diff options
| -rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 5 | ||||
| -rw-r--r-- | sound/pci/ice1712/Makefile | 2 | ||||
| -rw-r--r-- | sound/pci/ice1712/ice1712.h | 6 | ||||
| -rw-r--r-- | sound/pci/ice1712/ice1724.c | 3 | ||||
| -rw-r--r-- | sound/pci/ice1712/se.c | 700 | ||||
| -rw-r--r-- | sound/pci/ice1712/se.h | 15 |
6 files changed, 729 insertions, 2 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 7b064f2c2a6..69ab91c991a 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1157,11 +1157,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. * Chaintech 9CJS * Chaintech AV-710 * Shuttle SN25P + * Onkyo SE-90PCI + * Onkyo SE-200PCI model - Use the given board model, one of the following: revo51, revo71, amp2000, prodigy71, prodigy71lt, prodigy192, aureon51, aureon71, universe, ap192, - k8x800, phase22, phase28, ms300, av710 + k8x800, phase22, phase28, ms300, av710, se200pci, + se90pci This module supports multiple cards and autoprobe. diff --git a/sound/pci/ice1712/Makefile b/sound/pci/ice1712/Makefile index 65ce66adba5..ee86a1de72f 100644 --- a/sound/pci/ice1712/Makefile +++ b/sound/pci/ice1712/Makefile @@ -5,7 +5,7 @@ snd-ice17xx-ak4xxx-objs := ak4xxx.o snd-ice1712-objs := ice1712.o delta.o hoontech.o ews.o -snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o juli.o phase.o wtm.o +snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o juli.o phase.o wtm.o se.o # Toplevel Module Dependency obj-$(CONFIG_SND_ICE1712) += snd-ice1712.o snd-ice17xx-ak4xxx.o diff --git a/sound/pci/ice1712/ice1712.h b/sound/pci/ice1712/ice1712.h index 58640afa540..3c3cac3dc08 100644 --- a/sound/pci/ice1712/ice1712.h +++ b/sound/pci/ice1712/ice1712.h @@ -400,6 +400,12 @@ struct snd_ice1712 { struct { struct ak4114 *ak4114; } prodigy192; + struct { + struct { + unsigned char ch1, ch2; + } vol[8]; + } se; + } spec; }; diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index 0b0bbb0d96b..357bdbe21c8 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -51,6 +51,7 @@ #include "juli.h" #include "phase.h" #include "wtm.h" +#include "se.h" MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>"); MODULE_DESCRIPTION("VIA ICEnsemble ICE1724/1720 (Envy24HT/PT)"); @@ -65,6 +66,7 @@ MODULE_SUPPORTED_DEVICE("{" JULI_DEVICE_DESC PHASE_DEVICE_DESC WTM_DEVICE_DESC + SE_DEVICE_DESC "{VIA,VT1720}," "{VIA,VT1724}," "{ICEnsemble,Generic ICE1724}," @@ -1933,6 +1935,7 @@ static struct snd_ice1712_card_info *card_tables[] __devinitdata = { snd_vt1724_juli_cards, snd_vt1724_phase_cards, snd_vt1724_wtm_cards, + snd_vt1724_se_cards, NULL, }; diff --git a/sound/pci/ice1712/se.c b/sound/pci/ice1712/se.c new file mode 100644 index 00000000000..ebfe2454a08 --- /dev/null +++ b/sound/pci/ice1712/se.c @@ -0,0 +1,700 @@ +/* + * ALSA driver for ICEnsemble VT1724 (Envy24HT) + * + * Lowlevel functions for ONKYO WAVIO SE-90PCI and SE-200PCI + * + * Copyright (c) 2007 Shin-ya Okada sh_okada(at)d4.dion.ne.jp + * (at) -> @ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <sound/driver.h> +#include <asm/io.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/tlv.h> + +#include "ice1712.h" +#include "envy24ht.h" +#include "se.h" + + +/****************************************************************************/ +/* ONKYO WAVIO SE-200PCI */ +/****************************************************************************/ +/* + * system configuration ICE_EEP2_SYSCONF=0x4b + * XIN1 49.152MHz + * not have UART + * one stereo ADC and a S/PDIF receiver connected + * four stereo DACs connected + * + * AC-Link configuration ICE_EEP2_ACLINK=0x80 + * use I2C, not use AC97 + * + * I2S converters feature ICE_EEP2_I2S=0x78 + * I2S codec has no volume/mute control feature + * I2S codec supports 96KHz and 192KHz + * I2S codec 24bits + * + * S/PDIF configuration ICE_EEP2_SPDIF=0xc3 + * Enable integrated S/PDIF transmitter + * internal S/PDIF out implemented + * S/PDIF is stereo + * External S/PDIF out implemented + * + * + * ** connected chips ** + * + * WM8740 + * A 2ch-DAC of main outputs. + * It setuped as I2S mode by wire, so no way to setup from software. + * The sample-rate are automatically changed. + * ML/I2S (28pin) --------+ + * MC/DM1 (27pin) -- 5V | + * MD/DM0 (26pin) -- GND | + * MUTEB (25pin) -- NC | + * MODE (24pin) -- GND | + * CSBIW (23pin) --------+ + * | + * RSTB (22pin) --R(1K)-+ + * Probably it reduce the noise from the control line. + * + * WM8766 + * A 6ch-DAC for surrounds. + * It's control wire was connected to GPIOxx (3-wire serial interface) + * ML/I2S (11pin) -- GPIO18 + * MC/IWL (12pin) -- GPIO17 + * MD/DM (13pin) -- GPIO16 + * MUTE (14pin) -- GPIO01 + * + * WM8776 + * A 2ch-ADC(with 10ch-selector) plus 2ch-DAC. + * It's control wire was connected to SDA/SCLK (2-wire serial interface) + * MODE (16pin) -- R(1K) -- GND + * CE (17pin) -- R(1K) -- GND 2-wire mode (address=0x34) + * DI (18pin) -- SDA + * CL (19pin) -- SCLK + * + * + * ** output pins and device names ** + * + * 7.1ch name -- output connector color -- device (-D option) + * + * FRONT 2ch -- green -- plughw:0,0 + * CENTER(Lch) SUBWOOFER(Rch) -- black -- plughw:0,2,0 + * SURROUND 2ch -- orange -- plughw:0,2,1 + * SURROUND BACK 2ch -- white -- plughw:0,2,2 + * + */ + + +/****************************************************************************/ +/* WM8740 interface */ +/****************************************************************************/ + +static void __devinit se200pci_WM8740_init(struct snd_ice1712 *ice) +{ + /* nothing to do */ +} + + +static void se200pci_WM8740_set_pro_rate(struct snd_ice1712 *ice, + unsigned int rate) +{ + /* nothing to do */ +} + + +/****************************************************************************/ +/* WM8766 interface */ +/****************************************************************************/ + +static void se200pci_WM8766_write(struct snd_ice1712 *ice, + unsigned int addr, unsigned int data) +{ + unsigned int st; + unsigned int bits; + int i; + const unsigned int DATA = 0x010000; + const unsigned int CLOCK = 0x020000; + const unsigned int LOAD = 0x040000; + const unsigned int ALL_MASK = (DATA | CLOCK | LOAD); + + snd_ice1712_save_gpio_status(ice); + + st = ((addr & 0x7f) << 9) | (data & 0x1ff); + snd_ice1712_gpio_set_dir(ice, ice->gpio.direction | ALL_MASK); + snd_ice1712_gpio_set_mask(ice, ice->gpio.write_mask & ~ALL_MASK); + bits = snd_ice1712_gpio_read(ice) & ~ALL_MASK; + + snd_ice1712_gpio_write(ice, bits); + for (i = 0; i < 16; i++) { + udelay(1); + bits &= ~CLOCK; + st = (st << 1); + if (st & 0x10000) + bits |= DATA; + else + bits &= ~DATA; + + snd_ice1712_gpio_write(ice, bits); + + udelay(1); + bits |= CLOCK; + snd_ice1712_gpio_write(ice, bits); + } + + udelay(1); + bits |= LOAD; + snd_ice1712_gpio_write(ice, bits); + + udelay(1); + bits |= (DATA | CLOCK); + snd_ice1712_gpio_write(ice, bits); + + snd_ice1712_restore_gpio_status(ice); +} + +static void se200pci_WM8766_set_volume(struct snd_ice1712 *ice, int ch, + unsigned int vol1, unsigned int vol2) +{ + switch (ch) { + case 0: + se200pci_WM8766_write(ice, 0x000, vol1); + se200pci_WM8766_write(ice, 0x001, vol2 | 0x100); + break; + case 1: + se200pci_WM8766_write(ice, 0x004, vol1); + se200pci_WM8766_write(ice, 0x005, vol2 | 0x100); + break; + case 2: + se200pci_WM8766_write(ice, 0x006, vol1); + se200pci_WM8766_write(ice, 0x007, vol2 | 0x100); + break; + } +} + +static void __devinit se200pci_WM8766_init(struct snd_ice1712 *ice) +{ + se200pci_WM8766_write(ice, 0x1f, 0x000); /* RESET ALL */ + udelay(10); + + se200pci_WM8766_set_volume(ice, 0, 0, 0); /* volume L=0 R=0 */ + se200pci_WM8766_set_volume(ice, 1, 0, 0); /* volume L=0 R=0 */ + se200pci_WM8766_set_volume(ice, 2, 0, 0); /* volume L=0 R=0 */ + + se200pci_WM8766_write(ice, 0x03, 0x022); /* serial mode I2S-24bits */ + se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */ + se200pci_WM8766_write(ice, 0x12, 0x000); /* MDP=0 */ + se200pci_WM8766_write(ice, 0x15, 0x000); /* MDP=0 */ + se200pci_WM8766_write(ice, 0x09, 0x000); /* demp=off mute=off */ + + se200pci_WM8766_write(ice, 0x02, 0x124); /* ch-assign L=L R=R RESET */ + se200pci_WM8766_write(ice, 0x02, 0x120); /* ch-assign L=L R=R */ +} + +static void se200pci_WM8766_set_pro_rate(struct snd_ice1712 *ice, + unsigned int rate) +{ + if (rate > 96000) + se200pci_WM8766_write(ice, 0x0a, 0x000); /* MCLK=128fs */ + else + se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */ +} + + +/****************************************************************************/ +/* WM8776 interface */ +/****************************************************************************/ + +static void se200pci_WM8776_write(struct snd_ice1712 *ice, + unsigned int addr, unsigned int data) +{ + unsigned int val; + + val = (addr << 9) | data; + snd_vt1724_write_i2c(ice, 0x34, val >> 8, val & 0xff); +} + + +static void se200pci_WM8776_set_output_volume(struct snd_ice1712 *ice, + unsigned int vol1, unsigned int vol2) +{ + se200pci_WM8776_write(ice, 0x03, vol1); + se200pci_WM8776_write(ice, 0x04, vol2 | 0x100); +} + +static void se200pci_WM8776_set_input_volume(struct snd_ice1712 *ice, + unsigned int vol1, unsigned int vol2) +{ + se200pci_WM8776_write(ice, 0x0e, vol1); + se200pci_WM8776_write(ice, 0x0f, vol2 | 0x100); +} + +static const char *se200pci_sel[] = { + "LINE-IN", "CD-IN", "MIC-IN", "ALL-MIX", NULL +}; + +static void se200pci_WM8776_set_input_selector(struct snd_ice1712 *ice, + unsigned int sel) +{ + static unsigned char vals[] = { + /* LINE, CD, MIC, ALL, GND */ + 0x10, 0x04, 0x08, 0x1c, 0x03 + }; + if (sel > 4) + sel = 4; + se200pci_WM8776_write(ice, 0x15, vals[sel]); +} + +static void se200pci_WM8776_set_afl(struct snd_ice1712 *ice, unsigned int afl) +{ + /* AFL -- After Fader Listening */ + if (afl) + se200pci_WM8776_write(ice, 0x16, 0x005); + else + se200pci_WM8776_write(ice, 0x16, 0x001); +} + +static const char *se200pci_agc[] = { + "Off", "LimiterMode", "ALCMode", NULL +}; + +static void se200pci_WM8776_set_agc(struct snd_ice1712 *ice, unsigned int agc) +{ + /* AGC -- Auto Gain Control of the input */ + switch (agc) { + case 0: + se200pci_WM8776_write(ice, 0x11, 0x000); /* Off */ + break; + case 1: + se200pci_WM8776_write(ice, 0x10, 0x07b); + se200pci_WM8776_write(ice, 0x11, 0x100); /* LimiterMode */ + break; + case 2: + se200pci_WM8776_write(ice, 0x10, 0x1fb); + se200pci_WM8776_write(ice, 0x11, 0x100); /* ALCMode */ + break; + } +} + +static void __devinit se200pci_WM8776_init(struct snd_ice1712 *ice) +{ + int i; + static unsigned short __devinitdata default_values[] = { + 0x100, 0x100, 0x100, + 0x100, 0x100, 0x100, + 0x000, 0x090, 0x000, 0x000, + 0x022, 0x022, 0x022, + 0x008, 0x0cf, 0x0cf, 0x07b, 0x000, + 0x032, 0x000, 0x0a6, 0x001, 0x001 + }; + + se200pci_WM8776_write(ice, 0x17, 0x000); /* reset all */ + /* ADC and DAC interface is I2S 24bits mode */ + /* The sample-rate are automatically changed */ + udelay(10); + /* BUT my board can not do reset all, so I load all by manually. */ + for (i = 0; i < ARRAY_SIZE(default_values); i++) + se200pci_WM8776_write(ice, i, default_values[i]); + + se200pci_WM8776_set_input_selector(ice, 0); + se200pci_WM8776_set_afl(ice, 0); + se200pci_WM8776_set_agc(ice, 0); + se200pci_WM8776_set_input_volume(ice, 0, 0); + se200pci_WM8776_set_output_volume(ice, 0, 0); + + /* head phone mute and power down */ + se200pci_WM8776_write(ice, 0x00, 0); + se200pci_WM8776_write(ice, 0x01, 0); + se200pci_WM8776_write(ice, 0x02, 0x100); + se200pci_WM8776_write(ice, 0x0d, 0x080); +} + +static void se200pci_WM8776_set_pro_rate(struct snd_ice1712 *ice, + unsigned int rate) +{ + /* nothing to do */ +} + + +/****************************************************************************/ +/* runtime interface */ +/****************************************************************************/ + +static void se200pci_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate) +{ + se200pci_WM8740_set_pro_rate(ice, rate); + se200pci_WM8766_set_pro_rate(ice, rate); + se200pci_WM8776_set_pro_rate(ice, rate); +} + +struct se200pci_control { + char *name; + enum { + WM8766, + WM8776in, + WM8776out, + WM8776sel, + WM8776agc, + WM8776afl + } target; + enum { VOLUME1, VOLUME2, BOOLEAN, ENUM } type; + int ch; + const char **member; + const char *comment; +}; + +static const struct se200pci_control se200pci_cont[] = { + { + .name = "Front Playback Volume", + .target = WM8776out, + .type = VOLUME1, + .comment = "Front(green)" + }, + { + .name = "Side Playback Volume", + .target = WM8766, + .type = VOLUME1, + .ch = 1, + .comment = "Surround(orange)" + }, + { + .name = "Surround Playback Volume", + .target = WM8766, + .type = VOLUME1, + .ch = 2, + .comment = "SurroundBack(white)" + }, + { + .name = "CLFE Playback Volume", + .target = WM8766, + .type = VOLUME1, + .ch = 0, + .comment = "Center(Lch)&SubWoofer(Rch)(black)" + }, + { + .name = "Capture Volume", + .target = WM8776in, + .type = VOLUME2 + }, + { + .name = "Capture Select", + .target = WM8776sel, + .type = ENUM, + .member = se200pci_sel + }, + { + .name = "AGC Capture Mode", + .target = WM8776agc, + .type = ENUM, + .member = se200pci_agc + }, + { + .name = "AFL Bypass Playback Switch", + .target = WM8776afl, + .type = BOOLEAN + } +}; + +static int se200pci_cont_info(struct snd_kcontrol *kc, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_ice1712 *ice; + int n; + int c; + const char **member; + + ice = snd_kcontrol_chip(kc); + n = kc->private_value; + + if (se200pci_cont[n].type == VOLUME1 || + se200pci_cont[n].type == VOLUME2) { + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; /* mute */ + uinfo->value.integer.max = 0xff; /* 0dB */ + + } else if (se200pci_cont[n].type == BOOLEAN) { + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + + } else if (se200pci_cont[n].type == ENUM) { + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + member = se200pci_cont[n].member; + if (member == NULL) + return -EINVAL; + for (c = 0; member[c]; c++) + ; + + uinfo->count = 1; + uinfo->value.enumerated.items = c; + if (uinfo->value.enumerated.item >= c) + uinfo->value.enumerated.item = c - 1; + strcpy(uinfo->value.enumerated.name, + member[uinfo->value.enumerated.item]); + } + + return 0; +} + +static int se200pci_cont_get(struct snd_kcontrol *kc, + struct snd_ctl_elem_value *uc) +{ + struct snd_ice1712 *ice; + int n; + + ice = snd_kcontrol_chip(kc); + n = kc->private_value; + if (se200pci_cont[n].type == VOLUME1 || + se200pci_cont[n].type == VOLUME2) { + uc->value.integer.value[0] = ice->spec.se.vol[n].ch1; + uc->value.integer.value[1] = ice->spec.se.vol[n].ch2; + + } else if (se200pci_cont[n].type == BOOLEAN || + se200pci_cont[n].type == ENUM) + uc->value.integer.value[0] = ice->spec.se.vol[n].ch1; + + return 0; +} + +static int se200pci_cont_put(struct snd_kcontrol *kc, + struct snd_ctl_elem_value *uc) +{ + struct snd_ice1712 *ice; + int n; + unsigned int vol1, vol2; + int changed; + + ice = snd_kcontrol_chip(kc); + n = kc->private_value; + + changed = 0; + vol1 = 0; vol2 = 0; + if (se200pci_cont[n].type == VOLUME1 || + se200pci_cont[n].type == VOLUME2) { + vol1 = uc->value.integer.value[0]; + vol2 = uc->value.integer.value[1]; + if (ice->spec.se.vol[n].ch1 != vol1) + changed = 1; + if (ice->spec.se.vol[n].ch2 != vol2) + changed = 1; + ice->spec.se.vol[n].ch1 = vol1; + ice->spec.se.vol[n].ch2 = vol2; + + } else if (se200pci_cont[n].type == BOOLEAN || + se200pci_cont[n].type == ENUM) { + vol1 = uc->value.integer.value[0]; + if (ice->spec.se.vol[n].ch1 != vol1) + changed = 1; + ice->spec.se.vol[n].ch1 = vol1; + } + + switch (se200pci_cont[n].target) { + case WM8766: + se200pci_WM8766_set_volume(ice, + se200pci_cont[n].ch, vol1, vol2); + break; + + case WM8776in: + se200pci_WM8776_set_input_volume(ice, vol1, vol2); + break; + + case WM8776out: + se200pci_WM8776_set_output_volume(ice, vol1, vol2); + break; + + case WM8776sel: + se200pci_WM8776_set_input_selector(ice, vol1); + break; + + case WM8776agc: + se200pci_WM8776_set_agc(ice, vol1); + break; + + case WM8776afl: + se200pci_WM8776_set_afl(ice, vol1); + break; + + default: + break; + } + + return changed; +} + +static const DECLARE_TLV_DB_SCALE(db_scale_gain1, -12750, 50, 1); +static const DECLARE_TLV_DB_SCALE(db_scale_gain2, -10350, 50, 1); + +static int __devinit se200pci_add_controls(struct snd_ice1712 *ice) +{ + int i; + struct snd_kcontrol_new cont; + int err; + + memset(&cont, 0, sizeof(cont)); + cont.iface = SNDRV_CTL_ELEM_IFACE_MIXER; + cont.info = se200pci_cont_info; + cont.get = se200pci_cont_get; + cont.put = se200pci_cont_put; + for (i = 0; i < ARRAY_SIZE(se200pci_cont); i++) { + cont.private_value = i; + cont.name = se200pci_cont[i].name; + cont.access = SNDRV_CTL_ELEM_ACCESS_READWRITE; + cont.tlv.p = NULL; + if (se200pci_cont[i].type == VOLUME1 || + se200pci_cont[i].type == VOLUME2) { + + cont.access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ; + + if (se200pci_cont[i].type == VOLUME1) + cont.tlv.p = db_scale_gain1; + else + cont.tlv.p = db_scale_gain2; + } + err = snd_ctl_add(ice->card, snd_ctl_new1(&cont, ice)); + if (err < 0) + return err; + } + + return 0; +} + + +/****************************************************************************/ +/* ONKYO WAVIO SE-90PCI */ +/****************************************************************************/ +/* + * system configuration ICE_EEP2_SYSCONF=0x4b + * AC-Link configuration ICE_EEP2_ACLINK=0x80 + * I2S converters feature ICE_EEP2_I2S=0x78 + * S/PDIF configuration ICE_EEP2_SPDIF=0xc3 + * + * ** connected chip ** + * + * WM8716 + * A 2ch-DAC of main outputs. + * It setuped as I2S mode by wire, so no way to setup from software. + * ML/I2S (28pin) -- +5V + * MC/DM1 (27pin) -- GND + * MC/DM0 (26pin) -- GND + * MUTEB (25pin) -- open (internal pull-up) + * MODE (24pin) -- GND + * CSBIWO (23pin) -- +5V + * + */ + + /* Nothing to do for this chip. */ + + +/****************************************************************************/ +/* probe/initialize/setup */ +/****************************************************************************/ + +static int __devinit se_init(struct snd_ice1712 *ice) +{ + if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE90PCI) { + ice->num_total_dacs = 2; + ice->num_total_adcs = 0; + ice->vt1720 = 1; + return 0; + + } else if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI) { + ice->num_total_dacs = 8; + ice->num_total_adcs = 2; + se200pci_WM8740_init(ice); + se200pci_WM8766_init(ice); + se200pci_WM8776_init(ice); + ice->gpio.set_pro_rate = se200pci_set_pro_rate; + return 0; + } + + return -ENOENT; +} + +static int __devinit se_add_controls(struct snd_ice1712 *ice) +{ + int err; + + err = 0; + /* nothing to do for VT1724_SUBDEVICE_SE90PCI */ + if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI) + err = se200pci_add_controls(ice); + + return err; +} + + +/****************************************************************************/ +/* entry point */ +/****************************************************************************/ + +static unsigned char se200pci_eeprom[] __devinitdata = { + [ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */ + [ICE_EEP2_ACLINK] = 0x80, /* I2S */ + [ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */ + [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */ + + [ICE_EEP2_GPIO_DIR] = 0x02, /* WM8766 mute 1=output */ + [ICE_EEP2_GPIO_DIR1] = 0x00, /* not used */ + [ICE_EEP2_GPIO_DIR2] = 0x07, /* WM8766 ML/MC/MD 1=output */ + + [ICE_EEP2_GPIO_MASK] = 0x00, /* 0=writable */ + [ICE_EEP2_GPIO_MASK1] = 0x00, /* 0=writable */ + [ICE_EEP2_GPIO_MASK2] = 0x00, /* 0=writable */ + + [ICE_EEP2_GPIO_STATE] = 0x00, /* WM8766 mute=0 */ + [ICE_EEP2_GPIO_STATE1] = 0x00, /* not used */ + [ICE_EEP2_GPIO_STATE2] = 0x07, /* WM8766 ML/MC/MD */ +}; + +static unsigned char se90pci_eeprom[] __devinitdata = { + [ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */ + [ICE_EEP2_ACLINK] = 0x80, /* I2S */ + [ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */ + [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */ + + /* ALL GPIO bits are in input mode */ +}; + +struct snd_ice1712_card_info snd_vt1724_se_cards[] __devinitdata = { + { + .subvendor = VT1724_SUBDEVICE_SE200PCI, + .name = "ONKYO SE200PCI", + .model = "se200pci", + .chip_init = se_init, + .build_controls = se_add_controls, + .eeprom_size = sizeof(se200pci_eeprom), + .eeprom_data = se200pci_eeprom, + }, + { + .subvendor = VT1724_SUBDEVICE_SE90PCI, + .name = "ONKYO SE90PCI", + .model = "se90pci", + .chip_init = se_init, + .build_controls = se_add_controls, + .eeprom_size = sizeof(se90pci_eeprom), + .eeprom_data = se90pci_eeprom, + }, + {} /*terminator*/ +}; diff --git a/sound/pci/ice1712/se.h b/sound/pci/ice1712/se.h new file mode 100644 index 00000000000..0b0a9dabdcf --- /dev/null +++ b/sound/pci/ice1712/se.h @@ -0,0 +1,15 @@ +#ifndef __SOUND_SE_H +#define __SOUND_SE_H + +/* ID */ +#define SE_DEVICE_DESC \ + "{ONKYO INC,SE-90PCI},"\ + "{ONKYO INC,SE-200PCI}," + +#define VT1724_SUBDEVICE_SE90PCI 0xb161000 +#define VT1724_SUBDEVICE_SE200PCI 0xb160100 + +/* entry struct */ +extern struct snd_ice1712_card_info snd_vt1724_se_cards[]; + +#endif /* __SOUND_SE_H */ |