diff options
-rw-r--r-- | arch/arm/mach-pxa/Kconfig | 11 | ||||
-rw-r--r-- | arch/arm/mach-pxa/include/mach/palmtreo.h | 7 | ||||
-rw-r--r-- | arch/arm/mach-pxa/palmtreo.c | 161 | ||||
-rw-r--r-- | arch/arm/mm/mmu.c | 2 |
4 files changed, 180 insertions, 1 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index ce6519c000a..28f0260777a 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -425,6 +425,17 @@ config PALM_TREO bool depends on ARCH_PXA_PALM +config MACH_CENTRO + bool "Palm Centro 685 (GSM)" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + select PALM_TREO + help + Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) + smartphone. + config MACH_TREO680 bool "Palm Treo 680" default y diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h index 8cb0bca7f70..2d3f14e3be2 100644 --- a/arch/arm/mach-pxa/include/mach/palmtreo.h +++ b/arch/arm/mach-pxa/include/mach/palmtreo.h @@ -3,6 +3,7 @@ * * currently supported: * Palm Treo 680 (GSM) + * Palm Centro 685 (GSM) * * Author: Tomas Cech <sleep_walker@suse.cz> * @@ -45,6 +46,12 @@ #define GPIO_NR_TREO680_BT_EN 43 #endif /* CONFIG_MACH_TREO680 */ +/* Centro685 specific GPIOs */ +#define GPIO_NR_CENTRO_SD_POWER 21 +#define GPIO_NR_CENTRO_VIBRATE_EN 22 +#define GPIO_NR_CENTRO_KEYB_BL 33 +#define GPIO_NR_CENTRO_BT_EN 80 + /* Various addresses */ #define TREO_PHYS_RAM_START 0xa0000000 #define TREO_PHYS_IO_START 0x40000000 diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 5e66028d291..c071b60ebed 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -3,6 +3,7 @@ * * currently supported: * Palm Treo 680 (GSM) + * Palm Centro 685 (GSM) * * Author: Tomas Cech <sleep_walker@suse.cz> * @@ -160,6 +161,21 @@ static unsigned long treo680_pin_config[] __initdata = { }; #endif /* CONFIG_MACH_TREO680 */ +#ifdef CONFIG_MACH_CENTRO +static unsigned long centro685_pin_config[] __initdata = { + /* Bluetooth attached to BT UART*/ + MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW), /* power: LOW = off */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* MATRIX KEYPAD - different wake up source */ + GPIO100_KP_MKIN_0, + GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, +}; +#endif /* CONFIG_MACH_CENTRO */ + /****************************************************************************** * SD/MMC card controller ******************************************************************************/ @@ -172,6 +188,16 @@ static struct pxamci_platform_data treo680_mci_platform_data = { }; #endif /* CONFIG_MACH_TREO680 */ +#ifdef CONFIG_MACH_CENTRO +static struct pxamci_platform_data centro_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N, + .gpio_card_ro = -1, + .gpio_power = GPIO_NR_CENTRO_SD_POWER, + .gpio_power_invert = 1, +}; +#endif /* CONFIG_MACH_CENTRO */ + /****************************************************************************** * GPIO keyboard ******************************************************************************/ @@ -247,6 +273,78 @@ static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = { }; #endif /* CONFIG_MACH_TREO680 */ +#ifdef CONFIG_MACH_CENTRO +static unsigned int centro_matrix_keys[] = { + KEY(0, 0, KEY_F9), /* Home */ + KEY(0, 1, KEY_LEFT), + KEY(0, 2, KEY_LEFTCTRL), /* Alternate */ + KEY(0, 3, KEY_L), + KEY(0, 4, KEY_A), + KEY(0, 5, KEY_Q), + KEY(0, 6, KEY_P), + + KEY(1, 0, KEY_RIGHTCTRL), /* Menu */ + KEY(1, 1, KEY_RIGHT), + KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */ + KEY(1, 3, KEY_Z), + KEY(1, 4, KEY_S), + KEY(1, 5, KEY_W), + + KEY(2, 0, KEY_F1), /* Phone */ + KEY(2, 1, KEY_UP), + KEY(2, 2, KEY_0), + KEY(2, 3, KEY_X), + KEY(2, 4, KEY_D), + KEY(2, 5, KEY_E), + + KEY(3, 0, KEY_F10), /* Calendar */ + KEY(3, 1, KEY_DOWN), + KEY(3, 2, KEY_SPACE), + KEY(3, 3, KEY_C), + KEY(3, 4, KEY_F), + KEY(3, 5, KEY_R), + + KEY(4, 0, KEY_F12), /* Mail */ + KEY(4, 1, KEY_KPENTER), + KEY(4, 2, KEY_RIGHTALT), /* Alt */ + KEY(4, 3, KEY_V), + KEY(4, 4, KEY_G), + KEY(4, 5, KEY_T), + + KEY(5, 0, KEY_F8), /* Red/Off/Power */ + KEY(5, 1, KEY_PAGEUP), /* Side up */ + KEY(5, 2, KEY_DOT), + KEY(5, 3, KEY_B), + KEY(5, 4, KEY_H), + KEY(5, 5, KEY_Y), + + KEY(6, 0, KEY_TAB), /* Side Activate */ + KEY(6, 1, KEY_PAGEDOWN), /* Side down */ + KEY(6, 2, KEY_ENTER), + KEY(6, 3, KEY_N), + KEY(6, 4, KEY_J), + KEY(6, 5, KEY_U), + + KEY(7, 0, KEY_F6), /* Green/Call */ + KEY(7, 1, KEY_O), + KEY(7, 2, KEY_BACKSPACE), + KEY(7, 3, KEY_M), + KEY(7, 4, KEY_K), + KEY(7, 5, KEY_I), +}; + +static struct pxa27x_keypad_platform_data centro_keypad_platform_data = { + .matrix_key_rows = 8, + .matrix_key_cols = 7, + .matrix_key_map = centro_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys), + .direct_key_map = { KEY_CONNECT }, + .direct_key_num = 1, + + .debounce_interval = 30, +}; +#endif /* CONFIG_MACH_CENTRO */ + /****************************************************************************** * aSoC audio ******************************************************************************/ @@ -423,6 +521,40 @@ static struct platform_device treo680_leds = { }; #endif /* CONFIG_MACH_TREO680 */ +#ifdef CONFIG_MACH_CENTRO +static struct gpio_led centro_gpio_leds[] = { + { + .name = "centro:vibra:vibra", + .default_trigger = "none", + .gpio = GPIO_NR_CENTRO_VIBRATE_EN, + }, + { + .name = "centro:green:led", + .default_trigger = "mmc0", + .gpio = GPIO_NR_TREO_GREEN_LED, + }, + { + .name = "centro:white:keybbl", + .default_trigger = "none", + .active_low = 1, + .gpio = GPIO_NR_CENTRO_KEYB_BL, + }, +}; + +static struct gpio_led_platform_data centro_gpio_led_info = { + .leds = centro_gpio_leds, + .num_leds = ARRAY_SIZE(centro_gpio_leds), +}; + +static struct platform_device centro_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = ¢ro_gpio_led_info, + } +}; +#endif /* CONFIG_MACH_CENTRO */ + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -484,6 +616,12 @@ static struct platform_device *treo680_devices[] __initdata = { }; #endif /* CONFIG_MACH_TREO680 */ +#ifdef CONFIG_MACH_CENTRO +static struct platform_device *centro_devices[] __initdata = { + ¢ro_leds, +}; +#endif /* CONFIG_MACH_CENTRO */ + /* setup udc GPIOs initial state */ static void __init treo_udc_init(void) { @@ -549,3 +687,26 @@ MACHINE_START(TREO680, "Palm Treo 680") .init_machine = treo680_init, MACHINE_END #endif /* CONFIG_MACH_TREO680 */ + +#ifdef CONFIG_MACH_CENTRO +static void __init centro_init(void) +{ + treo_init(); + pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config)); + pxa_set_mci_info(¢ro_mci_platform_data); + + pxa_set_keypad_info(¢ro_keypad_platform_data); + + platform_add_devices(ARRAY_AND_SIZE(centro_devices)); +} + +MACHINE_START(CENTRO, "Palm Centro 685") + .phys_io = TREO_PHYS_IO_START, + .io_pg_offst = io_p2v(0x40000000), + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = centro_init, +MACHINE_END +#endif /* CONFIG_MACH_CENTRO */ diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index ea67be0223a..3e8556b16a9 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -881,7 +881,7 @@ void __init reserve_node_zero(pg_data_t *pgdat) BOOTMEM_EXCLUSIVE); } - if (machine_is_treo680()) { + if (machine_is_treo680() || machine_is_centro()) { reserve_bootmem_node(pgdat, 0xa0000000, 0x1000, BOOTMEM_EXCLUSIVE); reserve_bootmem_node(pgdat, 0xa2000000, 0x1000, |