aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/include/asm/pte-8xx.h13
-rw-r--r--arch/powerpc/kernel/head_8xx.S99
2 files changed, 57 insertions, 55 deletions
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h
index dd5ea95fe61..68ba861331e 100644
--- a/arch/powerpc/include/asm/pte-8xx.h
+++ b/arch/powerpc/include/asm/pte-8xx.h
@@ -33,21 +33,20 @@
#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
#define _PAGE_SPECIAL 0x0008 /* SW entry, forced to 0 by the TLB miss */
+#define _PAGE_DIRTY 0x0100 /* C: page changed */
-/* These five software bits must be masked out when the entry is loaded
- * into the TLB.
+/* These 3 software bits must be masked out when the entry is loaded
+ * into the TLB, 2 SW bits left.
*/
#define _PAGE_GUARDED 0x0010 /* software: guarded access */
-#define _PAGE_DIRTY 0x0020 /* software: page changed */
-#define _PAGE_RW 0x0040 /* software: user write access allowed */
-#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
+#define _PAGE_ACCESSED 0x0020 /* software: page referenced */
/* Setting any bits in the nibble with the follow two controls will
* require a TLB exception handler change. It is assumed unused bits
* are always zero.
*/
-#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
-#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
+#define _PAGE_RW 0x0400 /* lsb PP bits, inverted in HW */
+#define _PAGE_USER 0x0800 /* msb PP bits */
#define _PMD_PRESENT 0x0001
#define _PMD_BAD 0x0ff0
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 6ded19d0189..97bd523a027 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -333,26 +333,20 @@ InstructionTLBMiss:
mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
lwz r10, 0(r11) /* Get the pte */
-#ifdef CONFIG_SWAP
- /* do not set the _PAGE_ACCESSED bit of a non-present page */
- andi. r11, r10, _PAGE_PRESENT
- beq 4f
- ori r10, r10, _PAGE_ACCESSED
- mfspr r11, SPRN_MD_TWC /* get the pte address again */
- stw r10, 0(r11)
-4:
-#else
- ori r10, r10, _PAGE_ACCESSED
- stw r10, 0(r11)
-#endif
+ andi. r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT
+ cmpwi cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT
+ bne- cr0, 2f
+
+ /* Clear PP lsb, 0x400 */
+ rlwinm r10, r10, 0, 22, 20
/* The Linux PTE won't go exactly into the MMU TLB.
- * Software indicator bits 21, 22 and 28 must be clear.
+ * Software indicator bits 22 and 28 must be clear.
* Software indicator bits 24, 25, 26, and 27 must be
* set. All other Linux PTE bits control the behavior
* of the MMU.
*/
-2: li r11, 0x00f0
+ li r11, 0x00f0
rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
DO_8xx_CPU6(0x2d80, r3)
mtspr SPRN_MI_RPN, r10 /* Update TLB entry */
@@ -365,6 +359,22 @@ InstructionTLBMiss:
lwz r3, 8(r0)
#endif
rfi
+2:
+ mfspr r11, SPRN_SRR1
+ /* clear all error bits as TLB Miss
+ * sets a few unconditionally
+ */
+ rlwinm r11, r11, 0, 0xffff
+ mtspr SPRN_SRR1, r11
+
+ mfspr r10, SPRN_M_TW /* Restore registers */
+ lwz r11, 0(r0)
+ mtcr r11
+ lwz r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+ lwz r3, 8(r0)
+#endif
+ b InstructionAccess
. = 0x1200
DataStoreTLBMiss:
@@ -409,21 +419,27 @@ DataStoreTLBMiss:
DO_8xx_CPU6(0x3b80, r3)
mtspr SPRN_MD_TWC, r11
-#ifdef CONFIG_SWAP
- /* do not set the _PAGE_ACCESSED bit of a non-present page */
- andi. r11, r10, _PAGE_PRESENT
- beq 4f
- ori r10, r10, _PAGE_ACCESSED
-4:
- /* and update pte in table */
-#else
- ori r10, r10, _PAGE_ACCESSED
-#endif
- mfspr r11, SPRN_MD_TWC /* get the pte address again */
- stw r10, 0(r11)
+ /* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set.
+ * We also need to know if the insn is a load/store, so:
+ * Clear _PAGE_PRESENT and load that which will
+ * trap into DTLB Error with store bit set accordinly.
+ */
+ /* PRESENT=0x1, ACCESSED=0x20
+ * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5));
+ * r10 = (r10 & ~PRESENT) | r11;
+ */
+ rlwinm r11, r10, 32-5, 31, 31
+ and r11, r11, r10
+ rlwimi r10, r11, 0, 31, 31
+
+ /* Honour kernel RO, User NA */
+ andi. r11, r10, _PAGE_USER | _PAGE_RW
+ bne- cr0, 5f
+ ori r10,r10, 0x200 /* Extended encoding, bit 22 */
+5: xori r10, r10, _PAGE_RW /* invert RW bit */
/* The Linux PTE won't go exactly into the MMU TLB.
- * Software indicator bits 21, 22 and 28 must be clear.
+ * Software indicator bits 22 and 28 must be clear.
* Software indicator bits 24, 25, 26, and 27 must be
* set. All other Linux PTE bits control the behavior
* of the MMU.
@@ -469,11 +485,12 @@ DataTLBError:
stw r10, 0(r0)
stw r11, 4(r0)
- /* First, make sure this was a store operation.
+ mfspr r11, SPRN_DSISR
+ andis. r11, r11, 0x4800 /* !translation or protection */
+ bne 2f /* branch if either is set */
+ /* Only Change bit left now, do it here as it is faster
+ * than trapping to the C fault handler.
*/
- mfspr r10, SPRN_DSISR
- andis. r11, r10, 0x0200 /* If set, indicates store op */
- beq 2f
/* The EA of a data TLB miss is automatically stored in the MD_EPN
* register. The EA of a data TLB error is automatically stored in
@@ -522,26 +539,12 @@ DataTLBError:
mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
lwz r10, 0(r11) /* Get the pte */
- andi. r11, r10, _PAGE_RW /* Is it writeable? */
- beq 2f /* Bail out if not */
-
- /* Update 'changed', among others.
- */
-#ifdef CONFIG_SWAP
- ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
- /* do not set the _PAGE_ACCESSED bit of a non-present page */
- andi. r11, r10, _PAGE_PRESENT
- beq 4f
- ori r10, r10, _PAGE_ACCESSED
-4:
-#else
- ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-#endif
- mfspr r11, SPRN_MD_TWC /* Get pte address again */
+ ori r10, r10, _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HWWRITE
stw r10, 0(r11) /* and update pte in table */
+ xori r10, r10, _PAGE_RW /* RW bit is inverted */
/* The Linux PTE won't go exactly into the MMU TLB.
- * Software indicator bits 21, 22 and 28 must be clear.
+ * Software indicator bits 22 and 28 must be clear.
* Software indicator bits 24, 25, 26, and 27 must be
* set. All other Linux PTE bits control the behavior
* of the MMU.