aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig62
-rw-r--r--arch/arm/Makefile2
-rw-r--r--arch/arm/configs/at91sam9rlek_defconfig957
-rw-r--r--arch/arm/configs/ks8695_defconfig880
-rw-r--r--arch/arm/configs/trizeps4_defconfig532
-rw-r--r--arch/arm/kernel/armksyms.c1
-rw-r--r--arch/arm/kernel/ecard.c35
-rw-r--r--arch/arm/kernel/stacktrace.c12
-rw-r--r--arch/arm/kernel/time.c2
-rw-r--r--arch/arm/mach-at91/Kconfig17
-rw-r--r--arch/arm/mach-at91/Makefile5
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c3
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c3
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c3
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c3
-rw-r--r--arch/arm/mach-at91/at91sam9rl.c341
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c630
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c3
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c204
-rw-r--r--arch/arm/mach-at91/generic.h2
-rw-r--r--arch/arm/mach-davinci/Kconfig23
-rw-r--r--arch/arm/mach-davinci/Makefile10
-rw-r--r--arch/arm/mach-davinci/Makefile.boot3
-rw-r--r--arch/arm/mach-davinci/board-evm.c131
-rw-r--r--arch/arm/mach-davinci/id.c94
-rw-r--r--arch/arm/mach-davinci/io.c51
-rw-r--r--arch/arm/mach-davinci/irq.c226
-rw-r--r--arch/arm/mach-davinci/psc.c113
-rw-r--r--arch/arm/mach-davinci/serial.c96
-rw-r--r--arch/arm/mach-davinci/time.c372
-rw-r--r--arch/arm/mach-ebsa110/io.c8
-rw-r--r--arch/arm/mach-iop13xx/Makefile1
-rw-r--r--arch/arm/mach-iop13xx/irq.c5
-rw-r--r--arch/arm/mach-iop13xx/msi.c194
-rw-r--r--arch/arm/mach-iop13xx/pci.c16
-rw-r--r--arch/arm/mach-ks8695/Kconfig13
-rw-r--r--arch/arm/mach-ks8695/Makefile15
-rw-r--r--arch/arm/mach-ks8695/Makefile.boot8
-rw-r--r--arch/arm/mach-ks8695/board-micrel.c60
-rw-r--r--arch/arm/mach-ks8695/cpu.c73
-rw-r--r--arch/arm/mach-ks8695/devices.c191
-rw-r--r--arch/arm/mach-ks8695/generic.h15
-rw-r--r--arch/arm/mach-ks8695/irq.c175
-rw-r--r--arch/arm/mach-ks8695/time.c114
-rw-r--r--arch/arm/mach-omap1/board-h2.c2
-rw-r--r--arch/arm/mach-omap1/pm.c11
-rw-r--r--arch/arm/mach-omap2/gpmc.c2
-rw-r--r--arch/arm/mach-omap2/mux.c33
-rw-r--r--arch/arm/mach-pnx4008/dma.c4
-rw-r--r--arch/arm/mach-pxa/trizeps4.c62
-rw-r--r--arch/arm/mach-s3c2410/Makefile2
-rw-r--r--arch/arm/mach-s3c2410/h1940-bluetooth.c142
-rw-r--r--arch/arm/mach-s3c2410/mach-h1940.c6
-rw-r--r--arch/arm/mach-s3c2443/clock.c4
-rw-r--r--arch/arm/mm/Kconfig10
-rw-r--r--arch/arm/plat-omap/dma.c4
-rw-r--r--arch/arm/plat-omap/mux.c19
-rw-r--r--arch/arm/tools/mach-types34
-rw-r--r--drivers/ata/pata_icside.c184
-rw-r--r--drivers/ide/arm/icside.c41
-rw-r--r--drivers/ide/arm/rapide.c5
-rw-r--r--drivers/net/arm/ether1.c6
-rw-r--r--drivers/net/arm/ether3.c6
-rw-r--r--drivers/net/arm/etherh.c17
-rw-r--r--drivers/scsi/arm/arxescsi.c12
-rw-r--r--drivers/scsi/arm/cumana_2.c16
-rw-r--r--drivers/scsi/arm/eesox.c16
-rw-r--r--drivers/scsi/arm/powertec.c16
-rw-r--r--drivers/serial/8250_acorn.c3
-rw-r--r--drivers/serial/Kconfig17
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/serial_ks8695.c657
-rw-r--r--drivers/usb/gadget/Kconfig2
-rw-r--r--include/asm-arm/arch-at91/at91sam9rl.h110
-rw-r--r--include/asm-arm/arch-at91/at91sam9rl_matrix.h96
-rw-r--r--include/asm-arm/arch-at91/cpu.h9
-rw-r--r--include/asm-arm/arch-at91/hardware.h19
-rw-r--r--include/asm-arm/arch-at91/io.h18
-rw-r--r--include/asm-arm/arch-at91/irqs.h1
-rw-r--r--include/asm-arm/arch-at91/timex.h5
-rw-r--r--include/asm-arm/arch-at91/uncompress.h2
-rw-r--r--include/asm-arm/arch-cl7500/entry-macro.S8
-rw-r--r--include/asm-arm/arch-davinci/common.h19
-rw-r--r--include/asm-arm/arch-davinci/debug-macro.S21
-rw-r--r--include/asm-arm/arch-davinci/dma.h16
-rw-r--r--include/asm-arm/arch-davinci/entry-macro.S32
-rw-r--r--include/asm-arm/arch-davinci/hardware.h14
-rw-r--r--include/asm-arm/arch-davinci/io.h79
-rw-r--r--include/asm-arm/arch-davinci/irqs.h105
-rw-r--r--include/asm-arm/arch-davinci/memory.h64
-rw-r--r--include/asm-arm/arch-davinci/psc.h76
-rw-r--r--include/asm-arm/arch-davinci/serial.h20
-rw-r--r--include/asm-arm/arch-davinci/system.h29
-rw-r--r--include/asm-arm/arch-davinci/timex.h17
-rw-r--r--include/asm-arm/arch-davinci/uncompress.h35
-rw-r--r--include/asm-arm/arch-davinci/vmalloc.h15
-rw-r--r--include/asm-arm/arch-ebsa110/entry-macro.S2
-rw-r--r--include/asm-arm/arch-ebsa285/entry-macro.S16
-rw-r--r--include/asm-arm/arch-iop13xx/io.h2
-rw-r--r--include/asm-arm/arch-iop13xx/iop13xx.h29
-rw-r--r--include/asm-arm/arch-iop13xx/irqs.h8
-rw-r--r--include/asm-arm/arch-iop13xx/msi.h11
-rw-r--r--include/asm-arm/arch-iop32x/io.h2
-rw-r--r--include/asm-arm/arch-iop33x/io.h2
-rw-r--r--include/asm-arm/arch-ks8695/debug-macro.S38
-rw-r--r--include/asm-arm/arch-ks8695/devices.h32
-rw-r--r--include/asm-arm/arch-ks8695/dma.h17
-rw-r--r--include/asm-arm/arch-ks8695/entry-macro.S53
-rw-r--r--include/asm-arm/arch-ks8695/hardware.h49
-rw-r--r--include/asm-arm/arch-ks8695/io.h19
-rw-r--r--include/asm-arm/arch-ks8695/irqs.h54
-rw-r--r--include/asm-arm/arch-ks8695/memory.h49
-rw-r--r--include/asm-arm/arch-ks8695/regs-gpio.h53
-rw-r--r--include/asm-arm/arch-ks8695/regs-hpna.h25
-rw-r--r--include/asm-arm/arch-ks8695/regs-irq.h41
-rw-r--r--include/asm-arm/arch-ks8695/regs-lan.h65
-rw-r--r--include/asm-arm/arch-ks8695/regs-mem.h89
-rw-r--r--include/asm-arm/arch-ks8695/regs-misc.h97
-rw-r--r--include/asm-arm/arch-ks8695/regs-pci.h53
-rw-r--r--include/asm-arm/arch-ks8695/regs-switch.h66
-rw-r--r--include/asm-arm/arch-ks8695/regs-sys.h34
-rw-r--r--include/asm-arm/arch-ks8695/regs-timer.h40
-rw-r--r--include/asm-arm/arch-ks8695/regs-uart.h92
-rw-r--r--include/asm-arm/arch-ks8695/regs-wan.h65
-rw-r--r--include/asm-arm/arch-ks8695/system.h48
-rw-r--r--include/asm-arm/arch-ks8695/timex.h20
-rw-r--r--include/asm-arm/arch-ks8695/uncompress.h37
-rw-r--r--include/asm-arm/arch-ks8695/vmalloc.h19
-rw-r--r--include/asm-arm/arch-omap/mux.h31
-rw-r--r--include/asm-arm/arch-realview/entry-macro.S2
-rw-r--r--include/asm-arm/arch-rpc/entry-macro.S8
-rw-r--r--include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h1
-rw-r--r--include/asm-arm/arch-sa1100/entry-macro.S8
-rw-r--r--include/asm-arm/arch-versatile/entry-macro.S2
-rw-r--r--include/asm-arm/ecard.h8
-rw-r--r--include/asm-arm/hardware/entry-macro-iomd.S28
-rw-r--r--include/asm-arm/sizes.h4
-rw-r--r--include/asm-avr32/arch-at32ap/cpu.h1
-rw-r--r--include/linux/serial_core.h4
139 files changed, 8624 insertions, 548 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d7c0984d4a8..e55bbd32dca 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -114,9 +114,6 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
-config GENERIC_BUST_SPINLOCK
- bool
-
config ARCH_MAY_HAVE_PC_FDC
bool
@@ -247,6 +244,15 @@ config ARCH_IMX
help
Support for Motorola's i.MX family of processors (MX1, MXL).
+config ARCH_IOP13XX
+ bool "IOP13xx-based"
+ depends on MMU
+ select PLAT_IOP
+ select PCI
+ select ARCH_SUPPORTS_MSI
+ help
+ Support for Intel's IOP13XX (XScale) family of processors.
+
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
@@ -264,22 +270,12 @@ config ARCH_IOP33X
help
Support for Intel's IOP33X (XScale) family of processors.
-config ARCH_IOP13XX
- bool "IOP13xx-based"
- depends on MMU
- select PLAT_IOP
- select PCI
- select ARCH_SUPPORTS_MSI
- help
- Support for Intel's IOP13XX (XScale) family of processors.
-
-config ARCH_IXP4XX
- bool "IXP4xx-based"
+config ARCH_IXP23XX
+ bool "IXP23XX-based"
depends on MMU
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
+ select PCI
help
- Support for Intel's IXP4XX (XScale) family of processors.
+ Support for Intel's IXP23xx (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
@@ -288,12 +284,13 @@ config ARCH_IXP2000
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
-config ARCH_IXP23XX
- bool "IXP23XX-based"
+config ARCH_IXP4XX
+ bool "IXP4xx-based"
depends on MMU
- select PCI
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
- Support for Intel's IXP23xx (XScale) family of processors.
+ Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_L7200
bool "LinkUp-L7200"
@@ -308,6 +305,12 @@ config ARCH_L7200
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
+config ARCH_KS8695
+ bool "Micrel/Kendin KS8695"
+ help
+ Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+ System-on-Chip devices.
+
config ARCH_NS9XXX
bool "NetSilicon NS9xxx"
help
@@ -354,7 +357,6 @@ config ARCH_SA1100
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select GENERIC_GPIO
- select GENERIC_TIME
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -377,6 +379,13 @@ config ARCH_LH7A40X
core with a wide array of integrated devices for
hand-held and low-power applications.
+config ARCH_DAVINCI
+ bool "TI DaVinci"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for TI's DaVinci platform.
+
config ARCH_OMAP
bool "TI OMAP"
select GENERIC_GPIO
@@ -445,6 +454,10 @@ source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-ns9xxx/Kconfig"
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -505,7 +518,7 @@ config ISA_DMA_API
bool
config PCI
- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
@@ -674,7 +687,8 @@ config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91 || MACH_TRIZEPS4
+ ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
+ ARCH_KS8695
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 00ea4305ad5..cbd5010d3bc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -135,6 +135,8 @@ endif
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
textofs-$(CONFIG_ARCH_NS9XXX) := 0x00108000
+ machine-$(CONFIG_ARCH_DAVINCI) := davinci
+ machine-$(CONFIG_ARCH_KS8695) := ks8695
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
new file mode 100644
index 00000000000..fbe8b304934
--- /dev/null
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -0,0 +1,957 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21
+# Mon May 7 16:30:40 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+CONFIG_ARCH_AT91SAM9RL=y
+
+#
+# AT91SAM9RL Board Type
+#
+CONFIG_MACH_AT91SAM9RLEK=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=24576
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_SEQ_DUMMY=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_DETECT=y
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AT91=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig
new file mode 100644
index 00000000000..8ab21a0719e
--- /dev/null
+++ b/arch/arm/configs/ks8695_defconfig
@@ -0,0 +1,880 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17-rc4
+# Thu May 25 15:42:51 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91 is not set
+CONFIG_ARCH_KS8695=y
+
+#
+# Kendin/Micrel KS8695 Implementations
+#
+CONFIG_MACH_KS8695=y
+# CONFIG_MACH_DSM320 is not set
+# CONFIG_MACH_CM4002 is not set
+# CONFIG_MACH_CM4008 is not set
+# CONFIG_MACH_CM40xx is not set
+# CONFIG_MACH_LITE300 is not set
+# CONFIG_MACH_SE4200 is not set
+# CONFIG_MACH_MANGA_KS8695 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM922T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_DEBUG=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_ARM_KS8695_ETHER=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_KS8695=y
+CONFIG_SERIAL_KS8695_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index a6698dc4f6b..6db6392806f 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -1,15 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Sat Jun 24 22:45:14 2006
+# Linux kernel version: 2.6.21
+# Mon Apr 30 21:23:20 2007
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@@ -26,18 +38,25 @@ CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
@@ -49,10 +68,11 @@ CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -60,14 +80,17 @@ CONFIG_OBSOLETE_INTERMODULE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
+CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Block layer
#
+CONFIG_BLOCK=y
+CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
#
# IO Schedulers
@@ -85,18 +108,29 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@@ -104,12 +138,6 @@ CONFIG_ARCH_PXA=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
#
# Intel PXA2xx Implementations
@@ -133,11 +161,16 @@ CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
#
@@ -147,16 +180,16 @@ CONFIG_XSCALE_PMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
-CONFIG_PCCARD=m
+CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_PCMCIA_IOCTL=y
#
# PC-card bridges
#
-CONFIG_PCMCIA_PXA2XX=m
+CONFIG_PCMCIA_PXA2XX=y
#
# Kernel Features
@@ -164,7 +197,8 @@ CONFIG_PCMCIA_PXA2XX=m
CONFIG_PREEMPT=y
# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -174,6 +208,8 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
@@ -184,8 +220,9 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200n8"
+CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
#
# Floating point emulation
@@ -203,16 +240,16 @@ CONFIG_FPE_NWFPE_XP=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
+# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-CONFIG_APM=y
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_APM_EMULATION is not set
#
# Networking
@@ -222,13 +259,15 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
@@ -246,24 +285,25 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -271,29 +311,16 @@ CONFIG_NETFILTER=y
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
CONFIG_IP_NF_QUEUE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
@@ -318,7 +345,6 @@ CONFIG_VLAN_8021Q=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -378,6 +404,7 @@ CONFIG_IRTTY_SIR=m
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_PXA_FICP is not set
+# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -401,14 +428,20 @@ CONFIG_BT_HIDP=m
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
#
# Device Drivers
@@ -420,16 +453,13 @@ CONFIG_WIRELESS_EXT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
@@ -445,12 +475,13 @@ CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=y
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
@@ -490,9 +521,8 @@ CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_TRIZEPS4 is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_SHARP_SL is not set
@@ -501,42 +531,45 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
# Self-contained MTD device drivers
#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2000=y
+CONFIG_MTD_DOC2001=y
CONFIG_MTD_DOC2001PLUS=y
CONFIG_MTD_DOCPROBE=y
CONFIG_MTD_DOCECC=y
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-
-#
-# NAND Flash Device Drivers
-#
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
+CONFIG_MTD_DOCPROBE_HIGH=y
+# CONFIG_MTD_DOCPROBE_55AA is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_DISKONCHIP=y
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
# CONFIG_MTD_NAND_SHARPSL is not set
# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+# CONFIG_MTD_ONENAND_OTP is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -546,6 +579,7 @@ CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -556,9 +590,9 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_COUNT=8
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -566,6 +600,7 @@ CONFIG_BLK_DEV_INITRD=y
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
@@ -585,27 +620,27 @@ CONFIG_BLK_DEV_IDECS=m
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
-CONFIG_IDE_PXA_CF=y
-CONFIG_IDE_ARM=y
+# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
@@ -614,21 +649,23 @@ CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
#
# PCMCIA SCSI adapter support
@@ -640,6 +677,14 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_PCMCIA_SYM53C500 is not set
#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_PLATFORM=m
+
+#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
@@ -675,10 +720,14 @@ CONFIG_PHYLIB=y
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
-CONFIG_DAVICOM_PHY=y
+# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
@@ -687,6 +736,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
+# CONFIG_SMC911X is not set
#
# Ethernet (1000 Mbit)
@@ -701,41 +751,23 @@ CONFIG_DM9000=y
#
#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
+CONFIG_HERMES=y
# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_HERMES=y
+CONFIG_PCMCIA_SPECTRUM=y
+# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_HOSTAP=m
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_CS=m
-CONFIG_NET_WIRELESS=y
+CONFIG_HOSTAP_CS=y
+# CONFIG_ZD1211RW is not set
#
# PCMCIA network device support
@@ -756,6 +788,7 @@ CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
+CONFIG_SLHC=m
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
@@ -770,6 +803,7 @@ CONFIG_PPP_MPPE=m
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
@@ -789,22 +823,27 @@ CONFIG_INPUT_EVDEV=y
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=y
+CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_UCB1400=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
@@ -823,6 +862,7 @@ CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -862,15 +902,12 @@ CONFIG_SA1100_WATCHDOG=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
-# Ftape, the floppy tape device driver
-#
-
-#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
@@ -882,7 +919,6 @@ CONFIG_SA1100_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -902,6 +938,7 @@ CONFIG_I2C_CHARDEV=y
#
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_SLAVE=y
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_ISA is not set
@@ -911,7 +948,7 @@ CONFIG_I2C_PXA_SLAVE=y
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
@@ -924,18 +961,8 @@ CONFIG_SENSORS_EEPROM=m
#
# SPI support
#
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
@@ -947,9 +974,11 @@ CONFIG_SPI_PXA2XX=m
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
@@ -973,10 +1002,15 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -987,16 +1021,15 @@ CONFIG_HWMON=y
#
#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
#
-CONFIG_UCB1400=y
-CONFIG_UCB1400_TS=y
+# CONFIG_MFD_SM501 is not set
#
# LED devices
#
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS is not set
#
# LED drivers
@@ -1007,13 +1040,13 @@ CONFIG_LEDS_CLASS=y
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -1024,17 +1057,28 @@ CONFIG_VIDEO_V4L2=y
#
# Graphics support
#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -1063,11 +1107,6 @@ CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
#
# Sound
@@ -1082,7 +1121,7 @@ CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
@@ -1093,13 +1132,14 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_DETECT=y
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
@@ -1124,9 +1164,32 @@ CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_PDAUDIOCF is not set
#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
#
# USB support
@@ -1141,7 +1204,7 @@ CONFIG_USB=y
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
@@ -1151,7 +1214,8 @@ CONFIG_USB_DEVICEFS=y
#
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
@@ -1179,38 +1243,25 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-CONFIG_USB_TOUCHSCREEN=m
-# CONFIG_USB_TOUCHSCREEN_EGALAX is not set
-# CONFIG_USB_TOUCHSCREEN_PANJIT is not set
-# CONFIG_USB_TOUCHSCREEN_3M is not set
-# CONFIG_USB_TOUCHSCREEN_ITM is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
@@ -1225,9 +1276,9 @@ CONFIG_USB_TOUCHSCREEN=m
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -1236,23 +1287,66 @@ CONFIG_USB_MON=y
#
# USB Serial Converter support
#
-# CONFIG_USB_SERIAL is not set
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
@@ -1262,9 +1356,10 @@ CONFIG_USB_MON=y
#
# USB Gadget Support
#
-CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
@@ -1272,15 +1367,14 @@ CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=m
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
#
# MMC/SD Card support
@@ -1295,8 +1389,8 @@ CONFIG_MMC_PXA=y
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
@@ -1304,17 +1398,25 @@ CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
+CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_SA1100=y
# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
# File systems
@@ -1328,6 +1430,7 @@ CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
@@ -1335,10 +1438,12 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
@@ -1365,8 +1470,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
@@ -1376,18 +1483,17 @@ CONFIG_RAMFS=y
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -1407,20 +1513,18 @@ CONFIG_JFFS2_CMODE_PRIORITY=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
@@ -1430,7 +1534,9 @@ CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1504,22 +1610,28 @@ CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
+# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_DEBUG_USER=y
#
@@ -1531,22 +1643,31 @@ CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_SECLVL is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=y
+# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
@@ -1554,12 +1675,13 @@ CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
@@ -1569,6 +1691,7 @@ CONFIG_CRYPTO_CRC32C=y
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=y
@@ -1577,3 +1700,6 @@ CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 4779f474f91..9179e822031 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -76,6 +76,7 @@ EXPORT_SYMBOL(__const_udelay);
/* networking */
EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_from_user);
EXPORT_SYMBOL(csum_partial_copy_nocheck);
EXPORT_SYMBOL(__csum_ipv6_magic);
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index bdbd7da9928..f56d48c451e 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -41,11 +41,11 @@
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/kthread.h>
+#include <linux/io.h>
#include <asm/dma.h>
#include <asm/ecard.h>
#include <asm/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/mach/irq.h>
@@ -958,6 +958,31 @@ void ecard_release_resources(struct expansion_card *ec)
}
EXPORT_SYMBOL(ecard_release_resources);
+void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data)
+{
+ ec->irq_data = irq_data;
+ barrier();
+ ec->ops = ops;
+}
+EXPORT_SYMBOL(ecard_setirq);
+
+void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
+ unsigned long offset, unsigned long maxsize)
+{
+ unsigned long start = ecard_resource_start(ec, res);
+ unsigned long end = ecard_resource_end(ec, res);
+
+ if (offset > (end - start))
+ return NULL;
+
+ start += offset;
+ if (maxsize && end - start > maxsize)
+ end = start + maxsize;
+
+ return devm_ioremap(&ec->dev, start, end - start);
+}
+EXPORT_SYMBOL(ecardm_iomap);
+
/*
* Probe for an expansion card.
*
@@ -1133,6 +1158,14 @@ static int ecard_drv_remove(struct device *dev)
drv->remove(ec);
ecard_release(ec);
+ /*
+ * Restore the default operations. We ensure that the
+ * ops are set before we change the data.
+ */
+ ec->ops = &ecard_default_ops;
+ barrier();
+ ec->irq_data = NULL;
+
return 0;
}
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 77ef35efaa8..398d0c0511e 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -52,21 +52,15 @@ static int save_trace(struct stackframe *frame, void *d)
return trace->nr_entries >= trace->max_entries;
}
-void save_stack_trace(struct stack_trace *trace, struct task_struct *task)
+void save_stack_trace(struct stack_trace *trace)
{
struct stack_trace_data data;
unsigned long fp, base;
data.trace = trace;
data.skip = trace->skip;
-
- if (task) {
- base = (unsigned long)task_stack_page(task);
- fp = 0; /* FIXME */
- } else {
- base = (unsigned long)task_stack_page(current);
- asm("mov %0, fp" : "=r" (fp));
- }
+ base = (unsigned long)task_stack_page(current);
+ asm("mov %0, fp" : "=r" (fp));
walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
}
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index d0540e4eaf5..1533d3ecd7a 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -512,7 +512,7 @@ void __init time_init(void)
#ifdef CONFIG_NO_IDLE_HZ
if (system_timer->dyn_tick)
- system_timer->dyn_tick->lock = SPIN_LOCK_UNLOCKED;
+ spin_lock_init(&system_timer->dyn_tick->lock);
#endif
}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 018d637f87f..a31157f1655 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -17,6 +17,9 @@ config ARCH_AT91SAM9261
config ARCH_AT91SAM9263
bool "AT91SAM9263"
+config ARCH_AT91SAM9RL
+ bool "AT91SAM9RL"
+
endchoice
# ----------------------------------------------------------
@@ -152,6 +155,20 @@ endif
# ----------------------------------------------------------
+if ARCH_AT91SAM9RL
+
+comment "AT91SAM9RL Board Type"
+
+config MACH_AT91SAM9RLEK
+ bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9RL
+ help
+ Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index a412ae18a42..a4d80eb056e 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devic
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
@@ -36,9 +37,13 @@ obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+# AT91SAM9RL board-specific support
+obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
+
# LEDs support
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
+led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
led-$(CONFIG_MACH_CSB337) += leds.o
led-$(CONFIG_MACH_CSB637) += leds.o
led-$(CONFIG_MACH_KB9200) += leds.o
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 2624a4f22d6..70599bcf451 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -22,9 +22,6 @@
#include "generic.h"
-#define SZ_512 0x00000200
-#define SZ_256 0x00000100
-#define SZ_16 0x00000010
/* --------------------------------------------------------------------
* USB Host
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 40586e22cd3..ffd3154c1e5 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -22,9 +22,6 @@
#include "generic.h"
-#define SZ_512 0x00000200
-#define SZ_256 0x00000100
-#define SZ_16 0x00000010
/* --------------------------------------------------------------------
* USB Host
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 8e781997716..9db58da0475 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -23,9 +23,6 @@
#include "generic.h"
-#define SZ_512 0x00000200
-#define SZ_256 0x00000100
-#define SZ_16 0x00000010
/* --------------------------------------------------------------------
* USB Host
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 2b2e18a6712..635695787f9 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -22,9 +22,6 @@
#include "generic.h"
-#define SZ_512 0x00000200
-#define SZ_256 0x00000100
-#define SZ_16 0x00000010
/* --------------------------------------------------------------------
* USB Host
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
new file mode 100644
index 00000000000..4813a35f6cf
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -0,0 +1,341 @@
+/*
+ * arch/arm/mach-at91/at91sam9rl.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9rl_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc at91sam9rl_sram_desc[] __initdata = {
+ {
+ .pfn = __phys_to_pfn(AT91SAM9RL_SRAM_BASE),
+ .type = MT_DEVICE,
+ }
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioD_clk = {
+ .name = "pioD_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_PIOD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_US3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+ .name = "twi0_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_TWI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+ .name = "twi1_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_TWI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi_clk = {
+ .name = "spi_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_SPI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc0_clk = {
+ .name = "tc0_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_TC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+ .name = "tc1_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_TC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+ .name = "tc2_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_TC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwmc_clk = {
+ .name = "pwmc_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_PWMC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tsc_clk = {
+ .name = "tsc_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_TSC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+ .name = "dma_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_DMA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+ .name = "udphs_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_UDPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+ .name = "ac97_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_AC97C,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &pioD_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &usart3_clk,
+ &mmc_clk,
+ &twi0_clk,
+ &twi1_clk,
+ &spi_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &tc0_clk,
+ &tc1_clk,
+ &tc2_clk,
+ &pwmc_clk,
+ &tsc_clk,
+ &dma_clk,
+ &udphs_clk,
+ &lcdc_clk,
+ &ac97_clk,
+ // irq0
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+
+static void __init at91sam9rl_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9rl_gpio[] = {
+ {
+ .id = AT91SAM9RL_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91SAM9RL_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91SAM9RL_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }, {
+ .id = AT91SAM9RL_ID_PIOD,
+ .offset = AT91_PIOD,
+ .clock = &pioD_clk,
+ }
+};
+
+static void at91sam9rl_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91SAM9RL processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9rl_initialize(unsigned long main_clock)
+{
+ unsigned long cidr, sram_size;
+
+ /* Map peripherals */
+ iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc));
+
+ cidr = at91_sys_read(AT91_DBGU_CIDR);
+
+ switch (cidr & AT91_CIDR_SRAMSIZ) {
+ case AT91_CIDR_SRAMSIZ_32K:
+ sram_size = 2 * SZ_16K;
+ break;
+ case AT91_CIDR_SRAMSIZ_16K:
+ default:
+ sram_size = SZ_16K;
+ }
+
+ at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
+ at91sam9rl_sram_desc->length = sram_size;
+
+ /* Map SRAM */
+ iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
+
+ at91_arch_reset = at91sam9rl_reset;
+ at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91sam9rl_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9rl_gpio, 4);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller D */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 5, /* USART 3 */
+ 0, /* Multimedia Card Interface */
+ 6, /* Two-Wire Interface 0 */
+ 6, /* Two-Wire Interface 1 */
+ 5, /* Serial Peripheral Interface */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+ 0,
+ 0, /* Touch Screen Controller */
+ 0, /* DMA Controller */
+ 2, /* USB Device High speed port */
+ 2, /* LCD Controller */
+ 6, /* AC97 Controller */
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0, /* Advanced Interrupt Controller */
+};
+
+void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91sam9rl_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
new file mode 100644
index 00000000000..cd7532bcd4e
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -0,0 +1,630 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/at91sam9rl_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_MCI,
+ .end = AT91SAM9RL_BASE_MCI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_MCI,
+ .end = AT91SAM9RL_ID_MCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_mmc_device = {
+ .name = "at91_mci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+ .num_resources = ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA2, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at91sam9rl_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
+ | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+ at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */
+
+ nand_data = *data;
+ platform_device_register(&at91_nand_device);
+}
+
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_TWI0,
+ .end = AT91SAM9RL_BASE_TWI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_TWI0,
+ .end = AT91SAM9RL_ID_TWI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+ /* pins used for TWI interface */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PA23, 1);
+
+ at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PA24, 1);
+
+ platform_device_register(&at91sam9rl_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_SPI,
+ .end = AT91SAM9RL_BASE_SPI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_SPI,
+ .end = AT91SAM9RL_ID_SPI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_spi_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi_resources,
+ .num_resources = ARRAY_SIZE(spi_resources),
+};
+
+static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 };
+
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* MISO */
+ at91_set_A_periph(AT91_PIN_PA26, 0); /* MOSI */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* SPCK */
+
+ /* Enable SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else
+ cs_pin = spi_standard_cs[devices[i].chip_select];
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+ platform_device_register(&at91sam9rl_spi_device);
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = 0xffffffffUL;
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_LCDC_BASE,
+ .end = AT91SAM9RL_LCDC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_LCDC,
+ .end = AT91SAM9RL_ID_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+#if defined(CONFIG_FB_INTSRAM)
+ [2] = {
+ .start = AT91SAM9RL_SRAM_BASE,
+ .end = AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+};
+
+static struct platform_device at91_lcdc_device = {
+ .name = "atmel_lcdfb",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+ if (!data) {
+ return;
+ }
+
+ at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */
+ at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */
+ at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */
+ at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */
+ at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */
+ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */
+ at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */
+ at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */
+ at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9rl_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .platform_data = &dbgu_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_US0,
+ .end = AT91SAM9RL_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_US0,
+ .end = AT91SAM9RL_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9rl_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .platform_data = &uart0_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_US1,
+ .end = AT91SAM9RL_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_US1,
+ .end = AT91SAM9RL_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9rl_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .platform_data = &uart1_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_US2,
+ .end = AT91SAM9RL_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_US2,
+ .end = AT91SAM9RL_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9rl_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .platform_data = &uart2_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
+}
+
+static struct resource uart3_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_US3,
+ .end = AT91SAM9RL_BASE_US3 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_US3,
+ .end = AT91SAM9RL_ID_US3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart3_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9rl_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+ .platform_data = &uart3_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+ int i;
+
+ /* Fill in list of supported UARTs */
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+ configure_usart0_pins();
+ at91_uarts[i] = &at91sam9rl_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
+ break;
+ case 1:
+ configure_usart1_pins();
+ at91_uarts[i] = &at91sam9rl_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
+ break;
+ case 2:
+ configure_usart2_pins();
+ at91_uarts[i] = &at91sam9rl_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
+ break;
+ case 3:
+ configure_usart3_pins();
+ at91_uarts[i] = &at91sam9rl_uart3_device;
+ at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
+ break;
+ case 4:
+ configure_dbgu_pins();
+ at91_uarts[i] = &at91sam9rl_dbgu_device;
+ at91_clock_associate("mck", &at91sam9rl_dbgu_device.dev, "usart");
+ break;
+ default:
+ continue;
+ }
+ at91_uarts[i]->id = i; /* update ID number to mapped ID */
+ }
+
+ /* Set serial console device */
+ if (config->console_tty < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[config->console_tty];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index bcf71536cc6..1f0c8a400b3 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -60,6 +60,9 @@ static void __init ek_map_io(void)
/* Initialize processor: 18.432 MHz crystal */
at91sam9261_initialize(18432000);
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
+
/* Setup the serial ports and console */
at91_init_serial(&ek_uart_config);
}
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
new file mode 100644
index 00000000000..30c79aca84d
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/clk.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 2,
+ .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+};
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91sam9rl_initialize(12000000);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9rl_init_interrupts(NULL);
+}
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PA15,
+// .wp_pin = ... not connected
+// .vcc_pin = ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = 256 * 1024,
+ },
+ {
+ .name = "Partition 2",
+ .offset = 256 * 1024 ,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PD17,
+ .enable_pin = AT91_PIN_PB6,
+ .partition_info = nand_partitions,
+ .bus_width_16 = 0,
+};
+
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info ek_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+};
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "TX09D50VM1CCA @ 60",
+ .refresh = 60,
+ .xres = 240, .yres = 320,
+ .pixclock = KHZ2PICOS(4965),
+
+ .left_margin = 1, .right_margin = 33,
+ .upper_margin = 1, .lower_margin = 0,
+ .hsync_len = 5, .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+ .manufacturer = "HIT",
+ .monitor = "TX09D50VM1CCA",
+
+ .modedb = at91_tft_vga_modes,
+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
+ .hfmin = 15000,
+ .hfmax = 64000,
+ .vfmin = 50,
+ .vfmax = 150,
+};
+
+#define AT91SAM9RL_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+static void at91_lcdc_power_control(int on)
+{
+ if (on)
+ at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
+ else
+ at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
+}
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
+ .default_monspecs = &at91fb_default_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
+ .guard_time = 1,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* I2C */
+ at91_add_device_i2c();
+ /* NAND */
+ at91_add_device_nand(&ek_nand_data);
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(0, &ek_mmc_data);
+ /* LCD Controller */
+ at91_add_device_lcdc(&ek_lcdc_data);
+}
+
+MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index bda26221c52..68ed71a3e6c 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -13,12 +13,14 @@ extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned shor
extern void __init at91sam9260_initialize(unsigned long main_clock);
extern void __init at91sam9261_initialize(unsigned long main_clock);
extern void __init at91sam9263_initialize(unsigned long main_clock);
+extern void __init at91sam9rl_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
new file mode 100644
index 00000000000..bac988e7a4c
--- /dev/null
+++ b/arch/arm/mach-davinci/Kconfig
@@ -0,0 +1,23 @@
+if ARCH_DAVINCI
+
+menu "TI DaVinci Implementations"
+
+comment "DaVinci Core Type"
+
+config ARCH_DAVINCI644x
+ default y
+ bool "DaVinci 644x based system"
+
+comment "DaVinci Board Type"
+
+config MACH_DAVINCI_EVM
+ bool "TI DaVinci EVM"
+ default y
+ depends on ARCH_DAVINCI644x
+ help
+ Configure this option to specify the whether the board used
+ for development is a DaVinci EVM
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
new file mode 100644
index 00000000000..a8f88cd2990
--- /dev/null
+++ b/arch/arm/mach-davinci/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux kernel.
+#
+#
+
+# Common objects
+obj-y := time.o irq.o serial.o io.o id.o psc.o
+
+# Board specific
+obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
new file mode 100644
index 00000000000..e1dd366f836
--- /dev/null
+++ b/arch/arm/mach-davinci/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x80008000
+params_phys-y := 0x80000100
+initrd_phys-y := 0x80800000
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
new file mode 100644
index 00000000000..633c12e4304
--- /dev/null
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -0,0 +1,131 @@
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/common.h>
+
+/* other misc. init functions */
+void __init davinci_psc_init(void);
+void __init davinci_irq_init(void);
+void __init davinci_map_common_io(void);
+
+/* NOR Flash base address set to CS0 by default */
+#define NOR_FLASH_PHYS 0x02000000
+
+static struct mtd_partition davinci_evm_partitions[] = {
+ /* bootloader (U-Boot, etc) in first 4 sectors */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = 4 * SZ_64K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next 1 sectors */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_64K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct physmap_flash_data davinci_evm_flash_data = {
+ .width = 2,
+ .parts = davinci_evm_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_evm_partitions),
+};
+
+/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
+ * limits addresses to 16M, so using addresses past 16M will wrap */
+static struct resource davinci_evm_flash_resource = {
+ .start = NOR_FLASH_PHYS,
+ .end = NOR_FLASH_PHYS + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device davinci_evm_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_evm_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &davinci_evm_flash_resource,
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+ &davinci_evm_flash_device,
+};
+
+static void __init
+davinci_evm_map_io(void)
+{
+ davinci_map_common_io();
+}
+
+static __init void davinci_evm_init(void)
+{
+ davinci_psc_init();
+
+#if defined(CONFIG_BLK_DEV_DAVINCI) || defined(CONFIG_BLK_DEV_DAVINCI_MODULE)
+ printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
+ "but share pins.\n\t Disable IDE for NOR support.\n");
+#endif
+
+ platform_add_devices(davinci_evm_devices,
+ ARRAY_SIZE(davinci_evm_devices));
+}
+
+static __init void davinci_evm_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
+ /* Maintainer: MontaVista Software <source@mvista.com> */
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (io_p2v(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .map_io = davinci_evm_map_io,
+ .init_irq = davinci_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = davinci_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
new file mode 100644
index 00000000000..70608f76aed
--- /dev/null
+++ b/arch/arm/mach-davinci/id.c
@@ -0,0 +1,94 @@
+/*
+ * Davinci CPU identification code
+ *
+ * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * Derived from OMAP1 CPU identification code.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#define JTAG_ID_BASE 0x01c40028
+
+struct davinci_id {
+ u8 variant; /* JTAG ID bits 31:28 */
+ u16 part_no; /* JTAG ID bits 27:12 */
+ u32 manufacturer; /* JTAG ID bits 11:1 */
+ u32 type; /* Cpu id bits [31:8], cpu class bits [7:0] */
+};
+
+/* Register values to detect the DaVinci version */
+static struct davinci_id davinci_ids[] __initdata = {
+ {
+ /* DM6446 */
+ .part_no = 0xb700,
+ .variant = 0x0,
+ .manufacturer = 0x017,
+ .type = 0x64460000,
+ },
+};
+
+/*
+ * Get Device Part No. from JTAG ID register
+ */
+static u16 __init davinci_get_part_no(void)
+{
+ u32 dev_id, part_no;
+
+ dev_id = davinci_readl(JTAG_ID_BASE);
+
+ part_no = ((dev_id >> 12) & 0xffff);
+
+ return part_no;
+}
+
+/*
+ * Get Device Revision from JTAG ID register
+ */
+static u8 __init davinci_get_variant(void)
+{
+ u32 variant;
+
+ variant = davinci_readl(JTAG_ID_BASE);
+
+ variant = (variant >> 28) & 0xf;
+
+ return variant;
+}
+
+void __init davinci_check_revision(void)
+{
+ int i;
+ u16 part_no;
+ u8 variant;
+
+ part_no = davinci_get_part_no();
+ variant = davinci_get_variant();
+
+ /* First check only the major version in a safe way */
+ for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
+ if (part_no == (davinci_ids[i].part_no)) {
+ system_rev = davinci_ids[i].type;
+ break;
+ }
+ }
+
+ /* Check if we can find the dev revision */
+ for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
+ if (part_no == davinci_ids[i].part_no &&
+ variant == davinci_ids[i].variant) {
+ system_rev = davinci_ids[i].type;
+ break;
+ }
+ }
+
+ printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
+}
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
new file mode 100644
index 00000000000..87fae6fb6ec
--- /dev/null
+++ b/arch/arm/mach-davinci/io.c
@@ -0,0 +1,51 @@
+/*
+ * DaVinci I/O mapping code
+ *
+ * Copyright (C) 2005-2006 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/tlb.h>
+#include <asm/io.h>
+#include <asm/memory.h>
+
+#include <asm/mach/map.h>
+
+extern void davinci_check_revision(void);
+
+/*
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ */
+static struct map_desc davinci_io_desc[] __initdata = {
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+void __init davinci_map_common_io(void)
+{
+ iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc));
+
+ /* Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but we must also do it here because of the CPU
+ * revision check below.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /* We want to check CPU revision early for cpu_is_xxxx() macros.
+ * IO space mapping must be initialized before we can do that.
+ */
+ davinci_check_revision();
+}
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
new file mode 100644
index 00000000000..1333d84d2e4
--- /dev/null
+++ b/arch/arm/mach-davinci/irq.c
@@ -0,0 +1,226 @@
+/*
+ * Interrupt handler for DaVinci boards.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach/irq.h>
+
+#define IRQ_BIT(irq) ((irq) & 0x1f)
+
+#define FIQ_REG0_OFFSET 0x0000
+#define FIQ_REG1_OFFSET 0x0004
+#define IRQ_REG0_OFFSET 0x0008
+#define IRQ_REG1_OFFSET 0x000C
+#define IRQ_ENT_REG0_OFFSET 0x0018
+#define IRQ_ENT_REG1_OFFSET 0x001C
+#define IRQ_INCTL_REG_OFFSET 0x0020
+#define IRQ_EABASE_REG_OFFSET 0x0024
+#define IRQ_INTPRI0_REG_OFFSET 0x0030
+#define IRQ_INTPRI7_REG_OFFSET 0x004C
+
+static inline unsigned int davinci_irq_readl(int offset)
+{
+ return davinci_readl(DAVINCI_ARM_INTC_BASE + offset);
+}
+
+static inline void davinci_irq_writel(unsigned long value, int offset)
+{
+ davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset);
+}
+
+/* Disable interrupt */
+static void davinci_mask_irq(unsigned int irq)
+{
+ unsigned int mask;
+ u32 l;
+
+ mask = 1 << IRQ_BIT(irq);
+
+ if (irq > 31) {
+ l = davinci_irq_readl(IRQ_ENT_REG1_OFFSET);
+ l &= ~mask;
+ davinci_irq_writel(l, IRQ_ENT_REG1_OFFSET);
+ } else {
+ l = davinci_irq_readl(IRQ_ENT_REG0_OFFSET);
+ l &= ~mask;
+ davinci_irq_writel(l, IRQ_ENT_REG0_OFFSET);
+ }
+}
+
+/* Enable interrupt */
+static void davinci_unmask_irq(unsigned int irq)
+{
+ unsigned int mask;
+ u32 l;
+
+ mask = 1 << IRQ_BIT(irq);
+
+ if (irq > 31) {
+ l = davinci_irq_readl(IRQ_ENT_REG1_OFFSET);
+ l |= mask;
+ davinci_irq_writel(l, IRQ_ENT_REG1_OFFSET);
+ } else {
+ l = davinci_irq_readl(IRQ_ENT_REG0_OFFSET);
+ l |= mask;
+ davinci_irq_writel(l, IRQ_ENT_REG0_OFFSET);
+ }
+}
+
+/* EOI interrupt */
+static void davinci_ack_irq(unsigned int irq)
+{
+ unsigned int mask;
+
+ mask = 1 << IRQ_BIT(irq);
+
+ if (irq > 31)
+ davinci_irq_writel(mask, IRQ_REG1_OFFSET);
+ else
+ davinci_irq_writel(mask, IRQ_REG0_OFFSET);
+}
+
+static struct irq_chip davinci_irq_chip_0 = {
+ .name = "AINTC",
+ .ack = davinci_ack_irq,
+ .mask = davinci_mask_irq,
+ .unmask = davinci_unmask_irq,
+};
+
+
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
+ [IRQ_VDINT0] = 2,
+ [IRQ_VDINT1] = 6,
+ [IRQ_VDINT2] = 6,
+ [IRQ_HISTINT] = 6,
+ [IRQ_H3AINT] = 6,
+ [IRQ_PRVUINT] = 6,
+ [IRQ_RSZINT] = 6,
+ [7] = 7,
+ [IRQ_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_VLCDINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_EMACINT] = 4,
+ [14] = 7,
+ [15] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_PSCIN] = 7,
+ [21] = 7,
+ [IRQ_IDE] = 4,
+ [23] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_SDIOINT] = 7,
+ [28] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_VLQINT] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_UARTINT2] = 3,
+ [IRQ_SPINT0] = 3,
+ [IRQ_SPINT1] = 3,
+ [45] = 7,
+ [IRQ_DSP2ARM0] = 4,
+ [IRQ_DSP2ARM1] = 4,
+ [IRQ_GPIO0] = 7,
+ [IRQ_GPIO1] = 7,
+ [IRQ_GPIO2] = 7,
+ [IRQ_GPIO3] = 7,
+ [IRQ_GPIO4] = 7,
+ [IRQ_GPIO5] = 7,
+ [IRQ_GPIO6] = 7,
+ [IRQ_GPIO7] = 7,
+ [IRQ_GPIOBNK0] = 7,
+ [IRQ_GPIOBNK1] = 7,
+ [IRQ_GPIOBNK2] = 7,
+ [IRQ_GPIOBNK3] = 7,
+ [IRQ_GPIOBNK4] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+/* ARM Interrupt Controller Initialization */
+void __init davinci_irq_init(void)
+{
+ unsigned i;
+ const u8 *priority = default_priorities;
+
+ /* Clear all interrupt requests */
+ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
+ davinci_irq_writel(~0x0, FIQ_REG1_OFFSET);
+ davinci_irq_writel(~0x0, IRQ_REG0_OFFSET);
+ davinci_irq_writel(~0x0, IRQ_REG1_OFFSET);
+
+ /* Disable all interrupts */
+ davinci_irq_writel(0x0, IRQ_ENT_REG0_OFFSET);
+ davinci_irq_writel(0x0, IRQ_ENT_REG1_OFFSET);
+
+ /* Interrupts disabled immediately, IRQ entry reflects all */
+ davinci_irq_writel(0x0, IRQ_INCTL_REG_OFFSET);
+
+ /* we don't use the hardware vector table, just its entry addresses */
+ davinci_irq_writel(0, IRQ_EABASE_REG_OFFSET);
+
+ /* Clear all interrupt requests */
+ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
+ davinci_irq_writel(~0x0, FIQ_REG1_OFFSET);
+ davinci_irq_writel(~0x0, IRQ_REG0_OFFSET);
+ davinci_irq_writel(~0x0, IRQ_REG1_OFFSET);
+
+ for (i = IRQ_INTPRI0_REG_OFFSET; i <= IRQ_INTPRI7_REG_OFFSET; i += 4) {
+ unsigned j;
+ u32 pri;
+
+ for (j = 0, pri = 0; j < 32; j += 4, priority++)
+ pri |= (*priority & 0x07) << j;
+ davinci_irq_writel(pri, i);
+ }
+
+ /* set up genirq dispatch for ARM INTC */
+ for (i = 0; i < DAVINCI_N_AINTC_IRQ; i++) {
+ set_irq_chip(i, &davinci_irq_chip_0);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ if (i != IRQ_TINT1_TINT34)
+ set_irq_handler(i, handle_edge_irq);
+ else
+ set_irq_handler(i, handle_level_irq);
+ }
+}
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
new file mode 100644
index 00000000000..e1b0050283a
--- /dev/null
+++ b/arch/arm/mach-davinci/psc.c
@@ -0,0 +1,113 @@
+/*
+ * TI DaVinci Power and Sleep Controller (PSC)
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/arch/psc.h>
+
+#define PTCMD __REG(0x01C41120)
+#define PDSTAT __REG(0x01C41200)
+#define PDCTL1 __REG(0x01C41304)
+#define EPCPR __REG(0x01C41070)
+#define PTSTAT __REG(0x01C41128)
+
+#define MDSTAT IO_ADDRESS(0x01C41800)
+#define MDCTL IO_ADDRESS(0x01C41A00)
+
+#define PINMUX0 __REG(0x01c40000)
+#define PINMUX1 __REG(0x01c40004)
+#define VDD3P3V_PWDN __REG(0x01C40048)
+
+static void davinci_psc_mux(unsigned int id)
+{
+ switch (id) {
+ case DAVINCI_LPSC_ATA:
+ PINMUX0 |= (1 << 17) | (1 << 16);
+ break;
+ case DAVINCI_LPSC_MMC_SD:
+ /* VDD power manupulations are done in U-Boot for CPMAC
+ * so applies to MMC as well
+ */
+ /*Set up the pull regiter for MMC */
+ VDD3P3V_PWDN = 0x0;
+ PINMUX1 &= (~(1 << 9));
+ break;
+ case DAVINCI_LPSC_I2C:
+ PINMUX1 |= (1 << 7);
+ break;
+ case DAVINCI_LPSC_McBSP:
+ PINMUX1 |= (1 << 10);
+ break;
+ default:
+ break;
+ }
+}
+
+/* Enable or disable a PSC domain */
+void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
+{
+ volatile unsigned int *mdstat = (unsigned int *)((int)MDSTAT + 4 * id);
+ volatile unsigned int *mdctl = (unsigned int *)((int)MDCTL + 4 * id);
+
+ if (id < 0)
+ return;
+
+ if (enable)
+ *mdctl |= 0x00000003; /* Enable Module */
+ else
+ *mdctl &= 0xFFFFFFF2; /* Disable Module */
+
+ if ((PDSTAT & 0x00000001) == 0) {
+ PDCTL1 |= 0x1;
+ PTCMD = (1 << domain);
+ while ((((EPCPR >> domain) & 1) == 0));
+
+ PDCTL1 |= 0x100;
+ while (!(((PTSTAT >> domain) & 1) == 0));
+ } else {
+ PTCMD = (1 << domain);
+ while (!(((PTSTAT >> domain) & 1) == 0));
+ }
+
+ if (enable)
+ while (!((*mdstat & 0x0000001F) == 0x3));
+ else
+ while (!((*mdstat & 0x0000001F) == 0x2));
+
+ if (enable)
+ davinci_psc_mux(id);
+}
+
+void __init davinci_psc_init(void)
+{
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1);
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1);
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1);
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1);
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1);
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1);
+
+ /* Turn on WatchDog timer LPSC. Needed for RESET to work */
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1);
+}
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
new file mode 100644
index 00000000000..8368c93c788
--- /dev/null
+++ b/arch/arm/mach-davinci/serial.c
@@ -0,0 +1,96 @@
+/*
+ * TI DaVinci serial driver
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/arch/serial.h>
+#include <asm/arch/irqs.h>
+
+#define UART_DAVINCI_PWREMU 0x0c
+
+static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up,
+ int offset)
+{
+ offset <<= up->regshift;
+ return (unsigned int)__raw_readb(up->membase + offset);
+}
+
+static inline void davinci_serial_outp(struct plat_serial8250_port *p,
+ int offset, int value)
+{
+ offset <<= p->regshift;
+ __raw_writeb(value, p->membase + offset);
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE),
+ .mapbase = (unsigned long)DAVINCI_UART0_BASE,
+ .irq = IRQ_UARTINT0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 27000000,
+ },
+ {
+ .flags = 0
+ },
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+static void __init davinci_serial_reset(struct plat_serial8250_port *p)
+{
+ /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
+ unsigned int pwremu = 0;
+
+ davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */
+
+ davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+ mdelay(10);
+
+ pwremu |= (0x3 << 13);
+ pwremu |= 0x1;
+ davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+}
+
+static int __init davinci_init(void)
+{
+ davinci_serial_reset(&serial_platform_data[0]);
+ return platform_device_register(&serial_device);
+}
+
+arch_initcall(davinci_init);
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
new file mode 100644
index 00000000000..4d8425de692
--- /dev/null
+++ b/arch/arm/mach-davinci/time.c
@@ -0,0 +1,372 @@
+/*
+ * DaVinci timer subsystem
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/errno.h>
+#include <asm/arch/io.h>
+
+static struct clock_event_device clockevent_davinci;
+
+#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
+#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
+#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00)
+
+enum {
+ T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS,
+};
+
+#define IS_TIMER1(id) (id & 0x2)
+#define IS_TIMER0(id) (!IS_TIMER1(id))
+#define IS_TIMER_TOP(id) ((id & 0x1))
+#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
+
+static int timer_irqs[NUM_TIMERS] = {
+ IRQ_TINT0_TINT12,
+ IRQ_TINT0_TINT34,
+ IRQ_TINT1_TINT12,
+ IRQ_TINT1_TINT34,
+};
+
+/*
+ * This driver configures the 2 64-bit count-up timers as 4 independent
+ * 32-bit count-up timers used as follows:
+ *
+ * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
+ * T0_TOP: Timer 0, top : clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top : <unused>
+ */
+#define TID_CLOCKEVENT T0_BOT
+#define TID_CLOCKSOURCE T0_TOP
+
+/* Timer register offsets */
+#define PID12 0x0
+#define TIM12 0x10
+#define TIM34 0x14
+#define PRD12 0x18
+#define PRD34 0x1c
+#define TCR 0x20
+#define TGCR 0x24
+#define WDTCR 0x28
+
+/* Timer register bitfields */
+#define TCR_ENAMODE_DISABLE 0x0
+#define TCR_ENAMODE_ONESHOT 0x1
+#define TCR_ENAMODE_PERIODIC 0x2
+#define TCR_ENAMODE_MASK 0x3
+
+#define TGCR_TIMMODE_SHIFT 2
+#define TGCR_TIMMODE_64BIT_GP 0x0
+#define TGCR_TIMMODE_32BIT_UNCHAINED 0x1
+#define TGCR_TIMMODE_64BIT_WDOG 0x2
+#define TGCR_TIMMODE_32BIT_CHAINED 0x3
+
+#define TGCR_TIM12RS_SHIFT 0
+#define TGCR_TIM34RS_SHIFT 1
+#define TGCR_RESET 0x0
+#define TGCR_UNRESET 0x1
+#define TGCR_RESET_MASK 0x3
+
+#define WDTCR_WDEN_SHIFT 14
+#define WDTCR_WDEN_DISABLE 0x0
+#define WDTCR_WDEN_ENABLE 0x1
+#define WDTCR_WDKEY_SHIFT 16
+#define WDTCR_WDKEY_SEQ0 0xa5c6
+#define WDTCR_WDKEY_SEQ1 0xda7e
+
+struct timer_s {
+ char *name;
+ unsigned int id;
+ unsigned long period;
+ unsigned long opts;
+ unsigned long reg_base;
+ unsigned long tim_reg;
+ unsigned long prd_reg;
+ unsigned long enamode_shift;
+ struct irqaction irqaction;
+};
+static struct timer_s timers[];
+
+/* values for 'opts' field of struct timer_s */
+#define TIMER_OPTS_DISABLED 0x00
+#define TIMER_OPTS_ONESHOT 0x01
+#define TIMER_OPTS_PERIODIC 0x02
+
+static int timer32_config(struct timer_s *t)
+{
+ u32 tcr = davinci_readl(t->reg_base + TCR);
+
+ /* disable timer */
+ tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
+ davinci_writel(tcr, t->reg_base + TCR);
+
+ /* reset counter to zero, set new period */
+ davinci_writel(0, t->tim_reg);
+ davinci_writel(t->period, t->prd_reg);
+
+ /* Set enable mode */
+ if (t->opts & TIMER_OPTS_ONESHOT) {
+ tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
+ } else if (t->opts & TIMER_OPTS_PERIODIC) {
+ tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+ }
+
+ davinci_writel(tcr, t->reg_base + TCR);
+ return 0;
+}
+
+static inline u32 timer32_read(struct timer_s *t)
+{
+ return davinci_readl(t->tim_reg);
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &clockevent_davinci;
+
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+/* called when 32-bit counter wraps */
+static irqreturn_t freerun_interrupt(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static struct timer_s timers[] = {
+ [TID_CLOCKEVENT] = {
+ .name = "clockevent",
+ .opts = TIMER_OPTS_DISABLED,
+ .irqaction = {
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = timer_interrupt,
+ }
+ },
+ [TID_CLOCKSOURCE] = {
+ .name = "free-run counter",
+ .period = ~0,
+ .opts = TIMER_OPTS_PERIODIC,
+ .irqaction = {
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = freerun_interrupt,
+ }
+ },
+};
+
+static void __init timer_init(void)
+{
+ u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+ int i;
+
+ /* Global init of each 64-bit timer as a whole */
+ for(i=0; i<2; i++) {
+ u32 tgcr, base = bases[i];
+
+ /* Disabled, Internal clock source */
+ davinci_writel(0, base + TCR);
+
+ /* reset both timers, no pre-scaler for timer34 */
+ tgcr = 0;
+ davinci_writel(tgcr, base + TGCR);
+
+ /* Set both timers to unchained 32-bit */
+ tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
+ davinci_writel(tgcr, base + TGCR);
+
+ /* Unreset timers */
+ tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
+ (TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
+ davinci_writel(tgcr, base + TGCR);
+
+ /* Init both counters to zero */
+ davinci_writel(0, base + TIM12);
+ davinci_writel(0, base + TIM34);
+ }
+
+ /* Init of each timer as a 32-bit timer */
+ for (i=0; i< ARRAY_SIZE(timers); i++) {
+ struct timer_s *t = &timers[i];
+
+ if (t->name) {
+ t->id = i;
+ t->reg_base = (IS_TIMER1(t->id) ?
+ DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
+
+ if (IS_TIMER_BOT(t->id)) {
+ t->enamode_shift = 6;
+ t->tim_reg = t->reg_base + TIM12;
+ t->prd_reg = t->reg_base + PRD12;
+ } else {
+ t->enamode_shift = 22;
+ t->tim_reg = t->reg_base + TIM34;
+ t->prd_reg = t->reg_base + PRD34;
+ }
+
+ /* Register interrupt */
+ t->irqaction.name = t->name;
+ t->irqaction.dev_id = (void *)t;
+ if (t->irqaction.handler != NULL) {
+ setup_irq(timer_irqs[t->id], &t->irqaction);
+ }
+
+ timer32_config(&timers[i]);
+ }
+ }
+}
+
+/*
+ * clocksource
+ */
+static cycle_t read_cycles(void)
+{
+ struct timer_s *t = &timers[TID_CLOCKSOURCE];
+
+ return (cycles_t)timer32_read(t);
+}
+
+static struct clocksource clocksource_davinci = {
+ .name = "timer0_1",
+ .rating = 300,
+ .read = read_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 24,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * clockevent
+ */
+static int davinci_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct timer_s *t = &timers[TID_CLOCKEVENT];
+
+ t->period = cycles;
+ timer32_config(t);
+ return 0;
+}
+
+static void davinci_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct timer_s *t = &timers[TID_CLOCKEVENT];
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ t->period = CLOCK_TICK_RATE / (HZ);
+ t->opts = TIMER_OPTS_PERIODIC;
+ timer32_config(t);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ t->opts = TIMER_OPTS_ONESHOT;
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ t->opts = TIMER_OPTS_DISABLED;
+ break;
+ }
+}
+
+static struct clock_event_device clockevent_davinci = {
+ .name = "timer0_0",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_next_event = davinci_set_next_event,
+ .set_mode = davinci_set_mode,
+};
+
+
+static void __init davinci_timer_init(void)
+{
+ static char err[] __initdata = KERN_ERR
+ "%s: can't register clocksource!\n";
+
+ /* init timer hw */
+ timer_init();
+
+ /* setup clocksource */
+ clocksource_davinci.mult =
+ clocksource_khz2mult(CLOCK_TICK_RATE/1000,
+ clocksource_davinci.shift);
+ if (clocksource_register(&clocksource_davinci))
+ printk(err, clocksource_davinci.name);
+
+ /* setup clockevent */
+ clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+ clockevent_davinci.shift);
+ clockevent_davinci.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
+ clockevent_davinci.min_delta_ns =
+ clockevent_delta2ns(1, &clockevent_davinci);
+
+ clockevent_davinci.cpumask = cpumask_of_cpu(0);
+ clockevents_register_device(&clockevent_davinci);
+}
+
+struct sys_timer davinci_timer = {
+ .init = davinci_timer_init,
+};
+
+
+/* reset board using watchdog timer */
+void davinci_watchdog_reset(void) {
+ u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE;
+
+ /* disable, internal clock source */
+ davinci_writel(0, base + TCR);
+
+ /* reset timer, set mode to 64-bit watchdog, and unreset */
+ tgcr = 0;
+ davinci_writel(tgcr, base + TCR);
+ tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
+ tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
+ (TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
+ davinci_writel(tgcr, base + TCR);
+
+ /* clear counter and period regs */
+ davinci_writel(0, base + TIM12);
+ davinci_writel(0, base + TIM34);
+ davinci_writel(0, base + PRD12);
+ davinci_writel(0, base + PRD34);
+
+ /* enable */
+ wdtcr = davinci_readl(base + WDTCR);
+ wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
+ davinci_writel(wdtcr, base + WDTCR);
+
+ /* put watchdog in pre-active state */
+ wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
+ (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
+ davinci_writel(wdtcr, base + WDTCR);
+
+ /* put watchdog in active state */
+ wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
+ (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
+ davinci_writel(wdtcr, base + WDTCR);
+
+ /* write an invalid value to the WDKEY field to trigger
+ * a watchdog reset */
+ wdtcr = 0x00004000;
+ davinci_writel(wdtcr, base + WDTCR);
+}
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index bbf0d332407..6b2380e153e 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -102,7 +102,7 @@ EXPORT_SYMBOL(__readb);
EXPORT_SYMBOL(__readw);
EXPORT_SYMBOL(__readl);
-void readsw(void __iomem *addr, void *data, int len)
+void readsw(const void __iomem *addr, void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
@@ -112,7 +112,7 @@ void readsw(void __iomem *addr, void *data, int len)
}
EXPORT_SYMBOL(readsw);
-void readsl(void __iomem *addr, void *data, int len)
+void readsl(const void __iomem *addr, void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
@@ -157,7 +157,7 @@ EXPORT_SYMBOL(__writeb);
EXPORT_SYMBOL(__writew);
EXPORT_SYMBOL(__writel);
-void writesw(void __iomem *addr, void *data, int len)
+void writesw(void __iomem *addr, const void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
@@ -167,7 +167,7 @@ void writesw(void __iomem *addr, void *data, int len)
}
EXPORT_SYMBOL(writesw);
-void writesl(void __iomem *addr, void *data, int len)
+void writesl(void __iomem *addr, const void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile
index da1609dc0de..cad015fee12 100644
--- a/arch/arm/mach-iop13xx/Makefile
+++ b/arch/arm/mach-iop13xx/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_ARCH_IOP13XX) += io.o
obj-$(CONFIG_ARCH_IOP13XX) += tpmi.o
obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o
+obj-$(CONFIG_PCI_MSI) += msi.o
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index b2eb0b96103..5791addd436 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -26,6 +26,7 @@
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/irqs.h>
+#include <asm/arch/msi.h>
/* INTCTL0 CP6 R0 Page 4
*/
@@ -258,7 +259,7 @@ void __init iop13xx_init_irq(void)
write_intbase(INTBASE);
write_intsize(INTSIZE_4);
- for(i = 0; i < NR_IOP13XX_IRQS; i++) {
+ for(i = 0; i <= IRQ_IOP13XX_HPI; i++) {
if (i < 32)
set_irq_chip(i, &iop13xx_irqchip1);
else if (i < 64)
@@ -271,4 +272,6 @@ void __init iop13xx_init_irq(void)
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
+
+ iop13xx_msi_init();
}
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
new file mode 100644
index 00000000000..2d236930222
--- /dev/null
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -0,0 +1,194 @@
+/*
+ * arch/arm/mach-iop13xx/msi.c
+ *
+ * PCI MSI support for the iop13xx processor
+ *
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/pci.h>
+#include <linux/msi.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+
+#define IOP13XX_NUM_MSI_IRQS 128
+static DECLARE_BITMAP(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
+
+/* IMIPR0 CP6 R8 Page 1
+ */
+static inline u32 read_imipr_0(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c8, c1, 0":"=r" (val));
+ return val;
+}
+static inline void write_imipr_0(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c8, c1, 0"::"r" (val));
+}
+
+/* IMIPR1 CP6 R9 Page 1
+ */
+static inline u32 read_imipr_1(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c9, c1, 0":"=r" (val));
+ return val;
+}
+static inline void write_imipr_1(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c9, c1, 0"::"r" (val));
+}
+
+/* IMIPR2 CP6 R10 Page 1
+ */
+static inline u32 read_imipr_2(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c10, c1, 0":"=r" (val));
+ return val;
+}
+static inline void write_imipr_2(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c10, c1, 0"::"r" (val));
+}
+
+/* IMIPR3 CP6 R11 Page 1
+ */
+static inline u32 read_imipr_3(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c11, c1, 0":"=r" (val));
+ return val;
+}
+static inline void write_imipr_3(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c11, c1, 0"::"r" (val));
+}
+
+static u32 (*read_imipr[])(void) = {
+ read_imipr_0,
+ read_imipr_1,
+ read_imipr_2,
+ read_imipr_3,
+};
+
+static void (*write_imipr[])(u32) = {
+ write_imipr_0,
+ write_imipr_1,
+ write_imipr_2,
+ write_imipr_3,
+};
+
+static void iop13xx_msi_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int i, j;
+ unsigned long status;
+
+ /* read IMIPR registers and find any active interrupts,
+ * then call ISR for each active interrupt
+ */
+ for (i = 0; i < ARRAY_SIZE(read_imipr); i++) {
+ status = (read_imipr[i])();
+ if (!status)
+ continue;
+
+ do {
+ j = find_first_bit(&status, 32);
+ (write_imipr[i])(1 << j); /* write back to clear bit */
+ desc = irq_desc + IRQ_IOP13XX_MSI_0 + j + (32*i);
+ desc_handle_irq(IRQ_IOP13XX_MSI_0 + j + (32*i), desc);
+ status = (read_imipr[i])();
+ } while (status);
+ }
+}
+
+void __init iop13xx_msi_init(void)
+{
+ set_irq_chained_handler(IRQ_IOP13XX_INBD_MSI, iop13xx_msi_handler);
+}
+
+/*
+ * Dynamic irq allocate and deallocation
+ */
+int create_irq(void)
+{
+ int irq, pos;
+
+again:
+ pos = find_first_zero_bit(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
+ irq = IRQ_IOP13XX_MSI_0 + pos;
+ if (irq > NR_IRQS)
+ return -ENOSPC;
+ /* test_and_set_bit operates on 32-bits at a time */
+ if (test_and_set_bit(pos, msi_irq_in_use))
+ goto again;
+
+ dynamic_irq_init(irq);
+
+ return irq;
+}
+
+void destroy_irq(unsigned int irq)
+{
+ int pos = irq - IRQ_IOP13XX_MSI_0;
+
+ dynamic_irq_cleanup(irq);
+
+ clear_bit(pos, msi_irq_in_use);
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+ destroy_irq(irq);
+}
+
+static void iop13xx_msi_nop(unsigned int irq)
+{
+ return;
+}
+
+static struct irq_chip iop13xx_msi_chip = {
+ .name = "PCI-MSI",
+ .ack = iop13xx_msi_nop,
+ .enable = unmask_msi_irq,
+ .disable = mask_msi_irq,
+ .mask = mask_msi_irq,
+ .unmask = unmask_msi_irq,
+};
+
+int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+{
+ int id, irq = create_irq();
+ struct msi_msg msg;
+
+ if (irq < 0)
+ return irq;
+
+ set_irq_msi(irq, desc);
+
+ msg.address_hi = 0x0;
+ msg.address_lo = IOP13XX_MU_MIMR_PCI;
+
+ id = iop13xx_cpu_id();
+ msg.data = (id << IOP13XX_MU_MIMR_CORE_SELECT) | (irq & 0x7f);
+
+ write_msi_msg(irq, &msg);
+ set_irq_chip_and_handler(irq, &iop13xx_msi_chip, handle_simple_irq);
+
+ return irq;
+}
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index d1d0d32ca77..1c9e94c38b7 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -559,6 +559,14 @@ void __init iop13xx_atue_setup(void)
int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
u32 reg_val;
+#ifdef CONFIG_PCI_MSI
+ /* BAR 0 (inbound msi window) */
+ __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
+ __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUE_IALR0);
+ __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUE_IATVR0);
+ __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUE_IABAR0);
+#endif
+
/* BAR 1 (1:1 mapping with Physical RAM) */
/* Set limit and enable */
__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
@@ -720,6 +728,14 @@ void __init iop13xx_atux_setup(void)
else
atux_trhfa_timeout = jiffies;
+#ifdef CONFIG_PCI_MSI
+ /* BAR 0 (inbound msi window) */
+ __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
+ __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUX_IALR0);
+ __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUX_IATVR0);
+ __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUX_IABAR0);
+#endif
+
/* BAR 1 (1:1 mapping with Physical RAM) */
/* Set limit and enable */
__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
new file mode 100644
index 00000000000..ce1cf8de2b4
--- /dev/null
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -0,0 +1,13 @@
+if ARCH_KS8695
+
+menu "Kendin/Micrel KS8695 Implementations"
+
+config MACH_KS8695
+ bool "KS8695 development board"
+ help
+ Say 'Y' here if you want your kernel to run on the original
+ Kendin-Micrel KS8695 development board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
new file mode 100644
index 00000000000..56b7d337333
--- /dev/null
+++ b/arch/arm/mach-ks8695/Makefile
@@ -0,0 +1,15 @@
+# arch/arm/mach-ks8695/Makefile
+#
+# Makefile for KS8695 architecture support
+#
+
+obj-y := cpu.o irq.o time.o devices.o
+obj-m :=
+obj-n :=
+obj- :=
+
+# PCI support is optional
+#obj-$(CONFIG_PCI) += pci.o
+
+# Board-specific support
+obj-$(CONFIG_MACH_KS8695) += board-micrel.o
diff --git a/arch/arm/mach-ks8695/Makefile.boot b/arch/arm/mach-ks8695/Makefile.boot
new file mode 100644
index 00000000000..48eb2cb3ac7
--- /dev/null
+++ b/arch/arm/mach-ks8695/Makefile.boot
@@ -0,0 +1,8 @@
+# Note: the following conditions must always be true:
+# ZRELADDR == virt_to_phys(TEXTADDR)
+# PARAMS_PHYS must be within 4MB of ZRELADDR
+# INITRD_PHYS must be in RAM
+
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
new file mode 100644
index 00000000000..8fc0edb5211
--- /dev/null
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-ks8695/board-micrel.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/devices.h>
+
+#include "generic.h"
+
+#ifdef CONFIG_PCI
+static int __init micrel_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return KS8695_IRQ_EXTERN0;
+}
+
+static struct ks8695_pci_cfg micrel_pci = {
+ .mode = KS8695_MODE_MINIPCI,
+ .map_irq = micrel_pci_map_irq,
+};
+#endif
+
+
+static void micrel_init(void)
+{
+ printk(KERN_INFO "Micrel KS8695 Development Board initializing\n");
+
+#ifdef CONFIG_PCI
+ ks8695_init_pci(&micrel_pci);
+#endif
+
+ /* Add devices */
+ ks8695_add_device_wan(); /* eth0 = WAN */
+ ks8695_add_device_lan(); /* eth1 = LAN */
+}
+
+MACHINE_START(KS8695, "KS8695 Centaur Development Board")
+ /* Maintainer: Micrel Semiconductor Inc. */
+ .phys_io = KS8695_IO_PA,
+ .io_pg_offst = (KS8695_IO_VA >> 18) & 0xfffc,
+ .boot_params = KS8695_SDRAM_PA + 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = micrel_init,
+ .timer = &ks8695_timer,
+MACHINE_END
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
new file mode 100644
index 00000000000..407d255e42b
--- /dev/null
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-ks8695/cpu.c
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/regs-sys.h>
+#include <asm/arch/regs-misc.h>
+
+
+static struct __initdata map_desc ks8695_io_desc[] = {
+ {
+ .virtual = KS8695_IO_VA,
+ .pfn = __phys_to_pfn(KS8695_IO_PA),
+ .length = KS8695_IO_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
+static void __init ks8695_processor_info(void)
+{
+ unsigned long id, rev;
+
+ id = __raw_readl(KS8695_MISC_VA + KS8695_DID);
+ rev = __raw_readl(KS8695_MISC_VA + KS8695_RID);
+
+ printk("KS8695 ID=%04lx SubID=%02lx Revision=%02lx\n", (id & DID_ID), (rev & RID_SUBID), (rev & RID_REVISION));
+}
+
+static unsigned int sysclk[8] = { 125000000, 100000000, 62500000, 50000000, 41700000, 33300000, 31300000, 25000000 };
+static unsigned int cpuclk[8] = { 166000000, 166000000, 83000000, 83000000, 55300000, 55300000, 41500000, 41500000 };
+
+static void __init ks8695_clock_info(void)
+{
+ unsigned int scdc = __raw_readl(KS8695_SYS_VA + KS8695_CLKCON) & CLKCON_SCDC;
+
+ printk("Clocks: System %u MHz, CPU %u MHz\n",
+ sysclk[scdc] / 1000000, cpuclk[scdc] / 1000000);
+}
+
+void __init ks8695_map_io(void)
+{
+ iotable_init(ks8695_io_desc, ARRAY_SIZE(ks8695_io_desc));
+
+ ks8695_processor_info();
+ ks8695_clock_info();
+}
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
new file mode 100644
index 00000000000..386593f8ac6
--- /dev/null
+++ b/arch/arm/mach-ks8695/devices.c
@@ -0,0 +1,191 @@
+/*
+ * arch/arm/mach-ks8695/devices.c
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/regs-wan.h>
+#include <asm/arch/regs-lan.h>
+#include <asm/arch/regs-hpna.h>
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ARM_KS8695_ETHER) || defined(CONFIG_ARM_KS8695_ETHER_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+
+static struct resource ks8695_wan_resources[] = {
+ [0] = {
+ .start = KS8695_WAN_VA,
+ .end = KS8695_WAN_VA + 0x00ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "WAN RX",
+ .start = KS8695_IRQ_WAN_RX_STATUS,
+ .end = KS8695_IRQ_WAN_RX_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "WAN TX",
+ .start = KS8695_IRQ_WAN_TX_STATUS,
+ .end = KS8695_IRQ_WAN_TX_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .name = "WAN Link",
+ .start = KS8695_IRQ_WAN_LINK,
+ .end = KS8695_IRQ_WAN_LINK,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ks8695_wan_device = {
+ .name = "ks8695_ether",
+ .id = 0,
+ .dev = {
+ .dma_mask = &eth_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = ks8695_wan_resources,
+ .num_resources = ARRAY_SIZE(ks8695_wan_resources),
+};
+
+
+static struct resource ks8695_lan_resources[] = {
+ [0] = {
+ .start = KS8695_LAN_VA,
+ .end = KS8695_LAN_VA + 0x00ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "LAN RX",
+ .start = KS8695_IRQ_LAN_RX_STATUS,
+ .end = KS8695_IRQ_LAN_RX_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "LAN TX",
+ .start = KS8695_IRQ_LAN_TX_STATUS,
+ .end = KS8695_IRQ_LAN_TX_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ks8695_lan_device = {
+ .name = "ks8695_ether",
+ .id = 1,
+ .dev = {
+ .dma_mask = &eth_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = ks8695_lan_resources,
+ .num_resources = ARRAY_SIZE(ks8695_lan_resources),
+};
+
+
+static struct resource ks8695_hpna_resources[] = {
+ [0] = {
+ .start = KS8695_HPNA_VA,
+ .end = KS8695_HPNA_VA + 0x00ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "HPNA RX",
+ .start = KS8695_IRQ_HPNA_RX_STATUS,
+ .end = KS8695_IRQ_HPNA_RX_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "HPNA TX",
+ .start = KS8695_IRQ_HPNA_TX_STATUS,
+ .end = KS8695_IRQ_HPNA_TX_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ks8695_hpna_device = {
+ .name = "ks8695_ether",
+ .id = 2,
+ .dev = {
+ .dma_mask = &eth_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = ks8695_hpna_resources,
+ .num_resources = ARRAY_SIZE(ks8695_hpna_resources),
+};
+
+void __init ks8695_add_device_wan(void)
+{
+ platform_device_register(&ks8695_wan_device);
+}
+
+void __init ks8695_add_device_lan(void)
+{
+ platform_device_register(&ks8695_lan_device);
+}
+
+void __init ks8696_add_device_hpna(void)
+{
+ platform_device_register(&ks8695_hpna_device);
+}
+#else
+void __init ks8695_add_device_wan(void) {}
+void __init ks8695_add_device_lan(void) {}
+void __init ks8696_add_device_hpna(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_KS8695_WATCHDOG) || defined(CONFIG_KS8695_WATCHDOG_MODULE)
+static struct platform_device ks8695_wdt_device = {
+ .name = "ks8695_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init ks8695_add_device_watchdog(void)
+{
+ platform_device_register(&ks8695_wdt_device);
+}
+#else
+static void __init ks8695_add_device_watchdog(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init ks8695_add_standard_devices(void)
+{
+ ks8695_add_device_watchdog();
+ return 0;
+}
+
+arch_initcall(ks8695_add_standard_devices);
diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h
new file mode 100644
index 00000000000..2fbfab8d5fa
--- /dev/null
+++ b/arch/arm/mach-ks8695/generic.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-ks8695/generic.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+*/
+
+extern __init void ks8695_map_io(void);
+extern __init void ks8695_init_irq(void);
+extern struct sys_timer ks8695_timer;
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
new file mode 100644
index 00000000000..2407bba0054
--- /dev/null
+++ b/arch/arm/mach-ks8695/irq.c
@@ -0,0 +1,175 @@
+/*
+ * arch/arm/mach-ks8695/irq.c
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+static void ks8695_irq_mask(unsigned int irqno)
+{
+ unsigned long inten;
+
+ inten = __raw_readl(KS8695_IRQ_VA + KS8695_INTEN);
+ inten &= ~(1 << irqno);
+
+ __raw_writel(inten, KS8695_IRQ_VA + KS8695_INTEN);
+}
+
+static void ks8695_irq_unmask(unsigned int irqno)
+{
+ unsigned long inten;
+
+ inten = __raw_readl(KS8695_IRQ_VA + KS8695_INTEN);
+ inten |= (1 << irqno);
+
+ __raw_writel(inten, KS8695_IRQ_VA + KS8695_INTEN);
+}
+
+static void ks8695_irq_ack(unsigned int irqno)
+{
+ __raw_writel((1 << irqno), KS8695_IRQ_VA + KS8695_INTST);
+}
+
+
+static struct irq_chip ks8695_irq_level_chip;
+static struct irq_chip ks8695_irq_edge_chip;
+
+
+static int ks8695_irq_set_type(unsigned int irqno, unsigned int type)
+{
+ unsigned long ctrl, mode;
+ unsigned short level_triggered = 0;
+
+ ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+
+ switch (type) {
+ case IRQT_HIGH:
+ mode = IOPC_TM_HIGH;
+ level_triggered = 1;
+ break;
+ case IRQT_LOW:
+ mode = IOPC_TM_LOW;
+ level_triggered = 1;
+ break;
+ case IRQT_RISING:
+ mode = IOPC_TM_RISING;
+ break;
+ case IRQT_FALLING:
+ mode = IOPC_TM_FALLING;
+ break;
+ case IRQT_BOTHEDGE:
+ mode = IOPC_TM_EDGE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (irqno) {
+ case KS8695_IRQ_EXTERN0:
+ ctrl &= ~IOPC_IOEINT0TM;
+ ctrl |= IOPC_IOEINT0_MODE(mode);
+ break;
+ case KS8695_IRQ_EXTERN1:
+ ctrl &= ~IOPC_IOEINT1TM;
+ ctrl |= IOPC_IOEINT1_MODE(mode);
+ break;
+ case KS8695_IRQ_EXTERN2:
+ ctrl &= ~IOPC_IOEINT2TM;
+ ctrl |= IOPC_IOEINT2_MODE(mode);
+ break;
+ case KS8695_IRQ_EXTERN3:
+ ctrl &= ~IOPC_IOEINT3TM;
+ ctrl |= IOPC_IOEINT3_MODE(mode);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (level_triggered) {
+ set_irq_chip(irqno, &ks8695_irq_level_chip);
+ set_irq_handler(irqno, handle_level_irq);
+ }
+ else {
+ set_irq_chip(irqno, &ks8695_irq_edge_chip);
+ set_irq_handler(irqno, handle_edge_irq);
+ }
+
+ __raw_writel(ctrl, KS8695_GPIO_VA + KS8695_IOPC);
+ return 0;
+}
+
+static struct irq_chip ks8695_irq_level_chip = {
+ .ack = ks8695_irq_mask,
+ .mask = ks8695_irq_mask,
+ .unmask = ks8695_irq_unmask,
+ .set_type = ks8695_irq_set_type,
+};
+
+static struct irq_chip ks8695_irq_edge_chip = {
+ .ack = ks8695_irq_ack,
+ .mask = ks8695_irq_mask,
+ .unmask = ks8695_irq_unmask,
+ .set_type = ks8695_irq_set_type,
+};
+
+void __init ks8695_init_irq(void)
+{
+ unsigned int irq;
+
+ /* Disable all interrupts initially */
+ __raw_writel(0, KS8695_IRQ_VA + KS8695_INTMC);
+ __raw_writel(0, KS8695_IRQ_VA + KS8695_INTEN);
+
+ for (irq = 0; irq < NR_IRQS; irq++) {
+ switch (irq) {
+ /* Level-triggered interrupts */
+ case KS8695_IRQ_BUS_ERROR:
+ case KS8695_IRQ_UART_MODEM_STATUS:
+ case KS8695_IRQ_UART_LINE_STATUS:
+ case KS8695_IRQ_UART_RX:
+ case KS8695_IRQ_COMM_TX:
+ case KS8695_IRQ_COMM_RX:
+ set_irq_chip(irq, &ks8695_irq_level_chip);
+ set_irq_handler(irq, handle_level_irq);
+ break;
+
+ /* Edge-triggered interrupts */
+ default:
+ ks8695_irq_ack(irq); /* clear pending bit */
+ set_irq_chip(irq, &ks8695_irq_edge_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ }
+
+ set_irq_flags(irq, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
new file mode 100644
index 00000000000..d2c86e4a72e
--- /dev/null
+++ b/arch/arm/mach-ks8695/time.c
@@ -0,0 +1,114 @@
+/*
+ * arch/arm/mach-ks8695/time.c
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#include <asm/io.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/regs-timer.h>
+#include <asm/arch/regs-irq.h>
+
+#include "generic.h"
+
+/*
+ * Returns number of ms since last clock interrupt. Note that interrupts
+ * will have been disabled by do_gettimeoffset()
+ */
+static unsigned long ks8695_gettimeoffset (void)
+{
+ unsigned long elapsed, tick2, intpending;
+
+ /*
+ * Get the current number of ticks. Note that there is a race
+ * condition between us reading the timer and checking for an
+ * interrupt. We solve this by ensuring that the counter has not
+ * reloaded between our two reads.
+ */
+ elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
+ do {
+ tick2 = elapsed;
+ intpending = __raw_readl(KS8695_IRQ_VA + KS8695_INTST) & (1 << KS8695_IRQ_TIMER1);
+ elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
+ } while (elapsed > tick2);
+
+ /* Convert to number of ticks expired (not remaining) */
+ elapsed = (CLOCK_TICK_RATE / HZ) - elapsed;
+
+ /* Is interrupt pending? If so, then timer has been reloaded already. */
+ if (intpending)
+ elapsed += (CLOCK_TICK_RATE / HZ);
+
+ /* Convert ticks to usecs */
+ return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer.
+ */
+static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id)
+{
+ write_seqlock(&xtime_lock);
+ timer_tick();
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction ks8695_timer_irq = {
+ .name = "ks8695_tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = ks8695_timer_interrupt,
+};
+
+static void ks8695_timer_setup(void)
+{
+ unsigned long tmout = CLOCK_TICK_RATE / HZ;
+ unsigned long tmcon;
+
+ /* disable timer1 */
+ tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+ __raw_writel(tmcon & ~TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
+
+ __raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1TC);
+ __raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1PD);
+
+ /* re-enable timer1 */
+ __raw_writel(tmcon | TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
+}
+
+static void __init ks8695_timer_init (void)
+{
+ ks8695_timer_setup();
+
+ /* Enable timer interrupts */
+ setup_irq(KS8695_IRQ_TIMER1, &ks8695_timer_irq);
+}
+
+struct sys_timer ks8695_timer = {
+ .init = ks8695_timer_init,
+ .offset = ks8695_gettimeoffset,
+ .resume = ks8695_timer_setup,
+};
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index ad519390dd5..48c8c9195dc 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -326,7 +326,7 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
.ctrl_name = "internal",
};
-static struct omap_board_config_kernel h2_config[] = {
+static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_USB, &h2_usb_config },
{ OMAP_TAG_MMC, &h2_mmc_config },
{ OMAP_TAG_UART, &h2_uart_config },
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 6f4ea4bda5e..8caee68aa09 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -1,4 +1,3 @@
-//kernel/linux-omap-fsample/arch/arm/mach-omap1/pm.c#3 - integrate change 4545 (text)
/*
* linux/arch/arm/mach-omap1/pm.c
*
@@ -377,7 +376,7 @@ void omap_pm_suspend(void)
* Jump to assembly code. The processor will stay there
* until wake up.
*/
- omap_sram_suspend(arg0, arg1);
+ omap_sram_suspend(arg0, arg1);
/*
* If we are here, processor is woken up!
@@ -631,10 +630,6 @@ static int omap_pm_prepare(suspend_state_t state)
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
break;
-
- case PM_SUSPEND_DISK:
- return -ENOTSUPP;
-
default:
return -EINVAL;
}
@@ -657,10 +652,6 @@ static int omap_pm_enter(suspend_state_t state)
case PM_SUSPEND_MEM:
omap_pm_suspend();
break;
-
- case PM_SUSPEND_DISK:
- return -ENOTSUPP;
-
default:
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 54c836a9845..e290b989aa9 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -54,7 +54,7 @@
static struct resource gpmc_mem_root;
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
-static spinlock_t gpmc_mem_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(gpmc_mem_lock);
static unsigned gpmc_cs_map;
static void __iomem *gpmc_base =
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index f538d0fdb13..0439906d5da 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -43,7 +43,7 @@ struct pin_config __initdata_or_module omap24xx_pins[] = {
/* 24xx I2C */
MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1)
MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1)
-MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 0, 1)
+MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 1, 1)
MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1)
/* Menelaus interrupt */
@@ -52,7 +52,9 @@ MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1)
/* 24xx clocks */
MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1)
-/* 24xx GPMC wait pin monitoring */
+/* 24xx GPMC chipselects, wait pin monitoring */
+MUX_CFG_24XX("E2_GPMC_NCS2", 0x08e, 0, 1, 1, 1)
+MUX_CFG_24XX("L2_GPMC_NCS7", 0x093, 0, 1, 1, 1)
MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1)
MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1)
MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1)
@@ -66,6 +68,7 @@ MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1)
/* 24xx GPIO */
MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
+MUX_CFG_24XX("P21_242X_GPIO12", 0x0ca, 3, 0, 0, 1)
MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1)
MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
@@ -75,7 +78,9 @@ MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1)
MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1)
MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1)
+MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1)
MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1)
+MUX_CFG_24XX("P14_24XX_GPIO125", 0x140, 3, 1, 1, 1)
/* 242x DBG GPIO */
MUX_CFG_24XX("V4_242X_GPIO49", 0xd3, 3, 0, 0, 1)
@@ -118,6 +123,30 @@ MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3", 0x0fc, 0, 0, 0, 1)
MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR", 0x0fd, 0, 0, 0, 1)
MUX_CFG_24XX("H15_24XX_MMC_CLKI", 0x0fe, 0, 0, 0, 1)
+/* Full speed USB */
+MUX_CFG_24XX("J20_24XX_USB0_PUEN", 0x11d, 0, 0, 0, 1)
+MUX_CFG_24XX("J19_24XX_USB0_VP", 0x11e, 0, 0, 0, 1)
+MUX_CFG_24XX("K20_24XX_USB0_VM", 0x11f, 0, 0, 0, 1)
+MUX_CFG_24XX("J18_24XX_USB0_RCV", 0x120, 0, 0, 0, 1)
+MUX_CFG_24XX("K19_24XX_USB0_TXEN", 0x121, 0, 0, 0, 1)
+MUX_CFG_24XX("J14_24XX_USB0_SE0", 0x122, 0, 0, 0, 1)
+MUX_CFG_24XX("K18_24XX_USB0_DAT", 0x123, 0, 0, 0, 1)
+
+MUX_CFG_24XX("N14_24XX_USB1_SE0", 0x0ed, 2, 0, 0, 1)
+MUX_CFG_24XX("W12_24XX_USB1_SE0", 0x0dd, 3, 0, 0, 1)
+MUX_CFG_24XX("P15_24XX_USB1_DAT", 0x0ee, 2, 0, 0, 1)
+MUX_CFG_24XX("R13_24XX_USB1_DAT", 0x0e0, 3, 0, 0, 1)
+MUX_CFG_24XX("W20_24XX_USB1_TXEN", 0x0ec, 2, 0, 0, 1)
+MUX_CFG_24XX("P13_24XX_USB1_TXEN", 0x0df, 3, 0, 0, 1)
+MUX_CFG_24XX("V19_24XX_USB1_RCV", 0x0eb, 2, 0, 0, 1)
+MUX_CFG_24XX("V12_24XX_USB1_RCV", 0x0de, 3, 0, 0, 1)
+
+MUX_CFG_24XX("AA10_24XX_USB2_SE0", 0x0e5, 2, 0, 0, 1)
+MUX_CFG_24XX("Y11_24XX_USB2_DAT", 0x0e8, 2, 0, 0, 1)
+MUX_CFG_24XX("AA12_24XX_USB2_TXEN", 0x0e9, 2, 0, 0, 1)
+MUX_CFG_24XX("AA6_24XX_USB2_RCV", 0x0e6, 2, 0, 0, 1)
+MUX_CFG_24XX("AA4_24XX_USB2_TLLSE0", 0x0e7, 2, 0, 0, 1)
+
/* Keypad GPIO*/
MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1)
MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1)
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index d6a279e4b52..f7009d845be 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -47,7 +47,7 @@ static struct ll_pool {
int count;
} ll_pool;
-static spinlock_t ll_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(ll_lock);
struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma)
{
@@ -135,7 +135,7 @@ static inline void dma_decrement_usage(void)
}
}
-static spinlock_t dma_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(dma_lock);
static inline void pnx4008_dma_lock(void)
{
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 119c64b7223..28c79bd0a3a 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -24,6 +24,7 @@
#include <linux/delay.h>
#include <linux/serial_8250.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <asm/types.h>
@@ -55,23 +56,31 @@
static struct mtd_partition trizeps4_partitions[] = {
{
.name = "Bootloader",
+ .offset = 0x00000000,
.size = 0x00040000,
- .offset = 0,
.mask_flags = MTD_WRITEABLE /* force read-only */
},{
- .name = "Kernel",
- .size = 0x00400000,
- .offset = 0x00040000
+ .name = "Backup",
+ .offset = 0x00040000,
+ .size = 0x00040000,
+ },{
+ .name = "Image",
+ .offset = 0x00080000,
+ .size = 0x01080000,
+ },{
+ .name = "IPSM",
+ .offset = 0x01100000,
+ .size = 0x00e00000,
},{
- .name = "Filesystem",
+ .name = "Registry",
+ .offset = 0x01f00000,
.size = MTDPART_SIZ_FULL,
- .offset = 0x00440000
}
};
-static struct flash_platform_data trizeps4_flash_data[] = {
+static struct physmap_flash_data trizeps4_flash_data[] = {
{
- .map_name = "cfi_probe",
+ .width = 4, /* bankwidth in bytes */
.parts = trizeps4_partitions,
.nr_parts = ARRAY_SIZE(trizeps4_partitions)
}
@@ -79,15 +88,15 @@ static struct flash_platform_data trizeps4_flash_data[] = {
static struct resource flash_resource = {
.start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device flash_device = {
- .name = "pxa2xx-flash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
- .platform_data = &trizeps4_flash_data,
+ .platform_data = trizeps4_flash_data,
},
.resource = &flash_resource,
.num_resources = 1,
@@ -393,11 +402,37 @@ static struct pxafb_mach_info sharp_lcd = {
.pxafb_backlight_power = board_backlight_power,
};
+static struct pxafb_mode_info toshiba_lcd_mode = {
+ .pixclock = 39720,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 8,
+ .hsync_len = 63,
+ .left_margin = 12,
+ .right_margin = 12,
+ .vsync_len = 4,
+ .upper_margin = 32,
+ .lower_margin = 10,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info toshiba_lcd = {
+ .modes = &toshiba_lcd_mode,
+ .num_modes = 1,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .lccr0 = LCCR0_Color | LCCR0_Act,
+ .lccr3 = 0x03400002,
+ .pxafb_backlight_power = board_backlight_power,
+};
+
static void __init trizeps4_init(void)
{
platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
- set_pxa_fb_info(&sharp_lcd);
+/* set_pxa_fb_info(&sharp_lcd); */
+ set_pxa_fb_info(&toshiba_lcd);
pxa_set_mci_info(&trizeps4_mci_platform_data);
pxa_set_ficp_info(&trizeps4_ficp_platform_data);
@@ -436,9 +471,10 @@ static void __init trizeps4_map_io(void)
/* whats that for ??? */
pxa_gpio_mode(GPIO79_nCS_3_MD);
+#ifdef CONFIG_LEDS
pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */
pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */
-
+#endif
#ifdef CONFIG_MACH_TRIZEPS4_CONXS
#ifdef CONFIG_IDE_PXA_CF
/* if boot direct from compact flash dont disable power */
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 9a3d3d24c08..3e7a85594d9 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_S3C2410_CLOCK) += clock.o
# Machine support
obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
+obj-$(CONFIG_ARCH_H1940) += mach-h1940.o h1940-bluetooth.o
obj-$(CONFIG_PM_H1940) += pm-h1940.o
obj-$(CONFIG_MACH_N30) += mach-n30.o
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
new file mode 100644
index 00000000000..3c48886521e
--- /dev/null
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -0,0 +1,142 @@
+/*
+ * arch/arm/mach-s3c2410/h1940-bluetooth.c
+ * Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * S3C2410 bluetooth "driver"
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/hardware.h>
+#include <asm/arch/h1940-latch.h>
+
+#define DRV_NAME "h1940-bt"
+
+#ifdef CONFIG_LEDS_H1940
+DEFINE_LED_TRIGGER(bt_led_trigger);
+#endif
+
+static int state;
+
+/* Bluetooth control */
+static void h1940bt_enable(int on)
+{
+ if (on) {
+#ifdef CONFIG_LEDS_H1940
+ /* flashing Blue */
+ led_trigger_event(bt_led_trigger, LED_HALF);
+#endif
+
+ /* Power on the chip */
+ h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
+ /* Reset the chip */
+ mdelay(10);
+ s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+ mdelay(10);
+ s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+
+ state = 1;
+ }
+ else {
+#ifdef CONFIG_LEDS_H1940
+ led_trigger_event(bt_led_trigger, 0);
+#endif
+
+ s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+ mdelay(10);
+ s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+ mdelay(10);
+ h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
+
+ state = 0;
+ }
+}
+
+static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", state);
+}
+
+static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ int new_state;
+ char *endp;
+
+ new_state = simple_strtoul(buf, &endp, 0);
+ if (*endp && !isspace(*endp))
+ return -EINVAL;
+
+ h1940bt_enable(new_state);
+
+ return count;
+}
+static DEVICE_ATTR(enable, 0644,
+ h1940bt_show,
+ h1940bt_store);
+
+static int __init h1940bt_probe(struct platform_device *pdev)
+{
+ /* Configures BT serial port GPIOs */
+ s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
+ s3c2410_gpio_pullup(S3C2410_GPH0, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
+ s3c2410_gpio_pullup(S3C2410_GPH1, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
+ s3c2410_gpio_pullup(S3C2410_GPH2, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
+ s3c2410_gpio_pullup(S3C2410_GPH3, 1);
+
+#ifdef CONFIG_LEDS_H1940
+ led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
+#endif
+
+ /* disable BT by default */
+ h1940bt_enable(0);
+
+ return device_create_file(&pdev->dev, &dev_attr_enable);
+}
+
+static int h1940bt_remove(struct platform_device *pdev)
+{
+#ifdef CONFIG_LEDS_H1940
+ led_trigger_unregister_simple(bt_led_trigger);
+#endif
+ return 0;
+}
+
+
+static struct platform_driver h1940bt_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .probe = h1940bt_probe,
+ .remove = h1940bt_remove,
+};
+
+
+static int __init h1940bt_init(void)
+{
+ return platform_driver_register(&h1940bt_driver);
+}
+
+static void __exit h1940bt_exit(void)
+{
+ platform_driver_unregister(&h1940bt_driver);
+}
+
+module_init(h1940bt_init);
+module_exit(h1940bt_exit);
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
+MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 5d5f00e9c46..5ccd0be23a3 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -177,6 +177,11 @@ static struct platform_device s3c_device_leds = {
.id = -1,
};
+static struct platform_device s3c_device_bluetooth = {
+ .name = "h1940-bt",
+ .id = -1,
+};
+
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
@@ -185,6 +190,7 @@ static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_iis,
&s3c_device_usbgadget,
&s3c_device_leds,
+ &s3c_device_bluetooth,
};
static void __init h1940_map_io(void)
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index dd2272fb113..0b6e360aeae 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -791,6 +791,10 @@ static struct clk init_clocks[] = {
.name = "usb-bus-host",
.id = -1,
.parent = &clk_usb_bus_host,
+ }, { .name = "ac97",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = S3C2443_PCLKCON_AC97,
}
};
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index b81391a4e37..15f0284010c 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -131,8 +131,8 @@ config CPU_ARM920T
# ARM922T
config CPU_ARM922T
bool "Support ARM922T processor" if ARCH_INTEGRATOR
- depends on ARCH_LH7A40X || ARCH_INTEGRATOR
- default y if ARCH_LH7A40X
+ depends on ARCH_LH7A40X || ARCH_INTEGRATOR || ARCH_KS8695
+ default y if ARCH_LH7A40X || ARCH_KS8695
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
@@ -143,7 +143,7 @@ config CPU_ARM922T
help
The ARM922T is a version of the ARM920T, but with smaller
instruction and data caches. It is used in Altera's
- Excalibur XA device family.
+ Excalibur XA device family and Micrel's KS8695 Centaur.
Say Y if you want support for the ARM922T processor.
Otherwise, say N.
@@ -171,8 +171,8 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 2d86b106ff3..55a4d3be16b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -747,7 +747,7 @@ int omap_set_dma_callback(int lch,
*/
dma_addr_t omap_get_dma_src_pos(int lch)
{
- dma_addr_t offset;
+ dma_addr_t offset = 0;
if (cpu_class_is_omap1())
offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) |
@@ -769,7 +769,7 @@ dma_addr_t omap_get_dma_src_pos(int lch)
*/
dma_addr_t omap_get_dma_dst_pos(int lch)
{
- dma_addr_t offset;
+ dma_addr_t offset = 0;
if (cpu_class_is_omap1())
offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) |
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 6c798d28868..75211f20ccb 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -83,10 +83,21 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
reg |= OMAP24XX_PULL_ENA;
if(cfg->pu_pd_val)
reg |= OMAP24XX_PULL_UP;
-#ifdef CONFIG_OMAP_MUX_DEBUG
- printk("Muxing %s (0x%08x): 0x%02x -> 0x%02x\n",
- cfg->name, OMAP24XX_L4_BASE + cfg->mux_reg,
- omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg), reg);
+#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+ {
+ u8 orig = omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg);
+ u8 debug = 0;
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+ debug = cfg->debug;
+#endif
+ warn = (orig != reg);
+ if (debug || warn)
+ printk("MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
+ cfg->name,
+ OMAP24XX_L4_BASE + cfg->mux_reg,
+ orig, reg);
+ }
#endif
omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index b1142ce4ac4..0a9a5e7f62e 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Mon Apr 16 21:01:04 2007
+# Last update: Fri May 11 19:53:41 2007
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -1335,3 +1335,35 @@ at91sam9rlek MACH_AT91SAM9RLEK AT91SAM9RLEK 1326
comtech_router MACH_COMTECH_ROUTER COMTECH_ROUTER 1327
sbc2410x MACH_SBC2410X SBC2410X 1328
at4x0bd MACH_AT4X0BD AT4X0BD 1329
+cbifr MACH_CBIFR CBIFR 1330
+arcom_quantum MACH_ARCOM_QUANTUM ARCOM_QUANTUM 1331
+matrix520 MACH_MATRIX520 MATRIX520 1332
+matrix510 MACH_MATRIX510 MATRIX510 1333
+matrix500 MACH_MATRIX500 MATRIX500 1334
+m501 MACH_M501 M501 1335
+aaeon1270 MACH_AAEON1270 AAEON1270 1336
+matrix500ev MACH_MATRIX500EV MATRIX500EV 1337
+pac500 MACH_PAC500 PAC500 1338
+pnx8181 MACH_PNX8181 PNX8181 1339
+colibri320 MACH_COLIBRI320 COLIBRI320 1340
+aztoolbb MACH_AZTOOLBB AZTOOLBB 1341
+aztoolg2 MACH_AZTOOLG2 AZTOOLG2 1342
+dvlhost MACH_DVLHOST DVLHOST 1343
+zir9200 MACH_ZIR9200 ZIR9200 1344
+zir9260 MACH_ZIR9260 ZIR9260 1345
+cocopah MACH_COCOPAH COCOPAH 1346
+nds MACH_NDS NDS 1347
+rosencrantz MACH_ROSENCRANTZ ROSENCRANTZ 1348
+fttx_odsc MACH_FTTX_ODSC FTTX_ODSC 1349
+classe_r6904 MACH_CLASSE_R6904 CLASSE_R6904 1350
+cam60 MACH_CAM60 CAM60 1351
+mxc30031ads MACH_MXC30031ADS MXC30031ADS 1352
+datacall MACH_DATACALL DATACALL 1353
+at91eb01 MACH_AT91EB01 AT91EB01 1354
+rty MACH_RTY RTY 1355
+dwl2100 MACH_DWL2100 DWL2100 1356
+vinsi MACH_VINSI VINSI 1357
+db88f5281 MACH_DB88F5281 DB88F5281 1358
+csb726 MACH_CSB726 CSB726 1359
+tik27 MACH_TIK27 TIK27 1360
+mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index dbc8ee2adcf..c791a46df46 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -60,6 +60,18 @@ struct pata_icside_state {
struct scatterlist sg[PATA_ICSIDE_MAX_SG];
};
+struct pata_icside_info {
+ struct pata_icside_state *state;
+ struct expansion_card *ec;
+ void __iomem *base;
+ void __iomem *irqaddr;
+ unsigned int irqmask;
+ const expansioncard_ops_t *irqops;
+ unsigned int mwdma_mask;
+ unsigned int nr_ports;
+ const struct portinfo *port[2];
+};
+
#define ICS_TYPE_A3IN 0
#define ICS_TYPE_A3USER 1
#define ICS_TYPE_V6 3
@@ -269,9 +281,10 @@ static u8 pata_icside_bmdma_status(struct ata_port *ap)
return readb(irq_port) & 1 ? ATA_DMA_INTR : 0;
}
-static int icside_dma_init(struct ata_probe_ent *ae, struct expansion_card *ec)
+static int icside_dma_init(struct pata_icside_info *info)
{
- struct pata_icside_state *state = ae->private_data;
+ struct pata_icside_state *state = info->state;
+ struct expansion_card *ec = info->ec;
int i;
for (i = 0; i < ATA_MAX_DEVICES; i++) {
@@ -281,7 +294,7 @@ static int icside_dma_init(struct ata_probe_ent *ae, struct expansion_card *ec)
if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
state->dma = ec->dma;
- ae->mwdma_mask = 0x07; /* MW0..2 */
+ info->mwdma_mask = 0x07; /* MW0..2 */
}
return 0;
@@ -371,6 +384,8 @@ static struct ata_port_operations pata_icside_port_ops = {
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
+ .cable_detect = ata_cable_40wire,
+
.bmdma_setup = pata_icside_bmdma_setup,
.bmdma_start = pata_icside_bmdma_start,
@@ -385,7 +400,6 @@ static struct ata_port_operations pata_icside_port_ops = {
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = pata_icside_bmdma_stop,
- .irq_handler = ata_interrupt,
.irq_clear = ata_dummy_noret,
.irq_on = ata_irq_on,
.irq_ack = pata_icside_irq_ack,
@@ -396,11 +410,10 @@ static struct ata_port_operations pata_icside_port_ops = {
.bmdma_status = pata_icside_bmdma_status,
};
-static void
-pata_icside_add_port(struct ata_probe_ent *ae, void __iomem *base,
- const struct portinfo *info)
+static void __devinit
+pata_icside_setup_ioaddr(struct ata_ioports *ioaddr, void __iomem *base,
+ const struct portinfo *info)
{
- struct ata_ioports *ioaddr = &ae->port[ae->n_ports++];
void __iomem *cmd = base + info->dataoffset;
ioaddr->cmd_addr = cmd;
@@ -419,58 +432,44 @@ pata_icside_add_port(struct ata_probe_ent *ae, void __iomem *base,
ioaddr->altstatus_addr = ioaddr->ctl_addr;
}
-static int __init
-pata_icside_register_v5(struct ata_probe_ent *ae, struct expansion_card *ec)
+static int __devinit pata_icside_register_v5(struct pata_icside_info *info)
{
- struct pata_icside_state *state = ae->private_data;
+ struct pata_icside_state *state = info->state;
void __iomem *base;
- base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
- ecard_resource_len(ec, ECARD_RES_MEMC));
+ base = ecardm_iomap(info->ec, ECARD_RES_MEMC, 0, 0);
if (!base)
return -ENOMEM;
state->irq_port = base;
- ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
- ec->irqmask = 1;
- ec->irq_data = state;
- ec->ops = &pata_icside_ops_arcin_v5;
-
- /*
- * Be on the safe side - disable interrupts
- */
- ec->ops->irqdisable(ec, ec->irq);
-
- pata_icside_add_port(ae, base, &pata_icside_portinfo_v5);
+ info->base = base;
+ info->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
+ info->irqmask = 1;
+ info->irqops = &pata_icside_ops_arcin_v5;
+ info->nr_ports = 1;
+ info->port[0] = &pata_icside_portinfo_v5;
return 0;
}
-static int __init
-pata_icside_register_v6(struct ata_probe_ent *ae, struct expansion_card *ec)
+static int __devinit pata_icside_register_v6(struct pata_icside_info *info)
{
- struct pata_icside_state *state = ae->private_data;
+ struct pata_icside_state *state = info->state;
+ struct expansion_card *ec = info->ec;
void __iomem *ioc_base, *easi_base;
unsigned int sel = 0;
- int ret;
- ioc_base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
- ecard_resource_len(ec, ECARD_RES_IOCFAST));
- if (!ioc_base) {
- ret = -ENOMEM;
- goto out;
- }
+ ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
+ if (!ioc_base)
+ return -ENOMEM;
easi_base = ioc_base;
if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
- easi_base = ioremap(ecard_resource_start(ec, ECARD_RES_EASI),
- ecard_resource_len(ec, ECARD_RES_EASI));
- if (!easi_base) {
- ret = -ENOMEM;
- goto unmap_slot;
- }
+ easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0);
+ if (!easi_base)
+ return -ENOMEM;
/*
* Enable access to the EASI region.
@@ -480,45 +479,72 @@ pata_icside_register_v6(struct ata_probe_ent *ae, struct expansion_card *ec)
writeb(sel, ioc_base);
- ec->irq_data = state;
- ec->ops = &pata_icside_ops_arcin_v6;
-
state->irq_port = easi_base;
state->ioc_base = ioc_base;
state->port[0].port_sel = sel;
state->port[1].port_sel = sel | 1;
/*
- * Be on the safe side - disable interrupts
- */
- ec->ops->irqdisable(ec, ec->irq);
-
- /*
- * Find and register the interfaces.
- */
- pata_icside_add_port(ae, easi_base, &pata_icside_portinfo_v6_1);
- pata_icside_add_port(ae, easi_base, &pata_icside_portinfo_v6_2);
-
- /*
* FIXME: work around libata's aversion to calling port_disable.
* This permanently disables interrupts on port 0 - bad luck if
* you have a drive on that port.
*/
state->port[0].disabled = 1;
- return icside_dma_init(ae, ec);
+ info->base = easi_base;
+ info->irqops = &pata_icside_ops_arcin_v6;
+ info->nr_ports = 2;
+ info->port[0] = &pata_icside_portinfo_v6_1;
+ info->port[1] = &pata_icside_portinfo_v6_2;
- unmap_slot:
- iounmap(ioc_base);
- out:
- return ret;
+ return icside_dma_init(info);
+}
+
+static int __devinit pata_icside_add_ports(struct pata_icside_info *info)
+{
+ struct expansion_card *ec = info->ec;
+ struct ata_host *host;
+ int i;
+
+ if (info->irqaddr) {
+ ec->irqaddr = info->irqaddr;
+ ec->irqmask = info->irqmask;
+ }
+ if (info->irqops)
+ ecard_setirq(ec, info->irqops, info->state);
+
+ /*
+ * Be on the safe side - disable interrupts
+ */
+ ec->ops->irqdisable(ec, ec->irq);
+
+ host = ata_host_alloc(&ec->dev, info->nr_ports);
+ if (!host)
+ return -ENOMEM;
+
+ host->private_data = info->state;
+ host->flags = ATA_HOST_SIMPLEX;
+
+ for (i = 0; i < info->nr_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ap->pio_mask = 0x1f;
+ ap->mwdma_mask = info->mwdma_mask;
+ ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+ ap->ops = &pata_icside_port_ops;
+
+ pata_icside_setup_ioaddr(&ap->ioaddr, info->base, info->port[i]);
+ }
+
+ return ata_host_activate(host, ec->irq, ata_interrupt, 0,
+ &pata_icside_sht);
}
static int __devinit
pata_icside_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct pata_icside_state *state;
- struct ata_probe_ent ae;
+ struct pata_icside_info info;
void __iomem *idmem;
int ret;
@@ -526,7 +552,7 @@ pata_icside_probe(struct expansion_card *ec, const struct ecard_id *id)
if (ret)
goto out;
- state = kzalloc(sizeof(struct pata_icside_state), GFP_KERNEL);
+ state = devm_kzalloc(&ec->dev, sizeof(*state), GFP_KERNEL);
if (!state) {
ret = -ENOMEM;
goto release;
@@ -535,8 +561,7 @@ pata_icside_probe(struct expansion_card *ec, const struct ecard_id *id)
state->type = ICS_TYPE_NOTYPE;
state->dma = NO_DMA;
- idmem = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
- ecard_resource_len(ec, ECARD_RES_IOCFAST));
+ idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (idmem) {
unsigned int type;
@@ -544,21 +569,14 @@ pata_icside_probe(struct expansion_card *ec, const struct ecard_id *id)
type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
- iounmap(idmem);
+ ecardm_iounmap(ec, idmem);
state->type = type;
}
- memset(&ae, 0, sizeof(ae));
- INIT_LIST_HEAD(&ae.node);
- ae.dev = &ec->dev;
- ae.port_ops = &pata_icside_port_ops;
- ae.sht = &pata_icside_sht;
- ae.pio_mask = 0x1f;
- ae.irq = ec->irq;
- ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
- ae._host_flags = ATA_HOST_SIMPLEX;
- ae.private_data = state;
+ memset(&info, 0, sizeof(info));
+ info.state = state;
+ info.ec = ec;
switch (state->type) {
case ICS_TYPE_A3IN:
@@ -572,11 +590,11 @@ pata_icside_probe(struct expansion_card *ec, const struct ecard_id *id)
break;
case ICS_TYPE_V5:
- ret = pata_icside_register_v5(&ae, ec);
+ ret = pata_icside_register_v5(&info);
break;
case ICS_TYPE_V6:
- ret = pata_icside_register_v6(&ae, ec);
+ ret = pata_icside_register_v6(&info);
break;
default:
@@ -586,12 +604,11 @@ pata_icside_probe(struct expansion_card *ec, const struct ecard_id *id)
}
if (ret == 0)
- ret = ata_device_add(&ae) == 0 ? -ENODEV : 0;
+ ret = pata_icside_add_ports(&info);
if (ret == 0)
goto out;
- kfree(state);
release:
ecard_release_resources(ec);
out:
@@ -609,8 +626,7 @@ static void pata_icside_shutdown(struct expansion_card *ec)
* this register via that region.
*/
local_irq_save(flags);
- if (ec->ops)
- ec->ops->irqdisable(ec, ec->irq);
+ ec->ops->irqdisable(ec, ec->irq);
local_irq_restore(flags);
/*
@@ -638,17 +654,9 @@ static void __devexit pata_icside_remove(struct expansion_card *ec)
* don't NULL out the drvdata - devres/libata wants it
* to free the ata_host structure.
*/
- ec->ops = NULL;
- ec->irq_data = NULL;
-
if (state->dma != NO_DMA)
free_dma(state->dma);
- if (state->ioc_base)
- iounmap(state->ioc_base);
- if (state->ioc_base != state->irq_port)
- iounmap(state->irq_port);
- kfree(state);
ecard_release_resources(ec);
}
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 1fe0457243d..66f826252ae 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -565,8 +565,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
ide_hwif_t *hwif;
void __iomem *base;
- base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
- ecard_resource_len(ec, ECARD_RES_MEMC));
+ base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
if (!base)
return -ENOMEM;
@@ -574,8 +573,8 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
ec->irqmask = 1;
- ec->irq_data = state;
- ec->ops = &icside_ops_arcin_v5;
+
+ ecard_setirq(ec, &icside_ops_arcin_v5, state);
/*
* Be on the safe side - disable interrupts
@@ -583,10 +582,8 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
icside_irqdisable_arcin_v5(ec, 0);
hwif = icside_setup(base, &icside_cardinfo_v5, ec);
- if (!hwif) {
- iounmap(base);
+ if (!hwif)
return -ENODEV;
- }
state->hwif[0] = hwif;
@@ -605,8 +602,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
unsigned int sel = 0;
int ret;
- ioc_base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
- ecard_resource_len(ec, ECARD_RES_IOCFAST));
+ ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (!ioc_base) {
ret = -ENOMEM;
goto out;
@@ -615,11 +611,10 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
easi_base = ioc_base;
if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
- easi_base = ioremap(ecard_resource_start(ec, ECARD_RES_EASI),
- ecard_resource_len(ec, ECARD_RES_EASI));
+ easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0);
if (!easi_base) {
ret = -ENOMEM;
- goto unmap_slot;
+ goto out;
}
/*
@@ -630,8 +625,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
writeb(sel, ioc_base);
- ec->irq_data = state;
- ec->ops = &icside_ops_arcin_v6;
+ ecard_setirq(ec, &icside_ops_arcin_v6, state);
state->irq_port = easi_base;
state->ioc_base = ioc_base;
@@ -649,7 +643,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
if (!hwif || !mate) {
ret = -ENODEV;
- goto unmap_port;
+ goto out;
}
state->hwif[0] = hwif;
@@ -686,11 +680,6 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
return 0;
- unmap_port:
- if (easi_base != ioc_base)
- iounmap(easi_base);
- unmap_slot:
- iounmap(ioc_base);
out:
return ret;
}
@@ -716,8 +705,7 @@ icside_probe(struct expansion_card *ec, const struct ecard_id *id)
state->type = ICS_TYPE_NOTYPE;
state->dev = &ec->dev;
- idmem = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
- ecard_resource_len(ec, ECARD_RES_IOCFAST));
+ idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (idmem) {
unsigned int type;
@@ -725,7 +713,7 @@ icside_probe(struct expansion_card *ec, const struct ecard_id *id)
type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
- iounmap(idmem);
+ ecardm_iounmap(ec, idmem);
state->type = type;
}
@@ -793,13 +781,6 @@ static void __devexit icside_remove(struct expansion_card *ec)
}
ecard_set_drvdata(ec, NULL);
- ec->ops = NULL;
- ec->irq_data = NULL;
-
- if (state->ioc_base)
- iounmap(state->ioc_base);
- if (state->ioc_base != state->irq_port)
- iounmap(state->irq_port);
kfree(state);
ecard_release_resources(ec);
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index 890ea3fac3c..83811af1161 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -63,8 +63,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
if (ret)
goto out;
- base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
- ecard_resource_len(ec, ECARD_RES_MEMC));
+ base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
if (!base) {
ret = -ENOMEM;
goto release;
@@ -81,7 +80,6 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
goto out;
}
- iounmap(base);
release:
ecard_release_resources(ec);
out:
@@ -96,7 +94,6 @@ static void __devexit rapide_remove(struct expansion_card *ec)
/* there must be a better way */
ide_unregister(hwif - ide_hwifs);
- iounmap(hwif->hwif_data);
ecard_release_resources(ec);
}
diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c
index f075cebe84a..f21148e7b57 100644
--- a/drivers/net/arm/ether1.c
+++ b/drivers/net/arm/ether1.c
@@ -1014,8 +1014,7 @@ ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
SET_NETDEV_DEV(dev, &ec->dev);
dev->irq = ec->irq;
- priv(dev)->base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
- ecard_resource_len(ec, ECARD_RES_IOCFAST));
+ priv(dev)->base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (!priv(dev)->base) {
ret = -ENOMEM;
goto free;
@@ -1056,8 +1055,6 @@ ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
return 0;
free:
- if (priv(dev)->base)
- iounmap(priv(dev)->base);
free_netdev(dev);
release:
ecard_release_resources(ec);
@@ -1072,7 +1069,6 @@ static void __devexit ether1_remove(struct expansion_card *ec)
ecard_set_drvdata(ec, NULL);
unregister_netdev(dev);
- iounmap(priv(dev)->base);
free_netdev(dev);
ecard_release_resources(ec);
}
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
index 32da2eb9bce..da713500654 100644
--- a/drivers/net/arm/ether3.c
+++ b/drivers/net/arm/ether3.c
@@ -793,8 +793,7 @@ ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &ec->dev);
- priv(dev)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
- ecard_resource_len(ec, ECARD_RES_MEMC));
+ priv(dev)->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
if (!priv(dev)->base) {
ret = -ENOMEM;
goto free;
@@ -869,8 +868,6 @@ ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
return 0;
free:
- if (priv(dev)->base)
- iounmap(priv(dev)->base);
free_netdev(dev);
release:
ecard_release_resources(ec);
@@ -885,7 +882,6 @@ static void __devexit ether3_remove(struct expansion_card *ec)
ecard_set_drvdata(ec, NULL);
unregister_netdev(dev);
- iounmap(priv(dev)->base);
free_netdev(dev);
ecard_release_resources(ec);
}
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 61f574aa3a9..769ba69451f 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -686,7 +686,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
eh->supported = data->supported;
eh->ctrl = 0;
eh->id = ec->cid.product;
- eh->memc = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), PAGE_SIZE);
+ eh->memc = ecardm_iomap(ec, ECARD_RES_MEMC, 0, PAGE_SIZE);
if (!eh->memc) {
ret = -ENOMEM;
goto free;
@@ -694,7 +694,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
eh->ctrl_port = eh->memc;
if (data->ctrl_ioc) {
- eh->ioc_fast = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST), PAGE_SIZE);
+ eh->ioc_fast = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, PAGE_SIZE);
if (!eh->ioc_fast) {
ret = -ENOMEM;
goto free;
@@ -710,8 +710,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
* IRQ and control port handling - only for non-NIC slot cards.
*/
if (ec->slot_no != 8) {
- ec->ops = &etherh_ops;
- ec->irq_data = eh;
+ ecard_setirq(ec, &etherh_ops, eh);
} else {
/*
* If we're in the NIC slot, make sure the IRQ is enabled
@@ -759,10 +758,6 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
return 0;
free:
- if (eh->ioc_fast)
- iounmap(eh->ioc_fast);
- if (eh->memc)
- iounmap(eh->memc);
free_netdev(dev);
release:
ecard_release_resources(ec);
@@ -773,16 +768,10 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
static void __devexit etherh_remove(struct expansion_card *ec)
{
struct net_device *dev = ecard_get_drvdata(ec);
- struct etherh_priv *eh = etherh_priv(dev);
ecard_set_drvdata(ec, NULL);
unregister_netdev(dev);
- ec->ops = NULL;
-
- if (eh->ioc_fast)
- iounmap(eh->ioc_fast);
- iounmap(eh->memc);
free_netdev(dev);
diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c
index 7e132c5bacf..2836fe248df 100644
--- a/drivers/scsi/arm/arxescsi.c
+++ b/drivers/scsi/arm/arxescsi.c
@@ -281,7 +281,6 @@ arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
struct arxescsi_info *info;
- unsigned long resbase, reslen;
void __iomem *base;
int ret;
@@ -289,9 +288,7 @@ arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
if (ret)
goto out;
- resbase = ecard_resource_start(ec, ECARD_RES_MEMC);
- reslen = ecard_resource_len(ec, ECARD_RES_MEMC);
- base = ioremap(resbase, reslen);
+ base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
if (!base) {
ret = -ENOMEM;
goto out_region;
@@ -300,7 +297,7 @@ arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
host = scsi_host_alloc(&arxescsi_template, sizeof(struct arxescsi_info));
if (!host) {
ret = -ENOMEM;
- goto out_unmap;
+ goto out_region;
}
info = (struct arxescsi_info *)host->hostdata;
@@ -337,8 +334,6 @@ arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
fas216_release(host);
out_unregister:
scsi_host_put(host);
- out_unmap:
- iounmap(base);
out_region:
ecard_release_resources(ec);
out:
@@ -348,13 +343,10 @@ arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
static void __devexit arxescsi_remove(struct expansion_card *ec)
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
- struct arxescsi_info *info = (struct arxescsi_info *)host->hostdata;
ecard_set_drvdata(ec, NULL);
fas216_remove(host);
- iounmap(info->base);
-
fas216_release(host);
scsi_host_put(host);
ecard_release_resources(ec);
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index 82add77ad13..68a64123af8 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -401,7 +401,6 @@ cumanascsi2_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
struct cumanascsi2_info *info;
- unsigned long resbase, reslen;
void __iomem *base;
int ret;
@@ -409,9 +408,7 @@ cumanascsi2_probe(struct expansion_card *ec, const struct ecard_id *id)
if (ret)
goto out;
- resbase = ecard_resource_start(ec, ECARD_RES_MEMC);
- reslen = ecard_resource_len(ec, ECARD_RES_MEMC);
- base = ioremap(resbase, reslen);
+ base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
if (!base) {
ret = -ENOMEM;
goto out_region;
@@ -421,7 +418,7 @@ cumanascsi2_probe(struct expansion_card *ec, const struct ecard_id *id)
sizeof(struct cumanascsi2_info));
if (!host) {
ret = -ENOMEM;
- goto out_unmap;
+ goto out_region;
}
ecard_set_drvdata(ec, host);
@@ -450,8 +447,8 @@ cumanascsi2_probe(struct expansion_card *ec, const struct ecard_id *id)
ec->irqaddr = info->base + CUMANASCSI2_STATUS;
ec->irqmask = STATUS_INT;
- ec->irq_data = info;
- ec->ops = &cumanascsi_2_ops;
+
+ ecard_setirq(ec, &cumanascsi_2_ops, info);
ret = fas216_init(host);
if (ret)
@@ -490,9 +487,6 @@ cumanascsi2_probe(struct expansion_card *ec, const struct ecard_id *id)
out_free:
scsi_host_put(host);
- out_unmap:
- iounmap(base);
-
out_region:
ecard_release_resources(ec);
@@ -512,8 +506,6 @@ static void __devexit cumanascsi2_remove(struct expansion_card *ec)
free_dma(info->info.scsi.dma);
free_irq(ec->irq, info);
- iounmap(info->base);
-
fas216_release(host);
scsi_host_put(host);
ecard_release_resources(ec);
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index ed06a8c19ad..bb2477b3fb0 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -519,7 +519,6 @@ eesoxscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
struct eesoxscsi_info *info;
- unsigned long resbase, reslen;
void __iomem *base;
int ret;
@@ -527,9 +526,7 @@ eesoxscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
if (ret)
goto out;
- resbase = ecard_resource_start(ec, ECARD_RES_IOCFAST);
- reslen = ecard_resource_len(ec, ECARD_RES_IOCFAST);
- base = ioremap(resbase, reslen);
+ base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (!base) {
ret = -ENOMEM;
goto out_region;
@@ -539,7 +536,7 @@ eesoxscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
sizeof(struct eesoxscsi_info));
if (!host) {
ret = -ENOMEM;
- goto out_unmap;
+ goto out_region;
}
ecard_set_drvdata(ec, host);
@@ -569,8 +566,8 @@ eesoxscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
ec->irqaddr = base + EESOX_DMASTAT;
ec->irqmask = EESOX_STAT_INTR;
- ec->irq_data = info;
- ec->ops = &eesoxscsi_ops;
+
+ ecard_setirq(ec, &eesoxscsi_ops, info);
device_create_file(&ec->dev, &dev_attr_bus_term);
@@ -612,9 +609,6 @@ eesoxscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
device_remove_file(&ec->dev, &dev_attr_bus_term);
scsi_host_put(host);
- out_unmap:
- iounmap(base);
-
out_region:
ecard_release_resources(ec);
@@ -636,8 +630,6 @@ static void __devexit eesoxscsi_remove(struct expansion_card *ec)
device_remove_file(&ec->dev, &dev_attr_bus_term);
- iounmap(info->base);
-
fas216_release(host);
scsi_host_put(host);
ecard_release_resources(ec);
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index 159047a3499..d9a546d1917 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -313,7 +313,6 @@ powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
struct powertec_info *info;
- unsigned long resbase, reslen;
void __iomem *base;
int ret;
@@ -321,9 +320,7 @@ powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
if (ret)
goto out;
- resbase = ecard_resource_start(ec, ECARD_RES_IOCFAST);
- reslen = ecard_resource_len(ec, ECARD_RES_IOCFAST);
- base = ioremap(resbase, reslen);
+ base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (!base) {
ret = -ENOMEM;
goto out_region;
@@ -333,7 +330,7 @@ powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
sizeof (struct powertec_info));
if (!host) {
ret = -ENOMEM;
- goto out_unmap;
+ goto out_region;
}
ecard_set_drvdata(ec, host);
@@ -361,8 +358,8 @@ powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
ec->irqaddr = base + POWERTEC_INTR_STATUS;
ec->irqmask = POWERTEC_INTR_BIT;
- ec->irq_data = info;
- ec->ops = &powertecscsi_ops;
+
+ ecard_setirq(ec, &powertecscsi_ops, info);
device_create_file(&ec->dev, &dev_attr_bus_term);
@@ -404,9 +401,6 @@ powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
device_remove_file(&ec->dev, &dev_attr_bus_term);
scsi_host_put(host);
- out_unmap:
- iounmap(base);
-
out_region:
ecard_release_resources(ec);
@@ -428,8 +422,6 @@ static void __devexit powertecscsi_remove(struct expansion_card *ec)
free_dma(info->info.scsi.dma);
free_irq(ec->irq, info);
- iounmap(info->base);
-
fas216_release(host);
scsi_host_put(host);
ecard_release_resources(ec);
diff --git a/drivers/serial/8250_acorn.c b/drivers/serial/8250_acorn.c
index 562ba745a04..b0ce8c56f1a 100644
--- a/drivers/serial/8250_acorn.c
+++ b/drivers/serial/8250_acorn.c
@@ -54,7 +54,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
info->num_ports = type->num_ports;
bus_addr = ecard_resource_start(ec, type->type);
- info->vaddr = ioremap(bus_addr, ecard_resource_len(ec, type->type));
+ info->vaddr = ecardm_iomap(ec, type->type, 0, 0);
if (!info->vaddr) {
kfree(info);
return -ENOMEM;
@@ -91,7 +91,6 @@ static void __devexit serial_card_remove(struct expansion_card *ec)
if (info->ports[i] > 0)
serial8250_unregister_port(info->ports[i]);
- iounmap(info->vaddr);
kfree(info);
}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index a6f5bfbb777..315ea991645 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -359,6 +359,23 @@ config SERIAL_ATMEL_TTYAT
Say Y if you have an external 8250/16C550 UART. If unsure, say N.
+config SERIAL_KS8695
+ bool "Micrel KS8695 (Centaur) serial port support"
+ depends on ARCH_KS8695
+ select SERIAL_CORE
+ help
+ This selects the Micrel Centaur KS8695 UART. Say Y here.
+
+config SERIAL_KS8695_CONSOLE
+ bool "Support for console on KS8695 (Centaur) serial port"
+ depends on SERIAL_KS8695=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use a KS8695 (Centaur) UART as the
+ system console (the system console is the device which
+ receives all kernel messages and warnings and which allows
+ logins in single user mode).
+
config SERIAL_CLPS711X
tristate "CLPS711X serial port support"
depends on ARM && ARCH_CLPS711X
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 4959bcb8d1e..08ad0d97818 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -61,3 +61,4 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
+obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
new file mode 100644
index 00000000000..c5346d67731
--- /dev/null
+++ b/drivers/serial/serial_ks8695.c
@@ -0,0 +1,657 @@
+/*
+ * drivers/serial/serial_ks8695.c
+ *
+ * Driver for KS8695 serial ports
+ *
+ * Based on drivers/serial/serial_amba.c, by Kam Lee.
+ *
+ * Copyright 2002-2005 Micrel Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-uart.h>
+#include <asm/arch/regs-irq.h>
+
+#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+
+#define SERIAL_KS8695_MAJOR 204
+#define SERIAL_KS8695_MINOR 16
+#define SERIAL_KS8695_DEVNAME "ttyAM"
+
+#define SERIAL_KS8695_NR 1
+
+/*
+ * Access macros for the KS8695 UART
+ */
+#define UART_GET_CHAR(p) (__raw_readl((p)->membase + KS8695_URRB) & 0xFF)
+#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + KS8695_URTH)
+#define UART_GET_FCR(p) __raw_readl((p)->membase + KS8695_URFC)
+#define UART_PUT_FCR(p, c) __raw_writel((c), (p)->membase + KS8695_URFC)
+#define UART_GET_MSR(p) __raw_readl((p)->membase + KS8695_URMS)
+#define UART_GET_LSR(p) __raw_readl((p)->membase + KS8695_URLS)
+#define UART_GET_LCR(p) __raw_readl((p)->membase + KS8695_URLC)
+#define UART_PUT_LCR(p, c) __raw_writel((c), (p)->membase + KS8695_URLC)
+#define UART_GET_MCR(p) __raw_readl((p)->membase + KS8695_URMC)
+#define UART_PUT_MCR(p, c) __raw_writel((c), (p)->membase + KS8695_URMC)
+#define UART_GET_BRDR(p) __raw_readl((p)->membase + KS8695_URBD)
+#define UART_PUT_BRDR(p, c) __raw_writel((c), (p)->membase + KS8695_URBD)
+
+#define KS8695_CLR_TX_INT() __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST)
+
+#define UART_DUMMY_LSR_RX 0x100
+#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4)
+
+#define tx_enabled(port) ((port)->unused[0])
+#define rx_enabled(port) ((port)->unused[1])
+
+
+#ifdef SUPPORT_SYSRQ
+static struct console ks8695_console;
+#endif
+
+static void ks8695uart_stop_tx(struct uart_port *port)
+{
+ if (tx_enabled(port)) {
+ disable_irq(KS8695_IRQ_UART_TX);
+ tx_enabled(port) = 0;
+ }
+}
+
+static void ks8695uart_start_tx(struct uart_port *port)
+{
+ if (!tx_enabled(port)) {
+ enable_irq(KS8695_IRQ_UART_TX);
+ tx_enabled(port) = 1;
+ }
+}
+
+static void ks8695uart_stop_rx(struct uart_port *port)
+{
+ if (rx_enabled(port)) {
+ disable_irq(KS8695_IRQ_UART_RX);
+ rx_enabled(port) = 0;
+ }
+}
+
+static void ks8695uart_enable_ms(struct uart_port *port)
+{
+ enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+}
+
+static void ks8695uart_disable_ms(struct uart_port *port)
+{
+ disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+}
+
+static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, lsr, flg, max_count = 256;
+
+ status = UART_GET_LSR(port); /* clears pending LSR interrupts */
+ while ((status & URLS_URDR) && max_count--) {
+ ch = UART_GET_CHAR(port);
+ flg = TTY_NORMAL;
+
+ port->icount.rx++;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ lsr = UART_GET_LSR(port) | UART_DUMMY_LSR_RX;
+ if (unlikely(lsr & (URLS_URBI | URLS_URPE | URLS_URFE | URLS_URROE))) {
+ if (lsr & URLS_URBI) {
+ lsr &= ~(URLS_URFE | URLS_URPE);
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ goto ignore_char;
+ }
+ if (lsr & URLS_URPE)
+ port->icount.parity++;
+ if (lsr & URLS_URFE)
+ port->icount.frame++;
+ if (lsr & URLS_URROE)
+ port->icount.overrun++;
+
+ lsr &= port->read_status_mask;
+
+ if (lsr & URLS_URBI)
+ flg = TTY_BREAK;
+ else if (lsr & URLS_URPE)
+ flg = TTY_PARITY;
+ else if (lsr & URLS_URFE)
+ flg = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, ch))
+ goto ignore_char;
+
+ uart_insert_char(port, lsr, URLS_URROE, ch, flg);
+
+ignore_char:
+ status = UART_GET_LSR(port);
+ }
+ tty_flip_buffer_push(tty);
+
+ return IRQ_HANDLED;
+}
+
+
+static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct circ_buf *xmit = &port->info->xmit;
+ unsigned int count;
+
+ if (port->x_char) {
+ KS8695_CLR_TX_INT();
+ UART_PUT_CHAR(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return IRQ_HANDLED;
+ }
+
+ if (uart_tx_stopped(port) || uart_circ_empty(xmit)) {
+ ks8695uart_stop_tx(port);
+ return IRQ_HANDLED;
+ }
+
+ count = 16; /* fifo size */
+ while (!uart_circ_empty(xmit) && (count-- > 0)) {
+ KS8695_CLR_TX_INT();
+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ ks8695uart_stop_tx(port);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ unsigned int status;
+
+ /*
+ * clear modem interrupt by reading MSR
+ */
+ status = UART_GET_MSR(port);
+
+ if (status & URMS_URDDCD)
+ uart_handle_dcd_change(port, status & URMS_URDDCD);
+
+ if (status & URMS_URDDST)
+ port->icount.dsr++;
+
+ if (status & URMS_URDCTS)
+ uart_handle_cts_change(port, status & URMS_URDCTS);
+
+ if (status & URMS_URTERI)
+ port->icount.rng++;
+
+ wake_up_interruptible(&port->info->delta_msr_wait);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int ks8695uart_tx_empty(struct uart_port *port)
+{
+ return (UART_GET_LSR(port) & URLS_URTE) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int ks8695uart_get_mctrl(struct uart_port *port)
+{
+ unsigned int result = 0;
+ unsigned int status;
+
+ status = UART_GET_MSR(port);
+ if (status & URMS_URDCD)
+ result |= TIOCM_CAR;
+ if (status & URMS_URDSR)
+ result |= TIOCM_DSR;
+ if (status & URMS_URCTS)
+ result |= TIOCM_CTS;
+ if (status & URMS_URRI)
+ result |= TIOCM_RI;
+
+ return result;
+}
+
+static void ks8695uart_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+ unsigned int mcr;
+
+ mcr = UART_GET_MCR(port);
+ if (mctrl & TIOCM_RTS)
+ mcr |= URMC_URRTS;
+ else
+ mcr &= ~URMC_URRTS;
+
+ if (mctrl & TIOCM_DTR)
+ mcr |= URMC_URDTR;
+ else
+ mcr &= ~URMC_URDTR;
+
+ UART_PUT_MCR(port, mcr);
+}
+
+static void ks8695uart_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned int lcr;
+
+ lcr = UART_GET_LCR(port);
+
+ if (break_state == -1)
+ lcr |= URLC_URSBC;
+ else
+ lcr &= ~URLC_URSBC;
+
+ UART_PUT_LCR(port, lcr);
+}
+
+static int ks8695uart_startup(struct uart_port *port)
+{
+ int retval;
+
+ set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN);
+ tx_enabled(port) = 0;
+ rx_enabled(port) = 1;
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, IRQF_DISABLED, "UART TX", port);
+ if (retval)
+ goto err_tx;
+
+ retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, IRQF_DISABLED, "UART RX", port);
+ if (retval)
+ goto err_rx;
+
+ retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, IRQF_DISABLED, "UART LineStatus", port);
+ if (retval)
+ return err_ls;
+
+ retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, IRQF_DISABLED, "UART ModemStatus", port);
+ if (retval)
+ return err_ms;
+
+ return 0;
+
+err_ms:
+ free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
+err_ls:
+ free_irq(KS8695_IRQ_UART_RX, port);
+err_rx:
+ free_irq(KS8695_IRQ_UART_TX, port);
+err_tx:
+ return retval;
+}
+
+static void ks8695uart_shutdown(struct uart_port *port)
+{
+ /*
+ * Free the interrupt
+ */
+ free_irq(KS8695_IRQ_UART_RX, port);
+ free_irq(KS8695_IRQ_UART_TX, port);
+ free_irq(KS8695_IRQ_UART_MODEM_STATUS, port);
+ free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
+
+ /* disable break condition and fifos */
+ UART_PUT_LCR(port, UART_GET_LCR(port) & ~URLC_URSBC);
+ UART_PUT_FCR(port, UART_GET_FCR(port) & ~URFC_URFE);
+}
+
+static void ks8695uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old)
+{
+ unsigned int lcr, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr = URCL_5;
+ break;
+ case CS6:
+ lcr = URCL_6;
+ break;
+ case CS7:
+ lcr = URCL_7;
+ break;
+ default:
+ lcr = URCL_8;
+ break;
+ }
+
+ /* stop bits */
+ if (termios->c_cflag & CSTOPB)
+ lcr |= URLC_URSB;
+
+ /* parity */
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */
+ if (termios->c_cflag & PARODD)
+ lcr |= URPE_MARK;
+ else
+ lcr |= URPE_SPACE;
+ }
+ else if (termios->c_cflag & PARODD)
+ lcr |= URPE_ODD;
+ else
+ lcr |= URPE_EVEN;
+ }
+
+ if (port->fifosize > 1)
+ fcr = URFC_URFRT_8 | URFC_URTFR | URFC_URRFR | URFC_URFE;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = URLS_URROE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= (URLS_URFE | URLS_URPE);
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= URLS_URBI;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= (URLS_URFE | URLS_URPE);
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= URLS_URBI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= URLS_URROE;
+ }
+
+ /*
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_LSR_RX;
+
+ /* first, disable everything */
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ ks8695uart_enable_ms(port);
+ else
+ ks8695uart_disable_ms(port);
+
+ /* Set baud rate */
+ UART_PUT_BRDR(port, quot);
+
+ UART_PUT_LCR(port, lcr);
+ UART_PUT_FCR(port, fcr);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *ks8695uart_type(struct uart_port *port)
+{
+ return port->type == PORT_KS8695 ? "KS8695" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'
+ */
+static void ks8695uart_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, UART_PORT_SIZE);
+}
+
+/*
+ * Request the memory region(s) being used by 'port'
+ */
+static int ks8695uart_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->mapbase, UART_PORT_SIZE,
+ "serial_ks8695") != NULL ? 0 : -EBUSY;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void ks8695uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_KS8695;
+ ks8695uart_request_port(port);
+ }
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int ks8695uart_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_KS8695)
+ ret = -EINVAL;
+ if (ser->irq != port->irq)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops ks8695uart_pops = {
+ .tx_empty = ks8695uart_tx_empty,
+ .set_mctrl = ks8695uart_set_mctrl,
+ .get_mctrl = ks8695uart_get_mctrl,
+ .stop_tx = ks8695uart_stop_tx,
+ .start_tx = ks8695uart_start_tx,
+ .stop_rx = ks8695uart_stop_rx,
+ .enable_ms = ks8695uart_enable_ms,
+ .break_ctl = ks8695uart_break_ctl,
+ .startup = ks8695uart_startup,
+ .shutdown = ks8695uart_shutdown,
+ .set_termios = ks8695uart_set_termios,
+ .type = ks8695uart_type,
+ .release_port = ks8695uart_release_port,
+ .request_port = ks8695uart_request_port,
+ .config_port = ks8695uart_config_port,
+ .verify_port = ks8695uart_verify_port,
+};
+
+static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
+ {
+ .membase = (void *) KS8695_UART_VA,
+ .mapbase = KS8695_UART_VA,
+ .iotype = SERIAL_IO_MEM,
+ .irq = KS8695_IRQ_UART_TX,
+ .uartclk = CLOCK_TICK_RATE * 16,
+ .fifosize = 16,
+ .ops = &ks8695uart_pops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ }
+};
+
+#ifdef CONFIG_SERIAL_KS8695_CONSOLE
+static void ks8695_console_putchar(struct uart_port *port, int ch)
+{
+ while (!(UART_GET_LSR(port) & URLS_URTHRE))
+ barrier();
+
+ UART_PUT_CHAR(port, ch);
+}
+
+static void ks8695_console_write(struct console *co, const char *s, u_int count)
+{
+ struct uart_port *port = ks8695uart_ports + co->index;
+
+ uart_console_write(port, s, count, ks8695_console_putchar);
+}
+
+static void __init ks8695_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
+{
+ unsigned int lcr;
+
+ lcr = UART_GET_LCR(port);
+
+ switch (lcr & URLC_PARITY) {
+ case URPE_ODD:
+ *parity = 'o';
+ break;
+ case URPE_EVEN:
+ *parity = 'e';
+ break;
+ default:
+ *parity = 'n';
+ }
+
+ switch (lcr & URLC_URCL) {
+ case URCL_5:
+ *bits = 5;
+ break;
+ case URCL_6:
+ *bits = 6;
+ break;
+ case URCL_7:
+ *bits = 7;
+ break;
+ default:
+ *bits = 8;
+ }
+
+ *baud = port->uartclk / (UART_GET_BRDR(port) & 0x0FFF);
+ *baud /= 16;
+ *baud &= 0xFFFFFFF0;
+}
+
+static int __init ks8695_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ port = uart_get_console(ks8695uart_ports, SERIAL_KS8695_NR, co);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ ks8695_console_get_options(port, &baud, &parity, &bits);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver ks8695_reg;
+
+static struct console ks8695_console = {
+ .name = SERIAL_KS8695_DEVNAME,
+ .write = ks8695_console_write,
+ .device = uart_console_device,
+ .setup = ks8695_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &ks8695_reg,
+};
+
+static int __init ks8695_console_init(void)
+{
+ register_console(&ks8695_console);
+ return 0;
+}
+
+console_initcall(ks8695_console_init);
+
+#define KS8695_CONSOLE &ks8695_console
+#else
+#define KS8695_CONSOLE NULL
+#endif
+
+static struct uart_driver ks8695_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial_ks8695",
+ .dev_name = SERIAL_KS8695_DEVNAME,
+ .major = SERIAL_KS8695_MAJOR,
+ .minor = SERIAL_KS8695_MINOR,
+ .nr = SERIAL_KS8695_NR,
+ .cons = KS8695_CONSOLE,
+};
+
+static int __init ks8695uart_init(void)
+{
+ int i, ret;
+
+ printk(KERN_INFO "Serial: Micrel KS8695 UART driver\n");
+
+ ret = uart_register_driver(&ks8695_reg);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < SERIAL_KS8695_NR; i++)
+ uart_add_one_port(&ks8695_reg, &ks8695uart_ports[0]);
+
+ return 0;
+}
+
+static void __exit ks8695uart_exit(void)
+{
+ int i;
+
+ for (i = 0; i < SERIAL_KS8695_NR; i++)
+ uart_remove_one_port(&ks8695_reg, &ks8695uart_ports[0]);
+ uart_unregister_driver(&ks8695_reg);
+}
+
+module_init(ks8695uart_init);
+module_exit(ks8695uart_exit);
+
+MODULE_DESCRIPTION("KS8695 serial port driver");
+MODULE_AUTHOR("Micrel Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 8065f2b5370..f771a7cae9e 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -210,7 +210,7 @@ config USB_OTG
config USB_GADGET_AT91
boolean "AT91 USB Device Port"
- depends on ARCH_AT91
+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL
select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/include/asm-arm/arch-at91/at91sam9rl.h
new file mode 100644
index 00000000000..8a9708a370c
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9rl.h
@@ -0,0 +1,110 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9260.h
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Common definitions.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_H
+#define AT91SAM9RL_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Controller */
+#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */
+#define AT91SAM9RL_ID_US0 6 /* USART 0 */
+#define AT91SAM9RL_ID_US1 7 /* USART 1 */
+#define AT91SAM9RL_ID_US2 8 /* USART 2 */
+#define AT91SAM9RL_ID_US3 9 /* USART 3 */
+#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */
+#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */
+#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */
+#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */
+#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */
+#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */
+#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */
+#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */
+#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */
+#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */
+#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */
+#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */
+#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
+#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9RL_BASE_TCB0 0xfffa0000
+#define AT91SAM9RL_BASE_TC0 0xfffa0000
+#define AT91SAM9RL_BASE_TC1 0xfffa0040
+#define AT91SAM9RL_BASE_TC2 0xfffa0080
+#define AT91SAM9RL_BASE_MCI 0xfffa4000
+#define AT91SAM9RL_BASE_TWI0 0xfffa8000
+#define AT91SAM9RL_BASE_TWI1 0xfffac000
+#define AT91SAM9RL_BASE_US0 0xfffb0000
+#define AT91SAM9RL_BASE_US1 0xfffb4000
+#define AT91SAM9RL_BASE_US2 0xfffb8000
+#define AT91SAM9RL_BASE_US3 0xfffbc000
+#define AT91SAM9RL_BASE_SSC0 0xfffc0000
+#define AT91SAM9RL_BASE_SSC1 0xfffc4000
+#define AT91SAM9RL_BASE_PWMC 0xfffc8000
+#define AT91SAM9RL_BASE_SPI 0xfffcc000
+#define AT91SAM9RL_BASE_TSC 0xfffd0000
+#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
+#define AT91SAM9RL_BASE_AC97C 0xfffd8000
+#define AT91_BASE_SYS 0xffffc000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
+#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
+
+#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
+
+#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
new file mode 100644
index 00000000000..b15f11b7c08
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
@@ -0,0 +1,96 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9rl_matrix.h
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_MATRIX_H
+#define AT91SAM9RL_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
+
+
+#endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
index 7ef4eebe9f8..ef93c30a9c5 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -26,6 +26,8 @@
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
+#define ARCH_ID_AT91SAM9RL64 0x019b03a0
+
static inline unsigned long at91_cpu_identify(void)
{
return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
@@ -68,6 +70,13 @@ static inline unsigned long at91_arch_identify(void)
#define cpu_is_at91sam9263() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9RL
+#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
+#else
+#define cpu_is_at91sam9rl() (0)
+#endif
+
+
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 28133e0154d..46835e945ae 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -24,6 +24,8 @@
#include <asm/arch/at91sam9261.h>
#elif defined(CONFIG_ARCH_AT91SAM9263)
#include <asm/arch/at91sam9263.h>
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+#include <asm/arch/at91sam9rl.h>
#else
#error "Unsupported AT91 processor"
#endif
@@ -69,22 +71,5 @@
/* Clocks */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
-#ifndef __ASSEMBLY__
-#include <asm/io.h>
-
-static inline unsigned int at91_sys_read(unsigned int reg_offset)
-{
- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
- return __raw_readl(addr + reg_offset);
-}
-
-static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-{
- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
- __raw_writel(value, addr + reg_offset);
-}
-#endif
#endif
diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h
index 401f327ec04..80073fd36b8 100644
--- a/include/asm-arm/arch-at91/io.h
+++ b/include/asm-arm/arch-at91/io.h
@@ -29,4 +29,22 @@
#define __mem_pci(a) (a)
+#ifndef __ASSEMBLY__
+
+static inline unsigned int at91_sys_read(unsigned int reg_offset)
+{
+ void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+ return __raw_readl(addr + reg_offset);
+}
+
+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
+{
+ void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+ __raw_writel(value, addr + reg_offset);
+}
+
+#endif
+
#endif
diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h
index 1ffa3bb9a9c..1127a3b5e92 100644
--- a/include/asm-arm/arch-at91/irqs.h
+++ b/include/asm-arm/arch-at91/irqs.h
@@ -21,6 +21,7 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
+#include <asm/io.h>
#include <asm/arch/at91_aic.h>
#define NR_AIC_IRQS 32
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
index f41636d607a..2df1ee12dfb 100644
--- a/include/asm-arm/arch-at91/timex.h
+++ b/include/asm-arm/arch-at91/timex.h
@@ -37,6 +37,11 @@
#define AT91SAM9_MASTER_CLOCK 99959500
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+
+#define AT91SAM9_MASTER_CLOCK 100000000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#endif
#endif
diff --git a/include/asm-arm/arch-at91/uncompress.h b/include/asm-arm/arch-at91/uncompress.h
index a193d28304b..30ac587b3b4 100644
--- a/include/asm-arm/arch-at91/uncompress.h
+++ b/include/asm-arm/arch-at91/uncompress.h
@@ -21,7 +21,7 @@
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
-#include <asm/hardware.h>
+#include <asm/io.h>
#include <asm/arch/at91_dbgu.h>
/*
diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/include/asm-arm/arch-cl7500/entry-macro.S
index 0cfb89b229d..038b761fdad 100644
--- a/include/asm-arm/arch-cl7500/entry-macro.S
+++ b/include/asm-arm/arch-cl7500/entry-macro.S
@@ -1,6 +1,14 @@
#include <asm/hardware.h>
#include <asm/hardware/entry-macro-iomd.S>
+
+ .equ ioc_base_high, IOC_BASE & 0xff000000
+ .equ ioc_base_low, IOC_BASE & 0x00ff0000
+
.macro get_irqnr_preamble, base, tmp
+ mov \base, #ioc_base_high @ point at IOC
+ .if ioc_base_low
+ orr \base, \base, #ioc_base_low
+ .endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
diff --git a/include/asm-arm/arch-davinci/common.h b/include/asm-arm/arch-davinci/common.h
new file mode 100644
index 00000000000..a97dfbb15e5
--- /dev/null
+++ b/include/asm-arm/arch-davinci/common.h
@@ -0,0 +1,19 @@
+/*
+ * Header for code common to all DaVinci machines.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H
+#define __ARCH_ARM_MACH_DAVINCI_COMMON_H
+
+struct sys_timer;
+
+extern struct sys_timer davinci_timer;
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/include/asm-arm/arch-davinci/debug-macro.S b/include/asm-arm/arch-davinci/debug-macro.S
new file mode 100644
index 00000000000..e6c0f0d5d06
--- /dev/null
+++ b/include/asm-arm/arch-davinci/debug-macro.S
@@ -0,0 +1,21 @@
+/*
+ * Debugging macro for DaVinci
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x01000000 @ physical base address
+ movne \rx, #0xfe000000 @ virtual base
+ orr \rx, \rx, #0x00c20000 @ UART 0
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-davinci/dma.h b/include/asm-arm/arch-davinci/dma.h
new file mode 100644
index 00000000000..8e2f2d0ba66
--- /dev/null
+++ b/include/asm-arm/arch-davinci/dma.h
@@ -0,0 +1,16 @@
+/*
+ * DaVinci DMA definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS 0xffffffff
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-davinci/entry-macro.S b/include/asm-arm/arch-davinci/entry-macro.S
new file mode 100644
index 00000000000..3ebfcc5cb58
--- /dev/null
+++ b/include/asm-arm/arch-davinci/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * Low-level IRQ helper macros for TI DaVinci-based platforms
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <asm/arch/io.h>
+#include <asm/arch/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \tmp, [\base, #0x14]
+ mov \tmp, \tmp, lsr #2
+ sub \irqnr, \tmp, #1
+ cmp \tmp, #0
+ .endm
+
+ .macro irq_prio_table
+ .endm
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
new file mode 100644
index 00000000000..60362d80229
--- /dev/null
+++ b/include/asm-arm/arch-davinci/hardware.h
@@ -0,0 +1,14 @@
+/*
+ * Common hardware definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-davinci/io.h b/include/asm-arm/arch-davinci/io.h
new file mode 100644
index 00000000000..e7accb91086
--- /dev/null
+++ b/include/asm-arm/arch-davinci/io.h
@@ -0,0 +1,79 @@
+/*
+ * DaVinci IO address definitions
+ *
+ * Copied from include/asm/arm/arch-omap/io.h
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+#define IO_PHYS 0x01c00000
+#define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */
+#define IO_SIZE 0x00400000
+#define IO_VIRT (IO_PHYS + IO_OFFSET)
+#define io_p2v(pa) ((pa) + IO_OFFSET)
+#define io_v2p(va) ((va) - IO_OFFSET)
+#define IO_ADDRESS(x) io_p2v(x)
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define PCIO_BASE 0
+#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a) (a)
+#define __mem_isa(a) (a)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Functions to access the DaVinci IO region
+ *
+ * NOTE: - Use davinci_read/write[bwl] for physical register addresses
+ * - Use __raw_read/write[bwl]() for virtual register addresses
+ * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
+ * - DO NOT use hardcoded virtual addresses to allow changing the
+ * IO address space again if needed
+ */
+#define davinci_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a))
+#define davinci_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a))
+#define davinci_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a))
+
+#define davinci_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v))
+#define davinci_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
+#define davinci_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v))
+
+/* 16 bit uses LDRH/STRH, base +/- offset_8 */
+typedef struct { volatile u16 offset[256]; } __regbase16;
+#define __REGV16(vaddr) ((__regbase16 *)((vaddr)&~0xff)) \
+ ->offset[((vaddr)&0xff)>>1]
+#define __REG16(paddr) __REGV16(io_p2v(paddr))
+
+/* 8/32 bit uses LDR/STR, base +/- offset_12 */
+typedef struct { volatile u8 offset[4096]; } __regbase8;
+#define __REGV8(vaddr) ((__regbase8 *)((vaddr)&~4095)) \
+ ->offset[((vaddr)&4095)>>0]
+#define __REG8(paddr) __REGV8(io_p2v(paddr))
+
+typedef struct { volatile u32 offset[4096]; } __regbase32;
+#define __REGV32(vaddr) ((__regbase32 *)((vaddr)&~4095)) \
+ ->offset[((vaddr)&4095)>>2]
+
+#define __REG(paddr) __REGV32(io_p2v(paddr))
+#else
+
+#define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
+
+#endif /* __ASSEMBLER__ */
+#endif /* __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-davinci/irqs.h b/include/asm-arm/arch-davinci/irqs.h
new file mode 100644
index 00000000000..f4c5ca6da9f
--- /dev/null
+++ b/include/asm-arm/arch-davinci/irqs.h
@@ -0,0 +1,105 @@
+/*
+ * DaVinci interrupt controller definitions
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/* Base address */
+#define DAVINCI_ARM_INTC_BASE 0x01C48000
+
+/* Interrupt lines */
+#define IRQ_VDINT0 0
+#define IRQ_VDINT1 1
+#define IRQ_VDINT2 2
+#define IRQ_HISTINT 3
+#define IRQ_H3AINT 4
+#define IRQ_PRVUINT 5
+#define IRQ_RSZINT 6
+#define IRQ_VFOCINT 7
+#define IRQ_VENCINT 8
+#define IRQ_ASQINT 9
+#define IRQ_IMXINT 10
+#define IRQ_VLCDINT 11
+#define IRQ_USBINT 12
+#define IRQ_EMACINT 13
+
+#define IRQ_CCINT0 16
+#define IRQ_CCERRINT 17
+#define IRQ_TCERRINT0 18
+#define IRQ_TCERRINT 19
+#define IRQ_PSCIN 20
+
+#define IRQ_IDE 22
+#define IRQ_HPIINT 23
+#define IRQ_MBXINT 24
+#define IRQ_MBRINT 25
+#define IRQ_MMCINT 26
+#define IRQ_SDIOINT 27
+#define IRQ_MSINT 28
+#define IRQ_DDRINT 29
+#define IRQ_AEMIFINT 30
+#define IRQ_VLQINT 31
+#define IRQ_TINT0_TINT12 32
+#define IRQ_TINT0_TINT34 33
+#define IRQ_TINT1_TINT12 34
+#define IRQ_TINT1_TINT34 35
+#define IRQ_PWMINT0 36
+#define IRQ_PWMINT1 37
+#define IRQ_PWMINT2 38
+#define IRQ_I2C 39
+#define IRQ_UARTINT0 40
+#define IRQ_UARTINT1 41
+#define IRQ_UARTINT2 42
+#define IRQ_SPINT0 43
+#define IRQ_SPINT1 44
+
+#define IRQ_DSP2ARM0 46
+#define IRQ_DSP2ARM1 47
+#define IRQ_GPIO0 48
+#define IRQ_GPIO1 49
+#define IRQ_GPIO2 50
+#define IRQ_GPIO3 51
+#define IRQ_GPIO4 52
+#define IRQ_GPIO5 53
+#define IRQ_GPIO6 54
+#define IRQ_GPIO7 55
+#define IRQ_GPIOBNK0 56
+#define IRQ_GPIOBNK1 57
+#define IRQ_GPIOBNK2 58
+#define IRQ_GPIOBNK3 59
+#define IRQ_GPIOBNK4 60
+#define IRQ_COMMTX 61
+#define IRQ_COMMRX 62
+#define IRQ_EMUINT 63
+
+#define DAVINCI_N_AINTC_IRQ 64
+#define DAVINCI_N_GPIO 71
+
+#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
+
+#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-davinci/memory.h b/include/asm-arm/arch-davinci/memory.h
new file mode 100644
index 00000000000..dd1625c23cf
--- /dev/null
+++ b/include/asm-arm/arch-davinci/memory.h
@@ -0,0 +1,64 @@
+/*
+ * DaVinci memory space definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+#include <asm/page.h>
+#include <asm/sizes.h>
+
+/**************************************************************************
+ * Definitions
+ **************************************************************************/
+#define DAVINCI_DDR_BASE 0x80000000
+#define DAVINCI_IRAM_BASE 0x00008000 /* ARM Internal RAM */
+
+#define PHYS_OFFSET DAVINCI_DDR_BASE
+
+/*
+ * Increase size of DMA-consistent memory region
+ */
+#define CONSISTENT_DMA_SIZE (14<<20)
+
+#ifndef __ASSEMBLY__
+/*
+ * Restrict DMA-able region to workaround silicon bug. The bug
+ * restricts buffers available for DMA to video hardware to be
+ * below 128M
+ */
+static inline void
+__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+{
+ unsigned int sz = (128<<20) >> PAGE_SHIFT;
+
+ if (node != 0)
+ sz = 0;
+
+ size[1] = size[0] - sz;
+ size[0] = sz;
+}
+
+#define arch_adjust_zones(node, zone_size, holes) \
+ if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes)
+
+#define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1)
+
+#endif
+
+/*
+ * Bus address is physical address
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/include/asm-arm/arch-davinci/psc.h b/include/asm-arm/arch-davinci/psc.h
new file mode 100644
index 00000000000..4977aa071e1
--- /dev/null
+++ b/include/asm-arm/arch-davinci/psc.h
@@ -0,0 +1,76 @@
+/*
+ * DaVinci Power & Sleep Controller (PSC) defines
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_ARCH_PSC_H
+#define __ASM_ARCH_PSC_H
+
+/* Power and Sleep Controller (PSC) Domains */
+#define DAVINCI_GPSC_ARMDOMAIN 0
+#define DAVINCI_GPSC_DSPDOMAIN 1
+
+#define DAVINCI_LPSC_VPSSMSTR 0
+#define DAVINCI_LPSC_VPSSSLV 1
+#define DAVINCI_LPSC_TPCC 2
+#define DAVINCI_LPSC_TPTC0 3
+#define DAVINCI_LPSC_TPTC1 4
+#define DAVINCI_LPSC_EMAC 5
+#define DAVINCI_LPSC_EMAC_WRAPPER 6
+#define DAVINCI_LPSC_MDIO 7
+#define DAVINCI_LPSC_IEEE1394 8
+#define DAVINCI_LPSC_USB 9
+#define DAVINCI_LPSC_ATA 10
+#define DAVINCI_LPSC_VLYNQ 11
+#define DAVINCI_LPSC_UHPI 12
+#define DAVINCI_LPSC_DDR_EMIF 13
+#define DAVINCI_LPSC_AEMIF 14
+#define DAVINCI_LPSC_MMC_SD 15
+#define DAVINCI_LPSC_MEMSTICK 16
+#define DAVINCI_LPSC_McBSP 17
+#define DAVINCI_LPSC_I2C 18
+#define DAVINCI_LPSC_UART0 19
+#define DAVINCI_LPSC_UART1 20
+#define DAVINCI_LPSC_UART2 21
+#define DAVINCI_LPSC_SPI 22
+#define DAVINCI_LPSC_PWM0 23
+#define DAVINCI_LPSC_PWM1 24
+#define DAVINCI_LPSC_PWM2 25
+#define DAVINCI_LPSC_GPIO 26
+#define DAVINCI_LPSC_TIMER0 27
+#define DAVINCI_LPSC_TIMER1 28
+#define DAVINCI_LPSC_TIMER2 29
+#define DAVINCI_LPSC_SYSTEM_SUBSYS 30
+#define DAVINCI_LPSC_ARM 31
+#define DAVINCI_LPSC_SCR2 32
+#define DAVINCI_LPSC_SCR3 33
+#define DAVINCI_LPSC_SCR4 34
+#define DAVINCI_LPSC_CROSSBAR 35
+#define DAVINCI_LPSC_CFG27 36
+#define DAVINCI_LPSC_CFG3 37
+#define DAVINCI_LPSC_CFG5 38
+#define DAVINCI_LPSC_GEM 39
+#define DAVINCI_LPSC_IMCOP 40
+
+#endif /* __ASM_ARCH_PSC_H */
diff --git a/include/asm-arm/arch-davinci/serial.h b/include/asm-arm/arch-davinci/serial.h
new file mode 100644
index 00000000000..ed418ef7680
--- /dev/null
+++ b/include/asm-arm/arch-davinci/serial.h
@@ -0,0 +1,20 @@
+/*
+ * DaVinci serial device definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <asm/arch/io.h>
+
+#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+
+#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/include/asm-arm/arch-davinci/system.h b/include/asm-arm/arch-davinci/system.h
new file mode 100644
index 00000000000..440ac515804
--- /dev/null
+++ b/include/asm-arm/arch-davinci/system.h
@@ -0,0 +1,29 @@
+/*
+ * DaVinci system defines
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+
+extern void davinci_watchdog_reset(void);
+
+static void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static void arch_reset(char mode)
+{
+ davinci_watchdog_reset();
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-davinci/timex.h b/include/asm-arm/arch-davinci/timex.h
new file mode 100644
index 00000000000..52827567841
--- /dev/null
+++ b/include/asm-arm/arch-davinci/timex.h
@@ -0,0 +1,17 @@
+/*
+ * DaVinci timer defines
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* The source frequency for the timers is the 27MHz clock */
+#define CLOCK_TICK_RATE 27000000
+
+#endif /* __ASM_ARCH_TIMEX_H__ */
diff --git a/include/asm-arm/arch-davinci/uncompress.h b/include/asm-arm/arch-davinci/uncompress.h
new file mode 100644
index 00000000000..f6d1570f720
--- /dev/null
+++ b/include/asm-arm/arch-davinci/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Author: Anant Gole
+ * (C) Copyright (C) 2006, Texas Instruments, Inc
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <asm/arch/serial.h>
+
+/* PORT_16C550A, in polled non-fifo mode */
+
+static void putc(char c)
+{
+ volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+
+ while (!(uart[UART_LSR] & UART_LSR_THRE))
+ barrier();
+ uart[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+ volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+ while (!(uart[UART_LSR] & UART_LSR_THRE))
+ barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-davinci/vmalloc.h b/include/asm-arm/arch-davinci/vmalloc.h
new file mode 100644
index 00000000000..9b47fa89b33
--- /dev/null
+++ b/include/asm-arm/arch-davinci/vmalloc.h
@@ -0,0 +1,15 @@
+/*
+ * DaVinci vmalloc definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <asm/memory.h>
+#include <asm/arch/io.h>
+
+/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
+#define VMALLOC_END (IO_VIRT - (2<<20))
diff --git a/include/asm-arm/arch-ebsa110/entry-macro.S b/include/asm-arm/arch-ebsa110/entry-macro.S
index aa23c5d6c69..f242be5c49b 100644
--- a/include/asm-arm/arch-ebsa110/entry-macro.S
+++ b/include/asm-arm/arch-ebsa110/entry-macro.S
@@ -16,13 +16,13 @@
.endm
.macro get_irqnr_preamble, base, tmp
+ mov \base, #IRQ_STAT
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, stat, base, tmp
- mov \base, #IRQ_STAT
ldrb \stat, [\base] @ get interrupts
mov \irqnr, #0
tst \stat, #15
diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S
index 4203dbf1066..e63064edb73 100644
--- a/include/asm-arm/arch-ebsa285/entry-macro.S
+++ b/include/asm-arm/arch-ebsa285/entry-macro.S
@@ -11,24 +11,24 @@
#include <asm/arch/irqs.h>
#include <asm/hardware/dec21285.h>
+ .equ dc21285_high, ARMCSR_BASE & 0xff000000
+ .equ dc21285_low, ARMCSR_BASE & 0x00ffffff
+
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
+ mov \base, #dc21285_high
+ .if dc21285_low
+ orr \base, \base, #dc21285_low
+ .endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
- .equ dc21285_high, ARMCSR_BASE & 0xff000000
- .equ dc21285_low, ARMCSR_BASE & 0x00ffffff
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov r4, #dc21285_high
- .if dc21285_low
- orr r4, r4, #dc21285_low
- .endif
- ldr \irqstat, [r4, #0x180] @ get interrupts
+ ldr \irqstat, [\base, #0x180] @ get interrupts
mov \irqnr, #IRQ_SDRAMPARITY
tst \irqstat, #IRQ_MASK_SDRAMPARITY
diff --git a/include/asm-arm/arch-iop13xx/io.h b/include/asm-arm/arch-iop13xx/io.h
index 7dfff4ad82b..a6e0f9e6ddc 100644
--- a/include/asm-arm/arch-iop13xx/io.h
+++ b/include/asm-arm/arch-iop13xx/io.h
@@ -27,7 +27,7 @@
extern void __iomem * __iop13xx_io(unsigned long io_addr);
extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size,
- unsigned long flags);
+ unsigned int mtype);
extern void __iop13xx_iounmap(void __iomem *addr);
extern u32 iop13xx_atue_mem_base;
diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h
index 85707e9c332..e6736c3d1f7 100644
--- a/include/asm-arm/arch-iop13xx/iop13xx.h
+++ b/include/asm-arm/arch-iop13xx/iop13xx.h
@@ -181,6 +181,7 @@ static inline int iop13xx_cpu_id(void)
#define IOP13XX_ADMA1_PMMR_OFFSET 0x00000200
#define IOP13XX_ADMA2_PMMR_OFFSET 0x00000400
#define IOP13XX_PBI_PMMR_OFFSET 0x00001580
+#define IOP13XX_MU_PMMR_OFFSET 0x00004000
#define IOP13XX_ESSR0_PMMR_OFFSET 0x00002188
#define IOP13XX_ESSR0 IOP13XX_REG_ADDR32(0x00002188)
@@ -412,6 +413,34 @@ static inline int iop13xx_cpu_id(void)
#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK (0x7)
/*=======================================================================*/
+/*============================MESSAGING UNIT=============================*/
+#define IOP13XX_MU_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_MU_PMMR_OFFSET +\
+ (ofs))
+
+#define IOP13XX_MU_IMR0 IOP13XX_MU_OFFSET(0x10)
+#define IOP13XX_MU_IMR1 IOP13XX_MU_OFFSET(0x14)
+#define IOP13XX_MU_OMR0 IOP13XX_MU_OFFSET(0x18)
+#define IOP13XX_MU_OMR1 IOP13XX_MU_OFFSET(0x1C)
+#define IOP13XX_MU_IDR IOP13XX_MU_OFFSET(0x20)
+#define IOP13XX_MU_IISR IOP13XX_MU_OFFSET(0x24)
+#define IOP13XX_MU_IIMR IOP13XX_MU_OFFSET(0x28)
+#define IOP13XX_MU_ODR IOP13XX_MU_OFFSET(0x2C)
+#define IOP13XX_MU_OISR IOP13XX_MU_OFFSET(0x30)
+#define IOP13XX_MU_OIMR IOP13XX_MU_OFFSET(0x34)
+#define IOP13XX_MU_IRCSR IOP13XX_MU_OFFSET(0x38)
+#define IOP13XX_MU_ORCSR IOP13XX_MU_OFFSET(0x3C)
+#define IOP13XX_MU_MIMR IOP13XX_MU_OFFSET(0x48)
+#define IOP13XX_MU_MUCR IOP13XX_MU_OFFSET(0x50)
+#define IOP13XX_MU_QBAR IOP13XX_MU_OFFSET(0x54)
+#define IOP13XX_MU_MUBAR IOP13XX_MU_OFFSET(0x84)
+
+#define IOP13XX_MU_WINDOW_SIZE (8 * 1024)
+#define IOP13XX_MU_BASE_PHYS (0xff000000)
+#define IOP13XX_MU_BASE_PCI (0xff000000)
+#define IOP13XX_MU_MIMR_PCI (IOP13XX_MU_BASE_PCI + 0x48)
+#define IOP13XX_MU_MIMR_CORE_SELECT (15)
+/*=======================================================================*/
+
/*==============================ADMA UNITS===============================*/
#define IOP13XX_ADMA_PHYS_BASE(chan) IOP13XX_REG_ADDR32_PHYS((chan << 9))
#define IOP13XX_ADMA_UPPER_PA(chan) (IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
diff --git a/include/asm-arm/arch-iop13xx/irqs.h b/include/asm-arm/arch-iop13xx/irqs.h
index 5c6fac2a400..054e7acb5bf 100644
--- a/include/asm-arm/arch-iop13xx/irqs.h
+++ b/include/asm-arm/arch-iop13xx/irqs.h
@@ -168,7 +168,7 @@ static inline u32 read_intpnd_3(void)
#define IRQ_IOP13XX_ATUE_IMD (110) /* 14 */
#define IRQ_IOP13XX_MU_MSI_TB (111) /* 15 */
#define IRQ_IOP13XX_RSVD_112 (112) /* 16 */
-#define IRQ_IOP13XX_RSVD_113 (113) /* 17 */
+#define IRQ_IOP13XX_INBD_MSI (113) /* 17 */
#define IRQ_IOP13XX_RSVD_114 (114) /* 18 */
#define IRQ_IOP13XX_RSVD_115 (115) /* 19 */
#define IRQ_IOP13XX_RSVD_116 (116) /* 20 */
@@ -184,7 +184,13 @@ static inline u32 read_intpnd_3(void)
#define IRQ_IOP13XX_RSVD_126 (126) /* 30 */
#define IRQ_IOP13XX_HPI (127) /* 31 */
+#ifdef CONFIG_PCI_MSI
+#define IRQ_IOP13XX_MSI_0 (IRQ_IOP13XX_HPI + 1)
+#define NR_IOP13XX_IRQS (IRQ_IOP13XX_MSI_0 + 128)
+#else
#define NR_IOP13XX_IRQS (IRQ_IOP13XX_HPI + 1)
+#endif
+
#define NR_IRQS NR_IOP13XX_IRQS
#endif /* _IOP13XX_IRQ_H_ */
diff --git a/include/asm-arm/arch-iop13xx/msi.h b/include/asm-arm/arch-iop13xx/msi.h
new file mode 100644
index 00000000000..b80c5ae17e9
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/msi.h
@@ -0,0 +1,11 @@
+#ifndef _IOP13XX_MSI_H_
+#define _IOP13XX_MSI_H_
+#ifdef CONFIG_PCI_MSI
+void iop13xx_msi_init(void);
+#else
+static inline void iop13xx_msi_init(void)
+{
+ return;
+}
+#endif
+#endif
diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h
index 994f16af505..958af751a48 100644
--- a/include/asm-arm/arch-iop32x/io.h
+++ b/include/asm-arm/arch-iop32x/io.h
@@ -14,7 +14,7 @@
#include <asm/hardware.h>
extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
- unsigned long flags);
+ unsigned int mtype);
extern void __iop3xx_iounmap(void __iomem *addr);
#define IO_SPACE_LIMIT 0xffffffff
diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h
index 993f7589b29..fec9c53e2b1 100644
--- a/include/asm-arm/arch-iop33x/io.h
+++ b/include/asm-arm/arch-iop33x/io.h
@@ -14,7 +14,7 @@
#include <asm/hardware.h>
extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
- unsigned long flags);
+ unsigned int mtype);
extern void __iop3xx_iounmap(void __iomem *addr);
#define IO_SPACE_LIMIT 0xffffffff
diff --git a/include/asm-arm/arch-ks8695/debug-macro.S b/include/asm-arm/arch-ks8695/debug-macro.S
new file mode 100644
index 00000000000..cd5f2fb1f06
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/debug-macro.S
@@ -0,0 +1,38 @@
+/*
+ * include/asm-arm/arch-ks8695/debug-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Debug macros
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/hardware.h>
+#include <asm/arch/regs-uart.h>
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =KS8695_UART_PA @ physical base address
+ ldrne \rx, =KS8695_UART_VA @ virtual base address
+ .endm
+
+ .macro senduart, rd, rx
+ str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register
+ .endm
+
+ .macro busyuart, rd, rx
+1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
+ tst \rd, #URLS_URTE @ Holding & Shift registers empty?
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
+ tst \rd, #URLS_URTHRE @ Holding Register empty?
+ beq 1001b
+ .endm
diff --git a/include/asm-arm/arch-ks8695/devices.h b/include/asm-arm/arch-ks8695/devices.h
new file mode 100644
index 00000000000..b0364dce463
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/devices.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-arm/arch-ks8695/devices.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DEVICES_H
+#define __ASM_ARCH_DEVICES_H
+
+#include <linux/pci.h>
+
+ /* Ethernet */
+extern void __init ks8695_add_device_wan(void);
+extern void __init ks8695_add_device_lan(void);
+extern void __init ks8695_add_device_hpna(void);
+
+ /* PCI */
+#define KS8695_MODE_PCI 0
+#define KS8695_MODE_MINIPCI 1
+#define KS8695_MODE_CARDBUS 2
+
+struct ks8695_pci_cfg {
+ short mode;
+ int (*map_irq)(struct pci_dev *, u8, u8);
+};
+extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/dma.h b/include/asm-arm/arch-ks8695/dma.h
new file mode 100644
index 00000000000..e5159ed42a4
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/dma.h
@@ -0,0 +1,17 @@
+/*
+ * include/asm-arm/arch-ks8695/dma.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
diff --git a/include/asm-arm/arch-ks8695/entry-macro.S b/include/asm-arm/arch-ks8695/entry-macro.S
new file mode 100644
index 00000000000..e34bdf85920
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/entry-macro.S
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-ks8695/entry-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * Low-level IRQ helper macros for KS8695
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware.h>
+#include <asm/arch/regs-irq.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register
+
+ teq \irqstat, #0
+ beq 1001f
+
+ mov \irqnr, #0
+
+ tst \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tsteq \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tsteq \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tst \irqstat, #0x0f
+ moveq \irqstat, \irqstat, lsr #4
+ addeq \irqnr, \irqnr, #4
+ tst \irqstat, #0x03
+ moveq \irqstat, \irqstat, lsr #2
+ addeq \irqnr, \irqnr, #2
+ tst \irqstat, #0x01
+ addeqs \irqnr, \irqnr, #1
+1001:
+ .endm
diff --git a/include/asm-arm/arch-ks8695/hardware.h b/include/asm-arm/arch-ks8695/hardware.h
new file mode 100644
index 00000000000..cb732bff328
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/hardware.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-ks8695/hardware.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Memory Map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical RAM address.
+ */
+#define KS8695_SDRAM_PA 0x00000000
+
+
+/*
+ * We map an entire MiB with the System Configuration Registers in even
+ * though only 64KiB is needed. This makes it easier for use with the
+ * head debug code as the initial MMU setup only deals in L1 sections.
+ */
+#define KS8695_IO_PA 0x03F00000
+#define KS8695_IO_VA 0xF0000000
+#define KS8695_IO_SIZE SZ_1M
+
+#define KS8695_PCIMEM_PA 0x60000000
+#define KS8695_PCIMEM_SIZE SZ_512M
+
+#define KS8695_PCIIO_PA 0x80000000
+#define KS8695_PCIIO_SIZE SZ_64K
+
+
+/*
+ * PCI support
+ */
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0
+#define PCIBIOS_MIN_MEM 0
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/io.h b/include/asm-arm/arch-ks8695/io.h
new file mode 100644
index 00000000000..8edc4bd6aad
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/io.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-arm/arch-ks8695/io.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/irqs.h b/include/asm-arm/arch-ks8695/irqs.h
new file mode 100644
index 00000000000..8b1c4fe96a8
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/irqs.h
@@ -0,0 +1,54 @@
+/*
+ * linux/include/asm-arm/arch-ks8695/irqs.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define NR_IRQS 32
+
+/*
+ * IRQ definitions
+ */
+#define KS8695_IRQ_COMM_RX 0
+#define KS8695_IRQ_COMM_TX 1
+#define KS8695_IRQ_EXTERN0 2
+#define KS8695_IRQ_EXTERN1 3
+#define KS8695_IRQ_EXTERN2 4
+#define KS8695_IRQ_EXTERN3 5
+#define KS8695_IRQ_TIMER0 6
+#define KS8695_IRQ_TIMER1 7
+#define KS8695_IRQ_UART_TX 8
+#define KS8695_IRQ_UART_RX 9
+#define KS8695_IRQ_UART_LINE_STATUS 10
+#define KS8695_IRQ_UART_MODEM_STATUS 11
+#define KS8695_IRQ_LAN_RX_STOP 12
+#define KS8695_IRQ_LAN_TX_STOP 13
+#define KS8695_IRQ_LAN_RX_BUF 14
+#define KS8695_IRQ_LAN_TX_BUF 15
+#define KS8695_IRQ_LAN_RX_STATUS 16
+#define KS8695_IRQ_LAN_TX_STATUS 17
+#define KS8695_IRQ_HPNA_RX_STOP 18
+#define KS8695_IRQ_HPNA_TX_STOP 19
+#define KS8695_IRQ_HPNA_RX_BUF 20
+#define KS8695_IRQ_HPNA_TX_BUF 21
+#define KS8695_IRQ_HPNA_RX_STATUS 22
+#define KS8695_IRQ_HPNA_TX_STATUS 23
+#define KS8695_IRQ_BUS_ERROR 24
+#define KS8695_IRQ_WAN_RX_STOP 25
+#define KS8695_IRQ_WAN_TX_STOP 26
+#define KS8695_IRQ_WAN_RX_BUF 27
+#define KS8695_IRQ_WAN_TX_BUF 28
+#define KS8695_IRQ_WAN_RX_STATUS 29
+#define KS8695_IRQ_WAN_TX_STATUS 30
+#define KS8695_IRQ_WAN_LINK 31
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/memory.h b/include/asm-arm/arch-ks8695/memory.h
new file mode 100644
index 00000000000..24f6a6e4a30
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/memory.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-ks8695/memory.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 Memory definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/hardware.h>
+
+/*
+ * Physical SRAM offset.
+ */
+#define PHYS_OFFSET KS8695_SDRAM_PA
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PCI
+
+/* PCI mappings */
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
+#define __bus_to_virt(x) ((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
+
+/* Platform-bus mapping */
+extern struct bus_type platform_bus_type;
+#define is_lbus_device(dev) (dev && dev->bus == &platform_bus_type)
+#define __arch_dma_to_virt(dev, x) ({ is_lbus_device(dev) ? \
+ __phys_to_virt(x) : __bus_to_virt(x); })
+#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \
+ (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
+#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x))
+
+#else
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/include/asm-arm/arch-ks8695/regs-gpio.h
new file mode 100644
index 00000000000..57fcf9fc82e
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-gpio.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-gpio.h
+ *
+ * Copyright (C) 2007 Andrew Victor
+ *
+ * KS8695 - GPIO control registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_GPIO_H
+#define KS8695_GPIO_H
+
+#define KS8695_GPIO_OFFSET (0xF0000 + 0xE600)
+#define KS8695_GPIO_VA (KS8695_IO_VA + KS8695_GPIO_OFFSET)
+#define KS8695_GPIO_PA (KS8695_IO_PA + KS8695_GPIO_OFFSET)
+
+
+#define KS8695_IOPM (0x00) /* I/O Port Mode Register */
+#define KS8695_IOPC (0x04) /* I/O Port Control Register */
+#define KS8695_IOPD (0x08) /* I/O Port Data Register */
+
+
+/* Port Mode Register */
+#define IOPM_(x) (1 << (x)) /* Mode for GPIO Pin x */
+
+/* Port Control Register */
+#define IOPC_IOTIM1EN (1 << 17) /* GPIO Pin for Timer1 Enable */
+#define IOPC_IOTIM0EN (1 << 16) /* GPIO Pin for Timer0 Enable */
+#define IOPC_IOEINT3EN (1 << 15) /* GPIO Pin for External/Soft Interrupt 3 Enable */
+#define IOPC_IOEINT3TM (7 << 12) /* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
+#define IOPC_IOEINT3_MODE(x) ((x) << 12)
+#define IOPC_IOEINT2EN (1 << 11) /* GPIO Pin for External/Soft Interrupt 2 Enable */
+#define IOPC_IOEINT2TM (7 << 8) /* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
+#define IOPC_IOEINT2_MODE(x) ((x) << 8)
+#define IOPC_IOEINT1EN (1 << 7) /* GPIO Pin for External/Soft Interrupt 1 Enable */
+#define IOPC_IOEINT1TM (7 << 4) /* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
+#define IOPC_IOEINT1_MODE(x) ((x) << 4)
+#define IOPC_IOEINT0EN (1 << 3) /* GPIO Pin for External/Soft Interrupt 0 Enable */
+#define IOPC_IOEINT0TM (7 << 0) /* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
+#define IOPC_IOEINT0_MODE(x) ((x) << 0)
+
+ /* Trigger Modes */
+#define IOPC_TM_LOW (0) /* Level Detection (Active Low) */
+#define IOPC_TM_HIGH (1) /* Level Detection (Active High) */
+#define IOPC_TM_RISING (2) /* Rising Edge Detection */
+#define IOPC_TM_FALLING (4) /* Falling Edge Detection */
+#define IOPC_TM_EDGE (6) /* Both Edge Detection */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-hpna.h b/include/asm-arm/arch-ks8695/regs-hpna.h
new file mode 100644
index 00000000000..14091cdec10
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-hpna.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - HPNA Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_HPNA_H
+#define KS8695_HPNA_H
+
+#define KS8695_HPNA_OFFSET (0xF0000 + 0xA000)
+#define KS8695_HPNA_VA (KS8695_IO_VA + KS8695_HPNA_OFFSET)
+#define KS8695_HPNA_PA (KS8695_IO_PA + KS8695_HPNA_OFFSET)
+
+
+/*
+ * HPNA registers
+ */
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-irq.h b/include/asm-arm/arch-ks8695/regs-irq.h
new file mode 100644
index 00000000000..70b193f6b75
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-irq.h
@@ -0,0 +1,41 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-irq.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - IRQ registers and bit definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_IRQ_H
+#define KS8695_IRQ_H
+
+#define KS8695_IRQ_OFFSET (0xF0000 + 0xE200)
+#define KS8695_IRQ_VA (KS8695_IO_VA + KS8695_IRQ_OFFSET)
+#define KS8695_IRQ_PA (KS8695_IO_PA + KS8695_IRQ_OFFSET)
+
+
+/*
+ * Interrupt Controller registers
+ */
+#define KS8695_INTMC (0x00) /* Mode Control Register */
+#define KS8695_INTEN (0x04) /* Interrupt Enable Register */
+#define KS8695_INTST (0x08) /* Interrupt Status Register */
+#define KS8695_INTPW (0x0c) /* Interrupt Priority (WAN MAC) */
+#define KS8695_INTPH (0x10) /* Interrupt Priority (HPNA) [KS8695 only] */
+#define KS8695_INTPL (0x14) /* Interrupt Priority (LAN MAC) */
+#define KS8695_INTPT (0x18) /* Interrupt Priority (Timer) */
+#define KS8695_INTPU (0x1c) /* Interrupt Priority (UART) */
+#define KS8695_INTPE (0x20) /* Interrupt Priority (External Interrupt) */
+#define KS8695_INTPC (0x24) /* Interrupt Priority (Communications Channel) */
+#define KS8695_INTPBE (0x28) /* Interrupt Priority (Bus Error Response) */
+#define KS8695_INTMS (0x2c) /* Interrupt Mask Status Register */
+#define KS8695_INTHPF (0x30) /* Interrupt Pending Highest Priority (FIQ) */
+#define KS8695_INTHPI (0x34) /* Interrupt Pending Highest Priority (IRQ) */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-lan.h b/include/asm-arm/arch-ks8695/regs-lan.h
new file mode 100644
index 00000000000..a63bd61c64e
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-lan.h
@@ -0,0 +1,65 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-lan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - LAN Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_LAN_H
+#define KS8695_LAN_H
+
+#define KS8695_LAN_OFFSET (0xF0000 + 0x8000)
+#define KS8695_LAN_VA (KS8695_IO_VA + KS8695_LAN_OFFSET)
+#define KS8695_LAN_PA (KS8695_IO_PA + KS8695_LAN_OFFSET)
+
+
+/*
+ * LAN registers
+ */
+#define KS8695_LMDTXC (0x00) /* DMA Transmit Control */
+#define KS8695_LMDRXC (0x04) /* DMA Receive Control */
+#define KS8695_LMDTSC (0x08) /* DMA Transmit Start Command */
+#define KS8695_LMDRSC (0x0c) /* DMA Receive Start Command */
+#define KS8695_LTDLB (0x10) /* Transmit Descriptor List Base Address */
+#define KS8695_LRDLB (0x14) /* Receive Descriptor List Base Address */
+#define KS8695_LMAL (0x18) /* MAC Station Address Low */
+#define KS8695_LMAH (0x1c) /* MAC Station Address High */
+#define KS8695_LMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
+#define KS8695_LMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define LMDTXC_LMTRST (1 << 31) /* Soft Reset */
+#define LMDTXC_LMTBS (0x3f << 24) /* Transmit Burst Size */
+#define LMDTXC_LMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
+#define LMDTXC_LMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
+#define LMDTXC_LMTICG (1 << 16) /* Transmit IP Checksum Generate */
+#define LMDTXC_LMTFCE (1 << 9) /* Transmit Flow Control Enable */
+#define LMDTXC_LMTLB (1 << 8) /* Loopback mode */
+#define LMDTXC_LMTEP (1 << 2) /* Transmit Enable Padding */
+#define LMDTXC_LMTAC (1 << 1) /* Transmit Add CRC */
+#define LMDTXC_LMTE (1 << 0) /* TX Enable */
+
+/* DMA Receive Control Register */
+#define LMDRXC_LMRBS (0x3f << 24) /* Receive Burst Size */
+#define LMDRXC_LMRUCC (1 << 18) /* Receive UDP Checksum check */
+#define LMDRXC_LMRTCG (1 << 17) /* Receive TCP Checksum check */
+#define LMDRXC_LMRICG (1 << 16) /* Receive IP Checksum check */
+#define LMDRXC_LMRFCE (1 << 9) /* Receive Flow Control Enable */
+#define LMDRXC_LMRB (1 << 6) /* Receive Broadcast */
+#define LMDRXC_LMRM (1 << 5) /* Receive Multicast */
+#define LMDRXC_LMRU (1 << 4) /* Receive Unicast */
+#define LMDRXC_LMRERR (1 << 3) /* Receive Error Frame */
+#define LMDRXC_LMRA (1 << 2) /* Receive All */
+#define LMDRXC_LMRE (1 << 1) /* RX Enable */
+
+/* Additional Station Address High */
+#define LMAAH_E (1 << 31) /* Address Enabled */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-mem.h b/include/asm-arm/arch-ks8695/regs-mem.h
new file mode 100644
index 00000000000..76b38e0862e
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-mem.h
@@ -0,0 +1,89 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-mem.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Memory Controller registers and bit definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MEM_H
+#define KS8695_MEM_H
+
+#define KS8695_MEM_OFFSET (0xF0000 + 0x4000)
+#define KS8695_MEM_VA (KS8695_IO_VA + KS8695_MEM_OFFSET)
+#define KS8695_MEM_PA (KS8695_IO_PA + KS8695_MEM_OFFSET)
+
+
+/*
+ * Memory Controller Registers
+ */
+#define KS8695_EXTACON0 (0x00) /* External I/O 0 Access Control */
+#define KS8695_EXTACON1 (0x04) /* External I/O 1 Access Control */
+#define KS8695_EXTACON2 (0x08) /* External I/O 2 Access Control */
+#define KS8695_ROMCON0 (0x10) /* ROM/SRAM/Flash 1 Control Register */
+#define KS8695_ROMCON1 (0x14) /* ROM/SRAM/Flash 2 Control Register */
+#define KS8695_ERGCON (0x20) /* External I/O and ROM/SRAM/Flash General Register */
+#define KS8695_SDCON0 (0x30) /* SDRAM Control Register 0 */
+#define KS8695_SDCON1 (0x34) /* SDRAM Control Register 1 */
+#define KS8695_SDGCON (0x38) /* SDRAM General Control */
+#define KS8695_SDBCON (0x3c) /* SDRAM Buffer Control */
+#define KS8695_REFTIM (0x40) /* SDRAM Refresh Timer */
+
+
+/* External I/O Access Control Registers */
+#define EXTACON_EBNPTR (0x3ff << 22) /* Last Address Pointer */
+#define EXTACON_EBBPTR (0x3ff << 12) /* Base Pointer */
+#define EXTACON_EBTACT (7 << 9) /* Write Enable/Output Enable Active Time */
+#define EXTACON_EBTCOH (7 << 6) /* Chip Select Hold Time */
+#define EXTACON_EBTACS (7 << 3) /* Address Setup Time before ECSN */
+#define EXTACON_EBTCOS (7 << 0) /* Chip Select Time before OEN */
+
+/* ROM/SRAM/Flash Control Register */
+#define ROMCON_RBNPTR (0x3ff << 22) /* Next Pointer */
+#define ROMCON_RBBPTR (0x3ff << 12) /* Base Pointer */
+#define ROMCON_RBTACC (7 << 4) /* Access Cycle Time */
+#define ROMCON_RBTPA (3 << 2) /* Page Address Access Time */
+#define ROMCON_PMC (3 << 0) /* Page Mode Configuration */
+#define PMC_NORMAL (0 << 0)
+#define PMC_4WORD (1 << 0)
+#define PMC_8WORD (2 << 0)
+#define PMC_16WORD (3 << 0)
+
+/* External I/O and ROM/SRAM/Flash General Register */
+#define ERGCON_TMULT (3 << 28) /* Time Multiplier */
+#define ERGCON_DSX2 (3 << 20) /* Data Width (External I/O Bank 2) */
+#define ERGCON_DSX1 (3 << 18) /* Data Width (External I/O Bank 1) */
+#define ERGCON_DSX0 (3 << 16) /* Data Width (External I/O Bank 0) */
+#define ERGCON_DSR1 (3 << 2) /* Data Width (ROM/SRAM/Flash Bank 1) */
+#define ERGCON_DSR0 (3 << 0) /* Data Width (ROM/SRAM/Flash Bank 0) */
+
+/* SDRAM Control Register */
+#define SDCON_DBNPTR (0x3ff << 22) /* Last Address Pointer */
+#define SDCON_DBBPTR (0x3ff << 12) /* Base Pointer */
+#define SDCON_DBCAB (3 << 8) /* Column Address Bits */
+#define SDCON_DBBNUM (1 << 3) /* Number of Banks */
+#define SDCON_DBDBW (3 << 1) /* Data Bus Width */
+
+/* SDRAM General Control Register */
+#define SDGCON_SDTRC (3 << 2) /* RAS to CAS latency */
+#define SDGCON_SDCAS (3 << 0) /* CAS latency */
+
+/* SDRAM Buffer Control Register */
+#define SDBCON_SDESTA (1 << 31) /* SDRAM Engine Status */
+#define SDBCON_RBUFBDIS (1 << 24) /* Read Buffer Burst Enable */
+#define SDBCON_WFIFOEN (1 << 23) /* Write FIFO Enable */
+#define SDBCON_RBUFEN (1 << 22) /* Read Buffer Enable */
+#define SDBCON_FLUSHWFIFO (1 << 21) /* Flush Write FIFO */
+#define SDBCON_RBUFINV (1 << 20) /* Read Buffer Invalidate */
+#define SDBCON_SDINI (3 << 16) /* SDRAM Initialization Control */
+#define SDBCON_SDMODE (0x3fff << 0) /* SDRAM Mode Register Value Program */
+
+/* SDRAM Refresh Timer Register */
+#define REFTIM_REFTIM (0xffff << 0) /* Refresh Timer Value */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-misc.h b/include/asm-arm/arch-ks8695/regs-misc.h
new file mode 100644
index 00000000000..632ca6601a9
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-misc.h
@@ -0,0 +1,97 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-misc.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Miscellaneous Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MISC_H
+#define KS8695_MISC_H
+
+#define KS8695_MISC_OFFSET (0xF0000 + 0xEA00)
+#define KS8695_MISC_VA (KS8695_IO_VA + KS8695_MISC_OFFSET)
+#define KS8695_MISC_PA (KS8695_IO_PA + KS8695_MISC_OFFSET)
+
+
+/*
+ * Miscellaneous registers
+ */
+#define KS8695_DID (0x00) /* Device ID */
+#define KS8695_RID (0x04) /* Revision ID */
+#define KS8695_HMC (0x08) /* HPNA Miscellaneous Control [KS8695 only] */
+#define KS8695_WMC (0x0c) /* WAN Miscellaneous Control */
+#define KS8695_WPPM (0x10) /* WAN PHY Power Management */
+#define KS8695_PPS (0x1c) /* PHY PowerSave */
+
+/* Device ID Register */
+#define DID_ID (0xffff << 0) /* Device ID */
+
+/* Revision ID Register */
+#define RID_SUBID (0xf << 4) /* Sub-Device ID */
+#define RID_REVISION (0xf << 0) /* Revision ID */
+
+/* HPNA Miscellaneous Control Register */
+#define HMC_HSS (1 << 1) /* Speed */
+#define HMC_HDS (1 << 0) /* Duplex */
+
+/* WAN Miscellaneous Control Register */
+#define WMC_WANC (1 << 30) /* Auto-negotiation complete */
+#define WMC_WANR (1 << 29) /* Auto-negotiation restart */
+#define WMC_WANAP (1 << 28) /* Advertise Pause */
+#define WMC_WANA100F (1 << 27) /* Advertise 100 FDX */
+#define WMC_WANA100H (1 << 26) /* Advertise 100 HDX */
+#define WMC_WANA10F (1 << 25) /* Advertise 10 FDX */
+#define WMC_WANA10H (1 << 24) /* Advertise 10 HDX */
+#define WMC_WLS (1 << 23) /* Link status */
+#define WMC_WDS (1 << 22) /* Duplex status */
+#define WMC_WSS (1 << 21) /* Speed status */
+#define WMC_WLPP (1 << 20) /* Link Partner Pause */
+#define WMC_WLP100F (1 << 19) /* Link Partner 100 FDX */
+#define WMC_WLP100H (1 << 18) /* Link Partner 100 HDX */
+#define WMC_WLP10F (1 << 17) /* Link Partner 10 FDX */
+#define WMC_WLP10H (1 << 16) /* Link Partner 10 HDX */
+#define WMC_WAND (1 << 15) /* Auto-negotiation disable */
+#define WMC_WANF100 (1 << 14) /* Force 100 */
+#define WMC_WANFF (1 << 13) /* Force FDX */
+#define WMC_WLED1S (7 << 4) /* LED1 Select */
+#define WLED1S_SPEED (0 << 4)
+#define WLED1S_LINK (1 << 4)
+#define WLED1S_DUPLEX (2 << 4)
+#define WLED1S_COLLISION (3 << 4)
+#define WLED1S_ACTIVITY (4 << 4)
+#define WLED1S_FDX_COLLISION (5 << 4)
+#define WLED1S_LINK_ACTIVITY (6 << 4)
+#define WMC_WLED0S (7 << 0) /* LED0 Select */
+#define WLED0S_SPEED (0 << 0)
+#define WLED0S_LINK (1 << 0)
+#define WLED0S_DUPLEX (2 << 0)
+#define WLED0S_COLLISION (3 << 0)
+#define WLED0S_ACTIVITY (4 << 0)
+#define WLED0S_FDX_COLLISION (5 << 0)
+#define WLED0S_LINK_ACTIVITY (6 << 0)
+
+/* WAN PHY Power Management Register */
+#define WPPM_WLPBK (1 << 14) /* Local Loopback */
+#define WPPM_WRLPKB (1 << 13) /* Remove Loopback */
+#define WPPM_WPI (1 << 12) /* PHY isolate */
+#define WPPM_WFL (1 << 10) /* Force link */
+#define WPPM_MDIXS (1 << 9) /* MDIX Status */
+#define WPPM_FEF (1 << 8) /* Far End Fault */
+#define WPPM_AMDIXP (1 << 7) /* Auto MDIX Parameter */
+#define WPPM_TXDIS (1 << 6) /* Disable transmitter */
+#define WPPM_DFEF (1 << 5) /* Disable Far End Fault */
+#define WPPM_PD (1 << 4) /* Power Down */
+#define WPPM_DMDX (1 << 3) /* Disable Auto MDI/MDIX */
+#define WPPM_FMDX (1 << 2) /* Force MDIX */
+#define WPPM_LPBK (1 << 1) /* MAX Loopback */
+
+/* PHY Power Save Register */
+#define PPS_PPSM (1 << 0) /* PHY Power Save Mode */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-pci.h b/include/asm-arm/arch-ks8695/regs-pci.h
new file mode 100644
index 00000000000..286d6d488df
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-pci.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-pci.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - PCI bridge registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KS8695_PCI_OFFSET (0xF0000 + 0x2000)
+#define KS8695_PCI_VA (KS8695_IO_VA + KS8695_PCI_OFFSET)
+#define KS8695_PCI_PA (KS8695_IO_PA + KS8695_PCI_OFFSET)
+
+
+#define KS8695_CRCFID (0x000) /* Configuration: Identification */
+#define KS8695_CRCFCS (0x004) /* Configuration: Command and Status */
+#define KS8695_CRCFRV (0x008) /* Configuration: Revision */
+#define KS8695_CRCFLT (0x00C) /* Configuration: Latency Timer */
+#define KS8695_CRCBMA (0x010) /* Configuration: Base Memory Address */
+#define KS8695_CRCSID (0x02C) /* Configuration: Subsystem ID */
+#define KS8695_CRCFIT (0x03C) /* Configuration: Interrupt */
+#define KS8695_PBCA (0x100) /* Bridge Configuration Address */
+#define KS8695_PBCD (0x104) /* Bridge Configuration Data */
+#define KS8695_PBM (0x200) /* Bridge Mode */
+#define KS8695_PBCS (0x204) /* Bridge Control and Status */
+#define KS8695_PMBA (0x208) /* Bridge Memory Base Address */
+#define KS8695_PMBAC (0x20C) /* Bridge Memory Base Address Control */
+#define KS8695_PMBAM (0x210) /* Bridge Memory Base Address Mask */
+#define KS8695_PMBAT (0x214) /* Bridge Memory Base Address Translation */
+#define KS8695_PIOBA (0x218) /* Bridge I/O Base Address */
+#define KS8695_PIOBAC (0x21C) /* Bridge I/O Base Address Control */
+#define KS8695_PIOBAM (0x220) /* Bridge I/O Base Address Mask */
+#define KS8695_PIOBAT (0x224) /* Bridge I/O Base Address Translation */
+
+
+/* Configuration: Identification */
+
+/* Configuration: Command and Status */
+
+/* Configuration: Revision */
+
+
+
+#define CFRV_GUEST (1 << 23)
+
+#define PBCA_TYPE1 (1)
+#define PBCA_ENABLE (1 << 31)
+
+
diff --git a/include/asm-arm/arch-ks8695/regs-switch.h b/include/asm-arm/arch-ks8695/regs-switch.h
new file mode 100644
index 00000000000..5f37be3f2f6
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-switch.h
@@ -0,0 +1,66 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-switch.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Switch Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SWITCH_H
+#define KS8695_SWITCH_H
+
+#define KS8695_SWITCH_OFFSET (0xF0000 + 0xe800)
+#define KS8695_SWITCH_VA (KS8695_IO_VA + KS8695_SWITCH_OFFSET)
+#define KS8695_SWITCH_PA (KS8695_IO_PA + KS8695_SWITCH_OFFSET)
+
+
+/*
+ * Switch registers
+ */
+#define KS8695_SEC0 (0x00) /* Switch Engine Control 0 */
+#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */
+#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */
+
+#define KS8695_P(x)_C(z) (0xc0 + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */
+
+#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */
+#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */
+#define KS8695_SEIAC (0x50) /* Indirect Access Control */
+#define KS8695_SEIADH2 (0x54) /* Indirect Access Data High 2 */
+#define KS8695_SEIADH1 (0x58) /* Indirect Access Data High 1 */
+#define KS8695_SEIADL (0x5c) /* Indirect Access Data Low */
+#define KS8695_SEAFC (0x60) /* Advance Feature Control */
+#define KS8695_SEDSCPH (0x64) /* TOS Priority High */
+#define KS8695_SEDSCPL (0x68) /* TOS Priority Low */
+#define KS8695_SEMAH (0x6c) /* Switch Engine MAC Address High */
+#define KS8695_SEMAL (0x70) /* Switch Engine MAC Address Low */
+#define KS8695_LPPM12 (0x74) /* Port 1 & 2 PHY Power Management */
+#define KS8695_LPPM34 (0x78) /* Port 3 & 4 PHY Power Management */
+
+
+/* Switch Engine Control 0 */
+#define SEC0_LLED1S (7 << 25) /* LED1 Select */
+#define LLED1S_SPEED (0 << 25)
+#define LLED1S_LINK (1 << 25)
+#define LLED1S_DUPLEX (2 << 25)
+#define LLED1S_COLLISION (3 << 25)
+#define LLED1S_ACTIVITY (4 << 25)
+#define LLED1S_FDX_COLLISION (5 << 25)
+#define LLED1S_LINK_ACTIVITY (6 << 25)
+#define SEC0_LLED0S (7 << 22) /* LED0 Select */
+#define LLED0S_SPEED (0 << 22)
+#define LLED0S_LINK (1 << 22)
+#define LLED0S_DUPLEX (2 << 22)
+#define LLED0S_COLLISION (3 << 22)
+#define LLED0S_ACTIVITY (4 << 22)
+#define LLED0S_FDX_COLLISION (5 << 22)
+#define LLED0S_LINK_ACTIVITY (6 << 22)
+#define SEC0_ENABLE (1 << 0) /* Enable Switch */
+
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-sys.h b/include/asm-arm/arch-ks8695/regs-sys.h
new file mode 100644
index 00000000000..f3179815b8e
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-sys.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-sys.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - System control registers and bit definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SYS_H
+#define KS8695_SYS_H
+
+#define KS8695_SYS_OFFSET (0xF0000 + 0x0000)
+#define KS8695_SYS_VA (KS8695_IO_VA + KS8695_SYS_OFFSET)
+#define KS8695_SYS_PA (KS8695_IO_PA + KS8695_SYS_OFFSET)
+
+
+#define KS8695_SYSCFG (0x00) /* System Configuration Register */
+#define KS8695_CLKCON (0x04) /* System Clock and Bus Control Register */
+
+
+/* System Configuration Register */
+#define SYSCFG_SPRBP (0x3ff << 16) /* Register Bank Base Pointer */
+
+/* System Clock and Bus Control Register */
+#define CLKCON_SFMODE (1 << 8) /* System Fast Mode for Simulation */
+#define CLKCON_SCDC (7 << 0) /* System Clock Divider Select */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-timer.h b/include/asm-arm/arch-ks8695/regs-timer.h
new file mode 100644
index 00000000000..0a9f7f99ec5
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-timer.h
@@ -0,0 +1,40 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-timer.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Timer registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_TIMER_H
+#define KS8695_TIMER_H
+
+#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
+#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
+#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET)
+
+
+/*
+ * Timer registers
+ */
+#define KS8695_TMCON (0x00) /* Timer Control Register */
+#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */
+#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
+#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */
+#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */
+
+
+/* Timer Control Register */
+#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */
+#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-uart.h b/include/asm-arm/arch-ks8695/regs-uart.h
new file mode 100644
index 00000000000..a27cb20502a
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-uart.h
@@ -0,0 +1,92 @@
+/*
+ * linux/include/asm-arm/arch-ks8695/regs-uart.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - UART register and bit definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef KS8695_UART_H
+#define KS8695_UART_H
+
+#define KS8695_UART_OFFSET (0xF0000 + 0xE000)
+#define KS8695_UART_VA (KS8695_IO_VA + KS8695_UART_OFFSET)
+#define KS8695_UART_PA (KS8695_IO_PA + KS8695_UART_OFFSET)
+
+
+/*
+ * UART registers
+ */
+#define KS8695_URRB (0x00) /* Receive Buffer Register */
+#define KS8695_URTH (0x04) /* Transmit Holding Register */
+#define KS8695_URFC (0x08) /* FIFO Control Register */
+#define KS8695_URLC (0x0C) /* Line Control Register */
+#define KS8695_URMC (0x10) /* Modem Control Register */
+#define KS8695_URLS (0x14) /* Line Status Register */
+#define KS8695_URMS (0x18) /* Modem Status Register */
+#define KS8695_URBD (0x1C) /* Baud Rate Divisor Register */
+#define KS8695_USR (0x20) /* Status Register */
+
+
+/* FIFO Control Register */
+#define URFC_URFRT (3 << 6) /* Receive FIFO Trigger Level */
+#define URFC_URFRT_1 (0 << 6)
+#define URFC_URFRT_4 (1 << 6)
+#define URFC_URFRT_8 (2 << 6)
+#define URFC_URFRT_14 (3 << 6)
+#define URFC_URTFR (1 << 2) /* Transmit FIFO Reset */
+#define URFC_URRFR (1 << 1) /* Receive FIFO Reset */
+#define URFC_URFE (1 << 0) /* FIFO Enable */
+
+/* Line Control Register */
+#define URLC_URSBC (1 << 6) /* Set Break Condition */
+#define URLC_PARITY (7 << 3) /* Parity */
+#define URPE_NONE (0 << 3)
+#define URPE_ODD (1 << 3)
+#define URPE_EVEN (3 << 3)
+#define URPE_MARK (5 << 3)
+#define URPE_SPACE (7 << 3)
+#define URLC_URSB (1 << 2) /* Stop Bits */
+#define URLC_URCL (3 << 0) /* Character Length */
+#define URCL_5 (0 << 0)
+#define URCL_6 (1 << 0)
+#define URCL_7 (2 << 0)
+#define URCL_8 (3 << 0)
+
+/* Modem Control Register */
+#define URMC_URLB (1 << 4) /* Loop-back mode */
+#define URMC_UROUT2 (1 << 3) /* OUT2 signal */
+#define URMC_UROUT1 (1 << 2) /* OUT1 signal */
+#define URMC_URRTS (1 << 1) /* Request to Send */
+#define URMC_URDTR (1 << 0) /* Data Terminal Ready */
+
+/* Line Status Register */
+#define URLS_URRFE (1 << 7) /* Receive FIFO Error */
+#define URLS_URTE (1 << 6) /* Transmit Empty */
+#define URLS_URTHRE (1 << 5) /* Transmit Holding Register Empty */
+#define URLS_URBI (1 << 4) /* Break Interrupt */
+#define URLS_URFE (1 << 3) /* Framing Error */
+#define URLS_URPE (1 << 2) /* Parity Error */
+#define URLS_URROE (1 << 1) /* Receive Overrun Error */
+#define URLS_URDR (1 << 0) /* Receive Data Ready */
+
+/* Modem Status Register */
+#define URMS_URDCD (1 << 7) /* Data Carrier Detect */
+#define URMS_URRI (1 << 6) /* Ring Indicator */
+#define URMS_URDSR (1 << 5) /* Data Set Ready */
+#define URMS_URCTS (1 << 4) /* Clear to Send */
+#define URMS_URDDCD (1 << 3) /* Delta Data Carrier Detect */
+#define URMS_URTERI (1 << 2) /* Trailing Edge Ring Indicator */
+#define URMS_URDDST (1 << 1) /* Delta Data Set Ready */
+#define URMS_URDCTS (1 << 0) /* Delta Clear to Send */
+
+/* Status Register */
+#define USR_UTI (1 << 0) /* Timeout Indication */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-wan.h b/include/asm-arm/arch-ks8695/regs-wan.h
new file mode 100644
index 00000000000..52e35b0d65e
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-wan.h
@@ -0,0 +1,65 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - WAN Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_WAN_H
+#define KS8695_WAN_H
+
+#define KS8695_WAN_OFFSET (0xF0000 + 0x6000)
+#define KS8695_WAN_VA (KS8695_IO_VA + KS8695_WAN_OFFSET)
+#define KS8695_WAN_PA (KS8695_IO_PA + KS8695_WAN_OFFSET)
+
+
+/*
+ * WAN registers
+ */
+#define KS8695_WMDTXC (0x00) /* DMA Transmit Control */
+#define KS8695_WMDRXC (0x04) /* DMA Receive Control */
+#define KS8695_WMDTSC (0x08) /* DMA Transmit Start Command */
+#define KS8695_WMDRSC (0x0c) /* DMA Receive Start Command */
+#define KS8695_WTDLB (0x10) /* Transmit Descriptor List Base Address */
+#define KS8695_WRDLB (0x14) /* Receive Descriptor List Base Address */
+#define KS8695_WMAL (0x18) /* MAC Station Address Low */
+#define KS8695_WMAH (0x1c) /* MAC Station Address High */
+#define KS8695_WMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
+#define KS8695_WMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define WMDTXC_WMTRST (1 << 31) /* Soft Reset */
+#define WMDTXC_WMTBS (0x3f << 24) /* Transmit Burst Size */
+#define WMDTXC_WMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
+#define WMDTXC_WMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
+#define WMDTXC_WMTICG (1 << 16) /* Transmit IP Checksum Generate */
+#define WMDTXC_WMTFCE (1 << 9) /* Transmit Flow Control Enable */
+#define WMDTXC_WMTLB (1 << 8) /* Loopback mode */
+#define WMDTXC_WMTEP (1 << 2) /* Transmit Enable Padding */
+#define WMDTXC_WMTAC (1 << 1) /* Transmit Add CRC */
+#define WMDTXC_WMTE (1 << 0) /* TX Enable */
+
+/* DMA Receive Control Register */
+#define WMDRXC_WMRBS (0x3f << 24) /* Receive Burst Size */
+#define WMDRXC_WMRUCC (1 << 18) /* Receive UDP Checksum check */
+#define WMDRXC_WMRTCG (1 << 17) /* Receive TCP Checksum check */
+#define WMDRXC_WMRICG (1 << 16) /* Receive IP Checksum check */
+#define WMDRXC_WMRFCE (1 << 9) /* Receive Flow Control Enable */
+#define WMDRXC_WMRB (1 << 6) /* Receive Broadcast */
+#define WMDRXC_WMRM (1 << 5) /* Receive Multicast */
+#define WMDRXC_WMRU (1 << 4) /* Receive Unicast */
+#define WMDRXC_WMRERR (1 << 3) /* Receive Error Frame */
+#define WMDRXC_WMRA (1 << 2) /* Receive All */
+#define WMDRXC_WMRE (1 << 0) /* RX Enable */
+
+/* Additional Station Address High */
+#define WMAAH_E (1 << 31) /* Address Enabled */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/system.h b/include/asm-arm/arch-ks8695/system.h
new file mode 100644
index 00000000000..3bc28106d93
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/system.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-arm/arch-s3c2410/system.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <asm/arch/regs-timer.h>
+
+static void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks,
+ */
+ cpu_do_idle();
+
+}
+
+static void arch_reset(char mode)
+{
+ unsigned int reg;
+
+ if (mode == 's')
+ cpu_reset(0);
+
+ /* disable timer0 */
+ reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+ __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+
+ /* enable watchdog mode */
+ __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+
+ /* re-enable timer0 */
+ __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+}
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/timex.h b/include/asm-arm/arch-ks8695/timex.h
new file mode 100644
index 00000000000..8320d528b90
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/timex.h
@@ -0,0 +1,20 @@
+/*
+ * include/asm-arm/arch-ks8695/timex.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - Time Parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* timers are derived from MCLK, which is 25MHz */
+#define CLOCK_TICK_RATE 25000000
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/uncompress.h b/include/asm-arm/arch-ks8695/uncompress.h
new file mode 100644
index 00000000000..733a50855b5
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-arm/arch-ks8695/uncompress.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Kernel uncompressor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <asm/arch/regs-uart.h>
+
+static void putc(char c)
+{
+ while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
+ barrier();
+
+ __raw_writel(c, KS8695_UART_PA + KS8695_URTH);
+}
+
+static inline void flush(void)
+{
+ while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
+ barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/vmalloc.h b/include/asm-arm/arch-ks8695/vmalloc.h
new file mode 100644
index 00000000000..d1d88e58117
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-arm/arch-ks8695/vmalloc.h
+ *
+ * Copyright (C) 2006 Ben Dooks
+ * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
+ *
+ * KS8695 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (KS8695_IO_VA & PGDIR_MASK)
+
+#endif
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index 828cc5c114e..f1ec2edd404 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -421,7 +421,9 @@ enum omap24xx_index {
/* 24xx clock */
W14_24XX_SYS_CLKOUT,
- /* 24xx GPMC wait pin monitoring */
+ /* 24xx GPMC chipselects, wait pin monitoring */
+ E2_GPMC_NCS2,
+ L2_GPMC_NCS7,
L3_GPMC_WAIT0,
N7_GPMC_WAIT1,
M1_GPMC_WAIT2,
@@ -435,6 +437,7 @@ enum omap24xx_index {
/* 24xx GPIO */
M21_242X_GPIO11,
+ P21_242X_GPIO12,
AA10_242X_GPIO13,
AA6_242X_GPIO14,
AA4_242X_GPIO15,
@@ -444,7 +447,9 @@ enum omap24xx_index {
Y20_24XX_GPIO60,
W4__24XX_GPIO74,
M15_24XX_GPIO92,
+ J15_24XX_GPIO99,
V14_24XX_GPIO117,
+ P14_24XX_GPIO125,
/* 242x DBG GPIO */
V4_242X_GPIO49,
@@ -486,6 +491,30 @@ enum omap24xx_index {
G18_24XX_MMC_CMD_DIR,
H15_24XX_MMC_CLKI,
+ /* Full speed USB */
+ J20_24XX_USB0_PUEN,
+ J19_24XX_USB0_VP,
+ K20_24XX_USB0_VM,
+ J18_24XX_USB0_RCV,
+ K19_24XX_USB0_TXEN,
+ J14_24XX_USB0_SE0,
+ K18_24XX_USB0_DAT,
+
+ N14_24XX_USB1_SE0,
+ W12_24XX_USB1_SE0,
+ P15_24XX_USB1_DAT,
+ R13_24XX_USB1_DAT,
+ W20_24XX_USB1_TXEN,
+ P13_24XX_USB1_TXEN,
+ V19_24XX_USB1_RCV,
+ V12_24XX_USB1_RCV,
+
+ AA10_24XX_USB2_SE0,
+ Y11_24XX_USB2_DAT,
+ AA12_24XX_USB2_TXEN,
+ AA6_24XX_USB2_RCV,
+ AA4_24XX_USB2_TLLSE0,
+
/* Keypad GPIO*/
T19_24XX_KBR0,
R19_24XX_KBR1,
diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S
index 138838d4ad7..3b4e2076603 100644
--- a/include/asm-arm/arch-realview/entry-macro.S
+++ b/include/asm-arm/arch-realview/entry-macro.S
@@ -14,6 +14,7 @@
.endm
.macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(REALVIEW_GIC_CPU_BASE)
.endm
.macro arch_ret_to_user, tmp1, tmp2
@@ -40,7 +41,6 @@
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =IO_ADDRESS(REALVIEW_GIC_CPU_BASE)
ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
ldr \tmp, =1021
diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/include/asm-arm/arch-rpc/entry-macro.S
index 0cfb89b229d..038b761fdad 100644
--- a/include/asm-arm/arch-rpc/entry-macro.S
+++ b/include/asm-arm/arch-rpc/entry-macro.S
@@ -1,6 +1,14 @@
#include <asm/hardware.h>
#include <asm/hardware/entry-macro-iomd.S>
+
+ .equ ioc_base_high, IOC_BASE & 0xff000000
+ .equ ioc_base_low, IOC_BASE & 0x00ff0000
+
.macro get_irqnr_preamble, base, tmp
+ mov \base, #ioc_base_high @ point at IOC
+ .if ioc_base_low
+ orr \base, \base, #ioc_base_low
+ .endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
index cd9e26568f8..c1414658d1c 100644
--- a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
+++ b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
@@ -129,6 +129,7 @@
#define S3C2443_PCLKCON_IIC (1<<4)
#define S3C2443_PCLKCON_SDI (1<<5)
#define S3C2443_PCLKCON_ADC (1<<7)
+#define S3C2443_PCLKCON_AC97 (1<<8)
#define S3C2443_PCLKCON_IIS (1<<9)
#define S3C2443_PCLKCON_PWMT (1<<10)
#define S3C2443_PCLKCON_WDT (1<<11)
diff --git a/include/asm-arm/arch-sa1100/entry-macro.S b/include/asm-arm/arch-sa1100/entry-macro.S
index 02896762934..127db4aaf4f 100644
--- a/include/asm-arm/arch-sa1100/entry-macro.S
+++ b/include/asm-arm/arch-sa1100/entry-macro.S
@@ -12,16 +12,16 @@
.endm
.macro get_irqnr_preamble, base, tmp
+ mov \base, #0xfa000000 @ ICIP = 0xfa050000
+ add \base, \base, #0x00050000
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov r4, #0xfa000000 @ ICIP = 0xfa050000
- add r4, r4, #0x00050000
- ldr \irqstat, [r4] @ get irqs
- ldr \irqnr, [r4, #4] @ ICMR = 0xfa050004
+ ldr \irqstat, [\base] @ get irqs
+ ldr \irqnr, [\base, #4] @ ICMR = 0xfa050004
ands \irqstat, \irqstat, \irqnr
mov \irqnr, #0
beq 1001f
diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/include/asm-arm/arch-versatile/entry-macro.S
index 0fae002637a..924d1a8fe36 100644
--- a/include/asm-arm/arch-versatile/entry-macro.S
+++ b/include/asm-arm/arch-versatile/entry-macro.S
@@ -14,13 +14,13 @@
.endm
.macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(VERSATILE_VIC_BASE)
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =IO_ADDRESS(VERSATILE_VIC_BASE)
ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
mov \irqnr, #0
teq \irqstat, #0
diff --git a/include/asm-arm/ecard.h b/include/asm-arm/ecard.h
index 3a6d3eb2762..684fe064523 100644
--- a/include/asm-arm/ecard.h
+++ b/include/asm-arm/ecard.h
@@ -121,7 +121,7 @@ struct in_ecid { /* Packed card ID information */
typedef struct expansion_card ecard_t;
typedef unsigned long *loader_t;
-typedef struct { /* Card handler routines */
+typedef struct expansion_card_ops { /* Card handler routines */
void (*irqenable)(ecard_t *ec, int irqnr);
void (*irqdisable)(ecard_t *ec, int irqnr);
int (*irqpending)(ecard_t *ec);
@@ -179,6 +179,8 @@ struct expansion_card {
u64 dma_mask;
};
+void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data);
+
struct in_chunk_dir {
unsigned int start_offset;
union {
@@ -224,6 +226,10 @@ ecard_address(struct expansion_card *ec, card_type_t type, card_speed_t speed)
extern int ecard_request_resources(struct expansion_card *ec);
extern void ecard_release_resources(struct expansion_card *ec);
+void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
+ unsigned long offset, unsigned long maxsize);
+#define ecardm_iounmap(__ec, __addr) devm_iounmap(&(__ec)->dev, __addr)
+
extern struct bus_type ecard_bus_type;
#define ECARD_DEV(_d) container_of((_d), struct expansion_card, dev)
diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/include/asm-arm/hardware/entry-macro-iomd.S
index fbed08f298d..9bb580a5b15 100644
--- a/include/asm-arm/hardware/entry-macro-iomd.S
+++ b/include/asm-arm/hardware/entry-macro-iomd.S
@@ -11,8 +11,6 @@
/* IOC / IOMD based hardware */
#include <asm/hardware/iomd.h>
- .equ ioc_base_high, IOC_BASE & 0xff000000
- .equ ioc_base_low, IOC_BASE & 0x00ff0000
.macro disable_fiq
mov r12, #ioc_base_high
.if ioc_base_low
@@ -22,33 +20,29 @@
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov r4, #ioc_base_high @ point at IOC
- .if ioc_base_low
- orr r4, r4, #ioc_base_low
- .endif
- ldrb \irqstat, [r4, #IOMD_IRQREQB] @ get high priority first
- ldr \base, =irq_prio_h
+ ldrb \irqstat, [\base, #IOMD_IRQREQB] @ get high priority first
+ ldr \tmp, =irq_prio_h
teq \irqstat, #0
#ifdef IOMD_BASE
- ldreqb \irqstat, [r4, #IOMD_DMAREQ] @ get dma
- addeq \base, \base, #256 @ irq_prio_h table size
+ ldreqb \irqstat, [\base, #IOMD_DMAREQ] @ get dma
+ addeq \tmp, \tmp, #256 @ irq_prio_h table size
teqeq \irqstat, #0
bne 2406f
#endif
- ldreqb \irqstat, [r4, #IOMD_IRQREQA] @ get low priority
- addeq \base, \base, #256 @ irq_prio_d table size
+ ldreqb \irqstat, [\base, #IOMD_IRQREQA] @ get low priority
+ addeq \tmp, \tmp, #256 @ irq_prio_d table size
teqeq \irqstat, #0
#ifdef IOMD_IRQREQC
- ldreqb \irqstat, [r4, #IOMD_IRQREQC]
- addeq \base, \base, #256 @ irq_prio_l table size
+ ldreqb \irqstat, [\base, #IOMD_IRQREQC]
+ addeq \tmp, \tmp, #256 @ irq_prio_l table size
teqeq \irqstat, #0
#endif
#ifdef IOMD_IRQREQD
- ldreqb \irqstat, [r4, #IOMD_IRQREQD]
- addeq \base, \base, #256 @ irq_prio_lc table size
+ ldreqb \irqstat, [\base, #IOMD_IRQREQD]
+ addeq \tmp, \tmp, #256 @ irq_prio_lc table size
teqeq \irqstat, #0
#endif
-2406: ldrneb \irqnr, [\base, \irqstat] @ get IRQ number
+2406: ldrneb \irqnr, [\tmp, \irqstat] @ get IRQ number
.endm
/*
diff --git a/include/asm-arm/sizes.h b/include/asm-arm/sizes.h
index 7f50ae0edf1..503843db156 100644
--- a/include/asm-arm/sizes.h
+++ b/include/asm-arm/sizes.h
@@ -24,6 +24,10 @@
#define __sizes_h 1
/* handy sizes */
+#define SZ_16 0x00000010
+#define SZ_256 0x00000100
+#define SZ_512 0x00000200
+
#define SZ_1K 0x00000400
#define SZ_4K 0x00001000
#define SZ_8K 0x00002000
diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
index 2bdc5bd6f79..a762f42cbb7 100644
--- a/include/asm-avr32/arch-at32ap/cpu.h
+++ b/include/asm-avr32/arch-at32ap/cpu.h
@@ -29,5 +29,6 @@
#define cpu_is_at91sam9260() (0)
#define cpu_is_at91sam9261() (0)
#define cpu_is_at91sam9263() (0)
+#define cpu_is_at91sam9rl() (0)
#endif /* __ASM_ARCH_CPU_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index aa2653a159f..a3ac4c89683 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -139,6 +139,10 @@
/* Blackfin bf5xx */
#define PORT_BFIN 75
+/* Micrel KS8695 */
+#define PORT_KS8695 76
+
+
#ifdef __KERNEL__
#include <linux/compiler.h>