260 files changed, 4080 insertions, 3553 deletions

diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt
index 83009fdcbbc..2e2c2ea90ce 100644
--- a/Documentation/driver-model/platform.txt
+++ b/Documentation/driver-model/platform.txt
@@ -169,3 +169,62 @@ three different ways to find such a match:
       be probed later if another device registers.  (Which is OK, since
       this interface is only for use with non-hotpluggable devices.)
 
+
+Early Platform Devices and Drivers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The early platform interfaces provide platform data to platform device
+drivers early on during the system boot. The code is built on top of the
+early_param() command line parsing and can be executed very early on.
+
+Example: "earlyprintk" class early serial console in 6 steps
+
+1. Registering early platform device data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code registers platform device data using the function
+early_platform_add_devices(). In the case of early serial console this
+should be hardware configuration for the serial port. Devices registered
+at this point will later on be matched against early platform drivers.
+
+2. Parsing kernel command line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls parse_early_param() to parse the kernel
+command line. This will execute all matching early_param() callbacks.
+User specified early platform devices will be registered at this point.
+For the early serial console case the user can specify port on the
+kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
+the class string, "serial" is the name of the platfrom driver and
+0 is the platform device id. If the id is -1 then the dot and the
+id can be omitted.
+
+3. Installing early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code may optionally force registration of all early
+platform drivers belonging to a certain class using the function
+early_platform_driver_register_all(). User specified devices from
+step 2 have priority over these. This step is omitted by the serial
+driver example since the early serial driver code should be disabled
+unless the user has specified port on the kernel command line.
+
+4. Early platform driver registration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Compiled-in platform drivers making use of early_platform_init() are
+automatically registered during step 2 or 3. The serial driver example
+should use early_platform_init("earlyprintk", &platform_driver).
+
+5. Probing of early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls early_platform_driver_probe() to match
+registered early platform devices associated with a certain class with
+registered early platform drivers. Matched devices will get probed().
+This step can be executed at any point during the early boot. As soon
+as possible may be good for the serial port case.
+
+6. Inside the early platform driver probe()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver code needs to take special care during early boot, especially
+when it comes to memory allocation and interrupt registration. The code
+in the probe() function can use is_early_platform_device() to check if
+it is called at early platform device or at the regular platform device
+time. The early serial driver performs register_console() at this point.
+
+For further information, see <linux/platform_device.h>.
diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt
index 6d6db60d567..dcf83358716 100644
--- a/Documentation/filesystems/pohmelfs/design_notes.txt
+++ b/Documentation/filesystems/pohmelfs/design_notes.txt
@@ -56,9 +56,10 @@ workloads and can fully utilize the bandwidth to the servers when doing bulk
 data transfers.
 
 POHMELFS clients operate with a working set of servers and are capable of balancing read-only
-operations (like lookups or directory listings) between them.
+operations (like lookups or directory listings) between them according to IO priorities.
 Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers.
+in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
+with write permission turned on. IO priority and permissions can be changed in run-time.
 
 POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
 One can select any kernel supported cipher, encryption mode, hash type and operation mode
diff --git a/Documentation/filesystems/pohmelfs/info.txt b/Documentation/filesystems/pohmelfs/info.txt
index 4e3d5015708..db2e4139362 100644
--- a/Documentation/filesystems/pohmelfs/info.txt
+++ b/Documentation/filesystems/pohmelfs/info.txt
@@ -1,6 +1,8 @@
 POHMELFS usage information.
 
-Mount options:
+Mount options.
+All but index, number of crypto threads and maximum IO size can changed via remount.
+
 idx=%u
  Each mountpoint is associated with a special index via this option.
  Administrator can add or remove servers from the given index, so all mounts,
@@ -52,16 +54,27 @@ mcache_timeout=%u
 
 Usage examples.
 
-Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx
+Add server server1.net:1025 into the working set with index $idx
 with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
-$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
+$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
 
 Mount filesystem with given index $idx to /mnt mountpoint.
 Client will connect to all servers specified in the working set via previous command:
 mount -t pohmel -o idx=$idx q /mnt
 
-One can add or remove servers from working set after mounting too.
+Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw):
+$cfg A modify -a server1.net -p 1025 -i $idx -I 1
+
+Change IO priority to 123 (node with the highest priority gets read requests).
+$cfg A modify -a server1.net -p 1025 -i $idx -P 123
 
+One can check currect status of all connections in the mountstats file:
+# cat /proc/$PID/mountstats
+...
+device none mounted on /mnt with fstype pohmel
+idx addr(:port) socket_type protocol active priority permissions
+0 server1.net:1026 1 6 1 250 1
+0 server2.net:1025 1 6 1 123 3
 
 Server installation.
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6172e4360f6..a19f021f081 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -134,7 +134,7 @@ and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
 
-	acpi=		[HW,ACPI,X86-64,i386]
+	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
 			Format: { force | off | ht | strict | noirq | rsdt }
 			force -- enable ACPI if default was off
@@ -218,7 +218,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			acpi_osi="!string2"	# remove built-in string2
 			acpi_osi=		# disable all strings
 
-	acpi_pm_good	[X86-32,X86-64]
+	acpi_pm_good	[X86]
 			Override the pmtimer bug detection: force the kernel
 			to assume that this machine's pmtimer latches its value
 			and always returns good values.
@@ -459,7 +459,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			Also note the kernel might malfunction if you disable
 			some critical bits.
 
-	code_bytes	[IA32/X86_64] How many bytes of object code to print
+	code_bytes	[X86] How many bytes of object code to print
 			in an oops report.
 			Range: 0 - 8192
 			Default: 64
@@ -592,7 +592,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			MTRR settings.  This parameter disables that behavior,
 			possibly causing your machine to run very slowly.
 
-	disable_timer_pin_1 [i386,x86-64]
+	disable_timer_pin_1 [X86]
 			Disable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs.
 
@@ -624,7 +624,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			UART at the specified I/O port or MMIO address.
 			The options are the same as for ttyS, above.
 
-	earlyprintk=	[X86-32,X86-64,SH,BLACKFIN]
+	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=dbgp
@@ -659,7 +659,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/block/as-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 
-	elfcorehdr=	[IA64,PPC,SH,X86-32,X86_64]
+	elfcorehdr=	[IA64,PPC,SH,X86]
 			Specifies physical address of start of kernel core
 			image elf header. Generally kexec loader will
 			pass this option to capture kernel.
@@ -938,7 +938,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See comment before marvel_specify_io7 in
 			arch/alpha/kernel/core_marvel.c.
 
-	io_delay=	[X86-32,X86-64] I/O delay method
+	io_delay=	[X86] I/O delay method
 		0x80
 			Standard port 0x80 based delay
 		0xed
@@ -1000,7 +1000,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	keepinitrd	[HW,ARM]
 
-	kernelcore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
+	kernelcore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
 			specifies the amount of memory usable by the kernel
 			for non-movable allocations.  The requested amount is
 			spread evenly throughout all nodes in the system. The
@@ -1034,7 +1034,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
 
-	kstack=N	[X86-32,X86-64] Print N words from the kernel stack
+	kstack=N	[X86] Print N words from the kernel stack
 			in oops dumps.
 
 	l2cr=		[PPC]
@@ -1044,7 +1044,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	lapic		[X86-32,APIC] Enable the local APIC even if BIOS
 			disabled it.
 
-	lapic_timer_c2_ok	[X86-32,x86-64,APIC] trust the local apic timer
+	lapic_timer_c2_ok	[X86,APIC] trust the local apic timer
 			in C2 power state.
 
 	libata.dma=	[LIBATA] DMA control
@@ -1229,7 +1229,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			[KNL,SH] Allow user to override the default size for
 			per-device physically contiguous DMA buffers.
 
-	memmap=exactmap	[KNL,X86-32,X86_64] Enable setting of an exact
+	memmap=exactmap	[KNL,X86] Enable setting of an exact
 			E820 memory map, as specified by the user.
 			Such memmap=exactmap lines can be constructed based on
 			BIOS output or other requirements. See the memmap=nn@ss
@@ -1320,7 +1320,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	mousedev.yres=	[MOUSE] Vertical screen resolution, used for devices
 			reporting absolute coordinates, such as tablets
 
-	movablecore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
+	movablecore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
 			is similar to kernelcore except it specifies the
 			amount of memory used for migratable allocations.
 			If both kernelcore and movablecore is specified,
@@ -1422,7 +1422,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]
 
-	nmi_watchdog=	[KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
+	nmi_watchdog=	[KNL,BUGS=X86] Debugging features for SMP kernels
 			Format: [panic,][num]
 			Valid num: 0,1,2
 			0 - turn nmi_watchdog off
@@ -1475,11 +1475,11 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nodsp		[SH] Disable hardware DSP at boot time.
 
-	noefi		[X86-32,X86-64] Disable EFI runtime services support.
+	noefi		[X86] Disable EFI runtime services support.
 
 	noexec		[IA-64]
 
-	noexec		[X86-32,X86-64]
+	noexec		[X86]
 			On X86-32 available only on PAE configured kernels.
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
@@ -1525,7 +1525,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	noirqdebug	[X86-32] Disables the code which attempts to detect and
 			disable unhandled interrupt sources.
 
-	no_timer_check	[X86-32,X86_64,APIC] Disables the code which tests for
+	no_timer_check	[X86,APIC] Disables the code which tests for
 			broken timer IRQ sources.
 
 	noisapnp	[ISAPNP] Disables ISA PnP code.
@@ -1689,7 +1689,7 @@ and is between 256 and 4096 characters. It is defined in the file
 				disable the use of PCIE advanced error reporting.
 		nodomains	[PCI] Disable support for multiple PCI
 				root domains (aka PCI segments, in ACPI-speak).
-		nommconf	[X86-32,X86_64] Disable use of MMCONFIG for PCI
+		nommconf	[X86] Disable use of MMCONFIG for PCI
 				Configuration
 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
 				enabled, this kernel boot option can be used to
@@ -2380,7 +2380,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			reported either.
 
 	unknown_nmi_panic
-			[X86-32,X86-64]
+			[X86]
 			Set unknown_nmi_panic=1 early on boot.
 
 	usbcore.autosuspend=
@@ -2447,12 +2447,12 @@ and is between 256 and 4096 characters. It is defined in the file
 					medium is write-protected).
 			Example: quirks=0419:aaf5:rl,0421:0433:rc
 
-	vdso=		[X86-32,SH,x86-64]
+	vdso=		[X86,SH]
 			vdso=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso=1: enable VDSO (default)
 			vdso=0: disable VDSO mapping
 
-	vdso32=		[X86-32,X86-64]
+	vdso32=		[X86]
 			vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso32=1: enable 32-bit VDSO (default)
 			vdso32=0: disable 32-bit VDSO mapping
diff --git a/MAINTAINERS b/MAINTAINERS
index abbedb658c2..0beac8a7f8f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -543,6 +543,14 @@ S:	Maintained
 F:	arch/arm/lib/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
+ARM PORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/
+
 ARM PRIMECELL MMCI PL180/1 DRIVER
 S:	Orphan
 F:	drivers/mmc/host/mmci.*
@@ -592,6 +600,13 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/CLKDEV SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+F:	arch/arm/common/clkdev.c
+F:	arch/arm/include/asm/clkdev.h
+
 ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
 P:	Mike Rapoport
 M:	mike@compulab.co.il
@@ -610,6 +625,15 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:	git git://gitorious.org/linux-gemini/mainline.git
 S:	Maintained
 
+ARM/EBSA110 MACHINE SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/mach-ebsa110/
+F:	drivers/net/arm/am79c961a.*
+
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
 P:	Daniel Ribeiro
 M:	drwyrm@gmail.com
@@ -627,6 +651,15 @@ M:	paulius.zaleckas@teltonika.lt
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/FOOTBRIDGE ARCHITECTURE
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/include/asm/hardware/dec21285.h
+F:	arch/arm/mach-footbridge/
+
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
 P:	Sascha Hauer
 M:	kernel@pengutronix.de
@@ -767,19 +800,27 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/RISCPC ARCHITECTURE
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/common/time-acorn.c
+F:	arch/arm/include/asm/hardware/entry-macro-iomd.S
+F:	arch/arm/include/asm/hardware/ioc.h
+F:	arch/arm/include/asm/hardware/iomd.h
+F:	arch/arm/include/asm/hardware/memc.h
+F:	arch/arm/mach-rpc/
+F:	drivers/net/arm/ether*
+F:	drivers/scsi/arm/
+
 ARM/SHARK MACHINE SUPPORT
 P:	Alexander Schulz
 M:	alex@shark-linux.de
 W:	http://www.shark-linux.de/shark.html
 S:	Maintained
 
-ARM/STRONGARM110 PORT
-P:	Russell King
-M:	rmk@arm.linux.org.uk
-L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
-W:	http://www.arm.linux.org.uk/
-S:	Maintained
-
 ARM/S3C2410 ARM ARCHITECTURE
 P:	Ben Dooks
 M:	ben-linux@fluff.org
@@ -813,6 +854,14 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://www.mcuos.com
 S:	Maintained
 
+ARM/VFP SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/vfp/
+
 ARPD SUPPORT
 P:	Jonathan Layes
 L:	netdev@vger.kernel.org
@@ -1372,6 +1421,11 @@ S:	Maintained
 F:	Documentation/input/cs461x.txt
 F:	sound/pci/cs46xx/
 
+CLK API
+P:	Russell King
+M:	linux@arm.linux.org.uk
+F:	include/linux/clk.h
+
 CODA FILE SYSTEM
 P:	Jan Harkes
 M:	jaharkes@cs.cmu.edu
@@ -1576,7 +1630,8 @@ F:	drivers/infiniband/hw/cxgb3/
 
 CYBERPRO FB DRIVER
 P:	Russell King
-M:	rmk@arm.linux.org.uk
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	drivers/video/cyber2000fb.*
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index ecf0bfbab10..b2a781d9ce0 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -85,12 +85,11 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 
 	for (i = 0; i < 32; i++) {
-		unsigned int irq = irq_start + i;
-
-		set_irq_chip(irq, &vic_chip);
-		set_irq_chip_data(irq, base);
-
 		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
 			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig
deleted file mode 100644
index bcd95b8dd2d..00000000000
--- a/arch/arm/configs/imx27ads_defconfig
+++ /dev/null
@@ -1,826 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:29:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
-CONFIG_MACH_MX27=y
-
-#
-# MX2 Platforms
-#
-CONFIG_MACH_MX27ADS=y
-# CONFIG_MACH_PCM038 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_FEC_OLD is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_IMX is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx1_defconfig
index e05271753e1..0200d67e30b 100644
--- a/arch/arm/configs/mx31ads_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:21:11 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr  8 11:11:33 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -43,15 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -59,26 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -88,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -119,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -129,11 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -145,55 +150,55 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_MX1ADS=y
 
 #
 # Freescale MXC Implementations
 #
+CONFIG_ARCH_MX1=y
 # CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
+# CONFIG_ARCH_MX3 is not set
 
 #
-# MX3 Options
+# MX1 platforms:
 #
-CONFIG_MACH_MX31ADS=y
-# CONFIG_MACH_PCM037 is not set
+CONFIG_MACH_MXLADS=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MXC_IRQ_PRIOR=y
+# CONFIG_MXC_PWM is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
 CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 
@@ -203,7 +208,7 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_OUTER_CACHE is not set
 
 #
@@ -220,25 +225,32 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -251,30 +263,41 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
 # CONFIG_KEXEC is not set
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
 #
 # At least one emulation must be selected
 #
-CONFIG_VFP=y
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -283,11 +306,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -306,12 +324,11 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -324,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -333,7 +351,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -344,14 +364,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -366,16 +380,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -399,36 +413,31 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
+# CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -446,17 +455,15 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -476,23 +483,51 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -502,7 +537,10 @@ CONFIG_MII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -542,46 +580,124 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
 
 #
 # SPI GPIO expanders:
 #
-# CONFIG_W1 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -604,36 +720,131 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# Sound
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_IMX=y
+CONFIG_USB_IMX=y
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
 #
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -643,6 +854,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -660,15 +876,13 @@ CONFIG_INOTIFY_USER=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -687,25 +901,30 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -724,9 +943,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -734,8 +953,31 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -743,15 +985,28 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -766,7 +1021,7 @@ CONFIG_CRYPTO=y
 #
 # Block modes
 #
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
 # CONFIG_CRYPTO_ECB is not set
@@ -785,8 +1040,12 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -803,7 +1062,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
@@ -816,24 +1075,31 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_HW is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/mx27_defconfig
index 41429a00f58..083516cd0d7 100644
--- a/arch/arm/configs/pcm038_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:38:36 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr  8 10:18:06 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -40,47 +40,58 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -88,11 +99,10 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +110,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -119,7 +127,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -129,11 +137,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -145,46 +152,44 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
 #
+# CONFIG_ARCH_MX1 is not set
 CONFIG_ARCH_MX2=y
 # CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
+# CONFIG_MACH_MX21 is not set
 CONFIG_MACH_MX27=y
 
 #
-# MX2 Platforms
+# MX2 platforms:
 #
-# CONFIG_MACH_MX27ADS is not set
+CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
 
 #
 # Processor Type
@@ -209,6 +214,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
 # CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -224,25 +230,32 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -255,30 +268,44 @@ CONFIG_CMDLINE=""
 # CONFIG_KEXEC is not set
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
 #
 # At least one emulation must be selected
 #
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
 # CONFIG_VFP is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -293,7 +320,7 @@ CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 # CONFIG_IP_PNP_BOOTP is not set
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
@@ -323,6 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -332,26 +360,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -366,12 +391,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -426,9 +454,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -452,6 +478,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -477,7 +508,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -491,12 +522,20 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_FEC_OLD=y
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -505,7 +544,10 @@ CONFIG_FEC_OLD=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -541,12 +583,15 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -559,6 +604,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -573,42 +619,55 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -622,47 +681,83 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -683,7 +778,7 @@ CONFIG_VIDEO_MEDIA=y
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=y
 CONFIG_MEDIA_TUNER_TDA8290=y
 CONFIG_MEDIA_TUNER_TDA9887=y
@@ -692,16 +787,17 @@ CONFIG_MEDIA_TUNER_TEA5767=y
 CONFIG_MEDIA_TUNER_MT20XX=y
 CONFIG_MEDIA_TUNER_XC2028=y
 CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
 CONFIG_VIDEO_V4L2=y
 CONFIG_VIDEO_V4L1=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
 # CONFIG_SOC_CAMERA is not set
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
@@ -714,9 +810,10 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -732,8 +829,12 @@ CONFIG_FB=y
 #
 # Frame buffer hardware drivers
 #
+CONFIG_FB_IMX=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -761,14 +862,29 @@ CONFIG_FONT_8x8=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -800,42 +916,56 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -844,6 +974,11 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -861,15 +996,13 @@ CONFIG_RTC_DRV_PCF8563=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -889,25 +1022,27 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -972,12 +1107,41 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -985,24 +1149,26 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx3_defconfig
index 4f41c413568..72a8201a537 100644
--- a/arch/arm/configs/mx31litekit_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,17 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 14:23:39 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr  8 11:06:37 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -43,11 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -55,27 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -85,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -97,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -116,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -126,11 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -142,46 +150,54 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
 #
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
 CONFIG_ARCH_MX3=y
+CONFIG_ARCH_MX31=y
 
 #
-# MX3 Options
+# MX3 platforms:
 #
-# CONFIG_MACH_MX31ADS is not set
+CONFIG_MACH_MX31ADS=y
+CONFIG_MACH_MX31ADS_WM1133_EV1=y
+CONFIG_MACH_PCM037=y
 CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
 CONFIG_CPU_PABRT_NOIFAR=y
@@ -200,45 +216,50 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
 #
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA is not set
-
-#
-# PC-card bridges
-#
+# CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -251,33 +272,42 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
 # CONFIG_KEXEC is not set
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
 #
 # At least one emulation must be selected
 #
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_SUSPEND is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -286,11 +316,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -309,12 +334,11 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -327,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -336,7 +361,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -347,14 +374,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -369,18 +390,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -404,36 +423,31 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
+# CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -451,18 +465,15 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -476,63 +487,58 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -541,16 +547,10 @@ CONFIG_MII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# USB Network Adapters
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -562,43 +562,7 @@ CONFIG_MII=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
@@ -609,10 +573,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 #
 # Character devices
 #
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -624,45 +585,132 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# Watchdog Device Drivers
+# Memory mapped GPIO expanders:
 #
-# CONFIG_SOFT_WATCHDOG is not set
 
 #
-# USB-based Watchdog Cards
+# I2C GPIO expanders:
 #
-# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 
 #
-# Sonics Silicon Backplane
+# PCI GPIO expanders:
 #
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8350=y
+CONFIG_MFD_WM8350_CONFIG_MODE_0=y
+CONFIG_MFD_WM8352_CONFIG_MODE_0=y
+CONFIG_MFD_WM8350_I2C=y
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -673,7 +721,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 CONFIG_VIDEO_DEV=y
 CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
 CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
 CONFIG_VIDEO_MEDIA=y
@@ -682,34 +730,38 @@ CONFIG_VIDEO_MEDIA=y
 # Multimedia drivers
 #
 # CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
 CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9M001=y
+CONFIG_SOC_CAMERA_MT9M111=y
+CONFIG_SOC_CAMERA_MT9T031=y
+CONFIG_SOC_CAMERA_MT9V022=y
+CONFIG_SOC_CAMERA_TW9910=y
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_MX3=y
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
@@ -719,9 +771,10 @@ CONFIG_DAB=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -739,131 +792,79 @@ CONFIG_FB=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_FB_MX3=y
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# Miscellaneous USB options
+# MMC/SD/SDIO Card Drivers
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# USB Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
 
 #
-# USB port drivers
+# DMA Devices
 #
-# CONFIG_USB_SERIAL is not set
+CONFIG_MX3_IPU=y
+CONFIG_MX3_IPU_IRQS=4
+CONFIG_DMA_ENGINE=y
 
 #
-# USB Miscellaneous drivers
+# DMA Clients
 #
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_WM8350=y
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -873,6 +874,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -890,15 +896,13 @@ CONFIG_INOTIFY_USER=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -917,25 +921,30 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -954,65 +963,70 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1027,7 +1041,7 @@ CONFIG_CRYPTO=y
 #
 # Block modes
 #
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
 # CONFIG_CRYPTO_ECB is not set
@@ -1046,8 +1060,12 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1064,7 +1082,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
@@ -1077,24 +1095,31 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig
deleted file mode 100644
index 6e37c77c476..00000000000
--- a/arch/arm/configs/pcm037_defconfig
+++ /dev/null
@@ -1,769 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Wed Jun 25 11:52:42 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-CONFIG_MACH_PCM037=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 65a583ee5df..2d58b8fe59b 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,9 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Mon Jul  7 16:59:23 2008
+# Linux kernel version: 2.6.30-rc2
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -41,11 +41,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -54,31 +63,36 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -88,11 +102,11 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +114,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -119,7 +131,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -129,11 +141,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -145,26 +156,38 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 # CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 CONFIG_PLAT_S3C24XX=y
+CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C24XX_DCLK=y
 CONFIG_CPU_S3C244X=y
-# CONFIG_S3C24XX_PWM is not set
+CONFIG_S3C24XX_PWM=y
+CONFIG_S3C24XX_GPIO_EXTRA=128
+CONFIG_S3C24XX_GPIO_EXTRA64=y
+CONFIG_S3C24XX_GPIO_EXTRA128=y
 CONFIG_PM_SIMTEC=y
 CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_S3C24XX_ADC=y
 CONFIG_MACH_SMDK=y
 CONFIG_PLAT_S3C=y
 CONFIG_CPU_LLSERIAL_S3C2410=y
@@ -174,7 +197,8 @@ CONFIG_CPU_LLSERIAL_S3C2440=y
 # Boot options
 #
 # CONFIG_S3C_BOOT_WATCHDOG is not set
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 
 #
 # Power management
@@ -182,6 +206,8 @@ CONFIG_CPU_LLSERIAL_S3C2440=y
 # CONFIG_S3C2410_PM_DEBUG is not set
 # CONFIG_S3C2410_PM_CHECK is not set
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_DEV_HSMMC=y
 
 #
 # S3C2400 Machines
@@ -190,7 +216,6 @@ CONFIG_CPU_S3C2410=y
 CONFIG_CPU_S3C2410_DMA=y
 CONFIG_S3C2410_PM=y
 CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
 CONFIG_SIMTEC_NOR=y
 CONFIG_MACH_BAST_IDE=y
 
@@ -205,7 +230,7 @@ CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
 CONFIG_MACH_AML_M5900=y
 CONFIG_BAST_PC104_IRQ=y
-# CONFIG_MACH_TCT_HAMMER is not set
+CONFIG_MACH_TCT_HAMMER=y
 CONFIG_MACH_VR1000=y
 CONFIG_MACH_QT2410=y
 CONFIG_CPU_S3C2412=y
@@ -215,10 +240,11 @@ CONFIG_S3C2412_PM=y
 #
 # S3C2412 Machines
 #
-# CONFIG_MACH_JIVE is not set
+CONFIG_MACH_JIVE=y
+# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set
 CONFIG_MACH_SMDK2413=y
 CONFIG_MACH_S3C2413=y
-# CONFIG_MACH_SMDK2412 is not set
+CONFIG_MACH_SMDK2412=y
 CONFIG_MACH_VSTMS=y
 CONFIG_CPU_S3C2440=y
 CONFIG_S3C2440_DMA=y
@@ -232,7 +258,7 @@ CONFIG_MACH_RX3715=y
 CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEXCODER_2440=y
 CONFIG_SMDK2440_CPU2440=y
-# CONFIG_MACH_AT2440EVB is not set
+CONFIG_MACH_AT2440EVB=y
 CONFIG_CPU_S3C2442=y
 
 #
@@ -286,25 +312,31 @@ CONFIG_ISA=y
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=200
 # CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -317,6 +349,11 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 # CONFIG_KEXEC is not set
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
@@ -332,6 +369,8 @@ CONFIG_FPE_NWFPE_XP=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -346,10 +385,6 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=m
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -359,11 +394,13 @@ CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -372,15 +409,16 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
 # CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
@@ -388,8 +426,25 @@ CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
 CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=m
@@ -413,12 +468,181 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+# CONFIG_IP_VS_PROTO_TCP is not set
+# CONFIG_IP_VS_PROTO_UDP is not set
+# CONFIG_IP_VS_PROTO_ESP is not set
+# CONFIG_IP_VS_PROTO_AH is not set
+
+#
+# IPVS scheduler
+#
+# CONFIG_IP_VS_RR is not set
+# CONFIG_IP_VS_WRR is not set
+# CONFIG_IP_VS_LC is not set
+# CONFIG_IP_VS_WLC is not set
+# CONFIG_IP_VS_LBLC is not set
+# CONFIG_IP_VS_LBLCR is not set
+# CONFIG_IP_VS_DH is not set
+# CONFIG_IP_VS_SH is not set
+# CONFIG_IP_VS_SED is not set
+# CONFIG_IP_VS_NQ is not set
+
+#
+# IPVS application helper
+#
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -428,8 +652,10 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -451,8 +677,8 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -462,35 +688,26 @@ CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
 
 #
 # Rate control algorithm selection
 #
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
-CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -504,7 +721,9 @@ CONFIG_MAC80211_LEDS=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -513,6 +732,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
@@ -545,7 +765,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
@@ -566,8 +786,6 @@ CONFIG_MTD_ROM=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
-CONFIG_MTD_BAST=y
-CONFIG_MTD_BAST_MAXSIZE=4
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -590,6 +808,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_S3C2410_DEBUG is not set
@@ -602,6 +821,11 @@ CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -620,7 +844,7 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -628,32 +852,40 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_AT25=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_93CX6=m
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_PLATFORM=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -699,6 +931,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -711,11 +945,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_HAVE_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -731,9 +967,14 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-# CONFIG_ENC28J60 is not set
 CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
@@ -742,11 +983,14 @@ CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
 # CONFIG_NET_POCKET is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
 
@@ -755,7 +999,10 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -778,7 +1025,7 @@ CONFIG_NETDEV_10000=y
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -789,7 +1036,7 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -808,20 +1055,88 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+# CONFIG_JOYSTICK_IFORCE_USB is not set
+# CONFIG_JOYSTICK_IFORCE_232 is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
 # CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
 
 #
 # Hardware I/O ports
@@ -831,12 +1146,15 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PARKBD is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -877,14 +1195,17 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 CONFIG_SERIAL_S3C2410=y
 CONFIG_SERIAL_S3C2412=y
 CONFIG_SERIAL_S3C2440=y
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
@@ -892,7 +1213,7 @@ CONFIG_PRINTER=y
 CONFIG_PPDEV=y
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -901,33 +1222,44 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_ELEKTOR is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
 # CONFIG_I2C_PCA_ISA is not set
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -943,6 +1275,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BITBANG=m
 # CONFIG_SPI_BUTTERFLY is not set
+CONFIG_SPI_GPIO=m
 # CONFIG_SPI_LM70_LLP is not set
 CONFIG_SPI_S3C24XX=m
 CONFIG_SPI_S3C24XX_GPIO=m
@@ -950,44 +1283,56 @@ CONFIG_SPI_S3C24XX_GPIO=m
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPI_TLE62X0=m
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
-# CONFIG_DEBUG_GPIO is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1003,10 +1348,16 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -1022,7 +1373,10 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1043,20 +1397,33 @@ CONFIG_S3C2410_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_MFD_SM501_GPIO is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -1065,14 +1432,189 @@ CONFIG_MFD_SM501=y
 #
 # Multimedia core support
 #
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
 
 #
 # Multimedia drivers
 #
-# CONFIG_DAB is not set
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_PP=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_VIDEO_AU0828=m
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+CONFIG_RADIO_RTRACK2=m
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_TYPHOON_PROC_FS=y
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+# CONFIG_DVB_USB_A800 is not set
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+# CONFIG_DVB_USB_GL861 is not set
+# CONFIG_DVB_USB_AU6610 is not set
+# CONFIG_DVB_USB_DIGITV is not set
+# CONFIG_DVB_USB_VP7045 is not set
+# CONFIG_DVB_USB_VP702X is not set
+# CONFIG_DVB_USB_GP8PSK is not set
+# CONFIG_DVB_USB_NOVA_T_USB2 is not set
+# CONFIG_DVB_USB_TTUSB2 is not set
+# CONFIG_DVB_USB_DTT200U is not set
+# CONFIG_DVB_USB_OPERA1 is not set
+CONFIG_DVB_USB_AF9005=m
+# CONFIG_DVB_USB_AF9005_REMOTE is not set
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
 
 #
 # Graphics support
@@ -1082,6 +1624,7 @@ CONFIG_MFD_SM501=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1105,7 +1648,19 @@ CONFIG_FB_S3C2410=y
 # CONFIG_FB_S3C2410_DEBUG is not set
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PWM=m
 
 #
 # Display device support
@@ -1125,11 +1680,54 @@ CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+# CONFIG_SND_USB_CAIAQ_INPUT is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_S3C24XX_SOC=y
+CONFIG_SND_S3C24XX_SOC_I2S=m
+CONFIG_SND_S3C_I2SV2_SOC=m
+CONFIG_SND_S3C2412_SOC_I2S=m
+CONFIG_SND_S3C2443_SOC_AC97=m
+CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
+CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
+CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
+CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=m
+CONFIG_SND_SOC_L3=m
+CONFIG_SND_SOC_UDA134X=m
+CONFIG_SND_SOC_WM8750=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1139,12 +1737,12 @@ CONFIG_HID=y
 # USB Input Devices
 #
 # CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB HID Boot Protocol drivers
+# Special HID drivers
 #
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
+CONFIG_HID_APPLE=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1161,19 +1759,26 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_U132_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1181,53 +1786,51 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
 CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
 #
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
 
 #
 # USB port drivers
 #
-# CONFIG_USB_USS720 is not set
+CONFIG_USB_USS720=m
 CONFIG_USB_SERIAL=y
 # CONFIG_USB_SERIAL_CONSOLE is not set
 # CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
@@ -1251,42 +1854,71 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 CONFIG_USB_SERIAL_OPTION=m
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
 #
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
 CONFIG_USB_LD=m
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+CONFIG_MMC_TEST=m
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SPI=m
+CONFIG_MMC_S3C=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 
@@ -1295,7 +1927,14 @@ CONFIG_LEDS_CLASS=m
 #
 CONFIG_LEDS_S3C24XX=m
 CONFIG_LEDS_H1940=m
-# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_DAC124S085=m
+CONFIG_LEDS_PWM=m
+CONFIG_LEDS_BD2802=m
 
 #
 # LED Triggers
@@ -1304,7 +1943,13 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 # CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1335,31 +1980,43 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_S3C=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1370,27 +2027,40 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+# CONFIG_EXT4_FS_SECURITY is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -1416,15 +2086,13 @@ CONFIG_NTFS_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1444,27 +2112,49 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1546,6 +2236,11 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1565,14 +2260,39 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1586,19 +2306,29 @@ CONFIG_DEBUG_S3C_UART=0
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
 CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -1630,10 +2360,14 @@ CONFIG_CRYPTO_HMAC=m
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1663,23 +2397,37 @@ CONFIG_CRYPTO_DES=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 857f1dfac79..321c83e43a1 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -36,6 +36,8 @@
 struct mmu_gather {
 	struct mm_struct	*mm;
 	unsigned int		fullmm;
+	unsigned long		range_start;
+	unsigned long		range_end;
 };
 
 DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -63,7 +65,19 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
 	put_cpu_var(mmu_gathers);
 }
 
-#define tlb_remove_tlb_entry(tlb,ptep,address)	do { } while (0)
+/*
+ * Memorize the range for the TLB flush.
+ */
+static inline void
+tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
+{
+	if (!tlb->fullmm) {
+		if (addr < tlb->range_start)
+			tlb->range_start = addr;
+		if (addr + PAGE_SIZE > tlb->range_end)
+			tlb->range_end = addr + PAGE_SIZE;
+	}
+}
 
 /*
  * In the case of tlb vma handling, we can optimise these away in the
@@ -73,15 +87,18 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
 static inline void
 tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
-	if (!tlb->fullmm)
+	if (!tlb->fullmm) {
 		flush_cache_range(vma, vma->vm_start, vma->vm_end);
+		tlb->range_start = TASK_SIZE;
+		tlb->range_end = 0;
+	}
 }
 
 static inline void
 tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
-	if (!tlb->fullmm)
-		flush_tlb_range(vma, vma->vm_start, vma->vm_end);
+	if (!tlb->fullmm && tlb->range_end > 0)
+		flush_tlb_range(vma, tlb->range_start, tlb->range_end);
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 42623db7f87..e04173c7e62 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -83,6 +83,7 @@
 #include <linux/net.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
+#include <linux/slab.h>
 
 struct oldabi_stat64 {
 	unsigned long long st_dev;
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 6d9152de607..ae24486f858 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -100,7 +100,7 @@ static unsigned int last_jiffy_time;
 
 #define TIMER4_TICKS_PER_JIFFY		((CLOCK_TICK_RATE + (HZ/2)) / HZ)
 
-static int ep93xx_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 {
 	__raw_writel(1, EP93XX_TIMER1_CLEAR);
 	while ((signed long)
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 7ae229bc1b7..e54057fb855 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -28,9 +28,7 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/irqs.h>
-#ifdef CONFIG_I2C_IMX
 #include <mach/i2c.h>
-#endif
 #include <mach/iomux.h>
 #include "devices.h"
 
@@ -114,7 +112,6 @@ static struct platform_device flash_device = {
  * I2C
  */
 
-#ifdef CONFIG_I2C_IMX
 static int i2c_pins[] = {
 	PA15_PF_I2C_SDA,
 	PA16_PF_I2C_SCL,
@@ -157,7 +154,6 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
 		.platform_data = &pcf857x_data[1],
 	},
 };
-#endif
 
 /*
  * Board init
@@ -172,12 +168,10 @@ static void __init mx1ads_init(void)
 	mxc_register_device(&flash_device, &mx1ads_flash_data);
 
 	/* I2C */
-#ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(0, mx1ads_i2c_devices,
 				ARRAY_SIZE(mx1ads_i2c_devices));
 
 	mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
-#endif
 }
 
 static void __init mx1ads_timer_init(void)
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 2dee5c87614..999d013e06e 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -919,19 +919,19 @@ static struct clk_lookup lookups[] __initdata = {
 	_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
 	_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
 	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
-	_REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0])
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
 	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
 	_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
-	_REGISTER_CLOCK(NULL, "nfc", nfc_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 	_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
 	_REGISTER_CLOCK(NULL, "brom", brom_clk)
 	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
 	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
-	_REGISTER_CLOCK(NULL, "i2c", i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
 	_REGISTER_CLOCK(NULL, "owire", owire_clk)
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index d6235583e97..194b8428bba 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -19,6 +19,8 @@ config MACH_MX31ADS
 config MACH_MX31ADS_WM1133_EV1
 	bool "Support Wolfson Microelectronics 1133-EV1 module"
 	depends on MACH_MX31ADS
+	depends on MFD_WM8350_I2C
+	depends on REGULATOR_WM8350
 	select MFD_WM8350_CONFIG_MODE_0
 	select MFD_WM8352_CONFIG_MODE_0
 	help
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 83e5e8e1276..a6d6efefa6a 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -102,7 +102,7 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int uart_pins[] = {
+static unsigned int uart_pins[] = {
 	MX31_PIN_CTS1__CTS1,
 	MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1,
@@ -452,6 +452,8 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
 
 	wm8350->codec.platform_data = &imx32ads_wm8350_setup;
 
+	regulator_has_full_constraints();
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c3648eff513..b5227d837b2 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -226,10 +226,10 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
-	/* SMSC9215 IRQ pin */
+	/* LAN9217 IRQ pin */
 	if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
 				"pcm037-eth"))
-		gpio_direction_input(MX31_PIN_GPIO3_1);
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
 
 #ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(1, pcm037_i2c_devices,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 6c4283cec6f..5a01e48fd8f 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -251,32 +251,6 @@ static void __init qong_init_fpga(void)
 }
 
 /*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc qong_io_desc[] __initdata = {
-	{
-		.virtual = AIPS1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length = AIPS1_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
-		.virtual = AIPS2_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length = AIPS2_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init qong_map_io(void)
-{
-	mxc_map_io();
-	iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc));
-}
-
-/*
  * Board specific initialization.
  */
 static void __init mxc_board_init(void)
@@ -305,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = qong_map_io,
+	.map_io         = mxc_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &qong_timer,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 67611dadb44..bc0f73fbd4c 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -28,7 +28,6 @@
 #include <linux/spi/libertas_spi.h>
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
-#include <linux/delay.h>
 
 #include <media/soc_camera.h>
 
@@ -644,8 +643,9 @@ static struct pxa2xx_spi_master em_x270_spi_info = {
 };
 
 static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
-	.rx_threshold = 1,
-	.tx_threshold = 1,
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.gpio_cs	= -1,
 };
 
 static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 3465268ca71..485fede83d9 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -15,6 +15,9 @@ extern struct sys_timer pxa_timer;
 extern void __init pxa_init_irq(int irq_nr,
 				int (*set_wake)(unsigned int, unsigned int));
 extern void __init pxa25x_init_irq(void);
+#ifdef CONFIG_CPU_PXA26x
+extern void __init pxa26x_init_irq(void);
+#endif
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 90230c6f992..a88d7caff0d 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -10,13 +10,13 @@
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
 #else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
 #endif
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 extern void colibri_pxa3xx_init_lcd(int bl_pin);
 #else
-static inline void colibri_pxa3xx_init_lcd(int) {}
+static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
 #endif
 
 #if defined(CONFIG_AX88796)
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 052bfe788ad..d15662aba00 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -37,7 +37,6 @@
 
 /* USB */
 #define GPIO_NR_PALMT5_USB_DETECT_N		15
-#define GPIO_NR_PALMT5_USB_POWER		95
 #define GPIO_NR_PALMT5_USB_PULLUP		93
 
 /* LCD/BACKLIGHT */
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 9f7d62fb4cb..e74082c872e 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -38,7 +38,6 @@
 
 /* USB */
 #define GPIO_NR_PALMTX_USB_DETECT_N		13
-#define GPIO_NR_PALMTX_USB_POWER		95
 #define GPIO_NR_PALMTX_USB_PULLUP		93
 
 /* LCD/BACKLIGHT */
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 0680f1a575a..d7f81068c61 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
 
 	/* IrDA */
 	GPIO40_GPIO,	/* ir disable */
@@ -72,7 +73,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
 
 	/* USB */
 	GPIO15_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb power */
+	GPIO93_GPIO,	/* usb power */
 
 	/* MATRIX KEYPAD */
 	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
@@ -344,7 +345,7 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = {
 static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMT5_USB_POWER,
+	.gpio_pullup		= GPIO_NR_PALMT5_USB_PULLUP,
 	.gpio_pullup_inverted	= 0,
 };
 
@@ -490,9 +491,9 @@ static struct platform_device *devices[] __initdata = {
 /* setup udc GPIOs initial state */
 static void __init palmt5_udc_init(void)
 {
-	if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
-		gpio_free(GPIO_NR_PALMT5_USB_POWER);
+	if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
+		gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
 	}
 }
 
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 59d0c1cba55..14393d0ad8b 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -64,6 +64,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
 
 	/* IrDA */
 	GPIO40_GPIO,	/* ir disable */
@@ -75,7 +76,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 
 	/* USB */
 	GPIO13_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb power */
+	GPIO93_GPIO,	/* usb power */
 
 	/* PCMCIA */
 	GPIO48_nPOE,
@@ -359,7 +360,7 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTX_USB_POWER,
+	.gpio_pullup		= GPIO_NR_PALMTX_USB_PULLUP,
 	.gpio_pullup_inverted	= 0,
 };
 
@@ -514,9 +515,9 @@ static void __init palmtx_map_io(void)
 /* setup udc GPIOs initial state */
 static void __init palmtx_udc_init(void)
 {
-	if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
-		gpio_free(GPIO_NR_PALMTX_USB_POWER);
+	if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
+		gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
 	}
 }
 
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 332bd3263ea..8f0d37d43b4 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -52,7 +52,6 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/udc.h>
-#include <plat/iic.h>
 
 static struct map_desc jive_iodesc[] __initdata = {
 };
@@ -278,7 +277,7 @@ __setup("mtdset=", jive_mtdset);
 #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
 #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
 
-struct s3c2410fb_display jive_vgg2432a4_display[] = {
+static struct s3c2410fb_display jive_vgg2432a4_display[] = {
 	[0] = {
 		.width		= LCD_XRES,
 		.height		= LCD_YRES,
@@ -311,7 +310,7 @@ struct s3c2410fb_display jive_vgg2432a4_display[] = {
 #define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
 #define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
 
-struct s3c2410fb_mach_info jive_lcd_config = {
+static struct s3c2410fb_mach_info jive_lcd_config = {
 	.displays	 = jive_vgg2432a4_display,
 	.num_displays	 = ARRAY_SIZE(jive_vgg2432a4_display),
 	.default_display = 0,
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index b05d56e230a..9c6abf9fb54 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -243,7 +243,7 @@ static struct s3c2410_platform_nand anubis_nand_info = {
 
 /* IDE channels */
 
-struct pata_platform_info anubis_ide_platdata = {
+static struct pata_platform_info anubis_ide_platdata = {
 	.ioport_shift	= 5,
 };
 
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 41a00f57e5d..c8a46685ce3 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -413,7 +413,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= osiris_map_io,
-	.init_machine	= osiris_init,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 25f7935576f..7f473e47e4f 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -166,6 +166,10 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
 
+	gpio_request(S3C64XX_GPN(5), "LCD power");
+	gpio_request(S3C64XX_GPF(13), "LCD power");
+	gpio_request(S3C64XX_GPF(15), "LCD power");
+
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index 83fb72c4048..599217b2e13 100644
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -27,6 +27,4 @@ struct imxuart_platform_data {
 	unsigned int flags;
 };
 
-int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata);
-
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index ab838cfe94f..57e927a1fd3 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -518,6 +518,8 @@ enum iomux_pins {
  */
 #define MX31_PIN_CSPI3_MOSI__RXD3	IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI3_MISO__TXD3	IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_SCLK__RTS3	IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_SPI_RDY__CTS3	IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CTS1__CTS1		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
@@ -558,6 +560,16 @@ enum iomux_pins {
 #define MX31_PIN_SD1_DATA0__SD1_DATA0	IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SD1_CLK__SD1_CLK	IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SD1_CMD__SD1_CMD	IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_LD0__LD0		IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_LD1__LD1		IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_LD2__LD2		IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
@@ -585,6 +597,42 @@ enum iomux_pins {
 #define MX31_PIN_D3_SPL__D3_SPL		IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_CLS__D3_CLS		IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_LCS0__GPI03_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_1__GPIO          IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_CLK__SCL		IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3    IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4    IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5    IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6    IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7    IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_CLK__USBOTG_CLK        IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index c02b8fc2d82..518a36504b8 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -45,7 +45,7 @@
 
 #define NR_IRQS			(MXC_IPU_IRQ_START + MX3_IPU_IRQS)
 
-extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
+extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
 /* all normal IRQs can be FIQs */
 #define FIQ_START	0
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index e8c4cf56c24..8b070a041a9 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -54,9 +54,6 @@
 
 #define IRAM_BASE_ADDR          0xFFFFE800	/* internal ram */
 
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS		(6*32 + 16)
-
 /* fixed interrupt numbers */
 #define MXC_INT_USBCTRL         58
 #define MXC_INT_USBCTRL         58
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 6e7578a3514..0fb68a531f5 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -50,23 +50,27 @@
 #define IIM_PROD_REV_SH		3
 #define IIM_PROD_REV_LEN	5
 
-#ifdef CONFIG_MXC_IRQ_PRIOR
-void imx_irq_set_priority(unsigned char irq, unsigned char prio)
+int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
+#ifdef CONFIG_MXC_IRQ_PRIOR
 	unsigned int temp;
 	unsigned int mask = 0x0F << irq % 8 * 4;
 
-	if (irq > 63)
-		return;
+	if (irq >= MXC_INTERNAL_IRQS)
+		return -EINVAL;;
 
 	temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
 	temp &= ~mask;
 	temp |= prio & mask;
 
 	__raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+
+	return 0;
+#else
+	return -ENOSYS;
+#endif
 }
 EXPORT_SYMBOL(imx_irq_set_priority);
-#endif
 
 #ifdef CONFIG_FIQ
 int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c
index 7642b975a99..08044dec973 100644
--- a/arch/arm/plat-s3c/gpio-config.c
+++ b/arch/arm/plat-s3c/gpio-config.c
@@ -13,6 +13,7 @@
 */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
 
@@ -38,6 +39,7 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
 
 	return ret;
 }
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
 
 int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
 {
@@ -56,6 +58,7 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
 
 	return ret;
 }
+EXPORT_SYMBOL(s3c_gpio_setpull);
 
 #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
 int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 6b1b5231511..26f0cec3ac0 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -34,6 +34,7 @@ extern struct platform_device s3c_device_iis;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
 extern struct platform_device s3c_device_hsmmc2;
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 9a5c767e0a4..91adfa71c17 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -100,7 +100,7 @@ static void s3c_adc_dbgshow(struct adc_device *adc)
 		readl(adc->regs + S3C2410_ADCDLY));
 }
 
-void s3c_adc_try(struct adc_device *adc)
+static void s3c_adc_try(struct adc_device *adc)
 {
 	struct s3c_adc_client *next = adc->ts_pend;
 
@@ -190,6 +190,23 @@ EXPORT_SYMBOL_GPL(s3c_adc_register);
 void s3c_adc_release(struct s3c_adc_client *client)
 {
 	/* We should really check that nothing is in progress. */
+	if (adc_dev->cur == client)
+		adc_dev->cur = NULL;
+	if (adc_dev->ts_pend == client)
+		adc_dev->ts_pend = NULL;
+	else {
+		struct list_head *p, *n;
+		struct s3c_adc_client *tmp;
+
+		list_for_each_safe(p, n, &adc_pending) {
+			tmp = list_entry(p, struct s3c_adc_client, pend);
+			if (tmp == client)
+				list_del(&tmp->pend);
+		}
+	}
+
+	if (adc_dev->cur == NULL)
+		s3c_adc_try(adc_dev);
 	kfree(client);
 }
 EXPORT_SYMBOL_GPL(s3c_adc_release);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 94a341aaa4e..5c0491bf738 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,7 +19,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
diff --git a/include/asm-h8300/timer.h b/arch/h8300/include/asm/timer.h
index def80464d38..def80464d38 100644
--- a/include/asm-h8300/timer.h
+++ b/arch/h8300/include/asm/timer.h
diff --git a/include/asm-m32r/Kbuild b/arch/m32r/include/asm/Kbuild
index c68e1680da0..c68e1680da0 100644
--- a/include/asm-m32r/Kbuild
+++ b/arch/m32r/include/asm/Kbuild
diff --git a/include/asm-m32r/addrspace.h b/arch/m32r/include/asm/addrspace.h
index 81782c122da..81782c122da 100644
--- a/include/asm-m32r/addrspace.h
+++ b/arch/m32r/include/asm/addrspace.h
diff --git a/include/asm-m32r/assembler.h b/arch/m32r/include/asm/assembler.h
index 26351539b5f..26351539b5f 100644
--- a/include/asm-m32r/assembler.h
+++ b/arch/m32r/include/asm/assembler.h
diff --git a/include/asm-m32r/atomic.h b/arch/m32r/include/asm/atomic.h
index 2eed30f8408..2eed30f8408 100644
--- a/include/asm-m32r/atomic.h
+++ b/arch/m32r/include/asm/atomic.h
diff --git a/include/asm-m32r/auxvec.h b/arch/m32r/include/asm/auxvec.h
index f76dcc860fa..f76dcc860fa 100644
--- a/include/asm-m32r/auxvec.h
+++ b/arch/m32r/include/asm/auxvec.h
diff --git a/include/asm-m32r/bitops.h b/arch/m32r/include/asm/bitops.h
index aaddf0d5760..aaddf0d5760 100644
--- a/include/asm-m32r/bitops.h
+++ b/arch/m32r/include/asm/bitops.h
diff --git a/include/asm-m32r/bug.h b/arch/m32r/include/asm/bug.h
index 4cc0462c15b..4cc0462c15b 100644
--- a/include/asm-m32r/bug.h
+++ b/arch/m32r/include/asm/bug.h
diff --git a/include/asm-m32r/bugs.h b/arch/m32r/include/asm/bugs.h
index f77214eff13..f77214eff13 100644
--- a/include/asm-m32r/bugs.h
+++ b/arch/m32r/include/asm/bugs.h
diff --git a/include/asm-m32r/byteorder.h b/arch/m32r/include/asm/byteorder.h
index 21855d8b028..21855d8b028 100644
--- a/include/asm-m32r/byteorder.h
+++ b/arch/m32r/include/asm/byteorder.h
diff --git a/include/asm-m32r/cache.h b/arch/m32r/include/asm/cache.h
index 40b3ee98193..40b3ee98193 100644
--- a/include/asm-m32r/cache.h
+++ b/arch/m32r/include/asm/cache.h
diff --git a/include/asm-m32r/cachectl.h b/arch/m32r/include/asm/cachectl.h
index 2aab8f6fff4..2aab8f6fff4 100644
--- a/include/asm-m32r/cachectl.h
+++ b/arch/m32r/include/asm/cachectl.h
diff --git a/include/asm-m32r/cacheflush.h b/arch/m32r/include/asm/cacheflush.h
index 78587c95814..78587c95814 100644
--- a/include/asm-m32r/cacheflush.h
+++ b/arch/m32r/include/asm/cacheflush.h
diff --git a/include/asm-m32r/checksum.h b/arch/m32r/include/asm/checksum.h
index a7a7c4f44ab..a7a7c4f44ab 100644
--- a/include/asm-m32r/checksum.h
+++ b/arch/m32r/include/asm/checksum.h
diff --git a/include/asm-m32r/cputime.h b/arch/m32r/include/asm/cputime.h
index 0a47550df2b..0a47550df2b 100644
--- a/include/asm-m32r/cputime.h
+++ b/arch/m32r/include/asm/cputime.h
diff --git a/include/asm-m32r/current.h b/arch/m32r/include/asm/current.h
index 7859d864f2c..7859d864f2c 100644
--- a/include/asm-m32r/current.h
+++ b/arch/m32r/include/asm/current.h
diff --git a/include/asm-m32r/delay.h b/arch/m32r/include/asm/delay.h
index 9dd9e999ea6..9dd9e999ea6 100644
--- a/include/asm-m32r/delay.h
+++ b/arch/m32r/include/asm/delay.h
diff --git a/include/asm-m32r/device.h b/arch/m32r/include/asm/device.h
index d8f9872b0e2..d8f9872b0e2 100644
--- a/include/asm-m32r/device.h
+++ b/arch/m32r/include/asm/device.h
diff --git a/include/asm-m32r/div64.h b/arch/m32r/include/asm/div64.h
index 6cd978cefb2..6cd978cefb2 100644
--- a/include/asm-m32r/div64.h
+++ b/arch/m32r/include/asm/div64.h
diff --git a/include/asm-m32r/dma.h b/arch/m32r/include/asm/dma.h
index 52f6a22dd23..52f6a22dd23 100644
--- a/include/asm-m32r/dma.h
+++ b/arch/m32r/include/asm/dma.h
diff --git a/include/asm-m32r/elf.h b/arch/m32r/include/asm/elf.h
index 0cc34c94bf2..0cc34c94bf2 100644
--- a/include/asm-m32r/elf.h
+++ b/arch/m32r/include/asm/elf.h
diff --git a/include/asm-m32r/emergency-restart.h b/arch/m32r/include/asm/emergency-restart.h
index 108d8c48e42..108d8c48e42 100644
--- a/include/asm-m32r/emergency-restart.h
+++ b/arch/m32r/include/asm/emergency-restart.h
diff --git a/include/asm-m32r/errno.h b/arch/m32r/include/asm/errno.h
index 777149262aa..777149262aa 100644
--- a/include/asm-m32r/errno.h
+++ b/arch/m32r/include/asm/errno.h
diff --git a/include/asm-m32r/fb.h b/arch/m32r/include/asm/fb.h
index d92e99cd8c8..d92e99cd8c8 100644
--- a/include/asm-m32r/fb.h
+++ b/arch/m32r/include/asm/fb.h
diff --git a/include/asm-m32r/fcntl.h b/arch/m32r/include/asm/fcntl.h
index 46ab12db573..46ab12db573 100644
--- a/include/asm-m32r/fcntl.h
+++ b/arch/m32r/include/asm/fcntl.h
diff --git a/include/asm-m32r/flat.h b/arch/m32r/include/asm/flat.h
index d851cf0c4aa..d851cf0c4aa 100644
--- a/include/asm-m32r/flat.h
+++ b/arch/m32r/include/asm/flat.h
diff --git a/include/asm-m32r/ftrace.h b/arch/m32r/include/asm/ftrace.h
index 40a8c178f10..40a8c178f10 100644
--- a/include/asm-m32r/ftrace.h
+++ b/arch/m32r/include/asm/ftrace.h
diff --git a/include/asm-m32r/futex.h b/arch/m32r/include/asm/futex.h
index 6a332a9f099..6a332a9f099 100644
--- a/include/asm-m32r/futex.h
+++ b/arch/m32r/include/asm/futex.h
diff --git a/include/asm-m32r/hardirq.h b/arch/m32r/include/asm/hardirq.h
index cb8aa762f23..cb8aa762f23 100644
--- a/include/asm-m32r/hardirq.h
+++ b/arch/m32r/include/asm/hardirq.h
diff --git a/include/asm-m32r/hw_irq.h b/arch/m32r/include/asm/hw_irq.h
index 7138537cda0..7138537cda0 100644
--- a/include/asm-m32r/hw_irq.h
+++ b/arch/m32r/include/asm/hw_irq.h
diff --git a/include/asm-m32r/io.h b/arch/m32r/include/asm/io.h
index d06933bd631..d06933bd631 100644
--- a/include/asm-m32r/io.h
+++ b/arch/m32r/include/asm/io.h
diff --git a/include/asm-m32r/ioctl.h b/arch/m32r/include/asm/ioctl.h
index b279fe06dfe..b279fe06dfe 100644
--- a/include/asm-m32r/ioctl.h
+++ b/arch/m32r/include/asm/ioctl.h
diff --git a/include/asm-m32r/ioctls.h b/arch/m32r/include/asm/ioctls.h
index b9f54bb5d7c..b9f54bb5d7c 100644
--- a/include/asm-m32r/ioctls.h
+++ b/arch/m32r/include/asm/ioctls.h
diff --git a/include/asm-m32r/ipcbuf.h b/arch/m32r/include/asm/ipcbuf.h
index 8d2d7c8ffdb..8d2d7c8ffdb 100644
--- a/include/asm-m32r/ipcbuf.h
+++ b/arch/m32r/include/asm/ipcbuf.h
diff --git a/include/asm-m32r/irq.h b/arch/m32r/include/asm/irq.h
index 242028b4d86..242028b4d86 100644
--- a/include/asm-m32r/irq.h
+++ b/arch/m32r/include/asm/irq.h
diff --git a/include/asm-m32r/irq_regs.h b/arch/m32r/include/asm/irq_regs.h
index 3dd9c0b7027..3dd9c0b7027 100644
--- a/include/asm-m32r/irq_regs.h
+++ b/arch/m32r/include/asm/irq_regs.h
diff --git a/include/asm-m32r/kdebug.h b/arch/m32r/include/asm/kdebug.h
index 6ece1b03766..6ece1b03766 100644
--- a/include/asm-m32r/kdebug.h
+++ b/arch/m32r/include/asm/kdebug.h
diff --git a/include/asm-m32r/kmap_types.h b/arch/m32r/include/asm/kmap_types.h
index fa94dc6410e..fa94dc6410e 100644
--- a/include/asm-m32r/kmap_types.h
+++ b/arch/m32r/include/asm/kmap_types.h
diff --git a/include/asm-m32r/linkage.h b/arch/m32r/include/asm/linkage.h
index a9fb151cf64..a9fb151cf64 100644
--- a/include/asm-m32r/linkage.h
+++ b/arch/m32r/include/asm/linkage.h
diff --git a/include/asm-m32r/local.h b/arch/m32r/include/asm/local.h
index 22256d13863..22256d13863 100644
--- a/include/asm-m32r/local.h
+++ b/arch/m32r/include/asm/local.h
diff --git a/include/asm-m32r/m32102.h b/arch/m32r/include/asm/m32102.h
index 52807f8db16..52807f8db16 100644
--- a/include/asm-m32r/m32102.h
+++ b/arch/m32r/include/asm/m32102.h
diff --git a/include/asm-m32r/m32104ut/m32104ut_pld.h b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h
index 2dc89d68b6d..2dc89d68b6d 100644
--- a/include/asm-m32r/m32104ut/m32104ut_pld.h
+++ b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_lan.h b/arch/m32r/include/asm/m32700ut/m32700ut_lan.h
index aae810a4fb2..aae810a4fb2 100644
--- a/include/asm-m32r/m32700ut/m32700ut_lan.h
+++ b/arch/m32r/include/asm/m32700ut/m32700ut_lan.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_lcd.h b/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h
index 4c248907978..4c248907978 100644
--- a/include/asm-m32r/m32700ut/m32700ut_lcd.h
+++ b/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_pld.h b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h
index 57623beb44c..57623beb44c 100644
--- a/include/asm-m32r/m32700ut/m32700ut_pld.h
+++ b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h
diff --git a/include/asm-m32r/m32r.h b/arch/m32r/include/asm/m32r.h
index 214b44b4075..214b44b4075 100644
--- a/include/asm-m32r/m32r.h
+++ b/arch/m32r/include/asm/m32r.h
diff --git a/include/asm-m32r/m32r_mp_fpga.h b/arch/m32r/include/asm/m32r_mp_fpga.h
index 976d2b99591..976d2b99591 100644
--- a/include/asm-m32r/m32r_mp_fpga.h
+++ b/arch/m32r/include/asm/m32r_mp_fpga.h
diff --git a/include/asm-m32r/mappi2/mappi2_pld.h b/arch/m32r/include/asm/mappi2/mappi2_pld.h
index 2624c9db725..2624c9db725 100644
--- a/include/asm-m32r/mappi2/mappi2_pld.h
+++ b/arch/m32r/include/asm/mappi2/mappi2_pld.h
diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/arch/m32r/include/asm/mappi3/mappi3_pld.h
index 451c40ee70a..451c40ee70a 100644
--- a/include/asm-m32r/mappi3/mappi3_pld.h
+++ b/arch/m32r/include/asm/mappi3/mappi3_pld.h
diff --git a/include/asm-m32r/mc146818rtc.h b/arch/m32r/include/asm/mc146818rtc.h
index aa1b7bf84f5..aa1b7bf84f5 100644
--- a/include/asm-m32r/mc146818rtc.h
+++ b/arch/m32r/include/asm/mc146818rtc.h
diff --git a/include/asm-m32r/mman.h b/arch/m32r/include/asm/mman.h
index 516a8973b13..516a8973b13 100644
--- a/include/asm-m32r/mman.h
+++ b/arch/m32r/include/asm/mman.h
diff --git a/include/asm-m32r/mmu.h b/arch/m32r/include/asm/mmu.h
index 150cb92bb66..150cb92bb66 100644
--- a/include/asm-m32r/mmu.h
+++ b/arch/m32r/include/asm/mmu.h
diff --git a/include/asm-m32r/mmu_context.h b/arch/m32r/include/asm/mmu_context.h
index 91909e5dd9d..91909e5dd9d 100644
--- a/include/asm-m32r/mmu_context.h
+++ b/arch/m32r/include/asm/mmu_context.h
diff --git a/include/asm-m32r/mmzone.h b/arch/m32r/include/asm/mmzone.h
index 9f3b5accda8..9f3b5accda8 100644
--- a/include/asm-m32r/mmzone.h
+++ b/arch/m32r/include/asm/mmzone.h
diff --git a/include/asm-m32r/module.h b/arch/m32r/include/asm/module.h
index eb73ee01121..eb73ee01121 100644
--- a/include/asm-m32r/module.h
+++ b/arch/m32r/include/asm/module.h
diff --git a/include/asm-m32r/msgbuf.h b/arch/m32r/include/asm/msgbuf.h
index 0d5a877b813..0d5a877b813 100644
--- a/include/asm-m32r/msgbuf.h
+++ b/arch/m32r/include/asm/msgbuf.h
diff --git a/include/asm-m32r/mutex.h b/arch/m32r/include/asm/mutex.h
index 458c1f7fbc1..458c1f7fbc1 100644
--- a/include/asm-m32r/mutex.h
+++ b/arch/m32r/include/asm/mutex.h
diff --git a/include/asm-m32r/opsput/opsput_lan.h b/arch/m32r/include/asm/opsput/opsput_lan.h
index a5f18dd1ab2..a5f18dd1ab2 100644
--- a/include/asm-m32r/opsput/opsput_lan.h
+++ b/arch/m32r/include/asm/opsput/opsput_lan.h
diff --git a/include/asm-m32r/opsput/opsput_lcd.h b/arch/m32r/include/asm/opsput/opsput_lcd.h
index 369c9f0832a..369c9f0832a 100644
--- a/include/asm-m32r/opsput/opsput_lcd.h
+++ b/arch/m32r/include/asm/opsput/opsput_lcd.h
diff --git a/include/asm-m32r/opsput/opsput_pld.h b/arch/m32r/include/asm/opsput/opsput_pld.h
index 3f11ea1aac2..3f11ea1aac2 100644
--- a/include/asm-m32r/opsput/opsput_pld.h
+++ b/arch/m32r/include/asm/opsput/opsput_pld.h
diff --git a/include/asm-m32r/page.h b/arch/m32r/include/asm/page.h
index c9333089fe1..c9333089fe1 100644
--- a/include/asm-m32r/page.h
+++ b/arch/m32r/include/asm/page.h
diff --git a/include/asm-m32r/param.h b/arch/m32r/include/asm/param.h
index 94c77019604..94c77019604 100644
--- a/include/asm-m32r/param.h
+++ b/arch/m32r/include/asm/param.h
diff --git a/include/asm-m32r/pci.h b/arch/m32r/include/asm/pci.h
index fe785d167db..fe785d167db 100644
--- a/include/asm-m32r/pci.h
+++ b/arch/m32r/include/asm/pci.h
diff --git a/include/asm-m32r/percpu.h b/arch/m32r/include/asm/percpu.h
index e3169301fe6..e3169301fe6 100644
--- a/include/asm-m32r/percpu.h
+++ b/arch/m32r/include/asm/percpu.h
diff --git a/include/asm-m32r/pgalloc.h b/arch/m32r/include/asm/pgalloc.h
index f11a2b909cd..f11a2b909cd 100644
--- a/include/asm-m32r/pgalloc.h
+++ b/arch/m32r/include/asm/pgalloc.h
diff --git a/include/asm-m32r/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h
index bca3475f959..bca3475f959 100644
--- a/include/asm-m32r/pgtable-2level.h
+++ b/arch/m32r/include/asm/pgtable-2level.h
diff --git a/include/asm-m32r/pgtable.h b/arch/m32r/include/asm/pgtable.h
index e6359c566b5..e6359c566b5 100644
--- a/include/asm-m32r/pgtable.h
+++ b/arch/m32r/include/asm/pgtable.h
diff --git a/include/asm-m32r/poll.h b/arch/m32r/include/asm/poll.h
index c98509d3149..c98509d3149 100644
--- a/include/asm-m32r/poll.h
+++ b/arch/m32r/include/asm/poll.h
diff --git a/include/asm-m32r/posix_types.h b/arch/m32r/include/asm/posix_types.h
index b309c585863..b309c585863 100644
--- a/include/asm-m32r/posix_types.h
+++ b/arch/m32r/include/asm/posix_types.h
diff --git a/include/asm-m32r/processor.h b/arch/m32r/include/asm/processor.h
index 1a997fc148a..1a997fc148a 100644
--- a/include/asm-m32r/processor.h
+++ b/arch/m32r/include/asm/processor.h
diff --git a/include/asm-m32r/ptrace.h b/arch/m32r/include/asm/ptrace.h
index a0755b98202..a0755b98202 100644
--- a/include/asm-m32r/ptrace.h
+++ b/arch/m32r/include/asm/ptrace.h
diff --git a/include/asm-m32r/resource.h b/arch/m32r/include/asm/resource.h
index b1ce766e37a..b1ce766e37a 100644
--- a/include/asm-m32r/resource.h
+++ b/arch/m32r/include/asm/resource.h
diff --git a/include/asm-m32r/rtc.h b/arch/m32r/include/asm/rtc.h
index 0340633f3f4..0340633f3f4 100644
--- a/include/asm-m32r/rtc.h
+++ b/arch/m32r/include/asm/rtc.h
diff --git a/include/asm-m32r/s1d13806.h b/arch/m32r/include/asm/s1d13806.h
index 248d36a82d7..248d36a82d7 100644
--- a/include/asm-m32r/s1d13806.h
+++ b/arch/m32r/include/asm/s1d13806.h
diff --git a/include/asm-m32r/scatterlist.h b/arch/m32r/include/asm/scatterlist.h
index 1ed372c73d0..1ed372c73d0 100644
--- a/include/asm-m32r/scatterlist.h
+++ b/arch/m32r/include/asm/scatterlist.h
diff --git a/include/asm-m32r/sections.h b/arch/m32r/include/asm/sections.h
index 5e5d21c4908..5e5d21c4908 100644
--- a/include/asm-m32r/sections.h
+++ b/arch/m32r/include/asm/sections.h
diff --git a/include/asm-m32r/segment.h b/arch/m32r/include/asm/segment.h
index 42b11aeb324..42b11aeb324 100644
--- a/include/asm-m32r/segment.h
+++ b/arch/m32r/include/asm/segment.h
diff --git a/include/asm-m32r/sembuf.h b/arch/m32r/include/asm/sembuf.h
index c9873d6890e..c9873d6890e 100644
--- a/include/asm-m32r/sembuf.h
+++ b/arch/m32r/include/asm/sembuf.h
diff --git a/include/asm-m32r/serial.h b/arch/m32r/include/asm/serial.h
index 5ac244c72f1..5ac244c72f1 100644
--- a/include/asm-m32r/serial.h
+++ b/arch/m32r/include/asm/serial.h
diff --git a/include/asm-m32r/setup.h b/arch/m32r/include/asm/setup.h
index c637ab99239..c637ab99239 100644
--- a/include/asm-m32r/setup.h
+++ b/arch/m32r/include/asm/setup.h
diff --git a/include/asm-m32r/shmbuf.h b/arch/m32r/include/asm/shmbuf.h
index b0cdf0aa7d6..b0cdf0aa7d6 100644
--- a/include/asm-m32r/shmbuf.h
+++ b/arch/m32r/include/asm/shmbuf.h
diff --git a/include/asm-m32r/shmparam.h b/arch/m32r/include/asm/shmparam.h
index 35986d81a52..35986d81a52 100644
--- a/include/asm-m32r/shmparam.h
+++ b/arch/m32r/include/asm/shmparam.h
diff --git a/include/asm-m32r/sigcontext.h b/arch/m32r/include/asm/sigcontext.h
index da4a9c36d09..da4a9c36d09 100644
--- a/include/asm-m32r/sigcontext.h
+++ b/arch/m32r/include/asm/sigcontext.h
diff --git a/include/asm-m32r/siginfo.h b/arch/m32r/include/asm/siginfo.h
index 7d9cd9ebfd0..7d9cd9ebfd0 100644
--- a/include/asm-m32r/siginfo.h
+++ b/arch/m32r/include/asm/siginfo.h
diff --git a/include/asm-m32r/signal.h b/arch/m32r/include/asm/signal.h
index 1a607066bc6..1a607066bc6 100644
--- a/include/asm-m32r/signal.h
+++ b/arch/m32r/include/asm/signal.h
diff --git a/include/asm-m32r/smp.h b/arch/m32r/include/asm/smp.h
index b96a6d2ffbc..b96a6d2ffbc 100644
--- a/include/asm-m32r/smp.h
+++ b/arch/m32r/include/asm/smp.h
diff --git a/include/asm-m32r/socket.h b/arch/m32r/include/asm/socket.h
index be7ed589af5..be7ed589af5 100644
--- a/include/asm-m32r/socket.h
+++ b/arch/m32r/include/asm/socket.h
diff --git a/include/asm-m32r/sockios.h b/arch/m32r/include/asm/sockios.h
index 6c1fb9b43bd..6c1fb9b43bd 100644
--- a/include/asm-m32r/sockios.h
+++ b/arch/m32r/include/asm/sockios.h
diff --git a/include/asm-m32r/spinlock.h b/arch/m32r/include/asm/spinlock.h
index dded923883b..dded923883b 100644
--- a/include/asm-m32r/spinlock.h
+++ b/arch/m32r/include/asm/spinlock.h
diff --git a/include/asm-m32r/spinlock_types.h b/arch/m32r/include/asm/spinlock_types.h
index 83f52105c0e..83f52105c0e 100644
--- a/include/asm-m32r/spinlock_types.h
+++ b/arch/m32r/include/asm/spinlock_types.h
diff --git a/include/asm-m32r/stat.h b/arch/m32r/include/asm/stat.h
index da4518f82d6..da4518f82d6 100644
--- a/include/asm-m32r/stat.h
+++ b/arch/m32r/include/asm/stat.h
diff --git a/include/asm-m32r/statfs.h b/arch/m32r/include/asm/statfs.h
index 6eb4c6007e6..6eb4c6007e6 100644
--- a/include/asm-m32r/statfs.h
+++ b/arch/m32r/include/asm/statfs.h
diff --git a/include/asm-m32r/string.h b/arch/m32r/include/asm/string.h
index e61e2b0bfc1..e61e2b0bfc1 100644
--- a/include/asm-m32r/string.h
+++ b/arch/m32r/include/asm/string.h
diff --git a/include/asm-m32r/swab.h b/arch/m32r/include/asm/swab.h
index 54dab001d6d..54dab001d6d 100644
--- a/include/asm-m32r/swab.h
+++ b/arch/m32r/include/asm/swab.h
diff --git a/include/asm-m32r/syscall.h b/arch/m32r/include/asm/syscall.h
index 25f316f2b78..25f316f2b78 100644
--- a/include/asm-m32r/syscall.h
+++ b/arch/m32r/include/asm/syscall.h
diff --git a/include/asm-m32r/system.h b/arch/m32r/include/asm/system.h
index c980f5ba8de..c980f5ba8de 100644
--- a/include/asm-m32r/system.h
+++ b/arch/m32r/include/asm/system.h
diff --git a/include/asm-m32r/termbits.h b/arch/m32r/include/asm/termbits.h
index bc104008b55..bc104008b55 100644
--- a/include/asm-m32r/termbits.h
+++ b/arch/m32r/include/asm/termbits.h
diff --git a/include/asm-m32r/termios.h b/arch/m32r/include/asm/termios.h
index 93ce79fd342..93ce79fd342 100644
--- a/include/asm-m32r/termios.h
+++ b/arch/m32r/include/asm/termios.h
diff --git a/include/asm-m32r/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 8589d462df2..8589d462df2 100644
--- a/include/asm-m32r/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
diff --git a/include/asm-m32r/timex.h b/arch/m32r/include/asm/timex.h
index bb9fe4feb12..bb9fe4feb12 100644
--- a/include/asm-m32r/timex.h
+++ b/arch/m32r/include/asm/timex.h
diff --git a/include/asm-m32r/tlb.h b/arch/m32r/include/asm/tlb.h
index c7ebd8d48f3..c7ebd8d48f3 100644
--- a/include/asm-m32r/tlb.h
+++ b/arch/m32r/include/asm/tlb.h
diff --git a/include/asm-m32r/tlbflush.h b/arch/m32r/include/asm/tlbflush.h
index 0ef95307784..0ef95307784 100644
--- a/include/asm-m32r/tlbflush.h
+++ b/arch/m32r/include/asm/tlbflush.h
diff --git a/include/asm-m32r/topology.h b/arch/m32r/include/asm/topology.h
index d607eb32bd7..d607eb32bd7 100644
--- a/include/asm-m32r/topology.h
+++ b/arch/m32r/include/asm/topology.h
diff --git a/include/asm-m32r/types.h b/arch/m32r/include/asm/types.h
index bc9f7fff0ac..bc9f7fff0ac 100644
--- a/include/asm-m32r/types.h
+++ b/arch/m32r/include/asm/types.h
diff --git a/include/asm-m32r/uaccess.h b/arch/m32r/include/asm/uaccess.h
index 1c7047bea20..1c7047bea20 100644
--- a/include/asm-m32r/uaccess.h
+++ b/arch/m32r/include/asm/uaccess.h
diff --git a/include/asm-m32r/ucontext.h b/arch/m32r/include/asm/ucontext.h
index 09324741eec..09324741eec 100644
--- a/include/asm-m32r/ucontext.h
+++ b/arch/m32r/include/asm/ucontext.h
diff --git a/include/asm-m32r/unaligned.h b/arch/m32r/include/asm/unaligned.h
index 377eb20d1ec..377eb20d1ec 100644
--- a/include/asm-m32r/unaligned.h
+++ b/arch/m32r/include/asm/unaligned.h
diff --git a/include/asm-m32r/unistd.h b/arch/m32r/include/asm/unistd.h
index cf701c93324..cf701c93324 100644
--- a/include/asm-m32r/unistd.h
+++ b/arch/m32r/include/asm/unistd.h
diff --git a/include/asm-m32r/user.h b/arch/m32r/include/asm/user.h
index 03b3c11c2af..03b3c11c2af 100644
--- a/include/asm-m32r/user.h
+++ b/arch/m32r/include/asm/user.h
diff --git a/include/asm-m32r/vga.h b/arch/m32r/include/asm/vga.h
index a1b63061c06..a1b63061c06 100644
--- a/include/asm-m32r/vga.h
+++ b/arch/m32r/include/asm/vga.h
diff --git a/include/asm-m32r/xor.h b/arch/m32r/include/asm/xor.h
index 6d525259df3..6d525259df3 100644
--- a/include/asm-m32r/xor.h
+++ b/arch/m32r/include/asm/xor.h
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 924e156a85a..8130334329c 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -506,6 +506,7 @@ config X86_PTRACE_BTS
 	bool "Branch Trace Store"
 	default y
 	depends on X86_DEBUGCTLMSR
+	depends on BROKEN
 	---help---
 	  This adds a ptrace interface to the hardware's branch trace store.
 
diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index 2cd07b9422f..7af14e512f9 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -18,9 +18,5 @@ extern int free_memtype(u64 start, u64 end);
 
 extern int kernel_map_sync_memtype(u64 base, unsigned long size,
 		unsigned long flag);
-extern void map_devmem(unsigned long pfn, unsigned long size,
-		       struct pgprot vma_prot);
-extern void unmap_devmem(unsigned long pfn, unsigned long size,
-			 struct pgprot vma_prot);
 
 #endif /* _ASM_X86_PAT_H */
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 2e0eb414095..98c470c069d 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -380,8 +380,6 @@ static int mc_sysdev_add(struct sys_device *sys_dev)
 		return err;
 
 	err = microcode_init_cpu(cpu);
-	if (err)
-		sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
 
 	return err;
 }
diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 34f12e9996e..221a3853e26 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -50,7 +50,7 @@ static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 	return swiotlb_alloc_coherent(hwdev, size, dma_handle, flags);
 }
 
-struct dma_map_ops swiotlb_dma_ops = {
+static struct dma_map_ops swiotlb_dma_ops = {
 	.mapping_error = swiotlb_dma_mapping_error,
 	.alloc_coherent = x86_swiotlb_alloc_coherent,
 	.free_coherent = swiotlb_free_coherent,
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 09daebfdb11..8a450930834 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -280,15 +280,16 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 		return NULL;
 	area->phys_addr = phys_addr;
 	vaddr = (unsigned long) area->addr;
-	if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
+
+	if (kernel_map_sync_memtype(phys_addr, size, prot_val)) {
 		free_memtype(phys_addr, phys_addr + size);
 		free_vm_area(area);
 		return NULL;
 	}
 
-	if (ioremap_change_attr(vaddr, size, prot_val) < 0) {
+	if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
 		free_memtype(phys_addr, phys_addr + size);
-		vunmap(area->addr);
+		free_vm_area(area);
 		return NULL;
 	}
 
@@ -374,7 +375,8 @@ static void __iomem *ioremap_default(resource_size_t phys_addr,
 	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
 	 * - Inherit from confliting mappings otherwise
 	 */
-	err = reserve_memtype(phys_addr, phys_addr + size, -1, &flags);
+	err = reserve_memtype(phys_addr, phys_addr + size,
+				_PAGE_CACHE_WB, &flags);
 	if (err < 0)
 		return NULL;
 
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index d71e1b636ce..797f9f107cb 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -945,71 +945,94 @@ int _set_memory_uc(unsigned long addr, int numpages)
 
 int set_memory_uc(unsigned long addr, int numpages)
 {
+	int ret;
+
 	/*
 	 * for now UC MINUS. see comments in ioremap_nocache()
 	 */
-	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
-			    _PAGE_CACHE_UC_MINUS, NULL))
-		return -EINVAL;
+	ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+			    _PAGE_CACHE_UC_MINUS, NULL);
+	if (ret)
+		goto out_err;
+
+	ret = _set_memory_uc(addr, numpages);
+	if (ret)
+		goto out_free;
 
-	return _set_memory_uc(addr, numpages);
+	return 0;
+
+out_free:
+	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+out_err:
+	return ret;
 }
 EXPORT_SYMBOL(set_memory_uc);
 
 int set_memory_array_uc(unsigned long *addr, int addrinarray)
 {
-	unsigned long start;
-	unsigned long end;
-	int i;
+	int i, j;
+	int ret;
+
 	/*
 	 * for now UC MINUS. see comments in ioremap_nocache()
 	 */
 	for (i = 0; i < addrinarray; i++) {
-		start = __pa(addr[i]);
-		for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
-			if (end != __pa(addr[i + 1]))
-				break;
-			i++;
-		}
-		if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
-			goto out;
+		ret = reserve_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE,
+					_PAGE_CACHE_UC_MINUS, NULL);
+		if (ret)
+			goto out_free;
 	}
 
-	return change_page_attr_set(addr, addrinarray,
+	ret = change_page_attr_set(addr, addrinarray,
 				    __pgprot(_PAGE_CACHE_UC_MINUS), 1);
-out:
-	for (i = 0; i < addrinarray; i++) {
-		unsigned long tmp = __pa(addr[i]);
-
-		if (tmp == start)
-			break;
-		for (end = tmp + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
-			if (end != __pa(addr[i + 1]))
-				break;
-			i++;
-		}
-		free_memtype(tmp, end);
-	}
-	return -EINVAL;
+	if (ret)
+		goto out_free;
+
+	return 0;
+
+out_free:
+	for (j = 0; j < i; j++)
+		free_memtype(__pa(addr[j]), __pa(addr[j]) + PAGE_SIZE);
+
+	return ret;
 }
 EXPORT_SYMBOL(set_memory_array_uc);
 
 int _set_memory_wc(unsigned long addr, int numpages)
 {
-	return change_page_attr_set(&addr, numpages,
+	int ret;
+	ret = change_page_attr_set(&addr, numpages,
+				    __pgprot(_PAGE_CACHE_UC_MINUS), 0);
+
+	if (!ret) {
+		ret = change_page_attr_set(&addr, numpages,
 				    __pgprot(_PAGE_CACHE_WC), 0);
+	}
+	return ret;
 }
 
 int set_memory_wc(unsigned long addr, int numpages)
 {
+	int ret;
+
 	if (!pat_enabled)
 		return set_memory_uc(addr, numpages);
 
-	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
-		_PAGE_CACHE_WC, NULL))
-		return -EINVAL;
+	ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+		_PAGE_CACHE_WC, NULL);
+	if (ret)
+		goto out_err;
+
+	ret = _set_memory_wc(addr, numpages);
+	if (ret)
+		goto out_free;
+
+	return 0;
 
-	return _set_memory_wc(addr, numpages);
+out_free:
+	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+out_err:
+	return ret;
 }
 EXPORT_SYMBOL(set_memory_wc);
 
@@ -1021,29 +1044,31 @@ int _set_memory_wb(unsigned long addr, int numpages)
 
 int set_memory_wb(unsigned long addr, int numpages)
 {
-	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+	int ret;
+
+	ret = _set_memory_wb(addr, numpages);
+	if (ret)
+		return ret;
 
-	return _set_memory_wb(addr, numpages);
+	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+	return 0;
 }
 EXPORT_SYMBOL(set_memory_wb);
 
 int set_memory_array_wb(unsigned long *addr, int addrinarray)
 {
 	int i;
+	int ret;
 
-	for (i = 0; i < addrinarray; i++) {
-		unsigned long start = __pa(addr[i]);
-		unsigned long end;
-
-		for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
-			if (end != __pa(addr[i + 1]))
-				break;
-			i++;
-		}
-		free_memtype(start, end);
-	}
-	return change_page_attr_clear(addr, addrinarray,
+	ret = change_page_attr_clear(addr, addrinarray,
 				      __pgprot(_PAGE_CACHE_MASK), 1);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < addrinarray; i++)
+		free_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE);
+
+	return 0;
 }
 EXPORT_SYMBOL(set_memory_array_wb);
 
@@ -1136,6 +1161,8 @@ int set_pages_array_wb(struct page **pages, int addrinarray)
 
 	retval = cpa_clear_pages_array(pages, addrinarray,
 			__pgprot(_PAGE_CACHE_MASK));
+	if (retval)
+		return retval;
 
 	for (i = 0; i < addrinarray; i++) {
 		start = (unsigned long)page_address(pages[i]);
@@ -1143,7 +1170,7 @@ int set_pages_array_wb(struct page **pages, int addrinarray)
 		free_memtype(start, end);
 	}
 
-	return retval;
+	return 0;
 }
 EXPORT_SYMBOL(set_pages_array_wb);
 
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index c009a241d56..e6718bb2806 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -182,10 +182,10 @@ static unsigned long pat_x_mtrr_type(u64 start, u64 end, unsigned long req_type)
 		u8 mtrr_type;
 
 		mtrr_type = mtrr_type_lookup(start, end);
-		if (mtrr_type == MTRR_TYPE_UNCACHABLE)
-			return _PAGE_CACHE_UC;
-		if (mtrr_type == MTRR_TYPE_WRCOMB)
-			return _PAGE_CACHE_WC;
+		if (mtrr_type != MTRR_TYPE_WRBACK)
+			return _PAGE_CACHE_UC_MINUS;
+
+		return _PAGE_CACHE_WB;
 	}
 
 	return req_type;
@@ -352,23 +352,13 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		return 0;
 	}
 
-	if (req_type == -1) {
-		/*
-		 * Call mtrr_lookup to get the type hint. This is an
-		 * optimization for /dev/mem mmap'ers into WB memory (BIOS
-		 * tools and ACPI tools). Use WB request for WB memory and use
-		 * UC_MINUS otherwise.
-		 */
-		u8 mtrr_type = mtrr_type_lookup(start, end);
-
-		if (mtrr_type == MTRR_TYPE_WRBACK)
-			actual_type = _PAGE_CACHE_WB;
-		else
-			actual_type = _PAGE_CACHE_UC_MINUS;
-	} else {
-		actual_type = pat_x_mtrr_type(start, end,
-					      req_type & _PAGE_CACHE_MASK);
-	}
+	/*
+	 * Call mtrr_lookup to get the type hint. This is an
+	 * optimization for /dev/mem mmap'ers into WB memory (BIOS
+	 * tools and ACPI tools). Use WB request for WB memory and use
+	 * UC_MINUS otherwise.
+	 */
+	actual_type = pat_x_mtrr_type(start, end, req_type & _PAGE_CACHE_MASK);
 
 	if (new_type)
 		*new_type = actual_type;
@@ -546,9 +536,7 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t *vma_prot)
 {
-	u64 offset = ((u64) pfn) << PAGE_SHIFT;
-	unsigned long flags = -1;
-	int retval;
+	unsigned long flags = _PAGE_CACHE_WB;
 
 	if (!range_is_allowed(pfn, size))
 		return 0;
@@ -576,64 +564,11 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 	}
 #endif
 
-	/*
-	 * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot.
-	 *
-	 * Without O_SYNC, we want to get
-	 * - WB for WB-able memory and no other conflicting mappings
-	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
-	 * - Inherit from confliting mappings otherwise
-	 */
-	if (flags != -1) {
-		retval = reserve_memtype(offset, offset + size, flags, NULL);
-	} else {
-		retval = reserve_memtype(offset, offset + size, -1, &flags);
-	}
-
-	if (retval < 0)
-		return 0;
-
-	if (((pfn < max_low_pfn_mapped) ||
-	     (pfn >= (1UL<<(32 - PAGE_SHIFT)) && pfn < max_pfn_mapped)) &&
-	    ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) {
-		free_memtype(offset, offset + size);
-		printk(KERN_INFO
-		"%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
-			current->comm, current->pid,
-			cattr_name(flags),
-			offset, (unsigned long long)(offset + size));
-		return 0;
-	}
-
 	*vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) |
 			     flags);
 	return 1;
 }
 
-void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
-{
-	unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK);
-	u64 addr = (u64)pfn << PAGE_SHIFT;
-	unsigned long flags;
-
-	reserve_memtype(addr, addr + size, want_flags, &flags);
-	if (flags != want_flags) {
-		printk(KERN_INFO
-		"%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n",
-			current->comm, current->pid,
-			cattr_name(want_flags),
-			addr, (unsigned long long)(addr + size),
-			cattr_name(flags));
-	}
-}
-
-void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
-{
-	u64 addr = (u64)pfn << PAGE_SHIFT;
-
-	free_memtype(addr, addr + size);
-}
-
 /*
  * Change the memory type for the physial address range in kernel identity
  * mapping space if that range is a part of identity map.
@@ -671,8 +606,8 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
 {
 	int is_ram = 0;
 	int ret;
-	unsigned long flags;
 	unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
+	unsigned long flags = want_flags;
 
 	is_ram = pat_pagerange_is_ram(paddr, paddr + size);
 
@@ -734,29 +669,28 @@ static void free_pfn_range(u64 paddr, unsigned long size)
  *
  * If the vma has a linear pfn mapping for the entire range, we get the prot
  * from pte and reserve the entire vma range with single reserve_pfn_range call.
- * Otherwise, we reserve the entire vma range, my ging through the PTEs page
- * by page to get physical address and protection.
  */
 int track_pfn_vma_copy(struct vm_area_struct *vma)
 {
-	int retval = 0;
-	unsigned long i, j;
 	resource_size_t paddr;
 	unsigned long prot;
-	unsigned long vma_start = vma->vm_start;
-	unsigned long vma_end = vma->vm_end;
-	unsigned long vma_size = vma_end - vma_start;
+	unsigned long vma_size = vma->vm_end - vma->vm_start;
 	pgprot_t pgprot;
 
 	if (!pat_enabled)
 		return 0;
 
+	/*
+	 * For now, only handle remap_pfn_range() vmas where
+	 * is_linear_pfn_mapping() == TRUE. Handling of
+	 * vm_insert_pfn() is TBD.
+	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/*
 		 * reserve the whole chunk covered by vma. We need the
 		 * starting address and protection from pte.
 		 */
-		if (follow_phys(vma, vma_start, 0, &prot, &paddr)) {
+		if (follow_phys(vma, vma->vm_start, 0, &prot, &paddr)) {
 			WARN_ON_ONCE(1);
 			return -EINVAL;
 		}
@@ -764,28 +698,7 @@ int track_pfn_vma_copy(struct vm_area_struct *vma)
 		return reserve_pfn_range(paddr, vma_size, &pgprot, 1);
 	}
 
-	/* reserve entire vma page by page, using pfn and prot from pte */
-	for (i = 0; i < vma_size; i += PAGE_SIZE) {
-		if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
-			continue;
-
-		pgprot = __pgprot(prot);
-		retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1);
-		if (retval)
-			goto cleanup_ret;
-	}
 	return 0;
-
-cleanup_ret:
-	/* Reserve error: Cleanup partial reservation and return error */
-	for (j = 0; j < i; j += PAGE_SIZE) {
-		if (follow_phys(vma, vma_start + j, 0, &prot, &paddr))
-			continue;
-
-		free_pfn_range(paddr, PAGE_SIZE);
-	}
-
-	return retval;
 }
 
 /*
@@ -795,50 +708,28 @@ cleanup_ret:
  * prot is passed in as a parameter for the new mapping. If the vma has a
  * linear pfn mapping for the entire range reserve the entire vma range with
  * single reserve_pfn_range call.
- * Otherwise, we look t the pfn and size and reserve only the specified range
- * page by page.
- *
- * Note that this function can be called with caller trying to map only a
- * subrange/page inside the vma.
  */
 int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 			unsigned long pfn, unsigned long size)
 {
-	int retval = 0;
-	unsigned long i, j;
-	resource_size_t base_paddr;
 	resource_size_t paddr;
-	unsigned long vma_start = vma->vm_start;
-	unsigned long vma_end = vma->vm_end;
-	unsigned long vma_size = vma_end - vma_start;
+	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
 	if (!pat_enabled)
 		return 0;
 
+	/*
+	 * For now, only handle remap_pfn_range() vmas where
+	 * is_linear_pfn_mapping() == TRUE. Handling of
+	 * vm_insert_pfn() is TBD.
+	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/* reserve the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
 		return reserve_pfn_range(paddr, vma_size, prot, 0);
 	}
 
-	/* reserve page by page using pfn and size */
-	base_paddr = (resource_size_t)pfn << PAGE_SHIFT;
-	for (i = 0; i < size; i += PAGE_SIZE) {
-		paddr = base_paddr + i;
-		retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0);
-		if (retval)
-			goto cleanup_ret;
-	}
 	return 0;
-
-cleanup_ret:
-	/* Reserve error: Cleanup partial reservation and return error */
-	for (j = 0; j < i; j += PAGE_SIZE) {
-		paddr = base_paddr + j;
-		free_pfn_range(paddr, PAGE_SIZE);
-	}
-
-	return retval;
 }
 
 /*
@@ -849,39 +740,23 @@ cleanup_ret:
 void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
 			unsigned long size)
 {
-	unsigned long i;
 	resource_size_t paddr;
-	unsigned long prot;
-	unsigned long vma_start = vma->vm_start;
-	unsigned long vma_end = vma->vm_end;
-	unsigned long vma_size = vma_end - vma_start;
+	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
 	if (!pat_enabled)
 		return;
 
+	/*
+	 * For now, only handle remap_pfn_range() vmas where
+	 * is_linear_pfn_mapping() == TRUE. Handling of
+	 * vm_insert_pfn() is TBD.
+	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/* free the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
 		free_pfn_range(paddr, vma_size);
 		return;
 	}
-
-	if (size != 0 && size != vma_size) {
-		/* free page by page, using pfn and size */
-		paddr = (resource_size_t)pfn << PAGE_SHIFT;
-		for (i = 0; i < size; i += PAGE_SIZE) {
-			paddr = paddr + i;
-			free_pfn_range(paddr, PAGE_SIZE);
-		}
-	} else {
-		/* free entire vma, page by page, using the pfn from pte */
-		for (i = 0; i < vma_size; i += PAGE_SIZE) {
-			if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
-				continue;
-
-			free_pfn_range(paddr, PAGE_SIZE);
-		}
-	}
 }
 
 pgprot_t pgprot_writecombine(pgprot_t prot)
diff --git a/drivers/base/base.h b/drivers/base/base.h
index ddc97496db4..b528145a078 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -115,7 +115,7 @@ extern int driver_probe_device(struct device_driver *drv, struct device *dev);
 static inline int driver_match_device(struct device_driver *drv,
 				      struct device *dev)
 {
-	return drv->bus->match && drv->bus->match(dev, drv);
+	return drv->bus->match ? drv->bus->match(dev, drv) : 1;
 }
 
 extern void sysdev_shutdown(void);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index e73c92d13a2..d230ff4b3ee 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1142,6 +1142,9 @@ int device_for_each_child(struct device *parent, void *data,
 	struct device *child;
 	int error = 0;
 
+	if (!parent->p)
+		return 0;
+
 	klist_iter_init(&parent->p->klist_children, &i);
 	while ((child = next_device(&i)) && !error)
 		error = fn(child, data);
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index d2198f64ad4..b5b6c973a2e 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -990,6 +990,8 @@ int __init platform_bus_init(void)
 {
 	int error;
 
+	early_platform_cleanup();
+
 	error = device_register(&platform_bus);
 	if (error)
 		return error;
@@ -1020,3 +1022,240 @@ u64 dma_get_required_mask(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dma_get_required_mask);
 #endif
+
+static __initdata LIST_HEAD(early_platform_driver_list);
+static __initdata LIST_HEAD(early_platform_device_list);
+
+/**
+ * early_platform_driver_register
+ * @edrv: early_platform driver structure
+ * @buf: string passed from early_param()
+ */
+int __init early_platform_driver_register(struct early_platform_driver *epdrv,
+					  char *buf)
+{
+	unsigned long index;
+	int n;
+
+	/* Simply add the driver to the end of the global list.
+	 * Drivers will by default be put on the list in compiled-in order.
+	 */
+	if (!epdrv->list.next) {
+		INIT_LIST_HEAD(&epdrv->list);
+		list_add_tail(&epdrv->list, &early_platform_driver_list);
+	}
+
+	/* If the user has specified device then make sure the driver
+	 * gets prioritized. The driver of the last device specified on
+	 * command line will be put first on the list.
+	 */
+	n = strlen(epdrv->pdrv->driver.name);
+	if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) {
+		list_move(&epdrv->list, &early_platform_driver_list);
+
+		if (!strcmp(buf, epdrv->pdrv->driver.name))
+			epdrv->requested_id = -1;
+		else if (buf[n] == '.' && strict_strtoul(&buf[n + 1], 10,
+							 &index) == 0)
+			epdrv->requested_id = index;
+		else
+			epdrv->requested_id = EARLY_PLATFORM_ID_ERROR;
+	}
+
+	return 0;
+}
+
+/**
+ * early_platform_add_devices - add a numbers of early platform devices
+ * @devs: array of early platform devices to add
+ * @num: number of early platform devices in array
+ */
+void __init early_platform_add_devices(struct platform_device **devs, int num)
+{
+	struct device *dev;
+	int i;
+
+	/* simply add the devices to list */
+	for (i = 0; i < num; i++) {
+		dev = &devs[i]->dev;
+
+		if (!dev->devres_head.next) {
+			INIT_LIST_HEAD(&dev->devres_head);
+			list_add_tail(&dev->devres_head,
+				      &early_platform_device_list);
+		}
+	}
+}
+
+/**
+ * early_platform_driver_register_all
+ * @class_str: string to identify early platform driver class
+ */
+void __init early_platform_driver_register_all(char *class_str)
+{
+	/* The "class_str" parameter may or may not be present on the kernel
+	 * command line. If it is present then there may be more than one
+	 * matching parameter.
+	 *
+	 * Since we register our early platform drivers using early_param()
+	 * we need to make sure that they also get registered in the case
+	 * when the parameter is missing from the kernel command line.
+	 *
+	 * We use parse_early_options() to make sure the early_param() gets
+	 * called at least once. The early_param() may be called more than
+	 * once since the name of the preferred device may be specified on
+	 * the kernel command line. early_platform_driver_register() handles
+	 * this case for us.
+	 */
+	parse_early_options(class_str);
+}
+
+/**
+ * early_platform_match
+ * @edrv: early platform driver structure
+ * @id: id to match against
+ */
+static  __init struct platform_device *
+early_platform_match(struct early_platform_driver *epdrv, int id)
+{
+	struct platform_device *pd;
+
+	list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
+		if (platform_match(&pd->dev, &epdrv->pdrv->driver))
+			if (pd->id == id)
+				return pd;
+
+	return NULL;
+}
+
+/**
+ * early_platform_left
+ * @edrv: early platform driver structure
+ * @id: return true if id or above exists
+ */
+static  __init int early_platform_left(struct early_platform_driver *epdrv,
+				       int id)
+{
+	struct platform_device *pd;
+
+	list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
+		if (platform_match(&pd->dev, &epdrv->pdrv->driver))
+			if (pd->id >= id)
+				return 1;
+
+	return 0;
+}
+
+/**
+ * early_platform_driver_probe_id
+ * @class_str: string to identify early platform driver class
+ * @id: id to match against
+ * @nr_probe: number of platform devices to successfully probe before exiting
+ */
+static int __init early_platform_driver_probe_id(char *class_str,
+						 int id,
+						 int nr_probe)
+{
+	struct early_platform_driver *epdrv;
+	struct platform_device *match;
+	int match_id;
+	int n = 0;
+	int left = 0;
+
+	list_for_each_entry(epdrv, &early_platform_driver_list, list) {
+		/* only use drivers matching our class_str */
+		if (strcmp(class_str, epdrv->class_str))
+			continue;
+
+		if (id == -2) {
+			match_id = epdrv->requested_id;
+			left = 1;
+
+		} else {
+			match_id = id;
+			left += early_platform_left(epdrv, id);
+
+			/* skip requested id */
+			switch (epdrv->requested_id) {
+			case EARLY_PLATFORM_ID_ERROR:
+			case EARLY_PLATFORM_ID_UNSET:
+				break;
+			default:
+				if (epdrv->requested_id == id)
+					match_id = EARLY_PLATFORM_ID_UNSET;
+			}
+		}
+
+		switch (match_id) {
+		case EARLY_PLATFORM_ID_ERROR:
+			pr_warning("%s: unable to parse %s parameter\n",
+				   class_str, epdrv->pdrv->driver.name);
+			/* fall-through */
+		case EARLY_PLATFORM_ID_UNSET:
+			match = NULL;
+			break;
+		default:
+			match = early_platform_match(epdrv, match_id);
+		}
+
+		if (match) {
+			if (epdrv->pdrv->probe(match))
+				pr_warning("%s: unable to probe %s early.\n",
+					   class_str, match->name);
+			else
+				n++;
+		}
+
+		if (n >= nr_probe)
+			break;
+	}
+
+	if (left)
+		return n;
+	else
+		return -ENODEV;
+}
+
+/**
+ * early_platform_driver_probe
+ * @class_str: string to identify early platform driver class
+ * @nr_probe: number of platform devices to successfully probe before exiting
+ * @user_only: only probe user specified early platform devices
+ */
+int __init early_platform_driver_probe(char *class_str,
+				       int nr_probe,
+				       int user_only)
+{
+	int k, n, i;
+
+	n = 0;
+	for (i = -2; n < nr_probe; i++) {
+		k = early_platform_driver_probe_id(class_str, i, nr_probe - n);
+
+		if (k < 0)
+			break;
+
+		n += k;
+
+		if (user_only)
+			break;
+	}
+
+	return n;
+}
+
+/**
+ * early_platform_cleanup - clean up early platform code
+ */
+void __init early_platform_cleanup(void)
+{
+	struct platform_device *pd, *pd2;
+
+	/* clean up the devres list used to chain devices */
+	list_for_each_entry_safe(pd, pd2, &early_platform_device_list,
+				 dev.devres_head) {
+		list_del(&pd->dev.devres_head);
+		memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head));
+	}
+}
+
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 69b7f8e7759..689cd27ac89 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1025,6 +1025,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 {
 	struct urb *urb = &sc->work_urb;
 	struct bulk_cs_wrap *bcs;
+	int endp;
 	int len;
 	int rc;
 
@@ -1033,6 +1034,10 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 		return;
 	}
 
+	endp = usb_pipeendpoint(sc->last_pipe);
+	if (usb_pipein(sc->last_pipe))
+		endp |= USB_DIR_IN;
+
 	if (cmd->state == UB_CMDST_CLEAR) {
 		if (urb->status == -EPIPE) {
 			/*
@@ -1048,9 +1053,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 		 * We ignore the result for the halt clear.
 		 */
 
-		/* reset the endpoint toggle */
-		usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
-			usb_pipeout(sc->last_pipe), 0);
+		usb_reset_endpoint(sc->dev, endp);
 
 		ub_state_sense(sc, cmd);
 
@@ -1065,9 +1068,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 		 * We ignore the result for the halt clear.
 		 */
 
-		/* reset the endpoint toggle */
-		usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
-			usb_pipeout(sc->last_pipe), 0);
+		usb_reset_endpoint(sc->dev, endp);
 
 		ub_state_stat(sc, cmd);
 
@@ -1082,9 +1083,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 		 * We ignore the result for the halt clear.
 		 */
 
-		/* reset the endpoint toggle */
-		usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
-			usb_pipeout(sc->last_pipe), 0);
+		usb_reset_endpoint(sc->dev, endp);
 
 		ub_state_stat_counted(sc, cmd);
 
@@ -2119,8 +2118,7 @@ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
 	del_timer_sync(&timer);
 	usb_kill_urb(&sc->work_urb);
 
-	/* reset the endpoint toggle */
-	usb_settoggle(sc->dev, endp, usb_pipeout(sc->last_pipe), 0);
+	usb_reset_endpoint(sc->dev, endp);
 
 	return 0;
 }
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 3586b3b3df3..8f05c38c2f0 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -301,33 +301,7 @@ static inline int private_mapping_ok(struct vm_area_struct *vma)
 }
 #endif
 
-void __attribute__((weak))
-map_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
-{
-	/* nothing. architectures can override. */
-}
-
-void __attribute__((weak))
-unmap_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
-{
-	/* nothing. architectures can override. */
-}
-
-static void mmap_mem_open(struct vm_area_struct *vma)
-{
-	map_devmem(vma->vm_pgoff,  vma->vm_end - vma->vm_start,
-			vma->vm_page_prot);
-}
-
-static void mmap_mem_close(struct vm_area_struct *vma)
-{
-	unmap_devmem(vma->vm_pgoff,  vma->vm_end - vma->vm_start,
-			vma->vm_page_prot);
-}
-
 static struct vm_operations_struct mmap_mem_ops = {
-	.open  = mmap_mem_open,
-	.close = mmap_mem_close,
 #ifdef CONFIG_HAVE_IOREMAP_PROT
 	.access = generic_access_phys
 #endif
@@ -362,7 +336,6 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
 			    vma->vm_pgoff,
 			    size,
 			    vma->vm_page_prot)) {
-		unmap_devmem(vma->vm_pgoff, size, vma->vm_page_prot);
 		return -EAGAIN;
 	}
 	return 0;
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index ebf4be5b7c4..2d175b5928f 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -50,9 +50,8 @@ static LIST_HEAD(gameport_list);
 
 static struct bus_type gameport_bus;
 
-static void gameport_add_driver(struct gameport_driver *drv);
 static void gameport_add_port(struct gameport *gameport);
-static void gameport_destroy_port(struct gameport *gameport);
+static void gameport_attach_driver(struct gameport_driver *drv);
 static void gameport_reconnect_port(struct gameport *gameport);
 static void gameport_disconnect_port(struct gameport *gameport);
 
@@ -230,7 +229,6 @@ static void gameport_find_driver(struct gameport *gameport)
 
 enum gameport_event_type {
 	GAMEPORT_REGISTER_PORT,
-	GAMEPORT_REGISTER_DRIVER,
 	GAMEPORT_ATTACH_DRIVER,
 };
 
@@ -374,8 +372,8 @@ static void gameport_handle_event(void)
 				gameport_add_port(event->object);
 				break;
 
-			case GAMEPORT_REGISTER_DRIVER:
-				gameport_add_driver(event->object);
+			case GAMEPORT_ATTACH_DRIVER:
+				gameport_attach_driver(event->object);
 				break;
 
 			default:
@@ -706,14 +704,14 @@ static int gameport_driver_remove(struct device *dev)
 	return 0;
 }
 
-static void gameport_add_driver(struct gameport_driver *drv)
+static void gameport_attach_driver(struct gameport_driver *drv)
 {
 	int error;
 
-	error = driver_register(&drv->driver);
+	error = driver_attach(&drv->driver);
 	if (error)
 		printk(KERN_ERR
-			"gameport: driver_register() failed for %s, error: %d\n",
+			"gameport: driver_attach() failed for %s, error: %d\n",
 			drv->driver.name, error);
 }
 
diff --git a/drivers/input/input.c b/drivers/input/input.c
index d44065d2e66..935a1835de2 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1549,7 +1549,6 @@ int input_register_handle(struct input_handle *handle)
 		return error;
 	list_add_tail_rcu(&handle->d_node, &dev->h_list);
 	mutex_unlock(&dev->mutex);
-	synchronize_rcu();
 
 	/*
 	 * Since we are supposed to be called from ->connect()
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index f999dc60c3b..444dec07e5d 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -880,7 +880,7 @@ static unsigned int atkbd_hp_zv6100_forced_release_keys[] = {
 };
 
 /*
- * Samsung NC10 with Fn+F? key release not working
+ * Samsung NC10,NC20 with Fn+F? key release not working
  */
 static unsigned int atkbd_samsung_forced_release_keys[] = {
 	0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
@@ -1534,6 +1534,24 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_samsung_forced_release_keys,
 	},
 	{
+		.ident = "Samsung NC20",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
+	{
+		.ident = "Samsung SQ45S70S",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
+	{
 		.ident = "Fujitsu Amilo PA 1510",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index e94b7d735ac..d427f322e20 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -252,7 +252,7 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev)
 	}
 
 	error = request_irq(bf54x_kpad->irq, bfin_kpad_isr,
-				 IRQF_SAMPLE_RANDOM, DRV_NAME, pdev);
+				0, DRV_NAME, pdev);
 	if (error) {
 		printk(KERN_ERR DRV_NAME
 			": unable to claim irq %d; error %d\n",
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 203abac1e23..5c0a631d145 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -214,7 +214,7 @@ config INPUT_SGI_BTNS
 
 config HP_SDC_RTC
 	tristate "HP SDC Real Time Clock"
-	depends on GSC || HP300
+	depends on (GSC || HP300) && SERIO
 	select HP_SDC
 	help
 	  Say Y here if you want to support the built-in real time clock
diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c
index f63995f854f..3941f97cfa6 100644
--- a/drivers/input/mouse/pc110pad.c
+++ b/drivers/input/mouse/pc110pad.c
@@ -108,7 +108,6 @@ static int pc110pad_open(struct input_dev *dev)
  */
 static int __init pc110pad_init(void)
 {
-	struct pci_dev *dev;
 	int err;
 
 	if (!no_pci_devices())
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 83ed2d56b92..fb8a3cd3ffd 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -377,6 +377,24 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 	{ }
 };
 
+static struct dmi_system_id __initdata i8042_dmi_reset_table[] = {
+	{
+		.ident = "MSI Wind U-100",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+		},
+	},
+	{
+		.ident = "LG Electronics X110",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "X110"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
+		},
+	},
+	{ }
+};
+
 #ifdef CONFIG_PNP
 static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
 	{
@@ -386,6 +404,13 @@ static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
 		},
 	},
+	{
+		.ident = "MSI Wind U-100",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+		},
+	},
 	{ }
 };
 #endif
@@ -698,6 +723,9 @@ static int __init i8042_platform_init(void)
 #endif
 
 #ifdef CONFIG_X86
+	if (dmi_check_system(i8042_dmi_reset_table))
+		i8042_reset = 1;
+
 	if (dmi_check_system(i8042_dmi_noloop_table))
 		i8042_noloop = 1;
 
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 170f71ee577..3cffb704e37 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -712,22 +712,43 @@ static int i8042_controller_check(void)
 static int i8042_controller_selftest(void)
 {
 	unsigned char param;
+	int i = 0;
 
 	if (!i8042_reset)
 		return 0;
 
-	if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-		printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
-		return -ENODEV;
-	}
+	/*
+	 * We try this 5 times; on some really fragile systems this does not
+	 * take the first time...
+	 */
+	do {
+
+		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
+			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+			return -ENODEV;
+		}
+
+		if (param == I8042_RET_CTL_TEST)
+			return 0;
 
-	if (param != I8042_RET_CTL_TEST) {
 		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
-			 param, I8042_RET_CTL_TEST);
-		return -EIO;
-	}
+			param, I8042_RET_CTL_TEST);
+		msleep(50);
+	} while (i++ < 5);
 
+#ifdef CONFIG_X86
+	/*
+	 * On x86, we don't fail entire i8042 initialization if controller
+	 * reset fails in hopes that keyboard port will still be functional
+	 * and user will still get a working keyboard. This is especially
+	 * important on netbooks. On other arches we trust hardware more.
+	 */
+	printk(KERN_INFO
+		"i8042: giving up on controller selftest, continuing anyway...\n");
 	return 0;
+#else
+	return -EIO;
+#endif
 }
 
 /*
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index e4728a28f49..ecaeb7e8e75 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -736,8 +736,8 @@ static int __devinit ad7877_probe(struct spi_device *spi)
 
 	/* Request AD7877 /DAV GPIO interrupt */
 
-	err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING |
-			IRQF_SAMPLE_RANDOM, spi->dev.driver->name, ts);
+	err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING,
+			spi->dev.driver->name, ts);
 	if (err) {
 		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
 		goto err_free_mem;
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index ea4c61d6868..5d8a7039880 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -448,8 +448,7 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
 	ad7879_setup(ts);
 
 	err = request_irq(bus->irq, ad7879_irq,
-			  IRQF_TRIGGER_FALLING | IRQF_SAMPLE_RANDOM,
-			  bus->dev.driver->name, ts);
+			  IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts);
 
 	if (err) {
 		dev_err(&bus->dev, "irq %d busy?\n", bus->irq);
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 056ac77e2cf..2b01e56568f 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -127,6 +127,8 @@ struct ads7846 {
 	void			(*filter_cleanup)(void *data);
 	int			(*get_pendown_state)(void);
 	int			gpio_pendown;
+
+	void			(*wait_for_sync)(void);
 };
 
 /* leave chip selected when we're done, for quicker re-select? */
@@ -511,6 +513,10 @@ static int get_pendown_state(struct ads7846 *ts)
 	return !gpio_get_value(ts->gpio_pendown);
 }
 
+static void null_wait_for_sync(void)
+{
+}
+
 /*
  * PENIRQ only kicks the timer.  The timer only reissues the SPI transfer,
  * to retrieve touchscreen status.
@@ -686,6 +692,7 @@ static void ads7846_rx_val(void *ads)
 	default:
 		BUG();
 	}
+	ts->wait_for_sync();
 	status = spi_async(ts->spi, m);
 	if (status)
 		dev_err(&ts->spi->dev, "spi_async --> %d\n",
@@ -723,6 +730,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 	} else {
 		/* pen is still down, continue with the measurement */
 		ts->msg_idx = 0;
+		ts->wait_for_sync();
 		status = spi_async(ts->spi, &ts->msg[0]);
 		if (status)
 			dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
@@ -746,7 +754,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
 			 * that here.  (The "generic irq" framework may help...)
 			 */
 			ts->irq_disabled = 1;
-			disable_irq(ts->spi->irq);
+			disable_irq_nosync(ts->spi->irq);
 			ts->pending = 1;
 			hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
 					HRTIMER_MODE_REL);
@@ -947,6 +955,8 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		ts->penirq_recheck_delay_usecs =
 				pdata->penirq_recheck_delay_usecs;
 
+	ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
+
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
 
 	input_dev->name = "ADS784x Touchscreen";
diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c
index fa67d782c3c..3ffd4c4b170 100644
--- a/drivers/input/touchscreen/da9034-ts.c
+++ b/drivers/input/touchscreen/da9034-ts.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2006-2008 Marvell International Ltd.
  *	Fengwei Yin <fengwei.yin@marvell.com>
+ *	Bin Yang  <bin.yang@marvell.com>
  *	Eric Miao <eric.miao@marvell.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -175,6 +176,16 @@ static void da9034_event_handler(struct da9034_touch *touch, int event)
 			goto err_reset;
 
 		touch->state = STATE_STOP;
+
+		/* FIXME: PEN_{UP/DOWN} events are expected to be
+		 * available by stopping TSI, but this is found not
+		 * always true, delay and simulate such an event
+		 * here is more reliable
+		 */
+		mdelay(1);
+		da9034_event_handler(touch,
+				     is_pen_down(touch) ? EVENT_PEN_DOWN :
+							  EVENT_PEN_UP);
 		break;
 
 	case STATE_STOP:
@@ -189,8 +200,6 @@ static void da9034_event_handler(struct da9034_touch *touch, int event)
 			report_pen_up(touch);
 			touch->state = STATE_IDLE;
 		}
-
-		input_sync(touch->input_dev);
 		break;
 
 	case STATE_WAIT:
@@ -200,8 +209,10 @@ static void da9034_event_handler(struct da9034_touch *touch, int event)
 		if (is_pen_down(touch)) {
 			start_tsi(touch);
 			touch->state = STATE_BUSY;
-		} else
+		} else {
+			report_pen_up(touch);
 			touch->state = STATE_IDLE;
+		}
 		break;
 	}
 	return;
@@ -226,16 +237,12 @@ static int da9034_touch_notifier(struct notifier_block *nb,
 	struct da9034_touch *touch =
 		container_of(nb, struct da9034_touch, notifier);
 
-	if (event & DA9034_EVENT_PEN_DOWN) {
-		if (is_pen_down(touch))
-			da9034_event_handler(touch, EVENT_PEN_DOWN);
-		else
-			da9034_event_handler(touch, EVENT_PEN_UP);
-	}
-
 	if (event & DA9034_EVENT_TSI_READY)
 		da9034_event_handler(touch, EVENT_TSI_READY);
 
+	if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE)
+		da9034_event_handler(touch, EVENT_PEN_DOWN);
+
 	return 0;
 }
 
@@ -385,6 +392,6 @@ static void __exit da9034_touch_exit(void)
 module_exit(da9034_touch_exit);
 
 MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034");
-MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:da9034-touch");
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index dfa6a84ab50..4cc047a5116 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -111,13 +111,12 @@ static void wm97xx_acc_pen_up(struct wm97xx *wm)
 #else
 static void wm97xx_acc_pen_up(struct wm97xx *wm)
 {
-	int count = 16;
+	unsigned int count;
+
 	schedule_timeout_uninterruptible(1);
 
-	while (count < 16) {
+	for (count = 0; count < 16; count++)
 		MODR;
-		count--;
-	}
 }
 #endif
 
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index cec480bffe3..69af8385ab1 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -370,8 +370,7 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm)
 	 * provided. */
 	BUG_ON(!wm->mach_ops->irq_enable);
 
-	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt,
-			IRQF_SHARED | IRQF_SAMPLE_RANDOM,
+	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
 			"wm97xx-pen", wm)) {
 		dev_err(wm->dev,
 			"Failed to register pen down interrupt, polling");
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index ec3c0e50766..2b3a055059e 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -149,14 +149,7 @@ static void usb_ctrl_complete(struct urb *urb)
 	if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) {
 	        /* Special case handling for pipe reset */
 		le16_to_cpus(&ctrl_msg->dr.wIndex);
-
-		/* toggle is reset on clear */
-		usb_settoggle(adapter->usb_dev, 
-			      ctrl_msg->dr.wIndex & ~USB_DIR_IN, 
-			      (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0,
-			      0);
-
-
+		usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex);
 	}
 	
 	if (ctrl_msg->complete)
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index d9d974a8f52..add3395d324 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -1461,7 +1461,6 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw)
 		return ret;
 	}
 
-	usb_settoggle(hdw->usb_dev, 0 & 0xf, !(0 & USB_DIR_IN), 0);
 	usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f));
 
 	pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 41736772c1d..b72b3d639f6 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -153,7 +153,7 @@ struct ep93xx_descs
 struct ep93xx_priv
 {
 	struct resource		*res;
-	void			*base_addr;
+	void __iomem		*base_addr;
 	int			irq;
 
 	struct ep93xx_descs	*descs;
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 41ac94872b8..e06686ae858 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -127,7 +127,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
 	if (tx_enabled(port)) {
-		disable_irq(ourport->tx_irq);
+		disable_irq_nosync(ourport->tx_irq);
 		tx_enabled(port) = 0;
 		if (port->flags & UPF_CONS_FLOW)
 			s3c24xx_serial_rx_enable(port);
@@ -154,7 +154,7 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port)
 
 	if (rx_enabled(port)) {
 		dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
-		disable_irq(ourport->rx_irq);
+		disable_irq_nosync(ourport->rx_irq);
 		rx_enabled(port) = 0;
 	}
 }
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index c1688c71f05..c76feea5fe2 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -195,7 +195,7 @@ static void cs_deassert(struct driver_data *drv_data)
 	struct chip_data *chip = drv_data->cur_chip;
 
 	if (chip->cs_control) {
-		chip->cs_control(PXA2XX_CS_ASSERT);
+		chip->cs_control(PXA2XX_CS_DEASSERT);
 		return;
 	}
 
diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 79e90fed27d..299d29d1dad 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -41,6 +41,8 @@ static int binder_last_id;
 static struct proc_dir_entry *binder_proc_dir_entry_root;
 static struct proc_dir_entry *binder_proc_dir_entry_proc;
 static struct hlist_head binder_dead_nodes;
+static HLIST_HEAD(binder_deferred_list);
+static DEFINE_MUTEX(binder_deferred_lock);
 
 static int binder_read_proc_proc(
 	char *page, char **start, off_t off, int count, int *eof, void *data);
@@ -54,11 +56,7 @@ static int binder_read_proc_proc(
 #define SZ_4M                               0x400000
 #endif
 
-#ifndef __i386__
-#define FORBIDDEN_MMAP_FLAGS                (VM_WRITE | VM_EXEC)
-#else
 #define FORBIDDEN_MMAP_FLAGS                (VM_WRITE)
-#endif
 
 #define BINDER_SMALL_BUF_SIZE (PAGE_SIZE * 64)
 
@@ -236,6 +234,12 @@ struct binder_buffer {
 	uint8_t data[0];
 };
 
+enum {
+	BINDER_DEFERRED_PUT_FILES    = 0x01,
+	BINDER_DEFERRED_FLUSH        = 0x02,
+	BINDER_DEFERRED_RELEASE      = 0x04,
+};
+
 struct binder_proc {
 	struct hlist_node proc_node;
 	struct rb_root threads;
@@ -245,8 +249,11 @@ struct binder_proc {
 	int pid;
 	struct vm_area_struct *vma;
 	struct task_struct *tsk;
+	struct files_struct *files;
+	struct hlist_node deferred_work_node;
+	int deferred_work;
 	void *buffer;
-	size_t user_buffer_offset;
+	ptrdiff_t user_buffer_offset;
 
 	struct list_head buffers;
 	struct rb_root free_buffers;
@@ -310,12 +317,14 @@ struct binder_transaction {
 	uid_t	sender_euid;
 };
 
+static void binder_defer_work(struct binder_proc *proc, int defer);
+
 /*
  * copied from get_unused_fd_flags
  */
-int task_get_unused_fd_flags(struct task_struct *tsk, int flags)
+int task_get_unused_fd_flags(struct binder_proc *proc, int flags)
 {
-	struct files_struct *files = get_files_struct(tsk);
+	struct files_struct *files = proc->files;
 	int fd, error;
 	struct fdtable *fdt;
 	unsigned long rlim_cur;
@@ -337,9 +346,9 @@ repeat:
 	 * will limit the total number of files that can be opened.
 	 */
 	rlim_cur = 0;
-	if (lock_task_sighand(tsk, &irqs)) {
-		rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
-		unlock_task_sighand(tsk, &irqs);
+	if (lock_task_sighand(proc->tsk, &irqs)) {
+		rlim_cur = proc->tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
+		unlock_task_sighand(proc->tsk, &irqs);
 	}
 	if (fd >= rlim_cur)
 		goto out;
@@ -375,7 +384,6 @@ repeat:
 
 out:
 	spin_unlock(&files->file_lock);
-	put_files_struct(files);
 	return error;
 }
 
@@ -383,9 +391,9 @@ out:
  * copied from fd_install
  */
 static void task_fd_install(
-	struct task_struct *tsk, unsigned int fd, struct file *file)
+	struct binder_proc *proc, unsigned int fd, struct file *file)
 {
-	struct files_struct *files = get_files_struct(tsk);
+	struct files_struct *files = proc->files;
 	struct fdtable *fdt;
 
 	if (files == NULL)
@@ -396,7 +404,6 @@ static void task_fd_install(
 	BUG_ON(fdt->fd[fd] != NULL);
 	rcu_assign_pointer(fdt->fd[fd], file);
 	spin_unlock(&files->file_lock);
-	put_files_struct(files);
 }
 
 /*
@@ -413,10 +420,10 @@ static void __put_unused_fd(struct files_struct *files, unsigned int fd)
 /*
  * copied from sys_close
  */
-static long task_close_fd(struct task_struct *tsk, unsigned int fd)
+static long task_close_fd(struct binder_proc *proc, unsigned int fd)
 {
 	struct file *filp;
-	struct files_struct *files = get_files_struct(tsk);
+	struct files_struct *files = proc->files;
 	struct fdtable *fdt;
 	int retval;
 
@@ -443,12 +450,10 @@ static long task_close_fd(struct task_struct *tsk, unsigned int fd)
 		     retval == -ERESTART_RESTARTBLOCK))
 		retval = -EINTR;
 
-	put_files_struct(files);
 	return retval;
 
 out_unlock:
 	spin_unlock(&files->file_lock);
-	put_files_struct(files);
 	return -EBADF;
 }
 
@@ -618,7 +623,8 @@ static int binder_update_page_range(struct binder_proc *proc, int allocate,
 			       proc->pid, page_addr);
 			goto err_map_kernel_failed;
 		}
-		user_page_addr = (size_t)page_addr + proc->user_buffer_offset;
+		user_page_addr =
+			(uintptr_t)page_addr + proc->user_buffer_offset;
 		ret = vm_insert_page(vma, user_page_addr, page[0]);
 		if (ret) {
 			printk(KERN_ERR "binder: %d: binder_alloc_buf failed "
@@ -639,7 +645,7 @@ free_range:
 	     page_addr -= PAGE_SIZE) {
 		page = &proc->pages[(page_addr - proc->buffer) / PAGE_SIZE];
 		if (vma)
-			zap_page_range(vma, (size_t)page_addr +
+			zap_page_range(vma, (uintptr_t)page_addr +
 				proc->user_buffer_offset, PAGE_SIZE, NULL);
 err_vm_insert_page_failed:
 		unmap_kernel_range((unsigned long)page_addr, PAGE_SIZE);
@@ -720,18 +726,19 @@ static struct binder_buffer *binder_alloc_buf(struct binder_proc *proc,
 		       "er %p size %zd\n", proc->pid, size, buffer, buffer_size);
 
 	has_page_addr =
-		(void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK);
+		(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK);
 	if (n == NULL) {
 		if (size + sizeof(struct binder_buffer) + 4 >= buffer_size)
 			buffer_size = size; /* no room for other buffers */
 		else
 			buffer_size = size + sizeof(struct binder_buffer);
 	}
-	end_page_addr = (void *)PAGE_ALIGN((size_t)buffer->data + buffer_size);
+	end_page_addr =
+		(void *)PAGE_ALIGN((uintptr_t)buffer->data + buffer_size);
 	if (end_page_addr > has_page_addr)
 		end_page_addr = has_page_addr;
 	if (binder_update_page_range(proc, 1,
-	    (void *)PAGE_ALIGN((size_t)buffer->data), end_page_addr, NULL))
+	    (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr, NULL))
 		return NULL;
 
 	rb_erase(best_fit, &proc->free_buffers);
@@ -762,12 +769,12 @@ static struct binder_buffer *binder_alloc_buf(struct binder_proc *proc,
 
 static void *buffer_start_page(struct binder_buffer *buffer)
 {
-	return (void *)((size_t)buffer & PAGE_MASK);
+	return (void *)((uintptr_t)buffer & PAGE_MASK);
 }
 
 static void *buffer_end_page(struct binder_buffer *buffer)
 {
-	return (void *)(((size_t)(buffer + 1) - 1) & PAGE_MASK);
+	return (void *)(((uintptr_t)(buffer + 1) - 1) & PAGE_MASK);
 }
 
 static void binder_delete_free_buffer(
@@ -845,8 +852,8 @@ static void binder_free_buf(
 	}
 
 	binder_update_page_range(proc, 0,
-		(void *)PAGE_ALIGN((size_t)buffer->data),
-		(void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK),
+		(void *)PAGE_ALIGN((uintptr_t)buffer->data),
+		(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK),
 		NULL);
 	rb_erase(&buffer->rb_node, &proc->allocated_buffers);
 	buffer->free = 1;
@@ -1345,6 +1352,17 @@ binder_transaction(struct binder_proc *proc, struct binder_thread *thread,
 		if (!(tr->flags & TF_ONE_WAY) && thread->transaction_stack) {
 			struct binder_transaction *tmp;
 			tmp = thread->transaction_stack;
+			if (tmp->to_thread != thread) {
+				binder_user_error("binder: %d:%d got new "
+					"transaction with bad transaction stack"
+					", transaction %d has target %d:%d\n",
+					proc->pid, thread->pid, tmp->debug_id,
+					tmp->to_proc ? tmp->to_proc->pid : 0,
+					tmp->to_thread ?
+					tmp->to_thread->pid : 0);
+				return_error = BR_FAILED_REPLY;
+				goto err_bad_call_stack;
+			}
 			while (tmp) {
 				if (tmp->from && tmp->from->proc == target_proc)
 					target_thread = tmp->from;
@@ -1434,10 +1452,19 @@ binder_transaction(struct binder_proc *proc, struct binder_thread *thread,
 		return_error = BR_FAILED_REPLY;
 		goto err_copy_data_failed;
 	}
+	if (!IS_ALIGNED(tr->offsets_size, sizeof(size_t))) {
+		binder_user_error("binder: %d:%d got transaction with "
+			"invalid offsets size, %zd\n",
+			proc->pid, thread->pid, tr->offsets_size);
+		return_error = BR_FAILED_REPLY;
+		goto err_bad_offset;
+	}
 	off_end = (void *)offp + tr->offsets_size;
 	for (; offp < off_end; offp++) {
 		struct flat_binder_object *fp;
-		if (*offp > t->buffer->data_size - sizeof(*fp)) {
+		if (*offp > t->buffer->data_size - sizeof(*fp) ||
+		    t->buffer->data_size < sizeof(*fp) ||
+		    !IS_ALIGNED(*offp, sizeof(void *))) {
 			binder_user_error("binder: %d:%d got transaction with "
 				"invalid offset, %zd\n",
 				proc->pid, thread->pid, *offp);
@@ -1544,13 +1571,13 @@ binder_transaction(struct binder_proc *proc, struct binder_thread *thread,
 				return_error = BR_FAILED_REPLY;
 				goto err_fget_failed;
 			}
-			target_fd = task_get_unused_fd_flags(target_proc->tsk, O_CLOEXEC);
+			target_fd = task_get_unused_fd_flags(target_proc, O_CLOEXEC);
 			if (target_fd < 0) {
 				fput(file);
 				return_error = BR_FAILED_REPLY;
 				goto err_get_unused_fd_failed;
 			}
-			task_fd_install(target_proc->tsk, target_fd, file);
+			task_fd_install(target_proc, target_fd, file);
 			if (binder_debug_mask & BINDER_DEBUG_TRANSACTION)
 				printk(KERN_INFO "        fd %ld -> %d\n", fp->handle, target_fd);
 			/* TODO: fput? */
@@ -1655,7 +1682,9 @@ binder_transaction_buffer_release(struct binder_proc *proc, struct binder_buffer
 		off_end = (void *)offp + buffer->offsets_size;
 	for (; offp < off_end; offp++) {
 		struct flat_binder_object *fp;
-		if (*offp > buffer->data_size - sizeof(*fp)) {
+		if (*offp > buffer->data_size - sizeof(*fp) ||
+		    buffer->data_size < sizeof(*fp) ||
+		    !IS_ALIGNED(*offp, sizeof(void *))) {
 			printk(KERN_ERR "binder: transaction release %d bad"
 					"offset %zd, size %zd\n", debug_id, *offp, buffer->data_size);
 			continue;
@@ -1691,7 +1720,7 @@ binder_transaction_buffer_release(struct binder_proc *proc, struct binder_buffer
 			if (binder_debug_mask & BINDER_DEBUG_TRANSACTION)
 				printk(KERN_INFO "        fd %ld\n", fp->handle);
 			if (failed_at)
-				task_close_fd(proc->tsk, fp->handle);
+				task_close_fd(proc, fp->handle);
 			break;
 
 		default:
@@ -2340,7 +2369,7 @@ retry:
 
 		tr.data_size = t->buffer->data_size;
 		tr.offsets_size = t->buffer->offsets_size;
-		tr.data.ptr.buffer = (void *)((void *)t->buffer->data + proc->user_buffer_offset);
+		tr.data.ptr.buffer = (void *)t->buffer->data + proc->user_buffer_offset;
 		tr.data.ptr.offsets = tr.data.ptr.buffer + ALIGN(t->buffer->data_size, sizeof(void *));
 
 		if (put_user(cmd, (uint32_t __user *)ptr))
@@ -2656,6 +2685,7 @@ static void binder_vma_open(struct vm_area_struct *vma)
 			(unsigned long)pgprot_val(vma->vm_page_prot));
 	dump_stack();
 }
+
 static void binder_vma_close(struct vm_area_struct *vma)
 {
 	struct binder_proc *proc = vma->vm_private_data;
@@ -2666,6 +2696,7 @@ static void binder_vma_close(struct vm_area_struct *vma)
 			(vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags,
 			(unsigned long)pgprot_val(vma->vm_page_prot));
 	proc->vma = NULL;
+	binder_defer_work(proc, BINDER_DEFERRED_PUT_FILES);
 }
 
 static struct vm_operations_struct binder_vm_ops = {
@@ -2698,6 +2729,12 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 	}
 	vma->vm_flags = (vma->vm_flags | VM_DONTCOPY) & ~VM_MAYWRITE;
 
+	if (proc->buffer) {
+		ret = -EBUSY;
+		failure_string = "already mapped";
+		goto err_already_mapped;
+	}
+
 	area = get_vm_area(vma->vm_end - vma->vm_start, VM_IOREMAP);
 	if (area == NULL) {
 		ret = -ENOMEM;
@@ -2705,7 +2742,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 		goto err_get_vm_area_failed;
 	}
 	proc->buffer = area->addr;
-	proc->user_buffer_offset = vma->vm_start - (size_t)proc->buffer;
+	proc->user_buffer_offset = vma->vm_start - (uintptr_t)proc->buffer;
 
 #ifdef CONFIG_CPU_CACHE_VIPT
 	if (cache_is_vipt_aliasing()) {
@@ -2738,6 +2775,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 	binder_insert_free_buffer(proc, buffer);
 	proc->free_async_space = proc->buffer_size / 2;
 	barrier();
+	proc->files = get_files_struct(current);
 	proc->vma = vma;
 
 	/*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n", proc->pid, vma->vm_start, vma->vm_end, proc->buffer);*/
@@ -2745,10 +2783,12 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 
 err_alloc_small_buf_failed:
 	kfree(proc->pages);
+	proc->pages = NULL;
 err_alloc_pages_failed:
 	vfree(proc->buffer);
+	proc->buffer = NULL;
 err_get_vm_area_failed:
-	mutex_unlock(&binder_lock);
+err_already_mapped:
 err_bad_arg:
 	printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n", proc->pid, vma->vm_start, vma->vm_end, failure_string, ret);
 	return ret;
@@ -2780,6 +2820,7 @@ static int binder_open(struct inode *nodp, struct file *filp)
 	if (binder_proc_dir_entry_proc) {
 		char strbuf[11];
 		snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
+		remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
 		create_proc_read_entry(strbuf, S_IRUGO, binder_proc_dir_entry_proc, binder_read_proc_proc, proc);
 	}
 
@@ -2788,11 +2829,17 @@ static int binder_open(struct inode *nodp, struct file *filp)
 
 static int binder_flush(struct file *filp, fl_owner_t id)
 {
-	struct rb_node *n;
 	struct binder_proc *proc = filp->private_data;
-	int wake_count = 0;
 
-	mutex_lock(&binder_lock);
+	binder_defer_work(proc, BINDER_DEFERRED_FLUSH);
+
+	return 0;
+}
+
+static void binder_deferred_flush(struct binder_proc *proc)
+{
+	struct rb_node *n;
+	int wake_count = 0;
 	for (n = rb_first(&proc->threads); n != NULL; n = rb_next(n)) {
 		struct binder_thread *thread = rb_entry(n, struct binder_thread, rb_node);
 		thread->looper |= BINDER_LOOPER_STATE_NEED_RETURN;
@@ -2802,28 +2849,35 @@ static int binder_flush(struct file *filp, fl_owner_t id)
 		}
 	}
 	wake_up_interruptible_all(&proc->wait);
-	mutex_unlock(&binder_lock);
 
 	if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
 		printk(KERN_INFO "binder_flush: %d woke %d threads\n", proc->pid, wake_count);
-
-	return 0;
 }
 
 static int binder_release(struct inode *nodp, struct file *filp)
 {
-	struct hlist_node *pos;
-	struct binder_transaction *t;
-	struct rb_node *n;
 	struct binder_proc *proc = filp->private_data;
-	int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
-
 	if (binder_proc_dir_entry_proc) {
 		char strbuf[11];
 		snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
 		remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
 	}
-	mutex_lock(&binder_lock);
+
+	binder_defer_work(proc, BINDER_DEFERRED_RELEASE);
+
+	return 0;
+}
+
+static void binder_deferred_release(struct binder_proc *proc)
+{
+	struct hlist_node *pos;
+	struct binder_transaction *t;
+	struct rb_node *n;
+	int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
+
+	BUG_ON(proc->vma);
+	BUG_ON(proc->files);
+
 	hlist_del(&proc->proc_node);
 	if (binder_context_mgr_node && binder_context_mgr_node->proc == proc) {
 		if (binder_debug_mask & BINDER_DEBUG_DEAD_BINDER)
@@ -2897,7 +2951,6 @@ static int binder_release(struct inode *nodp, struct file *filp)
 	}
 
 	binder_stats.obj_deleted[BINDER_STAT_PROC]++;
-	mutex_unlock(&binder_lock);
 
 	page_count = 0;
 	if (proc->pages) {
@@ -2921,7 +2974,57 @@ static int binder_release(struct inode *nodp, struct file *filp)
 		       proc->pid, threads, nodes, incoming_refs, outgoing_refs, active_transactions, buffers, page_count);
 
 	kfree(proc);
-	return 0;
+}
+
+static void binder_deferred_func(struct work_struct *work)
+{
+	struct binder_proc *proc;
+	struct files_struct *files;
+
+	int defer;
+	do {
+		mutex_lock(&binder_lock);
+		mutex_lock(&binder_deferred_lock);
+		if (!hlist_empty(&binder_deferred_list)) {
+			proc = hlist_entry(binder_deferred_list.first,
+					struct binder_proc, deferred_work_node);
+			hlist_del_init(&proc->deferred_work_node);
+			defer = proc->deferred_work;
+			proc->deferred_work = 0;
+		} else {
+			proc = NULL;
+			defer = 0;
+		}
+		mutex_unlock(&binder_deferred_lock);
+
+		files = NULL;
+		if (defer & BINDER_DEFERRED_PUT_FILES)
+			if ((files = proc->files))
+				proc->files = NULL;
+
+		if (defer & BINDER_DEFERRED_FLUSH)
+			binder_deferred_flush(proc);
+
+		if (defer & BINDER_DEFERRED_RELEASE)
+			binder_deferred_release(proc); /* frees proc */
+
+		mutex_unlock(&binder_lock);
+		if (files)
+			put_files_struct(files);
+	} while (proc);
+}
+static DECLARE_WORK(binder_deferred_work, binder_deferred_func);
+
+static void binder_defer_work(struct binder_proc *proc, int defer)
+{
+	mutex_lock(&binder_deferred_lock);
+	proc->deferred_work |= defer;
+	if (hlist_unhashed(&proc->deferred_work_node)) {
+		hlist_add_head(&proc->deferred_work_node,
+				&binder_deferred_list);
+		schedule_work(&binder_deferred_work);
+	}
+	mutex_unlock(&binder_deferred_lock);
 }
 
 static char *print_binder_transaction(char *buf, char *end, const char *prefix, struct binder_transaction *t)
diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c
index 6f6e36a3bd9..c8af9a868d6 100644
--- a/drivers/staging/at76_usb/at76_usb.c
+++ b/drivers/staging/at76_usb/at76_usb.c
@@ -5259,6 +5259,18 @@ static int at76_alloc_urbs(struct at76_priv *priv,
 	return 0;
 }
 
+static const struct net_device_ops at76_netdev_ops = {
+	.ndo_open		= at76_open,
+	.ndo_stop		= at76_stop,
+	.ndo_get_stats		= at76_get_stats,
+	.ndo_start_xmit		= at76_tx,
+	.ndo_tx_timeout		= at76_tx_timeout,
+	.ndo_set_multicast_list	= at76_set_multicast,
+	.ndo_set_mac_address	= at76_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 /* Register network device and initialize the hardware */
 static int at76_init_new_device(struct at76_priv *priv,
 				struct usb_interface *interface)
@@ -5303,21 +5315,15 @@ static int at76_init_new_device(struct at76_priv *priv,
 	priv->scan_mode = SCAN_TYPE_ACTIVE;
 
 	netdev->flags &= ~IFF_MULTICAST;	/* not yet or never */
-	netdev->open = at76_open;
-	netdev->stop = at76_stop;
-	netdev->get_stats = at76_get_stats;
+	netdev->netdev_ops = &at76_netdev_ops;
 	netdev->ethtool_ops = &at76_ethtool_ops;
 
 	/* Add pointers to enable iwspy support. */
 	priv->wireless_data.spy_data = &priv->spy_data;
 	netdev->wireless_data = &priv->wireless_data;
 
-	netdev->hard_start_xmit = at76_tx;
-	netdev->tx_timeout = at76_tx_timeout;
 	netdev->watchdog_timeo = 2 * HZ;
 	netdev->wireless_handlers = &at76_handler_def;
-	netdev->set_multicast_list = at76_set_multicast;
-	netdev->set_mac_address = at76_set_mac_address;
 	dev_alloc_name(netdev, "wlan%d");
 
 	ret = register_netdev(priv->netdev);
diff --git a/drivers/staging/epl/VirtualEthernetLinux.c b/drivers/staging/epl/VirtualEthernetLinux.c
index 21206c4d22f..077724a556c 100644
--- a/drivers/staging/epl/VirtualEthernetLinux.c
+++ b/drivers/staging/epl/VirtualEthernetLinux.c
@@ -284,6 +284,17 @@ static tEplKernel VEthRecvFrame(tEplFrameInfo * pFrameInfo_p)
 	return Ret;
 }
 
+static const struct net_device_ops epl_netdev_ops = {
+	.ndo_open		= VEthOpen,
+	.ndo_stop		= VEthClose,
+	.ndo_get_stats		= VEthGetStats,
+	.ndo_start_xmit		= VEthXmit,
+	.ndo_tx_timeout		= VEthTimeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 tEplKernel VEthAddInstance(tEplDllkInitParam *pInitParam_p)
 {
 	tEplKernel Ret = kEplSuccessful;
@@ -299,11 +310,7 @@ tEplKernel VEthAddInstance(tEplDllkInitParam *pInitParam_p)
 		goto Exit;
 	}
 
-	pVEthNetDevice_g->open = VEthOpen;
-	pVEthNetDevice_g->stop = VEthClose;
-	pVEthNetDevice_g->get_stats = VEthGetStats;
-	pVEthNetDevice_g->hard_start_xmit = VEthXmit;
-	pVEthNetDevice_g->tx_timeout = VEthTimeout;
+	pVEthNetDevice_g->netdev_ops = &epl_netdev_ops;
 	pVEthNetDevice_g->watchdog_timeo = EPL_VETH_TX_TIMEOUT;
 	pVEthNetDevice_g->destructor = free_netdev;
 
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index de65972ff36..951c73d5db2 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -112,6 +112,19 @@ void et131x_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
 void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
 void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 
+static const struct net_device_ops et131x_netdev_ops = {
+	.ndo_open		= et131x_open,
+	.ndo_stop		= et131x_close,
+	.ndo_start_xmit		= et131x_tx,
+	.ndo_set_multicast_list	= et131x_multicast,
+	.ndo_tx_timeout		= et131x_tx_timeout,
+	.ndo_change_mtu		= et131x_change_mtu,
+	.ndo_set_mac_address	= et131x_set_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_get_stats		= et131x_stats,
+	.ndo_do_ioctl		= et131x_ioctl,
+};
+
 /**
  * et131x_device_alloc
  *
@@ -142,16 +155,8 @@ struct net_device *et131x_device_alloc(void)
 	 */
 	//netdev->init               = &et131x_init;
 	//netdev->set_config = &et131x_config;
-	netdev->get_stats = &et131x_stats;
-	netdev->open = &et131x_open;
-	netdev->stop = &et131x_close;
-	netdev->do_ioctl = &et131x_ioctl;
-	netdev->set_multicast_list = &et131x_multicast;
-	netdev->hard_start_xmit = &et131x_tx;
-	netdev->tx_timeout = &et131x_tx_timeout;
 	netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
-	netdev->change_mtu = &et131x_change_mtu;
-	netdev->set_mac_address = &et131x_set_mac_addr;
+	netdev->netdev_ops = &et131x_netdev_ops;
 
 	//netdev->ethtool_ops        = &et131x_ethtool_ops;
 
diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c
index 58bfc8d81b3..f47c0ce2849 100644
--- a/drivers/staging/go7007/go7007-driver.c
+++ b/drivers/staging/go7007/go7007-driver.c
@@ -268,21 +268,6 @@ int go7007_register_encoder(struct go7007 *go)
 			init_i2c_module(&go->i2c_adapter,
 					go->board_info->i2c_devs[i].id,
 					go->board_info->i2c_devs[i].addr);
-#ifdef TUNER_SET_TYPE_ADDR
-		if (go->tuner_type >= 0) {
-			struct tuner_setup tun_setup = {
-				.mode_mask	= T_ANALOG_TV,
-				.addr		= ADDR_UNSET,
-				.type		= go->tuner_type
-			};
-			i2c_clients_command(&go->i2c_adapter,
-				TUNER_SET_TYPE_ADDR, &tun_setup);
-		}
-#else
-		if (go->tuner_type >= 0)
-			i2c_clients_command(&go->i2c_adapter,
-				TUNER_SET_TYPE, &go->tuner_type);
-#endif
 		if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
 			i2c_clients_command(&go->i2c_adapter,
 				DECODER_SET_CHANNEL, &go->channel_number);
diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c
index 58fddb12237..0a7eeef7c00 100644
--- a/drivers/staging/go7007/wis-sony-tuner.c
+++ b/drivers/staging/go7007/wis-sony-tuner.c
@@ -386,6 +386,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 	struct wis_sony_tuner *t = i2c_get_clientdata(client);
 
 	switch (cmd) {
+#if 0
 #ifdef TUNER_SET_TYPE_ADDR
 	case TUNER_SET_TYPE_ADDR:
 	{
@@ -463,6 +464,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 				t->type, sony_tuners[t->type - 200].name);
 		break;
 	}
+#endif
 	case VIDIOC_G_FREQUENCY:
 	{
 		struct v4l2_frequency *f = arg;
diff --git a/drivers/staging/line6/audio.c b/drivers/staging/line6/audio.c
index 3aa946899ce..e2ac8d60f8c 100644
--- a/drivers/staging/line6/audio.c
+++ b/drivers/staging/line6/audio.c
@@ -27,11 +27,12 @@ int line6_init_audio(struct usb_line6 *line6)
 {
 	static int dev;
 	struct snd_card *card;
+	int err;
 
-	card = snd_card_new(line6_index[dev], line6_id[dev], THIS_MODULE, 0);
-
-	if (card == NULL)
-		return -ENOMEM;
+	err = snd_card_create(line6_index[dev], line6_id[dev], THIS_MODULE, 0,
+			      &card);
+	if (err < 0)
+		return err;
 
 	line6->card = card;
 
diff --git a/drivers/staging/otus/usbdrv.c b/drivers/staging/otus/usbdrv.c
index 565a839589f..540cbbb826f 100644
--- a/drivers/staging/otus/usbdrv.c
+++ b/drivers/staging/otus/usbdrv.c
@@ -822,6 +822,21 @@ int zfLnxVapXmitFrame(struct sk_buff *skb, struct net_device *dev)
     return 0;
 }
 
+static const struct net_device_ops vap_netdev_ops = {
+	.ndo_open		= zfLnxVapOpen,
+	.ndo_stop		= zfLnxVapClose,
+	.ndo_start_xmit		= zfLnxVapXmitFrame,
+	.ndo_get_stats		= usbdrv_get_stats,
+	.ndo_change_mtu		= usbdrv_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef ZM_HOSTAPD_SUPPORT
+	.ndo_do_ioctl		= usbdrv_ioctl,
+#else
+	.ndo_do_ioctl		= NULL,
+#endif
+};
+
 int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId)
 {
     /* Allocate net device structure */
@@ -846,16 +861,7 @@ int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId)
     vap[vapId].dev->ml_priv = parentDev->ml_priv;
 
     //dev->hard_start_xmit = &zd1212_wds_xmit_frame;
-    vap[vapId].dev->hard_start_xmit = &zfLnxVapXmitFrame;
-    vap[vapId].dev->open = &zfLnxVapOpen;
-    vap[vapId].dev->stop = &zfLnxVapClose;
-    vap[vapId].dev->get_stats = &usbdrv_get_stats;
-    vap[vapId].dev->change_mtu = &usbdrv_change_mtu;
-#ifdef ZM_HOSTAPD_SUPPORT
-    vap[vapId].dev->do_ioctl = usbdrv_ioctl;
-#else
-    vap[vapId].dev->do_ioctl = NULL;
-#endif
+    vap[vapId].dev->netdev_ops = &vap_netdev_ops;
     vap[vapId].dev->destructor = free_netdev;
 
     vap[vapId].dev->tx_queue_len = 0;
@@ -1068,6 +1074,18 @@ void zfLnxUnlinkAllUrbs(struct usbdrv_private *macp)
     usb_unlink_urb(macp->RegInUrb);
 }
 
+static const struct net_device_ops otus_netdev_ops = {
+	.ndo_open		= usbdrv_open,
+	.ndo_stop		= usbdrv_close,
+	.ndo_start_xmit		= usbdrv_xmit_frame,
+	.ndo_change_mtu		= usbdrv_change_mtu,
+	.ndo_get_stats		= usbdrv_get_stats,
+	.ndo_set_multicast_list	= usbdrv_set_multi,
+	.ndo_set_mac_address	= usbdrv_set_mac,
+	.ndo_do_ioctl		= usbdrv_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp)
 {
     //unsigned char addr[6];
@@ -1092,14 +1110,7 @@ u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp)
     dev->wireless_handlers = (struct iw_handler_def *)&p80211wext_handler_def;
 #endif
 
-    dev->open = usbdrv_open;
-    dev->hard_start_xmit = usbdrv_xmit_frame;
-    dev->stop = usbdrv_close;
-    dev->change_mtu = &usbdrv_change_mtu;
-    dev->get_stats = usbdrv_get_stats;
-    dev->set_multicast_list = usbdrv_set_multi;
-    dev->set_mac_address = usbdrv_set_mac;
-    dev->do_ioctl = usbdrv_ioctl;
+    dev->netdev_ops = &otus_netdev_ops;
 
     dev->flags |= IFF_MULTICAST;
 
diff --git a/drivers/staging/otus/zdusb.c b/drivers/staging/otus/zdusb.c
index 78f1d2224fa..2a6d937ba5e 100644
--- a/drivers/staging/otus/zdusb.c
+++ b/drivers/staging/otus/zdusb.c
@@ -48,7 +48,8 @@ static const char driver_name[] = "Otus";
 static struct usb_device_id zd1221_ids [] = {
 	{ USB_DEVICE(VENDOR_ATHR, PRODUCT_AR9170) },
         { USB_DEVICE(VENDOR_DLINK, PRODUCT_DWA160A) },
-	{ USB_DEVICE(0x0846, 0x9010) },
+	{ USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WNDA3100) },
+	{ USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WN111v2) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/staging/otus/zdusb.h b/drivers/staging/otus/zdusb.h
index 656dc212ade..9f8ab2e9616 100644
--- a/drivers/staging/otus/zdusb.h
+++ b/drivers/staging/otus/zdusb.h
@@ -40,4 +40,8 @@
 #define VENDOR_DLINK            0x07D1  //Dlink
 #define PRODUCT_DWA160A         0x3C10
 
+#define	VENDOR_NETGEAR		0x0846	/* NetGear */
+#define	PRODUCT_WNDA3100	0x9010
+#define	PRODUCT_WN111v2		0x9001
+
 #endif
diff --git a/drivers/staging/pohmelfs/config.c b/drivers/staging/pohmelfs/config.c
index 3e67da9ea38..a6eaa42fb66 100644
--- a/drivers/staging/pohmelfs/config.c
+++ b/drivers/staging/pohmelfs/config.c
@@ -81,6 +81,45 @@ static struct pohmelfs_config_group *pohmelfs_find_create_config_group(unsigned
 	return g;
 }
 
+static inline void pohmelfs_insert_config_entry(struct pohmelfs_sb *psb, struct pohmelfs_config *dst)
+{
+	struct pohmelfs_config *tmp;
+
+	INIT_LIST_HEAD(&dst->config_entry);
+
+	list_for_each_entry(tmp, &psb->state_list, config_entry) {
+		if (dst->state.ctl.prio > tmp->state.ctl.prio)
+			list_add_tail(&dst->config_entry, &tmp->config_entry);
+	}
+	if (list_empty(&dst->config_entry))
+		list_add_tail(&dst->config_entry, &psb->state_list);
+}
+
+static int pohmelfs_move_config_entry(struct pohmelfs_sb *psb,
+		struct pohmelfs_config *dst, struct pohmelfs_config *new)
+{
+	if ((dst->state.ctl.prio == new->state.ctl.prio) &&
+		(dst->state.ctl.perm == new->state.ctl.perm))
+		return 0;
+
+	dprintk("%s: dst: prio: %d, perm: %x, new: prio: %d, perm: %d.\n",
+			__func__, dst->state.ctl.prio, dst->state.ctl.perm,
+			new->state.ctl.prio, new->state.ctl.perm);
+	dst->state.ctl.prio = new->state.ctl.prio;
+	dst->state.ctl.perm = new->state.ctl.perm;
+
+	list_del_init(&dst->config_entry);
+	pohmelfs_insert_config_entry(psb, dst);
+	return 0;
+}
+
+/*
+ * pohmelfs_copy_config() is used to copy new state configs from the
+ * config group (controlled by the netlink messages) into the superblock.
+ * This happens either at startup time where no transactions can access
+ * the list of the configs (and thus list of the network states), or at
+ * run-time, where it is protected by the psb->state_lock.
+ */
 int pohmelfs_copy_config(struct pohmelfs_sb *psb)
 {
 	struct pohmelfs_config_group *g;
@@ -103,7 +142,9 @@ int pohmelfs_copy_config(struct pohmelfs_sb *psb)
 		err = 0;
 		list_for_each_entry(dst, &psb->state_list, config_entry) {
 			if (pohmelfs_config_eql(&dst->state.ctl, &c->state.ctl)) {
-				err = -EEXIST;
+				err = pohmelfs_move_config_entry(psb, dst, c);
+				if (!err)
+					err = -EEXIST;
 				break;
 			}
 		}
@@ -119,7 +160,7 @@ int pohmelfs_copy_config(struct pohmelfs_sb *psb)
 
 		memcpy(&dst->state.ctl, &c->state.ctl, sizeof(struct pohmelfs_ctl));
 
-		list_add_tail(&dst->config_entry, &psb->state_list);
+		pohmelfs_insert_config_entry(psb, dst);
 
 		err = pohmelfs_state_init_one(psb, dst);
 		if (err) {
@@ -248,6 +289,13 @@ out_unlock:
         return err;
 }
 
+static int pohmelfs_modify_config(struct pohmelfs_ctl *old, struct pohmelfs_ctl *new)
+{
+	old->perm = new->perm;
+	old->prio = new->prio;
+	return 0;
+}
+
 static int pohmelfs_cn_ctl(struct cn_msg *msg, int action)
 {
 	struct pohmelfs_config_group *g;
@@ -278,6 +326,9 @@ static int pohmelfs_cn_ctl(struct cn_msg *msg, int action)
 				g->num_entry--;
 				kfree(c);
 				goto out_unlock;
+			} else if (action == POHMELFS_FLAGS_MODIFY) {
+				err = pohmelfs_modify_config(sc, ctl);
+				goto out_unlock;
 			} else {
 				err = -EEXIST;
 				goto out_unlock;
@@ -296,6 +347,7 @@ static int pohmelfs_cn_ctl(struct cn_msg *msg, int action)
 	}
 	memcpy(&c->state.ctl, ctl, sizeof(struct pohmelfs_ctl));
 	g->num_entry++;
+
 	list_add_tail(&c->config_entry, &g->config_list);
 
 out_unlock:
@@ -401,10 +453,9 @@ static void pohmelfs_cn_callback(void *data)
 
 	switch (msg->flags) {
 		case POHMELFS_FLAGS_ADD:
-			err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_ADD);
-			break;
 		case POHMELFS_FLAGS_DEL:
-			err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_DEL);
+		case POHMELFS_FLAGS_MODIFY:
+			err = pohmelfs_cn_ctl(msg, msg->flags);
 			break;
 		case POHMELFS_FLAGS_SHOW:
 			err = pohmelfs_cn_disp(msg);
diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c
index 7a41183a32e..b5799842fb8 100644
--- a/drivers/staging/pohmelfs/dir.c
+++ b/drivers/staging/pohmelfs/dir.c
@@ -328,7 +328,7 @@ static int pohmelfs_sync_remote_dir(struct pohmelfs_inode *pi)
 {
 	struct inode *inode = &pi->vfs_inode;
 	struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
-	long ret = msecs_to_jiffies(25000);
+	long ret = psb->wait_on_page_timeout;
 	int err;
 
 	dprintk("%s: dir: %llu, state: %lx: remote_synced: %d.\n",
@@ -389,11 +389,11 @@ static int pohmelfs_readdir(struct file *file, void *dirent, filldir_t filldir)
 	dprintk("%s: parent: %llu, fpos: %llu, hash: %08lx.\n",
 			__func__, pi->ino, (u64)file->f_pos,
 			(unsigned long)file->private_data);
-
+#if 0
 	err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
 	if (err)
 		return err;
-
+#endif
 	err = pohmelfs_sync_remote_dir(pi);
 	if (err)
 		return err;
@@ -513,10 +513,6 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct
 
 	need_lock = pohmelfs_need_lock(parent, lock_type);
 
-	err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
-	if (err)
-		goto out;
-
 	str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0);
 
 	mutex_lock(&parent->offset_lock);
@@ -525,8 +521,8 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct
 		ino = n->ino;
 	mutex_unlock(&parent->offset_lock);
 
-	dprintk("%s: 1 ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx.\n",
-			__func__, ino, inode, str.name, str.hash, parent->state);
+	dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx, need_lock: %d.\n",
+			__func__, ino, inode, str.name, str.hash, parent->state, need_lock);
 
 	if (ino) {
 		inode = ilookup(dir->i_sb, ino);
@@ -534,7 +530,7 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct
 			goto out;
 	}
 
-	dprintk("%s: dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
+	dprintk("%s: no inode dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
 			__func__, dir, parent->ino,
 			str.name, str.len, parent->state, ino);
 
@@ -543,6 +539,10 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct
 			goto out;
 	}
 
+	err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
+	if (err)
+		goto out;
+
 	err = pohmelfs_lookup_single(parent, &str, ino);
 	if (err)
 		goto out;
@@ -557,10 +557,10 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct
 
 	if (ino) {
 		inode = ilookup(dir->i_sb, ino);
-		printk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
+		dprintk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
 				__func__, ino, inode, str.name, str.hash);
 		if (!inode) {
-			printk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
+			dprintk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
 				__func__, ino, str.name, str.hash);
 			//return NULL;
 			return ERR_PTR(-EACCES);
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 5bf16504cd6..b2eaf904726 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -1169,16 +1169,17 @@ err_out_put:
 static int pohmelfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
 {
 	struct inode *inode = dentry->d_inode;
+#if 0
 	struct pohmelfs_inode *pi = POHMELFS_I(inode);
 	int err;
 
 	err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
 	if (err)
 		return err;
-
 	dprintk("%s: ino: %llu, mode: %o, uid: %u, gid: %u, size: %llu.\n",
 			__func__, pi->ino, inode->i_mode, inode->i_uid,
 			inode->i_gid, inode->i_size);
+#endif
 
 	generic_fillattr(inode, stat);
 	return 0;
@@ -1342,14 +1343,6 @@ static void pohmelfs_put_super(struct super_block *sb)
 
 	kfree(psb);
 	sb->s_fs_info = NULL;
-
-	pohmelfs_ftrans_exit();
-}
-
-static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
-{
-	*flags |= MS_RDONLY;
-	return 0;
 }
 
 static int pohmelfs_statfs(struct dentry *dentry, struct kstatfs *buf)
@@ -1394,42 +1387,33 @@ static int pohmelfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	return 0;
 }
 
-static const struct super_operations pohmelfs_sb_ops = {
-	.alloc_inode	= pohmelfs_alloc_inode,
-	.destroy_inode	= pohmelfs_destroy_inode,
-	.drop_inode	= pohmelfs_drop_inode,
-	.write_inode	= pohmelfs_write_inode,
-	.put_super	= pohmelfs_put_super,
-	.remount_fs	= pohmelfs_remount,
-	.statfs		= pohmelfs_statfs,
-	.show_options	= pohmelfs_show_options,
-};
-
 enum {
 	pohmelfs_opt_idx,
+	pohmelfs_opt_crypto_thread_num,
+	pohmelfs_opt_trans_max_pages,
+	pohmelfs_opt_crypto_fail_unsupported,
+
+	/* Remountable options */
 	pohmelfs_opt_trans_scan_timeout,
 	pohmelfs_opt_drop_scan_timeout,
 	pohmelfs_opt_wait_on_page_timeout,
 	pohmelfs_opt_trans_retries,
-	pohmelfs_opt_crypto_thread_num,
-	pohmelfs_opt_trans_max_pages,
-	pohmelfs_opt_crypto_fail_unsupported,
 	pohmelfs_opt_mcache_timeout,
 };
 
 static struct match_token pohmelfs_tokens[] = {
 	{pohmelfs_opt_idx, "idx=%u"},
+	{pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
+	{pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
+	{pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
 	{pohmelfs_opt_trans_scan_timeout, "trans_scan_timeout=%u"},
 	{pohmelfs_opt_drop_scan_timeout, "drop_scan_timeout=%u"},
 	{pohmelfs_opt_wait_on_page_timeout, "wait_on_page_timeout=%u"},
 	{pohmelfs_opt_trans_retries, "trans_retries=%u"},
-	{pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
-	{pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
-	{pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
 	{pohmelfs_opt_mcache_timeout, "mcache_timeout=%u"},
 };
 
-static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb)
+static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb, int remount)
 {
 	char *p;
 	substring_t args[MAX_OPT_ARGS];
@@ -1449,6 +1433,9 @@ static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb)
 		if (err)
 			return err;
 
+		if (remount && token <= pohmelfs_opt_crypto_fail_unsupported)
+			continue;
+
 		switch (token) {
 			case pohmelfs_opt_idx:
 				psb->idx = option;
@@ -1485,6 +1472,25 @@ static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb)
 	return 0;
 }
 
+static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
+{
+	int err;
+	struct pohmelfs_sb *psb = POHMELFS_SB(sb);
+	unsigned long old_sb_flags = sb->s_flags;
+
+	err = pohmelfs_parse_options(data, psb, 1);
+	if (err)
+		goto err_out_restore;
+
+	if (!(*flags & MS_RDONLY))
+		sb->s_flags &= ~MS_RDONLY;
+	return 0;
+
+err_out_restore:
+	sb->s_flags = old_sb_flags;
+	return err;
+}
+
 static void pohmelfs_flush_inode(struct pohmelfs_inode *pi, unsigned int count)
 {
 	struct inode *inode = &pi->vfs_inode;
@@ -1753,6 +1759,57 @@ err_out_exit:
 	return err;
 }
 
+static int pohmelfs_show_stats(struct seq_file *m, struct vfsmount *mnt)
+{
+	struct netfs_state *st;
+	struct pohmelfs_ctl *ctl;
+	struct pohmelfs_sb *psb = POHMELFS_SB(mnt->mnt_sb);
+	struct pohmelfs_config *c;
+
+	mutex_lock(&psb->state_lock);
+
+	seq_printf(m, "\nidx addr(:port) socket_type protocol active priority permissions\n");
+
+	list_for_each_entry(c, &psb->state_list, config_entry) {
+		st = &c->state;
+		ctl = &st->ctl;
+
+		seq_printf(m, "%u ", ctl->idx);
+		if (ctl->addr.sa_family == AF_INET) {
+			struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr;
+			//seq_printf(m, "%pi4:%u", &sin->sin_addr.s_addr, ntohs(sin->sin_port));
+			seq_printf(m, "%u.%u.%u.%u:%u", NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port));
+		} else if (ctl->addr.sa_family == AF_INET6) {
+			struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr;
+			seq_printf(m, "%pi6:%u", &sin->sin6_addr, ntohs(sin->sin6_port));
+		} else {
+			unsigned int i;
+			for (i=0; i<ctl->addrlen; ++i)
+				seq_printf(m, "%02x.", ctl->addr.addr[i]);
+		}
+
+		seq_printf(m, " %u %u %d %u %x\n",
+				ctl->type, ctl->proto,
+				st->socket != NULL,
+				ctl->prio, ctl->perm);
+	}
+	mutex_unlock(&psb->state_lock);
+
+	return 0;
+}
+
+static const struct super_operations pohmelfs_sb_ops = {
+	.alloc_inode	= pohmelfs_alloc_inode,
+	.destroy_inode	= pohmelfs_destroy_inode,
+	.drop_inode	= pohmelfs_drop_inode,
+	.write_inode	= pohmelfs_write_inode,
+	.put_super	= pohmelfs_put_super,
+	.remount_fs	= pohmelfs_remount,
+	.statfs		= pohmelfs_statfs,
+	.show_options	= pohmelfs_show_options,
+	.show_stats	= pohmelfs_show_stats,
+};
+
 /*
  * Allocate private superblock and create root dir.
  */
@@ -1764,8 +1821,6 @@ static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent)
 	struct pohmelfs_inode *npi;
 	struct qstr str;
 
-	pohmelfs_ftrans_init();
-
 	psb = kzalloc(sizeof(struct pohmelfs_sb), GFP_KERNEL);
 	if (!psb)
 		goto err_out_exit;
@@ -1816,7 +1871,7 @@ static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent)
 	mutex_init(&psb->state_lock);
 	INIT_LIST_HEAD(&psb->state_list);
 
-	err = pohmelfs_parse_options((char *) data, psb);
+	err = pohmelfs_parse_options((char *) data, psb, 0);
 	if (err)
 		goto err_out_free_sb;
 
@@ -1845,6 +1900,8 @@ static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent)
 		err = PTR_ERR(npi);
 		goto err_out_crypto_exit;
 	}
+	set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
+	clear_bit(NETFS_INODE_OWNED, &npi->state);
 
 	root = &npi->vfs_inode;
 
@@ -1887,11 +1944,29 @@ static int pohmelfs_get_sb(struct file_system_type *fs_type,
 				mnt);
 }
 
+/*
+ * We need this to sync all inodes earlier, since when writeback
+ * is invoked from the umount/mntput path dcache is already shrunk,
+ * see generic_shutdown_super(), and no inodes can access the path.
+ */
+static void pohmelfs_kill_super(struct super_block *sb)
+{
+	struct writeback_control wbc = {
+		.sync_mode	= WB_SYNC_ALL,
+		.range_start	= 0,
+		.range_end	= LLONG_MAX,
+		.nr_to_write	= LONG_MAX,
+	};
+	generic_sync_sb_inodes(sb, &wbc);
+
+	kill_anon_super(sb);
+}
+
 static struct file_system_type pohmel_fs_type = {
 	.owner		= THIS_MODULE,
 	.name		= "pohmel",
 	.get_sb		= pohmelfs_get_sb,
-	.kill_sb 	= kill_anon_super,
+	.kill_sb 	= pohmelfs_kill_super,
 };
 
 /*
diff --git a/drivers/staging/pohmelfs/lock.c b/drivers/staging/pohmelfs/lock.c
index ad4a18559bd..22fef18cae9 100644
--- a/drivers/staging/pohmelfs/lock.c
+++ b/drivers/staging/pohmelfs/lock.c
@@ -41,7 +41,8 @@ static int pohmelfs_send_lock_trans(struct pohmelfs_inode *pi,
 	path_len = err;
 
 	err = -ENOMEM;
-	t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize, 0, 0);
+	t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize,
+			NETFS_TRANS_SINGLE_DST, 0);
 	if (!t)
 		goto err_out_exit;
 
diff --git a/drivers/staging/pohmelfs/net.c b/drivers/staging/pohmelfs/net.c
index c9b8540c1ef..11ecac026ca 100644
--- a/drivers/staging/pohmelfs/net.c
+++ b/drivers/staging/pohmelfs/net.c
@@ -26,55 +26,6 @@
 
 #include "netfs.h"
 
-static int pohmelfs_ftrans_size = 10240;
-static u32 *pohmelfs_ftrans;
-
-int pohmelfs_ftrans_init(void)
-{
-	pohmelfs_ftrans = vmalloc(pohmelfs_ftrans_size * 4);
-	if (!pohmelfs_ftrans)
-		return -ENOMEM;
-
-	return 0;
-}
-
-void pohmelfs_ftrans_exit(void)
-{
-	vfree(pohmelfs_ftrans);
-}
-
-void pohmelfs_ftrans_clean(u64 id)
-{
-	if (pohmelfs_ftrans) {
-		u32 i = id & 0xffffffff;
-		int idx = i % pohmelfs_ftrans_size;
-
-		pohmelfs_ftrans[idx] = 0;
-	}
-}
-
-void pohmelfs_ftrans_update(u64 id)
-{
-	if (pohmelfs_ftrans) {
-		u32 i = id & 0xffffffff;
-		int idx = i % pohmelfs_ftrans_size;
-
-		pohmelfs_ftrans[idx] = i;
-	}
-}
-
-int pohmelfs_ftrans_check(u64 id)
-{
-	if (pohmelfs_ftrans) {
-		u32 i = id & 0xffffffff;
-		int idx = i % pohmelfs_ftrans_size;
-
-		return (pohmelfs_ftrans[idx] == i);
-	}
-
-	return -1;
-}
-
 /*
  * Async machinery lives here.
  * All commands being sent to server do _not_ require sync reply,
@@ -450,8 +401,24 @@ static int pohmelfs_readdir_response(struct netfs_state *st)
 			if (err != -EEXIST)
 				goto err_out_put;
 		} else {
+			struct dentry *dentry, *alias, *pd;
+
 			set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
 			clear_bit(NETFS_INODE_OWNED, &npi->state);
+
+			pd = d_find_alias(&parent->vfs_inode);
+			if (pd) {
+				str.hash = full_name_hash(str.name, str.len);
+				dentry = d_alloc(pd, &str);
+				if (dentry) {
+					alias = d_materialise_unique(dentry, &npi->vfs_inode);
+					if (alias)
+						dput(dentry);
+				}
+
+				dput(dentry);
+				dput(pd);
+			}
 		}
 	}
 out:
@@ -638,15 +605,12 @@ static int pohmelfs_transaction_response(struct netfs_state *st)
 	if (dst) {
 		netfs_trans_remove_nolock(dst, st);
 		t = dst->trans;
-
-		pohmelfs_ftrans_update(cmd->start);
 	}
 	mutex_unlock(&st->trans_lock);
 
 	if (!t) {
-		int check = pohmelfs_ftrans_check(cmd->start);
-		printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u, double: %d.\n",
-				__func__, cmd->start, cmd->id, cmd->size, cmd->ext, check);
+		printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u.\n",
+				__func__, cmd->start, cmd->id, cmd->size, cmd->ext);
 		err = -EINVAL;
 		goto out;
 	}
diff --git a/drivers/staging/pohmelfs/netfs.h b/drivers/staging/pohmelfs/netfs.h
index 2ff21ae5bb1..c78cfcb042f 100644
--- a/drivers/staging/pohmelfs/netfs.h
+++ b/drivers/staging/pohmelfs/netfs.h
@@ -87,6 +87,7 @@ enum {
 	POHMELFS_FLAGS_DEL,     /* Network state control message for DEL */
 	POHMELFS_FLAGS_SHOW,    /* Network state control message for SHOW */
 	POHMELFS_FLAGS_CRYPTO,	/* Crypto data control message */
+	POHMELFS_FLAGS_MODIFY,	/* Network state modification message */
 };
 
 /*
@@ -116,16 +117,20 @@ struct pohmelfs_crypto
 	unsigned char		data[0];	/* Algorithm string, key and IV */
 };
 
+#define POHMELFS_IO_PERM_READ		(1<<0)
+#define POHMELFS_IO_PERM_WRITE		(1<<1)
+
 /*
  * Configuration command used to create table of different remote servers.
  */
 struct pohmelfs_ctl
 {
-	unsigned int		idx;		/* Config index */
-	unsigned int		type;		/* Socket type */
-	unsigned int		proto;		/* Socket protocol */
-	unsigned int		addrlen;	/* Size of the address */
-	unsigned short		unused;		/* Align structure by 4 bytes */
+	__u32			idx;		/* Config index */
+	__u32			type;		/* Socket type */
+	__u32			proto;		/* Socket protocol */
+	__u16			addrlen;	/* Size of the address */
+	__u16			perm;		/* IO permission */
+	__u16			prio;		/* IO priority */
 	struct saddr		addr;		/* Remote server address */
 };
 
@@ -921,12 +926,6 @@ static inline void pohmelfs_mcache_put(struct pohmelfs_sb *psb,
 		pohmelfs_mcache_free(psb, m);
 }
 
-int pohmelfs_ftrans_init(void);
-void pohmelfs_ftrans_exit(void);
-void pohmelfs_ftrans_update(u64 id);
-int pohmelfs_ftrans_check(u64 id);
-void pohmelfs_ftrans_clean(u64 id);
-
 #endif /* __KERNEL__*/
 
 #endif /* __NETFS_H */
diff --git a/drivers/staging/pohmelfs/trans.c b/drivers/staging/pohmelfs/trans.c
index bcb59425a21..fef5f9bd692 100644
--- a/drivers/staging/pohmelfs/trans.c
+++ b/drivers/staging/pohmelfs/trans.c
@@ -456,34 +456,25 @@ int netfs_trans_finish_send(struct netfs_trans *t, struct pohmelfs_sb *psb)
 		__func__, t, t->gen, t->iovec.iov_len, t->page_num, psb->active_state);
 #endif
 	mutex_lock(&psb->state_lock);
+	list_for_each_entry(c, &psb->state_list, config_entry) {
+		st = &c->state;
 
-	if ((t->flags & NETFS_TRANS_SINGLE_DST) && psb->active_state) {
-		st = &psb->active_state->state;
-
-		err = -EPIPE;
-		if (netfs_state_poll(st) & POLLOUT) {
-			err = netfs_trans_push_dst(t, st);
-			if (!err) {
-				err = netfs_trans_send(t, st);
-				if (err) {
-					netfs_trans_drop_last(t, st);
-				} else {
-					pohmelfs_switch_active(psb);
-					goto out;
-				}
-			}
+		if (t->flags & NETFS_TRANS_SINGLE_DST) {
+			if (!(st->ctl.perm & POHMELFS_IO_PERM_READ))
+				continue;
+		} else {
+			if (!(st->ctl.perm & POHMELFS_IO_PERM_WRITE))
+				continue;
 		}
-		pohmelfs_switch_active(psb);
-	}
 
-	list_for_each_entry(c, &psb->state_list, config_entry) {
-		st = &c->state;
+		if (psb->active_state && (psb->active_state->state.ctl.prio >= st->ctl.prio))
+			st = &psb->active_state->state;
 
 		err = netfs_trans_push(t, st);
 		if (!err && (t->flags & NETFS_TRANS_SINGLE_DST))
 			break;
 	}
-out:
+
 	mutex_unlock(&psb->state_lock);
 #if 0
 	dprintk("%s: fully sent t: %p, gen: %u, size: %u, page_num: %u, err: %d.\n",
@@ -501,8 +492,6 @@ int netfs_trans_finish(struct netfs_trans *t, struct pohmelfs_sb *psb)
 
 	t->gen = atomic_inc_return(&psb->trans_gen);
 
-	pohmelfs_ftrans_clean(t->gen);
-
 	cmd->size = t->iovec.iov_len - sizeof(struct netfs_cmd) +
 		t->attached_size + t->attached_pages * sizeof(struct netfs_cmd);
 	cmd->cmd = NETFS_TRANS;
diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c
index cf17bcdd733..6c4396f0903 100644
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -722,6 +722,20 @@ err:
 	return (-1);
 } /* End of rt28xx_open */
 
+static const struct net_device_ops rt2860_netdev_ops = {
+	.ndo_open		= MainVirtualIF_open,
+	.ndo_stop		= MainVirtualIF_close,
+	.ndo_do_ioctl		= rt28xx_ioctl,
+	.ndo_get_stats		= RT28xx_get_ether_stats,
+	.ndo_validate_addr	= NULL,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+	.ndo_start_xmit		= IKANOS_DataFramesTx,
+#else
+	.ndo_start_xmit		= rt28xx_send_packets,
+#endif
+};
 
 /* Must not be called for mdev and apdev */
 static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
@@ -733,11 +747,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 
 
 	//ether_setup(dev);
-	dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
-	dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
 
 #ifdef CONFIG_STA_SUPPORT
 #if WIRELESS_EXT >= 12
@@ -760,12 +769,8 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 #if WIRELESS_EXT < 21
 		dev->get_wireless_stats = rt28xx_get_wireless_stats;
 #endif
-	dev->get_stats = RT28xx_get_ether_stats;
-	dev->open = MainVirtualIF_open; //rt28xx_open;
-	dev->stop = MainVirtualIF_close; //rt28xx_close;
 	dev->priv_flags = INT_MAIN;
-	dev->do_ioctl = rt28xx_ioctl;
-	dev->validate_addr = NULL;
+	dev->netdev_ops = &rt2860_netdev_ops;
 	// find available device name
 	for (i = 0; i < 8; i++)
 	{
diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index 5dd15aac9ce..a42caa37080 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -96,6 +96,7 @@
 	{USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */		\
 	{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */		\
 	{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */		\
+	{USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */		\
 	{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */		\
 	{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */		\
 	{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */		\
diff --git a/drivers/staging/rt2870/rt_main_dev.c b/drivers/staging/rt2870/rt_main_dev.c
index 313ecea0bfa..48ad41136d0 100644
--- a/drivers/staging/rt2870/rt_main_dev.c
+++ b/drivers/staging/rt2870/rt_main_dev.c
@@ -855,6 +855,20 @@ err:
 	return (-1);
 } /* End of rt28xx_open */
 
+static const struct net_device_ops rt2870_netdev_ops = {
+	.ndo_open		= MainVirtualIF_open,
+	.ndo_stop		= MainVirtualIF_close,
+	.ndo_do_ioctl		= rt28xx_ioctl,
+	.ndo_get_stats		= RT28xx_get_ether_stats,
+	.ndo_validate_addr	= NULL,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+	.ndo_start_xmit		= IKANOS_DataFramesTx,
+#else
+	.ndo_start_xmit		= rt28xx_send_packets,
+#endif
+};
 
 /* Must not be called for mdev and apdev */
 static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
@@ -866,12 +880,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 
 
 	//ether_setup(dev);
-	dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
-	dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
-
 //	dev->set_multicast_list = ieee80211_set_multicast_list;
 //	dev->change_mtu = ieee80211_change_mtu;
 #ifdef CONFIG_STA_SUPPORT
@@ -895,16 +903,10 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 #if WIRELESS_EXT < 21
 		dev->get_wireless_stats = rt28xx_get_wireless_stats;
 #endif
-	dev->get_stats = RT28xx_get_ether_stats;
-	dev->open = MainVirtualIF_open; //rt28xx_open;
-	dev->stop = MainVirtualIF_close; //rt28xx_close;
 //	dev->uninit = ieee80211_if_reinit;
 //	dev->destructor = ieee80211_if_free;
 	dev->priv_flags = INT_MAIN;
-	dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-    dev->validate_addr = NULL;
-#endif
+	dev->netdev_ops = &rt2870_netdev_ops;
 	// find available device name
 	for (i = 0; i < 8; i++)
 	{
diff --git a/drivers/staging/rt3070/rt_main_dev.c b/drivers/staging/rt3070/rt_main_dev.c
index c000646286e..81f769cf109 100644
--- a/drivers/staging/rt3070/rt_main_dev.c
+++ b/drivers/staging/rt3070/rt_main_dev.c
@@ -436,7 +436,6 @@ static int rt28xx_init(IN struct net_device *net_dev)
 //    OID_SET_HT_PHYMODE		SetHT;
 //	WPDMA_GLO_CFG_STRUC     GloCfg;
 	UINT32 		MacCsr0 = 0;
-	UINT32		MacValue = 0;
 
 #ifdef RT2870
 #ifdef INF_AMAZON_SE
@@ -849,6 +848,20 @@ err:
 	return (-1);
 } /* End of rt28xx_open */
 
+static const struct net_device_ops rt3070_netdev_ops = {
+	.ndo_open		= MainVirtualIF_open,
+	.ndo_stop		= MainVirtualIF_close,
+	.ndo_do_ioctl		= rt28xx_ioctl,
+	.ndo_get_stats		= RT28xx_get_ether_stats,
+	.ndo_validate_addr	= NULL,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+	.ndo_start_xmit		= IKANOS_DataFramesTx,
+#else
+	.ndo_start_xmit		= rt28xx_send_packets,
+#endif
+};
 
 /* Must not be called for mdev and apdev */
 static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
@@ -860,12 +873,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 
 
 	//ether_setup(dev);
-	dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
-	dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
-
 //	dev->set_multicast_list = ieee80211_set_multicast_list;
 //	dev->change_mtu = ieee80211_change_mtu;
 #ifdef CONFIG_STA_SUPPORT
@@ -889,16 +896,10 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 #if WIRELESS_EXT < 21
 		dev->get_wireless_stats = rt28xx_get_wireless_stats;
 #endif
-	dev->get_stats = RT28xx_get_ether_stats;
-	dev->open = MainVirtualIF_open; //rt28xx_open;
-	dev->stop = MainVirtualIF_close; //rt28xx_close;
 //	dev->uninit = ieee80211_if_reinit;
 //	dev->destructor = ieee80211_if_free;
 	dev->priv_flags = INT_MAIN;
-	dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-    dev->validate_addr = NULL;
-#endif
+	dev->netdev_ops = &rt3070_netdev_ops;
 	// find available device name
 	for (i = 0; i < 8; i++)
 	{
diff --git a/drivers/staging/slicoss/README b/drivers/staging/slicoss/README
index 2d5b1127ce5..70f49099c06 100644
--- a/drivers/staging/slicoss/README
+++ b/drivers/staging/slicoss/README
@@ -10,7 +10,36 @@ TODO:
 	- move firmware loading to request_firmware()
 	- remove direct memory access of structures
 	- any remaining sparse and checkpatch.pl warnings
-	- any netdev recommended changes
+
+	- use net_device_ops
+	- use dev->stats rather than adapter->stats
+	- don't cast netdev_priv it is already void
+	- use compare_ether_addr
+	- GET RID OF MACROS
+	- work on all architectures
+	   - without CONFIG_X86_64 confusion
+	   - do 64 bit correctly
+	   - don't depend on order of union
+	- get rid of ASSERT(), use BUG() instead but only where necessary
+	  looks like most aren't really useful
+	- no new SIOCDEVPRIVATE ioctl allowed
+	- don't use module_param for configuring interrupt mitigation
+	  use ethtool instead
+	- reorder code to elminate use of forward declarations
+	- don't keep private linked list of drivers.
+	- remove all the gratiutous debug infrastructure
+	- use PCI_DEVICE()
+	- do ethtool correctly using ethtool_ops
+	- NAPI?
+	- wasted overhead of extra stats
+	- state variables for things that are
+	  easily availble and shouldn't be kept in card structure, cardnum, ...
+	  slotnumber, events, ...
+	- get rid of slic_spinlock wrapper
+	- volatile == bad design => bad code
+	- locking too fine grained, not designed just throw more locks
+	  at problem
+
 
 Please send patches to:
         Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index 94815634847..6f5d0bff435 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -345,6 +345,19 @@ static void slic_init_adapter(struct net_device *netdev,
 	return;
 }
 
+static const struct net_device_ops slic_netdev_ops = {
+	.ndo_open		= slic_entry_open,
+	.ndo_stop		= slic_entry_halt,
+	.ndo_start_xmit		= slic_xmit_start,
+	.ndo_do_ioctl		= slic_ioctl,
+	.ndo_set_mac_address	= slic_mac_set_address,
+	.ndo_get_stats		= slic_get_stats,
+	.ndo_set_multicast_list	= slic_mcast_set_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 static int __devinit slic_entry_probe(struct pci_dev *pcidev,
 			       const struct pci_device_id *pci_tbl_entry)
 {
@@ -442,13 +455,7 @@ static int __devinit slic_entry_probe(struct pci_dev *pcidev,
 
 	netdev->base_addr = (unsigned long)adapter->memorybase;
 	netdev->irq = adapter->irq;
-	netdev->open = slic_entry_open;
-	netdev->stop = slic_entry_halt;
-	netdev->hard_start_xmit = slic_xmit_start;
-	netdev->do_ioctl = slic_ioctl;
-	netdev->set_mac_address = slic_mac_set_address;
-	netdev->get_stats = slic_get_stats;
-	netdev->set_multicast_list = slic_mcast_set_list;
+	netdev->netdev_ops = &slic_netdev_ops;
 
 	slic_debug_adapter_create(adapter);
 
@@ -1260,7 +1267,7 @@ static int slic_mcast_add_list(struct adapter *adapter, char *address)
 	}
 
 	/* Doesn't already exist.  Allocate a structure to hold it */
-	mcaddr = kmalloc(sizeof(struct mcast_address), GFP_KERNEL);
+	mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC);
 	if (mcaddr == NULL)
 		return 1;
 
@@ -2284,7 +2291,7 @@ static u32 slic_card_locate(struct adapter *adapter)
 	}
 	if (!physcard) {
 		/* no structure allocated for this physical card yet */
-		physcard = kzalloc(sizeof(struct physcard), GFP_KERNEL);
+		physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
 		ASSERT(physcard);
 
 		physcard->next = slic_global.phys_card;
diff --git a/drivers/staging/stlc45xx/Kconfig b/drivers/staging/stlc45xx/Kconfig
index 8d3f46f190e..947fb75a9c6 100644
--- a/drivers/staging/stlc45xx/Kconfig
+++ b/drivers/staging/stlc45xx/Kconfig
@@ -1,6 +1,6 @@
 config STLC45XX
 	tristate "stlc4550/4560 support"
-	depends on MAC80211 && WLAN_80211 && SPI_MASTER
+	depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS
 	---help---
 	  This is a driver for stlc4550 and stlc4560 chipsets.
 
diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c
index 891f6e33467..076b3f7d39e 100644
--- a/drivers/staging/sxg/sxg.c
+++ b/drivers/staging/sxg/sxg.c
@@ -322,6 +322,8 @@ int sxg_add_msi_isr(struct adapter_t *adapter)
 	int ret,i;
 
 	if (!adapter->intrregistered) {
+		spin_unlock_irqrestore(&sxg_global.driver_lock,
+					sxg_global.flags);
 		for (i=0; i<adapter->nr_msix_entries; i++) {
 			ret = request_irq (adapter->msi_entries[i].vector,
 					sxg_isr,
@@ -329,6 +331,8 @@ int sxg_add_msi_isr(struct adapter_t *adapter)
 					adapter->netdev->name,
 					adapter->netdev);
 			if (ret) {
+				spin_lock_irqsave(&sxg_global.driver_lock,
+						 sxg_global.flags);
 				DBG_ERROR("sxg: MSI-X request_irq (%s) "
 					"FAILED [%x]\n", adapter->netdev->name,
 					 ret);
@@ -336,6 +340,7 @@ int sxg_add_msi_isr(struct adapter_t *adapter)
 			}
 		}
 	}
+	spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags);
 	adapter->msi_enabled = TRUE;
 	adapter->intrregistered = 1;
 	adapter->IntRegistered = TRUE;
@@ -896,6 +901,22 @@ static inline int sxg_read_config(struct adapter_t *adapter)
 	return status;
 }
 
+static const struct net_device_ops sxg_netdev_ops = {
+	.ndo_open		= sxg_entry_open,
+	.ndo_stop		= sxg_entry_halt,
+	.ndo_start_xmit		= sxg_send_packets,
+	.ndo_do_ioctl		= sxg_ioctl,
+	.ndo_change_mtu		= sxg_change_mtu,
+	.ndo_get_stats		= sxg_get_stats,
+	.ndo_set_multicast_list	= sxg_mcast_set_list,
+	.ndo_validate_addr	= eth_validate_addr,
+#if XXXTODO
+	.ndo_set_mac_address	= sxg_mac_set_address,
+#else
+	.ndo_set_mac_address	= eth_mac_addr,
+#endif
+};
+
 static int sxg_entry_probe(struct pci_dev *pcidev,
 			   const struct pci_device_id *pci_tbl_entry)
 {
@@ -1095,16 +1116,7 @@ static int sxg_entry_probe(struct pci_dev *pcidev,
 
 	netdev->base_addr = (unsigned long)adapter->base_addr;
 	netdev->irq = adapter->irq;
-	netdev->open = sxg_entry_open;
-	netdev->stop = sxg_entry_halt;
-	netdev->hard_start_xmit = sxg_send_packets;
-	netdev->do_ioctl = sxg_ioctl;
-	netdev->change_mtu = sxg_change_mtu;
-#if XXXTODO
-	netdev->set_mac_address = sxg_mac_set_address;
-#endif
-	netdev->get_stats = sxg_get_stats;
-	netdev->set_multicast_list = sxg_mcast_set_list;
+	netdev->netdev_ops = &sxg_netdev_ops;
 	SET_ETHTOOL_OPS(netdev, &sxg_nic_ethtool_ops);
  	netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	err = sxg_set_interrupt_capability(adapter);
@@ -2247,6 +2259,8 @@ static int sxg_entry_open(struct net_device *dev)
 	DBG_ERROR("sxg: %s EXIT\n", __func__);
 
 	spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags);
+	mod_timer(&adapter->watchdog_timer, jiffies);
+
 	return STATUS_SUCCESS;
 }
 
@@ -2568,6 +2582,7 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
 	u64 phys_addr;
 	unsigned long flags;
 	unsigned long queue_id=0;
+	int offload_cksum = 0;
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSgl",
 		  pSgl, SxgSgl, 0, 0);
@@ -2606,7 +2621,11 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
                 struct iphdr *ip;
 
                 ip = ip_hdr(skb);
-		if ((ip->protocol == IPPROTO_TCP)&&(DataLength >= sizeof(
+		if (ip->protocol == IPPROTO_TCP)
+			offload_cksum = 1;
+		if (!offload_cksum || !tcp_hdr(skb))
+			queue_id = 0;
+		else if (offload_cksum && (DataLength >= sizeof(
 							struct tcphdr))){
 			queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
 					(ntohs (tcp_hdr(skb)->source) &
@@ -2615,8 +2634,11 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
 						SXG_LARGE_SEND_QUEUE_MASK));
 		}
 	} else if (skb->protocol == htons(ETH_P_IPV6)) {
-		if ((ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) && (DataLength >=
-						 sizeof(struct tcphdr)) ) {
+		if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+			offload_cksum = 1;
+		if (!offload_cksum || !tcp_hdr(skb))
+			queue_id = 0;
+		else if (offload_cksum && (DataLength>=sizeof(struct tcphdr))){
 			queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
 					(ntohs (tcp_hdr(skb)->source) &
 					SXG_LARGE_SEND_QUEUE_MASK):
@@ -2645,23 +2667,38 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
 	}
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbCmd",
 		  XmtCmd, XmtRingInfo->Head, XmtRingInfo->Tail, 0);
-	/* Update stats */
-	adapter->stats.tx_packets++;
-	adapter->stats.tx_bytes += DataLength;
-#if XXXTODO			/* Stats stuff */
-	if (SXG_MULTICAST_PACKET(EtherHdr)) {
-		if (SXG_BROADCAST_PACKET(EtherHdr)) {
-			adapter->Stats.DumbXmtBcastPkts++;
-			adapter->Stats.DumbXmtBcastBytes += DataLength;
+	memset(XmtCmd, '\0', sizeof(*XmtCmd));
+	XmtCmd->SgEntries = 1;
+	XmtCmd->Flags = 0;
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		/*
+		 * We need to set the Checkum in IP  header to 0. This is
+		 * required by hardware.
+		 */
+		if (offload_cksum) {
+			ip_hdr(skb)->check = 0x0;
+			XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
+			XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
+			/*
+			 * Dont know if length will require a change in
+			 * case of VLAN
+			 */
+			XmtCmd->CsumFlags.MacLen = ETH_HLEN;
+			XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
+							SXG_NW_HDR_LEN_SHIFT;
 		} else {
-			adapter->Stats.DumbXmtMcastPkts++;
-			adapter->Stats.DumbXmtMcastBytes += DataLength;
+			if (skb_checksum_help(skb)){
+				printk(KERN_EMERG "Dropped UDP packet for"
+					" incorrect checksum calculation\n");
+				if (XmtCmd)
+					SXG_ABORT_CMD(XmtRingInfo);
+				spin_unlock_irqrestore(&adapter->XmtZeroLock,
+							 flags);
+				return STATUS_SUCCESS;
+			}
 		}
-	} else {
-		adapter->Stats.DumbXmtUcastPkts++;
-		adapter->Stats.DumbXmtUcastBytes += DataLength;
 	}
-#endif
+
 	/*
 	 * Fill in the command
 	 * Copy out the first SGE to the command and adjust for offset
@@ -2679,31 +2716,17 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
 		(SXG_INVALID_SGL(phys_addr,skb->data_len)))
 	{
 		spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
+		if (XmtCmd)
+			SXG_ABORT_CMD(XmtRingInfo);
 		/* Silently drop this packet */
 		printk(KERN_EMERG"Dropped a packet for 64k boundary problem\n");
 		return STATUS_SUCCESS;
 	}
-	memset(XmtCmd, '\0', sizeof(*XmtCmd));
 	XmtCmd->Buffer.FirstSgeAddress = phys_addr;
 	XmtCmd->Buffer.FirstSgeLength = DataLength;
 	XmtCmd->Buffer.SgeOffset = 0;
 	XmtCmd->Buffer.TotalLength = DataLength;
-	XmtCmd->SgEntries = 1;
-	XmtCmd->Flags = 0;
 
-	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		/*
-		 * We need to set the Checkum in IP  header to 0. This is
-		 * required by hardware.
-		 */
-		ip_hdr(skb)->check = 0x0;
-		XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
-		XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
-		/* Dont know if length will require a change in case of VLAN */
-		XmtCmd->CsumFlags.MacLen = ETH_HLEN;
-		XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
-							SXG_NW_HDR_LEN_SHIFT;
-	}
 	/*
 	 * Advance transmit cmd descripter by 1.
 	 * NOTE - See comments in SxgTcpOutput where we write
@@ -2715,6 +2738,24 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
 	ASSERT((queue_id & ~SXG_LARGE_SEND_QUEUE_MASK) == 0);
 	WRITE_REG(adapter->UcodeRegs[0].XmtCmd, ((queue_id << 16) | 1), TRUE);
 	adapter->Stats.XmtQLen++;	/* Stats within lock */
+	/* Update stats */
+	adapter->stats.tx_packets++;
+	adapter->stats.tx_bytes += DataLength;
+#if XXXTODO			/* Stats stuff */
+	if (SXG_MULTICAST_PACKET(EtherHdr)) {
+		if (SXG_BROADCAST_PACKET(EtherHdr)) {
+			adapter->Stats.DumbXmtBcastPkts++;
+			adapter->Stats.DumbXmtBcastBytes += DataLength;
+		} else {
+			adapter->Stats.DumbXmtMcastPkts++;
+			adapter->Stats.DumbXmtMcastBytes += DataLength;
+		}
+	} else {
+		adapter->Stats.DumbXmtUcastPkts++;
+		adapter->Stats.DumbXmtUcastBytes += DataLength;
+	}
+#endif
+
 	spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2",
 		  XmtCmd, pSgl, SxgSgl, 0);
diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
index 85b70545306..9c62f787cc9 100644
--- a/drivers/staging/uc2322/aten2011.c
+++ b/drivers/staging/uc2322/aten2011.c
@@ -603,10 +603,9 @@ static void ATEN2011_bulk_out_data_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&ATEN2011_port->port->port);
 
-	if (tty && ATEN2011_port->open) {
+	if (tty && ATEN2011_port->open)
 		/* tell the tty driver that something has changed */
-		wake_up_interruptible(&tty->write_wait);
-	}
+		tty_wakeup(tty);
 
 	/* schedule_work(&ATEN2011_port->port->work); */
 	tty_kref_put(tty);
@@ -825,12 +824,6 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port,
 	status = 0;
 	status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
 
-	/* force low_latency on so that our tty_push actually forces *
-	 * the data through,otherwise it is scheduled, and with      *
-	 * high data rates (like with OHCI) data can get lost.       */
-
-	if (tty)
-		tty->low_latency = 1;
 	/*
 	 * Check to see if we've set up our endpoint info yet
 	 * (can't set it up in ATEN2011_startup as the structures
@@ -1473,22 +1466,7 @@ static void ATEN2011_set_termios(struct tty_struct *tty,
 
 	cflag = tty->termios->c_cflag;
 
-	if (!cflag) {
-		dbg("%s %s", __func__, "cflag is NULL");
-		return;
-	}
-
-	/* check that they really want us to change something */
-	if (old_termios) {
-		if ((cflag == old_termios->c_cflag) &&
-		    (RELEVANT_IFLAG(tty->termios->c_iflag) ==
-		     RELEVANT_IFLAG(old_termios->c_iflag))) {
-			dbg("%s", "Nothing to change");
-			return;
-		}
-	}
-
-	dbg("%s - clfag %08x iflag %08x", __func__,
+	dbg("%s - cflag %08x iflag %08x", __func__,
 	    tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
 
 	if (old_termios) {
diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
index b2a606a3693..393e4df70df 100644
--- a/drivers/staging/wlan-ng/p80211netdev.c
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -711,6 +711,20 @@ static int wlan_change_mtu(netdevice_t *dev, int new_mtu)
 	return 0;
 }
 
+static const struct net_device_ops p80211_netdev_ops = {
+	.ndo_init		= p80211knetdev_init,
+	.ndo_open		= p80211knetdev_open,
+	.ndo_stop		= p80211knetdev_stop,
+	.ndo_get_stats		= p80211knetdev_get_stats,
+	.ndo_start_xmit		= p80211knetdev_hard_start_xmit,
+	.ndo_set_multicast_list	= p80211knetdev_set_multicast_list,
+	.ndo_do_ioctl		= p80211knetdev_do_ioctl,
+	.ndo_set_mac_address	= p80211knetdev_set_mac_address,
+	.ndo_tx_timeout		= p80211knetdev_tx_timeout,
+	.ndo_change_mtu		= wlan_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /*----------------------------------------------------------------
 * wlan_setup
 *
@@ -756,11 +770,7 @@ int wlan_setup(wlandevice_t *wlandev)
 	} else {
 		wlandev->netdev = dev;
 		dev->ml_priv = wlandev;
-		dev->hard_start_xmit = p80211knetdev_hard_start_xmit;
-		dev->get_stats = p80211knetdev_get_stats;
-		dev->init = p80211knetdev_init;
-		dev->open = p80211knetdev_open;
-		dev->stop = p80211knetdev_stop;
+		dev->netdev_ops = &p80211_netdev_ops;
 
 		mutex_init(&wlandev->ioctl_lock);
 		/* block ioctls until fully initialised. Don't forget to call
diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c
index c60b8fcf0e3..28034c81291 100644
--- a/drivers/uio/uio_cif.c
+++ b/drivers/uio/uio_cif.c
@@ -147,5 +147,6 @@ static void __exit hilscher_exit_module(void)
 module_init(hilscher_init_module);
 module_exit(hilscher_exit_module);
 
+MODULE_DEVICE_TABLE(pci, hilscher_pci_ids);
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Hans J. Koch, Benedikt Spranger");
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 3771d6e6d0c..34e6108e1d4 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -652,7 +652,7 @@ next_desc:
 
 	iface = &intf->altsetting[0];
 	ep = &iface->endpoint[0].desc;
-	if (!usb_endpoint_is_int_in(ep)) {
+	if (!ep || !usb_endpoint_is_int_in(ep)) {
 		rv = -EINVAL;
 		goto err;
 	}
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index df3c539f652..308609039c7 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -841,7 +841,7 @@ static int proc_resetep(struct dev_state *ps, void __user *arg)
 	ret = checkintf(ps, ret);
 	if (ret)
 		return ret;
-	usb_settoggle(ps->dev, ep & 0xf, !(ep & USB_DIR_IN), 0);
+	usb_reset_endpoint(ps->dev, ep);
 	return 0;
 }
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 81fa8506825..42b93da1085 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1539,6 +1539,32 @@ void usb_hcd_disable_endpoint(struct usb_device *udev,
 		hcd->driver->endpoint_disable(hcd, ep);
 }
 
+/**
+ * usb_hcd_reset_endpoint - reset host endpoint state
+ * @udev: USB device.
+ * @ep:   the endpoint to reset.
+ *
+ * Resets any host endpoint state such as the toggle bit, sequence
+ * number and current window.
+ */
+void usb_hcd_reset_endpoint(struct usb_device *udev,
+			    struct usb_host_endpoint *ep)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (hcd->driver->endpoint_reset)
+		hcd->driver->endpoint_reset(hcd, ep);
+	else {
+		int epnum = usb_endpoint_num(&ep->desc);
+		int is_out = usb_endpoint_dir_out(&ep->desc);
+		int is_control = usb_endpoint_xfer_control(&ep->desc);
+
+		usb_settoggle(udev, epnum, is_out, 0);
+		if (is_control)
+			usb_settoggle(udev, epnum, !is_out, 0);
+	}
+}
+
 /* Protect against drivers that try to unlink URBs after the device
  * is gone, by waiting until all unlinks for @udev are finished.
  * Since we don't currently track URBs by device, simply wait until
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index f750eb1ab59..e7d4479de41 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -206,6 +206,11 @@ struct hc_driver {
 	void 	(*endpoint_disable)(struct usb_hcd *hcd,
 			struct usb_host_endpoint *ep);
 
+	/* (optional) reset any endpoint state such as sequence number
+	   and current window */
+	void 	(*endpoint_reset)(struct usb_hcd *hcd,
+			struct usb_host_endpoint *ep);
+
 	/* root hub support */
 	int	(*hub_status_data) (struct usb_hcd *hcd, char *buf);
 	int	(*hub_control) (struct usb_hcd *hcd,
@@ -234,6 +239,8 @@ extern void usb_hcd_flush_endpoint(struct usb_device *udev,
 		struct usb_host_endpoint *ep);
 extern void usb_hcd_disable_endpoint(struct usb_device *udev,
 		struct usb_host_endpoint *ep);
+extern void usb_hcd_reset_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep);
 extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
 extern int usb_hcd_get_frame_number(struct usb_device *udev);
 
@@ -279,6 +286,13 @@ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
 extern void usb_hc_died(struct usb_hcd *hcd);
 extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
 
+/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+		((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+		 ((bit) << (ep)))
+
 /* -------------------------------------------------------------------------- */
 
 /* Enumeration is only for the hub driver, or HCD virtual root hubs */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 30a0690f368..b6262837765 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1002,8 +1002,7 @@ int usb_clear_halt(struct usb_device *dev, int pipe)
 	 * the copy in usb-storage, for as long as we need two copies.
 	 */
 
-	/* toggle was reset by the clear */
-	usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0);
+	usb_reset_endpoint(dev, endp);
 
 	return 0;
 }
@@ -1076,6 +1075,30 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
 }
 
 /**
+ * usb_reset_endpoint - Reset an endpoint's state.
+ * @dev: the device whose endpoint is to be reset
+ * @epaddr: the endpoint's address.  Endpoint number for output,
+ *	endpoint number + USB_DIR_IN for input
+ *
+ * Resets any host-side endpoint state such as the toggle bit,
+ * sequence number or current window.
+ */
+void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr)
+{
+	unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+	struct usb_host_endpoint *ep;
+
+	if (usb_endpoint_out(epaddr))
+		ep = dev->ep_out[epnum];
+	else
+		ep = dev->ep_in[epnum];
+	if (ep)
+		usb_hcd_reset_endpoint(dev, ep);
+}
+EXPORT_SYMBOL_GPL(usb_reset_endpoint);
+
+
+/**
  * usb_disable_interface -- Disable all endpoints for an interface
  * @dev: the device whose interface is being disabled
  * @intf: pointer to the interface descriptor
@@ -1117,7 +1140,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 		usb_disable_endpoint(dev, i, true);
 		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
 	}
-	dev->toggle[0] = dev->toggle[1] = 0;
 
 	/* getting rid of interfaces will disconnect
 	 * any drivers bound to them (a key side effect)
@@ -1154,28 +1176,24 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
  * usb_enable_endpoint - Enable an endpoint for USB communications
  * @dev: the device whose interface is being enabled
  * @ep: the endpoint
- * @reset_toggle: flag to set the endpoint's toggle back to 0
+ * @reset_ep: flag to reset the endpoint state
  *
- * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers.
+ * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers.
  * For control endpoints, both the input and output sides are handled.
  */
 void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
-		bool reset_toggle)
+		bool reset_ep)
 {
 	int epnum = usb_endpoint_num(&ep->desc);
 	int is_out = usb_endpoint_dir_out(&ep->desc);
 	int is_control = usb_endpoint_xfer_control(&ep->desc);
 
-	if (is_out || is_control) {
-		if (reset_toggle)
-			usb_settoggle(dev, epnum, 1, 0);
+	if (reset_ep)
+		usb_hcd_reset_endpoint(dev, ep);
+	if (is_out || is_control)
 		dev->ep_out[epnum] = ep;
-	}
-	if (!is_out || is_control) {
-		if (reset_toggle)
-			usb_settoggle(dev, epnum, 0, 0);
+	if (!is_out || is_control)
 		dev->ep_in[epnum] = ep;
-	}
 	ep->enabled = 1;
 }
 
@@ -1183,18 +1201,18 @@ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
  * usb_enable_interface - Enable all the endpoints for an interface
  * @dev: the device whose interface is being enabled
  * @intf: pointer to the interface descriptor
- * @reset_toggles: flag to set the endpoints' toggles back to 0
+ * @reset_eps: flag to reset the endpoints' state
  *
  * Enables all the endpoints for the interface's current altsetting.
  */
 void usb_enable_interface(struct usb_device *dev,
-		struct usb_interface *intf, bool reset_toggles)
+		struct usb_interface *intf, bool reset_eps)
 {
 	struct usb_host_interface *alt = intf->cur_altsetting;
 	int i;
 
 	for (i = 0; i < alt->desc.bNumEndpoints; ++i)
-		usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles);
+		usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps);
 }
 
 /**
@@ -1335,7 +1353,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface);
  * This issues a standard SET_CONFIGURATION request to the device using
  * the current configuration.  The effect is to reset most USB-related
  * state in the device, including interface altsettings (reset to zero),
- * endpoint halts (cleared), and data toggle (only for bulk and interrupt
+ * endpoint halts (cleared), and endpoint state (only for bulk and interrupt
  * endpoints).  Other usbcore state is unchanged, including bindings of
  * usb device drivers to interfaces.
  *
@@ -1343,7 +1361,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface);
  * (multi-interface) devices.  Instead, the driver for each interface may
  * use usb_set_interface() on the interfaces it claims.  Be careful though;
  * some devices don't support the SET_INTERFACE request, and others won't
- * reset all the interface state (notably data toggles).  Resetting the whole
+ * reset all the interface state (notably endpoint state).  Resetting the whole
  * configuration would affect other drivers' interfaces.
  *
  * The caller must own the device lock.
@@ -1376,8 +1394,6 @@ int usb_reset_configuration(struct usb_device *dev)
 	if (retval < 0)
 		return retval;
 
-	dev->toggle[0] = dev->toggle[1] = 0;
-
 	/* re-init hc/hcd interface/endpoint state */
 	for (i = 0; i < config->desc.bNumInterfaces; i++) {
 		struct usb_interface *intf = config->interface[i];
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index dcfc072630c..7eee400d3e3 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -362,7 +362,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 	dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
 	dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
 	/* ep0 maxpacket comes later, from device descriptor */
-	usb_enable_endpoint(dev, &dev->ep0, true);
+	usb_enable_endpoint(dev, &dev->ep0, false);
 	dev->can_submit = 1;
 
 	/* Save readable and stable topology id, distinguishing devices
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 96d65ca06ec..4007770f7ed 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -175,12 +175,6 @@ static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
 	strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info);
 }
 
-static u32 eth_get_link(struct net_device *net)
-{
-	struct eth_dev	*dev = netdev_priv(net);
-	return dev->gadget->speed != USB_SPEED_UNKNOWN;
-}
-
 /* REVISIT can also support:
  *   - WOL (by tracking suspends and issuing remote wakeup)
  *   - msglevel (implies updated messaging)
@@ -189,7 +183,7 @@ static u32 eth_get_link(struct net_device *net)
 
 static struct ethtool_ops ops = {
 	.get_drvinfo = eth_get_drvinfo,
-	.get_link = eth_get_link
+	.get_link = ethtool_op_get_link,
 };
 
 static void defer_kevent(struct eth_dev *dev, int flag)
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index 958751ccea4..c2050785a81 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -122,7 +122,8 @@ static uint32_t process_qset(struct whc *whc, struct whc_qset *qset)
 		process_inactive_qtd(whc, qset, td);
 	}
 
-	update |= qset_add_qtds(whc, qset);
+	if (!qset->remove)
+		update |= qset_add_qtds(whc, qset);
 
 done:
 	/*
@@ -254,23 +255,29 @@ int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
 
 	spin_lock_irqsave(&whc->lock, flags);
 
+	err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+	if (err < 0) {
+		spin_unlock_irqrestore(&whc->lock, flags);
+		return err;
+	}
+
 	qset = get_qset(whc, urb, GFP_ATOMIC);
 	if (qset == NULL)
 		err = -ENOMEM;
 	else
 		err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
 	if (!err) {
-		usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
 		if (!qset->in_sw_list)
 			asl_qset_insert_begin(whc, qset);
-	}
+	} else
+		usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
 
 	spin_unlock_irqrestore(&whc->lock, flags);
 
 	if (!err)
 		queue_work(whc->workqueue, &whc->async_work);
 
-	return 0;
+	return err;
 }
 
 /**
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index 1569afd6245..e019a5058ab 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -186,6 +186,28 @@ static void whc_endpoint_disable(struct usb_hcd *usb_hcd,
 	}
 }
 
+static void whc_endpoint_reset(struct usb_hcd *usb_hcd,
+			       struct usb_host_endpoint *ep)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	struct whc_qset *qset;
+
+	qset = ep->hcpriv;
+	if (qset) {
+		qset->remove = 1;
+
+		if (usb_endpoint_xfer_bulk(&ep->desc)
+		    || usb_endpoint_xfer_control(&ep->desc))
+			queue_work(whc->workqueue, &whc->async_work);
+		else
+			queue_work(whc->workqueue, &whc->periodic_work);
+
+		qset_reset(whc, qset);
+	}
+}
+
+
 static struct hc_driver whc_hc_driver = {
 	.description = "whci-hcd",
 	.product_desc = "Wireless host controller",
@@ -200,6 +222,7 @@ static struct hc_driver whc_hc_driver = {
 	.urb_enqueue = whc_urb_enqueue,
 	.urb_dequeue = whc_urb_dequeue,
 	.endpoint_disable = whc_endpoint_disable,
+	.endpoint_reset = whc_endpoint_reset,
 
 	.hub_status_data = wusbhc_rh_status_data,
 	.hub_control = wusbhc_rh_control,
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index df8b85f0709..ff4ef9e910d 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -128,7 +128,8 @@ static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset)
 		process_inactive_qtd(whc, qset, td);
 	}
 
-	update |= qset_add_qtds(whc, qset);
+	if (!qset->remove)
+		update |= qset_add_qtds(whc, qset);
 
 done:
 	/*
@@ -282,23 +283,29 @@ int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
 
 	spin_lock_irqsave(&whc->lock, flags);
 
+	err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+	if (err < 0) {
+		spin_unlock_irqrestore(&whc->lock, flags);
+		return err;
+	}
+
 	qset = get_qset(whc, urb, GFP_ATOMIC);
 	if (qset == NULL)
 		err = -ENOMEM;
 	else
 		err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
 	if (!err) {
-		usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
 		if (!qset->in_sw_list)
 			qset_insert_in_sw_list(whc, qset);
-	}
+	} else
+		usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
 
 	spin_unlock_irqrestore(&whc->lock, flags);
 
 	if (!err)
 		queue_work(whc->workqueue, &whc->periodic_work);
 
-	return 0;
+	return err;
 }
 
 /**
@@ -353,7 +360,6 @@ void pzl_qset_delete(struct whc *whc, struct whc_qset *qset)
 	qset_delete(whc, qset);
 }
 
-
 /**
  * pzl_init - initialize the periodic zone list
  * @whc: the WHCI host controller
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index 7be74314ee1..640b38fbd05 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -89,11 +89,16 @@ static void qset_fill_qh(struct whc_qset *qset, struct urb *urb)
 		QH_INFO3_TX_RATE_53_3
 		| QH_INFO3_TX_PWR(0) /* 0 == max power */
 		);
+
+	qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
 }
 
 /**
  * qset_clear - clear fields in a qset so it may be reinserted into a
- * schedule
+ * schedule.
+ *
+ * The sequence number and current window are not cleared (see
+ * qset_reset()).
  */
 void qset_clear(struct whc *whc, struct whc_qset *qset)
 {
@@ -101,9 +106,8 @@ void qset_clear(struct whc *whc, struct whc_qset *qset)
 	qset->remove = 0;
 
 	qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T);
-	qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start));
+	qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK;
 	qset->qh.err_count = 0;
-	qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
 	qset->qh.scratch[0] = 0;
 	qset->qh.scratch[1] = 0;
 	qset->qh.scratch[2] = 0;
@@ -114,6 +118,20 @@ void qset_clear(struct whc *whc, struct whc_qset *qset)
 }
 
 /**
+ * qset_reset - reset endpoint state in a qset.
+ *
+ * Clears the sequence number and current window.  This qset must not
+ * be in the ASL or PZL.
+ */
+void qset_reset(struct whc *whc, struct whc_qset *qset)
+{
+	wait_for_completion(&qset->remove_complete);
+
+	qset->qh.status &= ~QH_STATUS_SEQ_MASK;
+	qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
+}
+
+/**
  * get_qset - get the qset for an async endpoint
  *
  * A new qset is created if one does not already exist.
diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h
index d3543a181dc..24e94d983c5 100644
--- a/drivers/usb/host/whci/whcd.h
+++ b/drivers/usb/host/whci/whcd.h
@@ -184,6 +184,7 @@ void qset_free(struct whc *whc, struct whc_qset *qset);
 struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags);
 void qset_delete(struct whc *whc, struct whc_qset *qset);
 void qset_clear(struct whc *whc, struct whc_qset *qset);
+void qset_reset(struct whc *whc, struct whc_qset *qset);
 int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
 		 gfp_t mem_flags);
 void qset_free_std(struct whc *whc, struct whc_std *std);
diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h
index 51df7e313b3..794dba0d0f0 100644
--- a/drivers/usb/host/whci/whci-hc.h
+++ b/drivers/usb/host/whci/whci-hc.h
@@ -185,6 +185,7 @@ struct whc_qhead {
 #define QH_STATUS_FLOW_CTRL      (1 << 15)
 #define QH_STATUS_ICUR(i)        ((i) << 5)
 #define QH_STATUS_TO_ICUR(s)     (((s) >> 5) & 0x7)
+#define QH_STATUS_SEQ_MASK       0x1f
 
 /**
  * usb_pipe_to_qh_type - USB core pipe type to QH transfer type
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 569ef0fed0f..1976e9b4180 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -579,6 +579,7 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
 	 * trigger the "send a ZLP?" confusion.
 	 */
 	rndis = (maxpacket & 0x3f) == 0
+		&& length > maxpacket
 		&& length < 0xffff
 		&& (length % maxpacket) != 0;
 
@@ -1228,27 +1229,7 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx)
 
 				hw_ep = tx_ch->hw_ep;
 
-				/* Peripheral role never repurposes the
-				 * endpoint, so immediate completion is
-				 * safe.  Host role waits for the fifo
-				 * to empty (TXPKTRDY irq) before going
-				 * to the next queued bulk transfer.
-				 */
-				if (is_host_active(cppi->musb)) {
-#if 0
-					/* WORKAROUND because we may
-					 * not always get TXKPTRDY ...
-					 */
-					int	csr;
-
-					csr = musb_readw(hw_ep->regs,
-						MUSB_TXCSR);
-					if (csr & MUSB_TXCSR_TXPKTRDY)
-#endif
-						completed = false;
-				}
-				if (completed)
-					musb_dma_completion(musb, index + 1, 1);
+				musb_dma_completion(musb, index + 1, 1);
 
 			} else {
 				/* Bigger transfer than we could fit in
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 338cd1611ab..0112353ec97 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2170,26 +2170,22 @@ static int musb_suspend(struct platform_device *pdev, pm_message_t message)
 	return 0;
 }
 
-static int musb_resume(struct platform_device *pdev)
+static int musb_resume_early(struct platform_device *pdev)
 {
-	unsigned long	flags;
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 
 	if (!musb->clock)
 		return 0;
 
-	spin_lock_irqsave(&musb->lock, flags);
-
 	if (musb->set_clock)
 		musb->set_clock(musb->clock, 1);
 	else
 		clk_enable(musb->clock);
 
 	/* for static cmos like DaVinci, register values were preserved
-	 * unless for some reason the whole soc powered down and we're
-	 * not treating that as a whole-system restart (e.g. swsusp)
+	 * unless for some reason the whole soc powered down or the USB
+	 * module got reset through the PSC (vs just being disabled).
 	 */
-	spin_unlock_irqrestore(&musb->lock, flags);
 	return 0;
 }
 
@@ -2207,7 +2203,7 @@ static struct platform_driver musb_driver = {
 	.remove		= __devexit_p(musb_remove),
 	.shutdown	= musb_shutdown,
 	.suspend	= musb_suspend,
-	.resume		= musb_resume,
+	.resume_early	= musb_resume_early,
 };
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index c7ebd0867fc..f79440cdfe7 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -165,9 +165,15 @@ static void nuke(struct musb_ep *ep, const int status)
 	if (is_dma_capable() && ep->dma) {
 		struct dma_controller	*c = ep->musb->dma_controller;
 		int value;
+
 		if (ep->is_in) {
+			/*
+			 * The programming guide says that we must not clear
+			 * the DMAMODE bit before DMAENAB, so we only
+			 * clear it in the second write...
+			 */
 			musb_writew(epio, MUSB_TXCSR,
-					0 | MUSB_TXCSR_FLUSHFIFO);
+				    MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO);
 			musb_writew(epio, MUSB_TXCSR,
 					0 | MUSB_TXCSR_FLUSHFIFO);
 		} else {
@@ -230,7 +236,7 @@ static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
 		  |	IN token(s) are recd from Host.
 		  |		-> DMA interrupt on completion
 		  |		   calls TxAvail.
-		  |		      -> stop DMA, ~DmaEenab,
+		  |		      -> stop DMA, ~DMAENAB,
 		  |		      -> set TxPktRdy for last short pkt or zlp
 		  |		      -> Complete Request
 		  |		      -> Continue next request (call txstate)
@@ -315,9 +321,17 @@ static void txstate(struct musb *musb, struct musb_request *req)
 					request->dma, request_size);
 			if (use_dma) {
 				if (musb_ep->dma->desired_mode == 0) {
-					/* ASSERT: DMAENAB is clear */
-					csr &= ~(MUSB_TXCSR_AUTOSET |
-							MUSB_TXCSR_DMAMODE);
+					/*
+					 * We must not clear the DMAMODE bit
+					 * before the DMAENAB bit -- and the
+					 * latter doesn't always get cleared
+					 * before we get here...
+					 */
+					csr &= ~(MUSB_TXCSR_AUTOSET
+						| MUSB_TXCSR_DMAENAB);
+					musb_writew(epio, MUSB_TXCSR, csr
+						| MUSB_TXCSR_P_WZC_BITS);
+					csr &= ~MUSB_TXCSR_DMAMODE;
 					csr |= (MUSB_TXCSR_DMAENAB |
 							MUSB_TXCSR_MODE);
 					/* against programming guide */
@@ -334,10 +348,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
 
 #elif defined(CONFIG_USB_TI_CPPI_DMA)
 		/* program endpoint CSR first, then setup DMA */
-		csr &= ~(MUSB_TXCSR_AUTOSET
-				| MUSB_TXCSR_DMAMODE
-				| MUSB_TXCSR_P_UNDERRUN
-				| MUSB_TXCSR_TXPKTRDY);
+		csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
 		csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
 		musb_writew(epio, MUSB_TXCSR,
 			(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
@@ -364,8 +375,8 @@ static void txstate(struct musb *musb, struct musb_request *req)
 		if (!use_dma) {
 			c->channel_release(musb_ep->dma);
 			musb_ep->dma = NULL;
-			/* ASSERT: DMAENAB clear */
-			csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+			csr &= ~MUSB_TXCSR_DMAENAB;
+			musb_writew(epio, MUSB_TXCSR, csr);
 			/* invariant: prequest->buf is non-null */
 		}
 #elif defined(CONFIG_USB_TUSB_OMAP_DMA)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 499c431a6d6..db1b57415ec 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -4,6 +4,7 @@
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -96,8 +97,8 @@
 
 
 static void musb_ep_program(struct musb *musb, u8 epnum,
-			struct urb *urb, unsigned int nOut,
-			u8 *buf, u32 len);
+			struct urb *urb, int is_out,
+			u8 *buf, u32 offset, u32 len);
 
 /*
  * Clear TX fifo. Needed to avoid BABBLE errors.
@@ -125,6 +126,29 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
 	}
 }
 
+static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep)
+{
+	void __iomem	*epio = ep->regs;
+	u16		csr;
+	int		retries = 5;
+
+	/* scrub any data left in the fifo */
+	do {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY)))
+			break;
+		musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		udelay(10);
+	} while (--retries);
+
+	WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n",
+			ep->epnum, csr);
+
+	/* and reset for the next transfer */
+	musb_writew(epio, MUSB_TXCSR, 0);
+}
+
 /*
  * Start transmit. Caller is responsible for locking shared resources.
  * musb must be locked.
@@ -145,13 +169,15 @@ static inline void musb_h_tx_start(struct musb_hw_ep *ep)
 
 }
 
-static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
+static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
 {
 	u16	txcsr;
 
 	/* NOTE: no locks here; caller should lock and select EP */
 	txcsr = musb_readw(ep->regs, MUSB_TXCSR);
 	txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+	if (is_cppi_enabled())
+		txcsr |= MUSB_TXCSR_DMAMODE;
 	musb_writew(ep->regs, MUSB_TXCSR, txcsr);
 }
 
@@ -166,9 +192,10 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 {
 	u16			frame;
 	u32			len;
-	void			*buf;
 	void __iomem		*mbase =  musb->mregs;
 	struct urb		*urb = next_urb(qh);
+	void			*buf = urb->transfer_buffer;
+	u32			offset = 0;
 	struct musb_hw_ep	*hw_ep = qh->hw_ep;
 	unsigned		pipe = urb->pipe;
 	u8			address = usb_pipedevice(pipe);
@@ -191,7 +218,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 	case USB_ENDPOINT_XFER_ISOC:
 		qh->iso_idx = 0;
 		qh->frame = 0;
-		buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+		offset = urb->iso_frame_desc[0].offset;
 		len = urb->iso_frame_desc[0].length;
 		break;
 	default:		/* bulk, interrupt */
@@ -209,14 +236,14 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 			case USB_ENDPOINT_XFER_ISOC:	s = "-iso"; break;
 			default:			s = "-intr"; break;
 			}; s; }),
-			epnum, buf, len);
+			epnum, buf + offset, len);
 
 	/* Configure endpoint */
 	if (is_in || hw_ep->is_shared_fifo)
 		hw_ep->in_qh = qh;
 	else
 		hw_ep->out_qh = qh;
-	musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+	musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
 
 	/* transmit may have more work: start it when it is time */
 	if (is_in)
@@ -227,7 +254,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 	case USB_ENDPOINT_XFER_ISOC:
 	case USB_ENDPOINT_XFER_INT:
 		DBG(3, "check whether there's still time for periodic Tx\n");
-		qh->iso_idx = 0;
 		frame = musb_readw(mbase, MUSB_FRAME);
 		/* FIXME this doesn't implement that scheduling policy ...
 		 * or handle framecounter wrapping
@@ -256,7 +282,7 @@ start:
 		if (!hw_ep->tx_channel)
 			musb_h_tx_start(hw_ep);
 		else if (is_cppi_enabled() || tusb_dma_omap())
-			cppi_host_txdma_start(hw_ep);
+			musb_h_tx_dma_start(hw_ep);
 	}
 }
 
@@ -567,10 +593,17 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
 		csr = musb_readw(ep->regs, MUSB_TXCSR);
 		if (csr & MUSB_TXCSR_MODE) {
 			musb_h_tx_flush_fifo(ep);
+			csr = musb_readw(ep->regs, MUSB_TXCSR);
 			musb_writew(ep->regs, MUSB_TXCSR,
-					MUSB_TXCSR_FRCDATATOG);
+				    csr | MUSB_TXCSR_FRCDATATOG);
 		}
-		/* clear mode (and everything else) to enable Rx */
+
+		/*
+		 * Clear the MODE bit (and everything else) to enable Rx.
+		 * NOTE: we mustn't clear the DMAMODE bit before DMAENAB.
+		 */
+		if (csr & MUSB_TXCSR_DMAMODE)
+			musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
 		musb_writew(ep->regs, MUSB_TXCSR, 0);
 
 	/* scrub all previous state, clearing toggle */
@@ -601,14 +634,68 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
 	ep->rx_reinit = 0;
 }
 
+static bool musb_tx_dma_program(struct dma_controller *dma,
+		struct musb_hw_ep *hw_ep, struct musb_qh *qh,
+		struct urb *urb, u32 offset, u32 length)
+{
+	struct dma_channel	*channel = hw_ep->tx_channel;
+	void __iomem		*epio = hw_ep->regs;
+	u16			pkt_size = qh->maxpacket;
+	u16			csr;
+	u8			mode;
+
+#ifdef	CONFIG_USB_INVENTRA_DMA
+	if (length > channel->max_len)
+		length = channel->max_len;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	if (length > pkt_size) {
+		mode = 1;
+		csr |= MUSB_TXCSR_AUTOSET
+			| MUSB_TXCSR_DMAMODE
+			| MUSB_TXCSR_DMAENAB;
+	} else {
+		mode = 0;
+		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
+		csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
+	}
+	channel->desired_mode = mode;
+	musb_writew(epio, MUSB_TXCSR, csr);
+#else
+	if (!is_cppi_enabled() && !tusb_dma_omap())
+		return false;
+
+	channel->actual_len = 0;
+
+	/*
+	 * TX uses "RNDIS" mode automatically but needs help
+	 * to identify the zero-length-final-packet case.
+	 */
+	mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0;
+#endif
+
+	qh->segsize = length;
+
+	if (!dma->channel_program(channel, pkt_size, mode,
+			urb->transfer_dma + offset, length)) {
+		dma->channel_release(channel);
+		hw_ep->tx_channel = NULL;
+
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+		musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS);
+		return false;
+	}
+	return true;
+}
 
 /*
  * Program an HDRC endpoint as per the given URB
  * Context: irqs blocked, controller lock held
  */
 static void musb_ep_program(struct musb *musb, u8 epnum,
-			struct urb *urb, unsigned int is_out,
-			u8 *buf, u32 len)
+			struct urb *urb, int is_out,
+			u8 *buf, u32 offset, u32 len)
 {
 	struct dma_controller	*dma_controller;
 	struct dma_channel	*dma_channel;
@@ -667,12 +754,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 
 		/* general endpoint setup */
 		if (epnum) {
-			/* ASSERT:  TXCSR_DMAENAB was already cleared */
-
 			/* flush all old state, set default */
 			musb_h_tx_flush_fifo(hw_ep);
+
+			/*
+			 * We must not clear the DMAMODE bit before or in
+			 * the same cycle with the DMAENAB bit, so we clear
+			 * the latter first...
+			 */
 			csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
-					| MUSB_TXCSR_DMAMODE
+					| MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAENAB
 					| MUSB_TXCSR_FRCDATATOG
 					| MUSB_TXCSR_H_RXSTALL
 					| MUSB_TXCSR_H_ERROR
@@ -680,24 +772,20 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 					);
 			csr |= MUSB_TXCSR_MODE;
 
-			if (usb_gettoggle(urb->dev,
-					qh->epnum, 1))
+			if (usb_gettoggle(urb->dev, qh->epnum, 1))
 				csr |= MUSB_TXCSR_H_WR_DATATOGGLE
 					| MUSB_TXCSR_H_DATATOGGLE;
 			else
 				csr |= MUSB_TXCSR_CLRDATATOG;
 
-			/* twice in case of double packet buffering */
 			musb_writew(epio, MUSB_TXCSR, csr);
 			/* REVISIT may need to clear FLUSHFIFO ... */
+			csr &= ~MUSB_TXCSR_DMAMODE;
 			musb_writew(epio, MUSB_TXCSR, csr);
 			csr = musb_readw(epio, MUSB_TXCSR);
 		} else {
 			/* endpoint 0: just flush */
-			musb_writew(epio, MUSB_CSR0,
-				csr | MUSB_CSR0_FLUSHFIFO);
-			musb_writew(epio, MUSB_CSR0,
-				csr | MUSB_CSR0_FLUSHFIFO);
+			musb_h_ep0_flush_fifo(hw_ep);
 		}
 
 		/* target addr and (for multipoint) hub addr/port */
@@ -734,113 +822,14 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 		else
 			load_count = min((u32) packet_sz, len);
 
-#ifdef CONFIG_USB_INVENTRA_DMA
-		if (dma_channel) {
-
-			/* clear previous state */
-			csr = musb_readw(epio, MUSB_TXCSR);
-			csr &= ~(MUSB_TXCSR_AUTOSET
-				| MUSB_TXCSR_DMAMODE
-				| MUSB_TXCSR_DMAENAB);
-			csr |= MUSB_TXCSR_MODE;
-			musb_writew(epio, MUSB_TXCSR,
-				csr | MUSB_TXCSR_MODE);
-
-			qh->segsize = min(len, dma_channel->max_len);
-
-			if (qh->segsize <= packet_sz)
-				dma_channel->desired_mode = 0;
-			else
-				dma_channel->desired_mode = 1;
-
-
-			if (dma_channel->desired_mode == 0) {
-				csr &= ~(MUSB_TXCSR_AUTOSET
-					| MUSB_TXCSR_DMAMODE);
-				csr |= (MUSB_TXCSR_DMAENAB);
-					/* against programming guide */
-			} else
-				csr |= (MUSB_TXCSR_AUTOSET
-					| MUSB_TXCSR_DMAENAB
-					| MUSB_TXCSR_DMAMODE);
-
-			musb_writew(epio, MUSB_TXCSR, csr);
-
-			dma_ok = dma_controller->channel_program(
-					dma_channel, packet_sz,
-					dma_channel->desired_mode,
-					urb->transfer_dma,
-					qh->segsize);
-			if (dma_ok) {
-				load_count = 0;
-			} else {
-				dma_controller->channel_release(dma_channel);
-				if (is_out)
-					hw_ep->tx_channel = NULL;
-				else
-					hw_ep->rx_channel = NULL;
-				dma_channel = NULL;
-			}
-		}
-#endif
-
-		/* candidate for DMA */
-		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
-
-			/* program endpoint CSRs first, then setup DMA.
-			 * assume CPPI setup succeeds.
-			 * defer enabling dma.
-			 */
-			csr = musb_readw(epio, MUSB_TXCSR);
-			csr &= ~(MUSB_TXCSR_AUTOSET
-					| MUSB_TXCSR_DMAMODE
-					| MUSB_TXCSR_DMAENAB);
-			csr |= MUSB_TXCSR_MODE;
-			musb_writew(epio, MUSB_TXCSR,
-				csr | MUSB_TXCSR_MODE);
-
-			dma_channel->actual_len = 0L;
-			qh->segsize = len;
-
-			/* TX uses "rndis" mode automatically, but needs help
-			 * to identify the zero-length-final-packet case.
-			 */
-			dma_ok = dma_controller->channel_program(
-					dma_channel, packet_sz,
-					(urb->transfer_flags
-							& URB_ZERO_PACKET)
-						== URB_ZERO_PACKET,
-					urb->transfer_dma,
-					qh->segsize);
-			if (dma_ok) {
-				load_count = 0;
-			} else {
-				dma_controller->channel_release(dma_channel);
-				hw_ep->tx_channel = NULL;
-				dma_channel = NULL;
-
-				/* REVISIT there's an error path here that
-				 * needs handling:  can't do dma, but
-				 * there's no pio buffer address...
-				 */
-			}
-		}
+		if (dma_channel && musb_tx_dma_program(dma_controller,
+					hw_ep, qh, urb, offset, len))
+			load_count = 0;
 
 		if (load_count) {
-			/* ASSERT:  TXCSR_DMAENAB was already cleared */
-
 			/* PIO to load FIFO */
 			qh->segsize = load_count;
 			musb_write_fifo(hw_ep, load_count, buf);
-			csr = musb_readw(epio, MUSB_TXCSR);
-			csr &= ~(MUSB_TXCSR_DMAENAB
-				| MUSB_TXCSR_DMAMODE
-				| MUSB_TXCSR_AUTOSET);
-			/* write CSR */
-			csr |= MUSB_TXCSR_MODE;
-
-			if (epnum)
-				musb_writew(epio, MUSB_TXCSR, csr);
 		}
 
 		/* re-enable interrupt */
@@ -895,7 +884,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 						dma_channel, packet_sz,
 						!(urb->transfer_flags
 							& URB_SHORT_NOT_OK),
-						urb->transfer_dma,
+						urb->transfer_dma + offset,
 						qh->segsize);
 				if (!dma_ok) {
 					dma_controller->channel_release(
@@ -1063,11 +1052,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
 			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
 			musb_writew(epio, MUSB_CSR0, csr);
 		} else {
-			csr |= MUSB_CSR0_FLUSHFIFO;
-			musb_writew(epio, MUSB_CSR0, csr);
-			musb_writew(epio, MUSB_CSR0, csr);
-			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
-			musb_writew(epio, MUSB_CSR0, csr);
+			musb_h_ep0_flush_fifo(hw_ep);
 		}
 
 		musb_writeb(epio, MUSB_NAKLIMIT0, 0);
@@ -1081,10 +1066,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
 		 * SHOULD NEVER HAPPEN! */
 		ERR("no URB for end 0\n");
 
-		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
-		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
-		musb_writew(epio, MUSB_CSR0, 0);
-
+		musb_h_ep0_flush_fifo(hw_ep);
 		goto done;
 	}
 
@@ -1145,8 +1127,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	int			pipe;
 	bool			done = false;
 	u16			tx_csr;
-	size_t			wLength = 0;
-	u8			*buf = NULL;
+	size_t			length = 0;
+	size_t			offset = 0;
 	struct urb		*urb;
 	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
 	void __iomem		*epio = hw_ep->regs;
@@ -1164,7 +1146,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	/* with CPPI, DMA sometimes triggers "extra" irqs */
 	if (!urb) {
 		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
-		goto finish;
+		return;
 	}
 
 	pipe = urb->pipe;
@@ -1201,7 +1183,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 		musb_writew(epio, MUSB_TXCSR,
 				MUSB_TXCSR_H_WZC_BITS
 				| MUSB_TXCSR_TXPKTRDY);
-		goto finish;
+		return;
 	}
 
 	if (status) {
@@ -1233,29 +1215,89 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	/* second cppi case */
 	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
 		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
-		goto finish;
+		return;
+	}
+
+	if (is_dma_capable() && dma && !status) {
+		/*
+		 * DMA has completed.  But if we're using DMA mode 1 (multi
+		 * packet DMA), we need a terminal TXPKTRDY interrupt before
+		 * we can consider this transfer completed, lest we trash
+		 * its last packet when writing the next URB's data.  So we
+		 * switch back to mode 0 to get that interrupt; we'll come
+		 * back here once it happens.
+		 */
+		if (tx_csr & MUSB_TXCSR_DMAMODE) {
+			/*
+			 * We shouldn't clear DMAMODE with DMAENAB set; so
+			 * clear them in a safe order.  That should be OK
+			 * once TXPKTRDY has been set (and I've never seen
+			 * it being 0 at this moment -- DMA interrupt latency
+			 * is significant) but if it hasn't been then we have
+			 * no choice but to stop being polite and ignore the
+			 * programmer's guide... :-)
+			 *
+			 * Note that we must write TXCSR with TXPKTRDY cleared
+			 * in order not to re-trigger the packet send (this bit
+			 * can't be cleared by CPU), and there's another caveat:
+			 * TXPKTRDY may be set shortly and then cleared in the
+			 * double-buffered FIFO mode, so we do an extra TXCSR
+			 * read for debouncing...
+			 */
+			tx_csr &= musb_readw(epio, MUSB_TXCSR);
+			if (tx_csr & MUSB_TXCSR_TXPKTRDY) {
+				tx_csr &= ~(MUSB_TXCSR_DMAENAB |
+					    MUSB_TXCSR_TXPKTRDY);
+				musb_writew(epio, MUSB_TXCSR,
+					    tx_csr | MUSB_TXCSR_H_WZC_BITS);
+			}
+			tx_csr &= ~(MUSB_TXCSR_DMAMODE |
+				    MUSB_TXCSR_TXPKTRDY);
+			musb_writew(epio, MUSB_TXCSR,
+				    tx_csr | MUSB_TXCSR_H_WZC_BITS);
+
+			/*
+			 * There is no guarantee that we'll get an interrupt
+			 * after clearing DMAMODE as we might have done this
+			 * too late (after TXPKTRDY was cleared by controller).
+			 * Re-read TXCSR as we have spoiled its previous value.
+			 */
+			tx_csr = musb_readw(epio, MUSB_TXCSR);
+		}
 
+		/*
+		 * We may get here from a DMA completion or TXPKTRDY interrupt.
+		 * In any case, we must check the FIFO status here and bail out
+		 * only if the FIFO still has data -- that should prevent the
+		 * "missed" TXPKTRDY interrupts and deal with double-buffered
+		 * FIFO mode too...
+		 */
+		if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) {
+			DBG(2, "DMA complete but packet still in FIFO, "
+			    "CSR %04x\n", tx_csr);
+			return;
+		}
 	}
 
-	/* REVISIT this looks wrong... */
 	if (!status || dma || usb_pipeisoc(pipe)) {
 		if (dma)
-			wLength = dma->actual_len;
+			length = dma->actual_len;
 		else
-			wLength = qh->segsize;
-		qh->offset += wLength;
+			length = qh->segsize;
+		qh->offset += length;
 
 		if (usb_pipeisoc(pipe)) {
 			struct usb_iso_packet_descriptor	*d;
 
 			d = urb->iso_frame_desc + qh->iso_idx;
-			d->actual_length = qh->segsize;
+			d->actual_length = length;
+			d->status = status;
 			if (++qh->iso_idx >= urb->number_of_packets) {
 				done = true;
 			} else {
 				d++;
-				buf = urb->transfer_buffer + d->offset;
-				wLength = d->length;
+				offset = d->offset;
+				length = d->length;
 			}
 		} else if (dma) {
 			done = true;
@@ -1268,10 +1310,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 						& URB_ZERO_PACKET))
 				done = true;
 			if (!done) {
-				buf = urb->transfer_buffer
-						+ qh->offset;
-				wLength = urb->transfer_buffer_length
-						- qh->offset;
+				offset = qh->offset;
+				length = urb->transfer_buffer_length - offset;
 			}
 		}
 	}
@@ -1290,28 +1330,31 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 		urb->status = status;
 		urb->actual_length = qh->offset;
 		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+		return;
+	} else	if (usb_pipeisoc(pipe) && dma) {
+		if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
+				offset, length))
+			return;
+	} else	if (tx_csr & MUSB_TXCSR_DMAENAB) {
+		DBG(1, "not complete, but DMA enabled?\n");
+		return;
+	}
 
-	} else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
-		/* WARN_ON(!buf); */
-
-		/* REVISIT:  some docs say that when hw_ep->tx_double_buffered,
-		 * (and presumably, fifo is not half-full) we should write TWO
-		 * packets before updating TXCSR ... other docs disagree ...
-		 */
-		/* PIO:  start next packet in this URB */
-		if (wLength > qh->maxpacket)
-			wLength = qh->maxpacket;
-		musb_write_fifo(hw_ep, wLength, buf);
-		qh->segsize = wLength;
-
-		musb_ep_select(mbase, epnum);
-		musb_writew(epio, MUSB_TXCSR,
-				MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
-	} else
-		DBG(1, "not complete, but dma enabled?\n");
+	/*
+	 * PIO: start next packet in this URB.
+	 *
+	 * REVISIT: some docs say that when hw_ep->tx_double_buffered,
+	 * (and presumably, FIFO is not half-full) we should write *two*
+	 * packets before updating TXCSR; other docs disagree...
+	 */
+	if (length > qh->maxpacket)
+		length = qh->maxpacket;
+	musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
+	qh->segsize = length;
 
-finish:
-	return;
+	musb_ep_select(mbase, epnum);
+	musb_writew(epio, MUSB_TXCSR,
+			MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
 }
 
 
@@ -1841,7 +1884,7 @@ static int musb_urb_enqueue(
 	unsigned long			flags;
 	struct musb			*musb = hcd_to_musb(hcd);
 	struct usb_host_endpoint	*hep = urb->ep;
-	struct musb_qh			*qh = hep->hcpriv;
+	struct musb_qh			*qh;
 	struct usb_endpoint_descriptor	*epd = &hep->desc;
 	int				ret;
 	unsigned			type_reg;
@@ -1853,22 +1896,21 @@ static int musb_urb_enqueue(
 
 	spin_lock_irqsave(&musb->lock, flags);
 	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	qh = ret ? NULL : hep->hcpriv;
+	if (qh)
+		urb->hcpriv = qh;
 	spin_unlock_irqrestore(&musb->lock, flags);
-	if (ret)
-		return ret;
 
 	/* DMA mapping was already done, if needed, and this urb is on
-	 * hep->urb_list ... so there's little to do unless hep wasn't
-	 * yet scheduled onto a live qh.
+	 * hep->urb_list now ... so we're done, unless hep wasn't yet
+	 * scheduled onto a live qh.
 	 *
 	 * REVISIT best to keep hep->hcpriv valid until the endpoint gets
 	 * disabled, testing for empty qh->ring and avoiding qh setup costs
 	 * except for the first urb queued after a config change.
 	 */
-	if (qh) {
-		urb->hcpriv = qh;
-		return 0;
-	}
+	if (qh || ret)
+		return ret;
 
 	/* Allocate and initialize qh, minimizing the work done each time
 	 * hw_ep gets reprogrammed, or with irqs blocked.  Then schedule it.
@@ -2044,7 +2086,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
 		 * endpoint's irq status here to avoid bogus irqs.
 		 * clearing that status is platform-specific...
 		 */
-	} else {
+	} else if (ep->epnum) {
 		musb_h_tx_flush_fifo(ep);
 		csr = musb_readw(epio, MUSB_TXCSR);
 		csr &= ~(MUSB_TXCSR_AUTOSET
@@ -2058,6 +2100,8 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
 		musb_writew(epio, MUSB_TXCSR, csr);
 		/* flush cpu writebuffer */
 		csr = musb_readw(epio, MUSB_TXCSR);
+	} else  {
+		musb_h_ep0_flush_fifo(ep);
 	}
 	if (status == 0)
 		musb_advance_schedule(ep->musb, urb, ep, is_in);
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 8662e9e159c..5e83f96d6b7 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -195,30 +195,32 @@ static int dma_channel_abort(struct dma_channel *channel)
 	void __iomem *mbase = musb_channel->controller->base;
 
 	u8 bchannel = musb_channel->idx;
+	int offset;
 	u16 csr;
 
 	if (channel->status == MUSB_DMA_STATUS_BUSY) {
 		if (musb_channel->transmit) {
-
-			csr = musb_readw(mbase,
-				MUSB_EP_OFFSET(musb_channel->epnum,
-						MUSB_TXCSR));
-			csr &= ~(MUSB_TXCSR_AUTOSET |
-				 MUSB_TXCSR_DMAENAB |
-				 MUSB_TXCSR_DMAMODE);
-			musb_writew(mbase,
-				MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR),
-				csr);
+			offset = MUSB_EP_OFFSET(musb_channel->epnum,
+						MUSB_TXCSR);
+
+			/*
+			 * The programming guide says that we must clear
+			 * the DMAENAB bit before the DMAMODE bit...
+			 */
+			csr = musb_readw(mbase, offset);
+			csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+			musb_writew(mbase, offset, csr);
+			csr &= ~MUSB_TXCSR_DMAMODE;
+			musb_writew(mbase, offset, csr);
 		} else {
-			csr = musb_readw(mbase,
-				MUSB_EP_OFFSET(musb_channel->epnum,
-						MUSB_RXCSR));
+			offset = MUSB_EP_OFFSET(musb_channel->epnum,
+						MUSB_RXCSR);
+
+			csr = musb_readw(mbase, offset);
 			csr &= ~(MUSB_RXCSR_AUTOCLEAR |
 				 MUSB_RXCSR_DMAENAB |
 				 MUSB_RXCSR_DMAMODE);
-			musb_writew(mbase,
-				MUSB_EP_OFFSET(musb_channel->epnum, MUSB_RXCSR),
-				csr);
+			musb_writew(mbase, offset, csr);
 		}
 
 		musb_writew(mbase,
@@ -296,20 +298,28 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
 					&& ((channel->desired_mode == 0)
 					    || (channel->actual_len &
 					    (musb_channel->max_packet_sz - 1)))
-					 ) {
+				    ) {
+					u8  epnum  = musb_channel->epnum;
+					int offset = MUSB_EP_OFFSET(epnum,
+								    MUSB_TXCSR);
+					u16 txcsr;
+
+					/*
+					 * The programming guide says that we
+					 * must clear DMAENAB before DMAMODE.
+					 */
+					musb_ep_select(mbase, epnum);
+					txcsr = musb_readw(mbase, offset);
+					txcsr &= ~(MUSB_TXCSR_DMAENAB
+							| MUSB_TXCSR_AUTOSET);
+					musb_writew(mbase, offset, txcsr);
 					/* Send out the packet */
-					musb_ep_select(mbase,
-						musb_channel->epnum);
-					musb_writew(mbase, MUSB_EP_OFFSET(
-							musb_channel->epnum,
-							MUSB_TXCSR),
-						MUSB_TXCSR_TXPKTRDY);
-				} else {
-					musb_dma_completion(
-						musb,
-						musb_channel->epnum,
-						musb_channel->transmit);
+					txcsr &= ~MUSB_TXCSR_DMAMODE;
+					txcsr |=  MUSB_TXCSR_TXPKTRDY;
+					musb_writew(mbase, offset, txcsr);
 				}
+				musb_dma_completion(musb, musb_channel->epnum,
+						    musb_channel->transmit);
 			}
 		}
 	}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index dcc87aaa862..8100f1d2590 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -668,6 +668,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(DE_VID, WHT_PID) },
 	{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index daaf63db0b5..c09f658a448 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -913,6 +913,13 @@
 #define ADI_GNICE_PID 		0xF000
 
 /*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/products/sys/scb/scb1201.php
+ */
+#define JETI_VID		0x0c6c
+#define JETI_SPC1201_PID	0x04b2
+
+/*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
  *   wValue:         0
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index 2e8e05462ef..b66b71ccd12 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -25,6 +25,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x05c6, 0x3197) },	/* unknown Motorola phone */
 	{ USB_DEVICE(0x0c44, 0x0022) },	/* unknown Mororola phone */
 	{ USB_DEVICE(0x22b8, 0x2a64) },	/* Motorola KRZR K1m */
+	{ USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index d560c0b54e6..47bd070f24b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -300,6 +300,10 @@ static int  option_resume(struct usb_serial *serial);
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
 
+#define DLINK_VENDOR_ID				0x1186
+#define DLINK_PRODUCT_DWM_652			0x3e04
+
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -516,6 +520,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
 	{ } /* Terminating entry */
 };
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index e6d6b0c17fd..7528b8d57f1 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -26,6 +26,27 @@ static struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
+	{USB_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
+	{USB_DEVICE(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
+	{USB_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
+	{USB_DEVICE(0x413c, 0x8171)},	/* Dell Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
+	{USB_DEVICE(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
+	{USB_DEVICE(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
+	{USB_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
+	{USB_DEVICE(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
+	{USB_DEVICE(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
+	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 5be54c01966..ef7e5a8ceab 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -17,7 +17,8 @@ usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
 ifeq ($(CONFIG_USB_LIBUSUAL),)
 	usb-storage-objs	+= usual-tables.o
 else
-	obj-$(CONFIG_USB)	+= libusual.o usual-tables.o
+	obj-$(CONFIG_USB)	+= usb-libusual.o
+	usb-libusual-objs	:= libusual.o usual-tables.o
 endif
 
 obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= ums-alauda.o
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 49aedb36dc1..fcb32021721 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -247,10 +247,8 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe)
 		USB_ENDPOINT_HALT, endp,
 		NULL, 0, 3*HZ);
 
-	/* reset the endpoint toggle */
 	if (result >= 0)
-		usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe),
-				usb_pipeout(pipe), 0);
+		usb_reset_endpoint(us->pusb_dev, endp);
 
 	US_DEBUGP("%s: result = %d\n", __func__, result);
 	return result;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1c1f643e8a7..96db479d116 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -975,12 +975,14 @@ UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
 
-/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
+/* Reported by Rauch Wolke <rauchwolke@gmx.net>
+ * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
+ */
 UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
 		"Simple Tech/Datafab",
 		"CF+SM Reader",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_IGNORE_RESIDUE ),
+		US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
 
 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
  * to the USB storage specification in two ways:
@@ -1376,6 +1378,14 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		0),
 
+/* Reported by Pascal Terjan <pterjan@mandriva.com>
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+UNUSUAL_DEV(  0x1186, 0x3e04, 0x0000, 0x0000,
+           "D-Link",
+           "USB Mass Storage",
+           US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0),
+
 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
  * which instructs the device to load as a modem
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 386eaa22d21..4ac4300a3f9 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -267,6 +267,8 @@ static void wusbhc_devconnect_acked_work(struct work_struct *work)
 	mutex_lock(&wusbhc->mutex);
 	wusbhc_devconnect_acked(wusbhc, wusb_dev);
 	mutex_unlock(&wusbhc->mutex);
+
+	wusb_dev_put(wusb_dev);
 }
 
 /*
@@ -396,7 +398,8 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc,
 
 	/* After a device disconnects, change the GTK (see [WUSB]
 	 * section 6.2.11.2). */
-	wusbhc_gtk_rekey(wusbhc);
+	if (wusbhc->active)
+		wusbhc_gtk_rekey(wusbhc);
 
 	/* The Wireless USB part has forgotten about the device already; now
 	 * khubd's timer will pick up the disconnection and remove the USB
@@ -1084,15 +1087,21 @@ error_mmcie_set:
  * wusbhc_devconnect_stop - stop managing connected devices
  * @wusbhc: the WUSB HC
  *
- * Removes the Host Info IE and stops the keep alives.
- *
- * FIXME: should this disconnect all devices?
+ * Disconnects any devices still connected, stops the keep alives and
+ * removes the Host Info IE.
  */
 void wusbhc_devconnect_stop(struct wusbhc *wusbhc)
 {
-	cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
-	WARN_ON(!list_empty(&wusbhc->cack_list));
+	int i;
 
+	mutex_lock(&wusbhc->mutex);
+	for (i = 0; i < wusbhc->ports_max; i++) {
+		if (wusbhc->port[i].wusb_dev)
+			__wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]);
+	}
+	mutex_unlock(&wusbhc->mutex);
+
+	cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
 	wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr);
 	kfree(wusbhc->wuie_host_info);
 	wusbhc->wuie_host_info = NULL;
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index 07c63a31c79..ee6256f2363 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -88,33 +88,31 @@ static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show,
 					     wusb_trust_timeout_store);
 
 /*
- * Show & store the current WUSB CHID
+ * Show the current WUSB CHID.
  */
 static ssize_t wusb_chid_show(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
 	struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+	const struct wusb_ckhdid *chid;
 	ssize_t result = 0;
 
 	if (wusbhc->wuie_host_info != NULL)
-		result += ckhdid_printf(buf, PAGE_SIZE,
-					&wusbhc->wuie_host_info->CHID);
+		chid = &wusbhc->wuie_host_info->CHID;
+	else
+		chid = &wusb_ckhdid_zero;
+
+	result += ckhdid_printf(buf, PAGE_SIZE, chid);
+	result += sprintf(buf + result, "\n");
+
 	return result;
 }
 
 /*
- * Store a new CHID
- *
- * This will (FIXME) trigger many changes.
- *
- * - Send an all zeros CHID and it will stop the controller
- * - Send a non-zero CHID and it will start it
- *   (unless it was started, it will just change the CHID,
- *   diconnecting all devices first).
+ * Store a new CHID.
  *
- * So first we scan the MMC we are sent and then we act on it.  We
- * read it in the same format as we print it, an ASCII string of 16
- * hex bytes.
+ * - Write an all zeros CHID and it will stop the controller
+ * - Write a non-zero CHID and it will start it.
  *
  * See wusbhc_chid_set() for more info.
  */
@@ -339,13 +337,15 @@ void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status)
 {
 	struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
 
-	if (status == 0) {
+	if (status == 0 && wusb_dev) {
 		wusb_dev->entry_ts = jiffies;
 
-		/* wusbhc_devconnect_acked() can't be called from from
+		/* wusbhc_devconnect_acked() can't be called from
 		   atomic context so defer it to a work queue. */
 		if (!list_empty(&wusb_dev->cack_node))
 			queue_work(wusbd, &wusb_dev->devconnect_acked_work);
+		else
+			wusb_dev_put(wusb_dev);
 	}
 
 	usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status);
diff --git a/fs/afs/file.c b/fs/afs/file.c
index 7a1d942ef68..0149dab365e 100644
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -102,6 +102,7 @@ int afs_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
+#ifdef CONFIG_AFS_FSCACHE
 /*
  * deal with notification that a page was read from the cache
  */
@@ -117,6 +118,7 @@ static void afs_file_readpage_read_complete(struct page *page,
 		SetPageUptodate(page);
 	unlock_page(page);
 }
+#endif
 
 /*
  * AFS read page from file, directory or symlink
diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig
index d0a69ff2537..182f9ffe2b5 100644
--- a/fs/fat/Kconfig
+++ b/fs/fat/Kconfig
@@ -95,3 +95,6 @@ config FAT_DEFAULT_IOCHARSET
 	  Note that "utf8" is not recommended for FAT filesystems.
 	  If unsure, you shouldn't set "utf8" here.
 	  See <file:Documentation/filesystems/vfat.txt> for more information.
+
+	  Enable any character sets you need in File Systems/Native Language
+	  Support.
diff --git a/fs/proc/base.c b/fs/proc/base.c
index f71559784bf..aa763ab0077 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -648,14 +648,14 @@ static unsigned mounts_poll(struct file *file, poll_table *wait)
 {
 	struct proc_mounts *p = file->private_data;
 	struct mnt_namespace *ns = p->ns;
-	unsigned res = 0;
+	unsigned res = POLLIN | POLLRDNORM;
 
 	poll_wait(file, &ns->poll, wait);
 
 	spin_lock(&vfsmount_lock);
 	if (p->event != ns->event) {
 		p->event = ns->event;
-		res = POLLERR;
+		res |= POLLERR | POLLPRI;
 	}
 	spin_unlock(&vfsmount_lock);
 
diff --git a/fs/splice.c b/fs/splice.c
index 5384a90665d..666953d59a3 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -614,7 +614,6 @@ static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
  * @actor:	handler that splices the data
  *
  * Description:
-
  *    This function loops over the pipe and calls @actor to do the
  *    actual moving of a single struct pipe_buffer to the desired
  *    destination.  It returns when there's no more buffers left in
@@ -711,7 +710,7 @@ EXPORT_SYMBOL(splice_from_pipe_next);
 
 /**
  * splice_from_pipe_begin - start splicing from pipe
- * @pipe:	pipe to splice from
+ * @sd:		information about the splice operation
  *
  * Description:
  *    This function should be called before a loop containing
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 289c43a4726..b1606e07b7a 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -446,11 +446,11 @@ static unsigned int sysfs_poll(struct file *filp, poll_table *wait)
 	if (buffer->event != atomic_read(&od->event))
 		goto trigger;
 
-	return 0;
+	return DEFAULT_POLLMASK;
 
  trigger:
 	buffer->needs_read_fill = 1;
-	return POLLERR|POLLPRI;
+	return DEFAULT_POLLMASK|POLLERR|POLLPRI;
 }
 
 void sysfs_notify_dirent(struct sysfs_dirent *sd)
@@ -667,6 +667,7 @@ struct sysfs_schedule_callback_struct {
 	struct work_struct	work;
 };
 
+static struct workqueue_struct *sysfs_workqueue;
 static DEFINE_MUTEX(sysfs_workq_mutex);
 static LIST_HEAD(sysfs_workq);
 static void sysfs_schedule_callback_work(struct work_struct *work)
@@ -715,11 +716,20 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *),
 	mutex_lock(&sysfs_workq_mutex);
 	list_for_each_entry_safe(ss, tmp, &sysfs_workq, workq_list)
 		if (ss->kobj == kobj) {
+			module_put(owner);
 			mutex_unlock(&sysfs_workq_mutex);
 			return -EAGAIN;
 		}
 	mutex_unlock(&sysfs_workq_mutex);
 
+	if (sysfs_workqueue == NULL) {
+		sysfs_workqueue = create_workqueue("sysfsd");
+		if (sysfs_workqueue == NULL) {
+			module_put(owner);
+			return -ENOMEM;
+		}
+	}
+
 	ss = kmalloc(sizeof(*ss), GFP_KERNEL);
 	if (!ss) {
 		module_put(owner);
@@ -735,7 +745,7 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *),
 	mutex_lock(&sysfs_workq_mutex);
 	list_add_tail(&ss->workq_list, &sysfs_workq);
 	mutex_unlock(&sysfs_workq_mutex);
-	schedule_work(&ss->work);
+	queue_work(sysfs_workqueue, &ss->work);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(sysfs_schedule_callback);
diff --git a/include/asm-arm/.gitignore b/include/asm-arm/.gitignore
deleted file mode 100644
index e02c15d158f..00000000000
--- a/include/asm-arm/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-arch
-mach-types.h
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index baabf33be24..a0d9422a156 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -70,7 +70,7 @@ extern int ddebug_remove_module(char *mod_name);
 		DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT };	\
 	if (__dynamic_dbg_enabled(descriptor))				\
 			dev_printk(KERN_DEBUG, dev,			\
-					KBUILD_MODNAME ": " pr_fmt(fmt),\
+					KBUILD_MODNAME ": " fmt,	\
 					##__VA_ARGS__);			\
 	} while (0)
 
diff --git a/include/linux/init.h b/include/linux/init.h
index 68cb0265d00..f121a7a10c3 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -247,6 +247,7 @@ struct obs_kernel_param {
 
 /* Relies on boot_command_line being set */
 void __init parse_early_param(void);
+void __init parse_early_options(char *cmdline);
 #endif /* __ASSEMBLY__ */
 
 /**
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index d9e75ec7def..883cd44ff76 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -377,6 +377,15 @@ static inline char *pack_hex_byte(char *buf, u8 byte)
 #define pr_cont(fmt, ...) \
 	printk(KERN_CONT fmt, ##__VA_ARGS__)
 
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
 /* If you are writing a driver, please use dev_dbg instead */
 #if defined(DEBUG)
 #define pr_debug(fmt, ...) \
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 76e470a299b..72736fd8223 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -77,4 +77,46 @@ extern int platform_driver_probe(struct platform_driver *driver,
 #define platform_get_drvdata(_dev)	dev_get_drvdata(&(_dev)->dev)
 #define platform_set_drvdata(_dev,data)	dev_set_drvdata(&(_dev)->dev, (data))
 
+/* early platform driver interface */
+struct early_platform_driver {
+	const char *class_str;
+	struct platform_driver *pdrv;
+	struct list_head list;
+	int requested_id;
+};
+
+#define EARLY_PLATFORM_ID_UNSET -2
+#define EARLY_PLATFORM_ID_ERROR -3
+
+extern int early_platform_driver_register(struct early_platform_driver *epdrv,
+					  char *buf);
+extern void early_platform_add_devices(struct platform_device **devs, int num);
+
+static inline int is_early_platform_device(struct platform_device *pdev)
+{
+	return !pdev->dev.driver;
+}
+
+extern void early_platform_driver_register_all(char *class_str);
+extern int early_platform_driver_probe(char *class_str,
+				       int nr_probe, int user_only);
+extern void early_platform_cleanup(void);
+
+
+#ifndef MODULE
+#define early_platform_init(class_string, platform_driver)		\
+static __initdata struct early_platform_driver early_driver = {		\
+	.class_str = class_string,					\
+	.pdrv = platform_driver,					\
+	.requested_id = EARLY_PLATFORM_ID_UNSET,			\
+};									\
+static int __init early_platform_driver_setup_func(char *buf)		\
+{									\
+	return early_platform_driver_register(&early_driver, buf);	\
+}									\
+early_param(class_string, early_platform_driver_setup_func)
+#else /* MODULE */
+#define early_platform_init(class_string, platform_driver)
+#endif /* MODULE */
+
 #endif /* _PLATFORM_DEVICE_H_ */
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 0cdda00f2b2..58b2aa5312b 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -161,9 +161,8 @@ struct rcu_data {
 	unsigned long offline_fqs;	/* Kicked due to being offline. */
 	unsigned long resched_ipi;	/* Sent a resched IPI. */
 
-	/* 5) state to allow this CPU to force_quiescent_state on others */
+	/* 5) For future __rcu_pending statistics. */
 	long n_rcu_pending;		/* rcu_pending() calls since boot. */
-	long n_rcu_pending_force_qs;	/* when to force quiescent states. */
 
 	int cpu;
 };
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index 05eab2f11e6..2ea20320c09 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -51,5 +51,6 @@ struct ads7846_platform_data {
 				 void **filter_data);
 	int	(*filter)	(void *filter_data, int data_idx, int *val);
 	void	(*filter_cleanup)(void *filter_data);
+	void	(*wait_for_sync)(void);
 };
 
diff --git a/include/linux/usb.h b/include/linux/usb.h
index c6b2ab41b90..3aa2cd1f8d0 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1387,6 +1387,7 @@ extern int usb_string(struct usb_device *dev, int index,
 extern int usb_clear_halt(struct usb_device *dev, int pipe);
 extern int usb_reset_configuration(struct usb_device *dev);
 extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
 
 /* this request isn't really synchronous, but it belongs with the others */
 extern int usb_driver_set_configuration(struct usb_device *udev, int config);
@@ -1491,14 +1492,6 @@ void usb_sg_wait(struct usb_sg_request *io);
 #define usb_pipecontrol(pipe)	(usb_pipetype((pipe)) == PIPE_CONTROL)
 #define usb_pipebulk(pipe)	(usb_pipetype((pipe)) == PIPE_BULK)
 
-/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
-#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
-#define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))
-#define usb_settoggle(dev, ep, out, bit) \
-		((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
-		 ((bit) << (ep)))
-
-
 static inline unsigned int __create_pipe(struct usb_device *dev,
 		unsigned int endpoint)
 {
diff --git a/init/main.c b/init/main.c
index 3585f073d63..3bbf93be744 100644
--- a/init/main.c
+++ b/init/main.c
@@ -492,6 +492,11 @@ static int __init do_early_param(char *param, char *val)
 	return 0;
 }
 
+void __init parse_early_options(char *cmdline)
+{
+	parse_args("early options", cmdline, NULL, 0, do_early_param);
+}
+
 /* Arch code calls this early on, or if not, just before other parsing. */
 void __init parse_early_param(void)
 {
@@ -503,7 +508,7 @@ void __init parse_early_param(void)
 
 	/* All fall through to do_early_param. */
 	strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-	parse_args("early options", tmp_cmdline, NULL, 0, do_early_param);
+	parse_early_options(tmp_cmdline);
 	done = 1;
 }
 
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 7f326692257..d2a372fb0b9 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -530,8 +530,6 @@ static void note_new_gpnum(struct rcu_state *rsp, struct rcu_data *rdp)
 	rdp->qs_pending = 1;
 	rdp->passed_quiesc = 0;
 	rdp->gpnum = rsp->gpnum;
-	rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
-				      RCU_JIFFIES_TILL_FORCE_QS;
 }
 
 /*
@@ -578,8 +576,6 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags)
 	rsp->gpnum++;
 	rsp->signaled = RCU_GP_INIT; /* Hold off force_quiescent_state. */
 	rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
-	rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
-				      RCU_JIFFIES_TILL_FORCE_QS;
 	record_gp_stall_check_time(rsp);
 	dyntick_record_completed(rsp, rsp->completed - 1);
 	note_new_gpnum(rsp, rdp);
@@ -1055,7 +1051,6 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed)
 {
 	unsigned long flags;
 	long lastcomp;
-	struct rcu_data *rdp = rsp->rda[smp_processor_id()];
 	struct rcu_node *rnp = rcu_get_root(rsp);
 	u8 signaled;
 
@@ -1066,16 +1061,13 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed)
 		return;	/* Someone else is already on the job. */
 	}
 	if (relaxed &&
-	    (long)(rsp->jiffies_force_qs - jiffies) >= 0 &&
-	    (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) >= 0)
+	    (long)(rsp->jiffies_force_qs - jiffies) >= 0)
 		goto unlock_ret; /* no emergency and done recently. */
 	rsp->n_force_qs++;
 	spin_lock(&rnp->lock);
 	lastcomp = rsp->completed;
 	signaled = rsp->signaled;
 	rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
-	rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
-				      RCU_JIFFIES_TILL_FORCE_QS;
 	if (lastcomp == rsp->gpnum) {
 		rsp->n_force_qs_ngp++;
 		spin_unlock(&rnp->lock);
@@ -1144,8 +1136,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
 	 * If an RCU GP has gone long enough, go check for dyntick
 	 * idle CPUs and, if needed, send resched IPIs.
 	 */
-	if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
-	    (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)
+	if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
 		force_quiescent_state(rsp, 1);
 
 	/*
@@ -1230,8 +1221,7 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 	if (unlikely(++rdp->qlen > qhimark)) {
 		rdp->blimit = LONG_MAX;
 		force_quiescent_state(rsp, 0);
-	} else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
-		   (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)
+	} else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
 		force_quiescent_state(rsp, 1);
 	local_irq_restore(flags);
 }
@@ -1290,8 +1280,7 @@ static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp)
 
 	/* Has an RCU GP gone long enough to send resched IPIs &c? */
 	if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) &&
-	    ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
-	     (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0))
+	    ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0))
 		return 1;
 
 	/* nothing to do */
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index 4ee954f6a8d..4b1875ba940 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -49,14 +49,12 @@ static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp)
 {
 	if (!rdp->beenonline)
 		return;
-	seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d rpfq=%ld rp=%x",
+	seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d",
 		   rdp->cpu,
 		   cpu_is_offline(rdp->cpu) ? '!' : ' ',
 		   rdp->completed, rdp->gpnum,
 		   rdp->passed_quiesc, rdp->passed_quiesc_completed,
-		   rdp->qs_pending,
-		   rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending,
-		   (int)(rdp->n_rcu_pending & 0xffff));
+		   rdp->qs_pending);
 #ifdef CONFIG_NO_HZ
 	seq_printf(m, " dt=%d/%d dn=%d df=%lu",
 		   rdp->dynticks->dynticks,
@@ -102,14 +100,12 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp)
 {
 	if (!rdp->beenonline)
 		return;
-	seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d,%ld,%ld",
+	seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d",
 		   rdp->cpu,
 		   cpu_is_offline(rdp->cpu) ? "\"Y\"" : "\"N\"",
 		   rdp->completed, rdp->gpnum,
 		   rdp->passed_quiesc, rdp->passed_quiesc_completed,
-		   rdp->qs_pending,
-		   rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending,
-		   rdp->n_rcu_pending);
+		   rdp->qs_pending);
 #ifdef CONFIG_NO_HZ
 	seq_printf(m, ",%d,%d,%d,%lu",
 		   rdp->dynticks->dynticks,
@@ -123,7 +119,7 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp)
 
 static int show_rcudata_csv(struct seq_file *m, void *unused)
 {
-	seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",\"rpfq\",\"rp\",");
+	seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",");
 #ifdef CONFIG_NO_HZ
 	seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\",");
 #endif /* #ifdef CONFIG_NO_HZ */
diff --git a/kernel/sched.c b/kernel/sched.c
index 5724508c3b6..b902e587a3a 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4846,7 +4846,7 @@ void scheduler_tick(void)
 #endif
 }
 
-unsigned long get_parent_ip(unsigned long addr)
+notrace unsigned long get_parent_ip(unsigned long addr)
 {
 	if (in_lock_functions(addr)) {
 		addr = CALLER_ADDR2;
@@ -7367,8 +7367,12 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level,
 		cpumask_or(groupmask, groupmask, sched_group_cpus(group));
 
 		cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group));
-		printk(KERN_CONT " %s (__cpu_power = %d)", str,
-						group->__cpu_power);
+
+		printk(KERN_CONT " %s", str);
+		if (group->__cpu_power != SCHED_LOAD_SCALE) {
+			printk(KERN_CONT " (__cpu_power = %d)",
+				group->__cpu_power);
+		}
 
 		group = group->next;
 	} while (group != sd->groups);
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 2fecefacdc5..b525dd34851 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -472,9 +472,9 @@ void tasklet_kill(struct tasklet_struct *t)
 		printk("Attempt to kill tasklet from interrupt\n");
 
 	while (test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) {
-		do
+		do {
 			yield();
-		while (test_bit(TASKLET_STATE_SCHED, &t->state));
+		} while (test_bit(TASKLET_STATE_SCHED, &t->state));
 	}
 	tasklet_unlock_wait(t);
 	clear_bit(TASKLET_STATE_SCHED, &t->state);
diff --git a/kernel/trace/trace_branch.c b/kernel/trace/trace_branch.c
index ad8c22efff4..8333715e406 100644
--- a/kernel/trace/trace_branch.c
+++ b/kernel/trace/trace_branch.c
@@ -155,6 +155,13 @@ static enum print_line_t trace_branch_print(struct trace_iterator *iter,
 	return TRACE_TYPE_HANDLED;
 }
 
+static void branch_print_header(struct seq_file *s)
+{
+	seq_puts(s, "#           TASK-PID    CPU#    TIMESTAMP  CORRECT"
+		"  FUNC:FILE:LINE\n");
+	seq_puts(s, "#              | |       |          |         |   "
+		"    |\n");
+}
 
 static struct trace_event trace_branch_event = {
 	.type		= TRACE_BRANCH,
@@ -169,6 +176,7 @@ static struct tracer branch_trace __read_mostly =
 #ifdef CONFIG_FTRACE_SELFTEST
 	.selftest	= trace_selftest_startup_branch,
 #endif /* CONFIG_FTRACE_SELFTEST */
+	.print_header	= branch_print_header,
 };
 
 __init static int init_branch_tracer(void)
diff --git a/kernel/trace/trace_power.c b/kernel/trace/trace_power.c
index bae791ebcc5..118439709fb 100644
--- a/kernel/trace/trace_power.c
+++ b/kernel/trace/trace_power.c
@@ -186,6 +186,12 @@ static enum print_line_t power_print_line(struct trace_iterator *iter)
 	return TRACE_TYPE_UNHANDLED;
 }
 
+static void power_print_header(struct seq_file *s)
+{
+	seq_puts(s, "#   TIMESTAMP      STATE  EVENT\n");
+	seq_puts(s, "#       |            |      |\n");
+}
+
 static struct tracer power_tracer __read_mostly =
 {
 	.name		= "power",
@@ -194,6 +200,7 @@ static struct tracer power_tracer __read_mostly =
 	.stop		= stop_power_trace,
 	.reset		= power_trace_reset,
 	.print_line	= power_print_line,
+	.print_header	= power_print_header,
 };
 
 static int init_power_trace(void)
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index dafeecf5b14..920a3ca6e25 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -328,7 +328,7 @@ static int __init kobject_uevent_init(void)
 		       "kobject_uevent: unable to create netlink socket!\n");
 		return -ENODEV;
 	}
-
+	netlink_set_nonroot(NETLINK_KOBJECT_UEVENT, NL_NONROOT_RECV);
 	return 0;
 }