aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/i386/kernel/vmlinux.lds.S7
-rw-r--r--drivers/base/power/Makefile1
-rw-r--r--drivers/base/power/trace.c228
-rw-r--r--include/asm-generic/rtc.h7
-rw-r--r--include/linux/resume-trace.h30
-rw-r--r--kernel/power/Kconfig9
6 files changed, 279 insertions, 3 deletions
diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S
index 8831303a473..7512f39c9f2 100644
--- a/arch/i386/kernel/vmlinux.lds.S
+++ b/arch/i386/kernel/vmlinux.lds.S
@@ -37,6 +37,13 @@ SECTIONS
RODATA
+ . = ALIGN(4);
+ __tracedata_start = .;
+ .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
+ *(.tracedata)
+ }
+ __tracedata_end = .;
+
/* writeable */
.data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
*(.data)
diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index ceeeba2c56c..91f230939c1 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -1,5 +1,6 @@
obj-y := shutdown.o
obj-$(CONFIG_PM) += main.o suspend.o resume.o runtime.o sysfs.o
+obj-$(CONFIG_PM_TRACE) += trace.o
ifeq ($(CONFIG_DEBUG_DRIVER),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c
new file mode 100644
index 00000000000..a9ab30fefff
--- /dev/null
+++ b/drivers/base/power/trace.c
@@ -0,0 +1,228 @@
+/*
+ * drivers/base/power/trace.c
+ *
+ * Copyright (C) 2006 Linus Torvalds
+ *
+ * Trace facility for suspend/resume problems, when none of the
+ * devices may be working.
+ */
+
+#include <linux/resume-trace.h>
+#include <linux/rtc.h>
+
+#include <asm/rtc.h>
+
+#include "power.h"
+
+/*
+ * Horrid, horrid, horrid.
+ *
+ * It turns out that the _only_ piece of hardware that actually
+ * keeps its value across a hard boot (and, more importantly, the
+ * POST init sequence) is literally the realtime clock.
+ *
+ * Never mind that an RTC chip has 114 bytes (and often a whole
+ * other bank of an additional 128 bytes) of nice SRAM that is
+ * _designed_ to keep data - the POST will clear it. So we literally
+ * can just use the few bytes of actual time data, which means that
+ * we're really limited.
+ *
+ * It means, for example, that we can't use the seconds at all
+ * (since the time between the hang and the boot might be more
+ * than a minute), and we'd better not depend on the low bits of
+ * the minutes either.
+ *
+ * There are the wday fields etc, but I wouldn't guarantee those
+ * are dependable either. And if the date isn't valid, either the
+ * hw or POST will do strange things.
+ *
+ * So we're left with:
+ * - year: 0-99
+ * - month: 0-11
+ * - day-of-month: 1-28
+ * - hour: 0-23
+ * - min: (0-30)*2
+ *
+ * Giving us a total range of 0-16128000 (0xf61800), ie less
+ * than 24 bits of actual data we can save across reboots.
+ *
+ * And if your box can't boot in less than three minutes,
+ * you're screwed.
+ *
+ * Now, almost 24 bits of data is pitifully small, so we need
+ * to be pretty dense if we want to use it for anything nice.
+ * What we do is that instead of saving off nice readable info,
+ * we save off _hashes_ of information that we can hopefully
+ * regenerate after the reboot.
+ *
+ * In particular, this means that we might be unlucky, and hit
+ * a case where we have a hash collision, and we end up not
+ * being able to tell for certain exactly which case happened.
+ * But that's hopefully unlikely.
+ *
+ * What we do is to take the bits we can fit, and split them
+ * into three parts (16*997*1009 = 16095568), and use the values
+ * for:
+ * - 0-15: user-settable
+ * - 0-996: file + line number
+ * - 0-1008: device
+ */
+#define USERHASH (16)
+#define FILEHASH (997)
+#define DEVHASH (1009)
+
+#define DEVSEED (7919)
+
+static unsigned int dev_hash_value;
+
+static int set_magic_time(unsigned int user, unsigned int file, unsigned int device)
+{
+ unsigned int n = user + USERHASH*(file + FILEHASH*device);
+
+ // June 7th, 2006
+ static struct rtc_time time = {
+ .tm_sec = 0,
+ .tm_min = 0,
+ .tm_hour = 0,
+ .tm_mday = 7,
+ .tm_mon = 5, // June - counting from zero
+ .tm_year = 106,
+ .tm_wday = 3,
+ .tm_yday = 160,
+ .tm_isdst = 1
+ };
+
+ time.tm_year = (n % 100);
+ n /= 100;
+ time.tm_mon = (n % 12);
+ n /= 12;
+ time.tm_mday = (n % 28) + 1;
+ n /= 28;
+ time.tm_hour = (n % 24);
+ n /= 24;
+ time.tm_min = (n % 20) * 3;
+ n /= 20;
+ set_rtc_time(&time);
+ return n ? -1 : 0;
+}
+
+static unsigned int read_magic_time(void)
+{
+ struct rtc_time time;
+ unsigned int val;
+
+ get_rtc_time(&time);
+ printk("Time: %2d:%02d:%02d Date: %02d/%02d/%02d\n",
+ time.tm_hour, time.tm_min, time.tm_sec,
+ time.tm_mon, time.tm_mday, time.tm_year);
+ val = time.tm_year; /* 100 years */
+ if (val > 100)
+ val -= 100;
+ val += time.tm_mon * 100; /* 12 months */
+ val += (time.tm_mday-1) * 100 * 12; /* 28 month-days */
+ val += time.tm_hour * 100 * 12 * 28; /* 24 hours */
+ val += (time.tm_min / 3) * 100 * 12 * 28 * 24; /* 20 3-minute intervals */
+ return val;
+}
+
+/*
+ * This is just the sdbm hash function with a user-supplied
+ * seed and final size parameter.
+ */
+static unsigned int hash_string(unsigned int seed, const char *data, unsigned int mod)
+{
+ unsigned char c;
+ while ((c = *data++) != 0) {
+ seed = (seed << 16) + (seed << 6) - seed + c;
+ }
+ return seed % mod;
+}
+
+void set_trace_device(struct device *dev)
+{
+ dev_hash_value = hash_string(DEVSEED, dev->bus_id, DEVHASH);
+}
+
+/*
+ * We could just take the "tracedata" index into the .tracedata
+ * section instead. Generating a hash of the data gives us a
+ * chance to work across kernel versions, and perhaps more
+ * importantly it also gives us valid/invalid check (ie we will
+ * likely not give totally bogus reports - if the hash matches,
+ * it's not any guarantee, but it's a high _likelihood_ that
+ * the match is valid).
+ */
+void generate_resume_trace(void *tracedata, unsigned int user)
+{
+ unsigned short lineno = *(unsigned short *)tracedata;
+ const char *file = *(const char **)(tracedata + 2);
+ unsigned int user_hash_value, file_hash_value;
+
+ user_hash_value = user % USERHASH;
+ file_hash_value = hash_string(lineno, file, FILEHASH);
+ set_magic_time(user_hash_value, file_hash_value, dev_hash_value);
+}
+
+extern char __tracedata_start, __tracedata_end;
+static int show_file_hash(unsigned int value)
+{
+ int match;
+ char *tracedata;
+
+ match = 0;
+ for (tracedata = &__tracedata_start ; tracedata < &__tracedata_end ; tracedata += 6) {
+ unsigned short lineno = *(unsigned short *)tracedata;
+ const char *file = *(const char **)(tracedata + 2);
+ unsigned int hash = hash_string(lineno, file, FILEHASH);
+ if (hash != value)
+ continue;
+ printk(" hash matches %s:%u\n", file, lineno);
+ match++;
+ }
+ return match;
+}
+
+static int show_dev_hash(unsigned int value)
+{
+ int match = 0;
+ struct list_head * entry = dpm_active.prev;
+
+ while (entry != &dpm_active) {
+ struct device * dev = to_device(entry);
+ unsigned int hash = hash_string(DEVSEED, dev->bus_id, DEVHASH);
+ if (hash == value) {
+ printk(" hash matches device %s\n", dev->bus_id);
+ match++;
+ }
+ entry = entry->prev;
+ }
+ return match;
+}
+
+static unsigned int hash_value_early_read;
+
+static int early_resume_init(void)
+{
+ hash_value_early_read = read_magic_time();
+ return 0;
+}
+
+static int late_resume_init(void)
+{
+ unsigned int val = hash_value_early_read;
+ unsigned int user, file, dev;
+
+ user = val % USERHASH;
+ val = val / USERHASH;
+ file = val % FILEHASH;
+ val = val / FILEHASH;
+ dev = val /* % DEVHASH */;
+
+ printk(" Magic number: %d:%d:%d\n", user, file, dev);
+ show_file_hash(file);
+ show_dev_hash(dev);
+ return 0;
+}
+
+core_initcall(early_resume_init);
+late_initcall(late_resume_init);
diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h
index cef08db34ad..4087037a422 100644
--- a/include/asm-generic/rtc.h
+++ b/include/asm-generic/rtc.h
@@ -114,6 +114,7 @@ static inline unsigned int get_rtc_time(struct rtc_time *time)
/* Set the current date and time in the real time clock. */
static inline int set_rtc_time(struct rtc_time *time)
{
+ unsigned long flags;
unsigned char mon, day, hrs, min, sec;
unsigned char save_control, save_freq_select;
unsigned int yrs;
@@ -131,7 +132,7 @@ static inline int set_rtc_time(struct rtc_time *time)
if (yrs > 255) /* They are unsigned */
return -EINVAL;
- spin_lock_irq(&rtc_lock);
+ spin_lock_irqsave(&rtc_lock, flags);
#ifdef CONFIG_MACH_DECSTATION
real_yrs = yrs;
leap_yr = ((!((yrs + 1900) % 4) && ((yrs + 1900) % 100)) ||
@@ -152,7 +153,7 @@ static inline int set_rtc_time(struct rtc_time *time)
* whether the chip is in binary mode or not.
*/
if (yrs > 169) {
- spin_unlock_irq(&rtc_lock);
+ spin_unlock_irqrestore(&rtc_lock, flags);
return -EINVAL;
}
@@ -187,7 +188,7 @@ static inline int set_rtc_time(struct rtc_time *time)
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
- spin_unlock_irq(&rtc_lock);
+ spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
}
diff --git a/include/linux/resume-trace.h b/include/linux/resume-trace.h
new file mode 100644
index 00000000000..a376bd4ade3
--- /dev/null
+++ b/include/linux/resume-trace.h
@@ -0,0 +1,30 @@
+#ifndef RESUME_TRACE_H
+#define RESUME_TRACE_H
+
+#ifdef CONFIG_PM_TRACE
+
+struct device;
+extern void set_trace_device(struct device *);
+extern void generate_resume_trace(void *tracedata, unsigned int user);
+
+#define TRACE_DEVICE(dev) set_trace_device(dev)
+#define TRACE_RESUME(user) do { \
+ void *tracedata; \
+ asm volatile("movl $1f,%0\n" \
+ ".section .tracedata,\"a\"\n" \
+ "1:\t.word %c1\n" \
+ "\t.long %c2\n" \
+ ".previous" \
+ :"=r" (tracedata) \
+ : "i" (__LINE__), "i" (__FILE__)); \
+ generate_resume_trace(tracedata, user); \
+} while (0)
+
+#else
+
+#define TRACE_DEVICE(dev) do { } while (0)
+#define TRACE_RESUME(dev) do { } while (0)
+
+#endif
+
+#endif
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index ce0dfb8f4a4..cdf315e794f 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -36,6 +36,15 @@ config PM_DEBUG
code. This is helpful when debugging and reporting various PM bugs,
like suspend support.
+config PM_TRACE
+ bool "Suspend/resume event tracing"
+ depends on PM && PM_DEBUG && X86
+ default y
+ ---help---
+ This enables some cheesy code to save the last PM event point in the
+ RTC across reboots, so that you can debug a machine that just hangs
+ during suspend (or more commonly, during resume).
+
config SOFTWARE_SUSPEND
bool "Software Suspend"
depends on PM && SWAP && (X86 && (!SMP || SUSPEND_SMP)) || ((FRV || PPC32) && !SMP)