aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/mfd/Kconfig16
-rw-r--r--drivers/mfd/wm8350-core.c86
-rw-r--r--drivers/mfd/wm8350-i2c.c1
-rw-r--r--drivers/mfd/wm8350-regmap.c1052
-rw-r--r--include/linux/mfd/wm8350/core.h4
5 files changed, 1143 insertions, 16 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ddfb12b52f5..76a482dfc17 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -143,6 +143,22 @@ config MFD_WM8350_CONFIG_MODE_3
bool
depends on MFD_WM8350
+config MFD_WM8352_CONFIG_MODE_0
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_1
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_2
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_3
+ bool
+ depends on MFD_WM8350
+
config MFD_WM8350_I2C
tristate "Support Wolfson Microelectronics WM8350 with I2C"
select MFD_WM8350
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 2188d759cbd..fa505ac76c8 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -1133,35 +1133,75 @@ EXPORT_SYMBOL_GPL(wm8350_read_auxadc);
/*
* Cache is always host endian.
*/
-static int wm8350_create_cache(struct wm8350 *wm8350, int mode)
+static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
{
int i, ret = 0;
u16 value;
const u16 *reg_map;
- switch (mode) {
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
+ switch (type) {
case 0:
- reg_map = wm8350_mode0_defaults;
- break;
+ switch (mode) {
+#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
+ case 0:
+ reg_map = wm8350_mode0_defaults;
+ break;
#endif
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
- case 1:
- reg_map = wm8350_mode1_defaults;
- break;
+ case 1:
+ reg_map = wm8350_mode1_defaults;
+ break;
#endif
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
- case 2:
- reg_map = wm8350_mode2_defaults;
- break;
+ case 2:
+ reg_map = wm8350_mode2_defaults;
+ break;
#endif
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
- case 3:
- reg_map = wm8350_mode3_defaults;
- break;
+ case 3:
+ reg_map = wm8350_mode3_defaults;
+ break;
#endif
+ default:
+ dev_err(wm8350->dev,
+ "WM8350 configuration mode %d not supported\n",
+ mode);
+ return -EINVAL;
+ }
+
+ case 2:
+ switch (mode) {
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
+ case 0:
+ reg_map = wm8352_mode0_defaults;
+ break;
+#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
+ case 1:
+ reg_map = wm8352_mode1_defaults;
+ break;
+#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
+ case 2:
+ reg_map = wm8352_mode2_defaults;
+ break;
+#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
+ case 3:
+ reg_map = wm8352_mode3_defaults;
+ break;
+#endif
+ default:
+ dev_err(wm8350->dev,
+ "WM8352 configuration mode %d not supported\n",
+ mode);
+ return -EINVAL;
+ }
+ break;
+
default:
- dev_err(wm8350->dev, "Configuration mode %d not supported\n",
+ dev_err(wm8350->dev,
+ "WM835x configuration mode %d not supported\n",
mode);
return -EINVAL;
}
@@ -1284,13 +1324,27 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
}
break;
+ case 2:
+ switch (chip_rev) {
+ case 0:
+ dev_info(wm8350->dev, "WM8352 Rev A\n");
+ wm8350->power.rev_g_coeff = 1;
+ break;
+
+ default:
+ dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n");
+ ret = -ENODEV;
+ goto err;
+ }
+ break;
+
default:
dev_err(wm8350->dev, "Unknown MASK_REV\n");
ret = -ENODEV;
goto err;
}
- ret = wm8350_create_cache(wm8350, mode);
+ ret = wm8350_create_cache(wm8350, mask_rev, mode);
if (ret < 0) {
dev_err(wm8350->dev, "Failed to create register cache\n");
return ret;
diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c
index 876e693582b..87805125308 100644
--- a/drivers/mfd/wm8350-i2c.c
+++ b/drivers/mfd/wm8350-i2c.c
@@ -97,6 +97,7 @@ static int wm8350_i2c_remove(struct i2c_client *i2c)
static const struct i2c_device_id wm8350_i2c_id[] = {
{ "wm8350", 0 },
+ { "wm8352", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8350_i2c_id);
diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
index b43d64c2b92..3e2cc37961f 100644
--- a/drivers/mfd/wm8350-regmap.c
+++ b/drivers/mfd/wm8350-regmap.c
@@ -1074,6 +1074,1058 @@ const u16 wm8350_mode3_defaults[] = {
};
#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8352_mode0_defaults[] = {
+ 0x6143, /* R0 - Reset/ID */
+ 0x0000, /* R1 - ID */
+ 0x0002, /* R2 - Revision */
+ 0x1C02, /* R3 - System Control 1 */
+ 0x0004, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3A00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - OUT1L Volume */
+ 0x00E4, /* R105 - OUT1R Volume */
+ 0x00E4, /* R106 - OUT2L Volume */
+ 0x02E4, /* R107 - OUT2R Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x0000, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x0FFC, /* R134 - GPIO Configuration (i/o) */
+ 0x0FFC, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0013, /* R140 - GPIO Function Select 1 */
+ 0x0000, /* R141 - GPIO Function Select 2 */
+ 0x0000, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 - Current Sink Driver B */
+ 0x0000, /* R175 - CSB Flash control */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x032D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x000E, /* R180 - DCDC1 Control */
+ 0x0000, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0000, /* R186 - DCDC3 Control */
+ 0x0000, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x0000, /* R189 - DCDC4 Control */
+ 0x0000, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 - DCDC5 Control */
+ 0x0000, /* R193 - DCDC5 Timeouts */
+ 0x0000, /* R194 */
+ 0x0000, /* R195 - DCDC6 Control */
+ 0x0000, /* R196 - DCDC6 Timeouts */
+ 0x0006, /* R197 - DCDC6 Low Power */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x001C, /* R200 - LDO1 Control */
+ 0x0000, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x001B, /* R203 - LDO2 Control */
+ 0x0000, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x001B, /* R206 - LDO3 Control */
+ 0x0000, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001B, /* R209 - LDO4 Control */
+ 0x0000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 - Security1 */
+ 0x4000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 - Signal overrides */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 - Charger Overides/status */
+ 0x0000, /* R227 - misc overrides */
+ 0x0000, /* R228 - Supply overrides/status 1 */
+ 0x0000, /* R229 - Supply overrides/status 2 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 - comparotor overrides */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 - State Machine status */
+ 0x1200, /* R234 */
+ 0x0000, /* R235 */
+ 0x8000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0003, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0004, /* R243 */
+ 0x0300, /* R244 */
+ 0x0000, /* R245 */
+ 0x0200, /* R246 */
+ 0x0000, /* R247 */
+ 0x1000, /* R248 - DCDC1 Test Controls */
+ 0x5000, /* R249 */
+ 0x1000, /* R250 - DCDC3 Test Controls */
+ 0x1000, /* R251 - DCDC4 Test Controls */
+ 0x5100, /* R252 */
+ 0x1000, /* R253 - DCDC6 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8352_mode1_defaults[] = {
+ 0x6143, /* R0 - Reset/ID */
+ 0x0000, /* R1 - ID */
+ 0x0002, /* R2 - Revision */
+ 0x1C02, /* R3 - System Control 1 */
+ 0x0204, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3A00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - OUT1L Volume */
+ 0x00E4, /* R105 - OUT1R Volume */
+ 0x00E4, /* R106 - OUT2L Volume */
+ 0x02E4, /* R107 - OUT2R Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x0000, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x0BFB, /* R134 - GPIO Configuration (i/o) */
+ 0x0FFF, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0300, /* R140 - GPIO Function Select 1 */
+ 0x0000, /* R141 - GPIO Function Select 2 */
+ 0x2300, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 - Current Sink Driver B */
+ 0x0000, /* R175 - CSB Flash control */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x032D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x0062, /* R180 - DCDC1 Control */
+ 0x0400, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0006, /* R186 - DCDC3 Control */
+ 0x0800, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x0006, /* R189 - DCDC4 Control */
+ 0x0C00, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 - DCDC5 Control */
+ 0x0000, /* R193 - DCDC5 Timeouts */
+ 0x0000, /* R194 */
+ 0x0026, /* R195 - DCDC6 Control */
+ 0x1000, /* R196 - DCDC6 Timeouts */
+ 0x0006, /* R197 - DCDC6 Low Power */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x0002, /* R200 - LDO1 Control */
+ 0x0000, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x001A, /* R203 - LDO2 Control */
+ 0x0000, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x001F, /* R206 - LDO3 Control */
+ 0x0000, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001F, /* R209 - LDO4 Control */
+ 0x0000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 - Security1 */
+ 0x4000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 - Signal overrides */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 - Charger Overides/status */
+ 0x0000, /* R227 - misc overrides */
+ 0x0000, /* R228 - Supply overrides/status 1 */
+ 0x0000, /* R229 - Supply overrides/status 2 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 - comparotor overrides */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 - State Machine status */
+ 0x1200, /* R234 */
+ 0x0000, /* R235 */
+ 0x8000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0003, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0004, /* R243 */
+ 0x0300, /* R244 */
+ 0x0000, /* R245 */
+ 0x0200, /* R246 */
+ 0x0000, /* R247 */
+ 0x1000, /* R248 - DCDC1 Test Controls */
+ 0x5000, /* R249 */
+ 0x1000, /* R250 - DCDC3 Test Controls */
+ 0x1000, /* R251 - DCDC4 Test Controls */
+ 0x5100, /* R252 */
+ 0x1000, /* R253 - DCDC6 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8352_mode2_defaults[] = {
+ 0x6143, /* R0 - Reset/ID */
+ 0x0000, /* R1 - ID */
+ 0x0002, /* R2 - Revision */
+ 0x1C02, /* R3 - System Control 1 */
+ 0x0204, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3A00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - OUT1L Volume */
+ 0x00E4, /* R105 - OUT1R Volume */
+ 0x00E4, /* R106 - OUT2L Volume */
+ 0x02E4, /* R107 - OUT2R Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x0110, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x09DA, /* R134 - GPIO Configuration (i/o) */
+ 0x0DD6, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x1310, /* R140 - GPIO Function Select 1 */
+ 0x0033, /* R141 - GPIO Function Select 2 */
+ 0x2000, /* R142 - GPIO Function Select 3 */
+ 0x0000, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 - Current Sink Driver B */
+ 0x0000, /* R175 - CSB Flash control */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x032D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x000E, /* R180 - DCDC1 Control */
+ 0x0800, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0056, /* R186 - DCDC3 Control */
+ 0x1800, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x000E, /* R189 - DCDC4 Control */
+ 0x1000, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 - DCDC5 Control */
+ 0x0000, /* R193 - DCDC5 Timeouts */
+ 0x0000, /* R194 */
+ 0x0026, /* R195 - DCDC6 Control */
+ 0x0C00, /* R196 - DCDC6 Timeouts */
+ 0x0006, /* R197 - DCDC6 Low Power */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x001C, /* R200 - LDO1 Control */
+ 0x0000, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x0006, /* R203 - LDO2 Control */
+ 0x0400, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x001C, /* R206 - LDO3 Control */
+ 0x1400, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001A, /* R209 - LDO4 Control */
+ 0x0000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 - Security1 */
+ 0x4000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 - Signal overrides */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 - Charger Overides/status */
+ 0x0000, /* R227 - misc overrides */
+ 0x0000, /* R228 - Supply overrides/status 1 */
+ 0x0000, /* R229 - Supply overrides/status 2 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 - comparotor overrides */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 - State Machine status */
+ 0x1200, /* R234 */
+ 0x0000, /* R235 */
+ 0x8000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0003, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0004, /* R243 */
+ 0x0300, /* R244 */
+ 0x0000, /* R245 */
+ 0x0200, /* R246 */
+ 0x0000, /* R247 */
+ 0x1000, /* R248 - DCDC1 Test Controls */
+ 0x5000, /* R249 */
+ 0x1000, /* R250 - DCDC3 Test Controls */
+ 0x1000, /* R251 - DCDC4 Test Controls */
+ 0x5100, /* R252 */
+ 0x1000, /* R253 - DCDC6 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8352_mode3_defaults[] = {
+ 0x6143, /* R0 - Reset/ID */
+ 0x0000, /* R1 - ID */
+ 0x0002, /* R2 - Revision */
+ 0x1C02, /* R3 - System Control 1 */
+ 0x0204, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3A00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - OUT1L Volume */
+ 0x00E4, /* R105 - OUT1R Volume */
+ 0x00E4, /* R106 - OUT2L Volume */
+ 0x02E4, /* R107 - OUT2R Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0010, /* R129 - GPIO Pin pull up Control */
+ 0x0000, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x0BFB, /* R134 - GPIO Configuration (i/o) */
+ 0x0FFD, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0310, /* R140 - GPIO Function Select 1 */
+ 0x0001, /* R141 - GPIO Function Select 2 */
+ 0x2300, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 - Current Sink Driver B */
+ 0x0000, /* R175 - CSB Flash control */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x032D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x0006, /* R180 - DCDC1 Control */
+ 0x0400, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0050, /* R186 - DCDC3 Control */
+ 0x0C00, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x000E, /* R189 - DCDC4 Control */
+ 0x0400, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 - DCDC5 Control */
+ 0x0000, /* R193 - DCDC5 Timeouts */
+ 0x0000, /* R194 */
+ 0x0029, /* R195 - DCDC6 Control */
+ 0x0800, /* R196 - DCDC6 Timeouts */
+ 0x0006, /* R197 - DCDC6 Low Power */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x001D, /* R200 - LDO1 Control */
+ 0x1000, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x0017, /* R203 - LDO2 Control */
+ 0x1000, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x0006, /* R206 - LDO3 Control */
+ 0x1000, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x0010, /* R209 - LDO4 Control */
+ 0x1000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 - Security1 */
+ 0x4000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 - Signal overrides */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 - Charger Overides/status */
+ 0x0000, /* R227 - misc overrides */
+ 0x0000, /* R228 - Supply overrides/status 1 */
+ 0x0000, /* R229 - Supply overrides/status 2 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 - comparotor overrides */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 - State Machine status */
+ 0x1200, /* R234 */
+ 0x0000, /* R235 */
+ 0x8000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0003, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0004, /* R243 */
+ 0x0300, /* R244 */
+ 0x0000, /* R245 */
+ 0x0200, /* R246 */
+ 0x0000, /* R247 */
+ 0x1000, /* R248 - DCDC1 Test Controls */
+ 0x5000, /* R249 */
+ 0x1000, /* R250 - DCDC3 Test Controls */
+ 0x1000, /* R251 - DCDC4 Test Controls */
+ 0x5100, /* R252 */
+ 0x1000, /* R253 - DCDC6 Test Controls */
+};
+#endif
+
/* The register defaults for the config mode used must be compiled in but
* due to the impact on kernel size it is possible to disable
*/
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
index afeff6f1316..737579086d0 100644
--- a/include/linux/mfd/wm8350/core.h
+++ b/include/linux/mfd/wm8350/core.h
@@ -589,6 +589,10 @@ extern const u16 wm8350_mode0_defaults[];
extern const u16 wm8350_mode1_defaults[];
extern const u16 wm8350_mode2_defaults[];
extern const u16 wm8350_mode3_defaults[];
+extern const u16 wm8352_mode0_defaults[];
+extern const u16 wm8352_mode1_defaults[];
+extern const u16 wm8352_mode2_defaults[];
+extern const u16 wm8352_mode3_defaults[];
struct wm8350;