aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/wireless/p54/Kconfig10
-rw-r--r--drivers/net/wireless/p54/Makefile1
-rw-r--r--drivers/net/wireless/p54/p54.h9
-rw-r--r--drivers/net/wireless/p54/p54common.c3
-rw-r--r--drivers/net/wireless/p54/p54spi.c759
-rw-r--r--drivers/net/wireless/p54/p54spi.h127
6 files changed, 908 insertions, 1 deletions
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index d3469d08f96..cfc5f41aa13 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -61,3 +61,13 @@ config P54_PCI
http://prism54.org/
If you choose to build a module, it'll be called p54pci.
+
+config P54_SPI
+ tristate "Prism54 SPI (stlc45xx) support"
+ depends on P54_COMMON && SPI_MASTER
+ ---help---
+ This driver is for stlc4550 or stlc4560 based wireless chips.
+ This driver is experimental, untested and will probably only work on
+ Nokia's N800/N810 Portable Internet Tablet.
+
+ If you choose to build a module, it'll be called p54spi.
diff --git a/drivers/net/wireless/p54/Makefile b/drivers/net/wireless/p54/Makefile
index 4fa9ce71736..c2050dee629 100644
--- a/drivers/net/wireless/p54/Makefile
+++ b/drivers/net/wireless/p54/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_P54_COMMON) += p54common.o
obj-$(CONFIG_P54_USB) += p54usb.o
obj-$(CONFIG_P54_PCI) += p54pci.o
+obj-$(CONFIG_P54_SPI) += p54spi.o
diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index ac11efd19db..64492feca9b 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -104,6 +104,14 @@ struct p54_cal_database {
#define FW_LM87 0x4c4d3837
#define FW_LM20 0x4c4d3230
+enum fw_state {
+ FW_STATE_OFF,
+ FW_STATE_BOOTING,
+ FW_STATE_READY,
+ FW_STATE_RESET,
+ FW_STATE_RESETTING,
+};
+
struct p54_common {
struct ieee80211_hw *hw;
u32 rx_start;
@@ -154,6 +162,7 @@ struct p54_common {
int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb);
void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb);
int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw);
+int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len);
int p54_read_eeprom(struct ieee80211_hw *dev);
struct ieee80211_hw *p54_init_common(size_t priv_data_len);
void p54_free_common(struct ieee80211_hw *dev);
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 9fc0c9efe70..45c2e7ad3ac 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -483,7 +483,7 @@ static struct p54_cal_database *p54_convert_db(struct pda_custom_wrapper *src,
return dst;
}
-static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
+int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
{
struct p54_common *priv = dev->priv;
struct eeprom_pda_wrap *wrap = NULL;
@@ -698,6 +698,7 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
wiphy_name(dev->wiphy));
return err;
}
+EXPORT_SYMBOL_GPL(p54_parse_eeprom);
static int p54_rssi_to_dbm(struct ieee80211_hw *dev, int rssi)
{
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
new file mode 100644
index 00000000000..b8dede741ef
--- /dev/null
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -0,0 +1,759 @@
+/*
+ * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de>
+ * Copyright 2008 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This driver is a port from stlc45xx:
+ * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/spi/spi.h>
+#include <linux/etherdevice.h>
+#include <linux/gpio.h>
+
+#include "p54spi.h"
+#include "p54spi_eeprom.h"
+#include "p54.h"
+
+#include "p54common.h"
+
+MODULE_FIRMWARE("3826.arm");
+MODULE_ALIAS("stlc45xx");
+
+static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
+ void *buf, size_t len)
+{
+ struct spi_transfer t[2];
+ struct spi_message m;
+ __le16 addr;
+
+ /* We first push the address */
+ addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15);
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = &addr;
+ t[0].len = sizeof(addr);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ spi_sync(priv->spi, &m);
+}
+
+
+static void p54spi_spi_write(struct p54s_priv *priv, u8 address,
+ const void *buf, size_t len)
+{
+ struct spi_transfer t[3];
+ struct spi_message m;
+ __le16 addr;
+
+ /* We first push the address */
+ addr = cpu_to_le16(address << 8);
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = &addr;
+ t[0].len = sizeof(addr);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ if (len % 2) {
+ __le16 last_word;
+ last_word = cpu_to_le16(((u8 *)buf)[len - 1]);
+
+ t[2].tx_buf = &last_word;
+ t[2].len = sizeof(last_word);
+ spi_message_add_tail(&t[2], &m);
+ }
+
+ spi_sync(priv->spi, &m);
+}
+
+static u16 p54spi_read16(struct p54s_priv *priv, u8 addr)
+{
+ __le16 val;
+
+ p54spi_spi_read(priv, addr, &val, sizeof(val));
+
+ return le16_to_cpu(val);
+}
+
+static u32 p54spi_read32(struct p54s_priv *priv, u8 addr)
+{
+ __le32 val;
+
+ p54spi_spi_read(priv, addr, &val, sizeof(val));
+
+ return le32_to_cpu(val);
+}
+
+static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val)
+{
+ p54spi_spi_write(priv, addr, &val, sizeof(val));
+}
+
+static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val)
+{
+ p54spi_spi_write(priv, addr, &val, sizeof(val));
+}
+
+struct p54spi_spi_reg {
+ u16 address; /* __le16 ? */
+ u16 length;
+ char *name;
+};
+
+static const struct p54spi_spi_reg p54spi_registers_array[] =
+{
+ { SPI_ADRS_ARM_INTERRUPTS, 32, "ARM_INT " },
+ { SPI_ADRS_ARM_INT_EN, 32, "ARM_INT_ENA " },
+ { SPI_ADRS_HOST_INTERRUPTS, 32, "HOST_INT " },
+ { SPI_ADRS_HOST_INT_EN, 32, "HOST_INT_ENA" },
+ { SPI_ADRS_HOST_INT_ACK, 32, "HOST_INT_ACK" },
+ { SPI_ADRS_GEN_PURP_1, 32, "GP1_COMM " },
+ { SPI_ADRS_GEN_PURP_2, 32, "GP2_COMM " },
+ { SPI_ADRS_DEV_CTRL_STAT, 32, "DEV_CTRL_STA" },
+ { SPI_ADRS_DMA_DATA, 16, "DMA_DATA " },
+ { SPI_ADRS_DMA_WRITE_CTRL, 16, "DMA_WR_CTRL " },
+ { SPI_ADRS_DMA_WRITE_LEN, 16, "DMA_WR_LEN " },
+ { SPI_ADRS_DMA_WRITE_BASE, 32, "DMA_WR_BASE " },
+ { SPI_ADRS_DMA_READ_CTRL, 16, "DMA_RD_CTRL " },
+ { SPI_ADRS_DMA_READ_LEN, 16, "DMA_RD_LEN " },
+ { SPI_ADRS_DMA_WRITE_BASE, 32, "DMA_RD_BASE " }
+};
+
+static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, __le32 bits)
+{
+ int i;
+ __le32 buffer;
+
+ for (i = 0; i < 2000; i++) {
+ p54spi_spi_read(priv, reg, &buffer, sizeof(buffer));
+ if (buffer == bits)
+ return 1;
+
+ msleep(1);
+ }
+ return 0;
+}
+
+static int p54spi_request_firmware(struct ieee80211_hw *dev)
+{
+ struct p54s_priv *priv = dev->priv;
+ int ret;
+
+ /* FIXME: should driver use it's own struct device? */
+ ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev);
+
+ if (ret < 0) {
+ dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret);
+ return ret;
+ }
+
+ ret = p54_parse_firmware(dev, priv->firmware);
+ if (ret) {
+ release_firmware(priv->firmware);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int p54spi_request_eeprom(struct ieee80211_hw *dev)
+{
+ struct p54s_priv *priv = dev->priv;
+ const struct firmware *eeprom;
+ int ret;
+
+ /*
+ * allow users to customize their eeprom.
+ */
+
+ ret = request_firmware(&eeprom, "3826.eeprom", &priv->spi->dev);
+ if (ret < 0) {
+ dev_info(&priv->spi->dev, "loading default eeprom...\n");
+ ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom,
+ sizeof(p54spi_eeprom));
+ } else {
+ dev_info(&priv->spi->dev, "loading user eeprom...\n");
+ ret = p54_parse_eeprom(dev, (void *) eeprom->data,
+ (int)eeprom->size);
+ release_firmware(eeprom);
+ }
+ return ret;
+}
+
+static int p54spi_upload_firmware(struct ieee80211_hw *dev)
+{
+ struct p54s_priv *priv = dev->priv;
+ unsigned long fw_len, fw_addr;
+ long _fw_len;
+
+ /* stop the device */
+ p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
+ SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
+ SPI_CTRL_STAT_START_HALTED));
+
+ msleep(TARGET_BOOT_SLEEP);
+
+ p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
+ SPI_CTRL_STAT_HOST_OVERRIDE |
+ SPI_CTRL_STAT_START_HALTED));
+
+ msleep(TARGET_BOOT_SLEEP);
+
+ fw_addr = ISL38XX_DEV_FIRMWARE_ADDR;
+ fw_len = priv->firmware->size;
+
+ while (fw_len > 0) {
+ _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE);
+
+ p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
+ cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
+
+ if (p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL,
+ cpu_to_le32(HOST_ALLOWED)) == 0) {
+ dev_err(&priv->spi->dev, "fw_upload not allowed "
+ "to DMA write.");
+ return -EAGAIN;
+ }
+
+ p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN,
+ cpu_to_le16(_fw_len));
+ p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE,
+ cpu_to_le32(fw_addr));
+
+ p54spi_spi_write(priv, SPI_ADRS_DMA_DATA,
+ &priv->firmware->data, _fw_len);
+
+ fw_len -= _fw_len;
+ fw_addr += _fw_len;
+
+ /* FIXME: I think this doesn't work if firmware is large,
+ * this loop goes to second round. fw->data is not
+ * increased at all! */
+ }
+
+ BUG_ON(fw_len != 0);
+
+ /* enable host interrupts */
+ p54spi_write32(priv, SPI_ADRS_HOST_INT_EN,
+ cpu_to_le32(SPI_HOST_INTS_DEFAULT));
+
+ /* boot the device */
+ p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
+ SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
+ SPI_CTRL_STAT_RAM_BOOT));
+
+ msleep(TARGET_BOOT_SLEEP);
+
+ p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
+ SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT));
+ msleep(TARGET_BOOT_SLEEP);
+ return 0;
+}
+
+static void p54spi_power_off(struct p54s_priv *priv)
+{
+ disable_irq(gpio_to_irq(priv->config->irq_gpio));
+ gpio_set_value(priv->config->power_gpio, 0);
+}
+
+static void p54spi_power_on(struct p54s_priv *priv)
+{
+ gpio_set_value(priv->config->power_gpio, 1);
+ enable_irq(gpio_to_irq(priv->config->irq_gpio));
+
+ /*
+ * need to wait a while before device can be accessed, the lenght
+ * is just a guess
+ */
+ msleep(10);
+}
+
+static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val)
+{
+ p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val));
+}
+
+static void p54spi_wakeup(struct p54s_priv *priv)
+{
+ unsigned long timeout;
+ u32 ints;
+
+ /* wake the chip */
+ p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
+ cpu_to_le32(SPI_TARGET_INT_WAKEUP));
+
+ /* And wait for the READY interrupt */
+ timeout = jiffies + HZ;
+
+ ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+ while (!(ints & SPI_HOST_INT_READY)) {
+ if (time_after(jiffies, timeout))
+ goto out;
+ ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+ }
+
+ p54spi_int_ack(priv, SPI_HOST_INT_READY);
+
+out:
+ return;
+}
+
+static inline void p54spi_sleep(struct p54s_priv *priv)
+{
+ p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
+ cpu_to_le32(SPI_TARGET_INT_SLEEP));
+}
+
+static void p54spi_int_ready(struct p54s_priv *priv)
+{
+ p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32(
+ SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE));
+
+ switch (priv->fw_state) {
+ case FW_STATE_BOOTING:
+ priv->fw_state = FW_STATE_READY;
+ complete(&priv->fw_comp);
+ break;
+ case FW_STATE_RESETTING:
+ priv->fw_state = FW_STATE_READY;
+ /* TODO: reinitialize state */
+ break;
+ default:
+ break;
+ }
+}
+
+static int p54spi_rx(struct p54s_priv *priv)
+{
+ struct sk_buff *skb;
+ u16 len;
+
+ p54spi_wakeup(priv);
+
+ /* dummy read to flush SPI DMA controller bug */
+ p54spi_read16(priv, SPI_ADRS_GEN_PURP_1);
+
+ len = p54spi_read16(priv, SPI_ADRS_DMA_DATA);
+
+ if (len == 0) {
+ dev_err(&priv->spi->dev, "rx request of zero bytes");
+ return 0;
+ }
+
+ skb = dev_alloc_skb(len);
+ if (!skb) {
+ dev_err(&priv->spi->dev, "could not alloc skb");
+ return 0;
+ }
+
+ p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, skb_put(skb, len), len);
+ p54spi_sleep(priv);
+
+ if (p54_rx(priv->hw, skb) == 0)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+
+static irqreturn_t p54spi_interrupt(int irq, void *config)
+{
+ struct spi_device *spi = config;
+ struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
+
+ queue_work(priv->hw->workqueue, &priv->work);
+
+ return IRQ_HANDLED;
+}
+
+static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
+{
+ struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
+ struct p54s_dma_regs dma_regs;
+ unsigned long timeout;
+ int ret = 0;
+ u32 ints;
+
+ p54spi_wakeup(priv);
+
+ dma_regs.cmd = cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE);
+ dma_regs.len = cpu_to_le16(skb->len);
+ dma_regs.addr = hdr->req_id;
+
+ p54spi_spi_write(priv, SPI_ADRS_DMA_WRITE_CTRL, &dma_regs,
+ sizeof(dma_regs));
+
+ p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, skb->data, skb->len);
+
+ timeout = jiffies + 2 * HZ;
+ ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+ while (!(ints & SPI_HOST_INT_WR_READY)) {
+ if (time_after(jiffies, timeout)) {
+ dev_err(&priv->spi->dev, "WR_READY timeout");
+ ret = -1;
+ goto out;
+ }
+ ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+ }
+
+ p54spi_int_ack(priv, SPI_HOST_INT_WR_READY);
+ p54spi_sleep(priv);
+
+out:
+ if (FREE_AFTER_TX(skb))
+ p54_free_skb(priv->hw, skb);
+ return ret;
+}
+
+static int p54spi_wq_tx(struct p54s_priv *priv)
+{
+ struct p54s_tx_info *entry;
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *info;
+ struct p54_tx_info *minfo;
+ struct p54s_tx_info *dinfo;
+ int ret = 0;
+
+ spin_lock_bh(&priv->tx_lock);
+
+ while (!list_empty(&priv->tx_pending)) {
+ entry = list_entry(priv->tx_pending.next,
+ struct p54s_tx_info, tx_list);
+
+ list_del_init(&entry->tx_list);
+
+ spin_unlock_bh(&priv->tx_lock);
+
+ dinfo = container_of((void *) entry, struct p54s_tx_info,
+ tx_list);
+ minfo = container_of((void *) dinfo, struct p54_tx_info,
+ data);
+ info = container_of((void *) minfo, struct ieee80211_tx_info,
+ rate_driver_data);
+ skb = container_of((void *) info, struct sk_buff, cb);
+
+ ret = p54spi_tx_frame(priv, skb);
+
+ spin_lock_bh(&priv->tx_lock);
+
+ if (ret < 0) {
+ p54_free_skb(priv->hw, skb);
+ goto out;
+ }
+ }
+
+out:
+ spin_unlock_bh(&priv->tx_lock);
+ return ret;
+}
+
+static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
+{
+ struct p54s_priv *priv = dev->priv;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data;
+ struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data;
+
+ BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data)));
+
+ spin_lock_bh(&priv->tx_lock);
+ list_add_tail(&di->tx_list, &priv->tx_pending);
+ spin_unlock_bh(&priv->tx_lock);
+
+ queue_work(priv->hw->workqueue, &priv->work);
+}
+
+static void p54spi_work(struct work_struct *work)
+{
+ struct p54s_priv *priv = container_of(work, struct p54s_priv, work);
+ u32 ints;
+ int ret;
+
+ mutex_lock(&priv->mutex);
+
+ if (priv->fw_state == FW_STATE_OFF &&
+ priv->fw_state == FW_STATE_RESET)
+ goto out;
+
+ ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+
+ if (ints & SPI_HOST_INT_READY) {
+ p54spi_int_ready(priv);
+ p54spi_int_ack(priv, SPI_HOST_INT_READY);
+ }
+
+ if (priv->fw_state != FW_STATE_READY)
+ goto out;
+
+ if (ints & SPI_HOST_INT_UPDATE) {
+ p54spi_int_ack(priv, SPI_HOST_INT_UPDATE);
+ ret = p54spi_rx(priv);
+ if (ret < 0)
+ goto out;
+ }
+ if (ints & SPI_HOST_INT_SW_UPDATE) {
+ p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE);
+ ret = p54spi_rx(priv);
+ if (ret < 0)
+ goto out;
+ }
+
+ ret = p54spi_wq_tx(priv);
+ if (ret < 0)
+ goto out;
+
+ ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+
+out:
+ mutex_unlock(&priv->mutex);
+}
+
+static int p54spi_op_start(struct ieee80211_hw *dev)
+{
+ struct p54s_priv *priv = dev->priv;
+ unsigned long timeout;
+ int ret = 0;
+
+ if (mutex_lock_interruptible(&priv->mutex)) {
+ ret = -EINTR;
+ goto out;
+ }
+
+ priv->fw_state = FW_STATE_BOOTING;
+
+ p54spi_power_on(priv);
+
+ ret = p54spi_upload_firmware(dev);
+ if (ret < 0) {
+ p54spi_power_off(priv);
+ goto out_unlock;
+ }
+
+ mutex_unlock(&priv->mutex);
+
+ timeout = msecs_to_jiffies(2000);
+ timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp,
+ timeout);
+ if (!timeout) {
+ dev_err(&priv->spi->dev, "firmware boot failed");
+ p54spi_power_off(priv);
+ ret = -1;
+ goto out;
+ }
+
+ if (mutex_lock_interruptible(&priv->mutex)) {
+ ret = -EINTR;
+ p54spi_power_off(priv);
+ goto out;
+ }
+
+ WARN_ON(priv->fw_state != FW_STATE_READY);
+
+out_unlock:
+ mutex_unlock(&priv->mutex);
+
+out:
+ return ret;
+}
+
+static void p54spi_op_stop(struct ieee80211_hw *dev)
+{
+ struct p54s_priv *priv = dev->priv;
+
+ if (mutex_lock_interruptible(&priv->mutex)) {
+ /* FIXME: how to handle this error? */
+ return;
+ }
+
+ WARN_ON(priv->fw_state != FW_STATE_READY);
+
+ cancel_work_sync(&priv->work);
+
+ p54spi_power_off(priv);
+ spin_lock_bh(&priv->tx_lock);
+ INIT_LIST_HEAD(&priv->tx_pending);
+ spin_unlock_bh(&priv->tx_lock);
+
+ priv->fw_state = FW_STATE_OFF;
+ mutex_unlock(&priv->mutex);
+}
+
+static int __devinit p54spi_probe(struct spi_device *spi)
+{
+ struct p54s_priv *priv = NULL;
+ struct ieee80211_hw *hw;
+ int ret = -EINVAL;
+
+ hw = p54_init_common(sizeof(*priv));
+ if (!hw) {
+ dev_err(&priv->spi->dev, "could not alloc ieee80211_hw");
+ return -ENOMEM;
+ }
+
+ priv = hw->priv;
+ priv->hw = hw;
+ dev_set_drvdata(&spi->dev, priv);
+ priv->spi = spi;
+
+ priv->config = omap_get_config(OMAP_TAG_WLAN_CX3110X,
+ struct omap_wlan_cx3110x_config);
+
+ spi->bits_per_word = 16;
+ spi->max_speed_hz = 24000000;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(&priv->spi->dev, "spi_setup failed");
+ goto err_free_common;
+ }
+
+ ret = gpio_request(priv->config->power_gpio, "p54spi power");
+ if (ret < 0) {
+ dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
+ goto err_free_common;
+ }
+
+ ret = gpio_request(priv->config->irq_gpio, "p54spi irq");
+ if (ret < 0) {
+ dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
+ goto err_free_common;
+ }
+
+ gpio_direction_output(priv->config->power_gpio, 0);
+ gpio_direction_input(priv->config->irq_gpio);
+
+ ret = request_irq(OMAP_GPIO_IRQ(priv->config->irq_gpio),
+ p54spi_interrupt, IRQF_DISABLED, "p54spi",
+ priv->spi);
+ if (ret < 0) {
+ dev_err(&priv->spi->dev, "request_irq() failed");
+ goto err_free_common;
+ }
+
+ set_irq_type(gpio_to_irq(priv->config->irq_gpio),
+ IRQ_TYPE_EDGE_RISING);
+
+ disable_irq(gpio_to_irq(priv->config->irq_gpio));
+
+ INIT_WORK(&priv->work, p54spi_work);
+ init_completion(&priv->fw_comp);
+ INIT_LIST_HEAD(&priv->tx_pending);
+ mutex_init(&priv->mutex);
+ SET_IEEE80211_DEV(hw, &spi->dev);
+ priv->common.open = p54spi_op_start;
+ priv->common.stop = p54spi_op_stop;
+ priv->common.tx = p54spi_op_tx;
+
+ ret = p54spi_request_firmware(hw);
+ if (ret < 0)
+ goto err_free_common;
+
+ ret = p54spi_request_eeprom(hw);
+ if (ret)
+ goto err_free_common;
+
+ ret = ieee80211_register_hw(hw);
+ if (ret) {
+ dev_err(&priv->spi->dev, "unable to register "
+ "mac80211 hw: %d", ret);
+ goto err_free_common;
+ }
+
+ dev_info(&priv->spi->dev, "device is bound to %s\n",
+ wiphy_name(hw->wiphy));
+ return 0;
+
+err_free_common:
+ p54_free_common(priv->hw);
+ return ret;
+}
+
+static int __devexit p54spi_remove(struct spi_device *spi)
+{
+ struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
+
+ ieee80211_unregister_hw(priv->hw);
+
+ free_irq(gpio_to_irq(priv->config->irq_gpio), spi);
+
+ gpio_free(priv->config->power_gpio);
+ gpio_free(priv->config->irq_gpio);
+ release_firmware(priv->firmware);
+
+ mutex_destroy(&priv->mutex);
+
+ p54_free_common(priv->hw);
+ ieee80211_free_hw(priv->hw);
+
+ return 0;
+}
+
+
+static struct spi_driver p54spi_driver = {
+ .driver = {
+ /* use cx3110x name because board-n800.c uses that for the
+ * SPI port */
+ .name = "cx3110x",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+
+ .probe = p54spi_probe,
+ .remove = __devexit_p(p54spi_remove),
+};
+
+static int __init p54spi_init(void)
+{
+ int ret;
+
+ ret = spi_register_driver(&p54spi_driver);
+ if (ret < 0) {
+ printk(KERN_ERR "failed to register SPI driver: %d", ret);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void __exit p54spi_exit(void)
+{
+ spi_unregister_driver(&p54spi_driver);
+}
+
+module_init(p54spi_init);
+module_exit(p54spi_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
diff --git a/drivers/net/wireless/p54/p54spi.h b/drivers/net/wireless/p54/p54spi.h
new file mode 100644
index 00000000000..5013ebc8712
--- /dev/null
+++ b/drivers/net/wireless/p54/p54spi.h
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de>
+ *
+ * This driver is a port from stlc45xx:
+ * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef P54SPI_H
+#define P54SPI_H
+
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <net/mac80211.h>
+#include <mach/board.h>
+
+#include "p54.h"
+
+/* Bit 15 is read/write bit; ON = READ, OFF = WRITE */
+#define SPI_ADRS_READ_BIT_15 0x8000
+
+#define SPI_ADRS_ARM_INTERRUPTS 0x00
+#define SPI_ADRS_ARM_INT_EN 0x04
+
+#define SPI_ADRS_HOST_INTERRUPTS 0x08
+#define SPI_ADRS_HOST_INT_EN 0x0c
+#define SPI_ADRS_HOST_INT_ACK 0x10
+
+#define SPI_ADRS_GEN_PURP_1 0x14
+#define SPI_ADRS_GEN_PURP_2 0x18
+
+#define SPI_ADRS_DEV_CTRL_STAT 0x26 /* high word */
+
+#define SPI_ADRS_DMA_DATA 0x28
+
+#define SPI_ADRS_DMA_WRITE_CTRL 0x2c
+#define SPI_ADRS_DMA_WRITE_LEN 0x2e
+#define SPI_ADRS_DMA_WRITE_BASE 0x30
+
+#define SPI_ADRS_DMA_READ_CTRL 0x34
+#define SPI_ADRS_DMA_READ_LEN 0x36
+#define SPI_ADRS_DMA_READ_BASE 0x38
+
+#define SPI_CTRL_STAT_HOST_OVERRIDE 0x8000
+#define SPI_CTRL_STAT_START_HALTED 0x4000
+#define SPI_CTRL_STAT_RAM_BOOT 0x2000
+#define SPI_CTRL_STAT_HOST_RESET 0x1000
+#define SPI_CTRL_STAT_HOST_CPU_EN 0x0800
+
+#define SPI_DMA_WRITE_CTRL_ENABLE 0x0001
+#define SPI_DMA_READ_CTRL_ENABLE 0x0001
+#define HOST_ALLOWED (1 << 7)
+
+#define SPI_TIMEOUT 100 /* msec */
+
+#define SPI_MAX_TX_PACKETS 32
+
+#define SPI_MAX_PACKET_SIZE 32767
+
+#define SPI_TARGET_INT_WAKEUP 0x00000001
+#define SPI_TARGET_INT_SLEEP 0x00000002
+#define SPI_TARGET_INT_RDDONE 0x00000004
+
+#define SPI_TARGET_INT_CTS 0x00004000
+#define SPI_TARGET_INT_DR 0x00008000
+
+#define SPI_HOST_INT_READY 0x00000001
+#define SPI_HOST_INT_WR_READY 0x00000002
+#define SPI_HOST_INT_SW_UPDATE 0x00000004
+#define SPI_HOST_INT_UPDATE 0x10000000
+
+/* clear to send */
+#define SPI_HOST_INT_CR 0x00004000
+
+/* data ready */
+#define SPI_HOST_INT_DR 0x00008000
+
+#define SPI_HOST_INTS_DEFAULT \
+ (SPI_HOST_INT_READY | SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)
+
+#define TARGET_BOOT_SLEEP 50
+
+struct p54s_dma_regs {
+ __le16 cmd;
+ __le16 len;
+ __le32 addr;
+} __attribute__ ((packed));
+
+struct p54s_tx_info {
+ struct list_head tx_list;
+};
+
+struct p54s_priv {
+ /* p54_common has to be the first entry */
+ struct p54_common common;
+ struct ieee80211_hw *hw;
+ struct spi_device *spi;
+ const struct omap_wlan_cx3110x_config *config;
+
+ struct work_struct work;
+
+ struct mutex mutex;
+ struct completion fw_comp;
+
+ spinlock_t tx_lock;
+
+ /* protected by tx_lock */
+ struct list_head tx_pending;
+
+ enum fw_state fw_state;
+ const struct firmware *firmware;
+};
+
+#endif /* P54SPI_H */