diff options
| -rw-r--r-- | arch/sh/Kconfig | 1 | ||||
| -rw-r--r-- | arch/sh/configs/shx3_defconfig | 756 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/sh3/entry.S | 19 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/sh4/probe.c | 8 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/sh4a/Makefile | 2 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/sh4a/clock-shx3.c | 135 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/sh4a/setup-shx3.c | 85 | ||||
| -rw-r--r-- | arch/sh/kernel/setup.c | 2 | ||||
| -rw-r--r-- | arch/sh/kernel/timers/timer-tmu.c | 7 | ||||
| -rw-r--r-- | arch/sh/mm/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.c | 4 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.h | 25 | ||||
| -rw-r--r-- | include/asm-sh/bugs.h | 2 | ||||
| -rw-r--r-- | include/asm-sh/cpu-sh4/freq.h | 2 | ||||
| -rw-r--r-- | include/asm-sh/cpu-sh4/timer.h | 57 | ||||
| -rw-r--r-- | include/asm-sh/processor.h | 2 |
16 files changed, 1083 insertions, 33 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index b16407c9f2c..d82caffd1da 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -598,6 +598,7 @@ config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 depends on SMP + default "4" if CPU_SHX3 default "2" help This allows you to specify the maximum number of CPUs which this diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig new file mode 100644 index 00000000000..219bad558b1 --- /dev/null +++ b/arch/sh/configs/shx3_defconfig @@ -0,0 +1,756 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc4 +# Wed Jun 20 14:09:27 2007 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_UTS_NS is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX3=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +CONFIG_CPU_SUBTYPE_SHX3=y +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set +# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_SH_FPU is not set +# CONFIG_SH_FPU_EMU is not set +CONFIG_SH_DSP=y +CONFIG_SH_STORE_QUEUES=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_INTC2_IRQ=y +CONFIG_CPU_HAS_SR_RB=y + +# +# Board support +# + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200 ip=192.168.1.2:::255.255.255.0 root=/dev/nfs nfsroot=192.168.1.1:/exports/devel/rfs/mobiler noaliencache earlyprintk=bios ignore_loglevel" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_PATA_PLATFORM=y + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# ISDN subsystem +# + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +# CONFIG_HID is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +# CONFIG_OPROFILE is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_SLAB_LEAK=y +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +# CONFIG_PROVE_LOCKING is not set +CONFIG_LOCKDEP=y +CONFIG_DEBUG_LOCKDEP=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_SCIF_CONSOLE is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_4KSTACKS is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index b0b59d4a33c..d8e122971c3 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -340,8 +340,27 @@ ENTRY(vbr_base) general_exception: mov.l 1f, k2 mov.l 2f, k3 +#ifdef CONFIG_CPU_SUBTYPE_SHX3 + mov.l @k2, k2 + + ! Is EXPEVT larger than 0x800? + mov #0x8, k0 + shll8 k0 + cmp/hs k0, k2 + bf 0f + + ! then add 0x580 (k2 is 0xd80 or 0xda0) + mov #0x58, k0 + shll2 k0 + shll2 k0 + add k0, k2 +0: + bra handle_exception + nop +#else bra handle_exception mov.l @k2, k2 +#endif .align 2 1: .long EXPEVT 2: .long ret_from_exception diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index fab2eb07196..66c3f75647b 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -141,6 +141,14 @@ int __init detect_cpu_and_cache_system(void) current_cpu_data.flags |= CPU_HAS_LLSC; } break; + case 0x4000: /* 1st cut */ + case 0x4001: /* 2nd cut */ + current_cpu_data.type = CPU_SHX3; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + CPU_HAS_LLSC; + break; case 0x8000: current_cpu_data.type = CPU_ST40RA; current_cpu_data.flags |= CPU_HAS_FPU; diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index ab7422f8f82..40062328648 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o +obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o @@ -17,5 +18,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o +clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o obj-y += $(clock-y) diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c new file mode 100644 index 00000000000..c630b29e06a --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c @@ -0,0 +1,135 @@ +/* + * arch/sh/kernel/cpu/sh4/clock-shx3.c + * + * SH-X3 support for the clock framework + * + * Copyright (C) 2006-2007 Renesas Technology Corp. + * Copyright (C) 2006-2007 Renesas Solutions Corp. + * Copyright (C) 2006-2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int ifc_divisors[] = { 1, 2, 4 ,6 }; +static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18, 24, 32, 36, 48 }; +static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18, 24, 32, 36, 48 }; +static int cfc_divisors[] = { 1, 1, 4, 6 }; + +#define IFC_POS 28 +#define IFC_MSK 0x0003 +#define BFC_MSK 0x000f +#define PFC_MSK 0x000f +#define CFC_MSK 0x0003 +#define BFC_POS 16 +#define PFC_POS 0 +#define CFC_POS 20 + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK]; +} + +static struct clk_ops shx3_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops shx3_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK); + clk->rate = clk->parent->rate / bfc_divisors[idx]; +} + +static struct clk_ops shx3_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK); + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops shx3_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *shx3_clk_ops[] = { + &shx3_master_clk_ops, + &shx3_module_clk_ops, + &shx3_bus_clk_ops, + &shx3_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(shx3_clk_ops)) + *ops = shx3_clk_ops[idx]; +} + +static void shyway_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK); + clk->rate = clk->parent->rate / cfc_divisors[idx]; +} + +static struct clk_ops shx3_shyway_clk_ops = { + .recalc = shyway_clk_recalc, +}; + +static struct clk shx3_shyway_clk = { + .name = "shyway_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &shx3_shyway_clk_ops, +}; + +/* + * Additional SHx3-specific on-chip clocks that aren't already part of the + * clock framework + */ +static struct clk *shx3_onchip_clocks[] = { + &shx3_shyway_clk, +}; + +static int __init shx3_clk_init(void) +{ + struct clk *clk = clk_get(NULL, "master_clk"); + int i; + + for (i = 0; i < ARRAY_SIZE(shx3_onchip_clocks); i++) { + struct clk *clkp = shx3_onchip_clocks[i]; + + clkp->parent = clk; + clk_register(clkp); + clk_enable(clkp); + } + + /* + * Now that we have the rest of the clocks registered, we need to + * force the parent clock to propagate so that these clocks will + * automatically figure out their rate. We cheat by handing the + * parent clock its current rate and forcing child propagation. + */ + clk_set_rate(clk, clk_get_rate(clk)); + + clk_put(clk); + + return 0; +} +arch_initcall(shx3_clk_init); diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c new file mode 100644 index 00000000000..70683ea12b8 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -0,0 +1,85 @@ +/* + * SH-X3 Setup + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <linux/io.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffc30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, + }, { + .mapbase = 0xffc40000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 44, 45, 47, 46 }, + }, { + .mapbase = 0xffc50000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 48, 49, 51, 50 }, + }, { + .mapbase = 0xffc60000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 53, 55, 54 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *shx3_devices[] __initdata = { + &sci_device, +}; + +static int __init shx3_devices_setup(void) +{ + return platform_add_devices(shx3_devices, + ARRAY_SIZE(shx3_devices)); +} +__initcall(shx3_devices_setup); + +static struct intc2_data intc2_irq_table[] = { + { 16, 0, 0, 0, 1, 2 }, /* TMU0 */ + { 40, 4, 0, 0x20, 0, 3 }, /* SCIF0 ERI */ + { 41, 4, 0, 0x20, 1, 3 }, /* SCIF0 RXI */ + { 42, 4, 0, 0x20, 2, 3 }, /* SCIF0 BRI */ + { 43, 4, 0, 0x20, 3, 3 }, /* SCIF0 TXI */ +}; + +static struct intc2_desc intc2_irq_desc __read_mostly = { + .prio_base = 0xfe410000, + .msk_base = 0xfe410820, + .mskclr_base = 0xfe410850, + + .intc2_data = intc2_irq_table, + .nr_irqs = ARRAY_SIZE(intc2_irq_table), + + .chip = { + .name = "INTC2-SHX3", + }, +}; + +void __init init_IRQ_intc2(void) +{ + register_intc2_controller(&intc2_irq_desc); +} diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 765f83c1bca..de8e6e2f2c8 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -285,7 +285,7 @@ static const char *cpu_name[] = { [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", [CPU_SH7722] = "SH7722", - [CPU_SH_NONE] = "Unknown" + [CPU_SHX3] = "SH-X3", [CPU_SH_NONE] = "Unknown" }; const char *get_cpu_subtype(struct sh_cpuinfo *c) diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 2d997e2a5b6..097ebd49f1b 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -30,7 +30,7 @@ static int tmu_timer_start(void) { - ctrl_outb(ctrl_inb(TMU_TSTR) | 0x3, TMU_TSTR); + ctrl_outb(ctrl_inb(TMU_012_TSTR) | 0x3, TMU_012_TSTR); return 0; } @@ -52,7 +52,7 @@ static void tmu0_timer_set_interval(unsigned long interval, unsigned int reload) static int tmu_timer_stop(void) { - ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x3, TMU_TSTR); + ctrl_outb(ctrl_inb(TMU_012_TSTR) & ~0x3, TMU_012_TSTR); return 0; } @@ -174,7 +174,8 @@ static int tmu_timer_init(void) #if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \ !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ - !defined(CONFIG_CPU_SUBTYPE_SH7785) + !defined(CONFIG_CPU_SUBTYPE_SH7785) && \ + !defined(CONFIG_CPU_SUBTYPE_SHX3) ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); #endif diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 6fc5550c4ba..ea1d2716fdb 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -36,6 +36,9 @@ config CPU_SUBTYPE_ST40 config CPU_SHX2 bool +config CPU_SHX3 + bool + choice prompt "Processor sub-type selection" @@ -193,6 +196,12 @@ config CPU_SUBTYPE_SH7785 select CPU_SHX2 select CPU_HAS_INTC2_IRQ +config CPU_SUBTYPE_SHX3 + bool "Support SH-X3 processor" + select CPU_SH4A + select CPU_SHX3 + select CPU_HAS_INTC2_IRQ + # SH4AL-DSP Processor Support config CPU_SUBTYPE_SH73180 diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 1f89496d530..672cd104253 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -367,7 +367,9 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) } else { #ifdef CONFIG_CPU_SUBTYPE_SH7343 /* Nothing */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SHX3) ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */ #else ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */ diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index da643b31715..247fb66bf0f 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -78,7 +78,7 @@ # define SCPDR 0xA4050136 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ # define SCIF_ONLY -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) +#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ # define SCI_NPORTS 2 # define SCIF_ORER 0x0001 /* overrun error bit */ @@ -173,6 +173,14 @@ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SHX3) +# define SCSPTR0 0xffc30020 /* 16 bit SCIF */ +# define SCSPTR1 0xffc40020 /* 16 bit SCIF */ +# define SCSPTR2 0xffc50020 /* 16 bit SCIF */ +# define SCSPTR3 0xffc60020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* Overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCIF_ONLY #else # error CPU subtype not defined #endif @@ -189,7 +197,8 @@ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SHX3) #define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ #else #define SCI_CTRL_FLAGS_REIE 0 @@ -666,6 +675,18 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } +#elif defined(CONFIG_CPU_SUBTYPE_SHX3) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffc30000) + return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffc40000) + return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffc50000) + return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffc60000) + return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ +} #endif /* diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index efc8fd3e1fa..aeee8da9c54 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -35,7 +35,7 @@ static void __init check_bugs(void) case CPU_SH7750 ... CPU_SH4_501: *p++ = '4'; break; - case CPU_SH7770 ... CPU_SH7785: + case CPU_SH7770 ... CPU_SHX3: *p++ = '4'; *p++ = 'a'; break; diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h index 39f41fcd509..026025b51ce 100644 --- a/include/asm-sh/cpu-sh4/freq.h +++ b/include/asm-sh/cpu-sh4/freq.h @@ -22,6 +22,8 @@ #define FRQCR0 0xffc80000 #define FRQCR1 0xffc80004 #define FRQMR1 0xffc80014 +#elif defined(CONFIG_CPU_SUBTYPE_SHX3) +#define FRQCR 0xffc00014 #else #define FRQCR 0xffc00000 #define FRQCR_PSTBY 0x0200 diff --git a/include/asm-sh/cpu-sh4/timer.h b/include/asm-sh/cpu-sh4/timer.h index 8a4af126c89..d1e796b9688 100644 --- a/include/asm-sh/cpu-sh4/timer.h +++ b/include/asm-sh/cpu-sh4/timer.h @@ -1,7 +1,7 @@ /* * include/asm-sh/cpu-sh4/timer.h * - * Copyright (C) 2004 Lineo Solutions, Inc. + * Copyright (C) 2004 Lineo Solutions, Inc. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -16,36 +16,45 @@ * SH7750S/SH7750R * SH7751/SH7751R * SH7760 + * SH-X3 * --------------------------------------------------------------------------- */ - -#if !defined(CONFIG_CPU_SUBTYPE_SH7760) -#define TMU_TOCR 0xffd80000 /* Byte access */ +#ifdef CONFIG_CPU_SUBTYPE_SHX3 +#define TMU_012_BASE 0xffc10000 +#define TMU_345_BASE 0xffc20000 +#else +#define TMU_012_BASE 0xffd80000 +#define TMU_345_BASE 0xfe100000 #endif -#define TMU_TSTR 0xffd80004 /* Byte access */ -#define TMU0_TCOR 0xffd80008 /* Long access */ -#define TMU0_TCNT 0xffd8000c /* Long access */ -#define TMU0_TCR 0xffd80010 /* Word access */ +#define TMU_TOCR TMU_012_BASE /* Not supported on all CPUs */ -#define TMU1_TCOR 0xffd80014 /* Long access */ -#define TMU1_TCNT 0xffd80018 /* Long access */ -#define TMU1_TCR 0xffd8001c /* Word access */ +#define TMU_012_TSTR (TMU_012_BASE + 0x04) +#define TMU_345_TSTR (TMU_345_BASE + 0x04) -#define TMU2_TCOR 0xffd80020 /* Long access */ -#define TMU2_TCNT 0xffd80024 /* Long access */ -#define TMU2_TCR 0xffd80028 /* Word access */ -#define TMU2_TCPR 0xffd8002c /* Long access */ +#define TMU0_TCOR (TMU_012_BASE + 0x08) +#define TMU0_TCNT (TMU_012_BASE + 0x0c) +#define TMU0_TCR (TMU_012_BASE + 0x10) -#if !defined(CONFIG_CPU_SUBTYPE_SH7760) -#define TMU3_TCOR 0xfe100008 /* Long access */ -#define TMU3_TCNT 0xfe10000c /* Long access */ -#define TMU3_TCR 0xfe100010 /* Word access */ +#define TMU1_TCOR (TMU_012_BASE + 0x14) +#define TMU1_TCNT (TMU_012_BASE + 0x18) +#define TMU1_TCR (TMU_012_BASE + 0x1c) -#define TMU4_TCOR 0xfe100014 /* Long access */ -#define TMU4_TCNT 0xfe100018 /* Long access */ -#define TMU4_TCR 0xfe10001c /* Word access */ -#endif +#define TMU2_TCOR (TMU_012_BASE + 0x20) +#define TMU2_TCNT (TMU_012_BASE + 0x24) +#define TMU2_TCR (TMU_012_BASE + 0x28) +#define TMU2_TCPR (TMU_012_BASE + 0x2c) -#endif /* __ASM_CPU_SH4_TIMER_H */ +#define TMU3_TCOR (TMU_345_BASE + 0x08) +#define TMU3_TCNT (TMU_345_BASE + 0x0c) +#define TMU3_TCR (TMU_345_BASE + 0x10) +#define TMU4_TCOR (TMU_345_BASE + 0x14) +#define TMU4_TCNT (TMU_345_BASE + 0x18) +#define TMU4_TCR (TMU_345_BASE + 0x1c) + +#define TMU5_TCOR (TMU_345_BASE + 0x20) +#define TMU5_TCNT (TMU_345_BASE + 0x24) +#define TMU5_TCR (TMU_345_BASE + 0x28) + +#endif /* __ASM_CPU_SH4_TIMER_H */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index 1a20db09619..2252e75daa2 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -52,7 +52,7 @@ enum cpu_type { CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501, /* SH-4A types */ - CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, + CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3, /* SH4AL-DSP types */ CPU_SH73180, CPU_SH7343, CPU_SH7722, |