aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/cpu-freq/user-guide.txt5
-rw-r--r--arch/i386/kernel/cpu/cpufreq/Kconfig3
-rw-r--r--arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c3
-rw-r--r--arch/i386/kernel/cpu/cpufreq/longhaul.c221
-rw-r--r--drivers/cpufreq/cpufreq.c75
5 files changed, 190 insertions, 117 deletions
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 7fedc00c3d3..555c8cf3650 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -153,10 +153,13 @@ scaling_governor, and by "echoing" the name of another
that some governors won't load - they only
work on some specific architectures or
processors.
-scaling_min_freq and
+scaling_min_freq and
scaling_max_freq show the current "policy limits" (in
kHz). By echoing new values into these
files, you can change these limits.
+ NOTE: when setting a policy you need to
+ first set scaling_max_freq, then
+ scaling_min_freq.
If you have selected the "userspace" governor which allows you to
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
index e44a4c6a4fe..ccc1edff5c9 100644
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -96,6 +96,7 @@ config X86_POWERNOW_K8_ACPI
config X86_GX_SUSPMOD
tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
+ depends on PCI
help
This add the CPUFreq driver for NatSemi Geode processors which
support suspend modulation.
@@ -202,7 +203,7 @@ config X86_LONGRUN
config X86_LONGHAUL
tristate "VIA Cyrix III Longhaul"
select CPU_FREQ_TABLE
- depends on BROKEN
+ depends on ACPI_PROCESSOR
help
This adds the CPUFreq driver for VIA Samuel/CyrixIII,
VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 567b39bea07..efb41e81351 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -384,8 +384,7 @@ static int acpi_cpufreq_early_init_acpi(void)
}
/* Do initialization in ACPI core */
- acpi_processor_preregister_performance(acpi_perf_data);
- return 0;
+ return acpi_processor_preregister_performance(acpi_perf_data);
}
static int
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index 146f607e9c4..4f2c3aeef72 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -29,11 +29,13 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/string.h>
-#include <linux/pci.h>
#include <asm/msr.h>
#include <asm/timex.h>
#include <asm/io.h>
+#include <asm/acpi.h>
+#include <linux/acpi.h>
+#include <acpi/processor.h>
#include "longhaul.h"
@@ -56,6 +58,8 @@ static int minvid, maxvid;
static unsigned int minmult, maxmult;
static int can_scale_voltage;
static int vrmrev;
+static struct acpi_processor *pr = NULL;
+static struct acpi_processor_cx *cx = NULL;
/* Module parameters */
static int dont_scale_voltage;
@@ -118,84 +122,65 @@ static int longhaul_get_cpu_mult(void)
return eblcr_table[invalue];
}
+/* For processor with BCR2 MSR */
-static void do_powersaver(union msr_longhaul *longhaul,
- unsigned int clock_ratio_index)
+static void do_longhaul1(int cx_address, unsigned int clock_ratio_index)
{
- struct pci_dev *dev;
- unsigned long flags;
- unsigned int tmp_mask;
- int version;
- int i;
- u16 pci_cmd;
- u16 cmd_state[64];
+ union msr_bcr2 bcr2;
+ u32 t;
- switch (cpu_model) {
- case CPU_EZRA_T:
- version = 3;
- break;
- case CPU_NEHEMIAH:
- version = 0xf;
- break;
- default:
- return;
- }
+ rdmsrl(MSR_VIA_BCR2, bcr2.val);
+ /* Enable software clock multiplier */
+ bcr2.bits.ESOFTBF = 1;
+ bcr2.bits.CLOCKMUL = clock_ratio_index;
- rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
- longhaul->bits.SoftBusRatio = clock_ratio_index & 0xf;
- longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
- longhaul->bits.EnableSoftBusRatio = 1;
- longhaul->bits.RevisionKey = 0;
+ /* Sync to timer tick */
+ safe_halt();
+ ACPI_FLUSH_CPU_CACHE();
+ /* Change frequency on next halt or sleep */
+ wrmsrl(MSR_VIA_BCR2, bcr2.val);
+ /* Invoke C3 */
+ inb(cx_address);
+ /* Dummy op - must do something useless after P_LVL3 read */
+ t = inl(acpi_fadt.xpm_tmr_blk.address);
+
+ /* Disable software clock multiplier */
+ local_irq_disable();
+ rdmsrl(MSR_VIA_BCR2, bcr2.val);
+ bcr2.bits.ESOFTBF = 0;
+ wrmsrl(MSR_VIA_BCR2, bcr2.val);
+}
- preempt_disable();
- local_irq_save(flags);
+/* For processor with Longhaul MSR */
- /*
- * get current pci bus master state for all devices
- * and clear bus master bit
- */
- dev = NULL;
- i = 0;
- do {
- dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
- if (dev != NULL) {
- pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
- cmd_state[i++] = pci_cmd;
- pci_cmd &= ~PCI_COMMAND_MASTER;
- pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
- }
- } while (dev != NULL);
+static void do_powersaver(int cx_address, unsigned int clock_ratio_index)
+{
+ union msr_longhaul longhaul;
+ u32 t;
- tmp_mask=inb(0x21); /* works on C3. save mask. */
- outb(0xFE,0x21); /* TMR0 only */
- outb(0xFF,0x80); /* delay */
+ rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+ longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
+ longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf;
+ longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
+ longhaul.bits.EnableSoftBusRatio = 1;
+ /* Sync to timer tick */
safe_halt();
- wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
- halt();
-
+ ACPI_FLUSH_CPU_CACHE();
+ /* Change frequency on next halt or sleep */
+ wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+ /* Invoke C3 */
+ inb(cx_address);
+ /* Dummy op - must do something useless after P_LVL3 read */
+ t = inl(acpi_fadt.xpm_tmr_blk.address);
+
+ /* Disable bus ratio bit */
local_irq_disable();
-
- outb(tmp_mask,0x21); /* restore mask */
-
- /* restore pci bus master state for all devices */
- dev = NULL;
- i = 0;
- do {
- dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
- if (dev != NULL) {
- pci_cmd = cmd_state[i++];
- pci_write_config_byte(dev, PCI_COMMAND, pci_cmd);
- }
- } while (dev != NULL);
- local_irq_restore(flags);
- preempt_enable();
-
- /* disable bus ratio bit */
- rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
- longhaul->bits.EnableSoftBusRatio = 0;
- longhaul->bits.RevisionKey = version;
- wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+ longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
+ longhaul.bits.EnableSoftBusRatio = 0;
+ longhaul.bits.EnableSoftBSEL = 0;
+ longhaul.bits.EnableSoftVID = 0;
+ wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
}
/**
@@ -209,9 +194,9 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
{
int speed, mult;
struct cpufreq_freqs freqs;
- union msr_longhaul longhaul;
- union msr_bcr2 bcr2;
static unsigned int old_ratio=-1;
+ unsigned long flags;
+ unsigned int pic1_mask, pic2_mask;
if (old_ratio == clock_ratio_index)
return;
@@ -234,6 +219,20 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
fsb, mult/10, mult%10, print_speed(speed/1000));
+ preempt_disable();
+ local_irq_save(flags);
+
+ pic2_mask = inb(0xA1);
+ pic1_mask = inb(0x21); /* works on C3. save mask. */
+ outb(0xFF,0xA1); /* Overkill */
+ outb(0xFE,0x21); /* TMR0 only */
+
+ /* Disable bus master arbitration */
+ if (pr->flags.bm_check) {
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
+ ACPI_MTX_DO_NOT_LOCK);
+ }
+
switch (longhaul_version) {
/*
@@ -245,20 +244,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
*/
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
- rdmsrl (MSR_VIA_BCR2, bcr2.val);
- /* Enable software clock multiplier */
- bcr2.bits.ESOFTBF = 1;
- bcr2.bits.CLOCKMUL = clock_ratio_index;
- local_irq_disable();
- wrmsrl (MSR_VIA_BCR2, bcr2.val);
- safe_halt();
-
- /* Disable software clock multiplier */
- rdmsrl (MSR_VIA_BCR2, bcr2.val);
- bcr2.bits.ESOFTBF = 0;
- local_irq_disable();
- wrmsrl (MSR_VIA_BCR2, bcr2.val);
- local_irq_enable();
+ do_longhaul1(cx->address, clock_ratio_index);
break;
/*
@@ -273,10 +259,22 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
* to work in practice.
*/
case TYPE_POWERSAVER:
- do_powersaver(&longhaul, clock_ratio_index);
+ do_powersaver(cx->address, clock_ratio_index);
break;
}
+ /* Enable bus master arbitration */
+ if (pr->flags.bm_check) {
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0,
+ ACPI_MTX_DO_NOT_LOCK);
+ }
+
+ outb(pic2_mask,0xA1); /* restore mask */
+ outb(pic1_mask,0x21);
+
+ local_irq_restore(flags);
+ preempt_enable();
+
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
@@ -324,9 +322,11 @@ static int guess_fsb(void)
static int __init longhaul_get_ranges(void)
{
unsigned long invalue;
- unsigned int multipliers[32]= {
- 50,30,40,100,55,35,45,95,90,70,80,60,120,75,85,65,
- -1,110,120,-1,135,115,125,105,130,150,160,140,-1,155,-1,145 };
+ unsigned int ezra_t_multipliers[32]= {
+ 90, 30, 40, 100, 55, 35, 45, 95,
+ 50, 70, 80, 60, 120, 75, 85, 65,
+ -1, 110, 120, -1, 135, 115, 125, 105,
+ 130, 150, 160, 140, -1, 155, -1, 145 };
unsigned int j, k = 0;
union msr_longhaul longhaul;
unsigned long lo, hi;
@@ -355,13 +355,13 @@ static int __init longhaul_get_ranges(void)
invalue = longhaul.bits.MaxMHzBR;
if (longhaul.bits.MaxMHzBR4)
invalue += 16;
- maxmult=multipliers[invalue];
+ maxmult=ezra_t_multipliers[invalue];
invalue = longhaul.bits.MinMHzBR;
if (longhaul.bits.MinMHzBR4 == 1)
minmult = 30;
else
- minmult = multipliers[invalue];
+ minmult = ezra_t_multipliers[invalue];
fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
break;
}
@@ -527,6 +527,18 @@ static unsigned int longhaul_get(unsigned int cpu)
return calc_speed(longhaul_get_cpu_mult());
}
+static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
+ u32 nesting_level,
+ void *context, void **return_value)
+{
+ struct acpi_device *d;
+
+ if ( acpi_bus_get_device(obj_handle, &d) ) {
+ return 0;
+ }
+ *return_value = (void *)acpi_driver_data(d);
+ return 1;
+}
static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
{
@@ -534,6 +546,15 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
char *cpuname=NULL;
int ret;
+ /* Check ACPI support for C3 state */
+ acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX,
+ &longhaul_walk_callback, NULL, (void *)&pr);
+ if (pr == NULL) goto err_acpi;
+
+ cx = &pr->power.states[ACPI_STATE_C3];
+ if (cx->address == 0 || cx->latency > 1000) goto err_acpi;
+
+ /* Now check what we have on this motherboard */
switch (c->x86_model) {
case 6:
cpu_model = CPU_SAMUEL;
@@ -634,6 +655,10 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu);
return 0;
+
+err_acpi:
+ printk(KERN_ERR PFX "No ACPI support for CPU frequency changes.\n");
+ return -ENODEV;
}
static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
@@ -666,6 +691,18 @@ static int __init longhaul_init(void)
if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
return -ENODEV;
+#ifdef CONFIG_SMP
+ if (num_online_cpus() > 1) {
+ return -ENODEV;
+ printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n");
+ }
+#endif
+#ifdef CONFIG_X86_IO_APIC
+ if (cpu_has_apic) {
+ printk(KERN_ERR PFX "APIC detected. Longhaul is currently broken in this configuration.\n");
+ return -ENODEV;
+ }
+#endif
switch (c->x86_model) {
case 6 ... 9:
return cpufreq_register_driver(&longhaul_driver);
@@ -699,6 +736,6 @@ MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
MODULE_LICENSE ("GPL");
-module_init(longhaul_init);
+late_initcall(longhaul_init);
module_exit(longhaul_exit);
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index bc1088d9b37..b3df613ae4e 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -284,39 +284,69 @@ EXPORT_SYMBOL_GPL(cpufreq_notify_transition);
* SYSFS INTERFACE *
*********************************************************************/
+static struct cpufreq_governor *__find_governor(const char *str_governor)
+{
+ struct cpufreq_governor *t;
+
+ list_for_each_entry(t, &cpufreq_governor_list, governor_list)
+ if (!strnicmp(str_governor,t->name,CPUFREQ_NAME_LEN))
+ return t;
+
+ return NULL;
+}
+
/**
* cpufreq_parse_governor - parse a governor string
*/
static int cpufreq_parse_governor (char *str_governor, unsigned int *policy,
struct cpufreq_governor **governor)
{
+ int err = -EINVAL;
+
if (!cpufreq_driver)
- return -EINVAL;
+ goto out;
+
if (cpufreq_driver->setpolicy) {
if (!strnicmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
*policy = CPUFREQ_POLICY_PERFORMANCE;
- return 0;
+ err = 0;
} else if (!strnicmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) {
*policy = CPUFREQ_POLICY_POWERSAVE;
- return 0;
+ err = 0;
}
- return -EINVAL;
- } else {
+ } else if (cpufreq_driver->target) {
struct cpufreq_governor *t;
+
mutex_lock(&cpufreq_governor_mutex);
- if (!cpufreq_driver || !cpufreq_driver->target)
- goto out;
- list_for_each_entry(t, &cpufreq_governor_list, governor_list) {
- if (!strnicmp(str_governor,t->name,CPUFREQ_NAME_LEN)) {
- *governor = t;
+
+ t = __find_governor(str_governor);
+
+ if (t == NULL) {
+ char *name = kasprintf(GFP_KERNEL, "cpufreq_%s", str_governor);
+
+ if (name) {
+ int ret;
+
mutex_unlock(&cpufreq_governor_mutex);
- return 0;
+ ret = request_module(name);
+ mutex_lock(&cpufreq_governor_mutex);
+
+ if (ret == 0)
+ t = __find_governor(str_governor);
}
+
+ kfree(name);
}
-out:
+
+ if (t != NULL) {
+ *governor = t;
+ err = 0;
+ }
+
mutex_unlock(&cpufreq_governor_mutex);
}
- return -EINVAL;
+ out:
+ return err;
}
@@ -1265,23 +1295,21 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event)
int cpufreq_register_governor(struct cpufreq_governor *governor)
{
- struct cpufreq_governor *t;
+ int err;
if (!governor)
return -EINVAL;
mutex_lock(&cpufreq_governor_mutex);
- list_for_each_entry(t, &cpufreq_governor_list, governor_list) {
- if (!strnicmp(governor->name,t->name,CPUFREQ_NAME_LEN)) {
- mutex_unlock(&cpufreq_governor_mutex);
- return -EBUSY;
- }
+ err = -EBUSY;
+ if (__find_governor(governor->name) == NULL) {
+ err = 0;
+ list_add(&governor->governor_list, &cpufreq_governor_list);
}
- list_add(&governor->governor_list, &cpufreq_governor_list);
mutex_unlock(&cpufreq_governor_mutex);
- return 0;
+ return err;
}
EXPORT_SYMBOL_GPL(cpufreq_register_governor);
@@ -1343,6 +1371,11 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data, struct cpufreq_poli
memcpy(&policy->cpuinfo, &data->cpuinfo, sizeof(struct cpufreq_cpuinfo));
+ if (policy->min > data->min && policy->min > policy->max) {
+ ret = -EINVAL;
+ goto error_out;
+ }
+
/* verify the cpu speed can be set within this limit */
ret = cpufreq_driver->verify(policy);
if (ret)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 14:06:18 +0000