diff options
| -rw-r--r-- | drivers/usb/serial/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/usb/serial/Makefile | 3 | ||||
| -rw-r--r-- | drivers/usb/serial/spcp8x5.c | 1075 |
3 files changed, 1087 insertions, 1 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index a769f6a5d7f..f9c6c0922c0 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -503,6 +503,16 @@ config USB_SERIAL_OTI6858 To compile this driver as a module, choose M here: the module will be called oti6858. +config USB_SERIAL_SPCP8X5 + tristate "USB SPCP8x5 USB To Serial Driver" + depends on USB_SERIAL + help + Say Y here if you want to use the spcp8x5 converter chip. This is + commonly found in some Z-Wave USB devices. + + To compile this driver as a module, choose M here: the + module will be called spcp8x5. + config USB_SERIAL_HP4X tristate "USB HP4x Calculators support" depends on USB_SERIAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 0db109a54d1..756859510d8 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -30,8 +30,8 @@ obj-$(CONFIG_USB_SERIAL_GARMIN) += garmin_gps.o obj-$(CONFIG_USB_SERIAL_HP4X) += hp4x.o obj-$(CONFIG_USB_SERIAL_IPAQ) += ipaq.o obj-$(CONFIG_USB_SERIAL_IPW) += ipw.o -obj-$(CONFIG_USB_SERIAL_IUU) += iuu_phoenix.o obj-$(CONFIG_USB_SERIAL_IR) += ir-usb.o +obj-$(CONFIG_USB_SERIAL_IUU) += iuu_phoenix.o obj-$(CONFIG_USB_SERIAL_KEYSPAN) += keyspan.o obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o @@ -46,6 +46,7 @@ obj-$(CONFIG_USB_SERIAL_OTI6858) += oti6858.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o +obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c new file mode 100644 index 00000000000..1b46b846f10 --- /dev/null +++ b/drivers/usb/serial/spcp8x5.c @@ -0,0 +1,1075 @@ +/* + * spcp8x5 USB to serial adaptor driver + * + * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn) + * Copyright (C) 2006 S1 Corp. + * + * Original driver for 2.6.10 pl2303 driver by + * Greg Kroah-Hartman (greg@kroah.com) + * Changes for 2.6.20 by Harald Klein <hari@vt100.at> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + + +/* Version Information */ +#define DRIVER_VERSION "v0.04" +#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" + +static int debug; + +#define SPCP8x5_007_VID 0x04FC +#define SPCP8x5_007_PID 0x0201 +#define SPCP8x5_008_VID 0x04fc +#define SPCP8x5_008_PID 0x0235 +#define SPCP8x5_PHILIPS_VID 0x0471 +#define SPCP8x5_PHILIPS_PID 0x081e +#define SPCP8x5_INTERMATIC_VID 0x04FC +#define SPCP8x5_INTERMATIC_PID 0x0204 +#define SPCP8x5_835_VID 0x04fc +#define SPCP8x5_835_PID 0x0231 + +static struct usb_device_id id_table [] = { + { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)}, + { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, + { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, + { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)}, + { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID)}, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +struct spcp8x5_usb_ctrl_arg { + u8 type; + u8 cmd; + u8 cmd_type; + u16 value; + u16 index; + u16 length; +}; + +/* wait 30s before close */ +#define SPCP8x5_CLOSING_WAIT (30*HZ) + +#define SPCP8x5_BUF_SIZE 1024 + + +/* spcp8x5 spec register define */ +#define MCR_CONTROL_LINE_RTS 0x02 +#define MCR_CONTROL_LINE_DTR 0x01 +#define MCR_DTR 0x01 +#define MCR_RTS 0x02 + +#define MSR_STATUS_LINE_DCD 0x80 +#define MSR_STATUS_LINE_RI 0x40 +#define MSR_STATUS_LINE_DSR 0x20 +#define MSR_STATUS_LINE_CTS 0x10 + +/* verdor command here , we should define myself */ +#define SET_DEFAULT 0x40 +#define SET_DEFAULT_TYPE 0x20 + +#define SET_UART_FORMAT 0x40 +#define SET_UART_FORMAT_TYPE 0x21 +#define SET_UART_FORMAT_SIZE_5 0x00 +#define SET_UART_FORMAT_SIZE_6 0x01 +#define SET_UART_FORMAT_SIZE_7 0x02 +#define SET_UART_FORMAT_SIZE_8 0x03 +#define SET_UART_FORMAT_STOP_1 0x00 +#define SET_UART_FORMAT_STOP_2 0x04 +#define SET_UART_FORMAT_PAR_NONE 0x00 +#define SET_UART_FORMAT_PAR_ODD 0x10 +#define SET_UART_FORMAT_PAR_EVEN 0x30 +#define SET_UART_FORMAT_PAR_MASK 0xD0 +#define SET_UART_FORMAT_PAR_SPACE 0x90 + +#define GET_UART_STATUS_TYPE 0xc0 +#define GET_UART_STATUS 0x22 +#define GET_UART_STATUS_MSR 0x06 + +#define SET_UART_STATUS 0x40 +#define SET_UART_STATUS_TYPE 0x23 +#define SET_UART_STATUS_MCR 0x0004 +#define SET_UART_STATUS_MCR_DTR 0x01 +#define SET_UART_STATUS_MCR_RTS 0x02 +#define SET_UART_STATUS_MCR_LOOP 0x10 + +#define SET_WORKING_MODE 0x40 +#define SET_WORKING_MODE_TYPE 0x24 +#define SET_WORKING_MODE_U2C 0x00 +#define SET_WORKING_MODE_RS485 0x01 +#define SET_WORKING_MODE_PDMA 0x02 +#define SET_WORKING_MODE_SPP 0x03 + +#define SET_FLOWCTL_CHAR 0x40 +#define SET_FLOWCTL_CHAR_TYPE 0x25 + +#define GET_VERSION 0xc0 +#define GET_VERSION_TYPE 0x26 + +#define SET_REGISTER 0x40 +#define SET_REGISTER_TYPE 0x27 + +#define GET_REGISTER 0xc0 +#define GET_REGISTER_TYPE 0x28 + +#define SET_RAM 0x40 +#define SET_RAM_TYPE 0x31 + +#define GET_RAM 0xc0 +#define GET_RAM_TYPE 0x32 + +/* how come ??? */ +#define UART_STATE 0x08 +#define UART_STATE_TRANSIENT_MASK 0x74 +#define UART_DCD 0x01 +#define UART_DSR 0x02 +#define UART_BREAK_ERROR 0x04 +#define UART_RING 0x08 +#define UART_FRAME_ERROR 0x10 +#define UART_PARITY_ERROR 0x20 +#define UART_OVERRUN_ERROR 0x40 +#define UART_CTS 0x80 + +enum spcp8x5_type { + SPCP825_007_TYPE, + SPCP825_008_TYPE, + SPCP825_PHILIP_TYPE, + SPCP825_INTERMATIC_TYPE, + SPCP835_TYPE, +}; + +/* 1st in 1st out buffer 4 driver */ +struct ringbuf { + unsigned int buf_size; + char *buf_buf; + char *buf_get; + char *buf_put; +}; + +/* alloc the ring buf and alloc the buffer itself */ +static inline struct ringbuf *alloc_ringbuf(unsigned int size) +{ + struct ringbuf *pb; + + if (size == 0) + return NULL; + + pb = kmalloc(sizeof(*pb), GFP_KERNEL); + if (pb == NULL) + return NULL; + + pb->buf_buf = kmalloc(size, GFP_KERNEL); + if (pb->buf_buf == NULL) { + kfree(pb); + return NULL; + } + + pb->buf_size = size; + pb->buf_get = pb->buf_put = pb->buf_buf; + + return pb; +} + +/* free the ring buf and the buffer itself */ +static inline void free_ringbuf(struct ringbuf *pb) +{ + if (pb != NULL) { + kfree(pb->buf_buf); + kfree(pb); + } +} + +/* clear pipo , juest repoint the pointer here */ +static inline void clear_ringbuf(struct ringbuf *pb) +{ + if (pb != NULL) + pb->buf_get = pb->buf_put; +} + +/* get the number of data in the pipo */ +static inline unsigned int ringbuf_avail_data(struct ringbuf *pb) +{ + if (pb == NULL) + return 0; + return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); +} + +/* get the number of space in the pipo */ +static inline unsigned int ringbuf_avail_space(struct ringbuf *pb) +{ + if (pb == NULL) + return 0; + return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); +} + +/* put count data into pipo */ +static unsigned int put_ringbuf(struct ringbuf *pb, const char *buf, + unsigned int count) +{ + unsigned int len; + + if (pb == NULL) + return 0; + + len = ringbuf_avail_space(pb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = pb->buf_buf + pb->buf_size - pb->buf_put; + if (count > len) { + memcpy(pb->buf_put, buf, len); + memcpy(pb->buf_buf, buf+len, count - len); + pb->buf_put = pb->buf_buf + count - len; + } else { + memcpy(pb->buf_put, buf, count); + if (count < len) + pb->buf_put += count; + else /* count == len */ + pb->buf_put = pb->buf_buf; + } + return count; +} + +/* get count data from pipo */ +static unsigned int get_ringbuf(struct ringbuf *pb, char *buf, + unsigned int count) +{ + unsigned int len; + + if (pb == NULL || buf == NULL) + return 0; + + len = ringbuf_avail_data(pb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = pb->buf_buf + pb->buf_size - pb->buf_get; + if (count > len) { + memcpy(buf, pb->buf_get, len); + memcpy(buf+len, pb->buf_buf, count - len); + pb->buf_get = pb->buf_buf + count - len; + } else { + memcpy(buf, pb->buf_get, count); + if (count < len) + pb->buf_get += count; + else /* count == len */ + pb->buf_get = pb->buf_buf; + } + + return count; +} + +static struct usb_driver spcp8x5_driver = { + .name = "spcp8x5", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + + +struct spcp8x5_private { + spinlock_t lock; + struct ringbuf *buf; + int write_urb_in_use; + enum spcp8x5_type type; + wait_queue_head_t delta_msr_wait; + u8 line_control; + u8 line_status; + u8 termios_initialized; +}; + +/* desc : when device plug in,this function would be called. + * thanks to usb_serial subsystem,then do almost every things for us. And what + * we should do just alloc the buffer */ +static int spcp8x5_startup(struct usb_serial *serial) +{ + struct spcp8x5_private *priv; + int i; + enum spcp8x5_type type = SPCP825_007_TYPE; + + if (serial->dev->descriptor.idProduct == 0x0201) + type = SPCP825_007_TYPE; + else if (serial->dev->descriptor.idProduct == 0x0231) + type = SPCP835_TYPE; + else if (serial->dev->descriptor.idProduct == 0x0235) + type = SPCP825_008_TYPE; + else if (serial->dev->descriptor.idProduct == 0x0204) + type = SPCP825_INTERMATIC_TYPE; + else if (serial->dev->descriptor.idProduct == 0x0471 && + serial->dev->descriptor.idVendor == 0x081e) + type = SPCP825_PHILIP_TYPE; + dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type); + + for (i = 0; i < serial->num_ports; ++i) { + priv = kzalloc(sizeof(struct spcp8x5_private), GFP_KERNEL); + if (!priv) + goto cleanup; + + spin_lock_init(&priv->lock); + priv->buf = alloc_ringbuf(SPCP8x5_BUF_SIZE); + if (priv->buf == NULL) + goto cleanup2; + + init_waitqueue_head(&priv->delta_msr_wait); + priv->type = type; + usb_set_serial_port_data(serial->port[i] , priv); + + } + + return 0; + +cleanup2: + kfree(priv); +cleanup: + for (--i; i >= 0; --i) { + priv = usb_get_serial_port_data(serial->port[i]); + free_ringbuf(priv->buf); + kfree(priv); + usb_set_serial_port_data(serial->port[i] , NULL); + } + return -ENOMEM; +} + +/* call when the device plug out. free all the memory alloced by probe */ +static void spcp8x5_shutdown(struct usb_serial *serial) +{ + int i; + struct spcp8x5_private *priv; + + for (i = 0; i < serial->num_ports; i++) { + priv = usb_get_serial_port_data(serial->port[i]); + if (priv) { + free_ringbuf(priv->buf); + kfree(priv); + usb_set_serial_port_data(serial->port[i] , NULL); + } + } +} + +/* set the modem control line of the device. + * NOTE spcp825-007 not supported this */ +static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value, + enum spcp8x5_type type) +{ + int retval; + u8 mcr = 0 ; + + if (type == SPCP825_007_TYPE) + return -EPERM; + + mcr = (unsigned short)value; + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + SET_UART_STATUS_TYPE, SET_UART_STATUS, + mcr, 0x04, NULL, 0, 100); + if (retval != 0) + dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval); + return retval; +} + +/* get the modem status register of the device + * NOTE spcp825-007 not supported this */ +static int spcp8x5_get_msr(struct usb_device *dev, u8 *status, + enum spcp8x5_type type) +{ + u8 *status_buffer; + int ret; + + /* I return Permited not support here but seem inval device + * is more fix */ + if (type == SPCP825_007_TYPE) + return -EPERM; + if (status == NULL) + return -EINVAL; + + status_buffer = kmalloc(1, GFP_KERNEL); + if (!status_buffer) + return -ENOMEM; + status_buffer[0] = status[0]; + + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + GET_UART_STATUS, GET_UART_STATUS_TYPE, + 0, GET_UART_STATUS_MSR, status_buffer, 1, 100); + if (ret < 0) + dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)", + status_buffer, ret); + + dev_dbg(&dev->dev, "0xc0:0x22:0:6 %d - 0x%p ", ret, status_buffer); + status[0] = status_buffer[0]; + kfree(status_buffer); + + return ret; +} + +/* select the work mode. + * NOTE this function not supported by spcp825-007 */ +static void spcp8x5_set_workMode(struct usb_device *dev, u16 value, + u16 index, enum spcp8x5_type type) +{ + int ret; + + /* I return Permited not support here but seem inval device + * is more fix */ + if (type == SPCP825_007_TYPE) + return; + + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + SET_WORKING_MODE_TYPE, SET_WORKING_MODE, + value, index, NULL, 0, 100); + dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index); + if (ret < 0) + dev_dbg(&dev->dev, + "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret); +} + +/* close the serial port. We should wait for data sending to device 1st and + * then kill all urb. */ +static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int c_cflag; + int bps; + long timeout; + wait_queue_t wait; + int result; + + dbg("%s - port %d", __func__, port->number); + + /* wait for data to drain from the buffer */ + spin_lock_irqsave(&priv->lock, flags); + timeout = SPCP8x5_CLOSING_WAIT; + init_waitqueue_entry(&wait, current); + add_wait_queue(&port->tty->write_wait, &wait); + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); + if (ringbuf_avail_data(priv->buf) == 0 || + timeout == 0 || signal_pending(current)) + break; + spin_unlock_irqrestore(&priv->lock, flags); + timeout = schedule_timeout(timeout); + spin_lock_irqsave(&priv->lock, flags); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->tty->write_wait, &wait); + + /* clear out any remaining data in the buffer */ + clear_ringbuf(priv->buf); + spin_unlock_irqrestore(&priv->lock, flags); + + /* wait for characters to drain from the device (this is long enough + * for the entire all byte spcp8x5 hardware buffer to drain with no + * flow control for data rates of 1200 bps or more, for lower rates we + * should really know how much data is in the buffer to compute a delay + * that is not unnecessarily long) */ + bps = tty_get_baud_rate(port->tty); + if (bps > 1200) + timeout = max((HZ*2560) / bps, HZ/10); + else + timeout = 2*HZ; + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(timeout); + + /* clear control lines */ + if (port->tty) { + c_cflag = port->tty->termios->c_cflag; + if (c_cflag & HUPCL) { + spin_lock_irqsave(&priv->lock, flags); + priv->line_control = 0; + spin_unlock_irqrestore(&priv->lock, flags); + spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type); + } + } + + /* kill urb */ + if (port->write_urb != NULL) { + result = usb_unlink_urb(port->write_urb); + if (result) + dev_dbg(&port->dev, + "usb_unlink_urb(write_urb) = %d\n", result); + } + result = usb_unlink_urb(port->read_urb); + if (result) + dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result); +} + +/* set the serial param for transfer. we should check if we really need to + * transfer. then if be set flow contorl we should do this too. */ +static void spcp8x5_set_termios(struct usb_serial_port *port, + struct ktermios *old_termios) +{ + struct usb_serial *serial = port->serial; + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int cflag = port->tty->termios->c_cflag; + unsigned int old_cflag = old_termios->c_cflag; + unsigned short uartdata; + unsigned char buf[2] = {0, 0}; + int baud; + int i; + u8 control; + + if ((!port->tty) || (!port->tty->termios)) + return; + + /* for the 1st time call this function */ + spin_lock_irqsave(&priv->lock, flags); + if (!priv->termios_initialized) { + *(port->tty->termios) = tty_std_termios; + port->tty->termios->c_cflag = B115200 | CS8 | CREAD | + HUPCL | CLOCAL; + priv->termios_initialized = 1; + } + spin_unlock_irqrestore(&priv->lock, flags); + + /* check that they really want us to change something */ + if (!tty_termios_hw_change(port->tty->termios, old_termios)) + return; + + /* set DTR/RTS active */ + spin_lock_irqsave(&priv->lock, flags); + control = priv->line_control; + if ((old_cflag & CBAUD) == B0) { + priv->line_control |= MCR_DTR; + if (!(old_cflag & CRTSCTS)) + priv->line_control |= MCR_RTS; + } + if (control != priv->line_control) { + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + spcp8x5_set_ctrlLine(serial->dev, control , priv->type); + } else { + spin_unlock_irqrestore(&priv->lock, flags); + } + + /* Set Baud Rate */ + baud = tty_get_baud_rate(port->tty);; + switch (baud) { + case 300: buf[0] = 0x00; break; + case 600: buf[0] = 0x01; break; + case 1200: buf[0] = 0x02; break; + case 2400: buf[0] = 0x03; break; + case 4800: buf[0] = 0x04; break; + case 9600: buf[0] = 0x05; break; + case 19200: buf[0] = 0x07; break; + case 38400: buf[0] = 0x09; break; + case 57600: buf[0] = 0x0a; break; + case 115200: buf[0] = 0x0b; break; + case 230400: buf[0] = 0x0c; break; + case 460800: buf[0] = 0x0d; break; + case 921600: buf[0] = 0x0e; break; +/* case 1200000: buf[0] = 0x0f; break; */ +/* case 2400000: buf[0] = 0x10; break; */ + case 3000000: buf[0] = 0x11; break; +/* case 6000000: buf[0] = 0x12; break; */ + case 0: + case 1000000: + buf[0] = 0x0b; break; + default: + err("spcp825 driver does not support the baudrate " + "requested, using default of 9600."); + } + + /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ + if (cflag & CSIZE) { + switch (cflag & CSIZE) { + case CS5: + buf[1] |= SET_UART_FORMAT_SIZE_5; + break; + case CS6: + buf[1] |= SET_UART_FORMAT_SIZE_6; + break; + case CS7: + buf[1] |= SET_UART_FORMAT_SIZE_7; + break; + default: + case CS8: + buf[1] |= SET_UART_FORMAT_SIZE_8; + break; + } + } + + /* Set Stop bit2 : 0:1bit 1:2bit */ + buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 : + SET_UART_FORMAT_STOP_1; + + /* Set Parity bit3-4 01:Odd 11:Even */ + if (cflag & PARENB) { + buf[1] |= (cflag & PARODD) ? + SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ; + } else + buf[1] |= SET_UART_FORMAT_PAR_NONE; + + uartdata = buf[0] | buf[1]<<8; + + i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + SET_UART_FORMAT_TYPE, SET_UART_FORMAT, + uartdata, 0, NULL, 0, 100); + if (i < 0) + err("Set UART format %#x failed (error = %d)", uartdata, i); + dbg("0x21:0x40:0:0 %d\n", i); + + if (cflag & CRTSCTS) { + /* enable hardware flow control */ + spcp8x5_set_workMode(serial->dev, 0x000a, + SET_WORKING_MODE_U2C, priv->type); + } + return; +} + +/* open the serial port. do some usb system call. set termios and get the line + * status of the device. then submit the read urb */ +static int spcp8x5_open(struct usb_serial_port *port, struct file *filp) +{ + struct ktermios tmp_termios; + struct usb_serial *serial = port->serial; + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + int ret; + unsigned long flags; + u8 status = 0x30; + /* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */ + + dbg("%s - port %d", __func__, port->number); + + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + + ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + 0x09, 0x00, + 0x01, 0x00, NULL, 0x00, 100); + if (ret) + return ret; + + spin_lock_irqsave(&priv->lock, flags); + if (port->tty->termios->c_cflag & CBAUD) + priv->line_control = MCR_DTR | MCR_RTS; + else + priv->line_control = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type); + + /* Setup termios */ + if (port->tty) + spcp8x5_set_termios(port, &tmp_termios); + + spcp8x5_get_msr(serial->dev, &status, priv->type); + + /* may be we should update uart status here but now we did not do */ + spin_lock_irqsave(&priv->lock, flags); + priv->line_status = status & 0xf0 ; + spin_unlock_irqrestore(&priv->lock, flags); + + /* FIXME: need to assert RTS and DTR if CRTSCTS off */ + + dbg("%s - submitting read urb", __func__); + port->read_urb->dev = serial->dev; + ret = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (ret) { + spcp8x5_close(port, NULL); + return -EPROTO; + } + return 0; +} + +/* bulk read call back function. check the status of the urb. if transfer + * failed return. then update the status and the tty send data to tty subsys. + * submit urb again. + */ +static void spcp8x5_read_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + struct tty_struct *tty; + unsigned char *data = urb->transfer_buffer; + unsigned long flags; + int i; + int result; + u8 status = 0; + char tty_flag; + + dev_dbg(&port->dev, "start, urb->status = %d, " + "urb->actual_length = %d\n,", urb->status, urb->actual_length); + + /* check the urb status */ + if (urb->status) { + if (!port->open_count) + return; + if (urb->status == -EPROTO) { + /* spcp8x5 mysteriously fails with -EPROTO */ + /* reschedule the read */ + urb->status = 0; + urb->dev = port->serial->dev; + result = usb_submit_urb(urb , GFP_ATOMIC); + if (result) + dev_dbg(&port->dev, + "failed submitting read urb %d\n", + result); + return; + } + dev_dbg(&port->dev, "unable to handle the error, exiting.\n"); + return; + } + + /* get tty_flag from status */ + tty_flag = TTY_NORMAL; + + spin_lock_irqsave(&priv->lock, flags); + status = priv->line_status; + priv->line_status &= ~UART_STATE_TRANSIENT_MASK; + spin_unlock_irqrestore(&priv->lock, flags); + /* wake up the wait for termios */ + wake_up_interruptible(&priv->delta_msr_wait); + + /* break takes precedence over parity, which takes precedence over + * framing errors */ + if (status & UART_BREAK_ERROR) + tty_flag = TTY_BREAK; + else if (status & UART_PARITY_ERROR) + tty_flag = TTY_PARITY; + else if (status & UART_FRAME_ERROR) + tty_flag = TTY_FRAME; + dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag); + + tty = port->tty; + if (tty && urb->actual_length) { + tty_buffer_request_room(tty, urb->actual_length + 1); + /* overrun is special, not associated with a char */ + if (status & UART_OVERRUN_ERROR) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + for (i = 0; i < urb->actual_length; ++i) + tty_insert_flip_char(tty, data[i], tty_flag); + tty_flip_buffer_push(tty); + } + + /* Schedule the next read _if_ we are still open */ + if (port->open_count) { + urb->dev = port->serial->dev; + result = usb_submit_urb(urb , GFP_ATOMIC); + if (result) + dev_dbg(&port->dev, "failed submitting read urb %d\n", + result); + } + + return; +} + +/* get data from ring buffer and then write to usb bus */ +static void spcp8x5_send(struct usb_serial_port *port) +{ + int count, result; + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + if (priv->write_urb_in_use) { + dev_dbg(&port->dev, "write urb still used\n"); + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + + /* send the 1st urb for writting */ + memset(port->write_urb->transfer_buffer , 0x00 , port->bulk_out_size); + count = get_ringbuf(priv->buf, port->write_urb->transfer_buffer, + port->bulk_out_size); + + if (count == 0) { + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + + /* update the urb status */ + priv->write_urb_in_use = 1; + + spin_unlock_irqrestore(&priv->lock, flags); + + port->write_urb->transfer_buffer_length = count; + port->write_urb->dev = port->serial->dev; + + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (result) { + dev_dbg(&port->dev, "failed submitting write urb, error %d\n", + result); + priv->write_urb_in_use = 0; + /* TODO: reschedule spcp8x5_send */ + } + + + schedule_work(&port->work); +} + +/* this is the call back function for write urb. NOTE we should not sleep in + * this routine. check the urb return code and then submit the write urb again + * to hold the write loop */ +static void spcp8x5_write_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + int result; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "urb shutting down with status: %d\n", + urb->status); + priv->write_urb_in_use = 0; + return; + default: + /* error in the urb, so we have to resubmit it */ + dbg("%s - Overflow in write", __func__); + dbg("%s - nonzero write bulk status received: %d", + __func__, urb->status); + port->write_urb->transfer_buffer_length = 1; + port->write_urb->dev = port->serial->dev; + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (result) + dev_dbg(&port->dev, + "failed resubmitting write urb %d\n", result); + else + return; + } + + priv->write_urb_in_use = 0; + + /* send any buffered data */ + spcp8x5_send(port); +} + +/* write data to ring buffer. and then start the write transfer */ +static int spcp8x5_write(struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + dev_dbg(&port->dev, "%d bytes\n", count); + + if (!count) + return count; + + spin_lock_irqsave(&priv->lock, flags); + count = put_ringbuf(priv->buf, buf, count); + spin_unlock_irqrestore(&priv->lock, flags); + + spcp8x5_send(port); + + return count; +} + +static int spcp8x5_wait_modem_info(struct usb_serial_port *port, + unsigned int arg) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int prevstatus; + unsigned int status; + unsigned int changed; + + spin_lock_irqsave(&priv->lock, flags); + prevstatus = priv->line_status; + spin_unlock_irqrestore(&priv->lock, flags); + + while (1) { + /* wake up in bulk read */ + interruptible_sleep_on(&priv->delta_msr_wait); + + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + + spin_lock_irqsave(&priv->lock, flags); + status = priv->line_status; + spin_unlock_irqrestore(&priv->lock, flags); + + changed = prevstatus^status; + + if (((arg & TIOCM_RNG) && (changed & MSR_STATUS_LINE_RI)) || + ((arg & TIOCM_DSR) && (changed & MSR_STATUS_LINE_DSR)) || + ((arg & TIOCM_CD) && (changed & MSR_STATUS_LINE_DCD)) || + ((arg & TIOCM_CTS) && (changed & MSR_STATUS_LINE_CTS))) + return 0; + + prevstatus = status; + } + /* NOTREACHED */ + return 0; +} + +static int spcp8x5_ioctl(struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) +{ + dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); + + switch (cmd) { + case TIOCMIWAIT: + dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + return spcp8x5_wait_modem_info(port, arg); + + default: + dbg("%s not supported = 0x%04x", __func__, cmd); + break; + } + + return -ENOIOCTLCMD; +} + +static int spcp8x5_tiocmset(struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + if (set & TIOCM_RTS) + priv->line_control |= MCR_RTS; + if (set & TIOCM_DTR) + priv->line_control |= MCR_DTR; + if (clear & TIOCM_RTS) + priv->line_control &= ~MCR_RTS; + if (clear & TIOCM_DTR) + priv->line_control &= ~MCR_DTR; + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + + return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); +} + +static int spcp8x5_tiocmget(struct usb_serial_port *port, struct file *file) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int mcr; + unsigned int status; + unsigned int result; + + spin_lock_irqsave(&priv->lock, flags); + mcr = priv->line_control; + status = priv->line_status; + spin_unlock_irqrestore(&priv->lock, flags); + + result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) + | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) + | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0) + | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0) + | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0) + | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0); + + return result; +} + +/* get the avail space room in ring buffer */ +static int spcp8x5_write_room(struct usb_serial_port *port) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + int room = 0; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + room = ringbuf_avail_space(priv->buf); + spin_unlock_irqrestore(&priv->lock, flags); + + return room; +} + +/* get the number of avail data in write ring buffer */ +static int spcp8x5_chars_in_buffer(struct usb_serial_port *port) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + int chars = 0; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + chars = ringbuf_avail_data(priv->buf); + spin_unlock_irqrestore(&priv->lock, flags); + + return chars; +} + +/* All of the device info needed for the spcp8x5 SIO serial converter */ +static struct usb_serial_driver spcp8x5_device = { + .driver = { + .owner = THIS_MODULE, + .name = "SPCP8x5", + }, + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .open = spcp8x5_open, + .close = spcp8x5_close, + .write = spcp8x5_write, + .set_termios = spcp8x5_set_termios, + .ioctl = spcp8x5_ioctl, + .tiocmget = spcp8x5_tiocmget, + .tiocmset = spcp8x5_tiocmset, + .write_room = spcp8x5_write_room, + .read_bulk_callback = spcp8x5_read_bulk_callback, + .write_bulk_callback = spcp8x5_write_bulk_callback, + .chars_in_buffer = spcp8x5_chars_in_buffer, + .attach = spcp8x5_startup, + .shutdown = spcp8x5_shutdown, +}; + +static int __init spcp8x5_init(void) +{ + int retval; + retval = usb_serial_register(&spcp8x5_device); + if (retval) + goto failed_usb_serial_register; + retval = usb_register(&spcp8x5_driver); + if (retval) + goto failed_usb_register; + info(DRIVER_DESC " " DRIVER_VERSION); + return 0; +failed_usb_register: + usb_serial_deregister(&spcp8x5_device); +failed_usb_serial_register: + return retval; +} + +static void __exit spcp8x5_exit(void) +{ + usb_deregister(&spcp8x5_driver); + usb_serial_deregister(&spcp8x5_device); +} + +module_init(spcp8x5_init); +module_exit(spcp8x5_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); |