diff options
-rw-r--r-- | drivers/net/e1000e/e1000.h | 1 | ||||
-rw-r--r-- | drivers/net/e1000e/ich8lan.c | 57 | ||||
-rw-r--r-- | drivers/net/e1000e/phy.c | 85 |
3 files changed, 53 insertions, 90 deletions
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index cebbd9079d5..d6ee28f6ea0 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -582,7 +582,6 @@ extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow); extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw); extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); extern s32 e1000_check_polarity_82577(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index ad08cf3f40c..c2ea8619750 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -138,6 +138,10 @@ #define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ #define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ +/* KMRN Mode Control */ +#define HV_KMRN_MODE_CTRL PHY_REG(769, 16) +#define HV_KMRN_MDIO_SLOW 0x0400 + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -219,6 +223,7 @@ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw); static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); +static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -270,7 +275,21 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; - e1000e_get_phy_id(hw); + ret_val = e1000e_get_phy_id(hw); + if (ret_val) + goto out; + if ((phy->id == 0) || (phy->id == PHY_REVISION_MASK)) { + /* + * In case the PHY needs to be in mdio slow mode (eg. 82577), + * set slow mode and try to get the PHY id again. + */ + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (ret_val) + goto out; + ret_val = e1000e_get_phy_id(hw); + if (ret_val) + goto out; + } phy->type = e1000e_get_phy_type_from_id(phy->id); switch (phy->type) { @@ -292,6 +311,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) break; } +out: return ret_val; } @@ -1076,6 +1096,26 @@ out: /** + * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode + * @hw: pointer to the HW structure + **/ +static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw) +{ + s32 ret_val; + u16 data; + + ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data); + if (ret_val) + return ret_val; + + data |= HV_KMRN_MDIO_SLOW; + + ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data); + + return ret_val; +} + +/** * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be * done after every PHY reset. **/ @@ -1086,6 +1126,13 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) if (hw->mac.type != e1000_pchlan) return ret_val; + /* Set MDIO slow mode before any other MDIO access */ + if (hw->phy.type == e1000_phy_82577) { + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (ret_val) + goto out; + } + if (((hw->phy.type == e1000_phy_82577) && ((hw->phy.revision == 1) || (hw->phy.revision == 2))) || ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) { @@ -1184,6 +1231,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) /* Allow time for h/w to get to a quiescent state after reset */ mdelay(10); + /* Perform any necessary post-reset workarounds */ if (hw->mac.type == e1000_pchlan) { ret_val = e1000_hv_phy_workarounds_ich8lan(hw); if (ret_val) @@ -2484,6 +2532,10 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) if (!ret_val) e1000_release_swflag_ich8lan(hw); + /* Perform any necessary post-reset workarounds */ + if (hw->mac.type == e1000_pchlan) + ret_val = e1000_hv_phy_workarounds_ich8lan(hw); + if (ctrl & E1000_CTRL_PHY_RST) ret_val = hw->phy.ops.get_cfg_done(hw); @@ -2528,9 +2580,6 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) kab |= E1000_KABGTXD_BGSQLBIAS; ew32(KABGTXD, kab); - if (hw->mac.type == e1000_pchlan) - ret_val = e1000_hv_phy_workarounds_ich8lan(hw); - out: return ret_val; } diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 55a2c0acfee..7f3ceb9dad6 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -152,32 +152,9 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) if (phy->id != 0 && phy->id != PHY_REVISION_MASK) goto out; - /* - * If the PHY ID is still unknown, we may have an 82577 - * without link. We will try again after setting Slow MDIC - * mode. No harm in trying again in this case since the PHY - * ID is unknown at this point anyway. - */ - ret_val = phy->ops.acquire(hw); - if (ret_val) - goto out; - ret_val = e1000_set_mdio_slow_mode_hv(hw, true); - if (ret_val) - goto out; - phy->ops.release(hw); - retry_count++; } out: - /* Revert to MDIO fast mode, if applicable */ - if (retry_count) { - ret_val = phy->ops.acquire(hw); - if (ret_val) - return ret_val; - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); - phy->ops.release(hw); - } - return ret_val; } @@ -2791,38 +2768,6 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) } /** - * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode - * @hw: pointer to the HW structure - * @slow: true for slow mode, false for normal mode - * - * Assumes semaphore already acquired. - **/ -s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow) -{ - s32 ret_val = 0; - u16 data = 0; - - /* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */ - hw->phy.addr = 1; - ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, - (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT)); - if (ret_val) - goto out; - - ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1, - (0x2180 | (slow << 10))); - if (ret_val) - goto out; - - /* dummy read when reverting to fast mode - throw away result */ - if (!slow) - ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data); - -out: - return ret_val; -} - -/** * __e1000_read_phy_reg_hv - Read HV PHY register * @hw: pointer to the HW structure * @offset: register offset to be read @@ -2839,7 +2784,6 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); - bool in_slow_mode = false; if (!locked) { ret_val = hw->phy.ops.acquire(hw); @@ -2847,16 +2791,6 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, return ret_val; } - /* Workaround failure in MDIO access while cable is disconnected */ - if ((hw->phy.type == e1000_phy_82577) && - !(er32(STATUS) & E1000_STATUS_LU)) { - ret_val = e1000_set_mdio_slow_mode_hv(hw, true); - if (ret_val) - goto out; - - in_slow_mode = true; - } - /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, @@ -2893,10 +2827,6 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data); out: - /* Revert to MDIO fast mode, if applicable */ - if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); - if (!locked) hw->phy.ops.release(hw); @@ -2948,7 +2878,6 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); - bool in_slow_mode = false; if (!locked) { ret_val = hw->phy.ops.acquire(hw); @@ -2956,16 +2885,6 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, return ret_val; } - /* Workaround failure in MDIO access while cable is disconnected */ - if ((hw->phy.type == e1000_phy_82577) && - !(er32(STATUS) & E1000_STATUS_LU)) { - ret_val = e1000_set_mdio_slow_mode_hv(hw, true); - if (ret_val) - goto out; - - in_slow_mode = true; - } - /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, @@ -3019,10 +2938,6 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, data); out: - /* Revert to MDIO fast mode, if applicable */ - if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); - if (!locked) hw->phy.ops.release(hw); |