diff options
| -rw-r--r-- | arch/blackfin/Kconfig | 175 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/head.S | 1 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/head.S | 1 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/head.S | 1 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf561/head.S | 1 | ||||
| -rw-r--r-- | arch/blackfin/mach-common/Makefile | 2 | ||||
| -rw-r--r-- | arch/blackfin/mach-common/arch_checks.c | 55 | ||||
| -rw-r--r-- | arch/blackfin/mach-common/dpmc.S | 2 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf533/bf533.h | 91 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/bf537.h | 91 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf548/bf548.h | 87 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf561/bf561.h | 87 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-common/clocks.h | 68 |
13 files changed, 242 insertions, 420 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 5c1e215c8b6..9ce675e8026 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -323,7 +323,7 @@ config CMDLINE to the kernel, you may specify one here. As a minimum, you should specify the memory size and the root device (e.g., mem=8M, root=/dev/nfs). -comment "Board Setup" +comment "Clock/PLL Setup" config CLKIN_HZ int "Crystal Frequency in Hz" @@ -335,6 +335,118 @@ config CLKIN_HZ help The frequency of CLKIN crystal oscillator on the board in Hz. +config BFIN_KERNEL_CLOCK + bool "Re-program Clocks while Kernel boots?" + default n + help + This option decides if kernel clocks are re-programed from the + bootloader settings. If the clocks are not set, the SDRAM settings + are also not changed, and the Bootloader does 100% of the hardware + configuration. + +config PLL_BYPASS + bool "Bypass PLL" + depends on BFIN_KERNEL_CLOCK + default n + +config CLKIN_HALF + bool "Half Clock In" + depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS) + default n + help + If this is set the clock will be divided by 2, before it goes to the PLL. + +config VCO_MULT + int "VCO Multiplier" + depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS) + range 1 64 + default "22" if BFIN533_EZKIT + default "45" if BFIN533_STAMP + default "20" if BFIN537_STAMP + default "22" if BFIN533_BLUETECHNIX_CM + default "20" if BFIN537_BLUETECHNIX_CM + default "20" if BFIN561_BLUETECHNIX_CM + default "20" if BFIN561_EZKIT + help + This controls the frequency of the on-chip PLL. This can be between 1 and 64. + PLL Frequency = (Crystal Frequency) * (this setting) + +choice + prompt "Core Clock Divider" + depends on BFIN_KERNEL_CLOCK + default CCLK_DIV_1 + help + This sets the frequency of the core. It can be 1, 2, 4 or 8 + Core Frequency = (PLL frequency) / (this setting) + +config CCLK_DIV_1 + bool "1" + +config CCLK_DIV_2 + bool "2" + +config CCLK_DIV_4 + bool "4" + +config CCLK_DIV_8 + bool "8" +endchoice + +config SCLK_DIV + int "System Clock Divider" + depends on BFIN_KERNEL_CLOCK + range 1 15 + default 5 if BFIN533_EZKIT + default 5 if BFIN533_STAMP + default 4 if BFIN537_STAMP + default 5 if BFIN533_BLUETECHNIX_CM + default 4 if BFIN537_BLUETECHNIX_CM + default 4 if BFIN561_BLUETECHNIX_CM + default 5 if BFIN561_EZKIT + help + This sets the frequency of the system clock (including SDRAM or DDR). + This can be between 1 and 15 + System Clock = (PLL frequency) / (this setting) + +# +# Max & Min Speeds for various Chips +# +config MAX_VCO_HZ + int + default 600000000 if BF522 + default 600000000 if BF525 + default 600000000 if BF527 + default 400000000 if BF531 + default 400000000 if BF532 + default 750000000 if BF533 + default 500000000 if BF534 + default 400000000 if BF536 + default 600000000 if BF537 + default 533000000 if BF538 + default 533000000 if BF539 + default 600000000 if BF542 + default 533000000 if BF544 + default 533000000 if BF549 + default 600000000 if BF561 + +config MIN_VCO_HZ + int + default 50000000 + +config MAX_SCLK_HZ + int + default 133000000 + +config MIN_SCLK_HZ + int + default 27000000 + +comment "Kernel Timer/Scheduler" + +source kernel/Kconfig.hz + +comment "Memory Setup" + config MEM_SIZE int "SDRAM Memory Size in MBytes" default 32 if BFIN533_EZKIT @@ -448,10 +560,6 @@ endmenu menu "Blackfin Kernel Optimizations" -comment "Timer Tick" - -source kernel/Kconfig.hz - comment "Memory Optimizations" config I_ENTRY_L1 @@ -672,63 +780,6 @@ config L1_MAX_PIECE Set the max memory pieces for the L1 SRAM allocation algorithm. Min value is 16. Max value is 1024. -menu "Clock Settings" - - -config BFIN_KERNEL_CLOCK - bool "Re-program Clocks while Kernel boots?" - default n - help - This option decides if kernel clocks are re-programed from the - bootloader settings. If the clocks are not set, the SDRAM settings - are also not changed, and the Bootloader does 100% of the hardware - configuration. - -config VCO_MULT - int "VCO Multiplier" - depends on BFIN_KERNEL_CLOCK - default "22" if BFIN533_EZKIT - default "45" if BFIN533_STAMP - default "20" if BFIN537_STAMP - default "22" if BFIN533_BLUETECHNIX_CM - default "20" if BFIN537_BLUETECHNIX_CM - default "20" if BFIN561_BLUETECHNIX_CM - default "20" if BFIN561_EZKIT - -config CCLK_DIV - int "Core Clock Divider" - depends on BFIN_KERNEL_CLOCK - default 1 if BFIN533_EZKIT - default 1 if BFIN533_STAMP - default 1 if BFIN537_STAMP - default 1 if BFIN533_BLUETECHNIX_CM - default 1 if BFIN537_BLUETECHNIX_CM - default 1 if BFIN561_BLUETECHNIX_CM - default 1 if BFIN561_EZKIT - -config SCLK_DIV - int "System Clock Divider" - depends on BFIN_KERNEL_CLOCK - default 5 if BFIN533_EZKIT - default 5 if BFIN533_STAMP - default 4 if BFIN537_STAMP - default 5 if BFIN533_BLUETECHNIX_CM - default 4 if BFIN537_BLUETECHNIX_CM - default 4 if BFIN561_BLUETECHNIX_CM - default 5 if BFIN561_EZKIT - -config CLKIN_HALF - bool "Half ClockIn" - depends on BFIN_KERNEL_CLOCK - default n - -config PLL_BYPASS - bool "Bypass PLL" - depends on BFIN_KERNEL_CLOCK - default n - -endmenu - comment "Asynchonous Memory Configuration" menu "EBIU_AMBCTL Global Control" diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 69da0e8b773..9c5378bb8a2 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -32,6 +32,7 @@ #include <asm/blackfin.h> #include <asm/trace.h> #if CONFIG_BFIN_KERNEL_CLOCK +#include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif #if CONFIG_DEBUG_KERNEL_START diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index b1d4b91b7ae..82ea0470591 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -33,6 +33,7 @@ #include <asm/trace.h> #if CONFIG_BFIN_KERNEL_CLOCK +#include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 47cd91777a3..72087c2e6a8 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -31,6 +31,7 @@ #include <asm/blackfin.h> #include <asm/trace.h> #if CONFIG_BFIN_KERNEL_CLOCK +#include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 173893429b0..83cd3f9bbf2 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -33,6 +33,7 @@ #include <asm/trace.h> #if CONFIG_BFIN_KERNEL_CLOCK +#include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 0279ede7039..4d7733dfd5d 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -4,7 +4,7 @@ obj-y := \ cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \ - interrupt.o lock.o irqpanic.o + interrupt.o lock.o irqpanic.o arch_checks.o obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c new file mode 100644 index 00000000000..f9160d83b91 --- /dev/null +++ b/arch/blackfin/mach-common/arch_checks.c @@ -0,0 +1,55 @@ +/* + * File: arch/blackfin/mach-common/arch_checks.c + * Based on: + * Author: Robin Getz <rgetz@blackfin.uclinux.org> + * + * Created: 25Jul07 + * Description: Do some checking to make sure things are OK + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <asm/mach/anomaly.h> +#include <asm/mach-common/clocks.h> + +#ifdef CONFIG_BFIN_KERNEL_CLOCK + +# if (CONFIG_VCO_HZ > CONFIG_MAX_VCO_HZ) +# error "VCO selected is more than maximum value. Please change the VCO multipler" +# endif + +# if (CONFIG_SCLK_HZ > CONFIG_MAX_SCLK_HZ) +# error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" +# endif + +# if (CONFIG_SCLK_HZ < CONFIG_MIN_SCLK_HZ) +# error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" +# endif + +# if (ANOMALY_05000273) && (CONFIG_SCLK_HZ * 2 > CONFIG_CCLK_HZ) +# error "ANOMALY 05000273, please make sure CCLK is at least 2x SCLK" +# endif + +# if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) && (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) && (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) +# error "Please select sclk less than cclk" +# endif + +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S index 04194dca015..39fbc286110 100644 --- a/arch/blackfin/mach-common/dpmc.S +++ b/arch/blackfin/mach-common/dpmc.S @@ -300,7 +300,7 @@ ENTRY(_sleep_deeper) P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); R5 = W[P0](z); - R0.L = (MIN_VC/CONFIG_CLKIN_HZ) << 9; + R0.L = (CONFIG_MIN_VCO_HZ/CONFIG_CLKIN_HZ) << 9; W[P0] = R0.l; SSYNC; diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/include/asm-blackfin/mach-bf533/bf533.h index 41e4e834e2d..cb210f6f768 100644 --- a/include/asm-blackfin/mach-bf533/bf533.h +++ b/include/asm-blackfin/mach-bf533/bf533.h @@ -141,97 +141,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) -#define MAX_VC 650000000 -#define MIN_VC 50000000 - -#ifdef CONFIG_BFIN_KERNEL_CLOCK -/********************************PLL Settings **************************************/ -#if (CONFIG_VCO_MULT < 0) -#error "VCO Multiplier is less than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT == 0) -#error "VCO Multiplier should be greater than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT > 64) -#error "VCO Multiplier is more than 64. Please select a different value" -#endif - -#ifndef CONFIG_CLKIN_HALF -#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -#else -#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) -#endif - -#ifndef CONFIG_PLL_BYPASS -#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) -#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#if (CONFIG_SCLK_DIV < 1) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_SCLK_DIV > 15) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_CCLK_DIV != 1) -#if (CONFIG_CCLK_DIV != 2) -#if (CONFIG_CCLK_DIV != 4) -#if (CONFIG_CCLK_DIV != 8) -#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" -#endif -#endif -#endif -#endif - -#if (CONFIG_VCO_HZ > MAX_VC) -#error "VCO selected is more than maximum value. Please change the VCO multipler" -#endif - -#if (CONFIG_SCLK_HZ > 133000000) -#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ < 27000000) -#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) -#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) -#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) -#error "Please select sclk less than cclk" -#endif -#endif -#endif - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1) -#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK -#endif - -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ - #ifdef CONFIG_BF533 #define CPU "BF533" #define CPUID 0x027a5000 diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/include/asm-blackfin/mach-bf537/bf537.h index 04b08164e29..603823f51ca 100644 --- a/include/asm-blackfin/mach-bf537/bf537.h +++ b/include/asm-blackfin/mach-bf537/bf537.h @@ -121,97 +121,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) -#define MAX_VC 650000000 -#define MIN_VC 50000000 - -/********************************PLL Settings **************************************/ -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#if (CONFIG_VCO_MULT < 0) -#error "VCO Multiplier is less than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT == 0) -#error "VCO Multiplier should be greater than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT > 64) -#error "VCO Multiplier is more than 64. Please select a different value" -#endif - -#ifndef CONFIG_CLKIN_HALF -#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -#else -#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) -#endif - -#ifndef CONFIG_PLL_BYPASS -#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) -#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#if (CONFIG_SCLK_DIV < 1) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_SCLK_DIV > 15) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_CCLK_DIV != 1) -#if (CONFIG_CCLK_DIV != 2) -#if (CONFIG_CCLK_DIV != 4) -#if (CONFIG_CCLK_DIV != 8) -#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" -#endif -#endif -#endif -#endif - -#if (CONFIG_VCO_HZ > MAX_VC) -#error "VCO selected is more than maximum value. Please change the VCO multipler" -#endif - -#if (CONFIG_SCLK_HZ > 133000000) -#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ < 27000000) -#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) -#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) -#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) -#error "Please select sclk less than cclk" -#endif -#endif -#endif - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1) -#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK -#endif - -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ - #ifdef CONFIG_BF537 #define CPU "BF537" #define CPUID 0x027c8000 diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/include/asm-blackfin/mach-bf548/bf548.h index 9498313a2cb..50306a84662 100644 --- a/include/asm-blackfin/mach-bf548/bf548.h +++ b/include/asm-blackfin/mach-bf548/bf548.h @@ -106,93 +106,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN) -#define MAX_VC 650000000 -#define MIN_VC 50000000 - -/********************************PLL Settings **************************************/ -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#if (CONFIG_VCO_MULT < 0) -#error "VCO Multiplier is less than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT == 0) -#error "VCO Multiplier should be greater than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT > 64) -#error "VCO Multiplier is more than 64. Please select a different value" -#endif - -#ifndef CONFIG_CLKIN_HALF -#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -#else -#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) -#endif - -#ifndef CONFIG_PLL_BYPASS -#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) -#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#if (CONFIG_SCLK_DIV < 1) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_SCLK_DIV > 15) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_CCLK_DIV != 1) -#if (CONFIG_CCLK_DIV != 2) -#if (CONFIG_CCLK_DIV != 4) -#if (CONFIG_CCLK_DIV != 8) -#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" -#endif -#endif -#endif -#endif - -#if (CONFIG_VCO_HZ > MAX_VC) -#error "VCO selected is more than maximum value. Please change the VCO multipler" -#endif - -#if (CONFIG_SCLK_HZ > 133000000) -#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ < 27000000) -#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) -#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) -#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) -#error "Please select sclk less than cclk" -#endif -#endif -#endif - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ - #ifdef CONFIG_BF542 #define CPU "BF542" #define CPUID 0x027c8000 diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/include/asm-blackfin/mach-bf561/bf561.h index 8cc2e0033e0..53b650f3134 100644 --- a/include/asm-blackfin/mach-bf561/bf561.h +++ b/include/asm-blackfin/mach-bf561/bf561.h @@ -230,93 +230,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO | V_B0PEN | V_B1PEN | V_B2PEN | V_B3PEN | 0x0002) -#define MAX_VC 600000000 -#define MIN_VC 50000000 - -/******************************* PLL Settings ********************************/ -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#if (CONFIG_VCO_MULT < 0) -#error "VCO Multiplier is less than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT == 0) -#error "VCO Multiplier should be greater than 0. Please select a different value" -#endif - -#ifndef CONFIG_CLKIN_HALF -#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -#else -#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) -#endif - -#ifndef CONFIG_PLL_BYPASS -#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) -#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#if (CONFIG_SCLK_DIV < 1) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_SCLK_DIV > 15) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_CCLK_DIV != 1) -#if (CONFIG_CCLK_DIV != 2) -#if (CONFIG_CCLK_DIV != 4) -#if (CONFIG_CCLK_DIV != 8) -#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" -#endif -#endif -#endif -#endif - -#if (CONFIG_VCO_HZ > MAX_VC) -#error "VCO selected is more than maximum value. Please change the VCO multipler" -#endif - -#if (CONFIG_SCLK_HZ > 133000000) -#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ < 27000000) -#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) -#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) -#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) -#error "Please select sclk less than cclk" -#endif -#endif -#endif - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1) -#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK -#endif - -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ - #ifdef CONFIG_BF561 #define CPU "BF561" #define CPUID 0x027bb000 diff --git a/include/asm-blackfin/mach-common/clocks.h b/include/asm-blackfin/mach-common/clocks.h new file mode 100644 index 00000000000..5e8113ee893 --- /dev/null +++ b/include/asm-blackfin/mach-common/clocks.h @@ -0,0 +1,68 @@ +/* + * File: include/asm-blackfin/mach-common/clocks.h + * Based on: include/asm-blackfin/mach-bf537/bf537.h + * Author: Robin Getz <rgetz@blackfin.uclinux.org> + * + * Created: 25Jul07 + * Description: Common Clock definitions for various kernel files + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + + +#ifdef CONFIG_CCLK_DIV_1 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +# define CONFIG_CCLK_DIV 1 +#endif + +#ifdef CONFIG_CCLK_DIV_2 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +# define CONFIG_CCLK_DIV 2 +#endif + +#ifdef CONFIG_CCLK_DIV_4 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +# define CONFIG_CCLK_DIV 4 +#endif + +#ifdef CONFIG_CCLK_DIV_8 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +# define CONFIG_CCLK_DIV 8 +#endif + +#ifndef CONFIG_PLL_BYPASS +# ifndef CONFIG_CLKIN_HALF +# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) +# else +# define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) +# endif + +# define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) +# define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) + +#else +# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ) +# define CONFIG_CCLK_HZ (CONFIG_CLKIN_HZ) +# define CONFIG_SCLK_HZ (CONFIG_CLKIN_HZ) +# define CONFIG_VCO_MULT 0 +#endif + |