aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/i2c/busses/i2c-ocores17
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/i2c/busses/i2c-bfin-twi.c59
-rw-r--r--drivers/i2c/busses/i2c-ocores.c5
-rw-r--r--drivers/i2c/busses/i2c-omap.c39
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c48
-rw-r--r--include/linux/i2c-ocores.h2
7 files changed, 118 insertions, 54 deletions
diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores
index cfcebb10d14..c269aaa2f26 100644
--- a/Documentation/i2c/busses/i2c-ocores
+++ b/Documentation/i2c/busses/i2c-ocores
@@ -20,6 +20,8 @@ platform_device with the base address and interrupt number. The
dev.platform_data of the device should also point to a struct
ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the
distance between registers and the input clock speed.
+There is also a possibility to attach a list of i2c_board_info which
+the i2c-ocores driver will add to the bus upon creation.
E.G. something like:
@@ -36,9 +38,24 @@ static struct resource ocores_resources[] = {
},
};
+/* optional board info */
+struct i2c_board_info ocores_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("tsc2003", 0x48),
+ .platform_data = &tsc2003_platform_data,
+ .irq = TSC_IRQ
+ },
+ {
+ I2C_BOARD_INFO("adv7180", 0x42 >> 1),
+ .irq = ADV_IRQ
+ }
+};
+
static struct ocores_i2c_platform_data myi2c_data = {
.regstep = 2, /* two bytes between registers */
.clock_khz = 50000, /* input clock of 50MHz */
+ .devices = ocores_i2c_board_info, /* optional table of devices */
+ .num_devices = ARRAY_SIZE(ocores_i2c_board_info), /* table size */
};
static struct platform_device myi2c = {
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index f1c6ca7e285..c8460fa9cfa 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -298,7 +298,7 @@ config I2C_BLACKFIN_TWI
config I2C_BLACKFIN_TWI_CLK_KHZ
int "Blackfin TWI I2C clock (kHz)"
depends on I2C_BLACKFIN_TWI
- range 10 400
+ range 21 400
default 50
help
The unit of the TWI clock is kHz.
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index fc548b3d002..26d8987e69b 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -104,9 +104,14 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | STOP);
else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
- iface->cur_msg+1 < iface->msg_num)
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | RSTART);
+ iface->cur_msg + 1 < iface->msg_num) {
+ if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
+ write_MASTER_CTL(iface,
+ read_MASTER_CTL(iface) | RSTART | MDIR);
+ else
+ write_MASTER_CTL(iface,
+ (read_MASTER_CTL(iface) | RSTART) & ~MDIR);
+ }
SSYNC();
/* Clear status */
write_INT_STAT(iface, XMTSERV);
@@ -134,9 +139,13 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
read_MASTER_CTL(iface) | STOP);
SSYNC();
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
- iface->cur_msg+1 < iface->msg_num) {
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | RSTART);
+ iface->cur_msg + 1 < iface->msg_num) {
+ if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
+ write_MASTER_CTL(iface,
+ read_MASTER_CTL(iface) | RSTART | MDIR);
+ else
+ write_MASTER_CTL(iface,
+ (read_MASTER_CTL(iface) | RSTART) & ~MDIR);
SSYNC();
}
/* Clear interrupt source */
@@ -196,8 +205,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
/* remove restart bit and enable master receive */
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~RSTART);
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | MEN | MDIR);
SSYNC();
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg+1 < iface->msg_num) {
@@ -222,18 +229,19 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
}
if (iface->pmsg[iface->cur_msg].len <= 255)
- write_MASTER_CTL(iface,
- iface->pmsg[iface->cur_msg].len << 6);
+ write_MASTER_CTL(iface,
+ (read_MASTER_CTL(iface) &
+ (~(0xff << 6))) |
+ (iface->pmsg[iface->cur_msg].len << 6));
else {
- write_MASTER_CTL(iface, 0xff << 6);
+ write_MASTER_CTL(iface,
+ (read_MASTER_CTL(iface) |
+ (0xff << 6)));
iface->manual_stop = 1;
}
/* remove restart bit and enable master receive */
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~RSTART);
- write_MASTER_CTL(iface, read_MASTER_CTL(iface) |
- MEN | ((iface->read_write == I2C_SMBUS_READ) ?
- MDIR : 0));
SSYNC();
} else {
iface->result = 1;
@@ -441,6 +449,16 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
}
iface->transPtr = data->block;
break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (read_write == I2C_SMBUS_READ) {
+ iface->readNum = data->block[0];
+ iface->cur_mode = TWI_I2C_MODE_COMBINED;
+ } else {
+ iface->writeNum = data->block[0];
+ iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+ }
+ iface->transPtr = (u8 *)&data->block[1];
+ break;
default:
return -1;
}
@@ -564,7 +582,7 @@ static u32 bfin_twi_functionality(struct i2c_adapter *adap)
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
- I2C_FUNC_I2C;
+ I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK;
}
static struct i2c_algorithm bfin_twi_algorithm = {
@@ -614,6 +632,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
struct i2c_adapter *p_adap;
struct resource *res;
int rc;
+ unsigned int clkhilow;
iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL);
if (!iface) {
@@ -675,10 +694,14 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
/* Set TWI internal clock as 10MHz */
write_CONTROL(iface, ((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F);
+ /*
+ * We will not end up with a CLKDIV=0 because no one will specify
+ * 20kHz SCL or less in Kconfig now. (5 * 1024 / 20 = 0x100)
+ */
+ clkhilow = 5 * 1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ;
+
/* Set Twi interface clock as specified */
- write_CLKDIV(iface, ((5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ)
- << 8) | ((5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ)
- & 0xFF));
+ write_CLKDIV(iface, (clkhilow << 8) | clkhilow);
/* Enable TWI */
write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index e5193bf7548..3542c6ba98f 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -216,6 +216,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
struct ocores_i2c_platform_data *pdata;
struct resource *res, *res2;
int ret;
+ int i;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -271,6 +272,10 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
goto add_adapter_failed;
}
+ /* add in known devices to the bus */
+ for (i = 0; i < pdata->num_devices; i++)
+ i2c_new_device(&i2c->adap, pdata->devices + i);
+
return 0;
add_adapter_failed:
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index ece0125a1ee..c73475dd0fb 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -333,8 +333,18 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
if (cpu_is_omap2430() || cpu_is_omap34xx()) {
- /* HSI2C controller internal clk rate should be 19.2 Mhz */
- internal_clk = 19200;
+ /*
+ * HSI2C controller internal clk rate should be 19.2 Mhz for
+ * HS and for all modes on 2430. On 34xx we can use lower rate
+ * to get longer filter period for better noise suppression.
+ * The filter is iclk (fclk for HS) period.
+ */
+ if (dev->speed > 400 || cpu_is_omap_2430())
+ internal_clk = 19200;
+ else if (dev->speed > 100)
+ internal_clk = 9600;
+ else
+ internal_clk = 4000;
fclk_rate = clk_get_rate(dev->fclk) / 1000;
/* Compute prescaler divisor */
@@ -343,17 +353,28 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
/* If configured for High Speed */
if (dev->speed > 400) {
+ unsigned long scl;
+
/* For first phase of HS mode */
- fsscll = internal_clk / (400 * 2) - 6;
- fssclh = internal_clk / (400 * 2) - 6;
+ scl = internal_clk / 400;
+ fsscll = scl - (scl / 3) - 7;
+ fssclh = (scl / 3) - 5;
/* For second phase of HS mode */
- hsscll = fclk_rate / (dev->speed * 2) - 6;
- hssclh = fclk_rate / (dev->speed * 2) - 6;
+ scl = fclk_rate / dev->speed;
+ hsscll = scl - (scl / 3) - 7;
+ hssclh = (scl / 3) - 5;
+ } else if (dev->speed > 100) {
+ unsigned long scl;
+
+ /* Fast mode */
+ scl = internal_clk / dev->speed;
+ fsscll = scl - (scl / 3) - 7;
+ fssclh = (scl / 3) - 5;
} else {
- /* To handle F/S modes */
- fsscll = internal_clk / (dev->speed * 2) - 6;
- fssclh = internal_clk / (dev->speed * 2) - 6;
+ /* Standard mode */
+ fsscll = internal_clk / (dev->speed * 2) - 7;
+ fssclh = internal_clk / (dev->speed * 2) - 5;
}
scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 1691ef0f1ee..079a312d36f 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -51,6 +51,11 @@ enum s3c24xx_i2c_state {
STATE_STOP
};
+enum s3c24xx_i2c_type {
+ TYPE_S3C2410,
+ TYPE_S3C2440,
+};
+
struct s3c24xx_i2c {
spinlock_t lock;
wait_queue_head_t wait;
@@ -88,8 +93,10 @@ struct s3c24xx_i2c {
static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
{
struct platform_device *pdev = to_platform_device(i2c->dev);
+ enum s3c24xx_i2c_type type;
- return !strcmp(pdev->name, "s3c2440-i2c");
+ type = platform_get_device_id(pdev)->driver_data;
+ return type == TYPE_S3C2440;
}
/* s3c24xx_i2c_master_complete
@@ -969,52 +976,41 @@ static int s3c24xx_i2c_resume(struct platform_device *dev)
/* device driver for platform bus bits */
-static struct platform_driver s3c2410_i2c_driver = {
- .probe = s3c24xx_i2c_probe,
- .remove = s3c24xx_i2c_remove,
- .suspend_late = s3c24xx_i2c_suspend_late,
- .resume = s3c24xx_i2c_resume,
- .driver = {
- .owner = THIS_MODULE,
- .name = "s3c2410-i2c",
- },
+static struct platform_device_id s3c24xx_driver_ids[] = {
+ {
+ .name = "s3c2410-i2c",
+ .driver_data = TYPE_S3C2410,
+ }, {
+ .name = "s3c2440-i2c",
+ .driver_data = TYPE_S3C2440,
+ }, { },
};
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
-static struct platform_driver s3c2440_i2c_driver = {
+static struct platform_driver s3c24xx_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
.suspend_late = s3c24xx_i2c_suspend_late,
.resume = s3c24xx_i2c_resume,
+ .id_table = s3c24xx_driver_ids,
.driver = {
.owner = THIS_MODULE,
- .name = "s3c2440-i2c",
+ .name = "s3c-i2c",
},
};
static int __init i2c_adap_s3c_init(void)
{
- int ret;
-
- ret = platform_driver_register(&s3c2410_i2c_driver);
- if (ret == 0) {
- ret = platform_driver_register(&s3c2440_i2c_driver);
- if (ret)
- platform_driver_unregister(&s3c2410_i2c_driver);
- }
-
- return ret;
+ return platform_driver_register(&s3c24xx_i2c_driver);
}
subsys_initcall(i2c_adap_s3c_init);
static void __exit i2c_adap_s3c_exit(void)
{
- platform_driver_unregister(&s3c2410_i2c_driver);
- platform_driver_unregister(&s3c2440_i2c_driver);
+ platform_driver_unregister(&s3c24xx_i2c_driver);
}
module_exit(i2c_adap_s3c_exit);
MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c2410-i2c");
-MODULE_ALIAS("platform:s3c2440-i2c");
diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h
index 8ed591b0887..4d5e57ff661 100644
--- a/include/linux/i2c-ocores.h
+++ b/include/linux/i2c-ocores.h
@@ -14,6 +14,8 @@
struct ocores_i2c_platform_data {
u32 regstep; /* distance between registers */
u32 clock_khz; /* input clock in kHz */
+ u8 num_devices; /* number of devices in the devices list */
+ struct i2c_board_info const *devices; /* devices connected to the bus */
};
#endif /* _LINUX_I2C_OCORES_H */