diff options
-rw-r--r-- | drivers/staging/rtl8192su/Makefile | 2 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c | 5 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c | 4 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c | 22 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/r8180_93cx6.h | 5 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/r8192S_Efuse.c | 2 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/r8192S_firmware.c | 434 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/r8192S_hw.h | 2 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/r8192S_phy.c | 95 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/r8192S_rtl6052.c | 27 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/r8192U.h | 190 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/r8192U_core.c | 1738 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/r8192U_dm.c | 178 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/r8192U_wx.c | 12 | ||||
-rw-r--r-- | drivers/staging/rtl8192su/r819xU_cmdpkt.c | 77 |
15 files changed, 1 insertions, 2792 deletions
diff --git a/drivers/staging/rtl8192su/Makefile b/drivers/staging/rtl8192su/Makefile index 4ab0af87fe3..aa9f80664de 100644 --- a/drivers/staging/rtl8192su/Makefile +++ b/drivers/staging/rtl8192su/Makefile @@ -7,8 +7,6 @@ EXTRA_CFLAGS += -mhard-float -DCONFIG_FORCE_HARD_FLOAT=y EXTRA_CFLAGS += -DJACKSON_NEW_RX EXTRA_CFLAGS += -DTHOMAS_BEACON -EXTRA_CFLAGS += -DRTL8192SU - #EXTRA_CFLAGS += -DMUTIPLE_BULK_OUT r8192s_usb-objs := \ diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c index 8591013c5f6..cdcd18d580e 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c @@ -230,7 +230,6 @@ int ieee80211_wx_get_rate(struct ieee80211_device *ieee, union iwreq_data *wrqu, char *extra) { u32 tmp_rate = 0; -#ifdef RTL8192SU //printk("===>mode:%d, halfNmode:%d\n", ieee->mode, ieee->bHalfWirelessN24GMode); if (ieee->mode & (IEEE_A | IEEE_B | IEEE_G)) tmp_rate = ieee->rate; @@ -243,10 +242,6 @@ int ieee80211_wx_get_rate(struct ieee80211_device *ieee, else tmp_rate = HTMcsToDataRate(ieee, 15); } -#else - tmp_rate = TxCountToDataRate(ieee, ieee->softmac_stats.CurrentShowTxate); - -#endif wrqu->bitrate.value = tmp_rate * 500000; return 0; diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c index 1d7c9107fa9..ecc0085619b 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c @@ -495,11 +495,7 @@ void ieee80211_query_protectionmode(struct ieee80211_device* ieee, cb_desc* tcb_ { tcb_desc->bCTSEnable = true; tcb_desc->rts_rate = MGN_24M; -#if defined(RTL8192SU) tcb_desc->bRTSEnable = false; -#else - tcb_desc->bRTSEnable = true; -#endif break; } else if(pHTInfo->IOTAction & (HT_IOT_ACT_FORCED_RTS|HT_IOT_ACT_PURE_N_MODE)) diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c index 20ee5fb458d..7839a1e0d1f 100644 --- a/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c +++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c @@ -516,7 +516,6 @@ bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device* ieee) //#endif #endif #if 1 -#if defined(RTL8192SU) PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; if(ieee->is_ap_in_wep_tkip && ieee->is_ap_in_wep_tkip(ieee->dev)) { @@ -526,7 +525,6 @@ bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device* ieee) retValue = true; } #endif -#endif return retValue; } @@ -595,7 +593,6 @@ u8 HTIOTActIsForcedRTSCTS(struct ieee80211_device *ieee, struct ieee80211_networ u8 retValue = 0; printk("============>%s(), %d\n", __FUNCTION__, network->realtek_cap_exit); // Force protection -#if defined(RTL8192SU) if(ieee->pHTInfo->bCurrentHTSupport) { //if(!network->realtek_cap_exit) @@ -606,7 +603,6 @@ u8 HTIOTActIsForcedRTSCTS(struct ieee80211_device *ieee, struct ieee80211_networ retValue = 1; } } -#endif return retValue; } @@ -640,7 +636,6 @@ HTIOCActRejcectADDBARequest(struct ieee80211_network *network) //if(IS_HARDWARE_TYPE_8192SE(Adapter) || // IS_HARDWARE_TYPE_8192SU(Adapter) //) -#if defined RTL8192SU { // Do not reject ADDBA REQ because some of the AP may // keep on sending ADDBA REQ qhich cause DHCP fail or ping loss! @@ -650,7 +645,6 @@ HTIOCActRejcectADDBARequest(struct ieee80211_network *network) // return FALSE; } -#endif return retValue; @@ -664,7 +658,6 @@ HTIOCActRejcectADDBARequest(struct ieee80211_network *network) { u8 retValue = 0; //if(IS_HARDWARE_TYPE_8192SU(Adapter)) -#ifdef RTL8192SU PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; { //#if UNDER_VISTA @@ -678,7 +671,6 @@ HTIOCActRejcectADDBARequest(struct ieee80211_network *network) return 1; } -#endif return retValue; } @@ -733,7 +725,6 @@ HTIOTActIsDisableTx40MHz(struct ieee80211_device* ieee,struct ieee80211_network { u8 retValue = 0; -#if defined RTL8192SU PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; if( (KEY_TYPE_WEP104 == ieee->pairwise_key_type) || (KEY_TYPE_WEP40 == ieee->pairwise_key_type) || @@ -744,7 +735,6 @@ HTIOTActIsDisableTx40MHz(struct ieee80211_device* ieee,struct ieee80211_network if((pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK) && (network->bssht.bdSupportHT)) retValue = 1; } -#endif return retValue; } @@ -754,7 +744,6 @@ HTIOTActIsTxNoAggregation(struct ieee80211_device* ieee,struct ieee80211_network { u8 retValue = 0; -#if defined RTL8192SU PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; if( (KEY_TYPE_WEP104 == ieee->pairwise_key_type) || (KEY_TYPE_WEP40 == ieee->pairwise_key_type) || @@ -766,7 +755,6 @@ HTIOTActIsTxNoAggregation(struct ieee80211_device* ieee,struct ieee80211_network pHTInfo->IOTPeer==HT_IOT_PEER_UNKNOWN) retValue = 1; } -#endif return retValue; } @@ -777,7 +765,6 @@ HTIOTActIsDisableTx2SS(struct ieee80211_device* ieee,struct ieee80211_network *n { u8 retValue = 0; -#if defined RTL8192SU PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; if( (KEY_TYPE_WEP104 == ieee->pairwise_key_type) || (KEY_TYPE_WEP40 == ieee->pairwise_key_type) || @@ -788,7 +775,6 @@ HTIOTActIsDisableTx2SS(struct ieee80211_device* ieee,struct ieee80211_network *n if((pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK) && (network->bssht.bdSupportHT)) retValue = 1; } -#endif return retValue; } @@ -797,14 +783,12 @@ HTIOTActIsDisableTx2SS(struct ieee80211_device* ieee,struct ieee80211_network *n bool HTIOCActAllowPeerAggOnePacket(struct ieee80211_device* ieee,struct ieee80211_network *network) { bool retValue = false; -#if defined(RTL8192SU) PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; { if(pHTInfo->IOTPeer == HT_IOT_PEER_MARVELL) return true; } -#endif return retValue; } @@ -1783,11 +1767,9 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80 //if(bIOTAction) // pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_RTS; -#if defined(RTL8192SU) bIOTAction = HTIOCActRejcectADDBARequest(pNetwork); if(bIOTAction) pHTInfo->IOTAction |= HT_IOT_ACT_REJECT_ADDBA_REQ; -#endif bIOTAction = HTIOCActAllowPeerAggOnePacket(ieee, pNetwork); if(bIOTAction) @@ -1797,7 +1779,6 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80 if(bIOTAction) pHTInfo->IOTAction |= HT_IOT_ACT_EDCA_BIAS_ON_RX; -#if defined(RTL8192SU) bIOTAction = HTIOTActDisableShortGI(ieee, pNetwork); if(bIOTAction) pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_SHORT_GI; @@ -1805,13 +1786,11 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80 bIOTAction = HTIOTActDisableHighPower(ieee, pNetwork); if(bIOTAction) pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_HIGH_POWER; -#endif bIOTAction = HTIOTActIsForcedAMSDU8K(ieee, pNetwork); if(bIOTAction) pHTInfo->IOTAction |= HT_IOT_ACT_TX_USE_AMSDU_8K; -#if defined(RTL8192SU) bIOTAction = HTIOTActIsTxNoAggregation(ieee, pNetwork); if(bIOTAction) pHTInfo->IOTAction |= HT_IOT_ACT_TX_NO_AGGREGATION; @@ -1823,7 +1802,6 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80 bIOTAction = HTIOTActIsDisableTx2SS(ieee, pNetwork); if(bIOTAction) pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_TX_2SS; -#endif //must after HT_IOT_ACT_TX_NO_AGGREGATION bIOTAction = HTIOTActIsForcedRTSCTS(ieee, pNetwork); if(bIOTAction) diff --git a/drivers/staging/rtl8192su/r8180_93cx6.h b/drivers/staging/rtl8192su/r8180_93cx6.h index ca228d36817..0309800255c 100644 --- a/drivers/staging/rtl8192su/r8180_93cx6.h +++ b/drivers/staging/rtl8192su/r8180_93cx6.h @@ -13,13 +13,8 @@ /*This files contains card eeprom (93c46 or 93c56) programming routines*/ /*memory is addressed by WORDS*/ -#ifdef RTL8192SU #include "r8192U.h" #include "r8192S_hw.h" -#else -#include "r8192U.h" -#include "r8192U_hw.h" -#endif #define EPROM_DELAY 10 diff --git a/drivers/staging/rtl8192su/r8192S_Efuse.c b/drivers/staging/rtl8192su/r8192S_Efuse.c index deb9a43665f..85e84a75a49 100644 --- a/drivers/staging/rtl8192su/r8192S_Efuse.c +++ b/drivers/staging/rtl8192su/r8192S_Efuse.c @@ -35,7 +35,6 @@ // // In the future, we will always support EFUSE!! // -#ifdef RTL8192SU /*---------------------------Define Local Constant---------------------------*/ #define _POWERON_DELAY_ #define _PRE_EXECUTE_READ_CMD_ @@ -2401,7 +2400,6 @@ void efuset_test_func_write(struct net_device* dev) -#endif // #if (HAL_CODE_BASE == RTL8192_S) diff --git a/drivers/staging/rtl8192su/r8192S_firmware.c b/drivers/staging/rtl8192su/r8192S_firmware.c index 3eaa1ee586d..f508c626064 100644 --- a/drivers/staging/rtl8192su/r8192S_firmware.c +++ b/drivers/staging/rtl8192su/r8192S_firmware.c @@ -11,19 +11,13 @@ * NDIS_STATUS_FAILURE - the following initialization process should be terminated * NDIS_STATUS_SUCCESS - if firmware initialization process success **************************************************************************************************/ -#if defined(RTL8192SU) #include "r8192U.h" #include "r8192S_firmware.h" #include <linux/unistd.h> -#ifdef RTL8192SU #include "r8192S_hw.h" #include "r8192SU_HWImg.h" //#include "r8192S_FwImgDTM.h" -#else -//#include "r8192U_hw.h" -#include "r8192xU_firmware_img.h" -#endif #include <linux/firmware.h> @@ -342,11 +336,9 @@ u8 FirmwareHeaderMapRfType(struct net_device *dev) void FirmwareHeaderPriveUpdate(struct net_device *dev, PRT_8192S_FIRMWARE_PRIV pFwPriv) { struct r8192_priv *priv = ieee80211_priv(dev); -#ifdef RTL8192SU // Update USB endpoint number for RQPN settings. pFwPriv->usb_ep_num = priv->EEPROMUsbEndPointNumber; // endpoint number: 4, 6 and 11. RT_TRACE(COMP_INIT, "FirmwarePriveUpdate(): usb_ep_num(%#x)\n", pFwPriv->usb_ep_num); -#endif // Update RF types for RATR settings. pFwPriv->rf_config = FirmwareHeaderMapRfType(dev); @@ -551,430 +543,4 @@ bool FirmwareDownload92S(struct net_device *dev) rtStatus = false; return rtStatus; } -#else -void firmware_init_param(struct net_device *dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - rt_firmware *pfirmware = priv->pFirmware; - - pfirmware->cmdpacket_frag_thresold = GET_COMMAND_PACKET_FRAG_THRESHOLD(MAX_TRANSMIT_BUFFER_SIZE); -} - -/* - * segment the img and use the ptr and length to remember info on each segment - * - */ -bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, u32 buffer_len) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - bool rt_status = true; - //u16 frag_threshold; - u16 frag_length, frag_offset = 0; - //u16 total_size; - int i; - - //rt_firmware *pfirmware = priv->pFirmware; - struct sk_buff *skb; - unsigned char *seg_ptr; - cb_desc *tcb_desc; - u8 bLastIniPkt; - -#ifndef RTL8192SU - if(buffer_len >= 64000-USB_HWDESC_HEADER_LEN) - { - return rt_status; - } - firmware_init_param(dev); - //Fragmentation might be required - frag_threshold = pfirmware->cmdpacket_frag_thresold; -#endif - - do { -#ifndef RTL8192SU - if((buffer_len - frag_offset) > frag_threshold) { - frag_length = frag_threshold ; - bLastIniPkt = 0; - - } else -#endif - { - frag_length = buffer_len - frag_offset; - bLastIniPkt = 1; - - } - - /* Allocate skb buffer to contain firmware info and tx descriptor info - * add 4 to avoid packet appending overflow. - * */ - #ifdef RTL8192U - skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4); - #else - skb = dev_alloc_skb(frag_length + 4); - #endif - memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev)); - tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE); - tcb_desc->queue_index = TXCMD_QUEUE; - tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT; - tcb_desc->bLastIniPkt = bLastIniPkt; - - #ifdef RTL8192U - skb_reserve(skb, USB_HWDESC_HEADER_LEN); - #endif - seg_ptr = skb->data; - /* - * Transform from little endian to big endian - * and pending zero - */ - for(i=0 ; i < frag_length; i+=4) { - *seg_ptr++ = ((i+0)<frag_length)?code_virtual_address[i+3]:0; - *seg_ptr++ = ((i+1)<frag_length)?code_virtual_address[i+2]:0; - *seg_ptr++ = ((i+2)<frag_length)?code_virtual_address[i+1]:0; - *seg_ptr++ = ((i+3)<frag_length)?code_virtual_address[i+0]:0; - } - tcb_desc->txbuf_size= (u16)i; - skb_put(skb, i); - - if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)|| - (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\ - (priv->ieee80211->queue_stop) ) { - RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n"); - skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb); - } else { - priv->ieee80211->softmac_hard_start_xmit(skb,dev); - } - - code_virtual_address += frag_length; - frag_offset += frag_length; - - }while(frag_offset < buffer_len); - - return rt_status; - -#if 0 -cmdsend_downloadcode_fail: - rt_status = false; - RT_TRACE(COMP_ERR, "CmdSendDownloadCode fail !!\n"); - return rt_status; -#endif -} - -bool -fwSendNullPacket( - struct net_device *dev, - u32 Length -) -{ - bool rtStatus = true; - struct r8192_priv *priv = ieee80211_priv(dev); - struct sk_buff *skb; - cb_desc *tcb_desc; - unsigned char *ptr_buf; - bool bLastInitPacket = false; - - //PlatformAcquireSpinLock(dev, RT_TX_SPINLOCK); - - //Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ) - skb = dev_alloc_skb(Length+ 4); - memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev)); - tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE); - tcb_desc->queue_index = TXCMD_QUEUE; - tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT; - tcb_desc->bLastIniPkt = bLastInitPacket; - ptr_buf = skb_put(skb, Length); - memset(ptr_buf,0,Length); - tcb_desc->txbuf_size= (u16)Length; - - if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)|| - (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\ - (priv->ieee80211->queue_stop) ) { - RT_TRACE(COMP_FIRMWARE,"===================NULL packet==================================> tx full!\n"); - skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb); - } else { - priv->ieee80211->softmac_hard_start_xmit(skb,dev); - } - - //PlatformReleaseSpinLock(dev, RT_TX_SPINLOCK); - return rtStatus; -} - -//----------------------------------------------------------------------------- -// Procedure: Check whether main code is download OK. If OK, turn on CPU -// -// Description: CPU register locates in different page against general register. -// Switch to CPU register in the begin and switch back before return -// -// -// Arguments: The pointer of the dev -// -// Returns: -// NDIS_STATUS_FAILURE - the following initialization process should be terminated -// NDIS_STATUS_SUCCESS - if firmware initialization process success -//----------------------------------------------------------------------------- -bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev) -{ - bool rt_status = true; - int check_putcodeOK_time = 200000, check_bootOk_time = 200000; - u32 CPU_status = 0; - - /* Check whether put code OK */ - do { - CPU_status = read_nic_dword(dev, CPU_GEN); - - if(CPU_status&CPU_GEN_PUT_CODE_OK) - break; - - }while(check_putcodeOK_time--); - - if(!(CPU_status&CPU_GEN_PUT_CODE_OK)) { - RT_TRACE(COMP_ERR, "Download Firmware: Put code fail!\n"); - goto CPUCheckMainCodeOKAndTurnOnCPU_Fail; - } else { - RT_TRACE(COMP_FIRMWARE, "Download Firmware: Put code ok!\n"); - } - - /* Turn On CPU */ - CPU_status = read_nic_dword(dev, CPU_GEN); - write_nic_byte(dev, CPU_GEN, (u8)((CPU_status|CPU_GEN_PWR_STB_CPU)&0xff)); - mdelay(1000); - - /* Check whether CPU boot OK */ - do { - CPU_status = read_nic_dword(dev, CPU_GEN); - - if(CPU_status&CPU_GEN_BOOT_RDY) - break; - }while(check_bootOk_time--); - - if(!(CPU_status&CPU_GEN_BOOT_RDY)) { - goto CPUCheckMainCodeOKAndTurnOnCPU_Fail; - } else { - RT_TRACE(COMP_FIRMWARE, "Download Firmware: Boot ready!\n"); - } - - return rt_status; - -CPUCheckMainCodeOKAndTurnOnCPU_Fail: - RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__); - rt_status = FALSE; - return rt_status; -} - -bool CPUcheck_firmware_ready(struct net_device *dev) -{ - - bool rt_status = true; - int check_time = 200000; - u32 CPU_status = 0; - - /* Check Firmware Ready */ - do { - CPU_status = read_nic_dword(dev, CPU_GEN); - - if(CPU_status&CPU_GEN_FIRM_RDY) - break; - - }while(check_time--); - - if(!(CPU_status&CPU_GEN_FIRM_RDY)) - goto CPUCheckFirmwareReady_Fail; - else - RT_TRACE(COMP_FIRMWARE, "Download Firmware: Firmware ready!\n"); - - return rt_status; - -CPUCheckFirmwareReady_Fail: - RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__); - rt_status = false; - return rt_status; - -} - -bool init_firmware(struct net_device *dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - bool rt_status = TRUE; - - u8 *firmware_img_buf[3] = { &rtl8190_fwboot_array[0], - &rtl8190_fwmain_array[0], - &rtl8190_fwdata_array[0]}; - - u32 firmware_img_len[3] = { sizeof(rtl8190_fwboot_array), - sizeof(rtl8190_fwmain_array), - sizeof(rtl8190_fwdata_array)}; - u32 file_length = 0; - u8 *mapped_file = NULL; - u32 init_step = 0; - opt_rst_type_e rst_opt = OPT_SYSTEM_RESET; - firmware_init_step_e starting_state = FW_INIT_STEP0_BOOT; - - rt_firmware *pfirmware = priv->pFirmware; - const struct firmware *fw_entry; - const char *fw_name[3] = { "RTL8192U/boot.img", - "RTL8192U/main.img", - "RTL8192U/data.img"}; - int rc; - - RT_TRACE(COMP_FIRMWARE, " PlatformInitFirmware()==>\n"); - - if (pfirmware->firmware_status == FW_STATUS_0_INIT ) { - /* it is called by reset */ - rst_opt = OPT_SYSTEM_RESET; - starting_state = FW_INIT_STEP0_BOOT; - // TODO: system reset - - }else if(pfirmware->firmware_status == FW_STATUS_5_READY) { - /* it is called by Initialize */ - rst_opt = OPT_FIRMWARE_RESET; - starting_state = FW_INIT_STEP2_DATA; - }else { - RT_TRACE(COMP_FIRMWARE, "PlatformInitFirmware: undefined firmware state\n"); - } - - /* - * Download boot, main, and data image for System reset. - * Download data image for firmware reseta - */ - priv->firmware_source = FW_SOURCE_IMG_FILE; - - for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) { - /* - * Open Image file, and map file to contineous memory if open file success. - * or read image file from array. Default load from IMG file - */ - if(rst_opt == OPT_SYSTEM_RESET) { - switch(priv->firmware_source) { - case FW_SOURCE_IMG_FILE: - rc = request_firmware(&fw_entry, fw_name[init_step],&priv->udev->dev); - if(rc < 0 ) { - RT_TRACE(COMP_ERR, "request firmware fail!\n"); - goto download_firmware_fail; - } - - if(fw_entry->size > sizeof(pfirmware->firmware_buf)) { - RT_TRACE(COMP_ERR, "img file size exceed the container buffer fail!\n"); - goto download_firmware_fail; - } - - if(init_step != FW_INIT_STEP1_MAIN) { - memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size); - mapped_file = pfirmware->firmware_buf; - file_length = fw_entry->size; - } else { - #ifdef RTL8190P - memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size); - mapped_file = pfirmware->firmware_buf; - file_length = fw_entry->size; - #else - memset(pfirmware->firmware_buf,0,128); - memcpy(&pfirmware->firmware_buf[128],fw_entry->data,fw_entry->size); - mapped_file = pfirmware->firmware_buf; - file_length = fw_entry->size + 128; - #endif - } - pfirmware->firmware_buf_size = file_length; - break; - - case FW_SOURCE_HEADER_FILE: - mapped_file = firmware_img_buf[init_step]; - file_length = firmware_img_len[init_step]; - if(init_step == FW_INIT_STEP2_DATA) { - memcpy(pfirmware->firmware_buf, mapped_file, file_length); - pfirmware->firmware_buf_size = file_length; - } - break; - - default: - break; - } - - - }else if(rst_opt == OPT_FIRMWARE_RESET ) { - /* we only need to download data.img here */ - mapped_file = pfirmware->firmware_buf; - file_length = pfirmware->firmware_buf_size; - } - - /* Download image file */ - /* The firmware download process is just as following, - * 1. that is each packet will be segmented and inserted to the wait queue. - * 2. each packet segment will be put in the skb_buff packet. - * 3. each skb_buff packet data content will already include the firmware info - * and Tx descriptor info - * */ - rt_status = fw_download_code(dev,mapped_file,file_length); - - if(rst_opt == OPT_SYSTEM_RESET) { - release_firmware(fw_entry); - } - - if(rt_status != TRUE) { - goto download_firmware_fail; - } - - switch(init_step) { - case FW_INIT_STEP0_BOOT: - /* Download boot - * initialize command descriptor. - * will set polling bit when firmware code is also configured - */ - pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE; -#ifdef RTL8190P - // To initialize IMEM, CPU move code from 0x80000080, hence, we send 0x80 byte packet - rt_status = fwSendNullPacket(dev, RTL8190_CPU_START_OFFSET); - if(rt_status != true) - { - RT_TRACE(COMP_INIT, "fwSendNullPacket() fail ! \n"); - goto download_firmware_fail; - } -#endif - //mdelay(1000); - /* - * To initialize IMEM, CPU move code from 0x80000080, - * hence, we send 0x80 byte packet - */ - break; - - case FW_INIT_STEP1_MAIN: - /* Download firmware code. Wait until Boot Ready and Turn on CPU */ - pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE; - - /* Check Put Code OK and Turn On CPU */ - rt_status = CPUcheck_maincodeok_turnonCPU(dev); - if(rt_status != TRUE) { - RT_TRACE(COMP_ERR, "CPUcheck_maincodeok_turnonCPU fail!\n"); - goto download_firmware_fail; - } - - pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU; - break; - - case FW_INIT_STEP2_DATA: - /* download initial data code */ - pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE; - mdelay(1); - - rt_status = CPUcheck_firmware_ready(dev); - if(rt_status != TRUE) { - RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n",rt_status); - goto download_firmware_fail; - } - - /* wait until data code is initialized ready.*/ - pfirmware->firmware_status = FW_STATUS_5_READY; - break; - } - } - - RT_TRACE(COMP_FIRMWARE, "Firmware Download Success\n"); - //assert(pfirmware->firmware_status == FW_STATUS_5_READY, ("Firmware Download Fail\n")); - - return rt_status; - -download_firmware_fail: - RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__); - rt_status = FALSE; - return rt_status; - -} -#endif diff --git a/drivers/staging/rtl8192su/r8192S_hw.h b/drivers/staging/rtl8192su/r8192S_hw.h index 47406cab49a..6634e01a5c2 100644 --- a/drivers/staging/rtl8192su/r8192S_hw.h +++ b/drivers/staging/rtl8192su/r8192S_hw.h @@ -49,10 +49,8 @@ typedef enum _RT_RF_TYPE_DEFINITION RF_1T2R = 0, RF_2T4R, RF_2T2R, -#ifdef RTL8192SU RF_1T1R, RF_2T2R_GREEN, -#endif //RF_3T3R, //RF_3T4R, //RF_4T4R, diff --git a/drivers/staging/rtl8192su/r8192S_phy.c b/drivers/staging/rtl8192su/r8192S_phy.c index 96894c402f3..5e636d1e0ed 100644 --- a/drivers/staging/rtl8192su/r8192S_phy.c +++ b/drivers/staging/rtl8192su/r8192S_phy.c @@ -35,17 +35,11 @@ #include "r8192U_dm.h" #include "r8192S_rtl6052.h" -#ifdef RTL8192SU #include "r8192S_hw.h" #include "r8192S_phy.h" #include "r8192S_phyreg.h" #include "r8192SU_HWImg.h" //#include "r8192S_FwImgDTM.h" -#else -#include "r8192U_hw.h" -#include "r819xU_phy.h" -#include "r819xU_phyreg.h" -#endif #include "ieee80211/dot11d.h" @@ -58,26 +52,6 @@ /*------------------------Define local variable------------------------------*/ // 2004-05-11 -#ifndef RTL8192SU -static u32 RF_CHANNEL_TABLE_ZEBRA[]={ - 0, - 0x085c,//2412 1 - 0x08dc,//2417 2 - 0x095c,//2422 3 - 0x09dc,//2427 4 - 0x0a5c,//2432 5 - 0x0adc,//2437 6 - 0x0b5c,//2442 7 - 0x0bdc,//2447 8 - 0x0c5c,//2452 9 - 0x0cdc,//2457 10 - 0x0d5c,//2462 11 - 0x0ddc,//2467 12 - 0x0e5c,//2472 13 - //0x0f5c,//2484 - 0x0f72,//2484 //20040810 -}; -#endif static u32 phy_CalculateBitShift(u32 BitMask); @@ -114,7 +88,6 @@ static u8 phy_DbmToTxPwrIdx( struct net_device* dev, WIRELESS_MODE WirelessMode, void phy_SetFwCmdIOCallback(struct net_device* dev); //#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE)) -#ifdef RTL8192SU // // Description: // Base Band read by 4181 to make sure that operation could be done in unlimited cycle. @@ -382,7 +355,6 @@ void phy_SetUsbRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 RegAdd } -#endif /*---------------------Define local function prototype-----------------------*/ @@ -422,7 +394,6 @@ u32 rtl8192_QueryBBReg(struct net_device* dev, u32 RegAddr, u32 BitMask) // 2008.09.06. // //#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE)) -#ifdef RTL8192SU if(IS_BB_REG_OFFSET_92S(RegAddr)) { //if(RT_USB_CANNOT_IO(Adapter)) return FALSE; @@ -436,7 +407,6 @@ u32 rtl8192_QueryBBReg(struct net_device* dev, u32 RegAddr, u32 BitMask) OriginalValue = phy_QueryUsbBBReg(dev, RegAddr); } else -#endif { OriginalValue = read_nic_dword(dev, RegAddr); } @@ -482,7 +452,6 @@ void rtl8192_setBBreg(struct net_device* dev, u32 RegAddr, u32 BitMask, u32 Data // 2008.09.06. // //#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE)) -#ifdef RTL8192SU if(IS_BB_REG_OFFSET_92S(RegAddr)) { if((RegAddr & 0x03) != 0) @@ -501,7 +470,6 @@ void rtl8192_setBBreg(struct net_device* dev, u32 RegAddr, u32 BitMask, u32 Data phy_SetUsbBBReg(dev, RegAddr, Data); } else -#endif { if(BitMask!= bMaskDWord) {//if not "double word" write @@ -571,19 +539,8 @@ u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u3 // 2008.09.06. // //#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE) -#ifdef RTL8192SU //if(RT_USB_CANNOT_IO(Adapter)) return FALSE; Original_Value = phy_QueryUsbRFReg(dev, eRFPath, RegAddr); -#else - if (priv->Rf_Mode == RF_OP_By_FW) - { - Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); - } - else - { - Original_Value = phy_RFSerialRead(dev, eRFPath, RegAddr); - } -#endif BitShift = phy_CalculateBitShift(BitMask); Readback_Value = (Original_Value & BitMask) >> BitShift; @@ -647,7 +604,6 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 // 2008.09.06. // //#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE) -#ifdef RTL8192SU //if(RT_USB_CANNOT_IO(Adapter)) return; if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only @@ -659,37 +615,6 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 } else phy_SetUsbRFReg(dev, eRFPath, RegAddr, Data); -#else - if (priv->Rf_Mode == RF_OP_By_FW) - { - //DbgPrint("eRFPath-%d Addr[%02x] = %08x\n", eRFPath, RegAddr, Data); - if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only - { - Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); - BitShift = phy_CalculateBitShift(BitMask); - New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift)); - - phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value); - } - else - phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data); - } - else - { - //DbgPrint("eRFPath-%d Addr[%02x] = %08x\n", eRFPath, RegAddr, Data); - if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only - { - Original_Value = phy_RFSerialRead(dev, eRFPath, RegAddr); - BitShift = phy_CalculateBitShift(BitMask); - New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift)); - - phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value); - } - else - phy_RFSerialWrite(dev, eRFPath, RegAddr, Data); - - } -#endif //PlatformReleaseSpinLock(dev, RT_RF_OPERATE_SPINLOCK); //spin_unlock_irqrestore(&priv->rf_lock, flags); //YJ,test,090113 up(&priv->rf_sem); @@ -1477,11 +1402,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E if(Rtl819XRadioA_Array_Table[i] == 0xfe) { // Deay specific ms. Only RF configuration require delay. //#if (DEV_BUS_TYPE == USB_INTERFACE) -#ifdef RTL8192SU mdelay(1000); -#else - mdelay(50); -#endif } else if (Rtl819XRadioA_Array_Table[i] == 0xfd) mdelay(5); @@ -1505,11 +1426,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E if(Rtl819XRadioB_Array_Table[i] == 0xfe) { // Deay specific ms. Only RF configuration require delay. //#if (DEV_BUS_TYPE == USB_INTERFACE) -#ifdef RTL8192SU mdelay(1000); -#else - mdelay(50); -#endif } else if (Rtl819XRadioB_Array_Table[i] == 0xfd) mdelay(5); @@ -2969,9 +2886,7 @@ void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EX #endif if((priv->up) )// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower) ) { -#if defined(RTL8192SU) SetBWModeCallback8192SUsbWorkItem(dev); -#endif } else { @@ -3086,9 +3001,7 @@ u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel) if((priv->up))// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower)) { -#if defined(RTL8192SU) SwChnlCallback8192SUsbWorkItem(dev); -#endif #ifdef TO_DO_LIST if(bResult) { @@ -3339,13 +3252,9 @@ phy_SwChnlStepByStep( case CmdID_RF_WriteReg: // Only modify channel for the register now !!!!! for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++) { -#if defined RTL8192SU // For new T65 RF 0222d register 0x18 bit 0-9 = channel number. rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f, (CurrentCmd->Para2)); //printk("====>%x, %x, read_back:%x\n", CurrentCmd->Para2,CurrentCmd->Para1, rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f)); -#else - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bRFRegOffsetMask, ((CurrentCmd->Para2)<<7)); -#endif } break; default: @@ -3813,7 +3722,6 @@ extern void PHY_IQCalibrateBcut(struct net_device* dev) // //-------------------------Move to other DIR later----------------------------*/ //#if (DEV_BUS_TYPE == USB_INTERFACE) -#ifdef RTL8192SU // use in phy only (in win it's timer) void SwChnlCallback8192SUsb(struct net_device *dev) @@ -4190,7 +4098,6 @@ void SetBWModeCallback8192SUsbWorkItem(struct net_device *dev) } //--------------------------Move to oter DIR later-------------------------------*/ -#ifdef RTL8192SU void InitialGain8192S(struct net_device *dev, u8 Operation) { #ifdef TO_DO_LIST @@ -4198,7 +4105,6 @@ void InitialGain8192S(struct net_device *dev, u8 Operation) #endif } -#endif void InitialGain819xUsb(struct net_device *dev, u8 Operation) { @@ -4284,7 +4190,6 @@ extern void InitialGainOperateWorkItemCallBack(struct work_struct *work) } } -#endif // #if (DEV_BUS_TYPE == USB_INTERFACE) //----------------------------------------------------------------------------- // Description: diff --git a/drivers/staging/rtl8192su/r8192S_rtl6052.c b/drivers/staging/rtl8192su/r8192S_rtl6052.c index 18faa6d0f02..322f9a4bac5 100644 --- a/drivers/staging/rtl8192su/r8192S_rtl6052.c +++ b/drivers/staging/rtl8192su/r8192S_rtl6052.c @@ -23,15 +23,9 @@ #include "r8192U.h" #include "r8192S_rtl6052.h" -#ifdef RTL8192SU #include "r8192S_hw.h" #include "r8192S_phyreg.h" #include "r8192S_phy.h" -#else -#include "r8192U_hw.h" -#include "r819xU_phyreg.h" -#include "r819xU_phy.h" -#endif /*---------------------------Define Local Constant---------------------------*/ @@ -162,7 +156,6 @@ void PHY_RF6052SetBandwidth(struct net_device* dev, HT_CHANNEL_WIDTH Bandwidth) //if (priv->card_8192 == NIC_8192SE) -#ifdef RTL8192SU //YJ,test,090113 { switch(Bandwidth) { @@ -184,26 +177,6 @@ void PHY_RF6052SetBandwidth(struct net_device* dev, HT_CHANNEL_WIDTH Bandwidth) } } // else -#else - { - for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++) - { - switch(Bandwidth) - { - case HT_CHANNEL_WIDTH_20: - //PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, (BIT10|BIT11), 0x01); - break; - case HT_CHANNEL_WIDTH_20_40: - //PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, (BIT10|BIT11), 0x00); - break; - default: - RT_TRACE(COMP_DBG, "PHY_SetRF8225Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth ); - break; - - } - } - } -#endif } diff --git a/drivers/staging/rtl8192su/r8192U.h b/drivers/staging/rtl8192su/r8192U.h index ff6af9ba3cd..79e58650a00 100644 --- a/drivers/staging/rtl8192su/r8192U.h +++ b/drivers/staging/rtl8192su/r8192U.h @@ -42,11 +42,7 @@ #include "ieee80211/ieee80211.h" -#ifdef RTL8192SU #include "r8192S_firmware.h" -#else -#include "r819xU_firmware.h" -#endif //#define RTL8192U #define RTL819xU_MODULE_NAME "rtl819xU" @@ -305,7 +301,6 @@ do { if(rt_global_debug_component & component) \ #define OFDM_Table_Length 19 #define CCK_Table_length 12 -#ifdef RTL8192SU // //Tx Descriptor for RLT8192SU(Normal mode) // @@ -423,51 +418,9 @@ typedef struct _tx_status_desc_8192s_usb{ u8 RxAGC3; u8 RxAGC4; }tx_status_desc_8192s_usb, *ptx_status_desc_8192s_usb; -#else -/* for rtl819x */ -typedef struct _tx_desc_819x_usb { - //DWORD 0 - u16 PktSize; - u8 Offset; - u8 Reserved0:3; - u8 CmdInit:1; - u8 LastSeg:1; - u8 FirstSeg:1; - u8 LINIP:1; - u8 OWN:1; - - //DWORD 1 - u8 TxFWInfoSize; - u8 RATid:3; - u8 DISFB:1; - u8 USERATE:1; - u8 MOREFRAG:1; - u8 NoEnc:1; - u8 PIFS:1; - u8 QueueSelect:5; - u8 NoACM:1; - u8 Reserved1:2; - u8 SecCAMID:5; - u8 SecDescAssign:1; - u8 SecType:2; - - //DWORD 2 - u16 TxBufferSize; - //u16 Reserved2; - u8 ResvForPaddingLen:7; - u8 Reserved3:1; - u8 Reserved4; - - //DWORD 3, 4, 5 - u32 Reserved5; - u32 Reserved6; - u32 Reserved7; -}tx_desc_819x_usb, *ptx_desc_819x_usb; -#endif -#ifdef RTL8192SU // //Tx Descriptor for RLT8192SU(Load FW mode) // @@ -532,39 +485,7 @@ typedef struct _tx_h2c_cmd_hdr_8192s_usb{ // DWORD 1 u32 Rsvd0; }tx_h2c_cmd_hdr_8192s_usb, *ptx_h2c_cmd_hdr_8192s_usb; -#else -typedef struct _tx_desc_cmd_819x_usb { - //DWORD 0 - u16 Reserved0; - u8 Reserved1; - u8 Reserved2:3; - u8 CmdInit:1; - u8 LastSeg:1; - u8 FirstSeg:1; - u8 LINIP:1; - u8 OWN:1; - - //DOWRD 1 - //u32 Reserved3; - u8 TxFWInfoSize; - u8 Reserved3; - u8 QueueSelect; - u8 Reserved4; - - //DOWRD 2 - u16 TxBufferSize; - u16 Reserved5; - - //DWORD 3,4,5 - //u32 TxBufferAddr; - //u32 NextDescAddress; - u32 Reserved6; - u32 Reserved7; - u32 Reserved8; -}tx_desc_cmd_819x_usb, *ptx_desc_cmd_819x_usb; -#endif -#ifdef RTL8192SU typedef struct _tx_fwinfo_819x_usb{ //DWORD 0 u8 TxRate:7; @@ -593,38 +514,6 @@ typedef struct _tx_fwinfo_819x_usb{ u32 Tx_INFO_RSVD:6; u32 PacketID:13; }tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb; -#else -typedef struct _tx_fwinfo_819x_usb { - //DOWRD 0 - u8 TxRate:7; - u8 CtsEnable:1; - u8 RtsRate:7; - u8 RtsEnable:1; - u8 TxHT:1; - u8 Short:1; //Short PLCP for CCK, or short GI for 11n MCS - u8 TxBandwidth:1; // This is used for HT MCS rate only. - u8 TxSubCarrier:2; // This is used for legacy OFDM rate only. - u8 STBC:2; - u8 AllowAggregation:1; - u8 RtsHT:1; //Interpre RtsRate field as high throughput data rate - u8 RtsShort:1; //Short PLCP for CCK, or short GI for 11n MCS - u8 RtsBandwidth:1; // This is used for HT MCS rate only. - u8 RtsSubcarrier:2; // This is used for legacy OFDM rate only. - u8 RtsSTBC:2; - u8 EnableCPUDur:1; //Enable firmware to recalculate and assign packet duration - - //DWORD 1 - u32 RxMF:2; - u32 RxAMD:3; - u32 TxPerPktInfoFeedback:1;//1 indicate Tx info gathtered by firmware and returned by Rx Cmd - u32 Reserved1:2; - u32 TxAGCOffSet:4; - u32 TxAGCSign:1; - u32 Tx_INFO_RSVD:6; - u32 PacketID:13; - //u32 Reserved; -}tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb; -#endif typedef struct rtl8192_rx_info { struct urb *urb; @@ -632,7 +521,6 @@ typedef struct rtl8192_rx_info { u8 out_pipe; }rtl8192_rx_info ; -#ifdef RTL8192SU //typedef struct _RX_DESC_STATUS_8192SU{ typedef struct rx_desc_819x_usb{ //DWORD 0 @@ -695,36 +583,8 @@ typedef struct rx_desc_819x_usb{ u32 TSFL; //}RX_DESC_STATUS_8192SU, *PRX_DESC_STATUS_8192SU; }rx_desc_819x_usb, *prx_desc_819x_usb; -#else -typedef struct rx_desc_819x_usb{ - //DOWRD 0 - u16 Length:14; - u16 CRC32:1; - u16 ICV:1; - u8 RxDrvInfoSize; - u8 Shift:2; - u8 PHYStatus:1; - u8 SWDec:1; - //u8 LastSeg:1; - //u8 FirstSeg:1; - //u8 EOR:1; - //u8 OWN:1; - u8 Reserved1:4; - - //DWORD 1 - u32 Reserved2; - - //DWORD 2 - //u32 Reserved3; - - //DWORD 3 - //u32 BufferAddress; - -}rx_desc_819x_usb, *prx_desc_819x_usb; -#endif -#ifdef RTL8192SU // // Driver info are written to the begining of the RxBuffer // @@ -800,41 +660,11 @@ typedef struct rx_drvinfo_819x_usb{ u8 reserve:4; }rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb; -#else -typedef struct rx_drvinfo_819x_usb{ - //DWORD 0 - u16 Reserved1:12; - u16 PartAggr:1; - u16 FirstAGGR:1; - u16 Reserved2:2; - - u8 RxRate:7; - u8 RxHT:1; - - u8 BW:1; - u8 SPLCP:1; - u8 Reserved3:2; - u8 PAM:1; - u8 Mcast:1; - u8 Bcast:1; - u8 Reserved4:1; - - //DWORD 1 - u32 TSFL; - -}rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb; -#endif #define HWSET_MAX_SIZE_92S 128 -#ifdef RTL8192SU #define MAX_802_11_HEADER_LENGTH 40 #define MAX_PKT_AGG_NUM 256 #define TX_PACKET_SHIFT_BYTES USB_HWDESC_HEADER_LEN -#else - #define MAX_802_11_HEADER_LENGTH (40 + MAX_FIRMWARE_INFORMATION_SIZE) - #define MAX_PKT_AGG_NUM 64 - #define TX_PACKET_SHIFT_BYTES (USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb)) -#endif #define MAX_DEV_ADDR_SIZE 8 /* support till 64 bit bus width OS */ #define MAX_FIRMWARE_INFORMATION_SIZE 32 /*2006/04/30 by Emily forRTL8190*/ @@ -908,7 +738,6 @@ typedef struct _rt_firmare_seg_container { u8 *seg_ptr; }fw_seg_container, *pfw_seg_container; -#ifdef RTL8192SU //-------------------------------------------------------------------------------- // 8192S Firmware related //-------------------------------------------------------------------------------- @@ -1006,16 +835,6 @@ typedef struct _rt_firmware{ //u16 firmware_buf_size;//in 92u temp FIXLZM }rt_firmware, *prt_firmware; -#else -typedef struct _rt_firmware{ - firmware_status_e firmware_status; - u16 cmdpacket_frag_thresold; -#define RTL8190_MAX_FIRMWARE_CODE_SIZE 64000 //64k -#define MAX_FW_INIT_STEP 3 - u8 firmware_buf[MAX_FW_INIT_STEP][RTL8190_MAX_FIRMWARE_CODE_SIZE]; - u16 firmware_buf_size[MAX_FW_INIT_STEP]; -}rt_firmware, *prt_firmware; -#endif typedef struct _rt_firmware_info_819xUsb{ u8 sz_info[16]; }rt_firmware_info_819xUsb, *prt_firmware_info_819xUsb; @@ -1659,11 +1478,7 @@ typedef struct r8192_priv /*PHY related*/ BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D // Read/write are allow for following hardware information variables -#ifdef RTL8192SU u32 MCSTxPowerLevelOriginalOffset[7];//FIXLZM -#else - u32 MCSTxPowerLevelOriginalOffset[6]; -#endif u32 CCKTxPowerLevelOriginalOffset; u8 TxPowerLevelCCK[14]; // CCK channel 1~14 u8 TxPowerLevelOFDM24G[14]; // OFDM 2.4G channel 1~14 @@ -1945,14 +1760,9 @@ struct ssid_thread { }; #endif -#ifdef RTL8192SU short rtl8192SU_tx_cmd(struct net_device *dev, struct sk_buff *skb); short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb); bool FirmwareDownload92S(struct net_device *dev); -#else -short rtl8192_tx(struct net_device *dev, struct sk_buff* skb); -bool init_firmware(struct net_device *dev); -#endif short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb); short rtl8192_tx(struct net_device *dev, struct sk_buff* skb); diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c index e8b0714c72a..ede73d1f05e 100644 --- a/drivers/staging/rtl8192su/r8192U_core.c +++ b/drivers/staging/rtl8192su/r8192U_core.c @@ -58,7 +58,6 @@ double __extendsfdf2(float a) {return a;} #define CONFIG_RTL8192_IO_MAP -#ifdef RTL8192SU #include <asm/uaccess.h> #include "r8192U.h" //#include "r8190_rtl8256.h" /* RTL8225 Radio frontend */ @@ -80,29 +79,8 @@ double __extendsfdf2(float a) {return a;} #include "ieee80211/dot11d.h" -#else -#include <asm/uaccess.h> -#include "r8192U_hw.h" -#include "r8192U.h" -#include "r8190_rtl8256.h" /* RTL8225 Radio frontend */ -#include "r8180_93cx6.h" /* Card EEPROM */ -#include "r8192U_wx.h" -#include "r819xU_phy.h" //added by WB 4.30.2008 -#include "r819xU_phyreg.h" -#include "r819xU_cmdpkt.h" -#include "r8192U_dm.h" -//#include "r8192xU_phyreg.h" -#include <linux/usb.h> -#include "r8192U_pm.h" - -#include "ieee80211/dot11d.h" - -#endif - - -#ifdef RTL8192SU u32 rt_global_debug_component = \ // COMP_TRACE | // COMP_DBG | @@ -136,29 +114,6 @@ u32 rt_global_debug_component = \ COMP_DOWN | COMP_RESET | COMP_ERR; //always open err flags on -#else -//set here to open your trace code. //WB -u32 rt_global_debug_component = \ - // COMP_INIT | -// COMP_DBG | - // COMP_EPROM | -// COMP_PHY | - // COMP_RF | -// COMP_FIRMWARE | -// COMP_CH | - // COMP_POWER_TRACKING | -// COMP_RATE | - // COMP_TXAGC | - // COMP_TRACE | - COMP_DOWN | - // COMP_RECV | - // COMP_SWBW | - COMP_SEC | - // COMP_RESET | - // COMP_SEND | - // COMP_EVENTS | - COMP_ERR ; //always open err flags on -#endif #define TOTAL_CAM_ENTRY 32 #define CAM_CONTENT_COUNT 8 @@ -224,7 +179,6 @@ static struct usb_driver rtl8192_usb_driver = { }; -#ifdef RTL8192SU static void rtl8192SU_read_eeprom_info(struct net_device *dev); short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb); void rtl8192SU_rx_nomal(struct sk_buff* skb); @@ -247,30 +201,6 @@ struct rtl819x_ops rtl8192su_ops = { .rtl819x_initial_gain = InitialGain8192S, .rtl819x_query_rxdesc_status = rtl8192SU_query_rxdesc_status, }; -#else -static void rtl8192_read_eeprom_info(struct net_device *dev); -short rtl8192_tx(struct net_device *dev, struct sk_buff* skb); -void rtl8192_rx_nomal(struct sk_buff* skb); -void rtl8192_rx_cmd(struct sk_buff *skb); -bool rtl8192_adapter_start(struct net_device *dev); -short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb); -void rtl8192_link_change(struct net_device *dev); -void InitialGain819xUsb(struct net_device *dev,u8 Operation); -void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe); - -struct rtl819x_ops rtl8192u_ops = { - .nic_type = NIC_8192U, - .rtl819x_read_eeprom_info = rtl8192_read_eeprom_info, - .rtl819x_tx = rtl8192_tx, - .rtl819x_tx_cmd = rtl819xU_tx_cmd, - .rtl819x_rx_nomal = rtl8192_rx_nomal, - .rtl819x_rx_cmd = rtl8192_rx_cmd, - .rtl819x_adapter_start = rtl8192_adapter_start, - .rtl819x_link_change = rtl8192_link_change, - .rtl819x_initial_gain = InitialGain819xUsb, - .rtl819x_query_rxdesc_status = query_rxdesc_status, -}; -#endif typedef struct _CHANNEL_LIST @@ -350,7 +280,6 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv) #define eqMacAddr(a,b) ( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 ) -#ifdef RTL8192SU #define rx_hal_is_cck_rate(_pDesc)\ ((_pDesc->RxMCS == DESC92S_RATE1M ||\ _pDesc->RxMCS == DESC92S_RATE2M ||\ @@ -364,14 +293,6 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv) _DataRate == MGN_5_5M ||\ _DataRate == MGN_11M ) -#else -#define rx_hal_is_cck_rate(_pdrvinfo)\ - ((_pdrvinfo->RxRate == DESC90_RATE1M ||\ - _pdrvinfo->RxRate == DESC90_RATE2M ||\ - _pdrvinfo->RxRate == DESC90_RATE5_5M ||\ - _pdrvinfo->RxRate == DESC90_RATE11M) &&\ - !_pdrvinfo->RxHT) -#endif @@ -456,11 +377,7 @@ void write_nic_byte(struct net_device *dev, int indx, u8 data) status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE, -#ifdef RTL8192SU indx, 0, &data, 1, HZ / 2); -#else - (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 1, HZ / 2); -#endif if (status < 0) { @@ -481,11 +398,7 @@ void write_nic_word(struct net_device *dev, int indx, u16 data) status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE, -#ifdef RTL8192SU indx, 0, &data, 2, HZ / 2); -#else - (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 2, HZ / 2); -#endif if (status < 0) { @@ -505,11 +418,7 @@ void write_nic_dword(struct net_device *dev, int indx, u32 data) status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE, -#ifdef RTL8192SU indx, 0, &data, 4, HZ / 2); -#else - (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 4, HZ / 2); -#endif if (status < 0) @@ -530,11 +439,7 @@ u8 read_nic_byte(struct net_device *dev, int indx) status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, -#ifdef RTL8192SU indx, 0, &data, 1, HZ / 2); -#else - (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 1, HZ / 2); -#endif if (status < 0) { @@ -555,11 +460,7 @@ u16 read_nic_word(struct net_device *dev, int indx) status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, -#ifdef RTL8192SU indx, 0, &data, 2, HZ / 2); -#else - (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 2, HZ / 2); -#endif if (status < 0) { @@ -601,11 +502,7 @@ u32 read_nic_dword(struct net_device *dev, int indx) status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, -#ifdef RTL8192SU indx, 0, &data, 4, HZ / 2); -#else - (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 4, HZ / 2); -#endif // if(0 != result) { // printk(KERN_WARNING "read size of data = %d\, date = %d\n", result, data); // } @@ -681,7 +578,6 @@ static int proc_get_stats_ap(char *page, char **start, return len; } -#ifdef RTL8192SU static int proc_get_registers(char *page, char **start, off_t offset, int count, int *eof, void *data) @@ -972,73 +868,6 @@ static int proc_get_registers_e(char *page, char **start, *eof = 1; return len; } -#else -static int proc_get_registers(char *page, char **start, - off_t offset, int count, - int *eof, void *data) -{ - struct net_device *dev = data; -// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); - - int len = 0; - int i,n; - - int max=0xff; - - /* This dump the current register page */ -len += snprintf(page + len, count - len, - "\n####################page 0##################\n "); - - for(n=0;n<=max;) - { - //printk( "\nD: %2x> ", n); - len += snprintf(page + len, count - len, - "\nD: %2x > ",n); - - for(i=0;i<16 && n<=max;i++,n++) - len += snprintf(page + len, count - len, - "%2x ",read_nic_byte(dev,0x000|n)); - - // printk("%2x ",read_nic_byte(dev,n)); - } -#if 1 -len += snprintf(page + len, count - len, - "\n####################page 1##################\n "); - for(n=0;n<=max;) - { - //printk( "\nD: %2x> ", n); - len += snprintf(page + len, count - len, - "\nD: %2x > ",n); - - for(i=0;i<16 && n<=max;i++,n++) - len += snprintf(page + len, count - len, - "%2x ",read_nic_byte(dev,0x100|n)); - - // printk("%2x ",read_nic_byte(dev,n)); - } -len += snprintf(page + len, count - len, - "\n####################page 3##################\n "); - for(n=0;n<=max;) - { - //printk( "\nD: %2x> ", n); - len += snprintf(page + len, count - len, - "\nD: %2x > ",n); - - for(i=0;i<16 && n<=max;i++,n++) - len += snprintf(page + len, count - len, - "%2x ",read_nic_byte(dev,0x300|n)); - - // printk("%2x ",read_nic_byte(dev,n)); - } - -#endif - - len += snprintf(page + len, count - len,"\n"); - *eof = 1; - return len; - -} -#endif #if 0 static int proc_get_cck_reg(char *page, char **start, @@ -1341,7 +1170,6 @@ void rtl8192_proc_init_one(struct net_device *dev) "/proc/net/rtl8192/%s/registers\n", dev->name); } -#ifdef RTL8192SU e = create_proc_read_entry("registers-1", S_IFREG | S_IRUGO, priv->dir_dev, proc_get_registers_1, dev); if (!e) { @@ -1405,7 +1233,6 @@ void rtl8192_proc_init_one(struct net_device *dev) "/proc/net/rtl8192/%s/registers-e\n", dev->name); } -#endif #if 0 e = create_proc_read_entry("cck-registers", S_IFREG | S_IRUGO, priv->dir_dev, proc_get_cck_reg, dev); @@ -2347,7 +2174,6 @@ void rtl8192_update_cap(struct net_device* dev, u16 cap) priv->short_preamble = cap & WLAN_CAPABILITY_SHORT_PREAMBLE; //LZM MOD 090303 HW_VAR_ACK_PREAMBLE -#ifdef RTL8192SU if(0) { u8 tmp = 0; @@ -2356,15 +2182,6 @@ void rtl8192_update_cap(struct net_device* dev, u16 cap) tmp |= 0x80; write_nic_byte(dev, RRSR+2, tmp); } -#else - { - u32 tmp = 0; - tmp = priv->basic_rate; - if (priv->short_preamble) - tmp |= BRSR_AckShortPmb; - write_nic_dword(dev, RRSR, tmp); - } -#endif if (net->mode & (IEEE_G|IEEE_N_24G)) { @@ -2593,7 +2410,6 @@ unsigned int txqueue2outpipe(struct r8192_priv* priv,unsigned int tx_queue) { return priv->txqueue_to_outpipemap[tx_queue]; } -#ifdef RTL8192SU short rtl8192SU_tx_cmd(struct net_device *dev, struct sk_buff *skb) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -2653,62 +2469,6 @@ short rtl8192SU_tx_cmd(struct net_device *dev, struct sk_buff *skb) return -1; } } -#else -short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - //u8 *tx; - int status; - struct urb *tx_urb; - //int urb_buf_len; - unsigned int idx_pipe; - tx_desc_cmd_819x_usb *pdesc = (tx_desc_cmd_819x_usb *)skb->data; - cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE); - u8 queue_index = tcb_desc->queue_index; - - //printk("\n %s::queue_index = %d\n",__FUNCTION__, queue_index); - atomic_inc(&priv->tx_pending[queue_index]); - - tx_urb = usb_alloc_urb(0,GFP_ATOMIC); - if(!tx_urb){ - dev_kfree_skb(skb); - return -ENOMEM; - } - - memset(pdesc, 0, USB_HWDESC_HEADER_LEN); - /* Tx descriptor ought to be set according to the skb->cb */ - pdesc->FirstSeg = 1;//bFirstSeg; - pdesc->LastSeg = 1;//bLastSeg; - pdesc->CmdInit = tcb_desc->bCmdOrInit; - pdesc->TxBufferSize = tcb_desc->txbuf_size; - pdesc->OWN = 1; - pdesc->LINIP = tcb_desc->bLastIniPkt; - - //---------------------------------------------------------------------------- - // Fill up USB_OUT_CONTEXT. - //---------------------------------------------------------------------------- - // Get index to out pipe from specified QueueID. - idx_pipe = txqueue2outpipe(priv,queue_index); -#ifdef JOHN_DUMP_TXDESC - int i; - printk("<Tx descriptor>--rate %x---",rate); - for (i = 0; i < 8; i++) - printk("%8x ", tx[i]); - printk("\n"); -#endif - usb_fill_bulk_urb(tx_urb,priv->udev, usb_sndbulkpipe(priv->udev,idx_pipe), \ - skb->data, skb->len, rtl8192_tx_isr, skb); - - status = usb_submit_urb(tx_urb, GFP_ATOMIC); - if (!status){ - return 0; - }else{ - DMESGE("Error TX CMD URB, error %d", - status); - return -1; - } -} -#endif /* * Mapping Software/Hardware descriptor queue id to "Queue Select Field" @@ -2763,7 +2523,6 @@ u8 MapHwQueueToFirmwareQueue(u8 QueueID) return QueueSelect; } -#ifdef RTL8192SU u8 MRateToHwRate8190Pci(u8 rate) { u8 ret = DESC92S_RATE1M; @@ -2828,49 +2587,6 @@ u8 MRateToHwRate8190Pci(u8 rate) } return ret; } -#else -u8 MRateToHwRate8190Pci(u8 rate) -{ - u8 ret = DESC90_RATE1M; - - switch(rate) { - case MGN_1M: ret = DESC90_RATE1M; break; - case MGN_2M: ret = DESC90_RATE2M; break; - case MGN_5_5M: ret = DESC90_RATE5_5M; break; - case MGN_11M: ret = DESC90_RATE11M; break; - case MGN_6M: ret = DESC90_RATE6M; break; - case MGN_9M: ret = DESC90_RATE9M; break; - case MGN_12M: ret = DESC90_RATE12M; break; - case MGN_18M: ret = DESC90_RATE18M; break; - case MGN_24M: ret = DESC90_RATE24M; break; - case MGN_36M: ret = DESC90_RATE36M; break; - case MGN_48M: ret = DESC90_RATE48M; break; - case MGN_54M: ret = DESC90_RATE54M; break; - - // HT rate since here - case MGN_MCS0: ret = DESC90_RATEMCS0; break; - case MGN_MCS1: ret = DESC90_RATEMCS1; break; - case MGN_MCS2: ret = DESC90_RATEMCS2; break; - case MGN_MCS3: ret = DESC90_RATEMCS3; break; - case MGN_MCS4: ret = DESC90_RATEMCS4; break; - case MGN_MCS5: ret = DESC90_RATEMCS5; break; - case MGN_MCS6: ret = DESC90_RATEMCS6; break; - case MGN_MCS7: ret = DESC90_RATEMCS7; break; - case MGN_MCS8: ret = DESC90_RATEMCS8; break; - case MGN_MCS9: ret = DESC90_RATEMCS9; break; - case MGN_MCS10: ret = DESC90_RATEMCS10; break; - case MGN_MCS11: ret = DESC90_RATEMCS11; break; - case MGN_MCS12: ret = DESC90_RATEMCS12; break; - case MGN_MCS13: ret = DESC90_RATEMCS13; break; - case MGN_MCS14: ret = DESC90_RATEMCS14; break; - case MGN_MCS15: ret = DESC90_RATEMCS15; break; - case (0x80|0x20): ret = DESC90_RATEMCS32; break; - - default: break; - } - return ret; -} -#endif u8 QueryIsShort(u8 TxHT, u8 TxRate, cb_desc *tcb_desc) { @@ -2890,7 +2606,6 @@ static void tx_zero_isr(struct urb *tx_urb) } -#ifdef RTL8192SU /* * The tx procedure is just as following, skb->cb will contain all the following *information: * priority, morefrag, rate, &dev. @@ -3224,269 +2939,6 @@ short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb) return -1; } } -#else - -/* - * The tx procedure is just as following, - * skb->cb will contain all the following information, - * priority, morefrag, rate, &dev. - * */ -short rtl8192_tx(struct net_device *dev, struct sk_buff* skb) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE); - tx_desc_819x_usb *tx_desc = (tx_desc_819x_usb *)skb->data; - tx_fwinfo_819x_usb *tx_fwinfo = (tx_fwinfo_819x_usb *)(skb->data + USB_HWDESC_HEADER_LEN); - struct usb_device *udev = priv->udev; - int pend; - int status; - struct urb *tx_urb = NULL, *tx_urb_zero = NULL; - //int urb_len; - unsigned int idx_pipe; -// RT_DEBUG_DATA(COMP_SEND, tcb_desc, sizeof(cb_desc)); -#if 0 - /* Added by Annie for filling Len_Adjust field. 2005-12-14. */ - RT_ENC_ALG EncAlg = NO_Encryption; -#endif -// printk("=============> %s\n", __FUNCTION__); - pend = atomic_read(&priv->tx_pending[tcb_desc->queue_index]); - /* we are locked here so the two atomic_read and inc are executed - * without interleaves - * !!! For debug purpose - */ - if( pend > MAX_TX_URB){ -#if 0 - switch (tcb_desc->queue_index) { - case VO_PRIORITY: - priv->stats.txvodrop++; - break; - case VI_PRIORITY: - priv->stats.txvidrop++; - break; - case BE_PRIORITY: - priv->stats.txbedrop++; - break; - default://BK_PRIORITY - priv->stats.txbkdrop++; - break; - } -#endif - printk("To discard skb packet!\n"); - dev_kfree_skb_any(skb); - return -1; - } - - tx_urb = usb_alloc_urb(0,GFP_ATOMIC); - if(!tx_urb){ - dev_kfree_skb_any(skb); - return -ENOMEM; - } - - /* Fill Tx firmware info */ - memset(tx_fwinfo,0,sizeof(tx_fwinfo_819x_usb)); - /* DWORD 0 */ - tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80)?1:0; - tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate); - tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur; - tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc); - if(tcb_desc->bAMPDUEnable) {//AMPDU enabled - tx_fwinfo->AllowAggregation = 1; - /* DWORD 1 */ - tx_fwinfo->RxMF = tcb_desc->ampdu_factor; - tx_fwinfo->RxAMD = tcb_desc->ampdu_density&0x07;//ampdudensity - } else { - tx_fwinfo->AllowAggregation = 0; - /* DWORD 1 */ - tx_fwinfo->RxMF = 0; - tx_fwinfo->RxAMD = 0; - } - - /* Protection mode related */ - tx_fwinfo->RtsEnable = (tcb_desc->bRTSEnable)?1:0; - tx_fwinfo->CtsEnable = (tcb_desc->bCTSEnable)?1:0; - tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC)?1:0; - tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80)?1:0; - tx_fwinfo->RtsRate = MRateToHwRate8190Pci((u8)tcb_desc->rts_rate); - tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT==0)?(tcb_desc->RTSSC):0; - tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT==1)?((tcb_desc->bRTSBW)?1:0):0; - tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT==0)?(tcb_desc->bRTSUseShortPreamble?1:0):\ - (tcb_desc->bRTSUseShortGI?1:0); - - /* Set Bandwidth and sub-channel settings. */ - if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40) - { - if(tcb_desc->bPacketBW) { - tx_fwinfo->TxBandwidth = 1; - tx_fwinfo->TxSubCarrier = 0; //By SD3's Jerry suggestion, use duplicated mode - } else { - tx_fwinfo->TxBandwidth = 0; - tx_fwinfo->TxSubCarrier = priv->nCur40MhzPrimeSC; - } - } else { - tx_fwinfo->TxBandwidth = 0; - tx_fwinfo->TxSubCarrier = 0; - } - - /* Fill Tx descriptor */ - memset(tx_desc, 0, sizeof(tx_desc_819x_usb)); - /* DWORD 0 */ - tx_desc->LINIP = 0; - tx_desc->CmdInit = 1; - tx_desc->Offset = sizeof(tx_fwinfo_819x_usb) + 8; - - { - tx_desc->PktSize = (skb->len - TX_PACKET_SHIFT_BYTES) & 0xffff; - } - - /*DWORD 1*/ - tx_desc->SecCAMID= 0; - tx_desc->RATid = tcb_desc->RATRIndex; -#if 0 - /* Fill security related */ - if( pTcb->bEncrypt && !Adapter->MgntInfo.SecurityInfo.SWTxEncryptFlag) - { - EncAlg = SecGetEncryptionOverhead( - Adapter, - &EncryptionMPDUHeadOverhead, - &EncryptionMPDUTailOverhead, - NULL, - NULL, - FALSE, - FALSE); - //2004/07/22, kcwu, EncryptionMPDUHeadOverhead has been added in previous code - //MPDUOverhead = EncryptionMPDUHeadOverhead + EncryptionMPDUTailOverhead; - MPDUOverhead = EncryptionMPDUTailOverhead; - tx_desc->NoEnc = 0; - RT_TRACE(COMP_SEC, DBG_LOUD, ("******We in the loop SecCAMID is %d SecDescAssign is %d The Sec is %d********\n",tx_desc->SecCAMID,tx_desc->SecDescAssign,EncAlg)); - //CamDumpAll(Adapter); - } - else -#endif - { - //MPDUOverhead = 0; - tx_desc->NoEnc = 1; - } -#if 0 - switch(EncAlg){ - case NO_Encryption: - tx_desc->SecType = 0x0; - break; - case WEP40_Encryption: - case WEP104_Encryption: - tx_desc->SecType = 0x1; - break; - case TKIP_Encryption: - tx_desc->SecType = 0x2; - break; - case AESCCMP_Encryption: - tx_desc->SecType = 0x3; - break; - default: - tx_desc->SecType = 0x0; - break; - } -#else - tx_desc->SecType = 0x0; -#endif - if (tcb_desc->bHwSec) - { - switch (priv->ieee80211->pairwise_key_type) - { - case KEY_TYPE_WEP40: - case KEY_TYPE_WEP104: - tx_desc->SecType = 0x1; - tx_desc->NoEnc = 0; - break; - case KEY_TYPE_TKIP: - tx_desc->SecType = 0x2; - tx_desc->NoEnc = 0; - break; - case KEY_TYPE_CCMP: - tx_desc->SecType = 0x3; - tx_desc->NoEnc = 0; - break; - case KEY_TYPE_NA: - tx_desc->SecType = 0x0; - tx_desc->NoEnc = 1; - break; - } - } - - tx_desc->QueueSelect = MapHwQueueToFirmwareQueue(tcb_desc->queue_index); - tx_desc->TxFWInfoSize = sizeof(tx_fwinfo_819x_usb); - - tx_desc->DISFB = tcb_desc->bTxDisableRateFallBack; - tx_desc->USERATE = tcb_desc->bTxUseDriverAssingedRate; - - /* Fill fields that are required to be initialized in all of the descriptors */ - //DWORD 0 -#if 0 - tx_desc->FirstSeg = (tcb_desc->bFirstSeg)? 1:0; - tx_desc->LastSeg = (tcb_desc->bLastSeg)?1:0; -#else - tx_desc->FirstSeg = 1; - tx_desc->LastSeg = 1; -#endif - tx_desc->OWN = 1; - - { - //DWORD 2 - tx_desc->TxBufferSize = (u32)(skb->len - USB_HWDESC_HEADER_LEN); - } - /* Get index to out pipe from specified QueueID */ - idx_pipe = txqueue2outpipe(priv,tcb_desc->queue_index); - - //RT_DEBUG_DATA(COMP_SEND,tx_fwinfo,sizeof(tx_fwinfo_819x_usb)); - //RT_DEBUG_DATA(COMP_SEND,tx_desc,sizeof(tx_desc_819x_usb)); - - /* To submit bulk urb */ - usb_fill_bulk_urb(tx_urb,udev, - usb_sndbulkpipe(udev,idx_pipe), skb->data, - skb->len, rtl8192_tx_isr, skb); - - status = usb_submit_urb(tx_urb, GFP_ATOMIC); - if (!status){ -//we need to send 0 byte packet whenever 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has been transmitted. Otherwise, it will be halt to wait for another packet. WB. 2008.08.27 - bool bSend0Byte = false; - u8 zero = 0; - if(udev->speed == USB_SPEED_HIGH) - { - if (skb->len > 0 && skb->len % 512 == 0) - bSend0Byte = true; - } - else - { - if (skb->len > 0 && skb->len % 64 == 0) - bSend0Byte = true; - } - if (bSend0Byte) - { -#if 1 - tx_urb_zero = usb_alloc_urb(0,GFP_ATOMIC); - if(!tx_urb_zero){ - RT_TRACE(COMP_ERR, "can't alloc urb for zero byte\n"); - return -ENOMEM; - } - usb_fill_bulk_urb(tx_urb_zero,udev, - usb_sndbulkpipe(udev,idx_pipe), &zero, - 0, tx_zero_isr, dev); - status = usb_submit_urb(tx_urb_zero, GFP_ATOMIC); - if (status){ - RT_TRACE(COMP_ERR, "Error TX URB for zero byte %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]), status); - return -1; - } -#endif - } - dev->trans_start = jiffies; - atomic_inc(&priv->tx_pending[tcb_desc->queue_index]); - return 0; - }else{ - RT_TRACE(COMP_ERR, "Error TX URB %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]), - status); - return -1; - } -} -#endif #if 0 void rtl8192_set_rate(struct net_device *dev) @@ -3528,7 +2980,6 @@ void rtl8192_set_rate(struct net_device *dev) #endif -#ifdef RTL8192SU void rtl8192SU_net_update(struct net_device *dev) { @@ -3739,42 +3190,6 @@ void rtl8192SU_link_change(struct net_device *dev) printk("<=====%s 2\n", __func__); } -#else -extern void rtl8192_update_ratr_table(struct net_device* dev); -void rtl8192_link_change(struct net_device *dev) -{ -// int i; - - struct r8192_priv *priv = ieee80211_priv(dev); - struct ieee80211_device* ieee = priv->ieee80211; - //write_nic_word(dev, BCN_INTR_ITV, net->beacon_interval); - if (ieee->state == IEEE80211_LINKED) - { - rtl8192_net_update(dev); - rtl8192_update_ratr_table(dev); -#if 1 - //add this as in pure N mode, wep encryption will use software way, but there is no chance to set this as wep will not set group key in wext. WB.2008.07.08 - if ((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type)) - EnableHWSecurityConfig8192(dev); -#endif - } - /*update timing params*/ -// RT_TRACE(COMP_CH, "========>%s(), chan:%d\n", __FUNCTION__, priv->chan); -// rtl8192_set_chan(dev, priv->chan); - if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC) - { - u32 reg = 0; - reg = read_nic_dword(dev, RCR); - if (priv->ieee80211->state == IEEE80211_LINKED) - priv->ReceiveConfig = reg |= RCR_CBSSID; - else - priv->ReceiveConfig = reg &= ~RCR_CBSSID; - write_nic_dword(dev, RCR, reg); - } - -// rtl8192_set_rxconf(dev); -} -#endif static struct ieee80211_qos_parameters def_qos_parameters = { {3,3,3,3},/* cw_min */ @@ -4072,9 +3487,7 @@ bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev) struct ieee80211_device* ieee = priv->ieee80211; // Added by Roger, 2008.08.29. -#ifdef RTL8192SU return false; -#endif if(ieee->bHalfWirelessN24GMode == true) Reval = true; @@ -4156,10 +3569,8 @@ void rtl8192_SetWirelessMode(struct net_device* dev, u8 wireless_mode) #ifdef TO_DO_LIST //// TODO: this function doesn't work well at this time, we shoud wait for FPGA ActUpdateChannelAccessSetting( pAdapter, pHalData->CurrentWirelessMode, &pAdapter->MgntInfo.Info8185.ChannelAccessSetting ); #endif -#ifdef RTL8192SU //LZM 090306 usb crash here, mark it temp //write_nic_word(dev, SIFS_OFDM, 0x0e0e); -#endif priv->ieee80211->mode = wireless_mode; if ((wireless_mode == WIRELESS_MODE_N_24G) || (wireless_mode == WIRELESS_MODE_N_5G)) @@ -4374,7 +3785,6 @@ static void rtl8192_init_priv_variable(struct net_device* dev) priv->ieee80211->InitialGainHandler = priv->ops->rtl819x_initial_gain; priv->card_type = USB; -#ifdef RTL8192SU //1 RTL8192SU/ priv->ieee80211->current_network.beacon_interval = DEFAULT_BEACONINTERVAL; priv->ieee80211->SetFwCmdHandler = HalSetFwCmd8192S; @@ -4433,51 +3843,6 @@ static void rtl8192_init_priv_variable(struct net_device* dev) //1 End -#else - -#ifdef TO_DO_LIST - if(Adapter->bInHctTest) - { - pHalData->ShortRetryLimit = 7; - pHalData->LongRetryLimit = 7; - } -#endif - { - priv->ShortRetryLimit = 0x30; - priv->LongRetryLimit = 0x30; - } - priv->EarlyRxThreshold = 7; - priv->enable_gpio0 = 0; - priv->TransmitConfig = - // TCR_DurProcMode | //for RTL8185B, duration setting by HW - //? TCR_DISReqQsize | - (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reservied. - (priv->ShortRetryLimit<<TCR_SRL_OFFSET)| // Short retry limit - (priv->LongRetryLimit<<TCR_LRL_OFFSET) | // Long retry limit - (false ? TCR_SAT: 0); // FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them -#ifdef TO_DO_LIST - if(Adapter->bInHctTest) - pHalData->ReceiveConfig = pHalData->CSMethod | - RCR_AMF | RCR_ADF | //RCR_AAP | //accept management/data - //guangan200710 - RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko. - RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC - RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet - ((u32)7<<RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Rx DMA Burst, 7: unlimited. - (pHalData->EarlyRxThreshold<<RCR_FIFO_OFFSET) | // Rx FIFO Threshold, 7: No Rx threshold. - (pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt:0); - else - -#endif - priv->ReceiveConfig = - RCR_AMF | RCR_ADF | //accept management/data - RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko. - RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC - //RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet - ((u32)7<<RCR_MXDMA_OFFSET)| // Max DMA Burst Size per Rx DMA Burst, 7: unlimited. - (priv->EarlyRxThreshold<<RX_FIFO_THRESHOLD_SHIFT) | // Rx FIFO Threshold, 7: No Rx threshold. - (priv->EarlyRxThreshold == 7 ? RCR_ONLYERLPKT:0); -#endif priv->AcmControl = 0; priv->pFirmware = (rt_firmware*)vmalloc(sizeof(rt_firmware)); @@ -4568,7 +3933,6 @@ static inline u16 endian_swap(u16* data) return *data; } -#ifdef RTL8192SU u8 rtl8192SU_UsbOptionToEndPointNumber(u8 UsbOption) { u8 nEndPoint = 0; @@ -6005,251 +5369,6 @@ static void rtl8192SU_read_eeprom_info(struct net_device *dev) //return RT_STATUS_SUCCESS; } -#else -static void rtl8192_read_eeprom_info(struct net_device* dev) -{ - u16 wEPROM_ID = 0; - u8 bMac_Tmp_Addr[6] = {0x00, 0xe0, 0x4c, 0x00, 0x00, 0x02}; - u8 bLoad_From_EEPOM = false; - struct r8192_priv *priv = ieee80211_priv(dev); - u16 tmpValue = 0; - RT_TRACE(COMP_EPROM, "===========>%s()\n", __FUNCTION__); - wEPROM_ID = eprom_read(dev, 0); //first read EEPROM ID out; - RT_TRACE(COMP_EPROM, "EEPROM ID is 0x%x\n", wEPROM_ID); - - if (wEPROM_ID != RTL8190_EEPROM_ID) - { - RT_TRACE(COMP_ERR, "EEPROM ID is invalid(is 0x%x(should be 0x%x)\n", wEPROM_ID, RTL8190_EEPROM_ID); - } - else - bLoad_From_EEPOM = true; - - if (bLoad_From_EEPOM) - { - tmpValue = eprom_read(dev, (EEPROM_VID>>1)); - priv->eeprom_vid = endian_swap(&tmpValue); - priv->eeprom_pid = eprom_read(dev, (EEPROM_PID>>1)); - tmpValue = eprom_read(dev, (EEPROM_ChannelPlan>>1)); - priv->eeprom_ChannelPlan =((tmpValue&0xff00)>>8); - priv->btxpowerdata_readfromEEPORM = true; - priv->eeprom_CustomerID = eprom_read(dev, (EEPROM_Customer_ID>>1)) >>8; - } - else - { - priv->eeprom_vid = 0; - priv->eeprom_pid = 0; - priv->card_8192_version = VERSION_819xU_B; - priv->eeprom_ChannelPlan = 0; - priv->eeprom_CustomerID = 0; - } - RT_TRACE(COMP_EPROM, "vid:0x%4x, pid:0x%4x, CustomID:0x%2x, ChanPlan:0x%x\n", priv->eeprom_vid, priv->eeprom_pid, priv->eeprom_CustomerID, priv->eeprom_ChannelPlan); - //set channelplan from eeprom - priv->ChannelPlan = priv->eeprom_ChannelPlan; - if (bLoad_From_EEPOM) - { - int i; - for (i=0; i<6; i+=2) - { - u16 tmp = 0; - tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i)>>1)); - *(u16*)(&dev->dev_addr[i]) = tmp; - } - } - else - { - memcpy(dev->dev_addr, bMac_Tmp_Addr, 6); - //should I set IDR0 here? - } - RT_TRACE(COMP_EPROM, "MAC addr:"MAC_FMT"\n", MAC_ARG(dev->dev_addr)); - priv->rf_type = RTL819X_DEFAULT_RF_TYPE; //default 1T2R - priv->rf_chip = RF_8256; - - if (priv->card_8192_version == (u8)VERSION_819xU_A) - { - //read Tx power gain offset of legacy OFDM to HT rate - if (bLoad_From_EEPOM) - priv->EEPROMTxPowerDiff = (eprom_read(dev, (EEPROM_TxPowerDiff>>1))&0xff00) >> 8; - else - priv->EEPROMTxPowerDiff = EEPROM_Default_TxPower; - RT_TRACE(COMP_EPROM, "TxPowerDiff:%d\n", priv->EEPROMTxPowerDiff); - //read ThermalMeter from EEPROM - if (bLoad_From_EEPOM) - priv->EEPROMThermalMeter = (u8)(eprom_read(dev, (EEPROM_ThermalMeter>>1))&0x00ff); - else - priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter; - RT_TRACE(COMP_EPROM, "ThermalMeter:%d\n", priv->EEPROMThermalMeter); - //vivi, for tx power track - priv->TSSI_13dBm = priv->EEPROMThermalMeter *100; - //read antenna tx power offset of B/C/D to A from EEPROM - if (bLoad_From_EEPOM) - priv->EEPROMPwDiff = (eprom_read(dev, (EEPROM_PwDiff>>1))&0x0f00)>>8; - else - priv->EEPROMPwDiff = EEPROM_Default_PwDiff; - RT_TRACE(COMP_EPROM, "TxPwDiff:%d\n", priv->EEPROMPwDiff); - // Read CrystalCap from EEPROM - if (bLoad_From_EEPOM) - priv->EEPROMCrystalCap = (eprom_read(dev, (EEPROM_CrystalCap>>1))&0x0f); - else - priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap; - RT_TRACE(COMP_EPROM, "CrystalCap = %d\n", priv->EEPROMCrystalCap); - //get per-channel Tx power level - if (bLoad_From_EEPOM) - priv->EEPROM_Def_Ver = (eprom_read(dev, (EEPROM_TxPwIndex_Ver>>1))&0xff00)>>8; - else - priv->EEPROM_Def_Ver = 1; - RT_TRACE(COMP_EPROM, "EEPROM_DEF_VER:%d\n", priv->EEPROM_Def_Ver); - if (priv->EEPROM_Def_Ver == 0) //old eeprom definition - { - int i; - if (bLoad_From_EEPOM) - priv->EEPROMTxPowerLevelCCK = (eprom_read(dev, (EEPROM_TxPwIndex_CCK>>1))&0xff) >> 8; - else - priv->EEPROMTxPowerLevelCCK = 0x10; - RT_TRACE(COMP_EPROM, "CCK Tx Power Levl: 0x%02x\n", priv->EEPROMTxPowerLevelCCK); - for (i=0; i<3; i++) - { - if (bLoad_From_EEPOM) - { - tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G+i)>>1); - if (((EEPROM_TxPwIndex_OFDM_24G+i) % 2) == 0) - tmpValue = tmpValue & 0x00ff; - else - tmpValue = (tmpValue & 0xff00) >> 8; - } - else - tmpValue = 0x10; - priv->EEPROMTxPowerLevelOFDM24G[i] = (u8) tmpValue; - RT_TRACE(COMP_EPROM, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i, priv->EEPROMTxPowerLevelCCK); - } - }//end if EEPROM_DEF_VER == 0 - else if (priv->EEPROM_Def_Ver == 1) - { - if (bLoad_From_EEPOM) - { - tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1>>1)); - tmpValue = (tmpValue & 0xff00) >> 8; - } - else - tmpValue = 0x10; - priv->EEPROMTxPowerLevelCCK_V1[0] = (u8)tmpValue; - - if (bLoad_From_EEPOM) - tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1 + 2)>>1); - else - tmpValue = 0x1010; - *((u16*)(&priv->EEPROMTxPowerLevelCCK_V1[1])) = tmpValue; - if (bLoad_From_EEPOM) - tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G_V1>>1)); - else - tmpValue = 0x1010; - *((u16*)(&priv->EEPROMTxPowerLevelOFDM24G[0])) = tmpValue; - if (bLoad_From_EEPOM) - tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G_V1+2)>>1); - else - tmpValue = 0x10; - priv->EEPROMTxPowerLevelOFDM24G[2] = (u8)tmpValue; - }//endif EEPROM_Def_Ver == 1 - - //update HAL variables - // - { - int i; - for (i=0; i<14; i++) - { - if (i<=3) - priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[0]; - else if (i>=4 && i<=9) - priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[1]; - else - priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[2]; - } - - for (i=0; i<14; i++) - { - if (priv->EEPROM_Def_Ver == 0) - { - if (i<=3) - priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[0] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]); - else if (i>=4 && i<=9) - priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK; - else - priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[2] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]); - } - else if (priv->EEPROM_Def_Ver == 1) - { - if (i<=3) - priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[0]; - else if (i>=4 && i<=9) - priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[1]; - else - priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[2]; - } - } - }//end update HAL variables - priv->TxPowerDiff = priv->EEPROMPwDiff; -// Antenna B gain offset to antenna A, bit0~3 - priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf); - // Antenna C gain offset to antenna A, bit4~7 - priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4); - // CrystalCap, bit12~15 - priv->CrystalCap = priv->EEPROMCrystalCap; - // ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2 - // 92U does not enable TX power tracking. - priv->ThermalMeter[0] = priv->EEPROMThermalMeter; - }//end if VersionID == VERSION_819xU_A - -//added by vivi, for dlink led, 20080416 - switch(priv->eeprom_CustomerID) - { - case EEPROM_CID_RUNTOP: - priv->CustomerID = RT_CID_819x_RUNTOP; - break; - - case EEPROM_CID_DLINK: - priv->CustomerID = RT_CID_DLINK; - break; - - default: - priv->CustomerID = RT_CID_DEFAULT; - break; - - } - - switch(priv->CustomerID) - { - case RT_CID_819x_RUNTOP: - priv->LedStrategy = SW_LED_MODE2; - break; - - case RT_CID_DLINK: - priv->LedStrategy = SW_LED_MODE4; - break; - - default: - priv->LedStrategy = SW_LED_MODE0; - break; - - } - - - if(priv->rf_type == RF_1T2R) - { - RT_TRACE(COMP_EPROM, "\n1T2R config\n"); - } - else - { - RT_TRACE(COMP_EPROM, "\n2T4R config\n"); - } - - // 2008/01/16 MH We can only know RF type in the function. So we have to init - // DIG RATR table again. - init_rate_adaptive(dev); - //we need init DIG RATR table here again. - - RT_TRACE(COMP_EPROM, "<===========%s()\n", __FUNCTION__); - return; -} -#endif short rtl8192_get_channel_map(struct net_device * dev) { @@ -6269,28 +5388,6 @@ short rtl8192_init(struct net_device *dev) struct r8192_priv *priv = ieee80211_priv(dev); -#ifndef RTL8192SU - memset(&(priv->stats),0,sizeof(struct Stats)); - memset(priv->txqueue_to_outpipemap,0,9); -#ifdef PIPE12 - { - int i=0; - u8 queuetopipe[]={3,2,1,0,4,8,7,6,5}; - memcpy(priv->txqueue_to_outpipemap,queuetopipe,9); -/* for(i=0;i<9;i++) - printk("%d ",priv->txqueue_to_outpipemap[i]); - printk("\n");*/ - } -#else - { - u8 queuetopipe[]={3,2,1,0,4,4,0,4,4}; - memcpy(priv->txqueue_to_outpipemap,queuetopipe,9); -/* for(i=0;i<9;i++) - printk("%d ",priv->txqueue_to_outpipemap[i]); - printk("\n");*/ - } -#endif -#endif rtl8192_init_priv_variable(dev); rtl8192_init_priv_lock(priv); rtl8192_init_priv_task(dev); @@ -6404,7 +5501,6 @@ void rtl8192_hwconfig(struct net_device* dev) } -#ifdef RTL8192SU // // Description: @@ -6892,9 +5988,7 @@ void rtl8192SU_HwConfigureRTL8192SUsb(struct net_device *dev) //rtl8192SU_SetHwRegAmpduMinSpace(dev, priv->MinSpaceCfg); } -#endif -#ifdef RTL8192SU // Description: Initial HW relted registers. // // Assumption: This function is only invoked at driver intialization once. @@ -7232,247 +6326,6 @@ end: return rtStatus; } -#else - -//InitializeAdapter and PhyCfg -bool rtl8192_adapter_start(struct net_device *dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - u32 dwRegRead = 0; - bool init_status = true; - RT_TRACE(COMP_INIT, "====>%s()\n", __FUNCTION__); - priv->Rf_Mode = RF_OP_By_SW_3wire; - //for ASIC power on sequence - write_nic_byte_E(dev, 0x5f, 0x80); - mdelay(50); - write_nic_byte_E(dev, 0x5f, 0xf0); - write_nic_byte_E(dev, 0x5d, 0x00); - write_nic_byte_E(dev, 0x5e, 0x80); - write_nic_byte(dev, 0x17, 0x37); - mdelay(10); -//#ifdef TO_DO_LIST - priv->pFirmware->firmware_status = FW_STATUS_0_INIT; - //config CPUReset Register - //Firmware Reset or not? - dwRegRead = read_nic_dword(dev, CPU_GEN); - if (priv->pFirmware->firmware_status == FW_STATUS_0_INIT) - dwRegRead |= CPU_GEN_SYSTEM_RESET; //do nothing here? - else if (priv->pFirmware->firmware_status == FW_STATUS_5_READY) - dwRegRead |= CPU_GEN_FIRMWARE_RESET; - else - RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __FUNCTION__, priv->pFirmware->firmware_status); - - write_nic_dword(dev, CPU_GEN, dwRegRead); - //mdelay(30); - //config BB. - rtl8192_BBConfig(dev); - -#if 1 - //Loopback mode or not - priv->LoopbackMode = RTL819xU_NO_LOOPBACK; -// priv->LoopbackMode = RTL819xU_MAC_LOOPBACK; - - dwRegRead = read_nic_dword(dev, CPU_GEN); - if (priv->LoopbackMode == RTL819xU_NO_LOOPBACK) - dwRegRead = ((dwRegRead & CPU_GEN_NO_LOOPBACK_MSK) | CPU_GEN_NO_LOOPBACK_SET); - else if (priv->LoopbackMode == RTL819xU_MAC_LOOPBACK) - dwRegRead |= CPU_CCK_LOOPBACK; - else - RT_TRACE(COMP_ERR, "Serious error in %s(): wrong loopback mode setting(%d)\n", __FUNCTION__, priv->LoopbackMode); - - write_nic_dword(dev, CPU_GEN, dwRegRead); - - //after reset cpu, we need wait for a seconds to write in register. - udelay(500); - - //xiong add for new bitfile:usb suspend reset pin set to 1. //do we need? - write_nic_byte_E(dev, 0x5f, (read_nic_byte_E(dev, 0x5f)|0x20)); - - //Set Hardware - rtl8192_hwconfig(dev); - - //turn on Tx/Rx - write_nic_byte(dev, CMDR, CR_RE|CR_TE); - - //set IDR0 here - write_nic_dword(dev, MAC0, ((u32*)dev->dev_addr)[0]); - write_nic_word(dev, MAC4, ((u16*)(dev->dev_addr + 4))[0]); - - //set RCR - write_nic_dword(dev, RCR, priv->ReceiveConfig); - - //Initialize Number of Reserved Pages in Firmware Queue - write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |\ - NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT | \ - NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT | \ - NUM_OF_PAGE_IN_FW_QUEUE_VO <<RSVD_FW_QUEUE_PAGE_VO_SHIFT); - write_nic_dword(dev, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |\ - NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT); - write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW| \ - NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT -// | NUM_OF_PAGE_IN_FW_QUEUE_PUB<<RSVD_FW_QUEUE_PAGE_PUB_SHIFT - ); - write_nic_dword(dev, RATR0+4*7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK)); - - //Set AckTimeout - // TODO: (it value is only for FPGA version). need to be changed!!2006.12.18, by Emily - write_nic_byte(dev, ACK_TIMEOUT, 0x30); - -// RT_TRACE(COMP_INIT, "%s():priv->ResetProgress is %d\n", __FUNCTION__,priv->ResetProgress); - if(priv->ResetProgress == RESET_TYPE_NORESET) - rtl8192_SetWirelessMode(dev, priv->ieee80211->mode); - if(priv->ResetProgress == RESET_TYPE_NORESET){ - CamResetAllEntry(dev); - { - u8 SECR_value = 0x0; - SECR_value |= SCR_TxEncEnable; - SECR_value |= SCR_RxDecEnable; - SECR_value |= SCR_NoSKMC; - write_nic_byte(dev, SECR, SECR_value); - } - } - - //Beacon related - write_nic_word(dev, ATIMWND, 2); - write_nic_word(dev, BCN_INTERVAL, 100); - - { -#define DEFAULT_EDCA 0x005e4332 - int i; - for (i=0; i<QOS_QUEUE_NUM; i++) - write_nic_dword(dev, WDCAPARA_ADD[i], DEFAULT_EDCA); - } - - rtl8192_phy_configmac(dev); - - if (priv->card_8192_version == (u8) VERSION_819xU_A) - { - rtl8192_phy_getTxPower(dev); - rtl8192_phy_setTxPower(dev, priv->chan); - } - - - priv->usb_error = false; - //Firmware download - init_status = init_firmware(dev); - if(!init_status) - { - RT_TRACE(COMP_ERR,"ERR!!! %s(): Firmware download is failed\n", __FUNCTION__); - return init_status; - } - RT_TRACE(COMP_INIT, "%s():after firmware download\n", __FUNCTION__); - // -#ifdef TO_DO_LIST -if(Adapter->ResetProgress == RESET_TYPE_NORESET) - { - if(pMgntInfo->RegRfOff == TRUE) - { // User disable RF via registry. - RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n")); - MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW); - // Those action will be discard in MgntActSet_RF_State because off the same state - for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++) - PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); - } - else if(pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) - { // H/W or S/W RF OFF before sleep. - RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason)); - MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason); - } - else - { - pHalData->eRFPowerState = eRfOn; - pMgntInfo->RfOffReason = 0; - RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): RF is on ----------\n")); - } - } - else - { - if(pHalData->eRFPowerState == eRfOff) - { - MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason); - // Those action will be discard in MgntActSet_RF_State because off the same state - for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++) - PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); - } - } -#endif - //config RF. - if(priv->ResetProgress == RESET_TYPE_NORESET){ - rtl8192_phy_RFConfig(dev); - RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __FUNCTION__); - } - - - if(priv->ieee80211->FwRWRF) - // We can force firmware to do RF-R/W - priv->Rf_Mode = RF_OP_By_FW; - else - priv->Rf_Mode = RF_OP_By_SW_3wire; - - - rtl8192_phy_updateInitGain(dev); - /*--set CCK and OFDM Block "ON"--*/ - rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1); - rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1); - - if(priv->ResetProgress == RESET_TYPE_NORESET) - { - //if D or C cut - u8 tmpvalue = read_nic_byte(dev, 0x301); - if(tmpvalue ==0x03) - { - priv->bDcut = TRUE; - RT_TRACE(COMP_POWER_TRACKING, "D-cut\n"); - } - else - { - priv->bDcut = FALSE; - RT_TRACE(COMP_POWER_TRACKING, "C-cut\n"); - } - dm_initialize_txpower_tracking(dev); - - if(priv->bDcut == TRUE) - { - u32 i, TempCCk; - u32 tmpRegA= rtl8192_QueryBBReg(dev,rOFDM0_XATxIQImbalance,bMaskDWord); - // u32 tmpRegC= rtl8192_QueryBBReg(dev,rOFDM0_XCTxIQImbalance,bMaskDWord); - for(i = 0; i<TxBBGainTableLength; i++) - { - if(tmpRegA == priv->txbbgain_table[i].txbbgain_value) - { - priv->rfa_txpowertrackingindex= (u8)i; - priv->rfa_txpowertrackingindex_real= (u8)i; - priv->rfa_txpowertracking_default= priv->rfa_txpowertrackingindex; - break; - } - } - - TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2); - - for(i=0 ; i<CCKTxBBGainTableLength ; i++) - { - - if(TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0]) - { - priv->cck_present_attentuation_20Mdefault=(u8) i; - break; - } - } - priv->cck_present_attentuation_40Mdefault= 0; - priv->cck_present_attentuation_difference= 0; - priv->cck_present_attentuation = priv->cck_present_attentuation_20Mdefault; - - // pMgntInfo->bTXPowerTracking = FALSE;//TEMPLY DISABLE - } - } - write_nic_byte(dev, 0x87, 0x0); - - -#endif - return init_status; -} - -#endif /* this configures registers for beacon tx and enables it via * rtl8192_beacon_tx_enable(). rtl8192_beacon_tx_disable() might * be used to stop beacon transmission @@ -8489,7 +7342,6 @@ out: return ret; } -#ifdef RTL8192SU u8 rtl8192SU_HwRateToMRate(bool bIsHT, u8 rate,bool bFirstAMPDU) { @@ -8592,7 +7444,6 @@ u8 rtl8192SU_HwRateToMRate(bool bIsHT, u8 rate,bool bFirstAMPDU) } return ret_rate; } -#endif u8 HwRateToMRate90(bool bIsHT, u8 rate) { @@ -9043,7 +7894,6 @@ rtl819x_signal_scale_mapping( return retsig; } -#ifdef RTL8192SU /*----------------------------------------------------------------------------- * Function: QueryRxPhyStatus8192S() * @@ -9109,17 +7959,6 @@ static void rtl8192SU_query_rxphystatus( pstats->bPacketBeacon = precord_stats->bPacketBeacon = bPacketBeacon; pstats->bToSelfBA = precord_stats->bToSelfBA = bToSelfBA; -#ifndef RTL8192SU - phy_sts_ofdm_819xusb_t* pofdm_buf = NULL; - prxpkt = (u8*)pdrvinfo; - - /* Move pointer to the 16th bytes. Phy status start address. */ - prxpkt += sizeof(rx_drvinfo_819x_usb); - - /* Initial the cck and ofdm buffer pointer */ - pcck_buf = (phy_sts_cck_819xusb_t *)prxpkt; - pofdm_buf = (phy_sts_ofdm_819xusb_t *)prxpkt; -#endif pstats->RxMIMOSignalQuality[0] = -1; pstats->RxMIMOSignalQuality[1] = -1; @@ -9346,256 +8185,6 @@ static void rtl8192SU_query_rxphystatus( pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)(total_rssi/=rf_rx_num))); } }/* QueryRxPhyStatus8192S */ -#else -static void rtl8192_query_rxphystatus( - struct r8192_priv * priv, - struct ieee80211_rx_stats * pstats, - rx_drvinfo_819x_usb * pdrvinfo, - struct ieee80211_rx_stats * precord_stats, - bool bpacket_match_bssid, - bool bpacket_toself, - bool bPacketBeacon, - bool bToSelfBA - ) -{ - //PRT_RFD_STATUS pRtRfdStatus = &(pRfd->Status); - phy_sts_ofdm_819xusb_t* pofdm_buf; - phy_sts_cck_819xusb_t * pcck_buf; - phy_ofdm_rx_status_rxsc_sgien_exintfflag* prxsc; - u8 *prxpkt; - u8 i, max_spatial_stream, tmp_rxsnr, tmp_rxevm, rxsc_sgien_exflg; - char rx_pwr[4], rx_pwr_all=0; - //long rx_avg_pwr = 0; - char rx_snrX, rx_evmX; - u8 evm, pwdb_all; - u32 RSSI, total_rssi=0;//, total_evm=0; -// long signal_strength_index = 0; - u8 is_cck_rate=0; - u8 rf_rx_num = 0; - - - priv->stats.numqry_phystatus++; - - is_cck_rate = rx_hal_is_cck_rate(pdrvinfo); - - // Record it for next packet processing - memset(precord_stats, 0, sizeof(struct ieee80211_rx_stats)); - pstats->bPacketMatchBSSID = precord_stats->bPacketMatchBSSID = bpacket_match_bssid; - pstats->bPacketToSelf = precord_stats->bPacketToSelf = bpacket_toself; - pstats->bIsCCK = precord_stats->bIsCCK = is_cck_rate;//RX_HAL_IS_CCK_RATE(pDrvInfo); - pstats->bPacketBeacon = precord_stats->bPacketBeacon = bPacketBeacon; - pstats->bToSelfBA = precord_stats->bToSelfBA = bToSelfBA; - - prxpkt = (u8*)pdrvinfo; - - /* Move pointer to the 16th bytes. Phy status start address. */ - prxpkt += sizeof(rx_drvinfo_819x_usb); - - /* Initial the cck and ofdm buffer pointer */ - pcck_buf = (phy_sts_cck_819xusb_t *)prxpkt; - pofdm_buf = (phy_sts_ofdm_819xusb_t *)prxpkt; - - pstats->RxMIMOSignalQuality[0] = -1; - pstats->RxMIMOSignalQuality[1] = -1; - precord_stats->RxMIMOSignalQuality[0] = -1; - precord_stats->RxMIMOSignalQuality[1] = -1; - - if(is_cck_rate) - { - // - // (1)Hardware does not provide RSSI for CCK - // - - // - // (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive) - // - u8 report;//, cck_agc_rpt; - - priv->stats.numqry_phystatusCCK++; - - if(!priv->bCckHighPower) - { - report = pcck_buf->cck_agc_rpt & 0xc0; - report = report>>6; - switch(report) - { - //Fixed by Jacken from Bryant 2008-03-20 - //Original value is -38 , -26 , -14 , -2 - //Fixed value is -35 , -23 , -11 , 6 - case 0x3: - rx_pwr_all = -35 - (pcck_buf->cck_agc_rpt & 0x3e); - break; - case 0x2: - rx_pwr_all = -23 - (pcck_buf->cck_agc_rpt & 0x3e); - break; - case 0x1: - rx_pwr_all = -11 - (pcck_buf->cck_agc_rpt & 0x3e); - break; - case 0x0: - rx_pwr_all = 6 - (pcck_buf->cck_agc_rpt & 0x3e); - break; - } - } - else - { - report = pcck_buf->cck_agc_rpt & 0x60; - report = report>>5; - switch(report) - { - case 0x3: - rx_pwr_all = -35 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ; - break; - case 0x2: - rx_pwr_all = -23 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1); - break; - case 0x1: - rx_pwr_all = -11 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ; - break; - case 0x0: - rx_pwr_all = 6 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ; - break; - } - } - - pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all); - pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all; - pstats->RecvSignalPower = pwdb_all; - - // - // (3) Get Signal Quality (EVM) - // - //if(bpacket_match_bssid) - { - u8 sq; - - if(pstats->RxPWDBAll > 40) - { - sq = 100; - }else - { - sq = pcck_buf->sq_rpt; - - if(pcck_buf->sq_rpt > 64) - sq = 0; - else if (pcck_buf->sq_rpt < 20) - sq = 100; - else - sq = ((64-sq) * 100) / 44; - } - pstats->SignalQuality = precord_stats->SignalQuality = sq; - pstats->RxMIMOSignalQuality[0] = precord_stats->RxMIMOSignalQuality[0] = sq; - pstats->RxMIMOSignalQuality[1] = precord_stats->RxMIMOSignalQuality[1] = -1; - } - } - else - { - priv->stats.numqry_phystatusHT++; - // - // (1)Get RSSI for HT rate - // - for(i=RF90_PATH_A; i<priv->NumTotalRFPath; i++) - { - // 2008/01/30 MH we will judge RF RX path now. - if (priv->brfpath_rxenable[i]) - rf_rx_num++; - else - continue; - - if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, i)) - continue; - - //Fixed by Jacken from Bryant 2008-03-20 - //Original value is 106 - rx_pwr[i] = ((pofdm_buf->trsw_gain_X[i]&0x3F)*2) - 106; - - //Get Rx snr value in DB - tmp_rxsnr = pofdm_buf->rxsnr_X[i]; - rx_snrX = (char)(tmp_rxsnr); - //rx_snrX >>= 1;; - rx_snrX /= 2; - priv->stats.rxSNRdB[i] = (long)rx_snrX; - - /* Translate DBM to percentage. */ - RSSI = rtl819x_query_rxpwrpercentage(rx_pwr[i]); - total_rssi += RSSI; - - /* Record Signal Strength for next packet */ - //if(bpacket_match_bssid) - { - pstats->RxMIMOSignalStrength[i] =(u8) RSSI; - precord_stats->RxMIMOSignalStrength[i] =(u8) RSSI; - } - } - - - // - // (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive) - // - //Fixed by Jacken from Bryant 2008-03-20 - //Original value is 106 - rx_pwr_all = (((pofdm_buf->pwdb_all ) >> 1 )& 0x7f) -106; - pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all); - - pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all; - pstats->RxPower = precord_stats->RxPower = rx_pwr_all; - - // - // (3)EVM of HT rate - // - if(pdrvinfo->RxHT && pdrvinfo->RxRate>=DESC90_RATEMCS8 && - pdrvinfo->RxRate<=DESC90_RATEMCS15) - max_spatial_stream = 2; //both spatial stream make sense - else - max_spatial_stream = 1; //only spatial stream 1 makes sense - - for(i=0; i<max_spatial_stream; i++) - { - tmp_rxevm = pofdm_buf->rxevm_X[i]; - rx_evmX = (char)(tmp_rxevm); - - // Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment - // fill most significant bit to "zero" when doing shifting operation which may change a negative - // value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore. - rx_evmX /= 2; //dbm - - evm = rtl819x_evm_dbtopercentage(rx_evmX); -#if 0 - EVM = SignalScaleMapping(EVM);//make it good looking, from 0~100 -#endif - //if(bpacket_match_bssid) - { - if(i==0) // Fill value in RFD, Get the first spatial stream only - pstats->SignalQuality = precord_stats->SignalQuality = (u8)(evm & 0xff); - pstats->RxMIMOSignalQuality[i] = precord_stats->RxMIMOSignalQuality[i] = (u8)(evm & 0xff); - } - } - - - /* record rx statistics for debug */ - rxsc_sgien_exflg = pofdm_buf->rxsc_sgien_exflg; - prxsc = (phy_ofdm_rx_status_rxsc_sgien_exintfflag *)&rxsc_sgien_exflg; - if(pdrvinfo->BW) //40M channel - priv->stats.received_bwtype[1+prxsc->rxsc]++; - else //20M channel - priv->stats.received_bwtype[0]++; - } - - //UI BSS List signal strength(in percentage), make it good looking, from 0~100. - //It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp(). - if(is_cck_rate) - { - pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)pwdb_all));//PWDB_ALL; - - } - else - { - //pRfd->Status.SignalStrength = pRecordRfd->Status.SignalStrength = (u8)(SignalScaleMapping(total_rssi/=RF90_PATH_MAX));//(u8)(total_rssi/=RF90_PATH_MAX); - // We can judge RX path number now. - if (rf_rx_num != 0) - pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)(total_rssi/=rf_rx_num))); - } -} /* QueryRxPhyStatus8190Pci */ -#endif void rtl8192_record_rxdesc_forlateruse( @@ -9608,7 +8197,6 @@ rtl8192_record_rxdesc_forlateruse( ptarget_stats->Seq_Num = psrc_stats->Seq_Num; } -#ifdef RTL8192SU static void rtl8192SU_query_rxphystatus( struct r8192_priv * priv, struct ieee80211_rx_stats * pstats, @@ -9688,75 +8276,6 @@ void rtl8192SU_TranslateRxSignalStuff(struct sk_buff *skb, rtl8192_record_rxdesc_forlateruse(pstats, &previous_stats); } -#else -void TranslateRxSignalStuff819xUsb(struct sk_buff *skb, - struct ieee80211_rx_stats * pstats, - rx_drvinfo_819x_usb *pdrvinfo) -{ - // TODO: We must only check packet for current MAC address. Not finish - rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb; - struct net_device *dev=info->dev; - struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); - bool bpacket_match_bssid, bpacket_toself; - bool bPacketBeacon=FALSE, bToSelfBA=FALSE; - static struct ieee80211_rx_stats previous_stats; - struct ieee80211_hdr_3addr *hdr;//by amy - u16 fc,type; - - // Get Signal Quality for only RX data queue (but not command queue) - - u8* tmp_buf; - //u16 tmp_buf_len = 0; - u8 *praddr; - - /* Get MAC frame start address. */ - tmp_buf = (u8*)skb->data;// + get_rxpacket_shiftbytes_819xusb(pstats); - - hdr = (struct ieee80211_hdr_3addr *)tmp_buf; - fc = le16_to_cpu(hdr->frame_ctl); - type = WLAN_FC_GET_TYPE(fc); - praddr = hdr->addr1; - - /* Check if the received packet is acceptabe. */ - bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) && - (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3)) - && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV)); - bpacket_toself = bpacket_match_bssid & (eqMacAddr(praddr, priv->ieee80211->dev->dev_addr)); - -#if 1//cosa - if(WLAN_FC_GET_FRAMETYPE(fc)== IEEE80211_STYPE_BEACON) - { - bPacketBeacon = true; - //DbgPrint("Beacon 2, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf); - } - if(WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BLOCKACK) - { - if((eqMacAddr(praddr,dev->dev_addr))) - bToSelfBA = true; - //DbgPrint("BlockAck, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf); - } - -#endif - - - if(bpacket_match_bssid) - { - priv->stats.numpacket_matchbssid++; - } - if(bpacket_toself){ - priv->stats.numpacket_toself++; - } - // - // Process PHY information for previous packet (RSSI/PWDB/EVM) - // - // Because phy information is contained in the last packet of AMPDU only, so driver - // should process phy information of previous packet - rtl8192_process_phyinfo(priv, tmp_buf, &previous_stats, pstats); - rtl8192_query_rxphystatus(priv, pstats, pdrvinfo, &previous_stats, bpacket_match_bssid,bpacket_toself,bPacketBeacon,bToSelfBA); - rtl8192_record_rxdesc_forlateruse(pstats, &previous_stats); - -} -#endif /** * Function: UpdateReceivedRateHistogramStatistics @@ -9840,7 +8359,6 @@ UpdateReceivedRateHistogramStatistics8190( priv->stats.received_rate_histogram[rcvType][rateIndex]++; } -#ifdef RTL8192SU void rtl8192SU_query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe) { rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb; @@ -9978,128 +8496,7 @@ if(stats->bHwError) rtl8192SU_TranslateRxSignalStuff(skb, stats, desc, driver_info); } } -#else -void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe) -{ - rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb; - struct net_device *dev=info->dev; - struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); - //rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data; - rx_drvinfo_819x_usb *driver_info = NULL; - - // - //Get Rx Descriptor Information - // - { - rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data; - - stats->Length = desc->Length; - stats->RxDrvInfoSize = desc->RxDrvInfoSize; - stats->RxBufShift = 0;//desc->Shift&0x03; - stats->bICV = desc->ICV; - stats->bCRC = desc->CRC32; - stats->bHwError = stats->bCRC|stats->bICV; - //RTL8190 set this bit to indicate that Hw does not decrypt packet - stats->Decrypted = !desc->SWDec; - } - if((priv->ieee80211->pHTInfo->bCurrentHTSupport == true) && (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP)) - { - stats->bHwError = false; - } - else - { - stats->bHwError = stats->bCRC|stats->bICV; - } - - if(stats->Length < 24 || stats->Length > MAX_8192U_RX_SIZE) - stats->bHwError |= 1; - // - //Get Driver Info - // - // TODO: Need to verify it on FGPA platform - //Driver info are written to the RxBuffer following rx desc - if (stats->RxDrvInfoSize != 0) { - driver_info = (rx_drvinfo_819x_usb *)(skb->data + sizeof(rx_desc_819x_usb) + \ - stats->RxBufShift); - /* unit: 0.5M */ - /* TODO */ - if(!stats->bHwError){ - u8 ret_rate; - ret_rate = HwRateToMRate90(driver_info->RxHT, driver_info->RxRate); - if(ret_rate == 0xff) - { - // Abnormal Case: Receive CRC OK packet with Rx descriptor indicating non supported rate. - // Special Error Handling here, 2008.05.16, by Emily - - stats->bHwError = 1; - stats->rate = MGN_1M; //Set 1M rate by default - }else - { - stats->rate = ret_rate; - } - } - else - stats->rate = 0x02; - - stats->bShortPreamble = driver_info->SPLCP; - - - UpdateReceivedRateHistogramStatistics8190(dev, stats); - - stats->bIsAMPDU = (driver_info->PartAggr==1); - stats->bFirstMPDU = (driver_info->PartAggr==1) && (driver_info->FirstAGGR==1); -#if 0 - // TODO: it is debug only. It should be disabled in released driver. 2007.1.12 by Joseph - UpdateRxAMPDUHistogramStatistics8190(Adapter, pRfd); -#endif - stats->TimeStampLow = driver_info->TSFL; - // xiong mask it, 070514 - //pRfd->Status.TimeStampHigh = PlatformEFIORead4Byte(Adapter, TSFR+4); - // stats->TimeStampHigh = read_nic_dword(dev, TSFR+4); - - UpdateRxPktTimeStamp8190(dev, stats); - - // - // Rx A-MPDU - // - if(driver_info->FirstAGGR==1 || driver_info->PartAggr == 1) - RT_TRACE(COMP_RXDESC, "driver_info->FirstAGGR = %d, driver_info->PartAggr = %d\n", - driver_info->FirstAGGR, driver_info->PartAggr); - - } - - skb_pull(skb,sizeof(rx_desc_819x_usb)); - // - // Get Total offset of MPDU Frame Body - // - if((stats->RxBufShift + stats->RxDrvInfoSize) > 0) { - stats->bShift = 1; - skb_pull(skb,stats->RxBufShift + stats->RxDrvInfoSize); - } - - /* for debug 2008.5.29 */ -#if 0 - { - int i; - printk("\n>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>\n"); - for(i = 0; i < skb->len; i++) { - if(i % 10 == 0) printk("\n"); - printk("%02x ", skb->data[i]); - } - printk("\n<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<\n"); - } -#endif - - //added by vivi, for MP, 20080108 - stats->RxIs40MHzPacket = driver_info->BW; - if(stats->RxDrvInfoSize != 0) - TranslateRxSignalStuff819xUsb(skb, stats, driver_info); - -} -#endif - -#ifdef RTL8192SU #if 0 /*----------------------------------------------------------------------------- * Function: UpdateRxAMPDUHistogramStatistics8192S @@ -10196,10 +8593,8 @@ UpdateRxAMPDUHistogramStatistics8192S( } // UpdateRxAMPDUHistogramStatistics8192S #endif -#endif -#ifdef RTL8192SU // // Description: // The strarting address of wireless lan header will shift 1 or 2 or 3 or "more" bytes for the following reason : @@ -10285,67 +8680,6 @@ void rtl8192SU_rx_nomal(struct sk_buff* skb) } } -#else -u32 GetRxPacketShiftBytes819xUsb(struct ieee80211_rx_stats *Status, bool bIsRxAggrSubframe) -{ - return (sizeof(rx_desc_819x_usb) + Status->RxDrvInfoSize - + Status->RxBufShift); -} - -void rtl8192_rx_nomal(struct sk_buff* skb) -{ - rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb; - struct net_device *dev=info->dev; - struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); - struct ieee80211_rx_stats stats = { - .signal = 0, - .noise = -98, - .rate = 0, - // .mac_time = jiffies, - .freq = IEEE80211_24GHZ_BAND, - }; - u32 rx_pkt_len = 0; - struct ieee80211_hdr_1addr *ieee80211_hdr = NULL; - bool unicast_packet = false; - - /* 20 is for ps-poll */ - if((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) { - /* first packet should not contain Rx aggregation header */ - query_rxdesc_status(skb, &stats, false); - /* TODO */ - /* hardware related info */ - /* Process the MPDU recevied */ - skb_trim(skb, skb->len - 4/*sCrcLng*/); - - rx_pkt_len = skb->len; - ieee80211_hdr = (struct ieee80211_hdr_1addr *)skb->data; - unicast_packet = false; - if(is_broadcast_ether_addr(ieee80211_hdr->addr1)) { - //TODO - }else if(is_multicast_ether_addr(ieee80211_hdr->addr1)){ - //TODO - }else { - /* unicast packet */ - unicast_packet = true; - } - - if(!ieee80211_rx(priv->ieee80211,skb, &stats)) { - dev_kfree_skb_any(skb); - } else { - priv->stats.rxoktotal++; - if(unicast_packet) { - priv->stats.rxbytesunicast += rx_pkt_len; - } - } - } else { - priv->stats.rxurberr++; - printk("actual_length:%d\n", skb->len); - dev_kfree_skb_any(skb); - } - -} - -#endif void rtl819xusb_process_received_packet( @@ -10424,7 +8758,6 @@ void query_rx_cmdpkt_desc_status(struct sk_buff *skb, struct ieee80211_rx_stats stats->ntotalfrag = 1; } -#ifdef RTL8192SU void rtl8192SU_rx_cmd(struct sk_buff *skb) { struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb; @@ -10495,70 +8828,6 @@ void rtl8192SU_rx_cmd(struct sk_buff *skb) RT_TRACE(COMP_RECV, "<--- HalUsbInCommandComplete8192SUsb()\n"); } -#else -void rtl8192_rx_cmd(struct sk_buff *skb) -{ - struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb; - struct net_device *dev = info->dev; - //int ret; -// struct urb *rx_urb = info->urb; - /* TODO */ - struct ieee80211_rx_stats stats = { - .signal = 0, - .noise = -98, - .rate = 0, - // .mac_time = jiffies, - .freq = IEEE80211_24GHZ_BAND, - }; - - if((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) - { - - query_rx_cmdpkt_desc_status(skb,&stats); - // this is to be done by amy 080508 prfd->queue_id = 1; - - - // - // Process the command packet received. - // - - rtl819xusb_process_received_packet(dev,&stats); - - dev_kfree_skb_any(skb); - } - else - ; - - -#if 0 - desc = (u32*)(skb->data); - cmd = (desc[0] >> 30) & 0x03; - - if(cmd == 0x00) {//beacon interrupt - //send beacon packet - skb = ieee80211_get_beacon(priv->ieee80211); - - if(!skb){ - DMESG("not enought memory for allocating beacon"); - return; - } - skb->cb[0] = BEACON_PRIORITY; - skb->cb[1] = 0; - skb->cb[2] = ieeerate2rtlrate(priv->ieee80211->basic_rate); - ret = rtl8192_tx(dev, skb); - - if( ret != 0 ){ - printk(KERN_ALERT "tx beacon packet error : %d !\n", ret); - } - dev_kfree_skb_any(skb); - } else {//0x00 - //{ log the device information - // At present, It is not implemented just now. - //} - } -#endif -} -#endif void rtl8192_irq_rx_tasklet(struct r8192_priv *priv) { @@ -10699,17 +8968,10 @@ static int __devinit rtl8192_usb_probe(struct usb_interface *intf, priv->ieee80211 = netdev_priv(dev); priv->udev=udev; -#ifdef RTL8192SU HalUsbSetQueuePipeMapping8192SUsb(intf, dev); -#endif -#ifdef RTL8192SU //printk("===============>NIC 8192SU\n"); priv->ops = &rtl8192su_ops; -#else - //printk("===============>NIC 8192U\n"); - priv->ops = &rtl8192u_ops; -#endif dev->netdev_ops = &rtl8192_netdev_ops; diff --git a/drivers/staging/rtl8192su/r8192U_dm.c b/drivers/staging/rtl8192su/r8192U_dm.c index ef1dcc2e88f..5f970e4dfd2 100644 --- a/drivers/staging/rtl8192su/r8192U_dm.c +++ b/drivers/staging/rtl8192su/r8192U_dm.c @@ -15,7 +15,6 @@ Major Change History: --*/ -#ifdef RTL8192SU #include "r8192U.h" #include "r8192U_dm.h" //#include "r8190_rtl8256.h" @@ -23,15 +22,6 @@ Major Change History: #include "r8192S_hw.h" #include "r8192S_phy.h" #include "r8192S_phyreg.h" -#else -#include "r8192U.h" -#include "r8192U_dm.h" -#include "r8192U_hw.h" -#include "r819xU_phy.h" -#include "r819xU_phyreg.h" -#include "r8190_rtl8256.h" -#include "r819xU_cmdpkt.h" -#endif /*---------------------------Define Local Constant---------------------------*/ // @@ -50,7 +40,6 @@ typedef enum _HT_IOT_PEER }HT_IOT_PEER_E, *PHTIOT_PEER_E; #endif #if 1 -#ifdef RTL8192SU static u32 edca_setting_DL[HT_IOT_PEER_MAX] = // UNKNOWN REALTEK_90 /*REALTEK_92SE*/ BROADCOM RALINK ATHEROS CISCO MARVELL 92U_AP SELF_AP { 0xa44f, 0x5ea44f, 0x5ea44f, 0xa44f, 0xa44f, 0xa44f, 0xa630, 0xa42b, 0x5e4322, 0x5e4322}; @@ -58,14 +47,6 @@ typedef enum _HT_IOT_PEER // UNKNOWN REALTEK /*REALTEK_92SE*/ BROADCOM RALINK ATHEROS CISCO MARVELL 92U_AP SELF_AP { 0x5ea44f, 0xa44f, 0x5ea44f, 0x5e4322, 0x5ea422, 0x5e4322, 0x3ea44f, 0x5ea42b, 0x5e4322, 0x5e4322}; -#else - -static u32 edca_setting_DL[HT_IOT_PEER_MAX] = - { 0x5e4322, 0x5e4322, 0x5ea44f, 0x5e4322, 0x604322, 0xa44f, 0x5ea44f}; -static u32 edca_setting_UL[HT_IOT_PEER_MAX] = - { 0x5e4322, 0xa44f, 0x5ea44f, 0x5e4322, 0x604322, 0x5ea44f, 0x5ea44f}; - -#endif #endif #define RTK_UL_EDCA 0xa44f @@ -202,7 +183,6 @@ static void dm_ctstoself(struct net_device *dev); //================================================================================ // HW Dynamic mechanism interface. //================================================================================ -#ifdef RTL8192SU static void dm_CheckAggrPolicy(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -273,7 +253,6 @@ static void dm_CheckAggrPolicy(struct net_device *dev) lastTxOkCnt = priv->stats.txbytesunicast; lastRxOkCnt = priv->stats.rxbytesunicast; } -#endif // // Description: // Prepare SW resource for HW dynamic mechanism. @@ -293,11 +272,7 @@ init_hal_dm(struct net_device *dev) //Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code. dm_init_dynamic_txpower(dev); init_rate_adaptive(dev); -#ifdef RTL8192SU dm_initialize_txpower_tracking(dev); -#else - //dm_initialize_txpower_tracking(dev); -#endif dm_dig_init(dev); dm_init_edca_turbo(dev); dm_init_bandwidth_autoswitch(dev); @@ -317,7 +292,6 @@ extern void deinit_hal_dm(struct net_device *dev) -#ifdef RTL8192SU //#if 0 extern void hal_dm_watchdog(struct net_device *dev) { @@ -372,31 +346,6 @@ extern void hal_dm_watchdog(struct net_device *dev) dm_ctstoself(dev); } //HalDmWatchDog -#else -extern void hal_dm_watchdog(struct net_device *dev) -{ - //struct r8192_priv *priv = ieee80211_priv(dev); - - //static u8 previous_bssid[6] ={0}; - - /*Add by amy 2008/05/15 ,porting from windows code.*/ - dm_check_rate_adaptive(dev); - dm_dynamic_txpower(dev); - dm_check_txrateandretrycount(dev); - dm_check_txpower_tracking(dev); - dm_ctrl_initgain_byrssi(dev); - dm_check_edca_turbo(dev); - dm_bandwidth_autoswitch(dev); - dm_check_rfctrl_gpio(dev); - dm_check_rx_path_selection(dev); - dm_check_fsync(dev); - - // Add by amy 2008-05-15 porting from windows code. - dm_check_pbc_gpio(dev); - dm_send_rssi_tofw(dev); - dm_ctstoself(dev); -} //HalDmWatchDog -#endif /* * Decide Rate Adaptive Set according to distance (signal strength) @@ -1595,37 +1544,15 @@ static void dm_InitializeTXPowerTracking_TSSI(struct net_device *dev) } -#ifndef RTL8192SU -static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - - // Tx Power tracking by Theremal Meter require Firmware R/W 3-wire. This mechanism - // can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w - // 3-wire by driver cause RF goes into wrong state. - if(priv->ieee80211->FwRWRF) - priv->btxpower_tracking = TRUE; - else - priv->btxpower_tracking = FALSE; - priv->txpower_count = 0; - priv->btxpower_trackingInit = FALSE; -} -#endif void dm_initialize_txpower_tracking(struct net_device *dev) { #if (defined RTL8190P) dm_InitializeTXPowerTracking_TSSI(dev); -#elif (defined RTL8192SU) +#else // 2009/01/12 MH Enable for 92S series channel 1-14 CCK tx pwer setting for MP. // dm_InitializeTXPowerTracking_TSSI(dev); -#else - struct r8192_priv *priv = ieee80211_priv(dev); - if(priv->bDcut == TRUE) - dm_InitializeTXPowerTracking_TSSI(dev); - else - dm_InitializeTXPowerTracking_ThermalMeter(dev); #endif }// dm_InitializeTXPowerTracking @@ -1683,17 +1610,10 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev) //Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash //actually write reg0x02 bit1=0, then bit1=1. //DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n"); -#ifdef RTL8192SU rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4d); rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4f); rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4d); rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4f); -#else - rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); - rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f); - rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); - rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f); -#endif TM_Trigger = 1; return; } @@ -2021,14 +1941,12 @@ extern void dm_change_dynamic_initgain_thresh(struct net_device *dev, u32 dm_type, u32 dm_value) { -#ifdef RTL8192SU struct r8192_priv *priv = ieee80211_priv(dev); if(dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH) priv->MidHighPwrTHR_L2 = (u8)dm_value; else if(dm_type == DIG_TYPE_THRESH_HIGHPWR_LOW) priv->MidHighPwrTHR_L1 = (u8)dm_value; return; -#endif if (dm_type == DIG_TYPE_THRESH_HIGH) { dm_digtable.rssi_high_thresh = dm_value; @@ -2400,15 +2318,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( { /* 2008/01/11 MH 40MHZ 90/92 register are not the same. */ // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. -#ifdef RTL8192SU rtl8192_setBBreg(dev, (rOFDM0_XATxAFE+3), bMaskByte0, 0x00); -#else - #ifdef RTL8190P - write_nic_byte(dev, rOFDM0_RxDetector1, 0x40); - #else - write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00); - #endif -#endif /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40); */ @@ -2552,15 +2462,7 @@ static void dm_ctrl_initgain_byrssi_highpwr( // 3.1 Higher PD_TH for OFDM for high power state. if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) { -#ifdef RTL8192SU rtl8192_setBBreg(dev, (rOFDM0_XATxAFE+3), bMaskByte0, 0x10); -#else - #ifdef RTL8190P - write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); - #else - write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10); - #endif -#endif /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); */ @@ -2727,15 +2629,7 @@ static void dm_pd_th( { /* 2008/01/11 MH 40MHZ 90/92 register are not the same. */ // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. -#ifdef RTL8192SU rtl8192_setBBreg(dev, (rOFDM0_XATxAFE+3), bMaskByte0, 0x00); -#else - #ifdef RTL8190P - write_nic_byte(dev, rOFDM0_RxDetector1, 0x40); - #else - write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00); - #endif -#endif /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) write_nic_byte(dev, rOFDM0_RxDetector1, 0x40); */ @@ -2899,7 +2793,6 @@ static void dm_check_edca_turbo( { curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt; curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt; -#ifdef RTL8192SU // Modify EDCA parameters selection bias // For some APs, use downlink EDCA parameters for uplink+downlink if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_EDCA_BIAS_ON_RX) @@ -2942,31 +2835,6 @@ static void dm_check_edca_turbo( } priv->bcurrent_turbo_EDCA = true; } -#else - // For RT-AP, we needs to turn it on when Rx>Tx - if(curRxOkCnt > 4*curTxOkCnt) - { - //printk("%s():curRxOkCnt > 4*curTxOkCnt\n"); - if(!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA) - { - write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]); - priv->bis_cur_rdlstate = true; - } - } - else - { - - //printk("%s():curRxOkCnt < 4*curTxOkCnt\n"); - if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA) - { - write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]); - priv->bis_cur_rdlstate = false; - } - - } - - priv->bcurrent_turbo_EDCA = true; -#endif } else { @@ -3212,9 +3080,7 @@ static void dm_check_rfctrl_gpio(struct net_device * dev) #ifdef RTL8192U return; #endif -#ifdef RTL8192SU return; -#endif #ifdef RTL8192E queue_delayed_work(priv->priv_wq,&priv->gpio_change_rf_wq,0); #endif @@ -3257,7 +3123,6 @@ static void dm_check_pbc_gpio(struct net_device *dev) priv->bpbc_pressed = true; } #endif -#ifdef RTL8192SU struct r8192_priv *priv = ieee80211_priv(dev); u8 tmp1byte; @@ -3283,7 +3148,6 @@ static void dm_check_pbc_gpio(struct net_device *dev) priv->bpbc_pressed = true; } -#endif } @@ -3862,15 +3726,7 @@ extern void dm_fsync_timer_callback(unsigned long data) write_nic_byte(dev, 0xC3e, 0x96); } priv->ContiuneDiffCount = 0; -#ifdef RTL8192SU rtl8192_setBBreg(dev, rOFDM0_RxDetector2, bMaskDWord, 0x164052cd); -#else - #ifdef RTL8190P - write_nic_dword(dev, rOFDM0_RxDetector2, 0x164052cd); - #else - write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd); - #endif -#endif } RT_TRACE(COMP_HALDM, "ContiuneDiffCount %d\n", priv->ContiuneDiffCount); RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync); @@ -4283,16 +4139,6 @@ static void dm_dynamic_txpower(struct net_device *dev) (priv->bDynamicTxLowPower != priv->bLastDTPFlag_Low ) ) { RT_TRACE(COMP_TXAGC,"SetTxPowerLevel8190() channel = %d \n" , priv->ieee80211->current_network.channel); -#ifndef RTL8192SU -#if defined(RTL8190P) || defined(RTL8192E) - SetTxPowerLevel8190(Adapter,pHalData->CurrentChannel); -#endif - -#ifdef RTL8192U - rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel); - //pHalData->bStartTxCtrlByTPCNFR = FALSE; //Clear th flag of Set TX Power from Sitesurvey -#endif -#endif } priv->bLastDTPFlag_High = priv->bDynamicTxHighPower; priv->bLastDTPFlag_Low = priv->bDynamicTxLowPower; @@ -4306,11 +4152,7 @@ static void dm_check_txrateandretrycount(struct net_device * dev) struct ieee80211_device* ieee = priv->ieee80211; //for 11n tx rate // priv->stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg); -#ifdef RTL8192SU ieee->softmac_stats.CurrentShowTxate = read_nic_byte(dev, TX_RATE_REG); -#else - ieee->softmac_stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg); -#endif //printk("=============>tx_rate_reg:%x\n", ieee->softmac_stats.CurrentShowTxate); //for initial tx rate // priv->stats.last_packet_rate = read_nic_byte(dev, Initial_Tx_Rate_Reg); @@ -4322,24 +4164,6 @@ static void dm_check_txrateandretrycount(struct net_device * dev) static void dm_send_rssi_tofw(struct net_device *dev) { -#ifndef RTL8192SU - DCMD_TXCMD_T tx_cmd; - struct r8192_priv *priv = ieee80211_priv(dev); - - // If we test chariot, we should stop the TX command ? - // Because 92E will always silent reset when we send tx command. We use register - // 0x1e0(byte) to botify driver. - write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb); - return; -#if 1 - tx_cmd.Op = TXCMD_SET_RX_RSSI; - tx_cmd.Length = 4; - tx_cmd.Value = priv->undecorated_smoothed_pwdb; - - cmpk_message_handle_tx(dev, (u8*)&tx_cmd, - DESC_PACKET_TYPE_INIT, sizeof(DCMD_TXCMD_T)); -#endif -#endif } #ifdef TO_DO_LIST diff --git a/drivers/staging/rtl8192su/r8192U_wx.c b/drivers/staging/rtl8192su/r8192U_wx.c index 8b566416d80..73c110b97d0 100644 --- a/drivers/staging/rtl8192su/r8192U_wx.c +++ b/drivers/staging/rtl8192su/r8192U_wx.c @@ -17,15 +17,9 @@ project Authors. */ -#ifdef RTL8192SU #include <linux/string.h> #include "r8192U.h" #include "r8192S_hw.h" -#else -#include <linux/string.h> -#include "r8192U.h" -#include "r8192U_hw.h" -#endif #include "ieee80211/dot11d.h" @@ -344,7 +338,6 @@ static int r8192_wx_force_reset(struct net_device *dev, } -#ifdef RTL8192SU static int r8191su_wx_get_firm_version(struct net_device *dev, struct iw_request_info *info, struct iw_param *wrqu, char *extra) @@ -360,7 +353,6 @@ static int r8191su_wx_get_firm_version(struct net_device *dev, up(&priv->wx_sem); return 0; } -#endif @@ -1232,14 +1224,12 @@ static const struct iw_priv_args r8192_private_args[] = { IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "forcereset" } -#ifdef RTL8192SU , { SIOCIWFIRSTPRIV + 0x5, IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT|IW_PRIV_SIZE_FIXED|1, "firm_ver" } -#endif }; @@ -1262,9 +1252,7 @@ static iw_handler r8192_private_handler[] = { #endif r8192_wx_force_reset, (iw_handler)NULL, -#ifdef RTL8192SU (iw_handler)r8191su_wx_get_firm_version, -#endif }; struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev) diff --git a/drivers/staging/rtl8192su/r819xU_cmdpkt.c b/drivers/staging/rtl8192su/r819xU_cmdpkt.c index c1149c6f77b..d0d536d3f97 100644 --- a/drivers/staging/rtl8192su/r819xU_cmdpkt.c +++ b/drivers/staging/rtl8192su/r819xU_cmdpkt.c @@ -108,84 +108,7 @@ SendTxCommandPacket( { bool rt_status = true; -#ifdef RTL8192SU return rt_status; -#else -#ifdef RTL8192U - return rt_status; -#else - struct r8192_priv *priv = ieee80211_priv(dev); - u16 frag_threshold; - u16 frag_length, frag_offset = 0; - //u16 total_size; - //int i; - - rt_firmware *pfirmware = priv->pFirmware; - struct sk_buff *skb; - unsigned char *seg_ptr; - cb_desc *tcb_desc; - u8 bLastIniPkt; - - firmware_init_param(dev); - //Fragmentation might be required - frag_threshold = pfirmware->cmdpacket_frag_thresold; - do { - if((buffer_len - frag_offset) > frag_threshold) { - frag_length = frag_threshold ; - bLastIniPkt = 0; - - } else { - frag_length = buffer_len - frag_offset; - bLastIniPkt = 1; - - } - - /* Allocate skb buffer to contain firmware info and tx descriptor info - * add 4 to avoid packet appending overflow. - * */ - #ifdef RTL8192U - skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4); - #else - skb = dev_alloc_skb(frag_length + 4); - #endif - memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev)); - tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE); - tcb_desc->queue_index = TXCMD_QUEUE; - tcb_desc->bCmdOrInit = packettype; - tcb_desc->bLastIniPkt = bLastIniPkt; - - #ifdef RTL8192U - skb_reserve(skb, USB_HWDESC_HEADER_LEN); - #endif - - seg_ptr = skb_put(skb, buffer_len); - /* - * Transform from little endian to big endian - * and pending zero - */ - memcpy(seg_ptr,codevirtualaddress,buffer_len); - tcb_desc->txbuf_size= (u16)buffer_len; - - - if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)|| - (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\ - (priv->ieee80211->queue_stop) ) { - RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n"); - skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb); - } else { - priv->ieee80211->softmac_hard_start_xmit(skb,dev); - } - - codevirtualaddress += frag_length; - frag_offset += frag_length; - - }while(frag_offset < buffer_len); - - return rt_status; - - -#endif -#endif } /* CMPK_Message_Handle_Tx */ /*----------------------------------------------------------------------------- |