diff options
116 files changed, 6069 insertions, 4804 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4d175c75124..a57c1f216b2 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -35,6 +35,7 @@ parameter is applicable: APIC APIC support is enabled. APM Advanced Power Management support is enabled. AX25 Appropriate AX.25 support is enabled. + BLACKFIN Blackfin architecture is enabled. DRM Direct Rendering Management support is enabled. EDD BIOS Enhanced Disk Drive Services (EDD) is enabled EFI EFI Partitioning (GPT) is enabled @@ -550,7 +551,7 @@ and is between 256 and 4096 characters. It is defined in the file dtc3181e= [HW,SCSI] - earlyprintk= [X86-32,X86-64,SH] + earlyprintk= [X86-32,X86-64,SH,BLACKFIN] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] diff --git a/MAINTAINERS b/MAINTAINERS index 0df29ce05e5..22497de381d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -718,34 +718,8 @@ M: rpurdie@rpsys.net S: Maintained BLACKFIN ARCHITECTURE -P: Aubrey Li -M: aubrey.li@analog.com -P: Bernd Schmidt -M: bernd.schmidt@analog.com P: Bryan Wu M: bryan.wu@analog.com -P: Grace Pan -M: grace.pan@analog.com -P: Marc Hoffman -M: marc.hoffman@analog.com -P: Michael Hennerich -M: michael.hennerich@analog.com -P: Mike Frysinger -M: michael.frysinger@analog.com -P: Jerry Zeng -M: jerry.zeng@analog.com -P: Jie Zhang -M: jie.zhang@analog.com -P: Robin Getz -M: robin.getz@analog.com -P: Roy Huang -M: roy.huang@analog.com -P: Sonic Zhang -M: sonic.zhang@analog.com -P: Vivi Li -M: vivi.li@analog.com -P: Yi Li -M: yi.li@analog.com L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 017defaa525..b24f4535ffe 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -57,7 +57,7 @@ config GENERIC_TIME bool default n -config GENERIC_CALIBRATE_DELAY +config GENERIC_GPIO bool default y @@ -323,7 +323,7 @@ config CMDLINE to the kernel, you may specify one here. As a minimum, you should specify the memory size and the root device (e.g., mem=8M, root=/dev/nfs). -comment "Board Setup" +comment "Clock/PLL Setup" config CLKIN_HZ int "Crystal Frequency in Hz" @@ -335,6 +335,118 @@ config CLKIN_HZ help The frequency of CLKIN crystal oscillator on the board in Hz. +config BFIN_KERNEL_CLOCK + bool "Re-program Clocks while Kernel boots?" + default n + help + This option decides if kernel clocks are re-programed from the + bootloader settings. If the clocks are not set, the SDRAM settings + are also not changed, and the Bootloader does 100% of the hardware + configuration. + +config PLL_BYPASS + bool "Bypass PLL" + depends on BFIN_KERNEL_CLOCK + default n + +config CLKIN_HALF + bool "Half Clock In" + depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS) + default n + help + If this is set the clock will be divided by 2, before it goes to the PLL. + +config VCO_MULT + int "VCO Multiplier" + depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS) + range 1 64 + default "22" if BFIN533_EZKIT + default "45" if BFIN533_STAMP + default "20" if BFIN537_STAMP + default "22" if BFIN533_BLUETECHNIX_CM + default "20" if BFIN537_BLUETECHNIX_CM + default "20" if BFIN561_BLUETECHNIX_CM + default "20" if BFIN561_EZKIT + help + This controls the frequency of the on-chip PLL. This can be between 1 and 64. + PLL Frequency = (Crystal Frequency) * (this setting) + +choice + prompt "Core Clock Divider" + depends on BFIN_KERNEL_CLOCK + default CCLK_DIV_1 + help + This sets the frequency of the core. It can be 1, 2, 4 or 8 + Core Frequency = (PLL frequency) / (this setting) + +config CCLK_DIV_1 + bool "1" + +config CCLK_DIV_2 + bool "2" + +config CCLK_DIV_4 + bool "4" + +config CCLK_DIV_8 + bool "8" +endchoice + +config SCLK_DIV + int "System Clock Divider" + depends on BFIN_KERNEL_CLOCK + range 1 15 + default 5 if BFIN533_EZKIT + default 5 if BFIN533_STAMP + default 4 if BFIN537_STAMP + default 5 if BFIN533_BLUETECHNIX_CM + default 4 if BFIN537_BLUETECHNIX_CM + default 4 if BFIN561_BLUETECHNIX_CM + default 5 if BFIN561_EZKIT + help + This sets the frequency of the system clock (including SDRAM or DDR). + This can be between 1 and 15 + System Clock = (PLL frequency) / (this setting) + +# +# Max & Min Speeds for various Chips +# +config MAX_VCO_HZ + int + default 600000000 if BF522 + default 600000000 if BF525 + default 600000000 if BF527 + default 400000000 if BF531 + default 400000000 if BF532 + default 750000000 if BF533 + default 500000000 if BF534 + default 400000000 if BF536 + default 600000000 if BF537 + default 533000000 if BF538 + default 533000000 if BF539 + default 600000000 if BF542 + default 533000000 if BF544 + default 533000000 if BF549 + default 600000000 if BF561 + +config MIN_VCO_HZ + int + default 50000000 + +config MAX_SCLK_HZ + int + default 133000000 + +config MIN_SCLK_HZ + int + default 27000000 + +comment "Kernel Timer/Scheduler" + +source kernel/Kconfig.hz + +comment "Memory Setup" + config MEM_SIZE int "SDRAM Memory Size in MBytes" default 32 if BFIN533_EZKIT @@ -364,15 +476,16 @@ config ENET_FLASH_PIN config BOOT_LOAD hex "Kernel load address for booting" default "0x1000" + range 0x1000 0x20000000 help This option allows you to set the load address of the kernel. This can be useful if you are on a board which has a small amount of memory or you wish to reserve some memory at the beginning of the address space. - Note that you generally want to keep this value at or above 4k - (0x1000) as this will allow the kernel to capture NULL pointer - references. + Note that you need to keep this value above 4k (0x1000) as this + memory region is used to capture NULL pointer references as well + as some core kernel functions. comment "LED Status Indicators" depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) @@ -408,6 +521,52 @@ config BFIN_IDLE_LED_NUM help Select the LED (marked on the board) for you to blink. +choice + prompt "Blackfin Exception Scratch Register" + default BFIN_SCRATCH_REG_RETN + help + Select the resource to reserve for the Exception handler: + - RETN: Non-Maskable Interrupt (NMI) + - RETE: Exception Return (JTAG/ICE) + - CYCLES: Performance counter + + If you are unsure, please select "RETN". + +config BFIN_SCRATCH_REG_RETN + bool "RETN" + help + Use the RETN register in the Blackfin exception handler + as a stack scratch register. This means you cannot + safely use NMI on the Blackfin while running Linux, but + you can debug the system with a JTAG ICE and use the + CYCLES performance registers. + + If you are unsure, please select "RETN". + +config BFIN_SCRATCH_REG_RETE + bool "RETE" + help + Use the RETE register in the Blackfin exception handler + as a stack scratch register. This means you cannot + safely use a JTAG ICE while debugging a Blackfin board, + but you can safely use the CYCLES performance registers + and the NMI. + + If you are unsure, please select "RETN". + +config BFIN_SCRATCH_REG_CYCLES + bool "CYCLES" + help + Use the CYCLES register in the Blackfin exception handler + as a stack scratch register. This means you cannot + safely use the CYCLES performance registers on a Blackfin + board at anytime, but you can debug the system with a JTAG + ICE and use the NMI. + + If you are unsure, please select "RETN". + +endchoice + # # Sorry - but you need to put the hex address here - # @@ -448,10 +607,6 @@ endmenu menu "Blackfin Kernel Optimizations" -comment "Timer Tick" - -source kernel/Kconfig.hz - comment "Memory Optimizations" config I_ENTRY_L1 @@ -614,22 +769,22 @@ endchoice comment "Cache Support" -config BLKFIN_CACHE +config BFIN_ICACHE bool "Enable ICACHE" -config BLKFIN_DCACHE +config BFIN_DCACHE bool "Enable DCACHE" -config BLKFIN_DCACHE_BANKA +config BFIN_DCACHE_BANKA bool "Enable only 16k BankA DCACHE - BankB is SRAM" - depends on BLKFIN_DCACHE && !BF531 + depends on BFIN_DCACHE && !BF531 default n -config BLKFIN_CACHE_LOCK - bool "Enable Cache Locking" +config BFIN_ICACHE_LOCK + bool "Enable Instruction Cache Locking" choice prompt "Policy" - depends on BLKFIN_DCACHE - default BLKFIN_WB -config BLKFIN_WB + depends on BFIN_DCACHE + default BFIN_WB +config BFIN_WB bool "Write back" help Write Back Policy: @@ -646,7 +801,7 @@ config BLKFIN_WB If you are unsure of the options and you want to be safe, then go with Write Through. -config BLKFIN_WT +config BFIN_WT bool "Write through" help Write Back Policy: @@ -672,66 +827,9 @@ config L1_MAX_PIECE Set the max memory pieces for the L1 SRAM allocation algorithm. Min value is 16. Max value is 1024. -menu "Clock Settings" - - -config BFIN_KERNEL_CLOCK - bool "Re-program Clocks while Kernel boots?" - default n - help - This option decides if kernel clocks are re-programed from the - bootloader settings. If the clocks are not set, the SDRAM settings - are also not changed, and the Bootloader does 100% of the hardware - configuration. - -config VCO_MULT - int "VCO Multiplier" - depends on BFIN_KERNEL_CLOCK - default "22" if BFIN533_EZKIT - default "45" if BFIN533_STAMP - default "20" if BFIN537_STAMP - default "22" if BFIN533_BLUETECHNIX_CM - default "20" if BFIN537_BLUETECHNIX_CM - default "20" if BFIN561_BLUETECHNIX_CM - default "20" if BFIN561_EZKIT - -config CCLK_DIV - int "Core Clock Divider" - depends on BFIN_KERNEL_CLOCK - default 1 if BFIN533_EZKIT - default 1 if BFIN533_STAMP - default 1 if BFIN537_STAMP - default 1 if BFIN533_BLUETECHNIX_CM - default 1 if BFIN537_BLUETECHNIX_CM - default 1 if BFIN561_BLUETECHNIX_CM - default 1 if BFIN561_EZKIT - -config SCLK_DIV - int "System Clock Divider" - depends on BFIN_KERNEL_CLOCK - default 5 if BFIN533_EZKIT - default 5 if BFIN533_STAMP - default 4 if BFIN537_STAMP - default 5 if BFIN533_BLUETECHNIX_CM - default 4 if BFIN537_BLUETECHNIX_CM - default 4 if BFIN561_BLUETECHNIX_CM - default 5 if BFIN561_EZKIT - -config CLKIN_HALF - bool "Half ClockIn" - depends on BFIN_KERNEL_CLOCK - default n - -config PLL_BYPASS - bool "Bypass PLL" - depends on BFIN_KERNEL_CLOCK - default n - -endmenu - comment "Asynchonous Memory Configuration" -menu "EBIU_AMBCTL Global Control" +menu "EBIU_AMGCTL Global Control" config C_AMCKEN bool "Enable CLKOUT" default y @@ -941,24 +1039,6 @@ config DEBUG_ICACHE_CHECK also relocates the irq_panic() function to L1 memory, (which is un-cached). -config DEBUG_KERNEL_START - bool "Debug Kernel Startup" - depends on DEBUG_KERNEL - help - Say Y here to put in an mini-execption handler before the kernel - replaces the bootloader exception handler. This will stop kernels - from dieing at startup with no visible error messages. - -config DEBUG_SERIAL_EARLY_INIT - bool "Initialize serial driver early" - default n - depends on SERIAL_BFIN - help - Say Y here if you want to get kernel output early when kernel - crashes before the normal console initialization. If this option - is enable, console output will always go to the ttyBF0, no matter - what kernel boot paramters you set. - config DEBUG_HUNT_FOR_ZERO bool "Catch NULL pointer reads/writes" default y @@ -973,8 +1053,89 @@ config DEBUG_HUNT_FOR_ZERO Enabling this option will take up an extra entry in CPLB table. Otherwise, there is no extra overhead. +config DEBUG_BFIN_HWTRACE_ON + bool "Turn on Blackfin's Hardware Trace" + default y + help + All Blackfins include a Trace Unit which stores a history of the last + 16 changes in program flow taken by the program sequencer. The history + allows the user to recreate the program sequencer’s recent path. This + can be handy when an application dies - we print out the execution + path of how it got to the offending instruction. + + By turning this off, you may save a tiny amount of power. + +choice + prompt "Omit loop Tracing" + default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF + depends on DEBUG_BFIN_HWTRACE_ON + help + The trace buffer can be configured to omit recording of changes in + program flow that match either the last entry or one of the last + two entries. Omitting one of these entries from the record prevents + the trace buffer from overflowing because of any sort of loop (for, do + while, etc) in the program. + + Because zero-overhead Hardware loops are not recorded in the trace buffer, + this feature can be used to prevent trace overflow from loops that + are nested four deep. + +config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF + bool "Trace all Loops" + help + The trace buffer records all changes of flow + +config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE + bool "Compress single-level loops" + help + The trace buffer does not record single loops - helpful if trace + is spinning on a while or do loop. + +config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO + bool "Compress two-level loops" + help + The trace buffer does not record loops two levels deep. Helpful if + the trace is spinning in a nested loop + +endchoice + +config DEBUG_BFIN_HWTRACE_COMPRESSION + int + depends on DEBUG_BFIN_HWTRACE_ON + default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF + default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE + default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO + + +config DEBUG_BFIN_HWTRACE_EXPAND + bool "Expand Trace Buffer greater than 16 entries" + depends on DEBUG_BFIN_HWTRACE_ON + default n + help + By selecting this option, every time the 16 hardware entries in + the Blackfin's HW Trace buffer are full, the kernel will move them + into a software buffer, for dumping when there is an issue. This + has a great impact on performance, (an interrupt every 16 change of + flows) and should normally be turned off, except in those nasty + debugging sessions + +config DEBUG_BFIN_HWTRACE_EXPAND_LEN + int "Size of Trace buffer (in power of 2k)" + range 0 4 + depends on DEBUG_BFIN_HWTRACE_EXPAND + default 1 + help + This sets the size of the software buffer that the trace information + is kept in. + 0 for (2^0) 1k, or 256 entries, + 1 for (2^1) 2k, or 512 entries, + 2 for (2^2) 4k, or 1024 entries, + 3 for (2^3) 8k, or 2048 entries, + 4 for (2^4) 16k, or 4096 entries + config DEBUG_BFIN_NO_KERN_HWTRACE bool "Trace user apps (turn off hwtrace in kernel)" + depends on DEBUG_BFIN_HWTRACE_ON default n help Some pieces of the kernel contain a lot of flow changes which can @@ -985,6 +1146,20 @@ config DEBUG_BFIN_NO_KERN_HWTRACE Say Y here to disable hardware tracing in some known "jumpy" pieces of code so that the trace buffer will extend further back. +config EARLY_PRINTK + bool "Early printk" + default n + help + This option enables special console drivers which allow the kernel + to print messages very early in the bootup process. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. After enabling this + feature, you must add "earlyprintk=serial,uart0,57600" to the + command line (bootargs). It is safe to say Y here in all cases, as + all of this lives in the init section and is thrown away after the + kernel boots completely. + config DUAL_CORE_TEST_MODULE tristate "Dual Core Test Module" depends on (BF561) diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 1cf1ab28dc6..57f58d5cd47 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.22.6 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -58,15 +61,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -184,19 +192,17 @@ CONFIG_WDTIMER=13 # CONFIG_CMDLINE_BOOL is not set # -# Board Setup +# Clock/PLL Setup # CONFIG_CLKIN_HZ=27000000 -CONFIG_MEM_SIZE=32 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 - -# -# Blackfin Kernel Optimizations -# +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=750000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 # -# Timer Tick +# Kernel Timer/Scheduler # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -205,6 +211,20 @@ CONFIG_HZ_250=y CONFIG_HZ=250 # +# Memory Setup +# +CONFIG_MEM_SIZE=32 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# # Memory Optimizations # CONFIG_I_ENTRY_L1=y @@ -243,20 +263,15 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -# CONFIG_BLKFIN_WB is not set -CONFIG_BLKFIN_WT=y +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 # -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - -# # Asynchonous Memory Configuration # @@ -277,12 +292,13 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0xAAC3 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support @@ -290,10 +306,6 @@ CONFIG_BANK_3=0x99B3 # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF_FDPIC=y @@ -327,7 +339,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -368,20 +379,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -448,7 +447,16 @@ CONFIG_IRTTY_SIR=m # FIR device drivers # # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -466,10 +474,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -513,7 +517,6 @@ CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -550,16 +553,13 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -587,10 +587,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # @@ -599,10 +595,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -611,19 +603,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_MD is not set # -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# # Network device support # CONFIG_NETDEVICES=y @@ -631,10 +610,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -644,27 +619,15 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -688,6 +651,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=m # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -704,6 +668,7 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -718,7 +683,7 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BFIN_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -758,10 +723,6 @@ CONFIG_UNIX98_PTYS=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -773,7 +734,6 @@ CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set CONFIG_BLACKFIN_DPMC=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -781,10 +741,6 @@ CONFIG_BLACKFIN_DPMC=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -803,22 +759,22 @@ CONFIG_SPI_BFIN=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -830,16 +786,19 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -862,18 +821,17 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# USB Gadget Support # -# CONFIG_SPI_MMC is not set +# CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # @@ -913,17 +871,29 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set # -# RTC drivers +# Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# CONFIG_RTC_DRV_BFIN=y # @@ -940,14 +910,6 @@ CONFIG_RTC_DRV_BFIN=y # # -# Auxiliary Display support -# - -# -# Virtualization -# - -# # PBX support # # CONFIG_PBX is not set @@ -1047,6 +1009,7 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1124,14 +1087,20 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1154,6 +1123,7 @@ CONFIG_SECURITY_CAPABILITIES=m CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -1161,3 +1131,4 @@ CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 64b7f1b3b2a..306302baff0 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.22.6 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -58,15 +61,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -185,9 +193,27 @@ CONFIG_WDTIMER=13 # CONFIG_CMDLINE_BOOL is not set # -# Board Setup +# Clock/PLL Setup # CONFIG_CLKIN_HZ=11059200 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=750000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# CONFIG_MEM_SIZE=128 CONFIG_MEM_ADD_WIDTH=11 CONFIG_ENET_FLASH_PIN=0 @@ -198,6 +224,9 @@ CONFIG_BOOT_LOAD=0x1000 # # CONFIG_BFIN_ALIVE_LED is not set # CONFIG_BFIN_IDLE_LED is not set +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set CONFIG_BFIN_ALIVE_LED_PORT=0xFFC00700 CONFIG_BFIN_ALIVE_LED_DPORT=0xFFC00730 CONFIG_BFIN_IDLE_LED_PORT=0xFFC00700 @@ -208,15 +237,6 @@ CONFIG_BFIN_IDLE_LED_DPORT=0xFFC00730 # # -# Timer Tick -# -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 - -# # Memory Optimizations # CONFIG_I_ENTRY_L1=y @@ -255,20 +275,15 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -# CONFIG_BLKFIN_WB is not set -CONFIG_BLKFIN_WT=y +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 # -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - -# # Asynchonous Memory Configuration # @@ -289,12 +304,13 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0xAAC3 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support @@ -302,10 +318,6 @@ CONFIG_BANK_3=0x99B3 # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF_FDPIC=y @@ -339,7 +351,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -380,20 +391,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -460,7 +459,16 @@ CONFIG_IRTTY_SIR=m # FIR device drivers # # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -478,10 +486,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -525,7 +529,6 @@ CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -562,16 +565,13 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -599,10 +599,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # @@ -611,10 +607,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -623,19 +615,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_MD is not set # -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# # Network device support # CONFIG_NETDEVICES=y @@ -643,10 +622,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -656,27 +631,15 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -700,6 +663,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -716,8 +680,14 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set # CONFIG_BF53X_PFBUTTONS is not set CONFIG_TWI_KEYPAD=m @@ -734,7 +704,7 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39 # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BFIN_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -777,10 +747,6 @@ CONFIG_UNIX98_PTYS=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -792,7 +758,6 @@ CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set CONFIG_BLACKFIN_DPMC=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -800,11 +765,8 @@ CONFIG_BLACKFIN_DPMC=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # @@ -818,10 +780,11 @@ CONFIG_I2C_ALGOBIT=m # I2C Hardware Bus support # # CONFIG_I2C_BLACKFIN_GPIO is not set +# CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -857,18 +820,16 @@ CONFIG_SPI_BFIN=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -896,6 +857,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -920,22 +882,30 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set CONFIG_FB=m CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -957,10 +927,6 @@ CONFIG_ADV7393_1XMEM=y # CONFIG_ADV7393_2XMEM is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set # @@ -1001,7 +967,6 @@ CONFIG_SND_BLACKFIN_AD1836_TDM=y # CONFIG_SND_BLACKFIN_AD1836_I2S is not set CONFIG_SND_BLACKFIN_AD1836_MULSUB=y # CONFIG_SND_BLACKFIN_AD1836_5P1 is not set -CONFIG_SND_BLACKFIN_AD1981B=m CONFIG_SND_BLACKFIN_SPORT=0 CONFIG_SND_BLACKFIN_SPI_PFBIT=4 CONFIG_SND_BFIN_AD73311=m @@ -1009,11 +974,16 @@ CONFIG_SND_BFIN_SPORT=0 CONFIG_SND_BFIN_AD73311_SE=4 # -# SoC audio support +# System on Chip audio support # # CONFIG_SND_SOC is not set # +# SoC Audio for the ADI Blackfin +# +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1033,18 +1003,17 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# USB Gadget Support # -# CONFIG_SPI_MMC is not set +# CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # @@ -1084,44 +1053,50 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# # CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_V3020 is not set -CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients +# on-CPU RTC drivers # +CONFIG_RTC_DRV_BFIN=y # -# DMA Devices +# DMA Engine support # +# CONFIG_DMA_ENGINE is not set # -# Auxiliary Display support +# DMA Clients # # -# Virtualization +# DMA Devices # # @@ -1224,6 +1199,7 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1301,14 +1277,20 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1331,6 +1313,7 @@ CONFIG_SECURITY_CAPABILITIES=m CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -1338,3 +1321,4 @@ CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index ccf09dc09a1..828b604438e 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.22.6 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -58,15 +61,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -148,13 +156,6 @@ CONFIG_IRQ_PLL_WAKEUP=7 # # -# PORT F/G Selection -# -CONFIG_BF537_PORT_F=y -# CONFIG_BF537_PORT_G is not set -# CONFIG_BF537_PORT_H is not set - -# # Interrupt Priority Assignment # @@ -199,19 +200,17 @@ CONFIG_IRQ_WATCH=13 # CONFIG_CMDLINE_BOOL is not set # -# Board Setup +# Clock/PLL Setup # CONFIG_CLKIN_HZ=25000000 -CONFIG_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=10 -CONFIG_BOOT_LOAD=0x1000 - -# -# Blackfin Kernel Optimizations -# +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 # -# Timer Tick +# Kernel Timer/Scheduler # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -220,6 +219,20 @@ CONFIG_HZ_250=y CONFIG_HZ=250 # +# Memory Setup +# +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=10 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# # Memory Optimizations # CONFIG_I_ENTRY_L1=y @@ -258,20 +271,15 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -# CONFIG_BLKFIN_WB is not set -CONFIG_BLKFIN_WT=y +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 # -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - -# # Asynchonous Memory Configuration # @@ -298,6 +306,7 @@ CONFIG_BANK_3=0x99B3 # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support @@ -305,10 +314,6 @@ CONFIG_BANK_3=0x99B3 # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF_FDPIC=y @@ -342,7 +347,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -383,20 +387,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -463,7 +455,16 @@ CONFIG_IRTTY_SIR=m # FIR device drivers # # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -481,10 +482,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -528,7 +525,6 @@ CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -565,13 +561,10 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=m # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_BFIN=m CONFIG_BFIN_NAND_BASE=0x20212000 CONFIG_BFIN_NAND_CLE=2 @@ -580,11 +573,13 @@ CONFIG_BFIN_NAND_READY=3 CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -612,10 +607,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # @@ -624,10 +615,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -636,19 +623,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_MD is not set # -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# # Network device support # CONFIG_NETDEVICES=y @@ -656,11 +630,20 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +CONFIG_PHYLIB=y # -# PHY device support +# MII PHY device drivers # -# CONFIG_PHYLIB is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -674,27 +657,15 @@ CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_BFIN_MAC_RMII is not set # CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -718,6 +689,7 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -734,8 +706,14 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set # CONFIG_BF53X_PFBUTTONS is not set CONFIG_TWI_KEYPAD=m @@ -752,7 +730,7 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BFIN_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -803,10 +781,6 @@ CONFIG_CAN_BLACKFIN=m # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -818,7 +792,6 @@ CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set CONFIG_BLACKFIN_DPMC=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -826,11 +799,8 @@ CONFIG_BLACKFIN_DPMC=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # @@ -846,10 +816,11 @@ CONFIG_I2C_CHARDEV=m # CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -885,18 +856,16 @@ CONFIG_SPI_BFIN=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -924,6 +893,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -948,11 +918,8 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support @@ -960,12 +927,23 @@ CONFIG_HWMON=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=m CONFIG_LCD_CLASS_DEVICE=m + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set CONFIG_FB=m CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -991,10 +969,6 @@ CONFIG_LQ035_SLAVE_ADDR=0x58 # CONFIG_FB_BFIN_BGR is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set # @@ -1035,7 +1009,6 @@ CONFIG_SND_BLACKFIN_AD1836_TDM=y # CONFIG_SND_BLACKFIN_AD1836_I2S is not set CONFIG_SND_BLACKFIN_AD1836_MULSUB=y # CONFIG_SND_BLACKFIN_AD1836_5P1 is not set -CONFIG_SND_BLACKFIN_AD1981B=m CONFIG_SND_BLACKFIN_SPORT=0 CONFIG_SND_BLACKFIN_SPI_PFBIT=4 CONFIG_SND_BFIN_AD73311=m @@ -1043,11 +1016,16 @@ CONFIG_SND_BFIN_SPORT=0 CONFIG_SND_BFIN_AD73311_SE=4 # -# SoC audio support +# System on Chip audio support # # CONFIG_SND_SOC is not set # +# SoC Audio for the ADI Blackfin +# +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1067,18 +1045,17 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# USB Gadget Support # -# CONFIG_SPI_MMC is not set +# CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # @@ -1118,44 +1095,50 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# # CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_V3020 is not set -CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients +# on-CPU RTC drivers # +CONFIG_RTC_DRV_BFIN=y # -# DMA Devices +# DMA Engine support # +# CONFIG_DMA_ENGINE is not set # -# Auxiliary Display support +# DMA Clients # # -# Virtualization +# DMA Devices # # @@ -1258,6 +1241,7 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1335,14 +1319,20 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1365,6 +1355,7 @@ CONFIG_SECURITY_CAPABILITIES=m CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -1372,3 +1363,4 @@ CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index ac8390fafa9..e80f3d59c28 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.22.6 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -51,7 +54,6 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -59,14 +61,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 # CONFIG_NP2 is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -165,6 +173,7 @@ CONFIG_IRQ_UART1_TX=10 # # BF548 Specific Configuration # +# CONFIG_DEB_DMA_URGENT is not set # # Interrupt Priority Assignment @@ -242,24 +251,35 @@ CONFIG_IRQ_PINT2=11 CONFIG_IRQ_PINT3=11 # -# Board customizations +# Pin Interrupt to Port Assignment # -# CONFIG_CMDLINE_BOOL is not set # -# Board Setup +# Assignment # -CONFIG_CLKIN_HZ=25000000 -CONFIG_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=10 -CONFIG_BOOT_LOAD=0x1000 +CONFIG_PINTx_REASSIGN=y +CONFIG_PINT0_ASSIGN=0x00000101 +CONFIG_PINT1_ASSIGN=0x01010000 +CONFIG_PINT2_ASSIGN=0x07000101 +CONFIG_PINT3_ASSIGN=0x02020303 # -# Blackfin Kernel Optimizations +# Board customizations # +# CONFIG_CMDLINE_BOOL is not set # -# Timer Tick +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=533000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -268,6 +288,20 @@ CONFIG_HZ_250=y CONFIG_HZ=250 # +# Memory Setup +# +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=10 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# # Memory Optimizations # CONFIG_I_ENTRY_L1=y @@ -275,12 +309,12 @@ CONFIG_EXCPT_IRQ_SYSC_L1=y CONFIG_DO_IRQ_L1=y CONFIG_CORE_TIMER_IRQ_L1=y CONFIG_IDLE_L1=y -CONFIG_SCHEDULE_L1=y +# CONFIG_SCHEDULE_L1 is not set CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y -CONFIG_MEMSET_L1=y -CONFIG_MEMCPY_L1=y -CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_MEMSET_L1 is not set +# CONFIG_MEMCPY_L1 is not set +# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set # CONFIG_IP_CHECKSUM_L1 is not set CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set @@ -306,20 +340,15 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -# CONFIG_BLKFIN_WB is not set -CONFIG_BLKFIN_WT=y +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 # -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - -# # Asynchonous Memory Configuration # @@ -327,7 +356,6 @@ CONFIG_L1_MAX_PIECE=16 # EBIU_AMBCTL Global Control # CONFIG_C_AMCKEN=y -CONFIG_C_CDPRIO=y # CONFIG_C_AMBEN is not set # CONFIG_C_AMBEN_B0 is not set # CONFIG_C_AMBEN_B0_B1 is not set @@ -338,7 +366,7 @@ CONFIG_C_AMBEN_ALL=y # EBIU_AMBCTL Control # CONFIG_BANK_0=0x7BB0 -CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_1=0x5554 CONFIG_BANK_2=0x7BB0 CONFIG_BANK_3=0x99B3 @@ -346,6 +374,7 @@ CONFIG_BANK_3=0x99B3 # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support @@ -353,10 +382,6 @@ CONFIG_BANK_3=0x99B3 # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF_FDPIC=y @@ -383,7 +408,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -424,20 +448,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -463,7 +475,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -475,29 +496,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # # User Modules And Translation Layers # -# CONFIG_MTD_CHAR is not set +CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set @@ -509,8 +524,10 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -521,22 +538,32 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_MW320D is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x400000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_BF5xx is not set -CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -548,16 +575,23 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_BFIN is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_BF5XX=y +CONFIG_MTD_NAND_BF5XX_HWECC=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set # -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -585,41 +619,61 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # -# Serial ATA (prod) and Parallel ATA (experimental) drivers +# SCSI support type (disk, tape, CD-ROM) # -# CONFIG_ATA is not set +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # -# Multi-device support (RAID and LVM) +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -# CONFIG_MD is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# Fusion MPT device support +# SCSI Transports # -# CONFIG_FUSION is not set +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # -# IEEE 1394 (FireWire) support +# SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_PATA_PLATFORM is not set +CONFIG_PATA_BF54X=y +CONFIG_PATA_BF54X_DMA=y # -# I2O device support +# Multi-device support (RAID and LVM) # +# CONFIG_MD is not set # # Network device support @@ -629,10 +683,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -641,28 +691,16 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_SMC91X is not set -# CONFIG_SMSC911X is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# +CONFIG_SMSC911X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -686,6 +724,7 @@ CONFIG_MII=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -702,10 +741,17 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set # CONFIG_BF53X_PFBUTTONS is not set +# CONFIG_TWI_KEYPAD is not set # # Hardware I/O ports @@ -718,12 +764,15 @@ CONFIG_INPUT_MISC=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BFIN_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_TWI_LCD is not set +# CONFIG_AD5304 is not set +# CONFIG_BF5xx_TEA5764 is not set # CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -760,14 +809,9 @@ CONFIG_UNIX98_PTYS=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -775,32 +819,114 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set # -# I2C support +# I2C Hardware Bus support # -# CONFIG_I2C is not set +# CONFIG_I2C_BLACKFIN_GPIO is not set +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_SENSORS_PCA9543 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y # -# Dallas's 1-wire bus +# SPI Master Controller Drivers # -# CONFIG_W1 is not set +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set # -# Hardware Monitoring support +# Dallas's 1-wire bus # +# CONFIG_W1 is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -812,16 +938,19 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -844,6 +973,10 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # +# Enable Host or Gadget support to see Inventra options +# + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -851,11 +984,20 @@ CONFIG_USB_ARCH_HAS_HCD=y # USB Gadget Support # # CONFIG_USB_GADGET is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=m # -# MMC/SD Card support +# MMC/SD Host Controller Drivers # -# CONFIG_MMC is not set +CONFIG_SDH_BFIN=m +# CONFIG_SPI_MMC is not set # # LED devices @@ -894,15 +1036,37 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# CONFIG_RTC_DRV_BFIN=y # @@ -919,14 +1083,6 @@ CONFIG_RTC_DRV_BFIN=y # # -# Auxiliary Display support -# - -# -# Virtualization -# - -# # PBX support # # CONFIG_PBX is not set @@ -991,8 +1147,25 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -1040,36 +1213,20 @@ CONFIG_MSDOS_PARTITION=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -CONFIG_DEBUG_HWERR=y -# CONFIG_DEBUG_ICACHE_CHECK is not set -# CONFIG_DEBUG_KERNEL_START is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1092,9 +1249,12 @@ CONFIG_SECURITY_CAPABILITIES=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 51c0b6f9779..85e647f8775 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.22.6 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -58,15 +61,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -229,19 +237,17 @@ CONFIG_IRQ_WDTIMER=13 # CONFIG_CMDLINE_BOOL is not set # -# Board Setup +# Clock/PLL Setup # CONFIG_CLKIN_HZ=30000000 -CONFIG_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 - -# -# Blackfin Kernel Optimizations -# +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 # -# Timer Tick +# Kernel Timer/Scheduler # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -250,6 +256,20 @@ CONFIG_HZ_250=y CONFIG_HZ=250 # +# Memory Setup +# +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# # Memory Optimizations # CONFIG_I_ENTRY_L1=y @@ -288,20 +308,15 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -# CONFIG_BLKFIN_WB is not set -CONFIG_BLKFIN_WT=y +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 # -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - -# # Asynchonous Memory Configuration # @@ -326,12 +341,13 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0xAAC3 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support @@ -339,10 +355,6 @@ CONFIG_BANK_3=0x99B3 # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF_FDPIC=y @@ -364,7 +376,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -405,20 +416,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -485,7 +484,16 @@ CONFIG_IRTTY_SIR=m # FIR device drivers # # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -503,10 +511,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -550,7 +554,6 @@ CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -588,16 +591,13 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -625,10 +625,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # @@ -637,10 +633,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -649,19 +641,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_MD is not set # -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# # Network device support # CONFIG_NETDEVICES=y @@ -669,10 +648,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -682,27 +657,15 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -726,6 +689,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=m # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -742,6 +706,7 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -756,7 +721,7 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BFIN_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -796,10 +761,6 @@ CONFIG_UNIX98_PTYS=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -810,7 +771,6 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -818,10 +778,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -840,22 +796,22 @@ CONFIG_SPI_BFIN=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -867,16 +823,19 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -899,18 +858,17 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# USB Gadget Support # -# CONFIG_SPI_MMC is not set +# CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # @@ -953,14 +911,6 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# Auxiliary Display support -# - -# -# Virtualization -# - -# # PBX support # # CONFIG_PBX is not set @@ -1060,6 +1010,7 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1137,14 +1088,20 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y # CONFIG_DUAL_CORE_TEST_MODULE is not set CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1168,6 +1125,7 @@ CONFIG_SECURITY_CAPABILITIES=m CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -1175,3 +1133,4 @@ CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 983ed181c89..15e36aaf218 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.22.6 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -41,6 +42,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set @@ -57,15 +59,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=9 -CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -147,13 +154,6 @@ CONFIG_IRQ_PLL_WAKEUP=7 # # -# PORT F/G Selection -# -CONFIG_BF537_PORT_F=y -# CONFIG_BF537_PORT_G is not set -# CONFIG_BF537_PORT_H is not set - -# # Interrupt Priority Assignment # @@ -198,19 +198,17 @@ CONFIG_IRQ_WATCH=13 # CONFIG_CMDLINE_BOOL is not set # -# Board Setup +# Clock/PLL Setup # CONFIG_CLKIN_HZ=24576000 -CONFIG_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=10 -CONFIG_BOOT_LOAD=0x1000 - -# -# Blackfin Kernel Optimizations -# +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 # -# Timer Tick +# Kernel Timer/Scheduler # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -219,6 +217,20 @@ CONFIG_HZ_250=y CONFIG_HZ=250 # +# Memory Setup +# +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=10 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# # Memory Optimizations # CONFIG_I_ENTRY_L1=y @@ -257,20 +269,15 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -CONFIG_BLKFIN_WB=y -# CONFIG_BLKFIN_WT is not set +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set CONFIG_L1_MAX_PIECE=16 # -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - -# # Asynchonous Memory Configuration # @@ -297,6 +304,7 @@ CONFIG_BANK_3=0x99B3 # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support @@ -304,10 +312,6 @@ CONFIG_BANK_3=0x99B3 # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF_FDPIC=y @@ -334,7 +338,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -375,20 +378,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -414,7 +405,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -432,10 +432,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -473,7 +469,6 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -499,13 +494,10 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_BFIN=y CONFIG_BFIN_NAND_BASE=0x20100000 CONFIG_BFIN_NAND_CLE=2 @@ -514,11 +506,13 @@ CONFIG_BFIN_NAND_READY=44 CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -546,10 +540,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # @@ -558,10 +548,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -570,19 +556,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_MD is not set # -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# # Network device support # CONFIG_NETDEVICES=y @@ -590,11 +563,20 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +CONFIG_PHYLIB=y # -# PHY device support +# MII PHY device drivers # -# CONFIG_PHYLIB is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -608,27 +590,15 @@ CONFIG_BFIN_TX_DESC_NUM=100 CONFIG_BFIN_RX_DESC_NUM=100 CONFIG_BFIN_MAC_RMII=y # CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -652,6 +622,7 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -670,6 +641,7 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=y @@ -681,7 +653,13 @@ CONFIG_TOUCHSCREEN_AD7877=y # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=y # CONFIG_BF53X_PFBUTTONS is not set # CONFIG_TWI_KEYPAD is not set @@ -697,7 +675,7 @@ CONFIG_INPUT_UINPUT=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BFIN_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -749,14 +727,9 @@ CONFIG_CAN_BLACKFIN=m # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -764,11 +737,8 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -784,10 +754,11 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -823,18 +794,16 @@ CONFIG_SPI_BFIN=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -862,6 +831,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -886,11 +856,8 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support @@ -898,12 +865,23 @@ CONFIG_HWMON=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_LCD_CLASS_DEVICE=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -921,10 +899,6 @@ CONFIG_FB_BFIN_LANDSCAPE=y # CONFIG_FB_BFIN_BGR is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set # @@ -936,8 +910,6 @@ CONFIG_SOUND=y # Advanced Linux Sound Architecture # CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set @@ -959,19 +931,23 @@ CONFIG_SND_PCM=m # ALSA Blackfin devices # # CONFIG_SND_BLACKFIN_AD1836 is not set -CONFIG_SND_BLACKFIN_AD1981B=m # CONFIG_SND_BFIN_AD73311 is not set # -# SoC audio support +# System on Chip audio support # # CONFIG_SND_SOC is not set # +# SoC Audio for the ADI Blackfin +# +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set + +# # Open Sound System # CONFIG_SOUND_PRIME=y -# CONFIG_OBSOLETE_OSS is not set +# CONFIG_OSS_OBSOLETE is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set @@ -989,18 +965,17 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# USB Gadget Support # -# CONFIG_SPI_MMC is not set +# CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # @@ -1040,44 +1015,50 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# # CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_V3020 is not set -CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients +# on-CPU RTC drivers # +CONFIG_RTC_DRV_BFIN=y # -# DMA Devices +# DMA Engine support # +# CONFIG_DMA_ENGINE is not set # -# Auxiliary Display support +# DMA Clients # # -# Virtualization +# DMA Devices # # @@ -1176,6 +1157,7 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1256,11 +1238,17 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +# CONFIG_DEBUG_MMRS is not set # CONFIG_DEBUG_HUNT_FOR_ZERO is not set +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set # CONFIG_CPLB_INFO is not set # CONFIG_ACCESS_CHECK is not set @@ -1283,9 +1271,11 @@ CONFIG_SECURITY_CAPABILITIES=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index f429ebc3a96..8aeb6066b19 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -7,11 +7,10 @@ extra-y := init_task.o vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \ - fixed_code.o cplbinit.o cacheinit.o + fixed_code.o cplbinit.o cacheinit.o reboot.o bfin_gpio.o -obj-$(CONFIG_BF53x) += bfin_gpio.o -obj-$(CONFIG_BF561) += bfin_gpio.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o obj-$(CONFIG_KGDB) += kgdb.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 7cf02f02a1d..e19164fb4cd 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -73,6 +73,11 @@ static int __init blackfin_dma_init(void) /* Mark MEMDMA Channel 0 as requested since we're using it internally */ dma_ch[CH_MEM_STREAM0_DEST].chan_status = DMA_CHANNEL_REQUESTED; dma_ch[CH_MEM_STREAM0_SRC].chan_status = DMA_CHANNEL_REQUESTED; + +#if defined(CONFIG_DEB_DMA_URGENT) + bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() + | DEB1_URGENT | DEB2_URGENT | DEB3_URGENT); +#endif return 0; } @@ -265,10 +270,23 @@ void set_dma_next_desc_addr(unsigned int channel, unsigned long addr) dma_ch[channel].regs->next_desc_ptr = addr; SSYNC(); - pr_debug("set_dma_start_addr() : END\n"); + pr_debug("set_dma_next_desc_addr() : END\n"); } EXPORT_SYMBOL(set_dma_next_desc_addr); +void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr) +{ + pr_debug("set_dma_curr_desc_addr() : BEGIN \n"); + + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->curr_desc_ptr = addr; + SSYNC(); + pr_debug("set_dma_curr_desc_addr() : END\n"); +} +EXPORT_SYMBOL(set_dma_curr_desc_addr); + void set_dma_x_count(unsigned int channel, unsigned short x_count) { BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE @@ -345,6 +363,16 @@ void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg) } EXPORT_SYMBOL(set_dma_sg); +void set_dma_curr_addr(unsigned int channel, unsigned long addr) +{ + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->curr_addr_ptr = addr; + SSYNC(); +} +EXPORT_SYMBOL(set_dma_curr_addr); + /*------------------------------------------------------------------------------ * Get the DMA status of a specific DMA channel from the system. *-----------------------------------------------------------------------------*/ @@ -408,6 +436,10 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size) blackfin_dcache_flush_range((unsigned int)src, (unsigned int)(src + size)); + if ((unsigned long)dest < memory_end) + blackfin_dcache_invalidate_range((unsigned int)dest, + (unsigned int)(dest + size)); + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); if ((unsigned long)src < (unsigned long)dest) @@ -515,6 +547,8 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size) } } + SSYNC(); + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) ; @@ -524,9 +558,6 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size) bfin_write_MDMA_S0_CONFIG(0); bfin_write_MDMA_D0_CONFIG(0); - if ((unsigned long)dest < memory_end) - blackfin_dcache_invalidate_range((unsigned int)dest, - (unsigned int)(dest + size)); local_irq_restore(flags); return dest; @@ -555,13 +586,14 @@ void *safe_dma_memcpy(void *dest, const void *src, size_t size) } EXPORT_SYMBOL(safe_dma_memcpy); -void dma_outsb(void __iomem *addr, const void *buf, unsigned short len) +void dma_outsb(unsigned long addr, const void *buf, unsigned short len) { unsigned long flags; local_irq_save(flags); - blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len); + blackfin_dcache_flush_range((unsigned int)buf, + (unsigned int)(buf) + len); bfin_write_MDMA_D0_START_ADDR(addr); bfin_write_MDMA_D0_X_COUNT(len); @@ -576,6 +608,8 @@ void dma_outsb(void __iomem *addr, const void *buf, unsigned short len) bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8); bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8); + SSYNC(); + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); @@ -588,10 +622,13 @@ void dma_outsb(void __iomem *addr, const void *buf, unsigned short len) EXPORT_SYMBOL(dma_outsb); -void dma_insb(const void __iomem *addr, void *buf, unsigned short len) +void dma_insb(unsigned long addr, void *buf, unsigned short len) { unsigned long flags; + blackfin_dcache_invalidate_range((unsigned int)buf, + (unsigned int)(buf) + len); + local_irq_save(flags); bfin_write_MDMA_D0_START_ADDR(buf); bfin_write_MDMA_D0_X_COUNT(len); @@ -606,7 +643,7 @@ void dma_insb(const void __iomem *addr, void *buf, unsigned short len) bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8); bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8); - blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len); + SSYNC(); while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); @@ -619,13 +656,14 @@ void dma_insb(const void __iomem *addr, void *buf, unsigned short len) } EXPORT_SYMBOL(dma_insb); -void dma_outsw(void __iomem *addr, const void *buf, unsigned short len) +void dma_outsw(unsigned long addr, const void *buf, unsigned short len) { unsigned long flags; local_irq_save(flags); - blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len); + blackfin_dcache_flush_range((unsigned int)buf, + (unsigned int)(buf) + len * sizeof(short)); bfin_write_MDMA_D0_START_ADDR(addr); bfin_write_MDMA_D0_X_COUNT(len); @@ -640,6 +678,8 @@ void dma_outsw(void __iomem *addr, const void *buf, unsigned short len) bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); + SSYNC(); + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); @@ -651,10 +691,13 @@ void dma_outsw(void __iomem *addr, const void *buf, unsigned short len) } EXPORT_SYMBOL(dma_outsw); -void dma_insw(const void __iomem *addr, void *buf, unsigned short len) +void dma_insw(unsigned long addr, void *buf, unsigned short len) { unsigned long flags; + blackfin_dcache_invalidate_range((unsigned int)buf, + (unsigned int)(buf) + len * sizeof(short)); + local_irq_save(flags); bfin_write_MDMA_D0_START_ADDR(buf); @@ -670,7 +713,7 @@ void dma_insw(const void __iomem *addr, void *buf, unsigned short len) bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); - blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len); + SSYNC(); while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); @@ -683,13 +726,14 @@ void dma_insw(const void __iomem *addr, void *buf, unsigned short len) } EXPORT_SYMBOL(dma_insw); -void dma_outsl(void __iomem *addr, const void *buf, unsigned short len) +void dma_outsl(unsigned long addr, const void *buf, unsigned short len) { unsigned long flags; local_irq_save(flags); - blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len); + blackfin_dcache_flush_range((unsigned int)buf, + (unsigned int)(buf) + len * sizeof(long)); bfin_write_MDMA_D0_START_ADDR(addr); bfin_write_MDMA_D0_X_COUNT(len); @@ -704,6 +748,8 @@ void dma_outsl(void __iomem *addr, const void *buf, unsigned short len) bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32); bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32); + SSYNC(); + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); @@ -715,10 +761,13 @@ void dma_outsl(void __iomem *addr, const void *buf, unsigned short len) } EXPORT_SYMBOL(dma_outsl); -void dma_insl(const void __iomem *addr, void *buf, unsigned short len) +void dma_insl(unsigned long addr, void *buf, unsigned short len) { unsigned long flags; + blackfin_dcache_invalidate_range((unsigned int)buf, + (unsigned int)(buf) + len * sizeof(long)); + local_irq_save(flags); bfin_write_MDMA_D0_START_ADDR(buf); @@ -734,7 +783,7 @@ void dma_insl(const void __iomem *addr, void *buf, unsigned short len) bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32); bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32); - blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len); + SSYNC(); while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 5d488ef965c..3fe0cd49e8d 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -7,7 +7,7 @@ * Description: GPIO Abstraction Layer * * Modified: - * Copyright 2006 Analog Devices Inc. + * Copyright 2007 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -28,9 +28,9 @@ */ /* -* Number BF537/6/4 BF561 BF533/2/1 +* Number BF537/6/4 BF561 BF533/2/1 BF549/8/4/2 * -* GPIO_0 PF0 PF0 PF0 +* GPIO_0 PF0 PF0 PF0 PA0...PJ13 * GPIO_1 PF1 PF1 PF1 * GPIO_2 PF2 PF2 PF2 * GPIO_3 PF3 PF3 PF3 @@ -80,6 +80,7 @@ * GPIO_47 PH15 PF47 */ +#include <linux/delay.h> #include <linux/module.h> #include <linux/err.h> #include <asm/blackfin.h> @@ -87,6 +88,36 @@ #include <asm/portmux.h> #include <linux/irq.h> +#if ANOMALY_05000311 || ANOMALY_05000323 +enum { + AWA_data = SYSCR, + AWA_data_clear = SYSCR, + AWA_data_set = SYSCR, + AWA_toggle = SYSCR, + AWA_maska = UART_SCR, + AWA_maska_clear = UART_SCR, + AWA_maska_set = UART_SCR, + AWA_maska_toggle = UART_SCR, + AWA_maskb = UART_GCTL, + AWA_maskb_clear = UART_GCTL, + AWA_maskb_set = UART_GCTL, + AWA_maskb_toggle = UART_GCTL, + AWA_dir = SPORT1_STAT, + AWA_polar = SPORT1_STAT, + AWA_edge = SPORT1_STAT, + AWA_both = SPORT1_STAT, +#if ANOMALY_05000311 + AWA_inen = TIMER_ENABLE, +#elif ANOMALY_05000323 + AWA_inen = DMA1_1_CONFIG, +#endif +}; + /* Anomaly Workaround */ +#define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name) +#else +#define AWA_DUMMY_READ(...) do { } while (0) +#endif + #ifdef BF533_FAMILY static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { (struct gpio_port_t *) FIO_FLAG_D, @@ -116,11 +147,31 @@ static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { }; #endif +#ifdef BF548_FAMILY +static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { + (struct gpio_port_t *)PORTA_FER, + (struct gpio_port_t *)PORTB_FER, + (struct gpio_port_t *)PORTC_FER, + (struct gpio_port_t *)PORTD_FER, + (struct gpio_port_t *)PORTE_FER, + (struct gpio_port_t *)PORTF_FER, + (struct gpio_port_t *)PORTG_FER, + (struct gpio_port_t *)PORTH_FER, + (struct gpio_port_t *)PORTI_FER, + (struct gpio_port_t *)PORTJ_FER, +}; +#endif + static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)]; -char *str_ident = NULL; -#define RESOURCE_LABEL_SIZE 16 +#define MAX_RESOURCES 256 +#define RESOURCE_LABEL_SIZE 16 + +struct str_ident { + char name[RESOURCE_LABEL_SIZE]; +} *str_ident; + #ifdef CONFIG_PM static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; @@ -141,21 +192,32 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INT #endif /* CONFIG_PM */ +#if defined(BF548_FAMILY) +inline int check_gpio(unsigned short gpio) +{ + if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 + || gpio == GPIO_PH14 || gpio == GPIO_PH15 + || gpio == GPIO_PJ14 || gpio == GPIO_PJ15 + || gpio > MAX_BLACKFIN_GPIOS) + return -EINVAL; + return 0; +} +#else inline int check_gpio(unsigned short gpio) { if (gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; return 0; } +#endif static void set_label(unsigned short ident, const char *label) { if (label && str_ident) { - strncpy(str_ident + ident * RESOURCE_LABEL_SIZE, label, + strncpy(str_ident[ident].name, label, RESOURCE_LABEL_SIZE); - str_ident[ident * RESOURCE_LABEL_SIZE + - RESOURCE_LABEL_SIZE - 1] = 0; + str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0; } } @@ -164,14 +226,13 @@ static char *get_label(unsigned short ident) if (!str_ident) return "UNKNOWN"; - return (str_ident[ident * RESOURCE_LABEL_SIZE] ? - (str_ident + ident * RESOURCE_LABEL_SIZE) : "UNKNOWN"); + return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN"); } static int cmp_label(unsigned short ident, const char *label) { if (label && str_ident) - return strncmp(str_ident + ident * RESOURCE_LABEL_SIZE, + return strncmp(str_ident[ident].name, label, strlen(label)); else return -EINVAL; @@ -181,50 +242,84 @@ static int cmp_label(unsigned short ident, const char *label) static void port_setup(unsigned short gpio, unsigned short usage) { if (!check_gpio(gpio)) { - if (usage == GPIO_USAGE) { + if (usage == GPIO_USAGE) *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); - } else + else *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); SSYNC(); } } +#elif defined(BF548_FAMILY) +static void port_setup(unsigned short gpio, unsigned short usage) +{ + if (usage == GPIO_USAGE) + gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); + SSYNC(); +} #else # define port_setup(...) do { } while (0) #endif #ifdef BF537_FAMILY - -#define PMUX_LUT_RES 0 -#define PMUX_LUT_OFFSET 1 -#define PMUX_LUT_ENTRIES 41 -#define PMUX_LUT_SIZE 2 - -static unsigned short port_mux_lut[PMUX_LUT_ENTRIES][PMUX_LUT_SIZE] = { - {P_PPI0_D13, 11}, {P_PPI0_D14, 11}, {P_PPI0_D15, 11}, - {P_SPORT1_TFS, 11}, {P_SPORT1_TSCLK, 11}, {P_SPORT1_DTPRI, 11}, - {P_PPI0_D10, 10}, {P_PPI0_D11, 10}, {P_PPI0_D12, 10}, - {P_SPORT1_RSCLK, 10}, {P_SPORT1_RFS, 10}, {P_SPORT1_DRPRI, 10}, - {P_PPI0_D8, 9}, {P_PPI0_D9, 9}, {P_SPORT1_DRSEC, 9}, - {P_SPORT1_DTSEC, 9}, {P_TMR2, 8}, {P_PPI0_FS3, 8}, {P_TMR3, 7}, - {P_SPI0_SSEL4, 7}, {P_TMR4, 6}, {P_SPI0_SSEL5, 6}, {P_TMR5, 5}, - {P_SPI0_SSEL6, 5}, {P_UART1_RX, 4}, {P_UART1_TX, 4}, {P_TMR6, 4}, - {P_TMR7, 4}, {P_UART0_RX, 3}, {P_UART0_TX, 3}, {P_DMAR0, 3}, - {P_DMAR1, 3}, {P_SPORT0_DTSEC, 1}, {P_SPORT0_DRSEC, 1}, - {P_CAN0_RX, 1}, {P_CAN0_TX, 1}, {P_SPI0_SSEL7, 1}, - {P_SPORT0_TFS, 0}, {P_SPORT0_DTPRI, 0}, {P_SPI0_SSEL2, 0}, - {P_SPI0_SSEL3, 0} +static struct { + unsigned short res; + unsigned short offset; +} port_mux_lut[] = { + {.res = P_PPI0_D13, .offset = 11}, + {.res = P_PPI0_D14, .offset = 11}, + {.res = P_PPI0_D15, .offset = 11}, + {.res = P_SPORT1_TFS, .offset = 11}, + {.res = P_SPORT1_TSCLK, .offset = 11}, + {.res = P_SPORT1_DTPRI, .offset = 11}, + {.res = P_PPI0_D10, .offset = 10}, + {.res = P_PPI0_D11, .offset = 10}, + {.res = P_PPI0_D12, .offset = 10}, + {.res = P_SPORT1_RSCLK, .offset = 10}, + {.res = P_SPORT1_RFS, .offset = 10}, + {.res = P_SPORT1_DRPRI, .offset = 10}, + {.res = P_PPI0_D8, .offset = 9}, + {.res = P_PPI0_D9, .offset = 9}, + {.res = P_SPORT1_DRSEC, .offset = 9}, + {.res = P_SPORT1_DTSEC, .offset = 9}, + {.res = P_TMR2, .offset = 8}, + {.res = P_PPI0_FS3, .offset = 8}, + {.res = P_TMR3, .offset = 7}, + {.res = P_SPI0_SSEL4, .offset = 7}, + {.res = P_TMR4, .offset = 6}, + {.res = P_SPI0_SSEL5, .offset = 6}, + {.res = P_TMR5, .offset = 5}, + {.res = P_SPI0_SSEL6, .offset = 5}, + {.res = P_UART1_RX, .offset = 4}, + {.res = P_UART1_TX, .offset = 4}, + {.res = P_TMR6, .offset = 4}, + {.res = P_TMR7, .offset = 4}, + {.res = P_UART0_RX, .offset = 3}, + {.res = P_UART0_TX, .offset = 3}, + {.res = P_DMAR0, .offset = 3}, + {.res = P_DMAR1, .offset = 3}, + {.res = P_SPORT0_DTSEC, .offset = 1}, + {.res = P_SPORT0_DRSEC, .offset = 1}, + {.res = P_CAN0_RX, .offset = 1}, + {.res = P_CAN0_TX, .offset = 1}, + {.res = P_SPI0_SSEL7, .offset = 1}, + {.res = P_SPORT0_TFS, .offset = 0}, + {.res = P_SPORT0_DTPRI, .offset = 0}, + {.res = P_SPI0_SSEL2, .offset = 0}, + {.res = P_SPI0_SSEL3, .offset = 0}, }; static void portmux_setup(unsigned short per, unsigned short function) { - u16 y, muxreg, offset; + u16 y, offset, muxreg; - for (y = 0; y < PMUX_LUT_ENTRIES; y++) { - if (port_mux_lut[y][PMUX_LUT_RES] == per) { + for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) { + if (port_mux_lut[y].res == per) { /* SET PORTMUX REG */ - offset = port_mux_lut[y][PMUX_LUT_OFFSET]; + offset = port_mux_lut[y].offset; muxreg = bfin_read_PORT_MUX(); if (offset != 1) { @@ -238,18 +333,42 @@ static void portmux_setup(unsigned short per, unsigned short function) } } } +#elif defined(BF548_FAMILY) +inline void portmux_setup(unsigned short portno, unsigned short function) +{ + u32 pmux; + + pmux = gpio_array[gpio_bank(portno)]->port_mux; + + pmux &= ~(0x3 << (2 * gpio_sub_n(portno))); + pmux |= (function & 0x3) << (2 * gpio_sub_n(portno)); + gpio_array[gpio_bank(portno)]->port_mux = pmux; +} + +inline u16 get_portmux(unsigned short portno) +{ + u32 pmux; + + pmux = gpio_array[gpio_bank(portno)]->port_mux; + + return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); +} #else # define portmux_setup(...) do { } while (0) #endif +#ifndef BF548_FAMILY static void default_gpio(unsigned short gpio) { unsigned short bank, bitmask; + unsigned long flags; bank = gpio_bank(gpio); bitmask = gpio_bit(gpio); + local_irq_save(flags); + gpio_bankb[bank]->maska_clear = bitmask; gpio_bankb[bank]->maskb_clear = bitmask; SSYNC(); @@ -258,24 +377,32 @@ static void default_gpio(unsigned short gpio) gpio_bankb[bank]->polar &= ~bitmask; gpio_bankb[bank]->both &= ~bitmask; gpio_bankb[bank]->edge &= ~bitmask; + AWA_DUMMY_READ(edge); + local_irq_restore(flags); + } +#else +# define default_gpio(...) do { } while (0) +#endif static int __init bfin_gpio_init(void) { - - str_ident = kzalloc(RESOURCE_LABEL_SIZE * 256, GFP_KERNEL); - if (!str_ident) + str_ident = kcalloc(MAX_RESOURCES, + sizeof(struct str_ident), GFP_KERNEL); + if (str_ident == NULL) return -ENOMEM; + memset(str_ident, 0, MAX_RESOURCES * sizeof(struct str_ident)); + printk(KERN_INFO "Blackfin GPIO Controller\n"); return 0; } - arch_initcall(bfin_gpio_init); +#ifndef BF548_FAMILY /*********************************************************** * * FUNCTIONS: Blackfin General Purpose Ports Access Functions @@ -305,6 +432,7 @@ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ else \ gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ + AWA_DUMMY_READ(name); \ local_irq_restore(flags); \ } \ EXPORT_SYMBOL(set_gpio_ ## name); @@ -316,6 +444,22 @@ SET_GPIO(edge) SET_GPIO(both) +#if ANOMALY_05000311 || ANOMALY_05000323 +#define SET_GPIO_SC(name) \ +void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +{ \ + unsigned long flags; \ + BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ + local_irq_save(flags); \ + if (arg) \ + gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ + else \ + gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ +} \ +EXPORT_SYMBOL(set_gpio_ ## name); +#else #define SET_GPIO_SC(name) \ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ { \ @@ -326,37 +470,20 @@ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ } \ EXPORT_SYMBOL(set_gpio_ ## name); +#endif SET_GPIO_SC(maska) SET_GPIO_SC(maskb) - -#if defined(ANOMALY_05000311) -void set_gpio_data(unsigned short gpio, unsigned short arg) -{ - unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); - local_irq_save(flags); - if (arg) - gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); - else - gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); - bfin_read_CHIPID(); - local_irq_restore(flags); -} -EXPORT_SYMBOL(set_gpio_data); -#else SET_GPIO_SC(data) -#endif - -#if defined(ANOMALY_05000311) +#if ANOMALY_05000311 || ANOMALY_05000323 void set_gpio_toggle(unsigned short gpio) { unsigned long flags; BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); - bfin_read_CHIPID(); + AWA_DUMMY_READ(toggle); local_irq_restore(flags); } #else @@ -371,13 +498,27 @@ EXPORT_SYMBOL(set_gpio_toggle); /*Set current PORT date (16-bit word)*/ +#if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_P(name) \ void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ { \ + unsigned long flags; \ + local_irq_save(flags); \ gpio_bankb[gpio_bank(gpio)]->name = arg; \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ } \ EXPORT_SYMBOL(set_gpiop_ ## name); +#else +#define SET_GPIO_P(name) \ +void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ +{ \ + gpio_bankb[gpio_bank(gpio)]->name = arg; \ +} \ +EXPORT_SYMBOL(set_gpiop_ ## name); +#endif +SET_GPIO_P(data) SET_GPIO_P(dir) SET_GPIO_P(inen) SET_GPIO_P(polar) @@ -387,31 +528,30 @@ SET_GPIO_P(maska) SET_GPIO_P(maskb) -#if defined(ANOMALY_05000311) -void set_gpiop_data(unsigned short gpio, unsigned short arg) -{ - unsigned long flags; - local_irq_save(flags); - gpio_bankb[gpio_bank(gpio)]->data = arg; - bfin_read_CHIPID(); - local_irq_restore(flags); -} -EXPORT_SYMBOL(set_gpiop_data); -#else -SET_GPIO_P(data) -#endif - - - /* Get a specific bit */ - +#if ANOMALY_05000311 || ANOMALY_05000323 +#define GET_GPIO(name) \ +unsigned short get_gpio_ ## name(unsigned short gpio) \ +{ \ + unsigned long flags; \ + unsigned short ret; \ + local_irq_save(flags); \ + ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ + return ret; \ +} \ +EXPORT_SYMBOL(get_gpio_ ## name); +#else #define GET_GPIO(name) \ unsigned short get_gpio_ ## name(unsigned short gpio) \ { \ return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \ } \ EXPORT_SYMBOL(get_gpio_ ## name); +#endif +GET_GPIO(data) GET_GPIO(dir) GET_GPIO(inen) GET_GPIO(polar) @@ -420,33 +560,31 @@ GET_GPIO(both) GET_GPIO(maska) GET_GPIO(maskb) - -#if defined(ANOMALY_05000311) -unsigned short get_gpio_data(unsigned short gpio) -{ - unsigned long flags; - unsigned short ret; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); - local_irq_save(flags); - ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)); - bfin_read_CHIPID(); - local_irq_restore(flags); - return ret; -} -EXPORT_SYMBOL(get_gpio_data); -#else -GET_GPIO(data) -#endif - /*Get current PORT date (16-bit word)*/ +#if ANOMALY_05000311 || ANOMALY_05000323 +#define GET_GPIO_P(name) \ +unsigned short get_gpiop_ ## name(unsigned short gpio) \ +{ \ + unsigned long flags; \ + unsigned short ret; \ + local_irq_save(flags); \ + ret = (gpio_bankb[gpio_bank(gpio)]->name); \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ + return ret; \ +} \ +EXPORT_SYMBOL(get_gpiop_ ## name); +#else #define GET_GPIO_P(name) \ unsigned short get_gpiop_ ## name(unsigned short gpio) \ { \ return (gpio_bankb[gpio_bank(gpio)]->name);\ } \ EXPORT_SYMBOL(get_gpiop_ ## name); +#endif +GET_GPIO_P(data) GET_GPIO_P(dir) GET_GPIO_P(inen) GET_GPIO_P(polar) @@ -455,21 +593,6 @@ GET_GPIO_P(both) GET_GPIO_P(maska) GET_GPIO_P(maskb) -#if defined(ANOMALY_05000311) -unsigned short get_gpiop_data(unsigned short gpio) -{ - unsigned long flags; - unsigned short ret; - local_irq_save(flags); - ret = gpio_bankb[gpio_bank(gpio)]->data; - bfin_read_CHIPID(); - local_irq_restore(flags); - return ret; -} -EXPORT_SYMBOL(get_gpiop_data); -#else -GET_GPIO_P(data) -#endif #ifdef CONFIG_PM /*********************************************************** @@ -593,6 +716,8 @@ u32 gpio_pm_setup(void) } } + AWA_DUMMY_READ(maskb_set); + if (sic_iwr) return sic_iwr; else @@ -624,12 +749,99 @@ void gpio_pm_restore(void) gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb; } + AWA_DUMMY_READ(maskb); } #endif +#endif /* BF548_FAMILY */ +/*********************************************************** +* +* FUNCTIONS: Blackfin Peripheral Resource Allocation +* and PortMux Setup +* +* INPUTS/OUTPUTS: +* per Peripheral Identifier +* label String +* +* DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API +* +* CAUTION: +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +#ifdef BF548_FAMILY +int peripheral_request(unsigned short per, const char *label) +{ + unsigned long flags; + unsigned short ident = P_IDENT(per); + + /* + * Don't cares are pins with only one dedicated function + */ + + if (per & P_DONTCARE) + return 0; + + if (!(per & P_DEFINED)) + return -ENODEV; + + if (check_gpio(ident) < 0) + return -EINVAL; + + local_irq_save(flags); + + if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { + printk(KERN_ERR + "%s: Peripheral %d is already reserved as GPIO by %s !\n", + __FUNCTION__, ident, get_label(ident)); + dump_stack(); + local_irq_restore(flags); + return -EBUSY; + } + + if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { + + u16 funct = get_portmux(ident); + + /* + * Pin functions like AMC address strobes my + * be requested and used by several drivers + */ + + if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { + + /* + * Allow that the identical pin function can + * be requested from the same driver twice + */ + + if (cmp_label(ident, label) == 0) + goto anyway; + printk(KERN_ERR + "%s: Peripheral %d function %d is already reserved by %s !\n", + __FUNCTION__, ident, P_FUNCT2MUX(per), get_label(ident)); + dump_stack(); + local_irq_restore(flags); + return -EBUSY; + } + } +anyway: + reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); + + portmux_setup(ident, P_FUNCT2MUX(per)); + port_setup(ident, PERIPHERAL_USAGE); + + local_irq_restore(flags); + set_label(ident, label); + + return 0; +} +EXPORT_SYMBOL(peripheral_request); +#else int peripheral_request(unsigned short per, const char *label) { @@ -680,7 +892,7 @@ int peripheral_request(unsigned short per, const char *label) printk(KERN_ERR "%s: Peripheral %d function %d is already" - "reserved by %s !\n", + " reserved by %s !\n", __FUNCTION__, ident, P_FUNCT2MUX(per), get_label(ident)); dump_stack(); @@ -691,8 +903,6 @@ int peripheral_request(unsigned short per, const char *label) } anyway: - - portmux_setup(per, P_FUNCT2MUX(per)); port_setup(ident, PERIPHERAL_USAGE); @@ -704,6 +914,7 @@ anyway: return 0; } EXPORT_SYMBOL(peripheral_request); +#endif int peripheral_request_list(unsigned short per[], const char *label) { @@ -711,9 +922,15 @@ int peripheral_request_list(unsigned short per[], const char *label) int ret; for (cnt = 0; per[cnt] != 0; cnt++) { + ret = peripheral_request(per[cnt], label); - if (ret < 0) - return ret; + + if (ret < 0) { + for ( ; cnt > 0; cnt--) { + peripheral_free(per[cnt - 1]); + } + return ret; + } } return 0; @@ -748,6 +965,8 @@ void peripheral_free(unsigned short per) reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident); + set_label(ident, "free"); + local_irq_restore(flags); } EXPORT_SYMBOL(peripheral_free); @@ -768,8 +987,8 @@ EXPORT_SYMBOL(peripheral_free_list); * FUNCTIONS: Blackfin GPIO Driver * * INPUTS/OUTPUTS: -* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS -* +* gpio PIO Number between 0 and MAX_BLACKFIN_GPIOS +* label String * * DESCRIPTION: Blackfin GPIO Driver API * @@ -787,17 +1006,39 @@ int gpio_request(unsigned short gpio, const char *label) local_irq_save(flags); + /* + * Allow that the identical GPIO can + * be requested from the same driver twice + * Do nothing and return - + */ + + if (cmp_label(gpio, label) == 0) { + local_irq_restore(flags); + return 0; + } + if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio); + printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", + gpio, get_label(gpio)); dump_stack(); local_irq_restore(flags); return -EBUSY; } + if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + printk(KERN_ERR + "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", + gpio, get_label(gpio)); + dump_stack(); + local_irq_restore(flags); + return -EBUSY; + } + reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); local_irq_restore(flags); port_setup(gpio, GPIO_USAGE); + set_label(gpio, label); return 0; } @@ -823,10 +1064,57 @@ void gpio_free(unsigned short gpio) reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + set_label(gpio, "free"); + local_irq_restore(flags); } EXPORT_SYMBOL(gpio_free); +#ifdef BF548_FAMILY +void gpio_direction_input(unsigned short gpio) +{ + unsigned long flags; + + BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + + local_irq_save(flags); + gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_direction_input); + +void gpio_direction_output(unsigned short gpio) +{ + unsigned long flags; + + BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + + local_irq_save(flags); + gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_direction_output); + +void gpio_set_value(unsigned short gpio, unsigned short arg) +{ + if (arg) + gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); + +} +EXPORT_SYMBOL(gpio_set_value); + +unsigned short gpio_get_value(unsigned short gpio) +{ + return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); +} +EXPORT_SYMBOL(gpio_get_value); + +#else + void gpio_direction_input(unsigned short gpio) { unsigned long flags; @@ -836,6 +1124,7 @@ void gpio_direction_input(unsigned short gpio) local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); + AWA_DUMMY_READ(inen); local_irq_restore(flags); } EXPORT_SYMBOL(gpio_direction_input); @@ -849,6 +1138,28 @@ void gpio_direction_output(unsigned short gpio) local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); + AWA_DUMMY_READ(dir); local_irq_restore(flags); } EXPORT_SYMBOL(gpio_direction_output); + +/* If we are booting from SPI and our board lacks a strong enough pull up, + * the core can reset and execute the bootrom faster than the resistor can + * pull the signal logically high. To work around this (common) error in + * board design, we explicitly set the pin back to GPIO mode, force /CS + * high, and wait for the electrons to do their thing. + * + * This function only makes sense to be called from reset code, but it + * lives here as we need to force all the GPIO states w/out going through + * BUG() checks and such. + */ +void bfin_gpio_reset_spi0_ssel1(void) +{ + u16 gpio = P_IDENT(P_SPI0_SSEL1); + + port_setup(gpio, GPIO_USAGE); + gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + udelay(1); +} + +#endif /*BF548_FAMILY */ diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index 70455949cfd..2198afe40f3 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -60,6 +60,7 @@ EXPORT_SYMBOL(csum_partial_copy); * their interface isn't gonna change any time soon now, so * it's OK to leave it out of version control. */ +EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcmp); diff --git a/arch/blackfin/kernel/cacheinit.c b/arch/blackfin/kernel/cacheinit.c index 4d41a40e813..62cbba7364b 100644 --- a/arch/blackfin/kernel/cacheinit.c +++ b/arch/blackfin/kernel/cacheinit.c @@ -21,9 +21,10 @@ #include <asm/cacheflush.h> #include <asm/blackfin.h> +#include <asm/cplb.h> #include <asm/cplbinit.h> -#if defined(CONFIG_BLKFIN_CACHE) +#if defined(CONFIG_BFIN_ICACHE) void bfin_icache_init(void) { unsigned long *table = icplb_table; @@ -44,7 +45,7 @@ void bfin_icache_init(void) } #endif -#if defined(CONFIG_BLKFIN_DCACHE) +#if defined(CONFIG_BFIN_DCACHE) void bfin_dcache_init(void) { unsigned long *table = dcplb_table; diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplbinit.c index bbdb403fcb5..f2db6a5e2b5 100644 --- a/arch/blackfin/kernel/cplbinit.c +++ b/arch/blackfin/kernel/cplbinit.c @@ -23,6 +23,7 @@ #include <linux/module.h> #include <asm/blackfin.h> +#include <asm/cplb.h> #include <asm/cplbinit.h> u_long icplb_table[MAX_CPLBS+1]; @@ -56,7 +57,7 @@ struct s_cplb { struct cplb_tab switch_d; }; -#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) +#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) static struct cplb_desc cplb_data[] = { { .start = 0, @@ -230,8 +231,8 @@ static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_en cplb_data[i].psize, cplb_data[i].i_conf); } else { -#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) - if (i == SDRAM_KERN) { +#if defined(CONFIG_BFIN_ICACHE) + if (ANOMALY_05000263 && i == SDRAM_KERN) { fill_cplbtab(t, cplb_data[i].start, cplb_data[i].end, diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c new file mode 100644 index 00000000000..6ec518a8111 --- /dev/null +++ b/arch/blackfin/kernel/early_printk.c @@ -0,0 +1,214 @@ +/* + * File: arch/blackfin/kernel/early_printk.c + * Based on: arch/x86_64/kernel/early_printk.c + * Author: Robin Getz <rgetz@blackfin.uclinux.org + * + * Created: 14Aug2007 + * Description: allow a console to be used for early printk + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/console.h> +#include <linux/string.h> +#include <asm/blackfin.h> +#include <asm/irq_handler.h> +#include <asm/early_printk.h> + +#ifdef CONFIG_SERIAL_BFIN +extern struct console *bfin_earlyserial_init(unsigned int port, + unsigned int cflag); +#endif + +static struct console *early_console; + +/* Default console */ +#define DEFAULT_PORT 0 +#define DEFAULT_CFLAG CS8|B57600 + +/* Default console for early crashes */ +#define DEFAULT_EARLY_PORT "serial,uart0,57600" + +#ifdef CONFIG_SERIAL_CORE +/* What should get here is "0,57600" */ +static struct console * __init earlyserial_init(char *buf) +{ + int baud, bit; + char parity; + unsigned int serial_port = DEFAULT_PORT; + unsigned int cflag = DEFAULT_CFLAG; + + serial_port = simple_strtoul(buf, &buf, 10); + buf++; + + cflag = 0; + baud = simple_strtoul(buf, &buf, 10); + switch (baud) { + case 1200: + cflag |= B1200; + break; + case 2400: + cflag |= B2400; + break; + case 4800: + cflag |= B4800; + break; + case 9600: + cflag |= B9600; + break; + case 19200: + cflag |= B19200; + break; + case 38400: + cflag |= B38400; + break; + case 115200: + cflag |= B115200; + break; + default: + cflag |= B57600; + } + + parity = buf[0]; + buf++; + switch (parity) { + case 'e': + cflag |= PARENB; + break; + case 'o': + cflag |= PARODD; + break; + } + + bit = simple_strtoul(buf, &buf, 10); + switch (bit) { + case 5: + cflag |= CS5; + break; + case 6: + cflag |= CS5; + break; + case 7: + cflag |= CS5; + break; + default: + cflag |= CS8; + } + +#ifdef CONFIG_SERIAL_BFIN + return bfin_earlyserial_init(serial_port, cflag); +#else + return NULL; +#endif + +} +#endif + +int __init setup_early_printk(char *buf) +{ + + /* Crashing in here would be really bad, so check both the var + and the pointer before we start using it + */ + if (!buf) + return 0; + + if (!*buf) + return 0; + + if (early_console != NULL) + return 0; + +#ifdef CONFIG_SERIAL_BFIN + /* Check for Blackfin Serial */ + if (!strncmp(buf, "serial,uart", 11)) { + buf += 11; + early_console = earlyserial_init(buf); + } +#endif +#ifdef CONFIG_FB + /* TODO: add framebuffer console support */ +#endif + + if (likely(early_console)) { + early_console->flags |= CON_BOOT; + + register_console(early_console); + printk(KERN_INFO "early printk enabled on %s%d\n", + early_console->name, + early_console->index); + } + + return 0; +} + +/* + * Set up a temporary Event Vector Table, so if something bad happens before + * the kernel is fully started, it doesn't vector off into somewhere we don't + * know + */ + +asmlinkage void __init init_early_exception_vectors(void) +{ + SSYNC(); + + /* cannot program in software: + * evt0 - emulation (jtag) + * evt1 - reset + */ + bfin_write_EVT2(early_trap); + bfin_write_EVT3(early_trap); + bfin_write_EVT5(early_trap); + bfin_write_EVT6(early_trap); + bfin_write_EVT7(early_trap); + bfin_write_EVT8(early_trap); + bfin_write_EVT9(early_trap); + bfin_write_EVT10(early_trap); + bfin_write_EVT11(early_trap); + bfin_write_EVT12(early_trap); + bfin_write_EVT13(early_trap); + bfin_write_EVT14(early_trap); + bfin_write_EVT15(early_trap); + CSYNC(); + + /* Set all the return from interupt, exception, NMI to a known place + * so if we do a RETI, RETX or RETN by mistake - we go somewhere known + * Note - don't change RETS - we are in a subroutine, or + * RETE - since it might screw up if emulator is attached + */ + asm("\tRETI = %0; RETX = %0; RETN = %0;\n" + : : "p"(early_trap)); + +} + +asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr) +{ + /* This can happen before the uart is initialized, so initialize + * the UART now + */ + if (likely(early_console == NULL)) + setup_early_printk(DEFAULT_EARLY_PORT); + + dump_bfin_regs(fp, retaddr); + dump_bfin_trace_buffer(); + + panic("Died early"); +} + +early_param("earlyprintk", setup_early_printk); diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 1fc001c7abd..73647c15877 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -34,6 +34,7 @@ #include <linux/kallsyms.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <asm/trace.h> static unsigned long irq_err_count; static spinlock_t irq_controller_lock; @@ -97,9 +98,8 @@ int show_interrupts(struct seq_file *p, void *v) */ #ifdef CONFIG_DO_IRQ_L1 -asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)__attribute__((l1_text)); +__attribute__((l1_text)) #endif - asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) { struct pt_regs *old_regs; @@ -144,4 +144,12 @@ void __init init_IRQ(void) } init_arch_irq(); + +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + /* Now that evt_ivhw is set up, turn this on */ + trace_buff_offset = 0; + bfin_write_TBUFCTL(BFIN_TRACE_ON); + printk(KERN_INFO "Hardware Trace expanded to %ik\n", + 1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN); +#endif } diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 6a7aefe4834..9124467651c 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -134,31 +134,6 @@ void cpu_idle(void) } } -void machine_restart(char *__unused) -{ -#if defined(CONFIG_BLKFIN_CACHE) - bfin_write_IMEM_CONTROL(0x01); - SSYNC(); -#endif - bfin_reset(); - /* Dont do anything till the reset occurs */ - while (1) { - SSYNC(); - } -} - -void machine_halt(void) -{ - for (;;) - asm volatile ("idle"); -} - -void machine_power_off(void) -{ - for (;;) - asm volatile ("idle"); -} - void show_regs(struct pt_regs *regs) { printk(KERN_NOTICE "\n"); @@ -420,7 +395,8 @@ void finish_atomic_sections (struct pt_regs *regs) #if defined(CONFIG_ACCESS_CHECK) int _access_ok(unsigned long addr, unsigned long size) { - + if (size == 0) + return 1; if (addr > (addr + size)) return 0; if (segment_eq(get_fs(), KERNEL_DS)) diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index ed800c7456d..64ce5fea860 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -44,6 +44,7 @@ #include <asm/processor.h> #include <asm/asm-offsets.h> #include <asm/dma.h> +#include <asm/fixed_code.h> #define MAX_SHARED_LIBS 3 #define TEXT_OFFSET 0 @@ -169,6 +170,9 @@ static inline int is_user_addr_valid(struct task_struct *child, && start + len <= (unsigned long)sraml->addr + sraml->length) return 0; + if (start >= FIXED_CODE_START && start + len <= FIXED_CODE_END) + return 0; + return -EIO; } @@ -215,9 +219,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) copied = sizeof(tmp); } else #endif - copied = - access_process_vm(child, addr + add, &tmp, - sizeof(tmp), 0); + if (addr + add >= FIXED_CODE_START + && addr + add + sizeof(tmp) <= FIXED_CODE_END) { + memcpy(&tmp, (const void *)(addr + add), sizeof(tmp)); + copied = sizeof(tmp); + } else + copied = access_process_vm(child, addr + add, &tmp, + sizeof(tmp), 0); pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp); if (copied != sizeof(tmp)) break; @@ -281,9 +289,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) copied = sizeof(data); } else #endif - copied = - access_process_vm(child, addr + add, &data, - sizeof(data), 1); + if (addr + add >= FIXED_CODE_START + && addr + add + sizeof(data) <= FIXED_CODE_END) { + memcpy((void *)(addr + add), &data, sizeof(data)); + copied = sizeof(data); + } else + copied = access_process_vm(child, addr + add, &data, + sizeof(data), 1); pr_debug("ptrace: copied size %d\n", copied); if (copied != sizeof(data)) break; diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c new file mode 100644 index 00000000000..356078ec462 --- /dev/null +++ b/arch/blackfin/kernel/reboot.c @@ -0,0 +1,78 @@ +/* + * arch/blackfin/kernel/reboot.c - handle shutdown/reboot + * + * Copyright 2004-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/interrupt.h> +#include <asm/bfin-global.h> +#include <asm/reboot.h> +#include <asm/system.h> + +#if defined(BF537_FAMILY) || defined(BF533_FAMILY) +#define SYSCR_VAL 0x0 +#elif defined(BF561_FAMILY) +#define SYSCR_VAL 0x20 +#elif defined(BF548_FAMILY) +#define SYSCR_VAL 0x10 +#endif + +/* A system soft reset makes external memory unusable + * so force this function into L1. + */ +__attribute__((l1_text)) +void bfin_reset(void) +{ + /* force BMODE and disable Core B (as needed) */ + bfin_write_SYSCR(SYSCR_VAL); + + /* we use asm ssync here because it's save and we save some L1 */ + asm("ssync;"); + + while (1) { + /* initiate system soft reset with magic 0x7 */ + bfin_write_SWRST(0x7); + asm("ssync;"); + /* clear system soft reset */ + bfin_write_SWRST(0); + asm("ssync;"); + /* issue core reset */ + asm("raise 1"); + } +} + +__attribute__((weak)) +void native_machine_restart(char *cmd) +{ +} + +void machine_restart(char *cmd) +{ + native_machine_restart(cmd); + local_irq_disable(); + bfin_reset(); +} + +__attribute__((weak)) +void native_machine_halt(void) +{ + idle_with_irq_disabled(); +} + +void machine_halt(void) +{ + native_machine_halt(); +} + +__attribute__((weak)) +void native_machine_power_off(void) +{ + idle_with_irq_disabled(); +} + +void machine_power_off(void) +{ + native_machine_power_off(); +} diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 88f221b89b3..8dcd76e87ed 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -39,10 +39,12 @@ #include <linux/cramfs_fs.h> #include <linux/romfs_fs.h> +#include <asm/cplb.h> #include <asm/cacheflush.h> #include <asm/blackfin.h> #include <asm/cplbinit.h> #include <asm/fixed_code.h> +#include <asm/early_printk.h> u16 _bfin_swrst; @@ -66,21 +68,21 @@ char __initdata command_line[COMMAND_LINE_SIZE]; void __init bf53x_cache_init(void) { -#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) +#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) generate_cpl_tables(); #endif -#ifdef CONFIG_BLKFIN_CACHE +#ifdef CONFIG_BFIN_ICACHE bfin_icache_init(); printk(KERN_INFO "Instruction Cache Enabled\n"); #endif -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE bfin_dcache_init(); printk(KERN_INFO "Data Cache Enabled" -# if defined CONFIG_BLKFIN_WB +# if defined CONFIG_BFIN_WB " (write-back)" -# elif defined CONFIG_BLKFIN_WT +# elif defined CONFIG_BFIN_WT " (write-through)" # endif "\n"); @@ -156,8 +158,10 @@ static __init void parse_cmdline_early(char *cmdline_p) 1; } } + } else if (!memcmp(to, "earlyprintk=", 12)) { + to += 12; + setup_early_printk(to); } - } c = *(to++); if (!c) @@ -176,22 +180,36 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #endif + +#if defined(CONFIG_CMDLINE_BOOL) + strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line)); + command_line[sizeof(command_line) - 1] = 0; +#endif + + /* Keep a copy of command line */ + *cmdline_p = &command_line[0]; + memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE - 1] = '\0'; + + /* setup memory defaults from the user config */ + physical_mem_end = 0; + _ramend = CONFIG_MEM_SIZE * 1024 * 1024; + + parse_cmdline_early(&command_line[0]); + cclk = get_cclk(); sclk = get_sclk(); -#if !defined(CONFIG_BFIN_KERNEL_CLOCK) && defined(ANOMALY_05000273) - if (cclk == sclk) +#if !defined(CONFIG_BFIN_KERNEL_CLOCK) + if (ANOMALY_05000273 && cclk == sclk) panic("ANOMALY 05000273, SCLK can not be same as CCLK"); #endif -#if defined(ANOMALY_05000266) - bfin_read_IMDMA_D0_IRQ_STATUS(); - bfin_read_IMDMA_D1_IRQ_STATUS(); -#endif - -#ifdef DEBUG_SERIAL_EARLY_INIT - bfin_console_init(); /* early console registration */ - /* this give a chance to get printk() working before crash. */ +#ifdef BF561_FAMILY + if (ANOMALY_05000266) { + bfin_read_IMDMA_D0_IRQ_STATUS(); + bfin_read_IMDMA_D1_IRQ_STATUS(); + } #endif printk(KERN_INFO "Hardware Trace "); @@ -212,22 +230,6 @@ void __init setup_arch(char **cmdline_p) flash_probe(); #endif -#if defined(CONFIG_CMDLINE_BOOL) - strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line)); - command_line[sizeof(command_line) - 1] = 0; -#endif - - /* Keep a copy of command line */ - *cmdline_p = &command_line[0]; - memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); - boot_command_line[COMMAND_LINE_SIZE - 1] = '\0'; - - /* setup memory defaults from the user config */ - physical_mem_end = 0; - _ramend = CONFIG_MEM_SIZE * 1024 * 1024; - - parse_cmdline_early(&command_line[0]); - if (physical_mem_end == 0) physical_mem_end = _ramend; @@ -260,7 +262,7 @@ void __init setup_arch(char **cmdline_p) && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1) mtd_size = PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2])); -# if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) +# if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) /* Due to a Hardware Anomaly we need to limit the size of usable * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on * 05000263 - Hardware loop corrupted when taking an ICPLB exception @@ -289,7 +291,7 @@ void __init setup_arch(char **cmdline_p) _ebss = memory_mtd_start; /* define _ebss for compatible */ #endif /* CONFIG_MTD_UCLINUX */ -#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) +#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) /* Due to a Hardware Anomaly we need to limit the size of usable * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on * 05000263 - Hardware loop corrupted when taking an ICPLB exception @@ -334,13 +336,11 @@ void __init setup_arch(char **cmdline_p) CPU, bfin_revid()); printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); - printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu Mhz System Clock\n", + printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", cclk / 1000000, sclk / 1000000); -#if defined(ANOMALY_05000273) - if ((cclk >> 1) <= sclk) + if (ANOMALY_05000273 && (cclk >> 1) <= sclk) printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n"); -#endif printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20); printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); @@ -535,9 +535,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "I-CACHE:\tOFF\n"); if ((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE)) seq_printf(m, "D-CACHE:\tON" -#if defined CONFIG_BLKFIN_WB +#if defined CONFIG_BFIN_WB " (write-back)" -#elif defined CONFIG_BLKFIN_WT +#elif defined CONFIG_BFIN_WT " (write-through)" #endif "\n"); @@ -566,15 +566,15 @@ static int show_cpuinfo(struct seq_file *m, void *v) } - seq_printf(m, "I-CACHE Size:\t%dKB\n", BLKFIN_ICACHESIZE / 1024); + seq_printf(m, "I-CACHE Size:\t%dKB\n", BFIN_ICACHESIZE / 1024); seq_printf(m, "D-CACHE Size:\t%dKB\n", dcache_size); seq_printf(m, "I-CACHE Setup:\t%d Sub-banks/%d Ways, %d Lines/Way\n", - BLKFIN_ISUBBANKS, BLKFIN_IWAYS, BLKFIN_ILINES); + BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES); seq_printf(m, "D-CACHE Setup:\t%d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n", - dsup_banks, BLKFIN_DSUBBANKS, BLKFIN_DWAYS, - BLKFIN_DLINES); -#ifdef CONFIG_BLKFIN_CACHE_LOCK + dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS, + BFIN_DLINES); +#ifdef CONFIG_BFIN_ICACHE_LOCK switch (read_iloc()) { case WAY0_L: seq_printf(m, "Way0 Locked-Down\n"); diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 792a8416fe1..8823e9ade58 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -51,10 +51,9 @@ void __init trap_init(void) CSYNC(); } -asmlinkage void trap_c(struct pt_regs *fp); - int kstack_depth_to_print = 48; +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON static int printk_address(unsigned long address) { struct vm_list_struct *vml; @@ -131,10 +130,22 @@ static int printk_address(unsigned long address) /* we were unable to find this address anywhere */ return printk("[<0x%p>]", (void *)address); } +#endif + +asmlinkage void double_fault_c(struct pt_regs *fp) +{ + printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); + dump_bfin_regs(fp, (void *)fp->retx); + panic("Double Fault - unrecoverable event\n"); + +} asmlinkage void trap_c(struct pt_regs *fp) { - int j, sig = 0; +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + int j; +#endif + int sig = 0; siginfo_t info; unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE; @@ -391,10 +402,6 @@ asmlinkage void trap_c(struct pt_regs *fp) break; } - info.si_signo = sig; - info.si_errno = 0; - info.si_addr = (void *)fp->pc; - force_sig_info(sig, &info, current); if (sig != 0 && sig != SIGTRAP) { unsigned long stack; dump_bfin_regs(fp, (void *)fp->retx); @@ -403,6 +410,10 @@ asmlinkage void trap_c(struct pt_regs *fp) if (current->mm == NULL) panic("Kernel exception"); } + info.si_signo = sig; + info.si_errno = 0; + info.si_addr = (void *)fp->pc; + force_sig_info(sig, &info, current); /* if the address that we are about to return to is not valid, set it * to a valid address, if we have a current application or panic @@ -429,24 +440,56 @@ asmlinkage void trap_c(struct pt_regs *fp) /* Typical exception handling routines */ +#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1) + void dump_bfin_trace_buffer(void) { - int tflags; +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + int tflags, i = 0; +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + int j, index; +#endif + trace_buffer_save(tflags); + printk(KERN_EMERG "Hardware Trace:\n"); + if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) { - int i; - printk(KERN_EMERG "Hardware Trace:\n"); - for (i = 0; bfin_read_TBUFSTAT() & TBUFCNT; i++) { - printk(KERN_EMERG "%2i Target : ", i); + for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { + printk(KERN_EMERG "%4i Target : ", i); printk_address((unsigned long)bfin_read_TBUF()); - printk("\n" KERN_EMERG " Source : "); + printk("\n" KERN_EMERG " Source : "); printk_address((unsigned long)bfin_read_TBUF()); printk("\n"); } } +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + if (trace_buff_offset) + index = trace_buff_offset/4 - 1; + else + index = EXPAND_LEN; + + j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128; + while (j) { + printk(KERN_EMERG "%4i Target : ", i); + printk_address(software_trace_buff[index]); + index -= 1; + if (index < 0 ) + index = EXPAND_LEN; + printk("\n" KERN_EMERG " Source : "); + printk_address(software_trace_buff[index]); + index -= 1; + if (index < 0) + index = EXPAND_LEN; + printk("\n"); + j--; + i++; + } +#endif + trace_buffer_restore(tflags); +#endif } EXPORT_SYMBOL(dump_bfin_trace_buffer); @@ -510,7 +553,9 @@ void show_stack(struct task_struct *task, unsigned long *stack) void dump_stack(void) { unsigned long stack; +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON int tflags; +#endif trace_buffer_save(tflags); dump_bfin_trace_buffer(); show_stack(current, &stack); @@ -559,8 +604,7 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr) unsigned short x = 0; for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) { if (!(i & 0xF)) - printk(KERN_EMERG "\n" KERN_EMERG - "0x%08x: ", i); + printk("\n" KERN_EMERG "0x%08x: ", i); if (get_user(x, (unsigned short *)i)) break; @@ -655,6 +699,42 @@ asmlinkage int sys_bfin_spinlock(int *spinlock) return ret; } +int bfin_request_exception(unsigned int exception, void (*handler)(void)) +{ + void (*curr_handler)(void); + + if (exception > 0x3F) + return -EINVAL; + + curr_handler = ex_table[exception]; + + if (curr_handler != ex_replaceable) + return -EBUSY; + + ex_table[exception] = handler; + + return 0; +} +EXPORT_SYMBOL(bfin_request_exception); + +int bfin_free_exception(unsigned int exception, void (*handler)(void)) +{ + void (*curr_handler)(void); + + if (exception > 0x3F) + return -EINVAL; + + curr_handler = ex_table[exception]; + + if (curr_handler != handler) + return -EBUSY; + + ex_table[exception] = ex_replaceable; + + return 0; +} +EXPORT_SYMBOL(bfin_free_exception); + void panic_cplb_error(int cplb_panic, struct pt_regs *fp) { switch (cplb_panic) { diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index fb53780247b..eec43674a46 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -49,7 +49,8 @@ SECTIONS TEXT_TEXT SCHED_TEXT LOCK_TEXT - *(.text.lock) + KPROBES_TEXT + *(.text.*) *(.fixup) . = ALIGN(16); @@ -61,7 +62,7 @@ SECTIONS __etext = .; } - RODATA + RO_DATA(PAGE_SIZE) .data : { @@ -72,50 +73,63 @@ SECTIONS __sdata = .; . = ALIGN(THREAD_SIZE); *(.data.init_task) - DATA_DATA - CONSTRUCTORS . = ALIGN(32); *(.data.cacheline_aligned) + DATA_DATA + *(.data.*) + CONSTRUCTORS + . = ALIGN(THREAD_SIZE); __edata = .; } ___init_begin = .; - .init : + + .init.text : { . = ALIGN(PAGE_SIZE); __sinittext = .; *(.init.text) __einittext = .; + } + .init.data : + { + . = ALIGN(16); *(.init.data) + } + .init.setup : + { . = ALIGN(16); ___setup_start = .; *(.init.setup) ___setup_end = .; - ___start___param = .; - *(__param) - ___stop___param = .; + } + .initcall.init : + { ___initcall_start = .; INITCALLS ___initcall_end = .; + } + .con_initcall.init : + { ___con_initcall_start = .; *(.con_initcall.init) ___con_initcall_end = .; - ___security_initcall_start = .; - *(.security_initcall.init) - ___security_initcall_end = .; + } + SECURITY_INIT + .init.ramfs : + { . = ALIGN(4); ___initramfs_start = .; *(.init.ramfs) ___initramfs_end = .; - . = ALIGN(4); } __l1_lma_start = .; - .text_l1 L1_CODE_START : AT(LOADADDR(.init) + SIZEOF(.init)) + .text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs)) { . = ALIGN(4); __stext_l1 = .; @@ -164,13 +178,19 @@ SECTIONS { . = ALIGN(4); ___bss_start = .; - *(.bss) + *(.bss .bss.*) *(COMMON) . = ALIGN(4); ___bss_stop = .; __end = .; } + STABS_DEBUG + + DWARF_DEBUG + + NOTES + /DISCARD/ : { *(.exit.text) diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S index b88c5d2d1eb..219fa2877c6 100644 --- a/arch/blackfin/lib/memcmp.S +++ b/arch/blackfin/lib/memcmp.S @@ -61,7 +61,7 @@ ENTRY(_memcmp) LSETUP (.Lquad_loop_s, .Lquad_loop_e) LC0=P1; .Lquad_loop_s: -#ifdef ANOMALY_05000202 +#if ANOMALY_05000202 R0 = [P0++]; R1 = [I0++]; #else diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S index 14a5585bbd0..2e6336492b4 100644 --- a/arch/blackfin/lib/memcpy.S +++ b/arch/blackfin/lib/memcpy.S @@ -98,7 +98,7 @@ ENTRY(_memcpy) R0 = R1; I1 = P1; R3 = [I1++]; -#ifdef ANOMALY_05000202 +#if ANOMALY_05000202 .Lword_loops: [P0++] = R3; .Lword_loope: diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S index 6ee6e206e77..33f8653145b 100644 --- a/arch/blackfin/lib/memmove.S +++ b/arch/blackfin/lib/memmove.S @@ -70,7 +70,7 @@ ENTRY(_memmove) R1 = [I0++]; LSETUP (.Lquad_loops, .Lquad_loope) LC0=P1; -#ifdef ANOMALY_05000202 +#if ANOMALY_05000202 .Lquad_loops: [P0++] = R1; .Lquad_loope: @@ -102,7 +102,7 @@ ENTRY(_memmove) R1 = B[P3--] (Z); CC = P2 == 0; IF CC JUMP .Lno_loop; -#ifdef ANOMALY_05000245 +#if ANOMALY_05000245 NOP; NOP; #endif diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 4545f363e64..a57b52d207c 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -34,7 +34,9 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb_isp1362.h> +#include <linux/pata_platform.h> #include <linux/irq.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> /* @@ -93,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -101,7 +103,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 2, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -110,24 +112,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -227,6 +245,43 @@ static struct platform_device isp1362_hcd_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 38 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2030C000, + .end = 0x2030C01F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2030D018, + .end = 0x2030D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *cm_bf533_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, @@ -250,7 +305,11 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, #endif }; @@ -261,6 +320,10 @@ static int __init cm_bf533_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 0000b8f1239..5c1e35d3c01 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -35,7 +35,9 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb_isp1362.h> +#include <linux/pata_platform.h> #include <linux/irq.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> /* @@ -50,6 +52,12 @@ static struct platform_device rtc_device = { }; #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", +}; +#endif + /* * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. @@ -131,7 +139,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -143,7 +151,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -154,24 +162,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -193,13 +217,54 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, #endif #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) @@ -209,6 +274,10 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init ezkit_init(void) @@ -218,6 +287,10 @@ static int __init ezkit_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index a9143c4cbdc..8975e06ea15 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -37,8 +37,11 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb_isp1362.h> #endif +#include <linux/pata_platform.h> #include <linux/irq.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/reboot.h> /* * Name the Board for the /proc/cpuinfo @@ -77,6 +80,12 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", +}; +#endif + #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) static struct resource net2272_bfin_resources[] = { { @@ -177,7 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -189,7 +198,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -200,7 +209,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 31250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -210,7 +219,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 0, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -219,7 +228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -231,16 +240,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "fxs-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 3, + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, { .modalias = "fxo-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 2, + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, @@ -250,7 +259,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad5304_spi", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 2, .platform_data = NULL, .controller_data = &ad5304_chip_info, @@ -259,17 +268,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -309,6 +334,43 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -318,12 +380,16 @@ static struct platform_device *stamp_devices[] __initdata = { &smc91x_device, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, +#endif + #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) &net2272_bfin_device, #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) @@ -334,6 +400,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport0_uart_device, &bfin_sport1_uart_device, #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init stamp_init(void) @@ -355,8 +425,23 @@ static int __init stamp_init(void) #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif + return 0; } arch_initcall(stamp_init); + +void native_machine_restart(char *cmd) +{ +#if defined(CONFIG_BFIN_SHARED_FLASH_ENET) +# define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN) + bfin_write_FIO_INEN(~BIT_TO_SET); + bfin_write_FIO_DIR(BIT_TO_SET); + bfin_write_FIO_FLAG_C(BIT_TO_SET); +#endif +} diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 7dd0e9c3a93..1ded945a6fa 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -32,11 +32,9 @@ #include <asm/blackfin.h> #include <asm/trace.h> #if CONFIG_BFIN_KERNEL_CLOCK +#include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif -#if CONFIG_DEBUG_KERNEL_START -#include <asm/mach-common/def_LPBlackfin.h> -#endif .global __rambase .global __ramstart @@ -52,10 +50,12 @@ __INIT ENTRY(__start) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; - /* Set the SYSCFG register: - * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit) - */ - R0 = 0x36; + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif SYSCFG = R0; R0 = 0; @@ -97,40 +97,10 @@ ENTRY(__start) M2 = r0; M3 = r0; - trace_buffer_start(p0,r0); + trace_buffer_init(p0,r0); P0 = R1; R0 = R1; -#if CONFIG_DEBUG_KERNEL_START - -/* - * Set up a temporary Event Vector Table, so if something bad happens before - * the kernel is fully started, it doesn't vector off into the bootloaders - * table - */ - P0.l = lo(EVT2); - P0.h = hi(EVT2); - P1.l = lo(EVT15); - P1.h = hi(EVT15); - P2.l = debug_kernel_start_trap; - P2.h = debug_kernel_start_trap; - - RTS = P2; - RTI = P2; - RTX = P2; - RTN = P2; - RTE = P2; - -.Lfill_temp_vector_table: - [P0++] = P2; /* Core Event Vector Table */ - CC = P0 == P1; - if !CC JUMP .Lfill_temp_vector_table - P0 = r0; - P1 = r0; - P2 = r0; - -#endif - p0.h = hi(FIO_MASKA_C); p0.l = lo(FIO_MASKA_C); r0 = 0xFFFF(Z); @@ -144,38 +114,38 @@ ENTRY(__start) ssync; /* Turn off the icache */ - p0.l = (IMEM_CONTROL & 0xFFFF); - p0.h = (IMEM_CONTROL >> 16); + p0.l = LO(IMEM_CONTROL); + p0.h = HI(IMEM_CONTROL); R1 = [p0]; R0 = ~ENICPLB; R0 = R0 & R1; /* Anomaly 05000125 */ -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 CLI R2; SSYNC; #endif [p0] = R0; SSYNC; -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 STI R2; #endif /* Turn off the dcache */ - p0.l = (DMEM_CONTROL & 0xFFFF); - p0.h = (DMEM_CONTROL >> 16); + p0.l = LO(DMEM_CONTROL); + p0.h = HI(DMEM_CONTROL); R1 = [p0]; R0 = ~ENDCPLB; R0 = R0 & R1; /* Anomaly 05000125 */ -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 CLI R2; SSYNC; #endif [p0] = R0; SSYNC; -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 STI R2; #endif @@ -211,6 +181,12 @@ ENTRY(__start) fp = sp; usp = sp; +#ifdef CONFIG_EARLY_PRINTK + SP += -12; + call _init_early_exception_vectors; + SP += 12; +#endif + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; #if CONFIG_BFIN_KERNEL_CLOCK @@ -264,7 +240,7 @@ ENTRY(__start) p0.l = .LWAIT_HERE; p0.h = .LWAIT_HERE; reti = p0; -#if defined(ANOMALY_05000281) +#if ANOMALY_05000281 nop; nop; nop; #endif rti; @@ -417,8 +393,8 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + p0.l = LO(EBIU_SDBCTL); + p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ r0 = mem_SDBCTL; w[p0] = r0.l; ssync; @@ -456,276 +432,6 @@ ENTRY(_start_dma_code) ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ -ENTRY(_bfin_reset) - /* No more interrupts to be handled*/ - CLI R6; - SSYNC; - -#if defined(CONFIG_BFIN_SHARED_FLASH_ENET) - p0.h = hi(FIO_INEN); - p0.l = lo(FIO_INEN); - r0.l = ~(1 << CONFIG_ENET_FLASH_PIN); - w[p0] = r0.l; - - p0.h = hi(FIO_DIR); - p0.l = lo(FIO_DIR); - r0.l = (1 << CONFIG_ENET_FLASH_PIN); - w[p0] = r0.l; - - p0.h = hi(FIO_FLAG_C); - p0.l = lo(FIO_FLAG_C); - r0.l = (1 << CONFIG_ENET_FLASH_PIN); - w[p0] = r0.l; -#endif - - /* Clear the IMASK register */ - p0.h = hi(IMASK); - p0.l = lo(IMASK); - r0 = 0x0; - [p0] = r0; - - /* Clear the ILAT register */ - p0.h = hi(ILAT); - p0.l = lo(ILAT); - r0 = [p0]; - [p0] = r0; - SSYNC; - - /* make sure SYSCR is set to use BMODE */ - P0.h = hi(SYSCR); - P0.l = lo(SYSCR); - R0.l = 0x0; - W[P0] = R0.l; - SSYNC; - - /* issue a system soft reset */ - P1.h = hi(SWRST); - P1.l = lo(SWRST); - R1.l = 0x0007; - W[P1] = R1; - SSYNC; - - /* clear system soft reset */ - R0.l = 0x0000; - W[P0] = R0; - SSYNC; - - /* issue core reset */ - raise 1; - - RTS; -ENDPROC(_bfin_reset) - -#if CONFIG_DEBUG_KERNEL_START -debug_kernel_start_trap: - /* Set up a temp stack in L1 - SDRAM might not be working */ - P0.L = lo(L1_DATA_A_START + 0x100); - P0.H = hi(L1_DATA_A_START + 0x100); - SP = P0; - - /* Make sure the Clocks are the way I think they should be */ - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -.Lcheck_again1: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump .Lcheck_again1; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - /* Make sure UART is enabled - you can never be sure */ - -/* - * Setup for console. Argument comes from the menuconfig - */ - -#ifdef CONFIG_BAUD_9600 -#define CONSOLE_BAUD_RATE 9600 -#elif CONFIG_BAUD_19200 -#define CONSOLE_BAUD_RATE 19200 -#elif CONFIG_BAUD_38400 -#define CONSOLE_BAUD_RATE 38400 -#elif CONFIG_BAUD_57600 -#define CONSOLE_BAUD_RATE 57600 -#elif CONFIG_BAUD_115200 -#define CONSOLE_BAUD_RATE 115200 -#endif - - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); - r0 = 0x00(Z); - w[p0] = r0.L; /* To Turn off UART clocks */ - ssync; - - p0.h = hi(UART_LCR); - p0.l = lo(UART_LCR); - r0 = 0x83(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - R1 = (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_SCLK_DIV) / (CONSOLE_BAUD_RATE * 16)); - - p0.h = hi(UART_DLL); - p0.l = lo(UART_DLL); - r0 = 0xFF(Z); - r0 = R1 & R0; - w[p0] = r0.L; - ssync; - - p0.h = hi(UART_DLH); - p0.l = lo(UART_DLH); - r1 >>= 8 ; - w[p0] = r1.L; - ssync; - - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - p0.h = hi(UART_LCR); - p0.l = lo(UART_LCR); - r0 = 0x03(Z); - w[p0] = r0.L; /* To Turn on UART */ - ssync; - - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); - r0 = 0x01(Z); - w[p0] = r0.L; /* To Turn on UART Clocks */ - ssync; - - P0.h = hi(UART_THR); - P0.l = lo(UART_THR); - P1.h = hi(UART_LSR); - P1.l = lo(UART_LSR); - - R0.L = 'K'; - call .Lwait_char; - R0.L='e'; - call .Lwait_char; - R0.L='r'; - call .Lwait_char; - R0.L='n' - call .Lwait_char; - R0.L='e' - call .Lwait_char; - R0.L='l'; - call .Lwait_char; - R0.L=' '; - call .Lwait_char; - R0.L='c'; - call .Lwait_char; - R0.L='r'; - call .Lwait_char; - R0.L='a'; - call .Lwait_char; - R0.L='s'; - call .Lwait_char; - R0.L='h'; - call .Lwait_char; - R0.L='\r'; - call .Lwait_char; - R0.L='\n'; - call .Lwait_char; - - R0.L='S'; - call .Lwait_char; - R0.L='E'; - call .Lwait_char; - R0.L='Q' - call .Lwait_char; - R0.L='S' - call .Lwait_char; - R0.L='T'; - call .Lwait_char; - R0.L='A'; - call .Lwait_char; - R0.L='T'; - call .Lwait_char; - R0.L='='; - call .Lwait_char; - R2 = SEQSTAT; - call .Ldump_reg; - - R0.L=' '; - call .Lwait_char; - R0.L='R'; - call .Lwait_char; - R0.L='E' - call .Lwait_char; - R0.L='T' - call .Lwait_char; - R0.L='X'; - call .Lwait_char; - R0.L='='; - call .Lwait_char; - R2 = RETX; - call .Ldump_reg; - - R0.L='\r'; - call .Lwait_char; - R0.L='\n'; - call .Lwait_char; - -.Ldebug_kernel_start_trap_done: - JUMP .Ldebug_kernel_start_trap_done; -.Ldump_reg: - R3 = 32; - R4 = 0x0F; - R5 = ':'; /* one past 9 */ - -.Ldump_reg2: - R0 = R2; - R3 += -4; - R0 >>>= R3; - R0 = R0 & R4; - R0 += 0x30; - CC = R0 <= R5; - if CC JUMP .Ldump_reg1; - R0 += 7; - -.Ldump_reg1: - R1.l = W[P1]; - CC = BITTST(R1, 5); - if !CC JUMP .Ldump_reg1; - W[P0] = r0; - - CC = R3 == 0; - if !CC JUMP .Ldump_reg2 - RTS; - -.Lwait_char: - R1.l = W[P1]; - CC = BITTST(R1, 5); - if !CC JUMP .Lwait_char; - W[P0] = r0; - RTS; - -#endif /* CONFIG_DEBUG_KERNEL_START */ - .data /* diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig index cc9ae38a4dd..e6648db0951 100644 --- a/arch/blackfin/mach-bf537/Kconfig +++ b/arch/blackfin/mach-bf537/Kconfig @@ -2,33 +2,6 @@ if (BF537 || BF534 || BF536) menu "BF537 Specific Configuration" -comment "PORT F/G Selection" -choice - prompt "Select BF537/6/4 default GPIO PFx PORTx" - help - Quick Hack for BF537/6/4 default GPIO PFx PORTF. - -config BF537_PORT_F - bool "Select BF537/6/4 default GPIO PFx PORTF" - depends on (BF537 || BF536 || BF534) - help - Quick Hack for BF537/6/4 default GPIO PFx PORTF. - -config BF537_PORT_G - bool "Select BF537/6/4 default GPIO PFx PORTG" - depends on (BF537 || BF536 || BF534) - help - Quick Hack for BF537/6/4 default GPIO PFx PORTG. - -config BF537_PORT_H - bool "Select BF537/6/4 default GPIO PFx PORTH" - depends on (BF537 || BF536 || BF534) - help - Quick Hack for BF537/6/4 default GPIO PFx PORTH - Use only when Blackfin EMAC support is not required. - -endchoice - comment "Interrupt Priority Assignment" menu "Priority" diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index a8f947b7275..44dea05e1d0 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -35,7 +35,9 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb_isp1362.h> +#include <linux/pata_platform.h> #include <linux/irq.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> /* @@ -113,7 +115,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -125,7 +127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -136,7 +138,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -146,7 +148,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -156,7 +158,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 7, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -165,7 +167,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -174,17 +176,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -316,6 +334,43 @@ static struct platform_device bfin_mac_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 64 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2030C000, + .end = 0x2030C01F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2030D018, + .end = 0x2030D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *cm_bf537_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -347,7 +402,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, #endif }; @@ -358,6 +417,10 @@ static int __init cm_bf537_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 648d984e98d..5e9d09eb857 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2007 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -34,20 +34,74 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb_isp1362.h> +#endif +#include <linux/pata_platform.h> #include <linux/irq.h> +#include <linux/interrupt.h> #include <linux/usb_sl811.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/reboot.h> +#include <linux/spi/ad7877.h> /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "UNKNOWN BOARD"; +char *bfin_board_name = "GENERIC Board"; /* * Driver needs to know address, irq and flag pin. */ +#define ISP1761_BASE 0x203C0000 +#define ISP1761_IRQ IRQ_PF7 + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +static struct resource bfin_isp1761_resources[] = { + [0] = { + .name = "isp1761-regs", + .start = ISP1761_BASE + 0x00000000, + .end = ISP1761_BASE + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ISP1761_IRQ, + .end = ISP1761_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_isp1761_device = { + .name = "isp1761", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_isp1761_resources), + .resource = bfin_isp1761_resources, +}; + +static struct platform_device *bfin_isp1761_devices[] = { + &bfin_isp1761_device, +}; + +int __init bfin_isp1761_init(void) +{ + unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); + + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); + + return platform_add_devices(bfin_isp1761_devices, num_devices); +} + +void __exit bfin_isp1761_exit(void) +{ + platform_device_unregister(&bfin_isp1761_device); +} + +arch_initcall(bfin_isp1761_init); +#endif + #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) static struct resource bfin_pcmcia_cf_resources[] = { { @@ -59,10 +113,6 @@ static struct resource bfin_pcmcia_cf_resources[] = { .end = 0x20311FFF, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PROG_INTA, - .end = IRQ_PROG_INTA, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, { .start = IRQ_PF4, .end = IRQ_PF4, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, @@ -96,14 +146,7 @@ static struct resource smc91x_resources[] = { .end = 0x20300300 + 16, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - /* - * denotes the flag pin and is used directly if - * CONFIG_IRQCHIP_DEMUX_GPIO is defined. - */ + .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -117,6 +160,28 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource dm9000_resources[] = { + [0] = { + .start = 0x203FB800, + .end = 0x203FB800 + 8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), + }, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, +}; +#endif + #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) static struct resource sl811_hcd_resources[] = { { @@ -128,12 +193,8 @@ static struct resource sl811_hcd_resources[] = { .end = 0x20340004, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PROG_INTA, - .end = IRQ_PROG_INTA, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO, - .end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO, + .start = CONFIG_USB_SL811_BFIN_IRQ, + .end = CONFIG_USB_SL811_BFIN_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; @@ -141,21 +202,19 @@ static struct resource sl811_hcd_resources[] = { #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) void sl811_port_power(struct device *dev, int is_on) { - unsigned short mask = (1<<CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); if (is_on) - bfin_write_FIO_FLAG_S(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); else - bfin_write_FIO_FLAG_C(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif static struct sl811_platform_data sl811_priv = { .potpg = 10, - .power = 250, /* == 500mA */ + .power = 250, /* == 500mA */ #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) .port_power = &sl811_port_power, #endif @@ -170,7 +229,6 @@ static struct platform_device sl811_hcd_device = { .num_resources = ARRAY_SIZE(sl811_hcd_resources), .resource = sl811_hcd_resources, }; - #endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -184,13 +242,9 @@ static struct resource isp1362_hcd_resources[] = { .end = 0x20360004, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PROG_INTA, - .end = IRQ_PROG_INTA, + .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO, - .end = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO, - .flags = IORESOURCE_IRQ, }, }; @@ -246,7 +300,8 @@ static struct platform_device net2272_bfin_device = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader", @@ -302,70 +357,198 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_PBX) +static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { + .ctl_reg = 0x4, /* send zero */ + .enable_dma = 0, + .bits_per_word = 8, + .cs_change_per_word = 1, +}; +#endif + +#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) +static struct bfin5xx_spi_chip ad5304_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ - .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, #endif - #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, #endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_PBX) + { + .modalias = "fxs-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, + .controller_data = &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "fxo-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, + .controller_data = &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) + { + .modalias = "ad5304_spi", + .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .platform_data = NULL, + .controller_data = &ad5304_chip_info, + .mode = SPI_MODE_2, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) + { + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PF6, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 1, + .controller_data = &spi_ad7877_chip_info, + }, +#endif }; /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) static struct platform_device bfin_fb_device = { - .name = "bf537-fb", + .name = "bf537-lq035", +}; +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", }; #endif @@ -390,15 +573,86 @@ static struct platform_device bfin_uart_device = { }; #endif -static struct platform_device *stamp_devices[] __initdata = { -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) - &rtc_device, +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; #endif +static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) &bfin_pcmcia_cf_device, #endif +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) &sl811_hcd_device, #endif @@ -411,6 +665,10 @@ static struct platform_device *stamp_devices[] __initdata = { &smc91x_device, #endif +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + &dm9000_device, +#endif + #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) &bfin_mac_device, #endif @@ -420,16 +678,33 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) &bfin_fb_device, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init stamp_init(void) @@ -437,9 +712,21 @@ static int __init stamp_init(void) printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif return 0; } arch_initcall(stamp_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_gpio_reset_spi0_ssel1(); +} diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 8806f1230f2..20507e92a3a 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -38,6 +38,7 @@ #include <linux/usb_isp1362.h> #endif #include <linux/irq.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <linux/usb_sl811.h> @@ -130,15 +131,13 @@ static struct resource sl811_hcd_resources[] = { #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) void sl811_port_power(struct device *dev, int is_on) { - unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); if (is_on) - bfin_write_FIO_FLAG_S(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); else - bfin_write_FIO_FLAG_C(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif @@ -323,7 +322,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -336,7 +335,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -348,7 +347,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -357,7 +356,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -366,7 +365,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 7, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -375,7 +374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -396,24 +395,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) static struct platform_device bfin_fb_device = { - .name = "bf537-fb", + .name = "bf537-lq035", }; #endif @@ -469,7 +484,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9c43d775651..47d7d4a0e73 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -37,10 +37,13 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb_isp1362.h> #endif +#include <linux/pata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/usb_sl811.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/reboot.h> #include <linux/spi/ad7877.h> /* @@ -199,15 +202,13 @@ static struct resource sl811_hcd_resources[] = { #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) void sl811_port_power(struct device *dev, int is_on) { - unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); if (is_on) - bfin_write_FIO_FLAG_S(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); else - bfin_write_FIO_FLAG_C(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif @@ -407,7 +408,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -420,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -432,7 +433,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -441,7 +442,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -450,7 +451,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 0, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -459,7 +460,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -470,16 +471,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "fxs-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 3, + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, { .modalias = "fxo-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 2, + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, @@ -488,7 +489,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad5304_spi", .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 2, .platform_data = NULL, .controller_data = &ad5304_chip_info, @@ -509,23 +510,45 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) static struct platform_device bfin_fb_device = { - .name = "bf537-fb", + .name = "bf537-lq035", +}; +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", }; #endif @@ -551,9 +574,24 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device i2c_bfin_twi_device = { .name = "i2c-bfin-twi", .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, }; #endif @@ -569,6 +607,43 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) &bfin_pcmcia_cf_device, @@ -603,13 +678,17 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) &bfin_fb_device, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif @@ -622,6 +701,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport0_uart_device, &bfin_sport1_uart_device, #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init stamp_init(void) @@ -632,7 +715,18 @@ static int __init stamp_init(void) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } arch_initcall(stamp_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_gpio_reset_spi0_ssel1(); +} diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 429c8a1019d..3014fe8dd15 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -33,6 +33,7 @@ #include <asm/trace.h> #if CONFIG_BFIN_KERNEL_CLOCK +#include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif @@ -50,10 +51,12 @@ __INIT ENTRY(__start) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; - /* Set the SYSCFG register: - * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit) - */ - R0 = 0x36; + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif SYSCFG = R0; R0 = 0; @@ -95,43 +98,43 @@ ENTRY(__start) M2 = r0; M3 = r0; - trace_buffer_start(p0,r0); + trace_buffer_init(p0,r0); P0 = R1; R0 = R1; /* Turn off the icache */ - p0.l = (IMEM_CONTROL & 0xFFFF); - p0.h = (IMEM_CONTROL >> 16); + p0.l = LO(IMEM_CONTROL); + p0.h = HI(IMEM_CONTROL); R1 = [p0]; R0 = ~ENICPLB; R0 = R0 & R1; /* Anomaly 05000125 */ -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 CLI R2; SSYNC; #endif [p0] = R0; SSYNC; -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 STI R2; #endif /* Turn off the dcache */ - p0.l = (DMEM_CONTROL & 0xFFFF); - p0.h = (DMEM_CONTROL >> 16); + p0.l = LO(DMEM_CONTROL); + p0.h = HI(DMEM_CONTROL); R1 = [p0]; R0 = ~ENDCPLB; R0 = R0 & R1; /* Anomaly 05000125 */ -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 CLI R2; SSYNC; #endif [p0] = R0; SSYNC; -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 STI R2; #endif @@ -141,12 +144,12 @@ ENTRY(__start) */ p0.h = hi(BFIN_PORT_MUX); p0.l = lo(BFIN_PORT_MUX); -#ifdef ANOMALY_05000212 +#if ANOMALY_05000212 R0.L = W[P0]; /* Read */ SSYNC; #endif R0 = (PGDE_UART | PFTE_UART)(Z); -#ifdef ANOMALY_05000212 +#if ANOMALY_05000212 W[P0] = R0.L; /* Write */ SSYNC; #endif @@ -155,12 +158,12 @@ ENTRY(__start) p0.h = hi(PORTF_FER); p0.l = lo(PORTF_FER); -#ifdef ANOMALY_05000212 +#if ANOMALY_05000212 R0.L = W[P0]; /* Read */ SSYNC; #endif R0 = 0x000F(Z); -#ifdef ANOMALY_05000212 +#if ANOMALY_05000212 W[P0] = R0.L; /* Write */ SSYNC; #endif @@ -221,6 +224,12 @@ ENTRY(__start) fp = sp; usp = sp; +#ifdef CONFIG_EARLY_PRINTK + SP += -12; + call _init_early_exception_vectors; + SP += 12; +#endif + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; #if CONFIG_BFIN_KERNEL_CLOCK @@ -274,7 +283,7 @@ ENTRY(__start) p0.l = .LWAIT_HERE; p0.h = .LWAIT_HERE; reti = p0; -#if defined(ANOMALY_05000281) +#if ANOMALY_05000281 nop; nop; nop; #endif rti; @@ -436,8 +445,8 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + p0.l = LO(EBIU_SDBCTL); + p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ r0 = mem_SDBCTL; w[p0] = r0.l; ssync; @@ -475,85 +484,6 @@ ENTRY(_start_dma_code) ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ -ENTRY(_bfin_reset) - /* No more interrupts to be handled*/ - CLI R6; - SSYNC; - -#if defined(CONFIG_MTD_M25P80) - /* - * The following code fix the SPI flash reboot issue, - * /CS signal of the chip which is using PF10 return to GPIO mode - */ - p0.h = hi(PORTF_FER); - p0.l = lo(PORTF_FER); - r0.l = 0x0000; - w[p0] = r0.l; - SSYNC; - - /* /CS return to high */ - p0.h = hi(PORTFIO); - p0.l = lo(PORTFIO); - r0.l = 0xFFFF; - w[p0] = r0.l; - SSYNC; - - /* Delay some time, This is necessary */ - r1.h = 0; - r1.l = 0x400; - p1 = r1; - lsetup (.L_delay_lab1, .L_delay_lab1_end) lc1 = p1; -.L_delay_lab1: - r0.h = 0; - r0.l = 0x8000; - p0 = r0; - lsetup (.L_delay_lab0, .L_delay_lab0_end) lc0 = p0; -.L_delay_lab0: - nop; -.L_delay_lab0_end: - nop; -.L_delay_lab1_end: - nop; -#endif - - /* Clear the IMASK register */ - p0.h = hi(IMASK); - p0.l = lo(IMASK); - r0 = 0x0; - [p0] = r0; - - /* Clear the ILAT register */ - p0.h = hi(ILAT); - p0.l = lo(ILAT); - r0 = [p0]; - [p0] = r0; - SSYNC; - - /* make sure SYSCR is set to use BMODE */ - P0.h = hi(SYSCR); - P0.l = lo(SYSCR); - R0.l = 0x0; - W[P0] = R0.l; - SSYNC; - - /* issue a system soft reset */ - P1.h = hi(SWRST); - P1.l = lo(SWRST); - R1.l = 0x0007; - W[P1] = R1; - SSYNC; - - /* clear system soft reset */ - R0.l = 0x0000; - W[P0] = R0; - SSYNC; - - /* issue core reset */ - raise 1; - - RTS; -ENDPROC(_bfin_reset) - .data /* diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index e78b03d56c7..08d8dc83701 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -2,6 +2,13 @@ if (BF54x) menu "BF548 Specific Configuration" +config DEB_DMA_URGENT + bool "DMA has priority over core for ext. accesses" + depends on BF54x + default n + help + Treat any DEB1, DEB2 and DEB3 request as Urgent + comment "Interrupt Priority Assignment" menu "Priority" @@ -282,7 +289,7 @@ menu "Assignment" config PINTx_REASSIGN bool "Reprogram PINT Assignment" - default n + default y help The interrupt assignment registers controls the pin-to-interrupt assignment in a byte-wide manner. Each option allows you to select @@ -303,7 +310,7 @@ config PINT1_ASSIGN config PINT2_ASSIGN hex "PINT2_ASSIGN" depends on PINTx_REASSIGN - default 0x00000101 + default 0x07000101 config PINT3_ASSIGN hex "PINT3_ASSIGN" depends on PINTx_REASSIGN diff --git a/arch/blackfin/mach-bf548/Makefile b/arch/blackfin/mach-bf548/Makefile index 060ad78ebf1..7e7c9c8ac5b 100644 --- a/arch/blackfin/mach-bf548/Makefile +++ b/arch/blackfin/mach-bf548/Makefile @@ -4,6 +4,6 @@ extra-y := head.o -obj-y := ints-priority.o dma.o gpio.o +obj-y := ints-priority.o dma.o obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 96ad95fab1a..2c47db494f7 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -35,9 +35,16 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/irq.h> -#include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/usb/musb.h> #include <asm/bfin5xx_spi.h> +#include <asm/cplb.h> +#include <asm/dma.h> +#include <asm/gpio.h> +#include <asm/nand.h> +#include <asm/mach/bf54x_keys.h> +#include <linux/input.h> +#include <linux/spi/ad7877.h> /* * Name the Board for the /proc/cpuinfo @@ -48,6 +55,88 @@ char *bfin_board_name = "ADSP-BF548-EZKIT"; * Driver needs to know address, irq and flag pin. */ +#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) + +#include <asm/mach/bf54x-lq043.h> + +static struct bfin_bf54xfb_mach_info bf54x_lq043_data = { + .width = 480, + .height = 272, + .xres = {480, 480, 480}, + .yres = {272, 272, 272}, + .bpp = {24, 24, 24}, + .disp = GPIO_PE3, +}; + +static struct resource bf54x_lq043_resources[] = { + { + .start = IRQ_EPPI0_ERR, + .end = IRQ_EPPI0_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf54x_lq043_device = { + .name = "bf54x-lq043", + .id = -1, + .num_resources = ARRAY_SIZE(bf54x_lq043_resources), + .resource = bf54x_lq043_resources, + .dev = { + .platform_data = &bf54x_lq043_data, + }, +}; +#endif + +#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +static int bf548_keymap[] = { + KEYVAL(0, 0, KEY_ENTER), + KEYVAL(0, 1, KEY_HELP), + KEYVAL(0, 2, KEY_0), + KEYVAL(0, 3, KEY_BACKSPACE), + KEYVAL(1, 0, KEY_TAB), + KEYVAL(1, 1, KEY_9), + KEYVAL(1, 2, KEY_8), + KEYVAL(1, 3, KEY_7), + KEYVAL(2, 0, KEY_DOWN), + KEYVAL(2, 1, KEY_6), + KEYVAL(2, 2, KEY_5), + KEYVAL(2, 3, KEY_4), + KEYVAL(3, 0, KEY_UP), + KEYVAL(3, 1, KEY_3), + KEYVAL(3, 2, KEY_2), + KEYVAL(3, 3, KEY_1), +}; + +static struct bfin_kpad_platform_data bf54x_kpad_data = { + .rows = 4, + .cols = 4, + .keymap = bf548_keymap, + .keymapsize = ARRAY_SIZE(bf548_keymap), + .repeat = 0, + .debounce_time = 5000, /* ns (5ms) */ + .coldrive_time = 1000, /* ns (1ms) */ + .keyup_test_interval = 50, /* ms (50ms) */ +}; + +static struct resource bf54x_kpad_resources[] = { + { + .start = IRQ_KEY, + .end = IRQ_KEY, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf54x_kpad_device = { + .name = "bf54x-keys", + .id = -1, + .num_resources = ARRAY_SIZE(bf54x_kpad_resources), + .resource = bf54x_kpad_resources, + .dev = { + .platform_data = &bf54x_kpad_data, + }, +}; +#endif + #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { .name = "rtc-bfin", @@ -94,6 +183,344 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +static struct resource smsc911x_resources[] = { + { + .name = "smsc911x-memory", + .start = 0x24000000, + .end = 0x24000000 + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE8, + .end = IRQ_PE8, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; +#endif + +#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) +static struct resource bf54x_hcd_resources[] = { + { + .start = 0xFFC03C00, + .end = 0xFFC040FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bf54x_hcd = { + .name = "bf54x-hcd", + .id = 0, + .num_resources = ARRAY_SIZE(bf54x_hcd_resources), + .resource = bf54x_hcd_resources, +}; +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +static struct resource musb_resources[] = { + [0] = { + .start = 0xFFC03C00, + .end = 0xFFC040FF, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = IRQ_USB_INT0, + .end = IRQ_USB_INT0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, + [2] = { /* DMA IRQ */ + .start = IRQ_USB_DMA, + .end = IRQ_USB_DMA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#ifdef CONFIG_USB_MUSB_OTG + .mode = MUSB_OTG, +#elif CONFIG_USB_MUSB_HDRC_HCD + .mode = MUSB_HOST, +#elif CONFIG_USB_GADGET_MUSB_HDRC + .mode = MUSB_PERIPHERAL, +#endif + .multipoint = 1, +}; + +static u64 musb_dmamask = ~(u32)0; + +static struct platform_device musb_device = { + .name = "musb_hdrc", + .id = 0, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; +#endif + +#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +static struct resource bfin_atapi_resources[] = { + { + .start = 0xFFC03800, + .end = 0xFFC0386F, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ATAPI_ERR, + .end = IRQ_ATAPI_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_atapi_device = { + .name = "pata-bf54x", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_atapi_resources), + .resource = bfin_atapi_resources, +}; +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +static struct mtd_partition partition_info[] = { + { + .name = "Linux Kernel", + .offset = 0, + .size = 4 * SIZE_1M, + }, + { + .name = "File System", + .offset = 4 * SIZE_1M, + .size = (256 - 4) * SIZE_1M, + }, +}; + +static struct bf5xx_nand_platform bf5xx_nand_platform = { + .page_size = NFC_PG_SIZE_256, + .data_width = NFC_NWIDTH_8, + .partitions = partition_info, + .nr_partitions = ARRAY_SIZE(partition_info), + .rd_dly = 3, + .wr_dly = 3, +}; + +static struct resource bf5xx_nand_resources[] = { + { + .start = 0xFFC03B00, + .end = 0xFFC03B4F, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_NFC, + .end = CH_NFC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf5xx_nand_device = { + .name = "bf5xx-nand", + .id = 0, + .num_resources = ARRAY_SIZE(bf5xx_nand_resources), + .resource = bf5xx_nand_resources, + .dev = { + .platform_data = &bf5xx_nand_platform, + }, +}; +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN) +static struct platform_device bf54x_sdh_device = { + .name = "bfin-sdh", + .id = 0, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +/* SPI flash chip (m25p16) */ +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel", + .size = 0x1c0000, + .offset = 0x40000 + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p16", +}; + +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, + .cs_change_per_word = 0, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .cs_change_per_word = 1, + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +static struct spi_board_info bf54x_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* SPI_SSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +{ + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PJ11, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &spi_ad7877_chip_info, +}, +#endif +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI0, + .end = CH_SPI0, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI (1) */ +static struct resource bfin_spi1_resource[] = { + [0] = { + .start = SPI1_REGBASE, + .end = SPI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI1, + .end = CH_SPI1, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bf54x_spi_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device bf54x_spi_master0 = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bf54x_spi_master_info, /* Passed to driver */ + }, +}; + +static struct platform_device bf54x_spi_master1 = { + .name = "bfin-spi", + .id = 1, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi1_resource), + .resource = bfin_spi1_resource, + .dev = { + .platform_data = &bf54x_spi_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI0, + .end = IRQ_TWI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi0_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; + +static struct resource bfin_twi1_resource[] = { + [0] = { + .start = TWI1_REGBASE, + .end = TWI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI1, + .end = IRQ_TWI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi1_device = { + .name = "i2c-bfin-twi", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_twi1_resource), + .resource = bfin_twi1_resource, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -102,12 +529,60 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) + &bf54x_lq043_device, +#endif + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) + &smsc911x_device, +#endif + +#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) + &bf54x_hcd, +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) + &musb_device, +#endif + +#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) + &bfin_atapi_device, +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) + &bf5xx_nand_device, +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN) + &bf54x_sdh_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bf54x_spi_master0, +/* &bf54x_spi_master1,*/ +#endif + +#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) + &bf54x_kpad_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi0_device, + &i2c_bfin_twi1_device, +#endif }; static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bf54x_spi_board_info, + ARRAY_SIZE(bf54x_spi_board_info)); +#endif + return 0; } diff --git a/arch/blackfin/mach-bf548/gpio.c b/arch/blackfin/mach-bf548/gpio.c deleted file mode 100644 index 0da5f0003b8..00000000000 --- a/arch/blackfin/mach-bf548/gpio.c +++ /dev/null @@ -1,323 +0,0 @@ -/* - * File: arch/blackfin/mach-bf548/gpio.c - * Based on: - * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) - * - * Created: - * Description: GPIO Abstraction Layer - * - * Modified: - * Copyright 2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/module.h> -#include <linux/err.h> -#include <asm/blackfin.h> -#include <asm/gpio.h> -#include <asm/portmux.h> -#include <linux/irq.h> - -static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { - (struct gpio_port_t *)PORTA_FER, - (struct gpio_port_t *)PORTB_FER, - (struct gpio_port_t *)PORTC_FER, - (struct gpio_port_t *)PORTD_FER, - (struct gpio_port_t *)PORTE_FER, - (struct gpio_port_t *)PORTF_FER, - (struct gpio_port_t *)PORTG_FER, - (struct gpio_port_t *)PORTH_FER, - (struct gpio_port_t *)PORTI_FER, - (struct gpio_port_t *)PORTJ_FER, -}; - -static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; -static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; - -inline int check_gpio(unsigned short gpio) -{ - if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 - || gpio == GPIO_PH14 || gpio == GPIO_PH15 - || gpio == GPIO_PJ14 || gpio == GPIO_PJ15 - || gpio > MAX_BLACKFIN_GPIOS) - return -EINVAL; - return 0; -} - -inline void portmux_setup(unsigned short portno, unsigned short function) -{ - u32 pmux; - - pmux = gpio_array[gpio_bank(portno)]->port_mux; - - pmux &= ~(0x3 << (2 * gpio_sub_n(portno))); - pmux |= (function & 0x3) << (2 * gpio_sub_n(portno)); - - gpio_array[gpio_bank(portno)]->port_mux = pmux; - -} - -inline u16 get_portmux(unsigned short portno) -{ - u32 pmux; - - pmux = gpio_array[gpio_bank(portno)]->port_mux; - - return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); - -} - -static void port_setup(unsigned short gpio, unsigned short usage) -{ - if (usage == GPIO_USAGE) { - if (gpio_array[gpio_bank(gpio)]->port_fer & gpio_bit(gpio)) - printk(KERN_WARNING - "bfin-gpio: Possible Conflict with Peripheral " - "usage and GPIO %d detected!\n", gpio); - gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); - } else - gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); - SSYNC(); -} - -static int __init bfin_gpio_init(void) -{ - printk(KERN_INFO "Blackfin GPIO Controller\n"); - - return 0; -} - -arch_initcall(bfin_gpio_init); - -int peripheral_request(unsigned short per, const char *label) -{ - unsigned long flags; - unsigned short ident = P_IDENT(per); - - if (!(per & P_DEFINED)) - return -ENODEV; - - if (check_gpio(ident) < 0) - return -EINVAL; - - local_irq_save(flags); - - if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { - printk(KERN_ERR - "%s: Peripheral %d is already reserved as GPIO!\n", - __FUNCTION__, per); - dump_stack(); - local_irq_restore(flags); - return -EBUSY; - } - - if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { - - u16 funct = get_portmux(ident); - - if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { - printk(KERN_ERR - "%s: Peripheral %d is already reserved!\n", - __FUNCTION__, per); - dump_stack(); - local_irq_restore(flags); - return -EBUSY; - } - } - - reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); - - portmux_setup(ident, P_FUNCT2MUX(per)); - port_setup(ident, PERIPHERAL_USAGE); - - local_irq_restore(flags); - - return 0; -} -EXPORT_SYMBOL(peripheral_request); - -int peripheral_request_list(unsigned short per[], const char *label) -{ - - u16 cnt; - int ret; - - for (cnt = 0; per[cnt] != 0; cnt++) { - ret = peripheral_request(per[cnt], label); - if (ret < 0) - return ret; - } - - return 0; -} -EXPORT_SYMBOL(peripheral_request_list); - -void peripheral_free(unsigned short per) -{ - unsigned long flags; - unsigned short ident = P_IDENT(per); - - if (!(per & P_DEFINED)) - return; - - if (check_gpio(ident) < 0) - return; - - local_irq_save(flags); - - if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { - printk(KERN_ERR "bfin-gpio: Peripheral %d wasn't reserved!\n", per); - dump_stack(); - local_irq_restore(flags); - return; - } - - if (!(per & P_MAYSHARE)) { - port_setup(ident, GPIO_USAGE); - } - - reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident); - - local_irq_restore(flags); -} -EXPORT_SYMBOL(peripheral_free); - -void peripheral_free_list(unsigned short per[]) -{ - u16 cnt; - - for (cnt = 0; per[cnt] != 0; cnt++) { - peripheral_free(per[cnt]); - } - -} -EXPORT_SYMBOL(peripheral_free_list); - -/*********************************************************** -* -* FUNCTIONS: Blackfin GPIO Driver -* -* INPUTS/OUTPUTS: -* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS -* -* -* DESCRIPTION: Blackfin GPIO Driver API -* -* CAUTION: -************************************************************* -* MODIFICATION HISTORY : -**************************************************************/ - -int gpio_request(unsigned short gpio, const char *label) -{ - unsigned long flags; - - if (check_gpio(gpio) < 0) - return -EINVAL; - - local_irq_save(flags); - - if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio); - dump_stack(); - local_irq_restore(flags); - return -EBUSY; - } - - if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - printk(KERN_ERR - "bfin-gpio: GPIO %d is already reserved as Peripheral!\n", gpio); - dump_stack(); - local_irq_restore(flags); - return -EBUSY; - } - - reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); - - local_irq_restore(flags); - - port_setup(gpio, GPIO_USAGE); - - return 0; -} -EXPORT_SYMBOL(gpio_request); - -void gpio_free(unsigned short gpio) -{ - unsigned long flags; - - if (check_gpio(gpio) < 0) - return; - - local_irq_save(flags); - - if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { - printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio); - dump_stack(); - local_irq_restore(flags); - return; - } - - reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); - - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_free); - -void gpio_direction_input(unsigned short gpio) -{ - unsigned long flags; - - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); - - local_irq_save(flags); - gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); - gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_direction_input); - -void gpio_direction_output(unsigned short gpio) -{ - unsigned long flags; - - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); - - local_irq_save(flags); - gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); - gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_direction_output); - -void gpio_set_value(unsigned short gpio, unsigned short arg) -{ - if (arg) - gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); - else - gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); - -} -EXPORT_SYMBOL(gpio_set_value); - -unsigned short gpio_get_value(unsigned short gpio) -{ - return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); -} -EXPORT_SYMBOL(gpio_get_value); diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 06751ae8b85..3071c243d42 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -31,6 +31,7 @@ #include <asm/blackfin.h> #include <asm/trace.h> #if CONFIG_BFIN_KERNEL_CLOCK +#include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif @@ -49,9 +50,13 @@ ENTRY(__start) ENTRY(__stext) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; - /* Set the SYSCFG register */ - R0 = 0x36; - SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/ + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif + SYSCFG = R0; R0 = 0; /* Clear Out All the data and pointer Registers*/ @@ -92,13 +97,13 @@ ENTRY(__stext) M2 = r0; M3 = r0; - trace_buffer_start(p0,r0); + trace_buffer_init(p0,r0); P0 = R1; R0 = R1; /* Turn off the icache */ - p0.l = (IMEM_CONTROL & 0xFFFF); - p0.h = (IMEM_CONTROL >> 16); + p0.l = LO(IMEM_CONTROL); + p0.h = HI(IMEM_CONTROL); R1 = [p0]; R0 = ~ENICPLB; R0 = R0 & R1; @@ -106,8 +111,8 @@ ENTRY(__stext) SSYNC; /* Turn off the dcache */ - p0.l = (DMEM_CONTROL & 0xFFFF); - p0.h = (DMEM_CONTROL >> 16); + p0.l = LO(DMEM_CONTROL); + p0.h = HI(DMEM_CONTROL); R1 = [p0]; R0 = ~ENDCPLB; R0 = R0 & R1; @@ -120,6 +125,12 @@ ENTRY(__stext) FP = SP; USP = SP; +#ifdef CONFIG_EARLY_PRINTK + SP += -12; + call _init_early_exception_vectors; + SP += 12; +#endif + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; #if CONFIG_BFIN_KERNEL_CLOCK @@ -172,7 +183,7 @@ ENTRY(__stext) p0.l = .LWAIT_HERE; p0.h = .LWAIT_HERE; reti = p0; -#if defined (ANOMALY_05000281) +#if ANOMALY_05000281 nop; nop; nop; @@ -335,8 +346,8 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + p0.l = LO(EBIU_SDBCTL); + p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ r0 = mem_SDBCTL; w[p0] = r0.l; ssync; @@ -373,129 +384,6 @@ ENTRY(_start_dma_code) RTS; #endif /* CONFIG_BFIN_KERNEL_CLOCK */ -ENTRY(_bfin_reset) - /* No more interrupts to be handled*/ - CLI R6; - SSYNC; - -#if defined(CONFIG_MTD_M25P80) -/* - * The following code fix the SPI flash reboot issue, - * /CS signal of the chip which is using PF10 return to GPIO mode - */ - p0.h = hi(PORTF_FER); - p0.l = lo(PORTF_FER); - r0.l = 0x0000; - w[p0] = r0.l; - SSYNC; - -/* /CS return to high */ - p0.h = hi(PORTFIO); - p0.l = lo(PORTFIO); - r0.l = 0xFFFF; - w[p0] = r0.l; - SSYNC; - -/* Delay some time, This is necessary */ - r1.h = 0; - r1.l = 0x400; - p1 = r1; - lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1; -_delay_lab1: - r0.h = 0; - r0.l = 0x8000; - p0 = r0; - lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0; -_delay_lab0: - nop; -_delay_lab0_end: - nop; -_delay_lab1_end: - nop; -#endif - - /* Clear the bits 13-15 in SWRST if they werent cleared */ - p0.h = hi(SWRST); - p0.l = lo(SWRST); - csync; - r0.l = w[p0]; - - /* Clear the IMASK register */ - p0.h = hi(IMASK); - p0.l = lo(IMASK); - r0 = 0x0; - [p0] = r0; - - /* Clear the ILAT register */ - p0.h = hi(ILAT); - p0.l = lo(ILAT); - r0 = [p0]; - [p0] = r0; - SSYNC; - - /* Disable the WDOG TIMER */ - p0.h = hi(WDOG_CTL); - p0.l = lo(WDOG_CTL); - r0.l = 0xAD6; - w[p0] = r0.l; - SSYNC; - - /* Clear the sticky bit incase it is already set */ - p0.h = hi(WDOG_CTL); - p0.l = lo(WDOG_CTL); - r0.l = 0x8AD6; - w[p0] = r0.l; - SSYNC; - - /* Program the count value */ - R0.l = 0x100; - R0.h = 0x0; - P0.h = hi(WDOG_CNT); - P0.l = lo(WDOG_CNT); - [P0] = R0; - SSYNC; - - /* Program WDOG_STAT if necessary */ - P0.h = hi(WDOG_CTL); - P0.l = lo(WDOG_CTL); - R0 = W[P0](Z); - CC = BITTST(R0,1); - if !CC JUMP .LWRITESTAT; - CC = BITTST(R0,2); - if !CC JUMP .LWRITESTAT; - JUMP .LSKIP_WRITE; - -.LWRITESTAT: - /* When watch dog timer is enabled, - * a write to STAT will load the contents of CNT to STAT - */ - R0 = 0x0000(z); - P0.h = hi(WDOG_STAT); - P0.l = lo(WDOG_STAT) - [P0] = R0; - SSYNC; - -.LSKIP_WRITE: - /* Enable the reset event */ - P0.h = hi(WDOG_CTL); - P0.l = lo(WDOG_CTL); - R0 = W[P0](Z); - BITCLR(R0,1); - BITCLR(R0,2); - W[P0] = R0.L; - SSYNC; - NOP; - - /* Enable the wdog counter */ - R0 = W[P0](Z); - BITCLR(R0,4); - W[P0] = R0.L; - SSYNC; - - IDLE; - - RTS; - .data /* diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 5b2b544529a..cd827a1b6ba 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -34,7 +34,9 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb_isp1362.h> +#include <linux/pata_platform.h> #include <linux/irq.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> /* @@ -112,7 +114,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -124,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -135,7 +137,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -144,7 +146,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -153,7 +155,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -162,17 +164,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -256,6 +274,43 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 119 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2400C000, + .end = 0x2400C001F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2400D018, + .end = 0x2400D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *cm_bf561_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) @@ -271,9 +326,12 @@ static struct platform_device *cm_bf561_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init cm_bf561_init(void) @@ -283,6 +341,10 @@ static int __init cm_bf561_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 724191da20a..57e14edca8b 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -32,6 +32,8 @@ #include <linux/spi/spi.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/pata_platform.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> /* @@ -140,17 +142,33 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { #endif #endif +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; @@ -160,23 +178,63 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, #endif }; +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init ezkit_init(void) @@ -194,7 +252,15 @@ static int __init ezkit_init(void) SSYNC(); #endif - return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif + return 0; } arch_initcall(ezkit_init); diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 38650a62898..96a3d456fb6 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -33,6 +33,7 @@ #include <asm/trace.h> #if CONFIG_BFIN_KERNEL_CLOCK +#include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif @@ -50,10 +51,12 @@ __INIT ENTRY(__start) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; - /* Set the SYSCFG register: - * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit) - */ - R0 = 0x36; + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif SYSCFG = R0; R0 = 0; @@ -95,43 +98,42 @@ ENTRY(__start) M2 = r0; M3 = r0; - trace_buffer_start(p0,r0); + trace_buffer_init(p0,r0); P0 = R1; R0 = R1; /* Turn off the icache */ - p0.l = (IMEM_CONTROL & 0xFFFF); - p0.h = (IMEM_CONTROL >> 16); + p0.l = LO(IMEM_CONTROL); + p0.h = HI(IMEM_CONTROL); R1 = [p0]; R0 = ~ENICPLB; R0 = R0 & R1; - /* Anomaly 05000125 */ -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 CLI R2; SSYNC; #endif [p0] = R0; SSYNC; -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 STI R2; #endif /* Turn off the dcache */ - p0.l = (DMEM_CONTROL & 0xFFFF); - p0.h = (DMEM_CONTROL >> 16); + p0.l = LO(DMEM_CONTROL); + p0.h = HI(DMEM_CONTROL); R1 = [p0]; R0 = ~ENDCPLB; R0 = R0 & R1; /* Anomaly 05000125 */ -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 CLI R2; SSYNC; #endif [p0] = R0; SSYNC; -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 STI R2; #endif @@ -167,6 +169,12 @@ ENTRY(__start) fp = sp; usp = sp; +#ifdef CONFIG_EARLY_PRINTK + SP += -12; + call _init_early_exception_vectors; + SP += 12; +#endif + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; #if CONFIG_BFIN_KERNEL_CLOCK @@ -220,7 +228,7 @@ ENTRY(__start) p0.l = .LWAIT_HERE; p0.h = .LWAIT_HERE; reti = p0; -#if defined(ANOMALY_05000281) +#if ANOMALY_05000281 nop; nop; nop; #endif rti; @@ -372,8 +380,8 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + p0.l = LO(EBIU_SDBCTL); + p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ r0 = mem_SDBCTL; w[p0] = r0.l; ssync; @@ -404,66 +412,6 @@ ENTRY(_start_dma_code) ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ -ENTRY(_bfin_reset) - /* No more interrupts to be handled*/ - CLI R6; - SSYNC; - -#if defined(CONFIG_BFIN_SHARED_FLASH_ENET) - p0.h = hi(FIO_INEN); - p0.l = lo(FIO_INEN); - r0.l = ~(PF1 | PF0); - w[p0] = r0.l; - - p0.h = hi(FIO_DIR); - p0.l = lo(FIO_DIR); - r0.l = (PF1 | PF0); - w[p0] = r0.l; - - p0.h = hi(FIO_FLAG_C); - p0.l = lo(FIO_FLAG_C); - r0.l = (PF1 | PF0); - w[p0] = r0.l; -#endif - - /* Clear the IMASK register */ - p0.h = hi(IMASK); - p0.l = lo(IMASK); - r0 = 0x0; - [p0] = r0; - - /* Clear the ILAT register */ - p0.h = hi(ILAT); - p0.l = lo(ILAT); - r0 = [p0]; - [p0] = r0; - SSYNC; - - /* make sure SYSCR is set to use BMODE */ - P0.h = hi(SYSCR); - P0.l = lo(SYSCR); - R0.l = 0x20; /* on BF561, disable core b */ - W[P0] = R0.l; - SSYNC; - - /* issue a system soft reset */ - P1.h = hi(SWRST); - P1.l = lo(SWRST); - R1.l = 0x0007; - W[P1] = R1; - SSYNC; - - /* clear system soft reset */ - R0.l = 0x0000; - W[P0] = R0; - SSYNC; - - /* issue core reset */ - raise 1; - - RTS; -ENDPROC(_bfin_reset) - .data /* diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 0279ede7039..4d7733dfd5d 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -4,7 +4,7 @@ obj-y := \ cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \ - interrupt.o lock.o irqpanic.o + interrupt.o lock.o irqpanic.o arch_checks.o obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c new file mode 100644 index 00000000000..2f6ce397780 --- /dev/null +++ b/arch/blackfin/mach-common/arch_checks.c @@ -0,0 +1,60 @@ +/* + * File: arch/blackfin/mach-common/arch_checks.c + * Based on: + * Author: Robin Getz <rgetz@blackfin.uclinux.org> + * + * Created: 25Jul07 + * Description: Do some checking to make sure things are OK + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <asm/mach/anomaly.h> +#include <asm/mach-common/clocks.h> + +#ifdef CONFIG_BFIN_KERNEL_CLOCK + +# if (CONFIG_VCO_HZ > CONFIG_MAX_VCO_HZ) +# error "VCO selected is more than maximum value. Please change the VCO multipler" +# endif + +# if (CONFIG_SCLK_HZ > CONFIG_MAX_SCLK_HZ) +# error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" +# endif + +# if (CONFIG_SCLK_HZ < CONFIG_MIN_SCLK_HZ) +# error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" +# endif + +# if (ANOMALY_05000273) && (CONFIG_SCLK_HZ * 2 > CONFIG_CCLK_HZ) +# error "ANOMALY 05000273, please make sure CCLK is at least 2x SCLK" +# endif + +# if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) && (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) && (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) +# error "Please select sclk less than cclk" +# endif + +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +#if (CONFIG_MEM_SIZE % 4) +#error "SDRAM mem size must be multible of 4MB" +#endif + diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index 7063795eb7c..0521b158820 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -79,8 +79,8 @@ ENTRY(_icache_invalidate) ENTRY(_invalidate_entire_icache) [--SP] = ( R7:5); - P0.L = (IMEM_CONTROL & 0xFFFF); - P0.H = (IMEM_CONTROL >> 16); + P0.L = LO(IMEM_CONTROL); + P0.H = HI(IMEM_CONTROL); R7 = [P0]; /* Clear the IMC bit , All valid bits in the instruction @@ -197,8 +197,8 @@ ENTRY(_invalidate_entire_dcache) ENTRY(_dcache_invalidate) [--SP] = ( R7:6); - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); + P0.L = LO(DMEM_CONTROL); + P0.H = HI(DMEM_CONTROL); R7 = [P0]; /* Clear the DMC[1:0] bits, All valid bits in the data diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S index 5be6b975ae4..22fada0c1cb 100644 --- a/arch/blackfin/mach-common/cacheinit.S +++ b/arch/blackfin/mach-common/cacheinit.S @@ -38,13 +38,13 @@ .text -#ifdef ANOMALY_05000125 -#if defined(CONFIG_BLKFIN_CACHE) +#if ANOMALY_05000125 +#if defined(CONFIG_BFIN_ICACHE) ENTRY(_bfin_write_IMEM_CONTROL) /* Enable Instruction Cache */ - P0.l = (IMEM_CONTROL & 0xFFFF); - P0.h = (IMEM_CONTROL >> 16); + P0.l = LO(IMEM_CONTROL); + P0.h = HI(IMEM_CONTROL); /* Anomaly 05000125 */ CLI R1; @@ -58,10 +58,10 @@ ENTRY(_bfin_write_IMEM_CONTROL) ENDPROC(_bfin_write_IMEM_CONTROL) #endif -#if defined(CONFIG_BLKFIN_DCACHE) +#if defined(CONFIG_BFIN_DCACHE) ENTRY(_bfin_write_DMEM_CONTROL) - P0.l = (DMEM_CONTROL & 0xFFFF); - P0.h = (DMEM_CONTROL >> 16); + P0.l = LO(DMEM_CONTROL); + P0.h = HI(DMEM_CONTROL); CLI R1; SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ diff --git a/arch/blackfin/mach-common/cplbhdlr.S b/arch/blackfin/mach-common/cplbhdlr.S index 2f3c72c2399..2788532de72 100644 --- a/arch/blackfin/mach-common/cplbhdlr.S +++ b/arch/blackfin/mach-common/cplbhdlr.S @@ -69,14 +69,14 @@ ENTRY(__cplb_hdr) .Lis_icplb_miss: -#if defined(CONFIG_BLKFIN_CACHE) || defined(CONFIG_BLKFIN_DCACHE) -# if defined(CONFIG_BLKFIN_CACHE) && !defined(CONFIG_BLKFIN_DCACHE) +#if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE) +# if defined(CONFIG_BFIN_ICACHE) && !defined(CONFIG_BFIN_DCACHE) R1 = CPLB_ENABLE_ICACHE; # endif -# if !defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE) +# if !defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE) R1 = CPLB_ENABLE_DCACHE; # endif -# if defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE) +# if defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE) R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE; # endif #else diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S index e4b47e09cf1..946703ef48f 100644 --- a/arch/blackfin/mach-common/cplbmgr.S +++ b/arch/blackfin/mach-common/cplbmgr.S @@ -75,15 +75,15 @@ ENTRY(_cplb_mgr) * from the configuration table. */ - P4.L = (ICPLB_FAULT_ADDR & 0xFFFF); - P4.H = (ICPLB_FAULT_ADDR >> 16); + P4.L = LO(ICPLB_FAULT_ADDR); + P4.H = HI(ICPLB_FAULT_ADDR); P1 = 16; P5.L = _page_size_table; P5.H = _page_size_table; - P0.L = (ICPLB_DATA0 & 0xFFFF); - P0.H = (ICPLB_DATA0 >> 16); + P0.L = LO(ICPLB_DATA0); + P0.H = HI(ICPLB_DATA0); R4 = [P4]; /* Get faulting address*/ R6 = 64; /* Advance past the fault address, which*/ R6 = R6 + R4; /* we'll use if we find a match*/ @@ -117,13 +117,13 @@ ENTRY(_cplb_mgr) I0 = R4; /* Fault address we'll search for*/ /* set up pointers */ - P0.L = (ICPLB_DATA0 & 0xFFFF); - P0.H = (ICPLB_DATA0 >> 16); + P0.L = LO(ICPLB_DATA0); + P0.H = HI(ICPLB_DATA0); /* The replacement procedure for ICPLBs */ - P4.L = (IMEM_CONTROL & 0xFFFF); - P4.H = (IMEM_CONTROL >> 16); + P4.L = LO(IMEM_CONTROL); + P4.H = HI(IMEM_CONTROL); /* disable cplbs */ R5 = [P4]; /* Control Register*/ @@ -243,8 +243,8 @@ ENTRY(_cplb_mgr) * last entry of the table. */ - P1.L = (ICPLB_DATA15 & 0xFFFF); /* ICPLB_DATA15 */ - P1.H = (ICPLB_DATA15 >> 16); + P1.L = LO(ICPLB_DATA15); /* ICPLB_DATA15 */ + P1.H = HI(ICPLB_DATA15); [P1] = R2; [P1-0x100] = R4; #ifdef CONFIG_CPLB_INFO @@ -292,10 +292,10 @@ ENTRY(_cplb_mgr) * pending writes associated with the CPLB. */ - P4.L = (DCPLB_STATUS & 0xFFFF); - P4.H = (DCPLB_STATUS >> 16); - P3.L = (DCPLB_DATA0 & 0xFFFF); - P3.H = (DCPLB_DATA0 >> 16); + P4.L = LO(DCPLB_STATUS); + P4.H = HI(DCPLB_STATUS); + P3.L = LO(DCPLB_DATA0); + P3.H = HI(DCPLB_DATA0); R5 = [P4]; /* A protection violation can be caused by more than just writes @@ -355,11 +355,11 @@ ENTRY(_cplb_mgr) * config table, that covers the faulting address. */ - P1.L = (DCPLB_DATA15 & 0xFFFF); - P1.H = (DCPLB_DATA15 >> 16); + P1.L = LO(DCPLB_DATA15); + P1.H = HI(DCPLB_DATA15); - P4.L = (DCPLB_FAULT_ADDR & 0xFFFF); - P4.H = (DCPLB_FAULT_ADDR >> 16); + P4.L = LO(DCPLB_FAULT_ADDR); + P4.H = HI(DCPLB_FAULT_ADDR); R4 = [P4]; I0 = R4; @@ -368,8 +368,8 @@ ENTRY(_cplb_mgr) R6 = R1; /* Save for later*/ /* Turn off CPLBs while we work.*/ - P4.L = (DMEM_CONTROL & 0xFFFF); - P4.H = (DMEM_CONTROL >> 16); + P4.L = LO(DMEM_CONTROL); + P4.H = HI(DMEM_CONTROL); R5 = [P4]; BITCLR(R5,ENDCPLB_P); CLI R0; @@ -384,8 +384,8 @@ ENTRY(_cplb_mgr) * are no good. */ - I1.L = (DCPLB_DATA0 & 0xFFFF); - I1.H = (DCPLB_DATA0 >> 16); + I1.L = LO(DCPLB_DATA0); + I1.H = HI(DCPLB_DATA0); P1 = 2; P2 = 16; I2.L = _dcplb_preference; @@ -405,7 +405,7 @@ ENTRY(_cplb_mgr) P3.L = _page_size_table; /* retrieve end address */ P3.H = _page_size_table; /* retrieve end address */ R3 = 0x1002; /* 16th - position, 2 bits -length */ -#ifdef ANOMALY_05000209 +#if ANOMALY_05000209 nop; /* Anomaly 05000209 */ #endif R7 = EXTRACT(R1,R3.l); @@ -475,8 +475,8 @@ ENTRY(_cplb_mgr) * one space closer to the start. */ - R1.L = (DCPLB_DATA16 & 0xFFFF); /* DCPLB_DATA15 + 4 */ - R1.H = (DCPLB_DATA16 >> 16); + R1.L = LO(DCPLB_DATA16); /* DCPLB_DATA15 + 4 */ + R1.H = HI(DCPLB_DATA16); R0 = P0; /* If the victim happens to be in DCPLB15, @@ -549,8 +549,8 @@ ENTRY(_cplb_mgr) * if necessary. */ - P1.L = (DCPLB_DATA15 & 0xFFFF); - P1.H = (DCPLB_DATA15 >> 16); + P1.L = LO(DCPLB_DATA15); + P1.H = HI(DCPLB_DATA15); /* If the DCPLB has cache bits set, but caching hasn't * been enabled, then we want to mask off the cache-in-L1 @@ -565,7 +565,7 @@ ENTRY(_cplb_mgr) * cost of first-write exceptions to mark the page as dirty. */ -#ifdef CONFIG_BLKFIN_WT +#ifdef CONFIG_BFIN_WT BITSET(R6, 14); /* Set WT*/ #endif diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S index 97cdcd6a00d..39fbc286110 100644 --- a/arch/blackfin/mach-common/dpmc.S +++ b/arch/blackfin/mach-common/dpmc.S @@ -39,8 +39,8 @@ ENTRY(_unmask_wdog_wakeup_evt) P0.H = hi(SICA_IWR1); P0.L = lo(SICA_IWR1); #else - P0.h = (SIC_IWR >> 16); - P0.l = (SIC_IWR & 0xFFFF); + P0.h = HI(SIC_IWR); + P0.l = LO(SIC_IWR); #endif R7 = [P0]; #if defined(CONFIG_BF561) @@ -60,11 +60,11 @@ ENTRY(_unmask_wdog_wakeup_evt) */ R7 = 0x0000(z); #if defined(CONFIG_BF561) - P0.h = (WDOGA_STAT >> 16); - P0.l = (WDOGA_STAT & 0xFFFF); + P0.h = HI(WDOGA_STAT); + P0.l = LO(WDOGA_STAT); #else - P0.h = (WDOG_STAT >> 16); - P0.l = (WDOG_STAT & 0xFFFF); + P0.h = HI(WDOG_STAT); + P0.l = LO(WDOG_STAT); #endif [P0] = R7; SSYNC; @@ -73,21 +73,21 @@ ENTRY(_unmask_wdog_wakeup_evt) ENTRY(_program_wdog_timer) [--SP] = ( R7:0, P5:0 ); #if defined(CONFIG_BF561) - P0.h = (WDOGA_CNT >> 16); - P0.l = (WDOGA_CNT & 0xFFFF); + P0.h = HI(WDOGA_CNT); + P0.l = LO(WDOGA_CNT); #else - P0.h = (WDOG_CNT >> 16); - P0.l = (WDOG_CNT & 0xFFFF); + P0.h = HI(WDOG_CNT); + P0.l = LO(WDOG_CNT); #endif [P0] = R0; SSYNC; #if defined(CONFIG_BF561) - P0.h = (WDOGA_CTL >> 16); - P0.l = (WDOGA_CTL & 0xFFFF); + P0.h = HI(WDOGA_CTL); + P0.l = LO(WDOGA_CTL); #else - P0.h = (WDOG_CTL >> 16); - P0.l = (WDOG_CTL & 0xFFFF); + P0.h = HI(WDOG_CTL); + P0.l = LO(WDOG_CTL); #endif R7 = W[P0](Z); CC = BITTST(R7,1); @@ -97,11 +97,11 @@ ENTRY(_program_wdog_timer) .LSKIP_WRITE_TO_STAT: #if defined(CONFIG_BF561) - P0.h = (WDOGA_CTL >> 16); - P0.l = (WDOGA_CTL & 0xFFFF); + P0.h = HI(WDOGA_CTL); + P0.l = LO(WDOGA_CTL); #else - P0.h = (WDOG_CTL >> 16); - P0.l = (WDOG_CTL & 0xFFFF); + P0.h = HI(WDOG_CTL); + P0.l = LO(WDOG_CTL); #endif R7 = W[P0](Z); BITCLR(R7,1); /* Enable GP event */ @@ -122,11 +122,11 @@ ENTRY(_clear_wdog_wakeup_evt) [--SP] = ( R7:0, P5:0 ); #if defined(CONFIG_BF561) - P0.h = (WDOGA_CTL >> 16); - P0.l = (WDOGA_CTL & 0xFFFF); + P0.h = HI(WDOGA_CTL); + P0.l = LO(WDOGA_CTL); #else - P0.h = (WDOG_CTL >> 16); - P0.l = (WDOG_CTL & 0xFFFF); + P0.h = HI(WDOG_CTL); + P0.l = LO(WDOG_CTL); #endif R7 = 0x0AD6(Z); W[P0] = R7.L; @@ -149,11 +149,11 @@ ENTRY(_clear_wdog_wakeup_evt) ENTRY(_disable_wdog_timer) [--SP] = ( R7:0, P5:0 ); #if defined(CONFIG_BF561) - P0.h = (WDOGA_CTL >> 16); - P0.l = (WDOGA_CTL & 0xFFFF); + P0.h = HI(WDOGA_CTL); + P0.l = LO(WDOGA_CTL); #else - P0.h = (WDOG_CTL >> 16); - P0.l = (WDOG_CTL & 0xFFFF); + P0.h = HI(WDOG_CTL); + P0.l = LO(WDOG_CTL); #endif R7 = 0xAD6(Z); W[P0] = R7.L; @@ -300,7 +300,7 @@ ENTRY(_sleep_deeper) P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); R5 = W[P0](z); - R0.L = (MIN_VC/CONFIG_CLKIN_HZ) << 9; + R0.L = (CONFIG_MIN_VCO_HZ/CONFIG_CLKIN_HZ) << 9; W[P0] = R0.l; SSYNC; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 96045880834..e3ad5802868 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -29,21 +29,7 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* - * 25-Dec-2004 - LG Soft India - * 1. Fix in return_from_int, to make sure any pending - * system call in ILAT for this process to get - * executed, otherwise in case context switch happens, - * system call of first process (i.e in ILAT) will be - * carried forward to the switched process. - * 2. Removed Constant references for the following - * a. IPEND - * b. EXCAUSE mask - * c. PAGE Mask - */ - -/* - * NOTE: This code handles signal-recognition, which happens every time +/* NOTE: This code handles signal-recognition, which happens every time * after a timer-interrupt and after each system call. */ @@ -58,6 +44,23 @@ #include <asm/mach-common/context.S> +#if defined(CONFIG_BFIN_SCRATCH_REG_RETN) +# define EX_SCRATCH_REG RETN +#elif defined(CONFIG_BFIN_SCRATCH_REG_RETE) +# define EX_SCRATCH_REG RETE +#else +# define EX_SCRATCH_REG CYCLES +#endif + +#if ANOMALY_05000281 +ENTRY(_safe_speculative_execution) + NOP; + NOP; + NOP; + jump _safe_speculative_execution; +ENDPROC(_safe_speculative_execution) +#endif + #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 .section .l1.text #else @@ -69,7 +72,7 @@ * patch up CPLB misses on the kernel stack. */ ENTRY(_ex_dcplb) -#if defined(ANOMALY_05000261) +#if ANOMALY_05000261 /* * Work around an anomaly: if we see a new DCPLB fault, return * without doing anything. Then, if we get the same fault again, @@ -93,7 +96,7 @@ ENTRY(_ex_icplb) call __cplb_hdr; DEBUG_START_HWTRACE(p5, r7) RESTORE_ALL_SYS - SP = RETN; + SP = EX_SCRATCH_REG; rtx; ENDPROC(_ex_icplb) @@ -102,7 +105,7 @@ ENTRY(_ex_syscall) (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; raise 15; /* invoked by TRAP #0, for sys call */ - sp = retn; + sp = EX_SCRATCH_REG; rtx ENDPROC(_ex_syscall) @@ -135,9 +138,9 @@ ENTRY(_ex_single_step) cc = r6 == r7; if !cc jump _ex_trap_c; -_return_from_exception: +ENTRY(_return_from_exception) DEBUG_START_HWTRACE(p5, r7) -#ifdef ANOMALY_05000257 +#if ANOMALY_05000257 R7=LC0; LC0=R7; R7=LC1; @@ -145,7 +148,7 @@ _return_from_exception: #endif (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; - sp = retn; + sp = EX_SCRATCH_REG; rtx; ENDPROC(_ex_soft_bp) @@ -163,7 +166,17 @@ ENTRY(_handle_bad_cplb) [--sp] = ASTAT; [--sp] = (R7:6, P5:4); +ENTRY(_ex_replaceable) + nop; + ENTRY(_ex_trap_c) + /* Make sure we are not in a double fault */ + p4.l = lo(IPEND); + p4.h = hi(IPEND); + r7 = [p4]; + CC = BITTST (r7, 5); + if CC jump _double_fault; + /* Call C code (trap_c) to handle the exception, which most * likely involves sending a signal to the current process. * To avoid double faults, lower our priority to IRQ5 first. @@ -204,11 +217,57 @@ ENTRY(_ex_trap_c) DEBUG_START_HWTRACE(p5, r7) (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; - SP = RETN; + SP = EX_SCRATCH_REG; raise 5; rtx; ENDPROC(_ex_trap_c) +/* We just realized we got an exception, while we were processing a different + * exception. This is a unrecoverable event, so crash + */ +ENTRY(_double_fault) + /* Turn caches & protection off, to ensure we don't get any more + * double exceptions + */ + + P4.L = LO(IMEM_CONTROL); + P4.H = HI(IMEM_CONTROL); + + R5 = [P4]; /* Control Register*/ + BITCLR(R5,ENICPLB_P); + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + + P4.L = LO(DMEM_CONTROL); + P4.H = HI(DMEM_CONTROL); + R5 = [P4]; + BITCLR(R5,ENDCPLB_P); + SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + + /* Fix up the stack */ + (R7:6,P5:4) = [sp++]; + ASTAT = [sp++]; + SP = EX_SCRATCH_REG; + + /* We should be out of the exception stack, and back down into + * kernel or user space stack + */ + SAVE_ALL_SYS + + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + SP += -12; + call _double_fault_c; + SP += 12; +.L_double_fault_panic: + JUMP .L_double_fault_panic + +ENDPROC(_double_fault) + ENTRY(_exception_to_level5) SAVE_ALL_SYS @@ -279,7 +338,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ * covered by a CPLB. Switch to an exception stack; use RETN as a * scratch register (for want of a better option). */ - retn = sp; + EX_SCRATCH_REG = sp; sp.l = _exception_stack_top; sp.h = _exception_stack_top; /* Try to deal with syscalls quickly. */ @@ -290,8 +349,8 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ r6.l = lo(SEQSTAT_EXCAUSE); r6.h = hi(SEQSTAT_EXCAUSE); r7 = r7 & r6; - p5.h = _extable; - p5.l = _extable; + p5.h = _ex_table; + p5.l = _ex_table; p4 = r7; p5 = p5 + (p4 << 2); p4 = [p5]; @@ -634,9 +693,9 @@ ENTRY(_return_from_int) p1.h = _schedule_and_signal_from_int; [p0] = p1; csync; -#if defined(ANOMALY_05000281) - r0.l = lo(CONFIG_BOOT_LOAD); - r0.h = hi(CONFIG_BOOT_LOAD); +#if ANOMALY_05000281 + r0.l = _safe_speculative_execution; + r0.h = _safe_speculative_execution; reti = r0; #endif r0 = 0x801f (z); @@ -648,9 +707,9 @@ ENTRY(_return_from_int) ENDPROC(_return_from_int) ENTRY(_lower_to_irq14) -#if defined(ANOMALY_05000281) - r0.l = lo(CONFIG_BOOT_LOAD); - r0.h = hi(CONFIG_BOOT_LOAD); +#if ANOMALY_05000281 + r0.l = _safe_speculative_execution; + r0.h = _safe_speculative_execution; reti = r0; #endif r0 = 0x401f; @@ -731,6 +790,114 @@ ENTRY(_init_exception_buff) rts; ENDPROC(_init_exception_buff) +/* We handle this 100% in exception space - to reduce overhead + * Only potiential problem is if the software buffer gets swapped out of the + * CPLB table - then double fault. - so we don't let this happen in other places + */ +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND +ENTRY(_ex_trace_buff_full) + [--sp] = P3; + [--sp] = P2; + [--sp] = LC0; + [--sp] = LT0; + [--sp] = LB0; + P5.L = _trace_buff_offset; + P5.H = _trace_buff_offset; + P3 = [P5]; /* trace_buff_offset */ + P5.L = lo(TBUFSTAT); + P5.H = hi(TBUFSTAT); + R7 = [P5]; + R7 <<= 1; /* double, since we need to read twice */ + LC0 = R7; + R7 <<= 2; /* need to shift over again, + * to get the number of bytes */ + P5.L = lo(TBUF); + P5.H = hi(TBUF); + R6 = ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*1024) - 1; + + P2 = R7; + P3 = P3 + P2; + R7 = P3; + R7 = R7 & R6; + P3 = R7; + P2.L = _trace_buff_offset; + P2.H = _trace_buff_offset; + [P2] = P3; + + P2.L = _software_trace_buff; + P2.H = _software_trace_buff; + + LSETUP (.Lstart, .Lend) LC0; +.Lstart: + R7 = [P5]; /* read TBUF */ + P4 = P3 + P2; + [P4] = R7; + P3 += -4; + R7 = P3; + R7 = R7 & R6; +.Lend: + P3 = R7; + + LB0 = [sp++]; + LT0 = [sp++]; + LC0 = [sp++]; + P2 = [sp++]; + P3 = [sp++]; + jump _return_from_exception; +ENDPROC(_ex_trace_buff_full) + +#if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4 +.data +#else +.section .l1.data.B +#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN */ +ENTRY(_trace_buff_offset) + .long 0; +ALIGN +ENTRY(_software_trace_buff) + .rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256); + .long 0 + .endr +#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */ + +#if CONFIG_EARLY_PRINTK +.section .init.text +ENTRY(_early_trap) + SAVE_ALL_SYS + trace_buffer_stop(p0,r0); + + /* Turn caches off, to ensure we don't get double exceptions */ + + P4.L = LO(IMEM_CONTROL); + P4.H = HI(IMEM_CONTROL); + + R5 = [P4]; /* Control Register*/ + BITCLR(R5,ENICPLB_P); + CLI R1; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + + P4.L = LO(DMEM_CONTROL); + P4.H = HI(DMEM_CONTROL); + R5 = [P4]; + BITCLR(R5,ENDCPLB_P); + SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R1; + + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + r1 = RETX; + + SP += -12; + call _early_trap_c; + SP += 12; +ENDPROC(_early_trap) +#endif /* CONFIG_EARLY_PRINTK */ + /* * Put these in the kernel data section - that should always be covered by * a CPLB. This is needed to ensure we don't get double fault conditions @@ -741,30 +908,33 @@ ENDPROC(_init_exception_buff) #else .data #endif -ALIGN -_extable: +ENTRY(_ex_table) /* entry for each EXCAUSE[5:0] * This table must be in sync with the table in ./kernel/traps.c * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined */ - .long _ex_syscall; /* 0x00 - User Defined - Linux Syscall */ + .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */ .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */ - .long _ex_trap_c /* 0x02 - User Defined */ + .long _ex_replaceable /* 0x02 - User Defined */ .long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */ - .long _ex_trap_c /* 0x04 - User Defined */ - .long _ex_trap_c /* 0x05 - User Defined */ - .long _ex_trap_c /* 0x06 - User Defined */ - .long _ex_trap_c /* 0x07 - User Defined */ - .long _ex_trap_c /* 0x08 - User Defined */ - .long _ex_trap_c /* 0x09 - User Defined */ - .long _ex_trap_c /* 0x0A - User Defined */ - .long _ex_trap_c /* 0x0B - User Defined */ - .long _ex_trap_c /* 0x0C - User Defined */ - .long _ex_trap_c /* 0x0D - User Defined */ - .long _ex_trap_c /* 0x0E - User Defined */ - .long _ex_trap_c /* 0x0F - User Defined */ + .long _ex_replaceable /* 0x04 - User Defined */ + .long _ex_replaceable /* 0x05 - User Defined */ + .long _ex_replaceable /* 0x06 - User Defined */ + .long _ex_replaceable /* 0x07 - User Defined */ + .long _ex_replaceable /* 0x08 - User Defined */ + .long _ex_replaceable /* 0x09 - User Defined */ + .long _ex_replaceable /* 0x0A - User Defined */ + .long _ex_replaceable /* 0x0B - User Defined */ + .long _ex_replaceable /* 0x0C - User Defined */ + .long _ex_replaceable /* 0x0D - User Defined */ + .long _ex_replaceable /* 0x0E - User Defined */ + .long _ex_replaceable /* 0x0F - User Defined */ .long _ex_single_step /* 0x10 - HW Single step */ +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + .long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */ +#else .long _ex_trap_c /* 0x11 - Trace Buffer Full */ +#endif .long _ex_trap_c /* 0x12 - Reserved */ .long _ex_trap_c /* 0x13 - Reserved */ .long _ex_trap_c /* 0x14 - Reserved */ @@ -812,8 +982,8 @@ _extable: .long _ex_trap_c /* 0x3D - Reserved */ .long _ex_trap_c /* 0x3E - Reserved */ .long _ex_trap_c /* 0x3F - Reserved */ +END(_ex_table) -ALIGN ENTRY(_sys_call_table) .long _sys_restart_syscall /* 0 */ .long _sys_exit @@ -1184,7 +1354,7 @@ _exception_stack: .endr _exception_stack_top: -#if defined(ANOMALY_05000261) +#if ANOMALY_05000261 /* Used by the assembly entry point to work around an anomaly. */ _last_cplb_fault_retx: .long 0; diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 203e2070916..c6b32fe0f6e 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -46,30 +46,6 @@ .align 4 /* just in case */ -/* - * initial interrupt handlers - */ - -#ifndef CONFIG_KGDB - /* interrupt routine for emulation - 0 */ - /* Currently used only if GDB stub is not in - invalid */ - /* gdb-stub set the evt itself */ - /* save registers for post-mortem only */ -ENTRY(_evt_emulation) - SAVE_ALL_SYS -#ifdef CONFIG_FRAME_POINTER - fp = 0; -#endif - r0 = IRQ_EMU; - r1 = sp; - SP += -12; - call _irq_panic; - SP += 12; - /* - GDB stub fills this in by itself (if defined) */ - rte; -ENDPROC(_evt_emulation) -#endif - /* Common interrupt entry code. First we do CLI, then push * RETI, to keep interrupts disabled, but to allow this state to be changed * by local_bh_enable. @@ -140,7 +116,7 @@ __common_int_entry: fp = 0; #endif -#if defined (ANOMALY_05000283) || defined (ANOMALY_05000315) +#if ANOMALY_05000283 || ANOMALY_05000315 cc = r7 == r7; p5.h = 0xffc0; p5.l = 0x0014; @@ -163,7 +139,7 @@ ENTRY(_evt_ivhw) #ifdef CONFIG_FRAME_POINTER fp = 0; #endif -#ifdef ANOMALY_05000283 +#if ANOMALY_05000283 cc = r7 == r7; p5.h = 0xffc0; p5.l = 0x0014; @@ -201,27 +177,15 @@ ENTRY(_evt_ivhw) jump .Lcommon_restore_context; #endif -/* interrupt routine for evt2 - 2. This is NMI. */ -ENTRY(_evt_evt2) - SAVE_CONTEXT -#ifdef CONFIG_FRAME_POINTER - fp = 0; -#endif -#ifdef ANOMALY_05000283 - cc = r7 == r7; - p5.h = 0xffc0; - p5.l = 0x0014; - if cc jump 1f; - r7.l = W[p5]; -1: -#endif - r0 = IRQ_NMI; - r1 = sp; - SP += -12; - call _asm_do_IRQ; - SP += 12; - RESTORE_CONTEXT +/* Interrupt routine for evt2 (NMI). + * We don't actually use this, so just return. + * For inner circle type details, please see: + * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi + */ +ENTRY(_evt_nmi) +.weak _evt_nmi rtn; +ENDPROC(_evt_nmi) /* interrupt routine for core timer - 6 */ ENTRY(_evt_timer) diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c index 660f881b620..2db3546fc87 100644 --- a/arch/blackfin/mach-common/ints-priority-dc.c +++ b/arch/blackfin/mach-common/ints-priority-dc.c @@ -221,7 +221,7 @@ static unsigned int bf561_gpio_irq_startup(unsigned int irq) if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, NULL); + ret = gpio_request(gpionr, "IRQ"); if (ret) return ret; @@ -261,7 +261,7 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type) if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, NULL); + ret = gpio_request(gpionr, "IRQ"); if (ret) return ret; @@ -362,10 +362,11 @@ void __init init_exception_vectors(void) { SSYNC(); -#ifndef CONFIG_KGDB - bfin_write_EVT0(evt_emulation); -#endif - bfin_write_EVT2(evt_evt2); + /* cannot program in software: + * evt0 - emulation (jtag) + * evt1 - reset + */ + bfin_write_EVT2(evt_nmi); bfin_write_EVT3(trap); bfin_write_EVT5(evt_ivhw); bfin_write_EVT6(evt_timer); diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c index 4708023fe71..d3b7672b2b9 100644 --- a/arch/blackfin/mach-common/ints-priority-sc.c +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -343,7 +343,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) u16 gpionr = irq - IRQ_PF0; if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, NULL); + ret = gpio_request(gpionr, "IRQ"); if (ret) return ret; } @@ -377,7 +377,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, NULL); + ret = gpio_request(gpionr, "IRQ"); if (ret) return ret; } @@ -587,7 +587,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) } if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, NULL); + ret = gpio_request(gpionr, "IRQ"); if (ret) return ret; } @@ -627,7 +627,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, NULL); + ret = gpio_request(gpionr, "IRQ"); if (ret) return ret; } @@ -721,10 +721,11 @@ void __init init_exception_vectors(void) { SSYNC(); -#ifndef CONFIG_KGDB - bfin_write_EVT0(evt_emulation); -#endif - bfin_write_EVT2(evt_evt2); + /* cannot program in software: + * evt0 - emulation (jtag) + * evt1 - reset + */ + bfin_write_EVT2(evt_nmi); bfin_write_EVT3(trap); bfin_write_EVT5(evt_ivhw); bfin_write_EVT6(evt_timer); diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S index 386ac8dda07..28b87fe9ce3 100644 --- a/arch/blackfin/mach-common/lock.S +++ b/arch/blackfin/mach-common/lock.S @@ -33,7 +33,7 @@ .text -#ifdef CONFIG_BLKFIN_CACHE_LOCK +#ifdef CONFIG_BFIN_ICACHE_LOCK /* When you come here, it is assumed that * R0 - Which way to be locked @@ -43,12 +43,12 @@ ENTRY(_cache_grab_lock) [--SP]=( R7:0,P5:0 ); - P1.H = (IMEM_CONTROL >> 16); - P1.L = (IMEM_CONTROL & 0xFFFF); - P5.H = (ICPLB_ADDR0 >> 16); - P5.L = (ICPLB_ADDR0 & 0xFFFF); - P4.H = (ICPLB_DATA0 >> 16); - P4.L = (ICPLB_DATA0 & 0xFFFF); + P1.H = HI(IMEM_CONTROL); + P1.L = LO(IMEM_CONTROL); + P5.H = HI(ICPLB_ADDR0); + P5.L = LO(ICPLB_ADDR0); + P4.H = HI(ICPLB_DATA0); + P4.L = LO(ICPLB_DATA0); R7 = R0; /* If the code of interest already resides in the cache @@ -167,8 +167,8 @@ ENTRY(_cache_lock) [--SP]=( R7:0,P5:0 ); - P1.H = (IMEM_CONTROL >> 16); - P1.L = (IMEM_CONTROL & 0xFFFF); + P1.H = HI(IMEM_CONTROL); + P1.L = LO(IMEM_CONTROL); /* Disable the Interrupts*/ CLI R3; @@ -189,14 +189,14 @@ ENTRY(_cache_lock) RTS; ENDPROC(_cache_lock) -#endif /* BLKFIN_CACHE_LOCK */ +#endif /* BFIN_ICACHE_LOCK */ /* Return the ILOC bits of IMEM_CONTROL */ ENTRY(_read_iloc) - P1.H = (IMEM_CONTROL >> 16); - P1.L = (IMEM_CONTROL & 0xFFFF); + P1.H = HI(IMEM_CONTROL); + P1.L = LO(IMEM_CONTROL); R1 = 0xF; R0 = [P1]; R0 = R0 >> 3; diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 68459cc052a..e97ea8fc8dc 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -53,7 +53,7 @@ static unsigned long empty_bad_page; unsigned long empty_zero_page; -void __init show_mem(void) +void show_mem(void) { unsigned long i; int free = 0, total = 0, reserved = 0, shared = 0; diff --git a/arch/blackfin/oprofile/op_blackfin.h b/arch/blackfin/oprofile/op_blackfin.h index f88f446c814..05dd08c9d15 100644 --- a/arch/blackfin/oprofile/op_blackfin.h +++ b/arch/blackfin/oprofile/op_blackfin.h @@ -68,7 +68,7 @@ static inline unsigned int ctr_read(void) unsigned int tmp; tmp = bfin_read_PFCTL(); - __builtin_bfin_csync(); + CSYNC(); return tmp; } @@ -76,21 +76,21 @@ static inline unsigned int ctr_read(void) static inline void ctr_write(unsigned int val) { bfin_write_PFCTL(val); - __builtin_bfin_csync(); + CSYNC(); } static inline void count_read(unsigned int *count) { count[0] = bfin_read_PFCNTR0(); count[1] = bfin_read_PFCNTR1(); - __builtin_bfin_csync(); + CSYNC(); } static inline void count_write(unsigned int *count) { bfin_write_PFCNTR0(count[0]); bfin_write_PFCNTR1(count[1]); - __builtin_bfin_csync(); + CSYNC(); } extern int pm_overflow_handler(int irq, struct pt_regs *regs); diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 66c92bc36f3..6f475b60986 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -86,10 +86,8 @@ static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifdef CONFIG_BF54x while (!(UART_GET_LSR(uart) & TEMT)) continue; -#endif #ifdef CONFIG_SERIAL_BFIN_DMA disable_dma(uart->tx_dma_channel); @@ -128,8 +126,8 @@ static void bfin_serial_start_tx(struct uart_port *port) ier = UART_GET_IER(uart); ier |= ETBEI; UART_PUT_IER(uart, ier); - bfin_serial_tx_chars(uart); #endif + bfin_serial_tx_chars(uart); #endif } @@ -139,18 +137,21 @@ static void bfin_serial_start_tx(struct uart_port *port) static void bfin_serial_stop_rx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; +#ifdef CONFIG_KGDB_UART + if (uart->port.line != CONFIG_KGDB_UART_PORT) { +#endif #ifdef CONFIG_BF54x UART_CLEAR_IER(uart, ERBFI); #else unsigned short ier; ier = UART_GET_IER(uart); -#ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) -#endif ier &= ~ERBFI; UART_PUT_IER(uart, ier); #endif +#ifdef CONFIG_KGDB_UART + } +#endif } /* @@ -173,12 +174,15 @@ void kgdb_put_debug_char(int chr) uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; while (!(UART_GET_LSR(uart) & THRE)) { - __builtin_bfin_ssync(); + SSYNC(); } + +#ifndef CONFIG_BF54x UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB)); - __builtin_bfin_ssync(); + SSYNC(); +#endif UART_PUT_CHAR(uart, (unsigned char)chr); - __builtin_bfin_ssync(); + SSYNC(); } int kgdb_get_debug_char(void) @@ -192,12 +196,14 @@ int kgdb_get_debug_char(void) uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; while(!(UART_GET_LSR(uart) & DR)) { - __builtin_bfin_ssync(); + SSYNC(); } +#ifndef CONFIG_BF54x UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB)); - __builtin_bfin_ssync(); + SSYNC(); +#endif chr = UART_GET_CHAR(uart); - __builtin_bfin_ssync(); + SSYNC(); return chr; } @@ -225,12 +231,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { struct tty_struct *tty = uart->port.info->tty; unsigned int status, ch, flg; + static int in_break = 0; #ifdef CONFIG_KGDB_UART struct pt_regs *regs = get_irq_regs(); #endif -#ifdef BF533_FAMILY - static int in_break = 0; -#endif status = UART_GET_LSR(uart); ch = UART_GET_CHAR(uart); @@ -256,29 +260,30 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) } } #endif - -#ifdef BF533_FAMILY - /* The BF533 family of processors have a nice misbehavior where - * they continuously generate characters for a "single" break. - * We have to basically ignore this flood until the "next" valid - * character comes across. All other Blackfin families operate - * properly though. - */ - if (in_break) { - if (ch != 0) { - in_break = 0; - ch = UART_GET_CHAR(uart); - if (bfin_revid() < 5) + + if (ANOMALY_05000230) { + /* The BF533 family of processors have a nice misbehavior where + * they continuously generate characters for a "single" break. + * We have to basically ignore this flood until the "next" valid + * character comes across. All other Blackfin families operate + * properly though. + * Note: While Anomaly 05000230 does not directly address this, + * the changes that went in for it also fixed this issue. + */ + if (in_break) { + if (ch != 0) { + in_break = 0; + ch = UART_GET_CHAR(uart); + if (bfin_revid() < 5) + return; + } else return; - } else - return; + } } -#endif if (status & BI) { -#ifdef BF533_FAMILY - in_break = 1; -#endif + if (ANOMALY_05000230) + in_break = 1; uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto ignore_char; @@ -697,17 +702,19 @@ static int bfin_serial_startup(struct uart_port *port) uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; add_timer(&(uart->rx_dma_timer)); #else + if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, + "BFIN_UART_RX", uart)) { # ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT && request_irq -# else - if (request_irq + if (uart->port.line != CONFIG_KGDB_UART_PORT) { # endif - (uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, - "BFIN_UART_RX", uart)) { printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); return -EBUSY; +# ifdef CONFIG_KGDB_UART + } +# endif } + if (request_irq (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED, "BFIN_UART_TX", uart)) { @@ -962,30 +969,6 @@ static void __init bfin_serial_init_ports(void) } #ifdef CONFIG_SERIAL_BFIN_CONSOLE -static void bfin_serial_console_putchar(struct uart_port *port, int ch) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - while (!(UART_GET_LSR(uart) & THRE)) - barrier(); - UART_PUT_CHAR(uart, ch); - SSYNC(); -} - -/* - * Interrupts are disabled on entering - */ -static void -bfin_serial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct bfin_serial_port *uart = &bfin_serial_ports[co->index]; - int flags = 0; - - spin_lock_irqsave(&uart->port.lock, flags); - uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); - spin_unlock_irqrestore(&uart->port.lock, flags); - -} - /* * If the port was already initialised (eg, by a boot loader), * try to determine the current setup. @@ -1038,19 +1021,25 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, } pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits); } +#endif + +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +static struct uart_driver bfin_serial_reg; static int __init bfin_serial_console_setup(struct console *co, char *options) { struct bfin_serial_port *uart; +# ifdef CONFIG_SERIAL_BFIN_CONSOLE int baud = 57600; int bits = 8; int parity = 'n'; -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +# ifdef CONFIG_SERIAL_BFIN_CTSRTS int flow = 'r'; -#else +# else int flow = 'n'; -#endif +# endif +# endif /* * Check whether an invalid uart number has been specified, and @@ -1061,15 +1050,45 @@ bfin_serial_console_setup(struct console *co, char *options) co->index = 0; uart = &bfin_serial_ports[co->index]; +# ifdef CONFIG_SERIAL_BFIN_CONSOLE if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else bfin_serial_console_get_options(uart, &baud, &parity, &bits); return uart_set_options(&uart->port, co, baud, parity, bits, flow); +# else + return 0; +# endif +} +#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || + defined (CONFIG_EARLY_PRINTK) */ + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE +static void bfin_serial_console_putchar(struct uart_port *port, int ch) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + while (!(UART_GET_LSR(uart) & THRE)) + barrier(); + UART_PUT_CHAR(uart, ch); + SSYNC(); +} + +/* + * Interrupts are disabled on entering + */ +static void +bfin_serial_console_write(struct console *co, const char *s, unsigned int count) +{ + struct bfin_serial_port *uart = &bfin_serial_ports[co->index]; + int flags = 0; + + spin_lock_irqsave(&uart->port.lock, flags); + uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); + spin_unlock_irqrestore(&uart->port.lock, flags); + } -static struct uart_driver bfin_serial_reg; static struct console bfin_serial_console = { .name = BFIN_SERIAL_NAME, .write = bfin_serial_console_write, @@ -1095,7 +1114,64 @@ console_initcall(bfin_serial_rs_console_init); #define BFIN_SERIAL_CONSOLE &bfin_serial_console #else #define BFIN_SERIAL_CONSOLE NULL -#endif +#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ + + +#ifdef CONFIG_EARLY_PRINTK +static __init void early_serial_putc(struct uart_port *port, int ch) +{ + unsigned timeout = 0xffff; + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + while ((!(UART_GET_LSR(uart) & THRE)) && --timeout) + cpu_relax(); + UART_PUT_CHAR(uart, ch); +} + +static __init void early_serial_write(struct console *con, const char *s, + unsigned int n) +{ + struct bfin_serial_port *uart = &bfin_serial_ports[con->index]; + unsigned int i; + + for (i = 0; i < n; i++, s++) { + if (*s == '\n') + early_serial_putc(&uart->port, '\r'); + early_serial_putc(&uart->port, *s); + } +} + +static struct __init console bfin_early_serial_console = { + .name = "early_BFuart", + .write = early_serial_write, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .setup = bfin_serial_console_setup, + .index = -1, + .data = &bfin_serial_reg, +}; + +struct console __init *bfin_earlyserial_init(unsigned int port, + unsigned int cflag) +{ + struct bfin_serial_port *uart; + struct ktermios t; + + if (port == -1 || port >= nr_ports) + port = 0; + bfin_serial_init_ports(); + bfin_early_serial_console.index = port; + uart = &bfin_serial_ports[port]; + t.c_cflag = cflag; + t.c_iflag = 0; + t.c_oflag = 0; + t.c_lflag = ICANON; + t.c_line = port; + bfin_serial_set_termios(&uart->port, &t, &t); + return &bfin_early_serial_console; +} + +#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ static struct uart_driver bfin_serial_reg = { .owner = THIS_MODULE, @@ -1182,7 +1258,7 @@ static int __init bfin_serial_init(void) int ret; #ifdef CONFIG_KGDB_UART struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; - struct termios t; + struct ktermios t; #endif pr_info("Serial: Blackfin serial driver\n"); @@ -1199,11 +1275,15 @@ static int __init bfin_serial_init(void) } #ifdef CONFIG_KGDB_UART if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) { - request_irq(uart->port.irq, bfin_serial_int, + request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, "BFIN_UART_RX", uart); pr_info("Request irq for kgdb uart port\n"); +#ifdef CONFIG_BF54x + UART_SET_IER(uart, ERBFI); +#else UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI); - __builtin_bfin_ssync(); +#endif + SSYNC(); t.c_cflag = CS8|B57600; t.c_iflag = 0; t.c_oflag = 0; diff --git a/include/asm-blackfin/bfin5xx_spi.h b/include/asm-blackfin/bfin5xx_spi.h index 95c1c952e7c..f617d876545 100644 --- a/include/asm-blackfin/bfin5xx_spi.h +++ b/include/asm-blackfin/bfin5xx_spi.h @@ -21,8 +21,6 @@ #ifndef _SPI_CHANNEL_H_ #define _SPI_CHANNEL_H_ -#define SPI0_REGBASE 0xffc00500 - #define SPI_READ 0 #define SPI_WRITE 1 diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h index 25b934b7f82..984b74f0a2e 100644 --- a/include/asm-blackfin/blackfin.h +++ b/include/asm-blackfin/blackfin.h @@ -11,78 +11,57 @@ #define HI(con32) (((con32) >> 16) & 0xFFFF) #define hi(con32) (((con32) >> 16) & 0xFFFF) -#include <asm/mach/blackfin.h> -#include <asm/bfin-global.h> +#include <asm/mach/anomaly.h> #ifndef __ASSEMBLY__ /* SSYNC implementation for C file */ -#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244) -static inline void SSYNC (void) -{ - int _tmp; - __asm__ __volatile__ ("cli %0;\n\t" - "nop;nop;\n\t" - "ssync;\n\t" - "sti %0;\n\t" - :"=d"(_tmp):); -} -#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) -static inline void SSYNC (void) +static inline void SSYNC(void) { int _tmp; - __asm__ __volatile__ ("cli %0;\n\t" - "ssync;\n\t" - "sti %0;\n\t" - :"=d"(_tmp):); + if (ANOMALY_05000312) + __asm__ __volatile__( + "cli %0;" + "nop;" + "nop;" + "ssync;" + "sti %0;" + : "=d" (_tmp) + ); + else if (ANOMALY_05000244) + __asm__ __volatile__( + "nop;" + "nop;" + "nop;" + "ssync;" + ); + else + __asm__ __volatile__("ssync;"); } -#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244) -static inline void SSYNC (void) -{ - __asm__ __volatile__ ("nop; nop; nop;\n\t" - "ssync;\n\t" - ::); -} -#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) -static inline void SSYNC (void) -{ - __asm__ __volatile__ ("ssync;\n\t"); -} -#endif /* CSYNC implementation for C file */ -#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244) -static inline void CSYNC (void) -{ - int _tmp; - __asm__ __volatile__ ("cli %0;\n\t" - "nop;nop;\n\t" - "csync;\n\t" - "sti %0;\n\t" - :"=d"(_tmp):); -} -#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) -static inline void CSYNC (void) +static inline void CSYNC(void) { int _tmp; - __asm__ __volatile__ ("cli %0;\n\t" - "csync;\n\t" - "sti %0;\n\t" - :"=d"(_tmp):); -} -#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244) -static inline void CSYNC (void) -{ - __asm__ __volatile__ ("nop; nop; nop;\n\t" - "ssync;\n\t" - ::); + if (ANOMALY_05000312) + __asm__ __volatile__( + "cli %0;" + "nop;" + "nop;" + "csync;" + "sti %0;" + : "=d" (_tmp) + ); + else if (ANOMALY_05000244) + __asm__ __volatile__( + "nop;" + "nop;" + "nop;" + "csync;" + ); + else + __asm__ __volatile__("csync;"); } -#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) -static inline void CSYNC (void) -{ - __asm__ __volatile__ ("csync;\n\t"); -} -#endif #else /* __ASSEMBLY__ */ @@ -91,19 +70,15 @@ static inline void CSYNC (void) #define ssync(x) SSYNC(x) #define csync(x) CSYNC(x) -#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244) +#if ANOMALY_05000312 #define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch; #define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch; -#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) -#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch; -#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch; - -#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244) +#elif ANOMALY_05000244 #define SSYNC(scratch) nop; nop; nop; SSYNC; #define CSYNC(scratch) nop; nop; nop; CSYNC; -#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) +#else #define SSYNC(scratch) SSYNC; #define CSYNC(scratch) CSYNC; @@ -111,4 +86,7 @@ static inline void CSYNC (void) #endif /* __ASSEMBLY__ */ +#include <asm/mach/blackfin.h> +#include <asm/bfin-global.h> + #endif /* _BLACKFIN_H_ */ diff --git a/include/asm-blackfin/cacheflush.h b/include/asm-blackfin/cacheflush.h index e5e000de3c3..d81a77545a0 100644 --- a/include/asm-blackfin/cacheflush.h +++ b/include/asm-blackfin/cacheflush.h @@ -48,9 +48,9 @@ extern void blackfin_dflush_page(void *); static inline void flush_icache_range(unsigned start, unsigned end) { -#if defined(CONFIG_BLKFIN_DCACHE) && defined(CONFIG_BLKFIN_CACHE) +#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_ICACHE) -# if defined(CONFIG_BLKFIN_WT) +# if defined(CONFIG_BFIN_WT) blackfin_icache_flush_range((start), (end)); # else blackfin_icache_dcache_flush_range((start), (end)); @@ -58,10 +58,10 @@ static inline void flush_icache_range(unsigned start, unsigned end) #else -# if defined(CONFIG_BLKFIN_CACHE) +# if defined(CONFIG_BFIN_ICACHE) blackfin_icache_flush_range((start), (end)); # endif -# if defined(CONFIG_BLKFIN_DCACHE) +# if defined(CONFIG_BFIN_DCACHE) blackfin_dcache_flush_range((start), (end)); # endif @@ -74,12 +74,12 @@ do { memcpy(dst, src, len); \ } while (0) #define copy_from_user_page(vma, page, vaddr, dst, src, len) memcpy(dst, src, len) -#if defined(CONFIG_BLKFIN_DCACHE) +#if defined(CONFIG_BFIN_DCACHE) # define invalidate_dcache_range(start,end) blackfin_dcache_invalidate_range((start), (end)) #else # define invalidate_dcache_range(start,end) do { } while (0) #endif -#if defined(CONFIG_BLKFIN_DCACHE) && defined(CONFIG_BLKFIN_WB) +#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_WB) # define flush_dcache_range(start,end) blackfin_dcache_flush_range((start), (end)) # define flush_dcache_page(page) blackfin_dflush_page(page_address(page)) #else @@ -87,4 +87,4 @@ do { memcpy(dst, src, len); \ # define flush_dcache_page(page) do { } while (0) #endif -#endif /* _BLACKFIN_CACHEFLUSH_H */ +#endif /* _BLACKFIN_ICACHEFLUSH_H */ diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h index e0dd56bfa4c..06828d77a58 100644 --- a/include/asm-blackfin/cplb.h +++ b/include/asm-blackfin/cplb.h @@ -1,17 +1,100 @@ -/************************************************************************ +/* + * File: include/asm-blackfin/cplb.h + * Based on: include/asm-blackfin/mach-bf537/bf537.h + * Author: Robin Getz <rgetz@blackfin.uclinux.org> * - * cplb.h + * Created: 2000 + * Description: Common CPLB definitions for CPLB init * - * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. + * Modified: + * Copyright 2004-2007 Analog Devices Inc. * - ************************************************************************/ - -/* Defines necessary for cplb initialisation routines. */ + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ #ifndef _CPLB_H #define _CPLB_H -# include <asm/blackfin.h> +#include <asm/blackfin.h> +#include <asm/mach/anomaly.h> + +#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) +#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) +#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BFIN_WT/CONFIG_BFIN_WB*/ + +#if ANOMALY_05000158 +#define ANOMALY_05000158_WORKAROUND 0x200 +#else +#define ANOMALY_05000158_WORKAROUND 0x0 +#endif + +#define CPLB_COMMON (CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) + +#ifdef CONFIG_BFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_COMMON) +#else /*Write Through */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON) +#endif + +#define L1_DMEMORY (CPLB_LOCK | CPLB_COMMON) +#define L2_MEMORY (CPLB_COMMON) +#define SDRAM_DNON_CHBL (CPLB_COMMON) +#define SDRAM_EBIU (CPLB_COMMON) +#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) + +#define SIZE_1K 0x00000400 /* 1K */ +#define SIZE_4K 0x00001000 /* 4K */ +#define SIZE_1M 0x00100000 /* 1M */ +#define SIZE_4M 0x00400000 /* 4M */ + +#define MAX_CPLBS (16 * 2) + +#define ASYNC_MEMORY_CPLB_COVERAGE ((ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ + ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) / SIZE_4M) + +/* +* Number of required data CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 16 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Data Memory +* possibly 1 for L2 Data Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +* 1 for ASYNC Memory +*/ + + +#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1 \ + + ASYNC_MEMORY_CPLB_COVERAGE) * 2) + +/* +* Number of required instruction CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 12 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Instruction Memory +* possibly 1 for L2 Instruction Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +*/ + +#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1 + 1) * 2) + #define CPLB_ENABLE_ICACHE_P 0 #define CPLB_ENABLE_DCACHE_P 1 @@ -39,8 +122,6 @@ #define CPLB_DEF_CACHE CPLB_L1_CHBL | CPLB_WT #define CPLB_CACHE_ENABLED CPLB_L1_CHBL | CPLB_DIRTY -#define CPLB_ALL_ACCESS CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR - #define CPLB_I_PAGE_MGMT CPLB_LOCK | CPLB_VALID #define CPLB_D_PAGE_MGMT CPLB_LOCK | CPLB_ALL_ACCESS | CPLB_VALID #define CPLB_DNOCACHE CPLB_ALL_ACCESS | CPLB_VALID diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h index be0d913e551..b42a531e7a1 100644 --- a/include/asm-blackfin/dma.h +++ b/include/asm-blackfin/dma.h @@ -152,6 +152,7 @@ struct dma_channel { /* functions to set register mode */ void set_dma_start_addr(unsigned int channel, unsigned long addr); void set_dma_next_desc_addr(unsigned int channel, unsigned long addr); +void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr); void set_dma_x_count(unsigned int channel, unsigned short x_count); void set_dma_x_modify(unsigned int channel, short x_modify); void set_dma_y_count(unsigned int channel, unsigned short y_count); @@ -159,6 +160,7 @@ void set_dma_y_modify(unsigned int channel, short y_modify); void set_dma_config(unsigned int channel, unsigned short config); unsigned short set_bfin_dma_config(char direction, char flow_mode, char intr_mode, char dma_mode, char width); +void set_dma_curr_addr(unsigned int channel, unsigned long addr); /* get curr status for polling */ unsigned short get_dma_curr_irqstat(unsigned int channel); diff --git a/include/asm-blackfin/early_printk.h b/include/asm-blackfin/early_printk.h new file mode 100644 index 00000000000..110f1c1f845 --- /dev/null +++ b/include/asm-blackfin/early_printk.h @@ -0,0 +1,28 @@ +/* + * File: include/asm-blackfin/early_printk.h + * Author: Robin Getz <rgetz@blackfin.uclinux.org + * + * Created: 14Aug2007 + * Description: function prototpyes for early printk + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifdef CONFIG_EARLY_PRINTK +extern int setup_early_printk(char *); +#else +#define setup_early_printk(fmt) do { } while (0) +#endif /* CONFIG_EARLY_PRINTK */ diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h index 7480cfa7e2d..dd203cd9379 100644 --- a/include/asm-blackfin/gpio.h +++ b/include/asm-blackfin/gpio.h @@ -144,6 +144,24 @@ #ifdef BF533_FAMILY #define MAX_BLACKFIN_GPIOS 16 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 + #endif #ifdef BF537_FAMILY @@ -421,6 +439,19 @@ unsigned short gpio_get_value(unsigned short gpio); void gpio_direction_input(unsigned short gpio); void gpio_direction_output(unsigned short gpio); +#include <asm-generic/gpio.h> /* cansleep wrappers */ +#include <asm/irq.h> + +static inline int gpio_to_irq(unsigned gpio) +{ + return (gpio + GPIO_IRQ_BASE); +} + +static inline int irq_to_gpio(unsigned irq) +{ + return (irq - GPIO_IRQ_BASE); +} + #endif /* __ASSEMBLY__ */ #endif /* __ARCH_BLACKFIN_GPIO_H__ */ diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index 142cb333db2..525179bf43d 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -115,21 +115,21 @@ static inline unsigned int readl(const volatile void __iomem *addr) #ifndef __ASSEMBLY__ -extern void outsb(void __iomem *port, const void *addr, unsigned short count); -extern void outsw(void __iomem *port, const void *addr, unsigned short count); -extern void outsl(void __iomem *port, const void *addr, unsigned short count); +extern void outsb(unsigned long port, const void *addr, unsigned long count); +extern void outsw(unsigned long port, const void *addr, unsigned long count); +extern void outsl(unsigned long port, const void *addr, unsigned long count); -extern void insb(const void __iomem *port, void *addr, unsigned short count); -extern void insw(const void __iomem *port, void *addr, unsigned short count); -extern void insl(const void __iomem *port, void *addr, unsigned short count); +extern void insb(unsigned long port, void *addr, unsigned long count); +extern void insw(unsigned long port, void *addr, unsigned long count); +extern void insl(unsigned long port, void *addr, unsigned long count); -extern void dma_outsb(void __iomem *port, const void *addr, unsigned short count); -extern void dma_outsw(void __iomem *port, const void *addr, unsigned short count); -extern void dma_outsl(void __iomem *port, const void *addr, unsigned short count); +extern void dma_outsb(unsigned long port, const void *addr, unsigned short count); +extern void dma_outsw(unsigned long port, const void *addr, unsigned short count); +extern void dma_outsl(unsigned long port, const void *addr, unsigned short count); -extern void dma_insb(const void __iomem *port, void *addr, unsigned short count); -extern void dma_insw(const void __iomem *port, void *addr, unsigned short count); -extern void dma_insl(const void __iomem *port, void *addr, unsigned short count); +extern void dma_insb(unsigned long port, void *addr, unsigned short count); +extern void dma_insw(unsigned long port, void *addr, unsigned short count); +extern void dma_insl(unsigned long port, void *addr, unsigned short count); /* * Map some physical address range into the kernel address space. diff --git a/include/asm-blackfin/ioctls.h b/include/asm-blackfin/ioctls.h index 8356204151d..895e3173165 100644 --- a/include/asm-blackfin/ioctls.h +++ b/include/asm-blackfin/ioctls.h @@ -47,8 +47,13 @@ #define TIOCSBRK 0x5427 /* BSD compatibility */ #define TIOCCBRK 0x5428 /* BSD compatibility */ #define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TCGETS2 _IOR('T', 0x2A, struct termios2) +#define TCSETS2 _IOW('T', 0x2B, struct termios2) +#define TCSETSW2 _IOW('T', 0x2C, struct termios2) +#define TCSETSF2 _IOW('T', 0x2D, struct termios2) +/* Get Pty Number (of pty-mux device) */ +#define TIOCGPTN _IOR('T', 0x30, unsigned int) +#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 diff --git a/include/asm-blackfin/irq_handler.h b/include/asm-blackfin/irq_handler.h index d830f0a49a1..139b5208f9d 100644 --- a/include/asm-blackfin/irq_handler.h +++ b/include/asm-blackfin/irq_handler.h @@ -1,13 +1,15 @@ #ifndef _IRQ_HANDLER_H #define _IRQ_HANDLER_H +#include <linux/types.h> +#include <linux/linkage.h> + /* BASE LEVEL interrupt handler routines */ -asmlinkage void evt_emulation(void); asmlinkage void evt_exception(void); asmlinkage void trap(void); asmlinkage void evt_ivhw(void); asmlinkage void evt_timer(void); -asmlinkage void evt_evt2(void); +asmlinkage void evt_nmi(void); asmlinkage void evt_evt7(void); asmlinkage void evt_evt8(void); asmlinkage void evt_evt9(void); @@ -18,5 +20,14 @@ asmlinkage void evt_evt13(void); asmlinkage void evt_soft_int1(void); asmlinkage void evt_system_call(void); asmlinkage void init_exception_buff(void); +asmlinkage void trap_c(struct pt_regs *fp); +asmlinkage void ex_replaceable(void); +asmlinkage void early_trap(void); + +extern void *ex_table[]; +extern void return_from_exception(void); + +extern int bfin_request_exception(unsigned int exception, void (*handler)(void)); +extern int bfin_free_exception(unsigned int exception, void (*handler)(void)); #endif diff --git a/include/asm-blackfin/kgdb.h b/include/asm-blackfin/kgdb.h index 532bd905200..0f73847fd6b 100644 --- a/include/asm-blackfin/kgdb.h +++ b/include/asm-blackfin/kgdb.h @@ -179,5 +179,6 @@ enum regnames { #define STATDA1 0x80 extern void kgdb_print(const char *fmt, ...); +extern void init_kgdb_uart(void); #endif diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h new file mode 100644 index 00000000000..991db986cd4 --- /dev/null +++ b/include/asm-blackfin/mach-bf527/anomaly.h @@ -0,0 +1,41 @@ +/* + * File: include/asm-blackfin/mach-bf527/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2004-2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* This file shoule be up to date with: + * - Revision A, May 30, 2007; ADSP-BF527 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (1) +/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ +#define ANOMALY_05000301 (1) +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* Incorrect Access of OTP_STATUS During otp_write() Function */ +#define ANOMALY_05000328 (1) +/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ +#define ANOMALY_05000337 (1) +/* TWI Does Not Operate Correctly Under Certain Signal Termination Conditions */ +#define ANOMALY_05000342 (1) +/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */ +#define ANOMALY_05000347 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000323 (0) +#endif diff --git a/include/asm-blackfin/mach-bf527/defBF52x_base.h b/include/asm-blackfin/mach-bf527/defBF52x_base.h index 0b2fb5036ed..b1ff67db01f 100644 --- a/include/asm-blackfin/mach-bf527/defBF52x_base.h +++ b/include/asm-blackfin/mach-bf527/defBF52x_base.h @@ -102,6 +102,7 @@ /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI0_REGBASE 0xFFC00500 #define SPI_CTL 0xFFC00500 /* SPI Control Register */ #define SPI_FLG 0xFFC00504 /* SPI Flag register */ #define SPI_STAT 0xFFC00508 /* SPI Status register */ @@ -480,6 +481,7 @@ /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define TWI0_REGBASE 0xFFC01400 #define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ #define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ #define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h index 7302f290b93..f36ff5af1b9 100644 --- a/include/asm-blackfin/mach-bf533/anomaly.h +++ b/include/asm-blackfin/mach-bf533/anomaly.h @@ -1,247 +1,259 @@ /* - * File: include/asm-blackfin/mach-bf533/anomaly.h - * Based on: - * Author: + * File: include/asm-blackfin/mach-bf533/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Copyright (C) 2004-2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - Revision U, May 17, 2006; ADSP-BF533 Blackfin Processor Anomaly List - * - Revision Y, May 17, 2006; ADSP-BF532 Blackfin Processor Anomaly List - * - Revision T, May 17, 2006; ADSP-BF531 Blackfin Processor Anomaly List + * - Revision X, March 23, 2007; ADSP-BF533 Blackfin Processor Anomaly List + * - Revision AB, March 23, 2007; ADSP-BF532 Blackfin Processor Anomaly List + * - Revision W, March 23, 2007; ADSP-BF531 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ /* We do not support 0.1 or 0.2 silicon - sorry */ -#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2)) -#error Kernel will not work on BF533 Version 0.1 or 0.2 +#if __SILICON_REVISION__ < 3 +# error Kernel will not work on BF533 silicon version 0.0, 0.1, or 0.2 #endif -/* Issues that are common to 0.5, 0.4, and 0.3 silicon */ -#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) \ - || defined(CONFIG_BF_REV_0_3)) -#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in - slot1 and store of a P register in slot 2 is not - supported */ -#define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on - every corresponding match */ -#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive - Channel DMA stops */ -#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR - registers. */ -#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out - upper bits*/ -#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ -#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame - syncs */ -#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not - functional */ -#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable - state */ -#define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */ -#define ANOMALY_05000272 /* Certain data cache write through modes fail for - VDDint <=0.9V */ -#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ -#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after - an edge is detected may clear interrupt */ -#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause - DMA system instability */ -#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is - not restored */ -#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic - control */ -#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when - killed in a particular stage*/ -#define ANOMALY_05000311 /* Erroneous flag pin operations under specific - sequences */ -#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC - registers are interrupted */ -#define ANOMALY_05000313 /* PPI Is Level-Sensitive on First Transfer */ -#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously On - * Next System MMR Access */ -#define ANOMALY_05000319 /* Internal Voltage Regulator Values of 1.05V, 1.10V - * and 1.15V Not Allowed for LQFP Packages */ -#endif /* Issues that are common to 0.5, 0.4, and 0.3 silicon */ +#if defined(__ADSPBF531__) +# define ANOMALY_BF531 1 +#else +# define ANOMALY_BF531 0 +#endif +#if defined(__ADSPBF532__) +# define ANOMALY_BF532 1 +#else +# define ANOMALY_BF532 0 +#endif +#if defined(__ADSPBF533__) +# define ANOMALY_BF533 1 +#else +# define ANOMALY_BF533 0 +#endif -/* These issues only occur on 0.3 or 0.4 BF533 */ -#if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3)) -#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not - updated at the same time. */ -#define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data - Cache Fill can be corrupted after or during - Instruction DMA if certain core stalls exist */ -#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General - Purpose TX or RX modes */ -#define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by - preceding memory read */ -#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during - inactive channels in certain conditions */ -#define ANOMALY_05000202 /* Possible infinite stall with specific dual dag - situation */ -#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ -#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ -#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect - data*/ -#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate - Differences in certain Conditions */ -#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ -#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to - hardware reset */ -#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or - IDLE around a Change of Control causes - unpredictable results */ -#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the - shadow of a conditional branch */ -#define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware - errors */ -#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ -#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event - interrupt not functional */ -#define ANOMALY_05000257 /* An interrupt or exception during short Hardware - loops may cause the instruction fetch unit to - malfunction */ -#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of - the ICPLB Data registers differ */ -#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ -#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ -#define ANOMALY_05000262 /* Stores to data cache may be lost */ -#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ -#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE - instruction will cause an infinite stall in the - second to last instruction in a hardware loop */ -#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on - SPORT external receive and transmit clocks. */ -#define ANOMALY_05000269 /* High I/O activity causes the output voltage of the - internal voltage regulator (VDDint) to increase. */ -#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the - internal voltage regulator (VDDint) to decrease */ -#endif /* issues only occur on 0.3 or 0.4 BF533 */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +#define ANOMALY_05000074 (1) +/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ +#define ANOMALY_05000099 (__SILICON_REVISION__ < 5) +/* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */ +#define ANOMALY_05000105 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */ +#define ANOMALY_05000158 (__SILICON_REVISION__ < 5) +/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +#define ANOMALY_05000166 (1) +/* Turning Serial Ports on with External Frame Syncs */ +#define ANOMALY_05000167 (1) +/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ +#define ANOMALY_05000179 (__SILICON_REVISION__ < 5) +/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ +#define ANOMALY_05000180 (1) +/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */ +#define ANOMALY_05000183 (__SILICON_REVISION__ < 4) +/* False Protection Exceptions */ +#define ANOMALY_05000189 (__SILICON_REVISION__ < 4) +/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ +#define ANOMALY_05000193 (__SILICON_REVISION__ < 4) +/* Restarting SPORT in Specific Modes May Cause Data Corruption */ +#define ANOMALY_05000194 (__SILICON_REVISION__ < 4) +/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +#define ANOMALY_05000198 (__SILICON_REVISION__ < 5) +/* Current DMA Address Shows Wrong Value During Carry Fix */ +#define ANOMALY_05000199 (__SILICON_REVISION__ < 4) +/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */ +#define ANOMALY_05000200 (__SILICON_REVISION__ < 5) +/* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */ +#define ANOMALY_05000201 (__SILICON_REVISION__ < 4) +/* Possible Infinite Stall with Specific Dual-DAG Situation */ +#define ANOMALY_05000202 (__SILICON_REVISION__ < 5) +/* Specific Sequence That Can Cause DMA Error or DMA Stopping */ +#define ANOMALY_05000203 (__SILICON_REVISION__ < 4) +/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533) +/* Recovery from "Brown-Out" Condition */ +#define ANOMALY_05000207 (__SILICON_REVISION__ < 4) +/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */ +#define ANOMALY_05000208 (1) +/* Speed Path in Computational Unit Affects Certain Instructions */ +#define ANOMALY_05000209 (__SILICON_REVISION__ < 4) +/* UART TX Interrupt Masked Erroneously */ +#define ANOMALY_05000215 (__SILICON_REVISION__ < 5) +/* NMI Event at Boot Time Results in Unpredictable State */ +#define ANOMALY_05000219 (1) +/* Incorrect Pulse-Width of UART Start Bit */ +#define ANOMALY_05000225 (__SILICON_REVISION__ < 5) +/* Scratchpad Memory Bank Reads May Return Incorrect Data */ +#define ANOMALY_05000227 (__SILICON_REVISION__ < 5) +/* SPI Slave Boot Mode Modifies Registers from Reset Value */ +#define ANOMALY_05000229 (1) +/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */ +#define ANOMALY_05000230 (__SILICON_REVISION__ < 5) +/* UART STB Bit Incorrectly Affects Receiver Setting */ +#define ANOMALY_05000231 (__SILICON_REVISION__ < 5) +/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */ +#define ANOMALY_05000233 (__SILICON_REVISION__ < 4) +/* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000234 (__SILICON_REVISION__ == 4) +/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */ +#define ANOMALY_05000242 (__SILICON_REVISION__ < 4) +/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 5) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Data CPLBs Should Prevent Spurious Hardware Errors */ +#define ANOMALY_05000246 (__SILICON_REVISION__ < 5) +/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ +#define ANOMALY_05000250 (__SILICON_REVISION__ == 4) +/* Maximum External Clock Speed for Timers */ +#define ANOMALY_05000253 (__SILICON_REVISION__ < 5) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (__SILICON_REVISION__ > 4) +/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */ +#define ANOMALY_05000255 (__SILICON_REVISION__ < 5) +/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ +#define ANOMALY_05000257 (__SILICON_REVISION__ < 5) +/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */ +#define ANOMALY_05000258 (__SILICON_REVISION__ < 5) +/* ICPLB_STATUS MMR Register May Be Corrupted */ +#define ANOMALY_05000260 (__SILICON_REVISION__ < 5) +/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 5) +/* Stores To Data Cache May Be Lost */ +#define ANOMALY_05000262 (__SILICON_REVISION__ < 5) +/* Hardware Loop Corrupted When Taking an ICPLB Exception */ +#define ANOMALY_05000263 (__SILICON_REVISION__ < 5) +/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */ +#define ANOMALY_05000264 (__SILICON_REVISION__ < 5) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (__SILICON_REVISION__ < 5) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */ +#define ANOMALY_05000269 (__SILICON_REVISION__ < 5) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ +#define ANOMALY_05000270 (__SILICON_REVISION__ < 5) +/* Spontaneous Reset of Internal Voltage Regulator */ +#define ANOMALY_05000271 (__SILICON_REVISION__ < 4) +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ +#define ANOMALY_05000272 (1) +/* Writes to Synchronous SDRAM Memory May Be Lost */ +#define ANOMALY_05000273 (1) +/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ +#define ANOMALY_05000276 (1) +/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */ +#define ANOMALY_05000277 (1) +/* Disabling Peripherals with DMA Running May Cause DMA System Instability */ +#define ANOMALY_05000278 (1) +/* False Hardware Error Exception When ISR Context Is Not Restored */ +#define ANOMALY_05000281 (1) +/* Memory DMA Corruption with 32-Bit Data and Traffic Control */ +#define ANOMALY_05000282 (1) +/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +#define ANOMALY_05000283 (1) +/* SPORTs May Receive Bad Data If FIFOs Fill Up */ +#define ANOMALY_05000288 (1) +/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ +#define ANOMALY_05000301 (1) +/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +#define ANOMALY_05000302 (__SILICON_REVISION__ < 5) +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +#define ANOMALY_05000305 (__SILICON_REVISION__ < 5) +/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ +#define ANOMALY_05000306 (__SILICON_REVISION__ < 5) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */ +#define ANOMALY_05000311 (1) +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* PPI Is Level-Sensitive on First Transfer */ +#define ANOMALY_05000313 (1) +/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +#define ANOMALY_05000315 (1) +/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */ +#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532) -/* These issues are only on 0.4 silicon */ -#if (defined(CONFIG_BF_REV_0_4)) -#define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */ -#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel - (TDM) */ -#endif /* issues are only on 0.4 silicon */ +/* These anomalies have been "phased" out of analog.com anomaly sheets and are + * here to show running on older silicon just isn't feasible. + */ -/* These issues are only on 0.3 silicon */ -#if defined(CONFIG_BF_REV_0_3) -#define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with - External Frame Syncs */ -#define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative - Instruction or Data Fetches, or by Fetches at the - boundary of reserved memory space */ -#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs - when polarity setting is changed */ -#define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data - corruption */ -#define ANOMALY_05000199 /* DMA current address shows wrong value during carry - fix */ -#define ANOMALY_05000201 /* Receive frame sync not ignored during active - frames in sport MCM */ -#define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA - stopping */ -#if defined(CONFIG_BF533) -#define ANOMALY_05000204 /* Incorrect data read with write-through cache and - allocate cache lines on reads only mode */ -#endif /* CONFIG_BF533 */ -#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ -#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain - instructions */ -#define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame - Sync Transmit Mode */ -#define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */ -#endif /* only on 0.3 silicon */ +/* Watchpoints (Hardware Breakpoints) are not supported */ +#define ANOMALY_05000067 (__SILICON_REVISION__ < 3) +/* Reserved bits in SYSCFG register not set at power on */ +#define ANOMALY_05000109 (__SILICON_REVISION__ < 3) +/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ +#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) +/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */ +#define ANOMALY_05000123 (__SILICON_REVISION__ < 3) +/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ +#define ANOMALY_05000124 (__SILICON_REVISION__ < 3) +/* Erroneous exception when enabling cache */ +#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) +/* SPI clock polarity and phase bits incorrect during booting */ +#define ANOMALY_05000126 (__SILICON_REVISION__ < 3) +/* DMEM_CONTROL is not set on Reset */ +#define ANOMALY_05000137 (__SILICON_REVISION__ < 3) +/* SPI boot will not complete if there is a zero fill block in the loader file */ +#define ANOMALY_05000138 (__SILICON_REVISION__ < 3) +/* Allowing the SPORT RX FIFO to fill will cause an overflow */ +#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) +/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ +#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) +/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ +#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) +/* A read from external memory may return a wrong value with data cache enabled */ +#define ANOMALY_05000143 (__SILICON_REVISION__ < 3) +/* DMA and TESTSET conflict when both are accessing external memory */ +#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) +/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ +#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) +/* MDMA may lose the first few words of a descriptor chain */ +#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) +/* The source MDMA descriptor may stop with a DMA Error */ +#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) +/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */ +#define ANOMALY_05000148 (__SILICON_REVISION__ < 3) +/* Frame Delay in SPORT Multichannel Mode */ +#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) +/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */ +#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) +/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */ +#define ANOMALY_05000155 (__SILICON_REVISION__ < 3) +/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) +/* SPORT transmit data is not gated by external frame sync in certain conditions */ +#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) +/* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000168 (__SILICON_REVISION__ < 3) +/* DATA CPLB page miss can result in lost write-through cache data writes */ +#define ANOMALY_05000169 (__SILICON_REVISION__ < 3) +/* DMA vs Core accesses to external memory */ +#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) +/* Cache Fill Buffer Data lost */ +#define ANOMALY_05000174 (__SILICON_REVISION__ < 3) +/* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000175 (__SILICON_REVISION__ < 3) +/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +#define ANOMALY_05000176 (__SILICON_REVISION__ < 3) +/* Disabling the PPI resets the PPI configuration registers */ +#define ANOMALY_05000181 (__SILICON_REVISION__ < 3) +/* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000185 (__SILICON_REVISION__ < 3) +/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ +#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) +/* In PPI Transmit Modes with External Frame Syncs POLC */ +#define ANOMALY_05000192 (__SILICON_REVISION__ < 3) +/* Internal Voltage Regulator may not start up */ +#define ANOMALY_05000206 (__SILICON_REVISION__ < 3) -#if defined(CONFIG_BF_REV_0_2) -#define ANOMALY_05000067 /* Watchpoints (Hardware Breakpoints) are not - * supported */ -#define ANOMALY_05000109 /* Reserved bits in SYSCFG register not set at - * power on */ -#define ANOMALY_05000116 /* Trace Buffers may record discontinuities into - * emulation mode and/or exception, NMI, reset - * handlers */ -#define ANOMALY_05000123 /* DTEST_COMMAND initiated memory access may be - * incorrect if data cache or DMA is active */ -#define ANOMALY_05000124 /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, - * or 1:1 */ -#define ANOMALY_05000125 /* Erroneous exception when enabling cache */ -#define ANOMALY_05000126 /* SPI clock polarity and phase bits incorrect - * during booting */ -#define ANOMALY_05000137 /* DMEM_CONTROL is not set on Reset */ -#define ANOMALY_05000138 /* SPI boot will not complete if there is a zero fill - * block in the loader file */ -#define ANOMALY_05000140 /* Allowing the SPORT RX FIFO to fill will cause an - * overflow */ -#define ANOMALY_05000141 /* An Infinite Stall occurs with a particular sequence - * of consecutive dual dag events */ -#define ANOMALY_05000142 /* Interrupts may be lost when a programmable input - * flag is configured to be edge sensitive */ -#define ANOMALY_05000143 /* A read from external memory may return a wrong - * value with data cache enabled */ -#define ANOMALY_05000144 /* DMA and TESTSET conflict when both are accessing - * external memory */ -#define ANOMALY_05000145 /* In PWM_OUT mode, you must enable the PPI block to - * generate a waveform from PPI_CLK */ -#define ANOMALY_05000146 /* MDMA may lose the first few words of a descriptor - * chain */ -#define ANOMALY_05000147 /* The source MDMA descriptor may stop with a DMA - * Error */ -#define ANOMALY_05000148 /* When booting from a 16-bit asynchronous memory - * device, the upper 8-bits of each word must be - * 0x00 */ -#define ANOMALY_05000153 /* Frame Delay in SPORT Multichannel Mode */ -#define ANOMALY_05000154 /* SPORT TFS signal is active in Multi-channel mode - * outside of valid channels */ -#define ANOMALY_05000155 /* Timer1 can not be used for PWMOUT mode when a - * certain PPI mode is in use */ -#define ANOMALY_05000157 /* A killed 32-bit System MMR write will lead to - * the next system MMR access thinking it should be - * 32-bit. */ -#define ANOMALY_05000163 /* SPORT transmit data is not gated by external frame - * sync in certain conditions */ -#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */ -#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost - * write-through cache data writes */ -#define ANOMALY_05000173 /* DMA vs Core accesses to external memory */ -#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */ -#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */ -#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an - * accumulator saturation */ -#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration - * registers */ -#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */ -#define ANOMALY_05000191 /* PPI does not invert the Driving PPICLK edge in - * Transmit Modes */ -#define ANOMALY_05000192 /* In PPI Transmit Modes with External Frame Syncs - * POLC */ -#define ANOMALY_05000206 /* Internal Voltage Regulator may not start up */ +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000266 (0) +#define ANOMALY_05000323 (0) #endif - -#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/include/asm-blackfin/mach-bf533/bf533.h index 185fc128485..12a41693199 100644 --- a/include/asm-blackfin/mach-bf533/bf533.h +++ b/include/asm-blackfin/mach-bf533/bf533.h @@ -52,12 +52,12 @@ /***************************/ -#define BLKFIN_DSUBBANKS 4 -#define BLKFIN_DWAYS 2 -#define BLKFIN_DLINES 64 -#define BLKFIN_ISUBBANKS 4 -#define BLKFIN_IWAYS 4 -#define BLKFIN_ILINES 32 +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 #define WAY0_L 0x1 #define WAY1_L 0x2 @@ -141,97 +141,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) -#define MAX_VC 650000000 -#define MIN_VC 50000000 - -#ifdef CONFIG_BFIN_KERNEL_CLOCK -/********************************PLL Settings **************************************/ -#if (CONFIG_VCO_MULT < 0) -#error "VCO Multiplier is less than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT == 0) -#error "VCO Multiplier should be greater than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT > 64) -#error "VCO Multiplier is more than 64. Please select a different value" -#endif - -#ifndef CONFIG_CLKIN_HALF -#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -#else -#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) -#endif - -#ifndef CONFIG_PLL_BYPASS -#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) -#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#if (CONFIG_SCLK_DIV < 1) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_SCLK_DIV > 15) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_CCLK_DIV != 1) -#if (CONFIG_CCLK_DIV != 2) -#if (CONFIG_CCLK_DIV != 4) -#if (CONFIG_CCLK_DIV != 8) -#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" -#endif -#endif -#endif -#endif - -#if (CONFIG_VCO_HZ > MAX_VC) -#error "VCO selected is more than maximum value. Please change the VCO multipler" -#endif - -#if (CONFIG_SCLK_HZ > 133000000) -#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ < 27000000) -#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) -#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) -#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) -#error "Please select sclk less than cclk" -#endif -#endif -#endif - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1) -#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK -#endif - -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ - #ifdef CONFIG_BF533 #define CPU "BF533" #define CPUID 0x027a5000 @@ -249,58 +158,4 @@ #define CPUID 0x0 #endif -#if (CONFIG_MEM_SIZE % 4) -#error "SDRAM mem size must be multible of 4MB" -#endif - -#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) -#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) -#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158_WORKAROUND 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#else /*Write Through */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_DIRTY \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#endif - -#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) -#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) -#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) -#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) - -#define SIZE_1K 0x00000400 /* 1K */ -#define SIZE_4K 0x00001000 /* 4K */ -#define SIZE_1M 0x00100000 /* 1M */ -#define SIZE_4M 0x00400000 /* 4M */ - -#define MAX_CPLBS (16 * 2) - -/* -* Number of required data CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 16 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Data Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -* 1 for ASYNC Memory -*/ - - -#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2) - -/* -* Number of required instruction CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 12 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Instruction Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -*/ - -#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2) - #endif /* __MACH_BF533_H__ */ diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/include/asm-blackfin/mach-bf533/blackfin.h index e4384491e97..f3b240abf17 100644 --- a/include/asm-blackfin/mach-bf533/blackfin.h +++ b/include/asm-blackfin/mach-bf533/blackfin.h @@ -38,7 +38,7 @@ #include "defBF532.h" #include "anomaly.h" -#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY)) +#if !defined(__ASSEMBLY__) #include "cdefBF532.h" #endif diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/include/asm-blackfin/mach-bf533/cdefBF532.h index 74f967b235e..c803e14b529 100644 --- a/include/asm-blackfin/mach-bf533/cdefBF532.h +++ b/include/asm-blackfin/mach-bf533/cdefBF532.h @@ -30,11 +30,9 @@ #ifndef _CDEF_BF532_H #define _CDEF_BF532_H -/* -#if !defined(__ADSPLPBLACKFIN__) -#warning cdefBF532.h should only be included for 532 compatible chips. -#endif -*/ + +#include <asm/blackfin.h> + /*include all Core registers and bit definitions*/ #include "defBF532.h" @@ -65,7 +63,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write32(SIC_IWR, IWR_ENABLE(0)); bfin_write16(VR_CTL, val); - __builtin_bfin_ssync(); + SSYNC(); local_irq_save(flags); asm("IDLE;"); @@ -132,10 +130,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */ #define bfin_read_FIO_DIR() bfin_read16(FIO_DIR) #define bfin_write_FIO_DIR(val) bfin_write16(FIO_DIR,val) -#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) -#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C,val) -#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) -#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S,val) #define bfin_read_FIO_MASKA_C() bfin_read16(FIO_MASKA_C) #define bfin_write_FIO_MASKA_C(val) bfin_write16(FIO_MASKA_C,val) #define bfin_read_FIO_MASKA_S() bfin_read16(FIO_MASKA_S) @@ -152,10 +146,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_write_FIO_BOTH(val) bfin_write16(FIO_BOTH,val) #define bfin_read_FIO_INEN() bfin_read16(FIO_INEN) #define bfin_write_FIO_INEN(val) bfin_write16(FIO_INEN,val) -#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) -#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D,val) -#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) -#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T,val) #define bfin_read_FIO_MASKA_D() bfin_read16(FIO_MASKA_D) #define bfin_write_FIO_MASKA_D(val) bfin_write16(FIO_MASKA_D,val) #define bfin_read_FIO_MASKA_T() bfin_read16(FIO_MASKA_T) @@ -165,6 +155,50 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T) #define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val) + +#if ANOMALY_05000311 +#define BFIN_WRITE_FIO_FLAG(name) \ +static __inline__ void bfin_write_FIO_FLAG_ ## name (unsigned short val)\ +{\ + unsigned long flags;\ + local_irq_save(flags);\ + bfin_write16(FIO_FLAG_ ## name,val);\ + bfin_read_CHIPID();\ + local_irq_restore(flags);\ +} +BFIN_WRITE_FIO_FLAG(D) +BFIN_WRITE_FIO_FLAG(C) +BFIN_WRITE_FIO_FLAG(S) +BFIN_WRITE_FIO_FLAG(T) + +#define BFIN_READ_FIO_FLAG(name) \ +static __inline__ unsigned short bfin_read_FIO_FLAG_ ## name (void)\ +{\ + unsigned long flags;\ + unsigned short ret;\ + local_irq_save(flags);\ + ret = bfin_read16(FIO_FLAG_ ## name);\ + bfin_read_CHIPID();\ + local_irq_restore(flags);\ + return ret;\ +} +BFIN_READ_FIO_FLAG(D) +BFIN_READ_FIO_FLAG(C) +BFIN_READ_FIO_FLAG(S) +BFIN_READ_FIO_FLAG(T) + +#else +#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D,val) +#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C,val) +#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S,val) +#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T,val) +#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) +#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) +#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) +#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) +#endif + + /* DMA Controller */ #define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) #define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val) diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h index 6a3cf93f8b5..37134aaf995 100644 --- a/include/asm-blackfin/mach-bf533/defBF532.h +++ b/include/asm-blackfin/mach-bf533/defBF532.h @@ -104,6 +104,7 @@ #define UART_GCTL 0xFFC00424 /* Global Control Register */ /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI0_REGBASE 0xFFC00500 #define SPI_CTL 0xFFC00500 /* SPI Control Register */ #define SPI_FLG 0xFFC00504 /* SPI Flag register */ #define SPI_STAT 0xFFC00508 /* SPI Status register */ @@ -928,7 +929,7 @@ #define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ #define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ #define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ -#define SPI_LEN 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ +#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ #define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ #define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ #define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h index 9879e68e315..452fb825d89 100644 --- a/include/asm-blackfin/mach-bf533/irq.h +++ b/include/asm-blackfin/mach-bf533/irq.h @@ -128,6 +128,8 @@ Core Emulation ** #define IRQ_PF14 47 #define IRQ_PF15 48 +#define GPIO_IRQ_BASE IRQ_PF0 + #ifdef CONFIG_IRQCHIP_DEMUX_GPIO #define NR_IRQS (IRQ_PF15+1) #else diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/include/asm-blackfin/mach-bf533/mem_map.h index e84baa3e939..94d8c4062eb 100644 --- a/include/asm-blackfin/mach-bf533/mem_map.h +++ b/include/asm-blackfin/mach-bf533/mem_map.h @@ -51,10 +51,10 @@ /* Level 1 Memory */ -#ifdef CONFIG_BLKFIN_CACHE -#define BLKFIN_ICACHESIZE (16*1024) +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) #else -#define BLKFIN_ICACHESIZE (0*1024) +#define BFIN_ICACHESIZE (0*1024) #endif /* Memory Map for ADSP-BF533 processors */ @@ -64,35 +64,35 @@ #define L1_DATA_A_START 0xFF800000 #define L1_DATA_B_START 0xFF900000 -#ifdef CONFIG_BLKFIN_CACHE +#ifdef CONFIG_BFIN_ICACHE #define L1_CODE_LENGTH (0x14000 - 0x4000) #else #define L1_CODE_LENGTH 0x14000 #endif -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH (0x8000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x8000 #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ #endif /* Memory Map for ADSP-BF532 processors */ @@ -102,36 +102,36 @@ #define L1_DATA_A_START 0xFF804000 #define L1_DATA_B_START 0xFF904000 -#ifdef CONFIG_BLKFIN_CACHE +#ifdef CONFIG_BFIN_ICACHE #define L1_CODE_LENGTH (0xC000 - 0x4000) #else #define L1_CODE_LENGTH 0xC000 #endif -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x4000 - 0x4000) #define L1_DATA_B_LENGTH 0x4000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x4000 - 0x4000) #define L1_DATA_B_LENGTH (0x4000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x4000 #define L1_DATA_B_LENGTH 0x4000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ #endif /* Memory Map for ADSP-BF531 processors */ @@ -144,16 +144,16 @@ #define L1_DATA_B_LENGTH 0x0000 -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x4000 - 0x4000) -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x4000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 #endif #endif diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h index 4453e614c3b..2b66ecf489f 100644 --- a/include/asm-blackfin/mach-bf537/anomaly.h +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -1,139 +1,144 @@ - /* - * File: include/asm-blackfin/mach-bf537/anomaly.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. + * File: include/asm-blackfin/mach-bf537/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Copyright (C) 2004-2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List - * - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List - * - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List + * - Revision M, March 13, 2007; ADSP-BF537 Blackfin Processor Anomaly List + * - Revision L, March 13, 2007; ADSP-BF536 Blackfin Processor Anomaly List + * - Revision M, March 13, 2007; ADSP-BF534 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ /* We do not support 0.1 silicon - sorry */ -#if (defined(CONFIG_BF_REV_0_1)) -#error Kernel will not work on BF537/6/4 Version 0.1 +#if __SILICON_REVISION__ < 2 +# error Kernel will not work on BF537 silicon version 0.0 or 0.1 #endif -#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2)) -#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in - slot1 and store of a P register in slot 2 is not - supported */ -#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive - Channel DMA stops */ -#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR - registers. */ -#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out - upper bits*/ -#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame - syncs */ -#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) -#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is - Changed */ -#endif -#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on - SPORT external receive and transmit clocks. */ -#define ANOMALY_05000272 /* Certain data cache write through modes fail for - VDDint <=0.9V */ -#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ -#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after - an edge is detected may clear interrupt */ -#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is - not restored */ -#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic - control */ -#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when - killed in a particular stage*/ -#define ANOMALY_05000310 /* False hardware errors caused by fetches at the - * boundary of reserved memory */ -#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC - registers are interrupted */ -#define ANOMALY_05000313 /* PPI is level sensitive on first transfer */ -#define ANOMALY_05000322 /* EMAC RMII mode at 10-Base-T speed: RX frames not - * received properly */ +#if defined(__ADSPBF534__) +# define ANOMALY_BF534 1 +#else +# define ANOMALY_BF534 0 #endif - -#if defined(CONFIG_BF_REV_0_2) -#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or - IDLE around a Change of Control causes - unpredictable results */ -#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel - (TDM) */ -#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) -#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */ +#if defined(__ADSPBF536__) +# define ANOMALY_BF536 1 +#else +# define ANOMALY_BF536 0 #endif -#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ -#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event - interrupt not functional */ -#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) -#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */ +#if defined(__ADSPBF537__) +# define ANOMALY_BF537 1 +#else +# define ANOMALY_BF537 0 #endif -#define ANOMALY_05000257 /* An interrupt or exception during short Hardware - loops may cause the instruction fetch unit to - malfunction */ -#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of - the ICPLB Data registers differ */ -#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ -#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ -#define ANOMALY_05000262 /* Stores to data cache may be lost */ -#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ -#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE - instruction will cause an infinite stall in the - second to last instruction in a hardware loop */ -#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running - and non-zero DEB_TRAFFIC_PERIOD value */ -#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the - internal voltage regulator (VDDint) to decrease */ -#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after - an edge is detected may clear interrupt */ -#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause - DMA system instability */ -#define ANOMALY_05000280 /* SPI Master boot mode does not work well with - Atmel Dataflash devices */ -#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context - * is not restored */ -#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic - * control */ -#define ANOMALY_05000283 /* System MMR Write Is Stalled Indefinitely When - * Killed in a Particular Stage */ -#define ANOMALY_05000285 /* New Feature: EMAC TX DMA Word Alignment - * (Not Available On Older Silicon) */ -#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */ -#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously - * On Next System MMR Access */ -#define ANOMALY_05000316 /* EMAC RMII mode: collisions occur in Full Duplex - * mode */ -#define ANOMALY_05000321 /* EMAC RMII mode: TX frames in half duplex fail with - * status No Carrier */ -#endif /* CONFIG_BF_REV_0_2 */ -#endif /* _MACH_ANOMALY_H_ */ +/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN bit is not valid after a Peripheral Receive Channel DMA stops */ +#define ANOMALY_05000119 (1) +/* Rx.H cannot be used to access 16-bit System MMR registers */ +#define ANOMALY_05000122 (1) +/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 2) +/* PPI_DELAY not functional in PPI modes with 0 frame syncs */ +#define ANOMALY_05000180 (1) +/* Instruction Cache Is Not Functional */ +#define ANOMALY_05000237 (__SILICON_REVISION__ < 2) +/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 3) +/* Spurious Hardware Error from an access in the shadow of a conditional branch */ +#define ANOMALY_05000245 (1) +/* CLKIN Buffer Output Enable Reset Behavior Is Changed */ +#define ANOMALY_05000247 (1) +/* Incorrect Bit-Shift of Data Word in Multichannel (TDM) mode in certain conditions */ +#define ANOMALY_05000250 (__SILICON_REVISION__ < 3) +/* EMAC Tx DMA error after an early frame abort */ +#define ANOMALY_05000252 (__SILICON_REVISION__ < 3) +/* Maximum external clock speed for Timers */ +#define ANOMALY_05000253 (__SILICON_REVISION__ < 3) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT mode with external clock */ +#define ANOMALY_05000254 (__SILICON_REVISION__ > 2) +/* Entering Hibernate Mode with RTC Seconds event interrupt not functional */ +#define ANOMALY_05000255 (__SILICON_REVISION__ < 3) +/* EMAC MDIO input latched on wrong MDC edge */ +#define ANOMALY_05000256 (__SILICON_REVISION__ < 3) +/* Interrupt/Exception during short hardware loop may cause bad instruction fetches */ +#define ANOMALY_05000257 (__SILICON_REVISION__ < 3) +/* Instruction Cache is corrupted when bits 9 and 12 of the ICPLB Data registers differ */ +#define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2) +/* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000260 (__SILICON_REVISION__ == 2) +/* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 3) +/* Stores to data cache may be lost */ +#define ANOMALY_05000262 (__SILICON_REVISION__ < 3) +/* Hardware loop corrupted when taking an ICPLB exception */ +#define ANOMALY_05000263 (__SILICON_REVISION__ == 2) +/* CSYNC/SSYNC/IDLE causes infinite stall in second to last instruction in hardware loop */ +#define ANOMALY_05000264 (__SILICON_REVISION__ < 3) +/* Sensitivity to noise with slow input edge rates on external SPORT TX and RX clocks */ +#define ANOMALY_05000265 (1) +/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */ +#define ANOMALY_05000268 (__SILICON_REVISION__ < 3) +/* High I/O activity causes output voltage of internal voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000270 (__SILICON_REVISION__ < 3) +/* Certain data cache write through modes fail for VDDint <=0.9V */ +#define ANOMALY_05000272 (1) +/* Writes to Synchronous SDRAM memory may be lost */ +#define ANOMALY_05000273 (__SILICON_REVISION__ < 3) +/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */ +#define ANOMALY_05000277 (__SILICON_REVISION__ < 3) +/* Disabling Peripherals with DMA running may cause DMA system instability */ +#define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2)) +/* SPI Master boot mode does not work well with Atmel Data flash devices */ +#define ANOMALY_05000280 (1) +/* False Hardware Error Exception when ISR context is not restored */ +#define ANOMALY_05000281 (__SILICON_REVISION__ < 3) +/* Memory DMA corruption with 32-bit data and traffic control */ +#define ANOMALY_05000282 (__SILICON_REVISION__ < 3) +/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +#define ANOMALY_05000283 (__SILICON_REVISION__ < 3) +/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */ +#define ANOMALY_05000285 (__SILICON_REVISION__ < 3) +/* SPORTs may receive bad data if FIFOs fill up */ +#define ANOMALY_05000288 (__SILICON_REVISION__ < 3) +/* Memory to memory DMA source/destination descriptors must be in same memory space */ +#define ANOMALY_05000301 (1) +/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ +#define ANOMALY_05000304 (__SILICON_REVISION__ < 3) +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +#define ANOMALY_05000305 (__SILICON_REVISION__ < 3) +/* SCKELOW Bit Does Not Maintain State Through Hibernate */ +#define ANOMALY_05000307 (__SILICON_REVISION__ < 3) +/* Writing UART_THR while UART clock is disabled sends erroneous start bit */ +#define ANOMALY_05000309 (__SILICON_REVISION__ < 3) +/* False hardware errors caused by fetches at the boundary of reserved memory */ +#define ANOMALY_05000310 (1) +/* Errors when SSYNC, CSYNC, or loads to LT, LB and LC registers are interrupted */ +#define ANOMALY_05000312 (1) +/* PPI is level sensitive on first transfer */ +#define ANOMALY_05000313 (1) +/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +#define ANOMALY_05000315 (__SILICON_REVISION__ < 3) +/* EMAC RMII mode: collisions occur in Full Duplex mode */ +#define ANOMALY_05000316 (__SILICON_REVISION__ < 3) +/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */ +#define ANOMALY_05000321 (__SILICON_REVISION__ < 3) +/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */ +#define ANOMALY_05000322 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000125 (0) +#define ANOMALY_05000158 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000323 (0) + +#endif diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/include/asm-blackfin/mach-bf537/bf537.h index b8924cd7730..cfe2a221112 100644 --- a/include/asm-blackfin/mach-bf537/bf537.h +++ b/include/asm-blackfin/mach-bf537/bf537.h @@ -62,12 +62,12 @@ /***************************/ -#define BLKFIN_DSUBBANKS 4 -#define BLKFIN_DWAYS 2 -#define BLKFIN_DLINES 64 -#define BLKFIN_ISUBBANKS 4 -#define BLKFIN_IWAYS 4 -#define BLKFIN_ILINES 32 +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 #define WAY0_L 0x1 #define WAY1_L 0x2 @@ -121,97 +121,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) -#define MAX_VC 650000000 -#define MIN_VC 50000000 - -/********************************PLL Settings **************************************/ -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#if (CONFIG_VCO_MULT < 0) -#error "VCO Multiplier is less than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT == 0) -#error "VCO Multiplier should be greater than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT > 64) -#error "VCO Multiplier is more than 64. Please select a different value" -#endif - -#ifndef CONFIG_CLKIN_HALF -#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -#else -#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) -#endif - -#ifndef CONFIG_PLL_BYPASS -#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) -#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#if (CONFIG_SCLK_DIV < 1) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_SCLK_DIV > 15) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_CCLK_DIV != 1) -#if (CONFIG_CCLK_DIV != 2) -#if (CONFIG_CCLK_DIV != 4) -#if (CONFIG_CCLK_DIV != 8) -#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" -#endif -#endif -#endif -#endif - -#if (CONFIG_VCO_HZ > MAX_VC) -#error "VCO selected is more than maximum value. Please change the VCO multipler" -#endif - -#if (CONFIG_SCLK_HZ > 133000000) -#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ < 27000000) -#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) -#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) -#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) -#error "Please select sclk less than cclk" -#endif -#endif -#endif - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1) -#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK -#endif - -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ - #ifdef CONFIG_BF537 #define CPU "BF537" #define CPUID 0x027c8000 @@ -229,59 +138,4 @@ #define CPUID 0x0 #endif -#if (CONFIG_MEM_SIZE % 4) -#error "SDRAM mem size must be multible of 4MB" -#endif - -#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) -#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) -#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158_WORKAROUND 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#else /*Write Through */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) -#endif - - -#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) -#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) -#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) -#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) - -#define SIZE_1K 0x00000400 /* 1K */ -#define SIZE_4K 0x00001000 /* 4K */ -#define SIZE_1M 0x00100000 /* 1M */ -#define SIZE_4M 0x00400000 /* 4M */ - -#define MAX_CPLBS (16 * 2) - -/* -* Number of required data CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 16 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Data Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -* 1 for ASYNC Memory -*/ - - -#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2) - -/* -* Number of required instruction CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 12 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Instruction Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -*/ - -#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2) - #endif /* __MACH_BF537_H__ */ diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h index bbd97051ec9..53fcfa3408d 100644 --- a/include/asm-blackfin/mach-bf537/blackfin.h +++ b/include/asm-blackfin/mach-bf537/blackfin.h @@ -43,7 +43,7 @@ #include "defBF537.h" #endif -#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY)) +#if !defined(__ASSEMBLY__) #include "cdefBF534.h" /* UART 0*/ @@ -143,284 +143,6 @@ #define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val) #define STOPCK_OFF STOPCK -/* FIO USE PORT F*/ -#ifdef CONFIG_BF537_PORT_F -#define bfin_read_PORT_FER() bfin_read_PORTF_FER() -#define bfin_write_PORT_FER(val) bfin_write_PORTF_FER(val) -#define bfin_read_FIO_FLAG_D() bfin_read_PORTFIO() -#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTFIO(val) -#define bfin_read_FIO_FLAG_C() bfin_read_PORTFIO_CLEAR() -#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTFIO_CLEAR(val) -#define bfin_read_FIO_FLAG_S() bfin_read_PORTFIO_SET() -#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTFIO_SET(val) -#define bfin_read_FIO_FLAG_T() bfin_read_PORTFIO_TOGGLE() -#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTFIO_TOGGLE(val) -#define bfin_read_FIO_MASKA_D() bfin_read_PORTFIO_MASKA() -#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTFIO_MASKA(val) -#define bfin_read_FIO_MASKA_C() bfin_read_PORTFIO_MASKA_CLEAR() -#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTFIO_MASKA_CLEAR(val) -#define bfin_read_FIO_MASKA_S() bfin_read_PORTFIO_MASKA_SET() -#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTFIO_MASKA_SET(val) -#define bfin_read_FIO_MASKA_T() bfin_read_PORTFIO_MASKA_TOGGLE() -#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTFIO_MASKA_TOGGLE(val) -#define bfin_read_FIO_MASKB_D() bfin_read_PORTFIO_MASKB() -#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTFIO_MASKB(val) -#define bfin_read_FIO_MASKB_C() bfin_read_PORTFIO_MASKB_CLEAR() -#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTFIO_MASKB_CLEAR(val) -#define bfin_read_FIO_MASKB_S() bfin_read_PORTFIO_MASKB_SET() -#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTFIO_MASKB_SET(val) -#define bfin_read_FIO_MASKB_T() bfin_read_PORTFIO_MASKB_TOGGLE() -#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTFIO_MASKB_TOGGLE(val) -#define bfin_read_FIO_DIR() bfin_read_PORTFIO_DIR() -#define bfin_write_FIO_DIR(val) bfin_write_PORTFIO_DIR(val) -#define bfin_read_FIO_POLAR() bfin_read_PORTFIO_POLAR() -#define bfin_write_FIO_POLAR(val) bfin_write_PORTFIO_POLAR(val) -#define bfin_read_FIO_EDGE() bfin_read_PORTFIO_EDGE() -#define bfin_write_FIO_EDGE(val) bfin_write_PORTFIO_EDGE(val) -#define bfin_read_FIO_BOTH() bfin_read_PORTFIO_BOTH() -#define bfin_write_FIO_BOTH(val) bfin_write_PORTFIO_BOTH(val) -#define bfin_read_FIO_INEN() bfin_read_PORTFIO_INEN() -#define bfin_write_FIO_INEN(val) bfin_write_PORTFIO_INEN(val) - -#define bfin_read_FIO_FLAG_D() bfin_read_PORTFIO() -#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTFIO(val) -#define FIO_FLAG_D PORTFIO -#define bfin_read_FIO_FLAG_C() bfin_read_PORTFIO_CLEAR() -#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTFIO_CLEAR(val) -#define FIO_FLAG_C PORTFIO_CLEAR -#define bfin_read_FIO_FLAG_S() bfin_read_PORTFIO_SET() -#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTFIO_SET(val) -#define FIO_FLAG_S PORTFIO_SET -#define bfin_read_FIO_FLAG_T() bfin_read_PORTFIO_TOGGLE() -#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTFIO_TOGGLE(val) -#define FIO_FLAG_T PORTFIO_TOGGLE -#define bfin_read_FIO_MASKA_D() bfin_read_PORTFIO_MASKA() -#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTFIO_MASKA(val) -#define FIO_MASKA_D PORTFIO_MASKA -#define bfin_read_FIO_MASKA_C() bfin_read_PORTFIO_MASKA_CLEAR() -#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTFIO_MASKA_CLEAR(val) -#define FIO_MASKA_C PORTFIO_MASKA_CLEAR -#define bfin_read_FIO_MASKA_S() bfin_read_PORTFIO_MASKA_SET() -#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTFIO_MASKA_SET(val) -#define FIO_MASKA_S PORTFIO_MASKA_SET -#define bfin_read_FIO_MASKA_T() bfin_read_PORTFIO_MASKA_TOGGLE() -#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTFIO_MASKA_TOGGLE(val) -#define FIO_MASKA_T PORTFIO_MASKA_TOGGLE -#define bfin_read_FIO_MASKB_D() bfin_read_PORTFIO_MASKB() -#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTFIO_MASKB(val) -#define FIO_MASKB_D PORTFIO_MASKB -#define bfin_read_FIO_MASKB_C() bfin_read_PORTFIO_MASKB_CLEAR() -#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTFIO_MASKB_CLEAR(val) -#define FIO_MASKB_C PORTFIO_MASKB_CLEAR -#define bfin_read_FIO_MASKB_S() bfin_read_PORTFIO_MASKB_SET() -#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTFIO_MASKB_SET(val) -#define FIO_MASKB_S PORTFIO_MASKB_SET -#define bfin_read_FIO_MASKB_T() bfin_read_PORTFIO_MASKB_TOGGLE() -#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTFIO_MASKB_TOGGLE(val) -#define FIO_MASKB_T PORTFIO_MASKB_TOGGLE -#define bfin_read_FIO_DIR() bfin_read_PORTFIO_DIR() -#define bfin_write_FIO_DIR(val) bfin_write_PORTFIO_DIR(val) -#define FIO_DIR PORTFIO_DIR -#define bfin_read_FIO_POLAR() bfin_read_PORTFIO_POLAR() -#define bfin_write_FIO_POLAR(val) bfin_write_PORTFIO_POLAR(val) -#define FIO_POLAR PORTFIO_POLAR -#define bfin_read_FIO_EDGE() bfin_read_PORTFIO_EDGE() -#define bfin_write_FIO_EDGE(val) bfin_write_PORTFIO_EDGE(val) -#define FIO_EDGE PORTFIO_EDGE -#define bfin_read_FIO_BOTH() bfin_read_PORTFIO_BOTH() -#define bfin_write_FIO_BOTH(val) bfin_write_PORTFIO_BOTH(val) -#define FIO_BOTH PORTFIO_BOTH -#define bfin_read_FIO_INEN() bfin_read_PORTFIO_INEN() -#define bfin_write_FIO_INEN(val) bfin_write_PORTFIO_INEN(val) -#define FIO_INEN PORTFIO_INEN -#endif - -/* FIO USE PORT G*/ -#ifdef CONFIG_BF537_PORT_G -#define bfin_read_PORT_FER() bfin_read_PORTG_FER() -#define bfin_write_PORT_FER(val) bfin_write_PORTG_FER(val) -#define bfin_read_FIO_FLAG_D() bfin_read_PORTGIO() -#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTGIO(val) -#define bfin_read_FIO_FLAG_C() bfin_read_PORTGIO_CLEAR() -#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTGIO_CLEAR(val) -#define bfin_read_FIO_FLAG_S() bfin_read_PORTGIO_SET() -#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTGIO_SET(val) -#define bfin_read_FIO_FLAG_T() bfin_read_PORTGIO_TOGGLE() -#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTGIO_TOGGLE(val) -#define bfin_read_FIO_MASKA_D() bfin_read_PORTGIO_MASKA() -#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTGIO_MASKA(val) -#define bfin_read_FIO_MASKA_C() bfin_read_PORTGIO_MASKA_CLEAR() -#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTGIO_MASKA_CLEAR(val) -#define bfin_read_FIO_MASKA_S() bfin_read_PORTGIO_MASKA_SET() -#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTGIO_MASKA_SET(val) -#define bfin_read_FIO_MASKA_T() bfin_read_PORTGIO_MASKA_TOGGLE() -#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTGIO_MASKA_TOGGLE(val) -#define bfin_read_FIO_MASKB_D() bfin_read_PORTGIO_MASKB() -#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTGIO_MASKB(val) -#define bfin_read_FIO_MASKB_C() bfin_read_PORTGIO_MASKB_CLEAR() -#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTGIO_MASKB_CLEAR(val) -#define bfin_read_FIO_MASKB_S() bfin_read_PORTGIO_MASKB_SET() -#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTGIO_MASKB_SET(val) -#define bfin_read_FIO_MASKB_T() bfin_read_PORTGIO_MASKB_TOGGLE() -#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTGIO_MASKB_TOGGLE(val) -#define bfin_read_FIO_DIR() bfin_read_PORTGIO_DIR() -#define bfin_write_FIO_DIR(val) bfin_write_PORTGIO_DIR(val) -#define bfin_read_FIO_POLAR() bfin_read_PORTGIO_POLAR() -#define bfin_write_FIO_POLAR(val) bfin_write_PORTGIO_POLAR(val) -#define bfin_read_FIO_EDGE() bfin_read_PORTGIO_EDGE() -#define bfin_write_FIO_EDGE(val) bfin_write_PORTGIO_EDGE(val) -#define bfin_read_FIO_BOTH() bfin_read_PORTGIO_BOTH() -#define bfin_write_FIO_BOTH(val) bfin_write_PORTGIO_BOTH(val) -#define bfin_read_FIO_INEN() bfin_read_PORTGIO_INEN() -#define bfin_write_FIO_INEN(val) bfin_write_PORTGIO_INEN(val) - -#define bfin_read_FIO_FLAG_D() bfin_read_PORTGIO() -#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTGIO(val) -#define FIO_FLAG_D PORTGIO -#define bfin_read_FIO_FLAG_C() bfin_read_PORTGIO_CLEAR() -#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTGIO_CLEAR(val) -#define FIO_FLAG_C PORTGIO_CLEAR -#define bfin_read_FIO_FLAG_S() bfin_read_PORTGIO_SET() -#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTGIO_SET(val) -#define FIO_FLAG_S PORTGIO_SET -#define bfin_read_FIO_FLAG_T() bfin_read_PORTGIO_TOGGLE() -#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTGIO_TOGGLE(val) -#define FIO_FLAG_T PORTGIO_TOGGLE -#define bfin_read_FIO_MASKA_D() bfin_read_PORTGIO_MASKA() -#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTGIO_MASKA(val) -#define FIO_MASKA_D PORTGIO_MASKA -#define bfin_read_FIO_MASKA_C() bfin_read_PORTGIO_MASKA_CLEAR() -#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTGIO_MASKA_CLEAR(val) -#define FIO_MASKA_C PORTGIO_MASKA_CLEAR -#define bfin_read_FIO_MASKA_S() bfin_read_PORTGIO_MASKA_SET() -#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTGIO_MASKA_SET(val) -#define FIO_MASKA_S PORTGIO_MASKA_SET -#define bfin_read_FIO_MASKA_T() bfin_read_PORTGIO_MASKA_TOGGLE() -#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTGIO_MASKA_TOGGLE(val) -#define FIO_MASKA_T PORTGIO_MASKA_TOGGLE -#define bfin_read_FIO_MASKB_D() bfin_read_PORTGIO_MASKB() -#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTGIO_MASKB(val) -#define FIO_MASKB_D PORTGIO_MASKB -#define bfin_read_FIO_MASKB_C() bfin_read_PORTGIO_MASKB_CLEAR() -#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTGIO_MASKB_CLEAR(val) -#define FIO_MASKB_C PORTGIO_MASKB_CLEAR -#define bfin_read_FIO_MASKB_S() bfin_read_PORTGIO_MASKB_SET() -#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTGIO_MASKB_SET(val) -#define FIO_MASKB_S PORTGIO_MASKB_SET -#define bfin_read_FIO_MASKB_T() bfin_read_PORTGIO_MASKB_TOGGLE() -#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTGIO_MASKB_TOGGLE(val) -#define FIO_MASKB_T PORTGIO_MASKB_TOGGLE -#define bfin_read_FIO_DIR() bfin_read_PORTGIO_DIR() -#define bfin_write_FIO_DIR(val) bfin_write_PORTGIO_DIR(val) -#define FIO_DIR PORTGIO_DIR -#define bfin_read_FIO_POLAR() bfin_read_PORTGIO_POLAR() -#define bfin_write_FIO_POLAR(val) bfin_write_PORTGIO_POLAR(val) -#define FIO_POLAR PORTGIO_POLAR -#define bfin_read_FIO_EDGE() bfin_read_PORTGIO_EDGE() -#define bfin_write_FIO_EDGE(val) bfin_write_PORTGIO_EDGE(val) -#define FIO_EDGE PORTGIO_EDGE -#define bfin_read_FIO_BOTH() bfin_read_PORTGIO_BOTH() -#define bfin_write_FIO_BOTH(val) bfin_write_PORTGIO_BOTH(val) -#define FIO_BOTH PORTGIO_BOTH -#define bfin_read_FIO_INEN() bfin_read_PORTGIO_INEN() -#define bfin_write_FIO_INEN(val) bfin_write_PORTGIO_INEN(val) -#define FIO_INEN PORTGIO_INEN - -#endif - -/* FIO USE PORT H*/ -#ifdef CONFIG_BF537_PORT_H -#define bfin_read_PORT_FER() bfin_read_PORTH_FER() -#define bfin_write_PORT_FER(val) bfin_write_PORTH_FER(val) -#define bfin_read_FIO_FLAG_D() bfin_read_PORTHIO() -#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTHIO(val) -#define bfin_read_FIO_FLAG_C() bfin_read_PORTHIO_CLEAR() -#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTHIO_CLEAR(val) -#define bfin_read_FIO_FLAG_S() bfin_read_PORTHIO_SET() -#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTHIO_SET(val) -#define bfin_read_FIO_FLAG_T() bfin_read_PORTHIO_TOGGLE() -#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTHIO_TOGGLE(val) -#define bfin_read_FIO_MASKA_D() bfin_read_PORTHIO_MASKA() -#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTHIO_MASKA(val) -#define bfin_read_FIO_MASKA_C() bfin_read_PORTHIO_MASKA_CLEAR() -#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTHIO_MASKA_CLEAR(val) -#define bfin_read_FIO_MASKA_S() bfin_read_PORTHIO_MASKA_SET() -#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTHIO_MASKA_SET(val) -#define bfin_read_FIO_MASKA_T() bfin_read_PORTHIO_MASKA_TOGGLE() -#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTHIO_MASKA_TOGGLE(val) -#define bfin_read_FIO_MASKB_D() bfin_read_PORTHIO_MASKB() -#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTHIO_MASKB(val) -#define bfin_read_FIO_MASKB_C() bfin_read_PORTHIO_MASKB_CLEAR() -#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTHIO_MASKB_CLEAR(val) -#define bfin_read_FIO_MASKB_S() bfin_read_PORTHIO_MASKB_SET() -#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTHIO_MASKB_SET(val) -#define bfin_read_FIO_MASKB_T() bfin_read_PORTHIO_MASKB_TOGGLE() -#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTHIO_MASKB_TOGGLE(val) -#define bfin_read_FIO_DIR() bfin_read_PORTHIO_DIR() -#define bfin_write_FIO_DIR(val) bfin_write_PORTHIO_DIR(val) -#define bfin_read_FIO_POLAR() bfin_read_PORTHIO_POLAR() -#define bfin_write_FIO_POLAR(val) bfin_write_PORTHIO_POLAR(val) -#define bfin_read_FIO_EDGE() bfin_read_PORTHIO_EDGE() -#define bfin_write_FIO_EDGE(val) bfin_write_PORTHIO_EDGE(val) -#define bfin_read_FIO_BOTH() bfin_read_PORTHIO_BOTH() -#define bfin_write_FIO_BOTH(val) bfin_write_PORTHIO_BOTH(val) -#define bfin_read_FIO_INEN() bfin_read_PORTHIO_INEN() -#define bfin_write_FIO_INEN(val) bfin_write_PORTHIO_INEN(val) - -#define bfin_read_FIO_FLAG_D() bfin_read_PORTHIO() -#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTHIO(val) -#define FIO_FLAG_D PORTHIO -#define bfin_read_FIO_FLAG_C() bfin_read_PORTHIO_CLEAR() -#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTHIO_CLEAR(val) -#define FIO_FLAG_C PORTHIO_CLEAR -#define bfin_read_FIO_FLAG_S() bfin_read_PORTHIO_SET() -#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTHIO_SET(val) -#define FIO_FLAG_S PORTHIO_SET -#define bfin_read_FIO_FLAG_T() bfin_read_PORTHIO_TOGGLE() -#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTHIO_TOGGLE(val) -#define FIO_FLAG_T PORTHIO_TOGGLE -#define bfin_read_FIO_MASKA_D() bfin_read_PORTHIO_MASKA() -#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTHIO_MASKA(val) -#define FIO_MASKA_D PORTHIO_MASKA -#define bfin_read_FIO_MASKA_C() bfin_read_PORTHIO_MASKA_CLEAR() -#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTHIO_MASKA_CLEAR(val) -#define FIO_MASKA_C PORTHIO_MASKA_CLEAR -#define bfin_read_FIO_MASKA_S() bfin_read_PORTHIO_MASKA_SET() -#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTHIO_MASKA_SET(val) -#define FIO_MASKA_S PORTHIO_MASKA_SET -#define bfin_read_FIO_MASKA_T() bfin_read_PORTHIO_MASKA_TOGGLE() -#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTHIO_MASKA_TOGGLE(val) -#define FIO_MASKA_T PORTHIO_MASKA_TOGGLE -#define bfin_read_FIO_MASKB_D() bfin_read_PORTHIO_MASKB() -#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTHIO_MASKB(val) -#define FIO_MASKB_D PORTHIO_MASKB -#define bfin_read_FIO_MASKB_C() bfin_read_PORTHIO_MASKB_CLEAR() -#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTHIO_MASKB_CLEAR(val) -#define FIO_MASKB_C PORTHIO_MASKB_CLEAR -#define bfin_read_FIO_MASKB_S() bfin_read_PORTHIO_MASKB_SET() -#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTHIO_MASKB_SET(val) -#define FIO_MASKB_S PORTHIO_MASKB_SET -#define bfin_read_FIO_MASKB_T() bfin_read_PORTHIO_MASKB_TOGGLE() -#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTHIO_MASKB_TOGGLE(val) -#define FIO_MASKB_T PORTHIO_MASKB_TOGGLE -#define bfin_read_FIO_DIR() bfin_read_PORTHIO_DIR() -#define bfin_write_FIO_DIR(val) bfin_write_PORTHIO_DIR(val) -#define FIO_DIR PORTHIO_DIR -#define bfin_read_FIO_POLAR() bfin_read_PORTHIO_POLAR() -#define bfin_write_FIO_POLAR(val) bfin_write_PORTHIO_POLAR(val) -#define FIO_POLAR PORTHIO_POLAR -#define bfin_read_FIO_EDGE() bfin_read_PORTHIO_EDGE() -#define bfin_write_FIO_EDGE(val) bfin_write_PORTHIO_EDGE(val) -#define FIO_EDGE PORTHIO_EDGE -#define bfin_read_FIO_BOTH() bfin_read_PORTHIO_BOTH() -#define bfin_write_FIO_BOTH(val) bfin_write_PORTHIO_BOTH(val) -#define FIO_BOTH PORTHIO_BOTH -#define bfin_read_FIO_INEN() bfin_read_PORTHIO_INEN() -#define bfin_write_FIO_INEN(val) bfin_write_PORTHIO_INEN(val) -#define FIO_INEN PORTHIO_INEN - -#endif - /* PLL_DIV Masks */ #define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ #define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/include/asm-blackfin/mach-bf537/cdefBF534.h index 84e58fa73dc..78227bc855d 100644 --- a/include/asm-blackfin/mach-bf537/cdefBF534.h +++ b/include/asm-blackfin/mach-bf537/cdefBF534.h @@ -32,6 +32,8 @@ #ifndef _CDEF_BF534_H #define _CDEF_BF534_H +#include <asm/blackfin.h> + /* Include all Core registers and bit definitions */ #include "defBF534.h" @@ -57,7 +59,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write32(SIC_IWR, IWR_ENABLE(0)); bfin_write16(VR_CTL, val); - __builtin_bfin_ssync(); + SSYNC(); local_irq_save(flags); asm("IDLE;"); diff --git a/include/asm-blackfin/mach-bf537/defBF534.h b/include/asm-blackfin/mach-bf537/defBF534.h index 1859f2fee5a..d0d80d3152b 100644 --- a/include/asm-blackfin/mach-bf537/defBF534.h +++ b/include/asm-blackfin/mach-bf537/defBF534.h @@ -86,6 +86,7 @@ #define UART0_GCTL 0xFFC00424 /* Global Control Register */ /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI0_REGBASE 0xFFC00500 #define SPI_CTL 0xFFC00500 /* SPI Control Register */ #define SPI_FLG 0xFFC00504 /* SPI Flag register */ #define SPI_STAT 0xFFC00508 /* SPI Status register */ @@ -456,6 +457,7 @@ #define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define TWI0_REGBASE 0xFFC01400 #define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ #define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ #define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ @@ -1165,7 +1167,7 @@ #define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ #define PSSE 0x0010 /* Slave-Select Input Enable */ #define EMISO 0x0020 /* Enable MISO As Output */ -#define SPI_SIZE 0x0100 /* Size of Words (16/8* Bits) */ +#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ #define LSBF 0x0200 /* LSB First */ #define CPHA 0x0400 /* Clock Phase */ #define CPOL 0x0800 /* Clock Polarity */ diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h index 8af2a832ef6..36c44bc1a91 100644 --- a/include/asm-blackfin/mach-bf537/irq.h +++ b/include/asm-blackfin/mach-bf537/irq.h @@ -160,6 +160,8 @@ Core Emulation ** #define IRQ_PH14 96 #define IRQ_PH15 97 +#define GPIO_IRQ_BASE IRQ_PF0 + #ifdef CONFIG_IRQCHIP_DEMUX_GPIO #define NR_IRQS (IRQ_PH15+1) #else diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/include/asm-blackfin/mach-bf537/mem_map.h index 2a808c1202b..18759e38eaa 100644 --- a/include/asm-blackfin/mach-bf537/mem_map.h +++ b/include/asm-blackfin/mach-bf537/mem_map.h @@ -52,10 +52,10 @@ /* Memory Map for ADSP-BF537 processors */ -#ifdef CONFIG_BLKFIN_CACHE -#define BLKFIN_ICACHESIZE (16*1024) +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) #else -#define BLKFIN_ICACHESIZE (0*1024) +#define BFIN_ICACHESIZE (0*1024) #endif @@ -66,29 +66,29 @@ #define L1_CODE_LENGTH 0xC000 -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH (0x8000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x8000 #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ #endif /*CONFIG_BF537*/ @@ -102,30 +102,30 @@ #define L1_CODE_LENGTH 0xC000 -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x4000 - 0x4000) #define L1_DATA_B_LENGTH 0x4000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x4000 - 0x4000) #define L1_DATA_B_LENGTH (0x4000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x4000 #define L1_DATA_B_LENGTH 0x4000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ #endif @@ -138,30 +138,30 @@ #define L1_CODE_LENGTH 0xC000 -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH (0x8000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x8000 #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ #endif diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/include/asm-blackfin/mach-bf537/portmux.h index ae6c53b2845..5a3f7d3bf73 100644 --- a/include/asm-blackfin/mach-bf537/portmux.h +++ b/include/asm-blackfin/mach-bf537/portmux.h @@ -99,7 +99,7 @@ #define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(PORT_PJ8) | P_FUNCT(0)) #define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(PORT_PJ9) | P_FUNCT(0)) #define P_SPORT0_TFS (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(0)) -#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1)) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(0)) #define P_CAN0_RX (P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(1)) #define P_CAN0_TX (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(1)) #define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(1)) diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h index aca1d4ba145..c5b63759cde 100644 --- a/include/asm-blackfin/mach-bf548/anomaly.h +++ b/include/asm-blackfin/mach-bf548/anomaly.h @@ -1,74 +1,85 @@ - /* - * File: include/asm-blackfin/mach-bf548/anomaly.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * File: include/asm-blackfin/mach-bf548/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Copyright (C) 2004-2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* This file shoule be up to date with: + * - Revision C, July 16, 2007; ADSP-BF549 Silicon Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ -#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in - slot1 and store of a P register in slot 2 is not - supported */ -#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive - Channel DMA stops */ -#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR - registers. */ -#define ANOMALY_05000245 /* Spurious Hardware Error from an Access in the - Shadow of a Conditional Branch */ -#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event - interrupt not functional */ -#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on - SPORT external receive and transmit clocks. */ -#define ANOMALY_05000272 /* Certain data cache write through modes fail for - VDDint <=0.9V */ -#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is - not restored */ -#define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the - Boundary of Reserved Memory */ -#define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and - LC Registers Are Interrupted */ -#define ANOMALY_05000324 /* TWI Slave Boot Mode Is Not Functional */ -#define ANOMALY_05000325 /* External FIFO Boot Mode Is Not Functional */ -#define ANOMALY_05000327 /* Data Lost When Core and DMA Accesses Are Made to - the USB FIFO Simultaneously */ -#define ANOMALY_05000328 /* Incorrect Access of OTP_STATUS During otp_write() - function */ -#define ANOMALY_05000329 /* Synchronous Burst Flash Boot Mode Is Not Functional - */ -#define ANOMALY_05000330 /* Host DMA Boot Mode Is Not Functional */ -#define ANOMALY_05000334 /* Inadequate Timing Margins on DDR DQS to DQ and DQM - Skew */ -#define ANOMALY_05000335 /* Inadequate Rotary Debounce Logic Duration */ -#define ANOMALY_05000336 /* Phantom Interrupt Occurs After First Configuration - of Host DMA Port */ -#define ANOMALY_05000337 /* Disallowed Configuration Prevents Subsequent - Allowed Configuration on Host DMA Port */ -#define ANOMALY_05000338 /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */ -#endif /* _MACH_ANOMALY_H_ */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (1) +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ +#define ANOMALY_05000272 (1) +/* False Hardware Error Exception when ISR context is not restored */ +#define ANOMALY_05000281 (1) +/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ +#define ANOMALY_05000304 (1) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* TWI Slave Boot Mode Is Not Functional */ +#define ANOMALY_05000324 (1) +/* External FIFO Boot Mode Is Not Functional */ +#define ANOMALY_05000325 (1) +/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */ +#define ANOMALY_05000327 (1) +/* Incorrect Access of OTP_STATUS During otp_write() Function */ +#define ANOMALY_05000328 (1) +/* Synchronous Burst Flash Boot Mode Is Not Functional */ +#define ANOMALY_05000329 (1) +/* Host DMA Boot Mode Is Not Functional */ +#define ANOMALY_05000330 (1) +/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */ +#define ANOMALY_05000334 (1) +/* Inadequate Rotary Debounce Logic Duration */ +#define ANOMALY_05000335 (1) +/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */ +#define ANOMALY_05000336 (1) +/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ +#define ANOMALY_05000337 (1) +/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */ +#define ANOMALY_05000338 (1) +/* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */ +#define ANOMALY_05000340 (1) +/* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */ +#define ANOMALY_05000344 (1) +/* USB Calibration Value Is Not Intialized */ +#define ANOMALY_05000346 (1) +/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */ +#define ANOMALY_05000347 (1) +/* Data Lost when Core Reads SDH Data FIFO */ +#define ANOMALY_05000349 (1) +/* PLL Status Register Is Inaccurate */ +#define ANOMALY_05000351 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000125 (0) +#define ANOMALY_05000158 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000261 (0) +#define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000323 (0) + +#endif diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/include/asm-blackfin/mach-bf548/bf548.h index 9498313a2cb..7e6d349beb0 100644 --- a/include/asm-blackfin/mach-bf548/bf548.h +++ b/include/asm-blackfin/mach-bf548/bf548.h @@ -52,12 +52,12 @@ /***************************/ -#define BLKFIN_DSUBBANKS 4 -#define BLKFIN_DWAYS 2 -#define BLKFIN_DLINES 64 -#define BLKFIN_ISUBBANKS 4 -#define BLKFIN_IWAYS 4 -#define BLKFIN_ILINES 32 +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 #define WAY0_L 0x1 #define WAY1_L 0x2 @@ -106,93 +106,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN) -#define MAX_VC 650000000 -#define MIN_VC 50000000 - -/********************************PLL Settings **************************************/ -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#if (CONFIG_VCO_MULT < 0) -#error "VCO Multiplier is less than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT == 0) -#error "VCO Multiplier should be greater than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT > 64) -#error "VCO Multiplier is more than 64. Please select a different value" -#endif - -#ifndef CONFIG_CLKIN_HALF -#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -#else -#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) -#endif - -#ifndef CONFIG_PLL_BYPASS -#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) -#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#if (CONFIG_SCLK_DIV < 1) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_SCLK_DIV > 15) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_CCLK_DIV != 1) -#if (CONFIG_CCLK_DIV != 2) -#if (CONFIG_CCLK_DIV != 4) -#if (CONFIG_CCLK_DIV != 8) -#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" -#endif -#endif -#endif -#endif - -#if (CONFIG_VCO_HZ > MAX_VC) -#error "VCO selected is more than maximum value. Please change the VCO multipler" -#endif - -#if (CONFIG_SCLK_HZ > 133000000) -#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ < 27000000) -#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) -#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) -#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) -#error "Please select sclk less than cclk" -#endif -#endif -#endif - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ - #ifdef CONFIG_BF542 #define CPU "BF542" #define CPUID 0x027c8000 @@ -213,59 +126,4 @@ #define CPUID 0x0 #endif -#if (CONFIG_MEM_SIZE % 4) -#error "SDRAM mem size must be multible of 4MB" -#endif - -#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) -#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) -#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158_WORKAROUND 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#else /*Write Through */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) -#endif - - -#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) -#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) -#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) -#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) - -#define SIZE_1K 0x00000400 /* 1K */ -#define SIZE_4K 0x00001000 /* 4K */ -#define SIZE_1M 0x00100000 /* 1M */ -#define SIZE_4M 0x00400000 /* 4M */ - -#define MAX_CPLBS (16 * 2) - -/* -* Number of required data CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 16 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Data Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -* 1 for ASYNC Memory -*/ - - -#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2) - -/* -* Number of required instruction CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 12 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Instruction Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -*/ - -#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2) - #endif /* __MACH_BF48_H__ */ diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 2f4afc90db1..f21a1620e6b 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -1,5 +1,6 @@ #include <linux/serial.h> #include <asm/dma.h> +#include <asm/portmux.h> #define NR_PORTS 4 @@ -143,50 +144,48 @@ struct bfin_serial_res bfin_serial_resource[] = { int nr_ports = ARRAY_SIZE(bfin_serial_resource); +#define DRIVER_NAME "bfin-uart" + static void bfin_serial_hw_init(struct bfin_serial_port *uart) { #ifdef CONFIG_SERIAL_BFIN_UART0 - /* Enable UART0 RX and TX on pin 7 & 8 of PORT E */ - bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER()); - bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX()); + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); #endif #ifdef CONFIG_SERIAL_BFIN_UART1 - /* Enable UART1 RX and TX on pin 0 & 1 of PORT H */ - bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER()); - bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX()); + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); + #ifdef CONFIG_BFIN_UART1_CTSRTS - /* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */ - bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER()); - bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX()); + peripheral_request(P_UART1_RTS, DRIVER_NAME); + peripheral_request(P_UART1_CTS DRIVER_NAME); #endif #endif #ifdef CONFIG_SERIAL_BFIN_UART2 - /* Enable UART2 RX and TX on pin 4 & 5 of PORT B */ - bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER()); - bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX()); + peripheral_request(P_UART2_TX, DRIVER_NAME); + peripheral_request(P_UART2_RX, DRIVER_NAME); #endif #ifdef CONFIG_SERIAL_BFIN_UART3 - /* Enable UART3 RX and TX on pin 6 & 7 of PORT B */ - bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER()); - bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX()); + peripheral_request(P_UART3_TX, DRIVER_NAME); + peripheral_request(P_UART3_RX, DRIVER_NAME); + #ifdef CONFIG_BFIN_UART3_CTSRTS - /* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */ - bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER()); - bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX()); + peripheral_request(P_UART3_RTS, DRIVER_NAME); + peripheral_request(P_UART3_CTS DRIVER_NAME); #endif #endif SSYNC(); #ifdef CONFIG_SERIAL_BFIN_CTSRTS if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, NULL); + gpio_request(uart->cts_pin, DRIVER_NAME); gpio_direction_input(uart->cts_pin); } if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, NULL); + gpio_request(uart->rts_pin, DRIVER_NAME); gpio_direction_output(uart->rts_pin); } #endif diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h index 791218fe7d9..19e84dd4c99 100644 --- a/include/asm-blackfin/mach-bf548/blackfin.h +++ b/include/asm-blackfin/mach-bf548/blackfin.h @@ -54,7 +54,7 @@ #include "defBF549.h" #endif -#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY)) +#if !defined(__ASSEMBLY__) #ifdef CONFIG_BF542 #include "cdefBF542.h" #endif diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h index cdf29e75ea5..aefab3f618c 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h @@ -31,6 +31,8 @@ #ifndef _CDEF_BF54X_H #define _CDEF_BF54X_H +#include <asm/blackfin.h> + #include "defBF54x_base.h" #include <asm/system.h> @@ -60,7 +62,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write32(SIC_IWR2, 0); bfin_write16(VR_CTL, val); - __builtin_bfin_ssync(); + SSYNC(); local_irq_save(flags); asm("IDLE;"); diff --git a/include/asm-blackfin/mach-bf548/defBF544.h b/include/asm-blackfin/mach-bf548/defBF544.h index dd955dcd39b..760307e34b9 100644 --- a/include/asm-blackfin/mach-bf548/defBF544.h +++ b/include/asm-blackfin/mach-bf548/defBF544.h @@ -81,6 +81,7 @@ /* Two Wire Interface Registers (TWI1) */ +#define TWI1_REGBASE 0xffc02200 #define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ #define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ #define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h index 8d4214e0807..70af33c963b 100644 --- a/include/asm-blackfin/mach-bf548/defBF548.h +++ b/include/asm-blackfin/mach-bf548/defBF548.h @@ -120,6 +120,7 @@ /* Two Wire Interface Registers (TWI1) */ +#define TWI1_REGBASE 0xffc02200 #define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ #define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ #define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ @@ -139,6 +140,7 @@ /* SPI2 Registers */ +#define SPI2_REGBASE 0xffc02400 #define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ #define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ #define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/include/asm-blackfin/mach-bf548/defBF549.h index c2f4734da48..50b3fe55ef0 100644 --- a/include/asm-blackfin/mach-bf548/defBF549.h +++ b/include/asm-blackfin/mach-bf548/defBF549.h @@ -121,6 +121,7 @@ /* Two Wire Interface Registers (TWI1) */ +#define TWI1_REGBASE 0xffc02200 #define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ #define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ #define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ @@ -140,6 +141,7 @@ /* SPI2 Registers */ +#define SPI2_REGBASE 0xffc02400 #define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ #define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ #define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h index 895ddd40a83..e2632db74ba 100644 --- a/include/asm-blackfin/mach-bf548/defBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h @@ -109,6 +109,7 @@ /* SPI0 Registers */ +#define SPI0_REGBASE 0xffc00500 #define SPI0_CTL 0xffc00500 /* SPI0 Control Register */ #define SPI0_FLG 0xffc00504 /* SPI0 Flag Register */ #define SPI0_STAT 0xffc00508 /* SPI0 Status Register */ @@ -121,6 +122,7 @@ /* Two Wire Interface Registers (TWI0) */ +#define TWI0_REGBASE 0xffc00700 #define TWI0_CLKDIV 0xffc00700 /* Clock Divider Register */ #define TWI0_CONTROL 0xffc00704 /* TWI Control Register */ #define TWI0_SLAVE_CTRL 0xffc00708 /* TWI Slave Mode Control Register */ @@ -978,6 +980,7 @@ /* SPI1 Registers */ +#define SPI1_REGBASE 0xffc02300 #define SPI1_CTL 0xffc02300 /* SPI1 Control Register */ #define SPI1_FLG 0xffc02304 /* SPI1 Flag Register */ #define SPI1_STAT 0xffc02308 /* SPI1 Status Register */ diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/include/asm-blackfin/mach-bf548/gpio.h index dbf66bcabe3..cb8b0f15c9a 100644 --- a/include/asm-blackfin/mach-bf548/gpio.h +++ b/include/asm-blackfin/mach-bf548/gpio.h @@ -209,8 +209,3 @@ struct gpio_port_t { unsigned short dummy7; unsigned int port_mux; }; - -int gpio_request(unsigned short gpio, const char *label); -void peripheral_free(unsigned short per); -int peripheral_request_list(unsigned short per[], const char *label); -void peripheral_free_list(unsigned short per[]); diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h index e548d3cd81e..3b08cf9bd6f 100644 --- a/include/asm-blackfin/mach-bf548/irq.h +++ b/include/asm-blackfin/mach-bf548/irq.h @@ -55,287 +55,288 @@ Events (highest priority) EMU 0 /* The ABSTRACT IRQ definitions */ /** the first seven of the following are fixed, the rest you change if you need to **/ -#define IRQ_EMU 0 /* Emulation */ -#define IRQ_RST 1 /* reset */ -#define IRQ_NMI 2 /* Non Maskable */ -#define IRQ_EVX 3 /* Exception */ -#define IRQ_UNUSED 4 /* - unused interrupt*/ -#define IRQ_HWERR 5 /* Hardware Error */ -#define IRQ_CORETMR 6 /* Core timer */ - -#define BFIN_IRQ(x) ((x) + 7) - -#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ -#define IRQ_DMAC0_ERR BFIN_IRQ(1) /* DMAC0 Status Interrupt */ -#define IRQ_EPPI0_ERR BFIN_IRQ(2) /* EPPI0 Error Interrupt */ -#define IRQ_SPORT0_ERR BFIN_IRQ(3) /* SPORT0 Error Interrupt */ -#define IRQ_SPORT1_ERR BFIN_IRQ(4) /* SPORT1 Error Interrupt */ -#define IRQ_SPI0_ERR BFIN_IRQ(5) /* SPI0 Status(Error) Interrupt */ -#define IRQ_UART0_ERR BFIN_IRQ(6) /* UART0 Status(Error) Interrupt */ -#define IRQ_RTC BFIN_IRQ(7) /* RTC Interrupt */ -#define IRQ_EPPI0 BFIN_IRQ(8) /* EPPI0 Interrupt (DMA12) */ -#define IRQ_SPORT0_RX BFIN_IRQ(9) /* SPORT0 RX Interrupt (DMA0) */ -#define IRQ_SPORT0_TX BFIN_IRQ(10) /* SPORT0 TX Interrupt (DMA1) */ -#define IRQ_SPORT1_RX BFIN_IRQ(11) /* SPORT1 RX Interrupt (DMA2) */ -#define IRQ_SPORT1_TX BFIN_IRQ(12) /* SPORT1 TX Interrupt (DMA3) */ -#define IRQ_SPI0 BFIN_IRQ(13) /* SPI0 Interrupt (DMA4) */ -#define IRQ_UART0_RX BFIN_IRQ(14) /* UART0 RX Interrupt (DMA6) */ -#define IRQ_UART0_TX BFIN_IRQ(15) /* UART0 TX Interrupt (DMA7) */ -#define IRQ_TIMER8 BFIN_IRQ(16) /* TIMER 8 Interrupt */ -#define IRQ_TIMER9 BFIN_IRQ(17) /* TIMER 9 Interrupt */ -#define IRQ_TIMER10 BFIN_IRQ(18) /* TIMER 10 Interrupt */ -#define IRQ_PINT0 BFIN_IRQ(19) /* PINT0 Interrupt */ -#define IRQ_PINT1 BFIN_IRQ(20) /* PINT1 Interrupt */ -#define IRQ_MDMAS0 BFIN_IRQ(21) /* MDMA Stream 0 Interrupt */ -#define IRQ_MDMAS1 BFIN_IRQ(22) /* MDMA Stream 1 Interrupt */ -#define IRQ_WATCHDOG BFIN_IRQ(23) /* Watchdog Interrupt */ -#define IRQ_DMAC1_ERR BFIN_IRQ(24) /* DMAC1 Status (Error) Interrupt */ -#define IRQ_SPORT2_ERR BFIN_IRQ(25) /* SPORT2 Error Interrupt */ -#define IRQ_SPORT3_ERR BFIN_IRQ(26) /* SPORT3 Error Interrupt */ -#define IRQ_MXVR_DATA BFIN_IRQ(27) /* MXVR Data Interrupt */ -#define IRQ_SPI1_ERR BFIN_IRQ(28) /* SPI1 Status (Error) Interrupt */ -#define IRQ_SPI2_ERR BFIN_IRQ(29) /* SPI2 Status (Error) Interrupt */ -#define IRQ_UART1_ERR BFIN_IRQ(30) /* UART1 Status (Error) Interrupt */ -#define IRQ_UART2_ERR BFIN_IRQ(31) /* UART2 Status (Error) Interrupt */ -#define IRQ_CAN0_ERR BFIN_IRQ(32) /* CAN0 Status (Error) Interrupt */ -#define IRQ_SPORT2_RX BFIN_IRQ(33) /* SPORT2 RX (DMA18) Interrupt */ -#define IRQ_SPORT2_TX BFIN_IRQ(34) /* SPORT2 TX (DMA19) Interrupt */ -#define IRQ_SPORT3_RX BFIN_IRQ(35) /* SPORT3 RX (DMA20) Interrupt */ -#define IRQ_SPORT3_TX BFIN_IRQ(36) /* SPORT3 TX (DMA21) Interrupt */ -#define IRQ_EPPI1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */ -#define IRQ_EPPI2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */ -#define IRQ_SPI1 BFIN_IRQ(39) /* SPI1 (DMA5) Interrupt */ -#define IRQ_SPI2 BFIN_IRQ(40) /* SPI2 (DMA23) Interrupt */ -#define IRQ_UART1_RX BFIN_IRQ(41) /* UART1 RX (DMA8) Interrupt */ -#define IRQ_UART1_TX BFIN_IRQ(42) /* UART1 TX (DMA9) Interrupt */ -#define IRQ_ATAPI_RX BFIN_IRQ(43) /* ATAPI RX (DMA10) Interrupt */ -#define IRQ_ATAPI_TX BFIN_IRQ(44) /* ATAPI TX (DMA11) Interrupt */ -#define IRQ_TWI0 BFIN_IRQ(45) /* TWI0 Interrupt */ -#define IRQ_TWI1 BFIN_IRQ(46) /* TWI1 Interrupt */ -#define IRQ_TWI IRQ_TWI0 /* TWI Interrupt */ -#define IRQ_CAN0_RX BFIN_IRQ(47) /* CAN0 Receive Interrupt */ -#define IRQ_CAN0_TX BFIN_IRQ(48) /* CAN0 Transmit Interrupt */ -#define IRQ_MDMAS2 BFIN_IRQ(49) /* MDMA Stream 2 Interrupt */ -#define IRQ_MDMAS3 BFIN_IRQ(50) /* MDMA Stream 3 Interrupt */ -#define IRQ_MXVR_ERR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */ -#define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */ -#define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */ -#define IRQ_EPP1_ERR BFIN_IRQ(54) /* EPPI1 Error Interrupt */ -#define IRQ_EPP2_ERR BFIN_IRQ(55) /* EPPI2 Error Interrupt */ -#define IRQ_UART3_ERR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */ -#define IRQ_HOST_ERR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */ -#define IRQ_PIXC_ERR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */ -#define IRQ_NFC_ERR BFIN_IRQ(60) /* NFC Error Interrupt */ -#define IRQ_ATAPI_ERR BFIN_IRQ(61) /* ATAPI Error Interrupt */ -#define IRQ_CAN1_ERR BFIN_IRQ(62) /* CAN1 Status (Error) Interrupt */ -#define IRQ_HS_DMA_ERR BFIN_IRQ(63) /* Handshake DMA Status Interrupt */ -#define IRQ_PIXC_IN0 BFIN_IRQ(64) /* PIXC IN0 (DMA15) Interrupt */ -#define IRQ_PIXC_IN1 BFIN_IRQ(65) /* PIXC IN1 (DMA16) Interrupt */ -#define IRQ_PIXC_OUT BFIN_IRQ(66) /* PIXC OUT (DMA17) Interrupt */ -#define IRQ_SDH BFIN_IRQ(67) /* SDH/NFC (DMA22) Interrupt */ -#define IRQ_CNT BFIN_IRQ(68) /* CNT Interrupt */ -#define IRQ_KEY BFIN_IRQ(69) /* KEY Interrupt */ -#define IRQ_CAN1_RX BFIN_IRQ(70) /* CAN1 RX Interrupt */ -#define IRQ_CAN1_TX BFIN_IRQ(71) /* CAN1 TX Interrupt */ -#define IRQ_SDH_MASK0 BFIN_IRQ(72) /* SDH Mask 0 Interrupt */ -#define IRQ_SDH_MASK1 BFIN_IRQ(73) /* SDH Mask 1 Interrupt */ -#define IRQ_USB_INT0 BFIN_IRQ(75) /* USB INT0 Interrupt */ -#define IRQ_USB_INT1 BFIN_IRQ(76) /* USB INT1 Interrupt */ -#define IRQ_USB_INT2 BFIN_IRQ(77) /* USB INT2 Interrupt */ -#define IRQ_USB_DMA BFIN_IRQ(78) /* USB DMA Interrupt */ -#define IRQ_OPTSEC BFIN_IRQ(79) /* OTPSEC Interrupt */ -#define IRQ_TIMER0 BFIN_IRQ(86) /* Timer 0 Interrupt */ -#define IRQ_TIMER1 BFIN_IRQ(87) /* Timer 1 Interrupt */ -#define IRQ_TIMER2 BFIN_IRQ(88) /* Timer 2 Interrupt */ -#define IRQ_TIMER3 BFIN_IRQ(89) /* Timer 3 Interrupt */ -#define IRQ_TIMER4 BFIN_IRQ(90) /* Timer 4 Interrupt */ -#define IRQ_TIMER5 BFIN_IRQ(91) /* Timer 5 Interrupt */ -#define IRQ_TIMER6 BFIN_IRQ(92) /* Timer 6 Interrupt */ -#define IRQ_TIMER7 BFIN_IRQ(93) /* Timer 7 Interrupt */ -#define IRQ_PINT2 BFIN_IRQ(94) /* PINT2 Interrupt */ -#define IRQ_PINT3 BFIN_IRQ(95) /* PINT3 Interrupt */ - -#define SYS_IRQS IRQ_PINT3 - -#define BFIN_PA_IRQ(x) ((x) + SYS_IRQS + 1) -#define IRQ_PA0 BFIN_PA_IRQ(0) -#define IRQ_PA1 BFIN_PA_IRQ(1) -#define IRQ_PA2 BFIN_PA_IRQ(2) -#define IRQ_PA3 BFIN_PA_IRQ(3) -#define IRQ_PA4 BFIN_PA_IRQ(4) -#define IRQ_PA5 BFIN_PA_IRQ(5) -#define IRQ_PA6 BFIN_PA_IRQ(6) -#define IRQ_PA7 BFIN_PA_IRQ(7) -#define IRQ_PA8 BFIN_PA_IRQ(8) -#define IRQ_PA9 BFIN_PA_IRQ(9) -#define IRQ_PA10 BFIN_PA_IRQ(10) -#define IRQ_PA11 BFIN_PA_IRQ(11) -#define IRQ_PA12 BFIN_PA_IRQ(12) -#define IRQ_PA13 BFIN_PA_IRQ(13) -#define IRQ_PA14 BFIN_PA_IRQ(14) -#define IRQ_PA15 BFIN_PA_IRQ(15) - -#define BFIN_PB_IRQ(x) ((x) + IRQ_PA15 + 1) -#define IRQ_PB0 BFIN_PB_IRQ(0) -#define IRQ_PB1 BFIN_PB_IRQ(1) -#define IRQ_PB2 BFIN_PB_IRQ(2) -#define IRQ_PB3 BFIN_PB_IRQ(3) -#define IRQ_PB4 BFIN_PB_IRQ(4) -#define IRQ_PB5 BFIN_PB_IRQ(5) -#define IRQ_PB6 BFIN_PB_IRQ(6) -#define IRQ_PB7 BFIN_PB_IRQ(7) -#define IRQ_PB8 BFIN_PB_IRQ(8) -#define IRQ_PB9 BFIN_PB_IRQ(9) -#define IRQ_PB10 BFIN_PB_IRQ(10) -#define IRQ_PB11 BFIN_PB_IRQ(11) -#define IRQ_PB12 BFIN_PB_IRQ(12) -#define IRQ_PB13 BFIN_PB_IRQ(13) -#define IRQ_PB14 BFIN_PB_IRQ(14) -#define IRQ_PB15 BFIN_PB_IRQ(15) /* N/A */ - -#define BFIN_PC_IRQ(x) ((x) + IRQ_PB15 + 1) -#define IRQ_PC0 BFIN_PC_IRQ(0) -#define IRQ_PC1 BFIN_PC_IRQ(1) -#define IRQ_PC2 BFIN_PC_IRQ(2) -#define IRQ_PC3 BFIN_PC_IRQ(3) -#define IRQ_PC4 BFIN_PC_IRQ(4) -#define IRQ_PC5 BFIN_PC_IRQ(5) -#define IRQ_PC6 BFIN_PC_IRQ(6) -#define IRQ_PC7 BFIN_PC_IRQ(7) -#define IRQ_PC8 BFIN_PC_IRQ(8) -#define IRQ_PC9 BFIN_PC_IRQ(9) -#define IRQ_PC10 BFIN_PC_IRQ(10) -#define IRQ_PC11 BFIN_PC_IRQ(11) -#define IRQ_PC12 BFIN_PC_IRQ(12) -#define IRQ_PC13 BFIN_PC_IRQ(13) -#define IRQ_PC14 BFIN_PC_IRQ(14) /* N/A */ -#define IRQ_PC15 BFIN_PC_IRQ(15) /* N/A */ - -#define BFIN_PD_IRQ(x) ((x) + IRQ_PC15 + 1) -#define IRQ_PD0 BFIN_PD_IRQ(0) -#define IRQ_PD1 BFIN_PD_IRQ(1) -#define IRQ_PD2 BFIN_PD_IRQ(2) -#define IRQ_PD3 BFIN_PD_IRQ(3) -#define IRQ_PD4 BFIN_PD_IRQ(4) -#define IRQ_PD5 BFIN_PD_IRQ(5) -#define IRQ_PD6 BFIN_PD_IRQ(6) -#define IRQ_PD7 BFIN_PD_IRQ(7) -#define IRQ_PD8 BFIN_PD_IRQ(8) -#define IRQ_PD9 BFIN_PD_IRQ(9) -#define IRQ_PD10 BFIN_PD_IRQ(10) -#define IRQ_PD11 BFIN_PD_IRQ(11) -#define IRQ_PD12 BFIN_PD_IRQ(12) -#define IRQ_PD13 BFIN_PD_IRQ(13) -#define IRQ_PD14 BFIN_PD_IRQ(14) -#define IRQ_PD15 BFIN_PD_IRQ(15) - -#define BFIN_PE_IRQ(x) ((x) + IRQ_PD15 + 1) -#define IRQ_PE0 BFIN_PE_IRQ(0) -#define IRQ_PE1 BFIN_PE_IRQ(1) -#define IRQ_PE2 BFIN_PE_IRQ(2) -#define IRQ_PE3 BFIN_PE_IRQ(3) -#define IRQ_PE4 BFIN_PE_IRQ(4) -#define IRQ_PE5 BFIN_PE_IRQ(5) -#define IRQ_PE6 BFIN_PE_IRQ(6) -#define IRQ_PE7 BFIN_PE_IRQ(7) -#define IRQ_PE8 BFIN_PE_IRQ(8) -#define IRQ_PE9 BFIN_PE_IRQ(9) -#define IRQ_PE10 BFIN_PE_IRQ(10) -#define IRQ_PE11 BFIN_PE_IRQ(11) -#define IRQ_PE12 BFIN_PE_IRQ(12) -#define IRQ_PE13 BFIN_PE_IRQ(13) -#define IRQ_PE14 BFIN_PE_IRQ(14) -#define IRQ_PE15 BFIN_PE_IRQ(15) - -#define BFIN_PF_IRQ(x) ((x) + IRQ_PE15 + 1) -#define IRQ_PF0 BFIN_PF_IRQ(0) -#define IRQ_PF1 BFIN_PF_IRQ(1) -#define IRQ_PF2 BFIN_PF_IRQ(2) -#define IRQ_PF3 BFIN_PF_IRQ(3) -#define IRQ_PF4 BFIN_PF_IRQ(4) -#define IRQ_PF5 BFIN_PF_IRQ(5) -#define IRQ_PF6 BFIN_PF_IRQ(6) -#define IRQ_PF7 BFIN_PF_IRQ(7) -#define IRQ_PF8 BFIN_PF_IRQ(8) -#define IRQ_PF9 BFIN_PF_IRQ(9) -#define IRQ_PF10 BFIN_PF_IRQ(10) -#define IRQ_PF11 BFIN_PF_IRQ(11) -#define IRQ_PF12 BFIN_PF_IRQ(12) -#define IRQ_PF13 BFIN_PF_IRQ(13) -#define IRQ_PF14 BFIN_PF_IRQ(14) -#define IRQ_PF15 BFIN_PF_IRQ(15) - -#define BFIN_PG_IRQ(x) ((x) + IRQ_PF15 + 1) -#define IRQ_PG0 BFIN_PG_IRQ(0) -#define IRQ_PG1 BFIN_PG_IRQ(1) -#define IRQ_PG2 BFIN_PG_IRQ(2) -#define IRQ_PG3 BFIN_PG_IRQ(3) -#define IRQ_PG4 BFIN_PG_IRQ(4) -#define IRQ_PG5 BFIN_PG_IRQ(5) -#define IRQ_PG6 BFIN_PG_IRQ(6) -#define IRQ_PG7 BFIN_PG_IRQ(7) -#define IRQ_PG8 BFIN_PG_IRQ(8) -#define IRQ_PG9 BFIN_PG_IRQ(9) -#define IRQ_PG10 BFIN_PG_IRQ(10) -#define IRQ_PG11 BFIN_PG_IRQ(11) -#define IRQ_PG12 BFIN_PG_IRQ(12) -#define IRQ_PG13 BFIN_PG_IRQ(13) -#define IRQ_PG14 BFIN_PG_IRQ(14) -#define IRQ_PG15 BFIN_PG_IRQ(15) - -#define BFIN_PH_IRQ(x) ((x) + IRQ_PG15 + 1) -#define IRQ_PH0 BFIN_PH_IRQ(0) -#define IRQ_PH1 BFIN_PH_IRQ(1) -#define IRQ_PH2 BFIN_PH_IRQ(2) -#define IRQ_PH3 BFIN_PH_IRQ(3) -#define IRQ_PH4 BFIN_PH_IRQ(4) -#define IRQ_PH5 BFIN_PH_IRQ(5) -#define IRQ_PH6 BFIN_PH_IRQ(6) -#define IRQ_PH7 BFIN_PH_IRQ(7) -#define IRQ_PH8 BFIN_PH_IRQ(8) -#define IRQ_PH9 BFIN_PH_IRQ(9) -#define IRQ_PH10 BFIN_PH_IRQ(10) -#define IRQ_PH11 BFIN_PH_IRQ(11) -#define IRQ_PH12 BFIN_PH_IRQ(12) -#define IRQ_PH13 BFIN_PH_IRQ(13) -#define IRQ_PH14 BFIN_PH_IRQ(14) /* N/A */ -#define IRQ_PH15 BFIN_PH_IRQ(15) /* N/A */ - -#define BFIN_PI_IRQ(x) ((x) + IRQ_PH15 + 1) -#define IRQ_PI0 BFIN_PI_IRQ(0) -#define IRQ_PI1 BFIN_PI_IRQ(1) -#define IRQ_PI2 BFIN_PI_IRQ(2) -#define IRQ_PI3 BFIN_PI_IRQ(3) -#define IRQ_PI4 BFIN_PI_IRQ(4) -#define IRQ_PI5 BFIN_PI_IRQ(5) -#define IRQ_PI6 BFIN_PI_IRQ(6) -#define IRQ_PI7 BFIN_PI_IRQ(7) -#define IRQ_PI8 BFIN_PI_IRQ(8) -#define IRQ_PI9 BFIN_PI_IRQ(9) -#define IRQ_PI10 BFIN_PI_IRQ(10) -#define IRQ_PI11 BFIN_PI_IRQ(11) -#define IRQ_PI12 BFIN_PI_IRQ(12) -#define IRQ_PI13 BFIN_PI_IRQ(13) -#define IRQ_PI14 BFIN_PI_IRQ(14) -#define IRQ_PI15 BFIN_PI_IRQ(15) - -#define BFIN_PJ_IRQ(x) ((x) + IRQ_PI15 + 1) -#define IRQ_PJ0 BFIN_PJ_IRQ(0) -#define IRQ_PJ1 BFIN_PJ_IRQ(1) -#define IRQ_PJ2 BFIN_PJ_IRQ(2) -#define IRQ_PJ3 BFIN_PJ_IRQ(3) -#define IRQ_PJ4 BFIN_PJ_IRQ(4) -#define IRQ_PJ5 BFIN_PJ_IRQ(5) -#define IRQ_PJ6 BFIN_PJ_IRQ(6) -#define IRQ_PJ7 BFIN_PJ_IRQ(7) -#define IRQ_PJ8 BFIN_PJ_IRQ(8) -#define IRQ_PJ9 BFIN_PJ_IRQ(9) -#define IRQ_PJ10 BFIN_PJ_IRQ(10) -#define IRQ_PJ11 BFIN_PJ_IRQ(11) -#define IRQ_PJ12 BFIN_PJ_IRQ(12) -#define IRQ_PJ13 BFIN_PJ_IRQ(13) -#define IRQ_PJ14 BFIN_PJ_IRQ(14) /* N/A */ -#define IRQ_PJ15 BFIN_PJ_IRQ(15) /* N/A */ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* reset */ +#define IRQ_NMI 2 /* Non Maskable */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* - unused interrupt*/ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define BFIN_IRQ(x) ((x) + 7) + +#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ +#define IRQ_DMAC0_ERROR BFIN_IRQ(1) /* DMAC0 Status Interrupt */ +#define IRQ_EPPI0_ERROR BFIN_IRQ(2) /* EPPI0 Error Interrupt */ +#define IRQ_SPORT0_ERROR BFIN_IRQ(3) /* SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR BFIN_IRQ(4) /* SPORT1 Error Interrupt */ +#define IRQ_SPI0_ERROR BFIN_IRQ(5) /* SPI0 Status(Error) Interrupt */ +#define IRQ_UART0_ERROR BFIN_IRQ(6) /* UART0 Status(Error) Interrupt */ +#define IRQ_RTC BFIN_IRQ(7) /* RTC Interrupt */ +#define IRQ_EPPI0 BFIN_IRQ(8) /* EPPI0 Interrupt (DMA12) */ +#define IRQ_SPORT0_RX BFIN_IRQ(9) /* SPORT0 RX Interrupt (DMA0) */ +#define IRQ_SPORT0_TX BFIN_IRQ(10) /* SPORT0 TX Interrupt (DMA1) */ +#define IRQ_SPORT1_RX BFIN_IRQ(11) /* SPORT1 RX Interrupt (DMA2) */ +#define IRQ_SPORT1_TX BFIN_IRQ(12) /* SPORT1 TX Interrupt (DMA3) */ +#define IRQ_SPI0 BFIN_IRQ(13) /* SPI0 Interrupt (DMA4) */ +#define IRQ_UART0_RX BFIN_IRQ(14) /* UART0 RX Interrupt (DMA6) */ +#define IRQ_UART0_TX BFIN_IRQ(15) /* UART0 TX Interrupt (DMA7) */ +#define IRQ_TIMER8 BFIN_IRQ(16) /* TIMER 8 Interrupt */ +#define IRQ_TIMER9 BFIN_IRQ(17) /* TIMER 9 Interrupt */ +#define IRQ_TIMER10 BFIN_IRQ(18) /* TIMER 10 Interrupt */ +#define IRQ_PINT0 BFIN_IRQ(19) /* PINT0 Interrupt */ +#define IRQ_PINT1 BFIN_IRQ(20) /* PINT1 Interrupt */ +#define IRQ_MDMAS0 BFIN_IRQ(21) /* MDMA Stream 0 Interrupt */ +#define IRQ_MDMAS1 BFIN_IRQ(22) /* MDMA Stream 1 Interrupt */ +#define IRQ_WATCHDOG BFIN_IRQ(23) /* Watchdog Interrupt */ +#define IRQ_DMAC1_ERROR BFIN_IRQ(24) /* DMAC1 Status (Error) Interrupt */ +#define IRQ_SPORT2_ERROR BFIN_IRQ(25) /* SPORT2 Error Interrupt */ +#define IRQ_SPORT3_ERROR BFIN_IRQ(26) /* SPORT3 Error Interrupt */ +#define IRQ_MXVR_DATA BFIN_IRQ(27) /* MXVR Data Interrupt */ +#define IRQ_SPI1_ERROR BFIN_IRQ(28) /* SPI1 Status (Error) Interrupt */ +#define IRQ_SPI2_ERROR BFIN_IRQ(29) /* SPI2 Status (Error) Interrupt */ +#define IRQ_UART1_ERROR BFIN_IRQ(30) /* UART1 Status (Error) Interrupt */ +#define IRQ_UART2_ERROR BFIN_IRQ(31) /* UART2 Status (Error) Interrupt */ +#define IRQ_CAN0_ERROR BFIN_IRQ(32) /* CAN0 Status (Error) Interrupt */ +#define IRQ_SPORT2_RX BFIN_IRQ(33) /* SPORT2 RX (DMA18) Interrupt */ +#define IRQ_SPORT2_TX BFIN_IRQ(34) /* SPORT2 TX (DMA19) Interrupt */ +#define IRQ_SPORT3_RX BFIN_IRQ(35) /* SPORT3 RX (DMA20) Interrupt */ +#define IRQ_SPORT3_TX BFIN_IRQ(36) /* SPORT3 TX (DMA21) Interrupt */ +#define IRQ_EPPI1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */ +#define IRQ_EPPI2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */ +#define IRQ_SPI1 BFIN_IRQ(39) /* SPI1 (DMA5) Interrupt */ +#define IRQ_SPI2 BFIN_IRQ(40) /* SPI2 (DMA23) Interrupt */ +#define IRQ_UART1_RX BFIN_IRQ(41) /* UART1 RX (DMA8) Interrupt */ +#define IRQ_UART1_TX BFIN_IRQ(42) /* UART1 TX (DMA9) Interrupt */ +#define IRQ_ATAPI_RX BFIN_IRQ(43) /* ATAPI RX (DMA10) Interrupt */ +#define IRQ_ATAPI_TX BFIN_IRQ(44) /* ATAPI TX (DMA11) Interrupt */ +#define IRQ_TWI0 BFIN_IRQ(45) /* TWI0 Interrupt */ +#define IRQ_TWI1 BFIN_IRQ(46) /* TWI1 Interrupt */ +#define IRQ_CAN0_RX BFIN_IRQ(47) /* CAN0 Receive Interrupt */ +#define IRQ_CAN0_TX BFIN_IRQ(48) /* CAN0 Transmit Interrupt */ +#define IRQ_MDMAS2 BFIN_IRQ(49) /* MDMA Stream 2 Interrupt */ +#define IRQ_MDMAS3 BFIN_IRQ(50) /* MDMA Stream 3 Interrupt */ +#define IRQ_MXVR_ERROR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */ +#define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */ +#define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */ +#define IRQ_EPP1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */ +#define IRQ_EPP2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */ +#define IRQ_UART3_ERROR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */ +#define IRQ_HOST_ERROR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */ +#define IRQ_PIXC_ERROR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */ +#define IRQ_NFC_ERROR BFIN_IRQ(60) /* NFC Error Interrupt */ +#define IRQ_ATAPI_ERROR BFIN_IRQ(61) /* ATAPI Error Interrupt */ +#define IRQ_CAN1_ERROR BFIN_IRQ(62) /* CAN1 Status (Error) Interrupt */ +#define IRQ_HS_DMA_ERROR BFIN_IRQ(63) /* Handshake DMA Status Interrupt */ +#define IRQ_PIXC_IN0 BFIN_IRQ(64) /* PIXC IN0 (DMA15) Interrupt */ +#define IRQ_PIXC_IN1 BFIN_IRQ(65) /* PIXC IN1 (DMA16) Interrupt */ +#define IRQ_PIXC_OUT BFIN_IRQ(66) /* PIXC OUT (DMA17) Interrupt */ +#define IRQ_SDH BFIN_IRQ(67) /* SDH/NFC (DMA22) Interrupt */ +#define IRQ_CNT BFIN_IRQ(68) /* CNT Interrupt */ +#define IRQ_KEY BFIN_IRQ(69) /* KEY Interrupt */ +#define IRQ_CAN1_RX BFIN_IRQ(70) /* CAN1 RX Interrupt */ +#define IRQ_CAN1_TX BFIN_IRQ(71) /* CAN1 TX Interrupt */ +#define IRQ_SDH_MASK0 BFIN_IRQ(72) /* SDH Mask 0 Interrupt */ +#define IRQ_SDH_MASK1 BFIN_IRQ(73) /* SDH Mask 1 Interrupt */ +#define IRQ_USB_INT0 BFIN_IRQ(75) /* USB INT0 Interrupt */ +#define IRQ_USB_INT1 BFIN_IRQ(76) /* USB INT1 Interrupt */ +#define IRQ_USB_INT2 BFIN_IRQ(77) /* USB INT2 Interrupt */ +#define IRQ_USB_DMA BFIN_IRQ(78) /* USB DMA Interrupt */ +#define IRQ_OPTSEC BFIN_IRQ(79) /* OTPSEC Interrupt */ +#define IRQ_TIMER0 BFIN_IRQ(86) /* Timer 0 Interrupt */ +#define IRQ_TIMER1 BFIN_IRQ(87) /* Timer 1 Interrupt */ +#define IRQ_TIMER2 BFIN_IRQ(88) /* Timer 2 Interrupt */ +#define IRQ_TIMER3 BFIN_IRQ(89) /* Timer 3 Interrupt */ +#define IRQ_TIMER4 BFIN_IRQ(90) /* Timer 4 Interrupt */ +#define IRQ_TIMER5 BFIN_IRQ(91) /* Timer 5 Interrupt */ +#define IRQ_TIMER6 BFIN_IRQ(92) /* Timer 6 Interrupt */ +#define IRQ_TIMER7 BFIN_IRQ(93) /* Timer 7 Interrupt */ +#define IRQ_PINT2 BFIN_IRQ(94) /* PINT2 Interrupt */ +#define IRQ_PINT3 BFIN_IRQ(95) /* PINT3 Interrupt */ + +#define SYS_IRQS IRQ_PINT3 + +#define BFIN_PA_IRQ(x) ((x) + SYS_IRQS + 1) +#define IRQ_PA0 BFIN_PA_IRQ(0) +#define IRQ_PA1 BFIN_PA_IRQ(1) +#define IRQ_PA2 BFIN_PA_IRQ(2) +#define IRQ_PA3 BFIN_PA_IRQ(3) +#define IRQ_PA4 BFIN_PA_IRQ(4) +#define IRQ_PA5 BFIN_PA_IRQ(5) +#define IRQ_PA6 BFIN_PA_IRQ(6) +#define IRQ_PA7 BFIN_PA_IRQ(7) +#define IRQ_PA8 BFIN_PA_IRQ(8) +#define IRQ_PA9 BFIN_PA_IRQ(9) +#define IRQ_PA10 BFIN_PA_IRQ(10) +#define IRQ_PA11 BFIN_PA_IRQ(11) +#define IRQ_PA12 BFIN_PA_IRQ(12) +#define IRQ_PA13 BFIN_PA_IRQ(13) +#define IRQ_PA14 BFIN_PA_IRQ(14) +#define IRQ_PA15 BFIN_PA_IRQ(15) + +#define BFIN_PB_IRQ(x) ((x) + IRQ_PA15 + 1) +#define IRQ_PB0 BFIN_PB_IRQ(0) +#define IRQ_PB1 BFIN_PB_IRQ(1) +#define IRQ_PB2 BFIN_PB_IRQ(2) +#define IRQ_PB3 BFIN_PB_IRQ(3) +#define IRQ_PB4 BFIN_PB_IRQ(4) +#define IRQ_PB5 BFIN_PB_IRQ(5) +#define IRQ_PB6 BFIN_PB_IRQ(6) +#define IRQ_PB7 BFIN_PB_IRQ(7) +#define IRQ_PB8 BFIN_PB_IRQ(8) +#define IRQ_PB9 BFIN_PB_IRQ(9) +#define IRQ_PB10 BFIN_PB_IRQ(10) +#define IRQ_PB11 BFIN_PB_IRQ(11) +#define IRQ_PB12 BFIN_PB_IRQ(12) +#define IRQ_PB13 BFIN_PB_IRQ(13) +#define IRQ_PB14 BFIN_PB_IRQ(14) +#define IRQ_PB15 BFIN_PB_IRQ(15) /* N/A */ + +#define BFIN_PC_IRQ(x) ((x) + IRQ_PB15 + 1) +#define IRQ_PC0 BFIN_PC_IRQ(0) +#define IRQ_PC1 BFIN_PC_IRQ(1) +#define IRQ_PC2 BFIN_PC_IRQ(2) +#define IRQ_PC3 BFIN_PC_IRQ(3) +#define IRQ_PC4 BFIN_PC_IRQ(4) +#define IRQ_PC5 BFIN_PC_IRQ(5) +#define IRQ_PC6 BFIN_PC_IRQ(6) +#define IRQ_PC7 BFIN_PC_IRQ(7) +#define IRQ_PC8 BFIN_PC_IRQ(8) +#define IRQ_PC9 BFIN_PC_IRQ(9) +#define IRQ_PC10 BFIN_PC_IRQ(10) +#define IRQ_PC11 BFIN_PC_IRQ(11) +#define IRQ_PC12 BFIN_PC_IRQ(12) +#define IRQ_PC13 BFIN_PC_IRQ(13) +#define IRQ_PC14 BFIN_PC_IRQ(14) /* N/A */ +#define IRQ_PC15 BFIN_PC_IRQ(15) /* N/A */ + +#define BFIN_PD_IRQ(x) ((x) + IRQ_PC15 + 1) +#define IRQ_PD0 BFIN_PD_IRQ(0) +#define IRQ_PD1 BFIN_PD_IRQ(1) +#define IRQ_PD2 BFIN_PD_IRQ(2) +#define IRQ_PD3 BFIN_PD_IRQ(3) +#define IRQ_PD4 BFIN_PD_IRQ(4) +#define IRQ_PD5 BFIN_PD_IRQ(5) +#define IRQ_PD6 BFIN_PD_IRQ(6) +#define IRQ_PD7 BFIN_PD_IRQ(7) +#define IRQ_PD8 BFIN_PD_IRQ(8) +#define IRQ_PD9 BFIN_PD_IRQ(9) +#define IRQ_PD10 BFIN_PD_IRQ(10) +#define IRQ_PD11 BFIN_PD_IRQ(11) +#define IRQ_PD12 BFIN_PD_IRQ(12) +#define IRQ_PD13 BFIN_PD_IRQ(13) +#define IRQ_PD14 BFIN_PD_IRQ(14) +#define IRQ_PD15 BFIN_PD_IRQ(15) + +#define BFIN_PE_IRQ(x) ((x) + IRQ_PD15 + 1) +#define IRQ_PE0 BFIN_PE_IRQ(0) +#define IRQ_PE1 BFIN_PE_IRQ(1) +#define IRQ_PE2 BFIN_PE_IRQ(2) +#define IRQ_PE3 BFIN_PE_IRQ(3) +#define IRQ_PE4 BFIN_PE_IRQ(4) +#define IRQ_PE5 BFIN_PE_IRQ(5) +#define IRQ_PE6 BFIN_PE_IRQ(6) +#define IRQ_PE7 BFIN_PE_IRQ(7) +#define IRQ_PE8 BFIN_PE_IRQ(8) +#define IRQ_PE9 BFIN_PE_IRQ(9) +#define IRQ_PE10 BFIN_PE_IRQ(10) +#define IRQ_PE11 BFIN_PE_IRQ(11) +#define IRQ_PE12 BFIN_PE_IRQ(12) +#define IRQ_PE13 BFIN_PE_IRQ(13) +#define IRQ_PE14 BFIN_PE_IRQ(14) +#define IRQ_PE15 BFIN_PE_IRQ(15) + +#define BFIN_PF_IRQ(x) ((x) + IRQ_PE15 + 1) +#define IRQ_PF0 BFIN_PF_IRQ(0) +#define IRQ_PF1 BFIN_PF_IRQ(1) +#define IRQ_PF2 BFIN_PF_IRQ(2) +#define IRQ_PF3 BFIN_PF_IRQ(3) +#define IRQ_PF4 BFIN_PF_IRQ(4) +#define IRQ_PF5 BFIN_PF_IRQ(5) +#define IRQ_PF6 BFIN_PF_IRQ(6) +#define IRQ_PF7 BFIN_PF_IRQ(7) +#define IRQ_PF8 BFIN_PF_IRQ(8) +#define IRQ_PF9 BFIN_PF_IRQ(9) +#define IRQ_PF10 BFIN_PF_IRQ(10) +#define IRQ_PF11 BFIN_PF_IRQ(11) +#define IRQ_PF12 BFIN_PF_IRQ(12) +#define IRQ_PF13 BFIN_PF_IRQ(13) +#define IRQ_PF14 BFIN_PF_IRQ(14) +#define IRQ_PF15 BFIN_PF_IRQ(15) + +#define BFIN_PG_IRQ(x) ((x) + IRQ_PF15 + 1) +#define IRQ_PG0 BFIN_PG_IRQ(0) +#define IRQ_PG1 BFIN_PG_IRQ(1) +#define IRQ_PG2 BFIN_PG_IRQ(2) +#define IRQ_PG3 BFIN_PG_IRQ(3) +#define IRQ_PG4 BFIN_PG_IRQ(4) +#define IRQ_PG5 BFIN_PG_IRQ(5) +#define IRQ_PG6 BFIN_PG_IRQ(6) +#define IRQ_PG7 BFIN_PG_IRQ(7) +#define IRQ_PG8 BFIN_PG_IRQ(8) +#define IRQ_PG9 BFIN_PG_IRQ(9) +#define IRQ_PG10 BFIN_PG_IRQ(10) +#define IRQ_PG11 BFIN_PG_IRQ(11) +#define IRQ_PG12 BFIN_PG_IRQ(12) +#define IRQ_PG13 BFIN_PG_IRQ(13) +#define IRQ_PG14 BFIN_PG_IRQ(14) +#define IRQ_PG15 BFIN_PG_IRQ(15) + +#define BFIN_PH_IRQ(x) ((x) + IRQ_PG15 + 1) +#define IRQ_PH0 BFIN_PH_IRQ(0) +#define IRQ_PH1 BFIN_PH_IRQ(1) +#define IRQ_PH2 BFIN_PH_IRQ(2) +#define IRQ_PH3 BFIN_PH_IRQ(3) +#define IRQ_PH4 BFIN_PH_IRQ(4) +#define IRQ_PH5 BFIN_PH_IRQ(5) +#define IRQ_PH6 BFIN_PH_IRQ(6) +#define IRQ_PH7 BFIN_PH_IRQ(7) +#define IRQ_PH8 BFIN_PH_IRQ(8) +#define IRQ_PH9 BFIN_PH_IRQ(9) +#define IRQ_PH10 BFIN_PH_IRQ(10) +#define IRQ_PH11 BFIN_PH_IRQ(11) +#define IRQ_PH12 BFIN_PH_IRQ(12) +#define IRQ_PH13 BFIN_PH_IRQ(13) +#define IRQ_PH14 BFIN_PH_IRQ(14) /* N/A */ +#define IRQ_PH15 BFIN_PH_IRQ(15) /* N/A */ + +#define BFIN_PI_IRQ(x) ((x) + IRQ_PH15 + 1) +#define IRQ_PI0 BFIN_PI_IRQ(0) +#define IRQ_PI1 BFIN_PI_IRQ(1) +#define IRQ_PI2 BFIN_PI_IRQ(2) +#define IRQ_PI3 BFIN_PI_IRQ(3) +#define IRQ_PI4 BFIN_PI_IRQ(4) +#define IRQ_PI5 BFIN_PI_IRQ(5) +#define IRQ_PI6 BFIN_PI_IRQ(6) +#define IRQ_PI7 BFIN_PI_IRQ(7) +#define IRQ_PI8 BFIN_PI_IRQ(8) +#define IRQ_PI9 BFIN_PI_IRQ(9) +#define IRQ_PI10 BFIN_PI_IRQ(10) +#define IRQ_PI11 BFIN_PI_IRQ(11) +#define IRQ_PI12 BFIN_PI_IRQ(12) +#define IRQ_PI13 BFIN_PI_IRQ(13) +#define IRQ_PI14 BFIN_PI_IRQ(14) +#define IRQ_PI15 BFIN_PI_IRQ(15) + +#define BFIN_PJ_IRQ(x) ((x) + IRQ_PI15 + 1) +#define IRQ_PJ0 BFIN_PJ_IRQ(0) +#define IRQ_PJ1 BFIN_PJ_IRQ(1) +#define IRQ_PJ2 BFIN_PJ_IRQ(2) +#define IRQ_PJ3 BFIN_PJ_IRQ(3) +#define IRQ_PJ4 BFIN_PJ_IRQ(4) +#define IRQ_PJ5 BFIN_PJ_IRQ(5) +#define IRQ_PJ6 BFIN_PJ_IRQ(6) +#define IRQ_PJ7 BFIN_PJ_IRQ(7) +#define IRQ_PJ8 BFIN_PJ_IRQ(8) +#define IRQ_PJ9 BFIN_PJ_IRQ(9) +#define IRQ_PJ10 BFIN_PJ_IRQ(10) +#define IRQ_PJ11 BFIN_PJ_IRQ(11) +#define IRQ_PJ12 BFIN_PJ_IRQ(12) +#define IRQ_PJ13 BFIN_PJ_IRQ(13) +#define IRQ_PJ14 BFIN_PJ_IRQ(14) /* N/A */ +#define IRQ_PJ15 BFIN_PJ_IRQ(15) /* N/A */ + +#define GPIO_IRQ_BASE IRQ_PA0 #ifdef CONFIG_IRQCHIP_DEMUX_GPIO #define NR_IRQS (IRQ_PJ15+1) @@ -343,6 +344,34 @@ Events (highest priority) EMU 0 #define NR_IRQS (SYS_IRQS+1) #endif +/* For compatibility reasons with existing code */ + +#define IRQ_DMAC0_ERR IRQ_DMAC0_ERROR +#define IRQ_EPPI0_ERR IRQ_EPPI0_ERROR +#define IRQ_SPORT0_ERR IRQ_SPORT0_ERROR +#define IRQ_SPORT1_ERR IRQ_SPORT1_ERROR +#define IRQ_SPI0_ERR IRQ_SPI0_ERROR +#define IRQ_UART0_ERR IRQ_UART0_ERROR +#define IRQ_DMAC1_ERR IRQ_DMAC1_ERROR +#define IRQ_SPORT2_ERR IRQ_SPORT2_ERROR +#define IRQ_SPORT3_ERR IRQ_SPORT3_ERROR +#define IRQ_SPI1_ERR IRQ_SPI1_ERROR +#define IRQ_SPI2_ERR IRQ_SPI2_ERROR +#define IRQ_UART1_ERR IRQ_UART1_ERROR +#define IRQ_UART2_ERR IRQ_UART2_ERROR +#define IRQ_CAN0_ERR IRQ_CAN0_ERROR +#define IRQ_MXVR_ERR IRQ_MXVR_ERROR +#define IRQ_EPP1_ERR IRQ_EPP1_ERROR +#define IRQ_EPP2_ERR IRQ_EPP2_ERROR +#define IRQ_UART3_ERR IRQ_UART3_ERROR +#define IRQ_HOST_ERR IRQ_HOST_ERROR +#define IRQ_PIXC_ERR IRQ_PIXC_ERROR +#define IRQ_NFC_ERR IRQ_NFC_ERROR +#define IRQ_ATAPI_ERR IRQ_ATAPI_ERROR +#define IRQ_CAN1_ERR IRQ_CAN1_ERROR +#define IRQ_HS_DMA_ERR IRQ_HS_DMA_ERROR + + #define IVG7 7 #define IVG8 8 #define IVG9 9 diff --git a/include/asm-blackfin/mach-bf548/mem_map.h b/include/asm-blackfin/mach-bf548/mem_map.h index 72d80e8a6e8..ec1597e3183 100644 --- a/include/asm-blackfin/mach-bf548/mem_map.h +++ b/include/asm-blackfin/mach-bf548/mem_map.h @@ -51,10 +51,10 @@ /* Level 1 Memory */ /* Memory Map for ADSP-BF548 processors */ -#ifdef CONFIG_BLKFIN_ICACHE -#define BLKFIN_ICACHESIZE (16*1024) +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) #else -#define BLKFIN_ICACHESIZE (0*1024) +#define BFIN_ICACHESIZE (0*1024) #endif #define L1_CODE_START 0xFFA00000 @@ -63,29 +63,29 @@ #define L1_CODE_LENGTH 0xC000 -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH (0x8000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x8000 #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ /* Scratch Pad Memory */ diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h index f5b32d66517..bed95645688 100644 --- a/include/asm-blackfin/mach-bf561/anomaly.h +++ b/include/asm-blackfin/mach-bf561/anomaly.h @@ -1,184 +1,256 @@ - /* - * File: include/asm-blackfin/mach-bf561/anomaly.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * File: include/asm-blackfin/mach-bf561/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Copyright (C) 2004-2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List + * - Revision N, March 28, 2007; ADSP-BF561 Silicon Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ -/* We do not support 0.1 or 0.4 silicon - sorry */ -#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4)) -#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4 +/* We do not support 0.1, 0.2, or 0.4 silicon - sorry */ +#if __SILICON_REVISION__ < 3 || __SILICON_REVISION__ == 4 +# error Kernel will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4 #endif -/* Issues that are common to 0.5 and 0.3 silicon */ -#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) -#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in - slot1 and store of a P register in slot 2 is not - supported */ -#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not - updated at the same time. */ -#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned - memory locations */ -#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR - registers */ -#define ANOMALY_05000127 /* Signbits instruction not functional under certain - conditions */ -#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */ -#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out - upper bits */ -#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ -#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame - syncs */ -#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz - and higher devices */ -#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */ -#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */ -#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not - functional */ -#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the - shadow of a conditional branch */ -#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop - may cause bad instruction fetches */ -#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on - external SPORT TX and RX clocks */ -#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */ -#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal - voltage regulator (VDDint) to increase */ -#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal - voltage regulator (VDDint) to decrease */ -#define ANOMALY_05000272 /* Certain data cache write through modes fail for - VDDint <=0.9V */ -#define ANOMALY_05000274 /* Data cache write back to external synchronous memory - may be lost */ -#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */ -#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC - registers are interrupted */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +#define ANOMALY_05000074 (1) +/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ +#define ANOMALY_05000099 (__SILICON_REVISION__ < 5) +/* Trace Buffers may contain errors in emulation mode and/or exception, NMI, reset handlers */ +#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) +/* Testset instructions restricted to 32-bit aligned memory locations */ +#define ANOMALY_05000120 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Erroneous exception when enabling cache */ +#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) +/* Signbits instruction not functional under certain conditions */ +#define ANOMALY_05000127 (1) +/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */ +#define ANOMALY_05000134 (__SILICON_REVISION__ < 3) +/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */ +#define ANOMALY_05000135 (__SILICON_REVISION__ < 3) +/* Stall in multi-unit DMA operations */ +#define ANOMALY_05000136 (__SILICON_REVISION__ < 3) +/* Allowing the SPORT RX FIFO to fill will cause an overflow */ +#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) +/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ +#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) +/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ +#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) +/* DMA and TESTSET conflict when both are accessing external memory */ +#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) +/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ +#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) +/* MDMA may lose the first few words of a descriptor chain */ +#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) +/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ +#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) +/* IMDMA S1/D1 channel may stall */ +#define ANOMALY_05000149 (1) +/* DMA engine may lose data due to incorrect handshaking */ +#define ANOMALY_05000150 (__SILICON_REVISION__ < 3) +/* DMA stalls when all three controllers read data from the same source */ +#define ANOMALY_05000151 (__SILICON_REVISION__ < 3) +/* Execution stall when executing in L2 and doing external accesses */ +#define ANOMALY_05000152 (__SILICON_REVISION__ < 3) +/* Frame Delay in SPORT Multichannel Mode */ +#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) +/* SPORT TFS signal stays active in multichannel mode outside of valid channels */ +#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) +/* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */ +#define ANOMALY_05000156 (__SILICON_REVISION__ < 4) +/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) +/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ +#define ANOMALY_05000159 (__SILICON_REVISION__ < 3) +/* A read from external memory may return a wrong value with data cache enabled */ +#define ANOMALY_05000160 (__SILICON_REVISION__ < 3) +/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */ +#define ANOMALY_05000161 (__SILICON_REVISION__ < 3) +/* DMEM_CONTROL<12> is not set on Reset */ +#define ANOMALY_05000162 (__SILICON_REVISION__ < 3) +/* SPORT transmit data is not gated by external frame sync in certain conditions */ +#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) +/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +#define ANOMALY_05000166 (1) +/* Turning Serial Ports on with External Frame Syncs */ +#define ANOMALY_05000167 (1) +/* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000168 (__SILICON_REVISION__ < 5) +/* DATA CPLB page miss can result in lost write-through cache data writes */ +#define ANOMALY_05000169 (__SILICON_REVISION__ < 5) +/* Boot-ROM code modifies SICA_IWRx wakeup registers */ +#define ANOMALY_05000171 (__SILICON_REVISION__ < 5) +/* DSPID register values incorrect */ +#define ANOMALY_05000172 (__SILICON_REVISION__ < 3) +/* DMA vs Core accesses to external memory */ +#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) +/* Cache Fill Buffer Data lost */ +#define ANOMALY_05000174 (__SILICON_REVISION__ < 5) +/* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000175 (__SILICON_REVISION__ < 5) +/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +#define ANOMALY_05000176 (__SILICON_REVISION__ < 5) +/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ +#define ANOMALY_05000179 (__SILICON_REVISION__ < 5) +/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ +#define ANOMALY_05000180 (1) +/* Disabling the PPI resets the PPI configuration registers */ +#define ANOMALY_05000181 (__SILICON_REVISION__ < 5) +/* IMDMA does not operate to full speed for 600MHz and higher devices */ +#define ANOMALY_05000182 (1) +/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */ +#define ANOMALY_05000184 (__SILICON_REVISION__ < 5) +/* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000185 (__SILICON_REVISION__ < 5) +/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */ +#define ANOMALY_05000186 (__SILICON_REVISION__ < 5) +/* IMDMA Corrupted Data after a Halt */ +#define ANOMALY_05000187 (1) +/* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */ +#define ANOMALY_05000188 (__SILICON_REVISION__ < 5) +/* False Protection Exceptions */ +#define ANOMALY_05000189 (__SILICON_REVISION__ < 5) +/* PPI not functional at core voltage < 1Volt */ +#define ANOMALY_05000190 (1) +/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ +#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) +/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ +#define ANOMALY_05000193 (__SILICON_REVISION__ < 5) +/* Restarting SPORT in Specific Modes May Cause Data Corruption */ +#define ANOMALY_05000194 (__SILICON_REVISION__ < 5) +/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +#define ANOMALY_05000198 (__SILICON_REVISION__ < 5) +/* Current DMA Address Shows Wrong Value During Carry Fix */ +#define ANOMALY_05000199 (__SILICON_REVISION__ < 5) +/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */ +#define ANOMALY_05000200 (__SILICON_REVISION__ < 5) +/* Possible Infinite Stall with Specific Dual-DAG Situation */ +#define ANOMALY_05000202 (__SILICON_REVISION__ < 5) +/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +#define ANOMALY_05000204 (__SILICON_REVISION__ < 5) +/* Specific sequence that can cause DMA error or DMA stopping */ +#define ANOMALY_05000205 (__SILICON_REVISION__ < 5) +/* Recovery from "Brown-Out" Condition */ +#define ANOMALY_05000207 (__SILICON_REVISION__ < 5) +/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */ +#define ANOMALY_05000208 (1) +/* Speed Path in Computational Unit Affects Certain Instructions */ +#define ANOMALY_05000209 (__SILICON_REVISION__ < 5) +/* UART TX Interrupt Masked Erroneously */ +#define ANOMALY_05000215 (__SILICON_REVISION__ < 5) +/* NMI Event at Boot Time Results in Unpredictable State */ +#define ANOMALY_05000219 (__SILICON_REVISION__ < 5) +/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */ +#define ANOMALY_05000220 (__SILICON_REVISION__ < 5) +/* Incorrect Pulse-Width of UART Start Bit */ +#define ANOMALY_05000225 (__SILICON_REVISION__ < 5) +/* Scratchpad Memory Bank Reads May Return Incorrect Data */ +#define ANOMALY_05000227 (__SILICON_REVISION__ < 5) +/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */ +#define ANOMALY_05000230 (__SILICON_REVISION__ < 5) +/* UART STB Bit Incorrectly Affects Receiver Setting */ +#define ANOMALY_05000231 (__SILICON_REVISION__ < 5) +/* SPORT data transmit lines are incorrectly driven in multichannel mode */ +#define ANOMALY_05000232 (__SILICON_REVISION__ < 5) +/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */ +#define ANOMALY_05000242 (__SILICON_REVISION__ < 5) +/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 5) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (__SILICON_REVISION__ < 5) +/* TESTSET operation forces stall on the other core */ +#define ANOMALY_05000248 (__SILICON_REVISION__ < 5) +/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ +#define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5) +/* Exception Not Generated for MMR Accesses in Reserved Region */ +#define ANOMALY_05000251 (__SILICON_REVISION__ < 5) +/* Maximum External Clock Speed for Timers */ +#define ANOMALY_05000253 (__SILICON_REVISION__ < 5) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (__SILICON_REVISION__ > 3) +/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ +#define ANOMALY_05000257 (__SILICON_REVISION__ < 5) +/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */ +#define ANOMALY_05000258 (__SILICON_REVISION__ < 5) +/* ICPLB_STATUS MMR Register May Be Corrupted */ +#define ANOMALY_05000260 (__SILICON_REVISION__ < 5) +/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 5) +/* Stores To Data Cache May Be Lost */ +#define ANOMALY_05000262 (__SILICON_REVISION__ < 5) +/* Hardware Loop Corrupted When Taking an ICPLB Exception */ +#define ANOMALY_05000263 (__SILICON_REVISION__ < 5) +/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */ +#define ANOMALY_05000264 (__SILICON_REVISION__ < 5) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (__SILICON_REVISION__ < 5) +/* IMDMA destination IRQ status must be read prior to using IMDMA */ +#define ANOMALY_05000266 (__SILICON_REVISION__ > 3) +/* IMDMA may corrupt data under certain conditions */ +#define ANOMALY_05000267 (1) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */ +#define ANOMALY_05000269 (1) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ +#define ANOMALY_05000270 (1) +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ +#define ANOMALY_05000272 (1) +/* Data cache write back to external synchronous memory may be lost */ +#define ANOMALY_05000274 (1) +/* PPI Timing and Sampling Information Updates */ +#define ANOMALY_05000275 (__SILICON_REVISION__ > 2) +/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ +#define ANOMALY_05000276 (__SILICON_REVISION__ < 5) +/* Disabling Peripherals with DMA Running May Cause DMA System Instability */ +#define ANOMALY_05000278 (__SILICON_REVISION__ < 5) +/* False Hardware Error Exception When ISR Context Is Not Restored */ +#define ANOMALY_05000281 (__SILICON_REVISION__ < 5) +/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +#define ANOMALY_05000283 (1) +/* A read will receive incorrect data under certain conditions */ +#define ANOMALY_05000287 (__SILICON_REVISION__ < 5) +/* SPORTs May Receive Bad Data If FIFOs Fill Up */ +#define ANOMALY_05000288 (__SILICON_REVISION__ < 5) +/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ +#define ANOMALY_05000301 (1) +/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +#define ANOMALY_05000302 (1) +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +#define ANOMALY_05000305 (__SILICON_REVISION__ < 5) +/* SCKELOW Bit Does Not Maintain State Through Hibernate */ +#define ANOMALY_05000307 (__SILICON_REVISION__ < 5) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* PPI Is Level-Sensitive on First Transfer */ +#define ANOMALY_05000313 (1) +/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +#define ANOMALY_05000315 (1) +/* PF2 Output Remains Asserted After SPI Master Boot */ +#define ANOMALY_05000320 (__SILICON_REVISION__ > 3) +/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */ +#define ANOMALY_05000323 (1) +/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */ +#define ANOMALY_05000326 (__SILICON_REVISION__ > 3) +/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */ +#define ANOMALY_05000331 (__SILICON_REVISION__ < 5) +/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */ +#define ANOMALY_05000332 (__SILICON_REVISION__ < 5) +/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */ +#define ANOMALY_05000333 (__SILICON_REVISION__ < 5) -#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */ +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000158 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000311 (0) -#if (defined(CONFIG_BF_REV_0_5)) -#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT - mode with external clock */ -#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to - using IMDMA */ #endif - -#if (defined(CONFIG_BF_REV_0_3)) -#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input) - Mode with 0 Frame Syncs */ -#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */ -#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through - cache data writes */ -#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */ -#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */ -#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */ -#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an - accumulator saturation */ -#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General - Purpose TX or RX modes */ -#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration - registers */ -#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with - External Frame Syncs */ -#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */ -#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits - (not a meaningful mode) */ -#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer - Placement in Memory */ -#define ANOMALY_05000189 /* False Protection Exception */ -#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs - when polarity setting is changed */ -#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data - corruption */ -#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding - memory read */ -#define ANOMALY_05000199 /* DMA current address shows wrong value during carry - fix */ -#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during - inactive channels in certain conditions */ -#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG - situation */ -#define ANOMALY_05000204 /* Incorrect data read with write-through cache and - allocate cache lines on reads only mode */ -#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA - stopping */ -#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ -#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain - instructions */ -#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ -#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable - state */ -#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and - Non-Cached On-Chip L2 Memory */ -#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ -#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect - data */ -#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate - Differences in certain Conditions */ -#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ -#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in - multichannel mode */ -#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to - hardware reset */ -#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of - Control causes failures */ -#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */ -#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel - (TDM) mode in certain conditions */ -#define ANOMALY_05000251 /* Exception not generated for MMR accesses in - reserved region */ -#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ -#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12 - of the ICPLB Data registers differ */ -#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ -#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ -#define ANOMALY_05000262 /* Stores to data cache may be lost */ -#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB - exception */ -#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second - to last instruction in hardware loop */ -#define ANOMALY_05000276 /* Timing requirements change for External Frame - Sync PPI Modes with non-zero PPI_DELAY */ -#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause - DMA system instability */ -#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is - not restored */ -#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed - in a particular stage */ -#define ANOMALY_05000287 /* A read will receive incorrect data under certain - conditions */ -#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */ -#endif - -#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/include/asm-blackfin/mach-bf561/bf561.h index 96a5d3a47e4..17e1d5dcef0 100644 --- a/include/asm-blackfin/mach-bf561/bf561.h +++ b/include/asm-blackfin/mach-bf561/bf561.h @@ -73,13 +73,13 @@ */ -#define BLKFIN_ISUBBANKS 4 -#define BLKFIN_IWAYS 4 -#define BLKFIN_ILINES 32 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 -#define BLKFIN_DSUBBANKS 4 -#define BLKFIN_DWAYS 2 -#define BLKFIN_DLINES 64 +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 #define WAY0_L 0x1 #define WAY1_L 0x2 @@ -230,93 +230,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO | V_B0PEN | V_B1PEN | V_B2PEN | V_B3PEN | 0x0002) -#define MAX_VC 600000000 -#define MIN_VC 50000000 - -/******************************* PLL Settings ********************************/ -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#if (CONFIG_VCO_MULT < 0) -#error "VCO Multiplier is less than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT == 0) -#error "VCO Multiplier should be greater than 0. Please select a different value" -#endif - -#ifndef CONFIG_CLKIN_HALF -#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -#else -#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) -#endif - -#ifndef CONFIG_PLL_BYPASS -#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) -#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#if (CONFIG_SCLK_DIV < 1) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_SCLK_DIV > 15) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_CCLK_DIV != 1) -#if (CONFIG_CCLK_DIV != 2) -#if (CONFIG_CCLK_DIV != 4) -#if (CONFIG_CCLK_DIV != 8) -#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" -#endif -#endif -#endif -#endif - -#if (CONFIG_VCO_HZ > MAX_VC) -#error "VCO selected is more than maximum value. Please change the VCO multipler" -#endif - -#if (CONFIG_SCLK_HZ > 133000000) -#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ < 27000000) -#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) -#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) -#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) -#error "Please select sclk less than cclk" -#endif -#endif -#endif - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1) -#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK -#endif - -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ - #ifdef CONFIG_BF561 #define CPU "BF561" #define CPUID 0x027bb000 @@ -326,83 +239,4 @@ #define CPUID 0x0 #endif -#if (CONFIG_MEM_SIZE % 4) -#error "SDRAM memory size must be a multiple of 4MB!" -#endif -#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) -#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) -#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158_WORKAROUND 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#else /*Write Through */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_DIRTY \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#endif - - -#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) -#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) -#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) -#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) - -#define L2_MEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) - -#define SIZE_1K 0x00000400 /* 1K */ -#define SIZE_4K 0x00001000 /* 4K */ -#define SIZE_1M 0x00100000 /* 1M */ -#define SIZE_4M 0x00400000 /* 4M */ - -#define MAX_CPLBS (16 * 2) - -/* -* Number of required data CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 16 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Data Memory -* 1 for L2 Data Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -* 64 for ASYNC Memory -*/ - - -#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1 + 64) * 2) - -/* -* Number of required instruction CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 12 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Instruction Memory -* 1 for L2 Instruction Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -*/ - -#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1 + 1) * 2) - -#if 0 /* comment by mhfan */ -/* Event Vector Table Address */ -#define EVT_EMULATION_ADDR 0xffe02000 -#define EVT_RESET_ADDR 0xffe02004 -#define EVT_NMI_ADDR 0xffe02008 -#define EVT_EXCEPTION_ADDR 0xffe0200c -#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010 -#define EVT_HARDWARE_ERROR_ADDR 0xffe02014 -#define EVT_TIMER_ADDR 0xffe02018 -#define EVT_IVG7_ADDR 0xffe0201c -#define EVT_IVG8_ADDR 0xffe02020 -#define EVT_IVG9_ADDR 0xffe02024 -#define EVT_IVG10_ADDR 0xffe02028 -#define EVT_IVG11_ADDR 0xffe0202c -#define EVT_IVG12_ADDR 0xffe02030 -#define EVT_IVG13_ADDR 0xffe02034 -#define EVT_IVG14_ADDR 0xffe02038 -#define EVT_IVG15_ADDR 0xffe0203c -#define EVT_OVERRIDE_ADDR 0xffe02100 -#endif /* comment by mhfan */ - #endif /* __MACH_BF561_H__ */ diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h index 2537c845e8b..562aee39895 100644 --- a/include/asm-blackfin/mach-bf561/blackfin.h +++ b/include/asm-blackfin/mach-bf561/blackfin.h @@ -38,7 +38,7 @@ #include "defBF561.h" #include "anomaly.h" -#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY)) +#if !defined(__ASSEMBLY__) #include "cdefBF561.h" #endif diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h index 73d4d65249c..d667816486c 100644 --- a/include/asm-blackfin/mach-bf561/cdefBF561.h +++ b/include/asm-blackfin/mach-bf561/cdefBF561.h @@ -31,11 +31,8 @@ #ifndef _CDEF_BF561_H #define _CDEF_BF561_H -/* -#if !defined(__ADSPBF561__) -#warning cdefBF561.h should only be included for BF561 chip. -#endif -*/ +#include <asm/blackfin.h> + /* include all Core registers and bit definitions */ #include "defBF561.h" @@ -67,7 +64,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write32(SICA_IWR1, 0); bfin_write16(VR_CTL, val); - __builtin_bfin_ssync(); + SSYNC(); local_irq_save(flags); asm("IDLE;"); diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h index 0f2dc6e6335..bf7dc4e0006 100644 --- a/include/asm-blackfin/mach-bf561/defBF561.h +++ b/include/asm-blackfin/mach-bf561/defBF561.h @@ -120,6 +120,7 @@ #define UART_GCTL 0xFFC00424 /* Global Control Register */ /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI0_REGBASE 0xFFC00500 #define SPI_CTL 0xFFC00500 /* SPI Control Register */ #define SPI_FLG 0xFFC00504 /* SPI Flag register */ #define SPI_STAT 0xFFC00508 /* SPI Status register */ diff --git a/include/asm-blackfin/mach-bf561/irq.h b/include/asm-blackfin/mach-bf561/irq.h index a753ce720d7..12789927db3 100644 --- a/include/asm-blackfin/mach-bf561/irq.h +++ b/include/asm-blackfin/mach-bf561/irq.h @@ -289,6 +289,8 @@ #define IRQ_PF46 119 #define IRQ_PF47 120 +#define GPIO_IRQ_BASE IRQ_PF0 + #ifdef CONFIG_IRQCHIP_DEMUX_GPIO #define NR_IRQS (IRQ_PF47 + 1) #else diff --git a/include/asm-blackfin/mach-bf561/mem_map.h b/include/asm-blackfin/mach-bf561/mem_map.h index ebac9a8d838..f7ac09cf2c3 100644 --- a/include/asm-blackfin/mach-bf561/mem_map.h +++ b/include/asm-blackfin/mach-bf561/mem_map.h @@ -21,10 +21,10 @@ /* Level 1 Memory */ -#ifdef CONFIG_BLKFIN_CACHE -#define BLKFIN_ICACHESIZE (16*1024) +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) #else -#define BLKFIN_ICACHESIZE (0*1024) +#define BFIN_ICACHESIZE (0*1024) #endif /* Memory Map for ADSP-BF561 processors */ @@ -36,29 +36,29 @@ #define L1_CODE_LENGTH 0x4000 -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH (0x8000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x8000 #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ #endif /* Level 2 Memory */ diff --git a/include/asm-blackfin/mach-bf561/portmux.h b/include/asm-blackfin/mach-bf561/portmux.h index 10d11d5ffe2..132ad31665e 100644 --- a/include/asm-blackfin/mach-bf561/portmux.h +++ b/include/asm-blackfin/mach-bf561/portmux.h @@ -81,7 +81,7 @@ #define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PF1)) #define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PF0)) #define P_SPI0_MOSI (P_DONTCARE) -#define P_SPI0_MIS0 (P_DONTCARE) +#define P_SPI0_MISO (P_DONTCARE) #define P_SPI0_SCK (P_DONTCARE) #endif /* _MACH_PORTMUX_H_ */ diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h index 94ed381e560..ede210eca4e 100644 --- a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h +++ b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h @@ -39,7 +39,7 @@ #define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS) #define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val) #define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL) -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 extern void bfin_write_DMEM_CONTROL(unsigned int val); #else #define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val) @@ -129,7 +129,7 @@ extern void bfin_write_DMEM_CONTROL(unsigned int val); #define DTEST_DATA3 0xFFE0040C */ #define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL) -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 extern void bfin_write_IMEM_CONTROL(unsigned int val); #else #define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val) diff --git a/include/asm-blackfin/mach-common/clocks.h b/include/asm-blackfin/mach-common/clocks.h new file mode 100644 index 00000000000..033bba92d61 --- /dev/null +++ b/include/asm-blackfin/mach-common/clocks.h @@ -0,0 +1,70 @@ +/* + * File: include/asm-blackfin/mach-common/clocks.h + * Based on: include/asm-blackfin/mach-bf537/bf537.h + * Author: Robin Getz <rgetz@blackfin.uclinux.org> + * + * Created: 25Jul07 + * Description: Common Clock definitions for various kernel files + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BFIN_CLOCKS_H +#define _BFIN_CLOCKS_H + +#ifdef CONFIG_CCLK_DIV_1 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +# define CONFIG_CCLK_DIV 1 +#endif + +#ifdef CONFIG_CCLK_DIV_2 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +# define CONFIG_CCLK_DIV 2 +#endif + +#ifdef CONFIG_CCLK_DIV_4 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +# define CONFIG_CCLK_DIV 4 +#endif + +#ifdef CONFIG_CCLK_DIV_8 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +# define CONFIG_CCLK_DIV 8 +#endif + +#ifndef CONFIG_PLL_BYPASS +# ifndef CONFIG_CLKIN_HALF +# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) +# else +# define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) +# endif + +# define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) +# define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) + +#else +# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ) +# define CONFIG_CCLK_HZ (CONFIG_CLKIN_HZ) +# define CONFIG_SCLK_HZ (CONFIG_CLKIN_HZ) +# define CONFIG_VCO_MULT 0 +#endif + +#endif diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/include/asm-blackfin/mach-common/def_LPBlackfin.h index be1ece8c0c2..c1d8c4a78fc 100644 --- a/include/asm-blackfin/mach-common/def_LPBlackfin.h +++ b/include/asm-blackfin/mach-common/def_LPBlackfin.h @@ -33,81 +33,77 @@ #include <asm/mach/anomaly.h> -/*#if !defined(__ADSPLPBLACKFIN__) -#warning def_LPBlackfin.h should only be included for 532 compatible chips. -#endif -*/ - #define MK_BMSK_(x) (1<<x) -#if defined(ANOMALY_05000198) - -#define bfin_read8(addr) ({ unsigned char __v; \ - __asm__ __volatile__ ("NOP;\n\t" \ - "%0 = b[%1] (z);\n\t" \ - : "=d"(__v) : "a"(addr)); \ - __v; }) - -#define bfin_read16(addr) ({ unsigned __v; \ - __asm__ __volatile__ ("NOP;\n\t"\ - "%0 = w[%1] (z);\n\t"\ - : "=d"(__v) : "a"(addr)); (unsigned short)__v; }) - -#define bfin_read32(addr) ({ unsigned __v; \ - __asm__ __volatile__ ("NOP;\n\t"\ - "%0 = [%1];\n\t"\ - : "=d"(__v) : "a"(addr)); __v; }) - -#define bfin_write8(addr, val) ({ \ - __asm__ __volatile__ ("NOP;\n\t" \ - "b[%0] = %1;\n\t" \ - : : "a"(addr), "d"(val) : "memory");}) +#ifndef __ASSEMBLY__ -#define bfin_write16(addr,val) ({\ - __asm__ __volatile__ ("NOP;\n\t"\ - "w[%0] = %1;\n\t"\ - : : "a"(addr) , "d"(val) : "memory");}) - -#define bfin_write32(addr,val) ({\ - __asm__ __volatile__ ("NOP;\n\t"\ - "[%0] = %1;\n\t"\ - : : "a"(addr) , "d"(val) : "memory");}) +#include <linux/types.h> +#if ANOMALY_05000198 +# define NOP_PAD_ANOMALY_05000198 "nop;" #else - -#define bfin_read8(addr) ({ unsigned char __v; \ - __asm__ __volatile__ ( \ - "%0 = b[%1] (z);\n\t" \ - :"=d"(__v) : "a"(addr)); \ - __v; }) - -#define bfin_read16(addr) ({ unsigned __v; \ - __asm__ __volatile__ (\ - "%0 = w[%1] (z);\n\t"\ - : "=d"(__v) : "a"(addr)); (unsigned short)__v; }) - -#define bfin_read32(addr) ({ unsigned __v; \ - __asm__ __volatile__ (\ - "%0 = [%1];\n\t"\ - : "=d"(__v) : "a"(addr)); __v; }) - -#define bfin_write8(addr, val) ({ \ - __asm__ __volatile__ ( \ - "b[%0] = %1; \n\t" \ - ::"a"(addr), "d"(val) : "memory");}) - -#define bfin_write16(addr,val) ({\ - __asm__ __volatile__ (\ - "w[%0] = %1;\n\t"\ - : : "a"(addr) , "d"(val) : "memory");}) - -#define bfin_write32(addr,val) ({\ - __asm__ __volatile__ (\ - "[%0] = %1;\n\t"\ - : : "a"(addr) , "d"(val) : "memory");}) - +# define NOP_PAD_ANOMALY_05000198 #endif +#define bfin_read8(addr) ({ \ + uint8_t __v; \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "%0 = b[%1] (z);" \ + : "=d" (__v) \ + : "a" (addr) \ + ); \ + __v; }) + +#define bfin_read16(addr) ({ \ + uint16_t __v; \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "%0 = w[%1] (z);" \ + : "=d" (__v) \ + : "a" (addr) \ + ); \ + __v; }) + +#define bfin_read32(addr) ({ \ + uint32_t __v; \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "%0 = [%1];" \ + : "=d" (__v) \ + : "a" (addr) \ + ); \ + __v; }) + +#define bfin_write8(addr, val) \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "b[%0] = %1;" \ + : \ + : "a" (addr), "d" (val) \ + : "memory" \ + ) + +#define bfin_write16(addr, val) \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "w[%0] = %1;" \ + : \ + : "a" (addr), "d" (val) \ + : "memory" \ + ) + +#define bfin_write32(addr, val) \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "[%0] = %1;" \ + : \ + : "a" (addr), "d" (val) \ + : "memory" \ + ) + +#endif /* __ASSEMBLY__ */ + /************************************************** * System Register Bits **************************************************/ @@ -643,6 +639,7 @@ #define CPLB_USER_RD 0x00000004 /* 0=no read access, 1=read access * allowed (user mode) */ + #define PAGE_SIZE_1KB 0x00000000 /* 1 KB page size */ #define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */ #define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */ @@ -675,6 +672,8 @@ */ #define CPLB_WT 0x00004000 /* 0=write-back, 1=write-through */ +#define CPLB_ALL_ACCESS CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR + /* TBUFCTL Masks */ #define TBUFPWR 0x0001 #define TBUFEN 0x0002 diff --git a/include/asm-blackfin/pgtable.h b/include/asm-blackfin/pgtable.h index 5a8f9e431c4..b11b114689c 100644 --- a/include/asm-blackfin/pgtable.h +++ b/include/asm-blackfin/pgtable.h @@ -4,7 +4,7 @@ #include <asm-generic/4level-fixup.h> #include <asm/page.h> -#include <asm/cplb.h> +#include <asm/mach-common/def_LPBlackfin.h> typedef pte_t *pte_addr_t; /* diff --git a/include/asm-blackfin/reboot.h b/include/asm-blackfin/reboot.h new file mode 100644 index 00000000000..6d448b5f598 --- /dev/null +++ b/include/asm-blackfin/reboot.h @@ -0,0 +1,20 @@ +/* + * include/asm-blackfin/reboot.h - shutdown/reboot header + * + * Copyright 2004-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __ASM_REBOOT_H__ +#define __ASM_REBOOT_H__ + +/* optional board specific hooks */ +extern void native_machine_restart(char *cmd); +extern void native_machine_halt(void); +extern void native_machine_power_off(void); + +/* common reboot workarounds */ +extern void bfin_gpio_reset_spi0_ssel1(void); + +#endif diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h index 5e5f1a0566c..2b3d47d0bbb 100644 --- a/include/asm-blackfin/system.h +++ b/include/asm-blackfin/system.h @@ -36,6 +36,7 @@ #include <linux/linkage.h> #include <linux/compiler.h> +#include <asm/mach/anomaly.h> /* * Interrupt configuring macros. @@ -43,53 +44,60 @@ extern unsigned long irq_flags; -#define local_irq_enable() do { \ - __asm__ __volatile__ ( \ - "sti %0;" \ - ::"d"(irq_flags)); \ -} while (0) +#define local_irq_enable() \ + __asm__ __volatile__( \ + "sti %0;" \ + : \ + : "d" (irq_flags) \ + ) -#define local_irq_disable() do { \ - int _tmp_dummy; \ - __asm__ __volatile__ ( \ - "cli %0;" \ - :"=d" (_tmp_dummy):); \ -} while (0) +#define local_irq_disable() \ + do { \ + int __tmp_dummy; \ + __asm__ __volatile__( \ + "cli %0;" \ + : "=d" (__tmp_dummy) \ + ); \ + } while (0) -#if defined(ANOMALY_05000244) && defined (CONFIG_BLKFIN_CACHE) -#define idle_with_irq_disabled() do { \ - __asm__ __volatile__ ( \ - "nop; nop;\n" \ - ".align 8;\n" \ - "sti %0; idle;\n" \ - ::"d" (irq_flags)); \ -} while (0) +#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE) +# define NOP_PAD_ANOMALY_05000244 "nop; nop;" #else -#define idle_with_irq_disabled() do { \ - __asm__ __volatile__ ( \ - ".align 8;\n" \ - "sti %0; idle;\n" \ - ::"d" (irq_flags)); \ -} while (0) +# define NOP_PAD_ANOMALY_05000244 #endif +#define idle_with_irq_disabled() \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000244 \ + ".align 8;" \ + "sti %0;" \ + "idle;" \ + : \ + : "d" (irq_flags) \ + ) + #ifdef CONFIG_DEBUG_HWERR -#define __save_and_cli(x) do { \ - __asm__ __volatile__ ( \ - "cli %0;\n\tsti %1;" \ - :"=&d"(x): "d" (0x3F)); \ -} while (0) +# define __save_and_cli(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + "sti %1;" \ + : "=&d" (x) \ + : "d" (0x3F) \ + ) #else -#define __save_and_cli(x) do { \ - __asm__ __volatile__ ( \ - "cli %0;" \ - :"=&d"(x):); \ -} while (0) +# define __save_and_cli(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + : "=&d" (x) \ + ) #endif -#define local_save_flags(x) asm volatile ("cli %0;" \ - "sti %0;" \ - :"=d"(x):); +#define local_save_flags(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + "sti %0;" \ + : "=d" (x) \ + ) #ifdef CONFIG_DEBUG_HWERR #define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0) @@ -97,10 +105,11 @@ extern unsigned long irq_flags; #define irqs_enabled_from_flags(x) ((x) != 0x1f) #endif -#define local_irq_restore(x) do { \ - if (irqs_enabled_from_flags(x)) \ - local_irq_enable (); \ -} while (0) +#define local_irq_restore(x) \ + do { \ + if (irqs_enabled_from_flags(x)) \ + local_irq_enable(); \ + } while (0) /* For spinlocks etc */ #define local_irq_save(x) __save_and_cli(x) diff --git a/include/asm-blackfin/termbits.h b/include/asm-blackfin/termbits.h index 4eac38de8ce..f37feb7cf89 100644 --- a/include/asm-blackfin/termbits.h +++ b/include/asm-blackfin/termbits.h @@ -140,6 +140,7 @@ struct ktermios { #define HUPCL 0002000 #define CLOCAL 0004000 #define CBAUDEX 0010000 +#define BOTHER 0010000 #define B57600 0010001 #define B115200 0010002 #define B230400 0010003 @@ -155,10 +156,12 @@ struct ktermios { #define B3000000 0010015 #define B3500000 0010016 #define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CIBAUD 002003600000 /* input baud rate */ #define CMSPAR 010000000000 /* mark or space (stick) parity */ #define CRTSCTS 020000000000 /* flow control */ +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + /* c_lflag bits */ #define ISIG 0000001 #define ICANON 0000002 diff --git a/include/asm-blackfin/termios.h b/include/asm-blackfin/termios.h index 5c41478a51c..e31fe859650 100644 --- a/include/asm-blackfin/termios.h +++ b/include/asm-blackfin/termios.h @@ -98,8 +98,14 @@ struct termio { copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ }) -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) +#define user_termios_to_kernel_termios(k, u) \ + copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) \ + copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) \ + copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) \ + copy_to_user(u, k, sizeof(struct termios)) #endif /* __KERNEL__ */ diff --git a/include/asm-blackfin/trace.h b/include/asm-blackfin/trace.h index 9c2474c9a58..6313aace9d5 100644 --- a/include/asm-blackfin/trace.h +++ b/include/asm-blackfin/trace.h @@ -6,23 +6,46 @@ #ifndef _BLACKFIN_TRACE_ #define _BLACKFIN_TRACE_ +/* Normally, we use ON, but you can't turn on software expansion until + * interrupts subsystem is ready + */ + +#define BFIN_TRACE_INIT ((CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION << 4) | 0x03) +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND +#define BFIN_TRACE_ON (BFIN_TRACE_INIT | (CONFIG_DEBUG_BFIN_HWTRACE_EXPAND << 2)) +#else +#define BFIN_TRACE_ON (BFIN_TRACE_INIT) +#endif + #ifndef __ASSEMBLY__ +extern unsigned long trace_buff_offset; +extern unsigned long software_trace_buff[]; + /* Trace Macros for C files */ +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + #define trace_buffer_save(x) \ - do { \ - (x) = bfin_read_TBUFCTL(); \ - bfin_write_TBUFCTL((x) & ~TBUFEN); \ - } while (0) + do { \ + (x) = bfin_read_TBUFCTL(); \ + bfin_write_TBUFCTL((x) & ~TBUFEN); \ + } while (0) #define trace_buffer_restore(x) \ - do { \ - bfin_write_TBUFCTL((x)); \ - } while (0) + do { \ + bfin_write_TBUFCTL((x)); \ + } while (0) +#else /* DEBUG_BFIN_HWTRACE_ON */ + +#define trace_buffer_save(x) +#define trace_buffer_restore(x) +#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */ #else /* Trace Macros for Assembly files */ +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + #define TRACE_BUFFER_START(preg, dreg) trace_buffer_start(preg, dreg) #define TRACE_BUFFER_STOP(preg, dreg) trace_buffer_stop(preg, dreg) @@ -32,12 +55,26 @@ dreg = 0x1; \ [preg] = dreg; -#define trace_buffer_start(preg, dreg) \ +#define trace_buffer_start(preg, dreg) \ preg.L = LO(TBUFCTL); \ preg.H = HI(TBUFCTL); \ - dreg = 0x13; \ + dreg = BFIN_TRACE_ON; \ + [preg] = dreg; + +#define trace_buffer_init(preg, dreg) \ + preg.L = LO(TBUFCTL); \ + preg.H = HI(TBUFCTL); \ + dreg = BFIN_TRACE_INIT; \ [preg] = dreg; +#else /* CONFIG_DEBUG_BFIN_HWTRACE_ON */ + +#define trace_buffer_stop(preg, dreg) +#define trace_buffer_start(preg, dreg) +#define trace_buffer_init(preg, dreg) + +#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */ + #ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE # define DEBUG_START_HWTRACE(preg, dreg) trace_buffer_start(preg, dreg) # define DEBUG_STOP_HWTRACE(preg, dreg) trace_buffer_stop(preg, dreg) |