aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-class-regulator136
-rw-r--r--Documentation/DocBook/Makefile2
-rw-r--r--Documentation/DocBook/regulator.tmpl304
-rw-r--r--drivers/Makefile4
-rw-r--r--drivers/regulator/core.c474
-rw-r--r--drivers/regulator/da903x.c12
-rw-r--r--include/linux/regulator/consumer.h8
-rw-r--r--include/linux/regulator/driver.h37
-rw-r--r--include/linux/regulator/machine.h41
9 files changed, 746 insertions, 272 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator
index 3731f6f29bc..873ef1fc156 100644
--- a/Documentation/ABI/testing/sysfs-class-regulator
+++ b/Documentation/ABI/testing/sysfs-class-regulator
@@ -3,8 +3,9 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
- state. This holds the regulator output state.
+ Some regulator directories will contain a field called
+ state. This reports the regulator enable status, for
+ regulators which can report that value.
This will be one of the following strings:
@@ -18,7 +19,8 @@ Description:
'disabled' means the regulator output is OFF and is not
supplying power to the system..
- 'unknown' means software cannot determine the state.
+ 'unknown' means software cannot determine the state, or
+ the reported state is invalid.
NOTE: this field can be used in conjunction with microvolts
and microamps to determine regulator output levels.
@@ -53,9 +55,10 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
microvolts. This holds the regulator output voltage setting
- measured in microvolts (i.e. E-6 Volts).
+ measured in microvolts (i.e. E-6 Volts), for regulators
+ which can report that voltage.
NOTE: This value should not be used to determine the regulator
output voltage level as this value is the same regardless of
@@ -67,9 +70,10 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
microamps. This holds the regulator output current limit
- setting measured in microamps (i.e. E-6 Amps).
+ setting measured in microamps (i.e. E-6 Amps), for regulators
+ which can report that current.
NOTE: This value should not be used to determine the regulator
output current level as this value is the same regardless of
@@ -81,8 +85,9 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
- opmode. This holds the regulator operating mode setting.
+ Some regulator directories will contain a field called
+ opmode. This holds the current regulator operating mode,
+ for regulators which can report it.
The opmode value can be one of the following strings:
@@ -92,7 +97,7 @@ Description:
'standby'
'unknown'
- The modes are described in include/linux/regulator/regulator.h
+ The modes are described in include/linux/regulator/consumer.h
NOTE: This value should not be used to determine the regulator
output operating mode as this value is the same regardless of
@@ -104,9 +109,10 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
min_microvolts. This holds the minimum safe working regulator
- output voltage setting for this domain measured in microvolts.
+ output voltage setting for this domain measured in microvolts,
+ for regulators which support voltage constraints.
NOTE: this will return the string 'constraint not defined' if
the power domain has no min microvolts constraint defined by
@@ -118,9 +124,10 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
max_microvolts. This holds the maximum safe working regulator
- output voltage setting for this domain measured in microvolts.
+ output voltage setting for this domain measured in microvolts,
+ for regulators which support voltage constraints.
NOTE: this will return the string 'constraint not defined' if
the power domain has no max microvolts constraint defined by
@@ -132,10 +139,10 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
min_microamps. This holds the minimum safe working regulator
output current limit setting for this domain measured in
- microamps.
+ microamps, for regulators which support current constraints.
NOTE: this will return the string 'constraint not defined' if
the power domain has no min microamps constraint defined by
@@ -147,10 +154,10 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
max_microamps. This holds the maximum safe working regulator
output current limit setting for this domain measured in
- microamps.
+ microamps, for regulators which support current constraints.
NOTE: this will return the string 'constraint not defined' if
the power domain has no max microamps constraint defined by
@@ -185,7 +192,7 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
requested_microamps. This holds the total requested load
current in microamps for this regulator from all its consumer
devices.
@@ -204,125 +211,102 @@ Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
suspend_mem_microvolts. This holds the regulator output
voltage setting for this domain measured in microvolts when
- the system is suspended to memory.
-
- NOTE: this will return the string 'not defined' if
- the power domain has no suspend to memory voltage defined by
- platform code.
+ the system is suspended to memory, for voltage regulators
+ implementing suspend voltage configuration constraints.
What: /sys/class/regulator/.../suspend_disk_microvolts
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
suspend_disk_microvolts. This holds the regulator output
voltage setting for this domain measured in microvolts when
- the system is suspended to disk.
-
- NOTE: this will return the string 'not defined' if
- the power domain has no suspend to disk voltage defined by
- platform code.
+ the system is suspended to disk, for voltage regulators
+ implementing suspend voltage configuration constraints.
What: /sys/class/regulator/.../suspend_standby_microvolts
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
suspend_standby_microvolts. This holds the regulator output
voltage setting for this domain measured in microvolts when
- the system is suspended to standby.
-
- NOTE: this will return the string 'not defined' if
- the power domain has no suspend to standby voltage defined by
- platform code.
+ the system is suspended to standby, for voltage regulators
+ implementing suspend voltage configuration constraints.
What: /sys/class/regulator/.../suspend_mem_mode
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
suspend_mem_mode. This holds the regulator operating mode
setting for this domain when the system is suspended to
- memory.
-
- NOTE: this will return the string 'not defined' if
- the power domain has no suspend to memory mode defined by
- platform code.
+ memory, for regulators implementing suspend mode
+ configuration constraints.
What: /sys/class/regulator/.../suspend_disk_mode
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
suspend_disk_mode. This holds the regulator operating mode
- setting for this domain when the system is suspended to disk.
-
- NOTE: this will return the string 'not defined' if
- the power domain has no suspend to disk mode defined by
- platform code.
+ setting for this domain when the system is suspended to disk,
+ for regulators implementing suspend mode configuration
+ constraints.
What: /sys/class/regulator/.../suspend_standby_mode
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
suspend_standby_mode. This holds the regulator operating mode
setting for this domain when the system is suspended to
- standby.
-
- NOTE: this will return the string 'not defined' if
- the power domain has no suspend to standby mode defined by
- platform code.
+ standby, for regulators implementing suspend mode
+ configuration constraints.
What: /sys/class/regulator/.../suspend_mem_state
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
suspend_mem_state. This holds the regulator operating state
- when suspended to memory.
-
- This will be one of the following strings:
+ when suspended to memory, for regulators implementing suspend
+ configuration constraints.
- 'enabled'
- 'disabled'
- 'not defined'
+ This will be one of the same strings reported by
+ the "state" attribute.
What: /sys/class/regulator/.../suspend_disk_state
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
suspend_disk_state. This holds the regulator operating state
- when suspended to disk.
-
- This will be one of the following strings:
+ when suspended to disk, for regulators implementing
+ suspend configuration constraints.
- 'enabled'
- 'disabled'
- 'not defined'
+ This will be one of the same strings reported by
+ the "state" attribute.
What: /sys/class/regulator/.../suspend_standby_state
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
- Each regulator directory will contain a field called
+ Some regulator directories will contain a field called
suspend_standby_state. This holds the regulator operating
- state when suspended to standby.
-
- This will be one of the following strings:
+ state when suspended to standby, for regulators implementing
+ suspend configuration constraints.
- 'enabled'
- 'disabled'
- 'not defined'
+ This will be one of the same strings reported by
+ the "state" attribute.
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 0a08126d309..dc3154e4927 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -12,7 +12,7 @@ DOCBOOKS := z8530book.xml mcabook.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
- mac80211.xml debugobjects.xml sh.xml
+ mac80211.xml debugobjects.xml sh.xml regulator.xml
###
# The build process is as follows (targets):
diff --git a/Documentation/DocBook/regulator.tmpl b/Documentation/DocBook/regulator.tmpl
new file mode 100644
index 00000000000..53f4f8d3b81
--- /dev/null
+++ b/Documentation/DocBook/regulator.tmpl
@@ -0,0 +1,304 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="regulator-api">
+ <bookinfo>
+ <title>Voltage and current regulator API</title>
+
+ <authorgroup>
+ <author>
+ <firstname>Liam</firstname>
+ <surname>Girdwood</surname>
+ <affiliation>
+ <address>
+ <email>lrg@slimlogic.co.uk</email>
+ </address>
+ </affiliation>
+ </author>
+ <author>
+ <firstname>Mark</firstname>
+ <surname>Brown</surname>
+ <affiliation>
+ <orgname>Wolfson Microelectronics</orgname>
+ <address>
+ <email>broonie@opensource.wolfsonmicro.com</email>
+ </address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <copyright>
+ <year>2007-2008</year>
+ <holder>Wolfson Microelectronics</holder>
+ </copyright>
+ <copyright>
+ <year>2008</year>
+ <holder>Liam Girdwood</holder>
+ </copyright>
+
+ <legalnotice>
+ <para>
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License version 2 as published by the Free Software Foundation.
+ </para>
+
+ <para>
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
+ </para>
+
+ <para>
+ You should have received a copy of the GNU General Public
+ License along with this program; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ MA 02111-1307 USA
+ </para>
+
+ <para>
+ For more details see the file COPYING in the source
+ distribution of Linux.
+ </para>
+ </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+ <chapter id="intro">
+ <title>Introduction</title>
+ <para>
+ This framework is designed to provide a standard kernel
+ interface to control voltage and current regulators.
+ </para>
+ <para>
+ The intention is to allow systems to dynamically control
+ regulator power output in order to save power and prolong
+ battery life. This applies to both voltage regulators (where
+ voltage output is controllable) and current sinks (where current
+ limit is controllable).
+ </para>
+ <para>
+ Note that additional (and currently more complete) documentation
+ is available in the Linux kernel source under
+ <filename>Documentation/power/regulator</filename>.
+ </para>
+
+ <sect1 id="glossary">
+ <title>Glossary</title>
+ <para>
+ The regulator API uses a number of terms which may not be
+ familiar:
+ </para>
+ <glossary>
+
+ <glossentry>
+ <glossterm>Regulator</glossterm>
+ <glossdef>
+ <para>
+ Electronic device that supplies power to other devices. Most
+ regulators can enable and disable their output and some can also
+ control their output voltage or current.
+ </para>
+ </glossdef>
+ </glossentry>
+
+ <glossentry>
+ <glossterm>Consumer</glossterm>
+ <glossdef>
+ <para>
+ Electronic device which consumes power provided by a regulator.
+ These may either be static, requiring only a fixed supply, or
+ dynamic, requiring active management of the regulator at
+ runtime.
+ </para>
+ </glossdef>
+ </glossentry>
+
+ <glossentry>
+ <glossterm>Power Domain</glossterm>
+ <glossdef>
+ <para>
+ The electronic circuit supplied by a given regulator, including
+ the regulator and all consumer devices. The configuration of
+ the regulator is shared between all the components in the
+ circuit.
+ </para>
+ </glossdef>
+ </glossentry>
+
+ <glossentry>
+ <glossterm>Power Management Integrated Circuit</glossterm>
+ <acronym>PMIC</acronym>
+ <glossdef>
+ <para>
+ An IC which contains numerous regulators and often also other
+ subsystems. In an embedded system the primary PMIC is often
+ equivalent to a combination of the PSU and southbridge in a
+ desktop system.
+ </para>
+ </glossdef>
+ </glossentry>
+ </glossary>
+ </sect1>
+ </chapter>
+
+ <chapter id="consumer">
+ <title>Consumer driver interface</title>
+ <para>
+ This offers a similar API to the kernel clock framework.
+ Consumer drivers use <link
+ linkend='API-regulator-get'>get</link> and <link
+ linkend='API-regulator-put'>put</link> operations to acquire and
+ release regulators. Functions are
+ provided to <link linkend='API-regulator-enable'>enable</link>
+ and <link linkend='API-regulator-disable'>disable</link> the
+ reguator and to get and set the runtime parameters of the
+ regulator.
+ </para>
+ <para>
+ When requesting regulators consumers use symbolic names for their
+ supplies, such as "Vcc", which are mapped into actual regulator
+ devices by the machine interface.
+ </para>
+ <para>
+ A stub version of this API is provided when the regulator
+ framework is not in use in order to minimise the need to use
+ ifdefs.
+ </para>
+
+ <sect1 id="consumer-enable">
+ <title>Enabling and disabling</title>
+ <para>
+ The regulator API provides reference counted enabling and
+ disabling of regulators. Consumer devices use the <function><link
+ linkend='API-regulator-enable'>regulator_enable</link></function>
+ and <function><link
+ linkend='API-regulator-disable'>regulator_disable</link>
+ </function> functions to enable and disable regulators. Calls
+ to the two functions must be balanced.
+ </para>
+ <para>
+ Note that since multiple consumers may be using a regulator and
+ machine constraints may not allow the regulator to be disabled
+ there is no guarantee that calling
+ <function>regulator_disable</function> will actually cause the
+ supply provided by the regulator to be disabled. Consumer
+ drivers should assume that the regulator may be enabled at all
+ times.
+ </para>
+ </sect1>
+
+ <sect1 id="consumer-config">
+ <title>Configuration</title>
+ <para>
+ Some consumer devices may need to be able to dynamically
+ configure their supplies. For example, MMC drivers may need to
+ select the correct operating voltage for their cards. This may
+ be done while the regulator is enabled or disabled.
+ </para>
+ <para>
+ The <function><link
+ linkend='API-regulator-set-voltage'>regulator_set_voltage</link>
+ </function> and <function><link
+ linkend='API-regulator-set-current-limit'
+ >regulator_set_current_limit</link>
+ </function> functions provide the primary interface for this.
+ Both take ranges of voltages and currents, supporting drivers
+ that do not require a specific value (eg, CPU frequency scaling
+ normally permits the CPU to use a wider range of supply
+ voltages at lower frequencies but does not require that the
+ supply voltage be lowered). Where an exact value is required
+ both minimum and maximum values should be identical.
+ </para>
+ </sect1>
+
+ <sect1 id="consumer-callback">
+ <title>Callbacks</title>
+ <para>
+ Callbacks may also be <link
+ linkend='API-regulator-register-notifier'>registered</link>
+ for events such as regulation failures.
+ </para>
+ </sect1>
+ </chapter>
+
+ <chapter id="driver">
+ <title>Regulator driver interface</title>
+ <para>
+ Drivers for regulator chips <link
+ linkend='API-regulator-register'>register</link> the regulators
+ with the regulator core, providing operations structures to the
+ core. A <link
+ linkend='API-regulator-notifier-call-chain'>notifier</link> interface
+ allows error conditions to be reported to the core.
+ </para>
+ <para>
+ Registration should be triggered by explicit setup done by the
+ platform, supplying a <link
+ linkend='API-struct-regulator-init-data'>struct
+ regulator_init_data</link> for the regulator containing
+ <link linkend='machine-constraint'>constraint</link> and
+ <link linkend='machine-supply'>supply</link> information.
+ </para>
+ </chapter>
+
+ <chapter id="machine">
+ <title>Machine interface</title>
+ <para>
+ This interface provides a way to define how regulators are
+ connected to consumers on a given system and what the valid
+ operating parameters are for the system.
+ </para>
+
+ <sect1 id="machine-supply">
+ <title>Supplies</title>
+ <para>
+ Regulator supplies are specified using <link
+ linkend='API-struct-regulator-consumer-supply'>struct
+ regulator_consumer_supply</link>. This is done at
+ <link linkend='driver'>driver registration
+ time</link> as part of the machine constraints.
+ </para>
+ </sect1>
+
+ <sect1 id="machine-constraint">
+ <title>Constraints</title>
+ <para>
+ As well as definining the connections the machine interface
+ also provides constraints definining the operations that
+ clients are allowed to perform and the parameters that may be
+ set. This is required since generally regulator devices will
+ offer more flexibility than it is safe to use on a given
+ system, for example supporting higher supply voltages than the
+ consumers are rated for.
+ </para>
+ <para>
+ This is done at <link linkend='driver'>driver
+ registration time</link> by providing a <link
+ linkend='API-struct-regulation-constraints'>struct
+ regulation_constraints</link>.
+ </para>
+ <para>
+ The constraints may also specify an initial configuration for the
+ regulator in the constraints, which is particularly useful for
+ use with static consumers.
+ </para>
+ </sect1>
+ </chapter>
+
+ <chapter id="api">
+ <title>API reference</title>
+ <para>
+ Due to limitations of the kernel documentation framework and the
+ existing layout of the source code the entire regulator API is
+ documented here.
+ </para>
+!Iinclude/linux/regulator/consumer.h
+!Iinclude/linux/regulator/machine.h
+!Iinclude/linux/regulator/driver.h
+!Edrivers/regulator/core.c
+ </chapter>
+</book>
diff --git a/drivers/Makefile b/drivers/Makefile
index e121b66ef08..6326f4dbbda 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -18,6 +18,9 @@ obj-$(CONFIG_ARM_AMBA) += amba/
obj-$(CONFIG_XEN) += xen/
+# regulators early, since some subsystems rely on them to initialize
+obj-$(CONFIG_REGULATOR) += regulator/
+
# char/ comes before serial/ etc so that the VT console is the boot-time
# default.
obj-y += char/
@@ -101,5 +104,4 @@ obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_OF) += of/
obj-$(CONFIG_SSB) += ssb/
obj-$(CONFIG_VIRTIO) += virtio/
-obj-$(CONFIG_REGULATOR) += regulator/
obj-$(CONFIG_STAGING) += staging/
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 02a774424e8..f511a406fca 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -29,7 +29,7 @@ static DEFINE_MUTEX(regulator_list_mutex);
static LIST_HEAD(regulator_list);
static LIST_HEAD(regulator_map_list);
-/**
+/*
* struct regulator_dev
*
* Voltage / Current regulator class device. One for each regulator.
@@ -56,7 +56,7 @@ struct regulator_dev {
void *reg_data; /* regulator_dev data */
};
-/**
+/*
* struct regulator_map
*
* Used to provide symbolic supply names to devices.
@@ -79,7 +79,7 @@ struct regulator {
int uA_load;
int min_uV;
int max_uV;
- int enabled; /* client has called enabled */
+ int enabled; /* count of client enables */
char *supply_name;
struct device_attribute dev_attr;
struct regulator_dev *rdev;
@@ -174,6 +174,16 @@ static int regulator_check_current_limit(struct regulator_dev *rdev,
/* operating mode constraint check */
static int regulator_check_mode(struct regulator_dev *rdev, int mode)
{
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ case REGULATOR_MODE_NORMAL:
+ case REGULATOR_MODE_IDLE:
+ case REGULATOR_MODE_STANDBY:
+ break;
+ default:
+ return -EINVAL;
+ }
+
if (!rdev->constraints) {
printk(KERN_ERR "%s: no constraints for %s\n", __func__,
rdev->desc->name);
@@ -232,6 +242,7 @@ static ssize_t regulator_uV_show(struct device *dev,
return ret;
}
+static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL);
static ssize_t regulator_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -240,6 +251,7 @@ static ssize_t regulator_uA_show(struct device *dev,
return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
}
+static DEVICE_ATTR(microamps, 0444, regulator_uA_show, NULL);
static ssize_t regulator_name_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -257,12 +269,8 @@ static ssize_t regulator_name_show(struct device *dev,
return sprintf(buf, "%s\n", name);
}
-static ssize_t regulator_opmode_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t regulator_print_opmode(char *buf, int mode)
{
- struct regulator_dev *rdev = dev_get_drvdata(dev);
- int mode = _regulator_get_mode(rdev);
-
switch (mode) {
case REGULATOR_MODE_FAST:
return sprintf(buf, "fast\n");
@@ -276,12 +284,17 @@ static ssize_t regulator_opmode_show(struct device *dev,
return sprintf(buf, "unknown\n");
}
-static ssize_t regulator_state_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t regulator_opmode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- int state = _regulator_is_enabled(rdev);
+ return regulator_print_opmode(buf, _regulator_get_mode(rdev));
+}
+static DEVICE_ATTR(opmode, 0444, regulator_opmode_show, NULL);
+
+static ssize_t regulator_print_state(char *buf, int state)
+{
if (state > 0)
return sprintf(buf, "enabled\n");
else if (state == 0)
@@ -290,6 +303,15 @@ static ssize_t regulator_state_show(struct device *dev,
return sprintf(buf, "unknown\n");
}
+static ssize_t regulator_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
+
+ return regulator_print_state(buf, _regulator_is_enabled(rdev));
+}
+static DEVICE_ATTR(state, 0444, regulator_state_show, NULL);
+
static ssize_t regulator_min_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -300,6 +322,7 @@ static ssize_t regulator_min_uA_show(struct device *dev,
return sprintf(buf, "%d\n", rdev->constraints->min_uA);
}
+static DEVICE_ATTR(min_microamps, 0444, regulator_min_uA_show, NULL);
static ssize_t regulator_max_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -311,6 +334,7 @@ static ssize_t regulator_max_uA_show(struct device *dev,
return sprintf(buf, "%d\n", rdev->constraints->max_uA);
}
+static DEVICE_ATTR(max_microamps, 0444, regulator_max_uA_show, NULL);
static ssize_t regulator_min_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -322,6 +346,7 @@ static ssize_t regulator_min_uV_show(struct device *dev,
return sprintf(buf, "%d\n", rdev->constraints->min_uV);
}
+static DEVICE_ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL);
static ssize_t regulator_max_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -333,6 +358,7 @@ static ssize_t regulator_max_uV_show(struct device *dev,
return sprintf(buf, "%d\n", rdev->constraints->max_uV);
}
+static DEVICE_ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL);
static ssize_t regulator_total_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -347,6 +373,7 @@ static ssize_t regulator_total_uA_show(struct device *dev,
mutex_unlock(&rdev->mutex);
return sprintf(buf, "%d\n", uA);
}
+static DEVICE_ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL);
static ssize_t regulator_num_users_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -374,153 +401,106 @@ static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
}
+static DEVICE_ATTR(suspend_mem_microvolts, 0444,
+ regulator_suspend_mem_uV_show, NULL);
static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
}
+static DEVICE_ATTR(suspend_disk_microvolts, 0444,
+ regulator_suspend_disk_uV_show, NULL);
static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
}
-
-static ssize_t suspend_opmode_show(struct regulator_dev *rdev,
- unsigned int mode, char *buf)
-{
- switch (mode) {
- case REGULATOR_MODE_FAST:
- return sprintf(buf, "fast\n");
- case REGULATOR_MODE_NORMAL:
- return sprintf(buf, "normal\n");
- case REGULATOR_MODE_IDLE:
- return sprintf(buf, "idle\n");
- case REGULATOR_MODE_STANDBY:
- return sprintf(buf, "standby\n");
- }
- return sprintf(buf, "unknown\n");
-}
+static DEVICE_ATTR(suspend_standby_microvolts, 0444,
+ regulator_suspend_standby_uV_show, NULL);
static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
- return suspend_opmode_show(rdev,
- rdev->constraints->state_mem.mode, buf);
+ return regulator_print_opmode(buf,
+ rdev->constraints->state_mem.mode);
}
+static DEVICE_ATTR(suspend_mem_mode, 0444,
+ regulator_suspend_mem_mode_show, NULL);
static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
- return suspend_opmode_show(rdev,
- rdev->constraints->state_disk.mode, buf);
+ return regulator_print_opmode(buf,
+ rdev->constraints->state_disk.mode);
}
+static DEVICE_ATTR(suspend_disk_mode, 0444,
+ regulator_suspend_disk_mode_show, NULL);
static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
- return suspend_opmode_show(rdev,
- rdev->constraints->state_standby.mode, buf);
+ return regulator_print_opmode(buf,
+ rdev->constraints->state_standby.mode);
}
+static DEVICE_ATTR(suspend_standby_mode, 0444,
+ regulator_suspend_standby_mode_show, NULL);
static ssize_t regulator_suspend_mem_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
-
- if (rdev->constraints->state_mem.enabled)
- return sprintf(buf, "enabled\n");
- else
- return sprintf(buf, "disabled\n");
+ return regulator_print_state(buf,
+ rdev->constraints->state_mem.enabled);
}
+static DEVICE_ATTR(suspend_mem_state, 0444,
+ regulator_suspend_mem_state_show, NULL);
static ssize_t regulator_suspend_disk_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
-
- if (rdev->constraints->state_disk.enabled)
- return sprintf(buf, "enabled\n");
- else
- return sprintf(buf, "disabled\n");
+ return regulator_print_state(buf,
+ rdev->constraints->state_disk.enabled);
}
+static DEVICE_ATTR(suspend_disk_state, 0444,
+ regulator_suspend_disk_state_show, NULL);
static ssize_t regulator_suspend_standby_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
-
- if (rdev->constraints->state_standby.enabled)
- return sprintf(buf, "enabled\n");
- else
- return sprintf(buf, "disabled\n");
+ return regulator_print_state(buf,
+ rdev->constraints->state_standby.enabled);
}
+static DEVICE_ATTR(suspend_standby_state, 0444,
+ regulator_suspend_standby_state_show, NULL);
+
+/*
+ * These are the only attributes are present for all regulators.
+ * Other attributes are a function of regulator functionality.
+ */
static struct device_attribute regulator_dev_attrs[] = {
__ATTR(name, 0444, regulator_name_show, NULL),
- __ATTR(microvolts, 0444, regulator_uV_show, NULL),
- __ATTR(microamps, 0444, regulator_uA_show, NULL),
- __ATTR(opmode, 0444, regulator_opmode_show, NULL),
- __ATTR(state, 0444, regulator_state_show, NULL),
- __ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL),
- __ATTR(min_microamps, 0444, regulator_min_uA_show, NULL),
- __ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL),
- __ATTR(max_microamps, 0444, regulator_max_uA_show, NULL),
- __ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL),
__ATTR(num_users, 0444, regulator_num_users_show, NULL),
__ATTR(type, 0444, regulator_type_show, NULL),
- __ATTR(suspend_mem_microvolts, 0444,
- regulator_suspend_mem_uV_show, NULL),
- __ATTR(suspend_disk_microvolts, 0444,
- regulator_suspend_disk_uV_show, NULL),
- __ATTR(suspend_standby_microvolts, 0444,
- regulator_suspend_standby_uV_show, NULL),
- __ATTR(suspend_mem_mode, 0444,
- regulator_suspend_mem_mode_show, NULL),
- __ATTR(suspend_disk_mode, 0444,
- regulator_suspend_disk_mode_show, NULL),
- __ATTR(suspend_standby_mode, 0444,
- regulator_suspend_standby_mode_show, NULL),
- __ATTR(suspend_mem_state, 0444,
- regulator_suspend_mem_state_show, NULL),
- __ATTR(suspend_disk_state, 0444,
- regulator_suspend_disk_state_show, NULL),
- __ATTR(suspend_standby_state, 0444,
- regulator_suspend_standby_state_show, NULL),
__ATTR_NULL,
};
@@ -675,7 +655,8 @@ static void print_constraints(struct regulator_dev *rdev)
/**
* set_machine_constraints - sets regulator constraints
- * @regulator: regulator source
+ * @rdev: regulator source
+ * @constraints: constraints to apply
*
* Allows platform initialisation code to define and constrain
* regulator circuits e.g. valid voltage/current ranges, etc. NOTE:
@@ -750,8 +731,8 @@ out:
/**
* set_supply - set regulator supply regulator
- * @regulator: regulator name
- * @supply: supply regulator name
+ * @rdev: regulator name
+ * @supply_rdev: supply regulator name
*
* Called by platform initialisation code to set the supply regulator for this
* regulator. This ensures that a regulators supply will also be enabled by the
@@ -778,9 +759,9 @@ out:
/**
* set_consumer_device_supply: Bind a regulator to a symbolic supply
- * @regulator: regulator source
- * @dev: device the supply applies to
- * @supply: symbolic name for supply
+ * @rdev: regulator source
+ * @consumer_dev: device the supply applies to
+ * @supply: symbolic name for supply
*
* Allows platform initialisation code to map physical regulator
* sources to symbolic names for supplies for use by devices. Devices
@@ -795,6 +776,20 @@ static int set_consumer_device_supply(struct regulator_dev *rdev,
if (supply == NULL)
return -EINVAL;
+ list_for_each_entry(node, &regulator_map_list, list) {
+ if (consumer_dev != node->dev)
+ continue;
+ if (strcmp(node->supply, supply) != 0)
+ continue;
+
+ dev_dbg(consumer_dev, "%s/%s is '%s' supply; fail %s/%s\n",
+ dev_name(&node->regulator->dev),
+ node->regulator->desc->name,
+ supply,
+ dev_name(&rdev->dev), rdev->desc->name);
+ return -EBUSY;
+ }
+
node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL);
if (node == NULL)
return -ENOMEM;
@@ -963,16 +958,13 @@ void regulator_put(struct regulator *regulator)
if (regulator == NULL || IS_ERR(regulator))
return;
- if (regulator->enabled) {
- printk(KERN_WARNING "Releasing supply %s while enabled\n",
- regulator->supply_name);
- WARN_ON(regulator->enabled);
- regulator_disable(regulator);
- }
-
mutex_lock(&regulator_list_mutex);
rdev = regulator->rdev;
+ if (WARN(regulator->enabled, "Releasing supply %s while enabled\n",
+ regulator->supply_name))
+ _regulator_disable(rdev);
+
/* remove any sysfs entries */
if (regulator->dev) {
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
@@ -1034,29 +1026,26 @@ static int _regulator_enable(struct regulator_dev *rdev)
* regulator_enable - enable regulator output
* @regulator: regulator source
*
- * Enable the regulator output at the predefined voltage or current value.
+ * Request that the regulator be enabled with the regulator output at
+ * the predefined voltage or current value. Calls to regulator_enable()
+ * must be balanced with calls to regulator_disable().
+ *
* NOTE: the output value can be set by other drivers, boot loader or may be
* hardwired in the regulator.
- * NOTE: calls to regulator_enable() must be balanced with calls to
- * regulator_disable().
*/
int regulator_enable(struct regulator *regulator)
{
- int ret;
-
- if (regulator->enabled) {
- printk(KERN_CRIT "Regulator %s already enabled\n",
- regulator->supply_name);
- WARN_ON(regulator->enabled);
- return 0;
- }
+ struct regulator_dev *rdev = regulator->rdev;
+ int ret = 0;
- mutex_lock(&regulator->rdev->mutex);
- regulator->enabled = 1;
- ret = _regulator_enable(regulator->rdev);
- if (ret != 0)
- regulator->enabled = 0;
- mutex_unlock(&regulator->rdev->mutex);
+ mutex_lock(&rdev->mutex);
+ if (regulator->enabled == 0)
+ ret = _regulator_enable(rdev);
+ else if (regulator->enabled < 0)
+ ret = -EIO;
+ if (ret == 0)
+ regulator->enabled++;
+ mutex_unlock(&rdev->mutex);
return ret;
}
EXPORT_SYMBOL_GPL(regulator_enable);
@@ -1100,27 +1089,31 @@ static int _regulator_disable(struct regulator_dev *rdev)
* regulator_disable - disable regulator output
* @regulator: regulator source
*
- * Disable the regulator output voltage or current.
- * NOTE: this will only disable the regulator output if no other consumer
- * devices have it enabled.
- * NOTE: calls to regulator_enable() must be balanced with calls to
+ * Disable the regulator output voltage or current. Calls to
+ * regulator_enable() must be balanced with calls to
* regulator_disable().
+ *
+ * NOTE: this will only disable the regulator output if no other consumer
+ * devices have it enabled, the regulator device supports disabling and
+ * machine constraints permit this operation.
*/
int regulator_disable(struct regulator *regulator)
{
- int ret;
-
- if (!regulator->enabled) {
- printk(KERN_ERR "%s: not in use by this consumer\n",
- __func__);
- return 0;
- }
+ struct regulator_dev *rdev = regulator->rdev;
+ int ret = 0;
- mutex_lock(&regulator->rdev->mutex);
- regulator->enabled = 0;
- regulator->uA_load = 0;
- ret = _regulator_disable(regulator->rdev);
- mutex_unlock(&regulator->rdev->mutex);
+ mutex_lock(&rdev->mutex);
+ if (regulator->enabled == 1) {
+ ret = _regulator_disable(rdev);
+ if (ret == 0)
+ regulator->uA_load = 0;
+ } else if (WARN(regulator->enabled <= 0,
+ "unbalanced disables for supply %s\n",
+ regulator->supply_name))
+ ret = -EIO;
+ if (ret == 0)
+ regulator->enabled--;
+ mutex_unlock(&rdev->mutex);
return ret;
}
EXPORT_SYMBOL_GPL(regulator_disable);
@@ -1196,7 +1189,13 @@ out:
* regulator_is_enabled - is the regulator output enabled
* @regulator: regulator source
*
- * Returns zero for disabled otherwise return number of enable requests.
+ * Returns positive if the regulator driver backing the source/client
+ * has requested that the device be enabled, zero if it hasn't, else a
+ * negative errno code.
+ *
+ * Note that the device backing this regulator handle can have multiple
+ * users, so it might be enabled even if regulator_enable() was never
+ * called for this particular source.
*/
int regulator_is_enabled(struct regulator *regulator)
{
@@ -1219,7 +1218,7 @@ EXPORT_SYMBOL_GPL(regulator_is_enabled);
*
* NOTE: If the regulator is shared between several devices then the lowest
* request voltage that meets the system constraints will be used.
- * NOTE: Regulator system constraints must be set for this regulator before
+ * Regulator system constraints must be set for this regulator before
* calling this function otherwise this call will fail.
*/
int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
@@ -1493,7 +1492,8 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
mode = rdev->desc->ops->get_optimum_mode(rdev,
input_uV, output_uV,
total_uA_load);
- if (ret <= 0) {
+ ret = regulator_check_mode(rdev, mode);
+ if (ret < 0) {
printk(KERN_ERR "%s: failed to get optimum mode for %s @"
" %d uA %d -> %d uV\n", __func__, rdev->desc->name,
total_uA_load, input_uV, output_uV);
@@ -1501,7 +1501,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
}
ret = rdev->desc->ops->set_mode(rdev, mode);
- if (ret <= 0) {
+ if (ret < 0) {
printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n",
__func__, mode, rdev->desc->name);
goto out;
@@ -1516,7 +1516,7 @@ EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
/**
* regulator_register_notifier - register regulator event notifier
* @regulator: regulator source
- * @notifier_block: notifier block
+ * @nb: notifier block
*
* Register notifier block to receive regulator events.
*/
@@ -1531,7 +1531,7 @@ EXPORT_SYMBOL_GPL(regulator_register_notifier);
/**
* regulator_unregister_notifier - unregister regulator event notifier
* @regulator: regulator source
- * @notifier_block: notifier block
+ * @nb: notifier block
*
* Unregister regulator event notifier block.
*/
@@ -1697,9 +1697,9 @@ EXPORT_SYMBOL_GPL(regulator_bulk_free);
/**
* regulator_notifier_call_chain - call regulator event notifier
- * @regulator: regulator source
+ * @rdev: regulator source
* @event: notifier block
- * @data:
+ * @data: callback-specific data.
*
* Called by regulator drivers to notify clients a regulator event has
* occurred. We also notify regulator clients downstream.
@@ -1713,10 +1713,122 @@ int regulator_notifier_call_chain(struct regulator_dev *rdev,
}
EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
+/*
+ * To avoid cluttering sysfs (and memory) with useless state, only
+ * create attributes that can be meaningfully displayed.
+ */
+static int add_regulator_attributes(struct regulator_dev *rdev)
+{
+ struct device *dev = &rdev->dev;
+ struct regulator_ops *ops = rdev->desc->ops;
+ int status = 0;
+
+ /* some attributes need specific methods to be displayed */
+ if (ops->get_voltage) {
+ status = device_create_file(dev, &dev_attr_microvolts);
+ if (status < 0)
+ return status;
+ }
+ if (ops->get_current_limit) {
+ status = device_create_file(dev, &dev_attr_microamps);
+ if (status < 0)
+ return status;
+ }
+ if (ops->get_mode) {
+ status = device_create_file(dev, &dev_attr_opmode);
+ if (status < 0)
+ return status;
+ }
+ if (ops->is_enabled) {
+ status = device_create_file(dev, &dev_attr_state);
+ if (status < 0)
+ return status;
+ }
+
+ /* some attributes are type-specific */
+ if (rdev->desc->type == REGULATOR_CURRENT) {
+ status = device_create_file(dev, &dev_attr_requested_microamps);
+ if (status < 0)
+ return status;
+ }
+
+ /* all the other attributes exist to support constraints;
+ * don't show them if there are no constraints, or if the
+ * relevant supporting methods are missing.
+ */
+ if (!rdev->constraints)
+ return status;
+
+ /* constraints need specific supporting methods */
+ if (ops->set_voltage) {
+ status = device_create_file(dev, &dev_attr_min_microvolts);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev, &dev_attr_max_microvolts);
+ if (status < 0)
+ return status;
+ }
+ if (ops->set_current_limit) {
+ status = device_create_file(dev, &dev_attr_min_microamps);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev, &dev_attr_max_microamps);
+ if (status < 0)
+ return status;
+ }
+
+ /* suspend mode constraints need multiple supporting methods */
+ if (!(ops->set_suspend_enable && ops->set_suspend_disable))
+ return status;
+
+ status = device_create_file(dev, &dev_attr_suspend_standby_state);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev, &dev_attr_suspend_mem_state);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev, &dev_attr_suspend_disk_state);
+ if (status < 0)
+ return status;
+
+ if (ops->set_suspend_voltage) {
+ status = device_create_file(dev,
+ &dev_attr_suspend_standby_microvolts);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev,
+ &dev_attr_suspend_mem_microvolts);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev,
+ &dev_attr_suspend_disk_microvolts);
+ if (status < 0)
+ return status;
+ }
+
+ if (ops->set_suspend_mode) {
+ status = device_create_file(dev,
+ &dev_attr_suspend_standby_mode);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev,
+ &dev_attr_suspend_mem_mode);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev,
+ &dev_attr_suspend_disk_mode);
+ if (status < 0)
+ return status;
+ }
+
+ return status;
+}
+
/**
* regulator_register - register regulator
- * @regulator: regulator source
- * @reg_data: private regulator data
+ * @regulator_desc: regulator to register
+ * @dev: struct device for the regulator
+ * @driver_data: private regulator data
*
* Called by regulator drivers to register a regulator.
* Returns 0 on success.
@@ -1761,45 +1873,37 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
/* preform any regulator specific init */
if (init_data->regulator_init) {
ret = init_data->regulator_init(rdev->reg_data);
- if (ret < 0) {
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
- }
- }
-
- /* set regulator constraints */
- ret = set_machine_constraints(rdev, &init_data->constraints);
- if (ret < 0) {
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
+ if (ret < 0)
+ goto clean;
}
/* register with sysfs */
rdev->dev.class = &regulator_class;
rdev->dev.parent = dev;
- snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id),
- "regulator.%d", atomic_inc_return(&regulator_no) - 1);
+ dev_set_name(&rdev->dev, "regulator.%d",
+ atomic_inc_return(&regulator_no) - 1);
ret = device_register(&rdev->dev);
- if (ret != 0) {
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
- }
+ if (ret != 0)
+ goto clean;
dev_set_drvdata(&rdev->dev, rdev);
+ /* set regulator constraints */
+ ret = set_machine_constraints(rdev, &init_data->constraints);
+ if (ret < 0)
+ goto scrub;
+
+ /* add attributes supported by this regulator */
+ ret = add_regulator_attributes(rdev);
+ if (ret < 0)
+ goto scrub;
+
/* set supply regulator if it exists */
if (init_data->supply_regulator_dev) {
ret = set_supply(rdev,
dev_get_drvdata(init_data->supply_regulator_dev));
- if (ret < 0) {
- device_unregister(&rdev->dev);
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
- }
+ if (ret < 0)
+ goto scrub;
}
/* add consumers devices */
@@ -1811,10 +1915,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
for (--i; i >= 0; i--)
unset_consumer_device_supply(rdev,
init_data->consumer_supplies[i].dev);
- device_unregister(&rdev->dev);
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
+ goto scrub;
}
}
@@ -1822,12 +1923,19 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
out:
mutex_unlock(&regulator_list_mutex);
return rdev;
+
+scrub:
+ device_unregister(&rdev->dev);
+clean:
+ kfree(rdev);
+ rdev = ERR_PTR(ret);
+ goto out;
}
EXPORT_SYMBOL_GPL(regulator_register);
/**
* regulator_unregister - unregister regulator
- * @regulator: regulator source
+ * @rdev: regulator to unregister
*
* Called by regulator drivers to unregister a regulator.
*/
@@ -1846,7 +1954,7 @@ void regulator_unregister(struct regulator_dev *rdev)
EXPORT_SYMBOL_GPL(regulator_unregister);
/**
- * regulator_suspend_prepare: prepare regulators for system wide suspend
+ * regulator_suspend_prepare - prepare regulators for system wide suspend
* @state: system suspend state
*
* Configure each regulator with it's suspend operating parameters for state.
@@ -1882,7 +1990,7 @@ EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
/**
* rdev_get_drvdata - get rdev regulator driver data
- * @regulator: regulator
+ * @rdev: regulator
*
* Get rdev regulator driver private data. This call can be used in the
* regulator driver context.
@@ -1919,7 +2027,7 @@ EXPORT_SYMBOL_GPL(regulator_set_drvdata);
/**
* regulator_get_id - get regulator ID
- * @regulator: regulator
+ * @rdev: regulator
*/
int rdev_get_id(struct regulator_dev *rdev)
{
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index 773b29cec8b..fe77730a7ed 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -102,7 +102,7 @@ static int da903x_set_ldo_voltage(struct regulator_dev *rdev,
uint8_t val, mask;
if (check_range(info, min_uV, max_uV)) {
- pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV);
+ pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV);
return -EINVAL;
}
@@ -159,7 +159,7 @@ static int da903x_is_enabled(struct regulator_dev *rdev)
if (ret)
return ret;
- return reg_val & (1 << info->enable_bit);
+ return !!(reg_val & (1 << info->enable_bit));
}
/* DA9030 specific operations */
@@ -172,7 +172,7 @@ static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev,
int ret;
if (check_range(info, min_uV, max_uV)) {
- pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV);
+ pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV);
return -EINVAL;
}
@@ -199,7 +199,7 @@ static int da9030_set_ldo14_voltage(struct regulator_dev *rdev,
int thresh;
if (check_range(info, min_uV, max_uV)) {
- pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV);
+ pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV);
return -EINVAL;
}
@@ -248,7 +248,7 @@ static int da9034_set_dvc_voltage(struct regulator_dev *rdev,
int ret;
if (check_range(info, min_uV, max_uV)) {
- pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV);
+ pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV);
return -EINVAL;
}
@@ -273,7 +273,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev,
uint8_t val, mask;
if (check_range(info, min_uV, max_uV)) {
- pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV);
+ pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV);
return -EINVAL;
}
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index afdc4558bb9..801bf77ff4e 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -104,10 +104,10 @@ struct regulator;
/**
* struct regulator_bulk_data - Data used for bulk regulator operations.
*
- * @supply The name of the supply. Initialised by the user before
- * using the bulk regulator APIs.
- * @consumer The regulator consumer for the supply. This will be managed
- * by the bulk API.
+ * @supply: The name of the supply. Initialised by the user before
+ * using the bulk regulator APIs.
+ * @consumer: The regulator consumer for the supply. This will be managed
+ * by the bulk API.
*
* The regulator APIs provide a series of regulator_bulk_() API calls as
* a convenience to consumers which require multiple supplies. This
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index e37d8056198..2dae05705f1 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -24,7 +24,33 @@ struct regulator_init_data;
/**
* struct regulator_ops - regulator operations.
*
- * This struct describes regulator operations.
+ * This struct describes regulator operations which can be implemented by
+ * regulator chip drivers.
+ *
+ * @enable: Enable the regulator.
+ * @disable: Disable the regulator.
+ * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise.
+ *
+ * @set_voltage: Set the voltage for the regulator within the range specified.
+ * The driver should select the voltage closest to min_uV.
+ * @get_voltage: Return the currently configured voltage for the regulator.
+ *
+ * @set_current_limit: Configure a limit for a current-limited regulator.
+ * @get_current_limit: Get the limit for a current-limited regulator.
+ *
+ * @set_mode: Set the operating mode for the regulator.
+ * @get_mode: Get the current operating mode for the regulator.
+ * @get_optimum_mode: Get the most efficient operating mode for the regulator
+ * when running with the specified parameters.
+ *
+ * @set_suspend_voltage: Set the voltage for the regulator when the system
+ * is suspended.
+ * @set_suspend_enable: Mark the regulator as enabled when the system is
+ * suspended.
+ * @set_suspend_disable: Mark the regulator as disabled when the system is
+ * suspended.
+ * @set_suspend_mode: Set the operating mode for the regulator when the
+ * system is suspended.
*/
struct regulator_ops {
@@ -75,6 +101,15 @@ enum regulator_type {
/**
* struct regulator_desc - Regulator descriptor
*
+ * Each regulator registered with the core is described with a structure of
+ * this type.
+ *
+ * @name: Identifying name for the regulator.
+ * @id: Numerical identifier for the regulator.
+ * @ops: Regulator operations table.
+ * @irq: Interrupt number for the regulator.
+ * @type: Indicates if the regulator is a voltage or current regulator.
+ * @owner: Module providing the regulator, used for refcounting.
*/
struct regulator_desc {
const char *name;
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index c6d69331a81..3794773b23d 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -44,6 +44,10 @@ struct regulator;
* struct regulator_state - regulator state during low power syatem states
*
* This describes a regulators state during a system wide low power state.
+ *
+ * @uV: Operating voltage during suspend.
+ * @mode: Operating mode during suspend.
+ * @enabled: Enabled during suspend.
*/
struct regulator_state {
int uV; /* suspend voltage */
@@ -55,6 +59,30 @@ struct regulator_state {
* struct regulation_constraints - regulator operating constraints.
*
* This struct describes regulator and board/machine specific constraints.
+ *
+ * @name: Descriptive name for the constraints, used for display purposes.
+ *
+ * @min_uV: Smallest voltage consumers may set.
+ * @max_uV: Largest voltage consumers may set.
+ *
+ * @min_uA: Smallest consumers consumers may set.
+ * @max_uA: Largest current consumers may set.
+ *
+ * @valid_modes_mask: Mask of modes which may be configured by consumers.
+ * @valid_ops_mask: Operations which may be performed by consumers.
+ *
+ * @always_on: Set if the regulator should never be disabled.
+ * @boot_on: Set if the regulator is enabled when the system is initially
+ * started.
+ * @apply_uV: Apply the voltage constraint when initialising.
+ *
+ * @input_uV: Input voltage for regulator when supplied by another regulator.
+ *
+ * @state_disk: State for regulator when system is suspended in disk mode.
+ * @state_mem: State for regulator when system is suspended in mem mode.
+ * @state_standby: State for regulator when system is suspended in standby
+ * mode.
+ * @initial_state: Suspend state to set by default.
*/
struct regulation_constraints {
@@ -93,6 +121,9 @@ struct regulation_constraints {
* struct regulator_consumer_supply - supply -> device mapping
*
* This maps a supply name to a device.
+ *
+ * @dev: Device structure for the consumer.
+ * @supply: Name for the supply.
*/
struct regulator_consumer_supply {
struct device *dev; /* consumer */
@@ -103,6 +134,16 @@ struct regulator_consumer_supply {
* struct regulator_init_data - regulator platform initialisation data.
*
* Initialisation constraints, our supply and consumers supplies.
+ *
+ * @supply_regulator_dev: Parent regulator (if any).
+ *
+ * @constraints: Constraints. These must be specified for the regulator to
+ * be usable.
+ * @num_consumer_supplies: Number of consumer device supplies.
+ * @consumer_supplies: Consumer device supply configuration.
+ *
+ * @regulator_init: Callback invoked when the regulator has been registered.
+ * @driver_data: Data passed to regulator_init.
*/
struct regulator_init_data {
struct device *supply_regulator_dev; /* or NULL for LINE */