diff options
728 files changed, 12880 insertions, 10775 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index deb6b489e4e..a07c0f366f9 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -21,25 +21,27 @@ Contact: Alan Stern <stern@rowland.harvard.edu> Description: Each USB device directory will contain a file named power/level. This file holds a power-level setting for - the device, one of "on", "auto", or "suspend". + the device, either "on" or "auto". "on" means that the device is not allowed to autosuspend, although normal suspends for system sleep will still be honored. "auto" means the device will autosuspend and autoresume in the usual manner, according to the - capabilities of its driver. "suspend" means the device - is forced into a suspended state and it will not autoresume - in response to I/O requests. However remote-wakeup requests - from the device may still be enabled (the remote-wakeup - setting is controlled separately by the power/wakeup - attribute). + capabilities of its driver. During normal use, devices should be left in the "auto" - level. The other levels are meant for administrative uses. + level. The "on" level is meant for administrative uses. If you want to suspend a device immediately but leave it free to wake up in response to I/O requests, you should write "0" to power/autosuspend. + Device not capable of proper suspend and resume should be + left in the "on" level. Although the USB spec requires + devices to support suspend/resume, many of them do not. + In fact so many don't that by default, the USB core + initializes all non-hub devices in the "on" level. Some + drivers may change this setting when they are bound. + What: /sys/bus/usb/devices/.../power/persist Date: May 2007 KernelVersion: 2.6.23 diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index f508a8a27fe..5e7d84b4850 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -174,7 +174,7 @@ </para> <programlisting> static struct mtd_info *board_mtd; -static unsigned long baseaddr; +static void __iomem *baseaddr; </programlisting> <para> Static example @@ -182,7 +182,7 @@ static unsigned long baseaddr; <programlisting> static struct mtd_info board_mtd; static struct nand_chip board_chip; -static unsigned long baseaddr; +static void __iomem *baseaddr; </programlisting> </sect1> <sect1 id="Partition_defines"> @@ -283,8 +283,8 @@ int __init board_init (void) } /* map physical address */ - baseaddr = (unsigned long)ioremap(CHIP_PHYSICAL_ADDRESS, 1024); - if(!baseaddr){ + baseaddr = ioremap(CHIP_PHYSICAL_ADDRESS, 1024); + if (!baseaddr) { printk("Ioremap to access NAND chip failed\n"); err = -EIO; goto out_mtd; @@ -316,7 +316,7 @@ int __init board_init (void) goto out; out_ior: - iounmap((void *)baseaddr); + iounmap(baseaddr); out_mtd: kfree (board_mtd); out: @@ -341,7 +341,7 @@ static void __exit board_cleanup (void) nand_release (board_mtd); /* unmap physical address */ - iounmap((void *)baseaddr); + iounmap(baseaddr); /* Free the MTD device structure */ kfree (board_mtd); diff --git a/Documentation/IO-mapping.txt b/Documentation/IO-mapping.txt index 78a440695e1..1b5aa10df84 100644 --- a/Documentation/IO-mapping.txt +++ b/Documentation/IO-mapping.txt @@ -157,7 +157,7 @@ For such memory, you can do things like * access only the 640k-1MB area, so anything else * has to be remapped. */ - char * baseptr = ioremap(0xFC000000, 1024*1024); + void __iomem *baseptr = ioremap(0xFC000000, 1024*1024); /* write a 'A' to the offset 10 of the area */ writeb('A',baseptr+10); diff --git a/Documentation/DMA-mapping.txt b/Documentation/PCI/PCI-DMA-mapping.txt index ecad88d9fe5..ecad88d9fe5 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/PCI/PCI-DMA-mapping.txt diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index 961a0513f8c..a406286f6f3 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -1,7 +1,5 @@ 00-INDEX - This file -as-iosched.txt - - Anticipatory IO scheduler barrier.txt - I/O Barriers biodoc.txt diff --git a/Documentation/block/as-iosched.txt b/Documentation/block/as-iosched.txt deleted file mode 100644 index 738b72be128..00000000000 --- a/Documentation/block/as-iosched.txt +++ /dev/null @@ -1,172 +0,0 @@ -Anticipatory IO scheduler -------------------------- -Nick Piggin <piggin@cyberone.com.au> 13 Sep 2003 - -Attention! Database servers, especially those using "TCQ" disks should -investigate performance with the 'deadline' IO scheduler. Any system with high -disk performance requirements should do so, in fact. - -If you see unusual performance characteristics of your disk systems, or you -see big performance regressions versus the deadline scheduler, please email -me. Database users don't bother unless you're willing to test a lot of patches -from me ;) its a known issue. - -Also, users with hardware RAID controllers, doing striping, may find -highly variable performance results with using the as-iosched. The -as-iosched anticipatory implementation is based on the notion that a disk -device has only one physical seeking head. A striped RAID controller -actually has a head for each physical device in the logical RAID device. - -However, setting the antic_expire (see tunable parameters below) produces -very similar behavior to the deadline IO scheduler. - -Selecting IO schedulers ------------------------ -Refer to Documentation/block/switching-sched.txt for information on -selecting an io scheduler on a per-device basis. - -Anticipatory IO scheduler Policies ----------------------------------- -The as-iosched implementation implements several layers of policies -to determine when an IO request is dispatched to the disk controller. -Here are the policies outlined, in order of application. - -1. one-way Elevator algorithm. - -The elevator algorithm is similar to that used in deadline scheduler, with -the addition that it allows limited backward movement of the elevator -(i.e. seeks backwards). A seek backwards can occur when choosing between -two IO requests where one is behind the elevator's current position, and -the other is in front of the elevator's position. If the seek distance to -the request in back of the elevator is less than half the seek distance to -the request in front of the elevator, then the request in back can be chosen. -Backward seeks are also limited to a maximum of MAXBACK (1024*1024) sectors. -This favors forward movement of the elevator, while allowing opportunistic -"short" backward seeks. - -2. FIFO expiration times for reads and for writes. - -This is again very similar to the deadline IO scheduler. The expiration -times for requests on these lists is tunable using the parameters read_expire -and write_expire discussed below. When a read or a write expires in this way, -the IO scheduler will interrupt its current elevator sweep or read anticipation -to service the expired request. - -3. Read and write request batching - -A batch is a collection of read requests or a collection of write -requests. The as scheduler alternates dispatching read and write batches -to the driver. In the case a read batch, the scheduler submits read -requests to the driver as long as there are read requests to submit, and -the read batch time limit has not been exceeded (read_batch_expire). -The read batch time limit begins counting down only when there are -competing write requests pending. - -In the case of a write batch, the scheduler submits write requests to -the driver as long as there are write requests available, and the -write batch time limit has not been exceeded (write_batch_expire). -However, the length of write batches will be gradually shortened -when read batches frequently exceed their time limit. - -When changing between batch types, the scheduler waits for all requests -from the previous batch to complete before scheduling requests for the -next batch. - -The read and write fifo expiration times described in policy 2 above -are checked only when in scheduling IO of a batch for the corresponding -(read/write) type. So for example, the read FIFO timeout values are -tested only during read batches. Likewise, the write FIFO timeout -values are tested only during write batches. For this reason, -it is generally not recommended for the read batch time -to be longer than the write expiration time, nor for the write batch -time to exceed the read expiration time (see tunable parameters below). - -When the IO scheduler changes from a read to a write batch, -it begins the elevator from the request that is on the head of the -write expiration FIFO. Likewise, when changing from a write batch to -a read batch, scheduler begins the elevator from the first entry -on the read expiration FIFO. - -4. Read anticipation. - -Read anticipation occurs only when scheduling a read batch. -This implementation of read anticipation allows only one read request -to be dispatched to the disk controller at a time. In -contrast, many write requests may be dispatched to the disk controller -at a time during a write batch. It is this characteristic that can make -the anticipatory scheduler perform anomalously with controllers supporting -TCQ, or with hardware striped RAID devices. Setting the antic_expire -queue parameter (see below) to zero disables this behavior, and the -anticipatory scheduler behaves essentially like the deadline scheduler. - -When read anticipation is enabled (antic_expire is not zero), reads -are dispatched to the disk controller one at a time. -At the end of each read request, the IO scheduler examines its next -candidate read request from its sorted read list. If that next request -is from the same process as the request that just completed, -or if the next request in the queue is "very close" to the -just completed request, it is dispatched immediately. Otherwise, -statistics (average think time, average seek distance) on the process -that submitted the just completed request are examined. If it seems -likely that that process will submit another request soon, and that -request is likely to be near the just completed request, then the IO -scheduler will stop dispatching more read requests for up to (antic_expire) -milliseconds, hoping that process will submit a new request near the one -that just completed. If such a request is made, then it is dispatched -immediately. If the antic_expire wait time expires, then the IO scheduler -will dispatch the next read request from the sorted read queue. - -To decide whether an anticipatory wait is worthwhile, the scheduler -maintains statistics for each process that can be used to compute -mean "think time" (the time between read requests), and mean seek -distance for that process. One observation is that these statistics -are associated with each process, but those statistics are not associated -with a specific IO device. So for example, if a process is doing IO -on several file systems on separate devices, the statistics will be -a combination of IO behavior from all those devices. - - -Tuning the anticipatory IO scheduler ------------------------------------- -When using 'as', the anticipatory IO scheduler there are 5 parameters under -/sys/block/*/queue/iosched/. All are units of milliseconds. - -The parameters are: -* read_expire - Controls how long until a read request becomes "expired". It also controls the - interval between which expired requests are served, so set to 50, a request - might take anywhere < 100ms to be serviced _if_ it is the next on the - expired list. Obviously request expiration strategies won't make the disk - go faster. The result basically equates to the timeslice a single reader - gets in the presence of other IO. 100*((seek time / read_expire) + 1) is - very roughly the % streaming read efficiency your disk should get with - multiple readers. - -* read_batch_expire - Controls how much time a batch of reads is given before pending writes are - served. A higher value is more efficient. This might be set below read_expire - if writes are to be given higher priority than reads, but reads are to be - as efficient as possible when there are no writes. Generally though, it - should be some multiple of read_expire. - -* write_expire, and -* write_batch_expire are equivalent to the above, for writes. - -* antic_expire - Controls the maximum amount of time we can anticipate a good read (one - with a short seek distance from the most recently completed request) before - giving up. Many other factors may cause anticipation to be stopped early, - or some processes will not be "anticipated" at all. Should be a bit higher - for big seek time devices though not a linear correspondence - most - processes have only a few ms thinktime. - -In addition to the tunables above there is a read-only file named est_time -which, when read, will show: - - - The probability of a task exiting without a cooperating task - submitting an anticipated IO. - - - The current mean think time. - - - The seek distance used to determine if an incoming IO is better. - diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 8d2158a1c6a..6fab97ea7e6 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to Documentation/DMA-mapping.txt for a discussion +Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion on PCI high mem DMA aspects and mapping of scatter gather lists, and support for 64 bit PCI. diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt index 60120fb3b96..d2cd6fb8ba9 100644 --- a/Documentation/driver-model/driver.txt +++ b/Documentation/driver-model/driver.txt @@ -226,5 +226,5 @@ struct driver_attribute driver_attr_debug; This can then be used to add and remove the attribute from the driver's directory using: -int driver_create_file(struct device_driver *, struct driver_attribute *); -void driver_remove_file(struct device_driver *, struct driver_attribute *); +int driver_create_file(struct device_driver *, const struct driver_attribute *); +void driver_remove_file(struct device_driver *, const struct driver_attribute *); diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index af6885c3c82..e1def1786e5 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -196,7 +196,7 @@ nobarrier This also requires an IO stack which can support also be used to enable or disable barriers, for consistency with other ext4 mount options. -inode_readahead=n This tuning parameter controls the maximum +inode_readahead_blks=n This tuning parameter controls the maximum number of inode table blocks that ext4's inode table readahead algorithm will pre-read into the buffer cache. The default value is 32 blocks. diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index b245d524d56..931c806642c 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -91,8 +91,8 @@ struct device_attribute { const char *buf, size_t count); }; -int device_create_file(struct device *, struct device_attribute *); -void device_remove_file(struct device *, struct device_attribute *); +int device_create_file(struct device *, const struct device_attribute *); +void device_remove_file(struct device *, const struct device_attribute *); It also defines this helper for defining device attributes: @@ -316,8 +316,8 @@ DEVICE_ATTR(_name, _mode, _show, _store); Creation/Removal: -int device_create_file(struct device *device, struct device_attribute * attr); -void device_remove_file(struct device * dev, struct device_attribute * attr); +int device_create_file(struct device *dev, const struct device_attribute * attr); +void device_remove_file(struct device *dev, const struct device_attribute * attr); - bus drivers (include/linux/device.h) @@ -358,7 +358,7 @@ DRIVER_ATTR(_name, _mode, _show, _store) Creation/Removal: -int driver_create_file(struct device_driver *, struct driver_attribute *); -void driver_remove_file(struct device_driver *, struct driver_attribute *); +int driver_create_file(struct device_driver *, const struct driver_attribute *); +void driver_remove_file(struct device_driver *, const struct driver_attribute *); diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 5ba4d9dff11..736d4560288 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -240,7 +240,7 @@ and is between 256 and 4096 characters. It is defined in the file acpi_sleep= [HW,ACPI] Sleep options Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, - old_ordering, s4_nonvs } + old_ordering, s4_nonvs, sci_force_enable } See Documentation/power/video.txt for information on s3_bios and s3_mode. s3_beep is for debugging; it makes the PC's speaker beep @@ -253,6 +253,9 @@ and is between 256 and 4096 characters. It is defined in the file of _PTS is used by default). s4_nonvs prevents the kernel from saving/restoring the ACPI NVS memory during hibernation. + sci_force_enable causes the kernel to set SCI_EN directly + on resume from S1/S3 (which is against the ACPI spec, + but some broken systems don't work without it). acpi_use_timer_override [HW,ACPI] Use timer override. For some broken Nvidia NF5 boards diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt index e1a11416102..2811e452f75 100644 --- a/Documentation/kvm/api.txt +++ b/Documentation/kvm/api.txt @@ -685,7 +685,7 @@ struct kvm_vcpu_events { __u8 pad; } nmi; __u32 sipi_vector; - __u32 flags; /* must be zero */ + __u32 flags; }; 4.30 KVM_SET_VCPU_EVENTS @@ -701,6 +701,14 @@ vcpu. See KVM_GET_VCPU_EVENTS for the data structure. +Fields that may be modified asynchronously by running VCPUs can be excluded +from the update. These fields are nmi.pending and sipi_vector. Keep the +corresponding bits in the flags field cleared to suppress overwriting the +current in-kernel state. The bits are: + +KVM_VCPUEVENT_VALID_NMI_PENDING - transfer nmi.pending to the kernel +KVM_VCPUEVENT_VALID_SIPI_VECTOR - transfer sipi_vector + 5. The kvm_run structure diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 169091f75e6..75afa1229fd 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1092,8 +1092,8 @@ WARNING: its level up and down at every change. -Volume control --------------- +Volume control (Console Audio control) +-------------------------------------- procfs: /proc/acpi/ibm/volume ALSA: "ThinkPad Console Audio Control", default ID: "ThinkPadEC" @@ -1110,9 +1110,53 @@ the desktop environment to just provide on-screen-display feedback. Software volume control should be done only in the main AC97/HDA mixer. -This feature allows volume control on ThinkPad models with a digital -volume knob (when available, not all models have it), as well as -mute/unmute control. The available commands are: + +About the ThinkPad Console Audio control: + +ThinkPads have a built-in amplifier and muting circuit that drives the +console headphone and speakers. This circuit is after the main AC97 +or HDA mixer in the audio path, and under exclusive control of the +firmware. + +ThinkPads have three special hotkeys to interact with the console +audio control: volume up, volume down and mute. + +It is worth noting that the normal way the mute function works (on +ThinkPads that do not have a "mute LED") is: + +1. Press mute to mute. It will *always* mute, you can press it as + many times as you want, and the sound will remain mute. + +2. Press either volume key to unmute the ThinkPad (it will _not_ + change the volume, it will just unmute). + +This is a very superior design when compared to the cheap software-only +mute-toggle solution found on normal consumer laptops: you can be +absolutely sure the ThinkPad will not make noise if you press the mute +button, no matter the previous state. + +The IBM ThinkPads, and the earlier Lenovo ThinkPads have variable-gain +amplifiers driving the speakers and headphone output, and the firmware +also handles volume control for the headphone and speakers on these +ThinkPads without any help from the operating system (this volume +control stage exists after the main AC97 or HDA mixer in the audio +path). + +The newer Lenovo models only have firmware mute control, and depend on +the main HDA mixer to do volume control (which is done by the operating +system). In this case, the volume keys are filtered out for unmute +key press (there are some firmware bugs in this area) and delivered as +normal key presses to the operating system (thinkpad-acpi is not +involved). + + +The ThinkPad-ACPI volume control: + +The preferred way to interact with the Console Audio control is the +ALSA interface. + +The legacy procfs interface allows one to read the current state, +and if volume control is enabled, accepts the following commands: echo up >/proc/acpi/ibm/volume echo down >/proc/acpi/ibm/volume @@ -1121,12 +1165,10 @@ mute/unmute control. The available commands are: echo 'level <level>' >/proc/acpi/ibm/volume The <level> number range is 0 to 14 although not all of them may be -distinct. The unmute the volume after the mute command, use either the +distinct. To unmute the volume after the mute command, use either the up or down command (the level command will not unmute the volume), or the unmute command. -The current volume level and mute state is shown in the file. - You can use the volume_capabilities parameter to tell the driver whether your thinkpad has volume control or mute-only control: volume_capabilities=1 for mixers with mute and volume control, diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index e93affff3af..e72cee9e2a7 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -403,4 +403,5 @@ STAC9872 Cirrus Logic CS4206/4207 ======================== mbp55 MacBook Pro 5,5 + imac27 IMac 27 Inch auto BIOS setup (default) diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt index 719a819f8cc..07301de12cc 100644 --- a/Documentation/sound/alsa/Procfile.txt +++ b/Documentation/sound/alsa/Procfile.txt @@ -95,7 +95,7 @@ card*/pcm*/xrun_debug It takes an integer value, can be changed by writing to this file, such as - # cat 5 > /proc/asound/card0/pcm0p/xrun_debug + # echo 5 > /proc/asound/card0/pcm0p/xrun_debug The value consists of the following bit flags: bit 0 = Enable XRUN/jiffies debug messages diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt index a452227361b..5effa5bd993 100644 --- a/Documentation/stable_kernel_rules.txt +++ b/Documentation/stable_kernel_rules.txt @@ -26,13 +26,33 @@ Procedure for submitting patches to the -stable tree: - Send the patch, after verifying that it follows the above rules, to stable@kernel.org. + - To have the patch automatically included in the stable tree, add the + the tag + Cc: stable@kernel.org + in the sign-off area. Once the patch is merged it will be applied to + the stable tree without anything else needing to be done by the author + or subsystem maintainer. + - If the patch requires other patches as prerequisites which can be + cherry-picked than this can be specified in the following format in + the sign-off area: + + Cc: <stable@kernel.org> # .32.x: a1f84a3: sched: Check for idle + Cc: <stable@kernel.org> # .32.x: 1b9508f: sched: Rate-limit newidle + Cc: <stable@kernel.org> # .32.x: fd21073: sched: Fix affinity logic + Cc: <stable@kernel.org> # .32.x + Signed-off-by: Ingo Molnar <mingo@elte.hu> + + The tag sequence has the meaning of: + git cherry-pick a1f84a3 + git cherry-pick 1b9508f + git cherry-pick fd21073 + git cherry-pick <this commit> + - The sender will receive an ACK when the patch has been accepted into the queue, or a NAK if the patch is rejected. This response might take a few days, according to the developer's schedules. - If accepted, the patch will be added to the -stable queue, for review by other developers and by the relevant subsystem maintainer. - - If the stable@kernel.org address is added to a patch, when it goes into - Linus's tree it will automatically be emailed to the stable team. - Security patches should not be sent to this alias, but instead to the documented security@kernel.org address. diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt index 641a1ef2a7f..239f14b2b55 100644 --- a/Documentation/trace/ftrace-design.txt +++ b/Documentation/trace/ftrace-design.txt @@ -53,14 +53,14 @@ size of the mcount call that is embedded in the function). For example, if the function foo() calls bar(), when the bar() function calls mcount(), the arguments mcount() will pass to the tracer are: "frompc" - the address bar() will use to return to foo() - "selfpc" - the address bar() (with _mcount() size adjustment) + "selfpc" - the address bar() (with mcount() size adjustment) Also keep in mind that this mcount function will be called *a lot*, so optimizing for the default case of no tracer will help the smooth running of your system when tracing is disabled. So the start of the mcount function is -typically the bare min with checking things before returning. That also means -the code flow should usually kept linear (i.e. no branching in the nop case). -This is of course an optimization and not a hard requirement. +typically the bare minimum with checking things before returning. That also +means the code flow should usually be kept linear (i.e. no branching in the nop +case). This is of course an optimization and not a hard requirement. Here is some pseudo code that should help (these functions should actually be implemented in assembly): @@ -131,10 +131,10 @@ some functions to save (hijack) and restore the return address. The mcount function should check the function pointers ftrace_graph_return (compare to ftrace_stub) and ftrace_graph_entry (compare to -ftrace_graph_entry_stub). If either of those are not set to the relevant stub +ftrace_graph_entry_stub). If either of those is not set to the relevant stub function, call the arch-specific function ftrace_graph_caller which in turn calls the arch-specific function prepare_ftrace_return. Neither of these -function names are strictly required, but you should use them anyways to stay +function names is strictly required, but you should use them anyway to stay consistent across the architecture ports -- easier to compare & contrast things. @@ -144,7 +144,7 @@ but the first argument should be a pointer to the "frompc". Typically this is located on the stack. This allows the function to hijack the return address temporarily to have it point to the arch-specific function return_to_handler. That function will simply call the common ftrace_return_to_handler function and -that will return the original return address with which, you can return to the +that will return the original return address with which you can return to the original call site. Here is the updated mcount pseudo code: diff --git a/Documentation/trace/mmiotrace.txt b/Documentation/trace/mmiotrace.txt index 162effbfbde..664e7386d89 100644 --- a/Documentation/trace/mmiotrace.txt +++ b/Documentation/trace/mmiotrace.txt @@ -44,7 +44,8 @@ Check for lost events. Usage ----- -Make sure debugfs is mounted to /sys/kernel/debug. If not, (requires root privileges) +Make sure debugfs is mounted to /sys/kernel/debug. +If not (requires root privileges): $ mount -t debugfs debugfs /sys/kernel/debug Check that the driver you are about to trace is not loaded. @@ -91,7 +92,7 @@ $ dmesg > dmesg.txt $ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt and then send the .tar.gz file. The trace compresses considerably. Replace "pciid" and "nick" with the PCI ID or model name of your piece of hardware -under investigation and your nick name. +under investigation and your nickname. How Mmiotrace Works @@ -100,7 +101,7 @@ How Mmiotrace Works Access to hardware IO-memory is gained by mapping addresses from PCI bus by calling one of the ioremap_*() functions. Mmiotrace is hooked into the __ioremap() function and gets called whenever a mapping is created. Mapping is -an event that is recorded into the trace log. Note, that ISA range mappings +an event that is recorded into the trace log. Note that ISA range mappings are not caught, since the mapping always exists and is returned directly. MMIO accesses are recorded via page faults. Just before __ioremap() returns, @@ -122,11 +123,11 @@ Trace Log Format ---------------- The raw log is text and easily filtered with e.g. grep and awk. One record is -one line in the log. A record starts with a keyword, followed by keyword -dependant arguments. Arguments are separated by a space, or continue until the +one line in the log. A record starts with a keyword, followed by keyword- +dependent arguments. Arguments are separated by a space, or continue until the end of line. The format for version 20070824 is as follows: -Explanation Keyword Space separated arguments +Explanation Keyword Space-separated arguments --------------------------------------------------------------------------- read event R width, timestamp, map id, physical, value, PC, PID @@ -136,7 +137,7 @@ iounmap event UNMAP timestamp, map id, PC, PID marker MARK timestamp, text version VERSION the string "20070824" info for reader LSPCI one line from lspci -v -PCI address map PCIDEV space separated /proc/bus/pci/devices data +PCI address map PCIDEV space-separated /proc/bus/pci/devices data unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual diff --git a/Documentation/trace/tracepoint-analysis.txt b/Documentation/trace/tracepoint-analysis.txt index 5eb4e487e66..87bee3c129b 100644 --- a/Documentation/trace/tracepoint-analysis.txt +++ b/Documentation/trace/tracepoint-analysis.txt @@ -10,8 +10,8 @@ Tracepoints (see Documentation/trace/tracepoints.txt) can be used without creating custom kernel modules to register probe functions using the event tracing infrastructure. -Simplistically, tracepoints will represent an important event that when can -be taken in conjunction with other tracepoints to build a "Big Picture" of +Simplistically, tracepoints represent important events that can be +taken in conjunction with other tracepoints to build a "Big Picture" of what is going on within the system. There are a large number of methods for gathering and interpreting these events. Lacking any current Best Practises, this document describes some of the methods that can be used. @@ -33,12 +33,12 @@ calling will give a fair indication of the number of events available. -2.2 PCL +2.2 PCL (Performance Counters for Linux) ------- -Discovery and enumeration of all counters and events, including tracepoints +Discovery and enumeration of all counters and events, including tracepoints, are available with the perf tool. Getting a list of available events is a -simple case of +simple case of: $ perf list 2>&1 | grep Tracepoint ext4:ext4_free_inode [Tracepoint event] @@ -49,19 +49,19 @@ simple case of [ .... remaining output snipped .... ] -2. Enabling Events +3. Enabling Events ================== -2.1 System-Wide Event Enabling +3.1 System-Wide Event Enabling ------------------------------ See Documentation/trace/events.txt for a proper description on how events can be enabled system-wide. A short example of enabling all events related -to page allocation would look something like +to page allocation would look something like: $ for i in `find /sys/kernel/debug/tracing/events -name "enable" | grep mm_`; do echo 1 > $i; done -2.2 System-Wide Event Enabling with SystemTap +3.2 System-Wide Event Enabling with SystemTap --------------------------------------------- In SystemTap, tracepoints are accessible using the kernel.trace() function @@ -86,7 +86,7 @@ were allocating the pages. print_count() } -2.3 System-Wide Event Enabling with PCL +3.3 System-Wide Event Enabling with PCL --------------------------------------- By specifying the -a switch and analysing sleep, the system-wide events @@ -107,16 +107,16 @@ for a duration of time can be examined. Similarly, one could execute a shell and exit it as desired to get a report at that point. -2.4 Local Event Enabling +3.4 Local Event Enabling ------------------------ Documentation/trace/ftrace.txt describes how to enable events on a per-thread basis using set_ftrace_pid. -2.5 Local Event Enablement with PCL +3.5 Local Event Enablement with PCL ----------------------------------- -Events can be activate and tracked for the duration of a process on a local +Events can be activated and tracked for the duration of a process on a local basis using PCL such as follows. $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ @@ -131,18 +131,18 @@ basis using PCL such as follows. 0.973913387 seconds time elapsed -3. Event Filtering +4. Event Filtering ================== Documentation/trace/ftrace.txt covers in-depth how to filter events in ftrace. Obviously using grep and awk of trace_pipe is an option as well as any script reading trace_pipe. -4. Analysing Event Variances with PCL +5. Analysing Event Variances with PCL ===================================== Any workload can exhibit variances between runs and it can be important -to know what the standard deviation in. By and large, this is left to the +to know what the standard deviation is. By and large, this is left to the performance analyst to do it by hand. In the event that the discrete event occurrences are useful to the performance analyst, then perf can be used. @@ -166,7 +166,7 @@ In the event that some higher-level event is required that depends on some aggregation of discrete events, then a script would need to be developed. Using --repeat, it is also possible to view how events are fluctuating over -time on a system wide basis using -a and sleep. +time on a system-wide basis using -a and sleep. $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ -e kmem:mm_pagevec_free \ @@ -180,7 +180,7 @@ time on a system wide basis using -a and sleep. 1.002251757 seconds time elapsed ( +- 0.005% ) -5. Higher-Level Analysis with Helper Scripts +6. Higher-Level Analysis with Helper Scripts ============================================ When events are enabled the events that are triggering can be read from @@ -190,11 +190,11 @@ be gathered on-line as appropriate. Examples of post-processing might include o Reading information from /proc for the PID that triggered the event o Deriving a higher-level event from a series of lower-level events. - o Calculate latencies between two events + o Calculating latencies between two events Documentation/trace/postprocess/trace-pagealloc-postprocess.pl is an example script that can read trace_pipe from STDIN or a copy of a trace. When used -on-line, it can be interrupted once to generate a report without existing +on-line, it can be interrupted once to generate a report without exiting and twice to exit. Simplistically, the script just reads STDIN and counts up events but it @@ -212,12 +212,12 @@ also can do more such as processes, the parent process responsible for creating all the helpers can be identified -6. Lower-Level Analysis with PCL +7. Lower-Level Analysis with PCL ================================ -There may also be a requirement to identify what functions with a program +There may also be a requirement to identify what functions within a program were generating events within the kernel. To begin this sort of analysis, the -data must be recorded. At the time of writing, this required root +data must be recorded. At the time of writing, this required root: $ perf record -c 1 \ -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ @@ -253,11 +253,11 @@ perf report. # (For more details, try: perf report --sort comm,dso,symbol) # -According to this, the vast majority of events occured triggered on events -within the VDSO. With simple binaries, this will often be the case so lets +According to this, the vast majority of events triggered on events +within the VDSO. With simple binaries, this will often be the case so let's take a slightly different example. In the course of writing this, it was -noticed that X was generating an insane amount of page allocations so lets look -at it +noticed that X was generating an insane amount of page allocations so let's look +at it: $ perf record -c 1 -f \ -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ @@ -280,8 +280,8 @@ This was interrupted after a few seconds and # (For more details, try: perf report --sort comm,dso,symbol) # -So, almost half of the events are occuring in a library. To get an idea which -symbol. +So, almost half of the events are occurring in a library. To get an idea which +symbol: $ perf report --sort comm,dso,symbol # Samples: 27666 @@ -297,7 +297,7 @@ symbol. 0.01% Xorg /opt/gfx-test/lib/libpixman-1.so.0.13.1 [.] get_fast_path 0.00% Xorg [kernel] [k] ftrace_trace_userstack -To see where within the function pixmanFillsse2 things are going wrong +To see where within the function pixmanFillsse2 things are going wrong: $ perf annotate pixmanFillsse2 [ ... ] diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index c7c1dc2f801..3bf6818c8cf 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -71,12 +71,10 @@ being accessed through sysfs, then it definitely is idle. Forms of dynamic PM ------------------- -Dynamic suspends can occur in two ways: manual and automatic. -"Manual" means that the user has told the kernel to suspend a device, -whereas "automatic" means that the kernel has decided all by itself to -suspend a device. Automatic suspend is called "autosuspend" for -short. In general, a device won't be autosuspended unless it has been -idle for some minimum period of time, the so-called idle-delay time. +Dynamic suspends occur when the kernel decides to suspend an idle +device. This is called "autosuspend" for short. In general, a device +won't be autosuspended unless it has been idle for some minimum period +of time, the so-called idle-delay time. Of course, nothing the kernel does on its own initiative should prevent the computer or its devices from working properly. If a @@ -96,10 +94,11 @@ idle. We can categorize power management events in two broad classes: external and internal. External events are those triggered by some agent outside the USB stack: system suspend/resume (triggered by -userspace), manual dynamic suspend/resume (also triggered by -userspace), and remote wakeup (triggered by the device). Internal -events are those triggered within the USB stack: autosuspend and -autoresume. +userspace), manual dynamic resume (also triggered by userspace), and +remote wakeup (triggered by the device). Internal events are those +triggered within the USB stack: autosuspend and autoresume. Note that +all dynamic suspend events are internal; external agents are not +allowed to issue dynamic suspends. The user interface for dynamic PM @@ -145,9 +144,9 @@ relevant attribute files are: wakeup, level, and autosuspend. number of seconds the device should remain idle before the kernel will autosuspend it (the idle-delay time). The default is 2. 0 means to autosuspend as soon as - the device becomes idle, and -1 means never to - autosuspend. You can write a number to the file to - change the autosuspend idle-delay time. + the device becomes idle, and negative values mean + never to autosuspend. You can write a number to the + file to change the autosuspend idle-delay time. Writing "-1" to power/autosuspend and writing "on" to power/level do essentially the same thing -- they both prevent the device from being @@ -377,9 +376,9 @@ the device hasn't been idle for long enough, a delayed workqueue routine is automatically set up to carry out the operation when the autosuspend idle-delay has expired. -Autoresume attempts also can fail. This will happen if power/level is -set to "suspend" or if the device doesn't manage to resume properly. -Unlike autosuspend, there's no delay for an autoresume. +Autoresume attempts also can fail, although failure would mean that +the device is no longer present or operating properly. Unlike +autosuspend, there's no delay for an autoresume. Other parts of the driver interface @@ -527,13 +526,3 @@ succeed, it may still remain active and thus cause the system to resume as soon as the system suspend is complete. Or the remote wakeup may fail and get lost. Which outcome occurs depends on timing and on the hardware and firmware design. - -More interestingly, a device might undergo a manual resume or -autoresume during system suspend. With current kernels this shouldn't -happen, because manual resumes must be initiated by userspace and -autoresumes happen in response to I/O requests, but all user processes -and I/O should be quiescent during a system suspend -- thanks to the -freezer. However there are plans to do away with the freezer, which -would mean these things would become possible. If and when this comes -about, the USB core will carefully arrange matters so that either type -of resume will block until the entire system has resumed. diff --git a/Documentation/vgaarbiter.txt b/Documentation/vgaarbiter.txt index 987f9b0a5ec..43a9b0694fd 100644 --- a/Documentation/vgaarbiter.txt +++ b/Documentation/vgaarbiter.txt @@ -103,7 +103,7 @@ I.2 libpciaccess ---------------- To use the vga arbiter char device it was implemented an API inside the -libpciaccess library. One fieldd was added to struct pci_device (each device +libpciaccess library. One field was added to struct pci_device (each device on the system): /* the type of resource decoded by the device */ diff --git a/MAINTAINERS b/MAINTAINERS index d5244f1580b..c22d597e6ac 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1472,6 +1472,12 @@ L: linux-scsi@vger.kernel.org S: Supported F: drivers/scsi/fnic/ +CMPC ACPI DRIVER +M: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> +M: Daniel Oliveira Nascimento <don@syst.com.br> +S: Supported +F: drivers/platform/x86/classmate-laptop.c + CODA FILE SYSTEM M: Jan Harkes <jaharkes@cs.cmu.edu> M: coda@cs.cmu.edu @@ -2163,10 +2169,9 @@ F: drivers/hwmon/f75375s.c F: include/linux/f75375s.h FIREWIRE SUBSYSTEM -M: Kristian Hoegsberg <krh@redhat.com> M: Stefan Richter <stefanr@s5r6.in-berlin.de> L: linux1394-devel@lists.sourceforge.net -W: http://www.linux1394.org/ +W: http://ieee1394.wiki.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git S: Maintained F: drivers/firewire/ @@ -2699,22 +2704,14 @@ S: Supported F: drivers/idle/i7300_idle.c IEEE 1394 SUBSYSTEM -M: Ben Collins <ben.collins@ubuntu.com> M: Stefan Richter <stefanr@s5r6.in-berlin.de> L: linux1394-devel@lists.sourceforge.net -W: http://www.linux1394.org/ +W: http://ieee1394.wiki.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git -S: Maintained +S: Obsolete F: Documentation/debugging-via-ohci1394.txt F: drivers/ieee1394/ -IEEE 1394 RAW I/O DRIVER -M: Dan Dennedy <dan@dennedy.org> -M: Stefan Richter <stefanr@s5r6.in-berlin.de> -L: linux1394-devel@lists.sourceforge.net -S: Maintained -F: drivers/ieee1394/raw1394* - IEEE 802.15.4 SUBSYSTEM M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> M: Sergey Lapin <slapin@ossfans.org> @@ -3646,6 +3643,11 @@ W: http://0pointer.de/lennart/tchibo.html S: Maintained F: drivers/platform/x86/msi-laptop.c +MSI WMI SUPPORT +M: Anisse Astier <anisse@astier.eu> +S: Supported +F: drivers/platform/x86/msi-wmi.c + MULTIFUNCTION DEVICES (MFD) M: Samuel Ortiz <sameo@linux.intel.com> T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git @@ -3679,7 +3681,7 @@ F: include/linux/isicom.h MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER M: Felipe Balbi <felipe.balbi@nokia.com> L: linux-usb@vger.kernel.org -T: git git://gitorious.org/musb/mainline.git +T: git git://gitorious.org/usb/usb.git S: Maintained F: drivers/usb/musb/ @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 33 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index bc90364a96c..cc32c1e54a5 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -312,7 +312,7 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr, * we need to ensure that the data will be coherent * with user mappings. */ - __cpuc_flush_kernel_dcache_area(ptr, size); + __cpuc_flush_dcache_area(ptr, size); } free_safe_buffer(dev->archdata.dmabounce, buf); } diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig index 1cab4e79d36..6e32a85641a 100644 --- a/arch/arm/configs/acs5k_defconfig +++ b/arch/arm/configs/acs5k_defconfig @@ -187,7 +187,6 @@ CONFIG_MACH_ACS5K=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM922T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig index 8e3d084afd7..b34b1eabac3 100644 --- a/arch/arm/configs/acs5k_tiny_defconfig +++ b/arch/arm/configs/acs5k_tiny_defconfig @@ -186,7 +186,6 @@ CONFIG_MACH_ACS5K=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM922T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig index f7a272cb3da..64fe7f10c12 100644 --- a/arch/arm/configs/afeb9260_defconfig +++ b/arch/arm/configs/afeb9260_defconfig @@ -227,7 +227,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig index 5e68420f468..30927cac6a9 100644 --- a/arch/arm/configs/am200epdkit_defconfig +++ b/arch/arm/configs/am200epdkit_defconfig @@ -189,7 +189,6 @@ CONFIG_PXA25x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig index ad54e92dd43..abe9966781c 100644 --- a/arch/arm/configs/am3517_evm_defconfig +++ b/arch/arm/configs/am3517_evm_defconfig @@ -233,7 +233,6 @@ CONFIG_MACH_OMAP3517EVM=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig index e8f7380b67d..3b3a3775bbf 100644 --- a/arch/arm/configs/ams_delta_defconfig +++ b/arch/arm/configs/ams_delta_defconfig @@ -210,7 +210,6 @@ CONFIG_OMAP_ARM_150MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig index c66dd399e42..daa75bc98d4 100644 --- a/arch/arm/configs/assabet_defconfig +++ b/arch/arm/configs/assabet_defconfig @@ -101,7 +101,6 @@ CONFIG_SA1100_ASSABET=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig index bc6bd9f6174..b1ab50bee46 100644 --- a/arch/arm/configs/at91cap9adk_defconfig +++ b/arch/arm/configs/at91cap9adk_defconfig @@ -181,7 +181,6 @@ CONFIG_AT91_TIMER_HZ=100 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index c97e1022ada..1fffec86a11 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -130,7 +130,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index 9f7a99ace51..c846a795d1d 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -129,7 +129,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 98e2f3de4bc..472ea11eedf 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -188,7 +188,6 @@ CONFIG_AT91_TIMER_HZ=100 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 14945614239..4ecde429cf1 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -181,7 +181,6 @@ CONFIG_AT91_TIMER_HZ=100 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index 21599f3c627..9b792b60c7f 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -181,7 +181,6 @@ CONFIG_AT91_TIMER_HZ=100 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig index 7e018a04c31..64ce106d53e 100644 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ b/arch/arm/configs/at91sam9g20ek_defconfig @@ -187,7 +187,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index e2df81a3e80..90e48bfda16 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -179,7 +179,6 @@ CONFIG_AT91_TIMER_HZ=100 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig index a19e824cf7f..6315534976c 100644 --- a/arch/arm/configs/ateb9200_defconfig +++ b/arch/arm/configs/ateb9200_defconfig @@ -132,7 +132,6 @@ CONFIG_MACH_ATEB9200=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index f264846218a..b175b6b8feb 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -103,7 +103,6 @@ CONFIG_SA1100_BADGE4=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig index bcc0bac551a..1e12167c89b 100644 --- a/arch/arm/configs/bcmring_defconfig +++ b/arch/arm/configs/bcmring_defconfig @@ -181,7 +181,6 @@ CONFIG_BCM_ZRELADDR=0x8000 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig index 8448108347c..eef33de3ca1 100644 --- a/arch/arm/configs/cam60_defconfig +++ b/arch/arm/configs/cam60_defconfig @@ -196,7 +196,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig index d392833b31f..b6a70630678 100644 --- a/arch/arm/configs/carmeva_defconfig +++ b/arch/arm/configs/carmeva_defconfig @@ -97,7 +97,6 @@ CONFIG_MACH_CARMEVA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig index 2b4c0668b1b..d662cab9cc2 100644 --- a/arch/arm/configs/cerfcube_defconfig +++ b/arch/arm/configs/cerfcube_defconfig @@ -105,7 +105,6 @@ CONFIG_SA1100_CERF_FLASH_16MB=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig index e42c5c873eb..893cd267e07 100644 --- a/arch/arm/configs/cm_t35_defconfig +++ b/arch/arm/configs/cm_t35_defconfig @@ -236,7 +236,6 @@ CONFIG_MACH_CM_T35=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig index 797b790cba7..47d22d09e70 100644 --- a/arch/arm/configs/cm_x2xx_defconfig +++ b/arch/arm/configs/cm_x2xx_defconfig @@ -205,7 +205,6 @@ CONFIG_PXA_SSP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index a0170867130..a334069c790 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -247,7 +247,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSC3=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 4cf3bde1c52..c962870b3f8 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -204,7 +204,6 @@ CONFIG_PXA27x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig index 4774a36fa74..11fdb5afdec 100644 --- a/arch/arm/configs/colibri_pxa300_defconfig +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -212,7 +212,6 @@ CONFIG_PXA3xx=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSC3=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 1aa62249031..26e458d8263 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -125,7 +125,6 @@ CONFIG_SA1100_COLLIE=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index d6cd165e931..5e4069f4275 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -214,7 +214,6 @@ CONFIG_PXA_HAVE_BOARD_IRQS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig index 601e7f3d5e9..c9137aaf23a 100644 --- a/arch/arm/configs/cpu9260_defconfig +++ b/arch/arm/configs/cpu9260_defconfig @@ -229,7 +229,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig index b5b9cbbc697..d2344799171 100644 --- a/arch/arm/configs/cpu9g20_defconfig +++ b/arch/arm/configs/cpu9g20_defconfig @@ -219,7 +219,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig index 4901827253f..1f8dda6e37c 100644 --- a/arch/arm/configs/cpuat91_defconfig +++ b/arch/arm/configs/cpuat91_defconfig @@ -230,7 +230,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index 29f68c2effe..f095040dab0 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -193,7 +193,6 @@ CONFIG_AT91_TIMER_HZ=128 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index f7b60ceed6c..507154016fc 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -215,7 +215,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 50bd25a10f0..e14c99c2b57 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -225,7 +225,6 @@ CONFIG_DAVINCI_RESET_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index bd656e8e6e4..625035fd0a6 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -223,7 +223,6 @@ CONFIG_DAVINCI_RESET_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index b3a491675d5..b7b2ab088dd 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -186,7 +186,6 @@ CONFIG_PLAT_ORION=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig index afcfff6140f..d5e82796911 100644 --- a/arch/arm/configs/ebsa110_defconfig +++ b/arch/arm/configs/ebsa110_defconfig @@ -83,7 +83,6 @@ CONFIG_ARCH_EBSA110=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA110=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig index ca520733bdb..25dd53b7cef 100644 --- a/arch/arm/configs/ecbat91_defconfig +++ b/arch/arm/configs/ecbat91_defconfig @@ -186,7 +186,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/edb7211_defconfig b/arch/arm/configs/edb7211_defconfig index 6ba7355ff85..e3a6cd32669 100644 --- a/arch/arm/configs/edb7211_defconfig +++ b/arch/arm/configs/edb7211_defconfig @@ -90,7 +90,6 @@ CONFIG_ARCH_EP7211=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM720T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_LV4T=y diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig index e9955b786c8..2bee932439f 100644 --- a/arch/arm/configs/em_x270_defconfig +++ b/arch/arm/configs/em_x270_defconfig @@ -202,7 +202,6 @@ CONFIG_PXA_SSP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 3fb083b81b0..35d735ede9b 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -198,7 +198,6 @@ CONFIG_EP93XX_EARLY_UART1=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index b6c5cbbf4c8..74baf570929 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -203,7 +203,6 @@ CONFIG_PXA_HAVE_BOARD_IRQS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 492f29aba33..9e9057c5a2a 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -240,7 +240,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 6ace512fa10..04d97937afe 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -95,7 +95,6 @@ CONFIG_ARCH_EBSA285=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA110=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/fortunet_defconfig b/arch/arm/configs/fortunet_defconfig index 65dc73a88c4..d58142bf6fa 100644 --- a/arch/arm/configs/fortunet_defconfig +++ b/arch/arm/configs/fortunet_defconfig @@ -88,7 +88,6 @@ CONFIG_ARCH_FORTUNET=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM720T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_LV4T=y diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index efa78e144e5..a8ad8fbe118 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -205,7 +205,6 @@ CONFIG_SA1100_H3600=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig index 649baa37049..5bb73728fad 100644 --- a/arch/arm/configs/h5000_defconfig +++ b/arch/arm/configs/h5000_defconfig @@ -206,7 +206,6 @@ CONFIG_PXA25x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig index 116920aecef..09a6c6a27bd 100644 --- a/arch/arm/configs/h7201_defconfig +++ b/arch/arm/configs/h7201_defconfig @@ -87,7 +87,6 @@ CONFIG_CPU_H7201=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM720T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_LV4T=y diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig index 0e739af5271..fedc52bd22b 100644 --- a/arch/arm/configs/h7202_defconfig +++ b/arch/arm/configs/h7202_defconfig @@ -91,7 +91,6 @@ CONFIG_CPU_H7202=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM720T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_LV4T=y diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index db0708d5cbe..2da1acf41f4 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -103,7 +103,6 @@ CONFIG_SA1100_HACKKIT=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig index 1b39691b816..e0ef0d121aa 100644 --- a/arch/arm/configs/htcherald_defconfig +++ b/arch/arm/configs/htcherald_defconfig @@ -241,7 +241,6 @@ CONFIG_OMAP_ARM_195MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v4T=y diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig index c97f8d0ded4..a192248c6dd 100644 --- a/arch/arm/configs/igep0020_defconfig +++ b/arch/arm/configs/igep0020_defconfig @@ -238,7 +238,6 @@ CONFIG_MACH_IGEP0020=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 3ce96e60b40..6b0d0439563 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -92,7 +92,6 @@ CONFIG_ARCH_INTEGRATOR_AP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM720T=y CONFIG_CPU_ARM920T=y # CONFIG_CPU_ARM922T is not set diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index 89c17761726..3c040cc9f3b 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -163,7 +163,6 @@ CONFIG_PLAT_IOP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSC3=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index d70177b38f5..62a854996be 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -168,7 +168,6 @@ CONFIG_PLAT_IOP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index ed2d59d0182..0bc23ece4c2 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -198,7 +198,6 @@ CONFIG_PLAT_IOP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig index 57526c15e85..8b5b5764a22 100644 --- a/arch/arm/configs/ixp2000_defconfig +++ b/arch/arm/configs/ixp2000_defconfig @@ -151,7 +151,6 @@ CONFIG_ARCH_IXDP2X01=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig index ef97561ed75..59c11c93180 100644 --- a/arch/arm/configs/ixp23xx_defconfig +++ b/arch/arm/configs/ixp23xx_defconfig @@ -145,7 +145,6 @@ CONFIG_MACH_ROADRUNNER=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSC3=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 95cd8dfb5f1..a907ad50ad3 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -189,7 +189,6 @@ CONFIG_IXP4XX_NPE=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index df9bfbea861..d1f1646e23c 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -202,7 +202,6 @@ CONFIG_SA1100_SSP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index 9f92fc527f5..f661e765d9b 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -132,7 +132,6 @@ CONFIG_MACH_KAFA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index 605a8462f17..668ba59946d 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -230,7 +230,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index bcfade33bca..5fc44c94b0a 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -201,7 +201,6 @@ CONFIG_PLAT_ORION=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_FEROCEON=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_CPU_32v5=y diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig index d25c41bab06..e6f2276904f 100644 --- a/arch/arm/configs/ks8695_defconfig +++ b/arch/arm/configs/ks8695_defconfig @@ -186,7 +186,6 @@ CONFIG_MACH_DSM320=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM922T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig index 56ae56899d2..af759517693 100644 --- a/arch/arm/configs/lart_defconfig +++ b/arch/arm/configs/lart_defconfig @@ -99,7 +99,6 @@ CONFIG_SA1100_LART=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig index b720fcffbcd..6df7b147161 100644 --- a/arch/arm/configs/loki_defconfig +++ b/arch/arm/configs/loki_defconfig @@ -174,7 +174,6 @@ CONFIG_PLAT_ORION=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_FEROCEON=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_CPU_32v5=y diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig index 1a38d8e3fe6..aeb76861534 100644 --- a/arch/arm/configs/lpd270_defconfig +++ b/arch/arm/configs/lpd270_defconfig @@ -143,7 +143,6 @@ CONFIG_PXA27x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig index f8ac29d5c65..6116feea2e1 100644 --- a/arch/arm/configs/lpd7a400_defconfig +++ b/arch/arm/configs/lpd7a400_defconfig @@ -95,7 +95,6 @@ CONFIG_LPD7A40X_CPLD_SSP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM922T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig index 7a2e932da1c..142cccdd971 100644 --- a/arch/arm/configs/lpd7a404_defconfig +++ b/arch/arm/configs/lpd7a404_defconfig @@ -117,7 +117,6 @@ CONFIG_ARCH_LH7A404=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM922T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig index e544bfbbde5..75c6293376b 100644 --- a/arch/arm/configs/lubbock_defconfig +++ b/arch/arm/configs/lubbock_defconfig @@ -92,7 +92,6 @@ CONFIG_PXA25x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/lusl7200_defconfig b/arch/arm/configs/lusl7200_defconfig index 42f6a77bc3c..c1a1fb049a7 100644 --- a/arch/arm/configs/lusl7200_defconfig +++ b/arch/arm/configs/lusl7200_defconfig @@ -82,7 +82,6 @@ CONFIG_ARCH_L7200=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM720T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_LV4T=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 957fd5fa27c..8e9a7232bc4 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -204,7 +204,6 @@ CONFIG_PXA_HAVE_BOARD_IRQS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig index cc8c95b9929..1cddb617849 100644 --- a/arch/arm/configs/mainstone_defconfig +++ b/arch/arm/configs/mainstone_defconfig @@ -93,7 +93,6 @@ CONFIG_IWMMXT=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index e49ed40f3be..d2a90eb844a 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -256,7 +256,6 @@ CONFIG_MACH_MINI2440=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index cc3b06ee24f..fe25e3b9a45 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -155,7 +155,6 @@ CONFIG_MSM_SMD=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 398274b0771..6afa2c108ea 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -181,7 +181,6 @@ CONFIG_PLAT_ORION=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_FEROCEON=y CONFIG_CPU_FEROCEON_OLD_ID=y CONFIG_CPU_32v5=y diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig index 0200d67e30b..f5750703b70 100644 --- a/arch/arm/configs/mx1_defconfig +++ b/arch/arm/configs/mx1_defconfig @@ -190,7 +190,6 @@ CONFIG_MXC_IRQ_PRIOR=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig index 577d7e1b5d4..3cabbb6d927 100644 --- a/arch/arm/configs/mx1ads_defconfig +++ b/arch/arm/configs/mx1ads_defconfig @@ -88,7 +88,6 @@ CONFIG_ARCH_MX1ADS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig index 4b04290d8e8..1ecd6276e0f 100644 --- a/arch/arm/configs/mx21_defconfig +++ b/arch/arm/configs/mx21_defconfig @@ -185,7 +185,6 @@ CONFIG_MXC_PWM=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig index 75263a83741..edfdd6faf80 100644 --- a/arch/arm/configs/mx27_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -207,7 +207,6 @@ CONFIG_MXC_PWM=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig index 95ffc0db95a..d40953798d9 100644 --- a/arch/arm/configs/mx31pdk_defconfig +++ b/arch/arm/configs/mx31pdk_defconfig @@ -173,7 +173,6 @@ CONFIG_MACH_MX31_3DS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 7734ccab211..8a06bc64fe5 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -218,7 +218,6 @@ CONFIG_ARCH_MXC_IOMUX_V3=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig index a1657b73683..75cae18fbcb 100644 --- a/arch/arm/configs/n770_defconfig +++ b/arch/arm/configs/n770_defconfig @@ -210,7 +210,6 @@ CONFIG_OMAP_ARM_216MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig index 264f52b5c52..e6f667c5e58 100644 --- a/arch/arm/configs/n8x0_defconfig +++ b/arch/arm/configs/n8x0_defconfig @@ -232,7 +232,6 @@ CONFIG_MACH_NOKIA_N8X0=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig index e0e4e98b5aa..d165c757e44 100644 --- a/arch/arm/configs/neocore926_defconfig +++ b/arch/arm/configs/neocore926_defconfig @@ -218,7 +218,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index 36cd62edd05..171265ed02e 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -103,7 +103,6 @@ CONFIG_ASSABET_NEPONSET=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig index c1a63a35c58..78f58a99c5a 100644 --- a/arch/arm/configs/netwinder_defconfig +++ b/arch/arm/configs/netwinder_defconfig @@ -89,7 +89,6 @@ CONFIG_FOOTBRIDGE_HOST=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA110=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig index 61d0fc5b241..2a97e361ec7 100644 --- a/arch/arm/configs/netx_defconfig +++ b/arch/arm/configs/netx_defconfig @@ -122,7 +122,6 @@ CONFIG_MACH_NXEB500HMI=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 600cb270f2b..92d90862f5e 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -191,7 +191,6 @@ CONFIG_I2C_BITBANG_8815NHK=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/nuc910_defconfig b/arch/arm/configs/nuc910_defconfig index 5245655a0ad..f80848a929a 100644 --- a/arch/arm/configs/nuc910_defconfig +++ b/arch/arm/configs/nuc910_defconfig @@ -180,7 +180,6 @@ CONFIG_MACH_W90P910EVB=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig index df1de9b45ca..97300ec478d 100644 --- a/arch/arm/configs/nuc950_defconfig +++ b/arch/arm/configs/nuc950_defconfig @@ -201,7 +201,6 @@ CONFIG_MACH_W90P950EVB=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig index 4b2cd9eae9b..aa7e128f5d7 100644 --- a/arch/arm/configs/nuc960_defconfig +++ b/arch/arm/configs/nuc960_defconfig @@ -201,7 +201,6 @@ CONFIG_MACH_W90N960EVB=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig index 9cfae374e04..c7999f5b1c9 100644 --- a/arch/arm/configs/omap3_beagle_defconfig +++ b/arch/arm/configs/omap3_beagle_defconfig @@ -213,7 +213,6 @@ CONFIG_MACH_OMAP3_BEAGLE=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig index 2af28eab906..367be98a6ae 100644 --- a/arch/arm/configs/omap3_defconfig +++ b/arch/arm/configs/omap3_defconfig @@ -245,7 +245,6 @@ CONFIG_MACH_OMAP_3630SDP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index e190fc8b9a7..86cc4bea616 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -220,7 +220,6 @@ CONFIG_MACH_OMAP3EVM=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig index b7a8d9fa49d..f74eb9a1d19 100644 --- a/arch/arm/configs/omap3_pandora_defconfig +++ b/arch/arm/configs/omap3_pandora_defconfig @@ -211,7 +211,6 @@ CONFIG_MACH_OMAP3_PANDORA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig index 7c8515e65c0..74fe6be9c5e 100644 --- a/arch/arm/configs/omap3_touchbook_defconfig +++ b/arch/arm/configs/omap3_touchbook_defconfig @@ -246,7 +246,6 @@ CONFIG_MACH_OMAP3_TOUCHBOOK=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig index 640e9afc463..45b4ebae305 100644 --- a/arch/arm/configs/omap_2430sdp_defconfig +++ b/arch/arm/configs/omap_2430sdp_defconfig @@ -197,7 +197,6 @@ CONFIG_MACH_OMAP_2430SDP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig index 592457cfbbe..bb2917e5cb4 100644 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ b/arch/arm/configs/omap_3430sdp_defconfig @@ -232,7 +232,6 @@ CONFIG_MACH_OMAP_3430SDP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig index e836c8a0014..d25c3d4424c 100644 --- a/arch/arm/configs/omap_3630sdp_defconfig +++ b/arch/arm/configs/omap_3630sdp_defconfig @@ -236,7 +236,6 @@ CONFIG_MACH_OMAP_3630SDP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig index 2319113c86b..3de640ac294 100644 --- a/arch/arm/configs/omap_4430sdp_defconfig +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -220,7 +220,6 @@ CONFIG_MACH_OMAP_4430SDP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig index ac7adf34c54..cc86342896a 100644 --- a/arch/arm/configs/omap_apollon_2420_defconfig +++ b/arch/arm/configs/omap_apollon_2420_defconfig @@ -196,7 +196,6 @@ CONFIG_MACH_OMAP_APOLLON=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig index ccdc661b585..61744e507e4 100644 --- a/arch/arm/configs/omap_generic_1510_defconfig +++ b/arch/arm/configs/omap_generic_1510_defconfig @@ -205,7 +205,6 @@ CONFIG_OMAP_ARM_168MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig index 0c42c895504..d773857ed0c 100644 --- a/arch/arm/configs/omap_generic_1610_defconfig +++ b/arch/arm/configs/omap_generic_1610_defconfig @@ -207,7 +207,6 @@ CONFIG_OMAP_ARM_192MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig index 0a00a708a4f..6ec487e6e02 100644 --- a/arch/arm/configs/omap_generic_1710_defconfig +++ b/arch/arm/configs/omap_generic_1710_defconfig @@ -201,7 +201,6 @@ CONFIG_OMAP_ARM_192MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig index cf4073b47aa..7218b96c0b7 100644 --- a/arch/arm/configs/omap_generic_2420_defconfig +++ b/arch/arm/configs/omap_generic_2420_defconfig @@ -191,7 +191,6 @@ CONFIG_ARCH_OMAP2420=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 74dbdc644d3..523189586a4 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -231,7 +231,6 @@ CONFIG_OMAP_ARM_60MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig index a4aab8e4c29..b12b406c196 100644 --- a/arch/arm/configs/omap_h4_2420_defconfig +++ b/arch/arm/configs/omap_h4_2420_defconfig @@ -201,7 +201,6 @@ CONFIG_MACH_OMAP_H4=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig index 0cfe363e336..e9c14082125 100644 --- a/arch/arm/configs/omap_innovator_1510_defconfig +++ b/arch/arm/configs/omap_innovator_1510_defconfig @@ -205,7 +205,6 @@ CONFIG_OMAP_ARM_168MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig index 95d9f2be53e..fea9319ed7f 100644 --- a/arch/arm/configs/omap_innovator_1610_defconfig +++ b/arch/arm/configs/omap_innovator_1610_defconfig @@ -206,7 +206,6 @@ CONFIG_OMAP_ARM_192MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig index 9139532c3be..0efb4b044ff 100644 --- a/arch/arm/configs/omap_ldp_defconfig +++ b/arch/arm/configs/omap_ldp_defconfig @@ -214,7 +214,6 @@ CONFIG_MACH_OMAP_LDP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig index 6b3b5c610da..556fcca1b1d 100644 --- a/arch/arm/configs/omap_osk_5912_defconfig +++ b/arch/arm/configs/omap_osk_5912_defconfig @@ -212,7 +212,6 @@ CONFIG_OMAP_ARM_192MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig index b94800c0e00..9a15d5da57f 100644 --- a/arch/arm/configs/omap_perseus2_730_defconfig +++ b/arch/arm/configs/omap_perseus2_730_defconfig @@ -199,7 +199,6 @@ CONFIG_OMAP_ARM_182MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index 4b00a430681..a82e81332a0 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -222,7 +222,6 @@ CONFIG_MACH_OMAP_ZOOM2=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig index 0d7e37a3651..a3e3c8274c9 100644 --- a/arch/arm/configs/omap_zoom3_defconfig +++ b/arch/arm/configs/omap_zoom3_defconfig @@ -236,7 +236,6 @@ CONFIG_MACH_OMAP_ZOOM3=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index f8701fadb60..19b91dedc7f 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -161,7 +161,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 5383cd0dff5..85b05d3e279 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -210,7 +210,6 @@ CONFIG_PLAT_ORION=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_FEROCEON=y CONFIG_CPU_FEROCEON_OLD_ID=y CONFIG_CPU_32v5=y diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig index b3ea2c4c0f9..bf06d3660a3 100644 --- a/arch/arm/configs/overo_defconfig +++ b/arch/arm/configs/overo_defconfig @@ -217,7 +217,6 @@ CONFIG_MACH_OVERO=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig index 40fc6a778e0..feffaa2deae 100644 --- a/arch/arm/configs/palmte_defconfig +++ b/arch/arm/configs/palmte_defconfig @@ -196,7 +196,6 @@ CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig index e54ced41217..55d5b7dfb7a 100644 --- a/arch/arm/configs/palmtt_defconfig +++ b/arch/arm/configs/palmtt_defconfig @@ -176,7 +176,6 @@ CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig index 08e14068fff..6efc7465a76 100644 --- a/arch/arm/configs/palmz71_defconfig +++ b/arch/arm/configs/palmz71_defconfig @@ -200,7 +200,6 @@ CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig index a0dc37c05de..6d162b137ce 100644 --- a/arch/arm/configs/palmz72_defconfig +++ b/arch/arm/configs/palmz72_defconfig @@ -209,7 +209,6 @@ CONFIG_PXA_PWM=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index 05ad96a43b1..fa153f2711b 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -168,7 +168,6 @@ CONFIG_PXA27x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig index 9018f0f298a..6e7155c122a 100644 --- a/arch/arm/configs/picotux200_defconfig +++ b/arch/arm/configs/picotux200_defconfig @@ -168,7 +168,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig index f2d2dda2594..dbfabb5eede 100644 --- a/arch/arm/configs/pleb_defconfig +++ b/arch/arm/configs/pleb_defconfig @@ -100,7 +100,6 @@ CONFIG_SA1100_PLEB=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig index 67b5f1e15f4..2f7b9ce7dad 100644 --- a/arch/arm/configs/pnx4008_defconfig +++ b/arch/arm/configs/pnx4008_defconfig @@ -121,7 +121,6 @@ CONFIG_ARCH_PNX4008=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig index db5faeaec96..791b8c39aef 100644 --- a/arch/arm/configs/pxa168_defconfig +++ b/arch/arm/configs/pxa168_defconfig @@ -184,7 +184,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_MOHAWK=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig index 46e5089df0a..3365c5d77ca 100644 --- a/arch/arm/configs/pxa255-idp_defconfig +++ b/arch/arm/configs/pxa255-idp_defconfig @@ -92,7 +92,6 @@ CONFIG_PXA25x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index 733b851e5b7..82ca6c80d6a 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig @@ -240,7 +240,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSC3=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig index 8c7e299f1d6..94e20fe6dbd 100644 --- a/arch/arm/configs/pxa910_defconfig +++ b/arch/arm/configs/pxa910_defconfig @@ -184,7 +184,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_MOHAWK=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig index 9b32d0eb89b..12d0d64e321 100644 --- a/arch/arm/configs/qil-a9260_defconfig +++ b/arch/arm/configs/qil-a9260_defconfig @@ -195,7 +195,6 @@ CONFIG_AT91_EARLY_USART0=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index 21db4b3ec8f..123701754d4 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -186,7 +186,6 @@ CONFIG_REALVIEW_HIGH_PHYS_OFFSET=y # # Processor Type # -CONFIG_CPU_32=y # CONFIG_CPU_ARM926T is not set CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 9a75c30b910..a509a5e59d2 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -184,7 +184,6 @@ CONFIG_MACH_REALVIEW_PB1176=y # # Processor Type # -CONFIG_CPU_32=y # CONFIG_CPU_ARM926T is not set CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index a29d61fe4c6..e9124a00039 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -150,7 +150,6 @@ CONFIG_ARCH_ACORN=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM610=y CONFIG_CPU_ARM710=y CONFIG_CPU_SA110=y diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index 15597342602..b6eeebb3176 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -212,7 +212,6 @@ CONFIG_MACH_NOKIA_RX51=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index b49810461e4..2f10dae0279 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -277,7 +277,6 @@ CONFIG_MACH_SMDK2443=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v4T=y diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 32860609e05..f56e50fab79 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -192,7 +192,6 @@ CONFIG_SMDK6410_SD_CH0=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig index b0d7d3d3a5e..dc108afc060 100644 --- a/arch/arm/configs/s5pc100_defconfig +++ b/arch/arm/configs/s5pc100_defconfig @@ -202,7 +202,6 @@ CONFIG_MACH_SMDKC100=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig index 1174e276487..81b290ad5d2 100644 --- a/arch/arm/configs/sam9_l9260_defconfig +++ b/arch/arm/configs/sam9_l9260_defconfig @@ -175,7 +175,6 @@ CONFIG_MTD_AT91_DATAFLASH_CARD=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig index 984f7096a53..7c49bc35246 100644 --- a/arch/arm/configs/shannon_defconfig +++ b/arch/arm/configs/shannon_defconfig @@ -99,7 +99,6 @@ CONFIG_SA1100_SHANNON=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig index 90235bf7a1d..46de1247d12 100644 --- a/arch/arm/configs/shark_defconfig +++ b/arch/arm/configs/shark_defconfig @@ -173,7 +173,6 @@ CONFIG_ARCH_SHARK=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA110=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig index 685d2b51320..ee25e634415 100644 --- a/arch/arm/configs/simpad_defconfig +++ b/arch/arm/configs/simpad_defconfig @@ -101,7 +101,6 @@ CONFIG_SA1100_SIMPAD=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 745c68ffb88..7d894894194 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -212,7 +212,6 @@ CONFIG_PXA_SSP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig index 44461f197a1..b1a3a97d46e 100644 --- a/arch/arm/configs/stmp378x_defconfig +++ b/arch/arm/configs/stmp378x_defconfig @@ -193,7 +193,6 @@ CONFIG_MACH_STMP378X=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig index 401279d531d..a3751c9e141 100644 --- a/arch/arm/configs/stmp37xx_defconfig +++ b/arch/arm/configs/stmp37xx_defconfig @@ -182,7 +182,6 @@ CONFIG_MACH_STMP37XX=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig index 25b007ff8ba..8a9e7e6bd03 100644 --- a/arch/arm/configs/sx1_defconfig +++ b/arch/arm/configs/sx1_defconfig @@ -210,7 +210,6 @@ CONFIG_OMAP_ARM_168MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 9d32faef05f..dccf14b4ee0 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -215,7 +215,6 @@ CONFIG_MACH_TCT_HAMMER=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index b6f83819781..1e8f5a21185 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -156,7 +156,6 @@ CONFIG_PXA27x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 953ba0297fc..610ac3c47b0 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -207,7 +207,6 @@ CONFIG_MACH_U300_SPIDUMMY=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 15fde22ce3f..727aff9fe34 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -201,7 +201,6 @@ CONFIG_MACH_U8500_MOP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig index fd7774033d6..87b700e2db8 100644 --- a/arch/arm/configs/usb-a9260_defconfig +++ b/arch/arm/configs/usb-a9260_defconfig @@ -195,7 +195,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig index e7c19dd9255..7f018edd248 100644 --- a/arch/arm/configs/usb-a9263_defconfig +++ b/arch/arm/configs/usb-a9263_defconfig @@ -187,7 +187,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index b11c5da3996..a1af0b972c0 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -117,7 +117,6 @@ CONFIG_MACH_VERSATILE_AB=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 6ab5dd5868d..909887ae524 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -204,7 +204,6 @@ CONFIG_PXA_HAVE_ISA_IRQS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig index 33bb7250946..84a72ac222c 100644 --- a/arch/arm/configs/xcep_defconfig +++ b/arch/arm/configs/xcep_defconfig @@ -208,7 +208,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig index 9192e597767..3b627aadeb5 100644 --- a/arch/arm/configs/yl9200_defconfig +++ b/arch/arm/configs/yl9200_defconfig @@ -183,7 +183,6 @@ CONFIG_MACH_YL9200=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 823b11e7091..fca5ff68ea6 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -271,7 +271,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 3976412685f..8fdae9bc9ab 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -24,206 +24,228 @@ * CPU_NAME - the prefix for CPU related functions */ -#ifdef CONFIG_CPU_32 -# ifdef CONFIG_CPU_ARM610 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm6 -# endif +#ifdef CONFIG_CPU_ARM610 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm6 # endif -# ifdef CONFIG_CPU_ARM7TDMI -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm7tdmi -# endif +#endif + +#ifdef CONFIG_CPU_ARM7TDMI +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm7tdmi # endif -# ifdef CONFIG_CPU_ARM710 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm7 -# endif +#endif + +#ifdef CONFIG_CPU_ARM710 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm7 # endif -# ifdef CONFIG_CPU_ARM720T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm720 -# endif +#endif + +#ifdef CONFIG_CPU_ARM720T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm720 # endif -# ifdef CONFIG_CPU_ARM740T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm740 -# endif +#endif + +#ifdef CONFIG_CPU_ARM740T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm740 # endif -# ifdef CONFIG_CPU_ARM9TDMI -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm9tdmi -# endif +#endif + +#ifdef CONFIG_CPU_ARM9TDMI +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm9tdmi # endif -# ifdef CONFIG_CPU_ARM920T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm920 -# endif +#endif + +#ifdef CONFIG_CPU_ARM920T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm920 # endif -# ifdef CONFIG_CPU_ARM922T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm922 -# endif +#endif + +#ifdef CONFIG_CPU_ARM922T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm922 # endif -# ifdef CONFIG_CPU_FA526 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_fa526 -# endif +#endif + +#ifdef CONFIG_CPU_FA526 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_fa526 # endif -# ifdef CONFIG_CPU_ARM925T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm925 -# endif +#endif + +#ifdef CONFIG_CPU_ARM925T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm925 # endif -# ifdef CONFIG_CPU_ARM926T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm926 -# endif +#endif + +#ifdef CONFIG_CPU_ARM926T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm926 # endif -# ifdef CONFIG_CPU_ARM940T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm940 -# endif +#endif + +#ifdef CONFIG_CPU_ARM940T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm940 # endif -# ifdef CONFIG_CPU_ARM946E -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm946 -# endif +#endif + +#ifdef CONFIG_CPU_ARM946E +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm946 # endif -# ifdef CONFIG_CPU_SA110 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_sa110 -# endif +#endif + +#ifdef CONFIG_CPU_SA110 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_sa110 # endif -# ifdef CONFIG_CPU_SA1100 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_sa1100 -# endif +#endif + +#ifdef CONFIG_CPU_SA1100 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_sa1100 # endif -# ifdef CONFIG_CPU_ARM1020 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1020 -# endif +#endif + +#ifdef CONFIG_CPU_ARM1020 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1020 # endif -# ifdef CONFIG_CPU_ARM1020E -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1020e -# endif +#endif + +#ifdef CONFIG_CPU_ARM1020E +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1020e # endif -# ifdef CONFIG_CPU_ARM1022 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1022 -# endif +#endif + +#ifdef CONFIG_CPU_ARM1022 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1022 # endif -# ifdef CONFIG_CPU_ARM1026 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1026 -# endif +#endif + +#ifdef CONFIG_CPU_ARM1026 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1026 # endif -# ifdef CONFIG_CPU_XSCALE -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_xscale -# endif +#endif + +#ifdef CONFIG_CPU_XSCALE +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_xscale # endif -# ifdef CONFIG_CPU_XSC3 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_xsc3 -# endif +#endif + +#ifdef CONFIG_CPU_XSC3 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_xsc3 # endif -# ifdef CONFIG_CPU_MOHAWK -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_mohawk -# endif +#endif + +#ifdef CONFIG_CPU_MOHAWK +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_mohawk # endif -# ifdef CONFIG_CPU_FEROCEON -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_feroceon -# endif +#endif + +#ifdef CONFIG_CPU_FEROCEON +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_feroceon # endif -# ifdef CONFIG_CPU_V6 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_v6 -# endif +#endif + +#ifdef CONFIG_CPU_V6 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_v6 # endif -# ifdef CONFIG_CPU_V7 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_v7 -# endif +#endif + +#ifdef CONFIG_CPU_V7 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_v7 # endif #endif diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h index f27379d7f72..c4391ba2035 100644 --- a/arch/arm/include/asm/thread_notify.h +++ b/arch/arm/include/asm/thread_notify.h @@ -41,7 +41,7 @@ static inline void thread_notify(unsigned long rc, struct thread_info *thread) * These are the reason codes for the thread notifier. */ #define THREAD_NOTIFY_FLUSH 0 -#define THREAD_NOTIFY_RELEASE 1 +#define THREAD_NOTIFY_EXIT 1 #define THREAD_NOTIFY_SWITCH 2 #endif diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c index 769abe15cf9..25ef223ba7f 100644 --- a/arch/arm/kernel/crunch.c +++ b/arch/arm/kernel/crunch.c @@ -51,7 +51,7 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t) * initialised state information on the first fault. */ - case THREAD_NOTIFY_RELEASE: + case THREAD_NOTIFY_EXIT: crunch_task_release(thread); break; diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c index 0e88e46fc73..360bb6d701f 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/kernel/dma-isa.c @@ -207,8 +207,6 @@ void __init isa_init_dma(void) outb(0x32, 0x4d6); outb(0x33, 0x4d6); - request_dma(DMA_ISA_CASCADE, "cascade"); - for (i = 0; i < ARRAY_SIZE(dma_resources); i++) request_resource(&ioport_resource, dma_resources + i); @@ -218,5 +216,7 @@ void __init isa_init_dma(void) printk(KERN_ERR "ISADMA%u: unable to register: %d\n", chan, ret); } + + request_dma(DMA_ISA_CASCADE, "cascade"); } } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 0d96d0171c0..67304138a2c 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -274,17 +274,18 @@ void show_regs(struct pt_regs * regs) __backtrace(); } +ATOMIC_NOTIFIER_HEAD(thread_notify_head); + +EXPORT_SYMBOL_GPL(thread_notify_head); + /* * Free current thread data structures etc.. */ void exit_thread(void) { + thread_notify(THREAD_NOTIFY_EXIT, current_thread_info()); } -ATOMIC_NOTIFIER_HEAD(thread_notify_head); - -EXPORT_SYMBOL_GPL(thread_notify_head); - void flush_thread(void) { struct thread_info *thread = current_thread_info(); @@ -299,9 +300,6 @@ void flush_thread(void) void release_thread(struct task_struct *dead_task) { - struct thread_info *thread = task_thread_info(dead_task); - - thread_notify(THREAD_NOTIFY_RELEASE, thread); } asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c index 17127db906f..1796157e3dd 100644 --- a/arch/arm/kernel/xscale-cp0.c +++ b/arch/arm/kernel/xscale-cp0.c @@ -70,7 +70,7 @@ static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t) * initialised state information on the first fault. */ - case THREAD_NOTIFY_RELEASE: + case THREAD_NOTIFY_EXIT: iwmmxt_task_release(thread); break; diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index 32f8609e4f8..3afb1b25946 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := common.o dc21285.o dma.o isa-irq.o time.o +obj-y := common.o dc21285.o dma.o isa-irq.o obj-m := obj-n := obj- := @@ -25,4 +25,4 @@ obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o obj-$(CONFIG_PCI) +=$(pci-y) obj-$(CONFIG_LEDS) +=$(leds-y) -obj-$(CONFIG_ISA) += isa.o +obj-$(CONFIG_ISA) += isa.o isa-rtc.o diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index da35bc5c5cc..bc5e83fb581 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -56,8 +56,6 @@ static void __init footbridge_timer_init(void) *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | TIMER_CNTL_DIV16; setup_irq(IRQ_TIMER1, &footbridge_timer_irq); - - isa_rtc_init(); } struct sys_timer footbridge_timer = { diff --git a/arch/arm/mach-footbridge/isa-rtc.c b/arch/arm/mach-footbridge/isa-rtc.c new file mode 100644 index 00000000000..07fde4051f7 --- /dev/null +++ b/arch/arm/mach-footbridge/isa-rtc.c @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-footbridge/isa-rtc.c + * + * Copyright (C) 1998 Russell King. + * Copyright (C) 1998 Phil Blundell + * + * CATS has a real-time clock, though the evaluation board doesn't. + * + * Changelog: + * 21-Mar-1998 RMK Created + * 27-Aug-1998 PJB CATS support + * 28-Dec-1998 APH Made leds optional + * 20-Jan-1999 RMK Started merge of EBSA285, CATS and NetWinder + * 16-Mar-1999 RMK More support for EBSA285-like machines with RTCs in + */ + +#define RTC_PORT(x) (0x70+(x)) +#define RTC_ALWAYS_BCD 0 + +#include <linux/init.h> +#include <linux/mc146818rtc.h> +#include <linux/bcd.h> +#include <linux/io.h> + +#include "common.h" + +void __init isa_rtc_init(void) +{ + int reg_d, reg_b; + + /* + * Probe for the RTC. + */ + reg_d = CMOS_READ(RTC_REG_D); + + /* + * make sure the divider is set + */ + CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_REG_A); + + /* + * Set control reg B + * (24 hour mode, update enabled) + */ + reg_b = CMOS_READ(RTC_REG_B) & 0x7f; + reg_b |= 2; + CMOS_WRITE(reg_b, RTC_REG_B); + + if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ && + CMOS_READ(RTC_REG_B) == reg_b) { + /* + * We have a RTC. Check the battery + */ + if ((reg_d & 0x80) == 0) + printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n"); + } +} diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index 0c8390082fa..f488fa2082d 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -76,8 +76,6 @@ static struct irqaction isa_timer_irq = { static void __init isa_timer_init(void) { - isa_rtc_init(); - /* enable PIT timer */ /* set for periodic (4) and LSB/MSB write (0x30) */ outb(0x34, 0x43); diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c index 725a219d0ed..4d9276c27d6 100644 --- a/arch/arm/mach-footbridge/isa.c +++ b/arch/arm/mach-footbridge/isa.c @@ -11,6 +11,9 @@ #include <linux/serial_8250.h> #include <asm/irq.h> +#include <asm/hardware/dec21285.h> + +#include "common.h" static struct resource rtc_resources[] = { [0] = { @@ -77,11 +80,18 @@ static struct platform_device serial_device = { static int __init footbridge_isa_init(void) { - int err; + int err = 0; - err = platform_device_register(&rtc_device); - if (err) - printk(KERN_ERR "Unable to register RTC device: %d\n", err); + if (!footbridge_cfn_mode()) + return 0; + + /* Personal server doesn't have RTC */ + if (!machine_is_personal_server()) { + isa_rtc_init(); + err = platform_device_register(&rtc_device); + if (err) + printk(KERN_ERR "Unable to register RTC device: %d\n", err); + } err = platform_device_register(&serial_device); if (err) printk(KERN_ERR "Unable to register serial device: %d\n", err); diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c deleted file mode 100644 index cd1b54ff9fe..00000000000 --- a/arch/arm/mach-footbridge/time.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * arch/arm/mach-footbridge/include/mach/time.h - * - * Copyright (C) 1998 Russell King. - * Copyright (C) 1998 Phil Blundell - * - * CATS has a real-time clock, though the evaluation board doesn't. - * - * Changelog: - * 21-Mar-1998 RMK Created - * 27-Aug-1998 PJB CATS support - * 28-Dec-1998 APH Made leds optional - * 20-Jan-1999 RMK Started merge of EBSA285, CATS and NetWinder - * 16-Mar-1999 RMK More support for EBSA285-like machines with RTCs in - */ - -#define RTC_PORT(x) (rtc_base+(x)) -#define RTC_ALWAYS_BCD 0 - -#include <linux/timex.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/mc146818rtc.h> -#include <linux/bcd.h> -#include <linux/io.h> - -#include <mach/hardware.h> - -#include <asm/mach/time.h> -#include "common.h" - -static int rtc_base; - -static unsigned long __init get_isa_cmos_time(void) -{ - unsigned int year, mon, day, hour, min, sec; - - // check to see if the RTC makes sense..... - if ((CMOS_READ(RTC_VALID) & RTC_VRT) == 0) - return mktime(1970, 1, 1, 0, 0, 0); - - do { - sec = CMOS_READ(RTC_SECONDS); - min = CMOS_READ(RTC_MINUTES); - hour = CMOS_READ(RTC_HOURS); - day = CMOS_READ(RTC_DAY_OF_MONTH); - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); - } while (sec != CMOS_READ(RTC_SECONDS)); - - if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - sec = bcd2bin(sec); - min = bcd2bin(min); - hour = bcd2bin(hour); - day = bcd2bin(day); - mon = bcd2bin(mon); - year = bcd2bin(year); - } - if ((year += 1900) < 1970) - year += 100; - return mktime(year, mon, day, hour, min, sec); -} - -static int set_isa_cmos_time(void) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - unsigned char save_control, save_freq_select; - unsigned long nowtime = xtime.tv_sec; - - save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ - CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); - - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ - CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - - cmos_minutes = CMOS_READ(RTC_MINUTES); - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - cmos_minutes = bcd2bin(cmos_minutes); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - real_seconds = bin2bcd(real_seconds); - real_minutes = bin2bcd(real_minutes); - } - CMOS_WRITE(real_seconds,RTC_SECONDS); - CMOS_WRITE(real_minutes,RTC_MINUTES); - } else - retval = -1; - - /* The following flags have to be released exactly in this order, - * otherwise the DS12887 (popular MC146818A clone with integrated - * battery and quartz) will not reset the oscillator and will not - * update precisely 500 ms later. You won't find this mentioned in - * the Dallas Semiconductor data sheets, but who believes data - * sheets anyway ... -- Markus Kuhn - */ - CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - - return retval; -} - -void __init isa_rtc_init(void) -{ - if (machine_is_personal_server()) - /* - * Add-in 21285s shouldn't access the RTC - */ - rtc_base = 0; - else - rtc_base = 0x70; - - if (rtc_base) { - int reg_d, reg_b; - - /* - * Probe for the RTC. - */ - reg_d = CMOS_READ(RTC_REG_D); - - /* - * make sure the divider is set - */ - CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_REG_A); - - /* - * Set control reg B - * (24 hour mode, update enabled) - */ - reg_b = CMOS_READ(RTC_REG_B) & 0x7f; - reg_b |= 2; - CMOS_WRITE(reg_b, RTC_REG_B); - - if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ && - CMOS_READ(RTC_REG_B) == reg_b) { - struct timespec tv; - - /* - * We have a RTC. Check the battery - */ - if ((reg_d & 0x80) == 0) - printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n"); - - tv.tv_nsec = 0; - tv.tv_sec = get_isa_cmos_time(); - do_settimeofday(&tv); - set_rtc = set_isa_cmos_time; - } else - rtc_base = 0; - } -} diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 4c79ac8a6c3..97162fdd059 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -279,6 +279,7 @@ static struct s3c2410_nand_set __initdata bast_nand_sets[] = { .name = "SmartMedia", .nr_chips = 1, .nr_map = smartmedia_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), .partitions = bast_default_nand_part, }, @@ -293,6 +294,7 @@ static struct s3c2410_nand_set __initdata bast_nand_sets[] = { .name = "chip1", .nr_chips = 1, .nr_map = chip1_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), .partitions = bast_default_nand_part, }, @@ -300,6 +302,7 @@ static struct s3c2410_nand_set __initdata bast_nand_sets[] = { .name = "chip2", .nr_chips = 1, .nr_map = chip2_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), .partitions = bast_default_nand_part, } diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 49053254c98..1e34abe1a19 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -46,6 +46,7 @@ #include <mach/h1940.h> #include <mach/h1940-latch.h> #include <mach/fb.h> +#include <mach/ts.h> #include <plat/udc.h> #include <plat/iic.h> @@ -140,6 +141,11 @@ static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { .vbus_pin_inverted = 1, }; +static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; /** * Set lcd on or off @@ -265,6 +271,7 @@ static struct platform_device h1940_lcd_powerdev = { }; static struct platform_device *h1940_devices[] __initdata = { + &s3c_device_ts, &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -305,6 +312,7 @@ static void __init h1940_init(void) s3c24xx_fb_set_platdata(&h1940_fb_info); s3c24xx_udc_set_platdata(&h1940_udc_cfg); + s3c24xx_ts_set_platdata(&h1940_ts_cfg); s3c_i2c0_set_platdata(NULL); s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg; diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 015dfb2a80d..f35371db33f 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -208,6 +208,7 @@ static struct s3c2410_nand_set __initdata osiris_nand_sets[] = { .name = "External", .nr_chips = 1, .nr_map = external_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), .partitions = osiris_default_nand_part, }, @@ -222,6 +223,7 @@ static struct s3c2410_nand_set __initdata osiris_nand_sets[] = { .name = "chip1", .nr_chips = 1, .nr_map = chip1_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), .partitions = osiris_default_nand_part, }, diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index 921cef991bf..20dc0c96214 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -96,6 +96,7 @@ static struct clk_lookup nuc900_clkregs[] = { struct plat_serial8250_port nuc900_uart_data[] = { NUC900_8250PORT(UART0), + {}, }; struct platform_device nuc900_serial_device = { diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 51f17b75334..ec711f4b401 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -197,7 +197,7 @@ static struct platform_device nuc900_device_emc = { /* SPI device */ -static struct w90p910_spi_info nuc900_spiflash_data = { +static struct nuc900_spi_info nuc900_spiflash_data = { .num_cs = 1, .lsb = 0, .txneg = 1, diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h index 050d9fe5ae1..56f1a74d701 100644 --- a/arch/arm/mach-w90x900/include/mach/uncompress.h +++ b/arch/arm/mach-w90x900/include/mach/uncompress.h @@ -22,11 +22,21 @@ #include <mach/regs-serial.h> #include <mach/map.h> +#include <linux/serial_reg.h> #define arch_decomp_wdog() +#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) +static volatile u32 * uart_base = (u32 *)UART0_PA; + static void putc(int ch) { + /* Check THRE and TEMT bits before we transmit the character. + */ + while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) + barrier(); + + *uart_base = ch; } static inline void flush(void) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index dd4698c67cc..baf638487a2 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -1,9 +1,5 @@ comment "Processor Type" -config CPU_32 - bool - default y - # Select CPU types depending on the architecture selected. This selects # which CPUs we support in the kernel image, and the compiler instruction # optimiser behaviour. diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 841f355319b..0fa1319273d 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -48,7 +48,7 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to, */ if (page_address(to) != NULL) #endif - __cpuc_flush_dcache_page(kto); + __cpuc_flush_dcache_area(kto, PAGE_SIZE); kunmap_atomic(kto, KM_USER1); kunmap_atomic(kfrom, KM_USER0); } diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 72960229195..56ee15321b0 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -207,9 +207,8 @@ void __init check_writebuffer_bugs(void) page = alloc_page(GFP_KERNEL); if (page) { unsigned long *p1, *p2; - pgprot_t prot = __pgprot(L_PTE_PRESENT|L_PTE_YOUNG| - L_PTE_DIRTY|L_PTE_WRITE| - L_PTE_MT_BUFFERABLE); + pgprot_t prot = __pgprot_modify(PAGE_KERNEL, + L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE); p1 = vmap(&page, 1, VM_IOREMAP, prot); p2 = vmap(&page, 1, VM_IOREMAP, prot); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 8c7fbd19a4b..1708da82da9 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -453,8 +453,7 @@ static void __init build_mem_type_table(void) pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot); pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | - L_PTE_DIRTY | L_PTE_WRITE | - L_PTE_EXEC | kern_pgprot); + L_PTE_DIRTY | L_PTE_WRITE | kern_pgprot); mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; diff --git a/arch/arm/nwfpe/Makefile b/arch/arm/nwfpe/Makefile index b29178c0414..deb3a82ddbd 100644 --- a/arch/arm/nwfpe/Makefile +++ b/arch/arm/nwfpe/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_FPE_NWFPE) += nwfpe.o nwfpe-y += fpa11.o fpa11_cpdo.o fpa11_cpdt.o \ fpa11_cprt.o fpmodule.o fpopcode.o \ - softfloat.o single_cpdo.o double_cpdo.o + softfloat.o single_cpdo.o double_cpdo.o \ + entry.o nwfpe-$(CONFIG_FPE_NWFPE_XP) += extended_cpdo.o -nwfpe-$(CONFIG_CPU_32) += entry.o diff --git a/arch/arm/oprofile/op_model_v7.c b/arch/arm/oprofile/op_model_v7.c index f20295f14ad..2088a6c0cc0 100644 --- a/arch/arm/oprofile/op_model_v7.c +++ b/arch/arm/oprofile/op_model_v7.c @@ -191,12 +191,8 @@ int armv7_setup_pmnc(void) return -EBUSY; } - /* - * Initialize & Reset PMNC: C bit, D bit and P bit. - * Note: Using a slower count for CCNT (D bit: divide by 64) results - * in a more stable system - */ - armv7_pmnc_write(PMNC_P | PMNC_C | PMNC_D); + /* Initialize & Reset PMNC: C bit and P bit */ + armv7_pmnc_write(PMNC_P | PMNC_C); for (cnt = CCNT; cnt < CNTMAX; cnt++) { diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c index e771e77dcd5..84808ccda70 100644 --- a/arch/arm/plat-s3c/dev-nand.c +++ b/arch/arm/plat-s3c/dev-nand.c @@ -114,7 +114,7 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) for (i = 0; i < npd->nr_sets; i++) { ret = s3c_nand_copy_set(to); - if (!ret) { + if (ret) { printk(KERN_ERR "%s: failed to copy set %d\n", __func__, i); return; @@ -122,6 +122,8 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) to++; } } + + s3c_device_nand.dev.platform_data = npd; } EXPORT_SYMBOL_GPL(s3c_nand_set_platdata); diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index aed05bc3c2e..f60a5400a25 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -63,14 +63,15 @@ static void vfp_thread_flush(struct thread_info *thread) put_cpu(); } -static void vfp_thread_release(struct thread_info *thread) +static void vfp_thread_exit(struct thread_info *thread) { /* release case: Per-thread VFP cleanup. */ union vfp_state *vfp = &thread->vfpstate; - unsigned int cpu = thread->cpu; + unsigned int cpu = get_cpu(); if (last_VFP_context[cpu] == vfp) last_VFP_context[cpu] = NULL; + put_cpu(); } /* @@ -88,11 +89,13 @@ static void vfp_thread_release(struct thread_info *thread) * but may change at any time. * - we could be preempted if tree preempt rcu is enabled, so * it is unsafe to use thread->cpu. - * THREAD_NOTIFY_RELEASE: - * - the thread (v) will not be running on any CPU; it is a dead thread. - * - thread->cpu will be the last CPU the thread ran on, which may not - * be the current CPU. - * - we could be preempted if tree preempt rcu is enabled. + * THREAD_NOTIFY_EXIT + * - the thread (v) will be running on the local CPU, so + * v === current_thread_info() + * - thread->cpu is the local CPU number at the time it is accessed, + * but may change at any time. + * - we could be preempted if tree preempt rcu is enabled, so + * it is unsafe to use thread->cpu. */ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) { @@ -133,7 +136,7 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) if (cmd == THREAD_NOTIFY_FLUSH) vfp_thread_flush(thread); else - vfp_thread_release(thread); + vfp_thread_exit(thread); return NOTIFY_DONE; } diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h index 91df9686a0d..7ae58892ba8 100644 --- a/arch/ia64/include/asm/acpi.h +++ b/arch/ia64/include/asm/acpi.h @@ -132,6 +132,12 @@ extern int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS]; extern int __initdata nid_to_pxm_map[MAX_NUMNODES]; #endif +static inline bool arch_has_acpi_pdc(void) { return true; } +static inline void arch_acpi_set_pdc_bits(u32 *buf) +{ + buf[2] |= ACPI_PDC_EST_CAPABILITY_SMP; +} + #define acpi_unlazy_tlb(x) #ifdef CONFIG_ACPI_NUMA diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index 2a75e937ae8..e1236349c99 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -18,10 +18,6 @@ obj-$(CONFIG_IA64_GENERIC) += acpi-ext.o obj-$(CONFIG_IA64_HP_ZX1) += acpi-ext.o obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o -ifneq ($(CONFIG_ACPI_PROCESSOR),) -obj-y += acpi-processor.o -endif - obj-$(CONFIG_IA64_PALINFO) += palinfo.o obj-$(CONFIG_IOSAPIC) += iosapic.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/ia64/kernel/acpi-processor.c b/arch/ia64/kernel/acpi-processor.c deleted file mode 100644 index dbda7bde611..00000000000 --- a/arch/ia64/kernel/acpi-processor.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * arch/ia64/kernel/acpi-processor.c - * - * Copyright (C) 2005 Intel Corporation - * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> - * - Added _PDC for platforms with Intel CPUs - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/acpi.h> - -#include <acpi/processor.h> -#include <asm/acpi.h> - -static void init_intel_pdc(struct acpi_processor *pr) -{ - struct acpi_object_list *obj_list; - union acpi_object *obj; - u32 *buf; - - /* allocate and initialize pdc. It will be used later. */ - obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL); - if (!obj_list) { - printk(KERN_ERR "Memory allocation error\n"); - return; - } - - obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL); - if (!obj) { - printk(KERN_ERR "Memory allocation error\n"); - kfree(obj_list); - return; - } - - buf = kmalloc(12, GFP_KERNEL); - if (!buf) { - printk(KERN_ERR "Memory allocation error\n"); - kfree(obj); - kfree(obj_list); - return; - } - - buf[0] = ACPI_PDC_REVISION_ID; - buf[1] = 1; - buf[2] = ACPI_PDC_EST_CAPABILITY_SMP; - /* - * The default of PDC_SMP_T_SWCOORD bit is set for IA64 cpu so - * that OSPM is capable of native ACPI throttling software - * coordination using BIOS supplied _TSD info. - */ - buf[2] |= ACPI_PDC_SMP_T_SWCOORD; - - obj->type = ACPI_TYPE_BUFFER; - obj->buffer.length = 12; - obj->buffer.pointer = (u8 *) buf; - obj_list->count = 1; - obj_list->pointer = obj; - pr->pdc = obj_list; - - return; -} - -/* Initialize _PDC data based on the CPU vendor */ -void arch_acpi_processor_init_pdc(struct acpi_processor *pr) -{ - pr->pdc = NULL; - init_intel_pdc(pr); - return; -} - -EXPORT_SYMBOL(arch_acpi_processor_init_pdc); - -void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr) -{ - if (pr->pdc) { - kfree(pr->pdc->pointer->buffer.pointer); - kfree(pr->pdc->pointer); - kfree(pr->pdc); - pr->pdc = NULL; - } -} - -EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc); diff --git a/arch/ia64/kvm/vcpu.h b/arch/ia64/kvm/vcpu.h index 360724d3ae6..988911b4cc7 100644 --- a/arch/ia64/kvm/vcpu.h +++ b/arch/ia64/kvm/vcpu.h @@ -388,6 +388,9 @@ static inline u64 __gpfn_is_io(u64 gpfn) #define _vmm_raw_spin_lock(x) do {}while(0) #define _vmm_raw_spin_unlock(x) do {}while(0) #else +typedef struct { + volatile unsigned int lock; +} vmm_spinlock_t; #define _vmm_raw_spin_lock(x) \ do { \ __u32 *ia64_spinlock_ptr = (__u32 *) (x); \ @@ -405,12 +408,12 @@ static inline u64 __gpfn_is_io(u64 gpfn) #define _vmm_raw_spin_unlock(x) \ do { barrier(); \ - ((spinlock_t *)x)->raw_lock.lock = 0; } \ + ((vmm_spinlock_t *)x)->lock = 0; } \ while (0) #endif -void vmm_spin_lock(spinlock_t *lock); -void vmm_spin_unlock(spinlock_t *lock); +void vmm_spin_lock(vmm_spinlock_t *lock); +void vmm_spin_unlock(vmm_spinlock_t *lock); enum { I_TLB = 1, D_TLB = 2 diff --git a/arch/ia64/kvm/vmm.c b/arch/ia64/kvm/vmm.c index f4b4c899bb6..7a62f75778c 100644 --- a/arch/ia64/kvm/vmm.c +++ b/arch/ia64/kvm/vmm.c @@ -60,12 +60,12 @@ static void __exit kvm_vmm_exit(void) return ; } -void vmm_spin_lock(spinlock_t *lock) +void vmm_spin_lock(vmm_spinlock_t *lock) { _vmm_raw_spin_lock(lock); } -void vmm_spin_unlock(spinlock_t *lock) +void vmm_spin_unlock(vmm_spinlock_t *lock) { _vmm_raw_spin_unlock(lock); } diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c index 20b3852f7a6..4332f7ee520 100644 --- a/arch/ia64/kvm/vtlb.c +++ b/arch/ia64/kvm/vtlb.c @@ -182,7 +182,7 @@ void mark_pages_dirty(struct kvm_vcpu *v, u64 pte, u64 ps) { u64 i, dirty_pages = 1; u64 base_gfn = (pte&_PAGE_PPN_MASK) >> PAGE_SHIFT; - spinlock_t *lock = __kvm_va(v->arch.dirty_log_lock_pa); + vmm_spinlock_t *lock = __kvm_va(v->arch.dirty_log_lock_pa); void *dirty_bitmap = (void *)KVM_MEM_DIRTY_LOG_BASE; dirty_pages <<= ps <= PAGE_SHIFT ? 0 : ps - PAGE_SHIFT; diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index e8dfdbd9327..cadbed679fb 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1107,6 +1107,12 @@ void __devinit pcibios_setup_bus_devices(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { struct dev_archdata *sd = &dev->dev.archdata; + /* Cardbus can call us to add new devices to a bus, so ignore + * those who are already fully discovered + */ + if (dev->is_added) + continue; + /* Setup OF node pointer in archdata */ sd->of_node = pci_device_to_OF_node(dev); @@ -1147,6 +1153,13 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) } EXPORT_SYMBOL(pcibios_fixup_bus); +void __devinit pci_fixup_cardbus(struct pci_bus *bus) +{ + /* Now fixup devices on that bus */ + pcibios_setup_bus_devices(bus); +} + + static int skip_isa_ioresource_align(struct pci_dev *dev) { if ((ppc_pci_flags & PPC_PCI_CAN_SKIP_ISA_ALIGN) && diff --git a/arch/powerpc/kvm/book3s_64_mmu.c b/arch/powerpc/kvm/book3s_64_mmu.c index 5598f88f142..e4beeb371a7 100644 --- a/arch/powerpc/kvm/book3s_64_mmu.c +++ b/arch/powerpc/kvm/book3s_64_mmu.c @@ -390,6 +390,26 @@ static void kvmppc_mmu_book3s_64_mtsrin(struct kvm_vcpu *vcpu, u32 srnum, { u64 rb = 0, rs = 0; + /* + * According to Book3 2.01 mtsrin is implemented as: + * + * The SLB entry specified by (RB)32:35 is loaded from register + * RS, as follows. + * + * SLBE Bit Source SLB Field + * + * 0:31 0x0000_0000 ESID-0:31 + * 32:35 (RB)32:35 ESID-32:35 + * 36 0b1 V + * 37:61 0x00_0000|| 0b0 VSID-0:24 + * 62:88 (RS)37:63 VSID-25:51 + * 89:91 (RS)33:35 Ks Kp N + * 92 (RS)36 L ((RS)36 must be 0b0) + * 93 0b0 C + */ + + dprintk("KVM MMU: mtsrin(0x%x, 0x%lx)\n", srnum, value); + /* ESID = srnum */ rb |= (srnum & 0xf) << 28; /* Set the valid bit */ @@ -400,7 +420,7 @@ static void kvmppc_mmu_book3s_64_mtsrin(struct kvm_vcpu *vcpu, u32 srnum, /* VSID = VSID */ rs |= (value & 0xfffffff) << 12; /* flags = flags */ - rs |= ((value >> 27) & 0xf) << 9; + rs |= ((value >> 28) & 0x7) << 9; kvmppc_mmu_book3s_64_slbmte(vcpu, rs, rb); } diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 194aaca22d4..6a8861b39f0 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -128,8 +128,6 @@ static struct platform_device nor_flash_device = { /* SH Eth */ #define SH_ETH_ADDR (0xA4600000) -#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0) -#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8) static struct resource sh_eth_resources[] = { [0] = { .start = SH_ETH_ADDR, @@ -509,6 +507,7 @@ static struct platform_device sdhi1_device = { #else +/* MMC SPI */ static int mmc_spi_get_ro(struct device *dev) { return gpio_get_value(GPIO_PTY6); @@ -542,6 +541,7 @@ static struct spi_board_info spi_bus[] = { }, }; +/* MSIOF0 */ static struct sh_msiof_spi_info msiof0_data = { .num_chipselect = 1, }; diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h index 04ad0e1e637..07373a07409 100644 --- a/arch/sh/include/asm/dma.h +++ b/arch/sh/include/asm/dma.h @@ -19,9 +19,11 @@ #include <asm-generic/dma.h> #ifdef CONFIG_NR_DMA_CHANNELS -# define MAX_DMA_CHANNELS (CONFIG_NR_DMA_CHANNELS) +# define MAX_DMA_CHANNELS (CONFIG_NR_DMA_CHANNELS) +#elif defined(CONFIG_NR_ONCHIP_DMA_CHANNELS) +# define MAX_DMA_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) #else -# define MAX_DMA_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) +# define MAX_DMA_CHANNELS 0 #endif /* diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h index f0886bc880e..c4ed660c14c 100644 --- a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h +++ b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h @@ -19,10 +19,10 @@ #elif defined(CONFIG_CPU_SUBTYPE_SH7723) || \ defined(CONFIG_CPU_SUBTYPE_SH7724) #define DMTE0_IRQ 48 /* DMAC0A*/ -#define DMTE4_IRQ 40 /* DMAC0B */ -#define DMTE6_IRQ 42 -#define DMTE8_IRQ 76 /* DMAC1A */ -#define DMTE9_IRQ 77 +#define DMTE4_IRQ 76 /* DMAC0B */ +#define DMTE6_IRQ 40 +#define DMTE8_IRQ 42 /* DMAC1A */ +#define DMTE9_IRQ 43 #define DMTE10_IRQ 72 /* DMAC1B */ #define DMTE11_IRQ 73 #define DMAE0_IRQ 78 /* DMA Error IRQ*/ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index a52f35117e8..d32f96c1cc1 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -23,9 +23,23 @@ #include <linux/notifier.h> #include <asm/suspend.h> #include <asm/clock.h> +#include <asm/dma-sh.h> #include <asm/mmzone.h> #include <cpu/sh7724.h> +/* DMA */ +static struct sh_dmae_pdata dma_platform_data = { + .mode = SHDMA_DMAOR1, +}; + +static struct platform_device dma_device = { + .name = "sh-dma-engine", + .id = -1, + .dev = { + .platform_data = &dma_platform_data, + }, +}; + /* Serial */ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xffe00000, @@ -649,6 +663,7 @@ static struct platform_device *sh7724_devices[] __initdata = { &tmu3_device, &tmu4_device, &tmu5_device, + &dma_device, &rtc_device, &iic0_device, &iic1_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index ef26ebda6e8..f685b9b2199 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -14,6 +14,7 @@ #include <linux/io.h> #include <linux/mm.h> #include <linux/sh_timer.h> +#include <asm/dma-sh.h> #include <asm/mmzone.h> static struct plat_sci_port scif0_platform_data = { @@ -294,6 +295,18 @@ static struct platform_device tmu5_device = { .num_resources = ARRAY_SIZE(tmu5_resources), }; +static struct sh_dmae_pdata dma_platform_data = { + .mode = (SHDMA_MIX_IRQ | SHDMA_DMAOR1), +}; + +static struct platform_device dma_device = { + .name = "sh-dma-engine", + .id = -1, + .dev = { + .platform_data = &dma_platform_data, + }, +}; + static struct platform_device *sh7785_devices[] __initdata = { &scif0_device, &scif1_device, @@ -307,6 +320,7 @@ static struct platform_device *sh7785_devices[] __initdata = { &tmu3_device, &tmu4_device, &tmu5_device, + &dma_device, }; static int __init sh7785_devices_setup(void) diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c index aaff0037fcd..6b3d706deac 100644 --- a/arch/sh/kernel/idle.c +++ b/arch/sh/kernel/idle.c @@ -62,6 +62,7 @@ void default_idle(void) clear_thread_flag(TIF_POLLING_NRFLAG); smp_mb__after_clear_bit(); + set_bl_bit(); if (!need_resched()) { local_irq_enable(); cpu_sleep(); @@ -69,6 +70,7 @@ void default_idle(void) local_irq_enable(); set_thread_flag(TIF_POLLING_NRFLAG); + clear_bl_bit(); } else poll_idle(); } diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c index e9415d3ea94..b8607fa7ae1 100644 --- a/arch/sh/mm/cache.c +++ b/arch/sh/mm/cache.c @@ -133,12 +133,8 @@ void __update_cache(struct vm_area_struct *vma, page = pfn_to_page(pfn); if (pfn_valid(pfn)) { int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags); - if (dirty) { - unsigned long addr = (unsigned long)page_address(page); - - if (pages_do_alias(addr, address & PAGE_MASK)) - __flush_purge_region((void *)addr, PAGE_SIZE); - } + if (dirty) + __flush_purge_region(page_address(page), PAGE_SIZE); } } diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index f8ed0658404..f25bbd37765 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -9,6 +9,7 @@ targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinu KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING +cflags-$(CONFIG_X86_32) := -march=i386 cflags-$(CONFIG_X86_64) := -mcmodel=small KBUILD_CFLAGS += $(cflags-y) KBUILD_CFLAGS += $(call cc-option,-ffreestanding) diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 60d2b2db0bc..56f462cf22d 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -142,6 +142,32 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate) return max_cstate; } +static inline bool arch_has_acpi_pdc(void) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + return (c->x86_vendor == X86_VENDOR_INTEL || + c->x86_vendor == X86_VENDOR_CENTAUR); +} + +static inline void arch_acpi_set_pdc_bits(u32 *buf) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + + buf[2] |= ACPI_PDC_C_CAPABILITY_SMP; + + if (cpu_has(c, X86_FEATURE_EST)) + buf[2] |= ACPI_PDC_EST_CAPABILITY_SWSMP; + + if (cpu_has(c, X86_FEATURE_ACPI)) + buf[2] |= ACPI_PDC_T_FFH; + + /* + * If mwait/monitor is unsupported, C2/C3_FFH will be disabled + */ + if (!cpu_has(c, X86_FEATURE_MWAIT)) + buf[2] &= ~(ACPI_PDC_C_C2C3_FFH); +} + #else /* !CONFIG_ACPI */ #define acpi_lapic 0 diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h index 950df434763..f46b79f6c16 100644 --- a/arch/x86/include/asm/kvm.h +++ b/arch/x86/include/asm/kvm.h @@ -254,6 +254,10 @@ struct kvm_reinject_control { __u8 reserved[31]; }; +/* When set in flags, include corresponding fields on KVM_SET_VCPU_EVENTS */ +#define KVM_VCPUEVENT_VALID_NMI_PENDING 0x00000001 +#define KVM_VCPUEVENT_VALID_SIPI_VECTOR 0x00000002 + /* for KVM_GET/SET_VCPU_EVENTS */ struct kvm_vcpu_events { struct { diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index 811bfabc80b..bc54fa965af 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -31,20 +31,20 @@ * contiguous (although various IO spaces may punch holes in * it).. * - * N - Number of bits in the node portion of a socket physical - * address. + * N - Number of bits in the node portion of a socket physical + * address. * - * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of - * routers always have low bit of 1, C/MBricks have low bit - * equal to 0. Most addressing macros that target UV hub chips - * right shift the NASID by 1 to exclude the always-zero bit. - * NASIDs contain up to 15 bits. + * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of + * routers always have low bit of 1, C/MBricks have low bit + * equal to 0. Most addressing macros that target UV hub chips + * right shift the NASID by 1 to exclude the always-zero bit. + * NASIDs contain up to 15 bits. * * GNODE - NASID right shifted by 1 bit. Most mmrs contain gnodes instead * of nasids. * - * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant - * of the nasid for socket usage. + * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant + * of the nasid for socket usage. * * * NumaLink Global Physical Address Format: @@ -71,12 +71,12 @@ * * * APICID format - * NOTE!!!!!! This is the current format of the APICID. However, code - * should assume that this will change in the future. Use functions - * in this file for all APICID bit manipulations and conversion. + * NOTE!!!!!! This is the current format of the APICID. However, code + * should assume that this will change in the future. Use functions + * in this file for all APICID bit manipulations and conversion. * - * 1111110000000000 - * 5432109876543210 + * 1111110000000000 + * 5432109876543210 * pppppppppplc0cch * sssssssssss * @@ -89,9 +89,9 @@ * Note: Processor only supports 12 bits in the APICID register. The ACPI * tables hold all 16 bits. Software needs to be aware of this. * - * Unless otherwise specified, all references to APICID refer to - * the FULL value contained in ACPI tables, not the subset in the - * processor APICID register. + * Unless otherwise specified, all references to APICID refer to + * the FULL value contained in ACPI tables, not the subset in the + * processor APICID register. */ @@ -151,16 +151,16 @@ struct uv_hub_info_s { }; DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); -#define uv_hub_info (&__get_cpu_var(__uv_hub_info)) +#define uv_hub_info (&__get_cpu_var(__uv_hub_info)) #define uv_cpu_hub_info(cpu) (&per_cpu(__uv_hub_info, cpu)) /* * Local & Global MMR space macros. - * Note: macros are intended to be used ONLY by inline functions - * in this file - not by other kernel code. - * n - NASID (full 15-bit global nasid) - * g - GNODE (full 15-bit global nasid, right shifted 1) - * p - PNODE (local part of nsids, right shifted 1) + * Note: macros are intended to be used ONLY by inline functions + * in this file - not by other kernel code. + * n - NASID (full 15-bit global nasid) + * g - GNODE (full 15-bit global nasid, right shifted 1) + * p - PNODE (local part of nsids, right shifted 1) */ #define UV_NASID_TO_PNODE(n) (((n) >> 1) & uv_hub_info->pnode_mask) #define UV_PNODE_TO_GNODE(p) ((p) |uv_hub_info->gnode_extra) @@ -215,8 +215,8 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); /* * Macros for converting between kernel virtual addresses, socket local physical * addresses, and UV global physical addresses. - * Note: use the standard __pa() & __va() macros for converting - * between socket virtual and socket physical addresses. + * Note: use the standard __pa() & __va() macros for converting + * between socket virtual and socket physical addresses. */ /* socket phys RAM --> UV global physical address */ @@ -287,21 +287,18 @@ static inline int uv_apicid_to_pnode(int apicid) * Access global MMRs using the low memory MMR32 space. This region supports * faster MMR access but not all MMRs are accessible in this space. */ -static inline unsigned long *uv_global_mmr32_address(int pnode, - unsigned long offset) +static inline unsigned long *uv_global_mmr32_address(int pnode, unsigned long offset) { return __va(UV_GLOBAL_MMR32_BASE | UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset); } -static inline void uv_write_global_mmr32(int pnode, unsigned long offset, - unsigned long val) +static inline void uv_write_global_mmr32(int pnode, unsigned long offset, unsigned long val) { writeq(val, uv_global_mmr32_address(pnode, offset)); } -static inline unsigned long uv_read_global_mmr32(int pnode, - unsigned long offset) +static inline unsigned long uv_read_global_mmr32(int pnode, unsigned long offset) { return readq(uv_global_mmr32_address(pnode, offset)); } @@ -310,21 +307,18 @@ static inline unsigned long uv_read_global_mmr32(int pnode, * Access Global MMR space using the MMR space located at the top of physical * memory. */ -static inline unsigned long *uv_global_mmr64_address(int pnode, - unsigned long offset) +static inline unsigned long *uv_global_mmr64_address(int pnode, unsigned long offset) { return __va(UV_GLOBAL_MMR64_BASE | UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset); } -static inline void uv_write_global_mmr64(int pnode, unsigned long offset, - unsigned long val) +static inline void uv_write_global_mmr64(int pnode, unsigned long offset, unsigned long val) { writeq(val, uv_global_mmr64_address(pnode, offset)); } -static inline unsigned long uv_read_global_mmr64(int pnode, - unsigned long offset) +static inline unsigned long uv_read_global_mmr64(int pnode, unsigned long offset) { return readq(uv_global_mmr64_address(pnode, offset)); } @@ -338,6 +332,16 @@ static inline unsigned long uv_global_gru_mmr_address(int pnode, unsigned long o return UV_GLOBAL_GRU_MMR_BASE | offset | (pnode << uv_hub_info->m_val); } +static inline void uv_write_global_mmr8(int pnode, unsigned long offset, unsigned char val) +{ + writeb(val, uv_global_mmr64_address(pnode, offset)); +} + +static inline unsigned char uv_read_global_mmr8(int pnode, unsigned long offset) +{ + return readb(uv_global_mmr64_address(pnode, offset)); +} + /* * Access hub local MMRs. Faster than using global space but only local MMRs * are accessible. @@ -457,11 +461,17 @@ static inline void uv_set_scir_bits(unsigned char value) } } +static inline unsigned long uv_scir_offset(int apicid) +{ + return SCIR_LOCAL_MMR_BASE | (apicid & 0x3f); +} + static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value) { if (uv_cpu_hub_info(cpu)->scir.state != value) { + uv_write_global_mmr8(uv_cpu_to_pnode(cpu), + uv_cpu_hub_info(cpu)->scir.offset, value); uv_cpu_hub_info(cpu)->scir.state = value; - uv_write_local_mmr8(uv_cpu_hub_info(cpu)->scir.offset, value); } } diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile index fd5ca97a2ad..6f35260bb3e 100644 --- a/arch/x86/kernel/acpi/Makefile +++ b/arch/x86/kernel/acpi/Makefile @@ -4,7 +4,7 @@ obj-$(CONFIG_ACPI) += boot.o obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_rm.o wakeup_$(BITS).o ifneq ($(CONFIG_ACPI_PROCESSOR),) -obj-y += cstate.o processor.o +obj-y += cstate.o endif $(obj)/wakeup_rm.o: $(obj)/realmode/wakeup.bin diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c deleted file mode 100644 index d85d1b2432b..00000000000 --- a/arch/x86/kernel/acpi/processor.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2005 Intel Corporation - * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> - * - Added _PDC for platforms with Intel CPUs - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/acpi.h> - -#include <acpi/processor.h> -#include <asm/acpi.h> - -static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c) -{ - struct acpi_object_list *obj_list; - union acpi_object *obj; - u32 *buf; - - /* allocate and initialize pdc. It will be used later. */ - obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL); - if (!obj_list) { - printk(KERN_ERR "Memory allocation error\n"); - return; - } - - obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL); - if (!obj) { - printk(KERN_ERR "Memory allocation error\n"); - kfree(obj_list); - return; - } - - buf = kmalloc(12, GFP_KERNEL); - if (!buf) { - printk(KERN_ERR "Memory allocation error\n"); - kfree(obj); - kfree(obj_list); - return; - } - - buf[0] = ACPI_PDC_REVISION_ID; - buf[1] = 1; - buf[2] = ACPI_PDC_C_CAPABILITY_SMP; - - /* - * The default of PDC_SMP_T_SWCOORD bit is set for intel x86 cpu so - * that OSPM is capable of native ACPI throttling software - * coordination using BIOS supplied _TSD info. - */ - buf[2] |= ACPI_PDC_SMP_T_SWCOORD; - if (cpu_has(c, X86_FEATURE_EST)) - buf[2] |= ACPI_PDC_EST_CAPABILITY_SWSMP; - - if (cpu_has(c, X86_FEATURE_ACPI)) - buf[2] |= ACPI_PDC_T_FFH; - - /* - * If mwait/monitor is unsupported, C2/C3_FFH will be disabled - */ - if (!cpu_has(c, X86_FEATURE_MWAIT)) - buf[2] &= ~(ACPI_PDC_C_C2C3_FFH); - - obj->type = ACPI_TYPE_BUFFER; - obj->buffer.length = 12; - obj->buffer.pointer = (u8 *) buf; - obj_list->count = 1; - obj_list->pointer = obj; - pr->pdc = obj_list; - - return; -} - - -/* Initialize _PDC data based on the CPU vendor */ -void arch_acpi_processor_init_pdc(struct acpi_processor *pr) -{ - struct cpuinfo_x86 *c = &cpu_data(pr->id); - - pr->pdc = NULL; - if (c->x86_vendor == X86_VENDOR_INTEL || - c->x86_vendor == X86_VENDOR_CENTAUR) - init_intel_pdc(pr, c); - - return; -} - -EXPORT_SYMBOL(arch_acpi_processor_init_pdc); - -void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr) -{ - if (pr->pdc) { - kfree(pr->pdc->pointer->buffer.pointer); - kfree(pr->pdc->pointer); - kfree(pr->pdc); - pr->pdc = NULL; - } -} - -EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc); diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 82e508677b9..f9961034e55 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -162,6 +162,8 @@ static int __init acpi_sleep_setup(char *str) #endif if (strncmp(str, "old_ordering", 12) == 0) acpi_old_suspend_ordering(); + if (strncmp(str, "sci_force_enable", 16) == 0) + acpi_set_sci_en_on_resume(); str = strchr(str, ','); if (str != NULL) str += strspn(str, ", \t"); diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 1dca9c34eae..fb490ce7dd5 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -138,6 +138,11 @@ int amd_iommus_present; bool amd_iommu_np_cache __read_mostly; /* + * Set to true if ACPI table parsing and hardware intialization went properly + */ +static bool amd_iommu_initialized; + +/* * List of protection domains - used during resume */ LIST_HEAD(amd_iommu_pd_list); @@ -929,6 +934,8 @@ static int __init init_iommu_all(struct acpi_table_header *table) } WARN_ON(p != end); + amd_iommu_initialized = true; + return 0; } @@ -1263,6 +1270,9 @@ static int __init amd_iommu_init(void) if (acpi_table_parse("IVRS", init_iommu_all) != 0) goto free; + if (!amd_iommu_initialized) + goto free; + if (acpi_table_parse("IVRS", init_memory_definitions) != 0) goto free; diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index d56b0efb205..5f92494dab6 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -629,8 +629,10 @@ void __init uv_system_init(void) uv_rtc_init(); for_each_present_cpu(cpu) { + int apicid = per_cpu(x86_cpu_to_apicid, cpu); + nid = cpu_to_node(cpu); - pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu)); + pnode = uv_apicid_to_pnode(apicid); blade = boot_pnode_to_blade(pnode); lcpu = uv_blade_info[blade].nr_possible_cpus; uv_blade_info[blade].nr_possible_cpus++; @@ -651,15 +653,13 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; uv_cpu_hub_info(cpu)->coherency_domain_number = sn_coherency_id; - uv_cpu_hub_info(cpu)->scir.offset = SCIR_LOCAL_MMR_BASE + lcpu; + uv_cpu_hub_info(cpu)->scir.offset = uv_scir_offset(apicid); uv_node_to_blade[nid] = blade; uv_cpu_to_blade[cpu] = blade; max_pnode = max(pnode, max_pnode); - printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, " - "lcpu %d, blade %d\n", - cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid, - lcpu, blade); + printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, lcpu %d, blade %d\n", + cpu, apicid, pnode, nid, lcpu, blade); } /* Add blade/pnode info for nodes without cpus */ diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index f28decf8dde..1b1920fa7c8 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -190,9 +190,11 @@ static void do_drv_write(void *_cmd) static void drv_read(struct drv_cmd *cmd) { + int err; cmd->val = 0; - smp_call_function_single(cpumask_any(cmd->mask), do_drv_read, cmd, 1); + err = smp_call_function_any(cmd->mask, do_drv_read, cmd, 1); + WARN_ON_ONCE(err); /* smp_call_function_any() was buggy? */ } static void drv_write(struct drv_cmd *cmd) diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index c223b7e895d..d616c06e99b 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -2347,7 +2347,7 @@ perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry) callchain_store(entry, PERF_CONTEXT_KERNEL); callchain_store(entry, regs->ip); - dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry); + dump_trace(NULL, regs, NULL, regs->bp, &backtrace_ops, entry); } /* diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 844c02c65fc..0c863243309 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -394,7 +394,7 @@ static enum ucode_state microcode_update_cpu(int cpu) struct ucode_cpu_info *uci = ucode_cpu_info + cpu; enum ucode_state ustate; - if (uci->valid && uci->mc) + if (uci->valid) ustate = microcode_resume_cpu(cpu); else ustate = microcode_init_cpu(cpu); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 98c2cdeb599..c6ee241c8a9 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -103,8 +103,8 @@ void show_regs_common(void) if (!product) product = ""; - printk("\n"); - printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n", + printk(KERN_CONT "\n"); + printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n", current->pid, current->comm, print_tainted(), init_utsname()->release, (int)strcspn(init_utsname()->version, " "), diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 9c517b5858f..37ad1e046aa 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -139,16 +139,16 @@ void __show_regs(struct pt_regs *regs, int all) show_regs_common(); - printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n", + printk(KERN_DEFAULT "EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n", (u16)regs->cs, regs->ip, regs->flags, smp_processor_id()); print_symbol("EIP is at %s\n", regs->ip); - printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", + printk(KERN_DEFAULT "EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", regs->ax, regs->bx, regs->cx, regs->dx); - printk("ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n", + printk(KERN_DEFAULT "ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n", regs->si, regs->di, regs->bp, sp); - printk(" DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n", + printk(KERN_DEFAULT " DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n", (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, ss); if (!all) @@ -158,19 +158,19 @@ void __show_regs(struct pt_regs *regs, int all) cr2 = read_cr2(); cr3 = read_cr3(); cr4 = read_cr4_safe(); - printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", + printk(KERN_DEFAULT "CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", cr0, cr2, cr3, cr4); get_debugreg(d0, 0); get_debugreg(d1, 1); get_debugreg(d2, 2); get_debugreg(d3, 3); - printk("DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n", + printk(KERN_DEFAULT "DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n", d0, d1, d2, d3); get_debugreg(d6, 6); get_debugreg(d7, 7); - printk("DR6: %08lx DR7: %08lx\n", + printk(KERN_DEFAULT "DR6: %08lx DR7: %08lx\n", d6, d7); } diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 52fbd0c6019..f9e033150cd 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -161,19 +161,19 @@ void __show_regs(struct pt_regs *regs, int all) unsigned int ds, cs, es; show_regs_common(); - printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip); + printk(KERN_DEFAULT "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip); printk_address(regs->ip, 1); - printk(KERN_INFO "RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, + printk(KERN_DEFAULT "RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->sp, regs->flags); - printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n", + printk(KERN_DEFAULT "RAX: %016lx RBX: %016lx RCX: %016lx\n", regs->ax, regs->bx, regs->cx); - printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n", + printk(KERN_DEFAULT "RDX: %016lx RSI: %016lx RDI: %016lx\n", regs->dx, regs->si, regs->di); - printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n", + printk(KERN_DEFAULT "RBP: %016lx R08: %016lx R09: %016lx\n", regs->bp, regs->r8, regs->r9); - printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n", + printk(KERN_DEFAULT "R10: %016lx R11: %016lx R12: %016lx\n", regs->r10, regs->r11, regs->r12); - printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n", + printk(KERN_DEFAULT "R13: %016lx R14: %016lx R15: %016lx\n", regs->r13, regs->r14, regs->r15); asm("movl %%ds,%0" : "=r" (ds)); @@ -194,21 +194,21 @@ void __show_regs(struct pt_regs *regs, int all) cr3 = read_cr3(); cr4 = read_cr4(); - printk(KERN_INFO "FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", + printk(KERN_DEFAULT "FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", fs, fsindex, gs, gsindex, shadowgs); - printk(KERN_INFO "CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, + printk(KERN_DEFAULT "CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, es, cr0); - printk(KERN_INFO "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, + printk(KERN_DEFAULT "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, cr4); get_debugreg(d0, 0); get_debugreg(d1, 1); get_debugreg(d2, 2); - printk(KERN_INFO "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2); + printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2); get_debugreg(d3, 3); get_debugreg(d6, 6); get_debugreg(d7, 7); - printk(KERN_INFO "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7); + printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7); } void show_regs(struct pt_regs *regs) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index cd60c0bd1b3..3063a0c4858 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1150,6 +1150,7 @@ void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu) hrtimer_cancel(&apic->lapic_timer.timer); update_divide_count(apic); start_apic_timer(apic); + apic->irr_pending = true; } void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu) diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index a6017132fba..58a0f1e8859 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -455,8 +455,6 @@ out_unlock: static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva) { struct kvm_shadow_walk_iterator iterator; - pt_element_t gpte; - gpa_t pte_gpa = -1; int level; u64 *sptep; int need_flush = 0; @@ -470,10 +468,6 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva) if (level == PT_PAGE_TABLE_LEVEL || ((level == PT_DIRECTORY_LEVEL && is_large_pte(*sptep))) || ((level == PT_PDPE_LEVEL && is_large_pte(*sptep)))) { - struct kvm_mmu_page *sp = page_header(__pa(sptep)); - - pte_gpa = (sp->gfn << PAGE_SHIFT); - pte_gpa += (sptep - sp->spt) * sizeof(pt_element_t); if (is_shadow_present_pte(*sptep)) { rmap_remove(vcpu->kvm, sptep); @@ -492,18 +486,6 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva) if (need_flush) kvm_flush_remote_tlbs(vcpu->kvm); spin_unlock(&vcpu->kvm->mmu_lock); - - if (pte_gpa == -1) - return; - if (kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &gpte, - sizeof(pt_element_t))) - return; - if (is_present_gpte(gpte) && (gpte & PT_ACCESSED_MASK)) { - if (mmu_topup_memory_caches(vcpu)) - return; - kvm_mmu_pte_write(vcpu, pte_gpa, (const u8 *)&gpte, - sizeof(pt_element_t), 0); - } } static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9d068966fb2..6651dbf5867 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1913,7 +1913,8 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu, events->sipi_vector = vcpu->arch.sipi_vector; - events->flags = 0; + events->flags = (KVM_VCPUEVENT_VALID_NMI_PENDING + | KVM_VCPUEVENT_VALID_SIPI_VECTOR); vcpu_put(vcpu); } @@ -1921,7 +1922,8 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu, static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu, struct kvm_vcpu_events *events) { - if (events->flags) + if (events->flags & ~(KVM_VCPUEVENT_VALID_NMI_PENDING + | KVM_VCPUEVENT_VALID_SIPI_VECTOR)) return -EINVAL; vcpu_load(vcpu); @@ -1938,10 +1940,12 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu, kvm_pic_clear_isr_ack(vcpu->kvm); vcpu->arch.nmi_injected = events->nmi.injected; - vcpu->arch.nmi_pending = events->nmi.pending; + if (events->flags & KVM_VCPUEVENT_VALID_NMI_PENDING) + vcpu->arch.nmi_pending = events->nmi.pending; kvm_x86_ops->set_nmi_mask(vcpu, events->nmi.masked); - vcpu->arch.sipi_vector = events->sipi_vector; + if (events->flags & KVM_VCPUEVENT_VALID_SIPI_VECTOR) + vcpu->arch.sipi_vector = events->sipi_vector; vcpu_put(vcpu); diff --git a/arch/x86/mm/kmemcheck/error.c b/arch/x86/mm/kmemcheck/error.c index 4901d0dafda..af3b6c8a436 100644 --- a/arch/x86/mm/kmemcheck/error.c +++ b/arch/x86/mm/kmemcheck/error.c @@ -106,26 +106,25 @@ void kmemcheck_error_recall(void) switch (e->type) { case KMEMCHECK_ERROR_INVALID_ACCESS: - printk(KERN_ERR "WARNING: kmemcheck: Caught %d-bit read " - "from %s memory (%p)\n", + printk(KERN_WARNING "WARNING: kmemcheck: Caught %d-bit read from %s memory (%p)\n", 8 * e->size, e->state < ARRAY_SIZE(desc) ? desc[e->state] : "(invalid shadow state)", (void *) e->address); - printk(KERN_INFO); + printk(KERN_WARNING); for (i = 0; i < SHADOW_COPY_SIZE; ++i) - printk("%02x", e->memory_copy[i]); - printk("\n"); + printk(KERN_CONT "%02x", e->memory_copy[i]); + printk(KERN_CONT "\n"); - printk(KERN_INFO); + printk(KERN_WARNING); for (i = 0; i < SHADOW_COPY_SIZE; ++i) { if (e->shadow_copy[i] < ARRAY_SIZE(short_desc)) - printk(" %c", short_desc[e->shadow_copy[i]]); + printk(KERN_CONT " %c", short_desc[e->shadow_copy[i]]); else - printk(" ?"); + printk(KERN_CONT " ?"); } - printk("\n"); - printk(KERN_INFO "%*c\n", 2 + 2 + printk(KERN_CONT "\n"); + printk(KERN_WARNING "%*c\n", 2 + 2 * (int) (e->address & (SHADOW_COPY_SIZE - 1)), '^'); break; case KMEMCHECK_ERROR_BUG: diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c index 145df00e038..f939d603adf 100644 --- a/arch/x86/pci/bus_numa.c +++ b/arch/x86/pci/bus_numa.c @@ -51,7 +51,7 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) } } -void __init update_res(struct pci_root_info *info, size_t start, +void __devinit update_res(struct pci_root_info *info, size_t start, size_t end, unsigned long flags, int merge) { int i; diff --git a/arch/x86/tools/chkobjdump.awk b/arch/x86/tools/chkobjdump.awk index 5bbb5a33f22..fd1ab80be0d 100644 --- a/arch/x86/tools/chkobjdump.awk +++ b/arch/x86/tools/chkobjdump.awk @@ -8,14 +8,24 @@ BEGIN { od_sver = 19; } -/^GNU/ { - split($3, ver, "."); +/^GNU objdump/ { + verstr = "" + for (i = 3; i <= NF; i++) + if (match($(i), "^[0-9]")) { + verstr = $(i); + break; + } + if (verstr == "") { + printf("Warning: Failed to find objdump version number.\n"); + exit 0; + } + split(verstr, ver, "."); if (ver[1] > od_ver || (ver[1] == od_ver && ver[2] >= od_sver)) { exit 1; } else { printf("Warning: objdump version %s is older than %d.%d\n", - $4, od_ver, od_sver); + verstr, od_ver, od_sver); print("Warning: Skipping posttest."); # Logic is inverted, because we just skip test without error. exit 0; diff --git a/block/blk-barrier.c b/block/blk-barrier.c index 8873b9b439f..8618d8996fe 100644 --- a/block/blk-barrier.c +++ b/block/blk-barrier.c @@ -402,7 +402,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, * our current implementations need. If we'll ever need * more the interface will need revisiting. */ - page = alloc_page(GFP_KERNEL | __GFP_ZERO); + page = alloc_page(gfp_mask | __GFP_ZERO); if (!page) goto out_free_bio; if (bio_add_pc_page(q, bio, page, sector_size, 0) < sector_size) diff --git a/block/blk-settings.c b/block/blk-settings.c index 6ae118d6e19..d52d4adc440 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -505,21 +505,30 @@ static unsigned int lcm(unsigned int a, unsigned int b) /** * blk_stack_limits - adjust queue_limits for stacked devices - * @t: the stacking driver limits (top) - * @b: the underlying queue limits (bottom) + * @t: the stacking driver limits (top device) + * @b: the underlying queue limits (bottom, component device) * @offset: offset to beginning of data within component device * * Description: - * Merges two queue_limit structs. Returns 0 if alignment didn't - * change. Returns -1 if adding the bottom device caused - * misalignment. + * This function is used by stacking drivers like MD and DM to ensure + * that all component devices have compatible block sizes and + * alignments. The stacking driver must provide a queue_limits + * struct (top) and then iteratively call the stacking function for + * all component (bottom) devices. The stacking function will + * attempt to combine the values and ensure proper alignment. + * + * Returns 0 if the top and bottom queue_limits are compatible. The + * top device's block sizes and alignment offsets may be adjusted to + * ensure alignment with the bottom device. If no compatible sizes + * and alignments exist, -1 is returned and the resulting top + * queue_limits will have the misaligned flag set to indicate that + * the alignment_offset is undefined. */ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset) { - int ret; - - ret = 0; + sector_t alignment; + unsigned int top, bottom; t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors); t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors); @@ -537,6 +546,22 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->max_segment_size = min_not_zero(t->max_segment_size, b->max_segment_size); + alignment = queue_limit_alignment_offset(b, offset); + + /* Bottom device has different alignment. Check that it is + * compatible with the current top alignment. + */ + if (t->alignment_offset != alignment) { + + top = max(t->physical_block_size, t->io_min) + + t->alignment_offset; + bottom = max(b->physical_block_size, b->io_min) + alignment; + + /* Verify that top and bottom intervals line up */ + if (max(top, bottom) & (min(top, bottom) - 1)) + t->misaligned = 1; + } + t->logical_block_size = max(t->logical_block_size, b->logical_block_size); @@ -544,54 +569,64 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, b->physical_block_size); t->io_min = max(t->io_min, b->io_min); + t->io_opt = lcm(t->io_opt, b->io_opt); + t->no_cluster |= b->no_cluster; t->discard_zeroes_data &= b->discard_zeroes_data; - /* Bottom device offset aligned? */ - if (offset && - (offset & (b->physical_block_size - 1)) != b->alignment_offset) { + /* Physical block size a multiple of the logical block size? */ + if (t->physical_block_size & (t->logical_block_size - 1)) { + t->physical_block_size = t->logical_block_size; t->misaligned = 1; - ret = -1; } - /* - * Temporarily disable discard granularity. It's currently buggy - * since we default to 0 for discard_granularity, hence this - * "failure" will always trigger for non-zero offsets. - */ -#if 0 - if (offset && - (offset & (b->discard_granularity - 1)) != b->discard_alignment) { - t->discard_misaligned = 1; - ret = -1; + /* Minimum I/O a multiple of the physical block size? */ + if (t->io_min & (t->physical_block_size - 1)) { + t->io_min = t->physical_block_size; + t->misaligned = 1; } -#endif - - /* If top has no alignment offset, inherit from bottom */ - if (!t->alignment_offset) - t->alignment_offset = - b->alignment_offset & (b->physical_block_size - 1); - if (!t->discard_alignment) - t->discard_alignment = - b->discard_alignment & (b->discard_granularity - 1); - - /* Top device aligned on logical block boundary? */ - if (t->alignment_offset & (t->logical_block_size - 1)) { + /* Optimal I/O a multiple of the physical block size? */ + if (t->io_opt & (t->physical_block_size - 1)) { + t->io_opt = 0; t->misaligned = 1; - ret = -1; } - /* Find lcm() of optimal I/O size and granularity */ - t->io_opt = lcm(t->io_opt, b->io_opt); - t->discard_granularity = lcm(t->discard_granularity, - b->discard_granularity); + /* Find lowest common alignment_offset */ + t->alignment_offset = lcm(t->alignment_offset, alignment) + & (max(t->physical_block_size, t->io_min) - 1); - /* Verify that optimal I/O size is a multiple of io_min */ - if (t->io_min && t->io_opt % t->io_min) - ret = -1; + /* Verify that new alignment_offset is on a logical block boundary */ + if (t->alignment_offset & (t->logical_block_size - 1)) + t->misaligned = 1; + + /* Discard alignment and granularity */ + if (b->discard_granularity) { + unsigned int granularity = b->discard_granularity; + offset &= granularity - 1; + + alignment = (granularity + b->discard_alignment - offset) + & (granularity - 1); + + if (t->discard_granularity != 0 && + t->discard_alignment != alignment) { + top = t->discard_granularity + t->discard_alignment; + bottom = b->discard_granularity + alignment; + + /* Verify that top and bottom intervals line up */ + if (max(top, bottom) & (min(top, bottom) - 1)) + t->discard_misaligned = 1; + } + + t->max_discard_sectors = min_not_zero(t->max_discard_sectors, + b->max_discard_sectors); + t->discard_granularity = max(t->discard_granularity, + b->discard_granularity); + t->discard_alignment = lcm(t->discard_alignment, alignment) & + (t->discard_granularity - 1); + } - return ret; + return t->misaligned ? -1 : 0; } EXPORT_SYMBOL(blk_stack_limits); diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index e2f80463ed0..918c7fd9aeb 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -208,8 +208,6 @@ struct cfq_data { /* Root service tree for cfq_groups */ struct cfq_rb_root grp_service_tree; struct cfq_group root_group; - /* Number of active cfq groups on group service tree */ - int nr_groups; /* * The priority currently being served @@ -294,8 +292,7 @@ static struct cfq_group *cfq_get_next_cfqg(struct cfq_data *cfqd); static struct cfq_rb_root *service_tree_for(struct cfq_group *cfqg, enum wl_prio_t prio, - enum wl_type_t type, - struct cfq_data *cfqd) + enum wl_type_t type) { if (!cfqg) return NULL; @@ -842,7 +839,6 @@ cfq_group_service_tree_add(struct cfq_data *cfqd, struct cfq_group *cfqg) __cfq_group_service_tree_add(st, cfqg); cfqg->on_st = true; - cfqd->nr_groups++; st->total_weight += cfqg->weight; } @@ -863,7 +859,6 @@ cfq_group_service_tree_del(struct cfq_data *cfqd, struct cfq_group *cfqg) cfq_log_cfqg(cfqd, cfqg, "del_from_rr group"); cfqg->on_st = false; - cfqd->nr_groups--; st->total_weight -= cfqg->weight; if (!RB_EMPTY_NODE(&cfqg->rb_node)) cfq_rb_erase(&cfqg->rb_node, st); @@ -1150,7 +1145,7 @@ static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq, #endif service_tree = service_tree_for(cfqq->cfqg, cfqq_prio(cfqq), - cfqq_type(cfqq), cfqd); + cfqq_type(cfqq)); if (cfq_class_idle(cfqq)) { rb_key = CFQ_IDLE_DELAY; parent = rb_last(&service_tree->rb); @@ -1513,9 +1508,6 @@ static int cfq_allow_merge(struct request_queue *q, struct request *rq, struct cfq_io_context *cic; struct cfq_queue *cfqq; - /* Deny merge if bio and rq don't belong to same cfq group */ - if ((RQ_CFQQ(rq))->cfqg != cfq_get_cfqg(cfqd, 0)) - return false; /* * Disallow merge of a sync bio into an async request. */ @@ -1616,7 +1608,7 @@ static struct cfq_queue *cfq_get_next_queue(struct cfq_data *cfqd) { struct cfq_rb_root *service_tree = service_tree_for(cfqd->serving_group, cfqd->serving_prio, - cfqd->serving_type, cfqd); + cfqd->serving_type); if (!cfqd->rq_queued) return NULL; @@ -1675,13 +1667,17 @@ static inline sector_t cfq_dist_from_last(struct cfq_data *cfqd, #define CFQQ_SEEKY(cfqq) ((cfqq)->seek_mean > CFQQ_SEEK_THR) static inline int cfq_rq_close(struct cfq_data *cfqd, struct cfq_queue *cfqq, - struct request *rq) + struct request *rq, bool for_preempt) { sector_t sdist = cfqq->seek_mean; if (!sample_valid(cfqq->seek_samples)) sdist = CFQQ_SEEK_THR; + /* if seek_mean is big, using it as close criteria is meaningless */ + if (sdist > CFQQ_SEEK_THR && !for_preempt) + sdist = CFQQ_SEEK_THR; + return cfq_dist_from_last(cfqd, rq) <= sdist; } @@ -1709,7 +1705,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, * will contain the closest sector. */ __cfqq = rb_entry(parent, struct cfq_queue, p_node); - if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq)) + if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq, false)) return __cfqq; if (blk_rq_pos(__cfqq->next_rq) < sector) @@ -1720,7 +1716,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, return NULL; __cfqq = rb_entry(node, struct cfq_queue, p_node); - if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq)) + if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq, false)) return __cfqq; return NULL; @@ -1963,8 +1959,7 @@ static void cfq_setup_merge(struct cfq_queue *cfqq, struct cfq_queue *new_cfqq) } static enum wl_type_t cfq_choose_wl(struct cfq_data *cfqd, - struct cfq_group *cfqg, enum wl_prio_t prio, - bool prio_changed) + struct cfq_group *cfqg, enum wl_prio_t prio) { struct cfq_queue *queue; int i; @@ -1972,24 +1967,9 @@ static enum wl_type_t cfq_choose_wl(struct cfq_data *cfqd, unsigned long lowest_key = 0; enum wl_type_t cur_best = SYNC_NOIDLE_WORKLOAD; - if (prio_changed) { - /* - * When priorities switched, we prefer starting - * from SYNC_NOIDLE (first choice), or just SYNC - * over ASYNC - */ - if (service_tree_for(cfqg, prio, cur_best, cfqd)->count) - return cur_best; - cur_best = SYNC_WORKLOAD; - if (service_tree_for(cfqg, prio, cur_best, cfqd)->count) - return cur_best; - - return ASYNC_WORKLOAD; - } - - for (i = 0; i < 3; ++i) { - /* otherwise, select the one with lowest rb_key */ - queue = cfq_rb_first(service_tree_for(cfqg, prio, i, cfqd)); + for (i = 0; i <= SYNC_WORKLOAD; ++i) { + /* select the one with lowest rb_key */ + queue = cfq_rb_first(service_tree_for(cfqg, prio, i)); if (queue && (!key_valid || time_before(queue->rb_key, lowest_key))) { lowest_key = queue->rb_key; @@ -2003,8 +1983,6 @@ static enum wl_type_t cfq_choose_wl(struct cfq_data *cfqd, static void choose_service_tree(struct cfq_data *cfqd, struct cfq_group *cfqg) { - enum wl_prio_t previous_prio = cfqd->serving_prio; - bool prio_changed; unsigned slice; unsigned count; struct cfq_rb_root *st; @@ -2032,24 +2010,19 @@ static void choose_service_tree(struct cfq_data *cfqd, struct cfq_group *cfqg) * (SYNC, SYNC_NOIDLE, ASYNC), and to compute a workload * expiration time */ - prio_changed = (cfqd->serving_prio != previous_prio); - st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type, - cfqd); + st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type); count = st->count; /* - * If priority didn't change, check workload expiration, - * and that we still have other queues ready + * check workload expiration, and that we still have other queues ready */ - if (!prio_changed && count && - !time_after(jiffies, cfqd->workload_expires)) + if (count && !time_after(jiffies, cfqd->workload_expires)) return; /* otherwise select new workload type */ cfqd->serving_type = - cfq_choose_wl(cfqd, cfqg, cfqd->serving_prio, prio_changed); - st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type, - cfqd); + cfq_choose_wl(cfqd, cfqg, cfqd->serving_prio); + st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type); count = st->count; /* @@ -3143,7 +3116,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, * if this request is as-good as one we would expect from the * current cfqq, let it preempt */ - if (cfq_rq_close(cfqd, cfqq, rq)) + if (cfq_rq_close(cfqd, cfqq, rq, true)) return true; return false; diff --git a/crypto/async_tx/raid6test.c b/crypto/async_tx/raid6test.c index 3ec27c7e62e..f84f6b4301d 100644 --- a/crypto/async_tx/raid6test.c +++ b/crypto/async_tx/raid6test.c @@ -214,6 +214,13 @@ static int raid6_test(void) err += test(4, &tests); if (NDISKS > 5) err += test(5, &tests); + /* the 11 and 12 disk cases are special for ioatdma (p-disabled + * q-continuation without extended descriptor) + */ + if (NDISKS > 12) { + err += test(11, &tests); + err += test(12, &tests); + } err += test(NDISKS, &tests); pr("\n"); diff --git a/drivers/Kconfig b/drivers/Kconfig index 8a07363417e..368ae6d3a09 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -28,7 +28,7 @@ source "drivers/md/Kconfig" source "drivers/message/fusion/Kconfig" -source "drivers/ieee1394/Kconfig" +source "drivers/firewire/Kconfig" source "drivers/message/i2o/Kconfig" diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index c7b10b4298e..66cc3f36a95 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -32,6 +32,7 @@ acpi-$(CONFIG_ACPI_SLEEP) += proc.o # acpi-y += bus.o glue.o acpi-y += scan.o +acpi-y += processor_pdc.o acpi-y += ec.o acpi-$(CONFIG_ACPI_DOCK) += dock.o acpi-y += pci_root.o pci_link.o pci_irq.o pci_bind.o diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 23e5a0519af..2815df66f6f 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -185,6 +185,12 @@ static int __init dmi_disable_osi_vista(const struct dmi_system_id *d) acpi_osi_setup("!Windows 2006"); return 0; } +static int __init dmi_disable_osi_win7(const struct dmi_system_id *d) +{ + printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); + acpi_osi_setup("!Windows 2009"); + return 0; +} static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { { @@ -211,6 +217,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"), }, }, + { + .callback = dmi_disable_osi_win7, + .ident = "ASUS K50IJ", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "K50IJ"), + }, + }, /* * BIOS invocation of _OSI(Linux) is almost always a BIOS bug. diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 65f7e335f12..cf761b904e4 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -397,6 +397,7 @@ acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context) union acpi_object *out_obj; u8 uuid[16]; u32 errors; + struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; if (!context) return AE_ERROR; @@ -419,16 +420,16 @@ acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context) in_params[3].buffer.length = context->cap.length; in_params[3].buffer.pointer = context->cap.pointer; - status = acpi_evaluate_object(handle, "_OSC", &input, &context->ret); + status = acpi_evaluate_object(handle, "_OSC", &input, &output); if (ACPI_FAILURE(status)) return status; - /* return buffer should have the same length as cap buffer */ - if (context->ret.length != context->cap.length) + if (!output.length) return AE_NULL_OBJECT; - out_obj = context->ret.pointer; - if (out_obj->type != ACPI_TYPE_BUFFER) { + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER + || out_obj->buffer.length != context->cap.length) { acpi_print_osc_error(handle, context, "_OSC evaluation returned wrong type"); status = AE_TYPE; @@ -457,11 +458,20 @@ acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context) goto out_kfree; } out_success: - return AE_OK; + context->ret.length = out_obj->buffer.length; + context->ret.pointer = kmalloc(context->ret.length, GFP_KERNEL); + if (!context->ret.pointer) { + status = AE_NO_MEMORY; + goto out_kfree; + } + memcpy(context->ret.pointer, out_obj->buffer.pointer, + context->ret.length); + status = AE_OK; out_kfree: - kfree(context->ret.pointer); - context->ret.pointer = NULL; + kfree(output.pointer); + if (status != AE_OK) + context->ret.pointer = NULL; return status; } EXPORT_SYMBOL(acpi_run_osc); @@ -888,6 +898,8 @@ static int __init acpi_bus_init(void) goto error1; } + acpi_early_processor_set_pdc(); + /* * Maybe EC region is required at bus_scan/acpi_get_devices. So it * is necessary to enable it as early as possible. diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 75b147f5c8f..fd1801bdee6 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -916,6 +916,7 @@ static int ec_validate_ecdt(const struct dmi_system_id *id) /* MSI EC needs special treatment, enable it */ static int ec_flag_msi(const struct dmi_system_id *id) { + printk(KERN_DEBUG PREFIX "Detected MSI hardware, enabling workarounds.\n"); EC_FLAGS_MSI = 1; EC_FLAGS_VALIDATE_ECDT = 1; return 0; @@ -928,8 +929,13 @@ static struct dmi_system_id __initdata ec_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "JFL92") }, NULL}, { ec_flag_msi, "MSI hardware", { - DMI_MATCH(DMI_BIOS_VENDOR, "Micro-Star"), - DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-Star") }, NULL}, + DMI_MATCH(DMI_BIOS_VENDOR, "Micro-Star")}, NULL}, + { + ec_flag_msi, "MSI hardware", { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star")}, NULL}, + { + ec_flag_msi, "MSI hardware", { + DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-Star")}, NULL}, { ec_validate_ecdt, "ASUS hardware", { DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL}, diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 074cf8682d5..cb28e0502ac 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -43,6 +43,7 @@ int acpi_power_transition(struct acpi_device *device, int state); extern int acpi_power_nocheck; int acpi_wakeup_device_init(void); +void acpi_early_processor_set_pdc(void); /* -------------------------------------------------------------------------- Embedded Controller diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 41731236f9a..9863c98c81b 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -124,29 +124,6 @@ static const struct file_operations acpi_processor_info_fops = { DEFINE_PER_CPU(struct acpi_processor *, processors); struct acpi_processor_errata errata __read_mostly; -static int set_no_mwait(const struct dmi_system_id *id) -{ - printk(KERN_NOTICE PREFIX "%s detected - " - "disabling mwait for CPU C-states\n", id->ident); - idle_nomwait = 1; - return 0; -} - -static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = { - { - set_no_mwait, "IFL91 board", { - DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"), - DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"), - DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL}, - { - set_no_mwait, "Extensa 5220", { - DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_VERSION, "0100"), - DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL}, - {}, -}; /* -------------------------------------------------------------------------- Errata Handling @@ -277,45 +254,6 @@ static int acpi_processor_errata(struct acpi_processor *pr) } /* -------------------------------------------------------------------------- - Common ACPI processor functions - -------------------------------------------------------------------------- */ - -/* - * _PDC is required for a BIOS-OS handshake for most of the newer - * ACPI processor features. - */ -static int acpi_processor_set_pdc(struct acpi_processor *pr) -{ - struct acpi_object_list *pdc_in = pr->pdc; - acpi_status status = AE_OK; - - - if (!pdc_in) - return status; - if (idle_nomwait) { - /* - * If mwait is disabled for CPU C-states, the C2C3_FFH access - * mode will be disabled in the parameter of _PDC object. - * Of course C1_FFH access mode will also be disabled. - */ - union acpi_object *obj; - u32 *buffer = NULL; - - obj = pdc_in->pointer; - buffer = (u32 *)(obj->buffer.pointer); - buffer[2] &= ~(ACPI_PDC_C_C2C3_FFH | ACPI_PDC_C_C1_FFH); - - } - status = acpi_evaluate_object(pr->handle, "_PDC", pdc_in, NULL); - - if (ACPI_FAILURE(status)) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Could not evaluate _PDC, using legacy perf. control...\n")); - - return status; -} - -/* -------------------------------------------------------------------------- FS Interface (/proc) -------------------------------------------------------------------------- */ @@ -825,9 +763,7 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) } /* _PDC call should be done before doing anything else (if reqd.). */ - arch_acpi_processor_init_pdc(pr); - acpi_processor_set_pdc(pr); - arch_acpi_processor_cleanup_pdc(pr); + acpi_processor_set_pdc(pr->handle); #ifdef CONFIG_CPU_FREQ acpi_processor_ppc_has_changed(pr, 0); @@ -1145,11 +1081,6 @@ static int __init acpi_processor_init(void) if (!acpi_processor_dir) return -ENOMEM; #endif - /* - * Check whether the system is DMI table. If yes, OSPM - * should not use mwait for CPU-states. - */ - dmi_check_system(processor_idle_dmi_table); result = cpuidle_register_driver(&acpi_idle_driver); if (result < 0) goto out_proc; diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c new file mode 100644 index 00000000000..30e4dc0cdf3 --- /dev/null +++ b/drivers/acpi/processor_pdc.c @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2005 Intel Corporation + * Copyright (C) 2009 Hewlett-Packard Development Company, L.P. + * + * Alex Chiang <achiang@hp.com> + * - Unified x86/ia64 implementations + * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> + * - Added _PDC for platforms with Intel CPUs + */ +#include <linux/dmi.h> + +#include <acpi/acpi_drivers.h> +#include <acpi/processor.h> + +#include "internal.h" + +#define PREFIX "ACPI: " +#define _COMPONENT ACPI_PROCESSOR_COMPONENT +ACPI_MODULE_NAME("processor_pdc"); + +static int set_no_mwait(const struct dmi_system_id *id) +{ + printk(KERN_NOTICE PREFIX "%s detected - " + "disabling mwait for CPU C-states\n", id->ident); + idle_nomwait = 1; + return 0; +} + +static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = { + { + set_no_mwait, "IFL91 board", { + DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"), + DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"), + DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL}, + { + set_no_mwait, "Extensa 5220", { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_VERSION, "0100"), + DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL}, + {}, +}; + +static void acpi_set_pdc_bits(u32 *buf) +{ + buf[0] = ACPI_PDC_REVISION_ID; + buf[1] = 1; + + /* Enable coordination with firmware's _TSD info */ + buf[2] = ACPI_PDC_SMP_T_SWCOORD; + + /* Twiddle arch-specific bits needed for _PDC */ + arch_acpi_set_pdc_bits(buf); +} + +static struct acpi_object_list *acpi_processor_alloc_pdc(void) +{ + struct acpi_object_list *obj_list; + union acpi_object *obj; + u32 *buf; + + /* allocate and initialize pdc. It will be used later. */ + obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL); + if (!obj_list) { + printk(KERN_ERR "Memory allocation error\n"); + return NULL; + } + + obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL); + if (!obj) { + printk(KERN_ERR "Memory allocation error\n"); + kfree(obj_list); + return NULL; + } + + buf = kmalloc(12, GFP_KERNEL); + if (!buf) { + printk(KERN_ERR "Memory allocation error\n"); + kfree(obj); + kfree(obj_list); + return NULL; + } + + acpi_set_pdc_bits(buf); + + obj->type = ACPI_TYPE_BUFFER; + obj->buffer.length = 12; + obj->buffer.pointer = (u8 *) buf; + obj_list->count = 1; + obj_list->pointer = obj; + + return obj_list; +} + +/* + * _PDC is required for a BIOS-OS handshake for most of the newer + * ACPI processor features. + */ +static int +acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in) +{ + acpi_status status = AE_OK; + + if (idle_nomwait) { + /* + * If mwait is disabled for CPU C-states, the C2C3_FFH access + * mode will be disabled in the parameter of _PDC object. + * Of course C1_FFH access mode will also be disabled. + */ + union acpi_object *obj; + u32 *buffer = NULL; + + obj = pdc_in->pointer; + buffer = (u32 *)(obj->buffer.pointer); + buffer[2] &= ~(ACPI_PDC_C_C2C3_FFH | ACPI_PDC_C_C1_FFH); + + } + status = acpi_evaluate_object(handle, "_PDC", pdc_in, NULL); + + if (ACPI_FAILURE(status)) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Could not evaluate _PDC, using legacy perf. control.\n")); + + return status; +} + +void acpi_processor_set_pdc(acpi_handle handle) +{ + struct acpi_object_list *obj_list; + + if (arch_has_acpi_pdc() == false) + return; + + obj_list = acpi_processor_alloc_pdc(); + if (!obj_list) + return; + + acpi_processor_eval_pdc(handle, obj_list); + + kfree(obj_list->pointer->buffer.pointer); + kfree(obj_list->pointer); + kfree(obj_list); +} +EXPORT_SYMBOL_GPL(acpi_processor_set_pdc); + +static acpi_status +early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + acpi_processor_set_pdc(handle); + return AE_OK; +} + +void acpi_early_processor_set_pdc(void) +{ + /* + * Check whether the system is DMI table. If yes, OSPM + * should not use mwait for CPU-states. + */ + dmi_check_system(processor_idle_dmi_table); + + acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, + early_init_pdc, NULL, NULL, NULL); +} diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 5f2c379ab7b..79d33d908b5 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -81,6 +81,23 @@ static int acpi_sleep_prepare(u32 acpi_state) #ifdef CONFIG_ACPI_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; /* + * According to the ACPI specification the BIOS should make sure that ACPI is + * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, + * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI + * on such systems during resume. Unfortunately that doesn't help in + * particularly pathological cases in which SCI_EN has to be set directly on + * resume, although the specification states very clearly that this flag is + * owned by the hardware. The set_sci_en_on_resume variable will be set in such + * cases. + */ +static bool set_sci_en_on_resume; + +void __init acpi_set_sci_en_on_resume(void) +{ + set_sci_en_on_resume = true; +} + +/* * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the * user to request that behavior by using the 'acpi_old_suspend_ordering' * kernel command line option that causes the following variable to be set. @@ -170,18 +187,6 @@ static void acpi_pm_end(void) #endif /* CONFIG_ACPI_SLEEP */ #ifdef CONFIG_SUSPEND -/* - * According to the ACPI specification the BIOS should make sure that ACPI is - * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, - * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI - * on such systems during resume. Unfortunately that doesn't help in - * particularly pathological cases in which SCI_EN has to be set directly on - * resume, although the specification states very clearly that this flag is - * owned by the hardware. The set_sci_en_on_resume variable will be set in such - * cases. - */ -static bool set_sci_en_on_resume; - extern void do_suspend_lowlevel(void); static u32 acpi_suspend_states[] = { diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 05dff631591..72e76b4b653 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -999,8 +999,10 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) sprintf(name, "acpi_video%d", count++); device->backlight = backlight_device_register(name, NULL, device, &acpi_backlight_ops); - device->backlight->props.max_brightness = device->brightness->count-3; kfree(name); + if (IS_ERR(device->backlight)) + return; + device->backlight->props.max_brightness = device->brightness->count-3; result = sysfs_create_link(&device->backlight->dev.kobj, &device->dev->dev.kobj, "device"); @@ -1979,6 +1981,10 @@ acpi_video_switch_brightness(struct acpi_video_device *device, int event) unsigned long long level_current, level_next; int result = -EINVAL; + /* no warning message if acpi_backlight=vendor is used */ + if (!acpi_video_backlight_support()) + return 0; + if (!device->brightness) goto out; diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 85844d05384..56c6374a398 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -40,7 +40,6 @@ config ATA_VERBOSE_ERROR config ATA_ACPI bool "ATA ACPI Support" depends on ACPI && PCI - select ACPI_DOCK default y help This option adds support for ATA-related ACPI objects. diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 63c143e54a5..c0c5a43d9fb 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -703,9 +703,9 @@ int bus_add_driver(struct device_driver *drv) return 0; out_unregister: + kobject_put(&priv->kobj); kfree(drv->p); drv->p = NULL; - kobject_put(&priv->kobj); out_put_bus: bus_put(bus); return error; diff --git a/drivers/base/core.c b/drivers/base/core.c index f1290cbd135..28202577042 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -446,7 +446,8 @@ struct kset *devices_kset; * @dev: device. * @attr: device attribute descriptor. */ -int device_create_file(struct device *dev, struct device_attribute *attr) +int device_create_file(struct device *dev, + const struct device_attribute *attr) { int error = 0; if (dev) @@ -459,7 +460,8 @@ int device_create_file(struct device *dev, struct device_attribute *attr) * @dev: device. * @attr: device attribute descriptor. */ -void device_remove_file(struct device *dev, struct device_attribute *attr) +void device_remove_file(struct device *dev, + const struct device_attribute *attr) { if (dev) sysfs_remove_file(&dev->kobj, &attr->attr); @@ -470,7 +472,8 @@ void device_remove_file(struct device *dev, struct device_attribute *attr) * @dev: device. * @attr: device binary attribute descriptor. */ -int device_create_bin_file(struct device *dev, struct bin_attribute *attr) +int device_create_bin_file(struct device *dev, + const struct bin_attribute *attr) { int error = -EINVAL; if (dev) @@ -484,7 +487,8 @@ EXPORT_SYMBOL_GPL(device_create_bin_file); * @dev: device. * @attr: device binary attribute descriptor. */ -void device_remove_bin_file(struct device *dev, struct bin_attribute *attr) +void device_remove_bin_file(struct device *dev, + const struct bin_attribute *attr) { if (dev) sysfs_remove_bin_file(&dev->kobj, attr); @@ -905,8 +909,10 @@ int device_add(struct device *dev) dev->init_name = NULL; } - if (!dev_name(dev)) + if (!dev_name(dev)) { + error = -EINVAL; goto name_error; + } pr_debug("device: '%s': %s\n", dev_name(dev), __func__); diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c index 50375bb8e51..090dd485130 100644 --- a/drivers/base/devtmpfs.c +++ b/drivers/base/devtmpfs.c @@ -32,7 +32,7 @@ static int dev_mount = 1; static int dev_mount; #endif -static rwlock_t dirlock; +static DEFINE_MUTEX(dirlock); static int __init mount_param(char *str) { @@ -93,7 +93,7 @@ static int create_path(const char *nodepath) { int err; - read_lock(&dirlock); + mutex_lock(&dirlock); err = dev_mkdir(nodepath, 0755); if (err == -ENOENT) { char *path; @@ -101,8 +101,10 @@ static int create_path(const char *nodepath) /* parent directories do not exist, create them */ path = kstrdup(nodepath, GFP_KERNEL); - if (!path) - return -ENOMEM; + if (!path) { + err = -ENOMEM; + goto out; + } s = path; for (;;) { s = strchr(s, '/'); @@ -117,7 +119,8 @@ static int create_path(const char *nodepath) } kfree(path); } - read_unlock(&dirlock); +out: + mutex_unlock(&dirlock); return err; } @@ -229,7 +232,7 @@ static int delete_path(const char *nodepath) if (!path) return -ENOMEM; - write_lock(&dirlock); + mutex_lock(&dirlock); for (;;) { char *base; @@ -241,7 +244,7 @@ static int delete_path(const char *nodepath) if (err) break; } - write_unlock(&dirlock); + mutex_unlock(&dirlock); kfree(path); return err; @@ -352,8 +355,6 @@ int __init devtmpfs_init(void) int err; struct vfsmount *mnt; - rwlock_init(&dirlock); - err = register_filesystem(&dev_fs_type); if (err) { printk(KERN_ERR "devtmpfs: unable to register devtmpfs " diff --git a/drivers/base/driver.c b/drivers/base/driver.c index f367885a764..90c9fff09ea 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -98,7 +98,7 @@ EXPORT_SYMBOL_GPL(driver_find_device); * @attr: driver attribute descriptor. */ int driver_create_file(struct device_driver *drv, - struct driver_attribute *attr) + const struct driver_attribute *attr) { int error; if (drv) @@ -115,7 +115,7 @@ EXPORT_SYMBOL_GPL(driver_create_file); * @attr: driver attribute descriptor. */ void driver_remove_file(struct device_driver *drv, - struct driver_attribute *attr) + const struct driver_attribute *attr) { if (drv) sysfs_remove_file(&drv->p->kobj, &attr->attr); diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 9d2ee25deaf..58efaf2f125 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -441,6 +441,7 @@ error: platform_device_put(pdev); return ERR_PTR(retval); } +EXPORT_SYMBOL_GPL(platform_device_register_data); static int platform_drv_probe(struct device *_dev) { diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index eb4fa194394..ce1fa923c41 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -7101,7 +7101,7 @@ static struct DAC960_privdata DAC960_BA_privdata = { static struct DAC960_privdata DAC960_LP_privdata = { .HardwareType = DAC960_LP_Controller, - .FirmwareType = DAC960_LP_Controller, + .FirmwareType = DAC960_V2_Controller, .InterruptHandler = DAC960_LP_InterruptHandler, .MemoryWindowSize = DAC960_LP_RegisterWindowSize, }; diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index 13bb69d2abb..64a223b0cc2 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -735,21 +735,6 @@ diskstats(struct gendisk *disk, struct bio *bio, ulong duration, sector_t sector part_stat_unlock(); } -/* - * Ensure we don't create aliases in VI caches - */ -static inline void -killalias(struct bio *bio) -{ - struct bio_vec *bv; - int i; - - if (bio_data_dir(bio) == READ) - __bio_for_each_segment(bv, bio, i, 0) { - flush_dcache_page(bv->bv_page); - } -} - void aoecmd_ata_rsp(struct sk_buff *skb) { @@ -871,7 +856,7 @@ aoecmd_ata_rsp(struct sk_buff *skb) if (buf->flags & BUFFL_FAIL) bio_endio(buf->bio, -EIO); else { - killalias(buf->bio); + bio_flush_dcache_pages(buf->bio); bio_endio(buf->bio, 0); } mempool_free(buf, d->bufpool); diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 2312d782fe9..c9755876343 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -1490,7 +1490,7 @@ void drbd_bump_write_ordering(struct drbd_conf *mdev, enum write_ordering_e wo); /* drbd_proc.c */ extern struct proc_dir_entry *drbd_proc; -extern struct file_operations drbd_proc_fops; +extern const struct file_operations drbd_proc_fops; extern const char *drbd_conn_str(enum drbd_conns s); extern const char *drbd_role_str(enum drbd_role s); diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 157d1e4343c..9348f33f624 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -27,7 +27,6 @@ */ #include <linux/module.h> -#include <linux/version.h> #include <linux/drbd.h> #include <asm/uaccess.h> #include <asm/types.h> @@ -151,7 +150,7 @@ wait_queue_head_t drbd_pp_wait; DEFINE_RATELIMIT_STATE(drbd_ratelimit_state, 5 * HZ, 5); -static struct block_device_operations drbd_ops = { +static const struct block_device_operations drbd_ops = { .owner = THIS_MODULE, .open = drbd_open, .release = drbd_release, @@ -3623,7 +3622,7 @@ _drbd_fault_random(struct fault_random_state *rsp) { long refresh; - if (--rsp->count < 0) { + if (!rsp->count--) { get_random_bytes(&refresh, sizeof(refresh)); rsp->state += refresh; rsp->count = FAULT_RANDOM_REFRESH; diff --git a/drivers/block/drbd/drbd_proc.c b/drivers/block/drbd/drbd_proc.c index bdd0b4943b1..df8ad9660d8 100644 --- a/drivers/block/drbd/drbd_proc.c +++ b/drivers/block/drbd/drbd_proc.c @@ -38,7 +38,7 @@ static int drbd_proc_open(struct inode *inode, struct file *file); struct proc_dir_entry *drbd_proc; -struct file_operations drbd_proc_fops = { +const struct file_operations drbd_proc_fops = { .owner = THIS_MODULE, .open = drbd_proc_open, .read = seq_read, diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index c548f24f54a..259c1351b15 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -28,7 +28,6 @@ #include <asm/uaccess.h> #include <net/sock.h> -#include <linux/version.h> #include <linux/drbd.h> #include <linux/fs.h> #include <linux/file.h> diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index ed8796f1112..b453c2bca3b 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -24,7 +24,6 @@ */ #include <linux/module.h> -#include <linux/version.h> #include <linux/drbd.h> #include <linux/sched.h> #include <linux/smp_lock.h> @@ -34,7 +33,6 @@ #include <linux/mm_inline.h> #include <linux/slab.h> #include <linux/random.h> -#include <linux/mm.h> #include <linux/string.h> #include <linux/scatterlist.h> diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index e0339aaa181..02b2583df7f 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -860,7 +860,7 @@ static int mg_probe(struct platform_device *plat_dev) err = -EINVAL; goto probe_err_2; } - host->dev_base = ioremap(rsc->start , rsc->end + 1); + host->dev_base = ioremap(rsc->start, resource_size(rsc)); if (!host->dev_base) { printk(KERN_ERR "%s:%d ioremap fail\n", __func__, __LINE__); diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 2fb2e6cc322..5aa7a586a7f 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -725,9 +725,14 @@ static struct pci_driver agp_amd64_pci_driver = { int __init agp_amd64_init(void) { int err = 0; + static int done = 0; if (agp_off) return -EINVAL; + + if (done++) + return agp_bridges_found ? 0 : -ENODEV; + err = pci_register_driver(&agp_amd64_pci_driver); if (err < 0) return err; @@ -771,12 +776,8 @@ static void __exit agp_amd64_cleanup(void) pci_unregister_driver(&agp_amd64_pci_driver); } -/* On AMD64 the PCI driver needs to initialize this driver early - for the IOMMU, so it has to be called via a backdoor. */ -#ifndef CONFIG_GART_IOMMU module_init(agp_amd64_init); module_exit(agp_amd64_cleanup); -#endif MODULE_AUTHOR("Dave Jones <davej@redhat.com>, Andi Kleen"); module_param(agp_try_unsupported, bool, 0); diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c index e989f67bb61..3d9c61e5acb 100644 --- a/drivers/char/hw_random/core.c +++ b/drivers/char/hw_random/core.c @@ -158,10 +158,11 @@ static ssize_t rng_dev_read(struct file *filp, char __user *buf, goto out; } } -out_unlock: - mutex_unlock(&rng_mutex); out: return ret ? : err; +out_unlock: + mutex_unlock(&rng_mutex); + goto out; } diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 679cd08b80b..176f1751237 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -3204,7 +3204,7 @@ static __devinit int init_ipmi_si(void) #ifdef CONFIG_ACPI spmi_find_bmc(); #endif -#ifdef CONFIG_PNP +#ifdef CONFIG_ACPI pnp_register_driver(&ipmi_pnp_driver); #endif @@ -3330,7 +3330,7 @@ static __exit void cleanup_ipmi_si(void) #ifdef CONFIG_PCI pci_unregister_driver(&ipmi_pci_driver); #endif -#ifdef CONFIG_PNP +#ifdef CONFIG_ACPI pnp_unregister_driver(&ipmi_pnp_driver); #endif diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index 8c7df5ba088..f80810901db 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -27,6 +27,7 @@ #include <linux/init.h> #include <linux/smp_lock.h> #include <linux/mutex.h> +#include <linux/jiffies.h> #include <asm/hardware/dec21285.h> #include <asm/io.h> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index f15112569c1..efc1a61ca23 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -815,7 +815,7 @@ atc_is_tx_complete(struct dma_chan *chan, dev_vdbg(chan2dev(chan), "is_tx_complete: %d (d%d, u%d)\n", cookie, done ? *done : 0, used ? *used : 0); - spin_lock_bh(atchan->lock); + spin_lock_bh(&atchan->lock); last_complete = atchan->completed_cookie; last_used = chan->cookie; @@ -830,7 +830,7 @@ atc_is_tx_complete(struct dma_chan *chan, ret = dma_async_is_complete(cookie, last_complete, last_used); } - spin_unlock_bh(atchan->lock); + spin_unlock_bh(&atchan->lock); if (done) *done = last_complete; diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index 4a99cd94536..b5f2ee0f8e2 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -1294,8 +1294,8 @@ static int __exit coh901318_remove(struct platform_device *pdev) dma_async_device_unregister(&base->dma_slave); coh901318_pool_destroy(&base->pool); free_irq(platform_get_irq(pdev, 0), base); - kfree(base); iounmap(base->virtbase); + kfree(base); release_mem_region(pdev->resource->start, resource_size(pdev->resource)); return 0; diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 285bed0fe17..d28369f7afd 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -1270,8 +1270,6 @@ static int __init dw_probe(struct platform_device *pdev) goto err_kfree; } - memset(dw, 0, sizeof *dw); - dw->regs = ioremap(io->start, DW_REGLEN); if (!dw->regs) { err = -ENOMEM; diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index c524d36d3c2..dcc4ab78b32 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -1032,7 +1032,7 @@ int __devinit ioat_probe(struct ioatdma_device *device) dma->dev = &pdev->dev; if (!dma->chancnt) { - dev_err(dev, "zero channels detected\n"); + dev_err(dev, "channel enumeration error\n"); goto err_setup_interrupts; } diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index 45edde99648..bbc3e78ef33 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -60,6 +60,7 @@ * @dca: direct cache access context * @intr_quirk: interrupt setup quirk (for ioat_v1 devices) * @enumerate_channels: hw version specific channel enumeration + * @reset_hw: hw version specific channel (re)initialization * @cleanup_tasklet: select between the v2 and v3 cleanup routines * @timer_fn: select between the v2 and v3 timer watchdog routines * @self_test: hardware version specific self test for each supported op type @@ -78,6 +79,7 @@ struct ioatdma_device { struct dca_provider *dca; void (*intr_quirk)(struct ioatdma_device *device); int (*enumerate_channels)(struct ioatdma_device *device); + int (*reset_hw)(struct ioat_chan_common *chan); void (*cleanup_tasklet)(unsigned long data); void (*timer_fn)(unsigned long data); int (*self_test)(struct ioatdma_device *device); @@ -264,6 +266,22 @@ static inline void ioat_suspend(struct ioat_chan_common *chan) writeb(IOAT_CHANCMD_SUSPEND, chan->reg_base + IOAT_CHANCMD_OFFSET(ver)); } +static inline void ioat_reset(struct ioat_chan_common *chan) +{ + u8 ver = chan->device->version; + + writeb(IOAT_CHANCMD_RESET, chan->reg_base + IOAT_CHANCMD_OFFSET(ver)); +} + +static inline bool ioat_reset_pending(struct ioat_chan_common *chan) +{ + u8 ver = chan->device->version; + u8 cmd; + + cmd = readb(chan->reg_base + IOAT_CHANCMD_OFFSET(ver)); + return (cmd & IOAT_CHANCMD_RESET) == IOAT_CHANCMD_RESET; +} + static inline void ioat_set_chainaddr(struct ioat_dma_chan *ioat, u64 addr) { struct ioat_chan_common *chan = &ioat->base; diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index 8f1f7f05dea..5f7a500e18d 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -239,20 +239,50 @@ void __ioat2_restart_chan(struct ioat2_dma_chan *ioat) __ioat2_start_null_desc(ioat); } -static void ioat2_restart_channel(struct ioat2_dma_chan *ioat) +int ioat2_quiesce(struct ioat_chan_common *chan, unsigned long tmo) { - struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + unsigned long end = jiffies + tmo; + int err = 0; u32 status; status = ioat_chansts(chan); if (is_ioat_active(status) || is_ioat_idle(status)) ioat_suspend(chan); while (is_ioat_active(status) || is_ioat_idle(status)) { + if (end && time_after(jiffies, end)) { + err = -ETIMEDOUT; + break; + } status = ioat_chansts(chan); cpu_relax(); } + return err; +} + +int ioat2_reset_sync(struct ioat_chan_common *chan, unsigned long tmo) +{ + unsigned long end = jiffies + tmo; + int err = 0; + + ioat_reset(chan); + while (ioat_reset_pending(chan)) { + if (end && time_after(jiffies, end)) { + err = -ETIMEDOUT; + break; + } + cpu_relax(); + } + + return err; +} + +static void ioat2_restart_channel(struct ioat2_dma_chan *ioat) +{ + struct ioat_chan_common *chan = &ioat->base; + unsigned long phys_complete; + + ioat2_quiesce(chan, 0); if (ioat_cleanup_preamble(chan, &phys_complete)) __cleanup(ioat, phys_complete); @@ -318,6 +348,19 @@ void ioat2_timer_event(unsigned long data) spin_unlock_bh(&chan->cleanup_lock); } +static int ioat2_reset_hw(struct ioat_chan_common *chan) +{ + /* throw away whatever the channel was doing and get it initialized */ + u32 chanerr; + + ioat2_quiesce(chan, msecs_to_jiffies(100)); + + chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); + + return ioat2_reset_sync(chan, msecs_to_jiffies(200)); +} + /** * ioat2_enumerate_channels - find and initialize the device's channels * @device: the device to be enumerated @@ -360,6 +403,10 @@ int ioat2_enumerate_channels(struct ioatdma_device *device) (unsigned long) ioat); ioat->xfercap_log = xfercap_log; spin_lock_init(&ioat->ring_lock); + if (device->reset_hw(&ioat->base)) { + i = 0; + break; + } } dma->chancnt = i; return i; @@ -467,7 +514,6 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) struct ioat2_dma_chan *ioat = to_ioat2_chan(c); struct ioat_chan_common *chan = &ioat->base; struct ioat_ring_ent **ring; - u32 chanerr; int order; /* have we already been set up? */ @@ -477,12 +523,6 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) /* Setup register to interrupt and write completion status on error */ writew(IOAT_CHANCTRL_RUN, chan->reg_base + IOAT_CHANCTRL_OFFSET); - chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); - if (chanerr) { - dev_err(to_dev(chan), "CHANERR = %x, clearing\n", chanerr); - writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); - } - /* allocate a completion writeback area */ /* doing 2 32bit writes to mmio since 1 64b write doesn't work */ chan->completion = pci_pool_alloc(chan->device->completion_pool, @@ -746,13 +786,7 @@ void ioat2_free_chan_resources(struct dma_chan *c) tasklet_disable(&chan->cleanup_task); del_timer_sync(&chan->timer); device->cleanup_tasklet((unsigned long) ioat); - - /* Delay 100ms after reset to allow internal DMA logic to quiesce - * before removing DMA descriptor resources. - */ - writeb(IOAT_CHANCMD_RESET, - chan->reg_base + IOAT_CHANCMD_OFFSET(chan->device->version)); - mdelay(100); + device->reset_hw(chan); spin_lock_bh(&ioat->ring_lock); descs = ioat2_ring_space(ioat); @@ -839,6 +873,7 @@ int __devinit ioat2_dma_probe(struct ioatdma_device *device, int dca) int err; device->enumerate_channels = ioat2_enumerate_channels; + device->reset_hw = ioat2_reset_hw; device->cleanup_tasklet = ioat2_cleanup_tasklet; device->timer_fn = ioat2_timer_event; device->self_test = ioat_dma_self_test; diff --git a/drivers/dma/ioat/dma_v2.h b/drivers/dma/ioat/dma_v2.h index 1d849ef74d5..3afad8da43c 100644 --- a/drivers/dma/ioat/dma_v2.h +++ b/drivers/dma/ioat/dma_v2.h @@ -185,6 +185,8 @@ bool reshape_ring(struct ioat2_dma_chan *ioat, int order); void __ioat2_issue_pending(struct ioat2_dma_chan *ioat); void ioat2_cleanup_tasklet(unsigned long data); void ioat2_timer_event(unsigned long data); +int ioat2_quiesce(struct ioat_chan_common *chan, unsigned long tmo); +int ioat2_reset_sync(struct ioat_chan_common *chan, unsigned long tmo); extern struct kobj_type ioat2_ktype; extern struct kmem_cache *ioat2_cache; #endif /* IOATDMA_V2_H */ diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 42f6f10fb0c..9908c9e94b2 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -650,9 +650,11 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, num_descs = ioat2_xferlen_to_descs(ioat, len); /* we need 2x the number of descriptors to cover greater than 3 - * sources + * sources (we need 1 extra source in the q-only continuation + * case and 3 extra sources in the p+q continuation case. */ - if (src_cnt > 3 || flags & DMA_PREP_CONTINUE) { + if (src_cnt + dmaf_p_disabled_continue(flags) > 3 || + (dmaf_continue(flags) && !dmaf_p_disabled_continue(flags))) { with_ext = 1; num_descs *= 2; } else @@ -1128,6 +1130,45 @@ static int __devinit ioat3_dma_self_test(struct ioatdma_device *device) return 0; } +static int ioat3_reset_hw(struct ioat_chan_common *chan) +{ + /* throw away whatever the channel was doing and get it + * initialized, with ioat3 specific workarounds + */ + struct ioatdma_device *device = chan->device; + struct pci_dev *pdev = device->pdev; + u32 chanerr; + u16 dev_id; + int err; + + ioat2_quiesce(chan, msecs_to_jiffies(100)); + + chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); + + /* -= IOAT ver.3 workarounds =- */ + /* Write CHANERRMSK_INT with 3E07h to mask out the errors + * that can cause stability issues for IOAT ver.3, and clear any + * pending errors + */ + pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07); + err = pci_read_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, &chanerr); + if (err) { + dev_err(&pdev->dev, "channel error register unreachable\n"); + return err; + } + pci_write_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, chanerr); + + /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit + * (workaround for spurious config parity error after restart) + */ + pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id); + if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) + pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10); + + return ioat2_reset_sync(chan, msecs_to_jiffies(200)); +} + int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) { struct pci_dev *pdev = device->pdev; @@ -1137,10 +1178,10 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) struct ioat_chan_common *chan; bool is_raid_device = false; int err; - u16 dev_id; u32 cap; device->enumerate_channels = ioat2_enumerate_channels; + device->reset_hw = ioat3_reset_hw; device->self_test = ioat3_dma_self_test; dma = &device->common; dma->device_prep_dma_memcpy = ioat2_dma_prep_memcpy_lock; @@ -1216,19 +1257,6 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) dma->device_prep_dma_xor_val = NULL; #endif - /* -= IOAT ver.3 workarounds =- */ - /* Write CHANERRMSK_INT with 3E07h to mask out the errors - * that can cause stability issues for IOAT ver.3 - */ - pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07); - - /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit - * (workaround for spurious config parity error after restart) - */ - pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id); - if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) - pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10); - err = ioat_probe(device); if (err) return err; diff --git a/drivers/dma/ioat/registers.h b/drivers/dma/ioat/registers.h index f015ec19670..e8ae63baf58 100644 --- a/drivers/dma/ioat/registers.h +++ b/drivers/dma/ioat/registers.h @@ -27,6 +27,7 @@ #define IOAT_PCI_DEVICE_ID_OFFSET 0x02 #define IOAT_PCI_DMAUNCERRSTS_OFFSET 0x148 +#define IOAT_PCI_CHANERR_INT_OFFSET 0x180 #define IOAT_PCI_CHANERRMASK_INT_OFFSET 0x184 /* MMIO Device Registers */ diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 2e4a54c8afe..d10cc899c46 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -23,16 +23,19 @@ #include <linux/dmaengine.h> #include <linux/delay.h> #include <linux/dma-mapping.h> -#include <linux/dmapool.h> #include <linux/platform_device.h> #include <cpu/dma.h> #include <asm/dma-sh.h> #include "shdma.h" /* DMA descriptor control */ -#define DESC_LAST (-1) -#define DESC_COMP (1) -#define DESC_NCOMP (0) +enum sh_dmae_desc_status { + DESC_IDLE, + DESC_PREPARED, + DESC_SUBMITTED, + DESC_COMPLETED, /* completed, have to call callback */ + DESC_WAITING, /* callback called, waiting for ack / re-submit */ +}; #define NR_DESCS_PER_CHANNEL 32 /* @@ -45,6 +48,8 @@ */ #define RS_DEFAULT (RS_DUAL) +static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan, bool all); + #define SH_DMAC_CHAN_BASE(id) (dma_base_addr[id]) static void sh_dmae_writel(struct sh_dmae_chan *sh_dc, u32 data, u32 reg) { @@ -106,11 +111,11 @@ static inline unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan) return ts_shift[(chcr & CHCR_TS_MASK) >> CHCR_TS_SHIFT]; } -static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs hw) +static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs *hw) { - sh_dmae_writel(sh_chan, hw.sar, SAR); - sh_dmae_writel(sh_chan, hw.dar, DAR); - sh_dmae_writel(sh_chan, hw.tcr >> calc_xmit_shift(sh_chan), TCR); + sh_dmae_writel(sh_chan, hw->sar, SAR); + sh_dmae_writel(sh_chan, hw->dar, DAR); + sh_dmae_writel(sh_chan, hw->tcr >> calc_xmit_shift(sh_chan), TCR); } static void dmae_start(struct sh_dmae_chan *sh_chan) @@ -184,8 +189,9 @@ static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val) static dma_cookie_t sh_dmae_tx_submit(struct dma_async_tx_descriptor *tx) { - struct sh_desc *desc = tx_to_sh_desc(tx); + struct sh_desc *desc = tx_to_sh_desc(tx), *chunk, *last = desc, *c; struct sh_dmae_chan *sh_chan = to_sh_chan(tx->chan); + dma_async_tx_callback callback = tx->callback; dma_cookie_t cookie; spin_lock_bh(&sh_chan->desc_lock); @@ -195,45 +201,53 @@ static dma_cookie_t sh_dmae_tx_submit(struct dma_async_tx_descriptor *tx) if (cookie < 0) cookie = 1; - /* If desc only in the case of 1 */ - if (desc->async_tx.cookie != -EBUSY) - desc->async_tx.cookie = cookie; - sh_chan->common.cookie = desc->async_tx.cookie; + sh_chan->common.cookie = cookie; + tx->cookie = cookie; + + /* Mark all chunks of this descriptor as submitted, move to the queue */ + list_for_each_entry_safe(chunk, c, desc->node.prev, node) { + /* + * All chunks are on the global ld_free, so, we have to find + * the end of the chain ourselves + */ + if (chunk != desc && (chunk->mark == DESC_IDLE || + chunk->async_tx.cookie > 0 || + chunk->async_tx.cookie == -EBUSY || + &chunk->node == &sh_chan->ld_free)) + break; + chunk->mark = DESC_SUBMITTED; + /* Callback goes to the last chunk */ + chunk->async_tx.callback = NULL; + chunk->cookie = cookie; + list_move_tail(&chunk->node, &sh_chan->ld_queue); + last = chunk; + } + + last->async_tx.callback = callback; + last->async_tx.callback_param = tx->callback_param; - list_splice_init(&desc->tx_list, sh_chan->ld_queue.prev); + dev_dbg(sh_chan->dev, "submit #%d@%p on %d: %x[%d] -> %x\n", + tx->cookie, &last->async_tx, sh_chan->id, + desc->hw.sar, desc->hw.tcr, desc->hw.dar); spin_unlock_bh(&sh_chan->desc_lock); return cookie; } +/* Called with desc_lock held */ static struct sh_desc *sh_dmae_get_desc(struct sh_dmae_chan *sh_chan) { - struct sh_desc *desc, *_desc, *ret = NULL; + struct sh_desc *desc; - spin_lock_bh(&sh_chan->desc_lock); - list_for_each_entry_safe(desc, _desc, &sh_chan->ld_free, node) { - if (async_tx_test_ack(&desc->async_tx)) { + list_for_each_entry(desc, &sh_chan->ld_free, node) + if (desc->mark != DESC_PREPARED) { + BUG_ON(desc->mark != DESC_IDLE); list_del(&desc->node); - ret = desc; - break; + return desc; } - } - spin_unlock_bh(&sh_chan->desc_lock); - - return ret; -} - -static void sh_dmae_put_desc(struct sh_dmae_chan *sh_chan, struct sh_desc *desc) -{ - if (desc) { - spin_lock_bh(&sh_chan->desc_lock); - - list_splice_init(&desc->tx_list, &sh_chan->ld_free); - list_add(&desc->node, &sh_chan->ld_free); - spin_unlock_bh(&sh_chan->desc_lock); - } + return NULL; } static int sh_dmae_alloc_chan_resources(struct dma_chan *chan) @@ -252,11 +266,10 @@ static int sh_dmae_alloc_chan_resources(struct dma_chan *chan) dma_async_tx_descriptor_init(&desc->async_tx, &sh_chan->common); desc->async_tx.tx_submit = sh_dmae_tx_submit; - desc->async_tx.flags = DMA_CTRL_ACK; - INIT_LIST_HEAD(&desc->tx_list); - sh_dmae_put_desc(sh_chan, desc); + desc->mark = DESC_IDLE; spin_lock_bh(&sh_chan->desc_lock); + list_add(&desc->node, &sh_chan->ld_free); sh_chan->descs_allocated++; } spin_unlock_bh(&sh_chan->desc_lock); @@ -273,7 +286,10 @@ static void sh_dmae_free_chan_resources(struct dma_chan *chan) struct sh_desc *desc, *_desc; LIST_HEAD(list); - BUG_ON(!list_empty(&sh_chan->ld_queue)); + /* Prepared and not submitted descriptors can still be on the queue */ + if (!list_empty(&sh_chan->ld_queue)) + sh_dmae_chan_ld_cleanup(sh_chan, true); + spin_lock_bh(&sh_chan->desc_lock); list_splice_init(&sh_chan->ld_free, &list); @@ -292,6 +308,8 @@ static struct dma_async_tx_descriptor *sh_dmae_prep_memcpy( struct sh_dmae_chan *sh_chan; struct sh_desc *first = NULL, *prev = NULL, *new; size_t copy_size; + LIST_HEAD(tx_list); + int chunks = (len + SH_DMA_TCR_MAX) / (SH_DMA_TCR_MAX + 1); if (!chan) return NULL; @@ -301,108 +319,189 @@ static struct dma_async_tx_descriptor *sh_dmae_prep_memcpy( sh_chan = to_sh_chan(chan); + /* Have to lock the whole loop to protect against concurrent release */ + spin_lock_bh(&sh_chan->desc_lock); + + /* + * Chaining: + * first descriptor is what user is dealing with in all API calls, its + * cookie is at first set to -EBUSY, at tx-submit to a positive + * number + * if more than one chunk is needed further chunks have cookie = -EINVAL + * the last chunk, if not equal to the first, has cookie = -ENOSPC + * all chunks are linked onto the tx_list head with their .node heads + * only during this function, then they are immediately spliced + * back onto the free list in form of a chain + */ do { - /* Allocate the link descriptor from DMA pool */ + /* Allocate the link descriptor from the free list */ new = sh_dmae_get_desc(sh_chan); if (!new) { dev_err(sh_chan->dev, "No free memory for link descriptor\n"); - goto err_get_desc; + list_for_each_entry(new, &tx_list, node) + new->mark = DESC_IDLE; + list_splice(&tx_list, &sh_chan->ld_free); + spin_unlock_bh(&sh_chan->desc_lock); + return NULL; } - copy_size = min(len, (size_t)SH_DMA_TCR_MAX); + copy_size = min(len, (size_t)SH_DMA_TCR_MAX + 1); new->hw.sar = dma_src; new->hw.dar = dma_dest; new->hw.tcr = copy_size; - if (!first) + if (!first) { + /* First desc */ + new->async_tx.cookie = -EBUSY; first = new; + } else { + /* Other desc - invisible to the user */ + new->async_tx.cookie = -EINVAL; + } - new->mark = DESC_NCOMP; - async_tx_ack(&new->async_tx); + dev_dbg(sh_chan->dev, + "chaining %u of %u with %p, dst %x, cookie %d\n", + copy_size, len, &new->async_tx, dma_dest, + new->async_tx.cookie); + + new->mark = DESC_PREPARED; + new->async_tx.flags = flags; + new->chunks = chunks--; prev = new; len -= copy_size; dma_src += copy_size; dma_dest += copy_size; /* Insert the link descriptor to the LD ring */ - list_add_tail(&new->node, &first->tx_list); + list_add_tail(&new->node, &tx_list); } while (len); - new->async_tx.flags = flags; /* client is in control of this ack */ - new->async_tx.cookie = -EBUSY; /* Last desc */ + if (new != first) + new->async_tx.cookie = -ENOSPC; - return &first->async_tx; + /* Put them back on the free list, so, they don't get lost */ + list_splice_tail(&tx_list, &sh_chan->ld_free); -err_get_desc: - sh_dmae_put_desc(sh_chan, first); - return NULL; + spin_unlock_bh(&sh_chan->desc_lock); + return &first->async_tx; } -/* - * sh_chan_ld_cleanup - Clean up link descriptors - * - * This function clean up the ld_queue of DMA channel. - */ -static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan) +static dma_async_tx_callback __ld_cleanup(struct sh_dmae_chan *sh_chan, bool all) { struct sh_desc *desc, *_desc; + /* Is the "exposed" head of a chain acked? */ + bool head_acked = false; + dma_cookie_t cookie = 0; + dma_async_tx_callback callback = NULL; + void *param = NULL; spin_lock_bh(&sh_chan->desc_lock); list_for_each_entry_safe(desc, _desc, &sh_chan->ld_queue, node) { - dma_async_tx_callback callback; - void *callback_param; - - /* non send data */ - if (desc->mark == DESC_NCOMP) + struct dma_async_tx_descriptor *tx = &desc->async_tx; + + BUG_ON(tx->cookie > 0 && tx->cookie != desc->cookie); + BUG_ON(desc->mark != DESC_SUBMITTED && + desc->mark != DESC_COMPLETED && + desc->mark != DESC_WAITING); + + /* + * queue is ordered, and we use this loop to (1) clean up all + * completed descriptors, and to (2) update descriptor flags of + * any chunks in a (partially) completed chain + */ + if (!all && desc->mark == DESC_SUBMITTED && + desc->cookie != cookie) break; - /* send data sesc */ - callback = desc->async_tx.callback; - callback_param = desc->async_tx.callback_param; + if (tx->cookie > 0) + cookie = tx->cookie; - /* Remove from ld_queue list */ - list_splice_init(&desc->tx_list, &sh_chan->ld_free); + if (desc->mark == DESC_COMPLETED && desc->chunks == 1) { + BUG_ON(sh_chan->completed_cookie != desc->cookie - 1); + sh_chan->completed_cookie = desc->cookie; + } - dev_dbg(sh_chan->dev, "link descriptor %p will be recycle.\n", - desc); + /* Call callback on the last chunk */ + if (desc->mark == DESC_COMPLETED && tx->callback) { + desc->mark = DESC_WAITING; + callback = tx->callback; + param = tx->callback_param; + dev_dbg(sh_chan->dev, "descriptor #%d@%p on %d callback\n", + tx->cookie, tx, sh_chan->id); + BUG_ON(desc->chunks != 1); + break; + } - list_move(&desc->node, &sh_chan->ld_free); - /* Run the link descriptor callback function */ - if (callback) { - spin_unlock_bh(&sh_chan->desc_lock); - dev_dbg(sh_chan->dev, "link descriptor %p callback\n", - desc); - callback(callback_param); - spin_lock_bh(&sh_chan->desc_lock); + if (tx->cookie > 0 || tx->cookie == -EBUSY) { + if (desc->mark == DESC_COMPLETED) { + BUG_ON(tx->cookie < 0); + desc->mark = DESC_WAITING; + } + head_acked = async_tx_test_ack(tx); + } else { + switch (desc->mark) { + case DESC_COMPLETED: + desc->mark = DESC_WAITING; + /* Fall through */ + case DESC_WAITING: + if (head_acked) + async_tx_ack(&desc->async_tx); + } + } + + dev_dbg(sh_chan->dev, "descriptor %p #%d completed.\n", + tx, tx->cookie); + + if (((desc->mark == DESC_COMPLETED || + desc->mark == DESC_WAITING) && + async_tx_test_ack(&desc->async_tx)) || all) { + /* Remove from ld_queue list */ + desc->mark = DESC_IDLE; + list_move(&desc->node, &sh_chan->ld_free); } } spin_unlock_bh(&sh_chan->desc_lock); + + if (callback) + callback(param); + + return callback; +} + +/* + * sh_chan_ld_cleanup - Clean up link descriptors + * + * This function cleans up the ld_queue of DMA channel. + */ +static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan, bool all) +{ + while (__ld_cleanup(sh_chan, all)) + ; } static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan) { - struct list_head *ld_node; - struct sh_dmae_regs hw; + struct sh_desc *sd; + spin_lock_bh(&sh_chan->desc_lock); /* DMA work check */ - if (dmae_is_busy(sh_chan)) + if (dmae_is_busy(sh_chan)) { + spin_unlock_bh(&sh_chan->desc_lock); return; + } /* Find the first un-transfer desciptor */ - for (ld_node = sh_chan->ld_queue.next; - (ld_node != &sh_chan->ld_queue) - && (to_sh_desc(ld_node)->mark == DESC_COMP); - ld_node = ld_node->next) - cpu_relax(); - - if (ld_node != &sh_chan->ld_queue) { - /* Get the ld start address from ld_queue */ - hw = to_sh_desc(ld_node)->hw; - dmae_set_reg(sh_chan, hw); - dmae_start(sh_chan); - } + list_for_each_entry(sd, &sh_chan->ld_queue, node) + if (sd->mark == DESC_SUBMITTED) { + /* Get the ld start address from ld_queue */ + dmae_set_reg(sh_chan, &sd->hw); + dmae_start(sh_chan); + break; + } + + spin_unlock_bh(&sh_chan->desc_lock); } static void sh_dmae_memcpy_issue_pending(struct dma_chan *chan) @@ -420,12 +519,11 @@ static enum dma_status sh_dmae_is_complete(struct dma_chan *chan, dma_cookie_t last_used; dma_cookie_t last_complete; - sh_dmae_chan_ld_cleanup(sh_chan); + sh_dmae_chan_ld_cleanup(sh_chan, false); last_used = chan->cookie; last_complete = sh_chan->completed_cookie; - if (last_complete == -EBUSY) - last_complete = last_used; + BUG_ON(last_complete < 0); if (done) *done = last_complete; @@ -480,11 +578,13 @@ static irqreturn_t sh_dmae_err(int irq, void *data) err = sh_dmae_rst(0); if (err) return err; +#ifdef SH_DMAC_BASE1 if (shdev->pdata.mode & SHDMA_DMAOR1) { err = sh_dmae_rst(1); if (err) return err; } +#endif disable_irq(irq); return IRQ_HANDLED; } @@ -494,35 +594,25 @@ static irqreturn_t sh_dmae_err(int irq, void *data) static void dmae_do_tasklet(unsigned long data) { struct sh_dmae_chan *sh_chan = (struct sh_dmae_chan *)data; - struct sh_desc *desc, *_desc, *cur_desc = NULL; + struct sh_desc *desc; u32 sar_buf = sh_dmae_readl(sh_chan, SAR); - list_for_each_entry_safe(desc, _desc, - &sh_chan->ld_queue, node) { - if ((desc->hw.sar + desc->hw.tcr) == sar_buf) { - cur_desc = desc; + spin_lock(&sh_chan->desc_lock); + list_for_each_entry(desc, &sh_chan->ld_queue, node) { + if ((desc->hw.sar + desc->hw.tcr) == sar_buf && + desc->mark == DESC_SUBMITTED) { + dev_dbg(sh_chan->dev, "done #%d@%p dst %u\n", + desc->async_tx.cookie, &desc->async_tx, + desc->hw.dar); + desc->mark = DESC_COMPLETED; break; } } + spin_unlock(&sh_chan->desc_lock); - if (cur_desc) { - switch (cur_desc->async_tx.cookie) { - case 0: /* other desc data */ - break; - case -EBUSY: /* last desc */ - sh_chan->completed_cookie = - cur_desc->async_tx.cookie; - break; - default: /* first desc ( 0 < )*/ - sh_chan->completed_cookie = - cur_desc->async_tx.cookie - 1; - break; - } - cur_desc->mark = DESC_COMP; - } /* Next desc */ sh_chan_xfer_ld_queue(sh_chan); - sh_dmae_chan_ld_cleanup(sh_chan); + sh_dmae_chan_ld_cleanup(sh_chan, false); } static unsigned int get_dmae_irq(unsigned int id) diff --git a/drivers/dma/shdma.h b/drivers/dma/shdma.h index 60b81e529b4..108f1cffb6f 100644 --- a/drivers/dma/shdma.h +++ b/drivers/dma/shdma.h @@ -13,9 +13,9 @@ #ifndef __DMA_SHDMA_H #define __DMA_SHDMA_H -#include <linux/device.h> -#include <linux/dmapool.h> #include <linux/dmaengine.h> +#include <linux/interrupt.h> +#include <linux/list.h> #define SH_DMA_TCR_MAX 0x00FFFFFF /* 16MB */ @@ -26,13 +26,16 @@ struct sh_dmae_regs { }; struct sh_desc { - struct list_head tx_list; struct sh_dmae_regs hw; struct list_head node; struct dma_async_tx_descriptor async_tx; + dma_cookie_t cookie; + int chunks; int mark; }; +struct device; + struct sh_dmae_chan { dma_cookie_t completed_cookie; /* The maximum cookie completed */ spinlock_t desc_lock; /* Descriptor operation lock */ diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index df5b68433f3..c5facd951dd 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1700,11 +1700,14 @@ static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci, */ static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt) { - int dimm, size0, size1; + int dimm, size0, size1, factor = 0; u32 dbam; u32 *dcsb; if (boot_cpu_data.x86 == 0xf) { + if (pvt->dclr0 & F10_WIDTH_128) + factor = 1; + /* K8 families < revF not supported yet */ if (pvt->ext_model < K8_REV_F) return; @@ -1732,7 +1735,8 @@ static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt) size1 = pvt->ops->dbam_to_cs(pvt, DBAM_DIMM(dimm, dbam)); edac_printk(KERN_DEBUG, EDAC_MC, " %d: %5dMB %d: %5dMB\n", - dimm * 2, size0, dimm * 2 + 1, size1); + dimm * 2, size0 << factor, + dimm * 2 + 1, size1 << factor); } } @@ -2345,7 +2349,7 @@ static void amd64_read_mc_registers(struct amd64_pvt *pvt) amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0); amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_0, &pvt->dchr0); - if (!dct_ganging_enabled(pvt)) { + if (!dct_ganging_enabled(pvt) && boot_cpu_data.x86 >= 0x10) { amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1); amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_1, &pvt->dchr1); } @@ -2686,9 +2690,8 @@ static int amd64_check_ecc_enabled(struct amd64_pvt *pvt) amd64_printk(KERN_WARNING, "%s", ecc_warning); return -ENODEV; } - } else - /* CLEAR the override, since BIOS controlled it */ ecc_enable_override = 0; + } return 0; } @@ -2925,16 +2928,15 @@ static void __devexit amd64_remove_one_instance(struct pci_dev *pdev) amd64_free_mc_sibling_devices(pvt); - kfree(pvt); - mci->pvt_info = NULL; - - mci_lookup[pvt->mc_node_id] = NULL; - /* unregister from EDAC MCE */ amd_report_gart_errors(false); amd_unregister_ecc_decoder(amd64_decode_bus_error); /* Free the EDAC CORE resources */ + mci->pvt_info = NULL; + mci_lookup[pvt->mc_node_id] = NULL; + + kfree(pvt); edac_mc_free(mci); } @@ -3011,25 +3013,29 @@ static void amd64_setup_pci_device(void) static int __init amd64_edac_init(void) { int nb, err = -ENODEV; + bool load_ok = false; edac_printk(KERN_INFO, EDAC_MOD_STR, EDAC_AMD64_VERSION "\n"); opstate_init(); if (cache_k8_northbridges() < 0) - return err; + goto err_ret; msrs = msrs_alloc(); + if (!msrs) + goto err_ret; err = pci_register_driver(&amd64_pci_driver); if (err) - return err; + goto err_pci; /* * At this point, the array 'pvt_lookup[]' contains pointers to alloc'd * amd64_pvt structs. These will be used in the 2nd stage init function * to finish initialization of the MC instances. */ + err = -ENODEV; for (nb = 0; nb < num_k8_northbridges; nb++) { if (!pvt_lookup[nb]) continue; @@ -3037,16 +3043,21 @@ static int __init amd64_edac_init(void) err = amd64_init_2nd_stage(pvt_lookup[nb]); if (err) goto err_2nd_stage; - } - amd64_setup_pci_device(); + load_ok = true; + } - return 0; + if (load_ok) { + amd64_setup_pci_device(); + return 0; + } err_2nd_stage: - debugf0("2nd stage failed\n"); pci_unregister_driver(&amd64_pci_driver); - +err_pci: + msrs_free(msrs); + msrs = NULL; +err_ret: return err; } diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c index 422728cfe99..fb60a877d76 100644 --- a/drivers/edac/edac_pci_sysfs.c +++ b/drivers/edac/edac_pci_sysfs.c @@ -534,8 +534,6 @@ static void edac_pci_dev_parity_clear(struct pci_dev *dev) { u8 header_type; - debugf0("%s()\n", __func__); - get_pci_parity_status(dev, 0); /* read the device TYPE, looking for bridges */ diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index 13efcd36207..a9371b36a9b 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -1,5 +1,10 @@ +menu "IEEE 1394 (FireWire) support" + depends on PCI || BROKEN + # firewire-core does not depend on PCI but is + # not useful without PCI controller driver + comment "You can enable one or both FireWire driver stacks." -comment "See the help texts for more information." +comment "The newer stack is recommended." config FIREWIRE tristate "FireWire driver stack" @@ -15,16 +20,6 @@ config FIREWIRE To compile this driver as a module, say M here: the module will be called firewire-core. - This module functionally replaces ieee1394, raw1394, and video1394. - To access it from application programs, you generally need at least - libraw1394 v2. IIDC/DCAM applications need libdc1394 v2. - No libraries are required to access storage devices through the - firewire-sbp2 driver. - - NOTE: - FireWire audio devices currently require the old drivers (ieee1394, - ohci1394, raw1394). - config FIREWIRE_OHCI tristate "OHCI-1394 controllers" depends on PCI && FIREWIRE @@ -34,22 +29,7 @@ config FIREWIRE_OHCI is the only chipset in use, so say Y here. To compile this driver as a module, say M here: The module will be - called firewire-ohci. It replaces ohci1394 of the classic IEEE 1394 - stack. - - NOTE: - If you want to install firewire-ohci and ohci1394 together, you - should configure them only as modules and blacklist the driver(s) - which you don't want to have auto-loaded. Add either - - blacklist firewire-ohci - or - blacklist ohci1394 - blacklist video1394 - blacklist dv1394 - - to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf - depending on your distribution. + called firewire-ohci. config FIREWIRE_OHCI_DEBUG bool @@ -66,8 +46,7 @@ config FIREWIRE_SBP2 like scanners. To compile this driver as a module, say M here: The module will be - called firewire-sbp2. It replaces sbp2 of the classic IEEE 1394 - stack. + called firewire-sbp2. You should also enable support for disks, CD-ROMs, etc. in the SCSI configuration section. @@ -83,5 +62,8 @@ config FIREWIRE_NET NOTE, this driver is not stable yet! To compile this driver as a module, say M here: The module will be - called firewire-net. It replaces eth1394 of the classic IEEE 1394 - stack. + called firewire-net. + +source "drivers/ieee1394/Kconfig" + +endmenu diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index 231e6ee5ba4..e6d63849e78 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -601,8 +601,9 @@ static void release_request(struct client *client, struct inbound_transaction_resource *r = container_of(resource, struct inbound_transaction_resource, resource); - fw_send_response(client->device->card, r->request, - RCODE_CONFLICT_ERROR); + if (r->request) + fw_send_response(client->device->card, r->request, + RCODE_CONFLICT_ERROR); kfree(r); } @@ -645,7 +646,8 @@ static void handle_request(struct fw_card *card, struct fw_request *request, failed: kfree(r); kfree(e); - fw_send_response(card, request, RCODE_CONFLICT_ERROR); + if (request) + fw_send_response(card, request, RCODE_CONFLICT_ERROR); } static void release_address_handler(struct client *client, @@ -715,15 +717,18 @@ static int ioctl_send_response(struct client *client, void *buffer) r = container_of(resource, struct inbound_transaction_resource, resource); - if (request->length < r->length) - r->length = request->length; - - if (copy_from_user(r->data, u64_to_uptr(request->data), r->length)) { - ret = -EFAULT; - goto out; + if (r->request) { + if (request->length < r->length) + r->length = request->length; + if (copy_from_user(r->data, u64_to_uptr(request->data), + r->length)) { + ret = -EFAULT; + kfree(r->request); + goto out; + } + fw_send_response(client->device->card, r->request, + request->rcode); } - - fw_send_response(client->device->card, r->request, request->rcode); out: kfree(r); diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index 842739df23e..495849eb13c 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -432,14 +432,20 @@ static struct fw_address_handler *lookup_overlapping_address_handler( return NULL; } +static bool is_enclosing_handler(struct fw_address_handler *handler, + unsigned long long offset, size_t length) +{ + return handler->offset <= offset && + offset + length <= handler->offset + handler->length; +} + static struct fw_address_handler *lookup_enclosing_address_handler( struct list_head *list, unsigned long long offset, size_t length) { struct fw_address_handler *handler; list_for_each_entry(handler, list, link) { - if (handler->offset <= offset && - offset + length <= handler->offset + handler->length) + if (is_enclosing_handler(handler, offset, length)) return handler; } @@ -465,6 +471,12 @@ const struct fw_address_region fw_unit_space_region = { .start = 0xfffff0000900ULL, .end = 0x1000000000000ULL, }; #endif /* 0 */ +static bool is_in_fcp_region(u64 offset, size_t length) +{ + return offset >= (CSR_REGISTER_BASE | CSR_FCP_COMMAND) && + offset + length <= (CSR_REGISTER_BASE | CSR_FCP_END); +} + /** * fw_core_add_address_handler - register for incoming requests * @handler: callback @@ -477,8 +489,11 @@ const struct fw_address_region fw_unit_space_region = * give the details of the particular request. * * Return value: 0 on success, non-zero otherwise. + * * The start offset of the handler's address region is determined by * fw_core_add_address_handler() and is returned in handler->offset. + * + * Address allocations are exclusive, except for the FCP registers. */ int fw_core_add_address_handler(struct fw_address_handler *handler, const struct fw_address_region *region) @@ -498,10 +513,12 @@ int fw_core_add_address_handler(struct fw_address_handler *handler, handler->offset = region->start; while (handler->offset + handler->length <= region->end) { - other = - lookup_overlapping_address_handler(&address_handler_list, - handler->offset, - handler->length); + if (is_in_fcp_region(handler->offset, handler->length)) + other = NULL; + else + other = lookup_overlapping_address_handler + (&address_handler_list, + handler->offset, handler->length); if (other != NULL) { handler->offset += other->length; } else { @@ -668,6 +685,9 @@ static struct fw_request *allocate_request(struct fw_packet *p) void fw_send_response(struct fw_card *card, struct fw_request *request, int rcode) { + if (WARN_ONCE(!request, "invalid for FCP address handlers")) + return; + /* unified transaction or broadcast transaction: don't respond */ if (request->ack != ACK_PENDING || HEADER_DESTINATION_IS_BROADCAST(request->request_header[0])) { @@ -686,26 +706,15 @@ void fw_send_response(struct fw_card *card, } EXPORT_SYMBOL(fw_send_response); -void fw_core_handle_request(struct fw_card *card, struct fw_packet *p) +static void handle_exclusive_region_request(struct fw_card *card, + struct fw_packet *p, + struct fw_request *request, + unsigned long long offset) { struct fw_address_handler *handler; - struct fw_request *request; - unsigned long long offset; unsigned long flags; int tcode, destination, source; - if (p->ack != ACK_PENDING && p->ack != ACK_COMPLETE) - return; - - request = allocate_request(p); - if (request == NULL) { - /* FIXME: send statically allocated busy packet. */ - return; - } - - offset = - ((unsigned long long) - HEADER_GET_OFFSET_HIGH(p->header[1]) << 32) | p->header[2]; tcode = HEADER_GET_TCODE(p->header[0]); destination = HEADER_GET_DESTINATION(p->header[0]); source = HEADER_GET_SOURCE(p->header[1]); @@ -732,6 +741,73 @@ void fw_core_handle_request(struct fw_card *card, struct fw_packet *p) request->data, request->length, handler->callback_data); } + +static void handle_fcp_region_request(struct fw_card *card, + struct fw_packet *p, + struct fw_request *request, + unsigned long long offset) +{ + struct fw_address_handler *handler; + unsigned long flags; + int tcode, destination, source; + + if ((offset != (CSR_REGISTER_BASE | CSR_FCP_COMMAND) && + offset != (CSR_REGISTER_BASE | CSR_FCP_RESPONSE)) || + request->length > 0x200) { + fw_send_response(card, request, RCODE_ADDRESS_ERROR); + + return; + } + + tcode = HEADER_GET_TCODE(p->header[0]); + destination = HEADER_GET_DESTINATION(p->header[0]); + source = HEADER_GET_SOURCE(p->header[1]); + + if (tcode != TCODE_WRITE_QUADLET_REQUEST && + tcode != TCODE_WRITE_BLOCK_REQUEST) { + fw_send_response(card, request, RCODE_TYPE_ERROR); + + return; + } + + spin_lock_irqsave(&address_handler_lock, flags); + list_for_each_entry(handler, &address_handler_list, link) { + if (is_enclosing_handler(handler, offset, request->length)) + handler->address_callback(card, NULL, tcode, + destination, source, + p->generation, p->speed, + offset, request->data, + request->length, + handler->callback_data); + } + spin_unlock_irqrestore(&address_handler_lock, flags); + + fw_send_response(card, request, RCODE_COMPLETE); +} + +void fw_core_handle_request(struct fw_card *card, struct fw_packet *p) +{ + struct fw_request *request; + unsigned long long offset; + + if (p->ack != ACK_PENDING && p->ack != ACK_COMPLETE) + return; + + request = allocate_request(p); + if (request == NULL) { + /* FIXME: send statically allocated busy packet. */ + return; + } + + offset = ((u64)HEADER_GET_OFFSET_HIGH(p->header[1]) << 32) | + p->header[2]; + + if (!is_in_fcp_region(offset, request->length)) + handle_exclusive_region_request(card, p, request, offset); + else + handle_fcp_region_request(card, p, request, offset); + +} EXPORT_SYMBOL(fw_core_handle_request); void fw_core_handle_response(struct fw_card *card, struct fw_packet *p) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 96768e16086..a61571c63c5 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -2226,7 +2226,6 @@ static int ohci_queue_iso_receive_dualbuffer(struct fw_iso_context *base, if (rest == 0) return -EINVAL; - /* FIXME: make packet-per-buffer/dual-buffer a context option */ while (rest > 0) { d = context_get_descriptors(&ctx->context, z + header_z, &d_bus); @@ -2470,7 +2469,10 @@ static int __devinit pci_probe(struct pci_dev *dev, } version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff; +#if 0 + /* FIXME: make it a context option or remove dual-buffer mode */ ohci->use_dualbuffer = version >= OHCI_VERSION_1_1; +#endif /* dual-buffer mode is broken if more than one IR context is active */ if (dev->vendor == PCI_VENDOR_ID_AGERE && diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index ff2f1042cb4..766c46875a2 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -434,11 +434,11 @@ static int drm_version(struct drm_device *dev, void *data, * Looks up the ioctl function in the ::ioctls table, checking for root * previleges if so required, and dispatches to the respective function. */ -int drm_ioctl(struct inode *inode, struct file *filp, +long drm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct drm_file *file_priv = filp->private_data; - struct drm_device *dev = file_priv->minor->dev; + struct drm_device *dev; struct drm_ioctl_desc *ioctl; drm_ioctl_t *func; unsigned int nr = DRM_IOCTL_NR(cmd); @@ -446,6 +446,7 @@ int drm_ioctl(struct inode *inode, struct file *filp, char stack_kdata[128]; char *kdata = NULL; + dev = file_priv->minor->dev; atomic_inc(&dev->ioctl_count); atomic_inc(&dev->counts[_DRM_STAT_IOCTLS]); ++file_priv->ioctl_count; @@ -501,7 +502,13 @@ int drm_ioctl(struct inode *inode, struct file *filp, goto err_i1; } } - retcode = func(dev, kdata, file_priv); + if (ioctl->flags & DRM_UNLOCKED) + retcode = func(dev, kdata, file_priv); + else { + lock_kernel(); + retcode = func(dev, kdata, file_priv); + unlock_kernel(); + } if (cmd & IOC_OUT) { if (copy_to_user((void __user *)arg, kdata, diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index c39b26f1abe..5c9f79877cb 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -913,7 +913,7 @@ static int drm_cvt_modes(struct drm_connector *connector, const int rates[] = { 60, 85, 75, 60, 50 }; for (i = 0; i < 4; i++) { - int width, height; + int uninitialized_var(width), height; cvt = &(timing->data.other_data.data.cvt[i]); height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 8) + 1) * 2; diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c index 282d9fdf9f4..d61d185cf04 100644 --- a/drivers/gpu/drm/drm_ioc32.c +++ b/drivers/gpu/drm/drm_ioc32.c @@ -104,7 +104,7 @@ static int compat_drm_version(struct file *file, unsigned int cmd, &version->desc)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, + err = drm_ioctl(file, DRM_IOCTL_VERSION, (unsigned long)version); if (err) return err; @@ -145,8 +145,7 @@ static int compat_drm_getunique(struct file *file, unsigned int cmd, &u->unique)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_UNIQUE, (unsigned long)u); + err = drm_ioctl(file, DRM_IOCTL_GET_UNIQUE, (unsigned long)u); if (err) return err; @@ -174,8 +173,7 @@ static int compat_drm_setunique(struct file *file, unsigned int cmd, &u->unique)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_SET_UNIQUE, (unsigned long)u); + return drm_ioctl(file, DRM_IOCTL_SET_UNIQUE, (unsigned long)u); } typedef struct drm_map32 { @@ -205,8 +203,7 @@ static int compat_drm_getmap(struct file *file, unsigned int cmd, if (__put_user(idx, &map->offset)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_MAP, (unsigned long)map); + err = drm_ioctl(file, DRM_IOCTL_GET_MAP, (unsigned long)map); if (err) return err; @@ -246,8 +243,7 @@ static int compat_drm_addmap(struct file *file, unsigned int cmd, || __put_user(m32.flags, &map->flags)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_ADD_MAP, (unsigned long)map); + err = drm_ioctl(file, DRM_IOCTL_ADD_MAP, (unsigned long)map); if (err) return err; @@ -284,8 +280,7 @@ static int compat_drm_rmmap(struct file *file, unsigned int cmd, if (__put_user((void *)(unsigned long)handle, &map->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RM_MAP, (unsigned long)map); + return drm_ioctl(file, DRM_IOCTL_RM_MAP, (unsigned long)map); } typedef struct drm_client32 { @@ -314,8 +309,7 @@ static int compat_drm_getclient(struct file *file, unsigned int cmd, if (__put_user(idx, &client->idx)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_CLIENT, (unsigned long)client); + err = drm_ioctl(file, DRM_IOCTL_GET_CLIENT, (unsigned long)client); if (err) return err; @@ -351,8 +345,7 @@ static int compat_drm_getstats(struct file *file, unsigned int cmd, if (!access_ok(VERIFY_WRITE, stats, sizeof(*stats))) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_STATS, (unsigned long)stats); + err = drm_ioctl(file, DRM_IOCTL_GET_STATS, (unsigned long)stats); if (err) return err; @@ -395,8 +388,7 @@ static int compat_drm_addbufs(struct file *file, unsigned int cmd, || __put_user(agp_start, &buf->agp_start)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_ADD_BUFS, (unsigned long)buf); + err = drm_ioctl(file, DRM_IOCTL_ADD_BUFS, (unsigned long)buf); if (err) return err; @@ -427,8 +419,7 @@ static int compat_drm_markbufs(struct file *file, unsigned int cmd, || __put_user(b32.high_mark, &buf->high_mark)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MARK_BUFS, (unsigned long)buf); + return drm_ioctl(file, DRM_IOCTL_MARK_BUFS, (unsigned long)buf); } typedef struct drm_buf_info32 { @@ -469,8 +460,7 @@ static int compat_drm_infobufs(struct file *file, unsigned int cmd, || __put_user(list, &request->list)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_INFO_BUFS, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_INFO_BUFS, (unsigned long)request); if (err) return err; @@ -531,8 +521,7 @@ static int compat_drm_mapbufs(struct file *file, unsigned int cmd, || __put_user(list, &request->list)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MAP_BUFS, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_MAP_BUFS, (unsigned long)request); if (err) return err; @@ -578,8 +567,7 @@ static int compat_drm_freebufs(struct file *file, unsigned int cmd, &request->list)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_FREE_BUFS, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_FREE_BUFS, (unsigned long)request); } typedef struct drm_ctx_priv_map32 { @@ -605,8 +593,7 @@ static int compat_drm_setsareactx(struct file *file, unsigned int cmd, &request->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_SET_SAREA_CTX, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_SET_SAREA_CTX, (unsigned long)request); } static int compat_drm_getsareactx(struct file *file, unsigned int cmd, @@ -628,8 +615,7 @@ static int compat_drm_getsareactx(struct file *file, unsigned int cmd, if (__put_user(ctx_id, &request->ctx_id)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_SAREA_CTX, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_GET_SAREA_CTX, (unsigned long)request); if (err) return err; @@ -664,8 +650,7 @@ static int compat_drm_resctx(struct file *file, unsigned int cmd, &res->contexts)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RES_CTX, (unsigned long)res); + err = drm_ioctl(file, DRM_IOCTL_RES_CTX, (unsigned long)res); if (err) return err; @@ -718,8 +703,7 @@ static int compat_drm_dma(struct file *file, unsigned int cmd, &d->request_sizes)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_DMA, (unsigned long)d); + err = drm_ioctl(file, DRM_IOCTL_DMA, (unsigned long)d); if (err) return err; @@ -751,8 +735,7 @@ static int compat_drm_agp_enable(struct file *file, unsigned int cmd, if (put_user(m32.mode, &mode->mode)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_ENABLE, (unsigned long)mode); + return drm_ioctl(file, DRM_IOCTL_AGP_ENABLE, (unsigned long)mode); } typedef struct drm_agp_info32 { @@ -781,8 +764,7 @@ static int compat_drm_agp_info(struct file *file, unsigned int cmd, if (!access_ok(VERIFY_WRITE, info, sizeof(*info))) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_INFO, (unsigned long)info); + err = drm_ioctl(file, DRM_IOCTL_AGP_INFO, (unsigned long)info); if (err) return err; @@ -827,16 +809,14 @@ static int compat_drm_agp_alloc(struct file *file, unsigned int cmd, || __put_user(req32.type, &request->type)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_ALLOC, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_AGP_ALLOC, (unsigned long)request); if (err) return err; if (__get_user(req32.handle, &request->handle) || __get_user(req32.physical, &request->physical) || copy_to_user(argp, &req32, sizeof(req32))) { - drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_FREE, (unsigned long)request); + drm_ioctl(file, DRM_IOCTL_AGP_FREE, (unsigned long)request); return -EFAULT; } @@ -856,8 +836,7 @@ static int compat_drm_agp_free(struct file *file, unsigned int cmd, || __put_user(handle, &request->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_FREE, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_AGP_FREE, (unsigned long)request); } typedef struct drm_agp_binding32 { @@ -881,8 +860,7 @@ static int compat_drm_agp_bind(struct file *file, unsigned int cmd, || __put_user(req32.offset, &request->offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_BIND, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_AGP_BIND, (unsigned long)request); } static int compat_drm_agp_unbind(struct file *file, unsigned int cmd, @@ -898,8 +876,7 @@ static int compat_drm_agp_unbind(struct file *file, unsigned int cmd, || __put_user(handle, &request->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_UNBIND, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_AGP_UNBIND, (unsigned long)request); } #endif /* __OS_HAS_AGP */ @@ -923,8 +900,7 @@ static int compat_drm_sg_alloc(struct file *file, unsigned int cmd, || __put_user(x, &request->size)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_SG_ALLOC, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_SG_ALLOC, (unsigned long)request); if (err) return err; @@ -950,8 +926,7 @@ static int compat_drm_sg_free(struct file *file, unsigned int cmd, || __put_user(x << PAGE_SHIFT, &request->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_SG_FREE, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_SG_FREE, (unsigned long)request); } #if defined(CONFIG_X86) || defined(CONFIG_IA64) @@ -981,8 +956,7 @@ static int compat_drm_update_draw(struct file *file, unsigned int cmd, __put_user(update32.data, &request->data)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_UPDATE_DRAW, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_UPDATE_DRAW, (unsigned long)request); return err; } #endif @@ -1023,8 +997,7 @@ static int compat_drm_wait_vblank(struct file *file, unsigned int cmd, || __put_user(req32.request.signal, &request->request.signal)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_WAIT_VBLANK, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_WAIT_VBLANK, (unsigned long)request); if (err) return err; @@ -1094,16 +1067,14 @@ long drm_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) * than always failing. */ if (nr >= ARRAY_SIZE(drm_compat_ioctls)) - return drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg); + return drm_ioctl(filp, cmd, arg); fn = drm_compat_ioctls[nr]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index d7d7eac3ddd..cdec3297712 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -358,7 +358,7 @@ struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm, if (entry->size >= size + wasted) { if (!best_match) return entry; - if (size < best_size) { + if (entry->size < best_size) { best = entry; best_size = entry->size; } @@ -408,7 +408,7 @@ struct drm_mm_node *drm_mm_search_free_in_range(const struct drm_mm *mm, if (entry->size >= size + wasted) { if (!best_match) return entry; - if (size < best_size) { + if (entry->size < best_size) { best = entry; best_size = entry->size; } diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c index 9422a74c8b5..81681a07a80 100644 --- a/drivers/gpu/drm/i2c/ch7006_drv.c +++ b/drivers/gpu/drm/i2c/ch7006_drv.c @@ -408,6 +408,11 @@ static int ch7006_probe(struct i2c_client *client, const struct i2c_device_id *i ch7006_info(client, "Detected version ID: %x\n", val); + /* I don't know what this is for, but otherwise I get no + * signal. + */ + ch7006_write(client, 0x3d, 0x0); + return 0; fail: diff --git a/drivers/gpu/drm/i2c/ch7006_mode.c b/drivers/gpu/drm/i2c/ch7006_mode.c index 87f5445092e..e447dfb6389 100644 --- a/drivers/gpu/drm/i2c/ch7006_mode.c +++ b/drivers/gpu/drm/i2c/ch7006_mode.c @@ -427,11 +427,6 @@ void ch7006_state_load(struct i2c_client *client, ch7006_load_reg(client, state, CH7006_SUBC_INC7); ch7006_load_reg(client, state, CH7006_PLL_CONTROL); ch7006_load_reg(client, state, CH7006_CALC_SUBC_INC0); - - /* I don't know what this is for, but otherwise I get no - * signal. - */ - ch7006_write(client, 0x3d, 0x0); } void ch7006_state_save(struct i2c_client *client, diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c index 7d1d88cdf2d..de32d22a8c3 100644 --- a/drivers/gpu/drm/i810/i810_dma.c +++ b/drivers/gpu/drm/i810/i810_dma.c @@ -115,7 +115,7 @@ static int i810_mmap_buffers(struct file *filp, struct vm_area_struct *vma) static const struct file_operations i810_buffer_fops = { .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = i810_mmap_buffers, .fasync = drm_fasync, }; diff --git a/drivers/gpu/drm/i810/i810_drv.c b/drivers/gpu/drm/i810/i810_drv.c index fabb9a81796..c1e02752e02 100644 --- a/drivers/gpu/drm/i810/i810_drv.c +++ b/drivers/gpu/drm/i810/i810_drv.c @@ -59,7 +59,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/i830/i830_dma.c b/drivers/gpu/drm/i830/i830_dma.c index 877bf6cb14a..06bd732e646 100644 --- a/drivers/gpu/drm/i830/i830_dma.c +++ b/drivers/gpu/drm/i830/i830_dma.c @@ -117,7 +117,7 @@ static int i830_mmap_buffers(struct file *filp, struct vm_area_struct *vma) static const struct file_operations i830_buffer_fops = { .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = i830_mmap_buffers, .fasync = drm_fasync, }; diff --git a/drivers/gpu/drm/i830/i830_drv.c b/drivers/gpu/drm/i830/i830_drv.c index 389597e4a62..44f990bed8f 100644 --- a/drivers/gpu/drm/i830/i830_drv.c +++ b/drivers/gpu/drm/i830/i830_drv.c @@ -70,7 +70,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 2fa21786205..24286ca168f 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -329,7 +329,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_gem_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/i915/i915_ioc32.c b/drivers/gpu/drm/i915/i915_ioc32.c index 1fe68a251b7..13b028994b2 100644 --- a/drivers/gpu/drm/i915/i915_ioc32.c +++ b/drivers/gpu/drm/i915/i915_ioc32.c @@ -66,8 +66,7 @@ static int compat_i915_batchbuffer(struct file *file, unsigned int cmd, &batchbuffer->cliprects)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_BATCHBUFFER, + return drm_ioctl(file, DRM_IOCTL_I915_BATCHBUFFER, (unsigned long)batchbuffer); } @@ -102,8 +101,8 @@ static int compat_i915_cmdbuffer(struct file *file, unsigned int cmd, &cmdbuffer->cliprects)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_CMDBUFFER, (unsigned long)cmdbuffer); + return drm_ioctl(file, DRM_IOCTL_I915_CMDBUFFER, + (unsigned long)cmdbuffer); } typedef struct drm_i915_irq_emit32 { @@ -125,8 +124,8 @@ static int compat_i915_irq_emit(struct file *file, unsigned int cmd, &request->irq_seq)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_IRQ_EMIT, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_I915_IRQ_EMIT, + (unsigned long)request); } typedef struct drm_i915_getparam32 { int param; @@ -149,8 +148,8 @@ static int compat_i915_getparam(struct file *file, unsigned int cmd, &request->value)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_GETPARAM, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_I915_GETPARAM, + (unsigned long)request); } typedef struct drm_i915_mem_alloc32 { @@ -178,8 +177,8 @@ static int compat_i915_alloc(struct file *file, unsigned int cmd, &request->region_offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_ALLOC, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_I915_ALLOC, + (unsigned long)request); } drm_ioctl_compat_t *i915_compat_ioctls[] = { @@ -211,12 +210,10 @@ long i915_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(i915_compat_ioctls)) fn = i915_compat_ioctls[nr - DRM_COMMAND_BASE]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/mga/mga_drv.c b/drivers/gpu/drm/mga/mga_drv.c index 97ee566ef74..ddfe16197b5 100644 --- a/drivers/gpu/drm/mga/mga_drv.c +++ b/drivers/gpu/drm/mga/mga_drv.c @@ -68,7 +68,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/mga/mga_ioc32.c b/drivers/gpu/drm/mga/mga_ioc32.c index 30d00478dde..c1f877b7bac 100644 --- a/drivers/gpu/drm/mga/mga_ioc32.c +++ b/drivers/gpu/drm/mga/mga_ioc32.c @@ -100,8 +100,7 @@ static int compat_mga_init(struct file *file, unsigned int cmd, if (err) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MGA_INIT, (unsigned long)init); + return drm_ioctl(file, DRM_IOCTL_MGA_INIT, (unsigned long)init); } typedef struct drm_mga_getparam32 { @@ -125,8 +124,7 @@ static int compat_mga_getparam(struct file *file, unsigned int cmd, &getparam->value)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MGA_GETPARAM, (unsigned long)getparam); + return drm_ioctl(file, DRM_IOCTL_MGA_GETPARAM, (unsigned long)getparam); } typedef struct drm_mga_drm_bootstrap32 { @@ -166,8 +164,7 @@ static int compat_mga_dma_bootstrap(struct file *file, unsigned int cmd, || __put_user(dma_bootstrap32.agp_size, &dma_bootstrap->agp_size)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MGA_DMA_BOOTSTRAP, + err = drm_ioctl(file, DRM_IOCTL_MGA_DMA_BOOTSTRAP, (unsigned long)dma_bootstrap); if (err) return err; @@ -220,12 +217,10 @@ long mga_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(mga_compat_ioctls)) fn = mga_compat_ioctls[nr - DRM_COMMAND_BASE]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/nouveau/Makefile b/drivers/gpu/drm/nouveau/Makefile index 1d90d4d0144..48c290b5da8 100644 --- a/drivers/gpu/drm/nouveau/Makefile +++ b/drivers/gpu/drm/nouveau/Makefile @@ -8,14 +8,15 @@ nouveau-y := nouveau_drv.o nouveau_state.o nouveau_channel.o nouveau_mem.o \ nouveau_sgdma.o nouveau_dma.o \ nouveau_bo.o nouveau_fence.o nouveau_gem.o nouveau_ttm.o \ nouveau_hw.o nouveau_calc.o nouveau_bios.o nouveau_i2c.o \ - nouveau_display.o nouveau_connector.o nouveau_fbcon.o \ - nouveau_dp.o \ + nouveau_display.o nouveau_connector.o nouveau_fbcon.o \ + nouveau_dp.o nouveau_grctx.o \ nv04_timer.o \ nv04_mc.o nv40_mc.o nv50_mc.o \ nv04_fb.o nv10_fb.o nv40_fb.o \ nv04_fifo.o nv10_fifo.o nv40_fifo.o nv50_fifo.o \ nv04_graph.o nv10_graph.o nv20_graph.o \ nv40_graph.o nv50_graph.o \ + nv40_grctx.o \ nv04_instmem.o nv50_instmem.o \ nv50_crtc.o nv50_dac.o nv50_sor.o \ nv50_cursor.o nv50_display.o nv50_fbcon.o \ diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 5eec5ed6948..ba143972769 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -181,43 +181,42 @@ struct methods { const char desc[8]; void (*loadbios)(struct drm_device *, uint8_t *); const bool rw; - int score; }; static struct methods nv04_methods[] = { { "PROM", load_vbios_prom, false }, { "PRAMIN", load_vbios_pramin, true }, { "PCIROM", load_vbios_pci, true }, - { } }; static struct methods nv50_methods[] = { { "PRAMIN", load_vbios_pramin, true }, { "PROM", load_vbios_prom, false }, { "PCIROM", load_vbios_pci, true }, - { } }; +#define METHODCNT 3 + static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data) { struct drm_nouveau_private *dev_priv = dev->dev_private; - struct methods *methods, *method; + struct methods *methods; + int i; int testscore = 3; + int scores[METHODCNT]; if (nouveau_vbios) { - method = nv04_methods; - while (method->loadbios) { - if (!strcasecmp(nouveau_vbios, method->desc)) + methods = nv04_methods; + for (i = 0; i < METHODCNT; i++) + if (!strcasecmp(nouveau_vbios, methods[i].desc)) break; - method++; - } - if (method->loadbios) { + if (i < METHODCNT) { NV_INFO(dev, "Attempting to use BIOS image from %s\n", - method->desc); + methods[i].desc); - method->loadbios(dev, data); - if (score_vbios(dev, data, method->rw)) + methods[i].loadbios(dev, data); + if (score_vbios(dev, data, methods[i].rw)) return true; } @@ -229,28 +228,24 @@ static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data) else methods = nv50_methods; - method = methods; - while (method->loadbios) { + for (i = 0; i < METHODCNT; i++) { NV_TRACE(dev, "Attempting to load BIOS image from %s\n", - method->desc); + methods[i].desc); data[0] = data[1] = 0; /* avoid reuse of previous image */ - method->loadbios(dev, data); - method->score = score_vbios(dev, data, method->rw); - if (method->score == testscore) + methods[i].loadbios(dev, data); + scores[i] = score_vbios(dev, data, methods[i].rw); + if (scores[i] == testscore) return true; - method++; } while (--testscore > 0) { - method = methods; - while (method->loadbios) { - if (method->score == testscore) { + for (i = 0; i < METHODCNT; i++) { + if (scores[i] == testscore) { NV_TRACE(dev, "Using BIOS image from %s\n", - method->desc); - method->loadbios(dev, data); + methods[i].desc); + methods[i].loadbios(dev, data); return true; } - method++; } } @@ -261,10 +256,7 @@ static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data) struct init_tbl_entry { char *name; uint8_t id; - int length; - int length_offset; - int length_multiplier; - bool (*handler)(struct nvbios *, uint16_t, struct init_exec *); + int (*handler)(struct nvbios *, uint16_t, struct init_exec *); }; struct bit_entry { @@ -820,7 +812,7 @@ static uint32_t get_tmds_index_reg(struct drm_device *dev, uint8_t mlv) } } -static bool +static int init_io_restrict_prog(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -852,9 +844,10 @@ init_io_restrict_prog(struct nvbios *bios, uint16_t offset, uint32_t reg = ROM32(bios->data[offset + 7]); uint8_t config; uint32_t configval; + int len = 11 + count * 4; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, " "Shift: 0x%02X, Count: 0x%02X, Reg: 0x%08X\n", @@ -865,7 +858,7 @@ init_io_restrict_prog(struct nvbios *bios, uint16_t offset, NV_ERROR(bios->dev, "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n", offset, config, count); - return false; + return 0; } configval = ROM32(bios->data[offset + 11 + config * 4]); @@ -874,10 +867,10 @@ init_io_restrict_prog(struct nvbios *bios, uint16_t offset, bios_wr32(bios, reg, configval); - return true; + return len; } -static bool +static int init_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -912,10 +905,10 @@ init_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) iexec->repeat = false; - return true; + return 2; } -static bool +static int init_io_restrict_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -951,9 +944,10 @@ init_io_restrict_pll(struct nvbios *bios, uint16_t offset, uint32_t reg = ROM32(bios->data[offset + 8]); uint8_t config; uint16_t freq; + int len = 12 + count * 2; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, " "Shift: 0x%02X, IO Flag Condition: 0x%02X, " @@ -966,7 +960,7 @@ init_io_restrict_pll(struct nvbios *bios, uint16_t offset, NV_ERROR(bios->dev, "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n", offset, config, count); - return false; + return 0; } freq = ROM16(bios->data[offset + 12 + config * 2]); @@ -986,10 +980,10 @@ init_io_restrict_pll(struct nvbios *bios, uint16_t offset, setPLL(bios, reg, freq * 10); - return true; + return len; } -static bool +static int init_end_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1007,12 +1001,12 @@ init_end_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) * we're not in repeat mode */ if (iexec->repeat) - return false; + return 0; - return true; + return 1; } -static bool +static int init_copy(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1041,7 +1035,7 @@ init_copy(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t crtcdata; if (!iexec->execute) - return true; + return 11; BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Shift: 0x%02X, SrcMask: 0x%02X, " "Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X\n", @@ -1060,10 +1054,10 @@ init_copy(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) crtcdata |= (uint8_t)data; bios_idxprt_wr(bios, crtcport, crtcindex, crtcdata); - return true; + return 11; } -static bool +static int init_not(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1079,10 +1073,10 @@ init_not(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) BIOSLOG(bios, "0x%04X: ------ Executing following commands ------\n", offset); iexec->execute = !iexec->execute; - return true; + return 1; } -static bool +static int init_io_flag_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1100,7 +1094,7 @@ init_io_flag_condition(struct nvbios *bios, uint16_t offset, uint8_t cond = bios->data[offset + 1]; if (!iexec->execute) - return true; + return 2; if (io_flag_condition_met(bios, offset, cond)) BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset); @@ -1109,10 +1103,10 @@ init_io_flag_condition(struct nvbios *bios, uint16_t offset, iexec->execute = false; } - return true; + return 2; } -static bool +static int init_idx_addr_latched(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1140,11 +1134,12 @@ init_idx_addr_latched(struct nvbios *bios, uint16_t offset, uint32_t mask = ROM32(bios->data[offset + 9]); uint32_t data = ROM32(bios->data[offset + 13]); uint8_t count = bios->data[offset + 17]; + int len = 18 + count * 2; uint32_t value; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: ControlReg: 0x%08X, DataReg: 0x%08X, " "Mask: 0x%08X, Data: 0x%08X, Count: 0x%02X\n", @@ -1164,10 +1159,10 @@ init_idx_addr_latched(struct nvbios *bios, uint16_t offset, bios_wr32(bios, controlreg, value); } - return true; + return len; } -static bool +static int init_io_restrict_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1196,25 +1191,26 @@ init_io_restrict_pll2(struct nvbios *bios, uint16_t offset, uint8_t shift = bios->data[offset + 5]; uint8_t count = bios->data[offset + 6]; uint32_t reg = ROM32(bios->data[offset + 7]); + int len = 11 + count * 4; uint8_t config; uint32_t freq; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, " "Shift: 0x%02X, Count: 0x%02X, Reg: 0x%08X\n", offset, crtcport, crtcindex, mask, shift, count, reg); if (!reg) - return true; + return len; config = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) >> shift; if (config > count) { NV_ERROR(bios->dev, "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n", offset, config, count); - return false; + return 0; } freq = ROM32(bios->data[offset + 11 + config * 4]); @@ -1224,10 +1220,10 @@ init_io_restrict_pll2(struct nvbios *bios, uint16_t offset, setPLL(bios, reg, freq); - return true; + return len; } -static bool +static int init_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1244,16 +1240,16 @@ init_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t freq = ROM32(bios->data[offset + 5]); if (!iexec->execute) - return true; + return 9; BIOSLOG(bios, "0x%04X: Reg: 0x%04X, Freq: %dkHz\n", offset, reg, freq); setPLL(bios, reg, freq); - return true; + return 9; } -static bool +static int init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1277,12 +1273,13 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t i2c_index = bios->data[offset + 1]; uint8_t i2c_address = bios->data[offset + 2]; uint8_t count = bios->data[offset + 3]; + int len = 4 + count * 3; struct nouveau_i2c_chan *chan; struct i2c_msg msg; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, " "Count: 0x%02X\n", @@ -1290,7 +1287,7 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) chan = init_i2c_device_find(bios->dev, i2c_index); if (!chan) - return false; + return 0; for (i = 0; i < count; i++) { uint8_t i2c_reg = bios->data[offset + 4 + i * 3]; @@ -1303,7 +1300,7 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) msg.len = 1; msg.buf = &value; if (i2c_transfer(&chan->adapter, &msg, 1) != 1) - return false; + return 0; BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: 0x%02X, " "Mask: 0x%02X, Data: 0x%02X\n", @@ -1317,14 +1314,14 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) msg.len = 1; msg.buf = &value; if (i2c_transfer(&chan->adapter, &msg, 1) != 1) - return false; + return 0; } } - return true; + return len; } -static bool +static int init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1346,12 +1343,13 @@ init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t i2c_index = bios->data[offset + 1]; uint8_t i2c_address = bios->data[offset + 2]; uint8_t count = bios->data[offset + 3]; + int len = 4 + count * 2; struct nouveau_i2c_chan *chan; struct i2c_msg msg; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, " "Count: 0x%02X\n", @@ -1359,7 +1357,7 @@ init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) chan = init_i2c_device_find(bios->dev, i2c_index); if (!chan) - return false; + return 0; for (i = 0; i < count; i++) { uint8_t i2c_reg = bios->data[offset + 4 + i * 2]; @@ -1374,14 +1372,14 @@ init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) msg.len = 1; msg.buf = &data; if (i2c_transfer(&chan->adapter, &msg, 1) != 1) - return false; + return 0; } } - return true; + return len; } -static bool +static int init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1401,13 +1399,14 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t i2c_index = bios->data[offset + 1]; uint8_t i2c_address = bios->data[offset + 2]; uint8_t count = bios->data[offset + 3]; + int len = 4 + count; struct nouveau_i2c_chan *chan; struct i2c_msg msg; uint8_t data[256]; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, " "Count: 0x%02X\n", @@ -1415,7 +1414,7 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) chan = init_i2c_device_find(bios->dev, i2c_index); if (!chan) - return false; + return 0; for (i = 0; i < count; i++) { data[i] = bios->data[offset + 4 + i]; @@ -1429,13 +1428,13 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) msg.len = count; msg.buf = data; if (i2c_transfer(&chan->adapter, &msg, 1) != 1) - return false; + return 0; } - return true; + return len; } -static bool +static int init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1460,7 +1459,7 @@ init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t reg, value; if (!iexec->execute) - return true; + return 5; BIOSLOG(bios, "0x%04X: MagicLookupValue: 0x%02X, TMDSAddr: 0x%02X, " "Mask: 0x%02X, Data: 0x%02X\n", @@ -1468,7 +1467,7 @@ init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) reg = get_tmds_index_reg(bios->dev, mlv); if (!reg) - return false; + return 0; bios_wr32(bios, reg, tmdsaddr | NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE); @@ -1476,10 +1475,10 @@ init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) bios_wr32(bios, reg + 4, value); bios_wr32(bios, reg, tmdsaddr); - return true; + return 5; } -static bool +static int init_zm_tmds_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1500,18 +1499,19 @@ init_zm_tmds_group(struct nvbios *bios, uint16_t offset, uint8_t mlv = bios->data[offset + 1]; uint8_t count = bios->data[offset + 2]; + int len = 3 + count * 2; uint32_t reg; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: MagicLookupValue: 0x%02X, Count: 0x%02X\n", offset, mlv, count); reg = get_tmds_index_reg(bios->dev, mlv); if (!reg) - return false; + return 0; for (i = 0; i < count; i++) { uint8_t tmdsaddr = bios->data[offset + 3 + i * 2]; @@ -1521,10 +1521,10 @@ init_zm_tmds_group(struct nvbios *bios, uint16_t offset, bios_wr32(bios, reg, tmdsaddr); } - return true; + return len; } -static bool +static int init_cr_idx_adr_latch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1547,11 +1547,12 @@ init_cr_idx_adr_latch(struct nvbios *bios, uint16_t offset, uint8_t crtcindex2 = bios->data[offset + 2]; uint8_t baseaddr = bios->data[offset + 3]; uint8_t count = bios->data[offset + 4]; + int len = 5 + count; uint8_t oldaddr, data; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: Index1: 0x%02X, Index2: 0x%02X, " "BaseAddr: 0x%02X, Count: 0x%02X\n", @@ -1568,10 +1569,10 @@ init_cr_idx_adr_latch(struct nvbios *bios, uint16_t offset, bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex1, oldaddr); - return true; + return len; } -static bool +static int init_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1592,7 +1593,7 @@ init_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t value; if (!iexec->execute) - return true; + return 4; BIOSLOG(bios, "0x%04X: Index: 0x%02X, Mask: 0x%02X, Data: 0x%02X\n", offset, crtcindex, mask, data); @@ -1601,10 +1602,10 @@ init_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) value |= data; bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex, value); - return true; + return 4; } -static bool +static int init_zm_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1621,14 +1622,14 @@ init_zm_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t data = bios->data[offset + 2]; if (!iexec->execute) - return true; + return 3; bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex, data); - return true; + return 3; } -static bool +static int init_zm_cr_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1645,18 +1646,19 @@ init_zm_cr_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) */ uint8_t count = bios->data[offset + 1]; + int len = 2 + count * 2; int i; if (!iexec->execute) - return true; + return len; for (i = 0; i < count; i++) init_zm_cr(bios, offset + 2 + 2 * i - 1, iexec); - return true; + return len; } -static bool +static int init_condition_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1680,7 +1682,7 @@ init_condition_time(struct nvbios *bios, uint16_t offset, unsigned cnt; if (!iexec->execute) - return true; + return 3; if (retries > 100) retries = 100; @@ -1711,10 +1713,10 @@ init_condition_time(struct nvbios *bios, uint16_t offset, iexec->execute = false; } - return true; + return 3; } -static bool +static int init_zm_reg_sequence(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1734,10 +1736,11 @@ init_zm_reg_sequence(struct nvbios *bios, uint16_t offset, uint32_t basereg = ROM32(bios->data[offset + 1]); uint32_t count = bios->data[offset + 5]; + int len = 6 + count * 4; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: BaseReg: 0x%08X, Count: 0x%02X\n", offset, basereg, count); @@ -1749,10 +1752,10 @@ init_zm_reg_sequence(struct nvbios *bios, uint16_t offset, bios_wr32(bios, reg, data); } - return true; + return len; } -static bool +static int init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1768,7 +1771,7 @@ init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint16_t sub_offset = ROM16(bios->data[offset + 1]); if (!iexec->execute) - return true; + return 3; BIOSLOG(bios, "0x%04X: Executing subroutine at 0x%04X\n", offset, sub_offset); @@ -1777,10 +1780,10 @@ init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) BIOSLOG(bios, "0x%04X: End of 0x%04X subroutine\n", offset, sub_offset); - return true; + return 3; } -static bool +static int init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1808,7 +1811,7 @@ init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t srcvalue, dstvalue; if (!iexec->execute) - return true; + return 22; BIOSLOG(bios, "0x%04X: SrcReg: 0x%08X, Shift: 0x%02X, SrcMask: 0x%08X, " "Xor: 0x%08X, DstReg: 0x%08X, DstMask: 0x%08X\n", @@ -1827,10 +1830,10 @@ init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) bios_wr32(bios, dstreg, dstvalue | srcvalue); - return true; + return 22; } -static bool +static int init_zm_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1848,14 +1851,14 @@ init_zm_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t data = bios->data[offset + 4]; if (!iexec->execute) - return true; + return 5; bios_idxprt_wr(bios, crtcport, crtcindex, data); - return true; + return 5; } -static bool +static int init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1904,7 +1907,7 @@ init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) struct drm_nouveau_private *dev_priv = bios->dev->dev_private; if (dev_priv->card_type >= NV_50) - return true; + return 1; /* * On every card I've seen, this step gets done for us earlier in @@ -1922,10 +1925,10 @@ init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) /* write back the saved configuration value */ bios_wr32(bios, NV_PFB_CFG0, bios->state.saved_nv_pfb_cfg0); - return true; + return 1; } -static bool +static int init_reset(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1959,10 +1962,10 @@ init_reset(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) pci_nv_20 &= ~NV_PBUS_PCI_NV_20_ROM_SHADOW_ENABLED; /* 0xfffffffe */ bios_wr32(bios, NV_PBUS_PCI_NV_20, pci_nv_20); - return true; + return 13; } -static bool +static int init_configure_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1983,7 +1986,7 @@ init_configure_mem(struct nvbios *bios, uint16_t offset, uint32_t reg, data; if (bios->major_version > 2) - return false; + return 0; bios_idxprt_wr(bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX, bios_idxprt_rd( bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX) | 0x20); @@ -2015,10 +2018,10 @@ init_configure_mem(struct nvbios *bios, uint16_t offset, bios_wr32(bios, reg, data); } - return true; + return 1; } -static bool +static int init_configure_clk(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2038,7 +2041,7 @@ init_configure_clk(struct nvbios *bios, uint16_t offset, int clock; if (bios->major_version > 2) - return false; + return 0; clock = ROM16(bios->data[meminitoffs + 4]) * 10; setPLL(bios, NV_PRAMDAC_NVPLL_COEFF, clock); @@ -2048,10 +2051,10 @@ init_configure_clk(struct nvbios *bios, uint16_t offset, clock *= 2; setPLL(bios, NV_PRAMDAC_MPLL_COEFF, clock); - return true; + return 1; } -static bool +static int init_configure_preinit(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2071,15 +2074,15 @@ init_configure_preinit(struct nvbios *bios, uint16_t offset, uint8_t cr3c = ((straps << 2) & 0xf0) | (straps & (1 << 6)); if (bios->major_version > 2) - return false; + return 0; bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_SCRATCH4__INDEX, cr3c); - return true; + return 1; } -static bool +static int init_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2099,7 +2102,7 @@ init_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t data = bios->data[offset + 4]; if (!iexec->execute) - return true; + return 5; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Mask: 0x%02X, Data: 0x%02X\n", offset, crtcport, mask, data); @@ -2158,15 +2161,15 @@ init_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) for (i = 0; i < 2; i++) bios_wr32(bios, 0x614108 + (i*0x800), bios_rd32( bios, 0x614108 + (i*0x800)) & 0x0fffffff); - return true; + return 5; } bios_port_wr(bios, crtcport, (bios_port_rd(bios, crtcport) & mask) | data); - return true; + return 5; } -static bool +static int init_sub(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2181,7 +2184,7 @@ init_sub(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t sub = bios->data[offset + 1]; if (!iexec->execute) - return true; + return 2; BIOSLOG(bios, "0x%04X: Calling script %d\n", offset, sub); @@ -2191,10 +2194,10 @@ init_sub(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) BIOSLOG(bios, "0x%04X: End of script %d\n", offset, sub); - return true; + return 2; } -static bool +static int init_ram_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2215,7 +2218,7 @@ init_ram_condition(struct nvbios *bios, uint16_t offset, uint8_t data; if (!iexec->execute) - return true; + return 3; data = bios_rd32(bios, NV_PFB_BOOT_0) & mask; @@ -2229,10 +2232,10 @@ init_ram_condition(struct nvbios *bios, uint16_t offset, iexec->execute = false; } - return true; + return 3; } -static bool +static int init_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2251,17 +2254,17 @@ init_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t data = ROM32(bios->data[offset + 9]); if (!iexec->execute) - return true; + return 13; BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Mask: 0x%08X, Data: 0x%08X\n", offset, reg, mask, data); bios_wr32(bios, reg, (bios_rd32(bios, reg) & mask) | data); - return true; + return 13; } -static bool +static int init_macro(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2285,7 +2288,7 @@ init_macro(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) int i; if (!iexec->execute) - return true; + return 2; BIOSLOG(bios, "0x%04X: Macro: 0x%02X, MacroTableIndex: 0x%02X, " "Count: 0x%02X\n", @@ -2300,10 +2303,10 @@ init_macro(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) bios_wr32(bios, reg, data); } - return true; + return 2; } -static bool +static int init_done(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2315,10 +2318,10 @@ init_done(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) */ /* mild retval abuse to stop parsing this table */ - return false; + return 0; } -static bool +static int init_resume(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2330,15 +2333,15 @@ init_resume(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) */ if (iexec->execute) - return true; + return 1; iexec->execute = true; BIOSLOG(bios, "0x%04X: ---- Executing following commands ----\n", offset); - return true; + return 1; } -static bool +static int init_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2353,7 +2356,7 @@ init_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) unsigned time = ROM16(bios->data[offset + 1]); if (!iexec->execute) - return true; + return 3; BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X microseconds\n", offset, time); @@ -2363,10 +2366,10 @@ init_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) else msleep((time + 900) / 1000); - return true; + return 3; } -static bool +static int init_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2383,7 +2386,7 @@ init_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t cond = bios->data[offset + 1]; if (!iexec->execute) - return true; + return 2; BIOSLOG(bios, "0x%04X: Condition: 0x%02X\n", offset, cond); @@ -2394,10 +2397,10 @@ init_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) iexec->execute = false; } - return true; + return 2; } -static bool +static int init_io_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2414,7 +2417,7 @@ init_io_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t cond = bios->data[offset + 1]; if (!iexec->execute) - return true; + return 2; BIOSLOG(bios, "0x%04X: IO condition: 0x%02X\n", offset, cond); @@ -2425,10 +2428,10 @@ init_io_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) iexec->execute = false; } - return true; + return 2; } -static bool +static int init_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2451,7 +2454,7 @@ init_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t value; if (!iexec->execute) - return true; + return 6; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, " "Data: 0x%02X\n", @@ -2460,10 +2463,10 @@ init_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) value = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) | data; bios_idxprt_wr(bios, crtcport, crtcindex, value); - return true; + return 6; } -static bool +static int init_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2481,16 +2484,16 @@ init_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint16_t freq = ROM16(bios->data[offset + 5]); if (!iexec->execute) - return true; + return 7; BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Freq: %d0kHz\n", offset, reg, freq); setPLL(bios, reg, freq * 10); - return true; + return 7; } -static bool +static int init_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2507,17 +2510,17 @@ init_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t value = ROM32(bios->data[offset + 5]); if (!iexec->execute) - return true; + return 9; if (reg == 0x000200) value |= 1; bios_wr32(bios, reg, value); - return true; + return 9; } -static bool +static int init_ram_restrict_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2543,14 +2546,15 @@ init_ram_restrict_pll(struct nvbios *bios, uint16_t offset, uint8_t type = bios->data[offset + 1]; uint32_t freq = ROM32(bios->data[offset + 2 + (index * 4)]); uint8_t *pll_limits = &bios->data[bios->pll_limit_tbl_ptr], *entry; + int len = 2 + bios->ram_restrict_group_count * 4; int i; if (!iexec->execute) - return true; + return len; if (!bios->pll_limit_tbl_ptr || (pll_limits[0] & 0xf0) != 0x30) { NV_ERROR(dev, "PLL limits table not version 3.x\n"); - return true; /* deliberate, allow default clocks to remain */ + return len; /* deliberate, allow default clocks to remain */ } entry = pll_limits + pll_limits[1]; @@ -2563,15 +2567,15 @@ init_ram_restrict_pll(struct nvbios *bios, uint16_t offset, offset, type, reg, freq); setPLL(bios, reg, freq); - return true; + return len; } } NV_ERROR(dev, "PLL type 0x%02x not found in PLL limits table", type); - return true; + return len; } -static bool +static int init_8c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2581,10 +2585,10 @@ init_8c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) * */ - return true; + return 1; } -static bool +static int init_8d(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2594,10 +2598,10 @@ init_8d(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) * */ - return true; + return 1; } -static bool +static int init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2615,14 +2619,17 @@ init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) const uint8_t *gpio_entry; int i; + if (!iexec->execute) + return 1; + if (bios->bdcb.version != 0x40) { NV_ERROR(bios->dev, "DCB table not version 4.0\n"); - return false; + return 0; } if (!bios->bdcb.gpio_table_ptr) { NV_WARN(bios->dev, "Invalid pointer to INIT_8E table\n"); - return false; + return 0; } gpio_entry = gpio_table + gpio_table[1]; @@ -2660,13 +2667,10 @@ init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) bios_wr32(bios, r, v); } - return true; + return 1; } -/* hack to avoid moving the itbl_entry array before this function */ -int init_ram_restrict_zm_reg_group_blocklen; - -static bool +static int init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2692,21 +2696,21 @@ init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset, uint8_t regincrement = bios->data[offset + 5]; uint8_t count = bios->data[offset + 6]; uint32_t strap_ramcfg, data; - uint16_t blocklen; + /* previously set by 'M' BIT table */ + uint16_t blocklen = bios->ram_restrict_group_count * 4; + int len = 7 + count * blocklen; uint8_t index; int i; - /* previously set by 'M' BIT table */ - blocklen = init_ram_restrict_zm_reg_group_blocklen; if (!iexec->execute) - return true; + return len; if (!blocklen) { NV_ERROR(bios->dev, "0x%04X: Zero block length - has the M table " "been parsed?\n", offset); - return false; + return 0; } strap_ramcfg = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 2) & 0xf; @@ -2724,10 +2728,10 @@ init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset, reg += regincrement; } - return true; + return len; } -static bool +static int init_copy_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2744,14 +2748,14 @@ init_copy_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t dstreg = ROM32(bios->data[offset + 5]); if (!iexec->execute) - return true; + return 9; bios_wr32(bios, dstreg, bios_rd32(bios, srcreg)); - return true; + return 9; } -static bool +static int init_zm_reg_group_addr_latched(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2769,20 +2773,21 @@ init_zm_reg_group_addr_latched(struct nvbios *bios, uint16_t offset, uint32_t reg = ROM32(bios->data[offset + 1]); uint8_t count = bios->data[offset + 5]; + int len = 6 + count * 4; int i; if (!iexec->execute) - return true; + return len; for (i = 0; i < count; i++) { uint32_t data = ROM32(bios->data[offset + 6 + 4 * i]); bios_wr32(bios, reg, data); } - return true; + return len; } -static bool +static int init_reserved(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2793,10 +2798,10 @@ init_reserved(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) * Seemingly does nothing */ - return true; + return 1; } -static bool +static int init_96(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2829,13 +2834,13 @@ init_96(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) val <<= bios->data[offset + 16]; if (!iexec->execute) - return true; + return 17; bios_wr32(bios, reg, (bios_rd32(bios, reg) & mask) | val); - return true; + return 17; } -static bool +static int init_97(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2859,13 +2864,13 @@ init_97(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) val = (val & mask) | ((val + add) & ~mask); if (!iexec->execute) - return true; + return 13; bios_wr32(bios, reg, val); - return true; + return 13; } -static bool +static int init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2883,32 +2888,33 @@ init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) struct drm_device *dev = bios->dev; struct nouveau_i2c_chan *auxch; uint32_t addr = ROM32(bios->data[offset + 1]); - uint8_t len = bios->data[offset + 5]; + uint8_t count = bios->data[offset + 5]; + int len = 6 + count * 2; int ret, i; if (!bios->display.output) { NV_ERROR(dev, "INIT_AUXCH: no active output\n"); - return false; + return 0; } auxch = init_i2c_device_find(dev, bios->display.output->i2c_index); if (!auxch) { NV_ERROR(dev, "INIT_AUXCH: couldn't get auxch %d\n", bios->display.output->i2c_index); - return false; + return 0; } if (!iexec->execute) - return true; + return len; offset += 6; - for (i = 0; i < len; i++, offset += 2) { + for (i = 0; i < count; i++, offset += 2) { uint8_t data; ret = nouveau_dp_auxch(auxch, 9, addr, &data, 1); if (ret) { NV_ERROR(dev, "INIT_AUXCH: rd auxch fail %d\n", ret); - return false; + return 0; } data &= bios->data[offset + 0]; @@ -2917,14 +2923,14 @@ init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) ret = nouveau_dp_auxch(auxch, 8, addr, &data, 1); if (ret) { NV_ERROR(dev, "INIT_AUXCH: wr auxch fail %d\n", ret); - return false; + return 0; } } - return true; + return len; } -static bool +static int init_zm_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2941,106 +2947,99 @@ init_zm_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) struct drm_device *dev = bios->dev; struct nouveau_i2c_chan *auxch; uint32_t addr = ROM32(bios->data[offset + 1]); - uint8_t len = bios->data[offset + 5]; + uint8_t count = bios->data[offset + 5]; + int len = 6 + count; int ret, i; if (!bios->display.output) { NV_ERROR(dev, "INIT_ZM_AUXCH: no active output\n"); - return false; + return 0; } auxch = init_i2c_device_find(dev, bios->display.output->i2c_index); if (!auxch) { NV_ERROR(dev, "INIT_ZM_AUXCH: couldn't get auxch %d\n", bios->display.output->i2c_index); - return false; + return 0; } if (!iexec->execute) - return true; + return len; offset += 6; - for (i = 0; i < len; i++, offset++) { + for (i = 0; i < count; i++, offset++) { ret = nouveau_dp_auxch(auxch, 8, addr, &bios->data[offset], 1); if (ret) { NV_ERROR(dev, "INIT_ZM_AUXCH: wr auxch fail %d\n", ret); - return false; + return 0; } } - return true; + return len; } static struct init_tbl_entry itbl_entry[] = { /* command name , id , length , offset , mult , command handler */ /* INIT_PROG (0x31, 15, 10, 4) removed due to no example of use */ - { "INIT_IO_RESTRICT_PROG" , 0x32, 11 , 6 , 4 , init_io_restrict_prog }, - { "INIT_REPEAT" , 0x33, 2 , 0 , 0 , init_repeat }, - { "INIT_IO_RESTRICT_PLL" , 0x34, 12 , 7 , 2 , init_io_restrict_pll }, - { "INIT_END_REPEAT" , 0x36, 1 , 0 , 0 , init_end_repeat }, - { "INIT_COPY" , 0x37, 11 , 0 , 0 , init_copy }, - { "INIT_NOT" , 0x38, 1 , 0 , 0 , init_not }, - { "INIT_IO_FLAG_CONDITION" , 0x39, 2 , 0 , 0 , init_io_flag_condition }, - { "INIT_INDEX_ADDRESS_LATCHED" , 0x49, 18 , 17 , 2 , init_idx_addr_latched }, - { "INIT_IO_RESTRICT_PLL2" , 0x4A, 11 , 6 , 4 , init_io_restrict_pll2 }, - { "INIT_PLL2" , 0x4B, 9 , 0 , 0 , init_pll2 }, - { "INIT_I2C_BYTE" , 0x4C, 4 , 3 , 3 , init_i2c_byte }, - { "INIT_ZM_I2C_BYTE" , 0x4D, 4 , 3 , 2 , init_zm_i2c_byte }, - { "INIT_ZM_I2C" , 0x4E, 4 , 3 , 1 , init_zm_i2c }, - { "INIT_TMDS" , 0x4F, 5 , 0 , 0 , init_tmds }, - { "INIT_ZM_TMDS_GROUP" , 0x50, 3 , 2 , 2 , init_zm_tmds_group }, - { "INIT_CR_INDEX_ADDRESS_LATCHED" , 0x51, 5 , 4 , 1 , init_cr_idx_adr_latch }, - { "INIT_CR" , 0x52, 4 , 0 , 0 , init_cr }, - { "INIT_ZM_CR" , 0x53, 3 , 0 , 0 , init_zm_cr }, - { "INIT_ZM_CR_GROUP" , 0x54, 2 , 1 , 2 , init_zm_cr_group }, - { "INIT_CONDITION_TIME" , 0x56, 3 , 0 , 0 , init_condition_time }, - { "INIT_ZM_REG_SEQUENCE" , 0x58, 6 , 5 , 4 , init_zm_reg_sequence }, + { "INIT_IO_RESTRICT_PROG" , 0x32, init_io_restrict_prog }, + { "INIT_REPEAT" , 0x33, init_repeat }, + { "INIT_IO_RESTRICT_PLL" , 0x34, init_io_restrict_pll }, + { "INIT_END_REPEAT" , 0x36, init_end_repeat }, + { "INIT_COPY" , 0x37, init_copy }, + { "INIT_NOT" , 0x38, init_not }, + { "INIT_IO_FLAG_CONDITION" , 0x39, init_io_flag_condition }, + { "INIT_INDEX_ADDRESS_LATCHED" , 0x49, init_idx_addr_latched }, + { "INIT_IO_RESTRICT_PLL2" , 0x4A, init_io_restrict_pll2 }, + { "INIT_PLL2" , 0x4B, init_pll2 }, + { "INIT_I2C_BYTE" , 0x4C, init_i2c_byte }, + { "INIT_ZM_I2C_BYTE" , 0x4D, init_zm_i2c_byte }, + { "INIT_ZM_I2C" , 0x4E, init_zm_i2c }, + { "INIT_TMDS" , 0x4F, init_tmds }, + { "INIT_ZM_TMDS_GROUP" , 0x50, init_zm_tmds_group }, + { "INIT_CR_INDEX_ADDRESS_LATCHED" , 0x51, init_cr_idx_adr_latch }, + { "INIT_CR" , 0x52, init_cr }, + { "INIT_ZM_CR" , 0x53, init_zm_cr }, + { "INIT_ZM_CR_GROUP" , 0x54, init_zm_cr_group }, + { "INIT_CONDITION_TIME" , 0x56, init_condition_time }, + { "INIT_ZM_REG_SEQUENCE" , 0x58, init_zm_reg_sequence }, /* INIT_INDIRECT_REG (0x5A, 7, 0, 0) removed due to no example of use */ - { "INIT_SUB_DIRECT" , 0x5B, 3 , 0 , 0 , init_sub_direct }, - { "INIT_COPY_NV_REG" , 0x5F, 22 , 0 , 0 , init_copy_nv_reg }, - { "INIT_ZM_INDEX_IO" , 0x62, 5 , 0 , 0 , init_zm_index_io }, - { "INIT_COMPUTE_MEM" , 0x63, 1 , 0 , 0 , init_compute_mem }, - { "INIT_RESET" , 0x65, 13 , 0 , 0 , init_reset }, - { "INIT_CONFIGURE_MEM" , 0x66, 1 , 0 , 0 , init_configure_mem }, - { "INIT_CONFIGURE_CLK" , 0x67, 1 , 0 , 0 , init_configure_clk }, - { "INIT_CONFIGURE_PREINIT" , 0x68, 1 , 0 , 0 , init_configure_preinit }, - { "INIT_IO" , 0x69, 5 , 0 , 0 , init_io }, - { "INIT_SUB" , 0x6B, 2 , 0 , 0 , init_sub }, - { "INIT_RAM_CONDITION" , 0x6D, 3 , 0 , 0 , init_ram_condition }, - { "INIT_NV_REG" , 0x6E, 13 , 0 , 0 , init_nv_reg }, - { "INIT_MACRO" , 0x6F, 2 , 0 , 0 , init_macro }, - { "INIT_DONE" , 0x71, 1 , 0 , 0 , init_done }, - { "INIT_RESUME" , 0x72, 1 , 0 , 0 , init_resume }, + { "INIT_SUB_DIRECT" , 0x5B, init_sub_direct }, + { "INIT_COPY_NV_REG" , 0x5F, init_copy_nv_reg }, + { "INIT_ZM_INDEX_IO" , 0x62, init_zm_index_io }, + { "INIT_COMPUTE_MEM" , 0x63, init_compute_mem }, + { "INIT_RESET" , 0x65, init_reset }, + { "INIT_CONFIGURE_MEM" , 0x66, init_configure_mem }, + { "INIT_CONFIGURE_CLK" , 0x67, init_configure_clk }, + { "INIT_CONFIGURE_PREINIT" , 0x68, init_configure_preinit }, + { "INIT_IO" , 0x69, init_io }, + { "INIT_SUB" , 0x6B, init_sub }, + { "INIT_RAM_CONDITION" , 0x6D, init_ram_condition }, + { "INIT_NV_REG" , 0x6E, init_nv_reg }, + { "INIT_MACRO" , 0x6F, init_macro }, + { "INIT_DONE" , 0x71, init_done }, + { "INIT_RESUME" , 0x72, init_resume }, /* INIT_RAM_CONDITION2 (0x73, 9, 0, 0) removed due to no example of use */ - { "INIT_TIME" , 0x74, 3 , 0 , 0 , init_time }, - { "INIT_CONDITION" , 0x75, 2 , 0 , 0 , init_condition }, - { "INIT_IO_CONDITION" , 0x76, 2 , 0 , 0 , init_io_condition }, - { "INIT_INDEX_IO" , 0x78, 6 , 0 , 0 , init_index_io }, - { "INIT_PLL" , 0x79, 7 , 0 , 0 , init_pll }, - { "INIT_ZM_REG" , 0x7A, 9 , 0 , 0 , init_zm_reg }, - /* INIT_RAM_RESTRICT_PLL's length is adjusted by the BIT M table */ - { "INIT_RAM_RESTRICT_PLL" , 0x87, 2 , 0 , 0 , init_ram_restrict_pll }, - { "INIT_8C" , 0x8C, 1 , 0 , 0 , init_8c }, - { "INIT_8D" , 0x8D, 1 , 0 , 0 , init_8d }, - { "INIT_GPIO" , 0x8E, 1 , 0 , 0 , init_gpio }, - /* INIT_RAM_RESTRICT_ZM_REG_GROUP's mult is loaded by M table in BIT */ - { "INIT_RAM_RESTRICT_ZM_REG_GROUP" , 0x8F, 7 , 6 , 0 , init_ram_restrict_zm_reg_group }, - { "INIT_COPY_ZM_REG" , 0x90, 9 , 0 , 0 , init_copy_zm_reg }, - { "INIT_ZM_REG_GROUP_ADDRESS_LATCHED" , 0x91, 6 , 5 , 4 , init_zm_reg_group_addr_latched }, - { "INIT_RESERVED" , 0x92, 1 , 0 , 0 , init_reserved }, - { "INIT_96" , 0x96, 17 , 0 , 0 , init_96 }, - { "INIT_97" , 0x97, 13 , 0 , 0 , init_97 }, - { "INIT_AUXCH" , 0x98, 6 , 5 , 2 , init_auxch }, - { "INIT_ZM_AUXCH" , 0x99, 6 , 5 , 1 , init_zm_auxch }, - { NULL , 0 , 0 , 0 , 0 , NULL } + { "INIT_TIME" , 0x74, init_time }, + { "INIT_CONDITION" , 0x75, init_condition }, + { "INIT_IO_CONDITION" , 0x76, init_io_condition }, + { "INIT_INDEX_IO" , 0x78, init_index_io }, + { "INIT_PLL" , 0x79, init_pll }, + { "INIT_ZM_REG" , 0x7A, init_zm_reg }, + { "INIT_RAM_RESTRICT_PLL" , 0x87, init_ram_restrict_pll }, + { "INIT_8C" , 0x8C, init_8c }, + { "INIT_8D" , 0x8D, init_8d }, + { "INIT_GPIO" , 0x8E, init_gpio }, + { "INIT_RAM_RESTRICT_ZM_REG_GROUP" , 0x8F, init_ram_restrict_zm_reg_group }, + { "INIT_COPY_ZM_REG" , 0x90, init_copy_zm_reg }, + { "INIT_ZM_REG_GROUP_ADDRESS_LATCHED" , 0x91, init_zm_reg_group_addr_latched }, + { "INIT_RESERVED" , 0x92, init_reserved }, + { "INIT_96" , 0x96, init_96 }, + { "INIT_97" , 0x97, init_97 }, + { "INIT_AUXCH" , 0x98, init_auxch }, + { "INIT_ZM_AUXCH" , 0x99, init_zm_auxch }, + { NULL , 0 , NULL } }; -static unsigned int get_init_table_entry_length(struct nvbios *bios, unsigned int offset, int i) -{ - /* Calculates the length of a given init table entry. */ - return itbl_entry[i].length + bios->data[offset + itbl_entry[i].length_offset]*itbl_entry[i].length_multiplier; -} - #define MAX_TABLE_OPS 1000 static int @@ -3056,7 +3055,7 @@ parse_init_table(struct nvbios *bios, unsigned int offset, * is changed back to EXECUTE. */ - int count = 0, i; + int count = 0, i, res; uint8_t id; /* @@ -3076,22 +3075,21 @@ parse_init_table(struct nvbios *bios, unsigned int offset, offset, itbl_entry[i].id, itbl_entry[i].name); /* execute eventual command handler */ - if (itbl_entry[i].handler) - if (!(*itbl_entry[i].handler)(bios, offset, iexec)) - break; + res = (*itbl_entry[i].handler)(bios, offset, iexec); + if (!res) + break; + /* + * Add the offset of the current command including all data + * of that command. The offset will then be pointing on the + * next op code. + */ + offset += res; } else { NV_ERROR(bios->dev, "0x%04X: Init table command not found: " "0x%02X\n", offset, id); return -ENOENT; } - - /* - * Add the offset of the current command including all data - * of that command. The offset will then be pointing on the - * next op code. - */ - offset += get_init_table_entry_length(bios, offset, i); } if (offset >= bios->length) @@ -3854,7 +3852,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, * script tables is a pointer to the script to execute. */ - NV_DEBUG(dev, "Searching for output entry for %d %d %d\n", + NV_DEBUG_KMS(dev, "Searching for output entry for %d %d %d\n", dcbent->type, dcbent->location, dcbent->or); otable = bios_output_config_match(dev, dcbent, table[1] + bios->display.script_table_ptr, @@ -3884,7 +3882,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, if (pxclk == 0) { script = ROM16(otable[6]); if (!script) { - NV_DEBUG(dev, "output script 0 not found\n"); + NV_DEBUG_KMS(dev, "output script 0 not found\n"); return 1; } @@ -3894,7 +3892,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, if (pxclk == -1) { script = ROM16(otable[8]); if (!script) { - NV_DEBUG(dev, "output script 1 not found\n"); + NV_DEBUG_KMS(dev, "output script 1 not found\n"); return 1; } @@ -3907,7 +3905,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, else script = 0; if (!script) { - NV_DEBUG(dev, "output script 2 not found\n"); + NV_DEBUG_KMS(dev, "output script 2 not found\n"); return 1; } @@ -3931,7 +3929,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, if (script) script = clkcmptable(bios, script, -pxclk); if (!script) { - NV_DEBUG(dev, "clock script 1 not found\n"); + NV_DEBUG_KMS(dev, "clock script 1 not found\n"); return 1; } @@ -4606,10 +4604,6 @@ parse_bit_M_tbl_entry(struct drm_device *dev, struct nvbios *bios, * stuff that we don't use - their use currently unknown */ - uint16_t rr_strap_xlat; - uint8_t rr_group_count; - int i; - /* * Older bios versions don't have a sufficiently long table for * what we want @@ -4618,24 +4612,13 @@ parse_bit_M_tbl_entry(struct drm_device *dev, struct nvbios *bios, return 0; if (bitentry->id[1] < 2) { - rr_group_count = bios->data[bitentry->offset + 2]; - rr_strap_xlat = ROM16(bios->data[bitentry->offset + 3]); + bios->ram_restrict_group_count = bios->data[bitentry->offset + 2]; + bios->ram_restrict_tbl_ptr = ROM16(bios->data[bitentry->offset + 3]); } else { - rr_group_count = bios->data[bitentry->offset + 0]; - rr_strap_xlat = ROM16(bios->data[bitentry->offset + 1]); + bios->ram_restrict_group_count = bios->data[bitentry->offset + 0]; + bios->ram_restrict_tbl_ptr = ROM16(bios->data[bitentry->offset + 1]); } - /* adjust length of INIT_87 */ - for (i = 0; itbl_entry[i].name && (itbl_entry[i].id != 0x87); i++); - itbl_entry[i].length += rr_group_count * 4; - - /* set up multiplier for INIT_RAM_RESTRICT_ZM_REG_GROUP */ - for (; itbl_entry[i].name && (itbl_entry[i].id != 0x8f); i++); - itbl_entry[i].length_multiplier = rr_group_count * 4; - - init_ram_restrict_zm_reg_group_blocklen = itbl_entry[i].length_multiplier; - bios->ram_restrict_tbl_ptr = rr_strap_xlat; - return 0; } @@ -5234,7 +5217,7 @@ parse_dcb_connector_table(struct nvbios *bios) int i; if (!bios->bdcb.connector_table_ptr) { - NV_DEBUG(dev, "No DCB connector table present\n"); + NV_DEBUG_KMS(dev, "No DCB connector table present\n"); return; } diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.h b/drivers/gpu/drm/nouveau/nouveau_bios.h index 1d5f10bd78e..058e98c76d8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.h +++ b/drivers/gpu/drm/nouveau/nouveau_bios.h @@ -227,6 +227,7 @@ struct nvbios { uint16_t pll_limit_tbl_ptr; uint16_t ram_restrict_tbl_ptr; + uint8_t ram_restrict_group_count; uint16_t some_script_ptr; /* BIT I + 14 */ uint16_t init96_tbl_ptr; /* BIT I + 16 */ diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index aa2dfbc3e35..0cad6d834eb 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -154,6 +154,11 @@ nouveau_bo_placement_set(struct nouveau_bo *nvbo, uint32_t memtype) nvbo->placement.busy_placement = nvbo->placements; nvbo->placement.num_placement = n; nvbo->placement.num_busy_placement = n; + + if (nvbo->pin_refcnt) { + while (n--) + nvbo->placements[n] |= TTM_PL_FLAG_NO_EVICT; + } } int @@ -400,10 +405,16 @@ nouveau_bo_evict_flags(struct ttm_buffer_object *bo, struct ttm_placement *pl) struct nouveau_bo *nvbo = nouveau_bo(bo); switch (bo->mem.mem_type) { + case TTM_PL_VRAM: + nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_TT | + TTM_PL_FLAG_SYSTEM); + break; default: nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_SYSTEM); break; } + + *pl = nvbo->placement; } @@ -455,11 +466,8 @@ nouveau_bo_move_m2mf(struct ttm_buffer_object *bo, int evict, int no_wait, int ret; chan = nvbo->channel; - if (!chan || nvbo->tile_flags || nvbo->no_vm) { + if (!chan || nvbo->tile_flags || nvbo->no_vm) chan = dev_priv->channel; - if (!chan) - return -EINVAL; - } src_offset = old_mem->mm_node->start << PAGE_SHIFT; dst_offset = new_mem->mm_node->start << PAGE_SHIFT; @@ -625,7 +633,8 @@ nouveau_bo_move(struct ttm_buffer_object *bo, bool evict, bool intr, return ret; } - if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE) + if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE || + !dev_priv->channel) return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); if (old_mem->mem_type == TTM_PL_SYSTEM && !bo->ttm) { diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 032cf098fa1..5a10deb8bdb 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -86,7 +86,7 @@ nouveau_connector_destroy(struct drm_connector *drm_connector) struct nouveau_connector *connector = nouveau_connector(drm_connector); struct drm_device *dev = connector->base.dev; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (!connector) return; @@ -420,7 +420,7 @@ nouveau_connector_native_mode(struct nouveau_connector *connector) /* Use preferred mode if there is one.. */ list_for_each_entry(mode, &connector->base.probed_modes, head) { if (mode->type & DRM_MODE_TYPE_PREFERRED) { - NV_DEBUG(dev, "native mode from preferred\n"); + NV_DEBUG_KMS(dev, "native mode from preferred\n"); return drm_mode_duplicate(dev, mode); } } @@ -445,7 +445,7 @@ nouveau_connector_native_mode(struct nouveau_connector *connector) largest = mode; } - NV_DEBUG(dev, "native mode from largest: %dx%d@%d\n", + NV_DEBUG_KMS(dev, "native mode from largest: %dx%d@%d\n", high_w, high_h, high_v); return largest ? drm_mode_duplicate(dev, largest) : NULL; } @@ -725,7 +725,7 @@ nouveau_connector_create(struct drm_device *dev, int index, int type) struct drm_encoder *encoder; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL); if (!nv_connector) diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c index de61f4640e1..9e2926c4857 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dp.c +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c @@ -187,7 +187,7 @@ nouveau_dp_link_train_adjust(struct drm_encoder *encoder, uint8_t *config) if (ret) return false; - NV_DEBUG(dev, "\t\tadjust 0x%02x 0x%02x\n", request[0], request[1]); + NV_DEBUG_KMS(dev, "\t\tadjust 0x%02x 0x%02x\n", request[0], request[1]); /* Keep all lanes at the same level.. */ for (i = 0; i < nv_encoder->dp.link_nr; i++) { @@ -228,7 +228,7 @@ nouveau_dp_link_train_commit(struct drm_encoder *encoder, uint8_t *config) int or = nv_encoder->or, link = !(nv_encoder->dcb->sorconf.link & 1); int dpe_headerlen, ret, i; - NV_DEBUG(dev, "\t\tconfig 0x%02x 0x%02x 0x%02x 0x%02x\n", + NV_DEBUG_KMS(dev, "\t\tconfig 0x%02x 0x%02x 0x%02x 0x%02x\n", config[0], config[1], config[2], config[3]); dpe = nouveau_bios_dp_table(dev, nv_encoder->dcb, &dpe_headerlen); @@ -276,12 +276,12 @@ nouveau_dp_link_train(struct drm_encoder *encoder) bool cr_done, cr_max_vs, eq_done; int ret = 0, i, tries, voltage; - NV_DEBUG(dev, "link training!!\n"); + NV_DEBUG_KMS(dev, "link training!!\n"); train: cr_done = eq_done = false; /* set link configuration */ - NV_DEBUG(dev, "\tbegin train: bw %d, lanes %d\n", + NV_DEBUG_KMS(dev, "\tbegin train: bw %d, lanes %d\n", nv_encoder->dp.link_bw, nv_encoder->dp.link_nr); ret = nouveau_dp_link_bw_set(encoder, nv_encoder->dp.link_bw); @@ -297,7 +297,7 @@ train: return false; /* clock recovery */ - NV_DEBUG(dev, "\tbegin cr\n"); + NV_DEBUG_KMS(dev, "\tbegin cr\n"); ret = nouveau_dp_link_train_set(encoder, DP_TRAINING_PATTERN_1); if (ret) goto stop; @@ -314,7 +314,7 @@ train: ret = auxch_rd(encoder, DP_LANE0_1_STATUS, status, 2); if (ret) break; - NV_DEBUG(dev, "\t\tstatus: 0x%02x 0x%02x\n", + NV_DEBUG_KMS(dev, "\t\tstatus: 0x%02x 0x%02x\n", status[0], status[1]); cr_done = true; @@ -346,7 +346,7 @@ train: goto stop; /* channel equalisation */ - NV_DEBUG(dev, "\tbegin eq\n"); + NV_DEBUG_KMS(dev, "\tbegin eq\n"); ret = nouveau_dp_link_train_set(encoder, DP_TRAINING_PATTERN_2); if (ret) goto stop; @@ -357,7 +357,7 @@ train: ret = auxch_rd(encoder, DP_LANE0_1_STATUS, status, 3); if (ret) break; - NV_DEBUG(dev, "\t\tstatus: 0x%02x 0x%02x\n", + NV_DEBUG_KMS(dev, "\t\tstatus: 0x%02x 0x%02x\n", status[0], status[1]); eq_done = true; @@ -395,9 +395,9 @@ stop: /* retry at a lower setting, if possible */ if (!ret && !(eq_done && cr_done)) { - NV_DEBUG(dev, "\twe failed\n"); + NV_DEBUG_KMS(dev, "\twe failed\n"); if (nv_encoder->dp.link_bw != DP_LINK_BW_1_62) { - NV_DEBUG(dev, "retry link training at low rate\n"); + NV_DEBUG_KMS(dev, "retry link training at low rate\n"); nv_encoder->dp.link_bw = DP_LINK_BW_1_62; goto train; } @@ -418,7 +418,7 @@ nouveau_dp_detect(struct drm_encoder *encoder) if (ret) return false; - NV_DEBUG(dev, "encoder: link_bw %d, link_nr %d\n" + NV_DEBUG_KMS(dev, "encoder: link_bw %d, link_nr %d\n" "display: link_bw %d, link_nr %d version 0x%02x\n", nv_encoder->dcb->dpconf.link_bw, nv_encoder->dcb->dpconf.link_nr, @@ -446,7 +446,7 @@ nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr, uint32_t tmp, ctrl, stat = 0, data32[4] = {}; int ret = 0, i, index = auxch->rd; - NV_DEBUG(dev, "ch %d cmd %d addr 0x%x len %d\n", index, cmd, addr, data_nr); + NV_DEBUG_KMS(dev, "ch %d cmd %d addr 0x%x len %d\n", index, cmd, addr, data_nr); tmp = nv_rd32(dev, NV50_AUXCH_CTRL(auxch->rd)); nv_wr32(dev, NV50_AUXCH_CTRL(auxch->rd), tmp | 0x00100000); @@ -472,7 +472,7 @@ nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr, if (!(cmd & 1)) { memcpy(data32, data, data_nr); for (i = 0; i < 4; i++) { - NV_DEBUG(dev, "wr %d: 0x%08x\n", i, data32[i]); + NV_DEBUG_KMS(dev, "wr %d: 0x%08x\n", i, data32[i]); nv_wr32(dev, NV50_AUXCH_DATA_OUT(index, i), data32[i]); } } @@ -504,7 +504,7 @@ nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr, if (cmd & 1) { for (i = 0; i < 4; i++) { data32[i] = nv_rd32(dev, NV50_AUXCH_DATA_IN(index, i)); - NV_DEBUG(dev, "rd %d: 0x%08x\n", i, data32[i]); + NV_DEBUG_KMS(dev, "rd %d: 0x%08x\n", i, data32[i]); } memcpy(data, data32, data_nr); } diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index 35249c35118..06eb993e088 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -35,6 +35,10 @@ #include "drm_pciids.h" +MODULE_PARM_DESC(ctxfw, "Use external firmware blob for grctx init (NV40)"); +int nouveau_ctxfw = 0; +module_param_named(ctxfw, nouveau_ctxfw, int, 0400); + MODULE_PARM_DESC(noagp, "Disable AGP"); int nouveau_noagp; module_param_named(noagp, nouveau_noagp, int, 0400); @@ -273,7 +277,7 @@ nouveau_pci_resume(struct pci_dev *pdev) for (i = 0; i < dev_priv->engine.fifo.channels; i++) { chan = dev_priv->fifos[i]; - if (!chan) + if (!chan || !chan->pushbuf_bo) continue; for (j = 0; j < NOUVEAU_DMA_SKIPS; j++) @@ -341,7 +345,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = nouveau_ttm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 88b4c7b77e7..5f8cbb79c49 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -54,6 +54,7 @@ struct nouveau_fpriv { #include "nouveau_drm.h" #include "nouveau_reg.h" #include "nouveau_bios.h" +struct nouveau_grctx; #define MAX_NUM_DCB_ENTRIES 16 @@ -317,6 +318,7 @@ struct nouveau_pgraph_engine { bool accel_blocked; void *ctxprog; void *ctxvals; + int grctx_size; int (*init)(struct drm_device *); void (*takedown)(struct drm_device *); @@ -647,6 +649,7 @@ extern int nouveau_fbpercrtc; extern char *nouveau_tv_norm; extern int nouveau_reg_debug; extern char *nouveau_vbios; +extern int nouveau_ctxfw; /* nouveau_state.c */ extern void nouveau_preclose(struct drm_device *dev, struct drm_file *); @@ -959,9 +962,7 @@ extern int nv40_graph_create_context(struct nouveau_channel *); extern void nv40_graph_destroy_context(struct nouveau_channel *); extern int nv40_graph_load_context(struct nouveau_channel *); extern int nv40_graph_unload_context(struct drm_device *); -extern int nv40_grctx_init(struct drm_device *); -extern void nv40_grctx_fini(struct drm_device *); -extern void nv40_grctx_vals_load(struct drm_device *, struct nouveau_gpuobj *); +extern void nv40_grctx_init(struct nouveau_grctx *); /* nv50_graph.c */ extern struct nouveau_pgraph_object_class nv50_graph_grclass[]; @@ -975,6 +976,12 @@ extern int nv50_graph_load_context(struct nouveau_channel *); extern int nv50_graph_unload_context(struct drm_device *); extern void nv50_graph_context_switch(struct drm_device *); +/* nouveau_grctx.c */ +extern int nouveau_grctx_prog_load(struct drm_device *); +extern void nouveau_grctx_vals_load(struct drm_device *, + struct nouveau_gpuobj *); +extern void nouveau_grctx_fini(struct drm_device *); + /* nv04_instmem.c */ extern int nv04_instmem_init(struct drm_device *); extern void nv04_instmem_takedown(struct drm_device *); @@ -1207,14 +1214,24 @@ static inline void nv_wo32(struct drm_device *dev, struct nouveau_gpuobj *obj, pci_name(d->pdev), ##arg) #ifndef NV_DEBUG_NOTRACE #define NV_DEBUG(d, fmt, arg...) do { \ - if (drm_debug) { \ + if (drm_debug & DRM_UT_DRIVER) { \ + NV_PRINTK(KERN_DEBUG, d, "%s:%d - " fmt, __func__, \ + __LINE__, ##arg); \ + } \ +} while (0) +#define NV_DEBUG_KMS(d, fmt, arg...) do { \ + if (drm_debug & DRM_UT_KMS) { \ NV_PRINTK(KERN_DEBUG, d, "%s:%d - " fmt, __func__, \ __LINE__, ##arg); \ } \ } while (0) #else #define NV_DEBUG(d, fmt, arg...) do { \ - if (drm_debug) \ + if (drm_debug & DRM_UT_DRIVER) \ + NV_PRINTK(KERN_DEBUG, d, fmt, ##arg); \ +} while (0) +#define NV_DEBUG_KMS(d, fmt, arg...) do { \ + if (drm_debug & DRM_UT_KMS) \ NV_PRINTK(KERN_DEBUG, d, fmt, ##arg); \ } while (0) #endif diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 36e8c5e4503..84af25c238b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -58,7 +58,7 @@ nouveau_fbcon_sync(struct fb_info *info) struct nouveau_channel *chan = dev_priv->channel; int ret, i; - if (!chan->accel_done || + if (!chan || !chan->accel_done || info->state != FBINFO_STATE_RUNNING || info->flags & FBINFO_HWACCEL_DISABLED) return 0; @@ -318,14 +318,16 @@ nouveau_fbcon_create(struct drm_device *dev, uint32_t fb_width, par->nouveau_fb = nouveau_fb; par->dev = dev; - switch (dev_priv->card_type) { - case NV_50: - nv50_fbcon_accel_init(info); - break; - default: - nv04_fbcon_accel_init(info); - break; - }; + if (dev_priv->channel) { + switch (dev_priv->card_type) { + case NV_50: + nv50_fbcon_accel_init(info); + break; + default: + nv04_fbcon_accel_init(info); + break; + }; + } nouveau_fbcon_zfill(dev); @@ -347,7 +349,7 @@ out: int nouveau_fbcon_probe(struct drm_device *dev) { - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); return drm_fb_helper_single_fb_probe(dev, 32, nouveau_fbcon_create); } diff --git a/drivers/gpu/drm/nouveau/nouveau_grctx.c b/drivers/gpu/drm/nouveau/nouveau_grctx.c new file mode 100644 index 00000000000..419f4c2b3b8 --- /dev/null +++ b/drivers/gpu/drm/nouveau/nouveau_grctx.c @@ -0,0 +1,161 @@ +/* + * Copyright 2009 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Ben Skeggs + */ + +#include <linux/firmware.h> + +#include "drmP.h" +#include "nouveau_drv.h" + +struct nouveau_ctxprog { + uint32_t signature; + uint8_t version; + uint16_t length; + uint32_t data[]; +} __attribute__ ((packed)); + +struct nouveau_ctxvals { + uint32_t signature; + uint8_t version; + uint32_t length; + struct { + uint32_t offset; + uint32_t value; + } data[]; +} __attribute__ ((packed)); + +int +nouveau_grctx_prog_load(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + const int chipset = dev_priv->chipset; + const struct firmware *fw; + const struct nouveau_ctxprog *cp; + const struct nouveau_ctxvals *cv; + char name[32]; + int ret, i; + + if (pgraph->accel_blocked) + return -ENODEV; + + if (!pgraph->ctxprog) { + sprintf(name, "nouveau/nv%02x.ctxprog", chipset); + ret = request_firmware(&fw, name, &dev->pdev->dev); + if (ret) { + NV_ERROR(dev, "No ctxprog for NV%02x\n", chipset); + return ret; + } + + pgraph->ctxprog = kmalloc(fw->size, GFP_KERNEL); + if (!pgraph->ctxprog) { + NV_ERROR(dev, "OOM copying ctxprog\n"); + release_firmware(fw); + return -ENOMEM; + } + memcpy(pgraph->ctxprog, fw->data, fw->size); + + cp = pgraph->ctxprog; + if (le32_to_cpu(cp->signature) != 0x5043564e || + cp->version != 0 || + le16_to_cpu(cp->length) != ((fw->size - 7) / 4)) { + NV_ERROR(dev, "ctxprog invalid\n"); + release_firmware(fw); + nouveau_grctx_fini(dev); + return -EINVAL; + } + release_firmware(fw); + } + + if (!pgraph->ctxvals) { + sprintf(name, "nouveau/nv%02x.ctxvals", chipset); + ret = request_firmware(&fw, name, &dev->pdev->dev); + if (ret) { + NV_ERROR(dev, "No ctxvals for NV%02x\n", chipset); + nouveau_grctx_fini(dev); + return ret; + } + + pgraph->ctxvals = kmalloc(fw->size, GFP_KERNEL); + if (!pgraph->ctxprog) { + NV_ERROR(dev, "OOM copying ctxprog\n"); + release_firmware(fw); + nouveau_grctx_fini(dev); + return -ENOMEM; + } + memcpy(pgraph->ctxvals, fw->data, fw->size); + + cv = (void *)pgraph->ctxvals; + if (le32_to_cpu(cv->signature) != 0x5643564e || + cv->version != 0 || + le32_to_cpu(cv->length) != ((fw->size - 9) / 8)) { + NV_ERROR(dev, "ctxvals invalid\n"); + release_firmware(fw); + nouveau_grctx_fini(dev); + return -EINVAL; + } + release_firmware(fw); + } + + cp = pgraph->ctxprog; + + nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0); + for (i = 0; i < le16_to_cpu(cp->length); i++) + nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, + le32_to_cpu(cp->data[i])); + + return 0; +} + +void +nouveau_grctx_fini(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + + if (pgraph->ctxprog) { + kfree(pgraph->ctxprog); + pgraph->ctxprog = NULL; + } + + if (pgraph->ctxvals) { + kfree(pgraph->ctxprog); + pgraph->ctxvals = NULL; + } +} + +void +nouveau_grctx_vals_load(struct drm_device *dev, struct nouveau_gpuobj *ctx) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + struct nouveau_ctxvals *cv = pgraph->ctxvals; + int i; + + if (!cv) + return; + + for (i = 0; i < le32_to_cpu(cv->length); i++) + nv_wo32(dev, ctx, le32_to_cpu(cv->data[i].offset), + le32_to_cpu(cv->data[i].value)); +} diff --git a/drivers/gpu/drm/nouveau/nouveau_grctx.h b/drivers/gpu/drm/nouveau/nouveau_grctx.h new file mode 100644 index 00000000000..5d39c4ce800 --- /dev/null +++ b/drivers/gpu/drm/nouveau/nouveau_grctx.h @@ -0,0 +1,133 @@ +#ifndef __NOUVEAU_GRCTX_H__ +#define __NOUVEAU_GRCTX_H__ + +struct nouveau_grctx { + struct drm_device *dev; + + enum { + NOUVEAU_GRCTX_PROG, + NOUVEAU_GRCTX_VALS + } mode; + void *data; + + uint32_t ctxprog_max; + uint32_t ctxprog_len; + uint32_t ctxprog_reg; + int ctxprog_label[32]; + uint32_t ctxvals_pos; + uint32_t ctxvals_base; +}; + +#ifdef CP_CTX +static inline void +cp_out(struct nouveau_grctx *ctx, uint32_t inst) +{ + uint32_t *ctxprog = ctx->data; + + if (ctx->mode != NOUVEAU_GRCTX_PROG) + return; + + BUG_ON(ctx->ctxprog_len == ctx->ctxprog_max); + ctxprog[ctx->ctxprog_len++] = inst; +} + +static inline void +cp_lsr(struct nouveau_grctx *ctx, uint32_t val) +{ + cp_out(ctx, CP_LOAD_SR | val); +} + +static inline void +cp_ctx(struct nouveau_grctx *ctx, uint32_t reg, uint32_t length) +{ + ctx->ctxprog_reg = (reg - 0x00400000) >> 2; + + ctx->ctxvals_base = ctx->ctxvals_pos; + ctx->ctxvals_pos = ctx->ctxvals_base + length; + + if (length > (CP_CTX_COUNT >> CP_CTX_COUNT_SHIFT)) { + cp_lsr(ctx, length); + length = 0; + } + + cp_out(ctx, CP_CTX | (length << CP_CTX_COUNT_SHIFT) | ctx->ctxprog_reg); +} + +static inline void +cp_name(struct nouveau_grctx *ctx, int name) +{ + uint32_t *ctxprog = ctx->data; + int i; + + if (ctx->mode != NOUVEAU_GRCTX_PROG) + return; + + ctx->ctxprog_label[name] = ctx->ctxprog_len; + for (i = 0; i < ctx->ctxprog_len; i++) { + if ((ctxprog[i] & 0xfff00000) != 0xff400000) + continue; + if ((ctxprog[i] & CP_BRA_IP) != ((name) << CP_BRA_IP_SHIFT)) + continue; + ctxprog[i] = (ctxprog[i] & 0x00ff00ff) | + (ctx->ctxprog_len << CP_BRA_IP_SHIFT); + } +} + +static inline void +_cp_bra(struct nouveau_grctx *ctx, u32 mod, int flag, int state, int name) +{ + int ip = 0; + + if (mod != 2) { + ip = ctx->ctxprog_label[name] << CP_BRA_IP_SHIFT; + if (ip == 0) + ip = 0xff000000 | (name << CP_BRA_IP_SHIFT); + } + + cp_out(ctx, CP_BRA | (mod << 18) | ip | flag | + (state ? 0 : CP_BRA_IF_CLEAR)); +} +#define cp_bra(c,f,s,n) _cp_bra((c), 0, CP_FLAG_##f, CP_FLAG_##f##_##s, n) +#ifdef CP_BRA_MOD +#define cp_cal(c,f,s,n) _cp_bra((c), 1, CP_FLAG_##f, CP_FLAG_##f##_##s, n) +#define cp_ret(c,f,s) _cp_bra((c), 2, CP_FLAG_##f, CP_FLAG_##f##_##s, 0) +#endif + +static inline void +_cp_wait(struct nouveau_grctx *ctx, int flag, int state) +{ + cp_out(ctx, CP_WAIT | flag | (state ? CP_WAIT_SET : 0)); +} +#define cp_wait(c,f,s) _cp_wait((c), CP_FLAG_##f, CP_FLAG_##f##_##s) + +static inline void +_cp_set(struct nouveau_grctx *ctx, int flag, int state) +{ + cp_out(ctx, CP_SET | flag | (state ? CP_SET_1 : 0)); +} +#define cp_set(c,f,s) _cp_set((c), CP_FLAG_##f, CP_FLAG_##f##_##s) + +static inline void +cp_pos(struct nouveau_grctx *ctx, int offset) +{ + ctx->ctxvals_pos = offset; + ctx->ctxvals_base = ctx->ctxvals_pos; + + cp_lsr(ctx, ctx->ctxvals_pos); + cp_out(ctx, CP_SET_CONTEXT_POINTER); +} + +static inline void +gr_def(struct nouveau_grctx *ctx, uint32_t reg, uint32_t val) +{ + if (ctx->mode != NOUVEAU_GRCTX_VALS) + return; + + reg = (reg - 0x00400000) / 4; + reg = (reg - ctx->ctxprog_reg) + ctx->ctxvals_base; + + nv_wo32(ctx->dev, ctx->data, reg, val); +} +#endif + +#endif diff --git a/drivers/gpu/drm/nouveau/nouveau_ioc32.c b/drivers/gpu/drm/nouveau/nouveau_ioc32.c index a2c30f4611b..475ba810bba 100644 --- a/drivers/gpu/drm/nouveau/nouveau_ioc32.c +++ b/drivers/gpu/drm/nouveau/nouveau_ioc32.c @@ -61,12 +61,10 @@ long nouveau_compat_ioctl(struct file *filp, unsigned int cmd, if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(mga_compat_ioctls)) fn = nouveau_compat_ioctls[nr - DRM_COMMAND_BASE]; #endif - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn)(filp, cmd, arg); else - ret = drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 2ed41d339f6..e76ec2d207a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -299,12 +299,57 @@ nouveau_vga_set_decode(void *priv, bool state) return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM; } +static int +nouveau_card_init_channel(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_gpuobj *gpuobj; + int ret; + + ret = nouveau_channel_alloc(dev, &dev_priv->channel, + (struct drm_file *)-2, + NvDmaFB, NvDmaTT); + if (ret) + return ret; + + gpuobj = NULL; + ret = nouveau_gpuobj_dma_new(dev_priv->channel, NV_CLASS_DMA_IN_MEMORY, + 0, nouveau_mem_fb_amount(dev), + NV_DMA_ACCESS_RW, NV_DMA_TARGET_VIDMEM, + &gpuobj); + if (ret) + goto out_err; + + ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaVRAM, + gpuobj, NULL); + if (ret) + goto out_err; + + gpuobj = NULL; + ret = nouveau_gpuobj_gart_dma_new(dev_priv->channel, 0, + dev_priv->gart_info.aper_size, + NV_DMA_ACCESS_RW, &gpuobj, NULL); + if (ret) + goto out_err; + + ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaGART, + gpuobj, NULL); + if (ret) + goto out_err; + + return 0; +out_err: + nouveau_gpuobj_del(dev, &gpuobj); + nouveau_channel_free(dev_priv->channel); + dev_priv->channel = NULL; + return ret; +} + int nouveau_card_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_engine *engine; - struct nouveau_gpuobj *gpuobj; int ret; NV_DEBUG(dev, "prev state = %d\n", dev_priv->init_state); @@ -317,7 +362,7 @@ nouveau_card_init(struct drm_device *dev) /* Initialise internal driver API hooks */ ret = nouveau_init_engine_ptrs(dev); if (ret) - return ret; + goto out; engine = &dev_priv->engine; dev_priv->init_state = NOUVEAU_CARD_INIT_FAILED; @@ -325,12 +370,12 @@ nouveau_card_init(struct drm_device *dev) if (drm_core_check_feature(dev, DRIVER_MODESET)) { ret = nouveau_bios_init(dev); if (ret) - return ret; + goto out; } ret = nouveau_gpuobj_early_init(dev); if (ret) - return ret; + goto out_bios; /* Initialise instance memory, must happen before mem_init so we * know exactly how much VRAM we're able to use for "normal" @@ -338,100 +383,68 @@ nouveau_card_init(struct drm_device *dev) */ ret = engine->instmem.init(dev); if (ret) - return ret; + goto out_gpuobj_early; /* Setup the memory manager */ ret = nouveau_mem_init(dev); if (ret) - return ret; + goto out_instmem; ret = nouveau_gpuobj_init(dev); if (ret) - return ret; + goto out_mem; /* PMC */ ret = engine->mc.init(dev); if (ret) - return ret; + goto out_gpuobj; /* PTIMER */ ret = engine->timer.init(dev); if (ret) - return ret; + goto out_mc; /* PFB */ ret = engine->fb.init(dev); if (ret) - return ret; + goto out_timer; /* PGRAPH */ ret = engine->graph.init(dev); if (ret) - return ret; + goto out_fb; /* PFIFO */ ret = engine->fifo.init(dev); if (ret) - return ret; + goto out_graph; /* this call irq_preinstall, register irq handler and * call irq_postinstall */ ret = drm_irq_install(dev); if (ret) - return ret; + goto out_fifo; ret = drm_vblank_init(dev, 0); if (ret) - return ret; + goto out_irq; /* what about PVIDEO/PCRTC/PRAMDAC etc? */ - ret = nouveau_channel_alloc(dev, &dev_priv->channel, - (struct drm_file *)-2, - NvDmaFB, NvDmaTT); - if (ret) - return ret; - - gpuobj = NULL; - ret = nouveau_gpuobj_dma_new(dev_priv->channel, NV_CLASS_DMA_IN_MEMORY, - 0, nouveau_mem_fb_amount(dev), - NV_DMA_ACCESS_RW, NV_DMA_TARGET_VIDMEM, - &gpuobj); - if (ret) - return ret; - - ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaVRAM, - gpuobj, NULL); - if (ret) { - nouveau_gpuobj_del(dev, &gpuobj); - return ret; - } - - gpuobj = NULL; - ret = nouveau_gpuobj_gart_dma_new(dev_priv->channel, 0, - dev_priv->gart_info.aper_size, - NV_DMA_ACCESS_RW, &gpuobj, NULL); - if (ret) - return ret; - - ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaGART, - gpuobj, NULL); - if (ret) { - nouveau_gpuobj_del(dev, &gpuobj); - return ret; + if (!engine->graph.accel_blocked) { + ret = nouveau_card_init_channel(dev); + if (ret) + goto out_irq; } if (drm_core_check_feature(dev, DRIVER_MODESET)) { - if (dev_priv->card_type >= NV_50) { + if (dev_priv->card_type >= NV_50) ret = nv50_display_create(dev); - if (ret) - return ret; - } else { + else ret = nv04_display_create(dev); - if (ret) - return ret; - } + if (ret) + goto out_irq; } ret = nouveau_backlight_init(dev); @@ -444,6 +457,32 @@ nouveau_card_init(struct drm_device *dev) drm_helper_initial_config(dev); return 0; + +out_irq: + drm_irq_uninstall(dev); +out_fifo: + engine->fifo.takedown(dev); +out_graph: + engine->graph.takedown(dev); +out_fb: + engine->fb.takedown(dev); +out_timer: + engine->timer.takedown(dev); +out_mc: + engine->mc.takedown(dev); +out_gpuobj: + nouveau_gpuobj_takedown(dev); +out_mem: + nouveau_mem_close(dev); +out_instmem: + engine->instmem.takedown(dev); +out_gpuobj_early: + nouveau_gpuobj_late_takedown(dev); +out_bios: + nouveau_bios_takedown(dev); +out: + vga_client_register(dev->pdev, NULL, NULL, NULL); + return ret; } static void nouveau_card_takedown(struct drm_device *dev) diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c index b9136360605..d2f143ed97c 100644 --- a/drivers/gpu/drm/nouveau/nv04_crtc.c +++ b/drivers/gpu/drm/nouveau/nv04_crtc.c @@ -143,10 +143,10 @@ static void nv_crtc_calc_state_ext(struct drm_crtc *crtc, struct drm_display_mod state->pllsel |= nv_crtc->index ? PLLSEL_VPLL2_MASK : PLLSEL_VPLL1_MASK; if (pv->NM2) - NV_TRACE(dev, "vpll: n1 %d n2 %d m1 %d m2 %d log2p %d\n", + NV_DEBUG_KMS(dev, "vpll: n1 %d n2 %d m1 %d m2 %d log2p %d\n", pv->N1, pv->N2, pv->M1, pv->M2, pv->log2P); else - NV_TRACE(dev, "vpll: n %d m %d log2p %d\n", + NV_DEBUG_KMS(dev, "vpll: n %d m %d log2p %d\n", pv->N1, pv->M1, pv->log2P); nv_crtc->cursor.set_offset(nv_crtc, nv_crtc->cursor.offset); @@ -160,7 +160,7 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode) unsigned char seq1 = 0, crtc17 = 0; unsigned char crtc1A; - NV_TRACE(dev, "Setting dpms mode %d on CRTC %d\n", mode, + NV_DEBUG_KMS(dev, "Setting dpms mode %d on CRTC %d\n", mode, nv_crtc->index); if (nv_crtc->last_dpms == mode) /* Don't do unnecesary mode changes. */ @@ -603,7 +603,7 @@ nv_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); struct drm_nouveau_private *dev_priv = dev->dev_private; - NV_DEBUG(dev, "CTRC mode on CRTC %d:\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "CTRC mode on CRTC %d:\n", nv_crtc->index); drm_mode_debug_printmodeline(adjusted_mode); /* unlock must come after turning off FP_TG_CONTROL in output_prepare */ @@ -703,7 +703,7 @@ static void nv_crtc_destroy(struct drm_crtc *crtc) { struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); - NV_DEBUG(crtc->dev, "\n"); + NV_DEBUG_KMS(crtc->dev, "\n"); if (!nv_crtc) return; diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c index a5fa51714e8..d9f32879ba3 100644 --- a/drivers/gpu/drm/nouveau/nv04_dac.c +++ b/drivers/gpu/drm/nouveau/nv04_dac.c @@ -205,7 +205,7 @@ out: NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1); if (blue == 0x18) { - NV_TRACE(dev, "Load detected on head A\n"); + NV_INFO(dev, "Load detected on head A\n"); return connector_status_connected; } @@ -350,14 +350,10 @@ static void nv04_dac_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); struct drm_device *dev = encoder->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; int head = nouveau_crtc(encoder->crtc)->index; - NV_TRACE(dev, "%s called for encoder %d\n", __func__, - nv_encoder->dcb->index); - if (nv_gf4_disp_arch(dev)) { struct drm_encoder *rebind; uint32_t dac_offset = nv04_dac_output_offset(encoder); @@ -466,7 +462,7 @@ static void nv04_dac_destroy(struct drm_encoder *encoder) { struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); kfree(nv_encoder); diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c index e5b33339d59..483f875bdb6 100644 --- a/drivers/gpu/drm/nouveau/nv04_dfp.c +++ b/drivers/gpu/drm/nouveau/nv04_dfp.c @@ -261,7 +261,7 @@ static void nv04_dfp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *output_mode = &nv_encoder->mode; uint32_t mode_ratio, panel_ratio; - NV_DEBUG(dev, "Output mode on CRTC %d:\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "Output mode on CRTC %d:\n", nv_crtc->index); drm_mode_debug_printmodeline(output_mode); /* Initialize the FP registers in this CRTC. */ @@ -413,7 +413,9 @@ static void nv04_dfp_commit(struct drm_encoder *encoder) struct dcb_entry *dcbe = nv_encoder->dcb; int head = nouveau_crtc(encoder->crtc)->index; - NV_TRACE(dev, "%s called for encoder %d\n", __func__, nv_encoder->dcb->index); + NV_INFO(dev, "Output %s is running on CRTC %d using output %c\n", + drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), + nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); if (dcbe->type == OUTPUT_TMDS) run_tmds_table(dev, dcbe, head, nv_encoder->mode.clock); @@ -550,7 +552,7 @@ static void nv04_dfp_destroy(struct drm_encoder *encoder) { struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); kfree(nv_encoder); diff --git a/drivers/gpu/drm/nouveau/nv04_display.c b/drivers/gpu/drm/nouveau/nv04_display.c index b47c757ff48..ef77215fa5b 100644 --- a/drivers/gpu/drm/nouveau/nv04_display.c +++ b/drivers/gpu/drm/nouveau/nv04_display.c @@ -99,10 +99,11 @@ nv04_display_create(struct drm_device *dev) uint16_t connector[16] = { 0 }; int i, ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (nv_two_heads(dev)) nv04_display_store_initial_head_owner(dev); + nouveau_hw_save_vga_fonts(dev, 1); drm_mode_config_init(dev); drm_mode_create_scaling_mode_property(dev); @@ -203,8 +204,6 @@ nv04_display_create(struct drm_device *dev) /* Save previous state */ NVLockVgaCrtcs(dev, false); - nouveau_hw_save_vga_fonts(dev, 1); - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) crtc->funcs->save(crtc); @@ -223,7 +222,7 @@ nv04_display_destroy(struct drm_device *dev) struct drm_encoder *encoder; struct drm_crtc *crtc; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); /* Turn every CRTC off. */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { @@ -246,9 +245,9 @@ nv04_display_destroy(struct drm_device *dev) list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) crtc->funcs->restore(crtc); - nouveau_hw_save_vga_fonts(dev, 0); - drm_mode_config_cleanup(dev); + + nouveau_hw_save_vga_fonts(dev, 0); } void diff --git a/drivers/gpu/drm/nouveau/nv04_graph.c b/drivers/gpu/drm/nouveau/nv04_graph.c index 396ee92118f..d561d773c0f 100644 --- a/drivers/gpu/drm/nouveau/nv04_graph.c +++ b/drivers/gpu/drm/nouveau/nv04_graph.c @@ -543,7 +543,7 @@ nv04_graph_mthd_set_operation(struct nouveau_channel *chan, int grclass, nv_wi32(dev, instance, tmp); nv_wr32(dev, NV04_PGRAPH_CTX_SWITCH1, tmp); - nv_wr32(dev, NV04_PGRAPH_CTX_CACHE1 + subc, tmp); + nv_wr32(dev, NV04_PGRAPH_CTX_CACHE1 + (subc<<2), tmp); return 0; } diff --git a/drivers/gpu/drm/nouveau/nv10_graph.c b/drivers/gpu/drm/nouveau/nv10_graph.c index 6bf6804bb0e..6870e0ee2e7 100644 --- a/drivers/gpu/drm/nouveau/nv10_graph.c +++ b/drivers/gpu/drm/nouveau/nv10_graph.c @@ -389,49 +389,50 @@ struct graph_state { int nv10[ARRAY_SIZE(nv10_graph_ctx_regs)]; int nv17[ARRAY_SIZE(nv17_graph_ctx_regs)]; struct pipe_state pipe_state; + uint32_t lma_window[4]; }; +#define PIPE_SAVE(dev, state, addr) \ + do { \ + int __i; \ + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, addr); \ + for (__i = 0; __i < ARRAY_SIZE(state); __i++) \ + state[__i] = nv_rd32(dev, NV10_PGRAPH_PIPE_DATA); \ + } while (0) + +#define PIPE_RESTORE(dev, state, addr) \ + do { \ + int __i; \ + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, addr); \ + for (__i = 0; __i < ARRAY_SIZE(state); __i++) \ + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, state[__i]); \ + } while (0) + static void nv10_graph_save_pipe(struct nouveau_channel *chan) { struct drm_device *dev = chan->dev; struct graph_state *pgraph_ctx = chan->pgraph_ctx; - struct pipe_state *fifo_pipe_state = &pgraph_ctx->pipe_state; - int i; -#define PIPE_SAVE(addr) \ - do { \ - nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, addr); \ - for (i = 0; i < ARRAY_SIZE(fifo_pipe_state->pipe_##addr); i++) \ - fifo_pipe_state->pipe_##addr[i] = nv_rd32(dev, NV10_PGRAPH_PIPE_DATA); \ - } while (0) - - PIPE_SAVE(0x4400); - PIPE_SAVE(0x0200); - PIPE_SAVE(0x6400); - PIPE_SAVE(0x6800); - PIPE_SAVE(0x6c00); - PIPE_SAVE(0x7000); - PIPE_SAVE(0x7400); - PIPE_SAVE(0x7800); - PIPE_SAVE(0x0040); - PIPE_SAVE(0x0000); - -#undef PIPE_SAVE + struct pipe_state *pipe = &pgraph_ctx->pipe_state; + + PIPE_SAVE(dev, pipe->pipe_0x4400, 0x4400); + PIPE_SAVE(dev, pipe->pipe_0x0200, 0x0200); + PIPE_SAVE(dev, pipe->pipe_0x6400, 0x6400); + PIPE_SAVE(dev, pipe->pipe_0x6800, 0x6800); + PIPE_SAVE(dev, pipe->pipe_0x6c00, 0x6c00); + PIPE_SAVE(dev, pipe->pipe_0x7000, 0x7000); + PIPE_SAVE(dev, pipe->pipe_0x7400, 0x7400); + PIPE_SAVE(dev, pipe->pipe_0x7800, 0x7800); + PIPE_SAVE(dev, pipe->pipe_0x0040, 0x0040); + PIPE_SAVE(dev, pipe->pipe_0x0000, 0x0000); } static void nv10_graph_load_pipe(struct nouveau_channel *chan) { struct drm_device *dev = chan->dev; struct graph_state *pgraph_ctx = chan->pgraph_ctx; - struct pipe_state *fifo_pipe_state = &pgraph_ctx->pipe_state; - int i; + struct pipe_state *pipe = &pgraph_ctx->pipe_state; uint32_t xfmode0, xfmode1; -#define PIPE_RESTORE(addr) \ - do { \ - nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, addr); \ - for (i = 0; i < ARRAY_SIZE(fifo_pipe_state->pipe_##addr); i++) \ - nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, fifo_pipe_state->pipe_##addr[i]); \ - } while (0) - + int i; nouveau_wait_for_idle(dev); /* XXX check haiku comments */ @@ -457,24 +458,22 @@ static void nv10_graph_load_pipe(struct nouveau_channel *chan) nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000008); - PIPE_RESTORE(0x0200); + PIPE_RESTORE(dev, pipe->pipe_0x0200, 0x0200); nouveau_wait_for_idle(dev); /* restore XFMODE */ nv_wr32(dev, NV10_PGRAPH_XFMODE0, xfmode0); nv_wr32(dev, NV10_PGRAPH_XFMODE1, xfmode1); - PIPE_RESTORE(0x6400); - PIPE_RESTORE(0x6800); - PIPE_RESTORE(0x6c00); - PIPE_RESTORE(0x7000); - PIPE_RESTORE(0x7400); - PIPE_RESTORE(0x7800); - PIPE_RESTORE(0x4400); - PIPE_RESTORE(0x0000); - PIPE_RESTORE(0x0040); + PIPE_RESTORE(dev, pipe->pipe_0x6400, 0x6400); + PIPE_RESTORE(dev, pipe->pipe_0x6800, 0x6800); + PIPE_RESTORE(dev, pipe->pipe_0x6c00, 0x6c00); + PIPE_RESTORE(dev, pipe->pipe_0x7000, 0x7000); + PIPE_RESTORE(dev, pipe->pipe_0x7400, 0x7400); + PIPE_RESTORE(dev, pipe->pipe_0x7800, 0x7800); + PIPE_RESTORE(dev, pipe->pipe_0x4400, 0x4400); + PIPE_RESTORE(dev, pipe->pipe_0x0000, 0x0000); + PIPE_RESTORE(dev, pipe->pipe_0x0040, 0x0040); nouveau_wait_for_idle(dev); - -#undef PIPE_RESTORE } static void nv10_graph_create_pipe(struct nouveau_channel *chan) @@ -832,6 +831,9 @@ int nv10_graph_init(struct drm_device *dev) (1<<31)); if (dev_priv->chipset >= 0x17) { nv_wr32(dev, NV10_PGRAPH_DEBUG_4, 0x1f000000); + nv_wr32(dev, 0x400a10, 0x3ff3fb6); + nv_wr32(dev, 0x400838, 0x2f8684); + nv_wr32(dev, 0x40083c, 0x115f3f); nv_wr32(dev, 0x004006b0, 0x40000020); } else nv_wr32(dev, NV10_PGRAPH_DEBUG_4, 0x00000000); @@ -867,6 +869,115 @@ void nv10_graph_takedown(struct drm_device *dev) { } +static int +nv17_graph_mthd_lma_window(struct nouveau_channel *chan, int grclass, + int mthd, uint32_t data) +{ + struct drm_device *dev = chan->dev; + struct graph_state *ctx = chan->pgraph_ctx; + struct pipe_state *pipe = &ctx->pipe_state; + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + uint32_t pipe_0x0040[1], pipe_0x64c0[8], pipe_0x6a80[3], pipe_0x6ab0[3]; + uint32_t xfmode0, xfmode1; + int i; + + ctx->lma_window[(mthd - 0x1638) / 4] = data; + + if (mthd != 0x1644) + return 0; + + nouveau_wait_for_idle(dev); + + PIPE_SAVE(dev, pipe_0x0040, 0x0040); + PIPE_SAVE(dev, pipe->pipe_0x0200, 0x0200); + + PIPE_RESTORE(dev, ctx->lma_window, 0x6790); + + nouveau_wait_for_idle(dev); + + xfmode0 = nv_rd32(dev, NV10_PGRAPH_XFMODE0); + xfmode1 = nv_rd32(dev, NV10_PGRAPH_XFMODE1); + + PIPE_SAVE(dev, pipe->pipe_0x4400, 0x4400); + PIPE_SAVE(dev, pipe_0x64c0, 0x64c0); + PIPE_SAVE(dev, pipe_0x6ab0, 0x6ab0); + PIPE_SAVE(dev, pipe_0x6a80, 0x6a80); + + nouveau_wait_for_idle(dev); + + nv_wr32(dev, NV10_PGRAPH_XFMODE0, 0x10000000); + nv_wr32(dev, NV10_PGRAPH_XFMODE1, 0x00000000); + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x000064c0); + for (i = 0; i < 4; i++) + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x3f800000); + for (i = 0; i < 4; i++) + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000000); + + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x00006ab0); + for (i = 0; i < 3; i++) + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x3f800000); + + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x00006a80); + for (i = 0; i < 3; i++) + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000000); + + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x00000040); + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000008); + + PIPE_RESTORE(dev, pipe->pipe_0x0200, 0x0200); + + nouveau_wait_for_idle(dev); + + PIPE_RESTORE(dev, pipe_0x0040, 0x0040); + + nv_wr32(dev, NV10_PGRAPH_XFMODE0, xfmode0); + nv_wr32(dev, NV10_PGRAPH_XFMODE1, xfmode1); + + PIPE_RESTORE(dev, pipe_0x64c0, 0x64c0); + PIPE_RESTORE(dev, pipe_0x6ab0, 0x6ab0); + PIPE_RESTORE(dev, pipe_0x6a80, 0x6a80); + PIPE_RESTORE(dev, pipe->pipe_0x4400, 0x4400); + + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x000000c0); + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000000); + + nouveau_wait_for_idle(dev); + + pgraph->fifo_access(dev, true); + + return 0; +} + +static int +nv17_graph_mthd_lma_enable(struct nouveau_channel *chan, int grclass, + int mthd, uint32_t data) +{ + struct drm_device *dev = chan->dev; + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + + nouveau_wait_for_idle(dev); + + nv_wr32(dev, NV10_PGRAPH_DEBUG_4, + nv_rd32(dev, NV10_PGRAPH_DEBUG_4) | 0x1 << 8); + nv_wr32(dev, 0x004006b0, + nv_rd32(dev, 0x004006b0) | 0x8 << 24); + + pgraph->fifo_access(dev, true); + + return 0; +} + +static struct nouveau_pgraph_object_method nv17_graph_celsius_mthds[] = { + { 0x1638, nv17_graph_mthd_lma_window }, + { 0x163c, nv17_graph_mthd_lma_window }, + { 0x1640, nv17_graph_mthd_lma_window }, + { 0x1644, nv17_graph_mthd_lma_window }, + { 0x1658, nv17_graph_mthd_lma_enable }, + {} +}; + struct nouveau_pgraph_object_class nv10_graph_grclass[] = { { 0x0030, false, NULL }, /* null */ { 0x0039, false, NULL }, /* m2mf */ @@ -887,6 +998,6 @@ struct nouveau_pgraph_object_class nv10_graph_grclass[] = { { 0x0095, false, NULL }, /* multitex_tri */ { 0x0056, false, NULL }, /* celcius (nv10) */ { 0x0096, false, NULL }, /* celcius (nv11) */ - { 0x0099, false, NULL }, /* celcius (nv17) */ + { 0x0099, false, nv17_graph_celsius_mthds }, /* celcius (nv17) */ {} }; diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c index 46cfd9c6047..81c01353a9f 100644 --- a/drivers/gpu/drm/nouveau/nv17_tv.c +++ b/drivers/gpu/drm/nouveau/nv17_tv.c @@ -219,7 +219,7 @@ static void nv17_tv_dpms(struct drm_encoder *encoder, int mode) return; nouveau_encoder(encoder)->last_dpms = mode; - NV_TRACE(dev, "Setting dpms mode %d on TV encoder (output %d)\n", + NV_INFO(dev, "Setting dpms mode %d on TV encoder (output %d)\n", mode, nouveau_encoder(encoder)->dcb->index); regs->ptv_200 &= ~1; @@ -619,7 +619,7 @@ static void nv17_tv_destroy(struct drm_encoder *encoder) { struct nv17_tv_encoder *tv_enc = to_tv_enc(encoder); - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); kfree(tv_enc); diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c index 7e8547cb583..2b332bb55ac 100644 --- a/drivers/gpu/drm/nouveau/nv40_graph.c +++ b/drivers/gpu/drm/nouveau/nv40_graph.c @@ -24,36 +24,10 @@ * */ -#include <linux/firmware.h> - #include "drmP.h" #include "drm.h" #include "nouveau_drv.h" - -MODULE_FIRMWARE("nouveau/nv40.ctxprog"); -MODULE_FIRMWARE("nouveau/nv40.ctxvals"); -MODULE_FIRMWARE("nouveau/nv41.ctxprog"); -MODULE_FIRMWARE("nouveau/nv41.ctxvals"); -MODULE_FIRMWARE("nouveau/nv42.ctxprog"); -MODULE_FIRMWARE("nouveau/nv42.ctxvals"); -MODULE_FIRMWARE("nouveau/nv43.ctxprog"); -MODULE_FIRMWARE("nouveau/nv43.ctxvals"); -MODULE_FIRMWARE("nouveau/nv44.ctxprog"); -MODULE_FIRMWARE("nouveau/nv44.ctxvals"); -MODULE_FIRMWARE("nouveau/nv46.ctxprog"); -MODULE_FIRMWARE("nouveau/nv46.ctxvals"); -MODULE_FIRMWARE("nouveau/nv47.ctxprog"); -MODULE_FIRMWARE("nouveau/nv47.ctxvals"); -MODULE_FIRMWARE("nouveau/nv49.ctxprog"); -MODULE_FIRMWARE("nouveau/nv49.ctxvals"); -MODULE_FIRMWARE("nouveau/nv4a.ctxprog"); -MODULE_FIRMWARE("nouveau/nv4a.ctxvals"); -MODULE_FIRMWARE("nouveau/nv4b.ctxprog"); -MODULE_FIRMWARE("nouveau/nv4b.ctxvals"); -MODULE_FIRMWARE("nouveau/nv4c.ctxprog"); -MODULE_FIRMWARE("nouveau/nv4c.ctxvals"); -MODULE_FIRMWARE("nouveau/nv4e.ctxprog"); -MODULE_FIRMWARE("nouveau/nv4e.ctxvals"); +#include "nouveau_grctx.h" struct nouveau_channel * nv40_graph_channel(struct drm_device *dev) @@ -83,27 +57,30 @@ nv40_graph_create_context(struct nouveau_channel *chan) { struct drm_device *dev = chan->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_gpuobj *ctx; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; int ret; - /* Allocate a 175KiB block of PRAMIN to store the context. This - * is massive overkill for a lot of chipsets, but it should be safe - * until we're able to implement this properly (will happen at more - * or less the same time we're able to write our own context programs. - */ - ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, 175*1024, 16, - NVOBJ_FLAG_ZERO_ALLOC, - &chan->ramin_grctx); + ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, pgraph->grctx_size, + 16, NVOBJ_FLAG_ZERO_ALLOC, + &chan->ramin_grctx); if (ret) return ret; - ctx = chan->ramin_grctx->gpuobj; /* Initialise default context values */ dev_priv->engine.instmem.prepare_access(dev, true); - nv40_grctx_vals_load(dev, ctx); - nv_wo32(dev, ctx, 0, ctx->im_pramin->start); - dev_priv->engine.instmem.finish_access(dev); + if (!pgraph->ctxprog) { + struct nouveau_grctx ctx = {}; + ctx.dev = chan->dev; + ctx.mode = NOUVEAU_GRCTX_VALS; + ctx.data = chan->ramin_grctx->gpuobj; + nv40_grctx_init(&ctx); + } else { + nouveau_grctx_vals_load(dev, chan->ramin_grctx->gpuobj); + } + nv_wo32(dev, chan->ramin_grctx->gpuobj, 0, + chan->ramin_grctx->gpuobj->im_pramin->start); + dev_priv->engine.instmem.finish_access(dev); return 0; } @@ -204,139 +181,6 @@ nv40_graph_unload_context(struct drm_device *dev) return ret; } -struct nouveau_ctxprog { - uint32_t signature; - uint8_t version; - uint16_t length; - uint32_t data[]; -} __attribute__ ((packed)); - -struct nouveau_ctxvals { - uint32_t signature; - uint8_t version; - uint32_t length; - struct { - uint32_t offset; - uint32_t value; - } data[]; -} __attribute__ ((packed)); - -int -nv40_grctx_init(struct drm_device *dev) -{ - struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; - const int chipset = dev_priv->chipset; - const struct firmware *fw; - const struct nouveau_ctxprog *cp; - const struct nouveau_ctxvals *cv; - char name[32]; - int ret, i; - - pgraph->accel_blocked = true; - - if (!pgraph->ctxprog) { - sprintf(name, "nouveau/nv%02x.ctxprog", chipset); - ret = request_firmware(&fw, name, &dev->pdev->dev); - if (ret) { - NV_ERROR(dev, "No ctxprog for NV%02x\n", chipset); - return ret; - } - - pgraph->ctxprog = kmalloc(fw->size, GFP_KERNEL); - if (!pgraph->ctxprog) { - NV_ERROR(dev, "OOM copying ctxprog\n"); - release_firmware(fw); - return -ENOMEM; - } - memcpy(pgraph->ctxprog, fw->data, fw->size); - - cp = pgraph->ctxprog; - if (le32_to_cpu(cp->signature) != 0x5043564e || - cp->version != 0 || - le16_to_cpu(cp->length) != ((fw->size - 7) / 4)) { - NV_ERROR(dev, "ctxprog invalid\n"); - release_firmware(fw); - nv40_grctx_fini(dev); - return -EINVAL; - } - release_firmware(fw); - } - - if (!pgraph->ctxvals) { - sprintf(name, "nouveau/nv%02x.ctxvals", chipset); - ret = request_firmware(&fw, name, &dev->pdev->dev); - if (ret) { - NV_ERROR(dev, "No ctxvals for NV%02x\n", chipset); - nv40_grctx_fini(dev); - return ret; - } - - pgraph->ctxvals = kmalloc(fw->size, GFP_KERNEL); - if (!pgraph->ctxprog) { - NV_ERROR(dev, "OOM copying ctxprog\n"); - release_firmware(fw); - nv40_grctx_fini(dev); - return -ENOMEM; - } - memcpy(pgraph->ctxvals, fw->data, fw->size); - - cv = (void *)pgraph->ctxvals; - if (le32_to_cpu(cv->signature) != 0x5643564e || - cv->version != 0 || - le32_to_cpu(cv->length) != ((fw->size - 9) / 8)) { - NV_ERROR(dev, "ctxvals invalid\n"); - release_firmware(fw); - nv40_grctx_fini(dev); - return -EINVAL; - } - release_firmware(fw); - } - - cp = pgraph->ctxprog; - - nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0); - for (i = 0; i < le16_to_cpu(cp->length); i++) - nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, - le32_to_cpu(cp->data[i])); - - pgraph->accel_blocked = false; - return 0; -} - -void -nv40_grctx_fini(struct drm_device *dev) -{ - struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; - - if (pgraph->ctxprog) { - kfree(pgraph->ctxprog); - pgraph->ctxprog = NULL; - } - - if (pgraph->ctxvals) { - kfree(pgraph->ctxprog); - pgraph->ctxvals = NULL; - } -} - -void -nv40_grctx_vals_load(struct drm_device *dev, struct nouveau_gpuobj *ctx) -{ - struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; - struct nouveau_ctxvals *cv = pgraph->ctxvals; - int i; - - if (!cv) - return; - - for (i = 0; i < le32_to_cpu(cv->length); i++) - nv_wo32(dev, ctx, le32_to_cpu(cv->data[i].offset), - le32_to_cpu(cv->data[i].value)); -} - /* * G70 0x47 * G71 0x49 @@ -359,7 +203,26 @@ nv40_graph_init(struct drm_device *dev) nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) | NV_PMC_ENABLE_PGRAPH); - nv40_grctx_init(dev); + if (nouveau_ctxfw) { + nouveau_grctx_prog_load(dev); + dev_priv->engine.graph.grctx_size = 175 * 1024; + } + + if (!dev_priv->engine.graph.ctxprog) { + struct nouveau_grctx ctx = {}; + uint32_t cp[256]; + + ctx.dev = dev; + ctx.mode = NOUVEAU_GRCTX_PROG; + ctx.data = cp; + ctx.ctxprog_max = 256; + nv40_grctx_init(&ctx); + dev_priv->engine.graph.grctx_size = ctx.ctxvals_pos * 4; + + nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0); + for (i = 0; i < ctx.ctxprog_len; i++) + nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, cp[i]); + } /* No context present currently */ nv_wr32(dev, NV40_PGRAPH_CTXCTL_CUR, 0x00000000); @@ -539,6 +402,7 @@ nv40_graph_init(struct drm_device *dev) void nv40_graph_takedown(struct drm_device *dev) { + nouveau_grctx_fini(dev); } struct nouveau_pgraph_object_class nv40_graph_grclass[] = { diff --git a/drivers/gpu/drm/nouveau/nv40_grctx.c b/drivers/gpu/drm/nouveau/nv40_grctx.c new file mode 100644 index 00000000000..11b11c31f54 --- /dev/null +++ b/drivers/gpu/drm/nouveau/nv40_grctx.c @@ -0,0 +1,678 @@ +/* + * Copyright 2009 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Ben Skeggs + */ + +/* NVIDIA context programs handle a number of other conditions which are + * not implemented in our versions. It's not clear why NVIDIA context + * programs have this code, nor whether it's strictly necessary for + * correct operation. We'll implement additional handling if/when we + * discover it's necessary. + * + * - On context save, NVIDIA set 0x400314 bit 0 to 1 if the "3D state" + * flag is set, this gets saved into the context. + * - On context save, the context program for all cards load nsource + * into a flag register and check for ILLEGAL_MTHD. If it's set, + * opcode 0x60000d is called before resuming normal operation. + * - Some context programs check more conditions than the above. NV44 + * checks: ((nsource & 0x0857) || (0x400718 & 0x0100) || (intr & 0x0001)) + * and calls 0x60000d before resuming normal operation. + * - At the very beginning of NVIDIA's context programs, flag 9 is checked + * and if true 0x800001 is called with count=0, pos=0, the flag is cleared + * and then the ctxprog is aborted. It looks like a complicated NOP, + * its purpose is unknown. + * - In the section of code that loads the per-vs state, NVIDIA check + * flag 10. If it's set, they only transfer the small 0x300 byte block + * of state + the state for a single vs as opposed to the state for + * all vs units. It doesn't seem likely that it'll occur in normal + * operation, especially seeing as it appears NVIDIA may have screwed + * up the ctxprogs for some cards and have an invalid instruction + * rather than a cp_lsr(ctx, dwords_for_1_vs_unit) instruction. + * - There's a number of places where context offset 0 (where we place + * the PRAMIN offset of the context) is loaded into either 0x408000, + * 0x408004 or 0x408008. Not sure what's up there either. + * - The ctxprogs for some cards save 0x400a00 again during the cleanup + * path for auto-loadctx. + */ + +#define CP_FLAG_CLEAR 0 +#define CP_FLAG_SET 1 +#define CP_FLAG_SWAP_DIRECTION ((0 * 32) + 0) +#define CP_FLAG_SWAP_DIRECTION_LOAD 0 +#define CP_FLAG_SWAP_DIRECTION_SAVE 1 +#define CP_FLAG_USER_SAVE ((0 * 32) + 5) +#define CP_FLAG_USER_SAVE_NOT_PENDING 0 +#define CP_FLAG_USER_SAVE_PENDING 1 +#define CP_FLAG_USER_LOAD ((0 * 32) + 6) +#define CP_FLAG_USER_LOAD_NOT_PENDING 0 +#define CP_FLAG_USER_LOAD_PENDING 1 +#define CP_FLAG_STATUS ((3 * 32) + 0) +#define CP_FLAG_STATUS_IDLE 0 +#define CP_FLAG_STATUS_BUSY 1 +#define CP_FLAG_AUTO_SAVE ((3 * 32) + 4) +#define CP_FLAG_AUTO_SAVE_NOT_PENDING 0 +#define CP_FLAG_AUTO_SAVE_PENDING 1 +#define CP_FLAG_AUTO_LOAD ((3 * 32) + 5) +#define CP_FLAG_AUTO_LOAD_NOT_PENDING 0 +#define CP_FLAG_AUTO_LOAD_PENDING 1 +#define CP_FLAG_UNK54 ((3 * 32) + 6) +#define CP_FLAG_UNK54_CLEAR 0 +#define CP_FLAG_UNK54_SET 1 +#define CP_FLAG_ALWAYS ((3 * 32) + 8) +#define CP_FLAG_ALWAYS_FALSE 0 +#define CP_FLAG_ALWAYS_TRUE 1 +#define CP_FLAG_UNK57 ((3 * 32) + 9) +#define CP_FLAG_UNK57_CLEAR 0 +#define CP_FLAG_UNK57_SET 1 + +#define CP_CTX 0x00100000 +#define CP_CTX_COUNT 0x000fc000 +#define CP_CTX_COUNT_SHIFT 14 +#define CP_CTX_REG 0x00003fff +#define CP_LOAD_SR 0x00200000 +#define CP_LOAD_SR_VALUE 0x000fffff +#define CP_BRA 0x00400000 +#define CP_BRA_IP 0x0000ff00 +#define CP_BRA_IP_SHIFT 8 +#define CP_BRA_IF_CLEAR 0x00000080 +#define CP_BRA_FLAG 0x0000007f +#define CP_WAIT 0x00500000 +#define CP_WAIT_SET 0x00000080 +#define CP_WAIT_FLAG 0x0000007f +#define CP_SET 0x00700000 +#define CP_SET_1 0x00000080 +#define CP_SET_FLAG 0x0000007f +#define CP_NEXT_TO_SWAP 0x00600007 +#define CP_NEXT_TO_CURRENT 0x00600009 +#define CP_SET_CONTEXT_POINTER 0x0060000a +#define CP_END 0x0060000e +#define CP_LOAD_MAGIC_UNK01 0x00800001 /* unknown */ +#define CP_LOAD_MAGIC_NV44TCL 0x00800029 /* per-vs state (0x4497) */ +#define CP_LOAD_MAGIC_NV40TCL 0x00800041 /* per-vs state (0x4097) */ + +#include "drmP.h" +#include "nouveau_drv.h" +#include "nouveau_grctx.h" + +/* TODO: + * - get vs count from 0x1540 + * - document unimplemented bits compared to nvidia + * - nsource handling + * - R0 & 0x0200 handling + * - single-vs handling + * - 400314 bit 0 + */ + +static int +nv40_graph_4097(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + + if ((dev_priv->chipset & 0xf0) == 0x60) + return 0; + + return !!(0x0baf & (1 << dev_priv->chipset)); +} + +static int +nv40_graph_vs_count(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + + switch (dev_priv->chipset) { + case 0x47: + case 0x49: + case 0x4b: + return 8; + case 0x40: + return 6; + case 0x41: + case 0x42: + return 5; + case 0x43: + case 0x44: + case 0x46: + case 0x4a: + return 3; + case 0x4c: + case 0x4e: + case 0x67: + default: + return 1; + } +} + + +enum cp_label { + cp_check_load = 1, + cp_setup_auto_load, + cp_setup_load, + cp_setup_save, + cp_swap_state, + cp_swap_state3d_3_is_save, + cp_prepare_exit, + cp_exit, +}; + +static void +nv40_graph_construct_general(struct nouveau_grctx *ctx) +{ + struct drm_nouveau_private *dev_priv = ctx->dev->dev_private; + int i; + + cp_ctx(ctx, 0x4000a4, 1); + gr_def(ctx, 0x4000a4, 0x00000008); + cp_ctx(ctx, 0x400144, 58); + gr_def(ctx, 0x400144, 0x00000001); + cp_ctx(ctx, 0x400314, 1); + gr_def(ctx, 0x400314, 0x00000000); + cp_ctx(ctx, 0x400400, 10); + cp_ctx(ctx, 0x400480, 10); + cp_ctx(ctx, 0x400500, 19); + gr_def(ctx, 0x400514, 0x00040000); + gr_def(ctx, 0x400524, 0x55555555); + gr_def(ctx, 0x400528, 0x55555555); + gr_def(ctx, 0x40052c, 0x55555555); + gr_def(ctx, 0x400530, 0x55555555); + cp_ctx(ctx, 0x400560, 6); + gr_def(ctx, 0x400568, 0x0000ffff); + gr_def(ctx, 0x40056c, 0x0000ffff); + cp_ctx(ctx, 0x40057c, 5); + cp_ctx(ctx, 0x400710, 3); + gr_def(ctx, 0x400710, 0x20010001); + gr_def(ctx, 0x400714, 0x0f73ef00); + cp_ctx(ctx, 0x400724, 1); + gr_def(ctx, 0x400724, 0x02008821); + cp_ctx(ctx, 0x400770, 3); + if (dev_priv->chipset == 0x40) { + cp_ctx(ctx, 0x400814, 4); + cp_ctx(ctx, 0x400828, 5); + cp_ctx(ctx, 0x400840, 5); + gr_def(ctx, 0x400850, 0x00000040); + cp_ctx(ctx, 0x400858, 4); + gr_def(ctx, 0x400858, 0x00000040); + gr_def(ctx, 0x40085c, 0x00000040); + gr_def(ctx, 0x400864, 0x80000000); + cp_ctx(ctx, 0x40086c, 9); + gr_def(ctx, 0x40086c, 0x80000000); + gr_def(ctx, 0x400870, 0x80000000); + gr_def(ctx, 0x400874, 0x80000000); + gr_def(ctx, 0x400878, 0x80000000); + gr_def(ctx, 0x400888, 0x00000040); + gr_def(ctx, 0x40088c, 0x80000000); + cp_ctx(ctx, 0x4009c0, 8); + gr_def(ctx, 0x4009cc, 0x80000000); + gr_def(ctx, 0x4009dc, 0x80000000); + } else { + cp_ctx(ctx, 0x400840, 20); + if (!nv40_graph_4097(ctx->dev)) { + for (i = 0; i < 8; i++) + gr_def(ctx, 0x400860 + (i * 4), 0x00000001); + } + gr_def(ctx, 0x400880, 0x00000040); + gr_def(ctx, 0x400884, 0x00000040); + gr_def(ctx, 0x400888, 0x00000040); + cp_ctx(ctx, 0x400894, 11); + gr_def(ctx, 0x400894, 0x00000040); + if (nv40_graph_4097(ctx->dev)) { + for (i = 0; i < 8; i++) + gr_def(ctx, 0x4008a0 + (i * 4), 0x80000000); + } + cp_ctx(ctx, 0x4008e0, 2); + cp_ctx(ctx, 0x4008f8, 2); + if (dev_priv->chipset == 0x4c || + (dev_priv->chipset & 0xf0) == 0x60) + cp_ctx(ctx, 0x4009f8, 1); + } + cp_ctx(ctx, 0x400a00, 73); + gr_def(ctx, 0x400b0c, 0x0b0b0b0c); + cp_ctx(ctx, 0x401000, 4); + cp_ctx(ctx, 0x405004, 1); + switch (dev_priv->chipset) { + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x403448, 1); + gr_def(ctx, 0x403448, 0x00001010); + break; + default: + cp_ctx(ctx, 0x403440, 1); + switch (dev_priv->chipset) { + case 0x40: + gr_def(ctx, 0x403440, 0x00000010); + break; + case 0x44: + case 0x46: + case 0x4a: + gr_def(ctx, 0x403440, 0x00003010); + break; + case 0x41: + case 0x42: + case 0x43: + case 0x4c: + case 0x4e: + case 0x67: + default: + gr_def(ctx, 0x403440, 0x00001010); + break; + } + break; + } +} + +static void +nv40_graph_construct_state3d(struct nouveau_grctx *ctx) +{ + struct drm_nouveau_private *dev_priv = ctx->dev->dev_private; + int i; + + if (dev_priv->chipset == 0x40) { + cp_ctx(ctx, 0x401880, 51); + gr_def(ctx, 0x401940, 0x00000100); + } else + if (dev_priv->chipset == 0x46 || dev_priv->chipset == 0x47 || + dev_priv->chipset == 0x49 || dev_priv->chipset == 0x4b) { + cp_ctx(ctx, 0x401880, 32); + for (i = 0; i < 16; i++) + gr_def(ctx, 0x401880 + (i * 4), 0x00000111); + if (dev_priv->chipset == 0x46) + cp_ctx(ctx, 0x401900, 16); + cp_ctx(ctx, 0x401940, 3); + } + cp_ctx(ctx, 0x40194c, 18); + gr_def(ctx, 0x401954, 0x00000111); + gr_def(ctx, 0x401958, 0x00080060); + gr_def(ctx, 0x401974, 0x00000080); + gr_def(ctx, 0x401978, 0xffff0000); + gr_def(ctx, 0x40197c, 0x00000001); + gr_def(ctx, 0x401990, 0x46400000); + if (dev_priv->chipset == 0x40) { + cp_ctx(ctx, 0x4019a0, 2); + cp_ctx(ctx, 0x4019ac, 5); + } else { + cp_ctx(ctx, 0x4019a0, 1); + cp_ctx(ctx, 0x4019b4, 3); + } + gr_def(ctx, 0x4019bc, 0xffff0000); + switch (dev_priv->chipset) { + case 0x46: + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x4019c0, 18); + for (i = 0; i < 16; i++) + gr_def(ctx, 0x4019c0 + (i * 4), 0x88888888); + break; + } + cp_ctx(ctx, 0x401a08, 8); + gr_def(ctx, 0x401a10, 0x0fff0000); + gr_def(ctx, 0x401a14, 0x0fff0000); + gr_def(ctx, 0x401a1c, 0x00011100); + cp_ctx(ctx, 0x401a2c, 4); + cp_ctx(ctx, 0x401a44, 26); + for (i = 0; i < 16; i++) + gr_def(ctx, 0x401a44 + (i * 4), 0x07ff0000); + gr_def(ctx, 0x401a8c, 0x4b7fffff); + if (dev_priv->chipset == 0x40) { + cp_ctx(ctx, 0x401ab8, 3); + } else { + cp_ctx(ctx, 0x401ab8, 1); + cp_ctx(ctx, 0x401ac0, 1); + } + cp_ctx(ctx, 0x401ad0, 8); + gr_def(ctx, 0x401ad0, 0x30201000); + gr_def(ctx, 0x401ad4, 0x70605040); + gr_def(ctx, 0x401ad8, 0xb8a89888); + gr_def(ctx, 0x401adc, 0xf8e8d8c8); + cp_ctx(ctx, 0x401b10, dev_priv->chipset == 0x40 ? 2 : 1); + gr_def(ctx, 0x401b10, 0x40100000); + cp_ctx(ctx, 0x401b18, dev_priv->chipset == 0x40 ? 6 : 5); + gr_def(ctx, 0x401b28, dev_priv->chipset == 0x40 ? + 0x00000004 : 0x00000000); + cp_ctx(ctx, 0x401b30, 25); + gr_def(ctx, 0x401b34, 0x0000ffff); + gr_def(ctx, 0x401b68, 0x435185d6); + gr_def(ctx, 0x401b6c, 0x2155b699); + gr_def(ctx, 0x401b70, 0xfedcba98); + gr_def(ctx, 0x401b74, 0x00000098); + gr_def(ctx, 0x401b84, 0xffffffff); + gr_def(ctx, 0x401b88, 0x00ff7000); + gr_def(ctx, 0x401b8c, 0x0000ffff); + if (dev_priv->chipset != 0x44 && dev_priv->chipset != 0x4a && + dev_priv->chipset != 0x4e) + cp_ctx(ctx, 0x401b94, 1); + cp_ctx(ctx, 0x401b98, 8); + gr_def(ctx, 0x401b9c, 0x00ff0000); + cp_ctx(ctx, 0x401bc0, 9); + gr_def(ctx, 0x401be0, 0x00ffff00); + cp_ctx(ctx, 0x401c00, 192); + for (i = 0; i < 16; i++) { /* fragment texture units */ + gr_def(ctx, 0x401c40 + (i * 4), 0x00018488); + gr_def(ctx, 0x401c80 + (i * 4), 0x00028202); + gr_def(ctx, 0x401d00 + (i * 4), 0x0000aae4); + gr_def(ctx, 0x401d40 + (i * 4), 0x01012000); + gr_def(ctx, 0x401d80 + (i * 4), 0x00080008); + gr_def(ctx, 0x401e00 + (i * 4), 0x00100008); + } + for (i = 0; i < 4; i++) { /* vertex texture units */ + gr_def(ctx, 0x401e90 + (i * 4), 0x0001bc80); + gr_def(ctx, 0x401ea0 + (i * 4), 0x00000202); + gr_def(ctx, 0x401ec0 + (i * 4), 0x00000008); + gr_def(ctx, 0x401ee0 + (i * 4), 0x00080008); + } + cp_ctx(ctx, 0x400f5c, 3); + gr_def(ctx, 0x400f5c, 0x00000002); + cp_ctx(ctx, 0x400f84, 1); +} + +static void +nv40_graph_construct_state3d_2(struct nouveau_grctx *ctx) +{ + struct drm_nouveau_private *dev_priv = ctx->dev->dev_private; + int i; + + cp_ctx(ctx, 0x402000, 1); + cp_ctx(ctx, 0x402404, dev_priv->chipset == 0x40 ? 1 : 2); + switch (dev_priv->chipset) { + case 0x40: + gr_def(ctx, 0x402404, 0x00000001); + break; + case 0x4c: + case 0x4e: + case 0x67: + gr_def(ctx, 0x402404, 0x00000020); + break; + case 0x46: + case 0x49: + case 0x4b: + gr_def(ctx, 0x402404, 0x00000421); + break; + default: + gr_def(ctx, 0x402404, 0x00000021); + } + if (dev_priv->chipset != 0x40) + gr_def(ctx, 0x402408, 0x030c30c3); + switch (dev_priv->chipset) { + case 0x44: + case 0x46: + case 0x4a: + case 0x4c: + case 0x4e: + case 0x67: + cp_ctx(ctx, 0x402440, 1); + gr_def(ctx, 0x402440, 0x00011001); + break; + default: + break; + } + cp_ctx(ctx, 0x402480, dev_priv->chipset == 0x40 ? 8 : 9); + gr_def(ctx, 0x402488, 0x3e020200); + gr_def(ctx, 0x40248c, 0x00ffffff); + switch (dev_priv->chipset) { + case 0x40: + gr_def(ctx, 0x402490, 0x60103f00); + break; + case 0x47: + gr_def(ctx, 0x402490, 0x40103f00); + break; + case 0x41: + case 0x42: + case 0x49: + case 0x4b: + gr_def(ctx, 0x402490, 0x20103f00); + break; + default: + gr_def(ctx, 0x402490, 0x0c103f00); + break; + } + gr_def(ctx, 0x40249c, dev_priv->chipset <= 0x43 ? + 0x00020000 : 0x00040000); + cp_ctx(ctx, 0x402500, 31); + gr_def(ctx, 0x402530, 0x00008100); + if (dev_priv->chipset == 0x40) + cp_ctx(ctx, 0x40257c, 6); + cp_ctx(ctx, 0x402594, 16); + cp_ctx(ctx, 0x402800, 17); + gr_def(ctx, 0x402800, 0x00000001); + switch (dev_priv->chipset) { + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x402864, 1); + gr_def(ctx, 0x402864, 0x00001001); + cp_ctx(ctx, 0x402870, 3); + gr_def(ctx, 0x402878, 0x00000003); + if (dev_priv->chipset != 0x47) { /* belong at end!! */ + cp_ctx(ctx, 0x402900, 1); + cp_ctx(ctx, 0x402940, 1); + cp_ctx(ctx, 0x402980, 1); + cp_ctx(ctx, 0x4029c0, 1); + cp_ctx(ctx, 0x402a00, 1); + cp_ctx(ctx, 0x402a40, 1); + cp_ctx(ctx, 0x402a80, 1); + cp_ctx(ctx, 0x402ac0, 1); + } + break; + case 0x40: + cp_ctx(ctx, 0x402844, 1); + gr_def(ctx, 0x402844, 0x00000001); + cp_ctx(ctx, 0x402850, 1); + break; + default: + cp_ctx(ctx, 0x402844, 1); + gr_def(ctx, 0x402844, 0x00001001); + cp_ctx(ctx, 0x402850, 2); + gr_def(ctx, 0x402854, 0x00000003); + break; + } + + cp_ctx(ctx, 0x402c00, 4); + gr_def(ctx, 0x402c00, dev_priv->chipset == 0x40 ? + 0x80800001 : 0x00888001); + switch (dev_priv->chipset) { + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x402c20, 40); + for (i = 0; i < 32; i++) + gr_def(ctx, 0x402c40 + (i * 4), 0xffffffff); + cp_ctx(ctx, 0x4030b8, 13); + gr_def(ctx, 0x4030dc, 0x00000005); + gr_def(ctx, 0x4030e8, 0x0000ffff); + break; + default: + cp_ctx(ctx, 0x402c10, 4); + if (dev_priv->chipset == 0x40) + cp_ctx(ctx, 0x402c20, 36); + else + if (dev_priv->chipset <= 0x42) + cp_ctx(ctx, 0x402c20, 24); + else + if (dev_priv->chipset <= 0x4a) + cp_ctx(ctx, 0x402c20, 16); + else + cp_ctx(ctx, 0x402c20, 8); + cp_ctx(ctx, 0x402cb0, dev_priv->chipset == 0x40 ? 12 : 13); + gr_def(ctx, 0x402cd4, 0x00000005); + if (dev_priv->chipset != 0x40) + gr_def(ctx, 0x402ce0, 0x0000ffff); + break; + } + + cp_ctx(ctx, 0x403400, dev_priv->chipset == 0x40 ? 4 : 3); + cp_ctx(ctx, 0x403410, dev_priv->chipset == 0x40 ? 4 : 3); + cp_ctx(ctx, 0x403420, nv40_graph_vs_count(ctx->dev)); + for (i = 0; i < nv40_graph_vs_count(ctx->dev); i++) + gr_def(ctx, 0x403420 + (i * 4), 0x00005555); + + if (dev_priv->chipset != 0x40) { + cp_ctx(ctx, 0x403600, 1); + gr_def(ctx, 0x403600, 0x00000001); + } + cp_ctx(ctx, 0x403800, 1); + + cp_ctx(ctx, 0x403c18, 1); + gr_def(ctx, 0x403c18, 0x00000001); + switch (dev_priv->chipset) { + case 0x46: + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x405018, 1); + gr_def(ctx, 0x405018, 0x08e00001); + cp_ctx(ctx, 0x405c24, 1); + gr_def(ctx, 0x405c24, 0x000e3000); + break; + } + if (dev_priv->chipset != 0x4e) + cp_ctx(ctx, 0x405800, 11); + cp_ctx(ctx, 0x407000, 1); +} + +static void +nv40_graph_construct_state3d_3(struct nouveau_grctx *ctx) +{ + int len = nv40_graph_4097(ctx->dev) ? 0x0684 : 0x0084; + + cp_out (ctx, 0x300000); + cp_lsr (ctx, len - 4); + cp_bra (ctx, SWAP_DIRECTION, SAVE, cp_swap_state3d_3_is_save); + cp_lsr (ctx, len); + cp_name(ctx, cp_swap_state3d_3_is_save); + cp_out (ctx, 0x800001); + + ctx->ctxvals_pos += len; +} + +static void +nv40_graph_construct_shader(struct nouveau_grctx *ctx) +{ + struct drm_device *dev = ctx->dev; + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_gpuobj *obj = ctx->data; + int vs, vs_nr, vs_len, vs_nr_b0, vs_nr_b1, b0_offset, b1_offset; + int offset, i; + + vs_nr = nv40_graph_vs_count(ctx->dev); + vs_nr_b0 = 363; + vs_nr_b1 = dev_priv->chipset == 0x40 ? 128 : 64; + if (dev_priv->chipset == 0x40) { + b0_offset = 0x2200/4; /* 33a0 */ + b1_offset = 0x55a0/4; /* 1500 */ + vs_len = 0x6aa0/4; + } else + if (dev_priv->chipset == 0x41 || dev_priv->chipset == 0x42) { + b0_offset = 0x2200/4; /* 2200 */ + b1_offset = 0x4400/4; /* 0b00 */ + vs_len = 0x4f00/4; + } else { + b0_offset = 0x1d40/4; /* 2200 */ + b1_offset = 0x3f40/4; /* 0b00 : 0a40 */ + vs_len = nv40_graph_4097(dev) ? 0x4a40/4 : 0x4980/4; + } + + cp_lsr(ctx, vs_len * vs_nr + 0x300/4); + cp_out(ctx, nv40_graph_4097(dev) ? 0x800041 : 0x800029); + + offset = ctx->ctxvals_pos; + ctx->ctxvals_pos += (0x0300/4 + (vs_nr * vs_len)); + + if (ctx->mode != NOUVEAU_GRCTX_VALS) + return; + + offset += 0x0280/4; + for (i = 0; i < 16; i++, offset += 2) + nv_wo32(dev, obj, offset, 0x3f800000); + + for (vs = 0; vs < vs_nr; vs++, offset += vs_len) { + for (i = 0; i < vs_nr_b0 * 6; i += 6) + nv_wo32(dev, obj, offset + b0_offset + i, 0x00000001); + for (i = 0; i < vs_nr_b1 * 4; i += 4) + nv_wo32(dev, obj, offset + b1_offset + i, 0x3f800000); + } +} + +void +nv40_grctx_init(struct nouveau_grctx *ctx) +{ + /* decide whether we're loading/unloading the context */ + cp_bra (ctx, AUTO_SAVE, PENDING, cp_setup_save); + cp_bra (ctx, USER_SAVE, PENDING, cp_setup_save); + + cp_name(ctx, cp_check_load); + cp_bra (ctx, AUTO_LOAD, PENDING, cp_setup_auto_load); + cp_bra (ctx, USER_LOAD, PENDING, cp_setup_load); + cp_bra (ctx, ALWAYS, TRUE, cp_exit); + + /* setup for context load */ + cp_name(ctx, cp_setup_auto_load); + cp_wait(ctx, STATUS, IDLE); + cp_out (ctx, CP_NEXT_TO_SWAP); + cp_name(ctx, cp_setup_load); + cp_wait(ctx, STATUS, IDLE); + cp_set (ctx, SWAP_DIRECTION, LOAD); + cp_out (ctx, 0x00910880); /* ?? */ + cp_out (ctx, 0x00901ffe); /* ?? */ + cp_out (ctx, 0x01940000); /* ?? */ + cp_lsr (ctx, 0x20); + cp_out (ctx, 0x0060000b); /* ?? */ + cp_wait(ctx, UNK57, CLEAR); + cp_out (ctx, 0x0060000c); /* ?? */ + cp_bra (ctx, ALWAYS, TRUE, cp_swap_state); + + /* setup for context save */ + cp_name(ctx, cp_setup_save); + cp_set (ctx, SWAP_DIRECTION, SAVE); + + /* general PGRAPH state */ + cp_name(ctx, cp_swap_state); + cp_pos (ctx, 0x00020/4); + nv40_graph_construct_general(ctx); + cp_wait(ctx, STATUS, IDLE); + + /* 3D state, block 1 */ + cp_bra (ctx, UNK54, CLEAR, cp_prepare_exit); + nv40_graph_construct_state3d(ctx); + cp_wait(ctx, STATUS, IDLE); + + /* 3D state, block 2 */ + nv40_graph_construct_state3d_2(ctx); + + /* Some other block of "random" state */ + nv40_graph_construct_state3d_3(ctx); + + /* Per-vertex shader state */ + cp_pos (ctx, ctx->ctxvals_pos); + nv40_graph_construct_shader(ctx); + + /* pre-exit state updates */ + cp_name(ctx, cp_prepare_exit); + cp_bra (ctx, SWAP_DIRECTION, SAVE, cp_check_load); + cp_bra (ctx, USER_SAVE, PENDING, cp_exit); + cp_out (ctx, CP_NEXT_TO_CURRENT); + + cp_name(ctx, cp_exit); + cp_set (ctx, USER_SAVE, NOT_PENDING); + cp_set (ctx, USER_LOAD, NOT_PENDING); + cp_out (ctx, CP_END); +} + diff --git a/drivers/gpu/drm/nouveau/nv50_crtc.c b/drivers/gpu/drm/nouveau/nv50_crtc.c index f8e28a1e44e..118d3285fd8 100644 --- a/drivers/gpu/drm/nouveau/nv50_crtc.c +++ b/drivers/gpu/drm/nouveau/nv50_crtc.c @@ -45,7 +45,7 @@ nv50_crtc_lut_load(struct drm_crtc *crtc) void __iomem *lut = nvbo_kmap_obj_iovirtual(nv_crtc->lut.nvbo); int i; - NV_DEBUG(crtc->dev, "\n"); + NV_DEBUG_KMS(crtc->dev, "\n"); for (i = 0; i < 256; i++) { writew(nv_crtc->lut.r[i] >> 2, lut + 8*i + 0); @@ -68,8 +68,8 @@ nv50_crtc_blank(struct nouveau_crtc *nv_crtc, bool blanked) struct nouveau_channel *evo = dev_priv->evo; int index = nv_crtc->index, ret; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); - NV_DEBUG(dev, "%s\n", blanked ? "blanked" : "unblanked"); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "%s\n", blanked ? "blanked" : "unblanked"); if (blanked) { nv_crtc->cursor.hide(nv_crtc, false); @@ -139,7 +139,7 @@ nv50_crtc_set_dither(struct nouveau_crtc *nv_crtc, bool on, bool update) struct nouveau_channel *evo = dev_priv->evo; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); ret = RING_SPACE(evo, 2 + (update ? 2 : 0)); if (ret) { @@ -193,7 +193,7 @@ nv50_crtc_set_scale(struct nouveau_crtc *nv_crtc, int scaling_mode, bool update) uint32_t outX, outY, horiz, vert; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); switch (scaling_mode) { case DRM_MODE_SCALE_NONE: @@ -301,7 +301,7 @@ nv50_crtc_destroy(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (!crtc) return; @@ -433,7 +433,7 @@ nv50_crtc_prepare(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_encoder *encoder; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); /* Disconnect all unused encoders. */ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { @@ -458,7 +458,7 @@ nv50_crtc_commit(struct drm_crtc *crtc) struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); int ret; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); nv50_crtc_blank(nv_crtc, false); @@ -497,7 +497,7 @@ nv50_crtc_do_mode_set_base(struct drm_crtc *crtc, int x, int y, struct nouveau_framebuffer *fb = nouveau_framebuffer(drm_fb); int ret, format; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); switch (drm_fb->depth) { case 8: @@ -612,7 +612,7 @@ nv50_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, *nv_crtc->mode = *adjusted_mode; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); hsync_dur = adjusted_mode->hsync_end - adjusted_mode->hsync_start; vsync_dur = adjusted_mode->vsync_end - adjusted_mode->vsync_start; @@ -706,7 +706,7 @@ nv50_crtc_create(struct drm_device *dev, int index) struct nouveau_crtc *nv_crtc = NULL; int ret, i; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); nv_crtc = kzalloc(sizeof(*nv_crtc), GFP_KERNEL); if (!nv_crtc) diff --git a/drivers/gpu/drm/nouveau/nv50_cursor.c b/drivers/gpu/drm/nouveau/nv50_cursor.c index e2e79a8f220..753e723adb3 100644 --- a/drivers/gpu/drm/nouveau/nv50_cursor.c +++ b/drivers/gpu/drm/nouveau/nv50_cursor.c @@ -41,7 +41,7 @@ nv50_cursor_show(struct nouveau_crtc *nv_crtc, bool update) struct drm_device *dev = nv_crtc->base.dev; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (update && nv_crtc->cursor.visible) return; @@ -76,7 +76,7 @@ nv50_cursor_hide(struct nouveau_crtc *nv_crtc, bool update) struct drm_device *dev = nv_crtc->base.dev; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (update && !nv_crtc->cursor.visible) return; @@ -116,7 +116,7 @@ nv50_cursor_set_pos(struct nouveau_crtc *nv_crtc, int x, int y) static void nv50_cursor_set_offset(struct nouveau_crtc *nv_crtc, uint32_t offset) { - NV_DEBUG(nv_crtc->base.dev, "\n"); + NV_DEBUG_KMS(nv_crtc->base.dev, "\n"); if (offset == nv_crtc->cursor.offset) return; @@ -143,7 +143,7 @@ nv50_cursor_fini(struct nouveau_crtc *nv_crtc) struct drm_device *dev = nv_crtc->base.dev; int idx = nv_crtc->index; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); nv_wr32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(idx), 0); if (!nv_wait(NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(idx), diff --git a/drivers/gpu/drm/nouveau/nv50_dac.c b/drivers/gpu/drm/nouveau/nv50_dac.c index fb5838e3be2..f08f042a8e1 100644 --- a/drivers/gpu/drm/nouveau/nv50_dac.c +++ b/drivers/gpu/drm/nouveau/nv50_dac.c @@ -44,7 +44,7 @@ nv50_dac_disconnect(struct nouveau_encoder *nv_encoder) struct nouveau_channel *evo = dev_priv->evo; int ret; - NV_DEBUG(dev, "Disconnecting DAC %d\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "Disconnecting DAC %d\n", nv_encoder->or); ret = RING_SPACE(evo, 2); if (ret) { @@ -81,11 +81,11 @@ nv50_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) /* Use bios provided value if possible. */ if (dev_priv->vbios->dactestval) { load_pattern = dev_priv->vbios->dactestval; - NV_DEBUG(dev, "Using bios provided load_pattern of %d\n", + NV_DEBUG_KMS(dev, "Using bios provided load_pattern of %d\n", load_pattern); } else { load_pattern = 340; - NV_DEBUG(dev, "Using default load_pattern of %d\n", + NV_DEBUG_KMS(dev, "Using default load_pattern of %d\n", load_pattern); } @@ -103,9 +103,9 @@ nv50_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) status = connector_status_connected; if (status == connector_status_connected) - NV_DEBUG(dev, "Load was detected on output with or %d\n", or); + NV_DEBUG_KMS(dev, "Load was detected on output with or %d\n", or); else - NV_DEBUG(dev, "Load was not detected on output with or %d\n", or); + NV_DEBUG_KMS(dev, "Load was not detected on output with or %d\n", or); return status; } @@ -118,7 +118,7 @@ nv50_dac_dpms(struct drm_encoder *encoder, int mode) uint32_t val; int or = nv_encoder->or; - NV_DEBUG(dev, "or %d mode %d\n", or, mode); + NV_DEBUG_KMS(dev, "or %d mode %d\n", or, mode); /* wait for it to be done */ if (!nv_wait(NV50_PDISPLAY_DAC_DPMS_CTRL(or), @@ -173,7 +173,7 @@ nv50_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); struct nouveau_connector *connector; - NV_DEBUG(encoder->dev, "or %d\n", nv_encoder->or); + NV_DEBUG_KMS(encoder->dev, "or %d\n", nv_encoder->or); connector = nouveau_encoder_connector_get(nv_encoder); if (!connector) { @@ -213,7 +213,7 @@ nv50_dac_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, uint32_t mode_ctl = 0, mode_ctl2 = 0; int ret; - NV_DEBUG(dev, "or %d\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "or %d\n", nv_encoder->or); nv50_dac_dpms(encoder, DRM_MODE_DPMS_ON); @@ -264,7 +264,7 @@ nv50_dac_destroy(struct drm_encoder *encoder) if (!encoder) return; - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); kfree(nv_encoder); @@ -280,7 +280,7 @@ nv50_dac_create(struct drm_device *dev, struct dcb_entry *entry) struct nouveau_encoder *nv_encoder; struct drm_encoder *encoder; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); NV_INFO(dev, "Detected a DAC output\n"); nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL); diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index 12c5ee63495..a9263d92a23 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -188,7 +188,7 @@ nv50_display_init(struct drm_device *dev) uint64_t start; int ret, i; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); nv_wr32(dev, 0x00610184, nv_rd32(dev, 0x00614004)); /* @@ -232,7 +232,7 @@ nv50_display_init(struct drm_device *dev) nv_wr32(dev, NV50_PDISPLAY_UNK_380, 0); /* RAM is clamped to 256 MiB. */ ram_amount = nouveau_mem_fb_amount(dev); - NV_DEBUG(dev, "ram_amount %d\n", ram_amount); + NV_DEBUG_KMS(dev, "ram_amount %d\n", ram_amount); if (ram_amount > 256*1024*1024) ram_amount = 256*1024*1024; nv_wr32(dev, NV50_PDISPLAY_RAM_AMOUNT, ram_amount - 1); @@ -398,7 +398,7 @@ static int nv50_display_disable(struct drm_device *dev) struct drm_crtc *drm_crtc; int ret, i; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); list_for_each_entry(drm_crtc, &dev->mode_config.crtc_list, head) { struct nouveau_crtc *crtc = nouveau_crtc(drm_crtc); @@ -469,7 +469,7 @@ int nv50_display_create(struct drm_device *dev) uint32_t connector[16] = {}; int ret, i; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); /* init basic kernel modesetting */ drm_mode_config_init(dev); @@ -573,7 +573,7 @@ int nv50_display_destroy(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); drm_mode_config_cleanup(dev); @@ -617,7 +617,7 @@ nv50_display_irq_head(struct drm_device *dev, int *phead, * CRTC separately, and submission will be blocked by the GPU * until we handle each in turn. */ - NV_DEBUG(dev, "0x610030: 0x%08x\n", unk30); + NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30); head = ffs((unk30 >> 9) & 3) - 1; if (head < 0) return -EINVAL; @@ -661,7 +661,7 @@ nv50_display_irq_head(struct drm_device *dev, int *phead, or = i; } - NV_DEBUG(dev, "type %d, or %d\n", type, or); + NV_DEBUG_KMS(dev, "type %d, or %d\n", type, or); if (type == OUTPUT_ANY) { NV_ERROR(dev, "unknown encoder!!\n"); return -1; @@ -811,7 +811,7 @@ nv50_display_unk20_handler(struct drm_device *dev) pclk = nv_rd32(dev, NV50_PDISPLAY_CRTC_P(head, CLOCK)) & 0x3fffff; script = nv50_display_script_select(dev, dcbent, pclk); - NV_DEBUG(dev, "head %d pxclk: %dKHz\n", head, pclk); + NV_DEBUG_KMS(dev, "head %d pxclk: %dKHz\n", head, pclk); if (dcbent->type != OUTPUT_DP) nouveau_bios_run_display_table(dev, dcbent, 0, -2); @@ -870,7 +870,7 @@ nv50_display_irq_handler_bh(struct work_struct *work) uint32_t intr0 = nv_rd32(dev, NV50_PDISPLAY_INTR_0); uint32_t intr1 = nv_rd32(dev, NV50_PDISPLAY_INTR_1); - NV_DEBUG(dev, "PDISPLAY_INTR_BH 0x%08x 0x%08x\n", intr0, intr1); + NV_DEBUG_KMS(dev, "PDISPLAY_INTR_BH 0x%08x 0x%08x\n", intr0, intr1); if (intr1 & NV50_PDISPLAY_INTR_1_CLK_UNK10) nv50_display_unk10_handler(dev); @@ -974,7 +974,7 @@ nv50_display_irq_handler(struct drm_device *dev) uint32_t intr1 = nv_rd32(dev, NV50_PDISPLAY_INTR_1); uint32_t clock; - NV_DEBUG(dev, "PDISPLAY_INTR 0x%08x 0x%08x\n", intr0, intr1); + NV_DEBUG_KMS(dev, "PDISPLAY_INTR 0x%08x 0x%08x\n", intr0, intr1); if (!intr0 && !(intr1 & ~delayed)) break; diff --git a/drivers/gpu/drm/nouveau/nv50_fifo.c b/drivers/gpu/drm/nouveau/nv50_fifo.c index 77ae1aaa0bc..b7282284f08 100644 --- a/drivers/gpu/drm/nouveau/nv50_fifo.c +++ b/drivers/gpu/drm/nouveau/nv50_fifo.c @@ -416,7 +416,7 @@ nv50_fifo_unload_context(struct drm_device *dev) NV_DEBUG(dev, "\n"); chid = pfifo->channel_id(dev); - if (chid < 0 || chid >= dev_priv->engine.fifo.channels) + if (chid < 1 || chid >= dev_priv->engine.fifo.channels - 1) return 0; chan = dev_priv->fifos[chid]; diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c index 177d8229336..ca79f32be44 100644 --- a/drivers/gpu/drm/nouveau/nv50_graph.c +++ b/drivers/gpu/drm/nouveau/nv50_graph.c @@ -107,9 +107,13 @@ nv50_graph_init_regs(struct drm_device *dev) static int nv50_graph_init_ctxctl(struct drm_device *dev) { + struct drm_nouveau_private *dev_priv = dev->dev_private; + NV_DEBUG(dev, "\n"); - nv40_grctx_init(dev); + nouveau_grctx_prog_load(dev); + if (!dev_priv->engine.graph.ctxprog) + dev_priv->engine.graph.accel_blocked = true; nv_wr32(dev, 0x400320, 4); nv_wr32(dev, NV40_PGRAPH_CTXCTL_CUR, 0); @@ -140,7 +144,7 @@ void nv50_graph_takedown(struct drm_device *dev) { NV_DEBUG(dev, "\n"); - nv40_grctx_fini(dev); + nouveau_grctx_fini(dev); } void @@ -207,7 +211,7 @@ nv50_graph_create_context(struct nouveau_channel *chan) dev_priv->engine.instmem.finish_access(dev); dev_priv->engine.instmem.prepare_access(dev, true); - nv40_grctx_vals_load(dev, ctx); + nouveau_grctx_vals_load(dev, ctx); nv_wo32(dev, ctx, 0x00000/4, chan->ramin->instance >> 12); if ((dev_priv->chipset & 0xf0) == 0xa0) nv_wo32(dev, ctx, 0x00004/4, 0x00000000); diff --git a/drivers/gpu/drm/nouveau/nv50_sor.c b/drivers/gpu/drm/nouveau/nv50_sor.c index 8c280463a66..e395c16d30f 100644 --- a/drivers/gpu/drm/nouveau/nv50_sor.c +++ b/drivers/gpu/drm/nouveau/nv50_sor.c @@ -44,7 +44,7 @@ nv50_sor_disconnect(struct nouveau_encoder *nv_encoder) struct nouveau_channel *evo = dev_priv->evo; int ret; - NV_DEBUG(dev, "Disconnecting SOR %d\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "Disconnecting SOR %d\n", nv_encoder->or); ret = RING_SPACE(evo, 2); if (ret) { @@ -70,7 +70,7 @@ nv50_sor_dp_link_train(struct drm_encoder *encoder) } if (dpe->script0) { - NV_DEBUG(dev, "SOR-%d: running DP script 0\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "SOR-%d: running DP script 0\n", nv_encoder->or); nouveau_bios_run_init_table(dev, le16_to_cpu(dpe->script0), nv_encoder->dcb); } @@ -79,7 +79,7 @@ nv50_sor_dp_link_train(struct drm_encoder *encoder) NV_ERROR(dev, "SOR-%d: link training failed\n", nv_encoder->or); if (dpe->script1) { - NV_DEBUG(dev, "SOR-%d: running DP script 1\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "SOR-%d: running DP script 1\n", nv_encoder->or); nouveau_bios_run_init_table(dev, le16_to_cpu(dpe->script1), nv_encoder->dcb); } @@ -93,7 +93,7 @@ nv50_sor_dpms(struct drm_encoder *encoder, int mode) uint32_t val; int or = nv_encoder->or; - NV_DEBUG(dev, "or %d mode %d\n", or, mode); + NV_DEBUG_KMS(dev, "or %d mode %d\n", or, mode); /* wait for it to be done */ if (!nv_wait(NV50_PDISPLAY_SOR_DPMS_CTRL(or), @@ -142,7 +142,7 @@ nv50_sor_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); struct nouveau_connector *connector; - NV_DEBUG(encoder->dev, "or %d\n", nv_encoder->or); + NV_DEBUG_KMS(encoder->dev, "or %d\n", nv_encoder->or); connector = nouveau_encoder_connector_get(nv_encoder); if (!connector) { @@ -182,7 +182,7 @@ nv50_sor_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, uint32_t mode_ctl = 0; int ret; - NV_DEBUG(dev, "or %d\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "or %d\n", nv_encoder->or); nv50_sor_dpms(encoder, DRM_MODE_DPMS_ON); @@ -246,7 +246,7 @@ nv50_sor_destroy(struct drm_encoder *encoder) if (!encoder) return; - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); @@ -265,7 +265,7 @@ nv50_sor_create(struct drm_device *dev, struct dcb_entry *entry) bool dum; int type; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); switch (entry->type) { case OUTPUT_TMDS: diff --git a/drivers/gpu/drm/r128/r128_drv.c b/drivers/gpu/drm/r128/r128_drv.c index 601f4c0e5da..b806fdcc717 100644 --- a/drivers/gpu/drm/r128/r128_drv.c +++ b/drivers/gpu/drm/r128/r128_drv.c @@ -64,7 +64,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/r128/r128_ioc32.c b/drivers/gpu/drm/r128/r128_ioc32.c index d3cb676eee8..51c99fc4dd3 100644 --- a/drivers/gpu/drm/r128/r128_ioc32.c +++ b/drivers/gpu/drm/r128/r128_ioc32.c @@ -95,8 +95,7 @@ static int compat_r128_init(struct file *file, unsigned int cmd, &init->agp_textures_offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_R128_INIT, (unsigned long)init); + return drm_ioctl(file, DRM_IOCTL_R128_INIT, (unsigned long)init); } typedef struct drm_r128_depth32 { @@ -129,8 +128,7 @@ static int compat_r128_depth(struct file *file, unsigned int cmd, &depth->mask)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_R128_DEPTH, (unsigned long)depth); + return drm_ioctl(file, DRM_IOCTL_R128_DEPTH, (unsigned long)depth); } @@ -153,8 +151,7 @@ static int compat_r128_stipple(struct file *file, unsigned int cmd, &stipple->mask)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_R128_STIPPLE, (unsigned long)stipple); + return drm_ioctl(file, DRM_IOCTL_R128_STIPPLE, (unsigned long)stipple); } typedef struct drm_r128_getparam32 { @@ -178,8 +175,7 @@ static int compat_r128_getparam(struct file *file, unsigned int cmd, &getparam->value)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_R128_GETPARAM, (unsigned long)getparam); + return drm_ioctl(file, DRM_IOCTL_R128_GETPARAM, (unsigned long)getparam); } drm_ioctl_compat_t *r128_compat_ioctls[] = { @@ -210,12 +206,10 @@ long r128_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(r128_compat_ioctls)) fn = r128_compat_ioctls[nr - DRM_COMMAND_BASE]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index 6578d19dff9..388140a7e65 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -58,6 +58,7 @@ typedef struct { } atom_exec_context; int atom_debug = 0; +static void atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params); void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params); static uint32_t atom_arg_mask[8] = @@ -573,7 +574,7 @@ static void atom_op_calltable(atom_exec_context *ctx, int *ptr, int arg) else SDEBUG(" table: %d\n", idx); if (U16(ctx->ctx->cmd_table + 4 + 2 * idx)) - atom_execute_table(ctx->ctx, idx, ctx->ps + ctx->ps_shift); + atom_execute_table_locked(ctx->ctx, idx, ctx->ps + ctx->ps_shift); } static void atom_op_clear(atom_exec_context *ctx, int *ptr, int arg) @@ -1040,7 +1041,7 @@ static struct { atom_op_shr, ATOM_ARG_MC}, { atom_op_debug, 0},}; -void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params) +static void atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params) { int base = CU16(ctx->cmd_table + 4 + 2 * index); int len, ws, ps, ptr; @@ -1092,6 +1093,13 @@ void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params) kfree(ectx.ws); } +void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params) +{ + mutex_lock(&ctx->mutex); + atom_execute_table_locked(ctx, index, params); + mutex_unlock(&ctx->mutex); +} + static int atom_iio_len[] = { 1, 2, 3, 3, 3, 3, 4, 4, 4, 3 }; static void atom_index_iio(struct atom_context *ctx, int base) diff --git a/drivers/gpu/drm/radeon/atom.h b/drivers/gpu/drm/radeon/atom.h index 6671848e5ea..47fd943f6d1 100644 --- a/drivers/gpu/drm/radeon/atom.h +++ b/drivers/gpu/drm/radeon/atom.h @@ -120,6 +120,7 @@ struct card_info { struct atom_context { struct card_info *card; + struct mutex mutex; void *bios; uint32_t cmd_table, data_table; uint16_t *iio; diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 5f48515c77a..91ad0d1c1b1 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -4690,6 +4690,205 @@ typedef struct _ATOM_POWERPLAY_INFO_V3 { ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; } ATOM_POWERPLAY_INFO_V3; +/* New PPlib */ +/**************************************************************************/ +typedef struct _ATOM_PPLIB_THERMALCONTROLLER + +{ + UCHAR ucType; // one of ATOM_PP_THERMALCONTROLLER_* + UCHAR ucI2cLine; // as interpreted by DAL I2C + UCHAR ucI2cAddress; + UCHAR ucFanParameters; // Fan Control Parameters. + UCHAR ucFanMinRPM; // Fan Minimum RPM (hundreds) -- for display purposes only. + UCHAR ucFanMaxRPM; // Fan Maximum RPM (hundreds) -- for display purposes only. + UCHAR ucReserved; // ---- + UCHAR ucFlags; // to be defined +} ATOM_PPLIB_THERMALCONTROLLER; + +#define ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK 0x0f +#define ATOM_PP_FANPARAMETERS_NOFAN 0x80 // No fan is connected to this controller. + +#define ATOM_PP_THERMALCONTROLLER_NONE 0 +#define ATOM_PP_THERMALCONTROLLER_LM63 1 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_ADM1032 2 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_ADM1030 3 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_MUA6649 4 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_LM64 5 +#define ATOM_PP_THERMALCONTROLLER_F75375 6 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_RV6xx 7 +#define ATOM_PP_THERMALCONTROLLER_RV770 8 +#define ATOM_PP_THERMALCONTROLLER_ADT7473 9 + +typedef struct _ATOM_PPLIB_STATE +{ + UCHAR ucNonClockStateIndex; + UCHAR ucClockStateIndices[1]; // variable-sized +} ATOM_PPLIB_STATE; + +//// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps +#define ATOM_PP_PLATFORM_CAP_BACKBIAS 1 +#define ATOM_PP_PLATFORM_CAP_POWERPLAY 2 +#define ATOM_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 4 +#define ATOM_PP_PLATFORM_CAP_ASPM_L0s 8 +#define ATOM_PP_PLATFORM_CAP_ASPM_L1 16 +#define ATOM_PP_PLATFORM_CAP_HARDWAREDC 32 +#define ATOM_PP_PLATFORM_CAP_GEMINIPRIMARY 64 +#define ATOM_PP_PLATFORM_CAP_STEPVDDC 128 +#define ATOM_PP_PLATFORM_CAP_VOLTAGECONTROL 256 +#define ATOM_PP_PLATFORM_CAP_SIDEPORTCONTROL 512 +#define ATOM_PP_PLATFORM_CAP_TURNOFFPLL_ASPML1 1024 +#define ATOM_PP_PLATFORM_CAP_HTLINKCONTROL 2048 + +typedef struct _ATOM_PPLIB_POWERPLAYTABLE +{ + ATOM_COMMON_TABLE_HEADER sHeader; + + UCHAR ucDataRevision; + + UCHAR ucNumStates; + UCHAR ucStateEntrySize; + UCHAR ucClockInfoSize; + UCHAR ucNonClockSize; + + // offset from start of this table to array of ucNumStates ATOM_PPLIB_STATE structures + USHORT usStateArrayOffset; + + // offset from start of this table to array of ASIC-specific structures, + // currently ATOM_PPLIB_CLOCK_INFO. + USHORT usClockInfoArrayOffset; + + // offset from start of this table to array of ATOM_PPLIB_NONCLOCK_INFO + USHORT usNonClockInfoArrayOffset; + + USHORT usBackbiasTime; // in microseconds + USHORT usVoltageTime; // in microseconds + USHORT usTableSize; //the size of this structure, or the extended structure + + ULONG ulPlatformCaps; // See ATOM_PPLIB_CAPS_* + + ATOM_PPLIB_THERMALCONTROLLER sThermalController; + + USHORT usBootClockInfoOffset; + USHORT usBootNonClockInfoOffset; + +} ATOM_PPLIB_POWERPLAYTABLE; + +//// ATOM_PPLIB_NONCLOCK_INFO::usClassification +#define ATOM_PPLIB_CLASSIFICATION_UI_MASK 0x0007 +#define ATOM_PPLIB_CLASSIFICATION_UI_SHIFT 0 +#define ATOM_PPLIB_CLASSIFICATION_UI_NONE 0 +#define ATOM_PPLIB_CLASSIFICATION_UI_BATTERY 1 +#define ATOM_PPLIB_CLASSIFICATION_UI_BALANCED 3 +#define ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE 5 +// 2, 4, 6, 7 are reserved + +#define ATOM_PPLIB_CLASSIFICATION_BOOT 0x0008 +#define ATOM_PPLIB_CLASSIFICATION_THERMAL 0x0010 +#define ATOM_PPLIB_CLASSIFICATION_LIMITEDPOWERSOURCE 0x0020 +#define ATOM_PPLIB_CLASSIFICATION_REST 0x0040 +#define ATOM_PPLIB_CLASSIFICATION_FORCED 0x0080 +#define ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE 0x0100 +#define ATOM_PPLIB_CLASSIFICATION_OVERDRIVETEMPLATE 0x0200 +#define ATOM_PPLIB_CLASSIFICATION_UVDSTATE 0x0400 +#define ATOM_PPLIB_CLASSIFICATION_3DLOW 0x0800 +#define ATOM_PPLIB_CLASSIFICATION_ACPI 0x1000 +// remaining 3 bits are reserved + +//// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings +#define ATOM_PPLIB_SINGLE_DISPLAY_ONLY 0x00000001 +#define ATOM_PPLIB_SUPPORTS_VIDEO_PLAYBACK 0x00000002 + +// 0 is 2.5Gb/s, 1 is 5Gb/s +#define ATOM_PPLIB_PCIE_LINK_SPEED_MASK 0x00000004 +#define ATOM_PPLIB_PCIE_LINK_SPEED_SHIFT 2 + +// lanes - 1: 1, 2, 4, 8, 12, 16 permitted by PCIE spec +#define ATOM_PPLIB_PCIE_LINK_WIDTH_MASK 0x000000F8 +#define ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT 3 + +// lookup into reduced refresh-rate table +#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_MASK 0x00000F00 +#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_SHIFT 8 + +#define ATOM_PPLIB_LIMITED_REFRESHRATE_UNLIMITED 0 +#define ATOM_PPLIB_LIMITED_REFRESHRATE_50HZ 1 +// 2-15 TBD as needed. + +#define ATOM_PPLIB_SOFTWARE_DISABLE_LOADBALANCING 0x00001000 +#define ATOM_PPLIB_SOFTWARE_ENABLE_SLEEP_FOR_TIMESTAMPS 0x00002000 +#define ATOM_PPLIB_ENABLE_VARIBRIGHT 0x00008000 + +#define ATOM_PPLIB_DISALLOW_ON_DC 0x00004000 + +// Contained in an array starting at the offset +// in ATOM_PPLIB_POWERPLAYTABLE::usNonClockInfoArrayOffset. +// referenced from ATOM_PPLIB_STATE_INFO::ucNonClockStateIndex +typedef struct _ATOM_PPLIB_NONCLOCK_INFO +{ + USHORT usClassification; + UCHAR ucMinTemperature; + UCHAR ucMaxTemperature; + ULONG ulCapsAndSettings; + UCHAR ucRequiredPower; + UCHAR ucUnused1[3]; +} ATOM_PPLIB_NONCLOCK_INFO; + +// Contained in an array starting at the offset +// in ATOM_PPLIB_POWERPLAYTABLE::usClockInfoArrayOffset. +// referenced from ATOM_PPLIB_STATE::ucClockStateIndices +typedef struct _ATOM_PPLIB_R600_CLOCK_INFO +{ + USHORT usEngineClockLow; + UCHAR ucEngineClockHigh; + + USHORT usMemoryClockLow; + UCHAR ucMemoryClockHigh; + + USHORT usVDDC; + USHORT usUnused1; + USHORT usUnused2; + + ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_* + +} ATOM_PPLIB_R600_CLOCK_INFO; + +// ulFlags in ATOM_PPLIB_R600_CLOCK_INFO +#define ATOM_PPLIB_R600_FLAGS_PCIEGEN2 1 +#define ATOM_PPLIB_R600_FLAGS_UVDSAFE 2 +#define ATOM_PPLIB_R600_FLAGS_BACKBIASENABLE 4 +#define ATOM_PPLIB_R600_FLAGS_MEMORY_ODT_OFF 8 +#define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF 16 + +typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO + +{ + USHORT usLowEngineClockLow; // Low Engine clock in MHz (the same way as on the R600). + UCHAR ucLowEngineClockHigh; + USHORT usHighEngineClockLow; // High Engine clock in MHz. + UCHAR ucHighEngineClockHigh; + USHORT usMemoryClockLow; // For now one of the ATOM_PPLIB_RS780_SPMCLK_XXXX constants. + UCHAR ucMemoryClockHigh; // Currentyl unused. + UCHAR ucPadding; // For proper alignment and size. + USHORT usVDDC; // For the 780, use: None, Low, High, Variable + UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16} + UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requriement. + USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200). + ULONG ulFlags; +} ATOM_PPLIB_RS780_CLOCK_INFO; + +#define ATOM_PPLIB_RS780_VOLTAGE_NONE 0 +#define ATOM_PPLIB_RS780_VOLTAGE_LOW 1 +#define ATOM_PPLIB_RS780_VOLTAGE_HIGH 2 +#define ATOM_PPLIB_RS780_VOLTAGE_VARIABLE 3 + +#define ATOM_PPLIB_RS780_SPMCLK_NONE 0 // We cannot change the side port memory clock, leave it as it is. +#define ATOM_PPLIB_RS780_SPMCLK_LOW 1 +#define ATOM_PPLIB_RS780_SPMCLK_HIGH 2 + +#define ATOM_PPLIB_RS780_HTLINKFREQ_NONE 0 +#define ATOM_PPLIB_RS780_HTLINKFREQ_LOW 1 +#define ATOM_PPLIB_RS780_HTLINKFREQ_HIGH 2 + /**************************************************************************/ /* Following definitions are for compatiblity issue in different SW components. */ diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 84e5df766d3..71727460968 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2881,6 +2881,10 @@ int r100_cs_track_check(struct radeon_device *rdev, struct r100_cs_track *track) for (i = 0; i < track->num_cb; i++) { if (track->cb[i].robj == NULL) { + if (!(track->fastfill || track->color_channel_mask || + track->blend_read_enable)) { + continue; + } DRM_ERROR("[drm] No buffer for color buffer %d !\n", i); return -EINVAL; } diff --git a/drivers/gpu/drm/radeon/r100_track.h b/drivers/gpu/drm/radeon/r100_track.h index 7188c3778ee..b27a6999d21 100644 --- a/drivers/gpu/drm/radeon/r100_track.h +++ b/drivers/gpu/drm/radeon/r100_track.h @@ -67,13 +67,15 @@ struct r100_cs_track { unsigned immd_dwords; unsigned num_arrays; unsigned max_indx; + unsigned color_channel_mask; struct r100_cs_track_array arrays[11]; struct r100_cs_track_cb cb[R300_MAX_CB]; struct r100_cs_track_cb zb; struct r100_cs_track_texture textures[R300_TRACK_MAX_TEXTURE]; bool z_enabled; bool separate_cube; - + bool fastfill; + bool blend_read_enable; }; int r100_cs_track_check(struct radeon_device *rdev, struct r100_cs_track *track); diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 83490c2b506..3f2cc9e2e8d 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -887,6 +887,14 @@ static int r300_packet0_check(struct radeon_cs_parser *p, track->textures[i].cpp = 1; track->textures[i].compress_format = R100_TRACK_COMP_DXT1; break; + case R300_TX_FORMAT_ATI2N: + if (p->rdev->family < CHIP_R420) { + DRM_ERROR("Invalid texture format %u\n", + (idx_value & 0x1F)); + return -EINVAL; + } + /* The same rules apply as for DXT3/5. */ + /* Pass through. */ case R300_TX_FORMAT_DXT3: case R300_TX_FORMAT_DXT5: track->textures[i].cpp = 1; @@ -951,6 +959,16 @@ static int r300_packet0_check(struct radeon_cs_parser *p, track->textures[i].width_11 = tmp; tmp = ((idx_value >> 16) & 1) << 11; track->textures[i].height_11 = tmp; + + /* ATI1N */ + if (idx_value & (1 << 14)) { + /* The same rules apply as for DXT1. */ + track->textures[i].compress_format = + R100_TRACK_COMP_DXT1; + } + } else if (idx_value & (1 << 14)) { + DRM_ERROR("Forbidden bit TXFORMAT_MSB\n"); + return -EINVAL; } break; case 0x4480: @@ -992,6 +1010,18 @@ static int r300_packet0_check(struct radeon_cs_parser *p, } ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); break; + case 0x4e0c: + /* RB3D_COLOR_CHANNEL_MASK */ + track->color_channel_mask = idx_value; + break; + case 0x4d1c: + /* ZB_BW_CNTL */ + track->fastfill = !!(idx_value & (1 << 2)); + break; + case 0x4e04: + /* RB3D_BLENDCNTL */ + track->blend_read_enable = !!(idx_value & (1 << 2)); + break; case 0x4be8: /* valid register only on RV530 */ if (p->rdev->family == CHIP_RV530) diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c index cb2e470f97d..34bffa0e4b7 100644 --- a/drivers/gpu/drm/radeon/r300_cmdbuf.c +++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c @@ -990,7 +990,7 @@ static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv, int sz; int addr; int type; - int clamp; + int isclamp; int stride; RING_LOCALS; @@ -999,10 +999,10 @@ static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv, addr = ((header.r500fp.adrhi_flags & 1) << 8) | header.r500fp.adrlo; type = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_TYPE); - clamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP); + isclamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP); addr |= (type << 16); - addr |= (clamp << 17); + addr |= (isclamp << 17); stride = type ? 4 : 6; diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h index 4b7afef35a6..1735a2b6958 100644 --- a/drivers/gpu/drm/radeon/r300_reg.h +++ b/drivers/gpu/drm/radeon/r300_reg.h @@ -900,6 +900,7 @@ # define R300_TX_FORMAT_FL_I32 0x1B # define R300_TX_FORMAT_FL_I32A32 0x1C # define R300_TX_FORMAT_FL_R32G32B32A32 0x1D +# define R300_TX_FORMAT_ATI2N 0x1F /* alpha modes, convenience mostly */ /* if you have alpha, pick constant appropriate to the number of channels (1 for I8, 2 for I8A8, 4 for R8G8B8A8, etc */ diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 0d820764f34..44060b92d9e 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -170,7 +170,7 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p, idx, relocs_chunk->length_dw); return -EINVAL; } - *cs_reloc = &p->relocs[0]; + *cs_reloc = p->relocs; (*cs_reloc)->lobj.gpu_offset = (u64)relocs_chunk->kdata[idx + 3] << 32; (*cs_reloc)->lobj.gpu_offset |= relocs_chunk->kdata[idx + 0]; return 0; @@ -717,7 +717,7 @@ static int r600_cs_parser_relocs_legacy(struct radeon_cs_parser *p) if (p->chunk_relocs_idx == -1) { return 0; } - p->relocs = kcalloc(1, sizeof(struct radeon_cs_reloc), GFP_KERNEL); + p->relocs = kzalloc(sizeof(struct radeon_cs_reloc), GFP_KERNEL); if (p->relocs == NULL) { return -ENOMEM; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index cd650fd3964..53b55608102 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -162,6 +162,7 @@ struct radeon_fence_driver { struct list_head created; struct list_head emited; struct list_head signaled; + bool initialized; }; struct radeon_fence { @@ -202,8 +203,9 @@ struct radeon_surface_reg { struct radeon_mman { struct ttm_bo_global_ref bo_global_ref; struct ttm_global_reference mem_global_ref; - bool mem_global_referenced; struct ttm_bo_device bdev; + bool mem_global_referenced; + bool initialized; }; struct radeon_bo { diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 636116bedcb..eb29217bbf1 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -33,6 +33,7 @@ */ uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev); void radeon_legacy_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock); +uint32_t radeon_legacy_get_memory_clock(struct radeon_device *rdev); void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable); uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev); @@ -106,7 +107,7 @@ static struct radeon_asic r100_asic = { .copy = &r100_copy_blit, .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, - .get_memory_clock = NULL, + .get_memory_clock = &radeon_legacy_get_memory_clock, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -166,7 +167,7 @@ static struct radeon_asic r300_asic = { .copy = &r100_copy_blit, .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, - .get_memory_clock = NULL, + .get_memory_clock = &radeon_legacy_get_memory_clock, .set_memory_clock = NULL, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -259,7 +260,7 @@ static struct radeon_asic rs400_asic = { .copy = &r100_copy_blit, .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, - .get_memory_clock = NULL, + .get_memory_clock = &radeon_legacy_get_memory_clock, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 12a0c760e7f..321044bef71 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -745,8 +745,7 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct else radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, - (1 << - i), + (1 << i), dac), (1 << i)); } @@ -758,32 +757,30 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct if (bios_connectors[j].valid && (i != j)) { if (bios_connectors[i].line_mux == bios_connectors[j].line_mux) { - if (((bios_connectors[i]. - devices & - (ATOM_DEVICE_DFP_SUPPORT)) - && (bios_connectors[j]. - devices & - (ATOM_DEVICE_CRT_SUPPORT))) - || - ((bios_connectors[j]. - devices & - (ATOM_DEVICE_DFP_SUPPORT)) - && (bios_connectors[i]. - devices & - (ATOM_DEVICE_CRT_SUPPORT)))) { - bios_connectors[i]. - devices |= - bios_connectors[j]. - devices; - bios_connectors[i]. - connector_type = - DRM_MODE_CONNECTOR_DVII; - if (bios_connectors[j].devices & - (ATOM_DEVICE_DFP_SUPPORT)) + /* make sure not to combine LVDS */ + if (bios_connectors[i].devices & (ATOM_DEVICE_LCD_SUPPORT)) { + bios_connectors[i].line_mux = 53; + bios_connectors[i].ddc_bus.valid = false; + continue; + } + if (bios_connectors[j].devices & (ATOM_DEVICE_LCD_SUPPORT)) { + bios_connectors[j].line_mux = 53; + bios_connectors[j].ddc_bus.valid = false; + continue; + } + /* combine analog and digital for DVI-I */ + if (((bios_connectors[i].devices & (ATOM_DEVICE_DFP_SUPPORT)) && + (bios_connectors[j].devices & (ATOM_DEVICE_CRT_SUPPORT))) || + ((bios_connectors[j].devices & (ATOM_DEVICE_DFP_SUPPORT)) && + (bios_connectors[i].devices & (ATOM_DEVICE_CRT_SUPPORT)))) { + bios_connectors[i].devices |= + bios_connectors[j].devices; + bios_connectors[i].connector_type = + DRM_MODE_CONNECTOR_DVII; + if (bios_connectors[j].devices & (ATOM_DEVICE_DFP_SUPPORT)) bios_connectors[i].hpd = bios_connectors[j].hpd; - bios_connectors[j]. - valid = false; + bios_connectors[j].valid = false; } } } @@ -1234,6 +1231,61 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, return true; } +enum radeon_tv_std +radeon_atombios_get_tv_info(struct radeon_device *rdev) +{ + struct radeon_mode_info *mode_info = &rdev->mode_info; + int index = GetIndexIntoMasterTable(DATA, AnalogTV_Info); + uint16_t data_offset; + uint8_t frev, crev; + struct _ATOM_ANALOG_TV_INFO *tv_info; + enum radeon_tv_std tv_std = TV_STD_NTSC; + + atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, &crev, &data_offset); + + tv_info = (struct _ATOM_ANALOG_TV_INFO *)(mode_info->atom_context->bios + data_offset); + + switch (tv_info->ucTV_BootUpDefaultStandard) { + case ATOM_TV_NTSC: + tv_std = TV_STD_NTSC; + DRM_INFO("Default TV standard: NTSC\n"); + break; + case ATOM_TV_NTSCJ: + tv_std = TV_STD_NTSC_J; + DRM_INFO("Default TV standard: NTSC-J\n"); + break; + case ATOM_TV_PAL: + tv_std = TV_STD_PAL; + DRM_INFO("Default TV standard: PAL\n"); + break; + case ATOM_TV_PALM: + tv_std = TV_STD_PAL_M; + DRM_INFO("Default TV standard: PAL-M\n"); + break; + case ATOM_TV_PALN: + tv_std = TV_STD_PAL_N; + DRM_INFO("Default TV standard: PAL-N\n"); + break; + case ATOM_TV_PALCN: + tv_std = TV_STD_PAL_CN; + DRM_INFO("Default TV standard: PAL-CN\n"); + break; + case ATOM_TV_PAL60: + tv_std = TV_STD_PAL_60; + DRM_INFO("Default TV standard: PAL-60\n"); + break; + case ATOM_TV_SECAM: + tv_std = TV_STD_SECAM; + DRM_INFO("Default TV standard: SECAM\n"); + break; + default: + tv_std = TV_STD_NTSC; + DRM_INFO("Unknown TV standard; defaulting to NTSC\n"); + break; + } + return tv_std; +} + struct radeon_encoder_tv_dac * radeon_atombios_get_tv_dac_info(struct radeon_encoder *encoder) { @@ -1269,6 +1321,7 @@ radeon_atombios_get_tv_dac_info(struct radeon_encoder *encoder) dac = dac_info->ucDAC2_NTSC_DAC_Adjustment; tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20); + tv_dac->tv_std = radeon_atombios_get_tv_info(rdev); } return tv_dac; } diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c index b062109efbe..812f24dbc2a 100644 --- a/drivers/gpu/drm/radeon/radeon_clocks.c +++ b/drivers/gpu/drm/radeon/radeon_clocks.c @@ -62,7 +62,7 @@ uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev) } /* 10 khz */ -static uint32_t radeon_legacy_get_memory_clock(struct radeon_device *rdev) +uint32_t radeon_legacy_get_memory_clock(struct radeon_device *rdev) { struct radeon_pll *mpll = &rdev->clock.mpll; uint32_t fb_div, ref_div, post_div, mclk; diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index c5021a3445d..fd94dbca33a 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -634,11 +634,10 @@ struct radeon_encoder_primary_dac *radeon_combios_get_primary_dac_info(struct return p_dac; } -static enum radeon_tv_std -radeon_combios_get_tv_info(struct radeon_encoder *encoder) +enum radeon_tv_std +radeon_combios_get_tv_info(struct radeon_device *rdev) { - struct drm_device *dev = encoder->base.dev; - struct radeon_device *rdev = dev->dev_private; + struct drm_device *dev = rdev->ddev; uint16_t tv_info; enum radeon_tv_std tv_std = TV_STD_NTSC; @@ -779,7 +778,7 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20); found = 1; } - tv_dac->tv_std = radeon_combios_get_tv_info(encoder); + tv_dac->tv_std = radeon_combios_get_tv_info(rdev); } if (!found) { /* then check CRT table */ diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 5eece186e03..20161567dbf 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -208,6 +208,18 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode drm_mode_set_name(mode); DRM_DEBUG("Adding native panel mode %s\n", mode->name); + } else if (native_mode->hdisplay != 0 && + native_mode->vdisplay != 0) { + /* mac laptops without an edid */ + /* Note that this is not necessarily the exact panel mode, + * but an approximation based on the cvt formula. For these + * systems we should ideally read the mode info out of the + * registers or add a mode table, but this works and is much + * simpler. + */ + mode = drm_cvt_mode(dev, native_mode->hdisplay, native_mode->vdisplay, 60, true, false, false); + mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; + DRM_DEBUG("Adding cvt approximation of native panel mode %s\n", mode->name); } return mode; } @@ -1171,7 +1183,7 @@ radeon_add_atom_connector(struct drm_device *dev, 1); drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.tv_std_property, - 1); + radeon_atombios_get_tv_info(rdev)); } break; case DRM_MODE_CONNECTOR_LVDS: @@ -1315,7 +1327,7 @@ radeon_add_legacy_connector(struct drm_device *dev, 1); drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.tv_std_property, - 1); + radeon_combios_get_tv_info(rdev)); } break; case DRM_MODE_CONNECTOR_LVDS: diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 02bcdb1240c..7c6848096bc 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -391,6 +391,12 @@ int radeon_asic_init(struct radeon_device *rdev) /* FIXME: not supported yet */ return -EINVAL; } + + if (rdev->flags & RADEON_IS_IGP) { + rdev->asic->get_memory_clock = NULL; + rdev->asic->set_memory_clock = NULL; + } + return 0; } @@ -481,6 +487,7 @@ int radeon_atombios_init(struct radeon_device *rdev) atom_card_info->pll_write = cail_pll_write; rdev->mode_info.atom_context = atom_parse(atom_card_info, rdev->bios); + mutex_init(&rdev->mode_info.atom_context->mutex); radeon_atom_initialize_bios_scratch_regs(rdev->ddev); atom_allocate_fb_scratch(rdev->mode_info.atom_context); return 0; @@ -539,9 +546,72 @@ void radeon_agp_disable(struct radeon_device *rdev) } } -/* - * Radeon device. - */ +void radeon_check_arguments(struct radeon_device *rdev) +{ + /* vramlimit must be a power of two */ + switch (radeon_vram_limit) { + case 0: + case 4: + case 8: + case 16: + case 32: + case 64: + case 128: + case 256: + case 512: + case 1024: + case 2048: + case 4096: + break; + default: + dev_warn(rdev->dev, "vram limit (%d) must be a power of 2\n", + radeon_vram_limit); + radeon_vram_limit = 0; + break; + } + radeon_vram_limit = radeon_vram_limit << 20; + /* gtt size must be power of two and greater or equal to 32M */ + switch (radeon_gart_size) { + case 4: + case 8: + case 16: + dev_warn(rdev->dev, "gart size (%d) too small forcing to 512M\n", + radeon_gart_size); + radeon_gart_size = 512; + break; + case 32: + case 64: + case 128: + case 256: + case 512: + case 1024: + case 2048: + case 4096: + break; + default: + dev_warn(rdev->dev, "gart size (%d) must be a power of 2\n", + radeon_gart_size); + radeon_gart_size = 512; + break; + } + rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; + /* AGP mode can only be -1, 1, 2, 4, 8 */ + switch (radeon_agpmode) { + case -1: + case 0: + case 1: + case 2: + case 4: + case 8: + break; + default: + dev_warn(rdev->dev, "invalid AGP mode %d (valid mode: " + "-1, 0, 1, 2, 4, 8)\n", radeon_agpmode); + radeon_agpmode = 0; + break; + } +} + int radeon_device_init(struct radeon_device *rdev, struct drm_device *ddev, struct pci_dev *pdev, @@ -580,9 +650,9 @@ int radeon_device_init(struct radeon_device *rdev, /* Set asic functions */ r = radeon_asic_init(rdev); - if (r) { + if (r) return r; - } + radeon_check_arguments(rdev); if (rdev->flags & RADEON_IS_AGP && radeon_agpmode == -1) { radeon_agp_disable(rdev); diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index a133b833e45..91d72b70abc 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -739,7 +739,7 @@ static struct drm_prop_enum_list radeon_tv_std_enum_list[] = { TV_STD_SECAM, "secam" }, }; -int radeon_modeset_create_props(struct radeon_device *rdev) +static int radeon_modeset_create_props(struct radeon_device *rdev) { int i, sz; diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index dbd56ef82f9..8ba3de7994d 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -196,7 +196,7 @@ static struct drm_driver driver_old = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, @@ -284,7 +284,7 @@ static struct drm_driver kms_driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = radeon_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 0d1d908e522..ccba95f83d1 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -233,6 +233,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, if (!ASIC_IS_AVIVO(rdev)) { adjusted_mode->hdisplay = mode->hdisplay; adjusted_mode->vdisplay = mode->vdisplay; + adjusted_mode->crtc_hdisplay = mode->hdisplay; + adjusted_mode->crtc_vdisplay = mode->vdisplay; } adjusted_mode->base.id = mode_id; } @@ -495,9 +497,9 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE; args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { - if (dig->lvds_misc & (1 << 0)) + if (dig->lvds_misc & ATOM_PANEL_MISC_DUAL) args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL; - if (dig->lvds_misc & (1 << 1)) + if (dig->lvds_misc & ATOM_PANEL_MISC_888RGB) args.v1.ucMisc |= (1 << 1); } else { if (dig_connector->linkb) @@ -524,18 +526,18 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) args.v2.ucTemporal = 0; args.v2.ucFRC = 0; if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { - if (dig->lvds_misc & (1 << 0)) + if (dig->lvds_misc & ATOM_PANEL_MISC_DUAL) args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL; - if (dig->lvds_misc & (1 << 5)) { + if (dig->lvds_misc & ATOM_PANEL_MISC_SPATIAL) { args.v2.ucSpatial = PANEL_ENCODER_SPATIAL_DITHER_EN; - if (dig->lvds_misc & (1 << 1)) + if (dig->lvds_misc & ATOM_PANEL_MISC_888RGB) args.v2.ucSpatial |= PANEL_ENCODER_SPATIAL_DITHER_DEPTH; } - if (dig->lvds_misc & (1 << 6)) { + if (dig->lvds_misc & ATOM_PANEL_MISC_TEMPORAL) { args.v2.ucTemporal = PANEL_ENCODER_TEMPORAL_DITHER_EN; - if (dig->lvds_misc & (1 << 1)) + if (dig->lvds_misc & ATOM_PANEL_MISC_888RGB) args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_DITHER_DEPTH; - if (((dig->lvds_misc >> 2) & 0x3) == 2) + if (((dig->lvds_misc >> ATOM_PANEL_MISC_GREY_LEVEL_SHIFT) & 0x3) == 2) args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_LEVEL_4; } } else { diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index cb4cd97ae39..4cdd8b4f754 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -324,7 +324,7 @@ int radeon_fence_driver_init(struct radeon_device *rdev) write_lock_irqsave(&rdev->fence_drv.lock, irq_flags); r = radeon_scratch_get(rdev, &rdev->fence_drv.scratch_reg); if (r) { - DRM_ERROR("Fence failed to get a scratch register."); + dev_err(rdev->dev, "fence failed to get scratch register\n"); write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags); return r; } @@ -335,9 +335,10 @@ int radeon_fence_driver_init(struct radeon_device *rdev) INIT_LIST_HEAD(&rdev->fence_drv.signaled); rdev->fence_drv.count_timeout = 0; init_waitqueue_head(&rdev->fence_drv.queue); + rdev->fence_drv.initialized = true; write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags); if (radeon_debugfs_fence_init(rdev)) { - DRM_ERROR("Failed to register debugfs file for fence !\n"); + dev_err(rdev->dev, "fence debugfs file creation failed\n"); } return 0; } @@ -346,11 +347,13 @@ void radeon_fence_driver_fini(struct radeon_device *rdev) { unsigned long irq_flags; + if (!rdev->fence_drv.initialized) + return; wake_up_all(&rdev->fence_drv.queue); write_lock_irqsave(&rdev->fence_drv.lock, irq_flags); radeon_scratch_free(rdev, rdev->fence_drv.scratch_reg); write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags); - DRM_INFO("radeon: fence finalized\n"); + rdev->fence_drv.initialized = false; } diff --git a/drivers/gpu/drm/radeon/radeon_ioc32.c b/drivers/gpu/drm/radeon/radeon_ioc32.c index a1bf11de308..48b7cea31e0 100644 --- a/drivers/gpu/drm/radeon/radeon_ioc32.c +++ b/drivers/gpu/drm/radeon/radeon_ioc32.c @@ -92,8 +92,7 @@ static int compat_radeon_cp_init(struct file *file, unsigned int cmd, &init->gart_textures_offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_CP_INIT, (unsigned long)init); + return drm_ioctl(file, DRM_IOCTL_RADEON_CP_INIT, (unsigned long)init); } typedef struct drm_radeon_clear32 { @@ -125,8 +124,7 @@ static int compat_radeon_cp_clear(struct file *file, unsigned int cmd, &clr->depth_boxes)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_CLEAR, (unsigned long)clr); + return drm_ioctl(file, DRM_IOCTL_RADEON_CLEAR, (unsigned long)clr); } typedef struct drm_radeon_stipple32 { @@ -149,8 +147,7 @@ static int compat_radeon_cp_stipple(struct file *file, unsigned int cmd, &request->mask)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_STIPPLE, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_STIPPLE, (unsigned long)request); } typedef struct drm_radeon_tex_image32 { @@ -204,8 +201,7 @@ static int compat_radeon_cp_texture(struct file *file, unsigned int cmd, &image->data)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_TEXTURE, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_TEXTURE, (unsigned long)request); } typedef struct drm_radeon_vertex2_32 { @@ -238,8 +234,7 @@ static int compat_radeon_cp_vertex2(struct file *file, unsigned int cmd, &request->prim)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_VERTEX2, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_VERTEX2, (unsigned long)request); } typedef struct drm_radeon_cmd_buffer32 { @@ -268,8 +263,7 @@ static int compat_radeon_cp_cmdbuf(struct file *file, unsigned int cmd, &request->boxes)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_CMDBUF, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_CMDBUF, (unsigned long)request); } typedef struct drm_radeon_getparam32 { @@ -293,8 +287,7 @@ static int compat_radeon_cp_getparam(struct file *file, unsigned int cmd, &request->value)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_GETPARAM, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_GETPARAM, (unsigned long)request); } typedef struct drm_radeon_mem_alloc32 { @@ -322,8 +315,7 @@ static int compat_radeon_mem_alloc(struct file *file, unsigned int cmd, &request->region_offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_ALLOC, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_ALLOC, (unsigned long)request); } typedef struct drm_radeon_irq_emit32 { @@ -345,8 +337,7 @@ static int compat_radeon_irq_emit(struct file *file, unsigned int cmd, &request->irq_seq)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_IRQ_EMIT, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_IRQ_EMIT, (unsigned long)request); } /* The two 64-bit arches where alignof(u64)==4 in 32-bit code */ @@ -372,8 +363,7 @@ static int compat_radeon_cp_setparam(struct file *file, unsigned int cmd, &request->value)) return -EFAULT; - return drm_ioctl(file->f_dentry->d_inode, file, - DRM_IOCTL_RADEON_SETPARAM, (unsigned long) request); + return drm_ioctl(file, DRM_IOCTL_RADEON_SETPARAM, (unsigned long) request); } #else #define compat_radeon_cp_setparam NULL @@ -413,12 +403,10 @@ long radeon_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(radeon_compat_ioctls)) fn = radeon_compat_ioctls[nr - DRM_COMMAND_BASE]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } @@ -431,9 +419,7 @@ long radeon_kms_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long if (nr < DRM_COMMAND_BASE) return drm_compat_ioctl(filp, cmd, arg); - lock_kernel(); /* XXX for now */ - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index b82ede98e15..cc27485a07a 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -43,8 +43,7 @@ static void radeon_overscan_setup(struct drm_crtc *crtc, } static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) + struct drm_display_mode *mode) { struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; @@ -1059,7 +1058,7 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc, radeon_set_pll(crtc, adjusted_mode); radeon_overscan_setup(crtc, adjusted_mode); if (radeon_crtc->crtc_id == 0) { - radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode); + radeon_legacy_rmx_mode_set(crtc, adjusted_mode); } else { if (radeon_crtc->rmx_type != RMX_OFF) { /* FIXME: only first crtc has rmx what should we diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index df00515e81f..981508ff703 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -207,6 +207,8 @@ static bool radeon_legacy_mode_fixup(struct drm_encoder *encoder, *adjusted_mode = *native_mode; adjusted_mode->hdisplay = mode->hdisplay; adjusted_mode->vdisplay = mode->vdisplay; + adjusted_mode->crtc_hdisplay = mode->hdisplay; + adjusted_mode->crtc_vdisplay = mode->vdisplay; adjusted_mode->base.id = mode_id; } diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 3dcbe130c42..402369db5ba 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -88,6 +88,7 @@ enum radeon_tv_std { TV_STD_SCART_PAL, TV_STD_SECAM, TV_STD_PAL_CN, + TV_STD_PAL_N, }; /* radeon gpio-based i2c @@ -395,6 +396,11 @@ struct radeon_framebuffer { struct drm_gem_object *obj; }; +extern enum radeon_tv_std +radeon_combios_get_tv_info(struct radeon_device *rdev); +extern enum radeon_tv_std +radeon_atombios_get_tv_info(struct radeon_device *rdev); + extern void radeon_connector_hotplug(struct drm_connector *connector); extern bool radeon_dp_needs_link_train(struct radeon_connector *radeon_connector); extern int radeon_dp_mode_valid_helper(struct radeon_connector *radeon_connector, diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index 391c973ec4d..9f5e2f929da 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -42,8 +42,8 @@ void radeon_test_moves(struct radeon_device *rdev) /* Number of tests = * (Total GTT - IB pool - writeback page - ring buffer) / test size */ - n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE - - rdev->cp.ring_size) / size; + n = ((u32)(rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE - + rdev->cp.ring_size)) / size; gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL); if (!gtt_obj) { diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index d7fd160cc67..3b0c07b444a 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -494,6 +494,7 @@ int radeon_ttm_init(struct radeon_device *rdev) DRM_ERROR("failed initializing buffer object driver(%d).\n", r); return r; } + rdev->mman.initialized = true; r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_VRAM, rdev->mc.real_vram_size >> PAGE_SHIFT); if (r) { @@ -541,6 +542,8 @@ void radeon_ttm_fini(struct radeon_device *rdev) { int r; + if (!rdev->mman.initialized) + return; if (rdev->stollen_vga_memory) { r = radeon_bo_reserve(rdev->stollen_vga_memory, false); if (r == 0) { @@ -554,6 +557,7 @@ void radeon_ttm_fini(struct radeon_device *rdev) ttm_bo_device_release(&rdev->mman.bdev); radeon_gart_fini(rdev); radeon_ttm_global_fini(rdev); + rdev->mman.initialized = false; DRM_INFO("radeon: ttm finalized\n"); } diff --git a/drivers/gpu/drm/savage/savage_drv.c b/drivers/gpu/drm/savage/savage_drv.c index eee52aa92a7..021de44c15a 100644 --- a/drivers/gpu/drm/savage/savage_drv.c +++ b/drivers/gpu/drm/savage/savage_drv.c @@ -50,7 +50,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/sis/sis_drv.c b/drivers/gpu/drm/sis/sis_drv.c index e725cc0b115..4fd1f067d38 100644 --- a/drivers/gpu/drm/sis/sis_drv.c +++ b/drivers/gpu/drm/sis/sis_drv.c @@ -80,7 +80,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/tdfx/tdfx_drv.c b/drivers/gpu/drm/tdfx/tdfx_drv.c index 012ff2e356b..ec5a43e6572 100644 --- a/drivers/gpu/drm/tdfx/tdfx_drv.c +++ b/drivers/gpu/drm/tdfx/tdfx_drv.c @@ -48,7 +48,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/via/via_drv.c b/drivers/gpu/drm/via/via_drv.c index bc2f5184300..7a1b210401e 100644 --- a/drivers/gpu/drm/via/via_drv.c +++ b/drivers/gpu/drm/via/via_drv.c @@ -58,7 +58,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 7b48bb3b63b..1db1ef30be2 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -103,37 +103,39 @@ */ static struct drm_ioctl_desc vmw_ioctls[] = { - VMW_IOCTL_DEF(DRM_IOCTL_VMW_GET_PARAM, vmw_getparam_ioctl, 0), + VMW_IOCTL_DEF(DRM_IOCTL_VMW_GET_PARAM, vmw_getparam_ioctl, + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_ALLOC_DMABUF, vmw_dmabuf_alloc_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_UNREF_DMABUF, vmw_dmabuf_unref_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CURSOR_BYPASS, - vmw_kms_cursor_bypass_ioctl, 0), + vmw_kms_cursor_bypass_ioctl, + DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CONTROL_STREAM, vmw_overlay_ioctl, - 0), + DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CLAIM_STREAM, vmw_stream_claim_ioctl, - 0), + DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_UNREF_STREAM, vmw_stream_unref_ioctl, - 0), + DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CREATE_CONTEXT, vmw_context_define_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_UNREF_CONTEXT, vmw_context_destroy_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CREATE_SURFACE, vmw_surface_define_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_UNREF_SURFACE, vmw_surface_destroy_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_REF_SURFACE, vmw_surface_reference_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_EXECBUF, vmw_execbuf_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_FIFO_DEBUG, vmw_fifo_debug_ioctl, - 0), + DRM_AUTH | DRM_ROOT_ONLY | DRM_MASTER | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_FENCE_WAIT, vmw_fence_wait_ioctl, - 0) + DRM_AUTH | DRM_UNLOCKED) }; static struct pci_device_id vmw_pci_id_list[] = { @@ -460,11 +462,9 @@ static long vmw_unlocked_ioctl(struct file *filp, unsigned int cmd, struct drm_file *file_priv = filp->private_data; struct drm_device *dev = file_priv->minor->dev; unsigned int nr = DRM_IOCTL_NR(cmd); - long ret; /* - * The driver private ioctls and TTM ioctls should be - * thread-safe. + * Do extra checking on driver private ioctls. */ if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) @@ -477,18 +477,9 @@ static long vmw_unlocked_ioctl(struct file *filp, unsigned int cmd, nr - DRM_COMMAND_BASE); return -EINVAL; } - return drm_ioctl(filp->f_path.dentry->d_inode, - filp, cmd, arg); } - /* - * Not all old drm ioctls are thread-safe. - */ - - lock_kernel(); - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); - return ret; + return drm_ioctl(filp, cmd, arg); } static int vmw_firstopen(struct drm_device *dev) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 43546d09d1b..e61bd85b697 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -123,6 +123,7 @@ struct vmw_sw_context{ uint32_t last_cid; bool cid_valid; uint32_t last_sid; + uint32_t sid_translation; bool sid_valid; struct ttm_object_file *tfile; struct list_head validate_nodes; @@ -317,9 +318,10 @@ extern void vmw_surface_res_free(struct vmw_resource *res); extern int vmw_surface_init(struct vmw_private *dev_priv, struct vmw_surface *srf, void (*res_free) (struct vmw_resource *res)); -extern int vmw_user_surface_lookup(struct vmw_private *dev_priv, - struct ttm_object_file *tfile, - int sid, struct vmw_surface **out); +extern int vmw_user_surface_lookup_handle(struct vmw_private *dev_priv, + struct ttm_object_file *tfile, + uint32_t handle, + struct vmw_surface **out); extern int vmw_surface_destroy_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int vmw_surface_define_ioctl(struct drm_device *dev, void *data, @@ -328,7 +330,7 @@ extern int vmw_surface_reference_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int vmw_surface_check(struct vmw_private *dev_priv, struct ttm_object_file *tfile, - int id); + uint32_t handle, int *id); extern void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo); extern int vmw_dmabuf_init(struct vmw_private *dev_priv, struct vmw_dma_buffer *vmw_bo, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 7a39f3e6dc2..2e92da56740 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -73,21 +73,32 @@ static int vmw_cmd_cid_check(struct vmw_private *dev_priv, static int vmw_cmd_sid_check(struct vmw_private *dev_priv, struct vmw_sw_context *sw_context, - uint32_t sid) + uint32_t *sid) { - if (unlikely((!sw_context->sid_valid || sid != sw_context->last_sid) && - sid != SVGA3D_INVALID_ID)) { - int ret = vmw_surface_check(dev_priv, sw_context->tfile, sid); + if (*sid == SVGA3D_INVALID_ID) + return 0; + + if (unlikely((!sw_context->sid_valid || + *sid != sw_context->last_sid))) { + int real_id; + int ret = vmw_surface_check(dev_priv, sw_context->tfile, + *sid, &real_id); if (unlikely(ret != 0)) { - DRM_ERROR("Could ot find or use surface %u\n", - (unsigned) sid); + DRM_ERROR("Could ot find or use surface 0x%08x " + "address 0x%08lx\n", + (unsigned int) *sid, + (unsigned long) sid); return ret; } - sw_context->last_sid = sid; + sw_context->last_sid = *sid; sw_context->sid_valid = true; - } + *sid = real_id; + sw_context->sid_translation = real_id; + } else + *sid = sw_context->sid_translation; + return 0; } @@ -107,7 +118,8 @@ static int vmw_cmd_set_render_target_check(struct vmw_private *dev_priv, return ret; cmd = container_of(header, struct vmw_sid_cmd, header); - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.target.sid); + ret = vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.target.sid); + return ret; } static int vmw_cmd_surface_copy_check(struct vmw_private *dev_priv, @@ -121,10 +133,10 @@ static int vmw_cmd_surface_copy_check(struct vmw_private *dev_priv, int ret; cmd = container_of(header, struct vmw_sid_cmd, header); - ret = vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.src.sid); + ret = vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.src.sid); if (unlikely(ret != 0)) return ret; - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.dest.sid); + return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.dest.sid); } static int vmw_cmd_stretch_blt_check(struct vmw_private *dev_priv, @@ -138,10 +150,10 @@ static int vmw_cmd_stretch_blt_check(struct vmw_private *dev_priv, int ret; cmd = container_of(header, struct vmw_sid_cmd, header); - ret = vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.src.sid); + ret = vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.src.sid); if (unlikely(ret != 0)) return ret; - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.dest.sid); + return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.dest.sid); } static int vmw_cmd_blt_surf_screen_check(struct vmw_private *dev_priv, @@ -154,7 +166,7 @@ static int vmw_cmd_blt_surf_screen_check(struct vmw_private *dev_priv, } *cmd; cmd = container_of(header, struct vmw_sid_cmd, header); - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.srcImage.sid); + return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.srcImage.sid); } static int vmw_cmd_present_check(struct vmw_private *dev_priv, @@ -167,7 +179,7 @@ static int vmw_cmd_present_check(struct vmw_private *dev_priv, } *cmd; cmd = container_of(header, struct vmw_sid_cmd, header); - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.sid); + return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.sid); } static int vmw_cmd_dma(struct vmw_private *dev_priv, @@ -187,12 +199,7 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, uint32_t cur_validate_node; struct ttm_validate_buffer *val_buf; - cmd = container_of(header, struct vmw_dma_cmd, header); - ret = vmw_cmd_sid_check(dev_priv, sw_context, cmd->dma.host.sid); - if (unlikely(ret != 0)) - return ret; - handle = cmd->dma.guest.ptr.gmrId; ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo); if (unlikely(ret != 0)) { @@ -228,14 +235,23 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, ++sw_context->cur_val_buf; } - ret = vmw_user_surface_lookup(dev_priv, sw_context->tfile, - cmd->dma.host.sid, &srf); + ret = vmw_user_surface_lookup_handle(dev_priv, sw_context->tfile, + cmd->dma.host.sid, &srf); if (ret) { DRM_ERROR("could not find surface\n"); goto out_no_reloc; } + /** + * Patch command stream with device SID. + */ + + cmd->dma.host.sid = srf->res.id; vmw_kms_cursor_snoop(srf, sw_context->tfile, bo, header); + /** + * FIXME: May deadlock here when called from the + * command parsing code. + */ vmw_surface_unreference(&srf); out_no_reloc: @@ -243,6 +259,90 @@ out_no_reloc: return ret; } +static int vmw_cmd_draw(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct vmw_draw_cmd { + SVGA3dCmdHeader header; + SVGA3dCmdDrawPrimitives body; + } *cmd; + SVGA3dVertexDecl *decl = (SVGA3dVertexDecl *)( + (unsigned long)header + sizeof(*cmd)); + SVGA3dPrimitiveRange *range; + uint32_t i; + uint32_t maxnum; + int ret; + + ret = vmw_cmd_cid_check(dev_priv, sw_context, header); + if (unlikely(ret != 0)) + return ret; + + cmd = container_of(header, struct vmw_draw_cmd, header); + maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); + + if (unlikely(cmd->body.numVertexDecls > maxnum)) { + DRM_ERROR("Illegal number of vertex declarations.\n"); + return -EINVAL; + } + + for (i = 0; i < cmd->body.numVertexDecls; ++i, ++decl) { + ret = vmw_cmd_sid_check(dev_priv, sw_context, + &decl->array.surfaceId); + if (unlikely(ret != 0)) + return ret; + } + + maxnum = (header->size - sizeof(cmd->body) - + cmd->body.numVertexDecls * sizeof(*decl)) / sizeof(*range); + if (unlikely(cmd->body.numRanges > maxnum)) { + DRM_ERROR("Illegal number of index ranges.\n"); + return -EINVAL; + } + + range = (SVGA3dPrimitiveRange *) decl; + for (i = 0; i < cmd->body.numRanges; ++i, ++range) { + ret = vmw_cmd_sid_check(dev_priv, sw_context, + &range->indexArray.surfaceId); + if (unlikely(ret != 0)) + return ret; + } + return 0; +} + + +static int vmw_cmd_tex_state(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct vmw_tex_state_cmd { + SVGA3dCmdHeader header; + SVGA3dCmdSetTextureState state; + }; + + SVGA3dTextureState *last_state = (SVGA3dTextureState *) + ((unsigned long) header + header->size + sizeof(header)); + SVGA3dTextureState *cur_state = (SVGA3dTextureState *) + ((unsigned long) header + sizeof(struct vmw_tex_state_cmd)); + int ret; + + ret = vmw_cmd_cid_check(dev_priv, sw_context, header); + if (unlikely(ret != 0)) + return ret; + + for (; cur_state < last_state; ++cur_state) { + if (likely(cur_state->name != SVGA3D_TS_BIND_TEXTURE)) + continue; + + ret = vmw_cmd_sid_check(dev_priv, sw_context, + &cur_state->value); + if (unlikely(ret != 0)) + return ret; + } + + return 0; +} + typedef int (*vmw_cmd_func) (struct vmw_private *, struct vmw_sw_context *, @@ -264,7 +364,7 @@ static vmw_cmd_func vmw_cmd_funcs[SVGA_3D_CMD_MAX] = { VMW_CMD_DEF(SVGA_3D_CMD_SETRENDERSTATE, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SETRENDERTARGET, &vmw_cmd_set_render_target_check), - VMW_CMD_DEF(SVGA_3D_CMD_SETTEXTURESTATE, &vmw_cmd_cid_check), + VMW_CMD_DEF(SVGA_3D_CMD_SETTEXTURESTATE, &vmw_cmd_tex_state), VMW_CMD_DEF(SVGA_3D_CMD_SETMATERIAL, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SETLIGHTDATA, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SETLIGHTENABLED, &vmw_cmd_cid_check), @@ -276,7 +376,7 @@ static vmw_cmd_func vmw_cmd_funcs[SVGA_3D_CMD_MAX] = { VMW_CMD_DEF(SVGA_3D_CMD_SHADER_DESTROY, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SET_SHADER, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SET_SHADER_CONST, &vmw_cmd_cid_check), - VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_cid_check), + VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_draw), VMW_CMD_DEF(SVGA_3D_CMD_SETSCISSORRECT, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_BEGIN_QUERY, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_cid_check), @@ -291,6 +391,7 @@ static int vmw_cmd_check(struct vmw_private *dev_priv, void *buf, uint32_t *size) { uint32_t cmd_id; + uint32_t size_remaining = *size; SVGA3dCmdHeader *header = (SVGA3dCmdHeader *) buf; int ret; @@ -304,6 +405,9 @@ static int vmw_cmd_check(struct vmw_private *dev_priv, *size = le32_to_cpu(header->size) + sizeof(SVGA3dCmdHeader); cmd_id -= SVGA_3D_CMD_BASE; + if (unlikely(*size > size_remaining)) + goto out_err; + if (unlikely(cmd_id >= SVGA_3D_CMD_MAX - SVGA_3D_CMD_BASE)) goto out_err; @@ -326,6 +430,7 @@ static int vmw_cmd_check_all(struct vmw_private *dev_priv, int ret; while (cur_size > 0) { + size = cur_size; ret = vmw_cmd_check(dev_priv, sw_context, buf, &size); if (unlikely(ret != 0)) return ret; @@ -386,7 +491,7 @@ static int vmw_validate_single_buffer(struct vmw_private *dev_priv, return 0; ret = vmw_gmr_bind(dev_priv, bo); - if (likely(ret == 0 || ret == -ERESTART)) + if (likely(ret == 0 || ret == -ERESTARTSYS)) return ret; @@ -429,7 +534,7 @@ int vmw_execbuf_ioctl(struct drm_device *dev, void *data, ret = mutex_lock_interruptible(&dev_priv->cmdbuf_mutex); if (unlikely(ret != 0)) { - ret = -ERESTART; + ret = -ERESTARTSYS; goto out_no_cmd_mutex; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index 76b0693e245..01feb48af33 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -191,7 +191,7 @@ static int vmw_fifo_wait_noirq(struct vmw_private *dev_priv, } schedule_timeout(1); if (interruptible && signal_pending(current)) { - ret = -ERESTART; + ret = -ERESTARTSYS; break; } } @@ -237,9 +237,7 @@ static int vmw_fifo_wait(struct vmw_private *dev_priv, (dev_priv->fifo_queue, !vmw_fifo_is_full(dev_priv, bytes), timeout); - if (unlikely(ret == -ERESTARTSYS)) - ret = -ERESTART; - else if (unlikely(ret == 0)) + if (unlikely(ret == 0)) ret = -EBUSY; else if (likely(ret > 0)) ret = 0; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c index 9e0f0306eed..d40086fc864 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c @@ -155,7 +155,7 @@ int vmw_fallback_wait(struct vmw_private *dev_priv, TASK_UNINTERRUPTIBLE); } if (interruptible && signal_pending(current)) { - ret = -ERESTART; + ret = -ERESTARTSYS; break; } } @@ -218,9 +218,7 @@ int vmw_wait_fence(struct vmw_private *dev_priv, vmw_fence_signaled(dev_priv, sequence), timeout); - if (unlikely(ret == -ERESTARTSYS)) - ret = -ERESTART; - else if (unlikely(ret == 0)) + if (unlikely(ret == 0)) ret = -EBUSY; else if (likely(ret > 0)) ret = 0; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index e9403be446f..b1af76e371c 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -106,8 +106,8 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, int ret; if (handle) { - ret = vmw_user_surface_lookup(dev_priv, tfile, - handle, &surface); + ret = vmw_user_surface_lookup_handle(dev_priv, tfile, + handle, &surface); if (!ret) { if (!surface->snooper.image) { DRM_ERROR("surface not suitable for cursor\n"); @@ -704,8 +704,8 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, struct vmw_dma_buffer *bo = NULL; int ret; - ret = vmw_user_surface_lookup(dev_priv, tfile, - mode_cmd->handle, &surface); + ret = vmw_user_surface_lookup_handle(dev_priv, tfile, + mode_cmd->handle, &surface); if (ret) goto try_dmabuf; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index a1ceed0c8e0..c012d5927f6 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -488,28 +488,44 @@ static void vmw_user_surface_free(struct vmw_resource *res) kfree(user_srf); } -int vmw_user_surface_lookup(struct vmw_private *dev_priv, - struct ttm_object_file *tfile, - int sid, struct vmw_surface **out) +int vmw_user_surface_lookup_handle(struct vmw_private *dev_priv, + struct ttm_object_file *tfile, + uint32_t handle, struct vmw_surface **out) { struct vmw_resource *res; struct vmw_surface *srf; struct vmw_user_surface *user_srf; + struct ttm_base_object *base; + int ret = -EINVAL; - res = vmw_resource_lookup(dev_priv, &dev_priv->surface_idr, sid); - if (unlikely(res == NULL)) + base = ttm_base_object_lookup(tfile, handle); + if (unlikely(base == NULL)) return -EINVAL; - if (res->res_free != &vmw_user_surface_free) - return -EINVAL; + if (unlikely(base->object_type != VMW_RES_SURFACE)) + goto out_bad_resource; - srf = container_of(res, struct vmw_surface, res); - user_srf = container_of(srf, struct vmw_user_surface, srf); - if (user_srf->base.tfile != tfile && !user_srf->base.shareable) - return -EPERM; + user_srf = container_of(base, struct vmw_user_surface, base); + srf = &user_srf->srf; + res = &srf->res; + + read_lock(&dev_priv->resource_lock); + + if (!res->avail || res->res_free != &vmw_user_surface_free) { + read_unlock(&dev_priv->resource_lock); + goto out_bad_resource; + } + + kref_get(&res->kref); + read_unlock(&dev_priv->resource_lock); *out = srf; - return 0; + ret = 0; + +out_bad_resource: + ttm_base_object_unref(&base); + + return ret; } static void vmw_user_surface_base_release(struct ttm_base_object **p_base) @@ -526,35 +542,10 @@ static void vmw_user_surface_base_release(struct ttm_base_object **p_base) int vmw_surface_destroy_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - struct vmw_private *dev_priv = vmw_priv(dev); - struct vmw_resource *res; - struct vmw_surface *srf; - struct vmw_user_surface *user_srf; struct drm_vmw_surface_arg *arg = (struct drm_vmw_surface_arg *)data; struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; - int ret = 0; - - res = vmw_resource_lookup(dev_priv, &dev_priv->surface_idr, arg->sid); - if (unlikely(res == NULL)) - return -EINVAL; - - if (res->res_free != &vmw_user_surface_free) { - ret = -EINVAL; - goto out; - } - srf = container_of(res, struct vmw_surface, res); - user_srf = container_of(srf, struct vmw_user_surface, srf); - if (user_srf->base.tfile != tfile && !user_srf->base.shareable) { - ret = -EPERM; - goto out; - } - - ttm_ref_object_base_unref(tfile, user_srf->base.hash.key, - TTM_REF_USAGE); -out: - vmw_resource_unreference(&res); - return ret; + return ttm_ref_object_base_unref(tfile, arg->sid, TTM_REF_USAGE); } int vmw_surface_define_ioctl(struct drm_device *dev, void *data, @@ -649,7 +640,10 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, } srf->snooper.crtc = NULL; - rep->sid = res->id; + rep->sid = user_srf->base.hash.key; + if (rep->sid == SVGA3D_INVALID_ID) + DRM_ERROR("Created bad Surface ID.\n"); + vmw_resource_unreference(&res); return 0; out_err1: @@ -662,39 +656,33 @@ out_err0: int vmw_surface_reference_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - struct vmw_private *dev_priv = vmw_priv(dev); union drm_vmw_surface_reference_arg *arg = (union drm_vmw_surface_reference_arg *)data; struct drm_vmw_surface_arg *req = &arg->req; struct drm_vmw_surface_create_req *rep = &arg->rep; struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; - struct vmw_resource *res; struct vmw_surface *srf; struct vmw_user_surface *user_srf; struct drm_vmw_size __user *user_sizes; - int ret; + struct ttm_base_object *base; + int ret = -EINVAL; - res = vmw_resource_lookup(dev_priv, &dev_priv->surface_idr, req->sid); - if (unlikely(res == NULL)) + base = ttm_base_object_lookup(tfile, req->sid); + if (unlikely(base == NULL)) { + DRM_ERROR("Could not find surface to reference.\n"); return -EINVAL; - - if (res->res_free != &vmw_user_surface_free) { - ret = -EINVAL; - goto out; } - srf = container_of(res, struct vmw_surface, res); - user_srf = container_of(srf, struct vmw_user_surface, srf); - if (user_srf->base.tfile != tfile && !user_srf->base.shareable) { - DRM_ERROR("Tried to reference none shareable surface\n"); - ret = -EPERM; - goto out; - } + if (unlikely(base->object_type != VMW_RES_SURFACE)) + goto out_bad_resource; + + user_srf = container_of(base, struct vmw_user_surface, base); + srf = &user_srf->srf; ret = ttm_ref_object_add(tfile, &user_srf->base, TTM_REF_USAGE, NULL); if (unlikely(ret != 0)) { DRM_ERROR("Could not add a reference to a surface.\n"); - goto out; + goto out_no_reference; } rep->flags = srf->flags; @@ -706,40 +694,43 @@ int vmw_surface_reference_ioctl(struct drm_device *dev, void *data, if (user_sizes) ret = copy_to_user(user_sizes, srf->sizes, srf->num_sizes * sizeof(*srf->sizes)); - if (unlikely(ret != 0)) { + if (unlikely(ret != 0)) DRM_ERROR("copy_to_user failed %p %u\n", user_sizes, srf->num_sizes); - /** - * FIXME: Unreference surface here? - */ - goto out; - } -out: - vmw_resource_unreference(&res); +out_bad_resource: +out_no_reference: + ttm_base_object_unref(&base); + return ret; } int vmw_surface_check(struct vmw_private *dev_priv, struct ttm_object_file *tfile, - int id) + uint32_t handle, int *id) { - struct vmw_resource *res; - int ret = 0; + struct ttm_base_object *base; + struct vmw_user_surface *user_srf; - read_lock(&dev_priv->resource_lock); - res = idr_find(&dev_priv->surface_idr, id); - if (res && res->avail) { - struct vmw_surface *srf = - container_of(res, struct vmw_surface, res); - struct vmw_user_surface *usrf = - container_of(srf, struct vmw_user_surface, srf); + int ret = -EPERM; - if (usrf->base.tfile != tfile && !usrf->base.shareable) - ret = -EPERM; - } else - ret = -EINVAL; - read_unlock(&dev_priv->resource_lock); + base = ttm_base_object_lookup(tfile, handle); + if (unlikely(base == NULL)) + return -EINVAL; + + if (unlikely(base->object_type != VMW_RES_SURFACE)) + goto out_bad_surface; + user_srf = container_of(base, struct vmw_user_surface, base); + *id = user_srf->srf.res.id; + ret = 0; + +out_bad_surface: + /** + * FIXME: May deadlock here when called from the + * command parsing code. + */ + + ttm_base_object_unref(&base); return ret; } diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index b309ac2c3d5..fe3fb567317 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -693,13 +693,13 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) } /* Set TWI internal clock as 10MHz */ - write_CONTROL(iface, ((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F); + write_CONTROL(iface, ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F); /* * We will not end up with a CLKDIV=0 because no one will specify - * 20kHz SCL or less in Kconfig now. (5 * 1024 / 20 = 0x100) + * 20kHz SCL or less in Kconfig now. (5 * 1000 / 20 = 250) */ - clkhilow = 5 * 1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ; + clkhilow = ((10 * 1000 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + 1) / 2; /* Set Twi interface clock as specified */ write_CLKDIV(iface, (clkhilow << 8) | clkhilow); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 75bf3ad1809..0037e31076b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -247,7 +247,13 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev) omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); } dev->idle = 0; - omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); + + /* + * Don't write to this register if the IE state is 0 as it can + * cause deadlock. + */ + if (dev->iestate) + omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); } static void omap_i2c_idle(struct omap_i2c_dev *dev) @@ -280,6 +286,11 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) unsigned long internal_clk = 0; if (dev->rev >= OMAP_I2C_REV_2) { + /* Disable I2C controller before soft reset */ + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, + omap_i2c_read_reg(dev, OMAP_I2C_CON_REG) & + ~(OMAP_I2C_CON_EN)); + omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK); /* For some reason we need to set the EN bit before the * reset done bit gets set. */ diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig index f102fcc7e52..e02096cf7d9 100644 --- a/drivers/ieee1394/Kconfig +++ b/drivers/ieee1394/Kconfig @@ -1,8 +1,3 @@ -menu "IEEE 1394 (FireWire) support" - depends on PCI || BROKEN - -source "drivers/firewire/Kconfig" - config IEEE1394 tristate "Legacy alternative FireWire driver stack" depends on PCI || BROKEN @@ -16,8 +11,13 @@ config IEEE1394 is the core support only, you will also need to select a driver for your IEEE 1394 adapter. - To compile this driver as a module, say M here: the - module will be called ieee1394. + To compile this driver as a module, say M here: the module will be + called ieee1394. + + NOTE: + ieee1394 is superseded by the newer firewire-core driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. config IEEE1394_OHCI1394 tristate "OHCI-1394 controllers" @@ -29,19 +29,23 @@ config IEEE1394_OHCI1394 use one of these chipsets. It should work with any OHCI-1394 compliant card, however. - To compile this driver as a module, say M here: the - module will be called ohci1394. + To compile this driver as a module, say M here: the module will be + called ohci1394. NOTE: + ohci1394 is superseded by the newer firewire-ohci driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + If you want to install firewire-ohci and ohci1394 together, you should configure them only as modules and blacklist the driver(s) which you don't want to have auto-loaded. Add either - blacklist firewire-ohci - or blacklist ohci1394 blacklist video1394 blacklist dv1394 + or + blacklist firewire-ohci to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf depending on your distribution. @@ -58,8 +62,8 @@ config IEEE1394_PCILYNX Instruments PCILynx chip. Note: this driver is written for revision 2 of this chip and may not work with revision 0. - To compile this driver as a module, say M here: the - module will be called pcilynx. + To compile this driver as a module, say M here: the module will be + called pcilynx. Only some old and now very rare PCI and CardBus cards and PowerMacs G3 B&W contain the PCILynx controller. Therefore @@ -79,6 +83,14 @@ config IEEE1394_SBP2 You should also enable support for disks, CD-ROMs, etc. in the SCSI configuration section. + To compile this driver as a module, say M here: the module will be + called sbp2. + + NOTE: + sbp2 is superseded by the newer firewire-sbp2 driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_SBP2_PHYS_DMA bool "Enable replacement for physical DMA in SBP2" depends on IEEE1394_SBP2 && VIRT_TO_BUS && EXPERIMENTAL @@ -111,6 +123,11 @@ config IEEE1394_ETH1394 The module is called eth1394 although it does not emulate Ethernet. + NOTE: + eth1394 is superseded by the newer firewire-net driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_RAWIO tristate "raw1394 userspace interface" depends on IEEE1394 @@ -123,6 +140,11 @@ config IEEE1394_RAWIO To compile this driver as a module, say M here: the module will be called raw1394. + NOTE: + raw1394 is superseded by the newer firewire-core driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_VIDEO1394 tristate "video1394 userspace interface" depends on IEEE1394 && IEEE1394_OHCI1394 @@ -136,13 +158,18 @@ config IEEE1394_VIDEO1394 To compile this driver as a module, say M here: the module will be called video1394. + NOTE: + video1394 is superseded by the newer firewire-core driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_DV1394 tristate "dv1394 userspace interface (deprecated)" depends on IEEE1394 && IEEE1394_OHCI1394 help The dv1394 driver is unsupported and may be removed from Linux in a - future release. Its functionality is now provided by raw1394 together - with libraries such as libiec61883. + future release. Its functionality is now provided by either + raw1394 or firewire-core together with libraries such as libiec61883. config IEEE1394_VERBOSEDEBUG bool "Excessive debugging output" @@ -153,5 +180,3 @@ config IEEE1394_VERBOSEDEBUG will quickly result in large amounts of data sent to the system log. Say Y if you really need the debugging output. Everyone else says N. - -endmenu diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index b483b2995fa..f967008f332 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -221,11 +221,27 @@ static int get_compatible_type(struct ff_device *ff, int effect_type) } /* + * Only left/right direction should be used (under/over 0x8000) for + * forward/reverse motor direction (to keep calculation fast & simple). + */ +static u16 ml_calculate_direction(u16 direction, u16 force, + u16 new_direction, u16 new_force) +{ + if (!force) + return new_direction; + if (!new_force) + return direction; + return (((u32)(direction >> 1) * force + + (new_direction >> 1) * new_force) / + (force + new_force)) << 1; +} + +/* * Combine two effects and apply gain. */ static void ml_combine_effects(struct ff_effect *effect, struct ml_effect_state *state, - unsigned int gain) + int gain) { struct ff_effect *new = state->effect; unsigned int strong, weak, i; @@ -252,8 +268,21 @@ static void ml_combine_effects(struct ff_effect *effect, break; case FF_RUMBLE: - strong = new->u.rumble.strong_magnitude * gain / 0xffff; - weak = new->u.rumble.weak_magnitude * gain / 0xffff; + strong = (u32)new->u.rumble.strong_magnitude * gain / 0xffff; + weak = (u32)new->u.rumble.weak_magnitude * gain / 0xffff; + + if (effect->u.rumble.strong_magnitude + strong) + effect->direction = ml_calculate_direction( + effect->direction, + effect->u.rumble.strong_magnitude, + new->direction, strong); + else if (effect->u.rumble.weak_magnitude + weak) + effect->direction = ml_calculate_direction( + effect->direction, + effect->u.rumble.weak_magnitude, + new->direction, weak); + else + effect->direction = 0; effect->u.rumble.strong_magnitude = min(strong + effect->u.rumble.strong_magnitude, 0xffffU); @@ -268,6 +297,13 @@ static void ml_combine_effects(struct ff_effect *effect, /* here we also scale it 0x7fff => 0xffff */ i = i * gain / 0x7fff; + if (effect->u.rumble.strong_magnitude + i) + effect->direction = ml_calculate_direction( + effect->direction, + effect->u.rumble.strong_magnitude, + new->direction, i); + else + effect->direction = 0; effect->u.rumble.strong_magnitude = min(i + effect->u.rumble.strong_magnitude, 0xffffU); effect->u.rumble.weak_magnitude = @@ -411,8 +447,6 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) msecs_to_jiffies(state->effect->replay.length); state->adj_at = state->play_at; - ml_schedule_timer(ml); - } else { debug("initiated stop"); @@ -420,10 +454,10 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) __set_bit(FF_EFFECT_ABORTING, &state->flags); else __clear_bit(FF_EFFECT_STARTED, &state->flags); - - ml_play_effects(ml); } + ml_play_effects(ml); + return 0; } diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index f6c688cae33..b1edd778639 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -210,7 +210,7 @@ static int iforce_open(struct input_dev *dev) return 0; } -static void iforce_release(struct input_dev *dev) +static void iforce_close(struct input_dev *dev) { struct iforce *iforce = input_get_drvdata(dev); int i; @@ -228,30 +228,17 @@ static void iforce_release(struct input_dev *dev) /* Disable force feedback playback */ iforce_send_packet(iforce, FF_CMD_ENABLE, "\001"); + /* Wait for the command to complete */ + wait_event_interruptible(iforce->wait, + !test_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags)); } switch (iforce->bus) { #ifdef CONFIG_JOYSTICK_IFORCE_USB - case IFORCE_USB: - usb_kill_urb(iforce->irq); - - /* The device was unplugged before the file - * was released */ - if (iforce->usbdev == NULL) { - iforce_delete_device(iforce); - kfree(iforce); - } - break; -#endif - } -} - -void iforce_delete_device(struct iforce *iforce) -{ - switch (iforce->bus) { -#ifdef CONFIG_JOYSTICK_IFORCE_USB case IFORCE_USB: - iforce_usb_delete(iforce); + usb_kill_urb(iforce->irq); + usb_kill_urb(iforce->out); + usb_kill_urb(iforce->ctrl); break; #endif #ifdef CONFIG_JOYSTICK_IFORCE_232 @@ -303,7 +290,7 @@ int iforce_init_device(struct iforce *iforce) input_dev->name = "Unknown I-Force device"; input_dev->open = iforce_open; - input_dev->close = iforce_release; + input_dev->close = iforce_close; /* * On-device memory allocation. diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 9f289d8f52c..b41303d3ec5 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -109,6 +109,7 @@ static void iforce_usb_out(struct urb *urb) struct iforce *iforce = urb->context; if (urb->status) { + clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); dbg("urb->status %d, exiting", urb->status); return; } @@ -186,33 +187,19 @@ fail: return err; } -/* Called by iforce_delete() */ -void iforce_usb_delete(struct iforce* iforce) -{ - usb_kill_urb(iforce->irq); - usb_kill_urb(iforce->out); - usb_kill_urb(iforce->ctrl); - - usb_free_urb(iforce->irq); - usb_free_urb(iforce->out); - usb_free_urb(iforce->ctrl); -} - static void iforce_usb_disconnect(struct usb_interface *intf) { struct iforce *iforce = usb_get_intfdata(intf); - int open = 0; /* FIXME! iforce->dev.handle->open; */ usb_set_intfdata(intf, NULL); - if (iforce) { - iforce->usbdev = NULL; - input_unregister_device(iforce->dev); - if (!open) { - iforce_delete_device(iforce); - kfree(iforce); - } - } + input_unregister_device(iforce->dev); + + usb_free_urb(iforce->irq); + usb_free_urb(iforce->out); + usb_free_urb(iforce->ctrl); + + kfree(iforce); } static struct usb_device_id iforce_usb_ids [] = { diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h index f2d91f4028c..9f494b75848 100644 --- a/drivers/input/joystick/iforce/iforce.h +++ b/drivers/input/joystick/iforce/iforce.h @@ -150,11 +150,9 @@ void iforce_serial_xmit(struct iforce *iforce); /* iforce-usb.c */ void iforce_usb_xmit(struct iforce *iforce); -void iforce_usb_delete(struct iforce *iforce); /* iforce-main.c */ int iforce_init_device(struct iforce *iforce); -void iforce_delete_device(struct iforce *iforce); /* iforce-packets.c */ int iforce_control_playback(struct iforce*, u16 id, unsigned int); diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index a3573570c52..1f5e2ce327d 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -134,7 +134,8 @@ static const unsigned short atkbd_unxlate_table[128] = { #define ATKBD_CMD_GETID 0x02f2 #define ATKBD_CMD_SETREP 0x10f3 #define ATKBD_CMD_ENABLE 0x00f4 -#define ATKBD_CMD_RESET_DIS 0x00f5 +#define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */ +#define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */ #define ATKBD_CMD_SETALL_MBR 0x00fa #define ATKBD_CMD_RESET_BAT 0x02ff #define ATKBD_CMD_RESEND 0x00fe @@ -836,7 +837,7 @@ static void atkbd_cleanup(struct serio *serio) struct atkbd *atkbd = serio_get_drvdata(serio); atkbd_disable(atkbd); - ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT); + ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF); } diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index 34f4a29d497..d3c8b61a941 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -29,11 +29,13 @@ struct matrix_keypad { unsigned short *keycodes; unsigned int row_shift; + DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS); + uint32_t last_key_state[MATRIX_MAX_COLS]; struct delayed_work work; + spinlock_t lock; bool scan_pending; bool stopped; - spinlock_t lock; }; /* @@ -222,9 +224,16 @@ static int matrix_keypad_suspend(struct device *dev) matrix_keypad_stop(keypad->input_dev); - if (device_may_wakeup(&pdev->dev)) - for (i = 0; i < pdata->num_row_gpios; i++) - enable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + if (device_may_wakeup(&pdev->dev)) { + for (i = 0; i < pdata->num_row_gpios; i++) { + if (!test_bit(i, keypad->disabled_gpios)) { + unsigned int gpio = pdata->row_gpios[i]; + + if (enable_irq_wake(gpio_to_irq(gpio)) == 0) + __set_bit(i, keypad->disabled_gpios); + } + } + } return 0; } @@ -236,9 +245,15 @@ static int matrix_keypad_resume(struct device *dev) const struct matrix_keypad_platform_data *pdata = keypad->pdata; int i; - if (device_may_wakeup(&pdev->dev)) - for (i = 0; i < pdata->num_row_gpios; i++) - disable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + if (device_may_wakeup(&pdev->dev)) { + for (i = 0; i < pdata->num_row_gpios; i++) { + if (test_and_clear_bit(i, keypad->disabled_gpios)) { + unsigned int gpio = pdata->row_gpios[i]; + + disable_irq_wake(gpio_to_irq(gpio)); + } + } + } matrix_keypad_start(keypad->input_dev); diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index eeaa7acb9cf..21d6184efa9 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -253,14 +253,6 @@ static irqreturn_t do_kp_irq(int irq, void *_kp) u8 reg; int ret; -#ifdef CONFIG_LOCKDEP - /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which - * we don't want and can't tolerate. Although it might be - * friendlier not to borrow this thread context... - */ - local_irq_enable(); -#endif - /* Read & Clear TWL4030 pending interrupt */ ret = twl4030_kpread(kp, ®, KEYP_ISR1, 1); @@ -403,7 +395,8 @@ static int __devinit twl4030_kp_probe(struct platform_device *pdev) * * NOTE: we assume this host is wired to TWL4040 INT1, not INT2 ... */ - error = request_irq(kp->irq, do_kp_irq, 0, pdev->name, kp); + error = request_threaded_irq(kp->irq, NULL, do_kp_irq, + 0, pdev->name, kp); if (error) { dev_info(kp->dbg_dev, "request_irq failed for irq no=%d\n", kp->irq); diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c index bdde5c88903..e9069b87fde 100644 --- a/drivers/input/misc/twl4030-pwrbutton.c +++ b/drivers/input/misc/twl4030-pwrbutton.c @@ -39,18 +39,8 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr) int err; u8 value; -#ifdef CONFIG_LOCKDEP - /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which - * we don't want and can't tolerate since this is a threaded - * IRQ and can sleep due to the i2c reads it has to issue. - * Although it might be friendlier not to borrow this thread - * context... - */ - local_irq_enable(); -#endif - err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &value, - STS_HW_CONDITIONS); + STS_HW_CONDITIONS); if (!err) { input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ); input_sync(pwr); @@ -80,7 +70,7 @@ static int __devinit twl4030_pwrbutton_probe(struct platform_device *pdev) pwr->phys = "twl4030_pwrbutton/input0"; pwr->dev.parent = &pdev->dev; - err = request_irq(irq, powerbutton_irq, + err = request_threaded_irq(irq, NULL, powerbutton_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "twl4030_pwrbutton", pwr); if (err < 0) { diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 38da6ab0438..c0afb71a3a6 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -1328,7 +1328,7 @@ static struct platform_driver wistron_driver = { .driver = { .name = "wistron-bios", .owner = THIS_MODULE, -#if CONFIG_PM +#ifdef CONFIG_PM .pm = &wistron_pm_ops, #endif }, diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 3feeb3af8ab..c714ca2407f 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -70,7 +70,7 @@ config MOUSE_PS2_SYNAPTICS config MOUSE_PS2_LIFEBOOK bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED default y - depends on MOUSE_PS2 && X86 + depends on MOUSE_PS2 && X86 && DMI help Say Y here if you have a Fujitsu B-series Lifebook PS/2 TouchScreen connected to your system. diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index b146237266d..90be30e9355 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -427,7 +427,6 @@ static void hgpk_recalib_work(struct work_struct *work) static int hgpk_register(struct psmouse *psmouse) { - struct input_dev *dev = psmouse->dev; int err; /* register handlers */ diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 2e6bdfea016..6d7aa10d10f 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -44,7 +44,6 @@ static int lifebook_set_6byte_proto(const struct dmi_system_id *d) } static const struct dmi_system_id __initconst lifebook_dmi_table[] = { -#if defined(CONFIG_DMI) && defined(CONFIG_X86) { /* FLORA-ie 55mi */ .matches = { @@ -118,7 +117,6 @@ static const struct dmi_system_id __initconst lifebook_dmi_table[] = { }, }, { } -#endif }; void __init lifebook_module_init(void) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index fd0bc094616..401ac6b6edd 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -1137,7 +1137,10 @@ static void psmouse_cleanup(struct serio *serio) if (psmouse->cleanup) psmouse->cleanup(psmouse); - psmouse_reset(psmouse); +/* + * Reset the mouse to defaults (bare PS/2 protocol). + */ + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); /* * Some boxes, such as HP nx7400, get terribly confused if mouse diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index 0236f0d5fd9..e0f30186d51 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -284,13 +284,7 @@ static void serio_handle_event(void) mutex_lock(&serio_mutex); - /* - * Note that we handle only one event here to give swsusp - * a chance to freeze kseriod thread. Serio events should - * be pretty rare so we are not concerned about taking - * performance hit. - */ - if ((event = serio_get_event())) { + while ((event = serio_get_event())) { switch (event->type) { case SERIO_REGISTER_PORT: @@ -380,10 +374,9 @@ static struct serio *serio_get_pending_child(struct serio *parent) static int serio_thread(void *nothing) { - set_freezable(); do { serio_handle_event(); - wait_event_freezable(serio_wait, + wait_event_interruptible(serio_wait, kthread_should_stop() || !list_empty(&serio_event_list)); } while (!kthread_should_stop()); diff --git a/drivers/md/md.c b/drivers/md/md.c index f4f5f82f9f5..dd3dfe42d5a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -386,7 +386,9 @@ static void mddev_put(mddev_t *mddev) if (!atomic_dec_and_lock(&mddev->active, &all_mddevs_lock)) return; if (!mddev->raid_disks && list_empty(&mddev->disks) && - !mddev->hold_active) { + mddev->ctime == 0 && !mddev->hold_active) { + /* Array is not configured at all, and not held active, + * so destroy it */ list_del(&mddev->all_mddevs); if (mddev->gendisk) { /* we did a probe so need to clean up. @@ -4355,7 +4357,7 @@ static int do_md_run(mddev_t * mddev) mddev->barriers_work = 1; mddev->ok_start_degraded = start_dirty_degraded; - if (start_readonly) + if (start_readonly && mddev->ro == 0) mddev->ro = 2; /* read-only, but switch on first write */ err = mddev->pers->run(mddev); @@ -4419,33 +4421,6 @@ static int do_md_run(mddev_t * mddev) set_capacity(disk, mddev->array_sectors); - /* If there is a partially-recovered drive we need to - * start recovery here. If we leave it to md_check_recovery, - * it will remove the drives and not do the right thing - */ - if (mddev->degraded && !mddev->sync_thread) { - int spares = 0; - list_for_each_entry(rdev, &mddev->disks, same_set) - if (rdev->raid_disk >= 0 && - !test_bit(In_sync, &rdev->flags) && - !test_bit(Faulty, &rdev->flags)) - /* complete an interrupted recovery */ - spares++; - if (spares && mddev->pers->sync_request) { - mddev->recovery = 0; - set_bit(MD_RECOVERY_RUNNING, &mddev->recovery); - mddev->sync_thread = md_register_thread(md_do_sync, - mddev, - "resync"); - if (!mddev->sync_thread) { - printk(KERN_ERR "%s: could not start resync" - " thread...\n", - mdname(mddev)); - /* leave the spares where they are, it shouldn't hurt */ - mddev->recovery = 0; - } - } - } md_wakeup_thread(mddev->thread); md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */ @@ -5262,6 +5237,10 @@ static int set_array_info(mddev_t * mddev, mdu_array_info_t *info) mddev->minor_version = info->minor_version; mddev->patch_version = info->patch_version; mddev->persistent = !info->not_persistent; + /* ensure mddev_put doesn't delete this now that there + * is some minimal configuration. + */ + mddev->ctime = get_seconds(); return 0; } mddev->major_version = MD_MAJOR_VERSION; @@ -6494,10 +6473,11 @@ void md_do_sync(mddev_t *mddev) mddev->curr_resync = 2; try_again: - if (kthread_should_stop()) { + if (kthread_should_stop()) set_bit(MD_RECOVERY_INTR, &mddev->recovery); + + if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) goto skip; - } for_each_mddev(mddev2, tmp) { if (mddev2 == mddev) continue; diff --git a/drivers/media/dvb/firewire/firedtv-fw.c b/drivers/media/dvb/firewire/firedtv-fw.c index fe44789ab03..6223bf01efe 100644 --- a/drivers/media/dvb/firewire/firedtv-fw.c +++ b/drivers/media/dvb/firewire/firedtv-fw.c @@ -202,14 +202,8 @@ static void handle_fcp(struct fw_card *card, struct fw_request *request, unsigned long flags; int su; - if ((tcode != TCODE_WRITE_QUADLET_REQUEST && - tcode != TCODE_WRITE_BLOCK_REQUEST) || - offset != CSR_REGISTER_BASE + CSR_FCP_RESPONSE || - length == 0 || - (((u8 *)payload)[0] & 0xf0) != 0) { - fw_send_response(card, request, RCODE_TYPE_ERROR); + if (length < 2 || (((u8 *)payload)[0] & 0xf0) != 0) return; - } su = ((u8 *)payload)[1] & 0x7; @@ -230,10 +224,8 @@ static void handle_fcp(struct fw_card *card, struct fw_request *request, } spin_unlock_irqrestore(&node_list_lock, flags); - if (fdtv) { + if (fdtv) avc_recv(fdtv, payload, length); - fw_send_response(card, request, RCODE_COMPLETE); - } } static struct fw_address_handler fcp_handler = { diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 20d29bafc9f..9df9a5ad38f 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -568,12 +568,12 @@ static void twl4030_sih_do_edge(struct work_struct *work) bytes[byte] &= ~(0x03 << off); - spin_lock_irq(&d->lock); + raw_spin_lock_irq(&d->lock); if (d->status & IRQ_TYPE_EDGE_RISING) bytes[byte] |= BIT(off + 1); if (d->status & IRQ_TYPE_EDGE_FALLING) bytes[byte] |= BIT(off + 0); - spin_unlock_irq(&d->lock); + raw_spin_unlock_irq(&d->lock); edge_change &= ~BIT(i); } diff --git a/drivers/net/3c507.c b/drivers/net/3c507.c index fbc231153e5..77cf0901a44 100644 --- a/drivers/net/3c507.c +++ b/drivers/net/3c507.c @@ -56,6 +56,7 @@ static const char version[] = #include <linux/errno.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/if_ether.h> #include <linux/skbuff.h> #include <linux/slab.h> #include <linux/init.h> @@ -734,8 +735,7 @@ static void init_82586_mem(struct net_device *dev) memcpy_toio(lp->base, init_words + 5, sizeof(init_words) - 10); /* Fill in the station address. */ - memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr, - sizeof(dev->dev_addr)); + memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr, ETH_ALEN); /* The Tx-block list is written as needed. We just set up the values. */ lp->tx_cmd_link = IDLELOOP + 4; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e58a65391ad..dd9a09c72df 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2346,6 +2346,7 @@ config GELIC_NET config GELIC_WIRELESS bool "PS3 Wireless support" + depends on WLAN depends on GELIC_NET select WIRELESS_EXT help @@ -2358,6 +2359,7 @@ config GELIC_WIRELESS config GELIC_WIRELESS_OLD_PSK_INTERFACE bool "PS3 Wireless private PSK interface (OBSOLETE)" depends on GELIC_WIRELESS + select WEXT_PRIV help This option retains the obsolete private interface to pass the PSK from user space programs to the driver. The PSK diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index 9e56014d27e..9fd8e5ecd5d 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -275,6 +275,7 @@ struct be_adapter { u32 tx_fc; /* Tx flow control */ int link_speed; u8 port_type; + u8 transceiver; }; extern const struct ethtool_ops be_ethtool_ops; diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index 1b68bd98dc0..102ade13416 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -1479,6 +1479,41 @@ err: return status; } +int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num, + u8 loopback_type, u8 enable) +{ + struct be_mcc_wrb *wrb; + struct be_cmd_req_set_lmode *req; + int status; + + spin_lock_bh(&adapter->mcc_lock); + + wrb = wrb_from_mccq(adapter); + if (!wrb) { + status = -EBUSY; + goto err; + } + + req = embedded_payload(wrb); + + be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0, + OPCODE_LOWLEVEL_SET_LOOPBACK_MODE); + + be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL, + OPCODE_LOWLEVEL_SET_LOOPBACK_MODE, + sizeof(*req)); + + req->src_port = port_num; + req->dest_port = port_num; + req->loopback_type = loopback_type; + req->loopback_state = enable; + + status = be_mcc_notify_wait(adapter); +err: + spin_unlock_bh(&adapter->mcc_lock); + return status; +} + int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, u32 loopback_type, u32 pkt_size, u32 num_pkts, u64 pattern) { @@ -1501,6 +1536,7 @@ int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL, OPCODE_LOWLEVEL_LOOPBACK_TEST, sizeof(*req)); + req->hdr.timeout = 4; req->pattern = cpu_to_le64(pattern); req->src_port = cpu_to_le32(port_num); diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 92b87ef156e..c002b8391b4 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -155,6 +155,7 @@ struct be_mcc_mailbox { #define OPCODE_LOWLEVEL_HOST_DDR_DMA 17 #define OPCODE_LOWLEVEL_LOOPBACK_TEST 18 +#define OPCODE_LOWLEVEL_SET_LOOPBACK_MODE 19 struct be_cmd_req_hdr { u8 opcode; /* dword 0 */ @@ -821,6 +822,19 @@ struct be_cmd_resp_loopback_test { u32 ticks_compl; }; +struct be_cmd_req_set_lmode { + struct be_cmd_req_hdr hdr; + u8 src_port; + u8 dest_port; + u8 loopback_type; + u8 loopback_state; +}; + +struct be_cmd_resp_set_lmode { + struct be_cmd_resp_hdr resp_hdr; + u8 rsvd0[4]; +}; + /********************** DDR DMA test *********************/ struct be_cmd_req_ddrdma_test { struct be_cmd_req_hdr hdr; @@ -912,3 +926,5 @@ extern int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, u32 num_pkts, u64 pattern); extern int be_cmd_ddr_dma_test(struct be_adapter *adapter, u64 pattern, u32 byte_cnt, struct be_dma_mem *cmd); +extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num, + u8 loopback_type, u8 enable); diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index 298b92cbd68..5d001c4deac 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -118,6 +118,7 @@ static const char et_self_tests[][ETH_GSTRING_LEN] = { #define BE_MAC_LOOPBACK 0x0 #define BE_PHY_LOOPBACK 0x1 #define BE_ONE_PORT_EXT_LOOPBACK 0x2 +#define BE_NO_LOOPBACK 0xff static void be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) @@ -339,28 +340,50 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) status = be_cmd_read_port_type(adapter, adapter->port_num, &connector); - switch (connector) { - case 7: - ecmd->port = PORT_FIBRE; - break; - default: - ecmd->port = PORT_TP; - break; + if (!status) { + switch (connector) { + case 7: + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; + break; + case 0: + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_EXTERNAL; + break; + default: + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_INTERNAL; + break; + } + } else { + ecmd->port = PORT_AUI; + ecmd->transceiver = XCVR_INTERNAL; } /* Save for future use */ adapter->link_speed = ecmd->speed; adapter->port_type = ecmd->port; + adapter->transceiver = ecmd->transceiver; } else { ecmd->speed = adapter->link_speed; ecmd->port = adapter->port_type; + ecmd->transceiver = adapter->transceiver; } ecmd->duplex = DUPLEX_FULL; ecmd->autoneg = AUTONEG_DISABLE; - ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP); ecmd->phy_address = adapter->port_num; - ecmd->transceiver = XCVR_INTERNAL; + switch (ecmd->port) { + case PORT_FIBRE: + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); + break; + case PORT_TP: + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP); + break; + case PORT_AUI: + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_AUI); + break; + } return 0; } @@ -489,6 +512,19 @@ err: return ret; } +static u64 be_loopback_test(struct be_adapter *adapter, u8 loopback_type, + u64 *status) +{ + be_cmd_set_loopback(adapter, adapter->port_num, + loopback_type, 1); + *status = be_cmd_loopback_test(adapter, adapter->port_num, + loopback_type, 1500, + 2, 0xabc); + be_cmd_set_loopback(adapter, adapter->port_num, + BE_NO_LOOPBACK, 1); + return *status; +} + static void be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data) { @@ -497,23 +533,18 @@ be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data) memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM); if (test->flags & ETH_TEST_FL_OFFLINE) { - data[0] = be_cmd_loopback_test(adapter, adapter->port_num, - BE_MAC_LOOPBACK, 1500, - 2, 0xabc); - if (data[0] != 0) + if (be_loopback_test(adapter, BE_MAC_LOOPBACK, + &data[0]) != 0) { test->flags |= ETH_TEST_FL_FAILED; - - data[1] = be_cmd_loopback_test(adapter, adapter->port_num, - BE_PHY_LOOPBACK, 1500, - 2, 0xabc); - if (data[1] != 0) + } + if (be_loopback_test(adapter, BE_PHY_LOOPBACK, + &data[1]) != 0) { test->flags |= ETH_TEST_FL_FAILED; - - data[2] = be_cmd_loopback_test(adapter, adapter->port_num, - BE_ONE_PORT_EXT_LOOPBACK, - 1500, 2, 0xabc); - if (data[2] != 0) + } + if (be_loopback_test(adapter, BE_ONE_PORT_EXT_LOOPBACK, + &data[2]) != 0) { test->flags |= ETH_TEST_FL_FAILED; + } data[3] = be_test_ddr_dma(adapter); if (data[3] != 0) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 77ba13520d8..306c2b8165e 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -7593,6 +7593,8 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) if (bp->cnic_eth_dev.drv_state & CNIC_DRV_STATE_REGD) { bnx2x_set_iscsi_eth_mac_addr(bp, 1); bp->cnic_flags |= BNX2X_CNIC_FLAG_MAC_SET; + bnx2x_init_sb(bp, bp->cnic_sb, bp->cnic_sb_mapping, + CNIC_SB_ID(bp)); } mutex_unlock(&bp->cnic_mutex); #endif diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 0fb7a4964e7..822f586d72a 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1580,7 +1580,7 @@ static void ad_agg_selection_logic(struct aggregator *agg) // check if any partner replys if (best->is_individual) { pr_warning("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n", - best->slave->dev->master->name); + best->slave ? best->slave->dev->master->name : "NULL"); } best->is_active = 1; diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index e0620d08464..8bd3c9f1753 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -143,7 +143,6 @@ void gfar_start(struct net_device *dev); static void gfar_clear_exact_match(struct net_device *dev); static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr); static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -u16 gfar_select_queue(struct net_device *dev, struct sk_buff *skb); MODULE_AUTHOR("Freescale Semiconductor, Inc"); MODULE_DESCRIPTION("Gianfar Ethernet Driver"); @@ -455,7 +454,6 @@ static const struct net_device_ops gfar_netdev_ops = { .ndo_set_multicast_list = gfar_set_multi, .ndo_tx_timeout = gfar_timeout, .ndo_do_ioctl = gfar_ioctl, - .ndo_select_queue = gfar_select_queue, .ndo_get_stats = gfar_get_stats, .ndo_vlan_rx_register = gfar_vlan_rx_register, .ndo_set_mac_address = eth_mac_addr, @@ -506,10 +504,6 @@ static inline int gfar_uses_fcb(struct gfar_private *priv) return priv->vlgrp || priv->rx_csum_enable; } -u16 gfar_select_queue(struct net_device *dev, struct sk_buff *skb) -{ - return skb_get_queue_mapping(skb); -} static void free_tx_pointers(struct gfar_private *priv) { int i = 0; @@ -2470,10 +2464,11 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, fcb = (struct rxfcb *)skb->data; /* Remove the FCB from the skb */ - skb_set_queue_mapping(skb, fcb->rq); /* Remove the padded bytes, if there are any */ - if (amount_pull) + if (amount_pull) { + skb_record_rx_queue(skb, fcb->rq); skb_pull(skb, amount_pull); + } if (priv->rx_csum_enable) gfar_rx_checksum(skb, fcb); @@ -2554,7 +2549,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) /* Remove the FCS from the packet length */ skb_put(skb, pkt_len); rx_queue->stats.rx_bytes += pkt_len; - + skb_record_rx_queue(skb, rx_queue->qindex); gfar_process_frame(dev, skb, amount_pull); } else { diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c index 090a6d3af11..052c74091d9 100644 --- a/drivers/net/ibmlana.c +++ b/drivers/net/ibmlana.c @@ -87,6 +87,7 @@ History: #include <linux/module.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/if_ether.h> #include <linux/skbuff.h> #include <linux/bitops.h> @@ -988,7 +989,7 @@ static int __devinit ibmlana_init_one(struct device *kdev) /* copy out MAC address */ - for (z = 0; z < sizeof(dev->dev_addr); z++) + for (z = 0; z < ETH_ALEN; z++) dev->dev_addr[z] = inb(dev->base_addr + MACADDRPROM + z); /* print config */ diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index e8e9e9194a8..c505b50d1fa 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -1096,9 +1096,7 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg); } else { /* Set PCS register for forced link */ - reg |= E1000_PCS_LCTL_FSD | /* Force Speed */ - E1000_PCS_LCTL_FORCE_LINK | /* Force Link */ - E1000_PCS_LCTL_FLV_LINK_UP; /* Force link value up */ + reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg); } diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index 5c9d73e9bb8..3670a66401b 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -457,15 +457,6 @@ s32 igb_copper_link_setup_82580(struct e1000_hw *hw) phy_data |= I82580_CFG_ENABLE_DOWNSHIFT; ret_val = phy->ops.write_reg(hw, I82580_CFG_REG, phy_data); - if (ret_val) - goto out; - - /* Set number of link attempts before downshift */ - ret_val = phy->ops.read_reg(hw, I82580_CTRL_REG, &phy_data); - if (ret_val) - goto out; - phy_data &= ~I82580_CTRL_DOWNSHIFT_MASK; - ret_val = phy->ops.write_reg(hw, I82580_CTRL_REG, phy_data); out: return ret_val; diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index ac9d5272650..f771a6c0877 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -1795,7 +1795,7 @@ static int igb_wol_exclusion(struct igb_adapter *adapter, /* dual port cards only support WoL on port A from now on * unless it was enabled in the eeprom for port B * so exclude FUNC_1 ports from having WoL enabled */ - if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1 && + if ((rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) && !adapter->eeprom_wol) { wol->supported = 0; break; diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 78963a0e128..933c64ff246 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1306,13 +1306,8 @@ void igb_reset(struct igb_adapter *adapter) hwm = min(((pba << 10) * 9 / 10), ((pba << 10) - 2 * adapter->max_frame_size)); - if (mac->type < e1000_82576) { - fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */ - fc->low_water = fc->high_water - 8; - } else { - fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */ - fc->low_water = fc->high_water - 16; - } + fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */ + fc->low_water = fc->high_water - 16; fc->pause_time = 0xFFFF; fc->send_xon = 1; fc->current_mode = fc->requested_mode; diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index e9dd95f136a..0dbd0320023 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -2763,7 +2763,8 @@ static int __devinit igbvf_probe(struct pci_dev *pdev, err = hw->mac.ops.reset_hw(hw); if (err) { dev_info(&pdev->dev, - "PF still in reset state, assigning new address\n"); + "PF still in reset state, assigning new address." + " Is the PF interface up?\n"); random_ether_addr(hw->mac.addr); } else { err = hw->mac.ops.read_mac_addr(hw); diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index bd64387563f..1a2ea621e37 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -4373,6 +4373,11 @@ static int ixgbe_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); + /* + * pci_restore_state clears dev->state_saved so call + * pci_save_state to restore it. + */ + pci_save_state(pdev); err = pci_enable_device_mem(pdev); if (err) { diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index dcc67a35e8f..e154677ff70 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -45,6 +45,7 @@ static const char *const version = #include <linux/crc32.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/if_ether.h> #include <linux/skbuff.h> #include <linux/spinlock.h> #include <linux/moduleparam.h> @@ -1765,7 +1766,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) /* if the ethernet address is not valid, force to 00:00:00:00:00:00 */ if (!is_valid_ether_addr(dev->perm_addr)) - memset(dev->dev_addr, 0, sizeof(dev->dev_addr)); + memset(dev->dev_addr, 0, ETH_ALEN); if (pcnet32_debug & NETIF_MSG_PROBE) { printk(" %pM", dev->dev_addr); diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index f983e3b507c..103e8b0e2a0 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -741,14 +741,14 @@ static int efx_probe_port(struct efx_nic *efx) EFX_LOG(efx, "create port\n"); + if (phy_flash_cfg) + efx->phy_mode = PHY_MODE_SPECIAL; + /* Connect up MAC/PHY operations table */ rc = efx->type->probe_port(efx); if (rc) goto err; - if (phy_flash_cfg) - efx->phy_mode = PHY_MODE_SPECIAL; - /* Sanity check MAC address */ if (is_valid_ether_addr(efx->mac_address)) { memcpy(efx->net_dev->dev_addr, efx->mac_address, ETH_ALEN); diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 17afcd26e87..9d009c46e96 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -925,6 +925,7 @@ static int falcon_probe_port(struct efx_nic *efx) static void falcon_remove_port(struct efx_nic *efx) { + efx->phy_op->remove(efx); efx_nic_free_buffer(efx, &efx->stats_buffer); } diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c index 3da933f8f07..8ccab2c67a2 100644 --- a/drivers/net/sfc/falcon_xmac.c +++ b/drivers/net/sfc/falcon_xmac.c @@ -111,16 +111,12 @@ static void falcon_mask_status_intr(struct efx_nic *efx, bool enable) efx_writeo(efx, ®, FR_AB_XM_MGT_INT_MASK); } -/* Get status of XAUI link */ -static bool falcon_xaui_link_ok(struct efx_nic *efx) +static bool falcon_xgxs_link_ok(struct efx_nic *efx) { efx_oword_t reg; bool align_done, link_ok = false; int sync_status; - if (LOOPBACK_INTERNAL(efx)) - return true; - /* Read link status */ efx_reado(efx, ®, FR_AB_XX_CORE_STAT); @@ -135,14 +131,24 @@ static bool falcon_xaui_link_ok(struct efx_nic *efx) EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_DISPERR, FFE_AB_XX_STAT_ALL_LANES); efx_writeo(efx, ®, FR_AB_XX_CORE_STAT); - /* If the link is up, then check the phy side of the xaui link */ - if (efx->link_state.up && link_ok) - if (efx->mdio.mmds & (1 << MDIO_MMD_PHYXS)) - link_ok = efx_mdio_phyxgxs_lane_sync(efx); - return link_ok; } +static bool falcon_xmac_link_ok(struct efx_nic *efx) +{ + /* + * Check MAC's XGXS link status except when using XGMII loopback + * which bypasses the XGXS block. + * If possible, check PHY's XGXS link status except when using + * MAC loopback. + */ + return (efx->loopback_mode == LOOPBACK_XGMII || + falcon_xgxs_link_ok(efx)) && + (!(efx->mdio.mmds & (1 << MDIO_MMD_PHYXS)) || + LOOPBACK_INTERNAL(efx) || + efx_mdio_phyxgxs_lane_sync(efx)); +} + void falcon_reconfigure_xmac_core(struct efx_nic *efx) { unsigned int max_frame_len; @@ -245,9 +251,9 @@ static void falcon_reconfigure_xgxs_core(struct efx_nic *efx) /* Try to bring up the Falcon side of the Falcon-Phy XAUI link */ -static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries) +static bool falcon_xmac_link_ok_retry(struct efx_nic *efx, int tries) { - bool mac_up = falcon_xaui_link_ok(efx); + bool mac_up = falcon_xmac_link_ok(efx); if (LOOPBACK_MASK(efx) & LOOPBACKS_EXTERNAL(efx) & LOOPBACKS_WS || efx_phy_mode_disabled(efx->phy_mode)) @@ -261,7 +267,7 @@ static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries) falcon_reset_xaui(efx); udelay(200); - mac_up = falcon_xaui_link_ok(efx); + mac_up = falcon_xmac_link_ok(efx); --tries; } @@ -272,7 +278,7 @@ static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries) static bool falcon_xmac_check_fault(struct efx_nic *efx) { - return !falcon_check_xaui_link_up(efx, 5); + return !falcon_xmac_link_ok_retry(efx, 5); } static int falcon_reconfigure_xmac(struct efx_nic *efx) @@ -284,7 +290,7 @@ static int falcon_reconfigure_xmac(struct efx_nic *efx) falcon_reconfigure_mac_wrapper(efx); - efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 5); + efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 5); falcon_mask_status_intr(efx, true); return 0; @@ -357,7 +363,7 @@ void falcon_poll_xmac(struct efx_nic *efx) return; falcon_mask_status_intr(efx, false); - efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 1); + efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 1); falcon_mask_status_intr(efx, true); } diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c index 0e1bcc5a0d5..eb694af7a47 100644 --- a/drivers/net/sfc/mcdi_phy.c +++ b/drivers/net/sfc/mcdi_phy.c @@ -304,31 +304,47 @@ static u32 mcdi_to_ethtool_media(u32 media) static int efx_mcdi_phy_probe(struct efx_nic *efx) { - struct efx_mcdi_phy_cfg *phy_cfg; + struct efx_mcdi_phy_cfg *phy_data; + u8 outbuf[MC_CMD_GET_LINK_OUT_LEN]; + u32 caps; int rc; - /* TODO: Move phy_data initialisation to - * phy_op->probe/remove, rather than init/fini */ - phy_cfg = kzalloc(sizeof(*phy_cfg), GFP_KERNEL); - if (phy_cfg == NULL) { - rc = -ENOMEM; - goto fail_alloc; - } - rc = efx_mcdi_get_phy_cfg(efx, phy_cfg); + /* Initialise and populate phy_data */ + phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); + if (phy_data == NULL) + return -ENOMEM; + + rc = efx_mcdi_get_phy_cfg(efx, phy_data); if (rc != 0) goto fail; - efx->phy_type = phy_cfg->type; + /* Read initial link advertisement */ + BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0); + rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0, + outbuf, sizeof(outbuf), NULL); + if (rc) + goto fail; + + /* Fill out nic state */ + efx->phy_data = phy_data; + efx->phy_type = phy_data->type; - efx->mdio_bus = phy_cfg->channel; - efx->mdio.prtad = phy_cfg->port; - efx->mdio.mmds = phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22); + efx->mdio_bus = phy_data->channel; + efx->mdio.prtad = phy_data->port; + efx->mdio.mmds = phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22); efx->mdio.mode_support = 0; - if (phy_cfg->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22)) + if (phy_data->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22)) efx->mdio.mode_support |= MDIO_SUPPORTS_C22; - if (phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22)) + if (phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22)) efx->mdio.mode_support |= MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP); + if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN)) + efx->link_advertising = + mcdi_to_ethtool_cap(phy_data->media, caps); + else + phy_data->forced_cap = caps; + /* Assert that we can map efx -> mcdi loopback modes */ BUILD_BUG_ON(LOOPBACK_NONE != MC_CMD_LOOPBACK_NONE); BUILD_BUG_ON(LOOPBACK_DATA != MC_CMD_LOOPBACK_DATA); @@ -365,46 +381,6 @@ static int efx_mcdi_phy_probe(struct efx_nic *efx) * but by convention we don't */ efx->loopback_modes &= ~(1 << LOOPBACK_NONE); - kfree(phy_cfg); - - return 0; - -fail: - kfree(phy_cfg); -fail_alloc: - return rc; -} - -static int efx_mcdi_phy_init(struct efx_nic *efx) -{ - struct efx_mcdi_phy_cfg *phy_data; - u8 outbuf[MC_CMD_GET_LINK_OUT_LEN]; - u32 caps; - int rc; - - phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); - if (phy_data == NULL) - return -ENOMEM; - - rc = efx_mcdi_get_phy_cfg(efx, phy_data); - if (rc != 0) - goto fail; - - efx->phy_data = phy_data; - - BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0); - rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0, - outbuf, sizeof(outbuf), NULL); - if (rc) - goto fail; - - caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP); - if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN)) - efx->link_advertising = - mcdi_to_ethtool_cap(phy_data->media, caps); - else - phy_data->forced_cap = caps; - return 0; fail: @@ -504,7 +480,7 @@ static bool efx_mcdi_phy_poll(struct efx_nic *efx) return !efx_link_state_equal(&efx->link_state, &old_state); } -static void efx_mcdi_phy_fini(struct efx_nic *efx) +static void efx_mcdi_phy_remove(struct efx_nic *efx) { struct efx_mcdi_phy_data *phy_data = efx->phy_data; @@ -586,10 +562,11 @@ static int efx_mcdi_phy_set_settings(struct efx_nic *efx, struct ethtool_cmd *ec struct efx_phy_operations efx_mcdi_phy_ops = { .probe = efx_mcdi_phy_probe, - .init = efx_mcdi_phy_init, + .init = efx_port_dummy_op_int, .reconfigure = efx_mcdi_phy_reconfigure, .poll = efx_mcdi_phy_poll, - .fini = efx_mcdi_phy_fini, + .fini = efx_port_dummy_op_void, + .remove = efx_mcdi_phy_remove, .get_settings = efx_mcdi_phy_get_settings, .set_settings = efx_mcdi_phy_set_settings, .run_tests = NULL, diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 34c381f009b..d5aab5b3fa0 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -524,6 +524,7 @@ struct efx_phy_operations { int (*probe) (struct efx_nic *efx); int (*init) (struct efx_nic *efx); void (*fini) (struct efx_nic *efx); + void (*remove) (struct efx_nic *efx); int (*reconfigure) (struct efx_nic *efx); bool (*poll) (struct efx_nic *efx); void (*get_settings) (struct efx_nic *efx, diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c index a577be22786..db44224ed2c 100644 --- a/drivers/net/sfc/nic.c +++ b/drivers/net/sfc/nic.c @@ -1576,6 +1576,8 @@ void efx_nic_init_common(struct efx_nic *efx) EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_SOFT_EVT_EN, 1); /* Prefetch threshold 2 => fetch when descriptor cache half empty */ EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_THRESHOLD, 2); + /* Disable hardware watchdog which can misfire */ + EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_WD_TMR, 0x3fffff); /* Squash TX of packets of 16 bytes or less */ if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) EFX_SET_OWORD_FIELD(temp, FRF_BZ_TX_FLUSH_MIN_LEN_EN, 1); diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index 3800fc791b2..ff8f0a417fa 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -33,6 +33,9 @@ #define PCS_FW_HEARTBEAT_REG 0xd7ee #define PCS_FW_HEARTB_LBN 0 #define PCS_FW_HEARTB_WIDTH 8 +#define PCS_FW_PRODUCT_CODE_1 0xd7f0 +#define PCS_FW_VERSION_1 0xd7f3 +#define PCS_FW_BUILD_1 0xd7f6 #define PCS_UC8051_STATUS_REG 0xd7fd #define PCS_UC_STATUS_LBN 0 #define PCS_UC_STATUS_WIDTH 8 @@ -52,14 +55,24 @@ void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode) struct qt202x_phy_data { enum efx_phy_mode phy_mode; + bool bug17190_in_bad_state; + unsigned long bug17190_timer; + u32 firmware_ver; }; #define QT2022C2_MAX_RESET_TIME 500 #define QT2022C2_RESET_WAIT 10 -static int qt2025c_wait_reset(struct efx_nic *efx) +#define QT2025C_MAX_HEARTB_TIME (5 * HZ) +#define QT2025C_HEARTB_WAIT 100 +#define QT2025C_MAX_FWSTART_TIME (25 * HZ / 10) +#define QT2025C_FWSTART_WAIT 100 + +#define BUG17190_INTERVAL (2 * HZ) + +static int qt2025c_wait_heartbeat(struct efx_nic *efx) { - unsigned long timeout = jiffies + 10 * HZ; + unsigned long timeout = jiffies + QT2025C_MAX_HEARTB_TIME; int reg, old_counter = 0; /* Wait for firmware heartbeat to start */ @@ -74,11 +87,25 @@ static int qt2025c_wait_reset(struct efx_nic *efx) old_counter = counter; else if (counter != old_counter) break; - if (time_after(jiffies, timeout)) + if (time_after(jiffies, timeout)) { + /* Some cables have EEPROMs that conflict with the + * PHY's on-board EEPROM so it cannot load firmware */ + EFX_ERR(efx, "If an SFP+ direct attach cable is" + " connected, please check that it complies" + " with the SFP+ specification\n"); return -ETIMEDOUT; - msleep(10); + } + msleep(QT2025C_HEARTB_WAIT); } + return 0; +} + +static int qt2025c_wait_fw_status_good(struct efx_nic *efx) +{ + unsigned long timeout = jiffies + QT2025C_MAX_FWSTART_TIME; + int reg; + /* Wait for firmware status to look good */ for (;;) { reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG); @@ -90,7 +117,178 @@ static int qt2025c_wait_reset(struct efx_nic *efx) break; if (time_after(jiffies, timeout)) return -ETIMEDOUT; + msleep(QT2025C_FWSTART_WAIT); + } + + return 0; +} + +static void qt2025c_restart_firmware(struct efx_nic *efx) +{ + /* Restart microcontroller execution of firmware from RAM */ + efx_mdio_write(efx, 3, 0xe854, 0x00c0); + efx_mdio_write(efx, 3, 0xe854, 0x0040); + msleep(50); +} + +static int qt2025c_wait_reset(struct efx_nic *efx) +{ + int rc; + + rc = qt2025c_wait_heartbeat(efx); + if (rc != 0) + return rc; + + rc = qt2025c_wait_fw_status_good(efx); + if (rc == -ETIMEDOUT) { + /* Bug 17689: occasionally heartbeat starts but firmware status + * code never progresses beyond 0x00. Try again, once, after + * restarting execution of the firmware image. */ + EFX_LOG(efx, "bashing QT2025C microcontroller\n"); + qt2025c_restart_firmware(efx); + rc = qt2025c_wait_heartbeat(efx); + if (rc != 0) + return rc; + rc = qt2025c_wait_fw_status_good(efx); + } + + return rc; +} + +static void qt2025c_firmware_id(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data = efx->phy_data; + u8 firmware_id[9]; + size_t i; + + for (i = 0; i < sizeof(firmware_id); i++) + firmware_id[i] = efx_mdio_read(efx, MDIO_MMD_PCS, + PCS_FW_PRODUCT_CODE_1 + i); + EFX_INFO(efx, "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n", + (firmware_id[0] << 8) | firmware_id[1], firmware_id[2], + firmware_id[3] >> 4, firmware_id[3] & 0xf, + firmware_id[4], firmware_id[5], + firmware_id[6], firmware_id[7], firmware_id[8]); + phy_data->firmware_ver = ((firmware_id[3] & 0xf0) << 20) | + ((firmware_id[3] & 0x0f) << 16) | + (firmware_id[4] << 8) | firmware_id[5]; +} + +static void qt2025c_bug17190_workaround(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data = efx->phy_data; + + /* The PHY can get stuck in a state where it reports PHY_XS and PMA/PMD + * layers up, but PCS down (no block_lock). If we notice this state + * persisting for a couple of seconds, we switch PMA/PMD loopback + * briefly on and then off again, which is normally sufficient to + * recover it. + */ + if (efx->link_state.up || + !efx_mdio_links_ok(efx, MDIO_DEVS_PMAPMD | MDIO_DEVS_PHYXS)) { + phy_data->bug17190_in_bad_state = false; + return; + } + + if (!phy_data->bug17190_in_bad_state) { + phy_data->bug17190_in_bad_state = true; + phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL; + return; + } + + if (time_after_eq(jiffies, phy_data->bug17190_timer)) { + EFX_LOG(efx, "bashing QT2025C PMA/PMD\n"); + efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1, + MDIO_PMA_CTRL1_LOOPBACK, true); msleep(100); + efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1, + MDIO_PMA_CTRL1_LOOPBACK, false); + phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL; + } +} + +static int qt2025c_select_phy_mode(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data = efx->phy_data; + struct falcon_board *board = falcon_board(efx); + int reg, rc, i; + uint16_t phy_op_mode; + + /* Only 2.0.1.0+ PHY firmware supports the more optimal SFP+ + * Self-Configure mode. Don't attempt any switching if we encounter + * older firmware. */ + if (phy_data->firmware_ver < 0x02000100) + return 0; + + /* In general we will get optimal behaviour in "SFP+ Self-Configure" + * mode; however, that powers down most of the PHY when no module is + * present, so we must use a different mode (any fixed mode will do) + * to be sure that loopbacks will work. */ + phy_op_mode = (efx->loopback_mode == LOOPBACK_NONE) ? 0x0038 : 0x0020; + + /* Only change mode if really necessary */ + reg = efx_mdio_read(efx, 1, 0xc319); + if ((reg & 0x0038) == phy_op_mode) + return 0; + EFX_LOG(efx, "Switching PHY to mode 0x%04x\n", phy_op_mode); + + /* This sequence replicates the register writes configured in the boot + * EEPROM (including the differences between board revisions), except + * that the operating mode is changed, and the PHY is prevented from + * unnecessarily reloading the main firmware image again. */ + efx_mdio_write(efx, 1, 0xc300, 0x0000); + /* (Note: this portion of the boot EEPROM sequence, which bit-bashes 9 + * STOPs onto the firmware/module I2C bus to reset it, varies across + * board revisions, as the bus is connected to different GPIO/LED + * outputs on the PHY.) */ + if (board->major == 0 && board->minor < 2) { + efx_mdio_write(efx, 1, 0xc303, 0x4498); + for (i = 0; i < 9; i++) { + efx_mdio_write(efx, 1, 0xc303, 0x4488); + efx_mdio_write(efx, 1, 0xc303, 0x4480); + efx_mdio_write(efx, 1, 0xc303, 0x4490); + efx_mdio_write(efx, 1, 0xc303, 0x4498); + } + } else { + efx_mdio_write(efx, 1, 0xc303, 0x0920); + efx_mdio_write(efx, 1, 0xd008, 0x0004); + for (i = 0; i < 9; i++) { + efx_mdio_write(efx, 1, 0xc303, 0x0900); + efx_mdio_write(efx, 1, 0xd008, 0x0005); + efx_mdio_write(efx, 1, 0xc303, 0x0920); + efx_mdio_write(efx, 1, 0xd008, 0x0004); + } + efx_mdio_write(efx, 1, 0xc303, 0x4900); + } + efx_mdio_write(efx, 1, 0xc303, 0x4900); + efx_mdio_write(efx, 1, 0xc302, 0x0004); + efx_mdio_write(efx, 1, 0xc316, 0x0013); + efx_mdio_write(efx, 1, 0xc318, 0x0054); + efx_mdio_write(efx, 1, 0xc319, phy_op_mode); + efx_mdio_write(efx, 1, 0xc31a, 0x0098); + efx_mdio_write(efx, 3, 0x0026, 0x0e00); + efx_mdio_write(efx, 3, 0x0027, 0x0013); + efx_mdio_write(efx, 3, 0x0028, 0xa528); + efx_mdio_write(efx, 1, 0xd006, 0x000a); + efx_mdio_write(efx, 1, 0xd007, 0x0009); + efx_mdio_write(efx, 1, 0xd008, 0x0004); + /* This additional write is not present in the boot EEPROM. It + * prevents the PHY's internal boot ROM doing another pointless (and + * slow) reload of the firmware image (the microcontroller's code + * memory is not affected by the microcontroller reset). */ + efx_mdio_write(efx, 1, 0xc317, 0x00ff); + efx_mdio_write(efx, 1, 0xc300, 0x0002); + msleep(20); + + /* Restart microcontroller execution of firmware from RAM */ + qt2025c_restart_firmware(efx); + + /* Wait for the microcontroller to be ready again */ + rc = qt2025c_wait_reset(efx); + if (rc < 0) { + EFX_ERR(efx, "PHY microcontroller reset during mode switch " + "timed out\n"); + return rc; } return 0; @@ -137,6 +335,16 @@ static int qt202x_reset_phy(struct efx_nic *efx) static int qt202x_phy_probe(struct efx_nic *efx) { + struct qt202x_phy_data *phy_data; + + phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; + efx->phy_data = phy_data; + phy_data->phy_mode = efx->phy_mode; + phy_data->bug17190_in_bad_state = false; + phy_data->bug17190_timer = 0; + efx->mdio.mmds = QT202X_REQUIRED_DEVS; efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; efx->loopback_modes = QT202X_LOOPBACKS | FALCON_XMAC_LOOPBACKS; @@ -145,7 +353,6 @@ static int qt202x_phy_probe(struct efx_nic *efx) static int qt202x_phy_init(struct efx_nic *efx) { - struct qt202x_phy_data *phy_data; u32 devid; int rc; @@ -155,17 +362,14 @@ static int qt202x_phy_init(struct efx_nic *efx) return rc; } - phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL); - if (!phy_data) - return -ENOMEM; - efx->phy_data = phy_data; - devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS); EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n", devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid), efx_mdio_id_rev(devid)); - phy_data->phy_mode = efx->phy_mode; + if (efx->phy_type == PHY_TYPE_QT2025C) + qt2025c_firmware_id(efx); + return 0; } @@ -183,6 +387,9 @@ static bool qt202x_phy_poll(struct efx_nic *efx) efx->link_state.fd = true; efx->link_state.fc = efx->wanted_fc; + if (efx->phy_type == PHY_TYPE_QT2025C) + qt2025c_bug17190_workaround(efx); + return efx->link_state.up != was_up; } @@ -191,6 +398,10 @@ static int qt202x_phy_reconfigure(struct efx_nic *efx) struct qt202x_phy_data *phy_data = efx->phy_data; if (efx->phy_type == PHY_TYPE_QT2025C) { + int rc = qt2025c_select_phy_mode(efx); + if (rc) + return rc; + /* There are several different register bits which can * disable TX (and save power) on direct-attach cables * or optical transceivers, varying somewhat between @@ -224,7 +435,7 @@ static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecm mdio45_ethtool_gset(&efx->mdio, ecmd); } -static void qt202x_phy_fini(struct efx_nic *efx) +static void qt202x_phy_remove(struct efx_nic *efx) { /* Free the context block */ kfree(efx->phy_data); @@ -236,7 +447,8 @@ struct efx_phy_operations falcon_qt202x_phy_ops = { .init = qt202x_phy_init, .reconfigure = qt202x_phy_reconfigure, .poll = qt202x_phy_poll, - .fini = qt202x_phy_fini, + .fini = efx_port_dummy_op_void, + .remove = qt202x_phy_remove, .get_settings = qt202x_phy_get_settings, .set_settings = efx_mdio_set_settings, }; diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c index de07a4f031b..f8c6771e66d 100644 --- a/drivers/net/sfc/siena.c +++ b/drivers/net/sfc/siena.c @@ -133,6 +133,7 @@ static int siena_probe_port(struct efx_nic *efx) void siena_remove_port(struct efx_nic *efx) { + efx->phy_op->remove(efx); efx_nic_free_buffer(efx, &efx->stats_buffer); } diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index ca11572a49a..3009c297c13 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -202,10 +202,14 @@ static ssize_t set_phy_short_reach(struct device *dev, int rc; rtnl_lock(); - efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR, - MDIO_PMA_10GBT_TXPWR_SHORT, - count != 0 && *buf != '0'); - rc = efx_reconfigure_port(efx); + if (efx->state != STATE_RUNNING) { + rc = -EBUSY; + } else { + efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR, + MDIO_PMA_10GBT_TXPWR_SHORT, + count != 0 && *buf != '0'); + rc = efx_reconfigure_port(efx); + } rtnl_unlock(); return rc < 0 ? rc : (ssize_t)count; @@ -298,36 +302,62 @@ static int tenxpress_init(struct efx_nic *efx) return 0; } -static int sfx7101_phy_probe(struct efx_nic *efx) +static int tenxpress_phy_probe(struct efx_nic *efx) { - efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; - efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; - efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS; - return 0; -} + struct tenxpress_phy_data *phy_data; + int rc; + + /* Allocate phy private storage */ + phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; + efx->phy_data = phy_data; + phy_data->phy_mode = efx->phy_mode; + + /* Create any special files */ + if (efx->phy_type == PHY_TYPE_SFT9001B) { + rc = device_create_file(&efx->pci_dev->dev, + &dev_attr_phy_short_reach); + if (rc) + goto fail; + } + + if (efx->phy_type == PHY_TYPE_SFX7101) { + efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; + efx->mdio.mode_support = MDIO_SUPPORTS_C45; + + efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS; + + efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | + ADVERTISED_10000baseT_Full); + } else { + efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; + efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + + efx->loopback_modes = (SFT9001_LOOPBACKS | + FALCON_XMAC_LOOPBACKS | + FALCON_GMAC_LOOPBACKS); + + efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | + ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_100baseT_Full); + } -static int sft9001_phy_probe(struct efx_nic *efx) -{ - efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; - efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; - efx->loopback_modes = (SFT9001_LOOPBACKS | FALCON_XMAC_LOOPBACKS | - FALCON_GMAC_LOOPBACKS); return 0; + +fail: + kfree(efx->phy_data); + efx->phy_data = NULL; + return rc; } static int tenxpress_phy_init(struct efx_nic *efx) { - struct tenxpress_phy_data *phy_data; - int rc = 0; + int rc; falcon_board(efx)->type->init_phy(efx); - phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); - if (!phy_data) - return -ENOMEM; - efx->phy_data = phy_data; - phy_data->phy_mode = efx->phy_mode; - if (!(efx->phy_mode & PHY_MODE_SPECIAL)) { if (efx->phy_type == PHY_TYPE_SFT9001A) { int reg; @@ -341,44 +371,27 @@ static int tenxpress_phy_init(struct efx_nic *efx) rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); if (rc < 0) - goto fail; + return rc; rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0); if (rc < 0) - goto fail; + return rc; } rc = tenxpress_init(efx); if (rc < 0) - goto fail; + return rc; - /* Initialise advertising flags */ - efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | - ADVERTISED_10000baseT_Full); - if (efx->phy_type != PHY_TYPE_SFX7101) - efx->link_advertising |= (ADVERTISED_1000baseT_Full | - ADVERTISED_100baseT_Full); + /* Reinitialise flow control settings */ efx_link_set_wanted_fc(efx, efx->wanted_fc); efx_mdio_an_reconfigure(efx); - if (efx->phy_type == PHY_TYPE_SFT9001B) { - rc = device_create_file(&efx->pci_dev->dev, - &dev_attr_phy_short_reach); - if (rc) - goto fail; - } - schedule_timeout_uninterruptible(HZ / 5); /* 200ms */ /* Let XGXS and SerDes out of reset */ falcon_reset_xaui(efx); return 0; - - fail: - kfree(efx->phy_data); - efx->phy_data = NULL; - return rc; } /* Perform a "special software reset" on the PHY. The caller is @@ -589,25 +602,26 @@ static bool tenxpress_phy_poll(struct efx_nic *efx) return !efx_link_state_equal(&efx->link_state, &old_state); } -static void tenxpress_phy_fini(struct efx_nic *efx) +static void sfx7101_phy_fini(struct efx_nic *efx) { int reg; + /* Power down the LNPGA */ + reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); + efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); + + /* Waiting here ensures that the board fini, which can turn + * off the power to the PHY, won't get run until the LNPGA + * powerdown has been given long enough to complete. */ + schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ +} + +static void tenxpress_phy_remove(struct efx_nic *efx) +{ if (efx->phy_type == PHY_TYPE_SFT9001B) device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_short_reach); - if (efx->phy_type == PHY_TYPE_SFX7101) { - /* Power down the LNPGA */ - reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); - efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); - - /* Waiting here ensures that the board fini, which can turn - * off the power to the PHY, won't get run until the LNPGA - * powerdown has been given long enough to complete. */ - schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ - } - kfree(efx->phy_data); efx->phy_data = NULL; } @@ -819,11 +833,12 @@ static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising) } struct efx_phy_operations falcon_sfx7101_phy_ops = { - .probe = sfx7101_phy_probe, + .probe = tenxpress_phy_probe, .init = tenxpress_phy_init, .reconfigure = tenxpress_phy_reconfigure, .poll = tenxpress_phy_poll, - .fini = tenxpress_phy_fini, + .fini = sfx7101_phy_fini, + .remove = tenxpress_phy_remove, .get_settings = tenxpress_get_settings, .set_settings = tenxpress_set_settings, .set_npage_adv = sfx7101_set_npage_adv, @@ -832,11 +847,12 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = { }; struct efx_phy_operations falcon_sft9001_phy_ops = { - .probe = sft9001_phy_probe, + .probe = tenxpress_phy_probe, .init = tenxpress_phy_init, .reconfigure = tenxpress_phy_reconfigure, .poll = tenxpress_phy_poll, - .fini = tenxpress_phy_fini, + .fini = efx_port_dummy_op_void, + .remove = tenxpress_phy_remove, .get_settings = tenxpress_get_settings, .set_settings = tenxpress_set_settings, .set_npage_adv = sft9001_set_npage_adv, diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c index e669f94e821..a8b70ef6d81 100644 --- a/drivers/net/sfc/tx.c +++ b/drivers/net/sfc/tx.c @@ -821,8 +821,6 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue) EFX_TXQ_MASK]; efx_tsoh_free(tx_queue, buffer); EFX_BUG_ON_PARANOID(buffer->skb); - buffer->len = 0; - buffer->continuation = true; if (buffer->unmap_len) { unmap_addr = (buffer->dma_addr + buffer->len - buffer->unmap_len); @@ -836,6 +834,8 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue) PCI_DMA_TODEVICE); buffer->unmap_len = 0; } + buffer->len = 0; + buffer->continuation = true; } } diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 01e99f22210..2834a01bae2 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -849,13 +849,13 @@ static void tun_sock_write_space(struct sock *sk) if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) wake_up_interruptible_sync(sk->sk_sleep); - tun = container_of(sk, struct tun_sock, sk)->tun; + tun = tun_sk(sk)->tun; kill_fasync(&tun->fasync, SIGIO, POLL_OUT); } static void tun_sock_destruct(struct sock *sk) { - free_netdev(container_of(sk, struct tun_sock, sk)->tun->dev); + free_netdev(tun_sk(sk)->tun->dev); } static struct proto tun_proto = { @@ -990,7 +990,7 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) sk->sk_write_space = tun_sock_write_space; sk->sk_sndbuf = INT_MAX; - container_of(sk, struct tun_sock, sk)->tun = tun; + tun_sk(sk)->tun = tun; security_tun_dev_post_create(sk); diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index afaf088b72e..41ad2f3697c 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1563,7 +1563,10 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode) static void ugeth_quiesce(struct ucc_geth_private *ugeth) { - /* Wait for and prevent any further xmits. */ + /* Prevent any further xmits, plus detach the device. */ + netif_device_detach(ugeth->ndev); + + /* Wait for any current xmits to finish. */ netif_tx_disable(ugeth->ndev); /* Disable the interrupt to avoid NAPI rescheduling. */ @@ -1577,7 +1580,7 @@ static void ugeth_activate(struct ucc_geth_private *ugeth) { napi_enable(&ugeth->napi); enable_irq(ugeth->ug_info->uf_info.irq); - netif_tx_wake_all_queues(ugeth->ndev); + netif_device_attach(ugeth->ndev); } /* Called every time the controller might need to be made @@ -1648,25 +1651,28 @@ static void adjust_link(struct net_device *dev) ugeth->oldspeed = phydev->speed; } - /* - * To change the MAC configuration we need to disable the - * controller. To do so, we have to either grab ugeth->lock, - * which is a bad idea since 'graceful stop' commands might - * take quite a while, or we can quiesce driver's activity. - */ - ugeth_quiesce(ugeth); - ugeth_disable(ugeth, COMM_DIR_RX_AND_TX); - - out_be32(&ug_regs->maccfg2, tempval); - out_be32(&uf_regs->upsmr, upsmr); - - ugeth_enable(ugeth, COMM_DIR_RX_AND_TX); - ugeth_activate(ugeth); - if (!ugeth->oldlink) { new_state = 1; ugeth->oldlink = 1; } + + if (new_state) { + /* + * To change the MAC configuration we need to disable + * the controller. To do so, we have to either grab + * ugeth->lock, which is a bad idea since 'graceful + * stop' commands might take quite a while, or we can + * quiesce driver's activity. + */ + ugeth_quiesce(ugeth); + ugeth_disable(ugeth, COMM_DIR_RX_AND_TX); + + out_be32(&ug_regs->maccfg2, tempval); + out_be32(&uf_regs->upsmr, upsmr); + + ugeth_enable(ugeth, COMM_DIR_RX_AND_TX); + ugeth_activate(ugeth); + } } else if (ugeth->oldlink) { new_state = 1; ugeth->oldlink = 0; @@ -3273,7 +3279,7 @@ static int ucc_geth_tx(struct net_device *dev, u8 txQ) /* Handle the transmitted buffer and release */ /* the BD to be used with the current frame */ - if ((bd == ugeth->txBd[txQ]) && (netif_queue_stopped(dev) == 0)) + if (bd == ugeth->txBd[txQ]) /* queue empty? */ break; dev->stats.tx_packets++; diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 593e01f64e9..611b8043595 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -102,6 +102,7 @@ static const int multicast_filter_limit = 32; #include <linux/ethtool.h> #include <linux/crc32.h> #include <linux/bitops.h> +#include <linux/workqueue.h> #include <asm/processor.h> /* Processor type for cache alignment. */ #include <asm/io.h> #include <asm/irq.h> @@ -389,6 +390,7 @@ struct rhine_private { struct net_device *dev; struct napi_struct napi; spinlock_t lock; + struct work_struct reset_task; /* Frequently used values: keep some adjacent for cache effect. */ u32 quirks; @@ -407,6 +409,7 @@ struct rhine_private { static int mdio_read(struct net_device *dev, int phy_id, int location); static void mdio_write(struct net_device *dev, int phy_id, int location, int value); static int rhine_open(struct net_device *dev); +static void rhine_reset_task(struct work_struct *work); static void rhine_tx_timeout(struct net_device *dev); static netdev_tx_t rhine_start_tx(struct sk_buff *skb, struct net_device *dev); @@ -775,6 +778,8 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, dev->irq = pdev->irq; spin_lock_init(&rp->lock); + INIT_WORK(&rp->reset_task, rhine_reset_task); + rp->mii_if.dev = dev; rp->mii_if.mdio_read = mdio_read; rp->mii_if.mdio_write = mdio_write; @@ -1179,22 +1184,18 @@ static int rhine_open(struct net_device *dev) return 0; } -static void rhine_tx_timeout(struct net_device *dev) +static void rhine_reset_task(struct work_struct *work) { - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - - printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status " - "%4.4x, resetting...\n", - dev->name, ioread16(ioaddr + IntrStatus), - mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); + struct rhine_private *rp = container_of(work, struct rhine_private, + reset_task); + struct net_device *dev = rp->dev; /* protect against concurrent rx interrupts */ disable_irq(rp->pdev->irq); napi_disable(&rp->napi); - spin_lock(&rp->lock); + spin_lock_bh(&rp->lock); /* clear all descriptors */ free_tbufs(dev); @@ -1206,7 +1207,7 @@ static void rhine_tx_timeout(struct net_device *dev) rhine_chip_reset(dev); init_registers(dev); - spin_unlock(&rp->lock); + spin_unlock_bh(&rp->lock); enable_irq(rp->pdev->irq); dev->trans_start = jiffies; @@ -1214,6 +1215,19 @@ static void rhine_tx_timeout(struct net_device *dev) netif_wake_queue(dev); } +static void rhine_tx_timeout(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + + printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status " + "%4.4x, resetting...\n", + dev->name, ioread16(ioaddr + IntrStatus), + mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); + + schedule_work(&rp->reset_task); +} + static netdev_tx_t rhine_start_tx(struct sk_buff *skb, struct net_device *dev) { @@ -1830,10 +1844,11 @@ static int rhine_close(struct net_device *dev) struct rhine_private *rp = netdev_priv(dev); void __iomem *ioaddr = rp->base; - spin_lock_irq(&rp->lock); - - netif_stop_queue(dev); napi_disable(&rp->napi); + cancel_work_sync(&rp->reset_task); + netif_stop_queue(dev); + + spin_lock_irq(&rp->lock); if (debug > 1) printk(KERN_DEBUG "%s: Shutting down ethercard, " diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c index f1c4b2a1e86..0fdfd58a35a 100644 --- a/drivers/net/vxge/vxge-main.c +++ b/drivers/net/vxge/vxge-main.c @@ -4087,21 +4087,21 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre) goto _exit0; } - if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) { + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { vxge_debug_ll_config(VXGE_TRACE, "%s : using 64bit DMA", __func__); high_dma = 1; if (pci_set_consistent_dma_mask(pdev, - 0xffffffffffffffffULL)) { + DMA_BIT_MASK(64))) { vxge_debug_init(VXGE_ERR, "%s : unable to obtain 64bit DMA for " "consistent allocations", __func__); ret = -ENOMEM; goto _exit1; } - } else if (!pci_set_dma_mask(pdev, 0xffffffffUL)) { + } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { vxge_debug_ll_config(VXGE_TRACE, "%s : using 32bit DMA", __func__); } else { diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index a4c086f069b..e63b7c40d0e 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1903,17 +1903,6 @@ accept: rxs->noise = sc->ah->ah_noise_floor; rxs->signal = rxs->noise + rs.rs_rssi; - /* An rssi of 35 indicates you should be able use - * 54 Mbps reliably. A more elaborate scheme can be used - * here but it requires a map of SNR/throughput for each - * possible mode used */ - rxs->qual = rs.rs_rssi * 100 / 35; - - /* rssi can be more than 35 though, anything above that - * should be considered at 100% */ - if (rxs->qual > 100) - rxs->qual = 100; - rxs->antenna = rs.rs_antenna; rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate); rxs->flag |= ath5k_rx_decrypted(sc, ds, skb, &rs); @@ -2381,6 +2370,9 @@ ath5k_init(struct ath5k_softc *sc) */ ath5k_stop_locked(sc); + /* Set PHY calibration interval */ + ah->ah_cal_intval = ath5k_calinterval; + /* * The basic interface to setting the hardware in a good * state is ``reset''. On return the hardware is known to @@ -2408,10 +2400,6 @@ ath5k_init(struct ath5k_softc *sc) /* Set ack to be sent at low bit-rates */ ath5k_hw_set_ack_bitrate_high(ah, false); - - /* Set PHY calibration inteval */ - ah->ah_cal_intval = ath5k_calinterval; - ret = 0; done: mmiowb(); diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 71b84d91dcf..efc420cd42b 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -186,7 +186,7 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q) wait = wait_time; while (ath9k_hw_numtxpending(ah, q)) { if ((--wait) == 0) { - ath_print(common, ATH_DBG_QUEUE, + ath_print(common, ATH_DBG_FATAL, "Failed to stop TX DMA in 100 " "msec after killing last frame\n"); break; diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h index 0c87771383f..e185479e295 100644 --- a/drivers/net/wireless/ath/ath9k/mac.h +++ b/drivers/net/wireless/ath/ath9k/mac.h @@ -77,6 +77,9 @@ #define ATH9K_TXERR_XTXOP 0x08 #define ATH9K_TXERR_TIMER_EXPIRED 0x10 #define ATH9K_TX_ACKED 0x20 +#define ATH9K_TXERR_MASK \ + (ATH9K_TXERR_XRETRY | ATH9K_TXERR_FILT | ATH9K_TXERR_FIFO | \ + ATH9K_TXERR_XTXOP | ATH9K_TXERR_TIMER_EXPIRED) #define ATH9K_TX_BA 0x01 #define ATH9K_TX_PWRMGMT 0x02 diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c4874345251..996eb90263c 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1973,6 +1973,9 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) struct ieee80211_hw *hw = sc->hw; int r; + /* Stop ANI */ + del_timer_sync(&common->ani.timer); + ath9k_hw_set_interrupts(ah, 0); ath_drain_all_txq(sc, retry_tx); ath_stoprecv(sc); @@ -2014,6 +2017,9 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) } } + /* Start ANI */ + ath_start_ani(common); + return r; } @@ -2508,6 +2514,9 @@ static void ath9k_stop(struct ieee80211_hw *hw) return; /* another wiphy still in use */ } + /* Ensure HW is awake when we try to shut it down. */ + ath9k_ps_wakeup(sc); + if (ah->btcoex_hw.enabled) { ath9k_hw_btcoex_disable(ah); if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE) @@ -2528,6 +2537,9 @@ static void ath9k_stop(struct ieee80211_hw *hw) /* disable HAL and put h/w to sleep */ ath9k_hw_disable(ah); ath9k_hw_configpcipowersave(ah, 1, 1); + ath9k_ps_restore(sc); + + /* Finally, put the chip in FULL SLEEP mode */ ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP); sc->sc_flags |= SC_OP_INVALID; @@ -2641,8 +2653,10 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) || (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) || (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) { + ath9k_ps_wakeup(sc); ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); ath_beacon_return(sc, avp); + ath9k_ps_restore(sc); } sc->sc_flags &= ~SC_OP_BEACONS; @@ -3091,15 +3105,21 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, case IEEE80211_AMPDU_RX_STOP: break; case IEEE80211_AMPDU_TX_START: + ath9k_ps_wakeup(sc); ath_tx_aggr_start(sc, sta, tid, ssn); ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); + ath9k_ps_restore(sc); break; case IEEE80211_AMPDU_TX_STOP: + ath9k_ps_wakeup(sc); ath_tx_aggr_stop(sc, sta, tid); ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + ath9k_ps_restore(sc); break; case IEEE80211_AMPDU_TX_OPERATIONAL: + ath9k_ps_wakeup(sc); ath_tx_aggr_resume(sc, sta, tid); + ath9k_ps_restore(sc); break; default: ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL, diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 5321f735e5a..f7af5ea5475 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -96,7 +96,7 @@ static void ath_pci_bt_coex_prep(struct ath_common *common) pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm); } -const static struct ath_bus_ops ath_pci_bus_ops = { +static const struct ath_bus_ops ath_pci_bus_ops = { .read_cachesize = ath_pci_read_cachesize, .cleanup = ath_pci_cleanup, .eeprom_read = ath_pci_eeprom_read, diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 2a11cc57cee..fa12b9060b0 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1108,11 +1108,11 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) if (npend) { int r; - ath_print(common, ATH_DBG_XMIT, + ath_print(common, ATH_DBG_FATAL, "Unable to stop TxDMA. Reset HAL!\n"); spin_lock_bh(&sc->sc_resetlock); - r = ath9k_hw_reset(ah, sc->sc_ah->curchan, true); + r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false); if (r) ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d\n", @@ -1414,17 +1414,9 @@ static void assign_aggr_tid_seqno(struct sk_buff *skb, * For HT capable stations, we save tidno for later use. * We also override seqno set by upper layer with the one * in tx aggregation state. - * - * If fragmentation is on, the sequence number is - * not overridden, since it has been - * incremented by the fragmentation routine. - * - * FIXME: check if the fragmentation threshold exceeds - * IEEE80211 max. */ tid = ATH_AN_2_TID(an, bf->bf_tidno); - hdr->seq_ctrl = cpu_to_le16(tid->seq_next << - IEEE80211_SEQ_SEQ_SHIFT); + hdr->seq_ctrl = cpu_to_le16(tid->seq_next << IEEE80211_SEQ_SEQ_SHIFT); bf->bf_seqno = tid->seq_next; INCR(tid->seq_next, IEEE80211_SEQ_MAX); } @@ -1636,7 +1628,8 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf, bf->bf_keyix = ATH9K_TXKEYIX_INVALID; } - if (ieee80211_is_data_qos(fc) && (sc->sc_flags & SC_OP_TXAGGR)) + if (ieee80211_is_data_qos(fc) && bf_isht(bf) && + (sc->sc_flags & SC_OP_TXAGGR)) assign_aggr_tid_seqno(skb, bf); bf->bf_mpdu = skb; @@ -1780,7 +1773,8 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb) struct ath_wiphy *aphy = hw->priv; struct ath_softc *sc = aphy->sc; struct ath_common *common = ath9k_hw_common(sc->sc_ah); - int hdrlen, padsize; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + int padpos, padsize; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ath_tx_control txctl; @@ -1792,7 +1786,6 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb) * BSSes. */ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) sc->tx.seq_no += 0x10; hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); @@ -1800,9 +1793,9 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb) } /* Add the padding after the header if this is not already done */ - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - if (hdrlen & 3) { - padsize = hdrlen % 4; + padpos = ath9k_cmn_padpos(hdr->frame_control); + padsize = padpos & 3; + if (padsize && skb->len>padpos) { if (skb_headroom(skb) < padsize) { ath_print(common, ATH_DBG_XMIT, "TX CABQ padding failed\n"); @@ -1810,7 +1803,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb) return; } skb_push(skb, padsize); - memmove(skb->data, skb->data + padsize, hdrlen); + memmove(skb->data, skb->data + padsize, padpos); } txctl.txq = sc->beacon.cabq; @@ -1838,7 +1831,8 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, struct ieee80211_hw *hw = sc->hw; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ath_common *common = ath9k_hw_common(sc->sc_ah); - int hdrlen, padsize; + struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data; + int padpos, padsize; ath_print(common, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb); @@ -1853,14 +1847,14 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, tx_info->flags |= IEEE80211_TX_STAT_ACK; } - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - padsize = hdrlen & 3; - if (padsize && hdrlen >= 24) { + padpos = ath9k_cmn_padpos(hdr->frame_control); + padsize = padpos & 3; + if (padsize && skb->len>padpos+padsize) { /* * Remove MAC header padding before giving the frame back to * mac80211. */ - memmove(skb->data + padsize, skb->data, hdrlen); + memmove(skb->data + padsize, skb->data, padpos); skb_pull(skb, padsize); } @@ -2078,7 +2072,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) &txq->axq_q, lastbf->list.prev); txq->axq_depth--; - txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_FILT); + txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_MASK); txq->axq_tx_inprogress = false; spin_unlock_bh(&txq->axq_lock); diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 027be275e03..88d1fd02d40 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -383,160 +383,44 @@ static inline } } -/* Check if a DMA region fits the device constraints. - * Returns true, if the region is OK for usage with this device. */ -static inline bool b43_dma_address_ok(struct b43_dmaring *ring, - dma_addr_t addr, size_t size) -{ - switch (ring->type) { - case B43_DMA_30BIT: - if ((u64)addr + size > (1ULL << 30)) - return 0; - break; - case B43_DMA_32BIT: - if ((u64)addr + size > (1ULL << 32)) - return 0; - break; - case B43_DMA_64BIT: - /* Currently we can't have addresses beyond - * 64bit in the kernel. */ - break; - } - return 1; -} - -#define is_4k_aligned(addr) (((u64)(addr) & 0x0FFFull) == 0) -#define is_8k_aligned(addr) (((u64)(addr) & 0x1FFFull) == 0) - -static void b43_unmap_and_free_ringmem(struct b43_dmaring *ring, void *base, - dma_addr_t dmaaddr, size_t size) -{ - ssb_dma_unmap_single(ring->dev->dev, dmaaddr, size, DMA_TO_DEVICE); - free_pages((unsigned long)base, get_order(size)); -} - -static void * __b43_get_and_map_ringmem(struct b43_dmaring *ring, - dma_addr_t *dmaaddr, size_t size, - gfp_t gfp_flags) -{ - void *base; - - base = (void *)__get_free_pages(gfp_flags, get_order(size)); - if (!base) - return NULL; - memset(base, 0, size); - *dmaaddr = ssb_dma_map_single(ring->dev->dev, base, size, - DMA_TO_DEVICE); - if (ssb_dma_mapping_error(ring->dev->dev, *dmaaddr)) { - free_pages((unsigned long)base, get_order(size)); - return NULL; - } - - return base; -} - -static void * b43_get_and_map_ringmem(struct b43_dmaring *ring, - dma_addr_t *dmaaddr, size_t size) -{ - void *base; - - base = __b43_get_and_map_ringmem(ring, dmaaddr, size, - GFP_KERNEL); - if (!base) { - b43err(ring->dev->wl, "Failed to allocate or map pages " - "for DMA ringmemory\n"); - return NULL; - } - if (!b43_dma_address_ok(ring, *dmaaddr, size)) { - /* The memory does not fit our device constraints. - * Retry with GFP_DMA set to get lower memory. */ - b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size); - base = __b43_get_and_map_ringmem(ring, dmaaddr, size, - GFP_KERNEL | GFP_DMA); - if (!base) { - b43err(ring->dev->wl, "Failed to allocate or map pages " - "in the GFP_DMA region for DMA ringmemory\n"); - return NULL; - } - if (!b43_dma_address_ok(ring, *dmaaddr, size)) { - b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size); - b43err(ring->dev->wl, "Failed to allocate DMA " - "ringmemory that fits device constraints\n"); - return NULL; - } - } - /* We expect the memory to be 4k aligned, at least. */ - if (B43_WARN_ON(!is_4k_aligned(*dmaaddr))) { - b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size); - return NULL; - } - - return base; -} - static int alloc_ringmemory(struct b43_dmaring *ring) { - unsigned int required; - void *base; - dma_addr_t dmaaddr; - - /* There are several requirements to the descriptor ring memory: - * - The memory region needs to fit the address constraints for the - * device (same as for frame buffers). - * - For 30/32bit DMA devices, the descriptor ring must be 4k aligned. - * - For 64bit DMA devices, the descriptor ring must be 8k aligned. + gfp_t flags = GFP_KERNEL; + + /* The specs call for 4K buffers for 30- and 32-bit DMA with 4K + * alignment and 8K buffers for 64-bit DMA with 8K alignment. Testing + * has shown that 4K is sufficient for the latter as long as the buffer + * does not cross an 8K boundary. + * + * For unknown reasons - possibly a hardware error - the BCM4311 rev + * 02, which uses 64-bit DMA, needs the ring buffer in very low memory, + * which accounts for the GFP_DMA flag below. + * + * The flags here must match the flags in free_ringmemory below! */ - if (ring->type == B43_DMA_64BIT) - required = ring->nr_slots * sizeof(struct b43_dmadesc64); - else - required = ring->nr_slots * sizeof(struct b43_dmadesc32); - if (B43_WARN_ON(required > 0x1000)) + flags |= GFP_DMA; + ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev, + B43_DMA_RINGMEMSIZE, + &(ring->dmabase), flags); + if (!ring->descbase) { + b43err(ring->dev->wl, "DMA ringmemory allocation failed\n"); return -ENOMEM; - - ring->alloc_descsize = 0x1000; - base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize); - if (!base) - return -ENOMEM; - ring->alloc_descbase = base; - ring->alloc_dmabase = dmaaddr; - - if ((ring->type != B43_DMA_64BIT) || is_8k_aligned(dmaaddr)) { - /* We're on <=32bit DMA, or we already got 8k aligned memory. - * That's all we need, so we're fine. */ - ring->descbase = base; - ring->dmabase = dmaaddr; - return 0; - } - b43_unmap_and_free_ringmem(ring, base, dmaaddr, ring->alloc_descsize); - - /* Ok, we failed at the 8k alignment requirement. - * Try to force-align the memory region now. */ - ring->alloc_descsize = 0x2000; - base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize); - if (!base) - return -ENOMEM; - ring->alloc_descbase = base; - ring->alloc_dmabase = dmaaddr; - - if (is_8k_aligned(dmaaddr)) { - /* We're already 8k aligned. That Ok, too. */ - ring->descbase = base; - ring->dmabase = dmaaddr; - return 0; } - /* Force-align it to 8k */ - ring->descbase = (void *)((u8 *)base + 0x1000); - ring->dmabase = dmaaddr + 0x1000; - B43_WARN_ON(!is_8k_aligned(ring->dmabase)); + memset(ring->descbase, 0, B43_DMA_RINGMEMSIZE); return 0; } static void free_ringmemory(struct b43_dmaring *ring) { - b43_unmap_and_free_ringmem(ring, ring->alloc_descbase, - ring->alloc_dmabase, ring->alloc_descsize); + gfp_t flags = GFP_KERNEL; + + if (ring->type == B43_DMA_64BIT) + flags |= GFP_DMA; + + ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE, + ring->descbase, ring->dmabase, flags); } /* Reset the RX DMA channel */ @@ -646,14 +530,29 @@ static bool b43_dma_mapping_error(struct b43_dmaring *ring, if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr))) return 1; - if (!b43_dma_address_ok(ring, addr, buffersize)) { - /* We can't support this address. Unmap it again. */ - unmap_descbuffer(ring, addr, buffersize, dma_to_device); - return 1; + switch (ring->type) { + case B43_DMA_30BIT: + if ((u64)addr + buffersize > (1ULL << 30)) + goto address_error; + break; + case B43_DMA_32BIT: + if ((u64)addr + buffersize > (1ULL << 32)) + goto address_error; + break; + case B43_DMA_64BIT: + /* Currently we can't have addresses beyond + * 64bit in the kernel. */ + break; } /* The address is OK. */ return 0; + +address_error: + /* We can't support this address. Unmap it again. */ + unmap_descbuffer(ring, addr, buffersize, dma_to_device); + + return 1; } static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb) @@ -715,9 +614,6 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring, meta->dmaaddr = dmaaddr; ring->ops->fill_descriptor(ring, desc, dmaaddr, ring->rx_buffersize, 0, 0, 0); - ssb_dma_sync_single_for_device(ring->dev->dev, - ring->alloc_dmabase, - ring->alloc_descsize, DMA_TO_DEVICE); return 0; } @@ -1354,9 +1250,6 @@ static int dma_tx_fragment(struct b43_dmaring *ring, } /* Now transfer the whole frame. */ wmb(); - ssb_dma_sync_single_for_device(ring->dev->dev, - ring->alloc_dmabase, - ring->alloc_descsize, DMA_TO_DEVICE); ops->poke_tx(ring, next_slot(ring, slot)); return 0; diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h index e607b392314..f7ab37c4cdb 100644 --- a/drivers/net/wireless/b43/dma.h +++ b/drivers/net/wireless/b43/dma.h @@ -157,6 +157,7 @@ struct b43_dmadesc_generic { } __attribute__ ((__packed__)); /* Misc DMA constants */ +#define B43_DMA_RINGMEMSIZE PAGE_SIZE #define B43_DMA0_RX_FRAMEOFFSET 30 /* DMA engine tuning knobs */ @@ -246,12 +247,6 @@ struct b43_dmaring { /* The QOS priority assigned to this ring. Only used for TX rings. * This is the mac80211 "queue" value. */ u8 queue_prio; - /* Pointers and size of the originally allocated and mapped memory - * region for the descriptor ring. */ - void *alloc_descbase; - dma_addr_t alloc_dmabase; - unsigned int alloc_descsize; - /* Pointer to our wireless device. */ struct b43_wldev *dev; #ifdef CONFIG_B43_DEBUG /* Maximum number of used slots. */ diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 7da1dab933d..234891d8cc1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -681,19 +681,13 @@ static void iwl3945_rx_reply_rx(struct iwl_priv *priv, snr = rx_stats_sig_avg / rx_stats_noise_diff; rx_status.noise = rx_status.signal - iwl3945_calc_db_from_ratio(snr); - rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, - rx_status.noise); - - /* If noise info not available, calculate signal quality indicator (%) - * using just the dBm signal level. */ } else { rx_status.noise = priv->last_rx_noise; - rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0); } - IWL_DEBUG_STATS(priv, "Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n", - rx_status.signal, rx_status.noise, rx_status.qual, + IWL_DEBUG_STATS(priv, "Rssi %d noise %d sig_avg %d noise_diff %d\n", + rx_status.signal, rx_status.noise, rx_stats_sig_avg, rx_stats_noise_diff); header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); @@ -1835,8 +1829,7 @@ static int iwl3945_send_rxon_assoc(struct iwl_priv *priv) rc = -EIO; } - priv->alloc_rxb_page--; - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return rc; } @@ -2836,6 +2829,7 @@ static struct iwl_cfg iwl3945_bg_cfg = { .use_isr_legacy = true, .ht_greenfield_support = false, .led_compensation = 64, + .broken_powersave = true, }; static struct iwl_cfg iwl3945_abg_cfg = { @@ -2852,6 +2846,7 @@ static struct iwl_cfg iwl3945_abg_cfg = { .use_isr_legacy = true, .ht_greenfield_support = false, .led_compensation = 64, + .broken_powersave = true, }; struct pci_device_id iwl3945_hw_card_ids[] = { diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index ecc23ec1f6a..531fa125f5a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -222,7 +222,6 @@ struct iwl3945_ibss_seq { * *****************************************************************************/ extern int iwl3945_calc_db_from_ratio(int sig_ratio); -extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm); extern void iwl3945_rx_replenish(void *data); extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq); extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv, diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 386513b601f..484c5fdf7c2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1204,7 +1204,7 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info); /* calculate tx gain adjustment based on power supply voltage */ - voltage = priv->calib_info->voltage; + voltage = le16_to_cpu(priv->calib_info->voltage); init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage); voltage_compensation = iwl4965_get_voltage_compensation(voltage, init_voltage); diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h index 4ef6804a455..bc056e9ab85 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h @@ -92,11 +92,15 @@ static inline s32 iwl_temp_calib_to_offset(struct iwl_priv *priv) { - u16 *temp_calib = (u16 *)iwl_eeprom_query_addr(priv, - EEPROM_5000_TEMPERATURE); - /* offset = temperature - voltage / coef */ - s32 offset = (s32)(temp_calib[0] - temp_calib[1] / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF); - return offset; + u16 temperature, voltage; + __le16 *temp_calib = + (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_TEMPERATURE); + + temperature = le16_to_cpu(temp_calib[0]); + voltage = le16_to_cpu(temp_calib[1]); + + /* offset = temp - volt / coeff */ + return (s32)(temperature - voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF); } /* Fixed (non-configurable) rx data from phy */ diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index e2f8615c8c9..33a5866538e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -333,14 +333,15 @@ static void iwl5000_set_ct_threshold(struct iwl_priv *priv) static int iwl5000_set_Xtal_calib(struct iwl_priv *priv) { struct iwl_calib_xtal_freq_cmd cmd; - u16 *xtal_calib = (u16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL); + __le16 *xtal_calib = + (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL); cmd.hdr.op_code = IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD; cmd.hdr.first_group = 0; cmd.hdr.groups_num = 1; cmd.hdr.data_valid = 1; - cmd.cap_pin1 = (u8)xtal_calib[0]; - cmd.cap_pin2 = (u8)xtal_calib[1]; + cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]); + cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]); return iwl_calib_set(&priv->calib_results[IWL_CALIB_XTAL], (u8 *)&cmd, sizeof(cmd)); } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index fe511cbf012..b93e4915819 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -150,7 +150,7 @@ static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = { }; /* mbps, mcs */ -const static struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { +static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { { "1", "BPSK DSSS"}, { "2", "QPSK DSSS"}, {"5.5", "BPSK CCK"}, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index b8377efb3ba..1c9866daf81 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1842,7 +1842,7 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log) } #ifdef CONFIG_IWLWIFI_DEBUG - if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS)) + if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log) size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES) ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size; #else @@ -3173,7 +3173,6 @@ static int iwl_init_drv(struct iwl_priv *priv) priv->ibss_beacon = NULL; - spin_lock_init(&priv->lock); spin_lock_init(&priv->sta_lock); spin_lock_init(&priv->hcmd_lock); @@ -3361,10 +3360,11 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) (unsigned long long) pci_resource_len(pdev, 0)); IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base); - /* this spin lock will be used in apm_ops.init and EEPROM access + /* these spin locks will be used in apm_ops.init and EEPROM access * we should init now */ spin_lock_init(&priv->reg_lock); + spin_lock_init(&priv->lock); iwl_hw_detect(priv); IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s REV=0x%X\n", priv->cfg->name, priv->hw_rev); diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index a7bfae01f19..1ec8cb4d5ea 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -77,8 +77,7 @@ * The MAC (uCode processor, etc.) does not need to be powered up for accessing * the CSR registers. * - * NOTE: Newer devices using one-time-programmable (OTP) memory - * require device to be awake in order to read this memory + * NOTE: Device does need to be awake in order to read this memory * via CSR_EEPROM and CSR_OTP registers */ #define CSR_BASE (0x000) @@ -111,9 +110,8 @@ /* * EEPROM and OTP (one-time-programmable) memory reads * - * NOTE: For (newer) devices using OTP, device must be awake, initialized via - * apm_ops.init() in order to read. Older devices (3945/4965/5000) - * use EEPROM and do not require this. + * NOTE: Device must be awake, initialized via apm_ops.init(), + * in order to read. */ #define CSR_EEPROM_REG (CSR_BASE+0x02c) #define CSR_EEPROM_GP (CSR_BASE+0x030) diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 2673e9a4db9..165d1f6e2dd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -1168,7 +1168,7 @@ struct iwl_priv { u32 last_beacon_time; u64 last_tsf; - /* eeprom */ + /* eeprom -- this is in the card's little endian byte order */ u8 *eeprom; int nvm_device_type; struct iwl_eeprom_calib_info *calib_info; @@ -1353,4 +1353,15 @@ static inline int is_channel_ibss(const struct iwl_channel_info *ch) return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0; } +static inline void __iwl_free_pages(struct iwl_priv *priv, struct page *page) +{ + __free_pages(page, priv->hw_params.rx_page_order); + priv->alloc_rxb_page--; +} + +static inline void iwl_free_pages(struct iwl_priv *priv, unsigned long page) +{ + free_pages(page, priv->hw_params.rx_page_order); + priv->alloc_rxb_page--; +} #endif /* __iwl_dev_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 3946e5c03f8..4a30969689f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -370,7 +370,7 @@ static int iwl_init_otp_access(struct iwl_priv *priv) return ret; } -static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data) +static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, __le16 *eeprom_data) { int ret = 0; u32 r; @@ -404,7 +404,7 @@ static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data) CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK); IWL_ERR(priv, "Correctable OTP ECC error, continue read\n"); } - *eeprom_data = le16_to_cpu((__force __le16)(r >> 16)); + *eeprom_data = cpu_to_le16(r >> 16); return 0; } @@ -413,7 +413,8 @@ static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data) */ static bool iwl_is_otp_empty(struct iwl_priv *priv) { - u16 next_link_addr = 0, link_value; + u16 next_link_addr = 0; + __le16 link_value; bool is_empty = false; /* locate the beginning of OTP link list */ @@ -443,7 +444,8 @@ static bool iwl_is_otp_empty(struct iwl_priv *priv) static int iwl_find_otp_image(struct iwl_priv *priv, u16 *validblockaddr) { - u16 next_link_addr = 0, link_value = 0, valid_addr; + u16 next_link_addr = 0, valid_addr; + __le16 link_value = 0; int usedblocks = 0; /* set addressing mode to absolute to traverse the link list */ @@ -463,7 +465,7 @@ static int iwl_find_otp_image(struct iwl_priv *priv, * check for more block on the link list */ valid_addr = next_link_addr; - next_link_addr = link_value * sizeof(u16); + next_link_addr = le16_to_cpu(link_value) * sizeof(u16); IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n", usedblocks, next_link_addr); if (iwl_read_otp_word(priv, next_link_addr, &link_value)) @@ -497,7 +499,7 @@ static int iwl_find_otp_image(struct iwl_priv *priv, */ int iwl_eeprom_init(struct iwl_priv *priv) { - u16 *e; + __le16 *e; u32 gp = iwl_read32(priv, CSR_EEPROM_GP); int sz; int ret; @@ -516,12 +518,9 @@ int iwl_eeprom_init(struct iwl_priv *priv) ret = -ENOMEM; goto alloc_err; } - e = (u16 *)priv->eeprom; + e = (__le16 *)priv->eeprom; - if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) { - /* OTP reads require powered-up chip */ - priv->cfg->ops->lib->apm_ops.init(priv); - } + priv->cfg->ops->lib->apm_ops.init(priv); ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv); if (ret < 0) { @@ -562,7 +561,7 @@ int iwl_eeprom_init(struct iwl_priv *priv) } for (addr = validblockaddr; addr < validblockaddr + sz; addr += sizeof(u16)) { - u16 eeprom_data; + __le16 eeprom_data; ret = iwl_read_otp_word(priv, addr, &eeprom_data); if (ret) @@ -570,13 +569,6 @@ int iwl_eeprom_init(struct iwl_priv *priv) e[cache_addr / 2] = eeprom_data; cache_addr += sizeof(u16); } - - /* - * Now that OTP reads are complete, reset chip to save - * power until we load uCode during "up". - */ - priv->cfg->ops->lib->apm_ops.stop(priv); - } else { /* eeprom is an array of 16bit values */ for (addr = 0; addr < sz; addr += sizeof(u16)) { @@ -594,7 +586,7 @@ int iwl_eeprom_init(struct iwl_priv *priv) goto done; } r = _iwl_read_direct32(priv, CSR_EEPROM_REG); - e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16)); + e[addr / 2] = cpu_to_le16(r >> 16); } } ret = 0; @@ -603,6 +595,8 @@ done: err: if (ret) iwl_eeprom_free(priv); + /* Reset chip to save power until we load uCode during "up". */ + priv->cfg->ops->lib->apm_ops.stop(priv); alloc_err: return ret; } @@ -755,7 +749,8 @@ static int iwl_mod_ht40_chan_info(struct iwl_priv *priv, ch_info->ht40_eeprom = *eeprom_ch; ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg; ch_info->ht40_flags = eeprom_ch->flags; - ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel; + if (eeprom_ch->flags & EEPROM_CHANNEL_VALID) + ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel; return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index 5cd2b66bbe4..0cd9c02ee04 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -137,7 +137,7 @@ struct iwl_eeprom_channel { * */ struct iwl_eeprom_enhanced_txpwr { - u16 common; + __le16 common; s8 chain_a_max; s8 chain_b_max; s8 chain_c_max; @@ -360,7 +360,7 @@ struct iwl_eeprom_calib_subband_info { struct iwl_eeprom_calib_info { u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */ u8 saturation_power52; /* half-dBm */ - s16 voltage; /* signed */ + __le16 voltage; /* signed */ struct iwl_eeprom_calib_subband_info band_info[EEPROM_TX_POWER_BANDS]; } __attribute__ ((packed)); diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index a2316594820..30e9ea6d54e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -234,7 +234,7 @@ cancel: } fail: if (cmd->reply_page) { - free_pages(cmd->reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd->reply_page); cmd->reply_page = 0; } out: diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 6090bc15a6d..6f36b6e79f5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -345,10 +345,8 @@ void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, PAGE_SIZE << priv->hw_params.rx_page_order, PCI_DMA_FROMDEVICE); - __free_pages(rxq->pool[i].page, - priv->hw_params.rx_page_order); + __iwl_free_pages(priv, rxq->pool[i].page); rxq->pool[i].page = NULL; - priv->alloc_rxb_page--; } } @@ -416,9 +414,7 @@ void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, PAGE_SIZE << priv->hw_params.rx_page_order, PCI_DMA_FROMDEVICE); - priv->alloc_rxb_page--; - __free_pages(rxq->pool[i].page, - priv->hw_params.rx_page_order); + __iwl_free_pages(priv, rxq->pool[i].page); rxq->pool[i].page = NULL; } list_add_tail(&rxq->pool[i].list, &rxq->rx_used); @@ -654,47 +650,6 @@ void iwl_reply_statistics(struct iwl_priv *priv, } EXPORT_SYMBOL(iwl_reply_statistics); -#define PERFECT_RSSI (-20) /* dBm */ -#define WORST_RSSI (-95) /* dBm */ -#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI) - -/* Calculate an indication of rx signal quality (a percentage, not dBm!). - * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info - * about formulas used below. */ -static int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm) -{ - int sig_qual; - int degradation = PERFECT_RSSI - rssi_dbm; - - /* If we get a noise measurement, use signal-to-noise ratio (SNR) - * as indicator; formula is (signal dbm - noise dbm). - * SNR at or above 40 is a great signal (100%). - * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator. - * Weakest usable signal is usually 10 - 15 dB SNR. */ - if (noise_dbm) { - if (rssi_dbm - noise_dbm >= 40) - return 100; - else if (rssi_dbm < noise_dbm) - return 0; - sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2; - - /* Else use just the signal level. - * This formula is a least squares fit of data points collected and - * compared with a reference system that had a percentage (%) display - * for signal quality. */ - } else - sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation * - (15 * RSSI_RANGE + 62 * degradation)) / - (RSSI_RANGE * RSSI_RANGE); - - if (sig_qual > 100) - sig_qual = 100; - else if (sig_qual < 1) - sig_qual = 0; - - return sig_qual; -} - /* Calc max signal level (dBm) among 3 possible receivers */ static inline int iwl_calc_rssi(struct iwl_priv *priv, struct iwl_rx_phy_res *rx_resp) @@ -1105,11 +1060,8 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, if (iwl_is_associated(priv) && !test_bit(STATUS_SCANNING, &priv->status)) { rx_status.noise = priv->last_rx_noise; - rx_status.qual = iwl_calc_sig_qual(rx_status.signal, - rx_status.noise); } else { rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE; - rx_status.qual = iwl_calc_sig_qual(rx_status.signal, 0); } /* Reset beacon noise level if not associated. */ @@ -1122,8 +1074,8 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, iwl_dbg_report_frame(priv, phy_res, len, header, 1); #endif iwl_dbg_log_rx_data_frame(priv, len, header); - IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n", - rx_status.signal, rx_status.noise, rx_status.qual, + IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, TSF %llu\n", + rx_status.signal, rx_status.noise, (unsigned long long)rx_status.mactime); /* diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index a2b2b8315ff..fa1c89ba645 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -144,8 +144,7 @@ static int iwl_send_scan_abort(struct iwl_priv *priv) clear_bit(STATUS_SCAN_HW, &priv->status); } - priv->alloc_rxb_page--; - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return ret; } diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index cd6a6901216..cde09a890b7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -164,9 +164,7 @@ int iwl_send_add_sta(struct iwl_priv *priv, break; } } - - priv->alloc_rxb_page--; - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return ret; } @@ -391,9 +389,7 @@ static int iwl_send_remove_station(struct iwl_priv *priv, const u8 *addr, break; } } - - priv->alloc_rxb_page--; - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return ret; } diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 00da5e152d4..87ce2bd292c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -407,13 +407,14 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv) int txq_id; /* Tx queues */ - if (priv->txq) + if (priv->txq) { for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) if (txq_id == IWL_CMD_QUEUE_NUM) iwl_cmd_queue_free(priv); else iwl_tx_queue_free(priv, txq_id); + } iwl_free_dma_ptr(priv, &priv->kw); iwl_free_dma_ptr(priv, &priv->scd_bc_tbls); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 2a28a1f8b1f..f8e4e4b18d0 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -548,6 +548,9 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq = &priv->txq[txq_id]; q = &txq->q; + if ((iwl_queue_space(q) < q->high_mark)) + goto drop; + spin_lock_irqsave(&priv->lock, flags); idx = get_cmd_index(q, q->write_ptr, 0); @@ -812,7 +815,7 @@ static int iwl3945_get_measurement(struct iwl_priv *priv, break; } - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return rc; } @@ -1198,9 +1201,7 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, PAGE_SIZE << priv->hw_params.rx_page_order, PCI_DMA_FROMDEVICE); - priv->alloc_rxb_page--; - __free_pages(rxq->pool[i].page, - priv->hw_params.rx_page_order); + __iwl_free_pages(priv, rxq->pool[i].page); rxq->pool[i].page = NULL; } list_add_tail(&rxq->pool[i].list, &rxq->rx_used); @@ -1247,10 +1248,8 @@ static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rx pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, PAGE_SIZE << priv->hw_params.rx_page_order, PCI_DMA_FROMDEVICE); - __free_pages(rxq->pool[i].page, - priv->hw_params.rx_page_order); + __iwl_free_pages(priv, rxq->pool[i].page); rxq->pool[i].page = NULL; - priv->alloc_rxb_page--; } } @@ -1300,47 +1299,6 @@ int iwl3945_calc_db_from_ratio(int sig_ratio) return (int)ratio2dB[sig_ratio]; } -#define PERFECT_RSSI (-20) /* dBm */ -#define WORST_RSSI (-95) /* dBm */ -#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI) - -/* Calculate an indication of rx signal quality (a percentage, not dBm!). - * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info - * about formulas used below. */ -int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm) -{ - int sig_qual; - int degradation = PERFECT_RSSI - rssi_dbm; - - /* If we get a noise measurement, use signal-to-noise ratio (SNR) - * as indicator; formula is (signal dbm - noise dbm). - * SNR at or above 40 is a great signal (100%). - * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator. - * Weakest usable signal is usually 10 - 15 dB SNR. */ - if (noise_dbm) { - if (rssi_dbm - noise_dbm >= 40) - return 100; - else if (rssi_dbm < noise_dbm) - return 0; - sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2; - - /* Else use just the signal level. - * This formula is a least squares fit of data points collected and - * compared with a reference system that had a percentage (%) display - * for signal quality. */ - } else - sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation * - (15 * RSSI_RANGE + 62 * degradation)) / - (RSSI_RANGE * RSSI_RANGE); - - if (sig_qual > 100) - sig_qual = 100; - else if (sig_qual < 1) - sig_qual = 0; - - return sig_qual; -} - /** * iwl3945_rx_handle - Main entry function for receiving responses from uCode * @@ -1688,7 +1646,7 @@ void iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log) } #ifdef CONFIG_IWLWIFI_DEBUG - if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS)) + if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log) size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES) ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size; #else @@ -3867,7 +3825,6 @@ static int iwl3945_init_drv(struct iwl_priv *priv) priv->retry_rate = 1; priv->ibss_beacon = NULL; - spin_lock_init(&priv->lock); spin_lock_init(&priv->sta_lock); spin_lock_init(&priv->hcmd_lock); @@ -3936,9 +3893,11 @@ static int iwl3945_setup_mac(struct iwl_priv *priv) /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM | - IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_SUPPORTS_DYNAMIC_PS; + IEEE80211_HW_SPECTRUM_MGMT; + + if (!priv->cfg->broken_powersave) + hw->flags |= IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_SUPPORTS_DYNAMIC_PS; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | @@ -4057,10 +4016,11 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e * PCI Tx retries from interfering with C3 CPU state */ pci_write_config_byte(pdev, 0x41, 0x00); - /* this spin lock will be used in apm_ops.init and EEPROM access + /* these spin locks will be used in apm_ops.init and EEPROM access * we should init now */ spin_lock_init(&priv->reg_lock); + spin_lock_init(&priv->lock); /*********************** * 4. Read EEPROM diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h index 5a26bb05a33..842811142be 100644 --- a/drivers/net/wireless/iwmc3200wifi/iwm.h +++ b/drivers/net/wireless/iwmc3200wifi/iwm.h @@ -268,7 +268,7 @@ struct iwm_priv { struct sk_buff_head rx_list; struct list_head rx_tickets; - struct list_head rx_packets[IWM_RX_ID_HASH]; + struct list_head rx_packets[IWM_RX_ID_HASH + 1]; struct workqueue_struct *rx_wq; struct work_struct rx_worker; @@ -349,7 +349,7 @@ int iwm_up(struct iwm_priv *iwm); int iwm_down(struct iwm_priv *iwm); /* TX API */ -u16 iwm_tid_to_queue(u16 tid); +int iwm_tid_to_queue(u16 tid); void iwm_tx_credit_inc(struct iwm_priv *iwm, int id, int total_freed_pages); void iwm_tx_worker(struct work_struct *work); int iwm_xmit_frame(struct sk_buff *skb, struct net_device *netdev); diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c index e4f0f8705f6..c4c0d23c63e 100644 --- a/drivers/net/wireless/iwmc3200wifi/netdev.c +++ b/drivers/net/wireless/iwmc3200wifi/netdev.c @@ -76,7 +76,7 @@ static int iwm_stop(struct net_device *ndev) */ static const u16 iwm_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 }; -u16 iwm_tid_to_queue(u16 tid) +int iwm_tid_to_queue(u16 tid) { if (tid > IWM_UMAC_TID_NR - 2) return -EINVAL; diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c index 1c57c1f72cb..6d6ed748517 100644 --- a/drivers/net/wireless/iwmc3200wifi/rx.c +++ b/drivers/net/wireless/iwmc3200wifi/rx.c @@ -1126,7 +1126,7 @@ static int iwm_ntf_stop_resume_tx(struct iwm_priv *iwm, u8 *buf, if (!stop) { struct iwm_tx_queue *txq; - u16 queue = iwm_tid_to_queue(bit); + int queue = iwm_tid_to_queue(bit); if (queue < 0) continue; diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c index 2f91c9b808a..92b7a357a5e 100644 --- a/drivers/net/wireless/libertas/mesh.c +++ b/drivers/net/wireless/libertas/mesh.c @@ -2,6 +2,7 @@ #include <linux/delay.h> #include <linux/etherdevice.h> #include <linux/netdevice.h> +#include <linux/if_ether.h> #include <linux/if_arp.h> #include <linux/kthread.h> #include <linux/kfifo.h> @@ -351,8 +352,7 @@ int lbs_add_mesh(struct lbs_private *priv) mesh_dev->netdev_ops = &mesh_netdev_ops; mesh_dev->ethtool_ops = &lbs_ethtool_ops; - memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, - sizeof(priv->dev->dev_addr)); + memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, ETH_ALEN); SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent); diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index c6a6c042b82..b0b1c784150 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -567,11 +567,8 @@ int lbs_scan_networks(struct lbs_private *priv, int full_scan) chan_count = lbs_scan_create_channel_list(priv, chan_list); netif_stop_queue(priv->dev); - netif_carrier_off(priv->dev); - if (priv->mesh_dev) { + if (priv->mesh_dev) netif_stop_queue(priv->mesh_dev); - netif_carrier_off(priv->mesh_dev); - } /* Prepare to continue an interrupted scan */ lbs_deb_scan("chan_count %d, scan_channel %d\n", @@ -635,16 +632,13 @@ out2: priv->scan_channel = 0; out: - if (priv->connect_status == LBS_CONNECTED) { - netif_carrier_on(priv->dev); - if (!priv->tx_pending_len) - netif_wake_queue(priv->dev); - } - if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED)) { - netif_carrier_on(priv->mesh_dev); - if (!priv->tx_pending_len) - netif_wake_queue(priv->mesh_dev); - } + if (priv->connect_status == LBS_CONNECTED && !priv->tx_pending_len) + netif_wake_queue(priv->dev); + + if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED) && + !priv->tx_pending_len) + netif_wake_queue(priv->mesh_dev); + kfree(chan_list); lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c index a8eb9e1fcf3..4b1aab593a8 100644 --- a/drivers/net/wireless/libertas/wext.c +++ b/drivers/net/wireless/libertas/wext.c @@ -2025,10 +2025,8 @@ static int lbs_get_essid(struct net_device *dev, struct iw_request_info *info, if (priv->connect_status == LBS_CONNECTED) { memcpy(extra, priv->curbssparams.ssid, priv->curbssparams.ssid_len); - extra[priv->curbssparams.ssid_len] = '\0'; } else { memset(extra, 0, 32); - extra[priv->curbssparams.ssid_len] = '\0'; } /* * If none, we may want to get the one that was set diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index 019431d2f8a..26a1abd5bb0 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -495,7 +495,6 @@ int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb) stats.band = IEEE80211_BAND_2GHZ; stats.signal = prxpd->snr; stats.noise = prxpd->nf; - stats.qual = prxpd->snr - prxpd->nf; /* Marvell rate index has a hole at value 4 */ if (prxpd->rx_rate > 4) --prxpd->rx_rate; diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c index 7698fdd6a3a..31ca241f775 100644 --- a/drivers/net/wireless/orinoco/wext.c +++ b/drivers/net/wireless/orinoco/wext.c @@ -23,7 +23,7 @@ #define MAX_RID_LEN 1024 /* Helper routine to record keys - * Do not call from interrupt context */ + * It is called under orinoco_lock so it may not sleep */ static int orinoco_set_key(struct orinoco_private *priv, int index, enum orinoco_alg alg, const u8 *key, int key_len, const u8 *seq, int seq_len) @@ -32,14 +32,14 @@ static int orinoco_set_key(struct orinoco_private *priv, int index, kzfree(priv->keys[index].seq); if (key_len) { - priv->keys[index].key = kzalloc(key_len, GFP_KERNEL); + priv->keys[index].key = kzalloc(key_len, GFP_ATOMIC); if (!priv->keys[index].key) goto nomem; } else priv->keys[index].key = NULL; if (seq_len) { - priv->keys[index].seq = kzalloc(seq_len, GFP_KERNEL); + priv->keys[index].seq = kzalloc(seq_len, GFP_ATOMIC); if (!priv->keys[index].seq) goto free_key; } else diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index c5fe867665e..1a7eae357fe 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -1323,7 +1323,7 @@ #define PAIRWISE_KEY_ENTRY(__idx) \ ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) #define MAC_IVEIV_ENTRY(__idx) \ - ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) ) + ( MAC_IVEIV_TABLE_BASE + ((__idx) * sizeof(struct mac_iveiv_entry)) ) #define MAC_WCID_ATTR_ENTRY(__idx) \ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) #define SHARED_KEY_ENTRY(__idx) \ diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index eb1e1d00bec..27bf887f145 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -37,7 +37,7 @@ #include <linux/module.h> #include "rt2x00.h" -#ifdef CONFIG_RT2800USB +#if defined(CONFIG_RT2800USB) || defined(CONFIG_RT2800USB_MODULE) #include "rt2x00usb.h" #endif #include "rt2800lib.h" @@ -1121,7 +1121,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) if (rt2x00_intf_is_usb(rt2x00dev)) { rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000); -#ifdef CONFIG_RT2800USB +#if defined(CONFIG_RT2800USB) || defined(CONFIG_RT2800USB_MODULE) rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, USB_MODE_RESET, REGISTER_TIMEOUT); #endif @@ -2022,6 +2022,12 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) u16 eeprom; /* + * Disable powersaving as default on PCI devices. + */ + if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + /* * Initialize all hw fields. */ rt2x00dev->hw->flags = @@ -2074,8 +2080,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_TX_STBC | - IEEE80211_HT_CAP_RX_STBC | - IEEE80211_HT_CAP_PSMP_SUPPORT; + IEEE80211_HT_CAP_RX_STBC; spec->ht.ampdu_factor = 3; spec->ht.ampdu_density = 4; spec->ht.mcs.tx_params = @@ -2140,8 +2145,8 @@ static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, rt2800_register_multiread(rt2x00dev, offset, &iveiv_entry, sizeof(iveiv_entry)); - memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16)); - memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32)); + memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16)); + memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32)); } static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index af85d18cdbe..ab95346cf6a 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -922,6 +922,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Logitec */ { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) }, diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 687e17dc2e9..0ca589306d7 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2539,6 +2539,11 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) unsigned int i; /* + * Disable powersaving as default. + */ + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + /* * Initialize all hw fields. */ rt2x00dev->hw->flags = diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c index a1a3dd15c66..8a40a143998 100644 --- a/drivers/net/wireless/rtl818x/rtl8180_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c @@ -132,7 +132,6 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) rx_status.antenna = (flags2 >> 15) & 1; /* TODO: improve signal/rssi reporting */ - rx_status.qual = flags2 & 0xFF; rx_status.signal = (flags2 >> 8) & 0x7F; /* XXX: is this correct? */ rx_status.rate_idx = (flags >> 20) & 0xF; diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c index 2e733e7bdfd..28a80867408 100644 --- a/drivers/net/wireless/wl12xx/wl1251_boot.c +++ b/drivers/net/wireless/wl12xx/wl1251_boot.c @@ -256,7 +256,7 @@ int wl1251_boot_run_firmware(struct wl1251 *wl) } } - if (loop >= INIT_LOOP) { + if (loop > INIT_LOOP) { wl1251_error("timeout waiting for the hardware to " "complete initialization"); return -EIO; diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c index 886a9bc39cc..c3385b3d246 100644 --- a/drivers/net/wireless/wl12xx/wl1271_cmd.c +++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c @@ -777,7 +777,7 @@ out: return ret; } -static int wl1271_build_basic_rates(char *rates, u8 band) +static int wl1271_build_basic_rates(u8 *rates, u8 band) { u8 index = 0; @@ -804,7 +804,7 @@ static int wl1271_build_basic_rates(char *rates, u8 band) return index; } -static int wl1271_build_extended_rates(char *rates, u8 band) +static int wl1271_build_extended_rates(u8 *rates, u8 band) { u8 index = 0; diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index dfa1b9bc22c..7ca95c414fa 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -1325,151 +1325,11 @@ int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates) return r; } -static int ofdm_qual_db(u8 status_quality, u8 zd_rate, unsigned int size) -{ - static const u16 constants[] = { - 715, 655, 585, 540, 470, 410, 360, 315, - 270, 235, 205, 175, 150, 125, 105, 85, - 65, 50, 40, 25, 15 - }; - - int i; - u32 x; - - /* It seems that their quality parameter is somehow per signal - * and is now transferred per bit. - */ - switch (zd_rate) { - case ZD_OFDM_RATE_6M: - case ZD_OFDM_RATE_12M: - case ZD_OFDM_RATE_24M: - size *= 2; - break; - case ZD_OFDM_RATE_9M: - case ZD_OFDM_RATE_18M: - case ZD_OFDM_RATE_36M: - case ZD_OFDM_RATE_54M: - size *= 4; - size /= 3; - break; - case ZD_OFDM_RATE_48M: - size *= 3; - size /= 2; - break; - default: - return -EINVAL; - } - - x = (10000 * status_quality)/size; - for (i = 0; i < ARRAY_SIZE(constants); i++) { - if (x > constants[i]) - break; - } - - switch (zd_rate) { - case ZD_OFDM_RATE_6M: - case ZD_OFDM_RATE_9M: - i += 3; - break; - case ZD_OFDM_RATE_12M: - case ZD_OFDM_RATE_18M: - i += 5; - break; - case ZD_OFDM_RATE_24M: - case ZD_OFDM_RATE_36M: - i += 9; - break; - case ZD_OFDM_RATE_48M: - case ZD_OFDM_RATE_54M: - i += 15; - break; - default: - return -EINVAL; - } - - return i; -} - -static int ofdm_qual_percent(u8 status_quality, u8 zd_rate, unsigned int size) -{ - int r; - - r = ofdm_qual_db(status_quality, zd_rate, size); - ZD_ASSERT(r >= 0); - if (r < 0) - r = 0; - - r = (r * 100)/29; - return r <= 100 ? r : 100; -} - -static unsigned int log10times100(unsigned int x) -{ - static const u8 log10[] = { - 0, - 0, 30, 47, 60, 69, 77, 84, 90, 95, 100, - 104, 107, 111, 114, 117, 120, 123, 125, 127, 130, - 132, 134, 136, 138, 139, 141, 143, 144, 146, 147, - 149, 150, 151, 153, 154, 155, 156, 157, 159, 160, - 161, 162, 163, 164, 165, 166, 167, 168, 169, 169, - 170, 171, 172, 173, 174, 174, 175, 176, 177, 177, - 178, 179, 179, 180, 181, 181, 182, 183, 183, 184, - 185, 185, 186, 186, 187, 188, 188, 189, 189, 190, - 190, 191, 191, 192, 192, 193, 193, 194, 194, 195, - 195, 196, 196, 197, 197, 198, 198, 199, 199, 200, - 200, 200, 201, 201, 202, 202, 202, 203, 203, 204, - 204, 204, 205, 205, 206, 206, 206, 207, 207, 207, - 208, 208, 208, 209, 209, 210, 210, 210, 211, 211, - 211, 212, 212, 212, 213, 213, 213, 213, 214, 214, - 214, 215, 215, 215, 216, 216, 216, 217, 217, 217, - 217, 218, 218, 218, 219, 219, 219, 219, 220, 220, - 220, 220, 221, 221, 221, 222, 222, 222, 222, 223, - 223, 223, 223, 224, 224, 224, 224, - }; - - return x < ARRAY_SIZE(log10) ? log10[x] : 225; -} - -enum { - MAX_CCK_EVM_DB = 45, -}; - -static int cck_evm_db(u8 status_quality) -{ - return (20 * log10times100(status_quality)) / 100; -} - -static int cck_snr_db(u8 status_quality) -{ - int r = MAX_CCK_EVM_DB - cck_evm_db(status_quality); - ZD_ASSERT(r >= 0); - return r; -} - -static int cck_qual_percent(u8 status_quality) -{ - int r; - - r = cck_snr_db(status_quality); - r = (100*r)/17; - return r <= 100 ? r : 100; -} - static inline u8 zd_rate_from_ofdm_plcp_header(const void *rx_frame) { return ZD_OFDM | zd_ofdm_plcp_header_rate(rx_frame); } -u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size, - const struct rx_status *status) -{ - return (status->frame_status&ZD_RX_OFDM) ? - ofdm_qual_percent(status->signal_quality_ofdm, - zd_rate_from_ofdm_plcp_header(rx_frame), - size) : - cck_qual_percent(status->signal_quality_cck); -} - /** * zd_rx_rate - report zd-rate * @rx_frame - received frame diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h index 9fd8f3508d6..f8bbf7d302a 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.h +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -929,9 +929,6 @@ static inline int zd_get_beacon_interval(struct zd_chip *chip, u32 *interval) struct rx_status; -u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size, - const struct rx_status *status); - u8 zd_rx_rate(const void *rx_frame, const struct rx_status *status); struct zd_mc_hash { diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index cf51e8f8174..8ebf5c33955 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -828,9 +828,6 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq; stats.band = IEEE80211_BAND_2GHZ; stats.signal = status->signal_strength; - stats.qual = zd_rx_qual_percent(buffer, - length - sizeof(struct rx_status), - status); rate = zd_rx_rate(buffer, status); diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index bd588eb8e92..8e210cd76e5 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -121,7 +121,7 @@ struct controller { #define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450 #define PCI_DEVICE_ID_AMD_POGO_7458 0x7458 -/* AMD PCIX bridge registers */ +/* AMD PCI-X bridge registers */ #define PCIX_MEM_BASE_LIMIT_OFFSET 0x1C #define PCIX_MISCII_OFFSET 0x48 #define PCIX_MISC_BRIDGE_ERRORS_OFFSET 0x80 diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index e56f9bed6f2..417312528dd 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -305,7 +305,7 @@ struct device_domain_info { int segment; /* PCI domain */ u8 bus; /* PCI bus number */ u8 devfn; /* PCI devfn number */ - struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */ + struct pci_dev *dev; /* it's NULL for PCIe-to-PCI bridge */ struct intel_iommu *iommu; /* IOMMU used by this device */ struct dmar_domain *domain; /* pointer to domain */ }; @@ -1604,7 +1604,7 @@ domain_context_mapping(struct dmar_domain *domain, struct pci_dev *pdev, return ret; parent = parent->bus->self; } - if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */ + if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */ return domain_context_mapping_one(domain, pci_domain_nr(tmp->subordinate), tmp->subordinate->number, 0, @@ -3325,7 +3325,7 @@ static void iommu_detach_dependent_devices(struct intel_iommu *iommu, parent->devfn); parent = parent->bus->self; } - if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */ + if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */ iommu_detach_dev(iommu, tmp->subordinate->number, 0); else /* this is a legacy PCI bridge */ diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index 8b65a489581..95b849130ad 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -528,7 +528,7 @@ int set_msi_sid(struct irte *irte, struct pci_dev *dev) bridge = pci_find_upstream_pcie_bridge(dev); if (bridge) { - if (pci_is_pcie(bridge))/* this is a PCIE-to-PCI/PCIX bridge */ + if (pci_is_pcie(bridge))/* this is a PCIe-to-PCI/PCIX bridge */ set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16, (bridge->bus->number << 8) | dev->bus->number); else /* this is a legacy PCI bridge */ diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index cc617ddd33d..7e2829538a4 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -112,11 +112,7 @@ static bool acpi_pci_can_wakeup(struct pci_dev *dev) static void acpi_pci_propagate_wakeup_enable(struct pci_bus *bus, bool enable) { while (bus->parent) { - struct pci_dev *bridge = bus->self; - int ret; - - ret = acpi_pm_device_sleep_wake(&bridge->dev, enable); - if (!ret || pci_is_pcie(bridge)) + if (!acpi_pm_device_sleep_wake(&bus->self->dev, enable)) return; bus = bus->parent; } @@ -131,9 +127,7 @@ static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable) if (acpi_pci_can_wakeup(dev)) return acpi_pm_device_sleep_wake(&dev->dev, enable); - if (!pci_is_pcie(dev)) - acpi_pci_propagate_wakeup_enable(dev->bus, enable); - + acpi_pci_propagate_wakeup_enable(dev->bus, enable); return 0; } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 0bc27e05901..0906599ebfd 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1153,11 +1153,11 @@ pci_disable_device(struct pci_dev *dev) /** * pcibios_set_pcie_reset_state - set reset state for device dev - * @dev: the PCI-E device reset + * @dev: the PCIe device reset * @state: Reset state to enter into * * - * Sets the PCI-E reset state for the device. This is the default + * Sets the PCIe reset state for the device. This is the default * implementation. Architecture implementations can override this. */ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, @@ -1168,7 +1168,7 @@ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, /** * pci_set_pcie_reset_state - set reset state for device dev - * @dev: the PCI-E device reset + * @dev: the PCIe device reset * @state: Reset state to enter into * * @@ -2296,6 +2296,10 @@ static int pci_dev_reset(struct pci_dev *dev, int probe) down(&dev->dev.sem); } + rc = pci_dev_specific_reset(dev, probe); + if (rc != -ENOTTY) + goto done; + rc = pcie_flr(dev, probe); if (rc != -ENOTTY) goto done; @@ -2779,6 +2783,11 @@ int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev) return 1; } +void __weak pci_fixup_cardbus(struct pci_bus *bus) +{ +} +EXPORT_SYMBOL(pci_fixup_cardbus); + static int __init pci_setup(char *str) { while (str) { diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 33ed8e0aba1..fbd0e3adbca 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -313,4 +313,12 @@ static inline int pci_resource_alignment(struct pci_dev *dev, extern void pci_enable_acs(struct pci_dev *dev); +struct pci_dev_reset_methods { + u16 vendor; + u16 device; + int (*reset)(struct pci_dev *dev, int probe); +}; + +extern int pci_dev_specific_reset(struct pci_dev *dev, int probe); + #endif /* DRIVERS_PCI_H */ diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug index b8c925c1f6a..9142949734f 100644 --- a/drivers/pci/pcie/aer/Kconfig.debug +++ b/drivers/pci/pcie/aer/Kconfig.debug @@ -3,14 +3,14 @@ # config PCIEAER_INJECT - tristate "PCIE AER error injector support" + tristate "PCIe AER error injector support" depends on PCIEAER default n help This enables PCI Express Root Port Advanced Error Reporting (AER) software error injector. - Debuging PCIE AER code is quite difficult because it is hard + Debugging PCIe AER code is quite difficult because it is hard to trigger various real hardware errors. Software based error injection can fake almost all kinds of errors with the help of a user space helper tool aer-inject, which can be diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 7fcd5331b14..797d47809f7 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -1,7 +1,7 @@ /* - * PCIE AER software error injection support. + * PCIe AER software error injection support. * - * Debuging PCIE AER code is quite difficult because it is hard to + * Debuging PCIe AER code is quite difficult because it is hard to * trigger various real hardware errors. Software based error * injection can fake almost all kinds of errors with the help of a * user space helper tool aer-inject, which can be gotten from: @@ -484,5 +484,5 @@ static void __exit aer_inject_exit(void) module_init(aer_inject_init); module_exit(aer_inject_exit); -MODULE_DESCRIPTION("PCIE AER software error injector"); +MODULE_DESCRIPTION("PCIe AER software error injector"); MODULE_LICENSE("GPL"); diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 97a345927b5..21f215f4daa 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -155,7 +155,7 @@ static struct aer_rpc *aer_alloc_rpc(struct pcie_device *dev) mutex_init(&rpc->rpc_mutex); init_waitqueue_head(&rpc->wait_release); - /* Use PCIE bus function to store rpc into PCIE device */ + /* Use PCIe bus function to store rpc into PCIe device */ set_service_data(dev, rpc); return rpc; diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c index 8edb2f300e8..04814087658 100644 --- a/drivers/pci/pcie/aer/aerdrv_acpi.c +++ b/drivers/pci/pcie/aer/aerdrv_acpi.c @@ -24,7 +24,7 @@ * * @return: Zero on success. Nonzero otherwise. * - * Invoked when PCIE bus loads AER service driver. To avoid conflict with + * Invoked when PCIe bus loads AER service driver. To avoid conflict with * BIOS AER support requires BIOS to yield AER control to OS native driver. **/ int aer_osc_setup(struct pcie_device *pciedev) diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index ae672ca8033..c843a799814 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -587,7 +587,7 @@ static void handle_error_source(struct pcie_device *aerdev, * aer_enable_rootport - enable Root Port's interrupts when receiving messages * @rpc: pointer to a Root Port data structure * - * Invoked when PCIE bus loads AER service driver. + * Invoked when PCIe bus loads AER service driver. */ void aer_enable_rootport(struct aer_rpc *rpc) { @@ -597,7 +597,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) u32 reg32; pos = pci_pcie_cap(pdev); - /* Clear PCIE Capability's Device Status */ + /* Clear PCIe Capability's Device Status */ pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, ®16); pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16); @@ -631,7 +631,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) * disable_root_aer - disable Root Port's interrupts when receiving messages * @rpc: pointer to a Root Port data structure * - * Invoked when PCIE bus unloads AER service driver. + * Invoked when PCIe bus unloads AER service driver. */ static void disable_root_aer(struct aer_rpc *rpc) { diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 44acde72294..9d3e4c8d018 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -184,7 +184,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) if (info->status == 0) { AER_PR(info, dev, - "PCIE Bus Error: severity=%s, type=Unaccessible, " + "PCIe Bus Error: severity=%s, type=Unaccessible, " "id=%04x(Unregistered Agent ID)\n", aer_error_severity_string[info->severity], id); } else { @@ -194,7 +194,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) agent = AER_GET_AGENT(info->severity, info->status); AER_PR(info, dev, - "PCIE Bus Error: severity=%s, type=%s, id=%04x(%s)\n", + "PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n", aer_error_severity_string[info->severity], aer_error_layer[layer], id, aer_agent_string[agent]); diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 5a01fc7fbf0..be53d98fa38 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -1,6 +1,6 @@ /* * File: drivers/pci/pcie/aspm.c - * Enabling PCIE link L0s/L1 state and Clock Power Management + * Enabling PCIe link L0s/L1 state and Clock Power Management * * Copyright (C) 2007 Intel * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com) @@ -499,7 +499,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) int pos; u32 reg32; /* - * Some functions in a slot might not all be PCIE functions, + * Some functions in a slot might not all be PCIe functions, * very strange. Disable ASPM for the whole slot */ list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index a49452e2aed..34d65172a4d 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -24,7 +24,7 @@ */ #define DRIVER_VERSION "v1.0" #define DRIVER_AUTHOR "tom.l.nguyen@intel.com" -#define DRIVER_DESC "PCIE Port Bus Driver" +#define DRIVER_DESC "PCIe Port Bus Driver" MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 7cfa7c38d31..c74694345b6 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2629,14 +2629,86 @@ static int __init pci_apply_final_quirks(void) if (!pci_cache_line_size) { printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n", cls << 2, pci_dfl_cache_line_size << 2); - pci_cache_line_size = cls; + pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; } return 0; } fs_initcall_sync(pci_apply_final_quirks); + +/* + * Followings are device-specific reset methods which can be used to + * reset a single function if other methods (e.g. FLR, PM D0->D3) are + * not available. + */ +static int reset_intel_generic_dev(struct pci_dev *dev, int probe) +{ + int pos; + + /* only implement PCI_CLASS_SERIAL_USB at present */ + if (dev->class == PCI_CLASS_SERIAL_USB) { + pos = pci_find_capability(dev, PCI_CAP_ID_VNDR); + if (!pos) + return -ENOTTY; + + if (probe) + return 0; + + pci_write_config_byte(dev, pos + 0x4, 1); + msleep(100); + + return 0; + } else { + return -ENOTTY; + } +} + +static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) +{ + int pos; + + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (!pos) + return -ENOTTY; + + if (probe) + return 0; + + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_BCR_FLR); + msleep(100); + + return 0; +} + +#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed + +static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, + reset_intel_82599_sfp_virtfn }, + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, + reset_intel_generic_dev }, + { 0 } +}; + +int pci_dev_specific_reset(struct pci_dev *dev, int probe) +{ + const struct pci_dev_reset_methods *i; + + for (i = pci_dev_reset_methods; i->reset; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) + return i->reset(dev, probe); + } + + return -ENOTTY; +} + #else void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} +int pci_dev_specific_reset(struct pci_dev *dev, int probe) { return -ENOTTY; } #endif EXPORT_SYMBOL(pci_fixup_device); diff --git a/drivers/pci/search.c b/drivers/pci/search.c index 6dae8714325..4a471dc4f4b 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -15,9 +15,9 @@ DECLARE_RWSEM(pci_bus_sem); /* - * find the upstream PCIE-to-PCI bridge of a PCI device + * find the upstream PCIe-to-PCI bridge of a PCI device * if the device is PCIE, return NULL - * if the device isn't connected to a PCIE bridge (that is its parent is a + * if the device isn't connected to a PCIe bridge (that is its parent is a * legacy PCI bridge and the bridge is directly connected to bus 0), return its * parent */ @@ -37,7 +37,7 @@ pci_find_upstream_pcie_bridge(struct pci_dev *pdev) tmp = pdev; continue; } - /* PCI device should connect to a PCIE bridge */ + /* PCI device should connect to a PCIe bridge */ if (pdev->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE) { /* Busted hardware? */ WARN_ON_ONCE(1); diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c index cdf50f3bc2d..d99f846451a 100644 --- a/drivers/pcmcia/cardbus.c +++ b/drivers/pcmcia/cardbus.c @@ -222,7 +222,7 @@ int __ref cb_alloc(struct pcmcia_socket *s) unsigned int max, pass; s->functions = pci_scan_slot(bus, PCI_DEVFN(0, 0)); -/* pcibios_fixup_bus(bus); */ + pci_fixup_cardbus(bus); max = bus->secondary; for (pass = 0; pass < 2; pass++) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index fc5bf9d2a3f..db32c25e360 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -231,8 +231,36 @@ config THINKPAD_ACPI This driver was formerly known as ibm-acpi. + Extra functionality will be available if the rfkill (CONFIG_RFKILL) + and/or ALSA (CONFIG_SND) subsystems are available in the kernel. + Note that if you want ThinkPad-ACPI to be built-in instead of + modular, ALSA and rfkill will also have to be built-in. + If you have an IBM or Lenovo ThinkPad laptop, say Y or M here. +config THINKPAD_ACPI_ALSA_SUPPORT + bool "Console audio control ALSA interface" + depends on THINKPAD_ACPI + depends on SND + depends on SND = y || THINKPAD_ACPI = SND + default y + ---help--- + Enables monitoring of the built-in console audio output control + (headphone and speakers), which is operated by the mute and (in + some ThinkPad models) volume hotkeys. + + If this option is enabled, ThinkPad-ACPI will export an ALSA card + with a single read-only mixer control, which should be used for + on-screen-display feedback purposes by the Desktop Environment. + + Optionally, the driver will also allow software control (the + ALSA mixer will be made read-write). Please refer to the driver + documentation for details. + + All IBM models have both volume and mute control. Newer Lenovo + models only have mute control (the volume hotkeys are just normal + keys and volume control is done through the main HDA mixer). + config THINKPAD_ACPI_DEBUGFACILITIES bool "Maintainer debug facilities" depends on THINKPAD_ACPI @@ -464,4 +492,16 @@ config TOSHIBA_BT_RFKILL If you have a modern Toshiba laptop with a Bluetooth and an RFKill switch (such as the Portege R500), say Y. + +config ACPI_CMPC + tristate "CMPC Laptop Extras" + depends on X86 && ACPI + select INPUT + select BACKLIGHT_CLASS_DEVICE + default n + help + Support for Intel Classmate PC ACPI devices, including some + keys as input device, backlight device, tablet and accelerometer + devices. + endif # X86_PLATFORM_DEVICES diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index b7474b6a8bf..9cd9fa0a27e 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o +obj-$(CONFIG_ACPI_CMPC) += classmate-laptop.o obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o obj-$(CONFIG_DELL_WMI) += dell-wmi.o diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 454970d2d70..07d14dfdf0b 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -96,9 +96,6 @@ struct acer_quirks { MODULE_ALIAS("wmi:67C3371D-95A3-4C37-BB61-DD47B491DAAB"); MODULE_ALIAS("wmi:6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3"); -/* Temporary workaround until the WMI sysfs interface goes in */ -MODULE_ALIAS("dmi:*:*Acer*:*:"); - /* * Interface capability flags */ diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 79b15b9d9cf..7b2384d674d 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -52,7 +52,7 @@ */ #undef START_IN_KERNEL_MODE -#define DRV_VER "0.5.20" +#define DRV_VER "0.5.22" /* * According to the Atom N270 datasheet, @@ -156,19 +156,25 @@ static const struct bios_settings_t bios_tbl[] = { {"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x20, 0x00} }, /* Acer 1410 */ {"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, - /* special BIOS / other */ + {"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, + /* Acer 1810xx */ + {"Acer", "Aspire 1810TZ", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, + {"Acer", "Aspire 1810T", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, + {"Acer", "Aspire 1810T", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, + {"Acer", "Aspire 1810TZ", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, + /* Gateway */ {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x21, 0x00} }, {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x20, 0x00} }, - {"Gateway ", "LT31 ", "v1.3103 ", 0x55, 0x58, - {0x10, 0x0f, 0x00} }, - {"Gateway ", "LT31 ", "v1.3201 ", 0x55, 0x58, - {0x10, 0x0f, 0x00} }, - {"Gateway ", "LT31 ", "v1.3302 ", 0x55, 0x58, - {0x10, 0x0f, 0x00} }, + {"Gateway", "LT31", "v1.3103", 0x55, 0x58, {0x10, 0x0f, 0x00} }, + {"Gateway", "LT31", "v1.3201", 0x55, 0x58, {0x10, 0x0f, 0x00} }, + {"Gateway", "LT31", "v1.3302", 0x55, 0x58, {0x10, 0x0f, 0x00} }, + /* Packard Bell */ {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x21, 0x00} }, {"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x20, 0x00} }, {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x21, 0x00} }, {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x20, 0x00} }, + {"Packard Bell", "DOTMU", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} }, /* pewpew-terminator */ {"", "", "", 0, 0, {0, 0, 0} } }; @@ -486,13 +492,26 @@ static struct platform_driver acerhdf_driver = { .remove = acerhdf_remove, }; +/* checks if str begins with start */ +static int str_starts_with(const char *str, const char *start) +{ + unsigned long str_len = 0, start_len = 0; + + str_len = strlen(str); + start_len = strlen(start); + + if (str_len >= start_len && + !strncmp(str, start, start_len)) + return 1; + + return 0; +} /* check hardware */ static int acerhdf_check_hardware(void) { char const *vendor, *version, *product; - int i; - unsigned long prod_len = 0; + const struct bios_settings_t *bt = NULL; /* get BIOS data */ vendor = dmi_get_system_info(DMI_SYS_VENDOR); @@ -514,20 +533,20 @@ static int acerhdf_check_hardware(void) kernelmode = 0; } - prod_len = strlen(product); - if (verbose) pr_info("BIOS info: %s %s, product: %s\n", vendor, version, product); /* search BIOS version and vendor in BIOS settings table */ - for (i = 0; bios_tbl[i].version[0]; i++) { - if (strlen(bios_tbl[i].product) >= prod_len && - !strncmp(bios_tbl[i].product, product, - strlen(bios_tbl[i].product)) && - !strcmp(bios_tbl[i].vendor, vendor) && - !strcmp(bios_tbl[i].version, version)) { - bios_cfg = &bios_tbl[i]; + for (bt = bios_tbl; bt->vendor[0]; bt++) { + /* + * check if actual hardware BIOS vendor, product and version + * IDs start with the strings of BIOS table entry + */ + if (str_starts_with(vendor, bt->vendor) && + str_starts_with(product, bt->product) && + str_starts_with(version, bt->version)) { + bios_cfg = bt; break; } } @@ -640,9 +659,14 @@ static void __exit acerhdf_exit(void) MODULE_LICENSE("GPL"); MODULE_AUTHOR("Peter Feuerer"); MODULE_DESCRIPTION("Aspire One temperature and fan driver"); -MODULE_ALIAS("dmi:*:*Acer*:*:"); -MODULE_ALIAS("dmi:*:*Gateway*:*:"); -MODULE_ALIAS("dmi:*:*Packard Bell*:*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAspire 1410*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAspire 1810*:"); +MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:"); +MODULE_ALIAS("dmi:*:*Packard Bell*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOA*:"); +MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOTMU*:"); module_init(acerhdf_init); module_exit(acerhdf_exit); diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c index 0c9c53111a2..c1d2aeeea94 100644 --- a/drivers/platform/x86/asus_acpi.c +++ b/drivers/platform/x86/asus_acpi.c @@ -35,6 +35,7 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/backlight.h> #include <acpi/acpi_drivers.h> #include <acpi/acpi_bus.h> @@ -513,26 +514,12 @@ static int read_acpi_int(acpi_handle handle, const char *method, int *val) return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER); } -/* - * We write our info in page, we begin at offset off and cannot write more - * than count bytes. We set eof to 1 if we handle those 2 values. We return the - * number of bytes written in page - */ -static int -proc_read_info(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int asus_info_proc_show(struct seq_file *m, void *v) { - int len = 0; int temp; - char buf[16]; /* enough for all info */ - /* - * We use the easy way, we don't care of off and count, - * so we don't set eof to 1 - */ - len += sprintf(page, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n"); - len += sprintf(page + len, "Model reference : %s\n", - hotk->methods->name); + seq_printf(m, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n"); + seq_printf(m, "Model reference : %s\n", hotk->methods->name); /* * The SFUN method probably allows the original driver to get the list * of features supported by a given model. For now, 0x0100 or 0x0800 @@ -540,8 +527,7 @@ proc_read_info(char *page, char **start, off_t off, int count, int *eof, * The significance of others is yet to be found. */ if (read_acpi_int(hotk->handle, "SFUN", &temp)) - len += - sprintf(page + len, "SFUN value : 0x%04x\n", temp); + seq_printf(m, "SFUN value : 0x%04x\n", temp); /* * Another value for userspace: the ASYM method returns 0x02 for * battery low and 0x04 for battery critical, its readings tend to be @@ -550,30 +536,34 @@ proc_read_info(char *page, char **start, off_t off, int count, int *eof, * silently ignored. */ if (read_acpi_int(hotk->handle, "ASYM", &temp)) - len += - sprintf(page + len, "ASYM value : 0x%04x\n", temp); + seq_printf(m, "ASYM value : 0x%04x\n", temp); if (asus_info) { - snprintf(buf, 16, "%d", asus_info->length); - len += sprintf(page + len, "DSDT length : %s\n", buf); - snprintf(buf, 16, "%d", asus_info->checksum); - len += sprintf(page + len, "DSDT checksum : %s\n", buf); - snprintf(buf, 16, "%d", asus_info->revision); - len += sprintf(page + len, "DSDT revision : %s\n", buf); - snprintf(buf, 7, "%s", asus_info->oem_id); - len += sprintf(page + len, "OEM id : %s\n", buf); - snprintf(buf, 9, "%s", asus_info->oem_table_id); - len += sprintf(page + len, "OEM table id : %s\n", buf); - snprintf(buf, 16, "%x", asus_info->oem_revision); - len += sprintf(page + len, "OEM revision : 0x%s\n", buf); - snprintf(buf, 5, "%s", asus_info->asl_compiler_id); - len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); - snprintf(buf, 16, "%x", asus_info->asl_compiler_revision); - len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); + seq_printf(m, "DSDT length : %d\n", asus_info->length); + seq_printf(m, "DSDT checksum : %d\n", asus_info->checksum); + seq_printf(m, "DSDT revision : %d\n", asus_info->revision); + seq_printf(m, "OEM id : %.*s\n", ACPI_OEM_ID_SIZE, asus_info->oem_id); + seq_printf(m, "OEM table id : %.*s\n", ACPI_OEM_TABLE_ID_SIZE, asus_info->oem_table_id); + seq_printf(m, "OEM revision : 0x%x\n", asus_info->oem_revision); + seq_printf(m, "ASL comp vendor id : %.*s\n", ACPI_NAME_SIZE, asus_info->asl_compiler_id); + seq_printf(m, "ASL comp revision : 0x%x\n", asus_info->asl_compiler_revision); } - return len; + return 0; +} + +static int asus_info_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, asus_info_proc_show, NULL); } +static const struct file_operations asus_info_proc_fops = { + .owner = THIS_MODULE, + .open = asus_info_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /* * /proc handlers * We write our info in page, we begin at offset off and cannot write more @@ -639,34 +629,48 @@ write_led(const char __user *buffer, unsigned long count, /* * Proc handlers for MLED */ -static int -proc_read_mled(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int mled_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", - read_led(hotk->methods->mled_status, MLED_ON)); + seq_printf(m, "%d\n", read_led(hotk->methods->mled_status, MLED_ON)); + return 0; } -static int -proc_write_mled(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int mled_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mled_proc_show, NULL); +} + +static ssize_t mled_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1); } +static const struct file_operations mled_proc_fops = { + .owner = THIS_MODULE, + .open = mled_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = mled_proc_write, +}; + /* * Proc handlers for LED display */ -static int -proc_read_ledd(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int ledd_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "0x%08x\n", hotk->ledd_status); + seq_printf(m, "0x%08x\n", hotk->ledd_status); + return 0; } -static int -proc_write_ledd(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int ledd_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ledd_proc_show, NULL); +} + +static ssize_t ledd_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { int rv, value; @@ -682,61 +686,104 @@ proc_write_ledd(struct file *file, const char __user *buffer, return rv; } +static const struct file_operations ledd_proc_fops = { + .owner = THIS_MODULE, + .open = ledd_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = ledd_proc_write, +}; + /* * Proc handlers for WLED */ -static int -proc_read_wled(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int wled_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", - read_led(hotk->methods->wled_status, WLED_ON)); + seq_printf(m, "%d\n", read_led(hotk->methods->wled_status, WLED_ON)); + return 0; } -static int -proc_write_wled(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int wled_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, wled_proc_show, NULL); +} + +static ssize_t wled_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0); } +static const struct file_operations wled_proc_fops = { + .owner = THIS_MODULE, + .open = wled_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = wled_proc_write, +}; + /* * Proc handlers for Bluetooth */ -static int -proc_read_bluetooth(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int bluetooth_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", read_led(hotk->methods->bt_status, BT_ON)); + seq_printf(m, "%d\n", read_led(hotk->methods->bt_status, BT_ON)); + return 0; } -static int -proc_write_bluetooth(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int bluetooth_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, bluetooth_proc_show, NULL); +} + +static ssize_t bluetooth_proc_write(struct file *file, + const char __user *buffer, size_t count, loff_t *pos) { /* Note: mt_bt_switch controls both internal Bluetooth adapter's presence and its LED */ return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0); } +static const struct file_operations bluetooth_proc_fops = { + .owner = THIS_MODULE, + .open = bluetooth_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = bluetooth_proc_write, +}; + /* * Proc handlers for TLED */ -static int -proc_read_tled(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int tled_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", - read_led(hotk->methods->tled_status, TLED_ON)); + seq_printf(m, "%d\n", read_led(hotk->methods->tled_status, TLED_ON)); + return 0; } -static int -proc_write_tled(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int tled_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, tled_proc_show, NULL); +} + +static ssize_t tled_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0); } +static const struct file_operations tled_proc_fops = { + .owner = THIS_MODULE, + .open = tled_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = tled_proc_write, +}; + static int get_lcd_state(void) { int lcd = 0; @@ -829,16 +876,19 @@ static int set_lcd_state(int value) } -static int -proc_read_lcd(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int lcd_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", get_lcd_state()); + seq_printf(m, "%d\n", get_lcd_state()); + return 0; } -static int -proc_write_lcd(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int lcd_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, lcd_proc_show, NULL); +} + +static ssize_t lcd_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { int rv, value; @@ -848,6 +898,15 @@ proc_write_lcd(struct file *file, const char __user *buffer, return rv; } +static const struct file_operations lcd_proc_fops = { + .owner = THIS_MODULE, + .open = lcd_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = lcd_proc_write, +}; + static int read_brightness(struct backlight_device *bd) { int value; @@ -907,16 +966,19 @@ static int set_brightness_status(struct backlight_device *bd) return set_brightness(bd->props.brightness); } -static int -proc_read_brn(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int brn_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", read_brightness(NULL)); + seq_printf(m, "%d\n", read_brightness(NULL)); + return 0; } -static int -proc_write_brn(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int brn_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, brn_proc_show, NULL); +} + +static ssize_t brn_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { int rv, value; @@ -929,6 +991,15 @@ proc_write_brn(struct file *file, const char __user *buffer, return rv; } +static const struct file_operations brn_proc_fops = { + .owner = THIS_MODULE, + .open = brn_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = brn_proc_write, +}; + static void set_display(int value) { /* no sanity check needed for now */ @@ -942,9 +1013,7 @@ static void set_display(int value) * Now, *this* one could be more user-friendly, but so far, no-one has * complained. The significance of bits is the same as in proc_write_disp() */ -static int -proc_read_disp(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int disp_proc_show(struct seq_file *m, void *v) { int value = 0; @@ -952,7 +1021,13 @@ proc_read_disp(char *page, char **start, off_t off, int count, int *eof, printk(KERN_WARNING "Asus ACPI: Error reading display status\n"); value &= 0x07; /* needed for some models, shouldn't hurt others */ - return sprintf(page, "%d\n", value); + seq_printf(m, "%d\n", value); + return 0; +} + +static int disp_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, disp_proc_show, NULL); } /* @@ -961,9 +1036,8 @@ proc_read_disp(char *page, char **start, off_t off, int count, int *eof, * (bitwise) of these will suffice. I never actually tested 3 displays hooked * up simultaneously, so be warned. See the acpi4asus README for more info. */ -static int -proc_write_disp(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t disp_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { int rv, value; @@ -973,25 +1047,27 @@ proc_write_disp(struct file *file, const char __user *buffer, return rv; } -typedef int (proc_readfunc) (char *page, char **start, off_t off, int count, - int *eof, void *data); -typedef int (proc_writefunc) (struct file *file, const char __user *buffer, - unsigned long count, void *data); +static const struct file_operations disp_proc_fops = { + .owner = THIS_MODULE, + .open = disp_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = disp_proc_write, +}; static int -asus_proc_add(char *name, proc_writefunc *writefunc, - proc_readfunc *readfunc, mode_t mode, +asus_proc_add(char *name, const struct file_operations *proc_fops, mode_t mode, struct acpi_device *device) { - struct proc_dir_entry *proc = - create_proc_entry(name, mode, acpi_device_dir(device)); + struct proc_dir_entry *proc; + + proc = proc_create_data(name, mode, acpi_device_dir(device), + proc_fops, acpi_driver_data(device)); if (!proc) { printk(KERN_WARNING " Unable to create %s fs entry\n", name); return -1; } - proc->write_proc = writefunc; - proc->read_proc = readfunc; - proc->data = acpi_driver_data(device); proc->uid = asus_uid; proc->gid = asus_gid; return 0; @@ -1020,10 +1096,9 @@ static int asus_hotk_add_fs(struct acpi_device *device) if (!acpi_device_dir(device)) return -ENODEV; - proc = create_proc_entry(PROC_INFO, mode, acpi_device_dir(device)); + proc = proc_create(PROC_INFO, mode, acpi_device_dir(device), + &asus_info_proc_fops); if (proc) { - proc->read_proc = proc_read_info; - proc->data = acpi_driver_data(device); proc->uid = asus_uid; proc->gid = asus_gid; } else { @@ -1032,28 +1107,23 @@ static int asus_hotk_add_fs(struct acpi_device *device) } if (hotk->methods->mt_wled) { - asus_proc_add(PROC_WLED, &proc_write_wled, &proc_read_wled, - mode, device); + asus_proc_add(PROC_WLED, &wled_proc_fops, mode, device); } if (hotk->methods->mt_ledd) { - asus_proc_add(PROC_LEDD, &proc_write_ledd, &proc_read_ledd, - mode, device); + asus_proc_add(PROC_LEDD, &ledd_proc_fops, mode, device); } if (hotk->methods->mt_mled) { - asus_proc_add(PROC_MLED, &proc_write_mled, &proc_read_mled, - mode, device); + asus_proc_add(PROC_MLED, &mled_proc_fops, mode, device); } if (hotk->methods->mt_tled) { - asus_proc_add(PROC_TLED, &proc_write_tled, &proc_read_tled, - mode, device); + asus_proc_add(PROC_TLED, &tled_proc_fops, mode, device); } if (hotk->methods->mt_bt_switch) { - asus_proc_add(PROC_BT, &proc_write_bluetooth, - &proc_read_bluetooth, mode, device); + asus_proc_add(PROC_BT, &bluetooth_proc_fops, mode, device); } /* @@ -1061,19 +1131,16 @@ static int asus_hotk_add_fs(struct acpi_device *device) * accessible from the keyboard */ if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) { - asus_proc_add(PROC_LCD, &proc_write_lcd, &proc_read_lcd, mode, - device); + asus_proc_add(PROC_LCD, &lcd_proc_fops, mode, device); } if ((hotk->methods->brightness_up && hotk->methods->brightness_down) || (hotk->methods->brightness_get && hotk->methods->brightness_set)) { - asus_proc_add(PROC_BRN, &proc_write_brn, &proc_read_brn, mode, - device); + asus_proc_add(PROC_BRN, &brn_proc_fops, mode, device); } if (hotk->methods->display_set) { - asus_proc_add(PROC_DISP, &proc_write_disp, &proc_read_disp, - mode, device); + asus_proc_add(PROC_DISP, &disp_proc_fops, mode, device); } return 0; diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c new file mode 100644 index 00000000000..ed90082cdf1 --- /dev/null +++ b/drivers/platform/x86/classmate-laptop.c @@ -0,0 +1,609 @@ +/* + * Copyright (C) 2009 Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/workqueue.h> +#include <acpi/acpi_drivers.h> +#include <linux/backlight.h> +#include <linux/input.h> + +MODULE_LICENSE("GPL"); + + +struct cmpc_accel { + int sensitivity; +}; + +#define CMPC_ACCEL_SENSITIVITY_DEFAULT 5 + + +/* + * Generic input device code. + */ + +typedef void (*input_device_init)(struct input_dev *dev); + +static int cmpc_add_acpi_notify_device(struct acpi_device *acpi, char *name, + input_device_init idev_init) +{ + struct input_dev *inputdev; + int error; + + inputdev = input_allocate_device(); + if (!inputdev) + return -ENOMEM; + inputdev->name = name; + inputdev->dev.parent = &acpi->dev; + idev_init(inputdev); + error = input_register_device(inputdev); + if (error) { + input_free_device(inputdev); + return error; + } + dev_set_drvdata(&acpi->dev, inputdev); + return 0; +} + +static int cmpc_remove_acpi_notify_device(struct acpi_device *acpi) +{ + struct input_dev *inputdev = dev_get_drvdata(&acpi->dev); + input_unregister_device(inputdev); + return 0; +} + +/* + * Accelerometer code. + */ +static acpi_status cmpc_start_accel(acpi_handle handle) +{ + union acpi_object param[2]; + struct acpi_object_list input; + acpi_status status; + + param[0].type = ACPI_TYPE_INTEGER; + param[0].integer.value = 0x3; + param[1].type = ACPI_TYPE_INTEGER; + input.count = 2; + input.pointer = param; + status = acpi_evaluate_object(handle, "ACMD", &input, NULL); + return status; +} + +static acpi_status cmpc_stop_accel(acpi_handle handle) +{ + union acpi_object param[2]; + struct acpi_object_list input; + acpi_status status; + + param[0].type = ACPI_TYPE_INTEGER; + param[0].integer.value = 0x4; + param[1].type = ACPI_TYPE_INTEGER; + input.count = 2; + input.pointer = param; + status = acpi_evaluate_object(handle, "ACMD", &input, NULL); + return status; +} + +static acpi_status cmpc_accel_set_sensitivity(acpi_handle handle, int val) +{ + union acpi_object param[2]; + struct acpi_object_list input; + + param[0].type = ACPI_TYPE_INTEGER; + param[0].integer.value = 0x02; + param[1].type = ACPI_TYPE_INTEGER; + param[1].integer.value = val; + input.count = 2; + input.pointer = param; + return acpi_evaluate_object(handle, "ACMD", &input, NULL); +} + +static acpi_status cmpc_get_accel(acpi_handle handle, + unsigned char *x, + unsigned char *y, + unsigned char *z) +{ + union acpi_object param[2]; + struct acpi_object_list input; + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, 0 }; + unsigned char *locs; + acpi_status status; + + param[0].type = ACPI_TYPE_INTEGER; + param[0].integer.value = 0x01; + param[1].type = ACPI_TYPE_INTEGER; + input.count = 2; + input.pointer = param; + status = acpi_evaluate_object(handle, "ACMD", &input, &output); + if (ACPI_SUCCESS(status)) { + union acpi_object *obj; + obj = output.pointer; + locs = obj->buffer.pointer; + *x = locs[0]; + *y = locs[1]; + *z = locs[2]; + kfree(output.pointer); + } + return status; +} + +static void cmpc_accel_handler(struct acpi_device *dev, u32 event) +{ + if (event == 0x81) { + unsigned char x, y, z; + acpi_status status; + + status = cmpc_get_accel(dev->handle, &x, &y, &z); + if (ACPI_SUCCESS(status)) { + struct input_dev *inputdev = dev_get_drvdata(&dev->dev); + + input_report_abs(inputdev, ABS_X, x); + input_report_abs(inputdev, ABS_Y, y); + input_report_abs(inputdev, ABS_Z, z); + input_sync(inputdev); + } + } +} + +static ssize_t cmpc_accel_sensitivity_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct acpi_device *acpi; + struct input_dev *inputdev; + struct cmpc_accel *accel; + + acpi = to_acpi_device(dev); + inputdev = dev_get_drvdata(&acpi->dev); + accel = dev_get_drvdata(&inputdev->dev); + + return sprintf(buf, "%d\n", accel->sensitivity); +} + +static ssize_t cmpc_accel_sensitivity_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct acpi_device *acpi; + struct input_dev *inputdev; + struct cmpc_accel *accel; + unsigned long sensitivity; + int r; + + acpi = to_acpi_device(dev); + inputdev = dev_get_drvdata(&acpi->dev); + accel = dev_get_drvdata(&inputdev->dev); + + r = strict_strtoul(buf, 0, &sensitivity); + if (r) + return r; + + accel->sensitivity = sensitivity; + cmpc_accel_set_sensitivity(acpi->handle, sensitivity); + + return strnlen(buf, count); +} + +struct device_attribute cmpc_accel_sensitivity_attr = { + .attr = { .name = "sensitivity", .mode = 0660 }, + .show = cmpc_accel_sensitivity_show, + .store = cmpc_accel_sensitivity_store +}; + +static int cmpc_accel_open(struct input_dev *input) +{ + struct acpi_device *acpi; + + acpi = to_acpi_device(input->dev.parent); + if (ACPI_SUCCESS(cmpc_start_accel(acpi->handle))) + return 0; + return -EIO; +} + +static void cmpc_accel_close(struct input_dev *input) +{ + struct acpi_device *acpi; + + acpi = to_acpi_device(input->dev.parent); + cmpc_stop_accel(acpi->handle); +} + +static void cmpc_accel_idev_init(struct input_dev *inputdev) +{ + set_bit(EV_ABS, inputdev->evbit); + input_set_abs_params(inputdev, ABS_X, 0, 255, 8, 0); + input_set_abs_params(inputdev, ABS_Y, 0, 255, 8, 0); + input_set_abs_params(inputdev, ABS_Z, 0, 255, 8, 0); + inputdev->open = cmpc_accel_open; + inputdev->close = cmpc_accel_close; +} + +static int cmpc_accel_add(struct acpi_device *acpi) +{ + int error; + struct input_dev *inputdev; + struct cmpc_accel *accel; + + accel = kmalloc(sizeof(*accel), GFP_KERNEL); + if (!accel) + return -ENOMEM; + + accel->sensitivity = CMPC_ACCEL_SENSITIVITY_DEFAULT; + cmpc_accel_set_sensitivity(acpi->handle, accel->sensitivity); + + error = device_create_file(&acpi->dev, &cmpc_accel_sensitivity_attr); + if (error) + goto failed_file; + + error = cmpc_add_acpi_notify_device(acpi, "cmpc_accel", + cmpc_accel_idev_init); + if (error) + goto failed_input; + + inputdev = dev_get_drvdata(&acpi->dev); + dev_set_drvdata(&inputdev->dev, accel); + + return 0; + +failed_input: + device_remove_file(&acpi->dev, &cmpc_accel_sensitivity_attr); +failed_file: + kfree(accel); + return error; +} + +static int cmpc_accel_remove(struct acpi_device *acpi, int type) +{ + struct input_dev *inputdev; + struct cmpc_accel *accel; + + inputdev = dev_get_drvdata(&acpi->dev); + accel = dev_get_drvdata(&inputdev->dev); + + device_remove_file(&acpi->dev, &cmpc_accel_sensitivity_attr); + return cmpc_remove_acpi_notify_device(acpi); +} + +static const struct acpi_device_id cmpc_accel_device_ids[] = { + {"ACCE0000", 0}, + {"", 0} +}; +MODULE_DEVICE_TABLE(acpi, cmpc_accel_device_ids); + +static struct acpi_driver cmpc_accel_acpi_driver = { + .owner = THIS_MODULE, + .name = "cmpc_accel", + .class = "cmpc_accel", + .ids = cmpc_accel_device_ids, + .ops = { + .add = cmpc_accel_add, + .remove = cmpc_accel_remove, + .notify = cmpc_accel_handler, + } +}; + + +/* + * Tablet mode code. + */ +static acpi_status cmpc_get_tablet(acpi_handle handle, + unsigned long long *value) +{ + union acpi_object param; + struct acpi_object_list input; + unsigned long long output; + acpi_status status; + + param.type = ACPI_TYPE_INTEGER; + param.integer.value = 0x01; + input.count = 1; + input.pointer = ¶m; + status = acpi_evaluate_integer(handle, "TCMD", &input, &output); + if (ACPI_SUCCESS(status)) + *value = output; + return status; +} + +static void cmpc_tablet_handler(struct acpi_device *dev, u32 event) +{ + unsigned long long val = 0; + struct input_dev *inputdev = dev_get_drvdata(&dev->dev); + + if (event == 0x81) { + if (ACPI_SUCCESS(cmpc_get_tablet(dev->handle, &val))) + input_report_switch(inputdev, SW_TABLET_MODE, !val); + } +} + +static void cmpc_tablet_idev_init(struct input_dev *inputdev) +{ + unsigned long long val = 0; + struct acpi_device *acpi; + + set_bit(EV_SW, inputdev->evbit); + set_bit(SW_TABLET_MODE, inputdev->swbit); + + acpi = to_acpi_device(inputdev->dev.parent); + if (ACPI_SUCCESS(cmpc_get_tablet(acpi->handle, &val))) + input_report_switch(inputdev, SW_TABLET_MODE, !val); +} + +static int cmpc_tablet_add(struct acpi_device *acpi) +{ + return cmpc_add_acpi_notify_device(acpi, "cmpc_tablet", + cmpc_tablet_idev_init); +} + +static int cmpc_tablet_remove(struct acpi_device *acpi, int type) +{ + return cmpc_remove_acpi_notify_device(acpi); +} + +static int cmpc_tablet_resume(struct acpi_device *acpi) +{ + struct input_dev *inputdev = dev_get_drvdata(&acpi->dev); + unsigned long long val = 0; + if (ACPI_SUCCESS(cmpc_get_tablet(acpi->handle, &val))) + input_report_switch(inputdev, SW_TABLET_MODE, !val); + return 0; +} + +static const struct acpi_device_id cmpc_tablet_device_ids[] = { + {"TBLT0000", 0}, + {"", 0} +}; +MODULE_DEVICE_TABLE(acpi, cmpc_tablet_device_ids); + +static struct acpi_driver cmpc_tablet_acpi_driver = { + .owner = THIS_MODULE, + .name = "cmpc_tablet", + .class = "cmpc_tablet", + .ids = cmpc_tablet_device_ids, + .ops = { + .add = cmpc_tablet_add, + .remove = cmpc_tablet_remove, + .resume = cmpc_tablet_resume, + .notify = cmpc_tablet_handler, + } +}; + + +/* + * Backlight code. + */ + +static acpi_status cmpc_get_brightness(acpi_handle handle, + unsigned long long *value) +{ + union acpi_object param; + struct acpi_object_list input; + unsigned long long output; + acpi_status status; + + param.type = ACPI_TYPE_INTEGER; + param.integer.value = 0xC0; + input.count = 1; + input.pointer = ¶m; + status = acpi_evaluate_integer(handle, "GRDI", &input, &output); + if (ACPI_SUCCESS(status)) + *value = output; + return status; +} + +static acpi_status cmpc_set_brightness(acpi_handle handle, + unsigned long long value) +{ + union acpi_object param[2]; + struct acpi_object_list input; + acpi_status status; + unsigned long long output; + + param[0].type = ACPI_TYPE_INTEGER; + param[0].integer.value = 0xC0; + param[1].type = ACPI_TYPE_INTEGER; + param[1].integer.value = value; + input.count = 2; + input.pointer = param; + status = acpi_evaluate_integer(handle, "GWRI", &input, &output); + return status; +} + +static int cmpc_bl_get_brightness(struct backlight_device *bd) +{ + acpi_status status; + acpi_handle handle; + unsigned long long brightness; + + handle = bl_get_data(bd); + status = cmpc_get_brightness(handle, &brightness); + if (ACPI_SUCCESS(status)) + return brightness; + else + return -1; +} + +static int cmpc_bl_update_status(struct backlight_device *bd) +{ + acpi_status status; + acpi_handle handle; + + handle = bl_get_data(bd); + status = cmpc_set_brightness(handle, bd->props.brightness); + if (ACPI_SUCCESS(status)) + return 0; + else + return -1; +} + +static struct backlight_ops cmpc_bl_ops = { + .get_brightness = cmpc_bl_get_brightness, + .update_status = cmpc_bl_update_status +}; + +static int cmpc_bl_add(struct acpi_device *acpi) +{ + struct backlight_device *bd; + + bd = backlight_device_register("cmpc_bl", &acpi->dev, + acpi->handle, &cmpc_bl_ops); + bd->props.max_brightness = 7; + dev_set_drvdata(&acpi->dev, bd); + return 0; +} + +static int cmpc_bl_remove(struct acpi_device *acpi, int type) +{ + struct backlight_device *bd; + + bd = dev_get_drvdata(&acpi->dev); + backlight_device_unregister(bd); + return 0; +} + +static const struct acpi_device_id cmpc_device_ids[] = { + {"IPML200", 0}, + {"", 0} +}; +MODULE_DEVICE_TABLE(acpi, cmpc_device_ids); + +static struct acpi_driver cmpc_bl_acpi_driver = { + .owner = THIS_MODULE, + .name = "cmpc", + .class = "cmpc", + .ids = cmpc_device_ids, + .ops = { + .add = cmpc_bl_add, + .remove = cmpc_bl_remove + } +}; + + +/* + * Extra keys code. + */ +static int cmpc_keys_codes[] = { + KEY_UNKNOWN, + KEY_WLAN, + KEY_SWITCHVIDEOMODE, + KEY_BRIGHTNESSDOWN, + KEY_BRIGHTNESSUP, + KEY_VENDOR, + KEY_MAX +}; + +static void cmpc_keys_handler(struct acpi_device *dev, u32 event) +{ + struct input_dev *inputdev; + int code = KEY_MAX; + + if ((event & 0x0F) < ARRAY_SIZE(cmpc_keys_codes)) + code = cmpc_keys_codes[event & 0x0F]; + inputdev = dev_get_drvdata(&dev->dev);; + input_report_key(inputdev, code, !(event & 0x10)); +} + +static void cmpc_keys_idev_init(struct input_dev *inputdev) +{ + int i; + + set_bit(EV_KEY, inputdev->evbit); + for (i = 0; cmpc_keys_codes[i] != KEY_MAX; i++) + set_bit(cmpc_keys_codes[i], inputdev->keybit); +} + +static int cmpc_keys_add(struct acpi_device *acpi) +{ + return cmpc_add_acpi_notify_device(acpi, "cmpc_keys", + cmpc_keys_idev_init); +} + +static int cmpc_keys_remove(struct acpi_device *acpi, int type) +{ + return cmpc_remove_acpi_notify_device(acpi); +} + +static const struct acpi_device_id cmpc_keys_device_ids[] = { + {"FnBT0000", 0}, + {"", 0} +}; +MODULE_DEVICE_TABLE(acpi, cmpc_keys_device_ids); + +static struct acpi_driver cmpc_keys_acpi_driver = { + .owner = THIS_MODULE, + .name = "cmpc_keys", + .class = "cmpc_keys", + .ids = cmpc_keys_device_ids, + .ops = { + .add = cmpc_keys_add, + .remove = cmpc_keys_remove, + .notify = cmpc_keys_handler, + } +}; + + +/* + * General init/exit code. + */ + +static int cmpc_init(void) +{ + int r; + + r = acpi_bus_register_driver(&cmpc_keys_acpi_driver); + if (r) + goto failed_keys; + + r = acpi_bus_register_driver(&cmpc_bl_acpi_driver); + if (r) + goto failed_bl; + + r = acpi_bus_register_driver(&cmpc_tablet_acpi_driver); + if (r) + goto failed_tablet; + + r = acpi_bus_register_driver(&cmpc_accel_acpi_driver); + if (r) + goto failed_accel; + + return r; + +failed_accel: + acpi_bus_unregister_driver(&cmpc_tablet_acpi_driver); + +failed_tablet: + acpi_bus_unregister_driver(&cmpc_bl_acpi_driver); + +failed_bl: + acpi_bus_unregister_driver(&cmpc_keys_acpi_driver); + +failed_keys: + return r; +} + +static void cmpc_exit(void) +{ + acpi_bus_unregister_driver(&cmpc_accel_acpi_driver); + acpi_bus_unregister_driver(&cmpc_tablet_acpi_driver); + acpi_bus_unregister_driver(&cmpc_bl_acpi_driver); + acpi_bus_unregister_driver(&cmpc_keys_acpi_driver); +} + +module_init(cmpc_init); +module_exit(cmpc_exit); diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index 67f3fe71c50..1b1dddbd574 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -202,8 +202,13 @@ static void dell_wmi_notify(u32 value, void *context) struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL }; static struct key_entry *key; union acpi_object *obj; + acpi_status status; - wmi_get_event_data(value, &response); + status = wmi_get_event_data(value, &response); + if (status != AE_OK) { + printk(KERN_INFO "dell-wmi: bad event status 0x%x\n", status); + return; + } obj = (union acpi_object *)response.pointer; @@ -238,6 +243,7 @@ static void dell_wmi_notify(u32 value, void *context) input_sync(dell_wmi_input_dev); } } + kfree(obj); } @@ -322,39 +328,37 @@ static int __init dell_wmi_input_setup(void) static int __init dell_wmi_init(void) { int err; + acpi_status status; - if (wmi_has_guid(DELL_EVENT_GUID)) { - - dmi_walk(find_hk_type, NULL); - - err = dell_wmi_input_setup(); - - if (err) - return err; + if (!wmi_has_guid(DELL_EVENT_GUID)) { + printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n"); + return -ENODEV; + } - err = wmi_install_notify_handler(DELL_EVENT_GUID, - dell_wmi_notify, NULL); - if (err) { - input_unregister_device(dell_wmi_input_dev); - printk(KERN_ERR "dell-wmi: Unable to register" - " notify handler - %d\n", err); - return err; - } + dmi_walk(find_hk_type, NULL); + acpi_video = acpi_video_backlight_support(); - acpi_video = acpi_video_backlight_support(); + err = dell_wmi_input_setup(); + if (err) + return err; - } else - printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n"); + status = wmi_install_notify_handler(DELL_EVENT_GUID, + dell_wmi_notify, NULL); + if (ACPI_FAILURE(status)) { + input_unregister_device(dell_wmi_input_dev); + printk(KERN_ERR + "dell-wmi: Unable to register notify handler - %d\n", + status); + return -ENODEV; + } return 0; } static void __exit dell_wmi_exit(void) { - if (wmi_has_guid(DELL_EVENT_GUID)) { - wmi_remove_notify_handler(DELL_EVENT_GUID); - input_unregister_device(dell_wmi_input_dev); - } + wmi_remove_notify_handler(DELL_EVENT_GUID); + input_unregister_device(dell_wmi_input_dev); } module_init(dell_wmi_init); diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index b66029bd75d..5f3320d468f 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -376,8 +376,8 @@ static int get_lcd_level(void) status = acpi_evaluate_integer(fujitsu->acpi_handle, "GBLL", NULL, &state); - if (status < 0) - return status; + if (ACPI_FAILURE(status)) + return 0; fujitsu->brightness_level = state & 0x0fffffff; @@ -398,8 +398,8 @@ static int get_max_brightness(void) status = acpi_evaluate_integer(fujitsu->acpi_handle, "RBLL", NULL, &state); - if (status < 0) - return status; + if (ACPI_FAILURE(status)) + return -1; fujitsu->max_brightness = state; diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 63c3e658a88..5b648f0c607 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -134,10 +134,15 @@ static int hp_wmi_perform_query(int query, int write, int value) obj = output.pointer; - if (!obj || obj->type != ACPI_TYPE_BUFFER) + if (!obj) return -EINVAL; + else if (obj->type != ACPI_TYPE_BUFFER) { + kfree(obj); + return -EINVAL; + } bios_return = *((struct bios_return *)obj->buffer.pointer); + kfree(obj); if (bios_return.return_code > 0) return bios_return.return_code * -1; else @@ -333,17 +338,24 @@ static void hp_wmi_notify(u32 value, void *context) static struct key_entry *key; union acpi_object *obj; int eventcode; + acpi_status status; - wmi_get_event_data(value, &response); + status = wmi_get_event_data(value, &response); + if (status != AE_OK) { + printk(KERN_INFO "hp-wmi: bad event status 0x%x\n", status); + return; + } obj = (union acpi_object *)response.pointer; if (!obj || obj->type != ACPI_TYPE_BUFFER || obj->buffer.length != 8) { printk(KERN_INFO "HP WMI: Unknown response received\n"); + kfree(obj); return; } eventcode = *((u8 *) obj->buffer.pointer); + kfree(obj); if (eventcode == 0x4) eventcode = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0, 0); @@ -381,6 +393,8 @@ static void hp_wmi_notify(u32 value, void *context) } else printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n", eventcode); + + kfree(obj); } static int __init hp_wmi_input_setup(void) @@ -572,7 +586,7 @@ static int __init hp_wmi_init(void) if (wmi_has_guid(HPWMI_EVENT_GUID)) { err = wmi_install_notify_handler(HPWMI_EVENT_GUID, hp_wmi_notify, NULL); - if (!err) + if (ACPI_SUCCESS(err)) hp_wmi_input_setup(); } diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c index 0c8fe145c4a..f5f70d4c691 100644 --- a/drivers/platform/x86/msi-wmi.c +++ b/drivers/platform/x86/msi-wmi.c @@ -34,16 +34,6 @@ MODULE_LICENSE("GPL"); MODULE_ALIAS("wmi:551A1F84-FBDD-4125-91DB-3EA8F44F1D45"); MODULE_ALIAS("wmi:B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2"); -/* Temporary workaround until the WMI sysfs interface goes in - { "svn", DMI_SYS_VENDOR }, - { "pn", DMI_PRODUCT_NAME }, - { "pvr", DMI_PRODUCT_VERSION }, - { "rvn", DMI_BOARD_VENDOR }, - { "rn", DMI_BOARD_NAME }, -*/ - -MODULE_ALIAS("dmi:*:svnMICRO-STARINTERNATIONAL*:pnMS-6638:*"); - #define DRV_NAME "msi-wmi" #define DRV_PFX DRV_NAME ": " @@ -159,8 +149,13 @@ static void msi_wmi_notify(u32 value, void *context) static struct key_entry *key; union acpi_object *obj; ktime_t cur; + acpi_status status; - wmi_get_event_data(value, &response); + status = wmi_get_event_data(value, &response); + if (status != AE_OK) { + printk(KERN_INFO DRV_PFX "bad event status 0x%x\n", status); + return; + } obj = (union acpi_object *)response.pointer; @@ -246,7 +241,7 @@ static int __init msi_wmi_init(void) } err = wmi_install_notify_handler(MSIWMI_EVENT_GUID, msi_wmi_notify, NULL); - if (err) + if (ACPI_FAILURE(err)) return -EINVAL; err = msi_wmi_input_setup(); diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 2896ca4cd9a..5af53340da6 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -131,6 +131,7 @@ enum sony_nc_rfkill { N_SONY_RFKILL, }; +static int sony_rfkill_handle; static struct rfkill *sony_rfkill_devices[N_SONY_RFKILL]; static int sony_rfkill_address[N_SONY_RFKILL] = {0x300, 0x500, 0x700, 0x900}; static void sony_nc_rfkill_update(void); @@ -232,6 +233,7 @@ static int sony_laptop_input_index[] = { 56, /* 69 SONYPI_EVENT_VOLUME_INC_PRESSED */ 57, /* 70 SONYPI_EVENT_VOLUME_DEC_PRESSED */ -1, /* 71 SONYPI_EVENT_BRIGHTNESS_PRESSED */ + 58, /* 72 SONYPI_EVENT_MEDIA_PRESSED */ }; static int sony_laptop_input_keycode_map[] = { @@ -293,6 +295,7 @@ static int sony_laptop_input_keycode_map[] = { KEY_F15, /* 55 SONYPI_EVENT_SETTINGKEY_PRESSED */ KEY_VOLUMEUP, /* 56 SONYPI_EVENT_VOLUME_INC_PRESSED */ KEY_VOLUMEDOWN, /* 57 SONYPI_EVENT_VOLUME_DEC_PRESSED */ + KEY_MEDIA, /* 58 SONYPI_EVENT_MEDIA_PRESSED */ }; /* release buttons after a short delay if pressed */ @@ -890,6 +893,8 @@ static struct sony_nc_event sony_100_events[] = { { 0x0C, SONYPI_EVENT_FNKEY_RELEASED }, { 0x9f, SONYPI_EVENT_CD_EJECT_PRESSED }, { 0x1f, SONYPI_EVENT_ANYBUTTON_RELEASED }, + { 0xa1, SONYPI_EVENT_MEDIA_PRESSED }, + { 0x21, SONYPI_EVENT_ANYBUTTON_RELEASED }, { 0, 0 }, }; @@ -961,7 +966,7 @@ static void sony_nc_notify(struct acpi_device *device, u32 event) else sony_laptop_report_input_event(ev); } - } else if (sony_find_snc_handle(0x124) == ev) { + } else if (sony_find_snc_handle(sony_rfkill_handle) == ev) { sony_nc_rfkill_update(); return; } @@ -1067,7 +1072,7 @@ static int sony_nc_rfkill_set(void *data, bool blocked) if (!blocked) argument |= 0xff0000; - return sony_call_snc_handle(0x124, argument, &result); + return sony_call_snc_handle(sony_rfkill_handle, argument, &result); } static const struct rfkill_ops sony_rfkill_ops = { @@ -1110,7 +1115,7 @@ static int sony_nc_setup_rfkill(struct acpi_device *device, if (!rfk) return -ENOMEM; - sony_call_snc_handle(0x124, 0x200, &result); + sony_call_snc_handle(sony_rfkill_handle, 0x200, &result); hwblock = !(result & 0x1); rfkill_set_hw_state(rfk, hwblock); @@ -1129,7 +1134,7 @@ static void sony_nc_rfkill_update() int result; bool hwblock; - sony_call_snc_handle(0x124, 0x200, &result); + sony_call_snc_handle(sony_rfkill_handle, 0x200, &result); hwblock = !(result & 0x1); for (i = 0; i < N_SONY_RFKILL; i++) { @@ -1145,36 +1150,79 @@ static void sony_nc_rfkill_update() continue; } - sony_call_snc_handle(0x124, argument, &result); + sony_call_snc_handle(sony_rfkill_handle, argument, &result); rfkill_set_states(sony_rfkill_devices[i], !(result & 0xf), false); } } -static int sony_nc_rfkill_setup(struct acpi_device *device) +static void sony_nc_rfkill_setup(struct acpi_device *device) { - int result, ret; + int offset; + u8 dev_code, i; + acpi_status status; + struct acpi_object_list params; + union acpi_object in_obj; + union acpi_object *device_enum; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - if (sony_find_snc_handle(0x124) == -1) - return -1; + offset = sony_find_snc_handle(0x124); + if (offset == -1) { + offset = sony_find_snc_handle(0x135); + if (offset == -1) + return; + else + sony_rfkill_handle = 0x135; + } else + sony_rfkill_handle = 0x124; + dprintk("Found rkfill handle: 0x%.4x\n", sony_rfkill_handle); - ret = sony_call_snc_handle(0x124, 0xb00, &result); - if (ret) { - printk(KERN_INFO DRV_PFX - "Unable to enumerate rfkill devices: %x\n", ret); - return ret; + /* need to read the whole buffer returned by the acpi call to SN06 + * here otherwise we may miss some features + */ + params.count = 1; + params.pointer = &in_obj; + in_obj.type = ACPI_TYPE_INTEGER; + in_obj.integer.value = offset; + status = acpi_evaluate_object(sony_nc_acpi_handle, "SN06", ¶ms, + &buffer); + if (ACPI_FAILURE(status)) { + dprintk("Radio device enumeration failed\n"); + return; + } + + device_enum = (union acpi_object *) buffer.pointer; + if (!device_enum || device_enum->type != ACPI_TYPE_BUFFER) { + printk(KERN_ERR "Invalid SN06 return object 0x%.2x\n", + device_enum->type); + goto out_no_enum; } - if (result & 0x1) - sony_nc_setup_rfkill(device, SONY_WIFI); - if (result & 0x2) - sony_nc_setup_rfkill(device, SONY_BLUETOOTH); - if (result & 0x1c) - sony_nc_setup_rfkill(device, SONY_WWAN); - if (result & 0x20) - sony_nc_setup_rfkill(device, SONY_WIMAX); + /* the buffer is filled with magic numbers describing the devices + * available, 0xff terminates the enumeration + */ + while ((dev_code = *(device_enum->buffer.pointer + i)) != 0xff && + i < device_enum->buffer.length) { + i++; + dprintk("Radio devices, looking at 0x%.2x\n", dev_code); - return 0; + if (dev_code == 0 && !sony_rfkill_devices[SONY_WIFI]) + sony_nc_setup_rfkill(device, SONY_WIFI); + + if (dev_code == 0x10 && !sony_rfkill_devices[SONY_BLUETOOTH]) + sony_nc_setup_rfkill(device, SONY_BLUETOOTH); + + if ((0xf0 & dev_code) == 0x20 && + !sony_rfkill_devices[SONY_WWAN]) + sony_nc_setup_rfkill(device, SONY_WWAN); + + if (dev_code == 0x30 && !sony_rfkill_devices[SONY_WIMAX]) + sony_nc_setup_rfkill(device, SONY_WIMAX); + } + +out_no_enum: + kfree(buffer.pointer); + return; } static int sony_nc_add(struct acpi_device *device) diff --git a/drivers/platform/x86/tc1100-wmi.c b/drivers/platform/x86/tc1100-wmi.c index 44166003d4e..dd33b51c348 100644 --- a/drivers/platform/x86/tc1100-wmi.c +++ b/drivers/platform/x86/tc1100-wmi.c @@ -47,22 +47,6 @@ MODULE_DESCRIPTION("HP Compaq TC1100 Tablet WMI Extras"); MODULE_LICENSE("GPL"); MODULE_ALIAS("wmi:C364AC71-36DB-495A-8494-B439D472A505"); -static int tc1100_probe(struct platform_device *device); -static int tc1100_remove(struct platform_device *device); -static int tc1100_suspend(struct platform_device *device, pm_message_t state); -static int tc1100_resume(struct platform_device *device); - -static struct platform_driver tc1100_driver = { - .driver = { - .name = "tc1100-wmi", - .owner = THIS_MODULE, - }, - .probe = tc1100_probe, - .remove = tc1100_remove, - .suspend = tc1100_suspend, - .resume = tc1100_resume, -}; - static struct platform_device *tc1100_device; struct tc1100_data { @@ -183,51 +167,35 @@ static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \ show_set_bool(wireless, TC1100_INSTANCE_WIRELESS); show_set_bool(jogdial, TC1100_INSTANCE_JOGDIAL); -static void remove_fs(void) -{ - device_remove_file(&tc1100_device->dev, &dev_attr_wireless); - device_remove_file(&tc1100_device->dev, &dev_attr_jogdial); -} - -static int add_fs(void) -{ - int ret; - - ret = device_create_file(&tc1100_device->dev, &dev_attr_wireless); - if (ret) - goto add_sysfs_error; - - ret = device_create_file(&tc1100_device->dev, &dev_attr_jogdial); - if (ret) - goto add_sysfs_error; - - return ret; +static struct attribute *tc1100_attributes[] = { + &dev_attr_wireless.attr, + &dev_attr_jogdial.attr, + NULL +}; -add_sysfs_error: - remove_fs(); - return ret; -} +static struct attribute_group tc1100_attribute_group = { + .attrs = tc1100_attributes, +}; /* -------------------------------------------------------------------------- Driver Model -------------------------------------------------------------------------- */ -static int tc1100_probe(struct platform_device *device) +static int __init tc1100_probe(struct platform_device *device) { - int result = 0; - - result = add_fs(); - return result; + return sysfs_create_group(&device->dev.kobj, &tc1100_attribute_group); } -static int tc1100_remove(struct platform_device *device) +static int __devexit tc1100_remove(struct platform_device *device) { - remove_fs(); + sysfs_remove_group(&device->dev.kobj, &tc1100_attribute_group); + return 0; } -static int tc1100_suspend(struct platform_device *dev, pm_message_t state) +#ifdef CONFIG_PM +static int tc1100_suspend(struct device *dev) { int ret; @@ -239,10 +207,10 @@ static int tc1100_suspend(struct platform_device *dev, pm_message_t state) if (ret) return ret; - return ret; + return 0; } -static int tc1100_resume(struct platform_device *dev) +static int tc1100_resume(struct device *dev) { int ret; @@ -254,34 +222,61 @@ static int tc1100_resume(struct platform_device *dev) if (ret) return ret; - return ret; + return 0; } +static const struct dev_pm_ops tc1100_pm_ops = { + .suspend = tc1100_suspend, + .resume = tc1100_resume, + .freeze = tc1100_suspend, + .restore = tc1100_resume, +}; +#endif + +static struct platform_driver tc1100_driver = { + .driver = { + .name = "tc1100-wmi", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &tc1100_pm_ops, +#endif + }, + .remove = __devexit_p(tc1100_remove), +}; + static int __init tc1100_init(void) { - int result = 0; + int error; if (!wmi_has_guid(GUID)) return -ENODEV; - result = platform_driver_register(&tc1100_driver); - if (result) - return result; - tc1100_device = platform_device_alloc("tc1100-wmi", -1); - platform_device_add(tc1100_device); + if (!tc1100_device) + return -ENOMEM; + + error = platform_device_add(tc1100_device); + if (error) + goto err_device_put; + + error = platform_driver_probe(&tc1100_driver, tc1100_probe); + if (error) + goto err_device_del; printk(TC1100_INFO "HP Compaq TC1100 Tablet WMI Extras loaded\n"); + return 0; - return result; + err_device_del: + platform_device_del(tc1100_device); + err_device_put: + platform_device_put(tc1100_device); + return error; } static void __exit tc1100_exit(void) { - platform_device_del(tc1100_device); + platform_device_unregister(tc1100_device); platform_driver_unregister(&tc1100_driver); - - printk(TC1100_INFO "HP Compaq TC1100 Tablet WMI Extras unloaded\n"); } module_init(tc1100_init); diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 448c8aeb166..e67e4feb35c 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -6384,11 +6384,13 @@ static struct ibm_struct brightness_driver_data = { * and we leave them unchanged. */ +#ifdef CONFIG_THINKPAD_ACPI_ALSA_SUPPORT + #define TPACPI_ALSA_DRVNAME "ThinkPad EC" #define TPACPI_ALSA_SHRTNAME "ThinkPad Console Audio Control" #define TPACPI_ALSA_MIXERNAME TPACPI_ALSA_SHRTNAME -static int alsa_index = SNDRV_DEFAULT_IDX1; +static int alsa_index = ~((1 << (SNDRV_CARDS - 3)) - 1); /* last three slots */ static char *alsa_id = "ThinkPadEC"; static int alsa_enable = SNDRV_DEFAULT_ENABLE1; @@ -6705,10 +6707,11 @@ static int __init volume_create_alsa_mixer(void) rc = snd_card_create(alsa_index, alsa_id, THIS_MODULE, sizeof(struct tpacpi_alsa_data), &card); - if (rc < 0) - return rc; - if (!card) - return -ENOMEM; + if (rc < 0 || !card) { + printk(TPACPI_ERR + "Failed to create ALSA card structures: %d\n", rc); + return 1; + } BUG_ON(!card->private_data); data = card->private_data; @@ -6741,8 +6744,9 @@ static int __init volume_create_alsa_mixer(void) rc = snd_ctl_add(card, ctl_vol); if (rc < 0) { printk(TPACPI_ERR - "Failed to create ALSA volume control\n"); - goto err_out; + "Failed to create ALSA volume control: %d\n", + rc); + goto err_exit; } data->ctl_vol_id = &ctl_vol->id; } @@ -6750,22 +6754,25 @@ static int __init volume_create_alsa_mixer(void) ctl_mute = snd_ctl_new1(&volume_alsa_control_mute, NULL); rc = snd_ctl_add(card, ctl_mute); if (rc < 0) { - printk(TPACPI_ERR "Failed to create ALSA mute control\n"); - goto err_out; + printk(TPACPI_ERR "Failed to create ALSA mute control: %d\n", + rc); + goto err_exit; } data->ctl_mute_id = &ctl_mute->id; snd_card_set_dev(card, &tpacpi_pdev->dev); rc = snd_card_register(card); - -err_out: if (rc < 0) { - snd_card_free(card); - card = NULL; + printk(TPACPI_ERR "Failed to register ALSA card: %d\n", rc); + goto err_exit; } alsa_card = card; - return rc; + return 0; + +err_exit: + snd_card_free(card); + return 1; } #define TPACPI_VOL_Q_MUTEONLY 0x0001 /* Mute-only control available */ @@ -7016,6 +7023,28 @@ static struct ibm_struct volume_driver_data = { .shutdown = volume_shutdown, }; +#else /* !CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */ + +#define alsa_card NULL + +static void inline volume_alsa_notify_change(void) +{ +} + +static int __init volume_init(struct ibm_init_struct *iibm) +{ + printk(TPACPI_INFO + "volume: disabled as there is no ALSA support in this kernel\n"); + + return 1; +} + +static struct ibm_struct volume_driver_data = { + .name = "volume", +}; + +#endif /* CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */ + /************************************************************************* * Fan subdriver */ @@ -8738,6 +8767,7 @@ MODULE_PARM_DESC(hotkey_report_mode, "used for backwards compatibility with userspace, " "see documentation"); +#ifdef CONFIG_THINKPAD_ACPI_ALSA_SUPPORT module_param_named(volume_mode, volume_mode, uint, 0444); MODULE_PARM_DESC(volume_mode, "Selects volume control strategy: " @@ -8760,6 +8790,7 @@ module_param_named(id, alsa_id, charp, 0444); MODULE_PARM_DESC(id, "ALSA id for the ACPI EC Mixer"); module_param_named(enable, alsa_enable, bool, 0444); MODULE_PARM_DESC(enable, "Enable the ALSA interface for the ACPI EC Mixer"); +#endif /* CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */ #define TPACPI_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0); \ diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 51c0a8bee41..77bf5d8f893 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -42,6 +42,7 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/backlight.h> #include <linux/platform_device.h> #include <linux/rfkill.h> @@ -357,63 +358,6 @@ static int force_fan; static int last_key_event; static int key_event_valid; -typedef struct _ProcItem { - const char *name; - char *(*read_func) (char *); - unsigned long (*write_func) (const char *, unsigned long); -} ProcItem; - -/* proc file handlers - */ - -static int -dispatch_read(char *page, char **start, off_t off, int count, int *eof, - ProcItem * item) -{ - char *p = page; - int len; - - if (off == 0) - p = item->read_func(p); - - /* ISSUE: I don't understand this code */ - len = (p - page); - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - return len; -} - -static int -dispatch_write(struct file *file, const char __user * buffer, - unsigned long count, ProcItem * item) -{ - int result; - char *tmp_buffer; - - /* Arg buffer points to userspace memory, which can't be accessed - * directly. Since we're making a copy, zero-terminate the - * destination so that sscanf can be used on it safely. - */ - tmp_buffer = kmalloc(count + 1, GFP_KERNEL); - if (!tmp_buffer) - return -ENOMEM; - - if (copy_from_user(tmp_buffer, buffer, count)) { - result = -EFAULT; - } else { - tmp_buffer[count] = 0; - result = item->write_func(tmp_buffer, count); - } - kfree(tmp_buffer); - return result; -} - static int get_lcd(struct backlight_device *bd) { u32 hci_result; @@ -426,19 +370,24 @@ static int get_lcd(struct backlight_device *bd) return -EFAULT; } -static char *read_lcd(char *p) +static int lcd_proc_show(struct seq_file *m, void *v) { int value = get_lcd(NULL); if (value >= 0) { - p += sprintf(p, "brightness: %d\n", value); - p += sprintf(p, "brightness_levels: %d\n", + seq_printf(m, "brightness: %d\n", value); + seq_printf(m, "brightness_levels: %d\n", HCI_LCD_BRIGHTNESS_LEVELS); } else { printk(MY_ERR "Error reading LCD brightness\n"); } - return p; + return 0; +} + +static int lcd_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, lcd_proc_show, NULL); } static int set_lcd(int value) @@ -458,12 +407,20 @@ static int set_lcd_status(struct backlight_device *bd) return set_lcd(bd->props.brightness); } -static unsigned long write_lcd(const char *buffer, unsigned long count) +static ssize_t lcd_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) { + char cmd[42]; + size_t len; int value; int ret; - if (sscanf(buffer, " brightness : %i", &value) == 1 && + len = min(count, sizeof(cmd) - 1); + if (copy_from_user(cmd, buf, len)) + return -EFAULT; + cmd[len] = '\0'; + + if (sscanf(cmd, " brightness : %i", &value) == 1 && value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS) { ret = set_lcd(value); if (ret == 0) @@ -474,7 +431,16 @@ static unsigned long write_lcd(const char *buffer, unsigned long count) return ret; } -static char *read_video(char *p) +static const struct file_operations lcd_proc_fops = { + .owner = THIS_MODULE, + .open = lcd_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = lcd_proc_write, +}; + +static int video_proc_show(struct seq_file *m, void *v) { u32 hci_result; u32 value; @@ -484,18 +450,25 @@ static char *read_video(char *p) int is_lcd = (value & HCI_VIDEO_OUT_LCD) ? 1 : 0; int is_crt = (value & HCI_VIDEO_OUT_CRT) ? 1 : 0; int is_tv = (value & HCI_VIDEO_OUT_TV) ? 1 : 0; - p += sprintf(p, "lcd_out: %d\n", is_lcd); - p += sprintf(p, "crt_out: %d\n", is_crt); - p += sprintf(p, "tv_out: %d\n", is_tv); + seq_printf(m, "lcd_out: %d\n", is_lcd); + seq_printf(m, "crt_out: %d\n", is_crt); + seq_printf(m, "tv_out: %d\n", is_tv); } else { printk(MY_ERR "Error reading video out status\n"); } - return p; + return 0; } -static unsigned long write_video(const char *buffer, unsigned long count) +static int video_proc_open(struct inode *inode, struct file *file) { + return single_open(file, video_proc_show, NULL); +} + +static ssize_t video_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) +{ + char *cmd, *buffer; int value; int remain = count; int lcd_out = -1; @@ -504,6 +477,17 @@ static unsigned long write_video(const char *buffer, unsigned long count) u32 hci_result; u32 video_out; + cmd = kmalloc(count + 1, GFP_KERNEL); + if (!cmd) + return -ENOMEM; + if (copy_from_user(cmd, buf, count)) { + kfree(cmd); + return -EFAULT; + } + cmd[count] = '\0'; + + buffer = cmd; + /* scan expression. Multiple expressions may be delimited with ; * * NOTE: to keep scanning simple, invalid fields are ignored @@ -523,6 +507,8 @@ static unsigned long write_video(const char *buffer, unsigned long count) while (remain && *(buffer - 1) != ';'); } + kfree(cmd); + hci_read1(HCI_VIDEO_OUT, &video_out, &hci_result); if (hci_result == HCI_SUCCESS) { unsigned int new_video_out = video_out; @@ -543,28 +529,50 @@ static unsigned long write_video(const char *buffer, unsigned long count) return count; } -static char *read_fan(char *p) +static const struct file_operations video_proc_fops = { + .owner = THIS_MODULE, + .open = video_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = video_proc_write, +}; + +static int fan_proc_show(struct seq_file *m, void *v) { u32 hci_result; u32 value; hci_read1(HCI_FAN, &value, &hci_result); if (hci_result == HCI_SUCCESS) { - p += sprintf(p, "running: %d\n", (value > 0)); - p += sprintf(p, "force_on: %d\n", force_fan); + seq_printf(m, "running: %d\n", (value > 0)); + seq_printf(m, "force_on: %d\n", force_fan); } else { printk(MY_ERR "Error reading fan status\n"); } - return p; + return 0; +} + +static int fan_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, fan_proc_show, NULL); } -static unsigned long write_fan(const char *buffer, unsigned long count) +static ssize_t fan_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) { + char cmd[42]; + size_t len; int value; u32 hci_result; - if (sscanf(buffer, " force_on : %i", &value) == 1 && + len = min(count, sizeof(cmd) - 1); + if (copy_from_user(cmd, buf, len)) + return -EFAULT; + cmd[len] = '\0'; + + if (sscanf(cmd, " force_on : %i", &value) == 1 && value >= 0 && value <= 1) { hci_write1(HCI_FAN, value, &hci_result); if (hci_result != HCI_SUCCESS) @@ -578,7 +586,16 @@ static unsigned long write_fan(const char *buffer, unsigned long count) return count; } -static char *read_keys(char *p) +static const struct file_operations fan_proc_fops = { + .owner = THIS_MODULE, + .open = fan_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = fan_proc_write, +}; + +static int keys_proc_show(struct seq_file *m, void *v) { u32 hci_result; u32 value; @@ -602,18 +619,30 @@ static char *read_keys(char *p) } } - p += sprintf(p, "hotkey_ready: %d\n", key_event_valid); - p += sprintf(p, "hotkey: 0x%04x\n", last_key_event); + seq_printf(m, "hotkey_ready: %d\n", key_event_valid); + seq_printf(m, "hotkey: 0x%04x\n", last_key_event); +end: + return 0; +} - end: - return p; +static int keys_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, keys_proc_show, NULL); } -static unsigned long write_keys(const char *buffer, unsigned long count) +static ssize_t keys_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) { + char cmd[42]; + size_t len; int value; - if (sscanf(buffer, " hotkey_ready : %i", &value) == 1 && value == 0) { + len = min(count, sizeof(cmd) - 1); + if (copy_from_user(cmd, buf, len)) + return -EFAULT; + cmd[len] = '\0'; + + if (sscanf(cmd, " hotkey_ready : %i", &value) == 1 && value == 0) { key_event_valid = 0; } else { return -EINVAL; @@ -622,52 +651,58 @@ static unsigned long write_keys(const char *buffer, unsigned long count) return count; } -static char *read_version(char *p) +static const struct file_operations keys_proc_fops = { + .owner = THIS_MODULE, + .open = keys_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = keys_proc_write, +}; + +static int version_proc_show(struct seq_file *m, void *v) { - p += sprintf(p, "driver: %s\n", TOSHIBA_ACPI_VERSION); - p += sprintf(p, "proc_interface: %d\n", - PROC_INTERFACE_VERSION); - return p; + seq_printf(m, "driver: %s\n", TOSHIBA_ACPI_VERSION); + seq_printf(m, "proc_interface: %d\n", PROC_INTERFACE_VERSION); + return 0; } +static int version_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, version_proc_show, PDE(inode)->data); +} + +static const struct file_operations version_proc_fops = { + .owner = THIS_MODULE, + .open = version_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /* proc and module init */ #define PROC_TOSHIBA "toshiba" -static ProcItem proc_items[] = { - {"lcd", read_lcd, write_lcd}, - {"video", read_video, write_video}, - {"fan", read_fan, write_fan}, - {"keys", read_keys, write_keys}, - {"version", read_version, NULL}, - {NULL} -}; - static acpi_status __init add_device(void) { - struct proc_dir_entry *proc; - ProcItem *item; - - for (item = proc_items; item->name; ++item) { - proc = create_proc_read_entry(item->name, - S_IFREG | S_IRUGO | S_IWUSR, - toshiba_proc_dir, - (read_proc_t *) dispatch_read, - item); - if (proc && item->write_func) - proc->write_proc = (write_proc_t *) dispatch_write; - } + proc_create("lcd", S_IRUGO | S_IWUSR, toshiba_proc_dir, &lcd_proc_fops); + proc_create("video", S_IRUGO | S_IWUSR, toshiba_proc_dir, &video_proc_fops); + proc_create("fan", S_IRUGO | S_IWUSR, toshiba_proc_dir, &fan_proc_fops); + proc_create("keys", S_IRUGO | S_IWUSR, toshiba_proc_dir, &keys_proc_fops); + proc_create("version", S_IRUGO, toshiba_proc_dir, &version_proc_fops); return AE_OK; } static acpi_status remove_device(void) { - ProcItem *item; - - for (item = proc_items; item->name; ++item) - remove_proc_entry(item->name, toshiba_proc_dir); + remove_proc_entry("lcd", toshiba_proc_dir); + remove_proc_entry("video", toshiba_proc_dir); + remove_proc_entry("fan", toshiba_proc_dir); + remove_proc_entry("keys", toshiba_proc_dir); + remove_proc_entry("version", toshiba_proc_dir); return AE_OK; } diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index e425a868cd3..b104302fea0 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -492,8 +492,7 @@ wmi_notify_handler handler, void *data) if (!guid || !handler) return AE_BAD_PARAMETER; - find_guid(guid, &block); - if (!block) + if (!find_guid(guid, &block)) return AE_NOT_EXIST; if (block->handler) @@ -521,8 +520,7 @@ acpi_status wmi_remove_notify_handler(const char *guid) if (!guid) return AE_BAD_PARAMETER; - find_guid(guid, &block); - if (!block) + if (!find_guid(guid, &block)) return AE_NOT_EXIST; if (!block->handler) @@ -540,8 +538,8 @@ EXPORT_SYMBOL_GPL(wmi_remove_notify_handler); /** * wmi_get_event_data - Get WMI data associated with an event * - * @event - Event to find - * &out - Buffer to hold event data + * @event: Event to find + * @out: Buffer to hold event data. out->pointer should be freed with kfree() * * Returns extra data associated with an event in WMI. */ @@ -716,6 +714,22 @@ static int wmi_class_init(void) return ret; } +static bool guid_already_parsed(const char *guid_string) +{ + struct guid_block *gblock; + struct wmi_block *wblock; + struct list_head *p; + + list_for_each(p, &wmi_blocks.list) { + wblock = list_entry(p, struct wmi_block, list); + gblock = &wblock->gblock; + + if (strncmp(gblock->guid, guid_string, 16) == 0) + return true; + } + return false; +} + /* * Parse the _WDG method for the GUID data blocks */ @@ -725,6 +739,7 @@ static __init acpi_status parse_wdg(acpi_handle handle) union acpi_object *obj; struct guid_block *gblock; struct wmi_block *wblock; + char guid_string[37]; acpi_status status; u32 i, total; @@ -747,6 +762,19 @@ static __init acpi_status parse_wdg(acpi_handle handle) memcpy(gblock, obj->buffer.pointer, obj->buffer.length); for (i = 0; i < total; i++) { + /* + Some WMI devices, like those for nVidia hooks, have a + duplicate GUID. It's not clear what we should do in this + case yet, so for now, we'll just ignore the duplicate. + Anyone who wants to add support for that device can come + up with a better workaround for the mess then. + */ + if (guid_already_parsed(gblock[i].guid) == true) { + wmi_gtoa(gblock[i].guid, guid_string); + printk(KERN_INFO PREFIX "Skipping duplicate GUID %s\n", + guid_string); + continue; + } wblock = kzalloc(sizeof(struct wmi_block), GFP_KERNEL); if (!wblock) return AE_NO_MEMORY; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 68c7f6cfd72..37f0de9dd9c 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -222,9 +222,9 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) Set SCP6MD1,0 = {01} (output) */ __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); - data = ctrl_inb(SCPDR); + data = __raw_readb(SCPDR); /* Set /RTS2 (bit6) = 0 */ - ctrl_outb(data & 0xbf, SCPDR); + __raw_writeb(data & 0xbf, SCPDR); } } #elif defined(CONFIG_CPU_SUBTYPE_SH7722) @@ -897,11 +897,21 @@ static void sci_shutdown(struct uart_port *port) static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - unsigned int status, baud, smr_val; + unsigned int status, baud, smr_val, max_baud; int t = -1; - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - if (likely(baud)) + /* + * earlyprintk comes here early on with port->uartclk set to zero. + * the clock framework is not up and running at this point so here + * we assume that 115200 is the maximum baud rate. please note that + * the baud rate is not programmed during earlyprintk - it is assumed + * that the previous boot loader has enabled required clocks and + * setup the baud rate generator hardware for us already. + */ + max_baud = port->uartclk ? port->uartclk / 16 : 115200; + + baud = uart_get_baud_rate(port, termios, old, 0, max_baud); + if (likely(baud && port->uartclk)) t = SCBRR_VALUE(baud, port->uartclk); do { diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index a32094eeb42..0efcded59ae 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -517,20 +517,20 @@ static const struct __attribute__((packed)) { static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffffe80) - return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */ + return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ if (port->mapbase == 0xa4000150) - return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ + return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xa4000140) - return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ + return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7705) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == SCIF0) - return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ + return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ if (port->mapbase == SCIF2) - return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ + return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) @@ -557,68 +557,68 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ + return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ if (port->mapbase == 0xffe80000) - return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe80000) - return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7757) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfe4b0000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; if (port->mapbase == 0xfe4c0000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; if (port->mapbase == 0xfe4d0000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; } #elif defined(CONFIG_CPU_SUBTYPE_SH7760) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfe600000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfe610000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfe620000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7343) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe20000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe30000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7366) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ + return __raw_readb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7722) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */ + return __raw_readb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */ if (port->mapbase == 0xffe10000) - return ctrl_inb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */ + return __raw_readb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */ if (port->mapbase == 0xffe20000) - return ctrl_inb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */ + return __raw_readb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */ return 1; } @@ -626,17 +626,17 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */ + return __raw_readb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */ if (port->mapbase == 0xffe10000) - return ctrl_inb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */ + return __raw_readb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */ if (port->mapbase == 0xffe20000) - return ctrl_inb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */ + return __raw_readb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */ if (port->mapbase == 0xa4e30000) - return ctrl_inb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */ + return __raw_readb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */ if (port->mapbase == 0xa4e40000) - return ctrl_inb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */ + return __raw_readb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */ if (port->mapbase == 0xa4e50000) - return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ + return __raw_readb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7724) @@ -645,9 +645,9 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->type == PORT_SCIF) - return ctrl_inw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; + return __raw_readw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; if (port->type == PORT_SCIFA) - return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; + return __raw_readw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) @@ -665,11 +665,11 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe08000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ return 1; } @@ -677,20 +677,20 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xff923000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xff924000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xff925000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7780) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ @@ -698,17 +698,17 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffea0000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffeb0000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffec0000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffed0000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffee0000) - return ctrl_inw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffef0000) - return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ @@ -718,22 +718,22 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffe8000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe8800) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe9000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe9800) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ #if defined(CONFIG_CPU_SUBTYPE_SH7201) if (port->mapbase == 0xfffeA000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeA800) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeB000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeB800) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ #endif return 1; } @@ -741,24 +741,24 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xf8400000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xf8410000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xf8420000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SHX3) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffc30000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc40000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc50000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc60000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #endif diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 093f57af32d..94eb86319ff 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -87,8 +87,6 @@ source "drivers/staging/frontier/Kconfig" source "drivers/staging/dream/Kconfig" -source "drivers/staging/dst/Kconfig" - source "drivers/staging/pohmelfs/Kconfig" source "drivers/staging/b3dfg/Kconfig" @@ -145,5 +143,7 @@ source "drivers/staging/wavelan/Kconfig" source "drivers/staging/netwave/Kconfig" +source "drivers/staging/sm7xx/Kconfig" + endif # !STAGING_EXCLUDE_BUILD endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 069864f4391..b5e67b889f6 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_RTL8192E) += rtl8192e/ obj-$(CONFIG_INPUT_MIMIO) += mimio/ obj-$(CONFIG_TRANZPORT) += frontier/ obj-$(CONFIG_DREAM) += dream/ -obj-$(CONFIG_DST) += dst/ obj-$(CONFIG_POHMELFS) += pohmelfs/ obj-$(CONFIG_B3DFG) += b3dfg/ obj-$(CONFIG_IDE_PHISON) += phison/ @@ -53,3 +52,4 @@ obj-$(CONFIG_ARLAN) += arlan/ obj-$(CONFIG_WAVELAN) += wavelan/ obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan/ obj-$(CONFIG_PCMCIA_NETWAVE) += netwave/ +obj-$(CONFIG_FB_SM7XX) += sm7xx/ diff --git a/drivers/staging/batman-adv/Kconfig b/drivers/staging/batman-adv/Kconfig index 7632f576006..1d74dabf951 100644 --- a/drivers/staging/batman-adv/Kconfig +++ b/drivers/staging/batman-adv/Kconfig @@ -4,6 +4,7 @@ config BATMAN_ADV tristate "B.A.T.M.A.N. Advanced Meshing Protocol" + depends on PROC_FS && PACKET default n ---help--- diff --git a/drivers/staging/batman-adv/send.c b/drivers/staging/batman-adv/send.c index d724798278d..eb617508cca 100644 --- a/drivers/staging/batman-adv/send.c +++ b/drivers/staging/batman-adv/send.c @@ -363,8 +363,10 @@ void add_bcast_packet_to_list(unsigned char *packet_buff, int packet_len) return; forw_packet->packet_buff = kmalloc(packet_len, GFP_ATOMIC); - if (!forw_packet->packet_buff) + if (!forw_packet->packet_buff) { + kfree(forw_packet); return; + } forw_packet->packet_len = packet_len; memcpy(forw_packet->packet_buff, packet_buff, forw_packet->packet_len); diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h index ccc5cdc008c..b559a9c2f85 100644 --- a/drivers/staging/comedi/comedi.h +++ b/drivers/staging/comedi/comedi.h @@ -451,7 +451,7 @@ #define COMEDI_CB_EOS 1 /* end of scan */ #define COMEDI_CB_EOA 2 /* end of acquisition */ -#define COMEDI_CB_BLOCK 4 /* DEPRECATED: convenient block size */ +#define COMEDI_CB_BLOCK 4 /* data has arrived: wakes up read() / write() */ #define COMEDI_CB_EOBUF 8 /* DEPRECATED: end of buffer */ #define COMEDI_CB_ERROR 16 /* card error during acquisition */ #define COMEDI_CB_OVERFLOW 32 /* buffer overflow/underflow */ diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c index 0d2c2eb23b2..bd397840dcb 100644 --- a/drivers/staging/comedi/drivers/jr3_pci.c +++ b/drivers/staging/comedi/drivers/jr3_pci.c @@ -849,8 +849,11 @@ static int jr3_pci_attach(struct comedi_device *dev, } devpriv->pci_enabled = 1; - devpriv->iobase = - ioremap(pci_resource_start(card, 0), sizeof(struct jr3_t)); + devpriv->iobase = ioremap(pci_resource_start(card, 0), + offsetof(struct jr3_t, channel[devpriv->n_channels])); + if (!devpriv->iobase) + return -ENOMEM; + result = alloc_subdevices(dev, devpriv->n_channels); if (result < 0) goto out; diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 06c02046629..9a1b559c4b0 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -1,4 +1,4 @@ -#define DRIVER_VERSION "v2.3" +#define DRIVER_VERSION "v2.4" #define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com" #define DRIVER_DESC "Stirling/ITL USB-DUX -- Bernd.Porr@f2s.com" /* @@ -81,6 +81,8 @@ sampling rate. If you sample two channels you get 4kHz and so on. * 2.1: changed PWM API * 2.2: added firmware kernel request to fix an udev problem * 2.3: corrected a bug in bulk timeouts which were far too short + * 2.4: fixed a bug which causes the driver to hang when it ran out of data. + * Thanks to Jan-Matthias Braun and Ian to spot the bug and fix it. * */ @@ -532,6 +534,7 @@ static void usbduxsub_ai_IsocIrq(struct urb *urb) } } /* tell comedi that data is there */ + s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS; comedi_event(this_usbduxsub->comedidev, s); } diff --git a/drivers/staging/dst/Kconfig b/drivers/staging/dst/Kconfig deleted file mode 100644 index 448d342ac2a..00000000000 --- a/drivers/staging/dst/Kconfig +++ /dev/null @@ -1,67 +0,0 @@ -config DST - tristate "Distributed storage" - depends on NET && CRYPTO && SYSFS && BLK_DEV - select CONNECTOR - ---help--- - DST is a network block device storage, which can be used to organize - exported storage on the remote nodes into the local block device. - - DST works on top of any network media and protocol; it is just a matter - of configuration utility to understand the correct addresses. The most - common example is TCP over IP, which allows to pass through firewalls and - create remote backup storage in a different datacenter. DST requires - single port to be enabled on the exporting node and outgoing connections - on the local node. - - DST works with in-kernel client and server, which improves performance by - eliminating unneded data copies and by not depending on the version - of the external IO components. It requires userspace configuration utility - though. - - DST uses transaction model, when each store has to be explicitly acked - from the remote node to be considered as successfully written. There - may be lots of in-flight transactions. When remote host does not ack - the transaction it will be resent predefined number of times with specified - timeouts between them. All those parameters are configurable. Transactions - are marked as failed after all resends complete unsuccessfully; having - long enough resend timeout and/or large number of resends allows not to - return error to the higher (FS usually) layer in case of short network - problems or remote node outages. In case of network RAID setup this means - that storage will not degrade until transactions are marked as failed, and - thus will not force checksum recalculation and data rebuild. In case of - connection failure DST will try to reconnect to the remote node automatically. - DST sends ping commands at idle time to detect if remote node is alive. - - Because of transactional model it is possible to use zero-copy sending - without worry of data corruption (which in turn could be detected by the - strong checksums though). - - DST may fully encrypt the data channel in case of untrusted channel and implement - strong checksum of the transferred data. It is possible to configure algorithms - and crypto keys; they should match on both sides of the network channel. - Crypto processing does not introduce noticeble performance overhead, since DST - uses configurable pool of threads to perform crypto processing. - - DST utilizes memory pool model of all its transaction allocations (it is the - only additional allocation on the client) and server allocations (bio pools, - while pages are allocated from the slab). - - At startup DST performs a simple negotiation with the export node to determine - access permissions and size of the exported storage. It can be extended if - new parameters should be autonegotiated. - - DST carries block IO flags in the protocol, which allows to transparently implement - barriers and sync/flush operations. Those flags are used in the export node where - IO against the local storage is performed, which means that sync write will be sync - on the remote node too, which in turn improves data integrity and improved resistance - to errors and data corruption during power outages or storage damages. - - Homepage: http://www.ioremap.net/projects/dst - Userspace configuration utility and the latest releases: http://www.ioremap.net/archive/dst/ - -config DST_DEBUG - bool "DST debug" - depends on DST - ---help--- - This option will enable HEAVY debugging of the DST. - Turn it on ONLY if you have to debug some really obscure problem. diff --git a/drivers/staging/dst/Makefile b/drivers/staging/dst/Makefile deleted file mode 100644 index 3a8b0cf9643..00000000000 --- a/drivers/staging/dst/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_DST) += nst.o - -nst-y := dcore.o state.o export.o thread_pool.o crypto.o trans.o diff --git a/drivers/staging/dst/crypto.c b/drivers/staging/dst/crypto.c deleted file mode 100644 index 351295c97a4..00000000000 --- a/drivers/staging/dst/crypto.c +++ /dev/null @@ -1,733 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/bio.h> -#include <linux/crypto.h> -#include <linux/dst.h> -#include <linux/kernel.h> -#include <linux/scatterlist.h> -#include <linux/slab.h> - -/* - * Tricky bastard, but IV can be more complex with time... - */ -static inline u64 dst_gen_iv(struct dst_trans *t) -{ - return t->gen; -} - -/* - * Crypto machinery: hash/cipher support for the given crypto controls. - */ -static struct crypto_hash *dst_init_hash(struct dst_crypto_ctl *ctl, u8 *key) -{ - int err; - struct crypto_hash *hash; - - hash = crypto_alloc_hash(ctl->hash_algo, 0, CRYPTO_ALG_ASYNC); - if (IS_ERR(hash)) { - err = PTR_ERR(hash); - dprintk("%s: failed to allocate hash '%s', err: %d.\n", - __func__, ctl->hash_algo, err); - goto err_out_exit; - } - - ctl->crypto_attached_size = crypto_hash_digestsize(hash); - - if (!ctl->hash_keysize) - return hash; - - err = crypto_hash_setkey(hash, key, ctl->hash_keysize); - if (err) { - dprintk("%s: failed to set key for hash '%s', err: %d.\n", - __func__, ctl->hash_algo, err); - goto err_out_free; - } - - return hash; - -err_out_free: - crypto_free_hash(hash); -err_out_exit: - return ERR_PTR(err); -} - -static struct crypto_ablkcipher *dst_init_cipher(struct dst_crypto_ctl *ctl, - u8 *key) -{ - int err = -EINVAL; - struct crypto_ablkcipher *cipher; - - if (!ctl->cipher_keysize) - goto err_out_exit; - - cipher = crypto_alloc_ablkcipher(ctl->cipher_algo, 0, 0); - if (IS_ERR(cipher)) { - err = PTR_ERR(cipher); - dprintk("%s: failed to allocate cipher '%s', err: %d.\n", - __func__, ctl->cipher_algo, err); - goto err_out_exit; - } - - crypto_ablkcipher_clear_flags(cipher, ~0); - - err = crypto_ablkcipher_setkey(cipher, key, ctl->cipher_keysize); - if (err) { - dprintk("%s: failed to set key for cipher '%s', err: %d.\n", - __func__, ctl->cipher_algo, err); - goto err_out_free; - } - - return cipher; - -err_out_free: - crypto_free_ablkcipher(cipher); -err_out_exit: - return ERR_PTR(err); -} - -/* - * Crypto engine has a pool of pages to encrypt data into before sending - * it over the network. This pool is freed/allocated here. - */ -static void dst_crypto_pages_free(struct dst_crypto_engine *e) -{ - unsigned int i; - - for (i = 0; i < e->page_num; ++i) - __free_page(e->pages[i]); - kfree(e->pages); -} - -static int dst_crypto_pages_alloc(struct dst_crypto_engine *e, int num) -{ - int i; - - e->pages = kmalloc(num * sizeof(struct page **), GFP_KERNEL); - if (!e->pages) - return -ENOMEM; - - for (i = 0; i < num; ++i) { - e->pages[i] = alloc_page(GFP_KERNEL); - if (!e->pages[i]) - goto err_out_free_pages; - } - - e->page_num = num; - return 0; - -err_out_free_pages: - while (--i >= 0) - __free_page(e->pages[i]); - - kfree(e->pages); - return -ENOMEM; -} - -/* - * Initialize crypto engine for given node. - * Setup cipher/hash, keys, pool of threads and private data. - */ -static int dst_crypto_engine_init(struct dst_crypto_engine *e, - struct dst_node *n) -{ - int err; - struct dst_crypto_ctl *ctl = &n->crypto; - - err = dst_crypto_pages_alloc(e, n->max_pages); - if (err) - goto err_out_exit; - - e->size = PAGE_SIZE; - e->data = kmalloc(e->size, GFP_KERNEL); - if (!e->data) { - err = -ENOMEM; - goto err_out_free_pages; - } - - if (ctl->hash_algo[0]) { - e->hash = dst_init_hash(ctl, n->hash_key); - if (IS_ERR(e->hash)) { - err = PTR_ERR(e->hash); - e->hash = NULL; - goto err_out_free; - } - } - - if (ctl->cipher_algo[0]) { - e->cipher = dst_init_cipher(ctl, n->cipher_key); - if (IS_ERR(e->cipher)) { - err = PTR_ERR(e->cipher); - e->cipher = NULL; - goto err_out_free_hash; - } - } - - return 0; - -err_out_free_hash: - crypto_free_hash(e->hash); -err_out_free: - kfree(e->data); -err_out_free_pages: - dst_crypto_pages_free(e); -err_out_exit: - return err; -} - -static void dst_crypto_engine_exit(struct dst_crypto_engine *e) -{ - if (e->hash) - crypto_free_hash(e->hash); - if (e->cipher) - crypto_free_ablkcipher(e->cipher); - dst_crypto_pages_free(e); - kfree(e->data); -} - -/* - * Waiting for cipher processing to be completed. - */ -struct dst_crypto_completion { - struct completion complete; - int error; -}; - -static void dst_crypto_complete(struct crypto_async_request *req, int err) -{ - struct dst_crypto_completion *c = req->data; - - if (err == -EINPROGRESS) - return; - - dprintk("%s: req: %p, err: %d.\n", __func__, req, err); - c->error = err; - complete(&c->complete); -} - -static int dst_crypto_process(struct ablkcipher_request *req, - struct scatterlist *sg_dst, struct scatterlist *sg_src, - void *iv, int enc, unsigned long timeout) -{ - struct dst_crypto_completion c; - int err; - - init_completion(&c.complete); - c.error = -EINPROGRESS; - - ablkcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, - dst_crypto_complete, &c); - - ablkcipher_request_set_crypt(req, sg_src, sg_dst, sg_src->length, iv); - - if (enc) - err = crypto_ablkcipher_encrypt(req); - else - err = crypto_ablkcipher_decrypt(req); - - switch (err) { - case -EINPROGRESS: - case -EBUSY: - err = wait_for_completion_interruptible_timeout(&c.complete, - timeout); - if (!err) - err = -ETIMEDOUT; - else - err = c.error; - break; - default: - break; - } - - return err; -} - -/* - * DST uses generic iteration approach for data crypto processing. - * Single block IO request is switched into array of scatterlists, - * which are submitted to the crypto processing iterator. - * - * Input and output iterator initialization are different, since - * in output case we can not encrypt data in-place and need a - * temporary storage, which is then being sent to the remote peer. - */ -static int dst_trans_iter_out(struct bio *bio, struct dst_crypto_engine *e, - int (*iterator) (struct dst_crypto_engine *e, - struct scatterlist *dst, - struct scatterlist *src)) -{ - struct bio_vec *bv; - int err, i; - - sg_init_table(e->src, bio->bi_vcnt); - sg_init_table(e->dst, bio->bi_vcnt); - - bio_for_each_segment(bv, bio, i) { - sg_set_page(&e->src[i], bv->bv_page, bv->bv_len, bv->bv_offset); - sg_set_page(&e->dst[i], e->pages[i], bv->bv_len, bv->bv_offset); - - err = iterator(e, &e->dst[i], &e->src[i]); - if (err) - return err; - } - - return 0; -} - -static int dst_trans_iter_in(struct bio *bio, struct dst_crypto_engine *e, - int (*iterator) (struct dst_crypto_engine *e, - struct scatterlist *dst, - struct scatterlist *src)) -{ - struct bio_vec *bv; - int err, i; - - sg_init_table(e->src, bio->bi_vcnt); - sg_init_table(e->dst, bio->bi_vcnt); - - bio_for_each_segment(bv, bio, i) { - sg_set_page(&e->src[i], bv->bv_page, bv->bv_len, bv->bv_offset); - sg_set_page(&e->dst[i], bv->bv_page, bv->bv_len, bv->bv_offset); - - err = iterator(e, &e->dst[i], &e->src[i]); - if (err) - return err; - } - - return 0; -} - -static int dst_crypt_iterator(struct dst_crypto_engine *e, - struct scatterlist *sg_dst, struct scatterlist *sg_src) -{ - struct ablkcipher_request *req = e->data; - u8 iv[32]; - - memset(iv, 0, sizeof(iv)); - - memcpy(iv, &e->iv, sizeof(e->iv)); - - return dst_crypto_process(req, sg_dst, sg_src, iv, e->enc, e->timeout); -} - -static int dst_crypt(struct dst_crypto_engine *e, struct bio *bio) -{ - struct ablkcipher_request *req = e->data; - - memset(req, 0, sizeof(struct ablkcipher_request)); - ablkcipher_request_set_tfm(req, e->cipher); - - if (e->enc) - return dst_trans_iter_out(bio, e, dst_crypt_iterator); - else - return dst_trans_iter_in(bio, e, dst_crypt_iterator); -} - -static int dst_hash_iterator(struct dst_crypto_engine *e, - struct scatterlist *sg_dst, struct scatterlist *sg_src) -{ - return crypto_hash_update(e->data, sg_src, sg_src->length); -} - -static int dst_hash(struct dst_crypto_engine *e, struct bio *bio, void *dst) -{ - struct hash_desc *desc = e->data; - int err; - - desc->tfm = e->hash; - desc->flags = 0; - - err = crypto_hash_init(desc); - if (err) - return err; - - err = dst_trans_iter_in(bio, e, dst_hash_iterator); - if (err) - return err; - - err = crypto_hash_final(desc, dst); - if (err) - return err; - - return 0; -} - -/* - * Initialize/cleanup a crypto thread. The only thing it should - * do is to allocate a pool of pages as temporary storage. - * And to setup cipher and/or hash. - */ -static void *dst_crypto_thread_init(void *data) -{ - struct dst_node *n = data; - struct dst_crypto_engine *e; - int err = -ENOMEM; - - e = kzalloc(sizeof(struct dst_crypto_engine), GFP_KERNEL); - if (!e) - goto err_out_exit; - e->src = kcalloc(2 * n->max_pages, sizeof(struct scatterlist), - GFP_KERNEL); - if (!e->src) - goto err_out_free; - - e->dst = e->src + n->max_pages; - - err = dst_crypto_engine_init(e, n); - if (err) - goto err_out_free_all; - - return e; - -err_out_free_all: - kfree(e->src); -err_out_free: - kfree(e); -err_out_exit: - return ERR_PTR(err); -} - -static void dst_crypto_thread_cleanup(void *private) -{ - struct dst_crypto_engine *e = private; - - dst_crypto_engine_exit(e); - kfree(e->src); - kfree(e); -} - -/* - * Initialize crypto engine for given node: store keys, create pool - * of threads, initialize each one. - * - * Each thread has unique ID, but 0 and 1 are reserved for receiving and - * accepting threads (if export node), so IDs could start from 2, but starting - * them from 10 allows easily understand what this thread is for. - */ -int dst_node_crypto_init(struct dst_node *n, struct dst_crypto_ctl *ctl) -{ - void *key = (ctl + 1); - int err = -ENOMEM, i; - char name[32]; - - if (ctl->hash_keysize) { - n->hash_key = kmalloc(ctl->hash_keysize, GFP_KERNEL); - if (!n->hash_key) - goto err_out_exit; - memcpy(n->hash_key, key, ctl->hash_keysize); - } - - if (ctl->cipher_keysize) { - n->cipher_key = kmalloc(ctl->cipher_keysize, GFP_KERNEL); - if (!n->cipher_key) - goto err_out_free_hash; - memcpy(n->cipher_key, key, ctl->cipher_keysize); - } - memcpy(&n->crypto, ctl, sizeof(struct dst_crypto_ctl)); - - for (i = 0; i < ctl->thread_num; ++i) { - snprintf(name, sizeof(name), "%s-crypto-%d", n->name, i); - /* Unique ids... */ - err = thread_pool_add_worker(n->pool, name, i + 10, - dst_crypto_thread_init, dst_crypto_thread_cleanup, n); - if (err) - goto err_out_free_threads; - } - - return 0; - -err_out_free_threads: - while (--i >= 0) - thread_pool_del_worker_id(n->pool, i+10); - - if (ctl->cipher_keysize) - kfree(n->cipher_key); - ctl->cipher_keysize = 0; -err_out_free_hash: - if (ctl->hash_keysize) - kfree(n->hash_key); - ctl->hash_keysize = 0; -err_out_exit: - return err; -} - -void dst_node_crypto_exit(struct dst_node *n) -{ - struct dst_crypto_ctl *ctl = &n->crypto; - - if (ctl->cipher_algo[0] || ctl->hash_algo[0]) { - kfree(n->hash_key); - kfree(n->cipher_key); - } -} - -/* - * Thrad pool setup callback. Just stores a transaction in private data. - */ -static int dst_trans_crypto_setup(void *crypto_engine, void *trans) -{ - struct dst_crypto_engine *e = crypto_engine; - - e->private = trans; - return 0; -} - -#if 0 -static void dst_dump_bio(struct bio *bio) -{ - u8 *p; - struct bio_vec *bv; - int i; - - bio_for_each_segment(bv, bio, i) { - dprintk("%s: %llu/%u: size: %u, offset: %u, data: ", - __func__, bio->bi_sector, bio->bi_size, - bv->bv_len, bv->bv_offset); - - p = kmap(bv->bv_page) + bv->bv_offset; - for (i = 0; i < bv->bv_len; ++i) - printk(KERN_DEBUG "%02x ", p[i]); - kunmap(bv->bv_page); - printk("\n"); - } -} -#endif - -/* - * Encrypt/hash data and send it to the network. - */ -static int dst_crypto_process_sending(struct dst_crypto_engine *e, - struct bio *bio, u8 *hash) -{ - int err; - - if (e->cipher) { - err = dst_crypt(e, bio); - if (err) - goto err_out_exit; - } - - if (e->hash) { - err = dst_hash(e, bio, hash); - if (err) - goto err_out_exit; - -#ifdef CONFIG_DST_DEBUG - { - unsigned int i; - - /* dst_dump_bio(bio); */ - - printk(KERN_DEBUG "%s: bio: %llu/%u, rw: %lu, hash: ", - __func__, (u64)bio->bi_sector, - bio->bi_size, bio_data_dir(bio)); - for (i = 0; i < crypto_hash_digestsize(e->hash); ++i) - printk("%02x ", hash[i]); - printk("\n"); - } -#endif - } - - return 0; - -err_out_exit: - return err; -} - -/* - * Check if received data is valid. Decipher if it is. - */ -static int dst_crypto_process_receiving(struct dst_crypto_engine *e, - struct bio *bio, u8 *hash, u8 *recv_hash) -{ - int err; - - if (e->hash) { - int mismatch; - - err = dst_hash(e, bio, hash); - if (err) - goto err_out_exit; - - mismatch = !!memcmp(recv_hash, hash, - crypto_hash_digestsize(e->hash)); -#ifdef CONFIG_DST_DEBUG - /* dst_dump_bio(bio); */ - - printk(KERN_DEBUG "%s: bio: %llu/%u, rw: %lu, hash mismatch: %d", - __func__, (u64)bio->bi_sector, bio->bi_size, - bio_data_dir(bio), mismatch); - if (mismatch) { - unsigned int i; - - printk(", recv/calc: "); - for (i = 0; i < crypto_hash_digestsize(e->hash); ++i) - printk("%02x/%02x ", recv_hash[i], hash[i]); - - } - printk("\n"); -#endif - err = -1; - if (mismatch) - goto err_out_exit; - } - - if (e->cipher) { - err = dst_crypt(e, bio); - if (err) - goto err_out_exit; - } - - return 0; - -err_out_exit: - return err; -} - -/* - * Thread pool callback to encrypt data and send it to the netowork. - */ -static int dst_trans_crypto_action(void *crypto_engine, void *schedule_data) -{ - struct dst_crypto_engine *e = crypto_engine; - struct dst_trans *t = schedule_data; - struct bio *bio = t->bio; - int err; - - dprintk("%s: t: %p, gen: %llu, cipher: %p, hash: %p.\n", - __func__, t, t->gen, e->cipher, e->hash); - - e->enc = t->enc; - e->iv = dst_gen_iv(t); - - if (bio_data_dir(bio) == WRITE) { - err = dst_crypto_process_sending(e, bio, t->cmd.hash); - if (err) - goto err_out_exit; - - if (e->hash) { - t->cmd.csize = crypto_hash_digestsize(e->hash); - t->cmd.size += t->cmd.csize; - } - - return dst_trans_send(t); - } else { - u8 *hash = e->data + e->size/2; - - err = dst_crypto_process_receiving(e, bio, hash, t->cmd.hash); - if (err) - goto err_out_exit; - - dst_trans_remove(t); - dst_trans_put(t); - } - - return 0; - -err_out_exit: - t->error = err; - dst_trans_put(t); - return err; -} - -/* - * Schedule crypto processing for given transaction. - */ -int dst_trans_crypto(struct dst_trans *t) -{ - struct dst_node *n = t->n; - int err; - - err = thread_pool_schedule(n->pool, - dst_trans_crypto_setup, dst_trans_crypto_action, - t, MAX_SCHEDULE_TIMEOUT); - if (err) - goto err_out_exit; - - return 0; - -err_out_exit: - dst_trans_put(t); - return err; -} - -/* - * Crypto machinery for the export node. - */ -static int dst_export_crypto_setup(void *crypto_engine, void *bio) -{ - struct dst_crypto_engine *e = crypto_engine; - - e->private = bio; - return 0; -} - -static int dst_export_crypto_action(void *crypto_engine, void *schedule_data) -{ - struct dst_crypto_engine *e = crypto_engine; - struct bio *bio = schedule_data; - struct dst_export_priv *p = bio->bi_private; - int err; - - dprintk("%s: e: %p, data: %p, bio: %llu/%u, dir: %lu.\n", - __func__, e, e->data, (u64)bio->bi_sector, - bio->bi_size, bio_data_dir(bio)); - - e->enc = (bio_data_dir(bio) == READ); - e->iv = p->cmd.id; - - if (bio_data_dir(bio) == WRITE) { - u8 *hash = e->data + e->size/2; - - err = dst_crypto_process_receiving(e, bio, hash, p->cmd.hash); - if (err) - goto err_out_exit; - - generic_make_request(bio); - } else { - err = dst_crypto_process_sending(e, bio, p->cmd.hash); - if (err) - goto err_out_exit; - - if (e->hash) { - p->cmd.csize = crypto_hash_digestsize(e->hash); - p->cmd.size += p->cmd.csize; - } - - err = dst_export_send_bio(bio); - } - return 0; - -err_out_exit: - bio_put(bio); - return err; -} - -int dst_export_crypto(struct dst_node *n, struct bio *bio) -{ - int err; - - err = thread_pool_schedule(n->pool, - dst_export_crypto_setup, dst_export_crypto_action, - bio, MAX_SCHEDULE_TIMEOUT); - if (err) - goto err_out_exit; - - return 0; - -err_out_exit: - bio_put(bio); - return err; -} diff --git a/drivers/staging/dst/dcore.c b/drivers/staging/dst/dcore.c deleted file mode 100644 index c83ca7e3d04..00000000000 --- a/drivers/staging/dst/dcore.c +++ /dev/null @@ -1,968 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/blkdev.h> -#include <linux/bio.h> -#include <linux/buffer_head.h> -#include <linux/connector.h> -#include <linux/dst.h> -#include <linux/device.h> -#include <linux/jhash.h> -#include <linux/idr.h> -#include <linux/init.h> -#include <linux/namei.h> -#include <linux/slab.h> -#include <linux/socket.h> - -#include <linux/in.h> -#include <linux/in6.h> - -#include <net/sock.h> - -static int dst_major; - -static DEFINE_MUTEX(dst_hash_lock); -static struct list_head *dst_hashtable; -static unsigned int dst_hashtable_size = 128; -module_param(dst_hashtable_size, uint, 0644); - -static char dst_name[] = "Dementianting goldfish"; - -static DEFINE_IDR(dst_index_idr); -static struct cb_id cn_dst_id = { CN_DST_IDX, CN_DST_VAL }; - -/* - * DST sysfs tree for device called 'storage': - * - * /sys/bus/dst/devices/storage/ - * /sys/bus/dst/devices/storage/type : 192.168.4.80:1025 - * /sys/bus/dst/devices/storage/size : 800 - * /sys/bus/dst/devices/storage/name : storage - */ - -static int dst_dev_match(struct device *dev, struct device_driver *drv) -{ - return 1; -} - -static struct bus_type dst_dev_bus_type = { - .name = "dst", - .match = &dst_dev_match, -}; - -static void dst_node_release(struct device *dev) -{ - struct dst_info *info = container_of(dev, struct dst_info, device); - - kfree(info); -} - -static struct device dst_node_dev = { - .bus = &dst_dev_bus_type, - .release = &dst_node_release -}; - -/* - * Setting size of the node after it was changed. - */ -static void dst_node_set_size(struct dst_node *n) -{ - struct block_device *bdev; - - set_capacity(n->disk, n->size >> 9); - - bdev = bdget_disk(n->disk, 0); - if (bdev) { - mutex_lock(&bdev->bd_inode->i_mutex); - i_size_write(bdev->bd_inode, n->size); - mutex_unlock(&bdev->bd_inode->i_mutex); - bdput(bdev); - } -} - -/* - * Distributed storage request processing function. - */ -static int dst_request(struct request_queue *q, struct bio *bio) -{ - struct dst_node *n = q->queuedata; - int err = -EIO; - - if (bio_empty_barrier(bio) && !blk_queue_discard(q)) { - /* - * This is a dirty^Wnice hack, but if we complete this - * operation with -EOPNOTSUPP like intended, XFS - * will stuck and freeze the machine. This may be - * not particulary XFS problem though, but it is the - * only FS which sends empty barrier at umount time - * I worked with. - * - * Empty barriers are not allowed anyway, see 51fd77bd9f512 - * for example, although later it was changed to - * bio_rw_flagged(bio, BIO_RW_DISCARD) only, which does not - * work in this case. - */ - /* err = -EOPNOTSUPP; */ - err = 0; - goto end_io; - } - - bio_get(bio); - - return dst_process_bio(n, bio); - -end_io: - bio_endio(bio, err); - return err; -} - -/* - * Open/close callbacks for appropriate block device. - */ -static int dst_bdev_open(struct block_device *bdev, fmode_t mode) -{ - struct dst_node *n = bdev->bd_disk->private_data; - - dst_node_get(n); - return 0; -} - -static int dst_bdev_release(struct gendisk *disk, fmode_t mode) -{ - struct dst_node *n = disk->private_data; - - dst_node_put(n); - return 0; -} - -static struct block_device_operations dst_blk_ops = { - .open = dst_bdev_open, - .release = dst_bdev_release, - .owner = THIS_MODULE, -}; - -/* - * Block layer binding - disk is created when array is fully configured - * by userspace request. - */ -static int dst_node_create_disk(struct dst_node *n) -{ - int err = -ENOMEM; - u32 index = 0; - - n->queue = blk_init_queue(NULL, NULL); - if (!n->queue) - goto err_out_exit; - - n->queue->queuedata = n; - blk_queue_make_request(n->queue, dst_request); - blk_queue_max_phys_segments(n->queue, n->max_pages); - blk_queue_max_hw_segments(n->queue, n->max_pages); - - err = -ENOMEM; - n->disk = alloc_disk(1); - if (!n->disk) - goto err_out_free_queue; - - if (!(n->state->permissions & DST_PERM_WRITE)) { - printk(KERN_INFO "DST node %s attached read-only.\n", n->name); - set_disk_ro(n->disk, 1); - } - - if (!idr_pre_get(&dst_index_idr, GFP_KERNEL)) - goto err_out_put; - - mutex_lock(&dst_hash_lock); - err = idr_get_new(&dst_index_idr, NULL, &index); - mutex_unlock(&dst_hash_lock); - if (err) - goto err_out_put; - - n->disk->major = dst_major; - n->disk->first_minor = index; - n->disk->fops = &dst_blk_ops; - n->disk->queue = n->queue; - n->disk->private_data = n; - snprintf(n->disk->disk_name, sizeof(n->disk->disk_name), - "dst-%s", n->name); - - return 0; - -err_out_put: - put_disk(n->disk); -err_out_free_queue: - blk_cleanup_queue(n->queue); -err_out_exit: - return err; -} - -/* - * Sysfs machinery: show device's size. - */ -static ssize_t dst_show_size(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dst_info *info = container_of(dev, struct dst_info, device); - - return sprintf(buf, "%llu\n", info->size); -} - -/* - * Show local exported device. - */ -static ssize_t dst_show_local(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dst_info *info = container_of(dev, struct dst_info, device); - - return sprintf(buf, "%s\n", info->local); -} - -/* - * Shows type of the remote node - device major/minor number - * for local nodes and address (af_inet ipv4/ipv6 only) for remote nodes. - */ -static ssize_t dst_show_type(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dst_info *info = container_of(dev, struct dst_info, device); - int family = info->net.addr.sa_family; - - if (family == AF_INET) { - struct sockaddr_in *sin = (struct sockaddr_in *)&info->net.addr; - return sprintf(buf, "%u.%u.%u.%u:%d\n", - NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port)); - } else if (family == AF_INET6) { - struct sockaddr_in6 *sin = (struct sockaddr_in6 *) - &info->net.addr; - return sprintf(buf, - "%pi6:%d\n", - &sin->sin6_addr, ntohs(sin->sin6_port)); - } else { - int i, sz = PAGE_SIZE - 2; /* 0 symbol and '\n' below */ - int size, addrlen = info->net.addr.sa_data_len; - unsigned char *a = (unsigned char *)&info->net.addr.sa_data; - char *buf_orig = buf; - - size = snprintf(buf, sz, "family: %d, addrlen: %u, addr: ", - family, addrlen); - sz -= size; - buf += size; - - for (i = 0; i < addrlen; ++i) { - if (sz < 3) - break; - - size = snprintf(buf, sz, "%02x ", a[i]); - sz -= size; - buf += size; - } - buf += sprintf(buf, "\n"); - - return buf - buf_orig; - } - return 0; -} - -static struct device_attribute dst_node_attrs[] = { - __ATTR(size, 0444, dst_show_size, NULL), - __ATTR(type, 0444, dst_show_type, NULL), - __ATTR(local, 0444, dst_show_local, NULL), -}; - -static int dst_create_node_attributes(struct dst_node *n) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(dst_node_attrs); ++i) { - err = device_create_file(&n->info->device, - &dst_node_attrs[i]); - if (err) - goto err_out_remove_all; - } - return 0; - -err_out_remove_all: - while (--i >= 0) - device_remove_file(&n->info->device, - &dst_node_attrs[i]); - - return err; -} - -static void dst_remove_node_attributes(struct dst_node *n) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(dst_node_attrs); ++i) - device_remove_file(&n->info->device, - &dst_node_attrs[i]); -} - -/* - * Sysfs cleanup and initialization. - * Shows number of useful parameters. - */ -static void dst_node_sysfs_exit(struct dst_node *n) -{ - if (n->info) { - dst_remove_node_attributes(n); - device_unregister(&n->info->device); - n->info = NULL; - } -} - -static int dst_node_sysfs_init(struct dst_node *n) -{ - int err; - - n->info = kzalloc(sizeof(struct dst_info), GFP_KERNEL); - if (!n->info) - return -ENOMEM; - - memcpy(&n->info->device, &dst_node_dev, sizeof(struct device)); - n->info->size = n->size; - - dev_set_name(&n->info->device, "dst-%s", n->name); - err = device_register(&n->info->device); - if (err) { - dprintk(KERN_ERR "Failed to register node '%s', err: %d.\n", - n->name, err); - goto err_out_exit; - } - - dst_create_node_attributes(n); - - return 0; - -err_out_exit: - kfree(n->info); - n->info = NULL; - return err; -} - -/* - * DST node hash tables machinery. - */ -static inline unsigned int dst_hash(char *str, unsigned int size) -{ - return jhash(str, size, 0) % dst_hashtable_size; -} - -static void dst_node_remove(struct dst_node *n) -{ - mutex_lock(&dst_hash_lock); - list_del_init(&n->node_entry); - mutex_unlock(&dst_hash_lock); -} - -static void dst_node_add(struct dst_node *n) -{ - unsigned hash = dst_hash(n->name, sizeof(n->name)); - - mutex_lock(&dst_hash_lock); - list_add_tail(&n->node_entry, &dst_hashtable[hash]); - mutex_unlock(&dst_hash_lock); -} - -/* - * Cleaning node when it is about to be freed. - * There are still users of the socket though, - * so connection cleanup should be protected. - */ -static void dst_node_cleanup(struct dst_node *n) -{ - struct dst_state *st = n->state; - - if (!st) - return; - - if (n->queue) { - blk_cleanup_queue(n->queue); - - mutex_lock(&dst_hash_lock); - idr_remove(&dst_index_idr, n->disk->first_minor); - mutex_unlock(&dst_hash_lock); - - put_disk(n->disk); - } - - if (n->bdev) { - sync_blockdev(n->bdev); - close_bdev_exclusive(n->bdev, FMODE_READ|FMODE_WRITE); - } - - dst_state_lock(st); - st->need_exit = 1; - dst_state_exit_connected(st); - dst_state_unlock(st); - - wake_up(&st->thread_wait); - - dst_state_put(st); - n->state = NULL; -} - -/* - * Free security attributes attached to given node. - */ -static void dst_security_exit(struct dst_node *n) -{ - struct dst_secure *s, *tmp; - - list_for_each_entry_safe(s, tmp, &n->security_list, sec_entry) { - list_del(&s->sec_entry); - kfree(s); - } -} - -/* - * Free node when there are no more users. - * Actually node has to be freed on behalf od userspace process, - * since there are number of threads, which are embedded in the - * node, so they can not exit and free node from there, that is - * why there is a wakeup if reference counter is not equal to zero. - */ -void dst_node_put(struct dst_node *n) -{ - if (unlikely(!n)) - return; - - dprintk("%s: n: %p, refcnt: %d.\n", - __func__, n, atomic_read(&n->refcnt)); - - if (atomic_dec_and_test(&n->refcnt)) { - dst_node_remove(n); - n->trans_scan_timeout = 0; - dst_node_cleanup(n); - thread_pool_destroy(n->pool); - dst_node_sysfs_exit(n); - dst_node_crypto_exit(n); - dst_security_exit(n); - dst_node_trans_exit(n); - - kfree(n); - - dprintk("%s: freed n: %p.\n", __func__, n); - } else { - wake_up(&n->wait); - } -} - -/* - * Setting up export device: lookup by the name, get its size - * and setup listening socket, which will accept clients, which - * will submit IO for given storage. - */ -static int dst_setup_export(struct dst_node *n, struct dst_ctl *ctl, - struct dst_export_ctl *le) -{ - int err; - - snprintf(n->info->local, sizeof(n->info->local), "%s", le->device); - - n->bdev = open_bdev_exclusive(le->device, FMODE_READ|FMODE_WRITE, NULL); - if (IS_ERR(n->bdev)) - return PTR_ERR(n->bdev); - - if (n->size != 0) - n->size = min_t(loff_t, n->bdev->bd_inode->i_size, n->size); - else - n->size = n->bdev->bd_inode->i_size; - - n->info->size = n->size; - err = dst_node_init_listened(n, le); - if (err) - goto err_out_cleanup; - - return 0; - -err_out_cleanup: - close_bdev_exclusive(n->bdev, FMODE_READ|FMODE_WRITE); - n->bdev = NULL; - - return err; -} - -/* Empty thread pool callbacks for the network processing threads. */ -static inline void *dst_thread_network_init(void *data) -{ - dprintk("%s: data: %p.\n", __func__, data); - return data; -} - -static inline void dst_thread_network_cleanup(void *data) -{ - dprintk("%s: data: %p.\n", __func__, data); -} - -/* - * Allocate DST node and initialize some of its parameters. - */ -static struct dst_node *dst_alloc_node(struct dst_ctl *ctl, - int (*start)(struct dst_node *), - int num) -{ - struct dst_node *n; - int err; - - n = kzalloc(sizeof(struct dst_node), GFP_KERNEL); - if (!n) - return NULL; - - INIT_LIST_HEAD(&n->node_entry); - - INIT_LIST_HEAD(&n->security_list); - mutex_init(&n->security_lock); - - init_waitqueue_head(&n->wait); - - n->trans_scan_timeout = msecs_to_jiffies(ctl->trans_scan_timeout); - if (!n->trans_scan_timeout) - n->trans_scan_timeout = HZ; - - n->trans_max_retries = ctl->trans_max_retries; - if (!n->trans_max_retries) - n->trans_max_retries = 10; - - /* - * Pretty much arbitrary default numbers. - * 32 matches maximum number of pages in bio originated from ext3 (31). - */ - n->max_pages = ctl->max_pages; - if (!n->max_pages) - n->max_pages = 32; - - if (n->max_pages > 1024) - n->max_pages = 1024; - - n->start = start; - n->size = ctl->size; - - atomic_set(&n->refcnt, 1); - atomic_long_set(&n->gen, 0); - snprintf(n->name, sizeof(n->name), "%s", ctl->name); - - err = dst_node_sysfs_init(n); - if (err) - goto err_out_free; - - n->pool = thread_pool_create(num, n->name, dst_thread_network_init, - dst_thread_network_cleanup, n); - if (IS_ERR(n->pool)) { - err = PTR_ERR(n->pool); - goto err_out_sysfs_exit; - } - - dprintk("%s: n: %p, name: %s.\n", __func__, n, n->name); - - return n; - -err_out_sysfs_exit: - dst_node_sysfs_exit(n); -err_out_free: - kfree(n); - return NULL; -} - -/* - * Starting a node, connected to the remote server: - * register block device and initialize transaction mechanism. - * In revers order though. - * - * It will autonegotiate some parameters with the remote node - * and update local if needed. - * - * Transaction initialization should be the last thing before - * starting the node, since transaction should include not only - * block IO, but also crypto related data (if any), which are - * initialized separately. - */ -static int dst_start_remote(struct dst_node *n) -{ - int err; - - err = dst_node_trans_init(n, sizeof(struct dst_trans)); - if (err) - return err; - - err = dst_node_create_disk(n); - if (err) - return err; - - dst_node_set_size(n); - add_disk(n->disk); - - dprintk("DST: started remote node '%s', minor: %d.\n", - n->name, n->disk->first_minor); - - return 0; -} - -/* - * Adding remote node and initialize connection. - */ -static int dst_add_remote(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - int err; - struct dst_network_ctl *rctl = data; - - if (n) - return -EEXIST; - - if (size != sizeof(struct dst_network_ctl)) - return -EINVAL; - - n = dst_alloc_node(ctl, dst_start_remote, 1); - if (!n) - return -ENOMEM; - - memcpy(&n->info->net, rctl, sizeof(struct dst_network_ctl)); - err = dst_node_init_connected(n, rctl); - if (err) - goto err_out_free; - - dst_node_add(n); - - return 0; - -err_out_free: - dst_node_put(n); - return err; -} - -/* - * Adding export node: initializing block device and listening socket. - */ -static int dst_add_export(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - int err; - struct dst_export_ctl *le = data; - - if (n) - return -EEXIST; - - if (size != sizeof(struct dst_export_ctl)) - return -EINVAL; - - n = dst_alloc_node(ctl, dst_start_export, 2); - if (!n) - return -EINVAL; - - err = dst_setup_export(n, ctl, le); - if (err) - goto err_out_free; - - dst_node_add(n); - - return 0; - -err_out_free: - dst_node_put(n); - return err; -} - -static int dst_node_remove_unload(struct dst_node *n) -{ - printk(KERN_INFO "STOPPED name: '%s', size: %llu.\n", - n->name, n->size); - - if (n->disk) - del_gendisk(n->disk); - - dst_node_remove(n); - dst_node_sysfs_exit(n); - - /* - * This is not a hack. Really. - * Node's reference counter allows to implement fine grained - * node freeing, but since all transactions (which hold node's - * reference counter) are processed in the dedicated thread, - * it is possible that reference will hit zero in that thread, - * so we will not be able to exit thread and cleanup the node. - * - * So, we remove disk, so no new activity is possible, and - * wait until all pending transaction are completed (either - * in receiving thread or by timeout in workqueue), in this - * case reference counter will be less or equal to 2 (once set in - * dst_alloc_node() and then in connector message parser; - * or when we force module unloading, and connector message - * parser does not hold a reference, in this case reference - * counter will be equal to 1), - * and subsequent dst_node_put() calls will free the node. - */ - dprintk("%s: going to sleep with %d refcnt.\n", - __func__, atomic_read(&n->refcnt)); - wait_event(n->wait, atomic_read(&n->refcnt) <= 2); - - dst_node_put(n); - return 0; -} - -/* - * Remove node from the hash table. - */ -static int dst_del_node(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - if (!n) - return -ENODEV; - - return dst_node_remove_unload(n); -} - -/* - * Initialize crypto processing for given node. - */ -static int dst_crypto_init(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - struct dst_crypto_ctl *crypto = data; - - if (!n) - return -ENODEV; - - if (size != sizeof(struct dst_crypto_ctl) + crypto->hash_keysize + - crypto->cipher_keysize) - return -EINVAL; - - if (n->trans_cache) - return -EEXIST; - - return dst_node_crypto_init(n, crypto); -} - -/* - * Security attributes for given node. - */ -static int dst_security_init(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - struct dst_secure *s; - - if (!n) - return -ENODEV; - - if (size != sizeof(struct dst_secure_user)) - return -EINVAL; - - s = kmalloc(sizeof(struct dst_secure), GFP_KERNEL); - if (!s) - return -ENOMEM; - - memcpy(&s->sec, data, size); - - mutex_lock(&n->security_lock); - list_add_tail(&s->sec_entry, &n->security_list); - mutex_unlock(&n->security_lock); - - return 0; -} - -/* - * Kill'em all! - */ -static int dst_start_node(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - int err; - - if (!n) - return -ENODEV; - - if (n->trans_cache) - return 0; - - err = n->start(n); - if (err) - return err; - - printk(KERN_INFO "STARTED name: '%s', size: %llu.\n", n->name, n->size); - return 0; -} - -typedef int (*dst_command_func)(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size); - -/* - * List of userspace commands. - */ -static dst_command_func dst_commands[] = { - [DST_ADD_REMOTE] = &dst_add_remote, - [DST_ADD_EXPORT] = &dst_add_export, - [DST_DEL_NODE] = &dst_del_node, - [DST_CRYPTO] = &dst_crypto_init, - [DST_SECURITY] = &dst_security_init, - [DST_START] = &dst_start_node, -}; - -/* - * Configuration parser. - */ -static void cn_dst_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp) -{ - struct dst_ctl *ctl; - int err; - struct dst_ctl_ack ack; - struct dst_node *n = NULL, *tmp; - unsigned int hash; - - if (!cap_raised(nsp->eff_cap, CAP_SYS_ADMIN)) { - err = -EPERM; - goto out; - } - - if (msg->len < sizeof(struct dst_ctl)) { - err = -EBADMSG; - goto out; - } - - ctl = (struct dst_ctl *)msg->data; - - if (ctl->cmd >= DST_CMD_MAX) { - err = -EINVAL; - goto out; - } - hash = dst_hash(ctl->name, sizeof(ctl->name)); - - mutex_lock(&dst_hash_lock); - list_for_each_entry(tmp, &dst_hashtable[hash], node_entry) { - if (!memcmp(tmp->name, ctl->name, sizeof(tmp->name))) { - n = tmp; - dst_node_get(n); - break; - } - } - mutex_unlock(&dst_hash_lock); - - err = dst_commands[ctl->cmd](n, ctl, msg->data + sizeof(struct dst_ctl), - msg->len - sizeof(struct dst_ctl)); - - dst_node_put(n); -out: - memcpy(&ack.msg, msg, sizeof(struct cn_msg)); - - ack.msg.ack = msg->ack + 1; - ack.msg.len = sizeof(struct dst_ctl_ack) - sizeof(struct cn_msg); - - ack.error = err; - - cn_netlink_send(&ack.msg, 0, GFP_KERNEL); -} - -/* - * Global initialization: sysfs, hash table, block device registration, - * connector and various caches. - */ -static int __init dst_sysfs_init(void) -{ - return bus_register(&dst_dev_bus_type); -} - -static void dst_sysfs_exit(void) -{ - bus_unregister(&dst_dev_bus_type); -} - -static int __init dst_hashtable_init(void) -{ - unsigned int i; - - dst_hashtable = kcalloc(dst_hashtable_size, sizeof(struct list_head), - GFP_KERNEL); - if (!dst_hashtable) - return -ENOMEM; - - for (i = 0; i < dst_hashtable_size; ++i) - INIT_LIST_HEAD(&dst_hashtable[i]); - - return 0; -} - -static void dst_hashtable_exit(void) -{ - unsigned int i; - struct dst_node *n, *tmp; - - for (i = 0; i < dst_hashtable_size; ++i) { - list_for_each_entry_safe(n, tmp, &dst_hashtable[i], node_entry) { - dst_node_remove_unload(n); - } - } - - kfree(dst_hashtable); -} - -static int __init dst_sys_init(void) -{ - int err = -ENOMEM; - - err = dst_hashtable_init(); - if (err) - goto err_out_exit; - - err = dst_export_init(); - if (err) - goto err_out_hashtable_exit; - - err = register_blkdev(dst_major, DST_NAME); - if (err < 0) - goto err_out_export_exit; - if (err) - dst_major = err; - - err = dst_sysfs_init(); - if (err) - goto err_out_unregister; - - err = cn_add_callback(&cn_dst_id, "DST", cn_dst_callback); - if (err) - goto err_out_sysfs_exit; - - printk(KERN_INFO "Distributed storage, '%s' release.\n", dst_name); - - return 0; - -err_out_sysfs_exit: - dst_sysfs_exit(); -err_out_unregister: - unregister_blkdev(dst_major, DST_NAME); -err_out_export_exit: - dst_export_exit(); -err_out_hashtable_exit: - dst_hashtable_exit(); -err_out_exit: - return err; -} - -static void __exit dst_sys_exit(void) -{ - cn_del_callback(&cn_dst_id); - unregister_blkdev(dst_major, DST_NAME); - dst_hashtable_exit(); - dst_sysfs_exit(); - dst_export_exit(); -} - -module_init(dst_sys_init); -module_exit(dst_sys_exit); - -MODULE_DESCRIPTION("Distributed storage"); -MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/dst/export.c b/drivers/staging/dst/export.c deleted file mode 100644 index c324230e8b6..00000000000 --- a/drivers/staging/dst/export.c +++ /dev/null @@ -1,660 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/blkdev.h> -#include <linux/bio.h> -#include <linux/dst.h> -#include <linux/in.h> -#include <linux/in6.h> -#include <linux/poll.h> -#include <linux/slab.h> -#include <linux/socket.h> - -#include <net/sock.h> - -/* - * Export bioset is used for server block IO requests. - */ -static struct bio_set *dst_bio_set; - -int __init dst_export_init(void) -{ - int err = -ENOMEM; - - dst_bio_set = bioset_create(32, sizeof(struct dst_export_priv)); - if (!dst_bio_set) - goto err_out_exit; - - return 0; - -err_out_exit: - return err; -} - -void dst_export_exit(void) -{ - bioset_free(dst_bio_set); -} - -/* - * When client connects and autonegotiates with the server node, - * its permissions are checked in a security attributes and sent - * back. - */ -static unsigned int dst_check_permissions(struct dst_state *main, - struct dst_state *st) -{ - struct dst_node *n = main->node; - struct dst_secure *sentry; - struct dst_secure_user *s; - struct saddr *sa = &st->ctl.addr; - unsigned int perm = 0; - - mutex_lock(&n->security_lock); - list_for_each_entry(sentry, &n->security_list, sec_entry) { - s = &sentry->sec; - - if (s->addr.sa_family != sa->sa_family) - continue; - - if (s->addr.sa_data_len != sa->sa_data_len) - continue; - - /* - * This '2' below is a port field. This may be very wrong to do - * in atalk for example though. If there will be any need - * to extent protocol to something else, I can create - * per-family helpers and use them instead of this memcmp. - */ - if (memcmp(s->addr.sa_data + 2, sa->sa_data + 2, - sa->sa_data_len - 2)) - continue; - - perm = s->permissions; - } - mutex_unlock(&n->security_lock); - - return perm; -} - -/* - * Accept new client: allocate appropriate network state and check permissions. - */ -static struct dst_state *dst_accept_client(struct dst_state *st) -{ - unsigned int revents = 0; - unsigned int err_mask = POLLERR | POLLHUP | POLLRDHUP; - unsigned int mask = err_mask | POLLIN; - struct dst_node *n = st->node; - int err = 0; - struct socket *sock = NULL; - struct dst_state *new; - - while (!err && !sock) { - revents = dst_state_poll(st); - - if (!(revents & mask)) { - DEFINE_WAIT(wait); - - for (;;) { - prepare_to_wait(&st->thread_wait, - &wait, TASK_INTERRUPTIBLE); - if (!n->trans_scan_timeout || st->need_exit) - break; - - revents = dst_state_poll(st); - - if (revents & mask) - break; - - if (signal_pending(current)) - break; - - /* - * Magic HZ? Polling check above is not safe in - * all cases (like socket reset in BH context), - * so it is simpler just to postpone it to the - * process context instead of implementing - * special locking there. - */ - schedule_timeout(HZ); - } - finish_wait(&st->thread_wait, &wait); - } - - err = -ECONNRESET; - dst_state_lock(st); - - dprintk("%s: st: %p, revents: %x [err: %d, in: %d].\n", - __func__, st, revents, revents & err_mask, - revents & POLLIN); - - if (revents & err_mask) { - dprintk("%s: revents: %x, socket: %p, err: %d.\n", - __func__, revents, st->socket, err); - err = -ECONNRESET; - } - - if (!n->trans_scan_timeout || st->need_exit) - err = -ENODEV; - - if (st->socket && (revents & POLLIN)) - err = kernel_accept(st->socket, &sock, 0); - - dst_state_unlock(st); - } - - if (err) - goto err_out_exit; - - new = dst_state_alloc(st->node); - if (IS_ERR(new)) { - err = -ENOMEM; - goto err_out_release; - } - new->socket = sock; - - new->ctl.addr.sa_data_len = sizeof(struct sockaddr); - err = kernel_getpeername(sock, (struct sockaddr *)&new->ctl.addr, - (int *)&new->ctl.addr.sa_data_len); - if (err) - goto err_out_put; - - new->permissions = dst_check_permissions(st, new); - if (new->permissions == 0) { - err = -EPERM; - dst_dump_addr(sock, (struct sockaddr *)&new->ctl.addr, - "Client is not allowed to connect"); - goto err_out_put; - } - - err = dst_poll_init(new); - if (err) - goto err_out_put; - - dst_dump_addr(sock, (struct sockaddr *)&new->ctl.addr, - "Connected client"); - - return new; - -err_out_put: - dst_state_put(new); -err_out_release: - sock_release(sock); -err_out_exit: - return ERR_PTR(err); -} - -/* - * Each server's block request sometime finishes. - * Usually it happens in hard irq context of the appropriate controller, - * so to play good with all cases we just queue BIO into the queue - * and wake up processing thread, which gets completed request and - * send (encrypting if needed) it back to the client (if it was a read - * request), or sends back reply that writing successfully completed. - */ -static int dst_export_process_request_queue(struct dst_state *st) -{ - unsigned long flags; - struct dst_export_priv *p = NULL; - struct bio *bio; - int err = 0; - - while (!list_empty(&st->request_list)) { - spin_lock_irqsave(&st->request_lock, flags); - if (!list_empty(&st->request_list)) { - p = list_first_entry(&st->request_list, - struct dst_export_priv, request_entry); - list_del(&p->request_entry); - } - spin_unlock_irqrestore(&st->request_lock, flags); - - if (!p) - break; - - bio = p->bio; - - if (dst_need_crypto(st->node) && (bio_data_dir(bio) == READ)) - err = dst_export_crypto(st->node, bio); - else - err = dst_export_send_bio(bio); - - if (err) - break; - } - - return err; -} - -/* - * Cleanup export state. - * It has to wait until all requests are finished, - * and then free them all. - */ -static void dst_state_cleanup_export(struct dst_state *st) -{ - struct dst_export_priv *p; - unsigned long flags; - - /* - * This loop waits for all pending bios to be completed and freed. - */ - while (atomic_read(&st->refcnt) > 1) { - dprintk("%s: st: %p, refcnt: %d, list_empty: %d.\n", - __func__, st, atomic_read(&st->refcnt), - list_empty(&st->request_list)); - wait_event_timeout(st->thread_wait, - (atomic_read(&st->refcnt) == 1) || - !list_empty(&st->request_list), - HZ/2); - - while (!list_empty(&st->request_list)) { - p = NULL; - spin_lock_irqsave(&st->request_lock, flags); - if (!list_empty(&st->request_list)) { - p = list_first_entry(&st->request_list, - struct dst_export_priv, request_entry); - list_del(&p->request_entry); - } - spin_unlock_irqrestore(&st->request_lock, flags); - - if (p) - bio_put(p->bio); - - dprintk("%s: st: %p, refcnt: %d, list_empty: %d, p: " - "%p.\n", __func__, st, atomic_read(&st->refcnt), - list_empty(&st->request_list), p); - } - } - - dst_state_put(st); -} - -/* - * Client accepting thread. - * Not only accepts new connection, but also schedules receiving thread - * and performs request completion described above. - */ -static int dst_accept(void *init_data, void *schedule_data) -{ - struct dst_state *main_st = schedule_data; - struct dst_node *n = init_data; - struct dst_state *st; - int err; - - while (n->trans_scan_timeout && !main_st->need_exit) { - dprintk("%s: main_st: %p, n: %p.\n", __func__, main_st, n); - st = dst_accept_client(main_st); - if (IS_ERR(st)) - continue; - - err = dst_state_schedule_receiver(st); - if (!err) { - while (n->trans_scan_timeout) { - err = wait_event_interruptible_timeout(st->thread_wait, - !list_empty(&st->request_list) || - !n->trans_scan_timeout || - st->need_exit, - HZ); - - if (!n->trans_scan_timeout || st->need_exit) - break; - - if (list_empty(&st->request_list)) - continue; - - err = dst_export_process_request_queue(st); - if (err) - break; - } - - st->need_exit = 1; - wake_up(&st->thread_wait); - } - - dst_state_cleanup_export(st); - } - - dprintk("%s: freeing listening socket st: %p.\n", __func__, main_st); - - dst_state_lock(main_st); - dst_poll_exit(main_st); - dst_state_socket_release(main_st); - dst_state_unlock(main_st); - dst_state_put(main_st); - dprintk("%s: freed listening socket st: %p.\n", __func__, main_st); - - return 0; -} - -int dst_start_export(struct dst_node *n) -{ - if (list_empty(&n->security_list)) { - printk(KERN_ERR "You are trying to export node '%s' " - "without security attributes.\nNo clients will " - "be allowed to connect. Exiting.\n", n->name); - return -EINVAL; - } - return dst_node_trans_init(n, sizeof(struct dst_export_priv)); -} - -/* - * Initialize listening state and schedule accepting thread. - */ -int dst_node_init_listened(struct dst_node *n, struct dst_export_ctl *le) -{ - struct dst_state *st; - int err = -ENOMEM; - struct dst_network_ctl *ctl = &le->ctl; - - memcpy(&n->info->net, ctl, sizeof(struct dst_network_ctl)); - - st = dst_state_alloc(n); - if (IS_ERR(st)) { - err = PTR_ERR(st); - goto err_out_exit; - } - memcpy(&st->ctl, ctl, sizeof(struct dst_network_ctl)); - - err = dst_state_socket_create(st); - if (err) - goto err_out_put; - - st->socket->sk->sk_reuse = 1; - - err = kernel_bind(st->socket, (struct sockaddr *)&ctl->addr, - ctl->addr.sa_data_len); - if (err) - goto err_out_socket_release; - - err = kernel_listen(st->socket, 1024); - if (err) - goto err_out_socket_release; - n->state = st; - - err = dst_poll_init(st); - if (err) - goto err_out_socket_release; - - dst_state_get(st); - - err = thread_pool_schedule(n->pool, dst_thread_setup, - dst_accept, st, MAX_SCHEDULE_TIMEOUT); - if (err) - goto err_out_poll_exit; - - return 0; - -err_out_poll_exit: - dst_poll_exit(st); -err_out_socket_release: - dst_state_socket_release(st); -err_out_put: - dst_state_put(st); -err_out_exit: - n->state = NULL; - return err; -} - -/* - * Free bio and related private data. - * Also drop a reference counter for appropriate state, - * which waits when there are no more block IOs in-flight. - */ -static void dst_bio_destructor(struct bio *bio) -{ - struct bio_vec *bv; - struct dst_export_priv *priv = bio->bi_private; - int i; - - bio_for_each_segment(bv, bio, i) { - if (!bv->bv_page) - break; - - __free_page(bv->bv_page); - } - - if (priv) - dst_state_put(priv->state); - bio_free(bio, dst_bio_set); -} - -/* - * Block IO completion. Queue request to be sent back to - * the client (or just confirmation). - */ -static void dst_bio_end_io(struct bio *bio, int err) -{ - struct dst_export_priv *p = bio->bi_private; - struct dst_state *st = p->state; - unsigned long flags; - - spin_lock_irqsave(&st->request_lock, flags); - list_add_tail(&p->request_entry, &st->request_list); - spin_unlock_irqrestore(&st->request_lock, flags); - - wake_up(&st->thread_wait); -} - -/* - * Allocate read request for the server. - */ -static int dst_export_read_request(struct bio *bio, unsigned int total_size) -{ - unsigned int size; - struct page *page; - int err; - - while (total_size) { - err = -ENOMEM; - page = alloc_page(GFP_KERNEL); - if (!page) - goto err_out_exit; - - size = min_t(unsigned int, PAGE_SIZE, total_size); - - err = bio_add_page(bio, page, size, 0); - dprintk("%s: bio: %llu/%u, size: %u, err: %d.\n", - __func__, (u64)bio->bi_sector, bio->bi_size, - size, err); - if (err <= 0) - goto err_out_free_page; - - total_size -= size; - } - - return 0; - -err_out_free_page: - __free_page(page); -err_out_exit: - return err; -} - -/* - * Allocate write request for the server. - * Should not only get pages, but also read data from the network. - */ -static int dst_export_write_request(struct dst_state *st, - struct bio *bio, unsigned int total_size) -{ - unsigned int size; - struct page *page; - void *data; - int err; - - while (total_size) { - err = -ENOMEM; - page = alloc_page(GFP_KERNEL); - if (!page) - goto err_out_exit; - - data = kmap(page); - if (!data) - goto err_out_free_page; - - size = min_t(unsigned int, PAGE_SIZE, total_size); - - err = dst_data_recv(st, data, size); - if (err) - goto err_out_unmap_page; - - err = bio_add_page(bio, page, size, 0); - if (err <= 0) - goto err_out_unmap_page; - - kunmap(page); - - total_size -= size; - } - - return 0; - -err_out_unmap_page: - kunmap(page); -err_out_free_page: - __free_page(page); -err_out_exit: - return err; -} - -/* - * Groovy, we've gotten an IO request from the client. - * Allocate BIO from the bioset, private data from the mempool - * and lots of pages for IO. - */ -int dst_process_io(struct dst_state *st) -{ - struct dst_node *n = st->node; - struct dst_cmd *cmd = st->data; - struct bio *bio; - struct dst_export_priv *priv; - int err = -ENOMEM; - - if (unlikely(!n->bdev)) { - err = -EINVAL; - goto err_out_exit; - } - - bio = bio_alloc_bioset(GFP_KERNEL, - PAGE_ALIGN(cmd->size) >> PAGE_SHIFT, - dst_bio_set); - if (!bio) - goto err_out_exit; - - priv = (struct dst_export_priv *)(((void *)bio) - - sizeof (struct dst_export_priv)); - - priv->state = dst_state_get(st); - priv->bio = bio; - - bio->bi_private = priv; - bio->bi_end_io = dst_bio_end_io; - bio->bi_destructor = dst_bio_destructor; - bio->bi_bdev = n->bdev; - - /* - * Server side is only interested in two low bits: - * uptodate (set by itself actually) and rw block - */ - bio->bi_flags |= cmd->flags & 3; - - bio->bi_rw = cmd->rw; - bio->bi_size = 0; - bio->bi_sector = cmd->sector; - - dst_bio_to_cmd(bio, &priv->cmd, DST_IO_RESPONSE, cmd->id); - - priv->cmd.flags = 0; - priv->cmd.size = cmd->size; - - if (bio_data_dir(bio) == WRITE) { - err = dst_recv_cdata(st, priv->cmd.hash); - if (err) - goto err_out_free; - - err = dst_export_write_request(st, bio, cmd->size); - if (err) - goto err_out_free; - - if (dst_need_crypto(n)) - return dst_export_crypto(n, bio); - } else { - err = dst_export_read_request(bio, cmd->size); - if (err) - goto err_out_free; - } - - dprintk("%s: bio: %llu/%u, rw: %lu, dir: %lu, flags: %lx, phys: %d.\n", - __func__, (u64)bio->bi_sector, bio->bi_size, - bio->bi_rw, bio_data_dir(bio), - bio->bi_flags, bio->bi_phys_segments); - - generic_make_request(bio); - - return 0; - -err_out_free: - bio_put(bio); -err_out_exit: - return err; -} - -/* - * Ok, block IO is ready, let's send it back to the client... - */ -int dst_export_send_bio(struct bio *bio) -{ - struct dst_export_priv *p = bio->bi_private; - struct dst_state *st = p->state; - struct dst_cmd *cmd = &p->cmd; - int err; - - dprintk("%s: id: %llu, bio: %llu/%u, csize: %u, flags: %lu, rw: %lu.\n", - __func__, cmd->id, (u64)bio->bi_sector, bio->bi_size, - cmd->csize, bio->bi_flags, bio->bi_rw); - - dst_convert_cmd(cmd); - - dst_state_lock(st); - if (!st->socket) { - err = -ECONNRESET; - goto err_out_unlock; - } - - if (bio_data_dir(bio) == WRITE) { - /* ... or just confirmation that writing has completed. */ - cmd->size = cmd->csize = 0; - err = dst_data_send_header(st->socket, cmd, - sizeof(struct dst_cmd), 0); - if (err) - goto err_out_unlock; - } else { - err = dst_send_bio(st, cmd, bio); - if (err) - goto err_out_unlock; - } - - dst_state_unlock(st); - - bio_put(bio); - return 0; - -err_out_unlock: - dst_state_unlock(st); - - bio_put(bio); - return err; -} diff --git a/drivers/staging/dst/state.c b/drivers/staging/dst/state.c deleted file mode 100644 index 02a05e6c48c..00000000000 --- a/drivers/staging/dst/state.c +++ /dev/null @@ -1,844 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/buffer_head.h> -#include <linux/blkdev.h> -#include <linux/bio.h> -#include <linux/connector.h> -#include <linux/dst.h> -#include <linux/device.h> -#include <linux/in.h> -#include <linux/in6.h> -#include <linux/socket.h> -#include <linux/slab.h> - -#include <net/sock.h> - -/* - * Polling machinery. - */ - -struct dst_poll_helper { - poll_table pt; - struct dst_state *st; -}; - -static int dst_queue_wake(wait_queue_t *wait, unsigned mode, - int sync, void *key) -{ - struct dst_state *st = container_of(wait, struct dst_state, wait); - - wake_up(&st->thread_wait); - return 1; -} - -static void dst_queue_func(struct file *file, wait_queue_head_t *whead, - poll_table *pt) -{ - struct dst_state *st = container_of(pt, struct dst_poll_helper, pt)->st; - - st->whead = whead; - init_waitqueue_func_entry(&st->wait, dst_queue_wake); - add_wait_queue(whead, &st->wait); -} - -void dst_poll_exit(struct dst_state *st) -{ - if (st->whead) { - remove_wait_queue(st->whead, &st->wait); - st->whead = NULL; - } -} - -int dst_poll_init(struct dst_state *st) -{ - struct dst_poll_helper ph; - - ph.st = st; - init_poll_funcptr(&ph.pt, &dst_queue_func); - - st->socket->ops->poll(NULL, st->socket, &ph.pt); - return 0; -} - -/* - * Header receiving function - may block. - */ -static int dst_data_recv_header(struct socket *sock, - void *data, unsigned int size, int block) -{ - struct msghdr msg; - struct kvec iov; - int err; - - iov.iov_base = data; - iov.iov_len = size; - - msg.msg_iov = (struct iovec *)&iov; - msg.msg_iovlen = 1; - msg.msg_name = NULL; - msg.msg_namelen = 0; - msg.msg_control = NULL; - msg.msg_controllen = 0; - msg.msg_flags = (block) ? MSG_WAITALL : MSG_DONTWAIT; - - err = kernel_recvmsg(sock, &msg, &iov, 1, iov.iov_len, - msg.msg_flags); - if (err != size) - return -1; - - return 0; -} - -/* - * Header sending function - may block. - */ -int dst_data_send_header(struct socket *sock, - void *data, unsigned int size, int more) -{ - struct msghdr msg; - struct kvec iov; - int err; - - iov.iov_base = data; - iov.iov_len = size; - - msg.msg_iov = (struct iovec *)&iov; - msg.msg_iovlen = 1; - msg.msg_name = NULL; - msg.msg_namelen = 0; - msg.msg_control = NULL; - msg.msg_controllen = 0; - msg.msg_flags = MSG_WAITALL | (more ? MSG_MORE : 0); - - err = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); - if (err != size) { - dprintk("%s: size: %u, more: %d, err: %d.\n", - __func__, size, more, err); - return -1; - } - - return 0; -} - -/* - * Block autoconfiguration: request size of the storage and permissions. - */ -static int dst_request_remote_config(struct dst_state *st) -{ - struct dst_node *n = st->node; - int err = -EINVAL; - struct dst_cmd *cmd = st->data; - - memset(cmd, 0, sizeof(struct dst_cmd)); - cmd->cmd = DST_CFG; - - dst_convert_cmd(cmd); - - err = dst_data_send_header(st->socket, cmd, sizeof(struct dst_cmd), 0); - if (err) - goto out; - - err = dst_data_recv_header(st->socket, cmd, sizeof(struct dst_cmd), 1); - if (err) - goto out; - - dst_convert_cmd(cmd); - - if (cmd->cmd != DST_CFG) { - err = -EINVAL; - dprintk("%s: checking result: cmd: %d, size reported: %llu.\n", - __func__, cmd->cmd, cmd->sector); - goto out; - } - - if (n->size != 0) - n->size = min_t(loff_t, n->size, cmd->sector); - else - n->size = cmd->sector; - - n->info->size = n->size; - st->permissions = cmd->rw; - -out: - dprintk("%s: n: %p, err: %d, size: %llu, permission: %x.\n", - __func__, n, err, n->size, st->permissions); - return err; -} - -/* - * Socket machinery. - */ - -#define DST_DEFAULT_TIMEO 20000 - -int dst_state_socket_create(struct dst_state *st) -{ - int err; - struct socket *sock; - struct dst_network_ctl *ctl = &st->ctl; - - err = sock_create(ctl->addr.sa_family, ctl->type, ctl->proto, &sock); - if (err < 0) - return err; - - sock->sk->sk_sndtimeo = sock->sk->sk_rcvtimeo = - msecs_to_jiffies(DST_DEFAULT_TIMEO); - sock->sk->sk_allocation = GFP_NOIO; - - st->socket = st->read_socket = sock; - return 0; -} - -void dst_state_socket_release(struct dst_state *st) -{ - dprintk("%s: st: %p, socket: %p, n: %p.\n", - __func__, st, st->socket, st->node); - if (st->socket) { - sock_release(st->socket); - st->socket = NULL; - st->read_socket = NULL; - } -} - -void dst_dump_addr(struct socket *sk, struct sockaddr *sa, char *str) -{ - if (sk->ops->family == AF_INET) { - struct sockaddr_in *sin = (struct sockaddr_in *)sa; - printk(KERN_INFO "%s %u.%u.%u.%u:%d.\n", str, - NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port)); - } else if (sk->ops->family == AF_INET6) { - struct sockaddr_in6 *sin = (struct sockaddr_in6 *)sa; - printk(KERN_INFO "%s %pi6:%d", - str, &sin->sin6_addr, ntohs(sin->sin6_port)); - } -} - -void dst_state_exit_connected(struct dst_state *st) -{ - if (st->socket) { - dst_poll_exit(st); - st->socket->ops->shutdown(st->socket, 2); - - dst_dump_addr(st->socket, (struct sockaddr *)&st->ctl.addr, - "Disconnected peer"); - dst_state_socket_release(st); - } -} - -static int dst_state_init_connected(struct dst_state *st) -{ - int err; - struct dst_network_ctl *ctl = &st->ctl; - - err = dst_state_socket_create(st); - if (err) - goto err_out_exit; - - err = kernel_connect(st->socket, (struct sockaddr *)&st->ctl.addr, - st->ctl.addr.sa_data_len, 0); - if (err) - goto err_out_release; - - err = dst_poll_init(st); - if (err) - goto err_out_release; - - dst_dump_addr(st->socket, (struct sockaddr *)&ctl->addr, - "Connected to peer"); - - return 0; - -err_out_release: - dst_state_socket_release(st); -err_out_exit: - return err; -} - -/* - * State reset is used to reconnect to the remote peer. - * May fail, but who cares, we will try again later. - */ -static inline void dst_state_reset_nolock(struct dst_state *st) -{ - dst_state_exit_connected(st); - dst_state_init_connected(st); -} - -static inline void dst_state_reset(struct dst_state *st) -{ - dst_state_lock(st); - dst_state_reset_nolock(st); - dst_state_unlock(st); -} - -/* - * Basic network sending/receiving functions. - * Blocked mode is used. - */ -static int dst_data_recv_raw(struct dst_state *st, void *buf, u64 size) -{ - struct msghdr msg; - struct kvec iov; - int err; - - BUG_ON(!size); - - iov.iov_base = buf; - iov.iov_len = size; - - msg.msg_iov = (struct iovec *)&iov; - msg.msg_iovlen = 1; - msg.msg_name = NULL; - msg.msg_namelen = 0; - msg.msg_control = NULL; - msg.msg_controllen = 0; - msg.msg_flags = MSG_DONTWAIT; - - err = kernel_recvmsg(st->socket, &msg, &iov, 1, iov.iov_len, - msg.msg_flags); - if (err <= 0) { - dprintk("%s: failed to recv data: size: %llu, err: %d.\n", - __func__, size, err); - if (err == 0) - err = -ECONNRESET; - - dst_state_exit_connected(st); - } - - return err; -} - -/* - * Ping command to early detect failed nodes. - */ -static int dst_send_ping(struct dst_state *st) -{ - struct dst_cmd *cmd = st->data; - int err = -ECONNRESET; - - dst_state_lock(st); - if (st->socket) { - memset(cmd, 0, sizeof(struct dst_cmd)); - - cmd->cmd = __cpu_to_be32(DST_PING); - - err = dst_data_send_header(st->socket, cmd, - sizeof(struct dst_cmd), 0); - } - dprintk("%s: st: %p, socket: %p, err: %d.\n", __func__, - st, st->socket, err); - dst_state_unlock(st); - - return err; -} - -/* - * Receiving function, which should either return error or read - * whole block request. If there was no traffic for a one second, - * send a ping, since remote node may die. - */ -int dst_data_recv(struct dst_state *st, void *data, unsigned int size) -{ - unsigned int revents = 0; - unsigned int err_mask = POLLERR | POLLHUP | POLLRDHUP; - unsigned int mask = err_mask | POLLIN; - struct dst_node *n = st->node; - int err = 0; - - while (size && !err) { - revents = dst_state_poll(st); - - if (!(revents & mask)) { - DEFINE_WAIT(wait); - - for (;;) { - prepare_to_wait(&st->thread_wait, &wait, - TASK_INTERRUPTIBLE); - if (!n->trans_scan_timeout || st->need_exit) - break; - - revents = dst_state_poll(st); - - if (revents & mask) - break; - - if (signal_pending(current)) - break; - - if (!schedule_timeout(HZ)) { - err = dst_send_ping(st); - if (err) - return err; - } - - continue; - } - finish_wait(&st->thread_wait, &wait); - } - - err = -ECONNRESET; - dst_state_lock(st); - - if (st->socket && (st->read_socket == st->socket) && - (revents & POLLIN)) { - err = dst_data_recv_raw(st, data, size); - if (err > 0) { - data += err; - size -= err; - err = 0; - } - } - - if (revents & err_mask || !st->socket) { - dprintk("%s: revents: %x, socket: %p, size: %u, " - "err: %d.\n", __func__, revents, - st->socket, size, err); - err = -ECONNRESET; - } - - dst_state_unlock(st); - - if (!n->trans_scan_timeout) - err = -ENODEV; - } - - return err; -} - -/* - * Send block autoconf reply. - */ -static int dst_process_cfg(struct dst_state *st) -{ - struct dst_node *n = st->node; - struct dst_cmd *cmd = st->data; - int err; - - cmd->sector = n->size; - cmd->rw = st->permissions; - - dst_convert_cmd(cmd); - - dst_state_lock(st); - err = dst_data_send_header(st->socket, cmd, sizeof(struct dst_cmd), 0); - dst_state_unlock(st); - - return err; -} - -/* - * Receive block IO from the network. - */ -static int dst_recv_bio(struct dst_state *st, struct bio *bio, - unsigned int total_size) -{ - struct bio_vec *bv; - int i, err; - void *data; - unsigned int sz; - - bio_for_each_segment(bv, bio, i) { - sz = min(total_size, bv->bv_len); - - dprintk("%s: bio: %llu/%u, total: %u, len: %u, sz: %u, " - "off: %u.\n", __func__, (u64)bio->bi_sector, - bio->bi_size, total_size, bv->bv_len, sz, - bv->bv_offset); - - data = kmap(bv->bv_page) + bv->bv_offset; - err = dst_data_recv(st, data, sz); - kunmap(bv->bv_page); - - bv->bv_len = sz; - - if (err) - return err; - - total_size -= sz; - if (total_size == 0) - break; - } - - return 0; -} - -/* - * Our block IO has just completed and arrived: get it. - */ -static int dst_process_io_response(struct dst_state *st) -{ - struct dst_node *n = st->node; - struct dst_cmd *cmd = st->data; - struct dst_trans *t; - int err = 0; - struct bio *bio; - - mutex_lock(&n->trans_lock); - t = dst_trans_search(n, cmd->id); - mutex_unlock(&n->trans_lock); - - if (!t) - goto err_out_exit; - - bio = t->bio; - - dprintk("%s: bio: %llu/%u, cmd_size: %u, csize: %u, dir: %lu.\n", - __func__, (u64)bio->bi_sector, bio->bi_size, cmd->size, - cmd->csize, bio_data_dir(bio)); - - if (bio_data_dir(bio) == READ) { - if (bio->bi_size != cmd->size - cmd->csize) - goto err_out_exit; - - if (dst_need_crypto(n)) { - err = dst_recv_cdata(st, t->cmd.hash); - if (err) - goto err_out_exit; - } - - err = dst_recv_bio(st, t->bio, bio->bi_size); - if (err) - goto err_out_exit; - - if (dst_need_crypto(n)) - return dst_trans_crypto(t); - } else { - err = -EBADMSG; - if (cmd->size || cmd->csize) - goto err_out_exit; - } - - dst_trans_remove(t); - dst_trans_put(t); - - return 0; - -err_out_exit: - return err; -} - -/* - * Receive crypto data. - */ -int dst_recv_cdata(struct dst_state *st, void *cdata) -{ - struct dst_cmd *cmd = st->data; - struct dst_node *n = st->node; - struct dst_crypto_ctl *c = &n->crypto; - int err; - - if (cmd->csize != c->crypto_attached_size) { - dprintk("%s: cmd: cmd: %u, sector: %llu, size: %u, " - "csize: %u != digest size %u.\n", - __func__, cmd->cmd, cmd->sector, cmd->size, - cmd->csize, c->crypto_attached_size); - err = -EINVAL; - goto err_out_exit; - } - - err = dst_data_recv(st, cdata, cmd->csize); - if (err) - goto err_out_exit; - - cmd->size -= cmd->csize; - return 0; - -err_out_exit: - return err; -} - -/* - * Receive the command and start its processing. - */ -static int dst_recv_processing(struct dst_state *st) -{ - int err = -EINTR; - struct dst_cmd *cmd = st->data; - - /* - * If socket will be reset after this statement, then - * dst_data_recv() will just fail and loop will - * start again, so it can be done without any locks. - * - * st->read_socket is needed to prevents state machine - * breaking between this data reading and subsequent one - * in protocol specific functions during connection reset. - * In case of reset we have to read next command and do - * not expect data for old command to magically appear in - * new connection. - */ - st->read_socket = st->socket; - err = dst_data_recv(st, cmd, sizeof(struct dst_cmd)); - if (err) - goto out_exit; - - dst_convert_cmd(cmd); - - dprintk("%s: cmd: %u, size: %u, csize: %u, id: %llu, " - "sector: %llu, flags: %llx, rw: %llx.\n", - __func__, cmd->cmd, cmd->size, - cmd->csize, cmd->id, cmd->sector, - cmd->flags, cmd->rw); - - /* - * This should catch protocol breakage and random garbage - * instead of commands. - */ - if (unlikely(cmd->csize > st->size - sizeof(struct dst_cmd))) { - err = -EBADMSG; - goto out_exit; - } - - err = -EPROTO; - switch (cmd->cmd) { - case DST_IO_RESPONSE: - err = dst_process_io_response(st); - break; - case DST_IO: - err = dst_process_io(st); - break; - case DST_CFG: - err = dst_process_cfg(st); - break; - case DST_PING: - err = 0; - break; - default: - break; - } - -out_exit: - return err; -} - -/* - * Receiving thread. For the client node we should try to reconnect, - * for accepted client we just drop the state and expect it to reconnect. - */ -static int dst_recv(void *init_data, void *schedule_data) -{ - struct dst_state *st = schedule_data; - struct dst_node *n = init_data; - int err = 0; - - dprintk("%s: start st: %p, n: %p, scan: %lu, need_exit: %d.\n", - __func__, st, n, n->trans_scan_timeout, st->need_exit); - - while (n->trans_scan_timeout && !st->need_exit) { - err = dst_recv_processing(st); - if (err < 0) { - if (!st->ctl.type) - break; - - if (!n->trans_scan_timeout || st->need_exit) - break; - - dst_state_reset(st); - msleep(1000); - } - } - - st->need_exit = 1; - wake_up(&st->thread_wait); - - dprintk("%s: freeing receiving socket st: %p.\n", __func__, st); - dst_state_lock(st); - dst_state_exit_connected(st); - dst_state_unlock(st); - dst_state_put(st); - - dprintk("%s: freed receiving socket st: %p.\n", __func__, st); - - return err; -} - -/* - * Network state dies here and borns couple of lines below. - * This object is the main network state processing engine: - * sending, receiving, reconnections, all network related - * tasks are handled on behalf of the state. - */ -static void dst_state_free(struct dst_state *st) -{ - dprintk("%s: st: %p.\n", __func__, st); - if (st->cleanup) - st->cleanup(st); - kfree(st->data); - kfree(st); -} - -struct dst_state *dst_state_alloc(struct dst_node *n) -{ - struct dst_state *st; - int err = -ENOMEM; - - st = kzalloc(sizeof(struct dst_state), GFP_KERNEL); - if (!st) - goto err_out_exit; - - st->node = n; - st->need_exit = 0; - - st->size = PAGE_SIZE; - st->data = kmalloc(st->size, GFP_KERNEL); - if (!st->data) - goto err_out_free; - - spin_lock_init(&st->request_lock); - INIT_LIST_HEAD(&st->request_list); - - mutex_init(&st->state_lock); - init_waitqueue_head(&st->thread_wait); - - /* - * One for processing thread, another one for node itself. - */ - atomic_set(&st->refcnt, 2); - - dprintk("%s: st: %p, n: %p.\n", __func__, st, st->node); - - return st; - -err_out_free: - kfree(st); -err_out_exit: - return ERR_PTR(err); -} - -int dst_state_schedule_receiver(struct dst_state *st) -{ - return thread_pool_schedule_private(st->node->pool, dst_thread_setup, - dst_recv, st, MAX_SCHEDULE_TIMEOUT, st->node); -} - -/* - * Initialize client's connection to the remote peer: allocate state, - * connect and perform block IO autoconfiguration. - */ -int dst_node_init_connected(struct dst_node *n, struct dst_network_ctl *r) -{ - struct dst_state *st; - int err = -ENOMEM; - - st = dst_state_alloc(n); - if (IS_ERR(st)) { - err = PTR_ERR(st); - goto err_out_exit; - } - memcpy(&st->ctl, r, sizeof(struct dst_network_ctl)); - - err = dst_state_init_connected(st); - if (err) - goto err_out_free_data; - - err = dst_request_remote_config(st); - if (err) - goto err_out_exit_connected; - n->state = st; - - err = dst_state_schedule_receiver(st); - if (err) - goto err_out_exit_connected; - - return 0; - -err_out_exit_connected: - dst_state_exit_connected(st); -err_out_free_data: - dst_state_free(st); -err_out_exit: - n->state = NULL; - return err; -} - -void dst_state_put(struct dst_state *st) -{ - dprintk("%s: st: %p, refcnt: %d.\n", - __func__, st, atomic_read(&st->refcnt)); - if (atomic_dec_and_test(&st->refcnt)) - dst_state_free(st); -} - -/* - * Send block IO to the network one by one using zero-copy ->sendpage(). - */ -int dst_send_bio(struct dst_state *st, struct dst_cmd *cmd, struct bio *bio) -{ - struct bio_vec *bv; - struct dst_crypto_ctl *c = &st->node->crypto; - int err, i = 0; - int flags = MSG_WAITALL; - - err = dst_data_send_header(st->socket, cmd, - sizeof(struct dst_cmd) + c->crypto_attached_size, bio->bi_vcnt); - if (err) - goto err_out_exit; - - bio_for_each_segment(bv, bio, i) { - if (i < bio->bi_vcnt - 1) - flags |= MSG_MORE; - - err = kernel_sendpage(st->socket, bv->bv_page, bv->bv_offset, - bv->bv_len, flags); - if (err <= 0) - goto err_out_exit; - } - - return 0; - -err_out_exit: - dprintk("%s: %d/%d, flags: %x, err: %d.\n", - __func__, i, bio->bi_vcnt, flags, err); - return err; -} - -/* - * Send transaction to the remote peer. - */ -int dst_trans_send(struct dst_trans *t) -{ - int err; - struct dst_state *st = t->n->state; - struct bio *bio = t->bio; - - dst_convert_cmd(&t->cmd); - - dst_state_lock(st); - if (!st->socket) { - err = dst_state_init_connected(st); - if (err) - goto err_out_unlock; - } - - if (bio_data_dir(bio) == WRITE) { - err = dst_send_bio(st, &t->cmd, t->bio); - } else { - err = dst_data_send_header(st->socket, &t->cmd, - sizeof(struct dst_cmd), 0); - } - if (err) - goto err_out_reset; - - dst_state_unlock(st); - return 0; - -err_out_reset: - dst_state_reset_nolock(st); -err_out_unlock: - dst_state_unlock(st); - - return err; -} diff --git a/drivers/staging/dst/thread_pool.c b/drivers/staging/dst/thread_pool.c deleted file mode 100644 index 29a82b2602f..00000000000 --- a/drivers/staging/dst/thread_pool.c +++ /dev/null @@ -1,348 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/dst.h> -#include <linux/kthread.h> -#include <linux/slab.h> - -/* - * Thread pool abstraction allows to schedule a work to be performed - * on behalf of kernel thread. One does not operate with threads itself, - * instead user provides setup and cleanup callbacks for thread pool itself, - * and action and cleanup callbacks for each submitted work. - * - * Each worker has private data initialized at creation time and data, - * provided by user at scheduling time. - * - * When action is being performed, thread can not be used by other users, - * instead they will sleep until there is free thread to pick their work. - */ -struct thread_pool_worker { - struct list_head worker_entry; - - struct task_struct *thread; - - struct thread_pool *pool; - - int error; - int has_data; - int need_exit; - unsigned int id; - - wait_queue_head_t wait; - - void *private; - void *schedule_data; - - int (*action)(void *private, void *schedule_data); - void (*cleanup)(void *private); -}; - -static void thread_pool_exit_worker(struct thread_pool_worker *w) -{ - kthread_stop(w->thread); - - w->cleanup(w->private); - kfree(w); -} - -/* - * Called to mark thread as ready and allow users to schedule new work. - */ -static void thread_pool_worker_make_ready(struct thread_pool_worker *w) -{ - struct thread_pool *p = w->pool; - - mutex_lock(&p->thread_lock); - - if (!w->need_exit) { - list_move_tail(&w->worker_entry, &p->ready_list); - w->has_data = 0; - mutex_unlock(&p->thread_lock); - - wake_up(&p->wait); - } else { - p->thread_num--; - list_del(&w->worker_entry); - mutex_unlock(&p->thread_lock); - - thread_pool_exit_worker(w); - } -} - -/* - * Thread action loop: waits until there is new work. - */ -static int thread_pool_worker_func(void *data) -{ - struct thread_pool_worker *w = data; - - while (!kthread_should_stop()) { - wait_event_interruptible(w->wait, - kthread_should_stop() || w->has_data); - - if (kthread_should_stop()) - break; - - if (!w->has_data) - continue; - - w->action(w->private, w->schedule_data); - thread_pool_worker_make_ready(w); - } - - return 0; -} - -/* - * Remove single worker without specifying which one. - */ -void thread_pool_del_worker(struct thread_pool *p) -{ - struct thread_pool_worker *w = NULL; - - while (!w && p->thread_num) { - wait_event(p->wait, !list_empty(&p->ready_list) || - !p->thread_num); - - dprintk("%s: locking list_empty: %d, thread_num: %d.\n", - __func__, list_empty(&p->ready_list), - p->thread_num); - - mutex_lock(&p->thread_lock); - if (!list_empty(&p->ready_list)) { - w = list_first_entry(&p->ready_list, - struct thread_pool_worker, - worker_entry); - - dprintk("%s: deleting w: %p, thread_num: %d, " - "list: %p [%p.%p].\n", __func__, - w, p->thread_num, &p->ready_list, - p->ready_list.prev, p->ready_list.next); - - p->thread_num--; - list_del(&w->worker_entry); - } - mutex_unlock(&p->thread_lock); - } - - if (w) - thread_pool_exit_worker(w); - dprintk("%s: deleted w: %p, thread_num: %d.\n", - __func__, w, p->thread_num); -} - -/* - * Remove a worker with given ID. - */ -void thread_pool_del_worker_id(struct thread_pool *p, unsigned int id) -{ - struct thread_pool_worker *w; - int found = 0; - - mutex_lock(&p->thread_lock); - list_for_each_entry(w, &p->ready_list, worker_entry) { - if (w->id == id) { - found = 1; - p->thread_num--; - list_del(&w->worker_entry); - break; - } - } - - if (!found) { - list_for_each_entry(w, &p->active_list, worker_entry) { - if (w->id == id) { - w->need_exit = 1; - break; - } - } - } - mutex_unlock(&p->thread_lock); - - if (found) - thread_pool_exit_worker(w); -} - -/* - * Add new worker thread with given parameters. - * If initialization callback fails, return error. - */ -int thread_pool_add_worker(struct thread_pool *p, - char *name, - unsigned int id, - void *(*init)(void *private), - void (*cleanup)(void *private), - void *private) -{ - struct thread_pool_worker *w; - int err = -ENOMEM; - - w = kzalloc(sizeof(struct thread_pool_worker), GFP_KERNEL); - if (!w) - goto err_out_exit; - - w->pool = p; - init_waitqueue_head(&w->wait); - w->cleanup = cleanup; - w->id = id; - - w->thread = kthread_run(thread_pool_worker_func, w, "%s", name); - if (IS_ERR(w->thread)) { - err = PTR_ERR(w->thread); - goto err_out_free; - } - - w->private = init(private); - if (IS_ERR(w->private)) { - err = PTR_ERR(w->private); - goto err_out_stop_thread; - } - - mutex_lock(&p->thread_lock); - list_add_tail(&w->worker_entry, &p->ready_list); - p->thread_num++; - mutex_unlock(&p->thread_lock); - - return 0; - -err_out_stop_thread: - kthread_stop(w->thread); -err_out_free: - kfree(w); -err_out_exit: - return err; -} - -/* - * Destroy the whole pool. - */ -void thread_pool_destroy(struct thread_pool *p) -{ - while (p->thread_num) { - dprintk("%s: num: %d.\n", __func__, p->thread_num); - thread_pool_del_worker(p); - } - - kfree(p); -} - -/* - * Create a pool with given number of threads. - * They will have sequential IDs started from zero. - */ -struct thread_pool *thread_pool_create(int num, char *name, - void *(*init)(void *private), - void (*cleanup)(void *private), - void *private) -{ - struct thread_pool_worker *w, *tmp; - struct thread_pool *p; - int err = -ENOMEM; - int i; - - p = kzalloc(sizeof(struct thread_pool), GFP_KERNEL); - if (!p) - goto err_out_exit; - - init_waitqueue_head(&p->wait); - mutex_init(&p->thread_lock); - INIT_LIST_HEAD(&p->ready_list); - INIT_LIST_HEAD(&p->active_list); - p->thread_num = 0; - - for (i = 0; i < num; ++i) { - err = thread_pool_add_worker(p, name, i, init, - cleanup, private); - if (err) - goto err_out_free_all; - } - - return p; - -err_out_free_all: - list_for_each_entry_safe(w, tmp, &p->ready_list, worker_entry) { - list_del(&w->worker_entry); - thread_pool_exit_worker(w); - } - kfree(p); -err_out_exit: - return ERR_PTR(err); -} - -/* - * Schedule execution of the action on a given thread, - * provided ID pointer has to match previously stored - * private data. - */ -int thread_pool_schedule_private(struct thread_pool *p, - int (*setup)(void *private, void *data), - int (*action)(void *private, void *data), - void *data, long timeout, void *id) -{ - struct thread_pool_worker *w, *tmp, *worker = NULL; - int err = 0; - - while (!worker && !err) { - timeout = wait_event_interruptible_timeout(p->wait, - !list_empty(&p->ready_list), - timeout); - - if (!timeout) { - err = -ETIMEDOUT; - break; - } - - worker = NULL; - mutex_lock(&p->thread_lock); - list_for_each_entry_safe(w, tmp, &p->ready_list, worker_entry) { - if (id && id != w->private) - continue; - - worker = w; - - list_move_tail(&w->worker_entry, &p->active_list); - - err = setup(w->private, data); - if (!err) { - w->schedule_data = data; - w->action = action; - w->has_data = 1; - wake_up(&w->wait); - } else { - list_move_tail(&w->worker_entry, - &p->ready_list); - } - - break; - } - mutex_unlock(&p->thread_lock); - } - - return err; -} - -/* - * Schedule execution on arbitrary thread from the pool. - */ -int thread_pool_schedule(struct thread_pool *p, - int (*setup)(void *private, void *data), - int (*action)(void *private, void *data), - void *data, long timeout) -{ - return thread_pool_schedule_private(p, setup, - action, data, timeout, NULL); -} diff --git a/drivers/staging/dst/trans.c b/drivers/staging/dst/trans.c deleted file mode 100644 index 1c36a6bc31d..00000000000 --- a/drivers/staging/dst/trans.c +++ /dev/null @@ -1,337 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/bio.h> -#include <linux/dst.h> -#include <linux/slab.h> -#include <linux/mempool.h> - -/* - * Transaction memory pool size. - */ -static int dst_mempool_num = 32; -module_param(dst_mempool_num, int, 0644); - -/* - * Transaction tree management. - */ -static inline int dst_trans_cmp(dst_gen_t gen, dst_gen_t new) -{ - if (gen < new) - return 1; - if (gen > new) - return -1; - return 0; -} - -struct dst_trans *dst_trans_search(struct dst_node *node, dst_gen_t gen) -{ - struct rb_root *root = &node->trans_root; - struct rb_node *n = root->rb_node; - struct dst_trans *t, *ret = NULL; - int cmp; - - while (n) { - t = rb_entry(n, struct dst_trans, trans_entry); - - cmp = dst_trans_cmp(t->gen, gen); - if (cmp < 0) - n = n->rb_left; - else if (cmp > 0) - n = n->rb_right; - else { - ret = t; - break; - } - } - - dprintk("%s: %s transaction: id: %llu.\n", __func__, - (ret) ? "found" : "not found", gen); - - return ret; -} - -static int dst_trans_insert(struct dst_trans *new) -{ - struct rb_root *root = &new->n->trans_root; - struct rb_node **n = &root->rb_node, *parent = NULL; - struct dst_trans *ret = NULL, *t; - int cmp; - - while (*n) { - parent = *n; - - t = rb_entry(parent, struct dst_trans, trans_entry); - - cmp = dst_trans_cmp(t->gen, new->gen); - if (cmp < 0) - n = &parent->rb_left; - else if (cmp > 0) - n = &parent->rb_right; - else { - ret = t; - break; - } - } - - new->send_time = jiffies; - if (ret) { - printk(KERN_DEBUG "%s: exist: old: gen: %llu, bio: %llu/%u, " - "send_time: %lu, new: gen: %llu, bio: %llu/%u, " - "send_time: %lu.\n", __func__, - ret->gen, (u64)ret->bio->bi_sector, - ret->bio->bi_size, ret->send_time, - new->gen, (u64)new->bio->bi_sector, - new->bio->bi_size, new->send_time); - return -EEXIST; - } - - rb_link_node(&new->trans_entry, parent, n); - rb_insert_color(&new->trans_entry, root); - - dprintk("%s: inserted: gen: %llu, bio: %llu/%u, send_time: %lu.\n", - __func__, new->gen, (u64)new->bio->bi_sector, - new->bio->bi_size, new->send_time); - - return 0; -} - -int dst_trans_remove_nolock(struct dst_trans *t) -{ - struct dst_node *n = t->n; - - if (t->trans_entry.rb_parent_color) { - rb_erase(&t->trans_entry, &n->trans_root); - t->trans_entry.rb_parent_color = 0; - } - return 0; -} - -int dst_trans_remove(struct dst_trans *t) -{ - int ret; - struct dst_node *n = t->n; - - mutex_lock(&n->trans_lock); - ret = dst_trans_remove_nolock(t); - mutex_unlock(&n->trans_lock); - - return ret; -} - -/* - * When transaction is completed and there are no more users, - * we complete appriate block IO request with given error status. - */ -void dst_trans_put(struct dst_trans *t) -{ - if (atomic_dec_and_test(&t->refcnt)) { - struct bio *bio = t->bio; - - dprintk("%s: completed t: %p, gen: %llu, bio: %p.\n", - __func__, t, t->gen, bio); - - bio_endio(bio, t->error); - bio_put(bio); - - dst_node_put(t->n); - mempool_free(t, t->n->trans_pool); - } -} - -/* - * Process given block IO request: allocate transaction, insert it into the tree - * and send/schedule crypto processing. - */ -int dst_process_bio(struct dst_node *n, struct bio *bio) -{ - struct dst_trans *t; - int err = -ENOMEM; - - t = mempool_alloc(n->trans_pool, GFP_NOFS); - if (!t) - goto err_out_exit; - - t->n = dst_node_get(n); - t->bio = bio; - t->error = 0; - t->retries = 0; - atomic_set(&t->refcnt, 1); - t->gen = atomic_long_inc_return(&n->gen); - - t->enc = bio_data_dir(bio); - dst_bio_to_cmd(bio, &t->cmd, DST_IO, t->gen); - - mutex_lock(&n->trans_lock); - err = dst_trans_insert(t); - mutex_unlock(&n->trans_lock); - if (err) - goto err_out_free; - - dprintk("%s: gen: %llu, bio: %llu/%u, dir/enc: %d, need_crypto: %d.\n", - __func__, t->gen, (u64)bio->bi_sector, - bio->bi_size, t->enc, dst_need_crypto(n)); - - if (dst_need_crypto(n) && t->enc) - dst_trans_crypto(t); - else - dst_trans_send(t); - - return 0; - -err_out_free: - dst_node_put(n); - mempool_free(t, n->trans_pool); -err_out_exit: - bio_endio(bio, err); - bio_put(bio); - return err; -} - -/* - * Scan for timeout/stale transactions. - * Each transaction is being resent multiple times before error completion. - */ -static void dst_trans_scan(struct work_struct *work) -{ - struct dst_node *n = container_of(work, struct dst_node, - trans_work.work); - struct rb_node *rb_node; - struct dst_trans *t; - unsigned long timeout = n->trans_scan_timeout; - int num = 10 * n->trans_max_retries; - - mutex_lock(&n->trans_lock); - - for (rb_node = rb_first(&n->trans_root); rb_node; ) { - t = rb_entry(rb_node, struct dst_trans, trans_entry); - - if (timeout && time_after(t->send_time + timeout, jiffies) - && t->retries == 0) - break; -#if 0 - dprintk("%s: t: %p, gen: %llu, n: %s, retries: %u, max: %u.\n", - __func__, t, t->gen, n->name, - t->retries, n->trans_max_retries); -#endif - if (--num == 0) - break; - - dst_trans_get(t); - - rb_node = rb_next(rb_node); - - if (timeout && (++t->retries < n->trans_max_retries)) { - dst_trans_send(t); - } else { - t->error = -ETIMEDOUT; - dst_trans_remove_nolock(t); - dst_trans_put(t); - } - - dst_trans_put(t); - } - - mutex_unlock(&n->trans_lock); - - /* - * If no timeout specified then system is in the middle of exiting - * process, so no need to reschedule scanning process again. - */ - if (timeout) { - if (!num) - timeout = HZ; - schedule_delayed_work(&n->trans_work, timeout); - } -} - -/* - * Flush all transactions and mark them as timed out. - * Destroy transaction pools. - */ -void dst_node_trans_exit(struct dst_node *n) -{ - struct dst_trans *t; - struct rb_node *rb_node; - - if (!n->trans_cache) - return; - - dprintk("%s: n: %p, cancelling the work.\n", __func__, n); - cancel_delayed_work_sync(&n->trans_work); - flush_scheduled_work(); - dprintk("%s: n: %p, work has been cancelled.\n", __func__, n); - - for (rb_node = rb_first(&n->trans_root); rb_node; ) { - t = rb_entry(rb_node, struct dst_trans, trans_entry); - - dprintk("%s: t: %p, gen: %llu, n: %s.\n", - __func__, t, t->gen, n->name); - - rb_node = rb_next(rb_node); - - t->error = -ETIMEDOUT; - dst_trans_remove_nolock(t); - dst_trans_put(t); - } - - mempool_destroy(n->trans_pool); - kmem_cache_destroy(n->trans_cache); -} - -/* - * Initialize transaction storage for given node. - * Transaction stores not only control information, - * but also network command and crypto data (if needed) - * to reduce number of allocations. Thus transaction size - * differs from node to node. - */ -int dst_node_trans_init(struct dst_node *n, unsigned int size) -{ - /* - * We need this, since node with given name can be dropped from the - * hash table, but be still alive, so subsequent creation of the node - * with the same name may collide with existing cache name. - */ - - snprintf(n->cache_name, sizeof(n->cache_name), "%s-%p", n->name, n); - - n->trans_cache = kmem_cache_create(n->cache_name, - size + n->crypto.crypto_attached_size, - 0, 0, NULL); - if (!n->trans_cache) - goto err_out_exit; - - n->trans_pool = mempool_create_slab_pool(dst_mempool_num, - n->trans_cache); - if (!n->trans_pool) - goto err_out_cache_destroy; - - mutex_init(&n->trans_lock); - n->trans_root = RB_ROOT; - - INIT_DELAYED_WORK(&n->trans_work, dst_trans_scan); - schedule_delayed_work(&n->trans_work, n->trans_scan_timeout); - - dprintk("%s: n: %p, size: %u, crypto: %u.\n", - __func__, n, size, n->crypto.crypto_attached_size); - - return 0; - -err_out_cache_destroy: - kmem_cache_destroy(n->trans_cache); -err_out_exit: - return -ENOMEM; -} diff --git a/drivers/staging/panel/Kconfig b/drivers/staging/panel/Kconfig index 3abe7c9d558..3defa0133f2 100644 --- a/drivers/staging/panel/Kconfig +++ b/drivers/staging/panel/Kconfig @@ -47,7 +47,7 @@ config PANEL_PROFILE config PANEL_KEYPAD depends on PANEL && PANEL_PROFILE="0" int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)" - range 0 4 + range 0 3 default 0 ---help--- This enables and configures a keypad connected to the parallel port. diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index f98a52448ea..95c93e82cce 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -378,7 +378,7 @@ static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES]; #ifdef CONFIG_PANEL_LCD_CHARSET #undef DEFAULT_LCD_CHARSET -#define DEFAULT_LCD_CHARSET +#define DEFAULT_LCD_CHARSET CONFIG_PANEL_LCD_CHARSET #endif #endif /* DEFAULT_PROFILE == 0 */ diff --git a/drivers/staging/ramzswap/TODO b/drivers/staging/ramzswap/TODO index bac40d6cb9f..8d64e28fac0 100644 --- a/drivers/staging/ramzswap/TODO +++ b/drivers/staging/ramzswap/TODO @@ -1,6 +1,5 @@ TODO: - Add support for swap notifiers - - Remove CONFIG_ARM hack Please send patches to Greg Kroah-Hartman <greg@kroah.com> and Nitin Gupta <ngupta@vflare.org> diff --git a/drivers/staging/ramzswap/ramzswap_drv.c b/drivers/staging/ramzswap/ramzswap_drv.c index b839f05efbc..989fac5b01b 100644 --- a/drivers/staging/ramzswap/ramzswap_drv.c +++ b/drivers/staging/ramzswap/ramzswap_drv.c @@ -222,28 +222,6 @@ out: return ret; } -static void ramzswap_flush_dcache_page(struct page *page) -{ -#ifdef CONFIG_ARM - int flag = 0; - /* - * Ugly hack to get flush_dcache_page() work on ARM. - * page_mapping(page) == NULL after clearing this swap cache flag. - * Without clearing this flag, flush_dcache_page() will simply set - * "PG_dcache_dirty" bit and return. - */ - if (PageSwapCache(page)) { - flag = 1; - ClearPageSwapCache(page); - } -#endif - flush_dcache_page(page); -#ifdef CONFIG_ARM - if (flag) - SetPageSwapCache(page); -#endif -} - void ramzswap_ioctl_get_stats(struct ramzswap *rzs, struct ramzswap_ioctl_stats *s) { @@ -655,7 +633,7 @@ static int handle_zero_page(struct bio *bio) memset(user_mem, 0, PAGE_SIZE); kunmap_atomic(user_mem, KM_USER0); - ramzswap_flush_dcache_page(page); + flush_dcache_page(page); set_bit(BIO_UPTODATE, &bio->bi_flags); bio_endio(bio, 0); @@ -679,7 +657,7 @@ static int handle_uncompressed_page(struct ramzswap *rzs, struct bio *bio) kunmap_atomic(user_mem, KM_USER0); kunmap_atomic(cmem, KM_USER1); - ramzswap_flush_dcache_page(page); + flush_dcache_page(page); set_bit(BIO_UPTODATE, &bio->bi_flags); bio_endio(bio, 0); @@ -779,7 +757,7 @@ static int ramzswap_read(struct ramzswap *rzs, struct bio *bio) goto out; } - ramzswap_flush_dcache_page(page); + flush_dcache_page(page); set_bit(BIO_UPTODATE, &bio->bi_flags); bio_endio(bio, 0); diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h index 3222c22152f..0d490c164db 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h @@ -1318,13 +1318,13 @@ extern int ieee80211_encrypt_fragment( struct sk_buff *frag, int hdr_len); -extern int ieee80211_xmit(struct sk_buff *skb, +extern int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); /* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, @@ -1376,8 +1376,8 @@ extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee); extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); @@ -1385,7 +1385,7 @@ extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct extern void notify_wx_assoc_event(struct ieee80211_device *ieee); extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success); extern void SendDisassociation(struct ieee80211_device *ieee,u8* asSta,u8 asRsn); -extern void ieee80211_start_scan(struct ieee80211_device *ieee); +extern void ieee80211_rtl_start_scan(struct ieee80211_device *ieee); //Add for RF power on power off by lizhaoming 080512 extern void SendDisassociation(struct ieee80211_device *ieee, diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c index f882dd8cf9b..9128c181bc7 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c @@ -469,7 +469,7 @@ drop: /* All received frames are sent to this function. @skb contains the frame in * IEEE 802.11 format, i.e., in the format it was sent over air. * This function is called only as a tasklet (software IRQ). */ -int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats) { struct net_device *dev = ieee->dev; diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c index 1fe19c39d70..c7c645af0eb 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c @@ -689,7 +689,7 @@ void ieee80211_stop_scan(struct ieee80211_device *ieee) } /* called with ieee->lock held */ -void ieee80211_start_scan(struct ieee80211_device *ieee) +void ieee80211_rtl_start_scan(struct ieee80211_device *ieee) { if(IS_DOT11D_ENABLE(ieee) ) { @@ -1196,7 +1196,7 @@ void ieee80211_associate_step1(struct ieee80211_device *ieee) } } -void ieee80211_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) +void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) { u8 *c; struct sk_buff *skb; @@ -1898,7 +1898,7 @@ associate_complete: ieee80211_associate_step2(ieee); }else{ - ieee80211_auth_challenge(ieee, challenge, chlen); + ieee80211_rtl_auth_challenge(ieee, challenge, chlen); } }else{ ieee->softmac_stats.rx_auth_rs_err++; @@ -2047,7 +2047,7 @@ void ieee80211_reset_queue(struct ieee80211_device *ieee) } -void ieee80211_wake_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee) { unsigned long flags; @@ -2089,7 +2089,7 @@ exit : } -void ieee80211_stop_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee) { //unsigned long flags; //spin_lock_irqsave(&ieee->lock,flags); @@ -2301,7 +2301,7 @@ void ieee80211_start_bss(struct ieee80211_device *ieee) //#else if (ieee->state == IEEE80211_NOLINK){ ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } //#endif spin_unlock_irqrestore(&ieee->lock, flags); @@ -2357,7 +2357,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work) if(ieee->state == IEEE80211_NOLINK){ ieee->beinretry = false; ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } //YJ,add,080828, notify os here if(ieee->state == IEEE80211_NOLINK) diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c index dde1f2e0cf3..69bd02164b0 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c @@ -304,7 +304,7 @@ ieee80211_classify(struct sk_buff *skb, struct ieee80211_network *network) } /* SKBs are added to the ieee->tx_queue. */ -int ieee80211_xmit(struct sk_buff *skb, +int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_device *ieee = netdev_priv(dev); diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index 57c62b0a402..e0f13efdb15 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -1811,7 +1811,7 @@ void rtl8180_rx(struct net_device *dev) if(priv->rx_skb->len > 4) skb_trim(priv->rx_skb,priv->rx_skb->len-4); #ifndef RX_DONT_PASS_UL - if(!ieee80211_rx(priv->ieee80211, + if(!ieee80211_rtl_rx(priv->ieee80211, priv->rx_skb, &stats)){ #endif // RX_DONT_PASS_UL @@ -1917,11 +1917,11 @@ rate) if (!check_nic_enought_desc(dev, priority)){ DMESGW("Error: no descriptor left by previous TX (avail %d) ", get_curr_tx_free_desc(dev, priority)); - ieee80211_stop_queue(priv->ieee80211); + ieee80211_rtl_stop_queue(priv->ieee80211); } rtl8180_tx(dev, skb->data, skb->len, priority, morefrag,0,rate); if (!check_nic_enought_desc(dev, priority)) - ieee80211_stop_queue(priv->ieee80211); + ieee80211_rtl_stop_queue(priv->ieee80211); spin_unlock_irqrestore(&priv->tx_lock,flags); } @@ -3680,7 +3680,7 @@ static const struct net_device_ops rtl8180_netdev_ops = { .ndo_set_mac_address = r8180_set_mac_adr, .ndo_validate_addr = eth_validate_addr, .ndo_change_mtu = eth_change_mtu, - .ndo_start_xmit = ieee80211_xmit, + .ndo_start_xmit = ieee80211_rtl_xmit, }; static int __devinit rtl8180_pci_probe(struct pci_dev *pdev, @@ -3900,7 +3900,7 @@ void rtl8180_try_wake_queue(struct net_device *dev, int pri) spin_unlock_irqrestore(&priv->tx_lock,flags); if(enough_desc) - ieee80211_wake_queue(priv->ieee80211); + ieee80211_rtl_wake_queue(priv->ieee80211); } void rtl8180_tx_isr(struct net_device *dev, int pri,short error) diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c index 536cb6e8e79..124cde356cb 100644 --- a/drivers/staging/rtl8187se/r8180_wx.c +++ b/drivers/staging/rtl8187se/r8180_wx.c @@ -377,7 +377,7 @@ static int r8180_wx_set_scan(struct net_device *dev, struct iw_request_info *a, // queue_work(priv->ieee80211->wq, &priv->ieee80211->wx_sync_scan_wq); //printk("start scan============================>\n"); ieee80211_softmac_ips_scan_syncro(priv->ieee80211); -//ieee80211_start_scan(priv->ieee80211); +//ieee80211_rtl_start_scan(priv->ieee80211); /* intentionally forget to up sem */ // up(&priv->ieee80211->wx_sem); ret = 0; diff --git a/drivers/staging/rtl8192e/ieee80211.h b/drivers/staging/rtl8192e/ieee80211.h index 97137ddefff..3ba9e9e90bd 100644 --- a/drivers/staging/rtl8192e/ieee80211.h +++ b/drivers/staging/rtl8192e/ieee80211.h @@ -303,8 +303,8 @@ enum _ReasonCode{ #define ieee80211_rx_mgt ieee80211_rx_mgt_rsl #define ieee80211_get_beacon ieee80211_get_beacon_rsl -#define ieee80211_wake_queue ieee80211_wake_queue_rsl -#define ieee80211_stop_queue ieee80211_stop_queue_rsl +#define ieee80211_rtl_wake_queue ieee80211_rtl_wake_queue_rsl +#define ieee80211_rtl_stop_queue ieee80211_rtl_stop_queue_rsl #define ieee80211_reset_queue ieee80211_reset_queue_rsl #define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rsl #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl @@ -2435,13 +2435,13 @@ extern int ieee80211_encrypt_fragment( struct sk_buff *frag, int hdr_len); -extern int ieee80211_xmit(struct sk_buff *skb, +extern int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); /* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, @@ -2502,8 +2502,8 @@ extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee); extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211.h b/drivers/staging/rtl8192e/ieee80211/ieee80211.h index 83c8452de37..aa76390487b 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211.h @@ -333,8 +333,8 @@ enum _ReasonCode{ #define ieee80211_rx_mgt ieee80211_rx_mgt_rsl #define ieee80211_get_beacon ieee80211_get_beacon_rsl -#define ieee80211_wake_queue ieee80211_wake_queue_rsl -#define ieee80211_stop_queue ieee80211_stop_queue_rsl +#define ieee80211_rtl_wake_queue ieee80211_rtl_wake_queue_rsl +#define ieee80211_rtl_stop_queue ieee80211_rtl_stop_queue_rsl #define ieee80211_reset_queue ieee80211_reset_queue_rsl #define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rsl #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl @@ -2546,13 +2546,13 @@ extern int ieee80211_encrypt_fragment( struct sk_buff *frag, int hdr_len); -extern int ieee80211_xmit(struct sk_buff *skb, +extern int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); /* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, @@ -2613,8 +2613,8 @@ extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee); extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c index 2644155737a..f43a7db5c78 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c @@ -119,7 +119,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv) ieee = (struct ieee80211_device *)dev->priv; #endif #if 0 - dev->hard_start_xmit = ieee80211_xmit; + dev->hard_start_xmit = ieee80211_rtl_xmit; #endif memset(ieee, 0, sizeof(struct ieee80211_device)+sizeof_priv); @@ -333,7 +333,7 @@ extern void ieee80211_crypto_ccmp_exit(void); extern int ieee80211_crypto_wep_init(void); extern void ieee80211_crypto_wep_exit(void); -int __init ieee80211_init(void) +int __init ieee80211_rtl_init(void) { struct proc_dir_entry *e; int retval; @@ -389,7 +389,7 @@ int __init ieee80211_init(void) return 0; } -void __exit ieee80211_exit(void) +void __exit ieee80211_rtl_exit(void) { if (ieee80211_proc) { remove_proc_entry("debug_level", ieee80211_proc); @@ -412,8 +412,8 @@ module_param(debug, int, 0444); MODULE_PARM_DESC(debug, "debug output mask"); -//module_exit(ieee80211_exit); -//module_init(ieee80211_init); +//module_exit(ieee80211_rtl_exit); +//module_init(ieee80211_rtl_init); #endif #endif diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c index 5dc478b8637..06d91715143 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c @@ -923,7 +923,7 @@ u8 parse_subframe(struct sk_buff *skb, /* All received frames are sent to this function. @skb contains the frame in * IEEE 802.11 format, i.e., in the format it was sent over air. * This function is called only as a tasklet (software IRQ). */ -int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats) { struct net_device *dev = ieee->dev; diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c index 593d2282518..6d1ddec39f0 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c @@ -684,7 +684,7 @@ void ieee80211_stop_scan(struct ieee80211_device *ieee) } /* called with ieee->lock held */ -void ieee80211_start_scan(struct ieee80211_device *ieee) +void ieee80211_rtl_start_scan(struct ieee80211_device *ieee) { #ifdef ENABLE_DOT11D if(IS_DOT11D_ENABLE(ieee) ) @@ -1430,7 +1430,7 @@ void ieee80211_associate_step1(struct ieee80211_device *ieee) } } -void ieee80211_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) +void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) { u8 *c; struct sk_buff *skb; @@ -2262,7 +2262,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, ieee80211_associate_step2(ieee); }else{ - ieee80211_auth_challenge(ieee, challenge, chlen); + ieee80211_rtl_auth_challenge(ieee, challenge, chlen); } }else{ ieee->softmac_stats.rx_auth_rs_err++; @@ -2376,7 +2376,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device * * to check it any more. * */ //printk("error:no descriptor left@queue_index %d\n", queue_index); - //ieee80211_stop_queue(ieee); + //ieee80211_rtl_stop_queue(ieee); #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE skb_queue_tail(&ieee->skb_drv_aggQ[queue_index], txb->fragments[i]); #else @@ -2440,7 +2440,7 @@ void ieee80211_reset_queue(struct ieee80211_device *ieee) } -void ieee80211_wake_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee) { unsigned long flags; @@ -2481,7 +2481,7 @@ exit : } -void ieee80211_stop_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee) { //unsigned long flags; //spin_lock_irqsave(&ieee->lock,flags); @@ -2706,7 +2706,7 @@ void ieee80211_start_bss(struct ieee80211_device *ieee) if (ieee->state == IEEE80211_NOLINK){ ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } spin_unlock_irqrestore(&ieee->lock, flags); } @@ -2775,7 +2775,7 @@ void ieee80211_associate_retry_wq(struct ieee80211_device *ieee) { ieee->is_roaming= false; ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } spin_unlock_irqrestore(&ieee->lock, flags); @@ -3497,8 +3497,8 @@ void notify_wx_assoc_event(struct ieee80211_device *ieee) #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) //EXPORT_SYMBOL(ieee80211_get_beacon); -//EXPORT_SYMBOL(ieee80211_wake_queue); -//EXPORT_SYMBOL(ieee80211_stop_queue); +//EXPORT_SYMBOL(ieee80211_rtl_wake_queue); +//EXPORT_SYMBOL(ieee80211_rtl_stop_queue); //EXPORT_SYMBOL(ieee80211_reset_queue); //EXPORT_SYMBOL(ieee80211_softmac_stop_protocol); //EXPORT_SYMBOL(ieee80211_softmac_start_protocol); @@ -3518,8 +3518,8 @@ void notify_wx_assoc_event(struct ieee80211_device *ieee) //EXPORT_SYMBOL(ieee80211_start_scan_syncro); #else EXPORT_SYMBOL_NOVERS(ieee80211_get_beacon); -EXPORT_SYMBOL_NOVERS(ieee80211_wake_queue); -EXPORT_SYMBOL_NOVERS(ieee80211_stop_queue); +EXPORT_SYMBOL_NOVERS(ieee80211_rtl_wake_queue); +EXPORT_SYMBOL_NOVERS(ieee80211_rtl_stop_queue); EXPORT_SYMBOL_NOVERS(ieee80211_reset_queue); EXPORT_SYMBOL_NOVERS(ieee80211_softmac_stop_protocol); EXPORT_SYMBOL_NOVERS(ieee80211_softmac_start_protocol); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c index 103b33c093f..798fb4154c2 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c @@ -604,7 +604,7 @@ void ieee80211_query_seqnum(struct ieee80211_device*ieee, struct sk_buff* skb, u } } -int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) +int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev) { #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)) struct ieee80211_device *ieee = netdev_priv(dev); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c index 4e34a1f4c66..3441b72dd8f 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c @@ -976,7 +976,7 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len) { if (len != ie[1]+2) { - printk("len:%d, ie:%d\n", len, ie[1]); + printk("len:%zu, ie:%d\n", len, ie[1]); return -EINVAL; } buf = kmalloc(len, GFP_KERNEL); diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c index 98b3bb6b6d6..e41e8a0c739 100644 --- a/drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c +++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c @@ -382,7 +382,7 @@ int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } @@ -481,7 +481,7 @@ int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } rsp = ( struct ieee80211_hdr_3addr*)skb->data; @@ -611,7 +611,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 6) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); return -1; } diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c index ff8fe7e32a9..0ca5d8b4f74 100644 --- a/drivers/staging/rtl8192e/r8192E_core.c +++ b/drivers/staging/rtl8192e/r8192E_core.c @@ -5795,7 +5795,7 @@ static void rtl8192_rx(struct net_device *dev) stats.fragoffset = 0; stats.ntotalfrag = 1; - if(!ieee80211_rx(priv->ieee80211, skb, &stats)){ + if(!ieee80211_rtl_rx(priv->ieee80211, skb, &stats)){ dev_kfree_skb_any(skb); } else { priv->stats.rxok++; @@ -5837,7 +5837,7 @@ static const struct net_device_ops rtl8192_netdev_ops = { .ndo_do_ioctl = rtl8192_ioctl, .ndo_set_multicast_list = r8192_set_multicast, .ndo_set_mac_address = r8192_set_mac_adr, - .ndo_start_xmit = ieee80211_xmit, + .ndo_start_xmit = ieee80211_rtl_xmit, }; /**************************************************************************** @@ -6121,14 +6121,14 @@ static void __devexit rtl8192_pci_disconnect(struct pci_dev *pdev) RT_TRACE(COMP_DOWN, "wlan driver removed\n"); } -extern int ieee80211_init(void); -extern void ieee80211_exit(void); +extern int ieee80211_rtl_init(void); +extern void ieee80211_rtl_exit(void); static int __init rtl8192_pci_module_init(void) { int retval; - retval = ieee80211_init(); + retval = ieee80211_rtl_init(); if (retval) return retval; @@ -6153,7 +6153,7 @@ static void __exit rtl8192_pci_module_exit(void) RT_TRACE(COMP_DOWN, "Exiting"); rtl8192_proc_module_remove(); - ieee80211_exit(); + ieee80211_rtl_exit(); } //warning message WB @@ -6313,7 +6313,7 @@ void rtl8192_try_wake_queue(struct net_device *dev, int pri) spin_unlock_irqrestore(&priv->tx_lock,flags); if(enough_desc) - ieee80211_wake_queue(priv->ieee80211); + ieee80211_rtl_wake_queue(priv->ieee80211); #endif } diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211.h b/drivers/staging/rtl8192su/ieee80211/ieee80211.h index f22d024b1c3..9a4c858b066 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211.h @@ -1721,13 +1721,13 @@ extern int ieee80211_encrypt_fragment( struct sk_buff *frag, int hdr_len); -extern int rtl8192_ieee80211_xmit(struct sk_buff *skb, +extern int rtl8192_ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); /* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, @@ -1783,8 +1783,8 @@ extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee); extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c index ac223cef1d3..fecfa120ff4 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c @@ -208,7 +208,7 @@ static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee, * * Responsible for handling management control frames * - * Called by ieee80211_rx */ + * Called by ieee80211_rtl_rx */ static inline int ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats, u16 type, @@ -289,7 +289,7 @@ static int ieee80211_is_eapol_frame(struct ieee80211_device *ieee, return 0; } -/* Called only as a tasklet (software IRQ), by ieee80211_rx */ +/* Called only as a tasklet (software IRQ), by ieee80211_rtl_rx */ static inline int ieee80211_rx_frame_decrypt(struct ieee80211_device* ieee, struct sk_buff *skb, struct ieee80211_crypt_data *crypt) @@ -858,7 +858,7 @@ u8 parse_subframe(struct sk_buff *skb, /* All received frames are sent to this function. @skb contains the frame in * IEEE 802.11 format, i.e., in the format it was sent over air. * This function is called only as a tasklet (software IRQ). */ -int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats) { struct net_device *dev = ieee->dev; diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c index 203c0a5cc8c..95d4f84dcf3 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c @@ -610,7 +610,7 @@ void ieee80211_stop_scan(struct ieee80211_device *ieee) } /* called with ieee->lock held */ -void ieee80211_start_scan(struct ieee80211_device *ieee) +void ieee80211_rtl_start_scan(struct ieee80211_device *ieee) { if(IS_DOT11D_ENABLE(ieee) ) { @@ -1281,7 +1281,7 @@ void ieee80211_associate_step1(struct ieee80211_device *ieee) } } -void ieee80211_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) +void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) { u8 *c; struct sk_buff *skb; @@ -2054,7 +2054,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, ieee80211_associate_step2(ieee); }else{ - ieee80211_auth_challenge(ieee, challenge, chlen); + ieee80211_rtl_auth_challenge(ieee, challenge, chlen); } }else{ ieee->softmac_stats.rx_auth_rs_err++; @@ -2162,7 +2162,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device * * to check it any more. * */ //printk("error:no descriptor left@queue_index %d, %d, %d\n", queue_index, skb_queue_len(&ieee->skb_waitQ[queue_index]), ieee->check_nic_enough_desc(ieee->dev,queue_index)); - //ieee80211_stop_queue(ieee); + //ieee80211_rtl_stop_queue(ieee); skb_queue_tail(&ieee->skb_waitQ[queue_index], txb->fragments[i]); }else{ ieee->softmac_data_hard_start_xmit( @@ -2222,7 +2222,7 @@ void ieee80211_reset_queue(struct ieee80211_device *ieee) } -void ieee80211_wake_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee) { unsigned long flags; @@ -2263,7 +2263,7 @@ exit : } -void ieee80211_stop_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee) { //unsigned long flags; //spin_lock_irqsave(&ieee->lock,flags); @@ -2479,7 +2479,7 @@ void ieee80211_start_bss(struct ieee80211_device *ieee) if (ieee->state == IEEE80211_NOLINK){ ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } spin_unlock_irqrestore(&ieee->lock, flags); } @@ -2552,7 +2552,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work) if(ieee->state == IEEE80211_NOLINK) { ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } spin_unlock_irqrestore(&ieee->lock, flags); diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c index 60621d6b2a6..4d54e1e62d2 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c @@ -604,7 +604,7 @@ void ieee80211_query_seqnum(struct ieee80211_device*ieee, struct sk_buff* skb, u } } -int rtl8192_ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) +int rtl8192_ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_device *ieee = netdev_priv(dev); struct ieee80211_txb *txb = NULL; diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c index 66274d7666f..ccb9d5b8cd4 100644 --- a/drivers/staging/rtl8192su/r8192U_core.c +++ b/drivers/staging/rtl8192su/r8192U_core.c @@ -126,6 +126,8 @@ static struct usb_device_id rtl8192_usb_id_tbl[] = { {USB_DEVICE(0x2001, 0x3301)}, /* Zinwell */ {USB_DEVICE(0x5a57, 0x0290)}, + /* Guillemot */ + {USB_DEVICE(0x06f8, 0xe031)}, //92SU {USB_DEVICE(0x0bda, 0x8172)}, {} @@ -1501,7 +1503,7 @@ static void rtl8192_rx_isr(struct urb *urb) urb->context = skb; skb_queue_tail(&priv->rx_queue, skb); err = usb_submit_urb(urb, GFP_ATOMIC); - if(err && err != EPERM) + if(err && err != -EPERM) printk("can not submit rxurb, err is %x,URB status is %x\n",err,urb->status); } @@ -7155,7 +7157,7 @@ void rtl8192SU_rx_nomal(struct sk_buff* skb) unicast_packet = true; } - if(!ieee80211_rx(priv->ieee80211,skb, &stats)) { + if(!ieee80211_rtl_rx(priv->ieee80211,skb, &stats)) { dev_kfree_skb_any(skb); } else { // priv->stats.rxoktotal++; //YJ,test,090108 @@ -7426,7 +7428,7 @@ static const struct net_device_ops rtl8192_netdev_ops = { .ndo_set_mac_address = r8192_set_mac_adr, .ndo_validate_addr = eth_validate_addr, .ndo_change_mtu = eth_change_mtu, - .ndo_start_xmit = rtl8192_ieee80211_xmit, + .ndo_start_xmit = rtl8192_ieee80211_rtl_xmit, }; static int __devinit rtl8192_usb_probe(struct usb_interface *intf, @@ -7619,7 +7621,7 @@ void rtl8192_try_wake_queue(struct net_device *dev, int pri) spin_unlock_irqrestore(&priv->tx_lock,flags); if(enough_desc) - ieee80211_wake_queue(priv->ieee80211); + ieee80211_rtl_wake_queue(priv->ieee80211); } void EnableHWSecurityConfig8192(struct net_device *dev) diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c index d397f1d68eb..5f12d62658c 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c @@ -845,7 +845,7 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len) { if (len != ie[1]+2) { - printk("len:%d, ie:%d\n", len, ie[1]); + printk("len:%zu, ie:%d\n", len, ie[1]); return -EINVAL; } buf = kmalloc(len, GFP_KERNEL); diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c index 26af43bb839..512a57aebde 100644 --- a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c +++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c @@ -340,7 +340,7 @@ int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } @@ -439,7 +439,7 @@ int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } rsp = ( struct ieee80211_hdr_3addr*)skb->data; @@ -569,7 +569,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 6) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); return -1; } diff --git a/drivers/staging/sm7xx/Kconfig b/drivers/staging/sm7xx/Kconfig new file mode 100644 index 00000000000..204dbfc3c38 --- /dev/null +++ b/drivers/staging/sm7xx/Kconfig @@ -0,0 +1,15 @@ +config FB_SM7XX + tristate "Silicon Motion SM7XX Frame Buffer Support" + depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Frame Buffer driver for the Silicon Motion SM7XX serial graphic card. + +config FB_SM7XX_ACCEL + bool "Siliconmotion Acceleration functions (EXPERIMENTAL)" + depends on FB_SM7XX && EXPERIMENTAL + help + This will compile the Trident frame buffer device with + acceleration functions. diff --git a/drivers/staging/sm7xx/Makefile b/drivers/staging/sm7xx/Makefile new file mode 100644 index 00000000000..f43cb910630 --- /dev/null +++ b/drivers/staging/sm7xx/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_FB_SM7XX) += sm7xx.o + +sm7xx-y := smtcfb.o diff --git a/drivers/staging/sm7xx/TODO b/drivers/staging/sm7xx/TODO new file mode 100644 index 00000000000..1f61f5e11cf --- /dev/null +++ b/drivers/staging/sm7xx/TODO @@ -0,0 +1,10 @@ +TODO: +- Dual head support +- use kernel coding style +- checkpatch.pl clean +- refine the code and remove unused code +- use kernel framebuffer mode setting instead of hard code +- move it to drivers/video/sm7xx/ or make it be drivers/video/sm7xxfb.c + +Please send any patches to Greg Kroah-Hartman <greg@kroah.com> and +Teddy Wang <teddy.wang@siliconmotion.com.cn>. diff --git a/drivers/staging/sm7xx/smtc2d.c b/drivers/staging/sm7xx/smtc2d.c new file mode 100644 index 00000000000..133b86c6a67 --- /dev/null +++ b/drivers/staging/sm7xx/smtc2d.c @@ -0,0 +1,979 @@ +/* + * Silicon Motion SM7XX 2D drawing engine functions. + * + * Copyright (C) 2006 Silicon Motion Technology Corp. + * Author: Boyod boyod.yang@siliconmotion.com.cn + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Version 0.10.26192.21.01 + * - Add PowerPC support + * - Add 2D support for Lynx - + * Verified on 2.6.19.2 + * Boyod.yang <boyod.yang@siliconmotion.com.cn> + */ + +unsigned char smtc_de_busy; + +void SMTC_write2Dreg(unsigned long nOffset, unsigned long nData) +{ + writel(nData, smtc_2DBaseAddress + nOffset); +} + +unsigned long SMTC_read2Dreg(unsigned long nOffset) +{ + return readl(smtc_2DBaseAddress + nOffset); +} + +void SMTC_write2Ddataport(unsigned long nOffset, unsigned long nData) +{ + writel(nData, smtc_2Ddataport + nOffset); +} + +/********************************************************************** + * + * deInit + * + * Purpose + * Drawing engine initialization. + * + **********************************************************************/ + +void deInit(unsigned int nModeWidth, unsigned int nModeHeight, + unsigned int bpp) +{ + /* Get current power configuration. */ + unsigned char clock; + clock = smtc_seqr(0x21); + + /* initialize global 'mutex lock' variable */ + smtc_de_busy = 0; + + /* Enable 2D Drawing Engine */ + smtc_seqw(0x21, clock & 0xF8); + + SMTC_write2Dreg(DE_CLIP_TL, + FIELD_VALUE(0, DE_CLIP_TL, TOP, 0) | + FIELD_SET(0, DE_CLIP_TL, STATUS, DISABLE) | + FIELD_SET(0, DE_CLIP_TL, INHIBIT, OUTSIDE) | + FIELD_VALUE(0, DE_CLIP_TL, LEFT, 0)); + + if (bpp >= 24) { + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + nModeWidth * 3) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + nModeWidth + * 3)); + } else { + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + nModeWidth) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + nModeWidth)); + } + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + nModeWidth) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + nModeWidth)); + + switch (bpp) { + case 8: + SMTC_write2Dreg(DE_STRETCH_FORMAT, + FIELD_SET(0, DE_STRETCH_FORMAT, PATTERN_XY, + NORMAL) | FIELD_VALUE(0, + DE_STRETCH_FORMAT, + PATTERN_Y, + 0) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, PATTERN_X, + 0) | FIELD_SET(0, DE_STRETCH_FORMAT, + PIXEL_FORMAT, + 8) | FIELD_SET(0, + DE_STRETCH_FORMAT, + ADDRESSING, + XY) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, + SOURCE_HEIGHT, 3)); + break; + case 24: + SMTC_write2Dreg(DE_STRETCH_FORMAT, + FIELD_SET(0, DE_STRETCH_FORMAT, PATTERN_XY, + NORMAL) | FIELD_VALUE(0, + DE_STRETCH_FORMAT, + PATTERN_Y, + 0) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, PATTERN_X, + 0) | FIELD_SET(0, DE_STRETCH_FORMAT, + PIXEL_FORMAT, + 24) | FIELD_SET(0, + DE_STRETCH_FORMAT, + ADDRESSING, + XY) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, + SOURCE_HEIGHT, 3)); + break; + case 16: + default: + SMTC_write2Dreg(DE_STRETCH_FORMAT, + FIELD_SET(0, DE_STRETCH_FORMAT, PATTERN_XY, + NORMAL) | FIELD_VALUE(0, + DE_STRETCH_FORMAT, + PATTERN_Y, + 0) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, PATTERN_X, + 0) | FIELD_SET(0, DE_STRETCH_FORMAT, + PIXEL_FORMAT, + 16) | FIELD_SET(0, + DE_STRETCH_FORMAT, + ADDRESSING, + XY) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, + SOURCE_HEIGHT, 3)); + break; + } + + SMTC_write2Dreg(DE_MASKS, + FIELD_VALUE(0, DE_MASKS, BYTE_MASK, 0xFFFF) | + FIELD_VALUE(0, DE_MASKS, BIT_MASK, 0xFFFF)); + SMTC_write2Dreg(DE_COLOR_COMPARE_MASK, + FIELD_VALUE(0, DE_COLOR_COMPARE_MASK, MASKS, \ + 0xFFFFFF)); + SMTC_write2Dreg(DE_COLOR_COMPARE, + FIELD_VALUE(0, DE_COLOR_COMPARE, COLOR, 0xFFFFFF)); +} + +void deVerticalLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX, + unsigned long nY, + unsigned long dst_height, unsigned long nColor) +{ + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS, + dst_base)); + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, dst_pitch) | + FIELD_VALUE(0, DE_PITCH, SOURCE, dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, nX) | + FIELD_VALUE(0, DE_DESTINATION, Y, nY)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, 1) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, dst_height)); + + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(0, DE_CONTROL, STATUS, START) | + FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT) | + FIELD_SET(0, DE_CONTROL, MAJOR, Y) | + FIELD_SET(0, DE_CONTROL, STEP_X, NEGATIVE) | + FIELD_SET(0, DE_CONTROL, STEP_Y, POSITIVE) | + FIELD_SET(0, DE_CONTROL, LAST_PIXEL, OFF) | + FIELD_SET(0, DE_CONTROL, COMMAND, SHORT_STROKE) | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_VALUE(0, DE_CONTROL, ROP, 0x0C)); + + smtc_de_busy = 1; +} + +void deHorizontalLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX, + unsigned long nY, + unsigned long dst_width, unsigned long nColor) +{ + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS, + dst_base)); + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, dst_pitch) | + FIELD_VALUE(0, DE_PITCH, SOURCE, dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, + DISABLE) | FIELD_VALUE(0, DE_DESTINATION, X, + nX) | FIELD_VALUE(0, + DE_DESTINATION, + Y, + nY)); + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, + dst_width) | FIELD_VALUE(0, DE_DIMENSION, + Y_ET, 1)); + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(0, DE_CONTROL, STATUS, START) | FIELD_SET(0, + DE_CONTROL, + DIRECTION, + RIGHT_TO_LEFT) + | FIELD_SET(0, DE_CONTROL, MAJOR, X) | FIELD_SET(0, + DE_CONTROL, + STEP_X, + POSITIVE) + | FIELD_SET(0, DE_CONTROL, STEP_Y, + NEGATIVE) | FIELD_SET(0, DE_CONTROL, + LAST_PIXEL, + OFF) | FIELD_SET(0, + DE_CONTROL, + COMMAND, + SHORT_STROKE) + | FIELD_SET(0, DE_CONTROL, ROP_SELECT, + ROP2) | FIELD_VALUE(0, DE_CONTROL, ROP, + 0x0C)); + + smtc_de_busy = 1; +} + +void deLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX1, + unsigned long nY1, + unsigned long nX2, unsigned long nY2, unsigned long nColor) +{ + unsigned long nCommand = + FIELD_SET(0, DE_CONTROL, STATUS, START) | + FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT) | + FIELD_SET(0, DE_CONTROL, MAJOR, X) | + FIELD_SET(0, DE_CONTROL, STEP_X, POSITIVE) | + FIELD_SET(0, DE_CONTROL, STEP_Y, POSITIVE) | + FIELD_SET(0, DE_CONTROL, LAST_PIXEL, OFF) | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_VALUE(0, DE_CONTROL, ROP, 0x0C); + unsigned long DeltaX; + unsigned long DeltaY; + + /* Calculate delta X */ + if (nX1 <= nX2) + DeltaX = nX2 - nX1; + else { + DeltaX = nX1 - nX2; + nCommand = FIELD_SET(nCommand, DE_CONTROL, STEP_X, NEGATIVE); + } + + /* Calculate delta Y */ + if (nY1 <= nY2) + DeltaY = nY2 - nY1; + else { + DeltaY = nY1 - nY2; + nCommand = FIELD_SET(nCommand, DE_CONTROL, STEP_Y, NEGATIVE); + } + + /* Determine the major axis */ + if (DeltaX < DeltaY) + nCommand = FIELD_SET(nCommand, DE_CONTROL, MAJOR, Y); + + /* Vertical line? */ + if (nX1 == nX2) + deVerticalLine(dst_base, dst_pitch, nX1, nY1, DeltaY, nColor); + + /* Horizontal line? */ + else if (nY1 == nY2) + deHorizontalLine(dst_base, dst_pitch, nX1, nY1, \ + DeltaX, nColor); + + /* Diagonal line? */ + else if (DeltaX == DeltaY) { + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, + ADDRESS, dst_base)); + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, 1) | + FIELD_VALUE(0, DE_DESTINATION, Y, nY1)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, 1) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, DeltaX)); + + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(nCommand, DE_CONTROL, COMMAND, + SHORT_STROKE)); + } + + /* Generic line */ + else { + unsigned int k1, k2, et, w; + if (DeltaX < DeltaY) { + k1 = 2 * DeltaX; + et = k1 - DeltaY; + k2 = et - DeltaY; + w = DeltaY + 1; + } else { + k1 = 2 * DeltaY; + et = k1 - DeltaX; + k2 = et - DeltaX; + w = DeltaX + 1; + } + + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, + ADDRESS, dst_base)); + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + + SMTC_write2Dreg(DE_SOURCE, + FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) | + FIELD_VALUE(0, DE_SOURCE, X_K1, k1) | + FIELD_VALUE(0, DE_SOURCE, Y_K2, k2)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, nX1) | + FIELD_VALUE(0, DE_DESTINATION, Y, nY1)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, w) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, et)); + + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(nCommand, DE_CONTROL, COMMAND, + LINE_DRAW)); + } + + smtc_de_busy = 1; +} + +void deFillRect(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long dst_X, + unsigned long dst_Y, + unsigned long dst_width, + unsigned long dst_height, unsigned long nColor) +{ + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS, + dst_base)); + + if (dst_pitch) { + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + } + + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, dst_X) | + FIELD_VALUE(0, DE_DESTINATION, Y, dst_Y)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, dst_width) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, dst_height)); + + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(0, DE_CONTROL, STATUS, START) | + FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT) | + FIELD_SET(0, DE_CONTROL, LAST_PIXEL, OFF) | + FIELD_SET(0, DE_CONTROL, COMMAND, RECTANGLE_FILL) | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_VALUE(0, DE_CONTROL, ROP, 0x0C)); + + smtc_de_busy = 1; +} + +/********************************************************************** + * + * deRotatePattern + * + * Purpose + * Rotate the given pattern if necessary + * + * Parameters + * [in] + * pPattern - Pointer to DE_SURFACE structure containing + * pattern attributes + * patternX - X position (0-7) of pattern origin + * patternY - Y position (0-7) of pattern origin + * + * [out] + * pattern_dstaddr - Pointer to pre-allocated buffer containing + * rotated pattern + * + **********************************************************************/ +void deRotatePattern(unsigned char *pattern_dstaddr, + unsigned long pattern_src_addr, + unsigned long pattern_BPP, + unsigned long pattern_stride, int patternX, int patternY) +{ + unsigned int i; + unsigned long pattern[PATTERN_WIDTH * PATTERN_HEIGHT]; + unsigned int x, y; + unsigned char *pjPatByte; + + if (pattern_dstaddr != NULL) { + deWaitForNotBusy(); + + if (patternX || patternY) { + /* Rotate pattern */ + pjPatByte = (unsigned char *)pattern; + + switch (pattern_BPP) { + case 8: + { + for (y = 0; y < 8; y++) { + unsigned char *pjBuffer = + pattern_dstaddr + + ((patternY + y) & 7) * 8; + for (x = 0; x < 8; x++) { + pjBuffer[(patternX + + x) & 7] = + pjPatByte[x]; + } + pjPatByte += pattern_stride; + } + break; + } + + case 16: + { + for (y = 0; y < 8; y++) { + unsigned short *pjBuffer = + (unsigned short *) + pattern_dstaddr + + ((patternY + y) & 7) * 8; + for (x = 0; x < 8; x++) { + pjBuffer[(patternX + + x) & 7] = + ((unsigned short *) + pjPatByte)[x]; + } + pjPatByte += pattern_stride; + } + break; + } + + case 32: + { + for (y = 0; y < 8; y++) { + unsigned long *pjBuffer = + (unsigned long *) + pattern_dstaddr + + ((patternY + y) & 7) * 8; + for (x = 0; x < 8; x++) { + pjBuffer[(patternX + + x) & 7] = + ((unsigned long *) + pjPatByte)[x]; + } + pjPatByte += pattern_stride; + } + break; + } + } + } else { + /*Don't rotate,just copy pattern into pattern_dstaddr*/ + for (i = 0; i < (pattern_BPP * 2); i++) { + ((unsigned long *)pattern_dstaddr)[i] = + pattern[i]; + } + } + + } +} + +/********************************************************************** + * + * deCopy + * + * Purpose + * Copy a rectangular area of the source surface to a destination surface + * + * Remarks + * Source bitmap must have the same color depth (BPP) as the destination + * bitmap. + * +**********************************************************************/ +void deCopy(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long dst_BPP, + unsigned long dst_X, + unsigned long dst_Y, + unsigned long dst_width, + unsigned long dst_height, + unsigned long src_base, + unsigned long src_pitch, + unsigned long src_X, + unsigned long src_Y, pTransparent pTransp, unsigned char nROP2) +{ + unsigned long nDirection = 0; + unsigned long nTransparent = 0; + /* Direction of ROP2 operation: + * 1 = Left to Right, + * (-1) = Right to Left + */ + unsigned long opSign = 1; + /* xWidth is in pixels */ + unsigned long xWidth = 192 / (dst_BPP / 8); + unsigned long de_ctrl = 0; + + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS, + dst_base)); + + SMTC_write2Dreg(DE_WINDOW_SOURCE_BASE, + FIELD_VALUE(0, DE_WINDOW_SOURCE_BASE, ADDRESS, + src_base)); + + if (dst_pitch && src_pitch) { + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + src_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + src_pitch)); + } + + /* Set transparent bits if necessary */ + if (pTransp != NULL) { + nTransparent = + pTransp->match | pTransp->select | pTransp->control; + + /* Set color compare register */ + SMTC_write2Dreg(DE_COLOR_COMPARE, + FIELD_VALUE(0, DE_COLOR_COMPARE, COLOR, + pTransp->color)); + } + + /* Determine direction of operation */ + if (src_Y < dst_Y) { + /* +----------+ + |S | + | +----------+ + | | | | + | | | | + +---|------+ | + | D | + +----------+ */ + + nDirection = BOTTOM_TO_TOP; + } else if (src_Y > dst_Y) { + /* +----------+ + |D | + | +----------+ + | | | | + | | | | + +---|------+ | + | S | + +----------+ */ + + nDirection = TOP_TO_BOTTOM; + } else { + /* src_Y == dst_Y */ + + if (src_X <= dst_X) { + /* +------+---+------+ + |S | | D| + | | | | + | | | | + | | | | + +------+---+------+ */ + + nDirection = RIGHT_TO_LEFT; + } else { + /* src_X > dst_X */ + + /* +------+---+------+ + |D | | S| + | | | | + | | | | + | | | | + +------+---+------+ */ + + nDirection = LEFT_TO_RIGHT; + } + } + + if ((nDirection == BOTTOM_TO_TOP) || (nDirection == RIGHT_TO_LEFT)) { + src_X += dst_width - 1; + src_Y += dst_height - 1; + dst_X += dst_width - 1; + dst_Y += dst_height - 1; + opSign = (-1); + } + + if (dst_BPP >= 24) { + src_X *= 3; + src_Y *= 3; + dst_X *= 3; + dst_Y *= 3; + dst_width *= 3; + if ((nDirection == BOTTOM_TO_TOP) + || (nDirection == RIGHT_TO_LEFT)) { + src_X += 2; + dst_X += 2; + } + } + + /* Workaround for 192 byte hw bug */ + if ((nROP2 != 0x0C) && ((dst_width * (dst_BPP / 8)) >= 192)) { + /* + * Perform the ROP2 operation in chunks of (xWidth * + * dst_height) + */ + while (1) { + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_SOURCE, + FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) | + FIELD_VALUE(0, DE_SOURCE, X_K1, src_X) | + FIELD_VALUE(0, DE_SOURCE, Y_K2, src_Y)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, + DISABLE) | FIELD_VALUE(0, + DE_DESTINATION, + X, + dst_X) + | FIELD_VALUE(0, DE_DESTINATION, Y, + dst_Y)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, + xWidth) | FIELD_VALUE(0, + DE_DIMENSION, + Y_ET, + dst_height)); + + de_ctrl = + FIELD_VALUE(0, DE_CONTROL, ROP, + nROP2) | nTransparent | FIELD_SET(0, + DE_CONTROL, + ROP_SELECT, + ROP2) + | FIELD_SET(0, DE_CONTROL, COMMAND, + BITBLT) | ((nDirection == + 1) ? FIELD_SET(0, + DE_CONTROL, + DIRECTION, + RIGHT_TO_LEFT) + : FIELD_SET(0, DE_CONTROL, + DIRECTION, + LEFT_TO_RIGHT)) | + FIELD_SET(0, DE_CONTROL, STATUS, START); + + SMTC_write2Dreg(DE_CONTROL, de_ctrl); + + src_X += (opSign * xWidth); + dst_X += (opSign * xWidth); + dst_width -= xWidth; + + if (dst_width <= 0) { + /* ROP2 operation is complete */ + break; + } + + if (xWidth > dst_width) + xWidth = dst_width; + } + } else { + deWaitForNotBusy(); + SMTC_write2Dreg(DE_SOURCE, + FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) | + FIELD_VALUE(0, DE_SOURCE, X_K1, src_X) | + FIELD_VALUE(0, DE_SOURCE, Y_K2, src_Y)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, dst_X) | + FIELD_VALUE(0, DE_DESTINATION, Y, dst_Y)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, dst_width) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, dst_height)); + + de_ctrl = FIELD_VALUE(0, DE_CONTROL, ROP, nROP2) | + nTransparent | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_SET(0, DE_CONTROL, COMMAND, BITBLT) | + ((nDirection == 1) ? FIELD_SET(0, DE_CONTROL, DIRECTION, + RIGHT_TO_LEFT) + : FIELD_SET(0, DE_CONTROL, DIRECTION, + LEFT_TO_RIGHT)) | FIELD_SET(0, DE_CONTROL, + STATUS, START); + SMTC_write2Dreg(DE_CONTROL, de_ctrl); + } + + smtc_de_busy = 1; +} + +/* + * This function sets the pixel format that will apply to the 2D Engine. + */ +void deSetPixelFormat(unsigned long bpp) +{ + unsigned long de_format; + + de_format = SMTC_read2Dreg(DE_STRETCH_FORMAT); + + switch (bpp) { + case 8: + de_format = + FIELD_SET(de_format, DE_STRETCH_FORMAT, PIXEL_FORMAT, 8); + break; + default: + case 16: + de_format = + FIELD_SET(de_format, DE_STRETCH_FORMAT, PIXEL_FORMAT, 16); + break; + case 32: + de_format = + FIELD_SET(de_format, DE_STRETCH_FORMAT, PIXEL_FORMAT, 32); + break; + } + + SMTC_write2Dreg(DE_STRETCH_FORMAT, de_format); +} + +/* + * System memory to Video memory monochrome expansion. + * + * Source is monochrome image in system memory. This function expands the + * monochrome data to color image in video memory. + */ + +long deSystemMem2VideoMemMonoBlt(const char *pSrcbuf, + long srcDelta, + unsigned long startBit, + unsigned long dBase, + unsigned long dPitch, + unsigned long bpp, + unsigned long dx, unsigned long dy, + unsigned long width, unsigned long height, + unsigned long fColor, + unsigned long bColor, + unsigned long rop2) { + unsigned long bytePerPixel; + unsigned long ulBytesPerScan; + unsigned long ul4BytesPerScan; + unsigned long ulBytesRemain; + unsigned long de_ctrl = 0; + unsigned char ajRemain[4]; + long i, j; + + bytePerPixel = bpp / 8; + + /* Just make sure the start bit is within legal range */ + startBit &= 7; + + ulBytesPerScan = (width + startBit + 7) / 8; + ul4BytesPerScan = ulBytesPerScan & ~3; + ulBytesRemain = ulBytesPerScan & 3; + + if (smtc_de_busy) + deWaitForNotBusy(); + + /* + * 2D Source Base. Use 0 for HOST Blt. + */ + + SMTC_write2Dreg(DE_WINDOW_SOURCE_BASE, 0); + + /* + * 2D Destination Base. + * + * It is an address offset (128 bit aligned) from the beginning of + * frame buffer. + */ + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, dBase); + + if (dPitch) { + + /* + * Program pitch (distance between the 1st points of two + * adjacent lines). + * + * Note that input pitch is BYTE value, but the 2D Pitch + * register uses pixel values. Need Byte to pixel convertion. + */ + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dPitch / + bytePerPixel) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + dPitch / + bytePerPixel)); + + /* Screen Window width in Pixels. + * + * 2D engine uses this value to calculate the linear address in + * frame buffer for a given point. + */ + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + (dPitch / + bytePerPixel)) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + (dPitch + / + bytePerPixel))); + } + /* Note: For 2D Source in Host Write, only X_K1 field is needed, and + * Y_K2 field is not used. For mono bitmap, use startBit for X_K1. + */ + + SMTC_write2Dreg(DE_SOURCE, + FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) | + FIELD_VALUE(0, DE_SOURCE, X_K1, startBit) | + FIELD_VALUE(0, DE_SOURCE, Y_K2, 0)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, dx) | + FIELD_VALUE(0, DE_DESTINATION, Y, dy)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, width) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); + + SMTC_write2Dreg(DE_FOREGROUND, fColor); + SMTC_write2Dreg(DE_BACKGROUND, bColor); + + if (bpp) + deSetPixelFormat(bpp); + /* Set the pixel format of the destination */ + + de_ctrl = FIELD_VALUE(0, DE_CONTROL, ROP, rop2) | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_SET(0, DE_CONTROL, COMMAND, HOST_WRITE) | + FIELD_SET(0, DE_CONTROL, HOST, MONO) | + FIELD_SET(0, DE_CONTROL, STATUS, START); + + SMTC_write2Dreg(DE_CONTROL, de_ctrl | deGetTransparency()); + + /* Write MONO data (line by line) to 2D Engine data port */ + for (i = 0; i < height; i++) { + /* For each line, send the data in chunks of 4 bytes */ + for (j = 0; j < (ul4BytesPerScan / 4); j++) + SMTC_write2Ddataport(0, + *(unsigned long *)(pSrcbuf + + (j * 4))); + + if (ulBytesRemain) { + memcpy(ajRemain, pSrcbuf + ul4BytesPerScan, + ulBytesRemain); + SMTC_write2Ddataport(0, *(unsigned long *)ajRemain); + } + + pSrcbuf += srcDelta; + } + smtc_de_busy = 1; + + return 0; +} + +/* + * This function gets the transparency status from DE_CONTROL register. + * It returns a double word with the transparent fields properly set, + * while other fields are 0. + */ +unsigned long deGetTransparency(void) +{ + unsigned long de_ctrl; + + de_ctrl = SMTC_read2Dreg(DE_CONTROL); + + de_ctrl &= + FIELD_MASK(DE_CONTROL_TRANSPARENCY_MATCH) | + FIELD_MASK(DE_CONTROL_TRANSPARENCY_SELECT) | + FIELD_MASK(DE_CONTROL_TRANSPARENCY); + + return de_ctrl; +} diff --git a/drivers/staging/sm7xx/smtc2d.h b/drivers/staging/sm7xx/smtc2d.h new file mode 100644 index 00000000000..38d0c335322 --- /dev/null +++ b/drivers/staging/sm7xx/smtc2d.h @@ -0,0 +1,530 @@ +/* + * Silicon Motion SM712 2D drawing engine functions. + * + * Copyright (C) 2006 Silicon Motion Technology Corp. + * Author: Ge Wang, gewang@siliconmotion.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef NULL +#define NULL 0 +#endif + +/* Internal macros */ + +#define _F_START(f) (0 ? f) +#define _F_END(f) (1 ? f) +#define _F_SIZE(f) (1 + _F_END(f) - _F_START(f)) +#define _F_MASK(f) (((1ULL << _F_SIZE(f)) - 1) << _F_START(f)) +#define _F_NORMALIZE(v, f) (((v) & _F_MASK(f)) >> _F_START(f)) +#define _F_DENORMALIZE(v, f) (((v) << _F_START(f)) & _F_MASK(f)) + +/* Global macros */ + +#define FIELD_GET(x, reg, field) \ +( \ + _F_NORMALIZE((x), reg ## _ ## field) \ +) + +#define FIELD_SET(x, reg, field, value) \ +( \ + (x & ~_F_MASK(reg ## _ ## field)) \ + | _F_DENORMALIZE(reg ## _ ## field ## _ ## value, reg ## _ ## field) \ +) + +#define FIELD_VALUE(x, reg, field, value) \ +( \ + (x & ~_F_MASK(reg ## _ ## field)) \ + | _F_DENORMALIZE(value, reg ## _ ## field) \ +) + +#define FIELD_CLEAR(reg, field) \ +( \ + ~_F_MASK(reg ## _ ## field) \ +) + +/* Field Macros */ + +#define FIELD_START(field) (0 ? field) +#define FIELD_END(field) (1 ? field) +#define FIELD_SIZE(field) \ + (1 + FIELD_END(field) - FIELD_START(field)) + +#define FIELD_MASK(field) \ + (((1 << (FIELD_SIZE(field)-1)) \ + | ((1 << (FIELD_SIZE(field)-1)) - 1)) \ + << FIELD_START(field)) + +#define FIELD_NORMALIZE(reg, field) \ + (((reg) & FIELD_MASK(field)) >> FIELD_START(field)) + +#define FIELD_DENORMALIZE(field, value) \ + (((value) << FIELD_START(field)) & FIELD_MASK(field)) + +#define FIELD_INIT(reg, field, value) \ + FIELD_DENORMALIZE(reg ## _ ## field, \ + reg ## _ ## field ## _ ## value) + +#define FIELD_INIT_VAL(reg, field, value) \ + (FIELD_DENORMALIZE(reg ## _ ## field, value)) + +#define FIELD_VAL_SET(x, r, f, v) ({ \ + x = (x & ~FIELD_MASK(r ## _ ## f)) \ + | FIELD_DENORMALIZE(r ## _ ## f, r ## _ ## f ## _ ## v) \ +}) + +#define RGB(r, g, b) ((unsigned long)(((r) << 16) | ((g) << 8) | (b))) + +/* Transparent info definition */ +typedef struct { + unsigned long match; /* Matching pixel is OPAQUE/TRANSPARENT */ + unsigned long select; /* Transparency controlled by SRC/DST */ + unsigned long control; /* ENABLE/DISABLE transparency */ + unsigned long color; /* Transparent color */ +} Transparent, *pTransparent; + +#define PIXEL_DEPTH_1_BP 0 /* 1 bit per pixel */ +#define PIXEL_DEPTH_8_BPP 1 /* 8 bits per pixel */ +#define PIXEL_DEPTH_16_BPP 2 /* 16 bits per pixel */ +#define PIXEL_DEPTH_32_BPP 3 /* 32 bits per pixel */ +#define PIXEL_DEPTH_YUV422 8 /* 16 bits per pixel YUV422 */ +#define PIXEL_DEPTH_YUV420 9 /* 16 bits per pixel YUV420 */ + +#define PATTERN_WIDTH 8 +#define PATTERN_HEIGHT 8 + +#define TOP_TO_BOTTOM 0 +#define BOTTOM_TO_TOP 1 +#define RIGHT_TO_LEFT BOTTOM_TO_TOP +#define LEFT_TO_RIGHT TOP_TO_BOTTOM + +/* Constants used in Transparent structure */ +#define MATCH_OPAQUE 0x00000000 +#define MATCH_TRANSPARENT 0x00000400 +#define SOURCE 0x00000000 +#define DESTINATION 0x00000200 + +/* 2D registers. */ + +#define DE_SOURCE 0x000000 +#define DE_SOURCE_WRAP 31 : 31 +#define DE_SOURCE_WRAP_DISABLE 0 +#define DE_SOURCE_WRAP_ENABLE 1 +#define DE_SOURCE_X_K1 29 : 16 +#define DE_SOURCE_Y_K2 15 : 0 + +#define DE_DESTINATION 0x000004 +#define DE_DESTINATION_WRAP 31 : 31 +#define DE_DESTINATION_WRAP_DISABLE 0 +#define DE_DESTINATION_WRAP_ENABLE 1 +#define DE_DESTINATION_X 28 : 16 +#define DE_DESTINATION_Y 15 : 0 + +#define DE_DIMENSION 0x000008 +#define DE_DIMENSION_X 28 : 16 +#define DE_DIMENSION_Y_ET 15 : 0 + +#define DE_CONTROL 0x00000C +#define DE_CONTROL_STATUS 31 : 31 +#define DE_CONTROL_STATUS_STOP 0 +#define DE_CONTROL_STATUS_START 1 +#define DE_CONTROL_PATTERN 30 : 30 +#define DE_CONTROL_PATTERN_MONO 0 +#define DE_CONTROL_PATTERN_COLOR 1 +#define DE_CONTROL_UPDATE_DESTINATION_X 29 : 29 +#define DE_CONTROL_UPDATE_DESTINATION_X_DISABLE 0 +#define DE_CONTROL_UPDATE_DESTINATION_X_ENABLE 1 +#define DE_CONTROL_QUICK_START 28 : 28 +#define DE_CONTROL_QUICK_START_DISABLE 0 +#define DE_CONTROL_QUICK_START_ENABLE 1 +#define DE_CONTROL_DIRECTION 27 : 27 +#define DE_CONTROL_DIRECTION_LEFT_TO_RIGHT 0 +#define DE_CONTROL_DIRECTION_RIGHT_TO_LEFT 1 +#define DE_CONTROL_MAJOR 26 : 26 +#define DE_CONTROL_MAJOR_X 0 +#define DE_CONTROL_MAJOR_Y 1 +#define DE_CONTROL_STEP_X 25 : 25 +#define DE_CONTROL_STEP_X_POSITIVE 1 +#define DE_CONTROL_STEP_X_NEGATIVE 0 +#define DE_CONTROL_STEP_Y 24 : 24 +#define DE_CONTROL_STEP_Y_POSITIVE 1 +#define DE_CONTROL_STEP_Y_NEGATIVE 0 +#define DE_CONTROL_STRETCH 23 : 23 +#define DE_CONTROL_STRETCH_DISABLE 0 +#define DE_CONTROL_STRETCH_ENABLE 1 +#define DE_CONTROL_HOST 22 : 22 +#define DE_CONTROL_HOST_COLOR 0 +#define DE_CONTROL_HOST_MONO 1 +#define DE_CONTROL_LAST_PIXEL 21 : 21 +#define DE_CONTROL_LAST_PIXEL_OFF 0 +#define DE_CONTROL_LAST_PIXEL_ON 1 +#define DE_CONTROL_COMMAND 20 : 16 +#define DE_CONTROL_COMMAND_BITBLT 0 +#define DE_CONTROL_COMMAND_RECTANGLE_FILL 1 +#define DE_CONTROL_COMMAND_DE_TILE 2 +#define DE_CONTROL_COMMAND_TRAPEZOID_FILL 3 +#define DE_CONTROL_COMMAND_ALPHA_BLEND 4 +#define DE_CONTROL_COMMAND_RLE_STRIP 5 +#define DE_CONTROL_COMMAND_SHORT_STROKE 6 +#define DE_CONTROL_COMMAND_LINE_DRAW 7 +#define DE_CONTROL_COMMAND_HOST_WRITE 8 +#define DE_CONTROL_COMMAND_HOST_READ 9 +#define DE_CONTROL_COMMAND_HOST_WRITE_BOTTOM_UP 10 +#define DE_CONTROL_COMMAND_ROTATE 11 +#define DE_CONTROL_COMMAND_FONT 12 +#define DE_CONTROL_COMMAND_TEXTURE_LOAD 15 +#define DE_CONTROL_ROP_SELECT 15 : 15 +#define DE_CONTROL_ROP_SELECT_ROP3 0 +#define DE_CONTROL_ROP_SELECT_ROP2 1 +#define DE_CONTROL_ROP2_SOURCE 14 : 14 +#define DE_CONTROL_ROP2_SOURCE_BITMAP 0 +#define DE_CONTROL_ROP2_SOURCE_PATTERN 1 +#define DE_CONTROL_MONO_DATA 13 : 12 +#define DE_CONTROL_MONO_DATA_NOT_PACKED 0 +#define DE_CONTROL_MONO_DATA_8_PACKED 1 +#define DE_CONTROL_MONO_DATA_16_PACKED 2 +#define DE_CONTROL_MONO_DATA_32_PACKED 3 +#define DE_CONTROL_REPEAT_ROTATE 11 : 11 +#define DE_CONTROL_REPEAT_ROTATE_DISABLE 0 +#define DE_CONTROL_REPEAT_ROTATE_ENABLE 1 +#define DE_CONTROL_TRANSPARENCY_MATCH 10 : 10 +#define DE_CONTROL_TRANSPARENCY_MATCH_OPAQUE 0 +#define DE_CONTROL_TRANSPARENCY_MATCH_TRANSPARENT 1 +#define DE_CONTROL_TRANSPARENCY_SELECT 9 : 9 +#define DE_CONTROL_TRANSPARENCY_SELECT_SOURCE 0 +#define DE_CONTROL_TRANSPARENCY_SELECT_DESTINATION 1 +#define DE_CONTROL_TRANSPARENCY 8 : 8 +#define DE_CONTROL_TRANSPARENCY_DISABLE 0 +#define DE_CONTROL_TRANSPARENCY_ENABLE 1 +#define DE_CONTROL_ROP 7 : 0 + +/* Pseudo fields. */ + +#define DE_CONTROL_SHORT_STROKE_DIR 27 : 24 +#define DE_CONTROL_SHORT_STROKE_DIR_225 0 +#define DE_CONTROL_SHORT_STROKE_DIR_135 1 +#define DE_CONTROL_SHORT_STROKE_DIR_315 2 +#define DE_CONTROL_SHORT_STROKE_DIR_45 3 +#define DE_CONTROL_SHORT_STROKE_DIR_270 4 +#define DE_CONTROL_SHORT_STROKE_DIR_90 5 +#define DE_CONTROL_SHORT_STROKE_DIR_180 8 +#define DE_CONTROL_SHORT_STROKE_DIR_0 10 +#define DE_CONTROL_ROTATION 25 : 24 +#define DE_CONTROL_ROTATION_0 0 +#define DE_CONTROL_ROTATION_270 1 +#define DE_CONTROL_ROTATION_90 2 +#define DE_CONTROL_ROTATION_180 3 + +#define DE_PITCH 0x000010 +#define DE_PITCH_DESTINATION 28 : 16 +#define DE_PITCH_SOURCE 12 : 0 + +#define DE_FOREGROUND 0x000014 +#define DE_FOREGROUND_COLOR 31 : 0 + +#define DE_BACKGROUND 0x000018 +#define DE_BACKGROUND_COLOR 31 : 0 + +#define DE_STRETCH_FORMAT 0x00001C +#define DE_STRETCH_FORMAT_PATTERN_XY 30 : 30 +#define DE_STRETCH_FORMAT_PATTERN_XY_NORMAL 0 +#define DE_STRETCH_FORMAT_PATTERN_XY_OVERWRITE 1 +#define DE_STRETCH_FORMAT_PATTERN_Y 29 : 27 +#define DE_STRETCH_FORMAT_PATTERN_X 25 : 23 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT 21 : 20 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT_8 0 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT_16 1 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT_24 3 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT_32 2 +#define DE_STRETCH_FORMAT_ADDRESSING 19 : 16 +#define DE_STRETCH_FORMAT_ADDRESSING_XY 0 +#define DE_STRETCH_FORMAT_ADDRESSING_LINEAR 15 +#define DE_STRETCH_FORMAT_SOURCE_HEIGHT 11 : 0 + +#define DE_COLOR_COMPARE 0x000020 +#define DE_COLOR_COMPARE_COLOR 23 : 0 + +#define DE_COLOR_COMPARE_MASK 0x000024 +#define DE_COLOR_COMPARE_MASK_MASKS 23 : 0 + +#define DE_MASKS 0x000028 +#define DE_MASKS_BYTE_MASK 31 : 16 +#define DE_MASKS_BIT_MASK 15 : 0 + +#define DE_CLIP_TL 0x00002C +#define DE_CLIP_TL_TOP 31 : 16 +#define DE_CLIP_TL_STATUS 13 : 13 +#define DE_CLIP_TL_STATUS_DISABLE 0 +#define DE_CLIP_TL_STATUS_ENABLE 1 +#define DE_CLIP_TL_INHIBIT 12 : 12 +#define DE_CLIP_TL_INHIBIT_OUTSIDE 0 +#define DE_CLIP_TL_INHIBIT_INSIDE 1 +#define DE_CLIP_TL_LEFT 11 : 0 + +#define DE_CLIP_BR 0x000030 +#define DE_CLIP_BR_BOTTOM 31 : 16 +#define DE_CLIP_BR_RIGHT 12 : 0 + +#define DE_MONO_PATTERN_LOW 0x000034 +#define DE_MONO_PATTERN_LOW_PATTERN 31 : 0 + +#define DE_MONO_PATTERN_HIGH 0x000038 +#define DE_MONO_PATTERN_HIGH_PATTERN 31 : 0 + +#define DE_WINDOW_WIDTH 0x00003C +#define DE_WINDOW_WIDTH_DESTINATION 28 : 16 +#define DE_WINDOW_WIDTH_SOURCE 12 : 0 + +#define DE_WINDOW_SOURCE_BASE 0x000040 +#define DE_WINDOW_SOURCE_BASE_EXT 27 : 27 +#define DE_WINDOW_SOURCE_BASE_EXT_LOCAL 0 +#define DE_WINDOW_SOURCE_BASE_EXT_EXTERNAL 1 +#define DE_WINDOW_SOURCE_BASE_CS 26 : 26 +#define DE_WINDOW_SOURCE_BASE_CS_0 0 +#define DE_WINDOW_SOURCE_BASE_CS_1 1 +#define DE_WINDOW_SOURCE_BASE_ADDRESS 25 : 0 + +#define DE_WINDOW_DESTINATION_BASE 0x000044 +#define DE_WINDOW_DESTINATION_BASE_EXT 27 : 27 +#define DE_WINDOW_DESTINATION_BASE_EXT_LOCAL 0 +#define DE_WINDOW_DESTINATION_BASE_EXT_EXTERNAL 1 +#define DE_WINDOW_DESTINATION_BASE_CS 26 : 26 +#define DE_WINDOW_DESTINATION_BASE_CS_0 0 +#define DE_WINDOW_DESTINATION_BASE_CS_1 1 +#define DE_WINDOW_DESTINATION_BASE_ADDRESS 25 : 0 + +#define DE_ALPHA 0x000048 +#define DE_ALPHA_VALUE 7 : 0 + +#define DE_WRAP 0x00004C +#define DE_WRAP_X 31 : 16 +#define DE_WRAP_Y 15 : 0 + +#define DE_STATUS 0x000050 +#define DE_STATUS_CSC 1 : 1 +#define DE_STATUS_CSC_CLEAR 0 +#define DE_STATUS_CSC_NOT_ACTIVE 0 +#define DE_STATUS_CSC_ACTIVE 1 +#define DE_STATUS_2D 0 : 0 +#define DE_STATUS_2D_CLEAR 0 +#define DE_STATUS_2D_NOT_ACTIVE 0 +#define DE_STATUS_2D_ACTIVE 1 + +/* Color Space Conversion registers. */ + +#define CSC_Y_SOURCE_BASE 0x0000C8 +#define CSC_Y_SOURCE_BASE_EXT 27 : 27 +#define CSC_Y_SOURCE_BASE_EXT_LOCAL 0 +#define CSC_Y_SOURCE_BASE_EXT_EXTERNAL 1 +#define CSC_Y_SOURCE_BASE_CS 26 : 26 +#define CSC_Y_SOURCE_BASE_CS_0 0 +#define CSC_Y_SOURCE_BASE_CS_1 1 +#define CSC_Y_SOURCE_BASE_ADDRESS 25 : 0 + +#define CSC_CONSTANTS 0x0000CC +#define CSC_CONSTANTS_Y 31 : 24 +#define CSC_CONSTANTS_R 23 : 16 +#define CSC_CONSTANTS_G 15 : 8 +#define CSC_CONSTANTS_B 7 : 0 + +#define CSC_Y_SOURCE_X 0x0000D0 +#define CSC_Y_SOURCE_X_INTEGER 26 : 16 +#define CSC_Y_SOURCE_X_FRACTION 15 : 3 + +#define CSC_Y_SOURCE_Y 0x0000D4 +#define CSC_Y_SOURCE_Y_INTEGER 27 : 16 +#define CSC_Y_SOURCE_Y_FRACTION 15 : 3 + +#define CSC_U_SOURCE_BASE 0x0000D8 +#define CSC_U_SOURCE_BASE_EXT 27 : 27 +#define CSC_U_SOURCE_BASE_EXT_LOCAL 0 +#define CSC_U_SOURCE_BASE_EXT_EXTERNAL 1 +#define CSC_U_SOURCE_BASE_CS 26 : 26 +#define CSC_U_SOURCE_BASE_CS_0 0 +#define CSC_U_SOURCE_BASE_CS_1 1 +#define CSC_U_SOURCE_BASE_ADDRESS 25 : 0 + +#define CSC_V_SOURCE_BASE 0x0000DC +#define CSC_V_SOURCE_BASE_EXT 27 : 27 +#define CSC_V_SOURCE_BASE_EXT_LOCAL 0 +#define CSC_V_SOURCE_BASE_EXT_EXTERNAL 1 +#define CSC_V_SOURCE_BASE_CS 26 : 26 +#define CSC_V_SOURCE_BASE_CS_0 0 +#define CSC_V_SOURCE_BASE_CS_1 1 +#define CSC_V_SOURCE_BASE_ADDRESS 25 : 0 + +#define CSC_SOURCE_DIMENSION 0x0000E0 +#define CSC_SOURCE_DIMENSION_X 31 : 16 +#define CSC_SOURCE_DIMENSION_Y 15 : 0 + +#define CSC_SOURCE_PITCH 0x0000E4 +#define CSC_SOURCE_PITCH_Y 31 : 16 +#define CSC_SOURCE_PITCH_UV 15 : 0 + +#define CSC_DESTINATION 0x0000E8 +#define CSC_DESTINATION_WRAP 31 : 31 +#define CSC_DESTINATION_WRAP_DISABLE 0 +#define CSC_DESTINATION_WRAP_ENABLE 1 +#define CSC_DESTINATION_X 27 : 16 +#define CSC_DESTINATION_Y 11 : 0 + +#define CSC_DESTINATION_DIMENSION 0x0000EC +#define CSC_DESTINATION_DIMENSION_X 31 : 16 +#define CSC_DESTINATION_DIMENSION_Y 15 : 0 + +#define CSC_DESTINATION_PITCH 0x0000F0 +#define CSC_DESTINATION_PITCH_X 31 : 16 +#define CSC_DESTINATION_PITCH_Y 15 : 0 + +#define CSC_SCALE_FACTOR 0x0000F4 +#define CSC_SCALE_FACTOR_HORIZONTAL 31 : 16 +#define CSC_SCALE_FACTOR_VERTICAL 15 : 0 + +#define CSC_DESTINATION_BASE 0x0000F8 +#define CSC_DESTINATION_BASE_EXT 27 : 27 +#define CSC_DESTINATION_BASE_EXT_LOCAL 0 +#define CSC_DESTINATION_BASE_EXT_EXTERNAL 1 +#define CSC_DESTINATION_BASE_CS 26 : 26 +#define CSC_DESTINATION_BASE_CS_0 0 +#define CSC_DESTINATION_BASE_CS_1 1 +#define CSC_DESTINATION_BASE_ADDRESS 25 : 0 + +#define CSC_CONTROL 0x0000FC +#define CSC_CONTROL_STATUS 31 : 31 +#define CSC_CONTROL_STATUS_STOP 0 +#define CSC_CONTROL_STATUS_START 1 +#define CSC_CONTROL_SOURCE_FORMAT 30 : 28 +#define CSC_CONTROL_SOURCE_FORMAT_YUV422 0 +#define CSC_CONTROL_SOURCE_FORMAT_YUV420I 1 +#define CSC_CONTROL_SOURCE_FORMAT_YUV420 2 +#define CSC_CONTROL_SOURCE_FORMAT_YVU9 3 +#define CSC_CONTROL_SOURCE_FORMAT_IYU1 4 +#define CSC_CONTROL_SOURCE_FORMAT_IYU2 5 +#define CSC_CONTROL_SOURCE_FORMAT_RGB565 6 +#define CSC_CONTROL_SOURCE_FORMAT_RGB8888 7 +#define CSC_CONTROL_DESTINATION_FORMAT 27 : 26 +#define CSC_CONTROL_DESTINATION_FORMAT_RGB565 0 +#define CSC_CONTROL_DESTINATION_FORMAT_RGB8888 1 +#define CSC_CONTROL_HORIZONTAL_FILTER 25 : 25 +#define CSC_CONTROL_HORIZONTAL_FILTER_DISABLE 0 +#define CSC_CONTROL_HORIZONTAL_FILTER_ENABLE 1 +#define CSC_CONTROL_VERTICAL_FILTER 24 : 24 +#define CSC_CONTROL_VERTICAL_FILTER_DISABLE 0 +#define CSC_CONTROL_VERTICAL_FILTER_ENABLE 1 +#define CSC_CONTROL_BYTE_ORDER 23 : 23 +#define CSC_CONTROL_BYTE_ORDER_YUYV 0 +#define CSC_CONTROL_BYTE_ORDER_UYVY 1 + +#define DE_DATA_PORT_501 0x110000 +#define DE_DATA_PORT_712 0x400000 +#define DE_DATA_PORT_722 0x6000 + +/* point to virtual Memory Map IO starting address */ +extern char *smtc_RegBaseAddress; +/* point to virtual video memory starting address */ +extern char *smtc_VRAMBaseAddress; +extern unsigned char smtc_de_busy; + +extern unsigned long memRead32(unsigned long nOffset); +extern void memWrite32(unsigned long nOffset, unsigned long nData); +extern unsigned long SMTC_read2Dreg(unsigned long nOffset); + +/* 2D functions */ +extern void deInit(unsigned int nModeWidth, unsigned int nModeHeight, + unsigned int bpp); + +extern void deWaitForNotBusy(void); + +extern void deVerticalLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX, + unsigned long nY, + unsigned long dst_height, + unsigned long nColor); + +extern void deHorizontalLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX, + unsigned long nY, + unsigned long dst_width, + unsigned long nColor); + +extern void deLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX1, + unsigned long nY1, + unsigned long nX2, + unsigned long nY2, + unsigned long nColor); + +extern void deFillRect(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long dst_X, + unsigned long dst_Y, + unsigned long dst_width, + unsigned long dst_height, + unsigned long nColor); + +extern void deRotatePattern(unsigned char *pattern_dstaddr, + unsigned long pattern_src_addr, + unsigned long pattern_BPP, + unsigned long pattern_stride, + int patternX, + int patternY); + +extern void deCopy(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long dst_BPP, + unsigned long dst_X, + unsigned long dst_Y, + unsigned long dst_width, + unsigned long dst_height, + unsigned long src_base, + unsigned long src_pitch, + unsigned long src_X, + unsigned long src_Y, + pTransparent pTransp, + unsigned char nROP2); + +/* + * System memory to Video memory monochrome expansion. + * + * Source is monochrome image in system memory. This function expands the + * monochrome data to color image in video memory. + * + * @pSrcbuf: pointer to start of source buffer in system memory + * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top + * down and -ive mean button up + * @startBit: Mono data can start at any bit in a byte, this value should + * be 0 to 7 + * @dBase: Address of destination : offset in frame buffer + * @dPitch: Pitch value of destination surface in BYTE + * @bpp: Color depth of destination surface + * @dx, dy: Starting coordinate of destination surface + * @width, height: width and height of rectange in pixel value + * @fColor,bColor: Foreground, Background color (corresponding to a 1, 0 in + * the monochrome data) + * @rop2: ROP value + */ + +extern long deSystemMem2VideoMemMonoBlt( + const char *pSrcbuf, + long srcDelta, + unsigned long startBit, + unsigned long dBase, + unsigned long dPitch, + unsigned long bpp, + unsigned long dx, unsigned long dy, + unsigned long width, unsigned long height, + unsigned long fColor, + unsigned long bColor, + unsigned long rop2); + +extern unsigned long deGetTransparency(void); +extern void deSetPixelFormat(unsigned long bpp); diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c new file mode 100644 index 00000000000..161dbc9c139 --- /dev/null +++ b/drivers/staging/sm7xx/smtcfb.c @@ -0,0 +1,1253 @@ +/* + * Silicon Motion SM7XX frame buffer device + * + * Copyright (C) 2006 Silicon Motion Technology Corp. + * Authors: Ge Wang, gewang@siliconmotion.com + * Boyod boyod.yang@siliconmotion.com.cn + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Version 0.10.26192.21.01 + * - Add PowerPC/Big endian support + * - Add 2D support for Lynx + * - Verified on2.6.19.2 Boyod.yang <boyod.yang@siliconmotion.com.cn> + * + * Version 0.09.2621.00.01 + * - Only support Linux Kernel's version 2.6.21. + * Boyod.yang <boyod.yang@siliconmotion.com.cn> + * + * Version 0.09 + * - Only support Linux Kernel's version 2.6.12. + * Boyod.yang <boyod.yang@siliconmotion.com.cn> + */ + +#ifndef __KERNEL__ +#define __KERNEL__ +#endif + +#include <linux/io.h> +#include <linux/fb.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/uaccess.h> +#include <linux/console.h> +#include <linux/screen_info.h> + +#ifdef CONFIG_PM +#include <linux/pm.h> +#endif + +struct screen_info smtc_screen_info; + +#include "smtcfb.h" +#include "smtc2d.h" + +#ifdef DEBUG +#define smdbg(format, arg...) printk(KERN_DEBUG format , ## arg) +#else +#define smdbg(format, arg...) +#endif + +/* +* Private structure +*/ +struct smtcfb_info { + /* + * The following is a pointer to be passed into the + * functions below. The modules outside the main + * voyager.c driver have no knowledge as to what + * is within this structure. + */ + struct fb_info fb; + struct display_switch *dispsw; + struct pci_dev *dev; + signed int currcon; + + struct { + u8 red, green, blue; + } palette[NR_RGB]; + + u_int palette_size; +}; + +struct par_info { + /* + * Hardware + */ + u16 chipID; + unsigned char __iomem *m_pMMIO; + char __iomem *m_pLFB; + char *m_pDPR; + char *m_pVPR; + char *m_pCPR; + + u_int width; + u_int height; + u_int hz; + u_long BaseAddressInVRAM; + u8 chipRevID; +}; + +struct vesa_mode_table { + char mode_index[6]; + u16 lfb_width; + u16 lfb_height; + u16 lfb_depth; +}; + +static struct vesa_mode_table vesa_mode[] = { + {"0x301", 640, 480, 8}, + {"0x303", 800, 600, 8}, + {"0x305", 1024, 768, 8}, + {"0x307", 1280, 1024, 8}, + + {"0x311", 640, 480, 16}, + {"0x314", 800, 600, 16}, + {"0x317", 1024, 768, 16}, + {"0x31A", 1280, 1024, 16}, + + {"0x312", 640, 480, 24}, + {"0x315", 800, 600, 24}, + {"0x318", 1024, 768, 24}, + {"0x31B", 1280, 1024, 24}, +}; + +char __iomem *smtc_RegBaseAddress; /* Memory Map IO starting address */ +char __iomem *smtc_VRAMBaseAddress; /* video memory starting address */ + +char *smtc_2DBaseAddress; /* 2D engine starting address */ +char *smtc_2Ddataport; /* 2D data port offset */ +short smtc_2Dacceleration; + +static u32 colreg[17]; +static struct par_info hw; /* hardware information */ + +u16 smtc_ChipIDs[] = { + 0x710, + 0x712, + 0x720 +}; + +#define numSMTCchipIDs (sizeof(smtc_ChipIDs) / sizeof(u16)) + +void deWaitForNotBusy(void) +{ + unsigned long i = 0x1000000; + while (i--) { + if ((smtc_seqr(0x16) & 0x18) == 0x10) + break; + } + smtc_de_busy = 0; +} + +static void sm712_set_timing(struct smtcfb_info *sfb, + struct par_info *ppar_info) +{ + int i = 0, j = 0; + u32 m_nScreenStride; + + smdbg("\nppar_info->width = %d ppar_info->height = %d" + "sfb->fb.var.bits_per_pixel = %d ppar_info->hz = %d\n", + ppar_info->width, ppar_info->height, + sfb->fb.var.bits_per_pixel, ppar_info->hz); + + for (j = 0; j < numVGAModes; j++) { + if (VGAMode[j].mmSizeX == ppar_info->width && + VGAMode[j].mmSizeY == ppar_info->height && + VGAMode[j].bpp == sfb->fb.var.bits_per_pixel && + VGAMode[j].hz == ppar_info->hz) { + + smdbg("\nVGAMode[j].mmSizeX = %d VGAMode[j].mmSizeY =" + "%d VGAMode[j].bpp = %d" + "VGAMode[j].hz=%d\n", + VGAMode[j].mmSizeX, VGAMode[j].mmSizeY, + VGAMode[j].bpp, VGAMode[j].hz); + + smdbg("VGAMode index=%d\n", j); + + smtc_mmiowb(0x0, 0x3c6); + + smtc_seqw(0, 0x1); + + smtc_mmiowb(VGAMode[j].Init_MISC, 0x3c2); + + /* init SEQ register SR00 - SR04 */ + for (i = 0; i < SIZE_SR00_SR04; i++) + smtc_seqw(i, VGAMode[j].Init_SR00_SR04[i]); + + /* init SEQ register SR10 - SR24 */ + for (i = 0; i < SIZE_SR10_SR24; i++) + smtc_seqw(i + 0x10, + VGAMode[j].Init_SR10_SR24[i]); + + /* init SEQ register SR30 - SR75 */ + for (i = 0; i < SIZE_SR30_SR75; i++) + if (((i + 0x30) != 0x62) \ + && ((i + 0x30) != 0x6a) \ + && ((i + 0x30) != 0x6b)) + smtc_seqw(i + 0x30, + VGAMode[j].Init_SR30_SR75[i]); + + /* init SEQ register SR80 - SR93 */ + for (i = 0; i < SIZE_SR80_SR93; i++) + smtc_seqw(i + 0x80, + VGAMode[j].Init_SR80_SR93[i]); + + /* init SEQ register SRA0 - SRAF */ + for (i = 0; i < SIZE_SRA0_SRAF; i++) + smtc_seqw(i + 0xa0, + VGAMode[j].Init_SRA0_SRAF[i]); + + /* init Graphic register GR00 - GR08 */ + for (i = 0; i < SIZE_GR00_GR08; i++) + smtc_grphw(i, VGAMode[j].Init_GR00_GR08[i]); + + /* init Attribute register AR00 - AR14 */ + for (i = 0; i < SIZE_AR00_AR14; i++) + smtc_attrw(i, VGAMode[j].Init_AR00_AR14[i]); + + /* init CRTC register CR00 - CR18 */ + for (i = 0; i < SIZE_CR00_CR18; i++) + smtc_crtcw(i, VGAMode[j].Init_CR00_CR18[i]); + + /* init CRTC register CR30 - CR4D */ + for (i = 0; i < SIZE_CR30_CR4D; i++) + smtc_crtcw(i + 0x30, + VGAMode[j].Init_CR30_CR4D[i]); + + /* init CRTC register CR90 - CRA7 */ + for (i = 0; i < SIZE_CR90_CRA7; i++) + smtc_crtcw(i + 0x90, + VGAMode[j].Init_CR90_CRA7[i]); + } + } + smtc_mmiowb(0x67, 0x3c2); + + /* set VPR registers */ + writel(0x0, ppar_info->m_pVPR + 0x0C); + writel(0x0, ppar_info->m_pVPR + 0x40); + + /* set data width */ + m_nScreenStride = + (ppar_info->width * sfb->fb.var.bits_per_pixel) / 64; + switch (sfb->fb.var.bits_per_pixel) { + case 8: + writel(0x0, ppar_info->m_pVPR + 0x0); + break; + case 16: + writel(0x00020000, ppar_info->m_pVPR + 0x0); + break; + case 24: + writel(0x00040000, ppar_info->m_pVPR + 0x0); + break; + case 32: + writel(0x00030000, ppar_info->m_pVPR + 0x0); + break; + } + writel((u32) (((m_nScreenStride + 2) << 16) | m_nScreenStride), + ppar_info->m_pVPR + 0x10); + +} + +static void sm712_setpalette(int regno, unsigned red, unsigned green, + unsigned blue, struct fb_info *info) +{ + struct par_info *cur_par = (struct par_info *)info->par; + + if (cur_par->BaseAddressInVRAM) + /* + * second display palette for dual head. Enable CRT RAM, 6-bit + * RAM + */ + smtc_seqw(0x66, (smtc_seqr(0x66) & 0xC3) | 0x20); + else + /* primary display palette. Enable LCD RAM only, 6-bit RAM */ + smtc_seqw(0x66, (smtc_seqr(0x66) & 0xC3) | 0x10); + smtc_mmiowb(regno, dac_reg); + smtc_mmiowb(red >> 10, dac_val); + smtc_mmiowb(green >> 10, dac_val); + smtc_mmiowb(blue >> 10, dac_val); +} + +static void smtc_set_timing(struct smtcfb_info *sfb, struct par_info + *ppar_info) +{ + switch (ppar_info->chipID) { + case 0x710: + case 0x712: + case 0x720: + sm712_set_timing(sfb, ppar_info); + break; + } +} + +static struct fb_var_screeninfo smtcfb_var = { + .xres = 1024, + .yres = 600, + .xres_virtual = 1024, + .yres_virtual = 600, + .bits_per_pixel = 16, + .red = {16, 8, 0}, + .green = {8, 8, 0}, + .blue = {0, 8, 0}, + .activate = FB_ACTIVATE_NOW, + .height = -1, + .width = -1, + .vmode = FB_VMODE_NONINTERLACED, +}; + +static struct fb_fix_screeninfo smtcfb_fix = { + .id = "sm712fb", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_TRUECOLOR, + .line_length = 800 * 3, + .accel = FB_ACCEL_SMI_LYNX, +}; + +/* chan_to_field + * + * convert a colour value into a field position + * + * from pxafb.c + */ + +static inline unsigned int chan_to_field(unsigned int chan, + struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int smtcfb_blank(int blank_mode, struct fb_info *info) +{ + /* clear DPMS setting */ + switch (blank_mode) { + case FB_BLANK_UNBLANK: + /* Screen On: HSync: On, VSync : On */ + smtc_seqw(0x01, (smtc_seqr(0x01) & (~0x20))); + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x21, (smtc_seqr(0x21) & 0x77)); + smtc_seqw(0x22, (smtc_seqr(0x22) & (~0x30))); + smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0))); + smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01)); + smtc_seqw(0x31, (smtc_seqr(0x31) | 0x03)); + break; + case FB_BLANK_NORMAL: + /* Screen Off: HSync: On, VSync : On Soft blank */ + smtc_seqw(0x01, (smtc_seqr(0x01) & (~0x20))); + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x22, (smtc_seqr(0x22) & (~0x30))); + smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0))); + smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01)); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + break; + case FB_BLANK_VSYNC_SUSPEND: + /* Screen On: HSync: On, VSync : Off */ + smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20)); + smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); + smtc_seqw(0x6a, 0x0c); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88)); + smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x20)); + smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0x20)); + smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80)); + break; + case FB_BLANK_HSYNC_SUSPEND: + /* Screen On: HSync: Off, VSync : On */ + smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20)); + smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); + smtc_seqw(0x6a, 0x0c); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88)); + smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x10)); + smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8)); + smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80)); + break; + case FB_BLANK_POWERDOWN: + /* Screen On: HSync: Off, VSync : Off */ + smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20)); + smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); + smtc_seqw(0x6a, 0x0c); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88)); + smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x30)); + smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8)); + smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80)); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int smtc_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned trans, struct fb_info *info) +{ + struct smtcfb_info *sfb = (struct smtcfb_info *)info; + u32 val; + + if (regno > 255) + return 1; + + switch (sfb->fb.fix.visual) { + case FB_VISUAL_DIRECTCOLOR: + case FB_VISUAL_TRUECOLOR: + /* + * 16/32 bit true-colour, use pseuo-palette for 16 base color + */ + if (regno < 16) { + if (sfb->fb.var.bits_per_pixel == 16) { + u32 *pal = sfb->fb.pseudo_palette; + val = chan_to_field(red, &sfb->fb.var.red); + val |= chan_to_field(green, \ + &sfb->fb.var.green); + val |= chan_to_field(blue, &sfb->fb.var.blue); +#ifdef __BIG_ENDIAN + pal[regno] = + ((red & 0xf800) >> 8) | + ((green & 0xe000) >> 13) | + ((green & 0x1c00) << 3) | + ((blue & 0xf800) >> 3); +#else + pal[regno] = val; +#endif + } else { + u32 *pal = sfb->fb.pseudo_palette; + val = chan_to_field(red, &sfb->fb.var.red); + val |= chan_to_field(green, \ + &sfb->fb.var.green); + val |= chan_to_field(blue, &sfb->fb.var.blue); +#ifdef __BIG_ENDIAN + val = + (val & 0xff00ff00 >> 8) | + (val & 0x00ff00ff << 8); +#endif + pal[regno] = val; + } + } + break; + + case FB_VISUAL_PSEUDOCOLOR: + /* color depth 8 bit */ + sm712_setpalette(regno, red, green, blue, info); + break; + + default: + return 1; /* unknown type */ + } + + return 0; + +} + +#ifdef __BIG_ENDIAN +static ssize_t smtcfb_read(struct fb_info *info, char __user * buf, size_t + count, loff_t *ppos) +{ + unsigned long p = *ppos; + + u32 *buffer, *dst; + u32 __iomem *src; + int c, i, cnt = 0, err = 0; + unsigned long total_size; + + if (!info || !info->screen_base) + return -ENODEV; + + if (info->state != FBINFO_STATE_RUNNING) + return -EPERM; + + total_size = info->screen_size; + + if (total_size == 0) + total_size = info->fix.smem_len; + + if (p >= total_size) + return 0; + + if (count >= total_size) + count = total_size; + + if (count + p > total_size) + count = total_size - p; + + buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + src = (u32 __iomem *) (info->screen_base + p); + + if (info->fbops->fb_sync) + info->fbops->fb_sync(info); + + while (count) { + c = (count > PAGE_SIZE) ? PAGE_SIZE : count; + dst = buffer; + for (i = c >> 2; i--;) { + *dst = fb_readl(src++); + *dst = + (*dst & 0xff00ff00 >> 8) | + (*dst & 0x00ff00ff << 8); + dst++; + } + if (c & 3) { + u8 *dst8 = (u8 *) dst; + u8 __iomem *src8 = (u8 __iomem *) src; + + for (i = c & 3; i--;) { + if (i & 1) { + *dst8++ = fb_readb(++src8); + } else { + *dst8++ = fb_readb(--src8); + src8 += 2; + } + } + src = (u32 __iomem *) src8; + } + + if (copy_to_user(buf, buffer, c)) { + err = -EFAULT; + break; + } + *ppos += c; + buf += c; + cnt += c; + count -= c; + } + + kfree(buffer); + + return (err) ? err : cnt; +} + +static ssize_t +smtcfb_write(struct fb_info *info, const char __user *buf, size_t count, + loff_t *ppos) +{ + unsigned long p = *ppos; + + u32 *buffer, *src; + u32 __iomem *dst; + int c, i, cnt = 0, err = 0; + unsigned long total_size; + + if (!info || !info->screen_base) + return -ENODEV; + + if (info->state != FBINFO_STATE_RUNNING) + return -EPERM; + + total_size = info->screen_size; + + if (total_size == 0) + total_size = info->fix.smem_len; + + if (p > total_size) + return -EFBIG; + + if (count > total_size) { + err = -EFBIG; + count = total_size; + } + + if (count + p > total_size) { + if (!err) + err = -ENOSPC; + + count = total_size - p; + } + + buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + dst = (u32 __iomem *) (info->screen_base + p); + + if (info->fbops->fb_sync) + info->fbops->fb_sync(info); + + while (count) { + c = (count > PAGE_SIZE) ? PAGE_SIZE : count; + src = buffer; + + if (copy_from_user(src, buf, c)) { + err = -EFAULT; + break; + } + + for (i = c >> 2; i--;) { + fb_writel((*src & 0xff00ff00 >> 8) | + (*src & 0x00ff00ff << 8), dst++); + src++; + } + if (c & 3) { + u8 *src8 = (u8 *) src; + u8 __iomem *dst8 = (u8 __iomem *) dst; + + for (i = c & 3; i--;) { + if (i & 1) { + fb_writeb(*src8++, ++dst8); + } else { + fb_writeb(*src8++, --dst8); + dst8 += 2; + } + } + dst = (u32 __iomem *) dst8; + } + + *ppos += c; + buf += c; + cnt += c; + count -= c; + } + + kfree(buffer); + + return (cnt) ? cnt : err; +} +#endif /* ! __BIG_ENDIAN */ + +#include "smtc2d.c" + +void smtcfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) +{ + struct par_info *p = (struct par_info *)info->par; + + if (smtc_2Dacceleration) { + if (!area->width || !area->height) + return; + + deCopy(p->BaseAddressInVRAM, 0, info->var.bits_per_pixel, + area->dx, area->dy, area->width, area->height, + p->BaseAddressInVRAM, 0, area->sx, area->sy, 0, 0xC); + + } else + cfb_copyarea(info, area); +} + +void smtcfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) +{ + struct par_info *p = (struct par_info *)info->par; + + if (smtc_2Dacceleration) { + if (!rect->width || !rect->height) + return; + if (info->var.bits_per_pixel >= 24) + deFillRect(p->BaseAddressInVRAM, 0, rect->dx * 3, + rect->dy * 3, rect->width * 3, rect->height, + rect->color); + else + deFillRect(p->BaseAddressInVRAM, 0, rect->dx, rect->dy, + rect->width, rect->height, rect->color); + } else + cfb_fillrect(info, rect); +} + +void smtcfb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + struct par_info *p = (struct par_info *)info->par; + u32 bg_col = 0, fg_col = 0; + + if ((smtc_2Dacceleration) && (image->depth == 1)) { + if (smtc_de_busy) + deWaitForNotBusy(); + + switch (info->var.bits_per_pixel) { + case 8: + bg_col = image->bg_color; + fg_col = image->fg_color; + break; + case 16: + bg_col = + ((u32 *) (info->pseudo_palette))[image->bg_color]; + fg_col = + ((u32 *) (info->pseudo_palette))[image->fg_color]; + break; + case 32: + bg_col = + ((u32 *) (info->pseudo_palette))[image->bg_color]; + fg_col = + ((u32 *) (info->pseudo_palette))[image->fg_color]; + break; + } + + deSystemMem2VideoMemMonoBlt( + image->data, + image->width / 8, + 0, + p->BaseAddressInVRAM, + 0, + 0, + image->dx, image->dy, + image->width, image->height, + fg_col, bg_col, + 0x0C); + + } else + cfb_imageblit(info, image); +} + +static struct fb_ops smtcfb_ops = { + .owner = THIS_MODULE, + .fb_setcolreg = smtc_setcolreg, + .fb_blank = smtcfb_blank, + .fb_fillrect = smtcfb_fillrect, + .fb_imageblit = smtcfb_imageblit, + .fb_copyarea = smtcfb_copyarea, +#ifdef __BIG_ENDIAN + .fb_read = smtcfb_read, + .fb_write = smtcfb_write, +#endif + +}; + +void smtcfb_setmode(struct smtcfb_info *sfb) +{ + switch (sfb->fb.var.bits_per_pixel) { + case 32: + sfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; + sfb->fb.fix.line_length = sfb->fb.var.xres * 4; + sfb->fb.var.red.length = 8; + sfb->fb.var.green.length = 8; + sfb->fb.var.blue.length = 8; + sfb->fb.var.red.offset = 16; + sfb->fb.var.green.offset = 8; + sfb->fb.var.blue.offset = 0; + + break; + case 8: + sfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; + sfb->fb.fix.line_length = sfb->fb.var.xres; + sfb->fb.var.red.offset = 5; + sfb->fb.var.red.length = 3; + sfb->fb.var.green.offset = 2; + sfb->fb.var.green.length = 3; + sfb->fb.var.blue.offset = 0; + sfb->fb.var.blue.length = 2; + break; + case 24: + sfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; + sfb->fb.fix.line_length = sfb->fb.var.xres * 3; + sfb->fb.var.red.length = 8; + sfb->fb.var.green.length = 8; + sfb->fb.var.blue.length = 8; + + sfb->fb.var.red.offset = 16; + sfb->fb.var.green.offset = 8; + sfb->fb.var.blue.offset = 0; + + break; + case 16: + default: + sfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; + sfb->fb.fix.line_length = sfb->fb.var.xres * 2; + + sfb->fb.var.red.length = 5; + sfb->fb.var.green.length = 6; + sfb->fb.var.blue.length = 5; + + sfb->fb.var.red.offset = 11; + sfb->fb.var.green.offset = 5; + sfb->fb.var.blue.offset = 0; + + break; + } + + hw.width = sfb->fb.var.xres; + hw.height = sfb->fb.var.yres; + hw.hz = 60; + smtc_set_timing(sfb, &hw); + if (smtc_2Dacceleration) { + printk("2D acceleration enabled!\n"); + /* Init smtc drawing engine */ + deInit(sfb->fb.var.xres, sfb->fb.var.yres, + sfb->fb.var.bits_per_pixel); + } +} + +/* + * Alloc struct smtcfb_info and assign the default value + */ +static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *dev, + char *name) +{ + struct smtcfb_info *sfb; + + sfb = kmalloc(sizeof(struct smtcfb_info), GFP_KERNEL); + + if (!sfb) + return NULL; + + memset(sfb, 0, sizeof(struct smtcfb_info)); + + sfb->currcon = -1; + sfb->dev = dev; + + /*** Init sfb->fb with default value ***/ + sfb->fb.flags = FBINFO_FLAG_DEFAULT; + sfb->fb.fbops = &smtcfb_ops; + sfb->fb.var = smtcfb_var; + sfb->fb.fix = smtcfb_fix; + + strcpy(sfb->fb.fix.id, name); + + sfb->fb.fix.type = FB_TYPE_PACKED_PIXELS; + sfb->fb.fix.type_aux = 0; + sfb->fb.fix.xpanstep = 0; + sfb->fb.fix.ypanstep = 0; + sfb->fb.fix.ywrapstep = 0; + sfb->fb.fix.accel = FB_ACCEL_SMI_LYNX; + + sfb->fb.var.nonstd = 0; + sfb->fb.var.activate = FB_ACTIVATE_NOW; + sfb->fb.var.height = -1; + sfb->fb.var.width = -1; + /* text mode acceleration */ + sfb->fb.var.accel_flags = FB_ACCELF_TEXT; + sfb->fb.var.vmode = FB_VMODE_NONINTERLACED; + sfb->fb.par = &hw; + sfb->fb.pseudo_palette = colreg; + + return sfb; +} + +/* + * Unmap in the memory mapped IO registers + */ + +static void smtc_unmap_mmio(struct smtcfb_info *sfb) +{ + if (sfb && smtc_RegBaseAddress) + smtc_RegBaseAddress = NULL; +} + +/* + * Map in the screen memory + */ + +static int smtc_map_smem(struct smtcfb_info *sfb, + struct pci_dev *dev, u_long smem_len) +{ + if (sfb->fb.var.bits_per_pixel == 32) { +#ifdef __BIG_ENDIAN + sfb->fb.fix.smem_start = pci_resource_start(dev, 0) + + 0x800000; +#else + sfb->fb.fix.smem_start = pci_resource_start(dev, 0); +#endif + } else { + sfb->fb.fix.smem_start = pci_resource_start(dev, 0); + } + + sfb->fb.fix.smem_len = smem_len; + + sfb->fb.screen_base = smtc_VRAMBaseAddress; + + if (!sfb->fb.screen_base) { + printk(KERN_INFO "%s: unable to map screen memory\n", + sfb->fb.fix.id); + return -ENOMEM; + } + + return 0; +} + +/* + * Unmap in the screen memory + * + */ +static void smtc_unmap_smem(struct smtcfb_info *sfb) +{ + if (sfb && sfb->fb.screen_base) { + iounmap(sfb->fb.screen_base); + sfb->fb.screen_base = NULL; + } +} + +/* + * We need to wake up the LynxEM+, and make sure its in linear memory mode. + */ +static inline void sm7xx_init_hw(void) +{ + outb_p(0x18, 0x3c4); + outb_p(0x11, 0x3c5); +} + +static void smtc_free_fb_info(struct smtcfb_info *sfb) +{ + if (sfb) { + fb_alloc_cmap(&sfb->fb.cmap, 0, 0); + kfree(sfb); + } +} + +/* + * sm712vga_setup - process command line options, get vga parameter + * @options: string of options + * Returns zero. + * + */ +static int __init __maybe_unused sm712vga_setup(char *options) +{ + int index; + + if (!options || !*options) { + smdbg("\n No vga parameter\n"); + return -EINVAL; + } + + smtc_screen_info.lfb_width = 0; + smtc_screen_info.lfb_height = 0; + smtc_screen_info.lfb_depth = 0; + + smdbg("\nsm712vga_setup = %s\n", options); + + for (index = 0; + index < (sizeof(vesa_mode) / sizeof(struct vesa_mode_table)); + index++) { + if (strstr(options, vesa_mode[index].mode_index)) { + smtc_screen_info.lfb_width = vesa_mode[index].lfb_width; + smtc_screen_info.lfb_height = + vesa_mode[index].lfb_height; + smtc_screen_info.lfb_depth = vesa_mode[index].lfb_depth; + return 0; + } + } + + return -1; +} +__setup("vga=", sm712vga_setup); + +/* Jason (08/13/2009) + * Original init function changed to probe method to be used by pci_drv + * process used to detect chips replaced with kernel process in pci_drv + */ +static int __init smtcfb_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct smtcfb_info *sfb; + u_long smem_size = 0x00800000; /* default 8MB */ + char name[16]; + int err; + unsigned long pFramebufferPhysical; + + printk(KERN_INFO + "Silicon Motion display driver " SMTC_LINUX_FB_VERSION "\n"); + + err = pci_enable_device(pdev); /* enable SMTC chip */ + + if (err) + return err; + err = -ENOMEM; + + hw.chipID = ent->device; + sprintf(name, "sm%Xfb", hw.chipID); + + sfb = smtc_alloc_fb_info(pdev, name); + + if (!sfb) + goto failed; + /* Jason (08/13/2009) + * Store fb_info to be further used when suspending and resuming + */ + pci_set_drvdata(pdev, sfb); + + sm7xx_init_hw(); + + /*get mode parameter from smtc_screen_info */ + if (smtc_screen_info.lfb_width != 0) { + sfb->fb.var.xres = smtc_screen_info.lfb_width; + sfb->fb.var.yres = smtc_screen_info.lfb_height; + sfb->fb.var.bits_per_pixel = smtc_screen_info.lfb_depth; + } else { + /* default resolution 1024x600 16bit mode */ + sfb->fb.var.xres = SCREEN_X_RES; + sfb->fb.var.yres = SCREEN_Y_RES; + sfb->fb.var.bits_per_pixel = SCREEN_BPP; + } + +#ifdef __BIG_ENDIAN + if (sfb->fb.var.bits_per_pixel == 24) + sfb->fb.var.bits_per_pixel = (smtc_screen_info.lfb_depth = 32); +#endif + /* Map address and memory detection */ + pFramebufferPhysical = pci_resource_start(pdev, 0); + pci_read_config_byte(pdev, PCI_REVISION_ID, &hw.chipRevID); + + switch (hw.chipID) { + case 0x710: + case 0x712: + sfb->fb.fix.mmio_start = pFramebufferPhysical + 0x00400000; + sfb->fb.fix.mmio_len = 0x00400000; + smem_size = SM712_VIDEOMEMORYSIZE; +#ifdef __BIG_ENDIAN + hw.m_pLFB = (smtc_VRAMBaseAddress = + ioremap(pFramebufferPhysical, 0x00c00000)); +#else + hw.m_pLFB = (smtc_VRAMBaseAddress = + ioremap(pFramebufferPhysical, 0x00800000)); +#endif + hw.m_pMMIO = (smtc_RegBaseAddress = + smtc_VRAMBaseAddress + 0x00700000); + smtc_2DBaseAddress = (hw.m_pDPR = + smtc_VRAMBaseAddress + 0x00408000); + smtc_2Ddataport = smtc_VRAMBaseAddress + DE_DATA_PORT_712; + hw.m_pVPR = hw.m_pLFB + 0x0040c000; +#ifdef __BIG_ENDIAN + if (sfb->fb.var.bits_per_pixel == 32) { + smtc_VRAMBaseAddress += 0x800000; + hw.m_pLFB += 0x800000; + printk(KERN_INFO + "\nsmtc_VRAMBaseAddress=%p hw.m_pLFB=%p\n", + smtc_VRAMBaseAddress, hw.m_pLFB); + } +#endif + if (!smtc_RegBaseAddress) { + printk(KERN_INFO + "%s: unable to map memory mapped IO\n", + sfb->fb.fix.id); + return -ENOMEM; + } + + /* set MCLK = 14.31818 * (0x16 / 0x2) */ + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x62, 0x3e); + /* enable PCI burst */ + smtc_seqw(0x17, 0x20); + /* enable word swap */ +#ifdef __BIG_ENDIAN + if (sfb->fb.var.bits_per_pixel == 32) + smtc_seqw(0x17, 0x30); +#endif +#ifdef CONFIG_FB_SM7XX_ACCEL + smtc_2Dacceleration = 1; +#endif + break; + case 0x720: + sfb->fb.fix.mmio_start = pFramebufferPhysical; + sfb->fb.fix.mmio_len = 0x00200000; + smem_size = SM722_VIDEOMEMORYSIZE; + smtc_2DBaseAddress = (hw.m_pDPR = + ioremap(pFramebufferPhysical, 0x00a00000)); + hw.m_pLFB = (smtc_VRAMBaseAddress = + smtc_2DBaseAddress + 0x00200000); + hw.m_pMMIO = (smtc_RegBaseAddress = + smtc_2DBaseAddress + 0x000c0000); + smtc_2Ddataport = smtc_2DBaseAddress + DE_DATA_PORT_722; + hw.m_pVPR = smtc_2DBaseAddress + 0x800; + + smtc_seqw(0x62, 0xff); + smtc_seqw(0x6a, 0x0d); + smtc_seqw(0x6b, 0x02); + smtc_2Dacceleration = 0; + break; + default: + printk(KERN_INFO + "No valid Silicon Motion display chip was detected!\n"); + + smtc_free_fb_info(sfb); + return err; + } + + /* can support 32 bpp */ + if (15 == sfb->fb.var.bits_per_pixel) + sfb->fb.var.bits_per_pixel = 16; + + sfb->fb.var.xres_virtual = sfb->fb.var.xres; + sfb->fb.var.yres_virtual = sfb->fb.var.yres; + err = smtc_map_smem(sfb, pdev, smem_size); + if (err) + goto failed; + + smtcfb_setmode(sfb); + /* Primary display starting from 0 postion */ + hw.BaseAddressInVRAM = 0; + sfb->fb.par = &hw; + + err = register_framebuffer(&sfb->fb); + if (err < 0) + goto failed; + + printk(KERN_INFO "Silicon Motion SM%X Rev%X primary display mode" + "%dx%d-%d Init Complete.\n", hw.chipID, hw.chipRevID, + sfb->fb.var.xres, sfb->fb.var.yres, + sfb->fb.var.bits_per_pixel); + + return 0; + + failed: + printk(KERN_INFO "Silicon Motion, Inc. primary display init fail\n"); + + smtc_unmap_smem(sfb); + smtc_unmap_mmio(sfb); + smtc_free_fb_info(sfb); + + return err; +} + + +/* Jason (08/11/2009) PCI_DRV wrapper essential structs */ +static struct pci_device_id smtcfb_pci_table[] = { + {0x126f, 0x710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x126f, 0x712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x126f, 0x720, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0,} +}; + + +/* Jason (08/14/2009) + * do some clean up when the driver module is removed + */ +static void __devexit smtcfb_pci_remove(struct pci_dev *pdev) +{ + struct smtcfb_info *sfb; + + sfb = pci_get_drvdata(pdev); + pci_set_drvdata(pdev, NULL); + smtc_unmap_smem(sfb); + smtc_unmap_mmio(sfb); + unregister_framebuffer(&sfb->fb); + smtc_free_fb_info(sfb); +} + +/* Jason (08/14/2009) + * suspend function, called when the suspend event is triggered + */ +static int __maybe_unused smtcfb_suspend(struct pci_dev *pdev, pm_message_t msg) +{ + struct smtcfb_info *sfb; + int retv; + + sfb = pci_get_drvdata(pdev); + + /* set the hw in sleep mode use externel clock and self memory refresh + * so that we can turn off internal PLLs later on + */ + smtc_seqw(0x20, (smtc_seqr(0x20) | 0xc0)); + smtc_seqw(0x69, (smtc_seqr(0x69) & 0xf7)); + + switch (msg.event) { + case PM_EVENT_FREEZE: + case PM_EVENT_PRETHAW: + pdev->dev.power.power_state = msg; + return 0; + } + + /* when doing suspend, call fb apis and pci apis */ + if (msg.event == PM_EVENT_SUSPEND) { + acquire_console_sem(); + fb_set_suspend(&sfb->fb, 1); + release_console_sem(); + retv = pci_save_state(pdev); + pci_disable_device(pdev); + retv = pci_choose_state(pdev, msg); + retv = pci_set_power_state(pdev, retv); + } + + pdev->dev.power.power_state = msg; + + /* additionaly turn off all function blocks including internal PLLs */ + smtc_seqw(0x21, 0xff); + + return 0; +} + +static int __maybe_unused smtcfb_resume(struct pci_dev *pdev) +{ + struct smtcfb_info *sfb; + int retv; + + sfb = pci_get_drvdata(pdev); + + /* when resuming, restore pci data and fb cursor */ + if (pdev->dev.power.power_state.event != PM_EVENT_FREEZE) { + retv = pci_set_power_state(pdev, PCI_D0); + retv = pci_restore_state(pdev); + if (pci_enable_device(pdev)) + return -1; + pci_set_master(pdev); + } + + /* reinit hardware */ + sm7xx_init_hw(); + switch (hw.chipID) { + case 0x710: + case 0x712: + /* set MCLK = 14.31818 * (0x16 / 0x2) */ + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x62, 0x3e); + /* enable PCI burst */ + smtc_seqw(0x17, 0x20); +#ifdef __BIG_ENDIAN + if (sfb->fb.var.bits_per_pixel == 32) + smtc_seqw(0x17, 0x30); +#endif + break; + case 0x720: + smtc_seqw(0x62, 0xff); + smtc_seqw(0x6a, 0x0d); + smtc_seqw(0x6b, 0x02); + break; + } + + smtc_seqw(0x34, (smtc_seqr(0x34) | 0xc0)); + smtc_seqw(0x33, ((smtc_seqr(0x33) | 0x08) & 0xfb)); + + smtcfb_setmode(sfb); + + acquire_console_sem(); + fb_set_suspend(&sfb->fb, 0); + release_console_sem(); + + return 0; +} + +/* Jason (08/13/2009) + * pci_driver struct used to wrap the original driver + * so that it can be registered into the kernel and + * the proper method would be called when suspending and resuming + */ +static struct pci_driver smtcfb_driver = { + .name = "smtcfb", + .id_table = smtcfb_pci_table, + .probe = smtcfb_pci_probe, + .remove = __devexit_p(smtcfb_pci_remove), +#ifdef CONFIG_PM + .suspend = smtcfb_suspend, + .resume = smtcfb_resume, +#endif +}; + +static int __init smtcfb_init(void) +{ + return pci_register_driver(&smtcfb_driver); +} + +static void __exit smtcfb_exit(void) +{ + pci_unregister_driver(&smtcfb_driver); +} + +module_init(smtcfb_init); +module_exit(smtcfb_exit); + +MODULE_AUTHOR("Siliconmotion "); +MODULE_DESCRIPTION("Framebuffer driver for SMI Graphic Cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/sm7xx/smtcfb.h b/drivers/staging/sm7xx/smtcfb.h new file mode 100644 index 00000000000..7f2c3413821 --- /dev/null +++ b/drivers/staging/sm7xx/smtcfb.h @@ -0,0 +1,793 @@ +/* + * Silicon Motion SM712 frame buffer device + * + * Copyright (C) 2006 Silicon Motion Technology Corp. + * Authors: Ge Wang, gewang@siliconmotion.com + * Boyod boyod.yang@siliconmotion.com.cn + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#define SMTC_LINUX_FB_VERSION "version 0.11.2619.21.01 July 27, 2008" + +#define NR_PALETTE 256 +#define NR_RGB 2 + +#define FB_ACCEL_SMI_LYNX 88 + +#ifdef __BIG_ENDIAN +#define PC_VGA 0 +#else +#define PC_VGA 1 +#endif + +#define SCREEN_X_RES 1024 +#define SCREEN_Y_RES 600 +#define SCREEN_BPP 16 + +#ifndef FIELD_OFFSET +#define FIELD_OFSFET(type, field) \ + ((unsigned long) (PUCHAR) & (((type *)0)->field)) +#endif + +/*Assume SM712 graphics chip has 4MB VRAM */ +#define SM712_VIDEOMEMORYSIZE 0x00400000 +/*Assume SM722 graphics chip has 8MB VRAM */ +#define SM722_VIDEOMEMORYSIZE 0x00800000 + +#define dac_reg (0x3c8) +#define dac_val (0x3c9) + +extern char *smtc_RegBaseAddress; +#define smtc_mmiowb(dat, reg) writeb(dat, smtc_RegBaseAddress + reg) +#define smtc_mmioww(dat, reg) writew(dat, smtc_RegBaseAddress + reg) +#define smtc_mmiowl(dat, reg) writel(dat, smtc_RegBaseAddress + reg) + +#define smtc_mmiorb(reg) readb(smtc_RegBaseAddress + reg) +#define smtc_mmiorw(reg) readw(smtc_RegBaseAddress + reg) +#define smtc_mmiorl(reg) readl(smtc_RegBaseAddress + reg) + +#define SIZE_SR00_SR04 (0x04 - 0x00 + 1) +#define SIZE_SR10_SR24 (0x24 - 0x10 + 1) +#define SIZE_SR30_SR75 (0x75 - 0x30 + 1) +#define SIZE_SR80_SR93 (0x93 - 0x80 + 1) +#define SIZE_SRA0_SRAF (0xAF - 0xA0 + 1) +#define SIZE_GR00_GR08 (0x08 - 0x00 + 1) +#define SIZE_AR00_AR14 (0x14 - 0x00 + 1) +#define SIZE_CR00_CR18 (0x18 - 0x00 + 1) +#define SIZE_CR30_CR4D (0x4D - 0x30 + 1) +#define SIZE_CR90_CRA7 (0xA7 - 0x90 + 1) +#define SIZE_VPR (0x6C + 1) +#define SIZE_DPR (0x44 + 1) + +static inline void smtc_crtcw(int reg, int val) +{ + smtc_mmiowb(reg, 0x3d4); + smtc_mmiowb(val, 0x3d5); +} + +static inline unsigned int smtc_crtcr(int reg) +{ + smtc_mmiowb(reg, 0x3d4); + return smtc_mmiorb(0x3d5); +} + +static inline void smtc_grphw(int reg, int val) +{ + smtc_mmiowb(reg, 0x3ce); + smtc_mmiowb(val, 0x3cf); +} + +static inline unsigned int smtc_grphr(int reg) +{ + smtc_mmiowb(reg, 0x3ce); + return smtc_mmiorb(0x3cf); +} + +static inline void smtc_attrw(int reg, int val) +{ + smtc_mmiorb(0x3da); + smtc_mmiowb(reg, 0x3c0); + smtc_mmiorb(0x3c1); + smtc_mmiowb(val, 0x3c0); +} + +static inline void smtc_seqw(int reg, int val) +{ + smtc_mmiowb(reg, 0x3c4); + smtc_mmiowb(val, 0x3c5); +} + +static inline unsigned int smtc_seqr(int reg) +{ + smtc_mmiowb(reg, 0x3c4); + return smtc_mmiorb(0x3c5); +} + +/* The next structure holds all information relevant for a specific video mode. + */ + +struct ModeInit { + int mmSizeX; + int mmSizeY; + int bpp; + int hz; + unsigned char Init_MISC; + unsigned char Init_SR00_SR04[SIZE_SR00_SR04]; + unsigned char Init_SR10_SR24[SIZE_SR10_SR24]; + unsigned char Init_SR30_SR75[SIZE_SR30_SR75]; + unsigned char Init_SR80_SR93[SIZE_SR80_SR93]; + unsigned char Init_SRA0_SRAF[SIZE_SRA0_SRAF]; + unsigned char Init_GR00_GR08[SIZE_GR00_GR08]; + unsigned char Init_AR00_AR14[SIZE_AR00_AR14]; + unsigned char Init_CR00_CR18[SIZE_CR00_CR18]; + unsigned char Init_CR30_CR4D[SIZE_CR30_CR4D]; + unsigned char Init_CR90_CRA7[SIZE_CR90_CRA7]; +}; + +/********************************************************************** + SM712 Mode table. + **********************************************************************/ +struct ModeInit VGAMode[] = { + { + /* mode#0: 640 x 480 16Bpp 60Hz */ + 640, 480, 16, 60, + /* Init_MISC */ + 0xE3, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x00, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, + 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, + 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, + 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, + 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, + 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, + 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, + 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, + 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, + 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, + }, + }, + { + /* mode#1: 640 x 480 24Bpp 60Hz */ + 640, 480, 24, 60, + /* Init_MISC */ + 0xE3, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x00, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, + 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, + 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, + 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, + 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, + 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, + 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, + 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, + 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, + 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, + }, + }, + { + /* mode#0: 640 x 480 32Bpp 60Hz */ + 640, 480, 32, 60, + /* Init_MISC */ + 0xE3, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x00, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, + 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, + 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, + 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, + 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, + 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, + 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, + 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, + 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, + 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, + }, + }, + + { /* mode#2: 800 x 600 16Bpp 60Hz */ + 800, 600, 16, 60, + /* Init_MISC */ + 0x2B, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x34, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24, + 0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24, + 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, + 0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24, + 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, + 0x02, 0x45, 0x30, 0x35, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24, + 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, + 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, + 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, + 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, + 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, + }, + }, + { /* mode#3: 800 x 600 24Bpp 60Hz */ + 800, 600, 24, 60, + 0x2B, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x36, 0x03, 0x20, 0x09, 0xC0, 0x36, 0x36, 0x36, + 0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x36, 0x36, 0x36, + 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, + 0x04, 0x55, 0x59, 0x36, 0x36, 0x00, 0x00, 0x36, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, + 0x02, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x36, + 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x36, 0x36, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, + 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, + 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, + 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, + 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, + }, + }, + { /* mode#7: 800 x 600 32Bpp 60Hz */ + 800, 600, 32, 60, + /* Init_MISC */ + 0x2B, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x34, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24, + 0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24, + 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, + 0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24, + 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, + 0x02, 0x45, 0x30, 0x35, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24, + 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, + 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, + 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, + 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, + 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, + }, + }, + /* We use 1024x768 table to light 1024x600 panel for lemote */ + { /* mode#4: 1024 x 600 16Bpp 60Hz */ + 1024, 600, 16, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x00, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xC8, 0x40, 0x14, 0x60, 0x00, 0x0A, 0x17, 0x20, + 0x51, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x00, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x22, 0x03, 0x24, 0x09, 0xC0, 0x22, 0x22, 0x22, + 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x22, 0x22, 0x22, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x22, 0x22, 0x00, 0x00, 0x22, + 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x16, 0x02, 0x0D, 0x82, 0x09, 0x02, + 0x04, 0x45, 0x3F, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0xA3, 0x7F, 0x00, 0x82, 0x0b, 0x6f, 0x57, 0x00, + 0x5c, 0x0f, 0xE0, 0xe0, 0x7F, 0x57, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, + { /* mode#5: 1024 x 768 24Bpp 60Hz */ + 1024, 768, 24, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x3B, 0x0D, 0x09, 0x02, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0xA3, 0x7F, 0x00, 0x86, 0x15, 0x24, 0xFF, 0x00, + 0x01, 0x07, 0xE5, 0x20, 0x7F, 0xFF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, + { /* mode#4: 1024 x 768 32Bpp 60Hz */ + 1024, 768, 32, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x32, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x3B, 0x0D, 0x09, 0x02, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0xA3, 0x7F, 0x00, 0x86, 0x15, 0x24, 0xFF, 0x00, + 0x01, 0x07, 0xE5, 0x20, 0x7F, 0xFF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, + { /* mode#6: 320 x 240 16Bpp 60Hz */ + 320, 240, 16, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x32, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x08, 0x43, 0x08, 0x43, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x30, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0x2E, 0x27, 0x00, 0x2b, 0x0c, 0x0F, 0xEF, 0x00, + 0xFe, 0x0f, 0x01, 0xC0, 0x27, 0xEF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, + + { /* mode#8: 320 x 240 32Bpp 60Hz */ + 320, 240, 32, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x32, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x08, 0x43, 0x08, 0x43, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x30, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0x2E, 0x27, 0x00, 0x2b, 0x0c, 0x0F, 0xEF, 0x00, + 0xFe, 0x0f, 0x01, 0xC0, 0x27, 0xEF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, +}; + +#define numVGAModes (sizeof(VGAMode) / sizeof(struct ModeInit)) diff --git a/drivers/staging/vt6655/Kconfig b/drivers/staging/vt6655/Kconfig index 825bbc4fc3f..061e730df2d 100644 --- a/drivers/staging/vt6655/Kconfig +++ b/drivers/staging/vt6655/Kconfig @@ -1,6 +1,6 @@ config VT6655 tristate "VIA Technologies VT6655 support" - depends on PCI + depends on PCI && WLAN select WIRELESS_EXT select WEXT_PRIV ---help--- diff --git a/drivers/staging/vt6656/Kconfig b/drivers/staging/vt6656/Kconfig index 87bcd269310..1055b526c53 100644 --- a/drivers/staging/vt6656/Kconfig +++ b/drivers/staging/vt6656/Kconfig @@ -1,6 +1,6 @@ config VT6656 tristate "VIA Technologies VT6656 support" - depends on USB + depends on USB && WLAN select WIRELESS_EXT select WEXT_PRIV ---help--- diff --git a/drivers/staging/wlan-ng/prism2fw.c b/drivers/staging/wlan-ng/prism2fw.c index 7d76a7f92a3..aaa70ed5771 100644 --- a/drivers/staging/wlan-ng/prism2fw.c +++ b/drivers/staging/wlan-ng/prism2fw.c @@ -439,7 +439,7 @@ void free_chunks(imgchunk_t *fchunk, unsigned int *nfchunks) } } *nfchunks = 0; - memset(fchunk, 0, sizeof(fchunk)); + memset(fchunk, 0, sizeof(*fchunk)); } diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 473aa1a20de..be3c9b80bc9 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -44,5 +44,3 @@ obj-y += early/ obj-$(CONFIG_USB_ATM) += atm/ obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ - -obj-$(CONFIG_USB_ULPI) += otg/ diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 6dac3b802d4..0495fa65122 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1597,7 +1597,9 @@ rescan: } /** - * Check whether a new bandwidth setting exceeds the bus bandwidth. + * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds + * the bus bandwidth + * @udev: target &usb_device * @new_config: new configuration to install * @cur_alt: the current alternate interface setting * @new_alt: alternate interface setting that is being installed diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 06af970e106..0cec6caf6e9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1658,12 +1658,12 @@ static inline void announce_device(struct usb_device *udev) { } #endif /** - * usb_configure_device_otg - FIXME (usbcore-internal) + * usb_enumerate_device_otg - FIXME (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * Do configuration for On-The-Go devices + * Finish enumeration for On-The-Go devices */ -static int usb_configure_device_otg(struct usb_device *udev) +static int usb_enumerate_device_otg(struct usb_device *udev) { int err = 0; @@ -1734,7 +1734,7 @@ fail: /** - * usb_configure_device - Detect and probe device intfs/otg (usbcore-internal) + * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * * This is only called by usb_new_device() and usb_authorize_device() @@ -1745,7 +1745,7 @@ fail: * the string descriptors, as they will be errored out by the device * until it has been authorized. */ -static int usb_configure_device(struct usb_device *udev) +static int usb_enumerate_device(struct usb_device *udev) { int err; @@ -1769,7 +1769,7 @@ static int usb_configure_device(struct usb_device *udev) udev->descriptor.iManufacturer); udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber); } - err = usb_configure_device_otg(udev); + err = usb_enumerate_device_otg(udev); fail: return err; } @@ -1779,8 +1779,8 @@ fail: * usb_new_device - perform initial device setup (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * This is called with devices which have been enumerated, but not yet - * configured. The device descriptor is available, but not descriptors + * This is called with devices which have been detected but not fully + * enumerated. The device descriptor is available, but not descriptors * for any device configuration. The caller must have locked either * the parent hub (if udev is a normal device) or else the * usb_bus_list_lock (if udev is a root hub). The parent's pointer to @@ -1803,8 +1803,8 @@ int usb_new_device(struct usb_device *udev) if (udev->parent) usb_autoresume_device(udev->parent); - usb_detect_quirks(udev); /* Determine quirks */ - err = usb_configure_device(udev); /* detect & probe dev/intfs */ + usb_detect_quirks(udev); + err = usb_enumerate_device(udev); /* Read descriptors */ if (err < 0) goto fail; dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n", @@ -1849,21 +1849,23 @@ fail: */ int usb_deauthorize_device(struct usb_device *usb_dev) { - unsigned cnt; usb_lock_device(usb_dev); if (usb_dev->authorized == 0) goto out_unauthorized; + usb_dev->authorized = 0; usb_set_configuration(usb_dev, -1); + + kfree(usb_dev->product); usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL); + kfree(usb_dev->manufacturer); usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL); + kfree(usb_dev->serial); usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL); - kfree(usb_dev->config); - usb_dev->config = NULL; - for (cnt = 0; cnt < usb_dev->descriptor.bNumConfigurations; cnt++) - kfree(usb_dev->rawdescriptors[cnt]); + + usb_destroy_configuration(usb_dev); usb_dev->descriptor.bNumConfigurations = 0; - kfree(usb_dev->rawdescriptors); + out_unauthorized: usb_unlock_device(usb_dev); return 0; @@ -1873,15 +1875,11 @@ out_unauthorized: int usb_authorize_device(struct usb_device *usb_dev) { int result = 0, c; + usb_lock_device(usb_dev); if (usb_dev->authorized == 1) goto out_authorized; - kfree(usb_dev->product); - usb_dev->product = NULL; - kfree(usb_dev->manufacturer); - usb_dev->manufacturer = NULL; - kfree(usb_dev->serial); - usb_dev->serial = NULL; + result = usb_autoresume_device(usb_dev); if (result < 0) { dev_err(&usb_dev->dev, @@ -1894,10 +1892,18 @@ int usb_authorize_device(struct usb_device *usb_dev) "authorization: %d\n", result); goto error_device_descriptor; } + + kfree(usb_dev->product); + usb_dev->product = NULL; + kfree(usb_dev->manufacturer); + usb_dev->manufacturer = NULL; + kfree(usb_dev->serial); + usb_dev->serial = NULL; + usb_dev->authorized = 1; - result = usb_configure_device(usb_dev); + result = usb_enumerate_device(usb_dev); if (result < 0) - goto error_configure; + goto error_enumerate; /* Choose and set the configuration. This registers the interfaces * with the driver core and lets interface drivers bind to them. */ @@ -1912,8 +1918,10 @@ int usb_authorize_device(struct usb_device *usb_dev) } } dev_info(&usb_dev->dev, "authorized to connect\n"); -error_configure: + +error_enumerate: error_device_descriptor: + usb_autosuspend_device(usb_dev); error_autoresume: out_authorized: usb_unlock_device(usb_dev); // complements locktree diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 15477008b63..485edf937f2 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -82,9 +82,13 @@ static ssize_t show_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ struct usb_device *udev; \ + int retval; \ \ udev = to_usb_device(dev); \ - return sprintf(buf, "%s\n", udev->name); \ + usb_lock_device(udev); \ + retval = sprintf(buf, "%s\n", udev->name); \ + usb_unlock_device(udev); \ + return retval; \ } \ static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 2fb42043b30..0daff0d968b 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -66,9 +66,9 @@ MODULE_PARM_DESC(autosuspend, "default autosuspend delay"); /** * usb_find_alt_setting() - Given a configuration, find the alternate setting * for the given interface. - * @config - the configuration to search (not necessarily the current config). - * @iface_num - interface number to search in - * @alt_num - alternate interface setting number to search for. + * @config: the configuration to search (not necessarily the current config). + * @iface_num: interface number to search in + * @alt_num: alternate interface setting number to search for. * * Search the configuration's interface cache for the given alt setting. */ diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 1206a26ef89..2958a1271b2 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -613,7 +613,7 @@ err: } EXPORT_SYMBOL_GPL(dbgp_external_startup); -static int __init ehci_reset_port(int port) +static int ehci_reset_port(int port) { u32 portsc; u32 delay_time, delay; diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c index 58f22032384..a62af7b5909 100644 --- a/drivers/usb/gadget/audio.c +++ b/drivers/usb/gadget/audio.c @@ -158,6 +158,7 @@ fail: static int __exit audio_unbind(struct usb_composite_dev *cdev) { + gaudio_cleanup(); return 0; } diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index c43c89ffa2c..df77f6131c7 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -56,13 +56,16 @@ static struct usb_interface_descriptor ac_interface_desc __initdata = { DECLARE_UAC_AC_HEADER_DESCRIPTOR(2); #define UAC_DT_AC_HEADER_LENGTH UAC_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES) +/* 1 input terminal, 1 output terminal and 1 feature unit */ +#define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \ + + UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0)) /* B.3.2 Class-Specific AC Interface Descriptor */ static struct uac_ac_header_descriptor_2 ac_header_desc = { .bLength = UAC_DT_AC_HEADER_LENGTH, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_HEADER, .bcdADC = __constant_cpu_to_le16(0x0100), - .wTotalLength = __constant_cpu_to_le16(UAC_DT_AC_HEADER_LENGTH), + .wTotalLength = __constant_cpu_to_le16(UAC_DT_TOTAL_LENGTH), .bInCollection = F_AUDIO_NUM_INTERFACES, .baInterfaceNr = { [0] = F_AUDIO_AC_INTERFACE, @@ -252,12 +255,12 @@ static struct f_audio_buf *f_audio_buffer_alloc(int buf_size) copy_buf = kzalloc(sizeof *copy_buf, GFP_ATOMIC); if (!copy_buf) - return (struct f_audio_buf *)-ENOMEM; + return ERR_PTR(-ENOMEM); copy_buf->buf = kzalloc(buf_size, GFP_ATOMIC); if (!copy_buf->buf) { kfree(copy_buf); - return (struct f_audio_buf *)-ENOMEM; + return ERR_PTR(-ENOMEM); } return copy_buf; @@ -332,7 +335,7 @@ static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req) list_add_tail(©_buf->list, &audio->play_queue); schedule_work(&audio->playback_work); copy_buf = f_audio_buffer_alloc(audio_buf_size); - if (copy_buf < 0) + if (IS_ERR(copy_buf)) return -ENOMEM; } @@ -576,6 +579,8 @@ static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt) usb_ep_enable(out_ep, audio->out_desc); out_ep->driver_data = audio; audio->copy_buf = f_audio_buffer_alloc(audio_buf_size); + if (IS_ERR(audio->copy_buf)) + return -ENOMEM; /* * allocate a bunch of read buffers @@ -787,7 +792,7 @@ int __init audio_bind_config(struct usb_configuration *c) return status; add_fail: - gaudio_cleanup(&audio->card); + gaudio_cleanup(); setup_fail: kfree(audio); return status; diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c index 8252595d619..35e0930f5bb 100644 --- a/drivers/usb/gadget/u_audio.c +++ b/drivers/usb/gadget/u_audio.c @@ -288,6 +288,7 @@ static int gaudio_close_snd_dev(struct gaudio *gau) return 0; } +static struct gaudio *the_card; /** * gaudio_setup - setup ALSA interface and preparing for USB transfer * @@ -303,6 +304,9 @@ int __init gaudio_setup(struct gaudio *card) if (ret) ERROR(card, "we need at least one control device\n"); + if (!the_card) + the_card = card; + return ret; } @@ -312,9 +316,11 @@ int __init gaudio_setup(struct gaudio *card) * * This is called to free all resources allocated by @gaudio_setup(). */ -void gaudio_cleanup(struct gaudio *card) +void gaudio_cleanup(void) { - if (card) - gaudio_close_snd_dev(card); + if (the_card) { + gaudio_close_snd_dev(the_card); + the_card = NULL; + } } diff --git a/drivers/usb/gadget/u_audio.h b/drivers/usb/gadget/u_audio.h index cc8d159c648..08ffce3298e 100644 --- a/drivers/usb/gadget/u_audio.h +++ b/drivers/usb/gadget/u_audio.h @@ -51,6 +51,6 @@ struct gaudio { }; int gaudio_setup(struct gaudio *card); -void gaudio_cleanup(struct gaudio *card); +void gaudio_cleanup(void); #endif /* __U_AUDIO_H */ diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 1d8e39a557d..1eb9e4162cc 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -60,6 +60,7 @@ static struct usb_device_id appledisplay_table [] = { { APPLEDISPLAY_DEVICE(0x9218) }, { APPLEDISPLAY_DEVICE(0x9219) }, + { APPLEDISPLAY_DEVICE(0x921c) }, { APPLEDISPLAY_DEVICE(0x921d) }, /* Terminating entry */ @@ -72,8 +73,8 @@ struct appledisplay { struct usb_device *udev; /* usb device */ struct urb *urb; /* usb request block */ struct backlight_device *bd; /* backlight device */ - char *urbdata; /* interrupt URB data buffer */ - char *msgdata; /* control message data buffer */ + u8 *urbdata; /* interrupt URB data buffer */ + u8 *msgdata; /* control message data buffer */ struct delayed_work work; int button_pressed; diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 602ee05ba9f..59860b32853 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -167,7 +167,7 @@ static int emi62_load_firmware (struct usb_device *dev) err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } - } while (i > 0); + } while (rec); /* Assert reset (stop the CPU in the EMI) */ err = emi62_set_reset(dev,1); diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index fe4934d9602..ad26e656966 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -29,6 +29,8 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) { void __iomem *fifo = hw_ep->fifo; void __iomem *epio = hw_ep->regs; + u8 epnum = hw_ep->epnum; + u16 dma_reg = 0; prefetch((u8 *)src); @@ -39,67 +41,113 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) dump_fifo_data(src, len); - if (unlikely((unsigned long)src & 0x01)) - outsw_8((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); - else - outsw((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); -} + if (!ANOMALY_05000380 && epnum != 0) { + flush_dcache_range((unsigned int)src, + (unsigned int)(src + len)); + + /* Setup DMA address register */ + dma_reg = (u16) ((u32) src & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); + SSYNC(); + + dma_reg = (u16) (((u32) src >> 16) & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); + SSYNC(); + + /* Setup DMA count register */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); + SSYNC(); + + /* Enable the DMA */ + dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION; + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); + SSYNC(); + + /* Wait for compelete */ + while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) + cpu_relax(); + + /* acknowledge dma interrupt */ + bfin_write_USB_DMA_INTERRUPT(1 << epnum); + SSYNC(); + + /* Reset DMA */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); + SSYNC(); + } else { + SSYNC(); + + if (unlikely((unsigned long)src & 0x01)) + outsw_8((unsigned long)fifo, src, + len & 0x01 ? (len >> 1) + 1 : len >> 1); + else + outsw((unsigned long)fifo, src, + len & 0x01 ? (len >> 1) + 1 : len >> 1); + } +} /* * Unload an endpoint's FIFO */ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) { void __iomem *fifo = hw_ep->fifo; - -#ifdef CONFIG_BF52x u8 epnum = hw_ep->epnum; u16 dma_reg = 0; - invalidate_dcache_range((unsigned int)dst, - (unsigned int)(dst + len)); + if (ANOMALY_05000467 && epnum != 0) { - /* Setup DMA address register */ - dma_reg = (u16) ((u32) dst & 0xFFFF); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); - SSYNC(); + invalidate_dcache_range((unsigned int)dst, + (unsigned int)(dst + len)); - dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); - SSYNC(); + /* Setup DMA address register */ + dma_reg = (u16) ((u32) dst & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); + SSYNC(); - /* Setup DMA count register */ - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); - SSYNC(); + dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); + SSYNC(); - /* Enable the DMA */ - dma_reg = (epnum << 4) | DMA_ENA | INT_ENA; - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); - SSYNC(); + /* Setup DMA count register */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); + SSYNC(); - /* Wait for compelete */ - while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) - cpu_relax(); + /* Enable the DMA */ + dma_reg = (epnum << 4) | DMA_ENA | INT_ENA; + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); + SSYNC(); - /* acknowledge dma interrupt */ - bfin_write_USB_DMA_INTERRUPT(1 << epnum); - SSYNC(); + /* Wait for compelete */ + while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) + cpu_relax(); - /* Reset DMA */ - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); - SSYNC(); -#else - if (unlikely((unsigned long)dst & 0x01)) - insw_8((unsigned long)fifo, dst, - len & 0x01 ? (len >> 1) + 1 : len >> 1); - else - insw((unsigned long)fifo, dst, - len & 0x01 ? (len >> 1) + 1 : len >> 1); -#endif + /* acknowledge dma interrupt */ + bfin_write_USB_DMA_INTERRUPT(1 << epnum); + SSYNC(); + /* Reset DMA */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); + SSYNC(); + } else { + SSYNC(); + /* Read the last byte of packet with odd size from address fifo + 4 + * to trigger 1 byte access to EP0 FIFO. + */ + if (len == 1) + *dst = (u8)inw((unsigned long)fifo + 4); + else { + if (unlikely((unsigned long)dst & 0x01)) + insw_8((unsigned long)fifo, dst, len >> 1); + else + insw((unsigned long)fifo, dst, len >> 1); + + if (len & 0x01) + *(dst + len - 1) = (u8)inw((unsigned long)fifo + 4); + } + } DBG(4, "%cX ep%d fifo %p count %d buf %p\n", 'R', hw_ep->epnum, fifo, len, dst); diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h index 10b7d7584f4..bd9352a2ef2 100644 --- a/drivers/usb/musb/blackfin.h +++ b/drivers/usb/musb/blackfin.h @@ -69,7 +69,6 @@ static void dump_fifo_data(u8 *buf, u16 len) #define dump_fifo_data(buf, len) do {} while (0) #endif -#ifdef CONFIG_BF52x #define USB_DMA_BASE USB_DMA_INTERRUPT #define USB_DMAx_CTRL 0x04 @@ -79,7 +78,6 @@ static void dump_fifo_data(u8 *buf, u16 len) #define USB_DMAx_COUNT_HIGH 0x14 #define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg) -#endif /* Almost 1 second */ #define TIMER_DELAY (1 * HZ) diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index ef2332a9941..a44a450c860 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1154,8 +1154,11 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) struct musb_hw_ep *hw_ep = NULL; u32 rx, tx; int i, index; + unsigned long flags; cppi = container_of(musb->dma_controller, struct cppi, controller); + if (cppi->irq) + spin_lock_irqsave(&musb->lock, flags); tibase = musb->ctrl_base; @@ -1285,6 +1288,9 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) /* write to CPPI EOI register to re-enable interrupts */ musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0); + if (cppi->irq) + spin_unlock_irqrestore(&musb->lock, flags); + return IRQ_HANDLED; } diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index e16ff605c45..66913811af5 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -42,7 +42,7 @@ #include "musb_core.h" #ifdef CONFIG_MACH_DAVINCI_EVM -#define GPIO_nVBUS_DRV 144 +#define GPIO_nVBUS_DRV 160 #endif #include "davinci.h" diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index bfe08f4975a..5eb9318cff7 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1319,7 +1319,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) #endif u8 reg; char *type; - char aInfo[78], aRevision[32], aDate[12]; + char aInfo[90], aRevision[32], aDate[12]; void __iomem *mbase = musb->mregs; int status = 0; int i; @@ -1521,6 +1521,14 @@ irqreturn_t musb_interrupt(struct musb *musb) (devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral", musb->int_usb, musb->int_tx, musb->int_rx); +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + if (is_otg_enabled(musb) || is_peripheral_enabled(musb)) + if (!musb->gadget_driver) { + DBG(5, "No gadget driver loaded\n"); + return IRQ_HANDLED; + } +#endif + /* the core can interrupt us for multiple reasons; docs have * a generic interrupt flowchart to follow */ @@ -2139,7 +2147,7 @@ static int __init musb_probe(struct platform_device *pdev) return musb_init_controller(dev, irq, base); } -static int __devexit musb_remove(struct platform_device *pdev) +static int __exit musb_remove(struct platform_device *pdev) { struct musb *musb = dev_to_musb(&pdev->dev); void __iomem *ctrl_base = musb->ctrl_base; @@ -2231,7 +2239,7 @@ static struct platform_driver musb_driver = { .owner = THIS_MODULE, .pm = MUSB_DEV_PM_OPS, }, - .remove = __devexit_p(musb_remove), + .remove = __exit_p(musb_remove), .shutdown = musb_shutdown, }; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index c49b9ba025a..cbcf14a236e 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -309,7 +309,7 @@ static void txstate(struct musb *musb, struct musb_request *req) size_t request_size; /* setup DMA, then program endpoint CSR */ - request_size = min(request->length, + request_size = min_t(size_t, request->length, musb_ep->dma->max_len); if (request_size < musb_ep->packet_sz) musb_ep->dma->desired_mode = 0; @@ -319,7 +319,7 @@ static void txstate(struct musb *musb, struct musb_request *req) use_dma = use_dma && c->channel_program( musb_ep->dma, musb_ep->packet_sz, musb_ep->dma->desired_mode, - request->dma, request_size); + request->dma + request->actual, request_size); if (use_dma) { if (musb_ep->dma->desired_mode == 0) { /* @@ -515,12 +515,12 @@ void musb_g_tx(struct musb *musb, u8 epnum) if (csr & MUSB_TXCSR_FIFONOTEMPTY) return; - if (!musb_ep->desc) { + request = musb_ep->desc ? next_request(musb_ep) : NULL; + if (!request) { DBG(4, "%s idle now\n", musb_ep->end_point.name); return; - } else - request = next_request(musb_ep); + } } txstate(musb, to_musb_request(request)); @@ -746,6 +746,8 @@ void musb_g_rx(struct musb *musb, u8 epnum) musb_ep_select(mbase, epnum); request = next_request(musb_ep); + if (!request) + return; csr = musb_readw(epio, MUSB_RXCSR); dma = is_dma_capable() ? musb_ep->dma : NULL; @@ -1731,6 +1733,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) spin_lock_irqsave(&musb->lock, flags); otg_set_peripheral(musb->xceiv, &musb->g); + musb->xceiv->state = OTG_STATE_B_IDLE; musb->is_active = 1; /* FIXME this ignores the softconnect flag. Drivers are diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 8fba3f11e47..53d06451f82 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -664,7 +664,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; break; default: - ERR("SetupEnd came in a wrong ep0stage %s", + ERR("SetupEnd came in a wrong ep0stage %s\n", decode_ep0stage(musb->ep0_state)); } csr = musb_readw(regs, MUSB_CSR0); @@ -787,12 +787,18 @@ setup: handled = service_zero_data_request( musb, &setup); + /* + * We're expecting no data in any case, so + * always set the DATAEND bit -- doing this + * here helps avoid SetupEnd interrupt coming + * in the idle stage when we're stalling... + */ + musb->ackpend |= MUSB_CSR0_P_DATAEND; + /* status stage might be immediate */ - if (handled > 0) { - musb->ackpend |= MUSB_CSR0_P_DATAEND; + if (handled > 0) musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; - } break; /* sequence #1 (IN to host), includes GET_STATUS diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index d54460a8817..78a20970926 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -843,7 +843,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp) static struct platform_device *otg_dev; -static int otg_init(struct isp1301 *isp) +static int isp1301_otg_init(struct isp1301 *isp) { u32 l; @@ -1275,7 +1275,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c) static int isp1301_otg_enable(struct isp1301 *isp) { power_up(isp); - otg_init(isp); + isp1301_otg_init(isp); /* NOTE: since we don't change this, this provides * a few more interrupts than are strictly needed. diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f99498fca99..216f187582a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -44,6 +44,7 @@ #include <linux/serial.h> #include <linux/usb/serial.h> #include "ftdi_sio.h" +#include "ftdi_sio_ids.h" /* * Version Information diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 4586a24fafb..b0e0d64f822 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -1,7 +1,10 @@ /* - * Definitions for the FTDI USB Single Port Serial Converter - + * Driver definitions for the FTDI USB Single Port Serial Converter - * known as FTDI_SIO (Serial Input/Output application of the chipset) * + * For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h + * + * * The example I have is known as the USC-1000 which is available from * http://www.dse.co.nz - cat no XH4214 It looks similar to this: * http://www.dansdata.com/usbser.htm but I can't be sure There are other @@ -17,880 +20,7 @@ * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the * FTDI_SIO implementation. * - * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais - * from Rudolf Gugler - * - */ - -#define FTDI_VID 0x0403 /* Vendor Id */ -#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ -#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ -#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ -#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ -#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ -#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ -#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ -#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ -#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ -#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ - -/* Larsen and Brusgaard AltiTrack/USBtrack */ -#define LARSENBRUSGAARD_VID 0x0FD8 -#define LB_ALTITRACK_PID 0x0001 - -/* www.canusb.com Lawicel CANUSB device */ -#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ - -/* AlphaMicro Components AMC-232USB01 device */ -#define FTDI_AMC232_PID 0xFF00 /* Product Id */ - -/* www.candapter.com Ewert Energy Systems CANdapter device */ -#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ - -/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ -/* the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ -#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ -#define FTDI_SCS_DEVICE_2_PID 0xD012 -#define FTDI_SCS_DEVICE_3_PID 0xD013 -#define FTDI_SCS_DEVICE_4_PID 0xD014 -#define FTDI_SCS_DEVICE_5_PID 0xD015 -#define FTDI_SCS_DEVICE_6_PID 0xD016 -#define FTDI_SCS_DEVICE_7_PID 0xD017 - -/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ -#define FTDI_ACTZWAVE_PID 0xF2D0 - - -/* www.starting-point-systems.com µChameleon device */ -#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ - -/* www.irtrans.de device */ -#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ - - -/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ -#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ - -/* iPlus device */ -#define FTDI_IPLUS_PID 0xD070 /* Product Id */ -#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ - -/* DMX4ALL DMX Interfaces */ -#define FTDI_DMX4ALL 0xC850 - -/* OpenDCC (www.opendcc.de) product id */ -#define FTDI_OPENDCC_PID 0xBFD8 -#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 -#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA -#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB - -/* Sprog II (Andrew Crosland's SprogII DCC interface) */ -#define FTDI_SPROG_II 0xF0C8 - -/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ -/* they use the ftdi chipset for the USB interface and the vendor id is the same */ -#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ -#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ -#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ -#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ -#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ -#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ -#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ -#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ - -/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ -/* broadband internet service. The following PID is exhibited by the usb device supplied */ -/* (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ - -/* - * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device - * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) - * (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_PCDJ_DAC2_PID 0xFA88 - -/* - * The following are the values for the Matrix Orbital LCD displays, - * which are the FT232BM ( similar to the 8U232AM ) - */ -#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ - -/* OOCDlink by Joern Kaipf <joernk@web.de> - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ -#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ - -/* - * The following are the values for the Matrix Orbital FTDI Range - * Anything in this range will use an FT232RL. - */ -#define MTXORB_VID 0x1B3D -#define MTXORB_FTDI_RANGE_0100_PID 0x0100 -#define MTXORB_FTDI_RANGE_0101_PID 0x0101 -#define MTXORB_FTDI_RANGE_0102_PID 0x0102 -#define MTXORB_FTDI_RANGE_0103_PID 0x0103 -#define MTXORB_FTDI_RANGE_0104_PID 0x0104 -#define MTXORB_FTDI_RANGE_0105_PID 0x0105 -#define MTXORB_FTDI_RANGE_0106_PID 0x0106 -#define MTXORB_FTDI_RANGE_0107_PID 0x0107 -#define MTXORB_FTDI_RANGE_0108_PID 0x0108 -#define MTXORB_FTDI_RANGE_0109_PID 0x0109 -#define MTXORB_FTDI_RANGE_010A_PID 0x010A -#define MTXORB_FTDI_RANGE_010B_PID 0x010B -#define MTXORB_FTDI_RANGE_010C_PID 0x010C -#define MTXORB_FTDI_RANGE_010D_PID 0x010D -#define MTXORB_FTDI_RANGE_010E_PID 0x010E -#define MTXORB_FTDI_RANGE_010F_PID 0x010F -#define MTXORB_FTDI_RANGE_0110_PID 0x0110 -#define MTXORB_FTDI_RANGE_0111_PID 0x0111 -#define MTXORB_FTDI_RANGE_0112_PID 0x0112 -#define MTXORB_FTDI_RANGE_0113_PID 0x0113 -#define MTXORB_FTDI_RANGE_0114_PID 0x0114 -#define MTXORB_FTDI_RANGE_0115_PID 0x0115 -#define MTXORB_FTDI_RANGE_0116_PID 0x0116 -#define MTXORB_FTDI_RANGE_0117_PID 0x0117 -#define MTXORB_FTDI_RANGE_0118_PID 0x0118 -#define MTXORB_FTDI_RANGE_0119_PID 0x0119 -#define MTXORB_FTDI_RANGE_011A_PID 0x011A -#define MTXORB_FTDI_RANGE_011B_PID 0x011B -#define MTXORB_FTDI_RANGE_011C_PID 0x011C -#define MTXORB_FTDI_RANGE_011D_PID 0x011D -#define MTXORB_FTDI_RANGE_011E_PID 0x011E -#define MTXORB_FTDI_RANGE_011F_PID 0x011F -#define MTXORB_FTDI_RANGE_0120_PID 0x0120 -#define MTXORB_FTDI_RANGE_0121_PID 0x0121 -#define MTXORB_FTDI_RANGE_0122_PID 0x0122 -#define MTXORB_FTDI_RANGE_0123_PID 0x0123 -#define MTXORB_FTDI_RANGE_0124_PID 0x0124 -#define MTXORB_FTDI_RANGE_0125_PID 0x0125 -#define MTXORB_FTDI_RANGE_0126_PID 0x0126 -#define MTXORB_FTDI_RANGE_0127_PID 0x0127 -#define MTXORB_FTDI_RANGE_0128_PID 0x0128 -#define MTXORB_FTDI_RANGE_0129_PID 0x0129 -#define MTXORB_FTDI_RANGE_012A_PID 0x012A -#define MTXORB_FTDI_RANGE_012B_PID 0x012B -#define MTXORB_FTDI_RANGE_012C_PID 0x012C -#define MTXORB_FTDI_RANGE_012D_PID 0x012D -#define MTXORB_FTDI_RANGE_012E_PID 0x012E -#define MTXORB_FTDI_RANGE_012F_PID 0x012F -#define MTXORB_FTDI_RANGE_0130_PID 0x0130 -#define MTXORB_FTDI_RANGE_0131_PID 0x0131 -#define MTXORB_FTDI_RANGE_0132_PID 0x0132 -#define MTXORB_FTDI_RANGE_0133_PID 0x0133 -#define MTXORB_FTDI_RANGE_0134_PID 0x0134 -#define MTXORB_FTDI_RANGE_0135_PID 0x0135 -#define MTXORB_FTDI_RANGE_0136_PID 0x0136 -#define MTXORB_FTDI_RANGE_0137_PID 0x0137 -#define MTXORB_FTDI_RANGE_0138_PID 0x0138 -#define MTXORB_FTDI_RANGE_0139_PID 0x0139 -#define MTXORB_FTDI_RANGE_013A_PID 0x013A -#define MTXORB_FTDI_RANGE_013B_PID 0x013B -#define MTXORB_FTDI_RANGE_013C_PID 0x013C -#define MTXORB_FTDI_RANGE_013D_PID 0x013D -#define MTXORB_FTDI_RANGE_013E_PID 0x013E -#define MTXORB_FTDI_RANGE_013F_PID 0x013F -#define MTXORB_FTDI_RANGE_0140_PID 0x0140 -#define MTXORB_FTDI_RANGE_0141_PID 0x0141 -#define MTXORB_FTDI_RANGE_0142_PID 0x0142 -#define MTXORB_FTDI_RANGE_0143_PID 0x0143 -#define MTXORB_FTDI_RANGE_0144_PID 0x0144 -#define MTXORB_FTDI_RANGE_0145_PID 0x0145 -#define MTXORB_FTDI_RANGE_0146_PID 0x0146 -#define MTXORB_FTDI_RANGE_0147_PID 0x0147 -#define MTXORB_FTDI_RANGE_0148_PID 0x0148 -#define MTXORB_FTDI_RANGE_0149_PID 0x0149 -#define MTXORB_FTDI_RANGE_014A_PID 0x014A -#define MTXORB_FTDI_RANGE_014B_PID 0x014B -#define MTXORB_FTDI_RANGE_014C_PID 0x014C -#define MTXORB_FTDI_RANGE_014D_PID 0x014D -#define MTXORB_FTDI_RANGE_014E_PID 0x014E -#define MTXORB_FTDI_RANGE_014F_PID 0x014F -#define MTXORB_FTDI_RANGE_0150_PID 0x0150 -#define MTXORB_FTDI_RANGE_0151_PID 0x0151 -#define MTXORB_FTDI_RANGE_0152_PID 0x0152 -#define MTXORB_FTDI_RANGE_0153_PID 0x0153 -#define MTXORB_FTDI_RANGE_0154_PID 0x0154 -#define MTXORB_FTDI_RANGE_0155_PID 0x0155 -#define MTXORB_FTDI_RANGE_0156_PID 0x0156 -#define MTXORB_FTDI_RANGE_0157_PID 0x0157 -#define MTXORB_FTDI_RANGE_0158_PID 0x0158 -#define MTXORB_FTDI_RANGE_0159_PID 0x0159 -#define MTXORB_FTDI_RANGE_015A_PID 0x015A -#define MTXORB_FTDI_RANGE_015B_PID 0x015B -#define MTXORB_FTDI_RANGE_015C_PID 0x015C -#define MTXORB_FTDI_RANGE_015D_PID 0x015D -#define MTXORB_FTDI_RANGE_015E_PID 0x015E -#define MTXORB_FTDI_RANGE_015F_PID 0x015F -#define MTXORB_FTDI_RANGE_0160_PID 0x0160 -#define MTXORB_FTDI_RANGE_0161_PID 0x0161 -#define MTXORB_FTDI_RANGE_0162_PID 0x0162 -#define MTXORB_FTDI_RANGE_0163_PID 0x0163 -#define MTXORB_FTDI_RANGE_0164_PID 0x0164 -#define MTXORB_FTDI_RANGE_0165_PID 0x0165 -#define MTXORB_FTDI_RANGE_0166_PID 0x0166 -#define MTXORB_FTDI_RANGE_0167_PID 0x0167 -#define MTXORB_FTDI_RANGE_0168_PID 0x0168 -#define MTXORB_FTDI_RANGE_0169_PID 0x0169 -#define MTXORB_FTDI_RANGE_016A_PID 0x016A -#define MTXORB_FTDI_RANGE_016B_PID 0x016B -#define MTXORB_FTDI_RANGE_016C_PID 0x016C -#define MTXORB_FTDI_RANGE_016D_PID 0x016D -#define MTXORB_FTDI_RANGE_016E_PID 0x016E -#define MTXORB_FTDI_RANGE_016F_PID 0x016F -#define MTXORB_FTDI_RANGE_0170_PID 0x0170 -#define MTXORB_FTDI_RANGE_0171_PID 0x0171 -#define MTXORB_FTDI_RANGE_0172_PID 0x0172 -#define MTXORB_FTDI_RANGE_0173_PID 0x0173 -#define MTXORB_FTDI_RANGE_0174_PID 0x0174 -#define MTXORB_FTDI_RANGE_0175_PID 0x0175 -#define MTXORB_FTDI_RANGE_0176_PID 0x0176 -#define MTXORB_FTDI_RANGE_0177_PID 0x0177 -#define MTXORB_FTDI_RANGE_0178_PID 0x0178 -#define MTXORB_FTDI_RANGE_0179_PID 0x0179 -#define MTXORB_FTDI_RANGE_017A_PID 0x017A -#define MTXORB_FTDI_RANGE_017B_PID 0x017B -#define MTXORB_FTDI_RANGE_017C_PID 0x017C -#define MTXORB_FTDI_RANGE_017D_PID 0x017D -#define MTXORB_FTDI_RANGE_017E_PID 0x017E -#define MTXORB_FTDI_RANGE_017F_PID 0x017F -#define MTXORB_FTDI_RANGE_0180_PID 0x0180 -#define MTXORB_FTDI_RANGE_0181_PID 0x0181 -#define MTXORB_FTDI_RANGE_0182_PID 0x0182 -#define MTXORB_FTDI_RANGE_0183_PID 0x0183 -#define MTXORB_FTDI_RANGE_0184_PID 0x0184 -#define MTXORB_FTDI_RANGE_0185_PID 0x0185 -#define MTXORB_FTDI_RANGE_0186_PID 0x0186 -#define MTXORB_FTDI_RANGE_0187_PID 0x0187 -#define MTXORB_FTDI_RANGE_0188_PID 0x0188 -#define MTXORB_FTDI_RANGE_0189_PID 0x0189 -#define MTXORB_FTDI_RANGE_018A_PID 0x018A -#define MTXORB_FTDI_RANGE_018B_PID 0x018B -#define MTXORB_FTDI_RANGE_018C_PID 0x018C -#define MTXORB_FTDI_RANGE_018D_PID 0x018D -#define MTXORB_FTDI_RANGE_018E_PID 0x018E -#define MTXORB_FTDI_RANGE_018F_PID 0x018F -#define MTXORB_FTDI_RANGE_0190_PID 0x0190 -#define MTXORB_FTDI_RANGE_0191_PID 0x0191 -#define MTXORB_FTDI_RANGE_0192_PID 0x0192 -#define MTXORB_FTDI_RANGE_0193_PID 0x0193 -#define MTXORB_FTDI_RANGE_0194_PID 0x0194 -#define MTXORB_FTDI_RANGE_0195_PID 0x0195 -#define MTXORB_FTDI_RANGE_0196_PID 0x0196 -#define MTXORB_FTDI_RANGE_0197_PID 0x0197 -#define MTXORB_FTDI_RANGE_0198_PID 0x0198 -#define MTXORB_FTDI_RANGE_0199_PID 0x0199 -#define MTXORB_FTDI_RANGE_019A_PID 0x019A -#define MTXORB_FTDI_RANGE_019B_PID 0x019B -#define MTXORB_FTDI_RANGE_019C_PID 0x019C -#define MTXORB_FTDI_RANGE_019D_PID 0x019D -#define MTXORB_FTDI_RANGE_019E_PID 0x019E -#define MTXORB_FTDI_RANGE_019F_PID 0x019F -#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 -#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 -#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 -#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 -#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 -#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 -#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 -#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 -#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 -#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 -#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA -#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB -#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC -#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD -#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE -#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF -#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 -#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 -#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 -#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 -#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 -#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 -#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 -#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 -#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 -#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 -#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA -#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB -#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC -#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD -#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE -#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF -#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 -#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 -#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 -#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 -#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 -#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 -#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 -#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 -#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 -#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 -#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA -#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB -#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC -#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD -#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE -#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF -#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 -#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 -#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 -#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 -#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 -#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 -#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 -#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 -#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 -#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 -#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA -#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB -#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC -#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD -#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE -#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF -#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 -#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 -#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 -#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 -#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 -#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 -#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 -#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 -#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 -#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 -#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA -#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB -#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC -#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED -#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE -#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF -#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 -#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 -#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 -#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 -#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 -#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 -#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 -#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 -#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 -#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 -#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA -#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB -#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC -#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD -#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE -#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF - - - -/* Interbiometrics USB I/O Board */ -/* Developed for Interbiometrics by Rudolf Gugler */ -#define INTERBIOMETRICS_VID 0x1209 -#define INTERBIOMETRICS_IOBOARD_PID 0x1002 -#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 - -/* - * The following are the values for the Perle Systems - * UltraPort USB serial converters - */ -#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ - -/* - * The following are the values for the Sealevel SeaLINK+ adapters. - * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and - * removed some PIDs that don't seem to match any existing products.) - */ -#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ -#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ -#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ -#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ -#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ -#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ -#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ -#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ -#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ -#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ -#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ -#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ -#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ -#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ -#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ -#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ -#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ -#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ -#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ -#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ -#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ -#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ -#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ -#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ -#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ -#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ -#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ -#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ -#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ -#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ -#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ -#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ -#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ -#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ -#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ -#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ -#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ -#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ -#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ -#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ -#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ -#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ -#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ -#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ -#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ -#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ -#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ -#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ - -/* - * The following are the values for two KOBIL chipcard terminals. - */ -#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ -#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ -#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ - -/* - * Icom ID-1 digital transceiver - */ - -#define ICOM_ID1_VID 0x0C26 -#define ICOM_ID1_PID 0x0004 - -/* - * ASK.fr devices - */ -#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ - -/* - * FTDI USB UART chips used in construction projects from the - * Elektor Electronics magazine (http://elektor-electronics.co.uk) - */ -#define ELEKTOR_VID 0x0C7D -#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ - -/* - * DSS-20 Sync Station for Sony Ericsson P800 - */ -#define FTDI_DSS20_PID 0xFC82 - -/* - * Home Electronics (www.home-electro.com) USB gadgets - */ -#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ - -/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ -#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ - -/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ - -#define FTDI_TNC_X_PID 0xEBE0 - -/* - * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). - * All of these devices use FTDI's vendor ID (0x0403). - * - * The previously included PID for the UO 100 module was incorrect. - * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). - * - * Armin Laeuger originally sent the PID for the UM 100 module. - */ -#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */ -#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ -#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ -#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ -#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ -/* Additional ELV PIDs that default to using the FTDI D2XX drivers on - * MS Windows, rather than the FTDI Virtual Com Port drivers. - * Maybe these will be easier to use with the libftdi/libusb user-space - * drivers, or possibly the Comedi drivers in some cases. */ -#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ -#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ -#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ -#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ -#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ -#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ -#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ -#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ -#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ -#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ -#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ -#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ -#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ -#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ -#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ -#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ -#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ -#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ -#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ -#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ -#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ -#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ -#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ - -/* - * Definitions for ID TECH (www.idt-net.com) devices - */ -#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ -#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ - -/* - * Definitions for Omnidirectional Control Technology, Inc. devices - */ -#define OCT_VID 0x0B39 /* OCT vendor ID */ -/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ -/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ -/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ -#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ - -/* an infrared receiver for user access control with IR tags */ -#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ - -/* - * Definitions for Artemis astronomical USB based cameras - * Check it at http://www.artemisccd.co.uk/ - */ -#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ - -/* - * Definitions for ATIK Instruments astronomical USB based cameras - * Check it at http://www.atik-instruments.com/ - */ -#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ -#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ -#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ -#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ -#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ - -/* - * Protego product ids - */ -#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ -#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ -#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ -#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ - -/* - * Gude Analog- und Digitalsysteme GmbH - */ -#define FTDI_GUDEADS_E808_PID 0xE808 -#define FTDI_GUDEADS_E809_PID 0xE809 -#define FTDI_GUDEADS_E80A_PID 0xE80A -#define FTDI_GUDEADS_E80B_PID 0xE80B -#define FTDI_GUDEADS_E80C_PID 0xE80C -#define FTDI_GUDEADS_E80D_PID 0xE80D -#define FTDI_GUDEADS_E80E_PID 0xE80E -#define FTDI_GUDEADS_E80F_PID 0xE80F -#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ -#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ -#define FTDI_GUDEADS_E88A_PID 0xE88A -#define FTDI_GUDEADS_E88B_PID 0xE88B -#define FTDI_GUDEADS_E88C_PID 0xE88C -#define FTDI_GUDEADS_E88D_PID 0xE88D -#define FTDI_GUDEADS_E88E_PID 0xE88E -#define FTDI_GUDEADS_E88F_PID 0xE88F - -/* - * Linx Technologies product ids - */ -#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ -#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ -#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ -#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ -#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ - -/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ -/* unit for PIC16's/PIC18's */ -#define FTDI_CCSICDU20_0_PID 0xF9D0 -#define FTDI_CCSICDU40_1_PID 0xF9D1 -#define FTDI_CCSMACHX_2_PID 0xF9D2 -#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 -#define FTDI_CCSICDU64_4_PID 0xF9D4 -#define FTDI_CCSPRIME8_5_PID 0xF9D5 - -/* Inside Accesso contactless reader (http://www.insidefr.com) */ -#define INSIDE_ACCESSO 0xFAD0 - -/* - * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI - */ -#define INTREPID_VID 0x093C -#define INTREPID_VALUECAN_PID 0x0601 -#define INTREPID_NEOVI_PID 0x0701 - -/* - * Falcom Wireless Communications GmbH - */ -#define FALCOM_VID 0x0F94 /* Vendor Id */ -#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ -#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ - -/* - * SUUNTO product ids - */ -#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ - -/* - * Oceanic product ids - */ -#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ - -/* - * TTi (Thurlby Thandar Instruments) - */ -#define TTI_VID 0x103E /* Vendor Id */ -#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ - -/* - * Definitions for B&B Electronics products. - */ -#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ -#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ -#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ -#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ -#define BANDB_USOPTL4_PID 0xAC11 -#define BANDB_USPTL4_PID 0xAC12 -#define BANDB_USO9ML2DR_2_PID 0xAC16 -#define BANDB_USO9ML2DR_PID 0xAC17 -#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */ -#define BANDB_USOPTL4DR_PID 0xAC19 -#define BANDB_485USB9F_2W_PID 0xAC25 -#define BANDB_485USB9F_4W_PID 0xAC26 -#define BANDB_232USB9M_PID 0xAC27 -#define BANDB_485USBTB_2W_PID 0xAC33 -#define BANDB_485USBTB_4W_PID 0xAC34 -#define BANDB_TTL5USB9M_PID 0xAC49 -#define BANDB_TTL3USB9M_PID 0xAC50 -#define BANDB_ZZ_PROG1_USB_PID 0xBA02 - -/* - * RM Michaelides CANview USB (http://www.rmcan.com) - * CAN fieldbus interface adapter, added by port GmbH www.port.de) - * Ian Abbott changed the macro names for consistency. - */ -#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ - -/* - * EVER Eco Pro UPS (http://www.ever.com.pl/) - */ - -#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ - -/* - * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, - * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices - * and I'm not entirely sure which are used by which. - */ -#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 -#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 - -/* - * Mobility Electronics products. - */ -#define MOBILITY_VID 0x1342 -#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ - -/* - * microHAM product IDs (http://www.microham.com). - * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> - * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. - * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. - */ -#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ -#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ -#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ -#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ -#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ -#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ -#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ -#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ - -/* - * Active Robots product ids. - */ -#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ - -/* - * Xsens Technologies BV products (http://www.xsens.com). - */ -#define XSENS_CONVERTER_0_PID 0xD388 -#define XSENS_CONVERTER_1_PID 0xD389 -#define XSENS_CONVERTER_2_PID 0xD38A -#define XSENS_CONVERTER_3_PID 0xD38B -#define XSENS_CONVERTER_4_PID 0xD38C -#define XSENS_CONVERTER_5_PID 0xD38D -#define XSENS_CONVERTER_6_PID 0xD38E -#define XSENS_CONVERTER_7_PID 0xD38F - -/* - * Teratronik product ids. - * Submitted by O. Wölfelschneider. - */ -#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ -#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ - -/* - * Evolution Robotics products (http://www.evolution.com/). - * Submitted by Shawn M. Lavelle. - */ -#define EVOLUTION_VID 0xDEEE /* Vendor ID */ -#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ -#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ -#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ -#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ - -/* Pyramid Computer GmbH */ -#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ - -/* - * NDI (www.ndigital.com) product ids - */ -#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ -#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ -#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ -#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ -#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ - -/* - * Posiflex inc retail equipment (http://www.posiflex.com.tw) - */ -#define POSIFLEX_VID 0x0d3a /* Vendor ID */ -#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ - -/* - * Westrex International devices submitted by Cory Lee - */ -#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ -#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ - -/* - * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) - */ -#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ - -/* - * Eclo (http://www.eclo.pt/) product IDs. - * PID 0xEA90 submitted by Martin Grill. - */ -#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ - -/* - * Papouch products (http://www.papouch.com/) - * Submitted by Folkert van Heusden - */ - -#define PAPOUCH_VID 0x5050 /* Vendor ID */ -#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ -#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ - -/* - * ACG Identification Technologies GmbH products (http://www.acg.de/). - * Submitted by anton -at- goto10 -dot- org. */ -#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ - -/* - * Yost Engineering, Inc. products (www.yostengineering.com). - * PID 0xE050 submitted by Aaron Prose. - */ -#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ - -/* - * ThorLabs USB motor drivers - */ -#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ - -/* - * Testo products (http://www.testo.com/) - * Submitted by Colin Leroy - */ -#define TESTO_VID 0x128D -#define TESTO_USB_INTERFACE_PID 0x0001 - -/* - * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. - */ -#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ - -/* - * Tactrix OpenPort (ECU) devices. - * OpenPort 1.3M submitted by Donour Sizemore. - * OpenPort 1.3S and 1.3U submitted by Ian Abbott. - */ -#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ -#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ -#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ - -/* - * Telldus Technologies - */ -#define TELLDUS_VID 0x1781 /* Vendor ID */ -#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ - -/* - * IBS elektronik product ids - * Submitted by Thomas Schleusener - */ -#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ -#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ -#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ -#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ -#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ -#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ -#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ -#define FTDI_IBS_PROD_PID 0xff3f /* future device */ - -/* - * MaxStream devices www.maxstream.net - */ -#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ - -/* Olimex */ -#define OLIMEX_VID 0x15BA -#define OLIMEX_ARM_USB_OCD_PID 0x0003 - -/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ -/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ -#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 -#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 - -/* www.elsterelectricity.com Elster Unicom III Optical Probe */ -#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ - -/* - * The Mobility Lab (TML) - * Submitted by Pierre Castella - */ -#define TML_VID 0x1B91 /* Vendor ID */ -#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ - -/* Propox devices */ -#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 - -/* Rig Expert Ukraine devices */ -#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ - -/* Domintell products http://www.domintell.com */ -#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ -#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ - -/* Alti-2 products http://www.alti-2.com */ -#define ALTI2_VID 0x1BC9 -#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ @@ -910,86 +40,6 @@ #define INTERFACE_C 3 #define INTERFACE_D 4 -/* - * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 - * Submitted by Harald Welte <laforge@openmoko.org> - */ -#define FIC_VID 0x1457 -#define FIC_NEO1973_DEBUG_PID 0x5118 - -/* - * RATOC REX-USB60F - */ -#define RATOC_VENDOR_ID 0x0584 -#define RATOC_PRODUCT_ID_USB60F 0xb020 - -/* - * DIEBOLD BCS SE923 - */ -#define DIEBOLD_BCS_SE923_PID 0xfb99 - -/* - * Atmel STK541 - */ -#define ATMEL_VID 0x03eb /* Vendor ID */ -#define STK541_PID 0x2109 /* Zigbee Controller */ - -/* - * Dresden Elektronic Sensor Terminal Board - */ -#define DE_VID 0x1cf1 /* Vendor ID */ -#define STB_PID 0x0001 /* Sensor Terminal Board */ -#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ - -/* - * Blackfin gnICE JTAG - * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice - */ -#define ADI_VID 0x0456 -#define ADI_GNICE_PID 0xF000 -#define ADI_GNICEPLUS_PID 0xF001 - -/* - * JETI SPECTROMETER SPECBOS 1201 - * http://www.jeti.com/products/sys/scb/scb1201.php - */ -#define JETI_VID 0x0c6c -#define JETI_SPC1201_PID 0x04b2 - -/* - * Marvell SheevaPlug - */ -#define MARVELL_VID 0x9e88 -#define MARVELL_SHEEVAPLUG_PID 0x9e8f - -#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ - -/* - * GN Otometrics (http://www.otometrics.com) - * Submitted by Ville Sundberg. - */ -#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ -#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ - -/* - * Bayer Ascensia Contour blood glucose meter USB-converter cable. - * http://winglucofacts.com/cables/ - */ -#define BAYER_VID 0x1A79 -#define BAYER_CONTOUR_CABLE_PID 0x6001 - -/* - * Marvell OpenRD Base, Client - * http://www.open-rd.org - * OpenRD Base, Client use VID 0x0403 - */ -#define MARVELL_OPENRD_PID 0x9e90 - -/* - * Hameg HO820 and HO870 interface (using VID 0x0403) - */ -#define HAMEG_HO820_PID 0xed74 -#define HAMEG_HO870_PID 0xed71 /* * BmRequestType: 1100 0000b @@ -1504,4 +554,3 @@ typedef enum { * B2..7 Length of message - (not including Byte 0) * */ - diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h new file mode 100644 index 00000000000..da92b4952ff --- /dev/null +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -0,0 +1,986 @@ +/* + * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters. + * Please keep numerically sorted within individual areas, thanks! + * + * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais + * from Rudolf Gugler + * + */ + + +/**********************************/ +/***** devices using FTDI VID *****/ +/**********************************/ + + +#define FTDI_VID 0x0403 /* Vendor Id */ + + +/*** "original" FTDI device PIDs ***/ + +#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ +#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ +#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ +#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ +#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ +#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ + + +/*** third-party PIDs (using FTDI_VID) ***/ + +/* + * Marvell OpenRD Base, Client + * http://www.open-rd.org + * OpenRD Base, Client use VID 0x0403 + */ +#define MARVELL_OPENRD_PID 0x9e90 + +/* www.candapter.com Ewert Energy Systems CANdapter device */ +#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ + +/* OOCDlink by Joern Kaipf <joernk@web.de> + * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ +#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ + +/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ +/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ +#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 +#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 + +#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ + +/* OpenDCC (www.opendcc.de) product id */ +#define FTDI_OPENDCC_PID 0xBFD8 +#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 +#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA +#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB + +/* + * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) + */ +#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ + +/* DMX4ALL DMX Interfaces */ +#define FTDI_DMX4ALL 0xC850 + +/* + * ASK.fr devices + */ +#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ + +/* www.starting-point-systems.com µChameleon device */ +#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ + +/* + * Tactrix OpenPort (ECU) devices. + * OpenPort 1.3M submitted by Donour Sizemore. + * OpenPort 1.3S and 1.3U submitted by Ian Abbott. + */ +#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ +#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ +#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ + +/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ +/* the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ +#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ +#define FTDI_SCS_DEVICE_2_PID 0xD012 +#define FTDI_SCS_DEVICE_3_PID 0xD013 +#define FTDI_SCS_DEVICE_4_PID 0xD014 +#define FTDI_SCS_DEVICE_5_PID 0xD015 +#define FTDI_SCS_DEVICE_6_PID 0xD016 +#define FTDI_SCS_DEVICE_7_PID 0xD017 + +/* iPlus device */ +#define FTDI_IPLUS_PID 0xD070 /* Product Id */ +#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ + +/* + * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + */ +#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ + +/* Propox devices */ +#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 + +/* + * Xsens Technologies BV products (http://www.xsens.com). + */ +#define XSENS_CONVERTER_0_PID 0xD388 +#define XSENS_CONVERTER_1_PID 0xD389 +#define XSENS_CONVERTER_2_PID 0xD38A +#define XSENS_CONVERTER_3_PID 0xD38B +#define XSENS_CONVERTER_4_PID 0xD38C +#define XSENS_CONVERTER_5_PID 0xD38D +#define XSENS_CONVERTER_6_PID 0xD38E +#define XSENS_CONVERTER_7_PID 0xD38F + +/* + * NDI (www.ndigital.com) product ids + */ +#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ +#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ +#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ +#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ +#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ + +/* + * Westrex International devices submitted by Cory Lee + */ +#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ +#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ + +/* + * ACG Identification Technologies GmbH products (http://www.acg.de/). + * Submitted by anton -at- goto10 -dot- org. + */ +#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ + +/* + * Definitions for Artemis astronomical USB based cameras + * Check it at http://www.artemisccd.co.uk/ + */ +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ + +/* + * Definitions for ATIK Instruments astronomical USB based cameras + * Check it at http://www.atik-instruments.com/ + */ +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ +#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ +#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ +#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ + +/* + * Yost Engineering, Inc. products (www.yostengineering.com). + * PID 0xE050 submitted by Aaron Prose. + */ +#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ + +/* + * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). + * All of these devices use FTDI's vendor ID (0x0403). + * + * The previously included PID for the UO 100 module was incorrect. + * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). + * + * Armin Laeuger originally sent the PID for the UM 100 module. + */ +#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ +#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ +#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ +#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ +#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ +#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ +#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ +#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ +#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ +#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ +#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ +#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ +#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ +#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ +#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ +#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ +#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ +#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ +#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ +#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ +#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ +#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ +/* Additional ELV PIDs that default to using the FTDI D2XX drivers on + * MS Windows, rather than the FTDI Virtual Com Port drivers. + * Maybe these will be easier to use with the libftdi/libusb user-space + * drivers, or possibly the Comedi drivers in some cases. */ +#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ +#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ +#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ +#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ +#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ + +/* + * EVER Eco Pro UPS (http://www.ever.com.pl/) + */ + +#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ + +/* + * Active Robots product ids. + */ +#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ + +/* Pyramid Computer GmbH */ +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ + +/* www.elsterelectricity.com Elster Unicom III Optical Probe */ +#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ + +/* + * Gude Analog- und Digitalsysteme GmbH + */ +#define FTDI_GUDEADS_E808_PID 0xE808 +#define FTDI_GUDEADS_E809_PID 0xE809 +#define FTDI_GUDEADS_E80A_PID 0xE80A +#define FTDI_GUDEADS_E80B_PID 0xE80B +#define FTDI_GUDEADS_E80C_PID 0xE80C +#define FTDI_GUDEADS_E80D_PID 0xE80D +#define FTDI_GUDEADS_E80E_PID 0xE80E +#define FTDI_GUDEADS_E80F_PID 0xE80F +#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ +#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ +#define FTDI_GUDEADS_E88A_PID 0xE88A +#define FTDI_GUDEADS_E88B_PID 0xE88B +#define FTDI_GUDEADS_E88C_PID 0xE88C +#define FTDI_GUDEADS_E88D_PID 0xE88D +#define FTDI_GUDEADS_E88E_PID 0xE88E +#define FTDI_GUDEADS_E88F_PID 0xE88F + +/* + * Eclo (http://www.eclo.pt/) product IDs. + * PID 0xEA90 submitted by Martin Grill. + */ +#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ + +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ +#define FTDI_TNC_X_PID 0xEBE0 + +/* + * Teratronik product ids. + * Submitted by O. Wölfelschneider. + */ +#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ +#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ + +/* Rig Expert Ukraine devices */ +#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ + +/* + * Hameg HO820 and HO870 interface (using VID 0x0403) + */ +#define HAMEG_HO820_PID 0xed74 +#define HAMEG_HO870_PID 0xed71 + +/* + * MaxStream devices www.maxstream.net + */ +#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ + +/* + * microHAM product IDs (http://www.microham.com). + * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> + * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. + * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. + */ +#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ +#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ +#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ +#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ +#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ +#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ +#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ +#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ + +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ + +/* + * The following are the values for the Perle Systems + * UltraPort USB serial converters + */ +#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ + +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 + +/* an infrared receiver for user access control with IR tags */ +#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ + +/* ACT Solutions HomePro ZWave interface + (http://www.act-solutions.com/HomePro.htm) */ +#define FTDI_ACTZWAVE_PID 0xF2D0 + +/* + * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, + * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices + * and I'm not entirely sure which are used by which. + */ +#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 +#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 + +/* + * Linx Technologies product ids + */ +#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ +#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ +#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ +#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ +#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ + +/* + * Oceanic product ids + */ +#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ + +/* + * SUUNTO product ids + */ +#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ + +/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ +/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ +#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ + +/* CCS Inc. ICDU/ICDU40 product ID - + * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */ +#define FTDI_CCSICDU20_0_PID 0xF9D0 +#define FTDI_CCSICDU40_1_PID 0xF9D1 +#define FTDI_CCSMACHX_2_PID 0xF9D2 +#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 +#define FTDI_CCSICDU64_4_PID 0xF9D4 +#define FTDI_CCSPRIME8_5_PID 0xF9D5 + +/* + * The following are the values for the Matrix Orbital LCD displays, + * which are the FT232BM ( similar to the 8U232AM ) + */ +#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ + +/* + * Home Electronics (www.home-electro.com) USB gadgets + */ +#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ + +/* Inside Accesso contactless reader (http://www.insidefr.com) */ +#define INSIDE_ACCESSO 0xFAD0 + +/* + * ThorLabs USB motor drivers + */ +#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ + +/* + * Protego product ids + */ +#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ +#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ +#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ +#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ + +/* + * DSS-20 Sync Station for Sony Ericsson P800 + */ +#define FTDI_DSS20_PID 0xFC82 + +/* www.irtrans.de device */ +#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ + +/* + * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID) + * CAN fieldbus interface adapter, added by port GmbH www.port.de) + * Ian Abbott changed the macro names for consistency. + */ +#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ +/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ +#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ + +#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 (FTDI_VID) */ + +#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ + +/* + * PCDJ use ftdi based dj-controllers. The following PID is + * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp + * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen) + */ +#define FTDI_PCDJ_DAC2_PID 0xFA88 + +#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG (FTDI_VID) */ + +/* + * DIEBOLD BCS SE923 (FTDI_VID) + */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* www.crystalfontz.com devices + * - thanx for providing free devices for evaluation ! + * they use the ftdi chipset for the USB interface + * and the vendor id is the same + */ +#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ +#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ +#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ +#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ +#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ +#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ +#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ +#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ + +/* + * Video Networks Limited / Homechoice in the UK use an ftdi-based device + * for their 1Mb broadband internet service. The following PID is exhibited + * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID) + */ +#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ + +/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */ +#define FTDI_AMC232_PID 0xFF00 /* Product Id */ + +/* + * IBS elektronik product ids (FTDI_VID) + * Submitted by Thomas Schleusener + */ +#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ +#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ +#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ +#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ +#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ +#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ +#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ +#define FTDI_IBS_PROD_PID 0xff3f /* future device */ +/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */ +#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ + + + +/********************************/ +/** third-party VID/PID combos **/ +/********************************/ + + + +/* + * Atmel STK541 + */ +#define ATMEL_VID 0x03eb /* Vendor ID */ +#define STK541_PID 0x2109 /* Zigbee Controller */ + +/* + * Blackfin gnICE JTAG + * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice + */ +#define ADI_VID 0x0456 +#define ADI_GNICE_PID 0xF000 +#define ADI_GNICEPLUS_PID 0xF001 + +/* + * RATOC REX-USB60F + */ +#define RATOC_VENDOR_ID 0x0584 +#define RATOC_PRODUCT_ID_USB60F 0xb020 + +/* + * Definitions for B&B Electronics products. + */ +#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ +#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ +#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ +#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ +#define BANDB_USOPTL4_PID 0xAC11 +#define BANDB_USPTL4_PID 0xAC12 +#define BANDB_USO9ML2DR_2_PID 0xAC16 +#define BANDB_USO9ML2DR_PID 0xAC17 +#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */ +#define BANDB_USOPTL4DR_PID 0xAC19 +#define BANDB_485USB9F_2W_PID 0xAC25 +#define BANDB_485USB9F_4W_PID 0xAC26 +#define BANDB_232USB9M_PID 0xAC27 +#define BANDB_485USBTB_2W_PID 0xAC33 +#define BANDB_485USBTB_4W_PID 0xAC34 +#define BANDB_TTL5USB9M_PID 0xAC49 +#define BANDB_TTL3USB9M_PID 0xAC50 +#define BANDB_ZZ_PROG1_USB_PID 0xBA02 + +/* + * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI + */ +#define INTREPID_VID 0x093C +#define INTREPID_VALUECAN_PID 0x0601 +#define INTREPID_NEOVI_PID 0x0701 + +/* + * Definitions for ID TECH (www.idt-net.com) devices + */ +#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ +#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ + +/* + * Definitions for Omnidirectional Control Technology, Inc. devices + */ +#define OCT_VID 0x0B39 /* OCT vendor ID */ +/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ +/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ +/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ +#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ + +/* + * Icom ID-1 digital transceiver + */ + +#define ICOM_ID1_VID 0x0C26 +#define ICOM_ID1_PID 0x0004 + +/* + * GN Otometrics (http://www.otometrics.com) + * Submitted by Ville Sundberg. + */ +#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ +#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ + +/* + * The following are the values for the Sealevel SeaLINK+ adapters. + * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and + * removed some PIDs that don't seem to match any existing products.) + */ +#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ +#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ +#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ +#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ +#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ +#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ +#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ +#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ +#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ +#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ +#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ +#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ +#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ +#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ +#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ +#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ +#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ +#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ +#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ +#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ +#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ +#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ +#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ +#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ +#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ +#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ +#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ +#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ +#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ +#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ +#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ +#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ +#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ +#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ +#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ +#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ +#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ +#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ +#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ +#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ +#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ +#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ +#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ +#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ +#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ +#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ +#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ +#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ + +/* + * JETI SPECTROMETER SPECBOS 1201 + * http://www.jeti.com/products/sys/scb/scb1201.php + */ +#define JETI_VID 0x0c6c +#define JETI_SPC1201_PID 0x04b2 + +/* + * FTDI USB UART chips used in construction projects from the + * Elektor Electronics magazine (http://elektor-electronics.co.uk) + */ +#define ELEKTOR_VID 0x0C7D +#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ + +/* + * Posiflex inc retail equipment (http://www.posiflex.com.tw) + */ +#define POSIFLEX_VID 0x0d3a /* Vendor ID */ +#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ + +/* + * The following are the values for two KOBIL chipcard terminals. + */ +#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ +#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ +#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ + +#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ +#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ + +/* + * Falcom Wireless Communications GmbH + */ +#define FALCOM_VID 0x0F94 /* Vendor Id */ +#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ +#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ + +/* Larsen and Brusgaard AltiTrack/USBtrack */ +#define LARSENBRUSGAARD_VID 0x0FD8 +#define LB_ALTITRACK_PID 0x0001 + +/* + * TTi (Thurlby Thandar Instruments) + */ +#define TTI_VID 0x103E /* Vendor Id */ +#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ + +/* Interbiometrics USB I/O Board */ +/* Developed for Interbiometrics by Rudolf Gugler */ +#define INTERBIOMETRICS_VID 0x1209 +#define INTERBIOMETRICS_IOBOARD_PID 0x1002 +#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 + +/* + * Testo products (http://www.testo.com/) + * Submitted by Colin Leroy + */ +#define TESTO_VID 0x128D +#define TESTO_USB_INTERFACE_PID 0x0001 + +/* + * Mobility Electronics products. + */ +#define MOBILITY_VID 0x1342 +#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ + +/* + * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 + * Submitted by Harald Welte <laforge@openmoko.org> + */ +#define FIC_VID 0x1457 +#define FIC_NEO1973_DEBUG_PID 0x5118 + +/* Olimex */ +#define OLIMEX_VID 0x15BA +#define OLIMEX_ARM_USB_OCD_PID 0x0003 + +/* + * Telldus Technologies + */ +#define TELLDUS_VID 0x1781 /* Vendor ID */ +#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ + +/* + * Bayer Ascensia Contour blood glucose meter USB-converter cable. + * http://winglucofacts.com/cables/ + */ +#define BAYER_VID 0x1A79 +#define BAYER_CONTOUR_CABLE_PID 0x6001 + +/* + * The following are the values for the Matrix Orbital FTDI Range + * Anything in this range will use an FT232RL. + */ +#define MTXORB_VID 0x1B3D +#define MTXORB_FTDI_RANGE_0100_PID 0x0100 +#define MTXORB_FTDI_RANGE_0101_PID 0x0101 +#define MTXORB_FTDI_RANGE_0102_PID 0x0102 +#define MTXORB_FTDI_RANGE_0103_PID 0x0103 +#define MTXORB_FTDI_RANGE_0104_PID 0x0104 +#define MTXORB_FTDI_RANGE_0105_PID 0x0105 +#define MTXORB_FTDI_RANGE_0106_PID 0x0106 +#define MTXORB_FTDI_RANGE_0107_PID 0x0107 +#define MTXORB_FTDI_RANGE_0108_PID 0x0108 +#define MTXORB_FTDI_RANGE_0109_PID 0x0109 +#define MTXORB_FTDI_RANGE_010A_PID 0x010A +#define MTXORB_FTDI_RANGE_010B_PID 0x010B +#define MTXORB_FTDI_RANGE_010C_PID 0x010C +#define MTXORB_FTDI_RANGE_010D_PID 0x010D +#define MTXORB_FTDI_RANGE_010E_PID 0x010E +#define MTXORB_FTDI_RANGE_010F_PID 0x010F +#define MTXORB_FTDI_RANGE_0110_PID 0x0110 +#define MTXORB_FTDI_RANGE_0111_PID 0x0111 +#define MTXORB_FTDI_RANGE_0112_PID 0x0112 +#define MTXORB_FTDI_RANGE_0113_PID 0x0113 +#define MTXORB_FTDI_RANGE_0114_PID 0x0114 +#define MTXORB_FTDI_RANGE_0115_PID 0x0115 +#define MTXORB_FTDI_RANGE_0116_PID 0x0116 +#define MTXORB_FTDI_RANGE_0117_PID 0x0117 +#define MTXORB_FTDI_RANGE_0118_PID 0x0118 +#define MTXORB_FTDI_RANGE_0119_PID 0x0119 +#define MTXORB_FTDI_RANGE_011A_PID 0x011A +#define MTXORB_FTDI_RANGE_011B_PID 0x011B +#define MTXORB_FTDI_RANGE_011C_PID 0x011C +#define MTXORB_FTDI_RANGE_011D_PID 0x011D +#define MTXORB_FTDI_RANGE_011E_PID 0x011E +#define MTXORB_FTDI_RANGE_011F_PID 0x011F +#define MTXORB_FTDI_RANGE_0120_PID 0x0120 +#define MTXORB_FTDI_RANGE_0121_PID 0x0121 +#define MTXORB_FTDI_RANGE_0122_PID 0x0122 +#define MTXORB_FTDI_RANGE_0123_PID 0x0123 +#define MTXORB_FTDI_RANGE_0124_PID 0x0124 +#define MTXORB_FTDI_RANGE_0125_PID 0x0125 +#define MTXORB_FTDI_RANGE_0126_PID 0x0126 +#define MTXORB_FTDI_RANGE_0127_PID 0x0127 +#define MTXORB_FTDI_RANGE_0128_PID 0x0128 +#define MTXORB_FTDI_RANGE_0129_PID 0x0129 +#define MTXORB_FTDI_RANGE_012A_PID 0x012A +#define MTXORB_FTDI_RANGE_012B_PID 0x012B +#define MTXORB_FTDI_RANGE_012C_PID 0x012C +#define MTXORB_FTDI_RANGE_012D_PID 0x012D +#define MTXORB_FTDI_RANGE_012E_PID 0x012E +#define MTXORB_FTDI_RANGE_012F_PID 0x012F +#define MTXORB_FTDI_RANGE_0130_PID 0x0130 +#define MTXORB_FTDI_RANGE_0131_PID 0x0131 +#define MTXORB_FTDI_RANGE_0132_PID 0x0132 +#define MTXORB_FTDI_RANGE_0133_PID 0x0133 +#define MTXORB_FTDI_RANGE_0134_PID 0x0134 +#define MTXORB_FTDI_RANGE_0135_PID 0x0135 +#define MTXORB_FTDI_RANGE_0136_PID 0x0136 +#define MTXORB_FTDI_RANGE_0137_PID 0x0137 +#define MTXORB_FTDI_RANGE_0138_PID 0x0138 +#define MTXORB_FTDI_RANGE_0139_PID 0x0139 +#define MTXORB_FTDI_RANGE_013A_PID 0x013A +#define MTXORB_FTDI_RANGE_013B_PID 0x013B +#define MTXORB_FTDI_RANGE_013C_PID 0x013C +#define MTXORB_FTDI_RANGE_013D_PID 0x013D +#define MTXORB_FTDI_RANGE_013E_PID 0x013E +#define MTXORB_FTDI_RANGE_013F_PID 0x013F +#define MTXORB_FTDI_RANGE_0140_PID 0x0140 +#define MTXORB_FTDI_RANGE_0141_PID 0x0141 +#define MTXORB_FTDI_RANGE_0142_PID 0x0142 +#define MTXORB_FTDI_RANGE_0143_PID 0x0143 +#define MTXORB_FTDI_RANGE_0144_PID 0x0144 +#define MTXORB_FTDI_RANGE_0145_PID 0x0145 +#define MTXORB_FTDI_RANGE_0146_PID 0x0146 +#define MTXORB_FTDI_RANGE_0147_PID 0x0147 +#define MTXORB_FTDI_RANGE_0148_PID 0x0148 +#define MTXORB_FTDI_RANGE_0149_PID 0x0149 +#define MTXORB_FTDI_RANGE_014A_PID 0x014A +#define MTXORB_FTDI_RANGE_014B_PID 0x014B +#define MTXORB_FTDI_RANGE_014C_PID 0x014C +#define MTXORB_FTDI_RANGE_014D_PID 0x014D +#define MTXORB_FTDI_RANGE_014E_PID 0x014E +#define MTXORB_FTDI_RANGE_014F_PID 0x014F +#define MTXORB_FTDI_RANGE_0150_PID 0x0150 +#define MTXORB_FTDI_RANGE_0151_PID 0x0151 +#define MTXORB_FTDI_RANGE_0152_PID 0x0152 +#define MTXORB_FTDI_RANGE_0153_PID 0x0153 +#define MTXORB_FTDI_RANGE_0154_PID 0x0154 +#define MTXORB_FTDI_RANGE_0155_PID 0x0155 +#define MTXORB_FTDI_RANGE_0156_PID 0x0156 +#define MTXORB_FTDI_RANGE_0157_PID 0x0157 +#define MTXORB_FTDI_RANGE_0158_PID 0x0158 +#define MTXORB_FTDI_RANGE_0159_PID 0x0159 +#define MTXORB_FTDI_RANGE_015A_PID 0x015A +#define MTXORB_FTDI_RANGE_015B_PID 0x015B +#define MTXORB_FTDI_RANGE_015C_PID 0x015C +#define MTXORB_FTDI_RANGE_015D_PID 0x015D +#define MTXORB_FTDI_RANGE_015E_PID 0x015E +#define MTXORB_FTDI_RANGE_015F_PID 0x015F +#define MTXORB_FTDI_RANGE_0160_PID 0x0160 +#define MTXORB_FTDI_RANGE_0161_PID 0x0161 +#define MTXORB_FTDI_RANGE_0162_PID 0x0162 +#define MTXORB_FTDI_RANGE_0163_PID 0x0163 +#define MTXORB_FTDI_RANGE_0164_PID 0x0164 +#define MTXORB_FTDI_RANGE_0165_PID 0x0165 +#define MTXORB_FTDI_RANGE_0166_PID 0x0166 +#define MTXORB_FTDI_RANGE_0167_PID 0x0167 +#define MTXORB_FTDI_RANGE_0168_PID 0x0168 +#define MTXORB_FTDI_RANGE_0169_PID 0x0169 +#define MTXORB_FTDI_RANGE_016A_PID 0x016A +#define MTXORB_FTDI_RANGE_016B_PID 0x016B +#define MTXORB_FTDI_RANGE_016C_PID 0x016C +#define MTXORB_FTDI_RANGE_016D_PID 0x016D +#define MTXORB_FTDI_RANGE_016E_PID 0x016E +#define MTXORB_FTDI_RANGE_016F_PID 0x016F +#define MTXORB_FTDI_RANGE_0170_PID 0x0170 +#define MTXORB_FTDI_RANGE_0171_PID 0x0171 +#define MTXORB_FTDI_RANGE_0172_PID 0x0172 +#define MTXORB_FTDI_RANGE_0173_PID 0x0173 +#define MTXORB_FTDI_RANGE_0174_PID 0x0174 +#define MTXORB_FTDI_RANGE_0175_PID 0x0175 +#define MTXORB_FTDI_RANGE_0176_PID 0x0176 +#define MTXORB_FTDI_RANGE_0177_PID 0x0177 +#define MTXORB_FTDI_RANGE_0178_PID 0x0178 +#define MTXORB_FTDI_RANGE_0179_PID 0x0179 +#define MTXORB_FTDI_RANGE_017A_PID 0x017A +#define MTXORB_FTDI_RANGE_017B_PID 0x017B +#define MTXORB_FTDI_RANGE_017C_PID 0x017C +#define MTXORB_FTDI_RANGE_017D_PID 0x017D +#define MTXORB_FTDI_RANGE_017E_PID 0x017E +#define MTXORB_FTDI_RANGE_017F_PID 0x017F +#define MTXORB_FTDI_RANGE_0180_PID 0x0180 +#define MTXORB_FTDI_RANGE_0181_PID 0x0181 +#define MTXORB_FTDI_RANGE_0182_PID 0x0182 +#define MTXORB_FTDI_RANGE_0183_PID 0x0183 +#define MTXORB_FTDI_RANGE_0184_PID 0x0184 +#define MTXORB_FTDI_RANGE_0185_PID 0x0185 +#define MTXORB_FTDI_RANGE_0186_PID 0x0186 +#define MTXORB_FTDI_RANGE_0187_PID 0x0187 +#define MTXORB_FTDI_RANGE_0188_PID 0x0188 +#define MTXORB_FTDI_RANGE_0189_PID 0x0189 +#define MTXORB_FTDI_RANGE_018A_PID 0x018A +#define MTXORB_FTDI_RANGE_018B_PID 0x018B +#define MTXORB_FTDI_RANGE_018C_PID 0x018C +#define MTXORB_FTDI_RANGE_018D_PID 0x018D +#define MTXORB_FTDI_RANGE_018E_PID 0x018E +#define MTXORB_FTDI_RANGE_018F_PID 0x018F +#define MTXORB_FTDI_RANGE_0190_PID 0x0190 +#define MTXORB_FTDI_RANGE_0191_PID 0x0191 +#define MTXORB_FTDI_RANGE_0192_PID 0x0192 +#define MTXORB_FTDI_RANGE_0193_PID 0x0193 +#define MTXORB_FTDI_RANGE_0194_PID 0x0194 +#define MTXORB_FTDI_RANGE_0195_PID 0x0195 +#define MTXORB_FTDI_RANGE_0196_PID 0x0196 +#define MTXORB_FTDI_RANGE_0197_PID 0x0197 +#define MTXORB_FTDI_RANGE_0198_PID 0x0198 +#define MTXORB_FTDI_RANGE_0199_PID 0x0199 +#define MTXORB_FTDI_RANGE_019A_PID 0x019A +#define MTXORB_FTDI_RANGE_019B_PID 0x019B +#define MTXORB_FTDI_RANGE_019C_PID 0x019C +#define MTXORB_FTDI_RANGE_019D_PID 0x019D +#define MTXORB_FTDI_RANGE_019E_PID 0x019E +#define MTXORB_FTDI_RANGE_019F_PID 0x019F +#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 +#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 +#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 +#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 +#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 +#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 +#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 +#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 +#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 +#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 +#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA +#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB +#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC +#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD +#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE +#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF +#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 +#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 +#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 +#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 +#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 +#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 +#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 +#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 +#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 +#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 +#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA +#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB +#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC +#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD +#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE +#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF +#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 +#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 +#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 +#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 +#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 +#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 +#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 +#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 +#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 +#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 +#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA +#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB +#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC +#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD +#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE +#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF +#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 +#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 +#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 +#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 +#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 +#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 +#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 +#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 +#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 +#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 +#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA +#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB +#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC +#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD +#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE +#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF +#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 +#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 +#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 +#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 +#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 +#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 +#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 +#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 +#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 +#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 +#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA +#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB +#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC +#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED +#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE +#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF +#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 +#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 +#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 +#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 +#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 +#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 +#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 +#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 +#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 +#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 +#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA +#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB +#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC +#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD +#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE +#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF + + + +/* + * The Mobility Lab (TML) + * Submitted by Pierre Castella + */ +#define TML_VID 0x1B91 /* Vendor ID */ +#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ + +/* Alti-2 products http://www.alti-2.com */ +#define ALTI2_VID 0x1BC9 +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ + +/* + * Dresden Elektronic Sensor Terminal Board + */ +#define DE_VID 0x1cf1 /* Vendor ID */ +#define STB_PID 0x0001 /* Sensor Terminal Board */ +#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ + +/* + * Papouch products (http://www.papouch.com/) + * Submitted by Folkert van Heusden + */ + +#define PAPOUCH_VID 0x5050 /* Vendor ID */ +#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ + +/* + * Marvell SheevaPlug + */ +#define MARVELL_VID 0x9e88 +#define MARVELL_SHEEVAPLUG_PID 0x9e8f + +/* + * Evolution Robotics products (http://www.evolution.com/). + * Submitted by Shawn M. Lavelle. + */ +#define EVOLUTION_VID 0xDEEE /* Vendor ID */ +#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ +#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ +#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index b0f1183755c..f1ea3a33b6e 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -276,7 +276,7 @@ static int usb_serial_generic_write_start(struct usb_serial_port *port) if (port->write_urb_busy) start_io = false; else { - start_io = (kfifo_len(port->write_fifo) != 0); + start_io = (kfifo_len(&port->write_fifo) != 0); port->write_urb_busy = start_io; } spin_unlock_irqrestore(&port->lock, flags); @@ -285,7 +285,7 @@ static int usb_serial_generic_write_start(struct usb_serial_port *port) return 0; data = port->write_urb->transfer_buffer; - count = kfifo_out_locked(port->write_fifo, data, port->bulk_out_size, &port->lock); + count = kfifo_out_locked(&port->write_fifo, data, port->bulk_out_size, &port->lock); usb_serial_debug_data(debug, &port->dev, __func__, count, data); /* set up our urb */ @@ -345,7 +345,7 @@ int usb_serial_generic_write(struct tty_struct *tty, return usb_serial_multi_urb_write(tty, port, buf, count); - count = kfifo_in_locked(port->write_fifo, buf, count, &port->lock); + count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock); result = usb_serial_generic_write_start(port); if (result >= 0) @@ -370,7 +370,7 @@ int usb_serial_generic_write_room(struct tty_struct *tty) (serial->type->max_in_flight_urbs - port->urbs_in_flight); } else if (serial->num_bulk_out) - room = port->write_fifo->size - kfifo_len(port->write_fifo); + room = kfifo_avail(&port->write_fifo); spin_unlock_irqrestore(&port->lock, flags); dbg("%s - returns %d", __func__, room); @@ -391,7 +391,7 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) chars = port->tx_bytes_flight; spin_unlock_irqrestore(&port->lock, flags); } else if (serial->num_bulk_out) - chars = kfifo_len(port->write_fifo); + chars = kfifo_len(&port->write_fifo); dbg("%s - returns %d", __func__, chars); return chars; @@ -507,7 +507,7 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) if (status) { dbg("%s - nonzero multi-urb write bulk status " "received: %d", __func__, status); - kfifo_reset(port->write_fifo); + kfifo_reset_out(&port->write_fifo); } else usb_serial_generic_write_start(port); } diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 485fa9c5b10..2cfe2451ed9 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -127,8 +127,9 @@ #define BANDB_DEVICE_ID_US9ML2_4 0xAC30 #define BANDB_DEVICE_ID_USPTL4_2 0xAC31 #define BANDB_DEVICE_ID_USPTL4_4 0xAC32 -#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 -#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 +#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 +#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 +#define BANDB_DEVICE_ID_USOPTL2_4 0xAC24 /* This driver also supports * ATEN UC2324 device using Moschip MCS7840 @@ -191,6 +192,7 @@ static struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, {} /* terminating entry */ @@ -207,6 +209,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, {} /* terminating entry */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9a2b903492e..6e94a6711f0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -340,6 +340,10 @@ static int option_resume(struct usb_serial *serial); #define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 +/* Haier products */ +#define HAIER_VENDOR_ID 0x201e +#define HAIER_PRODUCT_CE100 0x2009 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -641,6 +645,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) }, + { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 636a4f23445..33c85f7084f 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -595,8 +595,7 @@ static void port_release(struct device *dev) usb_free_urb(port->write_urb); usb_free_urb(port->interrupt_in_urb); usb_free_urb(port->interrupt_out_urb); - if (!IS_ERR(port->write_fifo) && port->write_fifo) - kfifo_free(port->write_fifo); + kfifo_free(&port->write_fifo); kfree(port->bulk_in_buffer); kfree(port->bulk_out_buffer); kfree(port->interrupt_in_buffer); @@ -939,7 +938,7 @@ int usb_serial_probe(struct usb_interface *interface, dev_err(&interface->dev, "No free urbs available\n"); goto probe_error; } - if (kfifo_alloc(port->write_fifo, PAGE_SIZE, GFP_KERNEL)) + if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL)) goto probe_error; buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); port->bulk_out_size = buffer_size; diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c index da7c01b39be..3a561df2e8a 100644 --- a/drivers/video/cyber2000fb.c +++ b/drivers/video/cyber2000fb.c @@ -1573,15 +1573,15 @@ cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (err) return err; - err = pci_request_regions(dev, name); - if (err) - return err; - err = -ENOMEM; cfb = cyberpro_alloc_fb_info(id->driver_data, name); if (!cfb) goto failed_release; + err = pci_request_regions(dev, cfb->fb.fix.id); + if (err) + goto failed_regions; + cfb->dev = dev; cfb->region = pci_ioremap_bar(dev, 0); if (!cfb->region) @@ -1633,10 +1633,10 @@ cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) failed: iounmap(cfb->region); failed_ioremap: + pci_release_regions(dev); +failed_regions: cyberpro_free_fb_info(cfb); failed_release: - pci_release_regions(dev); - return err; } diff --git a/drivers/watchdog/adx_wdt.c b/drivers/watchdog/adx_wdt.c index 9c6594473d3..9d7d155364f 100644 --- a/drivers/watchdog/adx_wdt.c +++ b/drivers/watchdog/adx_wdt.c @@ -242,14 +242,14 @@ static int __devinit adx_wdt_probe(struct platform_device *pdev) } res = devm_request_mem_region(&pdev->dev, res->start, - res->end - res->start + 1, res->name); + resource_size(res), res->name); if (!res) { dev_err(&pdev->dev, "cannot request I/O memory region\n"); return -ENXIO; } wdt->base = devm_ioremap_nocache(&pdev->dev, res->start, - res->end - res->start + 1); + resource_size(res)); if (!wdt->base) { dev_err(&pdev->dev, "cannot remap I/O memory region\n"); return -ENXIO; diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index e8ae638e580..037847923dc 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -326,7 +326,7 @@ static int __init at32_wdt_probe(struct platform_device *pdev) return -ENOMEM; } - wdt->regs = ioremap(regs->start, regs->end - regs->start + 1); + wdt->regs = ioremap(regs->start, resource_size(regs)); if (!wdt->regs) { ret = -ENOMEM; dev_dbg(&pdev->dev, "could not map I/O memory\n"); diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c index 9d7520fa9e9..887136de185 100644 --- a/drivers/watchdog/davinci_wdt.c +++ b/drivers/watchdog/davinci_wdt.c @@ -221,7 +221,7 @@ static int __devinit davinci_wdt_probe(struct platform_device *pdev) return -ENOENT; } - size = res->end - res->start + 1; + size = resource_size(res); wdt_mem = request_mem_region(res->start, size, pdev->name); if (wdt_mem == NULL) { diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index e44fbb31bc6..c8a3bec2683 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -30,6 +30,7 @@ * document number 316972-004, 316973-012: 82801I (ICH9) * document number 319973-002, 319974-002: 82801J (ICH10) * document number 322169-001, 322170-001: 5 Series, 3400 Series (PCH) + * document number 320066-003, 320257-008: EP80597 (IICH) */ /* @@ -100,6 +101,7 @@ enum iTCO_chipsets { TCO_PCH, /* PCH Desktop Full Featured */ TCO_PCHM, /* PCH Mobile Full Featured */ TCO_PCHMSFF, /* PCH Mobile SFF Full Featured */ + TCO_EP80579, /* EP80579 */ }; static struct { @@ -143,6 +145,7 @@ static struct { {"PCH Desktop Full Featured", 2}, {"PCH Mobile Full Featured", 2}, {"PCH Mobile SFF Full Featured", 2}, + {"EP80579", 2}, {NULL, 0} }; @@ -214,6 +217,7 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(0x3b00, TCO_PCH)}, { ITCO_PCI_DEVICE(0x3b01, TCO_PCHM)}, { ITCO_PCI_DEVICE(0x3b0d, TCO_PCHMSFF)}, + { ITCO_PCI_DEVICE(0x5031, TCO_EP80579)}, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c index 83fa34b214b..a2dc07c2ed4 100644 --- a/drivers/watchdog/mpcore_wdt.c +++ b/drivers/watchdog/mpcore_wdt.c @@ -350,7 +350,7 @@ static int __devinit mpcore_wdt_probe(struct platform_device *dev) ret = -ENXIO; goto err_free; } - wdt->base = ioremap(res->start, res->end - res->start + 1); + wdt->base = ioremap(res->start, resource_size(res)); if (!wdt->base) { ret = -ENOMEM; goto err_free; diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c index acf589dc057..a51dbe4c43d 100644 --- a/drivers/watchdog/mv64x60_wdt.c +++ b/drivers/watchdog/mv64x60_wdt.c @@ -275,7 +275,7 @@ static int __devinit mv64x60_wdt_probe(struct platform_device *dev) if (!r) return -ENODEV; - mv64x60_wdt_regs = ioremap(r->start, r->end - r->start + 1); + mv64x60_wdt_regs = ioremap(r->start, resource_size(r)); if (mv64x60_wdt_regs == NULL) return -ENOMEM; diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 429ea99eaee..c6aaf284574 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -277,8 +277,7 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev) goto err_busy; } - mem = request_mem_region(res->start, res->end - res->start + 1, - pdev->name); + mem = request_mem_region(res->start, resource_size(res), pdev->name); if (!mem) { ret = -EBUSY; goto err_busy; @@ -306,7 +305,7 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev) goto err_clk; } - wdev->base = ioremap(res->start, res->end - res->start + 1); + wdev->base = ioremap(res->start, resource_size(res)); if (!wdev->base) { ret = -ENOMEM; goto err_ioremap; @@ -358,7 +357,7 @@ err_clk: kfree(wdev); err_kzalloc: - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); err_busy: err_get_resource: @@ -383,7 +382,7 @@ static int __devexit omap_wdt_remove(struct platform_device *pdev) return -ENOENT; misc_deregister(&(wdev->omap_wdt_miscdev)); - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); platform_set_drvdata(pdev, NULL); clk_put(wdev->ick); diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 4d227b15200..430a5848a9a 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -264,7 +264,7 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev) return -ENOENT; } - size = res->end - res->start + 1; + size = resource_size(res); wdt_mem = request_mem_region(res->start, size, pdev->name); if (wdt_mem == NULL) { diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 85b93e15d01..8760a26ab2a 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -421,7 +421,7 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) return -ENOENT; } - size = (res->end - res->start) + 1; + size = resource_size(res); wdt_mem = request_mem_region(res->start, size, pdev->name); if (wdt_mem == NULL) { dev_err(dev, "failed to get memory region\n"); diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c index 6adab77fbbb..d635566e930 100644 --- a/drivers/watchdog/txx9wdt.c +++ b/drivers/watchdog/txx9wdt.c @@ -214,12 +214,10 @@ static int __init txx9wdt_probe(struct platform_device *dev) res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res) goto exit_busy; - if (!devm_request_mem_region(&dev->dev, - res->start, res->end - res->start + 1, + if (!devm_request_mem_region(&dev->dev, res->start, resource_size(res), "txx9wdt")) goto exit_busy; - txx9wdt_reg = devm_ioremap(&dev->dev, - res->start, res->end - res->start + 1); + txx9wdt_reg = devm_ioremap(&dev->dev, res->start, resource_size(res)); if (!txx9wdt_reg) goto exit_busy; diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 094ea65afc8..7b2600b380d 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -5,7 +5,9 @@ have duplicated data). Fix oops in cifs_lookup. Workaround problem mounting to OS/400 Netserve. Fix oops in cifs_get_tcp_session. Disable use of server inode numbers when server only partially supports them (e.g. for one server querying inode numbers on -FindFirst fails but QPathInfo queries works). +FindFirst fails but QPathInfo queries works). Fix oops with dfs in +cifs_put_smb_ses. Fix mmap to work on directio mounts (needed +for OpenOffice when on forcedirectio mount e.g.) Version 1.60 ------------- diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 29f1da761bb..8c6a0362717 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -758,7 +758,7 @@ const struct file_operations cifs_file_ops = { }; const struct file_operations cifs_file_direct_ops = { - /* no mmap, no aio, no readv - + /* no aio, no readv - BB reevaluate whether they can be done with directio, no cache */ .read = cifs_user_read, .write = cifs_user_write, @@ -767,6 +767,7 @@ const struct file_operations cifs_file_direct_ops = { .lock = cifs_lock, .fsync = cifs_fsync, .flush = cifs_flush, + .mmap = cifs_file_mmap, .splice_read = generic_file_splice_read, #ifdef CONFIG_CIFS_POSIX .unlocked_ioctl = cifs_ioctl, diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 63ea83ff687..3bbcaa716b3 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2287,12 +2287,12 @@ int cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, char *mount_data_global, const char *devname) { - int rc = 0; + int rc; int xid; struct smb_vol *volume_info; - struct cifsSesInfo *pSesInfo = NULL; - struct cifsTconInfo *tcon = NULL; - struct TCP_Server_Info *srvTcp = NULL; + struct cifsSesInfo *pSesInfo; + struct cifsTconInfo *tcon; + struct TCP_Server_Info *srvTcp; char *full_path; char *mount_data = mount_data_global; #ifdef CONFIG_CIFS_DFS_UPCALL @@ -2301,6 +2301,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, int referral_walks_count = 0; try_mount_again: #endif + rc = 0; + tcon = NULL; + pSesInfo = NULL; + srvTcp = NULL; full_path = NULL; xid = GetXid(); @@ -2597,6 +2601,7 @@ remote_path_check: cleanup_volume_info(&volume_info); referral_walks_count++; + FreeXid(xid); goto try_mount_again; } #else /* No DFS support, return error on mount */ diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index ad14227f509..455e6e6e5cb 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -970,7 +970,7 @@ static int ext3_get_block(struct inode *inode, sector_t iblock, if (max_blocks > DIO_MAX_BLOCKS) max_blocks = DIO_MAX_BLOCKS; handle = ext3_journal_start(inode, DIO_CREDITS + - 2 * EXT3_QUOTA_TRANS_BLOCKS(inode->i_sb)); + EXT3_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb)); if (IS_ERR(handle)) { ret = PTR_ERR(handle); goto out; @@ -3146,8 +3146,8 @@ int ext3_setattr(struct dentry *dentry, struct iattr *attr) /* (user+group)*(old+new) structure, inode write (sb, * inode block, ? - but truncate inode update has it) */ - handle = ext3_journal_start(inode, 2*(EXT3_QUOTA_INIT_BLOCKS(inode->i_sb)+ - EXT3_QUOTA_DEL_BLOCKS(inode->i_sb))+3); + handle = ext3_journal_start(inode, EXT3_MAXQUOTAS_INIT_BLOCKS(inode->i_sb)+ + EXT3_MAXQUOTAS_DEL_BLOCKS(inode->i_sb)+3); if (IS_ERR(handle)) { error = PTR_ERR(handle); goto err_out; @@ -3239,7 +3239,7 @@ static int ext3_writepage_trans_blocks(struct inode *inode) #ifdef CONFIG_QUOTA /* We know that structure was already allocated during vfs_dq_init so * we will be updating only the data blocks + inodes */ - ret += 2*EXT3_QUOTA_TRANS_BLOCKS(inode->i_sb); + ret += EXT3_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb); #endif return ret; diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index aad6400c9b7..7b0e44f7d66 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -1699,7 +1699,7 @@ static int ext3_create (struct inode * dir, struct dentry * dentry, int mode, retry: handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - 2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb)); + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); if (IS_ERR(handle)) return PTR_ERR(handle); @@ -1733,7 +1733,7 @@ static int ext3_mknod (struct inode * dir, struct dentry *dentry, retry: handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - 2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb)); + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); if (IS_ERR(handle)) return PTR_ERR(handle); @@ -1769,7 +1769,7 @@ static int ext3_mkdir(struct inode * dir, struct dentry * dentry, int mode) retry: handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - 2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb)); + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); if (IS_ERR(handle)) return PTR_ERR(handle); @@ -1920,7 +1920,7 @@ int ext3_orphan_add(handle_t *handle, struct inode *inode) struct ext3_iloc iloc; int err = 0, rc; - lock_super(sb); + mutex_lock(&EXT3_SB(sb)->s_orphan_lock); if (!list_empty(&EXT3_I(inode)->i_orphan)) goto out_unlock; @@ -1929,9 +1929,13 @@ int ext3_orphan_add(handle_t *handle, struct inode *inode) /* @@@ FIXME: Observation from aviro: * I think I can trigger J_ASSERT in ext3_orphan_add(). We block - * here (on lock_super()), so race with ext3_link() which might bump + * here (on s_orphan_lock), so race with ext3_link() which might bump * ->i_nlink. For, say it, character device. Not a regular file, * not a directory, not a symlink and ->i_nlink > 0. + * + * tytso, 4/25/2009: I'm not sure how that could happen; + * shouldn't the fs core protect us from these sort of + * unlink()/link() races? */ J_ASSERT ((S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) || inode->i_nlink == 0); @@ -1968,7 +1972,7 @@ int ext3_orphan_add(handle_t *handle, struct inode *inode) jbd_debug(4, "orphan inode %lu will point to %d\n", inode->i_ino, NEXT_ORPHAN(inode)); out_unlock: - unlock_super(sb); + mutex_unlock(&EXT3_SB(sb)->s_orphan_lock); ext3_std_error(inode->i_sb, err); return err; } @@ -1986,11 +1990,9 @@ int ext3_orphan_del(handle_t *handle, struct inode *inode) struct ext3_iloc iloc; int err = 0; - lock_super(inode->i_sb); - if (list_empty(&ei->i_orphan)) { - unlock_super(inode->i_sb); - return 0; - } + mutex_lock(&EXT3_SB(inode->i_sb)->s_orphan_lock); + if (list_empty(&ei->i_orphan)) + goto out; ino_next = NEXT_ORPHAN(inode); prev = ei->i_orphan.prev; @@ -2040,7 +2042,7 @@ int ext3_orphan_del(handle_t *handle, struct inode *inode) out_err: ext3_std_error(inode->i_sb, err); out: - unlock_super(inode->i_sb); + mutex_unlock(&EXT3_SB(inode->i_sb)->s_orphan_lock); return err; out_brelse: @@ -2175,7 +2177,7 @@ static int ext3_symlink (struct inode * dir, retry: handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + EXT3_INDEX_EXTRA_TRANS_BLOCKS + 5 + - 2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb)); + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); if (IS_ERR(handle)) return PTR_ERR(handle); diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c index 5f83b617917..54351ac7cef 100644 --- a/fs/ext3/resize.c +++ b/fs/ext3/resize.c @@ -209,7 +209,7 @@ static int setup_new_group_blocks(struct super_block *sb, if (IS_ERR(handle)) return PTR_ERR(handle); - lock_super(sb); + mutex_lock(&sbi->s_resize_lock); if (input->group != sbi->s_groups_count) { err = -EBUSY; goto exit_journal; @@ -324,7 +324,7 @@ exit_bh: brelse(bh); exit_journal: - unlock_super(sb); + mutex_unlock(&sbi->s_resize_lock); if ((err2 = ext3_journal_stop(handle)) && !err) err = err2; @@ -662,11 +662,12 @@ exit_free: * important part is that the new block and inode counts are in the backup * superblocks, and the location of the new group metadata in the GDT backups. * - * We do not need lock_super() for this, because these blocks are not - * otherwise touched by the filesystem code when it is mounted. We don't - * need to worry about last changing from sbi->s_groups_count, because the - * worst that can happen is that we do not copy the full number of backups - * at this time. The resize which changed s_groups_count will backup again. + * We do not need take the s_resize_lock for this, because these + * blocks are not otherwise touched by the filesystem code when it is + * mounted. We don't need to worry about last changing from + * sbi->s_groups_count, because the worst that can happen is that we + * do not copy the full number of backups at this time. The resize + * which changed s_groups_count will backup again. */ static void update_backups(struct super_block *sb, int blk_off, char *data, int size) @@ -825,7 +826,7 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input) goto exit_put; } - lock_super(sb); + mutex_lock(&sbi->s_resize_lock); if (input->group != sbi->s_groups_count) { ext3_warning(sb, __func__, "multiple resizers run on filesystem!"); @@ -856,7 +857,7 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input) /* * OK, now we've set up the new group. Time to make it active. * - * Current kernels don't lock all allocations via lock_super(), + * We do not lock all allocations via s_resize_lock * so we have to be safe wrt. concurrent accesses the group * data. So we need to be careful to set all of the relevant * group descriptor data etc. *before* we enable the group. @@ -900,12 +901,12 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input) * * The precise rules we use are: * - * * Writers of s_groups_count *must* hold lock_super + * * Writers of s_groups_count *must* hold s_resize_lock * AND * * Writers must perform a smp_wmb() after updating all dependent * data and before modifying the groups count * - * * Readers must hold lock_super() over the access + * * Readers must hold s_resize_lock over the access * OR * * Readers must perform an smp_rmb() after reading the groups count * and before reading any dependent data. @@ -936,7 +937,7 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input) ext3_journal_dirty_metadata(handle, sbi->s_sbh); exit_journal: - unlock_super(sb); + mutex_unlock(&sbi->s_resize_lock); if ((err2 = ext3_journal_stop(handle)) && !err) err = err2; if (!err) { @@ -973,7 +974,7 @@ int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es, /* We don't need to worry about locking wrt other resizers just * yet: we're going to revalidate es->s_blocks_count after - * taking lock_super() below. */ + * taking the s_resize_lock below. */ o_blocks_count = le32_to_cpu(es->s_blocks_count); o_groups_count = EXT3_SB(sb)->s_groups_count; @@ -1045,11 +1046,11 @@ int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es, goto exit_put; } - lock_super(sb); + mutex_lock(&EXT3_SB(sb)->s_resize_lock); if (o_blocks_count != le32_to_cpu(es->s_blocks_count)) { ext3_warning(sb, __func__, "multiple resizers run on filesystem!"); - unlock_super(sb); + mutex_unlock(&EXT3_SB(sb)->s_resize_lock); ext3_journal_stop(handle); err = -EBUSY; goto exit_put; @@ -1059,13 +1060,13 @@ int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es, EXT3_SB(sb)->s_sbh))) { ext3_warning(sb, __func__, "error %d on journal write access", err); - unlock_super(sb); + mutex_unlock(&EXT3_SB(sb)->s_resize_lock); ext3_journal_stop(handle); goto exit_put; } es->s_blocks_count = cpu_to_le32(o_blocks_count + add); ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh); - unlock_super(sb); + mutex_unlock(&EXT3_SB(sb)->s_resize_lock); ext3_debug("freeing blocks %lu through "E3FSBLK"\n", o_blocks_count, o_blocks_count + add); ext3_free_blocks_sb(handle, sb, o_blocks_count, add, &freed_blocks); diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 7ad1e8c30bd..afa2b569da1 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -1928,6 +1928,8 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent) sb->dq_op = &ext3_quota_operations; #endif INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */ + mutex_init(&sbi->s_orphan_lock); + mutex_init(&sbi->s_resize_lock); sb->s_root = NULL; @@ -2014,14 +2016,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent) } ext3_setup_super (sb, es, sb->s_flags & MS_RDONLY); - /* - * akpm: core read_super() calls in here with the superblock locked. - * That deadlocks, because orphan cleanup needs to lock the superblock - * in numerous places. Here we just pop the lock - it's relatively - * harmless, because we are now ready to accept write_super() requests, - * and aviro says that's the only reason for hanging onto the - * superblock lock. - */ + EXT3_SB(sb)->s_mount_state |= EXT3_ORPHAN_FS; ext3_orphan_cleanup(sb, es); EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS; @@ -2403,13 +2398,11 @@ static void ext3_mark_recovery_complete(struct super_block * sb, if (journal_flush(journal) < 0) goto out; - lock_super(sb); if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) && sb->s_flags & MS_RDONLY) { EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); ext3_commit_super(sb, es, 1); } - unlock_super(sb); out: journal_unlock_updates(journal); @@ -2601,13 +2594,7 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data) (sbi->s_mount_state & EXT3_VALID_FS)) es->s_state = cpu_to_le16(sbi->s_mount_state); - /* - * We have to unlock super so that we can wait for - * transactions. - */ - unlock_super(sb); ext3_mark_recovery_complete(sb, es); - lock_super(sb); } else { __le32 ret; if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb, diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig index 9acf7e80813..9ed1bb1f319 100644 --- a/fs/ext4/Kconfig +++ b/fs/ext4/Kconfig @@ -28,6 +28,7 @@ config EXT4_FS config EXT4_USE_FOR_EXT23 bool "Use ext4 for ext2/ext3 file systems" + depends on EXT4_FS depends on EXT3_FS=n || EXT2_FS=n default y help diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c index 4df8621ec31..a60ab9aad57 100644 --- a/fs/ext4/block_validity.c +++ b/fs/ext4/block_validity.c @@ -16,7 +16,6 @@ #include <linux/module.h> #include <linux/swap.h> #include <linux/pagemap.h> -#include <linux/version.h> #include <linux/blkdev.h> #include <linux/mutex.h> #include "ext4.h" diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index ab31e65d46d..56f9271ee8c 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -704,6 +704,10 @@ struct ext4_inode_info { __u16 i_extra_isize; spinlock_t i_block_reservation_lock; +#ifdef CONFIG_QUOTA + /* quota space reservation, managed internally by quota code */ + qsize_t i_reserved_quota; +#endif /* completed async DIOs that might need unwritten extents handling */ struct list_head i_aio_dio_complete_list; @@ -1435,7 +1439,7 @@ extern int ext4_chunk_trans_blocks(struct inode *, int nrblocks); extern int ext4_block_truncate_page(handle_t *handle, struct address_space *mapping, loff_t from); extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf); -extern qsize_t ext4_get_reserved_space(struct inode *inode); +extern qsize_t *ext4_get_reserved_space(struct inode *inode); extern int flush_aio_dio_completed_IO(struct inode *inode); /* ioctl.c */ extern long ext4_ioctl(struct file *, unsigned int, unsigned long); diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 3a7928f825e..91ae46098ea 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3023,6 +3023,14 @@ out: return err; } +static void unmap_underlying_metadata_blocks(struct block_device *bdev, + sector_t block, int count) +{ + int i; + for (i = 0; i < count; i++) + unmap_underlying_metadata(bdev, block + i); +} + static int ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode, ext4_lblk_t iblock, unsigned int max_blocks, @@ -3098,6 +3106,18 @@ out: } else allocated = ret; set_buffer_new(bh_result); + /* + * if we allocated more blocks than requested + * we need to make sure we unmap the extra block + * allocated. The actual needed block will get + * unmapped later when we find the buffer_head marked + * new. + */ + if (allocated > max_blocks) { + unmap_underlying_metadata_blocks(inode->i_sb->s_bdev, + newblock + max_blocks, + allocated - max_blocks); + } map_out: set_buffer_mapped(bh_result); out1: @@ -3190,7 +3210,13 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode, * this situation is possible, though, _during_ tree modification; * this is why assert can't be put in ext4_ext_find_extent() */ - BUG_ON(path[depth].p_ext == NULL && depth != 0); + if (path[depth].p_ext == NULL && depth != 0) { + ext4_error(inode->i_sb, __func__, "bad extent address " + "inode: %lu, iblock: %d, depth: %d", + inode->i_ino, iblock, depth); + err = -EIO; + goto out2; + } eh = path[depth].p_hdr; ex = path[depth].p_ext; diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c index 0b22497d92e..98bd140aad0 100644 --- a/fs/ext4/fsync.c +++ b/fs/ext4/fsync.c @@ -88,9 +88,21 @@ int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync) return ext4_force_commit(inode->i_sb); commit_tid = datasync ? ei->i_datasync_tid : ei->i_sync_tid; - if (jbd2_log_start_commit(journal, commit_tid)) + if (jbd2_log_start_commit(journal, commit_tid)) { + /* + * When the journal is on a different device than the + * fs data disk, we need to issue the barrier in + * writeback mode. (In ordered mode, the jbd2 layer + * will take care of issuing the barrier. In + * data=journal, all of the data blocks are written to + * the journal device.) + */ + if (ext4_should_writeback_data(inode) && + (journal->j_fs_dev != journal->j_dev) && + (journal->j_flags & JBD2_BARRIER)) + blkdev_issue_flush(inode->i_sb->s_bdev, NULL); jbd2_log_wait_commit(journal, commit_tid); - else if (journal->j_flags & JBD2_BARRIER) + } else if (journal->j_flags & JBD2_BARRIER) blkdev_issue_flush(inode->i_sb->s_bdev, NULL); return ret; } diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 5352db1a308..84eeb8f515a 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1003,17 +1003,12 @@ out: return err; } -qsize_t ext4_get_reserved_space(struct inode *inode) +#ifdef CONFIG_QUOTA +qsize_t *ext4_get_reserved_space(struct inode *inode) { - unsigned long long total; - - spin_lock(&EXT4_I(inode)->i_block_reservation_lock); - total = EXT4_I(inode)->i_reserved_data_blocks + - EXT4_I(inode)->i_reserved_meta_blocks; - spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); - - return (total << inode->i_blkbits); + return &EXT4_I(inode)->i_reserved_quota; } +#endif /* * Calculate the number of metadata blocks need to reserve * to allocate @blocks for non extent file based file @@ -1048,38 +1043,47 @@ static int ext4_calc_metadata_amount(struct inode *inode, int blocks) return ext4_indirect_calc_metadata_amount(inode, blocks); } +/* + * Called with i_data_sem down, which is important since we can call + * ext4_discard_preallocations() from here. + */ static void ext4_da_update_reserve_space(struct inode *inode, int used) { struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); - int total, mdb, mdb_free; - - spin_lock(&EXT4_I(inode)->i_block_reservation_lock); - /* recalculate the number of metablocks still need to be reserved */ - total = EXT4_I(inode)->i_reserved_data_blocks - used; - mdb = ext4_calc_metadata_amount(inode, total); - - /* figure out how many metablocks to release */ - BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); - mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; - - if (mdb_free) { - /* Account for allocated meta_blocks */ - mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks; - - /* update fs dirty blocks counter */ + struct ext4_inode_info *ei = EXT4_I(inode); + int mdb_free = 0; + + spin_lock(&ei->i_block_reservation_lock); + if (unlikely(used > ei->i_reserved_data_blocks)) { + ext4_msg(inode->i_sb, KERN_NOTICE, "%s: ino %lu, used %d " + "with only %d reserved data blocks\n", + __func__, inode->i_ino, used, + ei->i_reserved_data_blocks); + WARN_ON(1); + used = ei->i_reserved_data_blocks; + } + + /* Update per-inode reservations */ + ei->i_reserved_data_blocks -= used; + used += ei->i_allocated_meta_blocks; + ei->i_reserved_meta_blocks -= ei->i_allocated_meta_blocks; + ei->i_allocated_meta_blocks = 0; + percpu_counter_sub(&sbi->s_dirtyblocks_counter, used); + + if (ei->i_reserved_data_blocks == 0) { + /* + * We can release all of the reserved metadata blocks + * only when we have written all of the delayed + * allocation blocks. + */ + mdb_free = ei->i_allocated_meta_blocks; percpu_counter_sub(&sbi->s_dirtyblocks_counter, mdb_free); - EXT4_I(inode)->i_allocated_meta_blocks = 0; - EXT4_I(inode)->i_reserved_meta_blocks = mdb; + ei->i_allocated_meta_blocks = 0; } - - /* update per-inode reservations */ - BUG_ON(used > EXT4_I(inode)->i_reserved_data_blocks); - EXT4_I(inode)->i_reserved_data_blocks -= used; spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); - /* - * free those over-booking quota for metadata blocks - */ + /* Update quota subsystem */ + vfs_dq_claim_block(inode, used); if (mdb_free) vfs_dq_release_reservation_block(inode, mdb_free); @@ -1088,7 +1092,8 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used) * there aren't any writers on the inode, we can discard the * inode's preallocations. */ - if (!total && (atomic_read(&inode->i_writecount) == 0)) + if ((ei->i_reserved_data_blocks == 0) && + (atomic_read(&inode->i_writecount) == 0)) ext4_discard_preallocations(inode); } @@ -1801,7 +1806,8 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks) { int retries = 0; struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); - unsigned long md_needed, mdblocks, total = 0; + struct ext4_inode_info *ei = EXT4_I(inode); + unsigned long md_needed, md_reserved, total = 0; /* * recalculate the amount of metadata blocks to reserve @@ -1809,13 +1815,11 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks) * worse case is one extent per block */ repeat: - spin_lock(&EXT4_I(inode)->i_block_reservation_lock); - total = EXT4_I(inode)->i_reserved_data_blocks + nrblocks; - mdblocks = ext4_calc_metadata_amount(inode, total); - BUG_ON(mdblocks < EXT4_I(inode)->i_reserved_meta_blocks); - - md_needed = mdblocks - EXT4_I(inode)->i_reserved_meta_blocks; + spin_lock(&ei->i_block_reservation_lock); + md_reserved = ei->i_reserved_meta_blocks; + md_needed = ext4_calc_metadata_amount(inode, nrblocks); total = md_needed + nrblocks; + spin_unlock(&ei->i_block_reservation_lock); /* * Make quota reservation here to prevent quota overflow @@ -1823,72 +1827,78 @@ repeat: * time. */ if (vfs_dq_reserve_block(inode, total)) { - spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); + /* + * We tend to badly over-estimate the amount of + * metadata blocks which are needed, so if we have + * reserved any metadata blocks, try to force out the + * inode and see if we have any better luck. + */ + if (md_reserved && retries++ <= 3) + goto retry; return -EDQUOT; } if (ext4_claim_free_blocks(sbi, total)) { - spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); vfs_dq_release_reservation_block(inode, total); if (ext4_should_retry_alloc(inode->i_sb, &retries)) { + retry: + if (md_reserved) + write_inode_now(inode, (retries == 3)); yield(); goto repeat; } return -ENOSPC; } - EXT4_I(inode)->i_reserved_data_blocks += nrblocks; - EXT4_I(inode)->i_reserved_meta_blocks = mdblocks; + spin_lock(&ei->i_block_reservation_lock); + ei->i_reserved_data_blocks += nrblocks; + ei->i_reserved_meta_blocks += md_needed; + spin_unlock(&ei->i_block_reservation_lock); - spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); return 0; /* success */ } static void ext4_da_release_space(struct inode *inode, int to_free) { struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); - int total, mdb, mdb_free, release; + struct ext4_inode_info *ei = EXT4_I(inode); if (!to_free) return; /* Nothing to release, exit */ spin_lock(&EXT4_I(inode)->i_block_reservation_lock); - if (!EXT4_I(inode)->i_reserved_data_blocks) { + if (unlikely(to_free > ei->i_reserved_data_blocks)) { /* - * if there is no reserved blocks, but we try to free some - * then the counter is messed up somewhere. - * but since this function is called from invalidate - * page, it's harmless to return without any action + * if there aren't enough reserved blocks, then the + * counter is messed up somewhere. Since this + * function is called from invalidate page, it's + * harmless to return without any action. */ - printk(KERN_INFO "ext4 delalloc try to release %d reserved " - "blocks for inode %lu, but there is no reserved " - "data blocks\n", to_free, inode->i_ino); - spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); - return; + ext4_msg(inode->i_sb, KERN_NOTICE, "ext4_da_release_space: " + "ino %lu, to_free %d with only %d reserved " + "data blocks\n", inode->i_ino, to_free, + ei->i_reserved_data_blocks); + WARN_ON(1); + to_free = ei->i_reserved_data_blocks; } + ei->i_reserved_data_blocks -= to_free; - /* recalculate the number of metablocks still need to be reserved */ - total = EXT4_I(inode)->i_reserved_data_blocks - to_free; - mdb = ext4_calc_metadata_amount(inode, total); - - /* figure out how many metablocks to release */ - BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); - mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; - - release = to_free + mdb_free; - - /* update fs dirty blocks counter for truncate case */ - percpu_counter_sub(&sbi->s_dirtyblocks_counter, release); + if (ei->i_reserved_data_blocks == 0) { + /* + * We can release all of the reserved metadata blocks + * only when we have written all of the delayed + * allocation blocks. + */ + to_free += ei->i_allocated_meta_blocks; + ei->i_allocated_meta_blocks = 0; + } - /* update per-inode reservations */ - BUG_ON(to_free > EXT4_I(inode)->i_reserved_data_blocks); - EXT4_I(inode)->i_reserved_data_blocks -= to_free; + /* update fs dirty blocks counter */ + percpu_counter_sub(&sbi->s_dirtyblocks_counter, to_free); - BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); - EXT4_I(inode)->i_reserved_meta_blocks = mdb; spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); - vfs_dq_release_reservation_block(inode, release); + vfs_dq_release_reservation_block(inode, to_free); } static void ext4_da_page_release_reservation(struct page *page, @@ -2968,8 +2978,7 @@ retry: out_writepages: if (!no_nrwrite_index_update) wbc->no_nrwrite_index_update = 0; - if (wbc->nr_to_write > nr_to_writebump) - wbc->nr_to_write -= nr_to_writebump; + wbc->nr_to_write -= nr_to_writebump; wbc->range_start = range_start; trace_ext4_da_writepages_result(inode, wbc, ret, pages_written); return ret; @@ -2994,11 +3003,18 @@ static int ext4_nonda_switch(struct super_block *sb) if (2 * free_blocks < 3 * dirty_blocks || free_blocks < (dirty_blocks + EXT4_FREEBLOCKS_WATERMARK)) { /* - * free block count is less that 150% of dirty blocks - * or free blocks is less that watermark + * free block count is less than 150% of dirty blocks + * or free blocks is less than watermark */ return 1; } + /* + * Even if we don't switch but are nearing capacity, + * start pushing delalloc when 1/2 of free blocks are dirty. + */ + if (free_blocks < 2 * dirty_blocks) + writeback_inodes_sb_if_idle(sb); + return 0; } @@ -4794,6 +4810,9 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino) ((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32; inode->i_size = ext4_isize(raw_inode); ei->i_disksize = inode->i_size; +#ifdef CONFIG_QUOTA + ei->i_reserved_quota = 0; +#endif inode->i_generation = le32_to_cpu(raw_inode->i_generation); ei->i_block_group = iloc.block_group; ei->i_last_alloc_group = ~0; diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index b1fd3daadc9..d34afad3e13 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2755,12 +2755,6 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac, if (!(ac->ac_flags & EXT4_MB_DELALLOC_RESERVED)) /* release all the reserved blocks if non delalloc */ percpu_counter_sub(&sbi->s_dirtyblocks_counter, reserv_blks); - else { - percpu_counter_sub(&sbi->s_dirtyblocks_counter, - ac->ac_b_ex.fe_len); - /* convert reserved quota blocks to real quota blocks */ - vfs_dq_claim_block(ac->ac_inode, ac->ac_b_ex.fe_len); - } if (sbi->s_log_groups_per_flex) { ext4_group_t flex_group = ext4_flex_group(sbi, diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h index 0ca811061bc..436521cae45 100644 --- a/fs/ext4/mballoc.h +++ b/fs/ext4/mballoc.h @@ -17,7 +17,6 @@ #include <linux/proc_fs.h> #include <linux/pagemap.h> #include <linux/seq_file.h> -#include <linux/version.h> #include <linux/blkdev.h> #include <linux/mutex.h> #include "ext4_jbd2.h" diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 827bde1f259..7cccb35c0f4 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -704,6 +704,9 @@ static struct inode *ext4_alloc_inode(struct super_block *sb) ei->i_allocated_meta_blocks = 0; ei->i_delalloc_reserved_flag = 0; spin_lock_init(&(ei->i_block_reservation_lock)); +#ifdef CONFIG_QUOTA + ei->i_reserved_quota = 0; +#endif INIT_LIST_HEAD(&ei->i_aio_dio_complete_list); ei->cur_aio_dio = NULL; ei->i_sync_tid = 0; @@ -1014,7 +1017,9 @@ static const struct dquot_operations ext4_quota_operations = { .reserve_space = dquot_reserve_space, .claim_space = dquot_claim_space, .release_rsv = dquot_release_reserved_space, +#ifdef CONFIG_QUOTA .get_reserved_space = ext4_get_reserved_space, +#endif .alloc_inode = dquot_alloc_inode, .free_space = dquot_free_space, .free_inode = dquot_free_inode, @@ -2169,9 +2174,9 @@ static ssize_t lifetime_write_kbytes_show(struct ext4_attr *a, struct super_block *sb = sbi->s_buddy_cache->i_sb; return snprintf(buf, PAGE_SIZE, "%llu\n", - sbi->s_kbytes_written + + (unsigned long long)(sbi->s_kbytes_written + ((part_stat_read(sb->s_bdev->bd_part, sectors[1]) - - EXT4_SB(sb)->s_sectors_written_start) >> 1)); + EXT4_SB(sb)->s_sectors_written_start) >> 1))); } static ssize_t inode_readahead_blks_store(struct ext4_attr *a, @@ -4000,6 +4005,7 @@ static inline void unregister_as_ext2(void) { unregister_filesystem(&ext2_fs_type); } +MODULE_ALIAS("ext2"); #else static inline void register_as_ext2(void) { } static inline void unregister_as_ext2(void) { } @@ -4026,6 +4032,7 @@ static inline void unregister_as_ext3(void) { unregister_filesystem(&ext3_fs_type); } +MODULE_ALIAS("ext3"); #else static inline void register_as_ext3(void) { } static inline void unregister_as_ext3(void) { } diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 83218bebbc7..f3a2f7ed45a 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1332,6 +1332,8 @@ retry: goto cleanup; kfree(b_entry_name); kfree(buffer); + b_entry_name = NULL; + buffer = NULL; brelse(is->iloc.bh); kfree(is); kfree(bs); diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 49bc1b8e8f1..1a7c42c64ff 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -242,6 +242,7 @@ static void bdi_sync_writeback(struct backing_dev_info *bdi, /** * bdi_start_writeback - start writeback * @bdi: the backing device to write from + * @sb: write inodes from this super_block * @nr_pages: the number of pages to write * * Description: @@ -1187,6 +1188,23 @@ void writeback_inodes_sb(struct super_block *sb) EXPORT_SYMBOL(writeback_inodes_sb); /** + * writeback_inodes_sb_if_idle - start writeback if none underway + * @sb: the superblock + * + * Invoke writeback_inodes_sb if no writeback is currently underway. + * Returns 1 if writeback was started, 0 if not. + */ +int writeback_inodes_sb_if_idle(struct super_block *sb) +{ + if (!writeback_in_progress(sb->s_bdi)) { + writeback_inodes_sb(sb); + return 1; + } else + return 0; +} +EXPORT_SYMBOL(writeback_inodes_sb_if_idle); + +/** * sync_inodes_sb - sync sb inode pages * @sb: the superblock * diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 4160afad6d0..bd224eec9b0 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -1913,7 +1913,7 @@ static void __init jbd_create_debugfs_entry(void) { jbd_debugfs_dir = debugfs_create_dir("jbd", NULL); if (jbd_debugfs_dir) - jbd_debug = debugfs_create_u8("jbd-debug", S_IRUGO, + jbd_debug = debugfs_create_u8("jbd-debug", S_IRUGO | S_IWUSR, jbd_debugfs_dir, &journal_enable_debug); } diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index ca0f5eb62b2..88684937095 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -22,6 +22,7 @@ #include <linux/jbd2.h> #include <linux/errno.h> #include <linux/slab.h> +#include <linux/blkdev.h> #include <trace/events/jbd2.h> /* @@ -515,6 +516,20 @@ int jbd2_cleanup_journal_tail(journal_t *journal) journal->j_tail_sequence = first_tid; journal->j_tail = blocknr; spin_unlock(&journal->j_state_lock); + + /* + * If there is an external journal, we need to make sure that + * any data blocks that were recently written out --- perhaps + * by jbd2_log_do_checkpoint() --- are flushed out before we + * drop the transactions from the external journal. It's + * unlikely this will be necessary, especially with a + * appropriately sized journal, but we need this to guarantee + * correctness. Fortunately jbd2_cleanup_journal_tail() + * doesn't get called all that often. + */ + if ((journal->j_fs_dev != journal->j_dev) && + (journal->j_flags & JBD2_BARRIER)) + blkdev_issue_flush(journal->j_fs_dev, NULL); if (!(journal->j_flags & JBD2_ABORT)) jbd2_journal_update_superblock(journal, 1); return 0; diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 6a10238d2c6..1bc74b6f26d 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -259,6 +259,7 @@ static int journal_submit_data_buffers(journal_t *journal, ret = err; spin_lock(&journal->j_list_lock); J_ASSERT(jinode->i_transaction == commit_transaction); + commit_transaction->t_flushed_data_blocks = 1; jinode->i_flags &= ~JI_COMMIT_RUNNING; wake_up_bit(&jinode->i_flags, __JI_COMMIT_RUNNING); } @@ -708,8 +709,17 @@ start_journal_io: } } - /* Done it all: now write the commit record asynchronously. */ + /* + * If the journal is not located on the file system device, + * then we must flush the file system device before we issue + * the commit record + */ + if (commit_transaction->t_flushed_data_blocks && + (journal->j_fs_dev != journal->j_dev) && + (journal->j_flags & JBD2_BARRIER)) + blkdev_issue_flush(journal->j_fs_dev, NULL); + /* Done it all: now write the commit record asynchronously. */ if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) { err = journal_submit_commit_record(journal, commit_transaction, @@ -720,13 +730,6 @@ start_journal_io: blkdev_issue_flush(journal->j_dev, NULL); } - /* - * This is the right place to wait for data buffers both for ASYNC - * and !ASYNC commit. If commit is ASYNC, we need to wait only after - * the commit block went to disk (which happens above). If commit is - * SYNC, we need to wait for data buffers before we start writing - * commit block, which happens below in such setting. - */ err = journal_finish_inode_data_buffers(journal, commit_transaction); if (err) { printk(KERN_WARNING diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index b7ca3a92a4d..ac0d027595d 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -814,7 +814,7 @@ static journal_t * journal_init_common (void) journal_t *journal; int err; - journal = kzalloc(sizeof(*journal), GFP_KERNEL|__GFP_NOFAIL); + journal = kzalloc(sizeof(*journal), GFP_KERNEL); if (!journal) goto fail; @@ -2115,7 +2115,8 @@ static void __init jbd2_create_debugfs_entry(void) { jbd2_debugfs_dir = debugfs_create_dir("jbd2", NULL); if (jbd2_debugfs_dir) - jbd2_debug = debugfs_create_u8(JBD2_DEBUG_NAME, S_IRUGO, + jbd2_debug = debugfs_create_u8(JBD2_DEBUG_NAME, + S_IRUGO | S_IWUSR, jbd2_debugfs_dir, &jbd2_journal_enable_debug); } diff --git a/fs/namei.c b/fs/namei.c index 68921d9b530..b55440baf7a 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -232,6 +232,7 @@ int generic_permission(struct inode *inode, int mask, /* * Searching includes executable on directories, else just read. */ + mask &= MAY_READ | MAY_WRITE | MAY_EXEC; if (mask == MAY_READ || (S_ISDIR(inode->i_mode) && !(mask & MAY_WRITE))) if (capable(CAP_DAC_READ_SEARCH)) return 0; diff --git a/fs/ocfs2/Kconfig b/fs/ocfs2/Kconfig index 701b7a3a872..0d840669698 100644 --- a/fs/ocfs2/Kconfig +++ b/fs/ocfs2/Kconfig @@ -6,6 +6,7 @@ config OCFS2_FS select CRC32 select QUOTA select QUOTA_TREE + select FS_POSIX_ACL help OCFS2 is a general purpose extent based shared disk cluster file system with many similarities to ext3. It supports 64 bit inode @@ -74,12 +75,3 @@ config OCFS2_DEBUG_FS This option will enable expensive consistency checks. Enable this option for debugging only as it is likely to decrease performance of the filesystem. - -config OCFS2_FS_POSIX_ACL - bool "OCFS2 POSIX Access Control Lists" - depends on OCFS2_FS - select FS_POSIX_ACL - default n - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. diff --git a/fs/ocfs2/Makefile b/fs/ocfs2/Makefile index 31f25ce32c9..600d2d2ade1 100644 --- a/fs/ocfs2/Makefile +++ b/fs/ocfs2/Makefile @@ -39,11 +39,8 @@ ocfs2-objs := \ ver.o \ quota_local.o \ quota_global.o \ - xattr.o - -ifeq ($(CONFIG_OCFS2_FS_POSIX_ACL),y) -ocfs2-objs += acl.o -endif + xattr.o \ + acl.o ocfs2_stackglue-objs := stackglue.o ocfs2_stack_o2cb-objs := stack_o2cb.o diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c index e3e47415d85..0501974bedd 100644 --- a/fs/ocfs2/acl.c +++ b/fs/ocfs2/acl.c @@ -98,15 +98,11 @@ static struct posix_acl *ocfs2_get_acl_nolock(struct inode *inode, int type, struct buffer_head *di_bh) { - struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); int name_index; char *value = NULL; struct posix_acl *acl; int retval; - if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL)) - return NULL; - switch (type) { case ACL_TYPE_ACCESS: name_index = OCFS2_XATTR_INDEX_POSIX_ACL_ACCESS; diff --git a/fs/ocfs2/acl.h b/fs/ocfs2/acl.h index 8f6389ed4da..5c5d31f0585 100644 --- a/fs/ocfs2/acl.h +++ b/fs/ocfs2/acl.h @@ -26,8 +26,6 @@ struct ocfs2_acl_entry { __le32 e_id; }; -#ifdef CONFIG_OCFS2_FS_POSIX_ACL - extern int ocfs2_check_acl(struct inode *, int); extern int ocfs2_acl_chmod(struct inode *); extern int ocfs2_init_acl(handle_t *, struct inode *, struct inode *, @@ -35,24 +33,4 @@ extern int ocfs2_init_acl(handle_t *, struct inode *, struct inode *, struct ocfs2_alloc_context *, struct ocfs2_alloc_context *); -#else /* CONFIG_OCFS2_FS_POSIX_ACL*/ - -#define ocfs2_check_acl NULL -static inline int ocfs2_acl_chmod(struct inode *inode) -{ - return 0; -} -static inline int ocfs2_init_acl(handle_t *handle, - struct inode *inode, - struct inode *dir, - struct buffer_head *di_bh, - struct buffer_head *dir_bh, - struct ocfs2_alloc_context *meta_ac, - struct ocfs2_alloc_context *data_ac) -{ - return 0; -} - -#endif /* CONFIG_OCFS2_FS_POSIX_ACL*/ - #endif /* OCFS2_ACL_H */ diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index fb4e672579b..d17bdc718f7 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -1765,9 +1765,9 @@ set_and_inc: * * The array index of the subtree root is passed back. */ -static int ocfs2_find_subtree_root(struct ocfs2_extent_tree *et, - struct ocfs2_path *left, - struct ocfs2_path *right) +int ocfs2_find_subtree_root(struct ocfs2_extent_tree *et, + struct ocfs2_path *left, + struct ocfs2_path *right) { int i = 0; @@ -2872,8 +2872,8 @@ out: * This looks similar, but is subtly different to * ocfs2_find_cpos_for_left_leaf(). */ -static int ocfs2_find_cpos_for_right_leaf(struct super_block *sb, - struct ocfs2_path *path, u32 *cpos) +int ocfs2_find_cpos_for_right_leaf(struct super_block *sb, + struct ocfs2_path *path, u32 *cpos) { int i, j, ret = 0; u64 blkno; diff --git a/fs/ocfs2/alloc.h b/fs/ocfs2/alloc.h index 9c122d57446..1db4359ccb9 100644 --- a/fs/ocfs2/alloc.h +++ b/fs/ocfs2/alloc.h @@ -317,4 +317,9 @@ int ocfs2_path_bh_journal_access(handle_t *handle, int ocfs2_journal_access_path(struct ocfs2_caching_info *ci, handle_t *handle, struct ocfs2_path *path); +int ocfs2_find_cpos_for_right_leaf(struct super_block *sb, + struct ocfs2_path *path, u32 *cpos); +int ocfs2_find_subtree_root(struct ocfs2_extent_tree *et, + struct ocfs2_path *left, + struct ocfs2_path *right); #endif /* OCFS2_ALLOC_H */ diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index c452d116b89..eda5b8bcddd 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -176,7 +176,8 @@ static void o2hb_write_timeout(struct work_struct *work) static void o2hb_arm_write_timeout(struct o2hb_region *reg) { - mlog(0, "Queue write timeout for %u ms\n", O2HB_MAX_WRITE_TIMEOUT_MS); + mlog(ML_HEARTBEAT, "Queue write timeout for %u ms\n", + O2HB_MAX_WRITE_TIMEOUT_MS); cancel_delayed_work(®->hr_write_timeout_work); reg->hr_last_timeout_start = jiffies; @@ -874,7 +875,8 @@ static int o2hb_thread(void *data) do_gettimeofday(&after_hb); elapsed_msec = o2hb_elapsed_msecs(&before_hb, &after_hb); - mlog(0, "start = %lu.%lu, end = %lu.%lu, msec = %u\n", + mlog(ML_HEARTBEAT, + "start = %lu.%lu, end = %lu.%lu, msec = %u\n", before_hb.tv_sec, (unsigned long) before_hb.tv_usec, after_hb.tv_sec, (unsigned long) after_hb.tv_usec, elapsed_msec); diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c index 7ee6188bc79..c81142e3ef8 100644 --- a/fs/ocfs2/cluster/nodemanager.c +++ b/fs/ocfs2/cluster/nodemanager.c @@ -35,6 +35,10 @@ * cluster references throughout where nodes are looked up */ struct o2nm_cluster *o2nm_single_cluster = NULL; +char *o2nm_fence_method_desc[O2NM_FENCE_METHODS] = { + "reset", /* O2NM_FENCE_RESET */ + "panic", /* O2NM_FENCE_PANIC */ +}; struct o2nm_node *o2nm_get_node_by_num(u8 node_num) { @@ -579,6 +583,43 @@ static ssize_t o2nm_cluster_attr_reconnect_delay_ms_write( return o2nm_cluster_attr_write(page, count, &cluster->cl_reconnect_delay_ms); } + +static ssize_t o2nm_cluster_attr_fence_method_read( + struct o2nm_cluster *cluster, char *page) +{ + ssize_t ret = 0; + + if (cluster) + ret = sprintf(page, "%s\n", + o2nm_fence_method_desc[cluster->cl_fence_method]); + return ret; +} + +static ssize_t o2nm_cluster_attr_fence_method_write( + struct o2nm_cluster *cluster, const char *page, size_t count) +{ + unsigned int i; + + if (page[count - 1] != '\n') + goto bail; + + for (i = 0; i < O2NM_FENCE_METHODS; ++i) { + if (count != strlen(o2nm_fence_method_desc[i]) + 1) + continue; + if (strncasecmp(page, o2nm_fence_method_desc[i], count - 1)) + continue; + if (cluster->cl_fence_method != i) { + printk(KERN_INFO "ocfs2: Changing fence method to %s\n", + o2nm_fence_method_desc[i]); + cluster->cl_fence_method = i; + } + return count; + } + +bail: + return -EINVAL; +} + static struct o2nm_cluster_attribute o2nm_cluster_attr_idle_timeout_ms = { .attr = { .ca_owner = THIS_MODULE, .ca_name = "idle_timeout_ms", @@ -603,10 +644,19 @@ static struct o2nm_cluster_attribute o2nm_cluster_attr_reconnect_delay_ms = { .store = o2nm_cluster_attr_reconnect_delay_ms_write, }; +static struct o2nm_cluster_attribute o2nm_cluster_attr_fence_method = { + .attr = { .ca_owner = THIS_MODULE, + .ca_name = "fence_method", + .ca_mode = S_IRUGO | S_IWUSR }, + .show = o2nm_cluster_attr_fence_method_read, + .store = o2nm_cluster_attr_fence_method_write, +}; + static struct configfs_attribute *o2nm_cluster_attrs[] = { &o2nm_cluster_attr_idle_timeout_ms.attr, &o2nm_cluster_attr_keepalive_delay_ms.attr, &o2nm_cluster_attr_reconnect_delay_ms.attr, + &o2nm_cluster_attr_fence_method.attr, NULL, }; static ssize_t o2nm_cluster_show(struct config_item *item, @@ -778,6 +828,7 @@ static struct config_group *o2nm_cluster_group_make_group(struct config_group *g cluster->cl_reconnect_delay_ms = O2NET_RECONNECT_DELAY_MS_DEFAULT; cluster->cl_idle_timeout_ms = O2NET_IDLE_TIMEOUT_MS_DEFAULT; cluster->cl_keepalive_delay_ms = O2NET_KEEPALIVE_DELAY_MS_DEFAULT; + cluster->cl_fence_method = O2NM_FENCE_RESET; ret = &cluster->cl_group; o2nm_single_cluster = cluster; diff --git a/fs/ocfs2/cluster/nodemanager.h b/fs/ocfs2/cluster/nodemanager.h index c992ea0da4a..09ea2d388bb 100644 --- a/fs/ocfs2/cluster/nodemanager.h +++ b/fs/ocfs2/cluster/nodemanager.h @@ -33,6 +33,12 @@ #include <linux/configfs.h> #include <linux/rbtree.h> +enum o2nm_fence_method { + O2NM_FENCE_RESET = 0, + O2NM_FENCE_PANIC, + O2NM_FENCE_METHODS, /* Number of fence methods */ +}; + struct o2nm_node { spinlock_t nd_lock; struct config_item nd_item; @@ -58,6 +64,7 @@ struct o2nm_cluster { unsigned int cl_idle_timeout_ms; unsigned int cl_keepalive_delay_ms; unsigned int cl_reconnect_delay_ms; + enum o2nm_fence_method cl_fence_method; /* this bitmap is part of a hack for disk bitmap.. will go eventually. - zab */ unsigned long cl_nodes_bitmap[BITS_TO_LONGS(O2NM_MAX_NODES)]; diff --git a/fs/ocfs2/cluster/quorum.c b/fs/ocfs2/cluster/quorum.c index bbacf7da48a..639024033fc 100644 --- a/fs/ocfs2/cluster/quorum.c +++ b/fs/ocfs2/cluster/quorum.c @@ -74,8 +74,20 @@ static void o2quo_fence_self(void) * threads can still schedule, etc, etc */ o2hb_stop_all_regions(); - printk("ocfs2 is very sorry to be fencing this system by restarting\n"); - emergency_restart(); + switch (o2nm_single_cluster->cl_fence_method) { + case O2NM_FENCE_PANIC: + panic("*** ocfs2 is very sorry to be fencing this system by " + "panicing ***\n"); + break; + default: + WARN_ON(o2nm_single_cluster->cl_fence_method >= + O2NM_FENCE_METHODS); + case O2NM_FENCE_RESET: + printk(KERN_ERR "*** ocfs2 is very sorry to be fencing this " + "system by restarting ***\n"); + emergency_restart(); + break; + }; } /* Indicate that a timeout occured on a hearbeat region write. The diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index d9fa3d22e17..2f9e4e19a4f 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -2589,6 +2589,14 @@ retry: "begin reco msg (%d)\n", dlm->name, nodenum, ret); ret = 0; } + if (ret == -EAGAIN) { + mlog(0, "%s: trying to start recovery of node " + "%u, but node %u is waiting for last recovery " + "to complete, backoff for a bit\n", dlm->name, + dead_node, nodenum); + msleep(100); + goto retry; + } if (ret < 0) { struct dlm_lock_resource *res; /* this is now a serious problem, possibly ENOMEM @@ -2608,14 +2616,6 @@ retry: * another ENOMEM */ msleep(100); goto retry; - } else if (ret == EAGAIN) { - mlog(0, "%s: trying to start recovery of node " - "%u, but node %u is waiting for last recovery " - "to complete, backoff for a bit\n", dlm->name, - dead_node, nodenum); - /* TODO Look into replacing msleep with cond_resched() */ - msleep(100); - goto retry; } } @@ -2639,7 +2639,7 @@ int dlm_begin_reco_handler(struct o2net_msg *msg, u32 len, void *data, dlm->name, br->node_idx, br->dead_node, dlm->reco.dead_node, dlm->reco.new_master); spin_unlock(&dlm->spinlock); - return EAGAIN; + return -EAGAIN; } spin_unlock(&dlm->spinlock); diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c index 843db64e9d4..d35a27f4523 100644 --- a/fs/ocfs2/extent_map.c +++ b/fs/ocfs2/extent_map.c @@ -37,6 +37,7 @@ #include "extent_map.h" #include "inode.h" #include "super.h" +#include "symlink.h" #include "buffer_head_io.h" @@ -703,6 +704,12 @@ out: return ret; } +/* + * The ocfs2_fiemap_inline() may be a little bit misleading, since + * it not only handles the fiemap for inlined files, but also deals + * with the fast symlink, cause they have no difference for extent + * mapping per se. + */ static int ocfs2_fiemap_inline(struct inode *inode, struct buffer_head *di_bh, struct fiemap_extent_info *fieinfo, u64 map_start) @@ -715,11 +722,18 @@ static int ocfs2_fiemap_inline(struct inode *inode, struct buffer_head *di_bh, struct ocfs2_inode_info *oi = OCFS2_I(inode); di = (struct ocfs2_dinode *)di_bh->b_data; - id_count = le16_to_cpu(di->id2.i_data.id_count); + if (ocfs2_inode_is_fast_symlink(inode)) + id_count = ocfs2_fast_symlink_chars(inode->i_sb); + else + id_count = le16_to_cpu(di->id2.i_data.id_count); if (map_start < id_count) { phys = oi->ip_blkno << inode->i_sb->s_blocksize_bits; - phys += offsetof(struct ocfs2_dinode, id2.i_data.id_data); + if (ocfs2_inode_is_fast_symlink(inode)) + phys += offsetof(struct ocfs2_dinode, id2.i_symlink); + else + phys += offsetof(struct ocfs2_dinode, + id2.i_data.id_data); ret = fiemap_fill_next_extent(fieinfo, 0, phys, id_count, flags); @@ -756,9 +770,10 @@ int ocfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, down_read(&OCFS2_I(inode)->ip_alloc_sem); /* - * Handle inline-data separately. + * Handle inline-data and fast symlink separately. */ - if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { + if ((OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) || + ocfs2_inode_is_fast_symlink(inode)) { ret = ocfs2_fiemap_inline(inode, di_bh, fieinfo, map_start); goto out_unlock; } @@ -786,6 +801,8 @@ int ocfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, fe_flags = 0; if (rec.e_flags & OCFS2_EXT_UNWRITTEN) fe_flags |= FIEMAP_EXTENT_UNWRITTEN; + if (rec.e_flags & OCFS2_EXT_REFCOUNTED) + fe_flags |= FIEMAP_EXTENT_SHARED; if (is_last) fe_flags |= FIEMAP_EXTENT_LAST; len_bytes = (u64)le16_to_cpu(rec.e_leaf_clusters) << osb->s_clustersize_bits; diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index f010b22b1c4..50fb26a6a5f 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -2108,6 +2108,7 @@ int ocfs2_create_inode_in_orphan(struct inode *dir, } did_quota_inode = 1; + inode->i_nlink = 0; /* do the real work now. */ status = ocfs2_mknod_locked(osb, dir, inode, 0, &new_di_bh, parent_di_bh, handle, @@ -2136,6 +2137,7 @@ int ocfs2_create_inode_in_orphan(struct inode *dir, if (status < 0) mlog_errno(status); + insert_inode_hash(inode); leave: if (status < 0 && did_quota_inode) vfs_dq_free_inode(inode); @@ -2267,6 +2269,8 @@ int ocfs2_mv_orphaned_inode_to_new(struct inode *dir, di = (struct ocfs2_dinode *)di_bh->b_data; le32_add_cpu(&di->i_flags, -OCFS2_ORPHANED_FL); di->i_orphaned_slot = 0; + inode->i_nlink = 1; + ocfs2_set_links_count(di, inode->i_nlink); ocfs2_journal_dirty(handle, di_bh); status = ocfs2_add_entry(handle, dentry, inode, @@ -2284,7 +2288,6 @@ int ocfs2_mv_orphaned_inode_to_new(struct inode *dir, goto out_commit; } - insert_inode_hash(inode); dentry->d_op = &ocfs2_dentry_ops; d_instantiate(dentry, inode); status = 0; @@ -2326,4 +2329,5 @@ const struct inode_operations ocfs2_dir_iops = { .getxattr = generic_getxattr, .listxattr = ocfs2_listxattr, .removexattr = generic_removexattr, + .fiemap = ocfs2_fiemap, }; diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index d963d863870..9362eea7424 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -245,9 +245,11 @@ enum ocfs2_mount_options OCFS2_MOUNT_LOCALFLOCKS = 1 << 5, /* No cluster aware user file locks */ OCFS2_MOUNT_NOUSERXATTR = 1 << 6, /* No user xattr */ OCFS2_MOUNT_INODE64 = 1 << 7, /* Allow inode numbers > 2^32 */ - OCFS2_MOUNT_POSIX_ACL = 1 << 8, /* POSIX access control lists */ - OCFS2_MOUNT_USRQUOTA = 1 << 9, /* We support user quotas */ - OCFS2_MOUNT_GRPQUOTA = 1 << 10, /* We support group quotas */ + OCFS2_MOUNT_POSIX_ACL = 1 << 8, /* Force POSIX access control lists */ + OCFS2_MOUNT_NO_POSIX_ACL = 1 << 9, /* Disable POSIX access + control lists */ + OCFS2_MOUNT_USRQUOTA = 1 << 10, /* We support user quotas */ + OCFS2_MOUNT_GRPQUOTA = 1 << 11, /* We support group quotas */ }; #define OCFS2_OSB_SOFT_RO 0x0001 diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index e9431e4a5e7..1a1a679e51b 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -1202,7 +1202,7 @@ struct ocfs2_local_disk_dqinfo { /* Header of one chunk of a quota file */ struct ocfs2_local_disk_chunk { __le32 dqc_free; /* Number of free entries in the bitmap */ - u8 dqc_bitmap[0]; /* Bitmap of entries in the corresponding + __u8 dqc_bitmap[0]; /* Bitmap of entries in the corresponding * chunk of quota file */ }; diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index 30967e3f5e4..74db2be75dd 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -276,7 +276,7 @@ static void ocfs2_erase_refcount_tree_from_list(struct ocfs2_super *osb, spin_unlock(&osb->osb_lock); } -void ocfs2_kref_remove_refcount_tree(struct kref *kref) +static void ocfs2_kref_remove_refcount_tree(struct kref *kref) { struct ocfs2_refcount_tree *tree = container_of(kref, struct ocfs2_refcount_tree, rf_getcnt); @@ -524,23 +524,6 @@ out: return ret; } -int ocfs2_lock_refcount_tree_by_inode(struct inode *inode, int rw, - struct ocfs2_refcount_tree **ret_tree, - struct buffer_head **ref_bh) -{ - int ret; - u64 ref_blkno; - - ret = ocfs2_get_refcount_block(inode, &ref_blkno); - if (ret) { - mlog_errno(ret); - return ret; - } - - return ocfs2_lock_refcount_tree(OCFS2_SB(inode->i_sb), ref_blkno, - rw, ret_tree, ref_bh); -} - void ocfs2_unlock_refcount_tree(struct ocfs2_super *osb, struct ocfs2_refcount_tree *tree, int rw) { @@ -969,6 +952,103 @@ out: } /* + * Find the end range for a leaf refcount block indicated by + * el->l_recs[index].e_blkno. + */ +static int ocfs2_get_refcount_cpos_end(struct ocfs2_caching_info *ci, + struct buffer_head *ref_root_bh, + struct ocfs2_extent_block *eb, + struct ocfs2_extent_list *el, + int index, u32 *cpos_end) +{ + int ret, i, subtree_root; + u32 cpos; + u64 blkno; + struct super_block *sb = ocfs2_metadata_cache_get_super(ci); + struct ocfs2_path *left_path = NULL, *right_path = NULL; + struct ocfs2_extent_tree et; + struct ocfs2_extent_list *tmp_el; + + if (index < le16_to_cpu(el->l_next_free_rec) - 1) { + /* + * We have a extent rec after index, so just use the e_cpos + * of the next extent rec. + */ + *cpos_end = le32_to_cpu(el->l_recs[index+1].e_cpos); + return 0; + } + + if (!eb || (eb && !eb->h_next_leaf_blk)) { + /* + * We are the last extent rec, so any high cpos should + * be stored in this leaf refcount block. + */ + *cpos_end = UINT_MAX; + return 0; + } + + /* + * If the extent block isn't the last one, we have to find + * the subtree root between this extent block and the next + * leaf extent block and get the corresponding e_cpos from + * the subroot. Otherwise we may corrupt the b-tree. + */ + ocfs2_init_refcount_extent_tree(&et, ci, ref_root_bh); + + left_path = ocfs2_new_path_from_et(&et); + if (!left_path) { + ret = -ENOMEM; + mlog_errno(ret); + goto out; + } + + cpos = le32_to_cpu(eb->h_list.l_recs[index].e_cpos); + ret = ocfs2_find_path(ci, left_path, cpos); + if (ret) { + mlog_errno(ret); + goto out; + } + + right_path = ocfs2_new_path_from_path(left_path); + if (!right_path) { + ret = -ENOMEM; + mlog_errno(ret); + goto out; + } + + ret = ocfs2_find_cpos_for_right_leaf(sb, left_path, &cpos); + if (ret) { + mlog_errno(ret); + goto out; + } + + ret = ocfs2_find_path(ci, right_path, cpos); + if (ret) { + mlog_errno(ret); + goto out; + } + + subtree_root = ocfs2_find_subtree_root(&et, left_path, + right_path); + + tmp_el = left_path->p_node[subtree_root].el; + blkno = left_path->p_node[subtree_root+1].bh->b_blocknr; + for (i = 0; i < le32_to_cpu(tmp_el->l_next_free_rec); i++) { + if (le64_to_cpu(tmp_el->l_recs[i].e_blkno) == blkno) { + *cpos_end = le32_to_cpu(tmp_el->l_recs[i+1].e_cpos); + break; + } + } + + BUG_ON(i == le32_to_cpu(tmp_el->l_next_free_rec)); + +out: + ocfs2_free_path(left_path); + ocfs2_free_path(right_path); + return ret; +} + +/* * Given a cpos and len, try to find the refcount record which contains cpos. * 1. If cpos can be found in one refcount record, return the record. * 2. If cpos can't be found, return a fake record which start from cpos @@ -983,10 +1063,10 @@ static int ocfs2_get_refcount_rec(struct ocfs2_caching_info *ci, struct buffer_head **ret_bh) { int ret = 0, i, found; - u32 low_cpos; + u32 low_cpos, uninitialized_var(cpos_end); struct ocfs2_extent_list *el; - struct ocfs2_extent_rec *tmp, *rec = NULL; - struct ocfs2_extent_block *eb; + struct ocfs2_extent_rec *rec = NULL; + struct ocfs2_extent_block *eb = NULL; struct buffer_head *eb_bh = NULL, *ref_leaf_bh = NULL; struct super_block *sb = ocfs2_metadata_cache_get_super(ci); struct ocfs2_refcount_block *rb = @@ -1034,12 +1114,16 @@ static int ocfs2_get_refcount_rec(struct ocfs2_caching_info *ci, } } - /* adjust len when we have ocfs2_extent_rec after it. */ - if (found && i < le16_to_cpu(el->l_next_free_rec) - 1) { - tmp = &el->l_recs[i+1]; + if (found) { + ret = ocfs2_get_refcount_cpos_end(ci, ref_root_bh, + eb, el, i, &cpos_end); + if (ret) { + mlog_errno(ret); + goto out; + } - if (le32_to_cpu(tmp->e_cpos) < cpos + len) - len = le32_to_cpu(tmp->e_cpos) - cpos; + if (cpos_end < low_cpos + len) + len = cpos_end - low_cpos; } ret = ocfs2_read_refcount_block(ci, le64_to_cpu(rec->e_blkno), @@ -1418,7 +1502,7 @@ static int ocfs2_divide_leaf_refcount_block(struct buffer_head *ref_leaf_bh, /* change old and new rl_used accordingly. */ le16_add_cpu(&rl->rl_used, -num_moved); - new_rl->rl_used = cpu_to_le32(num_moved); + new_rl->rl_used = cpu_to_le16(num_moved); sort(&rl->rl_recs, le16_to_cpu(rl->rl_used), sizeof(struct ocfs2_refcount_rec), @@ -1797,7 +1881,8 @@ static int ocfs2_split_refcount_rec(handle_t *handle, recs_need++; /* If the leaf block don't have enough record, expand it. */ - if (le16_to_cpu(rf_list->rl_used) + recs_need > rf_list->rl_count) { + if (le16_to_cpu(rf_list->rl_used) + recs_need > + le16_to_cpu(rf_list->rl_count)) { struct ocfs2_refcount_rec tmp_rec; u64 cpos = le64_to_cpu(orig_rec->r_cpos); len = le32_to_cpu(orig_rec->r_clusters); @@ -1859,7 +1944,7 @@ static int ocfs2_split_refcount_rec(handle_t *handle, memcpy(tail_rec, orig_rec, sizeof(struct ocfs2_refcount_rec)); le64_add_cpu(&tail_rec->r_cpos, le32_to_cpu(tail_rec->r_clusters) - len); - tail_rec->r_clusters = le32_to_cpu(len); + tail_rec->r_clusters = cpu_to_le32(len); } /* @@ -3840,8 +3925,7 @@ static int ocfs2_add_refcounted_extent(struct inode *inode, } ret = ocfs2_insert_extent(handle, et, cpos, - cpu_to_le64(ocfs2_clusters_to_blocks(inode->i_sb, - p_cluster)), + ocfs2_clusters_to_blocks(inode->i_sb, p_cluster), num_clusters, ext_flags, meta_ac); if (ret) { mlog_errno(ret); @@ -4253,8 +4337,8 @@ static int ocfs2_user_path_parent(const char __user *path, * @new_dentry: target dentry * @preserve: if true, preserve all file attributes */ -int ocfs2_vfs_reflink(struct dentry *old_dentry, struct inode *dir, - struct dentry *new_dentry, bool preserve) +static int ocfs2_vfs_reflink(struct dentry *old_dentry, struct inode *dir, + struct dentry *new_dentry, bool preserve) { struct inode *inode = old_dentry->d_inode; int error; diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c index ff4c798a563..da78a2a334f 100644 --- a/fs/ocfs2/stack_user.c +++ b/fs/ocfs2/stack_user.c @@ -814,7 +814,7 @@ static int fs_protocol_compare(struct ocfs2_protocol_version *existing, static int user_cluster_connect(struct ocfs2_cluster_connection *conn) { dlm_lockspace_t *fsdlm; - struct ocfs2_live_connection *control; + struct ocfs2_live_connection *uninitialized_var(control); int rc = 0; BUG_ON(conn == NULL); diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 14f47d2bfe0..26069917a9f 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -100,6 +100,8 @@ struct mount_options static int ocfs2_parse_options(struct super_block *sb, char *options, struct mount_options *mopt, int is_remount); +static int ocfs2_check_set_options(struct super_block *sb, + struct mount_options *options); static int ocfs2_show_options(struct seq_file *s, struct vfsmount *mnt); static void ocfs2_put_super(struct super_block *sb); static int ocfs2_mount_volume(struct super_block *sb); @@ -600,7 +602,8 @@ static int ocfs2_remount(struct super_block *sb, int *flags, char *data) lock_kernel(); - if (!ocfs2_parse_options(sb, data, &parsed_options, 1)) { + if (!ocfs2_parse_options(sb, data, &parsed_options, 1) || + !ocfs2_check_set_options(sb, &parsed_options)) { ret = -EINVAL; goto out; } @@ -691,8 +694,6 @@ unlock_osb: if (!ret) { /* Only save off the new mount options in case of a successful * remount. */ - if (!(osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_XATTR)) - parsed_options.mount_opt &= ~OCFS2_MOUNT_POSIX_ACL; osb->s_mount_opt = parsed_options.mount_opt; osb->s_atime_quantum = parsed_options.atime_quantum; osb->preferred_slot = parsed_options.slot; @@ -701,6 +702,10 @@ unlock_osb: if (!ocfs2_is_hard_readonly(osb)) ocfs2_set_journal_params(osb); + + sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | + ((osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) ? + MS_POSIXACL : 0); } out: unlock_kernel(); @@ -1011,31 +1016,16 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent) brelse(bh); bh = NULL; - if (!(osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_XATTR)) - parsed_options.mount_opt &= ~OCFS2_MOUNT_POSIX_ACL; - + if (!ocfs2_check_set_options(sb, &parsed_options)) { + status = -EINVAL; + goto read_super_error; + } osb->s_mount_opt = parsed_options.mount_opt; osb->s_atime_quantum = parsed_options.atime_quantum; osb->preferred_slot = parsed_options.slot; osb->osb_commit_interval = parsed_options.commit_interval; osb->local_alloc_default_bits = ocfs2_megabytes_to_clusters(sb, parsed_options.localalloc_opt); osb->local_alloc_bits = osb->local_alloc_default_bits; - if (osb->s_mount_opt & OCFS2_MOUNT_USRQUOTA && - !OCFS2_HAS_RO_COMPAT_FEATURE(sb, - OCFS2_FEATURE_RO_COMPAT_USRQUOTA)) { - status = -EINVAL; - mlog(ML_ERROR, "User quotas were requested, but this " - "filesystem does not have the feature enabled.\n"); - goto read_super_error; - } - if (osb->s_mount_opt & OCFS2_MOUNT_GRPQUOTA && - !OCFS2_HAS_RO_COMPAT_FEATURE(sb, - OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)) { - status = -EINVAL; - mlog(ML_ERROR, "Group quotas were requested, but this " - "filesystem does not have the feature enabled.\n"); - goto read_super_error; - } status = ocfs2_verify_userspace_stack(osb, &parsed_options); if (status) @@ -1245,6 +1235,40 @@ static struct file_system_type ocfs2_fs_type = { .next = NULL }; +static int ocfs2_check_set_options(struct super_block *sb, + struct mount_options *options) +{ + if (options->mount_opt & OCFS2_MOUNT_USRQUOTA && + !OCFS2_HAS_RO_COMPAT_FEATURE(sb, + OCFS2_FEATURE_RO_COMPAT_USRQUOTA)) { + mlog(ML_ERROR, "User quotas were requested, but this " + "filesystem does not have the feature enabled.\n"); + return 0; + } + if (options->mount_opt & OCFS2_MOUNT_GRPQUOTA && + !OCFS2_HAS_RO_COMPAT_FEATURE(sb, + OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)) { + mlog(ML_ERROR, "Group quotas were requested, but this " + "filesystem does not have the feature enabled.\n"); + return 0; + } + if (options->mount_opt & OCFS2_MOUNT_POSIX_ACL && + !OCFS2_HAS_INCOMPAT_FEATURE(sb, OCFS2_FEATURE_INCOMPAT_XATTR)) { + mlog(ML_ERROR, "ACL support requested but extended attributes " + "feature is not enabled\n"); + return 0; + } + /* No ACL setting specified? Use XATTR feature... */ + if (!(options->mount_opt & (OCFS2_MOUNT_POSIX_ACL | + OCFS2_MOUNT_NO_POSIX_ACL))) { + if (OCFS2_HAS_INCOMPAT_FEATURE(sb, OCFS2_FEATURE_INCOMPAT_XATTR)) + options->mount_opt |= OCFS2_MOUNT_POSIX_ACL; + else + options->mount_opt |= OCFS2_MOUNT_NO_POSIX_ACL; + } + return 1; +} + static int ocfs2_parse_options(struct super_block *sb, char *options, struct mount_options *mopt, @@ -1392,40 +1416,19 @@ static int ocfs2_parse_options(struct super_block *sb, mopt->mount_opt |= OCFS2_MOUNT_INODE64; break; case Opt_usrquota: - /* We check only on remount, otherwise features - * aren't yet initialized. */ - if (is_remount && !OCFS2_HAS_RO_COMPAT_FEATURE(sb, - OCFS2_FEATURE_RO_COMPAT_USRQUOTA)) { - mlog(ML_ERROR, "User quota requested but " - "filesystem feature is not set\n"); - status = 0; - goto bail; - } mopt->mount_opt |= OCFS2_MOUNT_USRQUOTA; break; case Opt_grpquota: - if (is_remount && !OCFS2_HAS_RO_COMPAT_FEATURE(sb, - OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)) { - mlog(ML_ERROR, "Group quota requested but " - "filesystem feature is not set\n"); - status = 0; - goto bail; - } mopt->mount_opt |= OCFS2_MOUNT_GRPQUOTA; break; -#ifdef CONFIG_OCFS2_FS_POSIX_ACL case Opt_acl: mopt->mount_opt |= OCFS2_MOUNT_POSIX_ACL; + mopt->mount_opt &= ~OCFS2_MOUNT_NO_POSIX_ACL; break; case Opt_noacl: + mopt->mount_opt |= OCFS2_MOUNT_NO_POSIX_ACL; mopt->mount_opt &= ~OCFS2_MOUNT_POSIX_ACL; break; -#else - case Opt_acl: - case Opt_noacl: - printk(KERN_INFO "ocfs2 (no)acl options not supported\n"); - break; -#endif default: mlog(ML_ERROR, "Unrecognized mount option \"%s\" " @@ -1502,12 +1505,10 @@ static int ocfs2_show_options(struct seq_file *s, struct vfsmount *mnt) if (opts & OCFS2_MOUNT_INODE64) seq_printf(s, ",inode64"); -#ifdef CONFIG_OCFS2_FS_POSIX_ACL if (opts & OCFS2_MOUNT_POSIX_ACL) seq_printf(s, ",acl"); else seq_printf(s, ",noacl"); -#endif return 0; } diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c index e3421030a69..49b133ccbf1 100644 --- a/fs/ocfs2/symlink.c +++ b/fs/ocfs2/symlink.c @@ -163,6 +163,7 @@ const struct inode_operations ocfs2_symlink_inode_operations = { .getxattr = generic_getxattr, .listxattr = ocfs2_listxattr, .removexattr = generic_removexattr, + .fiemap = ocfs2_fiemap, }; const struct inode_operations ocfs2_fast_symlink_inode_operations = { .readlink = ocfs2_readlink, @@ -174,4 +175,5 @@ const struct inode_operations ocfs2_fast_symlink_inode_operations = { .getxattr = generic_getxattr, .listxattr = ocfs2_listxattr, .removexattr = generic_removexattr, + .fiemap = ocfs2_fiemap, }; diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 43c114831c0..8fc6fb071c6 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -98,10 +98,8 @@ static struct ocfs2_xattr_def_value_root def_xv = { struct xattr_handler *ocfs2_xattr_handlers[] = { &ocfs2_xattr_user_handler, -#ifdef CONFIG_OCFS2_FS_POSIX_ACL &ocfs2_xattr_acl_access_handler, &ocfs2_xattr_acl_default_handler, -#endif &ocfs2_xattr_trusted_handler, &ocfs2_xattr_security_handler, NULL @@ -109,12 +107,10 @@ struct xattr_handler *ocfs2_xattr_handlers[] = { static struct xattr_handler *ocfs2_xattr_handler_map[OCFS2_XATTR_MAX] = { [OCFS2_XATTR_INDEX_USER] = &ocfs2_xattr_user_handler, -#ifdef CONFIG_OCFS2_FS_POSIX_ACL [OCFS2_XATTR_INDEX_POSIX_ACL_ACCESS] = &ocfs2_xattr_acl_access_handler, [OCFS2_XATTR_INDEX_POSIX_ACL_DEFAULT] = &ocfs2_xattr_acl_default_handler, -#endif [OCFS2_XATTR_INDEX_TRUSTED] = &ocfs2_xattr_trusted_handler, [OCFS2_XATTR_INDEX_SECURITY] = &ocfs2_xattr_security_handler, }; @@ -6064,7 +6060,7 @@ static int ocfs2_value_metas_in_xattr_header(struct super_block *sb, * to the extent block, so just calculate a maximum record num. */ if (!xv->xr_list.l_tree_depth) - *num_recs += xv->xr_list.l_next_free_rec; + *num_recs += le16_to_cpu(xv->xr_list.l_next_free_rec); else *num_recs += ocfs2_clusters_for_bytes(sb, XATTR_SIZE_MAX); diff --git a/fs/ocfs2/xattr.h b/fs/ocfs2/xattr.h index 08e36389f56..abd72a47f52 100644 --- a/fs/ocfs2/xattr.h +++ b/fs/ocfs2/xattr.h @@ -40,10 +40,8 @@ struct ocfs2_security_xattr_info { extern struct xattr_handler ocfs2_xattr_user_handler; extern struct xattr_handler ocfs2_xattr_trusted_handler; extern struct xattr_handler ocfs2_xattr_security_handler; -#ifdef CONFIG_OCFS2_FS_POSIX_ACL extern struct xattr_handler ocfs2_xattr_acl_access_handler; extern struct xattr_handler ocfs2_xattr_acl_default_handler; -#endif extern struct xattr_handler *ocfs2_xattr_handlers[]; ssize_t ocfs2_listxattr(struct dentry *, char *, size_t); diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index cd6bb9a33c1..dea86abdf2e 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -323,6 +323,30 @@ int dquot_mark_dquot_dirty(struct dquot *dquot) } EXPORT_SYMBOL(dquot_mark_dquot_dirty); +/* Dirtify all the dquots - this can block when journalling */ +static inline int mark_all_dquot_dirty(struct dquot * const *dquot) +{ + int ret, err, cnt; + + ret = err = 0; + for (cnt = 0; cnt < MAXQUOTAS; cnt++) { + if (dquot[cnt]) + /* Even in case of error we have to continue */ + ret = mark_dquot_dirty(dquot[cnt]); + if (!err) + err = ret; + } + return err; +} + +static inline void dqput_all(struct dquot **dquot) +{ + unsigned int cnt; + + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + dqput(dquot[cnt]); +} + /* This function needs dq_list_lock */ static inline int clear_dquot_dirty(struct dquot *dquot) { @@ -1268,8 +1292,7 @@ int dquot_initialize(struct inode *inode, int type) out_err: up_write(&sb_dqopt(sb)->dqptr_sem); /* Drop unused references */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - dqput(got[cnt]); + dqput_all(got); return ret; } EXPORT_SYMBOL(dquot_initialize); @@ -1288,9 +1311,7 @@ int dquot_drop(struct inode *inode) inode->i_dquot[cnt] = NULL; } up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - dqput(put[cnt]); + dqput_all(put); return 0; } EXPORT_SYMBOL(dquot_drop); @@ -1319,6 +1340,67 @@ void vfs_dq_drop(struct inode *inode) EXPORT_SYMBOL(vfs_dq_drop); /* + * inode_reserved_space is managed internally by quota, and protected by + * i_lock similar to i_blocks+i_bytes. + */ +static qsize_t *inode_reserved_space(struct inode * inode) +{ + /* Filesystem must explicitly define it's own method in order to use + * quota reservation interface */ + BUG_ON(!inode->i_sb->dq_op->get_reserved_space); + return inode->i_sb->dq_op->get_reserved_space(inode); +} + +static void inode_add_rsv_space(struct inode *inode, qsize_t number) +{ + spin_lock(&inode->i_lock); + *inode_reserved_space(inode) += number; + spin_unlock(&inode->i_lock); +} + + +static void inode_claim_rsv_space(struct inode *inode, qsize_t number) +{ + spin_lock(&inode->i_lock); + *inode_reserved_space(inode) -= number; + __inode_add_bytes(inode, number); + spin_unlock(&inode->i_lock); +} + +static void inode_sub_rsv_space(struct inode *inode, qsize_t number) +{ + spin_lock(&inode->i_lock); + *inode_reserved_space(inode) -= number; + spin_unlock(&inode->i_lock); +} + +static qsize_t inode_get_rsv_space(struct inode *inode) +{ + qsize_t ret; + spin_lock(&inode->i_lock); + ret = *inode_reserved_space(inode); + spin_unlock(&inode->i_lock); + return ret; +} + +static void inode_incr_space(struct inode *inode, qsize_t number, + int reserve) +{ + if (reserve) + inode_add_rsv_space(inode, number); + else + inode_add_bytes(inode, number); +} + +static void inode_decr_space(struct inode *inode, qsize_t number, int reserve) +{ + if (reserve) + inode_sub_rsv_space(inode, number); + else + inode_sub_bytes(inode, number); +} + +/* * Following four functions update i_blocks+i_bytes fields and * quota information (together with appropriate checks) * NOTE: We absolutely rely on the fact that caller dirties @@ -1336,6 +1418,21 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int cnt, ret = QUOTA_OK; char warntype[MAXQUOTAS]; + /* + * First test before acquiring mutex - solves deadlocks when we + * re-enter the quota code and are already holding the mutex + */ + if (IS_NOQUOTA(inode)) { + inode_incr_space(inode, number, reserve); + goto out; + } + + down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); + if (IS_NOQUOTA(inode)) { + inode_incr_space(inode, number, reserve); + goto out_unlock; + } + for (cnt = 0; cnt < MAXQUOTAS; cnt++) warntype[cnt] = QUOTA_NL_NOWARN; @@ -1346,7 +1443,8 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, if (check_bdq(inode->i_dquot[cnt], number, warn, warntype+cnt) == NO_QUOTA) { ret = NO_QUOTA; - goto out_unlock; + spin_unlock(&dq_data_lock); + goto out_flush_warn; } } for (cnt = 0; cnt < MAXQUOTAS; cnt++) { @@ -1357,64 +1455,29 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, else dquot_incr_space(inode->i_dquot[cnt], number); } - if (!reserve) - inode_add_bytes(inode, number); -out_unlock: + inode_incr_space(inode, number, reserve); spin_unlock(&dq_data_lock); + + if (reserve) + goto out_flush_warn; + mark_all_dquot_dirty(inode->i_dquot); +out_flush_warn: flush_warnings(inode->i_dquot, warntype); +out_unlock: + up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); +out: return ret; } int dquot_alloc_space(struct inode *inode, qsize_t number, int warn) { - int cnt, ret = QUOTA_OK; - - /* - * First test before acquiring mutex - solves deadlocks when we - * re-enter the quota code and are already holding the mutex - */ - if (IS_NOQUOTA(inode)) { - inode_add_bytes(inode, number); - goto out; - } - - down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); - if (IS_NOQUOTA(inode)) { - inode_add_bytes(inode, number); - goto out_unlock; - } - - ret = __dquot_alloc_space(inode, number, warn, 0); - if (ret == NO_QUOTA) - goto out_unlock; - - /* Dirtify all the dquots - this can block when journalling */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (inode->i_dquot[cnt]) - mark_dquot_dirty(inode->i_dquot[cnt]); -out_unlock: - up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); -out: - return ret; + return __dquot_alloc_space(inode, number, warn, 0); } EXPORT_SYMBOL(dquot_alloc_space); int dquot_reserve_space(struct inode *inode, qsize_t number, int warn) { - int ret = QUOTA_OK; - - if (IS_NOQUOTA(inode)) - goto out; - - down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); - if (IS_NOQUOTA(inode)) - goto out_unlock; - - ret = __dquot_alloc_space(inode, number, warn, 1); -out_unlock: - up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); -out: - return ret; + return __dquot_alloc_space(inode, number, warn, 1); } EXPORT_SYMBOL(dquot_reserve_space); @@ -1455,10 +1518,7 @@ int dquot_alloc_inode(const struct inode *inode, qsize_t number) warn_put_all: spin_unlock(&dq_data_lock); if (ret == QUOTA_OK) - /* Dirtify all the dquots - this can block when journalling */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (inode->i_dquot[cnt]) - mark_dquot_dirty(inode->i_dquot[cnt]); + mark_all_dquot_dirty(inode->i_dquot); flush_warnings(inode->i_dquot, warntype); up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); return ret; @@ -1471,14 +1531,14 @@ int dquot_claim_space(struct inode *inode, qsize_t number) int ret = QUOTA_OK; if (IS_NOQUOTA(inode)) { - inode_add_bytes(inode, number); + inode_claim_rsv_space(inode, number); goto out; } down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); if (IS_NOQUOTA(inode)) { up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); - inode_add_bytes(inode, number); + inode_claim_rsv_space(inode, number); goto out; } @@ -1490,12 +1550,9 @@ int dquot_claim_space(struct inode *inode, qsize_t number) number); } /* Update inode bytes */ - inode_add_bytes(inode, number); + inode_claim_rsv_space(inode, number); spin_unlock(&dq_data_lock); - /* Dirtify all the dquots - this can block when journalling */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (inode->i_dquot[cnt]) - mark_dquot_dirty(inode->i_dquot[cnt]); + mark_all_dquot_dirty(inode->i_dquot); up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); out: return ret; @@ -1503,38 +1560,9 @@ out: EXPORT_SYMBOL(dquot_claim_space); /* - * Release reserved quota space - */ -void dquot_release_reserved_space(struct inode *inode, qsize_t number) -{ - int cnt; - - if (IS_NOQUOTA(inode)) - goto out; - - down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); - if (IS_NOQUOTA(inode)) - goto out_unlock; - - spin_lock(&dq_data_lock); - /* Release reserved dquots */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (inode->i_dquot[cnt]) - dquot_free_reserved_space(inode->i_dquot[cnt], number); - } - spin_unlock(&dq_data_lock); - -out_unlock: - up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); -out: - return; -} -EXPORT_SYMBOL(dquot_release_reserved_space); - -/* * This operation can block, but only after everything is updated */ -int dquot_free_space(struct inode *inode, qsize_t number) +int __dquot_free_space(struct inode *inode, qsize_t number, int reserve) { unsigned int cnt; char warntype[MAXQUOTAS]; @@ -1543,7 +1571,7 @@ int dquot_free_space(struct inode *inode, qsize_t number) * re-enter the quota code and are already holding the mutex */ if (IS_NOQUOTA(inode)) { out_sub: - inode_sub_bytes(inode, number); + inode_decr_space(inode, number, reserve); return QUOTA_OK; } @@ -1558,21 +1586,40 @@ out_sub: if (!inode->i_dquot[cnt]) continue; warntype[cnt] = info_bdq_free(inode->i_dquot[cnt], number); - dquot_decr_space(inode->i_dquot[cnt], number); + if (reserve) + dquot_free_reserved_space(inode->i_dquot[cnt], number); + else + dquot_decr_space(inode->i_dquot[cnt], number); } - inode_sub_bytes(inode, number); + inode_decr_space(inode, number, reserve); spin_unlock(&dq_data_lock); - /* Dirtify all the dquots - this can block when journalling */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (inode->i_dquot[cnt]) - mark_dquot_dirty(inode->i_dquot[cnt]); + + if (reserve) + goto out_unlock; + mark_all_dquot_dirty(inode->i_dquot); +out_unlock: flush_warnings(inode->i_dquot, warntype); up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); return QUOTA_OK; } + +int dquot_free_space(struct inode *inode, qsize_t number) +{ + return __dquot_free_space(inode, number, 0); +} EXPORT_SYMBOL(dquot_free_space); /* + * Release reserved quota space + */ +void dquot_release_reserved_space(struct inode *inode, qsize_t number) +{ + __dquot_free_space(inode, number, 1); + +} +EXPORT_SYMBOL(dquot_release_reserved_space); + +/* * This operation can block, but only after everything is updated */ int dquot_free_inode(const struct inode *inode, qsize_t number) @@ -1599,10 +1646,7 @@ int dquot_free_inode(const struct inode *inode, qsize_t number) dquot_decr_inodes(inode->i_dquot[cnt], number); } spin_unlock(&dq_data_lock); - /* Dirtify all the dquots - this can block when journalling */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (inode->i_dquot[cnt]) - mark_dquot_dirty(inode->i_dquot[cnt]); + mark_all_dquot_dirty(inode->i_dquot); flush_warnings(inode->i_dquot, warntype); up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); return QUOTA_OK; @@ -1610,19 +1654,6 @@ int dquot_free_inode(const struct inode *inode, qsize_t number) EXPORT_SYMBOL(dquot_free_inode); /* - * call back function, get reserved quota space from underlying fs - */ -qsize_t dquot_get_reserved_space(struct inode *inode) -{ - qsize_t reserved_space = 0; - - if (sb_any_quota_active(inode->i_sb) && - inode->i_sb->dq_op->get_reserved_space) - reserved_space = inode->i_sb->dq_op->get_reserved_space(inode); - return reserved_space; -} - -/* * Transfer the number of inode and blocks from one diskquota to an other. * * This operation can block, but only after everything is updated @@ -1665,7 +1696,7 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) } spin_lock(&dq_data_lock); cur_space = inode_get_bytes(inode); - rsv_space = dquot_get_reserved_space(inode); + rsv_space = inode_get_rsv_space(inode); space = cur_space + rsv_space; /* Build the transfer_from list and check the limits */ for (cnt = 0; cnt < MAXQUOTAS; cnt++) { @@ -1709,25 +1740,18 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) spin_unlock(&dq_data_lock); up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - /* Dirtify all the dquots - this can block when journalling */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (transfer_from[cnt]) - mark_dquot_dirty(transfer_from[cnt]); - if (transfer_to[cnt]) { - mark_dquot_dirty(transfer_to[cnt]); - /* The reference we got is transferred to the inode */ - transfer_to[cnt] = NULL; - } - } + mark_all_dquot_dirty(transfer_from); + mark_all_dquot_dirty(transfer_to); + /* The reference we got is transferred to the inode */ + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + transfer_to[cnt] = NULL; warn_put_all: flush_warnings(transfer_to, warntype_to); flush_warnings(transfer_from, warntype_from_inodes); flush_warnings(transfer_from, warntype_from_space); put_all: - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - dqput(transfer_from[cnt]); - dqput(transfer_to[cnt]); - } + dqput_all(transfer_from); + dqput_all(transfer_to); return ret; over_quota: spin_unlock(&dq_data_lock); diff --git a/fs/quota/quota_v2.c b/fs/quota/quota_v2.c index 3dfc23e0213..e3da02f4986 100644 --- a/fs/quota/quota_v2.c +++ b/fs/quota/quota_v2.c @@ -97,8 +97,11 @@ static int v2_read_file_info(struct super_block *sb, int type) unsigned int version; if (!v2_read_header(sb, type, &dqhead)) - return 0; + return -1; version = le32_to_cpu(dqhead.dqh_version); + if ((info->dqi_fmt_id == QFMT_VFS_V0 && version != 0) || + (info->dqi_fmt_id == QFMT_VFS_V1 && version != 1)) + return -1; size = sb->s_op->quota_read(sb, type, (char *)&dinfo, sizeof(struct v2_disk_dqinfo), V2_DQINFOOFF); @@ -120,8 +123,8 @@ static int v2_read_file_info(struct super_block *sb, int type) info->dqi_maxilimit = 0xffffffff; } else { /* used space is stored as unsigned 64-bit value */ - info->dqi_maxblimit = 0xffffffffffffffff; /* 2^64-1 */ - info->dqi_maxilimit = 0xffffffffffffffff; + info->dqi_maxblimit = 0xffffffffffffffffULL; /* 2^64-1 */ + info->dqi_maxilimit = 0xffffffffffffffffULL; } info->dqi_bgrace = le32_to_cpu(dinfo.dqi_bgrace); info->dqi_igrace = le32_to_cpu(dinfo.dqi_igrace); diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c index 68549570718..65c87276117 100644 --- a/fs/reiserfs/bitmap.c +++ b/fs/reiserfs/bitmap.c @@ -1277,7 +1277,10 @@ int reiserfs_init_bitmap_cache(struct super_block *sb) struct reiserfs_bitmap_info *bitmap; unsigned int bmap_nr = reiserfs_bmap_count(sb); + /* Avoid lock recursion in fault case */ + reiserfs_write_unlock(sb); bitmap = vmalloc(sizeof(*bitmap) * bmap_nr); + reiserfs_write_lock(sb); if (bitmap == NULL) return -ENOMEM; diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 290ae38fca8..1150ebb2536 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -31,11 +31,12 @@ void reiserfs_delete_inode(struct inode *inode) JOURNAL_PER_BALANCE_CNT * 2 + 2 * REISERFS_QUOTA_INIT_BLOCKS(inode->i_sb); struct reiserfs_transaction_handle th; + int depth; int err; truncate_inode_pages(&inode->i_data, 0); - reiserfs_write_lock(inode->i_sb); + depth = reiserfs_write_lock_once(inode->i_sb); /* The = 0 happens when we abort creating a new inode for some reason like lack of space.. */ if (!(inode->i_state & I_NEW) && INODE_PKEY(inode)->k_objectid != 0) { /* also handles bad_inode case */ @@ -74,7 +75,7 @@ void reiserfs_delete_inode(struct inode *inode) out: clear_inode(inode); /* note this must go after the journal_end to prevent deadlock */ inode->i_blocks = 0; - reiserfs_write_unlock(inode->i_sb); + reiserfs_write_unlock_once(inode->i_sb, depth); } static void _make_cpu_key(struct cpu_key *key, int version, __u32 dirid, diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index 2f8a7e7b8da..83ac4d3b3cb 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -2009,10 +2009,11 @@ static int do_journal_release(struct reiserfs_transaction_handle *th, destroy_workqueue(commit_wq); commit_wq = NULL; } - reiserfs_write_lock(sb); free_journal_ram(sb); + reiserfs_write_lock(sb); + return 0; } @@ -2758,11 +2759,18 @@ int journal_init(struct super_block *sb, const char *j_dev_name, struct reiserfs_journal *journal; struct reiserfs_journal_list *jl; char b[BDEVNAME_SIZE]; + int ret; + /* + * Unlock here to avoid various RECLAIM-FS-ON <-> IN-RECLAIM-FS + * dependency inversion warnings. + */ + reiserfs_write_unlock(sb); journal = SB_JOURNAL(sb) = vmalloc(sizeof(struct reiserfs_journal)); if (!journal) { reiserfs_warning(sb, "journal-1256", "unable to get memory for journal structure"); + reiserfs_write_lock(sb); return 1; } memset(journal, 0, sizeof(struct reiserfs_journal)); @@ -2771,10 +2779,12 @@ int journal_init(struct super_block *sb, const char *j_dev_name, INIT_LIST_HEAD(&journal->j_working_list); INIT_LIST_HEAD(&journal->j_journal_list); journal->j_persistent_trans = 0; - if (reiserfs_allocate_list_bitmaps(sb, - journal->j_list_bitmap, - reiserfs_bmap_count(sb))) + ret = reiserfs_allocate_list_bitmaps(sb, journal->j_list_bitmap, + reiserfs_bmap_count(sb)); + reiserfs_write_lock(sb); + if (ret) goto free_and_return; + allocate_bitmap_nodes(sb); /* reserved for journal area support */ diff --git a/fs/reiserfs/lock.c b/fs/reiserfs/lock.c index ee2cfc0fd8a..b87aa2c1afc 100644 --- a/fs/reiserfs/lock.c +++ b/fs/reiserfs/lock.c @@ -86,3 +86,12 @@ void reiserfs_check_lock_depth(struct super_block *sb, char *caller) reiserfs_panic(sb, "%s called without kernel lock held %d", caller); } + +#ifdef CONFIG_REISERFS_CHECK +void reiserfs_lock_check_recursive(struct super_block *sb) +{ + struct reiserfs_sb_info *sb_i = REISERFS_SB(sb); + + WARN_ONCE((sb_i->lock_depth > 0), "Unwanted recursive reiserfs lock!\n"); +} +#endif diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c index e296ff72a6c..9d4dcf0b07c 100644 --- a/fs/reiserfs/namei.c +++ b/fs/reiserfs/namei.c @@ -921,6 +921,7 @@ static int reiserfs_unlink(struct inode *dir, struct dentry *dentry) struct reiserfs_transaction_handle th; int jbegin_count; unsigned long savelink; + int depth; inode = dentry->d_inode; @@ -932,7 +933,7 @@ static int reiserfs_unlink(struct inode *dir, struct dentry *dentry) JOURNAL_PER_BALANCE_CNT * 2 + 2 + 4 * REISERFS_QUOTA_TRANS_BLOCKS(dir->i_sb); - reiserfs_write_lock(dir->i_sb); + depth = reiserfs_write_lock_once(dir->i_sb); retval = journal_begin(&th, dir->i_sb, jbegin_count); if (retval) goto out_unlink; @@ -993,7 +994,7 @@ static int reiserfs_unlink(struct inode *dir, struct dentry *dentry) retval = journal_end(&th, dir->i_sb, jbegin_count); reiserfs_check_path(&path); - reiserfs_write_unlock(dir->i_sb); + reiserfs_write_unlock_once(dir->i_sb, depth); return retval; end_unlink: @@ -1003,7 +1004,7 @@ static int reiserfs_unlink(struct inode *dir, struct dentry *dentry) if (err) retval = err; out_unlink: - reiserfs_write_unlock(dir->i_sb); + reiserfs_write_unlock_once(dir->i_sb, depth); return retval; } diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 8c7033a8b67..c3b004ee627 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -83,7 +83,8 @@ static int xattr_unlink(struct inode *dir, struct dentry *dentry) BUG_ON(!mutex_is_locked(&dir->i_mutex)); vfs_dq_init(dir); - mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD); + reiserfs_mutex_lock_nested_safe(&dentry->d_inode->i_mutex, + I_MUTEX_CHILD, dir->i_sb); error = dir->i_op->unlink(dir, dentry); mutex_unlock(&dentry->d_inode->i_mutex); @@ -98,7 +99,8 @@ static int xattr_rmdir(struct inode *dir, struct dentry *dentry) BUG_ON(!mutex_is_locked(&dir->i_mutex)); vfs_dq_init(dir); - mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD); + reiserfs_mutex_lock_nested_safe(&dentry->d_inode->i_mutex, + I_MUTEX_CHILD, dir->i_sb); dentry_unhash(dentry); error = dir->i_op->rmdir(dir, dentry); if (!error) @@ -235,16 +237,22 @@ static int reiserfs_for_each_xattr(struct inode *inode, if (IS_PRIVATE(inode) || get_inode_sd_version(inode) == STAT_DATA_V1) return 0; + reiserfs_write_unlock(inode->i_sb); dir = open_xa_dir(inode, XATTR_REPLACE); if (IS_ERR(dir)) { err = PTR_ERR(dir); + reiserfs_write_lock(inode->i_sb); goto out; } else if (!dir->d_inode) { err = 0; + reiserfs_write_lock(inode->i_sb); goto out_dir; } mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_XATTR); + + reiserfs_write_lock(inode->i_sb); + buf.xadir = dir; err = reiserfs_readdir_dentry(dir, &buf, fill_with_dentries, &pos); while ((err == 0 || err == -ENOSPC) && buf.count) { @@ -283,8 +291,9 @@ static int reiserfs_for_each_xattr(struct inode *inode, err = journal_begin(&th, inode->i_sb, blocks); if (!err) { int jerror; - mutex_lock_nested(&dir->d_parent->d_inode->i_mutex, - I_MUTEX_XATTR); + reiserfs_mutex_lock_nested_safe( + &dir->d_parent->d_inode->i_mutex, + I_MUTEX_XATTR, inode->i_sb); err = action(dir, data); jerror = journal_end(&th, inode->i_sb, blocks); mutex_unlock(&dir->d_parent->d_inode->i_mutex); @@ -480,11 +489,16 @@ reiserfs_xattr_set_handle(struct reiserfs_transaction_handle *th, if (!buffer) return lookup_and_delete_xattr(inode, name); + reiserfs_write_unlock(inode->i_sb); dentry = xattr_lookup(inode, name, flags); - if (IS_ERR(dentry)) + if (IS_ERR(dentry)) { + reiserfs_write_lock(inode->i_sb); return PTR_ERR(dentry); + } - down_write(&REISERFS_I(inode)->i_xattr_sem); + down_read(&REISERFS_I(inode)->i_xattr_sem); + + reiserfs_write_lock(inode->i_sb); xahash = xattr_hash(buffer, buffer_size); while (buffer_pos < buffer_size || buffer_pos == 0) { diff --git a/fs/stat.c b/fs/stat.c index 075694e31d8..c4ecd52c573 100644 --- a/fs/stat.c +++ b/fs/stat.c @@ -401,9 +401,9 @@ SYSCALL_DEFINE4(fstatat64, int, dfd, char __user *, filename, } #endif /* __ARCH_WANT_STAT64 */ -void inode_add_bytes(struct inode *inode, loff_t bytes) +/* Caller is here responsible for sufficient locking (ie. inode->i_lock) */ +void __inode_add_bytes(struct inode *inode, loff_t bytes) { - spin_lock(&inode->i_lock); inode->i_blocks += bytes >> 9; bytes &= 511; inode->i_bytes += bytes; @@ -411,6 +411,12 @@ void inode_add_bytes(struct inode *inode, loff_t bytes) inode->i_blocks++; inode->i_bytes -= 512; } +} + +void inode_add_bytes(struct inode *inode, loff_t bytes) +{ + spin_lock(&inode->i_lock); + __inode_add_bytes(inode, bytes); spin_unlock(&inode->i_lock); } diff --git a/fs/super.c b/fs/super.c index 19eb70b374b..aff046b0fe7 100644 --- a/fs/super.c +++ b/fs/super.c @@ -901,8 +901,9 @@ int get_sb_single(struct file_system_type *fs_type, return error; } s->s_flags |= MS_ACTIVE; + } else { + do_remount_sb(s, flags, data, 0); } - do_remount_sb(s, flags, data, 0); simple_set_mnt(mnt, s); return 0; } diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c index 60c702bc10a..a0a500af24a 100644 --- a/fs/sysfs/bin.c +++ b/fs/sysfs/bin.c @@ -483,7 +483,8 @@ void unmap_bin_file(struct sysfs_dirent *attr_sd) * @attr: attribute descriptor. */ -int sysfs_create_bin_file(struct kobject * kobj, struct bin_attribute * attr) +int sysfs_create_bin_file(struct kobject *kobj, + const struct bin_attribute *attr) { BUG_ON(!kobj || !kobj->sd || !attr); @@ -497,7 +498,8 @@ int sysfs_create_bin_file(struct kobject * kobj, struct bin_attribute * attr) * @attr: attribute descriptor. */ -void sysfs_remove_bin_file(struct kobject * kobj, struct bin_attribute * attr) +void sysfs_remove_bin_file(struct kobject *kobj, + const struct bin_attribute *attr) { sysfs_hash_and_remove(kobj->sd, attr->attr.name); } diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 29245c6b5c0..0ea5ef4eb6a 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -224,8 +224,6 @@ struct acpi_processor { struct acpi_processor_throttling throttling; struct acpi_processor_limit limit; struct thermal_cooling_device *cdev; - /* the _PDC objects for this processor, if any */ - struct acpi_object_list *pdc; }; struct acpi_processor_errata { @@ -257,9 +255,6 @@ int acpi_processor_notify_smm(struct module *calling_module); DECLARE_PER_CPU(struct acpi_processor *, processors); extern struct acpi_processor_errata errata; -void arch_acpi_processor_init_pdc(struct acpi_processor *pr); -void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr); - #ifdef ARCH_HAS_POWER_INIT void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, unsigned int cpu); @@ -325,6 +320,9 @@ static inline int acpi_processor_get_bios_limit(int cpu, unsigned int *limit) #endif /* CONFIG_CPU_FREQ */ +/* in processor_pdc.c */ +void acpi_processor_set_pdc(acpi_handle handle); + /* in processor_throttling.c */ int acpi_processor_tstate_has_changed(struct acpi_processor *pr); int acpi_processor_get_throttling_info(struct acpi_processor *pr); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 19ef8ebdc66..71dafb69cfe 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -296,6 +296,7 @@ typedef int drm_ioctl_compat_t(struct file *filp, unsigned int cmd, #define DRM_MASTER 0x2 #define DRM_ROOT_ONLY 0x4 #define DRM_CONTROL_ALLOW 0x8 +#define DRM_UNLOCKED 0x10 struct drm_ioctl_desc { unsigned int cmd; @@ -1128,8 +1129,8 @@ static inline int drm_mtrr_del(int handle, unsigned long offset, /* Driver support (drm_drv.h) */ extern int drm_init(struct drm_driver *driver); extern void drm_exit(struct drm_driver *driver); -extern int drm_ioctl(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); +extern long drm_ioctl(struct file *filp, + unsigned int cmd, unsigned long arg); extern long drm_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); extern int drm_lastclose(struct drm_device *dev); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index ce945d4845f..36924255c0d 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -251,6 +251,7 @@ int acpi_check_mem_region(resource_size_t start, resource_size_t n, void __init acpi_no_s4_hw_signature(void); void __init acpi_old_suspend_ordering(void); void __init acpi_s4_no_nvs(void); +void __init acpi_set_sci_en_on_resume(void); #endif /* CONFIG_PM_SLEEP */ struct acpi_osc_context { diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 784a919aa0d..9b98173a818 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -845,7 +845,6 @@ static inline struct request_queue *bdev_get_queue(struct block_device *bdev) * blk_rq_err_bytes() : bytes left till the next error boundary * blk_rq_sectors() : sectors left in the entire request * blk_rq_cur_sectors() : sectors left in the current segment - * blk_rq_err_sectors() : sectors left till the next error boundary */ static inline sector_t blk_rq_pos(const struct request *rq) { @@ -874,11 +873,6 @@ static inline unsigned int blk_rq_cur_sectors(const struct request *rq) return blk_rq_cur_bytes(rq) >> 9; } -static inline unsigned int blk_rq_err_sectors(const struct request *rq) -{ - return blk_rq_err_bytes(rq) >> 9; -} - /* * Request issue related functions. */ @@ -1116,11 +1110,18 @@ static inline int queue_alignment_offset(struct request_queue *q) return q->limits.alignment_offset; } +static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t offset) +{ + unsigned int granularity = max(lim->physical_block_size, lim->io_min); + + offset &= granularity - 1; + return (granularity + lim->alignment_offset - offset) & (granularity - 1); +} + static inline int queue_sector_alignment_offset(struct request_queue *q, sector_t sector) { - return ((sector << 9) - q->limits.alignment_offset) - & (q->limits.io_min - 1); + return queue_limit_alignment_offset(&q->limits, sector << 9); } static inline int bdev_alignment_offset(struct block_device *bdev) diff --git a/include/linux/device.h b/include/linux/device.h index 2a73d9bcbc9..a62799f2ab0 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -166,9 +166,9 @@ struct driver_attribute driver_attr_##_name = \ __ATTR(_name, _mode, _show, _store) extern int __must_check driver_create_file(struct device_driver *driver, - struct driver_attribute *attr); + const struct driver_attribute *attr); extern void driver_remove_file(struct device_driver *driver, - struct driver_attribute *attr); + const struct driver_attribute *attr); extern int __must_check driver_add_kobj(struct device_driver *drv, struct kobject *kobj, @@ -319,13 +319,13 @@ struct device_attribute { struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store) extern int __must_check device_create_file(struct device *device, - struct device_attribute *entry); + const struct device_attribute *entry); extern void device_remove_file(struct device *dev, - struct device_attribute *attr); + const struct device_attribute *attr); extern int __must_check device_create_bin_file(struct device *dev, - struct bin_attribute *attr); + const struct bin_attribute *attr); extern void device_remove_bin_file(struct device *dev, - struct bin_attribute *attr); + const struct bin_attribute *attr); extern int device_schedule_callback_owner(struct device *dev, void (*func)(struct device *dev), struct module *owner); diff --git a/include/linux/dst.h b/include/linux/dst.h deleted file mode 100644 index e26fed84b1a..00000000000 --- a/include/linux/dst.h +++ /dev/null @@ -1,587 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __DST_H -#define __DST_H - -#include <linux/types.h> -#include <linux/connector.h> - -#define DST_NAMELEN 32 -#define DST_NAME "dst" - -enum { - /* Remove node with given id from storage */ - DST_DEL_NODE = 0, - /* Add remote node with given id to the storage */ - DST_ADD_REMOTE, - /* Add local node with given id to the storage to be exported and used by remote peers */ - DST_ADD_EXPORT, - /* Crypto initialization command (hash/cipher used to protect the connection) */ - DST_CRYPTO, - /* Security attributes for given connection (permissions for example) */ - DST_SECURITY, - /* Register given node in the block layer subsystem */ - DST_START, - DST_CMD_MAX -}; - -struct dst_ctl -{ - /* Storage name */ - char name[DST_NAMELEN]; - /* Command flags */ - __u32 flags; - /* Command itself (see above) */ - __u32 cmd; - /* Maximum number of pages per single request in this device */ - __u32 max_pages; - /* Stale/error transaction scanning timeout in milliseconds */ - __u32 trans_scan_timeout; - /* Maximum number of retry sends before completing transaction as broken */ - __u32 trans_max_retries; - /* Storage size */ - __u64 size; -}; - -/* Reply command carries completion status */ -struct dst_ctl_ack -{ - struct cn_msg msg; - int error; - int unused[3]; -}; - -/* - * Unfortunaltely socket address structure is not exported to userspace - * and is redefined there. - */ -#define SADDR_MAX_DATA 128 - -struct saddr { - /* address family, AF_xxx */ - unsigned short sa_family; - /* 14 bytes of protocol address */ - char sa_data[SADDR_MAX_DATA]; - /* Number of bytes used in sa_data */ - unsigned short sa_data_len; -}; - -/* Address structure */ -struct dst_network_ctl -{ - /* Socket type: datagram, stream...*/ - unsigned int type; - /* Let me guess, is it a Jupiter diameter? */ - unsigned int proto; - /* Peer's address */ - struct saddr addr; -}; - -struct dst_crypto_ctl -{ - /* Cipher and hash names */ - char cipher_algo[DST_NAMELEN]; - char hash_algo[DST_NAMELEN]; - - /* Key sizes. Can be zero for digest for example */ - unsigned int cipher_keysize, hash_keysize; - /* Alignment. Calculated by the DST itself. */ - unsigned int crypto_attached_size; - /* Number of threads to perform crypto operations */ - int thread_num; -}; - -/* Export security attributes have this bits checked in when client connects */ -#define DST_PERM_READ (1<<0) -#define DST_PERM_WRITE (1<<1) - -/* - * Right now it is simple model, where each remote address - * is assigned to set of permissions it is allowed to perform. - * In real world block device does not know anything but - * reading and writing, so it should be more than enough. - */ -struct dst_secure_user -{ - unsigned int permissions; - struct saddr addr; -}; - -/* - * Export control command: device to export and network address to accept - * clients to work with given device - */ -struct dst_export_ctl -{ - char device[DST_NAMELEN]; - struct dst_network_ctl ctl; -}; - -enum { - DST_CFG = 1, /* Request remote configuration */ - DST_IO, /* IO command */ - DST_IO_RESPONSE, /* IO response */ - DST_PING, /* Keepalive message */ - DST_NCMD_MAX, -}; - -struct dst_cmd -{ - /* Network command itself, see above */ - __u32 cmd; - /* - * Size of the attached data - * (in most cases, for READ command it means how many bytes were requested) - */ - __u32 size; - /* Crypto size: number of attached bytes with digest/hmac */ - __u32 csize; - /* Here we can carry secret data */ - __u32 reserved; - /* Read/write bits, see how they are encoded in bio structure */ - __u64 rw; - /* BIO flags */ - __u64 flags; - /* Unique command id (like transaction ID) */ - __u64 id; - /* Sector to start IO from */ - __u64 sector; - /* Hash data is placed after this header */ - __u8 hash[0]; -}; - -/* - * Convert command to/from network byte order. - * We do not use hton*() functions, since there is - * no 64-bit implementation. - */ -static inline void dst_convert_cmd(struct dst_cmd *c) -{ - c->cmd = __cpu_to_be32(c->cmd); - c->csize = __cpu_to_be32(c->csize); - c->size = __cpu_to_be32(c->size); - c->sector = __cpu_to_be64(c->sector); - c->id = __cpu_to_be64(c->id); - c->flags = __cpu_to_be64(c->flags); - c->rw = __cpu_to_be64(c->rw); -} - -/* Transaction id */ -typedef __u64 dst_gen_t; - -#ifdef __KERNEL__ - -#include <linux/blkdev.h> -#include <linux/bio.h> -#include <linux/device.h> -#include <linux/mempool.h> -#include <linux/net.h> -#include <linux/poll.h> -#include <linux/rbtree.h> - -#ifdef CONFIG_DST_DEBUG -#define dprintk(f, a...) printk(KERN_NOTICE f, ##a) -#else -static inline void __attribute__ ((format (printf, 1, 2))) - dprintk(const char *fmt, ...) {} -#endif - -struct dst_node; - -struct dst_trans -{ - /* DST node we are working with */ - struct dst_node *n; - - /* Entry inside transaction tree */ - struct rb_node trans_entry; - - /* Merlin kills this transaction when this memory cell equals zero */ - atomic_t refcnt; - - /* How this transaction should be processed by crypto engine */ - short enc; - /* How many times this transaction was resent */ - short retries; - /* Completion status */ - int error; - - /* When did we send it to the remote peer */ - long send_time; - - /* My name is... - * Well, computers does not speak, they have unique id instead */ - dst_gen_t gen; - - /* Block IO we are working with */ - struct bio *bio; - - /* Network command for above block IO request */ - struct dst_cmd cmd; -}; - -struct dst_crypto_engine -{ - /* What should we do with all block requests */ - struct crypto_hash *hash; - struct crypto_ablkcipher *cipher; - - /* Pool of pages used to encrypt data into before sending */ - int page_num; - struct page **pages; - - /* What to do with current request */ - int enc; - /* Who we are and where do we go */ - struct scatterlist *src, *dst; - - /* Maximum timeout waiting for encryption to be completed */ - long timeout; - /* IV is a 64-bit sequential counter */ - u64 iv; - - /* Secret data */ - void *private; - - /* Cached temporary data lives here */ - int size; - void *data; -}; - -struct dst_state -{ - /* The main state protection */ - struct mutex state_lock; - - /* Polling machinery for sockets */ - wait_queue_t wait; - wait_queue_head_t *whead; - /* Most of events are being waited here */ - wait_queue_head_t thread_wait; - - /* Who owns this? */ - struct dst_node *node; - - /* Network address for this state */ - struct dst_network_ctl ctl; - - /* Permissions to work with: read-only or rw connection */ - u32 permissions; - - /* Called when we need to clean private data */ - void (* cleanup)(struct dst_state *st); - - /* Used by the server: BIO completion queues BIOs here */ - struct list_head request_list; - spinlock_t request_lock; - - /* Guess what? No, it is not number of planets */ - atomic_t refcnt; - - /* This flags is set when connection should be dropped */ - int need_exit; - - /* - * Socket to work with. Second pointer is used for - * lockless check if socket was changed before performing - * next action (like working with cached polling result) - */ - struct socket *socket, *read_socket; - - /* Cached preallocated data */ - void *data; - unsigned int size; - - /* Currently processed command */ - struct dst_cmd cmd; -}; - -struct dst_info -{ - /* Device size */ - u64 size; - - /* Local device name for export devices */ - char local[DST_NAMELEN]; - - /* Network setup */ - struct dst_network_ctl net; - - /* Sysfs bits use this */ - struct device device; -}; - -struct dst_node -{ - struct list_head node_entry; - - /* Hi, my name is stored here */ - char name[DST_NAMELEN]; - /* My cache name is stored here */ - char cache_name[DST_NAMELEN]; - - /* Block device attached to given node. - * Only valid for exporting nodes */ - struct block_device *bdev; - /* Network state machine for given peer */ - struct dst_state *state; - - /* Block IO machinery */ - struct request_queue *queue; - struct gendisk *disk; - - /* Number of threads in processing pool */ - int thread_num; - /* Maximum number of pages in single IO */ - int max_pages; - - /* I'm that big in bytes */ - loff_t size; - - /* Exported to userspace node information */ - struct dst_info *info; - - /* - * Security attribute list. - * Used only by exporting node currently. - */ - struct list_head security_list; - struct mutex security_lock; - - /* - * When this unerflows below zero, university collapses. - * But this will not happen, since node will be freed, - * when reference counter reaches zero. - */ - atomic_t refcnt; - - /* How precisely should I be started? */ - int (*start)(struct dst_node *); - - /* Crypto capabilities */ - struct dst_crypto_ctl crypto; - u8 *hash_key; - u8 *cipher_key; - - /* Pool of processing thread */ - struct thread_pool *pool; - - /* Transaction IDs live here */ - atomic_long_t gen; - - /* - * How frequently and how many times transaction - * tree should be scanned to drop stale objects. - */ - long trans_scan_timeout; - int trans_max_retries; - - /* Small gnomes live here */ - struct rb_root trans_root; - struct mutex trans_lock; - - /* - * Transaction cache/memory pool. - * It is big enough to contain not only transaction - * itself, but additional crypto data (digest/hmac). - */ - struct kmem_cache *trans_cache; - mempool_t *trans_pool; - - /* This entity scans transaction tree */ - struct delayed_work trans_work; - - wait_queue_head_t wait; -}; - -/* Kernel representation of the security attribute */ -struct dst_secure -{ - struct list_head sec_entry; - struct dst_secure_user sec; -}; - -int dst_process_bio(struct dst_node *n, struct bio *bio); - -int dst_node_init_connected(struct dst_node *n, struct dst_network_ctl *r); -int dst_node_init_listened(struct dst_node *n, struct dst_export_ctl *le); - -static inline struct dst_state *dst_state_get(struct dst_state *st) -{ - BUG_ON(atomic_read(&st->refcnt) == 0); - atomic_inc(&st->refcnt); - return st; -} - -void dst_state_put(struct dst_state *st); - -struct dst_state *dst_state_alloc(struct dst_node *n); -int dst_state_socket_create(struct dst_state *st); -void dst_state_socket_release(struct dst_state *st); - -void dst_state_exit_connected(struct dst_state *st); - -int dst_state_schedule_receiver(struct dst_state *st); - -void dst_dump_addr(struct socket *sk, struct sockaddr *sa, char *str); - -static inline void dst_state_lock(struct dst_state *st) -{ - mutex_lock(&st->state_lock); -} - -static inline void dst_state_unlock(struct dst_state *st) -{ - mutex_unlock(&st->state_lock); -} - -void dst_poll_exit(struct dst_state *st); -int dst_poll_init(struct dst_state *st); - -static inline unsigned int dst_state_poll(struct dst_state *st) -{ - unsigned int revents = POLLHUP | POLLERR; - - dst_state_lock(st); - if (st->socket) - revents = st->socket->ops->poll(NULL, st->socket, NULL); - dst_state_unlock(st); - - return revents; -} - -static inline int dst_thread_setup(void *private, void *data) -{ - return 0; -} - -void dst_node_put(struct dst_node *n); - -static inline struct dst_node *dst_node_get(struct dst_node *n) -{ - atomic_inc(&n->refcnt); - return n; -} - -int dst_data_recv(struct dst_state *st, void *data, unsigned int size); -int dst_recv_cdata(struct dst_state *st, void *cdata); -int dst_data_send_header(struct socket *sock, - void *data, unsigned int size, int more); - -int dst_send_bio(struct dst_state *st, struct dst_cmd *cmd, struct bio *bio); - -int dst_process_io(struct dst_state *st); -int dst_export_crypto(struct dst_node *n, struct bio *bio); -int dst_export_send_bio(struct bio *bio); -int dst_start_export(struct dst_node *n); - -int __init dst_export_init(void); -void dst_export_exit(void); - -/* Private structure for export block IO requests */ -struct dst_export_priv -{ - struct list_head request_entry; - struct dst_state *state; - struct bio *bio; - struct dst_cmd cmd; -}; - -static inline void dst_trans_get(struct dst_trans *t) -{ - atomic_inc(&t->refcnt); -} - -struct dst_trans *dst_trans_search(struct dst_node *node, dst_gen_t gen); -int dst_trans_remove(struct dst_trans *t); -int dst_trans_remove_nolock(struct dst_trans *t); -void dst_trans_put(struct dst_trans *t); - -/* - * Convert bio into network command. - */ -static inline void dst_bio_to_cmd(struct bio *bio, struct dst_cmd *cmd, - u32 command, u64 id) -{ - cmd->cmd = command; - cmd->flags = (bio->bi_flags << BIO_POOL_BITS) >> BIO_POOL_BITS; - cmd->rw = bio->bi_rw; - cmd->size = bio->bi_size; - cmd->csize = 0; - cmd->id = id; - cmd->sector = bio->bi_sector; -}; - -int dst_trans_send(struct dst_trans *t); -int dst_trans_crypto(struct dst_trans *t); - -int dst_node_crypto_init(struct dst_node *n, struct dst_crypto_ctl *ctl); -void dst_node_crypto_exit(struct dst_node *n); - -static inline int dst_need_crypto(struct dst_node *n) -{ - struct dst_crypto_ctl *c = &n->crypto; - /* - * Logical OR is appropriate here, but boolean one produces - * more optimal code, so it is used instead. - */ - return (c->hash_algo[0] | c->cipher_algo[0]); -} - -int dst_node_trans_init(struct dst_node *n, unsigned int size); -void dst_node_trans_exit(struct dst_node *n); - -/* - * Pool of threads. - * Ready list contains threads currently free to be used, - * active one contains threads with some work scheduled for them. - * Caller can wait in given queue when thread is ready. - */ -struct thread_pool -{ - int thread_num; - struct mutex thread_lock; - struct list_head ready_list, active_list; - - wait_queue_head_t wait; -}; - -void thread_pool_del_worker(struct thread_pool *p); -void thread_pool_del_worker_id(struct thread_pool *p, unsigned int id); -int thread_pool_add_worker(struct thread_pool *p, - char *name, - unsigned int id, - void *(* init)(void *data), - void (* cleanup)(void *data), - void *data); - -void thread_pool_destroy(struct thread_pool *p); -struct thread_pool *thread_pool_create(int num, char *name, - void *(* init)(void *data), - void (* cleanup)(void *data), - void *data); - -int thread_pool_schedule(struct thread_pool *p, - int (* setup)(void *stored_private, void *setup_data), - int (* action)(void *stored_private, void *setup_data), - void *setup_data, long timeout); -int thread_pool_schedule_private(struct thread_pool *p, - int (* setup)(void *private, void *data), - int (* action)(void *private, void *data), - void *data, long timeout, void *id); - -#endif /* __KERNEL__ */ -#endif /* __DST_H */ diff --git a/include/linux/ext3_fs_sb.h b/include/linux/ext3_fs_sb.h index f07f34de2f0..258088ab3c6 100644 --- a/include/linux/ext3_fs_sb.h +++ b/include/linux/ext3_fs_sb.h @@ -72,6 +72,8 @@ struct ext3_sb_info { struct inode * s_journal_inode; struct journal_s * s_journal; struct list_head s_orphan; + struct mutex s_orphan_lock; + struct mutex s_resize_lock; unsigned long s_commit_interval; struct block_device *journal_bdev; #ifdef CONFIG_JBD_DEBUG diff --git a/include/linux/ext3_jbd.h b/include/linux/ext3_jbd.h index cf82d519be4..d7b5ddca99c 100644 --- a/include/linux/ext3_jbd.h +++ b/include/linux/ext3_jbd.h @@ -44,13 +44,13 @@ #define EXT3_DATA_TRANS_BLOCKS(sb) (EXT3_SINGLEDATA_TRANS_BLOCKS + \ EXT3_XATTR_TRANS_BLOCKS - 2 + \ - 2*EXT3_QUOTA_TRANS_BLOCKS(sb)) + EXT3_MAXQUOTAS_TRANS_BLOCKS(sb)) /* Delete operations potentially hit one directory's namespace plus an * entire inode, plus arbitrary amounts of bitmap/indirection data. Be * generous. We can grow the delete transaction later if necessary. */ -#define EXT3_DELETE_TRANS_BLOCKS(sb) (2 * EXT3_DATA_TRANS_BLOCKS(sb) + 64) +#define EXT3_DELETE_TRANS_BLOCKS(sb) (EXT3_MAXQUOTAS_TRANS_BLOCKS(sb) + 64) /* Define an arbitrary limit for the amount of data we will anticipate * writing to any given transaction. For unbounded transactions such as @@ -86,6 +86,9 @@ #define EXT3_QUOTA_INIT_BLOCKS(sb) 0 #define EXT3_QUOTA_DEL_BLOCKS(sb) 0 #endif +#define EXT3_MAXQUOTAS_TRANS_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_TRANS_BLOCKS(sb)) +#define EXT3_MAXQUOTAS_INIT_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_INIT_BLOCKS(sb)) +#define EXT3_MAXQUOTAS_DEL_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_DEL_BLOCKS(sb)) int ext3_mark_iloc_dirty(handle_t *handle, diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h index 934e22d6580..d830747f5c0 100644 --- a/include/linux/fiemap.h +++ b/include/linux/fiemap.h @@ -62,5 +62,7 @@ struct fiemap { #define FIEMAP_EXTENT_MERGED 0x00001000 /* File does not natively * support extents. Result * merged for efficiency. */ +#define FIEMAP_EXTENT_SHARED 0x00002000 /* Space shared with other + * files. */ #endif /* _LINUX_FIEMAP_H */ diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h index c6b3ca3af6d..1f716d9f714 100644 --- a/include/linux/firewire-cdev.h +++ b/include/linux/firewire-cdev.h @@ -340,6 +340,9 @@ struct fw_cdev_send_response { * The @closure field is passed back to userspace in the response event. * The @handle field is an out parameter, returning a handle to the allocated * range to be used for later deallocation of the range. + * + * The address range is allocated on all local nodes. The address allocation + * is exclusive except for the FCP command and response registers. */ struct fw_cdev_allocate { __u64 offset; diff --git a/include/linux/firewire.h b/include/linux/firewire.h index 9416a461b69..a0e67150a72 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -248,8 +248,8 @@ typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode, void *data, size_t length, void *callback_data); /* - * Important note: The callback must guarantee that either fw_send_response() - * or kfree() is called on the @request. + * Important note: Except for the FCP registers, the callback must guarantee + * that either fw_send_response() or kfree() is called on the @request. */ typedef void (*fw_address_callback_t)(struct fw_card *card, struct fw_request *request, diff --git a/include/linux/fs.h b/include/linux/fs.h index 7e3012e0ac0..9147ca88f25 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2297,6 +2297,7 @@ extern const struct inode_operations page_symlink_inode_operations; extern int generic_readlink(struct dentry *, char __user *, int); extern void generic_fillattr(struct inode *, struct kstat *); extern int vfs_getattr(struct vfsmount *, struct dentry *, struct kstat *); +void __inode_add_bytes(struct inode *inode, loff_t bytes); void inode_add_bytes(struct inode *inode, loff_t bytes); void inode_sub_bytes(struct inode *inode, loff_t bytes); loff_t inode_get_bytes(struct inode *inode); diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index d9724a28c0c..163c840437d 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -832,7 +832,7 @@ struct ieee80211_ht_cap { #define IEEE80211_HT_CAP_DELAY_BA 0x0400 #define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 #define IEEE80211_HT_CAP_DSSSCCK40 0x1000 -#define IEEE80211_HT_CAP_PSMP_SUPPORT 0x2000 +#define IEEE80211_HT_CAP_RESERVED 0x2000 #define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000 #define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000 diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index 699e85c01a4..b2304929434 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -81,6 +81,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev) #define IN_DEV_FORWARD(in_dev) IN_DEV_CONF_GET((in_dev), FORWARDING) #define IN_DEV_MFORWARD(in_dev) IN_DEV_ANDCONF((in_dev), MC_FORWARDING) #define IN_DEV_RPFILTER(in_dev) IN_DEV_MAXCONF((in_dev), RP_FILTER) +#define IN_DEV_SRC_VMARK(in_dev) IN_DEV_ORCONF((in_dev), SRC_VMARK) #define IN_DEV_SOURCE_ROUTE(in_dev) IN_DEV_ANDCONF((in_dev), \ ACCEPT_SOURCE_ROUTE) #define IN_DEV_ACCEPT_LOCAL(in_dev) IN_DEV_ORCONF((in_dev), ACCEPT_LOCAL) diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index f1011f7f3d4..638ce4554c7 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -653,6 +653,7 @@ struct transaction_s * waiting for it to finish. */ unsigned int t_synchronous_commit:1; + unsigned int t_flushed_data_blocks:1; /* * For use by the filesystem to store fs-specific data diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 486e8ad3bb5..7c6b32a1421 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -69,8 +69,8 @@ struct kfifo { * @name: name of the declared kfifo datatype * @size: size of the fifo buffer * - * Note: the macro can be used inside struct or union declaration - * Note: the macro creates two objects: + * Note1: the macro can be used inside struct or union declaration + * Note2: the macro creates two objects: * A kfifo object with the given name and a buffer for the kfifo * object named name##kfifo_buffer */ @@ -81,9 +81,8 @@ union { \ } /** - * INIT_KFIFO - Initialize a kfifo declared by DECLARED_KFIFO + * INIT_KFIFO - Initialize a kfifo declared by DECLARE_KFIFO * @name: name of the declared kfifo datatype - * @size: size of the fifo buffer */ #define INIT_KFIFO(name) \ name = __kfifo_initializer(sizeof(name##kfifo_buffer) - \ @@ -94,8 +93,8 @@ union { \ * @name: name of the declared kfifo datatype * @size: size of the fifo buffer * - * Note: the macro can be used for global and local kfifo data type variables - * Note: the macro creates two objects: + * Note1: the macro can be used for global and local kfifo data type variables + * Note2: the macro creates two objects: * A kfifo object with the given name and a buffer for the kfifo * object named name##kfifo_buffer */ @@ -249,7 +248,7 @@ extern __must_check unsigned int kfifo_from_user(struct kfifo *fifo, extern __must_check unsigned int kfifo_to_user(struct kfifo *fifo, void __user *to, unsigned int n); -/** +/* * __kfifo_add_out internal helper function for updating the out offset */ static inline void __kfifo_add_out(struct kfifo *fifo, @@ -259,7 +258,7 @@ static inline void __kfifo_add_out(struct kfifo *fifo, fifo->out += off; } -/** +/* * __kfifo_add_in internal helper function for updating the in offset */ static inline void __kfifo_add_in(struct kfifo *fifo, @@ -269,7 +268,7 @@ static inline void __kfifo_add_in(struct kfifo *fifo, fifo->in += off; } -/** +/* * __kfifo_off internal helper function for calculating the index of a * given offeset */ @@ -278,7 +277,7 @@ static inline unsigned int __kfifo_off(struct kfifo *fifo, unsigned int off) return off & (fifo->size - 1); } -/** +/* * __kfifo_peek_n internal helper function for determinate the length of * the next record in the fifo */ @@ -299,7 +298,7 @@ static inline unsigned int __kfifo_peek_n(struct kfifo *fifo, #undef __KFIFO_GET } -/** +/* * __kfifo_poke_n internal helper function for storing the length of * the next record into the fifo */ @@ -319,7 +318,7 @@ static inline void __kfifo_poke_n(struct kfifo *fifo, #undef __KFIFO_PUT } -/** +/* * __kfifo_in_... internal functions for put date into the fifo * do not call it directly, use kfifo_in_rec() instead */ @@ -367,7 +366,7 @@ static inline __must_check unsigned int kfifo_in_rec(struct kfifo *fifo, return __kfifo_in_rec(fifo, from, n, recsize); } -/** +/* * __kfifo_out_... internal functions for get date from the fifo * do not call it directly, use kfifo_out_rec() instead */ @@ -425,7 +424,7 @@ static inline __must_check unsigned int kfifo_out_rec(struct kfifo *fifo, return __kfifo_out_rec(fifo, to, n, recsize, total); } -/** +/* * __kfifo_from_user_... internal functions for transfer from user space into * the fifo. do not call it directly, use kfifo_from_user_rec() instead */ @@ -474,7 +473,7 @@ static inline __must_check unsigned int kfifo_from_user_rec(struct kfifo *fifo, return __kfifo_from_user_rec(fifo, from, n, recsize); } -/** +/* * __kfifo_to_user_... internal functions for transfer fifo data into user space * do not call it directly, use kfifo_to_user_rec() instead */ @@ -533,7 +532,7 @@ static inline __must_check unsigned int kfifo_to_user_rec(struct kfifo *fifo, return __kfifo_to_user_rec(fifo, to, n, recsize, total); } -/** +/* * __kfifo_peek_... internal functions for peek into the next fifo record * do not call it directly, use kfifo_peek_rec() instead */ @@ -557,7 +556,7 @@ static inline __must_check unsigned int kfifo_peek_rec(struct kfifo *fifo, return __kfifo_peek_n(fifo, recsize); } -/** +/* * __kfifo_skip_... internal functions for skip the next fifo record * do not call it directly, use kfifo_skip_rec() instead */ diff --git a/include/linux/pci.h b/include/linux/pci.h index bf1e6708084..5da0690d9ce 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -566,6 +566,9 @@ void pcibios_align_resource(void *, struct resource *, resource_size_t, resource_size_t); void pcibios_update_irq(struct pci_dev *, int irq); +/* Weak but can be overriden by arch */ +void pci_fixup_cardbus(struct pci_bus *); + /* Generic PCI functions used internally */ extern struct pci_bus *pci_find_bus(int domain, int busnr); diff --git a/include/linux/quota.h b/include/linux/quota.h index e70e6219424..a6861f11748 100644 --- a/include/linux/quota.h +++ b/include/linux/quota.h @@ -315,8 +315,9 @@ struct dquot_operations { int (*claim_space) (struct inode *, qsize_t); /* release rsved quota for delayed alloc */ void (*release_rsv) (struct inode *, qsize_t); - /* get reserved quota for delayed alloc */ - qsize_t (*get_reserved_space) (struct inode *); + /* get reserved quota for delayed alloc, value returned is managed by + * quota code only */ + qsize_t *(*get_reserved_space) (struct inode *); }; /* Operations handling requests from userspace */ diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h index c96c1858fe2..1ba3cf6edfb 100644 --- a/include/linux/reiserfs_fs.h +++ b/include/linux/reiserfs_fs.h @@ -62,6 +62,12 @@ void reiserfs_write_unlock(struct super_block *s); int reiserfs_write_lock_once(struct super_block *s); void reiserfs_write_unlock_once(struct super_block *s, int lock_depth); +#ifdef CONFIG_REISERFS_CHECK +void reiserfs_lock_check_recursive(struct super_block *s); +#else +static inline void reiserfs_lock_check_recursive(struct super_block *s) { } +#endif + /* * Several mutexes depend on the write lock. * However sometimes we want to relax the write lock while we hold @@ -92,11 +98,31 @@ void reiserfs_write_unlock_once(struct super_block *s, int lock_depth); static inline void reiserfs_mutex_lock_safe(struct mutex *m, struct super_block *s) { + reiserfs_lock_check_recursive(s); reiserfs_write_unlock(s); mutex_lock(m); reiserfs_write_lock(s); } +static inline void +reiserfs_mutex_lock_nested_safe(struct mutex *m, unsigned int subclass, + struct super_block *s) +{ + reiserfs_lock_check_recursive(s); + reiserfs_write_unlock(s); + mutex_lock_nested(m, subclass); + reiserfs_write_lock(s); +} + +static inline void +reiserfs_down_read_safe(struct rw_semaphore *sem, struct super_block *s) +{ + reiserfs_lock_check_recursive(s); + reiserfs_write_unlock(s); + down_read(sem); + reiserfs_write_lock(s); +} + /* * When we schedule, we usually want to also release the write lock, * according to the previous bkl based locking scheme of reiserfs. diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h index 34c4475ac4a..4f95c1aac2f 100644 --- a/include/linux/sonypi.h +++ b/include/linux/sonypi.h @@ -111,6 +111,7 @@ #define SONYPI_EVENT_VOLUME_INC_PRESSED 69 #define SONYPI_EVENT_VOLUME_DEC_PRESSED 70 #define SONYPI_EVENT_BRIGHTNESS_PRESSED 71 +#define SONYPI_EVENT_MEDIA_PRESSED 72 /* get/set brightness */ #define SONYPI_IOCGBRT _IOR('v', 0, __u8) diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 65793e90d6f..207466a49f3 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -195,7 +195,7 @@ struct perf_event_attr; static const struct syscall_metadata __used \ __attribute__((__aligned__(4))) \ __attribute__((section("__syscalls_metadata"))) \ - __syscall_meta_##sname = { \ + __syscall_meta__##sname = { \ .name = "sys_"#sname, \ .nb_args = 0, \ .enter_event = &event_enter__##sname, \ diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 877ba039e6a..bd27fbc9db6 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -482,6 +482,7 @@ enum NET_IPV4_CONF_ARP_ACCEPT=21, NET_IPV4_CONF_ARP_NOTIFY=22, NET_IPV4_CONF_ACCEPT_LOCAL=23, + NET_IPV4_CONF_SRC_VMARK=24, __NET_IPV4_CONF_MAX }; diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 9d68fed50f1..cfa83083a2d 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -99,8 +99,9 @@ int __must_check sysfs_chmod_file(struct kobject *kobj, struct attribute *attr, void sysfs_remove_file(struct kobject *kobj, const struct attribute *attr); int __must_check sysfs_create_bin_file(struct kobject *kobj, - struct bin_attribute *attr); -void sysfs_remove_bin_file(struct kobject *kobj, struct bin_attribute *attr); + const struct bin_attribute *attr); +void sysfs_remove_bin_file(struct kobject *kobj, + const struct bin_attribute *attr); int __must_check sysfs_create_link(struct kobject *kobj, struct kobject *target, const char *name); @@ -175,13 +176,13 @@ static inline void sysfs_remove_file(struct kobject *kobj, } static inline int sysfs_create_bin_file(struct kobject *kobj, - struct bin_attribute *attr) + const struct bin_attribute *attr) { return 0; } static inline void sysfs_remove_bin_file(struct kobject *kobj, - struct bin_attribute *attr) + const struct bin_attribute *attr) { } diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index acf6e457c04..1819396ed50 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -16,6 +16,7 @@ #include <linux/kref.h> #include <linux/mutex.h> #include <linux/sysrq.h> +#include <linux/kfifo.h> #define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ #define SERIAL_TTY_MINORS 254 /* loads of devices :) */ @@ -94,7 +95,7 @@ struct usb_serial_port { unsigned char *bulk_out_buffer; int bulk_out_size; struct urb *write_urb; - struct kfifo *write_fifo; + struct kfifo write_fifo; int write_urb_busy; __u8 bulk_out_endpointAddress; diff --git a/include/linux/writeback.h b/include/linux/writeback.h index c18c008f4bb..76e8903cd20 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -70,6 +70,7 @@ struct writeback_control { struct bdi_writeback; int inode_wait(void *); void writeback_inodes_sb(struct super_block *); +int writeback_inodes_sb_if_idle(struct super_block *); void sync_inodes_sb(struct super_block *); void writeback_inodes_wbc(struct writeback_control *wbc); long wb_do_writeback(struct bdi_writeback *wb, int force_wait); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 2aff4906b2a..0bf36975227 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -547,7 +547,6 @@ enum mac80211_rx_flags { * unspecified depending on the hardware capabilities flags * @IEEE80211_HW_SIGNAL_* * @noise: noise when receiving this frame, in dBm. - * @qual: overall signal quality indication, in percent (0-100). * @antenna: antenna used * @rate_idx: index of data rate into band's supported rates or MCS index if * HT rates are use (RX_FLAG_HT) @@ -559,7 +558,6 @@ struct ieee80211_rx_status { int freq; int signal; int noise; - int __deprecated qual; int antenna; int rate_idx; int flag; @@ -1737,6 +1735,12 @@ static inline void ieee80211_rx_ni(struct ieee80211_hw *hw, local_bh_enable(); } +/* + * The TX headroom reserved by mac80211 for its own tx_status functions. + * This is enough for the radiotap header. + */ +#define IEEE80211_TX_STATUS_HEADROOM 13 + /** * ieee80211_tx_status - transmit status callback * diff --git a/include/scsi/libsrp.h b/include/scsi/libsrp.h index 07e3adde21d..f4105c91af5 100644 --- a/include/scsi/libsrp.h +++ b/include/scsi/libsrp.h @@ -2,6 +2,7 @@ #define __LIBSRP_H__ #include <linux/list.h> +#include <linux/kfifo.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_host.h> #include <scsi/srp.h> diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h index 73523151a73..c6fe03e902c 100644 --- a/include/trace/ftrace.h +++ b/include/trace/ftrace.h @@ -414,7 +414,8 @@ ftrace_raw_output_##call(struct trace_iterator *iter, int flags) \ BUILD_BUG_ON(len > MAX_FILTER_STR_VAL); \ ret = trace_define_field(event_call, #type "[" #len "]", #item, \ offsetof(typeof(field), item), \ - sizeof(field.item), 0, FILTER_OTHER); \ + sizeof(field.item), \ + is_signed_type(type), FILTER_OTHER); \ if (ret) \ return ret; @@ -422,8 +423,8 @@ ftrace_raw_output_##call(struct trace_iterator *iter, int flags) \ #define __dynamic_array(type, item, len) \ ret = trace_define_field(event_call, "__data_loc " #type "[]", #item, \ offsetof(typeof(field), __data_loc_##item), \ - sizeof(field.__data_loc_##item), 0, \ - FILTER_OTHER); + sizeof(field.__data_loc_##item), \ + is_signed_type(type), FILTER_OTHER); #undef __string #define __string(item, src) __dynamic_array(char, item, -1) diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c index dbcbf6a33a0..50dbd599958 100644 --- a/kernel/hw_breakpoint.c +++ b/kernel/hw_breakpoint.c @@ -40,6 +40,7 @@ #include <linux/percpu.h> #include <linux/sched.h> #include <linux/init.h> +#include <linux/cpu.h> #include <linux/smp.h> #include <linux/hw_breakpoint.h> @@ -388,7 +389,8 @@ register_wide_hw_breakpoint(struct perf_event_attr *attr, if (!cpu_events) return ERR_PTR(-ENOMEM); - for_each_possible_cpu(cpu) { + get_online_cpus(); + for_each_online_cpu(cpu) { pevent = per_cpu_ptr(cpu_events, cpu); bp = perf_event_create_kernel_counter(attr, cpu, -1, triggered); @@ -399,18 +401,20 @@ register_wide_hw_breakpoint(struct perf_event_attr *attr, goto fail; } } + put_online_cpus(); return cpu_events; fail: - for_each_possible_cpu(cpu) { + for_each_online_cpu(cpu) { pevent = per_cpu_ptr(cpu_events, cpu); if (IS_ERR(*pevent)) break; unregister_hw_breakpoint(*pevent); } + put_online_cpus(); + free_percpu(cpu_events); - /* return the error if any */ return ERR_PTR(err); } EXPORT_SYMBOL_GPL(register_wide_hw_breakpoint); diff --git a/kernel/kprobes.c b/kernel/kprobes.c index e5342a344c4..b7df302a020 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -1035,7 +1035,7 @@ int __kprobes register_kretprobe(struct kretprobe *rp) /* Pre-allocate memory for max kretprobe instances */ if (rp->maxactive <= 0) { #ifdef CONFIG_PREEMPT - rp->maxactive = max(10, 2 * num_possible_cpus()); + rp->maxactive = max_t(unsigned int, 10, 2*num_possible_cpus()); #else rp->maxactive = num_possible_cpus(); #endif diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 1f38270f08c..603c0d8b5df 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -5148,7 +5148,7 @@ int perf_event_init_task(struct task_struct *child) GFP_KERNEL); if (!child_ctx) { ret = -ENOMEM; - goto exit; + break; } __perf_event_init_context(child_ctx, child); @@ -5164,7 +5164,7 @@ int perf_event_init_task(struct task_struct *child) } } - if (inherited_all) { + if (child_ctx && inherited_all) { /* * Mark the child context as a clone of the parent * context, or of whatever the parent is a clone of. @@ -5184,7 +5184,6 @@ int perf_event_init_task(struct task_struct *child) get_ctx(child_ctx->parent_ctx); } -exit: mutex_unlock(&parent_ctx->mutex); perf_unpin_context(parent_ctx); diff --git a/kernel/sched.c b/kernel/sched.c index 87f1f47beff..c535cc4f642 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2045,11 +2045,10 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu) trace_sched_migrate_task(p, new_cpu); - if (task_cpu(p) == new_cpu) - return; - - p->se.nr_migrations++; - perf_sw_event(PERF_COUNT_SW_CPU_MIGRATIONS, 1, 1, NULL, 0); + if (task_cpu(p) != new_cpu) { + p->se.nr_migrations++; + perf_sw_event(PERF_COUNT_SW_CPU_MIGRATIONS, 1, 1, NULL, 0); + } __set_task_cpu(p, new_cpu); } diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c index 112533d5fc0..8f5d16e0707 100644 --- a/kernel/sysctl_binary.c +++ b/kernel/sysctl_binary.c @@ -1417,6 +1417,35 @@ static void deprecated_sysctl_warning(const int *name, int nlen) return; } +#define WARN_ONCE_HASH_BITS 8 +#define WARN_ONCE_HASH_SIZE (1<<WARN_ONCE_HASH_BITS) + +static DECLARE_BITMAP(warn_once_bitmap, WARN_ONCE_HASH_SIZE); + +#define FNV32_OFFSET 2166136261U +#define FNV32_PRIME 0x01000193 + +/* + * Print each legacy sysctl (approximately) only once. + * To avoid making the tables non-const use a external + * hash-table instead. + * Worst case hash collision: 6, but very rarely. + * NOTE! We don't use the SMP-safe bit tests. We simply + * don't care enough. + */ +static void warn_on_bintable(const int *name, int nlen) +{ + int i; + u32 hash = FNV32_OFFSET; + + for (i = 0; i < nlen; i++) + hash = (hash ^ name[i]) * FNV32_PRIME; + hash %= WARN_ONCE_HASH_SIZE; + if (__test_and_set_bit(hash, warn_once_bitmap)) + return; + deprecated_sysctl_warning(name, nlen); +} + static ssize_t do_sysctl(int __user *args_name, int nlen, void __user *oldval, size_t oldlen, void __user *newval, size_t newlen) { @@ -1431,7 +1460,7 @@ static ssize_t do_sysctl(int __user *args_name, int nlen, if (get_user(name[i], args_name + i)) return -EFAULT; - deprecated_sysctl_warning(name, nlen); + warn_on_bintable(name, nlen); return binary_sysctl(name, nlen, oldval, oldlen, newval, newlen); } diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index d006554888d..6c22d8a2f28 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -12,17 +12,17 @@ config NOP_TRACER config HAVE_FTRACE_NMI_ENTER bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config HAVE_FUNCTION_TRACER bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config HAVE_FUNCTION_GRAPH_TRACER bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config HAVE_FUNCTION_GRAPH_FP_TEST bool @@ -34,17 +34,17 @@ config HAVE_FUNCTION_GRAPH_FP_TEST config HAVE_FUNCTION_TRACE_MCOUNT_TEST bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config HAVE_DYNAMIC_FTRACE bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config HAVE_FTRACE_MCOUNT_RECORD bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config HAVE_HW_BRANCH_TRACER bool @@ -52,7 +52,7 @@ config HAVE_HW_BRANCH_TRACER config HAVE_SYSCALL_TRACEPOINTS bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config TRACER_MAX_TRACE bool @@ -83,7 +83,7 @@ config RING_BUFFER_ALLOW_SWAP # This allows those options to appear when no other tracer is selected. But the # options do not appear when something else selects it. We need the two options # GENERIC_TRACER and TRACING to avoid circular dependencies to accomplish the -# hidding of the automatic options. +# hiding of the automatic options. config TRACING bool @@ -119,7 +119,7 @@ menuconfig FTRACE bool "Tracers" default y if DEBUG_KERNEL help - Enable the kernel tracing infrastructure. + Enable the kernel tracing infrastructure. if FTRACE @@ -133,7 +133,7 @@ config FUNCTION_TRACER help Enable the kernel to trace every kernel function. This is done by using a compiler feature to insert a small, 5-byte No-Operation - instruction to the beginning of every kernel function, which NOP + instruction at the beginning of every kernel function, which NOP sequence is then dynamically patched into a tracer call when tracing is enabled by the administrator. If it's runtime disabled (the bootup default), then the overhead of the instructions is very @@ -150,7 +150,7 @@ config FUNCTION_GRAPH_TRACER and its entry. Its first purpose is to trace the duration of functions and draw a call graph for each thread with some information like - the return value. This is done by setting the current return + the return value. This is done by setting the current return address on the current task structure into a stack of calls. @@ -173,7 +173,7 @@ config IRQSOFF_TRACER echo 0 > /sys/kernel/debug/tracing/tracing_max_latency - (Note that kernel size and overhead increases with this option + (Note that kernel size and overhead increase with this option enabled. This option and the preempt-off timing option can be used together or separately.) @@ -186,7 +186,7 @@ config PREEMPT_TRACER select TRACER_MAX_TRACE select RING_BUFFER_ALLOW_SWAP help - This option measures the time spent in preemption off critical + This option measures the time spent in preemption-off critical sections, with microsecond accuracy. The default measurement method is a maximum search, which is @@ -195,7 +195,7 @@ config PREEMPT_TRACER echo 0 > /sys/kernel/debug/tracing/tracing_max_latency - (Note that kernel size and overhead increases with this option + (Note that kernel size and overhead increase with this option enabled. This option and the irqs-off timing option can be used together or separately.) @@ -222,7 +222,7 @@ config ENABLE_DEFAULT_TRACERS depends on !GENERIC_TRACER select TRACING help - This tracer hooks to various trace points in the kernel + This tracer hooks to various trace points in the kernel, allowing the user to pick and choose which trace point they want to trace. It also includes the sched_switch tracer plugin. @@ -265,19 +265,19 @@ choice The likely/unlikely profiler only looks at the conditions that are annotated with a likely or unlikely macro. - The "all branch" profiler will profile every if statement in the + The "all branch" profiler will profile every if-statement in the kernel. This profiler will also enable the likely/unlikely - profiler as well. + profiler. - Either of the above profilers add a bit of overhead to the system. - If unsure choose "No branch profiling". + Either of the above profilers adds a bit of overhead to the system. + If unsure, choose "No branch profiling". config BRANCH_PROFILE_NONE bool "No branch profiling" help - No branch profiling. Branch profiling adds a bit of overhead. - Only enable it if you want to analyse the branching behavior. - Otherwise keep it disabled. + No branch profiling. Branch profiling adds a bit of overhead. + Only enable it if you want to analyse the branching behavior. + Otherwise keep it disabled. config PROFILE_ANNOTATED_BRANCHES bool "Trace likely/unlikely profiler" @@ -288,7 +288,7 @@ config PROFILE_ANNOTATED_BRANCHES /sys/kernel/debug/tracing/profile_annotated_branch - Note: this will add a significant overhead, only turn this + Note: this will add a significant overhead; only turn this on if you need to profile the system's use of these macros. config PROFILE_ALL_BRANCHES @@ -305,7 +305,7 @@ config PROFILE_ALL_BRANCHES This configuration, when enabled, will impose a great overhead on the system. This should only be enabled when the system - is to be analyzed + is to be analyzed in much detail. endchoice config TRACING_BRANCHES @@ -335,7 +335,7 @@ config POWER_TRACER depends on X86 select GENERIC_TRACER help - This tracer helps developers to analyze and optimize the kernels + This tracer helps developers to analyze and optimize the kernel's power management decisions, specifically the C-state and P-state behavior. @@ -391,14 +391,14 @@ config HW_BRANCH_TRACER select GENERIC_TRACER help This tracer records all branches on the system in a circular - buffer giving access to the last N branches for each cpu. + buffer, giving access to the last N branches for each cpu. config KMEMTRACE bool "Trace SLAB allocations" select GENERIC_TRACER help kmemtrace provides tracing for slab allocator functions, such as - kmalloc, kfree, kmem_cache_alloc, kmem_cache_free etc.. Collected + kmalloc, kfree, kmem_cache_alloc, kmem_cache_free, etc. Collected data is then fed to the userspace application in order to analyse allocation hotspots, internal fragmentation and so on, making it possible to see how well an allocator performs, as well as debug @@ -417,15 +417,15 @@ config WORKQUEUE_TRACER bool "Trace workqueues" select GENERIC_TRACER help - The workqueue tracer provides some statistical informations + The workqueue tracer provides some statistical information about each cpu workqueue thread such as the number of the works inserted and executed since their creation. It can help - to evaluate the amount of work each of them have to perform. + to evaluate the amount of work each of them has to perform. For example it can help a developer to decide whether he should - choose a per cpu workqueue instead of a singlethreaded one. + choose a per-cpu workqueue instead of a singlethreaded one. config BLK_DEV_IO_TRACE - bool "Support for tracing block io actions" + bool "Support for tracing block IO actions" depends on SYSFS depends on BLOCK select RELAY @@ -456,15 +456,15 @@ config KPROBE_EVENT select TRACING default y help - This allows the user to add tracing events (similar to tracepoints) on the fly - via the ftrace interface. See Documentation/trace/kprobetrace.txt - for more details. + This allows the user to add tracing events (similar to tracepoints) + on the fly via the ftrace interface. See + Documentation/trace/kprobetrace.txt for more details. Those events can be inserted wherever kprobes can probe, and record various register and memory values. - This option is also required by perf-probe subcommand of perf tools. If - you want to use perf tools, this option is strongly recommended. + This option is also required by perf-probe subcommand of perf tools. + If you want to use perf tools, this option is strongly recommended. config DYNAMIC_FTRACE bool "enable/disable ftrace tracepoints dynamically" @@ -472,32 +472,32 @@ config DYNAMIC_FTRACE depends on HAVE_DYNAMIC_FTRACE default y help - This option will modify all the calls to ftrace dynamically - (will patch them out of the binary image and replaces them - with a No-Op instruction) as they are called. A table is - created to dynamically enable them again. + This option will modify all the calls to ftrace dynamically + (will patch them out of the binary image and replace them + with a No-Op instruction) as they are called. A table is + created to dynamically enable them again. - This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but otherwise - has native performance as long as no tracing is active. + This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but + otherwise has native performance as long as no tracing is active. - The changes to the code are done by a kernel thread that - wakes up once a second and checks to see if any ftrace calls - were made. If so, it runs stop_machine (stops all CPUS) - and modifies the code to jump over the call to ftrace. + The changes to the code are done by a kernel thread that + wakes up once a second and checks to see if any ftrace calls + were made. If so, it runs stop_machine (stops all CPUS) + and modifies the code to jump over the call to ftrace. config FUNCTION_PROFILER bool "Kernel function profiler" depends on FUNCTION_TRACER default n help - This option enables the kernel function profiler. A file is created - in debugfs called function_profile_enabled which defaults to zero. - When a 1 is echoed into this file profiling begins, and when a - zero is entered, profiling stops. A file in the trace_stats - directory called functions, that show the list of functions that - have been hit and their counters. + This option enables the kernel function profiler. A file is created + in debugfs called function_profile_enabled which defaults to zero. + When a 1 is echoed into this file profiling begins, and when a + zero is entered, profiling stops. A "functions" file is created in + the trace_stats directory; this file shows the list of functions that + have been hit and their counters. - If in doubt, say N + If in doubt, say N. config FTRACE_MCOUNT_RECORD def_bool y @@ -556,8 +556,8 @@ config RING_BUFFER_BENCHMARK tristate "Ring buffer benchmark stress tester" depends on RING_BUFFER help - This option creates a test to stress the ring buffer and bench mark it. - It creates its own ring buffer such that it will not interfer with + This option creates a test to stress the ring buffer and benchmark it. + It creates its own ring buffer such that it will not interfere with any other users of the ring buffer (such as ftrace). It then creates a producer and consumer that will run for 10 seconds and sleep for 10 seconds. Each interval it will print out the number of events @@ -566,7 +566,7 @@ config RING_BUFFER_BENCHMARK It does not disable interrupts or raise its priority, so it may be affected by processes that are running. - If unsure, say N + If unsure, say N. endif # FTRACE diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 8b9f20ab8ee..0df1b0f2cb9 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3949,7 +3949,7 @@ trace_options_write(struct file *filp, const char __user *ubuf, size_t cnt, if (!!(topt->flags->val & topt->opt->bit) != val) { mutex_lock(&trace_types_lock); ret = __set_tracer_option(current_trace, topt->flags, - topt->opt, val); + topt->opt, !val); mutex_unlock(&trace_types_lock); if (ret) return ret; diff --git a/kernel/trace/trace_export.c b/kernel/trace/trace_export.c index 458e5bfe26d..d4fa5dc1ee4 100644 --- a/kernel/trace/trace_export.c +++ b/kernel/trace/trace_export.c @@ -158,7 +158,8 @@ ftrace_format_##name(struct ftrace_event_call *unused, \ BUILD_BUG_ON(len > MAX_FILTER_STR_VAL); \ ret = trace_define_field(event_call, #type "[" #len "]", #item, \ offsetof(typeof(field), item), \ - sizeof(field.item), 0, FILTER_OTHER); \ + sizeof(field.item), \ + is_signed_type(type), FILTER_OTHER); \ if (ret) \ return ret; @@ -168,8 +169,8 @@ ftrace_format_##name(struct ftrace_event_call *unused, \ ret = trace_define_field(event_call, #type "[" #len "]", #item, \ offsetof(typeof(field), \ container.item), \ - sizeof(field.container.item), 0, \ - FILTER_OTHER); \ + sizeof(field.container.item), \ + is_signed_type(type), FILTER_OTHER); \ if (ret) \ return ret; diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 375f81a568d..6ea90c0e2c9 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -1201,10 +1201,11 @@ static int __probe_event_show_format(struct trace_seq *s, #undef SHOW_FIELD #define SHOW_FIELD(type, item, name) \ do { \ - ret = trace_seq_printf(s, "\tfield: " #type " %s;\t" \ - "offset:%u;\tsize:%u;\n", name, \ + ret = trace_seq_printf(s, "\tfield:" #type " %s;\t" \ + "offset:%u;\tsize:%u;\tsigned:%d;\n", name,\ (unsigned int)offsetof(typeof(field), item),\ - (unsigned int)sizeof(type)); \ + (unsigned int)sizeof(type), \ + is_signed_type(type)); \ if (!ret) \ return 0; \ } while (0) diff --git a/kernel/trace/trace_ksym.c b/kernel/trace/trace_ksym.c index faf37fa4408..94103cdcf9d 100644 --- a/kernel/trace/trace_ksym.c +++ b/kernel/trace/trace_ksym.c @@ -26,12 +26,13 @@ #include <linux/fs.h> #include "trace_output.h" -#include "trace_stat.h" #include "trace.h" #include <linux/hw_breakpoint.h> #include <asm/hw_breakpoint.h> +#include <asm/atomic.h> + /* * For now, let us restrict the no. of symbols traced simultaneously to number * of available hardware breakpoint registers. @@ -44,7 +45,7 @@ struct trace_ksym { struct perf_event **ksym_hbp; struct perf_event_attr attr; #ifdef CONFIG_PROFILE_KSYM_TRACER - unsigned long counter; + atomic64_t counter; #endif struct hlist_node ksym_hlist; }; @@ -69,9 +70,8 @@ void ksym_collect_stats(unsigned long hbp_hit_addr) rcu_read_lock(); hlist_for_each_entry_rcu(entry, node, &ksym_filter_head, ksym_hlist) { - if ((entry->attr.bp_addr == hbp_hit_addr) && - (entry->counter <= MAX_UL_INT)) { - entry->counter++; + if (entry->attr.bp_addr == hbp_hit_addr) { + atomic64_inc(&entry->counter); break; } } @@ -197,7 +197,6 @@ int process_new_ksym_entry(char *ksymname, int op, unsigned long addr) entry->attr.bp_addr = addr; entry->attr.bp_len = HW_BREAKPOINT_LEN_4; - ret = -EAGAIN; entry->ksym_hbp = register_wide_hw_breakpoint(&entry->attr, ksym_hbp_handler); @@ -300,8 +299,8 @@ static ssize_t ksym_trace_filter_write(struct file *file, * 2: echo 0 > ksym_trace_filter * 3: echo "*:---" > ksym_trace_filter */ - if (!buf[0] || !strcmp(buf, "0") || - !strcmp(buf, "*:---")) { + if (!input_string[0] || !strcmp(input_string, "0") || + !strcmp(input_string, "*:---")) { __ksym_trace_reset(); ret = 0; goto out; @@ -444,102 +443,77 @@ struct tracer ksym_tracer __read_mostly = .print_line = ksym_trace_output }; -__init static int init_ksym_trace(void) -{ - struct dentry *d_tracer; - struct dentry *entry; - - d_tracer = tracing_init_dentry(); - ksym_filter_entry_count = 0; - - entry = debugfs_create_file("ksym_trace_filter", 0644, d_tracer, - NULL, &ksym_tracing_fops); - if (!entry) - pr_warning("Could not create debugfs " - "'ksym_trace_filter' file\n"); - - return register_tracer(&ksym_tracer); -} -device_initcall(init_ksym_trace); - - #ifdef CONFIG_PROFILE_KSYM_TRACER -static int ksym_tracer_stat_headers(struct seq_file *m) +static int ksym_profile_show(struct seq_file *m, void *v) { + struct hlist_node *node; + struct trace_ksym *entry; + int access_type = 0; + char fn_name[KSYM_NAME_LEN]; + seq_puts(m, " Access Type "); seq_puts(m, " Symbol Counter\n"); seq_puts(m, " ----------- "); seq_puts(m, " ------ -------\n"); - return 0; -} -static int ksym_tracer_stat_show(struct seq_file *m, void *v) -{ - struct hlist_node *stat = v; - struct trace_ksym *entry; - int access_type = 0; - char fn_name[KSYM_NAME_LEN]; + rcu_read_lock(); + hlist_for_each_entry_rcu(entry, node, &ksym_filter_head, ksym_hlist) { - entry = hlist_entry(stat, struct trace_ksym, ksym_hlist); + access_type = entry->attr.bp_type; - access_type = entry->attr.bp_type; + switch (access_type) { + case HW_BREAKPOINT_R: + seq_puts(m, " R "); + break; + case HW_BREAKPOINT_W: + seq_puts(m, " W "); + break; + case HW_BREAKPOINT_R | HW_BREAKPOINT_W: + seq_puts(m, " RW "); + break; + default: + seq_puts(m, " NA "); + } - switch (access_type) { - case HW_BREAKPOINT_R: - seq_puts(m, " R "); - break; - case HW_BREAKPOINT_W: - seq_puts(m, " W "); - break; - case HW_BREAKPOINT_R | HW_BREAKPOINT_W: - seq_puts(m, " RW "); - break; - default: - seq_puts(m, " NA "); + if (lookup_symbol_name(entry->attr.bp_addr, fn_name) >= 0) + seq_printf(m, " %-36s", fn_name); + else + seq_printf(m, " %-36s", "<NA>"); + seq_printf(m, " %15llu\n", + (unsigned long long)atomic64_read(&entry->counter)); } - - if (lookup_symbol_name(entry->attr.bp_addr, fn_name) >= 0) - seq_printf(m, " %-36s", fn_name); - else - seq_printf(m, " %-36s", "<NA>"); - seq_printf(m, " %15lu\n", entry->counter); + rcu_read_unlock(); return 0; } -static void *ksym_tracer_stat_start(struct tracer_stat *trace) +static int ksym_profile_open(struct inode *node, struct file *file) { - return ksym_filter_head.first; -} - -static void * -ksym_tracer_stat_next(void *v, int idx) -{ - struct hlist_node *stat = v; - - return stat->next; + return single_open(file, ksym_profile_show, NULL); } -static struct tracer_stat ksym_tracer_stats = { - .name = "ksym_tracer", - .stat_start = ksym_tracer_stat_start, - .stat_next = ksym_tracer_stat_next, - .stat_headers = ksym_tracer_stat_headers, - .stat_show = ksym_tracer_stat_show +static const struct file_operations ksym_profile_fops = { + .open = ksym_profile_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, }; +#endif /* CONFIG_PROFILE_KSYM_TRACER */ -__init static int ksym_tracer_stat_init(void) +__init static int init_ksym_trace(void) { - int ret; + struct dentry *d_tracer; - ret = register_stat_tracer(&ksym_tracer_stats); - if (ret) { - printk(KERN_WARNING "Warning: could not register " - "ksym tracer stats\n"); - return 1; - } + d_tracer = tracing_init_dentry(); - return 0; + trace_create_file("ksym_trace_filter", 0644, d_tracer, + NULL, &ksym_tracing_fops); + +#ifdef CONFIG_PROFILE_KSYM_TRACER + trace_create_file("ksym_profile", 0444, d_tracer, + NULL, &ksym_profile_fops); +#endif + + return register_tracer(&ksym_tracer); } -fs_initcall(ksym_tracer_stat_init); -#endif /* CONFIG_PROFILE_KSYM_TRACER */ +device_initcall(init_ksym_trace); diff --git a/lib/dma-debug.c b/lib/dma-debug.c index d9b08e0f7f5..cf906201aec 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -670,12 +670,13 @@ static int device_dma_allocations(struct device *dev) return count; } -static int dma_debug_device_change(struct notifier_block *nb, - unsigned long action, void *data) +static int dma_debug_device_change(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; int count; + if (global_disable) + return 0; switch (action) { case BUS_NOTIFY_UNBOUND_DRIVER: @@ -697,6 +698,9 @@ void dma_debug_add_bus(struct bus_type *bus) { struct notifier_block *nb; + if (global_disable) + return; + nb = kzalloc(sizeof(struct notifier_block), GFP_KERNEL); if (nb == NULL) { pr_err("dma_debug_add_bus: out of memory\n"); diff --git a/mm/Kconfig b/mm/Kconfig index ee9f3e0f2b6..17b8947aa7d 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -253,7 +253,7 @@ config MEMORY_FAILURE config HWPOISON_INJECT tristate "HWPoison pages injector" - depends on MEMORY_FAILURE && DEBUG_KERNEL + depends on MEMORY_FAILURE && DEBUG_KERNEL && PROC_FS select PROC_PAGE_MONITOR config NOMMU_INITIAL_TRIM_EXCESS diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 6a0466ed5bf..17299fd4577 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -52,6 +52,8 @@ int sysctl_memory_failure_recovery __read_mostly = 1; atomic_long_t mce_bad_pages __read_mostly = ATOMIC_LONG_INIT(0); +#if defined(CONFIG_HWPOISON_INJECT) || defined(CONFIG_HWPOISON_INJECT_MODULE) + u32 hwpoison_filter_enable = 0; u32 hwpoison_filter_dev_major = ~0U; u32 hwpoison_filter_dev_minor = ~0U; @@ -164,6 +166,13 @@ int hwpoison_filter(struct page *p) return 0; } +#else +int hwpoison_filter(struct page *p) +{ + return 0; +} +#endif + EXPORT_SYMBOL_GPL(hwpoison_filter); /* diff --git a/mm/mmap.c b/mm/mmap.c index d9c77b2dbe9..ee2298936fe 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1043,6 +1043,46 @@ unsigned long do_mmap_pgoff(struct file *file, unsigned long addr, } EXPORT_SYMBOL(do_mmap_pgoff); +SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, + unsigned long, fd, unsigned long, pgoff) +{ + struct file *file = NULL; + unsigned long retval = -EBADF; + + if (!(flags & MAP_ANONYMOUS)) { + if (unlikely(flags & MAP_HUGETLB)) + return -EINVAL; + file = fget(fd); + if (!file) + goto out; + } else if (flags & MAP_HUGETLB) { + struct user_struct *user = NULL; + /* + * VM_NORESERVE is used because the reservations will be + * taken when vm_ops->mmap() is called + * A dummy user value is used because we are not locking + * memory so no accounting is necessary + */ + len = ALIGN(len, huge_page_size(&default_hstate)); + file = hugetlb_file_setup(HUGETLB_ANON_FILE, len, VM_NORESERVE, + &user, HUGETLB_ANONHUGE_INODE); + if (IS_ERR(file)) + return PTR_ERR(file); + } + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + + down_write(¤t->mm->mmap_sem); + retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); + up_write(¤t->mm->mmap_sem); + + if (file) + fput(file); +out: + return retval; +} + /* * Some shared mappigns will want the pages marked read-only * to track write events. If so, we'll downgrade vm_page_prot diff --git a/mm/nommu.c b/mm/nommu.c index 8687973462b..6f9248f89bd 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1398,6 +1398,31 @@ error_getting_region: } EXPORT_SYMBOL(do_mmap_pgoff); +SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, + unsigned long, fd, unsigned long, pgoff) +{ + struct file *file = NULL; + unsigned long retval = -EBADF; + + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + goto out; + } + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + + down_write(¤t->mm->mmap_sem); + retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); + up_write(¤t->mm->mmap_sem); + + if (file) + fput(file); +out: + return retval; +} + /* * split a vma into two pieces at address 'addr', a new vma is allocated either * for the first part or the tail. diff --git a/mm/page_alloc.c b/mm/page_alloc.c index d79b9258056..4e9f5cc5fb5 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2402,13 +2402,14 @@ int numa_zonelist_order_handler(ctl_table *table, int write, { char saved_string[NUMA_ZONELIST_ORDER_LEN]; int ret; + static DEFINE_MUTEX(zl_order_mutex); + mutex_lock(&zl_order_mutex); if (write) - strncpy(saved_string, (char*)table->data, - NUMA_ZONELIST_ORDER_LEN); + strcpy(saved_string, (char*)table->data); ret = proc_dostring(table, write, buffer, length, ppos); if (ret) - return ret; + goto out; if (write) { int oldval = user_zonelist_order; if (__parse_numa_zonelist_order((char*)table->data)) { @@ -2421,7 +2422,9 @@ int numa_zonelist_order_handler(ctl_table *table, int write, } else if (oldval != user_zonelist_order) build_all_zonelists(); } - return 0; +out: + mutex_unlock(&zl_order_mutex); + return ret; } diff --git a/mm/slab.c b/mm/slab.c index 7d41f15b48d..7451bdacaf1 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -654,7 +654,7 @@ static void init_node_lock_keys(int q) l3 = s->cs_cachep->nodelists[q]; if (!l3 || OFF_SLAB(s->cs_cachep)) - return; + continue; lockdep_set_class(&l3->list_lock, &on_slab_l3_key); alc = l3->alien; /* @@ -665,7 +665,7 @@ static void init_node_lock_keys(int q) * for alloc_alien_cache, */ if (!alc || (unsigned long)alc == BAD_ALIEN_MAGIC) - return; + continue; for_each_node(r) { if (alc[r]) lockdep_set_class(&alc[r]->lock, diff --git a/mm/util.c b/mm/util.c index b377ce43080..7c35ad95f92 100644 --- a/mm/util.c +++ b/mm/util.c @@ -4,10 +4,6 @@ #include <linux/module.h> #include <linux/err.h> #include <linux/sched.h> -#include <linux/hugetlb.h> -#include <linux/syscalls.h> -#include <linux/mman.h> -#include <linux/file.h> #include <asm/uaccess.h> #define CREATE_TRACE_POINTS @@ -272,46 +268,6 @@ int __attribute__((weak)) get_user_pages_fast(unsigned long start, } EXPORT_SYMBOL_GPL(get_user_pages_fast); -SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len, - unsigned long, prot, unsigned long, flags, - unsigned long, fd, unsigned long, pgoff) -{ - struct file * file = NULL; - unsigned long retval = -EBADF; - - if (!(flags & MAP_ANONYMOUS)) { - if (unlikely(flags & MAP_HUGETLB)) - return -EINVAL; - file = fget(fd); - if (!file) - goto out; - } else if (flags & MAP_HUGETLB) { - struct user_struct *user = NULL; - /* - * VM_NORESERVE is used because the reservations will be - * taken when vm_ops->mmap() is called - * A dummy user value is used because we are not locking - * memory so no accounting is necessary - */ - len = ALIGN(len, huge_page_size(&default_hstate)); - file = hugetlb_file_setup(HUGETLB_ANON_FILE, len, VM_NORESERVE, - &user, HUGETLB_ANONHUGE_INODE); - if (IS_ERR(file)) - return PTR_ERR(file); - } - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return retval; -} - /* Tracepoints definitions. */ EXPORT_TRACEPOINT_SYMBOL(kmalloc); EXPORT_TRACEPOINT_SYMBOL(kmem_cache_alloc); diff --git a/net/core/pktgen.c b/net/core/pktgen.c index a23b45f08ec..de0c2c72642 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -250,8 +250,7 @@ struct pktgen_dev { __u64 count; /* Default No packets to send */ __u64 sofar; /* How many pkts we've sent so far */ __u64 tx_bytes; /* How many bytes we've transmitted */ - __u64 errors; /* Errors when trying to transmit, - pkts will be re-sent */ + __u64 errors; /* Errors when trying to transmit, */ /* runtime counters relating to clone_skb */ @@ -3465,6 +3464,12 @@ static void pktgen_xmit(struct pktgen_dev *pkt_dev) pkt_dev->seq_num++; pkt_dev->tx_bytes += pkt_dev->last_pkt_size; break; + case NET_XMIT_DROP: + case NET_XMIT_CN: + case NET_XMIT_POLICED: + /* skb has been consumed */ + pkt_dev->errors++; + break; default: /* Drivers are not supposed to return other values! */ if (net_ratelimit()) pr_info("pktgen: %s xmit error: %d\n", diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 5cdbc102a41..040c4f05b65 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1397,6 +1397,7 @@ static struct devinet_sysctl_table { DEVINET_SYSCTL_RW_ENTRY(ACCEPT_SOURCE_ROUTE, "accept_source_route"), DEVINET_SYSCTL_RW_ENTRY(ACCEPT_LOCAL, "accept_local"), + DEVINET_SYSCTL_RW_ENTRY(SRC_VMARK, "src_valid_mark"), DEVINET_SYSCTL_RW_ENTRY(PROXY_ARP, "proxy_arp"), DEVINET_SYSCTL_RW_ENTRY(MEDIUM_ID, "medium_id"), DEVINET_SYSCTL_RW_ENTRY(BOOTP_RELAY, "bootp_relay"), diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 3323168ee52..82dbf711d6d 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -252,6 +252,8 @@ int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif, no_addr = in_dev->ifa_list == NULL; rpf = IN_DEV_RPFILTER(in_dev); accept_local = IN_DEV_ACCEPT_LOCAL(in_dev); + if (mark && !IN_DEV_SRC_VMARK(in_dev)) + fl.mark = 0; } rcu_read_unlock(); diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 3787455fb69..d7dcee68072 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -34,9 +34,28 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband, ht_cap->ht_supported = true; - ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & sband->ht_cap.cap; - ht_cap->cap &= ~IEEE80211_HT_CAP_SM_PS; - ht_cap->cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS; + /* + * The bits listed in this expression should be + * the same for the peer and us, if the station + * advertises more then we can't use those thus + * we mask them out. + */ + ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & + (sband->ht_cap.cap | + ~(IEEE80211_HT_CAP_LDPC_CODING | + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_DSSSCCK40)); + /* + * The STBC bits are asymmetric -- if we don't have + * TX then mask out the peer's RX and vice versa. + */ + if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC)) + ht_cap->cap &= ~IEEE80211_HT_CAP_RX_STBC; + if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)) + ht_cap->cap &= ~IEEE80211_HT_CAP_TX_STBC; ampdu_info = ht_cap_ie->ampdu_params_info; ht_cap->ampdu_factor = diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 10d13856f86..1f2db647bb5 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -382,6 +382,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata, u8 *bssid,u8 *addr, u32 supp_rates) { + struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; struct ieee80211_local *local = sdata->local; struct sta_info *sta; int band = local->hw.conf.channel->band; @@ -397,6 +398,9 @@ struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata, return NULL; } + if (ifibss->state == IEEE80211_IBSS_MLME_SEARCH) + return NULL; + if (compare_ether_addr(bssid, sdata->u.ibss.bssid)) return NULL; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 8116d1a96a4..0d2d94881f1 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -515,6 +515,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) * and we need some headroom for passing the frame to monitor * interfaces, but never both at the same time. */ + BUILD_BUG_ON(IEEE80211_TX_STATUS_HEADROOM != + sizeof(struct ieee80211_tx_status_rtap_hdr)); local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom, sizeof(struct ieee80211_tx_status_rtap_hdr)); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d8d50fb5e82..c79e59f82fd 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -915,6 +915,14 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL | IEEE80211_STA_BEACON_POLL); + /* + * Always handle WMM once after association regardless + * of the first value the AP uses. Setting -1 here has + * that effect because the AP values is an unsigned + * 4-bit value. + */ + sdata->u.mgd.wmm_last_param_set = -1; + ieee80211_led_assoc(local, 1); sdata->vif.bss_conf.assoc = 1; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 8834cc93c71..27ceaefd7bc 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1419,6 +1419,10 @@ static bool need_dynamic_ps(struct ieee80211_local *local) if (!local->ps_sdata) return false; + /* No point if we're going to suspend */ + if (local->quiescing) + return false; + return true; } diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 78a6e924c7e..dc76267e436 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1039,7 +1039,19 @@ int ieee80211_reconfig(struct ieee80211_local *local) /* restart hardware */ if (local->open_count) { + /* + * Upon resume hardware can sometimes be goofy due to + * various platform / driver / bus issues, so restarting + * the device may at times not work immediately. Propagate + * the error. + */ res = drv_start(local); + if (res) { + WARN(local->suspended, "Harware became unavailable " + "upon resume. This is could be a software issue" + "prior to suspend or a harware issue\n"); + return res; + } ieee80211_led_radio(local, true); } diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 1001db4912f..82e6002c8d6 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -93,7 +93,18 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len) } } - WARN_ON(!bss); + /* + * We might be coming here because the driver reported + * a successful association at the same time as the + * user requested a deauth. In that case, we will have + * removed the BSS from the auth_bsses list due to the + * deauth request when the assoc response makes it. If + * the two code paths acquire the lock the other way + * around, that's just the standard situation of a + * deauth being requested while connected. + */ + if (!bss) + goto out; } else if (wdev->conn) { cfg80211_sme_failed_assoc(wdev); /* diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 12dfa62aad1..0c2cbbebca9 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -601,7 +601,7 @@ int cfg80211_wext_siwscan(struct net_device *dev, struct cfg80211_registered_device *rdev; struct wiphy *wiphy; struct iw_scan_req *wreq = NULL; - struct cfg80211_scan_request *creq; + struct cfg80211_scan_request *creq = NULL; int i, err, n_channels = 0; enum ieee80211_band band; @@ -694,8 +694,10 @@ int cfg80211_wext_siwscan(struct net_device *dev, /* translate "Scan for SSID" request */ if (wreq) { if (wrqu->data.flags & IW_SCAN_THIS_ESSID) { - if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) - return -EINVAL; + if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) { + err = -EINVAL; + goto out; + } memcpy(creq->ssids[0].ssid, wreq->essid, wreq->essid_len); creq->ssids[0].ssid_len = wreq->essid_len; } @@ -707,12 +709,15 @@ int cfg80211_wext_siwscan(struct net_device *dev, err = rdev->ops->scan(wiphy, dev, creq); if (err) { rdev->scan_req = NULL; - kfree(creq); + /* creq will be freed below */ } else { nl80211_send_scan_start(rdev, dev); + /* creq now owned by driver */ + creq = NULL; dev_hold(dev); } out: + kfree(creq); cfg80211_unlock_rdev(rdev); return err; } diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index cb81ca35b0d..4725a549ad4 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1445,7 +1445,7 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy, if (!dev) goto free_dst; - /* Copy neighbout for reachability confirmation */ + /* Copy neighbour for reachability confirmation */ dst0->neighbour = neigh_clone(dst->neighbour); xfrm_init_path((struct xfrm_dst *)dst0, dst, nfheader_len); diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index c5699863643..656e474dca4 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -441,6 +441,7 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { int err; + struct aaci *aaci = substream->private_data; aaci_pcm_hw_free(substream); if (aacirun->pcm_open) { @@ -560,7 +561,6 @@ static int aaci_pcm_open(struct snd_pcm_substream *substream) static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { - struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; unsigned int channels = params_channels(params); int ret; @@ -659,7 +659,6 @@ static struct snd_pcm_ops aaci_playback_ops = { static int aaci_pcm_capture_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { - struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; int ret; diff --git a/sound/core/Kconfig b/sound/core/Kconfig index c15682a2f9d..475455c7661 100644 --- a/sound/core/Kconfig +++ b/sound/core/Kconfig @@ -5,6 +5,7 @@ config SND_TIMER config SND_PCM tristate select SND_TIMER + select GCD config SND_HWDEP tristate diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 29ab46a12e1..25b0641e6b8 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1918,13 +1918,13 @@ int snd_pcm_hw_constraints_complete(struct snd_pcm_substream *substream) err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE, hw->rate_min, hw->rate_max); - if (err < 0) - return err; + if (err < 0) + return err; err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, hw->period_bytes_min, hw->period_bytes_max); - if (err < 0) - return err; + if (err < 0) + return err; err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIODS, hw->periods_min, hw->periods_max); diff --git a/sound/core/pcm_timer.c b/sound/core/pcm_timer.c index ca8068b63d6..b01d9481d63 100644 --- a/sound/core/pcm_timer.c +++ b/sound/core/pcm_timer.c @@ -20,6 +20,7 @@ */ #include <linux/time.h> +#include <linux/gcd.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/timer.h> @@ -28,22 +29,6 @@ * Timer functions */ -/* Greatest common divisor */ -static unsigned long gcd(unsigned long a, unsigned long b) -{ - unsigned long r; - if (a < b) { - r = a; - a = b; - b = r; - } - while ((r = a % b) != 0) { - a = b; - b = r; - } - return b; -} - void snd_pcm_timer_resolution_change(struct snd_pcm_substream *substream) { unsigned long rate, mult, fsize, l, post; diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index 5fe34a8d8c8..e4581a42ace 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -42,7 +42,7 @@ static void snd_hda_generate_beep(struct work_struct *work) return; /* generate tone */ - snd_hda_codec_write_cache(codec, beep->nid, 0, + snd_hda_codec_write(codec, beep->nid, 0, AC_VERB_SET_BEEP_CONTROL, beep->tone); } @@ -119,7 +119,7 @@ static void snd_hda_do_detach(struct hda_beep *beep) beep->dev = NULL; cancel_work_sync(&beep->beep_work); /* turn off beep for sure */ - snd_hda_codec_write_cache(beep->codec, beep->nid, 0, + snd_hda_codec_write(beep->codec, beep->nid, 0, AC_VERB_SET_BEEP_CONTROL, 0); } @@ -192,7 +192,7 @@ int snd_hda_enable_beep_device(struct hda_codec *codec, int enable) beep->enabled = enable; if (!enable) { /* turn off beep */ - snd_hda_codec_write_cache(beep->codec, beep->nid, 0, + snd_hda_codec_write(beep->codec, beep->nid, 0, AC_VERB_SET_BEEP_CONTROL, 0); } if (beep->mode == HDA_BEEP_MODE_SWREG) { @@ -239,8 +239,12 @@ int snd_hda_attach_beep_device(struct hda_codec *codec, int nid) mutex_init(&beep->mutex); if (beep->mode == HDA_BEEP_MODE_ON) { - beep->enabled = 1; - snd_hda_do_register(&beep->register_work); + int err = snd_hda_do_attach(beep); + if (err < 0) { + kfree(beep); + codec->beep = NULL; + return err; + } } return 0; @@ -253,7 +257,7 @@ void snd_hda_detach_beep_device(struct hda_codec *codec) if (beep) { cancel_work_sync(&beep->register_work); cancel_delayed_work(&beep->unregister_work); - if (beep->enabled) + if (beep->dev) snd_hda_do_detach(beep); codec->beep = NULL; kfree(beep); diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 9cfdb771928..f98b47cd6cf 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1086,11 +1086,6 @@ int snd_hda_codec_configure(struct hda_codec *codec) if (err < 0) return err; } - /* audio codec should override the mixer name */ - if (codec->afg || !*codec->bus->card->mixername) - snprintf(codec->bus->card->mixername, - sizeof(codec->bus->card->mixername), - "%s %s", codec->vendor_name, codec->chip_name); if (is_generic_config(codec)) { err = snd_hda_parse_generic_codec(codec); @@ -1109,6 +1104,11 @@ int snd_hda_codec_configure(struct hda_codec *codec) patched: if (!err && codec->patch_ops.unsol_event) err = init_unsol_queue(codec->bus); + /* audio codec should override the mixer name */ + if (!err && (codec->afg || !*codec->bus->card->mixername)) + snprintf(codec->bus->card->mixername, + sizeof(codec->bus->card->mixername), + "%s %s", codec->vendor_name, codec->chip_name); return err; } EXPORT_SYMBOL_HDA(snd_hda_codec_configure); @@ -1327,11 +1327,13 @@ EXPORT_SYMBOL_HDA(snd_hda_query_pin_caps); */ u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid) { - u32 pincap = snd_hda_query_pin_caps(codec, nid); - - if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */ - snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0); + u32 pincap; + if (!codec->no_trigger_sense) { + pincap = snd_hda_query_pin_caps(codec, nid); + if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */ + snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0); + } return snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0); } diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 1d541b7f554..0a770a28e71 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -817,6 +817,7 @@ struct hda_codec { unsigned int pin_amp_workaround:1; /* pin out-amp takes index * (e.g. Conexant codecs) */ + unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */ #ifdef CONFIG_SND_HDA_POWER_SAVE unsigned int power_on :1; /* current (global) power-state */ unsigned int power_transition :1; /* power-state in transition */ diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 9b56f937913..ec9c348336c 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -356,6 +356,7 @@ struct azx_dev { */ unsigned char stream_tag; /* assigned stream */ unsigned char index; /* stream index */ + int device; /* last device number assigned to */ unsigned int opened :1; unsigned int running :1; @@ -1441,10 +1442,13 @@ static int __devinit azx_codec_configure(struct azx *chip) */ /* assign a stream for the PCM */ -static inline struct azx_dev *azx_assign_device(struct azx *chip, int stream) +static inline struct azx_dev * +azx_assign_device(struct azx *chip, struct snd_pcm_substream *substream) { int dev, i, nums; - if (stream == SNDRV_PCM_STREAM_PLAYBACK) { + struct azx_dev *res = NULL; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { dev = chip->playback_index_offset; nums = chip->playback_streams; } else { @@ -1453,10 +1457,15 @@ static inline struct azx_dev *azx_assign_device(struct azx *chip, int stream) } for (i = 0; i < nums; i++, dev++) if (!chip->azx_dev[dev].opened) { - chip->azx_dev[dev].opened = 1; - return &chip->azx_dev[dev]; + res = &chip->azx_dev[dev]; + if (res->device == substream->pcm->device) + break; } - return NULL; + if (res) { + res->opened = 1; + res->device = substream->pcm->device; + } + return res; } /* release the assigned stream */ @@ -1505,7 +1514,7 @@ static int azx_pcm_open(struct snd_pcm_substream *substream) int err; mutex_lock(&chip->open_mutex); - azx_dev = azx_assign_device(chip, substream->stream); + azx_dev = azx_assign_device(chip, substream); if (azx_dev == NULL) { mutex_unlock(&chip->open_mutex); return -EBUSY; @@ -2322,6 +2331,7 @@ static void __devinit check_probe_mask(struct azx *chip, int dev) * white/black-list for enable_msi */ static struct snd_pci_quirk msi_black_list[] __devinitdata = { + SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */ {} }; diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 1a36137e13e..69a941c7b15 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -1186,6 +1186,8 @@ static int patch_ad1986a(struct hda_codec *codec) */ spec->multiout.no_share_stream = 1; + codec->no_trigger_sense = 1; + return 0; } @@ -1371,6 +1373,8 @@ static int patch_ad1983(struct hda_codec *codec) codec->patch_ops = ad198x_patch_ops; + codec->no_trigger_sense = 1; + return 0; } @@ -1813,6 +1817,9 @@ static int patch_ad1981(struct hda_codec *codec) codec->patch_ops.unsol_event = ad1981_hp_unsol_event; break; } + + codec->no_trigger_sense = 1; + return 0; } @@ -3118,6 +3125,8 @@ static int patch_ad1988(struct hda_codec *codec) #endif spec->vmaster_nid = 0x04; + codec->no_trigger_sense = 1; + return 0; } @@ -3330,6 +3339,8 @@ static int patch_ad1884(struct hda_codec *codec) codec->patch_ops = ad198x_patch_ops; + codec->no_trigger_sense = 1; + return 0; } @@ -4287,6 +4298,8 @@ static int patch_ad1884a(struct hda_codec *codec) break; } + codec->no_trigger_sense = 1; + return 0; } @@ -4623,6 +4636,9 @@ static int patch_ad1882(struct hda_codec *codec) spec->mixers[2] = ad1882_6stack_mixers; break; } + + codec->no_trigger_sense = 1; + return 0; } diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 4b200da1bd1..fe0423c3959 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -66,6 +66,7 @@ struct cs_spec { /* available models */ enum { CS420X_MBP55, + CS420X_IMAC27, CS420X_AUTO, CS420X_MODELS }; @@ -827,7 +828,8 @@ static void cs_automute(struct hda_codec *codec) AC_VERB_SET_PIN_WIDGET_CONTROL, hp_present ? 0 : PIN_OUT); } - if (spec->board_config == CS420X_MBP55) { + if (spec->board_config == CS420X_MBP55 || + spec->board_config == CS420X_IMAC27) { unsigned int gpio = hp_present ? 0x02 : 0x08; snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, gpio); @@ -1069,12 +1071,14 @@ static int cs_parse_auto_config(struct hda_codec *codec) static const char *cs420x_models[CS420X_MODELS] = { [CS420X_MBP55] = "mbp55", + [CS420X_IMAC27] = "imac27", [CS420X_AUTO] = "auto", }; static struct snd_pci_quirk cs420x_cfg_tbl[] = { SND_PCI_QUIRK(0x10de, 0xcb79, "MacBookPro 5,5", CS420X_MBP55), + SND_PCI_QUIRK(0x8086, 0x7270, "IMac 27 Inch", CS420X_IMAC27), {} /* terminator */ }; @@ -1097,8 +1101,23 @@ static struct cs_pincfg mbp55_pincfgs[] = { {} /* terminator */ }; +static struct cs_pincfg imac27_pincfgs[] = { + { 0x09, 0x012b4050 }, + { 0x0a, 0x90100140 }, + { 0x0b, 0x90100142 }, + { 0x0c, 0x018b3020 }, + { 0x0d, 0x90a00110 }, + { 0x0e, 0x400000f0 }, + { 0x0f, 0x01cbe030 }, + { 0x10, 0x014be060 }, + { 0x12, 0x01ab9070 }, + { 0x15, 0x400000f0 }, + {} /* terminator */ +}; + static struct cs_pincfg *cs_pincfgs[CS420X_MODELS] = { [CS420X_MBP55] = mbp55_pincfgs, + [CS420X_IMAC27] = imac27_pincfgs, }; static void fix_pincfg(struct hda_codec *codec, int model) @@ -1128,6 +1147,7 @@ static int patch_cs420x(struct hda_codec *codec) fix_pincfg(codec, spec->board_config); switch (spec->board_config) { + case CS420X_IMAC27: case CS420X_MBP55: /* GPIO1 = headphones */ /* GPIO3 = speakers */ diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 3d59f832584..2291a839681 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2104,6 +2104,7 @@ static unsigned int ref9205_pin_configs[12] = { 10280204 1028021F 10280228 (Dell Vostro 1500) + 10280229 (Dell Vostro 1700) */ static unsigned int dell_9205_m42_pin_configs[12] = { 0x0321101F, 0x03A11020, 0x400003FA, 0x90170310, @@ -2189,6 +2190,8 @@ static struct snd_pci_quirk stac9205_cfg_tbl[] = { "Dell Inspiron", STAC_9205_DELL_M44), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0228, "Dell Vostro 1500", STAC_9205_DELL_M42), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0229, + "Dell Vostro 1700", STAC_9205_DELL_M42), /* Gateway */ SND_PCI_QUIRK(0x107b, 0x0560, "Gateway T6834c", STAC_9205_EAPD), SND_PCI_QUIRK(0x107b, 0x0565, "Gateway T1616", STAC_9205_EAPD), @@ -3779,15 +3782,16 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out err = snd_hda_attach_beep_device(codec, nid); if (err < 0) return err; - /* IDT/STAC codecs have linear beep tone parameter */ - codec->beep->linear_tone = 1; - /* if no beep switch is available, make its own one */ - caps = query_amp_caps(codec, nid, HDA_OUTPUT); - if (codec->beep && - !((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT)) { - err = stac92xx_beep_switch_ctl(codec); - if (err < 0) - return err; + if (codec->beep) { + /* IDT/STAC codecs have linear beep tone parameter */ + codec->beep->linear_tone = 1; + /* if no beep switch is available, make its own one */ + caps = query_amp_caps(codec, nid, HDA_OUTPUT); + if (!(caps & AC_AMPCAP_MUTE)) { + err = stac92xx_beep_switch_ctl(codec); + if (err < 0) + return err; + } } } #endif @@ -4449,14 +4453,7 @@ static inline int get_pin_presence(struct hda_codec *codec, hda_nid_t nid) { if (!nid) return 0; - /* NOTE: we can't use snd_hda_jack_detect() here because STAC/IDT - * codecs behave wrongly when SET_PIN_SENSE is triggered, although - * the pincap gives TRIG_REQ bit. - */ - if (snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0) & - AC_PINSENSE_PRESENCE) - return 1; - return 0; + return snd_hda_jack_detect(codec, nid); } static void stac92xx_line_out_detect(struct hda_codec *codec, @@ -4958,6 +4955,7 @@ static int patch_stac9200(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac9200_pin_nids); spec->pin_nids = stac9200_pin_nids; @@ -5020,6 +5018,7 @@ static int patch_stac925x(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac925x_pin_nids); spec->pin_nids = stac925x_pin_nids; @@ -5104,6 +5103,7 @@ static int patch_stac92hd73xx(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; codec->slave_dig_outs = stac92hd73xx_slave_dig_outs; spec->num_pins = ARRAY_SIZE(stac92hd73xx_pin_nids); @@ -5251,6 +5251,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs; spec->digbeep_nid = 0x21; @@ -5414,6 +5415,7 @@ static int patch_stac92hd71bxx(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; codec->patch_ops = stac92xx_patch_ops; spec->num_pins = STAC92HD71BXX_NUM_PINS; @@ -5657,6 +5659,7 @@ static int patch_stac922x(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac922x_pin_nids); spec->pin_nids = stac922x_pin_nids; @@ -5760,6 +5763,7 @@ static int patch_stac927x(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; codec->slave_dig_outs = stac927x_slave_dig_outs; spec->num_pins = ARRAY_SIZE(stac927x_pin_nids); @@ -5894,6 +5898,7 @@ static int patch_stac9205(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac9205_pin_nids); spec->pin_nids = stac9205_pin_nids; @@ -6049,6 +6054,7 @@ static int patch_stac9872(struct hda_codec *codec) spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac9872_pin_nids); spec->pin_nids = stac9872_pin_nids; diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 0ac1215dcd9..e237bf61512 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -463,7 +463,8 @@ static int ac97_write(struct snd_soc_codec *codec, unsigned int reg, { u16 *cache = codec->reg_cache; - soc_ac97_ops.write(codec->ac97, reg, val); + if (reg < 0x7c) + soc_ac97_ops.write(codec->ac97, reg, val); reg = reg >> 1; if (reg < (ARRAY_SIZE(wm9712_reg))) cache[reg] = val; diff --git a/sound/soc/imx/mx27vis_wm8974.c b/sound/soc/imx/mx27vis_wm8974.c index 0267d2d9168..07d2a248438 100644 --- a/sound/soc/imx/mx27vis_wm8974.c +++ b/sound/soc/imx/mx27vis_wm8974.c @@ -180,7 +180,8 @@ static int mx27vis_hifi_hw_free(struct snd_pcm_substream *substream) struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; /* disable the PLL */ - return codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, 0, 0); + return codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, IGNORED_ARG, + 0, 0); } /* diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 9c49c11c43c..42813b80838 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -876,7 +876,7 @@ static int fsi_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!res || !irq) { + if (!res || (int)irq <= 0) { dev_err(&pdev->dev, "Not enough FSI platform resources.\n"); ret = -ENODEV; goto exit; diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 4390d225686..652a470b5f7 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -343,13 +343,18 @@ LIB_H += util/include/linux/string.h LIB_H += util/include/linux/types.h LIB_H += util/include/asm/asm-offsets.h LIB_H += util/include/asm/bitops.h +LIB_H += util/include/asm/bug.h LIB_H += util/include/asm/byteorder.h LIB_H += util/include/asm/swab.h LIB_H += util/include/asm/system.h LIB_H += util/include/asm/uaccess.h LIB_H += perf.h +LIB_H += util/cache.h +LIB_H += util/callchain.h +LIB_H += util/debug.h LIB_H += util/debugfs.h LIB_H += util/event.h +LIB_H += util/exec_cmd.h LIB_H += util/types.h LIB_H += util/levenshtein.h LIB_H += util/parse-options.h @@ -362,6 +367,7 @@ LIB_H += util/session.h LIB_H += util/strbuf.h LIB_H += util/string.h LIB_H += util/strlist.h +LIB_H += util/svghelper.h LIB_H += util/run-command.h LIB_H += util/sigchain.h LIB_H += util/symbol.h @@ -370,6 +376,8 @@ LIB_H += util/values.h LIB_H += util/sort.h LIB_H += util/hist.h LIB_H += util/thread.h +LIB_H += util/trace-event.h +LIB_H += util/trace-event-perl.h LIB_H += util/probe-finder.h LIB_H += util/probe-event.h diff --git a/tools/perf/builtin-buildid-list.c b/tools/perf/builtin-buildid-list.c index e693e6777af..1e99ac80691 100644 --- a/tools/perf/builtin-buildid-list.c +++ b/tools/perf/builtin-buildid-list.c @@ -17,7 +17,7 @@ static char const *input_name = "perf.data"; static int force; -static const char *const buildid_list_usage[] = { +static const char * const buildid_list_usage[] = { "perf buildid-list [<options>]", NULL }; diff --git a/tools/perf/builtin-diff.c b/tools/perf/builtin-diff.c index 4d33b55d558..bd71b8ceafb 100644 --- a/tools/perf/builtin-diff.c +++ b/tools/perf/builtin-diff.c @@ -189,8 +189,9 @@ out_delete: return ret; } -static const char *const diff_usage[] = { +static const char * const diff_usage[] = { "perf diff [<options>] [old_file] [new_file]", + NULL, }; static const struct option options[] = { diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index fc21ad79dd8..7ceb7416c31 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -137,7 +137,7 @@ static void insert_alloc_stat(unsigned long call_site, unsigned long ptr, if (data && data->ptr == ptr) { data->hit++; data->bytes_req += bytes_req; - data->bytes_alloc += bytes_req; + data->bytes_alloc += bytes_alloc; } else { data = malloc(sizeof(*data)); if (!data) @@ -177,7 +177,7 @@ static void insert_caller_stat(unsigned long call_site, if (data && data->call_site == call_site) { data->hit++; data->bytes_req += bytes_req; - data->bytes_alloc += bytes_req; + data->bytes_alloc += bytes_alloc; } else { data = malloc(sizeof(*data)); if (!data) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 63136d0534d..26542532273 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -402,7 +402,7 @@ static void atexit_header(void) perf_header__write(&session->header, output, true); } -static int __cmd_record(int argc __used, const char **argv) +static int __cmd_record(int argc, const char **argv) { int i, counter; struct stat st; @@ -411,6 +411,7 @@ static int __cmd_record(int argc __used, const char **argv) int err; unsigned long waking = 0; int child_ready_pipe[2], go_pipe[2]; + const bool forks = target_pid == -1 && argc > 0; char buf; page_size = sysconf(_SC_PAGE_SIZE); @@ -422,7 +423,7 @@ static int __cmd_record(int argc __used, const char **argv) signal(SIGCHLD, sig_handler); signal(SIGINT, sig_handler); - if (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0) { + if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) { perror("failed to create pipes"); exit(-1); } @@ -483,7 +484,7 @@ static int __cmd_record(int argc __used, const char **argv) atexit(atexit_header); - if (target_pid == -1) { + if (forks) { pid = fork(); if (pid < 0) { perror("failed to fork"); @@ -550,7 +551,7 @@ static int __cmd_record(int argc __used, const char **argv) return err; } - if (!system_wide) + if (!system_wide && profile_cpu == -1) event__synthesize_thread(pid, process_synthesized_event, session); else @@ -569,7 +570,8 @@ static int __cmd_record(int argc __used, const char **argv) /* * Let the child rip */ - close(go_pipe[1]); + if (forks) + close(go_pipe[1]); for (;;) { int hits = samples; @@ -667,7 +669,7 @@ int cmd_record(int argc, const char **argv, const char *prefix __used) argc = parse_options(argc, argv, options, record_usage, PARSE_OPT_STOP_AT_NON_OPTION); - if (!argc && target_pid == -1 && (!system_wide || profile_cpu == -1)) + if (!argc && target_pid == -1 && !system_wide && profile_cpu == -1) usage_with_options(record_usage, options); symbol__init(); diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 5c2ab5357ec..db10c0e8eca 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -294,8 +294,7 @@ setup: return 0; } -//static const char * const report_usage[] = { -const char * const report_usage[] = { +static const char * const report_usage[] = { "perf report [<options>] <command>", NULL }; diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index e2285e28720..574a215e800 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -512,7 +512,7 @@ static char *get_script_path(const char *script_root, const char *suffix) return path; } -static const char * const annotate_usage[] = { +static const char * const trace_usage[] = { "perf trace [<options>] <command>", NULL }; @@ -581,7 +581,7 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used) setup_scripting(); - argc = parse_options(argc, argv, options, annotate_usage, + argc = parse_options(argc, argv, options, trace_usage, PARSE_OPT_STOP_AT_NON_OPTION); if (symbol__init() < 0) diff --git a/tools/perf/design.txt b/tools/perf/design.txt index f000c30877a..8d0de5130db 100644 --- a/tools/perf/design.txt +++ b/tools/perf/design.txt @@ -21,7 +21,7 @@ There's one file descriptor per virtual counter used. The special file descriptor is opened via the perf_event_open() system call: - int sys_perf_event_open(struct perf_event_hw_event *hw_event_uptr, + int sys_perf_event_open(struct perf_event_attr *hw_event_uptr, pid_t pid, int cpu, int group_fd, unsigned long flags); @@ -32,9 +32,9 @@ can be used to set the blocking mode, etc. Multiple counters can be kept open at a time, and the counters can be poll()ed. -When creating a new counter fd, 'perf_event_hw_event' is: +When creating a new counter fd, 'perf_event_attr' is: -struct perf_event_hw_event { +struct perf_event_attr { /* * The MSB of the config word signifies if the rest contains cpu * specific (raw) counter configuration data, if unset, the next @@ -399,7 +399,7 @@ Notification of new events is possible through poll()/select()/epoll() and fcntl() managing signals. Normally a notification is generated for every page filled, however one can -additionally set perf_event_hw_event.wakeup_events to generate one every +additionally set perf_event_attr.wakeup_events to generate one every so many counter overflow events. Future work will include a splice() interface to the ring-buffer. diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c index fd9c097b760..f73de631e3e 100644 --- a/virt/kvm/assigned-dev.c +++ b/virt/kvm/assigned-dev.c @@ -508,8 +508,8 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, struct kvm_assigned_dev_kernel *match; struct pci_dev *dev; - down_read(&kvm->slots_lock); mutex_lock(&kvm->lock); + down_read(&kvm->slots_lock); match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head, assigned_dev->assigned_dev_id); @@ -573,8 +573,8 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, } out: - mutex_unlock(&kvm->lock); up_read(&kvm->slots_lock); + mutex_unlock(&kvm->lock); return r; out_list_del: list_del(&match->list); @@ -585,8 +585,8 @@ out_put: pci_dev_put(dev); out_free: kfree(match); - mutex_unlock(&kvm->lock); up_read(&kvm->slots_lock); + mutex_unlock(&kvm->lock); return r; } diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index b5af8816761..a944be392d6 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -64,7 +64,7 @@ MODULE_LICENSE("GPL"); /* * Ordering of locks: * - * kvm->slots_lock --> kvm->lock --> kvm->irq_lock + * kvm->lock --> kvm->slots_lock --> kvm->irq_lock */ DEFINE_SPINLOCK(kvm_lock); @@ -406,8 +406,11 @@ static struct kvm *kvm_create_vm(void) out: return kvm; +#if defined(KVM_COALESCED_MMIO_PAGE_OFFSET) || \ + (defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)) out_err: hardware_disable_all(); +#endif out_err_nodisable: kfree(kvm); return ERR_PTR(r); |