aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/sky2.c88
-rw-r--r--drivers/net/sky2.h3
2 files changed, 62 insertions, 29 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 9b16c2a899e..16a99f1ed17 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -304,7 +304,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
- if (sky2->autoneg == AUTONEG_ENABLE && hw->chip_id != CHIP_ID_YUKON_XL) {
+ if (sky2->autoneg == AUTONEG_ENABLE &&
+ (hw->chip_id != CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
@@ -332,7 +333,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
if (sky2->autoneg == AUTONEG_ENABLE &&
- hw->chip_id == CHIP_ID_YUKON_XL) {
+ (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
ctrl &= ~PHY_M_PC_DSC_MSK;
ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
}
@@ -448,10 +449,11 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
/* set LED Function Control register */
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
- PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
- PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
- PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
+ PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
+ PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
+ PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
/* set Polarity Control register */
gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
@@ -465,6 +467,25 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
/* restore page register */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
break;
+ case CHIP_ID_YUKON_EC_U:
+ pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+
+ /* select page 3 to access LED control register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+
+ /* set LED Function Control register */
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
+ PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
+ PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
+ PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
+
+ /* set Blink Rate in LED Timer Control Register */
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK,
+ ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
+ /* restore page register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ break;
default:
/* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
@@ -473,19 +494,21 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
}
- if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
/* apply fixes in PHY AFE */
- gm_phy_write(hw, port, 22, 255);
+ pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
+
/* increase differential signal amplitude in 10BASE-T */
- gm_phy_write(hw, port, 24, 0xaa99);
- gm_phy_write(hw, port, 23, 0x2011);
+ gm_phy_write(hw, port, 0x18, 0xaa99);
+ gm_phy_write(hw, port, 0x17, 0x2011);
/* fix for IEEE A/B Symmetry failure in 1000BASE-T */
- gm_phy_write(hw, port, 24, 0xa204);
- gm_phy_write(hw, port, 23, 0x2002);
+ gm_phy_write(hw, port, 0x18, 0xa204);
+ gm_phy_write(hw, port, 0x17, 0x2002);
/* set page register to 0 */
- gm_phy_write(hw, port, 22, 0);
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
} else {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
@@ -559,6 +582,11 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
if (sky2->duplex == DUPLEX_FULL)
reg |= GM_GPCR_DUP_FULL;
+
+ /* turn off pause in 10/100mbps half duplex */
+ else if (sky2->speed != SPEED_1000 &&
+ hw->chip_id != CHIP_ID_YUKON_EC_U)
+ sky2->tx_pause = sky2->rx_pause = 0;
} else
reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL;
@@ -1504,17 +1532,26 @@ static void sky2_link_up(struct sky2_port *sky2)
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
- if (hw->chip_id == CHIP_ID_YUKON_XL) {
+ if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) {
u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+ u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
+
+ switch(sky2->speed) {
+ case SPEED_10:
+ led |= PHY_M_LEDC_INIT_CTRL(7);
+ break;
+
+ case SPEED_100:
+ led |= PHY_M_LEDC_STA1_CTRL(7);
+ break;
+
+ case SPEED_1000:
+ led |= PHY_M_LEDC_STA0_CTRL(7);
+ break;
+ }
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
- PHY_M_LEDC_INIT_CTRL(sky2->speed ==
- SPEED_10 ? 7 : 0) |
- PHY_M_LEDC_STA1_CTRL(sky2->speed ==
- SPEED_100 ? 7 : 0) |
- PHY_M_LEDC_STA0_CTRL(sky2->speed ==
- SPEED_1000 ? 7 : 0));
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
}
@@ -1589,7 +1626,7 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
sky2->speed = sky2_phy_speed(hw, aux);
/* Pause bits are offset (9..8) */
- if (hw->chip_id == CHIP_ID_YUKON_XL)
+ if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)
aux >>= 6;
sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0;
@@ -2226,13 +2263,6 @@ static int __devinit sky2_reset(struct sky2_hw *hw)
return -EOPNOTSUPP;
}
- /* This chip is new and not tested yet */
- if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
- pr_info(PFX "%s: is a version of Yukon 2 chipset that has not been tested yet.\n",
- pci_name(hw->pdev));
- pr_info("Please report success/failure to maintainer <shemminger@osdl.org>\n");
- }
-
/* disable ASF */
if (hw->chip_id <= CHIP_ID_YUKON_EC) {
sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index b026f5653f0..8012994c9b9 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -378,6 +378,9 @@ enum {
CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */
CHIP_REV_YU_EC_A2 = 1, /* Chip Rev. for Yukon-EC A2 */
CHIP_REV_YU_EC_A3 = 2, /* Chip Rev. for Yukon-EC A3 */
+
+ CHIP_REV_YU_EC_U_A0 = 0,
+ CHIP_REV_YU_EC_U_A1 = 1,
};
/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */