aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/DocBook/mtdnand.tmpl5
-rw-r--r--drivers/mtd/Kconfig8
-rw-r--r--drivers/mtd/Makefile1
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0001.c38
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0002.c2
-rw-r--r--drivers/mtd/chips/jedec_probe.c37
-rw-r--r--drivers/mtd/devices/Kconfig25
-rw-r--r--drivers/mtd/devices/Makefile1
-rw-r--r--drivers/mtd/devices/at91_dataflash26.c485
-rw-r--r--drivers/mtd/devices/docprobe.c4
-rw-r--r--drivers/mtd/devices/m25p80.c271
-rw-r--r--drivers/mtd/devices/mtd_dataflash.c17
-rw-r--r--drivers/mtd/devices/pmc551.c27
-rw-r--r--drivers/mtd/inftlmount.c3
-rw-r--r--drivers/mtd/maps/Kconfig43
-rw-r--r--drivers/mtd/maps/Makefile6
-rw-r--r--drivers/mtd/maps/alchemy-flash.c14
-rw-r--r--drivers/mtd/maps/intel_vr_nor.c298
-rw-r--r--drivers/mtd/maps/lubbock-flash.c168
-rw-r--r--drivers/mtd/maps/mainstone-flash.c180
-rw-r--r--drivers/mtd/maps/nettel.c65
-rw-r--r--drivers/mtd/maps/ocelot.c175
-rw-r--r--drivers/mtd/maps/physmap_of.c1
-rw-r--r--drivers/mtd/maps/pmcmsp-flash.c22
-rw-r--r--drivers/mtd/maps/pmcmsp-ramroot.c1
-rw-r--r--drivers/mtd/maps/pq2fads.c88
-rw-r--r--drivers/mtd/maps/pxa2xx-flash.c200
-rw-r--r--drivers/mtd/maps/tqm834x.c286
-rw-r--r--drivers/mtd/mtd_blkdevs.c7
-rw-r--r--drivers/mtd/mtdchar.c3
-rw-r--r--drivers/mtd/mtdconcat.c2
-rw-r--r--drivers/mtd/mtdcore.c2
-rw-r--r--drivers/mtd/mtdcore.h11
-rw-r--r--drivers/mtd/mtdoops.c376
-rw-r--r--drivers/mtd/nand/Kconfig31
-rw-r--r--drivers/mtd/nand/Makefile2
-rw-r--r--drivers/mtd/nand/alauda.c742
-rw-r--r--drivers/mtd/nand/bf5xx_nand.c788
-rw-r--r--drivers/mtd/nand/cafe_nand.c51
-rw-r--r--drivers/mtd/nand/diskonchip.c2
-rw-r--r--drivers/mtd/nand/excite_nandflash.c1
-rw-r--r--drivers/mtd/nand/nand_base.c9
-rw-r--r--drivers/mtd/nand/nand_ids.c1
-rw-r--r--drivers/mtd/nand/nandsim.c8
-rw-r--r--drivers/mtd/nand/ndfc.c8
-rw-r--r--drivers/mtd/nand/s3c2410.c4
-rw-r--r--drivers/mtd/onenand/Kconfig23
-rw-r--r--drivers/mtd/onenand/Makefile3
-rw-r--r--drivers/mtd/onenand/onenand_base.c665
-rw-r--r--drivers/mtd/onenand/onenand_sim.c495
-rw-r--r--drivers/mtd/rfd_ftl.c8
-rw-r--r--drivers/mtd/ubi/scan.c17
-rw-r--r--fs/Kconfig81
-rw-r--r--fs/jffs2/Makefile1
-rw-r--r--fs/jffs2/acl.c23
-rw-r--r--fs/jffs2/acl.h4
-rw-r--r--fs/jffs2/background.c4
-rw-r--r--fs/jffs2/build.c10
-rw-r--r--fs/jffs2/compr.c422
-rw-r--r--fs/jffs2/compr.h54
-rw-r--r--fs/jffs2/compr_lzo.c108
-rw-r--r--fs/jffs2/compr_rtime.c2
-rw-r--r--fs/jffs2/compr_rubin.c4
-rw-r--r--fs/jffs2/compr_zlib.c6
-rw-r--r--fs/jffs2/dir.c37
-rw-r--r--fs/jffs2/erase.c57
-rw-r--r--fs/jffs2/fs.c32
-rw-r--r--fs/jffs2/gc.c23
-rw-r--r--fs/jffs2/jffs2_fs_sb.h5
-rw-r--r--fs/jffs2/nodelist.h2
-rw-r--r--fs/jffs2/nodemgmt.c25
-rw-r--r--fs/jffs2/os-linux.h5
-rw-r--r--fs/jffs2/readinode.c8
-rw-r--r--fs/jffs2/scan.c19
-rw-r--r--fs/jffs2/security.c6
-rw-r--r--fs/jffs2/summary.c30
-rw-r--r--fs/jffs2/summary.h6
-rw-r--r--fs/jffs2/wbuf.c81
-rw-r--r--fs/jffs2/write.c13
-rw-r--r--fs/jffs2/xattr.h2
-rw-r--r--fs/jffs2/xattr_user.c4
-rw-r--r--include/asm-blackfin/mach-bf548/dma.h1
-rw-r--r--include/asm-blackfin/nand.h47
-rw-r--r--include/linux/jffs2.h1
-rw-r--r--include/linux/mtd/cfi.h9
-rw-r--r--include/linux/mtd/flashchip.h1
-rw-r--r--include/linux/mtd/map.h10
-rw-r--r--include/linux/mtd/mtd.h7
-rw-r--r--include/linux/mtd/nand.h1
-rw-r--r--include/linux/mtd/onenand.h12
-rw-r--r--include/linux/mtd/onenand_regs.h4
91 files changed, 4671 insertions, 2226 deletions
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index a8c8cce5063..6fbc41d98c1 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -275,16 +275,13 @@ int __init board_init (void)
int err = 0;
/* Allocate memory for MTD device structure and private data */
- board_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip), GFP_KERNEL);
+ board_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!board_mtd) {
printk ("Unable to allocate NAND MTD device structure.\n");
err = -ENOMEM;
goto out;
}
- /* Initialize structures */
- memset ((char *) board_mtd, 0, sizeof(struct mtd_info) + sizeof(struct nand_chip));
-
/* map physical adress */
baseaddr = (unsigned long)ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
if(!baseaddr){
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index fbec8cd55e3..8848e8ac705 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -278,6 +278,14 @@ config SSFDC
This enables read only access to SmartMedia formatted NAND
flash. You can mount it with FAT file system.
+config MTD_OOPS
+ tristate "Log panic/oops to an MTD buffer"
+ depends on MTD
+ help
+ This enables panic and oops messages to be logged to a circular
+ buffer in a flash partition where it can be read back at some
+ later point.
+
source "drivers/mtd/chips/Kconfig"
source "drivers/mtd/maps/Kconfig"
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 6d958a4566f..7f0b04b4caa 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_NFTL) += nftl.o
obj-$(CONFIG_INFTL) += inftl.o
obj-$(CONFIG_RFD_FTL) += rfd_ftl.o
obj-$(CONFIG_SSFDC) += ssfdc.o
+obj-$(CONFIG_MTD_OOPS) += mtdoops.o
nftl-objs := nftlcore.o nftlmount.o
inftl-objs := inftlcore.o inftlmount.o
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 2f19fa78d24..3aa3dca56ae 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -526,7 +526,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
struct cfi_pri_intelext *extp = cfi->cmdset_priv;
/*
- * Probing of multi-partition flash ships.
+ * Probing of multi-partition flash chips.
*
* To support multiple partitions when available, we simply arrange
* for each of them to have their own flchip structure even if they
@@ -653,7 +653,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
resettime:
timeo = jiffies + HZ;
retry:
- if (chip->priv && (mode == FL_WRITING || mode == FL_ERASING || mode == FL_OTP_WRITE)) {
+ if (chip->priv && (mode == FL_WRITING || mode == FL_ERASING || mode == FL_OTP_WRITE || mode == FL_SHUTDOWN)) {
/*
* OK. We have possibility for contension on the write/erase
* operations which are global to the real chip and not per
@@ -798,6 +798,9 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
if (mode == FL_READY && chip->oldstate == FL_READY)
return 0;
+ case FL_SHUTDOWN:
+ /* The machine is rebooting now,so no one can get chip anymore */
+ return -EIO;
default:
sleep:
set_current_state(TASK_UNINTERRUPTIBLE);
@@ -1166,28 +1169,34 @@ static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, si
{
struct map_info *map = mtd->priv;
struct cfi_private *cfi = map->fldrv_priv;
- unsigned long ofs;
+ unsigned long ofs, last_end = 0;
int chipnum;
int ret = 0;
if (!map->virt || (from + len > mtd->size))
return -EINVAL;
- *mtdbuf = (void *)map->virt + from;
- *retlen = 0;
-
/* Now lock the chip(s) to POINT state */
/* ofs: offset within the first chip that the first read should start */
chipnum = (from >> cfi->chipshift);
ofs = from - (chipnum << cfi->chipshift);
+ *mtdbuf = (void *)map->virt + cfi->chips[chipnum].start + ofs;
+ *retlen = 0;
+
while (len) {
unsigned long thislen;
if (chipnum >= cfi->numchips)
break;
+ /* We cannot point across chips that are virtually disjoint */
+ if (!last_end)
+ last_end = cfi->chips[chipnum].start;
+ else if (cfi->chips[chipnum].start != last_end)
+ break;
+
if ((len + ofs -1) >> cfi->chipshift)
thislen = (1<<cfi->chipshift) - ofs;
else
@@ -1201,6 +1210,7 @@ static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, si
len -= thislen;
ofs = 0;
+ last_end += 1 << cfi->chipshift;
chipnum++;
}
return 0;
@@ -1780,7 +1790,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
return ret;
}
-int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
+static int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
{
unsigned long ofs, len;
int ret;
@@ -1930,7 +1940,7 @@ static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
__FUNCTION__, ofs, len);
cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
- ofs, len, 0);
+ ofs, len, NULL);
#endif
ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
@@ -1940,7 +1950,7 @@ static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
__FUNCTION__, ret);
cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
- ofs, len, 0);
+ ofs, len, NULL);
#endif
return ret;
@@ -1954,7 +1964,7 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
__FUNCTION__, ofs, len);
cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
- ofs, len, 0);
+ ofs, len, NULL);
#endif
ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
@@ -1964,7 +1974,7 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
__FUNCTION__, ret);
cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
- ofs, len, 0);
+ ofs, len, NULL);
#endif
return ret;
@@ -2255,7 +2265,7 @@ static void cfi_intelext_save_locks(struct mtd_info *mtd)
adr = region->offset + block * len;
status = cfi_varsize_frob(mtd,
- do_getlockstatus_oneblock, adr, len, 0);
+ do_getlockstatus_oneblock, adr, len, NULL);
if (status)
set_bit(block, region->lockmap);
else
@@ -2402,10 +2412,10 @@ static int cfi_intelext_reset(struct mtd_info *mtd)
and switch to array mode so any bootloader in
flash is accessible for soft reboot. */
spin_lock(chip->mutex);
- ret = get_chip(map, chip, chip->start, FL_SYNCING);
+ ret = get_chip(map, chip, chip->start, FL_SHUTDOWN);
if (!ret) {
map_write(map, CMD(0xff), chip->start);
- chip->state = FL_READY;
+ chip->state = FL_SHUTDOWN;
}
spin_unlock(chip->mutex);
}
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 1f644584046..389acc600f5 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1609,7 +1609,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
}
-int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
+static int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
{
unsigned long ofs, len;
int ret;
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 58e561e8769..a67b23b87fc 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -17,7 +17,6 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
-#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
@@ -70,6 +69,7 @@
/* Fujitsu */
#define MBM29F040C 0x00A4
+#define MBM29F800BA 0x2258
#define MBM29LV650UE 0x22D7
#define MBM29LV320TE 0x22F6
#define MBM29LV320BE 0x22F9
@@ -129,6 +129,7 @@
#define LH28F640BF 0x00b0
/* ST - www.st.com */
+#define M29F800AB 0x0058
#define M29W800DT 0x00D7
#define M29W800DB 0x005B
#define M29W160DT 0x22C4
@@ -646,6 +647,23 @@ static const struct amd_flash_info jedec_table[] = {
}
}, {
.mfr_id = MANUFACTURER_FUJITSU,
+ .dev_id = MBM29F800BA,
+ .name = "Fujitsu MBM29F800BA",
+ .uaddr = {
+ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
+ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */
+ },
+ .DevSize = SIZE_1MiB,
+ .CmdSet = P_ID_AMD_STD,
+ .NumEraseRegions= 4,
+ .regions = {
+ ERASEINFO(0x04000,1),
+ ERASEINFO(0x02000,2),
+ ERASEINFO(0x08000,1),
+ ERASEINFO(0x10000,15),
+ }
+ }, {
+ .mfr_id = MANUFACTURER_FUJITSU,
.dev_id = MBM29LV650UE,
.name = "Fujitsu MBM29LV650UE",
.uaddr = {
@@ -1510,6 +1528,23 @@ static const struct amd_flash_info jedec_table[] = {
ERASEINFO(0x1000,256)
}
+ }, {
+ .mfr_id = MANUFACTURER_ST,
+ .dev_id = M29F800AB,
+ .name = "ST M29F800AB",
+ .uaddr = {
+ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
+ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */
+ },
+ .DevSize = SIZE_1MiB,
+ .CmdSet = P_ID_AMD_STD,
+ .NumEraseRegions= 4,
+ .regions = {
+ ERASEINFO(0x04000,1),
+ ERASEINFO(0x02000,2),
+ ERASEINFO(0x08000,1),
+ ERASEINFO(0x10000,15),
+ }
}, {
.mfr_id = MANUFACTURER_ST, /* FIXME - CFI device? */
.dev_id = M29W800DT,
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index ff642f8fbee..811d56fd890 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -60,21 +60,22 @@ config MTD_DATAFLASH
Sometimes DataFlash chips are packaged inside MMC-format
cards; at this writing, the MMC stack won't handle those.
-config MTD_DATAFLASH26
- tristate "AT91RM9200 DataFlash AT26xxx"
- depends on MTD && ARCH_AT91RM9200 && AT91_SPI
- help
- This enables access to the DataFlash chip (AT26xxx) on an
- AT91RM9200-based board.
- If you have such a board and such a DataFlash, say 'Y'.
-
config MTD_M25P80
- tristate "Support for M25 SPI Flash"
+ tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
depends on SPI_MASTER && EXPERIMENTAL
help
- This enables access to ST M25P80 and similar SPI flash chips,
- used for program and data storage. Set up your spi devices
- with the right board-specific platform data.
+ This enables access to most modern SPI flash chips, used for
+ program and data storage. Series supported include Atmel AT26DF,
+ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
+ are supported as well. See the driver source for the current list,
+ or to add other chips.
+
+ Note that the original DataFlash chips (AT45 series, not AT26DF),
+ need an entirely different driver.
+
+ Set up your spi devices with the right board-specific platform data,
+ if you want to specify device partitioning or to use a device which
+ doesn't support the JEDEC ID instruction.
config MTD_SLRAM
tristate "Uncached system RAM"
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 8ab568b3f53..0f788d5c4bf 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,5 +16,4 @@ obj-$(CONFIG_MTD_MTDRAM) += mtdram.o
obj-$(CONFIG_MTD_LART) += lart.o
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
-obj-$(CONFIG_MTD_DATAFLASH26) += at91_dataflash26.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
diff --git a/drivers/mtd/devices/at91_dataflash26.c b/drivers/mtd/devices/at91_dataflash26.c
deleted file mode 100644
index 64ce37f986f..00000000000
--- a/drivers/mtd/devices/at91_dataflash26.c
+++ /dev/null
@@ -1,485 +0,0 @@
-/*
- * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
- * This is a largely modified version of at91_dataflash.c that
- * supports AT26xxx dataflash chips. The original driver supports
- * AT45xxx chips.
- *
- * Note: This driver was only tested with an AT26F004. It should be
- * easy to make it work with other AT26xxx dataflash devices, though.
- *
- * Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de>
- * original Copyright (C) SAN People (Pty) Ltd
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
-*/
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-
-#include <asm/arch/at91_spi.h>
-
-#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */
-
-#define MANUFACTURER_ID_ATMEL 0x1F
-
-/* command codes */
-
-#define AT26_OP_READ_STATUS 0x05
-#define AT26_OP_READ_DEV_ID 0x9F
-#define AT26_OP_ERASE_PAGE_4K 0x20
-#define AT26_OP_READ_ARRAY_FAST 0x0B
-#define AT26_OP_SEQUENTIAL_WRITE 0xAF
-#define AT26_OP_WRITE_ENABLE 0x06
-#define AT26_OP_WRITE_DISABLE 0x04
-#define AT26_OP_SECTOR_PROTECT 0x36
-#define AT26_OP_SECTOR_UNPROTECT 0x39
-
-/* status register bits */
-
-#define AT26_STATUS_BUSY 0x01
-#define AT26_STATUS_WRITE_ENABLE 0x02
-
-struct dataflash_local
-{
- int spi; /* SPI chip-select number */
- unsigned int page_size; /* number of bytes per page */
-};
-
-
-/* Detected DataFlash devices */
-static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
-static int nr_devices = 0;
-
-/* Allocate a single SPI transfer descriptor. We're assuming that if multiple
- SPI transfers occur at the same time, spi_access_bus() will serialize them.
- If this is not valid, then either (i) each dataflash 'priv' structure
- needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
- another mechanism. */
-static struct spi_transfer_list* spi_transfer_desc;
-
-/*
- * Perform a SPI transfer to access the DataFlash device.
- */
-static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
- char* txnext, int txnext_len, char* rxnext, int rxnext_len)
-{
- struct spi_transfer_list* list = spi_transfer_desc;
-
- list->tx[0] = tx; list->txlen[0] = tx_len;
- list->rx[0] = rx; list->rxlen[0] = rx_len;
-
- list->tx[1] = txnext; list->txlen[1] = txnext_len;
- list->rx[1] = rxnext; list->rxlen[1] = rxnext_len;
-
- list->nr_transfers = nr;
- /* Note: spi_transfer() always returns 0, there are no error checks */
- return spi_transfer(list);
-}
-
-/*
- * Return the status of the DataFlash device.
- */
-static unsigned char at91_dataflash26_status(void)
-{
- unsigned char command[2];
-
- command[0] = AT26_OP_READ_STATUS;
- command[1] = 0;
-
- do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-
- return command[1];
-}
-
-/*
- * Poll the DataFlash device until it is READY.
- */
-static unsigned char at91_dataflash26_waitready(void)
-{
- unsigned char status;
-
- while (1) {
- status = at91_dataflash26_status();
- if (!(status & AT26_STATUS_BUSY))
- return status;
- }
-}
-
-/*
- * Enable/disable write access
- */
- static void at91_dataflash26_write_enable(int enable)
-{
- unsigned char cmd[2];
-
- DEBUG(MTD_DEBUG_LEVEL3, "write_enable: enable=%i\n", enable);
-
- if (enable)
- cmd[0] = AT26_OP_WRITE_ENABLE;
- else
- cmd[0] = AT26_OP_WRITE_DISABLE;
- cmd[1] = 0;
-
- do_spi_transfer(1, cmd, 2, cmd, 2, NULL, 0, NULL, 0);
-}
-
-/*
- * Protect/unprotect sector
- */
- static void at91_dataflash26_sector_protect(loff_t addr, int protect)
-{
- unsigned char cmd[4];
-
- DEBUG(MTD_DEBUG_LEVEL3, "sector_protect: addr=0x%06x prot=%d\n",
- addr, protect);
-
- if (protect)
- cmd[0] = AT26_OP_SECTOR_PROTECT;
- else
- cmd[0] = AT26_OP_SECTOR_UNPROTECT;
- cmd[1] = (addr & 0x00FF0000) >> 16;
- cmd[2] = (addr & 0x0000FF00) >> 8;
- cmd[3] = (addr & 0x000000FF);
-
- do_spi_transfer(1, cmd, 4, cmd, 4, NULL, 0, NULL, 0);
-}
-
-/*
- * Erase blocks of flash.
- */
-static int at91_dataflash26_erase(struct mtd_info *mtd,
- struct erase_info *instr)
-{
- struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
- unsigned char cmd[4];
-
- DEBUG(MTD_DEBUG_LEVEL1, "dataflash_erase: addr=0x%06x len=%i\n",
- instr->addr, instr->len);
-
- /* Sanity checks */
- if (priv->page_size != 4096)
- return -EINVAL; /* Can't handle other sizes at the moment */
-
- if ( ((instr->len % mtd->erasesize) != 0)
- || ((instr->len % priv->page_size) != 0)
- || ((instr->addr % priv->page_size) != 0)
- || ((instr->addr + instr->len) > mtd->size))
- return -EINVAL;
-
- spi_access_bus(priv->spi);
-
- while (instr->len > 0) {
- at91_dataflash26_write_enable(1);
- at91_dataflash26_sector_protect(instr->addr, 0);
- at91_dataflash26_write_enable(1);
- cmd[0] = AT26_OP_ERASE_PAGE_4K;
- cmd[1] = (instr->addr & 0x00FF0000) >> 16;
- cmd[2] = (instr->addr & 0x0000FF00) >> 8;
- cmd[3] = (instr->addr & 0x000000FF);
-
- DEBUG(MTD_DEBUG_LEVEL3, "ERASE: (0x%02x) 0x%02x 0x%02x"
- "0x%02x\n",
- cmd[0], cmd[1], cmd[2], cmd[3]);
-
- do_spi_transfer(1, cmd, 4, cmd, 4, NULL, 0, NULL, 0);
- at91_dataflash26_waitready();
-
- instr->addr += priv->page_size; /* next page */
- instr->len -= priv->page_size;
- }
-
- at91_dataflash26_write_enable(0);
- spi_release_bus(priv->spi);
-
- /* Inform MTD subsystem that erase is complete */
- instr->state = MTD_ERASE_DONE;
- if (instr->callback)
- instr->callback(instr);
-
- return 0;
-}
-
-/*
- * Read from the DataFlash device.
- * from : Start offset in flash device
- * len : Number of bytes to read
- * retlen : Number of bytes actually read
- * buf : Buffer that will receive data
- */
-static int at91_dataflash26_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
-{
- struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
- unsigned char cmd[5];
-
- DEBUG(MTD_DEBUG_LEVEL1, "dataflash_read: %lli .. %lli\n",
- from, from+len);
-
- *retlen = 0;
-
- /* Sanity checks */
- if (!len)
- return 0;
- if (from + len > mtd->size)
- return -EINVAL;
-
- cmd[0] = AT26_OP_READ_ARRAY_FAST;
- cmd[1] = (from & 0x00FF0000) >> 16;
- cmd[2] = (from & 0x0000FF00) >> 8;
- cmd[3] = (from & 0x000000FF);
- /* cmd[4] is a "Don't care" byte */
-
- DEBUG(MTD_DEBUG_LEVEL3, "READ: (0x%02x) 0x%02x 0x%02x 0x%02x\n",
- cmd[0], cmd[1], cmd[2], cmd[3]);
-
- spi_access_bus(priv->spi);
- do_spi_transfer(2, cmd, 5, cmd, 5, buf, len, buf, len);
- spi_release_bus(priv->spi);
-
- *retlen = len;
- return 0;
-}
-
-/*
- * Write to the DataFlash device.
- * to : Start offset in flash device
- * len : Number of bytes to write
- * retlen : Number of bytes actually written
- * buf : Buffer containing the data
- */
-static int at91_dataflash26_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
-{
- struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
- unsigned int addr, buf_index = 0;
- int ret = -EIO, sector, last_sector;
- unsigned char status, cmd[5];
-
- DEBUG(MTD_DEBUG_LEVEL1, "dataflash_write: %lli .. %lli\n", to, to+len);
-
- *retlen = 0;
-
- /* Sanity checks */
- if (!len)
- return 0;
- if (to + len > mtd->size)
- return -EINVAL;
-
- spi_access_bus(priv->spi);
-
- addr = to;
- last_sector = -1;
-
- while (buf_index < len) {
- sector = addr / priv->page_size;
- /* Write first byte if a new sector begins */
- if (sector != last_sector) {
- at91_dataflash26_write_enable(1);
- at91_dataflash26_sector_protect(addr, 0);
- at91_dataflash26_write_enable(1);
-
- /* Program first byte of a new sector */
- cmd[0] = AT26_OP_SEQUENTIAL_WRITE;
- cmd[1] = (addr & 0x00FF0000) >> 16;
- cmd[2] = (addr & 0x0000FF00) >> 8;
- cmd[3] = (addr & 0x000000FF);
- cmd[4] = buf[buf_index++];
- do_spi_transfer(1, cmd, 5, cmd, 5, NULL, 0, NULL, 0);
- status = at91_dataflash26_waitready();
- addr++;
- /* On write errors, the chip resets the write enable
- flag. This also happens after the last byte of a
- sector is successfully programmed. */
- if ( ( !(status & AT26_STATUS_WRITE_ENABLE))
- && ((addr % priv->page_size) != 0) ) {
- DEBUG(MTD_DEBUG_LEVEL1,
- "write error1: addr=0x%06x, "
- "status=0x%02x\n", addr, status);
- goto write_err;
- }
- (*retlen)++;
- last_sector = sector;
- }
-
- /* Write subsequent bytes in the same sector */
- cmd[0] = AT26_OP_SEQUENTIAL_WRITE;
- cmd[1] = buf[buf_index++];
- do_spi_transfer(1, cmd, 2, cmd, 2, NULL, 0, NULL, 0);
- status = at91_dataflash26_waitready();
- addr++;
-
- if ( ( !(status & AT26_STATUS_WRITE_ENABLE))
- && ((addr % priv->page_size) != 0) ) {
- DEBUG(MTD_DEBUG_LEVEL1, "write error2: addr=0x%06x, "
- "status=0x%02x\n", addr, status);
- goto write_err;
- }
-
- (*retlen)++;
- }
-
- ret = 0;
- at91_dataflash26_write_enable(0);
-write_err:
- spi_release_bus(priv->spi);
- return ret;
-}
-
-/*
- * Initialize and register DataFlash device with MTD subsystem.
- */
-static int __init add_dataflash(int channel, char *name, int nr_pages,
- int pagesize)
-{
- struct mtd_info *device;
- struct dataflash_local *priv;
-
- if (nr_devices >= DATAFLASH_MAX_DEVICES) {
- printk(KERN_ERR "at91_dataflash26: Too many devices "
- "detected\n");
- return 0;
- }
-
- device = kzalloc(sizeof(struct mtd_info) + strlen(name) + 8,
- GFP_KERNEL);
- if (!device)
- return -ENOMEM;
-
- device->name = (char *)&device[1];
- sprintf(device->name, "%s.spi%d", name, channel);
- device->size = nr_pages * pagesize;
- device->erasesize = pagesize;
- device->owner = THIS_MODULE;
- device->type = MTD_DATAFLASH;
- device->flags = MTD_CAP_NORFLASH;
- device->erase = at91_dataflash26_erase;
- device->read = at91_dataflash26_read;
- device->write = at91_dataflash26_write;
-
- priv = (struct dataflash_local *)kzalloc(sizeof(struct dataflash_local),
- GFP_KERNEL);
- if (!priv) {
- kfree(device);
- return -ENOMEM;
- }
-
- priv->spi = channel;
- priv->page_size = pagesize;
- device->priv = priv;
-
- mtd_devices[nr_devices] = device;
- nr_devices++;
- printk(KERN_INFO "at91_dataflash26: %s detected [spi%i] (%i bytes)\n",
- name, channel, device->size);
-
- return add_mtd_device(device);
-}
-
-/*
- * Detect and initialize DataFlash device connected to specified SPI channel.
- *
- */
-
-struct dataflash26_types {
- unsigned char id0;
- unsigned char id1;
- char *name;
- int pagesize;
- int nr_pages;
-};
-
-struct dataflash26_types df26_types[] = {
- {
- .id0 = 0x04,
- .id1 = 0x00,
- .name = "AT26F004",
- .pagesize = 4096,
- .nr_pages = 128,
- },
- {
- .id0 = 0x45,
- .id1 = 0x01,
- .name = "AT26DF081A", /* Not tested ! */
- .pagesize = 4096,
- .nr_pages = 256,
- },
-};
-
-static int __init at91_dataflash26_detect(int channel)
-{
- unsigned char status, cmd[5];
- int i;
-
- spi_access_bus(channel);
- status = at91_dataflash26_status();
-
- if (status == 0 || status == 0xff) {
- printk(KERN_ERR "at91_dataflash26_detect: status error %d\n",
- status);
- spi_release_bus(channel);
- return -ENODEV;
- }
-
- cmd[0] = AT26_OP_READ_DEV_ID;
- do_spi_transfer(1, cmd, 5, cmd, 5, NULL, 0, NULL, 0);
- spi_release_bus(channel);
-
- if (cmd[1] != MANUFACTURER_ID_ATMEL)
- return -ENODEV;
-
- for (i = 0; i < ARRAY_SIZE(df26_types); i++) {
- if ( cmd[2] == df26_types[i].id0
- && cmd[3] == df26_types[i].id1)
- return add_dataflash(channel,
- df26_types[i].name,
- df26_types[i].nr_pages,
- df26_types[i].pagesize);
- }
-
- printk(KERN_ERR "at91_dataflash26_detect: Unsupported device "
- "(0x%02x/0x%02x)\n", cmd[2], cmd[3]);
- return -ENODEV;
-}
-
-static int __init at91_dataflash26_init(void)
-{
- spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list),
- GFP_KERNEL);
- if (!spi_transfer_desc)
- return -ENOMEM;
-
- /* DataFlash (SPI chip select 0) */
- at91_dataflash26_detect(0);
-
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card (SPI chip select 3) */
- at91_dataflash26_detect(3);
-#endif
- return 0;
-}
-
-static void __exit at91_dataflash26_exit(void)
-{
- int i;
-
- for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
- if (mtd_devices[i]) {
- del_mtd_device(mtd_devices[i]);
- kfree(mtd_devices[i]->priv);
- kfree(mtd_devices[i]);
- }
- }
- nr_devices = 0;
- kfree(spi_transfer_desc);
-}
-
-module_init(at91_dataflash26_init);
-module_exit(at91_dataflash26_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Hans J. Koch");
-MODULE_DESCRIPTION("DataFlash AT26xxx driver for Atmel AT91RM9200");
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index 54aa7590764..d8cc94ec4e5 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -81,9 +81,7 @@ static unsigned long __initdata doc_locations[] = {
#endif /* CONFIG_MTD_DOCPROBE_HIGH */
#elif defined(__PPC__)
0xe4000000,
-#elif defined(CONFIG_MOMENCO_OCELOT_G)
- 0xff000000,
-##else
+#else
#warning Unknown architecture for DiskOnChip. No default probe locations defined
#endif
0xffffffff };
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 78c2511ae9e..98df5bcc02f 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -1,5 +1,5 @@
/*
- * MTD SPI driver for ST M25Pxx flash chips
+ * MTD SPI driver for ST M25Pxx (and similar) serial flash chips
*
* Author: Mike Lavender, mike@steroidmicros.com
*
@@ -19,33 +19,32 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
-#include <linux/interrupt.h>
+#include <linux/mutex.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <asm/semaphore.h>
-
-
-/* NOTE: AT 25F and SST 25LF series are very similar,
- * but commands for sector erase and chip id differ...
- */
#define FLASH_PAGESIZE 256
/* Flash opcodes. */
-#define OPCODE_WREN 6 /* Write enable */
-#define OPCODE_RDSR 5 /* Read status register */
-#define OPCODE_READ 3 /* Read data bytes */
-#define OPCODE_PP 2 /* Page program */
-#define OPCODE_SE 0xd8 /* Sector erase */
-#define OPCODE_RES 0xab /* Read Electronic Signature */
+#define OPCODE_WREN 0x06 /* Write enable */
+#define OPCODE_RDSR 0x05 /* Read status register */
+#define OPCODE_READ 0x03 /* Read data bytes (low frequency) */
+#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */
+#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
+#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
+#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
+#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
#define OPCODE_RDID 0x9f /* Read JEDEC ID */
/* Status Register bits. */
#define SR_WIP 1 /* Write in progress */
#define SR_WEL 2 /* Write enable latch */
+/* meaning of other SR_* bits may differ between vendors */
#define SR_BP0 4 /* Block protect 0 */
#define SR_BP1 8 /* Block protect 1 */
#define SR_BP2 0x10 /* Block protect 2 */
@@ -65,9 +64,10 @@
struct m25p {
struct spi_device *spi;
- struct semaphore lock;
+ struct mutex lock;
struct mtd_info mtd;
- unsigned partitioned;
+ unsigned partitioned:1;
+ u8 erase_opcode;
u8 command[4];
};
@@ -150,8 +150,9 @@ static int wait_till_ready(struct m25p *flash)
*/
static int erase_sector(struct m25p *flash, u32 offset)
{
- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s at 0x%08x\n", flash->spi->dev.bus_id,
- __FUNCTION__, offset);
+ DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n",
+ flash->spi->dev.bus_id, __FUNCTION__,
+ flash->mtd.erasesize / 1024, offset);
/* Wait until finished previous write command. */
if (wait_till_ready(flash))
@@ -161,7 +162,7 @@ static int erase_sector(struct m25p *flash, u32 offset)
write_enable(flash);
/* Set up command buffer. */
- flash->command[0] = OPCODE_SE;
+ flash->command[0] = flash->erase_opcode;
flash->command[1] = offset >> 16;
flash->command[2] = offset >> 8;
flash->command[3] = offset;
@@ -201,13 +202,17 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
addr = instr->addr;
len = instr->len;
- down(&flash->lock);
+ mutex_lock(&flash->lock);
+
+ /* REVISIT in some cases we could speed up erasing large regions
+ * by using OPCODE_SE instead of OPCODE_BE_4K
+ */
/* now erase those sectors */
while (len) {
if (erase_sector(flash, addr)) {
instr->state = MTD_ERASE_FAILED;
- up(&flash->lock);
+ mutex_unlock(&flash->lock);
return -EIO;
}
@@ -215,7 +220,7 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
len -= mtd->erasesize;
}
- up(&flash->lock);
+ mutex_unlock(&flash->lock);
instr->state = MTD_ERASE_DONE;
mtd_erase_callback(instr);
@@ -260,16 +265,19 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
if (retlen)
*retlen = 0;
- down(&flash->lock);
+ mutex_lock(&flash->lock);
/* Wait till previous write/erase is done. */
if (wait_till_ready(flash)) {
/* REVISIT status return?? */
- up(&flash->lock);
+ mutex_unlock(&flash->lock);
return 1;
}
- /* NOTE: OPCODE_FAST_READ (if available) is faster... */
+ /* FIXME switch to OPCODE_FAST_READ. It's required for higher
+ * clocks; and at this writing, every chip this driver handles
+ * supports that opcode.
+ */
/* Set up the write data buffer. */
flash->command[0] = OPCODE_READ;
@@ -281,7 +289,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
*retlen = m.actual_length - sizeof(flash->command);
- up(&flash->lock);
+ mutex_unlock(&flash->lock);
return 0;
}
@@ -323,7 +331,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
t[1].tx_buf = buf;
spi_message_add_tail(&t[1], &m);
- down(&flash->lock);
+ mutex_lock(&flash->lock);
/* Wait until finished previous write command. */
if (wait_till_ready(flash))
@@ -381,10 +389,10 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
if (retlen)
*retlen += m.actual_length
- sizeof(flash->command);
- }
- }
+ }
+ }
- up(&flash->lock);
+ mutex_unlock(&flash->lock);
return 0;
}
@@ -398,24 +406,118 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
struct flash_info {
char *name;
- u8 id;
- u16 jedec_id;
+
+ /* JEDEC id zero means "no ID" (most older chips); otherwise it has
+ * a high byte of zero plus three data bytes: the manufacturer id,
+ * then a two byte device id.
+ */
+ u32 jedec_id;
+
+ /* The size listed here is what works with OPCODE_SE, which isn't
+ * necessarily called a "sector" by the vendor.
+ */
unsigned sector_size;
- unsigned n_sectors;
+ u16 n_sectors;
+
+ u16 flags;
+#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */
};
+
+/* NOTE: double check command sets and memory organization when you add
+ * more flash chips. This current list focusses on newer chips, which
+ * have been converging on command sets which including JEDEC ID.
+ */
static struct flash_info __devinitdata m25p_data [] = {
- /* REVISIT: fill in JEDEC ids, for parts that have them */
- { "m25p05", 0x05, 0x2010, 32 * 1024, 2 },
- { "m25p10", 0x10, 0x2011, 32 * 1024, 4 },
- { "m25p20", 0x11, 0x2012, 64 * 1024, 4 },
- { "m25p40", 0x12, 0x2013, 64 * 1024, 8 },
- { "m25p80", 0x13, 0x0000, 64 * 1024, 16 },
- { "m25p16", 0x14, 0x2015, 64 * 1024, 32 },
- { "m25p32", 0x15, 0x2016, 64 * 1024, 64 },
- { "m25p64", 0x16, 0x2017, 64 * 1024, 128 },
+
+ /* Atmel -- some are (confusingly) marketed as "DataFlash" */
+ { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, },
+ { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, },
+
+ { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, },
+
+ { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, },
+ { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, },
+ { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
+ { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
+
+ /* Spansion -- single (large) sector size only, at least
+ * for the chips listed here (without boot sectors).
+ */
+ { "s25sl004a", 0x010212, 64 * 1024, 8, },
+ { "s25sl008a", 0x010213, 64 * 1024, 16, },
+ { "s25sl016a", 0x010214, 64 * 1024, 32, },
+ { "s25sl032a", 0x010215, 64 * 1024, 64, },
+ { "s25sl064a", 0x010216, 64 * 1024, 128, },
+
+ /* SST -- large erase sizes are "overlays", "sectors" are 4K */
+ { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, },
+ { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, },
+ { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, },
+ { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, },
+
+ /* ST Microelectronics -- newer production may have feature updates */
+ { "m25p05", 0x202010, 32 * 1024, 2, },
+ { "m25p10", 0x202011, 32 * 1024, 4, },
+ { "m25p20", 0x202012, 64 * 1024, 4, },
+ { "m25p40", 0x202013, 64 * 1024, 8, },
+ { "m25p80", 0, 64 * 1024, 16, },
+ { "m25p16", 0x202015, 64 * 1024, 32, },
+ { "m25p32", 0x202016, 64 * 1024, 64, },
+ { "m25p64", 0x202017, 64 * 1024, 128, },
+ { "m25p128", 0x202018, 256 * 1024, 64, },
+
+ { "m45pe80", 0x204014, 64 * 1024, 16, },
+ { "m45pe16", 0x204015, 64 * 1024, 32, },
+
+ { "m25pe80", 0x208014, 64 * 1024, 16, },
+ { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, },
+
+ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+ { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, },
+ { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, },
+ { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, },
+ { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, },
+ { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, },
+ { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, },
+ { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, },
};
+static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
+{
+ int tmp;
+ u8 code = OPCODE_RDID;
+ u8 id[3];
+ u32 jedec;
+ struct flash_info *info;
+
+ /* JEDEC also defines an optional "extended device information"
+ * string for after vendor-specific data, after the three bytes
+ * we use here. Supporting some chips might require using it.
+ */
+ tmp = spi_write_then_read(spi, &code, 1, id, 3);
+ if (tmp < 0) {
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
+ spi->dev.bus_id, tmp);
+ return NULL;
+ }
+ jedec = id[0];
+ jedec = jedec << 8;
+ jedec |= id[1];
+ jedec = jedec << 8;
+ jedec |= id[2];
+
+ for (tmp = 0, info = m25p_data;
+ tmp < ARRAY_SIZE(m25p_data);
+ tmp++, info++) {
+ if (info->jedec_id == jedec)
+ return info;
+ }
+ dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
+ return NULL;
+}
+
+
/*
* board specific setup should have ensured the SPI clock used here
* matches what the READ command supports, at least until this driver
@@ -429,37 +531,51 @@ static int __devinit m25p_probe(struct spi_device *spi)
unsigned i;
/* Platform data helps sort out which chip type we have, as
- * well as how this board partitions it.
+ * well as how this board partitions it. If we don't have
+ * a chip ID, try the JEDEC id commands; they'll work for most
+ * newer chips, even if we don't recognize the particular chip.
*/
data = spi->dev.platform_data;
- if (!data || !data->type) {
- /* FIXME some chips can identify themselves with RES
- * or JEDEC get-id commands. Try them ...
- */
- DEBUG(MTD_DEBUG_LEVEL1, "%s: no chip id\n",
- spi->dev.bus_id);
- return -ENODEV;
- }
+ if (data && data->type) {
+ for (i = 0, info = m25p_data;
+ i < ARRAY_SIZE(m25p_data);
+ i++, info++) {
+ if (strcmp(data->type, info->name) == 0)
+ break;
+ }
- for (i = 0, info = m25p_data; i < ARRAY_SIZE(m25p_data); i++, info++) {
- if (strcmp(data->type, info->name) == 0)
- break;
- }
- if (i == ARRAY_SIZE(m25p_data)) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: unrecognized id %s\n",
- spi->dev.bus_id, data->type);
+ /* unrecognized chip? */
+ if (i == ARRAY_SIZE(m25p_data)) {
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n",
+ spi->dev.bus_id, data->type);
+ info = NULL;
+
+ /* recognized; is that chip really what's there? */
+ } else if (info->jedec_id) {
+ struct flash_info *chip = jedec_probe(spi);
+
+ if (!chip || chip != info) {
+ dev_warn(&spi->dev, "found %s, expected %s\n",
+ chip ? chip->name : "UNKNOWN",
+ info->name);
+ info = NULL;
+ }
+ }
+ } else
+ info = jedec_probe(spi);
+
+ if (!info)
return -ENODEV;
- }
flash = kzalloc(sizeof *flash, GFP_KERNEL);
if (!flash)
return -ENOMEM;
flash->spi = spi;
- init_MUTEX(&flash->lock);
+ mutex_init(&flash->lock);
dev_set_drvdata(&spi->dev, flash);
- if (data->name)
+ if (data && data->name)
flash->mtd.name = data->name;
else
flash->mtd.name = spi->dev.bus_id;
@@ -468,17 +584,25 @@ static int __devinit m25p_probe(struct spi_device *spi)
flash->mtd.writesize = 1;
flash->mtd.flags = MTD_CAP_NORFLASH;
flash->mtd.size = info->sector_size * info->n_sectors;
- flash->mtd.erasesize = info->sector_size;
flash->mtd.erase = m25p80_erase;
flash->mtd.read = m25p80_read;
flash->mtd.write = m25p80_write;
+ /* prefer "small sector" erase if possible */
+ if (info->flags & SECT_4K) {
+ flash->erase_opcode = OPCODE_BE_4K;
+ flash->mtd.erasesize = 4096;
+ } else {
+ flash->erase_opcode = OPCODE_SE;
+ flash->mtd.erasesize = info->sector_size;
+ }
+
dev_info(&spi->dev, "%s (%d Kbytes)\n", info->name,
flash->mtd.size / 1024);
DEBUG(MTD_DEBUG_LEVEL2,
- "mtd .name = %s, .size = 0x%.8x (%uM) "
- ".erasesize = 0x%.8x (%uK) .numeraseregions = %d\n",
+ "mtd .name = %s, .size = 0x%.8x (%uMiB) "
+ ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
flash->mtd.name,
flash->mtd.size, flash->mtd.size / (1024*1024),
flash->mtd.erasesize, flash->mtd.erasesize / 1024,
@@ -488,7 +612,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
for (i = 0; i < flash->mtd.numeraseregions; i++)
DEBUG(MTD_DEBUG_LEVEL2,
"mtd.eraseregions[%d] = { .offset = 0x%.8x, "
- ".erasesize = 0x%.8x (%uK), "
+ ".erasesize = 0x%.8x (%uKiB), "
".numblocks = %d }\n",
i, flash->mtd.eraseregions[i].offset,
flash->mtd.eraseregions[i].erasesize,
@@ -516,14 +640,14 @@ static int __devinit m25p_probe(struct spi_device *spi)
}
if (nr_parts > 0) {
- for (i = 0; i < data->nr_parts; i++) {
+ for (i = 0; i < nr_parts; i++) {
DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
"{.name = %s, .offset = 0x%.8x, "
- ".size = 0x%.8x (%uK) }\n",
- i, data->parts[i].name,
- data->parts[i].offset,
- data->parts[i].size,
- data->parts[i].size / 1024);
+ ".size = 0x%.8x (%uKiB) }\n",
+ i, parts[i].name,
+ parts[i].offset,
+ parts[i].size,
+ parts[i].size / 1024);
}
flash->partitioned = 1;
return add_mtd_partitions(&flash->mtd, parts, nr_parts);
@@ -560,6 +684,11 @@ static struct spi_driver m25p80_driver = {
},
.probe = m25p_probe,
.remove = __devexit_p(m25p_remove),
+
+ /* REVISIT: many of these chips have deep power-down modes, which
+ * should clearly be entered on suspend() to minimize power use.
+ * And also when they're otherwise idle...
+ */
};
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index a987e917f4e..a5ed6d232c3 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/mutex.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
@@ -89,7 +90,7 @@ struct dataflash {
unsigned short page_offset; /* offset in flash address */
unsigned int page_size; /* of bytes per page */
- struct semaphore lock;
+ struct mutex lock;
struct spi_device *spi;
struct mtd_info mtd;
@@ -167,7 +168,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
x.len = 4;
spi_message_add_tail(&x, &msg);
- down(&priv->lock);
+ mutex_lock(&priv->lock);
while (instr->len > 0) {
unsigned int pageaddr;
int status;
@@ -210,7 +211,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
instr->len -= priv->page_size;
}
}
- up(&priv->lock);
+ mutex_unlock(&priv->lock);
/* Inform MTD subsystem that erase is complete */
instr->state = MTD_ERASE_DONE;
@@ -266,7 +267,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
x[1].len = len;
spi_message_add_tail(&x[1], &msg);
- down(&priv->lock);
+ mutex_lock(&priv->lock);
/* Continuous read, max clock = f(car) which may be less than
* the peak rate available. Some chips support commands with
@@ -279,7 +280,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
/* plus 4 "don't care" bytes */
status = spi_sync(priv->spi, &msg);
- up(&priv->lock);
+ mutex_unlock(&priv->lock);
if (status >= 0) {
*retlen = msg.actual_length - 8;
@@ -336,7 +337,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
else
writelen = len;
- down(&priv->lock);
+ mutex_lock(&priv->lock);
while (remaining > 0) {
DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
pageaddr, offset, writelen);
@@ -441,7 +442,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
else
writelen = remaining;
}
- up(&priv->lock);
+ mutex_unlock(&priv->lock);
return status;
}
@@ -463,7 +464,7 @@ add_dataflash(struct spi_device *spi, char *name,
if (!priv)
return -ENOMEM;
- init_MUTEX(&priv->lock);
+ mutex_init(&priv->lock);
priv->spi = spi;
priv->page_size = pagesize;
priv->page_offset = pageoffset;
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index e8f686f7a35..7060a0895ce 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -30,8 +30,8 @@
*
* Notes:
* Due to what I assume is more buggy SROM, the 64M PMC551 I
- * have available claims that all 4 of it's DRAM banks have 64M
- * of ram configured (making a grand total of 256M onboard).
+ * have available claims that all 4 of its DRAM banks have 64MiB
+ * of ram configured (making a grand total of 256MiB onboard).
* This is slightly annoying since the BAR0 size reflects the
* aperture size, not the dram size, and the V370PDC supplies no
* other method for memory size discovery. This problem is
@@ -70,7 +70,7 @@
* made the memory unusable, added a fix to code to touch up
* the DRAM some.
*
- * Bugs/FIXME's:
+ * Bugs/FIXMEs:
* * MUST fix the init function to not spin on a register
* waiting for it to set .. this does not safely handle busted
* devices that never reset the register correctly which will
@@ -562,10 +562,10 @@ static u32 fixup_pmc551(struct pci_dev *dev)
/*
* Some screen fun
*/
- printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at "
+ printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at "
"0x%llx\n", (size < 1024) ? size : (size < 1048576) ?
size >> 10 : size >> 20,
- (size < 1024) ? 'B' : (size < 1048576) ? 'K' : 'M', size,
+ (size < 1024) ? "" : (size < 1048576) ? "Ki" : "Mi", size,
((dcmd & (0x1 << 3)) == 0) ? "non-" : "",
(unsigned long long)pci_resource_start(dev, 0));
@@ -649,14 +649,10 @@ MODULE_DESCRIPTION(PMC551_VERSION);
* Stuff these outside the ifdef so as to not bust compiled in driver support
*/
static int msize = 0;
-#if defined(CONFIG_MTD_PMC551_APERTURE_SIZE)
-static int asize = CONFIG_MTD_PMC551_APERTURE_SIZE;
-#else
static int asize = 0;
-#endif
module_param(msize, int, 0);
-MODULE_PARM_DESC(msize, "memory size in Megabytes [1 - 1024]");
+MODULE_PARM_DESC(msize, "memory size in MiB [1 - 1024]");
module_param(asize, int, 0);
MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]");
@@ -799,8 +795,7 @@ static int __init init_pmc551(void)
mtd->owner = THIS_MODULE;
if (add_mtd_device(mtd)) {
- printk(KERN_NOTICE "pmc551: Failed to register new "
- "device\n");
+ printk(KERN_NOTICE "pmc551: Failed to register new device\n");
pci_iounmap(PCI_Device, priv->start);
kfree(mtd->priv);
kfree(mtd);
@@ -811,13 +806,13 @@ static int __init init_pmc551(void)
pci_dev_get(PCI_Device);
printk(KERN_NOTICE "Registered pmc551 memory device.\n");
- printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n",
+ printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n",
priv->asize >> 20,
priv->start, priv->start + priv->asize);
- printk(KERN_NOTICE "Total memory is %d%c\n",
+ printk(KERN_NOTICE "Total memory is %d%sB\n",
(length < 1024) ? length :
(length < 1048576) ? length >> 10 : length >> 20,
- (length < 1024) ? 'B' : (length < 1048576) ? 'K' : 'M');
+ (length < 1024) ? "" : (length < 1048576) ? "Ki" : "Mi");
priv->nextpmc551 = pmc551list;
pmc551list = mtd;
found++;
@@ -850,7 +845,7 @@ static void __exit cleanup_pmc551(void)
pmc551list = priv->nextpmc551;
if (priv->start) {
- printk(KERN_DEBUG "pmc551: unmapping %dM starting at "
+ printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at "
"0x%p\n", priv->asize >> 20, priv->start);
pci_iounmap(priv->dev, priv->start);
}
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index ecac0e438f4..b8917beeb65 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -580,14 +580,13 @@ int INFTL_mount(struct INFTLrecord *s)
logical_block = block = BLOCK_NIL;
/* Temporary buffer to store ANAC numbers. */
- ANACtable = kmalloc(s->nb_blocks * sizeof(u8), GFP_KERNEL);
+ ANACtable = kcalloc(s->nb_blocks, sizeof(u8), GFP_KERNEL);
if (!ANACtable) {
printk(KERN_WARNING "INFTL: allocation of ANACtable "
"failed (%zd bytes)\n",
s->nb_blocks * sizeof(u8));
return -ENOMEM;
}
- memset(ANACtable, 0, s->nb_blocks);
/*
* First pass is to explore each physical unit, and construct the
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 6cd132c7518..2a2a125b0c7 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -163,20 +163,12 @@ config MTD_SBC_GXX
More info at
<http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>.
-config MTD_LUBBOCK
- tristate "CFI Flash device mapped on Intel Lubbock XScale eval board"
- depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS
- help
- This provides a driver for the on-board flash of the Intel
- 'Lubbock' XScale evaluation board.
-
-config MTD_MAINSTONE
- tristate "CFI Flash device mapped on Intel Mainstone XScale eval board"
- depends on MACH_MAINSTONE && MTD_CFI_INTELEXT
+config MTD_PXA2XX
+ tristate "CFI Flash device mapped on Intel XScale PXA2xx based boards"
+ depends on (PXA25x || PXA27x) && MTD_CFI_INTELEXT
select MTD_PARTITIONS
help
- This provides a driver for the on-board flash of the Intel
- 'Mainstone PXA27x evaluation board.
+ This provides a driver for the NOR flash attached to a PXA2xx chip.
config MTD_OCTAGON
tristate "JEDEC Flash device mapped on Octagon 5066 SBC"
@@ -354,7 +346,7 @@ config MTD_CFI_FLAGADM
config MTD_WALNUT
tristate "Flash device mapped on IBM 405GP Walnut"
- depends on MTD_JEDECPROBE && WALNUT
+ depends on MTD_JEDECPROBE && WALNUT && !PPC_MERGE
help
This enables access routines for the flash chips on the IBM 405GP
Walnut board. If you have one of these boards and would like to
@@ -370,7 +362,7 @@ config MTD_EBONY
config MTD_OCOTEA
tristate "Flash devices mapped on IBM 440GX Ocotea"
- depends on MTD_CFI && OCOTEA
+ depends on MTD_CFI && OCOTEA && !PPC_MERGE
help
This enables access routines for the flash chips on the IBM 440GX
Ocotea board. If you have one of these boards and would like to
@@ -384,22 +376,6 @@ config MTD_REDWOOD
Redwood board. If you have one of these boards and would like to
use the flash chips on it, say 'Y'.
-config MTD_TQM834x
- tristate "Flash device mapped on TQ Components TQM834x Boards"
- depends on MTD_CFI && TQM834x
- help
- This enables access routines for the flash chips on the
- TQ Components TQM834x boards. If you have one of these boards
- and would like to use the flash chips on it, say 'Y'.
-
-config MTD_OCELOT
- tristate "Momenco Ocelot boot flash device"
- depends on MOMENCO_OCELOT
- help
- This enables access routines for the boot flash device and for the
- NVRAM on the Momenco Ocelot board. If you have one of these boards
- and would like access to either of these, say 'Y'.
-
config MTD_SOLUTIONENGINE
tristate "CFI Flash device mapped on Hitachi SolutionEngine"
depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS
@@ -605,6 +581,13 @@ config MTD_SHARP_SL
help
This enables access to the flash chip on the Sharp SL Series of PDAs.
+config MTD_INTEL_VR_NOR
+ tristate "NOR flash on Intel Vermilion Range Expansion Bus CS0"
+ depends on PCI
+ help
+ Map driver for a NOR flash bank located on the Expansion Bus of the
+ Intel Vermilion Range chipset.
+
config MTD_PLATRAM
tristate "Map driver for platform device RAM (mtd-ram)"
select MTD_RAM
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 970b189271a..316382a1401 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -20,8 +20,7 @@ obj-$(CONFIG_MTD_ESB2ROM) += esb2rom.o
obj-$(CONFIG_MTD_ICHXROM) += ichxrom.o
obj-$(CONFIG_MTD_CK804XROM) += ck804xrom.o
obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o
-obj-$(CONFIG_MTD_LUBBOCK) += lubbock-flash.o
-obj-$(CONFIG_MTD_MAINSTONE) += mainstone-flash.o
+obj-$(CONFIG_MTD_PXA2XX) += pxa2xx-flash.o
obj-$(CONFIG_MTD_MBX860) += mbx860.o
obj-$(CONFIG_MTD_CEIVA) += ceiva.o
obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o
@@ -43,7 +42,6 @@ obj-$(CONFIG_MTD_SUN_UFLASH) += sun_uflash.o
obj-$(CONFIG_MTD_VMAX) += vmax301.o
obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o
-obj-$(CONFIG_MTD_OCELOT) += ocelot.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
@@ -70,4 +68,4 @@ obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o
obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
-obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
+obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
diff --git a/drivers/mtd/maps/alchemy-flash.c b/drivers/mtd/maps/alchemy-flash.c
index 84fbe0e8c47..82811bcb043 100644
--- a/drivers/mtd/maps/alchemy-flash.c
+++ b/drivers/mtd/maps/alchemy-flash.c
@@ -75,13 +75,6 @@
#define BOARD_FLASH_WIDTH 2 /* 16-bits */
#endif
-#ifdef CONFIG_MIPS_HYDROGEN3
-#define BOARD_MAP_NAME "Hydrogen3 Flash"
-#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#define USE_LOCAL_ACCESSORS /* why? */
-#endif
-
#ifdef CONFIG_MIPS_BOSPORUS
#define BOARD_MAP_NAME "Bosporus Flash"
#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */
@@ -130,13 +123,6 @@ int __init alchemy_mtd_init(void)
window_addr = 0x20000000 - BOARD_FLASH_SIZE;
window_size = BOARD_FLASH_SIZE;
-#ifdef CONFIG_MIPS_MIRAGE_WHY
- /* Boot ROM flash bank only; no user bank */
- window_addr = 0x1C000000;
- window_size = 0x04000000;
- /* USERFS from 0x1C00 0000 to 0x1FC00000 */
- alchemy_partitions[0].size = 0x03C00000;
-#endif
/*
* Static partition definition selection
diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c
new file mode 100644
index 00000000000..1e7814ae212
--- /dev/null
+++ b/drivers/mtd/maps/intel_vr_nor.c
@@ -0,0 +1,298 @@
+/*
+ * drivers/mtd/maps/intel_vr_nor.c
+ *
+ * An MTD map driver for a NOR flash bank on the Expansion Bus of the Intel
+ * Vermilion Range chipset.
+ *
+ * The Vermilion Range Expansion Bus supports four chip selects, each of which
+ * has 64MiB of address space. The 2nd BAR of the Expansion Bus PCI Device
+ * is a 256MiB memory region containing the address spaces for all four of the
+ * chip selects, with start addresses hardcoded on 64MiB boundaries.
+ *
+ * This map driver only supports NOR flash on chip select 0. The buswidth
+ * (either 8 bits or 16 bits) is determined by reading the Expansion Bus Timing
+ * and Control Register for Chip Select 0 (EXP_TIMING_CS0). This driver does
+ * not modify the value in the EXP_TIMING_CS0 register except to enable writing
+ * and disable boot acceleration. The timing parameters in the register are
+ * assumed to have been properly initialized by the BIOS. The reset default
+ * timing parameters are maximally conservative (slow), so access to the flash
+ * will be slower than it should be if the BIOS has not initialized the timing
+ * parameters.
+ *
+ * Author: Andy Lowe <alowe@mvista.com>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/flashchip.h>
+
+#define DRV_NAME "vr_nor"
+
+struct vr_nor_mtd {
+ void __iomem *csr_base;
+ struct map_info map;
+ struct mtd_info *info;
+ int nr_parts;
+ struct pci_dev *dev;
+};
+
+/* Expansion Bus Configuration and Status Registers are in BAR 0 */
+#define EXP_CSR_MBAR 0
+/* Expansion Bus Memory Window is BAR 1 */
+#define EXP_WIN_MBAR 1
+/* Maximum address space for Chip Select 0 is 64MiB */
+#define CS0_SIZE 0x04000000
+/* Chip Select 0 is at offset 0 in the Memory Window */
+#define CS0_START 0x0
+/* Chip Select 0 Timing Register is at offset 0 in CSR */
+#define EXP_TIMING_CS0 0x00
+#define TIMING_CS_EN (1 << 31) /* Chip Select Enable */
+#define TIMING_BOOT_ACCEL_DIS (1 << 8) /* Boot Acceleration Disable */
+#define TIMING_WR_EN (1 << 1) /* Write Enable */
+#define TIMING_BYTE_EN (1 << 0) /* 8-bit vs 16-bit bus */
+#define TIMING_MASK 0x3FFF0000
+
+static void __devexit vr_nor_destroy_partitions(struct vr_nor_mtd *p)
+{
+ if (p->nr_parts > 0) {
+#if defined(CONFIG_MTD_PARTITIONS) || defined(CONFIG_MTD_PARTITIONS_MODULE)
+ del_mtd_partitions(p->info);
+#endif
+ } else
+ del_mtd_device(p->info);
+}
+
+static int __devinit vr_nor_init_partitions(struct vr_nor_mtd *p)
+{
+ int err = 0;
+#if defined(CONFIG_MTD_PARTITIONS) || defined(CONFIG_MTD_PARTITIONS_MODULE)
+ struct mtd_partition *parts;
+ static const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+ /* register the flash bank */
+#if defined(CONFIG_MTD_PARTITIONS) || defined(CONFIG_MTD_PARTITIONS_MODULE)
+ /* partition the flash bank */
+ p->nr_parts = parse_mtd_partitions(p->info, part_probes, &parts, 0);
+ if (p->nr_parts > 0)
+ err = add_mtd_partitions(p->info, parts, p->nr_parts);
+#endif
+ if (p->nr_parts <= 0)
+ err = add_mtd_device(p->info);
+
+ return err;
+}
+
+static void __devexit vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p)
+{
+ map_destroy(p->info);
+}
+
+static int __devinit vr_nor_mtd_setup(struct vr_nor_mtd *p)
+{
+ static const char *probe_types[] =
+ { "cfi_probe", "jedec_probe", NULL };
+ const char **type;
+
+ for (type = probe_types; !p->info && *type; type++)
+ p->info = do_map_probe(*type, &p->map);
+ if (!p->info)
+ return -ENODEV;
+
+ p->info->owner = THIS_MODULE;
+
+ return 0;
+}
+
+static void __devexit vr_nor_destroy_maps(struct vr_nor_mtd *p)
+{
+ unsigned int exp_timing_cs0;
+
+ /* write-protect the flash bank */
+ exp_timing_cs0 = readl(p->csr_base + EXP_TIMING_CS0);
+ exp_timing_cs0 &= ~TIMING_WR_EN;
+ writel(exp_timing_cs0, p->csr_base + EXP_TIMING_CS0);
+
+ /* unmap the flash window */
+ iounmap(p->map.virt);
+
+ /* unmap the csr window */
+ iounmap(p->csr_base);
+}
+
+/*
+ * Initialize the map_info structure and map the flash.
+ * Returns 0 on success, nonzero otherwise.
+ */
+static int __devinit vr_nor_init_maps(struct vr_nor_mtd *p)
+{
+ unsigned long csr_phys, csr_len;
+ unsigned long win_phys, win_len;
+ unsigned int exp_timing_cs0;
+ int err;
+
+ csr_phys = pci_resource_start(p->dev, EXP_CSR_MBAR);
+ csr_len = pci_resource_len(p->dev, EXP_CSR_MBAR);
+ win_phys = pci_resource_start(p->dev, EXP_WIN_MBAR);
+ win_len = pci_resource_len(p->dev, EXP_WIN_MBAR);
+
+ if (!csr_phys || !csr_len || !win_phys || !win_len)
+ return -ENODEV;
+
+ if (win_len < (CS0_START + CS0_SIZE))
+ return -ENXIO;
+
+ p->csr_base = ioremap_nocache(csr_phys, csr_len);
+ if (!p->csr_base)
+ return -ENOMEM;
+
+ exp_timing_cs0 = readl(p->csr_base + EXP_TIMING_CS0);
+ if (!(exp_timing_cs0 & TIMING_CS_EN)) {
+ dev_warn(&p->dev->dev, "Expansion Bus Chip Select 0 "
+ "is disabled.\n");
+ err = -ENODEV;
+ goto release;
+ }
+ if ((exp_timing_cs0 & TIMING_MASK) == TIMING_MASK) {
+ dev_warn(&p->dev->dev, "Expansion Bus Chip Select 0 "
+ "is configured for maximally slow access times.\n");
+ }
+ p->map.name = DRV_NAME;
+ p->map.bankwidth = (exp_timing_cs0 & TIMING_BYTE_EN) ? 1 : 2;
+ p->map.phys = win_phys + CS0_START;
+ p->map.size = CS0_SIZE;
+ p->map.virt = ioremap_nocache(p->map.phys, p->map.size);
+ if (!p->map.virt) {
+ err = -ENOMEM;
+ goto release;
+ }
+ simple_map_init(&p->map);
+
+ /* Enable writes to flash bank */
+ exp_timing_cs0 |= TIMING_BOOT_ACCEL_DIS | TIMING_WR_EN;
+ writel(exp_timing_cs0, p->csr_base + EXP_TIMING_CS0);
+
+ return 0;
+
+ release:
+ iounmap(p->csr_base);
+ return err;
+}
+
+static struct pci_device_id vr_nor_pci_ids[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x500D)},
+ {0,}
+};
+
+static void __devexit vr_nor_pci_remove(struct pci_dev *dev)
+{
+ struct vr_nor_mtd *p = pci_get_drvdata(dev);
+
+ pci_set_drvdata(dev, NULL);
+ vr_nor_destroy_partitions(p);
+ vr_nor_destroy_mtd_setup(p);
+ vr_nor_destroy_maps(p);
+ kfree(p);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+}
+
+static int __devinit
+vr_nor_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ struct vr_nor_mtd *p = NULL;
+ unsigned int exp_timing_cs0;
+ int err;
+
+ err = pci_enable_device(dev);
+ if (err)
+ goto out;
+
+ err = pci_request_regions(dev, DRV_NAME);
+ if (err)
+ goto disable_dev;
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ err = -ENOMEM;
+ if (!p)
+ goto release;
+
+ p->dev = dev;
+
+ err = vr_nor_init_maps(p);
+ if (err)
+ goto release;
+
+ err = vr_nor_mtd_setup(p);
+ if (err)
+ goto destroy_maps;
+
+ err = vr_nor_init_partitions(p);
+ if (err)
+ goto destroy_mtd_setup;
+
+ pci_set_drvdata(dev, p);
+
+ return 0;
+
+ destroy_mtd_setup:
+ map_destroy(p->info);
+
+ destroy_maps:
+ /* write-protect the flash bank */
+ exp_timing_cs0 = readl(p->csr_base + EXP_TIMING_CS0);
+ exp_timing_cs0 &= ~TIMING_WR_EN;
+ writel(exp_timing_cs0, p->csr_base + EXP_TIMING_CS0);
+
+ /* unmap the flash window */
+ iounmap(p->map.virt);
+
+ /* unmap the csr window */
+ iounmap(p->csr_base);
+
+ release:
+ kfree(p);
+ pci_release_regions(dev);
+
+ disable_dev:
+ pci_disable_device(dev);
+
+ out:
+ return err;
+}
+
+static struct pci_driver vr_nor_pci_driver = {
+ .name = DRV_NAME,
+ .probe = vr_nor_pci_probe,
+ .remove = __devexit_p(vr_nor_pci_remove),
+ .id_table = vr_nor_pci_ids,
+};
+
+static int __init vr_nor_mtd_init(void)
+{
+ return pci_register_driver(&vr_nor_pci_driver);
+}
+
+static void __exit vr_nor_mtd_exit(void)
+{
+ pci_unregister_driver(&vr_nor_pci_driver);
+}
+
+module_init(vr_nor_mtd_init);
+module_exit(vr_nor_mtd_exit);
+
+MODULE_AUTHOR("Andy Lowe");
+MODULE_DESCRIPTION("MTD map driver for NOR flash on Intel Vermilion Range");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, vr_nor_pci_ids);
diff --git a/drivers/mtd/maps/lubbock-flash.c b/drivers/mtd/maps/lubbock-flash.c
deleted file mode 100644
index e8560683b97..00000000000
--- a/drivers/mtd/maps/lubbock-flash.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * $Id: lubbock-flash.c,v 1.21 2005/11/07 11:14:27 gleixner Exp $
- *
- * Map driver for the Lubbock developer platform.
- *
- * Author: Nicolas Pitre
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
-#include <asm/cacheflush.h>
-
-#define ROM_ADDR 0x00000000
-#define FLASH_ADDR 0x04000000
-
-#define WINDOW_SIZE 64*1024*1024
-
-static void lubbock_map_inval_cache(struct map_info *map, unsigned long from, ssize_t len)
-{
- flush_ioremap_region(map->phys, map->cached, from, len);
-}
-
-static struct map_info lubbock_maps[2] = { {
- .size = WINDOW_SIZE,
- .phys = 0x00000000,
- .inval_cache = lubbock_map_inval_cache,
-}, {
- .size = WINDOW_SIZE,
- .phys = 0x04000000,
- .inval_cache = lubbock_map_inval_cache,
-} };
-
-static struct mtd_partition lubbock_partitions[] = {
- {
- .name = "Bootloader",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },{
- .name = "Kernel",
- .size = 0x00100000,
- .offset = 0x00040000,
- },{
- .name = "Filesystem",
- .size = MTDPART_SIZ_FULL,
- .offset = 0x00140000
- }
-};
-
-static struct mtd_info *mymtds[2];
-static struct mtd_partition *parsed_parts[2];
-static int nr_parsed_parts[2];
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static int __init init_lubbock(void)
-{
- int flashboot = (LUB_CONF_SWITCHES & 1);
- int ret = 0, i;
-
- lubbock_maps[0].bankwidth = lubbock_maps[1].bankwidth =
- (BOOT_DEF & 1) ? 2 : 4;
-
- /* Compensate for the nROMBT switch which swaps the flash banks */
- printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
- flashboot?"Flash":"ROM", flashboot);
-
- lubbock_maps[flashboot^1].name = "Lubbock Application Flash";
- lubbock_maps[flashboot].name = "Lubbock Boot ROM";
-
- for (i = 0; i < 2; i++) {
- lubbock_maps[i].virt = ioremap(lubbock_maps[i].phys, WINDOW_SIZE);
- if (!lubbock_maps[i].virt) {
- printk(KERN_WARNING "Failed to ioremap %s\n", lubbock_maps[i].name);
- if (!ret)
- ret = -ENOMEM;
- continue;
- }
- lubbock_maps[i].cached = ioremap_cached(lubbock_maps[i].phys, WINDOW_SIZE);
- if (!lubbock_maps[i].cached)
- printk(KERN_WARNING "Failed to ioremap cached %s\n", lubbock_maps[i].name);
- simple_map_init(&lubbock_maps[i]);
-
- printk(KERN_NOTICE "Probing %s at physical address 0x%08lx (%d-bit bankwidth)\n",
- lubbock_maps[i].name, lubbock_maps[i].phys,
- lubbock_maps[i].bankwidth * 8);
-
- mymtds[i] = do_map_probe("cfi_probe", &lubbock_maps[i]);
-
- if (!mymtds[i]) {
- iounmap((void *)lubbock_maps[i].virt);
- if (lubbock_maps[i].cached)
- iounmap(lubbock_maps[i].cached);
- if (!ret)
- ret = -EIO;
- continue;
- }
- mymtds[i]->owner = THIS_MODULE;
-
- ret = parse_mtd_partitions(mymtds[i], probes,
- &parsed_parts[i], 0);
-
- if (ret > 0)
- nr_parsed_parts[i] = ret;
- }
-
- if (!mymtds[0] && !mymtds[1])
- return ret;
-
- for (i = 0; i < 2; i++) {
- if (!mymtds[i]) {
- printk(KERN_WARNING "%s is absent. Skipping\n", lubbock_maps[i].name);
- } else if (nr_parsed_parts[i]) {
- add_mtd_partitions(mymtds[i], parsed_parts[i], nr_parsed_parts[i]);
- } else if (!i) {
- printk("Using static partitions on %s\n", lubbock_maps[i].name);
- add_mtd_partitions(mymtds[i], lubbock_partitions, ARRAY_SIZE(lubbock_partitions));
- } else {
- printk("Registering %s as whole device\n", lubbock_maps[i].name);
- add_mtd_device(mymtds[i]);
- }
- }
- return 0;
-}
-
-static void __exit cleanup_lubbock(void)
-{
- int i;
- for (i = 0; i < 2; i++) {
- if (!mymtds[i])
- continue;
-
- if (nr_parsed_parts[i] || !i)
- del_mtd_partitions(mymtds[i]);
- else
- del_mtd_device(mymtds[i]);
-
- map_destroy(mymtds[i]);
- iounmap((void *)lubbock_maps[i].virt);
- if (lubbock_maps[i].cached)
- iounmap(lubbock_maps[i].cached);
-
- kfree(parsed_parts[i]);
- }
-}
-
-module_init(init_lubbock);
-module_exit(cleanup_lubbock);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
-MODULE_DESCRIPTION("MTD map driver for Intel Lubbock");
diff --git a/drivers/mtd/maps/mainstone-flash.c b/drivers/mtd/maps/mainstone-flash.c
deleted file mode 100644
index d76487d82dc..00000000000
--- a/drivers/mtd/maps/mainstone-flash.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * $Id: $
- *
- * Map driver for the Mainstone developer platform.
- *
- * Author: Nicolas Pitre
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
-#include <asm/cacheflush.h>
-
-
-#define ROM_ADDR 0x00000000
-#define FLASH_ADDR 0x04000000
-
-#define WINDOW_SIZE 0x04000000
-
-static void mainstone_map_inval_cache(struct map_info *map, unsigned long from,
- ssize_t len)
-{
- flush_ioremap_region(map->phys, map->cached, from, len);
-}
-
-static struct map_info mainstone_maps[2] = { {
- .size = WINDOW_SIZE,
- .phys = PXA_CS0_PHYS,
- .inval_cache = mainstone_map_inval_cache,
-}, {
- .size = WINDOW_SIZE,
- .phys = PXA_CS1_PHYS,
- .inval_cache = mainstone_map_inval_cache,
-} };
-
-static struct mtd_partition mainstone_partitions[] = {
- {
- .name = "Bootloader",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },{
- .name = "Kernel",
- .size = 0x00400000,
- .offset = 0x00040000,
- },{
- .name = "Filesystem",
- .size = MTDPART_SIZ_FULL,
- .offset = 0x00440000
- }
-};
-
-static struct mtd_info *mymtds[2];
-static struct mtd_partition *parsed_parts[2];
-static int nr_parsed_parts[2];
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static int __init init_mainstone(void)
-{
- int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
- int ret = 0, i;
-
- mainstone_maps[0].bankwidth = (BOOT_DEF & 1) ? 2 : 4;
- mainstone_maps[1].bankwidth = 4;
-
- /* Compensate for SW7 which swaps the flash banks */
- mainstone_maps[SW7].name = "processor flash";
- mainstone_maps[SW7 ^ 1].name = "main board flash";
-
- printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
- mainstone_maps[0].name);
-
- for (i = 0; i < 2; i++) {
- mainstone_maps[i].virt = ioremap(mainstone_maps[i].phys,
- WINDOW_SIZE);
- if (!mainstone_maps[i].virt) {
- printk(KERN_WARNING "Failed to ioremap %s\n",
- mainstone_maps[i].name);
- if (!ret)
- ret = -ENOMEM;
- continue;
- }
- mainstone_maps[i].cached =
- ioremap_cached(mainstone_maps[i].phys, WINDOW_SIZE);
- if (!mainstone_maps[i].cached)
- printk(KERN_WARNING "Failed to ioremap cached %s\n",
- mainstone_maps[i].name);
- simple_map_init(&mainstone_maps[i]);
-
- printk(KERN_NOTICE
- "Probing %s at physical address 0x%08lx"
- " (%d-bit bankwidth)\n",
- mainstone_maps[i].name, mainstone_maps[i].phys,
- mainstone_maps[i].bankwidth * 8);
-
- mymtds[i] = do_map_probe("cfi_probe", &mainstone_maps[i]);
-
- if (!mymtds[i]) {
- iounmap((void *)mainstone_maps[i].virt);
- if (mainstone_maps[i].cached)
- iounmap(mainstone_maps[i].cached);
- if (!ret)
- ret = -EIO;
- continue;
- }
- mymtds[i]->owner = THIS_MODULE;
-
- ret = parse_mtd_partitions(mymtds[i], probes,
- &parsed_parts[i], 0);
-
- if (ret > 0)
- nr_parsed_parts[i] = ret;
- }
-
- if (!mymtds[0] && !mymtds[1])
- return ret;
-
- for (i = 0; i < 2; i++) {
- if (!mymtds[i]) {
- printk(KERN_WARNING "%s is absent. Skipping\n",
- mainstone_maps[i].name);
- } else if (nr_parsed_parts[i]) {
- add_mtd_partitions(mymtds[i], parsed_parts[i],
- nr_parsed_parts[i]);
- } else if (!i) {
- printk("Using static partitions on %s\n",
- mainstone_maps[i].name);
- add_mtd_partitions(mymtds[i], mainstone_partitions,
- ARRAY_SIZE(mainstone_partitions));
- } else {
- printk("Registering %s as whole device\n",
- mainstone_maps[i].name);
- add_mtd_device(mymtds[i]);
- }
- }
- return 0;
-}
-
-static void __exit cleanup_mainstone(void)
-{
- int i;
- for (i = 0; i < 2; i++) {
- if (!mymtds[i])
- continue;
-
- if (nr_parsed_parts[i] || !i)
- del_mtd_partitions(mymtds[i]);
- else
- del_mtd_device(mymtds[i]);
-
- map_destroy(mymtds[i]);
- iounmap((void *)mainstone_maps[i].virt);
- if (mainstone_maps[i].cached)
- iounmap(mainstone_maps[i].cached);
- kfree(parsed_parts[i]);
- }
-}
-
-module_init(init_mainstone);
-module_exit(cleanup_mainstone);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
-MODULE_DESCRIPTION("MTD map driver for Intel Mainstone");
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 7b96cd02f82..0c9b305a72e 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -158,68 +158,11 @@ static struct notifier_block nettel_notifier_block = {
nettel_reboot_notifier, NULL, 0
};
-/*
- * Erase the configuration file system.
- * Used to support the software reset button.
- */
-static void nettel_erasecallback(struct erase_info *done)
-{
- wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
- wake_up(wait_q);
-}
-
-static struct erase_info nettel_erase;
-
-int nettel_eraseconfig(void)
-{
- struct mtd_info *mtd;
- DECLARE_WAITQUEUE(wait, current);
- wait_queue_head_t wait_q;
- int ret;
-
- init_waitqueue_head(&wait_q);
- mtd = get_mtd_device(NULL, 2);
- if (!IS_ERR(mtd)) {
- nettel_erase.mtd = mtd;
- nettel_erase.callback = nettel_erasecallback;
- nettel_erase.callback = NULL;
- nettel_erase.addr = 0;
- nettel_erase.len = mtd->size;
- nettel_erase.priv = (u_long) &wait_q;
- nettel_erase.priv = 0;
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&wait_q, &wait);
-
- ret = mtd->erase(mtd, &nettel_erase);
- if (ret) {
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&wait_q, &wait);
- put_mtd_device(mtd);
- return(ret);
- }
-
- schedule(); /* Wait for erase to finish. */
- remove_wait_queue(&wait_q, &wait);
-
- put_mtd_device(mtd);
- }
-
- return(0);
-}
-
-#else
-
-int nettel_eraseconfig(void)
-{
- return(0);
-}
-
#endif
/****************************************************************************/
-int __init nettel_init(void)
+static int __init nettel_init(void)
{
volatile unsigned long *amdpar;
unsigned long amdaddr, maxsize;
@@ -421,10 +364,6 @@ int __init nettel_init(void)
intel_mtd->owner = THIS_MODULE;
-#ifndef CONFIG_BLK_DEV_INITRD
- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, 1);
-#endif
-
num_intel_partitions = sizeof(nettel_intel_partitions) /
sizeof(nettel_intel_partitions[0]);
@@ -477,7 +416,7 @@ out_unmap2:
/****************************************************************************/
-void __exit nettel_cleanup(void)
+static void __exit nettel_cleanup(void)
{
#ifdef CONFIG_MTD_CFI_INTELEXT
unregister_reboot_notifier(&nettel_notifier_block);
diff --git a/drivers/mtd/maps/ocelot.c b/drivers/mtd/maps/ocelot.c
deleted file mode 100644
index 6977963d789..00000000000
--- a/drivers/mtd/maps/ocelot.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * $Id: ocelot.c,v 1.17 2005/11/07 11:14:27 gleixner Exp $
- *
- * Flash on Momenco Ocelot
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#define OCELOT_PLD 0x2c000000
-#define FLASH_WINDOW_ADDR 0x2fc00000
-#define FLASH_WINDOW_SIZE 0x00080000
-#define FLASH_BUSWIDTH 1
-#define NVRAM_WINDOW_ADDR 0x2c800000
-#define NVRAM_WINDOW_SIZE 0x00007FF0
-#define NVRAM_BUSWIDTH 1
-
-static unsigned int cacheflush = 0;
-
-static struct mtd_info *flash_mtd;
-static struct mtd_info *nvram_mtd;
-
-static void ocelot_ram_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-{
- struct map_info *map = mtd->priv;
- size_t done = 0;
-
- /* If we use memcpy, it does word-wide writes. Even though we told the
- GT64120A that it's an 8-bit wide region, word-wide writes don't work.
- We end up just writing the first byte of the four to all four bytes.
- So we have this loop instead */
- *retlen = len;
- while(len) {
- __raw_writeb(*(unsigned char *) from, map->virt + to);
- from++;
- to++;
- len--;
- }
-}
-
-static struct mtd_partition *parsed_parts;
-
-struct map_info ocelot_flash_map = {
- .name = "Ocelot boot flash",
- .size = FLASH_WINDOW_SIZE,
- .bankwidth = FLASH_BUSWIDTH,
- .phys = FLASH_WINDOW_ADDR,
-};
-
-struct map_info ocelot_nvram_map = {
- .name = "Ocelot NVRAM",
- .size = NVRAM_WINDOW_SIZE,
- .bankwidth = NVRAM_BUSWIDTH,
- .phys = NVRAM_WINDOW_ADDR,
-};
-
-static const char *probes[] = { "RedBoot", NULL };
-
-static int __init init_ocelot_maps(void)
-{
- void *pld;
- int nr_parts;
- unsigned char brd_status;
-
- printk(KERN_INFO "Momenco Ocelot MTD mappings: Flash 0x%x at 0x%x, NVRAM 0x%x at 0x%x\n",
- FLASH_WINDOW_SIZE, FLASH_WINDOW_ADDR, NVRAM_WINDOW_SIZE, NVRAM_WINDOW_ADDR);
-
- /* First check whether the flash jumper is present */
- pld = ioremap(OCELOT_PLD, 0x10);
- if (!pld) {
- printk(KERN_NOTICE "Failed to ioremap Ocelot PLD\n");
- return -EIO;
- }
- brd_status = readb(pld+4);
- iounmap(pld);
-
- /* Now ioremap the NVRAM space */
- ocelot_nvram_map.virt = ioremap_nocache(NVRAM_WINDOW_ADDR, NVRAM_WINDOW_SIZE);
- if (!ocelot_nvram_map.virt) {
- printk(KERN_NOTICE "Failed to ioremap Ocelot NVRAM space\n");
- return -EIO;
- }
-
- simple_map_init(&ocelot_nvram_map);
-
- /* And do the RAM probe on it to get an MTD device */
- nvram_mtd = do_map_probe("map_ram", &ocelot_nvram_map);
- if (!nvram_mtd) {
- printk("NVRAM probe failed\n");
- goto fail_1;
- }
- nvram_mtd->owner = THIS_MODULE;
- nvram_mtd->erasesize = 16;
- /* Override the write() method */
- nvram_mtd->write = ocelot_ram_write;
-
- /* Now map the flash space */
- ocelot_flash_map.virt = ioremap_nocache(FLASH_WINDOW_ADDR, FLASH_WINDOW_SIZE);
- if (!ocelot_flash_map.virt) {
- printk(KERN_NOTICE "Failed to ioremap Ocelot flash space\n");
- goto fail_2;
- }
- /* Now the cached version */
- ocelot_flash_map.cached = (unsigned long)__ioremap(FLASH_WINDOW_ADDR, FLASH_WINDOW_SIZE, 0);
-
- simple_map_init(&ocelot_flash_map);
-
- /* Only probe for flash if the write jumper is present */
- if (brd_status & 0x40) {
- flash_mtd = do_map_probe("jedec", &ocelot_flash_map);
- } else {
- printk(KERN_NOTICE "Ocelot flash write jumper not present. Treating as ROM\n");
- }
- /* If that failed or the jumper's absent, pretend it's ROM */
- if (!flash_mtd) {
- flash_mtd = do_map_probe("map_rom", &ocelot_flash_map);
- /* If we're treating it as ROM, set the erase size */
- if (flash_mtd)
- flash_mtd->erasesize = 0x10000;
- }
- if (!flash_mtd)
- goto fail3;
-
- add_mtd_device(nvram_mtd);
-
- flash_mtd->owner = THIS_MODULE;
- nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0);
-
- if (nr_parts > 0)
- add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
- else
- add_mtd_device(flash_mtd);
-
- return 0;
-
- fail3:
- iounmap((void *)ocelot_flash_map.virt);
- if (ocelot_flash_map.cached)
- iounmap((void *)ocelot_flash_map.cached);
- fail_2:
- map_destroy(nvram_mtd);
- fail_1:
- iounmap((void *)ocelot_nvram_map.virt);
-
- return -ENXIO;
-}
-
-static void __exit cleanup_ocelot_maps(void)
-{
- del_mtd_device(nvram_mtd);
- map_destroy(nvram_mtd);
- iounmap((void *)ocelot_nvram_map.virt);
-
- if (parsed_parts)
- del_mtd_partitions(flash_mtd);
- else
- del_mtd_device(flash_mtd);
- map_destroy(flash_mtd);
- iounmap((void *)ocelot_flash_map.virt);
- if (ocelot_flash_map.cached)
- iounmap((void *)ocelot_flash_map.cached);
-}
-
-module_init(init_ocelot_maps);
-module_exit(cleanup_ocelot_maps);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>");
-MODULE_DESCRIPTION("MTD map driver for Momenco Ocelot board");
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index cf75a566442..aeed9ea7971 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -232,7 +232,6 @@ static int __devinit of_flash_probe(struct of_device *dev,
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
goto err_out;
- memset(info, 0, sizeof(*info));
dev_set_drvdata(&dev->dev, info);
diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c
index 7e0377ec1c4..02bde8c982e 100644
--- a/drivers/mtd/maps/pmcmsp-flash.c
+++ b/drivers/mtd/maps/pmcmsp-flash.c
@@ -73,13 +73,16 @@ int __init init_msp_flash(void)
return -ENXIO;
printk(KERN_NOTICE "Found %d PMC flash devices\n", fcnt);
- msp_flash = (struct mtd_info **)kmalloc(
- fcnt * sizeof(struct map_info *), GFP_KERNEL);
- msp_parts = (struct mtd_partition **)kmalloc(
- fcnt * sizeof(struct mtd_partition *), GFP_KERNEL);
- msp_maps = (struct map_info *)kmalloc(
- fcnt * sizeof(struct mtd_info), GFP_KERNEL);
- memset(msp_maps, 0, fcnt * sizeof(struct mtd_info));
+
+ msp_flash = kmalloc(fcnt * sizeof(struct map_info *), GFP_KERNEL);
+ msp_parts = kmalloc(fcnt * sizeof(struct mtd_partition *), GFP_KERNEL);
+ msp_maps = kcalloc(fcnt, sizeof(struct mtd_info), GFP_KERNEL);
+ if (!msp_flash || !msp_parts || !msp_maps) {
+ kfree(msp_maps);
+ kfree(msp_parts);
+ kfree(msp_flash);
+ return -ENOMEM;
+ }
/* loop over the flash devices, initializing each */
for (i = 0; i < fcnt; i++) {
@@ -95,9 +98,8 @@ int __init init_msp_flash(void)
continue;
}
- msp_parts[i] = (struct mtd_partition *)kmalloc(
- pcnt * sizeof(struct mtd_partition), GFP_KERNEL);
- memset(msp_parts[i], 0, pcnt * sizeof(struct mtd_partition));
+ msp_parts[i] = kcalloc(pcnt, sizeof(struct mtd_partition),
+ GFP_KERNEL);
/* now initialize the devices proper */
flash_name[5] = '0' + i;
diff --git a/drivers/mtd/maps/pmcmsp-ramroot.c b/drivers/mtd/maps/pmcmsp-ramroot.c
index 18049bceba8..30de5c0c09a 100644
--- a/drivers/mtd/maps/pmcmsp-ramroot.c
+++ b/drivers/mtd/maps/pmcmsp-ramroot.c
@@ -79,7 +79,6 @@ static int __init init_rrmap(void)
rr_mtd->owner = THIS_MODULE;
add_mtd_device(rr_mtd);
- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, rr_mtd->index);
return 0;
}
diff --git a/drivers/mtd/maps/pq2fads.c b/drivers/mtd/maps/pq2fads.c
deleted file mode 100644
index fb78d87cc13..00000000000
--- a/drivers/mtd/maps/pq2fads.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * drivers/mtd/maps/pq2fads.c
- *
- * Mapping for the flash SIMM on 8272ADS and PQ2FADS board
- *
- * Author: Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/ppcboot.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-/*
- NOTE: bank width and interleave relative to the installed flash
- should have been chosen within MTD_CFI_GEOMETRY options.
- */
-#define PQ2FADS_BANK_WIDTH 4
-
-static struct mtd_partition pq2fads_partitions[] = {
- {
-#ifdef CONFIG_ADS8272
- .name = "HRCW",
- .size = 0x40000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "User FS",
- .size = 0x5c0000,
- .offset = 0x40000,
-#else
- .name = "User FS",
- .size = 0x600000,
- .offset = 0,
-#endif
- }, {
- .name = "uImage",
- .size = 0x100000,
- .offset = 0x600000,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "bootloader",
- .size = 0x40000,
- .offset = 0x700000,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "bootloader env",
- .size = 0x40000,
- .offset = 0x740000,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }
-};
-
-
-/* pointer to MPC885ADS board info data */
-extern unsigned char __res[];
-
-static int __init init_pq2fads_mtd(void)
-{
- bd_t *bd = (bd_t *)__res;
- physmap_configure(bd->bi_flashstart, bd->bi_flashsize, PQ2FADS_BANK_WIDTH, NULL);
-
- physmap_set_partitions(pq2fads_partitions,
- sizeof (pq2fads_partitions) /
- sizeof (pq2fads_partitions[0]));
- return 0;
-}
-
-static void __exit cleanup_pq2fads_mtd(void)
-{
-}
-
-module_init(init_pq2fads_mtd);
-module_exit(cleanup_pq2fads_mtd);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MTD map and partitions for MPC8272ADS boards");
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
new file mode 100644
index 00000000000..cb933ac475d
--- /dev/null
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -0,0 +1,200 @@
+/*
+ * Map driver for Intel XScale PXA2xx platforms.
+ *
+ * Author: Nicolas Pitre
+ * Copyright: (C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/flash.h>
+
+static void pxa2xx_map_inval_cache(struct map_info *map, unsigned long from,
+ ssize_t len)
+{
+ consistent_sync((char *)map->cached + from, len, DMA_FROM_DEVICE);
+}
+
+struct pxa2xx_flash_info {
+ struct mtd_partition *parts;
+ int nr_parts;
+ struct mtd_info *mtd;
+ struct map_info map;
+};
+
+
+static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
+
+
+static int __init pxa2xx_flash_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct flash_platform_data *flash = pdev->dev.platform_data;
+ struct pxa2xx_flash_info *info;
+ struct mtd_partition *parts;
+ struct resource *res;
+ int ret = 0;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ info = kmalloc(sizeof(struct pxa2xx_flash_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ memset(info, 0, sizeof(struct pxa2xx_flash_info));
+ info->map.name = (char *) flash->name;
+ info->map.bankwidth = flash->width;
+ info->map.phys = res->start;
+ info->map.size = res->end - res->start + 1;
+ info->parts = flash->parts;
+ info->nr_parts = flash->nr_parts;
+
+ info->map.virt = ioremap(info->map.phys, info->map.size);
+ if (!info->map.virt) {
+ printk(KERN_WARNING "Failed to ioremap %s\n",
+ info->map.name);
+ return -ENOMEM;
+ }
+ info->map.cached =
+ ioremap_cached(info->map.phys, info->map.size);
+ if (!info->map.cached)
+ printk(KERN_WARNING "Failed to ioremap cached %s\n",
+ info->map.name);
+ info->map.inval_cache = pxa2xx_map_inval_cache;
+ simple_map_init(&info->map);
+
+ printk(KERN_NOTICE
+ "Probing %s at physical address 0x%08lx"
+ " (%d-bit bankwidth)\n",
+ info->map.name, (unsigned long)info->map.phys,
+ info->map.bankwidth * 8);
+
+ info->mtd = do_map_probe(flash->map_name, &info->map);
+
+ if (!info->mtd) {
+ iounmap((void *)info->map.virt);
+ if (info->map.cached)
+ iounmap(info->map.cached);
+ return -EIO;
+ }
+ info->mtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+ ret = parse_mtd_partitions(info->mtd, probes, &parts, 0);
+
+ if (ret > 0) {
+ info->nr_parts = ret;
+ info->parts = parts;
+ }
+#endif
+
+ if (info->nr_parts) {
+ add_mtd_partitions(info->mtd, info->parts,
+ info->nr_parts);
+ } else {
+ printk("Registering %s as whole device\n",
+ info->map.name);
+ add_mtd_device(info->mtd);
+ }
+
+ dev_set_drvdata(dev, info);
+ return 0;
+}
+
+static int __exit pxa2xx_flash_remove(struct device *dev)
+{
+ struct pxa2xx_flash_info *info = dev_get_drvdata(dev);
+
+ dev_set_drvdata(dev, NULL);
+
+#ifdef CONFIG_MTD_PARTITIONS
+ if (info->nr_parts)
+ del_mtd_partitions(info->mtd);
+ else
+#endif
+ del_mtd_device(info->mtd);
+
+ map_destroy(info->mtd);
+ iounmap(info->map.virt);
+ if (info->map.cached)
+ iounmap(info->map.cached);
+ kfree(info->parts);
+ kfree(info);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int pxa2xx_flash_suspend(struct device *dev, pm_message_t state)
+{
+ struct pxa2xx_flash_info *info = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (info->mtd && info->mtd->suspend)
+ ret = info->mtd->suspend(info->mtd);
+ return ret;
+}
+
+static int pxa2xx_flash_resume(struct device *dev)
+{
+ struct pxa2xx_flash_info *info = dev_get_drvdata(dev);
+
+ if (info->mtd && info->mtd->resume)
+ info->mtd->resume(info->mtd);
+ return 0;
+}
+static void pxa2xx_flash_shutdown(struct device *dev)
+{
+ struct pxa2xx_flash_info *info = dev_get_drvdata(dev);
+
+ if (info && info->mtd->suspend(info->mtd) == 0)
+ info->mtd->resume(info->mtd);
+}
+#else
+#define pxa2xx_flash_suspend NULL
+#define pxa2xx_flash_resume NULL
+#define pxa2xx_flash_shutdown NULL
+#endif
+
+static struct device_driver pxa2xx_flash_driver = {
+ .name = "pxa2xx-flash",
+ .bus = &platform_bus_type,
+ .probe = pxa2xx_flash_probe,
+ .remove = __exit_p(pxa2xx_flash_remove),
+ .suspend = pxa2xx_flash_suspend,
+ .resume = pxa2xx_flash_resume,
+ .shutdown = pxa2xx_flash_shutdown,
+};
+
+static int __init init_pxa2xx_flash(void)
+{
+ return driver_register(&pxa2xx_flash_driver);
+}
+
+static void __exit cleanup_pxa2xx_flash(void)
+{
+ driver_unregister(&pxa2xx_flash_driver);
+}
+
+module_init(init_pxa2xx_flash);
+module_exit(cleanup_pxa2xx_flash);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
+MODULE_DESCRIPTION("MTD map driver for Intel XScale PXA2xx");
diff --git a/drivers/mtd/maps/tqm834x.c b/drivers/mtd/maps/tqm834x.c
deleted file mode 100644
index 9adc970e55e..00000000000
--- a/drivers/mtd/maps/tqm834x.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * drivers/mtd/maps/tqm834x.c
- *
- * MTD mapping driver for TQM834x boards
- *
- * Copyright 2005 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-#include <asm/ppcboot.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#define FLASH_BANK_MAX 2
-
-extern unsigned char __res[];
-
-/* trivial struct to describe partition information */
-struct mtd_part_def
-{
- int nums;
- unsigned char *type;
- struct mtd_partition* mtd_part;
-};
-
-static struct mtd_info* mtd_banks[FLASH_BANK_MAX];
-static struct map_info* map_banks[FLASH_BANK_MAX];
-static struct mtd_part_def part_banks[FLASH_BANK_MAX];
-
-static unsigned long num_banks;
-static unsigned long start_scan_addr;
-
-#ifdef CONFIG_MTD_PARTITIONS
-/*
- * The following defines the partition layout of TQM834x boards.
- *
- * See include/linux/mtd/partitions.h for definition of the
- * mtd_partition structure.
- *
- * Assume minimal initial size of 4 MiB per bank, will be updated
- * later in init_tqm834x_mtd() routine.
- */
-
-/* Partition definition for the first flash bank which is always present. */
-static struct mtd_partition tqm834x_partitions_bank1[] = {
- {
- .name = "u-boot", /* u-boot firmware */
- .offset = 0x00000000,
- .size = 0x00040000, /* 256 KiB */
- /*mask_flags: MTD_WRITEABLE, * force read-only */
- },
- {
- .name = "env", /* u-boot environment */
- .offset = 0x00040000,
- .size = 0x00020000, /* 128 KiB */
- /*mask_flags: MTD_WRITEABLE, * force read-only */
- },
- {
- .name = "kernel", /* linux kernel image */
- .offset = 0x00060000,
- .size = 0x00100000, /* 1 MiB */
- /*mask_flags: MTD_WRITEABLE, * force read-only */
- },
- {
- .name = "initrd", /* ramdisk image */
- .offset = 0x00160000,
- .size = 0x00200000, /* 2 MiB */
- },
- {
- .name = "user", /* user data */
- .offset = 0x00360000,
- .size = 0x000a0000, /* remaining space */
- /* NOTE: this parttion size is re-calcated in */
- /* init_tqm834x_mtd() to cover actual remaining space. */
- },
-};
-
-/* Partition definition for the second flash bank which may be present on some
- * TQM834x boards.
- */
-static struct mtd_partition tqm834x_partitions_bank2[] = {
- {
- .name = "jffs2", /* jffs2 filesystem */
- .offset = 0x00000000,
- .size = 0x00400000, /* whole device */
- /* NOTE: this parttion size is re-calcated in */
- /* init_tqm834x_mtd() to cover actual device size. */
- },
-};
-
-#endif /* CONFIG_MTD_PARTITIONS */
-
-static int __init init_tqm834x_mtd(void)
-{
- int idx = 0, ret = 0;
- unsigned long flash_addr, flash_size, mtd_size = 0;
-
- /* pointer to TQM834x board info data */
- bd_t *bd = (bd_t *)__res;
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- int n;
- char mtdid[4];
- const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
- flash_addr = bd->bi_flashstart;
- flash_size = bd->bi_flashsize;
-
- /* request maximum flash size address space */
- start_scan_addr = (unsigned long)ioremap(flash_addr, flash_size);
- if (!start_scan_addr) {
- printk("%s: Failed to ioremap address: 0x%lx\n",
- __FUNCTION__, flash_addr);
- return -EIO;
- }
-
- for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
- if (mtd_size >= flash_size)
- break;
-
- pr_debug("%s: chip probing count %d\n", __FUNCTION__, idx);
-
- map_banks[idx] = kzalloc(sizeof(struct map_info), GFP_KERNEL);
- if (map_banks[idx] == NULL) {
- ret = -ENOMEM;
- goto error_mem;
- }
- map_banks[idx]->name = kzalloc(16, GFP_KERNEL);
- if (map_banks[idx]->name == NULL) {
- ret = -ENOMEM;
- goto error_mem;
- }
-
- sprintf(map_banks[idx]->name, "TQM834x-%d", idx);
- map_banks[idx]->size = flash_size;
- map_banks[idx]->bankwidth = 4;
-
- simple_map_init(map_banks[idx]);
-
- map_banks[idx]->virt = (void __iomem *)
- (start_scan_addr + ((idx > 0) ?
- (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0));
- map_banks[idx]->phys =
- flash_addr + ((idx > 0) ?
- (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0);
-
- /* start to probe flash chips */
- mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]);
- if (mtd_banks[idx]) {
- mtd_banks[idx]->owner = THIS_MODULE;
- mtd_size += mtd_banks[idx]->size;
- num_banks++;
- pr_debug("%s: bank %ld, name: %s, size: %d bytes \n",
- __FUNCTION__, num_banks,
- mtd_banks[idx]->name, mtd_banks[idx]->size);
- }
- }
-
- /* no supported flash chips found */
- if (!num_banks) {
- printk("TQM834x: No supported flash chips found!\n");
- ret = -ENXIO;
- goto error_mem;
- }
-
-#ifdef CONFIG_MTD_PARTITIONS
- /*
- * Select static partition definitions
- */
- n = ARRAY_SIZE(tqm834x_partitions_bank1);
- part_banks[0].mtd_part = tqm834x_partitions_bank1;
- part_banks[0].type = "static image bank1";
- part_banks[0].nums = n;
-
- /* update last partition size to cover actual remaining space */
- tqm834x_partitions_bank1[n - 1].size =
- mtd_banks[0]->size -
- tqm834x_partitions_bank1[n - 1].offset;
-
- /* check if we have second bank? */
- if (num_banks == 2) {
- n = ARRAY_SIZE(tqm834x_partitions_bank2);
- part_banks[1].mtd_part = tqm834x_partitions_bank2;
- part_banks[1].type = "static image bank2";
- part_banks[1].nums = n;
-
- /* update last partition size to cover actual remaining space */
- tqm834x_partitions_bank2[n - 1].size =
- mtd_banks[1]->size -
- tqm834x_partitions_bank2[n - 1].offset;
- }
-
- for(idx = 0; idx < num_banks ; idx++) {
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- sprintf(mtdid, "%d", idx);
- n = parse_mtd_partitions(mtd_banks[idx],
- part_probes,
- &part_banks[idx].mtd_part,
- 0);
- pr_debug("%s: %d command line partitions on bank %s\n",
- __FUNCTION__, n, mtdid);
- if (n > 0) {
- part_banks[idx].type = "command line";
- part_banks[idx].nums = n;
- }
-#endif /* CONFIG_MTD_CMDLINE_PARTS */
- if (part_banks[idx].nums == 0) {
- printk(KERN_NOTICE
- "TQM834x flash bank %d: no partition info "
- "available, registering whole device\n", idx);
- add_mtd_device(mtd_banks[idx]);
- } else {
- printk(KERN_NOTICE
- "TQM834x flash bank %d: Using %s partition "
- "definition\n", idx, part_banks[idx].type);
- add_mtd_partitions(mtd_banks[idx],
- part_banks[idx].mtd_part,
- part_banks[idx].nums);
- }
- }
-#else /* ! CONFIG_MTD_PARTITIONS */
- printk(KERN_NOTICE "TQM834x flash: registering %d flash banks "
- "at once\n", num_banks);
-
- for(idx = 0 ; idx < num_banks ; idx++)
- add_mtd_device(mtd_banks[idx]);
-
-#endif /* CONFIG_MTD_PARTITIONS */
-
- return 0;
-error_mem:
- for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
- if (map_banks[idx] != NULL) {
- if (map_banks[idx]->name != NULL) {
- kfree(map_banks[idx]->name);
- map_banks[idx]->name = NULL;
- }
- kfree(map_banks[idx]);
- map_banks[idx] = NULL;
- }
- }
-
- iounmap((void *)start_scan_addr);
-
- return ret;
-}
-
-static void __exit cleanup_tqm834x_mtd(void)
-{
- unsigned int idx = 0;
- for(idx = 0 ; idx < num_banks ; idx++) {
- /* destroy mtd_info previously allocated */
- if (mtd_banks[idx]) {
- del_mtd_partitions(mtd_banks[idx]);
- map_destroy(mtd_banks[idx]);
- }
-
- /* release map_info not used anymore */
- kfree(map_banks[idx]->name);
- kfree(map_banks[idx]);
- }
-
- if (start_scan_addr) {
- iounmap((void *)start_scan_addr);
- start_scan_addr = 0;
- }
-}
-
-module_init(init_tqm834x_mtd);
-module_exit(cleanup_tqm834x_mtd);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Wolfgang Denk <wd@denx.de>");
-MODULE_DESCRIPTION("MTD map driver for TQM834x boards");
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index ef89780eb9d..74d9d30edab 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -24,10 +24,9 @@
#include <linux/kthread.h>
#include <asm/uaccess.h>
-static LIST_HEAD(blktrans_majors);
+#include "mtdcore.h"
-extern struct mutex mtd_table_mutex;
-extern struct mtd_info *mtd_table[];
+static LIST_HEAD(blktrans_majors);
struct mtd_blkcore_priv {
struct task_struct *thread;
@@ -202,7 +201,7 @@ static int blktrans_ioctl(struct inode *inode, struct file *file,
}
}
-struct block_device_operations mtd_blktrans_ops = {
+static struct block_device_operations mtd_blktrans_ops = {
.owner = THIS_MODULE,
.open = blktrans_open,
.release = blktrans_release,
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index d091b2430b4..22ed96c4b7b 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -136,7 +136,8 @@ static int mtd_close(struct inode *inode, struct file *file)
DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
- if (mtd->sync)
+ /* Only sync if opened RW */
+ if ((file->f_mode & 2) && mtd->sync)
mtd->sync(mtd);
put_mtd_device(mtd);
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 41844ea0246..96be7ef62f3 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -178,7 +178,7 @@ concat_writev(struct mtd_info *mtd, const struct kvec *vecs,
/* Check alignment */
if (mtd->writesize > 1) {
- loff_t __to = to;
+ uint64_t __to = to;
if (do_div(__to, mtd->writesize) || (total_len % mtd->writesize))
return -EINVAL;
}
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index c153b64a830..6c2645e2837 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -22,6 +22,8 @@
#include <linux/mtd/mtd.h>
+#include "mtdcore.h"
+
/* These are exported solely for the purpose of mtd_blkdevs.c. You
should not use them for _anything_ else */
DEFINE_MUTEX(mtd_table_mutex);
diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h
new file mode 100644
index 00000000000..a33251f4b87
--- /dev/null
+++ b/drivers/mtd/mtdcore.h
@@ -0,0 +1,11 @@
+/* linux/drivers/mtd/mtdcore.h
+ *
+ * Header file for driver private mtdcore exports
+ *
+ */
+
+/* These are exported solely for the purpose of mtd_blkdevs.c. You
+ should not use them for _anything_ else */
+
+extern struct mutex mtd_table_mutex;
+extern struct mtd_info *mtd_table[MAX_MTD_DEVICES];
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
new file mode 100644
index 00000000000..f8af627f0b9
--- /dev/null
+++ b/drivers/mtd/mtdoops.c
@@ -0,0 +1,376 @@
+/*
+ * MTD Oops/Panic logger
+ *
+ * Copyright (C) 2007 Nokia Corporation. All rights reserved.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/vmalloc.h>
+#include <linux/workqueue.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/mtd/mtd.h>
+
+#define OOPS_PAGE_SIZE 4096
+
+static struct mtdoops_context {
+ int mtd_index;
+ struct work_struct work;
+ struct mtd_info *mtd;
+ int oops_pages;
+ int nextpage;
+ int nextcount;
+
+ void *oops_buf;
+ int ready;
+ int writecount;
+} oops_cxt;
+
+static void mtdoops_erase_callback(struct erase_info *done)
+{
+ wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+ wake_up(wait_q);
+}
+
+static int mtdoops_erase_block(struct mtd_info *mtd, int offset)
+{
+ struct erase_info erase;
+ DECLARE_WAITQUEUE(wait, current);
+ wait_queue_head_t wait_q;
+ int ret;
+
+ init_waitqueue_head(&wait_q);
+ erase.mtd = mtd;
+ erase.callback = mtdoops_erase_callback;
+ erase.addr = offset;
+ if (mtd->erasesize < OOPS_PAGE_SIZE)
+ erase.len = OOPS_PAGE_SIZE;
+ else
+ erase.len = mtd->erasesize;
+ erase.priv = (u_long)&wait_q;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&wait_q, &wait);
+
+ ret = mtd->erase(mtd, &erase);
+ if (ret) {
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&wait_q, &wait);
+ printk (KERN_WARNING "mtdoops: erase of region [0x%x, 0x%x] "
+ "on \"%s\" failed\n",
+ erase.addr, erase.len, mtd->name);
+ return ret;
+ }
+
+ schedule(); /* Wait for erase to finish. */
+ remove_wait_queue(&wait_q, &wait);
+
+ return 0;
+}
+
+static int mtdoops_inc_counter(struct mtdoops_context *cxt)
+{
+ struct mtd_info *mtd = cxt->mtd;
+ size_t retlen;
+ u32 count;
+ int ret;
+
+ cxt->nextpage++;
+ if (cxt->nextpage > cxt->oops_pages)
+ cxt->nextpage = 0;
+ cxt->nextcount++;
+ if (cxt->nextcount == 0xffffffff)
+ cxt->nextcount = 0;
+
+ ret = mtd->read(mtd, cxt->nextpage * OOPS_PAGE_SIZE, 4,
+ &retlen, (u_char *) &count);
+ if ((retlen != 4) || (ret < 0)) {
+ printk(KERN_ERR "mtdoops: Read failure at %d (%td of 4 read)"
+ ", err %d.\n", cxt->nextpage * OOPS_PAGE_SIZE,
+ retlen, ret);
+ return 1;
+ }
+
+ /* See if we need to erase the next block */
+ if (count != 0xffffffff)
+ return 1;
+
+ printk(KERN_DEBUG "mtdoops: Ready %d, %d (no erase)\n",
+ cxt->nextpage, cxt->nextcount);
+ cxt->ready = 1;
+ return 0;
+}
+
+static void mtdoops_prepare(struct mtdoops_context *cxt)
+{
+ struct mtd_info *mtd = cxt->mtd;
+ int i = 0, j, ret, mod;
+
+ /* We were unregistered */
+ if (!mtd)
+ return;
+
+ mod = (cxt->nextpage * OOPS_PAGE_SIZE) % mtd->erasesize;
+ if (mod != 0) {
+ cxt->nextpage = cxt->nextpage + ((mtd->erasesize - mod) / OOPS_PAGE_SIZE);
+ if (cxt->nextpage > cxt->oops_pages)
+ cxt->nextpage = 0;
+ }
+
+ while (mtd->block_isbad &&
+ mtd->block_isbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE)) {
+badblock:
+ printk(KERN_WARNING "mtdoops: Bad block at %08x\n",
+ cxt->nextpage * OOPS_PAGE_SIZE);
+ i++;
+ cxt->nextpage = cxt->nextpage + (mtd->erasesize / OOPS_PAGE_SIZE);
+ if (cxt->nextpage > cxt->oops_pages)
+ cxt->nextpage = 0;
+ if (i == (cxt->oops_pages / (mtd->erasesize / OOPS_PAGE_SIZE))) {
+ printk(KERN_ERR "mtdoops: All blocks bad!\n");
+ return;
+ }
+ }
+
+ for (j = 0, ret = -1; (j < 3) && (ret < 0); j++)
+ ret = mtdoops_erase_block(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
+
+ if (ret < 0) {
+ if (mtd->block_markbad)
+ mtd->block_markbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
+ goto badblock;
+ }
+
+ printk(KERN_DEBUG "mtdoops: Ready %d, %d \n", cxt->nextpage, cxt->nextcount);
+
+ cxt->ready = 1;
+}
+
+static void mtdoops_workfunc(struct work_struct *work)
+{
+ struct mtdoops_context *cxt =
+ container_of(work, struct mtdoops_context, work);
+
+ mtdoops_prepare(cxt);
+}
+
+static int find_next_position(struct mtdoops_context *cxt)
+{
+ struct mtd_info *mtd = cxt->mtd;
+ int page, maxpos = 0;
+ u32 count, maxcount = 0xffffffff;
+ size_t retlen;
+
+ for (page = 0; page < cxt->oops_pages; page++) {
+ mtd->read(mtd, page * OOPS_PAGE_SIZE, 4, &retlen, (u_char *) &count);
+ if (count == 0xffffffff)
+ continue;
+ if (maxcount == 0xffffffff) {
+ maxcount = count;
+ maxpos = page;
+ } else if ((count < 0x40000000) && (maxcount > 0xc0000000)) {
+ maxcount = count;
+ maxpos = page;
+ } else if ((count > maxcount) && (count < 0xc0000000)) {
+ maxcount = count;
+ maxpos = page;
+ } else if ((count > maxcount) && (count > 0xc0000000)
+ && (maxcount > 0x80000000)) {
+ maxcount = count;
+ maxpos = page;
+ }
+ }
+ if (maxcount == 0xffffffff) {
+ cxt->nextpage = 0;
+ cxt->nextcount = 1;
+ cxt->ready = 1;
+ printk(KERN_DEBUG "mtdoops: Ready %d, %d (first init)\n",
+ cxt->nextpage, cxt->nextcount);
+ return 0;
+ }
+
+ cxt->nextpage = maxpos;
+ cxt->nextcount = maxcount;
+
+ return mtdoops_inc_counter(cxt);
+}
+
+
+static void mtdoops_notify_add(struct mtd_info *mtd)
+{
+ struct mtdoops_context *cxt = &oops_cxt;
+ int ret;
+
+ if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
+ return;
+
+ if (mtd->size < (mtd->erasesize * 2)) {
+ printk(KERN_ERR "MTD partition %d not big enough for mtdoops\n",
+ mtd->index);
+ return;
+ }
+
+ cxt->mtd = mtd;
+ cxt->oops_pages = mtd->size / OOPS_PAGE_SIZE;
+
+ ret = find_next_position(cxt);
+ if (ret == 1)
+ mtdoops_prepare(cxt);
+
+ printk(KERN_DEBUG "mtdoops: Attached to MTD device %d\n", mtd->index);
+}
+
+static void mtdoops_notify_remove(struct mtd_info *mtd)
+{
+ struct mtdoops_context *cxt = &oops_cxt;
+
+ if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
+ return;
+
+ cxt->mtd = NULL;
+ flush_scheduled_work();
+}
+
+static void mtdoops_console_sync(void)
+{
+ struct mtdoops_context *cxt = &oops_cxt;
+ struct mtd_info *mtd = cxt->mtd;
+ size_t retlen;
+ int ret;
+
+ if (!cxt->ready || !mtd)
+ return;
+
+ if (cxt->writecount == 0)
+ return;
+
+ if (cxt->writecount < OOPS_PAGE_SIZE)
+ memset(cxt->oops_buf + cxt->writecount, 0xff,
+ OOPS_PAGE_SIZE - cxt->writecount);
+
+ ret = mtd->write(mtd, cxt->nextpage * OOPS_PAGE_SIZE,
+ OOPS_PAGE_SIZE, &retlen, cxt->oops_buf);
+ cxt->ready = 0;
+ cxt->writecount = 0;
+
+ if ((retlen != OOPS_PAGE_SIZE) || (ret < 0))
+ printk(KERN_ERR "mtdoops: Write failure at %d (%td of %d written), err %d.\n",
+ cxt->nextpage * OOPS_PAGE_SIZE, retlen, OOPS_PAGE_SIZE, ret);
+
+ ret = mtdoops_inc_counter(cxt);
+ if (ret == 1)
+ schedule_work(&cxt->work);
+}
+
+static void
+mtdoops_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct mtdoops_context *cxt = co->data;
+ struct mtd_info *mtd = cxt->mtd;
+ int i;
+
+ if (!oops_in_progress) {
+ mtdoops_console_sync();
+ return;
+ }
+
+ if (!cxt->ready || !mtd)
+ return;
+
+ if (cxt->writecount == 0) {
+ u32 *stamp = cxt->oops_buf;
+ *stamp = cxt->nextcount;
+ cxt->writecount = 4;
+ }
+
+ if ((count + cxt->writecount) > OOPS_PAGE_SIZE)
+ count = OOPS_PAGE_SIZE - cxt->writecount;
+
+ for (i = 0; i < count; i++, s++)
+ *((char *)(cxt->oops_buf) + cxt->writecount + i) = *s;
+
+ cxt->writecount = cxt->writecount + count;
+}
+
+static int __init mtdoops_console_setup(struct console *co, char *options)
+{
+ struct mtdoops_context *cxt = co->data;
+
+ if (cxt->mtd_index != -1)
+ return -EBUSY;
+ if (co->index == -1)
+ return -EINVAL;
+
+ cxt->mtd_index = co->index;
+ return 0;
+}
+
+static struct mtd_notifier mtdoops_notifier = {
+ .add = mtdoops_notify_add,
+ .remove = mtdoops_notify_remove,
+};
+
+static struct console mtdoops_console = {
+ .name = "ttyMTD",
+ .write = mtdoops_console_write,
+ .setup = mtdoops_console_setup,
+ .unblank = mtdoops_console_sync,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &oops_cxt,
+};
+
+static int __init mtdoops_console_init(void)
+{
+ struct mtdoops_context *cxt = &oops_cxt;
+
+ cxt->mtd_index = -1;
+ cxt->oops_buf = vmalloc(OOPS_PAGE_SIZE);
+
+ if (!cxt->oops_buf) {
+ printk(KERN_ERR "Failed to allocate oops buffer workspace\n");
+ return -ENOMEM;
+ }
+
+ INIT_WORK(&cxt->work, mtdoops_workfunc);
+
+ register_console(&mtdoops_console);
+ register_mtd_user(&mtdoops_notifier);
+ return 0;
+}
+
+static void __exit mtdoops_console_exit(void)
+{
+ struct mtdoops_context *cxt = &oops_cxt;
+
+ unregister_mtd_user(&mtdoops_notifier);
+ unregister_console(&mtdoops_console);
+ vfree(cxt->oops_buf);
+}
+
+
+subsys_initcall(mtdoops_console_init);
+module_exit(mtdoops_console_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("MTD Oops/Panic console logger/driver");
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index f1d60b6f048..8f9c3baeb38 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -91,6 +91,25 @@ config MTD_NAND_AU1550
This enables the driver for the NAND flash controller on the
AMD/Alchemy 1550 SOC.
+config MTD_NAND_BF5XX
+ tristate "Blackfin on-chip NAND Flash Controller driver"
+ depends on BF54x && MTD_NAND
+ help
+ This enables the Blackfin on-chip NAND flash controller
+
+ No board specific support is done by this driver, each board
+ must advertise a platform_device for the driver to attach.
+
+ This driver can also be built as a module. If so, the module
+ will be called bf5xx-nand.
+
+config MTD_NAND_BF5XX_HWECC
+ bool "BF5XX NAND Hardware ECC"
+ depends on MTD_NAND_BF5XX
+ help
+ Enable the use of the BF5XX's internal ECC generator when
+ using NAND.
+
config MTD_NAND_RTC_FROM4
tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
depends on SH_SOLUTION_ENGINE
@@ -134,10 +153,10 @@ config MTD_NAND_S3C2410_HWECC
config MTD_NAND_NDFC
tristate "NDFC NanD Flash Controller"
- depends on 44x
+ depends on 4xx && !PPC_MERGE
select MTD_NAND_ECC_SMC
help
- NDFC Nand Flash Controllers are integrated in EP44x SoCs
+ NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
config MTD_NAND_S3C2410_CLKSTOP
bool "S3C2410 NAND IDLE clock stop"
@@ -237,7 +256,7 @@ config MTD_NAND_CAFE
select REED_SOLOMON
select REED_SOLOMON_DEC16
help
- Use NAND flash attached to the CAFÉ chip designed for the $100
+ Use NAND flash attached to the CAFÉ chip designed for the OLPC
laptop.
config MTD_NAND_CS553X
@@ -280,5 +299,11 @@ config MTD_NAND_PLATFORM
devices. You will need to provide platform-specific functions
via platform_data.
+config MTD_ALAUDA
+ tristate "MTD driver for Olympus MAUSB-10 and Fijufilm DPC-R1"
+ depends on MTD_NAND && USB
+ help
+ These two (and possibly other) Alauda-based cardreaders for
+ SmartMedia and xD allow raw flash access.
endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index edba1db14bf..3ad6c0165da 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
+obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o
@@ -27,5 +28,6 @@ obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
+obj-$(CONFIG_MTD_ALAUDA) += alauda.o
nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c
new file mode 100644
index 00000000000..257937cd99b
--- /dev/null
+++ b/drivers/mtd/nand/alauda.c
@@ -0,0 +1,742 @@
+/*
+ * MTD driver for Alauda chips
+ *
+ * Copyright (C) 2007 Joern Engel <joern@logfs.org>
+ *
+ * Based on drivers/usb/usb-skeleton.c which is:
+ * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ * and on drivers/usb/storage/alauda.c, which is:
+ * (c) 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * Idea and initial work by Arnd Bergmann <arnd@arndb.de>
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand_ecc.h>
+
+/* Control commands */
+#define ALAUDA_GET_XD_MEDIA_STATUS 0x08
+#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a
+#define ALAUDA_GET_XD_MEDIA_SIG 0x86
+
+/* Common prefix */
+#define ALAUDA_BULK_CMD 0x40
+
+/* The two ports */
+#define ALAUDA_PORT_XD 0x00
+#define ALAUDA_PORT_SM 0x01
+
+/* Bulk commands */
+#define ALAUDA_BULK_READ_PAGE 0x84
+#define ALAUDA_BULK_READ_OOB 0x85 /* don't use, there's a chip bug */
+#define ALAUDA_BULK_READ_BLOCK 0x94
+#define ALAUDA_BULK_ERASE_BLOCK 0xa3
+#define ALAUDA_BULK_WRITE_PAGE 0xa4
+#define ALAUDA_BULK_WRITE_BLOCK 0xb4
+#define ALAUDA_BULK_RESET_MEDIA 0xe0
+
+/* Address shifting */
+#define PBA_LO(pba) ((pba & 0xF) << 5)
+#define PBA_HI(pba) (pba >> 3)
+#define PBA_ZONE(pba) (pba >> 11)
+
+#define TIMEOUT HZ
+
+static struct usb_device_id alauda_table [] = {
+ { USB_DEVICE(0x0584, 0x0008) }, /* Fujifilm DPC-R1 */
+ { USB_DEVICE(0x07b4, 0x010a) }, /* Olympus MAUSB-10 */
+ { }
+};
+MODULE_DEVICE_TABLE(usb, alauda_table);
+
+struct alauda_card {
+ u8 id; /* id byte */
+ u8 chipshift; /* 1<<chipshift total size */
+ u8 pageshift; /* 1<<pageshift page size */
+ u8 blockshift; /* 1<<blockshift block size */
+};
+
+struct alauda {
+ struct usb_device *dev;
+ struct usb_interface *interface;
+ struct mtd_info *mtd;
+ struct alauda_card *card;
+ struct mutex card_mutex;
+ u32 pagemask;
+ u32 bytemask;
+ u32 blockmask;
+ unsigned int write_out;
+ unsigned int bulk_in;
+ unsigned int bulk_out;
+ u8 port;
+ struct kref kref;
+};
+
+static struct alauda_card alauda_card_ids[] = {
+ /* NAND flash */
+ { 0x6e, 20, 8, 12}, /* 1 MB */
+ { 0xe8, 20, 8, 12}, /* 1 MB */
+ { 0xec, 20, 8, 12}, /* 1 MB */
+ { 0x64, 21, 8, 12}, /* 2 MB */
+ { 0xea, 21, 8, 12}, /* 2 MB */
+ { 0x6b, 22, 9, 13}, /* 4 MB */
+ { 0xe3, 22, 9, 13}, /* 4 MB */
+ { 0xe5, 22, 9, 13}, /* 4 MB */
+ { 0xe6, 23, 9, 13}, /* 8 MB */
+ { 0x73, 24, 9, 14}, /* 16 MB */
+ { 0x75, 25, 9, 14}, /* 32 MB */
+ { 0x76, 26, 9, 14}, /* 64 MB */
+ { 0x79, 27, 9, 14}, /* 128 MB */
+ { 0x71, 28, 9, 14}, /* 256 MB */
+
+ /* MASK ROM */
+ { 0x5d, 21, 9, 13}, /* 2 MB */
+ { 0xd5, 22, 9, 13}, /* 4 MB */
+ { 0xd6, 23, 9, 13}, /* 8 MB */
+ { 0x57, 24, 9, 13}, /* 16 MB */
+ { 0x58, 25, 9, 13}, /* 32 MB */
+ { }
+};
+
+static struct alauda_card *get_card(u8 id)
+{
+ struct alauda_card *card;
+
+ for (card = alauda_card_ids; card->id; card++)
+ if (card->id == id)
+ return card;
+ return NULL;
+}
+
+static void alauda_delete(struct kref *kref)
+{
+ struct alauda *al = container_of(kref, struct alauda, kref);
+
+ if (al->mtd) {
+ del_mtd_device(al->mtd);
+ kfree(al->mtd);
+ }
+ usb_put_dev(al->dev);
+ kfree(al);
+}
+
+static int alauda_get_media_status(struct alauda *al, void *buf)
+{
+ int ret;
+
+ mutex_lock(&al->card_mutex);
+ ret = usb_control_msg(al->dev, usb_rcvctrlpipe(al->dev, 0),
+ ALAUDA_GET_XD_MEDIA_STATUS, 0xc0, 0, 1, buf, 2, HZ);
+ mutex_unlock(&al->card_mutex);
+ return ret;
+}
+
+static int alauda_ack_media(struct alauda *al)
+{
+ int ret;
+
+ mutex_lock(&al->card_mutex);
+ ret = usb_control_msg(al->dev, usb_sndctrlpipe(al->dev, 0),
+ ALAUDA_ACK_XD_MEDIA_CHANGE, 0x40, 0, 1, NULL, 0, HZ);
+ mutex_unlock(&al->card_mutex);
+ return ret;
+}
+
+static int alauda_get_media_signatures(struct alauda *al, void *buf)
+{
+ int ret;
+
+ mutex_lock(&al->card_mutex);
+ ret = usb_control_msg(al->dev, usb_rcvctrlpipe(al->dev, 0),
+ ALAUDA_GET_XD_MEDIA_SIG, 0xc0, 0, 0, buf, 4, HZ);
+ mutex_unlock(&al->card_mutex);
+ return ret;
+}
+
+static void alauda_reset(struct alauda *al)
+{
+ u8 command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_RESET_MEDIA, 0, 0,
+ 0, 0, 0, 0, al->port
+ };
+ mutex_lock(&al->card_mutex);
+ usb_bulk_msg(al->dev, al->bulk_out, command, 9, NULL, HZ);
+ mutex_unlock(&al->card_mutex);
+}
+
+static void correct_data(void *buf, void *read_ecc,
+ int *corrected, int *uncorrected)
+{
+ u8 calc_ecc[3];
+ int err;
+
+ nand_calculate_ecc(NULL, buf, calc_ecc);
+ err = nand_correct_data(NULL, buf, read_ecc, calc_ecc);
+ if (err) {
+ if (err > 0)
+ (*corrected)++;
+ else
+ (*uncorrected)++;
+ }
+}
+
+struct alauda_sg_request {
+ struct urb *urb[3];
+ struct completion comp;
+};
+
+static void alauda_complete(struct urb *urb)
+{
+ struct completion *comp = urb->context;
+
+ if (comp)
+ complete(comp);
+}
+
+static int __alauda_read_page(struct mtd_info *mtd, loff_t from, void *buf,
+ void *oob)
+{
+ struct alauda_sg_request sg;
+ struct alauda *al = mtd->priv;
+ u32 pba = from >> al->card->blockshift;
+ u32 page = (from >> al->card->pageshift) & al->pagemask;
+ u8 command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_READ_PAGE, PBA_HI(pba),
+ PBA_ZONE(pba), 0, PBA_LO(pba) + page, 1, 0, al->port
+ };
+ int i, err;
+
+ for (i=0; i<3; i++)
+ sg.urb[i] = NULL;
+
+ err = -ENOMEM;
+ for (i=0; i<3; i++) {
+ sg.urb[i] = usb_alloc_urb(0, GFP_NOIO);
+ if (!sg.urb[i])
+ goto out;
+ }
+ init_completion(&sg.comp);
+ usb_fill_bulk_urb(sg.urb[0], al->dev, al->bulk_out, command, 9,
+ alauda_complete, NULL);
+ usb_fill_bulk_urb(sg.urb[1], al->dev, al->bulk_in, buf, mtd->writesize,
+ alauda_complete, NULL);
+ usb_fill_bulk_urb(sg.urb[2], al->dev, al->bulk_in, oob, 16,
+ alauda_complete, &sg.comp);
+
+ mutex_lock(&al->card_mutex);
+ for (i=0; i<3; i++) {
+ err = usb_submit_urb(sg.urb[i], GFP_NOIO);
+ if (err)
+ goto cancel;
+ }
+ if (!wait_for_completion_timeout(&sg.comp, TIMEOUT)) {
+ err = -ETIMEDOUT;
+cancel:
+ for (i=0; i<3; i++) {
+ usb_kill_urb(sg.urb[i]);
+ }
+ }
+ mutex_unlock(&al->card_mutex);
+
+out:
+ usb_free_urb(sg.urb[0]);
+ usb_free_urb(sg.urb[1]);
+ usb_free_urb(sg.urb[2]);
+ return err;
+}
+
+static int alauda_read_page(struct mtd_info *mtd, loff_t from,
+ void *buf, u8 *oob, int *corrected, int *uncorrected)
+{
+ int err;
+
+ err = __alauda_read_page(mtd, from, buf, oob);
+ if (err)
+ return err;
+ correct_data(buf, oob+13, corrected, uncorrected);
+ correct_data(buf+256, oob+8, corrected, uncorrected);
+ return 0;
+}
+
+static int alauda_write_page(struct mtd_info *mtd, loff_t to, void *buf,
+ void *oob)
+{
+ struct alauda_sg_request sg;
+ struct alauda *al = mtd->priv;
+ u32 pba = to >> al->card->blockshift;
+ u32 page = (to >> al->card->pageshift) & al->pagemask;
+ u8 command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_PAGE, PBA_HI(pba),
+ PBA_ZONE(pba), 0, PBA_LO(pba) + page, 32, 0, al->port
+ };
+ int i, err;
+
+ for (i=0; i<3; i++)
+ sg.urb[i] = NULL;
+
+ err = -ENOMEM;
+ for (i=0; i<3; i++) {
+ sg.urb[i] = usb_alloc_urb(0, GFP_NOIO);
+ if (!sg.urb[i])
+ goto out;
+ }
+ init_completion(&sg.comp);
+ usb_fill_bulk_urb(sg.urb[0], al->dev, al->bulk_out, command, 9,
+ alauda_complete, NULL);
+ usb_fill_bulk_urb(sg.urb[1], al->dev, al->write_out, buf,mtd->writesize,
+ alauda_complete, NULL);
+ usb_fill_bulk_urb(sg.urb[2], al->dev, al->write_out, oob, 16,
+ alauda_complete, &sg.comp);
+
+ mutex_lock(&al->card_mutex);
+ for (i=0; i<3; i++) {
+ err = usb_submit_urb(sg.urb[i], GFP_NOIO);
+ if (err)
+ goto cancel;
+ }
+ if (!wait_for_completion_timeout(&sg.comp, TIMEOUT)) {
+ err = -ETIMEDOUT;
+cancel:
+ for (i=0; i<3; i++) {
+ usb_kill_urb(sg.urb[i]);
+ }
+ }
+ mutex_unlock(&al->card_mutex);
+
+out:
+ usb_free_urb(sg.urb[0]);
+ usb_free_urb(sg.urb[1]);
+ usb_free_urb(sg.urb[2]);
+ return err;
+}
+
+static int alauda_erase_block(struct mtd_info *mtd, loff_t ofs)
+{
+ struct alauda_sg_request sg;
+ struct alauda *al = mtd->priv;
+ u32 pba = ofs >> al->card->blockshift;
+ u8 command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba),
+ PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, al->port
+ };
+ u8 buf[2];
+ int i, err;
+
+ for (i=0; i<2; i++)
+ sg.urb[i] = NULL;
+
+ err = -ENOMEM;
+ for (i=0; i<2; i++) {
+ sg.urb[i] = usb_alloc_urb(0, GFP_NOIO);
+ if (!sg.urb[i])
+ goto out;
+ }
+ init_completion(&sg.comp);
+ usb_fill_bulk_urb(sg.urb[0], al->dev, al->bulk_out, command, 9,
+ alauda_complete, NULL);
+ usb_fill_bulk_urb(sg.urb[1], al->dev, al->bulk_in, buf, 2,
+ alauda_complete, &sg.comp);
+
+ mutex_lock(&al->card_mutex);
+ for (i=0; i<2; i++) {
+ err = usb_submit_urb(sg.urb[i], GFP_NOIO);
+ if (err)
+ goto cancel;
+ }
+ if (!wait_for_completion_timeout(&sg.comp, TIMEOUT)) {
+ err = -ETIMEDOUT;
+cancel:
+ for (i=0; i<2; i++) {
+ usb_kill_urb(sg.urb[i]);
+ }
+ }
+ mutex_unlock(&al->card_mutex);
+
+out:
+ usb_free_urb(sg.urb[0]);
+ usb_free_urb(sg.urb[1]);
+ return err;
+}
+
+static int alauda_read_oob(struct mtd_info *mtd, loff_t from, void *oob)
+{
+ static u8 ignore_buf[512]; /* write only */
+
+ return __alauda_read_page(mtd, from, ignore_buf, oob);
+}
+
+static int popcount8(u8 c)
+{
+ int ret = 0;
+
+ for ( ; c; c>>=1)
+ ret += c & 1;
+ return ret;
+}
+
+static int alauda_isbad(struct mtd_info *mtd, loff_t ofs)
+{
+ u8 oob[16];
+ int err;
+
+ err = alauda_read_oob(mtd, ofs, oob);
+ if (err)
+ return err;
+
+ /* A block is marked bad if two or more bits are zero */
+ return popcount8(oob[5]) >= 7 ? 0 : 1;
+}
+
+static int alauda_bounce_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct alauda *al = mtd->priv;
+ void *bounce_buf;
+ int err, corrected=0, uncorrected=0;
+
+ bounce_buf = kmalloc(mtd->writesize, GFP_KERNEL);
+ if (!bounce_buf)
+ return -ENOMEM;
+
+ *retlen = len;
+ while (len) {
+ u8 oob[16];
+ size_t byte = from & al->bytemask;
+ size_t cplen = min(len, mtd->writesize - byte);
+
+ err = alauda_read_page(mtd, from, bounce_buf, oob,
+ &corrected, &uncorrected);
+ if (err)
+ goto out;
+
+ memcpy(buf, bounce_buf + byte, cplen);
+ buf += cplen;
+ from += cplen;
+ len -= cplen;
+ }
+ err = 0;
+ if (corrected)
+ err = -EUCLEAN;
+ if (uncorrected)
+ err = -EBADMSG;
+out:
+ kfree(bounce_buf);
+ return err;
+}
+
+static int alauda_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct alauda *al = mtd->priv;
+ int err, corrected=0, uncorrected=0;
+
+ if ((from & al->bytemask) || (len & al->bytemask))
+ return alauda_bounce_read(mtd, from, len, retlen, buf);
+
+ *retlen = len;
+ while (len) {
+ u8 oob[16];
+
+ err = alauda_read_page(mtd, from, buf, oob,
+ &corrected, &uncorrected);
+ if (err)
+ return err;
+
+ buf += mtd->writesize;
+ from += mtd->writesize;
+ len -= mtd->writesize;
+ }
+ err = 0;
+ if (corrected)
+ err = -EUCLEAN;
+ if (uncorrected)
+ err = -EBADMSG;
+ return err;
+}
+
+static int alauda_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct alauda *al = mtd->priv;
+ int err;
+
+ if ((to & al->bytemask) || (len & al->bytemask))
+ return -EINVAL;
+
+ *retlen = len;
+ while (len) {
+ u32 page = (to >> al->card->pageshift) & al->pagemask;
+ u8 oob[16] = { 'h', 'e', 'l', 'l', 'o', 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
+ /* don't write to bad blocks */
+ if (page == 0) {
+ err = alauda_isbad(mtd, to);
+ if (err) {
+ return -EIO;
+ }
+ }
+ nand_calculate_ecc(mtd, buf, &oob[13]);
+ nand_calculate_ecc(mtd, buf+256, &oob[8]);
+
+ err = alauda_write_page(mtd, to, (void*)buf, oob);
+ if (err)
+ return err;
+
+ buf += mtd->writesize;
+ to += mtd->writesize;
+ len -= mtd->writesize;
+ }
+ return 0;
+}
+
+static int __alauda_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct alauda *al = mtd->priv;
+ u32 ofs = instr->addr;
+ u32 len = instr->len;
+ int err;
+
+ if ((ofs & al->blockmask) || (len & al->blockmask))
+ return -EINVAL;
+
+ while (len) {
+ /* don't erase bad blocks */
+ err = alauda_isbad(mtd, ofs);
+ if (err > 0)
+ err = -EIO;
+ if (err < 0)
+ return err;
+
+ err = alauda_erase_block(mtd, ofs);
+ if (err < 0)
+ return err;
+
+ ofs += mtd->erasesize;
+ len -= mtd->erasesize;
+ }
+ return 0;
+}
+
+static int alauda_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ int err;
+
+ err = __alauda_erase(mtd, instr);
+ instr->state = err ? MTD_ERASE_FAILED : MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+ return err;
+}
+
+static int alauda_init_media(struct alauda *al)
+{
+ u8 buf[4], *b0=buf, *b1=buf+1;
+ struct alauda_card *card;
+ struct mtd_info *mtd;
+ int err;
+
+ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
+ if (!mtd)
+ return -ENOMEM;
+
+ for (;;) {
+ err = alauda_get_media_status(al, buf);
+ if (err < 0)
+ goto error;
+ if (*b0 & 0x10)
+ break;
+ msleep(20);
+ }
+
+ err = alauda_ack_media(al);
+ if (err)
+ goto error;
+
+ msleep(10);
+
+ err = alauda_get_media_status(al, buf);
+ if (err < 0)
+ goto error;
+
+ if (*b0 != 0x14) {
+ /* media not ready */
+ err = -EIO;
+ goto error;
+ }
+ err = alauda_get_media_signatures(al, buf);
+ if (err < 0)
+ goto error;
+
+ card = get_card(*b1);
+ if (!card) {
+ printk(KERN_ERR"Alauda: unknown card id %02x\n", *b1);
+ err = -EIO;
+ goto error;
+ }
+ printk(KERN_INFO"pagesize=%x\nerasesize=%x\nsize=%xMiB\n",
+ 1<<card->pageshift, 1<<card->blockshift,
+ 1<<(card->chipshift-20));
+ al->card = card;
+ al->pagemask = (1 << (card->blockshift - card->pageshift)) - 1;
+ al->bytemask = (1 << card->pageshift) - 1;
+ al->blockmask = (1 << card->blockshift) - 1;
+
+ mtd->name = "alauda";
+ mtd->size = 1<<card->chipshift;
+ mtd->erasesize = 1<<card->blockshift;
+ mtd->writesize = 1<<card->pageshift;
+ mtd->type = MTD_NANDFLASH;
+ mtd->flags = MTD_CAP_NANDFLASH;
+ mtd->read = alauda_read;
+ mtd->write = alauda_write;
+ mtd->erase = alauda_erase;
+ mtd->block_isbad = alauda_isbad;
+ mtd->priv = al;
+ mtd->owner = THIS_MODULE;
+
+ err = add_mtd_device(mtd);
+ if (err) {
+ err = -ENFILE;
+ goto error;
+ }
+
+ al->mtd = mtd;
+ alauda_reset(al); /* no clue whether this is necessary */
+ return 0;
+error:
+ kfree(mtd);
+ return err;
+}
+
+static int alauda_check_media(struct alauda *al)
+{
+ u8 buf[2], *b0 = buf, *b1 = buf+1;
+ int err;
+
+ err = alauda_get_media_status(al, buf);
+ if (err < 0)
+ return err;
+
+ if ((*b1 & 0x01) == 0) {
+ /* door open */
+ return -EIO;
+ }
+ if ((*b0 & 0x80) || ((*b0 & 0x1F) == 0x10)) {
+ /* no media ? */
+ return -EIO;
+ }
+ if (*b0 & 0x08) {
+ /* media change ? */
+ return alauda_init_media(al);
+ }
+ return 0;
+}
+
+static int alauda_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct alauda *al;
+ struct usb_host_interface *iface;
+ struct usb_endpoint_descriptor *ep,
+ *ep_in=NULL, *ep_out=NULL, *ep_wr=NULL;
+ int i, err = -ENOMEM;
+
+ al = kzalloc(2*sizeof(*al), GFP_KERNEL);
+ if (!al)
+ goto error;
+
+ kref_init(&al->kref);
+ usb_set_intfdata(interface, al);
+
+ al->dev = usb_get_dev(interface_to_usbdev(interface));
+ al->interface = interface;
+
+ iface = interface->cur_altsetting;
+ for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
+ ep = &iface->endpoint[i].desc;
+
+ if (usb_endpoint_is_bulk_in(ep)) {
+ ep_in = ep;
+ } else if (usb_endpoint_is_bulk_out(ep)) {
+ if (i==0)
+ ep_wr = ep;
+ else
+ ep_out = ep;
+ }
+ }
+ err = -EIO;
+ if (!ep_wr || !ep_in || !ep_out)
+ goto error;
+
+ al->write_out = usb_sndbulkpipe(al->dev,
+ ep_wr->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+ al->bulk_in = usb_rcvbulkpipe(al->dev,
+ ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+ al->bulk_out = usb_sndbulkpipe(al->dev,
+ ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+
+ /* second device is identical up to now */
+ memcpy(al+1, al, sizeof(*al));
+
+ mutex_init(&al[0].card_mutex);
+ mutex_init(&al[1].card_mutex);
+
+ al[0].port = ALAUDA_PORT_XD;
+ al[1].port = ALAUDA_PORT_SM;
+
+ info("alauda probed");
+ alauda_check_media(al);
+ alauda_check_media(al+1);
+
+ return 0;
+
+error:
+ if (al)
+ kref_put(&al->kref, alauda_delete);
+ return err;
+}
+
+static void alauda_disconnect(struct usb_interface *interface)
+{
+ struct alauda *al;
+
+ al = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ /* FIXME: prevent more I/O from starting */
+
+ /* decrement our usage count */
+ if (al)
+ kref_put(&al->kref, alauda_delete);
+
+ info("alauda gone");
+}
+
+static struct usb_driver alauda_driver = {
+ .name = "alauda",
+ .probe = alauda_probe,
+ .disconnect = alauda_disconnect,
+ .id_table = alauda_table,
+};
+
+static int __init alauda_init(void)
+{
+ return usb_register(&alauda_driver);
+}
+
+static void __exit alauda_exit(void)
+{
+ usb_deregister(&alauda_driver);
+}
+
+module_init(alauda_init);
+module_exit(alauda_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
new file mode 100644
index 00000000000..1657ecd7488
--- /dev/null
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -0,0 +1,788 @@
+/* linux/drivers/mtd/nand/bf5xx_nand.c
+ *
+ * Copyright 2006-2007 Analog Devices Inc.
+ * http://blackfin.uclinux.org/
+ * Bryan Wu <bryan.wu@analog.com>
+ *
+ * Blackfin BF5xx on-chip NAND flash controler driver
+ *
+ * Derived from drivers/mtd/nand/s3c2410.c
+ * Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk>
+ *
+ * Derived from drivers/mtd/nand/cafe.c
+ * Copyright © 2006 Red Hat, Inc.
+ * Copyright © 2006 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Changelog:
+ * 12-Jun-2007 Bryan Wu: Initial version
+ * 18-Jul-2007 Bryan Wu:
+ * - ECC_HW and ECC_SW supported
+ * - DMA supported in ECC_HW
+ * - YAFFS tested as rootfs in both ECC_HW and ECC_SW
+ *
+ * TODO:
+ * Enable JFFS2 over NAND as rootfs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+#include <asm/cacheflush.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+
+#define DRV_NAME "bf5xx-nand"
+#define DRV_VERSION "1.2"
+#define DRV_AUTHOR "Bryan Wu <bryan.wu@analog.com>"
+#define DRV_DESC "BF5xx on-chip NAND FLash Controller Driver"
+
+#ifdef CONFIG_MTD_NAND_BF5XX_HWECC
+static int hardware_ecc = 1;
+#else
+static int hardware_ecc;
+#endif
+
+static unsigned short bfin_nfc_pin_req[] = {P_NAND_CE, P_NAND_RB, 0};
+
+/*
+ * Data structures for bf5xx nand flash controller driver
+ */
+
+/* bf5xx nand info */
+struct bf5xx_nand_info {
+ /* mtd info */
+ struct nand_hw_control controller;
+ struct mtd_info mtd;
+ struct nand_chip chip;
+
+ /* platform info */
+ struct bf5xx_nand_platform *platform;
+
+ /* device info */
+ struct device *device;
+
+ /* DMA stuff */
+ struct completion dma_completion;
+};
+
+/*
+ * Conversion functions
+ */
+static struct bf5xx_nand_info *mtd_to_nand_info(struct mtd_info *mtd)
+{
+ return container_of(mtd, struct bf5xx_nand_info, mtd);
+}
+
+static struct bf5xx_nand_info *to_nand_info(struct platform_device *pdev)
+{
+ return platform_get_drvdata(pdev);
+}
+
+static struct bf5xx_nand_platform *to_nand_plat(struct platform_device *pdev)
+{
+ return pdev->dev.platform_data;
+}
+
+/*
+ * struct nand_chip interface function pointers
+ */
+
+/*
+ * bf5xx_nand_hwcontrol
+ *
+ * Issue command and address cycles to the chip
+ */
+static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ while (bfin_read_NFC_STAT() & WB_FULL)
+ cpu_relax();
+
+ if (ctrl & NAND_CLE)
+ bfin_write_NFC_CMD(cmd);
+ else
+ bfin_write_NFC_ADDR(cmd);
+ SSYNC();
+}
+
+/*
+ * bf5xx_nand_devready()
+ *
+ * returns 0 if the nand is busy, 1 if it is ready
+ */
+static int bf5xx_nand_devready(struct mtd_info *mtd)
+{
+ unsigned short val = bfin_read_NFC_IRQSTAT();
+
+ if ((val & NBUSYIRQ) == NBUSYIRQ)
+ return 1;
+ else
+ return 0;
+}
+
+/*
+ * ECC functions
+ * These allow the bf5xx to use the controller's ECC
+ * generator block to ECC the data as it passes through
+ */
+
+/*
+ * ECC error correction function
+ */
+static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
+ u32 syndrome[5];
+ u32 calced, stored;
+ int i;
+ unsigned short failing_bit, failing_byte;
+ u_char data;
+
+ calced = calc_ecc[0] | (calc_ecc[1] << 8) | (calc_ecc[2] << 16);
+ stored = read_ecc[0] | (read_ecc[1] << 8) | (read_ecc[2] << 16);
+
+ syndrome[0] = (calced ^ stored);
+
+ /*
+ * syndrome 0: all zero
+ * No error in data
+ * No action
+ */
+ if (!syndrome[0] || !calced || !stored)
+ return 0;
+
+ /*
+ * sysdrome 0: only one bit is one
+ * ECC data was incorrect
+ * No action
+ */
+ if (hweight32(syndrome[0]) == 1) {
+ dev_err(info->device, "ECC data was incorrect!\n");
+ return 1;
+ }
+
+ syndrome[1] = (calced & 0x7FF) ^ (stored & 0x7FF);
+ syndrome[2] = (calced & 0x7FF) ^ ((calced >> 11) & 0x7FF);
+ syndrome[3] = (stored & 0x7FF) ^ ((stored >> 11) & 0x7FF);
+ syndrome[4] = syndrome[2] ^ syndrome[3];
+
+ for (i = 0; i < 5; i++)
+ dev_info(info->device, "syndrome[%d] 0x%08x\n", i, syndrome[i]);
+
+ dev_info(info->device,
+ "calced[0x%08x], stored[0x%08x]\n",
+ calced, stored);
+
+ /*
+ * sysdrome 0: exactly 11 bits are one, each parity
+ * and parity' pair is 1 & 0 or 0 & 1.
+ * 1-bit correctable error
+ * Correct the error
+ */
+ if (hweight32(syndrome[0]) == 11 && syndrome[4] == 0x7FF) {
+ dev_info(info->device,
+ "1-bit correctable error, correct it.\n");
+ dev_info(info->device,
+ "syndrome[1] 0x%08x\n", syndrome[1]);
+
+ failing_bit = syndrome[1] & 0x7;
+ failing_byte = syndrome[1] >> 0x3;
+ data = *(dat + failing_byte);
+ data = data ^ (0x1 << failing_bit);
+ *(dat + failing_byte) = data;
+
+ return 0;
+ }
+
+ /*
+ * sysdrome 0: random data
+ * More than 1-bit error, non-correctable error
+ * Discard data, mark bad block
+ */
+ dev_err(info->device,
+ "More than 1-bit error, non-correctable error.\n");
+ dev_err(info->device,
+ "Please discard data, mark bad block\n");
+
+ return 1;
+}
+
+static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
+ struct bf5xx_nand_platform *plat = info->platform;
+ unsigned short page_size = (plat->page_size ? 512 : 256);
+ int ret;
+
+ ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
+
+ /* If page size is 512, correct second 256 bytes */
+ if (page_size == 512) {
+ dat += 256;
+ read_ecc += 8;
+ calc_ecc += 8;
+ ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
+ }
+
+ return ret;
+}
+
+static void bf5xx_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ return;
+}
+
+static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_code)
+{
+ struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
+ struct bf5xx_nand_platform *plat = info->platform;
+ u16 page_size = (plat->page_size ? 512 : 256);
+ u16 ecc0, ecc1;
+ u32 code[2];
+ u8 *p;
+ int bytes = 3, i;
+
+ /* first 4 bytes ECC code for 256 page size */
+ ecc0 = bfin_read_NFC_ECC0();
+ ecc1 = bfin_read_NFC_ECC1();
+
+ code[0] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+
+ dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
+
+ /* second 4 bytes ECC code for 512 page size */
+ if (page_size == 512) {
+ ecc0 = bfin_read_NFC_ECC2();
+ ecc1 = bfin_read_NFC_ECC3();
+ code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+ bytes = 6;
+ dev_dbg(info->device, "returning ecc 0x%08x\n", code[1]);
+ }
+
+ p = (u8 *)code;
+ for (i = 0; i < bytes; i++)
+ ecc_code[i] = p[i];
+
+ return 0;
+}
+
+/*
+ * PIO mode for buffer writing and reading
+ */
+static void bf5xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+ unsigned short val;
+
+ /*
+ * Data reads are requested by first writing to NFC_DATA_RD
+ * and then reading back from NFC_READ.
+ */
+ for (i = 0; i < len; i++) {
+ while (bfin_read_NFC_STAT() & WB_FULL)
+ cpu_relax();
+
+ /* Contents do not matter */
+ bfin_write_NFC_DATA_RD(0x0000);
+ SSYNC();
+
+ while ((bfin_read_NFC_IRQSTAT() & RD_RDY) != RD_RDY)
+ cpu_relax();
+
+ buf[i] = bfin_read_NFC_READ();
+
+ val = bfin_read_NFC_IRQSTAT();
+ val |= RD_RDY;
+ bfin_write_NFC_IRQSTAT(val);
+ SSYNC();
+ }
+}
+
+static uint8_t bf5xx_nand_read_byte(struct mtd_info *mtd)
+{
+ uint8_t val;
+
+ bf5xx_nand_read_buf(mtd, &val, 1);
+
+ return val;
+}
+
+static void bf5xx_nand_write_buf(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ while (bfin_read_NFC_STAT() & WB_FULL)
+ cpu_relax();
+
+ bfin_write_NFC_DATA_WR(buf[i]);
+ SSYNC();
+ }
+}
+
+static void bf5xx_nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+ u16 *p = (u16 *) buf;
+ len >>= 1;
+
+ /*
+ * Data reads are requested by first writing to NFC_DATA_RD
+ * and then reading back from NFC_READ.
+ */
+ bfin_write_NFC_DATA_RD(0x5555);
+
+ SSYNC();
+
+ for (i = 0; i < len; i++)
+ p[i] = bfin_read_NFC_READ();
+}
+
+static void bf5xx_nand_write_buf16(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ int i;
+ u16 *p = (u16 *) buf;
+ len >>= 1;
+
+ for (i = 0; i < len; i++)
+ bfin_write_NFC_DATA_WR(p[i]);
+
+ SSYNC();
+}
+
+/*
+ * DMA functions for buffer writing and reading
+ */
+static irqreturn_t bf5xx_nand_dma_irq(int irq, void *dev_id)
+{
+ struct bf5xx_nand_info *info = dev_id;
+
+ clear_dma_irqstat(CH_NFC);
+ disable_dma(CH_NFC);
+ complete(&info->dma_completion);
+
+ return IRQ_HANDLED;
+}
+
+static int bf5xx_nand_dma_rw(struct mtd_info *mtd,
+ uint8_t *buf, int is_read)
+{
+ struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
+ struct bf5xx_nand_platform *plat = info->platform;
+ unsigned short page_size = (plat->page_size ? 512 : 256);
+ unsigned short val;
+
+ dev_dbg(info->device, " mtd->%p, buf->%p, is_read %d\n",
+ mtd, buf, is_read);
+
+ /*
+ * Before starting a dma transfer, be sure to invalidate/flush
+ * the cache over the address range of your DMA buffer to
+ * prevent cache coherency problems. Otherwise very subtle bugs
+ * can be introduced to your driver.
+ */
+ if (is_read)
+ invalidate_dcache_range((unsigned int)buf,
+ (unsigned int)(buf + page_size));
+ else
+ flush_dcache_range((unsigned int)buf,
+ (unsigned int)(buf + page_size));
+
+ /*
+ * This register must be written before each page is
+ * transferred to generate the correct ECC register
+ * values.
+ */
+ bfin_write_NFC_RST(0x1);
+ SSYNC();
+
+ disable_dma(CH_NFC);
+ clear_dma_irqstat(CH_NFC);
+
+ /* setup DMA register with Blackfin DMA API */
+ set_dma_config(CH_NFC, 0x0);
+ set_dma_start_addr(CH_NFC, (unsigned long) buf);
+ set_dma_x_count(CH_NFC, (page_size >> 2));
+ set_dma_x_modify(CH_NFC, 4);
+
+ /* setup write or read operation */
+ val = DI_EN | WDSIZE_32;
+ if (is_read)
+ val |= WNR;
+ set_dma_config(CH_NFC, val);
+ enable_dma(CH_NFC);
+
+ /* Start PAGE read/write operation */
+ if (is_read)
+ bfin_write_NFC_PGCTL(0x1);
+ else
+ bfin_write_NFC_PGCTL(0x2);
+ wait_for_completion(&info->dma_completion);
+
+ return 0;
+}
+
+static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd,
+ uint8_t *buf, int len)
+{
+ struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
+ struct bf5xx_nand_platform *plat = info->platform;
+ unsigned short page_size = (plat->page_size ? 512 : 256);
+
+ dev_dbg(info->device, "mtd->%p, buf->%p, int %d\n", mtd, buf, len);
+
+ if (len == page_size)
+ bf5xx_nand_dma_rw(mtd, buf, 1);
+ else
+ bf5xx_nand_read_buf(mtd, buf, len);
+}
+
+static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
+ struct bf5xx_nand_platform *plat = info->platform;
+ unsigned short page_size = (plat->page_size ? 512 : 256);
+
+ dev_dbg(info->device, "mtd->%p, buf->%p, len %d\n", mtd, buf, len);
+
+ if (len == page_size)
+ bf5xx_nand_dma_rw(mtd, (uint8_t *)buf, 0);
+ else
+ bf5xx_nand_write_buf(mtd, buf, len);
+}
+
+/*
+ * System initialization functions
+ */
+
+static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
+{
+ int ret;
+ unsigned short val;
+
+ /* Do not use dma */
+ if (!hardware_ecc)
+ return 0;
+
+ init_completion(&info->dma_completion);
+
+ /* Setup DMAC1 channel mux for NFC which shared with SDH */
+ val = bfin_read_DMAC1_PERIMUX();
+ val &= 0xFFFE;
+ bfin_write_DMAC1_PERIMUX(val);
+ SSYNC();
+
+ /* Request NFC DMA channel */
+ ret = request_dma(CH_NFC, "BF5XX NFC driver");
+ if (ret < 0) {
+ dev_err(info->device, " unable to get DMA channel\n");
+ return ret;
+ }
+
+ set_dma_callback(CH_NFC, (void *) bf5xx_nand_dma_irq, (void *) info);
+
+ /* Turn off the DMA channel first */
+ disable_dma(CH_NFC);
+ return 0;
+}
+
+/*
+ * BF5XX NFC hardware initialization
+ * - pin mux setup
+ * - clear interrupt status
+ */
+static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info)
+{
+ int err = 0;
+ unsigned short val;
+ struct bf5xx_nand_platform *plat = info->platform;
+
+ /* setup NFC_CTL register */
+ dev_info(info->device,
+ "page_size=%d, data_width=%d, wr_dly=%d, rd_dly=%d\n",
+ (plat->page_size ? 512 : 256),
+ (plat->data_width ? 16 : 8),
+ plat->wr_dly, plat->rd_dly);
+
+ val = (plat->page_size << NFC_PG_SIZE_OFFSET) |
+ (plat->data_width << NFC_NWIDTH_OFFSET) |
+ (plat->rd_dly << NFC_RDDLY_OFFSET) |
+ (plat->rd_dly << NFC_WRDLY_OFFSET);
+ dev_dbg(info->device, "NFC_CTL is 0x%04x\n", val);
+
+ bfin_write_NFC_CTL(val);
+ SSYNC();
+
+ /* clear interrupt status */
+ bfin_write_NFC_IRQMASK(0x0);
+ SSYNC();
+ val = bfin_read_NFC_IRQSTAT();
+ bfin_write_NFC_IRQSTAT(val);
+ SSYNC();
+
+ if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
+ printk(KERN_ERR DRV_NAME
+ ": Requesting Peripherals failed\n");
+ return -EFAULT;
+ }
+
+ /* DMA initialization */
+ if (bf5xx_nand_dma_init(info))
+ err = -ENXIO;
+
+ return err;
+}
+
+/*
+ * Device management interface
+ */
+static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
+{
+ struct mtd_info *mtd = &info->mtd;
+
+#ifdef CONFIG_MTD_PARTITIONS
+ struct mtd_partition *parts = info->platform->partitions;
+ int nr = info->platform->nr_partitions;
+
+ return add_mtd_partitions(mtd, parts, nr);
+#else
+ return add_mtd_device(mtd);
+#endif
+}
+
+static int bf5xx_nand_remove(struct platform_device *pdev)
+{
+ struct bf5xx_nand_info *info = to_nand_info(pdev);
+ struct mtd_info *mtd = NULL;
+
+ platform_set_drvdata(pdev, NULL);
+
+ /* first thing we need to do is release all our mtds
+ * and their partitions, then go through freeing the
+ * resources used
+ */
+ mtd = &info->mtd;
+ if (mtd) {
+ nand_release(mtd);
+ kfree(mtd);
+ }
+
+ peripheral_free_list(bfin_nfc_pin_req);
+
+ /* free the common resources */
+ kfree(info);
+
+ return 0;
+}
+
+/*
+ * bf5xx_nand_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code checks to see if
+ * it can allocate all necessary resources then calls the
+ * nand layer to look for devices
+ */
+static int bf5xx_nand_probe(struct platform_device *pdev)
+{
+ struct bf5xx_nand_platform *plat = to_nand_plat(pdev);
+ struct bf5xx_nand_info *info = NULL;
+ struct nand_chip *chip = NULL;
+ struct mtd_info *mtd = NULL;
+ int err = 0;
+
+ dev_dbg(&pdev->dev, "(%p)\n", pdev);
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no platform specific information\n");
+ goto exit_error;
+ }
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (info == NULL) {
+ dev_err(&pdev->dev, "no memory for flash info\n");
+ err = -ENOMEM;
+ goto exit_error;
+ }
+
+ platform_set_drvdata(pdev, info);
+
+ spin_lock_init(&info->controller.lock);
+ init_waitqueue_head(&info->controller.wq);
+
+ info->device = &pdev->dev;
+ info->platform = plat;
+
+ /* initialise chip data struct */
+ chip = &info->chip;
+
+ if (plat->data_width)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ chip->options |= NAND_CACHEPRG | NAND_SKIP_BBTSCAN;
+
+ chip->read_buf = (plat->data_width) ?
+ bf5xx_nand_read_buf16 : bf5xx_nand_read_buf;
+ chip->write_buf = (plat->data_width) ?
+ bf5xx_nand_write_buf16 : bf5xx_nand_write_buf;
+
+ chip->read_byte = bf5xx_nand_read_byte;
+
+ chip->cmd_ctrl = bf5xx_nand_hwcontrol;
+ chip->dev_ready = bf5xx_nand_devready;
+
+ chip->priv = &info->mtd;
+ chip->controller = &info->controller;
+
+ chip->IO_ADDR_R = (void __iomem *) NFC_READ;
+ chip->IO_ADDR_W = (void __iomem *) NFC_DATA_WR;
+
+ chip->chip_delay = 0;
+
+ /* initialise mtd info data struct */
+ mtd = &info->mtd;
+ mtd->priv = chip;
+ mtd->owner = THIS_MODULE;
+
+ /* initialise the hardware */
+ err = bf5xx_nand_hw_init(info);
+ if (err != 0)
+ goto exit_error;
+
+ /* setup hardware ECC data struct */
+ if (hardware_ecc) {
+ if (plat->page_size == NFC_PG_SIZE_256) {
+ chip->ecc.bytes = 3;
+ chip->ecc.size = 256;
+ } else if (plat->page_size == NFC_PG_SIZE_512) {
+ chip->ecc.bytes = 6;
+ chip->ecc.size = 512;
+ }
+
+ chip->read_buf = bf5xx_nand_dma_read_buf;
+ chip->write_buf = bf5xx_nand_dma_write_buf;
+ chip->ecc.calculate = bf5xx_nand_calculate_ecc;
+ chip->ecc.correct = bf5xx_nand_correct_data;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.hwctl = bf5xx_nand_enable_hwecc;
+ } else {
+ chip->ecc.mode = NAND_ECC_SOFT;
+ }
+
+ /* scan hardware nand chip and setup mtd info data struct */
+ if (nand_scan(mtd, 1)) {
+ err = -ENXIO;
+ goto exit_error;
+ }
+
+ /* add NAND partition */
+ bf5xx_nand_add_partition(info);
+
+ dev_dbg(&pdev->dev, "initialised ok\n");
+ return 0;
+
+exit_error:
+ bf5xx_nand_remove(pdev);
+
+ if (err == 0)
+ err = -EINVAL;
+ return err;
+}
+
+/* PM Support */
+#ifdef CONFIG_PM
+
+static int bf5xx_nand_suspend(struct platform_device *dev, pm_message_t pm)
+{
+ struct bf5xx_nand_info *info = platform_get_drvdata(dev);
+
+ return 0;
+}
+
+static int bf5xx_nand_resume(struct platform_device *dev)
+{
+ struct bf5xx_nand_info *info = platform_get_drvdata(dev);
+
+ if (info)
+ bf5xx_nand_hw_init(info);
+
+ return 0;
+}
+
+#else
+#define bf5xx_nand_suspend NULL
+#define bf5xx_nand_resume NULL
+#endif
+
+/* driver device registration */
+static struct platform_driver bf5xx_nand_driver = {
+ .probe = bf5xx_nand_probe,
+ .remove = bf5xx_nand_remove,
+ .suspend = bf5xx_nand_suspend,
+ .resume = bf5xx_nand_resume,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init bf5xx_nand_init(void)
+{
+ printk(KERN_INFO "%s, Version %s (c) 2007 Analog Devices, Inc.\n",
+ DRV_DESC, DRV_VERSION);
+
+ return platform_driver_register(&bf5xx_nand_driver);
+}
+
+static void __exit bf5xx_nand_exit(void)
+{
+ platform_driver_unregister(&bf5xx_nand_driver);
+}
+
+module_init(bf5xx_nand_init);
+module_exit(bf5xx_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_DESCRIPTION(DRV_DESC);
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 6f32a35eb10..e2832d0b989 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -623,6 +623,11 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
uint32_t ctrl;
int err = 0;
+ /* Very old versions shared the same PCI ident for all three
+ functions on the chip. Verify the class too... */
+ if ((pdev->class >> 8) != PCI_CLASS_MEMORY_FLASH)
+ return -ENODEV;
+
err = pci_enable_device(pdev);
if (err)
return err;
@@ -816,21 +821,57 @@ static void __devexit cafe_nand_remove(struct pci_dev *pdev)
}
static struct pci_device_id cafe_nand_tbl[] = {
- { 0x11ab, 0x4100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MEMORY_FLASH << 8, 0xFFFF0 },
- { 0, }
+ { 0x11ab, 0x4100, PCI_ANY_ID, PCI_ANY_ID },
+ { }
};
MODULE_DEVICE_TABLE(pci, cafe_nand_tbl);
+static int cafe_nand_resume(struct pci_dev *pdev)
+{
+ uint32_t ctrl;
+ struct mtd_info *mtd = pci_get_drvdata(pdev);
+ struct cafe_priv *cafe = mtd->priv;
+
+ /* Start off by resetting the NAND controller completely */
+ cafe_writel(cafe, 1, NAND_RESET);
+ cafe_writel(cafe, 0, NAND_RESET);
+ cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
+
+ /* Restore timing configuration */
+ cafe_writel(cafe, timing[0], NAND_TIMING1);
+ cafe_writel(cafe, timing[1], NAND_TIMING2);
+ cafe_writel(cafe, timing[2], NAND_TIMING3);
+
+ /* Disable master reset, enable NAND clock */
+ ctrl = cafe_readl(cafe, GLOBAL_CTRL);
+ ctrl &= 0xffffeff0;
+ ctrl |= 0x00007000;
+ cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL);
+ cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL);
+ cafe_writel(cafe, 0, NAND_DMA_CTRL);
+ cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
+ cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
+
+ /* Set up DMA address */
+ cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
+ if (sizeof(cafe->dmaaddr) > 4)
+ /* Shift in two parts to shut the compiler up */
+ cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1);
+ else
+ cafe_writel(cafe, 0, NAND_DMA_ADDR1);
+
+ /* Enable NAND IRQ in global IRQ mask register */
+ cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
+ return 0;
+}
+
static struct pci_driver cafe_nand_pci_driver = {
.name = "CAFÉ NAND",
.id_table = cafe_nand_tbl,
.probe = cafe_nand_probe,
.remove = __devexit_p(cafe_nand_remove),
-#ifdef CONFIG_PMx
- .suspend = cafe_nand_suspend,
.resume = cafe_nand_resume,
-#endif
};
static int cafe_nand_init(void)
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index e96259f22cc..ab9f5c5db38 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -56,8 +56,6 @@ static unsigned long __initdata doc_locations[] = {
#endif /* CONFIG_MTD_DOCPROBE_HIGH */
#elif defined(__PPC__)
0xe4000000,
-#elif defined(CONFIG_MOMENCO_OCELOT_G)
- 0xff000000,
#else
#warning Unknown architecture for DiskOnChip. No default probe locations defined
#endif
diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c
index 7e9afc4c775..bed87290dec 100644
--- a/drivers/mtd/nand/excite_nandflash.c
+++ b/drivers/mtd/nand/excite_nandflash.c
@@ -27,7 +27,6 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/kernel.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 24ac6778b1a..b4e0e772389 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -7,7 +7,7 @@
* Basic support for AG-AND chips is provided.
*
* Additional technical information is available on
- * http://www.linux-mtd.infradead.org/tech/nand.html
+ * http://www.linux-mtd.infradead.org/doc/nand.html
*
* Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
* 2002-2006 Thomas Gleixner (tglx@linutronix.de)
@@ -2069,13 +2069,14 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
erase_exit:
ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
- /* Do call back function */
- if (!ret)
- mtd_erase_callback(instr);
/* Deselect and wake up anyone waiting on the device */
nand_release_device(mtd);
+ /* Do call back function */
+ if (!ret)
+ mtd_erase_callback(instr);
+
/*
* If BBT requires refresh and erase was successful, rewrite any
* selected bad block tables
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 2fc674a190c..a3e3ab0185d 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -141,6 +141,7 @@ struct nand_manufacturers nand_manuf_ids[] = {
{NAND_MFR_STMICRO, "ST Micro"},
{NAND_MFR_HYNIX, "Hynix"},
{NAND_MFR_MICRON, "Micron"},
+ {NAND_MFR_AMD, "AMD"},
{0x0, "Unknown"}
};
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 205df0f771f..a7574807dc4 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -1272,7 +1272,13 @@ static int prog_page(struct nandsim *ns, int num)
mypage = NS_GET_PAGE(ns);
if (mypage->byte == NULL) {
NS_DBG("prog_page: allocating page %d\n", ns->regs.row);
- mypage->byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
+ /*
+ * We allocate memory with GFP_NOFS because a flash FS may
+ * utilize this. If it is holding an FS lock, then gets here,
+ * then kmalloc runs writeback which goes to the FS again
+ * and deadlocks. This was seen in practice.
+ */
+ mypage->byte = kmalloc(ns->geom.pgszoob, GFP_NOFS);
if (mypage->byte == NULL) {
NS_ERR("prog_page: error allocating memory for page %d\n", ns->regs.row);
return -1;
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index fd7a8d5ba29..1c0e89f00e8 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -24,7 +24,11 @@
#include <linux/platform_device.h>
#include <asm/io.h>
+#ifdef CONFIG_40x
+#include <asm/ibm405.h>
+#else
#include <asm/ibm44x.h>
+#endif
struct ndfc_nand_mtd {
struct mtd_info mtd;
@@ -230,7 +234,11 @@ static int ndfc_nand_probe(struct platform_device *pdev)
struct ndfc_controller *ndfc = &ndfc_ctrl;
unsigned long long phys = settings->ndfc_erpn | res->start;
+#ifndef CONFIG_PHYS_64BIT
+ ndfc->ndfcbase = ioremap((phys_addr_t)phys, res->end - res->start + 1);
+#else
ndfc->ndfcbase = ioremap64(phys, res->end - res->start + 1);
+#endif
if (!ndfc->ndfcbase) {
printk(KERN_ERR "NDFC: ioremap failed\n");
return -EIO;
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 5fac4c421a2..b79a9cf2d16 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -60,8 +60,8 @@
#include <asm/io.h>
-#include <asm/arch/regs-nand.h>
-#include <asm/arch/nand.h>
+#include <asm/plat-s3c/regs-nand.h>
+#include <asm/plat-s3c/nand.h>
#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
static int hardware_ecc = 1;
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index c257d397d08..cb41cbca64f 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -40,4 +40,27 @@ config MTD_ONENAND_OTP
OTP block is fully-guaranteed to be a valid block.
+config MTD_ONENAND_2X_PROGRAM
+ bool "OneNAND 2X program support"
+ help
+ The 2X Program is an extension of Program Operation.
+ Since the device is equipped with two DataRAMs, and two-plane NAND
+ Flash memory array, these two component enables simultaneous program
+ of 4KiB. Plane1 has only even blocks such as block0, block2, block4
+ while Plane2 has only odd blocks such as block1, block3, block5.
+ So MTD regards it as 4KiB page size and 256KiB block size
+
+ Now the following chips support it. (KFXXX16Q2M)
+ Demux: KFG2G16Q2M, KFH4G16Q2M, KFW8G16Q2M,
+ Mux: KFM2G16Q2M, KFN4G16Q2M,
+
+ And more recent chips
+
+config MTD_ONENAND_SIM
+ tristate "OneNAND simulator support"
+ depends on MTD_PARTITIONS
+ help
+ The simulator may simulate various OneNAND flash chips for the
+ OneNAND MTD layer.
+
endif # MTD_ONENAND
diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
index 269cfe46734..4d2eacfd7e1 100644
--- a/drivers/mtd/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
@@ -8,4 +8,7 @@ obj-$(CONFIG_MTD_ONENAND) += onenand.o
# Board specific.
obj-$(CONFIG_MTD_ONENAND_GENERIC) += generic.o
+# Simulator
+obj-$(CONFIG_MTD_ONENAND_SIM) += onenand_sim.o
+
onenand-objs = onenand_base.o onenand_bbt.o
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 0537fac8de7..b2c40f67db8 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -206,6 +206,15 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
default:
block = (int) (addr >> this->erase_shift);
page = (int) (addr >> this->page_shift);
+
+ if (ONENAND_IS_2PLANE(this)) {
+ /* Make the even block number */
+ block &= ~1;
+ /* Is it the odd plane? */
+ if (addr & this->writesize)
+ block++;
+ page >>= 1;
+ }
page &= this->page_mask;
break;
}
@@ -216,8 +225,12 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
value = onenand_bufferram_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
- /* Switch to the next data buffer */
- ONENAND_SET_NEXT_BUFFERRAM(this);
+ if (ONENAND_IS_2PLANE(this))
+ /* It is always BufferRAM0 */
+ ONENAND_SET_BUFFERRAM0(this);
+ else
+ /* Switch to the next data buffer */
+ ONENAND_SET_NEXT_BUFFERRAM(this);
return 0;
}
@@ -247,6 +260,8 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
break;
default:
+ if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG)
+ cmd = ONENAND_CMD_2X_PROG;
dataram = ONENAND_CURRENT_BUFFERRAM(this);
break;
}
@@ -318,12 +333,14 @@ static int onenand_wait(struct mtd_info *mtd, int state)
if (interrupt & ONENAND_INT_READ) {
int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
if (ecc) {
- printk(KERN_ERR "onenand_wait: ECC error = 0x%04x\n", ecc);
if (ecc & ONENAND_ECC_2BIT_ALL) {
+ printk(KERN_ERR "onenand_wait: ECC error = 0x%04x\n", ecc);
mtd->ecc_stats.failed++;
return ecc;
- } else if (ecc & ONENAND_ECC_1BIT_ALL)
+ } else if (ecc & ONENAND_ECC_1BIT_ALL) {
+ printk(KERN_INFO "onenand_wait: correctable ECC error = 0x%04x\n", ecc);
mtd->ecc_stats.corrected++;
+ }
}
} else if (state == FL_READING) {
printk(KERN_ERR "onenand_wait: read timeout! ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
@@ -445,8 +462,9 @@ static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
struct onenand_chip *this = mtd->priv;
if (ONENAND_CURRENT_BUFFERRAM(this)) {
+ /* Note: the 'this->writesize' is a real page size */
if (area == ONENAND_DATARAM)
- return mtd->writesize;
+ return this->writesize;
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
@@ -572,6 +590,30 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area,
}
/**
+ * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
+ * @param mtd MTD data structure
+ * @param addr address to check
+ * @return blockpage address
+ *
+ * Get blockpage address at 2x program mode
+ */
+static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)
+{
+ struct onenand_chip *this = mtd->priv;
+ int blockpage, block, page;
+
+ /* Calculate the even block number */
+ block = (int) (addr >> this->erase_shift) & ~1;
+ /* Is it the odd plane? */
+ if (addr & this->writesize)
+ block++;
+ page = (int) (addr >> (this->page_shift + 1)) & this->page_mask;
+ blockpage = (block << 7) | page;
+
+ return blockpage;
+}
+
+/**
* onenand_check_bufferram - [GENERIC] Check BufferRAM information
* @param mtd MTD data structure
* @param addr address to check
@@ -585,7 +627,10 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
int blockpage, found = 0;
unsigned int i;
- blockpage = (int) (addr >> this->page_shift);
+ if (ONENAND_IS_2PLANE(this))
+ blockpage = onenand_get_2x_blockpage(mtd, addr);
+ else
+ blockpage = (int) (addr >> this->page_shift);
/* Is there valid data? */
i = ONENAND_CURRENT_BUFFERRAM(this);
@@ -625,7 +670,10 @@ static void onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
int blockpage;
unsigned int i;
- blockpage = (int) (addr >> this->page_shift);
+ if (ONENAND_IS_2PLANE(this))
+ blockpage = onenand_get_2x_blockpage(mtd, addr);
+ else
+ blockpage = (int) (addr >> this->page_shift);
/* Invalidate another BufferRAM */
i = ONENAND_NEXT_BUFFERRAM(this);
@@ -717,36 +765,86 @@ static void onenand_release_device(struct mtd_info *mtd)
}
/**
- * onenand_read - [MTD Interface] Read data from flash
+ * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
+ * @param mtd MTD device structure
+ * @param buf destination address
+ * @param column oob offset to read from
+ * @param thislen oob length to read
+ */
+static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int column,
+ int thislen)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct nand_oobfree *free;
+ int readcol = column;
+ int readend = column + thislen;
+ int lastgap = 0;
+ unsigned int i;
+ uint8_t *oob_buf = this->oob_buf;
+
+ free = this->ecclayout->oobfree;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+ if (readcol >= lastgap)
+ readcol += free->offset - lastgap;
+ if (readend >= lastgap)
+ readend += free->offset - lastgap;
+ lastgap = free->offset + free->length;
+ }
+ this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
+ free = this->ecclayout->oobfree;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+ int free_end = free->offset + free->length;
+ if (free->offset < readend && free_end > readcol) {
+ int st = max_t(int,free->offset,readcol);
+ int ed = min_t(int,free_end,readend);
+ int n = ed - st;
+ memcpy(buf, oob_buf + st, n);
+ buf += n;
+ } else if (column == 0)
+ break;
+ }
+ return 0;
+}
+
+/**
+ * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band
* @param mtd MTD device structure
* @param from offset to read from
- * @param len number of bytes to read
- * @param retlen pointer to variable to store the number of read bytes
- * @param buf the databuffer to put data
+ * @param ops: oob operation description structure
*
- * Read with ecc
-*/
-static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
+ * OneNAND read main and/or out-of-band data
+ */
+static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
struct mtd_ecc_stats stats;
- int read = 0, column;
- int thislen;
+ size_t len = ops->len;
+ size_t ooblen = ops->ooblen;
+ u_char *buf = ops->datbuf;
+ u_char *oobbuf = ops->oobbuf;
+ int read = 0, column, thislen;
+ int oobread = 0, oobcolumn, thisooblen, oobsize;
int ret = 0, boundary = 0;
+ int writesize = this->writesize;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ops_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+
+ if (ops->mode == MTD_OOB_AUTO)
+ oobsize = this->ecclayout->oobavail;
+ else
+ oobsize = mtd->oobsize;
+
+ oobcolumn = from & (mtd->oobsize - 1);
/* Do not allow reads past end of device */
if ((from + len) > mtd->size) {
- printk(KERN_ERR "onenand_read: Attempt read beyond end of device\n");
- *retlen = 0;
+ printk(KERN_ERR "onenand_read_ops_nolock: Attempt read beyond end of device\n");
+ ops->retlen = 0;
+ ops->oobretlen = 0;
return -EINVAL;
}
- /* Grab the lock and see if the device is available */
- onenand_get_device(mtd, FL_READING);
-
stats = mtd->ecc_stats;
/* Read-while-load method */
@@ -754,22 +852,22 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
/* Do first load to bufferRAM */
if (read < len) {
if (!onenand_check_bufferram(mtd, from)) {
- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
ret = this->wait(mtd, FL_READING);
onenand_update_bufferram(mtd, from, !ret);
}
}
- thislen = min_t(int, mtd->writesize, len - read);
- column = from & (mtd->writesize - 1);
- if (column + thislen > mtd->writesize)
- thislen = mtd->writesize - column;
+ thislen = min_t(int, writesize, len - read);
+ column = from & (writesize - 1);
+ if (column + thislen > writesize)
+ thislen = writesize - column;
while (!ret) {
/* If there is more to load then start next load */
from += thislen;
if (read + thislen < len) {
- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
/*
* Chip boundary handling in DDP
* Now we issued chip 1 read and pointed chip 1
@@ -785,6 +883,21 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
}
/* While load is going, read from last bufferRAM */
this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
+
+ /* Read oob area if needed */
+ if (oobbuf) {
+ thisooblen = oobsize - oobcolumn;
+ thisooblen = min_t(int, thisooblen, ooblen - oobread);
+
+ if (ops->mode == MTD_OOB_AUTO)
+ onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
+ else
+ this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
+ oobread += thisooblen;
+ oobbuf += thisooblen;
+ oobcolumn = 0;
+ }
+
/* See if we are done */
read += thislen;
if (read == len)
@@ -794,7 +907,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
ONENAND_SET_NEXT_BUFFERRAM(this);
buf += thislen;
- thislen = min_t(int, mtd->writesize, len - read);
+ thislen = min_t(int, writesize, len - read);
column = 0;
cond_resched();
/* Now wait for load */
@@ -802,15 +915,13 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
onenand_update_bufferram(mtd, from, !ret);
}
- /* Deselect and wake up anyone waiting on the device */
- onenand_release_device(mtd);
-
/*
* Return success, if no ECC failures, else -EBADMSG
* fs driver will take care of that, because
* retlen == desired len and result == -EBADMSG
*/
- *retlen = read;
+ ops->retlen = read;
+ ops->oobretlen = oobread;
if (mtd->ecc_stats.failed - stats.failed)
return -EBADMSG;
@@ -822,69 +933,29 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
}
/**
- * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
- * @param mtd MTD device structure
- * @param buf destination address
- * @param column oob offset to read from
- * @param thislen oob length to read
- */
-static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int column,
- int thislen)
-{
- struct onenand_chip *this = mtd->priv;
- struct nand_oobfree *free;
- int readcol = column;
- int readend = column + thislen;
- int lastgap = 0;
- unsigned int i;
- uint8_t *oob_buf = this->oob_buf;
-
- free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
- if (readcol >= lastgap)
- readcol += free->offset - lastgap;
- if (readend >= lastgap)
- readend += free->offset - lastgap;
- lastgap = free->offset + free->length;
- }
- this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
- free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
- int free_end = free->offset + free->length;
- if (free->offset < readend && free_end > readcol) {
- int st = max_t(int,free->offset,readcol);
- int ed = min_t(int,free_end,readend);
- int n = ed - st;
- memcpy(buf, oob_buf + st, n);
- buf += n;
- } else if (column == 0)
- break;
- }
- return 0;
-}
-
-/**
- * onenand_do_read_oob - [MTD Interface] OneNAND read out-of-band
+ * onenand_read_oob_nolock - [MTD Interface] OneNAND read out-of-band
* @param mtd MTD device structure
* @param from offset to read from
- * @param len number of bytes to read
- * @param retlen pointer to variable to store the number of read bytes
- * @param buf the databuffer to put data
- * @param mode operation mode
+ * @param ops: oob operation description structure
*
* OneNAND read out-of-band data from the spare area
*/
-static int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf, mtd_oob_mode_t mode)
+static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
int read = 0, thislen, column, oobsize;
+ size_t len = ops->ooblen;
+ mtd_oob_mode_t mode = ops->mode;
+ u_char *buf = ops->oobbuf;
int ret = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+ from += ops->ooboffs;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
/* Initialize return length value */
- *retlen = 0;
+ ops->oobretlen = 0;
if (mode == MTD_OOB_AUTO)
oobsize = this->ecclayout->oobavail;
@@ -894,7 +965,7 @@ static int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
column = from & (mtd->oobsize - 1);
if (unlikely(column >= oobsize)) {
- printk(KERN_ERR "onenand_read_oob: Attempted to start read outside oob\n");
+ printk(KERN_ERR "onenand_read_oob_nolock: Attempted to start read outside oob\n");
return -EINVAL;
}
@@ -902,13 +973,10 @@ static int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
if (unlikely(from >= mtd->size ||
column + len > ((mtd->size >> this->page_shift) -
(from >> this->page_shift)) * oobsize)) {
- printk(KERN_ERR "onenand_read_oob: Attempted to read beyond end of device\n");
+ printk(KERN_ERR "onenand_read_oob_nolock: Attempted to read beyond end of device\n");
return -EINVAL;
}
- /* Grab the lock and see if the device is available */
- onenand_get_device(mtd, FL_READING);
-
while (read < len) {
cond_resched();
@@ -928,7 +996,7 @@ static int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
if (ret) {
- printk(KERN_ERR "onenand_read_oob: read failed = 0x%x\n", ret);
+ printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret);
break;
}
@@ -947,22 +1015,52 @@ static int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
}
}
- /* Deselect and wake up anyone waiting on the device */
+ ops->oobretlen = read;
+ return ret;
+}
+
+/**
+ * onenand_read - [MTD Interface] Read data from flash
+ * @param mtd MTD device structure
+ * @param from offset to read from
+ * @param len number of bytes to read
+ * @param retlen pointer to variable to store the number of read bytes
+ * @param buf the databuffer to put data
+ *
+ * Read with ecc
+*/
+static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct mtd_oob_ops ops = {
+ .len = len,
+ .ooblen = 0,
+ .datbuf = buf,
+ .oobbuf = NULL,
+ };
+ int ret;
+
+ onenand_get_device(mtd, FL_READING);
+ ret = onenand_read_ops_nolock(mtd, from, &ops);
onenand_release_device(mtd);
- *retlen = read;
+ *retlen = ops.retlen;
return ret;
}
/**
- * onenand_read_oob - [MTD Interface] NAND write data and/or out-of-band
+ * onenand_read_oob - [MTD Interface] Read main and/or out-of-band
* @param mtd: MTD device structure
* @param from: offset to read from
* @param ops: oob operation description structure
+
+ * Read main and/or out-of-band
*/
static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
+ int ret;
+
switch (ops->mode) {
case MTD_OOB_PLACE:
case MTD_OOB_AUTO:
@@ -972,8 +1070,15 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
default:
return -EINVAL;
}
- return onenand_do_read_oob(mtd, from + ops->ooboffs, ops->ooblen,
- &ops->oobretlen, ops->oobbuf, ops->mode);
+
+ onenand_get_device(mtd, FL_READING);
+ if (ops->datbuf)
+ ret = onenand_read_ops_nolock(mtd, from, ops);
+ else
+ ret = onenand_read_oob_nolock(mtd, from, ops);
+ onenand_release_device(mtd);
+
+ return ret;
}
/**
@@ -1079,7 +1184,7 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
/* Read more? */
if (read < len) {
/* Update Page size */
- from += mtd->writesize;
+ from += this->writesize;
column = 0;
}
}
@@ -1097,7 +1202,6 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
* @param mtd MTD device structure
* @param buf the databuffer to verify
* @param to offset to read from
- *
*/
static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
{
@@ -1125,7 +1229,6 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
* @param buf the databuffer to verify
* @param addr offset to read from
* @param len number of bytes to read and compare
- *
*/
static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len)
{
@@ -1135,12 +1238,12 @@ static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr,
int thislen, column;
while (len != 0) {
- thislen = min_t(int, mtd->writesize, len);
- column = addr & (mtd->writesize - 1);
- if (column + thislen > mtd->writesize)
- thislen = mtd->writesize - column;
+ thislen = min_t(int, this->writesize, len);
+ column = addr & (this->writesize - 1);
+ if (column + thislen > this->writesize)
+ thislen = this->writesize - column;
- this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
+ this->command(mtd, ONENAND_CMD_READ, addr, this->writesize);
onenand_update_bufferram(mtd, addr, 0);
@@ -1171,50 +1274,101 @@ static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr,
#define NOTALIGNED(x) ((x & (this->subpagesize - 1)) != 0)
/**
- * onenand_write - [MTD Interface] write buffer to FLASH
+ * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
+ * @param mtd MTD device structure
+ * @param oob_buf oob buffer
+ * @param buf source address
+ * @param column oob offset to write to
+ * @param thislen oob length to write
+ */
+static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
+ const u_char *buf, int column, int thislen)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct nand_oobfree *free;
+ int writecol = column;
+ int writeend = column + thislen;
+ int lastgap = 0;
+ unsigned int i;
+
+ free = this->ecclayout->oobfree;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+ if (writecol >= lastgap)
+ writecol += free->offset - lastgap;
+ if (writeend >= lastgap)
+ writeend += free->offset - lastgap;
+ lastgap = free->offset + free->length;
+ }
+ free = this->ecclayout->oobfree;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+ int free_end = free->offset + free->length;
+ if (free->offset < writeend && free_end > writecol) {
+ int st = max_t(int,free->offset,writecol);
+ int ed = min_t(int,free_end,writeend);
+ int n = ed - st;
+ memcpy(oob_buf + st, buf, n);
+ buf += n;
+ } else if (column == 0)
+ break;
+ }
+ return 0;
+}
+
+/**
+ * onenand_write_ops_nolock - [OneNAND Interface] write main and/or out-of-band
* @param mtd MTD device structure
* @param to offset to write to
- * @param len number of bytes to write
- * @param retlen pointer to variable to store the number of written bytes
- * @param buf the data to write
+ * @param ops oob operation description structure
*
- * Write with ECC
+ * Write main and/or oob with ECC
*/
-static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
+static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
- int written = 0;
+ int written = 0, column, thislen, subpage;
+ int oobwritten = 0, oobcolumn, thisooblen, oobsize;
+ size_t len = ops->len;
+ size_t ooblen = ops->ooblen;
+ const u_char *buf = ops->datbuf;
+ const u_char *oob = ops->oobbuf;
+ u_char *oobbuf;
int ret = 0;
- int column, subpage;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_write: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ops_nolock: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
/* Initialize retlen, in case of early exit */
- *retlen = 0;
+ ops->retlen = 0;
+ ops->oobretlen = 0;
/* Do not allow writes past end of device */
if (unlikely((to + len) > mtd->size)) {
- printk(KERN_ERR "onenand_write: Attempt write to past end of device\n");
+ printk(KERN_ERR "onenand_write_ops_nolock: Attempt write to past end of device\n");
return -EINVAL;
}
/* Reject writes, which are not page aligned */
if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) {
- printk(KERN_ERR "onenand_write: Attempt to write not page aligned data\n");
+ printk(KERN_ERR "onenand_write_ops_nolock: Attempt to write not page aligned data\n");
return -EINVAL;
}
- column = to & (mtd->writesize - 1);
+ if (ops->mode == MTD_OOB_AUTO)
+ oobsize = this->ecclayout->oobavail;
+ else
+ oobsize = mtd->oobsize;
- /* Grab the lock and see if the device is available */
- onenand_get_device(mtd, FL_WRITING);
+ oobcolumn = to & (mtd->oobsize - 1);
+
+ column = to & (mtd->writesize - 1);
/* Loop until all data write */
while (written < len) {
- int thislen = min_t(int, mtd->writesize - column, len - written);
u_char *wbuf = (u_char *) buf;
+ thislen = min_t(int, mtd->writesize - column, len - written);
+ thisooblen = min_t(int, oobsize - oobcolumn, ooblen - oobwritten);
+
cond_resched();
this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
@@ -1228,7 +1382,25 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
}
this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
- this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
+
+ if (oob) {
+ oobbuf = this->oob_buf;
+
+ /* We send data to spare ram with oobsize
+ * to prevent byte access */
+ memset(oobbuf, 0xff, mtd->oobsize);
+ if (ops->mode == MTD_OOB_AUTO)
+ onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
+ else
+ memcpy(oobbuf + oobcolumn, oob, thisooblen);
+
+ oobwritten += thisooblen;
+ oob += thisooblen;
+ oobcolumn = 0;
+ } else
+ oobbuf = (u_char *) ffchars;
+
+ this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
@@ -1236,16 +1408,20 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
/* In partial page write we don't update bufferram */
onenand_update_bufferram(mtd, to, !ret && !subpage);
+ if (ONENAND_IS_2PLANE(this)) {
+ ONENAND_SET_BUFFERRAM1(this);
+ onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage);
+ }
if (ret) {
- printk(KERN_ERR "onenand_write: write filaed %d\n", ret);
+ printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
break;
}
/* Only check verify write turn on */
ret = onenand_verify(mtd, (u_char *) wbuf, to, thislen);
if (ret) {
- printk(KERN_ERR "onenand_write: verify failed %d\n", ret);
+ printk(KERN_ERR "onenand_write_ops_nolock: verify failed %d\n", ret);
break;
}
@@ -1262,54 +1438,14 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
- *retlen = written;
+ ops->retlen = written;
return ret;
}
-/**
- * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
- * @param mtd MTD device structure
- * @param oob_buf oob buffer
- * @param buf source address
- * @param column oob offset to write to
- * @param thislen oob length to write
- */
-static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
- const u_char *buf, int column, int thislen)
-{
- struct onenand_chip *this = mtd->priv;
- struct nand_oobfree *free;
- int writecol = column;
- int writeend = column + thislen;
- int lastgap = 0;
- unsigned int i;
-
- free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
- if (writecol >= lastgap)
- writecol += free->offset - lastgap;
- if (writeend >= lastgap)
- writeend += free->offset - lastgap;
- lastgap = free->offset + free->length;
- }
- free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
- int free_end = free->offset + free->length;
- if (free->offset < writeend && free_end > writecol) {
- int st = max_t(int,free->offset,writecol);
- int ed = min_t(int,free_end,writeend);
- int n = ed - st;
- memcpy(oob_buf + st, buf, n);
- buf += n;
- } else if (column == 0)
- break;
- }
- return 0;
-}
/**
- * onenand_do_write_oob - [Internal] OneNAND write out-of-band
+ * onenand_write_oob_nolock - [Internal] OneNAND write out-of-band
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
@@ -1319,18 +1455,23 @@ static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
*
* OneNAND write out-of-band
*/
-static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf, mtd_oob_mode_t mode)
+static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
int column, ret = 0, oobsize;
int written = 0;
u_char *oobbuf;
+ size_t len = ops->ooblen;
+ const u_char *buf = ops->oobbuf;
+ mtd_oob_mode_t mode = ops->mode;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+ to += ops->ooboffs;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob_nolock: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
/* Initialize retlen, in case of early exit */
- *retlen = 0;
+ ops->oobretlen = 0;
if (mode == MTD_OOB_AUTO)
oobsize = this->ecclayout->oobavail;
@@ -1340,13 +1481,13 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
column = to & (mtd->oobsize - 1);
if (unlikely(column >= oobsize)) {
- printk(KERN_ERR "onenand_write_oob: Attempted to start write outside oob\n");
+ printk(KERN_ERR "onenand_write_oob_nolock: Attempted to start write outside oob\n");
return -EINVAL;
}
/* For compatibility with NAND: Do not allow write past end of page */
if (unlikely(column + len > oobsize)) {
- printk(KERN_ERR "onenand_write_oob: "
+ printk(KERN_ERR "onenand_write_oob_nolock: "
"Attempt to write past end of page\n");
return -EINVAL;
}
@@ -1355,13 +1496,10 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
if (unlikely(to >= mtd->size ||
column + len > ((mtd->size >> this->page_shift) -
(to >> this->page_shift)) * oobsize)) {
- printk(KERN_ERR "onenand_write_oob: Attempted to write past end of device\n");
+ printk(KERN_ERR "onenand_write_oob_nolock: Attempted to write past end of device\n");
return -EINVAL;
}
- /* Grab the lock and see if the device is available */
- onenand_get_device(mtd, FL_WRITING);
-
oobbuf = this->oob_buf;
/* Loop until all data write */
@@ -1384,16 +1522,20 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
+ if (ONENAND_IS_2PLANE(this)) {
+ ONENAND_SET_BUFFERRAM1(this);
+ onenand_update_bufferram(mtd, to + this->writesize, 0);
+ }
ret = this->wait(mtd, FL_WRITING);
if (ret) {
- printk(KERN_ERR "onenand_write_oob: write failed %d\n", ret);
+ printk(KERN_ERR "onenand_write_oob_nolock: write failed %d\n", ret);
break;
}
ret = onenand_verify_oob(mtd, oobbuf, to);
if (ret) {
- printk(KERN_ERR "onenand_write_oob: verify failed %d\n", ret);
+ printk(KERN_ERR "onenand_write_oob_nolock: verify failed %d\n", ret);
break;
}
@@ -1406,11 +1548,37 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
column = 0;
}
- /* Deselect and wake up anyone waiting on the device */
- onenand_release_device(mtd);
+ ops->oobretlen = written;
+
+ return ret;
+}
+
+/**
+ * onenand_write - [MTD Interface] write buffer to FLASH
+ * @param mtd MTD device structure
+ * @param to offset to write to
+ * @param len number of bytes to write
+ * @param retlen pointer to variable to store the number of written bytes
+ * @param buf the data to write
+ *
+ * Write with ECC
+ */
+static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct mtd_oob_ops ops = {
+ .len = len,
+ .ooblen = 0,
+ .datbuf = (u_char *) buf,
+ .oobbuf = NULL,
+ };
+ int ret;
- *retlen = written;
+ onenand_get_device(mtd, FL_WRITING);
+ ret = onenand_write_ops_nolock(mtd, to, &ops);
+ onenand_release_device(mtd);
+ *retlen = ops.retlen;
return ret;
}
@@ -1423,6 +1591,8 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
+ int ret;
+
switch (ops->mode) {
case MTD_OOB_PLACE:
case MTD_OOB_AUTO:
@@ -1432,21 +1602,27 @@ static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
default:
return -EINVAL;
}
- return onenand_do_write_oob(mtd, to + ops->ooboffs, ops->ooblen,
- &ops->oobretlen, ops->oobbuf, ops->mode);
+
+ onenand_get_device(mtd, FL_WRITING);
+ if (ops->datbuf)
+ ret = onenand_write_ops_nolock(mtd, to, ops);
+ else
+ ret = onenand_write_oob_nolock(mtd, to, ops);
+ onenand_release_device(mtd);
+
+ return ret;
}
/**
- * onenand_block_checkbad - [GENERIC] Check if a block is marked bad
+ * onenand_block_isbad_nolock - [GENERIC] Check if a block is marked bad
* @param mtd MTD device structure
* @param ofs offset from device start
- * @param getchip 0, if the chip is already selected
* @param allowbbt 1, if its allowed to access the bbt area
*
* Check, if the block is bad. Either by reading the bad block table or
* calling of the scan function.
*/
-static int onenand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
+static int onenand_block_isbad_nolock(struct mtd_info *mtd, loff_t ofs, int allowbbt)
{
struct onenand_chip *this = mtd->priv;
struct bbm_info *bbm = this->bbm;
@@ -1507,7 +1683,7 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
cond_resched();
/* Check if we have a bad block, we do not erase bad blocks */
- if (onenand_block_checkbad(mtd, addr, 0, 0)) {
+ if (onenand_block_isbad_nolock(mtd, addr, 0)) {
printk (KERN_WARNING "onenand_erase: attempt to erase a bad block at addr 0x%08x\n", (unsigned int) addr);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
@@ -1571,11 +1747,16 @@ static void onenand_sync(struct mtd_info *mtd)
*/
static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
{
+ int ret;
+
/* Check for invalid offset */
if (ofs > mtd->size)
return -EINVAL;
- return onenand_block_checkbad(mtd, ofs, 1, 0);
+ onenand_get_device(mtd, FL_READING);
+ ret = onenand_block_isbad_nolock(mtd, ofs, 0);
+ onenand_release_device(mtd);
+ return ret;
}
/**
@@ -1591,7 +1772,12 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
struct onenand_chip *this = mtd->priv;
struct bbm_info *bbm = this->bbm;
u_char buf[2] = {0, 0};
- size_t retlen;
+ struct mtd_oob_ops ops = {
+ .mode = MTD_OOB_PLACE,
+ .ooblen = 2,
+ .oobbuf = buf,
+ .ooboffs = 0,
+ };
int block;
/* Get block number */
@@ -1601,7 +1787,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
/* We write two bytes, so we dont have to mess with 16 bit access */
ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
- return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf, MTD_OOB_PLACE);
+ return onenand_write_oob_nolock(mtd, ofs, &ops);
}
/**
@@ -1624,7 +1810,10 @@ static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
return ret;
}
- return this->block_markbad(mtd, ofs);
+ onenand_get_device(mtd, FL_WRITING);
+ ret = this->block_markbad(mtd, ofs);
+ onenand_release_device(mtd);
+ return ret;
}
/**
@@ -1823,13 +2012,19 @@ static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct onenand_chip *this = mtd->priv;
+ struct mtd_oob_ops ops = {
+ .len = len,
+ .ooblen = 0,
+ .datbuf = buf,
+ .oobbuf = NULL,
+ };
int ret;
/* Enter OTP access mode */
this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
this->wait(mtd, FL_OTPING);
- ret = mtd->read(mtd, from, len, retlen, buf);
+ ret = onenand_read_ops_nolock(mtd, from, &ops);
/* Exit OTP access mode */
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
@@ -1841,19 +2036,20 @@ static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
/**
* do_otp_write - [DEFAULT] Write OTP block area
* @param mtd MTD device structure
- * @param from The offset to write
+ * @param to The offset to write
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of write bytes
* @param buf the databuffer to put/get data
*
* Write OTP block area.
*/
-static int do_otp_write(struct mtd_info *mtd, loff_t from, size_t len,
+static int do_otp_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, u_char *buf)
{
struct onenand_chip *this = mtd->priv;
unsigned char *pbuf = buf;
int ret;
+ struct mtd_oob_ops ops;
/* Force buffer page aligned */
if (len < mtd->writesize) {
@@ -1867,7 +2063,12 @@ static int do_otp_write(struct mtd_info *mtd, loff_t from, size_t len,
this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
this->wait(mtd, FL_OTPING);
- ret = mtd->write(mtd, from, len, retlen, pbuf);
+ ops.len = len;
+ ops.ooblen = 0;
+ ops.datbuf = pbuf;
+ ops.oobbuf = NULL;
+ ret = onenand_write_ops_nolock(mtd, to, &ops);
+ *retlen = ops.retlen;
/* Exit OTP access mode */
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
@@ -1890,13 +2091,21 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct onenand_chip *this = mtd->priv;
+ struct mtd_oob_ops ops = {
+ .mode = MTD_OOB_PLACE,
+ .ooblen = len,
+ .oobbuf = buf,
+ .ooboffs = 0,
+ };
int ret;
/* Enter OTP access mode */
this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
this->wait(mtd, FL_OTPING);
- ret = onenand_do_write_oob(mtd, from, len, retlen, buf, MTD_OOB_PLACE);
+ ret = onenand_write_oob_nolock(mtd, from, &ops);
+
+ *retlen = ops.oobretlen;
/* Exit OTP access mode */
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
@@ -1943,13 +2152,16 @@ static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
if (((mtd->writesize * otp_pages) - (from + len)) < 0)
return 0;
+ onenand_get_device(mtd, FL_OTPING);
while (len > 0 && otp_pages > 0) {
if (!action) { /* OTP Info functions */
struct otp_info *otpinfo;
len -= sizeof(struct otp_info);
- if (len <= 0)
- return -ENOSPC;
+ if (len <= 0) {
+ ret = -ENOSPC;
+ break;
+ }
otpinfo = (struct otp_info *) buf;
otpinfo->start = from;
@@ -1969,13 +2181,14 @@ static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
len -= size;
*retlen += size;
- if (ret < 0)
- return ret;
+ if (ret)
+ break;
}
otp_pages--;
}
+ onenand_release_device(mtd);
- return 0;
+ return ret;
}
/**
@@ -2107,6 +2320,7 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
*
* Check and set OneNAND features
* - lock scheme
+ * - two plane
*/
static void onenand_check_features(struct mtd_info *mtd)
{
@@ -2118,19 +2332,35 @@ static void onenand_check_features(struct mtd_info *mtd)
process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
/* Lock scheme */
- if (density >= ONENAND_DEVICE_DENSITY_1Gb) {
+ switch (density) {
+ case ONENAND_DEVICE_DENSITY_4Gb:
+ this->options |= ONENAND_HAS_2PLANE;
+
+ case ONENAND_DEVICE_DENSITY_2Gb:
+ /* 2Gb DDP don't have 2 plane */
+ if (!ONENAND_IS_DDP(this))
+ this->options |= ONENAND_HAS_2PLANE;
+ this->options |= ONENAND_HAS_UNLOCK_ALL;
+
+ case ONENAND_DEVICE_DENSITY_1Gb:
/* A-Die has all block unlock */
- if (process) {
- printk(KERN_DEBUG "Chip support all block unlock\n");
+ if (process)
this->options |= ONENAND_HAS_UNLOCK_ALL;
- }
- } else {
- /* Some OneNAND has continues lock scheme */
- if (!process) {
- printk(KERN_DEBUG "Lock scheme is Continues Lock\n");
+ break;
+
+ default:
+ /* Some OneNAND has continuous lock scheme */
+ if (!process)
this->options |= ONENAND_HAS_CONT_LOCK;
- }
+ break;
}
+
+ if (this->options & ONENAND_HAS_CONT_LOCK)
+ printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
+ if (this->options & ONENAND_HAS_UNLOCK_ALL)
+ printk(KERN_DEBUG "Chip support all block unlock\n");
+ if (this->options & ONENAND_HAS_2PLANE)
+ printk(KERN_DEBUG "Chip has 2 plane\n");
}
/**
@@ -2154,7 +2384,7 @@ static void onenand_print_device_info(int device, int version)
(16 << density),
vcc ? "2.65/3.3" : "1.8",
device);
- printk(KERN_DEBUG "OneNAND version = 0x%04x\n", version);
+ printk(KERN_INFO "OneNAND version = 0x%04x\n", version);
}
static const struct onenand_manufacturers onenand_manuf_ids[] = {
@@ -2257,6 +2487,8 @@ static int onenand_probe(struct mtd_info *mtd)
this->erase_shift = ffs(mtd->erasesize) - 1;
this->page_shift = ffs(mtd->writesize) - 1;
this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
+ /* It's real page size */
+ this->writesize = mtd->writesize;
/* REVIST: Multichip handling */
@@ -2265,6 +2497,17 @@ static int onenand_probe(struct mtd_info *mtd)
/* Check OneNAND features */
onenand_check_features(mtd);
+ /*
+ * We emulate the 4KiB page and 256KiB erase block size
+ * But oobsize is still 64 bytes.
+ * It is only valid if you turn on 2X program support,
+ * Otherwise it will be ignored by compiler.
+ */
+ if (ONENAND_IS_2PLANE(this)) {
+ mtd->writesize <<= 1;
+ mtd->erasesize <<= 1;
+ }
+
return 0;
}
diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c
new file mode 100644
index 00000000000..0d89ad5776f
--- /dev/null
+++ b/drivers/mtd/onenand/onenand_sim.c
@@ -0,0 +1,495 @@
+/*
+ * linux/drivers/mtd/onenand/onenand_sim.c
+ *
+ * The OneNAND simulator
+ *
+ * Copyright © 2005-2007 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
+
+#include <linux/io.h>
+
+#ifndef CONFIG_ONENAND_SIM_MANUFACTURER
+#define CONFIG_ONENAND_SIM_MANUFACTURER 0xec
+#endif
+#ifndef CONFIG_ONENAND_SIM_DEVICE_ID
+#define CONFIG_ONENAND_SIM_DEVICE_ID 0x04
+#endif
+#ifndef CONFIG_ONENAND_SIM_VERSION_ID
+#define CONFIG_ONENAND_SIM_VERSION_ID 0x1e
+#endif
+
+static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER;
+static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID;
+static int version_id = CONFIG_ONENAND_SIM_VERSION_ID;
+
+struct onenand_flash {
+ void __iomem *base;
+ void __iomem *data;
+};
+
+#define ONENAND_CORE(flash) (flash->data)
+#define ONENAND_CORE_SPARE(flash, this, offset) \
+ ((flash->data) + (this->chipsize) + (offset >> 5))
+
+#define ONENAND_MAIN_AREA(this, offset) \
+ (this->base + ONENAND_DATARAM + offset)
+
+#define ONENAND_SPARE_AREA(this, offset) \
+ (this->base + ONENAND_SPARERAM + offset)
+
+#define ONENAND_GET_WP_STATUS(this) \
+ (readw(this->base + ONENAND_REG_WP_STATUS))
+
+#define ONENAND_SET_WP_STATUS(v, this) \
+ (writew(v, this->base + ONENAND_REG_WP_STATUS))
+
+/* It has all 0xff chars */
+#define MAX_ONENAND_PAGESIZE (2048 + 64)
+static unsigned char *ffchars;
+
+static struct mtd_partition os_partitions[] = {
+ {
+ .name = "OneNAND simulator partition",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+/*
+ * OneNAND simulator mtd
+ */
+struct onenand_info {
+ struct mtd_info mtd;
+ struct mtd_partition *parts;
+ struct onenand_chip onenand;
+ struct onenand_flash flash;
+};
+
+static struct onenand_info *info;
+
+#define DPRINTK(format, args...) \
+do { \
+ printk(KERN_DEBUG "%s[%d]: " format "\n", __func__, \
+ __LINE__, ##args); \
+} while (0)
+
+/**
+ * onenand_lock_handle - Handle Lock scheme
+ * @param this OneNAND device structure
+ * @param cmd The command to be sent
+ *
+ * Send lock command to OneNAND device.
+ * The lock scheme is depends on chip type.
+ */
+static void onenand_lock_handle(struct onenand_chip *this, int cmd)
+{
+ int block_lock_scheme;
+ int status;
+
+ status = ONENAND_GET_WP_STATUS(this);
+ block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK);
+
+ switch (cmd) {
+ case ONENAND_CMD_UNLOCK:
+ if (block_lock_scheme)
+ ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
+ else
+ ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this);
+ break;
+
+ case ONENAND_CMD_LOCK:
+ if (block_lock_scheme)
+ ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this);
+ else
+ ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this);
+ break;
+
+ case ONENAND_CMD_LOCK_TIGHT:
+ if (block_lock_scheme)
+ ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this);
+ else
+ ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * onenand_bootram_handle - Handle BootRAM area
+ * @param this OneNAND device structure
+ * @param cmd The command to be sent
+ *
+ * Emulate BootRAM area. It is possible to do basic operation using BootRAM.
+ */
+static void onenand_bootram_handle(struct onenand_chip *this, int cmd)
+{
+ switch (cmd) {
+ case ONENAND_CMD_READID:
+ writew(manuf_id, this->base);
+ writew(device_id, this->base + 2);
+ writew(version_id, this->base + 4);
+ break;
+
+ default:
+ /* REVIST: Handle other commands */
+ break;
+ }
+}
+
+/**
+ * onenand_update_interrupt - Set interrupt register
+ * @param this OneNAND device structure
+ * @param cmd The command to be sent
+ *
+ * Update interrupt register. The status is depends on command.
+ */
+static void onenand_update_interrupt(struct onenand_chip *this, int cmd)
+{
+ int interrupt = ONENAND_INT_MASTER;
+
+ switch (cmd) {
+ case ONENAND_CMD_READ:
+ case ONENAND_CMD_READOOB:
+ interrupt |= ONENAND_INT_READ;
+ break;
+
+ case ONENAND_CMD_PROG:
+ case ONENAND_CMD_PROGOOB:
+ interrupt |= ONENAND_INT_WRITE;
+ break;
+
+ case ONENAND_CMD_ERASE:
+ interrupt |= ONENAND_INT_ERASE;
+ break;
+
+ case ONENAND_CMD_RESET:
+ interrupt |= ONENAND_INT_RESET;
+ break;
+
+ default:
+ break;
+ }
+
+ writew(interrupt, this->base + ONENAND_REG_INTERRUPT);
+}
+
+/**
+ * onenand_check_overwrite - Check over-write if happend
+ * @param dest The destination pointer
+ * @param src The source pointer
+ * @param count The length to be check
+ * @return 0 on same, otherwise 1
+ *
+ * Compare the source with destination
+ */
+static int onenand_check_overwrite(void *dest, void *src, size_t count)
+{
+ unsigned int *s = (unsigned int *) src;
+ unsigned int *d = (unsigned int *) dest;
+ int i;
+
+ count >>= 2;
+ for (i = 0; i < count; i++)
+ if ((*s++ ^ *d++) != 0)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * onenand_data_handle - Handle OneNAND Core and DataRAM
+ * @param this OneNAND device structure
+ * @param cmd The command to be sent
+ * @param dataram Which dataram used
+ * @param offset The offset to OneNAND Core
+ *
+ * Copy data from OneNAND Core to DataRAM (read)
+ * Copy data from DataRAM to OneNAND Core (write)
+ * Erase the OneNAND Core (erase)
+ */
+static void onenand_data_handle(struct onenand_chip *this, int cmd,
+ int dataram, unsigned int offset)
+{
+ struct mtd_info *mtd = &info->mtd;
+ struct onenand_flash *flash = this->priv;
+ int main_offset, spare_offset;
+ void __iomem *src;
+ void __iomem *dest;
+ unsigned int i;
+
+ if (dataram) {
+ main_offset = mtd->writesize;
+ spare_offset = mtd->oobsize;
+ } else {
+ main_offset = 0;
+ spare_offset = 0;
+ }
+
+ switch (cmd) {
+ case ONENAND_CMD_READ:
+ src = ONENAND_CORE(flash) + offset;
+ dest = ONENAND_MAIN_AREA(this, main_offset);
+ memcpy(dest, src, mtd->writesize);
+ /* Fall through */
+
+ case ONENAND_CMD_READOOB:
+ src = ONENAND_CORE_SPARE(flash, this, offset);
+ dest = ONENAND_SPARE_AREA(this, spare_offset);
+ memcpy(dest, src, mtd->oobsize);
+ break;
+
+ case ONENAND_CMD_PROG:
+ src = ONENAND_MAIN_AREA(this, main_offset);
+ dest = ONENAND_CORE(flash) + offset;
+ /* To handle partial write */
+ for (i = 0; i < (1 << mtd->subpage_sft); i++) {
+ int off = i * this->subpagesize;
+ if (!memcmp(src + off, ffchars, this->subpagesize))
+ continue;
+ if (memcmp(dest + off, ffchars, this->subpagesize) &&
+ onenand_check_overwrite(dest + off, src + off, this->subpagesize))
+ printk(KERN_ERR "over-write happend at 0x%08x\n", offset);
+ memcpy(dest + off, src + off, this->subpagesize);
+ }
+ /* Fall through */
+
+ case ONENAND_CMD_PROGOOB:
+ src = ONENAND_SPARE_AREA(this, spare_offset);
+ /* Check all data is 0xff chars */
+ if (!memcmp(src, ffchars, mtd->oobsize))
+ break;
+
+ dest = ONENAND_CORE_SPARE(flash, this, offset);
+ if (memcmp(dest, ffchars, mtd->oobsize) &&
+ onenand_check_overwrite(dest, src, mtd->oobsize))
+ printk(KERN_ERR "OOB: over-write happend at 0x%08x\n",
+ offset);
+ memcpy(dest, src, mtd->oobsize);
+ break;
+
+ case ONENAND_CMD_ERASE:
+ memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize);
+ memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
+ (mtd->erasesize >> 5));
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * onenand_command_handle - Handle command
+ * @param this OneNAND device structure
+ * @param cmd The command to be sent
+ *
+ * Emulate OneNAND command.
+ */
+static void onenand_command_handle(struct onenand_chip *this, int cmd)
+{
+ unsigned long offset = 0;
+ int block = -1, page = -1, bufferram = -1;
+ int dataram = 0;
+
+ switch (cmd) {
+ case ONENAND_CMD_UNLOCK:
+ case ONENAND_CMD_LOCK:
+ case ONENAND_CMD_LOCK_TIGHT:
+ case ONENAND_CMD_UNLOCK_ALL:
+ onenand_lock_handle(this, cmd);
+ break;
+
+ case ONENAND_CMD_BUFFERRAM:
+ /* Do nothing */
+ return;
+
+ default:
+ block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1);
+ if (block & (1 << ONENAND_DDP_SHIFT)) {
+ block &= ~(1 << ONENAND_DDP_SHIFT);
+ /* The half of chip block */
+ block += this->chipsize >> (this->erase_shift + 1);
+ }
+ if (cmd == ONENAND_CMD_ERASE)
+ break;
+
+ page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8);
+ page = (page >> ONENAND_FPA_SHIFT);
+ bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER);
+ bufferram >>= ONENAND_BSA_SHIFT;
+ bufferram &= ONENAND_BSA_DATARAM1;
+ dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0;
+ break;
+ }
+
+ if (block != -1)
+ offset += block << this->erase_shift;
+
+ if (page != -1)
+ offset += page << this->page_shift;
+
+ onenand_data_handle(this, cmd, dataram, offset);
+
+ onenand_update_interrupt(this, cmd);
+}
+
+/**
+ * onenand_writew - [OneNAND Interface] Emulate write operation
+ * @param value value to write
+ * @param addr address to write
+ *
+ * Write OneNAND register with value
+ */
+static void onenand_writew(unsigned short value, void __iomem * addr)
+{
+ struct onenand_chip *this = info->mtd.priv;
+
+ /* BootRAM handling */
+ if (addr < this->base + ONENAND_DATARAM) {
+ onenand_bootram_handle(this, value);
+ return;
+ }
+ /* Command handling */
+ if (addr == this->base + ONENAND_REG_COMMAND)
+ onenand_command_handle(this, value);
+
+ writew(value, addr);
+}
+
+/**
+ * flash_init - Initialize OneNAND simulator
+ * @param flash OneNAND simulaotr data strucutres
+ *
+ * Initialize OneNAND simulator.
+ */
+static int __init flash_init(struct onenand_flash *flash)
+{
+ int density, size;
+ int buffer_size;
+
+ flash->base = kzalloc(131072, GFP_KERNEL);
+ if (!flash->base) {
+ printk(KERN_ERR "Unable to allocate base address.\n");
+ return -ENOMEM;
+ }
+
+ density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+ size = ((16 << 20) << density);
+
+ ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
+ if (!ONENAND_CORE(flash)) {
+ printk(KERN_ERR "Unable to allocate nand core address.\n");
+ kfree(flash->base);
+ return -ENOMEM;
+ }
+
+ memset(ONENAND_CORE(flash), 0xff, size + (size >> 5));
+
+ /* Setup registers */
+ writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
+ writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
+ writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
+
+ if (density < 2)
+ buffer_size = 0x0400; /* 1KiB page */
+ else
+ buffer_size = 0x0800; /* 2KiB page */
+ writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE);
+
+ return 0;
+}
+
+/**
+ * flash_exit - Clean up OneNAND simulator
+ * @param flash OneNAND simulaotr data strucutres
+ *
+ * Clean up OneNAND simulator.
+ */
+static void flash_exit(struct onenand_flash *flash)
+{
+ vfree(ONENAND_CORE(flash));
+ kfree(flash->base);
+ kfree(flash);
+}
+
+static int __init onenand_sim_init(void)
+{
+ /* Allocate all 0xff chars pointer */
+ ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL);
+ if (!ffchars) {
+ printk(KERN_ERR "Unable to allocate ff chars.\n");
+ return -ENOMEM;
+ }
+ memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE);
+
+ /* Allocate OneNAND simulator mtd pointer */
+ info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
+ if (!info) {
+ printk(KERN_ERR "Unable to allocate core structures.\n");
+ kfree(ffchars);
+ return -ENOMEM;
+ }
+
+ /* Override write_word function */
+ info->onenand.write_word = onenand_writew;
+
+ if (flash_init(&info->flash)) {
+ printk(KERN_ERR "Unable to allocat flash.\n");
+ kfree(ffchars);
+ kfree(info);
+ return -ENOMEM;
+ }
+
+ info->parts = os_partitions;
+
+ info->onenand.base = info->flash.base;
+ info->onenand.priv = &info->flash;
+
+ info->mtd.name = "OneNAND simulator";
+ info->mtd.priv = &info->onenand;
+ info->mtd.owner = THIS_MODULE;
+
+ if (onenand_scan(&info->mtd, 1)) {
+ flash_exit(&info->flash);
+ kfree(ffchars);
+ kfree(info);
+ return -ENXIO;
+ }
+
+ add_mtd_partitions(&info->mtd, info->parts, ARRAY_SIZE(os_partitions));
+
+ return 0;
+}
+
+static void __exit onenand_sim_exit(void)
+{
+ struct onenand_chip *this = info->mtd.priv;
+ struct onenand_flash *flash = this->priv;
+
+ onenand_release(&info->mtd);
+ flash_exit(flash);
+ kfree(ffchars);
+ kfree(info);
+}
+
+module_init(onenand_sim_init);
+module_exit(onenand_sim_exit);
+
+MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
+MODULE_DESCRIPTION("The OneNAND flash simulator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c
index 006c03aacb5..823fba4e6d2 100644
--- a/drivers/mtd/rfd_ftl.c
+++ b/drivers/mtd/rfd_ftl.c
@@ -779,10 +779,8 @@ static void rfd_ftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
else {
if (!mtd->erasesize) {
printk(KERN_WARNING PREFIX "please provide block_size");
- kfree(part);
- return;
- }
- else
+ goto out;
+ } else
part->block_size = mtd->erasesize;
}
@@ -804,7 +802,7 @@ static void rfd_ftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
if (!add_mtd_blktrans_dev((void*)part))
return;
}
-
+out:
kfree(part);
}
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 94ee5493441..29c41eeb09f 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -1314,11 +1314,10 @@ static int paranoid_check_si(const struct ubi_device *ubi,
* Make sure that all the physical eraseblocks are in one of the lists
* or trees.
*/
- buf = kmalloc(ubi->peb_count, GFP_KERNEL);
+ buf = kzalloc(ubi->peb_count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
- memset(buf, 1, ubi->peb_count);
for (pnum = 0; pnum < ubi->peb_count; pnum++) {
err = ubi_io_is_bad(ubi, pnum);
if (err < 0) {
@@ -1326,28 +1325,28 @@ static int paranoid_check_si(const struct ubi_device *ubi,
return err;
}
else if (err)
- buf[pnum] = 0;
+ buf[pnum] = 1;
}
ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb)
ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb)
- buf[seb->pnum] = 0;
+ buf[seb->pnum] = 1;
list_for_each_entry(seb, &si->free, u.list)
- buf[seb->pnum] = 0;
+ buf[seb->pnum] = 1;
list_for_each_entry(seb, &si->corr, u.list)
- buf[seb->pnum] = 0;
+ buf[seb->pnum] = 1;
list_for_each_entry(seb, &si->erase, u.list)
- buf[seb->pnum] = 0;
+ buf[seb->pnum] = 1;
list_for_each_entry(seb, &si->alien, u.list)
- buf[seb->pnum] = 0;
+ buf[seb->pnum] = 1;
err = 0;
for (pnum = 0; pnum < ubi->peb_count; pnum++)
- if (buf[pnum]) {
+ if (!buf[pnum]) {
ubi_err("PEB %d is not referred", pnum);
err = 1;
}
diff --git a/fs/Kconfig b/fs/Kconfig
index f9eed6d7906..bb02b39380a 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1225,6 +1225,14 @@ config JFFS2_FS_WRITEBUFFER
- NOR flash with transparent ECC
- DataFlash
+config JFFS2_FS_WBUF_VERIFY
+ bool "Verify JFFS2 write-buffer reads"
+ depends on JFFS2_FS_WRITEBUFFER
+ default n
+ help
+ This causes JFFS2 to read back every page written through the
+ write-buffer, and check for errors.
+
config JFFS2_SUMMARY
bool "JFFS2 summary support (EXPERIMENTAL)"
depends on JFFS2_FS && EXPERIMENTAL
@@ -1295,52 +1303,71 @@ config JFFS2_ZLIB
select ZLIB_DEFLATE
depends on JFFS2_FS
default y
- help
- Zlib is designed to be a free, general-purpose, legally unencumbered,
- lossless data-compression library for use on virtually any computer
- hardware and operating system. See <http://www.gzip.org/zlib/> for
- further information.
+ help
+ Zlib is designed to be a free, general-purpose, legally unencumbered,
+ lossless data-compression library for use on virtually any computer
+ hardware and operating system. See <http://www.gzip.org/zlib/> for
+ further information.
- Say 'Y' if unsure.
+ Say 'Y' if unsure.
+
+config JFFS2_LZO
+ bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
+ select LZO_COMPRESS
+ select LZO_DECOMPRESS
+ depends on JFFS2_FS
+ default n
+ help
+ minilzo-based compression. Generally works better than Zlib.
+
+ This feature was added in July, 2007. Say 'N' if you need
+ compatibility with older bootloaders or kernels.
config JFFS2_RTIME
bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
depends on JFFS2_FS
default y
- help
- Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
+ help
+ Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
config JFFS2_RUBIN
bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
depends on JFFS2_FS
default n
- help
- RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
+ help
+ RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
choice
- prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
- default JFFS2_CMODE_PRIORITY
- depends on JFFS2_FS
- help
- You can set here the default compression mode of JFFS2 from
- the available compression modes. Don't touch if unsure.
+ prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
+ default JFFS2_CMODE_PRIORITY
+ depends on JFFS2_FS
+ help
+ You can set here the default compression mode of JFFS2 from
+ the available compression modes. Don't touch if unsure.
config JFFS2_CMODE_NONE
- bool "no compression"
- help
- Uses no compression.
+ bool "no compression"
+ help
+ Uses no compression.
config JFFS2_CMODE_PRIORITY
- bool "priority"
- help
- Tries the compressors in a predefined order and chooses the first
- successful one.
+ bool "priority"
+ help
+ Tries the compressors in a predefined order and chooses the first
+ successful one.
config JFFS2_CMODE_SIZE
- bool "size (EXPERIMENTAL)"
- help
- Tries all compressors and chooses the one which has the smallest
- result.
+ bool "size (EXPERIMENTAL)"
+ help
+ Tries all compressors and chooses the one which has the smallest
+ result.
+
+config JFFS2_CMODE_FAVOURLZO
+ bool "Favour LZO"
+ help
+ Tries all compressors and chooses the one which has the smallest
+ result but gives some preference to LZO (which has faster
+ decompression) at the expense of size.
endchoice
diff --git a/fs/jffs2/Makefile b/fs/jffs2/Makefile
index c32b241e3d9..60e5d49ca03 100644
--- a/fs/jffs2/Makefile
+++ b/fs/jffs2/Makefile
@@ -17,4 +17,5 @@ jffs2-$(CONFIG_JFFS2_FS_POSIX_ACL) += acl.o
jffs2-$(CONFIG_JFFS2_RUBIN) += compr_rubin.o
jffs2-$(CONFIG_JFFS2_RTIME) += compr_rtime.o
jffs2-$(CONFIG_JFFS2_ZLIB) += compr_zlib.o
+jffs2-$(CONFIG_JFFS2_LZO) += compr_lzo.o
jffs2-$(CONFIG_JFFS2_SUMMARY) += summary.o
diff --git a/fs/jffs2/acl.c b/fs/jffs2/acl.c
index 65b3a1b5b88..8ec9323e830 100644
--- a/fs/jffs2/acl.c
+++ b/fs/jffs2/acl.c
@@ -176,7 +176,7 @@ static void jffs2_iset_acl(struct inode *inode, struct posix_acl **i_acl, struct
spin_unlock(&inode->i_lock);
}
-static struct posix_acl *jffs2_get_acl(struct inode *inode, int type)
+struct posix_acl *jffs2_get_acl(struct inode *inode, int type)
{
struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
struct posix_acl *acl;
@@ -247,8 +247,13 @@ static int jffs2_set_acl(struct inode *inode, int type, struct posix_acl *acl)
if (rc < 0)
return rc;
if (inode->i_mode != mode) {
- inode->i_mode = mode;
- jffs2_dirty_inode(inode);
+ struct iattr attr;
+
+ attr.ia_valid = ATTR_MODE;
+ attr.ia_mode = mode;
+ rc = jffs2_do_setattr(inode, &attr);
+ if (rc < 0)
+ return rc;
}
if (rc == 0)
acl = NULL;
@@ -307,22 +312,16 @@ int jffs2_permission(struct inode *inode, int mask, struct nameidata *nd)
return generic_permission(inode, mask, jffs2_check_acl);
}
-int jffs2_init_acl(struct inode *inode, struct inode *dir)
+int jffs2_init_acl(struct inode *inode, struct posix_acl *acl)
{
struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
- struct posix_acl *acl = NULL, *clone;
+ struct posix_acl *clone;
mode_t mode;
int rc = 0;
f->i_acl_access = JFFS2_ACL_NOT_CACHED;
f->i_acl_default = JFFS2_ACL_NOT_CACHED;
- if (!S_ISLNK(inode->i_mode)) {
- acl = jffs2_get_acl(dir, ACL_TYPE_DEFAULT);
- if (IS_ERR(acl))
- return PTR_ERR(acl);
- if (!acl)
- inode->i_mode &= ~current->fs->umask;
- }
+
if (acl) {
if (S_ISDIR(inode->i_mode)) {
rc = jffs2_set_acl(inode, ACL_TYPE_DEFAULT, acl);
diff --git a/fs/jffs2/acl.h b/fs/jffs2/acl.h
index c84378cee82..90a2dbf5905 100644
--- a/fs/jffs2/acl.h
+++ b/fs/jffs2/acl.h
@@ -28,9 +28,10 @@ struct jffs2_acl_header {
#define JFFS2_ACL_NOT_CACHED ((void *)-1)
+extern struct posix_acl *jffs2_get_acl(struct inode *inode, int type);
extern int jffs2_permission(struct inode *, int, struct nameidata *);
extern int jffs2_acl_chmod(struct inode *);
-extern int jffs2_init_acl(struct inode *, struct inode *);
+extern int jffs2_init_acl(struct inode *, struct posix_acl *);
extern void jffs2_clear_acl(struct jffs2_inode_info *);
extern struct xattr_handler jffs2_acl_access_xattr_handler;
@@ -38,6 +39,7 @@ extern struct xattr_handler jffs2_acl_default_xattr_handler;
#else
+#define jffs2_get_acl(inode, type) (NULL)
#define jffs2_permission NULL
#define jffs2_acl_chmod(inode) (0)
#define jffs2_init_acl(inode,dir) (0)
diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c
index 504643f2e98..d568ae84674 100644
--- a/fs/jffs2/background.c
+++ b/fs/jffs2/background.c
@@ -23,8 +23,8 @@ static int jffs2_garbage_collect_thread(void *);
void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c)
{
spin_lock(&c->erase_completion_lock);
- if (c->gc_task && jffs2_thread_should_wake(c))
- send_sig(SIGHUP, c->gc_task, 1);
+ if (c->gc_task && jffs2_thread_should_wake(c))
+ send_sig(SIGHUP, c->gc_task, 1);
spin_unlock(&c->erase_completion_lock);
}
diff --git a/fs/jffs2/build.c b/fs/jffs2/build.c
index 0ca2fff2617..722a6b68295 100644
--- a/fs/jffs2/build.c
+++ b/fs/jffs2/build.c
@@ -285,6 +285,14 @@ static void jffs2_calc_trigger_levels(struct jffs2_sb_info *c)
than actually making progress? */
c->resv_blocks_gcbad = 0;//c->resv_blocks_deletion + 2;
+ /* What number of 'very dirty' eraseblocks do we allow before we
+ trigger the GC thread even if we don't _need_ the space. When we
+ can't mark nodes obsolete on the medium, the old dirty nodes cause
+ performance problems because we have to inspect and discard them. */
+ c->vdirty_blocks_gctrigger = c->resv_blocks_gctrigger;
+ if (jffs2_can_mark_obsolete(c))
+ c->vdirty_blocks_gctrigger *= 10;
+
/* If there's less than this amount of dirty space, don't bother
trying to GC to make more space. It'll be a fruitless task */
c->nospc_dirty_size = c->sector_size + (c->flash_size / 100);
@@ -303,6 +311,8 @@ static void jffs2_calc_trigger_levels(struct jffs2_sb_info *c)
c->resv_blocks_gcbad, c->resv_blocks_gcbad*c->sector_size/1024);
dbg_fsbuild("Amount of dirty space required to GC: %d bytes\n",
c->nospc_dirty_size);
+ dbg_fsbuild("Very dirty blocks before GC triggered: %d\n",
+ c->vdirty_blocks_gctrigger);
}
int jffs2_do_mount_fs(struct jffs2_sb_info *c)
diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
index 485d065de41..86739ee53b3 100644
--- a/fs/jffs2/compr.c
+++ b/fs/jffs2/compr.c
@@ -5,7 +5,7 @@
* Created by Arjan van de Ven <arjanv@redhat.com>
*
* Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
- * University of Szeged, Hungary
+ * University of Szeged, Hungary
*
* For licensing information, see the file 'LICENCE' in this directory.
*
@@ -24,6 +24,34 @@ static int jffs2_compression_mode = JFFS2_COMPR_MODE_PRIORITY;
/* Statistics for blocks stored without compression */
static uint32_t none_stat_compr_blocks=0,none_stat_decompr_blocks=0,none_stat_compr_size=0;
+
+/*
+ * Return 1 to use this compression
+ */
+static int jffs2_is_best_compression(struct jffs2_compressor *this,
+ struct jffs2_compressor *best, uint32_t size, uint32_t bestsize)
+{
+ switch (jffs2_compression_mode) {
+ case JFFS2_COMPR_MODE_SIZE:
+ if (bestsize > size)
+ return 1;
+ return 0;
+ case JFFS2_COMPR_MODE_FAVOURLZO:
+ if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > size))
+ return 1;
+ if ((best->compr != JFFS2_COMPR_LZO) && (bestsize > size))
+ return 1;
+ if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > (size * FAVOUR_LZO_PERCENT / 100)))
+ return 1;
+ if ((bestsize * FAVOUR_LZO_PERCENT / 100) > size)
+ return 1;
+
+ return 0;
+ }
+ /* Shouldn't happen */
+ return 0;
+}
+
/* jffs2_compress:
* @data: Pointer to uncompressed data
* @cdata: Pointer to returned pointer to buffer for compressed data
@@ -43,121 +71,124 @@ static uint32_t none_stat_compr_blocks=0,none_stat_decompr_blocks=0,none_stat_co
* *datalen accordingly to show the amount of data which were compressed.
*/
uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
- unsigned char *data_in, unsigned char **cpage_out,
- uint32_t *datalen, uint32_t *cdatalen)
+ unsigned char *data_in, unsigned char **cpage_out,
+ uint32_t *datalen, uint32_t *cdatalen)
{
int ret = JFFS2_COMPR_NONE;
- int compr_ret;
- struct jffs2_compressor *this, *best=NULL;
- unsigned char *output_buf = NULL, *tmp_buf;
- uint32_t orig_slen, orig_dlen;
- uint32_t best_slen=0, best_dlen=0;
+ int compr_ret;
+ struct jffs2_compressor *this, *best=NULL;
+ unsigned char *output_buf = NULL, *tmp_buf;
+ uint32_t orig_slen, orig_dlen;
+ uint32_t best_slen=0, best_dlen=0;
- switch (jffs2_compression_mode) {
- case JFFS2_COMPR_MODE_NONE:
- break;
- case JFFS2_COMPR_MODE_PRIORITY:
- output_buf = kmalloc(*cdatalen,GFP_KERNEL);
- if (!output_buf) {
- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
- goto out;
- }
- orig_slen = *datalen;
- orig_dlen = *cdatalen;
- spin_lock(&jffs2_compressor_list_lock);
- list_for_each_entry(this, &jffs2_compressor_list, list) {
- /* Skip decompress-only backwards-compatibility and disabled modules */
- if ((!this->compress)||(this->disabled))
- continue;
+ switch (jffs2_compression_mode) {
+ case JFFS2_COMPR_MODE_NONE:
+ break;
+ case JFFS2_COMPR_MODE_PRIORITY:
+ output_buf = kmalloc(*cdatalen,GFP_KERNEL);
+ if (!output_buf) {
+ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
+ goto out;
+ }
+ orig_slen = *datalen;
+ orig_dlen = *cdatalen;
+ spin_lock(&jffs2_compressor_list_lock);
+ list_for_each_entry(this, &jffs2_compressor_list, list) {
+ /* Skip decompress-only backwards-compatibility and disabled modules */
+ if ((!this->compress)||(this->disabled))
+ continue;
- this->usecount++;
- spin_unlock(&jffs2_compressor_list_lock);
- *datalen = orig_slen;
- *cdatalen = orig_dlen;
- compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL);
- spin_lock(&jffs2_compressor_list_lock);
- this->usecount--;
- if (!compr_ret) {
- ret = this->compr;
- this->stat_compr_blocks++;
- this->stat_compr_orig_size += *datalen;
- this->stat_compr_new_size += *cdatalen;
- break;
- }
- }
- spin_unlock(&jffs2_compressor_list_lock);
- if (ret == JFFS2_COMPR_NONE) kfree(output_buf);
- break;
- case JFFS2_COMPR_MODE_SIZE:
- orig_slen = *datalen;
- orig_dlen = *cdatalen;
- spin_lock(&jffs2_compressor_list_lock);
- list_for_each_entry(this, &jffs2_compressor_list, list) {
- /* Skip decompress-only backwards-compatibility and disabled modules */
- if ((!this->compress)||(this->disabled))
- continue;
- /* Allocating memory for output buffer if necessary */
- if ((this->compr_buf_size<orig_dlen)&&(this->compr_buf)) {
- spin_unlock(&jffs2_compressor_list_lock);
- kfree(this->compr_buf);
- spin_lock(&jffs2_compressor_list_lock);
- this->compr_buf_size=0;
- this->compr_buf=NULL;
- }
- if (!this->compr_buf) {
- spin_unlock(&jffs2_compressor_list_lock);
- tmp_buf = kmalloc(orig_dlen,GFP_KERNEL);
- spin_lock(&jffs2_compressor_list_lock);
- if (!tmp_buf) {
- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen);
- continue;
- }
- else {
- this->compr_buf = tmp_buf;
- this->compr_buf_size = orig_dlen;
- }
- }
- this->usecount++;
- spin_unlock(&jffs2_compressor_list_lock);
- *datalen = orig_slen;
- *cdatalen = orig_dlen;
- compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL);
- spin_lock(&jffs2_compressor_list_lock);
- this->usecount--;
- if (!compr_ret) {
- if ((!best_dlen)||(best_dlen>*cdatalen)) {
- best_dlen = *cdatalen;
- best_slen = *datalen;
- best = this;
- }
- }
- }
- if (best_dlen) {
- *cdatalen = best_dlen;
- *datalen = best_slen;
- output_buf = best->compr_buf;
- best->compr_buf = NULL;
- best->compr_buf_size = 0;
- best->stat_compr_blocks++;
- best->stat_compr_orig_size += best_slen;
- best->stat_compr_new_size += best_dlen;
- ret = best->compr;
- }
- spin_unlock(&jffs2_compressor_list_lock);
- break;
- default:
- printk(KERN_ERR "JFFS2: unknow compression mode.\n");
- }
+ this->usecount++;
+ spin_unlock(&jffs2_compressor_list_lock);
+ *datalen = orig_slen;
+ *cdatalen = orig_dlen;
+ compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL);
+ spin_lock(&jffs2_compressor_list_lock);
+ this->usecount--;
+ if (!compr_ret) {
+ ret = this->compr;
+ this->stat_compr_blocks++;
+ this->stat_compr_orig_size += *datalen;
+ this->stat_compr_new_size += *cdatalen;
+ break;
+ }
+ }
+ spin_unlock(&jffs2_compressor_list_lock);
+ if (ret == JFFS2_COMPR_NONE)
+ kfree(output_buf);
+ break;
+ case JFFS2_COMPR_MODE_SIZE:
+ case JFFS2_COMPR_MODE_FAVOURLZO:
+ orig_slen = *datalen;
+ orig_dlen = *cdatalen;
+ spin_lock(&jffs2_compressor_list_lock);
+ list_for_each_entry(this, &jffs2_compressor_list, list) {
+ /* Skip decompress-only backwards-compatibility and disabled modules */
+ if ((!this->compress)||(this->disabled))
+ continue;
+ /* Allocating memory for output buffer if necessary */
+ if ((this->compr_buf_size < orig_slen) && (this->compr_buf)) {
+ spin_unlock(&jffs2_compressor_list_lock);
+ kfree(this->compr_buf);
+ spin_lock(&jffs2_compressor_list_lock);
+ this->compr_buf_size=0;
+ this->compr_buf=NULL;
+ }
+ if (!this->compr_buf) {
+ spin_unlock(&jffs2_compressor_list_lock);
+ tmp_buf = kmalloc(orig_slen, GFP_KERNEL);
+ spin_lock(&jffs2_compressor_list_lock);
+ if (!tmp_buf) {
+ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n", orig_slen);
+ continue;
+ }
+ else {
+ this->compr_buf = tmp_buf;
+ this->compr_buf_size = orig_slen;
+ }
+ }
+ this->usecount++;
+ spin_unlock(&jffs2_compressor_list_lock);
+ *datalen = orig_slen;
+ *cdatalen = orig_dlen;
+ compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL);
+ spin_lock(&jffs2_compressor_list_lock);
+ this->usecount--;
+ if (!compr_ret) {
+ if (((!best_dlen) || jffs2_is_best_compression(this, best, *cdatalen, best_dlen))
+ && (*cdatalen < *datalen)) {
+ best_dlen = *cdatalen;
+ best_slen = *datalen;
+ best = this;
+ }
+ }
+ }
+ if (best_dlen) {
+ *cdatalen = best_dlen;
+ *datalen = best_slen;
+ output_buf = best->compr_buf;
+ best->compr_buf = NULL;
+ best->compr_buf_size = 0;
+ best->stat_compr_blocks++;
+ best->stat_compr_orig_size += best_slen;
+ best->stat_compr_new_size += best_dlen;
+ ret = best->compr;
+ }
+ spin_unlock(&jffs2_compressor_list_lock);
+ break;
+ default:
+ printk(KERN_ERR "JFFS2: unknow compression mode.\n");
+ }
out:
- if (ret == JFFS2_COMPR_NONE) {
- *cpage_out = data_in;
- *datalen = *cdatalen;
- none_stat_compr_blocks++;
- none_stat_compr_size += *datalen;
- }
- else {
- *cpage_out = output_buf;
- }
+ if (ret == JFFS2_COMPR_NONE) {
+ *cpage_out = data_in;
+ *datalen = *cdatalen;
+ none_stat_compr_blocks++;
+ none_stat_compr_size += *datalen;
+ }
+ else {
+ *cpage_out = output_buf;
+ }
return ret;
}
@@ -165,8 +196,8 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
uint16_t comprtype, unsigned char *cdata_in,
unsigned char *data_out, uint32_t cdatalen, uint32_t datalen)
{
- struct jffs2_compressor *this;
- int ret;
+ struct jffs2_compressor *this;
+ int ret;
/* Older code had a bug where it would write non-zero 'usercompr'
fields. Deal with it. */
@@ -177,32 +208,32 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
case JFFS2_COMPR_NONE:
/* This should be special-cased elsewhere, but we might as well deal with it */
memcpy(data_out, cdata_in, datalen);
- none_stat_decompr_blocks++;
+ none_stat_decompr_blocks++;
break;
case JFFS2_COMPR_ZERO:
memset(data_out, 0, datalen);
break;
default:
- spin_lock(&jffs2_compressor_list_lock);
- list_for_each_entry(this, &jffs2_compressor_list, list) {
- if (comprtype == this->compr) {
- this->usecount++;
- spin_unlock(&jffs2_compressor_list_lock);
- ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL);
- spin_lock(&jffs2_compressor_list_lock);
- if (ret) {
- printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret);
- }
- else {
- this->stat_decompr_blocks++;
- }
- this->usecount--;
- spin_unlock(&jffs2_compressor_list_lock);
- return ret;
- }
- }
+ spin_lock(&jffs2_compressor_list_lock);
+ list_for_each_entry(this, &jffs2_compressor_list, list) {
+ if (comprtype == this->compr) {
+ this->usecount++;
+ spin_unlock(&jffs2_compressor_list_lock);
+ ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL);
+ spin_lock(&jffs2_compressor_list_lock);
+ if (ret) {
+ printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret);
+ }
+ else {
+ this->stat_decompr_blocks++;
+ }
+ this->usecount--;
+ spin_unlock(&jffs2_compressor_list_lock);
+ return ret;
+ }
+ }
printk(KERN_WARNING "JFFS2 compression type 0x%02x not available.\n", comprtype);
- spin_unlock(&jffs2_compressor_list_lock);
+ spin_unlock(&jffs2_compressor_list_lock);
return -EIO;
}
return 0;
@@ -210,108 +241,119 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
int jffs2_register_compressor(struct jffs2_compressor *comp)
{
- struct jffs2_compressor *this;
+ struct jffs2_compressor *this;
- if (!comp->name) {
- printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n");
- return -1;
- }
- comp->compr_buf_size=0;
- comp->compr_buf=NULL;
- comp->usecount=0;
- comp->stat_compr_orig_size=0;
- comp->stat_compr_new_size=0;
- comp->stat_compr_blocks=0;
- comp->stat_decompr_blocks=0;
- D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
+ if (!comp->name) {
+ printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n");
+ return -1;
+ }
+ comp->compr_buf_size=0;
+ comp->compr_buf=NULL;
+ comp->usecount=0;
+ comp->stat_compr_orig_size=0;
+ comp->stat_compr_new_size=0;
+ comp->stat_compr_blocks=0;
+ comp->stat_decompr_blocks=0;
+ D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
- spin_lock(&jffs2_compressor_list_lock);
+ spin_lock(&jffs2_compressor_list_lock);
- list_for_each_entry(this, &jffs2_compressor_list, list) {
- if (this->priority < comp->priority) {
- list_add(&comp->list, this->list.prev);
- goto out;
- }
- }
- list_add_tail(&comp->list, &jffs2_compressor_list);
+ list_for_each_entry(this, &jffs2_compressor_list, list) {
+ if (this->priority < comp->priority) {
+ list_add(&comp->list, this->list.prev);
+ goto out;
+ }
+ }
+ list_add_tail(&comp->list, &jffs2_compressor_list);
out:
- D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
- })
+ D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
+ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
+ })
- spin_unlock(&jffs2_compressor_list_lock);
+ spin_unlock(&jffs2_compressor_list_lock);
- return 0;
+ return 0;
}
int jffs2_unregister_compressor(struct jffs2_compressor *comp)
{
- D2(struct jffs2_compressor *this;)
+ D2(struct jffs2_compressor *this;)
- D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
+ D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
- spin_lock(&jffs2_compressor_list_lock);
+ spin_lock(&jffs2_compressor_list_lock);
- if (comp->usecount) {
- spin_unlock(&jffs2_compressor_list_lock);
- printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
- return -1;
- }
- list_del(&comp->list);
+ if (comp->usecount) {
+ spin_unlock(&jffs2_compressor_list_lock);
+ printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
+ return -1;
+ }
+ list_del(&comp->list);
- D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
- })
- spin_unlock(&jffs2_compressor_list_lock);
- return 0;
+ D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
+ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
+ })
+ spin_unlock(&jffs2_compressor_list_lock);
+ return 0;
}
void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig)
{
- if (orig != comprbuf)
- kfree(comprbuf);
+ if (orig != comprbuf)
+ kfree(comprbuf);
}
int __init jffs2_compressors_init(void)
{
/* Registering compressors */
#ifdef CONFIG_JFFS2_ZLIB
- jffs2_zlib_init();
+ jffs2_zlib_init();
#endif
#ifdef CONFIG_JFFS2_RTIME
- jffs2_rtime_init();
+ jffs2_rtime_init();
#endif
#ifdef CONFIG_JFFS2_RUBIN
- jffs2_rubinmips_init();
- jffs2_dynrubin_init();
+ jffs2_rubinmips_init();
+ jffs2_dynrubin_init();
+#endif
+#ifdef CONFIG_JFFS2_LZO
+ jffs2_lzo_init();
#endif
/* Setting default compression mode */
#ifdef CONFIG_JFFS2_CMODE_NONE
- jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
- D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");)
+ jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
+ D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");)
#else
#ifdef CONFIG_JFFS2_CMODE_SIZE
- jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
- D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");)
+ jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
+ D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");)
+#else
+#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
+ jffs2_compression_mode = JFFS2_COMPR_MODE_FAVOURLZO;
+ D1(printk(KERN_INFO "JFFS2: default compression mode: favourlzo\n");)
#else
- D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");)
+ D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");)
+#endif
#endif
#endif
- return 0;
+ return 0;
}
int jffs2_compressors_exit(void)
{
/* Unregistering compressors */
+#ifdef CONFIG_JFFS2_LZO
+ jffs2_lzo_exit();
+#endif
#ifdef CONFIG_JFFS2_RUBIN
- jffs2_dynrubin_exit();
- jffs2_rubinmips_exit();
+ jffs2_dynrubin_exit();
+ jffs2_rubinmips_exit();
#endif
#ifdef CONFIG_JFFS2_RTIME
- jffs2_rtime_exit();
+ jffs2_rtime_exit();
#endif
#ifdef CONFIG_JFFS2_ZLIB
- jffs2_zlib_exit();
+ jffs2_zlib_exit();
#endif
- return 0;
+ return 0;
}
diff --git a/fs/jffs2/compr.h b/fs/jffs2/compr.h
index 68cc7010dbd..7d1d72faa77 100644
--- a/fs/jffs2/compr.h
+++ b/fs/jffs2/compr.h
@@ -2,7 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
- * University of Szeged, Hungary
+ * University of Szeged, Hungary
*
* For licensing information, see the file 'LICENCE' in this directory.
*
@@ -27,34 +27,38 @@
#define JFFS2_RUBINMIPS_PRIORITY 10
#define JFFS2_DYNRUBIN_PRIORITY 20
#define JFFS2_LZARI_PRIORITY 30
-#define JFFS2_LZO_PRIORITY 40
#define JFFS2_RTIME_PRIORITY 50
#define JFFS2_ZLIB_PRIORITY 60
+#define JFFS2_LZO_PRIORITY 80
+
#define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
-#define JFFS2_DYNRUBIN_DISABLED /* for decompression */
+#define JFFS2_DYNRUBIN_DISABLED /* for decompression */
#define JFFS2_COMPR_MODE_NONE 0
#define JFFS2_COMPR_MODE_PRIORITY 1
#define JFFS2_COMPR_MODE_SIZE 2
+#define JFFS2_COMPR_MODE_FAVOURLZO 3
+
+#define FAVOUR_LZO_PERCENT 80
struct jffs2_compressor {
- struct list_head list;
- int priority; /* used by prirority comr. mode */
- char *name;
- char compr; /* JFFS2_COMPR_XXX */
- int (*compress)(unsigned char *data_in, unsigned char *cpage_out,
- uint32_t *srclen, uint32_t *destlen, void *model);
- int (*decompress)(unsigned char *cdata_in, unsigned char *data_out,
- uint32_t cdatalen, uint32_t datalen, void *model);
- int usecount;
- int disabled; /* if seted the compressor won't compress */
- unsigned char *compr_buf; /* used by size compr. mode */
- uint32_t compr_buf_size; /* used by size compr. mode */
- uint32_t stat_compr_orig_size;
- uint32_t stat_compr_new_size;
- uint32_t stat_compr_blocks;
- uint32_t stat_decompr_blocks;
+ struct list_head list;
+ int priority; /* used by prirority comr. mode */
+ char *name;
+ char compr; /* JFFS2_COMPR_XXX */
+ int (*compress)(unsigned char *data_in, unsigned char *cpage_out,
+ uint32_t *srclen, uint32_t *destlen, void *model);
+ int (*decompress)(unsigned char *cdata_in, unsigned char *data_out,
+ uint32_t cdatalen, uint32_t datalen, void *model);
+ int usecount;
+ int disabled; /* if set the compressor won't compress */
+ unsigned char *compr_buf; /* used by size compr. mode */
+ uint32_t compr_buf_size; /* used by size compr. mode */
+ uint32_t stat_compr_orig_size;
+ uint32_t stat_compr_new_size;
+ uint32_t stat_compr_blocks;
+ uint32_t stat_decompr_blocks;
};
int jffs2_register_compressor(struct jffs2_compressor *comp);
@@ -64,12 +68,12 @@ int jffs2_compressors_init(void);
int jffs2_compressors_exit(void);
uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
- unsigned char *data_in, unsigned char **cpage_out,
- uint32_t *datalen, uint32_t *cdatalen);
+ unsigned char *data_in, unsigned char **cpage_out,
+ uint32_t *datalen, uint32_t *cdatalen);
int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
- uint16_t comprtype, unsigned char *cdata_in,
- unsigned char *data_out, uint32_t cdatalen, uint32_t datalen);
+ uint16_t comprtype, unsigned char *cdata_in,
+ unsigned char *data_out, uint32_t cdatalen, uint32_t datalen);
void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig);
@@ -90,5 +94,9 @@ void jffs2_rtime_exit(void);
int jffs2_zlib_init(void);
void jffs2_zlib_exit(void);
#endif
+#ifdef CONFIG_JFFS2_LZO
+int jffs2_lzo_init(void);
+void jffs2_lzo_exit(void);
+#endif
#endif /* __JFFS2_COMPR_H__ */
diff --git a/fs/jffs2/compr_lzo.c b/fs/jffs2/compr_lzo.c
new file mode 100644
index 00000000000..47b045797e4
--- /dev/null
+++ b/fs/jffs2/compr_lzo.c
@@ -0,0 +1,108 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2007 Nokia Corporation. All rights reserved.
+ *
+ * Created by Richard Purdie <rpurdie@openedhand.com>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/lzo.h>
+#include "compr.h"
+
+static void *lzo_mem;
+static void *lzo_compress_buf;
+static DEFINE_MUTEX(deflate_mutex);
+
+static void free_workspace(void)
+{
+ vfree(lzo_mem);
+ vfree(lzo_compress_buf);
+}
+
+static int __init alloc_workspace(void)
+{
+ lzo_mem = vmalloc(LZO1X_MEM_COMPRESS);
+ lzo_compress_buf = vmalloc(lzo1x_worst_compress(PAGE_SIZE));
+
+ if (!lzo_mem || !lzo_compress_buf) {
+ printk(KERN_WARNING "Failed to allocate lzo deflate workspace\n");
+ free_workspace();
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int jffs2_lzo_compress(unsigned char *data_in, unsigned char *cpage_out,
+ uint32_t *sourcelen, uint32_t *dstlen, void *model)
+{
+ size_t compress_size;
+ int ret;
+
+ mutex_lock(&deflate_mutex);
+ ret = lzo1x_1_compress(data_in, *sourcelen, lzo_compress_buf, &compress_size, lzo_mem);
+ mutex_unlock(&deflate_mutex);
+
+ if (ret != LZO_E_OK)
+ return -1;
+
+ if (compress_size > *dstlen)
+ return -1;
+
+ memcpy(cpage_out, lzo_compress_buf, compress_size);
+ *dstlen = compress_size;
+
+ return 0;
+}
+
+static int jffs2_lzo_decompress(unsigned char *data_in, unsigned char *cpage_out,
+ uint32_t srclen, uint32_t destlen, void *model)
+{
+ size_t dl = destlen;
+ int ret;
+
+ ret = lzo1x_decompress_safe(data_in, srclen, cpage_out, &dl);
+
+ if (ret != LZO_E_OK || dl != destlen)
+ return -1;
+
+ return 0;
+}
+
+static struct jffs2_compressor jffs2_lzo_comp = {
+ .priority = JFFS2_LZO_PRIORITY,
+ .name = "lzo",
+ .compr = JFFS2_COMPR_LZO,
+ .compress = &jffs2_lzo_compress,
+ .decompress = &jffs2_lzo_decompress,
+ .disabled = 0,
+};
+
+int __init jffs2_lzo_init(void)
+{
+ int ret;
+
+ ret = alloc_workspace();
+ if (ret < 0)
+ return ret;
+
+ ret = jffs2_register_compressor(&jffs2_lzo_comp);
+ if (ret)
+ free_workspace();
+
+ return ret;
+}
+
+void jffs2_lzo_exit(void)
+{
+ jffs2_unregister_compressor(&jffs2_lzo_comp);
+ free_workspace();
+}
diff --git a/fs/jffs2/compr_rtime.c b/fs/jffs2/compr_rtime.c
index 0d0bfd2e4e0..546d1538d07 100644
--- a/fs/jffs2/compr_rtime.c
+++ b/fs/jffs2/compr_rtime.c
@@ -104,7 +104,7 @@ static int jffs2_rtime_decompress(unsigned char *data_in,
}
}
}
- return 0;
+ return 0;
}
static struct jffs2_compressor jffs2_rtime_comp = {
diff --git a/fs/jffs2/compr_rubin.c b/fs/jffs2/compr_rubin.c
index ea0431e047d..c73fa89b5f8 100644
--- a/fs/jffs2/compr_rubin.c
+++ b/fs/jffs2/compr_rubin.c
@@ -384,7 +384,7 @@ static int jffs2_rubinmips_decompress(unsigned char *data_in,
void *model)
{
rubin_do_decompress(BIT_DIVIDER_MIPS, bits_mips, data_in, cpage_out, sourcelen, dstlen);
- return 0;
+ return 0;
}
static int jffs2_dynrubin_decompress(unsigned char *data_in,
@@ -399,7 +399,7 @@ static int jffs2_dynrubin_decompress(unsigned char *data_in,
bits[c] = data_in[c];
rubin_do_decompress(256, bits, data_in+8, cpage_out, sourcelen-8, dstlen);
- return 0;
+ return 0;
}
static struct jffs2_compressor jffs2_rubinmips_comp = {
diff --git a/fs/jffs2/compr_zlib.c b/fs/jffs2/compr_zlib.c
index 2b87fccc155..cfd301a5edf 100644
--- a/fs/jffs2/compr_zlib.c
+++ b/fs/jffs2/compr_zlib.c
@@ -181,7 +181,7 @@ static int jffs2_zlib_decompress(unsigned char *data_in,
}
zlib_inflateEnd(&inf_strm);
mutex_unlock(&inflate_mutex);
- return 0;
+ return 0;
}
static struct jffs2_compressor jffs2_zlib_comp = {
@@ -203,11 +203,11 @@ int __init jffs2_zlib_init(void)
ret = alloc_workspaces();
if (ret)
- return ret;
+ return ret;
ret = jffs2_register_compressor(&jffs2_zlib_comp);
if (ret)
- free_workspaces();
+ free_workspaces();
return ret;
}
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index c1dfca310dd..8353eb9c179 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -32,7 +32,7 @@ static int jffs2_mkdir (struct inode *,struct dentry *,int);
static int jffs2_rmdir (struct inode *,struct dentry *);
static int jffs2_mknod (struct inode *,struct dentry *,int,dev_t);
static int jffs2_rename (struct inode *, struct dentry *,
- struct inode *, struct dentry *);
+ struct inode *, struct dentry *);
const struct file_operations jffs2_dir_operations =
{
@@ -182,6 +182,7 @@ static int jffs2_create(struct inode *dir_i, struct dentry *dentry, int mode,
struct jffs2_inode_info *f, *dir_f;
struct jffs2_sb_info *c;
struct inode *inode;
+ struct posix_acl *acl;
int ret;
ri = jffs2_alloc_raw_inode();
@@ -192,7 +193,7 @@ static int jffs2_create(struct inode *dir_i, struct dentry *dentry, int mode,
D1(printk(KERN_DEBUG "jffs2_create()\n"));
- inode = jffs2_new_inode(dir_i, mode, ri);
+ inode = jffs2_new_inode(dir_i, mode, ri, &acl);
if (IS_ERR(inode)) {
D1(printk(KERN_DEBUG "jffs2_new_inode() failed\n"));
@@ -212,12 +213,12 @@ static int jffs2_create(struct inode *dir_i, struct dentry *dentry, int mode,
dentry->d_name.name, dentry->d_name.len);
if (ret)
- goto fail;
+ goto fail_acl;
ret = jffs2_init_security(inode, dir_i);
if (ret)
- goto fail;
- ret = jffs2_init_acl(inode, dir_i);
+ goto fail_acl;
+ ret = jffs2_init_acl(inode, acl);
if (ret)
goto fail;
@@ -230,6 +231,8 @@ static int jffs2_create(struct inode *dir_i, struct dentry *dentry, int mode,
inode->i_ino, inode->i_mode, inode->i_nlink, f->inocache->nlink, inode->i_mapping->nrpages));
return 0;
+ fail_acl:
+ posix_acl_release(acl);
fail:
make_bad_inode(inode);
iput(inode);
@@ -306,6 +309,7 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
struct jffs2_full_dirent *fd;
int namelen;
uint32_t alloclen;
+ struct posix_acl *acl;
int ret, targetlen = strlen(target);
/* FIXME: If you care. We'd need to use frags for the target
@@ -332,7 +336,7 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
return ret;
}
- inode = jffs2_new_inode(dir_i, S_IFLNK | S_IRWXUGO, ri);
+ inode = jffs2_new_inode(dir_i, S_IFLNK | S_IRWXUGO, ri, &acl);
if (IS_ERR(inode)) {
jffs2_free_raw_inode(ri);
@@ -362,6 +366,7 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
up(&f->sem);
jffs2_complete_reservation(c);
jffs2_clear_inode(inode);
+ posix_acl_release(acl);
return PTR_ERR(fn);
}
@@ -372,6 +377,7 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
up(&f->sem);
jffs2_complete_reservation(c);
jffs2_clear_inode(inode);
+ posix_acl_release(acl);
return -ENOMEM;
}
@@ -389,9 +395,10 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
ret = jffs2_init_security(inode, dir_i);
if (ret) {
jffs2_clear_inode(inode);
+ posix_acl_release(acl);
return ret;
}
- ret = jffs2_init_acl(inode, dir_i);
+ ret = jffs2_init_acl(inode, acl);
if (ret) {
jffs2_clear_inode(inode);
return ret;
@@ -469,6 +476,7 @@ static int jffs2_mkdir (struct inode *dir_i, struct dentry *dentry, int mode)
struct jffs2_full_dirent *fd;
int namelen;
uint32_t alloclen;
+ struct posix_acl *acl;
int ret;
mode |= S_IFDIR;
@@ -491,7 +499,7 @@ static int jffs2_mkdir (struct inode *dir_i, struct dentry *dentry, int mode)
return ret;
}
- inode = jffs2_new_inode(dir_i, mode, ri);
+ inode = jffs2_new_inode(dir_i, mode, ri, &acl);
if (IS_ERR(inode)) {
jffs2_free_raw_inode(ri);
@@ -518,6 +526,7 @@ static int jffs2_mkdir (struct inode *dir_i, struct dentry *dentry, int mode)
up(&f->sem);
jffs2_complete_reservation(c);
jffs2_clear_inode(inode);
+ posix_acl_release(acl);
return PTR_ERR(fn);
}
/* No data here. Only a metadata node, which will be
@@ -531,9 +540,10 @@ static int jffs2_mkdir (struct inode *dir_i, struct dentry *dentry, int mode)
ret = jffs2_init_security(inode, dir_i);
if (ret) {
jffs2_clear_inode(inode);
+ posix_acl_release(acl);
return ret;
}
- ret = jffs2_init_acl(inode, dir_i);
+ ret = jffs2_init_acl(inode, acl);
if (ret) {
jffs2_clear_inode(inode);
return ret;
@@ -629,6 +639,7 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de
union jffs2_device_node dev;
int devlen = 0;
uint32_t alloclen;
+ struct posix_acl *acl;
int ret;
if (!new_valid_dev(rdev))
@@ -655,7 +666,7 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de
return ret;
}
- inode = jffs2_new_inode(dir_i, mode, ri);
+ inode = jffs2_new_inode(dir_i, mode, ri, &acl);
if (IS_ERR(inode)) {
jffs2_free_raw_inode(ri);
@@ -684,6 +695,7 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de
up(&f->sem);
jffs2_complete_reservation(c);
jffs2_clear_inode(inode);
+ posix_acl_release(acl);
return PTR_ERR(fn);
}
/* No data here. Only a metadata node, which will be
@@ -697,9 +709,10 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de
ret = jffs2_init_security(inode, dir_i);
if (ret) {
jffs2_clear_inode(inode);
+ posix_acl_release(acl);
return ret;
}
- ret = jffs2_init_acl(inode, dir_i);
+ ret = jffs2_init_acl(inode, acl);
if (ret) {
jffs2_clear_inode(inode);
return ret;
@@ -770,7 +783,7 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de
}
static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
- struct inode *new_dir_i, struct dentry *new_dentry)
+ struct inode *new_dir_i, struct dentry *new_dentry)
{
int ret;
struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index 66e7c2f1e64..a1db9180633 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -38,8 +38,8 @@ static void jffs2_erase_block(struct jffs2_sb_info *c,
#ifdef __ECOS
ret = jffs2_flash_erase(c, jeb);
if (!ret) {
- jffs2_erase_succeeded(c, jeb);
- return;
+ jffs2_erase_succeeded(c, jeb);
+ return;
}
bad_offset = jeb->offset;
#else /* Linux */
@@ -50,12 +50,14 @@ static void jffs2_erase_block(struct jffs2_sb_info *c,
instr = kmalloc(sizeof(struct erase_info) + sizeof(struct erase_priv_struct), GFP_KERNEL);
if (!instr) {
printk(KERN_WARNING "kmalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later\n");
+ down(&c->erase_free_sem);
spin_lock(&c->erase_completion_lock);
list_move(&jeb->list, &c->erase_pending_list);
c->erasing_size -= c->sector_size;
c->dirty_size += c->sector_size;
jeb->dirty_size = c->sector_size;
spin_unlock(&c->erase_completion_lock);
+ up(&c->erase_free_sem);
return;
}
@@ -82,12 +84,14 @@ static void jffs2_erase_block(struct jffs2_sb_info *c,
if (ret == -ENOMEM || ret == -EAGAIN) {
/* Erase failed immediately. Refile it on the list */
D1(printk(KERN_DEBUG "Erase at 0x%08x failed: %d. Refiling on erase_pending_list\n", jeb->offset, ret));
+ down(&c->erase_free_sem);
spin_lock(&c->erase_completion_lock);
list_move(&jeb->list, &c->erase_pending_list);
c->erasing_size -= c->sector_size;
c->dirty_size += c->sector_size;
jeb->dirty_size = c->sector_size;
spin_unlock(&c->erase_completion_lock);
+ up(&c->erase_free_sem);
return;
}
@@ -114,6 +118,7 @@ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count)
jeb = list_entry(c->erase_complete_list.next, struct jffs2_eraseblock, list);
list_del(&jeb->list);
spin_unlock(&c->erase_completion_lock);
+ up(&c->erase_free_sem);
jffs2_mark_erased_block(c, jeb);
if (!--count) {
@@ -134,6 +139,7 @@ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count)
jffs2_free_jeb_node_refs(c, jeb);
list_add(&jeb->list, &c->erasing_list);
spin_unlock(&c->erase_completion_lock);
+ up(&c->erase_free_sem);
jffs2_erase_block(c, jeb);
@@ -142,23 +148,25 @@ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count)
}
/* Be nice */
- cond_resched();
+ yield();
+ down(&c->erase_free_sem);
spin_lock(&c->erase_completion_lock);
}
spin_unlock(&c->erase_completion_lock);
+ up(&c->erase_free_sem);
done:
D1(printk(KERN_DEBUG "jffs2_erase_pending_blocks completed\n"));
-
- up(&c->erase_free_sem);
}
static void jffs2_erase_succeeded(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb)
{
D1(printk(KERN_DEBUG "Erase completed successfully at 0x%08x\n", jeb->offset));
+ down(&c->erase_free_sem);
spin_lock(&c->erase_completion_lock);
list_move_tail(&jeb->list, &c->erase_complete_list);
spin_unlock(&c->erase_completion_lock);
+ up(&c->erase_free_sem);
/* Ensure that kupdated calls us again to mark them clean */
jffs2_erase_pending_trigger(c);
}
@@ -172,22 +180,26 @@ static void jffs2_erase_failed(struct jffs2_sb_info *c, struct jffs2_eraseblock
failed too many times. */
if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) {
/* We'd like to give this block another try. */
+ down(&c->erase_free_sem);
spin_lock(&c->erase_completion_lock);
list_move(&jeb->list, &c->erase_pending_list);
c->erasing_size -= c->sector_size;
c->dirty_size += c->sector_size;
jeb->dirty_size = c->sector_size;
spin_unlock(&c->erase_completion_lock);
+ up(&c->erase_free_sem);
return;
}
}
+ down(&c->erase_free_sem);
spin_lock(&c->erase_completion_lock);
c->erasing_size -= c->sector_size;
c->bad_size += c->sector_size;
list_move(&jeb->list, &c->bad_list);
c->nr_erasing_blocks--;
spin_unlock(&c->erase_completion_lock);
+ up(&c->erase_free_sem);
wake_up(&c->erase_wait);
}
@@ -317,6 +329,33 @@ static int jffs2_block_check_erase(struct jffs2_sb_info *c, struct jffs2_erasebl
size_t retlen;
int ret = -EIO;
+ if (c->mtd->point) {
+ unsigned long *wordebuf;
+
+ ret = c->mtd->point(c->mtd, jeb->offset, c->sector_size, &retlen, (unsigned char **)&ebuf);
+ if (ret) {
+ D1(printk(KERN_DEBUG "MTD point failed %d\n", ret));
+ goto do_flash_read;
+ }
+ if (retlen < c->sector_size) {
+ /* Don't muck about if it won't let us point to the whole erase sector */
+ D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", retlen));
+ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, retlen);
+ goto do_flash_read;
+ }
+ wordebuf = ebuf-sizeof(*wordebuf);
+ retlen /= sizeof(*wordebuf);
+ do {
+ if (*++wordebuf != ~0)
+ break;
+ } while(--retlen);
+ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size);
+ if (retlen)
+ printk(KERN_WARNING "Newly-erased block contained word 0x%lx at offset 0x%08tx\n",
+ *wordebuf, jeb->offset + c->sector_size-retlen*sizeof(*wordebuf));
+ return 0;
+ }
+ do_flash_read:
ebuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!ebuf) {
printk(KERN_WARNING "Failed to allocate page buffer for verifying erase at 0x%08x. Refiling\n", jeb->offset);
@@ -362,7 +401,7 @@ static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseb
{
size_t retlen;
int ret;
- uint32_t bad_offset;
+ uint32_t uninitialized_var(bad_offset);
switch (jffs2_block_check_erase(c, jeb, &bad_offset)) {
case -EAGAIN: goto refile;
@@ -417,6 +456,7 @@ static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseb
jffs2_link_node_ref(c, jeb, jeb->offset | REF_NORMAL, c->cleanmarker_size, NULL);
}
+ down(&c->erase_free_sem);
spin_lock(&c->erase_completion_lock);
c->erasing_size -= c->sector_size;
c->free_size += jeb->free_size;
@@ -429,23 +469,28 @@ static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseb
c->nr_erasing_blocks--;
c->nr_free_blocks++;
spin_unlock(&c->erase_completion_lock);
+ up(&c->erase_free_sem);
wake_up(&c->erase_wait);
return;
filebad:
+ down(&c->erase_free_sem);
spin_lock(&c->erase_completion_lock);
/* Stick it on a list (any list) so erase_failed can take it
right off again. Silly, but shouldn't happen often. */
list_add(&jeb->list, &c->erasing_list);
spin_unlock(&c->erase_completion_lock);
+ up(&c->erase_free_sem);
jffs2_erase_failed(c, jeb, bad_offset);
return;
refile:
/* Stick it back on the list from whence it came and come back later */
jffs2_erase_pending_trigger(c);
+ down(&c->erase_free_sem);
spin_lock(&c->erase_completion_lock);
list_add(&jeb->list, &c->erase_complete_list);
spin_unlock(&c->erase_completion_lock);
+ up(&c->erase_free_sem);
return;
}
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 8bc727b7169..ed85f9afdbc 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -24,7 +24,7 @@
static int jffs2_flash_setup(struct jffs2_sb_info *c);
-static int jffs2_do_setattr (struct inode *inode, struct iattr *iattr)
+int jffs2_do_setattr (struct inode *inode, struct iattr *iattr)
{
struct jffs2_full_dnode *old_metadata, *new_metadata;
struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
@@ -36,10 +36,8 @@ static int jffs2_do_setattr (struct inode *inode, struct iattr *iattr)
unsigned int ivalid;
uint32_t alloclen;
int ret;
+
D1(printk(KERN_DEBUG "jffs2_setattr(): ino #%lu\n", inode->i_ino));
- ret = inode_change_ok(inode, iattr);
- if (ret)
- return ret;
/* Special cases - we don't want more than one data node
for these types on the medium at any time. So setattr
@@ -183,9 +181,14 @@ int jffs2_setattr(struct dentry *dentry, struct iattr *iattr)
{
int rc;
+ rc = inode_change_ok(dentry->d_inode, iattr);
+ if (rc)
+ return rc;
+
rc = jffs2_do_setattr(dentry->d_inode, iattr);
if (!rc && (iattr->ia_valid & ATTR_MODE))
rc = jffs2_acl_chmod(dentry->d_inode);
+
return rc;
}
@@ -399,7 +402,8 @@ void jffs2_write_super (struct super_block *sb)
/* jffs2_new_inode: allocate a new inode and inocache, add it to the hash,
fill in the raw_inode while you're at it. */
-struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_inode *ri)
+struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_inode *ri,
+ struct posix_acl **acl)
{
struct inode *inode;
struct super_block *sb = dir_i->i_sb;
@@ -431,7 +435,23 @@ struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_i
} else {
ri->gid = cpu_to_je16(current->fsgid);
}
- ri->mode = cpu_to_jemode(mode);
+
+ /* POSIX ACLs have to be processed now, at least partly.
+ The umask is only applied if there's no default ACL */
+ if (!S_ISLNK(mode)) {
+ *acl = jffs2_get_acl(dir_i, ACL_TYPE_DEFAULT);
+ if (IS_ERR(*acl)) {
+ make_bad_inode(inode);
+ iput(inode);
+ inode = (void *)*acl;
+ *acl = NULL;
+ return inode;
+ }
+ if (!(*acl))
+ mode &= ~current->fs->umask;
+ } else {
+ *acl = NULL;
+ }
ret = jffs2_do_new_inode (c, f, mode, ri);
if (ret) {
make_bad_inode(inode);
diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c
index 2d99e06ab22..32ff0373aa0 100644
--- a/fs/jffs2/gc.c
+++ b/fs/jffs2/gc.c
@@ -122,6 +122,7 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
struct jffs2_inode_cache *ic;
struct jffs2_eraseblock *jeb;
struct jffs2_raw_node_ref *raw;
+ uint32_t gcblock_dirty;
int ret = 0, inum, nlink;
int xattr = 0;
@@ -236,6 +237,7 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
}
raw = jeb->gc_node;
+ gcblock_dirty = jeb->dirty_size;
while(ref_obsolete(raw)) {
D1(printk(KERN_DEBUG "Node at 0x%08x is obsolete... skipping\n", ref_offset(raw)));
@@ -282,7 +284,7 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
} else {
ret = jffs2_garbage_collect_xattr_ref(c, (struct jffs2_xattr_ref *)ic, raw);
}
- goto release_sem;
+ goto test_gcnode;
}
#endif
@@ -376,7 +378,7 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
if (ret != -EBADFD) {
spin_unlock(&c->inocache_lock);
- goto release_sem;
+ goto test_gcnode;
}
/* Fall through if it wanted us to, with inocache_lock held */
@@ -407,6 +409,12 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
jffs2_gc_release_inode(c, f);
+ test_gcnode:
+ if (jeb->dirty_size == gcblock_dirty && !ref_obsolete(jeb->gc_node)) {
+ /* Eep. This really should never happen. GC is broken */
+ printk(KERN_ERR "Error garbage collecting node at %08x!\n", ref_offset(jeb->gc_node));
+ ret = -ENOSPC;
+ }
release_sem:
up(&c->alloc_sem);
@@ -556,7 +564,7 @@ static int jffs2_garbage_collect_pristine(struct jffs2_sb_info *c,
node = kmalloc(rawlen, GFP_KERNEL);
if (!node)
- return -ENOMEM;
+ return -ENOMEM;
ret = jffs2_flash_read(c, ref_offset(raw), rawlen, &retlen, (char *)node);
if (!ret && retlen != rawlen)
@@ -598,10 +606,15 @@ static int jffs2_garbage_collect_pristine(struct jffs2_sb_info *c,
goto bail;
}
+ if (strnlen(node->d.name, node->d.nsize) != node->d.nsize) {
+ printk(KERN_WARNING "Name in dirent node at 0x%08x contains zeroes\n", ref_offset(raw));
+ goto bail;
+ }
+
if (node->d.nsize) {
crc = crc32(0, node->d.name, node->d.nsize);
if (je32_to_cpu(node->d.name_crc) != crc) {
- printk(KERN_WARNING "Name CRC failed on REF_PRISTINE dirent ode at 0x%08x: Read 0x%08x, calculated 0x%08x\n",
+ printk(KERN_WARNING "Name CRC failed on REF_PRISTINE dirent node at 0x%08x: Read 0x%08x, calculated 0x%08x\n",
ref_offset(raw), je32_to_cpu(node->d.name_crc), crc);
goto bail;
}
@@ -624,7 +637,7 @@ static int jffs2_garbage_collect_pristine(struct jffs2_sb_info *c,
if (ret || (retlen != rawlen)) {
printk(KERN_NOTICE "Write of %d bytes at 0x%08x failed. returned %d, retlen %zd\n",
- rawlen, phys_ofs, ret, retlen);
+ rawlen, phys_ofs, ret, retlen);
if (retlen) {
jffs2_add_physical_node_ref(c, phys_ofs | REF_OBSOLETE, rawlen, NULL);
} else {
diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h
index b13298a824e..3a2197f3c81 100644
--- a/fs/jffs2/jffs2_fs_sb.h
+++ b/fs/jffs2/jffs2_fs_sb.h
@@ -69,6 +69,8 @@ struct jffs2_sb_info {
uint8_t resv_blocks_gctrigger; /* ... wake up the GC thread */
uint8_t resv_blocks_gcbad; /* ... pick a block from the bad_list to GC */
uint8_t resv_blocks_gcmerge; /* ... merge pages when garbage collecting */
+ /* Number of 'very dirty' blocks before we trigger immediate GC */
+ uint8_t vdirty_blocks_gctrigger;
uint32_t nospc_dirty_size;
@@ -106,6 +108,9 @@ struct jffs2_sb_info {
uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+ unsigned char *wbuf_verify; /* read-back buffer for verification */
+#endif
#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
unsigned char *wbuf; /* Write-behind buffer for NAND flash */
uint32_t wbuf_ofs;
diff --git a/fs/jffs2/nodelist.h b/fs/jffs2/nodelist.h
index bc5509fe577..ec1aae9e695 100644
--- a/fs/jffs2/nodelist.h
+++ b/fs/jffs2/nodelist.h
@@ -127,7 +127,7 @@ static inline struct jffs2_inode_cache *jffs2_raw_ref_to_ic(struct jffs2_raw_nod
return ((struct jffs2_inode_cache *)raw);
}
- /* flash_offset & 3 always has to be zero, because nodes are
+ /* flash_offset & 3 always has to be zero, because nodes are
always aligned at 4 bytes. So we have a couple of extra bits
to play with, which indicate the node's status; see below: */
#define REF_UNCHECKED 0 /* We haven't yet checked the CRC or built its inode */
diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c
index dbc908ad622..a0313fa8748 100644
--- a/fs/jffs2/nodemgmt.c
+++ b/fs/jffs2/nodemgmt.c
@@ -154,7 +154,7 @@ int jffs2_reserve_space_gc(struct jffs2_sb_info *c, uint32_t minsize,
while(ret == -EAGAIN) {
ret = jffs2_do_reserve_space(c, minsize, len, sumsize);
if (ret) {
- D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret));
+ D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret));
}
}
spin_unlock(&c->erase_completion_lock);
@@ -423,7 +423,12 @@ struct jffs2_raw_node_ref *jffs2_add_physical_node_ref(struct jffs2_sb_info *c,
even after refiling c->nextblock */
if ((c->nextblock || ((ofs & 3) != REF_OBSOLETE))
&& (jeb != c->nextblock || (ofs & ~3) != jeb->offset + (c->sector_size - jeb->free_size))) {
- printk(KERN_WARNING "argh. node added in wrong place\n");
+ printk(KERN_WARNING "argh. node added in wrong place at 0x%08x(%d)\n", ofs & ~3, ofs & 3);
+ if (c->nextblock)
+ printk(KERN_WARNING "nextblock 0x%08x", c->nextblock->offset);
+ else
+ printk(KERN_WARNING "No nextblock");
+ printk(", expected at %08x\n", jeb->offset + (c->sector_size - jeb->free_size));
return ERR_PTR(-EINVAL);
}
#endif
@@ -717,6 +722,8 @@ int jffs2_thread_should_wake(struct jffs2_sb_info *c)
{
int ret = 0;
uint32_t dirty;
+ int nr_very_dirty = 0;
+ struct jffs2_eraseblock *jeb;
if (c->unchecked_size) {
D1(printk(KERN_DEBUG "jffs2_thread_should_wake(): unchecked_size %d, checked_ino #%d\n",
@@ -738,8 +745,18 @@ int jffs2_thread_should_wake(struct jffs2_sb_info *c)
(dirty > c->nospc_dirty_size))
ret = 1;
- D1(printk(KERN_DEBUG "jffs2_thread_should_wake(): nr_free_blocks %d, nr_erasing_blocks %d, dirty_size 0x%x: %s\n",
- c->nr_free_blocks, c->nr_erasing_blocks, c->dirty_size, ret?"yes":"no"));
+ list_for_each_entry(jeb, &c->very_dirty_list, list) {
+ nr_very_dirty++;
+ if (nr_very_dirty == c->vdirty_blocks_gctrigger) {
+ ret = 1;
+ /* In debug mode, actually go through and count them all */
+ D1(continue);
+ break;
+ }
+ }
+
+ D1(printk(KERN_DEBUG "jffs2_thread_should_wake(): nr_free_blocks %d, nr_erasing_blocks %d, dirty_size 0x%x, vdirty_blocks %d: %s\n",
+ c->nr_free_blocks, c->nr_erasing_blocks, c->dirty_size, nr_very_dirty, ret?"yes":"no"));
return ret;
}
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 80daea96bbc..f6743a915cf 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -173,12 +173,15 @@ int jffs2_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
extern const struct inode_operations jffs2_symlink_inode_operations;
/* fs.c */
+struct posix_acl;
+
int jffs2_setattr (struct dentry *, struct iattr *);
+int jffs2_do_setattr (struct inode *, struct iattr *);
void jffs2_read_inode (struct inode *);
void jffs2_clear_inode (struct inode *);
void jffs2_dirty_inode(struct inode *inode);
struct inode *jffs2_new_inode (struct inode *dir_i, int mode,
- struct jffs2_raw_inode *ri);
+ struct jffs2_raw_inode *ri, struct posix_acl **acl);
int jffs2_statfs (struct dentry *, struct kstatfs *);
void jffs2_write_super (struct super_block *);
int jffs2_remount_fs (struct super_block *, int *, char *);
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index b5baa356fed..2eae5d2dbeb 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -65,7 +65,7 @@ static int check_node_data(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info
err = c->mtd->point(c->mtd, ofs, len, &retlen, &buffer);
if (!err && retlen < tn->csize) {
JFFS2_WARNING("MTD point returned len too short: %zu instead of %u.\n", retlen, tn->csize);
- c->mtd->unpoint(c->mtd, buffer, ofs, len);
+ c->mtd->unpoint(c->mtd, buffer, ofs, retlen);
} else if (err)
JFFS2_WARNING("MTD point failed: error code %d.\n", err);
else
@@ -211,7 +211,7 @@ static void jffs2_kill_tn(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info *
* ordering.
*
* Returns 0 if the node was handled (including marking it obsolete)
- * < 0 an if error occurred
+ * < 0 an if error occurred
*/
static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c,
struct jffs2_readinode_info *rii,
@@ -862,8 +862,8 @@ static inline int read_unknown(struct jffs2_sb_info *c, struct jffs2_raw_node_re
JFFS2_ERROR("REF_UNCHECKED but unknown node at %#08x\n",
ref_offset(ref));
JFFS2_ERROR("Node is {%04x,%04x,%08x,%08x}. Please report this error.\n",
- je16_to_cpu(un->magic), je16_to_cpu(un->nodetype),
- je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc));
+ je16_to_cpu(un->magic), je16_to_cpu(un->nodetype),
+ je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc));
jffs2_mark_node_obsolete(c, ref);
return 0;
}
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 6c75cd43334..272872d27fd 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -101,7 +101,7 @@ int jffs2_scan_medium(struct jffs2_sb_info *c)
if (!ret && pointlen < c->mtd->size) {
/* Don't muck about if it won't let us point to the whole flash */
D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", pointlen));
- c->mtd->unpoint(c->mtd, flashbuf, 0, c->mtd->size);
+ c->mtd->unpoint(c->mtd, flashbuf, 0, pointlen);
flashbuf = NULL;
}
if (ret)
@@ -863,7 +863,7 @@ scan_more:
switch (je16_to_cpu(node->nodetype) & JFFS2_COMPAT_MASK) {
case JFFS2_FEATURE_ROCOMPAT:
printk(KERN_NOTICE "Read-only compatible feature node (0x%04x) found at offset 0x%08x\n", je16_to_cpu(node->nodetype), ofs);
- c->flags |= JFFS2_SB_FLAG_RO;
+ c->flags |= JFFS2_SB_FLAG_RO;
if (!(jffs2_is_readonly(c)))
return -EROFS;
if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen)))))
@@ -1004,6 +1004,7 @@ static int jffs2_scan_dirent_node(struct jffs2_sb_info *c, struct jffs2_eraseblo
{
struct jffs2_full_dirent *fd;
struct jffs2_inode_cache *ic;
+ uint32_t checkedlen;
uint32_t crc;
int err;
@@ -1024,12 +1025,18 @@ static int jffs2_scan_dirent_node(struct jffs2_sb_info *c, struct jffs2_eraseblo
pseudo_random += je32_to_cpu(rd->version);
- fd = jffs2_alloc_full_dirent(rd->nsize+1);
+ /* Should never happen. Did. (OLPC trac #4184)*/
+ checkedlen = strnlen(rd->name, rd->nsize);
+ if (checkedlen < rd->nsize) {
+ printk(KERN_ERR "Dirent at %08x has zeroes in name. Truncating to %d chars\n",
+ ofs, checkedlen);
+ }
+ fd = jffs2_alloc_full_dirent(checkedlen+1);
if (!fd) {
return -ENOMEM;
}
- memcpy(&fd->name, rd->name, rd->nsize);
- fd->name[rd->nsize] = 0;
+ memcpy(&fd->name, rd->name, checkedlen);
+ fd->name[checkedlen] = 0;
crc = crc32(0, fd->name, rd->nsize);
if (crc != je32_to_cpu(rd->name_crc)) {
@@ -1055,7 +1062,7 @@ static int jffs2_scan_dirent_node(struct jffs2_sb_info *c, struct jffs2_eraseblo
fd->next = NULL;
fd->version = je32_to_cpu(rd->version);
fd->ino = je32_to_cpu(rd->ino);
- fd->nhash = full_name_hash(fd->name, rd->nsize);
+ fd->nhash = full_name_hash(fd->name, checkedlen);
fd->type = rd->type;
jffs2_add_fd_to_list(c, fd, &ic->scan_dents);
diff --git a/fs/jffs2/security.c b/fs/jffs2/security.c
index bc9f6ba1082..02c39c64ecb 100644
--- a/fs/jffs2/security.c
+++ b/fs/jffs2/security.c
@@ -38,9 +38,9 @@ int jffs2_init_security(struct inode *inode, struct inode *dir)
}
rc = do_jffs2_setxattr(inode, JFFS2_XPREFIX_SECURITY, name, value, len, 0);
- kfree(name);
- kfree(value);
- return rc;
+ kfree(name);
+ kfree(value);
+ return rc;
}
/* ---- XATTR Handler for "security.*" ----------------- */
diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c
index d828b296392..629af01e5ad 100644
--- a/fs/jffs2/summary.c
+++ b/fs/jffs2/summary.c
@@ -2,10 +2,10 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
- * Zoltan Sogor <weth@inf.u-szeged.hu>,
- * Patrik Kluba <pajko@halom.u-szeged.hu>,
- * University of Szeged, Hungary
- * 2006 KaiGai Kohei <kaigai@ak.jp.nec.com>
+ * Zoltan Sogor <weth@inf.u-szeged.hu>,
+ * Patrik Kluba <pajko@halom.u-szeged.hu>,
+ * University of Szeged, Hungary
+ * 2006 KaiGai Kohei <kaigai@ak.jp.nec.com>
*
* For licensing information, see the file 'LICENCE' in this directory.
*
@@ -429,6 +429,7 @@ static int jffs2_sum_process_sum_data(struct jffs2_sb_info *c, struct jffs2_eras
case JFFS2_NODETYPE_DIRENT: {
struct jffs2_sum_dirent_flash *spd;
+ int checkedlen;
spd = sp;
dbg_summary("Dirent at 0x%08x-0x%08x\n",
@@ -436,12 +437,25 @@ static int jffs2_sum_process_sum_data(struct jffs2_sb_info *c, struct jffs2_eras
jeb->offset + je32_to_cpu(spd->offset) + je32_to_cpu(spd->totlen));
- fd = jffs2_alloc_full_dirent(spd->nsize+1);
+ /* This should never happen, but https://dev.laptop.org/ticket/4184 */
+ checkedlen = strnlen(spd->name, spd->nsize);
+ if (!checkedlen) {
+ printk(KERN_ERR "Dirent at %08x has zero at start of name. Aborting mount.\n",
+ jeb->offset + je32_to_cpu(spd->offset));
+ return -EIO;
+ }
+ if (checkedlen < spd->nsize) {
+ printk(KERN_ERR "Dirent at %08x has zeroes in name. Truncating to %d chars\n",
+ jeb->offset + je32_to_cpu(spd->offset), checkedlen);
+ }
+
+
+ fd = jffs2_alloc_full_dirent(checkedlen+1);
if (!fd)
return -ENOMEM;
- memcpy(&fd->name, spd->name, spd->nsize);
- fd->name[spd->nsize] = 0;
+ memcpy(&fd->name, spd->name, checkedlen);
+ fd->name[checkedlen] = 0;
ic = jffs2_scan_make_ino_cache(c, je32_to_cpu(spd->pino));
if (!ic) {
@@ -455,7 +469,7 @@ static int jffs2_sum_process_sum_data(struct jffs2_sb_info *c, struct jffs2_eras
fd->next = NULL;
fd->version = je32_to_cpu(spd->version);
fd->ino = je32_to_cpu(spd->ino);
- fd->nhash = full_name_hash(fd->name, spd->nsize);
+ fd->nhash = full_name_hash(fd->name, checkedlen);
fd->type = spd->type;
jffs2_add_fd_to_list(c, fd, &ic->scan_dents);
diff --git a/fs/jffs2/summary.h b/fs/jffs2/summary.h
index 0c6669e2139..8bf34f2fa5c 100644
--- a/fs/jffs2/summary.h
+++ b/fs/jffs2/summary.h
@@ -2,9 +2,9 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
- * Zoltan Sogor <weth@inf.u-szeged.hu>,
- * Patrik Kluba <pajko@halom.u-szeged.hu>,
- * University of Szeged, Hungary
+ * Zoltan Sogor <weth@inf.u-szeged.hu>,
+ * Patrik Kluba <pajko@halom.u-szeged.hu>,
+ * University of Szeged, Hungary
*
* For licensing information, see the file 'LICENCE' in this directory.
*
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 91d1d0f1c66..d1d4f27464b 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -220,6 +220,47 @@ static struct jffs2_raw_node_ref **jffs2_incore_replace_raw(struct jffs2_sb_info
return NULL;
}
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf,
+ uint32_t ofs)
+{
+ int ret;
+ size_t retlen;
+ char *eccstr;
+
+ ret = c->mtd->read(c->mtd, ofs, c->wbuf_pagesize, &retlen, c->wbuf_verify);
+ if (ret && ret != -EUCLEAN && ret != -EBADMSG) {
+ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x failed: %d\n", c->wbuf_ofs, ret);
+ return ret;
+ } else if (retlen != c->wbuf_pagesize) {
+ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x gave short read: %zd not %d.\n", ofs, retlen, c->wbuf_pagesize);
+ return -EIO;
+ }
+ if (!memcmp(buf, c->wbuf_verify, c->wbuf_pagesize))
+ return 0;
+
+ if (ret == -EUCLEAN)
+ eccstr = "corrected";
+ else if (ret == -EBADMSG)
+ eccstr = "correction failed";
+ else
+ eccstr = "OK or unused";
+
+ printk(KERN_WARNING "Write verify error (ECC %s) at %08x. Wrote:\n",
+ eccstr, c->wbuf_ofs);
+ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
+ c->wbuf, c->wbuf_pagesize, 0);
+
+ printk(KERN_WARNING "Read back:\n");
+ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
+ c->wbuf_verify, c->wbuf_pagesize, 0);
+
+ return -EIO;
+}
+#else
+#define jffs2_verify_write(c,b,o) (0)
+#endif
+
/* Recover from failure to write wbuf. Recover the nodes up to the
* wbuf, not the one which we were starting to try to write. */
@@ -380,7 +421,7 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
ret = c->mtd->write(c->mtd, ofs, towrite, &retlen,
rewrite_buf);
- if (ret || retlen != towrite) {
+ if (ret || retlen != towrite || jffs2_verify_write(c, rewrite_buf, ofs)) {
/* Argh. We tried. Really we did. */
printk(KERN_CRIT "Recovery of wbuf failed due to a second write error\n");
kfree(buf);
@@ -587,15 +628,16 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
ret = c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf);
- if (ret || retlen != c->wbuf_pagesize) {
- if (ret)
- printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n",ret);
- else {
- printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n",
- retlen, c->wbuf_pagesize);
- ret = -EIO;
- }
-
+ if (ret) {
+ printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n", ret);
+ goto wfail;
+ } else if (retlen != c->wbuf_pagesize) {
+ printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n",
+ retlen, c->wbuf_pagesize);
+ ret = -EIO;
+ goto wfail;
+ } else if ((ret = jffs2_verify_write(c, c->wbuf, c->wbuf_ofs))) {
+ wfail:
jffs2_wbuf_recover(c);
return ret;
@@ -966,8 +1008,8 @@ exit:
#define NR_OOB_SCAN_PAGES 4
-/* For historical reasons we use only 12 bytes for OOB clean marker */
-#define OOB_CM_SIZE 12
+/* For historical reasons we use only 8 bytes for OOB clean marker */
+#define OOB_CM_SIZE 8
static const struct jffs2_unknown_node oob_cleanmarker =
{
@@ -1021,8 +1063,8 @@ int jffs2_check_oob_empty(struct jffs2_sb_info *c,
/*
* Check for a valid cleanmarker.
* Returns: 0 if a valid cleanmarker was found
- * 1 if no cleanmarker was found
- * negative error code if an error occurred
+ * 1 if no cleanmarker was found
+ * negative error code if an error occurred
*/
int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c,
struct jffs2_eraseblock *jeb)
@@ -1138,11 +1180,22 @@ int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
return -ENOMEM;
}
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+ c->wbuf_verify = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
+ if (!c->wbuf_verify) {
+ kfree(c->oobbuf);
+ kfree(c->wbuf);
+ return -ENOMEM;
+ }
+#endif
return 0;
}
void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c)
{
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+ kfree(c->wbuf_verify);
+#endif
kfree(c->wbuf);
kfree(c->oobbuf);
}
diff --git a/fs/jffs2/write.c b/fs/jffs2/write.c
index 664c164aa67..2f5695446d0 100644
--- a/fs/jffs2/write.c
+++ b/fs/jffs2/write.c
@@ -215,6 +215,17 @@ struct jffs2_full_dirent *jffs2_write_dirent(struct jffs2_sb_info *c, struct jff
BUG();
});
+ if (strnlen(name, namelen) != namelen) {
+ /* This should never happen, but seems to have done on at least one
+ occasion: https://dev.laptop.org/ticket/4184 */
+ printk(KERN_CRIT "Error in jffs2_write_dirent() -- name contains zero bytes!\n");
+ printk(KERN_CRIT "Directory inode #%u, name at *0x%p \"%s\"->ino #%u, name_crc 0x%08x\n",
+ je32_to_cpu(rd->pino), name, name, je32_to_cpu(rd->ino),
+ je32_to_cpu(rd->name_crc));
+ WARN_ON(1);
+ return ERR_PTR(-EIO);
+ }
+
vecs[0].iov_base = rd;
vecs[0].iov_len = sizeof(*rd);
vecs[1].iov_base = (unsigned char *)name;
@@ -226,7 +237,7 @@ struct jffs2_full_dirent *jffs2_write_dirent(struct jffs2_sb_info *c, struct jff
fd->version = je32_to_cpu(rd->version);
fd->ino = je32_to_cpu(rd->ino);
- fd->nhash = full_name_hash(name, strlen(name));
+ fd->nhash = full_name_hash(name, namelen);
fd->type = rd->type;
memcpy(fd->name, name, namelen);
fd->name[namelen]=0;
diff --git a/fs/jffs2/xattr.h b/fs/jffs2/xattr.h
index 3b0ff292593..6e3b5ddfb7a 100644
--- a/fs/jffs2/xattr.h
+++ b/fs/jffs2/xattr.h
@@ -75,7 +75,7 @@ extern void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c);
extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c);
extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
- uint32_t xid, uint32_t version);
+ uint32_t xid, uint32_t version);
extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
diff --git a/fs/jffs2/xattr_user.c b/fs/jffs2/xattr_user.c
index 40942bc516b..8bbeab90ada 100644
--- a/fs/jffs2/xattr_user.c
+++ b/fs/jffs2/xattr_user.c
@@ -17,7 +17,7 @@
#include "nodelist.h"
static int jffs2_user_getxattr(struct inode *inode, const char *name,
- void *buffer, size_t size)
+ void *buffer, size_t size)
{
if (!strcmp(name, ""))
return -EINVAL;
@@ -25,7 +25,7 @@ static int jffs2_user_getxattr(struct inode *inode, const char *name,
}
static int jffs2_user_setxattr(struct inode *inode, const char *name, const void *buffer,
- size_t size, int flags)
+ size_t size, int flags)
{
if (!strcmp(name, ""))
return -EINVAL;
diff --git a/include/asm-blackfin/mach-bf548/dma.h b/include/asm-blackfin/mach-bf548/dma.h
index fcc8b4c34c6..14cb10cc24a 100644
--- a/include/asm-blackfin/mach-bf548/dma.h
+++ b/include/asm-blackfin/mach-bf548/dma.h
@@ -55,6 +55,7 @@
#define CH_SPORT3_RX 20
#define CH_SPORT3_TX 21
#define CH_SDH 22
+#define CH_NFC 22
#define CH_SPI2 23
#define CH_MEM_STREAM0_DEST 24
diff --git a/include/asm-blackfin/nand.h b/include/asm-blackfin/nand.h
new file mode 100644
index 00000000000..afbaafa793f
--- /dev/null
+++ b/include/asm-blackfin/nand.h
@@ -0,0 +1,47 @@
+/* linux/include/asm-blackfin/nand.h
+ *
+ * Copyright (c) 2007 Analog Devices, Inc.
+ * Bryan Wu <bryan.wu@analog.com>
+ *
+ * BF5XX - NAND flash controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* struct bf5xx_nand_platform
+ *
+ * define a interface between platfrom board specific code and
+ * bf54x NFC driver.
+ *
+ * nr_partitions = number of partitions pointed to be partitoons (or zero)
+ * partitions = mtd partition list
+ */
+
+#define NFC_PG_SIZE_256 0
+#define NFC_PG_SIZE_512 1
+#define NFC_PG_SIZE_OFFSET 9
+
+#define NFC_NWIDTH_8 0
+#define NFC_NWIDTH_16 1
+#define NFC_NWIDTH_OFFSET 8
+
+#define NFC_RDDLY_OFFSET 4
+#define NFC_WRDLY_OFFSET 0
+
+#define NFC_STAT_NBUSY 1
+
+struct bf5xx_nand_platform {
+ /* NAND chip information */
+ unsigned short page_size;
+ unsigned short data_width;
+
+ /* RD/WR strobe delay timing information, all times in SCLK cycles */
+ unsigned short rd_dly;
+ unsigned short wr_dly;
+
+ /* NAND MTD partition information */
+ int nr_partitions;
+ struct mtd_partition *partitions;
+};
diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
index 840631fa5ff..6b563cae23d 100644
--- a/include/linux/jffs2.h
+++ b/include/linux/jffs2.h
@@ -46,6 +46,7 @@
#define JFFS2_COMPR_COPY 0x04
#define JFFS2_COMPR_DYNRUBIN 0x05
#define JFFS2_COMPR_ZLIB 0x06
+#define JFFS2_COMPR_LZO 0x07
/* Compatibility flags. */
#define JFFS2_COMPAT_MASK 0xc000 /* What do to if an unknown nodetype is found */
#define JFFS2_NODE_ACCURATE 0x2000
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index 123948b1454..e17c5343cf5 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -57,6 +57,15 @@
#define cfi_interleave_is_8(cfi) (0)
#endif
+#ifndef cfi_interleave
+#warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work.
+static inline int cfi_interleave(void *cfi)
+{
+ BUG();
+ return 0;
+}
+#endif
+
static inline int cfi_interleave_supported(int i)
{
switch (i) {
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
index a293a3b78e0..39e7d2a1be9 100644
--- a/include/linux/mtd/flashchip.h
+++ b/include/linux/mtd/flashchip.h
@@ -40,6 +40,7 @@ typedef enum {
FL_POINT,
FL_XIP_WHILE_ERASING,
FL_XIP_WHILE_WRITING,
+ FL_SHUTDOWN,
FL_UNKNOWN
} flstate_t;
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index 81f3a314dd7..a9fae032ba8 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -125,7 +125,15 @@
#endif
#ifndef map_bankwidth
-#error "No bus width supported. What's the point?"
+#warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work"
+static inline int map_bankwidth(void *map)
+{
+ BUG();
+ return 0;
+}
+#define map_bankwidth_is_large(map) (0)
+#define map_words(map) (0)
+#define MAX_MAP_BANKWIDTH 1
#endif
static inline int map_bankwidth_supported(int w)
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index fd64ccfbce0..783fc983417 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -133,6 +133,13 @@ struct mtd_info {
int numeraseregions;
struct mtd_erase_region_info *eraseregions;
+ /*
+ * Erase is an asynchronous operation. Device drivers are supposed
+ * to call instr->callback() whenever the operation completes, even
+ * if it completes with a failure.
+ * Callers are supposed to pass a callback function and wait for it
+ * to be called before writing to the block.
+ */
int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
/* This stuff for eXecute-In-Place */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index d2365c8dcac..c42bc7f533a 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -432,6 +432,7 @@ struct nand_chip {
#define NAND_MFR_STMICRO 0x20
#define NAND_MFR_HYNIX 0xad
#define NAND_MFR_MICRON 0x2c
+#define NAND_MFR_AMD 0x01
/**
* struct nand_flash_dev - NAND Flash Device ID Structure
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index a56d24ada50..fd0a260e070 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -60,6 +60,7 @@ struct onenand_bufferram {
* @erase_shift: [INTERN] number of address bits in a block
* @page_shift: [INTERN] number of address bits in a page
* @page_mask: [INTERN] a page per block mask
+ * @writesize: [INTERN] a real page size
* @bufferram_index: [INTERN] BufferRAM index
* @bufferram: [INTERN] BufferRAM info
* @readw: [REPLACEABLE] hardware specific function for read short
@@ -100,6 +101,7 @@ struct onenand_chip {
unsigned int erase_shift;
unsigned int page_shift;
unsigned int page_mask;
+ unsigned int writesize;
unsigned int bufferram_index;
struct onenand_bufferram bufferram[MAX_BUFFERRAM];
@@ -140,6 +142,8 @@ struct onenand_chip {
#define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1)
#define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1)
#define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1)
+#define ONENAND_SET_BUFFERRAM0(this) (this->bufferram_index = 0)
+#define ONENAND_SET_BUFFERRAM1(this) (this->bufferram_index = 1)
#define ONENAND_GET_SYS_CFG1(this) \
(this->read_word(this->base + ONENAND_REG_SYS_CFG1))
@@ -149,6 +153,13 @@ struct onenand_chip {
#define ONENAND_IS_DDP(this) \
(this->device_id & ONENAND_DEVICE_IS_DDP)
+#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM
+#define ONENAND_IS_2PLANE(this) \
+ (this->options & ONENAND_HAS_2PLANE)
+#else
+#define ONENAND_IS_2PLANE(this) (0)
+#endif
+
/* Check byte access in OneNAND */
#define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1)
@@ -157,6 +168,7 @@ struct onenand_chip {
*/
#define ONENAND_HAS_CONT_LOCK (0x0001)
#define ONENAND_HAS_UNLOCK_ALL (0x0002)
+#define ONENAND_HAS_2PLANE (0x0004)
#define ONENAND_PAGEBUF_ALLOC (0x1000)
#define ONENAND_OOBBUF_ALLOC (0x2000)
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
index af94719890e..c46161f4eee 100644
--- a/include/linux/mtd/onenand_regs.h
+++ b/include/linux/mtd/onenand_regs.h
@@ -74,6 +74,8 @@
#define ONENAND_DEVICE_DENSITY_512Mb (0x002)
#define ONENAND_DEVICE_DENSITY_1Gb (0x003)
+#define ONENAND_DEVICE_DENSITY_2Gb (0x004)
+#define ONENAND_DEVICE_DENSITY_4Gb (0x005)
/*
* Version ID Register F002h (R)
@@ -111,6 +113,8 @@
#define ONENAND_CMD_READOOB (0x13)
#define ONENAND_CMD_PROG (0x80)
#define ONENAND_CMD_PROGOOB (0x1A)
+#define ONENAND_CMD_2X_PROG (0x7D)
+#define ONENAND_CMD_2X_CACHE_PROG (0x7F)
#define ONENAND_CMD_UNLOCK (0x23)
#define ONENAND_CMD_LOCK (0x2A)
#define ONENAND_CMD_LOCK_TIGHT (0x2C)