aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/microblaze/Kconfig121
-rw-r--r--arch/microblaze/Makefile6
-rw-r--r--arch/microblaze/boot/Makefile2
-rw-r--r--arch/microblaze/configs/mmu_defconfig798
-rw-r--r--arch/microblaze/include/asm/Kbuild25
-rw-r--r--arch/microblaze/include/asm/cacheflush.h20
-rw-r--r--arch/microblaze/include/asm/checksum.h14
-rw-r--r--arch/microblaze/include/asm/current.h8
-rw-r--r--arch/microblaze/include/asm/dma-mapping.h130
-rw-r--r--arch/microblaze/include/asm/dma.h5
-rw-r--r--arch/microblaze/include/asm/elf.h93
-rw-r--r--arch/microblaze/include/asm/entry.h37
-rw-r--r--arch/microblaze/include/asm/exceptions.h24
-rw-r--r--arch/microblaze/include/asm/flat.h1
-rw-r--r--arch/microblaze/include/asm/gpio.h6
-rw-r--r--arch/microblaze/include/asm/io.h31
-rw-r--r--arch/microblaze/include/asm/mmu.h104
-rw-r--r--arch/microblaze/include/asm/mmu_context.h26
-rw-r--r--arch/microblaze/include/asm/mmu_context_mm.h140
-rw-r--r--arch/microblaze/include/asm/mmu_context_no.h23
-rw-r--r--arch/microblaze/include/asm/page.h166
-rw-r--r--arch/microblaze/include/asm/pgalloc.h191
-rw-r--r--arch/microblaze/include/asm/pgtable.h538
-rw-r--r--arch/microblaze/include/asm/posix_types.h2
-rw-r--r--arch/microblaze/include/asm/processor.h95
-rw-r--r--arch/microblaze/include/asm/ptrace.h1
-rw-r--r--arch/microblaze/include/asm/registers.h21
-rw-r--r--arch/microblaze/include/asm/sections.h3
-rw-r--r--arch/microblaze/include/asm/segment.h20
-rw-r--r--arch/microblaze/include/asm/setup.h10
-rw-r--r--arch/microblaze/include/asm/stat.h77
-rw-r--r--arch/microblaze/include/asm/string.h2
-rw-r--r--arch/microblaze/include/asm/syscalls.h3
-rw-r--r--arch/microblaze/include/asm/thread_info.h20
-rw-r--r--arch/microblaze/include/asm/tlb.h8
-rw-r--r--arch/microblaze/include/asm/tlbflush.h48
-rw-r--r--arch/microblaze/include/asm/uaccess.h305
-rw-r--r--arch/microblaze/include/asm/unaligned.h3
-rw-r--r--arch/microblaze/kernel/Makefile1
-rw-r--r--arch/microblaze/kernel/asm-offsets.c21
-rw-r--r--arch/microblaze/kernel/early_printk.c3
-rw-r--r--arch/microblaze/kernel/entry-nommu.S2
-rw-r--r--arch/microblaze/kernel/entry.S1116
-rw-r--r--arch/microblaze/kernel/exceptions.c45
-rw-r--r--arch/microblaze/kernel/head.S190
-rw-r--r--arch/microblaze/kernel/hw_exception_handler.S746
-rw-r--r--arch/microblaze/kernel/microblaze_ksyms.c2
-rw-r--r--arch/microblaze/kernel/misc.S120
-rw-r--r--arch/microblaze/kernel/process.c59
-rw-r--r--arch/microblaze/kernel/prom.c7
-rw-r--r--arch/microblaze/kernel/setup.c62
-rw-r--r--arch/microblaze/kernel/signal.c109
-rw-r--r--arch/microblaze/kernel/syscall_table.S6
-rw-r--r--arch/microblaze/kernel/traps.c42
-rw-r--r--arch/microblaze/kernel/vmlinux.lds.S5
-rw-r--r--arch/microblaze/lib/Makefile3
-rw-r--r--arch/microblaze/lib/checksum.c31
-rw-r--r--arch/microblaze/lib/memcpy.c5
-rw-r--r--arch/microblaze/lib/uaccess_old.S135
-rw-r--r--arch/microblaze/mm/Makefile2
-rw-r--r--arch/microblaze/mm/fault.c304
-rw-r--r--arch/microblaze/mm/init.c169
-rw-r--r--arch/microblaze/mm/mmu_context.c70
-rw-r--r--arch/microblaze/mm/pgtable.c286
-rw-r--r--drivers/block/Kconfig2
-rw-r--r--drivers/char/Kconfig2
-rw-r--r--drivers/gpio/Kconfig2
-rw-r--r--drivers/input/serio/Kconfig2
-rw-r--r--drivers/of/Kconfig8
-rw-r--r--drivers/spi/Kconfig2
-rw-r--r--drivers/usb/Kconfig1
-rw-r--r--drivers/video/Kconfig2
72 files changed, 6130 insertions, 559 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 8cc312b5d4d..b50b845fdd5 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -6,6 +6,7 @@ mainmenu "Linux/Microblaze Kernel Configuration"
config MICROBLAZE
def_bool y
select HAVE_LMB
+ select ARCH_WANT_OPTIONAL_GPIOLIB
config SWAP
def_bool n
@@ -49,13 +50,14 @@ config GENERIC_CLOCKEVENTS
config GENERIC_HARDIRQS_NO__DO_IRQ
def_bool y
+config GENERIC_GPIO
+ def_bool y
+
config PCI
- depends on !MMU
def_bool n
config NO_DMA
- depends on !MMU
- def_bool n
+ def_bool y
source "init/Kconfig"
@@ -72,7 +74,8 @@ source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
config MMU
- def_bool n
+ bool "MMU support"
+ default n
config NO_MMU
bool
@@ -105,9 +108,6 @@ config CMDLINE_FORCE
config OF
def_bool y
-config OF_DEVICE
- def_bool y
-
config PROC_DEVICETREE
bool "Support for device tree in /proc"
depends on PROC_FS
@@ -118,6 +118,113 @@ config PROC_DEVICETREE
endmenu
+menu "Advanced setup"
+
+config ADVANCED_OPTIONS
+ bool "Prompt for advanced kernel configuration options"
+ depends on MMU
+ help
+ This option will enable prompting for a variety of advanced kernel
+ configuration options. These options can cause the kernel to not
+ work if they are set incorrectly, but can be used to optimize certain
+ aspects of kernel memory management.
+
+ Unless you know what you are doing, say N here.
+
+comment "Default settings for advanced configuration options are used"
+ depends on !ADVANCED_OPTIONS
+
+config HIGHMEM_START_BOOL
+ bool "Set high memory pool address"
+ depends on ADVANCED_OPTIONS && HIGHMEM
+ help
+ This option allows you to set the base address of the kernel virtual
+ area used to map high memory pages. This can be useful in
+ optimizing the layout of kernel virtual memory.
+
+ Say N here unless you know what you are doing.
+
+config HIGHMEM_START
+ hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
+ depends on MMU
+ default "0xfe000000"
+
+config LOWMEM_SIZE_BOOL
+ bool "Set maximum low memory"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the maximum amount of memory which
+ will be used as "low memory", that is, memory which the kernel can
+ access directly, without having to set up a kernel virtual mapping.
+ This can be useful in optimizing the layout of kernel virtual
+ memory.
+
+ Say N here unless you know what you are doing.
+
+config LOWMEM_SIZE
+ hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
+ depends on MMU
+ default "0x30000000"
+
+config KERNEL_START_BOOL
+ bool "Set custom kernel base address"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the kernel virtual address at which
+ the kernel will map low memory (the kernel image will be linked at
+ this address). This can be useful in optimizing the virtual memory
+ layout of the system.
+
+ Say N here unless you know what you are doing.
+
+config KERNEL_START
+ hex "Virtual address of kernel base" if KERNEL_START_BOOL
+ default "0xc0000000" if MMU
+ default KERNEL_BASE_ADDR if !MMU
+
+config TASK_SIZE_BOOL
+ bool "Set custom user task size"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the amount of virtual address space
+ allocated to user tasks. This can be useful in optimizing the
+ virtual memory layout of the system.
+
+ Say N here unless you know what you are doing.
+
+config TASK_SIZE
+ hex "Size of user task space" if TASK_SIZE_BOOL
+ depends on MMU
+ default "0x80000000"
+
+config CONSISTENT_START_BOOL
+ bool "Set custom consistent memory pool address"
+ depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+ help
+ This option allows you to set the base virtual address
+ of the the consistent memory pool. This pool of virtual
+ memory is used to make consistent memory allocations.
+
+config CONSISTENT_START
+ hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
+ depends on MMU
+ default "0xff100000" if NOT_COHERENT_CACHE
+
+config CONSISTENT_SIZE_BOOL
+ bool "Set custom consistent memory pool size"
+ depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+ help
+ This option allows you to set the size of the the
+ consistent memory pool. This pool of virtual memory
+ is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+ hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+ depends on MMU
+ default "0x00200000" if NOT_COHERENT_CACHE
+
+endmenu
+
source "mm/Kconfig"
menu "Exectuable file formats"
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index aaadfa701da..d0bcf80a113 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -1,4 +1,8 @@
+ifeq ($(CONFIG_MMU),y)
+UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
+else
UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
+endif
# What CPU vesion are we building for, and crack it open
# as major.minor.rev
@@ -36,6 +40,8 @@ CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
# r31 holds current when in kernel mode
CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+LDFLAGS :=
+LDFLAGS_vmlinux :=
LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index 844edf406d3..c2bb043a029 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -7,6 +7,8 @@ targets := linux.bin linux.bin.gz
OBJCOPYFLAGS_linux.bin := -O binary
$(obj)/linux.bin: vmlinux FORCE
+ [ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
+ touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
$(call if_changed,objcopy)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
new file mode 100644
index 00000000000..bd0b85ec38f
--- /dev/null
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -0,0 +1,798 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Fri May 22 10:02:33 2009
+#
+CONFIG_MICROBLAZE=y
+# CONFIG_SWAP is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# Platform options
+#
+CONFIG_PLATFORM_GENERIC=y
+CONFIG_OPT_LIB_FUNCTION=y
+CONFIG_OPT_LIB_ASM=y
+CONFIG_ALLOW_EDIT_AUTO=y
+
+#
+# Automatic platform settings from Kconfig.auto
+#
+
+#
+# Definitions for MICROBLAZE0
+#
+CONFIG_KERNEL_BASE_ADDR=0x90000000
+CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
+CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
+CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.d"
+
+#
+# Processor type and features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_MMU=y
+
+#
+# Boot options
+#
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyUL0,115200"
+CONFIG_CMDLINE_FORCE=y
+CONFIG_OF=y
+CONFIG_PROC_DEVICETREE=y
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+
+#
+# Exectuable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_XILINX_HWICAP is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SLAB_LEAK is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_SAMPLES is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_HEART_BEAT=y
+CONFIG_DEBUG_BOOTMEM=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild
index 31820dfef56..db5294c30ca 100644
--- a/arch/microblaze/include/asm/Kbuild
+++ b/arch/microblaze/include/asm/Kbuild
@@ -1,26 +1,3 @@
include include/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += linkage.h
-header-y += msgbuf.h
-header-y += poll.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += socket.h
-header-y += sockios.h
-header-y += statfs.h
-header-y += stat.h
-header-y += termbits.h
-header-y += ucontext.h
-
-unifdef-y += cputable.h
-unifdef-y += elf.h
-unifdef-y += termios.h
+header-y += elf.h
diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h
index 3300b785049..f989d6aad64 100644
--- a/arch/microblaze/include/asm/cacheflush.h
+++ b/arch/microblaze/include/asm/cacheflush.h
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2007 PetaLogix
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2007 John Williams <john.williams@petalogix.com>
* based on v850 version which was
* Copyright (C) 2001,02,03 NEC Electronics Corporation
@@ -43,6 +44,23 @@
#define flush_icache_range(start, len) __invalidate_icache_range(start, len)
#define flush_icache_page(vma, pg) do { } while (0)
+#ifndef CONFIG_MMU
+# define flush_icache_user_range(start, len) do { } while (0)
+#else
+# define flush_icache_user_range(vma, pg, adr, len) __invalidate_icache_all()
+
+# define flush_page_to_ram(page) do { } while (0)
+
+# define flush_icache() __invalidate_icache_all()
+# define flush_cache_sigtramp(vaddr) \
+ __invalidate_icache_range(vaddr, vaddr + 8)
+
+# define flush_dcache_mmap_lock(mapping) do { } while (0)
+# define flush_dcache_mmap_unlock(mapping) do { } while (0)
+
+# define flush_cache_dup_mm(mm) do { } while (0)
+#endif
+
#define flush_cache_vmap(start, end) do { } while (0)
#define flush_cache_vunmap(start, end) do { } while (0)
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
index 92b30762ce5..97ea46b5cf8 100644
--- a/arch/microblaze/include/asm/checksum.h
+++ b/arch/microblaze/include/asm/checksum.h
@@ -51,7 +51,8 @@ extern __wsum csum_partial(const void *buff, int len, __wsum sum);
* here even more important to align src and dst on a 32-bit (or even
* better 64-bit) boundary
*/
-extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum);
+extern __wsum csum_partial_copy(const void *src, void *dst, int len,
+ __wsum sum);
/*
* the same as csum_partial_copy, but copies from user space.
@@ -59,8 +60,8 @@ extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum);
* here even more important to align src and dst on a 32-bit (or even
* better 64-bit) boundary
*/
-extern __wsum csum_partial_copy_from_user(const char *src, char *dst,
- int len, int sum, int *csum_err);
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum sum, int *csum_err);
#define csum_partial_copy_nocheck(src, dst, len, sum) \
csum_partial_copy((src), (dst), (len), (sum))
@@ -75,11 +76,12 @@ extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
/*
* Fold a partial checksum
*/
-static inline __sum16 csum_fold(unsigned int sum)
+static inline __sum16 csum_fold(__wsum csum)
{
+ u32 sum = (__force u32)csum;
sum = (sum & 0xffff) + (sum >> 16);
sum = (sum & 0xffff) + (sum >> 16);
- return ~sum;
+ return (__force __sum16)~sum;
}
static inline __sum16
@@ -93,6 +95,6 @@ csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
*/
-extern __sum16 ip_compute_csum(const unsigned char *buff, int len);
+extern __sum16 ip_compute_csum(const void *buff, int len);
#endif /* _ASM_MICROBLAZE_CHECKSUM_H */
diff --git a/arch/microblaze/include/asm/current.h b/arch/microblaze/include/asm/current.h
index 8375ea991e2..29303ed825c 100644
--- a/arch/microblaze/include/asm/current.h
+++ b/arch/microblaze/include/asm/current.h
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -9,6 +11,12 @@
#ifndef _ASM_MICROBLAZE_CURRENT_H
#define _ASM_MICROBLAZE_CURRENT_H
+/*
+ * Register used to hold the current task pointer while in the kernel.
+ * Any `call clobbered' register without a special meaning should be OK,
+ * but check asm/microblaze/kernel/entry.S to be sure.
+ */
+#define CURRENT_TASK r31
# ifndef __ASSEMBLY__
/*
* Dedicate r31 to keeping the current task pointer
diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h
index 17336252a9b..d00e4009916 100644
--- a/arch/microblaze/include/asm/dma-mapping.h
+++ b/arch/microblaze/include/asm/dma-mapping.h
@@ -1,129 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_DMA_MAPPING_H
-#define _ASM_MICROBLAZE_DMA_MAPPING_H
-
-#include <asm/cacheflush.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-
-struct scatterlist;
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-
-/* FIXME */
-static inline int
-dma_supported(struct device *dev, u64 mask)
-{
- return 1;
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- BUG();
- return 0;
-}
-
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
- enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction direction)
-{
- BUG();
- return 0;
-}
-
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
- enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
- size_t size, enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
- BUG();
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
- return 0;
-}
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag)
-{
- return NULL; /* consistent_alloc(flag, size, dma_handle); */
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
- void *vaddr, dma_addr_t dma_handle)
-{
- BUG();
-}
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
-
- return virt_to_bus(ptr);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction direction)
-{
- switch (direction) {
- case DMA_FROM_DEVICE:
- flush_dcache_range((unsigned)dma_addr,
- (unsigned)dma_addr + size);
- /* Fall through */
- case DMA_TO_DEVICE:
- break;
- default:
- BUG();
- }
-}
-
-#endif /* _ASM_MICROBLAZE_DMA_MAPPING_H */
+#include <asm-generic/dma-mapping-broken.h>
diff --git a/arch/microblaze/include/asm/dma.h b/arch/microblaze/include/asm/dma.h
index 0967fa04fc5..08c073badf1 100644
--- a/arch/microblaze/include/asm/dma.h
+++ b/arch/microblaze/include/asm/dma.h
@@ -9,8 +9,13 @@
#ifndef _ASM_MICROBLAZE_DMA_H
#define _ASM_MICROBLAZE_DMA_H
+#ifndef CONFIG_MMU
/* we don't have dma address limit. define it as zero to be
* unlimited. */
#define MAX_DMA_ADDRESS (0)
+#else
+/* Virtual address corresponding to last available physical memory address. */
+#define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
+#endif
#endif /* _ASM_MICROBLAZE_DMA_H */
diff --git a/arch/microblaze/include/asm/elf.h b/arch/microblaze/include/asm/elf.h
index 81337f24134..f92fc0dda00 100644
--- a/arch/microblaze/include/asm/elf.h
+++ b/arch/microblaze/include/asm/elf.h
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -27,4 +29,95 @@
*/
#define ELF_CLASS ELFCLASS32
+#ifndef __uClinux__
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/byteorder.h>
+
+#ifndef ELF_GREG_T
+#define ELF_GREG_T
+typedef unsigned long elf_greg_t;
+#endif
+
+#ifndef ELF_NGREG
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+#endif
+
+#ifndef ELF_GREGSET_T
+#define ELF_GREGSET_T
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+#endif
+
+#ifndef ELF_FPREGSET_T
+#define ELF_FPREGSET_T
+
+/* TBD */
+#define ELF_NFPREG 33 /* includes fsr */
+typedef unsigned long elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* typedef struct user_fpu_struct elf_fpregset_t; */
+#endif
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader. We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+
+#define ELF_ET_DYN_BASE (0x08000000)
+
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA ELFDATA2LSB
+#else
+#define ELF_DATA ELFDATA2MSB
+#endif
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+
+#define ELF_CORE_COPY_REGS(_dest, _regs) \
+ memcpy((char *) &_dest, (char *) _regs, \
+ sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports. This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization. This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM (NULL)
+
+/* Added _f parameter. Is this definition correct: TBD */
+#define ELF_PLAT_INIT(_r, _f) \
+do { \
+ _r->r1 = _r->r1 = _r->r2 = _r->r3 = \
+ _r->r4 = _r->r5 = _r->r6 = _r->r7 = \
+ _r->r8 = _r->r9 = _r->r10 = _r->r11 = \
+ _r->r12 = _r->r13 = _r->r14 = _r->r15 = \
+ _r->r16 = _r->r17 = _r->r18 = _r->r19 = \
+ _r->r20 = _r->r21 = _r->r22 = _r->r23 = \
+ _r->r24 = _r->r25 = _r->r26 = _r->r27 = \
+ _r->r28 = _r->r29 = _r->r30 = _r->r31 = \
+ 0; \
+} while (0)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT)
+#endif
+
+#endif /* __uClinux__ */
+
#endif /* _ASM_MICROBLAZE_ELF_H */
diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h
index e4c3aef884d..61abbd23264 100644
--- a/arch/microblaze/include/asm/entry.h
+++ b/arch/microblaze/include/asm/entry.h
@@ -1,8 +1,8 @@
/*
* Definitions used by low-level trap handlers
*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2007 - 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2007 John Williams <john.williams@petalogix.com>
*
* This file is subject to the terms and conditions of the GNU General
@@ -31,7 +31,40 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
# endif /* __ASSEMBLY__ */
+#ifndef CONFIG_MMU
+
/* noMMU hasn't any space for args */
# define STATE_SAVE_ARG_SPACE (0)
+#else /* CONFIG_MMU */
+
+/* If true, system calls save and restore all registers (except result
+ * registers, of course). If false, then `call clobbered' registers
+ * will not be preserved, on the theory that system calls are basically
+ * function calls anyway, and the caller should be able to deal with it.
+ * This is a security risk, of course, as `internal' values may leak out
+ * after a system call, but that certainly doesn't matter very much for
+ * a processor with no MMU protection! For a protected-mode kernel, it
+ * would be faster to just zero those registers before returning.
+ *
+ * I can not rely on the glibc implementation. If you turn it off make
+ * sure that r11/r12 is saved in user-space. --KAA
+ *
+ * These are special variables using by the kernel trap/interrupt code
+ * to save registers in, at a time when there are no spare registers we
+ * can use to do so, and we can't depend on the value of the stack
+ * pointer. This means that they must be within a signed 16-bit
+ * displacement of 0x00000000.
+ */
+
+/* A `state save frame' is a struct pt_regs preceded by some extra space
+ * suitable for a function call stack frame. */
+
+/* Amount of room on the stack reserved for arguments and to satisfy the
+ * C calling conventions, in addition to the space used by the struct
+ * pt_regs that actually holds saved values. */
+#define STATE_SAVE_ARG_SPACE (6*4) /* Up to six arguments */
+
+#endif /* CONFIG_MMU */
+
#endif /* _ASM_MICROBLAZE_ENTRY_H */
diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h
index 24ca540e77c..90731df9e57 100644
--- a/arch/microblaze/include/asm/exceptions.h
+++ b/arch/microblaze/include/asm/exceptions.h
@@ -1,8 +1,8 @@
/*
* Preliminary support for HW exception handing for Microblaze
*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
*
* This file is subject to the terms and conditions of the GNU General
@@ -64,21 +64,13 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
void die(const char *str, struct pt_regs *fp, long err);
void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
-#if defined(CONFIG_XMON)
-extern void xmon(struct pt_regs *regs);
-extern int xmon_bpt(struct pt_regs *regs);
-extern int xmon_sstep(struct pt_regs *regs);
-extern int xmon_iabr_match(struct pt_regs *regs);
-extern int xmon_dabr_match(struct pt_regs *regs);
-extern void (*xmon_fault_handler)(struct pt_regs *regs);
+#ifdef CONFIG_MMU
+void __bug(const char *file, int line, void *data);
+int bad_trap(int trap_num, struct pt_regs *regs);
+int debug_trap(struct pt_regs *regs);
+#endif /* CONFIG_MMU */
-void (*debugger)(struct pt_regs *regs) = xmon;
-int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
-int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
-int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
-int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
-void (*debugger_fault_handler)(struct pt_regs *regs);
-#elif defined(CONFIG_KGDB)
+#if defined(CONFIG_KGDB)
void (*debugger)(struct pt_regs *regs);
int (*debugger_bpt)(struct pt_regs *regs);
int (*debugger_sstep)(struct pt_regs *regs);
diff --git a/arch/microblaze/include/asm/flat.h b/arch/microblaze/include/asm/flat.h
index acf0da543ef..6847c1512c7 100644
--- a/arch/microblaze/include/asm/flat.h
+++ b/arch/microblaze/include/asm/flat.h
@@ -13,7 +13,6 @@
#include <asm/unaligned.h>
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
diff --git a/arch/microblaze/include/asm/gpio.h b/arch/microblaze/include/asm/gpio.h
index ea04632399d..2345ac354d9 100644
--- a/arch/microblaze/include/asm/gpio.h
+++ b/arch/microblaze/include/asm/gpio.h
@@ -11,8 +11,8 @@
* (at your option) any later version.
*/
-#ifndef __ASM_POWERPC_GPIO_H
-#define __ASM_POWERPC_GPIO_H
+#ifndef _ASM_MICROBLAZE_GPIO_H
+#define _ASM_MICROBLAZE_GPIO_H
#include <linux/errno.h>
#include <asm-generic/gpio.h>
@@ -53,4 +53,4 @@ static inline int irq_to_gpio(unsigned int irq)
#endif /* CONFIG_GPIOLIB */
-#endif /* __ASM_POWERPC_GPIO_H */
+#endif /* _ASM_MICROBLAZE_GPIO_H */
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 8b5853ee6b5..5c173424d07 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -12,6 +14,9 @@
#include <asm/byteorder.h>
#include <asm/page.h>
#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/mm.h> /* Get struct page {...} */
+
#define IO_SPACE_LIMIT (0xFFFFFFFF)
@@ -112,6 +117,30 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
+#ifdef CONFIG_MMU
+
+#define mm_ptov(addr) ((void *)__phys_to_virt(addr))
+#define mm_vtop(addr) ((unsigned long)__virt_to_phys(addr))
+#define phys_to_virt(addr) ((void *)__phys_to_virt(addr))
+#define virt_to_phys(addr) ((unsigned long)__virt_to_phys(addr))
+#define virt_to_bus(addr) ((unsigned long)__virt_to_phys(addr))
+
+#define __page_address(page) \
+ (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
+#define page_to_phys(page) virt_to_phys((void *)__page_address(page))
+#define page_to_bus(page) (page_to_phys(page))
+#define bus_to_virt(addr) (phys_to_virt(addr))
+
+extern void iounmap(void *addr);
+/*extern void *__ioremap(phys_addr_t address, unsigned long size,
+ unsigned long flags);*/
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+#define ioremap_writethrough(addr, size) ioremap((addr), (size))
+#define ioremap_nocache(addr, size) ioremap((addr), (size))
+#define ioremap_fullcache(addr, size) ioremap((addr), (size))
+
+#else /* CONFIG_MMU */
+
/**
* virt_to_phys - map virtual addresses to physical
* @address: address to remap
@@ -160,6 +189,8 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
#define iounmap(addr) ((void)0)
#define ioremap_nocache(physaddr, size) ioremap(physaddr, size)
+#endif /* CONFIG_MMU */
+
/*
* Convert a physical pointer to a virtual kernel pointer for /dev/mem
* access
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index 0e0431d6163..66cad6a99d7 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -9,11 +11,109 @@
#ifndef _ASM_MICROBLAZE_MMU_H
#define _ASM_MICROBLAZE_MMU_H
-#ifndef __ASSEMBLY__
+# ifndef CONFIG_MMU
+# ifndef __ASSEMBLY__
typedef struct {
struct vm_list_struct *vmlist;
unsigned long end_brk;
} mm_context_t;
-#endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLY__ */
+# else /* CONFIG_MMU */
+# ifdef __KERNEL__
+# ifndef __ASSEMBLY__
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+/* Hardware Page Table Entry */
+typedef struct _PTE {
+ unsigned long v:1; /* Entry is valid */
+ unsigned long vsid:24; /* Virtual segment identifier */
+ unsigned long h:1; /* Hash algorithm indicator */
+ unsigned long api:6; /* Abbreviated page index */
+ unsigned long rpn:20; /* Real (physical) page number */
+ unsigned long :3; /* Unused */
+ unsigned long r:1; /* Referenced */
+ unsigned long c:1; /* Changed */
+ unsigned long w:1; /* Write-thru cache mode */
+ unsigned long i:1; /* Cache inhibited */
+ unsigned long m:1; /* Memory coherence */
+ unsigned long g:1; /* Guarded */
+ unsigned long :1; /* Unused */
+ unsigned long pp:2; /* Page protection */
+} PTE;
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+# define PP_RWXX 0 /* Supervisor read/write, User none */
+# define PP_RWRX 1 /* Supervisor read/write, User read */
+# define PP_RWRW 2 /* Supervisor read/write, User read/write */
+# define PP_RXRX 3 /* Supervisor read, User read */
+
+/* Segment Register */
+typedef struct _SEGREG {
+ unsigned long t:1; /* Normal or I/O type */
+ unsigned long ks:1; /* Supervisor 'key' (normally 0) */
+ unsigned long kp:1; /* User 'key' (normally 1) */
+ unsigned long n:1; /* No-execute */
+ unsigned long :4; /* Unused */
+ unsigned long vsid:24; /* Virtual Segment Identifier */
+} SEGREG;
+
+extern void _tlbie(unsigned long va); /* invalidate a TLB entry */
+extern void _tlbia(void); /* invalidate all TLB entries */
+# endif /* __ASSEMBLY__ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively.
+ */
+
+# define MICROBLAZE_TLB_SIZE 64
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion. The data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searching using the MTS and MFS instructions.
+ */
+
+# define TLB_LO 1
+# define TLB_HI 0
+# define TLB_DATA TLB_LO
+# define TLB_TAG TLB_HI
+
+/* Tag portion */
+# define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */
+# define TLB_PAGESZ_MASK 0x00000380
+# define TLB_PAGESZ(x) (((x) & 0x7) << 7)
+# define PAGESZ_1K 0
+# define PAGESZ_4K 1
+# define PAGESZ_16K 2
+# define PAGESZ_64K 3
+# define PAGESZ_256K 4
+# define PAGESZ_1M 5
+# define PAGESZ_4M 6
+# define PAGESZ_16M 7
+# define TLB_VALID 0x00000040 /* Entry is valid */
+
+/* Data portion */
+# define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */
+# define TLB_PERM_MASK 0x00000300
+# define TLB_EX 0x00000200 /* Instruction execution allowed */
+# define TLB_WR 0x00000100 /* Writes permitted */
+# define TLB_ZSEL_MASK 0x000000F0
+# define TLB_ZSEL(x) (((x) & 0xF) << 4)
+# define TLB_ATTR_MASK 0x0000000F
+# define TLB_W 0x00000008 /* Caching is write-through */
+# define TLB_I 0x00000004 /* Caching is inhibited */
+# define TLB_M 0x00000002 /* Memory is coherent */
+# define TLB_G 0x00000001 /* Memory is guarded from prefetch */
+
+# endif /* __KERNEL__ */
+# endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_MMU_H */
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
index 150ca01b74b..385fed16bbf 100644
--- a/arch/microblaze/include/asm/mmu_context.h
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -1,21 +1,5 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
-#define _ASM_MICROBLAZE_MMU_CONTEXT_H
-
-# define init_new_context(tsk, mm) ({ 0; })
-
-# define enter_lazy_tlb(mm, tsk) do {} while (0)
-# define change_mm_context(old, ctx, _pml4) do {} while (0)
-# define destroy_context(mm) do {} while (0)
-# define deactivate_mm(tsk, mm) do {} while (0)
-# define switch_mm(prev, next, tsk) do {} while (0)
-# define activate_mm(prev, next) do {} while (0)
-
-#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
+#ifdef CONFIG_MMU
+# include "mmu_context_mm.h"
+#else
+# include "mmu_context_no.h"
+#endif
diff --git a/arch/microblaze/include/asm/mmu_context_mm.h b/arch/microblaze/include/asm/mmu_context_mm.h
new file mode 100644
index 00000000000..3e5c254e8d1
--- /dev/null
+++ b/arch/microblaze/include/asm/mmu_context_mm.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
+#define _ASM_MICROBLAZE_MMU_CONTEXT_H
+
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/mmu.h>
+#include <asm-generic/mm_hooks.h>
+
+# ifdef __KERNEL__
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs). We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table.
+ */
+# define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+ & 0xffffff)
+
+/*
+ MicroBlaze has 256 contexts, so we can just rotate through these
+ as a way of "switching" contexts. If the TID of the TLB is zero,
+ the PID/TID comparison is disabled, so we can use a TID of zero
+ to represent all kernel pages as shared among all contexts.
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+# define NO_CONTEXT 256
+# define LAST_CONTEXT 255
+# define FIRST_CONTEXT 1
+
+/*
+ * Set the current MMU context.
+ * This is done byloading up the segment registers for the user part of the
+ * address space.
+ *
+ * Since the PGD is immediately available, it is much faster to simply
+ * pass this along as a second parameter, which is required for 8xx and
+ * can be used for debugging on all processors (if you happen to have
+ * an Abatron).
+ */
+extern void set_context(mm_context_t context, pgd_t *pgd);
+
+/*
+ * Bitmap of contexts in use.
+ * The size of this bitmap is LAST_CONTEXT + 1 bits.
+ */
+extern unsigned long context_map[];
+
+/*
+ * This caches the next context number that we expect to be free.
+ * Its use is an optimization only, we can't rely on this context
+ * number to be free, but it usually will be.
+ */
+extern mm_context_t next_mmu_context;
+
+/*
+ * Since we don't have sufficient contexts to give one to every task
+ * that could be in the system, we need to be able to steal contexts.
+ * These variables support that.
+ */
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+
+/*
+ * Get a new mmu context for the address space described by `mm'.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+ mm_context_t ctx;
+
+ if (mm->context != NO_CONTEXT)
+ return;
+ while (atomic_dec_if_positive(&nr_free_contexts) < 0)
+ steal_context();
+ ctx = next_mmu_context;
+ while (test_and_set_bit(ctx, context_map)) {
+ ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+ if (ctx > LAST_CONTEXT)
+ ctx = 0;
+ }
+ next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+ mm->context = ctx;
+ context_mm[ctx] = mm;
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+# define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * We're finished using the context for an address space.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+ if (mm->context != NO_CONTEXT) {
+ clear_bit(mm->context, context_map);
+ mm->context = NO_CONTEXT;
+ atomic_inc(&nr_free_contexts);
+ }
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ tsk->thread.pgdir = next->pgd;
+ get_mmu_context(next);
+ set_context(next->context, next->pgd);
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_mm(struct mm_struct *active_mm,
+ struct mm_struct *mm)
+{
+ current->thread.pgdir = mm->pgd;
+ get_mmu_context(mm);
+ set_context(mm->context, mm->pgd);
+}
+
+extern void mmu_context_init(void);
+
+# endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h
new file mode 100644
index 00000000000..ba556719015
--- /dev/null
+++ b/arch/microblaze/include/asm/mmu_context_no.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
+#define _ASM_MICROBLAZE_MMU_CONTEXT_H
+
+# define init_new_context(tsk, mm) ({ 0; })
+
+# define enter_lazy_tlb(mm, tsk) do {} while (0)
+# define change_mm_context(old, ctx, _pml4) do {} while (0)
+# define destroy_context(mm) do {} while (0)
+# define deactivate_mm(tsk, mm) do {} while (0)
+# define switch_mm(prev, next, tsk) do {} while (0)
+# define activate_mm(prev, next) do {} while (0)
+
+#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index 7238dcfcc51..210e584974f 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -1,6 +1,8 @@
/*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * VM ops
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
* Changes for MMU support:
* Copyright (C) 2007 Xilinx, Inc. All rights reserved.
@@ -15,14 +17,15 @@
#include <linux/pfn.h>
#include <asm/setup.h>
+#include <linux/const.h>
+
+#ifdef __KERNEL__
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT (12)
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
-#ifdef __KERNEL__
-
#ifndef __ASSEMBLY__
#define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
@@ -35,6 +38,7 @@
/* align addr on a size boundary - adjust address up if needed */
#define _ALIGN(addr, size) _ALIGN_UP(addr, size)
+#ifndef CONFIG_MMU
/*
* PAGE_OFFSET -- the first address of the first page of memory. When not
* using MMU this corresponds to the first free page in physical memory (aligned
@@ -43,15 +47,44 @@
extern unsigned int __page_offset;
#define PAGE_OFFSET __page_offset
-#define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
-#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr) free_page(addr)
+#else /* CONFIG_MMU */
-#define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE)
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory. With MMU
+ * it is set to the kernel start address (aligned on a page boundary).
+ *
+ * CONFIG_KERNEL_START is defined in arch/microblaze/config.in and used
+ * in arch/microblaze/Makefile.
+ */
+#define PAGE_OFFSET CONFIG_KERNEL_START
+/*
+ * MAP_NR -- given an address, calculate the index of the page struct which
+ * points to the address's page.
+ */
+#define MAP_NR(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT)
-#define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE)
-#define copy_user_page(vto, vfrom, vaddr, topg) \
+/*
+ * The basic type of a PTE - 32 bit physical addressing.
+ */
+typedef unsigned long pte_basic_t;
+#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */
+#define PTE_FMT "%.8lx"
+
+#endif /* CONFIG_MMU */
+
+# ifndef CONFIG_MMU
+# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
+# define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
+# define free_user_page(page, addr) free_page(addr)
+# else /* CONFIG_MMU */
+extern void copy_page(void *to, void *from);
+# endif /* CONFIG_MMU */
+
+# define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE)
+
+# define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE)
+# define copy_user_page(vto, vfrom, vaddr, topg) \
memcpy((vto), (vfrom), PAGE_SIZE)
/*
@@ -60,21 +93,32 @@ extern unsigned int __page_offset;
typedef struct page *pgtable_t;
typedef struct { unsigned long pte; } pte_t;
typedef struct { unsigned long pgprot; } pgprot_t;
+/* FIXME this can depend on linux kernel version */
+# ifdef CONFIG_MMU
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+# else /* CONFIG_MMU */
typedef struct { unsigned long ste[64]; } pmd_t;
typedef struct { pmd_t pue[1]; } pud_t;
typedef struct { pud_t pge[1]; } pgd_t;
+# endif /* CONFIG_MMU */
+# define pte_val(x) ((x).pte)
+# define pgprot_val(x) ((x).pgprot)
-#define pte_val(x) ((x).pte)
-#define pgprot_val(x) ((x).pgprot)
-#define pmd_val(x) ((x).ste[0])
-#define pud_val(x) ((x).pue[0])
-#define pgd_val(x) ((x).pge[0])
+# ifdef CONFIG_MMU
+# define pmd_val(x) ((x).pmd)
+# define pgd_val(x) ((x).pgd)
+# else /* CONFIG_MMU */
+# define pmd_val(x) ((x).ste[0])
+# define pud_val(x) ((x).pue[0])
+# define pgd_val(x) ((x).pge[0])
+# endif /* CONFIG_MMU */
-#define __pte(x) ((pte_t) { (x) })
-#define __pmd(x) ((pmd_t) { (x) })
-#define __pgd(x) ((pgd_t) { (x) })
-#define __pgprot(x) ((pgprot_t) { (x) })
+# define __pte(x) ((pte_t) { (x) })
+# define __pmd(x) ((pmd_t) { (x) })
+# define __pgd(x) ((pgd_t) { (x) })
+# define __pgprot(x) ((pgprot_t) { (x) })
/**
* Conversions for virtual address, physical address, pfn, and struct
@@ -94,44 +138,80 @@ extern unsigned long max_low_pfn;
extern unsigned long min_low_pfn;
extern unsigned long max_pfn;
-#define __pa(vaddr) ((unsigned long) (vaddr))
-#define __va(paddr) ((void *) (paddr))
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+extern unsigned long memory_size;
-#define phys_to_pfn(phys) (PFN_DOWN(phys))
-#define pfn_to_phys(pfn) (PFN_PHYS(pfn))
+extern int page_is_ram(unsigned long pfn);
-#define virt_to_pfn(vaddr) (phys_to_pfn((__pa(vaddr))))
-#define pfn_to_virt(pfn) __va(pfn_to_phys((pfn)))
+# define phys_to_pfn(phys) (PFN_DOWN(phys))
+# define pfn_to_phys(pfn) (PFN_PHYS(pfn))
-#define virt_to_page(vaddr) (pfn_to_page(virt_to_pfn(vaddr)))
-#define page_to_virt(page) (pfn_to_virt(page_to_pfn(page)))
+# define virt_to_pfn(vaddr) (phys_to_pfn((__pa(vaddr))))
+# define pfn_to_virt(pfn) __va(pfn_to_phys((pfn)))
-#define page_to_phys(page) (pfn_to_phys(page_to_pfn(page)))
-#define page_to_bus(page) (page_to_phys(page))
-#define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr)))
+# ifdef CONFIG_MMU
+# define virt_to_page(kaddr) (mem_map + MAP_NR(kaddr))
+# else /* CONFIG_MMU */
+# define virt_to_page(vaddr) (pfn_to_page(virt_to_pfn(vaddr)))
+# define page_to_virt(page) (pfn_to_virt(page_to_pfn(page)))
+# define page_to_phys(page) (pfn_to_phys(page_to_pfn(page)))
+# define page_to_bus(page) (page_to_phys(page))
+# define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr)))
+# endif /* CONFIG_MMU */
-extern unsigned int memory_start;
-extern unsigned int memory_end;
-extern unsigned int memory_size;
+# ifndef CONFIG_MMU
+# define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) <= max_mapnr)
+# define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT)
+# else /* CONFIG_MMU */
+# define ARCH_PFN_OFFSET (memory_start >> PAGE_SHIFT)
+# define pfn_valid(pfn) ((pfn) < (max_mapnr + ARCH_PFN_OFFSET))
+# define VALID_PAGE(page) ((page - mem_map) < max_mapnr)
+# endif /* CONFIG_MMU */
-#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_mapnr)
+# endif /* __ASSEMBLY__ */
-#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT)
+#define virt_addr_valid(vaddr) (pfn_valid(virt_to_pfn(vaddr)))
-#else
-#define tophys(rd, rs) (addik rd, rs, 0)
-#define tovirt(rd, rs) (addik rd, rs, 0)
-#endif /* __ASSEMBLY__ */
-#define virt_addr_valid(vaddr) (pfn_valid(virt_to_pfn(vaddr)))
+# ifndef CONFIG_MMU
+# define __pa(vaddr) ((unsigned long) (vaddr))
+# define __va(paddr) ((void *) (paddr))
+# else /* CONFIG_MMU */
+# define __pa(x) __virt_to_phys((unsigned long)(x))
+# define __va(x) ((void *)__phys_to_virt((unsigned long)(x)))
+# endif /* CONFIG_MMU */
+
-/* Convert between virtual and physical address for MMU. */
-/* Handle MicroBlaze processor with virtual memory. */
+/* Convert between virtual and physical address for MMU. */
+/* Handle MicroBlaze processor with virtual memory. */
+#ifndef CONFIG_MMU
#define __virt_to_phys(addr) addr
#define __phys_to_virt(addr) addr
+#define tophys(rd, rs) addik rd, rs, 0
+#define tovirt(rd, rs) addik rd, rs, 0
+#else
+#define __virt_to_phys(addr) \
+ ((addr) + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
+#define __phys_to_virt(addr) \
+ ((addr) + CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
+#define tophys(rd, rs) \
+ addik rd, rs, (CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
+#define tovirt(rd, rs) \
+ addik rd, rs, (CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
+#endif /* CONFIG_MMU */
#define TOPHYS(addr) __virt_to_phys(addr)
+#ifdef CONFIG_MMU
+#ifdef CONFIG_CONTIGUOUS_PAGE_ALLOC
+#define WANT_PAGE_VIRTUAL 1 /* page alloc 2 relies on this */
+#endif
+
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#endif /* CONFIG_MMU */
+
#endif /* __KERNEL__ */
#include <asm-generic/memory_model.h>
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index 2a4b3548401..59a757e46ba 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -9,6 +11,195 @@
#ifndef _ASM_MICROBLAZE_PGALLOC_H
#define _ASM_MICROBLAZE_PGALLOC_H
+#ifdef CONFIG_MMU
+
+#include <linux/kernel.h> /* For min/max macros */
+#include <linux/highmem.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define PGDIR_ORDER 0
+
+/*
+ * This is handled very differently on MicroBlaze since out page tables
+ * are all 0's and I want to be able to use these zero'd pages elsewhere
+ * as well - it gives us quite a speedup.
+ * -- Cort
+ */
+extern struct pgtable_cache_struct {
+ unsigned long *pgd_cache;
+ unsigned long *pte_cache;
+ unsigned long pgtable_cache_sz;
+} quicklists;
+
+#define pgd_quicklist (quicklists.pgd_cache)
+#define pmd_quicklist ((unsigned long *)0)
+#define pte_quicklist (quicklists.pte_cache)
+#define pgtable_cache_size (quicklists.pgtable_cache_sz)
+
+extern unsigned long *zero_cache; /* head linked list of pre-zero'd pages */
+extern atomic_t zero_sz; /* # currently pre-zero'd pages */
+extern atomic_t zeropage_hits; /* # zero'd pages request that we've done */
+extern atomic_t zeropage_calls; /* # zero'd pages request that've been made */
+extern atomic_t zerototal; /* # pages zero'd over time */
+
+#define zero_quicklist (zero_cache)
+#define zero_cache_sz (zero_sz)
+#define zero_cache_calls (zeropage_calls)
+#define zero_cache_hits (zeropage_hits)
+#define zero_cache_total (zerototal)
+
+/*
+ * return a pre-zero'd page from the list,
+ * return NULL if none available -- Cort
+ */
+extern unsigned long get_zero_page_fast(void);
+
+extern void __bad_pte(pmd_t *pmd);
+
+extern inline pgd_t *get_pgd_slow(void)
+{
+ pgd_t *ret;
+
+ ret = (pgd_t *)__get_free_pages(GFP_KERNEL, PGDIR_ORDER);
+ if (ret != NULL)
+ clear_page(ret);
+ return ret;
+}
+
+extern inline pgd_t *get_pgd_fast(void)
+{
+ unsigned long *ret;
+
+ ret = pgd_quicklist;
+ if (ret != NULL) {
+ pgd_quicklist = (unsigned long *)(*ret);
+ ret[0] = 0;
+ pgtable_cache_size--;
+ } else
+ ret = (unsigned long *)get_pgd_slow();
+ return (pgd_t *)ret;
+}
+
+extern inline void free_pgd_fast(pgd_t *pgd)
+{
+ *(unsigned long **)pgd = pgd_quicklist;
+ pgd_quicklist = (unsigned long *) pgd;
+ pgtable_cache_size++;
+}
+
+extern inline void free_pgd_slow(pgd_t *pgd)
+{
+ free_page((unsigned long)pgd);
+}
+
+#define pgd_free(mm, pgd) free_pgd_fast(pgd)
+#define pgd_alloc(mm) get_pgd_fast()
+
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); })
+#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); })
+/* FIXME two definition - look below */
+#define pmd_free(mm, x) do { } while (0)
+#define pgd_populate(mm, pmd, pte) BUG()
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+ unsigned long address)
+{
+ pte_t *pte;
+ extern int mem_init_done;
+ extern void *early_get_page(void);
+ if (mem_init_done) {
+ pte = (pte_t *)__get_free_page(GFP_KERNEL |
+ __GFP_REPEAT | __GFP_ZERO);
+ } else {
+ pte = (pte_t *)early_get_page();
+ if (pte)
+ clear_page(pte);
+ }
+ return pte;
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
+{
+ struct page *ptepage;
+
+#ifdef CONFIG_HIGHPTE
+ int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
+#else
+ int flags = GFP_KERNEL | __GFP_REPEAT;
+#endif
+
+ ptepage = alloc_pages(flags, 0);
+ if (ptepage)
+ clear_highpage(ptepage);
+ return ptepage;
+}
+
+static inline pte_t *pte_alloc_one_fast(struct mm_struct *mm,
+ unsigned long address)
+{
+ unsigned long *ret;
+
+ ret = pte_quicklist;
+ if (ret != NULL) {
+ pte_quicklist = (unsigned long *)(*ret);
+ ret[0] = 0;
+ pgtable_cache_size--;
+ }
+ return (pte_t *)ret;
+}
+
+extern inline void pte_free_fast(pte_t *pte)
+{
+ *(unsigned long **)pte = pte_quicklist;
+ pte_quicklist = (unsigned long *) pte;
+ pgtable_cache_size++;
+}
+
+extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ free_page((unsigned long)pte);
+}
+
+extern inline void pte_free_slow(struct page *ptepage)
+{
+ __free_page(ptepage);
+}
+
+extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
+{
+ __free_page(ptepage);
+}
+
+#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
+
+#define pmd_populate(mm, pmd, pte) (pmd_val(*(pmd)) = page_address(pte))
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+ (pmd_val(*(pmd)) = (unsigned long) (pte))
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); })
+/*#define pmd_free(mm, x) do { } while (0)*/
+#define __pmd_free_tlb(tlb, x) do { } while (0)
+#define pgd_populate(mm, pmd, pte) BUG()
+
+extern int do_check_pgt_cache(int, int);
+
+#endif /* CONFIG_MMU */
+
#define check_pgt_cache() do {} while (0)
#endif /* _ASM_MICROBLAZE_PGALLOC_H */
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 4df31e46568..4c57a586a98 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -14,6 +16,8 @@
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
remap_pfn_range(vma, vaddr, pfn, size, prot)
+#ifndef CONFIG_MMU
+
#define pgd_present(pgd) (1) /* pages are always present on non MMU */
#define pgd_none(pgd) (0)
#define pgd_bad(pgd) (0)
@@ -27,6 +31,8 @@
#define PAGE_READONLY __pgprot(0) /* these mean nothing to non MMU */
#define PAGE_KERNEL __pgprot(0) /* these mean nothing to non MMU */
+#define pgprot_noncached(x) (x)
+
#define __swp_type(x) (0)
#define __swp_offset(x) (0)
#define __swp_entry(typ, off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
@@ -45,6 +51,538 @@ static inline int pte_file(pte_t pte) { return 0; }
#define arch_enter_lazy_cpu_mode() do {} while (0)
+#else /* CONFIG_MMU */
+
+#include <asm-generic/4level-fixup.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h> /* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+#define FIRST_USER_ADDRESS 0
+
+extern unsigned long va_to_phys(unsigned long address);
+extern pte_t *va_to_pte(unsigned long address);
+extern unsigned long ioremap_bot, ioremap_base;
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+
+static inline int pte_special(pte_t pte) { return 0; }
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+/* Start and end of the vmalloc area. */
+/* Make sure to map the vmalloc area above the pinned kernel memory area
+ of 32Mb. */
+#define VMALLOC_START (CONFIG_KERNEL_START + \
+ max(32 * 1024 * 1024UL, memory_size))
+#define VMALLOC_END ioremap_bot
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The MicroBlaze MMU is identical to the PPC-40x MMU, and uses a hash
+ * table containing PTEs, together with a set of 16 segment registers, to
+ * define the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings. We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code. Low-level assembler code in hashtable.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively (see "mmu.h" for definitions).
+ */
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
+ *
+ */
+
+/* PMD_SHIFT determines the size of the area mapped by the PTE pages */
+#define PMD_SHIFT (PAGE_SHIFT + PTE_SHIFT)
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT PMD_SHIFT
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#define PTRS_PER_PTE (1 << PTE_SHIFT)
+#define PTRS_PER_PMD 1
+#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_PGD_NR 0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+
+#define pte_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pte "PTE_FMT".\n", \
+ __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \
+ __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+ __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Bits in a linux-style PTE. These match the bits in the
+ * (hardware-defined) PTE as closely as possible.
+ */
+
+/* There are several potential gotchas here. The hardware TLBLO
+ * field looks like this:
+ *
+ * 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * RPN..................... 0 0 EX WR ZSEL....... W I M G
+ *
+ * Where possible we make the Linux PTE bits match up with this
+ *
+ * - bits 20 and 21 must be cleared, because we use 4k pages (4xx can
+ * support down to 1k pages), this is done in the TLBMiss exception
+ * handler.
+ * - We use only zones 0 (for kernel pages) and 1 (for user pages)
+ * of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
+ * miss handler. Bit 27 is PAGE_USER, thus selecting the correct
+ * zone.
+ * - PRESENT *must* be in the bottom two bits because swap cache
+ * entries use the top 30 bits. Because 4xx doesn't support SMP
+ * anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
+ * is cleared in the TLB miss handler before the TLB entry is loaded.
+ * - All other bits of the PTE are loaded into TLBLO without
+ * * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+ * software PTE bits. We actually use use bits 21, 24, 25, and
+ * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+ * PRESENT.
+ */
+
+/* Definitions for MicroBlaze. */
+#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
+#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
+#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
+#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
+#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
+#define _PAGE_RW 0x040 /* software: Writes permitted */
+#define _PAGE_DIRTY 0x080 /* software: dirty page */
+#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
+#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
+#define _PMD_PRESENT PAGE_MASK
+
+/*
+ * Some bits are unused...
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE 0
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK 0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED 0
+#endif
+#ifndef _PAGE_HWWRITE
+#define _PAGE_HWWRITE 0
+#endif
+#ifndef _PAGE_HWEXEC
+#define _PAGE_HWEXEC 0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC 0
+#endif
+
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+/*
+ * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
+ * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
+ * to have it in the Linux PTE, and in fact the bit could be reused for
+ * another purpose. -- paulus.
+ */
+#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
+#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
+
+#define _PAGE_KERNEL \
+ (_PAGE_BASE | _PAGE_WRENABLE | _PAGE_SHARED | _PAGE_HWEXEC)
+
+#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+
+#define PAGE_NONE __pgprot(_PAGE_BASE)
+#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X \
+ __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define PAGE_KERNEL __pgprot(_PAGE_KERNEL)
+#define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_SHARED)
+#define PAGE_KERNEL_CI __pgprot(_PAGE_IO)
+
+/*
+ * We consider execute permission the same as read.
+ * Also, write permissions imply read permissions.
+ */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY_X
+#define __P010 PAGE_COPY
+#define __P011 PAGE_COPY_X
+#define __P100 PAGE_READONLY
+#define __P101 PAGE_READONLY_X
+#define __P110 PAGE_COPY
+#define __P111 PAGE_COPY_X
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY_X
+#define __S010 PAGE_SHARED
+#define __S011 PAGE_SHARED_X
+#define __S100 PAGE_READONLY
+#define __S101 PAGE_READONLY_X
+#define __S110 PAGE_SHARED
+#define __S111 PAGE_SHARED_X
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[1024];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* __ASSEMBLY__ */
+
+#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
+#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
+#define pte_clear(mm, addr, ptep) \
+ do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+
+#define pmd_none(pmd) (!pmd_val(pmd))
+#define pmd_bad(pmd) ((pmd_val(pmd) & _PMD_PRESENT) == 0)
+#define pmd_present(pmd) ((pmd_val(pmd) & _PMD_PRESENT) != 0)
+#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0)
+
+#define pte_page(x) (mem_map + (unsigned long) \
+ ((pte_val(x) - memory_start) >> PAGE_SHIFT))
+#define PFN_SHIFT_OFFSET (PAGE_SHIFT)
+
+#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET)
+
+#define pfn_pte(pfn, prot) \
+ __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) | pgprot_val(prot))
+
+#ifndef __ASSEMBLY__
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd) { return 0; }
+static inline int pgd_bad(pgd_t pgd) { return 0; }
+static inline int pgd_present(pgd_t pgd) { return 1; }
+#define pgd_clear(xp) do { } while (0)
+#define pgd_page(pgd) \
+ ((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
+static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+/* FIXME */
+static inline int pte_file(pte_t pte) { return 0; }
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_rdprotect(pte_t pte) \
+ { pte_val(pte) &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) \
+ { pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_exprotect(pte_t pte) \
+ { pte_val(pte) &= ~_PAGE_EXEC; return pte; }
+static inline pte_t pte_mkclean(pte_t pte) \
+ { pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) \
+ { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte) \
+ { pte_val(pte) |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) \
+ { pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) \
+ { pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) \
+ { pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) \
+ { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+static inline pte_t mk_pte_phys(phys_addr_t physpage, pgprot_t pgprot)
+{
+ pte_t pte;
+ pte_val(pte) = physpage | pgprot_val(pgprot);
+ return pte;
+}
+
+#define mk_pte(page, pgprot) \
+({ \
+ pte_t pte; \
+ pte_val(pte) = (((page - mem_map) << PAGE_SHIFT) + memory_start) | \
+ pgprot_val(pgprot); \
+ pte; \
+})
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+ return pte;
+}
+
+/*
+ * Atomic PTE updates.
+ *
+ * pte_update clears and sets bit atomically, and returns
+ * the old pte value.
+ * The ((unsigned long)(p+1) - 4) hack is to get to the least-significant
+ * 32 bits of the PTE regardless of whether PTEs are 32 or 64 bits.
+ */
+static inline unsigned long pte_update(pte_t *p, unsigned long clr,
+ unsigned long set)
+{
+ unsigned long old, tmp, msr;
+
+ __asm__ __volatile__("\
+ msrclr %2, 0x2\n\
+ nop\n\
+ lw %0, %4, r0\n\
+ andn %1, %0, %5\n\
+ or %1, %1, %6\n\
+ sw %1, %4, r0\n\
+ mts rmsr, %2\n\
+ nop"
+ : "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
+ : "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p)
+ : "cc");
+
+ return old;
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ */
+static inline void set_pte(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+ *ptep = pte;
+}
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+ *ptep = pte;
+}
+
+static inline int ptep_test_and_clear_young(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ return (pte_update(ptep, _PAGE_ACCESSED, 0) & _PAGE_ACCESSED) != 0;
+}
+
+static inline int ptep_test_and_clear_dirty(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ return (pte_update(ptep, \
+ (_PAGE_DIRTY | _PAGE_HWWRITE), 0) & _PAGE_DIRTY) != 0;
+}
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+/*static inline void ptep_set_wrprotect(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+}*/
+
+static inline void ptep_mkdirty(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ pte_update(ptep, 0, _PAGE_DIRTY);
+}
+
+/*#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)*/
+
+/* Convert pmd entry to page */
+/* our pmd entry is an effective address of pte table*/
+/* returns effective address of the pmd entry*/
+#define pmd_page_kernel(pmd) ((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+
+/* returns struct *page of the pmd entry*/
+#define pmd_page(pmd) (pfn_to_page(__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
+{
+ return (pmd_t *) dir;
+}
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address) \
+ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, addr) \
+ ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir, addr) \
+ ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
+#define pte_offset_map_nested(dir, addr) \
+ ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
+
+#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS 29
+#define pte_to_pgoff(pte) (pte_val(pte) >> 3)
+#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) })
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/*
+ * When flushing the tlb entry for a page, we also need to flush the hash
+ * table entry. flush_hash_page is assembler (for speed) in hashtable.S.
+ */
+extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep);
+
+/* Add an HPTE to the hash table */
+extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
+
+/*
+ * Encode and decode a swap entry.
+ * Note that the bits we use in a PTE for representing a swap entry
+ * must not include the _PAGE_PRESENT bit, or the _PAGE_HASHPTE bit
+ * (if used). -- paulus
+ */
+#define __swp_type(entry) ((entry).val & 0x3f)
+#define __swp_offset(entry) ((entry).val >> 6)
+#define __swp_entry(type, offset) \
+ ((swp_entry_t) { (type) | ((offset) << 6) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 2 })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 2 })
+
+
+/* CONFIG_APUS */
+/* For virtual address to physical address conversion */
+extern void cache_clear(__u32 addr, int length);
+extern void cache_push(__u32 addr, int length);
+extern int mm_end_of_chunk(unsigned long addr, int len);
+extern unsigned long iopa(unsigned long addr);
+/* extern unsigned long mm_ptov(unsigned long addr) \
+ __attribute__ ((const)); TBD */
+
+/* Values for nocacheflag and cmode */
+/* These are not used by the APUS kernel_map, but prevents
+ * compilation errors.
+ */
+#define IOMAP_FULL_CACHING 0
+#define IOMAP_NOCACHE_SER 1
+#define IOMAP_NOCACHE_NONSER 2
+#define IOMAP_NO_COPYBACK 3
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
+ int nocacheflag, unsigned long *memavailp);
+
+/*
+ * Set cache mode of (kernel space) address range.
+ */
+extern void kernel_set_cachemode(unsigned long address, unsigned long size,
+ unsigned int cmode);
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr) (1)
+
+#define io_remap_page_range remap_page_range
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init() do { } while (0)
+
+void do_page_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code);
+
+void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
+ unsigned int size, int flags);
+
+void __init adjust_total_lowmem(void);
+void mapin_ram(void);
+int map_page(unsigned long va, phys_addr_t pa, int flags);
+
+extern int mem_init_done;
+extern unsigned long ioremap_base;
+extern unsigned long ioremap_bot;
+
+asmlinkage void __init mmu_init(void);
+
+void __init *early_get_page(void);
+
+void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
+void consistent_free(void *vaddr);
+void consistent_sync(void *vaddr, size_t size, int direction);
+void consistent_sync_page(struct page *page, unsigned long offset,
+ size_t size, int direction);
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* CONFIG_MMU */
+
#ifndef __ASSEMBLY__
#include <asm-generic/pgtable.h>
diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h
index b4df41c5dde..8c758b231f3 100644
--- a/arch/microblaze/include/asm/posix_types.h
+++ b/arch/microblaze/include/asm/posix_types.h
@@ -16,7 +16,7 @@
*/
typedef unsigned long __kernel_ino_t;
-typedef unsigned int __kernel_mode_t;
+typedef unsigned short __kernel_mode_t;
typedef unsigned int __kernel_nlink_t;
typedef long __kernel_off_t;
typedef int __kernel_pid_t;
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index 9329029d261..563c6b9453f 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -1,6 +1,6 @@
/*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -26,14 +26,15 @@ extern const struct seq_operations cpuinfo_op;
# define cpu_sleep() do {} while (0)
# define prepare_to_copy(tsk) do {} while (0)
-# endif /* __ASSEMBLY__ */
-
#define task_pt_regs(tsk) \
(((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
/* Do necessary setup to start up a newly executed thread. */
void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
+# endif /* __ASSEMBLY__ */
+
+# ifndef CONFIG_MMU
/*
* User space process size: memory size
*
@@ -85,4 +86,90 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
# define KSTK_EIP(tsk) (0)
# define KSTK_ESP(tsk) (0)
+# else /* CONFIG_MMU */
+
+/*
+ * This is used to define STACK_TOP, and with MMU it must be below
+ * kernel base to select the correct PGD when handling MMU exceptions.
+ */
+# define TASK_SIZE (CONFIG_KERNEL_START)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+# define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3)
+
+# define THREAD_KSP 0
+
+# ifndef __ASSEMBLY__
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+# define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+/* If you change this, you must change the associated assembly-languages
+ * constants defined below, THREAD_*.
+ */
+struct thread_struct {
+ /* kernel stack pointer (must be first field in structure) */
+ unsigned long ksp;
+ unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */
+ void *pgdir; /* root of page-table tree */
+ struct pt_regs *regs; /* Pointer to saved register state */
+};
+
+# define INIT_THREAD { \
+ .ksp = sizeof init_stack + (unsigned long)init_stack, \
+ .pgdir = swapper_pg_dir, \
+}
+
+/* Do necessary setup to start up a newly executed thread. */
+void start_thread(struct pt_regs *regs,
+ unsigned long pc, unsigned long usp);
+
+/* Free all resources held by a thread. */
+extern inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Free current thread data structures etc. */
+static inline void exit_thread(void)
+{
+}
+
+/* Return saved (kernel) PC of a blocked thread. */
+# define thread_saved_pc(tsk) \
+ ((tsk)->thread.regs ? (tsk)->thread.regs->r15 : 0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+/* The size allocated for kernel stacks. This _must_ be a power of two! */
+# define KERNEL_STACK_SIZE 0x2000
+
+/* Return some info about the user process TASK. */
+# define task_tos(task) ((unsigned long)(task) + KERNEL_STACK_SIZE)
+# define task_regs(task) ((struct pt_regs *)task_tos(task) - 1)
+
+# define task_pt_regs_plus_args(tsk) \
+ (((void *)task_pt_regs(tsk)) - STATE_SAVE_ARG_SPACE)
+
+# define task_sp(task) (task_regs(task)->r1)
+# define task_pc(task) (task_regs(task)->pc)
+/* Grotty old names for some. */
+# define KSTK_EIP(task) (task_pc(task))
+# define KSTK_ESP(task) (task_sp(task))
+
+/* FIXME */
+# define deactivate_mm(tsk, mm) do { } while (0)
+
+# define STACK_TOP TASK_SIZE
+# define STACK_TOP_MAX STACK_TOP
+
+# endif /* __ASSEMBLY__ */
+# endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_PROCESSOR_H */
diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h
index 55015bce5e4..a917dc51773 100644
--- a/arch/microblaze/include/asm/ptrace.h
+++ b/arch/microblaze/include/asm/ptrace.h
@@ -10,7 +10,6 @@
#define _ASM_MICROBLAZE_PTRACE_H
#ifndef __ASSEMBLY__
-#include <linux/types.h>
typedef unsigned long microblaze_reg_t;
diff --git a/arch/microblaze/include/asm/registers.h b/arch/microblaze/include/asm/registers.h
index 834142d9356..68c3afb7387 100644
--- a/arch/microblaze/include/asm/registers.h
+++ b/arch/microblaze/include/asm/registers.h
@@ -1,6 +1,6 @@
/*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -30,4 +30,21 @@
#define FSR_UF (1<<1) /* Underflow */
#define FSR_DO (1<<0) /* Denormalized operand error */
+# ifdef CONFIG_MMU
+/* Machine State Register (MSR) Fields */
+# define MSR_UM (1<<11) /* User Mode */
+# define MSR_UMS (1<<12) /* User Mode Save */
+# define MSR_VM (1<<13) /* Virtual Mode */
+# define MSR_VMS (1<<14) /* Virtual Mode Save */
+
+# define MSR_KERNEL (MSR_EE | MSR_VM)
+/* # define MSR_USER (MSR_KERNEL | MSR_UM | MSR_IE) */
+# define MSR_KERNEL_VMS (MSR_EE | MSR_VMS)
+/* # define MSR_USER_VMS (MSR_KERNEL_VMS | MSR_UMS | MSR_IE) */
+
+/* Exception State Register (ESR) Fields */
+# define ESR_DIZ (1<<11) /* Zone Protection */
+# define ESR_S (1<<10) /* Store instruction */
+
+# endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_REGISTERS_H */
diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h
index 8434a43e542..4487e150b45 100644
--- a/arch/microblaze/include/asm/sections.h
+++ b/arch/microblaze/include/asm/sections.h
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -14,6 +16,7 @@
# ifndef __ASSEMBLY__
extern char _ssbss[], _esbss[];
extern unsigned long __ivt_start[], __ivt_end[];
+extern char _etext[], _stext[];
# ifdef CONFIG_MTD_UCLINUX
extern char *_ebss;
diff --git a/arch/microblaze/include/asm/segment.h b/arch/microblaze/include/asm/segment.h
index 7f5dcc56eea..0e7102c3fb1 100644
--- a/arch/microblaze/include/asm/segment.h
+++ b/arch/microblaze/include/asm/segment.h
@@ -1,6 +1,6 @@
/*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -11,7 +11,7 @@
#ifndef _ASM_MICROBLAZE_SEGMENT_H
#define _ASM_MICROBLAZE_SEGMENT_H
-#ifndef __ASSEMBLY__
+# ifndef __ASSEMBLY__
typedef struct {
unsigned long seg;
@@ -29,15 +29,21 @@ typedef struct {
*
* For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
*/
-# define KERNEL_DS ((mm_segment_t){0})
+# define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+# ifndef CONFIG_MMU
+# define KERNEL_DS MAKE_MM_SEG(0)
# define USER_DS KERNEL_DS
+# else
+# define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
+# define USER_DS MAKE_MM_SEG(TASK_SIZE - 1)
+# endif
# define get_ds() (KERNEL_DS)
# define get_fs() (current_thread_info()->addr_limit)
-# define set_fs(x) \
- do { current_thread_info()->addr_limit = (x); } while (0)
+# define set_fs(val) (current_thread_info()->addr_limit = (val))
-# define segment_eq(a, b) ((a).seg == (b).seg)
+# define segment_eq(a, b) ((a).seg == (b).seg)
# endif /* __ASSEMBLY__ */
#endif /* _ASM_MICROBLAZE_SEGMENT_H */
diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
index 9b98e8e6aba..27f8dafd8c3 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -18,7 +19,6 @@
extern unsigned int boot_cpuid; /* move to smp.h */
extern char cmd_line[COMMAND_LINE_SIZE];
-# endif/* __KERNEL__ */
void early_printk(const char *fmt, ...);
@@ -30,6 +30,11 @@ void setup_heartbeat(void);
unsigned long long sched_clock(void);
+# ifdef CONFIG_MMU
+extern void mmu_reset(void);
+extern void early_console_reg_tlb_alloc(unsigned int addr);
+# endif /* CONFIG_MMU */
+
void time_init(void);
void init_IRQ(void);
void machine_early_init(const char *cmdline, unsigned int ram,
@@ -40,5 +45,6 @@ void machine_shutdown(void);
void machine_halt(void);
void machine_power_off(void);
+# endif/* __KERNEL__ */
# endif /* __ASSEMBLY__ */
#endif /* _ASM_MICROBLAZE_SETUP_H */
diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h
index 5f18b8aed22..a15f77520bf 100644
--- a/arch/microblaze/include/asm/stat.h
+++ b/arch/microblaze/include/asm/stat.h
@@ -16,58 +16,53 @@
#include <linux/posix_types.h>
+#define STAT_HAVE_NSEC 1
+
struct stat {
- unsigned int st_dev;
+ unsigned long st_dev;
unsigned long st_ino;
unsigned int st_mode;
unsigned int st_nlink;
unsigned int st_uid;
unsigned int st_gid;
- unsigned int st_rdev;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long __unused1; /* unsigned long st_atime_nsec */
- unsigned long st_mtime;
- unsigned long __unused2; /* unsigned long st_mtime_nsec */
- unsigned long st_ctime;
- unsigned long __unused3; /* unsigned long st_ctime_nsec */
+ unsigned long st_rdev;
+ unsigned long __pad1;
+ long st_size;
+ int st_blksize;
+ int __pad2;
+ long st_blocks;
+ int st_atime;
+ unsigned int st_atime_nsec;
+ int st_mtime;
+ unsigned int st_mtime_nsec;
+ int st_ctime;
+ unsigned int st_ctime_nsec;
unsigned long __unused4;
unsigned long __unused5;
};
struct stat64 {
- unsigned long long st_dev;
- unsigned long __unused1;
-
- unsigned long long st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned int st_uid;
- unsigned int st_gid;
-
- unsigned long long st_rdev;
- unsigned long __unused3;
-
- long long st_size;
- unsigned long st_blksize;
-
- unsigned long st_blocks; /* No. of 512-byte blocks allocated */
- unsigned long __unused4; /* future possible st_blocks high bits */
-
- unsigned long st_atime;
- unsigned long st_atime_nsec;
-
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
-
- unsigned long __unused8;
+ unsigned long long st_dev; /* Device. */
+ unsigned long long st_ino; /* File serial number. */
+ unsigned int st_mode; /* File mode. */
+ unsigned int st_nlink; /* Link count. */
+ unsigned int st_uid; /* User ID of the file's owner. */
+ unsigned int st_gid; /* Group ID of the file's group. */
+ unsigned long long st_rdev; /* Device number, if device. */
+ unsigned long long __pad1;
+ long long st_size; /* Size of file, in bytes. */
+ int st_blksize; /* Optimal block size for I/O. */
+ int __pad2;
+ long long st_blocks; /* Number 512-byte blocks allocated. */
+ int st_atime; /* Time of last access. */
+ unsigned int st_atime_nsec;
+ int st_mtime; /* Time of last modification. */
+ unsigned int st_mtime_nsec;
+ int st_ctime; /* Time of last status change. */
+ unsigned int st_ctime_nsec;
+ unsigned int __unused4;
+ unsigned int __unused5;
};
#endif /* _ASM_MICROBLAZE_STAT_H */
+
diff --git a/arch/microblaze/include/asm/string.h b/arch/microblaze/include/asm/string.h
index f7728c90fc1..aec2f59298b 100644
--- a/arch/microblaze/include/asm/string.h
+++ b/arch/microblaze/include/asm/string.h
@@ -9,7 +9,7 @@
#ifndef _ASM_MICROBLAZE_STRING_H
#define _ASM_MICROBLAZE_STRING_H
-#ifndef __KERNEL__
+#ifdef __KERNEL__
#define __HAVE_ARCH_MEMSET
#define __HAVE_ARCH_MEMCPY
diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h
index 9cb4ff0edeb..ddea9eb31f8 100644
--- a/arch/microblaze/include/asm/syscalls.h
+++ b/arch/microblaze/include/asm/syscalls.h
@@ -34,6 +34,9 @@ asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
struct old_sigaction *oact);
+asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
+ struct sigaction __user *oact, size_t sigsetsize);
+
asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
struct pt_regs *regs);
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index 4c3943e3f40..7fac4449844 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -122,6 +122,8 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_SINGLESTEP 4
#define TIF_IRET 5 /* return with iret */
#define TIF_MEMDIE 6
+#define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */
+#define TIF_SECCOMP 10 /* secure computing */
#define TIF_FREEZE 14 /* Freezing for suspend */
/* FIXME change in entry.S */
@@ -138,10 +140,17 @@ static inline struct thread_info *current_thread_info(void)
#define _TIF_IRET (1<<TIF_IRET)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_FREEZE (1<<TIF_FREEZE)
+#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP (1 << TIF_SECCOMP)
#define _TIF_KERNEL_TRACE (1 << TIF_KERNEL_TRACE)
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+ _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK 0x0000FFFE
+
/* work to do on any return to u-space */
#define _TIF_ALLWORK_MASK 0x0000FFFF
@@ -154,6 +163,17 @@ static inline struct thread_info *current_thread_info(void)
*/
/* FPU was used by this task this quantum (SMP) */
#define TS_USEDFPU 0x0001
+#define TS_RESTORE_SIGMASK 0x0002
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+ struct thread_info *ti = current_thread_info();
+ ti->status |= TS_RESTORE_SIGMASK;
+ set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags);
+}
+#endif
#endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_THREAD_INFO_H */
diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h
index d1dfe379112..c472d280113 100644
--- a/arch/microblaze/include/asm/tlb.h
+++ b/arch/microblaze/include/asm/tlb.h
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -13,4 +15,10 @@
#include <asm-generic/tlb.h>
+#ifdef CONFIG_MMU
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+#endif
+
#endif /* _ASM_MICROBLAZE_TLB_H */
diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h
index d7fe7629001..eb31a0e8a77 100644
--- a/arch/microblaze/include/asm/tlbflush.h
+++ b/arch/microblaze/include/asm/tlbflush.h
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -9,6 +11,50 @@
#ifndef _ASM_MICROBLAZE_TLBFLUSH_H
#define _ASM_MICROBLAZE_TLBFLUSH_H
+#ifdef CONFIG_MMU
+
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h> /* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+#define __tlbia() _tlbia()
+
+static inline void local_flush_tlb_all(void)
+ { __tlbia(); }
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+ { __tlbia(); }
+static inline void local_flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long vmaddr)
+ { _tlbie(vmaddr); }
+static inline void local_flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+ { __tlbia(); }
+
+#define flush_tlb_kernel_range(start, end) do { } while (0)
+
+#define update_mmu_cache(vma, addr, pte) do { } while (0)
+
+#define flush_tlb_all local_flush_tlb_all
+#define flush_tlb_mm local_flush_tlb_mm
+#define flush_tlb_page local_flush_tlb_page
+#define flush_tlb_range local_flush_tlb_range
+
+/*
+ * This is called in munmap when we have freed up some page-table
+ * pages. We don't need to do anything here, there's nothing special
+ * about our page-table pages. -- paulus
+ */
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+ unsigned long start, unsigned long end) { }
+
+#else /* CONFIG_MMU */
+
#define flush_tlb() BUG()
#define flush_tlb_all() BUG()
#define flush_tlb_mm(mm) BUG()
@@ -17,4 +63,6 @@
#define flush_tlb_pgtables(mm, start, end) BUG()
#define flush_tlb_kernel_range(start, end) BUG()
+#endif /* CONFIG_MMU */
+
#endif /* _ASM_MICROBLAZE_TLBFLUSH_H */
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 5a3ffc308e1..65adad61e7e 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -26,6 +28,10 @@
#define VERIFY_READ 0
#define VERIFY_WRITE 1
+#define __clear_user(addr, n) (memset((void *)(addr), 0, (n)), 0)
+
+#ifndef CONFIG_MMU
+
extern int ___range_ok(unsigned long addr, unsigned long size);
#define __range_ok(addr, size) \
@@ -34,68 +40,68 @@ extern int ___range_ok(unsigned long addr, unsigned long size);
#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
#define __access_ok(add, size) (__range_ok((addr), (size)) == 0)
-extern inline int bad_user_access_length(void)
-{
- return 0;
-}
+/* Undefined function to trigger linker error */
+extern int bad_user_access_length(void);
+
/* FIXME this is function for optimalization -> memcpy */
-#define __get_user(var, ptr) \
- ({ \
- int __gu_err = 0; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- case 2: \
- case 4: \
- (var) = *(ptr); \
- break; \
- case 8: \
- memcpy((void *) &(var), (ptr), 8); \
- break; \
- default: \
- (var) = 0; \
- __gu_err = __get_user_bad(); \
- break; \
- } \
- __gu_err; \
- })
+#define __get_user(var, ptr) \
+({ \
+ int __gu_err = 0; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ case 2: \
+ case 4: \
+ (var) = *(ptr); \
+ break; \
+ case 8: \
+ memcpy((void *) &(var), (ptr), 8); \
+ break; \
+ default: \
+ (var) = 0; \
+ __gu_err = __get_user_bad(); \
+ break; \
+ } \
+ __gu_err; \
+})
#define __get_user_bad() (bad_user_access_length(), (-EFAULT))
+/* FIXME is not there defined __pu_val */
#define __put_user(var, ptr) \
- ({ \
- int __pu_err = 0; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- case 2: \
- case 4: \
- *(ptr) = (var); \
- break; \
- case 8: { \
- typeof(*(ptr)) __pu_val = var; \
- memcpy(ptr, &__pu_val, sizeof(__pu_val));\
- } \
- break; \
- default: \
- __pu_err = __put_user_bad(); \
- break; \
- } \
- __pu_err; \
- })
+({ \
+ int __pu_err = 0; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ case 2: \
+ case 4: \
+ *(ptr) = (var); \
+ break; \
+ case 8: { \
+ typeof(*(ptr)) __pu_val = (var); \
+ memcpy(ptr, &__pu_val, sizeof(__pu_val)); \
+ } \
+ break; \
+ default: \
+ __pu_err = __put_user_bad(); \
+ break; \
+ } \
+ __pu_err; \
+})
#define __put_user_bad() (bad_user_access_length(), (-EFAULT))
-#define put_user(x, ptr) __put_user(x, ptr)
-#define get_user(x, ptr) __get_user(x, ptr)
+#define put_user(x, ptr) __put_user((x), (ptr))
+#define get_user(x, ptr) __get_user((x), (ptr))
-#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
-#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n) (memcpy((to), (from), (n)), 0)
+#define copy_from_user(to, from, n) (memcpy((to), (from), (n)), 0)
-#define __copy_to_user(to, from, n) (copy_to_user(to, from, n))
-#define __copy_from_user(to, from, n) (copy_from_user(to, from, n))
-#define __copy_to_user_inatomic(to, from, n) (__copy_to_user(to, from, n))
-#define __copy_from_user_inatomic(to, from, n) (__copy_from_user(to, from, n))
-
-#define __clear_user(addr, n) (memset((void *)addr, 0, n), 0)
+#define __copy_to_user(to, from, n) (copy_to_user((to), (from), (n)))
+#define __copy_from_user(to, from, n) (copy_from_user((to), (from), (n)))
+#define __copy_to_user_inatomic(to, from, n) \
+ (__copy_to_user((to), (from), (n)))
+#define __copy_from_user_inatomic(to, from, n) \
+ (__copy_from_user((to), (from), (n)))
static inline unsigned long clear_user(void *addr, unsigned long size)
{
@@ -104,13 +110,200 @@ static inline unsigned long clear_user(void *addr, unsigned long size)
return size;
}
-/* Returns 0 if exception not found and fixup otherwise. */
+/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
+extern long strncpy_from_user(char *dst, const char *src, long count);
+extern long strnlen_user(const char *src, long count);
+
+#else /* CONFIG_MMU */
+
+/*
+ * Address is valid if:
+ * - "addr", "addr + size" and "size" are all below the limit
+ */
+#define access_ok(type, addr, size) \
+ (get_fs().seg > (((unsigned long)(addr)) | \
+ (size) | ((unsigned long)(addr) + (size))))
+
+/* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n",
+ type?"WRITE":"READ",addr,size,get_fs().seg)) */
+
+/*
+ * All the __XXX versions macros/functions below do not perform
+ * access checking. It is assumed that the necessary checks have been
+ * already performed before the finction (macro) is called.
+ */
+
+#define get_user(x, ptr) \
+({ \
+ access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) \
+ ? __get_user((x), (ptr)) : -EFAULT; \
+})
+
+#define put_user(x, ptr) \
+({ \
+ access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) \
+ ? __put_user((x), (ptr)) : -EFAULT; \
+})
+
+#define __get_user(x, ptr) \
+({ \
+ unsigned long __gu_val; \
+ /*unsigned long __gu_ptr = (unsigned long)(ptr);*/ \
+ long __gu_err; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __get_user_asm("lbu", (ptr), __gu_val, __gu_err); \
+ break; \
+ case 2: \
+ __get_user_asm("lhu", (ptr), __gu_val, __gu_err); \
+ break; \
+ case 4: \
+ __get_user_asm("lw", (ptr), __gu_val, __gu_err); \
+ break; \
+ default: \
+ __gu_val = 0; __gu_err = -EINVAL; \
+ } \
+ x = (__typeof__(*(ptr))) __gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \
+({ \
+ __asm__ __volatile__ ( \
+ "1:" insn " %1, %2, r0; \
+ addk %0, r0, r0; \
+ 2: \
+ .section .fixup,\"ax\"; \
+ 3: brid 2b; \
+ addik %0, r0, %3; \
+ .previous; \
+ .section __ex_table,\"a\"; \
+ .word 1b,3b; \
+ .previous;" \
+ : "=r"(__gu_err), "=r"(__gu_val) \
+ : "r"(__gu_ptr), "i"(-EFAULT) \
+ ); \
+})
+
+#define __put_user(x, ptr) \
+({ \
+ __typeof__(*(ptr)) __gu_val = x; \
+ long __gu_err = 0; \
+ switch (sizeof(__gu_val)) { \
+ case 1: \
+ __put_user_asm("sb", (ptr), __gu_val, __gu_err); \
+ break; \
+ case 2: \
+ __put_user_asm("sh", (ptr), __gu_val, __gu_err); \
+ break; \
+ case 4: \
+ __put_user_asm("sw", (ptr), __gu_val, __gu_err); \
+ break; \
+ case 8: \
+ __put_user_asm_8((ptr), __gu_val, __gu_err); \
+ break; \
+ default: \
+ __gu_err = -EINVAL; \
+ } \
+ __gu_err; \
+})
+
+#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err) \
+({ \
+__asm__ __volatile__ (" lwi %0, %1, 0; \
+ 1: swi %0, %2, 0; \
+ lwi %0, %1, 4; \
+ 2: swi %0, %2, 4; \
+ addk %0,r0,r0; \
+ 3: \
+ .section .fixup,\"ax\"; \
+ 4: brid 3b; \
+ addik %0, r0, %3; \
+ .previous; \
+ .section __ex_table,\"a\"; \
+ .word 1b,4b,2b,4b; \
+ .previous;" \
+ : "=&r"(__gu_err) \
+ : "r"(&__gu_val), \
+ "r"(__gu_ptr), "i"(-EFAULT) \
+ ); \
+})
+
+#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \
+({ \
+ __asm__ __volatile__ ( \
+ "1:" insn " %1, %2, r0; \
+ addk %0, r0, r0; \
+ 2: \
+ .section .fixup,\"ax\"; \
+ 3: brid 2b; \
+ addik %0, r0, %3; \
+ .previous; \
+ .section __ex_table,\"a\"; \
+ .word 1b,3b; \
+ .previous;" \
+ : "=r"(__gu_err) \
+ : "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \
+ ); \
+})
+
+/*
+ * Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail.
+ */
+static inline int clear_user(char *to, int size)
+{
+ if (size && access_ok(VERIFY_WRITE, to, size)) {
+ __asm__ __volatile__ (" \
+ 1: \
+ sb r0, %2, r0; \
+ addik %0, %0, -1; \
+ bneid %0, 1b; \
+ addik %2, %2, 1; \
+ 2: \
+ .section __ex_table,\"a\"; \
+ .word 1b,2b; \
+ .section .text;" \
+ : "=r"(size) \
+ : "0"(size), "r"(to)
+ );
+ }
+ return size;
+}
+
+extern unsigned long __copy_tofrom_user(void __user *to,
+ const void __user *from, unsigned long size);
+
+#define copy_to_user(to, from, n) \
+ (access_ok(VERIFY_WRITE, (to), (n)) ? \
+ __copy_tofrom_user((void __user *)(to), \
+ (__force const void __user *)(from), (n)) \
+ : -EFAULT)
+
+#define __copy_to_user(to, from, n) copy_to_user((to), (from), (n))
+#define __copy_to_user_inatomic(to, from, n) copy_to_user((to), (from), (n))
+
+#define copy_from_user(to, from, n) \
+ (access_ok(VERIFY_READ, (from), (n)) ? \
+ __copy_tofrom_user((__force void __user *)(to), \
+ (void __user *)(from), (n)) \
+ : -EFAULT)
+
+#define __copy_from_user(to, from, n) copy_from_user((to), (from), (n))
+#define __copy_from_user_inatomic(to, from, n) \
+ copy_from_user((to), (from), (n))
+
+extern int __strncpy_user(char *to, const char __user *from, int len);
+extern int __strnlen_user(const char __user *sstr, int len);
+
+#define strncpy_from_user(to, from, len) \
+ (access_ok(VERIFY_READ, from, 1) ? \
+ __strncpy_user(to, from, len) : -EFAULT)
+#define strnlen_user(str, len) \
+ (access_ok(VERIFY_READ, str, 1) ? __strnlen_user(str, len) : 0)
-extern long strncpy_from_user(char *dst, const char __user *src, long count);
-extern long strnlen_user(const char __user *src, long count);
-extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+#endif /* CONFIG_MMU */
/*
* The exception table consists of pairs of addresses: the first is the
diff --git a/arch/microblaze/include/asm/unaligned.h b/arch/microblaze/include/asm/unaligned.h
index 9d66b640c91..3658d91ac0f 100644
--- a/arch/microblaze/include/asm/unaligned.h
+++ b/arch/microblaze/include/asm/unaligned.h
@@ -12,7 +12,8 @@
# ifdef __KERNEL__
-# include <linux/unaligned/access_ok.h>
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
# include <linux/unaligned/generic.h>
# define get_unaligned __get_unaligned_be
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index da94bec4ecb..f4a5e19a20e 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -15,5 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_SELFMOD) += selfmod.o
obj-$(CONFIG_HEART_BEAT) += heartbeat.o
obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o
+obj-$(CONFIG_MMU) += misc.o
obj-y += entry$(MMUEXT).o
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
index aabd9e9423a..7bc7b68f97d 100644
--- a/arch/microblaze/kernel/asm-offsets.c
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
@@ -68,16 +69,26 @@ int main(int argc, char *argv[])
/* struct task_struct */
DEFINE(TS_THREAD_INFO, offsetof(struct task_struct, stack));
+#ifdef CONFIG_MMU
+ DEFINE(TASK_STATE, offsetof(struct task_struct, state));
+ DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+ DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+ DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+ DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+ DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+ DEFINE(TASK_PID, offsetof(struct task_struct, pid));
+ DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+ DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
+ BLANK();
+
+ DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
+ BLANK();
+#endif
/* struct thread_info */
DEFINE(TI_TASK, offsetof(struct thread_info, task));
- DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
- DEFINE(TI_STATUS, offsetof(struct thread_info, status));
- DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
- DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
- DEFINE(TI_RESTART_BLOCK, offsetof(struct thread_info, restart_block));
DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
BLANK();
diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c
index 4b0f0fdb9ca..7de84923ba0 100644
--- a/arch/microblaze/kernel/early_printk.c
+++ b/arch/microblaze/kernel/early_printk.c
@@ -87,6 +87,9 @@ int __init setup_early_printk(char *opt)
base_addr = early_uartlite_console();
if (base_addr) {
early_console_initialized = 1;
+#ifdef CONFIG_MMU
+ early_console_reg_tlb_alloc(base_addr);
+#endif
early_printk("early_printk_console is enabled at 0x%08x\n",
base_addr);
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index f24b1268baa..1fce6b803f5 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -10,7 +10,7 @@
#include <linux/linkage.h>
#include <asm/thread_info.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
#include <asm/entry.h>
#include <asm/asm-offsets.h>
#include <asm/registers.h>
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
new file mode 100644
index 00000000000..91a0e7b185d
--- /dev/null
+++ b/arch/microblaze/kernel/entry.S
@@ -0,0 +1,1116 @@
+/*
+ * Low-level system-call handling, trap handlers and context-switching
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2003 John Williams <jwilliams@itee.uq.edu.au>
+ * Copyright (C) 2001,2002 NEC Corporation
+ * Copyright (C) 2001,2002 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ * Heavily modified by John Williams for Microblaze
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+
+#include <asm/entry.h>
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/exceptions.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+
+#include <asm/page.h>
+#include <asm/unistd.h>
+
+#include <linux/errno.h>
+#include <asm/signal.h>
+
+/* The size of a state save frame. */
+#define STATE_SAVE_SIZE (PT_SIZE + STATE_SAVE_ARG_SPACE)
+
+/* The offset of the struct pt_regs in a `state save frame' on the stack. */
+#define PTO STATE_SAVE_ARG_SPACE /* 24 the space for args */
+
+#define C_ENTRY(name) .globl name; .align 4; name
+
+/*
+ * Various ways of setting and clearing BIP in flags reg.
+ * This is mucky, but necessary using microblaze version that
+ * allows msr ops to write to BIP
+ */
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+ .macro clear_bip
+ msrclr r11, MSR_BIP
+ nop
+ .endm
+
+ .macro set_bip
+ msrset r11, MSR_BIP
+ nop
+ .endm
+
+ .macro clear_eip
+ msrclr r11, MSR_EIP
+ nop
+ .endm
+
+ .macro set_ee
+ msrset r11, MSR_EE
+ nop
+ .endm
+
+ .macro disable_irq
+ msrclr r11, MSR_IE
+ nop
+ .endm
+
+ .macro enable_irq
+ msrset r11, MSR_IE
+ nop
+ .endm
+
+ .macro set_ums
+ msrset r11, MSR_UMS
+ nop
+ msrclr r11, MSR_VMS
+ nop
+ .endm
+
+ .macro set_vms
+ msrclr r11, MSR_UMS
+ nop
+ msrset r11, MSR_VMS
+ nop
+ .endm
+
+ .macro clear_vms_ums
+ msrclr r11, MSR_VMS
+ nop
+ msrclr r11, MSR_UMS
+ nop
+ .endm
+#else
+ .macro clear_bip
+ mfs r11, rmsr
+ nop
+ andi r11, r11, ~MSR_BIP
+ mts rmsr, r11
+ nop
+ .endm
+
+ .macro set_bip
+ mfs r11, rmsr
+ nop
+ ori r11, r11, MSR_BIP
+ mts rmsr, r11
+ nop
+ .endm
+
+ .macro clear_eip
+ mfs r11, rmsr
+ nop
+ andi r11, r11, ~MSR_EIP
+ mts rmsr, r11
+ nop
+ .endm
+
+ .macro set_ee
+ mfs r11, rmsr
+ nop
+ ori r11, r11, MSR_EE
+ mts rmsr, r11
+ nop
+ .endm
+
+ .macro disable_irq
+ mfs r11, rmsr
+ nop
+ andi r11, r11, ~MSR_IE
+ mts rmsr, r11
+ nop
+ .endm
+
+ .macro enable_irq
+ mfs r11, rmsr
+ nop
+ ori r11, r11, MSR_IE
+ mts rmsr, r11
+ nop
+ .endm
+
+ .macro set_ums
+ mfs r11, rmsr
+ nop
+ ori r11, r11, MSR_VMS
+ andni r11, r11, MSR_UMS
+ mts rmsr, r11
+ nop
+ .endm
+
+ .macro set_vms
+ mfs r11, rmsr
+ nop
+ ori r11, r11, MSR_VMS
+ andni r11, r11, MSR_UMS
+ mts rmsr, r11
+ nop
+ .endm
+
+ .macro clear_vms_ums
+ mfs r11, rmsr
+ nop
+ andni r11, r11, (MSR_VMS|MSR_UMS)
+ mts rmsr,r11
+ nop
+ .endm
+#endif
+
+/* Define how to call high-level functions. With MMU, virtual mode must be
+ * enabled when calling the high-level function. Clobbers R11.
+ * VM_ON, VM_OFF, DO_JUMP_BIPCLR, DO_CALL
+ */
+
+/* turn on virtual protected mode save */
+#define VM_ON \
+ set_ums; \
+ rted r0, 2f; \
+2: nop;
+
+/* turn off virtual protected mode save and user mode save*/
+#define VM_OFF \
+ clear_vms_ums; \
+ rted r0, TOPHYS(1f); \
+1: nop;
+
+#define SAVE_REGS \
+ swi r2, r1, PTO+PT_R2; /* Save SDA */ \
+ swi r5, r1, PTO+PT_R5; \
+ swi r6, r1, PTO+PT_R6; \
+ swi r7, r1, PTO+PT_R7; \
+ swi r8, r1, PTO+PT_R8; \
+ swi r9, r1, PTO+PT_R9; \
+ swi r10, r1, PTO+PT_R10; \
+ swi r11, r1, PTO+PT_R11; /* save clobbered regs after rval */\
+ swi r12, r1, PTO+PT_R12; \
+ swi r13, r1, PTO+PT_R13; /* Save SDA2 */ \
+ swi r14, r1, PTO+PT_PC; /* PC, before IRQ/trap */ \
+ swi r15, r1, PTO+PT_R15; /* Save LP */ \
+ swi r18, r1, PTO+PT_R18; /* Save asm scratch reg */ \
+ swi r19, r1, PTO+PT_R19; \
+ swi r20, r1, PTO+PT_R20; \
+ swi r21, r1, PTO+PT_R21; \
+ swi r22, r1, PTO+PT_R22; \
+ swi r23, r1, PTO+PT_R23; \
+ swi r24, r1, PTO+PT_R24; \
+ swi r25, r1, PTO+PT_R25; \
+ swi r26, r1, PTO+PT_R26; \
+ swi r27, r1, PTO+PT_R27; \
+ swi r28, r1, PTO+PT_R28; \
+ swi r29, r1, PTO+PT_R29; \
+ swi r30, r1, PTO+PT_R30; \
+ swi r31, r1, PTO+PT_R31; /* Save current task reg */ \
+ mfs r11, rmsr; /* save MSR */ \
+ nop; \
+ swi r11, r1, PTO+PT_MSR;
+
+#define RESTORE_REGS \
+ lwi r11, r1, PTO+PT_MSR; \
+ mts rmsr , r11; \
+ nop; \
+ lwi r2, r1, PTO+PT_R2; /* restore SDA */ \
+ lwi r5, r1, PTO+PT_R5; \
+ lwi r6, r1, PTO+PT_R6; \
+ lwi r7, r1, PTO+PT_R7; \
+ lwi r8, r1, PTO+PT_R8; \
+ lwi r9, r1, PTO+PT_R9; \
+ lwi r10, r1, PTO+PT_R10; \
+ lwi r11, r1, PTO+PT_R11; /* restore clobbered regs after rval */\
+ lwi r12, r1, PTO+PT_R12; \
+ lwi r13, r1, PTO+PT_R13; /* restore SDA2 */ \
+ lwi r14, r1, PTO+PT_PC; /* RESTORE_LINK PC, before IRQ/trap */\
+ lwi r15, r1, PTO+PT_R15; /* restore LP */ \
+ lwi r18, r1, PTO+PT_R18; /* restore asm scratch reg */ \
+ lwi r19, r1, PTO+PT_R19; \
+ lwi r20, r1, PTO+PT_R20; \
+ lwi r21, r1, PTO+PT_R21; \
+ lwi r22, r1, PTO+PT_R22; \
+ lwi r23, r1, PTO+PT_R23; \
+ lwi r24, r1, PTO+PT_R24; \
+ lwi r25, r1, PTO+PT_R25; \
+ lwi r26, r1, PTO+PT_R26; \
+ lwi r27, r1, PTO+PT_R27; \
+ lwi r28, r1, PTO+PT_R28; \
+ lwi r29, r1, PTO+PT_R29; \
+ lwi r30, r1, PTO+PT_R30; \
+ lwi r31, r1, PTO+PT_R31; /* Restore cur task reg */
+
+.text
+
+/*
+ * User trap.
+ *
+ * System calls are handled here.
+ *
+ * Syscall protocol:
+ * Syscall number in r12, args in r5-r10
+ * Return value in r3
+ *
+ * Trap entered via brki instruction, so BIP bit is set, and interrupts
+ * are masked. This is nice, means we don't have to CLI before state save
+ */
+C_ENTRY(_user_exception):
+ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+ addi r14, r14, 4 /* return address is 4 byte after call */
+ swi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* Save r11 */
+
+ lwi r11, r0, TOPHYS(PER_CPU(KM));/* See if already in kernel mode.*/
+ beqi r11, 1f; /* Jump ahead if coming from user */
+/* Kernel-mode state save. */
+ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
+ tophys(r1,r11);
+ swi r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */
+ lwi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
+
+ addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */
+ SAVE_REGS
+
+ addi r11, r0, 1; /* Was in kernel-mode. */
+ swi r11, r1, PTO+PT_MODE; /* pt_regs -> kernel mode */
+ brid 2f;
+ nop; /* Fill delay slot */
+
+/* User-mode state save. */
+1:
+ lwi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
+ lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+ tophys(r1,r1);
+ lwi r1, r1, TS_THREAD_INFO; /* get stack from task_struct */
+/* calculate kernel stack pointer from task struct 8k */
+ addik r1, r1, THREAD_SIZE;
+ tophys(r1,r1);
+
+ addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */
+ SAVE_REGS
+
+ swi r0, r1, PTO+PT_MODE; /* Was in user-mode. */
+ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+ swi r11, r1, PTO+PT_R1; /* Store user SP. */
+ addi r11, r0, 1;
+ swi r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode. */
+2: lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+ /* Save away the syscall number. */
+ swi r12, r1, PTO+PT_R0;
+ tovirt(r1,r1)
+
+ la r15, r0, ret_from_trap-8
+/* where the trap should return need -8 to adjust for rtsd r15, 8*/
+/* Jump to the appropriate function for the system call number in r12
+ * (r12 is not preserved), or return an error if r12 is not valid. The LP
+ * register should point to the location where
+ * the called function should return. [note that MAKE_SYS_CALL uses label 1] */
+ /* See if the system call number is valid. */
+ addi r11, r12, -__NR_syscalls;
+ bgei r11,1f;
+ /* Figure out which function to use for this system call. */
+ /* Note Microblaze barrel shift is optional, so don't rely on it */
+ add r12, r12, r12; /* convert num -> ptr */
+ add r12, r12, r12;
+
+ /* Trac syscalls and stored them to r0_ram */
+ lwi r3, r12, 0x400 + TOPHYS(r0_ram)
+ addi r3, r3, 1
+ swi r3, r12, 0x400 + TOPHYS(r0_ram)
+
+ lwi r12, r12, TOPHYS(sys_call_table); /* Function ptr */
+ /* Make the system call. to r12*/
+ set_vms;
+ rtid r12, 0;
+ nop;
+ /* The syscall number is invalid, return an error. */
+1: VM_ON; /* RETURN() expects virtual mode*/
+ addi r3, r0, -ENOSYS;
+ rtsd r15,8; /* looks like a normal subroutine return */
+ or r0, r0, r0
+
+
+/* Entry point used to return from a syscall/trap. */
+/* We re-enable BIP bit before state restore */
+C_ENTRY(ret_from_trap):
+ set_bip; /* Ints masked for state restore*/
+ lwi r11, r1, PTO+PT_MODE;
+/* See if returning to kernel mode, if so, skip resched &c. */
+ bnei r11, 2f;
+
+ /* We're returning to user mode, so check for various conditions that
+ * trigger rescheduling. */
+ /* Get current task ptr into r11 */
+ add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+ lwi r11, r11, TS_THREAD_INFO; /* get thread info */
+ lwi r11, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r11, _TIF_NEED_RESCHED;
+ beqi r11, 5f;
+
+ swi r3, r1, PTO + PT_R3; /* store syscall result */
+ swi r4, r1, PTO + PT_R4;
+ bralid r15, schedule; /* Call scheduler */
+ nop; /* delay slot */
+ lwi r3, r1, PTO + PT_R3; /* restore syscall result */
+ lwi r4, r1, PTO + PT_R4;
+
+ /* Maybe handle a signal */
+5: add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+ lwi r11, r11, TS_THREAD_INFO; /* get thread info */
+ lwi r11, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r11, _TIF_SIGPENDING;
+ beqi r11, 1f; /* Signals to handle, handle them */
+
+ swi r3, r1, PTO + PT_R3; /* store syscall result */
+ swi r4, r1, PTO + PT_R4;
+ la r5, r1, PTO; /* Arg 1: struct pt_regs *regs */
+ add r6, r0, r0; /* Arg 2: sigset_t *oldset */
+ addi r7, r0, 1; /* Arg 3: int in_syscall */
+ bralid r15, do_signal; /* Handle any signals */
+ nop;
+ lwi r3, r1, PTO + PT_R3; /* restore syscall result */
+ lwi r4, r1, PTO + PT_R4;
+
+/* Finally, return to user state. */
+1: swi r0, r0, PER_CPU(KM); /* Now officially in user state. */
+ add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+ swi r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+ VM_OFF;
+ tophys(r1,r1);
+ RESTORE_REGS;
+ addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */
+ lwi r1, r1, PT_R1 - PT_SIZE;/* Restore user stack pointer. */
+ bri 6f;
+
+/* Return to kernel state. */
+2: VM_OFF;
+ tophys(r1,r1);
+ RESTORE_REGS;
+ addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */
+ tovirt(r1,r1);
+6:
+TRAP_return: /* Make global symbol for debugging */
+ rtbd r14, 0; /* Instructions to return from an IRQ */
+ nop;
+
+
+/* These syscalls need access to the struct pt_regs on the stack, so we
+ implement them in assembly (they're basically all wrappers anyway). */
+
+C_ENTRY(sys_fork_wrapper):
+ addi r5, r0, SIGCHLD /* Arg 0: flags */
+ lwi r6, r1, PTO+PT_R1 /* Arg 1: child SP (use parent's) */
+ la r7, r1, PTO /* Arg 2: parent context */
+ add r8. r0, r0 /* Arg 3: (unused) */
+ add r9, r0, r0; /* Arg 4: (unused) */
+ add r10, r0, r0; /* Arg 5: (unused) */
+ brid do_fork /* Do real work (tail-call) */
+ nop;
+
+/* This the initial entry point for a new child thread, with an appropriate
+ stack in place that makes it look the the child is in the middle of an
+ syscall. This function is actually `returned to' from switch_thread
+ (copy_thread makes ret_from_fork the return address in each new thread's
+ saved context). */
+C_ENTRY(ret_from_fork):
+ bralid r15, schedule_tail; /* ...which is schedule_tail's arg */
+ add r3, r5, r0; /* switch_thread returns the prev task */
+ /* ( in the delay slot ) */
+ add r3, r0, r0; /* Child's fork call should return 0. */
+ brid ret_from_trap; /* Do normal trap return */
+ nop;
+
+C_ENTRY(sys_vfork_wrapper):
+ la r5, r1, PTO
+ brid sys_vfork /* Do real work (tail-call) */
+ nop
+
+C_ENTRY(sys_clone_wrapper):
+ bnei r6, 1f; /* See if child SP arg (arg 1) is 0. */
+ lwi r6, r1, PTO+PT_R1; /* If so, use paret's stack ptr */
+1: la r7, r1, PTO; /* Arg 2: parent context */
+ add r8, r0, r0; /* Arg 3: (unused) */
+ add r9, r0, r0; /* Arg 4: (unused) */
+ add r10, r0, r0; /* Arg 5: (unused) */
+ brid do_fork /* Do real work (tail-call) */
+ nop;
+
+C_ENTRY(sys_execve_wrapper):
+ la r8, r1, PTO; /* add user context as 4th arg */
+ brid sys_execve; /* Do real work (tail-call).*/
+ nop;
+
+C_ENTRY(sys_sigsuspend_wrapper):
+ swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ swi r4, r1, PTO+PT_R4;
+ la r6, r1, PTO; /* add user context as 2nd arg */
+ bralid r15, sys_sigsuspend; /* Do real work.*/
+ nop;
+ lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ lwi r4, r1, PTO+PT_R4;
+ bri ret_from_trap /* fall through will not work here due to align */
+ nop;
+
+C_ENTRY(sys_rt_sigsuspend_wrapper):
+ swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ swi r4, r1, PTO+PT_R4;
+ la r7, r1, PTO; /* add user context as 3rd arg */
+ brlid r15, sys_rt_sigsuspend; /* Do real work.*/
+ nop;
+ lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ lwi r4, r1, PTO+PT_R4;
+ bri ret_from_trap /* fall through will not work here due to align */
+ nop;
+
+
+C_ENTRY(sys_sigreturn_wrapper):
+ swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ swi r4, r1, PTO+PT_R4;
+ la r5, r1, PTO; /* add user context as 1st arg */
+ brlid r15, sys_sigreturn; /* Do real work.*/
+ nop;
+ lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ lwi r4, r1, PTO+PT_R4;
+ bri ret_from_trap /* fall through will not work here due to align */
+ nop;
+
+C_ENTRY(sys_rt_sigreturn_wrapper):
+ swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ swi r4, r1, PTO+PT_R4;
+ la r5, r1, PTO; /* add user context as 1st arg */
+ brlid r15, sys_rt_sigreturn /* Do real work */
+ nop;
+ lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ lwi r4, r1, PTO+PT_R4;
+ bri ret_from_trap /* fall through will not work here due to align */
+ nop;
+
+/*
+ * HW EXCEPTION rutine start
+ */
+
+#define SAVE_STATE \
+ swi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* Save r11 */ \
+ set_bip; /*equalize initial state for all possible entries*/\
+ clear_eip; \
+ enable_irq; \
+ set_ee; \
+ /* See if already in kernel mode.*/ \
+ lwi r11, r0, TOPHYS(PER_CPU(KM)); \
+ beqi r11, 1f; /* Jump ahead if coming from user */\
+ /* Kernel-mode state save. */ \
+ /* Reload kernel stack-ptr. */ \
+ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); \
+ tophys(r1,r11); \
+ swi r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */ \
+ lwi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */\
+ addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */\
+ /* store return registers separately because \
+ * this macros is use for others exceptions */ \
+ swi r3, r1, PTO + PT_R3; \
+ swi r4, r1, PTO + PT_R4; \
+ SAVE_REGS \
+ /* PC, before IRQ/trap - this is one instruction above */ \
+ swi r17, r1, PTO+PT_PC; \
+ \
+ addi r11, r0, 1; /* Was in kernel-mode. */ \
+ swi r11, r1, PTO+PT_MODE; \
+ brid 2f; \
+ nop; /* Fill delay slot */ \
+1: /* User-mode state save. */ \
+ lwi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */\
+ lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
+ tophys(r1,r1); \
+ lwi r1, r1, TS_THREAD_INFO; /* get the thread info */ \
+ addik r1, r1, THREAD_SIZE; /* calculate kernel stack pointer */\
+ tophys(r1,r1); \
+ \
+ addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */\
+ /* store return registers separately because this macros \
+ * is use for others exceptions */ \
+ swi r3, r1, PTO + PT_R3; \
+ swi r4, r1, PTO + PT_R4; \
+ SAVE_REGS \
+ /* PC, before IRQ/trap - this is one instruction above FIXME*/ \
+ swi r17, r1, PTO+PT_PC; \
+ \
+ swi r0, r1, PTO+PT_MODE; /* Was in user-mode. */ \
+ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); \
+ swi r11, r1, PTO+PT_R1; /* Store user SP. */ \
+ addi r11, r0, 1; \
+ swi r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode.*/\
+2: lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
+ /* Save away the syscall number. */ \
+ swi r0, r1, PTO+PT_R0; \
+ tovirt(r1,r1)
+
+C_ENTRY(full_exception_trap):
+ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+ /* adjust exception address for privileged instruction
+ * for finding where is it */
+ addik r17, r17, -4
+ SAVE_STATE /* Save registers */
+ /* FIXME this can be store directly in PT_ESR reg.
+ * I tested it but there is a fault */
+ /* where the trap should return need -8 to adjust for rtsd r15, 8 */
+ la r15, r0, ret_from_exc - 8
+ la r5, r1, PTO /* parameter struct pt_regs * regs */
+ mfs r6, resr
+ nop
+ mfs r7, rfsr; /* save FSR */
+ nop
+ la r12, r0, full_exception
+ set_vms;
+ rtbd r12, 0;
+ nop;
+
+/*
+ * Unaligned data trap.
+ *
+ * Unaligned data trap last on 4k page is handled here.
+ *
+ * Trap entered via exception, so EE bit is set, and interrupts
+ * are masked. This is nice, means we don't have to CLI before state save
+ *
+ * The assembler routine is in "arch/microblaze/kernel/hw_exception_handler.S"
+ */
+C_ENTRY(unaligned_data_trap):
+ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+ SAVE_STATE /* Save registers.*/
+ /* where the trap should return need -8 to adjust for rtsd r15, 8 */
+ la r15, r0, ret_from_exc-8
+ mfs r3, resr /* ESR */
+ nop
+ mfs r4, rear /* EAR */
+ nop
+ la r7, r1, PTO /* parameter struct pt_regs * regs */
+ la r12, r0, _unaligned_data_exception
+ set_vms;
+ rtbd r12, 0; /* interrupts enabled */
+ nop;
+
+/*
+ * Page fault traps.
+ *
+ * If the real exception handler (from hw_exception_handler.S) didn't find
+ * the mapping for the process, then we're thrown here to handle such situation.
+ *
+ * Trap entered via exceptions, so EE bit is set, and interrupts
+ * are masked. This is nice, means we don't have to CLI before state save
+ *
+ * Build a standard exception frame for TLB Access errors. All TLB exceptions
+ * will bail out to this point if they can't resolve the lightweight TLB fault.
+ *
+ * The C function called is in "arch/microblaze/mm/fault.c", declared as:
+ * void do_page_fault(struct pt_regs *regs,
+ * unsigned long address,
+ * unsigned long error_code)
+ */
+/* data and intruction trap - which is choose is resolved int fault.c */
+C_ENTRY(page_fault_data_trap):
+ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+ SAVE_STATE /* Save registers.*/
+ /* where the trap should return need -8 to adjust for rtsd r15, 8 */
+ la r15, r0, ret_from_exc-8
+ la r5, r1, PTO /* parameter struct pt_regs * regs */
+ mfs r6, rear /* parameter unsigned long address */
+ nop
+ mfs r7, resr /* parameter unsigned long error_code */
+ nop
+ la r12, r0, do_page_fault
+ set_vms;
+ rtbd r12, 0; /* interrupts enabled */
+ nop;
+
+C_ENTRY(page_fault_instr_trap):
+ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+ SAVE_STATE /* Save registers.*/
+ /* where the trap should return need -8 to adjust for rtsd r15, 8 */
+ la r15, r0, ret_from_exc-8
+ la r5, r1, PTO /* parameter struct pt_regs * regs */
+ mfs r6, rear /* parameter unsigned long address */
+ nop
+ ori r7, r0, 0 /* parameter unsigned long error_code */
+ la r12, r0, do_page_fault
+ set_vms;
+ rtbd r12, 0; /* interrupts enabled */
+ nop;
+
+/* Entry point used to return from an exception. */
+C_ENTRY(ret_from_exc):
+ set_bip; /* Ints masked for state restore*/
+ lwi r11, r1, PTO+PT_MODE;
+ bnei r11, 2f; /* See if returning to kernel mode, */
+ /* ... if so, skip resched &c. */
+
+ /* We're returning to user mode, so check for various conditions that
+ trigger rescheduling. */
+ /* Get current task ptr into r11 */
+ add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+ lwi r11, r11, TS_THREAD_INFO; /* get thread info */
+ lwi r11, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r11, _TIF_NEED_RESCHED;
+ beqi r11, 5f;
+
+/* Call the scheduler before returning from a syscall/trap. */
+ bralid r15, schedule; /* Call scheduler */
+ nop; /* delay slot */
+
+ /* Maybe handle a signal */
+5: add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+ lwi r11, r11, TS_THREAD_INFO; /* get thread info */
+ lwi r11, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r11, _TIF_SIGPENDING;
+ beqi r11, 1f; /* Signals to handle, handle them */
+
+ /*
+ * Handle a signal return; Pending signals should be in r18.
+ *
+ * Not all registers are saved by the normal trap/interrupt entry
+ * points (for instance, call-saved registers (because the normal
+ * C-compiler calling sequence in the kernel makes sure they're
+ * preserved), and call-clobbered registers in the case of
+ * traps), but signal handlers may want to examine or change the
+ * complete register state. Here we save anything not saved by
+ * the normal entry sequence, so that it may be safely restored
+ * (in a possibly modified form) after do_signal returns.
+ * store return registers separately because this macros is use
+ * for others exceptions */
+ swi r3, r1, PTO + PT_R3;
+ swi r4, r1, PTO + PT_R4;
+ la r5, r1, PTO; /* Arg 1: struct pt_regs *regs */
+ add r6, r0, r0; /* Arg 2: sigset_t *oldset */
+ addi r7, r0, 0; /* Arg 3: int in_syscall */
+ bralid r15, do_signal; /* Handle any signals */
+ nop;
+ lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ lwi r4, r1, PTO+PT_R4;
+
+/* Finally, return to user state. */
+1: swi r0, r0, PER_CPU(KM); /* Now officially in user state. */
+ add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+ swi r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+ VM_OFF;
+ tophys(r1,r1);
+
+ lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ lwi r4, r1, PTO+PT_R4;
+ RESTORE_REGS;
+ addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */
+
+ lwi r1, r1, PT_R1 - PT_SIZE; /* Restore user stack pointer. */
+ bri 6f;
+/* Return to kernel state. */
+2: VM_OFF;
+ tophys(r1,r1);
+ lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ lwi r4, r1, PTO+PT_R4;
+ RESTORE_REGS;
+ addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */
+
+ tovirt(r1,r1);
+6:
+EXC_return: /* Make global symbol for debugging */
+ rtbd r14, 0; /* Instructions to return from an IRQ */
+ nop;
+
+/*
+ * HW EXCEPTION rutine end
+ */
+
+/*
+ * Hardware maskable interrupts.
+ *
+ * The stack-pointer (r1) should have already been saved to the memory
+ * location PER_CPU(ENTRY_SP).
+ */
+C_ENTRY(_interrupt):
+/* MS: we are in physical address */
+/* Save registers, switch to proper stack, convert SP to virtual.*/
+ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP))
+ swi r11, r0, TOPHYS(PER_CPU(R11_SAVE));
+ /* MS: See if already in kernel mode. */
+ lwi r11, r0, TOPHYS(PER_CPU(KM));
+ beqi r11, 1f; /* MS: Jump ahead if coming from user */
+
+/* Kernel-mode state save. */
+ or r11, r1, r0
+ tophys(r1,r11); /* MS: I have in r1 physical address where stack is */
+/* MS: Save original SP - position PT_R1 to next stack frame 4 *1 - 152*/
+ swi r11, r1, (PT_R1 - PT_SIZE);
+/* MS: restore r11 because of saving in SAVE_REGS */
+ lwi r11, r0, TOPHYS(PER_CPU(R11_SAVE));
+ /* save registers */
+/* MS: Make room on the stack -> activation record */
+ addik r1, r1, -STATE_SAVE_SIZE;
+/* MS: store return registers separately because
+ * this macros is use for others exceptions */
+ swi r3, r1, PTO + PT_R3;
+ swi r4, r1, PTO + PT_R4;
+ SAVE_REGS
+ /* MS: store mode */
+ addi r11, r0, 1; /* MS: Was in kernel-mode. */
+ swi r11, r1, PTO + PT_MODE; /* MS: and save it */
+ brid 2f;
+ nop; /* MS: Fill delay slot */
+
+1:
+/* User-mode state save. */
+/* MS: restore r11 -> FIXME move before SAVE_REG */
+ lwi r11, r0, TOPHYS(PER_CPU(R11_SAVE));
+ /* MS: get the saved current */
+ lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+ tophys(r1,r1);
+ lwi r1, r1, TS_THREAD_INFO;
+ addik r1, r1, THREAD_SIZE;
+ tophys(r1,r1);
+ /* save registers */
+ addik r1, r1, -STATE_SAVE_SIZE;
+ swi r3, r1, PTO+PT_R3;
+ swi r4, r1, PTO+PT_R4;
+ SAVE_REGS
+ /* calculate mode */
+ swi r0, r1, PTO + PT_MODE;
+ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+ swi r11, r1, PTO+PT_R1;
+ /* setup kernel mode to KM */
+ addi r11, r0, 1;
+ swi r11, r0, TOPHYS(PER_CPU(KM));
+
+2:
+ lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+ swi r0, r1, PTO + PT_R0;
+ tovirt(r1,r1)
+ la r5, r1, PTO;
+ set_vms;
+ la r11, r0, do_IRQ;
+ la r15, r0, irq_call;
+irq_call:rtbd r11, 0;
+ nop;
+
+/* MS: we are in virtual mode */
+ret_from_irq:
+ lwi r11, r1, PTO + PT_MODE;
+ bnei r11, 2f;
+
+ add r11, r0, CURRENT_TASK;
+ lwi r11, r11, TS_THREAD_INFO;
+ lwi r11, r11, TI_FLAGS; /* MS: get flags from thread info */
+ andi r11, r11, _TIF_NEED_RESCHED;
+ beqi r11, 5f
+ bralid r15, schedule;
+ nop; /* delay slot */
+
+ /* Maybe handle a signal */
+5: add r11, r0, CURRENT_TASK;
+ lwi r11, r11, TS_THREAD_INFO; /* MS: get thread info */
+ lwi r11, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r11, _TIF_SIGPENDING;
+ beqid r11, no_intr_resched
+/* Handle a signal return; Pending signals should be in r18. */
+ addi r7, r0, 0; /* Arg 3: int in_syscall */
+ la r5, r1, PTO; /* Arg 1: struct pt_regs *regs */
+ bralid r15, do_signal; /* Handle any signals */
+ add r6, r0, r0; /* Arg 2: sigset_t *oldset */
+
+/* Finally, return to user state. */
+no_intr_resched:
+ /* Disable interrupts, we are now committed to the state restore */
+ disable_irq
+ swi r0, r0, PER_CPU(KM); /* MS: Now officially in user state. */
+ add r11, r0, CURRENT_TASK;
+ swi r11, r0, PER_CPU(CURRENT_SAVE);
+ VM_OFF;
+ tophys(r1,r1);
+ lwi r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
+ lwi r4, r1, PTO + PT_R4;
+ RESTORE_REGS
+ addik r1, r1, STATE_SAVE_SIZE /* MS: Clean up stack space. */
+ lwi r1, r1, PT_R1 - PT_SIZE;
+ bri 6f;
+/* MS: Return to kernel state. */
+2: VM_OFF /* MS: turn off MMU */
+ tophys(r1,r1)
+ lwi r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
+ lwi r4, r1, PTO + PT_R4;
+ RESTORE_REGS
+ addik r1, r1, STATE_SAVE_SIZE /* MS: Clean up stack space. */
+ tovirt(r1,r1);
+6:
+IRQ_return: /* MS: Make global symbol for debugging */
+ rtid r14, 0
+ nop
+
+/*
+ * `Debug' trap
+ * We enter dbtrap in "BIP" (breakpoint) mode.
+ * So we exit the breakpoint mode with an 'rtbd' and proceed with the
+ * original dbtrap.
+ * however, wait to save state first
+ */
+C_ENTRY(_debug_exception):
+ /* BIP bit is set on entry, no interrupts can occur */
+ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP))
+
+ swi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* Save r11 */
+ set_bip; /*equalize initial state for all possible entries*/
+ clear_eip;
+ enable_irq;
+ lwi r11, r0, TOPHYS(PER_CPU(KM));/* See if already in kernel mode.*/
+ beqi r11, 1f; /* Jump ahead if coming from user */
+ /* Kernel-mode state save. */
+ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
+ tophys(r1,r11);
+ swi r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */
+ lwi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
+
+ addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */
+ swi r3, r1, PTO + PT_R3;
+ swi r4, r1, PTO + PT_R4;
+ SAVE_REGS;
+
+ addi r11, r0, 1; /* Was in kernel-mode. */
+ swi r11, r1, PTO + PT_MODE;
+ brid 2f;
+ nop; /* Fill delay slot */
+1: /* User-mode state save. */
+ lwi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
+ lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+ tophys(r1,r1);
+ lwi r1, r1, TS_THREAD_INFO; /* get the thread info */
+ addik r1, r1, THREAD_SIZE; /* calculate kernel stack pointer */
+ tophys(r1,r1);
+
+ addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */
+ swi r3, r1, PTO + PT_R3;
+ swi r4, r1, PTO + PT_R4;
+ SAVE_REGS;
+
+ swi r0, r1, PTO+PT_MODE; /* Was in user-mode. */
+ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+ swi r11, r1, PTO+PT_R1; /* Store user SP. */
+ addi r11, r0, 1;
+ swi r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode. */
+2: lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+ /* Save away the syscall number. */
+ swi r0, r1, PTO+PT_R0;
+ tovirt(r1,r1)
+
+ addi r5, r0, SIGTRAP /* send the trap signal */
+ add r6, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+ addk r7, r0, r0 /* 3rd param zero */
+
+ set_vms;
+ la r11, r0, send_sig;
+ la r15, r0, dbtrap_call;
+dbtrap_call: rtbd r11, 0;
+ nop;
+
+ set_bip; /* Ints masked for state restore*/
+ lwi r11, r1, PTO+PT_MODE;
+ bnei r11, 2f;
+
+ /* Get current task ptr into r11 */
+ add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+ lwi r11, r11, TS_THREAD_INFO; /* get thread info */
+ lwi r11, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r11, _TIF_NEED_RESCHED;
+ beqi r11, 5f;
+
+/* Call the scheduler before returning from a syscall/trap. */
+
+ bralid r15, schedule; /* Call scheduler */
+ nop; /* delay slot */
+ /* XXX Is PT_DTRACE handling needed here? */
+ /* XXX m68knommu also checks TASK_STATE & TASK_COUNTER here. */
+
+ /* Maybe handle a signal */
+5: add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+ lwi r11, r11, TS_THREAD_INFO; /* get thread info */
+ lwi r11, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r11, _TIF_SIGPENDING;
+ beqi r11, 1f; /* Signals to handle, handle them */
+
+/* Handle a signal return; Pending signals should be in r18. */
+ /* Not all registers are saved by the normal trap/interrupt entry
+ points (for instance, call-saved registers (because the normal
+ C-compiler calling sequence in the kernel makes sure they're
+ preserved), and call-clobbered registers in the case of
+ traps), but signal handlers may want to examine or change the
+ complete register state. Here we save anything not saved by
+ the normal entry sequence, so that it may be safely restored
+ (in a possibly modified form) after do_signal returns. */
+
+ la r5, r1, PTO; /* Arg 1: struct pt_regs *regs */
+ add r6, r0, r0; /* Arg 2: sigset_t *oldset */
+ addi r7, r0, 0; /* Arg 3: int in_syscall */
+ bralid r15, do_signal; /* Handle any signals */
+ nop;
+
+
+/* Finally, return to user state. */
+1: swi r0, r0, PER_CPU(KM); /* Now officially in user state. */
+ add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+ swi r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+ VM_OFF;
+ tophys(r1,r1);
+
+ lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ lwi r4, r1, PTO+PT_R4;
+ RESTORE_REGS
+ addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */
+
+
+ lwi r1, r1, PT_R1 - PT_SIZE;
+ /* Restore user stack pointer. */
+ bri 6f;
+
+/* Return to kernel state. */
+2: VM_OFF;
+ tophys(r1,r1);
+ lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+ lwi r4, r1, PTO+PT_R4;
+ RESTORE_REGS
+ addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */
+
+ tovirt(r1,r1);
+6:
+DBTRAP_return: /* Make global symbol for debugging */
+ rtbd r14, 0; /* Instructions to return from an IRQ */
+ nop;
+
+
+
+ENTRY(_switch_to)
+ /* prepare return value */
+ addk r3, r0, r31
+
+ /* save registers in cpu_context */
+ /* use r11 and r12, volatile registers, as temp register */
+ /* give start of cpu_context for previous process */
+ addik r11, r5, TI_CPU_CONTEXT
+ swi r1, r11, CC_R1
+ swi r2, r11, CC_R2
+ /* skip volatile registers.
+ * they are saved on stack when we jumped to _switch_to() */
+ /* dedicated registers */
+ swi r13, r11, CC_R13
+ swi r14, r11, CC_R14
+ swi r15, r11, CC_R15
+ swi r16, r11, CC_R16
+ swi r17, r11, CC_R17
+ swi r18, r11, CC_R18
+ /* save non-volatile registers */
+ swi r19, r11, CC_R19
+ swi r20, r11, CC_R20
+ swi r21, r11, CC_R21
+ swi r22, r11, CC_R22
+ swi r23, r11, CC_R23
+ swi r24, r11, CC_R24
+ swi r25, r11, CC_R25
+ swi r26, r11, CC_R26
+ swi r27, r11, CC_R27
+ swi r28, r11, CC_R28
+ swi r29, r11, CC_R29
+ swi r30, r11, CC_R30
+ /* special purpose registers */
+ mfs r12, rmsr
+ nop
+ swi r12, r11, CC_MSR
+ mfs r12, rear
+ nop
+ swi r12, r11, CC_EAR
+ mfs r12, resr
+ nop
+ swi r12, r11, CC_ESR
+ mfs r12, rfsr
+ nop
+ swi r12, r11, CC_FSR
+
+ /* update r31, the current */
+ lwi r31, r6, TI_TASK/* give me pointer to task which will be next */
+ /* stored it to current_save too */
+ swi r31, r0, PER_CPU(CURRENT_SAVE)
+
+ /* get new process' cpu context and restore */
+ /* give me start where start context of next task */
+ addik r11, r6, TI_CPU_CONTEXT
+
+ /* non-volatile registers */
+ lwi r30, r11, CC_R30
+ lwi r29, r11, CC_R29
+ lwi r28, r11, CC_R28
+ lwi r27, r11, CC_R27
+ lwi r26, r11, CC_R26
+ lwi r25, r11, CC_R25
+ lwi r24, r11, CC_R24
+ lwi r23, r11, CC_R23
+ lwi r22, r11, CC_R22
+ lwi r21, r11, CC_R21
+ lwi r20, r11, CC_R20
+ lwi r19, r11, CC_R19
+ /* dedicated registers */
+ lwi r18, r11, CC_R18
+ lwi r17, r11, CC_R17
+ lwi r16, r11, CC_R16
+ lwi r15, r11, CC_R15
+ lwi r14, r11, CC_R14
+ lwi r13, r11, CC_R13
+ /* skip volatile registers */
+ lwi r2, r11, CC_R2
+ lwi r1, r11, CC_R1
+
+ /* special purpose registers */
+ lwi r12, r11, CC_FSR
+ mts rfsr, r12
+ nop
+ lwi r12, r11, CC_MSR
+ mts rmsr, r12
+ nop
+
+ rtsd r15, 8
+ nop
+
+ENTRY(_reset)
+ brai 0x70; /* Jump back to FS-boot */
+
+ENTRY(_break)
+ mfs r5, rmsr
+ nop
+ swi r5, r0, 0x250 + TOPHYS(r0_ram)
+ mfs r5, resr
+ nop
+ swi r5, r0, 0x254 + TOPHYS(r0_ram)
+ bri 0
+
+ /* These are compiled and loaded into high memory, then
+ * copied into place in mach_early_setup */
+ .section .init.ivt, "ax"
+ .org 0x0
+ /* this is very important - here is the reset vector */
+ /* in current MMU branch you don't care what is here - it is
+ * used from bootloader site - but this is correct for FS-BOOT */
+ brai 0x70
+ nop
+ brai TOPHYS(_user_exception); /* syscall handler */
+ brai TOPHYS(_interrupt); /* Interrupt handler */
+ brai TOPHYS(_break); /* nmi trap handler */
+ brai TOPHYS(_hw_exception_handler); /* HW exception handler */
+
+ .org 0x60
+ brai TOPHYS(_debug_exception); /* debug trap handler*/
+
+.section .rodata,"a"
+#include "syscall_table.S"
+
+syscall_table_size=(.-sys_call_table)
+
diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c
index 4a8a4064c7e..0cb64a31e89 100644
--- a/arch/microblaze/kernel/exceptions.c
+++ b/arch/microblaze/kernel/exceptions.c
@@ -21,9 +21,9 @@
#include <asm/exceptions.h>
#include <asm/entry.h> /* For KM CPU var */
-#include <asm/uaccess.h>
-#include <asm/errno.h>
-#include <asm/ptrace.h>
+#include <linux/uaccess.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
#include <asm/current.h>
#define MICROBLAZE_ILL_OPCODE_EXCEPTION 0x02
@@ -31,7 +31,7 @@
#define MICROBLAZE_DBUS_EXCEPTION 0x04
#define MICROBLAZE_DIV_ZERO_EXCEPTION 0x05
#define MICROBLAZE_FPU_EXCEPTION 0x06
-#define MICROBLAZE_PRIVILEG_EXCEPTION 0x07
+#define MICROBLAZE_PRIVILEGED_EXCEPTION 0x07
static DEFINE_SPINLOCK(die_lock);
@@ -66,6 +66,11 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
int fsr, int addr)
{
+#ifdef CONFIG_MMU
+ int code;
+ addr = regs->pc;
+#endif
+
#if 0
printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
type, user_mode(regs) ? "user" : "kernel", fsr,
@@ -74,7 +79,13 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
switch (type & 0x1F) {
case MICROBLAZE_ILL_OPCODE_EXCEPTION:
- _exception(SIGILL, regs, ILL_ILLOPC, addr);
+ if (user_mode(regs)) {
+ printk(KERN_WARNING "Illegal opcode exception in user mode.\n");
+ _exception(SIGILL, regs, ILL_ILLOPC, addr);
+ return;
+ }
+ printk(KERN_WARNING "Illegal opcode exception in kernel mode.\n");
+ die("opcode exception", regs, SIGBUS);
break;
case MICROBLAZE_IBUS_EXCEPTION:
if (user_mode(regs)) {
@@ -95,11 +106,16 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
die("bus exception", regs, SIGBUS);
break;
case MICROBLAZE_DIV_ZERO_EXCEPTION:
- printk(KERN_WARNING "Divide by zero exception\n");
- _exception(SIGILL, regs, ILL_ILLOPC, addr);
+ if (user_mode(regs)) {
+ printk(KERN_WARNING "Divide by zero exception in user mode\n");
+ _exception(SIGILL, regs, ILL_ILLOPC, addr);
+ return;
+ }
+ printk(KERN_WARNING "Divide by zero exception in kernel mode.\n");
+ die("Divide by exception", regs, SIGBUS);
break;
-
case MICROBLAZE_FPU_EXCEPTION:
+ printk(KERN_WARNING "FPU exception\n");
/* IEEE FP exception */
/* I removed fsr variable and use code var for storing fsr */
if (fsr & FSR_IO)
@@ -115,7 +131,20 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
_exception(SIGFPE, regs, fsr, addr);
break;
+#ifdef CONFIG_MMU
+ case MICROBLAZE_PRIVILEGED_EXCEPTION:
+ printk(KERN_WARNING "Privileged exception\n");
+ /* "brk r0,r0" - used as debug breakpoint */
+ if (get_user(code, (unsigned long *)regs->pc) == 0
+ && code == 0x980c0000) {
+ _exception(SIGTRAP, regs, TRAP_BRKPT, addr);
+ } else {
+ _exception(SIGILL, regs, ILL_PRVOPC, addr);
+ }
+ break;
+#endif
default:
+ /* FIXME what to do in unexpected exception */
printk(KERN_WARNING "Unexpected exception %02x "
"PC=%08x in %s mode\n", type, (unsigned int) addr,
kernel_mode(regs) ? "kernel" : "user");
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 319dc35fc92..e568d6ec621 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -3,6 +3,26 @@
* Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
+ * MMU code derived from arch/ppc/kernel/head_4xx.S:
+ * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ * Initial PowerPC version.
+ * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Rewritten for PReP
+ * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ * Low-level exception handers, MMU support, and rewrite.
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ * PowerPC 8xx modifications.
+ * Copyright (c) 1998-1999 TiVo, Inc.
+ * PowerPC 403GCX modifications.
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * PowerPC 403GCX/405GP modifications.
+ * Copyright 2000 MontaVista Software Inc.
+ * PPC405 modifications
+ * PowerPC 403GCX/405GP modifications.
+ * Author: MontaVista Software, Inc.
+ * frank_rowand@mvista.com or source@mvista.com
+ * debbie_chu@mvista.com
+ *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
@@ -12,6 +32,22 @@
#include <asm/thread_info.h>
#include <asm/page.h>
+#ifdef CONFIG_MMU
+#include <asm/setup.h> /* COMMAND_LINE_SIZE */
+#include <asm/mmu.h>
+#include <asm/processor.h>
+
+.data
+.global empty_zero_page
+.align 12
+empty_zero_page:
+ .space 4096
+.global swapper_pg_dir
+swapper_pg_dir:
+ .space 4096
+
+#endif /* CONFIG_MMU */
+
.text
ENTRY(_start)
mfs r1, rmsr
@@ -32,6 +68,123 @@ _copy_fdt:
addik r3, r3, -4 /* descrement loop */
no_fdt_arg:
+#ifdef CONFIG_MMU
+
+#ifndef CONFIG_CMDLINE_BOOL
+/*
+ * handling command line
+ * copy command line to __init_end. There is space for storing command line.
+ */
+ or r6, r0, r0 /* incremment */
+ ori r4, r0, __init_end /* load address of command line */
+ tophys(r4,r4) /* convert to phys address */
+ ori r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
+_copy_command_line:
+ lbu r7, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */
+ sb r7, r4, r6 /* addr[r4+r6]= r7*/
+ addik r6, r6, 1 /* increment counting */
+ bgtid r3, _copy_command_line /* loop for all entries */
+ addik r3, r3, -1 /* descrement loop */
+ addik r5, r4, 0 /* add new space for command line */
+ tovirt(r5,r5)
+#endif /* CONFIG_CMDLINE_BOOL */
+
+#ifdef NOT_COMPILE
+/* save bram context */
+ or r6, r0, r0 /* incremment */
+ ori r4, r0, TOPHYS(_bram_load_start) /* save bram context */
+ ori r3, r0, (LMB_SIZE - 4)
+_copy_bram:
+ lw r7, r0, r6 /* r7 = r0 + r6 */
+ sw r7, r4, r6 /* addr[r4 + r6] = r7*/
+ addik r6, r6, 4 /* increment counting */
+ bgtid r3, _copy_bram /* loop for all entries */
+ addik r3, r3, -4 /* descrement loop */
+#endif
+ /* We have to turn on the MMU right away. */
+
+ /*
+ * Set up the initial MMU state so we can do the first level of
+ * kernel initialization. This maps the first 16 MBytes of memory 1:1
+ * virtual to physical.
+ */
+ nop
+ addik r3, r0, 63 /* Invalidate all TLB entries */
+_invalidate:
+ mts rtlbx, r3
+ mts rtlbhi, r0 /* flush: ensure V is clear */
+ bgtid r3, _invalidate /* loop for all entries */
+ addik r3, r3, -1
+ /* sync */
+
+ /*
+ * We should still be executing code at physical address area
+ * RAM_BASEADDR at this point. However, kernel code is at
+ * a virtual address. So, set up a TLB mapping to cover this once
+ * translation is enabled.
+ */
+
+ addik r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */
+ tophys(r4,r3) /* Load the kernel physical address */
+
+ mts rpid,r0 /* Load the kernel PID */
+ nop
+ bri 4
+
+ /*
+ * Configure and load two entries into TLB slots 0 and 1.
+ * In case we are pinning TLBs, these are reserved in by the
+ * other TLB functions. If not reserving, then it doesn't
+ * matter where they are loaded.
+ */
+ andi r4,r4,0xfffffc00 /* Mask off the real page number */
+ ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
+
+ andi r3,r3,0xfffffc00 /* Mask off the effective page number */
+ ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
+
+ mts rtlbx,r0 /* TLB slow 0 */
+
+ mts rtlblo,r4 /* Load the data portion of the entry */
+ mts rtlbhi,r3 /* Load the tag portion of the entry */
+
+ addik r4, r4, 0x01000000 /* Map next 16 M entries */
+ addik r3, r3, 0x01000000
+
+ ori r6,r0,1 /* TLB slot 1 */
+ mts rtlbx,r6
+
+ mts rtlblo,r4 /* Load the data portion of the entry */
+ mts rtlbhi,r3 /* Load the tag portion of the entry */
+
+ /*
+ * Load a TLB entry for LMB, since we need access to
+ * the exception vectors, using a 4k real==virtual mapping.
+ */
+ ori r6,r0,3 /* TLB slot 3 */
+ mts rtlbx,r6
+
+ ori r4,r0,(TLB_WR | TLB_EX)
+ ori r3,r0,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+ mts rtlblo,r4 /* Load the data portion of the entry */
+ mts rtlbhi,r3 /* Load the tag portion of the entry */
+
+ /*
+ * We now have the lower 16 Meg of RAM mapped into TLB entries, and the
+ * caches ready to work.
+ */
+turn_on_mmu:
+ ori r15,r0,start_here
+ ori r4,r0,MSR_KERNEL_VMS
+ mts rmsr,r4
+ nop
+ rted r15,0 /* enables MMU */
+ nop
+
+start_here:
+#endif /* CONFIG_MMU */
+
/* Initialize small data anchors */
la r13, r0, _KERNEL_SDA_BASE_
la r2, r0, _KERNEL_SDA2_BASE_
@@ -51,6 +204,43 @@ no_fdt_arg:
brald r15, r8
nop
+#ifndef CONFIG_MMU
la r15, r0, machine_halt
braid start_kernel
nop
+#else
+ /*
+ * Initialize the MMU.
+ */
+ bralid r15, mmu_init
+ nop
+
+ /* Go back to running unmapped so we can load up new values
+ * and change to using our exception vectors.
+ * On the MicroBlaze, all we invalidate the used TLB entries to clear
+ * the old 16M byte TLB mappings.
+ */
+ ori r15,r0,TOPHYS(kernel_load_context)
+ ori r4,r0,MSR_KERNEL
+ mts rmsr,r4
+ nop
+ bri 4
+ rted r15,0
+ nop
+
+ /* Load up the kernel context */
+kernel_load_context:
+ # Keep entry 0 and 1 valid. Entry 3 mapped to LMB can go away.
+ ori r5,r0,3
+ mts rtlbx,r5
+ nop
+ mts rtlbhi,r0
+ nop
+ addi r15, r0, machine_halt
+ ori r17, r0, start_kernel
+ ori r4, r0, MSR_KERNEL_VMS
+ mts rmsr, r4
+ nop
+ rted r17, 0 /* enable MMU and jump to start_kernel */
+ nop
+#endif /* CONFIG_MMU */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index cf9486d9983..9d591cd74fc 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -53,6 +53,12 @@
* - Illegal instruction opcode
* - Divide-by-zero
*
+ * - Privileged instruction exception (MMU)
+ * - Data storage exception (MMU)
+ * - Instruction storage exception (MMU)
+ * - Data TLB miss exception (MMU)
+ * - Instruction TLB miss exception (MMU)
+ *
* Note we disable interrupts during exception handling, otherwise we will
* possibly get multiple re-entrancy if interrupt handles themselves cause
* exceptions. JW
@@ -71,9 +77,24 @@
#include <asm/asm-offsets.h>
/* Helpful Macros */
+#ifndef CONFIG_MMU
#define EX_HANDLER_STACK_SIZ (4*19)
+#endif
#define NUM_TO_REG(num) r ## num
+#ifdef CONFIG_MMU
+/* FIXME you can't change first load of MSR because there is
+ * hardcoded jump bri 4 */
+ #define RESTORE_STATE \
+ lwi r3, r1, PT_R3; \
+ lwi r4, r1, PT_R4; \
+ lwi r5, r1, PT_R5; \
+ lwi r6, r1, PT_R6; \
+ lwi r11, r1, PT_R11; \
+ lwi r31, r1, PT_R31; \
+ lwi r1, r0, TOPHYS(r0_ram + 0);
+#endif /* CONFIG_MMU */
+
#define LWREG_NOP \
bri ex_handler_unhandled; \
nop;
@@ -106,6 +127,54 @@
or r3, r0, NUM_TO_REG (regnum); \
bri ex_sw_tail;
+#ifdef CONFIG_MMU
+ #define R3_TO_LWREG_VM_V(regnum) \
+ brid ex_lw_end_vm; \
+ swi r3, r7, 4 * regnum;
+
+ #define R3_TO_LWREG_VM(regnum) \
+ brid ex_lw_end_vm; \
+ or NUM_TO_REG (regnum), r0, r3;
+
+ #define SWREG_TO_R3_VM_V(regnum) \
+ brid ex_sw_tail_vm; \
+ lwi r3, r7, 4 * regnum;
+
+ #define SWREG_TO_R3_VM(regnum) \
+ brid ex_sw_tail_vm; \
+ or r3, r0, NUM_TO_REG (regnum);
+
+ /* Shift right instruction depending on available configuration */
+ #if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0
+ #define BSRLI(rD, rA, imm) \
+ bsrli rD, rA, imm
+ #elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0
+ #define BSRLI(rD, rA, imm) \
+ ori rD, r0, (1 << imm); \
+ idivu rD, rD, rA
+ #else
+ #define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA)
+ /* Only the used shift constants defined here - add more if needed */
+ #define BSRLI2(rD, rA) \
+ srl rD, rA; /* << 1 */ \
+ srl rD, rD; /* << 2 */
+ #define BSRLI10(rD, rA) \
+ srl rD, rA; /* << 1 */ \
+ srl rD, rD; /* << 2 */ \
+ srl rD, rD; /* << 3 */ \
+ srl rD, rD; /* << 4 */ \
+ srl rD, rD; /* << 5 */ \
+ srl rD, rD; /* << 6 */ \
+ srl rD, rD; /* << 7 */ \
+ srl rD, rD; /* << 8 */ \
+ srl rD, rD; /* << 9 */ \
+ srl rD, rD /* << 10 */
+ #define BSRLI20(rD, rA) \
+ BSRLI10(rD, rA); \
+ BSRLI10(rD, rD)
+ #endif
+#endif /* CONFIG_MMU */
+
.extern other_exception_handler /* Defined in exception.c */
/*
@@ -163,34 +232,119 @@
/* wrappers to restore state before coming to entry.S */
+#ifdef CONFIG_MMU
+.section .rodata
+.align 4
+_MB_HW_ExceptionVectorTable:
+/* 0 - Undefined */
+ .long TOPHYS(ex_handler_unhandled)
+/* 1 - Unaligned data access exception */
+ .long TOPHYS(handle_unaligned_ex)
+/* 2 - Illegal op-code exception */
+ .long TOPHYS(full_exception_trapw)
+/* 3 - Instruction bus error exception */
+ .long TOPHYS(full_exception_trapw)
+/* 4 - Data bus error exception */
+ .long TOPHYS(full_exception_trapw)
+/* 5 - Divide by zero exception */
+ .long TOPHYS(full_exception_trapw)
+/* 6 - Floating point unit exception */
+ .long TOPHYS(full_exception_trapw)
+/* 7 - Privileged instruction exception */
+ .long TOPHYS(full_exception_trapw)
+/* 8 - 15 - Undefined */
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+/* 16 - Data storage exception */
+ .long TOPHYS(handle_data_storage_exception)
+/* 17 - Instruction storage exception */
+ .long TOPHYS(handle_instruction_storage_exception)
+/* 18 - Data TLB miss exception */
+ .long TOPHYS(handle_data_tlb_miss_exception)
+/* 19 - Instruction TLB miss exception */
+ .long TOPHYS(handle_instruction_tlb_miss_exception)
+/* 20 - 31 - Undefined */
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+#endif
+
.global _hw_exception_handler
.section .text
.align 4
.ent _hw_exception_handler
_hw_exception_handler:
+#ifndef CONFIG_MMU
addik r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */
+#else
+ swi r1, r0, TOPHYS(r0_ram + 0); /* GET_SP */
+ /* Save date to kernel memory. Here is the problem
+ * when you came from user space */
+ ori r1, r0, TOPHYS(r0_ram + 28);
+#endif
swi r3, r1, PT_R3
swi r4, r1, PT_R4
swi r5, r1, PT_R5
swi r6, r1, PT_R6
- mfs r5, rmsr;
- nop
- swi r5, r1, 0;
- mfs r4, rbtr /* Save BTR before jumping to handler */
- nop
+#ifdef CONFIG_MMU
+ swi r11, r1, PT_R11
+ swi r31, r1, PT_R31
+ lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)) /* get saved current */
+#endif
+
mfs r3, resr
nop
+ mfs r4, rear;
+ nop
+#ifndef CONFIG_MMU
andi r5, r3, 0x1000; /* Check ESR[DS] */
beqi r5, not_in_delay_slot; /* Branch if ESR[DS] not set */
mfs r17, rbtr; /* ESR[DS] set - return address in BTR */
nop
not_in_delay_slot:
swi r17, r1, PT_R17
+#endif
andi r5, r3, 0x1F; /* Extract ESR[EXC] */
+#ifdef CONFIG_MMU
+ /* Calculate exception vector offset = r5 << 2 */
+ addk r6, r5, r5; /* << 1 */
+ addk r6, r6, r6; /* << 2 */
+
+/* counting which exception happen */
+ lwi r5, r0, 0x200 + TOPHYS(r0_ram)
+ addi r5, r5, 1
+ swi r5, r0, 0x200 + TOPHYS(r0_ram)
+ lwi r5, r6, 0x200 + TOPHYS(r0_ram)
+ addi r5, r5, 1
+ swi r5, r6, 0x200 + TOPHYS(r0_ram)
+/* end */
+ /* Load the HW Exception vector */
+ lwi r6, r6, TOPHYS(_MB_HW_ExceptionVectorTable)
+ bra r6
+
+full_exception_trapw:
+ RESTORE_STATE
+ bri full_exception_trap
+#else
/* Exceptions enabled here. This will allow nested exceptions */
mfs r6, rmsr;
nop
@@ -254,6 +408,7 @@ handle_other_ex: /* Handle Other exceptions here */
lwi r18, r1, PT_R18
bri ex_handler_done; /* Complete exception handling */
+#endif
/* 0x01 - Unaligned data access exception
* This occurs when a word access is not aligned on a word boundary,
@@ -265,11 +420,28 @@ handle_other_ex: /* Handle Other exceptions here */
handle_unaligned_ex:
/* Working registers already saved: R3, R4, R5, R6
* R3 = ESR
- * R4 = BTR
+ * R4 = EAR
*/
- mfs r4, rear;
+#ifdef CONFIG_MMU
+ andi r6, r3, 0x1000 /* Check ESR[DS] */
+ beqi r6, _no_delayslot /* Branch if ESR[DS] not set */
+ mfs r17, rbtr; /* ESR[DS] set - return address in BTR */
nop
+_no_delayslot:
+#endif
+
+#ifdef CONFIG_MMU
+ /* Check if unaligned address is last on a 4k page */
+ andi r5, r4, 0xffc
+ xori r5, r5, 0xffc
+ bnei r5, _unaligned_ex2
+ _unaligned_ex1:
+ RESTORE_STATE;
+/* Another page must be accessed or physical address not in page table */
+ bri unaligned_data_trap
+ _unaligned_ex2:
+#endif
andi r6, r3, 0x3E0; /* Mask and extract the register operand */
srl r6, r6; /* r6 >> 5 */
srl r6, r6;
@@ -278,6 +450,45 @@ handle_unaligned_ex:
srl r6, r6;
/* Store the register operand in a temporary location */
sbi r6, r0, TOPHYS(ex_reg_op);
+#ifdef CONFIG_MMU
+ /* Get physical address */
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ ori r5, r0, CONFIG_KERNEL_START
+ cmpu r5, r4, r5
+ bgti r5, _unaligned_ex3
+ ori r5, r0, swapper_pg_dir
+ bri _unaligned_ex4
+
+ /* Get the PGD for the current thread. */
+_unaligned_ex3: /* user thread */
+ addi r5 ,CURRENT_TASK, TOPHYS(0); /* get current task address */
+ lwi r5, r5, TASK_THREAD + PGDIR
+_unaligned_ex4:
+ tophys(r5,r5)
+ BSRLI(r6,r4,20) /* Create L1 (pgdir/pmd) address */
+ andi r6, r6, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r5,r5,0xfffff003" */
+ or r5, r5, r6
+ lwi r6, r5, 0 /* Get L1 entry */
+ andi r5, r6, 0xfffff000 /* Extract L2 (pte) base address. */
+ beqi r5, _unaligned_ex1 /* Bail if no table */
+
+ tophys(r5,r5)
+ BSRLI(r6,r4,10) /* Compute PTE address */
+ andi r6, r6, 0xffc
+ andi r5, r5, 0xfffff003
+ or r5, r5, r6
+ lwi r5, r5, 0 /* Get Linux PTE */
+
+ andi r6, r5, _PAGE_PRESENT
+ beqi r6, _unaligned_ex1 /* Bail if no page */
+
+ andi r5, r5, 0xfffff000 /* Extract RPN */
+ andi r4, r4, 0x00000fff /* Extract offset */
+ or r4, r4, r5 /* Create physical address */
+#endif /* CONFIG_MMU */
andi r6, r3, 0x400; /* Extract ESR[S] */
bnei r6, ex_sw;
@@ -355,6 +566,7 @@ ex_shw:
ex_sw_end: /* Exception handling of store word, ends. */
ex_handler_done:
+#ifndef CONFIG_MMU
lwi r5, r1, 0 /* RMSR */
mts rmsr, r5
nop
@@ -366,13 +578,455 @@ ex_handler_done:
rted r17, 0
addik r1, r1, (EX_HANDLER_STACK_SIZ); /* Restore stack frame */
+#else
+ RESTORE_STATE;
+ rted r17, 0
+ nop
+#endif
+
+#ifdef CONFIG_MMU
+ /* Exception vector entry code. This code runs with address translation
+ * turned off (i.e. using physical addresses). */
+
+ /* Exception vectors. */
+
+ /* 0x10 - Data Storage Exception
+ * This happens for just a few reasons. U0 set (but we don't do that),
+ * or zone protection fault (user violation, write to protected page).
+ * If this is just an update of modified status, we do that quickly
+ * and exit. Otherwise, we call heavyweight functions to do the work.
+ */
+ handle_data_storage_exception:
+ /* Working registers already saved: R3, R4, R5, R6
+ * R3 = ESR
+ */
+ mfs r11, rpid
+ nop
+ bri 4
+ mfs r3, rear /* Get faulting address */
+ nop
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ ori r4, r0, CONFIG_KERNEL_START
+ cmpu r4, r3, r4
+ bgti r4, ex3
+ /* First, check if it was a zone fault (which means a user
+ * tried to access a kernel or read-protected page - always
+ * a SEGV). All other faults here must be stores, so no
+ * need to check ESR_S as well. */
+ mfs r4, resr
+ nop
+ andi r4, r4, 0x800 /* ESR_Z - zone protection */
+ bnei r4, ex2
+
+ ori r4, r0, swapper_pg_dir
+ mts rpid, r0 /* TLB will have 0 TID */
+ nop
+ bri ex4
+
+ /* Get the PGD for the current thread. */
+ ex3:
+ /* First, check if it was a zone fault (which means a user
+ * tried to access a kernel or read-protected page - always
+ * a SEGV). All other faults here must be stores, so no
+ * need to check ESR_S as well. */
+ mfs r4, resr
+ nop
+ andi r4, r4, 0x800 /* ESR_Z */
+ bnei r4, ex2
+ /* get current task address */
+ addi r4 ,CURRENT_TASK, TOPHYS(0);
+ lwi r4, r4, TASK_THREAD+PGDIR
+ ex4:
+ tophys(r4,r4)
+ BSRLI(r5,r3,20) /* Create L1 (pgdir/pmd) address */
+ andi r5, r5, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+ or r4, r4, r5
+ lwi r4, r4, 0 /* Get L1 entry */
+ andi r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+ beqi r5, ex2 /* Bail if no table */
+
+ tophys(r5,r5)
+ BSRLI(r6,r3,10) /* Compute PTE address */
+ andi r6, r6, 0xffc
+ andi r5, r5, 0xfffff003
+ or r5, r5, r6
+ lwi r4, r5, 0 /* Get Linux PTE */
+
+ andi r6, r4, _PAGE_RW /* Is it writeable? */
+ beqi r6, ex2 /* Bail if not */
+
+ /* Update 'changed' */
+ ori r4, r4, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+ swi r4, r5, 0 /* Update Linux page table */
+
+ /* Most of the Linux PTE is ready to load into the TLB LO.
+ * We set ZSEL, where only the LS-bit determines user access.
+ * We set execute, because we don't have the granularity to
+ * properly set this at the page level (Linux problem).
+ * If shared is set, we cause a zero PID->TID load.
+ * Many of these bits are software only. Bits we don't set
+ * here we (properly should) assume have the appropriate value.
+ */
+ andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */
+ ori r4, r4, _PAGE_HWEXEC /* make it executable */
+
+ /* find the TLB index that caused the fault. It has to be here*/
+ mts rtlbsx, r3
+ nop
+ mfs r5, rtlbx /* DEBUG: TBD */
+ nop
+ mts rtlblo, r4 /* Load TLB LO */
+ nop
+ /* Will sync shadow TLBs */
+
+ /* Done...restore registers and get out of here. */
+ mts rpid, r11
+ nop
+ bri 4
+
+ RESTORE_STATE;
+ rted r17, 0
+ nop
+ ex2:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out. */
+ mts rpid, r11
+ nop
+ bri 4
+ RESTORE_STATE;
+ bri page_fault_data_trap
+
+
+ /* 0x11 - Instruction Storage Exception
+ * This is caused by a fetch from non-execute or guarded pages. */
+ handle_instruction_storage_exception:
+ /* Working registers already saved: R3, R4, R5, R6
+ * R3 = ESR
+ */
+
+ mfs r3, rear /* Get faulting address */
+ nop
+ RESTORE_STATE;
+ bri page_fault_instr_trap
+
+ /* 0x12 - Data TLB Miss Exception
+ * As the name implies, translation is not in the MMU, so search the
+ * page tables and fix it. The only purpose of this function is to
+ * load TLB entries from the page table if they exist.
+ */
+ handle_data_tlb_miss_exception:
+ /* Working registers already saved: R3, R4, R5, R6
+ * R3 = ESR
+ */
+ mfs r11, rpid
+ nop
+ bri 4
+ mfs r3, rear /* Get faulting address */
+ nop
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables. */
+ ori r4, r0, CONFIG_KERNEL_START
+ cmpu r4, r3, r4
+ bgti r4, ex5
+ ori r4, r0, swapper_pg_dir
+ mts rpid, r0 /* TLB will have 0 TID */
+ nop
+ bri ex6
+ /* Get the PGD for the current thread. */
+ ex5:
+ /* get current task address */
+ addi r4 ,CURRENT_TASK, TOPHYS(0);
+ lwi r4, r4, TASK_THREAD+PGDIR
+ ex6:
+ tophys(r4,r4)
+ BSRLI(r5,r3,20) /* Create L1 (pgdir/pmd) address */
+ andi r5, r5, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+ or r4, r4, r5
+ lwi r4, r4, 0 /* Get L1 entry */
+ andi r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+ beqi r5, ex7 /* Bail if no table */
+
+ tophys(r5,r5)
+ BSRLI(r6,r3,10) /* Compute PTE address */
+ andi r6, r6, 0xffc
+ andi r5, r5, 0xfffff003
+ or r5, r5, r6
+ lwi r4, r5, 0 /* Get Linux PTE */
+
+ andi r6, r4, _PAGE_PRESENT
+ beqi r6, ex7
+
+ ori r4, r4, _PAGE_ACCESSED
+ swi r4, r5, 0
+
+ /* Most of the Linux PTE is ready to load into the TLB LO.
+ * We set ZSEL, where only the LS-bit determines user access.
+ * We set execute, because we don't have the granularity to
+ * properly set this at the page level (Linux problem).
+ * If shared is set, we cause a zero PID->TID load.
+ * Many of these bits are software only. Bits we don't set
+ * here we (properly should) assume have the appropriate value.
+ */
+ andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */
+
+ bri finish_tlb_load
+ ex7:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+ mts rpid, r11
+ nop
+ bri 4
+ RESTORE_STATE;
+ bri page_fault_data_trap
+
+ /* 0x13 - Instruction TLB Miss Exception
+ * Nearly the same as above, except we get our information from
+ * different registers and bailout to a different point.
+ */
+ handle_instruction_tlb_miss_exception:
+ /* Working registers already saved: R3, R4, R5, R6
+ * R3 = ESR
+ */
+ mfs r11, rpid
+ nop
+ bri 4
+ mfs r3, rear /* Get faulting address */
+ nop
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ ori r4, r0, CONFIG_KERNEL_START
+ cmpu r4, r3, r4
+ bgti r4, ex8
+ ori r4, r0, swapper_pg_dir
+ mts rpid, r0 /* TLB will have 0 TID */
+ nop
+ bri ex9
+
+ /* Get the PGD for the current thread. */
+ ex8:
+ /* get current task address */
+ addi r4 ,CURRENT_TASK, TOPHYS(0);
+ lwi r4, r4, TASK_THREAD+PGDIR
+ ex9:
+ tophys(r4,r4)
+ BSRLI(r5,r3,20) /* Create L1 (pgdir/pmd) address */
+ andi r5, r5, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+ or r4, r4, r5
+ lwi r4, r4, 0 /* Get L1 entry */
+ andi r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+ beqi r5, ex10 /* Bail if no table */
+
+ tophys(r5,r5)
+ BSRLI(r6,r3,10) /* Compute PTE address */
+ andi r6, r6, 0xffc
+ andi r5, r5, 0xfffff003
+ or r5, r5, r6
+ lwi r4, r5, 0 /* Get Linux PTE */
+
+ andi r6, r4, _PAGE_PRESENT
+ beqi r6, ex7
+
+ ori r4, r4, _PAGE_ACCESSED
+ swi r4, r5, 0
+
+ /* Most of the Linux PTE is ready to load into the TLB LO.
+ * We set ZSEL, where only the LS-bit determines user access.
+ * We set execute, because we don't have the granularity to
+ * properly set this at the page level (Linux problem).
+ * If shared is set, we cause a zero PID->TID load.
+ * Many of these bits are software only. Bits we don't set
+ * here we (properly should) assume have the appropriate value.
+ */
+ andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */
+
+ bri finish_tlb_load
+ ex10:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+ mts rpid, r11
+ nop
+ bri 4
+ RESTORE_STATE;
+ bri page_fault_instr_trap
+
+/* Both the instruction and data TLB miss get to this point to load the TLB.
+ * r3 - EA of fault
+ * r4 - TLB LO (info from Linux PTE)
+ * r5, r6 - available to use
+ * PID - loaded with proper value when we get here
+ * Upon exit, we reload everything and RFI.
+ * A common place to load the TLB.
+ */
+ tlb_index:
+ .long 1 /* MS: storing last used tlb index */
+ finish_tlb_load:
+ /* MS: load the last used TLB index. */
+ lwi r5, r0, TOPHYS(tlb_index)
+ addik r5, r5, 1 /* MS: inc tlb_index -> use next one */
+
+/* MS: FIXME this is potential fault, because this is mask not count */
+ andi r5, r5, (MICROBLAZE_TLB_SIZE-1)
+ ori r6, r0, 1
+ cmp r31, r5, r6
+ blti r31, sem
+ addik r5, r6, 1
+ sem:
+ /* MS: save back current TLB index */
+ swi r5, r0, TOPHYS(tlb_index)
+
+ ori r4, r4, _PAGE_HWEXEC /* make it executable */
+ mts rtlbx, r5 /* MS: save current TLB */
+ nop
+ mts rtlblo, r4 /* MS: save to TLB LO */
+ nop
+
+ /* Create EPN. This is the faulting address plus a static
+ * set of bits. These are size, valid, E, U0, and ensure
+ * bits 20 and 21 are zero.
+ */
+ andi r3, r3, 0xfffff000
+ ori r3, r3, 0x0c0
+ mts rtlbhi, r3 /* Load TLB HI */
+ nop
+
+ /* Done...restore registers and get out of here. */
+ ex12:
+ mts rpid, r11
+ nop
+ bri 4
+ RESTORE_STATE;
+ rted r17, 0
+ nop
+
+ /* extern void giveup_fpu(struct task_struct *prev)
+ *
+ * The MicroBlaze processor may have an FPU, so this should not just
+ * return: TBD.
+ */
+ .globl giveup_fpu;
+ .align 4;
+ giveup_fpu:
+ bralid r15,0 /* TBD */
+ nop
+
+ /* At present, this routine just hangs. - extern void abort(void) */
+ .globl abort;
+ .align 4;
+ abort:
+ br r0
+
+ .globl set_context;
+ .align 4;
+ set_context:
+ mts rpid, r5 /* Shadow TLBs are automatically */
+ nop
+ bri 4 /* flushed by changing PID */
+ rtsd r15,8
+ nop
+
+#endif
.end _hw_exception_handler
+#ifdef CONFIG_MMU
+/* Unaligned data access exception last on a 4k page for MMU.
+ * When this is called, we are in virtual mode with exceptions enabled
+ * and registers 1-13,15,17,18 saved.
+ *
+ * R3 = ESR
+ * R4 = EAR
+ * R7 = pointer to saved registers (struct pt_regs *regs)
+ *
+ * This handler perform the access, and returns via ret_from_exc.
+ */
+.global _unaligned_data_exception
+.ent _unaligned_data_exception
+_unaligned_data_exception:
+ andi r8, r3, 0x3E0; /* Mask and extract the register operand */
+ BSRLI(r8,r8,2); /* r8 >> 2 = register operand * 8 */
+ andi r6, r3, 0x400; /* Extract ESR[S] */
+ bneid r6, ex_sw_vm;
+ andi r6, r3, 0x800; /* Extract ESR[W] - delay slot */
+ex_lw_vm:
+ beqid r6, ex_lhw_vm;
+ lbui r5, r4, 0; /* Exception address in r4 - delay slot */
+/* Load a word, byte-by-byte from destination address and save it in tmp space*/
+ la r6, r0, ex_tmp_data_loc_0;
+ sbi r5, r6, 0;
+ lbui r5, r4, 1;
+ sbi r5, r6, 1;
+ lbui r5, r4, 2;
+ sbi r5, r6, 2;
+ lbui r5, r4, 3;
+ sbi r5, r6, 3;
+ brid ex_lw_tail_vm;
+/* Get the destination register value into r3 - delay slot */
+ lwi r3, r6, 0;
+ex_lhw_vm:
+ /* Load a half-word, byte-by-byte from destination address and
+ * save it in tmp space */
+ la r6, r0, ex_tmp_data_loc_0;
+ sbi r5, r6, 0;
+ lbui r5, r4, 1;
+ sbi r5, r6, 1;
+ lhui r3, r6, 0; /* Get the destination register value into r3 */
+ex_lw_tail_vm:
+ /* Form load_word jump table offset (lw_table_vm + (8 * regnum)) */
+ addik r5, r8, lw_table_vm;
+ bra r5;
+ex_lw_end_vm: /* Exception handling of load word, ends */
+ brai ret_from_exc;
+ex_sw_vm:
+/* Form store_word jump table offset (sw_table_vm + (8 * regnum)) */
+ addik r5, r8, sw_table_vm;
+ bra r5;
+ex_sw_tail_vm:
+ la r5, r0, ex_tmp_data_loc_0;
+ beqid r6, ex_shw_vm;
+ swi r3, r5, 0; /* Get the word - delay slot */
+ /* Store the word, byte-by-byte into destination address */
+ lbui r3, r5, 0;
+ sbi r3, r4, 0;
+ lbui r3, r5, 1;
+ sbi r3, r4, 1;
+ lbui r3, r5, 2;
+ sbi r3, r4, 2;
+ lbui r3, r5, 3;
+ brid ret_from_exc;
+ sbi r3, r4, 3; /* Delay slot */
+ex_shw_vm:
+ /* Store the lower half-word, byte-by-byte into destination address */
+ lbui r3, r5, 2;
+ sbi r3, r4, 0;
+ lbui r3, r5, 3;
+ brid ret_from_exc;
+ sbi r3, r4, 1; /* Delay slot */
+ex_sw_end_vm: /* Exception handling of store word, ends. */
+.end _unaligned_data_exception
+#endif /* CONFIG_MMU */
+
ex_handler_unhandled:
/* FIXME add handle function for unhandled exception - dump register */
bri 0
+/*
+ * hw_exception_handler Jump Table
+ * - Contains code snippets for each register that caused the unalign exception
+ * - Hence exception handler is NOT self-modifying
+ * - Separate table for load exceptions and store exceptions.
+ * - Each table is of size: (8 * 32) = 256 bytes
+ */
+
.section .text
.align 4
lw_table:
@@ -407,7 +1061,11 @@ lw_r27: R3_TO_LWREG (27);
lw_r28: R3_TO_LWREG (28);
lw_r29: R3_TO_LWREG (29);
lw_r30: R3_TO_LWREG (30);
+#ifdef CONFIG_MMU
+lw_r31: R3_TO_LWREG_V (31);
+#else
lw_r31: R3_TO_LWREG (31);
+#endif
sw_table:
sw_r0: SWREG_TO_R3 (0);
@@ -441,7 +1099,81 @@ sw_r27: SWREG_TO_R3 (27);
sw_r28: SWREG_TO_R3 (28);
sw_r29: SWREG_TO_R3 (29);
sw_r30: SWREG_TO_R3 (30);
+#ifdef CONFIG_MMU
+sw_r31: SWREG_TO_R3_V (31);
+#else
sw_r31: SWREG_TO_R3 (31);
+#endif
+
+#ifdef CONFIG_MMU
+lw_table_vm:
+lw_r0_vm: R3_TO_LWREG_VM (0);
+lw_r1_vm: R3_TO_LWREG_VM_V (1);
+lw_r2_vm: R3_TO_LWREG_VM_V (2);
+lw_r3_vm: R3_TO_LWREG_VM_V (3);
+lw_r4_vm: R3_TO_LWREG_VM_V (4);
+lw_r5_vm: R3_TO_LWREG_VM_V (5);
+lw_r6_vm: R3_TO_LWREG_VM_V (6);
+lw_r7_vm: R3_TO_LWREG_VM_V (7);
+lw_r8_vm: R3_TO_LWREG_VM_V (8);
+lw_r9_vm: R3_TO_LWREG_VM_V (9);
+lw_r10_vm: R3_TO_LWREG_VM_V (10);
+lw_r11_vm: R3_TO_LWREG_VM_V (11);
+lw_r12_vm: R3_TO_LWREG_VM_V (12);
+lw_r13_vm: R3_TO_LWREG_VM_V (13);
+lw_r14_vm: R3_TO_LWREG_VM (14);
+lw_r15_vm: R3_TO_LWREG_VM_V (15);
+lw_r16_vm: R3_TO_LWREG_VM (16);
+lw_r17_vm: R3_TO_LWREG_VM_V (17);
+lw_r18_vm: R3_TO_LWREG_VM_V (18);
+lw_r19_vm: R3_TO_LWREG_VM (19);
+lw_r20_vm: R3_TO_LWREG_VM (20);
+lw_r21_vm: R3_TO_LWREG_VM (21);
+lw_r22_vm: R3_TO_LWREG_VM (22);
+lw_r23_vm: R3_TO_LWREG_VM (23);
+lw_r24_vm: R3_TO_LWREG_VM (24);
+lw_r25_vm: R3_TO_LWREG_VM (25);
+lw_r26_vm: R3_TO_LWREG_VM (26);
+lw_r27_vm: R3_TO_LWREG_VM (27);
+lw_r28_vm: R3_TO_LWREG_VM (28);
+lw_r29_vm: R3_TO_LWREG_VM (29);
+lw_r30_vm: R3_TO_LWREG_VM (30);
+lw_r31_vm: R3_TO_LWREG_VM_V (31);
+
+sw_table_vm:
+sw_r0_vm: SWREG_TO_R3_VM (0);
+sw_r1_vm: SWREG_TO_R3_VM_V (1);
+sw_r2_vm: SWREG_TO_R3_VM_V (2);
+sw_r3_vm: SWREG_TO_R3_VM_V (3);
+sw_r4_vm: SWREG_TO_R3_VM_V (4);
+sw_r5_vm: SWREG_TO_R3_VM_V (5);
+sw_r6_vm: SWREG_TO_R3_VM_V (6);
+sw_r7_vm: SWREG_TO_R3_VM_V (7);
+sw_r8_vm: SWREG_TO_R3_VM_V (8);
+sw_r9_vm: SWREG_TO_R3_VM_V (9);
+sw_r10_vm: SWREG_TO_R3_VM_V (10);
+sw_r11_vm: SWREG_TO_R3_VM_V (11);
+sw_r12_vm: SWREG_TO_R3_VM_V (12);
+sw_r13_vm: SWREG_TO_R3_VM_V (13);
+sw_r14_vm: SWREG_TO_R3_VM (14);
+sw_r15_vm: SWREG_TO_R3_VM_V (15);
+sw_r16_vm: SWREG_TO_R3_VM (16);
+sw_r17_vm: SWREG_TO_R3_VM_V (17);
+sw_r18_vm: SWREG_TO_R3_VM_V (18);
+sw_r19_vm: SWREG_TO_R3_VM (19);
+sw_r20_vm: SWREG_TO_R3_VM (20);
+sw_r21_vm: SWREG_TO_R3_VM (21);
+sw_r22_vm: SWREG_TO_R3_VM (22);
+sw_r23_vm: SWREG_TO_R3_VM (23);
+sw_r24_vm: SWREG_TO_R3_VM (24);
+sw_r25_vm: SWREG_TO_R3_VM (25);
+sw_r26_vm: SWREG_TO_R3_VM (26);
+sw_r27_vm: SWREG_TO_R3_VM (27);
+sw_r28_vm: SWREG_TO_R3_VM (28);
+sw_r29_vm: SWREG_TO_R3_VM (29);
+sw_r30_vm: SWREG_TO_R3_VM (30);
+sw_r31_vm: SWREG_TO_R3_VM_V (31);
+#endif /* CONFIG_MMU */
/* Temporary data structures used in the handler */
.section .data
diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c
index 5f71790e3c3..59ff20e33e0 100644
--- a/arch/microblaze/kernel/microblaze_ksyms.c
+++ b/arch/microblaze/kernel/microblaze_ksyms.c
@@ -45,3 +45,5 @@ extern void __udivsi3(void);
EXPORT_SYMBOL(__udivsi3);
extern void __umodsi3(void);
EXPORT_SYMBOL(__umodsi3);
+extern char *_ebss;
+EXPORT_SYMBOL_GPL(_ebss);
diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S
new file mode 100644
index 00000000000..df16c6287a8
--- /dev/null
+++ b/arch/microblaze/kernel/misc.S
@@ -0,0 +1,120 @@
+/*
+ * Miscellaneous low-level MMU functions.
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 Xilinx, Inc. All rights reserved.
+ *
+ * Derived from arch/ppc/kernel/misc.S
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <linux/errno.h>
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+ .text
+/*
+ * Flush MMU TLB
+ *
+ * We avoid flushing the pinned 0, 1 and possibly 2 entries.
+ */
+.globl _tlbia;
+.align 4;
+_tlbia:
+ addik r12, r0, 63 /* flush all entries (63 - 3) */
+ /* isync */
+_tlbia_1:
+ mts rtlbx, r12
+ nop
+ mts rtlbhi, r0 /* flush: ensure V is clear */
+ nop
+ addik r11, r12, -2
+ bneid r11, _tlbia_1 /* loop for all entries */
+ addik r12, r12, -1
+ /* sync */
+ rtsd r15, 8
+ nop
+
+/*
+ * Flush MMU TLB for a particular address (in r5)
+ */
+.globl _tlbie;
+.align 4;
+_tlbie:
+ mts rtlbsx, r5 /* look up the address in TLB */
+ nop
+ mfs r12, rtlbx /* Retrieve index */
+ nop
+ blti r12, _tlbie_1 /* Check if found */
+ mts rtlbhi, r0 /* flush: ensure V is clear */
+ nop
+_tlbie_1:
+ rtsd r15, 8
+ nop
+
+/*
+ * Allocate TLB entry for early console
+ */
+.globl early_console_reg_tlb_alloc;
+.align 4;
+early_console_reg_tlb_alloc:
+ /*
+ * Load a TLB entry for the UART, so that microblaze_progress() can use
+ * the UARTs nice and early. We use a 4k real==virtual mapping.
+ */
+ ori r4, r0, 63
+ mts rtlbx, r4 /* TLB slot 2 */
+
+ or r4,r5,r0
+ andi r4,r4,0xfffff000
+ ori r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
+
+ andi r5,r5,0xfffff000
+ ori r5,r5,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+ mts rtlblo,r4 /* Load the data portion of the entry */
+ nop
+ mts rtlbhi,r5 /* Load the tag portion of the entry */
+ nop
+ rtsd r15, 8
+ nop
+
+/*
+ * Copy a whole page (4096 bytes).
+ */
+#define COPY_16_BYTES \
+ lwi r7, r6, 0; \
+ lwi r8, r6, 4; \
+ lwi r9, r6, 8; \
+ lwi r10, r6, 12; \
+ swi r7, r5, 0; \
+ swi r8, r5, 4; \
+ swi r9, r5, 8; \
+ swi r10, r5, 12
+
+
+/* FIXME DCACHE_LINE_BYTES (CONFIG_XILINX_MICROBLAZE0_DCACHE_LINE_LEN * 4)*/
+#define DCACHE_LINE_BYTES (4 * 4)
+
+.globl copy_page;
+.align 4;
+copy_page:
+ ori r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1
+_copy_page_loop:
+ COPY_16_BYTES
+#if DCACHE_LINE_BYTES >= 32
+ COPY_16_BYTES
+#endif
+ addik r6, r6, DCACHE_LINE_BYTES
+ addik r5, r5, DCACHE_LINE_BYTES
+ bneid r11, _copy_page_loop
+ addik r11, r11, -1
+ rtsd r15, 8
+ nop
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 07d4fa339ed..00b12c6d532 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -126,9 +126,54 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
else
childregs->r1 = ((unsigned long) ti) + THREAD_SIZE;
+#ifndef CONFIG_MMU
memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
ti->cpu_context.r1 = (unsigned long)childregs;
ti->cpu_context.msr = (unsigned long)childregs->msr;
+#else
+
+ /* if creating a kernel thread then update the current reg (we don't
+ * want to use the parent's value when restoring by POP_STATE) */
+ if (kernel_mode(regs))
+ /* save new current on stack to use POP_STATE */
+ childregs->CURRENT_TASK = (unsigned long)p;
+ /* if returning to user then use the parent's value of this register */
+
+ /* if we're creating a new kernel thread then just zeroing all
+ * the registers. That's OK for a brand new thread.*/
+ /* Pls. note that some of them will be restored in POP_STATE */
+ if (kernel_mode(regs))
+ memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
+ /* if this thread is created for fork/vfork/clone, then we want to
+ * restore all the parent's context */
+ /* in addition to the registers which will be restored by POP_STATE */
+ else {
+ ti->cpu_context = *(struct cpu_context *)regs;
+ childregs->msr |= MSR_UMS;
+ }
+
+ /* FIXME STATE_SAVE_PT_OFFSET; */
+ ti->cpu_context.r1 = (unsigned long)childregs - STATE_SAVE_ARG_SPACE;
+ /* we should consider the fact that childregs is a copy of the parent
+ * regs which were saved immediately after entering the kernel state
+ * before enabling VM. This MSR will be restored in switch_to and
+ * RETURN() and we want to have the right machine state there
+ * specifically this state must have INTs disabled before and enabled
+ * after performing rtbd
+ * compose the right MSR for RETURN(). It will work for switch_to also
+ * excepting for VM and UMS
+ * don't touch UMS , CARRY and cache bits
+ * right now MSR is a copy of parent one */
+ childregs->msr |= MSR_BIP;
+ childregs->msr &= ~MSR_EIP;
+ childregs->msr |= MSR_IE;
+ childregs->msr &= ~MSR_VM;
+ childregs->msr |= MSR_VMS;
+ childregs->msr |= MSR_EE; /* exceptions will be enabled*/
+
+ ti->cpu_context.msr = (childregs->msr|MSR_VM);
+ ti->cpu_context.msr &= ~MSR_UMS; /* switch_to to kernel mode */
+#endif
ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8;
if (clone_flags & CLONE_SETTLS)
@@ -137,6 +182,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
return 0;
}
+#ifndef CONFIG_MMU
/*
* Return saved PC of a blocked thread.
*/
@@ -151,6 +197,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
else
return ctx->r14;
}
+#endif
static void kernel_thread_helper(int (*fn)(void *), void *arg)
{
@@ -173,6 +220,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
&regs, 0, NULL, NULL);
}
+EXPORT_SYMBOL_GPL(kernel_thread);
unsigned long get_wchan(struct task_struct *p)
{
@@ -188,3 +236,14 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
regs->r1 = usp;
regs->pt_mode = 0;
}
+
+#ifdef CONFIG_MMU
+#include <linux/elfcore.h>
+/*
+ * Set up a thread for executing a new program
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs)
+{
+ return 0; /* MicroBlaze has no separate FPU registers */
+}
+#endif /* CONFIG_MMU */
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 34c48718061..c005cc6f1aa 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -509,12 +509,13 @@ static void __init early_init_dt_check_for_initrd(unsigned long node)
prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
if (prop) {
- initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
+ initrd_start = (unsigned long)
+ __va((u32)of_read_ulong(prop, l/4));
prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
if (prop) {
initrd_end = (unsigned long)
- __va(of_read_ulong(prop, l/4));
+ __va((u32)of_read_ulong(prop, 1/4));
initrd_below_start_ok = 1;
} else {
initrd_start = 0;
@@ -563,7 +564,9 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
#ifdef CONFIG_CMDLINE
+#ifndef CONFIG_CMDLINE_FORCE
if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
+#endif
strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
#endif /* CONFIG_CMDLINE */
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index eb6b41758e2..8709bea0960 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -42,10 +42,6 @@ char cmd_line[COMMAND_LINE_SIZE];
void __init setup_arch(char **cmdline_p)
{
-#ifdef CONFIG_CMDLINE_FORCE
- strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
- strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
*cmdline_p = cmd_line;
console_verbose();
@@ -102,14 +98,34 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
{
unsigned long *src, *dst = (unsigned long *)0x0;
+ /* If CONFIG_MTD_UCLINUX is defined, assume ROMFS is at the
+ * end of kernel. There are two position which we want to check.
+ * The first is __init_end and the second __bss_start.
+ */
+#ifdef CONFIG_MTD_UCLINUX
+ int romfs_size;
+ unsigned int romfs_base;
+ char *old_klimit = klimit;
+
+ romfs_base = (ram ? ram : (unsigned int)&__init_end);
+ romfs_size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+ if (!romfs_size) {
+ romfs_base = (unsigned int)&__bss_start;
+ romfs_size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+ }
+
+ /* Move ROMFS out of BSS before clearing it */
+ if (romfs_size > 0) {
+ memmove(&_ebss, (int *)romfs_base, romfs_size);
+ klimit += romfs_size;
+ }
+#endif
+
/* clearing bss section */
memset(__bss_start, 0, __bss_stop-__bss_start);
memset(_ssbss, 0, _esbss-_ssbss);
- /*
- * Copy command line passed from bootloader, or use default
- * if none provided, or forced
- */
+ /* Copy command line passed from bootloader */
#ifndef CONFIG_CMDLINE_BOOL
if (cmdline && cmdline[0] != '\0')
strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE);
@@ -126,27 +142,15 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
#ifdef CONFIG_MTD_UCLINUX
- {
- int size;
- unsigned int romfs_base;
- romfs_base = (ram ? ram : (unsigned int)&__init_end);
- /* if CONFIG_MTD_UCLINUX_EBSS is defined, assume ROMFS is at the
- * end of kernel, which is ROMFS_LOCATION defined above. */
- size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
- early_printk("Found romfs @ 0x%08x (0x%08x)\n",
- romfs_base, size);
- early_printk("#### klimit %p ####\n", klimit);
- BUG_ON(size < 0); /* What else can we do? */
-
- /* Use memmove to handle likely case of memory overlap */
- early_printk("Moving 0x%08x bytes from 0x%08x to 0x%08x\n",
- size, romfs_base, (unsigned)&_ebss);
- memmove(&_ebss, (int *)romfs_base, size);
-
- /* update klimit */
- klimit += PAGE_ALIGN(size);
- early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
- }
+ early_printk("Found romfs @ 0x%08x (0x%08x)\n",
+ romfs_base, romfs_size);
+ early_printk("#### klimit %p ####\n", old_klimit);
+ BUG_ON(romfs_size < 0); /* What else can we do? */
+
+ early_printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
+ romfs_size, romfs_base, (unsigned)&_ebss);
+
+ early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
#endif
for (src = __ivt_start; src < __ivt_end; src++, dst++)
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 40d36931e36..4c0e6521b11 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -152,8 +152,8 @@ struct rt_sigframe {
unsigned long tramp[2]; /* signal trampoline */
};
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p)
+static int restore_sigcontext(struct pt_regs *regs,
+ struct sigcontext __user *sc, int *rval_p)
{
unsigned int err = 0;
@@ -211,11 +211,10 @@ badframe:
asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
{
- struct rt_sigframe *frame =
- (struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+ struct rt_sigframe __user *frame =
+ (struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE);
sigset_t set;
- stack_t st;
int rval;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -233,11 +232,10 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
goto badframe;
- if (__copy_from_user((void *)&st, &frame->uc.uc_stack, sizeof(st)))
- goto badframe;
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
- do_sigaltstack(&st, NULL, regs->r1);
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1))
+ goto badframe;
return rval;
@@ -251,7 +249,7 @@ badframe:
*/
static int
-setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
unsigned long mask)
{
int err = 0;
@@ -278,7 +276,7 @@ setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
/*
* Determine which stack to use..
*/
-static inline void *
+static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
{
/* Default to using normal stack */
@@ -287,87 +285,13 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && !on_sig_stack(sp))
sp = current->sas_ss_sp + current->sas_ss_size;
- return (void *)((sp - frame_size) & -8UL);
-}
-
-static void setup_frame(int sig, struct k_sigaction *ka,
- sigset_t *set, struct pt_regs *regs)
-{
- struct sigframe *frame;
- int err = 0;
- int signal;
-
- frame = get_sigframe(ka, regs, sizeof(*frame));
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
-
- signal = current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig;
-
- err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
- if (_NSIG_WORDS > 1) {
- err |= __copy_to_user(frame->extramask, &set->sig[1],
- sizeof(frame->extramask));
- }
-
- /* Set up to return from userspace. If provided, use a stub
- already in userspace. */
- /* minus 8 is offset to cater for "rtsd r15,8" offset */
- if (ka->sa.sa_flags & SA_RESTORER) {
- regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
- } else {
- /* Note, these encodings are _big endian_! */
-
- /* addi r12, r0, __NR_sigreturn */
- err |= __put_user(0x31800000 | __NR_sigreturn ,
- frame->tramp + 0);
- /* brki r14, 0x8 */
- err |= __put_user(0xb9cc0008, frame->tramp + 1);
-
- /* Return from sighandler will jump to the tramp.
- Negative 8 offset because return is rtsd r15, 8 */
- regs->r15 = ((unsigned long)frame->tramp)-8;
-
- __invalidate_cache_sigtramp((unsigned long)frame->tramp);
- }
-
- if (err)
- goto give_sigsegv;
-
- /* Set up registers for signal handler */
- regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
-
- /* Signal handler args: */
- regs->r5 = signal; /* Arg 0: signum */
- regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */
-
- /* Offset of 4 to handle microblaze rtid r14, 0 */
- regs->pc = (unsigned long)ka->sa.sa_handler;
-
- set_fs(USER_DS);
-
-#ifdef DEBUG_SIG
- printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n",
- current->comm, current->pid, frame, regs->pc);
-#endif
-
- return;
-
-give_sigsegv:
- if (sig == SIGSEGV)
- ka->sa.sa_handler = SIG_DFL;
- force_sig(SIGSEGV, current);
+ return (void __user *)((sp - frame_size) & -8UL);
}
static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
- struct rt_sigframe *frame;
+ struct rt_sigframe __user *frame;
int err = 0;
int signal;
@@ -382,7 +306,8 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
? current_thread_info()->exec_domain->signal_invmap[sig]
: sig;
- err |= copy_siginfo_to_user(&frame->info, info);
+ if (info)
+ err |= copy_siginfo_to_user(&frame->info, info);
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
@@ -463,7 +388,15 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
case -ERESTARTNOINTR:
do_restart:
/* offset of 4 bytes to re-execute trap (brki) instruction */
+#ifndef CONFIG_MMU
regs->pc -= 4;
+#else
+ /* offset of 8 bytes required = 4 for rtbd
+ offset, plus 4 for size of
+ "brki r14,8"
+ instruction. */
+ regs->pc -= 8;
+#endif
break;
}
}
@@ -480,7 +413,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
if (ka->sa.sa_flags & SA_SIGINFO)
setup_rt_frame(sig, ka, info, oldset, regs);
else
- setup_frame(sig, ka, oldset, regs);
+ setup_rt_frame(sig, ka, NULL, oldset, regs);
if (ka->sa.sa_flags & SA_ONESHOT)
ka->sa.sa_handler = SIG_DFL;
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 3bb42ec924c..376d1789f7c 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -2,7 +2,11 @@ ENTRY(sys_call_table)
.long sys_restart_syscall /* 0 - old "setup()" system call,
* used for restarting */
.long sys_exit
- .long sys_ni_syscall /* was fork */
+#ifdef CONFIG_MMU
+ .long sys_fork_wrapper
+#else
+ .long sys_ni_syscall
+#endif
.long sys_read
.long sys_write
.long sys_open /* 5 */
diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c
index 293ef486013..eaaaf805f31 100644
--- a/arch/microblaze/kernel/traps.c
+++ b/arch/microblaze/kernel/traps.c
@@ -22,14 +22,6 @@ void trap_init(void)
__enable_hw_exceptions();
}
-void __bad_xchg(volatile void *ptr, int size)
-{
- printk(KERN_INFO "xchg: bad data size: pc 0x%p, ptr 0x%p, size %d\n",
- __builtin_return_address(0), ptr, size);
- BUG();
-}
-EXPORT_SYMBOL(__bad_xchg);
-
static int kstack_depth_to_print = 24;
static int __init kstack_setup(char *s)
@@ -105,3 +97,37 @@ void dump_stack(void)
show_stack(NULL, NULL);
}
EXPORT_SYMBOL(dump_stack);
+
+#ifdef CONFIG_MMU
+void __bug(const char *file, int line, void *data)
+{
+ if (data)
+ printk(KERN_CRIT "kernel BUG at %s:%d (data = %p)!\n",
+ file, line, data);
+ else
+ printk(KERN_CRIT "kernel BUG at %s:%d!\n", file, line);
+
+ machine_halt();
+}
+
+int bad_trap(int trap_num, struct pt_regs *regs)
+{
+ printk(KERN_CRIT
+ "unimplemented trap %d called at 0x%08lx, pid %d!\n",
+ trap_num, regs->pc, current->pid);
+ return -ENOSYS;
+}
+
+int debug_trap(struct pt_regs *regs)
+{
+ int i;
+ printk(KERN_CRIT "debug trap\n");
+ for (i = 0; i < 32; i++) {
+ /* printk("r%i:%08X\t",i,regs->gpr[i]); */
+ if ((i % 4) == 3)
+ printk(KERN_CRIT "\n");
+ }
+ printk(KERN_CRIT "pc:%08lX\tmsr:%08lX\n", regs->pc, regs->msr);
+ return -ENOSYS;
+}
+#endif
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index 840385e5129..8ae807ab7a5 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -17,8 +17,7 @@ ENTRY(_start)
jiffies = jiffies_64 + 4;
SECTIONS {
- . = CONFIG_KERNEL_BASE_ADDR;
-
+ . = CONFIG_KERNEL_START;
.text : {
_text = . ;
_stext = . ;
@@ -132,6 +131,8 @@ SECTIONS {
__con_initcall_end = .;
}
+ SECURITY_INIT
+
__init_end_before_initramfs = .;
.init.ramfs ALIGN(4096) : {
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index d27126bf306..71c8cb6c9e4 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -10,4 +10,5 @@ else
lib-y += memcpy.o memmove.o
endif
-lib-y += uaccess.o
+lib-$(CONFIG_NO_MMU) += uaccess.o
+lib-$(CONFIG_MMU) += uaccess_old.o
diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c
index 809340070a1..f08e7459141 100644
--- a/arch/microblaze/lib/checksum.c
+++ b/arch/microblaze/lib/checksum.c
@@ -32,9 +32,10 @@
/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
kills, so most of the assembly has to go. */
-#include <net/checksum.h>
-#include <asm/checksum.h>
#include <linux/module.h>
+#include <net/checksum.h>
+
+#include <asm/byteorder.h>
static inline unsigned short from32to16(unsigned long x)
{
@@ -102,6 +103,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
{
return (__force __sum16)~do_csum(iph, ihl*4);
}
+EXPORT_SYMBOL(ip_fast_csum);
/*
* computes the checksum of a memory block at buff, length len,
@@ -115,15 +117,16 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
*
* it's best to have buff aligned on a 32-bit boundary
*/
-__wsum csum_partial(const void *buff, int len, __wsum sum)
+__wsum csum_partial(const void *buff, int len, __wsum wsum)
{
+ unsigned int sum = (__force unsigned int)wsum;
unsigned int result = do_csum(buff, len);
/* add in old sum, and carry.. */
result += sum;
if (sum > result)
result += 1;
- return result;
+ return (__force __wsum)result;
}
EXPORT_SYMBOL(csum_partial);
@@ -131,9 +134,9 @@ EXPORT_SYMBOL(csum_partial);
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
*/
-__sum16 ip_compute_csum(const unsigned char *buff, int len)
+__sum16 ip_compute_csum(const void *buff, int len)
{
- return ~do_csum(buff, len);
+ return (__force __sum16)~do_csum(buff, len);
}
EXPORT_SYMBOL(ip_compute_csum);
@@ -141,12 +144,18 @@ EXPORT_SYMBOL(ip_compute_csum);
* copy from fs while checksumming, otherwise like csum_partial
*/
__wsum
-csum_partial_copy_from_user(const char __user *src, char *dst, int len,
- int sum, int *csum_err)
+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+ __wsum sum, int *csum_err)
{
- if (csum_err)
+ int missing;
+
+ missing = __copy_from_user(dst, src, len);
+ if (missing) {
+ memset(dst + len - missing, 0, missing);
+ *csum_err = -EFAULT;
+ } else
*csum_err = 0;
- memcpy(dst, src, len);
+
return csum_partial(dst, len, sum);
}
EXPORT_SYMBOL(csum_partial_copy_from_user);
@@ -155,7 +164,7 @@ EXPORT_SYMBOL(csum_partial_copy_from_user);
* copy from ds while checksumming, otherwise like csum_partial
*/
__wsum
-csum_partial_copy(const char *src, char *dst, int len, int sum)
+csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
{
memcpy(dst, src, len);
return csum_partial(dst, len, sum);
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
index 5880119c448..6a907c58a4b 100644
--- a/arch/microblaze/lib/memcpy.c
+++ b/arch/microblaze/lib/memcpy.c
@@ -154,8 +154,3 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
}
EXPORT_SYMBOL(memcpy);
#endif /* __HAVE_ARCH_MEMCPY */
-
-void *cacheable_memcpy(void *d, const void *s, __kernel_size_t c)
-{
- return memcpy(d, s, c);
-}
diff --git a/arch/microblaze/lib/uaccess_old.S b/arch/microblaze/lib/uaccess_old.S
new file mode 100644
index 00000000000..67f991c14b8
--- /dev/null
+++ b/arch/microblaze/lib/uaccess_old.S
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ * Copyright (C) 2007 LynuxWorks, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/linkage.h>
+
+/*
+ * int __strncpy_user(char *to, char *from, int len);
+ *
+ * Returns:
+ * -EFAULT for an exception
+ * len if we hit the buffer limit
+ * bytes copied
+ */
+
+ .text
+.globl __strncpy_user;
+.align 4;
+__strncpy_user:
+
+ /*
+ * r5 - to
+ * r6 - from
+ * r7 - len
+ * r3 - temp count
+ * r4 - temp val
+ */
+ addik r3,r7,0 /* temp_count = len */
+ beqi r3,3f
+1:
+ lbu r4,r6,r0
+ sb r4,r5,r0
+
+ addik r3,r3,-1
+ beqi r3,2f /* break on len */
+
+ addik r5,r5,1
+ bneid r4,1b
+ addik r6,r6,1 /* delay slot */
+ addik r3,r3,1 /* undo "temp_count--" */
+2:
+ rsubk r3,r3,r7 /* temp_count = len - temp_count */
+3:
+ rtsd r15,8
+ nop
+
+
+ .section .fixup, "ax"
+ .align 2
+4:
+ brid 3b
+ addik r3,r0, -EFAULT
+
+ .section __ex_table, "a"
+ .word 1b,4b
+
+/*
+ * int __strnlen_user(char __user *str, int maxlen);
+ *
+ * Returns:
+ * 0 on error
+ * maxlen + 1 if no NUL byte found within maxlen bytes
+ * size of the string (including NUL byte)
+ */
+
+ .text
+.globl __strnlen_user;
+.align 4;
+__strnlen_user:
+ addik r3,r6,0
+ beqi r3,3f
+1:
+ lbu r4,r5,r0
+ beqid r4,2f /* break on NUL */
+ addik r3,r3,-1 /* delay slot */
+
+ bneid r3,1b
+ addik r5,r5,1 /* delay slot */
+
+ addik r3,r3,-1 /* for break on len */
+2:
+ rsubk r3,r3,r6
+3:
+ rtsd r15,8
+ nop
+
+
+ .section .fixup,"ax"
+4:
+ brid 3b
+ addk r3,r0,r0
+
+ .section __ex_table,"a"
+ .word 1b,4b
+
+/*
+ * int __copy_tofrom_user(char *to, char *from, int len)
+ * Return:
+ * 0 on success
+ * number of not copied bytes on error
+ */
+ .text
+.globl __copy_tofrom_user;
+.align 4;
+__copy_tofrom_user:
+ /*
+ * r5 - to
+ * r6 - from
+ * r7, r3 - count
+ * r4 - tempval
+ */
+ addik r3,r7,0
+ beqi r3,3f
+1:
+ lbu r4,r6,r0
+ addik r6,r6,1
+2:
+ sb r4,r5,r0
+ addik r3,r3,-1
+ bneid r3,1b
+ addik r5,r5,1 /* delay slot */
+3:
+ rtsd r15,8
+ nop
+
+
+ .section __ex_table,"a"
+ .word 1b,3b,2b,3b
diff --git a/arch/microblaze/mm/Makefile b/arch/microblaze/mm/Makefile
index bf9e4479a1f..6c8a924d9e2 100644
--- a/arch/microblaze/mm/Makefile
+++ b/arch/microblaze/mm/Makefile
@@ -3,3 +3,5 @@
#
obj-y := init.o
+
+obj-$(CONFIG_MMU) += pgtable.o mmu_context.o fault.o
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
new file mode 100644
index 00000000000..5e67cd1fab4
--- /dev/null
+++ b/arch/microblaze/mm/fault.c
@@ -0,0 +1,304 @@
+/*
+ * arch/microblaze/mm/fault.c
+ *
+ * Copyright (C) 2007 Xilinx, Inc. All rights reserved.
+ *
+ * Derived from "arch/ppc/mm/fault.c"
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Derived from "arch/i386/mm/fault.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * Modified by Cort Dougan and Paul Mackerras.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+#include <asm/system.h>
+#include <linux/uaccess.h>
+#include <asm/exceptions.h>
+
+#if defined(CONFIG_KGDB)
+int debugger_kernel_faults = 1;
+#endif
+
+static unsigned long pte_misses; /* updated by do_page_fault() */
+static unsigned long pte_errors; /* updated by do_page_fault() */
+
+/*
+ * Check whether the instruction at regs->pc is a store using
+ * an update addressing form which will update r1.
+ */
+static int store_updates_sp(struct pt_regs *regs)
+{
+ unsigned int inst;
+
+ if (get_user(inst, (unsigned int *)regs->pc))
+ return 0;
+ /* check for 1 in the rD field */
+ if (((inst >> 21) & 0x1f) != 1)
+ return 0;
+ /* check for store opcodes */
+ if ((inst & 0xd0000000) == 0xd0000000)
+ return 1;
+ return 0;
+}
+
+
+/*
+ * bad_page_fault is called when we have a bad access from the kernel.
+ * It is called from do_page_fault above and from some of the procedures
+ * in traps.c.
+ */
+static void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+{
+ const struct exception_table_entry *fixup;
+/* MS: no context */
+ /* Are we prepared to handle this fault? */
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return;
+ }
+
+ /* kernel has accessed a bad area */
+#if defined(CONFIG_KGDB)
+ if (debugger_kernel_faults)
+ debugger(regs);
+#endif
+ die("kernel access of bad area", regs, sig);
+}
+
+/*
+ * The error_code parameter is ESR for a data fault,
+ * 0 for an instruction fault.
+ */
+void do_page_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
+{
+ struct vm_area_struct *vma;
+ struct mm_struct *mm = current->mm;
+ siginfo_t info;
+ int code = SEGV_MAPERR;
+ int is_write = error_code & ESR_S;
+ int fault;
+
+ regs->ear = address;
+ regs->esr = error_code;
+
+ /* On a kernel SLB miss we can only check for a valid exception entry */
+ if (kernel_mode(regs) && (address >= TASK_SIZE)) {
+ printk(KERN_WARNING "kernel task_size exceed");
+ _exception(SIGSEGV, regs, code, address);
+ }
+
+ /* for instr TLB miss and instr storage exception ESR_S is undefined */
+ if ((error_code & 0x13) == 0x13 || (error_code & 0x11) == 0x11)
+ is_write = 0;
+
+#if defined(CONFIG_KGDB)
+ if (debugger_fault_handler && regs->trap == 0x300) {
+ debugger_fault_handler(regs);
+ return;
+ }
+#endif /* CONFIG_KGDB */
+
+ if (in_atomic() || mm == NULL) {
+ /* FIXME */
+ if (kernel_mode(regs)) {
+ printk(KERN_EMERG
+ "Page fault in kernel mode - Oooou!!! pid %d\n",
+ current->pid);
+ _exception(SIGSEGV, regs, code, address);
+ return;
+ }
+ /* in_atomic() in user mode is really bad,
+ as is current->mm == NULL. */
+ printk(KERN_EMERG "Page fault in user mode with "
+ "in_atomic(), mm = %p\n", mm);
+ printk(KERN_EMERG "r15 = %lx MSR = %lx\n",
+ regs->r15, regs->msr);
+ die("Weird page fault", regs, SIGSEGV);
+ }
+
+ /* When running in the kernel we expect faults to occur only to
+ * addresses in user space. All other faults represent errors in the
+ * kernel and should generate an OOPS. Unfortunately, in the case of an
+ * erroneous fault occurring in a code path which already holds mmap_sem
+ * we will deadlock attempting to validate the fault against the
+ * address space. Luckily the kernel only validly references user
+ * space from well defined areas of code, which are listed in the
+ * exceptions table.
+ *
+ * As the vast majority of faults will be valid we will only perform
+ * the source reference check when there is a possibility of a deadlock.
+ * Attempt to lock the address space, if we cannot we then validate the
+ * source. If this is invalid we can skip the address space check,
+ * thus avoiding the deadlock.
+ */
+ if (!down_read_trylock(&mm->mmap_sem)) {
+ if (kernel_mode(regs) && !search_exception_tables(regs->pc))
+ goto bad_area_nosemaphore;
+
+ down_read(&mm->mmap_sem);
+ }
+
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
+
+ if (vma->vm_start <= address)
+ goto good_area;
+
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+
+ if (!is_write)
+ goto bad_area;
+
+ /*
+ * N.B. The ABI allows programs to access up to
+ * a few hundred bytes below the stack pointer (TBD).
+ * The kernel signal delivery code writes up to about 1.5kB
+ * below the stack pointer (r1) before decrementing it.
+ * The exec code can write slightly over 640kB to the stack
+ * before setting the user r1. Thus we allow the stack to
+ * expand to 1MB without further checks.
+ */
+ if (address + 0x100000 < vma->vm_end) {
+
+ /* get user regs even if this fault is in kernel mode */
+ struct pt_regs *uregs = current->thread.regs;
+ if (uregs == NULL)
+ goto bad_area;
+
+ /*
+ * A user-mode access to an address a long way below
+ * the stack pointer is only valid if the instruction
+ * is one which would update the stack pointer to the
+ * address accessed if the instruction completed,
+ * i.e. either stwu rs,n(r1) or stwux rs,r1,rb
+ * (or the byte, halfword, float or double forms).
+ *
+ * If we don't check this then any write to the area
+ * between the last mapped region and the stack will
+ * expand the stack rather than segfaulting.
+ */
+ if (address + 2048 < uregs->r1
+ && (kernel_mode(regs) || !store_updates_sp(regs)))
+ goto bad_area;
+ }
+ if (expand_stack(vma, address))
+ goto bad_area;
+
+good_area:
+ code = SEGV_ACCERR;
+
+ /* a write */
+ if (is_write) {
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ /* a read */
+ } else {
+ /* protection fault */
+ if (error_code & 0x08000000)
+ goto bad_area;
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto bad_area;
+ }
+
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+survive:
+ fault = handle_mm_fault(mm, vma, address, is_write);
+ if (unlikely(fault & VM_FAULT_ERROR)) {
+ if (fault & VM_FAULT_OOM)
+ goto out_of_memory;
+ else if (fault & VM_FAULT_SIGBUS)
+ goto do_sigbus;
+ BUG();
+ }
+ if (fault & VM_FAULT_MAJOR)
+ current->maj_flt++;
+ else
+ current->min_flt++;
+ up_read(&mm->mmap_sem);
+ /*
+ * keep track of tlb+htab misses that are good addrs but
+ * just need pte's created via handle_mm_fault()
+ * -- Cort
+ */
+ pte_misses++;
+ return;
+
+bad_area:
+ up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+ pte_errors++;
+
+ /* User mode accesses cause a SIGSEGV */
+ if (user_mode(regs)) {
+ _exception(SIGSEGV, regs, code, address);
+/* info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ info.si_code = code;
+ info.si_addr = (void *) address;
+ force_sig_info(SIGSEGV, &info, current);*/
+ return;
+ }
+
+ bad_page_fault(regs, address, SIGSEGV);
+ return;
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ if (current->pid == 1) {
+ yield();
+ down_read(&mm->mmap_sem);
+ goto survive;
+ }
+ up_read(&mm->mmap_sem);
+ printk(KERN_WARNING "VM: killing process %s\n", current->comm);
+ if (user_mode(regs))
+ do_exit(SIGKILL);
+ bad_page_fault(regs, address, SIGKILL);
+ return;
+
+do_sigbus:
+ up_read(&mm->mmap_sem);
+ if (user_mode(regs)) {
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRERR;
+ info.si_addr = (void __user *)address;
+ force_sig_info(SIGBUS, &info, current);
+ return;
+ }
+ bad_page_fault(regs, address, SIGBUS);
+}
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index b0c8213cd6c..b5a701cd71e 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -23,8 +23,16 @@
#include <asm/sections.h>
#include <asm/tlb.h>
+#ifndef CONFIG_MMU
unsigned int __page_offset;
-/* EXPORT_SYMBOL(__page_offset); */
+EXPORT_SYMBOL(__page_offset);
+
+#else
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+int mem_init_done;
+static int init_bootmem_done;
+#endif /* CONFIG_MMU */
char *klimit = _end;
@@ -32,28 +40,26 @@ char *klimit = _end;
* Initialize the bootmem system and give it all the memory we
* have available.
*/
-unsigned int memory_start;
-unsigned int memory_end; /* due to mm/nommu.c */
-unsigned int memory_size;
+unsigned long memory_start;
+unsigned long memory_end; /* due to mm/nommu.c */
+unsigned long memory_size;
/*
* paging_init() sets up the page tables - in fact we've already done this.
*/
static void __init paging_init(void)
{
- int i;
unsigned long zones_size[MAX_NR_ZONES];
+ /* Clean every zones */
+ memset(zones_size, 0, sizeof(zones_size));
+
/*
* old: we can DMA to/from any address.put all page into ZONE_DMA
* We use only ZONE_NORMAL
*/
zones_size[ZONE_NORMAL] = max_mapnr;
- /* every other zones are empty */
- for (i = 1; i < MAX_NR_ZONES; i++)
- zones_size[i] = 0;
-
free_area_init(zones_size);
}
@@ -61,6 +67,7 @@ void __init setup_memory(void)
{
int i;
unsigned long map_size;
+#ifndef CONFIG_MMU
u32 kernel_align_start, kernel_align_size;
/* Find main memory where is the kernel */
@@ -93,6 +100,7 @@ void __init setup_memory(void)
__func__, kernel_align_start, kernel_align_start
+ kernel_align_size, kernel_align_size);
+#endif
/*
* Kernel:
* start: base phys address of kernel - page align
@@ -121,9 +129,13 @@ void __init setup_memory(void)
* for 4GB of memory, using 4kB pages), plus 1 page
* (in case the address isn't page-aligned).
*/
+#ifndef CONFIG_MMU
map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)),
min_low_pfn, max_low_pfn);
-
+#else
+ map_size = init_bootmem_node(&contig_page_data,
+ PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn);
+#endif
lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size);
/* free bootmem is whole main memory */
@@ -137,6 +149,9 @@ void __init setup_memory(void)
reserve_bootmem(lmb.reserved.region[i].base,
lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
}
+#ifdef CONFIG_MMU
+ init_bootmem_done = 1;
+#endif
paging_init();
}
@@ -191,11 +206,145 @@ void __init mem_init(void)
printk(KERN_INFO "Memory: %luk/%luk available\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
num_physpages << (PAGE_SHIFT-10));
+#ifdef CONFIG_MMU
+ mem_init_done = 1;
+#endif
}
+#ifndef CONFIG_MMU
/* Check against bounds of physical memory */
int ___range_ok(unsigned long addr, unsigned long size)
{
return ((addr < memory_start) ||
((addr + size) > memory_end));
}
+EXPORT_SYMBOL(___range_ok);
+
+#else
+int page_is_ram(unsigned long pfn)
+{
+ return pfn < max_low_pfn;
+}
+
+/*
+ * Check for command-line options that affect what MMU_init will do.
+ */
+static void mm_cmdline_setup(void)
+{
+ unsigned long maxmem = 0;
+ char *p = cmd_line;
+
+ /* Look for mem= option on command line */
+ p = strstr(cmd_line, "mem=");
+ if (p) {
+ p += 4;
+ maxmem = memparse(p, &p);
+ if (maxmem && memory_size > maxmem) {
+ memory_size = maxmem;
+ memory_end = memory_start + memory_size;
+ lmb.memory.region[0].size = memory_size;
+ }
+ }
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+static void __init mmu_init_hw(void)
+{
+ /*
+ * The Zone Protection Register (ZPR) defines how protection will
+ * be applied to every page which is a member of a given zone. At
+ * present, we utilize only two of the zones.
+ * The zone index bits (of ZSEL) in the PTE are used for software
+ * indicators, except the LSB. For user access, zone 1 is used,
+ * for kernel access, zone 0 is used. We set all but zone 1
+ * to zero, allowing only kernel access as indicated in the PTE.
+ * For zone 1, we set a 01 binary (a value of 10 will not work)
+ * to allow user access as indicated in the PTE. This also allows
+ * kernel access as indicated in the PTE.
+ */
+ __asm__ __volatile__ ("ori r11, r0, 0x10000000;" \
+ "mts rzpr, r11;"
+ : : : "r11");
+}
+
+/*
+ * MMU_init sets up the basic memory mappings for the kernel,
+ * including both RAM and possibly some I/O regions,
+ * and sets up the page tables and the MMU hardware ready to go.
+ */
+
+/* called from head.S */
+asmlinkage void __init mmu_init(void)
+{
+ unsigned int kstart, ksize;
+
+ if (!lmb.reserved.cnt) {
+ printk(KERN_EMERG "Error memory count\n");
+ machine_restart(NULL);
+ }
+
+ if ((u32) lmb.memory.region[0].size < 0x1000000) {
+ printk(KERN_EMERG "Memory must be greater than 16MB\n");
+ machine_restart(NULL);
+ }
+ /* Find main memory where the kernel is */
+ memory_start = (u32) lmb.memory.region[0].base;
+ memory_end = (u32) lmb.memory.region[0].base +
+ (u32) lmb.memory.region[0].size;
+ memory_size = memory_end - memory_start;
+
+ mm_cmdline_setup(); /* FIXME parse args from command line - not used */
+
+ /*
+ * Map out the kernel text/data/bss from the available physical
+ * memory.
+ */
+ kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
+ /* kernel size */
+ ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
+ lmb_reserve(kstart, ksize);
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /* Remove the init RAM disk from the available memory. */
+/* if (initrd_start) {
+ mem_pieces_remove(&phys_avail, __pa(initrd_start),
+ initrd_end - initrd_start, 1);
+ }*/
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Initialize the MMU hardware */
+ mmu_init_hw();
+
+ /* Map in all of RAM starting at CONFIG_KERNEL_START */
+ mapin_ram();
+
+#ifdef HIGHMEM_START_BOOL
+ ioremap_base = HIGHMEM_START;
+#else
+ ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */
+#endif /* CONFIG_HIGHMEM */
+ ioremap_bot = ioremap_base;
+
+ /* Initialize the context management stuff */
+ mmu_context_init();
+}
+
+/* This is only called until mem_init is done. */
+void __init *early_get_page(void)
+{
+ void *p;
+ if (init_bootmem_done) {
+ p = alloc_bootmem_pages(PAGE_SIZE);
+ } else {
+ /*
+ * Mem start + 32MB -> here is limit
+ * because of mem mapping from head.S
+ */
+ p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+ memory_start + 0x2000000));
+ }
+ return p;
+}
+#endif /* CONFIG_MMU */
diff --git a/arch/microblaze/mm/mmu_context.c b/arch/microblaze/mm/mmu_context.c
new file mode 100644
index 00000000000..26ff82f4fa8
--- /dev/null
+++ b/arch/microblaze/mm/mmu_context.c
@@ -0,0 +1,70 @@
+/*
+ * This file contains the routines for handling the MMU.
+ *
+ * Copyright (C) 2007 Xilinx, Inc. All rights reserved.
+ *
+ * Derived from arch/ppc/mm/4xx_mmu.c:
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+
+mm_context_t next_mmu_context;
+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+atomic_t nr_free_contexts;
+struct mm_struct *context_mm[LAST_CONTEXT+1];
+
+/*
+ * Initialize the context management stuff.
+ */
+void __init mmu_context_init(void)
+{
+ /*
+ * The use of context zero is reserved for the kernel.
+ * This code assumes FIRST_CONTEXT < 32.
+ */
+ context_map[0] = (1 << FIRST_CONTEXT) - 1;
+ next_mmu_context = FIRST_CONTEXT;
+ atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
+}
+
+/*
+ * Steal a context from a task that has one at the moment.
+ *
+ * This isn't an LRU system, it just frees up each context in
+ * turn (sort-of pseudo-random replacement :). This would be the
+ * place to implement an LRU scheme if anyone were motivated to do it.
+ */
+void steal_context(void)
+{
+ struct mm_struct *mm;
+
+ /* free up context `next_mmu_context' */
+ /* if we shouldn't free context 0, don't... */
+ if (next_mmu_context < FIRST_CONTEXT)
+ next_mmu_context = FIRST_CONTEXT;
+ mm = context_mm[next_mmu_context];
+ flush_tlb_mm(mm);
+ destroy_context(mm);
+}
diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c
new file mode 100644
index 00000000000..46c4ca5d15c
--- /dev/null
+++ b/arch/microblaze/mm/pgtable.c
@@ -0,0 +1,286 @@
+/*
+ * This file contains the routines setting up the linux page tables.
+ *
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ *
+ * Copyright (C) 2007 Xilinx, Inc. All rights reserved.
+ *
+ * Derived from arch/ppc/mm/pgtable.c:
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <linux/io.h>
+#include <asm/mmu.h>
+#include <asm/sections.h>
+
+#define flush_HPTE(X, va, pg) _tlbie(va)
+
+unsigned long ioremap_base;
+unsigned long ioremap_bot;
+
+/* The maximum lowmem defaults to 768Mb, but this can be configured to
+ * another value.
+ */
+#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
+
+#ifndef CONFIG_SMP
+struct pgtable_cache_struct quicklists;
+#endif
+
+static void __iomem *__ioremap(phys_addr_t addr, unsigned long size,
+ unsigned long flags)
+{
+ unsigned long v, i;
+ phys_addr_t p;
+ int err;
+
+ /*
+ * Choose an address to map it to.
+ * Once the vmalloc system is running, we use it.
+ * Before then, we use space going down from ioremap_base
+ * (ioremap_bot records where we're up to).
+ */
+ p = addr & PAGE_MASK;
+ size = PAGE_ALIGN(addr + size) - p;
+
+ /*
+ * Don't allow anybody to remap normal RAM that we're using.
+ * mem_init() sets high_memory so only do the check after that.
+ *
+ * However, allow remap of rootfs: TBD
+ */
+ if (mem_init_done &&
+ p >= memory_start && p < virt_to_phys(high_memory) &&
+ !(p >= virt_to_phys((unsigned long)&__bss_stop) &&
+ p < virt_to_phys((unsigned long)__bss_stop))) {
+ printk(KERN_WARNING "__ioremap(): phys addr "PTE_FMT
+ " is RAM lr %p\n", (unsigned long)p,
+ __builtin_return_address(0));
+ return NULL;
+ }
+
+ if (size == 0)
+ return NULL;
+
+ /*
+ * Is it already mapped? If the whole area is mapped then we're
+ * done, otherwise remap it since we want to keep the virt addrs for
+ * each request contiguous.
+ *
+ * We make the assumption here that if the bottom and top
+ * of the range we want are mapped then it's mapped to the
+ * same virt address (and this is contiguous).
+ * -- Cort
+ */
+
+ if (mem_init_done) {
+ struct vm_struct *area;
+ area = get_vm_area(size, VM_IOREMAP);
+ if (area == NULL)
+ return NULL;
+ v = VMALLOC_VMADDR(area->addr);
+ } else {
+ v = (ioremap_bot -= size);
+ }
+
+ if ((flags & _PAGE_PRESENT) == 0)
+ flags |= _PAGE_KERNEL;
+ if (flags & _PAGE_NO_CACHE)
+ flags |= _PAGE_GUARDED;
+
+ err = 0;
+ for (i = 0; i < size && err == 0; i += PAGE_SIZE)
+ err = map_page(v + i, p + i, flags);
+ if (err) {
+ if (mem_init_done)
+ vfree((void *)v);
+ return NULL;
+ }
+
+ return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
+}
+
+void __iomem *ioremap(phys_addr_t addr, unsigned long size)
+{
+ return __ioremap(addr, size, _PAGE_NO_CACHE);
+}
+EXPORT_SYMBOL(ioremap);
+
+void iounmap(void *addr)
+{
+ if (addr > high_memory && (unsigned long) addr < ioremap_bot)
+ vfree((void *) (PAGE_MASK & (unsigned long) addr));
+}
+EXPORT_SYMBOL(iounmap);
+
+
+int map_page(unsigned long va, phys_addr_t pa, int flags)
+{
+ pmd_t *pd;
+ pte_t *pg;
+ int err = -ENOMEM;
+ /* spin_lock(&init_mm.page_table_lock); */
+ /* Use upper 10 bits of VA to index the first level map */
+ pd = pmd_offset(pgd_offset_k(va), va);
+ /* Use middle 10 bits of VA to index the second-level map */
+ pg = pte_alloc_kernel(pd, va); /* from powerpc - pgtable.c */
+ /* pg = pte_alloc_kernel(&init_mm, pd, va); */
+
+ if (pg != NULL) {
+ err = 0;
+ set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
+ __pgprot(flags)));
+ if (mem_init_done)
+ flush_HPTE(0, va, pmd_val(*pd));
+ /* flush_HPTE(0, va, pg); */
+
+ }
+ /* spin_unlock(&init_mm.page_table_lock); */
+ return err;
+}
+
+void __init adjust_total_lowmem(void)
+{
+/* TBD */
+#if 0
+ unsigned long max_low_mem = MAX_LOW_MEM;
+
+ if (total_lowmem > max_low_mem) {
+ total_lowmem = max_low_mem;
+#ifndef CONFIG_HIGHMEM
+ printk(KERN_INFO "Warning, memory limited to %ld Mb, use "
+ "CONFIG_HIGHMEM to reach %ld Mb\n",
+ max_low_mem >> 20, total_memory >> 20);
+ total_memory = total_lowmem;
+#endif /* CONFIG_HIGHMEM */
+ }
+#endif
+}
+
+static void show_tmem(unsigned long tmem)
+{
+ volatile unsigned long a;
+ a = a + tmem;
+}
+
+/*
+ * Map in all of physical memory starting at CONFIG_KERNEL_START.
+ */
+void __init mapin_ram(void)
+{
+ unsigned long v, p, s, f;
+
+ v = CONFIG_KERNEL_START;
+ p = memory_start;
+ show_tmem(memory_size);
+ for (s = 0; s < memory_size; s += PAGE_SIZE) {
+ f = _PAGE_PRESENT | _PAGE_ACCESSED |
+ _PAGE_SHARED | _PAGE_HWEXEC;
+ if ((char *) v < _stext || (char *) v >= _etext)
+ f |= _PAGE_WRENABLE;
+ else
+ /* On the MicroBlaze, no user access
+ forces R/W kernel access */
+ f |= _PAGE_USER;
+ map_page(v, p, f);
+ v += PAGE_SIZE;
+ p += PAGE_SIZE;
+ }
+}
+
+/* is x a power of 2? */
+#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0))
+
+/*
+ * Set up a mapping for a block of I/O.
+ * virt, phys, size must all be page-aligned.
+ * This should only be called before ioremap is called.
+ */
+void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
+ unsigned int size, int flags)
+{
+ int i;
+
+ if (virt > CONFIG_KERNEL_START && virt < ioremap_bot)
+ ioremap_bot = ioremap_base = virt;
+
+ /* Put it in the page tables. */
+ for (i = 0; i < size; i += PAGE_SIZE)
+ map_page(virt + i, phys + i, flags);
+}
+
+/* Scan the real Linux page tables and return a PTE pointer for
+ * a virtual address in a context.
+ * Returns true (1) if PTE was found, zero otherwise. The pointer to
+ * the PTE pointer is unmodified if PTE is not found.
+ */
+static int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ int retval = 0;
+
+ pgd = pgd_offset(mm, addr & PAGE_MASK);
+ if (pgd) {
+ pmd = pmd_offset(pgd, addr & PAGE_MASK);
+ if (pmd_present(*pmd)) {
+ pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
+ if (pte) {
+ retval = 1;
+ *ptep = pte;
+ }
+ }
+ }
+ return retval;
+}
+
+/* Find physical address for this virtual address. Normally used by
+ * I/O functions, but anyone can call it.
+ */
+unsigned long iopa(unsigned long addr)
+{
+ unsigned long pa;
+
+ pte_t *pte;
+ struct mm_struct *mm;
+
+ /* Allow mapping of user addresses (within the thread)
+ * for DMA if necessary.
+ */
+ if (addr < TASK_SIZE)
+ mm = current->mm;
+ else
+ mm = &init_mm;
+
+ pa = 0;
+ if (get_pteptr(mm, addr, &pte))
+ pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
+
+ return pa;
+}
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index f42fa50d355..ac5e05a98b2 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -438,7 +438,7 @@ source "drivers/s390/block/Kconfig"
config XILINX_SYSACE
tristate "Xilinx SystemACE support"
- depends on 4xx
+ depends on 4xx || MICROBLAZE
help
Include support for the Xilinx SystemACE CompactFlash interface
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 02ecfd5fa61..b1e9652c0d9 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -906,7 +906,7 @@ config DTLK
config XILINX_HWICAP
tristate "Xilinx HWICAP Support"
- depends on XILINX_VIRTEX
+ depends on XILINX_VIRTEX || MICROBLAZE
help
This option enables support for Xilinx Internal Configuration
Access Port (ICAP) driver. The ICAP is used on Xilinx Virtex
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index edb02530e46..11f373971fa 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -69,7 +69,7 @@ comment "Memory mapped GPIO expanders:"
config GPIO_XILINX
bool "Xilinx GPIO support"
- depends on PPC_OF
+ depends on PPC_OF || MICROBLAZE
help
Say yes here to support the Xilinx FPGA GPIO device
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index da3c3a5d268..c4b3fbd1a80 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -192,7 +192,7 @@ config SERIO_RAW
config SERIO_XILINX_XPS_PS2
tristate "Xilinx XPS PS/2 Controller Support"
- depends on PPC
+ depends on PPC || MICROBLAZE
help
This driver supports XPS PS/2 IP from the Xilinx EDK on
PowerPC platform.
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index f821dbc952a..27f3b81333d 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -1,21 +1,21 @@
config OF_DEVICE
def_bool y
- depends on OF && (SPARC || PPC_OF)
+ depends on OF && (SPARC || PPC_OF || MICROBLAZE)
config OF_GPIO
def_bool y
- depends on OF && PPC_OF && GPIOLIB
+ depends on OF && (PPC_OF || MICROBLAZE) && GPIOLIB
help
OpenFirmware GPIO accessors
config OF_I2C
def_tristate I2C
- depends on PPC_OF && I2C
+ depends on (PPC_OF || MICROBLAZE) && I2C
help
OpenFirmware I2C accessors
config OF_SPI
def_tristate SPI
- depends on OF && PPC_OF && SPI
+ depends on OF && (PPC_OF || MICROBLAZE) && SPI
help
OpenFirmware SPI accessors
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 83a185d5296..95749477541 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -212,7 +212,7 @@ config SPI_TXX9
config SPI_XILINX
tristate "Xilinx SPI controller"
- depends on XILINX_VIRTEX && EXPERIMENTAL
+ depends on (XILINX_VIRTEX || MICROBLAZE) && EXPERIMENTAL
select SPI_BITBANG
help
This exposes the SPI controller IP from the Xilinx EDK.
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index c6c816b7ecb..5eee3f82be5 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD
default y if PCMCIA && !M32R # sl811_cs
default y if ARM # SL-811
default y if SUPERH # r8a66597-hcd
+ default y if MICROBLAZE
default PCI
# many non-PCI SOC chips embed OHCI
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0048f1185a6..74712cb8399 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1996,7 +1996,7 @@ config FB_PS3_DEFAULT_SIZE_M
config FB_XILINX
tristate "Xilinx frame buffer support"
- depends on FB && XILINX_VIRTEX
+ depends on FB && (XILINX_VIRTEX || MICROBLAZE)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT