diff options
-rw-r--r-- | sound/soc/codecs/wm8993.c | 8 | ||||
-rw-r--r-- | sound/soc/codecs/wm_hubs.c | 142 | ||||
-rw-r--r-- | sound/soc/codecs/wm_hubs.h | 6 |
3 files changed, 130 insertions, 26 deletions
diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c index 828d8174d5b..bacfc2f20d7 100644 --- a/sound/soc/codecs/wm8993.c +++ b/sound/soc/codecs/wm8993.c @@ -213,6 +213,7 @@ static struct { }; struct wm8993_priv { + struct wm_hubs_data hubs_data; u16 reg_cache[WM8993_REGISTER_COUNT]; struct wm8993_platform_data pdata; struct snd_soc_codec codec; @@ -997,6 +998,11 @@ static int wm8993_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_STANDBY: if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* Tune DC servo configuration */ + snd_soc_write(codec, 0x44, 3); + snd_soc_write(codec, 0x56, 3); + snd_soc_write(codec, 0x44, 0); + /* Bring up VMID with fast soft start */ snd_soc_update_bits(codec, WM8993_ANTIPOP2, WM8993_STARTUP_BIAS_ENA | @@ -1591,6 +1597,8 @@ static int wm8993_i2c_probe(struct i2c_client *i2c, codec->num_dai = 1; codec->private_data = wm8993; + wm8993->hubs_data.hp_startup_mode = 1; + memcpy(wm8993->reg_cache, wm8993_reg_defaults, sizeof(wm8993->reg_cache)); diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index a67319d9ca7..0ad9f5d536c 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -68,24 +68,77 @@ static void wait_for_dc_servo(struct snd_soc_codec *codec) int count = 0; dev_dbg(codec->dev, "Waiting for DC servo...\n"); + do { count++; msleep(1); reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_0); - dev_dbg(codec->dev, "DC servo status: %x\n", reg); - } while ((reg & WM8993_DCS_CAL_COMPLETE_MASK) - != WM8993_DCS_CAL_COMPLETE_MASK && count < 1000); + dev_dbg(codec->dev, "DC servo: %x\n", reg); + } while (reg & WM8993_DCS_DATAPATH_BUSY); - if ((reg & WM8993_DCS_CAL_COMPLETE_MASK) - != WM8993_DCS_CAL_COMPLETE_MASK) + if (reg & WM8993_DCS_DATAPATH_BUSY) dev_err(codec->dev, "Timed out waiting for DC Servo\n"); } /* + * Startup calibration of the DC servo + */ +static void calibrate_dc_servo(struct snd_soc_codec *codec) +{ + struct wm_hubs_data *hubs = codec->private_data; + u16 reg, dcs_cfg; + + /* Set for 32 series updates */ + snd_soc_update_bits(codec, WM8993_DC_SERVO_1, + WM8993_DCS_SERIES_NO_01_MASK, + 32 << WM8993_DCS_SERIES_NO_01_SHIFT); + + /* Enable the DC servo. Write all bits to avoid triggering startup + * or write calibration. + */ + snd_soc_update_bits(codec, WM8993_DC_SERVO_0, + 0xFFFF, + WM8993_DCS_ENA_CHAN_0 | + WM8993_DCS_ENA_CHAN_1 | + WM8993_DCS_TRIG_SERIES_1 | + WM8993_DCS_TRIG_SERIES_0); + + wait_for_dc_servo(codec); + + /* Apply correction to DC servo result */ + if (hubs->dcs_codes) { + dev_dbg(codec->dev, "Applying %d code DC servo correction\n", + hubs->dcs_codes); + + /* HPOUT1L */ + reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_1) & + WM8993_DCS_INTEG_CHAN_0_MASK;; + reg += hubs->dcs_codes; + dcs_cfg = reg << WM8993_DCS_DAC_WR_VAL_1_SHIFT; + + /* HPOUT1R */ + reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2) & + WM8993_DCS_INTEG_CHAN_1_MASK; + reg += hubs->dcs_codes; + dcs_cfg |= reg; + + /* Do it */ + snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg); + snd_soc_update_bits(codec, WM8993_DC_SERVO_0, + WM8993_DCS_TRIG_DAC_WR_0 | + WM8993_DCS_TRIG_DAC_WR_1, + WM8993_DCS_TRIG_DAC_WR_0 | + WM8993_DCS_TRIG_DAC_WR_1); + + wait_for_dc_servo(codec); + } +} + +/* * Update the DC servo calibration on gain changes */ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) + struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); int ret; @@ -251,6 +304,47 @@ SOC_SINGLE_TLV("LINEOUT2 Volume", WM8993_LINE_OUTPUTS_VOLUME, 0, 1, 1, line_tlv), }; +static int hp_supply_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm_hubs_data *hubs = codec->private_data; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + switch (hubs->hp_startup_mode) { + case 0: + break; + case 1: + /* Enable the headphone amp */ + snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1, + WM8993_HPOUT1L_ENA | + WM8993_HPOUT1R_ENA, + WM8993_HPOUT1L_ENA | + WM8993_HPOUT1R_ENA); + + /* Enable the second stage */ + snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0, + WM8993_HPOUT1L_DLY | + WM8993_HPOUT1R_DLY, + WM8993_HPOUT1L_DLY | + WM8993_HPOUT1R_DLY); + break; + default: + dev_err(codec->dev, "Unknown HP startup mode %d\n", + hubs->hp_startup_mode); + break; + } + + case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(codec, WM8993_CHARGE_PUMP_1, + WM8993_CP_ENA, 0); + break; + } + + return 0; +} + static int hp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -271,14 +365,11 @@ static int hp_event(struct snd_soc_dapm_widget *w, reg |= WM8993_HPOUT1L_DLY | WM8993_HPOUT1R_DLY; snd_soc_write(codec, WM8993_ANALOGUE_HP_0, reg); - /* Start the DC servo */ - snd_soc_update_bits(codec, WM8993_DC_SERVO_0, - 0xFFFF, - WM8993_DCS_ENA_CHAN_0 | - WM8993_DCS_ENA_CHAN_1 | - WM8993_DCS_TRIG_STARTUP_1 | - WM8993_DCS_TRIG_STARTUP_0); - wait_for_dc_servo(codec); + /* Smallest supported update interval */ + snd_soc_update_bits(codec, WM8993_DC_SERVO_1, + WM8993_DCS_TIMER_PERIOD_01_MASK, 1); + + calibrate_dc_servo(codec); reg |= WM8993_HPOUT1R_OUTP | WM8993_HPOUT1R_RMV_SHORT | WM8993_HPOUT1L_OUTP | WM8993_HPOUT1L_RMV_SHORT; @@ -286,23 +377,19 @@ static int hp_event(struct snd_soc_dapm_widget *w, break; case SND_SOC_DAPM_PRE_PMD: - reg &= ~(WM8993_HPOUT1L_RMV_SHORT | - WM8993_HPOUT1L_DLY | - WM8993_HPOUT1L_OUTP | - WM8993_HPOUT1R_RMV_SHORT | - WM8993_HPOUT1R_DLY | - WM8993_HPOUT1R_OUTP); + snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0, + WM8993_HPOUT1L_DLY | + WM8993_HPOUT1R_DLY | + WM8993_HPOUT1L_RMV_SHORT | + WM8993_HPOUT1R_RMV_SHORT, 0); - snd_soc_update_bits(codec, WM8993_DC_SERVO_0, - 0xffff, 0); + snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0, + WM8993_HPOUT1L_OUTP | + WM8993_HPOUT1R_OUTP, 0); - snd_soc_write(codec, WM8993_ANALOGUE_HP_0, reg); snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1, WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA, 0); - - snd_soc_update_bits(codec, WM8993_CHARGE_PUMP_1, - WM8993_CP_ENA, 0); break; } @@ -473,6 +560,8 @@ SND_SOC_DAPM_MIXER("Right Output Mixer", WM8993_POWER_MANAGEMENT_3, 4, 0, SND_SOC_DAPM_PGA("Left Output PGA", WM8993_POWER_MANAGEMENT_3, 7, 0, NULL, 0), SND_SOC_DAPM_PGA("Right Output PGA", WM8993_POWER_MANAGEMENT_3, 6, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("Headphone Supply", SND_SOC_NOPM, 0, 0, hp_supply_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA_E("Headphone PGA", SND_SOC_NOPM, 0, 0, NULL, 0, hp_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), @@ -626,6 +715,7 @@ static const struct snd_soc_dapm_route analogue_routes[] = { { "Headphone PGA", NULL, "Left Headphone Mux" }, { "Headphone PGA", NULL, "Right Headphone Mux" }, { "Headphone PGA", NULL, "CLK_SYS" }, + { "Headphone PGA", NULL, "Headphone Supply" }, { "HPOUT1L", NULL, "Headphone PGA" }, { "HPOUT1R", NULL, "Headphone PGA" }, diff --git a/sound/soc/codecs/wm_hubs.h b/sound/soc/codecs/wm_hubs.h index 36d3fba1de8..420104fe9c9 100644 --- a/sound/soc/codecs/wm_hubs.h +++ b/sound/soc/codecs/wm_hubs.h @@ -18,6 +18,12 @@ struct snd_soc_codec; extern const unsigned int wm_hubs_spkmix_tlv[]; +/* This *must* be the first element of the codec->private_data struct */ +struct wm_hubs_data { + int dcs_codes; + int hp_startup_mode; +}; + extern int wm_hubs_add_analogue_controls(struct snd_soc_codec *); extern int wm_hubs_add_analogue_routes(struct snd_soc_codec *, int, int); extern int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *, |