diff options
84 files changed, 3384 insertions, 4607 deletions
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index a83ff23cd68..0843ed0163a 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -1,89 +1,528 @@ rfkill - RF switch subsystem support ==================================== -1 Implementation details -2 Driver support -3 Userspace support +1 Introduction +2 Implementation details +3 Kernel driver guidelines +3.1 wireless device drivers +3.2 platform/switch drivers +3.3 input device drivers +4 Kernel API +5 Userspace support -=============================================================================== -1: Implementation details -The rfkill switch subsystem offers support for keys often found on laptops -to enable wireless devices like WiFi and Bluetooth. +1. Introduction: + +The rfkill switch subsystem exists to add a generic interface to circuitry that +can enable or disable the signal output of a wireless *transmitter* of any +type. By far, the most common use is to disable radio-frequency transmitters. -This is done by providing the user 3 possibilities: - 1 - The rfkill system handles all events; userspace is not aware of events. - 2 - The rfkill system handles all events; userspace is informed about the events. - 3 - The rfkill system does not handle events; userspace handles all events. +Note that disabling the signal output means that the the transmitter is to be +made to not emit any energy when "blocked". rfkill is not about blocking data +transmissions, it is about blocking energy emission. -The buttons to enable and disable the wireless radios are important in +The rfkill subsystem offers support for keys and switches often found on +laptops to enable wireless devices like WiFi and Bluetooth, so that these keys +and switches actually perform an action in all wireless devices of a given type +attached to the system. + +The buttons to enable and disable the wireless transmitters are important in situations where the user is for example using his laptop on a location where -wireless radios _must_ be disabled (e.g. airplanes). -Because of this requirement, userspace support for the keys should not be -made mandatory. Because userspace might want to perform some additional smarter -tasks when the key is pressed, rfkill still provides userspace the possibility -to take over the task to handle the key events. +radio-frequency transmitters _must_ be disabled (e.g. airplanes). + +Because of this requirement, userspace support for the keys should not be made +mandatory. Because userspace might want to perform some additional smarter +tasks when the key is pressed, rfkill provides userspace the possibility to +take over the task to handle the key events. + +=============================================================================== +2: Implementation details + +The rfkill subsystem is composed of various components: the rfkill class, the +rfkill-input module (an input layer handler), and some specific input layer +events. + +The rfkill class provides kernel drivers with an interface that allows them to +know when they should enable or disable a wireless network device transmitter. +This is enabled by the CONFIG_RFKILL Kconfig option. + +The rfkill class support makes sure userspace will be notified of all state +changes on rfkill devices through uevents. It provides a notification chain +for interested parties in the kernel to also get notified of rfkill state +changes in other drivers. It creates several sysfs entries which can be used +by userspace. See section "Userspace support". + +The rfkill-input module provides the kernel with the ability to implement a +basic response when the user presses a key or button (or toggles a switch) +related to rfkill functionality. It is an in-kernel implementation of default +policy of reacting to rfkill-related input events and neither mandatory nor +required for wireless drivers to operate. It is enabled by the +CONFIG_RFKILL_INPUT Kconfig option. + +rfkill-input is a rfkill-related events input layer handler. This handler will +listen to all rfkill key events and will change the rfkill state of the +wireless devices accordingly. With this option enabled userspace could either +do nothing or simply perform monitoring tasks. + +The rfkill-input module also provides EPO (emergency power-off) functionality +for all wireless transmitters. This function cannot be overridden, and it is +always active. rfkill EPO is related to *_RFKILL_ALL input layer events. + + +Important terms for the rfkill subsystem: + +In order to avoid confusion, we avoid the term "switch" in rfkill when it is +referring to an electronic control circuit that enables or disables a +transmitter. We reserve it for the physical device a human manipulates +(which is an input device, by the way): + +rfkill switch: + + A physical device a human manipulates. Its state can be perceived by + the kernel either directly (through a GPIO pin, ACPI GPE) or by its + effect on a rfkill line of a wireless device. + +rfkill controller: + + A hardware circuit that controls the state of a rfkill line, which a + kernel driver can interact with *to modify* that state (i.e. it has + either write-only or read/write access). + +rfkill line: + + An input channel (hardware or software) of a wireless device, which + causes a wireless transmitter to stop emitting energy (BLOCK) when it + is active. Point of view is extremely important here: rfkill lines are + always seen from the PoV of a wireless device (and its driver). + +soft rfkill line/software rfkill line: + + A rfkill line the wireless device driver can directly change the state + of. Related to rfkill_state RFKILL_STATE_SOFT_BLOCKED. + +hard rfkill line/hardware rfkill line: + + A rfkill line that works fully in hardware or firmware, and that cannot + be overridden by the kernel driver. The hardware device or the + firmware just exports its status to the driver, but it is read-only. + Related to rfkill_state RFKILL_STATE_HARD_BLOCKED. + +The enum rfkill_state describes the rfkill state of a transmitter: + +When a rfkill line or rfkill controller is in the RFKILL_STATE_UNBLOCKED state, +the wireless transmitter (radio TX circuit for example) is *enabled*. When the +it is in the RFKILL_STATE_SOFT_BLOCKED or RFKILL_STATE_HARD_BLOCKED, the +wireless transmitter is to be *blocked* from operating. + +RFKILL_STATE_SOFT_BLOCKED indicates that a call to toggle_radio() can change +that state. RFKILL_STATE_HARD_BLOCKED indicates that a call to toggle_radio() +will not be able to change the state and will return with a suitable error if +attempts are made to set the state to RFKILL_STATE_UNBLOCKED. + +RFKILL_STATE_HARD_BLOCKED is used by drivers to signal that the device is +locked in the BLOCKED state by a hardwire rfkill line (typically an input pin +that, when active, forces the transmitter to be disabled) which the driver +CANNOT override. + +Full rfkill functionality requires two different subsystems to cooperate: the +input layer and the rfkill class. The input layer issues *commands* to the +entire system requesting that devices registered to the rfkill class change +state. The way this interaction happens is not complex, but it is not obvious +either: + +Kernel Input layer: + + * Generates KEY_WWAN, KEY_WLAN, KEY_BLUETOOTH, SW_RFKILL_ALL, and + other such events when the user presses certain keys, buttons, or + toggles certain physical switches. + + THE INPUT LAYER IS NEVER USED TO PROPAGATE STATUS, NOTIFICATIONS OR THE + KIND OF STUFF AN ON-SCREEN-DISPLAY APPLICATION WOULD REPORT. It is + used to issue *commands* for the system to change behaviour, and these + commands may or may not be carried out by some kernel driver or + userspace application. It follows that doing user feedback based only + on input events is broken, as there is no guarantee that an input event + will be acted upon. + + Most wireless communication device drivers implementing rfkill + functionality MUST NOT generate these events, and have no reason to + register themselves with the input layer. Doing otherwise is a common + misconception. There is an API to propagate rfkill status change + information, and it is NOT the input layer. + +rfkill class: + + * Calls a hook in a driver to effectively change the wireless + transmitter state; + * Keeps track of the wireless transmitter state (with help from + the driver); + * Generates userspace notifications (uevents) and a call to a + notification chain (kernel) when there is a wireless transmitter + state change; + * Connects a wireless communications driver with the common rfkill + control system, which, for example, allows actions such as + "switch all bluetooth devices offline" to be carried out by + userspace or by rfkill-input. + + THE RFKILL CLASS NEVER ISSUES INPUT EVENTS. THE RFKILL CLASS DOES + NOT LISTEN TO INPUT EVENTS. NO DRIVER USING THE RFKILL CLASS SHALL + EVER LISTEN TO, OR ACT ON RFKILL INPUT EVENTS. Doing otherwise is + a layering violation. + + Most wireless data communication drivers in the kernel have just to + implement the rfkill class API to work properly. Interfacing to the + input layer is not often required (and is very often a *bug*) on + wireless drivers. + + Platform drivers often have to attach to the input layer to *issue* + (but never to listen to) rfkill events for rfkill switches, and also to + the rfkill class to export a control interface for the platform rfkill + controllers to the rfkill subsystem. This does NOT mean the rfkill + switch is attached to a rfkill class (doing so is almost always wrong). + It just means the same kernel module is the driver for different + devices (rfkill switches and rfkill controllers). + + +Userspace input handlers (uevents) or kernel input handlers (rfkill-input): + + * Implements the policy of what should happen when one of the input + layer events related to rfkill operation is received. + * Uses the sysfs interface (userspace) or private rfkill API calls + to tell the devices registered with the rfkill class to change + their state (i.e. translates the input layer event into real + action). + * rfkill-input implements EPO by handling EV_SW SW_RFKILL_ALL 0 + (power off all transmitters) in a special way: it ignores any + overrides and local state cache and forces all transmitters to the + RFKILL_STATE_SOFT_BLOCKED state (including those which are already + supposed to be BLOCKED). Note that the opposite event (power on all + transmitters) is handled normally. + +Userspace uevent handler or kernel platform-specific drivers hooked to the +rfkill notifier chain: + + * Taps into the rfkill notifier chain or to KOBJ_CHANGE uevents, + in order to know when a device that is registered with the rfkill + class changes state; + * Issues feedback notifications to the user; + * In the rare platforms where this is required, synthesizes an input + event to command all *OTHER* rfkill devices to also change their + statues when a specific rfkill device changes state. + + +=============================================================================== +3: Kernel driver guidelines + +Remember: point-of-view is everything for a driver that connects to the rfkill +subsystem. All the details below must be measured/perceived from the point of +view of the specific driver being modified. + +The first thing one needs to know is whether his driver should be talking to +the rfkill class or to the input layer. In rare cases (platform drivers), it +could happen that you need to do both, as platform drivers often handle a +variety of devices in the same driver. + +Do not mistake input devices for rfkill controllers. The only type of "rfkill +switch" device that is to be registered with the rfkill class are those +directly controlling the circuits that cause a wireless transmitter to stop +working (or the software equivalent of them), i.e. what we call a rfkill +controller. Every other kind of "rfkill switch" is just an input device and +MUST NOT be registered with the rfkill class. + +A driver should register a device with the rfkill class when ALL of the +following conditions are met (they define a rfkill controller): + +1. The device is/controls a data communications wireless transmitter; + +2. The kernel can interact with the hardware/firmware to CHANGE the wireless + transmitter state (block/unblock TX operation); + +3. The transmitter can be made to not emit any energy when "blocked": + rfkill is not about blocking data transmissions, it is about blocking + energy emission; + +A driver should register a device with the input subsystem to issue +rfkill-related events (KEY_WLAN, KEY_BLUETOOTH, KEY_WWAN, KEY_WIMAX, +SW_RFKILL_ALL, etc) when ALL of the folowing conditions are met: + +1. It is directly related to some physical device the user interacts with, to + command the O.S./firmware/hardware to enable/disable a data communications + wireless transmitter. + + Examples of the physical device are: buttons, keys and switches the user + will press/touch/slide/switch to enable or disable the wireless + communication device. + +2. It is NOT slaved to another device, i.e. there is no other device that + issues rfkill-related input events in preference to this one. -The system inside the kernel has been split into 2 separate sections: - 1 - RFKILL - 2 - RFKILL_INPUT + Please refer to the corner cases and examples section for more details. -The first option enables rfkill support and will make sure userspace will -be notified of any events through the input device. It also creates several -sysfs entries which can be used by userspace. See section "Userspace support". +When in doubt, do not issue input events. For drivers that should generate +input events in some platforms, but not in others (e.g. b43), the best solution +is to NEVER generate input events in the first place. That work should be +deferred to a platform-specific kernel module (which will know when to generate +events through the rfkill notifier chain) or to userspace. This avoids the +usual maintenance problems with DMI whitelisting. -The second option provides an rfkill input handler. This handler will -listen to all rfkill key events and will toggle the radio accordingly. -With this option enabled userspace could either do nothing or simply -perform monitoring tasks. +Corner cases and examples: ==================================== -2: Driver support -To build a driver with rfkill subsystem support, the driver should -depend on the Kconfig symbol RFKILL; it should _not_ depend on -RKFILL_INPUT. +1. If the device is an input device that, because of hardware or firmware, +causes wireless transmitters to be blocked regardless of the kernel's will, it +is still just an input device, and NOT to be registered with the rfkill class. -Unless key events trigger an interrupt to which the driver listens, polling -will be required to determine the key state changes. For this the input -layer providers the input-polldev handler. +2. If the wireless transmitter switch control is read-only, it is an input +device and not to be registered with the rfkill class (and maybe not to be made +an input layer event source either, see below). -A driver should implement a few steps to correctly make use of the -rfkill subsystem. First for non-polling drivers: +3. If there is some other device driver *closer* to the actual hardware the +user interacted with (the button/switch/key) to issue an input event, THAT is +the device driver that should be issuing input events. - - rfkill_allocate() - - input_allocate_device() - - rfkill_register() - - input_register_device() +E.g: + [RFKILL slider switch] -- [GPIO hardware] -- [WLAN card rf-kill input] + (platform driver) (wireless card driver) + +The user is closer to the RFKILL slide switch plaform driver, so the driver +which must issue input events is the platform driver looking at the GPIO +hardware, and NEVER the wireless card driver (which is just a slave). It is +very likely that there are other leaves than just the WLAN card rf-kill input +(e.g. a bluetooth card, etc)... + +On the other hand, some embedded devices do this: + + [RFKILL slider switch] -- [WLAN card rf-kill input] + (wireless card driver) + +In this situation, the wireless card driver *could* register itself as an input +device and issue rf-kill related input events... but in order to AVOID the need +for DMI whitelisting, the wireless card driver does NOT do it. Userspace (HAL) +or a platform driver (that exists only on these embedded devices) will do the +dirty job of issuing the input events. + + +COMMON MISTAKES in kernel drivers, related to rfkill: +==================================== + +1. NEVER confuse input device keys and buttons with input device switches. + + 1a. Switches are always set or reset. They report the current state + (on position or off position). + + 1b. Keys and buttons are either in the pressed or not-pressed state, and + that's it. A "button" that latches down when you press it, and + unlatches when you press it again is in fact a switch as far as input + devices go. + +Add the SW_* events you need for switches, do NOT try to emulate a button using +KEY_* events just because there is no such SW_* event yet. Do NOT try to use, +for example, KEY_BLUETOOTH when you should be using SW_BLUETOOTH instead. + +2. Input device switches (sources of EV_SW events) DO store their current state +(so you *must* initialize it by issuing a gratuitous input layer event on +driver start-up and also when resuming from sleep), and that state CAN be +queried from userspace through IOCTLs. There is no sysfs interface for this, +but that doesn't mean you should break things trying to hook it to the rfkill +class to get a sysfs interface :-) + +3. Do not issue *_RFKILL_ALL events by default, unless you are sure it is the +correct event for your switch/button. These events are emergency power-off +events when they are trying to turn the transmitters off. An example of an +input device which SHOULD generate *_RFKILL_ALL events is the wireless-kill +switch in a laptop which is NOT a hotkey, but a real switch that kills radios +in hardware, even if the O.S. has gone to lunch. An example of an input device +which SHOULD NOT generate *_RFKILL_ALL events by default, is any sort of hot +key that does nothing by itself, as well as any hot key that is type-specific +(e.g. the one for WLAN). + + +3.1 Guidelines for wireless device drivers +------------------------------------------ + +1. Each independent transmitter in a wireless device (usually there is only one +transmitter per device) should have a SINGLE rfkill class attached to it. + +2. If the device does not have any sort of hardware assistance to allow the +driver to rfkill the device, the driver should emulate it by taking all actions +required to silence the transmitter. + +3. If it is impossible to silence the transmitter (i.e. it still emits energy, +even if it is just in brief pulses, when there is no data to transmit and there +is no hardware support to turn it off) do NOT lie to the users. Do not attach +it to a rfkill class. The rfkill subsystem does not deal with data +transmission, it deals with energy emission. If the transmitter is emitting +energy, it is not blocked in rfkill terms. + +4. It doesn't matter if the device has multiple rfkill input lines affecting +the same transmitter, their combined state is to be exported as a single state +per transmitter (see rule 1). + +This rule exists because users of the rfkill subsystem expect to get (and set, +when possible) the overall transmitter rfkill state, not of a particular rfkill +line. + +Example of a WLAN wireless driver connected to the rfkill subsystem: +-------------------------------------------------------------------- + +A certain WLAN card has one input pin that causes it to block the transmitter +and makes the status of that input pin available (only for reading!) to the +kernel driver. This is a hard rfkill input line (it cannot be overridden by +the kernel driver). + +The card also has one PCI register that, if manipulated by the driver, causes +it to block the transmitter. This is a soft rfkill input line. + +It has also a thermal protection circuitry that shuts down its transmitter if +the card overheats, and makes the status of that protection available (only for +reading!) to the kernel driver. This is also a hard rfkill input line. + +If either one of these rfkill lines are active, the transmitter is blocked by +the hardware and forced offline. + +The driver should allocate and attach to its struct device *ONE* instance of +the rfkill class (there is only one transmitter). + +It can implement the get_state() hook, and return RFKILL_STATE_HARD_BLOCKED if +either one of its two hard rfkill input lines are active. If the two hard +rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft +rfkill input line is active. Only if none of the rfkill input lines are +active, will it return RFKILL_STATE_UNBLOCKED. -For polling drivers: +If it doesn't implement the get_state() hook, it must make sure that its calls +to rfkill_force_state() are enough to keep the status always up-to-date, and it +must do a rfkill_force_state() on resume from sleep. +Every time the driver gets a notification from the card that one of its rfkill +lines changed state (polling might be needed on badly designed cards that don't +generate interrupts for such events), it recomputes the rfkill state as per +above, and calls rfkill_force_state() to update it. + +The driver should implement the toggle_radio() hook, that: + +1. Returns an error if one of the hardware rfkill lines are active, and the +caller asked for RFKILL_STATE_UNBLOCKED. + +2. Activates the soft rfkill line if the caller asked for state +RFKILL_STATE_SOFT_BLOCKED. It should do this even if one of the hard rfkill +lines are active, effectively double-blocking the transmitter. + +3. Deactivates the soft rfkill line if none of the hardware rfkill lines are +active and the caller asked for RFKILL_STATE_UNBLOCKED. + +=============================================================================== +4: Kernel API + +To build a driver with rfkill subsystem support, the driver should depend on +(or select) the Kconfig symbol RFKILL; it should _not_ depend on RKFILL_INPUT. + +The hardware the driver talks to may be write-only (where the current state +of the hardware is unknown), or read-write (where the hardware can be queried +about its current state). + +The rfkill class will call the get_state hook of a device every time it needs +to know the *real* current state of the hardware. This can happen often. + +Some hardware provides events when its status changes. In these cases, it is +best for the driver to not provide a get_state hook, and instead register the +rfkill class *already* with the correct status, and keep it updated using +rfkill_force_state() when it gets an event from the hardware. + +There is no provision for a statically-allocated rfkill struct. You must +use rfkill_allocate() to allocate one. + +You should: - rfkill_allocate() - - input_allocate_polled_device() + - modify rfkill fields (flags, name) + - modify state to the current hardware state (THIS IS THE ONLY TIME + YOU CAN ACCESS state DIRECTLY) - rfkill_register() - - input_register_polled_device() -When a key event has been detected, the correct event should be -sent over the input device which has been registered by the driver. +The only way to set a device to the RFKILL_STATE_HARD_BLOCKED state is through +a suitable return of get_state() or through rfkill_force_state(). -==================================== -3: Userspace support +When a device is in the RFKILL_STATE_HARD_BLOCKED state, the only way to switch +it to a different state is through a suitable return of get_state() or through +rfkill_force_state(). + +If toggle_radio() is called to set a device to state RFKILL_STATE_SOFT_BLOCKED +when that device is already at the RFKILL_STATE_HARD_BLOCKED state, it should +not return an error. Instead, it should try to double-block the transmitter, +so that its state will change from RFKILL_STATE_HARD_BLOCKED to +RFKILL_STATE_SOFT_BLOCKED should the hardware blocking cease. -For each key an input device will be created which will send out the correct -key event when the rfkill key has been pressed. +Please refer to the source for more documentation. + +=============================================================================== +5: Userspace support + +rfkill devices issue uevents (with an action of "change"), with the following +environment variables set: + +RFKILL_NAME +RFKILL_STATE +RFKILL_TYPE + +The ABI for these variables is defined by the sysfs attributes. It is best +to take a quick look at the source to make sure of the possible values. + +It is expected that HAL will trap those, and bridge them to DBUS, etc. These +events CAN and SHOULD be used to give feedback to the user about the rfkill +status of the system. + +Input devices may issue events that are related to rfkill. These are the +various KEY_* events and SW_* events supported by rfkill-input.c. + +******IMPORTANT****** +When rfkill-input is ACTIVE, userspace is NOT TO CHANGE THE STATE OF AN RFKILL +SWITCH IN RESPONSE TO AN INPUT EVENT also handled by rfkill-input, unless it +has set to true the user_claim attribute for that particular switch. This rule +is *absolute*; do NOT violate it. +******IMPORTANT****** + +Userspace must not assume it is the only source of control for rfkill switches. +Their state CAN and WILL change due to firmware actions, direct user actions, +and the rfkill-input EPO override for *_RFKILL_ALL. + +When rfkill-input is not active, userspace must initiate a rfkill status +change by writing to the "state" attribute in order for anything to happen. + +Take particular care to implement EV_SW SW_RFKILL_ALL properly. When that +switch is set to OFF, *every* rfkill device *MUST* be immediately put into the +RFKILL_STATE_SOFT_BLOCKED state, no questions asked. The following sysfs entries will be created: name: Name assigned by driver to this key (interface or driver name). type: Name of the key type ("wlan", "bluetooth", etc). - state: Current state of the key. 1: On, 0: Off. + state: Current state of the transmitter + 0: RFKILL_STATE_SOFT_BLOCKED + transmitter is forced off, but one can override it + by a write to the state attribute; + 1: RFKILL_STATE_UNBLOCKED + transmiter is NOT forced off, and may operate if + all other conditions for such operation are met + (such as interface is up and configured, etc); + 2: RFKILL_STATE_HARD_BLOCKED + transmitter is forced off by something outside of + the driver's control. One cannot set a device to + this state through writes to the state attribute; claim: 1: Userspace handles events, 0: Kernel handles events Both the "state" and "claim" entries are also writable. For the "state" entry -this means that when 1 or 0 is written all radios, not yet in the requested -state, will be will be toggled accordingly. +this means that when 1 or 0 is written, the device rfkill state (if not yet in +the requested state), will be will be toggled accordingly. + For the "claim" entry writing 1 to it means that the kernel no longer handles key events even though RFKILL_INPUT input was enabled. When "claim" has been set to 0, userspace should make sure that it listens for the input events or -check the sysfs "state" entry regularly to correctly perform the required -tasks when the rkfill key is pressed. +check the sysfs "state" entry regularly to correctly perform the required tasks +when the rkfill key is pressed. + +A note about input devices and EV_SW events: + +In order to know the current state of an input device switch (like +SW_RFKILL_ALL), you will need to use an IOCTL. That information is not +available through sysfs in a generic way at this time, and it is not available +through the rfkill class AT ALL. diff --git a/MAINTAINERS b/MAINTAINERS index d0ea6ec2552..5ae19d502e0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3854,10 +3854,6 @@ P: Ion Badulescu M: ionut@cs.columbia.edu S: Maintained -STARMODE RADIO IP (STRIP) PROTOCOL DRIVER -W: http://mosquitonet.Stanford.EDU/strip.html -S: Unsupported ? - STRADIS MPEG-2 DECODER DRIVER P: Nathan Laredo M: laredo@gnu.org diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 59dce6aa086..c3bda5ce67c 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -148,9 +148,9 @@ static inline void b44_sync_dma_desc_for_device(struct ssb_device *sdev, unsigned long offset, enum dma_data_direction dir) { - dma_sync_single_range_for_device(sdev->dma_dev, dma_base, - offset & dma_desc_align_mask, - dma_desc_sync_size, dir); + ssb_dma_sync_single_range_for_device(sdev, dma_base, + offset & dma_desc_align_mask, + dma_desc_sync_size, dir); } static inline void b44_sync_dma_desc_for_cpu(struct ssb_device *sdev, @@ -158,9 +158,9 @@ static inline void b44_sync_dma_desc_for_cpu(struct ssb_device *sdev, unsigned long offset, enum dma_data_direction dir) { - dma_sync_single_range_for_cpu(sdev->dma_dev, dma_base, - offset & dma_desc_align_mask, - dma_desc_sync_size, dir); + ssb_dma_sync_single_range_for_cpu(sdev, dma_base, + offset & dma_desc_align_mask, + dma_desc_sync_size, dir); } static inline unsigned long br32(const struct b44 *bp, unsigned long reg) @@ -613,10 +613,10 @@ static void b44_tx(struct b44 *bp) BUG_ON(skb == NULL); - dma_unmap_single(bp->sdev->dma_dev, - rp->mapping, - skb->len, - DMA_TO_DEVICE); + ssb_dma_unmap_single(bp->sdev, + rp->mapping, + skb->len, + DMA_TO_DEVICE); rp->skb = NULL; dev_kfree_skb_irq(skb); } @@ -653,29 +653,29 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) if (skb == NULL) return -ENOMEM; - mapping = dma_map_single(bp->sdev->dma_dev, skb->data, - RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); + mapping = ssb_dma_map_single(bp->sdev, skb->data, + RX_PKT_BUF_SZ, + DMA_FROM_DEVICE); /* Hardware bug work-around, the chip is unable to do PCI DMA to/from anything above 1GB :-( */ - if (dma_mapping_error(mapping) || + if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) { /* Sigh... */ - if (!dma_mapping_error(mapping)) - dma_unmap_single(bp->sdev->dma_dev, mapping, - RX_PKT_BUF_SZ, DMA_FROM_DEVICE); + if (!ssb_dma_mapping_error(bp->sdev, mapping)) + ssb_dma_unmap_single(bp->sdev, mapping, + RX_PKT_BUF_SZ, DMA_FROM_DEVICE); dev_kfree_skb_any(skb); skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA); if (skb == NULL) return -ENOMEM; - mapping = dma_map_single(bp->sdev->dma_dev, skb->data, - RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); - if (dma_mapping_error(mapping) || + mapping = ssb_dma_map_single(bp->sdev, skb->data, + RX_PKT_BUF_SZ, + DMA_FROM_DEVICE); + if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) { - if (!dma_mapping_error(mapping)) - dma_unmap_single(bp->sdev->dma_dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); + if (!ssb_dma_mapping_error(bp->sdev, mapping)) + ssb_dma_unmap_single(bp->sdev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); dev_kfree_skb_any(skb); return -ENOMEM; } @@ -750,9 +750,9 @@ static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) dest_idx * sizeof(dest_desc), DMA_BIDIRECTIONAL); - dma_sync_single_for_device(bp->sdev->dma_dev, le32_to_cpu(src_desc->addr), - RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); + ssb_dma_sync_single_for_device(bp->sdev, le32_to_cpu(src_desc->addr), + RX_PKT_BUF_SZ, + DMA_FROM_DEVICE); } static int b44_rx(struct b44 *bp, int budget) @@ -772,7 +772,7 @@ static int b44_rx(struct b44 *bp, int budget) struct rx_header *rh; u16 len; - dma_sync_single_for_cpu(bp->sdev->dma_dev, map, + ssb_dma_sync_single_for_cpu(bp->sdev, map, RX_PKT_BUF_SZ, DMA_FROM_DEVICE); rh = (struct rx_header *) skb->data; @@ -806,8 +806,8 @@ static int b44_rx(struct b44 *bp, int budget) skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod); if (skb_size < 0) goto drop_it; - dma_unmap_single(bp->sdev->dma_dev, map, - skb_size, DMA_FROM_DEVICE); + ssb_dma_unmap_single(bp->sdev, map, + skb_size, DMA_FROM_DEVICE); /* Leave out rx_header */ skb_put(skb, len + RX_PKT_OFFSET); skb_pull(skb, RX_PKT_OFFSET); @@ -966,25 +966,25 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) goto err_out; } - mapping = dma_map_single(bp->sdev->dma_dev, skb->data, len, DMA_TO_DEVICE); - if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) { + mapping = ssb_dma_map_single(bp->sdev, skb->data, len, DMA_TO_DEVICE); + if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_30BIT_MASK) { struct sk_buff *bounce_skb; /* Chip can't handle DMA to/from >1GB, use bounce buffer */ - if (!dma_mapping_error(mapping)) - dma_unmap_single(bp->sdev->dma_dev, mapping, len, - DMA_TO_DEVICE); + if (!ssb_dma_mapping_error(bp->sdev, mapping)) + ssb_dma_unmap_single(bp->sdev, mapping, len, + DMA_TO_DEVICE); bounce_skb = __dev_alloc_skb(len, GFP_ATOMIC | GFP_DMA); if (!bounce_skb) goto err_out; - mapping = dma_map_single(bp->sdev->dma_dev, bounce_skb->data, - len, DMA_TO_DEVICE); - if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) { - if (!dma_mapping_error(mapping)) - dma_unmap_single(bp->sdev->dma_dev, mapping, - len, DMA_TO_DEVICE); + mapping = ssb_dma_map_single(bp->sdev, bounce_skb->data, + len, DMA_TO_DEVICE); + if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_30BIT_MASK) { + if (!ssb_dma_mapping_error(bp->sdev, mapping)) + ssb_dma_unmap_single(bp->sdev, mapping, + len, DMA_TO_DEVICE); dev_kfree_skb_any(bounce_skb); goto err_out; } @@ -1082,8 +1082,8 @@ static void b44_free_rings(struct b44 *bp) if (rp->skb == NULL) continue; - dma_unmap_single(bp->sdev->dma_dev, rp->mapping, RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); + ssb_dma_unmap_single(bp->sdev, rp->mapping, RX_PKT_BUF_SZ, + DMA_FROM_DEVICE); dev_kfree_skb_any(rp->skb); rp->skb = NULL; } @@ -1094,8 +1094,8 @@ static void b44_free_rings(struct b44 *bp) if (rp->skb == NULL) continue; - dma_unmap_single(bp->sdev->dma_dev, rp->mapping, rp->skb->len, - DMA_TO_DEVICE); + ssb_dma_unmap_single(bp->sdev, rp->mapping, rp->skb->len, + DMA_TO_DEVICE); dev_kfree_skb_any(rp->skb); rp->skb = NULL; } @@ -1117,14 +1117,14 @@ static void b44_init_rings(struct b44 *bp) memset(bp->tx_ring, 0, B44_TX_RING_BYTES); if (bp->flags & B44_FLAG_RX_RING_HACK) - dma_sync_single_for_device(bp->sdev->dma_dev, bp->rx_ring_dma, - DMA_TABLE_BYTES, - DMA_BIDIRECTIONAL); + ssb_dma_sync_single_for_device(bp->sdev, bp->rx_ring_dma, + DMA_TABLE_BYTES, + DMA_BIDIRECTIONAL); if (bp->flags & B44_FLAG_TX_RING_HACK) - dma_sync_single_for_device(bp->sdev->dma_dev, bp->tx_ring_dma, - DMA_TABLE_BYTES, - DMA_TO_DEVICE); + ssb_dma_sync_single_for_device(bp->sdev, bp->tx_ring_dma, + DMA_TABLE_BYTES, + DMA_TO_DEVICE); for (i = 0; i < bp->rx_pending; i++) { if (b44_alloc_rx_skb(bp, -1, i) < 0) @@ -1144,25 +1144,27 @@ static void b44_free_consistent(struct b44 *bp) bp->tx_buffers = NULL; if (bp->rx_ring) { if (bp->flags & B44_FLAG_RX_RING_HACK) { - dma_unmap_single(bp->sdev->dma_dev, bp->rx_ring_dma, - DMA_TABLE_BYTES, - DMA_BIDIRECTIONAL); + ssb_dma_unmap_single(bp->sdev, bp->rx_ring_dma, + DMA_TABLE_BYTES, + DMA_BIDIRECTIONAL); kfree(bp->rx_ring); } else - dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES, - bp->rx_ring, bp->rx_ring_dma); + ssb_dma_free_consistent(bp->sdev, DMA_TABLE_BYTES, + bp->rx_ring, bp->rx_ring_dma, + GFP_KERNEL); bp->rx_ring = NULL; bp->flags &= ~B44_FLAG_RX_RING_HACK; } if (bp->tx_ring) { if (bp->flags & B44_FLAG_TX_RING_HACK) { - dma_unmap_single(bp->sdev->dma_dev, bp->tx_ring_dma, - DMA_TABLE_BYTES, - DMA_TO_DEVICE); + ssb_dma_unmap_single(bp->sdev, bp->tx_ring_dma, + DMA_TABLE_BYTES, + DMA_TO_DEVICE); kfree(bp->tx_ring); } else - dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES, - bp->tx_ring, bp->tx_ring_dma); + ssb_dma_free_consistent(bp->sdev, DMA_TABLE_BYTES, + bp->tx_ring, bp->tx_ring_dma, + GFP_KERNEL); bp->tx_ring = NULL; bp->flags &= ~B44_FLAG_TX_RING_HACK; } @@ -1187,7 +1189,7 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp) goto out_err; size = DMA_TABLE_BYTES; - bp->rx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size, &bp->rx_ring_dma, gfp); + bp->rx_ring = ssb_dma_alloc_consistent(bp->sdev, size, &bp->rx_ring_dma, gfp); if (!bp->rx_ring) { /* Allocation may have failed due to pci_alloc_consistent insisting on use of GFP_DMA, which is more restrictive @@ -1199,11 +1201,11 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp) if (!rx_ring) goto out_err; - rx_ring_dma = dma_map_single(bp->sdev->dma_dev, rx_ring, - DMA_TABLE_BYTES, - DMA_BIDIRECTIONAL); + rx_ring_dma = ssb_dma_map_single(bp->sdev, rx_ring, + DMA_TABLE_BYTES, + DMA_BIDIRECTIONAL); - if (dma_mapping_error(rx_ring_dma) || + if (ssb_dma_mapping_error(bp->sdev, rx_ring_dma) || rx_ring_dma + size > DMA_30BIT_MASK) { kfree(rx_ring); goto out_err; @@ -1214,9 +1216,9 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp) bp->flags |= B44_FLAG_RX_RING_HACK; } - bp->tx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size, &bp->tx_ring_dma, gfp); + bp->tx_ring = ssb_dma_alloc_consistent(bp->sdev, size, &bp->tx_ring_dma, gfp); if (!bp->tx_ring) { - /* Allocation may have failed due to dma_alloc_coherent + /* Allocation may have failed due to ssb_dma_alloc_consistent insisting on use of GFP_DMA, which is more restrictive than necessary... */ struct dma_desc *tx_ring; @@ -1226,11 +1228,11 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp) if (!tx_ring) goto out_err; - tx_ring_dma = dma_map_single(bp->sdev->dma_dev, tx_ring, + tx_ring_dma = ssb_dma_map_single(bp->sdev, tx_ring, DMA_TABLE_BYTES, DMA_TO_DEVICE); - if (dma_mapping_error(tx_ring_dma) || + if (ssb_dma_mapping_error(bp->sdev, tx_ring_dma) || tx_ring_dma + size > DMA_30BIT_MASK) { kfree(tx_ring); goto out_err; diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index aa963ac1e37..6b2dee0cf3a 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -571,6 +571,7 @@ static void gelic_wl_parse_ie(u8 *data, size_t len, * independent format */ static char *gelic_wl_translate_scan(struct net_device *netdev, + struct iw_request_info *info, char *ev, char *stop, struct gelic_wl_scan_info *network) @@ -588,26 +589,26 @@ static char *gelic_wl_translate_scan(struct net_device *netdev, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, &scan->bssid[2], ETH_ALEN); - ev = iwe_stream_add_event(ev, stop, &iwe, IW_EV_ADDR_LEN); + ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_ADDR_LEN); /* ESSID */ iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; iwe.u.data.length = strnlen(scan->essid, 32); - ev = iwe_stream_add_point(ev, stop, &iwe, scan->essid); + ev = iwe_stream_add_point(info, ev, stop, &iwe, scan->essid); /* FREQUENCY */ iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = be16_to_cpu(scan->channel); iwe.u.freq.e = 0; /* table value in MHz */ iwe.u.freq.i = 0; - ev = iwe_stream_add_event(ev, stop, &iwe, IW_EV_FREQ_LEN); + ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_FREQ_LEN); /* RATES */ iwe.cmd = SIOCGIWRATE; iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; /* to stuff multiple values in one event */ - tmp = ev + IW_EV_LCP_LEN; + tmp = ev + iwe_stream_lcp_len(info); /* put them in ascendant order (older is first) */ i = 0; j = 0; @@ -620,16 +621,16 @@ static char *gelic_wl_translate_scan(struct net_device *netdev, else rate = scan->rate[i++] & 0x7f; iwe.u.bitrate.value = rate * 500000; /* 500kbps unit */ - tmp = iwe_stream_add_value(ev, tmp, stop, &iwe, + tmp = iwe_stream_add_value(info, ev, tmp, stop, &iwe, IW_EV_PARAM_LEN); } while (j < network->rate_ext_len) { iwe.u.bitrate.value = (scan->ext_rate[j++] & 0x7f) * 500000; - tmp = iwe_stream_add_value(ev, tmp, stop, &iwe, + tmp = iwe_stream_add_value(info, ev, tmp, stop, &iwe, IW_EV_PARAM_LEN); } /* Check if we added any rate */ - if (IW_EV_LCP_LEN < (tmp - ev)) + if (iwe_stream_lcp_len(info) < (tmp - ev)) ev = tmp; /* ENCODE */ @@ -639,7 +640,7 @@ static char *gelic_wl_translate_scan(struct net_device *netdev, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - ev = iwe_stream_add_point(ev, stop, &iwe, scan->essid); + ev = iwe_stream_add_point(info, ev, stop, &iwe, scan->essid); /* MODE */ iwe.cmd = SIOCGIWMODE; @@ -649,7 +650,7 @@ static char *gelic_wl_translate_scan(struct net_device *netdev, iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; - ev = iwe_stream_add_event(ev, stop, &iwe, IW_EV_UINT_LEN); + ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_UINT_LEN); } /* QUAL */ @@ -659,7 +660,7 @@ static char *gelic_wl_translate_scan(struct net_device *netdev, iwe.u.qual.level = be16_to_cpu(scan->rssi); iwe.u.qual.qual = be16_to_cpu(scan->rssi); iwe.u.qual.noise = 0; - ev = iwe_stream_add_event(ev, stop, &iwe, IW_EV_QUAL_LEN); + ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_QUAL_LEN); /* RSN */ memset(&iwe, 0, sizeof(iwe)); @@ -669,7 +670,7 @@ static char *gelic_wl_translate_scan(struct net_device *netdev, if (len) { iwe.cmd = IWEVGENIE; iwe.u.data.length = len; - ev = iwe_stream_add_point(ev, stop, &iwe, buf); + ev = iwe_stream_add_point(info, ev, stop, &iwe, buf); } } else { /* this scan info has IE data */ @@ -684,7 +685,7 @@ static char *gelic_wl_translate_scan(struct net_device *netdev, memcpy(buf, ie_info.wpa.data, ie_info.wpa.len); iwe.cmd = IWEVGENIE; iwe.u.data.length = ie_info.wpa.len; - ev = iwe_stream_add_point(ev, stop, &iwe, buf); + ev = iwe_stream_add_point(info, ev, stop, &iwe, buf); } if (ie_info.rsn.len && (ie_info.rsn.len <= sizeof(buf))) { @@ -692,7 +693,7 @@ static char *gelic_wl_translate_scan(struct net_device *netdev, memcpy(buf, ie_info.rsn.data, ie_info.rsn.len); iwe.cmd = IWEVGENIE; iwe.u.data.length = ie_info.rsn.len; - ev = iwe_stream_add_point(ev, stop, &iwe, buf); + ev = iwe_stream_add_point(info, ev, stop, &iwe, buf); } } @@ -737,7 +738,8 @@ static int gelic_wl_get_scan(struct net_device *netdev, if (wl->scan_age == 0 || time_after(scan_info->last_scanned + wl->scan_age, this_time)) - ev = gelic_wl_translate_scan(netdev, ev, stop, + ev = gelic_wl_translate_scan(netdev, info, + ev, stop, scan_info); else pr_debug("%s:entry too old\n", __func__); diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 22e1e9a1fb7..865f2980c27 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -14,30 +14,6 @@ config WLAN_PRE80211 This option does not affect the kernel build, it only lets you choose drivers. -config STRIP - tristate "STRIP (Metricom starmode radio IP)" - depends on INET && WLAN_PRE80211 - select WIRELESS_EXT - ---help--- - Say Y if you have a Metricom radio and intend to use Starmode Radio - IP. STRIP is a radio protocol developed for the MosquitoNet project - (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet - traffic using Metricom radios. Metricom radios are small, battery - powered, 100kbit/sec packet radio transceivers, about the size and - weight of a cellular telephone. (You may also have heard them called - "Metricom modems" but we avoid the term "modem" because it misleads - many people into thinking that you can plug a Metricom modem into a - phone line and use it as a modem.) - - You can use STRIP on any Linux machine with a serial port, although - it is obviously most useful for people with laptop computers. If you - think you might get a Metricom radio in the future, there is no harm - in saying Y to STRIP now, except that it makes the kernel a bit - bigger. - - To compile this as a module, choose M here: the module will be - called strip. - config ARLAN tristate "Aironet Arlan 655 & IC2200 DS support" depends on ISA && !64BIT && WLAN_PRE80211 diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 54a4f6f1db6..2668934abbf 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -6,7 +6,6 @@ obj-$(CONFIG_IPW2100) += ipw2100.o obj-$(CONFIG_IPW2200) += ipw2200.o -obj-$(CONFIG_STRIP) += strip.o obj-$(CONFIG_ARLAN) += arlan.o arlan-objs := arlan-main.o arlan-proc.o diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index 0ba55ba9395..3333d4596b8 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -1685,7 +1685,6 @@ static void adm8211_tx_raw(struct ieee80211_hw *dev, struct sk_buff *skb, static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) { struct adm8211_tx_hdr *txhdr; - u16 fc; size_t payload_len, hdrlen; int plcp, dur, len, plcp_signal, short_preamble; struct ieee80211_hdr *hdr; @@ -1696,8 +1695,7 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) plcp_signal = txrate->bitrate; hdr = (struct ieee80211_hdr *)skb->data; - fc = le16_to_cpu(hdr->frame_control) & ~IEEE80211_FCTL_PROTECTED; - hdrlen = ieee80211_get_hdrlen(fc); + hdrlen = ieee80211_hdrlen(hdr->frame_control); memcpy(skb->cb, skb->data, hdrlen); hdr = (struct ieee80211_hdr *)skb->cb; skb_pull(skb, hdrlen); @@ -1711,8 +1709,6 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) txhdr->frame_control = hdr->frame_control; len = hdrlen + payload_len + FCS_LEN; - if (fc & IEEE80211_FCTL_PROTECTED) - len += 8; txhdr->frag = cpu_to_le16(0x0FFF); adm8211_calc_durations(&dur, &plcp, payload_len, @@ -1730,9 +1726,6 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS); - if (fc & IEEE80211_FCTL_PROTECTED) - txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_WEP_ENGINE); - txhdr->retry_limit = info->control.retry_limit; adm8211_tx_raw(dev, skb, plcp_signal, hdrlen); diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index e30f8b79ea8..b5cd850a4a5 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -85,10 +85,10 @@ static struct pci_driver airo_driver = { /* Include Wireless Extension definition and check version - Jean II */ #include <linux/wireless.h> -#define WIRELESS_SPY // enable iwspy support -#include <net/iw_handler.h> // New driver API +#define WIRELESS_SPY /* enable iwspy support */ +#include <net/iw_handler.h> /* New driver API */ -#define CISCO_EXT // enable Cisco extensions +#define CISCO_EXT /* enable Cisco extensions */ #ifdef CISCO_EXT #include <linux/delay.h> #endif @@ -281,7 +281,7 @@ MODULE_PARM_DESC(proc_perm, "The permission bits of the files in /proc"); /* This is a kind of sloppy hack to get this information to OUT4500 and IN4500. I would be extremely interested in the situation where this doesn't work though!!! */ -static int do8bitIO = 0; +static int do8bitIO /* = 0 */; /* Return codes */ #define SUCCESS 0 @@ -398,8 +398,8 @@ static int do8bitIO = 0; #define MAXTXQ 64 /* BAP selectors */ -#define BAP0 0 // Used for receiving packets -#define BAP1 2 // Used for xmiting packets and working with RIDS +#define BAP0 0 /* Used for receiving packets */ +#define BAP1 2 /* Used for xmiting packets and working with RIDS */ /* Flags */ #define COMMAND_BUSY 0x8000 @@ -5522,11 +5522,13 @@ static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state) Cmd cmd; Resp rsp; - if ((ai->APList == NULL) && - (ai->APList = kmalloc(sizeof(APListRid), GFP_KERNEL)) == NULL) + if (!ai->APList) + ai->APList = kmalloc(sizeof(APListRid), GFP_KERNEL); + if (!ai->APList) return -ENOMEM; - if ((ai->SSID == NULL) && - (ai->SSID = kmalloc(sizeof(SsidRid), GFP_KERNEL)) == NULL) + if (!ai->SSID) + ai->SSID = kmalloc(sizeof(SsidRid), GFP_KERNEL); + if (!ai->SSID) return -ENOMEM; readAPListRid(ai, ai->APList); readSsidRid(ai, ai->SSID); @@ -5537,7 +5539,7 @@ static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state) disable_MAC(ai, 0); netif_device_detach(dev); ai->power = state; - cmd.cmd=HOSTSLEEP; + cmd.cmd = HOSTSLEEP; issuecommand(ai, &cmd, &rsp); pci_enable_wake(pdev, pci_choose_state(pdev, state), 1); @@ -5567,7 +5569,7 @@ static int airo_pci_resume(struct pci_dev *pdev) msleep(100); } - set_bit (FLAG_COMMIT, &ai->flags); + set_bit(FLAG_COMMIT, &ai->flags); disable_MAC(ai, 0); msleep(200); if (ai->SSID) { @@ -5594,9 +5596,6 @@ static int airo_pci_resume(struct pci_dev *pdev) static int __init airo_init_module( void ) { int i; -#if 0 - int have_isa_dev = 0; -#endif airo_entry = create_proc_entry("driver/aironet", S_IFDIR | airo_perm, @@ -5607,15 +5606,11 @@ static int __init airo_init_module( void ) airo_entry->gid = proc_gid; } - for( i = 0; i < 4 && io[i] && irq[i]; i++ ) { + for (i = 0; i < 4 && io[i] && irq[i]; i++) { airo_print_info("", "Trying to configure ISA adapter at irq=%d " "io=0x%x", irq[i], io[i] ); if (init_airo_card( irq[i], io[i], 0, NULL )) -#if 0 - have_isa_dev = 1; -#else /* do nothing */ ; -#endif } #ifdef CONFIG_PCI @@ -5661,7 +5656,7 @@ static void __exit airo_cleanup_module( void ) static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi) { - if( !rssi_rid ) + if (!rssi_rid) return 0; return (0x100 - rssi_rid[rssi].rssidBm); @@ -5671,10 +5666,10 @@ static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm) { int i; - if( !rssi_rid ) + if (!rssi_rid) return 0; - for( i = 0; i < 256; i++ ) + for (i = 0; i < 256; i++) if (rssi_rid[i].rssidBm == dbm) return rssi_rid[i].rssipct; @@ -7156,6 +7151,7 @@ out: * format that the Wireless Tools will understand - Jean II */ static inline char *airo_translate_scan(struct net_device *dev, + struct iw_request_info *info, char *current_ev, char *end_buf, BSSListRid *bss) @@ -7172,7 +7168,8 @@ static inline char *airo_translate_scan(struct net_device *dev, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); /* Other entries will be displayed in the order we give them */ @@ -7182,7 +7179,8 @@ static inline char *airo_translate_scan(struct net_device *dev, iwe.u.data.length = 32; iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->ssid); /* Add mode */ iwe.cmd = SIOCGIWMODE; @@ -7192,7 +7190,8 @@ static inline char *airo_translate_scan(struct net_device *dev, iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); } /* Add frequency */ @@ -7203,7 +7202,8 @@ static inline char *airo_translate_scan(struct net_device *dev, */ iwe.u.freq.m = frequency_list[iwe.u.freq.m - 1] * 100000; iwe.u.freq.e = 1; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); dBm = le16_to_cpu(bss->dBm); @@ -7223,7 +7223,8 @@ static inline char *airo_translate_scan(struct net_device *dev, | IW_QUAL_DBM; } iwe.u.qual.noise = ai->wstats.qual.noise; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); /* Add encryption capability */ iwe.cmd = SIOCGIWENCODE; @@ -7232,11 +7233,12 @@ static inline char *airo_translate_scan(struct net_device *dev, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->ssid); /* Rate : stuffing multiple values in a single event require a bit * more of magic - Jean II */ - current_val = current_ev + IW_EV_LCP_LEN; + current_val = current_ev + iwe_stream_lcp_len(info); iwe.cmd = SIOCGIWRATE; /* Those two flags are ignored... */ @@ -7249,10 +7251,12 @@ static inline char *airo_translate_scan(struct net_device *dev, /* Bit rate given in 500 kb/s units (+ 0x80) */ iwe.u.bitrate.value = ((bss->rates[i] & 0x7f) * 500000); /* Add new value to event */ - current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN); + current_val = iwe_stream_add_value(info, current_ev, + current_val, end_buf, + &iwe, IW_EV_PARAM_LEN); } /* Check if we added any event */ - if((current_val - current_ev) > IW_EV_LCP_LEN) + if ((current_val - current_ev) > iwe_stream_lcp_len(info)) current_ev = current_val; /* Beacon interval */ @@ -7261,7 +7265,8 @@ static inline char *airo_translate_scan(struct net_device *dev, iwe.cmd = IWEVCUSTOM; sprintf(buf, "bcn_int=%d", bss->beaconInterval); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, buf); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, buf); kfree(buf); } @@ -7295,8 +7300,10 @@ static inline char *airo_translate_scan(struct net_device *dev, iwe.cmd = IWEVGENIE; iwe.u.data.length = min(info_element->len + 2, MAX_WPA_IE_LEN); - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, (char *) info_element); + current_ev = iwe_stream_add_point( + info, current_ev, + end_buf, &iwe, + (char *) info_element); } break; @@ -7304,8 +7311,9 @@ static inline char *airo_translate_scan(struct net_device *dev, iwe.cmd = IWEVGENIE; iwe.u.data.length = min(info_element->len + 2, MAX_WPA_IE_LEN); - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, (char *) info_element); + current_ev = iwe_stream_add_point( + info, current_ev, end_buf, + &iwe, (char *) info_element); break; default: @@ -7344,7 +7352,7 @@ static int airo_get_scan(struct net_device *dev, list_for_each_entry (net, &ai->network_list, list) { /* Translate to WE format this entry */ - current_ev = airo_translate_scan(dev, current_ev, + current_ev = airo_translate_scan(dev, info, current_ev, extra + dwrq->length, &net->bss); diff --git a/drivers/net/wireless/ath5k/Kconfig b/drivers/net/wireless/ath5k/Kconfig index f1f2aea2eab..75383a5df99 100644 --- a/drivers/net/wireless/ath5k/Kconfig +++ b/drivers/net/wireless/ath5k/Kconfig @@ -1,6 +1,9 @@ config ATH5K tristate "Atheros 5xxx wireless cards support" depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL + select MAC80211_LEDS + select LEDS_CLASS + select NEW_LEDS ---help--- This module adds support for wireless adapters based on Atheros 5xxx chipset. diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 85045afc1ba..a43e9b25169 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -58,11 +58,6 @@ #include "reg.h" #include "debug.h" -enum { - ATH_LED_TX, - ATH_LED_RX, -}; - static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */ @@ -309,13 +304,10 @@ static void ath5k_tasklet_reset(unsigned long data); static void ath5k_calibrate(unsigned long data); /* LED functions */ -static void ath5k_led_off(unsigned long data); -static void ath5k_led_blink(struct ath5k_softc *sc, - unsigned int on, - unsigned int off); -static void ath5k_led_event(struct ath5k_softc *sc, - int event); - +static int ath5k_init_leds(struct ath5k_softc *sc); +static void ath5k_led_enable(struct ath5k_softc *sc); +static void ath5k_led_off(struct ath5k_softc *sc); +static void ath5k_unregister_leds(struct ath5k_softc *sc); /* * Module init/exit functions @@ -596,8 +588,7 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state) struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath5k_softc *sc = hw->priv; - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) - ath5k_hw_set_gpio(sc->ah, sc->led_pin, 1); + ath5k_led_off(sc); ath5k_stop_hw(sc); pci_save_state(pdev); @@ -632,10 +623,7 @@ ath5k_pci_resume(struct pci_dev *pdev) pci_write_config_byte(pdev, 0x41, 0); ath5k_init(sc); - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { - ath5k_hw_set_gpio_output(ah, sc->led_pin); - ath5k_hw_set_gpio(ah, sc->led_pin, 0); - } + ath5k_led_enable(sc); /* * Reset the key cache since some parts do not @@ -742,27 +730,6 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc); tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc); setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc); - setup_timer(&sc->led_tim, ath5k_led_off, (unsigned long)sc); - - sc->led_on = 0; /* low true */ - /* - * Auto-enable soft led processing for IBM cards and for - * 5211 minipci cards. - */ - if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM || - pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) { - __set_bit(ATH_STAT_LEDSOFT, sc->status); - sc->led_pin = 0; - } - /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ - if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { - __set_bit(ATH_STAT_LEDSOFT, sc->status); - sc->led_pin = 0; - } - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { - ath5k_hw_set_gpio_output(ah, sc->led_pin); - ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on); - } ath5k_hw_get_lladdr(ah, mac); SET_IEEE80211_PERM_ADDR(hw, mac); @@ -776,6 +743,8 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) goto err_queues; } + ath5k_init_leds(sc); + return 0; err_queues: ath5k_txq_release(sc); @@ -809,6 +778,7 @@ ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw) ath5k_desc_free(sc, pdev); ath5k_txq_release(sc); ath5k_hw_release_tx_queue(sc->ah, sc->bhalq); + ath5k_unregister_leds(sc); /* * NB: can't reclaim these until after ieee80211_ifdetach @@ -1060,65 +1030,9 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) return 0; } -/* - * TODO: CLEAN THIS !!! - */ static void ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) { - if (unlikely(test_bit(ATH_STAT_LEDSOFT, sc->status))) { - /* from Atheros NDIS driver, w/ permission */ - static const struct { - u16 rate; /* tx/rx 802.11 rate */ - u16 timeOn; /* LED on time (ms) */ - u16 timeOff; /* LED off time (ms) */ - } blinkrates[] = { - { 108, 40, 10 }, - { 96, 44, 11 }, - { 72, 50, 13 }, - { 48, 57, 14 }, - { 36, 67, 16 }, - { 24, 80, 20 }, - { 22, 100, 25 }, - { 18, 133, 34 }, - { 12, 160, 40 }, - { 10, 200, 50 }, - { 6, 240, 58 }, - { 4, 267, 66 }, - { 2, 400, 100 }, - { 0, 500, 130 } - }; - const struct ath5k_rate_table *rt = - ath5k_hw_get_rate_table(sc->ah, mode); - unsigned int i, j; - - BUG_ON(rt == NULL); - - memset(sc->hwmap, 0, sizeof(sc->hwmap)); - for (i = 0; i < 32; i++) { - u8 ix = rt->rate_code_to_index[i]; - if (ix == 0xff) { - sc->hwmap[i].ledon = msecs_to_jiffies(500); - sc->hwmap[i].ledoff = msecs_to_jiffies(130); - continue; - } - sc->hwmap[i].txflags = IEEE80211_RADIOTAP_F_DATAPAD; - /* receive frames include FCS */ - sc->hwmap[i].rxflags = sc->hwmap[i].txflags | - IEEE80211_RADIOTAP_F_FCS; - /* setup blink rate table to avoid per-packet lookup */ - for (j = 0; j < ARRAY_SIZE(blinkrates) - 1; j++) - if (blinkrates[j].rate == /* XXX why 7f? */ - (rt->rates[ix].dot11_rate&0x7f)) - break; - - sc->hwmap[i].ledon = msecs_to_jiffies(blinkrates[j]. - timeOn); - sc->hwmap[i].ledoff = msecs_to_jiffies(blinkrates[j]. - timeOff); - } - } - sc->curmode = mode; if (mode == AR5K_MODE_11A) { @@ -1691,9 +1605,9 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds, /* Apparently when a default key is used to decrypt the packet the hw does not set the index used to decrypt. In such cases get the index from the packet. */ - if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) && - !(rs->rs_status & AR5K_RXERR_DECRYPT) && - skb->len >= hlen + 4) { + if (ieee80211_has_protected(hdr->frame_control) && + !(rs->rs_status & AR5K_RXERR_DECRYPT) && + skb->len >= hlen + 4) { keyix = skb->data[hlen + 3] >> 6; if (test_bit(keyix, sc->keymap)) @@ -1712,10 +1626,7 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb, u32 hw_tu; struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data; - if ((le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_FTYPE) == - IEEE80211_FTYPE_MGMT && - (le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE) == - IEEE80211_STYPE_BEACON && + if (ieee80211_is_beacon(mgmt->frame_control) && le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS && memcmp(mgmt->bssid, sc->ah->ah_bssid, ETH_ALEN) == 0) { /* @@ -1903,8 +1814,6 @@ accept: ath5k_check_ibss_tsf(sc, skb, &rxs); __ieee80211_rx(sc->hw, skb, &rxs); - sc->led_rxrate = rs.rs_rate; - ath5k_led_event(sc, ATH_LED_RX); next: list_move_tail(&bf->list, &sc->rxbuf); } while (ath5k_rxbuf_setup(sc, bf) == 0); @@ -1985,13 +1894,9 @@ ath5k_tasklet_tx(unsigned long data) struct ath5k_softc *sc = (void *)data; ath5k_tx_processq(sc, sc->txq); - - ath5k_led_event(sc, ATH_LED_TX); } - - /*****************\ * Beacon handling * \*****************/ @@ -2366,11 +2271,7 @@ ath5k_stop_locked(struct ath5k_softc *sc) ieee80211_stop_queues(sc->hw); if (!test_bit(ATH_STAT_INVALID, sc->status)) { - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { - del_timer_sync(&sc->led_tim); - ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on); - __clear_bit(ATH_STAT_LEDBLINKING, sc->status); - } + ath5k_led_off(sc); ath5k_hw_set_intr(ah, 0); } ath5k_txq_cleanup(sc); @@ -2566,55 +2467,124 @@ ath5k_calibrate(unsigned long data) \***************/ static void -ath5k_led_off(unsigned long data) +ath5k_led_enable(struct ath5k_softc *sc) { - struct ath5k_softc *sc = (void *)data; - - if (test_bit(ATH_STAT_LEDENDBLINK, sc->status)) - __clear_bit(ATH_STAT_LEDBLINKING, sc->status); - else { - __set_bit(ATH_STAT_LEDENDBLINK, sc->status); - ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on); - mod_timer(&sc->led_tim, jiffies + sc->led_off); + if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { + ath5k_hw_set_gpio_output(sc->ah, sc->led_pin); + ath5k_led_off(sc); } } -/* - * Blink the LED according to the specified on/off times. - */ static void -ath5k_led_blink(struct ath5k_softc *sc, unsigned int on, - unsigned int off) +ath5k_led_on(struct ath5k_softc *sc) { - ATH5K_DBG(sc, ATH5K_DEBUG_LED, "on %u off %u\n", on, off); + if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) + return; ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on); - __set_bit(ATH_STAT_LEDBLINKING, sc->status); - __clear_bit(ATH_STAT_LEDENDBLINK, sc->status); - sc->led_off = off; - mod_timer(&sc->led_tim, jiffies + on); } static void -ath5k_led_event(struct ath5k_softc *sc, int event) +ath5k_led_off(struct ath5k_softc *sc) { - if (likely(!test_bit(ATH_STAT_LEDSOFT, sc->status))) + if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) return; - if (unlikely(test_bit(ATH_STAT_LEDBLINKING, sc->status))) - return; /* don't interrupt active blink */ - switch (event) { - case ATH_LED_TX: - ath5k_led_blink(sc, sc->hwmap[sc->led_txrate].ledon, - sc->hwmap[sc->led_txrate].ledoff); - break; - case ATH_LED_RX: - ath5k_led_blink(sc, sc->hwmap[sc->led_rxrate].ledon, - sc->hwmap[sc->led_rxrate].ledoff); - break; + ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on); +} + +static void +ath5k_led_brightness_set(struct led_classdev *led_dev, + enum led_brightness brightness) +{ + struct ath5k_led *led = container_of(led_dev, struct ath5k_led, + led_dev); + + if (brightness == LED_OFF) + ath5k_led_off(led->sc); + else + ath5k_led_on(led->sc); +} + +static int +ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led, + const char *name, char *trigger) +{ + int err; + + led->sc = sc; + strncpy(led->name, name, sizeof(led->name)); + led->led_dev.name = led->name; + led->led_dev.default_trigger = trigger; + led->led_dev.brightness_set = ath5k_led_brightness_set; + + err = led_classdev_register(&sc->pdev->dev, &led->led_dev); + if (err) + { + ATH5K_WARN(sc, "could not register LED %s\n", name); + led->sc = NULL; } + return err; +} + +static void +ath5k_unregister_led(struct ath5k_led *led) +{ + if (!led->sc) + return; + led_classdev_unregister(&led->led_dev); + ath5k_led_off(led->sc); + led->sc = NULL; } +static void +ath5k_unregister_leds(struct ath5k_softc *sc) +{ + ath5k_unregister_led(&sc->rx_led); + ath5k_unregister_led(&sc->tx_led); +} +static int +ath5k_init_leds(struct ath5k_softc *sc) +{ + int ret = 0; + struct ieee80211_hw *hw = sc->hw; + struct pci_dev *pdev = sc->pdev; + char name[ATH5K_LED_MAX_NAME_LEN + 1]; + + sc->led_on = 0; /* active low */ + + /* + * Auto-enable soft led processing for IBM cards and for + * 5211 minipci cards. + */ + if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM || + pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) { + __set_bit(ATH_STAT_LEDSOFT, sc->status); + sc->led_pin = 0; + } + /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ + if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { + __set_bit(ATH_STAT_LEDSOFT, sc->status); + sc->led_pin = 1; + } + if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) + goto out; + + ath5k_led_enable(sc); + + snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy)); + ret = ath5k_register_led(sc, &sc->rx_led, name, + ieee80211_get_rx_led_name(hw)); + if (ret) + goto out; + + snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy)); + ret = ath5k_register_led(sc, &sc->tx_led, name, + ieee80211_get_tx_led_name(hw)); +out: + return ret; +} + /********************\ * Mac80211 functions * @@ -2625,7 +2595,6 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) { struct ath5k_softc *sc = hw->priv; struct ath5k_buf *bf; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); unsigned long flags; int hdrlen; int pad; @@ -2651,8 +2620,6 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) memmove(skb->data, skb->data+pad, hdrlen); } - sc->led_txrate = ieee80211_get_tx_rate(hw, info)->hw_value; - spin_lock_irqsave(&sc->txbuflock, flags); if (list_empty(&sc->txbuf)) { ATH5K_ERR(sc, "no further txbuf available, dropping packet\n"); diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index bb4b26d523a..47f414b09e6 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -45,6 +45,7 @@ #include <linux/list.h> #include <linux/wireless.h> #include <linux/if_ether.h> +#include <linux/leds.h> #include "ath5k.h" #include "debug.h" @@ -79,6 +80,19 @@ struct ath5k_txq { bool setup; }; +#define ATH5K_LED_MAX_NAME_LEN 31 + +/* + * State for LED triggers + */ +struct ath5k_led +{ + char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ + struct ath5k_softc *sc; /* driver state */ + struct led_classdev led_dev; /* led classdev */ +}; + + #if CHAN_DEBUG #define ATH_CHAN_MAX (26+26+26+200+200) #else @@ -118,13 +132,11 @@ struct ath5k_softc { size_t desc_len; /* size of TX/RX descriptors */ u16 cachelsz; /* cache line size */ - DECLARE_BITMAP(status, 6); + DECLARE_BITMAP(status, 4); #define ATH_STAT_INVALID 0 /* disable hardware accesses */ #define ATH_STAT_MRRETRY 1 /* multi-rate retry support */ #define ATH_STAT_PROMISC 2 -#define ATH_STAT_LEDBLINKING 3 /* LED blink operation active */ -#define ATH_STAT_LEDENDBLINK 4 /* finish LED blink operation */ -#define ATH_STAT_LEDSOFT 5 /* enable LED gpio status */ +#define ATH_STAT_LEDSOFT 3 /* enable LED gpio status */ unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ unsigned int curmode; /* current phy mode */ @@ -132,13 +144,6 @@ struct ath5k_softc { struct ieee80211_vif *vif; - struct { - u8 rxflags; /* radiotap rx flags */ - u8 txflags; /* radiotap tx flags */ - u16 ledon; /* softled on time */ - u16 ledoff; /* softled off time */ - } hwmap[32]; /* h/w rate ix mappings */ - enum ath5k_int imask; /* interrupt mask copy */ DECLARE_BITMAP(keymap, AR5K_KEYCACHE_SIZE); /* key use bit map */ @@ -148,9 +153,6 @@ struct ath5k_softc { unsigned int led_pin, /* GPIO pin for driving LED */ led_on, /* pin setting for LED on */ led_off; /* off time for current blink */ - struct timer_list led_tim; /* led off timer */ - u8 led_rxrate; /* current rx rate for LED */ - u8 led_txrate; /* current tx rate for LED */ struct tasklet_struct restq; /* reset tasklet */ @@ -159,6 +161,7 @@ struct ath5k_softc { spinlock_t rxbuflock; u32 *rxlink; /* link ptr in last RX desc */ struct tasklet_struct rxtq; /* rx intr tasklet */ + struct ath5k_led rx_led; /* rx led */ struct list_head txbuf; /* transmit buffer */ spinlock_t txbuflock; @@ -167,6 +170,7 @@ struct ath5k_softc { struct ath5k_txq *txq; /* beacon and tx*/ struct tasklet_struct txtq; /* tx intr tasklet */ + struct ath5k_led tx_led; /* tx led */ struct ath5k_buf *bbuf; /* beacon buffer */ unsigned int bhalq, /* SW q for outgoing beacons */ diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index 77990b56860..c6d12c53bda 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -31,14 +31,14 @@ #include "base.h" #include "debug.h" -/*Rate tables*/ +/* Rate tables */ static const struct ath5k_rate_table ath5k_rt_11a = AR5K_RATES_11A; static const struct ath5k_rate_table ath5k_rt_11b = AR5K_RATES_11B; static const struct ath5k_rate_table ath5k_rt_11g = AR5K_RATES_11G; static const struct ath5k_rate_table ath5k_rt_turbo = AR5K_RATES_TURBO; static const struct ath5k_rate_table ath5k_rt_xr = AR5K_RATES_XR; -/*Prototypes*/ +/* Prototypes */ static int ath5k_hw_nic_reset(struct ath5k_hw *, u32); static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool); static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *, struct ath5k_desc *, diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 7bb2646ae0e..28b6ff3eaa3 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -2310,30 +2310,40 @@ static int atmel_get_scan(struct net_device *dev, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, priv->BSSinfo[i].BSSID, 6); - current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_ADDR_LEN); + current_ev = iwe_stream_add_event(info, current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, IW_EV_ADDR_LEN); iwe.u.data.length = priv->BSSinfo[i].SSIDsize; if (iwe.u.data.length > 32) iwe.u.data.length = 32; iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, priv->BSSinfo[i].SSID); + current_ev = iwe_stream_add_point(info, current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, priv->BSSinfo[i].SSID); iwe.cmd = SIOCGIWMODE; iwe.u.mode = priv->BSSinfo[i].BSStype; - current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, IW_EV_UINT_LEN); iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = priv->BSSinfo[i].channel; iwe.u.freq.e = 0; - current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN); + current_ev = iwe_stream_add_event(info, current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, IW_EV_FREQ_LEN); /* Add quality statistics */ iwe.cmd = IWEVQUAL; iwe.u.qual.level = priv->BSSinfo[i].RSSI; iwe.u.qual.qual = iwe.u.qual.level; /* iwe.u.qual.noise = SOMETHING */ - current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA , &iwe, IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, IW_EV_QUAL_LEN); iwe.cmd = SIOCGIWENCODE; @@ -2342,7 +2352,9 @@ static int atmel_get_scan(struct net_device *dev, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, NULL); + current_ev = iwe_stream_add_point(info, current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, NULL); } /* Length of data */ diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 532365f5ece..edcdfa36645 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -441,6 +441,8 @@ enum { #define B43_FWPANIC_DIE 0 /* Firmware died. Don't auto-restart it. */ #define B43_FWPANIC_RESTART 1 /* Firmware died. Schedule a controller reset. */ +/* The firmware register that contains the watchdog counter. */ +#define B43_WATCHDOG_REG 1 /* Device specific rate values. * The actual values defined here are (rate_in_mbps * 2). diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index 210e2789c1c..29851bc1101 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -74,70 +74,327 @@ struct b43_dfs_file * fops_to_dfs_file(struct b43_wldev *dev, } while (0) -/* wl->irq_lock is locked */ -static ssize_t tsf_read_file(struct b43_wldev *dev, - char *buf, size_t bufsize) +/* The biggest address values for SHM access from the debugfs files. */ +#define B43_MAX_SHM_ROUTING 4 +#define B43_MAX_SHM_ADDR 0xFFFF + +static ssize_t shm16read__read_file(struct b43_wldev *dev, + char *buf, size_t bufsize) { ssize_t count = 0; - u64 tsf; + unsigned int routing, addr; + u16 val; - b43_tsf_read(dev, &tsf); - fappend("0x%08x%08x\n", - (unsigned int)((tsf & 0xFFFFFFFF00000000ULL) >> 32), - (unsigned int)(tsf & 0xFFFFFFFFULL)); + routing = dev->dfsentry->shm16read_routing_next; + addr = dev->dfsentry->shm16read_addr_next; + if ((routing > B43_MAX_SHM_ROUTING) || + (addr > B43_MAX_SHM_ADDR)) + return -EDESTADDRREQ; + + val = b43_shm_read16(dev, routing, addr); + fappend("0x%04X\n", val); return count; } -/* wl->irq_lock is locked */ -static int tsf_write_file(struct b43_wldev *dev, - const char *buf, size_t count) +static int shm16read__write_file(struct b43_wldev *dev, + const char *buf, size_t count) { - u64 tsf; + unsigned int routing, addr; + int res; - if (sscanf(buf, "%llu", (unsigned long long *)(&tsf)) != 1) + res = sscanf(buf, "0x%X 0x%X", &routing, &addr); + if (res != 2) return -EINVAL; - b43_tsf_write(dev, tsf); + if (routing > B43_MAX_SHM_ROUTING) + return -EADDRNOTAVAIL; + if (addr > B43_MAX_SHM_ADDR) + return -EADDRNOTAVAIL; + if (routing == B43_SHM_SHARED) { + if ((addr % 2) != 0) + return -EADDRNOTAVAIL; + } + + dev->dfsentry->shm16read_routing_next = routing; + dev->dfsentry->shm16read_addr_next = addr; return 0; } -/* wl->irq_lock is locked */ -static ssize_t ucode_regs_read_file(struct b43_wldev *dev, +static int shm16write__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int routing, addr, mask, set; + u16 val; + int res; + unsigned long flags; + + res = sscanf(buf, "0x%X 0x%X 0x%X 0x%X", + &routing, &addr, &mask, &set); + if (res != 4) + return -EINVAL; + if (routing > B43_MAX_SHM_ROUTING) + return -EADDRNOTAVAIL; + if (addr > B43_MAX_SHM_ADDR) + return -EADDRNOTAVAIL; + if (routing == B43_SHM_SHARED) { + if ((addr % 2) != 0) + return -EADDRNOTAVAIL; + } + if ((mask > 0xFFFF) || (set > 0xFFFF)) + return -E2BIG; + + spin_lock_irqsave(&dev->wl->shm_lock, flags); + if (mask == 0) + val = 0; + else + val = __b43_shm_read16(dev, routing, addr); + val &= mask; + val |= set; + __b43_shm_write16(dev, routing, addr, val); + spin_unlock_irqrestore(&dev->wl->shm_lock, flags); + + return 0; +} + +static ssize_t shm32read__read_file(struct b43_wldev *dev, char *buf, size_t bufsize) { ssize_t count = 0; - int i; + unsigned int routing, addr; + u32 val; + + routing = dev->dfsentry->shm32read_routing_next; + addr = dev->dfsentry->shm32read_addr_next; + if ((routing > B43_MAX_SHM_ROUTING) || + (addr > B43_MAX_SHM_ADDR)) + return -EDESTADDRREQ; - for (i = 0; i < 64; i++) { - fappend("r%d = 0x%04x\n", i, - b43_shm_read16(dev, B43_SHM_SCRATCH, i)); + val = b43_shm_read32(dev, routing, addr); + fappend("0x%08X\n", val); + + return count; +} + +static int shm32read__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int routing, addr; + int res; + + res = sscanf(buf, "0x%X 0x%X", &routing, &addr); + if (res != 2) + return -EINVAL; + if (routing > B43_MAX_SHM_ROUTING) + return -EADDRNOTAVAIL; + if (addr > B43_MAX_SHM_ADDR) + return -EADDRNOTAVAIL; + if (routing == B43_SHM_SHARED) { + if ((addr % 2) != 0) + return -EADDRNOTAVAIL; + } + + dev->dfsentry->shm32read_routing_next = routing; + dev->dfsentry->shm32read_addr_next = addr; + + return 0; +} + +static int shm32write__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int routing, addr, mask, set; + u32 val; + int res; + unsigned long flags; + + res = sscanf(buf, "0x%X 0x%X 0x%X 0x%X", + &routing, &addr, &mask, &set); + if (res != 4) + return -EINVAL; + if (routing > B43_MAX_SHM_ROUTING) + return -EADDRNOTAVAIL; + if (addr > B43_MAX_SHM_ADDR) + return -EADDRNOTAVAIL; + if (routing == B43_SHM_SHARED) { + if ((addr % 2) != 0) + return -EADDRNOTAVAIL; } + if ((mask > 0xFFFFFFFF) || (set > 0xFFFFFFFF)) + return -E2BIG; + + spin_lock_irqsave(&dev->wl->shm_lock, flags); + if (mask == 0) + val = 0; + else + val = __b43_shm_read32(dev, routing, addr); + val &= mask; + val |= set; + __b43_shm_write32(dev, routing, addr, val); + spin_unlock_irqrestore(&dev->wl->shm_lock, flags); + + return 0; +} + +/* The biggest MMIO address that we allow access to from the debugfs files. */ +#define B43_MAX_MMIO_ACCESS (0xF00 - 1) + +static ssize_t mmio16read__read_file(struct b43_wldev *dev, + char *buf, size_t bufsize) +{ + ssize_t count = 0; + unsigned int addr; + u16 val; + + addr = dev->dfsentry->mmio16read_next; + if (addr > B43_MAX_MMIO_ACCESS) + return -EDESTADDRREQ; + + val = b43_read16(dev, addr); + fappend("0x%04X\n", val); + + return count; +} + +static int mmio16read__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int addr; + int res; + + res = sscanf(buf, "0x%X", &addr); + if (res != 1) + return -EINVAL; + if (addr > B43_MAX_MMIO_ACCESS) + return -EADDRNOTAVAIL; + if ((addr % 2) != 0) + return -EINVAL; + + dev->dfsentry->mmio16read_next = addr; + + return 0; +} + +static int mmio16write__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int addr, mask, set; + int res; + u16 val; + + res = sscanf(buf, "0x%X 0x%X 0x%X", &addr, &mask, &set); + if (res != 3) + return -EINVAL; + if (addr > B43_MAX_MMIO_ACCESS) + return -EADDRNOTAVAIL; + if ((mask > 0xFFFF) || (set > 0xFFFF)) + return -E2BIG; + if ((addr % 2) != 0) + return -EINVAL; + + if (mask == 0) + val = 0; + else + val = b43_read16(dev, addr); + val &= mask; + val |= set; + b43_write16(dev, addr, val); + + return 0; +} + +static ssize_t mmio32read__read_file(struct b43_wldev *dev, + char *buf, size_t bufsize) +{ + ssize_t count = 0; + unsigned int addr; + u32 val; + + addr = dev->dfsentry->mmio32read_next; + if (addr > B43_MAX_MMIO_ACCESS) + return -EDESTADDRREQ; + + val = b43_read32(dev, addr); + fappend("0x%08X\n", val); return count; } +static int mmio32read__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int addr; + int res; + + res = sscanf(buf, "0x%X", &addr); + if (res != 1) + return -EINVAL; + if (addr > B43_MAX_MMIO_ACCESS) + return -EADDRNOTAVAIL; + if ((addr % 4) != 0) + return -EINVAL; + + dev->dfsentry->mmio32read_next = addr; + + return 0; +} + +static int mmio32write__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int addr, mask, set; + int res; + u32 val; + + res = sscanf(buf, "0x%X 0x%X 0x%X", &addr, &mask, &set); + if (res != 3) + return -EINVAL; + if (addr > B43_MAX_MMIO_ACCESS) + return -EADDRNOTAVAIL; + if ((mask > 0xFFFFFFFF) || (set > 0xFFFFFFFF)) + return -E2BIG; + if ((addr % 4) != 0) + return -EINVAL; + + if (mask == 0) + val = 0; + else + val = b43_read32(dev, addr); + val &= mask; + val |= set; + b43_write32(dev, addr, val); + + return 0; +} + /* wl->irq_lock is locked */ -static ssize_t shm_read_file(struct b43_wldev *dev, +static ssize_t tsf_read_file(struct b43_wldev *dev, char *buf, size_t bufsize) { ssize_t count = 0; - int i; - u16 tmp; - __le16 *le16buf = (__le16 *)buf; + u64 tsf; - for (i = 0; i < 0x1000; i++) { - if (bufsize < sizeof(tmp)) - break; - tmp = b43_shm_read16(dev, B43_SHM_SHARED, 2 * i); - le16buf[i] = cpu_to_le16(tmp); - count += sizeof(tmp); - bufsize -= sizeof(tmp); - } + b43_tsf_read(dev, &tsf); + fappend("0x%08x%08x\n", + (unsigned int)((tsf & 0xFFFFFFFF00000000ULL) >> 32), + (unsigned int)(tsf & 0xFFFFFFFFULL)); return count; } +/* wl->irq_lock is locked */ +static int tsf_write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + u64 tsf; + + if (sscanf(buf, "%llu", (unsigned long long *)(&tsf)) != 1) + return -EINVAL; + b43_tsf_write(dev, tsf); + + return 0; +} + static ssize_t txstat_read_file(struct b43_wldev *dev, char *buf, size_t bufsize) { @@ -496,9 +753,15 @@ out_unlock: .take_irqlock = _take_irqlock, \ } +B43_DEBUGFS_FOPS(shm16read, shm16read__read_file, shm16read__write_file, 1); +B43_DEBUGFS_FOPS(shm16write, NULL, shm16write__write_file, 1); +B43_DEBUGFS_FOPS(shm32read, shm32read__read_file, shm32read__write_file, 1); +B43_DEBUGFS_FOPS(shm32write, NULL, shm32write__write_file, 1); +B43_DEBUGFS_FOPS(mmio16read, mmio16read__read_file, mmio16read__write_file, 1); +B43_DEBUGFS_FOPS(mmio16write, NULL, mmio16write__write_file, 1); +B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file, 1); +B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file, 1); B43_DEBUGFS_FOPS(tsf, tsf_read_file, tsf_write_file, 1); -B43_DEBUGFS_FOPS(ucode_regs, ucode_regs_read_file, NULL, 1); -B43_DEBUGFS_FOPS(shm, shm_read_file, NULL, 1); B43_DEBUGFS_FOPS(txstat, txstat_read_file, NULL, 0); B43_DEBUGFS_FOPS(txpower_g, txpower_g_read_file, txpower_g_write_file, 0); B43_DEBUGFS_FOPS(restart, NULL, restart_write_file, 1); @@ -538,6 +801,7 @@ static void b43_add_dynamic_debug(struct b43_wldev *dev) add_dyn_dbg("debug_pwork_fast", B43_DBG_PWORK_FAST, 0); add_dyn_dbg("debug_pwork_stop", B43_DBG_PWORK_STOP, 0); add_dyn_dbg("debug_lo", B43_DBG_LO, 0); + add_dyn_dbg("debug_firmware", B43_DBG_FIRMWARE, 0); #undef add_dyn_dbg } @@ -584,6 +848,13 @@ void b43_debugfs_add_device(struct b43_wldev *dev) return; } + e->mmio16read_next = 0xFFFF; /* invalid address */ + e->mmio32read_next = 0xFFFF; /* invalid address */ + e->shm16read_routing_next = 0xFFFFFFFF; /* invalid routing */ + e->shm16read_addr_next = 0xFFFFFFFF; /* invalid address */ + e->shm32read_routing_next = 0xFFFFFFFF; /* invalid routing */ + e->shm32read_addr_next = 0xFFFFFFFF; /* invalid address */ + #define ADD_FILE(name, mode) \ do { \ struct dentry *d; \ @@ -596,9 +867,15 @@ void b43_debugfs_add_device(struct b43_wldev *dev) } while (0) + ADD_FILE(shm16read, 0600); + ADD_FILE(shm16write, 0200); + ADD_FILE(shm32read, 0600); + ADD_FILE(shm32write, 0200); + ADD_FILE(mmio16read, 0600); + ADD_FILE(mmio16write, 0200); + ADD_FILE(mmio32read, 0600); + ADD_FILE(mmio32write, 0200); ADD_FILE(tsf, 0600); - ADD_FILE(ucode_regs, 0400); - ADD_FILE(shm, 0400); ADD_FILE(txstat, 0400); ADD_FILE(txpower_g, 0600); ADD_FILE(restart, 0200); @@ -620,9 +897,15 @@ void b43_debugfs_remove_device(struct b43_wldev *dev) return; b43_remove_dynamic_debug(dev); + debugfs_remove(e->file_shm16read.dentry); + debugfs_remove(e->file_shm16write.dentry); + debugfs_remove(e->file_shm32read.dentry); + debugfs_remove(e->file_shm32write.dentry); + debugfs_remove(e->file_mmio16read.dentry); + debugfs_remove(e->file_mmio16write.dentry); + debugfs_remove(e->file_mmio32read.dentry); + debugfs_remove(e->file_mmio32write.dentry); debugfs_remove(e->file_tsf.dentry); - debugfs_remove(e->file_ucode_regs.dentry); - debugfs_remove(e->file_shm.dentry); debugfs_remove(e->file_txstat.dentry); debugfs_remove(e->file_txpower_g.dentry); debugfs_remove(e->file_restart.dentry); diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h index c75cff4151d..22ffd02ba55 100644 --- a/drivers/net/wireless/b43/debugfs.h +++ b/drivers/net/wireless/b43/debugfs.h @@ -11,6 +11,7 @@ enum b43_dyndbg { /* Dynamic debugging features */ B43_DBG_PWORK_FAST, B43_DBG_PWORK_STOP, B43_DBG_LO, + B43_DBG_FIRMWARE, __B43_NR_DYNDBG, }; @@ -36,9 +37,15 @@ struct b43_dfsentry { struct b43_wldev *dev; struct dentry *subdir; + struct b43_dfs_file file_shm16read; + struct b43_dfs_file file_shm16write; + struct b43_dfs_file file_shm32read; + struct b43_dfs_file file_shm32write; + struct b43_dfs_file file_mmio16read; + struct b43_dfs_file file_mmio16write; + struct b43_dfs_file file_mmio32read; + struct b43_dfs_file file_mmio32write; struct b43_dfs_file file_tsf; - struct b43_dfs_file file_ucode_regs; - struct b43_dfs_file file_shm; struct b43_dfs_file file_txstat; struct b43_dfs_file file_txpower_g; struct b43_dfs_file file_restart; @@ -46,6 +53,18 @@ struct b43_dfsentry { struct b43_txstatus_log txstatlog; + /* The cached address for the next mmio16read file read */ + u16 mmio16read_next; + /* The cached address for the next mmio32read file read */ + u16 mmio32read_next; + + /* The cached address for the next shm16read file read */ + u32 shm16read_routing_next; + u32 shm16read_addr_next; + /* The cached address for the next shm32read file read */ + u32 shm32read_routing_next; + u32 shm32read_addr_next; + /* Enabled/Disabled list for the dynamic debugging features. */ u32 dyn_debug[__B43_NR_DYNDBG]; /* Dentries for the dynamic debugging entries. */ diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 8a09a1db08d..098f886976f 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -328,11 +328,11 @@ static inline dma_addr_t dmaaddr; if (tx) { - dmaaddr = dma_map_single(ring->dev->dev->dma_dev, - buf, len, DMA_TO_DEVICE); + dmaaddr = ssb_dma_map_single(ring->dev->dev, + buf, len, DMA_TO_DEVICE); } else { - dmaaddr = dma_map_single(ring->dev->dev->dma_dev, - buf, len, DMA_FROM_DEVICE); + dmaaddr = ssb_dma_map_single(ring->dev->dev, + buf, len, DMA_FROM_DEVICE); } return dmaaddr; @@ -343,11 +343,11 @@ static inline dma_addr_t addr, size_t len, int tx) { if (tx) { - dma_unmap_single(ring->dev->dev->dma_dev, - addr, len, DMA_TO_DEVICE); + ssb_dma_unmap_single(ring->dev->dev, + addr, len, DMA_TO_DEVICE); } else { - dma_unmap_single(ring->dev->dev->dma_dev, - addr, len, DMA_FROM_DEVICE); + ssb_dma_unmap_single(ring->dev->dev, + addr, len, DMA_FROM_DEVICE); } } @@ -356,8 +356,8 @@ static inline dma_addr_t addr, size_t len) { B43_WARN_ON(ring->tx); - dma_sync_single_for_cpu(ring->dev->dev->dma_dev, - addr, len, DMA_FROM_DEVICE); + ssb_dma_sync_single_for_cpu(ring->dev->dev, + addr, len, DMA_FROM_DEVICE); } static inline @@ -365,8 +365,8 @@ static inline dma_addr_t addr, size_t len) { B43_WARN_ON(ring->tx); - dma_sync_single_for_device(ring->dev->dev->dma_dev, - addr, len, DMA_FROM_DEVICE); + ssb_dma_sync_single_for_device(ring->dev->dev, + addr, len, DMA_FROM_DEVICE); } static inline @@ -381,7 +381,6 @@ static inline static int alloc_ringmemory(struct b43_dmaring *ring) { - struct device *dma_dev = ring->dev->dev->dma_dev; gfp_t flags = GFP_KERNEL; /* The specs call for 4K buffers for 30- and 32-bit DMA with 4K @@ -392,11 +391,14 @@ static int alloc_ringmemory(struct b43_dmaring *ring) * For unknown reasons - possibly a hardware error - the BCM4311 rev * 02, which uses 64-bit DMA, needs the ring buffer in very low memory, * which accounts for the GFP_DMA flag below. + * + * The flags here must match the flags in free_ringmemory below! */ if (ring->type == B43_DMA_64BIT) flags |= GFP_DMA; - ring->descbase = dma_alloc_coherent(dma_dev, B43_DMA_RINGMEMSIZE, - &(ring->dmabase), flags); + ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev, + B43_DMA_RINGMEMSIZE, + &(ring->dmabase), flags); if (!ring->descbase) { b43err(ring->dev->wl, "DMA ringmemory allocation failed\n"); return -ENOMEM; @@ -408,10 +410,13 @@ static int alloc_ringmemory(struct b43_dmaring *ring) static void free_ringmemory(struct b43_dmaring *ring) { - struct device *dma_dev = ring->dev->dev->dma_dev; + gfp_t flags = GFP_KERNEL; + + if (ring->type == B43_DMA_64BIT) + flags |= GFP_DMA; - dma_free_coherent(dma_dev, B43_DMA_RINGMEMSIZE, - ring->descbase, ring->dmabase); + ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE, + ring->descbase, ring->dmabase, flags); } /* Reset the RX DMA channel */ @@ -518,7 +523,7 @@ static bool b43_dma_mapping_error(struct b43_dmaring *ring, dma_addr_t addr, size_t buffersize, bool dma_to_device) { - if (unlikely(dma_mapping_error(addr))) + if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr))) return 1; switch (ring->type) { @@ -844,10 +849,10 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, goto err_kfree_meta; /* test for ability to dma to txhdr_cache */ - dma_test = dma_map_single(dev->dev->dma_dev, - ring->txhdr_cache, - b43_txhdr_size(dev), - DMA_TO_DEVICE); + dma_test = ssb_dma_map_single(dev->dev, + ring->txhdr_cache, + b43_txhdr_size(dev), + DMA_TO_DEVICE); if (b43_dma_mapping_error(ring, dma_test, b43_txhdr_size(dev), 1)) { @@ -859,10 +864,10 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, if (!ring->txhdr_cache) goto err_kfree_meta; - dma_test = dma_map_single(dev->dev->dma_dev, - ring->txhdr_cache, - b43_txhdr_size(dev), - DMA_TO_DEVICE); + dma_test = ssb_dma_map_single(dev->dev, + ring->txhdr_cache, + b43_txhdr_size(dev), + DMA_TO_DEVICE); if (b43_dma_mapping_error(ring, dma_test, b43_txhdr_size(dev), 1)) { @@ -873,9 +878,9 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, } } - dma_unmap_single(dev->dev->dma_dev, - dma_test, b43_txhdr_size(dev), - DMA_TO_DEVICE); + ssb_dma_unmap_single(dev->dev, + dma_test, b43_txhdr_size(dev), + DMA_TO_DEVICE); } err = alloc_ringmemory(ring); diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 704dd3551ff..9d2eb273b72 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -373,13 +373,10 @@ static inline void b43_shm_control_word(struct b43_wldev *dev, b43_write32(dev, B43_MMIO_SHM_CONTROL, control); } -u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) +u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) { - struct b43_wl *wl = dev->wl; - unsigned long flags; u32 ret; - spin_lock_irqsave(&wl->shm_lock, flags); if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); if (offset & 0x0003) { @@ -397,18 +394,26 @@ u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) b43_shm_control_word(dev, routing, offset); ret = b43_read32(dev, B43_MMIO_SHM_DATA); out: - spin_unlock_irqrestore(&wl->shm_lock, flags); - return ret; } -u16 b43_shm_read16(struct b43_wldev * dev, u16 routing, u16 offset) +u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) { struct b43_wl *wl = dev->wl; unsigned long flags; - u16 ret; + u32 ret; spin_lock_irqsave(&wl->shm_lock, flags); + ret = __b43_shm_read32(dev, routing, offset); + spin_unlock_irqrestore(&wl->shm_lock, flags); + + return ret; +} + +u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) +{ + u16 ret; + if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); if (offset & 0x0003) { @@ -423,17 +428,24 @@ u16 b43_shm_read16(struct b43_wldev * dev, u16 routing, u16 offset) b43_shm_control_word(dev, routing, offset); ret = b43_read16(dev, B43_MMIO_SHM_DATA); out: - spin_unlock_irqrestore(&wl->shm_lock, flags); - return ret; } -void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) +u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) { struct b43_wl *wl = dev->wl; unsigned long flags; + u16 ret; spin_lock_irqsave(&wl->shm_lock, flags); + ret = __b43_shm_read16(dev, routing, offset); + spin_unlock_irqrestore(&wl->shm_lock, flags); + + return ret; +} + +void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) +{ if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); if (offset & 0x0003) { @@ -443,35 +455,47 @@ void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) (value >> 16) & 0xffff); b43_shm_control_word(dev, routing, (offset >> 2) + 1); b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff); - goto out; + return; } offset >>= 2; } b43_shm_control_word(dev, routing, offset); b43_write32(dev, B43_MMIO_SHM_DATA, value); -out: - spin_unlock_irqrestore(&wl->shm_lock, flags); } -void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) +void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) { struct b43_wl *wl = dev->wl; unsigned long flags; spin_lock_irqsave(&wl->shm_lock, flags); + __b43_shm_write32(dev, routing, offset, value); + spin_unlock_irqrestore(&wl->shm_lock, flags); +} + +void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) +{ if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); if (offset & 0x0003) { /* Unaligned access */ b43_shm_control_word(dev, routing, offset >> 2); b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value); - goto out; + return; } offset >>= 2; } b43_shm_control_word(dev, routing, offset); b43_write16(dev, B43_MMIO_SHM_DATA, value); -out: +} + +void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) +{ + struct b43_wl *wl = dev->wl; + unsigned long flags; + + spin_lock_irqsave(&wl->shm_lock, flags); + __b43_shm_write16(dev, routing, offset, value); spin_unlock_irqrestore(&wl->shm_lock, flags); } @@ -2463,6 +2487,19 @@ static void b43_gpio_cleanup(struct b43_wldev *dev) /* http://bcm-specs.sipsolutions.net/EnableMac */ void b43_mac_enable(struct b43_wldev *dev) { + if (b43_debug(dev, B43_DBG_FIRMWARE)) { + u16 fwstate; + + fwstate = b43_shm_read16(dev, B43_SHM_SHARED, + B43_SHM_SH_UCODESTAT); + if ((fwstate != B43_SHM_SH_UCODESTAT_SUSP) && + (fwstate != B43_SHM_SH_UCODESTAT_SLEEP)) { + b43err(dev->wl, "b43_mac_enable(): The firmware " + "should be suspended, but current state is %u\n", + fwstate); + } + } + dev->mac_suspended--; B43_WARN_ON(dev->mac_suspended < 0); if (dev->mac_suspended == 0) { @@ -2783,6 +2820,21 @@ static void b43_periodic_every30sec(struct b43_wldev *dev) static void b43_periodic_every15sec(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; + u16 wdr; + + if (dev->fw.opensource) { + /* Check if the firmware is still alive. + * It will reset the watchdog counter to 0 in its idle loop. */ + wdr = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_WATCHDOG_REG); + if (unlikely(wdr)) { + b43err(dev->wl, "Firmware watchdog: The firmware died!\n"); + b43_controller_restart(dev, "Firmware watchdog"); + return; + } else { + b43_shm_write16(dev, B43_SHM_SCRATCH, + B43_WATCHDOG_REG, 1); + } + } if (phy->type == B43_PHYTYPE_G) { //TODO: update_aci_moving_average diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h index dad23c42b42..f871a252cb5 100644 --- a/drivers/net/wireless/b43/main.h +++ b/drivers/net/wireless/b43/main.h @@ -95,9 +95,13 @@ void b43_tsf_read(struct b43_wldev *dev, u64 * tsf); void b43_tsf_write(struct b43_wldev *dev, u64 tsf); u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset); +u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset); u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset); +u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset); void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value); +void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value); void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value); +void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value); u64 b43_hf_read(struct b43_wldev *dev); void b43_hf_write(struct b43_wldev *dev, u64 value); diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index 8b1555d95f1..40159126759 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -586,7 +586,7 @@ void b43_pio_handle_txstatus(struct b43_wldev *dev, spin_lock(&q->lock); /* IRQs are already disabled. */ - info = (void *)pack->skb; + info = IEEE80211_SKB_CB(pack->skb); memset(&info->status, 0, sizeof(info->status)); b43_fill_txstatus_report(info, status); diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 11f53cb1139..4cca203992e 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -88,7 +88,7 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) goto out_unlock; err = 0; switch (state) { - case RFKILL_STATE_ON: + case RFKILL_STATE_UNBLOCKED: if (!dev->radio_hw_enable) { /* No luck. We can't toggle the hardware RF-kill * button from software. */ @@ -98,10 +98,13 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) if (!dev->phy.radio_on) b43_radio_turn_on(dev); break; - case RFKILL_STATE_OFF: + case RFKILL_STATE_SOFT_BLOCKED: if (dev->phy.radio_on) b43_radio_turn_off(dev, 0); break; + default: + b43warn(wl, "Received unexpected rfkill state %d.\n", state); + break; } out_unlock: mutex_unlock(&wl->mutex); diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index f9e1cff2aec..bf6f6c1ed4c 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -193,7 +193,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, const struct ieee80211_hdr *wlhdr = (const struct ieee80211_hdr *)fragment_data; int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)); - u16 fctl = le16_to_cpu(wlhdr->frame_control); + __le16 fctl = wlhdr->frame_control; struct ieee80211_rate *fbrate; u8 rate, rate_fb; int rate_ofdm, rate_fb_ofdm; @@ -259,7 +259,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, B43_TXH_MAC_KEYIDX; mac_ctl |= (key->algorithm << B43_TXH_MAC_KEYALG_SHIFT) & B43_TXH_MAC_KEYALG; - wlhdr_len = ieee80211_get_hdrlen(fctl); + wlhdr_len = ieee80211_hdrlen(fctl); iv_len = min((size_t) info->control.iv_len, ARRAY_SIZE(txhdr->iv)); memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len); @@ -317,8 +317,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, /* MAC control */ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) mac_ctl |= B43_TXH_MAC_ACK; - if (!(((fctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && - ((fctl & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PSPOLL))) + if (!ieee80211_is_pspoll(fctl)) mac_ctl |= B43_TXH_MAC_HWSEQ; if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) mac_ctl |= B43_TXH_MAC_STMSDU; @@ -509,7 +508,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) struct b43_plcp_hdr6 *plcp; struct ieee80211_hdr *wlhdr; const struct b43_rxhdr_fw4 *rxhdr = _rxhdr; - u16 fctl; + __le16 fctl; u16 phystat0, phystat3, chanstat, mactime; u32 macstat; u16 chanid; @@ -549,7 +548,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) goto drop; } wlhdr = (struct ieee80211_hdr *)(skb->data); - fctl = le16_to_cpu(wlhdr->frame_control); + fctl = wlhdr->frame_control; if (macstat & B43_RX_MAC_DEC) { unsigned int keyidx; @@ -564,7 +563,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) B43_WARN_ON(keyidx >= dev->max_nr_keys); if (dev->key[keyidx].algorithm != B43_SEC_ALGO_NONE) { - wlhdr_len = ieee80211_get_hdrlen(fctl); + wlhdr_len = ieee80211_hdrlen(fctl); if (unlikely(skb->len < (wlhdr_len + 3))) { b43dbg(dev->wl, "RX: Packet size underrun (3)\n"); @@ -604,9 +603,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) * of timestamp, i.e. about 65 milliseconds after the PHY received * the first symbol. */ - if (((fctl & (IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) - == (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON)) || - dev->wl->radiotap_enabled) { + if (ieee80211_is_beacon(fctl) || dev->wl->radiotap_enabled) { u16 low_mactime_now; b43_tsf_read(dev, &status.mactime); diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c index 203b0f42ac5..eb0243a2269 100644 --- a/drivers/net/wireless/b43legacy/dma.c +++ b/drivers/net/wireless/b43legacy/dma.c @@ -393,13 +393,13 @@ dma_addr_t map_descbuffer(struct b43legacy_dmaring *ring, dma_addr_t dmaaddr; if (tx) - dmaaddr = dma_map_single(ring->dev->dev->dma_dev, - buf, len, - DMA_TO_DEVICE); + dmaaddr = ssb_dma_map_single(ring->dev->dev, + buf, len, + DMA_TO_DEVICE); else - dmaaddr = dma_map_single(ring->dev->dev->dma_dev, - buf, len, - DMA_FROM_DEVICE); + dmaaddr = ssb_dma_map_single(ring->dev->dev, + buf, len, + DMA_FROM_DEVICE); return dmaaddr; } @@ -411,13 +411,13 @@ void unmap_descbuffer(struct b43legacy_dmaring *ring, int tx) { if (tx) - dma_unmap_single(ring->dev->dev->dma_dev, - addr, len, - DMA_TO_DEVICE); + ssb_dma_unmap_single(ring->dev->dev, + addr, len, + DMA_TO_DEVICE); else - dma_unmap_single(ring->dev->dev->dma_dev, - addr, len, - DMA_FROM_DEVICE); + ssb_dma_unmap_single(ring->dev->dev, + addr, len, + DMA_FROM_DEVICE); } static inline @@ -427,8 +427,8 @@ void sync_descbuffer_for_cpu(struct b43legacy_dmaring *ring, { B43legacy_WARN_ON(ring->tx); - dma_sync_single_for_cpu(ring->dev->dev->dma_dev, - addr, len, DMA_FROM_DEVICE); + ssb_dma_sync_single_for_cpu(ring->dev->dev, + addr, len, DMA_FROM_DEVICE); } static inline @@ -438,8 +438,8 @@ void sync_descbuffer_for_device(struct b43legacy_dmaring *ring, { B43legacy_WARN_ON(ring->tx); - dma_sync_single_for_device(ring->dev->dev->dma_dev, - addr, len, DMA_FROM_DEVICE); + ssb_dma_sync_single_for_device(ring->dev->dev, + addr, len, DMA_FROM_DEVICE); } static inline @@ -458,10 +458,11 @@ void free_descriptor_buffer(struct b43legacy_dmaring *ring, static int alloc_ringmemory(struct b43legacy_dmaring *ring) { - struct device *dma_dev = ring->dev->dev->dma_dev; - - ring->descbase = dma_alloc_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE, - &(ring->dmabase), GFP_KERNEL); + /* GFP flags must match the flags in free_ringmemory()! */ + ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev, + B43legacy_DMA_RINGMEMSIZE, + &(ring->dmabase), + GFP_KERNEL); if (!ring->descbase) { b43legacyerr(ring->dev->wl, "DMA ringmemory allocation" " failed\n"); @@ -474,10 +475,8 @@ static int alloc_ringmemory(struct b43legacy_dmaring *ring) static void free_ringmemory(struct b43legacy_dmaring *ring) { - struct device *dma_dev = ring->dev->dev->dma_dev; - - dma_free_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE, - ring->descbase, ring->dmabase); + ssb_dma_free_consistent(ring->dev->dev, B43legacy_DMA_RINGMEMSIZE, + ring->descbase, ring->dmabase, GFP_KERNEL); } /* Reset the RX DMA channel */ @@ -589,7 +588,7 @@ static bool b43legacy_dma_mapping_error(struct b43legacy_dmaring *ring, size_t buffersize, bool dma_to_device) { - if (unlikely(dma_mapping_error(addr))) + if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr))) return 1; switch (ring->type) { @@ -894,9 +893,9 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, goto err_kfree_meta; /* test for ability to dma to txhdr_cache */ - dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache, - sizeof(struct b43legacy_txhdr_fw3), - DMA_TO_DEVICE); + dma_test = ssb_dma_map_single(dev->dev, ring->txhdr_cache, + sizeof(struct b43legacy_txhdr_fw3), + DMA_TO_DEVICE); if (b43legacy_dma_mapping_error(ring, dma_test, sizeof(struct b43legacy_txhdr_fw3), 1)) { @@ -908,7 +907,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, if (!ring->txhdr_cache) goto err_kfree_meta; - dma_test = dma_map_single(dev->dev->dma_dev, + dma_test = ssb_dma_map_single(dev->dev, ring->txhdr_cache, sizeof(struct b43legacy_txhdr_fw3), DMA_TO_DEVICE); @@ -918,9 +917,9 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, goto err_kfree_txhdr_cache; } - dma_unmap_single(dev->dev->dma_dev, - dma_test, sizeof(struct b43legacy_txhdr_fw3), - DMA_TO_DEVICE); + ssb_dma_unmap_single(dev->dev, dma_test, + sizeof(struct b43legacy_txhdr_fw3), + DMA_TO_DEVICE); } ring->nr_slots = nr_slots; diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c index d178dfbb1c9..8935a302b22 100644 --- a/drivers/net/wireless/b43legacy/rfkill.c +++ b/drivers/net/wireless/b43legacy/rfkill.c @@ -90,7 +90,7 @@ static int b43legacy_rfkill_soft_toggle(void *data, enum rfkill_state state) goto out_unlock; err = 0; switch (state) { - case RFKILL_STATE_ON: + case RFKILL_STATE_UNBLOCKED: if (!dev->radio_hw_enable) { /* No luck. We can't toggle the hardware RF-kill * button from software. */ @@ -100,10 +100,14 @@ static int b43legacy_rfkill_soft_toggle(void *data, enum rfkill_state state) if (!dev->phy.radio_on) b43legacy_radio_turn_on(dev); break; - case RFKILL_STATE_OFF: + case RFKILL_STATE_SOFT_BLOCKED: if (dev->phy.radio_on) b43legacy_radio_turn_off(dev, 0); break; + default: + b43legacywarn(wl, "Received unexpected rfkill state %d.\n", + state); + break; } out_unlock: diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index 82dc04d5944..a3540787eb5 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -442,7 +442,7 @@ void b43legacy_rx(struct b43legacy_wldev *dev, struct b43legacy_plcp_hdr6 *plcp; struct ieee80211_hdr *wlhdr; const struct b43legacy_rxhdr_fw3 *rxhdr = _rxhdr; - u16 fctl; + __le16 fctl; u16 phystat0; u16 phystat3; u16 chanstat; @@ -480,7 +480,7 @@ void b43legacy_rx(struct b43legacy_wldev *dev, goto drop; } wlhdr = (struct ieee80211_hdr *)(skb->data); - fctl = le16_to_cpu(wlhdr->frame_control); + fctl = wlhdr->frame_control; if ((macstat & B43legacy_RX_MAC_DEC) && !(macstat & B43legacy_RX_MAC_DECERR)) { @@ -499,11 +499,11 @@ void b43legacy_rx(struct b43legacy_wldev *dev, if (dev->key[keyidx].algorithm != B43legacy_SEC_ALGO_NONE) { /* Remove PROTECTED flag to mark it as decrypted. */ - B43legacy_WARN_ON(!(fctl & IEEE80211_FCTL_PROTECTED)); - fctl &= ~IEEE80211_FCTL_PROTECTED; - wlhdr->frame_control = cpu_to_le16(fctl); + B43legacy_WARN_ON(!ieee80211_has_protected(fctl)); + fctl &= ~cpu_to_le16(IEEE80211_FCTL_PROTECTED); + wlhdr->frame_control = fctl; - wlhdr_len = ieee80211_get_hdrlen(fctl); + wlhdr_len = ieee80211_hdrlen(fctl); if (unlikely(skb->len < (wlhdr_len + 3))) { b43legacydbg(dev->wl, "RX: Packet size" " underrun3\n"); @@ -556,9 +556,7 @@ void b43legacy_rx(struct b43legacy_wldev *dev, * of timestamp, i.e. about 65 milliseconds after the PHY received * the first symbol. */ - if (((fctl & (IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) - == (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON)) || - dev->wl->radiotap_enabled) { + if (ieee80211_is_beacon(fctl) || dev->wl->radiotap_enabled) { u16 low_mactime_now; b43legacy_tsf_read(dev, &status.mactime); diff --git a/drivers/net/wireless/hostap/hostap.h b/drivers/net/wireless/hostap/hostap.h index 547ba84dc79..3a386a636cc 100644 --- a/drivers/net/wireless/hostap/hostap.h +++ b/drivers/net/wireless/hostap/hostap.h @@ -67,7 +67,8 @@ void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent, int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], struct iw_quality qual[], int buf_size, int aplist); -int prism2_ap_translate_scan(struct net_device *dev, char *buffer); +int prism2_ap_translate_scan(struct net_device *dev, + struct iw_request_info *info, char *buffer); int prism2_hostapd(struct ap_data *ap, struct prism2_hostapd_param *param); diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 0acd9589c48..06b23df8f69 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -2420,7 +2420,8 @@ int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], /* Translate our list of Access Points & Stations to a card independant * format that the Wireless Tools will understand - Jean II */ -int prism2_ap_translate_scan(struct net_device *dev, char *buffer) +int prism2_ap_translate_scan(struct net_device *dev, + struct iw_request_info *info, char *buffer) { struct hostap_interface *iface; local_info_t *local; @@ -2449,8 +2450,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, sta->addr, ETH_ALEN); iwe.len = IW_EV_ADDR_LEN; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_ADDR_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); /* Use the mode to indicate if it's a station or * an Access Point */ @@ -2461,8 +2462,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) else iwe.u.mode = IW_MODE_INFRA; iwe.len = IW_EV_UINT_LEN; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); /* Some quality */ memset(&iwe, 0, sizeof(iwe)); @@ -2477,8 +2478,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence); iwe.u.qual.updated = sta->last_rx_updated; iwe.len = IW_EV_QUAL_LEN; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); #ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT if (sta->ap) { @@ -2486,8 +2487,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) iwe.cmd = SIOCGIWESSID; iwe.u.data.length = sta->u.ap.ssid_len; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, sta->u.ap.ssid); memset(&iwe, 0, sizeof(iwe)); @@ -2497,10 +2498,9 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; else iwe.u.data.flags = IW_ENCODE_DISABLED; - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, - sta->u.ap.ssid - /* 0 byte memcpy */); + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, + sta->u.ap.ssid); if (sta->u.ap.channel > 0 && sta->u.ap.channel <= FREQ_COUNT) { @@ -2510,7 +2510,7 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) * 100000; iwe.u.freq.e = 1; current_ev = iwe_stream_add_event( - current_ev, end_buf, &iwe, + info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); } @@ -2519,8 +2519,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) sprintf(buf, "beacon_interval=%d", sta->listen_interval); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, buf); + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, buf); } #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index 0ca0bfeb0ad..ed52d98317c 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1793,6 +1793,7 @@ static int prism2_ioctl_siwscan(struct net_device *dev, #ifndef PRISM2_NO_STATION_MODES static char * __prism2_translate_scan(local_info_t *local, + struct iw_request_info *info, struct hfa384x_hostscan_result *scan, struct hostap_bss_info *bss, char *current_ev, char *end_buf) @@ -1823,7 +1824,7 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); /* Other entries will be displayed in the order we give them */ @@ -1832,7 +1833,8 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.cmd = SIOCGIWESSID; iwe.u.data.length = ssid_len; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ssid); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, ssid); memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWMODE; @@ -1847,8 +1849,8 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); } memset(&iwe, 0, sizeof(iwe)); @@ -1864,8 +1866,8 @@ static char * __prism2_translate_scan(local_info_t *local, if (chan > 0) { iwe.u.freq.m = freq_list[chan - 1] * 100000; iwe.u.freq.e = 1; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_FREQ_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); } if (scan) { @@ -1884,8 +1886,8 @@ static char * __prism2_translate_scan(local_info_t *local, | IW_QUAL_NOISE_UPDATED | IW_QUAL_QUAL_INVALID | IW_QUAL_DBM; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); } memset(&iwe, 0, sizeof(iwe)); @@ -1895,13 +1897,13 @@ static char * __prism2_translate_scan(local_info_t *local, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ""); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, ""); /* TODO: add SuppRates into BSS table */ if (scan) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWRATE; - current_val = current_ev + IW_EV_LCP_LEN; + current_val = current_ev + iwe_stream_lcp_len(info); pos = scan->sup_rates; for (i = 0; i < sizeof(scan->sup_rates); i++) { if (pos[i] == 0) @@ -1909,11 +1911,11 @@ static char * __prism2_translate_scan(local_info_t *local, /* Bit rate given in 500 kb/s units (+ 0x80) */ iwe.u.bitrate.value = ((pos[i] & 0x7f) * 500000); current_val = iwe_stream_add_value( - current_ev, current_val, end_buf, &iwe, + info, current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN); } /* Check if we added any event */ - if ((current_val - current_ev) > IW_EV_LCP_LEN) + if ((current_val - current_ev) > iwe_stream_lcp_len(info)) current_ev = current_val; } @@ -1924,15 +1926,15 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.cmd = IWEVCUSTOM; sprintf(buf, "bcn_int=%d", le16_to_cpu(scan->beacon_interval)); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, - buf); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, buf); memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVCUSTOM; sprintf(buf, "resp_rate=%d", le16_to_cpu(scan->rate)); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, - buf); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, buf); if (local->last_scan_type == PRISM2_HOSTSCAN && (capabilities & WLAN_CAPABILITY_IBSS)) { @@ -1940,8 +1942,8 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.cmd = IWEVCUSTOM; sprintf(buf, "atim=%d", le16_to_cpu(scan->atim)); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, buf); + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, buf); } } kfree(buf); @@ -1950,16 +1952,16 @@ static char * __prism2_translate_scan(local_info_t *local, memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->wpa_ie_len; - current_ev = iwe_stream_add_point( - current_ev, end_buf, &iwe, bss->wpa_ie); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->wpa_ie); } if (bss && bss->rsn_ie_len > 0 && bss->rsn_ie_len <= MAX_WPA_IE_LEN) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->rsn_ie_len; - current_ev = iwe_stream_add_point( - current_ev, end_buf, &iwe, bss->rsn_ie); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->rsn_ie); } return current_ev; @@ -1969,6 +1971,7 @@ static char * __prism2_translate_scan(local_info_t *local, /* Translate scan data returned from the card to a card independant * format that the Wireless Tools will understand - Jean II */ static inline int prism2_translate_scan(local_info_t *local, + struct iw_request_info *info, char *buffer, int buflen) { struct hfa384x_hostscan_result *scan; @@ -1999,13 +2002,14 @@ static inline int prism2_translate_scan(local_info_t *local, if (memcmp(bss->bssid, scan->bssid, ETH_ALEN) == 0) { bss->included = 1; current_ev = __prism2_translate_scan( - local, scan, bss, current_ev, end_buf); + local, info, scan, bss, current_ev, + end_buf); found++; } } if (!found) { current_ev = __prism2_translate_scan( - local, scan, NULL, current_ev, end_buf); + local, info, scan, NULL, current_ev, end_buf); } /* Check if there is space for one more entry */ if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { @@ -2023,7 +2027,7 @@ static inline int prism2_translate_scan(local_info_t *local, bss = list_entry(ptr, struct hostap_bss_info, list); if (bss->included) continue; - current_ev = __prism2_translate_scan(local, NULL, bss, + current_ev = __prism2_translate_scan(local, info, NULL, bss, current_ev, end_buf); /* Check if there is space for one more entry */ if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { @@ -2070,7 +2074,7 @@ static inline int prism2_ioctl_giwscan_sta(struct net_device *dev, } local->scan_timestamp = 0; - res = prism2_translate_scan(local, extra, data->length); + res = prism2_translate_scan(local, info, extra, data->length); if (res >= 0) { data->length = res; @@ -2103,7 +2107,7 @@ static int prism2_ioctl_giwscan(struct net_device *dev, * Jean II */ /* Translate to WE format */ - res = prism2_ap_translate_scan(dev, extra); + res = prism2_ap_translate_scan(dev, info, extra); if (res >= 0) { printk(KERN_DEBUG "Scan result translation succeeded " "(length=%d)\n", res); diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index a382c007892..d7ea32f3969 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -8,7 +8,7 @@ config IWLCORE select MAC80211_LEDS if IWLWIFI_LEDS select LEDS_CLASS if IWLWIFI_LEDS select RFKILL if IWLWIFI_RFKILL - select RFKILL_INPUT if IWLWIFI_RFKILL + select RFKILL_INPUT if (IWLWIFI_RFKILL && INPUT) config IWLWIFI_LEDS bool diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c index 5f098747cf9..ffefbb487e1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c +++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.c @@ -54,17 +54,20 @@ static int iwl_rfkill_soft_rf_kill(void *data, enum rfkill_state state) mutex_lock(&priv->mutex); switch (state) { - case RFKILL_STATE_ON: + case RFKILL_STATE_UNBLOCKED: iwl_radio_kill_sw_enable_radio(priv); /* if HW rf-kill is set dont allow ON state */ if (iwl_is_rfkill(priv)) err = -EBUSY; break; - case RFKILL_STATE_OFF: + case RFKILL_STATE_SOFT_BLOCKED: iwl_radio_kill_sw_disable_radio(priv); if (!iwl_is_rfkill(priv)) err = -EBUSY; break; + default: + IWL_WARNING("we recieved unexpected RFKILL state %d\n", state); + break; } mutex_unlock(&priv->mutex); @@ -95,6 +98,7 @@ int iwl_rfkill_init(struct iwl_priv *priv) priv->rfkill_mngr.rfkill->dev.class->suspend = NULL; priv->rfkill_mngr.rfkill->dev.class->resume = NULL; +#if defined(CONFIG_RFKILL_INPUT) || defined(CONFIG_RFKILL_INPUT_MODULE) priv->rfkill_mngr.input_dev = input_allocate_device(); if (!priv->rfkill_mngr.input_dev) { IWL_ERROR("Unable to allocate rfkill input device.\n"); @@ -109,6 +113,7 @@ int iwl_rfkill_init(struct iwl_priv *priv) priv->rfkill_mngr.input_dev->dev.parent = device; priv->rfkill_mngr.input_dev->evbit[0] = BIT(EV_KEY); set_bit(KEY_WLAN, priv->rfkill_mngr.input_dev->keybit); +#endif ret = rfkill_register(priv->rfkill_mngr.rfkill); if (ret) { @@ -116,11 +121,13 @@ int iwl_rfkill_init(struct iwl_priv *priv) goto free_input_dev; } +#if defined(CONFIG_RFKILL_INPUT) || defined(CONFIG_RFKILL_INPUT_MODULE) ret = input_register_device(priv->rfkill_mngr.input_dev); if (ret) { IWL_ERROR("Unable to register rfkill input device: %d\n", ret); goto unregister_rfkill; } +#endif IWL_DEBUG_RF_KILL("RFKILL initialization complete.\n"); return ret; @@ -130,8 +137,10 @@ unregister_rfkill: priv->rfkill_mngr.rfkill = NULL; free_input_dev: +#if defined(CONFIG_RFKILL_INPUT) || defined(CONFIG_RFKILL_INPUT_MODULE) input_free_device(priv->rfkill_mngr.input_dev); priv->rfkill_mngr.input_dev = NULL; +#endif freed_rfkill: if (priv->rfkill_mngr.rfkill != NULL) @@ -147,13 +156,16 @@ EXPORT_SYMBOL(iwl_rfkill_init); void iwl_rfkill_unregister(struct iwl_priv *priv) { +#if defined(CONFIG_RFKILL_INPUT) || defined(CONFIG_RFKILL_INPUT_MODULE) if (priv->rfkill_mngr.input_dev) input_unregister_device(priv->rfkill_mngr.input_dev); + input_free_device(priv->rfkill_mngr.input_dev); + priv->rfkill_mngr.input_dev = NULL; +#endif if (priv->rfkill_mngr.rfkill) rfkill_unregister(priv->rfkill_mngr.rfkill); - priv->rfkill_mngr.input_dev = NULL; priv->rfkill_mngr.rfkill = NULL; } EXPORT_SYMBOL(iwl_rfkill_unregister); diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index d448c9702a0..343ed38f772 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -776,8 +776,9 @@ out: #define MAX_CUSTOM_LEN 64 static inline char *lbs_translate_scan(struct lbs_private *priv, - char *start, char *stop, - struct bss_descriptor *bss) + struct iw_request_info *info, + char *start, char *stop, + struct bss_descriptor *bss) { struct chan_freq_power *cfp; char *current_val; /* For rates */ @@ -801,24 +802,24 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, &bss->bssid, ETH_ALEN); - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_ADDR_LEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_ADDR_LEN); /* SSID */ iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; iwe.u.data.length = min((uint32_t) bss->ssid_len, (uint32_t) IW_ESSID_MAX_SIZE); - start = iwe_stream_add_point(start, stop, &iwe, bss->ssid); + start = iwe_stream_add_point(info, start, stop, &iwe, bss->ssid); /* Mode */ iwe.cmd = SIOCGIWMODE; iwe.u.mode = bss->mode; - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_UINT_LEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_UINT_LEN); /* Frequency */ iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = (long)cfp->freq * 100000; iwe.u.freq.e = 1; - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_FREQ_LEN); /* Add quality statistics */ iwe.cmd = IWEVQUAL; @@ -852,7 +853,7 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, nf = priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE; iwe.u.qual.level = CAL_RSSI(snr, nf); } - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_QUAL_LEN); /* Add encryption capability */ iwe.cmd = SIOCGIWENCODE; @@ -862,9 +863,9 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, iwe.u.data.flags = IW_ENCODE_DISABLED; } iwe.u.data.length = 0; - start = iwe_stream_add_point(start, stop, &iwe, bss->ssid); + start = iwe_stream_add_point(info, start, stop, &iwe, bss->ssid); - current_val = start + IW_EV_LCP_LEN; + current_val = start + iwe_stream_lcp_len(info); iwe.cmd = SIOCGIWRATE; iwe.u.bitrate.fixed = 0; @@ -874,19 +875,19 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, for (j = 0; bss->rates[j] && (j < sizeof(bss->rates)); j++) { /* Bit rate given in 500 kb/s units */ iwe.u.bitrate.value = bss->rates[j] * 500000; - current_val = iwe_stream_add_value(start, current_val, - stop, &iwe, IW_EV_PARAM_LEN); + current_val = iwe_stream_add_value(info, start, current_val, + stop, &iwe, IW_EV_PARAM_LEN); } if ((bss->mode == IW_MODE_ADHOC) && priv->adhoccreate && !lbs_ssid_cmp(priv->curbssparams.ssid, priv->curbssparams.ssid_len, bss->ssid, bss->ssid_len)) { iwe.u.bitrate.value = 22 * 500000; - current_val = iwe_stream_add_value(start, current_val, + current_val = iwe_stream_add_value(info, start, current_val, stop, &iwe, IW_EV_PARAM_LEN); } /* Check if we added any event */ - if((current_val - start) > IW_EV_LCP_LEN) + if ((current_val - start) > iwe_stream_lcp_len(info)) start = current_val; memset(&iwe, 0, sizeof(iwe)); @@ -895,7 +896,7 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, memcpy(buf, bss->wpa_ie, bss->wpa_ie_len); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->wpa_ie_len; - start = iwe_stream_add_point(start, stop, &iwe, buf); + start = iwe_stream_add_point(info, start, stop, &iwe, buf); } memset(&iwe, 0, sizeof(iwe)); @@ -904,7 +905,7 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, memcpy(buf, bss->rsn_ie, bss->rsn_ie_len); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->rsn_ie_len; - start = iwe_stream_add_point(start, stop, &iwe, buf); + start = iwe_stream_add_point(info, start, stop, &iwe, buf); } if (bss->mesh) { @@ -915,7 +916,8 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, p += snprintf(p, MAX_CUSTOM_LEN, "mesh-type: olpc"); iwe.u.data.length = p - custom; if (iwe.u.data.length) - start = iwe_stream_add_point(start, stop, &iwe, custom); + start = iwe_stream_add_point(info, start, stop, + &iwe, custom); } out: @@ -1036,7 +1038,7 @@ int lbs_get_scan(struct net_device *dev, struct iw_request_info *info, } /* Translate to WE format this entry */ - next_ev = lbs_translate_scan(priv, ev, stop, iter_bss); + next_ev = lbs_translate_scan(priv, info, ev, stop, iter_bss); if (next_ev == NULL) continue; ev = next_ev; diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 8da352ae682..5d30c57e396 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -430,15 +430,16 @@ static int __init init_mac80211_hwsim(void) hwsim_radios[i] = hw; data = hw->priv; - data->dev = device_create(hwsim_class, NULL, 0, "hwsim%d", i); + data->dev = device_create_drvdata(hwsim_class, NULL, 0, hw, + "hwsim%d", i); if (IS_ERR(data->dev)) { - printk(KERN_DEBUG "mac80211_hwsim: device_create " + printk(KERN_DEBUG + "mac80211_hwsim: device_create_drvdata " "failed (%ld)\n", PTR_ERR(data->dev)); err = -ENOMEM; goto failed; } data->dev->driver = &mac80211_hwsim_driver; - dev_set_drvdata(data->dev, hw); SET_IEEE80211_DEV(hw, data->dev); addr[3] = i >> 8; diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 6d13a0d15a0..b047306bf38 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -4046,6 +4046,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev, * format that the Wireless Tools will understand - Jean II * Return message length or -errno for fatal errors */ static inline char *orinoco_translate_scan(struct net_device *dev, + struct iw_request_info *info, char *current_ev, char *end_buf, union hermes_scan_info *bss, @@ -4062,7 +4063,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, bss->a.bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); /* Other entries will be displayed in the order we give them */ @@ -4072,7 +4074,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, iwe.u.data.length = 32; iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->a.essid); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->a.essid); /* Add mode */ iwe.cmd = SIOCGIWMODE; @@ -4082,7 +4085,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); } channel = bss->s.channel; @@ -4091,7 +4095,7 @@ static inline char *orinoco_translate_scan(struct net_device *dev, iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = channel_frequency[channel-1] * 100000; iwe.u.freq.e = 1; - current_ev = iwe_stream_add_event(current_ev, end_buf, + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); } @@ -4106,7 +4110,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; else iwe.u.qual.qual = 0; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); /* Add encryption capability */ iwe.cmd = SIOCGIWENCODE; @@ -4115,7 +4120,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->a.essid); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->a.essid); /* Add EXTRA: Age to display seconds since last beacon/probe response * for given network. */ @@ -4126,11 +4132,12 @@ static inline char *orinoco_translate_scan(struct net_device *dev, jiffies_to_msecs(jiffies - last_scanned)); iwe.u.data.length = p - custom; if (iwe.u.data.length) - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, custom); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); /* Bit rate is not available in Lucent/Agere firmwares */ if (priv->firmware_type != FIRMWARE_TYPE_AGERE) { - char *current_val = current_ev + IW_EV_LCP_LEN; + char *current_val = current_ev + iwe_stream_lcp_len(info); int i; int step; @@ -4149,12 +4156,13 @@ static inline char *orinoco_translate_scan(struct net_device *dev, break; /* Bit rate given in 500 kb/s units (+ 0x80) */ iwe.u.bitrate.value = ((bss->p.rates[i] & 0x7f) * 500000); - current_val = iwe_stream_add_value(current_ev, current_val, + current_val = iwe_stream_add_value(info, current_ev, + current_val, end_buf, &iwe, IW_EV_PARAM_LEN); } /* Check if we added any event */ - if ((current_val - current_ev) > IW_EV_LCP_LEN) + if ((current_val - current_ev) > iwe_stream_lcp_len(info)) current_ev = current_val; } @@ -4190,7 +4198,7 @@ static int orinoco_ioctl_getscan(struct net_device *dev, list_for_each_entry(bss, &priv->bss_list, list) { /* Translate to WE format this entry */ - current_ev = orinoco_translate_scan(dev, current_ev, + current_ev = orinoco_translate_scan(dev, info, current_ev, extra + srq->length, &bss->bss, bss->last_scanned); diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 5b375b28903..97fa14e0a47 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -571,8 +571,9 @@ prism54_set_scan(struct net_device *dev, struct iw_request_info *info, */ static char * -prism54_translate_bss(struct net_device *ndev, char *current_ev, - char *end_buf, struct obj_bss *bss, char noise) +prism54_translate_bss(struct net_device *ndev, struct iw_request_info *info, + char *current_ev, char *end_buf, struct obj_bss *bss, + char noise) { struct iw_event iwe; /* Temporary buffer */ short cap; @@ -584,8 +585,8 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev, memcpy(iwe.u.ap_addr.sa_data, bss->address, 6); iwe.u.ap_addr.sa_family = ARPHRD_ETHER; iwe.cmd = SIOCGIWAP; - current_ev = - iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); /* The following entries will be displayed in the same order we give them */ @@ -593,7 +594,7 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev, iwe.u.data.length = bss->ssid.length; iwe.u.data.flags = 1; iwe.cmd = SIOCGIWESSID; - current_ev = iwe_stream_add_point(current_ev, end_buf, + current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, bss->ssid.octets); /* Capabilities */ @@ -610,9 +611,8 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev, iwe.u.mode = IW_MODE_ADHOC; iwe.cmd = SIOCGIWMODE; if (iwe.u.mode) - current_ev = - iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); /* Encryption capability */ if (cap & CAP_CRYPT) @@ -621,14 +621,15 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev, iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; iwe.cmd = SIOCGIWENCODE; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, NULL); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, NULL); /* Add frequency. (short) bss->channel is the frequency in MHz */ iwe.u.freq.m = bss->channel; iwe.u.freq.e = 6; iwe.cmd = SIOCGIWFREQ; - current_ev = - iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); /* Add quality statistics */ iwe.u.qual.level = bss->rssi; @@ -636,20 +637,20 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev, /* do a simple SNR for quality */ iwe.u.qual.qual = bss->rssi - noise; iwe.cmd = IWEVQUAL; - current_ev = - iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); /* Add WPA/RSN Information Element, if any */ wpa_ie_len = prism54_wpa_bss_ie_get(priv, bss->address, wpa_ie); if (wpa_ie_len > 0) { iwe.cmd = IWEVGENIE; iwe.u.data.length = min(wpa_ie_len, (size_t)MAX_WPA_IE_LEN); - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, wpa_ie); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, wpa_ie); } /* Do the bitrates */ { - char * current_val = current_ev + IW_EV_LCP_LEN; + char *current_val = current_ev + iwe_stream_lcp_len(info); int i; int mask; @@ -662,14 +663,14 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev, for(i = 0; i < sizeof(scan_rate_list); i++) { if(bss->rates & mask) { iwe.u.bitrate.value = (scan_rate_list[i] * 500000); - current_val = iwe_stream_add_value(current_ev, current_val, - end_buf, &iwe, - IW_EV_PARAM_LEN); + current_val = iwe_stream_add_value( + info, current_ev, current_val, + end_buf, &iwe, IW_EV_PARAM_LEN); } mask <<= 1; } /* Check if we added any event */ - if ((current_val - current_ev) > IW_EV_LCP_LEN) + if ((current_val - current_ev) > iwe_stream_lcp_len(info)) current_ev = current_val; } @@ -710,7 +711,7 @@ prism54_get_scan(struct net_device *ndev, struct iw_request_info *info, /* ok now, scan the list and translate its info */ for (i = 0; i < (int) bsslist->nr; i++) { - current_ev = prism54_translate_bss(ndev, current_ev, + current_ev = prism54_translate_bss(ndev, info, current_ev, extra + dwrq->length, &(bsslist->bsslist[i]), noise); @@ -2704,6 +2705,7 @@ prism2_ioctl_scan_req(struct net_device *ndev, struct prism2_hostapd_param *param) { islpci_private *priv = netdev_priv(ndev); + struct iw_request_info info; int i, rvalue; struct obj_bsslist *bsslist; u32 noise = 0; @@ -2727,9 +2729,12 @@ prism2_ioctl_scan_req(struct net_device *ndev, rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r); bsslist = r.ptr; + info.cmd = PRISM54_HOSTAPD; + info.flags = 0; + /* ok now, scan the list and translate its info */ for (i = 0; i < min(IW_MAX_AP, (int) bsslist->nr); i++) - current_ev = prism54_translate_bss(ndev, current_ev, + current_ev = prism54_translate_bss(ndev, &info, current_ev, extra + IW_SCAN_MAX_DATA, &(bsslist->bsslist[i]), noise); diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index f001f2afd05..00e965b9da7 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -1648,7 +1648,9 @@ static int rndis_iw_set_scan(struct net_device *dev, static char *rndis_translate_scan(struct net_device *dev, - char *cev, char *end_buf, struct ndis_80211_bssid_ex *bssid) + struct iw_request_info *info, char *cev, + char *end_buf, + struct ndis_80211_bssid_ex *bssid) { #ifdef DEBUG struct usbnet *usbdev = dev->priv; @@ -1667,14 +1669,14 @@ static char *rndis_translate_scan(struct net_device *dev, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, bssid->mac, ETH_ALEN); - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_ADDR_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_ADDR_LEN); devdbg(usbdev, "SSID(%d) %s", le32_to_cpu(bssid->ssid.length), bssid->ssid.essid); iwe.cmd = SIOCGIWESSID; iwe.u.essid.length = le32_to_cpu(bssid->ssid.length); iwe.u.essid.flags = 1; - cev = iwe_stream_add_point(cev, end_buf, &iwe, bssid->ssid.essid); + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, bssid->ssid.essid); devdbg(usbdev, "MODE %d", le32_to_cpu(bssid->net_infra)); iwe.cmd = SIOCGIWMODE; @@ -1690,12 +1692,12 @@ static char *rndis_translate_scan(struct net_device *dev, iwe.u.mode = IW_MODE_AUTO; break; } - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_UINT_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_UINT_LEN); devdbg(usbdev, "FREQ %d kHz", le32_to_cpu(bssid->config.ds_config)); iwe.cmd = SIOCGIWFREQ; dsconfig_to_freq(le32_to_cpu(bssid->config.ds_config), &iwe.u.freq); - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_FREQ_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_FREQ_LEN); devdbg(usbdev, "QUAL %d", le32_to_cpu(bssid->rssi)); iwe.cmd = IWEVQUAL; @@ -1704,7 +1706,7 @@ static char *rndis_translate_scan(struct net_device *dev, iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_INVALID; - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_QUAL_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_QUAL_LEN); devdbg(usbdev, "ENCODE %d", le32_to_cpu(bssid->privacy)); iwe.cmd = SIOCGIWENCODE; @@ -1714,10 +1716,10 @@ static char *rndis_translate_scan(struct net_device *dev, else iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; - cev = iwe_stream_add_point(cev, end_buf, &iwe, NULL); + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, NULL); devdbg(usbdev, "RATES:"); - current_val = cev + IW_EV_LCP_LEN; + current_val = cev + iwe_stream_lcp_len(info); iwe.cmd = SIOCGIWRATE; for (i = 0; i < sizeof(bssid->rates); i++) { if (bssid->rates[i] & 0x7f) { @@ -1725,13 +1727,13 @@ static char *rndis_translate_scan(struct net_device *dev, ((bssid->rates[i] & 0x7f) * 500000); devdbg(usbdev, " %d", iwe.u.bitrate.value); - current_val = iwe_stream_add_value(cev, + current_val = iwe_stream_add_value(info, cev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN); } } - if ((current_val - cev) > IW_EV_LCP_LEN) + if ((current_val - cev) > iwe_stream_lcp_len(info)) cev = current_val; beacon = le32_to_cpu(bssid->config.beacon_period); @@ -1739,14 +1741,14 @@ static char *rndis_translate_scan(struct net_device *dev, iwe.cmd = IWEVCUSTOM; snprintf(sbuf, sizeof(sbuf), "bcn_int=%d", beacon); iwe.u.data.length = strlen(sbuf); - cev = iwe_stream_add_point(cev, end_buf, &iwe, sbuf); + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, sbuf); atim = le32_to_cpu(bssid->config.atim_window); devdbg(usbdev, "ATIM %d", atim); iwe.cmd = IWEVCUSTOM; snprintf(sbuf, sizeof(sbuf), "atim=%u", atim); iwe.u.data.length = strlen(sbuf); - cev = iwe_stream_add_point(cev, end_buf, &iwe, sbuf); + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, sbuf); ie = (void *)(bssid->ies + sizeof(struct ndis_80211_fixed_ies)); ie_len = min(bssid_len - (int)sizeof(*bssid), @@ -1760,7 +1762,7 @@ static char *rndis_translate_scan(struct net_device *dev, (ie->id == MFIE_TYPE_RSN) ? 2 : 1); iwe.cmd = IWEVGENIE; iwe.u.data.length = min(ie->len + 2, MAX_WPA_IE_LEN); - cev = iwe_stream_add_point(cev, end_buf, &iwe, + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, (u8 *)ie); } @@ -1803,8 +1805,8 @@ static int rndis_iw_get_scan(struct net_device *dev, devdbg(usbdev, "SIOCGIWSCAN: %d BSSIDs found", count); while (count && ((void *)bssid + bssid_len) <= (buf + len)) { - cev = rndis_translate_scan(dev, cev, extra + IW_SCAN_MAX_DATA, - bssid); + cev = rndis_translate_scan(dev, info, cev, + extra + IW_SCAN_MAX_DATA, bssid); bssid = (void *)bssid + bssid_len; bssid_len = le32_to_cpu(bssid->length); count--; diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index bb3d83560d0..b3dffcfed83 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -632,15 +632,15 @@ static void rt2400pci_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; rt2x00_desc_read(entry_priv->desc, 2, &word); - rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, - entry->queue->data_size); + rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, entry->skb->len); rt2x00_desc_write(entry_priv->desc, 2, word); rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, entry_priv->data_dma); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); rt2x00_desc_write(entry_priv->desc, 1, word); rt2x00_desc_read(entry_priv->desc, 0, &word); @@ -1012,7 +1012,7 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * Start writing the descriptor words. */ rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, entry_priv->data_dma); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); rt2x00_desc_write(entry_priv->desc, 1, word); rt2x00_desc_read(txd, 2, &word); @@ -1154,7 +1154,7 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, } txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, &txdesc); + rt2x00lib_txdone(entry, &txdesc); } } @@ -1366,7 +1366,7 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = 0; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); @@ -1412,9 +1412,10 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt2400pci_probe_hw_mode(rt2x00dev); /* - * This device requires the atim queue + * This device requires the atim queue and DMA-mapped skbs. */ __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1526,7 +1527,7 @@ static int rt2400pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) * Write entire beacon with descriptor to register, * and kick the beacon generator. */ - memcpy(entry_priv->data, skb->data, skb->len); + rt2x00queue_map_txskb(rt2x00dev, intf->beacon->skb); rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc); rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON); diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 3c956b91c4e..0423c251c78 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -727,10 +727,11 @@ static void rt2500pci_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, entry_priv->data_dma); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); rt2x00_desc_write(entry_priv->desc, 1, word); rt2x00_desc_read(entry_priv->desc, 0, &word); @@ -1171,7 +1172,7 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * Start writing the descriptor words. */ rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, entry_priv->data_dma); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); rt2x00_desc_write(entry_priv->desc, 1, word); rt2x00_desc_read(txd, 2, &word); @@ -1311,7 +1312,7 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, } txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, &txdesc); + rt2x00lib_txdone(entry, &txdesc); } } @@ -1688,7 +1689,7 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->extra_tx_headroom = 0; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); @@ -1752,9 +1753,10 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt2500pci_probe_hw_mode(rt2x00dev); /* - * This device requires the atim queue + * This device requires the atim queue and DMA-mapped skbs. */ __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1842,7 +1844,7 @@ static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) * Write entire beacon with descriptor to register, * and kick the beacon generator. */ - memcpy(entry_priv->data, skb->data, skb->len); + rt2x00queue_map_txskb(rt2x00dev, intf->beacon->skb); rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc); rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON); diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 0462d6d35b8..0dd1cb537b9 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1594,7 +1594,7 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); @@ -1678,7 +1678,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) static int rt2500usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct queue_entry_priv_usb_bcn *bcn_priv; diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 52d8e968821..6842464dcf3 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -44,7 +44,7 @@ /* * Module information. */ -#define DRV_VERSION "2.1.7" +#define DRV_VERSION "2.1.8" #define DRV_PROJECT "http://rt2x00.serialmonkey.com" /* @@ -111,33 +111,6 @@ #define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) /* - * IEEE802.11 header defines - */ -static inline int is_rts_frame(u16 fc) -{ - return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_RTS)); -} - -static inline int is_cts_frame(u16 fc) -{ - return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_CTS)); -} - -static inline int is_probe_resp(u16 fc) -{ - return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP)); -} - -static inline int is_beacon(u16 fc) -{ - return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)); -} - -/* * Chipset identification * The chipset on the device is composed of a RT and RF chip. * The chipset combination is important for determining device capabilities. @@ -628,6 +601,7 @@ enum rt2x00_flags { DRIVER_REQUIRE_BEACON_GUARD, DRIVER_REQUIRE_ATIM_QUEUE, DRIVER_REQUIRE_SCHEDULED, + DRIVER_REQUIRE_DMA, /* * Driver configuration @@ -652,11 +626,7 @@ struct rt2x00_dev { * When accessing this variable, the rt2x00dev_{pci,usb} * macro's should be used for correct typecasting. */ - void *dev; -#define rt2x00dev_pci(__dev) ( (struct pci_dev *)(__dev)->dev ) -#define rt2x00dev_usb(__dev) ( (struct usb_interface *)(__dev)->dev ) -#define rt2x00dev_usb_dev(__dev)\ - ( (struct usb_device *)interface_to_usbdev(rt2x00dev_usb(__dev)) ) + struct device *dev; /* * Callback functions. @@ -931,10 +901,11 @@ static inline u16 get_duration_res(const unsigned int size, const u8 rate) } /** - * rt2x00queue_alloc_rxskb - allocate a skb for RX purposes. - * @queue: The queue for which the skb will be applicable. + * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: The skb to map. */ -struct sk_buff *rt2x00queue_alloc_rxskb(struct data_queue *queue); +void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); /** * rt2x00queue_create_tx_descriptor - Create TX descriptor from mac80211 input @@ -985,26 +956,14 @@ struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue, enum queue_index index); -/** - * rt2x00queue_index_inc - Index incrementation function - * @queue: Queue (&struct data_queue) to perform the action on. - * @index: Index type (&enum queue_index) to perform the action on. - * - * This function will increase the requested index on the queue, - * it will grab the appropriate locks and handle queue overflow events by - * resetting the index to the start of the queue. - */ -void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index); - - /* * Interrupt context handlers. */ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev); void rt2x00lib_txdone(struct queue_entry *entry, struct txdone_entry_desc *txdesc); -void rt2x00lib_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc); +void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry); /* * mac80211 handlers. diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index cc4fee105ed..ae8ab71fe47 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -469,12 +469,19 @@ static void rt2x00lib_intf_scheduled(struct work_struct *work) static void rt2x00lib_beacondone_iter(void *data, u8 *mac, struct ieee80211_vif *vif) { + struct rt2x00_dev *rt2x00dev = data; struct rt2x00_intf *intf = vif_to_intf(vif); if (vif->type != IEEE80211_IF_TYPE_AP && vif->type != IEEE80211_IF_TYPE_IBSS) return; + /* + * Clean up the beacon skb. + */ + rt2x00queue_free_skb(rt2x00dev, intf->beacon->skb); + intf->beacon->skb = NULL; + spin_lock(&intf->lock); intf->delayed_flags |= DELAYED_UPDATE_BEACON; spin_unlock(&intf->lock); @@ -498,6 +505,12 @@ void rt2x00lib_txdone(struct queue_entry *entry, { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); + + /* + * Unmap the skb. + */ + rt2x00queue_unmap_skb(rt2x00dev, entry->skb); /* * Send frame to debugfs immediately, after this call is completed @@ -546,39 +559,77 @@ void rt2x00lib_txdone(struct queue_entry *entry, ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb); else dev_kfree_skb_irq(entry->skb); + + /* + * Make this entry available for reuse. + */ entry->skb = NULL; + entry->flags = 0; + + rt2x00dev->ops->lib->init_txentry(rt2x00dev, entry); + + __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); + + /* + * If the data queue was below the threshold before the txdone + * handler we must make sure the packet queue in the mac80211 stack + * is reenabled when the txdone handler has finished. + */ + if (!rt2x00queue_threshold(entry->queue)) + ieee80211_wake_queue(rt2x00dev->hw, qid); } EXPORT_SYMBOL_GPL(rt2x00lib_txdone); -void rt2x00lib_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) +void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry) { - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct rxdone_entry_desc rxdesc; + struct sk_buff *skb; struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status; - unsigned int header_size = ieee80211_get_hdrlen_from_skb(entry->skb); struct ieee80211_supported_band *sband; struct ieee80211_hdr *hdr; const struct rt2x00_rate *rate; + unsigned int header_size; unsigned int align; unsigned int i; int idx = -1; - u16 fc; + + /* + * Allocate a new sk_buffer. If no new buffer available, drop the + * received frame and reuse the existing buffer. + */ + skb = rt2x00queue_alloc_rxskb(rt2x00dev, entry); + if (!skb) + return; + + /* + * Unmap the skb. + */ + rt2x00queue_unmap_skb(rt2x00dev, entry->skb); + + /* + * Extract the RXD details. + */ + memset(&rxdesc, 0, sizeof(rxdesc)); + rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); /* * The data behind the ieee80211 header must be * aligned on a 4 byte boundary. */ + header_size = ieee80211_get_hdrlen_from_skb(entry->skb); align = ((unsigned long)(entry->skb->data + header_size)) & 3; if (align) { skb_push(entry->skb, align); /* Move entire frame in 1 command */ memmove(entry->skb->data, entry->skb->data + align, - rxdesc->size); + rxdesc.size); } /* Update data pointers, trim buffer to correct size */ - skb_trim(entry->skb, rxdesc->size); + skb_trim(entry->skb, rxdesc.size); /* * Update RX statistics. @@ -587,10 +638,10 @@ void rt2x00lib_rxdone(struct queue_entry *entry, for (i = 0; i < sband->n_bitrates; i++) { rate = rt2x00_get_rate(sband->bitrates[i].hw_value); - if (((rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) && - (rate->plcp == rxdesc->signal)) || - (!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) && - (rate->bitrate == rxdesc->signal))) { + if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) && + (rate->plcp == rxdesc.signal)) || + (!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) && + (rate->bitrate == rxdesc.signal))) { idx = i; break; } @@ -598,8 +649,8 @@ void rt2x00lib_rxdone(struct queue_entry *entry, if (idx < 0) { WARNING(rt2x00dev, "Frame received with unrecognized signal," - "signal=0x%.2x, plcp=%d.\n", rxdesc->signal, - !!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP)); + "signal=0x%.2x, plcp=%d.\n", rxdesc.signal, + !!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP)); idx = 0; } @@ -607,17 +658,17 @@ void rt2x00lib_rxdone(struct queue_entry *entry, * Only update link status if this is a beacon frame carrying our bssid. */ hdr = (struct ieee80211_hdr *)entry->skb->data; - fc = le16_to_cpu(hdr->frame_control); - if (is_beacon(fc) && (rxdesc->dev_flags & RXDONE_MY_BSS)) - rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc->rssi); + if (ieee80211_is_beacon(hdr->frame_control) && + (rxdesc.dev_flags & RXDONE_MY_BSS)) + rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi); rt2x00dev->link.qual.rx_success++; rx_status->rate_idx = idx; rx_status->qual = - rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc->rssi); - rx_status->signal = rxdesc->rssi; - rx_status->flag = rxdesc->flags; + rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc.rssi); + rx_status->signal = rxdesc.rssi; + rx_status->flag = rxdesc.flags; rx_status->antenna = rt2x00dev->link.ant.active.rx; /* @@ -626,7 +677,16 @@ void rt2x00lib_rxdone(struct queue_entry *entry, */ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb); ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb, rx_status); - entry->skb = NULL; + + /* + * Replace the skb with the freshly allocated one. + */ + entry->skb = skb; + entry->flags = 0; + + rt2x00dev->ops->lib->init_rxentry(rt2x00dev, entry); + + rt2x00queue_index_inc(entry->queue, Q_INDEX); } EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 558f45bf27e..1d1f0749375 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -98,10 +98,57 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, const int force_config); -/* - * Queue handlers. +/** + * DOC: Queue handlers + */ + +/** + * rt2x00queue_alloc_rxskb - allocate a skb for RX purposes. + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @queue: The queue for which the skb will be applicable. + */ +struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry); + +/** + * rt2x00queue_unmap_skb - Unmap a skb from DMA. + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: The skb to unmap. + */ +void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); + +/** + * rt2x00queue_free_skb - free a skb + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: The skb to free. + */ +void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); + +/** + * rt2x00queue_free_skb - free a skb + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: The skb to free. + */ +void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); + +/** + * rt2x00queue_write_tx_frame - Write TX frame to hardware + * @queue: Queue over which the frame should be send + * @skb: The skb to send */ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb); + +/** + * rt2x00queue_index_inc - Index incrementation function + * @queue: Queue (&struct data_queue) to perform the action on. + * @index: Index type (&enum queue_index) to perform the action on. + * + * This function will increase the requested index on the queue, + * it will grab the appropriate locks and handle queue overflow events by + * resetting the index to the start of the queue. + */ +void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index); + void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev); void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev); int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 8d6ad18d389..adf2876ed8a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -60,12 +60,8 @@ int rt2x00pci_write_tx_data(struct queue_entry *entry) * Fill in skb descriptor */ skbdesc = get_skb_frame_desc(entry->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->desc = entry_priv->desc; skbdesc->desc_len = entry->queue->desc_size; - skbdesc->entry = entry; - - memcpy(entry_priv->data, entry->skb->data, entry->skb->len); return 0; } @@ -80,7 +76,6 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) struct queue_entry *entry; struct queue_entry_priv_pci *entry_priv; struct skb_frame_desc *skbdesc; - struct rxdone_entry_desc rxdesc; u32 word; while (1) { @@ -91,110 +86,27 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) if (rt2x00_get_field32(word, RXD_ENTRY_OWNER_NIC)) break; - memset(&rxdesc, 0, sizeof(rxdesc)); - rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); - /* - * Allocate the sk_buffer and copy all data into it. - */ - entry->skb = rt2x00queue_alloc_rxskb(queue); - if (!entry->skb) - return; - - memcpy(entry->skb->data, entry_priv->data, rxdesc.size); - skb_trim(entry->skb, rxdesc.size); - - /* - * Fill in skb descriptor + * Fill in desc fields of the skb descriptor */ skbdesc = get_skb_frame_desc(entry->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->desc = entry_priv->desc; - skbdesc->desc_len = queue->desc_size; - skbdesc->entry = entry; + skbdesc->desc_len = entry->queue->desc_size; /* * Send the frame to rt2x00lib for further processing. */ - rt2x00lib_rxdone(entry, &rxdesc); - - if (test_bit(DEVICE_ENABLED_RADIO, &queue->rt2x00dev->flags)) { - rt2x00_set_field32(&word, RXD_ENTRY_OWNER_NIC, 1); - rt2x00_desc_write(entry_priv->desc, 0, word); - } - - rt2x00queue_index_inc(queue, Q_INDEX); + rt2x00lib_rxdone(rt2x00dev, entry); } } EXPORT_SYMBOL_GPL(rt2x00pci_rxdone); -void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry, - struct txdone_entry_desc *txdesc) -{ - struct queue_entry_priv_pci *entry_priv = entry->priv_data; - enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); - u32 word; - - rt2x00lib_txdone(entry, txdesc); - - /* - * Make this entry available for reuse. - */ - entry->flags = 0; - - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, TXD_ENTRY_OWNER_NIC, 0); - rt2x00_set_field32(&word, TXD_ENTRY_VALID, 0); - rt2x00_desc_write(entry_priv->desc, 0, word); - - __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); - - /* - * If the data queue was below the threshold before the txdone - * handler we must make sure the packet queue in the mac80211 stack - * is reenabled when the txdone handler has finished. - */ - if (!rt2x00queue_threshold(entry->queue)) - ieee80211_wake_queue(rt2x00dev->hw, qid); - -} -EXPORT_SYMBOL_GPL(rt2x00pci_txdone); - /* * Device initialization handlers. */ -#define desc_size(__queue) \ -({ \ - ((__queue)->limit * (__queue)->desc_size);\ -}) - -#define data_size(__queue) \ -({ \ - ((__queue)->limit * (__queue)->data_size);\ -}) - -#define dma_size(__queue) \ -({ \ - data_size(__queue) + desc_size(__queue);\ -}) - -#define desc_offset(__queue, __base, __i) \ -({ \ - (__base) + data_size(__queue) + \ - ((__i) * (__queue)->desc_size); \ -}) - -#define data_offset(__queue, __base, __i) \ -({ \ - (__base) + \ - ((__i) * (__queue)->data_size); \ -}) - static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, struct data_queue *queue) { - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); struct queue_entry_priv_pci *entry_priv; void *addr; dma_addr_t dma; @@ -203,21 +115,21 @@ static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, /* * Allocate DMA memory for descriptor and buffer. */ - addr = pci_alloc_consistent(pci_dev, dma_size(queue), &dma); + addr = dma_alloc_coherent(rt2x00dev->dev, + queue->limit * queue->desc_size, + &dma, GFP_KERNEL | GFP_DMA); if (!addr) return -ENOMEM; - memset(addr, 0, dma_size(queue)); + memset(addr, 0, queue->limit * queue->desc_size); /* * Initialize all queue entries to contain valid addresses. */ for (i = 0; i < queue->limit; i++) { entry_priv = queue->entries[i].priv_data; - entry_priv->desc = desc_offset(queue, addr, i); - entry_priv->desc_dma = desc_offset(queue, dma, i); - entry_priv->data = data_offset(queue, addr, i); - entry_priv->data_dma = data_offset(queue, dma, i); + entry_priv->desc = addr + i * queue->desc_size; + entry_priv->desc_dma = dma + i * queue->desc_size; } return 0; @@ -226,19 +138,19 @@ static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev, struct data_queue *queue) { - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); struct queue_entry_priv_pci *entry_priv = queue->entries[0].priv_data; - if (entry_priv->data) - pci_free_consistent(pci_dev, dma_size(queue), - entry_priv->data, entry_priv->data_dma); - entry_priv->data = NULL; + if (entry_priv->desc) + dma_free_coherent(rt2x00dev->dev, + queue->limit * queue->desc_size, + entry_priv->desc, entry_priv->desc_dma); + entry_priv->desc = NULL; } int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev) { - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); + struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev); struct data_queue *queue; int status; @@ -279,7 +191,7 @@ void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev) /* * Free irq line. */ - free_irq(rt2x00dev_pci(rt2x00dev)->irq, rt2x00dev); + free_irq(to_pci_dev(rt2x00dev->dev)->irq, rt2x00dev); /* * Free DMA @@ -308,7 +220,7 @@ static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev) static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev) { - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); + struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev); rt2x00dev->csr.base = ioremap(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0)); @@ -357,7 +269,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) if (pci_set_mwi(pci_dev)) ERROR_PROBE("MWI not available.\n"); - if (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { + if (dma_set_mask(&pci_dev->dev, DMA_32BIT_MASK)) { ERROR_PROBE("PCI DMA not supported.\n"); retval = -EIO; goto exit_disable_device; @@ -373,7 +285,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) pci_set_drvdata(pci_dev, hw); rt2x00dev = hw->priv; - rt2x00dev->dev = pci_dev; + rt2x00dev->dev = &pci_dev->dev; rt2x00dev->ops = ops; rt2x00dev->hw = hw; diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index 87c4a0cd78d..50c6df4f81d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -107,9 +107,6 @@ int rt2x00pci_write_tx_data(struct queue_entry *entry); struct queue_entry_priv_pci { __le32 *desc; dma_addr_t desc_dma; - - void *data; - dma_addr_t data_dma; }; /** @@ -118,15 +115,6 @@ struct queue_entry_priv_pci { */ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev); -/** - * rt2x00pci_txdone - Handle TX done events - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @entry: Entry which has completed the transmission of a frame. - * @desc: TX done descriptor - */ -void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry, - struct txdone_entry_desc *desc); - /* * Device initialization handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 7b52039b01a..8e86611791f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -25,34 +25,30 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/dma-mapping.h> #include "rt2x00.h" #include "rt2x00lib.h" -struct sk_buff *rt2x00queue_alloc_rxskb(struct data_queue *queue) +struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry) { - struct sk_buff *skb; unsigned int frame_size; unsigned int reserved_size; + struct sk_buff *skb; + struct skb_frame_desc *skbdesc; /* * The frame size includes descriptor size, because the * hardware directly receive the frame into the skbuffer. */ - frame_size = queue->data_size + queue->desc_size; + frame_size = entry->queue->data_size + entry->queue->desc_size; /* - * For the allocation we should keep a few things in mind: - * 1) 4byte alignment of 802.11 payload - * - * For (1) we need at most 4 bytes to guarentee the correct - * alignment. We are going to optimize the fact that the chance - * that the 802.11 header_size % 4 == 2 is much bigger then - * anything else. However since we need to move the frame up - * to 3 bytes to the front, which means we need to preallocate - * 6 bytes. + * Reserve a few bytes extra headroom to allow drivers some moving + * space (e.g. for alignment), while keeping the skb aligned. */ - reserved_size = 6; + reserved_size = 8; /* * Allocate skbuffer. @@ -64,9 +60,56 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct data_queue *queue) skb_reserve(skb, reserved_size); skb_put(skb, frame_size); + /* + * Populate skbdesc. + */ + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->entry = entry; + + if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) { + skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, + skb->data, + skb->len, + DMA_FROM_DEVICE); + skbdesc->flags |= SKBDESC_DMA_MAPPED_RX; + } + return skb; } -EXPORT_SYMBOL_GPL(rt2x00queue_alloc_rxskb); + +void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + + skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, + DMA_TO_DEVICE); + skbdesc->flags |= SKBDESC_DMA_MAPPED_TX; +} +EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb); + +void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + + if (skbdesc->flags & SKBDESC_DMA_MAPPED_RX) { + dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, + DMA_FROM_DEVICE); + skbdesc->flags &= ~SKBDESC_DMA_MAPPED_RX; + } + + if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) { + dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, + DMA_TO_DEVICE); + skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX; + } +} + +void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) +{ + rt2x00queue_unmap_skb(rt2x00dev, skb); + dev_kfree_skb_any(skb); +} void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, struct txentry_desc *txdesc) @@ -80,7 +123,6 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, unsigned int data_length; unsigned int duration; unsigned int residual; - u16 frame_control; memset(txdesc, 0, sizeof(*txdesc)); @@ -96,11 +138,6 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, data_length = entry->skb->len + 4; /* - * Read required fields from ieee80211 header. - */ - frame_control = le16_to_cpu(hdr->frame_control); - - /* * Check whether this frame is to be acked. */ if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) @@ -109,9 +146,10 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, /* * Check if this is a RTS/CTS frame */ - if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) { + if (ieee80211_is_rts(hdr->frame_control) || + ieee80211_is_cts(hdr->frame_control)) { __set_bit(ENTRY_TXD_BURST, &txdesc->flags); - if (is_rts_frame(frame_control)) + if (ieee80211_is_rts(hdr->frame_control)) __set_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags); else __set_bit(ENTRY_TXD_CTS_FRAME, &txdesc->flags); @@ -139,7 +177,8 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, * Beacons and probe responses require the tsf timestamp * to be inserted into the frame. */ - if (txdesc->queue == QID_BEACON || is_probe_resp(frame_control)) + if (ieee80211_is_beacon(hdr->frame_control) || + ieee80211_is_probe_resp(hdr->frame_control)) __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags); /* @@ -236,6 +275,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) { struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); struct txentry_desc txdesc; + struct skb_frame_desc *skbdesc; if (unlikely(rt2x00queue_full(queue))) return -EINVAL; @@ -256,11 +296,21 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) entry->skb = skb; rt2x00queue_create_tx_descriptor(entry, &txdesc); + /* + * skb->cb array is now ours and we are free to use it. + */ + skbdesc = get_skb_frame_desc(entry->skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->entry = entry; + if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) { __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); return -EIO; } + if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags)) + rt2x00queue_map_txskb(queue->rt2x00dev, skb); + __set_bit(ENTRY_DATA_PENDING, &entry->flags); rt2x00queue_index_inc(queue, Q_INDEX); @@ -336,7 +386,6 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index) spin_unlock_irqrestore(&queue->lock, irqflags); } -EXPORT_SYMBOL_GPL(rt2x00queue_index_inc); static void rt2x00queue_reset(struct data_queue *queue) { @@ -426,12 +475,41 @@ static int rt2x00queue_alloc_entries(struct data_queue *queue, return 0; } +static void rt2x00queue_free_skbs(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue) +{ + unsigned int i; + + if (!queue->entries) + return; + + for (i = 0; i < queue->limit; i++) { + if (queue->entries[i].skb) + rt2x00queue_free_skb(rt2x00dev, queue->entries[i].skb); + } +} + +static int rt2x00queue_alloc_rxskbs(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue) +{ + unsigned int i; + struct sk_buff *skb; + + for (i = 0; i < queue->limit; i++) { + skb = rt2x00queue_alloc_rxskb(rt2x00dev, &queue->entries[i]); + if (!skb) + return -ENOMEM; + queue->entries[i].skb = skb; + } + + return 0; +} + int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; int status; - status = rt2x00queue_alloc_entries(rt2x00dev->rx, rt2x00dev->ops->rx); if (status) goto exit; @@ -446,11 +524,14 @@ int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) if (status) goto exit; - if (!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) - return 0; + if (test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) { + status = rt2x00queue_alloc_entries(&rt2x00dev->bcn[1], + rt2x00dev->ops->atim); + if (status) + goto exit; + } - status = rt2x00queue_alloc_entries(&rt2x00dev->bcn[1], - rt2x00dev->ops->atim); + status = rt2x00queue_alloc_rxskbs(rt2x00dev, rt2x00dev->rx); if (status) goto exit; @@ -468,6 +549,8 @@ void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; + rt2x00queue_free_skbs(rt2x00dev, rt2x00dev->rx); + queue_for_each(rt2x00dev, queue) { kfree(queue->entries); queue->entries = NULL; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index fcf52520b01..5dd9cca3c62 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -42,15 +42,18 @@ /** * DOC: Number of entries per queue * - * After research it was concluded that 12 entries in a RX and TX - * queue would be sufficient. Although this is almost one third of - * the amount the legacy driver allocated, the queues aren't getting - * filled to the maximum even when working with the maximum rate. + * Under normal load without fragmentation 12 entries are sufficient + * without the queue being filled up to the maximum. When using fragmentation + * and the queue threshold code we need to add some additional margins to + * make sure the queue will never (or only under extreme load) fill up + * completely. + * Since we don't use preallocated DMA having a large number of queue entries + * will have only minimal impact on the memory requirements for the queue. */ -#define RX_ENTRIES 12 -#define TX_ENTRIES 12 +#define RX_ENTRIES 24 +#define TX_ENTRIES 24 #define BEACON_ENTRIES 1 -#define ATIM_ENTRIES 1 +#define ATIM_ENTRIES 8 /** * enum data_queue_qid: Queue identification @@ -82,10 +85,13 @@ enum data_queue_qid { /** * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc * + * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX + * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX */ -//enum skb_frame_desc_flags { -// TEMPORARILY EMPTY -//}; +enum skb_frame_desc_flags { + SKBDESC_DMA_MAPPED_RX = (1 << 0), + SKBDESC_DMA_MAPPED_TX = (1 << 1), +}; /** * struct skb_frame_desc: Descriptor information for the skb buffer @@ -94,19 +100,20 @@ enum data_queue_qid { * this structure should not exceed the size of that array (40 bytes). * * @flags: Frame flags, see &enum skb_frame_desc_flags. - * @data: Pointer to data part of frame (Start of ieee80211 header). + * @desc_len: Length of the frame descriptor. * @desc: Pointer to descriptor part of the frame. * Note that this pointer could point to something outside * of the scope of the skb->data pointer. - * @data_len: Length of the frame data. - * @desc_len: Length of the frame descriptor. + * @skb_dma: (PCI-only) the DMA address associated with the sk buffer. * @entry: The entry to which this sk buffer belongs. */ struct skb_frame_desc { unsigned int flags; - void *desc; unsigned int desc_len; + void *desc; + + dma_addr_t skb_dma; struct queue_entry *entry; }; diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c index fcef9885ab5..207281cfa8b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -45,14 +45,17 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state) if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) return 0; - if (state == RFKILL_STATE_ON) { + if (state == RFKILL_STATE_UNBLOCKED) { INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n"); __clear_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); retval = rt2x00lib_enable_radio(rt2x00dev); - } else if (state == RFKILL_STATE_OFF) { + } else if (state == RFKILL_STATE_SOFT_BLOCKED) { INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n"); __set_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); rt2x00lib_disable_radio(rt2x00dev); + } else { + WARNING(rt2x00dev, "Received unexpected rfkill state %d.\n", + state); } return retval; diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 3080969ae5b..83862e7f7ae 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -40,7 +40,7 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, void *buffer, const u16 buffer_length, const int timeout) { - struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); int status; unsigned int i; unsigned int pipe = @@ -130,10 +130,9 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) struct queue_entry *entry = (struct queue_entry *)urb->context; struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct txdone_entry_desc txdesc; - enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - !__test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; /* @@ -157,26 +156,12 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) txdesc.retry = 0; rt2x00lib_txdone(entry, &txdesc); - - /* - * Make this entry available for reuse. - */ - entry->flags = 0; - rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); - - /* - * If the data queue was below the threshold before the txdone - * handler we must make sure the packet queue in the mac80211 stack - * is reenabled when the txdone handler has finished. - */ - if (!rt2x00queue_threshold(entry->queue)) - ieee80211_wake_queue(rt2x00dev->hw, qid); } int rt2x00usb_write_tx_data(struct queue_entry *entry) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); struct queue_entry_priv_usb *entry_priv = entry->priv_data; struct skb_frame_desc *skbdesc; u32 length; @@ -191,10 +176,8 @@ int rt2x00usb_write_tx_data(struct queue_entry *entry) * Fill in skb descriptor */ skbdesc = get_skb_frame_desc(entry->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->desc = entry->skb->data; skbdesc->desc_len = entry->queue->desc_size; - skbdesc->entry = entry; /* * USB devices cannot blindly pass the skb->len as the @@ -264,13 +247,11 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) { struct queue_entry *entry = (struct queue_entry *)urb->context; struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct sk_buff *skb; - struct skb_frame_desc *skbdesc; - struct rxdone_entry_desc rxdesc; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u8 rxd[32]; if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - !test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; /* @@ -278,50 +259,22 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) * to be actually valid, or if the urb is signaling * a problem. */ - if (urb->actual_length < entry->queue->desc_size || urb->status) - goto skip_entry; + if (urb->actual_length < entry->queue->desc_size || urb->status) { + __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + usb_submit_urb(urb, GFP_ATOMIC); + return; + } /* - * Fill in skb descriptor + * Fill in desc fields of the skb descriptor */ - skbdesc = get_skb_frame_desc(entry->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->entry = entry; skbdesc->desc = rxd; skbdesc->desc_len = entry->queue->desc_size; - memset(&rxdesc, 0, sizeof(rxdesc)); - rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); - - /* - * Allocate a new sk buffer to replace the current one. - * If allocation fails, we should drop the current frame - * so we can recycle the existing sk buffer for the new frame. - */ - skb = rt2x00queue_alloc_rxskb(entry->queue); - if (!skb) - goto skip_entry; - /* * Send the frame to rt2x00lib for further processing. */ - rt2x00lib_rxdone(entry, &rxdesc); - - /* - * Replace current entry's skb with the newly allocated one, - * and reinitialize the urb. - */ - entry->skb = skb; - urb->transfer_buffer = entry->skb->data; - urb->transfer_buffer_length = entry->skb->len; - -skip_entry: - if (test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) { - __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - usb_submit_urb(urb, GFP_ATOMIC); - } - - rt2x00queue_index_inc(entry->queue, Q_INDEX); + rt2x00lib_rxdone(rt2x00dev, entry); } /* @@ -331,6 +284,7 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) { struct queue_entry_priv_usb *entry_priv; struct queue_entry_priv_usb_bcn *bcn_priv; + struct data_queue *queue; unsigned int i; rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0, @@ -339,9 +293,11 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) /* * Cancel all queues. */ - for (i = 0; i < rt2x00dev->rx->limit; i++) { - entry_priv = rt2x00dev->rx->entries[i].priv_data; - usb_kill_urb(entry_priv->urb); + queue_for_each(rt2x00dev, queue) { + for (i = 0; i < queue->limit; i++) { + entry_priv = queue->entries[i].priv_data; + usb_kill_urb(entry_priv->urb); + } } /* @@ -364,7 +320,7 @@ EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); struct queue_entry_priv_usb *entry_priv = entry->priv_data; usb_fill_bulk_urb(entry_priv->urb, usb_dev, @@ -431,8 +387,6 @@ static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, entry_priv = queue->entries[i].priv_data; usb_kill_urb(entry_priv->urb); usb_free_urb(entry_priv->urb); - if (queue->entries[i].skb) - kfree_skb(queue->entries[i].skb); } /* @@ -454,10 +408,7 @@ static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; - struct sk_buff *skb; - unsigned int entry_size; - unsigned int i; - int uninitialized_var(status); + int status; /* * Allocate DMA @@ -468,18 +419,6 @@ int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) goto exit; } - /* - * For the RX queue, skb's should be allocated. - */ - entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size; - for (i = 0; i < rt2x00dev->rx->limit; i++) { - skb = rt2x00queue_alloc_rxskb(rt2x00dev->rx); - if (!skb) - goto exit; - - rt2x00dev->rx->entries[i].skb = skb; - } - return 0; exit: @@ -558,7 +497,7 @@ int rt2x00usb_probe(struct usb_interface *usb_intf, usb_set_intfdata(usb_intf, hw); rt2x00dev = hw->priv; - rt2x00dev->dev = usb_intf; + rt2x00dev->dev = &usb_intf->dev; rt2x00dev->ops = ops; rt2x00dev->hw = hw; mutex_init(&rt2x00dev->usb_cache_mutex); diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index b1187c812e7..aad794adf52 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -26,6 +26,12 @@ #ifndef RT2X00USB_H #define RT2X00USB_H +#define to_usb_device_intf(d) \ +({ \ + struct usb_interface *intf = to_usb_interface(d); \ + interface_to_usbdev(intf); \ +}) + /* * This variable should be used with the * usb_driver structure initialization. diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 5b7267ece1b..bbf1048f640 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1030,11 +1030,12 @@ static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; rt2x00_desc_read(entry_priv->desc, 5, &word); rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, - entry_priv->data_dma); + skbdesc->skb_dma); rt2x00_desc_write(entry_priv->desc, 5, word); rt2x00_desc_read(entry_priv->desc, 0, &word); @@ -1522,7 +1523,6 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data; __le32 *txd = skbdesc->desc; u32 word; @@ -1557,7 +1557,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_desc_read(txd, 6, &word); rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, - entry_priv->data_dma); + skbdesc->skb_dma); rt2x00_desc_write(txd, 6, word); if (skbdesc->desc_len > TXINFO_SIZE) { @@ -1767,7 +1767,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) __set_bit(TXDONE_UNKNOWN, &txdesc.flags); txdesc.retry = 0; - rt2x00pci_txdone(rt2x00dev, entry_done, &txdesc); + rt2x00lib_txdone(entry_done, &txdesc); entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); } @@ -1787,7 +1787,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) } txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, &txdesc); + rt2x00lib_txdone(entry, &txdesc); } } @@ -1973,7 +1973,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * To determine the RT chip we have to read the * PCI header of the device. */ - pci_read_config_word(rt2x00dev_pci(rt2x00dev), + pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_CONFIG_HEADER_DEVICE, &device); value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); @@ -2239,7 +2239,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = 0; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); @@ -2302,9 +2302,10 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt61pci_probe_hw_mode(rt2x00dev); /* - * This device requires firmware. + * This device requires firmware and DMA mapped skbs. */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); /* * Set the rssi offset. @@ -2402,6 +2403,12 @@ static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) skb->data, skb->len); rt61pci_kick_tx_queue(rt2x00dev, QID_BEACON); + /* + * Clean up beacon skb. + */ + dev_kfree_skb_any(skb); + intf->beacon->skb = NULL; + return 0; } diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 675ff7900ee..3ef318e098e 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1827,7 +1827,7 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); @@ -2007,6 +2007,12 @@ static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) REGISTER_TIMEOUT32(skb->len)); rt73usb_kick_tx_queue(rt2x00dev, QID_BEACON); + /* + * Clean up the beacon skb. + */ + dev_kfree_skb(skb); + intf->beacon->skb = NULL; + return 0; } diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c deleted file mode 100644 index 883af891ebf..00000000000 --- a/drivers/net/wireless/strip.c +++ /dev/null @@ -1,2804 +0,0 @@ -/* - * Copyright 1996 The Board of Trustees of The Leland Stanford - * Junior University. All Rights Reserved. - * - * Permission to use, copy, modify, and distribute this - * software and its documentation for any purpose and without - * fee is hereby granted, provided that the above copyright - * notice appear in all copies. Stanford University - * makes no representations about the suitability of this - * software for any purpose. It is provided "as is" without - * express or implied warranty. - * - * strip.c This module implements Starmode Radio IP (STRIP) - * for kernel-based devices like TTY. It interfaces between a - * raw TTY, and the kernel's INET protocol layers (via DDI). - * - * Version: @(#)strip.c 1.3 July 1997 - * - * Author: Stuart Cheshire <cheshire@cs.stanford.edu> - * - * Fixes: v0.9 12th Feb 1996 (SC) - * New byte stuffing (2+6 run-length encoding) - * New watchdog timer task - * New Protocol key (SIP0) - * - * v0.9.1 3rd March 1996 (SC) - * Changed to dynamic device allocation -- no more compile - * time (or boot time) limit on the number of STRIP devices. - * - * v0.9.2 13th March 1996 (SC) - * Uses arp cache lookups (but doesn't send arp packets yet) - * - * v0.9.3 17th April 1996 (SC) - * Fixed bug where STR_ERROR flag was getting set unneccessarily - * (causing otherwise good packets to be unneccessarily dropped) - * - * v0.9.4 27th April 1996 (SC) - * First attempt at using "&COMMAND" Starmode AT commands - * - * v0.9.5 29th May 1996 (SC) - * First attempt at sending (unicast) ARP packets - * - * v0.9.6 5th June 1996 (Elliot) - * Put "message level" tags in every "printk" statement - * - * v0.9.7 13th June 1996 (laik) - * Added support for the /proc fs - * - * v0.9.8 July 1996 (Mema) - * Added packet logging - * - * v1.0 November 1996 (SC) - * Fixed (severe) memory leaks in the /proc fs code - * Fixed race conditions in the logging code - * - * v1.1 January 1997 (SC) - * Deleted packet logging (use tcpdump instead) - * Added support for Metricom Firmware v204 features - * (like message checksums) - * - * v1.2 January 1997 (SC) - * Put portables list back in - * - * v1.3 July 1997 (SC) - * Made STRIP driver set the radio's baud rate automatically. - * It is no longer necessarily to manually set the radio's - * rate permanently to 115200 -- the driver handles setting - * the rate automatically. - */ - -#ifdef MODULE -static const char StripVersion[] = "1.3A-STUART.CHESHIRE-MODULAR"; -#else -static const char StripVersion[] = "1.3A-STUART.CHESHIRE"; -#endif - -#define TICKLE_TIMERS 0 -#define EXT_COUNTERS 1 - - -/************************************************************************/ -/* Header files */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/bitops.h> -#include <asm/system.h> -#include <asm/uaccess.h> - -# include <linux/ctype.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/in.h> -#include <linux/tty.h> -#include <linux/errno.h> -#include <linux/netdevice.h> -#include <linux/inetdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/if_strip.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/serial.h> -#include <linux/serialP.h> -#include <linux/rcupdate.h> -#include <net/arp.h> -#include <net/net_namespace.h> - -#include <linux/ip.h> -#include <linux/tcp.h> -#include <linux/time.h> -#include <linux/jiffies.h> - -/************************************************************************/ -/* Useful structures and definitions */ - -/* - * A MetricomKey identifies the protocol being carried inside a Metricom - * Starmode packet. - */ - -typedef union { - __u8 c[4]; - __u32 l; -} MetricomKey; - -/* - * An IP address can be viewed as four bytes in memory (which is what it is) or as - * a single 32-bit long (which is convenient for assignment, equality testing etc.) - */ - -typedef union { - __u8 b[4]; - __u32 l; -} IPaddr; - -/* - * A MetricomAddressString is used to hold a printable representation of - * a Metricom address. - */ - -typedef struct { - __u8 c[24]; -} MetricomAddressString; - -/* Encapsulation can expand packet of size x to 65/64x + 1 - * Sent packet looks like "<CR>*<address>*<key><encaps payload><CR>" - * 1 1 1-18 1 4 ? 1 - * eg. <CR>*0000-1234*SIP0<encaps payload><CR> - * We allow 31 bytes for the stars, the key, the address and the <CR>s - */ -#define STRIP_ENCAP_SIZE(X) (32 + (X)*65L/64L) - -/* - * A STRIP_Header is never really sent over the radio, but making a dummy - * header for internal use within the kernel that looks like an Ethernet - * header makes certain other software happier. For example, tcpdump - * already understands Ethernet headers. - */ - -typedef struct { - MetricomAddress dst_addr; /* Destination address, e.g. "0000-1234" */ - MetricomAddress src_addr; /* Source address, e.g. "0000-5678" */ - unsigned short protocol; /* The protocol type, using Ethernet codes */ -} STRIP_Header; - -typedef struct { - char c[60]; -} MetricomNode; - -#define NODE_TABLE_SIZE 32 -typedef struct { - struct timeval timestamp; - int num_nodes; - MetricomNode node[NODE_TABLE_SIZE]; -} MetricomNodeTable; - -enum { FALSE = 0, TRUE = 1 }; - -/* - * Holds the radio's firmware version. - */ -typedef struct { - char c[50]; -} FirmwareVersion; - -/* - * Holds the radio's serial number. - */ -typedef struct { - char c[18]; -} SerialNumber; - -/* - * Holds the radio's battery voltage. - */ -typedef struct { - char c[11]; -} BatteryVoltage; - -typedef struct { - char c[8]; -} char8; - -enum { - NoStructure = 0, /* Really old firmware */ - StructuredMessages = 1, /* Parsable AT response msgs */ - ChecksummedMessages = 2 /* Parsable AT response msgs with checksums */ -}; - -struct strip { - int magic; - /* - * These are pointers to the malloc()ed frame buffers. - */ - - unsigned char *rx_buff; /* buffer for received IP packet */ - unsigned char *sx_buff; /* buffer for received serial data */ - int sx_count; /* received serial data counter */ - int sx_size; /* Serial buffer size */ - unsigned char *tx_buff; /* transmitter buffer */ - unsigned char *tx_head; /* pointer to next byte to XMIT */ - int tx_left; /* bytes left in XMIT queue */ - int tx_size; /* Serial buffer size */ - - /* - * STRIP interface statistics. - */ - - unsigned long rx_packets; /* inbound frames counter */ - unsigned long tx_packets; /* outbound frames counter */ - unsigned long rx_errors; /* Parity, etc. errors */ - unsigned long tx_errors; /* Planned stuff */ - unsigned long rx_dropped; /* No memory for skb */ - unsigned long tx_dropped; /* When MTU change */ - unsigned long rx_over_errors; /* Frame bigger then STRIP buf. */ - - unsigned long pps_timer; /* Timer to determine pps */ - unsigned long rx_pps_count; /* Counter to determine pps */ - unsigned long tx_pps_count; /* Counter to determine pps */ - unsigned long sx_pps_count; /* Counter to determine pps */ - unsigned long rx_average_pps; /* rx packets per second * 8 */ - unsigned long tx_average_pps; /* tx packets per second * 8 */ - unsigned long sx_average_pps; /* sent packets per second * 8 */ - -#ifdef EXT_COUNTERS - unsigned long rx_bytes; /* total received bytes */ - unsigned long tx_bytes; /* total received bytes */ - unsigned long rx_rbytes; /* bytes thru radio i/f */ - unsigned long tx_rbytes; /* bytes thru radio i/f */ - unsigned long rx_sbytes; /* tot bytes thru serial i/f */ - unsigned long tx_sbytes; /* tot bytes thru serial i/f */ - unsigned long rx_ebytes; /* tot stat/err bytes */ - unsigned long tx_ebytes; /* tot stat/err bytes */ -#endif - - /* - * Internal variables. - */ - - struct list_head list; /* Linked list of devices */ - - int discard; /* Set if serial error */ - int working; /* Is radio working correctly? */ - int firmware_level; /* Message structuring level */ - int next_command; /* Next periodic command */ - unsigned int user_baud; /* The user-selected baud rate */ - int mtu; /* Our mtu (to spot changes!) */ - long watchdog_doprobe; /* Next time to test the radio */ - long watchdog_doreset; /* Time to do next reset */ - long gratuitous_arp; /* Time to send next ARP refresh */ - long arp_interval; /* Next ARP interval */ - struct timer_list idle_timer; /* For periodic wakeup calls */ - MetricomAddress true_dev_addr; /* True address of radio */ - int manual_dev_addr; /* Hack: See note below */ - - FirmwareVersion firmware_version; /* The radio's firmware version */ - SerialNumber serial_number; /* The radio's serial number */ - BatteryVoltage battery_voltage; /* The radio's battery voltage */ - - /* - * Other useful structures. - */ - - struct tty_struct *tty; /* ptr to TTY structure */ - struct net_device *dev; /* Our device structure */ - - /* - * Neighbour radio records - */ - - MetricomNodeTable portables; - MetricomNodeTable poletops; -}; - -/* - * Note: manual_dev_addr hack - * - * It is not possible to change the hardware address of a Metricom radio, - * or to send packets with a user-specified hardware source address, thus - * trying to manually set a hardware source address is a questionable - * thing to do. However, if the user *does* manually set the hardware - * source address of a STRIP interface, then the kernel will believe it, - * and use it in certain places. For example, the hardware address listed - * by ifconfig will be the manual address, not the true one. - * (Both addresses are listed in /proc/net/strip.) - * Also, ARP packets will be sent out giving the user-specified address as - * the source address, not the real address. This is dangerous, because - * it means you won't receive any replies -- the ARP replies will go to - * the specified address, which will be some other radio. The case where - * this is useful is when that other radio is also connected to the same - * machine. This allows you to connect a pair of radios to one machine, - * and to use one exclusively for inbound traffic, and the other - * exclusively for outbound traffic. Pretty neat, huh? - * - * Here's the full procedure to set this up: - * - * 1. "slattach" two interfaces, e.g. st0 for outgoing packets, - * and st1 for incoming packets - * - * 2. "ifconfig" st0 (outbound radio) to have the hardware address - * which is the real hardware address of st1 (inbound radio). - * Now when it sends out packets, it will masquerade as st1, and - * replies will be sent to that radio, which is exactly what we want. - * - * 3. Set the route table entry ("route add default ..." or - * "route add -net ...", as appropriate) to send packets via the st0 - * interface (outbound radio). Do not add any route which sends packets - * out via the st1 interface -- that radio is for inbound traffic only. - * - * 4. "ifconfig" st1 (inbound radio) to have hardware address zero. - * This tells the STRIP driver to "shut down" that interface and not - * send any packets through it. In particular, it stops sending the - * periodic gratuitous ARP packets that a STRIP interface normally sends. - * Also, when packets arrive on that interface, it will search the - * interface list to see if there is another interface who's manual - * hardware address matches its own real address (i.e. st0 in this - * example) and if so it will transfer ownership of the skbuff to - * that interface, so that it looks to the kernel as if the packet - * arrived on that interface. This is necessary because when the - * kernel sends an ARP packet on st0, it expects to get a reply on - * st0, and if it sees the reply come from st1 then it will ignore - * it (to be accurate, it puts the entry in the ARP table, but - * labelled in such a way that st0 can't use it). - * - * Thanks to Petros Maniatis for coming up with the idea of splitting - * inbound and outbound traffic between two interfaces, which turned - * out to be really easy to implement, even if it is a bit of a hack. - * - * Having set a manual address on an interface, you can restore it - * to automatic operation (where the address is automatically kept - * consistent with the real address of the radio) by setting a manual - * address of all ones, e.g. "ifconfig st0 hw strip FFFFFFFFFFFF" - * This 'turns off' manual override mode for the device address. - * - * Note: The IEEE 802 headers reported in tcpdump will show the *real* - * radio addresses the packets were sent and received from, so that you - * can see what is really going on with packets, and which interfaces - * they are really going through. - */ - - -/************************************************************************/ -/* Constants */ - -/* - * CommandString1 works on all radios - * Other CommandStrings are only used with firmware that provides structured responses. - * - * ats319=1 Enables Info message for node additions and deletions - * ats319=2 Enables Info message for a new best node - * ats319=4 Enables checksums - * ats319=8 Enables ACK messages - */ - -static const int MaxCommandStringLength = 32; -static const int CompatibilityCommand = 1; - -static const char CommandString0[] = "*&COMMAND*ATS319=7"; /* Turn on checksums & info messages */ -static const char CommandString1[] = "*&COMMAND*ATS305?"; /* Query radio name */ -static const char CommandString2[] = "*&COMMAND*ATS325?"; /* Query battery voltage */ -static const char CommandString3[] = "*&COMMAND*ATS300?"; /* Query version information */ -static const char CommandString4[] = "*&COMMAND*ATS311?"; /* Query poletop list */ -static const char CommandString5[] = "*&COMMAND*AT~LA"; /* Query portables list */ -typedef struct { - const char *string; - long length; -} StringDescriptor; - -static const StringDescriptor CommandString[] = { - {CommandString0, sizeof(CommandString0) - 1}, - {CommandString1, sizeof(CommandString1) - 1}, - {CommandString2, sizeof(CommandString2) - 1}, - {CommandString3, sizeof(CommandString3) - 1}, - {CommandString4, sizeof(CommandString4) - 1}, - {CommandString5, sizeof(CommandString5) - 1} -}; - -#define GOT_ALL_RADIO_INFO(S) \ - ((S)->firmware_version.c[0] && \ - (S)->battery_voltage.c[0] && \ - memcmp(&(S)->true_dev_addr, zero_address.c, sizeof(zero_address))) - -static const char hextable[16] = "0123456789ABCDEF"; - -static const MetricomAddress zero_address; -static const MetricomAddress broadcast_address = - { {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} }; - -static const MetricomKey SIP0Key = { "SIP0" }; -static const MetricomKey ARP0Key = { "ARP0" }; -static const MetricomKey ATR_Key = { "ATR " }; -static const MetricomKey ACK_Key = { "ACK_" }; -static const MetricomKey INF_Key = { "INF_" }; -static const MetricomKey ERR_Key = { "ERR_" }; - -static const long MaxARPInterval = 60 * HZ; /* One minute */ - -/* - * Maximum Starmode packet length is 1183 bytes. Allowing 4 bytes for - * protocol key, 4 bytes for checksum, one byte for CR, and 65/64 expansion - * for STRIP encoding, that translates to a maximum payload MTU of 1155. - * Note: A standard NFS 1K data packet is a total of 0x480 (1152) bytes - * long, including IP header, UDP header, and NFS header. Setting the STRIP - * MTU to 1152 allows us to send default sized NFS packets without fragmentation. - */ -static const unsigned short MAX_SEND_MTU = 1152; -static const unsigned short MAX_RECV_MTU = 1500; /* Hoping for Ethernet sized packets in the future! */ -static const unsigned short DEFAULT_STRIP_MTU = 1152; -static const int STRIP_MAGIC = 0x5303; -static const long LongTime = 0x7FFFFFFF; - -/************************************************************************/ -/* Global variables */ - -static LIST_HEAD(strip_list); -static DEFINE_SPINLOCK(strip_lock); - -/************************************************************************/ -/* Macros */ - -/* Returns TRUE if text T begins with prefix P */ -#define has_prefix(T,L,P) (((L) >= sizeof(P)-1) && !strncmp((T), (P), sizeof(P)-1)) - -/* Returns TRUE if text T of length L is equal to string S */ -#define text_equal(T,L,S) (((L) == sizeof(S)-1) && !strncmp((T), (S), sizeof(S)-1)) - -#define READHEX(X) ((X)>='0' && (X)<='9' ? (X)-'0' : \ - (X)>='a' && (X)<='f' ? (X)-'a'+10 : \ - (X)>='A' && (X)<='F' ? (X)-'A'+10 : 0 ) - -#define READHEX16(X) ((__u16)(READHEX(X))) - -#define READDEC(X) ((X)>='0' && (X)<='9' ? (X)-'0' : 0) - -#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)])) - -#define JIFFIE_TO_SEC(X) ((X) / HZ) - - -/************************************************************************/ -/* Utility routines */ - -static int arp_query(unsigned char *haddr, u32 paddr, - struct net_device *dev) -{ - struct neighbour *neighbor_entry; - int ret = 0; - - neighbor_entry = neigh_lookup(&arp_tbl, &paddr, dev); - - if (neighbor_entry != NULL) { - neighbor_entry->used = jiffies; - if (neighbor_entry->nud_state & NUD_VALID) { - memcpy(haddr, neighbor_entry->ha, dev->addr_len); - ret = 1; - } - neigh_release(neighbor_entry); - } - return ret; -} - -static void DumpData(char *msg, struct strip *strip_info, __u8 * ptr, - __u8 * end) -{ - static const int MAX_DumpData = 80; - __u8 pkt_text[MAX_DumpData], *p = pkt_text; - - *p++ = '\"'; - - while (ptr < end && p < &pkt_text[MAX_DumpData - 4]) { - if (*ptr == '\\') { - *p++ = '\\'; - *p++ = '\\'; - } else { - if (*ptr >= 32 && *ptr <= 126) { - *p++ = *ptr; - } else { - sprintf(p, "\\%02X", *ptr); - p += 3; - } - } - ptr++; - } - - if (ptr == end) - *p++ = '\"'; - *p++ = 0; - - printk(KERN_INFO "%s: %-13s%s\n", strip_info->dev->name, msg, pkt_text); -} - - -/************************************************************************/ -/* Byte stuffing/unstuffing routines */ - -/* Stuffing scheme: - * 00 Unused (reserved character) - * 01-3F Run of 2-64 different characters - * 40-7F Run of 1-64 different characters plus a single zero at the end - * 80-BF Run of 1-64 of the same character - * C0-FF Run of 1-64 zeroes (ASCII 0) - */ - -typedef enum { - Stuff_Diff = 0x00, - Stuff_DiffZero = 0x40, - Stuff_Same = 0x80, - Stuff_Zero = 0xC0, - Stuff_NoCode = 0xFF, /* Special code, meaning no code selected */ - - Stuff_CodeMask = 0xC0, - Stuff_CountMask = 0x3F, - Stuff_MaxCount = 0x3F, - Stuff_Magic = 0x0D /* The value we are eliminating */ -} StuffingCode; - -/* StuffData encodes the data starting at "src" for "length" bytes. - * It writes it to the buffer pointed to by "dst" (which must be at least - * as long as 1 + 65/64 of the input length). The output may be up to 1.6% - * larger than the input for pathological input, but will usually be smaller. - * StuffData returns the new value of the dst pointer as its result. - * "code_ptr_ptr" points to a "__u8 *" which is used to hold encoding state - * between calls, allowing an encoded packet to be incrementally built up - * from small parts. On the first call, the "__u8 *" pointed to should be - * initialized to NULL; between subsequent calls the calling routine should - * leave the value alone and simply pass it back unchanged so that the - * encoder can recover its current state. - */ - -#define StuffData_FinishBlock(X) \ -(*code_ptr = (X) ^ Stuff_Magic, code = Stuff_NoCode) - -static __u8 *StuffData(__u8 * src, __u32 length, __u8 * dst, - __u8 ** code_ptr_ptr) -{ - __u8 *end = src + length; - __u8 *code_ptr = *code_ptr_ptr; - __u8 code = Stuff_NoCode, count = 0; - - if (!length) - return (dst); - - if (code_ptr) { - /* - * Recover state from last call, if applicable - */ - code = (*code_ptr ^ Stuff_Magic) & Stuff_CodeMask; - count = (*code_ptr ^ Stuff_Magic) & Stuff_CountMask; - } - - while (src < end) { - switch (code) { - /* Stuff_NoCode: If no current code, select one */ - case Stuff_NoCode: - /* Record where we're going to put this code */ - code_ptr = dst++; - count = 0; /* Reset the count (zero means one instance) */ - /* Tentatively start a new block */ - if (*src == 0) { - code = Stuff_Zero; - src++; - } else { - code = Stuff_Same; - *dst++ = *src++ ^ Stuff_Magic; - } - /* Note: We optimistically assume run of same -- */ - /* which will be fixed later in Stuff_Same */ - /* if it turns out not to be true. */ - break; - - /* Stuff_Zero: We already have at least one zero encoded */ - case Stuff_Zero: - /* If another zero, count it, else finish this code block */ - if (*src == 0) { - count++; - src++; - } else { - StuffData_FinishBlock(Stuff_Zero + count); - } - break; - - /* Stuff_Same: We already have at least one byte encoded */ - case Stuff_Same: - /* If another one the same, count it */ - if ((*src ^ Stuff_Magic) == code_ptr[1]) { - count++; - src++; - break; - } - /* else, this byte does not match this block. */ - /* If we already have two or more bytes encoded, finish this code block */ - if (count) { - StuffData_FinishBlock(Stuff_Same + count); - break; - } - /* else, we only have one so far, so switch to Stuff_Diff code */ - code = Stuff_Diff; - /* and fall through to Stuff_Diff case below - * Note cunning cleverness here: case Stuff_Diff compares - * the current character with the previous two to see if it - * has a run of three the same. Won't this be an error if - * there aren't two previous characters stored to compare with? - * No. Because we know the current character is *not* the same - * as the previous one, the first test below will necessarily - * fail and the send half of the "if" won't be executed. - */ - - /* Stuff_Diff: We have at least two *different* bytes encoded */ - case Stuff_Diff: - /* If this is a zero, must encode a Stuff_DiffZero, and begin a new block */ - if (*src == 0) { - StuffData_FinishBlock(Stuff_DiffZero + - count); - } - /* else, if we have three in a row, it is worth starting a Stuff_Same block */ - else if ((*src ^ Stuff_Magic) == dst[-1] - && dst[-1] == dst[-2]) { - /* Back off the last two characters we encoded */ - code += count - 2; - /* Note: "Stuff_Diff + 0" is an illegal code */ - if (code == Stuff_Diff + 0) { - code = Stuff_Same + 0; - } - StuffData_FinishBlock(code); - code_ptr = dst - 2; - /* dst[-1] already holds the correct value */ - count = 2; /* 2 means three bytes encoded */ - code = Stuff_Same; - } - /* else, another different byte, so add it to the block */ - else { - *dst++ = *src ^ Stuff_Magic; - count++; - } - src++; /* Consume the byte */ - break; - } - if (count == Stuff_MaxCount) { - StuffData_FinishBlock(code + count); - } - } - if (code == Stuff_NoCode) { - *code_ptr_ptr = NULL; - } else { - *code_ptr_ptr = code_ptr; - StuffData_FinishBlock(code + count); - } - return (dst); -} - -/* - * UnStuffData decodes the data at "src", up to (but not including) "end". - * It writes the decoded data into the buffer pointed to by "dst", up to a - * maximum of "dst_length", and returns the new value of "src" so that a - * follow-on call can read more data, continuing from where the first left off. - * - * There are three types of results: - * 1. The source data runs out before extracting "dst_length" bytes: - * UnStuffData returns NULL to indicate failure. - * 2. The source data produces exactly "dst_length" bytes: - * UnStuffData returns new_src = end to indicate that all bytes were consumed. - * 3. "dst_length" bytes are extracted, with more remaining. - * UnStuffData returns new_src < end to indicate that there are more bytes - * to be read. - * - * Note: The decoding may be destructive, in that it may alter the source - * data in the process of decoding it (this is necessary to allow a follow-on - * call to resume correctly). - */ - -static __u8 *UnStuffData(__u8 * src, __u8 * end, __u8 * dst, - __u32 dst_length) -{ - __u8 *dst_end = dst + dst_length; - /* Sanity check */ - if (!src || !end || !dst || !dst_length) - return (NULL); - while (src < end && dst < dst_end) { - int count = (*src ^ Stuff_Magic) & Stuff_CountMask; - switch ((*src ^ Stuff_Magic) & Stuff_CodeMask) { - case Stuff_Diff: - if (src + 1 + count >= end) - return (NULL); - do { - *dst++ = *++src ^ Stuff_Magic; - } - while (--count >= 0 && dst < dst_end); - if (count < 0) - src += 1; - else { - if (count == 0) - *src = Stuff_Same ^ Stuff_Magic; - else - *src = - (Stuff_Diff + - count) ^ Stuff_Magic; - } - break; - case Stuff_DiffZero: - if (src + 1 + count >= end) - return (NULL); - do { - *dst++ = *++src ^ Stuff_Magic; - } - while (--count >= 0 && dst < dst_end); - if (count < 0) - *src = Stuff_Zero ^ Stuff_Magic; - else - *src = - (Stuff_DiffZero + count) ^ Stuff_Magic; - break; - case Stuff_Same: - if (src + 1 >= end) - return (NULL); - do { - *dst++ = src[1] ^ Stuff_Magic; - } - while (--count >= 0 && dst < dst_end); - if (count < 0) - src += 2; - else - *src = (Stuff_Same + count) ^ Stuff_Magic; - break; - case Stuff_Zero: - do { - *dst++ = 0; - } - while (--count >= 0 && dst < dst_end); - if (count < 0) - src += 1; - else - *src = (Stuff_Zero + count) ^ Stuff_Magic; - break; - } - } - if (dst < dst_end) - return (NULL); - else - return (src); -} - - -/************************************************************************/ -/* General routines for STRIP */ - -/* - * set_baud sets the baud rate to the rate defined by baudcode - */ -static void set_baud(struct tty_struct *tty, speed_t baudrate) -{ - struct ktermios old_termios; - - mutex_lock(&tty->termios_mutex); - old_termios =*(tty->termios); - tty_encode_baud_rate(tty, baudrate, baudrate); - tty->ops->set_termios(tty, &old_termios); - mutex_unlock(&tty->termios_mutex); -} - -/* - * Convert a string to a Metricom Address. - */ - -#define IS_RADIO_ADDRESS(p) ( \ - isdigit((p)[0]) && isdigit((p)[1]) && isdigit((p)[2]) && isdigit((p)[3]) && \ - (p)[4] == '-' && \ - isdigit((p)[5]) && isdigit((p)[6]) && isdigit((p)[7]) && isdigit((p)[8]) ) - -static int string_to_radio_address(MetricomAddress * addr, __u8 * p) -{ - if (!IS_RADIO_ADDRESS(p)) - return (1); - addr->c[0] = 0; - addr->c[1] = 0; - addr->c[2] = READHEX(p[0]) << 4 | READHEX(p[1]); - addr->c[3] = READHEX(p[2]) << 4 | READHEX(p[3]); - addr->c[4] = READHEX(p[5]) << 4 | READHEX(p[6]); - addr->c[5] = READHEX(p[7]) << 4 | READHEX(p[8]); - return (0); -} - -/* - * Convert a Metricom Address to a string. - */ - -static __u8 *radio_address_to_string(const MetricomAddress * addr, - MetricomAddressString * p) -{ - sprintf(p->c, "%02X%02X-%02X%02X", addr->c[2], addr->c[3], - addr->c[4], addr->c[5]); - return (p->c); -} - -/* - * Note: Must make sure sx_size is big enough to receive a stuffed - * MAX_RECV_MTU packet. Additionally, we also want to ensure that it's - * big enough to receive a large radio neighbour list (currently 4K). - */ - -static int allocate_buffers(struct strip *strip_info, int mtu) -{ - struct net_device *dev = strip_info->dev; - int sx_size = max_t(int, STRIP_ENCAP_SIZE(MAX_RECV_MTU), 4096); - int tx_size = STRIP_ENCAP_SIZE(mtu) + MaxCommandStringLength; - __u8 *r = kmalloc(MAX_RECV_MTU, GFP_ATOMIC); - __u8 *s = kmalloc(sx_size, GFP_ATOMIC); - __u8 *t = kmalloc(tx_size, GFP_ATOMIC); - if (r && s && t) { - strip_info->rx_buff = r; - strip_info->sx_buff = s; - strip_info->tx_buff = t; - strip_info->sx_size = sx_size; - strip_info->tx_size = tx_size; - strip_info->mtu = dev->mtu = mtu; - return (1); - } - kfree(r); - kfree(s); - kfree(t); - return (0); -} - -/* - * MTU has been changed by the IP layer. - * We could be in - * an upcall from the tty driver, or in an ip packet queue. - */ -static int strip_change_mtu(struct net_device *dev, int new_mtu) -{ - struct strip *strip_info = netdev_priv(dev); - int old_mtu = strip_info->mtu; - unsigned char *orbuff = strip_info->rx_buff; - unsigned char *osbuff = strip_info->sx_buff; - unsigned char *otbuff = strip_info->tx_buff; - - if (new_mtu > MAX_SEND_MTU) { - printk(KERN_ERR - "%s: MTU exceeds maximum allowable (%d), MTU change cancelled.\n", - strip_info->dev->name, MAX_SEND_MTU); - return -EINVAL; - } - - spin_lock_bh(&strip_lock); - if (!allocate_buffers(strip_info, new_mtu)) { - printk(KERN_ERR "%s: unable to grow strip buffers, MTU change cancelled.\n", - strip_info->dev->name); - spin_unlock_bh(&strip_lock); - return -ENOMEM; - } - - if (strip_info->sx_count) { - if (strip_info->sx_count <= strip_info->sx_size) - memcpy(strip_info->sx_buff, osbuff, - strip_info->sx_count); - else { - strip_info->discard = strip_info->sx_count; - strip_info->rx_over_errors++; - } - } - - if (strip_info->tx_left) { - if (strip_info->tx_left <= strip_info->tx_size) - memcpy(strip_info->tx_buff, strip_info->tx_head, - strip_info->tx_left); - else { - strip_info->tx_left = 0; - strip_info->tx_dropped++; - } - } - strip_info->tx_head = strip_info->tx_buff; - spin_unlock_bh(&strip_lock); - - printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n", - strip_info->dev->name, old_mtu, strip_info->mtu); - - kfree(orbuff); - kfree(osbuff); - kfree(otbuff); - return 0; -} - -static void strip_unlock(struct strip *strip_info) -{ - /* - * Set the timer to go off in one second. - */ - strip_info->idle_timer.expires = jiffies + 1 * HZ; - add_timer(&strip_info->idle_timer); - netif_wake_queue(strip_info->dev); -} - - - -/* - * If the time is in the near future, time_delta prints the number of - * seconds to go into the buffer and returns the address of the buffer. - * If the time is not in the near future, it returns the address of the - * string "Not scheduled" The buffer must be long enough to contain the - * ascii representation of the number plus 9 charactes for the " seconds" - * and the null character. - */ -#ifdef CONFIG_PROC_FS -static char *time_delta(char buffer[], long time) -{ - time -= jiffies; - if (time > LongTime / 2) - return ("Not scheduled"); - if (time < 0) - time = 0; /* Don't print negative times */ - sprintf(buffer, "%ld seconds", time / HZ); - return (buffer); -} - -/* get Nth element of the linked list */ -static struct strip *strip_get_idx(loff_t pos) -{ - struct strip *str; - int i = 0; - - list_for_each_entry_rcu(str, &strip_list, list) { - if (pos == i) - return str; - ++i; - } - return NULL; -} - -static void *strip_seq_start(struct seq_file *seq, loff_t *pos) -{ - rcu_read_lock(); - return *pos ? strip_get_idx(*pos - 1) : SEQ_START_TOKEN; -} - -static void *strip_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - struct list_head *l; - struct strip *s; - - ++*pos; - if (v == SEQ_START_TOKEN) - return strip_get_idx(1); - - s = v; - l = &s->list; - list_for_each_continue_rcu(l, &strip_list) { - return list_entry(l, struct strip, list); - } - return NULL; -} - -static void strip_seq_stop(struct seq_file *seq, void *v) -{ - rcu_read_unlock(); -} - -static void strip_seq_neighbours(struct seq_file *seq, - const MetricomNodeTable * table, - const char *title) -{ - /* We wrap this in a do/while loop, so if the table changes */ - /* while we're reading it, we just go around and try again. */ - struct timeval t; - - do { - int i; - t = table->timestamp; - if (table->num_nodes) - seq_printf(seq, "\n %s\n", title); - for (i = 0; i < table->num_nodes; i++) { - MetricomNode node; - - spin_lock_bh(&strip_lock); - node = table->node[i]; - spin_unlock_bh(&strip_lock); - seq_printf(seq, " %s\n", node.c); - } - } while (table->timestamp.tv_sec != t.tv_sec - || table->timestamp.tv_usec != t.tv_usec); -} - -/* - * This function prints radio status information via the seq_file - * interface. The interface takes care of buffer size and over - * run issues. - * - * The buffer in seq_file is PAGESIZE (4K) - * so this routine should never print more or it will get truncated. - * With the maximum of 32 portables and 32 poletops - * reported, the routine outputs 3107 bytes into the buffer. - */ -static void strip_seq_status_info(struct seq_file *seq, - const struct strip *strip_info) -{ - char temp[32]; - MetricomAddressString addr_string; - - /* First, we must copy all of our data to a safe place, */ - /* in case a serial interrupt comes in and changes it. */ - int tx_left = strip_info->tx_left; - unsigned long rx_average_pps = strip_info->rx_average_pps; - unsigned long tx_average_pps = strip_info->tx_average_pps; - unsigned long sx_average_pps = strip_info->sx_average_pps; - int working = strip_info->working; - int firmware_level = strip_info->firmware_level; - long watchdog_doprobe = strip_info->watchdog_doprobe; - long watchdog_doreset = strip_info->watchdog_doreset; - long gratuitous_arp = strip_info->gratuitous_arp; - long arp_interval = strip_info->arp_interval; - FirmwareVersion firmware_version = strip_info->firmware_version; - SerialNumber serial_number = strip_info->serial_number; - BatteryVoltage battery_voltage = strip_info->battery_voltage; - char *if_name = strip_info->dev->name; - MetricomAddress true_dev_addr = strip_info->true_dev_addr; - MetricomAddress dev_dev_addr = - *(MetricomAddress *) strip_info->dev->dev_addr; - int manual_dev_addr = strip_info->manual_dev_addr; -#ifdef EXT_COUNTERS - unsigned long rx_bytes = strip_info->rx_bytes; - unsigned long tx_bytes = strip_info->tx_bytes; - unsigned long rx_rbytes = strip_info->rx_rbytes; - unsigned long tx_rbytes = strip_info->tx_rbytes; - unsigned long rx_sbytes = strip_info->rx_sbytes; - unsigned long tx_sbytes = strip_info->tx_sbytes; - unsigned long rx_ebytes = strip_info->rx_ebytes; - unsigned long tx_ebytes = strip_info->tx_ebytes; -#endif - - seq_printf(seq, "\nInterface name\t\t%s\n", if_name); - seq_printf(seq, " Radio working:\t\t%s\n", working ? "Yes" : "No"); - radio_address_to_string(&true_dev_addr, &addr_string); - seq_printf(seq, " Radio address:\t\t%s\n", addr_string.c); - if (manual_dev_addr) { - radio_address_to_string(&dev_dev_addr, &addr_string); - seq_printf(seq, " Device address:\t%s\n", addr_string.c); - } - seq_printf(seq, " Firmware version:\t%s", !working ? "Unknown" : - !firmware_level ? "Should be upgraded" : - firmware_version.c); - if (firmware_level >= ChecksummedMessages) - seq_printf(seq, " (Checksums Enabled)"); - seq_printf(seq, "\n"); - seq_printf(seq, " Serial number:\t\t%s\n", serial_number.c); - seq_printf(seq, " Battery voltage:\t%s\n", battery_voltage.c); - seq_printf(seq, " Transmit queue (bytes):%d\n", tx_left); - seq_printf(seq, " Receive packet rate: %ld packets per second\n", - rx_average_pps / 8); - seq_printf(seq, " Transmit packet rate: %ld packets per second\n", - tx_average_pps / 8); - seq_printf(seq, " Sent packet rate: %ld packets per second\n", - sx_average_pps / 8); - seq_printf(seq, " Next watchdog probe:\t%s\n", - time_delta(temp, watchdog_doprobe)); - seq_printf(seq, " Next watchdog reset:\t%s\n", - time_delta(temp, watchdog_doreset)); - seq_printf(seq, " Next gratuitous ARP:\t"); - - if (!memcmp - (strip_info->dev->dev_addr, zero_address.c, - sizeof(zero_address))) - seq_printf(seq, "Disabled\n"); - else { - seq_printf(seq, "%s\n", time_delta(temp, gratuitous_arp)); - seq_printf(seq, " Next ARP interval:\t%ld seconds\n", - JIFFIE_TO_SEC(arp_interval)); - } - - if (working) { -#ifdef EXT_COUNTERS - seq_printf(seq, "\n"); - seq_printf(seq, - " Total bytes: \trx:\t%lu\ttx:\t%lu\n", - rx_bytes, tx_bytes); - seq_printf(seq, - " thru radio: \trx:\t%lu\ttx:\t%lu\n", - rx_rbytes, tx_rbytes); - seq_printf(seq, - " thru serial port: \trx:\t%lu\ttx:\t%lu\n", - rx_sbytes, tx_sbytes); - seq_printf(seq, - " Total stat/err bytes:\trx:\t%lu\ttx:\t%lu\n", - rx_ebytes, tx_ebytes); -#endif - strip_seq_neighbours(seq, &strip_info->poletops, - "Poletops:"); - strip_seq_neighbours(seq, &strip_info->portables, - "Portables:"); - } -} - -/* - * This function is exports status information from the STRIP driver through - * the /proc file system. - */ -static int strip_seq_show(struct seq_file *seq, void *v) -{ - if (v == SEQ_START_TOKEN) - seq_printf(seq, "strip_version: %s\n", StripVersion); - else - strip_seq_status_info(seq, (const struct strip *)v); - return 0; -} - - -static struct seq_operations strip_seq_ops = { - .start = strip_seq_start, - .next = strip_seq_next, - .stop = strip_seq_stop, - .show = strip_seq_show, -}; - -static int strip_seq_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &strip_seq_ops); -} - -static const struct file_operations strip_seq_fops = { - .owner = THIS_MODULE, - .open = strip_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; -#endif - - - -/************************************************************************/ -/* Sending routines */ - -static void ResetRadio(struct strip *strip_info) -{ - struct tty_struct *tty = strip_info->tty; - static const char init[] = "ate0q1dt**starmode\r**"; - StringDescriptor s = { init, sizeof(init) - 1 }; - - /* - * If the radio isn't working anymore, - * we should clear the old status information. - */ - if (strip_info->working) { - printk(KERN_INFO "%s: No response: Resetting radio.\n", - strip_info->dev->name); - strip_info->firmware_version.c[0] = '\0'; - strip_info->serial_number.c[0] = '\0'; - strip_info->battery_voltage.c[0] = '\0'; - strip_info->portables.num_nodes = 0; - do_gettimeofday(&strip_info->portables.timestamp); - strip_info->poletops.num_nodes = 0; - do_gettimeofday(&strip_info->poletops.timestamp); - } - - strip_info->pps_timer = jiffies; - strip_info->rx_pps_count = 0; - strip_info->tx_pps_count = 0; - strip_info->sx_pps_count = 0; - strip_info->rx_average_pps = 0; - strip_info->tx_average_pps = 0; - strip_info->sx_average_pps = 0; - - /* Mark radio address as unknown */ - *(MetricomAddress *) & strip_info->true_dev_addr = zero_address; - if (!strip_info->manual_dev_addr) - *(MetricomAddress *) strip_info->dev->dev_addr = - zero_address; - strip_info->working = FALSE; - strip_info->firmware_level = NoStructure; - strip_info->next_command = CompatibilityCommand; - strip_info->watchdog_doprobe = jiffies + 10 * HZ; - strip_info->watchdog_doreset = jiffies + 1 * HZ; - - /* If the user has selected a baud rate above 38.4 see what magic we have to do */ - if (strip_info->user_baud > 38400) { - /* - * Subtle stuff: Pay attention :-) - * If the serial port is currently at the user's selected (>38.4) rate, - * then we temporarily switch to 19.2 and issue the ATS304 command - * to tell the radio to switch to the user's selected rate. - * If the serial port is not currently at that rate, that means we just - * issued the ATS304 command last time through, so this time we restore - * the user's selected rate and issue the normal starmode reset string. - */ - if (strip_info->user_baud == tty_get_baud_rate(tty)) { - static const char b0[] = "ate0q1s304=57600\r"; - static const char b1[] = "ate0q1s304=115200\r"; - static const StringDescriptor baudstring[2] = - { {b0, sizeof(b0) - 1} - , {b1, sizeof(b1) - 1} - }; - set_baud(tty, 19200); - if (strip_info->user_baud == 57600) - s = baudstring[0]; - else if (strip_info->user_baud == 115200) - s = baudstring[1]; - else - s = baudstring[1]; /* For now */ - } else - set_baud(tty, strip_info->user_baud); - } - - tty->ops->write(tty, s.string, s.length); -#ifdef EXT_COUNTERS - strip_info->tx_ebytes += s.length; -#endif -} - -/* - * Called by the driver when there's room for more data. If we have - * more packets to send, we send them here. - */ - -static void strip_write_some_more(struct tty_struct *tty) -{ - struct strip *strip_info = (struct strip *) tty->disc_data; - - /* First make sure we're connected. */ - if (!strip_info || strip_info->magic != STRIP_MAGIC || - !netif_running(strip_info->dev)) - return; - - if (strip_info->tx_left > 0) { - int num_written = - tty->ops->write(tty, strip_info->tx_head, - strip_info->tx_left); - strip_info->tx_left -= num_written; - strip_info->tx_head += num_written; -#ifdef EXT_COUNTERS - strip_info->tx_sbytes += num_written; -#endif - } else { /* Else start transmission of another packet */ - - tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); - strip_unlock(strip_info); - } -} - -static __u8 *add_checksum(__u8 * buffer, __u8 * end) -{ - __u16 sum = 0; - __u8 *p = buffer; - while (p < end) - sum += *p++; - end[3] = hextable[sum & 0xF]; - sum >>= 4; - end[2] = hextable[sum & 0xF]; - sum >>= 4; - end[1] = hextable[sum & 0xF]; - sum >>= 4; - end[0] = hextable[sum & 0xF]; - return (end + 4); -} - -static unsigned char *strip_make_packet(unsigned char *buffer, - struct strip *strip_info, - struct sk_buff *skb) -{ - __u8 *ptr = buffer; - __u8 *stuffstate = NULL; - STRIP_Header *header = (STRIP_Header *) skb->data; - MetricomAddress haddr = header->dst_addr; - int len = skb->len - sizeof(STRIP_Header); - MetricomKey key; - - /*HexDump("strip_make_packet", strip_info, skb->data, skb->data + skb->len); */ - - if (header->protocol == htons(ETH_P_IP)) - key = SIP0Key; - else if (header->protocol == htons(ETH_P_ARP)) - key = ARP0Key; - else { - printk(KERN_ERR - "%s: strip_make_packet: Unknown packet type 0x%04X\n", - strip_info->dev->name, ntohs(header->protocol)); - return (NULL); - } - - if (len > strip_info->mtu) { - printk(KERN_ERR - "%s: Dropping oversized transmit packet: %d bytes\n", - strip_info->dev->name, len); - return (NULL); - } - - /* - * If we're sending to ourselves, discard the packet. - * (Metricom radios choke if they try to send a packet to their own address.) - */ - if (!memcmp(haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) { - printk(KERN_ERR "%s: Dropping packet addressed to self\n", - strip_info->dev->name); - return (NULL); - } - - /* - * If this is a broadcast packet, send it to our designated Metricom - * 'broadcast hub' radio (First byte of address being 0xFF means broadcast) - */ - if (haddr.c[0] == 0xFF) { - __be32 brd = 0; - struct in_device *in_dev; - - rcu_read_lock(); - in_dev = __in_dev_get_rcu(strip_info->dev); - if (in_dev == NULL) { - rcu_read_unlock(); - return NULL; - } - if (in_dev->ifa_list) - brd = in_dev->ifa_list->ifa_broadcast; - rcu_read_unlock(); - - /* arp_query returns 1 if it succeeds in looking up the address, 0 if it fails */ - if (!arp_query(haddr.c, brd, strip_info->dev)) { - printk(KERN_ERR - "%s: Unable to send packet (no broadcast hub configured)\n", - strip_info->dev->name); - return (NULL); - } - /* - * If we are the broadcast hub, don't bother sending to ourselves. - * (Metricom radios choke if they try to send a packet to their own address.) - */ - if (!memcmp - (haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) - return (NULL); - } - - *ptr++ = 0x0D; - *ptr++ = '*'; - *ptr++ = hextable[haddr.c[2] >> 4]; - *ptr++ = hextable[haddr.c[2] & 0xF]; - *ptr++ = hextable[haddr.c[3] >> 4]; - *ptr++ = hextable[haddr.c[3] & 0xF]; - *ptr++ = '-'; - *ptr++ = hextable[haddr.c[4] >> 4]; - *ptr++ = hextable[haddr.c[4] & 0xF]; - *ptr++ = hextable[haddr.c[5] >> 4]; - *ptr++ = hextable[haddr.c[5] & 0xF]; - *ptr++ = '*'; - *ptr++ = key.c[0]; - *ptr++ = key.c[1]; - *ptr++ = key.c[2]; - *ptr++ = key.c[3]; - - ptr = - StuffData(skb->data + sizeof(STRIP_Header), len, ptr, - &stuffstate); - - if (strip_info->firmware_level >= ChecksummedMessages) - ptr = add_checksum(buffer + 1, ptr); - - *ptr++ = 0x0D; - return (ptr); -} - -static void strip_send(struct strip *strip_info, struct sk_buff *skb) -{ - MetricomAddress haddr; - unsigned char *ptr = strip_info->tx_buff; - int doreset = (long) jiffies - strip_info->watchdog_doreset >= 0; - int doprobe = (long) jiffies - strip_info->watchdog_doprobe >= 0 - && !doreset; - __be32 addr, brd; - - /* - * 1. If we have a packet, encapsulate it and put it in the buffer - */ - if (skb) { - char *newptr = strip_make_packet(ptr, strip_info, skb); - strip_info->tx_pps_count++; - if (!newptr) - strip_info->tx_dropped++; - else { - ptr = newptr; - strip_info->sx_pps_count++; - strip_info->tx_packets++; /* Count another successful packet */ -#ifdef EXT_COUNTERS - strip_info->tx_bytes += skb->len; - strip_info->tx_rbytes += ptr - strip_info->tx_buff; -#endif - /*DumpData("Sending:", strip_info, strip_info->tx_buff, ptr); */ - /*HexDump("Sending", strip_info, strip_info->tx_buff, ptr); */ - } - } - - /* - * 2. If it is time for another tickle, tack it on, after the packet - */ - if (doprobe) { - StringDescriptor ts = CommandString[strip_info->next_command]; -#if TICKLE_TIMERS - { - struct timeval tv; - do_gettimeofday(&tv); - printk(KERN_INFO "**** Sending tickle string %d at %02d.%06d\n", - strip_info->next_command, tv.tv_sec % 100, - tv.tv_usec); - } -#endif - if (ptr == strip_info->tx_buff) - *ptr++ = 0x0D; - - *ptr++ = '*'; /* First send "**" to provoke an error message */ - *ptr++ = '*'; - - /* Then add the command */ - memcpy(ptr, ts.string, ts.length); - - /* Add a checksum ? */ - if (strip_info->firmware_level < ChecksummedMessages) - ptr += ts.length; - else - ptr = add_checksum(ptr, ptr + ts.length); - - *ptr++ = 0x0D; /* Terminate the command with a <CR> */ - - /* Cycle to next periodic command? */ - if (strip_info->firmware_level >= StructuredMessages) - if (++strip_info->next_command >= - ARRAY_SIZE(CommandString)) - strip_info->next_command = 0; -#ifdef EXT_COUNTERS - strip_info->tx_ebytes += ts.length; -#endif - strip_info->watchdog_doprobe = jiffies + 10 * HZ; - strip_info->watchdog_doreset = jiffies + 1 * HZ; - /*printk(KERN_INFO "%s: Routine radio test.\n", strip_info->dev->name); */ - } - - /* - * 3. Set up the strip_info ready to send the data (if any). - */ - strip_info->tx_head = strip_info->tx_buff; - strip_info->tx_left = ptr - strip_info->tx_buff; - strip_info->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP); - - /* - * 4. Debugging check to make sure we're not overflowing the buffer. - */ - if (strip_info->tx_size - strip_info->tx_left < 20) - printk(KERN_ERR "%s: Sending%5d bytes;%5d bytes free.\n", - strip_info->dev->name, strip_info->tx_left, - strip_info->tx_size - strip_info->tx_left); - - /* - * 5. If watchdog has expired, reset the radio. Note: if there's data waiting in - * the buffer, strip_write_some_more will send it after the reset has finished - */ - if (doreset) { - ResetRadio(strip_info); - return; - } - - if (1) { - struct in_device *in_dev; - - brd = addr = 0; - rcu_read_lock(); - in_dev = __in_dev_get_rcu(strip_info->dev); - if (in_dev) { - if (in_dev->ifa_list) { - brd = in_dev->ifa_list->ifa_broadcast; - addr = in_dev->ifa_list->ifa_local; - } - } - rcu_read_unlock(); - } - - - /* - * 6. If it is time for a periodic ARP, queue one up to be sent. - * We only do this if: - * 1. The radio is working - * 2. It's time to send another periodic ARP - * 3. We really know what our address is (and it is not manually set to zero) - * 4. We have a designated broadcast address configured - * If we queue up an ARP packet when we don't have a designated broadcast - * address configured, then the packet will just have to be discarded in - * strip_make_packet. This is not fatal, but it causes misleading information - * to be displayed in tcpdump. tcpdump will report that periodic APRs are - * being sent, when in fact they are not, because they are all being dropped - * in the strip_make_packet routine. - */ - if (strip_info->working - && (long) jiffies - strip_info->gratuitous_arp >= 0 - && memcmp(strip_info->dev->dev_addr, zero_address.c, - sizeof(zero_address)) - && arp_query(haddr.c, brd, strip_info->dev)) { - /*printk(KERN_INFO "%s: Sending gratuitous ARP with interval %ld\n", - strip_info->dev->name, strip_info->arp_interval / HZ); */ - strip_info->gratuitous_arp = - jiffies + strip_info->arp_interval; - strip_info->arp_interval *= 2; - if (strip_info->arp_interval > MaxARPInterval) - strip_info->arp_interval = MaxARPInterval; - if (addr) - arp_send(ARPOP_REPLY, ETH_P_ARP, addr, /* Target address of ARP packet is our address */ - strip_info->dev, /* Device to send packet on */ - addr, /* Source IP address this ARP packet comes from */ - NULL, /* Destination HW address is NULL (broadcast it) */ - strip_info->dev->dev_addr, /* Source HW address is our HW address */ - strip_info->dev->dev_addr); /* Target HW address is our HW address (redundant) */ - } - - /* - * 7. All ready. Start the transmission - */ - strip_write_some_more(strip_info->tty); -} - -/* Encapsulate a datagram and kick it into a TTY queue. */ -static int strip_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct strip *strip_info = netdev_priv(dev); - - if (!netif_running(dev)) { - printk(KERN_ERR "%s: xmit call when iface is down\n", - dev->name); - return (1); - } - - netif_stop_queue(dev); - - del_timer(&strip_info->idle_timer); - - - if (time_after(jiffies, strip_info->pps_timer + HZ)) { - unsigned long t = jiffies - strip_info->pps_timer; - unsigned long rx_pps_count = (strip_info->rx_pps_count * HZ * 8 + t / 2) / t; - unsigned long tx_pps_count = (strip_info->tx_pps_count * HZ * 8 + t / 2) / t; - unsigned long sx_pps_count = (strip_info->sx_pps_count * HZ * 8 + t / 2) / t; - - strip_info->pps_timer = jiffies; - strip_info->rx_pps_count = 0; - strip_info->tx_pps_count = 0; - strip_info->sx_pps_count = 0; - - strip_info->rx_average_pps = (strip_info->rx_average_pps + rx_pps_count + 1) / 2; - strip_info->tx_average_pps = (strip_info->tx_average_pps + tx_pps_count + 1) / 2; - strip_info->sx_average_pps = (strip_info->sx_average_pps + sx_pps_count + 1) / 2; - - if (rx_pps_count / 8 >= 10) - printk(KERN_INFO "%s: WARNING: Receiving %ld packets per second.\n", - strip_info->dev->name, rx_pps_count / 8); - if (tx_pps_count / 8 >= 10) - printk(KERN_INFO "%s: WARNING: Tx %ld packets per second.\n", - strip_info->dev->name, tx_pps_count / 8); - if (sx_pps_count / 8 >= 10) - printk(KERN_INFO "%s: WARNING: Sending %ld packets per second.\n", - strip_info->dev->name, sx_pps_count / 8); - } - - spin_lock_bh(&strip_lock); - - strip_send(strip_info, skb); - - spin_unlock_bh(&strip_lock); - - if (skb) - dev_kfree_skb(skb); - return 0; -} - -/* - * IdleTask periodically calls strip_xmit, so even when we have no IP packets - * to send for an extended period of time, the watchdog processing still gets - * done to ensure that the radio stays in Starmode - */ - -static void strip_IdleTask(unsigned long parameter) -{ - strip_xmit(NULL, (struct net_device *) parameter); -} - -/* - * Create the MAC header for an arbitrary protocol layer - * - * saddr!=NULL means use this specific address (n/a for Metricom) - * saddr==NULL means use default device source address - * daddr!=NULL means use this destination address - * daddr==NULL means leave destination address alone - * (e.g. unresolved arp -- kernel will call - * rebuild_header later to fill in the address) - */ - -static int strip_header(struct sk_buff *skb, struct net_device *dev, - unsigned short type, const void *daddr, - const void *saddr, unsigned len) -{ - struct strip *strip_info = netdev_priv(dev); - STRIP_Header *header = (STRIP_Header *) skb_push(skb, sizeof(STRIP_Header)); - - /*printk(KERN_INFO "%s: strip_header 0x%04X %s\n", dev->name, type, - type == ETH_P_IP ? "IP" : type == ETH_P_ARP ? "ARP" : ""); */ - - header->src_addr = strip_info->true_dev_addr; - header->protocol = htons(type); - - /*HexDump("strip_header", netdev_priv(dev), skb->data, skb->data + skb->len); */ - - if (!daddr) - return (-dev->hard_header_len); - - header->dst_addr = *(MetricomAddress *) daddr; - return (dev->hard_header_len); -} - -/* - * Rebuild the MAC header. This is called after an ARP - * (or in future other address resolution) has completed on this - * sk_buff. We now let ARP fill in the other fields. - * I think this should return zero if packet is ready to send, - * or non-zero if it needs more time to do an address lookup - */ - -static int strip_rebuild_header(struct sk_buff *skb) -{ -#ifdef CONFIG_INET - STRIP_Header *header = (STRIP_Header *) skb->data; - - /* Arp find returns zero if if knows the address, */ - /* or if it doesn't know the address it sends an ARP packet and returns non-zero */ - return arp_find(header->dst_addr.c, skb) ? 1 : 0; -#else - return 0; -#endif -} - - -/************************************************************************/ -/* Receiving routines */ - -/* - * This function parses the response to the ATS300? command, - * extracting the radio version and serial number. - */ -static void get_radio_version(struct strip *strip_info, __u8 * ptr, __u8 * end) -{ - __u8 *p, *value_begin, *value_end; - int len; - - /* Determine the beginning of the second line of the payload */ - p = ptr; - while (p < end && *p != 10) - p++; - if (p >= end) - return; - p++; - value_begin = p; - - /* Determine the end of line */ - while (p < end && *p != 10) - p++; - if (p >= end) - return; - value_end = p; - p++; - - len = value_end - value_begin; - len = min_t(int, len, sizeof(FirmwareVersion) - 1); - if (strip_info->firmware_version.c[0] == 0) - printk(KERN_INFO "%s: Radio Firmware: %.*s\n", - strip_info->dev->name, len, value_begin); - sprintf(strip_info->firmware_version.c, "%.*s", len, value_begin); - - /* Look for the first colon */ - while (p < end && *p != ':') - p++; - if (p >= end) - return; - /* Skip over the space */ - p += 2; - len = sizeof(SerialNumber) - 1; - if (p + len <= end) { - sprintf(strip_info->serial_number.c, "%.*s", len, p); - } else { - printk(KERN_DEBUG - "STRIP: radio serial number shorter (%zd) than expected (%d)\n", - end - p, len); - } -} - -/* - * This function parses the response to the ATS325? command, - * extracting the radio battery voltage. - */ -static void get_radio_voltage(struct strip *strip_info, __u8 * ptr, __u8 * end) -{ - int len; - - len = sizeof(BatteryVoltage) - 1; - if (ptr + len <= end) { - sprintf(strip_info->battery_voltage.c, "%.*s", len, ptr); - } else { - printk(KERN_DEBUG - "STRIP: radio voltage string shorter (%zd) than expected (%d)\n", - end - ptr, len); - } -} - -/* - * This function parses the responses to the AT~LA and ATS311 commands, - * which list the radio's neighbours. - */ -static void get_radio_neighbours(MetricomNodeTable * table, __u8 * ptr, __u8 * end) -{ - table->num_nodes = 0; - while (ptr < end && table->num_nodes < NODE_TABLE_SIZE) { - MetricomNode *node = &table->node[table->num_nodes++]; - char *dst = node->c, *limit = dst + sizeof(*node) - 1; - while (ptr < end && *ptr <= 32) - ptr++; - while (ptr < end && dst < limit && *ptr != 10) - *dst++ = *ptr++; - *dst++ = 0; - while (ptr < end && ptr[-1] != 10) - ptr++; - } - do_gettimeofday(&table->timestamp); -} - -static int get_radio_address(struct strip *strip_info, __u8 * p) -{ - MetricomAddress addr; - - if (string_to_radio_address(&addr, p)) - return (1); - - /* See if our radio address has changed */ - if (memcmp(strip_info->true_dev_addr.c, addr.c, sizeof(addr))) { - MetricomAddressString addr_string; - radio_address_to_string(&addr, &addr_string); - printk(KERN_INFO "%s: Radio address = %s\n", - strip_info->dev->name, addr_string.c); - strip_info->true_dev_addr = addr; - if (!strip_info->manual_dev_addr) - *(MetricomAddress *) strip_info->dev->dev_addr = - addr; - /* Give the radio a few seconds to get its head straight, then send an arp */ - strip_info->gratuitous_arp = jiffies + 15 * HZ; - strip_info->arp_interval = 1 * HZ; - } - return (0); -} - -static int verify_checksum(struct strip *strip_info) -{ - __u8 *p = strip_info->sx_buff; - __u8 *end = strip_info->sx_buff + strip_info->sx_count - 4; - u_short sum = - (READHEX16(end[0]) << 12) | (READHEX16(end[1]) << 8) | - (READHEX16(end[2]) << 4) | (READHEX16(end[3])); - while (p < end) - sum -= *p++; - if (sum == 0 && strip_info->firmware_level == StructuredMessages) { - strip_info->firmware_level = ChecksummedMessages; - printk(KERN_INFO "%s: Radio provides message checksums\n", - strip_info->dev->name); - } - return (sum == 0); -} - -static void RecvErr(char *msg, struct strip *strip_info) -{ - __u8 *ptr = strip_info->sx_buff; - __u8 *end = strip_info->sx_buff + strip_info->sx_count; - DumpData(msg, strip_info, ptr, end); - strip_info->rx_errors++; -} - -static void RecvErr_Message(struct strip *strip_info, __u8 * sendername, - const __u8 * msg, u_long len) -{ - if (has_prefix(msg, len, "001")) { /* Not in StarMode! */ - RecvErr("Error Msg:", strip_info); - printk(KERN_INFO "%s: Radio %s is not in StarMode\n", - strip_info->dev->name, sendername); - } - - else if (has_prefix(msg, len, "002")) { /* Remap handle */ - /* We ignore "Remap handle" messages for now */ - } - - else if (has_prefix(msg, len, "003")) { /* Can't resolve name */ - RecvErr("Error Msg:", strip_info); - printk(KERN_INFO "%s: Destination radio name is unknown\n", - strip_info->dev->name); - } - - else if (has_prefix(msg, len, "004")) { /* Name too small or missing */ - strip_info->watchdog_doreset = jiffies + LongTime; -#if TICKLE_TIMERS - { - struct timeval tv; - do_gettimeofday(&tv); - printk(KERN_INFO - "**** Got ERR_004 response at %02d.%06d\n", - tv.tv_sec % 100, tv.tv_usec); - } -#endif - if (!strip_info->working) { - strip_info->working = TRUE; - printk(KERN_INFO "%s: Radio now in starmode\n", - strip_info->dev->name); - /* - * If the radio has just entered a working state, we should do our first - * probe ASAP, so that we find out our radio address etc. without delay. - */ - strip_info->watchdog_doprobe = jiffies; - } - if (strip_info->firmware_level == NoStructure && sendername) { - strip_info->firmware_level = StructuredMessages; - strip_info->next_command = 0; /* Try to enable checksums ASAP */ - printk(KERN_INFO - "%s: Radio provides structured messages\n", - strip_info->dev->name); - } - if (strip_info->firmware_level >= StructuredMessages) { - /* - * If this message has a valid checksum on the end, then the call to verify_checksum - * will elevate the firmware_level to ChecksummedMessages for us. (The actual return - * code from verify_checksum is ignored here.) - */ - verify_checksum(strip_info); - /* - * If the radio has structured messages but we don't yet have all our information about it, - * we should do probes without delay, until we have gathered all the information - */ - if (!GOT_ALL_RADIO_INFO(strip_info)) - strip_info->watchdog_doprobe = jiffies; - } - } - - else if (has_prefix(msg, len, "005")) /* Bad count specification */ - RecvErr("Error Msg:", strip_info); - - else if (has_prefix(msg, len, "006")) /* Header too big */ - RecvErr("Error Msg:", strip_info); - - else if (has_prefix(msg, len, "007")) { /* Body too big */ - RecvErr("Error Msg:", strip_info); - printk(KERN_ERR - "%s: Error! Packet size too big for radio.\n", - strip_info->dev->name); - } - - else if (has_prefix(msg, len, "008")) { /* Bad character in name */ - RecvErr("Error Msg:", strip_info); - printk(KERN_ERR - "%s: Radio name contains illegal character\n", - strip_info->dev->name); - } - - else if (has_prefix(msg, len, "009")) /* No count or line terminator */ - RecvErr("Error Msg:", strip_info); - - else if (has_prefix(msg, len, "010")) /* Invalid checksum */ - RecvErr("Error Msg:", strip_info); - - else if (has_prefix(msg, len, "011")) /* Checksum didn't match */ - RecvErr("Error Msg:", strip_info); - - else if (has_prefix(msg, len, "012")) /* Failed to transmit packet */ - RecvErr("Error Msg:", strip_info); - - else - RecvErr("Error Msg:", strip_info); -} - -static void process_AT_response(struct strip *strip_info, __u8 * ptr, - __u8 * end) -{ - u_long len; - __u8 *p = ptr; - while (p < end && p[-1] != 10) - p++; /* Skip past first newline character */ - /* Now ptr points to the AT command, and p points to the text of the response. */ - len = p - ptr; - -#if TICKLE_TIMERS - { - struct timeval tv; - do_gettimeofday(&tv); - printk(KERN_INFO "**** Got AT response %.7s at %02d.%06d\n", - ptr, tv.tv_sec % 100, tv.tv_usec); - } -#endif - - if (has_prefix(ptr, len, "ATS300?")) - get_radio_version(strip_info, p, end); - else if (has_prefix(ptr, len, "ATS305?")) - get_radio_address(strip_info, p); - else if (has_prefix(ptr, len, "ATS311?")) - get_radio_neighbours(&strip_info->poletops, p, end); - else if (has_prefix(ptr, len, "ATS319=7")) - verify_checksum(strip_info); - else if (has_prefix(ptr, len, "ATS325?")) - get_radio_voltage(strip_info, p, end); - else if (has_prefix(ptr, len, "AT~LA")) - get_radio_neighbours(&strip_info->portables, p, end); - else - RecvErr("Unknown AT Response:", strip_info); -} - -static void process_ACK(struct strip *strip_info, __u8 * ptr, __u8 * end) -{ - /* Currently we don't do anything with ACKs from the radio */ -} - -static void process_Info(struct strip *strip_info, __u8 * ptr, __u8 * end) -{ - if (ptr + 16 > end) - RecvErr("Bad Info Msg:", strip_info); -} - -static struct net_device *get_strip_dev(struct strip *strip_info) -{ - /* If our hardware address is *manually set* to zero, and we know our */ - /* real radio hardware address, try to find another strip device that has been */ - /* manually set to that address that we can 'transfer ownership' of this packet to */ - if (strip_info->manual_dev_addr && - !memcmp(strip_info->dev->dev_addr, zero_address.c, - sizeof(zero_address)) - && memcmp(&strip_info->true_dev_addr, zero_address.c, - sizeof(zero_address))) { - struct net_device *dev; - read_lock_bh(&dev_base_lock); - for_each_netdev(&init_net, dev) { - if (dev->type == strip_info->dev->type && - !memcmp(dev->dev_addr, - &strip_info->true_dev_addr, - sizeof(MetricomAddress))) { - printk(KERN_INFO - "%s: Transferred packet ownership to %s.\n", - strip_info->dev->name, dev->name); - read_unlock_bh(&dev_base_lock); - return (dev); - } - } - read_unlock_bh(&dev_base_lock); - } - return (strip_info->dev); -} - -/* - * Send one completely decapsulated datagram to the next layer. - */ - -static void deliver_packet(struct strip *strip_info, STRIP_Header * header, - __u16 packetlen) -{ - struct sk_buff *skb = dev_alloc_skb(sizeof(STRIP_Header) + packetlen); - if (!skb) { - printk(KERN_ERR "%s: memory squeeze, dropping packet.\n", - strip_info->dev->name); - strip_info->rx_dropped++; - } else { - memcpy(skb_put(skb, sizeof(STRIP_Header)), header, - sizeof(STRIP_Header)); - memcpy(skb_put(skb, packetlen), strip_info->rx_buff, - packetlen); - skb->dev = get_strip_dev(strip_info); - skb->protocol = header->protocol; - skb_reset_mac_header(skb); - - /* Having put a fake header on the front of the sk_buff for the */ - /* benefit of tools like tcpdump, skb_pull now 'consumes' that */ - /* fake header before we hand the packet up to the next layer. */ - skb_pull(skb, sizeof(STRIP_Header)); - - /* Finally, hand the packet up to the next layer (e.g. IP or ARP, etc.) */ - strip_info->rx_packets++; - strip_info->rx_pps_count++; -#ifdef EXT_COUNTERS - strip_info->rx_bytes += packetlen; -#endif - skb->dev->last_rx = jiffies; - netif_rx(skb); - } -} - -static void process_IP_packet(struct strip *strip_info, - STRIP_Header * header, __u8 * ptr, - __u8 * end) -{ - __u16 packetlen; - - /* Decode start of the IP packet header */ - ptr = UnStuffData(ptr, end, strip_info->rx_buff, 4); - if (!ptr) { - RecvErr("IP Packet too short", strip_info); - return; - } - - packetlen = ((__u16) strip_info->rx_buff[2] << 8) | strip_info->rx_buff[3]; - - if (packetlen > MAX_RECV_MTU) { - printk(KERN_INFO "%s: Dropping oversized received IP packet: %d bytes\n", - strip_info->dev->name, packetlen); - strip_info->rx_dropped++; - return; - } - - /*printk(KERN_INFO "%s: Got %d byte IP packet\n", strip_info->dev->name, packetlen); */ - - /* Decode remainder of the IP packet */ - ptr = - UnStuffData(ptr, end, strip_info->rx_buff + 4, packetlen - 4); - if (!ptr) { - RecvErr("IP Packet too short", strip_info); - return; - } - - if (ptr < end) { - RecvErr("IP Packet too long", strip_info); - return; - } - - header->protocol = htons(ETH_P_IP); - - deliver_packet(strip_info, header, packetlen); -} - -static void process_ARP_packet(struct strip *strip_info, - STRIP_Header * header, __u8 * ptr, - __u8 * end) -{ - __u16 packetlen; - struct arphdr *arphdr = (struct arphdr *) strip_info->rx_buff; - - /* Decode start of the ARP packet */ - ptr = UnStuffData(ptr, end, strip_info->rx_buff, 8); - if (!ptr) { - RecvErr("ARP Packet too short", strip_info); - return; - } - - packetlen = 8 + (arphdr->ar_hln + arphdr->ar_pln) * 2; - - if (packetlen > MAX_RECV_MTU) { - printk(KERN_INFO - "%s: Dropping oversized received ARP packet: %d bytes\n", - strip_info->dev->name, packetlen); - strip_info->rx_dropped++; - return; - } - - /*printk(KERN_INFO "%s: Got %d byte ARP %s\n", - strip_info->dev->name, packetlen, - ntohs(arphdr->ar_op) == ARPOP_REQUEST ? "request" : "reply"); */ - - /* Decode remainder of the ARP packet */ - ptr = - UnStuffData(ptr, end, strip_info->rx_buff + 8, packetlen - 8); - if (!ptr) { - RecvErr("ARP Packet too short", strip_info); - return; - } - - if (ptr < end) { - RecvErr("ARP Packet too long", strip_info); - return; - } - - header->protocol = htons(ETH_P_ARP); - - deliver_packet(strip_info, header, packetlen); -} - -/* - * process_text_message processes a <CR>-terminated block of data received - * from the radio that doesn't begin with a '*' character. All normal - * Starmode communication messages with the radio begin with a '*', - * so any text that does not indicates a serial port error, a radio that - * is in Hayes command mode instead of Starmode, or a radio with really - * old firmware that doesn't frame its Starmode responses properly. - */ -static void process_text_message(struct strip *strip_info) -{ - __u8 *msg = strip_info->sx_buff; - int len = strip_info->sx_count; - - /* Check for anything that looks like it might be our radio name */ - /* (This is here for backwards compatibility with old firmware) */ - if (len == 9 && get_radio_address(strip_info, msg) == 0) - return; - - if (text_equal(msg, len, "OK")) - return; /* Ignore 'OK' responses from prior commands */ - if (text_equal(msg, len, "ERROR")) - return; /* Ignore 'ERROR' messages */ - if (has_prefix(msg, len, "ate0q1")) - return; /* Ignore character echo back from the radio */ - - /* Catch other error messages */ - /* (This is here for backwards compatibility with old firmware) */ - if (has_prefix(msg, len, "ERR_")) { - RecvErr_Message(strip_info, NULL, &msg[4], len - 4); - return; - } - - RecvErr("No initial *", strip_info); -} - -/* - * process_message processes a <CR>-terminated block of data received - * from the radio. If the radio is not in Starmode or has old firmware, - * it may be a line of text in response to an AT command. Ideally, with - * a current radio that's properly in Starmode, all data received should - * be properly framed and checksummed radio message blocks, containing - * either a starmode packet, or a other communication from the radio - * firmware, like "INF_" Info messages and &COMMAND responses. - */ -static void process_message(struct strip *strip_info) -{ - STRIP_Header header = { zero_address, zero_address, 0 }; - __u8 *ptr = strip_info->sx_buff; - __u8 *end = strip_info->sx_buff + strip_info->sx_count; - __u8 sendername[32], *sptr = sendername; - MetricomKey key; - - /*HexDump("Receiving", strip_info, ptr, end); */ - - /* Check for start of address marker, and then skip over it */ - if (*ptr == '*') - ptr++; - else { - process_text_message(strip_info); - return; - } - - /* Copy out the return address */ - while (ptr < end && *ptr != '*' - && sptr < ARRAY_END(sendername) - 1) - *sptr++ = *ptr++; - *sptr = 0; /* Null terminate the sender name */ - - /* Check for end of address marker, and skip over it */ - if (ptr >= end || *ptr != '*') { - RecvErr("No second *", strip_info); - return; - } - ptr++; /* Skip the second '*' */ - - /* If the sender name is "&COMMAND", ignore this 'packet' */ - /* (This is here for backwards compatibility with old firmware) */ - if (!strcmp(sendername, "&COMMAND")) { - strip_info->firmware_level = NoStructure; - strip_info->next_command = CompatibilityCommand; - return; - } - - if (ptr + 4 > end) { - RecvErr("No proto key", strip_info); - return; - } - - /* Get the protocol key out of the buffer */ - key.c[0] = *ptr++; - key.c[1] = *ptr++; - key.c[2] = *ptr++; - key.c[3] = *ptr++; - - /* If we're using checksums, verify the checksum at the end of the packet */ - if (strip_info->firmware_level >= ChecksummedMessages) { - end -= 4; /* Chop the last four bytes off the packet (they're the checksum) */ - if (ptr > end) { - RecvErr("Missing Checksum", strip_info); - return; - } - if (!verify_checksum(strip_info)) { - RecvErr("Bad Checksum", strip_info); - return; - } - } - - /*printk(KERN_INFO "%s: Got packet from \"%s\".\n", strip_info->dev->name, sendername); */ - - /* - * Fill in (pseudo) source and destination addresses in the packet. - * We assume that the destination address was our address (the radio does not - * tell us this). If the radio supplies a source address, then we use it. - */ - header.dst_addr = strip_info->true_dev_addr; - string_to_radio_address(&header.src_addr, sendername); - -#ifdef EXT_COUNTERS - if (key.l == SIP0Key.l) { - strip_info->rx_rbytes += (end - ptr); - process_IP_packet(strip_info, &header, ptr, end); - } else if (key.l == ARP0Key.l) { - strip_info->rx_rbytes += (end - ptr); - process_ARP_packet(strip_info, &header, ptr, end); - } else if (key.l == ATR_Key.l) { - strip_info->rx_ebytes += (end - ptr); - process_AT_response(strip_info, ptr, end); - } else if (key.l == ACK_Key.l) { - strip_info->rx_ebytes += (end - ptr); - process_ACK(strip_info, ptr, end); - } else if (key.l == INF_Key.l) { - strip_info->rx_ebytes += (end - ptr); - process_Info(strip_info, ptr, end); - } else if (key.l == ERR_Key.l) { - strip_info->rx_ebytes += (end - ptr); - RecvErr_Message(strip_info, sendername, ptr, end - ptr); - } else - RecvErr("Unrecognized protocol key", strip_info); -#else - if (key.l == SIP0Key.l) - process_IP_packet(strip_info, &header, ptr, end); - else if (key.l == ARP0Key.l) - process_ARP_packet(strip_info, &header, ptr, end); - else if (key.l == ATR_Key.l) - process_AT_response(strip_info, ptr, end); - else if (key.l == ACK_Key.l) - process_ACK(strip_info, ptr, end); - else if (key.l == INF_Key.l) - process_Info(strip_info, ptr, end); - else if (key.l == ERR_Key.l) - RecvErr_Message(strip_info, sendername, ptr, end - ptr); - else - RecvErr("Unrecognized protocol key", strip_info); -#endif -} - -#define TTYERROR(X) ((X) == TTY_BREAK ? "Break" : \ - (X) == TTY_FRAME ? "Framing Error" : \ - (X) == TTY_PARITY ? "Parity Error" : \ - (X) == TTY_OVERRUN ? "Hardware Overrun" : "Unknown Error") - -/* - * Handle the 'receiver data ready' interrupt. - * This function is called by the 'tty_io' module in the kernel when - * a block of STRIP data has been received, which can now be decapsulated - * and sent on to some IP layer for further processing. - */ - -static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) -{ - struct strip *strip_info = (struct strip *) tty->disc_data; - const unsigned char *end = cp + count; - - if (!strip_info || strip_info->magic != STRIP_MAGIC - || !netif_running(strip_info->dev)) - return; - - spin_lock_bh(&strip_lock); -#if 0 - { - struct timeval tv; - do_gettimeofday(&tv); - printk(KERN_INFO - "**** strip_receive_buf: %3d bytes at %02d.%06d\n", - count, tv.tv_sec % 100, tv.tv_usec); - } -#endif - -#ifdef EXT_COUNTERS - strip_info->rx_sbytes += count; -#endif - - /* Read the characters out of the buffer */ - while (cp < end) { - if (fp && *fp) - printk(KERN_INFO "%s: %s on serial port\n", - strip_info->dev->name, TTYERROR(*fp)); - if (fp && *fp++ && !strip_info->discard) { /* If there's a serial error, record it */ - /* If we have some characters in the buffer, discard them */ - strip_info->discard = strip_info->sx_count; - strip_info->rx_errors++; - } - - /* Leading control characters (CR, NL, Tab, etc.) are ignored */ - if (strip_info->sx_count > 0 || *cp >= ' ') { - if (*cp == 0x0D) { /* If end of packet, decide what to do with it */ - if (strip_info->sx_count > 3000) - printk(KERN_INFO - "%s: Cut a %d byte packet (%zd bytes remaining)%s\n", - strip_info->dev->name, - strip_info->sx_count, - end - cp - 1, - strip_info-> - discard ? " (discarded)" : - ""); - if (strip_info->sx_count > - strip_info->sx_size) { - strip_info->rx_over_errors++; - printk(KERN_INFO - "%s: sx_buff overflow (%d bytes total)\n", - strip_info->dev->name, - strip_info->sx_count); - } else if (strip_info->discard) - printk(KERN_INFO - "%s: Discarding bad packet (%d/%d)\n", - strip_info->dev->name, - strip_info->discard, - strip_info->sx_count); - else - process_message(strip_info); - strip_info->discard = 0; - strip_info->sx_count = 0; - } else { - /* Make sure we have space in the buffer */ - if (strip_info->sx_count < - strip_info->sx_size) - strip_info->sx_buff[strip_info-> - sx_count] = - *cp; - strip_info->sx_count++; - } - } - cp++; - } - spin_unlock_bh(&strip_lock); -} - - -/************************************************************************/ -/* General control routines */ - -static int set_mac_address(struct strip *strip_info, - MetricomAddress * addr) -{ - /* - * We're using a manually specified address if the address is set - * to anything other than all ones. Setting the address to all ones - * disables manual mode and goes back to automatic address determination - * (tracking the true address that the radio has). - */ - strip_info->manual_dev_addr = - memcmp(addr->c, broadcast_address.c, - sizeof(broadcast_address)); - if (strip_info->manual_dev_addr) - *(MetricomAddress *) strip_info->dev->dev_addr = *addr; - else - *(MetricomAddress *) strip_info->dev->dev_addr = - strip_info->true_dev_addr; - return 0; -} - -static int strip_set_mac_address(struct net_device *dev, void *addr) -{ - struct strip *strip_info = netdev_priv(dev); - struct sockaddr *sa = addr; - printk(KERN_INFO "%s: strip_set_dev_mac_address called\n", dev->name); - set_mac_address(strip_info, (MetricomAddress *) sa->sa_data); - return 0; -} - -static struct net_device_stats *strip_get_stats(struct net_device *dev) -{ - struct strip *strip_info = netdev_priv(dev); - static struct net_device_stats stats; - - memset(&stats, 0, sizeof(struct net_device_stats)); - - stats.rx_packets = strip_info->rx_packets; - stats.tx_packets = strip_info->tx_packets; - stats.rx_dropped = strip_info->rx_dropped; - stats.tx_dropped = strip_info->tx_dropped; - stats.tx_errors = strip_info->tx_errors; - stats.rx_errors = strip_info->rx_errors; - stats.rx_over_errors = strip_info->rx_over_errors; - return (&stats); -} - - -/************************************************************************/ -/* Opening and closing */ - -/* - * Here's the order things happen: - * When the user runs "slattach -p strip ..." - * 1. The TTY module calls strip_open;; - * 2. strip_open calls strip_alloc - * 3. strip_alloc calls register_netdev - * 4. register_netdev calls strip_dev_init - * 5. then strip_open finishes setting up the strip_info - * - * When the user runs "ifconfig st<x> up address netmask ..." - * 6. strip_open_low gets called - * - * When the user runs "ifconfig st<x> down" - * 7. strip_close_low gets called - * - * When the user kills the slattach process - * 8. strip_close gets called - * 9. strip_close calls dev_close - * 10. if the device is still up, then dev_close calls strip_close_low - * 11. strip_close calls strip_free - */ - -/* Open the low-level part of the STRIP channel. Easy! */ - -static int strip_open_low(struct net_device *dev) -{ - struct strip *strip_info = netdev_priv(dev); - - if (strip_info->tty == NULL) - return (-ENODEV); - - if (!allocate_buffers(strip_info, dev->mtu)) - return (-ENOMEM); - - strip_info->sx_count = 0; - strip_info->tx_left = 0; - - strip_info->discard = 0; - strip_info->working = FALSE; - strip_info->firmware_level = NoStructure; - strip_info->next_command = CompatibilityCommand; - strip_info->user_baud = tty_get_baud_rate(strip_info->tty); - - printk(KERN_INFO "%s: Initializing Radio.\n", - strip_info->dev->name); - ResetRadio(strip_info); - strip_info->idle_timer.expires = jiffies + 1 * HZ; - add_timer(&strip_info->idle_timer); - netif_wake_queue(dev); - return (0); -} - - -/* - * Close the low-level part of the STRIP channel. Easy! - */ - -static int strip_close_low(struct net_device *dev) -{ - struct strip *strip_info = netdev_priv(dev); - - if (strip_info->tty == NULL) - return -EBUSY; - strip_info->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); - - netif_stop_queue(dev); - - /* - * Free all STRIP frame buffers. - */ - kfree(strip_info->rx_buff); - strip_info->rx_buff = NULL; - kfree(strip_info->sx_buff); - strip_info->sx_buff = NULL; - kfree(strip_info->tx_buff); - strip_info->tx_buff = NULL; - - del_timer(&strip_info->idle_timer); - return 0; -} - -static const struct header_ops strip_header_ops = { - .create = strip_header, - .rebuild = strip_rebuild_header, -}; - -/* - * This routine is called by DDI when the - * (dynamically assigned) device is registered - */ - -static void strip_dev_setup(struct net_device *dev) -{ - /* - * Finish setting up the DEVICE info. - */ - - dev->trans_start = 0; - dev->last_rx = 0; - dev->tx_queue_len = 30; /* Drop after 30 frames queued */ - - dev->flags = 0; - dev->mtu = DEFAULT_STRIP_MTU; - dev->type = ARPHRD_METRICOM; /* dtang */ - dev->hard_header_len = sizeof(STRIP_Header); - /* - * dev->priv Already holds a pointer to our struct strip - */ - - *(MetricomAddress *) & dev->broadcast = broadcast_address; - dev->dev_addr[0] = 0; - dev->addr_len = sizeof(MetricomAddress); - - /* - * Pointers to interface service routines. - */ - - dev->open = strip_open_low; - dev->stop = strip_close_low; - dev->hard_start_xmit = strip_xmit; - dev->header_ops = &strip_header_ops; - - dev->set_mac_address = strip_set_mac_address; - dev->get_stats = strip_get_stats; - dev->change_mtu = strip_change_mtu; -} - -/* - * Free a STRIP channel. - */ - -static void strip_free(struct strip *strip_info) -{ - spin_lock_bh(&strip_lock); - list_del_rcu(&strip_info->list); - spin_unlock_bh(&strip_lock); - - strip_info->magic = 0; - - free_netdev(strip_info->dev); -} - - -/* - * Allocate a new free STRIP channel - */ -static struct strip *strip_alloc(void) -{ - struct list_head *n; - struct net_device *dev; - struct strip *strip_info; - - dev = alloc_netdev(sizeof(struct strip), "st%d", - strip_dev_setup); - - if (!dev) - return NULL; /* If no more memory, return */ - - - strip_info = netdev_priv(dev); - strip_info->dev = dev; - - strip_info->magic = STRIP_MAGIC; - strip_info->tty = NULL; - - strip_info->gratuitous_arp = jiffies + LongTime; - strip_info->arp_interval = 0; - init_timer(&strip_info->idle_timer); - strip_info->idle_timer.data = (long) dev; - strip_info->idle_timer.function = strip_IdleTask; - - - spin_lock_bh(&strip_lock); - rescan: - /* - * Search the list to find where to put our new entry - * (and in the process decide what channel number it is - * going to be) - */ - list_for_each(n, &strip_list) { - struct strip *s = hlist_entry(n, struct strip, list); - - if (s->dev->base_addr == dev->base_addr) { - ++dev->base_addr; - goto rescan; - } - } - - sprintf(dev->name, "st%ld", dev->base_addr); - - list_add_tail_rcu(&strip_info->list, &strip_list); - spin_unlock_bh(&strip_lock); - - return strip_info; -} - -/* - * Open the high-level part of the STRIP channel. - * This function is called by the TTY module when the - * STRIP line discipline is called for. Because we are - * sure the tty line exists, we only have to link it to - * a free STRIP channel... - */ - -static int strip_open(struct tty_struct *tty) -{ - struct strip *strip_info = (struct strip *) tty->disc_data; - - /* - * First make sure we're not already connected. - */ - - if (strip_info && strip_info->magic == STRIP_MAGIC) - return -EEXIST; - - /* - * We need a write method. - */ - - if (tty->ops->write == NULL || tty->ops->set_termios == NULL) - return -EOPNOTSUPP; - - /* - * OK. Find a free STRIP channel to use. - */ - if ((strip_info = strip_alloc()) == NULL) - return -ENFILE; - - /* - * Register our newly created device so it can be ifconfig'd - * strip_dev_init() will be called as a side-effect - */ - - if (register_netdev(strip_info->dev) != 0) { - printk(KERN_ERR "strip: register_netdev() failed.\n"); - strip_free(strip_info); - return -ENFILE; - } - - strip_info->tty = tty; - tty->disc_data = strip_info; - tty->receive_room = 65536; - - tty_driver_flush_buffer(tty); - - /* - * Restore default settings - */ - - strip_info->dev->type = ARPHRD_METRICOM; /* dtang */ - - /* - * Set tty options - */ - - tty->termios->c_iflag |= IGNBRK | IGNPAR; /* Ignore breaks and parity errors. */ - tty->termios->c_cflag |= CLOCAL; /* Ignore modem control signals. */ - tty->termios->c_cflag &= ~HUPCL; /* Don't close on hup */ - - printk(KERN_INFO "STRIP: device \"%s\" activated\n", - strip_info->dev->name); - - /* - * Done. We have linked the TTY line to a channel. - */ - return (strip_info->dev->base_addr); -} - -/* - * Close down a STRIP channel. - * This means flushing out any pending queues, and then restoring the - * TTY line discipline to what it was before it got hooked to STRIP - * (which usually is TTY again). - */ - -static void strip_close(struct tty_struct *tty) -{ - struct strip *strip_info = (struct strip *) tty->disc_data; - - /* - * First make sure we're connected. - */ - - if (!strip_info || strip_info->magic != STRIP_MAGIC) - return; - - unregister_netdev(strip_info->dev); - - tty->disc_data = NULL; - strip_info->tty = NULL; - printk(KERN_INFO "STRIP: device \"%s\" closed down\n", - strip_info->dev->name); - strip_free(strip_info); - tty->disc_data = NULL; -} - - -/************************************************************************/ -/* Perform I/O control calls on an active STRIP channel. */ - -static int strip_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct strip *strip_info = (struct strip *) tty->disc_data; - - /* - * First make sure we're connected. - */ - - if (!strip_info || strip_info->magic != STRIP_MAGIC) - return -EINVAL; - - switch (cmd) { - case SIOCGIFNAME: - if(copy_to_user((void __user *) arg, strip_info->dev->name, strlen(strip_info->dev->name) + 1)) - return -EFAULT; - break; - case SIOCSIFHWADDR: - { - MetricomAddress addr; - //printk(KERN_INFO "%s: SIOCSIFHWADDR\n", strip_info->dev->name); - if(copy_from_user(&addr, (void __user *) arg, sizeof(MetricomAddress))) - return -EFAULT; - return set_mac_address(strip_info, &addr); - } - default: - return tty_mode_ioctl(tty, file, cmd, arg); - break; - } - return 0; -} - - -/************************************************************************/ -/* Initialization */ - -static struct tty_ldisc strip_ldisc = { - .magic = TTY_LDISC_MAGIC, - .name = "strip", - .owner = THIS_MODULE, - .open = strip_open, - .close = strip_close, - .ioctl = strip_ioctl, - .receive_buf = strip_receive_buf, - .write_wakeup = strip_write_some_more, -}; - -/* - * Initialize the STRIP driver. - * This routine is called at boot time, to bootstrap the multi-channel - * STRIP driver - */ - -static char signon[] __initdata = - KERN_INFO "STRIP: Version %s (unlimited channels)\n"; - -static int __init strip_init_driver(void) -{ - int status; - - printk(signon, StripVersion); - - - /* - * Fill in our line protocol discipline, and register it - */ - if ((status = tty_register_ldisc(N_STRIP, &strip_ldisc))) - printk(KERN_ERR "STRIP: can't register line discipline (err = %d)\n", - status); - - /* - * Register the status file with /proc - */ - proc_net_fops_create(&init_net, "strip", S_IFREG | S_IRUGO, &strip_seq_fops); - - return status; -} - -module_init(strip_init_driver); - -static const char signoff[] __exitdata = - KERN_INFO "STRIP: Module Unloaded\n"; - -static void __exit strip_exit_driver(void) -{ - int i; - struct list_head *p,*n; - - /* module ref count rules assure that all entries are unregistered */ - list_for_each_safe(p, n, &strip_list) { - struct strip *s = list_entry(p, struct strip, list); - strip_free(s); - } - - /* Unregister with the /proc/net file here. */ - proc_net_remove(&init_net, "strip"); - - if ((i = tty_unregister_ldisc(N_STRIP))) - printk(KERN_ERR "STRIP: can't unregister line discipline (err = %d)\n", i); - - printk(signoff); -} - -module_exit(strip_exit_driver); - -MODULE_AUTHOR("Stuart Cheshire <cheshire@cs.stanford.edu>"); -MODULE_DESCRIPTION("Starmode Radio IP (STRIP) Device Driver"); -MODULE_LICENSE("Dual BSD/GPL"); - -MODULE_SUPPORTED_DEVICE("Starmode Radio IP (STRIP) modem"); diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 42a36b3f3ff..377141995e3 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1624,25 +1624,25 @@ static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(current_ev, + current_ev = iwe_stream_add_event(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_ADDR_LEN); iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; iwe.u.data.length = this->bss_set[i].ssid.el.len; - current_ev = iwe_stream_add_point(current_ev, + current_ev = iwe_stream_add_point(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, this->bss_set[i].ssid.essid); iwe.cmd = SIOCGIWMODE; iwe.u.mode = this->bss_set[i].bss_type; - current_ev = iwe_stream_add_event(current_ev, + current_ev = iwe_stream_add_event(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_UINT_LEN); iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = this->bss_set[i].ds_pset.chan; iwe.u.freq.e = 0; - current_ev = iwe_stream_add_event(current_ev, + current_ev = iwe_stream_add_event(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN); iwe.cmd = SIOCGIWENCODE; @@ -1651,7 +1651,7 @@ static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, + current_ev = iwe_stream_add_point(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, NULL); } diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index d5c0c66188c..07e4d1f7320 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -1152,32 +1152,36 @@ static int zd1201_get_scan(struct net_device *dev, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, zd->rxdata+i+6, 6); - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_ADDR_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_ADDR_LEN); iwe.cmd = SIOCGIWESSID; iwe.u.data.length = zd->rxdata[i+16]; iwe.u.data.flags = 1; - cev = iwe_stream_add_point(cev, end_buf, &iwe, zd->rxdata+i+18); + cev = iwe_stream_add_point(info, cev, end_buf, + &iwe, zd->rxdata+i+18); iwe.cmd = SIOCGIWMODE; if (zd->rxdata[i+14]&0x01) iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_UINT_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_UINT_LEN); iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = zd->rxdata[i+0]; iwe.u.freq.e = 0; - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_FREQ_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_FREQ_LEN); iwe.cmd = SIOCGIWRATE; iwe.u.bitrate.fixed = 0; iwe.u.bitrate.disabled = 0; for (j=0; j<10; j++) if (zd->rxdata[i+50+j]) { iwe.u.bitrate.value = (zd->rxdata[i+50+j]&0x7f)*500000; - cev=iwe_stream_add_event(cev, end_buf, &iwe, - IW_EV_PARAM_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_PARAM_LEN); } iwe.cmd = SIOCGIWENCODE; @@ -1186,14 +1190,15 @@ static int zd1201_get_scan(struct net_device *dev, iwe.u.data.flags = IW_ENCODE_ENABLED; else iwe.u.data.flags = IW_ENCODE_DISABLED; - cev = iwe_stream_add_point(cev, end_buf, &iwe, NULL); + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, NULL); iwe.cmd = IWEVQUAL; iwe.u.qual.qual = zd->rxdata[i+4]; iwe.u.qual.noise= zd->rxdata[i+2]/10-100; iwe.u.qual.level = (256+zd->rxdata[i+4]*100)/255-100; iwe.u.qual.updated = 7; - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_QUAL_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_QUAL_LEN); } if (!enabled_save) diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 6d86b365f15..317c5e24f80 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -376,8 +376,6 @@ static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length) static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, struct ieee80211_hdr *header, u32 flags) { - u16 fctl = le16_to_cpu(header->frame_control); - /* * CONTROL TODO: * - if backoff needed, enable bit 0 @@ -395,8 +393,7 @@ static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, cs->control |= ZD_CS_MULTICAST; /* PS-POLL */ - if ((fctl & (IEEE80211_FCTL_FTYPE|IEEE80211_FCTL_STYPE)) == - (IEEE80211_FTYPE_CTL|IEEE80211_STYPE_PSPOLL)) + if (ieee80211_is_pspoll(header->frame_control)) cs->control |= ZD_CS_PS_POLL_FRAME; if (flags & IEEE80211_TX_CTL_USE_RTS_CTS) @@ -550,13 +547,11 @@ static int zd_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, struct ieee80211_rx_status *stats) { - u16 fc = le16_to_cpu(rx_hdr->frame_control); struct sk_buff *skb; struct sk_buff_head *q; unsigned long flags; - if ((fc & (IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) != - (IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK)) + if (!ieee80211_is_ack(rx_hdr->frame_control)) return 0; q = &zd_hw_mac(hw)->ack_wait_queue; @@ -584,8 +579,8 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) const struct rx_status *status; struct sk_buff *skb; int bad_frame = 0; - u16 fc; - bool is_qos, is_4addr, need_padding; + __le16 fc; + int need_padding; int i; u8 rate; @@ -644,13 +639,8 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) && !mac->pass_ctrl) return 0; - fc = le16_to_cpu(*((__le16 *) buffer)); - - is_qos = ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) && - (fc & IEEE80211_STYPE_QOS_DATA); - is_4addr = (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == - (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS); - need_padding = is_qos ^ is_4addr; + fc = *(__le16 *)buffer; + need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc); skb = dev_alloc_skb(length + (need_padding ? 2 : 0)); if (skb == NULL) diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index cd845b8acd1..307b1f62d94 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -2,7 +2,7 @@ menu "Sonics Silicon Backplane" config SSB_POSSIBLE bool - depends on HAS_IOMEM + depends on HAS_IOMEM && HAS_DMA default y config SSB diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index d184f2aea78..d831a2beff3 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -462,18 +462,15 @@ static int ssb_devices_register(struct ssb_bus *bus) #ifdef CONFIG_SSB_PCIHOST sdev->irq = bus->host_pci->irq; dev->parent = &bus->host_pci->dev; - sdev->dma_dev = &bus->host_pci->dev; #endif break; case SSB_BUSTYPE_PCMCIA: #ifdef CONFIG_SSB_PCMCIAHOST sdev->irq = bus->host_pcmcia->irq.AssignedIRQ; dev->parent = &bus->host_pcmcia->dev; - sdev->dma_dev = &bus->host_pcmcia->dev; #endif break; case SSB_BUSTYPE_SSB: - sdev->dma_dev = dev; break; } @@ -1156,36 +1153,82 @@ u32 ssb_dma_translation(struct ssb_device *dev) { switch (dev->bus->bustype) { case SSB_BUSTYPE_SSB: - case SSB_BUSTYPE_PCMCIA: return 0; case SSB_BUSTYPE_PCI: return SSB_PCI_DMA; + default: + __ssb_dma_not_implemented(dev); } return 0; } EXPORT_SYMBOL(ssb_dma_translation); -int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask) +int ssb_dma_set_mask(struct ssb_device *dev, u64 mask) { - struct device *dma_dev = ssb_dev->dma_dev; - int err = 0; + int err; -#ifdef CONFIG_SSB_PCIHOST - if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI) { - err = pci_set_dma_mask(ssb_dev->bus->host_pci, mask); + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + err = pci_set_dma_mask(dev->bus->host_pci, mask); if (err) return err; - err = pci_set_consistent_dma_mask(ssb_dev->bus->host_pci, mask); + err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask); return err; + case SSB_BUSTYPE_SSB: + return dma_set_mask(dev->dev, mask); + default: + __ssb_dma_not_implemented(dev); } -#endif - dma_dev->coherent_dma_mask = mask; - dma_dev->dma_mask = &dma_dev->coherent_dma_mask; - - return err; + return -ENOSYS; } EXPORT_SYMBOL(ssb_dma_set_mask); +void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp_flags) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + if (gfp_flags & GFP_DMA) { + /* Workaround: The PCI API does not support passing + * a GFP flag. */ + return dma_alloc_coherent(&dev->bus->host_pci->dev, + size, dma_handle, gfp_flags); + } + return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle); + case SSB_BUSTYPE_SSB: + return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags); + default: + __ssb_dma_not_implemented(dev); + } + return NULL; +} +EXPORT_SYMBOL(ssb_dma_alloc_consistent); + +void ssb_dma_free_consistent(struct ssb_device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + gfp_t gfp_flags) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + if (gfp_flags & GFP_DMA) { + /* Workaround: The PCI API does not support passing + * a GFP flag. */ + dma_free_coherent(&dev->bus->host_pci->dev, + size, vaddr, dma_handle); + return; + } + pci_free_consistent(dev->bus->host_pci, size, + vaddr, dma_handle); + return; + case SSB_BUSTYPE_SSB: + dma_free_coherent(dev->dev, size, vaddr, dma_handle); + return; + default: + __ssb_dma_not_implemented(dev); + } +} +EXPORT_SYMBOL(ssb_dma_free_consistent); + int ssb_bus_may_powerdown(struct ssb_bus *bus) { struct ssb_chipcommon *cc; diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 97dba0d9234..05ec7eef869 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -58,7 +58,6 @@ #include <linux/syscalls.h> #include <linux/i2c.h> #include <linux/i2c-dev.h> -#include <linux/wireless.h> #include <linux/atalk.h> #include <linux/loop.h> @@ -1757,64 +1756,6 @@ static int do_i2c_smbus_ioctl(unsigned int fd, unsigned int cmd, unsigned long a return sys_ioctl(fd, cmd, (unsigned long)tdata); } -struct compat_iw_point { - compat_caddr_t pointer; - __u16 length; - __u16 flags; -}; - -static int do_wireless_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - struct iwreq __user *iwr; - struct iwreq __user *iwr_u; - struct iw_point __user *iwp; - struct compat_iw_point __user *iwp_u; - compat_caddr_t pointer_u; - void __user *pointer; - __u16 length, flags; - int ret; - - iwr_u = compat_ptr(arg); - iwp_u = (struct compat_iw_point __user *) &iwr_u->u.data; - iwr = compat_alloc_user_space(sizeof(*iwr)); - if (iwr == NULL) - return -ENOMEM; - - iwp = &iwr->u.data; - - if (!access_ok(VERIFY_WRITE, iwr, sizeof(*iwr))) - return -EFAULT; - - if (__copy_in_user(&iwr->ifr_ifrn.ifrn_name[0], - &iwr_u->ifr_ifrn.ifrn_name[0], - sizeof(iwr->ifr_ifrn.ifrn_name))) - return -EFAULT; - - if (__get_user(pointer_u, &iwp_u->pointer) || - __get_user(length, &iwp_u->length) || - __get_user(flags, &iwp_u->flags)) - return -EFAULT; - - if (__put_user(compat_ptr(pointer_u), &iwp->pointer) || - __put_user(length, &iwp->length) || - __put_user(flags, &iwp->flags)) - return -EFAULT; - - ret = sys_ioctl(fd, cmd, (unsigned long) iwr); - - if (__get_user(pointer, &iwp->pointer) || - __get_user(length, &iwp->length) || - __get_user(flags, &iwp->flags)) - return -EFAULT; - - if (__put_user(ptr_to_compat(pointer), &iwp_u->pointer) || - __put_user(length, &iwp_u->length) || - __put_user(flags, &iwp_u->flags)) - return -EFAULT; - - return ret; -} - /* Since old style bridge ioctl's endup using SIOCDEVPRIVATE * for some operations; this forces use of the newer bridge-utils that * use compatiable ioctls @@ -2495,36 +2436,6 @@ COMPATIBLE_IOCTL(I2C_TENBIT) COMPATIBLE_IOCTL(I2C_PEC) COMPATIBLE_IOCTL(I2C_RETRIES) COMPATIBLE_IOCTL(I2C_TIMEOUT) -/* wireless */ -COMPATIBLE_IOCTL(SIOCSIWCOMMIT) -COMPATIBLE_IOCTL(SIOCGIWNAME) -COMPATIBLE_IOCTL(SIOCSIWNWID) -COMPATIBLE_IOCTL(SIOCGIWNWID) -COMPATIBLE_IOCTL(SIOCSIWFREQ) -COMPATIBLE_IOCTL(SIOCGIWFREQ) -COMPATIBLE_IOCTL(SIOCSIWMODE) -COMPATIBLE_IOCTL(SIOCGIWMODE) -COMPATIBLE_IOCTL(SIOCSIWSENS) -COMPATIBLE_IOCTL(SIOCGIWSENS) -COMPATIBLE_IOCTL(SIOCSIWRANGE) -COMPATIBLE_IOCTL(SIOCSIWPRIV) -COMPATIBLE_IOCTL(SIOCSIWSTATS) -COMPATIBLE_IOCTL(SIOCSIWAP) -COMPATIBLE_IOCTL(SIOCGIWAP) -COMPATIBLE_IOCTL(SIOCSIWRATE) -COMPATIBLE_IOCTL(SIOCGIWRATE) -COMPATIBLE_IOCTL(SIOCSIWRTS) -COMPATIBLE_IOCTL(SIOCGIWRTS) -COMPATIBLE_IOCTL(SIOCSIWFRAG) -COMPATIBLE_IOCTL(SIOCGIWFRAG) -COMPATIBLE_IOCTL(SIOCSIWTXPOW) -COMPATIBLE_IOCTL(SIOCGIWTXPOW) -COMPATIBLE_IOCTL(SIOCSIWRETRY) -COMPATIBLE_IOCTL(SIOCGIWRETRY) -COMPATIBLE_IOCTL(SIOCSIWPOWER) -COMPATIBLE_IOCTL(SIOCGIWPOWER) -COMPATIBLE_IOCTL(SIOCSIWAUTH) -COMPATIBLE_IOCTL(SIOCGIWAUTH) /* hiddev */ COMPATIBLE_IOCTL(HIDIOCGVERSION) COMPATIBLE_IOCTL(HIDIOCAPPLICATION) @@ -2755,29 +2666,7 @@ COMPATIBLE_IOCTL(USBDEVFS_IOCTL32) HANDLE_IOCTL(I2C_FUNCS, w_long) HANDLE_IOCTL(I2C_RDWR, do_i2c_rdwr_ioctl) HANDLE_IOCTL(I2C_SMBUS, do_i2c_smbus_ioctl) -/* wireless */ -HANDLE_IOCTL(SIOCGIWRANGE, do_wireless_ioctl) -HANDLE_IOCTL(SIOCGIWPRIV, do_wireless_ioctl) -HANDLE_IOCTL(SIOCGIWSTATS, do_wireless_ioctl) -HANDLE_IOCTL(SIOCSIWSPY, do_wireless_ioctl) -HANDLE_IOCTL(SIOCGIWSPY, do_wireless_ioctl) -HANDLE_IOCTL(SIOCSIWTHRSPY, do_wireless_ioctl) -HANDLE_IOCTL(SIOCGIWTHRSPY, do_wireless_ioctl) -HANDLE_IOCTL(SIOCSIWMLME, do_wireless_ioctl) -HANDLE_IOCTL(SIOCGIWAPLIST, do_wireless_ioctl) -HANDLE_IOCTL(SIOCSIWSCAN, do_wireless_ioctl) -HANDLE_IOCTL(SIOCGIWSCAN, do_wireless_ioctl) -HANDLE_IOCTL(SIOCSIWESSID, do_wireless_ioctl) -HANDLE_IOCTL(SIOCGIWESSID, do_wireless_ioctl) -HANDLE_IOCTL(SIOCSIWNICKN, do_wireless_ioctl) -HANDLE_IOCTL(SIOCGIWNICKN, do_wireless_ioctl) -HANDLE_IOCTL(SIOCSIWENCODE, do_wireless_ioctl) -HANDLE_IOCTL(SIOCGIWENCODE, do_wireless_ioctl) -HANDLE_IOCTL(SIOCSIWGENIE, do_wireless_ioctl) -HANDLE_IOCTL(SIOCGIWGENIE, do_wireless_ioctl) -HANDLE_IOCTL(SIOCSIWENCODEEXT, do_wireless_ioctl) -HANDLE_IOCTL(SIOCGIWENCODEEXT, do_wireless_ioctl) -HANDLE_IOCTL(SIOCSIWPMKSA, do_wireless_ioctl) +/* bridge */ HANDLE_IOCTL(SIOCSIFBR, old_bridge_ioctl) HANDLE_IOCTL(SIOCGIFBR, old_bridge_ioctl) /* Not implemented in the native kernel */ diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 2998e3b5f16..cffd6d0094f 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -469,6 +469,40 @@ struct ieee80211s_hdr { u8 eaddr3[6]; } __attribute__ ((packed)); +/** + * struct ieee80211_quiet_ie + * + * This structure refers to "Quiet information element" + */ +struct ieee80211_quiet_ie { + u8 count; + u8 period; + __le16 duration; + __le16 offset; +} __attribute__ ((packed)); + +/** + * struct ieee80211_msrment_ie + * + * This structure refers to "Measurement Request/Report information element" + */ +struct ieee80211_msrment_ie { + u8 token; + u8 mode; + u8 type; + u8 request[0]; +} __attribute__ ((packed)); + +/** + * struct ieee80211_channel_sw_ie + * + * This structure refers to "Channel Switch Announcement information element" + */ +struct ieee80211_channel_sw_ie { + u8 mode; + u8 new_ch_num; + u8 count; +} __attribute__ ((packed)); struct ieee80211_mgmt { __le16 frame_control; @@ -544,13 +578,18 @@ struct ieee80211_mgmt { u8 action_code; u8 element_id; u8 length; - u8 switch_mode; - u8 new_chan; - u8 switch_count; + struct ieee80211_channel_sw_ie sw_elem; } __attribute__((packed)) chan_switch; struct{ u8 action_code; u8 dialog_token; + u8 element_id; + u8 length; + struct ieee80211_msrment_ie msr_elem; + } __attribute__((packed)) measurement; + struct{ + u8 action_code; + u8 dialog_token; __le16 capab; __le16 timeout; __le16 start_seq_num; @@ -700,11 +739,21 @@ struct ieee80211_ht_addt_info { #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5) #define WLAN_CAPABILITY_PBCC (1<<6) #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7) + /* 802.11h */ #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8) #define WLAN_CAPABILITY_QOS (1<<9) #define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) #define WLAN_CAPABILITY_DSSS_OFDM (1<<13) +/* measurement */ +#define IEEE80211_SPCT_MSR_RPRT_MODE_LATE (1<<0) +#define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE (1<<1) +#define IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED (1<<2) + +#define IEEE80211_SPCT_MSR_RPRT_TYPE_BASIC 0 +#define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA 1 +#define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI 2 + /* 802.11g ERP information element */ #define WLAN_ERP_NON_ERP_PRESENT (1<<0) @@ -875,6 +924,15 @@ enum ieee80211_category { WLAN_CATEGORY_WMM = 17, }; +/* SPECTRUM_MGMT action code */ +enum ieee80211_spectrum_mgmt_actioncode { + WLAN_ACTION_SPCT_MSR_REQ = 0, + WLAN_ACTION_SPCT_MSR_RPRT = 1, + WLAN_ACTION_SPCT_TPC_REQ = 2, + WLAN_ACTION_SPCT_TPC_RPRT = 3, + WLAN_ACTION_SPCT_CHL_SWITCH = 4, +}; + /* BACK action code */ enum ieee80211_back_actioncode { WLAN_ACTION_ADDBA_REQ = 0, diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index aa8411e2a16..2be7c63bc0f 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -241,7 +241,10 @@ enum nl80211_attrs { NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 }; -#define NL80211_MAX_SUPP_RATES 32 +#define NL80211_MAX_SUPP_RATES 32 +#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 +#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 +#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 /** * enum nl80211_iftype - (virtual) interface types diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index e3ab21d7fc7..c5f6e54ec6a 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -34,26 +34,37 @@ * RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. * RFKILL_TYPE_UWB: switch is on a ultra wideband device. * RFKILL_TYPE_WIMAX: switch is on a WiMAX device. + * RFKILL_TYPE_WWAN: switch is on a wireless WAN device. */ enum rfkill_type { RFKILL_TYPE_WLAN , RFKILL_TYPE_BLUETOOTH, RFKILL_TYPE_UWB, RFKILL_TYPE_WIMAX, + RFKILL_TYPE_WWAN, RFKILL_TYPE_MAX, }; enum rfkill_state { - RFKILL_STATE_OFF = 0, - RFKILL_STATE_ON = 1, + RFKILL_STATE_SOFT_BLOCKED = 0, /* Radio output blocked */ + RFKILL_STATE_UNBLOCKED = 1, /* Radio output allowed */ + RFKILL_STATE_HARD_BLOCKED = 2, /* Output blocked, non-overrideable */ }; +/* + * These are DEPRECATED, drivers using them should be verified to + * comply with the rfkill usage guidelines in Documentation/rfkill.txt + * and then converted to use the new names for rfkill_state + */ +#define RFKILL_STATE_OFF RFKILL_STATE_SOFT_BLOCKED +#define RFKILL_STATE_ON RFKILL_STATE_UNBLOCKED + /** * struct rfkill - rfkill control structure. * @name: Name of the switch. * @type: Radio type which the button controls, the value stored * here should be a value from enum rfkill_type. - * @state: State of the switch (on/off). + * @state: State of the switch, "UNBLOCKED" means radio can operate. * @user_claim_unsupported: Whether the hardware supports exclusive * RF-kill control by userspace. Set this before registering. * @user_claim: Set when the switch is controlled exlusively by userspace. @@ -61,6 +72,12 @@ enum rfkill_state { * @data: Pointer to the RF button drivers private data which will be * passed along when toggling radio state. * @toggle_radio(): Mandatory handler to control state of the radio. + * only RFKILL_STATE_SOFT_BLOCKED and RFKILL_STATE_UNBLOCKED are + * valid parameters. + * @get_state(): handler to read current radio state from hardware, + * may be called from atomic context, should return 0 on success. + * Either this handler OR judicious use of rfkill_force_state() is + * MANDATORY for any driver capable of RFKILL_STATE_HARD_BLOCKED. * @led_trigger: A LED trigger for this button's LED. * @dev: Device structure integrating the switch into device tree. * @node: Used to place switch into list of all switches known to the @@ -80,6 +97,7 @@ struct rfkill { void *data; int (*toggle_radio)(void *data, enum rfkill_state state); + int (*get_state)(void *data, enum rfkill_state *state); #ifdef CONFIG_RFKILL_LEDS struct led_trigger led_trigger; @@ -95,6 +113,21 @@ void rfkill_free(struct rfkill *rfkill); int rfkill_register(struct rfkill *rfkill); void rfkill_unregister(struct rfkill *rfkill); +int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state); + +/** + * rfkill_state_complement - return complementar state + * @state: state to return the complement of + * + * Returns RFKILL_STATE_SOFT_BLOCKED if @state is RFKILL_STATE_UNBLOCKED, + * returns RFKILL_STATE_UNBLOCKED otherwise. + */ +static inline enum rfkill_state rfkill_state_complement(enum rfkill_state state) +{ + return (state == RFKILL_STATE_UNBLOCKED) ? + RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED; +} + /** * rfkill_get_led_name - Get the LED trigger name for the button's LED. * This function might return a NULL pointer if registering of the @@ -110,4 +143,11 @@ static inline char *rfkill_get_led_name(struct rfkill *rfkill) #endif } +/* rfkill notification chain */ +#define RFKILL_STATE_CHANGED 0x0001 /* state of a normal rfkill + switch has changed */ + +int register_rfkill_notifier(struct notifier_block *nb); +int unregister_rfkill_notifier(struct notifier_block *nb); + #endif /* RFKILL_H */ diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 50dfd0dc409..0fe5a0ded3e 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -137,9 +137,6 @@ struct ssb_device { const struct ssb_bus_ops *ops; struct device *dev; - /* Pointer to the device that has to be used for - * any DMA related operation. */ - struct device *dma_dev; struct ssb_bus *bus; struct ssb_device_id id; @@ -399,13 +396,151 @@ static inline void ssb_block_write(struct ssb_device *dev, const void *buffer, #endif /* CONFIG_SSB_BLOCKIO */ +/* The SSB DMA API. Use this API for any DMA operation on the device. + * This API basically is a wrapper that calls the correct DMA API for + * the host device type the SSB device is attached to. */ + /* Translation (routing) bits that need to be ORed to DMA * addresses before they are given to a device. */ extern u32 ssb_dma_translation(struct ssb_device *dev); #define SSB_DMA_TRANSLATION_MASK 0xC0000000 #define SSB_DMA_TRANSLATION_SHIFT 30 -extern int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask); +extern int ssb_dma_set_mask(struct ssb_device *dev, u64 mask); + +extern void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp_flags); +extern void ssb_dma_free_consistent(struct ssb_device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + gfp_t gfp_flags); + +static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev) +{ +#ifdef CONFIG_SSB_DEBUG + printk(KERN_ERR "SSB: BUG! Calling DMA API for " + "unsupported bustype %d\n", dev->bus->bustype); +#endif /* DEBUG */ +} + +static inline int ssb_dma_mapping_error(struct ssb_device *dev, dma_addr_t addr) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + return pci_dma_mapping_error(addr); + case SSB_BUSTYPE_SSB: + return dma_mapping_error(addr); + default: + __ssb_dma_not_implemented(dev); + } + return -ENOSYS; +} + +static inline dma_addr_t ssb_dma_map_single(struct ssb_device *dev, void *p, + size_t size, enum dma_data_direction dir) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + return pci_map_single(dev->bus->host_pci, p, size, dir); + case SSB_BUSTYPE_SSB: + return dma_map_single(dev->dev, p, size, dir); + default: + __ssb_dma_not_implemented(dev); + } + return 0; +} + +static inline void ssb_dma_unmap_single(struct ssb_device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction dir) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + pci_unmap_single(dev->bus->host_pci, dma_addr, size, dir); + return; + case SSB_BUSTYPE_SSB: + dma_unmap_single(dev->dev, dma_addr, size, dir); + return; + default: + __ssb_dma_not_implemented(dev); + } +} + +static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev, + dma_addr_t dma_addr, + size_t size, + enum dma_data_direction dir) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr, + size, dir); + return; + case SSB_BUSTYPE_SSB: + dma_sync_single_for_cpu(dev->dev, dma_addr, size, dir); + return; + default: + __ssb_dma_not_implemented(dev); + } +} + +static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev, + dma_addr_t dma_addr, + size_t size, + enum dma_data_direction dir) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr, + size, dir); + return; + case SSB_BUSTYPE_SSB: + dma_sync_single_for_device(dev->dev, dma_addr, size, dir); + return; + default: + __ssb_dma_not_implemented(dev); + } +} + +static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev, + dma_addr_t dma_addr, + unsigned long offset, + size_t size, + enum dma_data_direction dir) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + /* Just sync everything. That's all the PCI API can do. */ + pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr, + offset + size, dir); + return; + case SSB_BUSTYPE_SSB: + dma_sync_single_range_for_cpu(dev->dev, dma_addr, offset, + size, dir); + return; + default: + __ssb_dma_not_implemented(dev); + } +} + +static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev, + dma_addr_t dma_addr, + unsigned long offset, + size_t size, + enum dma_data_direction dir) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + /* Just sync everything. That's all the PCI API can do. */ + pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr, + offset + size, dir); + return; + case SSB_BUSTYPE_SSB: + dma_sync_single_range_for_device(dev->dev, dma_addr, offset, + size, dir); + return; + default: + __ssb_dma_not_implemented(dev); + } +} #ifdef CONFIG_SSB_PCIHOST diff --git a/include/linux/wireless.h b/include/linux/wireless.h index 4a95a0e5eec..d7958f9b52c 100644 --- a/include/linux/wireless.h +++ b/include/linux/wireless.h @@ -677,6 +677,19 @@ struct iw_point __u16 flags; /* Optional params */ }; +#ifdef __KERNEL__ +#ifdef CONFIG_COMPAT + +#include <linux/compat.h> + +struct compat_iw_point { + compat_caddr_t pointer; + __u16 length; + __u16 flags; +}; +#endif +#endif + /* * A frequency * For numbers lower than 10^9, we encode the number in 'm' and @@ -1100,6 +1113,21 @@ struct iw_event #define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ IW_EV_POINT_OFF) +#ifdef __KERNEL__ +#ifdef CONFIG_COMPAT +struct __compat_iw_event { + __u16 len; /* Real length of this stuff */ + __u16 cmd; /* Wireless IOCTL */ + compat_caddr_t pointer; +}; +#define IW_EV_COMPAT_LCP_LEN offsetof(struct __compat_iw_event, pointer) +#define IW_EV_COMPAT_POINT_OFF offsetof(struct compat_iw_point, length) +#define IW_EV_COMPAT_POINT_LEN \ + (IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \ + IW_EV_COMPAT_POINT_OFF) +#endif +#endif + /* Size of the Event prefix when packed in stream */ #define IW_EV_LCP_PK_LEN (4) /* Size of the various events when packed in stream */ diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h index 369d50e08b9..51b9a37de99 100644 --- a/include/net/iw_handler.h +++ b/include/net/iw_handler.h @@ -256,7 +256,7 @@ #define EIWCOMMIT EINPROGRESS /* Flags available in struct iw_request_info */ -#define IW_REQUEST_FLAG_NONE 0x0000 /* No flag so far */ +#define IW_REQUEST_FLAG_COMPAT 0x0001 /* Compat ioctl call */ /* Type of headers we know about (basically union iwreq_data) */ #define IW_HEADER_TYPE_NULL 0 /* Not available */ @@ -478,105 +478,58 @@ extern void wireless_spy_update(struct net_device * dev, * Function that are so simple that it's more efficient inlining them */ -/*------------------------------------------------------------------*/ -/* - * Wrapper to add an Wireless Event to a stream of events. - */ -static inline char * -iwe_stream_add_event(char * stream, /* Stream of events */ - char * ends, /* End of stream */ - struct iw_event *iwe, /* Payload */ - int event_len) /* Real size of payload */ +static inline int iwe_stream_lcp_len(struct iw_request_info *info) { - /* Check if it's possible */ - if(likely((stream + event_len) < ends)) { - iwe->len = event_len; - /* Beware of alignement issues on 64 bits */ - memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN); - memcpy(stream + IW_EV_LCP_LEN, - ((char *) iwe) + IW_EV_LCP_LEN, - event_len - IW_EV_LCP_LEN); - stream += event_len; - } - return stream; +#ifdef CONFIG_COMPAT + if (info->flags & IW_REQUEST_FLAG_COMPAT) + return IW_EV_COMPAT_LCP_LEN; +#endif + return IW_EV_LCP_LEN; } -/*------------------------------------------------------------------*/ -/* - * Wrapper to add an short Wireless Event containing a pointer to a - * stream of events. - */ -static inline char * -iwe_stream_add_point(char * stream, /* Stream of events */ - char * ends, /* End of stream */ - struct iw_event *iwe, /* Payload length + flags */ - char * extra) /* More payload */ +static inline int iwe_stream_point_len(struct iw_request_info *info) { - int event_len = IW_EV_POINT_LEN + iwe->u.data.length; - /* Check if it's possible */ - if(likely((stream + event_len) < ends)) { - iwe->len = event_len; - memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN); - memcpy(stream + IW_EV_LCP_LEN, - ((char *) iwe) + IW_EV_LCP_LEN + IW_EV_POINT_OFF, - IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN); - memcpy(stream + IW_EV_POINT_LEN, extra, iwe->u.data.length); - stream += event_len; - } - return stream; +#ifdef CONFIG_COMPAT + if (info->flags & IW_REQUEST_FLAG_COMPAT) + return IW_EV_COMPAT_POINT_LEN; +#endif + return IW_EV_POINT_LEN; } -/*------------------------------------------------------------------*/ -/* - * Wrapper to add a value to a Wireless Event in a stream of events. - * Be careful, this one is tricky to use properly : - * At the first run, you need to have (value = event + IW_EV_LCP_LEN). - */ -static inline char * -iwe_stream_add_value(char * event, /* Event in the stream */ - char * value, /* Value in event */ - char * ends, /* End of stream */ - struct iw_event *iwe, /* Payload */ - int event_len) /* Real size of payload */ +static inline int iwe_stream_event_len_adjust(struct iw_request_info *info, + int event_len) { - /* Don't duplicate LCP */ - event_len -= IW_EV_LCP_LEN; - - /* Check if it's possible */ - if(likely((value + event_len) < ends)) { - /* Add new value */ - memcpy(value, (char *) iwe + IW_EV_LCP_LEN, event_len); - value += event_len; - /* Patch LCP */ - iwe->len = value - event; - memcpy(event, (char *) iwe, IW_EV_LCP_LEN); +#ifdef CONFIG_COMPAT + if (info->flags & IW_REQUEST_FLAG_COMPAT) { + event_len -= IW_EV_LCP_LEN; + event_len += IW_EV_COMPAT_LCP_LEN; } - return value; +#endif + + return event_len; } /*------------------------------------------------------------------*/ /* * Wrapper to add an Wireless Event to a stream of events. - * Same as above, with explicit error check... */ static inline char * -iwe_stream_check_add_event(char * stream, /* Stream of events */ - char * ends, /* End of stream */ - struct iw_event *iwe, /* Payload */ - int event_len, /* Size of payload */ - int * perr) /* Error report */ +iwe_stream_add_event(struct iw_request_info *info, char *stream, char *ends, + struct iw_event *iwe, int event_len) { - /* Check if it's possible, set error if not */ + int lcp_len = iwe_stream_lcp_len(info); + + event_len = iwe_stream_event_len_adjust(info, event_len); + + /* Check if it's possible */ if(likely((stream + event_len) < ends)) { iwe->len = event_len; /* Beware of alignement issues on 64 bits */ memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN); - memcpy(stream + IW_EV_LCP_LEN, - ((char *) iwe) + IW_EV_LCP_LEN, - event_len - IW_EV_LCP_LEN); + memcpy(stream + lcp_len, &iwe->u, + event_len - lcp_len); stream += event_len; - } else - *perr = -E2BIG; + } return stream; } @@ -584,27 +537,25 @@ iwe_stream_check_add_event(char * stream, /* Stream of events */ /* * Wrapper to add an short Wireless Event containing a pointer to a * stream of events. - * Same as above, with explicit error check... */ static inline char * -iwe_stream_check_add_point(char * stream, /* Stream of events */ - char * ends, /* End of stream */ - struct iw_event *iwe, /* Payload length + flags */ - char * extra, /* More payload */ - int * perr) /* Error report */ +iwe_stream_add_point(struct iw_request_info *info, char *stream, char *ends, + struct iw_event *iwe, char *extra) { - int event_len = IW_EV_POINT_LEN + iwe->u.data.length; + int event_len = iwe_stream_point_len(info) + iwe->u.data.length; + int point_len = iwe_stream_point_len(info); + int lcp_len = iwe_stream_lcp_len(info); + /* Check if it's possible */ if(likely((stream + event_len) < ends)) { iwe->len = event_len; memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN); - memcpy(stream + IW_EV_LCP_LEN, - ((char *) iwe) + IW_EV_LCP_LEN + IW_EV_POINT_OFF, + memcpy(stream + lcp_len, + ((char *) &iwe->u) + IW_EV_POINT_OFF, IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN); - memcpy(stream + IW_EV_POINT_LEN, extra, iwe->u.data.length); + memcpy(stream + point_len, extra, iwe->u.data.length); stream += event_len; - } else - *perr = -E2BIG; + } return stream; } @@ -613,29 +564,25 @@ iwe_stream_check_add_point(char * stream, /* Stream of events */ * Wrapper to add a value to a Wireless Event in a stream of events. * Be careful, this one is tricky to use properly : * At the first run, you need to have (value = event + IW_EV_LCP_LEN). - * Same as above, with explicit error check... */ static inline char * -iwe_stream_check_add_value(char * event, /* Event in the stream */ - char * value, /* Value in event */ - char * ends, /* End of stream */ - struct iw_event *iwe, /* Payload */ - int event_len, /* Size of payload */ - int * perr) /* Error report */ +iwe_stream_add_value(struct iw_request_info *info, char *event, char *value, + char *ends, struct iw_event *iwe, int event_len) { + int lcp_len = iwe_stream_lcp_len(info); + /* Don't duplicate LCP */ event_len -= IW_EV_LCP_LEN; /* Check if it's possible */ if(likely((value + event_len) < ends)) { /* Add new value */ - memcpy(value, (char *) iwe + IW_EV_LCP_LEN, event_len); + memcpy(value, &iwe->u, event_len); value += event_len; /* Patch LCP */ iwe->len = value - event; - memcpy(event, (char *) iwe, IW_EV_LCP_LEN); - } else - *perr = -E2BIG; + memcpy(event, (char *) iwe, lcp_len); + } return value; } diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7ab4ff6159a..02c79e6b309 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -595,7 +595,12 @@ enum ieee80211_key_flags { * @flags: key flags, see &enum ieee80211_key_flags. * @keyidx: the key index (0-3) * @keylen: key material length - * @key: key material + * @key: key material. For ALG_TKIP the key is encoded as a 256-bit (32 byte) + * data block: + * - Temporal Encryption Key (128 bits) + * - Temporal Authenticator Tx MIC Key (64 bits) + * - Temporal Authenticator Rx MIC Key (64 bits) + * */ struct ieee80211_key_conf { enum ieee80211_key_alg alg; @@ -733,8 +738,11 @@ enum ieee80211_hw_flags { * @conf: &struct ieee80211_conf, device configuration, don't use. * * @workqueue: single threaded workqueue available for driver use, - * allocated by mac80211 on registration and flushed on - * unregistration. + * allocated by mac80211 on registration and flushed when an + * interface is removed. + * NOTICE: All work performed on this workqueue should NEVER + * acquire the RTNL lock (i.e. Don't use the function + * ieee80211_iterate_active_interfaces()) * * @priv: pointer to private area that was allocated for driver use * along with this structure. diff --git a/include/net/wext.h b/include/net/wext.h index 80b31d826b7..6d76a39a9c5 100644 --- a/include/net/wext.h +++ b/include/net/wext.h @@ -12,6 +12,8 @@ extern int wext_proc_init(struct net *net); extern void wext_proc_exit(struct net *net); extern int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd, void __user *arg); +extern int compat_wext_handle_ioctl(struct net *net, unsigned int cmd, + unsigned long arg); #else static inline int wext_proc_init(struct net *net) { @@ -26,6 +28,11 @@ static inline int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned { return -EINVAL; } +static inline int compat_wext_handle_ioctl(struct net *net, unsigned int cmd, + unsigned long arg) +{ + return -EINVAL; +} #endif #endif /* __NET_WEXT_H */ diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index 822606b615c..973832dd7fa 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -43,8 +43,9 @@ static const char *ieee80211_modes[] = { #define MAX_CUSTOM_LEN 64 static char *ieee80211_translate_scan(struct ieee80211_device *ieee, - char *start, char *stop, - struct ieee80211_network *network) + char *start, char *stop, + struct ieee80211_network *network, + struct iw_request_info *info) { char custom[MAX_CUSTOM_LEN]; char *p; @@ -57,7 +58,7 @@ static char *ieee80211_translate_scan(struct ieee80211_device *ieee, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, network->bssid, ETH_ALEN); - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_ADDR_LEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_ADDR_LEN); /* Remaining entries will be displayed in the order we provide them */ @@ -66,17 +67,19 @@ static char *ieee80211_translate_scan(struct ieee80211_device *ieee, iwe.u.data.flags = 1; if (network->flags & NETWORK_EMPTY_ESSID) { iwe.u.data.length = sizeof("<hidden>"); - start = iwe_stream_add_point(start, stop, &iwe, "<hidden>"); + start = iwe_stream_add_point(info, start, stop, + &iwe, "<hidden>"); } else { iwe.u.data.length = min(network->ssid_len, (u8) 32); - start = iwe_stream_add_point(start, stop, &iwe, network->ssid); + start = iwe_stream_add_point(info, start, stop, + &iwe, network->ssid); } /* Add the protocol name */ iwe.cmd = SIOCGIWNAME; snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s", ieee80211_modes[network->mode]); - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_CHAR_LEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_CHAR_LEN); /* Add mode */ iwe.cmd = SIOCGIWMODE; @@ -86,7 +89,8 @@ static char *ieee80211_translate_scan(struct ieee80211_device *ieee, else iwe.u.mode = IW_MODE_ADHOC; - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_UINT_LEN); + start = iwe_stream_add_event(info, start, stop, + &iwe, IW_EV_UINT_LEN); } /* Add channel and frequency */ @@ -95,7 +99,7 @@ static char *ieee80211_translate_scan(struct ieee80211_device *ieee, iwe.u.freq.m = ieee80211_channel_to_freq(ieee, network->channel); iwe.u.freq.e = 6; iwe.u.freq.i = 0; - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_FREQ_LEN); /* Add encryption capability */ iwe.cmd = SIOCGIWENCODE; @@ -104,12 +108,13 @@ static char *ieee80211_translate_scan(struct ieee80211_device *ieee, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - start = iwe_stream_add_point(start, stop, &iwe, network->ssid); + start = iwe_stream_add_point(info, start, stop, + &iwe, network->ssid); /* Add basic and extended rates */ /* Rate : stuffing multiple values in a single event require a bit * more of magic - Jean II */ - current_val = start + IW_EV_LCP_LEN; + current_val = start + iwe_stream_lcp_len(info); iwe.cmd = SIOCGIWRATE; /* Those two flags are ignored... */ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; @@ -124,17 +129,19 @@ static char *ieee80211_translate_scan(struct ieee80211_device *ieee, /* Bit rate given in 500 kb/s units (+ 0x80) */ iwe.u.bitrate.value = ((rate & 0x7f) * 500000); /* Add new value to event */ - current_val = iwe_stream_add_value(start, current_val, stop, &iwe, IW_EV_PARAM_LEN); + current_val = iwe_stream_add_value(info, start, current_val, + stop, &iwe, IW_EV_PARAM_LEN); } for (; j < network->rates_ex_len; j++) { rate = network->rates_ex[j] & 0x7F; /* Bit rate given in 500 kb/s units (+ 0x80) */ iwe.u.bitrate.value = ((rate & 0x7f) * 500000); /* Add new value to event */ - current_val = iwe_stream_add_value(start, current_val, stop, &iwe, IW_EV_PARAM_LEN); + current_val = iwe_stream_add_value(info, start, current_val, + stop, &iwe, IW_EV_PARAM_LEN); } /* Check if we added any rate */ - if((current_val - start) > IW_EV_LCP_LEN) + if ((current_val - start) > iwe_stream_lcp_len(info)) start = current_val; /* Add quality statistics */ @@ -181,14 +188,14 @@ static char *ieee80211_translate_scan(struct ieee80211_device *ieee, iwe.u.qual.level = network->stats.signal; } - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_QUAL_LEN); iwe.cmd = IWEVCUSTOM; p = custom; iwe.u.data.length = p - custom; if (iwe.u.data.length) - start = iwe_stream_add_point(start, stop, &iwe, custom); + start = iwe_stream_add_point(info, start, stop, &iwe, custom); memset(&iwe, 0, sizeof(iwe)); if (network->wpa_ie_len) { @@ -196,7 +203,7 @@ static char *ieee80211_translate_scan(struct ieee80211_device *ieee, memcpy(buf, network->wpa_ie, network->wpa_ie_len); iwe.cmd = IWEVGENIE; iwe.u.data.length = network->wpa_ie_len; - start = iwe_stream_add_point(start, stop, &iwe, buf); + start = iwe_stream_add_point(info, start, stop, &iwe, buf); } memset(&iwe, 0, sizeof(iwe)); @@ -205,7 +212,7 @@ static char *ieee80211_translate_scan(struct ieee80211_device *ieee, memcpy(buf, network->rsn_ie, network->rsn_ie_len); iwe.cmd = IWEVGENIE; iwe.u.data.length = network->rsn_ie_len; - start = iwe_stream_add_point(start, stop, &iwe, buf); + start = iwe_stream_add_point(info, start, stop, &iwe, buf); } /* Add EXTRA: Age to display seconds since last beacon/probe response @@ -217,7 +224,7 @@ static char *ieee80211_translate_scan(struct ieee80211_device *ieee, jiffies_to_msecs(jiffies - network->last_scanned)); iwe.u.data.length = p - custom; if (iwe.u.data.length) - start = iwe_stream_add_point(start, stop, &iwe, custom); + start = iwe_stream_add_point(info, start, stop, &iwe, custom); /* Add spectrum management information */ iwe.cmd = -1; @@ -238,7 +245,7 @@ static char *ieee80211_translate_scan(struct ieee80211_device *ieee, if (iwe.cmd == IWEVCUSTOM) { iwe.u.data.length = p - custom; - start = iwe_stream_add_point(start, stop, &iwe, custom); + start = iwe_stream_add_point(info, start, stop, &iwe, custom); } return start; @@ -272,7 +279,8 @@ int ieee80211_wx_get_scan(struct ieee80211_device *ieee, if (ieee->scan_age == 0 || time_after(network->last_scanned + ieee->scan_age, jiffies)) - ev = ieee80211_translate_scan(ieee, ev, stop, network); + ev = ieee80211_translate_scan(ieee, ev, stop, network, + info); else IEEE80211_DEBUG_SCAN("Not showing network '%s (" "%s)' due to age (%dms).\n", diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 590e00b2766..0d3661d9b6a 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -150,7 +150,7 @@ config MAC80211_LOWTX_FRAME_DUMP If unsure, say N and insert the debugging code you require into the driver you are debugging. -config TKIP_DEBUG +config MAC80211_TKIP_DEBUG bool "TKIP debugging" depends on MAC80211_DEBUG diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 14fccf16b80..af352c05c98 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -24,6 +24,7 @@ #include <linux/spinlock.h> #include <linux/etherdevice.h> #include <net/wireless.h> +#include <net/iw_handler.h> #include "key.h" #include "sta_info.h" @@ -790,6 +791,10 @@ struct ieee802_11_elems { u8 *preq; u8 *prep; u8 *perr; + u8 *ch_switch_elem; + u8 *country_elem; + u8 *pwr_constr_elem; + u8 *quiet_elem; /* first quite element */ /* length of them, respectively */ u8 ssid_len; @@ -814,6 +819,11 @@ struct ieee802_11_elems { u8 preq_len; u8 prep_len; u8 perr_len; + u8 ch_switch_elem_len; + u8 country_elem_len; + u8 pwr_constr_elem_len; + u8 quiet_elem_len; + u8 num_of_quiet_elem; /* can be more the one */ }; static inline struct ieee80211_local *hw_to_local( @@ -867,7 +877,9 @@ int ieee80211_sta_set_bssid(struct net_device *dev, u8 *bssid); int ieee80211_sta_req_scan(struct net_device *dev, u8 *ssid, size_t ssid_len); void ieee80211_sta_req_auth(struct net_device *dev, struct ieee80211_if_sta *ifsta); -int ieee80211_sta_scan_results(struct net_device *dev, char *buf, size_t len); +int ieee80211_sta_scan_results(struct net_device *dev, + struct iw_request_info *info, + char *buf, size_t len); ieee80211_rx_result ieee80211_sta_rx_scan( struct net_device *dev, struct sk_buff *skb, struct ieee80211_rx_status *rx_status); diff --git a/net/mac80211/key.h b/net/mac80211/key.h index a0f774aafa4..425816e0996 100644 --- a/net/mac80211/key.h +++ b/net/mac80211/key.h @@ -16,31 +16,18 @@ #include <linux/rcupdate.h> #include <net/mac80211.h> -/* ALG_TKIP - * struct ieee80211_key::key is encoded as a 256-bit (32 byte) data block: - * Temporal Encryption Key (128 bits) - * Temporal Authenticator Tx MIC Key (64 bits) - * Temporal Authenticator Rx MIC Key (64 bits) - */ - -#define WEP_IV_LEN 4 -#define WEP_ICV_LEN 4 - -#define ALG_TKIP_KEY_LEN 32 -/* Starting offsets for each key */ -#define ALG_TKIP_TEMP_ENCR_KEY 0 -#define ALG_TKIP_TEMP_AUTH_TX_MIC_KEY 16 -#define ALG_TKIP_TEMP_AUTH_RX_MIC_KEY 24 -#define TKIP_IV_LEN 8 -#define TKIP_ICV_LEN 4 - -#define ALG_CCMP_KEY_LEN 16 -#define CCMP_HDR_LEN 8 -#define CCMP_MIC_LEN 8 -#define CCMP_TK_LEN 16 -#define CCMP_PN_LEN 6 - -#define NUM_RX_DATA_QUEUES 17 +#define WEP_IV_LEN 4 +#define WEP_ICV_LEN 4 +#define ALG_TKIP_KEY_LEN 32 +#define ALG_CCMP_KEY_LEN 16 +#define CCMP_HDR_LEN 8 +#define CCMP_MIC_LEN 8 +#define CCMP_TK_LEN 16 +#define CCMP_PN_LEN 6 +#define TKIP_IV_LEN 8 +#define TKIP_ICV_LEN 4 + +#define NUM_RX_DATA_QUEUES 17 struct ieee80211_local; struct ieee80211_sub_if_data; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 5c5396edad3..b661ee5bb82 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1691,7 +1691,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) list_add_tail(&sdata->list, &local->interfaces); name = wiphy_dev(local->hw.wiphy)->driver->name; - local->hw.workqueue = create_singlethread_workqueue(name); + local->hw.workqueue = create_freezeable_workqueue(name); if (!local->hw.workqueue) { result = -ENOMEM; goto fail_workqueue; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 55659a730dc..7b4d4d46843 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -204,6 +204,25 @@ void ieee802_11_parse_elems(u8 *start, size_t len, elems->perr = pos; elems->perr_len = elen; break; + case WLAN_EID_CHANNEL_SWITCH: + elems->ch_switch_elem = pos; + elems->ch_switch_elem_len = elen; + break; + case WLAN_EID_QUIET: + if (!elems->quiet_elem) { + elems->quiet_elem = pos; + elems->quiet_elem_len = elen; + } + elems->num_of_quiet_elem++; + break; + case WLAN_EID_COUNTRY: + elems->country_elem = pos; + elems->country_elem_len = elen; + break; + case WLAN_EID_PWR_CONSTRAINT: + elems->pwr_constr_elem = pos; + elems->pwr_constr_elem_len = elen; + break; default: break; } @@ -1701,6 +1720,71 @@ void ieee80211_sta_tear_down_BA_sessions(struct net_device *dev, u8 *addr) } } +static void ieee80211_send_refuse_measurement_request(struct net_device *dev, + struct ieee80211_msrment_ie *request_ie, + const u8 *da, const u8 *bssid, + u8 dialog_token) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct sk_buff *skb; + struct ieee80211_mgmt *msr_report; + + skb = dev_alloc_skb(sizeof(*msr_report) + local->hw.extra_tx_headroom + + sizeof(struct ieee80211_msrment_ie)); + + if (!skb) { + printk(KERN_ERR "%s: failed to allocate buffer for " + "measurement report frame\n", dev->name); + return; + } + + skb_reserve(skb, local->hw.extra_tx_headroom); + msr_report = (struct ieee80211_mgmt *)skb_put(skb, 24); + memset(msr_report, 0, 24); + memcpy(msr_report->da, da, ETH_ALEN); + memcpy(msr_report->sa, dev->dev_addr, ETH_ALEN); + memcpy(msr_report->bssid, bssid, ETH_ALEN); + msr_report->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT, + IEEE80211_STYPE_ACTION); + + skb_put(skb, 1 + sizeof(msr_report->u.action.u.measurement)); + msr_report->u.action.category = WLAN_CATEGORY_SPECTRUM_MGMT; + msr_report->u.action.u.measurement.action_code = + WLAN_ACTION_SPCT_MSR_RPRT; + msr_report->u.action.u.measurement.dialog_token = dialog_token; + + msr_report->u.action.u.measurement.element_id = WLAN_EID_MEASURE_REPORT; + msr_report->u.action.u.measurement.length = + sizeof(struct ieee80211_msrment_ie); + + memset(&msr_report->u.action.u.measurement.msr_elem, 0, + sizeof(struct ieee80211_msrment_ie)); + msr_report->u.action.u.measurement.msr_elem.token = request_ie->token; + msr_report->u.action.u.measurement.msr_elem.mode |= + IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED; + msr_report->u.action.u.measurement.msr_elem.type = request_ie->type; + + ieee80211_sta_tx(dev, skb, 0); +} + +static void ieee80211_sta_process_measurement_req(struct net_device *dev, + struct ieee80211_mgmt *mgmt, + size_t len) +{ + /* + * Ignoring measurement request is spec violation. + * Mandatory measurements must be reported optional + * measurements might be refused or reported incapable + * For now just refuse + * TODO: Answer basic measurement as unmeasured + */ + ieee80211_send_refuse_measurement_request(dev, + &mgmt->u.action.u.measurement.msr_elem, + mgmt->sa, mgmt->bssid, + mgmt->u.action.u.measurement.dialog_token); +} + + static void ieee80211_rx_mgmt_auth(struct net_device *dev, struct ieee80211_if_sta *ifsta, struct ieee80211_mgmt *mgmt, @@ -1753,11 +1837,12 @@ static void ieee80211_rx_mgmt_auth(struct net_device *dev, auth_transaction, status_code); if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { - /* IEEE 802.11 standard does not require authentication in IBSS + /* + * IEEE 802.11 standard does not require authentication in IBSS * networks and most implementations do not seem to use it. * However, try to reply to authentication attempts if someone * has actually implemented this. - * TODO: Could implement shared key authentication. */ + */ if (auth_alg != WLAN_AUTH_OPEN || auth_transaction != 1) { printk(KERN_DEBUG "%s: unexpected IBSS authentication " "frame (alg=%d transaction=%d)\n", @@ -3025,11 +3110,24 @@ static void ieee80211_rx_mgmt_action(struct net_device *dev, struct ieee80211_rx_status *rx_status) { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); if (len < IEEE80211_MIN_ACTION_SIZE) return; switch (mgmt->u.action.category) { + case WLAN_CATEGORY_SPECTRUM_MGMT: + if (local->hw.conf.channel->band != IEEE80211_BAND_5GHZ) + break; + switch (mgmt->u.action.u.chan_switch.action_code) { + case WLAN_ACTION_SPCT_MSR_REQ: + if (len < (IEEE80211_MIN_ACTION_SIZE + + sizeof(mgmt->u.action.u.measurement))) + break; + ieee80211_sta_process_measurement_req(dev, mgmt, len); + break; + } + break; case WLAN_CATEGORY_BACK: switch (mgmt->u.action.u.addba_req.action_code) { case WLAN_ACTION_ADDBA_REQ: @@ -3173,33 +3271,32 @@ ieee80211_sta_rx_scan(struct net_device *dev, struct sk_buff *skb, struct ieee80211_rx_status *rx_status) { struct ieee80211_mgmt *mgmt; - u16 fc; + __le16 fc; if (skb->len < 2) return RX_DROP_UNUSABLE; mgmt = (struct ieee80211_mgmt *) skb->data; - fc = le16_to_cpu(mgmt->frame_control); + fc = mgmt->frame_control; - if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) + if (ieee80211_is_ctl(fc)) return RX_CONTINUE; if (skb->len < 24) return RX_DROP_MONITOR; - if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) { - if ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP) { - ieee80211_rx_mgmt_probe_resp(dev, mgmt, - skb->len, rx_status); - dev_kfree_skb(skb); - return RX_QUEUED; - } else if ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON) { - ieee80211_rx_mgmt_beacon(dev, mgmt, skb->len, - rx_status); - dev_kfree_skb(skb); - return RX_QUEUED; - } + if (ieee80211_is_probe_resp(fc)) { + ieee80211_rx_mgmt_probe_resp(dev, mgmt, skb->len, rx_status); + dev_kfree_skb(skb); + return RX_QUEUED; } + + if (ieee80211_is_beacon(fc)) { + ieee80211_rx_mgmt_beacon(dev, mgmt, skb->len, rx_status); + dev_kfree_skb(skb); + return RX_QUEUED; + } + return RX_CONTINUE; } @@ -3777,7 +3874,7 @@ static void ieee80211_send_nullfunc(struct ieee80211_local *local, { struct sk_buff *skb; struct ieee80211_hdr *nullfunc; - u16 fc; + __le16 fc; skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24); if (!skb) { @@ -3789,11 +3886,11 @@ static void ieee80211_send_nullfunc(struct ieee80211_local *local, nullfunc = (struct ieee80211_hdr *) skb_put(skb, 24); memset(nullfunc, 0, 24); - fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | - IEEE80211_FCTL_TODS; + fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | + IEEE80211_FCTL_TODS); if (powersave) - fc |= IEEE80211_FCTL_PM; - nullfunc->frame_control = cpu_to_le16(fc); + fc |= cpu_to_le16(IEEE80211_FCTL_PM); + nullfunc->frame_control = fc; memcpy(nullfunc->addr1, sdata->u.sta.bssid, ETH_ALEN); memcpy(nullfunc->addr2, sdata->dev->dev_addr, ETH_ALEN); memcpy(nullfunc->addr3, sdata->u.sta.bssid, ETH_ALEN); @@ -4087,6 +4184,7 @@ int ieee80211_sta_req_scan(struct net_device *dev, u8 *ssid, size_t ssid_len) static char * ieee80211_sta_scan_result(struct net_device *dev, + struct iw_request_info *info, struct ieee80211_sta_bss *bss, char *current_ev, char *end_buf) { @@ -4101,7 +4199,7 @@ ieee80211_sta_scan_result(struct net_device *dev, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); memset(&iwe, 0, sizeof(iwe)); @@ -4109,13 +4207,13 @@ ieee80211_sta_scan_result(struct net_device *dev, if (bss_mesh_cfg(bss)) { iwe.u.data.length = bss_mesh_id_len(bss); iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, - bss_mesh_id(bss)); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss_mesh_id(bss)); } else { iwe.u.data.length = bss->ssid_len; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, - bss->ssid); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->ssid); } if (bss->capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS) @@ -4128,22 +4226,22 @@ ieee80211_sta_scan_result(struct net_device *dev, iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); } memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq); iwe.u.freq.e = 0; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = bss->freq; iwe.u.freq.e = 6; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVQUAL; @@ -4151,7 +4249,7 @@ ieee80211_sta_scan_result(struct net_device *dev, iwe.u.qual.level = bss->signal; iwe.u.qual.noise = bss->noise; iwe.u.qual.updated = local->wstats_flags; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); memset(&iwe, 0, sizeof(iwe)); @@ -4161,35 +4259,36 @@ ieee80211_sta_scan_result(struct net_device *dev, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ""); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, ""); if (bss && bss->wpa_ie) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->wpa_ie_len; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, - bss->wpa_ie); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->wpa_ie); } if (bss && bss->rsn_ie) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->rsn_ie_len; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, - bss->rsn_ie); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->rsn_ie); } if (bss && bss->ht_ie) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->ht_ie_len; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, - bss->ht_ie); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->ht_ie); } if (bss && bss->supp_rates_len > 0) { /* display all supported rates in readable format */ - char *p = current_ev + IW_EV_LCP_LEN; + char *p = current_ev + iwe_stream_lcp_len(info); int i; memset(&iwe, 0, sizeof(iwe)); @@ -4200,7 +4299,7 @@ ieee80211_sta_scan_result(struct net_device *dev, for (i = 0; i < bss->supp_rates_len; i++) { iwe.u.bitrate.value = ((bss->supp_rates[i] & 0x7f) * 500000); - p = iwe_stream_add_value(current_ev, p, + p = iwe_stream_add_value(info, current_ev, p, end_buf, &iwe, IW_EV_PARAM_LEN); } current_ev = p; @@ -4214,7 +4313,8 @@ ieee80211_sta_scan_result(struct net_device *dev, iwe.cmd = IWEVCUSTOM; sprintf(buf, "tsf=%016llx", (unsigned long long)(bss->timestamp)); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, buf); kfree(buf); } @@ -4229,31 +4329,36 @@ ieee80211_sta_scan_result(struct net_device *dev, iwe.cmd = IWEVCUSTOM; sprintf(buf, "Mesh network (version %d)", cfg[0]); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, buf); sprintf(buf, "Path Selection Protocol ID: " "0x%02X%02X%02X%02X", cfg[1], cfg[2], cfg[3], cfg[4]); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, buf); sprintf(buf, "Path Selection Metric ID: " "0x%02X%02X%02X%02X", cfg[5], cfg[6], cfg[7], cfg[8]); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, buf); sprintf(buf, "Congestion Control Mode ID: " "0x%02X%02X%02X%02X", cfg[9], cfg[10], cfg[11], cfg[12]); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, buf); sprintf(buf, "Channel Precedence: " "0x%02X%02X%02X%02X", cfg[13], cfg[14], cfg[15], cfg[16]); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, buf); kfree(buf); } @@ -4263,7 +4368,9 @@ ieee80211_sta_scan_result(struct net_device *dev, } -int ieee80211_sta_scan_results(struct net_device *dev, char *buf, size_t len) +int ieee80211_sta_scan_results(struct net_device *dev, + struct iw_request_info *info, + char *buf, size_t len) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); char *current_ev = buf; @@ -4276,8 +4383,8 @@ int ieee80211_sta_scan_results(struct net_device *dev, char *buf, size_t len) spin_unlock_bh(&local->sta_bss_lock); return -E2BIG; } - current_ev = ieee80211_sta_scan_result(dev, bss, current_ev, - end_buf); + current_ev = ieee80211_sta_scan_result(dev, info, bss, + current_ev, end_buf); } spin_unlock_bh(&local->sta_bss_lock); return current_ev - buf; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index c32a0bcd53b..8962d1355f0 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -61,7 +61,7 @@ static inline int should_drop_frame(struct ieee80211_rx_status *status, int present_fcs_len, int radiotap_len) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC)) return 1; @@ -2123,7 +2123,7 @@ static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local, struct tid_ampdu_rx *tid_agg_rx; u16 sc; u16 mpdu_seq_num; - u8 ret = 0, *qc; + u8 ret = 0; int tid; sta = sta_info_get(local, hdr->addr2); @@ -2135,8 +2135,7 @@ static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local, if (!ieee80211_is_data_qos(hdr->frame_control)) goto end_reorder; - qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & QOS_CONTROL_TID_MASK; + tid = *ieee80211_get_qos_ctl(hdr) & QOS_CONTROL_TID_MASK; if (sta->ampdu_mlme.tid_state_rx[tid] != HT_AGG_STATE_OPERATIONAL) goto end_reorder; diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index c24770cb02c..b3c733162fc 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -235,6 +235,7 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, return NULL; spin_lock_init(&sta->lock); + spin_lock_init(&sta->flaglock); memcpy(sta->addr, addr, ETH_ALEN); sta->local = local; diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 95753f860ac..fd228c198e3 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -164,6 +164,7 @@ struct sta_ampdu_mlme { * @aid: STA's unique AID (1..2007, 0 = not assigned yet), * only used in AP (and IBSS?) mode * @flags: STA flags, see &enum ieee80211_sta_info_flags + * @flaglock: spinlock for flags accesses * @ps_tx_buf: buffer of frames to transmit to this station * when it leaves power saving state * @tx_filtered: buffer of frames we already tried to transmit @@ -186,6 +187,7 @@ struct sta_info { struct rate_control_ref *rate_ctrl; void *rate_ctrl_priv; spinlock_t lock; + spinlock_t flaglock; struct ieee80211_ht_info ht_info; u64 supp_rates[IEEE80211_NUM_BANDS]; u8 addr[ETH_ALEN]; @@ -198,7 +200,10 @@ struct sta_info { */ u8 pin_status; - /* frequently updated information, locked with lock spinlock */ + /* + * frequently updated, locked with own spinlock (flaglock), + * use the accessors defined below + */ u32 flags; /* @@ -293,34 +298,41 @@ static inline enum plink_state sta_plink_state(struct sta_info *sta) static inline void set_sta_flags(struct sta_info *sta, const u32 flags) { - spin_lock_bh(&sta->lock); + unsigned long irqfl; + + spin_lock_irqsave(&sta->flaglock, irqfl); sta->flags |= flags; - spin_unlock_bh(&sta->lock); + spin_unlock_irqrestore(&sta->flaglock, irqfl); } static inline void clear_sta_flags(struct sta_info *sta, const u32 flags) { - spin_lock_bh(&sta->lock); + unsigned long irqfl; + + spin_lock_irqsave(&sta->flaglock, irqfl); sta->flags &= ~flags; - spin_unlock_bh(&sta->lock); + spin_unlock_irqrestore(&sta->flaglock, irqfl); } static inline void set_and_clear_sta_flags(struct sta_info *sta, const u32 set, const u32 clear) { - spin_lock_bh(&sta->lock); + unsigned long irqfl; + + spin_lock_irqsave(&sta->flaglock, irqfl); sta->flags |= set; sta->flags &= ~clear; - spin_unlock_bh(&sta->lock); + spin_unlock_irqrestore(&sta->flaglock, irqfl); } static inline u32 test_sta_flags(struct sta_info *sta, const u32 flags) { u32 ret; + unsigned long irqfl; - spin_lock_bh(&sta->lock); + spin_lock_irqsave(&sta->flaglock, irqfl); ret = sta->flags & flags; - spin_unlock_bh(&sta->lock); + spin_unlock_irqrestore(&sta->flaglock, irqfl); return ret; } @@ -329,11 +341,12 @@ static inline u32 test_and_clear_sta_flags(struct sta_info *sta, const u32 flags) { u32 ret; + unsigned long irqfl; - spin_lock_bh(&sta->lock); + spin_lock_irqsave(&sta->flaglock, irqfl); ret = sta->flags & flags; sta->flags &= ~flags; - spin_unlock_bh(&sta->lock); + spin_unlock_irqrestore(&sta->flaglock, irqfl); return ret; } @@ -341,10 +354,11 @@ static inline u32 test_and_clear_sta_flags(struct sta_info *sta, static inline u32 get_sta_flags(struct sta_info *sta) { u32 ret; + unsigned long irqfl; - spin_lock_bh(&sta->lock); + spin_lock_irqsave(&sta->flaglock, irqfl); ret = sta->flags; - spin_unlock_bh(&sta->lock); + spin_unlock_irqrestore(&sta->flaglock, irqfl); return ret; } diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c index e710243d82e..995f7af3d25 100644 --- a/net/mac80211/tkip.c +++ b/net/mac80211/tkip.c @@ -164,10 +164,10 @@ void ieee80211_get_tkip_key(struct ieee80211_key_conf *keyconf, iv16 = data[2] | (data[0] << 8); iv32 = get_unaligned_le32(&data[4]); - tk = &key->conf.key[ALG_TKIP_TEMP_ENCR_KEY]; + tk = &key->conf.key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY]; ctx = &key->u.tkip.tx; -#ifdef CONFIG_TKIP_DEBUG +#ifdef CONFIG_MAC80211_TKIP_DEBUG printk(KERN_DEBUG "TKIP encrypt: iv16 = 0x%04x, iv32 = 0x%08x\n", iv16, iv32); @@ -177,7 +177,7 @@ void ieee80211_get_tkip_key(struct ieee80211_key_conf *keyconf, printk(KERN_DEBUG "Wrap around of iv16 in the middle of a " "fragmented packet\n"); } -#endif /* CONFIG_TKIP_DEBUG */ +#endif /* Update the p1k only when the iv16 in the packet wraps around, this * might occur after the wrap around of iv16 in the key in case of @@ -205,7 +205,7 @@ void ieee80211_tkip_encrypt_data(struct crypto_blkcipher *tfm, { u8 rc4key[16]; struct tkip_ctx *ctx = &key->u.tkip.tx; - const u8 *tk = &key->conf.key[ALG_TKIP_TEMP_ENCR_KEY]; + const u8 *tk = &key->conf.key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY]; /* Calculate per-packet key */ if (ctx->iv16 == 0 || !ctx->initialized) @@ -231,7 +231,7 @@ int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm, u32 iv16; u8 rc4key[16], keyid, *pos = payload; int res; - const u8 *tk = &key->conf.key[ALG_TKIP_TEMP_ENCR_KEY]; + const u8 *tk = &key->conf.key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY]; if (payload_len < 12) return -1; @@ -240,7 +240,7 @@ int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm, keyid = pos[3]; iv32 = get_unaligned_le32(pos + 4); pos += 8; -#ifdef CONFIG_TKIP_DEBUG +#ifdef CONFIG_MAC80211_TKIP_DEBUG { int i; printk(KERN_DEBUG "TKIP decrypt: data(len=%zd)", payload_len); @@ -250,7 +250,7 @@ int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm, printk(KERN_DEBUG "TKIP decrypt: iv16=%04x iv32=%08x\n", iv16, iv32); } -#endif /* CONFIG_TKIP_DEBUG */ +#endif if (!(keyid & (1 << 5))) return TKIP_DECRYPT_NO_EXT_IV; @@ -262,14 +262,14 @@ int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm, (iv32 < key->u.tkip.rx[queue].iv32 || (iv32 == key->u.tkip.rx[queue].iv32 && iv16 <= key->u.tkip.rx[queue].iv16))) { -#ifdef CONFIG_TKIP_DEBUG +#ifdef CONFIG_MAC80211_TKIP_DEBUG DECLARE_MAC_BUF(mac); printk(KERN_DEBUG "TKIP replay detected for RX frame from " "%s (RX IV (%04x,%02x) <= prev. IV (%04x,%02x)\n", print_mac(mac, ta), iv32, iv16, key->u.tkip.rx[queue].iv32, key->u.tkip.rx[queue].iv16); -#endif /* CONFIG_TKIP_DEBUG */ +#endif return TKIP_DECRYPT_REPLAY; } @@ -283,23 +283,23 @@ int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm, key->u.tkip.rx[queue].iv32 != iv32) { /* IV16 wrapped around - perform TKIP phase 1 */ tkip_mixing_phase1(tk, &key->u.tkip.rx[queue], ta, iv32); -#ifdef CONFIG_TKIP_DEBUG +#ifdef CONFIG_MAC80211_TKIP_DEBUG { int i; + u8 key_offset = NL80211_TKIP_DATA_OFFSET_ENCR_KEY; DECLARE_MAC_BUF(mac); printk(KERN_DEBUG "TKIP decrypt: Phase1 TA=%s" " TK=", print_mac(mac, ta)); for (i = 0; i < 16; i++) printk("%02x ", - key->conf.key[ - ALG_TKIP_TEMP_ENCR_KEY + i]); + key->conf.key[key_offset + i]); printk("\n"); printk(KERN_DEBUG "TKIP decrypt: P1K="); for (i = 0; i < 5; i++) printk("%04x ", key->u.tkip.rx[queue].p1k[i]); printk("\n"); } -#endif /* CONFIG_TKIP_DEBUG */ +#endif if (key->local->ops->update_tkip_key && key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) { u8 bcast[ETH_ALEN] = @@ -316,7 +316,7 @@ int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm, } tkip_mixing_phase2(tk, &key->u.tkip.rx[queue], iv16, rc4key); -#ifdef CONFIG_TKIP_DEBUG +#ifdef CONFIG_MAC80211_TKIP_DEBUG { int i; printk(KERN_DEBUG "TKIP decrypt: Phase2 rc4key="); @@ -324,7 +324,7 @@ int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm, printk("%02x ", rc4key[i]); printk("\n"); } -#endif /* CONFIG_TKIP_DEBUG */ +#endif res = ieee80211_wep_decrypt_data(tfm, rc4key, 16, pos, payload_len - 12); done: diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index ce06e791bf4..52ab85c4341 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -52,9 +52,8 @@ static inline void ieee80211_include_sequence(struct ieee80211_sub_if_data *sdat static void ieee80211_dump_frame(const char *ifname, const char *title, const struct sk_buff *skb) { - const struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - u16 fc; - int hdrlen; + const struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + unsigned int hdrlen; DECLARE_MAC_BUF(mac); printk(KERN_DEBUG "%s: %s (len=%d)", ifname, title, skb->len); @@ -63,13 +62,12 @@ static void ieee80211_dump_frame(const char *ifname, const char *title, return; } - fc = le16_to_cpu(hdr->frame_control); - hdrlen = ieee80211_get_hdrlen(fc); + hdrlen = ieee80211_hdrlen(hdr->frame_control); if (hdrlen > skb->len) hdrlen = skb->len; if (hdrlen >= 4) printk(" FC=0x%04x DUR=0x%04x", - fc, le16_to_cpu(hdr->duration_id)); + le16_to_cpu(hdr->frame_control), le16_to_cpu(hdr->duration_id)); if (hdrlen >= 10) printk(" A1=%s", print_mac(mac, hdr->addr1)); if (hdrlen >= 16) @@ -87,8 +85,8 @@ static inline void ieee80211_dump_frame(const char *ifname, const char *title, } #endif /* CONFIG_MAC80211_LOWTX_FRAME_DUMP */ -static u16 ieee80211_duration(struct ieee80211_tx_data *tx, int group_addr, - int next_frag_len) +static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, int group_addr, + int next_frag_len) { int rate, mrate, erp, dur, i; struct ieee80211_rate *txrate; @@ -140,7 +138,7 @@ static u16 ieee80211_duration(struct ieee80211_tx_data *tx, int group_addr, /* data/mgmt */ if (0 /* FIX: data/mgmt during CFP */) - return 32768; + return cpu_to_le16(32768); if (group_addr) /* Group address as the destination - no ACK */ return 0; @@ -210,7 +208,7 @@ static u16 ieee80211_duration(struct ieee80211_tx_data *tx, int group_addr, tx->sdata->bss_conf.use_short_preamble); } - return dur; + return cpu_to_le16(dur); } static int inline is_ieee80211_device(struct net_device *dev, @@ -281,7 +279,7 @@ ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; - if (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control)) >= 24) + if (ieee80211_hdrlen(hdr->frame_control) >= 24) ieee80211_include_sequence(tx->sdata, hdr); return TX_CONTINUE; @@ -542,9 +540,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) static ieee80211_tx_result ieee80211_tx_h_misc(struct ieee80211_tx_data *tx) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) tx->skb->data; - u16 fc = le16_to_cpu(hdr->frame_control); - u16 dur; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); struct ieee80211_supported_band *sband; @@ -595,21 +591,13 @@ ieee80211_tx_h_misc(struct ieee80211_tx_data *tx) /* Transmit data frames using short preambles if the driver supports * short preambles at the selected rate and short preambles are * available on the network at the current point in time. */ - if (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) && + if (ieee80211_is_data(hdr->frame_control) && (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE) && tx->sdata->bss_conf.use_short_preamble && (!tx->sta || test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE))) { info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE; } - /* Setup duration field for the first fragment of the frame. Duration - * for remaining fragments will be updated when they are being sent - * to low-level driver in ieee80211_tx(). */ - dur = ieee80211_duration(tx, is_multicast_ether_addr(hdr->addr1), - (tx->flags & IEEE80211_TX_FRAGMENTED) ? - tx->extra_frag[0]->len : 0); - hdr->duration_id = cpu_to_le16(dur); - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) { struct ieee80211_rate *rate; @@ -647,7 +635,7 @@ ieee80211_tx_h_misc(struct ieee80211_tx_data *tx) static ieee80211_tx_result ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) tx->skb->data; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; size_t hdrlen, per_fragm, num_fragm, payload_len, left; struct sk_buff **frags, *first, *frag; int i; @@ -670,7 +658,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) first = tx->skb; - hdrlen = ieee80211_get_hdrlen(tx->fc); + hdrlen = ieee80211_hdrlen(hdr->frame_control); payload_len = first->len - hdrlen; per_fragm = frag_threshold - hdrlen - FCS_LEN; num_fragm = DIV_ROUND_UP(payload_len, per_fragm); @@ -711,6 +699,8 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) fhdr->seq_ctrl = cpu_to_le16(seq | ((i + 1) & IEEE80211_SCTL_FRAG)); copylen = left > per_fragm ? per_fragm : left; memcpy(skb_put(frag, copylen), pos, copylen); + memcpy(frag->cb, first->cb, sizeof(frag->cb)); + skb_copy_queue_mapping(frag, first); pos += copylen; left -= copylen; @@ -755,6 +745,36 @@ ieee80211_tx_h_encrypt(struct ieee80211_tx_data *tx) } static ieee80211_tx_result +ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data *tx) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; + int next_len, i; + int group_addr = is_multicast_ether_addr(hdr->addr1); + + if (!(tx->flags & IEEE80211_TX_FRAGMENTED)) { + hdr->duration_id = ieee80211_duration(tx, group_addr, 0); + return TX_CONTINUE; + } + + hdr->duration_id = ieee80211_duration(tx, group_addr, + tx->extra_frag[0]->len); + + for (i = 0; i < tx->num_extra_frag; i++) { + if (i + 1 < tx->num_extra_frag) { + next_len = tx->extra_frag[i + 1]->len; + } else { + next_len = 0; + tx->rate_idx = tx->last_frag_rate_idx; + } + + hdr = (struct ieee80211_hdr *)tx->extra_frag[i]->data; + hdr->duration_id = ieee80211_duration(tx, 0, next_len); + } + + return TX_CONTINUE; +} + +static ieee80211_tx_result ieee80211_tx_h_stats(struct ieee80211_tx_data *tx) { int i; @@ -788,6 +808,7 @@ static ieee80211_tx_handler ieee80211_tx_handlers[] = ieee80211_tx_h_fragment, /* handlers after fragment must be aware of tx info fragmentation! */ ieee80211_tx_h_encrypt, + ieee80211_tx_h_calculate_duration, ieee80211_tx_h_stats, NULL }; @@ -1083,13 +1104,46 @@ static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb, return IEEE80211_TX_OK; } +/* + * Invoke TX handlers, return 0 on success and non-zero if the + * frame was dropped or queued. + */ +static int invoke_tx_handlers(struct ieee80211_tx_data *tx) +{ + struct ieee80211_local *local = tx->local; + struct sk_buff *skb = tx->skb; + ieee80211_tx_handler *handler; + ieee80211_tx_result res = TX_DROP; + int i; + + for (handler = ieee80211_tx_handlers; *handler != NULL; handler++) { + res = (*handler)(tx); + if (res != TX_CONTINUE) + break; + } + + if (unlikely(res == TX_DROP)) { + I802_DEBUG_INC(local->tx_handlers_drop); + dev_kfree_skb(skb); + for (i = 0; i < tx->num_extra_frag; i++) + if (tx->extra_frag[i]) + dev_kfree_skb(tx->extra_frag[i]); + kfree(tx->extra_frag); + return -1; + } else if (unlikely(res == TX_QUEUED)) { + I802_DEBUG_INC(local->tx_handlers_queued); + return -1; + } + + return 0; +} + static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct sta_info *sta; - ieee80211_tx_handler *handler; struct ieee80211_tx_data tx; - ieee80211_tx_result res = TX_DROP, res_prepare; + ieee80211_tx_result res_prepare; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); int ret, i; u16 queue; @@ -1118,44 +1172,8 @@ static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb) tx.channel = local->hw.conf.channel; info->band = tx.channel->band; - for (handler = ieee80211_tx_handlers; *handler != NULL; - handler++) { - res = (*handler)(&tx); - if (res != TX_CONTINUE) - break; - } - - if (WARN_ON(tx.skb != skb)) - goto drop; - - if (unlikely(res == TX_DROP)) { - I802_DEBUG_INC(local->tx_handlers_drop); - goto drop; - } - - if (unlikely(res == TX_QUEUED)) { - I802_DEBUG_INC(local->tx_handlers_queued); - rcu_read_unlock(); - return 0; - } - - if (tx.extra_frag) { - for (i = 0; i < tx.num_extra_frag; i++) { - int next_len, dur; - struct ieee80211_hdr *hdr = - (struct ieee80211_hdr *) - tx.extra_frag[i]->data; - - if (i + 1 < tx.num_extra_frag) { - next_len = tx.extra_frag[i + 1]->len; - } else { - next_len = 0; - tx.rate_idx = tx.last_frag_rate_idx; - } - dur = ieee80211_duration(&tx, 0, next_len); - hdr->duration_id = cpu_to_le16(dur); - } - } + if (invoke_tx_handlers(&tx)) + goto out; retry: ret = __ieee80211_tx(local, skb, &tx); @@ -1198,6 +1216,7 @@ retry: store->last_frag_rate_ctrl_probe = !!(tx.flags & IEEE80211_TX_PROBE_LAST_FRAG); } + out: rcu_read_unlock(); return 0; @@ -1379,7 +1398,8 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, struct ieee80211_tx_info *info; struct ieee80211_sub_if_data *sdata; int ret = 1, head_need; - u16 ethertype, hdrlen, meshhdrlen = 0, fc; + u16 ethertype, hdrlen, meshhdrlen = 0; + __le16 fc; struct ieee80211_hdr hdr; struct ieee80211s_hdr mesh_hdr; const u8 *encaps_data; @@ -1402,12 +1422,12 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, /* convert Ethernet header to proper 802.11 header (based on * operation mode) */ ethertype = (skb->data[12] << 8) | skb->data[13]; - fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA; + fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); switch (sdata->vif.type) { case IEEE80211_IF_TYPE_AP: case IEEE80211_IF_TYPE_VLAN: - fc |= IEEE80211_FCTL_FROMDS; + fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); /* DA BSSID SA */ memcpy(hdr.addr1, skb->data, ETH_ALEN); memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); @@ -1415,7 +1435,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, hdrlen = 24; break; case IEEE80211_IF_TYPE_WDS: - fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS; + fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); /* RA TA DA SA */ memcpy(hdr.addr1, sdata->u.wds.remote_addr, ETH_ALEN); memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); @@ -1425,7 +1445,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, break; #ifdef CONFIG_MAC80211_MESH case IEEE80211_IF_TYPE_MESH_POINT: - fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS; + fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); /* RA TA DA SA */ if (is_multicast_ether_addr(skb->data)) memcpy(hdr.addr1, skb->data, ETH_ALEN); @@ -1455,7 +1475,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, break; #endif case IEEE80211_IF_TYPE_STA: - fc |= IEEE80211_FCTL_TODS; + fc |= cpu_to_le16(IEEE80211_FCTL_TODS); /* BSSID SA DA */ memcpy(hdr.addr1, sdata->u.sta.bssid, ETH_ALEN); memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); @@ -1490,7 +1510,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, /* receiver and we are QoS enabled, use a QoS type frame */ if (sta_flags & WLAN_STA_WME && ieee80211_num_regular_queues(&local->hw) >= 4) { - fc |= IEEE80211_STYPE_QOS_DATA; + fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); hdrlen += 2; } @@ -1518,7 +1538,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, goto fail; } - hdr.frame_control = cpu_to_le16(fc); + hdr.frame_control = fc; hdr.duration_id = 0; hdr.seq_ctrl = 0; @@ -1587,7 +1607,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, h_pos += meshhdrlen; } - if (fc & IEEE80211_STYPE_QOS_DATA) { + if (ieee80211_is_data_qos(fc)) { __le16 *qos_control; qos_control = (__le16*) skb_push(skb, 2); @@ -1845,8 +1865,8 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24 + sizeof(mgmt->u.beacon)); memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon)); - mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT, - IEEE80211_STYPE_BEACON); + mgmt->frame_control = + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); memset(mgmt->da, 0xff, ETH_ALEN); memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN); /* BSSID is left zeroed, wildcard value */ @@ -1914,10 +1934,9 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_rts *rts) { const struct ieee80211_hdr *hdr = frame; - u16 fctl; - fctl = IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS; - rts->frame_control = cpu_to_le16(fctl); + rts->frame_control = + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS); rts->duration = ieee80211_rts_duration(hw, vif, frame_len, frame_txctl); memcpy(rts->ra, hdr->addr1, sizeof(rts->ra)); @@ -1931,10 +1950,9 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_cts *cts) { const struct ieee80211_hdr *hdr = frame; - u16 fctl; - fctl = IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS; - cts->frame_control = cpu_to_le16(fctl); + cts->frame_control = + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS); cts->duration = ieee80211_ctstoself_duration(hw, vif, frame_len, frame_txctl); memcpy(cts->ra, hdr->addr1, sizeof(cts->ra)); @@ -1948,9 +1966,7 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_local *local = hw_to_local(hw); struct sk_buff *skb = NULL; struct sta_info *sta; - ieee80211_tx_handler *handler; struct ieee80211_tx_data tx; - ieee80211_tx_result res = TX_DROP; struct net_device *bdev; struct ieee80211_sub_if_data *sdata; struct ieee80211_if_ap *bss = NULL; @@ -2001,25 +2017,9 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, tx.channel = local->hw.conf.channel; info->band = tx.channel->band; - for (handler = ieee80211_tx_handlers; *handler != NULL; handler++) { - res = (*handler)(&tx); - if (res == TX_DROP || res == TX_QUEUED) - break; - } - - if (WARN_ON(tx.skb != skb)) - res = TX_DROP; - - if (res == TX_DROP) { - I802_DEBUG_INC(local->tx_handlers_drop); - dev_kfree_skb(skb); + if (invoke_tx_handlers(&tx)) skb = NULL; - } else if (res == TX_QUEUED) { - I802_DEBUG_INC(local->tx_handlers_queued); - skb = NULL; - } - -out: + out: rcu_read_unlock(); return skb; diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c index e7b6344c900..35b664d00e2 100644 --- a/net/mac80211/wep.c +++ b/net/mac80211/wep.c @@ -84,20 +84,17 @@ static u8 *ieee80211_wep_add_iv(struct ieee80211_local *local, struct sk_buff *skb, struct ieee80211_key *key) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - u16 fc; - int hdrlen; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + unsigned int hdrlen; u8 *newhdr; - fc = le16_to_cpu(hdr->frame_control); - fc |= IEEE80211_FCTL_PROTECTED; - hdr->frame_control = cpu_to_le16(fc); + hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); if (WARN_ON(skb_tailroom(skb) < WEP_ICV_LEN || skb_headroom(skb) < WEP_IV_LEN)) return NULL; - hdrlen = ieee80211_get_hdrlen(fc); + hdrlen = ieee80211_hdrlen(hdr->frame_control); newhdr = skb_push(skb, WEP_IV_LEN); memmove(newhdr, newhdr + WEP_IV_LEN, hdrlen); ieee80211_wep_get_iv(local, key, newhdr + hdrlen); @@ -109,12 +106,10 @@ static void ieee80211_wep_remove_iv(struct ieee80211_local *local, struct sk_buff *skb, struct ieee80211_key *key) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - u16 fc; - int hdrlen; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + unsigned int hdrlen; - fc = le16_to_cpu(hdr->frame_control); - hdrlen = ieee80211_get_hdrlen(fc); + hdrlen = ieee80211_hdrlen(hdr->frame_control); memmove(skb->data + WEP_IV_LEN, skb->data, hdrlen); skb_pull(skb, WEP_IV_LEN); } @@ -224,17 +219,15 @@ int ieee80211_wep_decrypt(struct ieee80211_local *local, struct sk_buff *skb, u32 klen; u8 *rc4key; u8 keyidx; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - u16 fc; - int hdrlen; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + unsigned int hdrlen; size_t len; int ret = 0; - fc = le16_to_cpu(hdr->frame_control); - if (!(fc & IEEE80211_FCTL_PROTECTED)) + if (!ieee80211_has_protected(hdr->frame_control)) return -1; - hdrlen = ieee80211_get_hdrlen(fc); + hdrlen = ieee80211_hdrlen(hdr->frame_control); if (skb->len < 8 + hdrlen) return -1; @@ -281,17 +274,15 @@ int ieee80211_wep_decrypt(struct ieee80211_local *local, struct sk_buff *skb, u8 * ieee80211_wep_is_weak_iv(struct sk_buff *skb, struct ieee80211_key *key) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - u16 fc; - int hdrlen; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + unsigned int hdrlen; u8 *ivpos; u32 iv; - fc = le16_to_cpu(hdr->frame_control); - if (!(fc & IEEE80211_FCTL_PROTECTED)) + if (!ieee80211_has_protected(hdr->frame_control)) return NULL; - hdrlen = ieee80211_get_hdrlen(fc); + hdrlen = ieee80211_hdrlen(hdr->frame_control); ivpos = skb->data + hdrlen; iv = (ivpos[0] << 16) | (ivpos[1] << 8) | ivpos[2]; diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 5af3862e719..df0531c2814 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -135,7 +135,39 @@ static int ieee80211_ioctl_giwname(struct net_device *dev, struct iw_request_info *info, char *name, char *extra) { + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_supported_band *sband; + u8 is_ht = 0, is_a = 0, is_b = 0, is_g = 0; + + + sband = local->hw.wiphy->bands[IEEE80211_BAND_5GHZ]; + if (sband) { + is_a = 1; + is_ht |= sband->ht_info.ht_supported; + } + + sband = local->hw.wiphy->bands[IEEE80211_BAND_2GHZ]; + if (sband) { + int i; + /* Check for mandatory rates */ + for (i = 0; i < sband->n_bitrates; i++) { + if (sband->bitrates[i].bitrate == 10) + is_b = 1; + if (sband->bitrates[i].bitrate == 60) + is_g = 1; + } + is_ht |= sband->ht_info.ht_supported; + } + strcpy(name, "IEEE 802.11"); + if (is_a) + strcat(name, "a"); + if (is_b) + strcat(name, "b"); + if (is_g) + strcat(name, "g"); + if (is_ht) + strcat(name, "n"); return 0; } @@ -567,7 +599,7 @@ static int ieee80211_ioctl_giwscan(struct net_device *dev, if (local->sta_sw_scanning || local->sta_hw_scanning) return -EAGAIN; - res = ieee80211_sta_scan_results(dev, extra, data->length); + res = ieee80211_sta_scan_results(dev, info, extra, data->length); if (res >= 0) { data->length = res; return 0; @@ -721,6 +753,9 @@ static int ieee80211_ioctl_siwrts(struct net_device *dev, if (rts->disabled) local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; + else if (!rts->fixed) + /* if the rts value is not fixed, then take default */ + local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; else if (rts->value < 0 || rts->value > IEEE80211_MAX_RTS_THRESHOLD) return -EINVAL; else @@ -949,6 +984,19 @@ static int ieee80211_ioctl_giwencode(struct net_device *dev, erq->length = sdata->keys[idx]->conf.keylen; erq->flags |= IW_ENCODE_ENABLED; + if (sdata->vif.type == IEEE80211_IF_TYPE_STA) { + struct ieee80211_if_sta *ifsta = &sdata->u.sta; + switch (ifsta->auth_alg) { + case WLAN_AUTH_OPEN: + case WLAN_AUTH_LEAP: + erq->flags |= IW_ENCODE_OPEN; + break; + case WLAN_AUTH_SHARED_KEY: + erq->flags |= IW_ENCODE_RESTRICTED; + break; + } + } + return 0; } diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index 345e10e9b31..f809761fbfb 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -49,7 +49,7 @@ static int ieee80211_get_hdr_info(const struct sk_buff *skb, u8 **sa, u8 **da, ieee80211_tx_result ieee80211_tx_h_michael_mic_add(struct ieee80211_tx_data *tx) { - u8 *data, *sa, *da, *key, *mic, qos_tid; + u8 *data, *sa, *da, *key, *mic, qos_tid, key_offset; size_t data_len; u16 fc; struct sk_buff *skb = tx->skb; @@ -88,8 +88,12 @@ ieee80211_tx_h_michael_mic_add(struct ieee80211_tx_data *tx) #else authenticator = 1; #endif - key = &tx->key->conf.key[authenticator ? ALG_TKIP_TEMP_AUTH_TX_MIC_KEY : - ALG_TKIP_TEMP_AUTH_RX_MIC_KEY]; + /* At this point we know we're using ALG_TKIP. To get the MIC key + * we now will rely on the offset from the ieee80211_key_conf::key */ + key_offset = authenticator ? + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY : + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY; + key = &tx->key->conf.key[key_offset]; mic = skb_put(skb, MICHAEL_MIC_LEN); michael_mic(key, da, sa, qos_tid & 0x0f, data, data_len, mic); @@ -100,7 +104,7 @@ ieee80211_tx_h_michael_mic_add(struct ieee80211_tx_data *tx) ieee80211_rx_result ieee80211_rx_h_michael_mic_verify(struct ieee80211_rx_data *rx) { - u8 *data, *sa, *da, *key = NULL, qos_tid; + u8 *data, *sa, *da, *key = NULL, qos_tid, key_offset; size_t data_len; u16 fc; u8 mic[MICHAEL_MIC_LEN]; @@ -131,8 +135,12 @@ ieee80211_rx_h_michael_mic_verify(struct ieee80211_rx_data *rx) #else authenticator = 1; #endif - key = &rx->key->conf.key[authenticator ? ALG_TKIP_TEMP_AUTH_RX_MIC_KEY : - ALG_TKIP_TEMP_AUTH_TX_MIC_KEY]; + /* At this point we know we're using ALG_TKIP. To get the MIC key + * we now will rely on the offset from the ieee80211_key_conf::key */ + key_offset = authenticator ? + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY : + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY; + key = &rx->key->conf.key[key_offset]; michael_mic(key, da, sa, qos_tid & 0x0f, data, data_len, mic); if (memcmp(mic, data + data_len, MICHAEL_MIC_LEN) != 0 || wpa_test) { if (!(rx->flags & IEEE80211_RX_RA_MATCH)) diff --git a/net/rfkill/rfkill-input.c b/net/rfkill/rfkill-input.c index e4b051dbed6..8aa82273014 100644 --- a/net/rfkill/rfkill-input.c +++ b/net/rfkill/rfkill-input.c @@ -30,39 +30,62 @@ struct rfkill_task { spinlock_t lock; /* for accessing last and desired state */ unsigned long last; /* last schedule */ enum rfkill_state desired_state; /* on/off */ - enum rfkill_state current_state; /* on/off */ }; static void rfkill_task_handler(struct work_struct *work) { struct rfkill_task *task = container_of(work, struct rfkill_task, work); - enum rfkill_state state; mutex_lock(&task->mutex); - /* - * Use temp variable to fetch desired state to keep it - * consistent even if rfkill_schedule_toggle() runs in - * another thread or interrupts us. - */ - state = task->desired_state; + rfkill_switch_all(task->type, task->desired_state); - if (state != task->current_state) { - rfkill_switch_all(task->type, state); - task->current_state = state; + mutex_unlock(&task->mutex); +} + +static void rfkill_task_epo_handler(struct work_struct *work) +{ + rfkill_epo(); +} + +static DECLARE_WORK(epo_work, rfkill_task_epo_handler); + +static void rfkill_schedule_epo(void) +{ + schedule_work(&epo_work); +} + +static void rfkill_schedule_set(struct rfkill_task *task, + enum rfkill_state desired_state) +{ + unsigned long flags; + + if (unlikely(work_pending(&epo_work))) + return; + + spin_lock_irqsave(&task->lock, flags); + + if (time_after(jiffies, task->last + msecs_to_jiffies(200))) { + task->desired_state = desired_state; + task->last = jiffies; + schedule_work(&task->work); } - mutex_unlock(&task->mutex); + spin_unlock_irqrestore(&task->lock, flags); } static void rfkill_schedule_toggle(struct rfkill_task *task) { unsigned long flags; + if (unlikely(work_pending(&epo_work))) + return; + spin_lock_irqsave(&task->lock, flags); if (time_after(jiffies, task->last + msecs_to_jiffies(200))) { - task->desired_state = !task->desired_state; + task->desired_state = + rfkill_state_complement(task->desired_state); task->last = jiffies; schedule_work(&task->work); } @@ -70,26 +93,26 @@ static void rfkill_schedule_toggle(struct rfkill_task *task) spin_unlock_irqrestore(&task->lock, flags); } -#define DEFINE_RFKILL_TASK(n, t) \ - struct rfkill_task n = { \ - .work = __WORK_INITIALIZER(n.work, \ - rfkill_task_handler), \ - .type = t, \ - .mutex = __MUTEX_INITIALIZER(n.mutex), \ - .lock = __SPIN_LOCK_UNLOCKED(n.lock), \ - .desired_state = RFKILL_STATE_ON, \ - .current_state = RFKILL_STATE_ON, \ +#define DEFINE_RFKILL_TASK(n, t) \ + struct rfkill_task n = { \ + .work = __WORK_INITIALIZER(n.work, \ + rfkill_task_handler), \ + .type = t, \ + .mutex = __MUTEX_INITIALIZER(n.mutex), \ + .lock = __SPIN_LOCK_UNLOCKED(n.lock), \ + .desired_state = RFKILL_STATE_UNBLOCKED, \ } static DEFINE_RFKILL_TASK(rfkill_wlan, RFKILL_TYPE_WLAN); static DEFINE_RFKILL_TASK(rfkill_bt, RFKILL_TYPE_BLUETOOTH); static DEFINE_RFKILL_TASK(rfkill_uwb, RFKILL_TYPE_UWB); static DEFINE_RFKILL_TASK(rfkill_wimax, RFKILL_TYPE_WIMAX); +static DEFINE_RFKILL_TASK(rfkill_wwan, RFKILL_TYPE_WWAN); static void rfkill_event(struct input_handle *handle, unsigned int type, - unsigned int code, int down) + unsigned int code, int data) { - if (type == EV_KEY && down == 1) { + if (type == EV_KEY && data == 1) { switch (code) { case KEY_WLAN: rfkill_schedule_toggle(&rfkill_wlan); @@ -106,6 +129,28 @@ static void rfkill_event(struct input_handle *handle, unsigned int type, default: break; } + } else if (type == EV_SW) { + switch (code) { + case SW_RFKILL_ALL: + /* EVERY radio type. data != 0 means radios ON */ + /* handle EPO (emergency power off) through shortcut */ + if (data) { + rfkill_schedule_set(&rfkill_wwan, + RFKILL_STATE_UNBLOCKED); + rfkill_schedule_set(&rfkill_wimax, + RFKILL_STATE_UNBLOCKED); + rfkill_schedule_set(&rfkill_uwb, + RFKILL_STATE_UNBLOCKED); + rfkill_schedule_set(&rfkill_bt, + RFKILL_STATE_UNBLOCKED); + rfkill_schedule_set(&rfkill_wlan, + RFKILL_STATE_UNBLOCKED); + } else + rfkill_schedule_epo(); + break; + default: + break; + } } } @@ -168,6 +213,11 @@ static const struct input_device_id rfkill_ids[] = { .evbit = { BIT_MASK(EV_KEY) }, .keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) }, }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT, + .evbit = { BIT(EV_SW) }, + .swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) }, + }, { } }; diff --git a/net/rfkill/rfkill-input.h b/net/rfkill/rfkill-input.h index 4dae5006fc7..f63d0504568 100644 --- a/net/rfkill/rfkill-input.h +++ b/net/rfkill/rfkill-input.h @@ -12,5 +12,6 @@ #define __RFKILL_INPUT_H void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state); +void rfkill_epo(void); #endif /* __RFKILL_INPUT_H */ diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index 4e10a95de83..ce0e23148cd 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -39,8 +39,56 @@ MODULE_LICENSE("GPL"); static LIST_HEAD(rfkill_list); /* list of registered rf switches */ static DEFINE_MUTEX(rfkill_mutex); +static unsigned int rfkill_default_state = RFKILL_STATE_UNBLOCKED; +module_param_named(default_state, rfkill_default_state, uint, 0444); +MODULE_PARM_DESC(default_state, + "Default initial state for all radio types, 0 = radio off"); + static enum rfkill_state rfkill_states[RFKILL_TYPE_MAX]; +static BLOCKING_NOTIFIER_HEAD(rfkill_notifier_list); + + +/** + * register_rfkill_notifier - Add notifier to rfkill notifier chain + * @nb: pointer to the new entry to add to the chain + * + * See blocking_notifier_chain_register() for return value and further + * observations. + * + * Adds a notifier to the rfkill notifier chain. The chain will be + * called with a pointer to the relevant rfkill structure as a parameter, + * refer to include/linux/rfkill.h for the possible events. + * + * Notifiers added to this chain are to always return NOTIFY_DONE. This + * chain is a blocking notifier chain: notifiers can sleep. + * + * Calls to this chain may have been done through a workqueue. One must + * assume unordered asynchronous behaviour, there is no way to know if + * actions related to the event that generated the notification have been + * carried out already. + */ +int register_rfkill_notifier(struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&rfkill_notifier_list, nb); +} +EXPORT_SYMBOL_GPL(register_rfkill_notifier); + +/** + * unregister_rfkill_notifier - remove notifier from rfkill notifier chain + * @nb: pointer to the entry to remove from the chain + * + * See blocking_notifier_chain_unregister() for return value and further + * observations. + * + * Removes a notifier from the rfkill notifier chain. + */ +int unregister_rfkill_notifier(struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(&rfkill_notifier_list, nb); +} +EXPORT_SYMBOL_GPL(unregister_rfkill_notifier); + static void rfkill_led_trigger(struct rfkill *rfkill, enum rfkill_state state) @@ -50,24 +98,99 @@ static void rfkill_led_trigger(struct rfkill *rfkill, if (!led->name) return; - if (state == RFKILL_STATE_OFF) + if (state != RFKILL_STATE_UNBLOCKED) led_trigger_event(led, LED_OFF); else led_trigger_event(led, LED_FULL); #endif /* CONFIG_RFKILL_LEDS */ } +static void notify_rfkill_state_change(struct rfkill *rfkill) +{ + blocking_notifier_call_chain(&rfkill_notifier_list, + RFKILL_STATE_CHANGED, + rfkill); +} + +static void update_rfkill_state(struct rfkill *rfkill) +{ + enum rfkill_state newstate, oldstate; + + if (rfkill->get_state) { + mutex_lock(&rfkill->mutex); + if (!rfkill->get_state(rfkill->data, &newstate)) { + oldstate = rfkill->state; + rfkill->state = newstate; + if (oldstate != newstate) + notify_rfkill_state_change(rfkill); + } + mutex_unlock(&rfkill->mutex); + } +} + +/** + * rfkill_toggle_radio - wrapper for toggle_radio hook + * calls toggle_radio taking into account a lot of "small" + * details. + * @rfkill: the rfkill struct to use + * @force: calls toggle_radio even if cache says it is not needed, + * and also makes sure notifications of the state will be + * sent even if it didn't change + * @state: the new state to call toggle_radio() with + * + * This wrappen protects and enforces the API for toggle_radio + * calls. Note that @force cannot override a (possibly cached) + * state of RFKILL_STATE_HARD_BLOCKED. Any device making use of + * RFKILL_STATE_HARD_BLOCKED implements either get_state() or + * rfkill_force_state(), so the cache either is bypassed or valid. + * + * Note that we do call toggle_radio for RFKILL_STATE_SOFT_BLOCKED + * even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to + * give the driver a hint that it should double-BLOCK the transmitter. + * + * Caller must have aquired rfkill_mutex. + */ static int rfkill_toggle_radio(struct rfkill *rfkill, - enum rfkill_state state) + enum rfkill_state state, + int force) { int retval = 0; + enum rfkill_state oldstate, newstate; + + oldstate = rfkill->state; - if (state != rfkill->state) { + if (rfkill->get_state && !force && + !rfkill->get_state(rfkill->data, &newstate)) + rfkill->state = newstate; + + switch (state) { + case RFKILL_STATE_HARD_BLOCKED: + /* typically happens when refreshing hardware state, + * such as on resume */ + state = RFKILL_STATE_SOFT_BLOCKED; + break; + case RFKILL_STATE_UNBLOCKED: + /* force can't override this, only rfkill_force_state() can */ + if (rfkill->state == RFKILL_STATE_HARD_BLOCKED) + return -EPERM; + break; + case RFKILL_STATE_SOFT_BLOCKED: + /* nothing to do, we want to give drivers the hint to double + * BLOCK even a transmitter that is already in state + * RFKILL_STATE_HARD_BLOCKED */ + break; + } + + if (force || state != rfkill->state) { retval = rfkill->toggle_radio(rfkill->data, state); - if (!retval) { + /* never allow a HARD->SOFT downgrade! */ + if (!retval && rfkill->state != RFKILL_STATE_HARD_BLOCKED) rfkill->state = state; - rfkill_led_trigger(rfkill, state); - } + } + + if (force || rfkill->state != oldstate) { + rfkill_led_trigger(rfkill, rfkill->state); + notify_rfkill_state_change(rfkill); } return retval; @@ -82,7 +205,6 @@ static int rfkill_toggle_radio(struct rfkill *rfkill, * a specific switch is claimed by userspace in which case it is * left alone. */ - void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state) { struct rfkill *rfkill; @@ -93,13 +215,66 @@ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state) list_for_each_entry(rfkill, &rfkill_list, node) { if ((!rfkill->user_claim) && (rfkill->type == type)) - rfkill_toggle_radio(rfkill, state); + rfkill_toggle_radio(rfkill, state, 0); } mutex_unlock(&rfkill_mutex); } EXPORT_SYMBOL(rfkill_switch_all); +/** + * rfkill_epo - emergency power off all transmitters + * + * This kicks all rfkill devices to RFKILL_STATE_SOFT_BLOCKED, ignoring + * everything in its path but rfkill_mutex. + */ +void rfkill_epo(void) +{ + struct rfkill *rfkill; + + mutex_lock(&rfkill_mutex); + list_for_each_entry(rfkill, &rfkill_list, node) { + rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); + } + mutex_unlock(&rfkill_mutex); +} +EXPORT_SYMBOL_GPL(rfkill_epo); + +/** + * rfkill_force_state - Force the internal rfkill radio state + * @rfkill: pointer to the rfkill class to modify. + * @state: the current radio state the class should be forced to. + * + * This function updates the internal state of the radio cached + * by the rfkill class. It should be used when the driver gets + * a notification by the firmware/hardware of the current *real* + * state of the radio rfkill switch. + * + * It may not be called from an atomic context. + */ +int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state) +{ + enum rfkill_state oldstate; + + if (state != RFKILL_STATE_SOFT_BLOCKED && + state != RFKILL_STATE_UNBLOCKED && + state != RFKILL_STATE_HARD_BLOCKED) + return -EINVAL; + + mutex_lock(&rfkill->mutex); + + oldstate = rfkill->state; + rfkill->state = state; + + if (state != oldstate) + notify_rfkill_state_change(rfkill); + + mutex_unlock(&rfkill->mutex); + + return 0; +} +EXPORT_SYMBOL(rfkill_force_state); + static ssize_t rfkill_name_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -109,31 +284,31 @@ static ssize_t rfkill_name_show(struct device *dev, return sprintf(buf, "%s\n", rfkill->name); } -static ssize_t rfkill_type_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static const char *rfkill_get_type_str(enum rfkill_type type) { - struct rfkill *rfkill = to_rfkill(dev); - const char *type; - - switch (rfkill->type) { + switch (type) { case RFKILL_TYPE_WLAN: - type = "wlan"; - break; + return "wlan"; case RFKILL_TYPE_BLUETOOTH: - type = "bluetooth"; - break; + return "bluetooth"; case RFKILL_TYPE_UWB: - type = "ultrawideband"; - break; + return "ultrawideband"; case RFKILL_TYPE_WIMAX: - type = "wimax"; - break; + return "wimax"; + case RFKILL_TYPE_WWAN: + return "wwan"; default: BUG(); } +} + +static ssize_t rfkill_type_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct rfkill *rfkill = to_rfkill(dev); - return sprintf(buf, "%s\n", type); + return sprintf(buf, "%s\n", rfkill_get_type_str(rfkill->type)); } static ssize_t rfkill_state_show(struct device *dev, @@ -142,6 +317,7 @@ static ssize_t rfkill_state_show(struct device *dev, { struct rfkill *rfkill = to_rfkill(dev); + update_rfkill_state(rfkill); return sprintf(buf, "%d\n", rfkill->state); } @@ -156,10 +332,14 @@ static ssize_t rfkill_state_store(struct device *dev, if (!capable(CAP_NET_ADMIN)) return -EPERM; + /* RFKILL_STATE_HARD_BLOCKED is illegal here... */ + if (state != RFKILL_STATE_UNBLOCKED && + state != RFKILL_STATE_SOFT_BLOCKED) + return -EINVAL; + if (mutex_lock_interruptible(&rfkill->mutex)) return -ERESTARTSYS; - error = rfkill_toggle_radio(rfkill, - state ? RFKILL_STATE_ON : RFKILL_STATE_OFF); + error = rfkill_toggle_radio(rfkill, state, 0); mutex_unlock(&rfkill->mutex); return error ? error : count; @@ -200,7 +380,8 @@ static ssize_t rfkill_claim_store(struct device *dev, if (rfkill->user_claim != claim) { if (!claim) rfkill_toggle_radio(rfkill, - rfkill_states[rfkill->type]); + rfkill_states[rfkill->type], + 0); rfkill->user_claim = claim; } @@ -233,12 +414,12 @@ static int rfkill_suspend(struct device *dev, pm_message_t state) if (dev->power.power_state.event != state.event) { if (state.event & PM_EVENT_SLEEP) { - mutex_lock(&rfkill->mutex); - - if (rfkill->state == RFKILL_STATE_ON) - rfkill->toggle_radio(rfkill->data, - RFKILL_STATE_OFF); + /* Stop transmitter, keep state, no notifies */ + update_rfkill_state(rfkill); + mutex_lock(&rfkill->mutex); + rfkill->toggle_radio(rfkill->data, + RFKILL_STATE_SOFT_BLOCKED); mutex_unlock(&rfkill->mutex); } @@ -255,8 +436,8 @@ static int rfkill_resume(struct device *dev) if (dev->power.power_state.event != PM_EVENT_ON) { mutex_lock(&rfkill->mutex); - if (rfkill->state == RFKILL_STATE_ON) - rfkill->toggle_radio(rfkill->data, RFKILL_STATE_ON); + /* restore radio state AND notify everybody */ + rfkill_toggle_radio(rfkill, rfkill->state, 1); mutex_unlock(&rfkill->mutex); } @@ -269,12 +450,51 @@ static int rfkill_resume(struct device *dev) #define rfkill_resume NULL #endif +static int rfkill_blocking_uevent_notifier(struct notifier_block *nb, + unsigned long eventid, + void *data) +{ + struct rfkill *rfkill = (struct rfkill *)data; + + switch (eventid) { + case RFKILL_STATE_CHANGED: + kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE); + break; + default: + break; + } + + return NOTIFY_DONE; +} + +static struct notifier_block rfkill_blocking_uevent_nb = { + .notifier_call = rfkill_blocking_uevent_notifier, + .priority = 0, +}; + +static int rfkill_dev_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct rfkill *rfkill = to_rfkill(dev); + int error; + + error = add_uevent_var(env, "RFKILL_NAME=%s", rfkill->name); + if (error) + return error; + error = add_uevent_var(env, "RFKILL_TYPE=%s", + rfkill_get_type_str(rfkill->type)); + if (error) + return error; + error = add_uevent_var(env, "RFKILL_STATE=%d", rfkill->state); + return error; +} + static struct class rfkill_class = { .name = "rfkill", .dev_release = rfkill_release, .dev_attrs = rfkill_dev_attrs, .suspend = rfkill_suspend, .resume = rfkill_resume, + .dev_uevent = rfkill_dev_uevent, }; static int rfkill_add_switch(struct rfkill *rfkill) @@ -283,7 +503,7 @@ static int rfkill_add_switch(struct rfkill *rfkill) mutex_lock(&rfkill_mutex); - error = rfkill_toggle_radio(rfkill, rfkill_states[rfkill->type]); + error = rfkill_toggle_radio(rfkill, rfkill_states[rfkill->type], 0); if (!error) list_add_tail(&rfkill->node, &rfkill_list); @@ -296,7 +516,7 @@ static void rfkill_remove_switch(struct rfkill *rfkill) { mutex_lock(&rfkill_mutex); list_del_init(&rfkill->node); - rfkill_toggle_radio(rfkill, RFKILL_STATE_OFF); + rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); mutex_unlock(&rfkill_mutex); } @@ -412,7 +632,7 @@ int rfkill_register(struct rfkill *rfkill) EXPORT_SYMBOL(rfkill_register); /** - * rfkill_unregister - Uegister a rfkill structure. + * rfkill_unregister - Unregister a rfkill structure. * @rfkill: rfkill structure to be unregistered * * This function should be called by the network driver during device @@ -436,8 +656,13 @@ static int __init rfkill_init(void) int error; int i; + /* RFKILL_STATE_HARD_BLOCKED is illegal here... */ + if (rfkill_default_state != RFKILL_STATE_SOFT_BLOCKED && + rfkill_default_state != RFKILL_STATE_UNBLOCKED) + return -EINVAL; + for (i = 0; i < ARRAY_SIZE(rfkill_states); i++) - rfkill_states[i] = RFKILL_STATE_ON; + rfkill_states[i] = rfkill_default_state; error = class_register(&rfkill_class); if (error) { @@ -445,11 +670,14 @@ static int __init rfkill_init(void) return error; } + register_rfkill_notifier(&rfkill_blocking_uevent_nb); + return 0; } static void __exit rfkill_exit(void) { + unregister_rfkill_notifier(&rfkill_blocking_uevent_nb); class_unregister(&rfkill_class); } diff --git a/net/socket.c b/net/socket.c index 66c4a8cf6db..81fe8251304 100644 --- a/net/socket.c +++ b/net/socket.c @@ -90,6 +90,7 @@ #include <asm/unistd.h> #include <net/compat.h> +#include <net/wext.h> #include <net/sock.h> #include <linux/netfilter.h> @@ -2210,10 +2211,19 @@ static long compat_sock_ioctl(struct file *file, unsigned cmd, { struct socket *sock = file->private_data; int ret = -ENOIOCTLCMD; + struct sock *sk; + struct net *net; + + sk = sock->sk; + net = sock_net(sk); if (sock->ops->compat_ioctl) ret = sock->ops->compat_ioctl(sock, cmd, arg); + if (ret == -ENOIOCTLCMD && + (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST)) + ret = compat_wext_handle_ioctl(net, cmd, arg); + return ret; } #endif diff --git a/net/wireless/wext.c b/net/wireless/wext.c index 947188a5b93..273a8435999 100644 --- a/net/wireless/wext.c +++ b/net/wireless/wext.c @@ -500,7 +500,7 @@ static int call_commit_handler(struct net_device *dev) /* * Calculate size of private arguments */ -static inline int get_priv_size(__u16 args) +static int get_priv_size(__u16 args) { int num = args & IW_PRIV_SIZE_MASK; int type = (args & IW_PRIV_TYPE_MASK) >> 12; @@ -512,10 +512,9 @@ static inline int get_priv_size(__u16 args) /* * Re-calculate the size of private arguments */ -static inline int adjust_priv_size(__u16 args, - union iwreq_data * wrqu) +static int adjust_priv_size(__u16 args, struct iw_point *iwp) { - int num = wrqu->data.length; + int num = iwp->length; int max = args & IW_PRIV_SIZE_MASK; int type = (args & IW_PRIV_TYPE_MASK) >> 12; @@ -695,19 +694,150 @@ void wext_proc_exit(struct net *net) */ /* ---------------------------------------------------------------- */ +static int ioctl_standard_iw_point(struct iw_point *iwp, unsigned int cmd, + const struct iw_ioctl_description *descr, + iw_handler handler, struct net_device *dev, + struct iw_request_info *info) +{ + int err, extra_size, user_length = 0, essid_compat = 0; + char *extra; + + /* Calculate space needed by arguments. Always allocate + * for max space. + */ + extra_size = descr->max_tokens * descr->token_size; + + /* Check need for ESSID compatibility for WE < 21 */ + switch (cmd) { + case SIOCSIWESSID: + case SIOCGIWESSID: + case SIOCSIWNICKN: + case SIOCGIWNICKN: + if (iwp->length == descr->max_tokens + 1) + essid_compat = 1; + else if (IW_IS_SET(cmd) && (iwp->length != 0)) { + char essid[IW_ESSID_MAX_SIZE + 1]; + + err = copy_from_user(essid, iwp->pointer, + iwp->length * + descr->token_size); + if (err) + return -EFAULT; + + if (essid[iwp->length - 1] == '\0') + essid_compat = 1; + } + break; + default: + break; + } + + iwp->length -= essid_compat; + + /* Check what user space is giving us */ + if (IW_IS_SET(cmd)) { + /* Check NULL pointer */ + if (!iwp->pointer && iwp->length != 0) + return -EFAULT; + /* Check if number of token fits within bounds */ + if (iwp->length > descr->max_tokens) + return -E2BIG; + if (iwp->length < descr->min_tokens) + return -EINVAL; + } else { + /* Check NULL pointer */ + if (!iwp->pointer) + return -EFAULT; + /* Save user space buffer size for checking */ + user_length = iwp->length; + + /* Don't check if user_length > max to allow forward + * compatibility. The test user_length < min is + * implied by the test at the end. + */ + + /* Support for very large requests */ + if ((descr->flags & IW_DESCR_FLAG_NOMAX) && + (user_length > descr->max_tokens)) { + /* Allow userspace to GET more than max so + * we can support any size GET requests. + * There is still a limit : -ENOMEM. + */ + extra_size = user_length * descr->token_size; + + /* Note : user_length is originally a __u16, + * and token_size is controlled by us, + * so extra_size won't get negative and + * won't overflow... + */ + } + } + + /* kzalloc() ensures NULL-termination for essid_compat. */ + extra = kzalloc(extra_size, GFP_KERNEL); + if (!extra) + return -ENOMEM; + + /* If it is a SET, get all the extra data in here */ + if (IW_IS_SET(cmd) && (iwp->length != 0)) { + if (copy_from_user(extra, iwp->pointer, + iwp->length * + descr->token_size)) { + err = -EFAULT; + goto out; + } + } + + err = handler(dev, info, (union iwreq_data *) iwp, extra); + + iwp->length += essid_compat; + + /* If we have something to return to the user */ + if (!err && IW_IS_GET(cmd)) { + /* Check if there is enough buffer up there */ + if (user_length < iwp->length) { + err = -E2BIG; + goto out; + } + + if (copy_to_user(iwp->pointer, extra, + iwp->length * + descr->token_size)) { + err = -EFAULT; + goto out; + } + } + + /* Generate an event to notify listeners of the change */ + if ((descr->flags & IW_DESCR_FLAG_EVENT) && err == -EIWCOMMIT) { + union iwreq_data *data = (union iwreq_data *) iwp; + + if (descr->flags & IW_DESCR_FLAG_RESTRICT) + /* If the event is restricted, don't + * export the payload. + */ + wireless_send_event(dev, cmd, data, NULL); + else + wireless_send_event(dev, cmd, data, extra); + } + +out: + kfree(extra); + return err; +} + /* * Wrapper to call a standard Wireless Extension handler. * We do various checks and also take care of moving data between * user space and kernel space. */ static int ioctl_standard_call(struct net_device * dev, - struct ifreq * ifr, + struct iwreq *iwr, unsigned int cmd, + struct iw_request_info *info, iw_handler handler) { - struct iwreq * iwr = (struct iwreq *) ifr; const struct iw_ioctl_description * descr; - struct iw_request_info info; int ret = -EINVAL; /* Get the description of the IOCTL */ @@ -715,145 +845,19 @@ static int ioctl_standard_call(struct net_device * dev, return -EOPNOTSUPP; descr = &(standard_ioctl[cmd - SIOCIWFIRST]); - /* Prepare the call */ - info.cmd = cmd; - info.flags = 0; - /* Check if we have a pointer to user space data or not */ if (descr->header_type != IW_HEADER_TYPE_POINT) { /* No extra arguments. Trivial to handle */ - ret = handler(dev, &info, &(iwr->u), NULL); + ret = handler(dev, info, &(iwr->u), NULL); /* Generate an event to notify listeners of the change */ if ((descr->flags & IW_DESCR_FLAG_EVENT) && ((ret == 0) || (ret == -EIWCOMMIT))) wireless_send_event(dev, cmd, &(iwr->u), NULL); } else { - char * extra; - int extra_size; - int user_length = 0; - int err; - int essid_compat = 0; - - /* Calculate space needed by arguments. Always allocate - * for max space. Easier, and won't last long... */ - extra_size = descr->max_tokens * descr->token_size; - - /* Check need for ESSID compatibility for WE < 21 */ - switch (cmd) { - case SIOCSIWESSID: - case SIOCGIWESSID: - case SIOCSIWNICKN: - case SIOCGIWNICKN: - if (iwr->u.data.length == descr->max_tokens + 1) - essid_compat = 1; - else if (IW_IS_SET(cmd) && (iwr->u.data.length != 0)) { - char essid[IW_ESSID_MAX_SIZE + 1]; - - err = copy_from_user(essid, iwr->u.data.pointer, - iwr->u.data.length * - descr->token_size); - if (err) - return -EFAULT; - - if (essid[iwr->u.data.length - 1] == '\0') - essid_compat = 1; - } - break; - default: - break; - } - - iwr->u.data.length -= essid_compat; - - /* Check what user space is giving us */ - if (IW_IS_SET(cmd)) { - /* Check NULL pointer */ - if ((iwr->u.data.pointer == NULL) && - (iwr->u.data.length != 0)) - return -EFAULT; - /* Check if number of token fits within bounds */ - if (iwr->u.data.length > descr->max_tokens) - return -E2BIG; - if (iwr->u.data.length < descr->min_tokens) - return -EINVAL; - } else { - /* Check NULL pointer */ - if (iwr->u.data.pointer == NULL) - return -EFAULT; - /* Save user space buffer size for checking */ - user_length = iwr->u.data.length; - - /* Don't check if user_length > max to allow forward - * compatibility. The test user_length < min is - * implied by the test at the end. */ - - /* Support for very large requests */ - if ((descr->flags & IW_DESCR_FLAG_NOMAX) && - (user_length > descr->max_tokens)) { - /* Allow userspace to GET more than max so - * we can support any size GET requests. - * There is still a limit : -ENOMEM. */ - extra_size = user_length * descr->token_size; - /* Note : user_length is originally a __u16, - * and token_size is controlled by us, - * so extra_size won't get negative and - * won't overflow... */ - } - } - - /* Create the kernel buffer */ - /* kzalloc ensures NULL-termination for essid_compat */ - extra = kzalloc(extra_size, GFP_KERNEL); - if (extra == NULL) - return -ENOMEM; - - /* If it is a SET, get all the extra data in here */ - if (IW_IS_SET(cmd) && (iwr->u.data.length != 0)) { - err = copy_from_user(extra, iwr->u.data.pointer, - iwr->u.data.length * - descr->token_size); - if (err) { - kfree(extra); - return -EFAULT; - } - } - - /* Call the handler */ - ret = handler(dev, &info, &(iwr->u), extra); - - iwr->u.data.length += essid_compat; - - /* If we have something to return to the user */ - if (!ret && IW_IS_GET(cmd)) { - /* Check if there is enough buffer up there */ - if (user_length < iwr->u.data.length) { - kfree(extra); - return -E2BIG; - } - - err = copy_to_user(iwr->u.data.pointer, extra, - iwr->u.data.length * - descr->token_size); - if (err) - ret = -EFAULT; - } - - /* Generate an event to notify listeners of the change */ - if ((descr->flags & IW_DESCR_FLAG_EVENT) && - ((ret == 0) || (ret == -EIWCOMMIT))) { - if (descr->flags & IW_DESCR_FLAG_RESTRICT) - /* If the event is restricted, don't - * export the payload */ - wireless_send_event(dev, cmd, &(iwr->u), NULL); - else - wireless_send_event(dev, cmd, &(iwr->u), - extra); - } - - /* Cleanup - I told you it wasn't that long ;-) */ - kfree(extra); + ret = ioctl_standard_iw_point(&iwr->u.data, cmd, descr, + handler, dev, info); } /* Call commit handler if needed and defined */ @@ -881,25 +885,22 @@ static int ioctl_standard_call(struct net_device * dev, * a iw_handler but process it in your ioctl handler (i.e. use the * old driver API). */ -static int ioctl_private_call(struct net_device *dev, struct ifreq *ifr, - unsigned int cmd, iw_handler handler) +static int get_priv_descr_and_size(struct net_device *dev, unsigned int cmd, + const struct iw_priv_args **descrp) { - struct iwreq * iwr = (struct iwreq *) ifr; - const struct iw_priv_args * descr = NULL; - struct iw_request_info info; - int extra_size = 0; - int i; - int ret = -EINVAL; + const struct iw_priv_args *descr; + int i, extra_size; - /* Get the description of the IOCTL */ - for (i = 0; i < dev->wireless_handlers->num_private_args; i++) + descr = NULL; + for (i = 0; i < dev->wireless_handlers->num_private_args; i++) { if (cmd == dev->wireless_handlers->private_args[i].cmd) { - descr = &(dev->wireless_handlers->private_args[i]); + descr = &dev->wireless_handlers->private_args[i]; break; } + } - /* Compute the size of the set/get arguments */ - if (descr != NULL) { + extra_size = 0; + if (descr) { if (IW_IS_SET(cmd)) { int offset = 0; /* For sub-ioctls */ /* Check for sub-ioctl handler */ @@ -924,72 +925,77 @@ static int ioctl_private_call(struct net_device *dev, struct ifreq *ifr, extra_size = 0; } } + *descrp = descr; + return extra_size; +} - /* Prepare the call */ - info.cmd = cmd; - info.flags = 0; +static int ioctl_private_iw_point(struct iw_point *iwp, unsigned int cmd, + const struct iw_priv_args *descr, + iw_handler handler, struct net_device *dev, + struct iw_request_info *info, int extra_size) +{ + char *extra; + int err; - /* Check if we have a pointer to user space data or not. */ - if (extra_size == 0) { - /* No extra arguments. Trivial to handle */ - ret = handler(dev, &info, &(iwr->u), (char *) &(iwr->u)); - } else { - char * extra; - int err; + /* Check what user space is giving us */ + if (IW_IS_SET(cmd)) { + if (!iwp->pointer && iwp->length != 0) + return -EFAULT; - /* Check what user space is giving us */ - if (IW_IS_SET(cmd)) { - /* Check NULL pointer */ - if ((iwr->u.data.pointer == NULL) && - (iwr->u.data.length != 0)) - return -EFAULT; + if (iwp->length > (descr->set_args & IW_PRIV_SIZE_MASK)) + return -E2BIG; + } else if (!iwp->pointer) + return -EFAULT; - /* Does it fits within bounds ? */ - if (iwr->u.data.length > (descr->set_args & - IW_PRIV_SIZE_MASK)) - return -E2BIG; - } else if (iwr->u.data.pointer == NULL) - return -EFAULT; + extra = kmalloc(extra_size, GFP_KERNEL); + if (!extra) + return -ENOMEM; - /* Always allocate for max space. Easier, and won't last - * long... */ - extra = kmalloc(extra_size, GFP_KERNEL); - if (extra == NULL) - return -ENOMEM; - - /* If it is a SET, get all the extra data in here */ - if (IW_IS_SET(cmd) && (iwr->u.data.length != 0)) { - err = copy_from_user(extra, iwr->u.data.pointer, - extra_size); - if (err) { - kfree(extra); - return -EFAULT; - } + /* If it is a SET, get all the extra data in here */ + if (IW_IS_SET(cmd) && (iwp->length != 0)) { + if (copy_from_user(extra, iwp->pointer, extra_size)) { + err = -EFAULT; + goto out; } + } - /* Call the handler */ - ret = handler(dev, &info, &(iwr->u), extra); + /* Call the handler */ + err = handler(dev, info, (union iwreq_data *) iwp, extra); - /* If we have something to return to the user */ - if (!ret && IW_IS_GET(cmd)) { + /* If we have something to return to the user */ + if (!err && IW_IS_GET(cmd)) { + /* Adjust for the actual length if it's variable, + * avoid leaking kernel bits outside. + */ + if (!(descr->get_args & IW_PRIV_SIZE_FIXED)) + extra_size = adjust_priv_size(descr->get_args, iwp); - /* Adjust for the actual length if it's variable, - * avoid leaking kernel bits outside. */ - if (!(descr->get_args & IW_PRIV_SIZE_FIXED)) { - extra_size = adjust_priv_size(descr->get_args, - &(iwr->u)); - } + if (copy_to_user(iwp->pointer, extra, extra_size)) + err = -EFAULT; + } - err = copy_to_user(iwr->u.data.pointer, extra, - extra_size); - if (err) - ret = -EFAULT; - } +out: + kfree(extra); + return err; +} - /* Cleanup - I told you it wasn't that long ;-) */ - kfree(extra); - } +static int ioctl_private_call(struct net_device *dev, struct iwreq *iwr, + unsigned int cmd, struct iw_request_info *info, + iw_handler handler) +{ + int extra_size = 0, ret = -EINVAL; + const struct iw_priv_args *descr; + extra_size = get_priv_descr_and_size(dev, cmd, &descr); + + /* Check if we have a pointer to user space data or not. */ + if (extra_size == 0) { + /* No extra arguments. Trivial to handle */ + ret = handler(dev, info, &(iwr->u), (char *) &(iwr->u)); + } else { + ret = ioctl_private_iw_point(&iwr->u.data, cmd, descr, + handler, dev, info, extra_size); + } /* Call commit handler if needed and defined */ if (ret == -EIWCOMMIT) @@ -999,12 +1005,21 @@ static int ioctl_private_call(struct net_device *dev, struct ifreq *ifr, } /* ---------------------------------------------------------------- */ +typedef int (*wext_ioctl_func)(struct net_device *, struct iwreq *, + unsigned int, struct iw_request_info *, + iw_handler); + /* * Main IOCTl dispatcher. * Check the type of IOCTL and call the appropriate wrapper... */ -static int wireless_process_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd) +static int wireless_process_ioctl(struct net *net, struct ifreq *ifr, + unsigned int cmd, + struct iw_request_info *info, + wext_ioctl_func standard, + wext_ioctl_func private) { + struct iwreq *iwr = (struct iwreq *) ifr; struct net_device *dev; iw_handler handler; @@ -1019,12 +1034,12 @@ static int wireless_process_ioctl(struct net *net, struct ifreq *ifr, unsigned i * Note that 'cmd' is already filtered in dev_ioctl() with * (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) */ if (cmd == SIOCGIWSTATS) - return ioctl_standard_call(dev, ifr, cmd, - &iw_handler_get_iwstats); + return standard(dev, iwr, cmd, info, + &iw_handler_get_iwstats); if (cmd == SIOCGIWPRIV && dev->wireless_handlers) - return ioctl_standard_call(dev, ifr, cmd, - &iw_handler_get_private); + return standard(dev, iwr, cmd, info, + &iw_handler_get_private); /* Basic check */ if (!netif_device_present(dev)) @@ -1035,9 +1050,9 @@ static int wireless_process_ioctl(struct net *net, struct ifreq *ifr, unsigned i if (handler) { /* Standard and private are not the same */ if (cmd < SIOCIWFIRSTPRIV) - return ioctl_standard_call(dev, ifr, cmd, handler); + return standard(dev, iwr, cmd, info, handler); else - return ioctl_private_call(dev, ifr, cmd, handler); + return private(dev, iwr, cmd, info, handler); } /* Old driver API : call driver ioctl handler */ if (dev->do_ioctl) @@ -1045,27 +1060,154 @@ static int wireless_process_ioctl(struct net *net, struct ifreq *ifr, unsigned i return -EOPNOTSUPP; } -/* entry point from dev ioctl */ -int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd, - void __user *arg) +/* If command is `set a parameter', or `get the encoding parameters', + * check if the user has the right to do it. + */ +static int wext_permission_check(unsigned int cmd) { - int ret; - - /* If command is `set a parameter', or - * `get the encoding parameters', check if - * the user has the right to do it */ if ((IW_IS_SET(cmd) || cmd == SIOCGIWENCODE || cmd == SIOCGIWENCODEEXT) && !capable(CAP_NET_ADMIN)) return -EPERM; + return 0; +} + +/* entry point from dev ioctl */ +static int wext_ioctl_dispatch(struct net *net, struct ifreq *ifr, + unsigned int cmd, struct iw_request_info *info, + wext_ioctl_func standard, + wext_ioctl_func private) +{ + int ret = wext_permission_check(cmd); + + if (ret) + return ret; + dev_load(net, ifr->ifr_name); rtnl_lock(); - ret = wireless_process_ioctl(net, ifr, cmd); + ret = wireless_process_ioctl(net, ifr, cmd, info, standard, private); rtnl_unlock(); - if (IW_IS_GET(cmd) && copy_to_user(arg, ifr, sizeof(struct iwreq))) + + return ret; +} + +int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd, + void __user *arg) +{ + struct iw_request_info info = { .cmd = cmd, .flags = 0 }; + int ret; + + ret = wext_ioctl_dispatch(net, ifr, cmd, &info, + ioctl_standard_call, + ioctl_private_call); + if (ret >= 0 && + IW_IS_GET(cmd) && + copy_to_user(arg, ifr, sizeof(struct iwreq))) + return -EFAULT; + + return ret; +} + +#ifdef CONFIG_COMPAT +static int compat_standard_call(struct net_device *dev, + struct iwreq *iwr, + unsigned int cmd, + struct iw_request_info *info, + iw_handler handler) +{ + const struct iw_ioctl_description *descr; + struct compat_iw_point *iwp_compat; + struct iw_point iwp; + int err; + + descr = standard_ioctl + (cmd - SIOCIWFIRST); + + if (descr->header_type != IW_HEADER_TYPE_POINT) + return ioctl_standard_call(dev, iwr, cmd, info, handler); + + iwp_compat = (struct compat_iw_point *) &iwr->u.data; + iwp.pointer = compat_ptr(iwp_compat->pointer); + iwp.length = iwp_compat->length; + iwp.flags = iwp_compat->flags; + + err = ioctl_standard_iw_point(&iwp, cmd, descr, handler, dev, info); + + iwp_compat->pointer = ptr_to_compat(iwp.pointer); + iwp_compat->length = iwp.length; + iwp_compat->flags = iwp.flags; + + return err; +} + +static int compat_private_call(struct net_device *dev, struct iwreq *iwr, + unsigned int cmd, struct iw_request_info *info, + iw_handler handler) +{ + const struct iw_priv_args *descr; + int ret, extra_size; + + extra_size = get_priv_descr_and_size(dev, cmd, &descr); + + /* Check if we have a pointer to user space data or not. */ + if (extra_size == 0) { + /* No extra arguments. Trivial to handle */ + ret = handler(dev, info, &(iwr->u), (char *) &(iwr->u)); + } else { + struct compat_iw_point *iwp_compat; + struct iw_point iwp; + + iwp_compat = (struct compat_iw_point *) &iwr->u.data; + iwp.pointer = compat_ptr(iwp_compat->pointer); + iwp.length = iwp_compat->length; + iwp.flags = iwp_compat->flags; + + ret = ioctl_private_iw_point(&iwp, cmd, descr, + handler, dev, info, extra_size); + + iwp_compat->pointer = ptr_to_compat(iwp.pointer); + iwp_compat->length = iwp.length; + iwp_compat->flags = iwp.flags; + } + + /* Call commit handler if needed and defined */ + if (ret == -EIWCOMMIT) + ret = call_commit_handler(dev); + + return ret; +} + +int compat_wext_handle_ioctl(struct net *net, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + struct iw_request_info info; + struct iwreq iwr; + char *colon; + int ret; + + if (copy_from_user(&iwr, argp, sizeof(struct iwreq))) + return -EFAULT; + + iwr.ifr_name[IFNAMSIZ-1] = 0; + colon = strchr(iwr.ifr_name, ':'); + if (colon) + *colon = 0; + + info.cmd = cmd; + info.flags = IW_REQUEST_FLAG_COMPAT; + + ret = wext_ioctl_dispatch(net, (struct ifreq *) &iwr, cmd, &info, + compat_standard_call, + compat_private_call); + + if (ret >= 0 && + IW_IS_GET(cmd) && + copy_to_user(argp, &iwr, sizeof(struct iwreq))) return -EFAULT; + return ret; } +#endif /************************* EVENT PROCESSING *************************/ /* |