aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-s3c2410/Kconfig7
-rw-r--r--arch/arm/mach-s3c2410/Makefile1
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-clock.h33
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-gpio.h7
-rw-r--r--arch/arm/mach-s3c2410/include/mach/spi.h7
-rw-r--r--arch/arm/mach-s3c2410/mach-h1940.c8
-rw-r--r--arch/arm/mach-s3c2410/s3c2410.c27
-rw-r--r--arch/arm/mach-s3c2412/s3c2412.c25
-rw-r--r--arch/arm/mach-s3c2440/Kconfig2
-rw-r--r--arch/arm/mach-s3c2443/clock.c35
-rw-r--r--arch/arm/mach-s3c2443/s3c2443.c3
-rw-r--r--arch/arm/plat-s3c/Kconfig8
-rw-r--r--arch/arm/plat-s3c/Makefile18
-rw-r--r--arch/arm/plat-s3c/clock.c359
-rw-r--r--arch/arm/plat-s3c/include/mach/io.h18
-rw-r--r--arch/arm/plat-s3c/include/mach/timex.h (renamed from arch/arm/mach-s3c2410/include/mach/timex.h)0
-rw-r--r--arch/arm/plat-s3c/include/mach/vmalloc.h (renamed from arch/arm/mach-s3c2410/include/mach/vmalloc.h)2
-rw-r--r--arch/arm/plat-s3c/include/plat/adc.h29
-rw-r--r--arch/arm/plat-s3c/include/plat/clock.h (renamed from arch/arm/plat-s3c24xx/include/plat/clock.h)22
-rw-r--r--arch/arm/plat-s3c/include/plat/cpu-freq.h94
-rw-r--r--arch/arm/plat-s3c/include/plat/cpu.h (renamed from arch/arm/plat-s3c24xx/include/plat/cpu.h)19
-rw-r--r--arch/arm/plat-s3c/include/plat/devs.h (renamed from arch/arm/plat-s3c24xx/include/plat/devs.h)0
-rw-r--r--arch/arm/plat-s3c/include/plat/regs-irqtype.h21
-rw-r--r--arch/arm/plat-s3c/include/plat/uncompress.h28
-rw-r--r--arch/arm/plat-s3c/init.c161
-rw-r--r--arch/arm/plat-s3c/pwm-clock.c (renamed from arch/arm/plat-s3c24xx/pwm-clock.c)55
-rw-r--r--arch/arm/plat-s3c/time.c (renamed from arch/arm/plat-s3c24xx/time.c)8
-rw-r--r--arch/arm/plat-s3c24xx/Kconfig36
-rw-r--r--arch/arm/plat-s3c24xx/Makefile13
-rw-r--r--arch/arm/plat-s3c24xx/adc.c372
-rw-r--r--arch/arm/plat-s3c24xx/clock-dclk.c194
-rw-r--r--arch/arm/plat-s3c24xx/clock.c493
-rw-r--r--arch/arm/plat-s3c24xx/cpu.c141
-rw-r--r--arch/arm/plat-s3c24xx/devs.c10
-rw-r--r--arch/arm/plat-s3c24xx/gpiolib.c49
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/pll.h37
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/s3c2400.h2
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/s3c2410.h2
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/s3c2412.h2
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/s3c2443.h2
-rw-r--r--arch/arm/plat-s3c24xx/irq.c1
-rw-r--r--arch/arm/plat-s3c24xx/pm.c4
-rw-r--r--arch/arm/plat-s3c24xx/s3c2410-clock.c (renamed from arch/arm/mach-s3c2410/clock.c)0
-rw-r--r--arch/arm/plat-s3c24xx/s3c244x-clock.c5
-rw-r--r--arch/arm/plat-s3c24xx/s3c244x.c27
-rw-r--r--arch/arm/plat-s3c24xx/s3c244x.h2
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c37
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c37
-rw-r--r--drivers/serial/samsung.c96
-rw-r--r--drivers/serial/samsung.h6
50 files changed, 1800 insertions, 765 deletions
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 7315569fbfd..63a30d1dd42 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -33,11 +33,6 @@ config S3C2410_GPIO
help
GPIO code for S3C2410 and similar processors
-config S3C2410_CLOCK
- bool
- help
- Clock code for the S3C2410, and similar processors
-
config SIMTEC_NOR
bool
help
@@ -85,6 +80,7 @@ config ARCH_BAST
select PM_SIMTEC if PM
select SIMTEC_NOR
select MACH_BAST_IDE
+ select S3C24XX_DCLK
select ISA
help
Say Y here if you are using the Simtec Electronics EB2410ITX
@@ -122,6 +118,7 @@ config MACH_TCT_HAMMER
config MACH_VR1000
bool "Thorcom VR1000"
select PM_SIMTEC if PM
+ select S3C24XX_DCLK
select SIMTEC_NOR
select MACH_BAST_IDE
select CPU_S3C2410
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 00f31f8c4e7..fca02f82711 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
obj-$(CONFIG_S3C2410_GPIO) += gpio.o
-obj-$(CONFIG_S3C2410_CLOCK) += clock.o
# Machine support
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index b3f90aa7807..2a5d90e957f 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -42,13 +42,6 @@
#define S3C2410_CLKCON_IIS (1<<17)
#define S3C2410_CLKCON_SPI (1<<18)
-#define S3C2410_PLLCON_MDIVSHIFT 12
-#define S3C2410_PLLCON_PDIVSHIFT 4
-#define S3C2410_PLLCON_SDIVSHIFT 0
-#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1)
-#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1)
-#define S3C2410_PLLCON_SDIVMASK 3
-
/* DCLKCON register addresses in gpio.h */
#define S3C2410_DCLKCON_DCLK0EN (1<<0)
@@ -76,32 +69,6 @@
#define S3C2410_CLKSLOW_SLOWVAL(x) (x)
#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7)
-#ifndef __ASSEMBLY__
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
-{
- unsigned int mdiv, pdiv, sdiv;
- uint64_t fvco;
-
- mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
- pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
- sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
-
- mdiv &= S3C2410_PLLCON_MDIVMASK;
- pdiv &= S3C2410_PLLCON_PDIVMASK;
- sdiv &= S3C2410_PLLCON_SDIVMASK;
-
- fvco = (uint64_t)baseclk * (mdiv + 8);
- do_div(fvco, (pdiv + 2) << sdiv);
-
- return (unsigned int)fvco;
-}
-
-#endif /* __ASSEMBLY__ */
-
#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
/* extra registers */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 528080ceac4..32107761306 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -1053,13 +1053,6 @@
#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C)
#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90)
-/* values for S3C2410_EXTINT0/1/2 */
-#define S3C2410_EXTINT_LOWLEV (0x00)
-#define S3C2410_EXTINT_HILEV (0x01)
-#define S3C2410_EXTINT_FALLEDGE (0x02)
-#define S3C2410_EXTINT_RISEEDGE (0x04)
-#define S3C2410_EXTINT_BOTHEDGE (0x06)
-
/* interrupt filtering conrrol for EINT16..EINT23 */
#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94)
#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98)
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 46d46f5b99f..774f3adfe8a 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -22,5 +22,12 @@ struct s3c2410_spi_info {
void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
};
+/* Standard setup / suspend routines for SPI GPIO pins. */
+
+extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
+ int enable);
+
+extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
+ int enable);
#endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 32d550fcff4..836508b829b 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -43,6 +43,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/pll.h>
#include <plat/pm.h>
static struct map_desc h1940_iodesc[] __initdata = {
@@ -223,10 +224,9 @@ static void __init h1940_init(void)
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
- tmp = (
- 0x78 << S3C2410_PLLCON_MDIVSHIFT)
- | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
- | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
+ tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
+ | (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
+ | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
writel(tmp, S3C2410_UPLLCON);
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index ac79b536c4c..feb141b1f91 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/clk.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@@ -28,6 +29,8 @@
#include <mach/hardware.h>
#include <asm/irq.h>
+#include <plat/cpu-freq.h>
+
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
@@ -35,6 +38,7 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
+#include <plat/pll.h>
/* Initial IO mappings */
@@ -59,25 +63,28 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
* machine specific initialisation.
*/
-void __init s3c2410_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2410_map_io(void)
{
- /* register our io-tables */
-
iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
- iotable_init(mach_desc, mach_size);
}
-void __init s3c2410_init_clocks(int xtal)
+void __init_or_cpufreq s3c2410_setup_clocks(void)
{
+ struct clk *xtal_clk;
unsigned long tmp;
+ unsigned long xtal;
unsigned long fclk;
unsigned long hclk;
unsigned long pclk;
+ xtal_clk = clk_get(NULL, "xtal");
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
/* now we've got our machine bits initialised, work out what
* clocks we've got */
- fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
+ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
tmp = __raw_readl(S3C2410_CLKDIVN);
@@ -95,7 +102,13 @@ void __init s3c2410_init_clocks(int xtal)
* console to use them
*/
- s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+ s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2410_init_clocks(int xtal)
+{
+ s3c24xx_register_baseclocks(xtal);
+ s3c2410_setup_clocks();
s3c2410_baseclk_add();
}
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index a086818e117..5b5aba69ec3 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
@@ -33,6 +34,8 @@
#include <mach/reset.h>
#include <mach/idle.h>
+#include <plat/cpu-freq.h>
+
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-power.h>
@@ -47,6 +50,7 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pm.h>
+#include <plat/pll.h>
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
@@ -136,7 +140,7 @@ static void s3c2412_hard_reset(void)
* machine specific initialisation.
*/
-void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2412_map_io(void)
{
/* move base of IO */
@@ -153,20 +157,25 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
/* register our io-tables */
iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
- iotable_init(mach_desc, mach_size);
}
-void __init s3c2412_init_clocks(int xtal)
+void __init_or_cpufreq s3c2412_setup_clocks(void)
{
+ struct clk *xtal_clk;
unsigned long tmp;
+ unsigned long xtal;
unsigned long fclk;
unsigned long hclk;
unsigned long pclk;
+ xtal_clk = clk_get(NULL, "xtal");
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
/* now we've got our machine bits initialised, work out what
* clocks we've got */
- fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
+ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
clk_mpll.rate = fclk;
@@ -183,11 +192,17 @@ void __init s3c2412_init_clocks(int xtal)
printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+ s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2412_init_clocks(int xtal)
+{
/* initialise the clocks here, to allow other things like the
* console to use them
*/
- s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+ s3c24xx_register_baseclocks(xtal);
+ s3c2412_setup_clocks();
s3c2412_baseclk_add();
}
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 402213dc5d8..cde5ae9a434 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -29,6 +29,7 @@ menu "S3C2440 Machines"
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select CPU_S3C2440
+ select S3C24XX_DCLK
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
@@ -39,6 +40,7 @@ config MACH_ANUBIS
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
+ select S3C24XX_DCLK
select PM_SIMTEC if PM
select S3C24XX_GPIO_EXTRA128
help
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index f854e7385e3..1df8429242b 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -39,6 +39,8 @@
#include <mach/regs-s3c2443-clock.h>
+#include <plat/cpu-freq.h>
+
#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/cpu.h>
@@ -1011,22 +1013,20 @@ static struct clk *clks[] __initdata = {
&clk_prediv,
};
-void __init s3c2443_init_clocks(int xtal)
+void __init_or_cpufreq s3c2443_setup_clocks(void)
{
- unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+ struct clk *xtal_clk;
+ unsigned long xtal;
unsigned long pll;
unsigned long fclk;
unsigned long hclk;
unsigned long pclk;
- struct clk *clkp;
- int ret;
- int ptr;
- /* s3c2443 parents h and p clocks from prediv */
- clk_h.parent = &clk_prediv;
- clk_p.parent = &clk_prediv;
+ xtal_clk = clk_get(NULL, "xtal");
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
pll = s3c2443_get_mpll(mpllcon, xtal);
clk_msysclk.rate = pll;
@@ -1036,13 +1036,29 @@ void __init s3c2443_init_clocks(int xtal)
hclk /= s3c2443_get_hdiv(clkdiv0);
pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
- s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+ s3c24xx_setup_clocks(fclk, hclk, pclk);
printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
(mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
print_mhz(pll), print_mhz(fclk),
print_mhz(hclk), print_mhz(pclk));
+ s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2443_init_clocks(int xtal)
+{
+ struct clk *clkp;
+ unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+ int ret;
+ int ptr;
+
+ /* s3c2443 parents h and p clocks from prediv */
+ clk_h.parent = &clk_prediv;
+ clk_p.parent = &clk_prediv;
+
+ s3c24xx_register_baseclocks(xtal);
+ s3c2443_setup_clocks();
s3c2443_clk_initparents();
for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
@@ -1056,7 +1072,6 @@ void __init s3c2443_init_clocks(int xtal)
}
clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-
clk_usb_bus.parent = &clk_usb_bus_host;
/* ensure usb bus clock is within correct rate of 48MHz */
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index bbeddf9ddcb..ce2ec329893 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -81,10 +81,9 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
* machine specific initialisation.
*/
-void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2443_map_io(void)
{
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
- iotable_init(mach_desc, mach_size);
}
/* need to register class before we actually register the device, and
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 31656c33e05..10c1dd3cd46 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -57,6 +57,14 @@ config S3C_BOOT_ERROR_RESET
Say y here to use the watchdog to reset the system if the
kernel decompressor detects an error during decompression.
+config S3C_BOOT_UART_FORCE_FIFO
+ bool "Force UART FIFO on during boot process"
+ depends on PLAT_S3C
+ default y
+ help
+ Say Y here to force the UART FIFOs on during the kernel
+ uncompressor
+
comment "Power management"
config S3C2410_PM_DEBUG
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index f03d7b35ba3..a2fe3c77564 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -1,3 +1,17 @@
-# dummy makefile, currently just including asm/arm/plat-s3c/include/plat
+# arch/arm/plat-s3c/Makefile
+#
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
-obj-n := dummy.o
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for all Samsung SoCs
+
+obj-y += init.o
+obj-y += time.o
+obj-y += clock.o
+obj-y += pwm-clock.o \ No newline at end of file
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
new file mode 100644
index 00000000000..da7ac07c7a0
--- /dev/null
+++ b/arch/arm/plat-s3c/clock.c
@@ -0,0 +1,359 @@
+/* linux/arch/arm/plat-s3c24xx/clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Core clock control support
+ *
+ * Based on, and code from linux/arch/arm/mach-versatile/clock.c
+ **
+ ** Copyright (C) 2004 ARM Limited.
+ ** Written by Deep Blue Solutions Limited.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/* clock information */
+
+static LIST_HEAD(clocks);
+
+/* We originally used an mutex here, but some contexts (see resume)
+ * are calling functions such as clk_set_parent() with IRQs disabled
+ * causing an BUG to be triggered.
+ */
+DEFINE_SPINLOCK(clocks_lock);
+
+/* enable and disable calls for use with the clk struct */
+
+static int clk_null_enable(struct clk *clk, int enable)
+{
+ return 0;
+}
+
+/* Clock API calls */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *p;
+ struct clk *clk = ERR_PTR(-ENOENT);
+ int idno;
+
+ if (dev == NULL || dev->bus != &platform_bus_type)
+ idno = -1;
+ else
+ idno = to_platform_device(dev)->id;
+
+ spin_lock(&clocks_lock);
+
+ list_for_each_entry(p, &clocks, list) {
+ if (p->id == idno &&
+ strcmp(id, p->name) == 0 &&
+ try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+
+ /* check for the case where a device was supplied, but the
+ * clock that was being searched for is not device specific */
+
+ if (IS_ERR(clk)) {
+ list_for_each_entry(p, &clocks, list) {
+ if (p->id == -1 && strcmp(id, p->name) == 0 &&
+ try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ }
+
+ spin_unlock(&clocks_lock);
+ return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+ module_put(clk->owner);
+}
+
+int clk_enable(struct clk *clk)
+{
+ if (IS_ERR(clk) || clk == NULL)
+ return -EINVAL;
+
+ clk_enable(clk->parent);
+
+ spin_lock(&clocks_lock);
+
+ if ((clk->usage++) == 0)
+ (clk->enable)(clk, 1);
+
+ spin_unlock(&clocks_lock);
+ return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+ if (IS_ERR(clk) || clk == NULL)
+ return;
+
+ spin_lock(&clocks_lock);
+
+ if ((--clk->usage) == 0)
+ (clk->enable)(clk, 0);
+
+ spin_unlock(&clocks_lock);
+ clk_disable(clk->parent);
+}
+
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (IS_ERR(clk))
+ return 0;
+
+ if (clk->rate != 0)
+ return clk->rate;
+
+ if (clk->get_rate != NULL)
+ return (clk->get_rate)(clk);
+
+ if (clk->parent != NULL)
+ return clk_get_rate(clk->parent);
+
+ return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (!IS_ERR(clk) && clk->round_rate)
+ return (clk->round_rate)(clk, rate);
+
+ return rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret;
+
+ if (IS_ERR(clk))
+ return -EINVAL;
+
+ /* We do not default just do a clk->rate = rate as
+ * the clock may have been made this way by choice.
+ */
+
+ WARN_ON(clk->set_rate == NULL);
+
+ if (clk->set_rate == NULL)
+ return -EINVAL;
+
+ spin_lock(&clocks_lock);
+ ret = (clk->set_rate)(clk, rate);
+ spin_unlock(&clocks_lock);
+
+ return ret;
+}
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = 0;
+
+ if (IS_ERR(clk))
+ return -EINVAL;
+
+ spin_lock(&clocks_lock);
+
+ if (clk->set_parent)
+ ret = (clk->set_parent)(clk, parent);
+
+ spin_unlock(&clocks_lock);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(clk_get);
+EXPORT_SYMBOL(clk_put);
+EXPORT_SYMBOL(clk_enable);
+EXPORT_SYMBOL(clk_disable);
+EXPORT_SYMBOL(clk_get_rate);
+EXPORT_SYMBOL(clk_round_rate);
+EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
+
+/* base clocks */
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+ clk->rate = rate;
+ return 0;
+}
+
+struct clk clk_xtal = {
+ .name = "xtal",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+};
+
+struct clk clk_mpll = {
+ .name = "mpll",
+ .id = -1,
+ .set_rate = clk_default_setrate,
+};
+
+struct clk clk_upll = {
+ .name = "upll",
+ .id = -1,
+ .parent = NULL,
+ .ctrlbit = 0,
+};
+
+struct clk clk_f = {
+ .name = "fclk",
+ .id = -1,
+ .rate = 0,
+ .parent = &clk_mpll,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+};
+
+struct clk clk_h = {
+ .name = "hclk",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+};
+
+struct clk clk_p = {
+ .name = "pclk",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+};
+
+struct clk clk_usb_bus = {
+ .name = "usb-bus",
+ .id = -1,
+ .rate = 0,
+ .parent = &clk_upll,
+};
+
+
+
+struct clk s3c24xx_uclk = {
+ .name = "uclk",
+ .id = -1,
+};
+
+/* initialise the clock system */
+
+int s3c24xx_register_clock(struct clk *clk)
+{
+ clk->owner = THIS_MODULE;
+
+ if (clk->enable == NULL)
+ clk->enable = clk_null_enable;
+
+ /* add to the list of available clocks */
+
+ /* Quick check to see if this clock has already been registered. */
+ BUG_ON(clk->list.prev != clk->list.next);
+
+ spin_lock(&clocks_lock);
+ list_add(&clk->list, &clocks);
+ spin_unlock(&clocks_lock);
+
+ return 0;
+}
+
+int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
+{
+ int fails = 0;
+
+ for (; nr_clks > 0; nr_clks--, clks++) {
+ if (s3c24xx_register_clock(*clks) < 0)
+ fails++;
+ }
+
+ return fails;
+}
+
+/* initalise all the clocks */
+
+int __init s3c24xx_register_baseclocks(unsigned long xtal)
+{
+ printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+
+ clk_xtal.rate = xtal;
+
+ /* register our clocks */
+
+ if (s3c24xx_register_clock(&clk_xtal) < 0)
+ printk(KERN_ERR "failed to register master xtal\n");
+
+ if (s3c24xx_register_clock(&clk_mpll) < 0)
+ printk(KERN_ERR "failed to register mpll clock\n");
+
+ if (s3c24xx_register_clock(&clk_upll) < 0)
+ printk(KERN_ERR "failed to register upll clock\n");
+
+ if (s3c24xx_register_clock(&clk_f) < 0)
+ printk(KERN_ERR "failed to register cpu fclk\n");
+
+ if (s3c24xx_register_clock(&clk_h) < 0)
+ printk(KERN_ERR "failed to register cpu hclk\n");
+
+ if (s3c24xx_register_clock(&clk_p) < 0)
+ printk(KERN_ERR "failed to register cpu pclk\n");
+
+ return 0;
+}
+
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/plat-s3c/include/mach/io.h
new file mode 100644
index 00000000000..10d28d66ace
--- /dev/null
+++ b/arch/arm/plat-s3c/include/mach/io.h
@@ -0,0 +1,18 @@
+/* arch/arm/plat-s3c/include/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for plat-s3c based systems, such as S3C24A0
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/plat-s3c/include/mach/timex.h
index 2a425ed0a7e..2a425ed0a7e 100644
--- a/arch/arm/mach-s3c2410/include/mach/timex.h
+++ b/arch/arm/plat-s3c/include/mach/timex.h
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/plat-s3c/include/mach/vmalloc.h
index 315b0078a34..bfd2ca6e307 100644
--- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h
+++ b/arch/arm/plat-s3c/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
+/* arch/arm/plat-s3c/include/mach/vmalloc.h
*
* from arch/arm/mach-iop3xx/include/mach/vmalloc.h
*
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
new file mode 100644
index 00000000000..43df2a404b0
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c/include/plat/adc.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simnte.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX ADC driver information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ADC_H
+#define __ASM_PLAT_ADC_H __FILE__
+
+struct s3c_adc_client;
+
+extern int s3c_adc_start(struct s3c_adc_client *client,
+ unsigned int channel, unsigned int nr_samples);
+
+extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
+ void (*select)(unsigned selected),
+ void (*conv)(unsigned d0, unsigned d1),
+ unsigned int is_ts);
+
+extern void s3c_adc_release(struct s3c_adc_client *client);
+
+#endif /* __ASM_PLAT_ADC_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h
index 235b753cd87..d871609738f 100644
--- a/arch/arm/plat-s3c24xx/include/plat/clock.h
+++ b/arch/arm/plat-s3c/include/plat/clock.h
@@ -1,5 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/clock.h
- * linux/arch/arm/mach-s3c2410/clock.h
+/* linux/arch/arm/plat-s3c/include/plat/clock.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
@@ -10,6 +9,8 @@
* published by the Free Software Foundation.
*/
+#include <linux/spinlock.h>
+
struct clk {
struct list_head list;
struct module *owner;
@@ -51,14 +52,21 @@ extern struct clk clk_xtal;
* Please DO NOT use these outside of arch/arm/mach-s3c2410
*/
-extern struct mutex clocks_mutex;
+extern spinlock_t clocks_lock;
extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
extern int s3c24xx_register_clock(struct clk *clk);
extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
-extern int s3c24xx_setup_clocks(unsigned long xtal,
- unsigned long fclk,
- unsigned long hclk,
- unsigned long pclk);
+extern int s3c24xx_register_baseclocks(unsigned long xtal);
+
+extern void s3c24xx_setup_clocks(unsigned long fclk,
+ unsigned long hclk,
+ unsigned long pclk);
+
+extern void s3c2410_setup_clocks(void);
+extern void s3c2412_setup_clocks(void);
+extern void s3c244x_setup_clocks(void);
+extern void s3c2443_setup_clocks(void);
+
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
new file mode 100644
index 00000000000..c86a13307e9
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -0,0 +1,94 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - driver and board
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/cpufreq.h>
+
+struct s3c_cpufreq_info;
+struct s3c_cpufreq_board;
+struct s3c_iotimings;
+
+struct s3c_freq {
+ unsigned long fclk;
+ unsigned long armclk;
+ unsigned long hclk_tns; /* in 10ths of ns */
+ unsigned long hclk;
+ unsigned long pclk;
+};
+
+/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+ * notification can use this information that is not provided by just
+ * having the core frequency alone.
+ */
+
+struct s3c_cpufreq_freqs {
+ struct cpufreq_freqs freqs;
+ struct s3c_freq old;
+ struct s3c_freq new;
+};
+
+#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
+
+struct s3c_clkdivs {
+ int p_divisor; /* fclk / pclk */
+ int h_divisor; /* fclk / hclk */
+ int arm_divisor; /* not all cpus have this. */
+ unsigned char dvs; /* using dvs mode to arm. */
+};
+
+#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
+
+struct s3c_pllval {
+ unsigned long freq;
+ unsigned long pll_reg;
+};
+
+struct s3c_cpufreq_config {
+ struct s3c_freq freq;
+ struct s3c_pllval pll;
+ struct s3c_clkdivs divs;
+ struct s3c_cpufreq_info *info; /* for core, not drivers */
+ struct s3c_cpufreq_board *board;
+};
+
+/* s3c_cpufreq_board
+ *
+ * per-board configuraton information, such as memory refresh and
+ * how to initialise IO timings.
+ */
+struct s3c_cpufreq_board {
+ unsigned int refresh; /* refresh period in ns */
+ unsigned int auto_io:1; /* automatically init io timings. */
+ unsigned int need_io:1; /* set if needs io timing support. */
+
+ /* any non-zero field in here is taken as an upper limit. */
+ struct s3c_freq max; /* frequency limits */
+};
+
+/* Things depending on frequency scaling. */
+#ifdef CONFIG_CPU_FREQ_S3C
+#define __init_or_cpufreq
+#else
+#define __init_or_cpufreq __init
+#endif
+
+/* Board functions */
+
+#ifdef CONFIG_CPU_FREQ_S3C
+extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
+#else
+
+static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+ return 0;
+}
+#endif /* CONFIG_CPU_FREQ_S3C */
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index 23e420e8bd5..011157ea871 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/cpu.h
+/* linux/arch/arm/plat-s3c/include/plat/cpu.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -18,7 +18,7 @@
#define MHZ (1000*1000)
#endif
-#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
+#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
/* forward declaration */
struct s3c24xx_uart_resources;
@@ -26,6 +26,21 @@ struct platform_device;
struct s3c2410_uartcfg;
struct map_desc;
+/* per-cpu initialisation function table. */
+
+struct cpu_table {
+ unsigned long idcode;
+ unsigned long idmask;
+ void (*map_io)(void);
+ void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
+ void (*init_clocks)(int xtal);
+ int (*init)(void);
+ const char *name;
+};
+
+extern void s3c_init_cpu(unsigned long idcode,
+ struct cpu_table *cpus, unsigned int cputab_size);
+
/* core initialisation functions */
extern void s3c24xx_init_irq(void);
diff --git a/arch/arm/plat-s3c24xx/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index badaac9d64a..badaac9d64a 100644
--- a/arch/arm/plat-s3c24xx/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-irqtype.h b/arch/arm/plat-s3c/include/plat/regs-irqtype.h
new file mode 100644
index 00000000000..c63cd3fc5ad
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-irqtype.h
@@ -0,0 +1,21 @@
+/* arch/arm/plat-s3c/include/plat/regs-irqtype.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C - IRQ detection types.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including
+ * the S3C64XX
+*/
+#define S3C2410_EXTINT_LOWLEV (0x00)
+#define S3C2410_EXTINT_HILEV (0x01)
+#define S3C2410_EXTINT_FALLEDGE (0x02)
+#define S3C2410_EXTINT_RISEEDGE (0x04)
+#define S3C2410_EXTINT_BOTHEDGE (0x06)
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
index 8a8a927292e..2c39a309aeb 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
@@ -139,6 +139,28 @@ static void arch_decomp_error(const char *x)
static void error(char *err);
+#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
+static inline void arch_enable_uart_fifo(void)
+{
+ u32 fifocon = uart_rd(S3C2410_UFCON);
+
+ if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
+ fifocon |= S3C2410_UFCON_RESETBOTH;
+ uart_wr(S3C2410_UFCON, fifocon);
+
+ /* wait for fifo reset to complete */
+ while (1) {
+ fifocon = uart_rd(S3C2410_UFCON);
+ if (!(fifocon & S3C2410_UFCON_RESETBOTH))
+ break;
+ }
+ }
+}
+#else
+#define arch_enable_uart_fifo() do { } while(0)
+#endif
+
+
static void
arch_decomp_setup(void)
{
@@ -149,6 +171,12 @@ arch_decomp_setup(void)
arch_detect_cpu();
arch_decomp_wdog_start();
+
+ /* Enable the UART FIFOs if they where not enabled and our
+ * configuration says we should turn them on.
+ */
+
+ arch_enable_uart_fifo();
}
diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-s3c/init.c
new file mode 100644
index 00000000000..85f086ee930
--- /dev/null
+++ b/arch/arm/plat-s3c/init.c
@@ -0,0 +1,161 @@
+/* linux/arch/arm/plat-s3c/init.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series CPU initialisation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/regs-serial.h>
+
+static struct cpu_table *cpu;
+
+static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
+ struct cpu_table *tab,
+ unsigned int count)
+{
+ for (; count != 0; count--, tab++) {
+ if ((idcode & tab->idmask) == tab->idcode)
+ return tab;
+ }
+
+ return NULL;
+}
+
+void __init s3c_init_cpu(unsigned long idcode,
+ struct cpu_table *cputab, unsigned int cputab_size)
+{
+ cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
+
+ if (cpu == NULL) {
+ printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
+ panic("Unknown S3C24XX CPU");
+ }
+
+ printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+
+ if (cpu->map_io == NULL || cpu->init == NULL) {
+ printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
+ panic("Unsupported Samsung CPU");
+ }
+
+ cpu->map_io();
+}
+
+/* s3c24xx_init_clocks
+ *
+ * Initialise the clock subsystem and associated information from the
+ * given master crystal value.
+ *
+ * xtal = 0 -> use default PLL crystal value (normally 12MHz)
+ * != 0 -> PLL crystal value in Hz
+*/
+
+void __init s3c24xx_init_clocks(int xtal)
+{
+ if (xtal == 0)
+ xtal = 12*1000*1000;
+
+ if (cpu == NULL)
+ panic("s3c24xx_init_clocks: no cpu setup?\n");
+
+ if (cpu->init_clocks == NULL)
+ panic("s3c24xx_init_clocks: cpu has no clock init\n");
+ else
+ (cpu->init_clocks)(xtal);
+}
+
+/* uart management */
+
+static int nr_uarts __initdata = 0;
+
+static struct s3c2410_uartcfg uart_cfgs[3];
+
+/* s3c24xx_init_uartdevs
+ *
+ * copy the specified platform data and configuration into our central
+ * set of devices, before the data is thrown away after the init process.
+ *
+ * This also fills in the array passed to the serial driver for the
+ * early initialisation of the console.
+*/
+
+void __init s3c24xx_init_uartdevs(char *name,
+ struct s3c24xx_uart_resources *res,
+ struct s3c2410_uartcfg *cfg, int no)
+{
+ struct platform_device *platdev;
+ struct s3c2410_uartcfg *cfgptr = uart_cfgs;
+ struct s3c24xx_uart_resources *resp;
+ int uart;
+
+ memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
+
+ for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
+ platdev = s3c24xx_uart_src[cfgptr->hwport];
+
+ resp = res + cfgptr->hwport;
+
+ s3c24xx_uart_devs[uart] = platdev;
+
+ platdev->name = name;
+ platdev->resource = resp->resources;
+ platdev->num_resources = resp->nr_resources;
+
+ platdev->dev.platform_data = cfgptr;
+ }
+
+ nr_uarts = no;
+}
+
+void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ if (cpu == NULL)
+ return;
+
+ if (cpu->init_uarts == NULL) {
+ printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
+ } else
+ (cpu->init_uarts)(cfg, no);
+}
+
+static int __init s3c_arch_init(void)
+{
+ int ret;
+
+ // do the correct init for cpu
+
+ if (cpu == NULL)
+ panic("s3c_arch_init: NULL cpu\n");
+
+ ret = (cpu->init)();
+ if (ret != 0)
+ return ret;
+
+ ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
+ return ret;
+}
+
+arch_initcall(s3c_arch_init);
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c/pwm-clock.c
index 3fad68a1e6b..e07d82891a9 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c/pwm-clock.c
@@ -73,11 +73,13 @@
* tclk -------------------------/
*/
-static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
+static struct clk clk_timer_scaler[];
+
+static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
{
unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
- if (clk->id == 1) {
+ if (clk == &clk_timer_scaler[1]) {
tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
} else {
@@ -87,18 +89,61 @@ static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
return clk_get_rate(clk->parent) / (tcfg0 + 1);
}
-/* TODO - add set rate calls. */
+static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long divisor = parent_rate / rate;
+
+ if (divisor > 256)
+ divisor = 256;
+ else if (divisor < 2)
+ divisor = 2;
+
+ return parent_rate / divisor;
+}
+
+static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
+ unsigned long tcfg0;
+ unsigned long divisor;
+ unsigned long flags;
+
+ divisor = clk_get_rate(clk->parent) / round;
+ divisor--;
+
+ local_irq_save(flags);
+ tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+ if (clk == &clk_timer_scaler[1]) {
+ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
+ tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
+ } else {
+ tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
+ tcfg0 |= divisor;
+ }
+
+ __raw_writel(tcfg0, S3C2410_TCFG0);
+ local_irq_restore(flags);
+
+ return 0;
+}
static struct clk clk_timer_scaler[] = {
[0] = {
.name = "pwm-scaler0",
.id = -1,
- .get_rate = clk_pwm_scaler_getrate,
+ .get_rate = clk_pwm_scaler_get_rate,
+ .set_rate = clk_pwm_scaler_set_rate,
+ .round_rate = clk_pwm_scaler_round_rate,
},
[1] = {
.name = "pwm-scaler1",
.id = -1,
- .get_rate = clk_pwm_scaler_getrate,
+ .get_rate = clk_pwm_scaler_get_rate,
+ .set_rate = clk_pwm_scaler_set_rate,
+ .round_rate = clk_pwm_scaler_round_rate,
},
};
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c/time.c
index c51916236ac..c6861a05a29 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c/time.c
@@ -101,7 +101,7 @@ static unsigned long s3c2410_gettimeoffset (void)
/* work out how many ticks have gone since last timer interrupt */
- tval = __raw_readl(S3C2410_TCNTO(4));
+ tval = __raw_readl(S3C2410_TCNTO(4));
tdone = timer_startval - tval;
/* check to see if there is an interrupt pending */
@@ -144,7 +144,7 @@ static struct irqaction s3c2410_timer_irq = {
machine_is_bast() || \
machine_is_vr1000() || \
machine_is_anubis() || \
- machine_is_osiris() )
+ machine_is_osiris())
/*
* Set up timer interrupt, and return the current time in seconds.
@@ -216,7 +216,7 @@ static void s3c2410_timer_setup (void)
tcnt--;
- printk("timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
+ printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
/* check to see if timer is within 16bit range... */
@@ -247,7 +247,7 @@ static void s3c2410_timer_setup (void)
__raw_writel(tcon, S3C2410_TCON);
}
-static void __init s3c2410_timer_init (void)
+static void __init s3c2410_timer_init(void)
{
s3c2410_timer_setup();
setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 7fe28aaa08c..0e07de2c9a9 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -15,6 +15,19 @@ config PLAT_S3C24XX
if PLAT_S3C24XX
+# code that is shared between a number of the s3c24xx implementations
+
+config S3C2410_CLOCK
+ bool
+ help
+ Clock code for the S3C2410, and similar processors which
+ is currently includes the S3C2410, S3C2440, S3C2442.
+
+config S3C24XX_DCLK
+ bool
+ help
+ Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
+
config CPU_S3C244X
bool
depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
@@ -70,6 +83,29 @@ config S3C2410_DMA_DEBUG
Enable debugging output for the DMA code. This option sends info
to the kernel log, at priority KERN_DEBUG.
+config S3C24XX_ADC
+ bool "ADC common driver support"
+ help
+ Core support for the ADC block found in the S3C24XX SoC systems
+ for drivers such as the touchscreen and hwmon to use to share
+ this resource.
+
+# SPI default pin configuration code
+
+config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13
+ bool
+ help
+ SPI GPIO configuration code for BUS0 when connected to
+ GPE11, GPE12 and GPE13.
+
+config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
+ bool
+ help
+ SPI GPIO configuration code for BUS 1 when connected to
+ GPG5, GPG6 and GPG7.
+
+# common code for s3c24xx based machines, such as the SMDKs.
+
config MACH_SMDK
bool
help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index d82767b2b83..a8cfdefc29e 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -17,9 +17,8 @@ obj-y += irq.o
obj-y += devs.o
obj-y += gpio.o
obj-y += gpiolib.o
-obj-y += time.o
obj-y += clock.o
-obj-y += pwm-clock.o
+obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
# Architecture dependant builds
@@ -30,5 +29,15 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_HAVE_PWM) += pwm.o
+obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
+obj-$(CONFIG_S3C24XX_ADC) += adc.o
+
+# SPI gpio central GPIO functions
+
+obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o
+
+# machine common support
+
obj-$(CONFIG_MACH_SMDK) += common-smdk.o
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
new file mode 100644
index 00000000000..9a5c767e0a4
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -0,0 +1,372 @@
+/* arch/arm/plat-s3c24xx/adc.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * S3C24XX ADC device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <plat/regs-adc.h>
+#include <plat/adc.h>
+
+/* This driver is designed to control the usage of the ADC block between
+ * the touchscreen and any other drivers that may need to use it, such as
+ * the hwmon driver.
+ *
+ * Priority will be given to the touchscreen driver, but as this itself is
+ * rate limited it should not starve other requests which are processed in
+ * order that they are received.
+ *
+ * Each user registers to get a client block which uniquely identifies it
+ * and stores information such as the necessary functions to callback when
+ * action is required.
+ */
+
+struct s3c_adc_client {
+ struct platform_device *pdev;
+ struct list_head pend;
+
+ unsigned int nr_samples;
+ unsigned char is_ts;
+ unsigned char channel;
+
+ void (*select_cb)(unsigned selected);
+ void (*convert_cb)(unsigned val1, unsigned val2);
+};
+
+struct adc_device {
+ struct platform_device *pdev;
+ struct platform_device *owner;
+ struct clk *clk;
+ struct s3c_adc_client *cur;
+ struct s3c_adc_client *ts_pend;
+ void __iomem *regs;
+
+ unsigned int prescale;
+
+ int irq;
+};
+
+static struct adc_device *adc_dev;
+
+static LIST_HEAD(adc_pending);
+
+#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
+
+static inline void s3c_adc_convert(struct adc_device *adc)
+{
+ unsigned con = readl(adc->regs + S3C2410_ADCCON);
+
+ con |= S3C2410_ADCCON_ENABLE_START;
+ writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static inline void s3c_adc_select(struct adc_device *adc,
+ struct s3c_adc_client *client)
+{
+ unsigned con = readl(adc->regs + S3C2410_ADCCON);
+
+ client->select_cb(1);
+
+ con &= ~S3C2410_ADCCON_MUXMASK;
+ con &= ~S3C2410_ADCCON_STDBM;
+ con &= ~S3C2410_ADCCON_STARTMASK;
+
+ if (!client->is_ts)
+ con |= S3C2410_ADCCON_SELMUX(client->channel);
+
+ writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static void s3c_adc_dbgshow(struct adc_device *adc)
+{
+ adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
+ readl(adc->regs + S3C2410_ADCCON),
+ readl(adc->regs + S3C2410_ADCTSC),
+ readl(adc->regs + S3C2410_ADCDLY));
+}
+
+void s3c_adc_try(struct adc_device *adc)
+{
+ struct s3c_adc_client *next = adc->ts_pend;
+
+ if (!next && !list_empty(&adc_pending)) {
+ next = list_first_entry(&adc_pending,
+ struct s3c_adc_client, pend);
+ list_del(&next->pend);
+ } else
+ adc->ts_pend = NULL;
+
+ if (next) {
+ adc_dbg(adc, "new client is %p\n", next);
+ adc->cur = next;
+ s3c_adc_select(adc, next);
+ s3c_adc_convert(adc);
+ s3c_adc_dbgshow(adc);
+ }
+}
+
+int s3c_adc_start(struct s3c_adc_client *client,
+ unsigned int channel, unsigned int nr_samples)
+{
+ struct adc_device *adc = adc_dev;
+ unsigned long flags;
+
+ if (!adc) {
+ printk(KERN_ERR "%s: failed to find adc\n", __func__);
+ return -EINVAL;
+ }
+
+ if (client->is_ts && adc->ts_pend)
+ return -EAGAIN;
+
+ local_irq_save(flags);
+
+ client->channel = channel;
+ client->nr_samples = nr_samples;
+
+ if (client->is_ts)
+ adc->ts_pend = client;
+ else
+ list_add_tail(&client->pend, &adc_pending);
+
+ if (!adc->cur)
+ s3c_adc_try(adc);
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_start);
+
+static void s3c_adc_default_select(unsigned select)
+{
+}
+
+struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
+ void (*select)(unsigned int selected),
+ void (*conv)(unsigned d0, unsigned d1),
+ unsigned int is_ts)
+{
+ struct s3c_adc_client *client;
+
+ WARN_ON(!pdev);
+ WARN_ON(!conv);
+
+ if (!select)
+ select = s3c_adc_default_select;
+
+ if (!conv || !pdev)
+ return ERR_PTR(-EINVAL);
+
+ client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
+ if (!client) {
+ dev_err(&pdev->dev, "no memory for adc client\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ client->pdev = pdev;
+ client->is_ts = is_ts;
+ client->select_cb = select;
+ client->convert_cb = conv;
+
+ return client;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_register);
+
+void s3c_adc_release(struct s3c_adc_client *client)
+{
+ /* We should really check that nothing is in progress. */
+ kfree(client);
+}
+EXPORT_SYMBOL_GPL(s3c_adc_release);
+
+static irqreturn_t s3c_adc_irq(int irq, void *pw)
+{
+ struct adc_device *adc = pw;
+ struct s3c_adc_client *client = adc->cur;
+ unsigned long flags;
+ unsigned data0, data1;
+
+ if (!client) {
+ dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
+ return IRQ_HANDLED;
+ }
+
+ data0 = readl(adc->regs + S3C2410_ADCDAT0);
+ data1 = readl(adc->regs + S3C2410_ADCDAT1);
+ adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
+
+ (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
+
+ if (--client->nr_samples > 0) {
+ /* fire another conversion for this */
+
+ client->select_cb(1);
+ s3c_adc_convert(adc);
+ } else {
+ local_irq_save(flags);
+ (client->select_cb)(0);
+ adc->cur = NULL;
+
+ s3c_adc_try(adc);
+ local_irq_restore(flags);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int s3c_adc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct adc_device *adc;
+ struct resource *regs;
+ int ret;
+
+ adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
+ if (adc == NULL) {
+ dev_err(dev, "failed to allocate adc_device\n");
+ return -ENOMEM;
+ }
+
+ adc->pdev = pdev;
+ adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+
+ adc->irq = platform_get_irq(pdev, 1);
+ if (adc->irq <= 0) {
+ dev_err(dev, "failed to get adc irq\n");
+ ret = -ENOENT;
+ goto err_alloc;
+ }
+
+ ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc);
+ if (ret < 0) {
+ dev_err(dev, "failed to attach adc irq\n");
+ goto err_alloc;
+ }
+
+ adc->clk = clk_get(dev, "adc");
+ if (IS_ERR(adc->clk)) {
+ dev_err(dev, "failed to get adc clock\n");
+ ret = PTR_ERR(adc->clk);
+ goto err_irq;
+ }
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs) {
+ dev_err(dev, "failed to find registers\n");
+ ret = -ENXIO;
+ goto err_clk;
+ }
+
+ adc->regs = ioremap(regs->start, resource_size(regs));
+ if (!adc->regs) {
+ dev_err(dev, "failed to map registers\n");
+ ret = -ENXIO;
+ goto err_clk;
+ }
+
+ clk_enable(adc->clk);
+
+ writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
+ adc->regs + S3C2410_ADCCON);
+
+ dev_info(dev, "attached adc driver\n");
+
+ platform_set_drvdata(pdev, adc);
+ adc_dev = adc;
+
+ return 0;
+
+ err_clk:
+ clk_put(adc->clk);
+
+ err_irq:
+ free_irq(adc->irq, adc);
+
+ err_alloc:
+ kfree(adc);
+ return ret;
+}
+
+static int s3c_adc_remove(struct platform_device *pdev)
+{
+ struct adc_device *adc = platform_get_drvdata(pdev);
+
+ iounmap(adc->regs);
+ free_irq(adc->irq, adc);
+ clk_disable(adc->clk);
+ clk_put(adc->clk);
+ kfree(adc);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct adc_device *adc = platform_get_drvdata(pdev);
+ u32 con;
+
+ con = readl(adc->regs + S3C2410_ADCCON);
+ con |= S3C2410_ADCCON_STDBM;
+ writel(con, adc->regs + S3C2410_ADCCON);
+
+ clk_disable(adc->clk);
+
+ return 0;
+}
+
+static int s3c_adc_resume(struct platform_device *pdev)
+{
+ struct adc_device *adc = platform_get_drvdata(pdev);
+
+ clk_enable(adc->clk);
+
+ writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
+ adc->regs + S3C2410_ADCCON);
+
+ return 0;
+}
+
+#else
+#define s3c_adc_suspend NULL
+#define s3c_adc_resume NULL
+#endif
+
+static struct platform_driver s3c_adc_driver = {
+ .driver = {
+ .name = "s3c24xx-adc",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c_adc_probe,
+ .remove = __devexit_p(s3c_adc_remove),
+ .suspend = s3c_adc_suspend,
+ .resume = s3c_adc_resume,
+};
+
+static int __init adc_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&s3c_adc_driver);
+ if (ret)
+ printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
+
+ return ret;
+}
+
+arch_initcall(adc_init);
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
new file mode 100644
index 00000000000..5b75a797b5a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -0,0 +1,194 @@
+/* linux/arch/arm/plat-s3c24xx/clock-dclk.c
+ *
+ * Copyright (c) 2004,2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24XX - definitions for DCLK and CLKOUT registers
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/* clocks that could be registered by external code */
+
+static int s3c24xx_dclk_enable(struct clk *clk, int enable)
+{
+ unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+ if (enable)
+ dclkcon |= clk->ctrlbit;
+ else
+ dclkcon &= ~clk->ctrlbit;
+
+ __raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+ return 0;
+}
+
+static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
+{
+ unsigned long dclkcon;
+ unsigned int uclk;
+
+ if (parent == &clk_upll)
+ uclk = 1;
+ else if (parent == &clk_p)
+ uclk = 0;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+ if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
+ if (uclk)
+ dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
+ else
+ dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
+ } else {
+ if (uclk)
+ dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
+ else
+ dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
+ }
+
+ __raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+ return 0;
+}
+static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
+{
+ unsigned long div;
+
+ if ((rate == 0) || !clk->parent)
+ return 0;
+
+ div = clk_get_rate(clk->parent) / rate;
+ if (div < 2)
+ div = 2;
+ else if (div > 16)
+ div = 16;
+
+ return div;
+}
+
+static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long div = s3c24xx_calc_div(clk, rate);
+
+ if (div == 0)
+ return 0;
+
+ return clk_get_rate(clk->parent) / div;
+}
+
+static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
+
+ if (div == 0)
+ return -EINVAL;
+
+ if (clk == &s3c24xx_dclk0) {
+ mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
+ S3C2410_DCLKCON_DCLK0_CMP_MASK;
+ data = S3C2410_DCLKCON_DCLK0_DIV(div) |
+ S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
+ } else if (clk == &s3c24xx_dclk1) {
+ mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
+ S3C2410_DCLKCON_DCLK1_CMP_MASK;
+ data = S3C2410_DCLKCON_DCLK1_DIV(div) |
+ S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
+ } else
+ return -EINVAL;
+
+ clk->rate = clk_get_rate(clk->parent) / div;
+ __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
+ S3C24XX_DCLKCON);
+ return clk->rate;
+}
+static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
+{
+ unsigned long mask;
+ unsigned long source;
+
+ /* calculate the MISCCR setting for the clock */
+
+ if (parent == &clk_xtal)
+ source = S3C2410_MISCCR_CLK0_MPLL;
+ else if (parent == &clk_upll)
+ source = S3C2410_MISCCR_CLK0_UPLL;
+ else if (parent == &clk_f)
+ source = S3C2410_MISCCR_CLK0_FCLK;
+ else if (parent == &clk_h)
+ source = S3C2410_MISCCR_CLK0_HCLK;
+ else if (parent == &clk_p)
+ source = S3C2410_MISCCR_CLK0_PCLK;
+ else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
+ source = S3C2410_MISCCR_CLK0_DCLK0;
+ else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
+ source = S3C2410_MISCCR_CLK0_DCLK0;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ if (clk == &s3c24xx_clkout0)
+ mask = S3C2410_MISCCR_CLK0_MASK;
+ else {
+ source <<= 4;
+ mask = S3C2410_MISCCR_CLK1_MASK;
+ }
+
+ s3c2410_modify_misccr(mask, source);
+ return 0;
+}
+
+/* external clock definitions */
+
+struct clk s3c24xx_dclk0 = {
+ .name = "dclk0",
+ .id = -1,
+ .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
+ .enable = s3c24xx_dclk_enable,
+ .set_parent = s3c24xx_dclk_setparent,
+ .set_rate = s3c24xx_set_dclk_rate,
+ .round_rate = s3c24xx_round_dclk_rate,
+};
+
+struct clk s3c24xx_dclk1 = {
+ .name = "dclk1",
+ .id = -1,
+ .ctrlbit = S3C2410_DCLKCON_DCLK1EN,
+ .enable = s3c24xx_dclk_enable,
+ .set_parent = s3c24xx_dclk_setparent,
+ .set_rate = s3c24xx_set_dclk_rate,
+ .round_rate = s3c24xx_round_dclk_rate,
+};
+
+struct clk s3c24xx_clkout0 = {
+ .name = "clkout0",
+ .id = -1,
+ .set_parent = s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_clkout1 = {
+ .name = "clkout1",
+ .id = -1,
+ .set_parent = s3c24xx_clkout_setparent,
+};
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index a005ddbd9ef..8474d05274b 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -27,18 +27,8 @@
*/
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -47,490 +37,23 @@
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
+#include <plat/cpu-freq.h>
+
#include <plat/clock.h>
#include <plat/cpu.h>
-
-/* clock information */
-
-static LIST_HEAD(clocks);
-
-DEFINE_MUTEX(clocks_mutex);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
-{
- return 0;
-}
-
-/* Clock API calls */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p;
- struct clk *clk = ERR_PTR(-ENOENT);
- int idno;
-
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
- else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, list) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 &&
- try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
-
- /* check for the case where a device was supplied, but the
- * clock that was being searched for is not device specific */
-
- if (IS_ERR(clk)) {
- list_for_each_entry(p, &clocks, list) {
- if (p->id == -1 && strcmp(id, p->name) == 0 &&
- try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
- }
-
- mutex_unlock(&clocks_mutex);
- return clk;
-}
-
-void clk_put(struct clk *clk)
-{
- module_put(clk->owner);
-}
-
-int clk_enable(struct clk *clk)
-{
- if (IS_ERR(clk) || clk == NULL)
- return -EINVAL;
-
- clk_enable(clk->parent);
-
- mutex_lock(&clocks_mutex);
-
- if ((clk->usage++) == 0)
- (clk->enable)(clk, 1);
-
- mutex_unlock(&clocks_mutex);
- return 0;
-}
-
-void clk_disable(struct clk *clk)
-{
- if (IS_ERR(clk) || clk == NULL)
- return;
-
- mutex_lock(&clocks_mutex);
-
- if ((--clk->usage) == 0)
- (clk->enable)(clk, 0);
-
- mutex_unlock(&clocks_mutex);
- clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (IS_ERR(clk))
- return 0;
-
- if (clk->rate != 0)
- return clk->rate;
-
- if (clk->get_rate != NULL)
- return (clk->get_rate)(clk);
-
- if (clk->parent != NULL)
- return clk_get_rate(clk->parent);
-
- return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (!IS_ERR(clk) && clk->round_rate)
- return (clk->round_rate)(clk, rate);
-
- return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret;
-
- if (IS_ERR(clk))
- return -EINVAL;
-
- /* We do not default just do a clk->rate = rate as
- * the clock may have been made this way by choice.
- */
-
- WARN_ON(clk->set_rate == NULL);
-
- if (clk->set_rate == NULL)
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- ret = (clk->set_rate)(clk, rate);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = 0;
-
- if (IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
-
- if (clk->set_parent)
- ret = (clk->set_parent)(clk, parent);
-
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-
-EXPORT_SYMBOL(clk_get);
-EXPORT_SYMBOL(clk_put);
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
- clk->rate = rate;
- return 0;
-}
-
-struct clk clk_xtal = {
- .name = "xtal",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_mpll = {
- .name = "mpll",
- .id = -1,
- .set_rate = clk_default_setrate,
-};
-
-struct clk clk_upll = {
- .name = "upll",
- .id = -1,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_f = {
- .name = "fclk",
- .id = -1,
- .rate = 0,
- .parent = &clk_mpll,
- .ctrlbit = 0,
- .set_rate = clk_default_setrate,
-};
-
-struct clk clk_h = {
- .name = "hclk",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .set_rate = clk_default_setrate,
-};
-
-struct clk clk_p = {
- .name = "pclk",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .set_rate = clk_default_setrate,
-};
-
-struct clk clk_usb_bus = {
- .name = "usb-bus",
- .id = -1,
- .rate = 0,
- .parent = &clk_upll,
-};
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
- unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
- if (enable)
- dclkcon |= clk->ctrlbit;
- else
- dclkcon &= ~clk->ctrlbit;
-
- __raw_writel(dclkcon, S3C24XX_DCLKCON);
-
- return 0;
-}
-
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
- unsigned long dclkcon;
- unsigned int uclk;
-
- if (parent == &clk_upll)
- uclk = 1;
- else if (parent == &clk_p)
- uclk = 0;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
- if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
- if (uclk)
- dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
- else
- dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
- } else {
- if (uclk)
- dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
- else
- dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
- }
-
- __raw_writel(dclkcon, S3C24XX_DCLKCON);
-
- return 0;
-}
-
-static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
-{
- unsigned long div;
-
- if ((rate == 0) || !clk->parent)
- return 0;
-
- div = clk_get_rate(clk->parent) / rate;
- if (div < 2)
- div = 2;
- else if (div > 16)
- div = 16;
-
- return div;
-}
-
-static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long div = s3c24xx_calc_div(clk, rate);
-
- if (div == 0)
- return 0;
-
- return clk_get_rate(clk->parent) / div;
-}
-
-static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
-
- if (div == 0)
- return -EINVAL;
-
- if (clk == &s3c24xx_dclk0) {
- mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
- S3C2410_DCLKCON_DCLK0_CMP_MASK;
- data = S3C2410_DCLKCON_DCLK0_DIV(div) |
- S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
- } else if (clk == &s3c24xx_dclk1) {
- mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
- S3C2410_DCLKCON_DCLK1_CMP_MASK;
- data = S3C2410_DCLKCON_DCLK1_DIV(div) |
- S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
- } else
- return -EINVAL;
-
- clk->rate = clk_get_rate(clk->parent) / div;
- __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
- S3C24XX_DCLKCON);
- return clk->rate;
-}
-
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
- unsigned long mask;
- unsigned long source;
-
- /* calculate the MISCCR setting for the clock */
-
- if (parent == &clk_xtal)
- source = S3C2410_MISCCR_CLK0_MPLL;
- else if (parent == &clk_upll)
- source = S3C2410_MISCCR_CLK0_UPLL;
- else if (parent == &clk_f)
- source = S3C2410_MISCCR_CLK0_FCLK;
- else if (parent == &clk_h)
- source = S3C2410_MISCCR_CLK0_HCLK;
- else if (parent == &clk_p)
- source = S3C2410_MISCCR_CLK0_PCLK;
- else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
- source = S3C2410_MISCCR_CLK0_DCLK0;
- else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
- source = S3C2410_MISCCR_CLK0_DCLK0;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- if (clk == &s3c24xx_clkout0)
- mask = S3C2410_MISCCR_CLK0_MASK;
- else {
- source <<= 4;
- mask = S3C2410_MISCCR_CLK1_MASK;
- }
-
- s3c2410_modify_misccr(mask, source);
- return 0;
-}
-
-/* external clock definitions */
-
-struct clk s3c24xx_dclk0 = {
- .name = "dclk0",
- .id = -1,
- .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
- .enable = s3c24xx_dclk_enable,
- .set_parent = s3c24xx_dclk_setparent,
- .set_rate = s3c24xx_set_dclk_rate,
- .round_rate = s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_dclk1 = {
- .name = "dclk1",
- .id = -1,
- .ctrlbit = S3C2410_DCLKCON_DCLK1EN,
- .enable = s3c24xx_dclk_enable,
- .set_parent = s3c24xx_dclk_setparent,
- .set_rate = s3c24xx_set_dclk_rate,
- .round_rate = s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_clkout0 = {
- .name = "clkout0",
- .id = -1,
- .set_parent = s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout1 = {
- .name = "clkout1",
- .id = -1,
- .set_parent = s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_uclk = {
- .name = "uclk",
- .id = -1,
-};
-
-/* initialise the clock system */
-
-int s3c24xx_register_clock(struct clk *clk)
-{
- clk->owner = THIS_MODULE;
-
- if (clk->enable == NULL)
- clk->enable = clk_null_enable;
-
- /* add to the list of available clocks */
-
- mutex_lock(&clocks_mutex);
- list_add(&clk->list, &clocks);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-
-int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
-{
- int fails = 0;
-
- for (; nr_clks > 0; nr_clks--, clks++) {
- if (s3c24xx_register_clock(*clks) < 0)
- fails++;
- }
-
- return fails;
-}
+#include <plat/pll.h>
/* initalise all the clocks */
-int __init s3c24xx_setup_clocks(unsigned long xtal,
- unsigned long fclk,
- unsigned long hclk,
- unsigned long pclk)
+void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
+ unsigned long hclk,
+ unsigned long pclk)
{
- printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
-
- /* initialise the main system clocks */
-
- clk_xtal.rate = xtal;
- clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+ clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
+ clk_xtal.rate);
clk_mpll.rate = fclk;
clk_h.rate = hclk;
clk_p.rate = pclk;
clk_f.rate = fclk;
-
- /* assume uart clocks are correctly setup */
-
- /* register our clocks */
-
- if (s3c24xx_register_clock(&clk_xtal) < 0)
- printk(KERN_ERR "failed to register master xtal\n");
-
- if (s3c24xx_register_clock(&clk_mpll) < 0)
- printk(KERN_ERR "failed to register mpll clock\n");
-
- if (s3c24xx_register_clock(&clk_upll) < 0)
- printk(KERN_ERR "failed to register upll clock\n");
-
- if (s3c24xx_register_clock(&clk_f) < 0)
- printk(KERN_ERR "failed to register cpu fclk\n");
-
- if (s3c24xx_register_clock(&clk_h) < 0)
- printk(KERN_ERR "failed to register cpu hclk\n");
-
- if (s3c24xx_register_clock(&clk_p) < 0)
- printk(KERN_ERR "failed to register cpu pclk\n");
-
- return 0;
}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 22a329513c0..7a0f494c93b 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -55,16 +55,6 @@
#include <plat/s3c2442.h>
#include <plat/s3c2443.h>
-struct cpu_table {
- unsigned long idcode;
- unsigned long idmask;
- void (*map_io)(struct map_desc *mach_desc, int size);
- void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
- void (*init_clocks)(int xtal);
- int (*init)(void);
- const char *name;
-};
-
/* table of supported CPUs */
static const char name_s3c2400[] = "S3C2400";
@@ -169,23 +159,7 @@ static struct map_desc s3c_iodesc[] __initdata = {
IODESC_ENT(UART)
};
-static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode)
-{
- struct cpu_table *tab;
- int count;
-
- tab = cpu_ids;
- for (count = 0; count < ARRAY_SIZE(cpu_ids); count++, tab++) {
- if ((idcode & tab->idmask) == tab->idcode)
- return tab;
- }
-
- return NULL;
-}
-
-/* cpu information */
-
-static struct cpu_table *cpu;
+/* read cpu identificaiton code */
static unsigned long s3c24xx_read_idcode_v5(void)
{
@@ -231,6 +205,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
unsigned long idcode = 0x0;
/* initialise the io descriptors we need for initialisation */
+ iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
if (cpu_architecture() >= CPU_ARCH_ARMv5) {
@@ -239,117 +214,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
idcode = s3c24xx_read_idcode_v4();
}
- cpu = s3c_lookup_cpu(idcode);
-
- if (cpu == NULL) {
- printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
- panic("Unknown S3C24XX CPU");
- }
-
- printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
-
- if (cpu->map_io == NULL || cpu->init == NULL) {
- printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
- panic("Unsupported S3C24XX CPU");
- }
-
arm_pm_restart = s3c24xx_pm_restart;
- (cpu->map_io)(mach_desc, size);
-}
-
-/* s3c24xx_init_clocks
- *
- * Initialise the clock subsystem and associated information from the
- * given master crystal value.
- *
- * xtal = 0 -> use default PLL crystal value (normally 12MHz)
- * != 0 -> PLL crystal value in Hz
-*/
-
-void __init s3c24xx_init_clocks(int xtal)
-{
- if (xtal == 0)
- xtal = 12*1000*1000;
-
- if (cpu == NULL)
- panic("s3c24xx_init_clocks: no cpu setup?\n");
-
- if (cpu->init_clocks == NULL)
- panic("s3c24xx_init_clocks: cpu has no clock init\n");
- else
- (cpu->init_clocks)(xtal);
-}
-
-/* uart management */
-
-static int nr_uarts __initdata = 0;
-
-static struct s3c2410_uartcfg uart_cfgs[3];
-
-/* s3c24xx_init_uartdevs
- *
- * copy the specified platform data and configuration into our central
- * set of devices, before the data is thrown away after the init process.
- *
- * This also fills in the array passed to the serial driver for the
- * early initialisation of the console.
-*/
-
-void __init s3c24xx_init_uartdevs(char *name,
- struct s3c24xx_uart_resources *res,
- struct s3c2410_uartcfg *cfg, int no)
-{
- struct platform_device *platdev;
- struct s3c2410_uartcfg *cfgptr = uart_cfgs;
- struct s3c24xx_uart_resources *resp;
- int uart;
-
- memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
-
- for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
- platdev = s3c24xx_uart_src[cfgptr->hwport];
-
- resp = res + cfgptr->hwport;
-
- s3c24xx_uart_devs[uart] = platdev;
-
- platdev->name = name;
- platdev->resource = resp->resources;
- platdev->num_resources = resp->nr_resources;
-
- platdev->dev.platform_data = cfgptr;
- }
-
- nr_uarts = no;
+ s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
}
-
-void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- if (cpu == NULL)
- return;
-
- if (cpu->init_uarts == NULL) {
- printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
- } else
- (cpu->init_uarts)(cfg, no);
-}
-
-static int __init s3c_arch_init(void)
-{
- int ret;
-
- // do the correct init for cpu
-
- if (cpu == NULL)
- panic("s3c_arch_init: NULL cpu\n");
-
- ret = (cpu->init)();
- if (ret != 0)
- return ret;
-
- ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
- return ret;
-}
-
-arch_initcall(s3c_arch_init);
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index adf535aaf43..6a33dbc494f 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -372,12 +372,20 @@ static struct resource s3c_adc_resource[] = {
};
struct platform_device s3c_device_adc = {
- .name = "s3c2410-adc",
+ .name = "s3c24xx-adc",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_adc_resource),
.resource = s3c_adc_resource,
};
+/* HWMON */
+
+struct platform_device s3c_device_hwmon = {
+ .name = "s3c24xx-hwmon",
+ .id = -1,
+ .dev.parent = &s3c_device_adc.dev,
+};
+
/* SDI */
static struct resource s3c_sdi_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 3caec6bad3e..b07c2d0dd53 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -161,8 +161,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
.ngpio = 24,
.direction_input = s3c24xx_gpiolib_banka_input,
.direction_output = s3c24xx_gpiolib_banka_output,
- .set = s3c24xx_gpiolib_set,
- .get = s3c24xx_gpiolib_get,
},
},
[1] = {
@@ -172,10 +170,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
.owner = THIS_MODULE,
.label = "GPIOB",
.ngpio = 16,
- .direction_input = s3c24xx_gpiolib_input,
- .direction_output = s3c24xx_gpiolib_output,
- .set = s3c24xx_gpiolib_set,
- .get = s3c24xx_gpiolib_get,
},
},
[2] = {
@@ -185,10 +179,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
.owner = THIS_MODULE,
.label = "GPIOC",
.ngpio = 16,
- .direction_input = s3c24xx_gpiolib_input,
- .direction_output = s3c24xx_gpiolib_output,
- .set = s3c24xx_gpiolib_set,
- .get = s3c24xx_gpiolib_get,
},
},
[3] = {
@@ -198,10 +188,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
.owner = THIS_MODULE,
.label = "GPIOD",
.ngpio = 16,
- .direction_input = s3c24xx_gpiolib_input,
- .direction_output = s3c24xx_gpiolib_output,
- .set = s3c24xx_gpiolib_set,
- .get = s3c24xx_gpiolib_get,
},
},
[4] = {
@@ -211,10 +197,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
.label = "GPIOE",
.owner = THIS_MODULE,
.ngpio = 16,
- .direction_input = s3c24xx_gpiolib_input,
- .direction_output = s3c24xx_gpiolib_output,
- .set = s3c24xx_gpiolib_set,
- .get = s3c24xx_gpiolib_get,
},
},
[5] = {
@@ -224,10 +206,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
.owner = THIS_MODULE,
.label = "GPIOF",
.ngpio = 8,
- .direction_input = s3c24xx_gpiolib_input,
- .direction_output = s3c24xx_gpiolib_output,
- .set = s3c24xx_gpiolib_set,
- .get = s3c24xx_gpiolib_get,
},
},
[6] = {
@@ -237,21 +215,38 @@ static struct s3c24xx_gpio_chip gpios[] = {
.owner = THIS_MODULE,
.label = "GPIOG",
.ngpio = 10,
- .direction_input = s3c24xx_gpiolib_input,
- .direction_output = s3c24xx_gpiolib_output,
- .set = s3c24xx_gpiolib_set,
- .get = s3c24xx_gpiolib_get,
},
},
};
+static __init void s3c24xx_gpiolib_add(struct s3c24xx_gpio_chip *chip)
+{
+ struct gpio_chip *gc = &chip->chip;
+
+ BUG_ON(!chip->base);
+ BUG_ON(!gc->label);
+ BUG_ON(!gc->ngpio);
+
+ if (!gc->direction_input)
+ gc->direction_input = s3c24xx_gpiolib_input;
+ if (!gc->direction_output)
+ gc->direction_output = s3c24xx_gpiolib_output;
+ if (!gc->set)
+ gc->set = s3c24xx_gpiolib_set;
+ if (!gc->get)
+ gc->get = s3c24xx_gpiolib_get;
+
+ /* gpiochip_add() prints own failure message on error. */
+ gpiochip_add(gc);
+}
+
static __init int s3c24xx_gpiolib_init(void)
{
struct s3c24xx_gpio_chip *chip = gpios;
int gpn;
for (gpn = 0; gpn < ARRAY_SIZE(gpios); gpn++, chip++)
- gpiochip_add(&chip->chip);
+ s3c24xx_gpiolib_add(chip);
return 0;
}
diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h
new file mode 100644
index 00000000000..7ea8bffa7a9
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/pll.h
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C24xx - common pll registers and code
+ */
+
+#define S3C24XX_PLLCON_MDIVSHIFT 12
+#define S3C24XX_PLLCON_PDIVSHIFT 4
+#define S3C24XX_PLLCON_SDIVSHIFT 0
+#define S3C24XX_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1)
+#define S3C24XX_PLLCON_PDIVMASK ((1<<5)-1)
+#define S3C24XX_PLLCON_SDIVMASK 3
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk)
+{
+ unsigned int mdiv, pdiv, sdiv;
+ uint64_t fvco;
+
+ mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT;
+ pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT;
+ sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT;
+
+ mdiv &= S3C24XX_PLLCON_MDIVMASK;
+ pdiv &= S3C24XX_PLLCON_PDIVMASK;
+ sdiv &= S3C24XX_PLLCON_SDIVMASK;
+
+ fvco = (uint64_t)baseclk * (mdiv + 8);
+ do_div(fvco, (pdiv + 2) << sdiv);
+
+ return (unsigned int)fvco;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
index 3a5a16821af..b3feaea5c70 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
@@ -17,7 +17,7 @@
extern int s3c2400_init(void);
-extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
+extern void s3c2400_map_io(void);
extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index 3cd1ec677b3..a9ac9e29759 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -15,7 +15,7 @@
extern int s3c2410_init(void);
-extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
+extern void s3c2410_map_io(void);
extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
index 3ec97685e78..bb15d3b68be 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
@@ -14,7 +14,7 @@
extern int s3c2412_init(void);
-extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
+extern void s3c2412_map_io(void);
extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
index 11d83b5c84e..815b107ed89 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
@@ -16,7 +16,7 @@ struct s3c2410_uartcfg;
extern int s3c2443_init(void);
-extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
+extern void s3c2443_map_io(void);
extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 963f7a4f26f..0192ecdc144 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -62,6 +62,7 @@
#include <asm/mach/irq.h>
+#include <plat/regs-irqtype.h>
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 8efb57ad501..bc37cf49f97 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -76,11 +76,13 @@ static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_BANKCON4),
SAVE_ITEM(S3C2410_BANKCON5),
+#ifndef CONFIG_CPU_FREQ
SAVE_ITEM(S3C2410_CLKDIVN),
SAVE_ITEM(S3C2410_MPLLCON),
+ SAVE_ITEM(S3C2410_REFRESH),
+#endif
SAVE_ITEM(S3C2410_UPLLCON),
SAVE_ITEM(S3C2410_CLKSLOW),
- SAVE_ITEM(S3C2410_REFRESH),
};
static struct gpio_sleep {
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c
index 4e07943c1e2..4e07943c1e2 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index 7c09773ff9f..dde41f171af 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -31,7 +31,6 @@
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/mutex.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -102,13 +101,13 @@ static int s3c244x_clk_add(struct sys_device *sysdev)
if (clk_get_rate(clock_upll) > (94 * MHZ)) {
clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
- mutex_lock(&clocks_mutex);
+ spin_lock(&clocks_lock);
clkdivn = __raw_readl(S3C2410_CLKDIVN);
clkdivn |= S3C2440_CLKDIVN_UCLK;
__raw_writel(clkdivn, S3C2410_CLKDIVN);
- mutex_unlock(&clocks_mutex);
+ spin_unlock(&clocks_lock);
}
return 0;
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index c0344fac4a9..49436840305 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -29,6 +29,8 @@
#include <mach/hardware.h>
#include <asm/irq.h>
+#include <plat/cpu-freq.h>
+
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
@@ -42,6 +44,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
+#include <plat/pll.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
@@ -56,12 +59,11 @@ void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
}
-void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
+void __init s3c244x_map_io(void)
{
/* register our io-tables */
iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
- iotable_init(mach_desc, size);
/* rename any peripherals used differing from the s3c2410 */
@@ -71,17 +73,20 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
s3c_device_usbgadget.name = "s3c2440-usbgadget";
}
-void __init s3c244x_init_clocks(int xtal)
+void __init_or_cpufreq s3c244x_setup_clocks(void)
{
+ struct clk *xtal_clk;
unsigned long clkdiv;
unsigned long camdiv;
+ unsigned long xtal;
unsigned long hclk, fclk, pclk;
int hdiv = 1;
- /* now we've got our machine bits initialised, work out what
- * clocks we've got */
+ xtal_clk = clk_get(NULL, "xtal");
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
- fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
+ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
clkdiv = __raw_readl(S3C2410_CLKDIVN);
camdiv = __raw_readl(S3C2440_CAMDIVN);
@@ -107,18 +112,24 @@ void __init s3c244x_init_clocks(int xtal)
}
hclk = fclk / hdiv;
- pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1);
+ pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
/* print brief summary of clocks, etc */
printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+ s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c244x_init_clocks(int xtal)
+{
/* initialise the clocks here, to allow other things like the
* console to use them, and to add new ones after the initialisation
*/
- s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+ s3c24xx_register_baseclocks(xtal);
+ s3c244x_setup_clocks();
s3c2410_baseclk_add();
}
diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/s3c244x.h
index f8ed17676a3..6aab5eaae2b 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/s3c244x.h
@@ -12,7 +12,7 @@
#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-extern void s3c244x_map_io(struct map_desc *mach_desc, int size);
+extern void s3c244x_map_io(void);
extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
new file mode 100644
index 00000000000..8b403cbb53d
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+
+#include <mach/hardware.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
+ int enable)
+{
+ if (enable) {
+ s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
+ s3c2410_gpio_pullup(S3C2410_GPE11, 0);
+ s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+ } else {
+ s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPE11, 1);
+ s3c2410_gpio_pullup(S3C2410_GPE12, 1);
+ s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+ }
+}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
new file mode 100644
index 00000000000..8fccd4e549f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+
+#include <mach/hardware.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
+ int enable)
+{
+ if (enable) {
+ s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
+ s3c2410_gpio_pullup(S3C2410_GPG5, 0);
+ s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+ } else {
+ s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPG5, 1);
+ s3c2410_gpio_pullup(S3C2410_GPG6, 1);
+ s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+ }
+}
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1e219d3d035..ebeda832c8a 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -42,6 +42,7 @@
#include <linux/serial.h>
#include <linux/delay.h>
#include <linux/clk.h>
+#include <linux/cpufreq.h>
#include <asm/irq.h>
@@ -452,6 +453,8 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
+ ourport->pm_level = level;
+
switch (level) {
case 3:
if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
@@ -661,6 +664,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
ourport->clksrc = clksrc;
ourport->baudclk = clk;
+ ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
switch (termios->c_cflag & CSIZE) {
@@ -890,6 +894,93 @@ static inline int s3c24xx_serial_resetport(struct uart_port *port,
return (info->reset_port)(port, cfg);
}
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct s3c24xx_uart_port *port;
+ struct uart_port *uport;
+
+ port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
+ uport = &port->port;
+
+ /* check to see if port is enabled */
+
+ if (port->pm_level != 0)
+ return 0;
+
+ /* try and work out if the baudrate is changing, we can detect
+ * a change in rate, but we do not have support for detecting
+ * a disturbance in the clock-rate over the change.
+ */
+
+ if (IS_ERR(port->clk))
+ goto exit;
+
+ if (port->baudclk_rate == clk_get_rate(port->clk))
+ goto exit;
+
+ if (val == CPUFREQ_PRECHANGE) {
+ /* we should really shut the port down whilst the
+ * frequency change is in progress. */
+
+ } else if (val == CPUFREQ_POSTCHANGE) {
+ struct ktermios *termios;
+ struct tty_struct *tty;
+
+ if (uport->info == NULL) {
+ printk(KERN_WARNING "%s: info NULL\n", __func__);
+ goto exit;
+ }
+
+ tty = uport->info->port.tty;
+
+ if (tty == NULL) {
+ printk(KERN_WARNING "%s: tty is NULL\n", __func__);
+ goto exit;
+ }
+
+ termios = tty->termios;
+
+ if (termios == NULL) {
+ printk(KERN_WARNING "%s: no termios?\n", __func__);
+ goto exit;
+ }
+
+ s3c24xx_serial_set_termios(uport, termios, NULL);
+ }
+
+ exit:
+ return 0;
+}
+
+static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+ port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
+
+ return cpufreq_register_notifier(&port->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+ cpufreq_unregister_notifier(&port->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+ return 0;
+}
+
+static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+}
+#endif
+
/* s3c24xx_serial_init_port
*
* initialise a single serial port from the platform device given
@@ -1002,6 +1093,10 @@ int s3c24xx_serial_probe(struct platform_device *dev,
if (ret < 0)
printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
+ ret = s3c24xx_serial_cpufreq_register(ourport);
+ if (ret < 0)
+ dev_err(&dev->dev, "failed to add cpufreq notifier\n");
+
return 0;
probe_err:
@@ -1015,6 +1110,7 @@ int s3c24xx_serial_remove(struct platform_device *dev)
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
if (port) {
+ s3c24xx_serial_cpufreq_deregister(to_ourport(port));
device_remove_file(&dev->dev, &dev_attr_clock_source);
uart_remove_one_port(&s3c24xx_uart_drv, port);
}
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 5c92ebbe7d9..be263423205 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -33,12 +33,18 @@ struct s3c24xx_uart_info {
struct s3c24xx_uart_port {
unsigned char rx_claimed;
unsigned char tx_claimed;
+ unsigned int pm_level;
+ unsigned long baudclk_rate;
struct s3c24xx_uart_info *info;
struct s3c24xx_uart_clksrc *clksrc;
struct clk *clk;
struct clk *baudclk;
struct uart_port port;
+
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
};
/* conversion functions */