aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/lm8316
-rw-r--r--drivers/hwmon/Kconfig4
-rw-r--r--drivers/hwmon/lm83.c50
3 files changed, 51 insertions, 19 deletions
diff --git a/Documentation/hwmon/lm83 b/Documentation/hwmon/lm83
index 061d9ed8ff4..74aa7ee1a35 100644
--- a/Documentation/hwmon/lm83
+++ b/Documentation/hwmon/lm83
@@ -7,6 +7,10 @@ Supported chips:
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM83.html
+ * National Semiconductor LM82
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LM/LM82.html
Author: Jean Delvare <khali@linux-fr.org>
@@ -15,10 +19,11 @@ Description
-----------
The LM83 is a digital temperature sensor. It senses its own temperature as
-well as the temperature of up to three external diodes. It is compatible
-with many other devices such as the LM84 and all other ADM1021 clones.
-The main difference between the LM83 and the LM84 in that the later can
-only sense the temperature of one external diode.
+well as the temperature of up to three external diodes. The LM82 is
+a stripped down version of the LM83 that only supports one external diode.
+Both are compatible with many other devices such as the LM84 and all
+other ADM1021 clones. The main difference between the LM83 and the LM84
+in that the later can only sense the temperature of one external diode.
Using the adm1021 driver for a LM83 should work, but only two temperatures
will be reported instead of four.
@@ -36,6 +41,9 @@ Unconfirmed motherboards:
Iwill MPX2
Soltek SL-75DRV5
+The LM82 is confirmed to have been found on most AMD Geode reference
+designs and test platforms.
+
The driver has been successfully tested by Magnus Forsström, who I'd
like to thank here. More testers will be of course welcome.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 99cdc612d2c..a6a8d66129b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -236,11 +236,11 @@ config SENSORS_LM80
will be called lm80.
config SENSORS_LM83
- tristate "National Semiconductor LM83"
+ tristate "National Semiconductor LM83 and compatibles"
depends on HWMON && I2C
help
If you say yes here you get support for National Semiconductor
- LM83 sensor chips.
+ LM82 and LM83 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm83.
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index aac4ec2bf69..2137d7879df 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -12,6 +12,10 @@
* Since the datasheet omits to give the chip stepping code, I give it
* here: 0x03 (at register 0xff).
*
+ * Also supports the LM82 temp sensor, which is basically a stripped down
+ * model of the LM83. Datasheet is here:
+ * http://www.national.com/pf/LM/LM82.html
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -52,7 +56,7 @@ static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
* Insmod parameters
*/
-I2C_CLIENT_INSMOD_1(lm83);
+I2C_CLIENT_INSMOD_2(lm83, lm82);
/*
* The LM83 registers
@@ -283,6 +287,9 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
if (man_id == 0x01) { /* National Semiconductor */
if (chip_id == 0x03) {
kind = lm83;
+ } else
+ if (chip_id == 0x01) {
+ kind = lm82;
}
}
@@ -296,6 +303,9 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
if (kind == lm83) {
name = "lm83";
+ } else
+ if (kind == lm82) {
+ name = "lm82";
}
/* We can fill in the remaining client fields */
@@ -319,32 +329,46 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
goto exit_detach;
}
+ /*
+ * The LM82 can only monitor one external diode which is
+ * at the same register as the LM83 temp3 entry - so we
+ * declare 1 and 3 common, and then 2 and 4 only for the LM83.
+ */
+
device_create_file(&new_client->dev,
&sensor_dev_attr_temp1_input.dev_attr);
device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_input.dev_attr);
- device_create_file(&new_client->dev,
&sensor_dev_attr_temp3_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp4_input.dev_attr);
+
device_create_file(&new_client->dev,
&sensor_dev_attr_temp1_max.dev_attr);
device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_max.dev_attr);
- device_create_file(&new_client->dev,
&sensor_dev_attr_temp3_max.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp4_max.dev_attr);
+
device_create_file(&new_client->dev,
&sensor_dev_attr_temp1_crit.dev_attr);
device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_crit.dev_attr);
- device_create_file(&new_client->dev,
&sensor_dev_attr_temp3_crit.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp4_crit.dev_attr);
+
device_create_file(&new_client->dev, &dev_attr_alarms);
+ if (kind == lm83) {
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp2_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp4_input.dev_attr);
+
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp2_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp4_max.dev_attr);
+
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp2_crit.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp4_crit.dev_attr);
+ }
+
return 0;
exit_detach: