_53C810 &&
- np->revision_id >= 0x10 && np->revision_id <= 0x11) ||
+ np->s.device->revision >= 0x10 && np->s.device->revision <= 0x11) ||
(np->device_id == PCI_DEVICE_ID_NCR_53C860 &&
- np->revision_id <= 0x1))
+ np->s.device->revision <= 0x1))
np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP);
/*
@@ -1809,7 +1809,7 @@ void sym_start_up (struct sym_hcb *np, int reason)
* I just don't want. :)
*/
if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
- np->revision_id < 1)
+ np->s.device->revision < 1)
OUTB(np, nc_stest1, INB(np, nc_stest1) | 0x30);
/*
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 79ab6a17703..3aa8060a4d2 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -919,7 +919,6 @@ struct sym_hcb {
* General controller parameters and configuration.
*/
u_short device_id; /* PCI device id */
- u_char revision_id; /* PCI device revision id */
u_int features; /* Chip features map */
u_char myaddr; /* SCSI id of the adapter */
u_char maxburst; /* log base 2 of dwords burst */