aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/Kconfig23
-rw-r--r--arch/powerpc/Kconfig.debug9
-rw-r--r--arch/powerpc/configs/cell_defconfig7
-rw-r--r--arch/powerpc/configs/mpc7448_hpc2_defconfig923
-rw-r--r--arch/powerpc/kernel/Makefile3
-rw-r--r--arch/powerpc/kernel/cpu_setup_power4.S14
-rw-r--r--arch/powerpc/kernel/cputable.c12
-rw-r--r--arch/powerpc/kernel/crash.c147
-rw-r--r--arch/powerpc/kernel/head_64.S62
-rw-r--r--arch/powerpc/kernel/iommu.c30
-rw-r--r--arch/powerpc/kernel/legacy_serial.c11
-rw-r--r--arch/powerpc/kernel/lparcfg.c147
-rw-r--r--arch/powerpc/kernel/machine_kexec_64.c4
-rw-r--r--arch/powerpc/kernel/misc.S203
-rw-r--r--arch/powerpc/kernel/misc_32.S156
-rw-r--r--arch/powerpc/kernel/misc_64.S223
-rw-r--r--arch/powerpc/kernel/paca.c1
-rw-r--r--arch/powerpc/kernel/prom.c49
-rw-r--r--arch/powerpc/kernel/rtas.c119
-rw-r--r--arch/powerpc/kernel/setup_64.c22
-rw-r--r--arch/powerpc/kernel/traps.c27
-rw-r--r--arch/powerpc/kernel/udbg.c7
-rw-r--r--arch/powerpc/mm/hash_native_64.c3
-rw-r--r--arch/powerpc/mm/hash_utils_64.c106
-rw-r--r--arch/powerpc/mm/mmu_context_64.c2
-rw-r--r--arch/powerpc/platforms/86xx/Kconfig6
-rw-r--r--arch/powerpc/platforms/86xx/Makefile3
-rw-r--r--arch/powerpc/platforms/86xx/mpc8641_hpcn.h1
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx.h8
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_hpcn.c129
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_smp.c10
-rw-r--r--arch/powerpc/platforms/86xx/pci.c137
-rw-r--r--arch/powerpc/platforms/Makefile1
-rw-r--r--arch/powerpc/platforms/cell/Kconfig2
-rw-r--r--arch/powerpc/platforms/cell/setup.c16
-rw-r--r--arch/powerpc/platforms/cell/spu_base.c8
-rw-r--r--arch/powerpc/platforms/cell/spufs/file.c10
-rw-r--r--arch/powerpc/platforms/cell/spufs/switch.c6
-rw-r--r--arch/powerpc/platforms/embedded6xx/Kconfig15
-rw-r--r--arch/powerpc/platforms/embedded6xx/Makefile4
-rw-r--r--arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c335
-rw-r--r--arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h26
-rw-r--r--arch/powerpc/platforms/iseries/dt.c2
-rw-r--r--arch/powerpc/platforms/iseries/htab.c4
-rw-r--r--arch/powerpc/platforms/iseries/lpevents.c55
-rw-r--r--arch/powerpc/platforms/iseries/proc.c1
-rw-r--r--arch/powerpc/platforms/iseries/setup.c19
-rw-r--r--arch/powerpc/platforms/maple/setup.c7
-rw-r--r--arch/powerpc/platforms/powermac/setup.c9
-rw-r--r--arch/powerpc/platforms/pseries/iommu.c33
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c4
-rw-r--r--arch/powerpc/platforms/pseries/setup.c10
-rw-r--r--arch/powerpc/sysdev/Makefile2
-rw-r--r--arch/powerpc/sysdev/dart.h6
-rw-r--r--arch/powerpc/sysdev/dart_iommu.c49
-rw-r--r--arch/powerpc/sysdev/todc.c392
-rw-r--r--arch/powerpc/sysdev/tsi108_dev.c145
-rw-r--r--arch/powerpc/sysdev/tsi108_pci.c412
-rw-r--r--drivers/ide/Kconfig9
-rw-r--r--drivers/ide/ppc/pmac.c125
-rw-r--r--drivers/macintosh/Kconfig12
-rw-r--r--drivers/macintosh/Makefile1
-rw-r--r--drivers/macintosh/via-pmu-led.c144
-rw-r--r--include/asm-powerpc/cputable.h48
-rw-r--r--include/asm-powerpc/iseries/it_lp_queue.h40
-rw-r--r--include/asm-powerpc/kdump.h2
-rw-r--r--include/asm-powerpc/kexec.h9
-rw-r--r--include/asm-powerpc/machdep.h2
-rw-r--r--include/asm-powerpc/mmu.h1
-rw-r--r--include/asm-powerpc/mmu_context.h7
-rw-r--r--include/asm-powerpc/mpc86xx.h5
-rw-r--r--include/asm-powerpc/rtas.h3
-rw-r--r--include/asm-powerpc/time.h6
-rw-r--r--include/asm-powerpc/todc.h487
-rw-r--r--include/asm-powerpc/tsi108.h109
-rw-r--r--include/asm-powerpc/udbg.h3
-rw-r--r--kernel/kexec.c6
77 files changed, 4086 insertions, 1110 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d43e4521abf..b9a40a35a9e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -340,7 +340,7 @@ config PPC_ISERIES
config EMBEDDED6xx
bool "Embedded 6xx/7xx/7xxx-based board"
- depends on PPC32 && BROKEN
+ depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
config APUS
bool "Amiga-APUS"
@@ -417,12 +417,17 @@ config PPC_CELL_NATIVE
default n
config PPC_IBM_CELL_BLADE
- bool " IBM Cell Blade"
+ bool "IBM Cell Blade"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_CELL_NATIVE
select PPC_RTAS
select MMIO_NVRAM
select PPC_UDBG_16550
+ select UDBG_RTAS_CONSOLE
+
+config UDBG_RTAS_CONSOLE
+ bool
+ default n
config XICS
depends on PPC_PSERIES
@@ -435,7 +440,8 @@ config U3_DART
default n
config MPIC
- depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP
+ depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP \
+ || MPC7448HPC2
bool
default y
@@ -561,6 +567,13 @@ config TAU_AVERAGE
/proc/cpuinfo.
If in doubt, say N here.
+
+config PPC_TODC
+ depends on EMBEDDED6xx
+ bool "Generic Time-of-day Clock (TODC) support"
+ ---help---
+ This adds support for many TODC/RTC chips.
+
endmenu
source arch/powerpc/platforms/embedded6xx/Kconfig
@@ -801,7 +814,6 @@ config GENERIC_ISA_DMA
config PPC_I8259
bool
- default y if MPC8641_HPCN
default n
config PPC_INDIRECT_PCI
@@ -824,7 +836,8 @@ config MCA
bool
config PCI
- bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
+ bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \
+ || MPC7448HPC2
default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
default PCI_QSPAN if !4xx && !CPM2 && 8xx
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index c69006ae824..e29ef77d3b0 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -134,12 +134,19 @@ config PPC_EARLY_DEBUG_G5
help
Select this to enable early debugging for Apple G5 machines.
-config PPC_EARLY_DEBUG_RTAS
+config PPC_EARLY_DEBUG_RTAS_PANEL
bool "RTAS Panel"
depends on PPC_RTAS
help
Select this to enable early debugging via the RTAS panel.
+config PPC_EARLY_DEBUG_RTAS_CONSOLE
+ bool "RTAS Console"
+ depends on PPC_RTAS
+ select UDBG_RTAS_CONSOLE
+ help
+ Select this to enable early debugging via the RTAS console.
+
config PPC_EARLY_DEBUG_MAPLE
bool "Maple real mode"
depends on PPC_MAPLE
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index b8b8d4675dc..e028a2ecb8a 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Mon Jun 19 17:23:03 2006
+# Linux kernel version: 2.6.17-rc6
+# Thu Jun 22 15:28:36 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@@ -1063,7 +1063,8 @@ CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUGGER=y
-# CONFIG_XMON is not set
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
CONFIG_IRQSTACKS=y
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
new file mode 100644
index 00000000000..15a50f4ceb1
--- /dev/null
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -0,0 +1,923 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17-rc4
+# Sat May 27 18:45:55 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_ISERIES is not set
+CONFIG_EMBEDDED6xx=y
+# CONFIG_APUS is not set
+CONFIG_MPIC=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_KATANA is not set
+# CONFIG_WILLOW is not set
+# CONFIG_CPCI690 is not set
+# CONFIG_POWERPMC250 is not set
+# CONFIG_CHESTNUT is not set
+# CONFIG_SPRUCE is not set
+# CONFIG_HDPU is not set
+# CONFIG_EV64260 is not set
+# CONFIG_LOPEC is not set
+# CONFIG_MVME5100 is not set
+# CONFIG_PPLUS is not set
+# CONFIG_PRPMC750 is not set
+# CONFIG_PRPMC800 is not set
+# CONFIG_SANDPOINT is not set
+CONFIG_MPC7448HPC2=y
+# CONFIG_RADSTONE_PPC7D is not set
+# CONFIG_PAL4 is not set
+# CONFIG_GEMINI is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBC82xx is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX8260 is not set
+# CONFIG_TQM8260 is not set
+# CONFIG_ADS8272 is not set
+# CONFIG_PQ2FADS is not set
+# CONFIG_LITE5200 is not set
+# CONFIG_EV64360 is not set
+CONFIG_TSI108_BRIDGE=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_INDIRECT_PCI is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+CONFIG_SCSI_SATA_MV=y
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_TSI108_ETH=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 803858e8616..814f242aeb8 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -50,7 +50,8 @@ extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
extra-$(CONFIG_8xx) := head_8xx.o
extra-y += vmlinux.lds
-obj-y += time.o prom.o traps.o setup-common.o udbg.o
+obj-y += time.o prom.o traps.o setup-common.o \
+ udbg.o misc.o
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o
obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o
obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
diff --git a/arch/powerpc/kernel/cpu_setup_power4.S b/arch/powerpc/kernel/cpu_setup_power4.S
index 271418308d5..1fc86326100 100644
--- a/arch/powerpc/kernel/cpu_setup_power4.S
+++ b/arch/powerpc/kernel/cpu_setup_power4.S
@@ -125,7 +125,12 @@ _GLOBAL(__save_cpu_setup)
cmpwi r0,0x44
bne 2f
-1: /* Save HID0,1,4 and 5 */
+1: /* skip if not running in HV mode */
+ mfmsr r0
+ rldicl. r0,r0,4,63
+ beq 2f
+
+ /* Save HID0,1,4 and 5 */
mfspr r3,SPRN_HID0
std r3,CS_HID0(r5)
mfspr r3,SPRN_HID1
@@ -159,7 +164,12 @@ _GLOBAL(__restore_cpu_setup)
cmpwi r0,0x44
bnelr
-1: /* Before accessing memory, we make sure rm_ci is clear */
+1: /* skip if not running in HV mode */
+ mfmsr r0
+ rldicl. r0,r0,4,63
+ beqlr
+
+ /* Before accessing memory, we make sure rm_ci is clear */
li r0,0
mfspr r3,SPRN_HID4
rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 1c114880dc0..abf7d42a8b0 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -722,18 +722,6 @@ struct cpu_spec cpu_specs[] = {
.oprofile_type = PPC_OPROFILE_G4,
.platform = "ppc7450",
},
- { /* 8641 */
- .pvr_mask = 0xffffffff,
- .pvr_value = 0x80040010,
- .cpu_name = "8641",
- .cpu_features = CPU_FTRS_7447A,
- .cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .num_pmcs = 6,
- .cpu_setup = __setup_cpu_745x
- },
-
{ /* 82xx (8240, 8245, 8260 are all 603e cores) */
.pvr_mask = 0x7fff0000,
.pvr_value = 0x00810000,
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 22ceba844bf..358cecdc6ae 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -24,9 +24,11 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/types.h>
+#include <linux/irq.h>
#include <asm/processor.h>
#include <asm/machdep.h>
+#include <asm/kexec.h>
#include <asm/kdump.h>
#include <asm/lmb.h>
#include <asm/firmware.h>
@@ -41,6 +43,7 @@
/* This keeps a track of which one is crashing cpu. */
int crashing_cpu = -1;
+static cpumask_t cpus_in_crash = CPU_MASK_NONE;
static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data,
size_t data_len)
@@ -98,34 +101,66 @@ static void crash_save_this_cpu(struct pt_regs *regs, int cpu)
}
#ifdef CONFIG_SMP
-static atomic_t waiting_for_crash_ipi;
+static atomic_t enter_on_soft_reset = ATOMIC_INIT(0);
void crash_ipi_callback(struct pt_regs *regs)
{
int cpu = smp_processor_id();
- if (cpu == crashing_cpu)
- return;
-
if (!cpu_online(cpu))
return;
- if (ppc_md.kexec_cpu_down)
- ppc_md.kexec_cpu_down(1, 1);
-
local_irq_disable();
+ if (!cpu_isset(cpu, cpus_in_crash))
+ crash_save_this_cpu(regs, cpu);
+ cpu_set(cpu, cpus_in_crash);
- crash_save_this_cpu(regs, cpu);
- atomic_dec(&waiting_for_crash_ipi);
+ /*
+ * Entered via soft-reset - could be the kdump
+ * process is invoked using soft-reset or user activated
+ * it if some CPU did not respond to an IPI.
+ * For soft-reset, the secondary CPU can enter this func
+ * twice. 1 - using IPI, and 2. soft-reset.
+ * Tell the kexec CPU that entered via soft-reset and ready
+ * to go down.
+ */
+ if (cpu_isset(cpu, cpus_in_sr)) {
+ cpu_clear(cpu, cpus_in_sr);
+ atomic_inc(&enter_on_soft_reset);
+ }
+
+ /*
+ * Starting the kdump boot.
+ * This barrier is needed to make sure that all CPUs are stopped.
+ * If not, soft-reset will be invoked to bring other CPUs.
+ */
+ while (!cpu_isset(crashing_cpu, cpus_in_crash))
+ cpu_relax();
+
+ if (ppc_md.kexec_cpu_down)
+ ppc_md.kexec_cpu_down(1, 1);
kexec_smp_wait();
/* NOTREACHED */
}
-static void crash_kexec_prepare_cpus(void)
+/*
+ * Wait until all CPUs are entered via soft-reset.
+ */
+static void crash_soft_reset_check(int cpu)
+{
+ unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
+
+ cpu_clear(cpu, cpus_in_sr);
+ while (atomic_read(&enter_on_soft_reset) != ncpus)
+ cpu_relax();
+}
+
+
+static void crash_kexec_prepare_cpus(int cpu)
{
unsigned int msecs;
- atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
+ unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
crash_send_ipi(crash_ipi_callback);
smp_wmb();
@@ -133,14 +168,13 @@ static void crash_kexec_prepare_cpus(void)
/*
* FIXME: Until we will have the way to stop other CPUSs reliabally,
* the crash CPU will send an IPI and wait for other CPUs to
- * respond. If not, proceed the kexec boot even though we failed to
- * capture other CPU states.
+ * respond.
* Delay of at least 10 seconds.
*/
- printk(KERN_ALERT "Sending IPI to other cpus...\n");
+ printk(KERN_EMERG "Sending IPI to other cpus...\n");
msecs = 10000;
- while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) {
- barrier();
+ while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) {
+ cpu_relax();
mdelay(1);
}
@@ -149,18 +183,71 @@ static void crash_kexec_prepare_cpus(void)
/*
* FIXME: In case if we do not get all CPUs, one possibility: ask the
* user to do soft reset such that we get all.
- * IPI handler is already set by the panic cpu initially. Therefore,
- * all cpus could invoke this handler from die() and the panic CPU
- * will call machine_kexec() directly from this handler to do
- * kexec boot.
+ * Soft-reset will be used until better mechanism is implemented.
+ */
+ if (cpus_weight(cpus_in_crash) < ncpus) {
+ printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n",
+ ncpus - cpus_weight(cpus_in_crash));
+ printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n");
+ cpus_in_sr = CPU_MASK_NONE;
+ atomic_set(&enter_on_soft_reset, 0);
+ while (cpus_weight(cpus_in_crash) < ncpus)
+ cpu_relax();
+ }
+ /*
+ * Make sure all CPUs are entered via soft-reset if the kdump is
+ * invoked using soft-reset.
*/
- if (atomic_read(&waiting_for_crash_ipi))
- printk(KERN_ALERT "done waiting: %d cpus not responding\n",
- atomic_read(&waiting_for_crash_ipi));
+ if (cpu_isset(cpu, cpus_in_sr))
+ crash_soft_reset_check(cpu);
/* Leave the IPI callback set */
}
+
+/*
+ * This function will be called by secondary cpus or by kexec cpu
+ * if soft-reset is activated to stop some CPUs.
+ */
+void crash_kexec_secondary(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+ unsigned long flags;
+ int msecs = 5;
+
+ local_irq_save(flags);
+ /* Wait 5ms if the kexec CPU is not entered yet. */
+ while (crashing_cpu < 0) {
+ if (--msecs < 0) {
+ /*
+ * Either kdump image is not loaded or
+ * kdump process is not started - Probably xmon
+ * exited using 'x'(exit and recover) or
+ * kexec_should_crash() failed for all running tasks.
+ */
+ cpu_clear(cpu, cpus_in_sr);
+ local_irq_restore(flags);
+ return;
+ }
+ mdelay(1);
+ cpu_relax();
+ }
+ if (cpu == crashing_cpu) {
+ /*
+ * Panic CPU will enter this func only via soft-reset.
+ * Wait until all secondary CPUs entered and
+ * then start kexec boot.
+ */
+ crash_soft_reset_check(cpu);
+ cpu_set(crashing_cpu, cpus_in_crash);
+ if (ppc_md.kexec_cpu_down)
+ ppc_md.kexec_cpu_down(1, 0);
+ machine_kexec(kexec_crash_image);
+ /* NOTREACHED */
+ }
+ crash_ipi_callback(regs);
+}
+
#else
-static void crash_kexec_prepare_cpus(void)
+static void crash_kexec_prepare_cpus(int cpu)
{
/*
* move the secondarys to us so that we can copy
@@ -171,6 +258,10 @@ static void crash_kexec_prepare_cpus(void)
smp_release_cpus();
}
+void crash_kexec_secondary(struct pt_regs *regs)
+{
+ cpus_in_sr = CPU_MASK_NONE;
+}
#endif
void default_machine_crash_shutdown(struct pt_regs *regs)
@@ -199,14 +290,14 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
desc->chip->disable(irq);
}
- if (ppc_md.kexec_cpu_down)
- ppc_md.kexec_cpu_down(1, 0);
-
/*
* Make a note of crashing cpu. Will be used in machine_kexec
* such that another IPI will not be sent.
*/
crashing_cpu = smp_processor_id();
- crash_kexec_prepare_cpus();
crash_save_this_cpu(regs, crashing_cpu);
+ crash_kexec_prepare_cpus(crashing_cpu);
+ cpu_set(crashing_cpu, cpus_in_crash);
+ if (ppc_md.kexec_cpu_down)
+ ppc_md.kexec_cpu_down(1, 0);
}
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 831acbdf259..8cfd040d1f5 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -85,34 +85,6 @@ END_FTR_SECTION(0, 1)
/* Catch branch to 0 in real mode */
trap
-#ifdef CONFIG_PPC_ISERIES
- /*
- * At offset 0x20, there is a pointer to iSeries LPAR data.
- * This is required by the hypervisor
- */
- . = 0x20
- .llong hvReleaseData-KERNELBASE
-
- /*
- * At offset 0x28 and 0x30 are offsets to the mschunks_map
- * array (used by the iSeries LPAR debugger to do translation
- * between physical addresses and absolute addresses) and
- * to the pidhash table (also used by the debugger)
- */
- .llong mschunks_map-KERNELBASE
- .llong 0 /* pidhash-KERNELBASE SFRXXX */
-
- /* Offset 0x38 - Pointer to start of embedded System.map */
- .globl embedded_sysmap_start
-embedded_sysmap_start:
- .llong 0
- /* Offset 0x40 - Pointer to end of embedded System.map */
- .globl embedded_sysmap_end
-embedded_sysmap_end:
- .llong 0
-
-#endif /* CONFIG_PPC_ISERIES */
-
/* Secondary processors spin on this value until it goes to 1. */
.globl __secondary_hold_spinloop
__secondary_hold_spinloop:
@@ -124,6 +96,15 @@ __secondary_hold_spinloop:
__secondary_hold_acknowledge:
.llong 0x0
+#ifdef CONFIG_PPC_ISERIES
+ /*
+ * At offset 0x20, there is a pointer to iSeries LPAR data.
+ * This is required by the hypervisor
+ */
+ . = 0x20
+ .llong hvReleaseData-KERNELBASE
+#endif /* CONFIG_PPC_ISERIES */
+
. = 0x60
/*
* The following code is used on pSeries to hold secondary processors
@@ -1602,9 +1583,6 @@ _GLOBAL(__start_initialization_multiplatform)
/* Setup some critical 970 SPRs before switching MMU off */
bl .__970_cpu_preinit
- /* cpu # */
- li r24,0
-
/* Switch off MMU if not already */
LOAD_REG_IMMEDIATE(r4, .__after_prom_start - KERNELBASE)
add r4,r4,r30
@@ -1683,6 +1661,9 @@ _STATIC(__after_prom_start)
/* i.e. where we are running */
/* the source addr */
+ cmpdi r4,0 /* In some cases the loader may */
+ beq .start_here_multiplatform /* have already put us at zero */
+ /* so we can skip the copy. */
LOAD_REG_IMMEDIATE(r5,copy_to_here) /* # bytes of memory to copy */
sub r5,r5,r27
@@ -1962,14 +1943,6 @@ _STATIC(start_here_common)
li r3,0
bl .do_cpu_ftr_fixups
- LOAD_REG_IMMEDIATE(r26, boot_cpuid)
- lwz r26,0(r26)
-
- LOAD_REG_IMMEDIATE(r24, paca) /* Get base vaddr of paca array */
- mulli r13,r26,PACA_SIZE /* Calculate vaddr of right paca */
- add r13,r13,r24 /* for this processor. */
- mtspr SPRN_SPRG3,r13
-
/* ptr to current */
LOAD_REG_IMMEDIATE(r4, init_task)
std r4,PACACURRENT(r13)
@@ -1995,17 +1968,6 @@ _STATIC(start_here_common)
/* Not reached */
BUG_OPCODE
-/* Put the paca pointer into r13 and SPRG3 */
-_GLOBAL(setup_boot_paca)
- LOAD_REG_IMMEDIATE(r3, boot_cpuid)
- lwz r3,0(r3)
- LOAD_REG_IMMEDIATE(r4, paca) /* Get base vaddr of paca array */
- mulli r3,r3,PACA_SIZE /* Calculate vaddr of right paca */
- add r13,r3,r4 /* for this processor. */
- mtspr SPRN_SPRG3,r13
-
- blr
-
/*
* We put a few things here that have to be page-aligned.
* This stuff goes at the beginning of the bss, which is page-aligned.
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 7cb77c20fc5..3d677ac9965 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -38,6 +38,7 @@
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
+#include <asm/kdump.h>
#define DBG(...)
@@ -440,8 +441,37 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
tbl->it_largehint = tbl->it_halfpoint;
spin_lock_init(&tbl->it_lock);
+#ifdef CONFIG_CRASH_DUMP
+ if (ppc_md.tce_get) {
+ unsigned long index, tceval;
+ unsigned long tcecount = 0;
+
+ /*
+ * Reserve the existing mappings left by the first kernel.
+ */
+ for (index = 0; index < tbl->it_size; index++) {
+ tceval = ppc_md.tce_get(tbl, index + tbl->it_offset);
+ /*
+ * Freed TCE entry contains 0x7fffffffffffffff on JS20
+ */
+ if (tceval && (tceval != 0x7fffffffffffffffUL)) {
+ __set_bit(index, tbl->it_map);
+ tcecount++;
+ }
+ }
+ if ((tbl->it_size - tcecount) < KDUMP_MIN_TCE_ENTRIES) {
+ printk(KERN_WARNING "TCE table is full; ");
+ printk(KERN_WARNING "freeing %d entries for the kdump boot\n",
+ KDUMP_MIN_TCE_ENTRIES);
+ for (index = tbl->it_size - KDUMP_MIN_TCE_ENTRIES;
+ index < tbl->it_size; index++)
+ __clear_bit(index, tbl->it_map);
+ }
+ }
+#else
/* Clear the hardware table in case firmware left allocations in it */
ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size);
+#endif
if (!welcomed) {
printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n",
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 6e67b5b49ba..3a9b78d0354 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -302,6 +302,17 @@ void __init find_legacy_serial_ports(void)
of_node_put(isa);
}
+ /* First fill our array with tsi-bridge ports */
+ for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) {
+ struct device_node *tsi = of_get_parent(np);
+ if (tsi && !strcmp(tsi->type, "tsi-bridge")) {
+ index = add_legacy_soc_port(np, np);
+ if (index >= 0 && np == stdout)
+ legacy_serial_console = index;
+ }
+ of_node_put(tsi);
+ }
+
#ifdef CONFIG_PCI
/* Next, try to locate PCI ports */
for (np = NULL; (np = of_find_all_nodes(np));) {
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index c02deaab26c..73edc3c1613 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -45,11 +45,9 @@
static struct proc_dir_entry *proc_ppc64_lparcfg;
#define LPARCFG_BUFF_SIZE 4096
-#ifdef CONFIG_PPC_ISERIES
-
/*
- * For iSeries legacy systems, the PPA purr function is available from the
- * emulated_time_base field in the paca.
+ * Track sum of all purrs across all processors. This is used to further
+ * calculate usage values by different applications
*/
static unsigned long get_purr(void)
{
@@ -57,48 +55,31 @@ static unsigned long get_purr(void)
int cpu;
for_each_possible_cpu(cpu) {
- sum_purr += lppaca[cpu].emulated_time_base;
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ sum_purr += lppaca[cpu].emulated_time_base;
+ else {
+ struct cpu_usage *cu;
-#ifdef PURR_DEBUG
- printk(KERN_INFO "get_purr for cpu (%d) has value (%ld) \n",
- cpu, lppaca[cpu].emulated_time_base);
-#endif
+ cu = &per_cpu(cpu_usage_array, cpu);
+ sum_purr += cu->current_tb;
+ }
}
return sum_purr;
}
-#define lparcfg_write NULL
+#ifdef CONFIG_PPC_ISERIES
/*
* Methods used to fetch LPAR data when running on an iSeries platform.
*/
-static int lparcfg_data(struct seq_file *m, void *v)
+static int iseries_lparcfg_data(struct seq_file *m, void *v)
{
- unsigned long pool_id, lp_index;
+ unsigned long pool_id;
int shared, entitled_capacity, max_entitled_capacity;
int processors, max_processors;
unsigned long purr = get_purr();
- seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS);
-
shared = (int)(get_lppaca()->shared_proc);
- seq_printf(m, "serial_number=%c%c%c%c%c%c%c\n",
- e2a(xItExtVpdPanel.mfgID[2]),
- e2a(xItExtVpdPanel.mfgID[3]),
- e2a(xItExtVpdPanel.systemSerial[1]),
- e2a(xItExtVpdPanel.systemSerial[2]),
- e2a(xItExtVpdPanel.systemSerial[3]),
- e2a(xItExtVpdPanel.systemSerial[4]),
- e2a(xItExtVpdPanel.systemSerial[5]));
-
- seq_printf(m, "system_type=%c%c%c%c\n",
- e2a(xItExtVpdPanel.machineType[0]),
- e2a(xItExtVpdPanel.machineType[1]),
- e2a(xItExtVpdPanel.machineType[2]),
- e2a(xItExtVpdPanel.machineType[3]));
-
- lp_index = HvLpConfig_getLpIndex();
- seq_printf(m, "partition_id=%d\n", (int)lp_index);
seq_printf(m, "system_active_processors=%d\n",
(int)HvLpConfig_getSystemPhysicalProcessors());
@@ -137,6 +118,14 @@ static int lparcfg_data(struct seq_file *m, void *v)
return 0;
}
+
+#else /* CONFIG_PPC_ISERIES */
+
+static int iseries_lparcfg_data(struct seq_file *m, void *v)
+{
+ return 0;
+}
+
#endif /* CONFIG_PPC_ISERIES */
#ifdef CONFIG_PPC_PSERIES
@@ -213,22 +202,6 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
log_plpar_hcall_return(rc, "H_PIC");
}
-/* Track sum of all purrs across all processors. This is used to further */
-/* calculate usage values by different applications */
-
-static unsigned long get_purr(void)
-{
- unsigned long sum_purr = 0;
- int cpu;
- struct cpu_usage *cu;
-
- for_each_possible_cpu(cpu) {
- cu = &per_cpu(cpu_usage_array, cpu);
- sum_purr += cu->current_tb;
- }
- return sum_purr;
-}
-
#define SPLPAR_CHARACTERISTICS_TOKEN 20
#define SPLPAR_MAXLENGTH 1026*(sizeof(char))
@@ -333,35 +306,13 @@ static int lparcfg_count_active_processors(void)
return count;
}
-static int lparcfg_data(struct seq_file *m, void *v)
+static int pseries_lparcfg_data(struct seq_file *m, void *v)
{
int partition_potential_processors;
int partition_active_processors;
- struct device_node *rootdn;
- const char *model = "";
- const char *system_id = "";
- unsigned int *lp_index_ptr, lp_index = 0;
struct device_node *rtas_node;
int *lrdrp = NULL;
- rootdn = find_path_device("/");
- if (rootdn) {
- model = get_property(rootdn, "model", NULL);
- system_id = get_property(rootdn, "system-id", NULL);
- lp_index_ptr = (unsigned int *)
- get_property(rootdn, "ibm,partition-no", NULL);
- if (lp_index_ptr)
- lp_index = *lp_index_ptr;
- }
-
- seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS);
-
- seq_printf(m, "serial_number=%s\n", system_id);
-
- seq_printf(m, "system_type=%s\n", model);
-
- seq_printf(m, "partition_id=%d\n", (int)lp_index);
-
rtas_node = find_path_device("/rtas");
if (rtas_node)
lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity",
@@ -549,8 +500,61 @@ out:
return retval;
}
+#else /* CONFIG_PPC_PSERIES */
+
+static int pseries_lparcfg_data(struct seq_file *m, void *v)
+{
+ return 0;
+}
+
+static ssize_t lparcfg_write(struct file *file, const char __user * buf,
+ size_t count, loff_t * off)
+{
+ return count;
+}
+
#endif /* CONFIG_PPC_PSERIES */
+static int lparcfg_data(struct seq_file *m, void *v)
+{
+ struct device_node *rootdn;
+ const char *model = "";
+ const char *system_id = "";
+ const char *tmp;
+ unsigned int *lp_index_ptr, lp_index = 0;
+
+ seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS);
+
+ rootdn = find_path_device("/");
+ if (rootdn) {
+ tmp = get_property(rootdn, "model", NULL);
+ if (tmp) {
+ model = tmp;
+ /* Skip "IBM," - see platforms/iseries/dt.c */
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ model += 4;
+ }
+ tmp = get_property(rootdn, "system-id", NULL);
+ if (tmp) {
+ system_id = tmp;
+ /* Skip "IBM," - see platforms/iseries/dt.c */
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ system_id += 4;
+ }
+ lp_index_ptr = (unsigned int *)
+ get_property(rootdn, "ibm,partition-no", NULL);
+ if (lp_index_ptr)
+ lp_index = *lp_index_ptr;
+ }
+ seq_printf(m, "serial_number=%s\n", system_id);
+ seq_printf(m, "system_type=%s\n", model);
+ seq_printf(m, "partition_id=%d\n", (int)lp_index);
+
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ return iseries_lparcfg_data(m, v);
+ return pseries_lparcfg_data(m, v);
+}
+
static int lparcfg_open(struct inode *inode, struct file *file)
{
return single_open(file, lparcfg_data, NULL);
@@ -569,7 +573,8 @@ int __init lparcfg_init(void)
mode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
/* Allow writing if we have FW_FEATURE_SPLPAR */
- if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
+ if (firmware_has_feature(FW_FEATURE_SPLPAR) &&
+ !firmware_has_feature(FW_FEATURE_ISERIES)) {
lparcfg_fops.write = lparcfg_write;
mode |= S_IWUSR;
}
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index a8fa04ef27c..b438d45a068 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -378,11 +378,13 @@ static void __init export_crashk_values(void)
of_node_put(node);
}
-void __init kexec_setup(void)
+static int __init kexec_setup(void)
{
export_htab_values();
export_crashk_values();
+ return 0;
}
+__initcall(kexec_setup);
static int __init early_parse_crashk(char *p)
{
diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S
new file mode 100644
index 00000000000..fc23040d5a2
--- /dev/null
+++ b/arch/powerpc/kernel/misc.S
@@ -0,0 +1,203 @@
+/*
+ * This file contains miscellaneous low-level functions.
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras.
+ *
+ * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
+ * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/ppc_asm.h>
+
+ .text
+
+#ifdef CONFIG_PPC64
+#define IN_SYNC twi 0,r5,0; isync
+#define EIEIO_32
+#define SYNC_64 sync
+#else /* CONFIG_PPC32 */
+#define IN_SYNC
+#define EIEIO_32 eieio
+#define SYNC_64
+#endif
+/*
+ * Returns (address we are running at) - (address we were linked at)
+ * for use before the text and data are mapped to KERNELBASE.
+ */
+
+_GLOBAL(reloc_offset)
+ mflr r0
+ bl 1f
+1: mflr r3
+ LOAD_REG_IMMEDIATE(r4,1b)
+ subf r3,r4,r3
+ mtlr r0
+ blr
+
+/*
+ * add_reloc_offset(x) returns x + reloc_offset().
+ */
+_GLOBAL(add_reloc_offset)
+ mflr r0
+ bl 1f
+1: mflr r5
+ LOAD_REG_IMMEDIATE(r4,1b)
+ subf r5,r4,r5
+ add r3,r3,r5
+ mtlr r0
+ blr
+
+/*
+ * I/O string operations
+ *
+ * insb(port, buf, len)
+ * outsb(port, buf, len)
+ * insw(port, buf, len)
+ * outsw(port, buf, len)
+ * insl(port, buf, len)
+ * outsl(port, buf, len)
+ * insw_ns(port, buf, len)
+ * outsw_ns(port, buf, len)
+ * insl_ns(port, buf, len)
+ * outsl_ns(port, buf, len)
+ *
+ * The *_ns versions don't do byte-swapping.
+ */
+_GLOBAL(_insb)
+ cmpwi 0,r5,0
+ mtctr r5
+ subi r4,r4,1
+ blelr-
+00: lbz r5,0(r3)
+ eieio
+ stbu r5,1(r4)
+ bdnz 00b
+ IN_SYNC
+ blr
+
+_GLOBAL(_outsb)
+ cmpwi 0,r5,0
+ mtctr r5
+ subi r4,r4,1
+ blelr-
+00: lbzu r5,1(r4)
+ stb r5,0(r3)
+ EIEIO_32
+ bdnz 00b
+ SYNC_64
+ blr
+
+_GLOBAL(_insw)
+ cmpwi 0,r5,0
+ mtctr r5
+ subi r4,r4,2
+ blelr-
+00: lhbrx r5,0,r3
+ eieio
+ sthu r5,2(r4)
+ bdnz 00b
+ IN_SYNC
+ blr
+
+_GLOBAL(_outsw)
+ cmpwi 0,r5,0
+ mtctr r5
+ subi r4,r4,2
+ blelr-
+00: lhzu r5,2(r4)
+ EIEIO_32
+ sthbrx r5,0,r3
+ bdnz 00b
+ SYNC_64
+ blr
+
+_GLOBAL(_insl)
+ cmpwi 0,r5,0
+ mtctr r5
+ subi r4,r4,4
+ blelr-
+00: lwbrx r5,0,r3
+ eieio
+ stwu r5,4(r4)
+ bdnz 00b
+ IN_SYNC
+ blr
+
+_GLOBAL(_outsl)
+ cmpwi 0,r5,0
+ mtctr r5
+ subi r4,r4,4
+ blelr-
+00: lwzu r5,4(r4)
+ stwbrx r5,0,r3
+ EIEIO_32
+ bdnz 00b
+ SYNC_64
+ blr
+
+#ifdef CONFIG_PPC32
+_GLOBAL(__ide_mm_insw)
+#endif
+_GLOBAL(_insw_ns)
+ cmpwi 0,r5,0
+ mtctr r5
+ subi r4,r4,2
+ blelr-
+00: lhz r5,0(r3)
+ eieio
+ sthu r5,2(r4)
+ bdnz 00b
+ IN_SYNC
+ blr
+
+#ifdef CONFIG_PPC32
+_GLOBAL(__ide_mm_outsw)
+#endif
+_GLOBAL(_outsw_ns)
+ cmpwi 0,r5,0
+ mtctr r5
+ subi r4,r4,2
+ blelr-
+00: lhzu r5,2(r4)
+ sth r5,0(r3)
+ EIEIO_32
+ bdnz 00b
+ SYNC_64
+ blr
+
+#ifdef CONFIG_PPC32
+_GLOBAL(__ide_mm_insl)
+#endif
+_GLOBAL(_insl_ns)
+ cmpwi 0,r5,0
+ mtctr r5
+ subi r4,r4,4
+ blelr-
+00: lwz r5,0(r3)
+ eieio
+ stwu r5,4(r4)
+ bdnz 00b
+ IN_SYNC
+ blr
+
+#ifdef CONFIG_PPC32
+_GLOBAL(__ide_mm_outsl)
+#endif
+_GLOBAL(_outsl_ns)
+ cmpwi 0,r5,0
+ mtctr r5
+ subi r4,r4,4
+ blelr-
+00: lwzu r5,4(r4)
+ stw r5,0(r3)
+ EIEIO_32
+ bdnz 00b
+ SYNC_64
+ blr
+
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 01d3916c4cb..c74774e2175 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -61,32 +61,6 @@ _GLOBAL(mulhdu)
blr
/*
- * Returns (address we're running at) - (address we were linked at)
- * for use before the text and data are mapped to KERNELBASE.
- */
-_GLOBAL(reloc_offset)
- mflr r0
- bl 1f
-1: mflr r3
- LOAD_REG_IMMEDIATE(r4,1b)
- subf r3,r4,r3
- mtlr r0
- blr
-
-/*
- * add_reloc_offset(x) returns x + reloc_offset().
- */
-_GLOBAL(add_reloc_offset)
- mflr r0
- bl 1f
-1: mflr r5
- LOAD_REG_IMMEDIATE(r4,1b)
- subf r5,r4,r5
- add r3,r3,r5
- mtlr r0
- blr
-
-/*
* sub_reloc_offset(x) returns x - reloc_offset().
*/
_GLOBAL(sub_reloc_offset)
@@ -781,136 +755,6 @@ _GLOBAL(atomic_set_mask)
blr
/*
- * I/O string operations
- *
- * insb(port, buf, len)
- * outsb(port, buf, len)
- * insw(port, buf, len)
- * outsw(port, buf, len)
- * insl(port, buf, len)
- * outsl(port, buf, len)
- * insw_ns(port, buf, len)
- * outsw_ns(port, buf, len)
- * insl_ns(port, buf, len)
- * outsl_ns(port, buf, len)
- *
- * The *_ns versions don't do byte-swapping.
- */
-_GLOBAL(_insb)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,1
- blelr-
-00: lbz r5,0(r3)
- eieio
- stbu r5,1(r4)
- bdnz 00b
- blr
-
-_GLOBAL(_outsb)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,1
- blelr-
-00: lbzu r5,1(r4)
- stb r5,0(r3)
- eieio
- bdnz 00b
- blr
-
-_GLOBAL(_insw)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,2
- blelr-
-00: lhbrx r5,0,r3
- eieio
- sthu r5,2(r4)
- bdnz 00b
- blr
-
-_GLOBAL(_outsw)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,2
- blelr-
-00: lhzu r5,2(r4)
- eieio
- sthbrx r5,0,r3
- bdnz 00b
- blr
-
-_GLOBAL(_insl)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,4
- blelr-
-00: lwbrx r5,0,r3
- eieio
- stwu r5,4(r4)
- bdnz 00b
- blr
-
-_GLOBAL(_outsl)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,4
- blelr-
-00: lwzu r5,4(r4)
- stwbrx r5,0,r3
- eieio
- bdnz 00b
- blr
-
-_GLOBAL(__ide_mm_insw)
-_GLOBAL(_insw_ns)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,2
- blelr-
-00: lhz r5,0(r3)
- eieio
- sthu r5,2(r4)
- bdnz 00b
- blr
-
-_GLOBAL(__ide_mm_outsw)
-_GLOBAL(_outsw_ns)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,2
- blelr-
-00: lhzu r5,2(r4)
- sth r5,0(r3)
- eieio
- bdnz 00b
- blr
-
-_GLOBAL(__ide_mm_insl)
-_GLOBAL(_insl_ns)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,4
- blelr-
-00: lwz r5,0(r3)
- eieio
- stwu r5,4(r4)
- bdnz 00b
- blr
-
-_GLOBAL(__ide_mm_outsl)
-_GLOBAL(_outsl_ns)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,4
- blelr-
-00: lwzu r5,4(r4)
- stw r5,0(r3)
- eieio
- bdnz 00b
- blr
-
-/*
* Extended precision shifts.
*
* Updated to be valid for shift counts from 0 to 63 inclusive.
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index e8883d42c43..580891cb8cc 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -1,14 +1,12 @@
/*
- * arch/powerpc/kernel/misc64.S
- *
* This file contains miscellaneous low-level functions.
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
* and Paul Mackerras.
* Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
- * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
- *
+ * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
@@ -30,41 +28,10 @@
.text
-/*
- * Returns (address we are running at) - (address we were linked at)
- * for use before the text and data are mapped to KERNELBASE.
- */
-
-_GLOBAL(reloc_offset)
- mflr r0
- bl 1f
-1: mflr r3
- LOAD_REG_IMMEDIATE(r4,1b)
- subf r3,r4,r3
- mtlr r0
- blr
-
-/*
- * add_reloc_offset(x) returns x + reloc_offset().
- */
-_GLOBAL(add_reloc_offset)
- mflr r0
- bl 1f
-1: mflr r5
- LOAD_REG_IMMEDIATE(r4,1b)
- subf r5,r4,r5
- add r3,r3,r5
- mtlr r0
- blr
-
_GLOBAL(get_msr)
mfmsr r3
blr
-_GLOBAL(get_dar)
- mfdar r3
- blr
-
_GLOBAL(get_srr0)
mfsrr0 r3
blr
@@ -72,10 +39,6 @@ _GLOBAL(get_srr0)
_GLOBAL(get_srr1)
mfsrr1 r3
blr
-
-_GLOBAL(get_sp)
- mr r3,r1
- blr
#ifdef CONFIG_IRQSTACKS
_GLOBAL(call_do_softirq)
@@ -101,48 +64,6 @@ _GLOBAL(call___do_IRQ)
blr
#endif /* CONFIG_IRQSTACKS */
- /*
- * To be called by C code which needs to do some operations with MMU
- * disabled. Note that interrupts have to be disabled by the caller
- * prior to calling us. The code called _MUST_ be in the RMO of course
- * and part of the linear mapping as we don't attempt to translate the
- * stack pointer at all. The function is called with the stack switched
- * to this CPU emergency stack
- *
- * prototype is void *call_with_mmu_off(void *func, void *data);
- *
- * the called function is expected to be of the form
- *
- * void *called(void *data);
- */
-_GLOBAL(call_with_mmu_off)
- mflr r0 /* get link, save it on stackframe */
- std r0,16(r1)
- mr r1,r5 /* save old stack ptr */
- ld r1,PACAEMERGSP(r13) /* get emerg. stack */
- subi r1,r1,STACK_FRAME_OVERHEAD
- std r0,16(r1) /* save link on emerg. stack */
- std r5,0(r1) /* save old stack ptr in backchain */
- ld r3,0(r3) /* get to real function ptr (assume same TOC) */
- bl 2f /* we need LR to return, continue at label 2 */
-
- ld r0,16(r1) /* we return here from the call, get LR and */
- ld r1,0(r1) /* .. old stack ptr */
- mtspr SPRN_SRR0,r0 /* and get back to virtual mode with these */
- mfmsr r4
- ori r4,r4,MSR_IR|MSR_DR
- mtspr SPRN_SRR1,r4
- rfid
-
-2: mtspr SPRN_SRR0,r3 /* coming from above, enter real mode */
- mr r3,r4 /* get parameter */
- mfmsr r0
- ori r0,r0,MSR_IR|MSR_DR
- xori r0,r0,MSR_IR|MSR_DR
- mtspr SPRN_SRR1,r0
- rfid
-
-
.section ".toc","aw"
PPC64_CACHES:
.tc ppc64_caches[TC],ppc64_caches
@@ -323,144 +244,6 @@ _GLOBAL(__flush_dcache_icache)
bdnz 1b
isync
blr
-
-/*
- * I/O string operations
- *
- * insb(port, buf, len)
- * outsb(port, buf, len)
- * insw(port, buf, len)
- * outsw(port, buf, len)
- * insl(port, buf, len)
- * outsl(port, buf, len)
- * insw_ns(port, buf, len)
- * outsw_ns(port, buf, len)
- * insl_ns(port, buf, len)
- * outsl_ns(port, buf, len)
- *
- * The *_ns versions don't do byte-swapping.
- */
-_GLOBAL(_insb)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,1
- blelr-
-00: lbz r5,0(r3)
- eieio
- stbu r5,1(r4)
- bdnz 00b
- twi 0,r5,0
- isync
- blr
-
-_GLOBAL(_outsb)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,1
- blelr-
-00: lbzu r5,1(r4)
- stb r5,0(r3)
- bdnz 00b
- sync
- blr
-
-_GLOBAL(_insw)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,2
- blelr-
-00: lhbrx r5,0,r3
- eieio
- sthu r5,2(r4)
- bdnz 00b
- twi 0,r5,0
- isync
- blr
-
-_GLOBAL(_outsw)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,2
- blelr-
-00: lhzu r5,2(r4)
- sthbrx r5,0,r3
- bdnz 00b
- sync
- blr
-
-_GLOBAL(_insl)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,4
- blelr-
-00: lwbrx r5,0,r3
- eieio
- stwu r5,4(r4)
- bdnz 00b
- twi 0,r5,0
- isync
- blr
-
-_GLOBAL(_outsl)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,4
- blelr-
-00: lwzu r5,4(r4)
- stwbrx r5,0,r3
- bdnz 00b
- sync
- blr
-
-/* _GLOBAL(ide_insw) now in drivers/ide/ide-iops.c */
-_GLOBAL(_insw_ns)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,2
- blelr-
-00: lhz r5,0(r3)
- eieio
- sthu r5,2(r4)
- bdnz 00b
- twi 0,r5,0
- isync
- blr
-
-/* _GLOBAL(ide_outsw) now in drivers/ide/ide-iops.c */
-_GLOBAL(_outsw_ns)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,2
- blelr-
-00: lhzu r5,2(r4)
- sth r5,0(r3)
- bdnz 00b
- sync
- blr
-
-_GLOBAL(_insl_ns)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,4
- blelr-
-00: lwz r5,0(r3)
- eieio
- stwu r5,4(r4)
- bdnz 00b
- twi 0,r5,0
- isync
- blr
-
-_GLOBAL(_outsl_ns)
- cmpwi 0,r5,0
- mtctr r5
- subi r4,r4,4
- blelr-
-00: lwzu r5,4(r4)
- stw r5,0(r3)
- bdnz 00b
- sync
- blr
/*
* identify_cpu and calls setup_cpu
@@ -605,6 +388,7 @@ _GLOBAL(real_writeb)
blr
#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */
+#ifdef CONFIG_CPU_FREQ_PMAC64
/*
* SCOM access functions for 970 (FX only for now)
*
@@ -673,6 +457,7 @@ _GLOBAL(scom970_write)
/* restore interrupts */
mtmsrd r5,1
blr
+#endif /* CONFIG_CPU_FREQ_PMAC64 */
/*
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index f505a8827e3..a0bb354c1c0 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -16,7 +16,6 @@
#include <asm/ptrace.h>
#include <asm/page.h>
#include <asm/lppaca.h>
-#include <asm/iseries/it_lp_queue.h>
#include <asm/iseries/it_lp_reg_save.h>
#include <asm/paca.h>
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 483455c5bb0..320c913435c 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -30,6 +30,7 @@
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/kexec.h>
+#include <linux/debugfs.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -952,6 +953,7 @@ static struct ibm_pa_feature {
/* put this back once we know how to test if firmware does 64k IO */
{CPU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0},
#endif
+ {CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0},
};
static void __init check_cpu_pa_features(unsigned long node)
@@ -1124,24 +1126,6 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
tce_alloc_end = *lprop;
#endif
-#ifdef CONFIG_PPC_RTAS
- /* To help early debugging via the front panel, we retrieve a minimal
- * set of RTAS infos now if available
- */
- {
- u64 *basep, *entryp, *sizep;
-
- basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL);
- entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL);
- sizep = of_get_flat_dt_prop(node, "linux,rtas-size", NULL);
- if (basep && entryp && sizep) {
- rtas.base = *basep;
- rtas.entry = *entryp;
- rtas.size = *sizep;
- }
- }
-#endif /* CONFIG_PPC_RTAS */
-
#ifdef CONFIG_KEXEC
lprop = (u64*)of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
if (lprop)
@@ -1326,6 +1310,11 @@ void __init early_init_devtree(void *params)
/* Setup flat device-tree pointer */
initial_boot_params = params;
+#ifdef CONFIG_PPC_RTAS
+ /* Some machines might need RTAS info for debugging, grab it now. */
+ of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
+#endif
+
/* Retrieve various informations from the /chosen node of the
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
@@ -2148,3 +2137,27 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
}
return NULL;
}
+
+#ifdef DEBUG
+static struct debugfs_blob_wrapper flat_dt_blob;
+
+static int __init export_flat_device_tree(void)
+{
+ struct dentry *d;
+
+ d = debugfs_create_dir("powerpc", NULL);
+ if (!d)
+ return 1;
+
+ flat_dt_blob.data = initial_boot_params;
+ flat_dt_blob.size = initial_boot_params->totalsize;
+
+ d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR,
+ d, &flat_dt_blob);
+ if (!d)
+ return 1;
+
+ return 0;
+}
+__initcall(export_flat_device_tree);
+#endif
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 17dc7919851..4a4cb559840 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -38,16 +38,19 @@
struct rtas_t rtas = {
.lock = SPIN_LOCK_UNLOCKED
};
+EXPORT_SYMBOL(rtas);
struct rtas_suspend_me_data {
long waiting;
struct rtas_args *args;
};
-EXPORT_SYMBOL(rtas);
-
DEFINE_SPINLOCK(rtas_data_buf_lock);
+EXPORT_SYMBOL(rtas_data_buf_lock);
+
char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned;
+EXPORT_SYMBOL(rtas_data_buf);
+
unsigned long rtas_rmo_buf;
/*
@@ -106,11 +109,71 @@ static void call_rtas_display_status_delay(char c)
}
}
-void __init udbg_init_rtas(void)
+void __init udbg_init_rtas_panel(void)
{
udbg_putc = call_rtas_display_status_delay;
}
+#ifdef CONFIG_UDBG_RTAS_CONSOLE
+
+/* If you think you're dying before early_init_dt_scan_rtas() does its
+ * work, you can hard code the token values for your firmware here and
+ * hardcode rtas.base/entry etc.
+ */
+static unsigned int rtas_putchar_token = RTAS_UNKNOWN_SERVICE;
+static unsigned int rtas_getchar_token = RTAS_UNKNOWN_SERVICE;
+
+static void udbg_rtascon_putc(char c)
+{
+ int tries;
+
+ if (!rtas.base)
+ return;
+
+ /* Add CRs before LFs */
+ if (c == '\n')
+ udbg_rtascon_putc('\r');
+
+ /* if there is more than one character to be displayed, wait a bit */
+ for (tries = 0; tries < 16; tries++) {
+ if (rtas_call(rtas_putchar_token, 1, 1, NULL, c) == 0)
+ break;
+ udelay(1000);
+ }
+}
+
+static int udbg_rtascon_getc_poll(void)
+{
+ int c;
+
+ if (!rtas.base)
+ return -1;
+
+ if (rtas_call(rtas_getchar_token, 0, 2, &c))
+ return -1;
+
+ return c;
+}
+
+static int udbg_rtascon_getc(void)
+{
+ int c;
+
+ while ((c = udbg_rtascon_getc_poll()) == -1)
+ ;
+
+ return c;
+}
+
+
+void __init udbg_init_rtas_console(void)
+{
+ udbg_putc = udbg_rtascon_putc;
+ udbg_getc = udbg_rtascon_getc;
+ udbg_getc_poll = udbg_rtascon_getc_poll;
+}
+#endif /* CONFIG_UDBG_RTAS_CONSOLE */
+
void rtas_progress(char *s, unsigned short hex)
{
struct device_node *root;
@@ -236,6 +299,7 @@ int rtas_token(const char *service)
tokp = (int *) get_property(rtas.dev, service, NULL);
return tokp ? *tokp : RTAS_UNKNOWN_SERVICE;
}
+EXPORT_SYMBOL(rtas_token);
#ifdef CONFIG_RTAS_ERROR_LOGGING
/*
@@ -328,7 +392,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
char *buff_copy = NULL;
int ret;
- if (token == RTAS_UNKNOWN_SERVICE)
+ if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
return -1;
/* Gotta do something different here, use global lock for now... */
@@ -369,6 +433,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
}
return ret;
}
+EXPORT_SYMBOL(rtas_call);
/* For RTAS_BUSY (-2), delay for 1 millisecond. For an extended busy status
* code of 990n, perform the hinted delay of 10^n (last digit) milliseconds.
@@ -388,6 +453,7 @@ unsigned int rtas_busy_delay_time(int status)
return ms;
}
+EXPORT_SYMBOL(rtas_busy_delay_time);
/* For an RTAS busy status code, perform the hinted delay. */
unsigned int rtas_busy_delay(int status)
@@ -401,6 +467,7 @@ unsigned int rtas_busy_delay(int status)
return ms;
}
+EXPORT_SYMBOL(rtas_busy_delay);
int rtas_error_rc(int rtas_rc)
{
@@ -446,6 +513,7 @@ int rtas_get_power_level(int powerdomain, int *level)
return rtas_error_rc(rc);
return rc;
}
+EXPORT_SYMBOL(rtas_get_power_level);
int rtas_set_power_level(int powerdomain, int level, int *setlevel)
{
@@ -463,6 +531,7 @@ int rtas_set_power_level(int powerdomain, int level, int *setlevel)
return rtas_error_rc(rc);
return rc;
}
+EXPORT_SYMBOL(rtas_set_power_level);
int rtas_get_sensor(int sensor, int index, int *state)
{
@@ -480,6 +549,7 @@ int rtas_get_sensor(int sensor, int index, int *state)
return rtas_error_rc(rc);
return rc;
}
+EXPORT_SYMBOL(rtas_get_sensor);
int rtas_set_indicator(int indicator, int index, int new_value)
{
@@ -497,6 +567,7 @@ int rtas_set_indicator(int indicator, int index, int new_value)
return rtas_error_rc(rc);
return rc;
}
+EXPORT_SYMBOL(rtas_set_indicator);
void rtas_restart(char *cmd)
{
@@ -791,14 +862,34 @@ void __init rtas_initialize(void)
#endif
}
+int __init early_init_dt_scan_rtas(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ u32 *basep, *entryp, *sizep;
-EXPORT_SYMBOL(rtas_token);
-EXPORT_SYMBOL(rtas_call);
-EXPORT_SYMBOL(rtas_data_buf);
-EXPORT_SYMBOL(rtas_data_buf_lock);
-EXPORT_SYMBOL(rtas_busy_delay_time);
-EXPORT_SYMBOL(rtas_busy_delay);
-EXPORT_SYMBOL(rtas_get_sensor);
-EXPORT_SYMBOL(rtas_get_power_level);
-EXPORT_SYMBOL(rtas_set_power_level);
-EXPORT_SYMBOL(rtas_set_indicator);
+ if (depth != 1 || strcmp(uname, "rtas") != 0)
+ return 0;
+
+ basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL);
+ entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL);
+ sizep = of_get_flat_dt_prop(node, "rtas-size", NULL);
+
+ if (basep && entryp && sizep) {
+ rtas.base = *basep;
+ rtas.entry = *entryp;
+ rtas.size = *sizep;
+ }
+
+#ifdef CONFIG_UDBG_RTAS_CONSOLE
+ basep = of_get_flat_dt_prop(node, "put-term-char", NULL);
+ if (basep)
+ rtas_putchar_token = *basep;
+
+ basep = of_get_flat_dt_prop(node, "get-term-char", NULL);
+ if (basep)
+ rtas_getchar_token = *basep;
+#endif
+
+ /* break now */
+ return 1;
+}
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 78f3a5fd43f..175539c9afa 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -149,6 +149,13 @@ early_param("smt-enabled", early_smt_enabled);
#define check_smt_enabled()
#endif /* CONFIG_SMP */
+/* Put the paca pointer into r13 and SPRG3 */
+void __init setup_paca(int cpu)
+{
+ local_paca = &paca[cpu];
+ mtspr(SPRN_SPRG3, local_paca);
+}
+
/*
* Early initialization entry point. This is called by head.S
* with MMU translation disabled. We rely on the "feature" of
@@ -170,6 +177,9 @@ early_param("smt-enabled", early_smt_enabled);
void __init early_setup(unsigned long dt_ptr)
{
+ /* Assume we're on cpu 0 for now. Don't write to the paca yet! */
+ setup_paca(0);
+
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
@@ -183,7 +193,7 @@ void __init early_setup(unsigned long dt_ptr)
early_init_devtree(__va(dt_ptr));
/* Now we know the logical id of our boot cpu, setup the paca. */
- setup_boot_paca();
+ setup_paca(boot_cpuid);
/* Fix up paca fields required for the boot cpu */
get_paca()->cpu_start = 1;
@@ -350,19 +360,11 @@ void __init setup_system(void)
*/
unflatten_device_tree();
-#ifdef CONFIG_KEXEC
- kexec_setup(); /* requires unflattened device tree. */
-#endif
-
/*
* Fill the ppc64_caches & systemcfg structures with informations
* retrieved from the device-tree. Need to be called before
* finish_device_tree() since the later requires some of the
- * informations filled up here to properly parse the interrupt
- * tree.
- * It also sets up the cache line sizes which allows to call
- * routines like flush_icache_range (used by the hash init
- * later on).
+ * informations filled up here to properly parse the interrupt tree.
*/
initialize_cache_info();
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 52f5659534f..fa6bd97b6b9 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -52,9 +52,13 @@
#include <asm/firmware.h>
#include <asm/processor.h>
#endif
+#include <asm/kexec.h>
#ifdef CONFIG_PPC64 /* XXX */
#define _IO_BASE pci_io_base
+#ifdef CONFIG_KEXEC
+cpumask_t cpus_in_sr = CPU_MASK_NONE;
+#endif
#endif
#ifdef CONFIG_DEBUGGER
@@ -97,7 +101,7 @@ static DEFINE_SPINLOCK(die_lock);
int die(const char *str, struct pt_regs *regs, long err)
{
- static int die_counter, crash_dump_start = 0;
+ static int die_counter;
if (debugger(regs))
return 1;
@@ -137,21 +141,12 @@ int die(const char *str, struct pt_regs *regs, long err)
print_modules();
show_regs(regs);
bust_spinlocks(0);
+ spin_unlock_irq(&die_lock);
- if (!crash_dump_start && kexec_should_crash(current)) {
- crash_dump_start = 1;
- spin_unlock_irq(&die_lock);
+ if (kexec_should_crash(current) ||
+ kexec_sr_activated(smp_processor_id()))
crash_kexec(regs);
- /* NOTREACHED */
- }
- spin_unlock_irq(&die_lock);
- if (crash_dump_start)
- /*
- * Only for soft-reset: Other CPUs will be responded to an IPI
- * sent by first kexec CPU.
- */
- for(;;)
- ;
+ crash_kexec_secondary(regs);
if (in_interrupt())
panic("Fatal exception in interrupt");
@@ -215,6 +210,10 @@ void system_reset_exception(struct pt_regs *regs)
return;
}
+#ifdef CONFIG_KEXEC
+ cpu_set(smp_processor_id(), cpus_in_sr);
+#endif
+
die("System Reset", regs, SIGABRT);
/* Must die if the interrupt is not recoverable */
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index 67d9fd9ae2b..759afd5e0d8 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -34,9 +34,12 @@ void __init udbg_early_init(void)
#elif defined(CONFIG_PPC_EARLY_DEBUG_G5)
/* For use on Apple G5 machines */
udbg_init_pmac_realmode();
-#elif defined(CONFIG_PPC_EARLY_DEBUG_RTAS)
+#elif defined(CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL)
/* RTAS panel debug */
- udbg_init_rtas();
+ udbg_init_rtas_panel();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE)
+ /* RTAS console debug */
+ udbg_init_rtas_console();
#elif defined(CONFIG_PPC_EARLY_DEBUG_MAPLE)
/* Maple real mode debug */
udbg_init_maple_realmode();
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index a0f3cbd00d3..c90f124f3c7 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -520,7 +520,7 @@ static inline int tlb_batching_enabled(void)
}
#endif
-void hpte_init_native(void)
+void __init hpte_init_native(void)
{
ppc_md.hpte_invalidate = native_hpte_invalidate;
ppc_md.hpte_updatepp = native_hpte_updatepp;
@@ -530,5 +530,4 @@ void hpte_init_native(void)
ppc_md.hpte_clear_all = native_hpte_clear;
if (tlb_batching_enabled())
ppc_md.flush_hash_range = native_flush_hash_range;
- htab_finish_init();
}
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index d03fd2b4445..3cc6d68f711 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -167,34 +167,12 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
hash = hpt_hash(va, shift);
hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
- /* The crap below can be cleaned once ppd_md.probe() can
- * set up the hash callbacks, thus we can just used the
- * normal insert callback here.
- */
-#ifdef CONFIG_PPC_ISERIES
- if (machine_is(iseries))
- ret = iSeries_hpte_insert(hpteg, va,
- paddr,
- tmp_mode,
- HPTE_V_BOLTED,
- psize);
- else
-#endif
-#ifdef CONFIG_PPC_PSERIES
- if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR))
- ret = pSeries_lpar_hpte_insert(hpteg, va,
- paddr,
- tmp_mode,
- HPTE_V_BOLTED,
- psize);
- else
-#endif
-#ifdef CONFIG_PPC_MULTIPLATFORM
- ret = native_hpte_insert(hpteg, va,
- paddr,
- tmp_mode, HPTE_V_BOLTED,
- psize);
-#endif
+ DBG("htab_bolt_mapping: calling %p\n", ppc_md.hpte_insert);
+
+ BUG_ON(!ppc_md.hpte_insert);
+ ret = ppc_md.hpte_insert(hpteg, va, paddr,
+ tmp_mode, HPTE_V_BOLTED, psize);
+
if (ret < 0)
break;
}
@@ -413,6 +391,41 @@ void create_section_mapping(unsigned long start, unsigned long end)
}
#endif /* CONFIG_MEMORY_HOTPLUG */
+static inline void make_bl(unsigned int *insn_addr, void *func)
+{
+ unsigned long funcp = *((unsigned long *)func);
+ int offset = funcp - (unsigned long)insn_addr;
+
+ *insn_addr = (unsigned int)(0x48000001 | (offset & 0x03fffffc));
+ flush_icache_range((unsigned long)insn_addr, 4+
+ (unsigned long)insn_addr);
+}
+
+static void __init htab_finish_init(void)
+{
+ extern unsigned int *htab_call_hpte_insert1;
+ extern unsigned int *htab_call_hpte_insert2;
+ extern unsigned int *htab_call_hpte_remove;
+ extern unsigned int *htab_call_hpte_updatepp;
+
+#ifdef CONFIG_PPC_64K_PAGES
+ extern unsigned int *ht64_call_hpte_insert1;
+ extern unsigned int *ht64_call_hpte_insert2;
+ extern unsigned int *ht64_call_hpte_remove;
+ extern unsigned int *ht64_call_hpte_updatepp;
+
+ make_bl(ht64_call_hpte_insert1, ppc_md.hpte_insert);
+ make_bl(ht64_call_hpte_insert2, ppc_md.hpte_insert);
+ make_bl(ht64_call_hpte_remove, ppc_md.hpte_remove);
+ make_bl(ht64_call_hpte_updatepp, ppc_md.hpte_updatepp);
+#endif /* CONFIG_PPC_64K_PAGES */
+
+ make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert);
+ make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert);
+ make_bl(htab_call_hpte_remove, ppc_md.hpte_remove);
+ make_bl(htab_call_hpte_updatepp, ppc_md.hpte_updatepp);
+}
+
void __init htab_initialize(void)
{
unsigned long table;
@@ -525,6 +538,8 @@ void __init htab_initialize(void)
mmu_linear_psize));
}
+ htab_finish_init();
+
DBG(" <- htab_initialize()\n");
}
#undef KB
@@ -787,16 +802,6 @@ void flush_hash_range(unsigned long number, int local)
}
}
-static inline void make_bl(unsigned int *insn_addr, void *func)
-{
- unsigned long funcp = *((unsigned long *)func);
- int offset = funcp - (unsigned long)insn_addr;
-
- *insn_addr = (unsigned int)(0x48000001 | (offset & 0x03fffffc));
- flush_icache_range((unsigned long)insn_addr, 4+
- (unsigned long)insn_addr);
-}
-
/*
* low_hash_fault is called when we the low level hash code failed
* to instert a PTE due to an hypervisor error
@@ -815,28 +820,3 @@ void low_hash_fault(struct pt_regs *regs, unsigned long address)
}
bad_page_fault(regs, address, SIGBUS);
}
-
-void __init htab_finish_init(void)
-{
- extern unsigned int *htab_call_hpte_insert1;
- extern unsigned int *htab_call_hpte_insert2;
- extern unsigned int *htab_call_hpte_remove;
- extern unsigned int *htab_call_hpte_updatepp;
-
-#ifdef CONFIG_PPC_64K_PAGES
- extern unsigned int *ht64_call_hpte_insert1;
- extern unsigned int *ht64_call_hpte_insert2;
- extern unsigned int *ht64_call_hpte_remove;
- extern unsigned int *ht64_call_hpte_updatepp;
-
- make_bl(ht64_call_hpte_insert1, ppc_md.hpte_insert);
- make_bl(ht64_call_hpte_insert2, ppc_md.hpte_insert);
- make_bl(ht64_call_hpte_remove, ppc_md.hpte_remove);
- make_bl(ht64_call_hpte_updatepp, ppc_md.hpte_updatepp);
-#endif /* CONFIG_PPC_64K_PAGES */
-
- make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert);
- make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert);
- make_bl(htab_call_hpte_remove, ppc_md.hpte_remove);
- make_bl(htab_call_hpte_updatepp, ppc_md.hpte_updatepp);
-}
diff --git a/arch/powerpc/mm/mmu_context_64.c b/arch/powerpc/mm/mmu_context_64.c
index 65d18dca266..e2051efa09c 100644
--- a/arch/powerpc/mm/mmu_context_64.c
+++ b/arch/powerpc/mm/mmu_context_64.c
@@ -44,7 +44,9 @@ again:
return err;
if (index > MAX_CONTEXT) {
+ spin_lock(&mmu_context_lock);
idr_remove(&mmu_context_idr, index);
+ spin_unlock(&mmu_context_lock);
return -ENOMEM;
}
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 3a87863d287..d1ecc0f9ab5 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -7,6 +7,7 @@ choice
config MPC8641_HPCN
bool "Freescale MPC8641 HPCN"
+ select PPC_I8259
help
This option enables support for the MPC8641 HPCN board.
@@ -28,9 +29,4 @@ config PPC_INDIRECT_PCI_BE
depends on PPC_86xx
default y
-config PPC_STD_MMU
- bool
- depends on PPC_86xx
- default y
-
endmenu
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 7be796c5d5c..476a6eeee71 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -2,9 +2,6 @@
# Makefile for the PowerPC 86xx linux kernel.
#
-
-ifeq ($(CONFIG_PPC_86xx),y)
obj-$(CONFIG_SMP) += mpc86xx_smp.o
-endif
obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o
obj-$(CONFIG_PCI) += pci.o mpc86xx_pcie.o
diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
index 5042253758b..5d2bcf78cef 100644
--- a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
+++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
@@ -14,7 +14,6 @@
#ifndef __MPC8641_HPCN_H__
#define __MPC8641_HPCN_H__
-#include <linux/config.h>
#include <linux/init.h>
/* PCI interrupt controller */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h
index e3c9e4f417d..2834462590b 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx.h
+++ b/arch/powerpc/platforms/86xx/mpc86xx.h
@@ -15,11 +15,13 @@
* mpc86xx_* files. Mostly for use by mpc86xx_setup().
*/
-extern int __init add_bridge(struct device_node *dev);
+extern int add_bridge(struct device_node *dev);
-extern void __init setup_indirect_pcie(struct pci_controller *hose,
+extern int mpc86xx_exclude_device(u_char bus, u_char devfn);
+
+extern void setup_indirect_pcie(struct pci_controller *hose,
u32 cfg_addr, u32 cfg_data);
-extern void __init setup_indirect_pcie_nomap(struct pci_controller *hose,
+extern void setup_indirect_pcie_nomap(struct pci_controller *hose,
void __iomem *cfg_addr,
void __iomem *cfg_data);
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 483c21df181..ebae73eb006 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -12,7 +12,6 @@
* option) any later version.
*/
-#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@@ -36,6 +35,7 @@
#include <sysdev/fsl_soc.h>
#include "mpc86xx.h"
+#include "mpc8641_hpcn.h"
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
@@ -186,17 +186,130 @@ mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET;
}
+static void __devinit quirk_ali1575(struct pci_dev *dev)
+{
+ unsigned short temp;
+
+ /*
+ * ALI1575 interrupts route table setup:
+ *
+ * IRQ pin IRQ#
+ * PIRQA ---- 3
+ * PIRQB ---- 4
+ * PIRQC ---- 5
+ * PIRQD ---- 6
+ * PIRQE ---- 9
+ * PIRQF ---- 10
+ * PIRQG ---- 11
+ * PIRQH ---- 12
+ *
+ * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
+ * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
+ */
+ pci_write_config_dword(dev, 0x48, 0xb9317542);
+
+ /* USB 1.1 OHCI controller 1, interrupt: PIRQE */
+ pci_write_config_byte(dev, 0x86, 0x0c);
+
+ /* USB 1.1 OHCI controller 2, interrupt: PIRQF */
+ pci_write_config_byte(dev, 0x87, 0x0d);
+
+ /* USB 1.1 OHCI controller 3, interrupt: PIRQH */
+ pci_write_config_byte(dev, 0x88, 0x0f);
+
+ /* USB 2.0 controller, interrupt: PIRQ7 */
+ pci_write_config_byte(dev, 0x74, 0x06);
+
+ /* Audio controller, interrupt: PIRQE */
+ pci_write_config_byte(dev, 0x8a, 0x0c);
+
+ /* Modem controller, interrupt: PIRQF */
+ pci_write_config_byte(dev, 0x8b, 0x0d);
+
+ /* HD audio controller, interrupt: PIRQG */
+ pci_write_config_byte(dev, 0x8c, 0x0e);
+
+ /* Serial ATA interrupt: PIRQD */
+ pci_write_config_byte(dev, 0x8d, 0x0b);
+
+ /* SMB interrupt: PIRQH */
+ pci_write_config_byte(dev, 0x8e, 0x0f);
+
+ /* PMU ACPI SCI interrupt: PIRQH */
+ pci_write_config_byte(dev, 0x8f, 0x0f);
+
+ /* Primary PATA IDE IRQ: 14
+ * Secondary PATA IDE IRQ: 15
+ */
+ pci_write_config_byte(dev, 0x44, 0x3d);
+ pci_write_config_byte(dev, 0x75, 0x0f);
+
+ /* Set IRQ14 and IRQ15 to legacy IRQs */
+ pci_read_config_word(dev, 0x46, &temp);
+ temp |= 0xc000;
+ pci_write_config_word(dev, 0x46, temp);
+
+ /* Set i8259 interrupt trigger
+ * IRQ 3: Level
+ * IRQ 4: Level
+ * IRQ 5: Level
+ * IRQ 6: Level
+ * IRQ 7: Level
+ * IRQ 9: Level
+ * IRQ 10: Level
+ * IRQ 11: Level
+ * IRQ 12: Level
+ * IRQ 14: Edge
+ * IRQ 15: Edge
+ */
+ outb(0xfa, 0x4d0);
+ outb(0x1e, 0x4d1);
+}
-int
-mpc86xx_exclude_device(u_char bus, u_char devfn)
+static void __devinit quirk_uli5288(struct pci_dev *dev)
{
-#if !defined(CONFIG_PCI)
- if (bus == 0 && PCI_SLOT(devfn) == 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-#endif
+ unsigned char c;
+
+ pci_read_config_byte(dev,0x83,&c);
+ c |= 0x80;
+ pci_write_config_byte(dev, 0x83, c);
+
+ pci_write_config_byte(dev, 0x09, 0x01);
+ pci_write_config_byte(dev, 0x0a, 0x06);
+
+ pci_read_config_byte(dev,0x83,&c);
+ c &= 0x7f;
+ pci_write_config_byte(dev, 0x83, c);
- return PCIBIOS_SUCCESSFUL;
+ pci_read_config_byte(dev,0x84,&c);
+ c |= 0x01;
+ pci_write_config_byte(dev, 0x84, c);
}
+
+static void __devinit quirk_uli5229(struct pci_dev *dev)
+{
+ unsigned short temp;
+ pci_write_config_word(dev, 0x04, 0x0405);
+ pci_read_config_word(dev, 0x4a, &temp);
+ temp |= 0x1000;
+ pci_write_config_word(dev, 0x4a, temp);
+}
+
+static void __devinit early_uli5249(struct pci_dev *dev)
+{
+ unsigned char temp;
+ pci_write_config_word(dev, 0x04, 0x0007);
+ pci_read_config_byte(dev, 0x7c, &temp);
+ pci_write_config_byte(dev, 0x7c, 0x80);
+ pci_write_config_byte(dev, 0x09, 0x01);
+ pci_write_config_byte(dev, 0x7c, temp);
+ dev->class |= 0x1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
#endif /* CONFIG_PCI */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index 944ec4b7141..bb7fb41933a 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -10,7 +10,6 @@
* option) any later version.
*/
-#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -34,8 +33,8 @@ extern unsigned long __secondary_hold_acknowledge;
static void __init
smp_86xx_release_core(int nr)
{
- void *mcm_vaddr;
- unsigned long vaddr, pcr;
+ __be32 __iomem *mcm_vaddr;
+ unsigned long pcr;
if (nr < 0 || nr >= NR_CPUS)
return;
@@ -45,10 +44,9 @@ smp_86xx_release_core(int nr)
*/
mcm_vaddr = ioremap(get_immrbase() + MPC86xx_MCM_OFFSET,
MPC86xx_MCM_SIZE);
- vaddr = (unsigned long)mcm_vaddr + MCM_PORT_CONFIG_OFFSET;
- pcr = in_be32((volatile unsigned *)vaddr);
+ pcr = in_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2));
pcr |= 1 << (nr + 24);
- out_be32((volatile unsigned *)vaddr, pcr);
+ out_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2), pcr);
}
diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
index 5180df7c75b..bc513904311 100644
--- a/arch/powerpc/platforms/86xx/pci.c
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -12,7 +12,6 @@
* option) any later version.
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -122,15 +121,12 @@ static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource
static void __init
mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
{
- volatile struct ccsr_pex *pcie;
u16 cmd;
unsigned int temps;
DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n",
pcie_offset, pcie_size);
- pcie = ioremap(pcie_offset, pcie_size);
-
early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
| PCI_COMMAND_IO;
@@ -144,6 +140,14 @@ mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps);
}
+int mpc86xx_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
int __init add_bridge(struct device_node *dev)
{
int len;
@@ -198,128 +202,3 @@ int __init add_bridge(struct device_node *dev)
return 0;
}
-
-static void __devinit quirk_ali1575(struct pci_dev *dev)
-{
- unsigned short temp;
-
- /*
- * ALI1575 interrupts route table setup:
- *
- * IRQ pin IRQ#
- * PIRQA ---- 3
- * PIRQB ---- 4
- * PIRQC ---- 5
- * PIRQD ---- 6
- * PIRQE ---- 9
- * PIRQF ---- 10
- * PIRQG ---- 11
- * PIRQH ---- 12
- *
- * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
- * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
- */
- pci_write_config_dword(dev, 0x48, 0xb9317542);
-
- /* USB 1.1 OHCI controller 1, interrupt: PIRQE */
- pci_write_config_byte(dev, 0x86, 0x0c);
-
- /* USB 1.1 OHCI controller 2, interrupt: PIRQF */
- pci_write_config_byte(dev, 0x87, 0x0d);
-
- /* USB 1.1 OHCI controller 3, interrupt: PIRQH */
- pci_write_config_byte(dev, 0x88, 0x0f);
-
- /* USB 2.0 controller, interrupt: PIRQ7 */
- pci_write_config_byte(dev, 0x74, 0x06);
-
- /* Audio controller, interrupt: PIRQE */
- pci_write_config_byte(dev, 0x8a, 0x0c);
-
- /* Modem controller, interrupt: PIRQF */
- pci_write_config_byte(dev, 0x8b, 0x0d);
-
- /* HD audio controller, interrupt: PIRQG */
- pci_write_config_byte(dev, 0x8c, 0x0e);
-
- /* Serial ATA interrupt: PIRQD */
- pci_write_config_byte(dev, 0x8d, 0x0b);
-
- /* SMB interrupt: PIRQH */
- pci_write_config_byte(dev, 0x8e, 0x0f);
-
- /* PMU ACPI SCI interrupt: PIRQH */
- pci_write_config_byte(dev, 0x8f, 0x0f);
-
- /* Primary PATA IDE IRQ: 14
- * Secondary PATA IDE IRQ: 15
- */
- pci_write_config_byte(dev, 0x44, 0x3d);
- pci_write_config_byte(dev, 0x75, 0x0f);
-
- /* Set IRQ14 and IRQ15 to legacy IRQs */
- pci_read_config_word(dev, 0x46, &temp);
- temp |= 0xc000;
- pci_write_config_word(dev, 0x46, temp);
-
- /* Set i8259 interrupt trigger
- * IRQ 3: Level
- * IRQ 4: Level
- * IRQ 5: Level
- * IRQ 6: Level
- * IRQ 7: Level
- * IRQ 9: Level
- * IRQ 10: Level
- * IRQ 11: Level
- * IRQ 12: Level
- * IRQ 14: Edge
- * IRQ 15: Edge
- */
- outb(0xfa, 0x4d0);
- outb(0x1e, 0x4d1);
-}
-
-static void __devinit quirk_uli5288(struct pci_dev *dev)
-{
- unsigned char c;
-
- pci_read_config_byte(dev,0x83,&c);
- c |= 0x80;
- pci_write_config_byte(dev, 0x83, c);
-
- pci_write_config_byte(dev, 0x09, 0x01);
- pci_write_config_byte(dev, 0x0a, 0x06);
-
- pci_read_config_byte(dev,0x83,&c);
- c &= 0x7f;
- pci_write_config_byte(dev, 0x83, c);
-
- pci_read_config_byte(dev,0x84,&c);
- c |= 0x01;
- pci_write_config_byte(dev, 0x84, c);
-}
-
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
- unsigned short temp;
- pci_write_config_word(dev, 0x04, 0x0405);
- pci_read_config_word(dev, 0x4a, &temp);
- temp |= 0x1000;
- pci_write_config_word(dev, 0x4a, temp);
-}
-
-static void __devinit early_uli5249(struct pci_dev *dev)
-{
- unsigned char temp;
- pci_write_config_word(dev, 0x04, 0x0007);
- pci_read_config_byte(dev, 0x7c, &temp);
- pci_write_config_byte(dev, 0x7c, 0x80);
- pci_write_config_byte(dev, 0x09, 0x01);
- pci_write_config_byte(dev, 0x7c, temp);
- dev->class |= 0x1;
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 29286369456..5cf46dc5789 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_PPC_PSERIES) += pseries/
obj-$(CONFIG_PPC_ISERIES) += iseries/
obj-$(CONFIG_PPC_MAPLE) += maple/
obj-$(CONFIG_PPC_CELL) += cell/
+obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 352bbbacde9..0c8c7b6ab89 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -6,6 +6,7 @@ config SPU_FS
default m
depends on PPC_CELL
select SPU_BASE
+ select MEMORY_HOTPLUG
help
The SPU file system is used to access Synergistic Processing
Units on machines implementing the Broadband Processor
@@ -18,7 +19,6 @@ config SPU_BASE
config SPUFS_MMAP
bool
depends on SPU_FS && SPARSEMEM
- select MEMORY_HOTPLUG
default y
config CBE_RAS
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 3d1831d331e..00d112f9227 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -125,8 +125,6 @@ static void __init cell_init_early(void)
{
DBG(" -> cell_init_early()\n");
- hpte_init_native();
-
cell_init_iommu();
ppc64_interrupt_controller = IC_CELL_PIC;
@@ -139,11 +137,17 @@ static int __init cell_probe(void)
{
unsigned long root = of_get_flat_dt_root();
- if (of_flat_dt_is_compatible(root, "IBM,CBEA") ||
- of_flat_dt_is_compatible(root, "IBM,CPBW-1.0"))
- return 1;
+ if (!of_flat_dt_is_compatible(root, "IBM,CBEA") &&
+ !of_flat_dt_is_compatible(root, "IBM,CPBW-1.0"))
+ return 0;
+
+#ifdef CONFIG_UDBG_RTAS_CONSOLE
+ udbg_init_rtas_console();
+#endif
+
+ hpte_init_native();
- return 0;
+ return 1;
}
/*
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index db82f503ba2..b306723abb8 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -168,12 +168,12 @@ spu_irq_class_0_bottom(struct spu *spu)
stat &= mask;
- if (stat & 1) /* invalid MFC DMA */
- __spu_trap_invalid_dma(spu);
-
- if (stat & 2) /* invalid DMA alignment */
+ if (stat & 1) /* invalid DMA alignment */
__spu_trap_dma_align(spu);
+ if (stat & 2) /* invalid MFC DMA */
+ __spu_trap_invalid_dma(spu);
+
if (stat & 4) /* error on SPU */
__spu_trap_error(spu);
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 7854a380dce..58e794f9da1 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -204,7 +204,7 @@ static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma)
vma->vm_flags |= VM_RESERVED;
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
- | _PAGE_NO_CACHE);
+ | _PAGE_NO_CACHE | _PAGE_GUARDED);
vma->vm_ops = &spufs_cntl_mmap_vmops;
return 0;
@@ -675,7 +675,7 @@ static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma)
vma->vm_flags |= VM_RESERVED;
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
- | _PAGE_NO_CACHE);
+ | _PAGE_NO_CACHE | _PAGE_GUARDED);
vma->vm_ops = &spufs_signal1_mmap_vmops;
return 0;
@@ -762,7 +762,7 @@ static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma)
/* FIXME: */
vma->vm_flags |= VM_RESERVED;
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
- | _PAGE_NO_CACHE);
+ | _PAGE_NO_CACHE | _PAGE_GUARDED);
vma->vm_ops = &spufs_signal2_mmap_vmops;
return 0;
@@ -850,7 +850,7 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma)
vma->vm_flags |= VM_RESERVED;
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
- | _PAGE_NO_CACHE);
+ | _PAGE_NO_CACHE | _PAGE_GUARDED);
vma->vm_ops = &spufs_mss_mmap_vmops;
return 0;
@@ -899,7 +899,7 @@ static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma)
vma->vm_flags |= VM_RESERVED;
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
- | _PAGE_NO_CACHE);
+ | _PAGE_NO_CACHE | _PAGE_GUARDED);
vma->vm_ops = &spufs_mfc_mmap_vmops;
return 0;
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index a656d810a44..c7fea2cca53 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -464,7 +464,8 @@ static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu)
* Poll MFC_CNTL[Ps] until value '11' is read
* (purge complete).
*/
- POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) &
+ POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
+ MFC_CNTL_PURGE_DMA_STATUS_MASK) ==
MFC_CNTL_PURGE_DMA_COMPLETE);
}
@@ -1028,7 +1029,8 @@ static inline void wait_suspend_mfc_complete(struct spu_state *csa,
* Restore, Step 47.
* Poll MFC_CNTL[Ss] until 11 is returned.
*/
- POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) &
+ POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
+ MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
MFC_CNTL_SUSPEND_COMPLETE);
}
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 4fdbc9ae876..ba07a9a7c03 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -74,6 +74,16 @@ config SANDPOINT
Select SANDPOINT if configuring for a Motorola Sandpoint X3
(any flavor).
+config MPC7448HPC2
+ bool "Freescale MPC7448HPC2(Taiga)"
+ select TSI108_BRIDGE
+ select DEFAULT_UIMAGE
+ select PPC_UDBG_16550
+ select MPIC
+ help
+ Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
+ platform
+
config RADSTONE_PPC7D
bool "Radstone Technology PPC7D board"
select PPC_I8259
@@ -221,6 +231,11 @@ config MV64X60
select PPC_INDIRECT_PCI
default y
+config TSI108_BRIDGE
+ bool
+ depends on MPC7448HPC2
+ default y
+
menu "Set bridge options"
depends on MV64X60
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
new file mode 100644
index 00000000000..fa499fe5929
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for the 6xx/7xx/7xxxx linux kernel.
+#
+obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
new file mode 100644
index 00000000000..d7a4fc7ca23
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -0,0 +1,335 @@
+/*
+ * mpc7448_hpc2.c
+ *
+ * Board setup routines for the Freescale Taiga platform
+ *
+ * Author: Jacob Pan
+ * jacob.pan@freescale.com
+ * Author: Xianghua Xiao
+ * x.xiao@freescale.com
+ * Maintainer: Roy Zang <tie-fei.zang@freescale.com>
+ * Add Flat Device Tree support fot mpc7448hpc2 board
+ *
+ * Copyright 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/ide.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/tsi108.h>
+#include <asm/pci-bridge.h>
+#include <asm/reg.h>
+#include <mm/mmu_decl.h>
+#include "mpc7448_hpc2.h"
+#include <asm/tsi108_irq.h>
+#include <asm/mpic.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
+#ifndef CONFIG_PCI
+isa_io_base = MPC7448_HPC2_ISA_IO_BASE;
+isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE;
+pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
+#endif
+
+extern int tsi108_setup_pci(struct device_node *dev);
+extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+extern void tsi108_pci_int_init(void);
+extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused);
+
+/*
+ * Define all of the IRQ senses and polarities. Taken from the
+ * mpc7448hpc manual.
+ * Note: Likely, this table and the following function should be
+ * obtained and derived from the OF Device Tree.
+ */
+
+static u_char mpc7448_hpc2_pic_initsenses[] __initdata = {
+ /* External on-board sources */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */
+ /* Internal Tsi108/109 interrupt sources */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */
+};
+
+int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * find pci slot by devfn in interrupt map of OF tree
+ */
+u8 find_slot_by_devfn(unsigned int *interrupt_map, unsigned int devfn)
+{
+ int i;
+ unsigned int tmp;
+ for (i = 0; i < 4; i++){
+ tmp = interrupt_map[i*4*7];
+ if ((tmp >> 11) == (devfn >> 3))
+ return i;
+ }
+ return i;
+}
+
+/*
+ * Scans the interrupt map for pci device
+ */
+void mpc7448_hpc2_fixup_irq(struct pci_dev *dev)
+{
+ struct pci_controller *hose;
+ struct device_node *node;
+ unsigned int *interrupt;
+ int busnr;
+ int len;
+ u8 slot;
+ u8 pin;
+
+ /* Lookup the hose */
+ busnr = dev->bus->number;
+ hose = pci_bus_to_hose(busnr);
+ if (!hose)
+ printk(KERN_ERR "No pci hose found\n");
+
+ /* Check it has an OF node associated */
+ node = (struct device_node *) hose->arch_data;
+ if (!node)
+ printk(KERN_ERR "No pci node found\n");
+
+ interrupt = (unsigned int *) get_property(node, "interrupt-map", &len);
+ slot = find_slot_by_devfn(interrupt, dev->devfn);
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ if (pin == 0 || pin > 4)
+ pin = 1;
+ pin--;
+ dev->irq = interrupt[slot*4*7 + pin*7 + 5];
+ DBG("TSI_PCI: dev->irq = 0x%x\n", dev->irq);
+}
+/* temporary pci irq map fixup*/
+
+void __init mpc7448_hpc2_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+ for_each_pci_dev(dev) {
+ mpc7448_hpc2_fixup_irq(dev);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ }
+}
+
+static void __init mpc7448_hpc2_setup_arch(void)
+{
+ struct device_node *cpu;
+ struct device_node *np;
+ if (ppc_md.progress)
+ ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0);
+
+ cpu = of_find_node_by_type(NULL, "cpu");
+ if (cpu != 0) {
+ unsigned int *fp;
+
+ fp = (int *)get_property(cpu, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(cpu);
+ }
+ tsi108_csr_vir_base = get_vir_csrbase();
+
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ ROOT_DEV = Root_RAM0;
+#endif
+
+ /* setup PCI host bridge */
+#ifdef CONFIG_PCI
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+ tsi108_setup_pci(np);
+
+ ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device;
+ if (ppc_md.progress)
+ ppc_md.progress("tsi108: resources set", 0x100);
+#endif
+
+ printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n");
+ printk(KERN_INFO
+ "Jointly ported by Freescale and Tundra Semiconductor\n");
+ printk(KERN_INFO
+ "Enabling L2 cache then enabling the HID0 prefetch engine.\n");
+}
+
+/*
+ * Interrupt setup and service. Interrrupts on the mpc7448_hpc2 come
+ * from the four external INT pins, PCI interrupts are routed via
+ * PCI interrupt control registers, it generates internal IRQ23
+ *
+ * Interrupt routing on the Taiga Board:
+ * TSI108:PB_INT[0] -> CPU0:INT#
+ * TSI108:PB_INT[1] -> CPU0:MCP#
+ * TSI108:PB_INT[2] -> N/C
+ * TSI108:PB_INT[3] -> N/C
+ */
+static void __init mpc7448_hpc2_init_IRQ(void)
+{
+ struct mpic *mpic;
+ phys_addr_t mpic_paddr = 0;
+ struct device_node *tsi_pic;
+
+ tsi_pic = of_find_node_by_type(NULL, "open-pic");
+ if (tsi_pic) {
+ unsigned int size;
+ void *prop = get_property(tsi_pic, "reg", &size);
+ mpic_paddr = of_translate_address(tsi_pic, prop);
+ }
+
+ if (mpic_paddr == 0) {
+ printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
+ return;
+ }
+
+ DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__,
+ (u32) mpic_paddr);
+
+ mpic = mpic_alloc(mpic_paddr,
+ MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
+ MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108),
+ 0, /* num_sources used */
+ TSI108_IRQ_BASE,
+ 0, /* num_sources used */
+ NR_IRQS - 4 /* XXXX */,
+ mpc7448_hpc2_pic_initsenses,
+ sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC");
+
+ BUG_ON(mpic == NULL); /* XXXX */
+
+ mpic_init(mpic);
+ mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic);
+ tsi108_pci_int_init();
+
+ /* Configure MPIC outputs to CPU0 */
+ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
+}
+
+void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
+ seq_printf(m, "machine\t\t: MPC7448hpc2\n");
+}
+
+void mpc7448_hpc2_restart(char *cmd)
+{
+ local_irq_disable();
+
+ /* Set exception prefix high - to the firmware */
+ _nmask_and_or_msr(0, MSR_IP);
+
+ for (;;) ; /* Spin until reset happens */
+}
+
+void mpc7448_hpc2_power_off(void)
+{
+ local_irq_disable();
+ for (;;) ; /* No way to shut power off with software */
+}
+
+void mpc7448_hpc2_halt(void)
+{
+ mpc7448_hpc2_power_off();
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc7448_hpc2_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "mpc74xx"))
+ return 0;
+ return 1;
+}
+
+static int mpc7448_machine_check_exception(struct pt_regs *regs)
+{
+ extern void tsi108_clear_pci_cfg_error(void);
+ const struct exception_table_entry *entry;
+
+ /* Are we prepared to handle this fault */
+ if ((entry = search_exception_tables(regs->nip)) != NULL) {
+ tsi108_clear_pci_cfg_error();
+ regs->msr |= MSR_RI;
+ regs->nip = entry->fixup;
+ return 1;
+ }
+ return 0;
+
+}
+define_machine(mpc7448_hpc2){
+ .name = "MPC7448 HPC2",
+ .probe = mpc7448_hpc2_probe,
+ .setup_arch = mpc7448_hpc2_setup_arch,
+ .init_IRQ = mpc7448_hpc2_init_IRQ,
+ .show_cpuinfo = mpc7448_hpc2_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .pcibios_fixup = mpc7448_hpc2_pcibios_fixup,
+ .restart = mpc7448_hpc2_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .machine_check_exception= mpc7448_machine_check_exception,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h
new file mode 100644
index 00000000000..a543a5242e3
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h
@@ -0,0 +1,26 @@
+/*
+ * mpc7448_hpc2.h
+ *
+ * Definitions for Freescale MPC7448_HPC2 platform
+ *
+ * Author: Jacob Pan
+ * jacob.pan@freescale.com
+ * Maintainer: Roy Zang <roy.zang@freescale.com>
+ *
+ * 2006 (c) Freescale Semiconductor, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __PPC_PLATFORMS_MPC7448_HPC2_H
+#define __PPC_PLATFORMS_MPC7448_HPC2_H
+
+#include <asm/ppcboot.h>
+
+/* Base Addresses for the PCI bus
+ */
+#define MPC7448_HPC2_PCI_MEM_OFFSET (0x00000000)
+#define MPC7448_HPC2_ISA_IO_BASE (0x00000000)
+#define MPC7448_HPC2_ISA_MEM_BASE (0x00000000)
+#endif /* __PPC_PLATFORMS_MPC7448_HPC2_H */
diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c
index d3444aabe76..d194140c1eb 100644
--- a/arch/powerpc/platforms/iseries/dt.c
+++ b/arch/powerpc/platforms/iseries/dt.c
@@ -252,6 +252,7 @@ static void __init dt_model(struct iseries_flat_dt *dt)
{
char buf[16] = "IBM,";
+ /* N.B. lparcfg.c knows about the "IBM," prefixes ... */
/* "IBM," + mfgId[2:3] + systemSerial[1:5] */
strne2a(buf + 4, xItExtVpdPanel.mfgID + 2, 2);
strne2a(buf + 6, xItExtVpdPanel.systemSerial + 1, 5);
@@ -264,6 +265,7 @@ static void __init dt_model(struct iseries_flat_dt *dt)
dt_prop_str(dt, "model", buf);
dt_prop_str(dt, "compatible", "IBM,iSeries");
+ dt_prop_u32(dt, "ibm,partition-no", HvLpConfig_getLpIndex());
}
static void __init dt_do_vdevice(struct iseries_flat_dt *dt,
diff --git a/arch/powerpc/platforms/iseries/htab.c b/arch/powerpc/platforms/iseries/htab.c
index 30bdcf3925d..ed44dfceaa4 100644
--- a/arch/powerpc/platforms/iseries/htab.c
+++ b/arch/powerpc/platforms/iseries/htab.c
@@ -242,13 +242,11 @@ static void iSeries_hpte_invalidate(unsigned long slot, unsigned long va,
local_irq_restore(flags);
}
-void hpte_init_iSeries(void)
+void __init hpte_init_iSeries(void)
{
ppc_md.hpte_invalidate = iSeries_hpte_invalidate;
ppc_md.hpte_updatepp = iSeries_hpte_updatepp;
ppc_md.hpte_updateboltedpp = iSeries_hpte_updateboltedpp;
ppc_md.hpte_insert = iSeries_hpte_insert;
ppc_md.hpte_remove = iSeries_hpte_remove;
-
- htab_finish_init();
}
diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c
index 8ca7b939635..2a9f81ea27d 100644
--- a/arch/powerpc/platforms/iseries/lpevents.c
+++ b/arch/powerpc/platforms/iseries/lpevents.c
@@ -51,20 +51,21 @@ static unsigned lpEventHandlerPaths[HvLpEvent_Type_NumTypes];
static struct HvLpEvent * get_next_hvlpevent(void)
{
struct HvLpEvent * event;
- event = (struct HvLpEvent *)hvlpevent_queue.xSlicCurEventPtr;
+ event = (struct HvLpEvent *)hvlpevent_queue.hq_current_event;
if (hvlpevent_is_valid(event)) {
/* rmb() needed only for weakly consistent machines (regatta) */
rmb();
/* Set pointer to next potential event */
- hvlpevent_queue.xSlicCurEventPtr += ((event->xSizeMinus1 +
- LpEventAlign) / LpEventAlign) * LpEventAlign;
+ hvlpevent_queue.hq_current_event += ((event->xSizeMinus1 +
+ IT_LP_EVENT_ALIGN) / IT_LP_EVENT_ALIGN) *
+ IT_LP_EVENT_ALIGN;
/* Wrap to beginning if no room at end */
- if (hvlpevent_queue.xSlicCurEventPtr >
- hvlpevent_queue.xSlicLastValidEventPtr) {
- hvlpevent_queue.xSlicCurEventPtr =
- hvlpevent_queue.xSlicEventStackPtr;
+ if (hvlpevent_queue.hq_current_event >
+ hvlpevent_queue.hq_last_event) {
+ hvlpevent_queue.hq_current_event =
+ hvlpevent_queue.hq_event_stack;
}
} else {
event = NULL;
@@ -82,10 +83,10 @@ int hvlpevent_is_pending(void)
if (smp_processor_id() >= spread_lpevents)
return 0;
- next_event = (struct HvLpEvent *)hvlpevent_queue.xSlicCurEventPtr;
+ next_event = (struct HvLpEvent *)hvlpevent_queue.hq_current_event;
return hvlpevent_is_valid(next_event) ||
- hvlpevent_queue.xPlicOverflowIntPending;
+ hvlpevent_queue.hq_overflow_pending;
}
static void hvlpevent_clear_valid(struct HvLpEvent * event)
@@ -95,18 +96,18 @@ static void hvlpevent_clear_valid(struct HvLpEvent * event)
* ie. on 64-byte boundaries.
*/
struct HvLpEvent *tmp;
- unsigned extra = ((event->xSizeMinus1 + LpEventAlign) /
- LpEventAlign) - 1;
+ unsigned extra = ((event->xSizeMinus1 + IT_LP_EVENT_ALIGN) /
+ IT_LP_EVENT_ALIGN) - 1;
switch (extra) {
case 3:
- tmp = (struct HvLpEvent*)((char*)event + 3 * LpEventAlign);
+ tmp = (struct HvLpEvent*)((char*)event + 3 * IT_LP_EVENT_ALIGN);
hvlpevent_invalidate(tmp);
case 2:
- tmp = (struct HvLpEvent*)((char*)event + 2 * LpEventAlign);
+ tmp = (struct HvLpEvent*)((char*)event + 2 * IT_LP_EVENT_ALIGN);
hvlpevent_invalidate(tmp);
case 1:
- tmp = (struct HvLpEvent*)((char*)event + 1 * LpEventAlign);
+ tmp = (struct HvLpEvent*)((char*)event + 1 * IT_LP_EVENT_ALIGN);
hvlpevent_invalidate(tmp);
}
@@ -120,7 +121,7 @@ void process_hvlpevents(struct pt_regs *regs)
struct HvLpEvent * event;
/* If we have recursed, just return */
- if (!spin_trylock(&hvlpevent_queue.lock))
+ if (!spin_trylock(&hvlpevent_queue.hq_lock))
return;
for (;;) {
@@ -148,17 +149,17 @@ void process_hvlpevents(struct pt_regs *regs)
printk(KERN_INFO "Unexpected Lp Event type=%d\n", event->xType );
hvlpevent_clear_valid(event);
- } else if (hvlpevent_queue.xPlicOverflowIntPending)
+ } else if (hvlpevent_queue.hq_overflow_pending)
/*
* No more valid events. If overflow events are
* pending process them
*/
- HvCallEvent_getOverflowLpEvents(hvlpevent_queue.xIndex);
+ HvCallEvent_getOverflowLpEvents(hvlpevent_queue.hq_index);
else
break;
}
- spin_unlock(&hvlpevent_queue.lock);
+ spin_unlock(&hvlpevent_queue.hq_lock);
}
static int set_spread_lpevents(char *str)
@@ -184,20 +185,20 @@ void setup_hvlpevent_queue(void)
{
void *eventStack;
- spin_lock_init(&hvlpevent_queue.lock);
+ spin_lock_init(&hvlpevent_queue.hq_lock);
/* Allocate a page for the Event Stack. */
- eventStack = alloc_bootmem_pages(LpEventStackSize);
- memset(eventStack, 0, LpEventStackSize);
+ eventStack = alloc_bootmem_pages(IT_LP_EVENT_STACK_SIZE);
+ memset(eventStack, 0, IT_LP_EVENT_STACK_SIZE);
/* Invoke the hypervisor to initialize the event stack */
- HvCallEvent_setLpEventStack(0, eventStack, LpEventStackSize);
+ HvCallEvent_setLpEventStack(0, eventStack, IT_LP_EVENT_STACK_SIZE);
- hvlpevent_queue.xSlicEventStackPtr = (char *)eventStack;
- hvlpevent_queue.xSlicCurEventPtr = (char *)eventStack;
- hvlpevent_queue.xSlicLastValidEventPtr = (char *)eventStack +
- (LpEventStackSize - LpEventMaxSize);
- hvlpevent_queue.xIndex = 0;
+ hvlpevent_queue.hq_event_stack = eventStack;
+ hvlpevent_queue.hq_current_event = eventStack;
+ hvlpevent_queue.hq_last_event = (char *)eventStack +
+ (IT_LP_EVENT_STACK_SIZE - IT_LP_EVENT_MAX_SIZE);
+ hvlpevent_queue.hq_index = 0;
}
/* Register a handler for an LpEvent type */
diff --git a/arch/powerpc/platforms/iseries/proc.c b/arch/powerpc/platforms/iseries/proc.c
index e68b6b5fa89..c241413629a 100644
--- a/arch/powerpc/platforms/iseries/proc.c
+++ b/arch/powerpc/platforms/iseries/proc.c
@@ -24,7 +24,6 @@
#include <asm/processor.h>
#include <asm/time.h>
#include <asm/lppaca.h>
-#include <asm/iseries/it_lp_queue.h>
#include <asm/iseries/hv_call_xm.h>
#include "processor_vpd.h"
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 617c724c459..66c77e4f8ec 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -81,8 +81,6 @@ static void iSeries_pci_final_fixup(void) { }
#endif
extern int rd_size; /* Defined in drivers/block/rd.c */
-extern unsigned long embedded_sysmap_start;
-extern unsigned long embedded_sysmap_end;
extern unsigned long iSeries_recal_tb;
extern unsigned long iSeries_recal_titan;
@@ -321,11 +319,6 @@ static void __init iSeries_init_early(void)
iSeries_recal_titan = HvCallXm_loadTod();
/*
- * Initialize the hash table management pointers
- */
- hpte_init_iSeries();
-
- /*
* Initialize the DMA/TCE management
*/
iommu_init_early_iSeries();
@@ -563,16 +556,6 @@ static void __init iSeries_fixup_klimit(void)
if (naca.xRamDisk)
klimit = KERNELBASE + (u64)naca.xRamDisk +
(naca.xRamDiskSize * HW_PAGE_SIZE);
- else {
- /*
- * No ram disk was included - check and see if there
- * was an embedded system map. Change klimit to take
- * into account any embedded system map
- */
- if (embedded_sysmap_end)
- klimit = KERNELBASE + ((embedded_sysmap_end + 4095) &
- 0xfffffffffffff000);
- }
}
static int __init iSeries_src_init(void)
@@ -683,6 +666,8 @@ static int __init iseries_probe(void)
*/
virt_irq_max = 255;
+ hpte_init_iSeries();
+
return 1;
}
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index a0505ea48a8..4e32a5417fd 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -199,11 +199,6 @@ static void __init maple_init_early(void)
{
DBG(" -> maple_init_early\n");
- /* Initialize hash table, from now on, we can take hash faults
- * and call ioremap
- */
- hpte_init_native();
-
/* Setup interrupt mapping options */
ppc64_interrupt_controller = IC_OPEN_PIC;
@@ -272,6 +267,8 @@ static int __init maple_probe(void)
*/
alloc_dart_table();
+ hpte_init_native();
+
return 1;
}
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 9cc7db7a8bd..89c5775f83b 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -600,13 +600,6 @@ pmac_halt(void)
*/
static void __init pmac_init_early(void)
{
-#ifdef CONFIG_PPC64
- /* Initialize hash table, from now on, we can take hash faults
- * and call ioremap
- */
- hpte_init_native();
-#endif
-
/* Enable early btext debug if requested */
if (strstr(cmd_line, "btextdbg")) {
udbg_adb_init_early();
@@ -683,6 +676,8 @@ static int __init pmac_probe(void)
* part of the cacheable linar mapping
*/
alloc_dart_table();
+
+ hpte_init_native();
#endif
#ifdef CONFIG_PPC32
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index d03a8b078f9..8cfb5706790 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -92,6 +92,15 @@ static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
*(tcep++) = 0;
}
+static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
+{
+ u64 *tcep;
+
+ index <<= TCE_PAGE_FACTOR;
+ tcep = ((u64 *)tbl->it_base) + index;
+
+ return *tcep;
+}
static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
long npages, unsigned long uaddr,
@@ -235,6 +244,25 @@ static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long n
}
}
+static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum)
+{
+ u64 rc;
+ unsigned long tce_ret;
+
+ tcenum <<= TCE_PAGE_FACTOR;
+ rc = plpar_tce_get((u64)tbl->it_index, (u64)tcenum << 12, &tce_ret);
+
+ if (rc && printk_ratelimit()) {
+ printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%ld\n",
+ rc);
+ printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
+ printk("\ttcenum = 0x%lx\n", (u64)tcenum);
+ show_stack(current, (unsigned long *)__get_SP());
+ }
+
+ return tce_ret;
+}
+
static void iommu_table_setparms(struct pci_controller *phb,
struct device_node *dn,
struct iommu_table *tbl)
@@ -254,7 +282,10 @@ static void iommu_table_setparms(struct pci_controller *phb,
}
tbl->it_base = (unsigned long)__va(*basep);
+
+#ifndef CONFIG_CRASH_DUMP
memset((void *)tbl->it_base, 0, *sizep);
+#endif
tbl->it_busno = phb->bus->number;
@@ -560,11 +591,13 @@ void iommu_init_early_pSeries(void)
ppc_md.tce_build = tce_build_pSeriesLP;
ppc_md.tce_free = tce_free_pSeriesLP;
}
+ ppc_md.tce_get = tce_get_pSeriesLP;
ppc_md.iommu_bus_setup = iommu_bus_setup_pSeriesLP;
ppc_md.iommu_dev_setup = iommu_dev_setup_pSeriesLP;
} else {
ppc_md.tce_build = tce_build_pSeries;
ppc_md.tce_free = tce_free_pSeries;
+ ppc_md.tce_get = tce_get_pseries;
ppc_md.iommu_bus_setup = iommu_bus_setup_pSeries;
ppc_md.iommu_dev_setup = iommu_dev_setup_pSeries;
}
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 634b7d06d3c..27480705996 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -513,7 +513,7 @@ void pSeries_lpar_flush_hash_range(unsigned long number, int local)
spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags);
}
-void hpte_init_lpar(void)
+void __init hpte_init_lpar(void)
{
ppc_md.hpte_invalidate = pSeries_lpar_hpte_invalidate;
ppc_md.hpte_updatepp = pSeries_lpar_hpte_updatepp;
@@ -522,6 +522,4 @@ void hpte_init_lpar(void)
ppc_md.hpte_remove = pSeries_lpar_hpte_remove;
ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range;
ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear;
-
- htab_finish_init();
}
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 1e28518c612..b3197ff156c 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -322,11 +322,6 @@ static void __init pSeries_init_early(void)
DBG(" -> pSeries_init_early()\n");
fw_feature_init();
-
- if (firmware_has_feature(FW_FEATURE_LPAR))
- hpte_init_lpar();
- else
- hpte_init_native();
if (firmware_has_feature(FW_FEATURE_LPAR))
find_udbg_vterm();
@@ -384,6 +379,11 @@ static int __init pSeries_probe_hypertas(unsigned long node,
if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL)
powerpc_firmware_features |= FW_FEATURE_LPAR;
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ hpte_init_lpar();
+ else
+ hpte_init_native();
+
return 1;
}
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index cef95b02373..054bd8b41ef 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,3 +12,5 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_PPC_83xx) += ipic.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
+obj-$(CONFIG_PPC_TODC) += todc.o
+obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h
index c2d05763ccb..1c8817c4835 100644
--- a/arch/powerpc/sysdev/dart.h
+++ b/arch/powerpc/sysdev/dart.h
@@ -47,8 +47,12 @@
/* U4 registers */
#define DART_BASE_U4_BASE_MASK 0xffffff
#define DART_BASE_U4_BASE_SHIFT 0
-#define DART_CNTL_U4_FLUSHTLB 0x20000000
#define DART_CNTL_U4_ENABLE 0x80000000
+#define DART_CNTL_U4_IONE 0x40000000
+#define DART_CNTL_U4_FLUSHTLB 0x20000000
+#define DART_CNTL_U4_IDLE 0x10000000
+#define DART_CNTL_U4_PAR_EN 0x08000000
+#define DART_CNTL_U4_IONE_MASK 0x07ffffff
#define DART_SIZE_U4_SIZE_MASK 0x1fff
#define DART_SIZE_U4_SIZE_SHIFT 0
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 6232091cc72..7c7f34ce498 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -101,8 +101,8 @@ retry:
if (l == (1L << limit)) {
if (limit < 4) {
limit++;
- reg = DART_IN(DART_CNTL);
- reg &= ~inv_bit;
+ reg = DART_IN(DART_CNTL);
+ reg &= ~inv_bit;
DART_OUT(DART_CNTL, reg);
goto retry;
} else
@@ -111,11 +111,39 @@ retry:
}
}
+static inline void dart_tlb_invalidate_one(unsigned long bus_rpn)
+{
+ unsigned int reg;
+ unsigned int l, limit;
+
+ reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE |
+ (bus_rpn & DART_CNTL_U4_IONE_MASK);
+ DART_OUT(DART_CNTL, reg);
+
+ limit = 0;
+wait_more:
+ l = 0;
+ while ((DART_IN(DART_CNTL) & DART_CNTL_U4_IONE) && l < (1L << limit)) {
+ rmb();
+ l++;
+ }
+
+ if (l == (1L << limit)) {
+ if (limit < 4) {
+ limit++;
+ goto wait_more;
+ } else
+ panic("DART: TLB did not flush after waiting a long "
+ "time. Buggy U4 ?");
+ }
+}
+
static void dart_flush(struct iommu_table *tbl)
{
- if (dart_dirty)
+ if (dart_dirty) {
dart_tlb_invalidate_all();
- dart_dirty = 0;
+ dart_dirty = 0;
+ }
}
static void dart_build(struct iommu_table *tbl, long index,
@@ -124,6 +152,7 @@ static void dart_build(struct iommu_table *tbl, long index,
{
unsigned int *dp;
unsigned int rpn;
+ long l;
DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);
@@ -135,7 +164,8 @@ static void dart_build(struct iommu_table *tbl, long index,
/* On U3, all memory is contigous, so we can move this
* out of the loop.
*/
- while (npages--) {
+ l = npages;
+ while (l--) {
rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT;
*(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);
@@ -143,7 +173,14 @@ static void dart_build(struct iommu_table *tbl, long index,
uaddr += DART_PAGE_SIZE;
}
- dart_dirty = 1;
+ if (dart_is_u4) {
+ rpn = index;
+ mb(); /* make sure all updates have reached memory */
+ while (npages--)
+ dart_tlb_invalidate_one(rpn++);
+ } else {
+ dart_dirty = 1;
+ }
}
diff --git a/arch/powerpc/sysdev/todc.c b/arch/powerpc/sysdev/todc.c
new file mode 100644
index 00000000000..0a65980efb5
--- /dev/null
+++ b/arch/powerpc/sysdev/todc.c
@@ -0,0 +1,392 @@
+/*
+ * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818
+ * Real Time Clocks/Timekeepers.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/bcd.h>
+#include <linux/mc146818rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+
+/*
+ * Depending on the hardware on your board and your board design, the
+ * RTC/NVRAM may be accessed either directly (like normal memory) or via
+ * address/data registers. If your board uses the direct method, set
+ * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and
+ * 'nvram_as1' NULL. If your board uses address/data regs to access nvram,
+ * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the
+ * address of the upper byte (leave NULL if using mc146818), and set
+ * 'nvram_data' to the address of the 8-bit data register.
+ *
+ * Note: Even though the documentation for the various RTC chips say that it
+ * take up to a second before it starts updating once the 'R' bit is
+ * cleared, they always seem to update even though we bang on it many
+ * times a second. This is true, except for the Dallas Semi 1746/1747
+ * (possibly others). Those chips seem to have a real problem whenever
+ * we set the 'R' bit before reading them, they basically stop counting.
+ * --MAG
+ */
+
+/*
+ * 'todc_info' should be initialized in your *_setup.c file to
+ * point to a fully initialized 'todc_info_t' structure.
+ * This structure holds all the register offsets for your particular
+ * TODC/RTC chip.
+ * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you.
+ */
+
+#ifdef RTC_FREQ_SELECT
+#undef RTC_FREQ_SELECT
+#define RTC_FREQ_SELECT control_b /* Register A */
+#endif
+
+#ifdef RTC_CONTROL
+#undef RTC_CONTROL
+#define RTC_CONTROL control_a /* Register B */
+#endif
+
+#ifdef RTC_INTR_FLAGS
+#undef RTC_INTR_FLAGS
+#define RTC_INTR_FLAGS watchdog /* Register C */
+#endif
+
+#ifdef RTC_VALID
+#undef RTC_VALID
+#define RTC_VALID interrupts /* Register D */
+#endif
+
+/* Access routines when RTC accessed directly (like normal memory) */
+u_char
+todc_direct_read_val(int addr)
+{
+ return readb((void __iomem *)(todc_info->nvram_data + addr));
+}
+
+void
+todc_direct_write_val(int addr, unsigned char val)
+{
+ writeb(val, (void __iomem *)(todc_info->nvram_data + addr));
+ return;
+}
+
+/* Access routines for accessing m48txx type chips via addr/data regs */
+u_char
+todc_m48txx_read_val(int addr)
+{
+ outb(addr, todc_info->nvram_as0);
+ outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
+ return inb(todc_info->nvram_data);
+}
+
+void
+todc_m48txx_write_val(int addr, unsigned char val)
+{
+ outb(addr, todc_info->nvram_as0);
+ outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
+ outb(val, todc_info->nvram_data);
+ return;
+}
+
+/* Access routines for accessing mc146818 type chips via addr/data regs */
+u_char
+todc_mc146818_read_val(int addr)
+{
+ outb_p(addr, todc_info->nvram_as0);
+ return inb_p(todc_info->nvram_data);
+}
+
+void
+todc_mc146818_write_val(int addr, unsigned char val)
+{
+ outb_p(addr, todc_info->nvram_as0);
+ outb_p(val, todc_info->nvram_data);
+}
+
+
+/*
+ * Routines to make RTC chips with NVRAM buried behind an addr/data pair
+ * have the NVRAM and clock regs appear at the same level.
+ * The NVRAM will appear to start at addr 0 and the clock regs will appear
+ * to start immediately after the NVRAM (actually, start at offset
+ * todc_info->nvram_size).
+ */
+static inline u_char
+todc_read_val(int addr)
+{
+ u_char val;
+
+ if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
+ if (addr < todc_info->nvram_size) { /* NVRAM */
+ ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
+ val = ppc_md.rtc_read_val(todc_info->nvram_data_reg);
+ } else { /* Clock Reg */
+ addr -= todc_info->nvram_size;
+ val = ppc_md.rtc_read_val(addr);
+ }
+ } else
+ val = ppc_md.rtc_read_val(addr);
+
+ return val;
+}
+
+static inline void
+todc_write_val(int addr, u_char val)
+{
+ if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
+ if (addr < todc_info->nvram_size) { /* NVRAM */
+ ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
+ ppc_md.rtc_write_val(todc_info->nvram_data_reg, val);
+ } else { /* Clock Reg */
+ addr -= todc_info->nvram_size;
+ ppc_md.rtc_write_val(addr, val);
+ }
+ } else
+ ppc_md.rtc_write_val(addr, val);
+}
+
+/*
+ * TODC routines
+ *
+ * There is some ugly stuff in that there are assumptions for the mc146818.
+ *
+ * Assumptions:
+ * - todc_info->control_a has the offset as mc146818 Register B reg
+ * - todc_info->control_b has the offset as mc146818 Register A reg
+ * - m48txx control reg's write enable or 'W' bit is same as
+ * mc146818 Register B 'SET' bit (i.e., 0x80)
+ *
+ * These assumptions were made to make the code simpler.
+ */
+long __init
+todc_time_init(void)
+{
+ u_char cntl_b;
+
+ if (!ppc_md.rtc_read_val)
+ ppc_md.rtc_read_val = ppc_md.nvram_read_val;
+ if (!ppc_md.rtc_write_val)
+ ppc_md.rtc_write_val = ppc_md.nvram_write_val;
+
+ cntl_b = todc_read_val(todc_info->control_b);
+
+ if (todc_info->rtc_type == TODC_TYPE_MC146818) {
+ if ((cntl_b & 0x70) != 0x20) {
+ printk(KERN_INFO "TODC real-time-clock was stopped."
+ " Now starting...");
+ cntl_b &= ~0x70;
+ cntl_b |= 0x20;
+ }
+
+ todc_write_val(todc_info->control_b, cntl_b);
+ } else if (todc_info->rtc_type == TODC_TYPE_DS17285) {
+ u_char mode;
+
+ mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A);
+ /* Make sure countdown clear is not set */
+ mode &= ~0x40;
+ /* Enable oscillator, extended register set */
+ mode |= 0x30;
+ todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode);
+
+ } else if (todc_info->rtc_type == TODC_TYPE_DS1501) {
+ u_char month;
+
+ todc_info->enable_read = TODC_DS1501_CNTL_B_TE;
+ todc_info->enable_write = TODC_DS1501_CNTL_B_TE;
+
+ month = todc_read_val(todc_info->month);
+
+ if ((month & 0x80) == 0x80) {
+ printk(KERN_INFO "TODC %s %s\n",
+ "real-time-clock was stopped.",
+ "Now starting...");
+ month &= ~0x80;
+ todc_write_val(todc_info->month, month);
+ }
+
+ cntl_b &= ~TODC_DS1501_CNTL_B_TE;
+ todc_write_val(todc_info->control_b, cntl_b);
+ } else { /* must be a m48txx type */
+ u_char cntl_a;
+
+ todc_info->enable_read = TODC_MK48TXX_CNTL_A_R;
+ todc_info->enable_write = TODC_MK48TXX_CNTL_A_W;
+
+ cntl_a = todc_read_val(todc_info->control_a);
+
+ /* Check & clear STOP bit in control B register */
+ if (cntl_b & TODC_MK48TXX_DAY_CB) {
+ printk(KERN_INFO "TODC %s %s\n",
+ "real-time-clock was stopped.",
+ "Now starting...");
+
+ cntl_a |= todc_info->enable_write;
+ cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */
+
+ todc_write_val(todc_info->control_a, cntl_a);
+ todc_write_val(todc_info->control_b, cntl_b);
+ }
+
+ /* Make sure READ & WRITE bits are cleared. */
+ cntl_a &= ~(todc_info->enable_write | todc_info->enable_read);
+ todc_write_val(todc_info->control_a, cntl_a);
+ }
+
+ return 0;
+}
+
+/*
+ * There is some ugly stuff in that there are assumptions that for a mc146818,
+ * the todc_info->control_a has the offset of the mc146818 Register B reg and
+ * that the register'ss 'SET' bit is the same as the m48txx's write enable
+ * bit in the control register of the m48txx (i.e., 0x80).
+ *
+ * It was done to make the code look simpler.
+ */
+void
+todc_get_rtc_time(struct rtc_time *tm)
+{
+ uint year = 0, mon = 0, mday = 0, hour = 0, min = 0, sec = 0;
+ uint limit, i;
+ u_char save_control, uip = 0;
+ extern void GregorianDay(struct rtc_time *);
+
+ spin_lock(&rtc_lock);
+ save_control = todc_read_val(todc_info->control_a);
+
+ if (todc_info->rtc_type != TODC_TYPE_MC146818) {
+ limit = 1;
+
+ switch (todc_info->rtc_type) {
+ case TODC_TYPE_DS1553:
+ case TODC_TYPE_DS1557:
+ case TODC_TYPE_DS1743:
+ case TODC_TYPE_DS1746: /* XXXX BAD HACK -> FIX */
+ case TODC_TYPE_DS1747:
+ case TODC_TYPE_DS17285:
+ break;
+ default:
+ todc_write_val(todc_info->control_a,
+ (save_control | todc_info->enable_read));
+ }
+ } else
+ limit = 100000000;
+
+ for (i=0; i<limit; i++) {
+ if (todc_info->rtc_type == TODC_TYPE_MC146818)
+ uip = todc_read_val(todc_info->RTC_FREQ_SELECT);
+
+ sec = todc_read_val(todc_info->seconds) & 0x7f;
+ min = todc_read_val(todc_info->minutes) & 0x7f;
+ hour = todc_read_val(todc_info->hours) & 0x3f;
+ mday = todc_read_val(todc_info->day_of_month) & 0x3f;
+ mon = todc_read_val(todc_info->month) & 0x1f;
+ year = todc_read_val(todc_info->year) & 0xff;
+
+ if (todc_info->rtc_type == TODC_TYPE_MC146818) {
+ uip |= todc_read_val(todc_info->RTC_FREQ_SELECT);
+ if ((uip & RTC_UIP) == 0)
+ break;
+ }
+ }
+
+ if (todc_info->rtc_type != TODC_TYPE_MC146818) {
+ switch (todc_info->rtc_type) {
+ case TODC_TYPE_DS1553:
+ case TODC_TYPE_DS1557:
+ case TODC_TYPE_DS1743:
+ case TODC_TYPE_DS1746: /* XXXX BAD HACK -> FIX */
+ case TODC_TYPE_DS1747:
+ case TODC_TYPE_DS17285:
+ break;
+ default:
+ save_control &= ~(todc_info->enable_read);
+ todc_write_val(todc_info->control_a, save_control);
+ }
+ }
+ spin_unlock(&rtc_lock);
+
+ if ((todc_info->rtc_type != TODC_TYPE_MC146818)
+ || ((save_control & RTC_DM_BINARY) == 0)
+ || RTC_ALWAYS_BCD) {
+ BCD_TO_BIN(sec);
+ BCD_TO_BIN(min);
+ BCD_TO_BIN(hour);
+ BCD_TO_BIN(mday);
+ BCD_TO_BIN(mon);
+ BCD_TO_BIN(year);
+ }
+
+ if ((year + 1900) < 1970) {
+ year += 100;
+ }
+
+ tm->tm_sec = sec;
+ tm->tm_min = min;
+ tm->tm_hour = hour;
+ tm->tm_mday = mday;
+ tm->tm_mon = mon;
+ tm->tm_year = year;
+
+ GregorianDay(tm);
+}
+
+int
+todc_set_rtc_time(struct rtc_time *tm)
+{
+ u_char save_control, save_freq_select = 0;
+
+ spin_lock(&rtc_lock);
+ save_control = todc_read_val(todc_info->control_a);
+
+ /* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */
+ todc_write_val(todc_info->control_a,
+ (save_control | todc_info->enable_write));
+ save_control &= ~(todc_info->enable_write); /* in case it was set */
+
+ if (todc_info->rtc_type == TODC_TYPE_MC146818) {
+ save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT);
+ todc_write_val(todc_info->RTC_FREQ_SELECT,
+ save_freq_select | RTC_DIV_RESET2);
+ }
+
+ if ((todc_info->rtc_type != TODC_TYPE_MC146818)
+ || ((save_control & RTC_DM_BINARY) == 0)
+ || RTC_ALWAYS_BCD) {
+ BIN_TO_BCD(tm->tm_sec);
+ BIN_TO_BCD(tm->tm_min);
+ BIN_TO_BCD(tm->tm_hour);
+ BIN_TO_BCD(tm->tm_mon);
+ BIN_TO_BCD(tm->tm_mday);
+ BIN_TO_BCD(tm->tm_year);
+ }
+
+ todc_write_val(todc_info->seconds, tm->tm_sec);
+ todc_write_val(todc_info->minutes, tm->tm_min);
+ todc_write_val(todc_info->hours, tm->tm_hour);
+ todc_write_val(todc_info->month, tm->tm_mon);
+ todc_write_val(todc_info->day_of_month, tm->tm_mday);
+ todc_write_val(todc_info->year, tm->tm_year);
+
+ todc_write_val(todc_info->control_a, save_control);
+
+ if (todc_info->rtc_type == TODC_TYPE_MC146818)
+ todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select);
+
+ spin_unlock(&rtc_lock);
+ return 0;
+}
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
new file mode 100644
index 00000000000..26a0cc820cd
--- /dev/null
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -0,0 +1,145 @@
+/*
+ * tsi108/109 device setup code
+ *
+ * Maintained by Roy Zang < tie-fei.zang@freescale.com >
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/major.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/tsi108.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
+static phys_addr_t tsi108_csr_base = -1;
+
+phys_addr_t get_csrbase(void)
+{
+ struct device_node *tsi;
+
+ if (tsi108_csr_base != -1)
+ return tsi108_csr_base;
+
+ tsi = of_find_node_by_type(NULL, "tsi-bridge");
+ if (tsi) {
+ unsigned int size;
+ void *prop = get_property(tsi, "reg", &size);
+ tsi108_csr_base = of_translate_address(tsi, prop);
+ of_node_put(tsi);
+ };
+ return tsi108_csr_base;
+}
+
+u32 get_vir_csrbase(void)
+{
+ return (u32) (ioremap(get_csrbase(), 0x10000));
+}
+
+EXPORT_SYMBOL(get_csrbase);
+EXPORT_SYMBOL(get_vir_csrbase);
+
+static int __init tsi108_eth_of_init(void)
+{
+ struct device_node *np;
+ unsigned int i;
+ struct platform_device *tsi_eth_dev;
+ struct resource res;
+ int ret;
+
+ for (np = NULL, i = 0;
+ (np = of_find_compatible_node(np, "network", "tsi-ethernet")) != NULL;
+ i++) {
+ struct resource r[2];
+ struct device_node *phy;
+ hw_info tsi_eth_data;
+ unsigned int *id;
+ unsigned int *phy_id;
+ void *mac_addr;
+ phandle *ph;
+
+ memset(r, 0, sizeof(r));
+ memset(&tsi_eth_data, 0, sizeof(tsi_eth_data));
+
+ ret = of_address_to_resource(np, 0, &r[0]);
+ DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
+ __FUNCTION__,r[0].name, r[0].start, r[0].end);
+ if (ret)
+ goto err;
+
+ r[1].name = "tx";
+ r[1].start = np->intrs[0].line;
+ r[1].end = np->intrs[0].line;
+ r[1].flags = IORESOURCE_IRQ;
+
+ tsi_eth_dev =
+ platform_device_register_simple("tsi-ethernet", i, &r[0],
+ np->n_intrs + 1);
+
+ if (IS_ERR(tsi_eth_dev)) {
+ ret = PTR_ERR(tsi_eth_dev);
+ goto err;
+ }
+
+ mac_addr = get_property(np, "address", NULL);
+ memcpy(tsi_eth_data.mac_addr, mac_addr, 6);
+
+ ph = (phandle *) get_property(np, "phy-handle", NULL);
+ phy = of_find_node_by_phandle(*ph);
+
+ if (phy == NULL) {
+ ret = -ENODEV;
+ goto unreg;
+ }
+
+ id = (u32 *) get_property(phy, "reg", NULL);
+ phy_id = (u32 *) get_property(phy, "phy-id", NULL);
+ ret = of_address_to_resource(phy, 0, &res);
+ if (ret) {
+ of_node_put(phy);
+ goto unreg;
+ }
+ tsi_eth_data.regs = r[0].start;
+ tsi_eth_data.phyregs = res.start;
+ tsi_eth_data.phy = *phy_id;
+ tsi_eth_data.irq_num = np->intrs[0].line;
+ of_node_put(phy);
+ ret =
+ platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
+ sizeof(hw_info));
+ if (ret)
+ goto unreg;
+ }
+ return 0;
+unreg:
+ platform_device_unregister(tsi_eth_dev);
+err:
+ return ret;
+}
+
+arch_initcall(tsi108_eth_of_init);
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
new file mode 100644
index 00000000000..3265d54c82e
--- /dev/null
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -0,0 +1,412 @@
+/*
+ * Common routines for Tundra Semiconductor TSI108 host bridge.
+ *
+ * 2004-2005 (c) Tundra Semiconductor Corp.
+ * Author: Alex Bounine (alexandreb@tundra.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/tsi108.h>
+#include <asm/tsi108_irq.h>
+#include <asm/prom.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define tsi_mk_config_addr(bus, devfunc, offset) \
+ ((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base)
+
+u32 tsi108_pci_cfg_base;
+u32 tsi108_csr_vir_base;
+
+extern u32 get_vir_csrbase(void);
+extern u32 tsi108_read_reg(u32 reg_offset);
+extern void tsi108_write_reg(u32 reg_offset, u32 val);
+
+int
+tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
+ int offset, int len, u32 val)
+{
+ volatile unsigned char *cfg_addr;
+
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(bus->number, devfunc))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
+ devfunc, offset) |
+ (offset & 0x03));
+
+#ifdef DEBUG
+ printk("PCI CFG write : ");
+ printk("%d:0x%x:0x%x ", bus->number, devfunc, offset);
+ printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
+ printk("data = 0x%08x\n", val);
+#endif
+
+ switch (len) {
+ case 1:
+ out_8((u8 *) cfg_addr, val);
+ break;
+ case 2:
+ out_le16((u16 *) cfg_addr, val);
+ break;
+ default:
+ out_le32((u32 *) cfg_addr, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+void tsi108_clear_pci_error(u32 pci_cfg_base)
+{
+ u32 err_stat, err_addr, pci_stat;
+
+ /*
+ * Quietly clear PB and PCI error flags set as result
+ * of PCI/X configuration read requests.
+ */
+
+ /* Read PB Error Log Registers */
+
+ err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS);
+ err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR);
+
+ if (err_stat & TSI108_PB_ERRCS_ES) {
+ /* Clear error flag */
+ tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS,
+ TSI108_PB_ERRCS_ES);
+
+ /* Clear read error reported in PB_ISR */
+ tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR,
+ TSI108_PB_ISR_PBS_RD_ERR);
+
+ /* Clear PCI/X bus cfg errors if applicable */
+ if ((err_addr & 0xFF000000) == pci_cfg_base) {
+ pci_stat =
+ tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR);
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR,
+ pci_stat);
+ }
+ }
+
+ return;
+}
+
+#define __tsi108_read_pci_config(x, addr, op) \
+ __asm__ __volatile__( \
+ " "op" %0,0,%1\n" \
+ "1: eieio\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,-1\n" \
+ " b 2b\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".text" \
+ : "=r"(x) : "r"(addr))
+
+int
+tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 * val)
+{
+ volatile unsigned char *cfg_addr;
+ u32 temp;
+
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(bus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
+ devfn,
+ offset) | (offset &
+ 0x03));
+
+ switch (len) {
+ case 1:
+ __tsi108_read_pci_config(temp, cfg_addr, "lbzx");
+ break;
+ case 2:
+ __tsi108_read_pci_config(temp, cfg_addr, "lhbrx");
+ break;
+ default:
+ __tsi108_read_pci_config(temp, cfg_addr, "lwbrx");
+ break;
+ }
+
+ *val = temp;
+
+#ifdef DEBUG
+ if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) {
+ printk("PCI CFG read : ");
+ printk("%d:0x%x:0x%x ", bus->number, devfn, offset);
+ printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
+ printk("data = 0x%x\n", *val);
+ }
+#endif
+ return PCIBIOS_SUCCESSFUL;
+}
+
+void tsi108_clear_pci_cfg_error(void)
+{
+ tsi108_clear_pci_error(TSI108_PCI_CFG_BASE_PHYS);
+}
+
+static struct pci_ops tsi108_direct_pci_ops = {
+ tsi108_direct_read_config,
+ tsi108_direct_write_config
+};
+
+int __init tsi108_setup_pci(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ struct resource rsrc;
+ int *bus_range;
+ int primary = 0, has_address = 0;
+
+ /* PCI Config mapping */
+ tsi108_pci_cfg_base = (u32)ioremap(TSI108_PCI_CFG_BASE_PHYS,
+ TSI108_PCI_CFG_SIZE);
+ DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__,
+ tsi108_pci_cfg_base);
+
+ /* Fetch host bridge registers address */
+ has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+ /* Get bus range if any */
+ bus_range = (int *)get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
+ " bus 0\n", dev->full_name);
+ }
+
+ hose = pcibios_alloc_controller();
+
+ if (!hose) {
+ printk("PCI Host bridge init failed\n");
+ return -ENOMEM;
+ }
+ hose->arch_data = dev;
+ hose->set_cfg_type = 1;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ (hose)->ops = &tsi108_direct_pci_ops;
+
+ printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. "
+ "Firmware bus number: %d->%d\n",
+ rsrc.start, hose->first_busno, hose->last_busno);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, primary);
+ return 0;
+}
+
+/*
+ * Low level utility functions
+ */
+
+static void tsi108_pci_int_mask(u_int irq)
+{
+ u_int irp_cfg;
+ int int_line = (irq - IRQ_PCI_INTAD_BASE);
+
+ irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+ mb();
+ irp_cfg |= (1 << int_line); /* INTx_DIR = output */
+ irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
+ mb();
+ irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+}
+
+static void tsi108_pci_int_unmask(u_int irq)
+{
+ u_int irp_cfg;
+ int int_line = (irq - IRQ_PCI_INTAD_BASE);
+
+ irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+ mb();
+ irp_cfg &= ~(1 << int_line);
+ irp_cfg |= (3 << (8 + (int_line * 2)));
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
+ mb();
+}
+
+static void init_pci_source(void)
+{
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL,
+ 0x0000ff00);
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
+ TSI108_PCI_IRP_ENABLE_P_INT);
+ mb();
+}
+
+static inline int get_pci_source(void)
+{
+ u_int temp = 0;
+ int irq = -1;
+ int i;
+ u_int pci_irp_stat;
+ static int mask = 0;
+
+ /* Read PCI/X block interrupt status register */
+ pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
+ mb();
+
+ if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) {
+ /* Process Interrupt from PCI bus INTA# - INTD# lines */
+ temp =
+ tsi108_read_reg(TSI108_PCI_OFFSET +
+ TSI108_PCI_IRP_INTAD) & 0xf;
+ mb();
+ for (i = 0; i < 4; i++, mask++) {
+ if (temp & (1 << mask % 4)) {
+ irq = IRQ_PCI_INTA + mask % 4;
+ mask++;
+ break;
+ }
+ }
+
+ /* Disable interrupts from PCI block */
+ temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
+ temp & ~TSI108_PCI_IRP_ENABLE_P_INT);
+ mb();
+ (void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
+ mb();
+ }
+#ifdef DEBUG
+ else {
+ printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
+ pci_irp_stat =
+ tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
+ temp =
+ tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD);
+ mb();
+ printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
+ temp =
+ tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+ mb();
+ printk("cfg_ctl=0x%08x ", temp);
+ temp =
+ tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
+ mb();
+ printk("irp_enable=0x%08x\n", temp);
+ }
+#endif /* end of DEBUG */
+
+ return irq;
+}
+
+
+/*
+ * Linux descriptor level callbacks
+ */
+
+static void tsi108_pci_irq_enable(u_int irq)
+{
+ tsi108_pci_int_unmask(irq);
+}
+
+static void tsi108_pci_irq_disable(u_int irq)
+{
+ tsi108_pci_int_mask(irq);
+}
+
+static void tsi108_pci_irq_ack(u_int irq)
+{
+ tsi108_pci_int_mask(irq);
+}
+
+static void tsi108_pci_irq_end(u_int irq)
+{
+ tsi108_pci_int_unmask(irq);
+
+ /* Enable interrupts from PCI block */
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
+ tsi108_read_reg(TSI108_PCI_OFFSET +
+ TSI108_PCI_IRP_ENABLE) |
+ TSI108_PCI_IRP_ENABLE_P_INT);
+ mb();
+}
+
+/*
+ * Interrupt controller descriptor for cascaded PCI interrupt controller.
+ */
+
+struct hw_interrupt_type tsi108_pci_irq = {
+ .typename = "tsi108_PCI_int",
+ .enable = tsi108_pci_irq_enable,
+ .disable = tsi108_pci_irq_disable,
+ .ack = tsi108_pci_irq_ack,
+ .end = tsi108_pci_irq_end,
+};
+
+/*
+ * Exported functions
+ */
+
+/*
+ * The Tsi108 PCI interrupts initialization routine.
+ *
+ * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block
+ * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the
+ * PCI block has to be treated as a cascaded interrupt controller connected
+ * to the MPIC.
+ */
+
+void __init tsi108_pci_int_init(void)
+{
+ u_int i;
+
+ DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
+
+ for (i = 0; i < NUM_PCI_IRQS; i++) {
+ irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq;
+ irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
+ }
+
+ init_pci_source();
+}
+
+int tsi108_irq_cascade(struct pt_regs *regs, void *unused)
+{
+ return get_pci_source();
+}
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index d633081fa4c..d1266fe2d1a 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -774,11 +774,18 @@ config BLK_DEV_IDEDMA_PMAC
performance.
config BLK_DEV_IDE_PMAC_BLINK
- bool "Blink laptop LED on drive activity"
+ bool "Blink laptop LED on drive activity (DEPRECATED)"
depends on BLK_DEV_IDE_PMAC && ADB_PMU
+ select ADB_PMU_LED
+ select LEDS_TRIGGERS
+ select LEDS_TRIGGER_IDE_DISK
help
This option enables the use of the sleep LED as a hard drive
activity LED.
+ This option is deprecated, it only selects ADB_PMU_LED and
+ LEDS_TRIGGER_IDE_DISK and changes the code in the new led class
+ device to default to the ide-disk trigger (which should be set
+ from userspace via sysfs).
config BLK_DEV_IDE_SWARM
tristate "IDE for Sibyte evaluation boards"
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index ffca8b63ee7..e8ef3455ec3 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -421,107 +421,6 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
/*
- * Below is the code for blinking the laptop LED along with hard
- * disk activity.
- */
-
-#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
-
-/* Set to 50ms minimum led-on time (also used to limit frequency
- * of requests sent to the PMU
- */
-#define PMU_HD_BLINK_TIME (HZ/50)
-
-static struct adb_request pmu_blink_on, pmu_blink_off;
-static spinlock_t pmu_blink_lock;
-static unsigned long pmu_blink_stoptime;
-static int pmu_blink_ledstate;
-static struct timer_list pmu_blink_timer;
-static int pmu_ide_blink_enabled;
-
-
-static void
-pmu_hd_blink_timeout(unsigned long data)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pmu_blink_lock, flags);
-
- /* We may have been triggered again in a racy way, check
- * that we really want to switch it off
- */
- if (time_after(pmu_blink_stoptime, jiffies))
- goto done;
-
- /* Previous req. not complete, try 100ms more */
- if (pmu_blink_off.complete == 0)
- mod_timer(&pmu_blink_timer, jiffies + PMU_HD_BLINK_TIME);
- else if (pmu_blink_ledstate) {
- pmu_request(&pmu_blink_off, NULL, 4, 0xee, 4, 0, 0);
- pmu_blink_ledstate = 0;
- }
-done:
- spin_unlock_irqrestore(&pmu_blink_lock, flags);
-}
-
-static void
-pmu_hd_kick_blink(void *data, int rw)
-{
- unsigned long flags;
-
- pmu_blink_stoptime = jiffies + PMU_HD_BLINK_TIME;
- wmb();
- mod_timer(&pmu_blink_timer, pmu_blink_stoptime);
- /* Fast path when LED is already ON */
- if (pmu_blink_ledstate == 1)
- return;
- spin_lock_irqsave(&pmu_blink_lock, flags);
- if (pmu_blink_on.complete && !pmu_blink_ledstate) {
- pmu_request(&pmu_blink_on, NULL, 4, 0xee, 4, 0, 1);
- pmu_blink_ledstate = 1;
- }
- spin_unlock_irqrestore(&pmu_blink_lock, flags);
-}
-
-static int
-pmu_hd_blink_init(void)
-{
- struct device_node *dt;
- const char *model;
-
- /* Currently, I only enable this feature on KeyLargo based laptops,
- * older laptops may support it (at least heathrow/paddington) but
- * I don't feel like loading those venerable old machines with so
- * much additional interrupt & PMU activity...
- */
- if (pmu_get_model() != PMU_KEYLARGO_BASED)
- return 0;
-
- dt = of_find_node_by_path("/");
- if (dt == NULL)
- return 0;
- model = (const char *)get_property(dt, "model", NULL);
- if (model == NULL)
- return 0;
- if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 &&
- strncmp(model, "iBook", strlen("iBook")) != 0) {
- of_node_put(dt);
- return 0;
- }
- of_node_put(dt);
-
- pmu_blink_on.complete = 1;
- pmu_blink_off.complete = 1;
- spin_lock_init(&pmu_blink_lock);
- init_timer(&pmu_blink_timer);
- pmu_blink_timer.function = pmu_hd_blink_timeout;
-
- return 1;
-}
-
-#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */
-
-/*
* N.B. this can't be an initfunc, because the media-bay task can
* call ide_[un]register at any time.
*/
@@ -1192,23 +1091,6 @@ pmac_ide_do_suspend(ide_hwif_t *hwif)
pmif->timings[0] = 0;
pmif->timings[1] = 0;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
- /* Note: This code will be called for every hwif, thus we'll
- * try several time to stop the LED blinker timer, but that
- * should be harmless
- */
- if (pmu_ide_blink_enabled) {
- unsigned long flags;
-
- /* Make sure we don't hit the PMU blink */
- spin_lock_irqsave(&pmu_blink_lock, flags);
- if (pmu_blink_ledstate)
- del_timer(&pmu_blink_timer);
- pmu_blink_ledstate = 0;
- spin_unlock_irqrestore(&pmu_blink_lock, flags);
- }
-#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */
-
disable_irq(pmif->irq);
/* The media bay will handle itself just fine */
@@ -1376,13 +1258,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->selectproc = pmac_ide_selectproc;
hwif->speedproc = pmac_ide_tune_chipset;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
- pmu_ide_blink_enabled = pmu_hd_blink_init();
-
- if (pmu_ide_blink_enabled)
- hwif->led_act = pmu_hd_kick_blink;
-#endif
-
printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
pmif->mediabay ? " (mediabay)" : "", hwif->irq);
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 37cd6ee4586..54f3f6b94ef 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -78,6 +78,18 @@ config ADB_PMU
this device; you should do so if your machine is one of those
mentioned above.
+config ADB_PMU_LED
+ bool "Support for the Power/iBook front LED"
+ depends on ADB_PMU
+ select NEW_LEDS
+ select LEDS_CLASS
+ help
+ Support the front LED on Power/iBooks as a generic LED that can
+ be triggered by any of the supported triggers. To get the
+ behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
+ and the ide-disk LED trigger and configure appropriately through
+ sysfs.
+
config PMAC_SMU
bool "Support for SMU based PowerMacs"
depends on PPC_PMAC64
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index 45a268f8047..b53d45f87b0 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_INPUT_ADBHID) += adbhid.o
obj-$(CONFIG_ANSLCD) += ans-lcd.o
obj-$(CONFIG_ADB_PMU) += via-pmu.o via-pmu-event.o
+obj-$(CONFIG_ADB_PMU_LED) += via-pmu-led.o
obj-$(CONFIG_PMAC_BACKLIGHT) += via-pmu-backlight.o
obj-$(CONFIG_ADB_CUDA) += via-cuda.o
obj-$(CONFIG_PMAC_APM_EMU) += apm_emu.o
diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c
new file mode 100644
index 00000000000..af8375ed0f5
--- /dev/null
+++ b/drivers/macintosh/via-pmu-led.c
@@ -0,0 +1,144 @@
+/*
+ * via-pmu LED class device
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/leds.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <asm/prom.h>
+
+static spinlock_t pmu_blink_lock;
+static struct adb_request pmu_blink_req;
+/* -1: no change, 0: request off, 1: request on */
+static int requested_change;
+static int sleeping;
+
+static void pmu_req_done(struct adb_request * req)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_blink_lock, flags);
+ /* if someone requested a change in the meantime
+ * (we only see the last one which is fine)
+ * then apply it now */
+ if (requested_change != -1 && !sleeping)
+ pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change);
+ /* reset requested change */
+ requested_change = -1;
+ spin_unlock_irqrestore(&pmu_blink_lock, flags);
+}
+
+static void pmu_led_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_blink_lock, flags);
+ switch (brightness) {
+ case LED_OFF:
+ requested_change = 0;
+ break;
+ case LED_FULL:
+ requested_change = 1;
+ break;
+ default:
+ goto out;
+ break;
+ }
+ /* if request isn't done, then don't do anything */
+ if (pmu_blink_req.complete && !sleeping)
+ pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change);
+ out:
+ spin_unlock_irqrestore(&pmu_blink_lock, flags);
+}
+
+static struct led_classdev pmu_led = {
+ .name = "pmu-front-led",
+#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
+ .default_trigger = "ide-disk",
+#endif
+ .brightness_set = pmu_led_set,
+};
+
+#ifdef CONFIG_PM
+static int pmu_led_sleep_call(struct pmu_sleep_notifier *self, int when)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_blink_lock, flags);
+
+ switch (when) {
+ case PBOOK_SLEEP_REQUEST:
+ sleeping = 1;
+ break;
+ case PBOOK_WAKE:
+ sleeping = 0;
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ spin_unlock_irqrestore(&pmu_blink_lock, flags);
+
+ return PBOOK_SLEEP_OK;
+}
+
+static struct pmu_sleep_notifier via_pmu_led_sleep_notif = {
+ .notifier_call = pmu_led_sleep_call,
+};
+#endif
+
+static int __init via_pmu_led_init(void)
+{
+ struct device_node *dt;
+ const char *model;
+
+ /* only do this on keylargo based models */
+ if (pmu_get_model() != PMU_KEYLARGO_BASED)
+ return -ENODEV;
+
+ dt = of_find_node_by_path("/");
+ if (dt == NULL)
+ return -ENODEV;
+ model = (const char *)get_property(dt, "model", NULL);
+ if (model == NULL)
+ return -ENODEV;
+ if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 &&
+ strncmp(model, "iBook", strlen("iBook")) != 0) {
+ of_node_put(dt);
+ /* ignore */
+ return -ENODEV;
+ }
+ of_node_put(dt);
+
+ spin_lock_init(&pmu_blink_lock);
+ /* no outstanding req */
+ pmu_blink_req.complete = 1;
+ pmu_blink_req.done = pmu_req_done;
+#ifdef CONFIG_PM
+ pmu_register_sleep_notifier(&via_pmu_led_sleep_notif);
+#endif
+ return led_classdev_register(NULL, &pmu_led);
+}
+
+late_initcall(via_pmu_led_init);
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index fab41c280aa..1ba3c998361 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -117,38 +117,30 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
#define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000)
#define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000)
+/*
+ * Add the 64-bit processor unique features in the top half of the word;
+ * on 32-bit, make the names available but defined to be 0.
+ */
#ifdef __powerpc64__
-/* Add the 64b processor unique features in the top half of the word */
-#define CPU_FTR_SLB ASM_CONST(0x0000000100000000)
-#define CPU_FTR_16M_PAGE ASM_CONST(0x0000000200000000)
-#define CPU_FTR_TLBIEL ASM_CONST(0x0000000400000000)
-#define CPU_FTR_NOEXECUTE ASM_CONST(0x0000000800000000)
-#define CPU_FTR_IABR ASM_CONST(0x0000002000000000)
-#define CPU_FTR_MMCRA ASM_CONST(0x0000004000000000)
-#define CPU_FTR_CTRL ASM_CONST(0x0000008000000000)
-#define CPU_FTR_SMT ASM_CONST(0x0000010000000000)
-#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0000020000000000)
-#define CPU_FTR_LOCKLESS_TLBIE ASM_CONST(0x0000040000000000)
-#define CPU_FTR_CI_LARGE_PAGE ASM_CONST(0x0000100000000000)
-#define CPU_FTR_PAUSE_ZERO ASM_CONST(0x0000200000000000)
-#define CPU_FTR_PURR ASM_CONST(0x0000400000000000)
+#define LONG_ASM_CONST(x) ASM_CONST(x)
#else
-/* ensure on 32b processors the flags are available for compiling but
- * don't do anything */
-#define CPU_FTR_SLB ASM_CONST(0x0)
-#define CPU_FTR_16M_PAGE ASM_CONST(0x0)
-#define CPU_FTR_TLBIEL ASM_CONST(0x0)
-#define CPU_FTR_NOEXECUTE ASM_CONST(0x0)
-#define CPU_FTR_IABR ASM_CONST(0x0)
-#define CPU_FTR_MMCRA ASM_CONST(0x0)
-#define CPU_FTR_CTRL ASM_CONST(0x0)
-#define CPU_FTR_SMT ASM_CONST(0x0)
-#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0)
-#define CPU_FTR_LOCKLESS_TLBIE ASM_CONST(0x0)
-#define CPU_FTR_CI_LARGE_PAGE ASM_CONST(0x0)
-#define CPU_FTR_PURR ASM_CONST(0x0)
+#define LONG_ASM_CONST(x) 0
#endif
+#define CPU_FTR_SLB LONG_ASM_CONST(0x0000000100000000)
+#define CPU_FTR_16M_PAGE LONG_ASM_CONST(0x0000000200000000)
+#define CPU_FTR_TLBIEL LONG_ASM_CONST(0x0000000400000000)
+#define CPU_FTR_NOEXECUTE LONG_ASM_CONST(0x0000000800000000)
+#define CPU_FTR_IABR LONG_ASM_CONST(0x0000002000000000)
+#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000004000000000)
+#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000008000000000)
+#define CPU_FTR_SMT LONG_ASM_CONST(0x0000010000000000)
+#define CPU_FTR_COHERENT_ICACHE LONG_ASM_CONST(0x0000020000000000)
+#define CPU_FTR_LOCKLESS_TLBIE LONG_ASM_CONST(0x0000040000000000)
+#define CPU_FTR_CI_LARGE_PAGE LONG_ASM_CONST(0x0000100000000000)
+#define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000200000000000)
+#define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000)
+
#ifndef __ASSEMBLY__
#define CPU_FTR_PPCAS_ARCH_V2_BASE (CPU_FTR_SLB | \
diff --git a/include/asm-powerpc/iseries/it_lp_queue.h b/include/asm-powerpc/iseries/it_lp_queue.h
index b7c6fc12cce..284c5a7db3a 100644
--- a/include/asm-powerpc/iseries/it_lp_queue.h
+++ b/include/asm-powerpc/iseries/it_lp_queue.h
@@ -29,20 +29,20 @@
struct HvLpEvent;
-#define ITMaxLpQueues 8
+#define IT_LP_MAX_QUEUES 8
-#define NotUsed 0 // Queue will not be used by PLIC
-#define DedicatedIo 1 // Queue dedicated to IO processor specified
-#define DedicatedLp 2 // Queue dedicated to LP specified
-#define Shared 3 // Queue shared for both IO and LP
+#define IT_LP_NOT_USED 0 /* Queue will not be used by PLIC */
+#define IT_LP_DEDICATED_IO 1 /* Queue dedicated to IO processor specified */
+#define IT_LP_DEDICATED_LP 2 /* Queue dedicated to LP specified */
+#define IT_LP_SHARED 3 /* Queue shared for both IO and LP */
-#define LpEventStackSize 4096
-#define LpEventMaxSize 256
-#define LpEventAlign 64
+#define IT_LP_EVENT_STACK_SIZE 4096
+#define IT_LP_EVENT_MAX_SIZE 256
+#define IT_LP_EVENT_ALIGN 64
struct hvlpevent_queue {
/*
- * The xSlicCurEventPtr is the pointer to the next event stack entry
+ * The hq_current_event is the pointer to the next event stack entry
* that will become valid. The OS must peek at this entry to determine
* if it is valid. PLIC will set the valid indicator as the very last
* store into that entry.
@@ -52,23 +52,23 @@ struct hvlpevent_queue {
* location again.
*
* If the event stack fills and there are overflow events, then PLIC
- * will set the xPlicOverflowIntPending flag in which case the OS will
+ * will set the hq_overflow_pending flag in which case the OS will
* have to fetch the additional LP events once they have drained the
* event stack.
*
* The first 16-bytes are known by both the OS and PLIC. The remainder
* of the cache line is for use by the OS.
*/
- u8 xPlicOverflowIntPending;// 0x00 Overflow events are pending
- u8 xPlicStatus; // 0x01 DedicatedIo or DedicatedLp or NotUsed
- u16 xSlicLogicalProcIndex; // 0x02 Logical Proc Index for correlation
- u8 xPlicRsvd[12]; // 0x04
- char *xSlicCurEventPtr; // 0x10
- char *xSlicLastValidEventPtr; // 0x18
- char *xSlicEventStackPtr; // 0x20
- u8 xIndex; // 0x28 unique sequential index.
- u8 xSlicRsvd[3]; // 0x29-2b
- spinlock_t lock;
+ u8 hq_overflow_pending; /* 0x00 Overflow events are pending */
+ u8 hq_status; /* 0x01 DedicatedIo or DedicatedLp or NotUsed */
+ u16 hq_proc_index; /* 0x02 Logical Proc Index for correlation */
+ u8 hq_reserved1[12]; /* 0x04 */
+ char *hq_current_event; /* 0x10 */
+ char *hq_last_event; /* 0x18 */
+ char *hq_event_stack; /* 0x20 */
+ u8 hq_index; /* 0x28 unique sequential index. */
+ u8 hq_reserved2[3]; /* 0x29-2b */
+ spinlock_t hq_lock;
};
extern struct hvlpevent_queue hvlpevent_queue;
diff --git a/include/asm-powerpc/kdump.h b/include/asm-powerpc/kdump.h
index 5a5c3b5ab1e..dc1574c945f 100644
--- a/include/asm-powerpc/kdump.h
+++ b/include/asm-powerpc/kdump.h
@@ -15,6 +15,8 @@
#define KDUMP_TRAMPOLINE_START 0x0100
#define KDUMP_TRAMPOLINE_END 0x3000
+#define KDUMP_MIN_TCE_ENTRIES 2048
+
#else /* !CONFIG_CRASH_DUMP */
#define PHYSICAL_START 0x0
diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h
index efe8872ec58..8f7fd5cfec3 100644
--- a/include/asm-powerpc/kexec.h
+++ b/include/asm-powerpc/kexec.h
@@ -112,9 +112,13 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
#ifdef __powerpc64__
extern void kexec_smp_wait(void); /* get and clear naca physid, wait for
master to copy new code to 0 */
-extern void __init kexec_setup(void);
extern int crashing_cpu;
extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
+extern cpumask_t cpus_in_sr;
+static inline int kexec_sr_activated(int cpu)
+{
+ return cpu_isset(cpu,cpus_in_sr);
+}
#endif /* __powerpc64 __ */
struct kimage;
@@ -124,10 +128,13 @@ extern int default_machine_kexec_prepare(struct kimage *image);
extern void default_machine_crash_shutdown(struct pt_regs *regs);
extern void machine_kexec_simple(struct kimage *image);
+extern void crash_kexec_secondary(struct pt_regs *regs);
extern int overlaps_crashkernel(unsigned long start, unsigned long size);
extern void reserve_crashkernel(void);
#else /* !CONFIG_KEXEC */
+static inline int kexec_sr_activated(int cpu) { return 0; }
+static inline void crash_kexec_secondary(struct pt_regs *regs) { }
static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
{
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 73db1f71329..eba133d149a 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -81,6 +81,8 @@ struct machdep_calls {
void (*tce_free)(struct iommu_table *tbl,
long index,
long npages);
+ unsigned long (*tce_get)(struct iommu_table *tbl,
+ long index);
void (*tce_flush)(struct iommu_table *tbl);
void (*iommu_dev_setup)(struct pci_dev *dev);
void (*iommu_bus_setup)(struct pci_bus *bus);
diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h
index 3a5ebe229af..c3fc7a28e3c 100644
--- a/include/asm-powerpc/mmu.h
+++ b/include/asm-powerpc/mmu.h
@@ -238,7 +238,6 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
unsigned long ea, unsigned long vsid, int local,
unsigned long trap);
-extern void htab_finish_init(void);
extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long mode,
int psize);
diff --git a/include/asm-powerpc/mmu_context.h b/include/asm-powerpc/mmu_context.h
index 8c6b1a6d944..083ac917bd2 100644
--- a/include/asm-powerpc/mmu_context.h
+++ b/include/asm-powerpc/mmu_context.h
@@ -25,8 +25,13 @@ static inline void enter_lazy_tlb(struct mm_struct *mm,
{
}
+/*
+ * The proto-VSID space has 2^35 - 1 segments available for user mappings.
+ * Each segment contains 2^28 bytes. Each context maps 2^44 bytes,
+ * so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
+ */
#define NO_CONTEXT 0
-#define MAX_CONTEXT (0x100000-1)
+#define MAX_CONTEXT ((1UL << 19) - 1)
extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
extern void destroy_context(struct mm_struct *mm);
diff --git a/include/asm-powerpc/mpc86xx.h b/include/asm-powerpc/mpc86xx.h
index d0a6718d188..f260382739f 100644
--- a/include/asm-powerpc/mpc86xx.h
+++ b/include/asm-powerpc/mpc86xx.h
@@ -15,15 +15,10 @@
#ifndef __ASM_POWERPC_MPC86xx_H__
#define __ASM_POWERPC_MPC86xx_H__
-#include <linux/config.h>
#include <asm/mmu.h>
#ifdef CONFIG_PPC_86xx
-#ifdef CONFIG_MPC8641_HPCN
-#include <platforms/86xx/mpc8641_hpcn.h>
-#endif
-
#define _IO_BASE isa_io_base
#define _ISA_MEM_BASE isa_mem_base
#ifdef CONFIG_PCI
diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h
index 02e213e3d69..a33c6acffa6 100644
--- a/include/asm-powerpc/rtas.h
+++ b/include/asm-powerpc/rtas.h
@@ -181,6 +181,9 @@ extern int rtas_set_rtc_time(struct rtc_time *rtc_time);
extern unsigned int rtas_busy_delay_time(int status);
extern unsigned int rtas_busy_delay(int status);
+extern int early_init_dt_scan_rtas(unsigned long node,
+ const char *uname, int depth, void *data);
+
extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
/* Error types logged. */
diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h
index 4463148c659..dcde4410348 100644
--- a/include/asm-powerpc/time.h
+++ b/include/asm-powerpc/time.h
@@ -18,8 +18,9 @@
#include <linux/percpu.h>
#include <asm/processor.h>
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_ISERIES
#include <asm/paca.h>
+#include <asm/firmware.h>
#include <asm/iseries/hv_call.h>
#endif
@@ -177,7 +178,8 @@ static inline void set_dec(int val)
#ifdef CONFIG_PPC_ISERIES
int cur_dec;
- if (get_lppaca()->shared_proc) {
+ if (firmware_has_feature(FW_FEATURE_ISERIES) &&
+ get_lppaca()->shared_proc) {
get_lppaca()->virtual_decr = val;
cur_dec = get_dec();
if (cur_dec > val)
diff --git a/include/asm-powerpc/todc.h b/include/asm-powerpc/todc.h
new file mode 100644
index 00000000000..60a8c39b8c1
--- /dev/null
+++ b/include/asm-powerpc/todc.h
@@ -0,0 +1,487 @@
+/*
+ * Definitions for the M48Txx and mc146818 series of Time of day/Real Time
+ * Clock chips.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * Support for the M48T37/M48T59/.../mc146818 Real Time Clock chips.
+ * Purpose is to make one generic file that handles all of these chips instead
+ * of every platform implementing the same code over & over again.
+ */
+
+#ifndef __PPC_KERNEL_TODC_H
+#define __PPC_KERNEL_TODC_H
+
+typedef struct {
+ uint rtc_type; /* your particular chip */
+
+ /*
+ * Following are the addresses of the AS0, AS1, and DATA registers
+ * of these chips. Note that these are board-specific.
+ */
+ unsigned int nvram_as0;
+ unsigned int nvram_as1;
+ unsigned int nvram_data;
+
+ /*
+ * Define bits to stop external set of regs from changing so
+ * the chip can be read/written reliably.
+ */
+ unsigned char enable_read;
+ unsigned char enable_write;
+
+ /*
+ * Following is the number of AS0 address bits. This is normally
+ * 8 but some bad hardware routes address lines incorrectly.
+ */
+ int as0_bits;
+
+ int nvram_size; /* Size of NVRAM on chip */
+ int sw_flags; /* Software control flags */
+
+ /* Following are the register offsets for the particular chip */
+ int year;
+ int month;
+ int day_of_month;
+ int day_of_week;
+ int hours;
+ int minutes;
+ int seconds;
+ int control_b;
+ int control_a;
+ int watchdog;
+ int interrupts;
+ int alarm_date;
+ int alarm_hour;
+ int alarm_minutes;
+ int alarm_seconds;
+ int century;
+ int flags;
+
+ /*
+ * Some RTC chips have their NVRAM buried behind a addr/data pair of
+ * regs on the first level/clock registers. The following fields
+ * are the addresses for those addr/data regs.
+ */
+ int nvram_addr_reg;
+ int nvram_data_reg;
+} todc_info_t;
+
+/*
+ * Define the types of TODC/RTC variants that are supported in
+ * arch/ppc/kernel/todc_time.c
+ * Make a new one of these for any chip somehow differs from what's already
+ * defined. That way, if you ever need to put in code to touch those
+ * bits/registers in todc_time.c, you can put it inside an
+ * 'if (todc_info->rtc_type == TODC_TYPE_XXX)' so you won't break
+ * anyone else.
+ */
+#define TODC_TYPE_MK48T35 1
+#define TODC_TYPE_MK48T37 2
+#define TODC_TYPE_MK48T59 3
+#define TODC_TYPE_DS1693 4 /* Dallas DS1693 RTC */
+#define TODC_TYPE_DS1743 5 /* Dallas DS1743 RTC */
+#define TODC_TYPE_DS1746 6 /* Dallas DS1746 RTC */
+#define TODC_TYPE_DS1747 7 /* Dallas DS1747 RTC */
+#define TODC_TYPE_DS1501 8 /* Dallas DS1501 RTC */
+#define TODC_TYPE_DS1643 9 /* Dallas DS1643 RTC */
+#define TODC_TYPE_PC97307 10 /* PC97307 internal RTC */
+#define TODC_TYPE_DS1557 11 /* Dallas DS1557 RTC */
+#define TODC_TYPE_DS17285 12 /* Dallas DS17285 RTC */
+#define TODC_TYPE_DS1553 13 /* Dallas DS1553 RTC */
+#define TODC_TYPE_MC146818 100 /* Leave room for m48txx's */
+
+/*
+ * Bit to clear/set to enable reads/writes to the chip
+ */
+#define TODC_MK48TXX_CNTL_A_R 0x40
+#define TODC_MK48TXX_CNTL_A_W 0x80
+#define TODC_MK48TXX_DAY_CB 0x80
+
+#define TODC_DS1501_CNTL_B_TE 0x80
+
+/*
+ * Define flag bits used by todc routines.
+ */
+#define TODC_FLAG_2_LEVEL_NVRAM 0x00000001
+
+/*
+ * Define the values for the various RTC's that should to into the todc_info
+ * table.
+ * Note: The XXX_NVRAM_SIZE, XXX_NVRAM_ADDR_REG, and XXX_NVRAM_DATA_REG only
+ * matter if XXX_SW_FLAGS has TODC_FLAG_2_LEVEL_NVRAM set.
+ */
+#define TODC_TYPE_MK48T35_NVRAM_SIZE 0x7ff8
+#define TODC_TYPE_MK48T35_SW_FLAGS 0
+#define TODC_TYPE_MK48T35_YEAR 0x7fff
+#define TODC_TYPE_MK48T35_MONTH 0x7ffe
+#define TODC_TYPE_MK48T35_DOM 0x7ffd /* Day of Month */
+#define TODC_TYPE_MK48T35_DOW 0x7ffc /* Day of Week */
+#define TODC_TYPE_MK48T35_HOURS 0x7ffb
+#define TODC_TYPE_MK48T35_MINUTES 0x7ffa
+#define TODC_TYPE_MK48T35_SECONDS 0x7ff9
+#define TODC_TYPE_MK48T35_CNTL_B 0x7ff9
+#define TODC_TYPE_MK48T35_CNTL_A 0x7ff8
+#define TODC_TYPE_MK48T35_WATCHDOG 0x0000
+#define TODC_TYPE_MK48T35_INTERRUPTS 0x0000
+#define TODC_TYPE_MK48T35_ALARM_DATE 0x0000
+#define TODC_TYPE_MK48T35_ALARM_HOUR 0x0000
+#define TODC_TYPE_MK48T35_ALARM_MINUTES 0x0000
+#define TODC_TYPE_MK48T35_ALARM_SECONDS 0x0000
+#define TODC_TYPE_MK48T35_CENTURY 0x0000
+#define TODC_TYPE_MK48T35_FLAGS 0x0000
+#define TODC_TYPE_MK48T35_NVRAM_ADDR_REG 0
+#define TODC_TYPE_MK48T35_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_MK48T37_NVRAM_SIZE 0x7ff0
+#define TODC_TYPE_MK48T37_SW_FLAGS 0
+#define TODC_TYPE_MK48T37_YEAR 0x7fff
+#define TODC_TYPE_MK48T37_MONTH 0x7ffe
+#define TODC_TYPE_MK48T37_DOM 0x7ffd /* Day of Month */
+#define TODC_TYPE_MK48T37_DOW 0x7ffc /* Day of Week */
+#define TODC_TYPE_MK48T37_HOURS 0x7ffb
+#define TODC_TYPE_MK48T37_MINUTES 0x7ffa
+#define TODC_TYPE_MK48T37_SECONDS 0x7ff9
+#define TODC_TYPE_MK48T37_CNTL_B 0x7ff9
+#define TODC_TYPE_MK48T37_CNTL_A 0x7ff8
+#define TODC_TYPE_MK48T37_WATCHDOG 0x7ff7
+#define TODC_TYPE_MK48T37_INTERRUPTS 0x7ff6
+#define TODC_TYPE_MK48T37_ALARM_DATE 0x7ff5
+#define TODC_TYPE_MK48T37_ALARM_HOUR 0x7ff4
+#define TODC_TYPE_MK48T37_ALARM_MINUTES 0x7ff3
+#define TODC_TYPE_MK48T37_ALARM_SECONDS 0x7ff2
+#define TODC_TYPE_MK48T37_CENTURY 0x7ff1
+#define TODC_TYPE_MK48T37_FLAGS 0x7ff0
+#define TODC_TYPE_MK48T37_NVRAM_ADDR_REG 0
+#define TODC_TYPE_MK48T37_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_MK48T59_NVRAM_SIZE 0x1ff0
+#define TODC_TYPE_MK48T59_SW_FLAGS 0
+#define TODC_TYPE_MK48T59_YEAR 0x1fff
+#define TODC_TYPE_MK48T59_MONTH 0x1ffe
+#define TODC_TYPE_MK48T59_DOM 0x1ffd /* Day of Month */
+#define TODC_TYPE_MK48T59_DOW 0x1ffc /* Day of Week */
+#define TODC_TYPE_MK48T59_HOURS 0x1ffb
+#define TODC_TYPE_MK48T59_MINUTES 0x1ffa
+#define TODC_TYPE_MK48T59_SECONDS 0x1ff9
+#define TODC_TYPE_MK48T59_CNTL_B 0x1ff9
+#define TODC_TYPE_MK48T59_CNTL_A 0x1ff8
+#define TODC_TYPE_MK48T59_WATCHDOG 0x1fff
+#define TODC_TYPE_MK48T59_INTERRUPTS 0x1fff
+#define TODC_TYPE_MK48T59_ALARM_DATE 0x1fff
+#define TODC_TYPE_MK48T59_ALARM_HOUR 0x1fff
+#define TODC_TYPE_MK48T59_ALARM_MINUTES 0x1fff
+#define TODC_TYPE_MK48T59_ALARM_SECONDS 0x1fff
+#define TODC_TYPE_MK48T59_CENTURY 0x1fff
+#define TODC_TYPE_MK48T59_FLAGS 0x1fff
+#define TODC_TYPE_MK48T59_NVRAM_ADDR_REG 0
+#define TODC_TYPE_MK48T59_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1501_NVRAM_SIZE 0x100
+#define TODC_TYPE_DS1501_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM
+#define TODC_TYPE_DS1501_YEAR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x06)
+#define TODC_TYPE_DS1501_MONTH (TODC_TYPE_DS1501_NVRAM_SIZE + 0x05)
+#define TODC_TYPE_DS1501_DOM (TODC_TYPE_DS1501_NVRAM_SIZE + 0x04)
+#define TODC_TYPE_DS1501_DOW (TODC_TYPE_DS1501_NVRAM_SIZE + 0x03)
+#define TODC_TYPE_DS1501_HOURS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x02)
+#define TODC_TYPE_DS1501_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x01)
+#define TODC_TYPE_DS1501_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x00)
+#define TODC_TYPE_DS1501_CNTL_B (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f)
+#define TODC_TYPE_DS1501_CNTL_A (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f)
+#define TODC_TYPE_DS1501_WATCHDOG (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
+#define TODC_TYPE_DS1501_INTERRUPTS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
+#define TODC_TYPE_DS1501_ALARM_DATE (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0b)
+#define TODC_TYPE_DS1501_ALARM_HOUR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0a)
+#define TODC_TYPE_DS1501_ALARM_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x09)
+#define TODC_TYPE_DS1501_ALARM_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x08)
+#define TODC_TYPE_DS1501_CENTURY (TODC_TYPE_DS1501_NVRAM_SIZE + 0x07)
+#define TODC_TYPE_DS1501_FLAGS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
+#define TODC_TYPE_DS1501_NVRAM_ADDR_REG 0x10
+#define TODC_TYPE_DS1501_NVRAM_DATA_REG 0x13
+
+#define TODC_TYPE_DS1553_NVRAM_SIZE 0x1ff0
+#define TODC_TYPE_DS1553_SW_FLAGS 0
+#define TODC_TYPE_DS1553_YEAR 0x1fff
+#define TODC_TYPE_DS1553_MONTH 0x1ffe
+#define TODC_TYPE_DS1553_DOM 0x1ffd /* Day of Month */
+#define TODC_TYPE_DS1553_DOW 0x1ffc /* Day of Week */
+#define TODC_TYPE_DS1553_HOURS 0x1ffb
+#define TODC_TYPE_DS1553_MINUTES 0x1ffa
+#define TODC_TYPE_DS1553_SECONDS 0x1ff9
+#define TODC_TYPE_DS1553_CNTL_B 0x1ff9
+#define TODC_TYPE_DS1553_CNTL_A 0x1ff8 /* control_a R/W regs */
+#define TODC_TYPE_DS1553_WATCHDOG 0x1ff7
+#define TODC_TYPE_DS1553_INTERRUPTS 0x1ff6
+#define TODC_TYPE_DS1553_ALARM_DATE 0x1ff5
+#define TODC_TYPE_DS1553_ALARM_HOUR 0x1ff4
+#define TODC_TYPE_DS1553_ALARM_MINUTES 0x1ff3
+#define TODC_TYPE_DS1553_ALARM_SECONDS 0x1ff2
+#define TODC_TYPE_DS1553_CENTURY 0x1ff8
+#define TODC_TYPE_DS1553_FLAGS 0x1ff0
+#define TODC_TYPE_DS1553_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1553_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1557_NVRAM_SIZE 0x7fff0
+#define TODC_TYPE_DS1557_SW_FLAGS 0
+#define TODC_TYPE_DS1557_YEAR 0x7ffff
+#define TODC_TYPE_DS1557_MONTH 0x7fffe
+#define TODC_TYPE_DS1557_DOM 0x7fffd /* Day of Month */
+#define TODC_TYPE_DS1557_DOW 0x7fffc /* Day of Week */
+#define TODC_TYPE_DS1557_HOURS 0x7fffb
+#define TODC_TYPE_DS1557_MINUTES 0x7fffa
+#define TODC_TYPE_DS1557_SECONDS 0x7fff9
+#define TODC_TYPE_DS1557_CNTL_B 0x7fff9
+#define TODC_TYPE_DS1557_CNTL_A 0x7fff8 /* control_a R/W regs */
+#define TODC_TYPE_DS1557_WATCHDOG 0x7fff7
+#define TODC_TYPE_DS1557_INTERRUPTS 0x7fff6
+#define TODC_TYPE_DS1557_ALARM_DATE 0x7fff5
+#define TODC_TYPE_DS1557_ALARM_HOUR 0x7fff4
+#define TODC_TYPE_DS1557_ALARM_MINUTES 0x7fff3
+#define TODC_TYPE_DS1557_ALARM_SECONDS 0x7fff2
+#define TODC_TYPE_DS1557_CENTURY 0x7fff8
+#define TODC_TYPE_DS1557_FLAGS 0x7fff0
+#define TODC_TYPE_DS1557_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1557_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1643_NVRAM_SIZE 0x1ff8
+#define TODC_TYPE_DS1643_SW_FLAGS 0
+#define TODC_TYPE_DS1643_YEAR 0x1fff
+#define TODC_TYPE_DS1643_MONTH 0x1ffe
+#define TODC_TYPE_DS1643_DOM 0x1ffd /* Day of Month */
+#define TODC_TYPE_DS1643_DOW 0x1ffc /* Day of Week */
+#define TODC_TYPE_DS1643_HOURS 0x1ffb
+#define TODC_TYPE_DS1643_MINUTES 0x1ffa
+#define TODC_TYPE_DS1643_SECONDS 0x1ff9
+#define TODC_TYPE_DS1643_CNTL_B 0x1ff9
+#define TODC_TYPE_DS1643_CNTL_A 0x1ff8 /* control_a R/W regs */
+#define TODC_TYPE_DS1643_WATCHDOG 0x1fff
+#define TODC_TYPE_DS1643_INTERRUPTS 0x1fff
+#define TODC_TYPE_DS1643_ALARM_DATE 0x1fff
+#define TODC_TYPE_DS1643_ALARM_HOUR 0x1fff
+#define TODC_TYPE_DS1643_ALARM_MINUTES 0x1fff
+#define TODC_TYPE_DS1643_ALARM_SECONDS 0x1fff
+#define TODC_TYPE_DS1643_CENTURY 0x1ff8
+#define TODC_TYPE_DS1643_FLAGS 0x1fff
+#define TODC_TYPE_DS1643_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1643_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1693_NVRAM_SIZE 0 /* Not handled yet */
+#define TODC_TYPE_DS1693_SW_FLAGS 0
+#define TODC_TYPE_DS1693_YEAR 0x09
+#define TODC_TYPE_DS1693_MONTH 0x08
+#define TODC_TYPE_DS1693_DOM 0x07 /* Day of Month */
+#define TODC_TYPE_DS1693_DOW 0x06 /* Day of Week */
+#define TODC_TYPE_DS1693_HOURS 0x04
+#define TODC_TYPE_DS1693_MINUTES 0x02
+#define TODC_TYPE_DS1693_SECONDS 0x00
+#define TODC_TYPE_DS1693_CNTL_B 0x0b
+#define TODC_TYPE_DS1693_CNTL_A 0x0a
+#define TODC_TYPE_DS1693_WATCHDOG 0xff
+#define TODC_TYPE_DS1693_INTERRUPTS 0xff
+#define TODC_TYPE_DS1693_ALARM_DATE 0x49
+#define TODC_TYPE_DS1693_ALARM_HOUR 0x05
+#define TODC_TYPE_DS1693_ALARM_MINUTES 0x03
+#define TODC_TYPE_DS1693_ALARM_SECONDS 0x01
+#define TODC_TYPE_DS1693_CENTURY 0x48
+#define TODC_TYPE_DS1693_FLAGS 0xff
+#define TODC_TYPE_DS1693_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1693_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1743_NVRAM_SIZE 0x1ff8
+#define TODC_TYPE_DS1743_SW_FLAGS 0
+#define TODC_TYPE_DS1743_YEAR 0x1fff
+#define TODC_TYPE_DS1743_MONTH 0x1ffe
+#define TODC_TYPE_DS1743_DOM 0x1ffd /* Day of Month */
+#define TODC_TYPE_DS1743_DOW 0x1ffc /* Day of Week */
+#define TODC_TYPE_DS1743_HOURS 0x1ffb
+#define TODC_TYPE_DS1743_MINUTES 0x1ffa
+#define TODC_TYPE_DS1743_SECONDS 0x1ff9
+#define TODC_TYPE_DS1743_CNTL_B 0x1ff9
+#define TODC_TYPE_DS1743_CNTL_A 0x1ff8 /* control_a R/W regs */
+#define TODC_TYPE_DS1743_WATCHDOG 0x1fff
+#define TODC_TYPE_DS1743_INTERRUPTS 0x1fff
+#define TODC_TYPE_DS1743_ALARM_DATE 0x1fff
+#define TODC_TYPE_DS1743_ALARM_HOUR 0x1fff
+#define TODC_TYPE_DS1743_ALARM_MINUTES 0x1fff
+#define TODC_TYPE_DS1743_ALARM_SECONDS 0x1fff
+#define TODC_TYPE_DS1743_CENTURY 0x1ff8
+#define TODC_TYPE_DS1743_FLAGS 0x1fff
+#define TODC_TYPE_DS1743_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1743_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1746_NVRAM_SIZE 0x1fff8
+#define TODC_TYPE_DS1746_SW_FLAGS 0
+#define TODC_TYPE_DS1746_YEAR 0x1ffff
+#define TODC_TYPE_DS1746_MONTH 0x1fffe
+#define TODC_TYPE_DS1746_DOM 0x1fffd /* Day of Month */
+#define TODC_TYPE_DS1746_DOW 0x1fffc /* Day of Week */
+#define TODC_TYPE_DS1746_HOURS 0x1fffb
+#define TODC_TYPE_DS1746_MINUTES 0x1fffa
+#define TODC_TYPE_DS1746_SECONDS 0x1fff9
+#define TODC_TYPE_DS1746_CNTL_B 0x1fff9
+#define TODC_TYPE_DS1746_CNTL_A 0x1fff8 /* control_a R/W regs */
+#define TODC_TYPE_DS1746_WATCHDOG 0x00000
+#define TODC_TYPE_DS1746_INTERRUPTS 0x00000
+#define TODC_TYPE_DS1746_ALARM_DATE 0x00000
+#define TODC_TYPE_DS1746_ALARM_HOUR 0x00000
+#define TODC_TYPE_DS1746_ALARM_MINUTES 0x00000
+#define TODC_TYPE_DS1746_ALARM_SECONDS 0x00000
+#define TODC_TYPE_DS1746_CENTURY 0x00000
+#define TODC_TYPE_DS1746_FLAGS 0x00000
+#define TODC_TYPE_DS1746_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1746_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1747_NVRAM_SIZE 0x7fff8
+#define TODC_TYPE_DS1747_SW_FLAGS 0
+#define TODC_TYPE_DS1747_YEAR 0x7ffff
+#define TODC_TYPE_DS1747_MONTH 0x7fffe
+#define TODC_TYPE_DS1747_DOM 0x7fffd /* Day of Month */
+#define TODC_TYPE_DS1747_DOW 0x7fffc /* Day of Week */
+#define TODC_TYPE_DS1747_HOURS 0x7fffb
+#define TODC_TYPE_DS1747_MINUTES 0x7fffa
+#define TODC_TYPE_DS1747_SECONDS 0x7fff9
+#define TODC_TYPE_DS1747_CNTL_B 0x7fff9
+#define TODC_TYPE_DS1747_CNTL_A 0x7fff8 /* control_a R/W regs */
+#define TODC_TYPE_DS1747_WATCHDOG 0x00000
+#define TODC_TYPE_DS1747_INTERRUPTS 0x00000
+#define TODC_TYPE_DS1747_ALARM_DATE 0x00000
+#define TODC_TYPE_DS1747_ALARM_HOUR 0x00000
+#define TODC_TYPE_DS1747_ALARM_MINUTES 0x00000
+#define TODC_TYPE_DS1747_ALARM_SECONDS 0x00000
+#define TODC_TYPE_DS1747_CENTURY 0x00000
+#define TODC_TYPE_DS1747_FLAGS 0x00000
+#define TODC_TYPE_DS1747_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1747_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS17285_NVRAM_SIZE (0x1000-0x80) /* 4Kx8 NVRAM (minus RTC regs) */
+#define TODC_TYPE_DS17285_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM
+#define TODC_TYPE_DS17285_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x00)
+#define TODC_TYPE_DS17285_ALARM_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x01)
+#define TODC_TYPE_DS17285_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x02)
+#define TODC_TYPE_DS17285_ALARM_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x03)
+#define TODC_TYPE_DS17285_HOURS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x04)
+#define TODC_TYPE_DS17285_ALARM_HOUR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x05)
+#define TODC_TYPE_DS17285_DOW (TODC_TYPE_DS17285_NVRAM_SIZE + 0x06)
+#define TODC_TYPE_DS17285_DOM (TODC_TYPE_DS17285_NVRAM_SIZE + 0x07)
+#define TODC_TYPE_DS17285_MONTH (TODC_TYPE_DS17285_NVRAM_SIZE + 0x08)
+#define TODC_TYPE_DS17285_YEAR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x09)
+#define TODC_TYPE_DS17285_CNTL_A (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0A)
+#define TODC_TYPE_DS17285_CNTL_B (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0B)
+#define TODC_TYPE_DS17285_CNTL_C (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0C)
+#define TODC_TYPE_DS17285_CNTL_D (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0D)
+#define TODC_TYPE_DS17285_WATCHDOG 0
+#define TODC_TYPE_DS17285_INTERRUPTS 0
+#define TODC_TYPE_DS17285_ALARM_DATE 0
+#define TODC_TYPE_DS17285_CENTURY 0
+#define TODC_TYPE_DS17285_FLAGS 0
+#define TODC_TYPE_DS17285_NVRAM_ADDR_REG 0x50
+#define TODC_TYPE_DS17285_NVRAM_DATA_REG 0x53
+
+#define TODC_TYPE_MC146818_NVRAM_SIZE 0 /* XXXX */
+#define TODC_TYPE_MC146818_SW_FLAGS 0
+#define TODC_TYPE_MC146818_YEAR 0x09
+#define TODC_TYPE_MC146818_MONTH 0x08
+#define TODC_TYPE_MC146818_DOM 0x07 /* Day of Month */
+#define TODC_TYPE_MC146818_DOW 0x06 /* Day of Week */
+#define TODC_TYPE_MC146818_HOURS 0x04
+#define TODC_TYPE_MC146818_MINUTES 0x02
+#define TODC_TYPE_MC146818_SECONDS 0x00
+#define TODC_TYPE_MC146818_CNTL_B 0x0a
+#define TODC_TYPE_MC146818_CNTL_A 0x0b /* control_a R/W regs */
+#define TODC_TYPE_MC146818_WATCHDOG 0
+#define TODC_TYPE_MC146818_INTERRUPTS 0x0c
+#define TODC_TYPE_MC146818_ALARM_DATE 0xff
+#define TODC_TYPE_MC146818_ALARM_HOUR 0x05
+#define TODC_TYPE_MC146818_ALARM_MINUTES 0x03
+#define TODC_TYPE_MC146818_ALARM_SECONDS 0x01
+#define TODC_TYPE_MC146818_CENTURY 0xff
+#define TODC_TYPE_MC146818_FLAGS 0xff
+#define TODC_TYPE_MC146818_NVRAM_ADDR_REG 0
+#define TODC_TYPE_MC146818_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_PC97307_NVRAM_SIZE 0 /* No NVRAM? */
+#define TODC_TYPE_PC97307_SW_FLAGS 0
+#define TODC_TYPE_PC97307_YEAR 0x09
+#define TODC_TYPE_PC97307_MONTH 0x08
+#define TODC_TYPE_PC97307_DOM 0x07 /* Day of Month */
+#define TODC_TYPE_PC97307_DOW 0x06 /* Day of Week */
+#define TODC_TYPE_PC97307_HOURS 0x04
+#define TODC_TYPE_PC97307_MINUTES 0x02
+#define TODC_TYPE_PC97307_SECONDS 0x00
+#define TODC_TYPE_PC97307_CNTL_B 0x0a
+#define TODC_TYPE_PC97307_CNTL_A 0x0b /* control_a R/W regs */
+#define TODC_TYPE_PC97307_WATCHDOG 0x0c
+#define TODC_TYPE_PC97307_INTERRUPTS 0x0d
+#define TODC_TYPE_PC97307_ALARM_DATE 0xff
+#define TODC_TYPE_PC97307_ALARM_HOUR 0x05
+#define TODC_TYPE_PC97307_ALARM_MINUTES 0x03
+#define TODC_TYPE_PC97307_ALARM_SECONDS 0x01
+#define TODC_TYPE_PC97307_CENTURY 0xff
+#define TODC_TYPE_PC97307_FLAGS 0xff
+#define TODC_TYPE_PC97307_NVRAM_ADDR_REG 0
+#define TODC_TYPE_PC97307_NVRAM_DATA_REG 0
+
+/*
+ * Define macros to allocate and init the todc_info_t table that will
+ * be used by the todc_time.c routines.
+ */
+#define TODC_ALLOC() \
+ static todc_info_t todc_info_alloc; \
+ todc_info_t *todc_info = &todc_info_alloc;
+
+#define TODC_INIT(clock_type, as0, as1, data, bits) { \
+ todc_info->rtc_type = clock_type; \
+ \
+ todc_info->nvram_as0 = (unsigned int)(as0); \
+ todc_info->nvram_as1 = (unsigned int)(as1); \
+ todc_info->nvram_data = (unsigned int)(data); \
+ \
+ todc_info->as0_bits = (bits); \
+ \
+ todc_info->nvram_size = clock_type ##_NVRAM_SIZE; \
+ todc_info->sw_flags = clock_type ##_SW_FLAGS; \
+ \
+ todc_info->year = clock_type ##_YEAR; \
+ todc_info->month = clock_type ##_MONTH; \
+ todc_info->day_of_month = clock_type ##_DOM; \
+ todc_info->day_of_week = clock_type ##_DOW; \
+ todc_info->hours = clock_type ##_HOURS; \
+ todc_info->minutes = clock_type ##_MINUTES; \
+ todc_info->seconds = clock_type ##_SECONDS; \
+ todc_info->control_b = clock_type ##_CNTL_B; \
+ todc_info->control_a = clock_type ##_CNTL_A; \
+ todc_info->watchdog = clock_type ##_WATCHDOG; \
+ todc_info->interrupts = clock_type ##_INTERRUPTS; \
+ todc_info->alarm_date = clock_type ##_ALARM_DATE; \
+ todc_info->alarm_hour = clock_type ##_ALARM_HOUR; \
+ todc_info->alarm_minutes = clock_type ##_ALARM_MINUTES; \
+ todc_info->alarm_seconds = clock_type ##_ALARM_SECONDS; \
+ todc_info->century = clock_type ##_CENTURY; \
+ todc_info->flags = clock_type ##_FLAGS; \
+ \
+ todc_info->nvram_addr_reg = clock_type ##_NVRAM_ADDR_REG; \
+ todc_info->nvram_data_reg = clock_type ##_NVRAM_DATA_REG; \
+}
+
+extern todc_info_t *todc_info;
+
+unsigned char todc_direct_read_val(int addr);
+void todc_direct_write_val(int addr, unsigned char val);
+unsigned char todc_m48txx_read_val(int addr);
+void todc_m48txx_write_val(int addr, unsigned char val);
+unsigned char todc_mc146818_read_val(int addr);
+void todc_mc146818_write_val(int addr, unsigned char val);
+
+long todc_time_init(void);
+void todc_get_rtc_time(struct rtc_time *);
+int todc_set_rtc_time(struct rtc_time *);
+void todc_calibrate_decr(void);
+
+#endif /* __PPC_KERNEL_TODC_H */
diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h
new file mode 100644
index 00000000000..c4c278d72f7
--- /dev/null
+++ b/include/asm-powerpc/tsi108.h
@@ -0,0 +1,109 @@
+/*
+ * include/asm-ppc/tsi108.h
+ *
+ * common routine and memory layout for Tundra TSI108(Grendel) host bridge
+ * memory controller.
+ *
+ * Author: Jacob Pan (jacob.pan@freescale.com)
+ * Alex Bounine (alexandreb@tundra.com)
+ * 2004 (c) Freescale Semiconductor Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PPC_KERNEL_TSI108_H
+#define __PPC_KERNEL_TSI108_H
+
+#include <asm/pci-bridge.h>
+
+/* Size of entire register space */
+#define TSI108_REG_SIZE (0x10000)
+
+/* Sizes of register spaces for individual blocks */
+#define TSI108_HLP_SIZE 0x1000
+#define TSI108_PCI_SIZE 0x1000
+#define TSI108_CLK_SIZE 0x1000
+#define TSI108_PB_SIZE 0x1000
+#define TSI108_SD_SIZE 0x1000
+#define TSI108_DMA_SIZE 0x1000
+#define TSI108_ETH_SIZE 0x1000
+#define TSI108_I2C_SIZE 0x400
+#define TSI108_MPIC_SIZE 0x400
+#define TSI108_UART0_SIZE 0x200
+#define TSI108_GPIO_SIZE 0x200
+#define TSI108_UART1_SIZE 0x200
+
+/* Offsets within Tsi108(A) CSR space for individual blocks */
+#define TSI108_HLP_OFFSET 0x0000
+#define TSI108_PCI_OFFSET 0x1000
+#define TSI108_CLK_OFFSET 0x2000
+#define TSI108_PB_OFFSET 0x3000
+#define TSI108_SD_OFFSET 0x4000
+#define TSI108_DMA_OFFSET 0x5000
+#define TSI108_ETH_OFFSET 0x6000
+#define TSI108_I2C_OFFSET 0x7000
+#define TSI108_MPIC_OFFSET 0x7400
+#define TSI108_UART0_OFFSET 0x7800
+#define TSI108_GPIO_OFFSET 0x7A00
+#define TSI108_UART1_OFFSET 0x7C00
+
+/* Tsi108 registers used by common code components */
+#define TSI108_PCI_CSR (0x004)
+#define TSI108_PCI_IRP_CFG_CTL (0x180)
+#define TSI108_PCI_IRP_STAT (0x184)
+#define TSI108_PCI_IRP_ENABLE (0x188)
+#define TSI108_PCI_IRP_INTAD (0x18C)
+
+#define TSI108_PCI_IRP_STAT_P_INT (0x00400000)
+#define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000)
+
+#define TSI108_CG_PWRUP_STATUS (0x234)
+
+#define TSI108_PB_ISR (0x00C)
+#define TSI108_PB_ERRCS (0x404)
+#define TSI108_PB_AERR (0x408)
+
+#define TSI108_PB_ERRCS_ES (1 << 1)
+#define TSI108_PB_ISR_PBS_RD_ERR (1 << 8)
+
+#define TSI108_PCI_CFG_BASE_PHYS (0xfb000000)
+#define TSI108_PCI_CFG_SIZE (0x01000000)
+/* Global variables */
+
+extern u32 tsi108_pci_cfg_base;
+/* Exported functions */
+
+extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base);
+extern unsigned long tsi108_get_mem_size(void);
+extern unsigned long tsi108_get_cpu_clk(void);
+extern unsigned long tsi108_get_sdc_clk(void);
+extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val);
+extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 * val);
+extern void tsi108_clear_pci_error(u32 pci_cfg_base);
+
+extern phys_addr_t get_csrbase(void);
+
+typedef struct {
+ u32 regs; /* hw registers base address */
+ u32 phyregs; /* phy registers base address */
+ u16 phy; /* phy address */
+ u16 irq_num; /* irq number */
+ u8 mac_addr[6]; /* phy mac address */
+} hw_info;
+
+extern u32 get_vir_csrbase(void);
+extern u32 tsi108_csr_vir_base;
+
+extern inline u32 tsi108_read_reg(u32 reg_offset)
+{
+ return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
+}
+
+extern inline void tsi108_write_reg(u32 reg_offset, u32 val)
+{
+ out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
+}
+
+#endif /* __PPC_KERNEL_TSI108_H */
diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h
index 19a1517ac43..55e57844fa7 100644
--- a/include/asm-powerpc/udbg.h
+++ b/include/asm-powerpc/udbg.h
@@ -42,7 +42,8 @@ extern void __init udbg_init_debug_lpar(void);
extern void __init udbg_init_pmac_realmode(void);
extern void __init udbg_init_maple_realmode(void);
extern void __init udbg_init_iseries(void);
-extern void __init udbg_init_rtas(void);
+extern void __init udbg_init_rtas_panel(void);
+extern void __init udbg_init_rtas_console(void);
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_UDBG_H */
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 58f0f382597..50087ecf337 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1042,7 +1042,6 @@ asmlinkage long compat_sys_kexec_load(unsigned long entry,
void crash_kexec(struct pt_regs *regs)
{
- struct kimage *image;
int locked;
@@ -1056,12 +1055,11 @@ void crash_kexec(struct pt_regs *regs)
*/
locked = xchg(&kexec_lock, 1);
if (!locked) {
- image = xchg(&kexec_crash_image, NULL);
- if (image) {
+ if (kexec_crash_image) {
struct pt_regs fixed_regs;
crash_setup_regs(&fixed_regs, regs);
machine_crash_shutdown(&fixed_regs);
- machine_kexec(image);
+ machine_kexec(kexec_crash_image);
}
xchg(&kexec_lock, 0);
}