diff options
| -rw-r--r-- | arch/mips/au1000/common/platform.c | 57 | ||||
| -rw-r--r-- | drivers/serial/8250_au1x00.c | 100 | ||||
| -rw-r--r-- | drivers/serial/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/serial/Makefile | 1 |
4 files changed, 61 insertions, 105 deletions
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index c1c860c6a6e..7167972b127 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -3,16 +3,65 @@ * * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> * + * (C) Copyright Embedded Alley Solutions, Inc 2005 + * Author: Pantelis Antoniou <pantelis@embeddedalley.com> + * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include <linux/platform_device.h> +#include <linux/serial_8250.h> #include <linux/init.h> #include <asm/mach-au1x00/au1xxx.h> +#define PORT(_base, _irq) \ + { \ + .iobase = _base, \ + .membase = (void __iomem *)_base,\ + .mapbase = CPHYSADDR(_base), \ + .irq = _irq, \ + .regshift = 2, \ + .iotype = UPIO_AU, \ + .flags = UPF_SKIP_TEST \ + } + +static struct plat_serial8250_port au1x00_uart_data[] = { +#if defined(CONFIG_SERIAL_8250_AU1X00) +#if defined(CONFIG_SOC_AU1000) + PORT(UART0_ADDR, AU1000_UART0_INT), + PORT(UART1_ADDR, AU1000_UART1_INT), + PORT(UART2_ADDR, AU1000_UART2_INT), + PORT(UART3_ADDR, AU1000_UART3_INT), +#elif defined(CONFIG_SOC_AU1500) + PORT(UART0_ADDR, AU1500_UART0_INT), + PORT(UART3_ADDR, AU1500_UART3_INT), +#elif defined(CONFIG_SOC_AU1100) + PORT(UART0_ADDR, AU1100_UART0_INT), + PORT(UART1_ADDR, AU1100_UART1_INT), + PORT(UART3_ADDR, AU1100_UART3_INT), +#elif defined(CONFIG_SOC_AU1550) + PORT(UART0_ADDR, AU1550_UART0_INT), + PORT(UART1_ADDR, AU1550_UART1_INT), + PORT(UART3_ADDR, AU1550_UART3_INT), +#elif defined(CONFIG_SOC_AU1200) + PORT(UART0_ADDR, AU1200_UART0_INT), + PORT(UART1_ADDR, AU1200_UART1_INT), +#endif +#endif /* CONFIG_SERIAL_8250_AU1X00 */ + { }, +}; + +static struct platform_device au1xx0_uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_AU1X00, + .dev = { + .platform_data = au1x00_uart_data, + }, +}; + /* OHCI (USB full speed host controller) */ static struct resource au1xxx_usb_ohci_resources[] = { [0] = { @@ -287,6 +336,7 @@ static struct platform_device pbdb_smbus_device = { #endif static struct platform_device *au1xxx_platform_devices[] __initdata = { + &au1xx0_uart_device, &au1xxx_usb_ohci_device, &au1x00_pcmcia_device, #ifdef CONFIG_FB_AU1100 @@ -310,6 +360,13 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { int __init au1xxx_platform_init(void) { + unsigned int uartclk = get_au1x00_uart_baud_base() * 16; + int i; + + /* Fill up uartclk. */ + for (i = 0; au1x00_uart_data[i].flags ; i++) + au1x00_uart_data[i].uartclk = uartclk; + return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices)); } diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c deleted file mode 100644 index 58015fd14be..00000000000 --- a/drivers/serial/8250_au1x00.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Serial Device Initialisation for Au1x00 - * - * (C) Copyright Embedded Alley Solutions, Inc 2005 - * Author: Pantelis Antoniou <pantelis@embeddedalley.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/module.h> -#include <linux/serial_core.h> -#include <linux/signal.h> -#include <linux/slab.h> -#include <linux/types.h> - -#include <linux/serial_8250.h> - -#include <asm/mach-au1x00/au1000.h> - -#include "8250.h" - -#define PORT(_base, _irq) \ - { \ - .iobase = _base, \ - .membase = (void __iomem *)_base,\ - .mapbase = CPHYSADDR(_base), \ - .irq = _irq, \ - .uartclk = 0, /* filled */ \ - .regshift = 2, \ - .iotype = UPIO_AU, \ - .flags = UPF_SKIP_TEST \ - } - -static struct plat_serial8250_port au1x00_data[] = { -#if defined(CONFIG_SOC_AU1000) - PORT(UART0_ADDR, AU1000_UART0_INT), - PORT(UART1_ADDR, AU1000_UART1_INT), - PORT(UART2_ADDR, AU1000_UART2_INT), - PORT(UART3_ADDR, AU1000_UART3_INT), -#elif defined(CONFIG_SOC_AU1500) - PORT(UART0_ADDR, AU1500_UART0_INT), - PORT(UART3_ADDR, AU1500_UART3_INT), -#elif defined(CONFIG_SOC_AU1100) - PORT(UART0_ADDR, AU1100_UART0_INT), - PORT(UART1_ADDR, AU1100_UART1_INT), - /* The internal UART2 does not exist on the AU1100 processor. */ - PORT(UART3_ADDR, AU1100_UART3_INT), -#elif defined(CONFIG_SOC_AU1550) - PORT(UART0_ADDR, AU1550_UART0_INT), - PORT(UART1_ADDR, AU1550_UART1_INT), - PORT(UART3_ADDR, AU1550_UART3_INT), -#elif defined(CONFIG_SOC_AU1200) - PORT(UART0_ADDR, AU1200_UART0_INT), - PORT(UART1_ADDR, AU1200_UART1_INT), -#endif - { }, -}; - -static struct platform_device au1x00_device = { - .name = "serial8250", - .id = PLAT8250_DEV_AU1X00, - .dev = { - .platform_data = au1x00_data, - }, -}; - -static int __init au1x00_init(void) -{ - int i; - unsigned int uartclk; - - /* get uart clock */ - uartclk = get_au1x00_uart_baud_base() * 16; - - /* fill up uartclk */ - for (i = 0; au1x00_data[i].flags ; i++) - au1x00_data[i].uartclk = uartclk; - - return platform_device_register(&au1x00_device); -} - -/* XXX: Yes, I know this doesn't yet work. */ -static void __exit au1x00_exit(void) -{ - platform_device_unregister(&au1x00_device); -} - -module_init(au1x00_init); -module_exit(au1x00_exit); - -MODULE_AUTHOR("Pantelis Antoniou <pantelis@embeddedalley.com>"); -MODULE_DESCRIPTION("8250 serial probe module for Au1x000 cards"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index f7cd9504d81..34b809e3b59 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -262,12 +262,12 @@ config SERIAL_8250_ACORN cards. If unsure, say N. config SERIAL_8250_AU1X00 - bool "AU1X00 serial port support" + bool "Au1x00 serial port support" depends on SERIAL_8250 != n && SOC_AU1X00 help - If you have an Au1x00 board and want to use the serial port, say Y - to this option. The driver can handle 1 or 2 serial ports. - If unsure, say N. + If you have an Au1x00 SOC based board and want to use the serial port, + say Y to this option. The driver can handle up to 4 serial ports, + depending on the SOC. If unsure, say N. config SERIAL_8250_RM9K bool "Support for MIPS RM9xxx integrated serial port" diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 3cbea549472..f02ff9fad01 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o -obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o |