aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/boot/compressed/head.S46
-rw-r--r--arch/arm/common/rtctime.c15
-rw-r--r--arch/arm/configs/at91rm9200dk_defconfig1009
-rw-r--r--arch/arm/configs/at91rm9200ek_defconfig998
-rw-r--r--arch/arm/configs/csb337_defconfig1136
-rw-r--r--arch/arm/configs/csb637_defconfig1116
-rw-r--r--arch/arm/kernel/ecard.c7
-rw-r--r--arch/arm/kernel/fiq.c4
-rw-r--r--arch/arm/kernel/setup.c15
-rw-r--r--arch/arm/lib/csumpartialcopy.S6
-rw-r--r--arch/arm/lib/csumpartialcopygeneric.S6
-rw-r--r--arch/arm/lib/csumpartialcopyuser.S8
-rw-r--r--arch/arm/mach-aaec2000/clock.c15
-rw-r--r--arch/arm/mach-at91rm9200/Makefile8
-rw-r--r--arch/arm/mach-at91rm9200/board-csb337.c143
-rw-r--r--arch/arm/mach-at91rm9200/board-csb637.c116
-rw-r--r--arch/arm/mach-at91rm9200/board-dk.c138
-rw-r--r--arch/arm/mach-at91rm9200/board-ek.c131
-rw-r--r--arch/arm/mach-integrator/clock.c15
-rw-r--r--arch/arm/mach-pxa/ssp.c17
-rw-r--r--arch/arm/mach-realview/clock.c15
-rw-r--r--arch/arm/mach-s3c2410/clock.c11
-rw-r--r--arch/arm/mach-versatile/clock.c15
-rw-r--r--arch/arm/mm/consistent.c53
-rw-r--r--arch/arm/plat-omap/clock.c15
-rw-r--r--drivers/i2c/busses/i2c-pxa.c10
-rw-r--r--drivers/pcmcia/pxa2xx_mainstone.c15
-rw-r--r--drivers/pcmcia/pxa2xx_sharpsl.c19
-rw-r--r--drivers/serial/Kconfig34
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/at91_serial.c894
-rw-r--r--include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h36
-rw-r--r--include/asm-arm/arch-at91rm9200/at91rm9200_usart.h123
-rw-r--r--include/asm-arm/byteorder.h11
-rw-r--r--include/asm-arm/mach/serial_at91rm9200.h36
-rw-r--r--include/asm-arm/memory.h9
-rw-r--r--include/linux/serial_core.h3
37 files changed, 6114 insertions, 135 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 6abafb6f184..aaa47400eb9 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -84,7 +84,7 @@
kputc #'\n'
kphex r5, 8 /* decompressed kernel start */
kputc #'-'
- kphex r8, 8 /* decompressed kernel end */
+ kphex r9, 8 /* decompressed kernel end */
kputc #'>'
kphex r4, 8 /* kernel execution address */
kputc #'\n'
@@ -116,7 +116,7 @@ start:
.word start @ absolute load/run zImage address
.word _edata @ zImage end address
1: mov r7, r1 @ save architecture ID
- mov r8, #0 @ save r0
+ mov r8, r2 @ save atags pointer
#ifndef __ARM_ARCH_2__
/*
@@ -144,7 +144,7 @@ not_angel:
/*
* some architecture specific code can be inserted
- * by the linker here, but it should preserve r7 and r8.
+ * by the linker here, but it should preserve r7, r8, and r9.
*/
.text
@@ -249,16 +249,17 @@ not_relocated: mov r0, #0
* r5 = decompressed kernel start
* r6 = processor ID
* r7 = architecture ID
- * r8-r14 = unused
+ * r8 = atags pointer
+ * r9-r14 = corrupted
*/
add r1, r5, r0 @ end of decompressed kernel
adr r2, reloc_start
ldr r3, LC1
add r3, r2, r3
-1: ldmia r2!, {r8 - r13} @ copy relocation code
- stmia r1!, {r8 - r13}
- ldmia r2!, {r8 - r13}
- stmia r1!, {r8 - r13}
+1: ldmia r2!, {r9 - r14} @ copy relocation code
+ stmia r1!, {r9 - r14}
+ ldmia r2!, {r9 - r14}
+ stmia r1!, {r9 - r14}
cmp r2, r3
blo 1b
@@ -308,11 +309,12 @@ params: ldr r0, =params_phys
* r4 = kernel execution address
* r6 = processor ID
* r7 = architecture number
- * r8 = run-time address of "start"
+ * r8 = atags pointer
+ * r9 = run-time address of "start" (???)
* On exit,
- * r1, r2, r3, r8, r9, r12 corrupted
+ * r1, r2, r3, r9, r10, r12 corrupted
* This routine must preserve:
- * r4, r5, r6, r7
+ * r4, r5, r6, r7, r8
*/
.align 5
cache_on: mov r3, #8 @ cache_on function
@@ -326,15 +328,15 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size
* bits for the RAM area only.
*/
mov r0, r3
- mov r8, r0, lsr #18
- mov r8, r8, lsl #18 @ start of RAM
- add r9, r8, #0x10000000 @ a reasonable RAM size
+ mov r9, r0, lsr #18
+ mov r9, r9, lsl #18 @ start of RAM
+ add r10, r9, #0x10000000 @ a reasonable RAM size
mov r1, #0x12
orr r1, r1, #3 << 10
add r2, r3, #16384
1: cmp r1, r8 @ if virt > start of RAM
orrhs r1, r1, #0x0c @ set cacheable, bufferable
- cmp r1, r9 @ if virt > end of RAM
+ cmp r1, r10 @ if virt > end of RAM
bichs r1, r1, #0x0c @ clear cacheable, bufferable
str r1, [r0], #4 @ 1:1 mapping
add r1, r1, #1048576
@@ -403,26 +405,28 @@ __common_cache_on:
* r5 = decompressed kernel start
* r6 = processor ID
* r7 = architecture ID
- * r8-r14 = unused
+ * r8 = atags pointer
+ * r9-r14 = corrupted
*/
.align 5
-reloc_start: add r8, r5, r0
+reloc_start: add r9, r5, r0
debug_reloc_start
mov r1, r4
1:
.rept 4
- ldmia r5!, {r0, r2, r3, r9 - r13} @ relocate kernel
- stmia r1!, {r0, r2, r3, r9 - r13}
+ ldmia r5!, {r0, r2, r3, r10 - r14} @ relocate kernel
+ stmia r1!, {r0, r2, r3, r10 - r14}
.endr
- cmp r5, r8
+ cmp r5, r9
blo 1b
debug_reloc_end
call_kernel: bl cache_clean_flush
bl cache_off
- mov r0, #0
+ mov r0, #0 @ must be zero
mov r1, r7 @ restore architecture number
+ mov r2, r8 @ restore atags pointer
mov pc, r4 @ call kernel
/*
diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c
index ffb82d5bede..48b1e19b131 100644
--- a/arch/arm/common/rtctime.c
+++ b/arch/arm/common/rtctime.c
@@ -19,6 +19,7 @@
#include <linux/spinlock.h>
#include <linux/capability.h>
#include <linux/device.h>
+#include <linux/mutex.h>
#include <asm/rtc.h>
#include <asm/semaphore.h>
@@ -35,7 +36,7 @@ static unsigned long rtc_irq_data;
/*
* rtc_sem protects rtc_inuse and rtc_ops
*/
-static DECLARE_MUTEX(rtc_sem);
+static DEFINE_MUTEX(rtc_mutex);
static unsigned long rtc_inuse;
static struct rtc_ops *rtc_ops;
@@ -356,7 +357,7 @@ static int rtc_open(struct inode *inode, struct file *file)
{
int ret;
- down(&rtc_sem);
+ mutex_lock(&rtc_mutex);
if (rtc_inuse) {
ret = -EBUSY;
@@ -374,7 +375,7 @@ static int rtc_open(struct inode *inode, struct file *file)
rtc_inuse = 1;
}
}
- up(&rtc_sem);
+ mutex_unlock(&rtc_mutex);
return ret;
}
@@ -480,7 +481,7 @@ int register_rtc(struct rtc_ops *ops)
{
int ret = -EBUSY;
- down(&rtc_sem);
+ mutex_lock(&rtc_mutex);
if (rtc_ops == NULL) {
rtc_ops = ops;
@@ -489,7 +490,7 @@ int register_rtc(struct rtc_ops *ops)
create_proc_read_entry("driver/rtc", 0, NULL,
rtc_read_proc, ops);
}
- up(&rtc_sem);
+ mutex_unlock(&rtc_mutex);
return ret;
}
@@ -497,12 +498,12 @@ EXPORT_SYMBOL(register_rtc);
void unregister_rtc(struct rtc_ops *rtc)
{
- down(&rtc_sem);
+ mutex_lock(&rtc_mutex);
if (rtc == rtc_ops) {
remove_proc_entry("driver/rtc", NULL);
misc_deregister(&rtc_miscdev);
rtc_ops = NULL;
}
- up(&rtc_sem);
+ mutex_unlock(&rtc_mutex);
}
EXPORT_SYMBOL(unregister_rtc);
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
new file mode 100644
index 00000000000..5cdd13acf8f
--- /dev/null
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -0,0 +1,1009 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15
+# Mon Jan 9 20:54:30 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91RM9200=y
+
+#
+# AT91RM9200 Implementations
+#
+
+#
+# AT91RM9200 Board Type
+#
+CONFIG_ARCH_AT91RM9200DK=y
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_ATEB9200 is not set
+
+#
+# AT91RM9200 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_AT91_CF=y
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x10000000
+CONFIG_MTD_PHYSMAP_LEN=0x200000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_AT91_DATAFLASH=y
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AT91=y
+CONFIG_SERIAL_AT91_CONSOLE=y
+# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+CONFIG_AT91_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+CONFIG_AT91_SPI=y
+CONFIG_AT91_SPIDEV=y
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_WBSD is not set
+CONFIG_MMC_AT91RM9200=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
new file mode 100644
index 00000000000..20838ccf1da
--- /dev/null
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -0,0 +1,998 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15
+# Mon Jan 9 20:57:31 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91RM9200=y
+
+#
+# AT91RM9200 Implementations
+#
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_ARCH_AT91RM9200DK is not set
+CONFIG_MACH_AT91RM9200EK=y
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_ATEB9200 is not set
+
+#
+# AT91RM9200 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x10000000
+CONFIG_MTD_PHYSMAP_LEN=0x800000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_AT91_DATAFLASH=y
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AT91=y
+CONFIG_SERIAL_AT91_CONSOLE=y
+# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+CONFIG_AT91_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+CONFIG_AT91_SPI=y
+CONFIG_AT91_SPIDEV=y
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_S1D13XXX=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_WBSD is not set
+CONFIG_MMC_AT91RM9200=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
new file mode 100644
index 00000000000..885a3184830
--- /dev/null
+++ b/arch/arm/configs/csb337_defconfig
@@ -0,0 +1,1136 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15
+# Mon Jan 9 21:51:31 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91RM9200=y
+
+#
+# AT91RM9200 Implementations
+#
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+CONFIG_MACH_CSB337=y
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_ATEB9200 is not set
+
+#
+# AT91RM9200 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_AT91_CF=y
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+CONFIG_MTD_CSB337=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_AT91_DATAFLASH is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AT91=y
+CONFIG_SERIAL_AT91_CONSOLE=y
+# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_RTC=y
+# CONFIG_AT91_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+CONFIG_AT91_SPI=y
+CONFIG_AT91_SPIDEV=y
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=y
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+CONFIG_USB_SERIAL_MCT_U232=y
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_WBSD is not set
+CONFIG_MMC_AT91RM9200=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
new file mode 100644
index 00000000000..95a96a5462a
--- /dev/null
+++ b/arch/arm/configs/csb637_defconfig
@@ -0,0 +1,1116 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15
+# Mon Jan 9 21:52:00 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91RM9200=y
+
+#
+# AT91RM9200 Implementations
+#
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+CONFIG_MACH_CSB637=y
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_ATEB9200 is not set
+
+#
+# AT91RM9200 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_AT91_CF=y
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+CONFIG_MTD_CSB637=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_AT91_DATAFLASH is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AT91=y
+CONFIG_SERIAL_AT91_CONSOLE=y
+# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_RTC=y
+# CONFIG_AT91_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+CONFIG_AT91_SPI=y
+CONFIG_AT91_SPIDEV=y
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=y
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+CONFIG_USB_SERIAL_MCT_U232=y
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index dceb826bd21..96fd91926c9 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -40,6 +40,7 @@
#include <linux/proc_fs.h>
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/mutex.h>
#include <asm/dma.h>
#include <asm/ecard.h>
@@ -206,7 +207,7 @@ static void ecard_task_readbytes(struct ecard_request *req)
static DECLARE_WAIT_QUEUE_HEAD(ecard_wait);
static struct ecard_request *ecard_req;
-static DECLARE_MUTEX(ecard_sem);
+static DEFINE_MUTEX(ecard_mutex);
/*
* Set up the expansion card daemon's page tables.
@@ -299,7 +300,7 @@ static void ecard_call(struct ecard_request *req)
req->complete = &completion;
- down(&ecard_sem);
+ mutex_lock(&ecard_mutex);
ecard_req = req;
wake_up(&ecard_wait);
@@ -307,7 +308,7 @@ static void ecard_call(struct ecard_request *req)
* Now wait for kecardd to run.
*/
wait_for_completion(&completion);
- up(&ecard_sem);
+ mutex_unlock(&ecard_mutex);
}
/* ======================= Mid-level card control ===================== */
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 9299dfc2569..1ec3f7faa25 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -101,7 +101,7 @@ void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
ldmia %1, {r8 - r14}\n\
msr cpsr_c, %0 @ return to SVC mode\n\
mov r0, r0\n\
- ldmea fp, {fp, sp, pc}"
+ ldmfd sp, {fp, sp, pc}"
: "=&r" (tmp)
: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
}
@@ -119,7 +119,7 @@ void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs)
stmia %1, {r8 - r14}\n\
msr cpsr_c, %0 @ return to SVC mode\n\
mov r0, r0\n\
- ldmea fp, {fp, sp, pc}"
+ ldmfd sp, {fp, sp, pc}"
: "=&r" (tmp)
: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
}
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 2cab741ad0f..c45d10d07bd 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -205,7 +205,7 @@ static const char *proc_arch[] = {
"5TE",
"5TEJ",
"6TEJ",
- "?(10)",
+ "7",
"?(11)",
"?(12)",
"?(13)",
@@ -258,14 +258,17 @@ int cpu_architecture(void)
{
int cpu_arch;
- if ((processor_id & 0x0000f000) == 0) {
+ if ((processor_id & 0x0008f000) == 0) {
cpu_arch = CPU_ARCH_UNKNOWN;
- } else if ((processor_id & 0x0000f000) == 0x00007000) {
+ } else if ((processor_id & 0x0008f000) == 0x00007000) {
cpu_arch = (processor_id & (1 << 23)) ? CPU_ARCH_ARMv4T : CPU_ARCH_ARMv3;
- } else {
+ } else if ((processor_id & 0x00080000) == 0x00000000) {
cpu_arch = (processor_id >> 16) & 7;
if (cpu_arch)
cpu_arch += CPU_ARCH_ARMv3;
+ } else {
+ /* the revised CPUID */
+ cpu_arch = ((processor_id >> 12) & 0xf) - 0xb + CPU_ARCH_ARMv6;
}
return cpu_arch;
@@ -863,11 +866,11 @@ static int c_show(struct seq_file *m, void *v)
seq_printf(m, "\nCPU implementer\t: 0x%02x\n", processor_id >> 24);
seq_printf(m, "CPU architecture: %s\n", proc_arch[cpu_architecture()]);
- if ((processor_id & 0x0000f000) == 0x00000000) {
+ if ((processor_id & 0x0008f000) == 0x00000000) {
/* pre-ARM7 */
seq_printf(m, "CPU part\t\t: %07x\n", processor_id >> 4);
} else {
- if ((processor_id & 0x0000f000) == 0x00007000) {
+ if ((processor_id & 0x0008f000) == 0x00007000) {
/* ARM7 */
seq_printf(m, "CPU variant\t: 0x%02x\n",
(processor_id >> 16) & 127);
diff --git a/arch/arm/lib/csumpartialcopy.S b/arch/arm/lib/csumpartialcopy.S
index 990ee63b246..21effe0dbf9 100644
--- a/arch/arm/lib/csumpartialcopy.S
+++ b/arch/arm/lib/csumpartialcopy.S
@@ -18,11 +18,13 @@
*/
.macro save_regs
+ mov ip, sp
stmfd sp!, {r1, r4 - r8, fp, ip, lr, pc}
+ sub fp, ip, #4
.endm
- .macro load_regs,flags
- LOADREGS(\flags,fp,{r1, r4 - r8, fp, sp, pc})
+ .macro load_regs
+ ldmfd sp, {r1, r4 - r8, fp, sp, pc}
.endm
.macro load1b, reg1
diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S
index 4a4609c1909..c50e8f5285d 100644
--- a/arch/arm/lib/csumpartialcopygeneric.S
+++ b/arch/arm/lib/csumpartialcopygeneric.S
@@ -23,7 +23,7 @@ len .req r2
sum .req r3
.Lzero: mov r0, sum
- load_regs ea
+ load_regs
/*
* Align an unaligned destination pointer. We know that
@@ -87,9 +87,7 @@ sum .req r3
b .Ldone
FN_ENTRY
- mov ip, sp
save_regs
- sub fp, ip, #4
cmp len, #8 @ Ensure that we have at least
blo .Lless8 @ 8 bytes to copy.
@@ -163,7 +161,7 @@ FN_ENTRY
ldr sum, [sp, #0] @ dst
tst sum, #1
movne r0, r0, ror #8
- load_regs ea
+ load_regs
.Lsrc_not_aligned:
adc sum, sum, #0 @ include C from dst alignment
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 333bca292de..c3b93e22ea2 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -18,11 +18,13 @@
.text
.macro save_regs
+ mov ip, sp
stmfd sp!, {r1 - r2, r4 - r8, fp, ip, lr, pc}
+ sub fp, ip, #4
.endm
- .macro load_regs,flags
- ldm\flags fp, {r1, r2, r4-r8, fp, sp, pc}
+ .macro load_regs
+ ldmfd sp, {r1, r2, r4-r8, fp, sp, pc}
.endm
.macro load1b, reg1
@@ -100,5 +102,5 @@
6002: teq r2, r1
strneb r0, [r1], #1
bne 6002b
- load_regs ea
+ load_regs
.previous
diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c
index 1c84c60941e..74aa7a39bb6 100644
--- a/arch/arm/mach-aaec2000/clock.c
+++ b/arch/arm/mach-aaec2000/clock.c
@@ -16,26 +16,27 @@
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
+#include <linux/mutex.h>
#include <asm/semaphore.h>
#include "clock.h"
static LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
+static DEFINE_MUTEX(clocks_mutex);
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return clk;
}
@@ -78,18 +79,18 @@ EXPORT_SYMBOL(clk_set_rate);
int clk_register(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_add(&clk->node, &clocks);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return 0;
}
EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_del(&clk->node);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_unregister);
diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile
index 1f2805ca6e2..75e6ee318de 100644
--- a/arch/arm/mach-at91rm9200/Makefile
+++ b/arch/arm/mach-at91rm9200/Makefile
@@ -8,10 +8,10 @@ obj-n :=
obj- :=
# Board-specific support
-#obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
-#obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
-#obj-$(CONFIG_MACH_CSB337) += board-csb337.o
-#obj-$(CONFIG_MACH_CSB637) += board-csb637.o
+obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
+obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
+obj-$(CONFIG_MACH_CSB337) += board-csb337.o
+obj-$(CONFIG_MACH_CSB637) += board-csb637.o
#obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
#obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c
new file mode 100644
index 00000000000..4aec834ee47
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/board-csb337.c
@@ -0,0 +1,143 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-csb337.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/mach/serial_at91rm9200.h>
+#include <asm/arch/board.h>
+
+#include "generic.h"
+
+static void __init csb337_init_irq(void)
+{
+ /* Initialize AIC controller */
+ at91rm9200_init_irq(NULL);
+
+ /* Set up the GPIO interrupts */
+ at91_gpio_irq_setup(BGA_GPIO_BANKS);
+}
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+#define CSB337_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+#define CSB337_SERIAL_CONSOLE 0 /* ttyS0 */
+
+static void __init csb337_map_io(void)
+{
+ int serial[AT91_NR_UART] = CSB337_UART_MAP;
+ int i;
+
+ at91rm9200_map_io();
+
+ /* Initialize clocks: 3.6864 MHz crystal */
+ at91_clock_init(3686400);
+
+#ifdef CONFIG_SERIAL_AT91
+ at91_console_port = CSB337_SERIAL_CONSOLE;
+ memcpy(at91_serial_map, serial, sizeof(serial));
+
+ /* Register UARTs */
+ for (i = 0; i < AT91_NR_UART; i++) {
+ if (serial[i] >= 0)
+ at91_register_uart(i, serial[i]);
+ }
+#endif
+}
+
+static struct at91_eth_data __initdata csb337_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC2,
+ .is_rmii = 0,
+};
+
+static struct at91_usbh_data __initdata csb337_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata csb337_udc_data = {
+ // this has no VBUS sensing pin
+ .pullup_pin = AT91_PIN_PA24,
+};
+
+static struct at91_cf_data __initdata csb337_cf_data = {
+ /*
+ * connector P4 on the CSB 337 mates to
+ * connector P8 on the CSB 300CF
+ */
+
+ /* CSB337 specific */
+ .det_pin = AT91_PIN_PC3,
+
+ /* CSB300CF specific */
+ .irq_pin = AT91_PIN_PA19,
+ .vcc_pin = AT91_PIN_PD0,
+ .rst_pin = AT91_PIN_PD2,
+};
+
+static struct at91_mmc_data __initdata csb337_mmc_data = {
+ .det_pin = AT91_PIN_PD5,
+ .is_b = 0,
+ .wire4 = 1,
+ .wp_pin = AT91_PIN_PD6,
+};
+
+static void __init csb337_board_init(void)
+{
+ /* Ethernet */
+ at91_add_device_eth(&csb337_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&csb337_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&csb337_udc_data);
+ /* Compact Flash */
+ at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
+ at91_add_device_cf(&csb337_cf_data);
+ /* MMC */
+ at91_add_device_mmc(&csb337_mmc_data);
+}
+
+MACHINE_START(CSB337, "Cogent CSB337")
+ /* Maintainer: Bill Gatliff */
+ .phys_ram = AT91_SDRAM_BASE,
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = csb337_map_io,
+ .init_irq = csb337_init_irq,
+ .init_machine = csb337_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c
new file mode 100644
index 00000000000..23e4cc21481
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/board-csb637.c
@@ -0,0 +1,116 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-csb637.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/mach/serial_at91rm9200.h>
+#include <asm/arch/board.h>
+
+#include "generic.h"
+
+static void __init csb637_init_irq(void)
+{
+ /* Initialize AIC controller */
+ at91rm9200_init_irq(NULL);
+
+ /* Set up the GPIO interrupts */
+ at91_gpio_irq_setup(BGA_GPIO_BANKS);
+}
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+#define CSB637_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+#define CSB637_SERIAL_CONSOLE 0 /* ttyS0 */
+
+static void __init csb637_map_io(void)
+{
+ int serial[AT91_NR_UART] = CSB637_UART_MAP;
+ int i;
+
+ at91rm9200_map_io();
+
+ /* Initialize clocks: 3.6864 MHz crystal */
+ at91_clock_init(3686400);
+
+#ifdef CONFIG_SERIAL_AT91
+ at91_console_port = CSB637_SERIAL_CONSOLE;
+ memcpy(at91_serial_map, serial, sizeof(serial));
+
+ /* Register UARTs */
+ for (i = 0; i < AT91_NR_UART; i++) {
+ if (serial[i] >= 0)
+ at91_register_uart(i, serial[i]);
+ }
+#endif
+}
+
+static struct at91_eth_data __initdata csb637_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC0,
+ .is_rmii = 0,
+};
+
+static struct at91_usbh_data __initdata csb637_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata csb637_udc_data = {
+ .vbus_pin = AT91_PIN_PB28,
+ .pullup_pin = AT91_PIN_PB1,
+};
+
+static void __init csb637_board_init(void)
+{
+ /* Ethernet */
+ at91_add_device_eth(&csb637_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&csb637_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&csb637_udc_data);
+}
+
+MACHINE_START(CSB637, "Cogent CSB637")
+ /* Maintainer: Bill Gatliff */
+ .phys_ram = AT91_SDRAM_BASE,
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = csb637_map_io,
+ .init_irq = csb637_init_irq,
+ .init_machine = csb637_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c
new file mode 100644
index 00000000000..8c747a31b95
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/board-dk.c
@@ -0,0 +1,138 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-dk.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * Epson S1D framebuffer glue code is:
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/mach/serial_at91rm9200.h>
+#include <asm/arch/board.h>
+
+#include "generic.h"
+
+static void __init dk_init_irq(void)
+{
+ /* Initialize AIC controller */
+ at91rm9200_init_irq(NULL);
+
+ /* Set up the GPIO interrupts */
+ at91_gpio_irq_setup(BGA_GPIO_BANKS);
+}
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+#define DK_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+#define DK_SERIAL_CONSOLE 0 /* ttyS0 */
+
+static void __init dk_map_io(void)
+{
+ int serial[AT91_NR_UART] = DK_UART_MAP;
+ int i;
+
+ at91rm9200_map_io();
+
+ /* Initialize clocks: 18.432 MHz crystal */
+ at91_clock_init(18432000);
+
+#ifdef CONFIG_SERIAL_AT91
+ at91_console_port = DK_SERIAL_CONSOLE;
+ memcpy(at91_serial_map, serial, sizeof(serial));
+
+ /* Register UARTs */
+ for (i = 0; i < AT91_NR_UART; i++) {
+ if (at91_serial_map[i] >= 0)
+ at91_register_uart(i, at91_serial_map[i]);
+ }
+#endif
+}
+
+static struct at91_eth_data __initdata dk_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata dk_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata dk_udc_data = {
+ .vbus_pin = AT91_PIN_PD4,
+ .pullup_pin = AT91_PIN_PD5,
+};
+
+static struct at91_cf_data __initdata dk_cf_data = {
+ .det_pin = AT91_PIN_PB0,
+ .rst_pin = AT91_PIN_PC5,
+ // .irq_pin = ... not connected
+ // .vcc_pin = ... always powered
+};
+
+static struct at91_mmc_data __initdata dk_mmc_data = {
+ .is_b = 0,
+ .wire4 = 1,
+};
+
+static void __init dk_board_init(void)
+{
+ /* Ethernet */
+ at91_add_device_eth(&dk_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&dk_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&dk_udc_data);
+ /* Compact Flash */
+ at91_add_device_cf(&dk_cf_data);
+ /* MMC */
+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */
+ at91_add_device_mmc(&dk_mmc_data);
+ /* VGA */
+// dk_add_device_video();
+}
+
+MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
+ /* Maintainer: SAN People/Atmel */
+ .phys_ram = AT91_SDRAM_BASE,
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = dk_map_io,
+ .init_irq = dk_init_irq,
+ .init_machine = dk_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c
new file mode 100644
index 00000000000..d140645711b
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/board-ek.c
@@ -0,0 +1,131 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-ek.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * Epson S1D framebuffer glue code is:
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/mach/serial_at91rm9200.h>
+#include <asm/arch/board.h>
+
+#include "generic.h"
+
+static void __init ek_init_irq(void)
+{
+ /* Initialize AIC controller */
+ at91rm9200_init_irq(NULL);
+
+ /* Set up the GPIO interrupts */
+ at91_gpio_irq_setup(BGA_GPIO_BANKS);
+}
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+#define EK_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+#define EK_SERIAL_CONSOLE 0 /* ttyS0 */
+
+static void __init ek_map_io(void)
+{
+ int serial[AT91_NR_UART] = EK_UART_MAP;
+ int i;
+
+ at91rm9200_map_io();
+
+ /* Initialize clocks: 18.432 MHz crystal */
+ at91_clock_init(18432000);
+
+#ifdef CONFIG_SERIAL_AT91
+ at91_console_port = EK_SERIAL_CONSOLE;
+ memcpy(at91_serial_map, serial, sizeof(serial));
+
+ /* Register UARTs */
+ for (i = 0; i < AT91_NR_UART; i++) {
+ if (serial[i] >= 0)
+ at91_register_uart(i, serial[i]);
+ }
+#endif
+}
+
+static struct at91_eth_data __initdata ek_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PD4,
+ .pullup_pin = AT91_PIN_PD5,
+};
+
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .det_pin = AT91_PIN_PB27,
+ .is_b = 0,
+ .wire4 = 1,
+ .wp_pin = AT91_PIN_PA17,
+};
+
+static void __init ek_board_init(void)
+{
+ /* Ethernet */
+ at91_add_device_eth(&ek_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ /* MMC */
+ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */
+ at91_add_device_mmc(&ek_mmc_data);
+ /* VGA */
+// ek_add_device_video();
+}
+
+MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
+ /* Maintainer: SAN People/Atmel */
+ .phys_ram = AT91_SDRAM_BASE,
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/mach-integrator/clock.c
index 40684e01e86..95a1e263f7f 100644
--- a/arch/arm/mach-integrator/clock.c
+++ b/arch/arm/mach-integrator/clock.c
@@ -15,6 +15,7 @@
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
+#include <linux/mutex.h>
#include <asm/semaphore.h>
#include <asm/hardware/icst525.h>
@@ -22,20 +23,20 @@
#include "clock.h"
static LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
+static DEFINE_MUTEX(clocks_mutex);
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return clk;
}
@@ -107,18 +108,18 @@ static struct clk uart_clk = {
int clk_register(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_add(&clk->node, &clocks);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return 0;
}
EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_del(&clk->node);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_unregister);
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index a68b30eff4d..93096befd01 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -31,6 +31,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/init.h>
+#include <linux/mutex.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware.h>
@@ -59,7 +60,7 @@ static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = {
#endif
};
-static DECLARE_MUTEX(sem);
+static DEFINE_MUTEX(mutex);
static int use_count[PXA_SSP_PORTS] = {0, 0, 0};
static irqreturn_t ssp_interrupt(int irq, void *dev_id, struct pt_regs *regs)
@@ -239,16 +240,16 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
if (port > PXA_SSP_PORTS || port == 0)
return -ENODEV;
- down(&sem);
+ mutex_lock(&mutex);
if (use_count[port - 1]) {
- up(&sem);
+ mutex_unlock(&mutex);
return -EBUSY;
}
use_count[port - 1]++;
if (!request_mem_region(__PREG(SSCR0_P(port)), 0x2c, "SSP")) {
use_count[port - 1]--;
- up(&sem);
+ mutex_unlock(&mutex);
return -EBUSY;
}
dev->port = port;
@@ -265,13 +266,13 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
/* turn on SSP port clock */
pxa_set_cken(ssp_info[port-1].clock, 1);
- up(&sem);
+ mutex_unlock(&mutex);
return 0;
out_region:
release_mem_region(__PREG(SSCR0_P(port)), 0x2c);
use_count[port - 1]--;
- up(&sem);
+ mutex_unlock(&mutex);
return ret;
}
@@ -282,7 +283,7 @@ out_region:
*/
void ssp_exit(struct ssp_dev *dev)
{
- down(&sem);
+ mutex_lock(&mutex);
SSCR0_P(dev->port) &= ~SSCR0_SSE;
if (dev->port > PXA_SSP_PORTS || dev->port == 0) {
@@ -295,7 +296,7 @@ void ssp_exit(struct ssp_dev *dev)
free_irq(dev->irq, dev);
release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c);
use_count[dev->port - 1]--;
- up(&sem);
+ mutex_unlock(&mutex);
}
EXPORT_SYMBOL(ssp_write_word);
diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c
index ec3f7e79862..21325a4da9d 100644
--- a/arch/arm/mach-realview/clock.c
+++ b/arch/arm/mach-realview/clock.c
@@ -14,6 +14,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/mutex.h>
#include <asm/semaphore.h>
#include <asm/hardware/icst307.h>
@@ -21,20 +22,20 @@
#include "clock.h"
static LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
+static DEFINE_MUTEX(clocks_mutex);
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return clk;
}
@@ -109,18 +110,18 @@ static struct clk mmci_clk = {
int clk_register(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_add(&clk->node, &clocks);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return 0;
}
EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_del(&clk->node);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_unregister);
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index fc09ba92d66..af2f3d52b61 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -37,6 +37,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/clk.h>
+#include <linux/mutex.h>
#include <asm/hardware.h>
#include <asm/atomic.h>
@@ -51,7 +52,7 @@
/* clock information */
static LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
+static DEFINE_MUTEX(clocks_mutex);
/* old functions */
@@ -102,7 +103,7 @@ struct clk *clk_get(struct device *dev, const char *id)
else
idno = to_platform_device(dev)->id;
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, list) {
if (p->id == idno &&
@@ -126,7 +127,7 @@ struct clk *clk_get(struct device *dev, const char *id)
}
}
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return clk;
}
@@ -362,9 +363,9 @@ int s3c24xx_register_clock(struct clk *clk)
/* add to the list of available clocks */
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_add(&clk->list, &clocks);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return 0;
}
diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c
index dcf10014f5c..9858c96560e 100644
--- a/arch/arm/mach-versatile/clock.c
+++ b/arch/arm/mach-versatile/clock.c
@@ -15,6 +15,7 @@
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
+#include <linux/mutex.h>
#include <asm/semaphore.h>
#include <asm/hardware/icst307.h>
@@ -22,20 +23,20 @@
#include "clock.h"
static LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
+static DEFINE_MUTEX(clocks_mutex);
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return clk;
}
@@ -110,18 +111,18 @@ static struct clk mmci_clk = {
int clk_register(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_add(&clk->node, &clocks);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return 0;
}
EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_del(&clk->node);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_unregister);
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 0513ed1b2fc..c2ee18d2075 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -20,15 +20,25 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
+#include <asm/sizes.h>
+
+/* Sanity check size */
+#if (CONSISTENT_DMA_SIZE % SZ_2M)
+#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
+#endif
-#define CONSISTENT_BASE (0xffc00000)
#define CONSISTENT_END (0xffe00000)
+#define CONSISTENT_BASE (CONSISTENT_END - CONSISTENT_DMA_SIZE)
+
#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
+#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+
/*
- * This is the page table (2MB) covering uncached, DMA consistent allocations
+ * These are the page tables (2MB each) covering uncached, DMA consistent allocations
*/
-static pte_t *consistent_pte;
+static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
static DEFINE_SPINLOCK(consistent_lock);
/*
@@ -142,7 +152,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
unsigned long order;
u64 mask = ISA_DMA_THRESHOLD, limit;
- if (!consistent_pte) {
+ if (!consistent_pte[0]) {
printk(KERN_ERR "%s: not initialised\n", __func__);
dump_stack();
return NULL;
@@ -205,9 +215,12 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
c = vm_region_alloc(&consistent_head, size,
gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
if (c) {
- pte_t *pte = consistent_pte + CONSISTENT_OFFSET(c->vm_start);
+ pte_t *pte;
struct page *end = page + (1 << order);
+ int idx = CONSISTENT_PTE_INDEX(c->vm_start);
+ u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+ pte = consistent_pte[idx] + off;
c->vm_pages = page;
/*
@@ -226,6 +239,11 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
set_pte(pte, mk_pte(page, prot));
page++;
pte++;
+ off++;
+ if (off >= PTRS_PER_PTE) {
+ off = 0;
+ pte = consistent_pte[++idx];
+ }
} while (size -= PAGE_SIZE);
/*
@@ -327,6 +345,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
struct vm_region *c;
unsigned long flags, addr;
pte_t *ptep;
+ int idx;
+ u32 off;
WARN_ON(irqs_disabled());
@@ -347,7 +367,9 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
size = c->vm_end - c->vm_start;
}
- ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start);
+ idx = CONSISTENT_PTE_INDEX(c->vm_start);
+ off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+ ptep = consistent_pte[idx] + off;
addr = c->vm_start;
do {
pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
@@ -355,6 +377,11 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
ptep++;
addr += PAGE_SIZE;
+ off++;
+ if (off >= PTRS_PER_PTE) {
+ off = 0;
+ ptep = consistent_pte[++idx];
+ }
if (!pte_none(pte) && pte_present(pte)) {
pfn = pte_pfn(pte);
@@ -401,11 +428,12 @@ static int __init consistent_init(void)
pgd_t *pgd;
pmd_t *pmd;
pte_t *pte;
- int ret = 0;
+ int ret = 0, i = 0;
+ u32 base = CONSISTENT_BASE;
do {
- pgd = pgd_offset(&init_mm, CONSISTENT_BASE);
- pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE);
+ pgd = pgd_offset(&init_mm, base);
+ pmd = pmd_alloc(&init_mm, pgd, base);
if (!pmd) {
printk(KERN_ERR "%s: no pmd tables\n", __func__);
ret = -ENOMEM;
@@ -413,15 +441,16 @@ static int __init consistent_init(void)
}
WARN_ON(!pmd_none(*pmd));
- pte = pte_alloc_kernel(pmd, CONSISTENT_BASE);
+ pte = pte_alloc_kernel(pmd, base);
if (!pte) {
printk(KERN_ERR "%s: no pte tables\n", __func__);
ret = -ENOMEM;
break;
}
- consistent_pte = pte;
- } while (0);
+ consistent_pte[i++] = pte;
+ base += (1 << PGDIR_SHIFT);
+ } while (base < CONSISTENT_END);
return ret;
}
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 84fd65656fc..7ebc5a29db8 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -20,6 +20,7 @@
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
+#include <linux/mutex.h>
#include <asm/io.h>
#include <asm/semaphore.h>
@@ -27,7 +28,7 @@
#include <asm/arch/clock.h>
LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
+static DEFINE_MUTEX(clocks_mutex);
DEFINE_SPINLOCK(clockfw_lock);
static struct clk_functions *arch_clock;
@@ -40,14 +41,14 @@ struct clk * clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return clk;
}
@@ -249,11 +250,11 @@ void propagate_rate(struct clk * tclk)
int clk_register(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_add(&clk->node, &clocks);
if (clk->init)
clk->init(clk);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return 0;
}
@@ -261,9 +262,9 @@ EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_del(&clk->node);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_unregister);
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 70f7ab829d3..86e2234faf8 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -899,6 +899,12 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num
struct pxa_i2c *i2c = adap->algo_data;
int ret, i;
+ /* If the I2C controller is disabled we need to reset it (probably due
+ to a suspend/resume destroying state). We do this here as we can then
+ avoid worrying about resuming the controller before its users. */
+ if (!(ICR & ICR_IUE))
+ i2c_pxa_reset(i2c);
+
for (i = adap->retries; i >= 0; i--) {
ret = i2c_pxa_do_xfer(i2c, msgs, num);
if (ret != I2C_RETRY)
@@ -939,7 +945,9 @@ static struct pxa_i2c i2c_pxa = {
static int i2c_pxa_probe(struct platform_device *dev)
{
struct pxa_i2c *i2c = &i2c_pxa;
+#ifdef CONFIG_I2C_PXA_SLAVE
struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+#endif
int ret;
#ifdef CONFIG_PXA27x
@@ -1024,5 +1032,7 @@ static void i2c_adap_pxa_exit(void)
return platform_driver_unregister(&i2c_pxa_driver);
}
+MODULE_LICENSE("GPL");
+
module_init(i2c_adap_pxa_init);
module_exit(i2c_adap_pxa_exit);
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 5d957dfe23d..fda06941e73 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -171,27 +171,22 @@ static int __init mst_pcmcia_init(void)
{
int ret;
- mst_pcmcia_device = kzalloc(sizeof(*mst_pcmcia_device), GFP_KERNEL);
+ mst_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!mst_pcmcia_device)
return -ENOMEM;
- mst_pcmcia_device->name = "pxa2xx-pcmcia";
+
mst_pcmcia_device->dev.platform_data = &mst_pcmcia_ops;
- ret = platform_device_register(mst_pcmcia_device);
+ ret = platform_device_add(mst_pcmcia_device);
+
if (ret)
- kfree(mst_pcmcia_device);
+ platform_device_put(mst_pcmcia_device);
return ret;
}
static void __exit mst_pcmcia_exit(void)
{
- /*
- * This call is supposed to free our mst_pcmcia_device.
- * Unfortunately platform_device don't have a free method, and
- * we can't assume it's free of any reference at this point so we
- * can't free it either.
- */
platform_device_unregister(mst_pcmcia_device);
}
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index 12a7244a5ec..fd364736895 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -263,30 +263,25 @@ static int __init sharpsl_pcmcia_init(void)
{
int ret;
- sharpsl_pcmcia_ops.nr=platform_scoop_config->num_devs;
- sharpsl_pcmcia_device = kzalloc(sizeof(*sharpsl_pcmcia_device), GFP_KERNEL);
+ sharpsl_pcmcia_ops.nr = platform_scoop_config->num_devs;
+ sharpsl_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+
if (!sharpsl_pcmcia_device)
return -ENOMEM;
- sharpsl_pcmcia_device->name = "pxa2xx-pcmcia";
sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops;
- sharpsl_pcmcia_device->dev.parent=platform_scoop_config->devs[0].dev;
+ sharpsl_pcmcia_device->dev.parent = platform_scoop_config->devs[0].dev;
+
+ ret = platform_device_add(sharpsl_pcmcia_device);
- ret = platform_device_register(sharpsl_pcmcia_device);
if (ret)
- kfree(sharpsl_pcmcia_device);
+ platform_device_put(sharpsl_pcmcia_device);
return ret;
}
static void __exit sharpsl_pcmcia_exit(void)
{
- /*
- * This call is supposed to free our sharpsl_pcmcia_device.
- * Unfortunately platform_device don't have a free method, and
- * we can't assume it's free of any reference at this point so we
- * can't free it either.
- */
platform_device_unregister(sharpsl_pcmcia_device);
}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 698cb76819d..843717275d4 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -280,6 +280,40 @@ config SERIAL_AMBA_PL011_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
+config SERIAL_AT91
+ bool "AT91RM9200 serial port support"
+ depends on ARM && ARCH_AT91RM9200
+ select SERIAL_CORE
+ help
+ This enables the driver for the on-chip UARTs of the AT91RM9200
+ processor.
+
+config SERIAL_AT91_CONSOLE
+ bool "Support for console on AT91RM9200 serial port"
+ depends on SERIAL_AT91=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use a UART on the AT91RM9200 as the system
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
+config SERIAL_AT91_TTYAT
+ bool "Install as device ttyAT0-4 instead of ttyS0-4"
+ depends on SERIAL_AT91=y
+ help
+ Say Y here if you wish to have the five internal AT91RM9200 UARTs
+ appear as /dev/ttyAT0-4 (major 240, minor 0-4) instead of the
+ normal /dev/ttyS0-4 (major 4, minor 64-68). This is necessary if
+ you also want other UARTs, such as external 8250/16C550 compatible
+ UARTs.
+ The ttySn nodes are legally reserved for the 8250 serial driver
+ but are often misused by other serial drivers.
+
+ To use this, you should create suitable ttyATn device nodes in
+ /dev/, and pass "console=ttyATn" to the kernel.
+
+ Say Y if you have an external 8250/16C550 UART. If unsure, say N.
+
config SERIAL_CLPS711X
tristate "CLPS711X serial port support"
depends on ARM && ARCH_CLPS711X
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 137148bba4f..24a583e482b 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -56,3 +56,4 @@ obj-$(CONFIG_SERIAL_JSM) += jsm/
obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
+obj-$(CONFIG_SERIAL_AT91) += at91_serial.o
diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c
new file mode 100644
index 00000000000..0e206063d68
--- /dev/null
+++ b/drivers/serial/at91_serial.c
@@ -0,0 +1,894 @@
+/*
+ * linux/drivers/char/at91_serial.c
+ *
+ * Driver for Atmel AT91RM9200 Serial ports
+ *
+ * Copyright (C) 2003 Rick Bronson
+ *
+ * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/tty_flip.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/at91rm9200_usart.h>
+#include <asm/mach/serial_at91rm9200.h>
+#include <asm/arch/board.h>
+#include <asm/arch/pio.h>
+
+
+#if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#ifdef CONFIG_SERIAL_AT91_TTYAT
+
+/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we
+ * should coexist with the 8250 driver, such as if we have an external 16C550
+ * UART. */
+#define SERIAL_AT91_MAJOR 204
+#define MINOR_START 154
+#define AT91_DEVICENAME "ttyAT"
+
+#else
+
+/* Use device name ttyS, major 4, minor 64-68. This is the usual serial port
+ * name, but it is legally reserved for the 8250 driver. */
+#define SERIAL_AT91_MAJOR TTY_MAJOR
+#define MINOR_START 64
+#define AT91_DEVICENAME "ttyS"
+
+#endif
+
+#define AT91_VA_BASE_DBGU ((unsigned long) AT91_VA_BASE_SYS + AT91_DBGU)
+#define AT91_ISR_PASS_LIMIT 256
+
+#define UART_PUT_CR(port,v) writel(v, (port)->membase + AT91_US_CR)
+#define UART_GET_MR(port) readl((port)->membase + AT91_US_MR)
+#define UART_PUT_MR(port,v) writel(v, (port)->membase + AT91_US_MR)
+#define UART_PUT_IER(port,v) writel(v, (port)->membase + AT91_US_IER)
+#define UART_PUT_IDR(port,v) writel(v, (port)->membase + AT91_US_IDR)
+#define UART_GET_IMR(port) readl((port)->membase + AT91_US_IMR)
+#define UART_GET_CSR(port) readl((port)->membase + AT91_US_CSR)
+#define UART_GET_CHAR(port) readl((port)->membase + AT91_US_RHR)
+#define UART_PUT_CHAR(port,v) writel(v, (port)->membase + AT91_US_THR)
+#define UART_GET_BRGR(port) readl((port)->membase + AT91_US_BRGR)
+#define UART_PUT_BRGR(port,v) writel(v, (port)->membase + AT91_US_BRGR)
+#define UART_PUT_RTOR(port,v) writel(v, (port)->membase + AT91_US_RTOR)
+
+// #define UART_GET_CR(port) readl((port)->membase + AT91_US_CR) // is write-only
+
+ /* PDC registers */
+#define UART_PUT_PTCR(port,v) writel(v, (port)->membase + AT91_PDC_PTCR)
+#define UART_PUT_RPR(port,v) writel(v, (port)->membase + AT91_PDC_RPR)
+#define UART_PUT_RCR(port,v) writel(v, (port)->membase + AT91_PDC_RCR)
+#define UART_GET_RCR(port) readl((port)->membase + AT91_PDC_RCR)
+#define UART_PUT_RNPR(port,v) writel(v, (port)->membase + AT91_PDC_RNPR)
+#define UART_PUT_RNCR(port,v) writel(v, (port)->membase + AT91_PDC_RNCR)
+
+
+static int (*at91_open)(struct uart_port *);
+static void (*at91_close)(struct uart_port *);
+
+#ifdef SUPPORT_SYSRQ
+static struct console at91_console;
+#endif
+
+/*
+ * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
+ */
+static u_int at91_tx_empty(struct uart_port *port)
+{
+ return (UART_GET_CSR(port) & AT91_US_TXEMPTY) ? TIOCSER_TEMT : 0;
+}
+
+/*
+ * Set state of the modem control output lines
+ */
+static void at91_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+ unsigned int control = 0;
+
+ /*
+ * Errata #39: RTS0 is not internally connected to PA21. We need to drive
+ * the pin manually.
+ */
+ if (port->mapbase == AT91_VA_BASE_US0) {
+ if (mctrl & TIOCM_RTS)
+ at91_sys_write(AT91_PIOA + PIO_CODR, AT91_PA21_RTS0);
+ else
+ at91_sys_write(AT91_PIOA + PIO_SODR, AT91_PA21_RTS0);
+ }
+
+ if (mctrl & TIOCM_RTS)
+ control |= AT91_US_RTSEN;
+ else
+ control |= AT91_US_RTSDIS;
+
+ if (mctrl & TIOCM_DTR)
+ control |= AT91_US_DTREN;
+ else
+ control |= AT91_US_DTRDIS;
+
+ UART_PUT_CR(port,control);
+}
+
+/*
+ * Get state of the modem control input lines
+ */
+static u_int at91_get_mctrl(struct uart_port *port)
+{
+ unsigned int status, ret = 0;
+
+ status = UART_GET_CSR(port);
+
+ /*
+ * The control signals are active low.
+ */
+ if (!(status & AT91_US_DCD))
+ ret |= TIOCM_CD;
+ if (!(status & AT91_US_CTS))
+ ret |= TIOCM_CTS;
+ if (!(status & AT91_US_DSR))
+ ret |= TIOCM_DSR;
+ if (!(status & AT91_US_RI))
+ ret |= TIOCM_RI;
+
+ return ret;
+}
+
+/*
+ * Stop transmitting.
+ */
+static void at91_stop_tx(struct uart_port *port)
+{
+ UART_PUT_IDR(port, AT91_US_TXRDY);
+ port->read_status_mask &= ~AT91_US_TXRDY;
+}
+
+/*
+ * Start transmitting.
+ */
+static void at91_start_tx(struct uart_port *port)
+{
+ port->read_status_mask |= AT91_US_TXRDY;
+ UART_PUT_IER(port, AT91_US_TXRDY);
+}
+
+/*
+ * Stop receiving - port is in process of being closed.
+ */
+static void at91_stop_rx(struct uart_port *port)
+{
+ UART_PUT_IDR(port, AT91_US_RXRDY);
+}
+
+/*
+ * Enable modem status interrupts
+ */
+static void at91_enable_ms(struct uart_port *port)
+{
+ port->read_status_mask |= (AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC);
+ UART_PUT_IER(port, AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC);
+}
+
+/*
+ * Control the transmission of a break signal
+ */
+static void at91_break_ctl(struct uart_port *port, int break_state)
+{
+ if (break_state != 0)
+ UART_PUT_CR(port, AT91_US_STTBRK); /* start break */
+ else
+ UART_PUT_CR(port, AT91_US_STPBRK); /* stop break */
+}
+
+/*
+ * Characters received (called from interrupt handler)
+ */
+static void at91_rx_chars(struct uart_port *port, struct pt_regs *regs)
+{
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, flg;
+
+ status = UART_GET_CSR(port) & port->read_status_mask;
+ while (status & (AT91_US_RXRDY)) {
+ ch = UART_GET_CHAR(port);
+
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ goto ignore_char;
+ port->icount.rx++;
+
+ flg = TTY_NORMAL;
+
+ /*
+ * note that the error handling code is
+ * out of the main execution path
+ */
+ if (unlikely(status & (AT91_US_PARE | AT91_US_FRAME | AT91_US_OVRE))) {
+ UART_PUT_CR(port, AT91_US_RSTSTA); /* clear error */
+ if (status & (AT91_US_PARE))
+ port->icount.parity++;
+ if (status & (AT91_US_FRAME))
+ port->icount.frame++;
+ if (status & (AT91_US_OVRE))
+ port->icount.overrun++;
+
+ if (status & AT91_US_PARE)
+ flg = TTY_PARITY;
+ else if (status & AT91_US_FRAME)
+ flg = TTY_FRAME;
+ if (status & AT91_US_OVRE) {
+ /*
+ * overrun does *not* affect the character
+ * we read from the FIFO
+ */
+ tty_insert_flip_char(tty, ch, flg);
+ ch = 0;
+ flg = TTY_OVERRUN;
+ }
+#ifdef SUPPORT_SYSRQ
+ port->sysrq = 0;
+#endif
+ }
+
+ if (uart_handle_sysrq_char(port, ch, regs))
+ goto ignore_char;
+
+ tty_insert_flip_char(tty, ch, flg);
+
+ ignore_char:
+ status = UART_GET_CSR(port) & port->read_status_mask;
+ }
+
+ tty_flip_buffer_push(tty);
+}
+
+/*
+ * Transmit characters (called from interrupt handler)
+ */
+static void at91_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+
+ if (port->x_char) {
+ UART_PUT_CHAR(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ at91_stop_tx(port);
+ return;
+ }
+
+ while (UART_GET_CSR(port) & AT91_US_TXRDY) {
+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ at91_stop_tx(port);
+}
+
+/*
+ * Interrupt handler
+ */
+static irqreturn_t at91_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_port *port = dev_id;
+ unsigned int status, pending, pass_counter = 0;
+
+ status = UART_GET_CSR(port);
+ pending = status & port->read_status_mask;
+ if (pending) {
+ do {
+ if (pending & AT91_US_RXRDY)
+ at91_rx_chars(port, regs);
+
+ /* Clear the relevent break bits */
+ if (pending & AT91_US_RXBRK) {
+ UART_PUT_CR(port, AT91_US_RSTSTA);
+ port->icount.brk++;
+ uart_handle_break(port);
+ }
+
+ // TODO: All reads to CSR will clear these interrupts!
+ if (pending & AT91_US_RIIC) port->icount.rng++;
+ if (pending & AT91_US_DSRIC) port->icount.dsr++;
+ if (pending & AT91_US_DCDIC)
+ uart_handle_dcd_change(port, !(status & AT91_US_DCD));
+ if (pending & AT91_US_CTSIC)
+ uart_handle_cts_change(port, !(status & AT91_US_CTS));
+ if (pending & (AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC))
+ wake_up_interruptible(&port->info->delta_msr_wait);
+
+ if (pending & AT91_US_TXRDY)
+ at91_tx_chars(port);
+ if (pass_counter++ > AT91_ISR_PASS_LIMIT)
+ break;
+
+ status = UART_GET_CSR(port);
+ pending = status & port->read_status_mask;
+ } while (pending);
+ }
+ return IRQ_HANDLED;
+}
+
+/*
+ * Perform initialization and enable port for reception
+ */
+static int at91_startup(struct uart_port *port)
+{
+ int retval;
+
+ /*
+ * Ensure that no interrupts are enabled otherwise when
+ * request_irq() is called we could get stuck trying to
+ * handle an unexpected interrupt
+ */
+ UART_PUT_IDR(port, -1);
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(port->irq, at91_interrupt, SA_SHIRQ, "at91_serial", port);
+ if (retval) {
+ printk("at91_serial: at91_startup - Can't get irq\n");
+ return retval;
+ }
+
+ /*
+ * If there is a specific "open" function (to register
+ * control line interrupts)
+ */
+ if (at91_open) {
+ retval = at91_open(port);
+ if (retval) {
+ free_irq(port->irq, port);
+ return retval;
+ }
+ }
+
+ port->read_status_mask = AT91_US_RXRDY | AT91_US_TXRDY | AT91_US_OVRE
+ | AT91_US_FRAME | AT91_US_PARE | AT91_US_RXBRK;
+ /*
+ * Finally, enable the serial port
+ */
+ UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX);
+ UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN); /* enable xmit & rcvr */
+ UART_PUT_IER(port, AT91_US_RXRDY); /* do receive only */
+ return 0;
+}
+
+/*
+ * Disable the port
+ */
+static void at91_shutdown(struct uart_port *port)
+{
+ /*
+ * Disable all interrupts, port and break condition.
+ */
+ UART_PUT_CR(port, AT91_US_RSTSTA);
+ UART_PUT_IDR(port, -1);
+
+ /*
+ * Free the interrupt
+ */
+ free_irq(port->irq, port);
+
+ /*
+ * If there is a specific "close" function (to unregister
+ * control line interrupts)
+ */
+ if (at91_close)
+ at91_close(port);
+}
+
+/*
+ * Power / Clock management.
+ */
+static void at91_serial_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
+{
+ switch (state) {
+ case 0:
+ /*
+ * Enable the peripheral clock for this serial port.
+ * This is called on uart_open() or a resume event.
+ */
+ at91_sys_write(AT91_PMC_PCER, 1 << port->irq);
+ break;
+ case 3:
+ /*
+ * Disable the peripheral clock for this serial port.
+ * This is called on uart_close() or a suspend event.
+ */
+ if (port->irq != AT91_ID_SYS) /* is this a shared clock? */
+ at91_sys_write(AT91_PMC_PCDR, 1 << port->irq);
+ break;
+ default:
+ printk(KERN_ERR "at91_serial: unknown pm %d\n", state);
+ }
+}
+
+/*
+ * Change the port parameters
+ */
+static void at91_set_termios(struct uart_port *port, struct termios * termios, struct termios * old)
+{
+ unsigned long flags;
+ unsigned int mode, imr, quot, baud;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ /* Get current mode register */
+ mode = UART_GET_MR(port) & ~(AT91_US_CHRL | AT91_US_NBSTOP | AT91_US_PAR);
+
+ /* byte size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ mode |= AT91_US_CHRL_5;
+ break;
+ case CS6:
+ mode |= AT91_US_CHRL_6;
+ break;
+ case CS7:
+ mode |= AT91_US_CHRL_7;
+ break;
+ default:
+ mode |= AT91_US_CHRL_8;
+ break;
+ }
+
+ /* stop bits */
+ if (termios->c_cflag & CSTOPB)
+ mode |= AT91_US_NBSTOP_2;
+
+ /* parity */
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */
+ if (termios->c_cflag & PARODD)
+ mode |= AT91_US_PAR_MARK;
+ else
+ mode |= AT91_US_PAR_SPACE;
+ }
+ else if (termios->c_cflag & PARODD)
+ mode |= AT91_US_PAR_ODD;
+ else
+ mode |= AT91_US_PAR_EVEN;
+ }
+ else
+ mode |= AT91_US_PAR_NONE;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ port->read_status_mask |= AT91_US_OVRE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= AT91_US_FRAME | AT91_US_PARE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= AT91_US_RXBRK;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= (AT91_US_FRAME | AT91_US_PARE);
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= AT91_US_RXBRK;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= AT91_US_OVRE;
+ }
+
+ // TODO: Ignore all characters if CREAD is set.
+
+ /* update the per-port timeout */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /* disable interrupts and drain transmitter */
+ imr = UART_GET_IMR(port); /* get interrupt mask */
+ UART_PUT_IDR(port, -1); /* disable all interrupts */
+ while (!(UART_GET_CSR(port) & AT91_US_TXEMPTY)) { barrier(); }
+
+ /* disable receiver and transmitter */
+ UART_PUT_CR(port, AT91_US_TXDIS | AT91_US_RXDIS);
+
+ /* set the parity, stop bits and data size */
+ UART_PUT_MR(port, mode);
+
+ /* set the baud rate */
+ UART_PUT_BRGR(port, quot);
+ UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX);
+ UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN);
+
+ /* restore interrupts */
+ UART_PUT_IER(port, imr);
+
+ /* CTS flow-control and modem-status interrupts */
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ port->ops->enable_ms(port);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * Return string describing the specified port
+ */
+static const char *at91_type(struct uart_port *port)
+{
+ return (port->type == PORT_AT91RM9200) ? "AT91_SERIAL" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'.
+ */
+static void at91_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase,
+ (port->mapbase == AT91_VA_BASE_DBGU) ? 512 : SZ_16K);
+}
+
+/*
+ * Request the memory region(s) being used by 'port'.
+ */
+static int at91_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->mapbase,
+ (port->mapbase == AT91_VA_BASE_DBGU) ? 512 : SZ_16K,
+ "at91_serial") != NULL ? 0 : -EBUSY;
+
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void at91_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_AT91RM9200;
+ at91_request_port(port);
+ }
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int at91_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_AT91RM9200)
+ ret = -EINVAL;
+ if (port->irq != ser->irq)
+ ret = -EINVAL;
+ if (ser->io_type != SERIAL_IO_MEM)
+ ret = -EINVAL;
+ if (port->uartclk / 16 != ser->baud_base)
+ ret = -EINVAL;
+ if ((void *)port->mapbase != ser->iomem_base)
+ ret = -EINVAL;
+ if (port->iobase != ser->port)
+ ret = -EINVAL;
+ if (ser->hub6 != 0)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops at91_pops = {
+ .tx_empty = at91_tx_empty,
+ .set_mctrl = at91_set_mctrl,
+ .get_mctrl = at91_get_mctrl,
+ .stop_tx = at91_stop_tx,
+ .start_tx = at91_start_tx,
+ .stop_rx = at91_stop_rx,
+ .enable_ms = at91_enable_ms,
+ .break_ctl = at91_break_ctl,
+ .startup = at91_startup,
+ .shutdown = at91_shutdown,
+ .set_termios = at91_set_termios,
+ .type = at91_type,
+ .release_port = at91_release_port,
+ .request_port = at91_request_port,
+ .config_port = at91_config_port,
+ .verify_port = at91_verify_port,
+ .pm = at91_serial_pm,
+};
+
+static struct uart_port at91_ports[AT91_NR_UART];
+
+void __init at91_init_ports(void)
+{
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0; i < AT91_NR_UART; i++) {
+ at91_ports[i].iotype = UPIO_MEM;
+ at91_ports[i].flags = UPF_BOOT_AUTOCONF;
+ at91_ports[i].uartclk = at91_master_clock;
+ at91_ports[i].ops = &at91_pops;
+ at91_ports[i].fifosize = 1;
+ at91_ports[i].line = i;
+ }
+}
+
+void __init at91_register_uart_fns(struct at91rm9200_port_fns *fns)
+{
+ if (fns->enable_ms)
+ at91_pops.enable_ms = fns->enable_ms;
+ if (fns->get_mctrl)
+ at91_pops.get_mctrl = fns->get_mctrl;
+ if (fns->set_mctrl)
+ at91_pops.set_mctrl = fns->set_mctrl;
+ at91_open = fns->open;
+ at91_close = fns->close;
+ at91_pops.pm = fns->pm;
+ at91_pops.set_wake = fns->set_wake;
+}
+
+/*
+ * Setup ports.
+ */
+void __init at91_register_uart(int idx, int port)
+{
+ if ((idx < 0) || (idx >= AT91_NR_UART)) {
+ printk(KERN_ERR "%s: bad index number %d\n", __FUNCTION__, idx);
+ return;
+ }
+
+ switch (port) {
+ case 0:
+ at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_US0;
+ at91_ports[idx].mapbase = AT91_VA_BASE_US0;
+ at91_ports[idx].irq = AT91_ID_US0;
+ AT91_CfgPIO_USART0();
+ break;
+ case 1:
+ at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_US1;
+ at91_ports[idx].mapbase = AT91_VA_BASE_US1;
+ at91_ports[idx].irq = AT91_ID_US1;
+ AT91_CfgPIO_USART1();
+ break;
+ case 2:
+ at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_US2;
+ at91_ports[idx].mapbase = AT91_VA_BASE_US2;
+ at91_ports[idx].irq = AT91_ID_US2;
+ AT91_CfgPIO_USART2();
+ break;
+ case 3:
+ at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_US3;
+ at91_ports[idx].mapbase = AT91_VA_BASE_US3;
+ at91_ports[idx].irq = AT91_ID_US3;
+ AT91_CfgPIO_USART3();
+ break;
+ case 4:
+ at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_DBGU;
+ at91_ports[idx].mapbase = AT91_VA_BASE_DBGU;
+ at91_ports[idx].irq = AT91_ID_SYS;
+ AT91_CfgPIO_DBGU();
+ break;
+ default:
+ printk(KERN_ERR "%s : bad port number %d\n", __FUNCTION__, port);
+ }
+}
+
+#ifdef CONFIG_SERIAL_AT91_CONSOLE
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void at91_console_write(struct console *co, const char *s, u_int count)
+{
+ struct uart_port *port = at91_ports + co->index;
+ unsigned int status, i, imr;
+
+ /*
+ * First, save IMR and then disable interrupts
+ */
+ imr = UART_GET_IMR(port); /* get interrupt mask */
+ UART_PUT_IDR(port, AT91_US_RXRDY | AT91_US_TXRDY);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++) {
+ do {
+ status = UART_GET_CSR(port);
+ } while (!(status & AT91_US_TXRDY));
+ UART_PUT_CHAR(port, s[i]);
+ if (s[i] == '\n') {
+ do {
+ status = UART_GET_CSR(port);
+ } while (!(status & AT91_US_TXRDY));
+ UART_PUT_CHAR(port, '\r');
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore IMR
+ */
+ do {
+ status = UART_GET_CSR(port);
+ } while (!(status & AT91_US_TXRDY));
+ UART_PUT_IER(port, imr); /* set interrupts back the way they were */
+}
+
+/*
+ * If the port was already initialised (eg, by a boot loader), try to determine
+ * the current setup.
+ */
+static void __init at91_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
+{
+ unsigned int mr, quot;
+
+// TODO: CR is a write-only register
+// unsigned int cr;
+//
+// cr = UART_GET_CR(port) & (AT91_US_RXEN | AT91_US_TXEN);
+// if (cr == (AT91_US_RXEN | AT91_US_TXEN)) {
+// /* ok, the port was enabled */
+// }
+
+ mr = UART_GET_MR(port) & AT91_US_CHRL;
+ if (mr == AT91_US_CHRL_8)
+ *bits = 8;
+ else
+ *bits = 7;
+
+ mr = UART_GET_MR(port) & AT91_US_PAR;
+ if (mr == AT91_US_PAR_EVEN)
+ *parity = 'e';
+ else if (mr == AT91_US_PAR_ODD)
+ *parity = 'o';
+
+ quot = UART_GET_BRGR(port);
+ *baud = port->uartclk / (16 * (quot));
+}
+
+static int __init at91_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ port = uart_get_console(at91_ports, AT91_NR_UART, co);
+
+ /*
+ * Enable the serial console, in-case bootloader did not do it.
+ */
+ at91_sys_write(AT91_PMC_PCER, 1 << port->irq); /* enable clock */
+ UART_PUT_IDR(port, -1); /* disable interrupts */
+ UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX);
+ UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ at91_console_get_options(port, &baud, &parity, &bits);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver at91_uart;
+
+static struct console at91_console = {
+ .name = AT91_DEVICENAME,
+ .write = at91_console_write,
+ .device = uart_console_device,
+ .setup = at91_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &at91_uart,
+};
+
+#define AT91_CONSOLE_DEVICE &at91_console
+
+static int __init at91_console_init(void)
+{
+ at91_init_ports();
+
+ at91_console.index = at91_console_port;
+ register_console(&at91_console);
+ return 0;
+}
+console_initcall(at91_console_init);
+
+#else
+#define AT91_CONSOLE_DEVICE NULL
+#endif
+
+static struct uart_driver at91_uart = {
+ .owner = THIS_MODULE,
+ .driver_name = AT91_DEVICENAME,
+ .dev_name = AT91_DEVICENAME,
+ .devfs_name = AT91_DEVICENAME,
+ .major = SERIAL_AT91_MAJOR,
+ .minor = MINOR_START,
+ .nr = AT91_NR_UART,
+ .cons = AT91_CONSOLE_DEVICE,
+};
+
+static int __init at91_serial_init(void)
+{
+ int ret, i;
+
+ at91_init_ports();
+
+ ret = uart_register_driver(&at91_uart);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < AT91_NR_UART; i++) {
+ if (at91_serial_map[i] >= 0)
+ uart_add_one_port(&at91_uart, &at91_ports[i]);
+ }
+
+ return 0;
+}
+
+static void __exit at91_serial_exit(void)
+{
+ int i;
+
+ for (i = 0; i < AT91_NR_UART; i++) {
+ if (at91_serial_map[i] >= 0)
+ uart_remove_one_port(&at91_uart, &at91_ports[i]);
+ }
+
+ uart_unregister_driver(&at91_uart);
+}
+
+module_init(at91_serial_init);
+module_exit(at91_serial_exit);
+
+MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("AT91 generic serial port driver");
+MODULE_LICENSE("GPL");
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h
new file mode 100644
index 00000000000..ce1150d4438
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Peripheral Data Controller (PDC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_PDC_H
+#define AT91RM9200_PDC_H
+
+#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
+#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
+#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
+#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
+#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
+#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
+#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
+#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
+
+#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
+#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
+#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
+#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
+#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
+
+#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h b/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h
new file mode 100644
index 00000000000..79f851e31b9
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h
@@ -0,0 +1,123 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_usart.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * USART registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_USART_H
+#define AT91RM9200_USART_H
+
+#define AT91_US_CR 0x00 /* Control Register */
+#define AT91_US_RSTRX (1 << 2) /* Reset Receiver */
+#define AT91_US_RSTTX (1 << 3) /* Reset Transmitter */
+#define AT91_US_RXEN (1 << 4) /* Receiver Enable */
+#define AT91_US_RXDIS (1 << 5) /* Receiver Disable */
+#define AT91_US_TXEN (1 << 6) /* Transmitter Enable */
+#define AT91_US_TXDIS (1 << 7) /* Transmitter Disable */
+#define AT91_US_RSTSTA (1 << 8) /* Reset Status Bits */
+#define AT91_US_STTBRK (1 << 9) /* Start Break */
+#define AT91_US_STPBRK (1 << 10) /* Stop Break */
+#define AT91_US_STTTO (1 << 11) /* Start Time-out */
+#define AT91_US_SENDA (1 << 12) /* Send Address */
+#define AT91_US_RSTIT (1 << 13) /* Reset Iterations */
+#define AT91_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */
+#define AT91_US_RETTO (1 << 15) /* Rearm Time-out */
+#define AT91_US_DTREN (1 << 16) /* Data Terminal Ready Enable */
+#define AT91_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable */
+#define AT91_US_RTSEN (1 << 18) /* Request To Send Enable */
+#define AT91_US_RTSDIS (1 << 19) /* Request To Send Disable */
+
+#define AT91_US_MR 0x04 /* Mode Register */
+#define AT91_US_USMODE (0xf << 0) /* Mode of the USART */
+#define AT91_US_USMODE_NORMAL 0
+#define AT91_US_USMODE_RS485 1
+#define AT91_US_USMODE_HWHS 2
+#define AT91_US_USMODE_MODEM 3
+#define AT91_US_USMODE_ISO7816_T0 4
+#define AT91_US_USMODE_ISO7816_T1 6
+#define AT91_US_USMODE_IRDA 8
+#define AT91_US_USCLKS (3 << 4) /* Clock Selection */
+#define AT91_US_CHRL (3 << 6) /* Character Length */
+#define AT91_US_CHRL_5 (0 << 6)
+#define AT91_US_CHRL_6 (1 << 6)
+#define AT91_US_CHRL_7 (2 << 6)
+#define AT91_US_CHRL_8 (3 << 6)
+#define AT91_US_SYNC (1 << 8) /* Synchronous Mode Select */
+#define AT91_US_PAR (7 << 9) /* Parity Type */
+#define AT91_US_PAR_EVEN (0 << 9)
+#define AT91_US_PAR_ODD (1 << 9)
+#define AT91_US_PAR_SPACE (2 << 9)
+#define AT91_US_PAR_MARK (3 << 9)
+#define AT91_US_PAR_NONE (4 << 9)
+#define AT91_US_PAR_MULTI_DROP (6 << 9)
+#define AT91_US_NBSTOP (3 << 12) /* Number of Stop Bits */
+#define AT91_US_NBSTOP_1 (0 << 12)
+#define AT91_US_NBSTOP_1_5 (1 << 12)
+#define AT91_US_NBSTOP_2 (2 << 12)
+#define AT91_US_CHMODE (3 << 14) /* Channel Mode */
+#define AT91_US_CHMODE_NORMAL (0 << 14)
+#define AT91_US_CHMODE_ECHO (1 << 14)
+#define AT91_US_CHMODE_LOC_LOOP (2 << 14)
+#define AT91_US_CHMODE_REM_LOOP (3 << 14)
+#define AT91_US_MSBF (1 << 16) /* Bit Order */
+#define AT91_US_MODE9 (1 << 17) /* 9-bit Character Length */
+#define AT91_US_CLKO (1 << 18) /* Clock Output Select */
+#define AT91_US_OVER (1 << 19) /* Oversampling Mode */
+#define AT91_US_INACK (1 << 20) /* Inhibit Non Acknowledge */
+#define AT91_US_DSNACK (1 << 21) /* Disable Successive NACK */
+#define AT91_US_MAX_ITER (7 << 24) /* Max Iterations */
+#define AT91_US_FILTER (1 << 28) /* Infrared Receive Line Filter */
+
+#define AT91_US_IER 0x08 /* Interrupt Enable Register */
+#define AT91_US_RXRDY (1 << 0) /* Receiver Ready */
+#define AT91_US_TXRDY (1 << 1) /* Transmitter Ready */
+#define AT91_US_RXBRK (1 << 2) /* Break Received / End of Break */
+#define AT91_US_ENDRX (1 << 3) /* End of Receiver Transfer */
+#define AT91_US_ENDTX (1 << 4) /* End of Transmitter Transfer */
+#define AT91_US_OVRE (1 << 5) /* Overrun Error */
+#define AT91_US_FRAME (1 << 6) /* Framing Error */
+#define AT91_US_PARE (1 << 7) /* Parity Error */
+#define AT91_US_TIMEOUT (1 << 8) /* Receiver Time-out */
+#define AT91_US_TXEMPTY (1 << 9) /* Transmitter Empty */
+#define AT91_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */
+#define AT91_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */
+#define AT91_US_RXBUFF (1 << 12) /* Reception Buffer Full */
+#define AT91_US_NACK (1 << 13) /* Non Acknowledge */
+#define AT91_US_RIIC (1 << 16) /* Ring Indicator Input Change */
+#define AT91_US_DSRIC (1 << 17) /* Data Set Ready Input Change */
+#define AT91_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change */
+#define AT91_US_CTSIC (1 << 19) /* Clear to Send Input Change */
+#define AT91_US_RI (1 << 20) /* RI */
+#define AT91_US_DSR (1 << 21) /* DSR */
+#define AT91_US_DCD (1 << 22) /* DCD */
+#define AT91_US_CTS (1 << 23) /* CTS */
+
+#define AT91_US_IDR 0x0c /* Interrupt Disable Register */
+#define AT91_US_IMR 0x10 /* Interrupt Mask Register */
+#define AT91_US_CSR 0x14 /* Channel Status Register */
+#define AT91_US_RHR 0x18 /* Receiver Holding Register */
+#define AT91_US_THR 0x1c /* Transmitter Holding Register */
+
+#define AT91_US_BRGR 0x20 /* Baud Rate Generator Register */
+#define AT91_US_CD (0xffff << 0) /* Clock Divider */
+
+#define AT91_US_RTOR 0x24 /* Receiver Time-out Register */
+#define AT91_US_TO (0xffff << 0) /* Time-out Value */
+
+#define AT91_US_TTGR 0x28 /* Transmitter Timeguard Register */
+#define AT91_US_TG (0xff << 0) /* Timeguard Value */
+
+#define AT91_US_FIDI 0x40 /* FI DI Ratio Register */
+#define AT91_US_NER 0x44 /* Number of Errors Register */
+#define AT91_US_IF 0x4c /* IrDA Filter Register */
+
+#endif
diff --git a/include/asm-arm/byteorder.h b/include/asm-arm/byteorder.h
index 741f5bc5d01..17eaf8bdf09 100644
--- a/include/asm-arm/byteorder.h
+++ b/include/asm-arm/byteorder.h
@@ -22,7 +22,16 @@ static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
{
__u32 t;
- t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
+ if (__builtin_constant_p(x)) {
+ t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
+ } else {
+ /*
+ * The compiler needs a bit of a hint here to always do the
+ * right thing and not screw it up to different degrees
+ * depending on the gcc version.
+ */
+ asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
+ }
x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */
t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */
x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */
diff --git a/include/asm-arm/mach/serial_at91rm9200.h b/include/asm-arm/mach/serial_at91rm9200.h
new file mode 100644
index 00000000000..98f4b0cb883
--- /dev/null
+++ b/include/asm-arm/mach/serial_at91rm9200.h
@@ -0,0 +1,36 @@
+/*
+ * linux/include/asm-arm/mach/serial_at91rm9200.h
+ *
+ * Based on serial_sa1100.h by Nicolas Pitre
+ *
+ * Copyright (C) 2002 ATMEL Rousset
+ *
+ * Low level machine dependent UART functions.
+ */
+#include <linux/config.h>
+
+struct uart_port;
+
+/*
+ * This is a temporary structure for registering these
+ * functions; it is intended to be discarded after boot.
+ */
+struct at91rm9200_port_fns {
+ void (*set_mctrl)(struct uart_port *, u_int);
+ u_int (*get_mctrl)(struct uart_port *);
+ void (*enable_ms)(struct uart_port *);
+ void (*pm)(struct uart_port *, u_int, u_int);
+ int (*set_wake)(struct uart_port *, u_int);
+ int (*open)(struct uart_port *);
+ void (*close)(struct uart_port *);
+};
+
+#if defined(CONFIG_SERIAL_AT91)
+void at91_register_uart_fns(struct at91rm9200_port_fns *fns);
+void at91_register_uart(int idx, int port);
+#else
+#define at91_register_uart_fns(fns) do { } while (0)
+#define at91_register_uart(idx,port) do { } while (0)
+#endif
+
+
diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
index 3d7f08bd903..b4e1146ab68 100644
--- a/include/asm-arm/memory.h
+++ b/include/asm-arm/memory.h
@@ -25,6 +25,7 @@
#include <linux/config.h>
#include <linux/compiler.h>
#include <asm/arch/memory.h>
+#include <asm/sizes.h>
#ifndef TASK_SIZE
/*
@@ -48,6 +49,14 @@
#endif
/*
+ * Size of DMA-consistent memory region. Must be multiple of 2M,
+ * between 2MB and 14MB inclusive.
+ */
+#ifndef CONSISTENT_DMA_SIZE
+#define CONSISTENT_DMA_SIZE SZ_2M
+#endif
+
+/*
* Physical vs virtual RAM address space conversion. These are
* private definitions which should NOT be used outside memory.h
* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index e3710d7e260..a8187c3c8a7 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -67,6 +67,9 @@
/* Parisc type numbers. */
#define PORT_MUX 48
+/* Atmel AT91RM9200 SoC */
+#define PORT_AT91RM9200 49
+
/* Macintosh Zilog type numbers */
#define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */
#define PORT_PMAC_ZILOG 51