aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/dvb/faq.txt2
-rw-r--r--Documentation/feature-removal-schedule.txt8
-rw-r--r--Documentation/kernel-parameters.txt3
-rw-r--r--Documentation/lguest/lguest.c2
-rw-r--r--Documentation/video4linux/CARDLIST.bttv1
-rw-r--r--Documentation/video4linux/CARDLIST.cx238855
-rw-r--r--Documentation/video4linux/CARDLIST.saa71345
-rw-r--r--Kbuild8
-rw-r--r--MAINTAINERS34
-rw-r--r--Makefile39
-rw-r--r--arch/arm/mach-imx/mx1ads.c2
-rw-r--r--arch/avr32/boards/atngw100/flash.c5
-rw-r--r--arch/avr32/boards/atngw100/setup.c14
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c1
-rw-r--r--arch/avr32/boards/atstk1000/flash.c5
-rw-r--r--arch/avr32/kernel/Makefile5
-rw-r--r--arch/avr32/kernel/entry-avr32b.S26
-rw-r--r--arch/avr32/kernel/setup.c2
-rw-r--r--arch/avr32/kernel/vmlinux.lds.S143
-rw-r--r--arch/avr32/kernel/vmlinux.lds.c142
-rw-r--r--arch/avr32/mach-at32ap/at32ap7000.c74
-rw-r--r--arch/avr32/mach-at32ap/clock.c116
-rw-r--r--arch/avr32/mach-at32ap/hsmc.c129
-rw-r--r--arch/avr32/mach-at32ap/pio.c4
-rw-r--r--arch/avr32/mach-at32ap/pm.h8
-rw-r--r--arch/avr32/mm/init.c12
-rw-r--r--arch/blackfin/Kconfig365
-rw-r--r--arch/blackfin/configs/BF533-EZKIT_defconfig243
-rw-r--r--arch/blackfin/configs/BF533-STAMP_defconfig280
-rw-r--r--arch/blackfin/configs/BF537-STAMP_defconfig296
-rw-r--r--arch/blackfin/configs/BF548-EZKIT_defconfig480
-rw-r--r--arch/blackfin/configs/BF561-EZKIT_defconfig223
-rw-r--r--arch/blackfin/configs/PNAV-10_defconfig296
-rw-r--r--arch/blackfin/kernel/Makefile5
-rw-r--r--arch/blackfin/kernel/bfin_dma_5xx.c81
-rw-r--r--arch/blackfin/kernel/bfin_gpio.c549
-rw-r--r--arch/blackfin/kernel/bfin_ksyms.c1
-rw-r--r--arch/blackfin/kernel/cacheinit.c5
-rw-r--r--arch/blackfin/kernel/cplbinit.c7
-rw-r--r--arch/blackfin/kernel/early_printk.c214
-rw-r--r--arch/blackfin/kernel/irqchip.c12
-rw-r--r--arch/blackfin/kernel/process.c28
-rw-r--r--arch/blackfin/kernel/ptrace.c24
-rw-r--r--arch/blackfin/kernel/reboot.c78
-rw-r--r--arch/blackfin/kernel/setup.c90
-rw-r--r--arch/blackfin/kernel/traps.c110
-rw-r--r--arch/blackfin/kernel/vmlinux.lds.S48
-rw-r--r--arch/blackfin/lib/memcmp.S2
-rw-r--r--arch/blackfin/lib/memcpy.S2
-rw-r--r--arch/blackfin/lib/memmove.S4
-rw-r--r--arch/blackfin/mach-bf533/boards/cm_bf533.c81
-rw-r--r--arch/blackfin/mach-bf533/boards/ezkit.c91
-rw-r--r--arch/blackfin/mach-bf533/boards/stamp.c119
-rw-r--r--arch/blackfin/mach-bf533/head.S344
-rw-r--r--arch/blackfin/mach-bf537/Kconfig27
-rw-r--r--arch/blackfin/mach-bf537/boards/cm_bf537.c87
-rw-r--r--arch/blackfin/mach-bf537/boards/generic_board.c397
-rw-r--r--arch/blackfin/mach-bf537/boards/pnav10.c53
-rw-r--r--arch/blackfin/mach-bf537/boards/stamp.c142
-rw-r--r--arch/blackfin/mach-bf537/head.S128
-rw-r--r--arch/blackfin/mach-bf548/Kconfig11
-rw-r--r--arch/blackfin/mach-bf548/Makefile2
-rw-r--r--arch/blackfin/mach-bf548/boards/ezkit.c477
-rw-r--r--arch/blackfin/mach-bf548/gpio.c323
-rw-r--r--arch/blackfin/mach-bf548/head.S156
-rw-r--r--arch/blackfin/mach-bf561/boards/cm_bf561.c84
-rw-r--r--arch/blackfin/mach-bf561/boards/ezkit.c82
-rw-r--r--arch/blackfin/mach-bf561/head.S102
-rw-r--r--arch/blackfin/mach-common/Makefile2
-rw-r--r--arch/blackfin/mach-common/arch_checks.c60
-rw-r--r--arch/blackfin/mach-common/cache.S8
-rw-r--r--arch/blackfin/mach-common/cacheinit.S14
-rw-r--r--arch/blackfin/mach-common/cplbhdlr.S8
-rw-r--r--arch/blackfin/mach-common/cplbmgr.S56
-rw-r--r--arch/blackfin/mach-common/dpmc.S54
-rw-r--r--arch/blackfin/mach-common/entry.S268
-rw-r--r--arch/blackfin/mach-common/interrupt.S56
-rw-r--r--arch/blackfin/mach-common/ints-priority-dc.c13
-rw-r--r--arch/blackfin/mach-common/ints-priority-sc.c17
-rw-r--r--arch/blackfin/mach-common/lock.S24
-rw-r--r--arch/blackfin/mm/init.c2
-rw-r--r--arch/blackfin/oprofile/op_blackfin.h8
-rw-r--r--arch/i386/Kconfig8
-rw-r--r--arch/i386/Makefile72
-rw-r--r--arch/i386/boot/Makefile171
-rw-r--r--arch/i386/boot/compressed/Makefile50
-rw-r--r--arch/i386/crypto/Makefile12
-rw-r--r--arch/i386/kernel/Makefile88
-rw-r--r--arch/i386/kernel/acpi/Makefile10
-rw-r--r--arch/i386/kernel/asm-offsets.c147
-rw-r--r--arch/i386/kernel/cpu/mtrr/state.c79
-rw-r--r--arch/i386/kernel/early_printk.c2
-rw-r--r--arch/i386/kernel/entry.S1112
-rw-r--r--arch/i386/kernel/head.S578
-rw-r--r--arch/i386/kernel/signal.c667
-rw-r--r--arch/i386/kernel/tsc_sync.c1
-rw-r--r--arch/i386/kernel/vsyscall-int80.S53
-rw-r--r--arch/i386/kernel/vsyscall-note.S45
-rw-r--r--arch/i386/kernel/vsyscall-sysenter.S122
-rw-r--r--arch/i386/kernel/vsyscall.S15
-rw-r--r--arch/i386/lib/Makefile11
-rw-r--r--arch/i386/mach-generic/Makefile7
-rw-r--r--arch/i386/mach-voyager/Makefile8
-rw-r--r--arch/i386/mm/Makefile10
-rw-r--r--arch/i386/pci/Makefile14
-rw-r--r--arch/ia64/ia32/audit.c2
-rw-r--r--arch/um/sys-i386/sys_call_table.S2
-rw-r--r--arch/um/sys-x86_64/syscall_table.c4
-rw-r--r--arch/x86/boot/.gitignore (renamed from arch/i386/boot/.gitignore)0
-rw-r--r--arch/x86/boot/Makefile171
-rw-r--r--arch/x86/boot/a20.c (renamed from arch/i386/boot/a20.c)0
-rw-r--r--arch/x86/boot/apm.c (renamed from arch/i386/boot/apm.c)0
-rw-r--r--arch/x86/boot/bitops.h (renamed from arch/i386/boot/bitops.h)0
-rw-r--r--arch/x86/boot/boot.h (renamed from arch/i386/boot/boot.h)0
-rw-r--r--arch/x86/boot/cmdline.c (renamed from arch/i386/boot/cmdline.c)0
-rw-r--r--arch/x86/boot/code16gcc.h (renamed from arch/i386/boot/code16gcc.h)0
-rw-r--r--arch/x86/boot/compressed/.gitignore (renamed from arch/i386/boot/compressed/.gitignore)0
-rw-r--r--arch/x86/boot/compressed/Makefile5
-rw-r--r--arch/x86/boot/compressed/Makefile_3250
-rw-r--r--arch/x86/boot/compressed/Makefile_6430
-rw-r--r--arch/x86/boot/compressed/head_32.S (renamed from arch/i386/boot/compressed/head.S)0
-rw-r--r--arch/x86/boot/compressed/head_64.S311
-rw-r--r--arch/x86/boot/compressed/misc_32.c (renamed from arch/i386/boot/compressed/misc.c)0
-rw-r--r--arch/x86/boot/compressed/misc_64.c (renamed from arch/x86_64/boot/compressed/misc.c)0
-rw-r--r--arch/x86/boot/compressed/relocs.c (renamed from arch/i386/boot/compressed/relocs.c)0
-rw-r--r--arch/x86/boot/compressed/vmlinux_32.lds (renamed from arch/i386/boot/compressed/vmlinux.lds)0
-rw-r--r--arch/x86/boot/compressed/vmlinux_32.scr (renamed from arch/i386/boot/compressed/vmlinux.scr)0
-rw-r--r--arch/x86/boot/compressed/vmlinux_64.lds (renamed from arch/x86_64/boot/compressed/vmlinux.lds)0
-rw-r--r--arch/x86/boot/compressed/vmlinux_64.scr (renamed from arch/x86_64/boot/compressed/vmlinux.scr)0
-rw-r--r--arch/x86/boot/copy.S (renamed from arch/i386/boot/copy.S)0
-rw-r--r--arch/x86/boot/cpu.c (renamed from arch/i386/boot/cpu.c)0
-rw-r--r--arch/x86/boot/cpucheck.c (renamed from arch/i386/boot/cpucheck.c)0
-rw-r--r--arch/x86/boot/edd.c (renamed from arch/i386/boot/edd.c)0
-rw-r--r--arch/x86/boot/header.S (renamed from arch/i386/boot/header.S)0
-rw-r--r--arch/x86/boot/install.sh (renamed from arch/i386/boot/install.sh)0
-rw-r--r--arch/x86/boot/main.c (renamed from arch/i386/boot/main.c)0
-rw-r--r--arch/x86/boot/mca.c (renamed from arch/i386/boot/mca.c)0
-rw-r--r--arch/x86/boot/memory.c (renamed from arch/i386/boot/memory.c)0
-rw-r--r--arch/x86/boot/mtools.conf.in (renamed from arch/i386/boot/mtools.conf.in)0
-rw-r--r--arch/x86/boot/pm.c (renamed from arch/i386/boot/pm.c)0
-rw-r--r--arch/x86/boot/pmjump.S (renamed from arch/i386/boot/pmjump.S)0
-rw-r--r--arch/x86/boot/printf.c (renamed from arch/i386/boot/printf.c)0
-rw-r--r--arch/x86/boot/setup.ld (renamed from arch/i386/boot/setup.ld)0
-rw-r--r--arch/x86/boot/string.c (renamed from arch/i386/boot/string.c)0
-rw-r--r--arch/x86/boot/tools/.gitignore (renamed from arch/i386/boot/tools/.gitignore)0
-rw-r--r--arch/x86/boot/tools/build.c (renamed from arch/i386/boot/tools/build.c)0
-rw-r--r--arch/x86/boot/tty.c (renamed from arch/i386/boot/tty.c)0
-rw-r--r--arch/x86/boot/version.c (renamed from arch/i386/boot/version.c)0
-rw-r--r--arch/x86/boot/vesa.h (renamed from arch/i386/boot/vesa.h)0
-rw-r--r--arch/x86/boot/video-bios.c (renamed from arch/i386/boot/video-bios.c)0
-rw-r--r--arch/x86/boot/video-vesa.c (renamed from arch/i386/boot/video-vesa.c)0
-rw-r--r--arch/x86/boot/video-vga.c (renamed from arch/i386/boot/video-vga.c)0
-rw-r--r--arch/x86/boot/video.c (renamed from arch/i386/boot/video.c)0
-rw-r--r--arch/x86/boot/video.h (renamed from arch/i386/boot/video.h)0
-rw-r--r--arch/x86/boot/voyager.c (renamed from arch/i386/boot/voyager.c)0
-rw-r--r--arch/x86/crypto/Makefile5
-rw-r--r--arch/x86/crypto/Makefile_3212
-rw-r--r--arch/x86/crypto/Makefile_6412
-rw-r--r--arch/x86/crypto/aes-i586-asm_32.S (renamed from arch/i386/crypto/aes-i586-asm.S)0
-rw-r--r--arch/x86/crypto/aes-x86_64-asm_64.S (renamed from arch/x86_64/crypto/aes-x86_64-asm.S)0
-rw-r--r--arch/x86/crypto/aes_32.c (renamed from arch/i386/crypto/aes.c)0
-rw-r--r--arch/x86/crypto/aes_64.c (renamed from arch/x86_64/crypto/aes.c)0
-rw-r--r--arch/x86/crypto/twofish-i586-asm_32.S (renamed from arch/i386/crypto/twofish-i586-asm.S)0
-rw-r--r--arch/x86/crypto/twofish-x86_64-asm_64.S (renamed from arch/x86_64/crypto/twofish-x86_64-asm.S)0
-rw-r--r--arch/x86/crypto/twofish_32.c (renamed from arch/i386/crypto/twofish.c)0
-rw-r--r--arch/x86/crypto/twofish_64.c (renamed from arch/x86_64/crypto/twofish.c)0
-rw-r--r--arch/x86/ia32/Makefile (renamed from arch/x86_64/ia32/Makefile)0
-rw-r--r--arch/x86/ia32/audit.c42
-rw-r--r--arch/x86/ia32/fpu32.c (renamed from arch/x86_64/ia32/fpu32.c)0
-rw-r--r--arch/x86/ia32/ia32_aout.c (renamed from arch/x86_64/ia32/ia32_aout.c)0
-rw-r--r--arch/x86/ia32/ia32_binfmt.c (renamed from arch/x86_64/ia32/ia32_binfmt.c)0
-rw-r--r--arch/x86/ia32/ia32_signal.c (renamed from arch/x86_64/ia32/ia32_signal.c)0
-rw-r--r--arch/x86/ia32/ia32entry.S (renamed from arch/x86_64/ia32/ia32entry.S)0
-rw-r--r--arch/x86/ia32/ipc32.c57
-rw-r--r--arch/x86/ia32/mmap32.c (renamed from arch/x86_64/ia32/mmap32.c)0
-rw-r--r--arch/x86/ia32/ptrace32.c (renamed from arch/x86_64/ia32/ptrace32.c)0
-rw-r--r--arch/x86/ia32/sys_ia32.c (renamed from arch/x86_64/ia32/sys_ia32.c)0
-rw-r--r--arch/x86/ia32/syscall32.c (renamed from arch/x86_64/ia32/syscall32.c)0
-rw-r--r--arch/x86/ia32/syscall32_syscall.S17
-rw-r--r--arch/x86/ia32/tls32.c (renamed from arch/x86_64/ia32/tls32.c)0
-rw-r--r--arch/x86/ia32/vsyscall-sigreturn.S143
-rw-r--r--arch/x86/ia32/vsyscall-syscall.S (renamed from arch/x86_64/ia32/vsyscall-syscall.S)0
-rw-r--r--arch/x86/ia32/vsyscall-sysenter.S (renamed from arch/x86_64/ia32/vsyscall-sysenter.S)0
-rw-r--r--arch/x86/ia32/vsyscall.lds (renamed from arch/x86_64/ia32/vsyscall.lds)0
-rw-r--r--arch/x86/kernel/.gitignore (renamed from arch/i386/kernel/.gitignore)0
-rw-r--r--arch/x86/kernel/Makefile5
-rw-r--r--arch/x86/kernel/Makefile_3286
-rw-r--r--arch/x86/kernel/Makefile_6454
-rw-r--r--arch/x86/kernel/acpi/Makefile5
-rw-r--r--arch/x86/kernel/acpi/Makefile_3210
-rw-r--r--arch/x86/kernel/acpi/Makefile_647
-rw-r--r--arch/x86/kernel/acpi/boot.c (renamed from arch/i386/kernel/acpi/boot.c)0
-rw-r--r--arch/x86/kernel/acpi/cstate.c (renamed from arch/i386/kernel/acpi/cstate.c)0
-rw-r--r--arch/x86/kernel/acpi/earlyquirk_32.c (renamed from arch/i386/kernel/acpi/earlyquirk.c)0
-rw-r--r--arch/x86/kernel/acpi/processor.c (renamed from arch/i386/kernel/acpi/processor.c)0
-rw-r--r--arch/x86/kernel/acpi/sleep_32.c (renamed from arch/i386/kernel/acpi/sleep.c)0
-rw-r--r--arch/x86/kernel/acpi/sleep_64.c (renamed from arch/x86_64/kernel/acpi/sleep.c)0
-rw-r--r--arch/x86/kernel/acpi/wakeup_32.S (renamed from arch/i386/kernel/acpi/wakeup.S)0
-rw-r--r--arch/x86/kernel/acpi/wakeup_64.S456
-rw-r--r--arch/x86/kernel/alternative.c (renamed from arch/i386/kernel/alternative.c)0
-rw-r--r--arch/x86/kernel/aperture_64.c (renamed from arch/x86_64/kernel/aperture.c)0
-rw-r--r--arch/x86/kernel/apic_32.c (renamed from arch/i386/kernel/apic.c)0
-rw-r--r--arch/x86/kernel/apic_64.c (renamed from arch/x86_64/kernel/apic.c)0
-rw-r--r--arch/x86/kernel/apm_32.c (renamed from arch/i386/kernel/apm.c)0
-rw-r--r--arch/x86/kernel/asm-offsets.c5
-rw-r--r--arch/x86/kernel/asm-offsets_32.c147
-rw-r--r--arch/x86/kernel/asm-offsets_64.c (renamed from arch/x86_64/kernel/asm-offsets.c)0
-rw-r--r--arch/x86/kernel/audit_64.c (renamed from arch/x86_64/kernel/audit.c)0
-rw-r--r--arch/x86/kernel/bootflag.c (renamed from arch/i386/kernel/bootflag.c)0
-rw-r--r--arch/x86/kernel/bugs_64.c (renamed from arch/x86_64/kernel/bugs.c)0
-rw-r--r--arch/x86/kernel/cpu/Makefile (renamed from arch/i386/kernel/cpu/Makefile)0
-rw-r--r--arch/x86/kernel/cpu/addon_cpuid_features.c (renamed from arch/i386/kernel/cpu/addon_cpuid_features.c)0
-rw-r--r--arch/x86/kernel/cpu/amd.c (renamed from arch/i386/kernel/cpu/amd.c)0
-rw-r--r--arch/x86/kernel/cpu/bugs.c (renamed from arch/i386/kernel/cpu/bugs.c)0
-rw-r--r--arch/x86/kernel/cpu/centaur.c (renamed from arch/i386/kernel/cpu/centaur.c)0
-rw-r--r--arch/x86/kernel/cpu/common.c (renamed from arch/i386/kernel/cpu/common.c)0
-rw-r--r--arch/x86/kernel/cpu/cpu.h (renamed from arch/i386/kernel/cpu/cpu.h)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/Kconfig (renamed from arch/i386/kernel/cpu/cpufreq/Kconfig)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/Makefile (renamed from arch/i386/kernel/cpu/cpufreq/Makefile)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c (renamed from arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c (renamed from arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/e_powersaver.c (renamed from arch/i386/kernel/cpu/cpufreq/e_powersaver.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/elanfreq.c (renamed from arch/i386/kernel/cpu/cpufreq/elanfreq.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/gx-suspmod.c (renamed from arch/i386/kernel/cpu/cpufreq/gx-suspmod.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/longhaul.c (renamed from arch/i386/kernel/cpu/cpufreq/longhaul.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/longhaul.h (renamed from arch/i386/kernel/cpu/cpufreq/longhaul.h)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/longrun.c (renamed from arch/i386/kernel/cpu/cpufreq/longrun.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/p4-clockmod.c (renamed from arch/i386/kernel/cpu/cpufreq/p4-clockmod.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k6.c (renamed from arch/i386/kernel/cpu/cpufreq/powernow-k6.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k7.c (renamed from arch/i386/kernel/cpu/cpufreq/powernow-k7.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k7.h (renamed from arch/i386/kernel/cpu/cpufreq/powernow-k7.h)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k8.c (renamed from arch/i386/kernel/cpu/cpufreq/powernow-k8.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k8.h (renamed from arch/i386/kernel/cpu/cpufreq/powernow-k8.h)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/sc520_freq.c (renamed from arch/i386/kernel/cpu/cpufreq/sc520_freq.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c (renamed from arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/speedstep-ich.c (renamed from arch/i386/kernel/cpu/cpufreq/speedstep-ich.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/speedstep-lib.c (renamed from arch/i386/kernel/cpu/cpufreq/speedstep-lib.c)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/speedstep-lib.h (renamed from arch/i386/kernel/cpu/cpufreq/speedstep-lib.h)0
-rw-r--r--arch/x86/kernel/cpu/cpufreq/speedstep-smi.c (renamed from arch/i386/kernel/cpu/cpufreq/speedstep-smi.c)0
-rw-r--r--arch/x86/kernel/cpu/cyrix.c (renamed from arch/i386/kernel/cpu/cyrix.c)0
-rw-r--r--arch/x86/kernel/cpu/intel.c (renamed from arch/i386/kernel/cpu/intel.c)0
-rw-r--r--arch/x86/kernel/cpu/intel_cacheinfo.c (renamed from arch/i386/kernel/cpu/intel_cacheinfo.c)0
-rw-r--r--arch/x86/kernel/cpu/mcheck/Makefile (renamed from arch/i386/kernel/cpu/mcheck/Makefile)0
-rw-r--r--arch/x86/kernel/cpu/mcheck/k7.c (renamed from arch/i386/kernel/cpu/mcheck/k7.c)0
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce.c (renamed from arch/i386/kernel/cpu/mcheck/mce.c)0
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce.h (renamed from arch/i386/kernel/cpu/mcheck/mce.h)0
-rw-r--r--arch/x86/kernel/cpu/mcheck/non-fatal.c (renamed from arch/i386/kernel/cpu/mcheck/non-fatal.c)0
-rw-r--r--arch/x86/kernel/cpu/mcheck/p4.c (renamed from arch/i386/kernel/cpu/mcheck/p4.c)0
-rw-r--r--arch/x86/kernel/cpu/mcheck/p5.c (renamed from arch/i386/kernel/cpu/mcheck/p5.c)0
-rw-r--r--arch/x86/kernel/cpu/mcheck/p6.c (renamed from arch/i386/kernel/cpu/mcheck/p6.c)0
-rw-r--r--arch/x86/kernel/cpu/mcheck/therm_throt.c (renamed from arch/i386/kernel/cpu/mcheck/therm_throt.c)0
-rw-r--r--arch/x86/kernel/cpu/mcheck/winchip.c (renamed from arch/i386/kernel/cpu/mcheck/winchip.c)0
-rw-r--r--arch/x86/kernel/cpu/mtrr/Makefile (renamed from arch/i386/kernel/cpu/mtrr/Makefile)0
-rw-r--r--arch/x86/kernel/cpu/mtrr/amd.c (renamed from arch/i386/kernel/cpu/mtrr/amd.c)0
-rw-r--r--arch/x86/kernel/cpu/mtrr/centaur.c (renamed from arch/i386/kernel/cpu/mtrr/centaur.c)0
-rw-r--r--arch/x86/kernel/cpu/mtrr/cyrix.c (renamed from arch/i386/kernel/cpu/mtrr/cyrix.c)0
-rw-r--r--arch/x86/kernel/cpu/mtrr/generic.c (renamed from arch/i386/kernel/cpu/mtrr/generic.c)0
-rw-r--r--arch/x86/kernel/cpu/mtrr/if.c (renamed from arch/i386/kernel/cpu/mtrr/if.c)0
-rw-r--r--arch/x86/kernel/cpu/mtrr/main.c (renamed from arch/i386/kernel/cpu/mtrr/main.c)0
-rw-r--r--arch/x86/kernel/cpu/mtrr/mtrr.h (renamed from arch/i386/kernel/cpu/mtrr/mtrr.h)0
-rw-r--r--arch/x86/kernel/cpu/mtrr/state.c79
-rw-r--r--arch/x86/kernel/cpu/nexgen.c (renamed from arch/i386/kernel/cpu/nexgen.c)0
-rw-r--r--arch/x86/kernel/cpu/perfctr-watchdog.c (renamed from arch/i386/kernel/cpu/perfctr-watchdog.c)0
-rw-r--r--arch/x86/kernel/cpu/proc.c (renamed from arch/i386/kernel/cpu/proc.c)0
-rw-r--r--arch/x86/kernel/cpu/transmeta.c (renamed from arch/i386/kernel/cpu/transmeta.c)0
-rw-r--r--arch/x86/kernel/cpu/umc.c (renamed from arch/i386/kernel/cpu/umc.c)0
-rw-r--r--arch/x86/kernel/cpufreq/Kconfig (renamed from arch/x86_64/kernel/cpufreq/Kconfig)0
-rw-r--r--arch/x86/kernel/cpuid.c (renamed from arch/i386/kernel/cpuid.c)0
-rw-r--r--arch/x86/kernel/crash_32.c (renamed from arch/i386/kernel/crash.c)0
-rw-r--r--arch/x86/kernel/crash_64.c (renamed from arch/x86_64/kernel/crash.c)0
-rw-r--r--arch/x86/kernel/crash_dump_32.c (renamed from arch/i386/kernel/crash_dump.c)0
-rw-r--r--arch/x86/kernel/crash_dump_64.c (renamed from arch/x86_64/kernel/crash_dump.c)0
-rw-r--r--arch/x86/kernel/doublefault_32.c (renamed from arch/i386/kernel/doublefault.c)0
-rw-r--r--arch/x86/kernel/e820_32.c (renamed from arch/i386/kernel/e820.c)0
-rw-r--r--arch/x86/kernel/e820_64.c (renamed from arch/x86_64/kernel/e820.c)0
-rw-r--r--arch/x86/kernel/early-quirks_64.c (renamed from arch/x86_64/kernel/early-quirks.c)0
-rw-r--r--arch/x86/kernel/early_printk.c (renamed from arch/x86_64/kernel/early_printk.c)0
-rw-r--r--arch/x86/kernel/efi_32.c (renamed from arch/i386/kernel/efi.c)0
-rw-r--r--arch/x86/kernel/efi_stub_32.S (renamed from arch/i386/kernel/efi_stub.S)0
-rw-r--r--arch/x86/kernel/entry_32.S1112
-rw-r--r--arch/x86/kernel/entry_64.S (renamed from arch/x86_64/kernel/entry.S)0
-rw-r--r--arch/x86/kernel/genapic_64.c (renamed from arch/x86_64/kernel/genapic.c)0
-rw-r--r--arch/x86/kernel/genapic_flat_64.c (renamed from arch/x86_64/kernel/genapic_flat.c)0
-rw-r--r--arch/x86/kernel/geode_32.c (renamed from arch/i386/kernel/geode.c)0
-rw-r--r--arch/x86/kernel/head64.c (renamed from arch/x86_64/kernel/head64.c)0
-rw-r--r--arch/x86/kernel/head_32.S578
-rw-r--r--arch/x86/kernel/head_64.S (renamed from arch/x86_64/kernel/head.S)0
-rw-r--r--arch/x86/kernel/hpet_32.c (renamed from arch/i386/kernel/hpet.c)0
-rw-r--r--arch/x86/kernel/hpet_64.c (renamed from arch/x86_64/kernel/hpet.c)0
-rw-r--r--arch/x86/kernel/i386_ksyms_32.c (renamed from arch/i386/kernel/i386_ksyms.c)0
-rw-r--r--arch/x86/kernel/i387_32.c (renamed from arch/i386/kernel/i387.c)0
-rw-r--r--arch/x86/kernel/i387_64.c (renamed from arch/x86_64/kernel/i387.c)0
-rw-r--r--arch/x86/kernel/i8237.c (renamed from arch/i386/kernel/i8237.c)0
-rw-r--r--arch/x86/kernel/i8253_32.c (renamed from arch/i386/kernel/i8253.c)0
-rw-r--r--arch/x86/kernel/i8259_32.c (renamed from arch/i386/kernel/i8259.c)0
-rw-r--r--arch/x86/kernel/i8259_64.c (renamed from arch/x86_64/kernel/i8259.c)0
-rw-r--r--arch/x86/kernel/init_task_32.c (renamed from arch/i386/kernel/init_task.c)0
-rw-r--r--arch/x86/kernel/init_task_64.c (renamed from arch/x86_64/kernel/init_task.c)0
-rw-r--r--arch/x86/kernel/io_apic_32.c (renamed from arch/i386/kernel/io_apic.c)0
-rw-r--r--arch/x86/kernel/io_apic_64.c (renamed from arch/x86_64/kernel/io_apic.c)0
-rw-r--r--arch/x86/kernel/ioport_32.c (renamed from arch/i386/kernel/ioport.c)0
-rw-r--r--arch/x86/kernel/ioport_64.c (renamed from arch/x86_64/kernel/ioport.c)0
-rw-r--r--arch/x86/kernel/irq_32.c (renamed from arch/i386/kernel/irq.c)0
-rw-r--r--arch/x86/kernel/irq_64.c (renamed from arch/x86_64/kernel/irq.c)0
-rw-r--r--arch/x86/kernel/k8.c (renamed from arch/x86_64/kernel/k8.c)0
-rw-r--r--arch/x86/kernel/kprobes_32.c (renamed from arch/i386/kernel/kprobes.c)0
-rw-r--r--arch/x86/kernel/kprobes_64.c (renamed from arch/x86_64/kernel/kprobes.c)0
-rw-r--r--arch/x86/kernel/ldt_32.c (renamed from arch/i386/kernel/ldt.c)0
-rw-r--r--arch/x86/kernel/ldt_64.c (renamed from arch/x86_64/kernel/ldt.c)0
-rw-r--r--arch/x86/kernel/machine_kexec_32.c (renamed from arch/i386/kernel/machine_kexec.c)0
-rw-r--r--arch/x86/kernel/machine_kexec_64.c (renamed from arch/x86_64/kernel/machine_kexec.c)0
-rw-r--r--arch/x86/kernel/mca_32.c (renamed from arch/i386/kernel/mca.c)0
-rw-r--r--arch/x86/kernel/mce_64.c (renamed from arch/x86_64/kernel/mce.c)0
-rw-r--r--arch/x86/kernel/mce_amd_64.c (renamed from arch/x86_64/kernel/mce_amd.c)0
-rw-r--r--arch/x86/kernel/mce_intel_64.c (renamed from arch/x86_64/kernel/mce_intel.c)0
-rw-r--r--arch/x86/kernel/microcode.c (renamed from arch/i386/kernel/microcode.c)0
-rw-r--r--arch/x86/kernel/module_32.c (renamed from arch/i386/kernel/module.c)0
-rw-r--r--arch/x86/kernel/module_64.c (renamed from arch/x86_64/kernel/module.c)0
-rw-r--r--arch/x86/kernel/mpparse_32.c (renamed from arch/i386/kernel/mpparse.c)0
-rw-r--r--arch/x86/kernel/mpparse_64.c (renamed from arch/x86_64/kernel/mpparse.c)0
-rw-r--r--arch/x86/kernel/msr.c (renamed from arch/i386/kernel/msr.c)0
-rw-r--r--arch/x86/kernel/nmi_32.c (renamed from arch/i386/kernel/nmi.c)0
-rw-r--r--arch/x86/kernel/nmi_64.c (renamed from arch/x86_64/kernel/nmi.c)0
-rw-r--r--arch/x86/kernel/numaq_32.c (renamed from arch/i386/kernel/numaq.c)0
-rw-r--r--arch/x86/kernel/paravirt_32.c (renamed from arch/i386/kernel/paravirt.c)0
-rw-r--r--arch/x86/kernel/pci-calgary_64.c (renamed from arch/x86_64/kernel/pci-calgary.c)0
-rw-r--r--arch/x86/kernel/pci-dma_32.c (renamed from arch/i386/kernel/pci-dma.c)0
-rw-r--r--arch/x86/kernel/pci-dma_64.c (renamed from arch/x86_64/kernel/pci-dma.c)0
-rw-r--r--arch/x86/kernel/pci-gart_64.c (renamed from arch/x86_64/kernel/pci-gart.c)0
-rw-r--r--arch/x86/kernel/pci-nommu_64.c (renamed from arch/x86_64/kernel/pci-nommu.c)0
-rw-r--r--arch/x86/kernel/pci-swiotlb_64.c (renamed from arch/x86_64/kernel/pci-swiotlb.c)0
-rw-r--r--arch/x86/kernel/pcspeaker.c (renamed from arch/i386/kernel/pcspeaker.c)0
-rw-r--r--arch/x86/kernel/pmtimer_64.c (renamed from arch/x86_64/kernel/pmtimer.c)0
-rw-r--r--arch/x86/kernel/process_32.c (renamed from arch/i386/kernel/process.c)0
-rw-r--r--arch/x86/kernel/process_64.c (renamed from arch/x86_64/kernel/process.c)0
-rw-r--r--arch/x86/kernel/ptrace_32.c (renamed from arch/i386/kernel/ptrace.c)0
-rw-r--r--arch/x86/kernel/ptrace_64.c (renamed from arch/x86_64/kernel/ptrace.c)0
-rw-r--r--arch/x86/kernel/quirks.c (renamed from arch/i386/kernel/quirks.c)0
-rw-r--r--arch/x86/kernel/reboot_32.c (renamed from arch/i386/kernel/reboot.c)0
-rw-r--r--arch/x86/kernel/reboot_64.c (renamed from arch/x86_64/kernel/reboot.c)0
-rw-r--r--arch/x86/kernel/reboot_fixups_32.c (renamed from arch/i386/kernel/reboot_fixups.c)0
-rw-r--r--arch/x86/kernel/relocate_kernel_32.S (renamed from arch/i386/kernel/relocate_kernel.S)0
-rw-r--r--arch/x86/kernel/relocate_kernel_64.S (renamed from arch/x86_64/kernel/relocate_kernel.S)0
-rw-r--r--arch/x86/kernel/scx200_32.c (renamed from arch/i386/kernel/scx200.c)0
-rw-r--r--arch/x86/kernel/setup64.c (renamed from arch/x86_64/kernel/setup64.c)0
-rw-r--r--arch/x86/kernel/setup_32.c (renamed from arch/i386/kernel/setup.c)0
-rw-r--r--arch/x86/kernel/setup_64.c (renamed from arch/x86_64/kernel/setup.c)0
-rw-r--r--arch/x86/kernel/sigframe_32.h (renamed from arch/i386/kernel/sigframe.h)0
-rw-r--r--arch/x86/kernel/signal_32.c667
-rw-r--r--arch/x86/kernel/signal_64.c (renamed from arch/x86_64/kernel/signal.c)0
-rw-r--r--arch/x86/kernel/smp_32.c (renamed from arch/i386/kernel/smp.c)0
-rw-r--r--arch/x86/kernel/smp_64.c (renamed from arch/x86_64/kernel/smp.c)0
-rw-r--r--arch/x86/kernel/smpboot_32.c (renamed from arch/i386/kernel/smpboot.c)0
-rw-r--r--arch/x86/kernel/smpboot_64.c (renamed from arch/x86_64/kernel/smpboot.c)0
-rw-r--r--arch/x86/kernel/smpcommon_32.c (renamed from arch/i386/kernel/smpcommon.c)0
-rw-r--r--arch/x86/kernel/srat_32.c (renamed from arch/i386/kernel/srat.c)0
-rw-r--r--arch/x86/kernel/stacktrace.c (renamed from arch/x86_64/kernel/stacktrace.c)0
-rw-r--r--arch/x86/kernel/summit_32.c (renamed from arch/i386/kernel/summit.c)0
-rw-r--r--arch/x86/kernel/suspend_64.c (renamed from arch/x86_64/kernel/suspend.c)0
-rw-r--r--arch/x86/kernel/suspend_asm_64.S (renamed from arch/x86_64/kernel/suspend_asm.S)0
-rw-r--r--arch/x86/kernel/sys_i386_32.c (renamed from arch/i386/kernel/sys_i386.c)0
-rw-r--r--arch/x86/kernel/sys_x86_64.c (renamed from arch/x86_64/kernel/sys_x86_64.c)0
-rw-r--r--arch/x86/kernel/syscall_64.c26
-rw-r--r--arch/x86/kernel/syscall_table_32.S (renamed from arch/i386/kernel/syscall_table.S)0
-rw-r--r--arch/x86/kernel/sysenter_32.c (renamed from arch/i386/kernel/sysenter.c)0
-rw-r--r--arch/x86/kernel/tce_64.c (renamed from arch/x86_64/kernel/tce.c)0
-rw-r--r--arch/x86/kernel/time_32.c (renamed from arch/i386/kernel/time.c)0
-rw-r--r--arch/x86/kernel/time_64.c (renamed from arch/x86_64/kernel/time.c)0
-rw-r--r--arch/x86/kernel/topology.c (renamed from arch/i386/kernel/topology.c)0
-rw-r--r--arch/x86/kernel/trampoline_32.S (renamed from arch/i386/kernel/trampoline.S)0
-rw-r--r--arch/x86/kernel/trampoline_64.S166
-rw-r--r--arch/x86/kernel/traps_32.c (renamed from arch/i386/kernel/traps.c)0
-rw-r--r--arch/x86/kernel/traps_64.c (renamed from arch/x86_64/kernel/traps.c)0
-rw-r--r--arch/x86/kernel/tsc_32.c (renamed from arch/i386/kernel/tsc.c)0
-rw-r--r--arch/x86/kernel/tsc_64.c (renamed from arch/x86_64/kernel/tsc.c)0
-rw-r--r--arch/x86/kernel/tsc_sync.c (renamed from arch/x86_64/kernel/tsc_sync.c)0
-rw-r--r--arch/x86/kernel/verify_cpu_64.S (renamed from arch/x86_64/kernel/verify_cpu.S)0
-rw-r--r--arch/x86/kernel/vm86_32.c (renamed from arch/i386/kernel/vm86.c)0
-rw-r--r--arch/x86/kernel/vmi_32.c (renamed from arch/i386/kernel/vmi.c)0
-rw-r--r--arch/x86/kernel/vmiclock_32.c (renamed from arch/i386/kernel/vmiclock.c)0
-rw-r--r--arch/x86/kernel/vmlinux.lds.S5
-rw-r--r--arch/x86/kernel/vmlinux_32.lds.S (renamed from arch/i386/kernel/vmlinux.lds.S)0
-rw-r--r--arch/x86/kernel/vmlinux_64.lds.S (renamed from arch/x86_64/kernel/vmlinux.lds.S)0
-rw-r--r--arch/x86/kernel/vsmp_64.c (renamed from arch/x86_64/kernel/vsmp.c)0
-rw-r--r--arch/x86/kernel/vsyscall-int80_32.S53
-rw-r--r--arch/x86/kernel/vsyscall-note_32.S45
-rw-r--r--arch/x86/kernel/vsyscall-sigreturn_32.S (renamed from arch/i386/kernel/vsyscall-sigreturn.S)0
-rw-r--r--arch/x86/kernel/vsyscall-sysenter_32.S122
-rw-r--r--arch/x86/kernel/vsyscall_32.S15
-rw-r--r--arch/x86/kernel/vsyscall_32.lds.S (renamed from arch/i386/kernel/vsyscall.lds.S)0
-rw-r--r--arch/x86/kernel/vsyscall_64.c (renamed from arch/x86_64/kernel/vsyscall.c)0
-rw-r--r--arch/x86/kernel/x8664_ksyms_64.c (renamed from arch/x86_64/kernel/x8664_ksyms.c)0
-rw-r--r--arch/x86/lib/Makefile5
-rw-r--r--arch/x86/lib/Makefile_3211
-rw-r--r--arch/x86/lib/Makefile_6413
-rw-r--r--arch/x86/lib/bitops_32.c (renamed from arch/i386/lib/bitops.c)0
-rw-r--r--arch/x86/lib/bitops_64.c (renamed from arch/x86_64/lib/bitops.c)0
-rw-r--r--arch/x86/lib/bitstr_64.c (renamed from arch/x86_64/lib/bitstr.c)0
-rw-r--r--arch/x86/lib/checksum_32.S (renamed from arch/i386/lib/checksum.S)0
-rw-r--r--arch/x86/lib/clear_page_64.S (renamed from arch/x86_64/lib/clear_page.S)0
-rw-r--r--arch/x86/lib/copy_page_64.S (renamed from arch/x86_64/lib/copy_page.S)0
-rw-r--r--arch/x86/lib/copy_user_64.S (renamed from arch/x86_64/lib/copy_user.S)0
-rw-r--r--arch/x86/lib/copy_user_nocache_64.S (renamed from arch/x86_64/lib/copy_user_nocache.S)0
-rw-r--r--arch/x86/lib/csum-copy_64.S (renamed from arch/x86_64/lib/csum-copy.S)0
-rw-r--r--arch/x86/lib/csum-partial_64.c (renamed from arch/x86_64/lib/csum-partial.c)0
-rw-r--r--arch/x86/lib/csum-wrappers_64.c (renamed from arch/x86_64/lib/csum-wrappers.c)0
-rw-r--r--arch/x86/lib/delay_32.c (renamed from arch/i386/lib/delay.c)0
-rw-r--r--arch/x86/lib/delay_64.c (renamed from arch/x86_64/lib/delay.c)0
-rw-r--r--arch/x86/lib/getuser_32.S (renamed from arch/i386/lib/getuser.S)0
-rw-r--r--arch/x86/lib/getuser_64.S (renamed from arch/x86_64/lib/getuser.S)0
-rw-r--r--arch/x86/lib/io_64.c (renamed from arch/x86_64/lib/io.c)0
-rw-r--r--arch/x86/lib/iomap_copy_64.S (renamed from arch/x86_64/lib/iomap_copy.S)0
-rw-r--r--arch/x86/lib/memcpy_32.c (renamed from arch/i386/lib/memcpy.c)0
-rw-r--r--arch/x86/lib/memcpy_64.S (renamed from arch/x86_64/lib/memcpy.S)0
-rw-r--r--arch/x86/lib/memmove_64.c (renamed from arch/x86_64/lib/memmove.c)0
-rw-r--r--arch/x86/lib/memset_64.S (renamed from arch/x86_64/lib/memset.S)0
-rw-r--r--arch/x86/lib/mmx_32.c (renamed from arch/i386/lib/mmx.c)0
-rw-r--r--arch/x86/lib/msr-on-cpu.c (renamed from arch/i386/lib/msr-on-cpu.c)0
-rw-r--r--arch/x86/lib/putuser_32.S (renamed from arch/i386/lib/putuser.S)0
-rw-r--r--arch/x86/lib/putuser_64.S (renamed from arch/x86_64/lib/putuser.S)0
-rw-r--r--arch/x86/lib/rwlock_64.S (renamed from arch/x86_64/lib/rwlock.S)0
-rw-r--r--arch/x86/lib/semaphore_32.S (renamed from arch/i386/lib/semaphore.S)0
-rw-r--r--arch/x86/lib/string_32.c (renamed from arch/i386/lib/string.c)0
-rw-r--r--arch/x86/lib/strstr_32.c (renamed from arch/i386/lib/strstr.c)0
-rw-r--r--arch/x86/lib/thunk_64.S (renamed from arch/x86_64/lib/thunk.S)0
-rw-r--r--arch/x86/lib/usercopy_32.c (renamed from arch/i386/lib/usercopy.c)0
-rw-r--r--arch/x86/lib/usercopy_64.c (renamed from arch/x86_64/lib/usercopy.c)0
-rw-r--r--arch/x86/mach-default/Makefile (renamed from arch/i386/mach-default/Makefile)0
-rw-r--r--arch/x86/mach-default/setup.c (renamed from arch/i386/mach-default/setup.c)0
-rw-r--r--arch/x86/mach-es7000/Makefile (renamed from arch/i386/mach-es7000/Makefile)0
-rw-r--r--arch/x86/mach-es7000/es7000.h (renamed from arch/i386/mach-es7000/es7000.h)0
-rw-r--r--arch/x86/mach-es7000/es7000plat.c (renamed from arch/i386/mach-es7000/es7000plat.c)0
-rw-r--r--arch/x86/mach-generic/Makefile8
-rw-r--r--arch/x86/mach-generic/bigsmp.c (renamed from arch/i386/mach-generic/bigsmp.c)0
-rw-r--r--arch/x86/mach-generic/default.c (renamed from arch/i386/mach-generic/default.c)0
-rw-r--r--arch/x86/mach-generic/es7000.c (renamed from arch/i386/mach-generic/es7000.c)0
-rw-r--r--arch/x86/mach-generic/probe.c (renamed from arch/i386/mach-generic/probe.c)0
-rw-r--r--arch/x86/mach-generic/summit.c (renamed from arch/i386/mach-generic/summit.c)0
-rw-r--r--arch/x86/mach-visws/Makefile (renamed from arch/i386/mach-visws/Makefile)0
-rw-r--r--arch/x86/mach-visws/mpparse.c (renamed from arch/i386/mach-visws/mpparse.c)0
-rw-r--r--arch/x86/mach-visws/reboot.c (renamed from arch/i386/mach-visws/reboot.c)0
-rw-r--r--arch/x86/mach-visws/setup.c (renamed from arch/i386/mach-visws/setup.c)0
-rw-r--r--arch/x86/mach-visws/traps.c (renamed from arch/i386/mach-visws/traps.c)0
-rw-r--r--arch/x86/mach-visws/visws_apic.c (renamed from arch/i386/mach-visws/visws_apic.c)0
-rw-r--r--arch/x86/mach-voyager/Makefile8
-rw-r--r--arch/x86/mach-voyager/setup.c (renamed from arch/i386/mach-voyager/setup.c)0
-rw-r--r--arch/x86/mach-voyager/voyager_basic.c (renamed from arch/i386/mach-voyager/voyager_basic.c)0
-rw-r--r--arch/x86/mach-voyager/voyager_cat.c (renamed from arch/i386/mach-voyager/voyager_cat.c)0
-rw-r--r--arch/x86/mach-voyager/voyager_smp.c (renamed from arch/i386/mach-voyager/voyager_smp.c)0
-rw-r--r--arch/x86/mach-voyager/voyager_thread.c (renamed from arch/i386/mach-voyager/voyager_thread.c)0
-rw-r--r--arch/x86/math-emu/Makefile (renamed from arch/i386/math-emu/Makefile)0
-rw-r--r--arch/x86/math-emu/README (renamed from arch/i386/math-emu/README)0
-rw-r--r--arch/x86/math-emu/control_w.h (renamed from arch/i386/math-emu/control_w.h)0
-rw-r--r--arch/x86/math-emu/div_Xsig.S (renamed from arch/i386/math-emu/div_Xsig.S)0
-rw-r--r--arch/x86/math-emu/div_small.S (renamed from arch/i386/math-emu/div_small.S)0
-rw-r--r--arch/x86/math-emu/errors.c (renamed from arch/i386/math-emu/errors.c)0
-rw-r--r--arch/x86/math-emu/exception.h (renamed from arch/i386/math-emu/exception.h)0
-rw-r--r--arch/x86/math-emu/fpu_arith.c (renamed from arch/i386/math-emu/fpu_arith.c)0
-rw-r--r--arch/x86/math-emu/fpu_asm.h (renamed from arch/i386/math-emu/fpu_asm.h)0
-rw-r--r--arch/x86/math-emu/fpu_aux.c (renamed from arch/i386/math-emu/fpu_aux.c)0
-rw-r--r--arch/x86/math-emu/fpu_emu.h (renamed from arch/i386/math-emu/fpu_emu.h)0
-rw-r--r--arch/x86/math-emu/fpu_entry.c (renamed from arch/i386/math-emu/fpu_entry.c)0
-rw-r--r--arch/x86/math-emu/fpu_etc.c (renamed from arch/i386/math-emu/fpu_etc.c)0
-rw-r--r--arch/x86/math-emu/fpu_proto.h (renamed from arch/i386/math-emu/fpu_proto.h)0
-rw-r--r--arch/x86/math-emu/fpu_system.h (renamed from arch/i386/math-emu/fpu_system.h)0
-rw-r--r--arch/x86/math-emu/fpu_tags.c (renamed from arch/i386/math-emu/fpu_tags.c)0
-rw-r--r--arch/x86/math-emu/fpu_trig.c (renamed from arch/i386/math-emu/fpu_trig.c)0
-rw-r--r--arch/x86/math-emu/get_address.c (renamed from arch/i386/math-emu/get_address.c)0
-rw-r--r--arch/x86/math-emu/load_store.c (renamed from arch/i386/math-emu/load_store.c)0
-rw-r--r--arch/x86/math-emu/mul_Xsig.S (renamed from arch/i386/math-emu/mul_Xsig.S)0
-rw-r--r--arch/x86/math-emu/poly.h (renamed from arch/i386/math-emu/poly.h)0
-rw-r--r--arch/x86/math-emu/poly_2xm1.c (renamed from arch/i386/math-emu/poly_2xm1.c)0
-rw-r--r--arch/x86/math-emu/poly_atan.c (renamed from arch/i386/math-emu/poly_atan.c)0
-rw-r--r--arch/x86/math-emu/poly_l2.c (renamed from arch/i386/math-emu/poly_l2.c)0
-rw-r--r--arch/x86/math-emu/poly_sin.c (renamed from arch/i386/math-emu/poly_sin.c)0
-rw-r--r--arch/x86/math-emu/poly_tan.c (renamed from arch/i386/math-emu/poly_tan.c)0
-rw-r--r--arch/x86/math-emu/polynom_Xsig.S (renamed from arch/i386/math-emu/polynom_Xsig.S)0
-rw-r--r--arch/x86/math-emu/reg_add_sub.c (renamed from arch/i386/math-emu/reg_add_sub.c)0
-rw-r--r--arch/x86/math-emu/reg_compare.c (renamed from arch/i386/math-emu/reg_compare.c)0
-rw-r--r--arch/x86/math-emu/reg_constant.c (renamed from arch/i386/math-emu/reg_constant.c)0
-rw-r--r--arch/x86/math-emu/reg_constant.h (renamed from arch/i386/math-emu/reg_constant.h)0
-rw-r--r--arch/x86/math-emu/reg_convert.c (renamed from arch/i386/math-emu/reg_convert.c)0
-rw-r--r--arch/x86/math-emu/reg_divide.c (renamed from arch/i386/math-emu/reg_divide.c)0
-rw-r--r--arch/x86/math-emu/reg_ld_str.c (renamed from arch/i386/math-emu/reg_ld_str.c)0
-rw-r--r--arch/x86/math-emu/reg_mul.c (renamed from arch/i386/math-emu/reg_mul.c)0
-rw-r--r--arch/x86/math-emu/reg_norm.S (renamed from arch/i386/math-emu/reg_norm.S)0
-rw-r--r--arch/x86/math-emu/reg_round.S (renamed from arch/i386/math-emu/reg_round.S)0
-rw-r--r--arch/x86/math-emu/reg_u_add.S (renamed from arch/i386/math-emu/reg_u_add.S)0
-rw-r--r--arch/x86/math-emu/reg_u_div.S (renamed from arch/i386/math-emu/reg_u_div.S)0
-rw-r--r--arch/x86/math-emu/reg_u_mul.S (renamed from arch/i386/math-emu/reg_u_mul.S)0
-rw-r--r--arch/x86/math-emu/reg_u_sub.S (renamed from arch/i386/math-emu/reg_u_sub.S)0
-rw-r--r--arch/x86/math-emu/round_Xsig.S (renamed from arch/i386/math-emu/round_Xsig.S)0
-rw-r--r--arch/x86/math-emu/shr_Xsig.S (renamed from arch/i386/math-emu/shr_Xsig.S)0
-rw-r--r--arch/x86/math-emu/status_w.h (renamed from arch/i386/math-emu/status_w.h)0
-rw-r--r--arch/x86/math-emu/version.h (renamed from arch/i386/math-emu/version.h)0
-rw-r--r--arch/x86/math-emu/wm_shrx.S (renamed from arch/i386/math-emu/wm_shrx.S)0
-rw-r--r--arch/x86/math-emu/wm_sqrt.S (renamed from arch/i386/math-emu/wm_sqrt.S)0
-rw-r--r--arch/x86/mm/Makefile5
-rw-r--r--arch/x86/mm/Makefile_3210
-rw-r--r--arch/x86/mm/Makefile_6410
-rw-r--r--arch/x86/mm/boot_ioremap_32.c (renamed from arch/i386/mm/boot_ioremap.c)0
-rw-r--r--arch/x86/mm/discontig_32.c (renamed from arch/i386/mm/discontig.c)0
-rw-r--r--arch/x86/mm/extable_32.c (renamed from arch/i386/mm/extable.c)0
-rw-r--r--arch/x86/mm/extable_64.c (renamed from arch/x86_64/mm/extable.c)0
-rw-r--r--arch/x86/mm/fault_32.c (renamed from arch/i386/mm/fault.c)0
-rw-r--r--arch/x86/mm/fault_64.c (renamed from arch/x86_64/mm/fault.c)0
-rw-r--r--arch/x86/mm/highmem_32.c (renamed from arch/i386/mm/highmem.c)0
-rw-r--r--arch/x86/mm/hugetlbpage.c (renamed from arch/i386/mm/hugetlbpage.c)0
-rw-r--r--arch/x86/mm/init_32.c (renamed from arch/i386/mm/init.c)0
-rw-r--r--arch/x86/mm/init_64.c (renamed from arch/x86_64/mm/init.c)0
-rw-r--r--arch/x86/mm/ioremap_32.c (renamed from arch/i386/mm/ioremap.c)0
-rw-r--r--arch/x86/mm/ioremap_64.c (renamed from arch/x86_64/mm/ioremap.c)0
-rw-r--r--arch/x86/mm/k8topology_64.c (renamed from arch/x86_64/mm/k8topology.c)0
-rw-r--r--arch/x86/mm/mmap_32.c (renamed from arch/i386/mm/mmap.c)0
-rw-r--r--arch/x86/mm/mmap_64.c (renamed from arch/x86_64/mm/mmap.c)0
-rw-r--r--arch/x86/mm/numa_64.c (renamed from arch/x86_64/mm/numa.c)0
-rw-r--r--arch/x86/mm/pageattr_32.c (renamed from arch/i386/mm/pageattr.c)0
-rw-r--r--arch/x86/mm/pageattr_64.c (renamed from arch/x86_64/mm/pageattr.c)0
-rw-r--r--arch/x86/mm/pgtable_32.c (renamed from arch/i386/mm/pgtable.c)0
-rw-r--r--arch/x86/mm/srat_64.c (renamed from arch/x86_64/mm/srat.c)0
-rw-r--r--arch/x86/oprofile/Kconfig (renamed from arch/i386/oprofile/Kconfig)0
-rw-r--r--arch/x86/oprofile/Makefile (renamed from arch/i386/oprofile/Makefile)0
-rw-r--r--arch/x86/oprofile/backtrace.c (renamed from arch/i386/oprofile/backtrace.c)0
-rw-r--r--arch/x86/oprofile/init.c (renamed from arch/i386/oprofile/init.c)0
-rw-r--r--arch/x86/oprofile/nmi_int.c (renamed from arch/i386/oprofile/nmi_int.c)0
-rw-r--r--arch/x86/oprofile/nmi_timer_int.c (renamed from arch/i386/oprofile/nmi_timer_int.c)0
-rw-r--r--arch/x86/oprofile/op_counter.h (renamed from arch/i386/oprofile/op_counter.h)0
-rw-r--r--arch/x86/oprofile/op_model_athlon.c (renamed from arch/i386/oprofile/op_model_athlon.c)0
-rw-r--r--arch/x86/oprofile/op_model_p4.c (renamed from arch/i386/oprofile/op_model_p4.c)0
-rw-r--r--arch/x86/oprofile/op_model_ppro.c (renamed from arch/i386/oprofile/op_model_ppro.c)0
-rw-r--r--arch/x86/oprofile/op_x86_model.h (renamed from arch/i386/oprofile/op_x86_model.h)0
-rw-r--r--arch/x86/pci/Makefile5
-rw-r--r--arch/x86/pci/Makefile_3214
-rw-r--r--arch/x86/pci/Makefile_6417
-rw-r--r--arch/x86/pci/acpi.c (renamed from arch/i386/pci/acpi.c)0
-rw-r--r--arch/x86/pci/common.c (renamed from arch/i386/pci/common.c)0
-rw-r--r--arch/x86/pci/direct.c (renamed from arch/i386/pci/direct.c)0
-rw-r--r--arch/x86/pci/early.c (renamed from arch/i386/pci/early.c)0
-rw-r--r--arch/x86/pci/fixup.c (renamed from arch/i386/pci/fixup.c)0
-rw-r--r--arch/x86/pci/i386.c (renamed from arch/i386/pci/i386.c)0
-rw-r--r--arch/x86/pci/init.c (renamed from arch/i386/pci/init.c)0
-rw-r--r--arch/x86/pci/irq.c (renamed from arch/i386/pci/irq.c)0
-rw-r--r--arch/x86/pci/k8-bus_64.c (renamed from arch/x86_64/pci/k8-bus.c)0
-rw-r--r--arch/x86/pci/legacy.c (renamed from arch/i386/pci/legacy.c)0
-rw-r--r--arch/x86/pci/mmconfig-shared.c (renamed from arch/i386/pci/mmconfig-shared.c)0
-rw-r--r--arch/x86/pci/mmconfig_32.c (renamed from arch/i386/pci/mmconfig.c)0
-rw-r--r--arch/x86/pci/mmconfig_64.c (renamed from arch/x86_64/pci/mmconfig.c)0
-rw-r--r--arch/x86/pci/numa.c (renamed from arch/i386/pci/numa.c)0
-rw-r--r--arch/x86/pci/pcbios.c (renamed from arch/i386/pci/pcbios.c)0
-rw-r--r--arch/x86/pci/pci.h (renamed from arch/i386/pci/pci.h)0
-rw-r--r--arch/x86/pci/visws.c (renamed from arch/i386/pci/visws.c)0
-rw-r--r--arch/x86/power/Makefile (renamed from arch/i386/power/Makefile)0
-rw-r--r--arch/x86/power/cpu.c (renamed from arch/i386/power/cpu.c)0
-rw-r--r--arch/x86/power/suspend.c (renamed from arch/i386/power/suspend.c)0
-rw-r--r--arch/x86/power/swsusp.S (renamed from arch/i386/power/swsusp.S)0
-rw-r--r--arch/x86/vdso/.gitignore (renamed from arch/x86_64/vdso/.gitignore)0
-rw-r--r--arch/x86/vdso/Makefile (renamed from arch/x86_64/vdso/Makefile)0
-rw-r--r--arch/x86/vdso/vclock_gettime.c (renamed from arch/x86_64/vdso/vclock_gettime.c)0
-rw-r--r--arch/x86/vdso/vdso-note.S (renamed from arch/x86_64/vdso/vdso-note.S)0
-rw-r--r--arch/x86/vdso/vdso-start.S (renamed from arch/x86_64/vdso/vdso-start.S)0
-rw-r--r--arch/x86/vdso/vdso.S2
-rw-r--r--arch/x86/vdso/vdso.lds.S (renamed from arch/x86_64/vdso/vdso.lds.S)0
-rw-r--r--arch/x86/vdso/vextern.h (renamed from arch/x86_64/vdso/vextern.h)0
-rw-r--r--arch/x86/vdso/vgetcpu.c (renamed from arch/x86_64/vdso/vgetcpu.c)0
-rw-r--r--arch/x86/vdso/vma.c (renamed from arch/x86_64/vdso/vma.c)0
-rw-r--r--arch/x86/vdso/voffset.h (renamed from arch/x86_64/vdso/voffset.h)0
-rw-r--r--arch/x86/vdso/vvar.c (renamed from arch/x86_64/vdso/vvar.c)0
-rw-r--r--arch/x86/video/Makefile (renamed from arch/i386/video/Makefile)0
-rw-r--r--arch/x86/video/fbdev.c (renamed from arch/i386/video/fbdev.c)0
-rw-r--r--arch/x86/xen/Kconfig (renamed from arch/i386/xen/Kconfig)0
-rw-r--r--arch/x86/xen/Makefile (renamed from arch/i386/xen/Makefile)0
-rw-r--r--arch/x86/xen/enlighten.c (renamed from arch/i386/xen/enlighten.c)0
-rw-r--r--arch/x86/xen/events.c (renamed from arch/i386/xen/events.c)0
-rw-r--r--arch/x86/xen/features.c (renamed from arch/i386/xen/features.c)0
-rw-r--r--arch/x86/xen/manage.c (renamed from arch/i386/xen/manage.c)0
-rw-r--r--arch/x86/xen/mmu.c (renamed from arch/i386/xen/mmu.c)0
-rw-r--r--arch/x86/xen/mmu.h (renamed from arch/i386/xen/mmu.h)0
-rw-r--r--arch/x86/xen/multicalls.c (renamed from arch/i386/xen/multicalls.c)0
-rw-r--r--arch/x86/xen/multicalls.h (renamed from arch/i386/xen/multicalls.h)0
-rw-r--r--arch/x86/xen/setup.c (renamed from arch/i386/xen/setup.c)0
-rw-r--r--arch/x86/xen/smp.c (renamed from arch/i386/xen/smp.c)0
-rw-r--r--arch/x86/xen/time.c (renamed from arch/i386/xen/time.c)0
-rw-r--r--arch/x86/xen/vdso.h (renamed from arch/i386/xen/vdso.h)0
-rw-r--r--arch/x86/xen/xen-asm.S (renamed from arch/i386/xen/xen-asm.S)0
-rw-r--r--arch/x86/xen/xen-head.S (renamed from arch/i386/xen/xen-head.S)0
-rw-r--r--arch/x86/xen/xen-ops.h (renamed from arch/i386/xen/xen-ops.h)0
-rw-r--r--arch/x86_64/Kconfig4
-rw-r--r--arch/x86_64/Makefile28
-rw-r--r--arch/x86_64/boot/.gitignore5
-rw-r--r--arch/x86_64/boot/Makefile9
-rw-r--r--arch/x86_64/boot/compressed/Makefile30
-rw-r--r--arch/x86_64/boot/compressed/head.S311
-rw-r--r--arch/x86_64/boot/tools/.gitignore1
-rw-r--r--arch/x86_64/crypto/Makefile12
-rw-r--r--arch/x86_64/ia32/audit.c42
-rw-r--r--arch/x86_64/ia32/ipc32.c57
-rw-r--r--arch/x86_64/ia32/syscall32_syscall.S17
-rw-r--r--arch/x86_64/ia32/vsyscall-sigreturn.S143
-rw-r--r--arch/x86_64/kernel/Makefile63
-rw-r--r--arch/x86_64/kernel/acpi/Makefile9
-rw-r--r--arch/x86_64/kernel/acpi/wakeup.S456
-rw-r--r--arch/x86_64/kernel/cpufreq/Makefile17
-rw-r--r--arch/x86_64/kernel/syscall.c26
-rw-r--r--arch/x86_64/kernel/trampoline.S166
-rw-r--r--arch/x86_64/lib/Makefile13
-rw-r--r--arch/x86_64/lib/msr-on-cpu.c1
-rw-r--r--arch/x86_64/mm/Makefile11
-rw-r--r--arch/x86_64/oprofile/Kconfig17
-rw-r--r--arch/x86_64/oprofile/Makefile19
-rw-r--r--arch/x86_64/pci/Makefile27
-rw-r--r--arch/x86_64/vdso/vdso.S2
-rw-r--r--drivers/media/Kconfig70
-rw-r--r--drivers/media/common/Kconfig2
-rw-r--r--drivers/media/common/ir-functions.c1
-rw-r--r--drivers/media/common/ir-keymaps.c62
-rw-r--r--drivers/media/common/saa7146_core.c34
-rw-r--r--drivers/media/common/saa7146_fops.c5
-rw-r--r--drivers/media/common/saa7146_i2c.c23
-rw-r--r--drivers/media/common/saa7146_vbi.c9
-rw-r--r--drivers/media/common/saa7146_video.c11
-rw-r--r--drivers/media/dvb/bt8xx/bt878.c1
-rw-r--r--drivers/media/dvb/bt8xx/bt878.h7
-rw-r--r--drivers/media/dvb/bt8xx/dvb-bt8xx.c1
-rw-r--r--drivers/media/dvb/cinergyT2/cinergyT2.c8
-rw-r--r--drivers/media/dvb/dvb-core/dmxdev.c1
-rw-r--r--drivers/media/dvb/dvb-core/dvb_ca_en50221.c93
-rw-r--r--drivers/media/dvb/dvb-core/dvb_demux.c5
-rw-r--r--drivers/media/dvb/dvb-core/dvb_frontend.c125
-rw-r--r--drivers/media/dvb/dvb-core/dvb_frontend.h13
-rw-r--r--drivers/media/dvb/dvb-core/dvb_net.c22
-rw-r--r--drivers/media/dvb/dvb-core/dvbdev.c41
-rw-r--r--drivers/media/dvb/dvb-usb/Kconfig2
-rw-r--r--drivers/media/dvb/dvb-usb/dib0700.h5
-rw-r--r--drivers/media/dvb/dvb-usb/dib0700_core.c23
-rw-r--r--drivers/media/dvb/dvb-usb/dib0700_devices.c676
-rw-r--r--drivers/media/dvb/dvb-usb/dtt200u.c28
-rw-r--r--drivers/media/dvb/dvb-usb/dvb-usb-ids.h26
-rw-r--r--drivers/media/dvb/dvb-usb/dvb-usb-init.c2
-rw-r--r--drivers/media/dvb/dvb-usb/gp8psk-fe.c84
-rw-r--r--drivers/media/dvb/dvb-usb/gp8psk.c93
-rw-r--r--drivers/media/dvb/dvb-usb/gp8psk.h32
-rw-r--r--drivers/media/dvb/dvb-usb/vp7045.c2
-rw-r--r--drivers/media/dvb/frontends/Kconfig33
-rw-r--r--drivers/media/dvb/frontends/Makefile4
-rw-r--r--drivers/media/dvb/frontends/bcm3510.c1
-rw-r--r--drivers/media/dvb/frontends/cx22700.c1
-rw-r--r--drivers/media/dvb/frontends/cx24110.c1
-rw-r--r--drivers/media/dvb/frontends/cx24123.c1
-rw-r--r--drivers/media/dvb/frontends/dib0070.c580
-rw-r--r--drivers/media/dvb/frontends/dib0070.h44
-rw-r--r--drivers/media/dvb/frontends/dib3000mb.c1
-rw-r--r--drivers/media/dvb/frontends/dib3000mc.c192
-rw-r--r--drivers/media/dvb/frontends/dib7000m.c727
-rw-r--r--drivers/media/dvb/frontends/dib7000p.c908
-rw-r--r--drivers/media/dvb/frontends/dib7000p.h14
-rw-r--r--drivers/media/dvb/frontends/dibx000_common.h57
-rw-r--r--drivers/media/dvb/frontends/dvb-pll.c147
-rw-r--r--drivers/media/dvb/frontends/dvb_dummy_fe.c1
-rw-r--r--drivers/media/dvb/frontends/isl6421.c1
-rw-r--r--drivers/media/dvb/frontends/l64781.c1
-rw-r--r--drivers/media/dvb/frontends/lgdt330x.c1
-rw-r--r--drivers/media/dvb/frontends/lnbp21.c1
-rw-r--r--drivers/media/dvb/frontends/mt2060.c1
-rw-r--r--drivers/media/dvb/frontends/mt2131.c314
-rw-r--r--drivers/media/dvb/frontends/mt2131.h54
-rw-r--r--drivers/media/dvb/frontends/mt2131_priv.h49
-rw-r--r--drivers/media/dvb/frontends/mt2266.c287
-rw-r--r--drivers/media/dvb/frontends/mt2266.h37
-rw-r--r--drivers/media/dvb/frontends/mt312.c1
-rw-r--r--drivers/media/dvb/frontends/mt352.c1
-rw-r--r--drivers/media/dvb/frontends/nxt200x.c1
-rw-r--r--drivers/media/dvb/frontends/or51132.c1
-rw-r--r--drivers/media/dvb/frontends/or51211.c1
-rw-r--r--drivers/media/dvb/frontends/s5h1409.c729
-rw-r--r--drivers/media/dvb/frontends/s5h1409.h73
-rw-r--r--drivers/media/dvb/frontends/sp8870.c1
-rw-r--r--drivers/media/dvb/frontends/sp887x.c1
-rw-r--r--drivers/media/dvb/frontends/stv0297.c4
-rw-r--r--drivers/media/dvb/frontends/stv0299.c1
-rw-r--r--drivers/media/dvb/frontends/tda10021.c4
-rw-r--r--drivers/media/dvb/frontends/tda10023.c10
-rw-r--r--drivers/media/dvb/frontends/tda1004x.c1
-rw-r--r--drivers/media/dvb/frontends/tda10086.c1
-rw-r--r--drivers/media/dvb/frontends/tda8083.c9
-rw-r--r--drivers/media/dvb/frontends/ves1820.c4
-rw-r--r--drivers/media/dvb/frontends/zl10353.c1
-rw-r--r--drivers/media/dvb/ttpci/av7110.c3
-rw-r--r--drivers/media/dvb/ttpci/av7110_hw.c28
-rw-r--r--drivers/media/dvb/ttpci/av7110_ir.c3
-rw-r--r--drivers/media/dvb/ttpci/av7110_v4l.c6
-rw-r--r--drivers/media/dvb/ttpci/budget-av.c2
-rw-r--r--drivers/media/dvb/ttpci/budget-ci.c2
-rw-r--r--drivers/media/dvb/ttpci/budget-core.c1
-rw-r--r--drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c1
-rw-r--r--drivers/media/dvb/ttusb-dec/ttusb_dec.c1
-rw-r--r--drivers/media/radio/Kconfig24
-rw-r--r--drivers/media/radio/radio-gemtek.c618
-rw-r--r--drivers/media/radio/radio-terratec.c2
-rw-r--r--drivers/media/video/Kconfig29
-rw-r--r--drivers/media/video/Makefile28
-rw-r--r--drivers/media/video/arv.c3
-rw-r--r--drivers/media/video/bt8xx/Kconfig2
-rw-r--r--drivers/media/video/bt8xx/bttv-cards.c38
-rw-r--r--drivers/media/video/bt8xx/bttv-driver.c31
-rw-r--r--drivers/media/video/bt8xx/bttv-gpio.c6
-rw-r--r--drivers/media/video/bt8xx/bttv-i2c.c1
-rw-r--r--drivers/media/video/bt8xx/bttv-input.c1
-rw-r--r--drivers/media/video/bt8xx/bttv-risc.c35
-rw-r--r--drivers/media/video/bt8xx/bttv-vbi.c6
-rw-r--r--drivers/media/video/bt8xx/bttv.h2
-rw-r--r--drivers/media/video/bt8xx/bttvp.h2
-rw-r--r--drivers/media/video/btcx-risc.c1
-rw-r--r--drivers/media/video/bw-qcam.c18
-rw-r--r--drivers/media/video/cafe_ccic.c21
-rw-r--r--drivers/media/video/compat_ioctl32.c5
-rw-r--r--drivers/media/video/cpia.c1
-rw-r--r--drivers/media/video/cpia2/cpia2_v4l.c1
-rw-r--r--drivers/media/video/cx2341x.c19
-rw-r--r--drivers/media/video/cx23885/Kconfig20
-rw-r--r--drivers/media/video/cx23885/Makefile9
-rw-r--r--drivers/media/video/cx23885/cx23885-cards.c280
-rw-r--r--drivers/media/video/cx23885/cx23885-core.c1530
-rw-r--r--drivers/media/video/cx23885/cx23885-dvb.c213
-rw-r--r--drivers/media/video/cx23885/cx23885-i2c.c382
-rw-r--r--drivers/media/video/cx23885/cx23885-reg.h431
-rw-r--r--drivers/media/video/cx23885/cx23885.h301
-rw-r--r--drivers/media/video/cx25840/cx25840-audio.c75
-rw-r--r--drivers/media/video/cx25840/cx25840-core.c98
-rw-r--r--drivers/media/video/cx25840/cx25840-core.h6
-rw-r--r--drivers/media/video/cx88/Kconfig4
-rw-r--r--drivers/media/video/cx88/cx88-alsa.c315
-rw-r--r--drivers/media/video/cx88/cx88-blackbird.c31
-rw-r--r--drivers/media/video/cx88/cx88-cards.c219
-rw-r--r--drivers/media/video/cx88/cx88-core.c222
-rw-r--r--drivers/media/video/cx88/cx88-dvb.c25
-rw-r--r--drivers/media/video/cx88/cx88-i2c.c27
-rw-r--r--drivers/media/video/cx88/cx88-input.c20
-rw-r--r--drivers/media/video/cx88/cx88-mpeg.c142
-rw-r--r--drivers/media/video/cx88/cx88-reg.h35
-rw-r--r--drivers/media/video/cx88/cx88-tvaudio.c22
-rw-r--r--drivers/media/video/cx88/cx88-vbi.c13
-rw-r--r--drivers/media/video/cx88/cx88-video.c169
-rw-r--r--drivers/media/video/cx88/cx88-vp3054-i2c.c5
-rw-r--r--drivers/media/video/cx88/cx88.h39
-rw-r--r--drivers/media/video/dpc7146.c5
-rw-r--r--drivers/media/video/em28xx/em28xx-core.c1
-rw-r--r--drivers/media/video/em28xx/em28xx-input.c1
-rw-r--r--drivers/media/video/em28xx/em28xx-video.c6
-rw-r--r--drivers/media/video/et61x251/et61x251_core.c59
-rw-r--r--drivers/media/video/ir-kbd-i2c.c38
-rw-r--r--drivers/media/video/ivtv/Kconfig17
-rw-r--r--drivers/media/video/ivtv/Makefile5
-rw-r--r--drivers/media/video/ivtv/ivtv-audio.c74
-rw-r--r--drivers/media/video/ivtv/ivtv-audio.h23
-rw-r--r--drivers/media/video/ivtv/ivtv-cards.c84
-rw-r--r--drivers/media/video/ivtv/ivtv-cards.h67
-rw-r--r--drivers/media/video/ivtv/ivtv-controls.c16
-rw-r--r--drivers/media/video/ivtv/ivtv-controls.h5
-rw-r--r--drivers/media/video/ivtv/ivtv-driver.c332
-rw-r--r--drivers/media/video/ivtv/ivtv-driver.h691
-rw-r--r--drivers/media/video/ivtv/ivtv-fileops.c199
-rw-r--r--drivers/media/video/ivtv/ivtv-fileops.h5
-rw-r--r--drivers/media/video/ivtv/ivtv-firmware.h5
-rw-r--r--drivers/media/video/ivtv/ivtv-gpio.c24
-rw-r--r--drivers/media/video/ivtv/ivtv-gpio.h7
-rw-r--r--drivers/media/video/ivtv/ivtv-i2c.c17
-rw-r--r--drivers/media/video/ivtv/ivtv-i2c.h5
-rw-r--r--drivers/media/video/ivtv/ivtv-ioctl.c191
-rw-r--r--drivers/media/video/ivtv/ivtv-ioctl.h5
-rw-r--r--drivers/media/video/ivtv/ivtv-irq.c321
-rw-r--r--drivers/media/video/ivtv/ivtv-irq.h27
-rw-r--r--drivers/media/video/ivtv/ivtv-mailbox.c6
-rw-r--r--drivers/media/video/ivtv/ivtv-mailbox.h8
-rw-r--r--drivers/media/video/ivtv/ivtv-queue.c119
-rw-r--r--drivers/media/video/ivtv/ivtv-queue.h13
-rw-r--r--drivers/media/video/ivtv/ivtv-routing.c116
-rw-r--r--drivers/media/video/ivtv/ivtv-routing.h27
-rw-r--r--drivers/media/video/ivtv/ivtv-streams.c131
-rw-r--r--drivers/media/video/ivtv/ivtv-streams.h5
-rw-r--r--drivers/media/video/ivtv/ivtv-udma.c46
-rw-r--r--drivers/media/video/ivtv/ivtv-udma.h5
-rw-r--r--drivers/media/video/ivtv/ivtv-vbi.c283
-rw-r--r--drivers/media/video/ivtv/ivtv-vbi.h9
-rw-r--r--drivers/media/video/ivtv/ivtv-version.h7
-rw-r--r--drivers/media/video/ivtv/ivtv-video.c142
-rw-r--r--drivers/media/video/ivtv/ivtv-video.h24
-rw-r--r--drivers/media/video/ivtv/ivtv-yuv.c55
-rw-r--r--drivers/media/video/ivtv/ivtv-yuv.h21
-rw-r--r--drivers/media/video/ivtv/ivtvfb.c1190
-rw-r--r--drivers/media/video/msp3400-driver.c19
-rw-r--r--drivers/media/video/mt20xx.c311
-rw-r--r--drivers/media/video/mt20xx.h37
-rw-r--r--drivers/media/video/mxb.c4
-rw-r--r--drivers/media/video/ov511.c81
-rw-r--r--drivers/media/video/ov7670.c1
-rw-r--r--drivers/media/video/ovcamchip/ovcamchip_core.c1
-rw-r--r--drivers/media/video/planb.c30
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-context.c6
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-debug.h53
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-debugifc.c16
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h1
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-hdw.c310
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-hdw.h12
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-i2c-core.c63
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-main.c2
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-std.c8
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-sysfs.c216
-rw-r--r--drivers/media/video/pwc/pwc-ctrl.c2
-rw-r--r--drivers/media/video/pwc/pwc-if.c132
-rw-r--r--drivers/media/video/saa6588.c1
-rw-r--r--drivers/media/video/saa7127.c10
-rw-r--r--drivers/media/video/saa7134/Kconfig4
-rw-r--r--drivers/media/video/saa7134/saa7134-alsa.c3
-rw-r--r--drivers/media/video/saa7134/saa7134-cards.c57
-rw-r--r--drivers/media/video/saa7134/saa7134-core.c214
-rw-r--r--drivers/media/video/saa7134/saa7134-dvb.c23
-rw-r--r--drivers/media/video/saa7134/saa7134-empress.c18
-rw-r--r--drivers/media/video/saa7134/saa7134-i2c.c1
-rw-r--r--drivers/media/video/saa7134/saa7134-input.c1
-rw-r--r--drivers/media/video/saa7134/saa7134-oss.c43
-rw-r--r--drivers/media/video/saa7134/saa7134-ts.c30
-rw-r--r--drivers/media/video/saa7134/saa7134-tvaudio.c5
-rw-r--r--drivers/media/video/saa7134/saa7134-vbi.c7
-rw-r--r--drivers/media/video/saa7134/saa7134-video.c210
-rw-r--r--drivers/media/video/saa7134/saa7134.h23
-rw-r--r--drivers/media/video/sn9c102/sn9c102_core.c113
-rw-r--r--drivers/media/video/stv680.c51
-rw-r--r--drivers/media/video/tcm825x.c928
-rw-r--r--drivers/media/video/tcm825x.h199
-rw-r--r--drivers/media/video/tda8290.c517
-rw-r--r--drivers/media/video/tda8290.h54
-rw-r--r--drivers/media/video/tda9887.c62
-rw-r--r--drivers/media/video/tea5761.c187
-rw-r--r--drivers/media/video/tea5761.h47
-rw-r--r--drivers/media/video/tea5767.c203
-rw-r--r--drivers/media/video/tea5767.h47
-rw-r--r--drivers/media/video/tuner-core.c256
-rw-r--r--drivers/media/video/tuner-driver.h44
-rw-r--r--drivers/media/video/tuner-i2c.h70
-rw-r--r--drivers/media/video/tuner-simple.c397
-rw-r--r--drivers/media/video/tuner-simple.h46
-rw-r--r--drivers/media/video/tuner-types.c8
-rw-r--r--drivers/media/video/tvaudio.c1
-rw-r--r--drivers/media/video/tveeprom.c1
-rw-r--r--drivers/media/video/tvmixer.c6
-rw-r--r--drivers/media/video/usbvision/usbvision-core.c1
-rw-r--r--drivers/media/video/usbvision/usbvision-i2c.c4
-rw-r--r--drivers/media/video/usbvision/usbvision-video.c120
-rw-r--r--drivers/media/video/v4l1-compat.c1
-rw-r--r--drivers/media/video/v4l2-common.c6
-rw-r--r--drivers/media/video/v4l2-int-device.c158
-rw-r--r--drivers/media/video/video-buf-dvb.c255
-rw-r--r--drivers/media/video/video-buf.c1425
-rw-r--r--drivers/media/video/videobuf-core.c1006
-rw-r--r--drivers/media/video/videobuf-dma-sg.c726
-rw-r--r--drivers/media/video/videobuf-dvb.c256
-rw-r--r--drivers/media/video/videobuf-vmalloc.c370
-rw-r--r--drivers/media/video/videodev.c39
-rw-r--r--drivers/media/video/vino.c1
-rw-r--r--drivers/media/video/vivi.c185
-rw-r--r--drivers/media/video/vp27smpx.c212
-rw-r--r--drivers/media/video/w9968cf.c3
-rw-r--r--drivers/media/video/zc0301/zc0301_core.c3
-rw-r--r--drivers/media/video/zoran_card.c64
-rw-r--r--drivers/media/video/zoran_card.h8
-rw-r--r--drivers/media/video/zoran_device.c19
-rw-r--r--drivers/media/video/zoran_driver.c31
-rw-r--r--drivers/media/video/zoran_procfs.c9
-rw-r--r--drivers/media/video/zr36016.c4
-rw-r--r--drivers/media/video/zr36050.c6
-rw-r--r--drivers/media/video/zr36060.c6
-rw-r--r--drivers/mmc/card/Kconfig7
-rw-r--r--drivers/mmc/card/Makefile2
-rw-r--r--drivers/mmc/card/block.c30
-rw-r--r--drivers/mmc/card/sdio_uart.c1158
-rw-r--r--drivers/mmc/core/Makefile4
-rw-r--r--drivers/mmc/core/bus.c67
-rw-r--r--drivers/mmc/core/core.c167
-rw-r--r--drivers/mmc/core/core.h2
-rw-r--r--drivers/mmc/core/host.c8
-rw-r--r--drivers/mmc/core/mmc.c134
-rw-r--r--drivers/mmc/core/mmc_ops.c200
-rw-r--r--drivers/mmc/core/mmc_ops.h3
-rw-r--r--drivers/mmc/core/sd.c126
-rw-r--r--drivers/mmc/core/sd_ops.c107
-rw-r--r--drivers/mmc/core/sdio.c395
-rw-r--r--drivers/mmc/core/sdio_bus.c270
-rw-r--r--drivers/mmc/core/sdio_bus.h22
-rw-r--r--drivers/mmc/core/sdio_cis.c346
-rw-r--r--drivers/mmc/core/sdio_cis.h23
-rw-r--r--drivers/mmc/core/sdio_io.c548
-rw-r--r--drivers/mmc/core/sdio_irq.c267
-rw-r--r--drivers/mmc/core/sdio_ops.c176
-rw-r--r--drivers/mmc/core/sdio_ops.h22
-rw-r--r--drivers/mmc/host/Kconfig30
-rw-r--r--drivers/mmc/host/Makefile2
-rw-r--r--drivers/mmc/host/at91_mci.c25
-rw-r--r--drivers/mmc/host/au1xmmc.c58
-rw-r--r--drivers/mmc/host/imxmmc.c32
-rw-r--r--drivers/mmc/host/mmc_spi.c1408
-rw-r--r--drivers/mmc/host/mmci.c21
-rw-r--r--drivers/mmc/host/omap.c12
-rw-r--r--drivers/mmc/host/pxamci.c71
-rw-r--r--drivers/mmc/host/pxamci.h2
-rw-r--r--drivers/mmc/host/ricoh_mmc.c151
-rw-r--r--drivers/mmc/host/sdhci.c127
-rw-r--r--drivers/mmc/host/sdhci.h2
-rw-r--r--drivers/mmc/host/tifm_sd.c32
-rw-r--r--drivers/mmc/host/wbsd.c43
-rw-r--r--drivers/pci/hotplug/cpqphp_core.c2
-rw-r--r--drivers/pci/hotplug/cpqphp_pci.c2
-rw-r--r--drivers/pci/hotplug/ibmphp_core.c2
-rw-r--r--drivers/serial/bfin_5xx.c222
-rw-r--r--include/asm-arm/arch-imx/mmc.h5
-rw-r--r--include/asm-avr32/arch-at32ap/board.h8
-rw-r--r--include/asm-avr32/arch-at32ap/portmux.h1
-rw-r--r--include/asm-avr32/arch-at32ap/smc.h51
-rw-r--r--include/asm-avr32/dma-mapping.h17
-rw-r--r--include/asm-avr32/system.h13
-rw-r--r--include/asm-avr32/unistd.h13
-rw-r--r--include/asm-blackfin/bfin5xx_spi.h2
-rw-r--r--include/asm-blackfin/blackfin.h112
-rw-r--r--include/asm-blackfin/cacheflush.h14
-rw-r--r--include/asm-blackfin/cplb.h99
-rw-r--r--include/asm-blackfin/dma.h2
-rw-r--r--include/asm-blackfin/early_printk.h28
-rw-r--r--include/asm-blackfin/gpio.h31
-rw-r--r--include/asm-blackfin/io.h24
-rw-r--r--include/asm-blackfin/ioctls.h9
-rw-r--r--include/asm-blackfin/irq_handler.h15
-rw-r--r--include/asm-blackfin/kgdb.h1
-rw-r--r--include/asm-blackfin/mach-bf527/anomaly.h41
-rw-r--r--include/asm-blackfin/mach-bf527/defBF52x_base.h2
-rw-r--r--include/asm-blackfin/mach-bf533/anomaly.h468
-rw-r--r--include/asm-blackfin/mach-bf533/bf533.h157
-rw-r--r--include/asm-blackfin/mach-bf533/blackfin.h2
-rw-r--r--include/asm-blackfin/mach-bf533/cdefBF532.h62
-rw-r--r--include/asm-blackfin/mach-bf533/defBF532.h3
-rw-r--r--include/asm-blackfin/mach-bf533/irq.h2
-rw-r--r--include/asm-blackfin/mach-bf533/mem_map.h56
-rw-r--r--include/asm-blackfin/mach-bf537/anomaly.h249
-rw-r--r--include/asm-blackfin/mach-bf537/bf537.h158
-rw-r--r--include/asm-blackfin/mach-bf537/blackfin.h280
-rw-r--r--include/asm-blackfin/mach-bf537/cdefBF534.h4
-rw-r--r--include/asm-blackfin/mach-bf537/defBF534.h4
-rw-r--r--include/asm-blackfin/mach-bf537/irq.h2
-rw-r--r--include/asm-blackfin/mach-bf537/mem_map.h60
-rw-r--r--include/asm-blackfin/mach-bf537/portmux.h2
-rw-r--r--include/asm-blackfin/mach-bf548/anomaly.h145
-rw-r--r--include/asm-blackfin/mach-bf548/bf548.h154
-rw-r--r--include/asm-blackfin/mach-bf548/bfin_serial_5xx.h39
-rw-r--r--include/asm-blackfin/mach-bf548/blackfin.h2
-rw-r--r--include/asm-blackfin/mach-bf548/cdefBF54x_base.h4
-rw-r--r--include/asm-blackfin/mach-bf548/defBF544.h1
-rw-r--r--include/asm-blackfin/mach-bf548/defBF548.h2
-rw-r--r--include/asm-blackfin/mach-bf548/defBF549.h2
-rw-r--r--include/asm-blackfin/mach-bf548/defBF54x_base.h3
-rw-r--r--include/asm-blackfin/mach-bf548/gpio.h5
-rw-r--r--include/asm-blackfin/mach-bf548/irq.h591
-rw-r--r--include/asm-blackfin/mach-bf548/mem_map.h24
-rw-r--r--include/asm-blackfin/mach-bf561/anomaly.h410
-rw-r--r--include/asm-blackfin/mach-bf561/bf561.h178
-rw-r--r--include/asm-blackfin/mach-bf561/blackfin.h2
-rw-r--r--include/asm-blackfin/mach-bf561/cdefBF561.h9
-rw-r--r--include/asm-blackfin/mach-bf561/defBF561.h1
-rw-r--r--include/asm-blackfin/mach-bf561/irq.h2
-rw-r--r--include/asm-blackfin/mach-bf561/mem_map.h24
-rw-r--r--include/asm-blackfin/mach-bf561/portmux.h2
-rw-r--r--include/asm-blackfin/mach-common/cdef_LPBlackfin.h4
-rw-r--r--include/asm-blackfin/mach-common/clocks.h70
-rw-r--r--include/asm-blackfin/mach-common/def_LPBlackfin.h135
-rw-r--r--include/asm-blackfin/pgtable.h2
-rw-r--r--include/asm-blackfin/reboot.h20
-rw-r--r--include/asm-blackfin/system.h93
-rw-r--r--include/asm-blackfin/termbits.h5
-rw-r--r--include/asm-blackfin/termios.h10
-rw-r--r--include/asm-blackfin/trace.h55
-rw-r--r--include/asm-i386/Kbuild12
-rw-r--r--include/asm-i386/k8.h1
-rw-r--r--include/asm-i386/pci-direct.h1
-rw-r--r--include/asm-i386/stacktrace.h1
-rw-r--r--include/asm-i386/termios.h91
-rw-r--r--include/asm-sh/mpc1211/mc146818rtc.h2
-rw-r--r--include/asm-x86/8253pit.h5
-rw-r--r--include/asm-x86/8253pit_32.h (renamed from include/asm-i386/8253pit.h)0
-rw-r--r--include/asm-x86/8253pit_64.h (renamed from include/asm-x86_64/8253pit.h)0
-rw-r--r--include/asm-x86/Kbuild88
-rw-r--r--include/asm-x86/a.out.h13
-rw-r--r--include/asm-x86/a.out_32.h (renamed from include/asm-i386/a.out.h)0
-rw-r--r--include/asm-x86/a.out_64.h (renamed from include/asm-x86_64/a.out.h)0
-rw-r--r--include/asm-x86/acpi.h5
-rw-r--r--include/asm-x86/acpi_32.h (renamed from include/asm-i386/acpi.h)0
-rw-r--r--include/asm-x86/acpi_64.h (renamed from include/asm-x86_64/acpi.h)0
-rw-r--r--include/asm-x86/agp.h5
-rw-r--r--include/asm-x86/agp_32.h (renamed from include/asm-i386/agp.h)0
-rw-r--r--include/asm-x86/agp_64.h (renamed from include/asm-x86_64/agp.h)0
-rw-r--r--include/asm-x86/alternative-asm.i5
-rw-r--r--include/asm-x86/alternative-asm_32.i (renamed from include/asm-i386/alternative-asm.i)0
-rw-r--r--include/asm-x86/alternative-asm_64.i (renamed from include/asm-x86_64/alternative-asm.i)0
-rw-r--r--include/asm-x86/alternative.h5
-rw-r--r--include/asm-x86/alternative_32.h (renamed from include/asm-i386/alternative.h)0
-rw-r--r--include/asm-x86/alternative_64.h (renamed from include/asm-x86_64/alternative.h)0
-rw-r--r--include/asm-x86/apic.h5
-rw-r--r--include/asm-x86/apic_32.h (renamed from include/asm-i386/apic.h)0
-rw-r--r--include/asm-x86/apic_64.h (renamed from include/asm-x86_64/apic.h)0
-rw-r--r--include/asm-x86/apicdef.h5
-rw-r--r--include/asm-x86/apicdef_32.h (renamed from include/asm-i386/apicdef.h)0
-rw-r--r--include/asm-x86/apicdef_64.h (renamed from include/asm-x86_64/apicdef.h)0
-rw-r--r--include/asm-x86/arch_hooks.h (renamed from include/asm-i386/arch_hooks.h)0
-rw-r--r--include/asm-x86/atomic.h5
-rw-r--r--include/asm-x86/atomic_32.h (renamed from include/asm-i386/atomic.h)0
-rw-r--r--include/asm-x86/atomic_64.h (renamed from include/asm-x86_64/atomic.h)0
-rw-r--r--include/asm-x86/auxvec.h13
-rw-r--r--include/asm-x86/auxvec_32.h (renamed from include/asm-i386/auxvec.h)0
-rw-r--r--include/asm-x86/auxvec_64.h (renamed from include/asm-x86_64/auxvec.h)0
-rw-r--r--include/asm-x86/bitops.h5
-rw-r--r--include/asm-x86/bitops_32.h (renamed from include/asm-i386/bitops.h)0
-rw-r--r--include/asm-x86/bitops_64.h (renamed from include/asm-x86_64/bitops.h)0
-rw-r--r--include/asm-x86/boot.h (renamed from include/asm-i386/boot.h)0
-rw-r--r--include/asm-x86/bootparam.h (renamed from include/asm-i386/bootparam.h)0
-rw-r--r--include/asm-x86/bootsetup.h (renamed from include/asm-x86_64/bootsetup.h)0
-rw-r--r--include/asm-x86/bug.h5
-rw-r--r--include/asm-x86/bug_32.h (renamed from include/asm-i386/bug.h)0
-rw-r--r--include/asm-x86/bug_64.h (renamed from include/asm-x86_64/bug.h)0
-rw-r--r--include/asm-x86/bugs.h5
-rw-r--r--include/asm-x86/bugs_32.h (renamed from include/asm-i386/bugs.h)0
-rw-r--r--include/asm-x86/bugs_64.h (renamed from include/asm-x86_64/bugs.h)0
-rw-r--r--include/asm-x86/byteorder.h13
-rw-r--r--include/asm-x86/byteorder_32.h (renamed from include/asm-i386/byteorder.h)0
-rw-r--r--include/asm-x86/byteorder_64.h (renamed from include/asm-x86_64/byteorder.h)0
-rw-r--r--include/asm-x86/cache.h5
-rw-r--r--include/asm-x86/cache_32.h (renamed from include/asm-i386/cache.h)0
-rw-r--r--include/asm-x86/cache_64.h (renamed from include/asm-x86_64/cache.h)0
-rw-r--r--include/asm-x86/cacheflush.h5
-rw-r--r--include/asm-x86/cacheflush_32.h (renamed from include/asm-i386/cacheflush.h)0
-rw-r--r--include/asm-x86/cacheflush_64.h (renamed from include/asm-x86_64/cacheflush.h)0
-rw-r--r--include/asm-x86/calgary.h (renamed from include/asm-x86_64/calgary.h)0
-rw-r--r--include/asm-x86/calling.h (renamed from include/asm-x86_64/calling.h)0
-rw-r--r--include/asm-x86/checksum.h5
-rw-r--r--include/asm-x86/checksum_32.h (renamed from include/asm-i386/checksum.h)0
-rw-r--r--include/asm-x86/checksum_64.h (renamed from include/asm-x86_64/checksum.h)0
-rw-r--r--include/asm-x86/cmpxchg.h5
-rw-r--r--include/asm-x86/cmpxchg_32.h (renamed from include/asm-i386/cmpxchg.h)0
-rw-r--r--include/asm-x86/cmpxchg_64.h (renamed from include/asm-x86_64/cmpxchg.h)0
-rw-r--r--include/asm-x86/compat.h (renamed from include/asm-x86_64/compat.h)0
-rw-r--r--include/asm-x86/cpu.h (renamed from include/asm-i386/cpu.h)0
-rw-r--r--include/asm-x86/cpufeature.h5
-rw-r--r--include/asm-x86/cpufeature_32.h (renamed from include/asm-i386/cpufeature.h)0
-rw-r--r--include/asm-x86/cpufeature_64.h30
-rw-r--r--include/asm-x86/cputime.h5
-rw-r--r--include/asm-x86/cputime_32.h (renamed from include/asm-i386/cputime.h)0
-rw-r--r--include/asm-x86/cputime_64.h (renamed from include/asm-x86_64/cputime.h)0
-rw-r--r--include/asm-x86/current.h5
-rw-r--r--include/asm-x86/current_32.h (renamed from include/asm-i386/current.h)0
-rw-r--r--include/asm-x86/current_64.h (renamed from include/asm-x86_64/current.h)0
-rw-r--r--include/asm-x86/debugreg.h13
-rw-r--r--include/asm-x86/debugreg_32.h (renamed from include/asm-i386/debugreg.h)0
-rw-r--r--include/asm-x86/debugreg_64.h (renamed from include/asm-x86_64/debugreg.h)0
-rw-r--r--include/asm-x86/delay.h5
-rw-r--r--include/asm-x86/delay_32.h (renamed from include/asm-i386/delay.h)0
-rw-r--r--include/asm-x86/delay_64.h (renamed from include/asm-x86_64/delay.h)0
-rw-r--r--include/asm-x86/desc.h5
-rw-r--r--include/asm-x86/desc_32.h (renamed from include/asm-i386/desc.h)0
-rw-r--r--include/asm-x86/desc_64.h (renamed from include/asm-x86_64/desc.h)0
-rw-r--r--include/asm-x86/desc_defs.h (renamed from include/asm-x86_64/desc_defs.h)0
-rw-r--r--include/asm-x86/device.h5
-rw-r--r--include/asm-x86/device_32.h (renamed from include/asm-i386/device.h)0
-rw-r--r--include/asm-x86/device_64.h (renamed from include/asm-x86_64/device.h)0
-rw-r--r--include/asm-x86/div64.h5
-rw-r--r--include/asm-x86/div64_32.h (renamed from include/asm-i386/div64.h)0
-rw-r--r--include/asm-x86/div64_64.h (renamed from include/asm-x86_64/div64.h)0
-rw-r--r--include/asm-x86/dma-mapping.h5
-rw-r--r--include/asm-x86/dma-mapping_32.h (renamed from include/asm-i386/dma-mapping.h)0
-rw-r--r--include/asm-x86/dma-mapping_64.h (renamed from include/asm-x86_64/dma-mapping.h)0
-rw-r--r--include/asm-x86/dma.h5
-rw-r--r--include/asm-x86/dma_32.h (renamed from include/asm-i386/dma.h)0
-rw-r--r--include/asm-x86/dma_64.h (renamed from include/asm-x86_64/dma.h)0
-rw-r--r--include/asm-x86/dmi.h5
-rw-r--r--include/asm-x86/dmi_32.h (renamed from include/asm-i386/dmi.h)0
-rw-r--r--include/asm-x86/dmi_64.h (renamed from include/asm-x86_64/dmi.h)0
-rw-r--r--include/asm-x86/dwarf2.h5
-rw-r--r--include/asm-x86/dwarf2_32.h (renamed from include/asm-i386/dwarf2.h)0
-rw-r--r--include/asm-x86/dwarf2_64.h (renamed from include/asm-x86_64/dwarf2.h)0
-rw-r--r--include/asm-x86/e820.h5
-rw-r--r--include/asm-x86/e820_32.h (renamed from include/asm-i386/e820.h)0
-rw-r--r--include/asm-x86/e820_64.h (renamed from include/asm-x86_64/e820.h)0
-rw-r--r--include/asm-x86/edac.h5
-rw-r--r--include/asm-x86/edac_32.h (renamed from include/asm-i386/edac.h)0
-rw-r--r--include/asm-x86/edac_64.h (renamed from include/asm-x86_64/edac.h)0
-rw-r--r--include/asm-x86/elf.h13
-rw-r--r--include/asm-x86/elf_32.h (renamed from include/asm-i386/elf.h)0
-rw-r--r--include/asm-x86/elf_64.h (renamed from include/asm-x86_64/elf.h)0
-rw-r--r--include/asm-x86/emergency-restart.h (renamed from include/asm-i386/emergency-restart.h)0
-rw-r--r--include/asm-x86/errno.h13
-rw-r--r--include/asm-x86/errno_32.h (renamed from include/asm-i386/errno.h)0
-rw-r--r--include/asm-x86/errno_64.h (renamed from include/asm-x86_64/errno.h)0
-rw-r--r--include/asm-x86/fb.h5
-rw-r--r--include/asm-x86/fb_32.h (renamed from include/asm-i386/fb.h)0
-rw-r--r--include/asm-x86/fb_64.h (renamed from include/asm-x86_64/fb.h)0
-rw-r--r--include/asm-x86/fcntl.h (renamed from include/asm-i386/fcntl.h)0
-rw-r--r--include/asm-x86/fixmap.h5
-rw-r--r--include/asm-x86/fixmap_32.h (renamed from include/asm-i386/fixmap.h)0
-rw-r--r--include/asm-x86/fixmap_64.h (renamed from include/asm-x86_64/fixmap.h)0
-rw-r--r--include/asm-x86/floppy.h5
-rw-r--r--include/asm-x86/floppy_32.h (renamed from include/asm-i386/floppy.h)0
-rw-r--r--include/asm-x86/floppy_64.h (renamed from include/asm-x86_64/floppy.h)0
-rw-r--r--include/asm-x86/fpu32.h (renamed from include/asm-x86_64/fpu32.h)0
-rw-r--r--include/asm-x86/frame.i (renamed from include/asm-i386/frame.i)0
-rw-r--r--include/asm-x86/futex.h5
-rw-r--r--include/asm-x86/futex_32.h (renamed from include/asm-i386/futex.h)0
-rw-r--r--include/asm-x86/futex_64.h (renamed from include/asm-x86_64/futex.h)0
-rw-r--r--include/asm-x86/genapic.h5
-rw-r--r--include/asm-x86/genapic_32.h (renamed from include/asm-i386/genapic.h)0
-rw-r--r--include/asm-x86/genapic_64.h (renamed from include/asm-x86_64/genapic.h)0
-rw-r--r--include/asm-x86/geode.h (renamed from include/asm-i386/geode.h)0
-rw-r--r--include/asm-x86/hardirq.h5
-rw-r--r--include/asm-x86/hardirq_32.h (renamed from include/asm-i386/hardirq.h)0
-rw-r--r--include/asm-x86/hardirq_64.h (renamed from include/asm-x86_64/hardirq.h)0
-rw-r--r--include/asm-x86/highmem.h (renamed from include/asm-i386/highmem.h)0
-rw-r--r--include/asm-x86/hpet.h5
-rw-r--r--include/asm-x86/hpet_32.h (renamed from include/asm-i386/hpet.h)0
-rw-r--r--include/asm-x86/hpet_64.h18
-rw-r--r--include/asm-x86/hw_irq.h5
-rw-r--r--include/asm-x86/hw_irq_32.h (renamed from include/asm-i386/hw_irq.h)0
-rw-r--r--include/asm-x86/hw_irq_64.h (renamed from include/asm-x86_64/hw_irq.h)0
-rw-r--r--include/asm-x86/hypertransport.h (renamed from include/asm-i386/hypertransport.h)0
-rw-r--r--include/asm-x86/i387.h5
-rw-r--r--include/asm-x86/i387_32.h (renamed from include/asm-i386/i387.h)0
-rw-r--r--include/asm-x86/i387_64.h (renamed from include/asm-x86_64/i387.h)0
-rw-r--r--include/asm-x86/i8253.h5
-rw-r--r--include/asm-x86/i8253_32.h (renamed from include/asm-i386/i8253.h)0
-rw-r--r--include/asm-x86/i8253_64.h (renamed from include/asm-x86_64/i8253.h)0
-rw-r--r--include/asm-x86/i8259.h (renamed from include/asm-i386/i8259.h)0
-rw-r--r--include/asm-x86/ia32.h (renamed from include/asm-x86_64/ia32.h)0
-rw-r--r--include/asm-x86/ia32_unistd.h (renamed from include/asm-x86_64/ia32_unistd.h)0
-rw-r--r--include/asm-x86/ide.h (renamed from include/asm-i386/ide.h)0
-rw-r--r--include/asm-x86/idle.h (renamed from include/asm-x86_64/idle.h)0
-rw-r--r--include/asm-x86/intel_arch_perfmon.h5
-rw-r--r--include/asm-x86/intel_arch_perfmon_32.h (renamed from include/asm-i386/intel_arch_perfmon.h)0
-rw-r--r--include/asm-x86/intel_arch_perfmon_64.h (renamed from include/asm-x86_64/intel_arch_perfmon.h)0
-rw-r--r--include/asm-x86/io.h5
-rw-r--r--include/asm-x86/io_32.h (renamed from include/asm-i386/io.h)0
-rw-r--r--include/asm-x86/io_64.h (renamed from include/asm-x86_64/io.h)0
-rw-r--r--include/asm-x86/io_apic.h5
-rw-r--r--include/asm-x86/io_apic_32.h (renamed from include/asm-i386/io_apic.h)0
-rw-r--r--include/asm-x86/io_apic_64.h (renamed from include/asm-x86_64/io_apic.h)0
-rw-r--r--include/asm-x86/ioctl.h (renamed from include/asm-i386/ioctl.h)0
-rw-r--r--include/asm-x86/ioctls.h13
-rw-r--r--include/asm-x86/ioctls_32.h (renamed from include/asm-i386/ioctls.h)0
-rw-r--r--include/asm-x86/ioctls_64.h (renamed from include/asm-x86_64/ioctls.h)0
-rw-r--r--include/asm-x86/iommu.h (renamed from include/asm-x86_64/iommu.h)0
-rw-r--r--include/asm-x86/ipc.h (renamed from include/asm-i386/ipc.h)0
-rw-r--r--include/asm-x86/ipcbuf.h13
-rw-r--r--include/asm-x86/ipcbuf_32.h (renamed from include/asm-i386/ipcbuf.h)0
-rw-r--r--include/asm-x86/ipcbuf_64.h (renamed from include/asm-x86_64/ipcbuf.h)0
-rw-r--r--include/asm-x86/ipi.h (renamed from include/asm-x86_64/ipi.h)0
-rw-r--r--include/asm-x86/irq.h5
-rw-r--r--include/asm-x86/irq_32.h (renamed from include/asm-i386/irq.h)0
-rw-r--r--include/asm-x86/irq_64.h (renamed from include/asm-x86_64/irq.h)0
-rw-r--r--include/asm-x86/irq_regs.h5
-rw-r--r--include/asm-x86/irq_regs_32.h (renamed from include/asm-i386/irq_regs.h)0
-rw-r--r--include/asm-x86/irq_regs_64.h (renamed from include/asm-x86_64/irq_regs.h)0
-rw-r--r--include/asm-x86/irqflags.h5
-rw-r--r--include/asm-x86/irqflags_32.h (renamed from include/asm-i386/irqflags.h)0
-rw-r--r--include/asm-x86/irqflags_64.h (renamed from include/asm-x86_64/irqflags.h)0
-rw-r--r--include/asm-x86/ist.h (renamed from include/asm-i386/ist.h)0
-rw-r--r--include/asm-x86/k8.h (renamed from include/asm-x86_64/k8.h)0
-rw-r--r--include/asm-x86/kdebug.h5
-rw-r--r--include/asm-x86/kdebug_32.h (renamed from include/asm-i386/kdebug.h)0
-rw-r--r--include/asm-x86/kdebug_64.h (renamed from include/asm-x86_64/kdebug.h)0
-rw-r--r--include/asm-x86/kexec.h5
-rw-r--r--include/asm-x86/kexec_32.h (renamed from include/asm-i386/kexec.h)0
-rw-r--r--include/asm-x86/kexec_64.h (renamed from include/asm-x86_64/kexec.h)0
-rw-r--r--include/asm-x86/kmap_types.h5
-rw-r--r--include/asm-x86/kmap_types_32.h (renamed from include/asm-i386/kmap_types.h)0
-rw-r--r--include/asm-x86/kmap_types_64.h (renamed from include/asm-x86_64/kmap_types.h)0
-rw-r--r--include/asm-x86/kprobes.h5
-rw-r--r--include/asm-x86/kprobes_32.h (renamed from include/asm-i386/kprobes.h)0
-rw-r--r--include/asm-x86/kprobes_64.h (renamed from include/asm-x86_64/kprobes.h)0
-rw-r--r--include/asm-x86/ldt.h13
-rw-r--r--include/asm-x86/ldt_32.h (renamed from include/asm-i386/ldt.h)0
-rw-r--r--include/asm-x86/ldt_64.h (renamed from include/asm-x86_64/ldt.h)0
-rw-r--r--include/asm-x86/linkage.h5
-rw-r--r--include/asm-x86/linkage_32.h (renamed from include/asm-i386/linkage.h)0
-rw-r--r--include/asm-x86/linkage_64.h (renamed from include/asm-x86_64/linkage.h)0
-rw-r--r--include/asm-x86/local.h5
-rw-r--r--include/asm-x86/local_32.h (renamed from include/asm-i386/local.h)0
-rw-r--r--include/asm-x86/local_64.h (renamed from include/asm-x86_64/local.h)0
-rw-r--r--include/asm-x86/mach-bigsmp/mach_apic.h (renamed from include/asm-i386/mach-bigsmp/mach_apic.h)0
-rw-r--r--include/asm-x86/mach-bigsmp/mach_apicdef.h (renamed from include/asm-i386/mach-bigsmp/mach_apicdef.h)0
-rw-r--r--include/asm-x86/mach-bigsmp/mach_ipi.h (renamed from include/asm-i386/mach-bigsmp/mach_ipi.h)0
-rw-r--r--include/asm-x86/mach-bigsmp/mach_mpspec.h (renamed from include/asm-i386/mach-bigsmp/mach_mpspec.h)0
-rw-r--r--include/asm-x86/mach-default/apm.h (renamed from include/asm-i386/mach-default/apm.h)0
-rw-r--r--include/asm-x86/mach-default/bios_ebda.h (renamed from include/asm-i386/mach-default/bios_ebda.h)0
-rw-r--r--include/asm-x86/mach-default/do_timer.h (renamed from include/asm-i386/mach-default/do_timer.h)0
-rw-r--r--include/asm-x86/mach-default/entry_arch.h (renamed from include/asm-i386/mach-default/entry_arch.h)0
-rw-r--r--include/asm-x86/mach-default/io_ports.h (renamed from include/asm-i386/mach-default/io_ports.h)0
-rw-r--r--include/asm-x86/mach-default/irq_vectors.h (renamed from include/asm-i386/mach-default/irq_vectors.h)0
-rw-r--r--include/asm-x86/mach-default/irq_vectors_limits.h (renamed from include/asm-i386/mach-default/irq_vectors_limits.h)0
-rw-r--r--include/asm-x86/mach-default/mach_apic.h (renamed from include/asm-i386/mach-default/mach_apic.h)0
-rw-r--r--include/asm-x86/mach-default/mach_apicdef.h (renamed from include/asm-i386/mach-default/mach_apicdef.h)0
-rw-r--r--include/asm-x86/mach-default/mach_ipi.h (renamed from include/asm-i386/mach-default/mach_ipi.h)0
-rw-r--r--include/asm-x86/mach-default/mach_mpparse.h (renamed from include/asm-i386/mach-default/mach_mpparse.h)0
-rw-r--r--include/asm-x86/mach-default/mach_mpspec.h (renamed from include/asm-i386/mach-default/mach_mpspec.h)0
-rw-r--r--include/asm-x86/mach-default/mach_reboot.h (renamed from include/asm-i386/mach-default/mach_reboot.h)0
-rw-r--r--include/asm-x86/mach-default/mach_time.h (renamed from include/asm-i386/mach-default/mach_time.h)0
-rw-r--r--include/asm-x86/mach-default/mach_timer.h (renamed from include/asm-i386/mach-default/mach_timer.h)0
-rw-r--r--include/asm-x86/mach-default/mach_traps.h (renamed from include/asm-i386/mach-default/mach_traps.h)0
-rw-r--r--include/asm-x86/mach-default/mach_wakecpu.h (renamed from include/asm-i386/mach-default/mach_wakecpu.h)0
-rw-r--r--include/asm-x86/mach-default/pci-functions.h (renamed from include/asm-i386/mach-default/pci-functions.h)0
-rw-r--r--include/asm-x86/mach-default/setup_arch.h (renamed from include/asm-i386/mach-default/setup_arch.h)0
-rw-r--r--include/asm-x86/mach-default/smpboot_hooks.h (renamed from include/asm-i386/mach-default/smpboot_hooks.h)0
-rw-r--r--include/asm-x86/mach-es7000/mach_apic.h (renamed from include/asm-i386/mach-es7000/mach_apic.h)0
-rw-r--r--include/asm-x86/mach-es7000/mach_apicdef.h (renamed from include/asm-i386/mach-es7000/mach_apicdef.h)0
-rw-r--r--include/asm-x86/mach-es7000/mach_ipi.h (renamed from include/asm-i386/mach-es7000/mach_ipi.h)0
-rw-r--r--include/asm-x86/mach-es7000/mach_mpparse.h (renamed from include/asm-i386/mach-es7000/mach_mpparse.h)0
-rw-r--r--include/asm-x86/mach-es7000/mach_mpspec.h (renamed from include/asm-i386/mach-es7000/mach_mpspec.h)0
-rw-r--r--include/asm-x86/mach-es7000/mach_wakecpu.h (renamed from include/asm-i386/mach-es7000/mach_wakecpu.h)0
-rw-r--r--include/asm-x86/mach-generic/irq_vectors_limits.h (renamed from include/asm-i386/mach-generic/irq_vectors_limits.h)0
-rw-r--r--include/asm-x86/mach-generic/mach_apic.h (renamed from include/asm-i386/mach-generic/mach_apic.h)0
-rw-r--r--include/asm-x86/mach-generic/mach_apicdef.h (renamed from include/asm-i386/mach-generic/mach_apicdef.h)0
-rw-r--r--include/asm-x86/mach-generic/mach_ipi.h (renamed from include/asm-i386/mach-generic/mach_ipi.h)0
-rw-r--r--include/asm-x86/mach-generic/mach_mpparse.h (renamed from include/asm-i386/mach-generic/mach_mpparse.h)0
-rw-r--r--include/asm-x86/mach-generic/mach_mpspec.h (renamed from include/asm-i386/mach-generic/mach_mpspec.h)0
-rw-r--r--include/asm-x86/mach-numaq/mach_apic.h (renamed from include/asm-i386/mach-numaq/mach_apic.h)0
-rw-r--r--include/asm-x86/mach-numaq/mach_apicdef.h (renamed from include/asm-i386/mach-numaq/mach_apicdef.h)0
-rw-r--r--include/asm-x86/mach-numaq/mach_ipi.h (renamed from include/asm-i386/mach-numaq/mach_ipi.h)0
-rw-r--r--include/asm-x86/mach-numaq/mach_mpparse.h (renamed from include/asm-i386/mach-numaq/mach_mpparse.h)0
-rw-r--r--include/asm-x86/mach-numaq/mach_mpspec.h (renamed from include/asm-i386/mach-numaq/mach_mpspec.h)0
-rw-r--r--include/asm-x86/mach-numaq/mach_wakecpu.h (renamed from include/asm-i386/mach-numaq/mach_wakecpu.h)0
-rw-r--r--include/asm-x86/mach-summit/irq_vectors_limits.h (renamed from include/asm-i386/mach-summit/irq_vectors_limits.h)0
-rw-r--r--include/asm-x86/mach-summit/mach_apic.h (renamed from include/asm-i386/mach-summit/mach_apic.h)0
-rw-r--r--include/asm-x86/mach-summit/mach_apicdef.h (renamed from include/asm-i386/mach-summit/mach_apicdef.h)0
-rw-r--r--include/asm-x86/mach-summit/mach_ipi.h (renamed from include/asm-i386/mach-summit/mach_ipi.h)0
-rw-r--r--include/asm-x86/mach-summit/mach_mpparse.h (renamed from include/asm-i386/mach-summit/mach_mpparse.h)0
-rw-r--r--include/asm-x86/mach-summit/mach_mpspec.h (renamed from include/asm-i386/mach-summit/mach_mpspec.h)0
-rw-r--r--include/asm-x86/mach-visws/cobalt.h (renamed from include/asm-i386/mach-visws/cobalt.h)0
-rw-r--r--include/asm-x86/mach-visws/entry_arch.h (renamed from include/asm-i386/mach-visws/entry_arch.h)0
-rw-r--r--include/asm-x86/mach-visws/irq_vectors.h (renamed from include/asm-i386/mach-visws/irq_vectors.h)0
-rw-r--r--include/asm-x86/mach-visws/lithium.h (renamed from include/asm-i386/mach-visws/lithium.h)0
-rw-r--r--include/asm-x86/mach-visws/mach_apic.h (renamed from include/asm-i386/mach-visws/mach_apic.h)0
-rw-r--r--include/asm-x86/mach-visws/mach_apicdef.h (renamed from include/asm-i386/mach-visws/mach_apicdef.h)0
-rw-r--r--include/asm-x86/mach-visws/piix4.h (renamed from include/asm-i386/mach-visws/piix4.h)0
-rw-r--r--include/asm-x86/mach-visws/setup_arch.h (renamed from include/asm-i386/mach-visws/setup_arch.h)0
-rw-r--r--include/asm-x86/mach-visws/smpboot_hooks.h (renamed from include/asm-i386/mach-visws/smpboot_hooks.h)0
-rw-r--r--include/asm-x86/mach-voyager/do_timer.h (renamed from include/asm-i386/mach-voyager/do_timer.h)0
-rw-r--r--include/asm-x86/mach-voyager/entry_arch.h (renamed from include/asm-i386/mach-voyager/entry_arch.h)0
-rw-r--r--include/asm-x86/mach-voyager/irq_vectors.h (renamed from include/asm-i386/mach-voyager/irq_vectors.h)0
-rw-r--r--include/asm-x86/mach-voyager/setup_arch.h (renamed from include/asm-i386/mach-voyager/setup_arch.h)0
-rw-r--r--include/asm-x86/mach_apic.h (renamed from include/asm-x86_64/mach_apic.h)0
-rw-r--r--include/asm-x86/math_emu.h (renamed from include/asm-i386/math_emu.h)0
-rw-r--r--include/asm-x86/mc146818rtc.h5
-rw-r--r--include/asm-x86/mc146818rtc_32.h (renamed from include/asm-i386/mc146818rtc.h)0
-rw-r--r--include/asm-x86/mc146818rtc_64.h (renamed from include/asm-x86_64/mc146818rtc.h)0
-rw-r--r--include/asm-x86/mca.h (renamed from include/asm-i386/mca.h)0
-rw-r--r--include/asm-x86/mca_dma.h (renamed from include/asm-i386/mca_dma.h)0
-rw-r--r--include/asm-x86/mce.h5
-rw-r--r--include/asm-x86/mce_32.h (renamed from include/asm-i386/mce.h)0
-rw-r--r--include/asm-x86/mce_64.h (renamed from include/asm-x86_64/mce.h)0
-rw-r--r--include/asm-x86/mman.h13
-rw-r--r--include/asm-x86/mman_32.h (renamed from include/asm-i386/mman.h)0
-rw-r--r--include/asm-x86/mman_64.h (renamed from include/asm-x86_64/mman.h)0
-rw-r--r--include/asm-x86/mmsegment.h (renamed from include/asm-x86_64/mmsegment.h)0
-rw-r--r--include/asm-x86/mmu.h5
-rw-r--r--include/asm-x86/mmu_32.h (renamed from include/asm-i386/mmu.h)0
-rw-r--r--include/asm-x86/mmu_64.h (renamed from include/asm-x86_64/mmu.h)0
-rw-r--r--include/asm-x86/mmu_context.h5
-rw-r--r--include/asm-x86/mmu_context_32.h (renamed from include/asm-i386/mmu_context.h)0
-rw-r--r--include/asm-x86/mmu_context_64.h (renamed from include/asm-x86_64/mmu_context.h)0
-rw-r--r--include/asm-x86/mmx.h (renamed from include/asm-i386/mmx.h)0
-rw-r--r--include/asm-x86/mmzone.h5
-rw-r--r--include/asm-x86/mmzone_32.h (renamed from include/asm-i386/mmzone.h)0
-rw-r--r--include/asm-x86/mmzone_64.h (renamed from include/asm-x86_64/mmzone.h)0
-rw-r--r--include/asm-x86/module.h5
-rw-r--r--include/asm-x86/module_32.h (renamed from include/asm-i386/module.h)0
-rw-r--r--include/asm-x86/module_64.h (renamed from include/asm-x86_64/module.h)0
-rw-r--r--include/asm-x86/mpspec.h5
-rw-r--r--include/asm-x86/mpspec_32.h (renamed from include/asm-i386/mpspec.h)0
-rw-r--r--include/asm-x86/mpspec_64.h (renamed from include/asm-x86_64/mpspec.h)0
-rw-r--r--include/asm-x86/mpspec_def.h (renamed from include/asm-i386/mpspec_def.h)0
-rw-r--r--include/asm-x86/msgbuf.h13
-rw-r--r--include/asm-x86/msgbuf_32.h (renamed from include/asm-i386/msgbuf.h)0
-rw-r--r--include/asm-x86/msgbuf_64.h (renamed from include/asm-x86_64/msgbuf.h)0
-rw-r--r--include/asm-x86/msidef.h (renamed from include/asm-i386/msidef.h)0
-rw-r--r--include/asm-x86/msr-index.h (renamed from include/asm-i386/msr-index.h)0
-rw-r--r--include/asm-x86/msr.h13
-rw-r--r--include/asm-x86/msr_32.h (renamed from include/asm-i386/msr.h)0
-rw-r--r--include/asm-x86/msr_64.h (renamed from include/asm-x86_64/msr.h)0
-rw-r--r--include/asm-x86/mtrr.h13
-rw-r--r--include/asm-x86/mtrr_32.h (renamed from include/asm-i386/mtrr.h)0
-rw-r--r--include/asm-x86/mtrr_64.h (renamed from include/asm-x86_64/mtrr.h)0
-rw-r--r--include/asm-x86/mutex.h5
-rw-r--r--include/asm-x86/mutex_32.h (renamed from include/asm-i386/mutex.h)0
-rw-r--r--include/asm-x86/mutex_64.h (renamed from include/asm-x86_64/mutex.h)0
-rw-r--r--include/asm-x86/namei.h5
-rw-r--r--include/asm-x86/namei_32.h (renamed from include/asm-i386/namei.h)0
-rw-r--r--include/asm-x86/namei_64.h (renamed from include/asm-x86_64/namei.h)0
-rw-r--r--include/asm-x86/nmi.h5
-rw-r--r--include/asm-x86/nmi_32.h (renamed from include/asm-i386/nmi.h)0
-rw-r--r--include/asm-x86/nmi_64.h (renamed from include/asm-x86_64/nmi.h)0
-rw-r--r--include/asm-x86/numa.h5
-rw-r--r--include/asm-x86/numa_32.h (renamed from include/asm-i386/numa.h)0
-rw-r--r--include/asm-x86/numa_64.h (renamed from include/asm-x86_64/numa.h)0
-rw-r--r--include/asm-x86/numaq.h (renamed from include/asm-i386/numaq.h)0
-rw-r--r--include/asm-x86/page.h13
-rw-r--r--include/asm-x86/page_32.h (renamed from include/asm-i386/page.h)0
-rw-r--r--include/asm-x86/page_64.h (renamed from include/asm-x86_64/page.h)0
-rw-r--r--include/asm-x86/param.h13
-rw-r--r--include/asm-x86/param_32.h (renamed from include/asm-i386/param.h)0
-rw-r--r--include/asm-x86/param_64.h (renamed from include/asm-x86_64/param.h)0
-rw-r--r--include/asm-x86/paravirt.h (renamed from include/asm-i386/paravirt.h)0
-rw-r--r--include/asm-x86/parport.h5
-rw-r--r--include/asm-x86/parport_32.h (renamed from include/asm-i386/parport.h)0
-rw-r--r--include/asm-x86/parport_64.h (renamed from include/asm-x86_64/parport.h)0
-rw-r--r--include/asm-x86/pci-direct.h (renamed from include/asm-x86_64/pci-direct.h)0
-rw-r--r--include/asm-x86/pci.h5
-rw-r--r--include/asm-x86/pci_32.h (renamed from include/asm-i386/pci.h)0
-rw-r--r--include/asm-x86/pci_64.h (renamed from include/asm-x86_64/pci.h)0
-rw-r--r--include/asm-x86/pda.h (renamed from include/asm-x86_64/pda.h)0
-rw-r--r--include/asm-x86/percpu.h5
-rw-r--r--include/asm-x86/percpu_32.h (renamed from include/asm-i386/percpu.h)0
-rw-r--r--include/asm-x86/percpu_64.h (renamed from include/asm-x86_64/percpu.h)0
-rw-r--r--include/asm-x86/pgalloc.h5
-rw-r--r--include/asm-x86/pgalloc_32.h (renamed from include/asm-i386/pgalloc.h)0
-rw-r--r--include/asm-x86/pgalloc_64.h (renamed from include/asm-x86_64/pgalloc.h)0
-rw-r--r--include/asm-x86/pgtable-2level-defs.h (renamed from include/asm-i386/pgtable-2level-defs.h)0
-rw-r--r--include/asm-x86/pgtable-2level.h (renamed from include/asm-i386/pgtable-2level.h)0
-rw-r--r--include/asm-x86/pgtable-3level-defs.h (renamed from include/asm-i386/pgtable-3level-defs.h)0
-rw-r--r--include/asm-x86/pgtable-3level.h (renamed from include/asm-i386/pgtable-3level.h)0
-rw-r--r--include/asm-x86/pgtable.h5
-rw-r--r--include/asm-x86/pgtable_32.h (renamed from include/asm-i386/pgtable.h)0
-rw-r--r--include/asm-x86/pgtable_64.h (renamed from include/asm-x86_64/pgtable.h)0
-rw-r--r--include/asm-x86/poll.h (renamed from include/asm-i386/poll.h)0
-rw-r--r--include/asm-x86/posix_types.h13
-rw-r--r--include/asm-x86/posix_types_32.h (renamed from include/asm-i386/posix_types.h)0
-rw-r--r--include/asm-x86/posix_types_64.h (renamed from include/asm-x86_64/posix_types.h)0
-rw-r--r--include/asm-x86/prctl.h (renamed from include/asm-x86_64/prctl.h)0
-rw-r--r--include/asm-x86/processor-cyrix.h (renamed from include/asm-i386/processor-cyrix.h)0
-rw-r--r--include/asm-x86/processor-flags.h (renamed from include/asm-i386/processor-flags.h)0
-rw-r--r--include/asm-x86/processor.h5
-rw-r--r--include/asm-x86/processor_32.h (renamed from include/asm-i386/processor.h)0
-rw-r--r--include/asm-x86/processor_64.h (renamed from include/asm-x86_64/processor.h)0
-rw-r--r--include/asm-x86/proto.h (renamed from include/asm-x86_64/proto.h)0
-rw-r--r--include/asm-x86/ptrace-abi.h13
-rw-r--r--include/asm-x86/ptrace-abi_32.h (renamed from include/asm-i386/ptrace-abi.h)0
-rw-r--r--include/asm-x86/ptrace-abi_64.h (renamed from include/asm-x86_64/ptrace-abi.h)0
-rw-r--r--include/asm-x86/ptrace.h13
-rw-r--r--include/asm-x86/ptrace_32.h (renamed from include/asm-i386/ptrace.h)0
-rw-r--r--include/asm-x86/ptrace_64.h (renamed from include/asm-x86_64/ptrace.h)0
-rw-r--r--include/asm-x86/reboot.h (renamed from include/asm-i386/reboot.h)0
-rw-r--r--include/asm-x86/reboot_fixups.h (renamed from include/asm-i386/reboot_fixups.h)0
-rw-r--r--include/asm-x86/required-features.h5
-rw-r--r--include/asm-x86/required-features_32.h (renamed from include/asm-i386/required-features.h)0
-rw-r--r--include/asm-x86/required-features_64.h (renamed from include/asm-x86_64/required-features.h)0
-rw-r--r--include/asm-x86/resource.h13
-rw-r--r--include/asm-x86/resource_32.h (renamed from include/asm-i386/resource.h)0
-rw-r--r--include/asm-x86/resource_64.h (renamed from include/asm-x86_64/resource.h)0
-rw-r--r--include/asm-x86/resume-trace.h5
-rw-r--r--include/asm-x86/resume-trace_32.h (renamed from include/asm-i386/resume-trace.h)0
-rw-r--r--include/asm-x86/resume-trace_64.h (renamed from include/asm-x86_64/resume-trace.h)0
-rw-r--r--include/asm-x86/rio.h (renamed from include/asm-x86_64/rio.h)0
-rw-r--r--include/asm-x86/rtc.h5
-rw-r--r--include/asm-x86/rtc_32.h (renamed from include/asm-i386/rtc.h)0
-rw-r--r--include/asm-x86/rtc_64.h (renamed from include/asm-x86_64/rtc.h)0
-rw-r--r--include/asm-x86/rwlock.h5
-rw-r--r--include/asm-x86/rwlock_32.h (renamed from include/asm-i386/rwlock.h)0
-rw-r--r--include/asm-x86/rwlock_64.h (renamed from include/asm-x86_64/rwlock.h)0
-rw-r--r--include/asm-x86/rwsem.h (renamed from include/asm-i386/rwsem.h)0
-rw-r--r--include/asm-x86/scatterlist.h5
-rw-r--r--include/asm-x86/scatterlist_32.h (renamed from include/asm-i386/scatterlist.h)0
-rw-r--r--include/asm-x86/scatterlist_64.h (renamed from include/asm-x86_64/scatterlist.h)0
-rw-r--r--include/asm-x86/seccomp.h5
-rw-r--r--include/asm-x86/seccomp_32.h (renamed from include/asm-i386/seccomp.h)0
-rw-r--r--include/asm-x86/seccomp_64.h (renamed from include/asm-x86_64/seccomp.h)0
-rw-r--r--include/asm-x86/sections.h5
-rw-r--r--include/asm-x86/sections_32.h (renamed from include/asm-i386/sections.h)0
-rw-r--r--include/asm-x86/sections_64.h (renamed from include/asm-x86_64/sections.h)0
-rw-r--r--include/asm-x86/segment.h5
-rw-r--r--include/asm-x86/segment_32.h (renamed from include/asm-i386/segment.h)0
-rw-r--r--include/asm-x86/segment_64.h (renamed from include/asm-x86_64/segment.h)0
-rw-r--r--include/asm-x86/semaphore.h5
-rw-r--r--include/asm-x86/semaphore_32.h (renamed from include/asm-i386/semaphore.h)0
-rw-r--r--include/asm-x86/semaphore_64.h (renamed from include/asm-x86_64/semaphore.h)0
-rw-r--r--include/asm-x86/sembuf.h13
-rw-r--r--include/asm-x86/sembuf_32.h (renamed from include/asm-i386/sembuf.h)0
-rw-r--r--include/asm-x86/sembuf_64.h (renamed from include/asm-x86_64/sembuf.h)0
-rw-r--r--include/asm-x86/serial.h5
-rw-r--r--include/asm-x86/serial_32.h (renamed from include/asm-i386/serial.h)0
-rw-r--r--include/asm-x86/serial_64.h (renamed from include/asm-x86_64/serial.h)0
-rw-r--r--include/asm-x86/setup.h13
-rw-r--r--include/asm-x86/setup_32.h (renamed from include/asm-i386/setup.h)0
-rw-r--r--include/asm-x86/setup_64.h (renamed from include/asm-x86_64/setup.h)0
-rw-r--r--include/asm-x86/shmbuf.h13
-rw-r--r--include/asm-x86/shmbuf_32.h (renamed from include/asm-i386/shmbuf.h)0
-rw-r--r--include/asm-x86/shmbuf_64.h (renamed from include/asm-x86_64/shmbuf.h)0
-rw-r--r--include/asm-x86/shmparam.h13
-rw-r--r--include/asm-x86/shmparam_32.h (renamed from include/asm-i386/shmparam.h)0
-rw-r--r--include/asm-x86/shmparam_64.h (renamed from include/asm-x86_64/shmparam.h)0
-rw-r--r--include/asm-x86/sigcontext.h13
-rw-r--r--include/asm-x86/sigcontext32.h (renamed from include/asm-x86_64/sigcontext32.h)0
-rw-r--r--include/asm-x86/sigcontext_32.h (renamed from include/asm-i386/sigcontext.h)0
-rw-r--r--include/asm-x86/sigcontext_64.h (renamed from include/asm-x86_64/sigcontext.h)0
-rw-r--r--include/asm-x86/siginfo.h13
-rw-r--r--include/asm-x86/siginfo_32.h (renamed from include/asm-i386/siginfo.h)0
-rw-r--r--include/asm-x86/siginfo_64.h (renamed from include/asm-x86_64/siginfo.h)0
-rw-r--r--include/asm-x86/signal.h13
-rw-r--r--include/asm-x86/signal_32.h (renamed from include/asm-i386/signal.h)0
-rw-r--r--include/asm-x86/signal_64.h (renamed from include/asm-x86_64/signal.h)0
-rw-r--r--include/asm-x86/smp.h5
-rw-r--r--include/asm-x86/smp_32.h (renamed from include/asm-i386/smp.h)0
-rw-r--r--include/asm-x86/smp_64.h (renamed from include/asm-x86_64/smp.h)0
-rw-r--r--include/asm-x86/socket.h (renamed from include/asm-i386/socket.h)0
-rw-r--r--include/asm-x86/sockios.h13
-rw-r--r--include/asm-x86/sockios_32.h (renamed from include/asm-i386/sockios.h)0
-rw-r--r--include/asm-x86/sockios_64.h (renamed from include/asm-x86_64/sockios.h)0
-rw-r--r--include/asm-x86/sparsemem.h5
-rw-r--r--include/asm-x86/sparsemem_32.h (renamed from include/asm-i386/sparsemem.h)0
-rw-r--r--include/asm-x86/sparsemem_64.h (renamed from include/asm-x86_64/sparsemem.h)0
-rw-r--r--include/asm-x86/spinlock.h5
-rw-r--r--include/asm-x86/spinlock_32.h (renamed from include/asm-i386/spinlock.h)0
-rw-r--r--include/asm-x86/spinlock_64.h (renamed from include/asm-x86_64/spinlock.h)0
-rw-r--r--include/asm-x86/spinlock_types.h (renamed from include/asm-i386/spinlock_types.h)0
-rw-r--r--include/asm-x86/srat.h (renamed from include/asm-i386/srat.h)0
-rw-r--r--include/asm-x86/stacktrace.h (renamed from include/asm-x86_64/stacktrace.h)0
-rw-r--r--include/asm-x86/stat.h13
-rw-r--r--include/asm-x86/stat_32.h (renamed from include/asm-i386/stat.h)0
-rw-r--r--include/asm-x86/stat_64.h (renamed from include/asm-x86_64/stat.h)0
-rw-r--r--include/asm-x86/statfs.h13
-rw-r--r--include/asm-x86/statfs_32.h (renamed from include/asm-i386/statfs.h)0
-rw-r--r--include/asm-x86/statfs_64.h (renamed from include/asm-x86_64/statfs.h)0
-rw-r--r--include/asm-x86/string.h5
-rw-r--r--include/asm-x86/string_32.h (renamed from include/asm-i386/string.h)0
-rw-r--r--include/asm-x86/string_64.h (renamed from include/asm-x86_64/string.h)0
-rw-r--r--include/asm-x86/suspend.h5
-rw-r--r--include/asm-x86/suspend_32.h (renamed from include/asm-i386/suspend.h)0
-rw-r--r--include/asm-x86/suspend_64.h (renamed from include/asm-x86_64/suspend.h)0
-rw-r--r--include/asm-x86/swiotlb.h (renamed from include/asm-x86_64/swiotlb.h)0
-rw-r--r--include/asm-x86/sync_bitops.h (renamed from include/asm-i386/sync_bitops.h)0
-rw-r--r--include/asm-x86/system.h5
-rw-r--r--include/asm-x86/system_32.h (renamed from include/asm-i386/system.h)0
-rw-r--r--include/asm-x86/system_64.h (renamed from include/asm-x86_64/system.h)0
-rw-r--r--include/asm-x86/tce.h (renamed from include/asm-x86_64/tce.h)0
-rw-r--r--include/asm-x86/termbits.h13
-rw-r--r--include/asm-x86/termbits_32.h (renamed from include/asm-i386/termbits.h)0
-rw-r--r--include/asm-x86/termbits_64.h (renamed from include/asm-x86_64/termbits.h)0
-rw-r--r--include/asm-x86/termios.h13
-rw-r--r--include/asm-x86/termios_32.h90
-rw-r--r--include/asm-x86/termios_64.h (renamed from include/asm-x86_64/termios.h)0
-rw-r--r--include/asm-x86/therm_throt.h (renamed from include/asm-i386/therm_throt.h)0
-rw-r--r--include/asm-x86/thread_info.h5
-rw-r--r--include/asm-x86/thread_info_32.h (renamed from include/asm-i386/thread_info.h)0
-rw-r--r--include/asm-x86/thread_info_64.h (renamed from include/asm-x86_64/thread_info.h)0
-rw-r--r--include/asm-x86/time.h (renamed from include/asm-i386/time.h)0
-rw-r--r--include/asm-x86/timer.h (renamed from include/asm-i386/timer.h)0
-rw-r--r--include/asm-x86/timex.h5
-rw-r--r--include/asm-x86/timex_32.h (renamed from include/asm-i386/timex.h)0
-rw-r--r--include/asm-x86/timex_64.h (renamed from include/asm-x86_64/timex.h)0
-rw-r--r--include/asm-x86/tlb.h5
-rw-r--r--include/asm-x86/tlb_32.h (renamed from include/asm-i386/tlb.h)0
-rw-r--r--include/asm-x86/tlb_64.h (renamed from include/asm-x86_64/tlb.h)0
-rw-r--r--include/asm-x86/tlbflush.h5
-rw-r--r--include/asm-x86/tlbflush_32.h (renamed from include/asm-i386/tlbflush.h)0
-rw-r--r--include/asm-x86/tlbflush_64.h (renamed from include/asm-x86_64/tlbflush.h)0
-rw-r--r--include/asm-x86/topology.h5
-rw-r--r--include/asm-x86/topology_32.h (renamed from include/asm-i386/topology.h)0
-rw-r--r--include/asm-x86/topology_64.h (renamed from include/asm-x86_64/topology.h)0
-rw-r--r--include/asm-x86/tsc.h (renamed from include/asm-i386/tsc.h)0
-rw-r--r--include/asm-x86/types.h13
-rw-r--r--include/asm-x86/types_32.h (renamed from include/asm-i386/types.h)0
-rw-r--r--include/asm-x86/types_64.h (renamed from include/asm-x86_64/types.h)0
-rw-r--r--include/asm-x86/uaccess.h5
-rw-r--r--include/asm-x86/uaccess_32.h (renamed from include/asm-i386/uaccess.h)0
-rw-r--r--include/asm-x86/uaccess_64.h (renamed from include/asm-x86_64/uaccess.h)0
-rw-r--r--include/asm-x86/ucontext.h13
-rw-r--r--include/asm-x86/ucontext_32.h (renamed from include/asm-i386/ucontext.h)0
-rw-r--r--include/asm-x86/ucontext_64.h (renamed from include/asm-x86_64/ucontext.h)0
-rw-r--r--include/asm-x86/unaligned.h5
-rw-r--r--include/asm-x86/unaligned_32.h (renamed from include/asm-i386/unaligned.h)0
-rw-r--r--include/asm-x86/unaligned_64.h (renamed from include/asm-x86_64/unaligned.h)0
-rw-r--r--include/asm-x86/unistd.h13
-rw-r--r--include/asm-x86/unistd_32.h (renamed from include/asm-i386/unistd.h)0
-rw-r--r--include/asm-x86/unistd_64.h (renamed from include/asm-x86_64/unistd.h)0
-rw-r--r--include/asm-x86/unwind.h5
-rw-r--r--include/asm-x86/unwind_32.h (renamed from include/asm-i386/unwind.h)0
-rw-r--r--include/asm-x86/unwind_64.h (renamed from include/asm-x86_64/unwind.h)0
-rw-r--r--include/asm-x86/user.h13
-rw-r--r--include/asm-x86/user32.h (renamed from include/asm-x86_64/user32.h)0
-rw-r--r--include/asm-x86/user_32.h (renamed from include/asm-i386/user.h)0
-rw-r--r--include/asm-x86/user_64.h (renamed from include/asm-x86_64/user.h)0
-rw-r--r--include/asm-x86/vga.h (renamed from include/asm-i386/vga.h)0
-rw-r--r--include/asm-x86/vgtod.h (renamed from include/asm-x86_64/vgtod.h)0
-rw-r--r--include/asm-x86/vic.h (renamed from include/asm-i386/vic.h)0
-rw-r--r--include/asm-x86/vm86.h (renamed from include/asm-i386/vm86.h)0
-rw-r--r--include/asm-x86/vmi.h (renamed from include/asm-i386/vmi.h)0
-rw-r--r--include/asm-x86/vmi_time.h (renamed from include/asm-i386/vmi_time.h)0
-rw-r--r--include/asm-x86/voyager.h (renamed from include/asm-i386/voyager.h)0
-rw-r--r--include/asm-x86/vsyscall.h (renamed from include/asm-x86_64/vsyscall.h)0
-rw-r--r--include/asm-x86/vsyscall32.h (renamed from include/asm-x86_64/vsyscall32.h)0
-rw-r--r--include/asm-x86/xen/hypercall.h (renamed from include/asm-i386/xen/hypercall.h)0
-rw-r--r--include/asm-x86/xen/hypervisor.h (renamed from include/asm-i386/xen/hypervisor.h)0
-rw-r--r--include/asm-x86/xen/interface.h (renamed from include/asm-i386/xen/interface.h)0
-rw-r--r--include/asm-x86/xor.h5
-rw-r--r--include/asm-x86/xor_32.h (renamed from include/asm-i386/xor.h)0
-rw-r--r--include/asm-x86/xor_64.h (renamed from include/asm-x86_64/xor.h)0
-rw-r--r--include/asm-x86_64/Kbuild21
-rw-r--r--include/asm-x86_64/boot.h1
-rw-r--r--include/asm-x86_64/bootparam.h1
-rw-r--r--include/asm-x86_64/cpu.h1
-rw-r--r--include/asm-x86_64/cpufeature.h30
-rw-r--r--include/asm-x86_64/emergency-restart.h6
-rw-r--r--include/asm-x86_64/fcntl.h1
-rw-r--r--include/asm-x86_64/hpet.h18
-rw-r--r--include/asm-x86_64/hypertransport.h1
-rw-r--r--include/asm-x86_64/ide.h1
-rw-r--r--include/asm-x86_64/ioctl.h1
-rw-r--r--include/asm-x86_64/ist.h1
-rw-r--r--include/asm-x86_64/msidef.h1
-rw-r--r--include/asm-x86_64/msr-index.h1
-rw-r--r--include/asm-x86_64/node.h1
-rw-r--r--include/asm-x86_64/poll.h1
-rw-r--r--include/asm-x86_64/processor-flags.h1
-rw-r--r--include/asm-x86_64/socket.h55
-rw-r--r--include/asm-x86_64/spinlock_types.h20
-rw-r--r--include/asm-x86_64/therm_throt.h1
-rw-r--r--include/asm-x86_64/tsc.h1
-rw-r--r--include/asm-x86_64/vga.h20
-rw-r--r--include/linux/i2c-id.h2
-rw-r--r--include/linux/ivtv.h72
-rw-r--r--include/linux/ivtvfb.h42
-rw-r--r--include/linux/mmc/card.h32
-rw-r--r--include/linux/mmc/core.h63
-rw-r--r--include/linux/mmc/host.h39
-rw-r--r--include/linux/mmc/mmc.h39
-rw-r--r--include/linux/mmc/sdio.h159
-rw-r--r--include/linux/mmc/sdio_func.h153
-rw-r--r--include/linux/mmc/sdio_ids.h23
-rw-r--r--include/linux/mod_devicetable.h11
-rw-r--r--include/linux/pci_ids.h2
-rw-r--r--include/linux/spi/mmc_spi.h33
-rw-r--r--include/linux/videodev2.h7
-rw-r--r--include/media/cx2341x.h2
-rw-r--r--include/media/ir-common.h1
-rw-r--r--include/media/ivtv.h65
-rw-r--r--include/media/saa7146.h1
-rw-r--r--include/media/saa7146_vv.h2
-rw-r--r--include/media/tuner-types.h4
-rw-r--r--include/media/tuner.h1
-rw-r--r--include/media/v4l2-chip-ident.h3
-rw-r--r--include/media/v4l2-dev.h16
-rw-r--r--include/media/v4l2-int-device.h278
-rw-r--r--include/media/video-buf.h289
-rw-r--r--include/media/videobuf-core.h236
-rw-r--r--include/media/videobuf-dma-sg.h122
-rw-r--r--include/media/videobuf-dvb.h (renamed from include/media/video-buf-dvb.h)0
-rw-r--r--include/media/videobuf-vmalloc.h41
-rwxr-xr-xscripts/checkstack.pl5
-rwxr-xr-xscripts/checksyscalls.sh2
-rw-r--r--scripts/mod/file2alias.c20
-rwxr-xr-xscripts/namespace.pl8
1559 files changed, 38680 insertions, 17692 deletions
diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt
index dbcedf5833e..2511a335abd 100644
--- a/Documentation/dvb/faq.txt
+++ b/Documentation/dvb/faq.txt
@@ -150,7 +150,7 @@ Some very frequently asked questions about linuxtv-dvb
- saa7146_vv: SAA7146 video and vbi functions. These are only needed
for full-featured cards.
- - video-buf: capture helper module for the saa7146_vv driver. This
+ - videobuf-dma-sg: capture helper module for the saa7146_vv driver. This
one is responsible to handle capture buffers.
- dvb-ttpci: The main driver for AV7110 based, full-featured
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 00928d2ecfb..675f75601ae 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -306,3 +306,11 @@ Why: In kernel tree version of driver is unmaintained. Sk98lin driver
Who: Stephen Hemminger <shemminger@linux-foundation.org>
---------------------------
+
+What: i386/x86_64 bzImage symlinks
+When: April 2008
+
+Why: The i386/x86_64 merge provides a symlink to the old bzImage
+ location so not yet updated user space tools, e.g. package
+ scripts, do not break.
+Who: Thomas Gleixner <tglx@linutronix.de>
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4d175c75124..a57c1f216b2 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -35,6 +35,7 @@ parameter is applicable:
APIC APIC support is enabled.
APM Advanced Power Management support is enabled.
AX25 Appropriate AX.25 support is enabled.
+ BLACKFIN Blackfin architecture is enabled.
DRM Direct Rendering Management support is enabled.
EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
EFI EFI Partitioning (GPT) is enabled
@@ -550,7 +551,7 @@ and is between 256 and 4096 characters. It is defined in the file
dtc3181e= [HW,SCSI]
- earlyprintk= [X86-32,X86-64,SH]
+ earlyprintk= [X86-32,X86-64,SH,BLACKFIN]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 73c5f1f3d5d..103e346c8b6 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -46,7 +46,7 @@ typedef uint32_t u32;
typedef uint16_t u16;
typedef uint8_t u8;
#include "../../include/linux/lguest_launcher.h"
-#include "../../include/asm-i386/e820.h"
+#include "../../include/asm-x86/e820_32.h"
/*:*/
#define PAGE_PRESENT 0x7 /* Present, RW, Execute */
diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv
index 177159c5f4c..d97cf7cc608 100644
--- a/Documentation/video4linux/CARDLIST.bttv
+++ b/Documentation/video4linux/CARDLIST.bttv
@@ -147,3 +147,4 @@
146 -> SSAI Ultrasound Video Interface [414a:5353]
147 -> VoodooTV 200 (USA) [121a:3000]
148 -> DViCO FusionHDTV 2 [dbc0:d200]
+149 -> Typhoon TV-Tuner PCI (50684)
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
new file mode 100644
index 00000000000..00cb646a4bd
--- /dev/null
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -0,0 +1,5 @@
+ 0 -> UNKNOWN/GENERIC [0070:3400]
+ 1 -> Hauppauge WinTV-HVR1800lp [0070:7600]
+ 2 -> Hauppauge WinTV-HVR1800 [0070:7800,0070:7801]
+ 3 -> Hauppauge WinTV-HVR1250 [0070:7911]
+ 4 -> DViCO FusionHDTV5 Express [18ac:d500]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 3f8aeab50a1..a14545300e4 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -88,11 +88,11 @@
87 -> ADS Instant TV Duo Cardbus PTV331 [0331:1421]
88 -> Tevion/KWorld DVB-T 220RF [17de:7201]
89 -> ELSA EX-VISION 700TV [1048:226c]
- 90 -> Kworld ATSC110 [17de:7350]
+ 90 -> Kworld ATSC110/115 [17de:7350,17de:7352]
91 -> AVerMedia A169 B [1461:7360]
92 -> AVerMedia A169 B1 [1461:6360]
93 -> Medion 7134 Bridge #2 [16be:0005]
- 94 -> LifeView FlyDVB-T Hybrid Cardbus [5168:3306,5168:3502]
+ 94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [5168:3306,5168:3502,4e42:3502]
95 -> LifeView FlyVIDEO3000 (NTSC) [5169:0138]
96 -> Medion Md8800 Quadro [16be:0007,16be:0008]
97 -> LifeView FlyDVB-S /Acorp TV134DS [5168:0300,4e42:0300]
@@ -115,3 +115,4 @@
114 -> KWorld DVB-T 210 [17de:7250]
115 -> Sabrent PCMCIA TV-PCB05 [0919:2003]
116 -> 10MOONS TM300 TV Card [1131:2304]
+117 -> Avermedia Super 007 [1461:f01d]
diff --git a/Kbuild b/Kbuild
index 56b8edf6a3b..1570d248ad9 100644
--- a/Kbuild
+++ b/Kbuild
@@ -8,11 +8,11 @@
# 1) Generate asm-offsets.h
#
-offsets-file := include/asm-$(ARCH)/asm-offsets.h
+offsets-file := include/asm-$(SRCARCH)/asm-offsets.h
always := $(offsets-file)
targets := $(offsets-file)
-targets += arch/$(ARCH)/kernel/asm-offsets.s
+targets += arch/$(SRCARCH)/kernel/asm-offsets.s
clean-files := $(addprefix $(objtree)/,$(targets))
# Default sed regexp - multiline due to syntax constraints
@@ -40,11 +40,11 @@ define cmd_offsets
endef
# We use internal kbuild rules to avoid the "is up to date" message from make
-arch/$(ARCH)/kernel/asm-offsets.s: arch/$(ARCH)/kernel/asm-offsets.c FORCE
+arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
-$(obj)/$(offsets-file): arch/$(ARCH)/kernel/asm-offsets.s Kbuild
+$(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s Kbuild
$(Q)mkdir -p $(dir $@)
$(call cmd,offsets)
diff --git a/MAINTAINERS b/MAINTAINERS
index 53144f4737f..60162706716 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -718,34 +718,8 @@ M: rpurdie@rpsys.net
S: Maintained
BLACKFIN ARCHITECTURE
-P: Aubrey Li
-M: aubrey.li@analog.com
-P: Bernd Schmidt
-M: bernd.schmidt@analog.com
P: Bryan Wu
M: bryan.wu@analog.com
-P: Grace Pan
-M: grace.pan@analog.com
-P: Marc Hoffman
-M: marc.hoffman@analog.com
-P: Michael Hennerich
-M: michael.hennerich@analog.com
-P: Mike Frysinger
-M: michael.frysinger@analog.com
-P: Jerry Zeng
-M: jerry.zeng@analog.com
-P: Jie Zhang
-M: jie.zhang@analog.com
-P: Robin Getz
-M: robin.getz@analog.com
-P: Roy Huang
-M: roy.huang@analog.com
-P: Sonic Zhang
-M: sonic.zhang@analog.com
-P: Vivi Li
-M: vivi.li@analog.com
-P: Yi Li
-M: yi.li@analog.com
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
W: http://blackfin.uclinux.org
S: Supported
@@ -2561,12 +2535,18 @@ L: linux-kernel@vger.kernel.org
W: http://www.atnf.csiro.au/~rgooch/linux/kernel-patches.html
S: Maintained
-MULTIMEDIA CARD (MMC) AND SECURE DIGITAL (SD) SUBSYSTEM
+MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
P: Pierre Ossman
M: drzeus-mmc@drzeus.cx
L: linux-kernel@vger.kernel.org
S: Maintained
+MULTIMEDIA CARD (MMC) ETC. OVER SPI
+P: David Brownell
+M: dbrownell@users.sourceforge.net
+L: linux-kernel@vger.kernel.org
+S: Odd fixes
+
MULTISOUND SOUND DRIVER
P: Andrew Veliath
M: andrewtv@usa.net
diff --git a/Makefile b/Makefile
index 4635a64da36..1274084c909 100644
--- a/Makefile
+++ b/Makefile
@@ -186,7 +186,8 @@ ARCH ?= $(SUBARCH)
CROSS_COMPILE ?=
# Architecture as present in compile.h
-UTS_MACHINE := $(ARCH)
+UTS_MACHINE := $(ARCH)
+SRCARCH := $(ARCH)
KCONFIG_CONFIG ?= .config
@@ -322,7 +323,7 @@ KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
-export ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
@@ -609,7 +610,7 @@ libs-y := $(libs-y1) $(libs-y2)
vmlinux-init := $(head-y) $(init-y)
vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
vmlinux-all := $(vmlinux-init) $(vmlinux-main)
-vmlinux-lds := arch/$(ARCH)/kernel/vmlinux.lds
+vmlinux-lds := arch/$(SRCARCH)/kernel/vmlinux.lds
export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
# Rule to link vmlinux - also used during CONFIG_KALLSYMS
@@ -862,7 +863,7 @@ ifneq ($(KBUILD_SRC),)
/bin/false; \
fi;
$(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
- $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
+ $(Q)ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm
endif
# prepare2 creates a makefile if using a separate output directory
@@ -894,9 +895,9 @@ export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
# before switching between archs anyway.
include/asm:
- @echo ' SYMLINK $@ -> include/asm-$(ARCH)'
+ @echo ' SYMLINK $@ -> include/asm-$(SRCARCH)'
$(Q)if [ ! -d include ]; then mkdir -p include; fi;
- @ln -fsn asm-$(ARCH) $@
+ @ln -fsn asm-$(SRCARCH) $@
# Generate some files
# ---------------------------------------------------------------------------
@@ -936,7 +937,8 @@ depend dep:
INSTALL_HDR_PATH=$(objtree)/usr
export INSTALL_HDR_PATH
-HDRARCHES=$(filter-out generic,$(patsubst $(srctree)/include/asm-%/Kbuild,%,$(wildcard $(srctree)/include/asm-*/Kbuild)))
+HDRFILTER=generic i386 x86_64
+HDRARCHES=$(filter-out $(HDRFILTER),$(patsubst $(srctree)/include/asm-%/Kbuild,%,$(wildcard $(srctree)/include/asm-*/Kbuild)))
PHONY += headers_install_all
headers_install_all: include/linux/version.h scripts_basic FORCE
@@ -947,11 +949,11 @@ headers_install_all: include/linux/version.h scripts_basic FORCE
PHONY += headers_install
headers_install: include/linux/version.h scripts_basic FORCE
- @if [ ! -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
- echo '*** Error: Headers not exportable for this architecture ($(ARCH))'; \
+ @if [ ! -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
+ echo '*** Error: Headers not exportable for this architecture ($(SRCARCH))'; \
exit 1 ; fi
$(Q)$(MAKE) $(build)=scripts scripts/unifdef
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst obj=include
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include
PHONY += headers_check_all
headers_check_all: headers_install_all
@@ -961,7 +963,7 @@ headers_check_all: headers_install_all
PHONY += headers_check
headers_check: headers_install
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst obj=include HDRCHECK=1
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include HDRCHECK=1
# ---------------------------------------------------------------------------
# Modules
@@ -1139,7 +1141,7 @@ help:
@echo ' cscope - Generate cscope index'
@echo ' kernelrelease - Output the release version string'
@echo ' kernelversion - Output the version stored in Makefile'
- @if [ -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
+ @if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
echo ' (default: $(INSTALL_HDR_PATH))'; \
fi
@@ -1147,7 +1149,7 @@ help:
@echo 'Static analysers'
@echo ' checkstack - Generate a list of stack hogs'
@echo ' namespacecheck - Name space analysis on compiled kernel'
- @if [ -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
+ @if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
echo ' headers_check - Sanity check on exported headers'; \
fi
@echo ''
@@ -1292,18 +1294,23 @@ ifeq ($(ALLSOURCE_ARCHS),)
ifeq ($(ARCH),um)
ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH)
else
-ALLINCLUDE_ARCHS := $(ARCH)
+ALLINCLUDE_ARCHS := $(SRCARCH)
endif
else
#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behavour.
ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
endif
+# Take care of arch/x86
+ifeq ($(ARCH), $(SRCARCH))
ALLSOURCE_ARCHS := $(ARCH)
+else
+ALLSOURCE_ARCHS := $(ARCH) $(SRCARCH)
+endif
define find-sources
( for ARCH in $(ALLSOURCE_ARCHS) ; do \
- find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \
+ find $(__srctree)arch/$${SRCARCH} $(RCS_FIND_IGNORE) \
-name $1 -print; \
done ; \
find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
@@ -1312,7 +1319,7 @@ define find-sources
\( -name config -o -name 'asm-*' \) -prune \
-o -name $1 -print; \
for ARCH in $(ALLINCLUDE_ARCHS) ; do \
- find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
+ find $(__srctree)include/asm-$${SRCARCH} $(RCS_FIND_IGNORE) \
-name $1 -print; \
done ; \
find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index da893c80d47..a9778c1587a 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -116,7 +116,7 @@ static struct platform_device *devices[] __initdata = {
};
#ifdef CONFIG_MMC_IMX
-static int mx1ads_mmc_card_present(void)
+static int mx1ads_mmc_card_present(struct device *dev)
{
/* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
return (SSR(1) & (1 << 20) ? 0 : 1);
diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
index f9b32a8eab9..b07ae63aa54 100644
--- a/arch/avr32/boards/atngw100/flash.c
+++ b/arch/avr32/boards/atngw100/flash.c
@@ -15,7 +15,7 @@
#include <asm/arch/smc.h>
-static struct smc_config flash_config __initdata = {
+static struct smc_timing flash_timing __initdata = {
.ncs_read_setup = 0,
.nrd_setup = 40,
.ncs_write_setup = 0,
@@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
.read_cycle = 120,
.write_cycle = 120,
+};
+static struct smc_config flash_config __initdata = {
.bus_width = 2,
.nrd_controlled = 1,
.nwe_controlled = 1,
@@ -82,6 +84,7 @@ static int __init atngw100_flash_init(void)
{
int ret;
+ smc_set_timing(&flash_config, &flash_timing);
ret = smc_set_configuration(0, &flash_config);
if (ret < 0) {
printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index ef801563bbf..52987c81d66 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -125,8 +125,11 @@ static struct platform_device ngw_gpio_leds = {
};
static struct i2c_gpio_platform_data i2c_gpio_data = {
- .sda_pin = GPIO_PIN_PA(6),
- .scl_pin = GPIO_PIN_PA(7),
+ .sda_pin = GPIO_PIN_PA(6),
+ .scl_pin = GPIO_PIN_PA(7),
+ .sda_is_open_drain = 1,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* close to 100 kHz */
};
static struct platform_device i2c_gpio_device = {
@@ -154,6 +157,7 @@ static int __init atngw100_init(void)
set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+ at32_add_device_usba(0, NULL);
for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
at32_select_gpio(ngw_leds[i].gpio,
@@ -161,8 +165,10 @@ static int __init atngw100_init(void)
}
platform_device_register(&ngw_gpio_leds);
- at32_select_gpio(i2c_gpio_data.sda_pin, 0);
- at32_select_gpio(i2c_gpio_data.scl_pin, 0);
+ at32_select_gpio(i2c_gpio_data.sda_pin,
+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ at32_select_gpio(i2c_gpio_data.scl_pin,
+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
platform_device_register(&i2c_gpio_device);
return 0;
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index c9981b731ef..6b9e466104a 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -241,6 +241,7 @@ static int __init atstk1002_init(void)
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
fbmem_start, fbmem_size);
#endif
+ at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
at32_add_device_ssc(0, ATMEL_SSC_TX);
#endif
diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
index aac4300cca1..3d0a102ad45 100644
--- a/arch/avr32/boards/atstk1000/flash.c
+++ b/arch/avr32/boards/atstk1000/flash.c
@@ -15,7 +15,7 @@
#include <asm/arch/smc.h>
-static struct smc_config flash_config __initdata = {
+static struct smc_timing flash_timing __initdata = {
.ncs_read_setup = 0,
.nrd_setup = 40,
.ncs_write_setup = 0,
@@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
.read_cycle = 120,
.write_cycle = 120,
+};
+static struct smc_config flash_config __initdata = {
.bus_width = 2,
.nrd_controlled = 1,
.nwe_controlled = 1,
@@ -82,6 +84,7 @@ static int __init atstk1000_flash_init(void)
{
int ret;
+ smc_set_timing(&flash_config, &flash_timing);
ret = smc_set_configuration(0, &flash_config);
if (ret < 0) {
printk(KERN_ERR "atstk1000: failed to set NOR flash timing\n");
diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
index 90e5afff54a..989fcd1fef7 100644
--- a/arch/avr32/kernel/Makefile
+++ b/arch/avr32/kernel/Makefile
@@ -11,8 +11,3 @@ obj-y += signal.o sys_avr32.o process.o time.o
obj-y += init_task.o switch_to.o cpu.o
obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
obj-$(CONFIG_KPROBES) += kprobes.o
-
-USE_STANDARD_AS_RULE := true
-
-%.lds: %.lds.c FORCE
- $(call if_changed_dep,cpp_lds_S)
diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 42657f1703b..ccadfd9b438 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -159,11 +159,18 @@ handle_vmalloc_miss:
.section .scall.text,"ax",@progbits
system_call:
+#ifdef CONFIG_PREEMPT
+ mask_interrupts
+#endif
pushm r12 /* r12_orig */
stmts --sp, r0-lr
- zero_fp
+
mfsr r0, SYSREG_RAR_SUP
mfsr r1, SYSREG_RSR_SUP
+#ifdef CONFIG_PREEMPT
+ unmask_interrupts
+#endif
+ zero_fp
stm --sp, r0-r1
/* check for syscall tracing */
@@ -638,6 +645,13 @@ irq_level\level:
stmts --sp,r0-lr
mfsr r8, rar_int\level
mfsr r9, rsr_int\level
+
+#ifdef CONFIG_PREEMPT
+ sub r11, pc, (. - system_call)
+ cp.w r11, r8
+ breq 4f
+#endif
+
pushm r8-r9
mov r11, sp
@@ -668,6 +682,16 @@ irq_level\level:
sub sp, -4 /* ignore r12_orig */
rete
+#ifdef CONFIG_PREEMPT
+4: mask_interrupts
+ mfsr r8, rsr_int\level
+ sbr r8, 16
+ mtsr rsr_int\level, r8
+ ldmts sp++, r0-lr
+ sub sp, -4 /* ignore r12_orig */
+ rete
+#endif
+
2: get_thread_info r0
ld.w r1, r0[TI_flags]
bld r1, TIF_CPU_GOING_TO_SLEEP
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index d08b0bc6b2b..4b4c1884e1c 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -248,7 +248,7 @@ static int __init early_parse_fbmem(char *p)
fbmem_size = memparse(p, &p);
if (*p == '@') {
- fbmem_start = memparse(p, &p);
+ fbmem_start = memparse(p + 1, &p);
ret = add_reserved_region(fbmem_start,
fbmem_start + fbmem_size - 1,
"Framebuffer");
diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
new file mode 100644
index 00000000000..ce9ac965988
--- /dev/null
+++ b/arch/avr32/kernel/vmlinux.lds.S
@@ -0,0 +1,143 @@
+/*
+ * AVR32 linker script for the Linux kernel
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define LOAD_OFFSET 0x00000000
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+
+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
+OUTPUT_ARCH(avr32)
+ENTRY(_start)
+
+/* Big endian */
+jiffies = jiffies_64 + 4;
+
+SECTIONS
+{
+ . = CONFIG_ENTRY_ADDRESS;
+ .init : AT(ADDR(.init) - LOAD_OFFSET) {
+ _stext = .;
+ __init_begin = .;
+ _sinittext = .;
+ *(.text.reset)
+ *(.init.text)
+ /*
+ * .exit.text is discarded at runtime, not
+ * link time, to deal with references from
+ * __bug_table
+ */
+ *(.exit.text)
+ _einittext = .;
+ . = ALIGN(4);
+ __tagtable_begin = .;
+ *(.taglist.init)
+ __tagtable_end = .;
+ *(.init.data)
+ . = ALIGN(16);
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ . = ALIGN(4);
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ __security_initcall_start = .;
+ *(.security_initcall.init)
+ __security_initcall_end = .;
+#ifdef CONFIG_BLK_DEV_INITRD
+ . = ALIGN(32);
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+#endif
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+ }
+
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
+ _evba = .;
+ _text = .;
+ *(.ex.text)
+ . = 0x50;
+ *(.tlbx.ex.text)
+ . = 0x60;
+ *(.tlbr.ex.text)
+ . = 0x70;
+ *(.tlbw.ex.text)
+ . = 0x100;
+ *(.scall.text)
+ *(.irq.text)
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+ _etext = .;
+ } = 0xd703d703
+
+ . = ALIGN(4);
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ }
+
+ BUG_TABLE
+
+ RODATA
+
+ . = ALIGN(THREAD_SIZE);
+
+ .data : AT(ADDR(.data) - LOAD_OFFSET) {
+ _data = .;
+ _sdata = .;
+ /*
+ * First, the init task union, aligned to an 8K boundary.
+ */
+ *(.data.init_task)
+
+ /* Then, the cacheline aligned data */
+ . = ALIGN(L1_CACHE_BYTES);
+ *(.data.cacheline_aligned)
+
+ /* And the rest... */
+ *(.data.rel*)
+ DATA_DATA
+ CONSTRUCTORS
+
+ _edata = .;
+ }
+
+
+ . = ALIGN(8);
+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+ __bss_start = .;
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(8);
+ __bss_stop = .;
+ _end = .;
+ }
+
+ /* When something in the kernel is NOT compiled as a module, the module
+ * cleanup code and data are put into these segments. Both can then be
+ * thrown away, as cleanup code is never called unless it's a module.
+ */
+ /DISCARD/ : {
+ *(.exit.data)
+ *(.exitcall.exit)
+ }
+
+ DWARF_DEBUG
+}
diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c
deleted file mode 100644
index db0438f35c0..00000000000
--- a/arch/avr32/kernel/vmlinux.lds.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * AVR32 linker script for the Linux kernel
- *
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define LOAD_OFFSET 0x00000000
-#include <asm-generic/vmlinux.lds.h>
-
-OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
-OUTPUT_ARCH(avr32)
-ENTRY(_start)
-
-/* Big endian */
-jiffies = jiffies_64 + 4;
-
-SECTIONS
-{
- . = CONFIG_ENTRY_ADDRESS;
- .init : AT(ADDR(.init) - LOAD_OFFSET) {
- _stext = .;
- __init_begin = .;
- _sinittext = .;
- *(.text.reset)
- *(.init.text)
- /*
- * .exit.text is discarded at runtime, not
- * link time, to deal with references from
- * __bug_table
- */
- *(.exit.text)
- _einittext = .;
- . = ALIGN(4);
- __tagtable_begin = .;
- *(.taglist.init)
- __tagtable_end = .;
- *(.init.data)
- . = ALIGN(16);
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- . = ALIGN(4);
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- __security_initcall_start = .;
- *(.security_initcall.init)
- __security_initcall_end = .;
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(32);
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
-#endif
- . = ALIGN(4096);
- __init_end = .;
- }
-
- . = ALIGN(8192);
- .text : AT(ADDR(.text) - LOAD_OFFSET) {
- _evba = .;
- _text = .;
- *(.ex.text)
- . = 0x50;
- *(.tlbx.ex.text)
- . = 0x60;
- *(.tlbr.ex.text)
- . = 0x70;
- *(.tlbw.ex.text)
- . = 0x100;
- *(.scall.text)
- *(.irq.text)
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- *(.fixup)
- *(.gnu.warning)
- _etext = .;
- } = 0xd703d703
-
- . = ALIGN(4);
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
-
- BUG_TABLE
-
- RODATA
-
- . = ALIGN(8192);
-
- .data : AT(ADDR(.data) - LOAD_OFFSET) {
- _data = .;
- _sdata = .;
- /*
- * First, the init task union, aligned to an 8K boundary.
- */
- *(.data.init_task)
-
- /* Then, the cacheline aligned data */
- . = ALIGN(32);
- *(.data.cacheline_aligned)
-
- /* And the rest... */
- *(.data.rel*)
- DATA_DATA
- CONSTRUCTORS
-
- _edata = .;
- }
-
-
- . = ALIGN(8);
- .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
- __bss_start = .;
- *(.bss)
- *(COMMON)
- . = ALIGN(8);
- __bss_stop = .;
- _end = .;
- }
-
- /* When something in the kernel is NOT compiled as a module, the module
- * cleanup code and data are put into these segments. Both can then be
- * thrown away, as cleanup code is never called unless it's a module.
- */
- /DISCARD/ : {
- *(.exit.data)
- *(.exitcall.exit)
- }
-
- DWARF_DEBUG
-}
diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
index 64cc5583ddf..f6d154ca4d2 100644
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/arch/avr32/mach-at32ap/at32ap7000.c
@@ -25,12 +25,6 @@
#include "pio.h"
#include "pm.h"
-/*
- * We can reduce the code size a bit by using a constant here. Since
- * this file is completely chip-specific, it's safe to not use
- * ioremap. Generic drivers should of course never do this.
- */
-#define AT32_PM_BASE 0xfff00000
#define PBMEM(base) \
{ \
@@ -1168,6 +1162,72 @@ at32_add_device_ssc(unsigned int id, unsigned int flags)
}
/* --------------------------------------------------------------------
+ * USB Device Controller
+ * -------------------------------------------------------------------- */
+static struct resource usba0_resource[] __initdata = {
+ {
+ .start = 0xff300000,
+ .end = 0xff3fffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 0xfff03000,
+ .end = 0xfff033ff,
+ .flags = IORESOURCE_MEM,
+ },
+ IRQ(31),
+};
+static struct clk usba0_pclk = {
+ .name = "pclk",
+ .parent = &pbb_clk,
+ .mode = pbb_clk_mode,
+ .get_rate = pbb_clk_get_rate,
+ .index = 12,
+};
+static struct clk usba0_hclk = {
+ .name = "hclk",
+ .parent = &hsb_clk,
+ .mode = hsb_clk_mode,
+ .get_rate = hsb_clk_get_rate,
+ .index = 6,
+};
+
+struct platform_device *__init
+at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
+{
+ struct platform_device *pdev;
+
+ if (id != 0)
+ return NULL;
+
+ pdev = platform_device_alloc("atmel_usba_udc", 0);
+ if (!pdev)
+ return NULL;
+
+ if (platform_device_add_resources(pdev, usba0_resource,
+ ARRAY_SIZE(usba0_resource)))
+ goto out_free_pdev;
+
+ if (data) {
+ if (platform_device_add_data(pdev, data, sizeof(*data)))
+ goto out_free_pdev;
+
+ if (data->vbus_pin != GPIO_PIN_NONE)
+ at32_select_gpio(data->vbus_pin, 0);
+ }
+
+ usba0_pclk.dev = &pdev->dev;
+ usba0_hclk.dev = &pdev->dev;
+
+ platform_device_add(pdev);
+
+ return pdev;
+
+out_free_pdev:
+ platform_device_put(pdev);
+ return NULL;
+}
+
+/* --------------------------------------------------------------------
* GCLK
* -------------------------------------------------------------------- */
static struct clk gclk0 = {
@@ -1252,6 +1312,8 @@ struct clk *at32_clock_list[] = {
&ssc0_pclk,
&ssc1_pclk,
&ssc2_pclk,
+ &usba0_hclk,
+ &usba0_pclk,
&gclk0,
&gclk1,
&gclk2,
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 0f8c89c9f83..4642117cc9a 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -150,3 +150,119 @@ struct clk *clk_get_parent(struct clk *clk)
return clk->parent;
}
EXPORT_SYMBOL(clk_get_parent);
+
+
+
+#ifdef CONFIG_DEBUG_FS
+
+/* /sys/kernel/debug/at32ap_clk */
+
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include "pm.h"
+
+
+#define NEST_DELTA 2
+#define NEST_MAX 6
+
+struct clkinf {
+ struct seq_file *s;
+ unsigned nest;
+};
+
+static void
+dump_clock(struct clk *parent, struct clkinf *r)
+{
+ unsigned nest = r->nest;
+ char buf[16 + NEST_MAX];
+ struct clk *clk;
+ unsigned i;
+
+ /* skip clocks coupled to devices that aren't registered */
+ if (parent->dev && !parent->dev->bus_id[0] && !parent->users)
+ return;
+
+ /* <nest spaces> name <pad to end> */
+ memset(buf, ' ', sizeof(buf) - 1);
+ buf[sizeof(buf) - 1] = 0;
+ i = strlen(parent->name);
+ memcpy(buf + nest, parent->name,
+ min(i, (unsigned)(sizeof(buf) - 1 - nest)));
+
+ seq_printf(r->s, "%s%c users=%2d %-3s %9ld Hz",
+ buf, parent->set_parent ? '*' : ' ',
+ parent->users,
+ parent->users ? "on" : "off", /* NOTE: not-paranoid!! */
+ clk_get_rate(parent));
+ if (parent->dev)
+ seq_printf(r->s, ", for %s", parent->dev->bus_id);
+ seq_printf(r->s, "\n");
+
+ /* cost of this scan is small, but not linear... */
+ r->nest = nest + NEST_DELTA;
+ for (i = 3; i < at32_nr_clocks; i++) {
+ clk = at32_clock_list[i];
+ if (clk->parent == parent)
+ dump_clock(clk, r);
+ }
+ r->nest = nest;
+}
+
+static int clk_show(struct seq_file *s, void *unused)
+{
+ struct clkinf r;
+ int i;
+
+ /* show all the power manager registers */
+ seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL));
+ seq_printf(s, "CKSEL = %8x\n", pm_readl(CKSEL));
+ seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK));
+ seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK));
+ seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK));
+ seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK));
+ seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL0));
+ seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL1));
+ seq_printf(s, "IMR = %8x\n", pm_readl(IMR));
+ for (i = 0; i < 8; i++) {
+ if (i == 5)
+ continue;
+ seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i)));
+ }
+
+ seq_printf(s, "\n");
+
+ /* show clock tree as derived from the three oscillators
+ * we "know" are at the head of the list
+ */
+ r.s = s;
+ r.nest = 0;
+ dump_clock(at32_clock_list[0], &r);
+ dump_clock(at32_clock_list[1], &r);
+ dump_clock(at32_clock_list[2], &r);
+
+ return 0;
+}
+
+static int clk_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, clk_show, NULL);
+}
+
+static const struct file_operations clk_operations = {
+ .open = clk_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init clk_debugfs_init(void)
+{
+ (void) debugfs_create_file("at32ap_clk", S_IFREG | S_IRUGO,
+ NULL, NULL, &clk_operations);
+
+ return 0;
+}
+postcore_initcall(clk_debugfs_init);
+
+#endif
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index 5e22a750632..704607fbcc6 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -29,16 +29,25 @@ struct hsmc {
static struct hsmc *hsmc;
-int smc_set_configuration(int cs, const struct smc_config *config)
+void smc_set_timing(struct smc_config *config,
+ const struct smc_timing *timing)
{
+ int recover;
+ int cycle;
+
unsigned long mul;
- unsigned long offset;
- u32 setup, pulse, cycle, mode;
- if (!hsmc)
- return -ENODEV;
- if (cs >= NR_CHIP_SELECTS)
- return -EINVAL;
+ /* Reset all SMC timings */
+ config->ncs_read_setup = 0;
+ config->nrd_setup = 0;
+ config->ncs_write_setup = 0;
+ config->nwe_setup = 0;
+ config->ncs_read_pulse = 0;
+ config->nrd_pulse = 0;
+ config->ncs_write_pulse = 0;
+ config->nwe_pulse = 0;
+ config->read_cycle = 0;
+ config->write_cycle = 0;
/*
* cycles = x / T = x * f
@@ -50,16 +59,102 @@ int smc_set_configuration(int cs, const struct smc_config *config)
#define ns2cyc(x) ((((x) * mul) + 65535) >> 16)
- setup = (HSMC_BF(NWE_SETUP, ns2cyc(config->nwe_setup))
- | HSMC_BF(NCS_WR_SETUP, ns2cyc(config->ncs_write_setup))
- | HSMC_BF(NRD_SETUP, ns2cyc(config->nrd_setup))
- | HSMC_BF(NCS_RD_SETUP, ns2cyc(config->ncs_read_setup)));
- pulse = (HSMC_BF(NWE_PULSE, ns2cyc(config->nwe_pulse))
- | HSMC_BF(NCS_WR_PULSE, ns2cyc(config->ncs_write_pulse))
- | HSMC_BF(NRD_PULSE, ns2cyc(config->nrd_pulse))
- | HSMC_BF(NCS_RD_PULSE, ns2cyc(config->ncs_read_pulse)));
- cycle = (HSMC_BF(NWE_CYCLE, ns2cyc(config->write_cycle))
- | HSMC_BF(NRD_CYCLE, ns2cyc(config->read_cycle)));
+ if (timing->ncs_read_setup > 0)
+ config->ncs_read_setup = ns2cyc(timing->ncs_read_setup);
+
+ if (timing->nrd_setup > 0)
+ config->nrd_setup = ns2cyc(timing->nrd_setup);
+
+ if (timing->ncs_write_setup > 0)
+ config->ncs_write_setup = ns2cyc(timing->ncs_write_setup);
+
+ if (timing->nwe_setup > 0)
+ config->nwe_setup = ns2cyc(timing->nwe_setup);
+
+ if (timing->ncs_read_pulse > 0)
+ config->ncs_read_pulse = ns2cyc(timing->ncs_read_pulse);
+
+ if (timing->nrd_pulse > 0)
+ config->nrd_pulse = ns2cyc(timing->nrd_pulse);
+
+ if (timing->ncs_write_pulse > 0)
+ config->ncs_write_pulse = ns2cyc(timing->ncs_write_pulse);
+
+ if (timing->nwe_pulse > 0)
+ config->nwe_pulse = ns2cyc(timing->nwe_pulse);
+
+ if (timing->read_cycle > 0)
+ config->read_cycle = ns2cyc(timing->read_cycle);
+
+ if (timing->write_cycle > 0)
+ config->write_cycle = ns2cyc(timing->write_cycle);
+
+ /* Extend read cycle in needed */
+ if (timing->ncs_read_recover > 0)
+ recover = ns2cyc(timing->ncs_read_recover);
+ else
+ recover = 1;
+
+ cycle = config->ncs_read_setup + config->ncs_read_pulse + recover;
+
+ if (config->read_cycle < cycle)
+ config->read_cycle = cycle;
+
+ /* Extend read cycle in needed */
+ if (timing->nrd_recover > 0)
+ recover = ns2cyc(timing->nrd_recover);
+ else
+ recover = 1;
+
+ cycle = config->nrd_setup + config->nrd_pulse + recover;
+
+ if (config->read_cycle < cycle)
+ config->read_cycle = cycle;
+
+ /* Extend write cycle in needed */
+ if (timing->ncs_write_recover > 0)
+ recover = ns2cyc(timing->ncs_write_recover);
+ else
+ recover = 1;
+
+ cycle = config->ncs_write_setup + config->ncs_write_pulse + recover;
+
+ if (config->write_cycle < cycle)
+ config->write_cycle = cycle;
+
+ /* Extend write cycle in needed */
+ if (timing->nwe_recover > 0)
+ recover = ns2cyc(timing->nwe_recover);
+ else
+ recover = 1;
+
+ cycle = config->nwe_setup + config->nwe_pulse + recover;
+
+ if (config->write_cycle < cycle)
+ config->write_cycle = cycle;
+}
+EXPORT_SYMBOL(smc_set_timing);
+
+int smc_set_configuration(int cs, const struct smc_config *config)
+{
+ unsigned long offset;
+ u32 setup, pulse, cycle, mode;
+
+ if (!hsmc)
+ return -ENODEV;
+ if (cs >= NR_CHIP_SELECTS)
+ return -EINVAL;
+
+ setup = (HSMC_BF(NWE_SETUP, config->nwe_setup)
+ | HSMC_BF(NCS_WR_SETUP, config->ncs_write_setup)
+ | HSMC_BF(NRD_SETUP, config->nrd_setup)
+ | HSMC_BF(NCS_RD_SETUP, config->ncs_read_setup));
+ pulse = (HSMC_BF(NWE_PULSE, config->nwe_pulse)
+ | HSMC_BF(NCS_WR_PULSE, config->ncs_write_pulse)
+ | HSMC_BF(NRD_PULSE, config->nrd_pulse)
+ | HSMC_BF(NCS_RD_PULSE, config->ncs_read_pulse));
+ cycle = (HSMC_BF(NWE_CYCLE, config->write_cycle)
+ | HSMC_BF(NRD_CYCLE, config->read_cycle));
switch (config->bus_width) {
case 1:
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 1eb99b814f5..d61a02da898 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -110,6 +110,10 @@ void __init at32_select_gpio(unsigned int pin, unsigned long flags)
pio_writel(pio, SODR, mask);
else
pio_writel(pio, CODR, mask);
+ if (flags & AT32_GPIOF_MULTIDRV)
+ pio_writel(pio, MDER, mask);
+ else
+ pio_writel(pio, MDDR, mask);
pio_writel(pio, PUDR, mask);
pio_writel(pio, OER, mask);
} else {
diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
index a1f8aced0a8..47efd0d1951 100644
--- a/arch/avr32/mach-at32ap/pm.h
+++ b/arch/avr32/mach-at32ap/pm.h
@@ -4,6 +4,14 @@
#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
#define __ARCH_AVR32_MACH_AT32AP_PM_H__
+/*
+ * We can reduce the code size a bit by using a constant here. Since
+ * this file is only used on AVR32 AP CPUs with segmentation enabled,
+ * it's safe to not use ioremap. Generic drivers should of course
+ * never do this.
+ */
+#define AT32_PM_BASE 0xfff00000
+
/* PM register offsets */
#define PM_MCCTRL 0x0000
#define PM_CKSEL 0x0004
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 82cf70854b9..480760bde63 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -224,19 +224,9 @@ void free_initmem(void)
#ifdef CONFIG_BLK_DEV_INITRD
-static int keep_initrd;
-
void free_initrd_mem(unsigned long start, unsigned long end)
{
- if (!keep_initrd)
- free_area(start, end, "initrd");
-}
-
-static int __init keepinitrd_setup(char *__unused)
-{
- keep_initrd = 1;
- return 1;
+ free_area(start, end, "initrd");
}
-__setup("keepinitrd", keepinitrd_setup);
#endif
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 017defaa525..b24f4535ffe 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -57,7 +57,7 @@ config GENERIC_TIME
bool
default n
-config GENERIC_CALIBRATE_DELAY
+config GENERIC_GPIO
bool
default y
@@ -323,7 +323,7 @@ config CMDLINE
to the kernel, you may specify one here. As a minimum, you should specify
the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
-comment "Board Setup"
+comment "Clock/PLL Setup"
config CLKIN_HZ
int "Crystal Frequency in Hz"
@@ -335,6 +335,118 @@ config CLKIN_HZ
help
The frequency of CLKIN crystal oscillator on the board in Hz.
+config BFIN_KERNEL_CLOCK
+ bool "Re-program Clocks while Kernel boots?"
+ default n
+ help
+ This option decides if kernel clocks are re-programed from the
+ bootloader settings. If the clocks are not set, the SDRAM settings
+ are also not changed, and the Bootloader does 100% of the hardware
+ configuration.
+
+config PLL_BYPASS
+ bool "Bypass PLL"
+ depends on BFIN_KERNEL_CLOCK
+ default n
+
+config CLKIN_HALF
+ bool "Half Clock In"
+ depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS)
+ default n
+ help
+ If this is set the clock will be divided by 2, before it goes to the PLL.
+
+config VCO_MULT
+ int "VCO Multiplier"
+ depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS)
+ range 1 64
+ default "22" if BFIN533_EZKIT
+ default "45" if BFIN533_STAMP
+ default "20" if BFIN537_STAMP
+ default "22" if BFIN533_BLUETECHNIX_CM
+ default "20" if BFIN537_BLUETECHNIX_CM
+ default "20" if BFIN561_BLUETECHNIX_CM
+ default "20" if BFIN561_EZKIT
+ help
+ This controls the frequency of the on-chip PLL. This can be between 1 and 64.
+ PLL Frequency = (Crystal Frequency) * (this setting)
+
+choice
+ prompt "Core Clock Divider"
+ depends on BFIN_KERNEL_CLOCK
+ default CCLK_DIV_1
+ help
+ This sets the frequency of the core. It can be 1, 2, 4 or 8
+ Core Frequency = (PLL frequency) / (this setting)
+
+config CCLK_DIV_1
+ bool "1"
+
+config CCLK_DIV_2
+ bool "2"
+
+config CCLK_DIV_4
+ bool "4"
+
+config CCLK_DIV_8
+ bool "8"
+endchoice
+
+config SCLK_DIV
+ int "System Clock Divider"
+ depends on BFIN_KERNEL_CLOCK
+ range 1 15
+ default 5 if BFIN533_EZKIT
+ default 5 if BFIN533_STAMP
+ default 4 if BFIN537_STAMP
+ default 5 if BFIN533_BLUETECHNIX_CM
+ default 4 if BFIN537_BLUETECHNIX_CM
+ default 4 if BFIN561_BLUETECHNIX_CM
+ default 5 if BFIN561_EZKIT
+ help
+ This sets the frequency of the system clock (including SDRAM or DDR).
+ This can be between 1 and 15
+ System Clock = (PLL frequency) / (this setting)
+
+#
+# Max & Min Speeds for various Chips
+#
+config MAX_VCO_HZ
+ int
+ default 600000000 if BF522
+ default 600000000 if BF525
+ default 600000000 if BF527
+ default 400000000 if BF531
+ default 400000000 if BF532
+ default 750000000 if BF533
+ default 500000000 if BF534
+ default 400000000 if BF536
+ default 600000000 if BF537
+ default 533000000 if BF538
+ default 533000000 if BF539
+ default 600000000 if BF542
+ default 533000000 if BF544
+ default 533000000 if BF549
+ default 600000000 if BF561
+
+config MIN_VCO_HZ
+ int
+ default 50000000
+
+config MAX_SCLK_HZ
+ int
+ default 133000000
+
+config MIN_SCLK_HZ
+ int
+ default 27000000
+
+comment "Kernel Timer/Scheduler"
+
+source kernel/Kconfig.hz
+
+comment "Memory Setup"
+
config MEM_SIZE
int "SDRAM Memory Size in MBytes"
default 32 if BFIN533_EZKIT
@@ -364,15 +476,16 @@ config ENET_FLASH_PIN
config BOOT_LOAD
hex "Kernel load address for booting"
default "0x1000"
+ range 0x1000 0x20000000
help
This option allows you to set the load address of the kernel.
This can be useful if you are on a board which has a small amount
of memory or you wish to reserve some memory at the beginning of
the address space.
- Note that you generally want to keep this value at or above 4k
- (0x1000) as this will allow the kernel to capture NULL pointer
- references.
+ Note that you need to keep this value above 4k (0x1000) as this
+ memory region is used to capture NULL pointer references as well
+ as some core kernel functions.
comment "LED Status Indicators"
depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
@@ -408,6 +521,52 @@ config BFIN_IDLE_LED_NUM
help
Select the LED (marked on the board) for you to blink.
+choice
+ prompt "Blackfin Exception Scratch Register"
+ default BFIN_SCRATCH_REG_RETN
+ help
+ Select the resource to reserve for the Exception handler:
+ - RETN: Non-Maskable Interrupt (NMI)
+ - RETE: Exception Return (JTAG/ICE)
+ - CYCLES: Performance counter
+
+ If you are unsure, please select "RETN".
+
+config BFIN_SCRATCH_REG_RETN
+ bool "RETN"
+ help
+ Use the RETN register in the Blackfin exception handler
+ as a stack scratch register. This means you cannot
+ safely use NMI on the Blackfin while running Linux, but
+ you can debug the system with a JTAG ICE and use the
+ CYCLES performance registers.
+
+ If you are unsure, please select "RETN".
+
+config BFIN_SCRATCH_REG_RETE
+ bool "RETE"
+ help
+ Use the RETE register in the Blackfin exception handler
+ as a stack scratch register. This means you cannot
+ safely use a JTAG ICE while debugging a Blackfin board,
+ but you can safely use the CYCLES performance registers
+ and the NMI.
+
+ If you are unsure, please select "RETN".
+
+config BFIN_SCRATCH_REG_CYCLES
+ bool "CYCLES"
+ help
+ Use the CYCLES register in the Blackfin exception handler
+ as a stack scratch register. This means you cannot
+ safely use the CYCLES performance registers on a Blackfin
+ board at anytime, but you can debug the system with a JTAG
+ ICE and use the NMI.
+
+ If you are unsure, please select "RETN".
+
+endchoice
+
#
# Sorry - but you need to put the hex address here -
#
@@ -448,10 +607,6 @@ endmenu
menu "Blackfin Kernel Optimizations"
-comment "Timer Tick"
-
-source kernel/Kconfig.hz
-
comment "Memory Optimizations"
config I_ENTRY_L1
@@ -614,22 +769,22 @@ endchoice
comment "Cache Support"
-config BLKFIN_CACHE
+config BFIN_ICACHE
bool "Enable ICACHE"
-config BLKFIN_DCACHE
+config BFIN_DCACHE
bool "Enable DCACHE"
-config BLKFIN_DCACHE_BANKA
+config BFIN_DCACHE_BANKA
bool "Enable only 16k BankA DCACHE - BankB is SRAM"
- depends on BLKFIN_DCACHE && !BF531
+ depends on BFIN_DCACHE && !BF531
default n
-config BLKFIN_CACHE_LOCK
- bool "Enable Cache Locking"
+config BFIN_ICACHE_LOCK
+ bool "Enable Instruction Cache Locking"
choice
prompt "Policy"
- depends on BLKFIN_DCACHE
- default BLKFIN_WB
-config BLKFIN_WB
+ depends on BFIN_DCACHE
+ default BFIN_WB
+config BFIN_WB
bool "Write back"
help
Write Back Policy:
@@ -646,7 +801,7 @@ config BLKFIN_WB
If you are unsure of the options and you want to be safe,
then go with Write Through.
-config BLKFIN_WT
+config BFIN_WT
bool "Write through"
help
Write Back Policy:
@@ -672,66 +827,9 @@ config L1_MAX_PIECE
Set the max memory pieces for the L1 SRAM allocation algorithm.
Min value is 16. Max value is 1024.
-menu "Clock Settings"
-
-
-config BFIN_KERNEL_CLOCK
- bool "Re-program Clocks while Kernel boots?"
- default n
- help
- This option decides if kernel clocks are re-programed from the
- bootloader settings. If the clocks are not set, the SDRAM settings
- are also not changed, and the Bootloader does 100% of the hardware
- configuration.
-
-config VCO_MULT
- int "VCO Multiplier"
- depends on BFIN_KERNEL_CLOCK
- default "22" if BFIN533_EZKIT
- default "45" if BFIN533_STAMP
- default "20" if BFIN537_STAMP
- default "22" if BFIN533_BLUETECHNIX_CM
- default "20" if BFIN537_BLUETECHNIX_CM
- default "20" if BFIN561_BLUETECHNIX_CM
- default "20" if BFIN561_EZKIT
-
-config CCLK_DIV
- int "Core Clock Divider"
- depends on BFIN_KERNEL_CLOCK
- default 1 if BFIN533_EZKIT
- default 1 if BFIN533_STAMP
- default 1 if BFIN537_STAMP
- default 1 if BFIN533_BLUETECHNIX_CM
- default 1 if BFIN537_BLUETECHNIX_CM
- default 1 if BFIN561_BLUETECHNIX_CM
- default 1 if BFIN561_EZKIT
-
-config SCLK_DIV
- int "System Clock Divider"
- depends on BFIN_KERNEL_CLOCK
- default 5 if BFIN533_EZKIT
- default 5 if BFIN533_STAMP
- default 4 if BFIN537_STAMP
- default 5 if BFIN533_BLUETECHNIX_CM
- default 4 if BFIN537_BLUETECHNIX_CM
- default 4 if BFIN561_BLUETECHNIX_CM
- default 5 if BFIN561_EZKIT
-
-config CLKIN_HALF
- bool "Half ClockIn"
- depends on BFIN_KERNEL_CLOCK
- default n
-
-config PLL_BYPASS
- bool "Bypass PLL"
- depends on BFIN_KERNEL_CLOCK
- default n
-
-endmenu
-
comment "Asynchonous Memory Configuration"
-menu "EBIU_AMBCTL Global Control"
+menu "EBIU_AMGCTL Global Control"
config C_AMCKEN
bool "Enable CLKOUT"
default y
@@ -941,24 +1039,6 @@ config DEBUG_ICACHE_CHECK
also relocates the irq_panic() function to L1 memory, (which is
un-cached).
-config DEBUG_KERNEL_START
- bool "Debug Kernel Startup"
- depends on DEBUG_KERNEL
- help
- Say Y here to put in an mini-execption handler before the kernel
- replaces the bootloader exception handler. This will stop kernels
- from dieing at startup with no visible error messages.
-
-config DEBUG_SERIAL_EARLY_INIT
- bool "Initialize serial driver early"
- default n
- depends on SERIAL_BFIN
- help
- Say Y here if you want to get kernel output early when kernel
- crashes before the normal console initialization. If this option
- is enable, console output will always go to the ttyBF0, no matter
- what kernel boot paramters you set.
-
config DEBUG_HUNT_FOR_ZERO
bool "Catch NULL pointer reads/writes"
default y
@@ -973,8 +1053,89 @@ config DEBUG_HUNT_FOR_ZERO
Enabling this option will take up an extra entry in CPLB table.
Otherwise, there is no extra overhead.
+config DEBUG_BFIN_HWTRACE_ON
+ bool "Turn on Blackfin's Hardware Trace"
+ default y
+ help
+ All Blackfins include a Trace Unit which stores a history of the last
+ 16 changes in program flow taken by the program sequencer. The history
+ allows the user to recreate the program sequencer’s recent path. This
+ can be handy when an application dies - we print out the execution
+ path of how it got to the offending instruction.
+
+ By turning this off, you may save a tiny amount of power.
+
+choice
+ prompt "Omit loop Tracing"
+ default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ depends on DEBUG_BFIN_HWTRACE_ON
+ help
+ The trace buffer can be configured to omit recording of changes in
+ program flow that match either the last entry or one of the last
+ two entries. Omitting one of these entries from the record prevents
+ the trace buffer from overflowing because of any sort of loop (for, do
+ while, etc) in the program.
+
+ Because zero-overhead Hardware loops are not recorded in the trace buffer,
+ this feature can be used to prevent trace overflow from loops that
+ are nested four deep.
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ bool "Trace all Loops"
+ help
+ The trace buffer records all changes of flow
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
+ bool "Compress single-level loops"
+ help
+ The trace buffer does not record single loops - helpful if trace
+ is spinning on a while or do loop.
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
+ bool "Compress two-level loops"
+ help
+ The trace buffer does not record loops two levels deep. Helpful if
+ the trace is spinning in a nested loop
+
+endchoice
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION
+ int
+ depends on DEBUG_BFIN_HWTRACE_ON
+ default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
+ default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
+
+
+config DEBUG_BFIN_HWTRACE_EXPAND
+ bool "Expand Trace Buffer greater than 16 entries"
+ depends on DEBUG_BFIN_HWTRACE_ON
+ default n
+ help
+ By selecting this option, every time the 16 hardware entries in
+ the Blackfin's HW Trace buffer are full, the kernel will move them
+ into a software buffer, for dumping when there is an issue. This
+ has a great impact on performance, (an interrupt every 16 change of
+ flows) and should normally be turned off, except in those nasty
+ debugging sessions
+
+config DEBUG_BFIN_HWTRACE_EXPAND_LEN
+ int "Size of Trace buffer (in power of 2k)"
+ range 0 4
+ depends on DEBUG_BFIN_HWTRACE_EXPAND
+ default 1
+ help
+ This sets the size of the software buffer that the trace information
+ is kept in.
+ 0 for (2^0) 1k, or 256 entries,
+ 1 for (2^1) 2k, or 512 entries,
+ 2 for (2^2) 4k, or 1024 entries,
+ 3 for (2^3) 8k, or 2048 entries,
+ 4 for (2^4) 16k, or 4096 entries
+
config DEBUG_BFIN_NO_KERN_HWTRACE
bool "Trace user apps (turn off hwtrace in kernel)"
+ depends on DEBUG_BFIN_HWTRACE_ON
default n
help
Some pieces of the kernel contain a lot of flow changes which can
@@ -985,6 +1146,20 @@ config DEBUG_BFIN_NO_KERN_HWTRACE
Say Y here to disable hardware tracing in some known "jumpy" pieces
of code so that the trace buffer will extend further back.
+config EARLY_PRINTK
+ bool "Early printk"
+ default n
+ help
+ This option enables special console drivers which allow the kernel
+ to print messages very early in the bootup process.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. After enabling this
+ feature, you must add "earlyprintk=serial,uart0,57600" to the
+ command line (bootargs). It is safe to say Y here in all cases, as
+ all of this lives in the init section and is thrown away after the
+ kernel boots completely.
+
config DUAL_CORE_TEST_MODULE
tristate "Dual Core Test Module"
depends on (BF561)
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 1cf1ab28dc6..57f58d5cd47 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.5
+# Linux kernel version: 2.6.22.6
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -58,15 +61,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-CONFIG_BUDDY=y
# CONFIG_NP2 is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -184,19 +192,17 @@ CONFIG_WDTIMER=13
# CONFIG_CMDLINE_BOOL is not set
#
-# Board Setup
+# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=27000000
-CONFIG_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Blackfin Kernel Optimizations
-#
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=750000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
#
-# Timer Tick
+# Kernel Timer/Scheduler
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
@@ -205,6 +211,20 @@ CONFIG_HZ_250=y
CONFIG_HZ=250
#
+# Memory Setup
+#
+CONFIG_MEM_SIZE=32
+CONFIG_MEM_ADD_WIDTH=9
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
# Memory Optimizations
#
CONFIG_I_ENTRY_L1=y
@@ -243,20 +263,15 @@ CONFIG_DMA_UNCACHED_1M=y
#
# Cache Support
#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-# CONFIG_BLKFIN_WB is not set
-CONFIG_BLKFIN_WT=y
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
CONFIG_L1_MAX_PIECE=16
#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
-#
# Asynchonous Memory Configuration
#
@@ -277,12 +292,13 @@ CONFIG_C_AMBEN_ALL=y
CONFIG_BANK_0=0x7BB0
CONFIG_BANK_1=0x7BB0
CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0xAAC3
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -290,10 +306,6 @@ CONFIG_BANK_3=0x99B3
# CONFIG_PCCARD is not set
#
-# PCI Hotplug Support
-#
-
-#
# Executable file formats
#
CONFIG_BINFMT_ELF_FDPIC=y
@@ -327,7 +339,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -368,20 +379,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -448,7 +447,16 @@ CONFIG_IRTTY_SIR=m
# FIR device drivers
#
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -466,10 +474,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
@@ -513,7 +517,6 @@ CONFIG_MTD_MW320D=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -550,16 +553,13 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -587,10 +587,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
@@ -599,10 +595,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -611,19 +603,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_MD is not set
#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
# Network device support
#
CONFIG_NETDEVICES=y
@@ -631,10 +610,6 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -644,27 +619,15 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -688,6 +651,7 @@ CONFIG_SMC91X=y
#
CONFIG_INPUT=m
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -704,6 +668,7 @@ CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -718,7 +683,7 @@ CONFIG_INPUT_EVDEV=m
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BFIN_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BF5xx_TIMERS is not set
# CONFIG_BF5xx_PPI is not set
@@ -758,10 +723,6 @@ CONFIG_UNIX98_PTYS=y
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -773,7 +734,6 @@ CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
CONFIG_BLACKFIN_DPMC=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -781,10 +741,6 @@ CONFIG_BLACKFIN_DPMC=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
#
@@ -803,22 +759,22 @@ CONFIG_SPI_BFIN=y
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -830,16 +786,19 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
@@ -862,18 +821,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# USB Gadget Support
#
-# CONFIG_SPI_MMC is not set
+# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
@@ -913,17 +871,29 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
#
-# RTC drivers
+# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
CONFIG_RTC_DRV_BFIN=y
#
@@ -940,14 +910,6 @@ CONFIG_RTC_DRV_BFIN=y
#
#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
# PBX support
#
# CONFIG_PBX is not set
@@ -1047,6 +1009,7 @@ CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1124,14 +1087,20 @@ CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
@@ -1154,6 +1123,7 @@ CONFIG_SECURITY_CAPABILITIES=m
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
@@ -1161,3 +1131,4 @@ CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 64b7f1b3b2a..306302baff0 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.5
+# Linux kernel version: 2.6.22.6
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -58,15 +61,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-CONFIG_BUDDY=y
# CONFIG_NP2 is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -185,9 +193,27 @@ CONFIG_WDTIMER=13
# CONFIG_CMDLINE_BOOL is not set
#
-# Board Setup
+# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=11059200
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=750000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+
+#
+# Memory Setup
+#
CONFIG_MEM_SIZE=128
CONFIG_MEM_ADD_WIDTH=11
CONFIG_ENET_FLASH_PIN=0
@@ -198,6 +224,9 @@ CONFIG_BOOT_LOAD=0x1000
#
# CONFIG_BFIN_ALIVE_LED is not set
# CONFIG_BFIN_IDLE_LED is not set
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
CONFIG_BFIN_ALIVE_LED_PORT=0xFFC00700
CONFIG_BFIN_ALIVE_LED_DPORT=0xFFC00730
CONFIG_BFIN_IDLE_LED_PORT=0xFFC00700
@@ -208,15 +237,6 @@ CONFIG_BFIN_IDLE_LED_DPORT=0xFFC00730
#
#
-# Timer Tick
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-
-#
# Memory Optimizations
#
CONFIG_I_ENTRY_L1=y
@@ -255,20 +275,15 @@ CONFIG_DMA_UNCACHED_1M=y
#
# Cache Support
#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-# CONFIG_BLKFIN_WB is not set
-CONFIG_BLKFIN_WT=y
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
CONFIG_L1_MAX_PIECE=16
#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
-#
# Asynchonous Memory Configuration
#
@@ -289,12 +304,13 @@ CONFIG_C_AMBEN_ALL=y
CONFIG_BANK_0=0x7BB0
CONFIG_BANK_1=0x7BB0
CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0xAAC3
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -302,10 +318,6 @@ CONFIG_BANK_3=0x99B3
# CONFIG_PCCARD is not set
#
-# PCI Hotplug Support
-#
-
-#
# Executable file formats
#
CONFIG_BINFMT_ELF_FDPIC=y
@@ -339,7 +351,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -380,20 +391,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -460,7 +459,16 @@ CONFIG_IRTTY_SIR=m
# FIR device drivers
#
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -478,10 +486,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
@@ -525,7 +529,6 @@ CONFIG_MTD_MW320D=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -562,16 +565,13 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -599,10 +599,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
@@ -611,10 +607,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -623,19 +615,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_MD is not set
#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
# Network device support
#
CONFIG_NETDEVICES=y
@@ -643,10 +622,6 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -656,27 +631,15 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -700,6 +663,7 @@ CONFIG_SMC91X=y
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -716,8 +680,14 @@ CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_BF53X_PFBUTTONS is not set
CONFIG_TWI_KEYPAD=m
@@ -734,7 +704,7 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BFIN_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BF5xx_TIMERS is not set
# CONFIG_BF5xx_PPI is not set
@@ -777,10 +747,6 @@ CONFIG_UNIX98_PTYS=y
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -792,7 +758,6 @@ CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
CONFIG_BLACKFIN_DPMC=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -800,11 +765,8 @@ CONFIG_BLACKFIN_DPMC=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
@@ -818,10 +780,11 @@ CONFIG_I2C_ALGOBIT=m
# I2C Hardware Bus support
#
# CONFIG_I2C_BLACKFIN_GPIO is not set
+# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
@@ -857,18 +820,16 @@ CONFIG_SPI_BFIN=y
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -896,6 +857,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -920,22 +882,30 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -957,10 +927,6 @@ CONFIG_ADV7393_1XMEM=y
# CONFIG_ADV7393_2XMEM is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
# CONFIG_LOGO is not set
#
@@ -1001,7 +967,6 @@ CONFIG_SND_BLACKFIN_AD1836_TDM=y
# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
CONFIG_SND_BLACKFIN_AD1836_MULSUB=y
# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
-CONFIG_SND_BLACKFIN_AD1981B=m
CONFIG_SND_BLACKFIN_SPORT=0
CONFIG_SND_BLACKFIN_SPI_PFBIT=4
CONFIG_SND_BFIN_AD73311=m
@@ -1009,11 +974,16 @@ CONFIG_SND_BFIN_SPORT=0
CONFIG_SND_BFIN_AD73311_SE=4
#
-# SoC audio support
+# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
+# SoC Audio for the ADI Blackfin
+#
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
@@ -1033,18 +1003,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# USB Gadget Support
#
-# CONFIG_SPI_MMC is not set
+# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
@@ -1084,44 +1053,50 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
#
-# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_BFIN=y
#
-# DMA Engine support
+# Platform RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Clients
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_BFIN=y
#
-# DMA Devices
+# DMA Engine support
#
+# CONFIG_DMA_ENGINE is not set
#
-# Auxiliary Display support
+# DMA Clients
#
#
-# Virtualization
+# DMA Devices
#
#
@@ -1224,6 +1199,7 @@ CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1301,14 +1277,20 @@ CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
@@ -1331,6 +1313,7 @@ CONFIG_SECURITY_CAPABILITIES=m
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
@@ -1338,3 +1321,4 @@ CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index ccf09dc09a1..828b604438e 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.5
+# Linux kernel version: 2.6.22.6
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -58,15 +61,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-CONFIG_BUDDY=y
# CONFIG_NP2 is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -148,13 +156,6 @@ CONFIG_IRQ_PLL_WAKEUP=7
#
#
-# PORT F/G Selection
-#
-CONFIG_BF537_PORT_F=y
-# CONFIG_BF537_PORT_G is not set
-# CONFIG_BF537_PORT_H is not set
-
-#
# Interrupt Priority Assignment
#
@@ -199,19 +200,17 @@ CONFIG_IRQ_WATCH=13
# CONFIG_CMDLINE_BOOL is not set
#
-# Board Setup
+# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=25000000
-CONFIG_MEM_SIZE=64
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Blackfin Kernel Optimizations
-#
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
#
-# Timer Tick
+# Kernel Timer/Scheduler
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
@@ -220,6 +219,20 @@ CONFIG_HZ_250=y
CONFIG_HZ=250
#
+# Memory Setup
+#
+CONFIG_MEM_SIZE=64
+CONFIG_MEM_ADD_WIDTH=10
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
# Memory Optimizations
#
CONFIG_I_ENTRY_L1=y
@@ -258,20 +271,15 @@ CONFIG_DMA_UNCACHED_1M=y
#
# Cache Support
#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-# CONFIG_BLKFIN_WB is not set
-CONFIG_BLKFIN_WT=y
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
CONFIG_L1_MAX_PIECE=16
#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
-#
# Asynchonous Memory Configuration
#
@@ -298,6 +306,7 @@ CONFIG_BANK_3=0x99B3
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -305,10 +314,6 @@ CONFIG_BANK_3=0x99B3
# CONFIG_PCCARD is not set
#
-# PCI Hotplug Support
-#
-
-#
# Executable file formats
#
CONFIG_BINFMT_ELF_FDPIC=y
@@ -342,7 +347,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -383,20 +387,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -463,7 +455,16 @@ CONFIG_IRTTY_SIR=m
# FIR device drivers
#
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -481,10 +482,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
@@ -528,7 +525,6 @@ CONFIG_MTD_MW320D=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -565,13 +561,10 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_BFIN=m
CONFIG_BFIN_NAND_BASE=0x20212000
CONFIG_BFIN_NAND_CLE=2
@@ -580,11 +573,13 @@ CONFIG_BFIN_NAND_READY=3
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -612,10 +607,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
@@ -624,10 +615,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -636,19 +623,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_MD is not set
#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
# Network device support
#
CONFIG_NETDEVICES=y
@@ -656,11 +630,20 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
#
-# PHY device support
+# MII PHY device drivers
#
-# CONFIG_PHYLIB is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
@@ -674,27 +657,15 @@ CONFIG_BFIN_TX_DESC_NUM=10
CONFIG_BFIN_RX_DESC_NUM=20
# CONFIG_BFIN_MAC_RMII is not set
# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -718,6 +689,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -734,8 +706,14 @@ CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_BF53X_PFBUTTONS is not set
CONFIG_TWI_KEYPAD=m
@@ -752,7 +730,7 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BFIN_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BF5xx_TIMERS is not set
# CONFIG_BF5xx_PPI is not set
@@ -803,10 +781,6 @@ CONFIG_CAN_BLACKFIN=m
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -818,7 +792,6 @@ CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
CONFIG_BLACKFIN_DPMC=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -826,11 +799,8 @@ CONFIG_BLACKFIN_DPMC=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
@@ -846,10 +816,11 @@ CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_BLACKFIN_GPIO is not set
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
@@ -885,18 +856,16 @@ CONFIG_SPI_BFIN=y
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -924,6 +893,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -948,11 +918,8 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
# Graphics support
@@ -960,12 +927,23 @@ CONFIG_HWMON=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_LCD_CLASS_DEVICE=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -991,10 +969,6 @@ CONFIG_LQ035_SLAVE_ADDR=0x58
# CONFIG_FB_BFIN_BGR is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
# CONFIG_LOGO is not set
#
@@ -1035,7 +1009,6 @@ CONFIG_SND_BLACKFIN_AD1836_TDM=y
# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
CONFIG_SND_BLACKFIN_AD1836_MULSUB=y
# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
-CONFIG_SND_BLACKFIN_AD1981B=m
CONFIG_SND_BLACKFIN_SPORT=0
CONFIG_SND_BLACKFIN_SPI_PFBIT=4
CONFIG_SND_BFIN_AD73311=m
@@ -1043,11 +1016,16 @@ CONFIG_SND_BFIN_SPORT=0
CONFIG_SND_BFIN_AD73311_SE=4
#
-# SoC audio support
+# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
+# SoC Audio for the ADI Blackfin
+#
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
@@ -1067,18 +1045,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# USB Gadget Support
#
-# CONFIG_SPI_MMC is not set
+# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
@@ -1118,44 +1095,50 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
#
-# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_BFIN=y
#
-# DMA Engine support
+# Platform RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Clients
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_BFIN=y
#
-# DMA Devices
+# DMA Engine support
#
+# CONFIG_DMA_ENGINE is not set
#
-# Auxiliary Display support
+# DMA Clients
#
#
-# Virtualization
+# DMA Devices
#
#
@@ -1258,6 +1241,7 @@ CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1335,14 +1319,20 @@ CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
@@ -1365,6 +1355,7 @@ CONFIG_SECURITY_CAPABILITIES=m
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
@@ -1372,3 +1363,4 @@ CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index ac8390fafa9..e80f3d59c28 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.5
+# Linux kernel version: 2.6.22.6
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -51,7 +54,6 @@ CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -59,14 +61,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
# CONFIG_NP2 is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -165,6 +173,7 @@ CONFIG_IRQ_UART1_TX=10
#
# BF548 Specific Configuration
#
+# CONFIG_DEB_DMA_URGENT is not set
#
# Interrupt Priority Assignment
@@ -242,24 +251,35 @@ CONFIG_IRQ_PINT2=11
CONFIG_IRQ_PINT3=11
#
-# Board customizations
+# Pin Interrupt to Port Assignment
#
-# CONFIG_CMDLINE_BOOL is not set
#
-# Board Setup
+# Assignment
#
-CONFIG_CLKIN_HZ=25000000
-CONFIG_MEM_SIZE=64
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
+CONFIG_PINTx_REASSIGN=y
+CONFIG_PINT0_ASSIGN=0x00000101
+CONFIG_PINT1_ASSIGN=0x01010000
+CONFIG_PINT2_ASSIGN=0x07000101
+CONFIG_PINT3_ASSIGN=0x02020303
#
-# Blackfin Kernel Optimizations
+# Board customizations
#
+# CONFIG_CMDLINE_BOOL is not set
#
-# Timer Tick
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=533000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
@@ -268,6 +288,20 @@ CONFIG_HZ_250=y
CONFIG_HZ=250
#
+# Memory Setup
+#
+CONFIG_MEM_SIZE=64
+CONFIG_MEM_ADD_WIDTH=10
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
# Memory Optimizations
#
CONFIG_I_ENTRY_L1=y
@@ -275,12 +309,12 @@ CONFIG_EXCPT_IRQ_SYSC_L1=y
CONFIG_DO_IRQ_L1=y
CONFIG_CORE_TIMER_IRQ_L1=y
CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
CONFIG_ARITHMETIC_OPS_L1=y
CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
# CONFIG_IP_CHECKSUM_L1 is not set
CONFIG_CACHELINE_ALIGNED_L1=y
# CONFIG_SYSCALL_TAB_L1 is not set
@@ -306,20 +340,15 @@ CONFIG_DMA_UNCACHED_1M=y
#
# Cache Support
#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-# CONFIG_BLKFIN_WB is not set
-CONFIG_BLKFIN_WT=y
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
CONFIG_L1_MAX_PIECE=16
#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
-#
# Asynchonous Memory Configuration
#
@@ -327,7 +356,6 @@ CONFIG_L1_MAX_PIECE=16
# EBIU_AMBCTL Global Control
#
CONFIG_C_AMCKEN=y
-CONFIG_C_CDPRIO=y
# CONFIG_C_AMBEN is not set
# CONFIG_C_AMBEN_B0 is not set
# CONFIG_C_AMBEN_B0_B1 is not set
@@ -338,7 +366,7 @@ CONFIG_C_AMBEN_ALL=y
# EBIU_AMBCTL Control
#
CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_1=0x5554
CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0x99B3
@@ -346,6 +374,7 @@ CONFIG_BANK_3=0x99B3
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -353,10 +382,6 @@ CONFIG_BANK_3=0x99B3
# CONFIG_PCCARD is not set
#
-# PCI Hotplug Support
-#
-
-#
# Executable file formats
#
CONFIG_BINFMT_ELF_FDPIC=y
@@ -383,7 +408,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -424,20 +448,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -463,7 +475,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -475,29 +496,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
#
# User Modules And Translation Layers
#
-# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
@@ -509,8 +524,10 @@ CONFIG_MTD_BLOCK=y
#
# RAM/ROM/Flash chip drivers
#
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -521,22 +538,32 @@ CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_MW320D is not set
+CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x20000000
+CONFIG_MTD_PHYSMAP_LEN=0x400000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_BF5xx is not set
-CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -548,16 +575,23 @@ CONFIG_MTD_UCLINUX=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_BFIN is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_BF5XX=y
+CONFIG_MTD_NAND_BF5XX_HWECC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -585,41 +619,61 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
+# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_ATA is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
-# Multi-device support (RAID and LVM)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_MD is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# Fusion MPT device support
+# SCSI Transports
#
-# CONFIG_FUSION is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
-# IEEE 1394 (FireWire) support
+# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_PATA_PLATFORM is not set
+CONFIG_PATA_BF54X=y
+CONFIG_PATA_BF54X_DMA=y
#
-# I2O device support
+# Multi-device support (RAID and LVM)
#
+# CONFIG_MD is not set
#
# Network device support
@@ -629,10 +683,6 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -641,28 +691,16 @@ CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_SMSC911X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -686,6 +724,7 @@ CONFIG_MII=y
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -702,10 +741,17 @@ CONFIG_INPUT=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_BF53X_PFBUTTONS is not set
+# CONFIG_TWI_KEYPAD is not set
#
# Hardware I/O ports
@@ -718,12 +764,15 @@ CONFIG_INPUT_MISC=y
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BFIN_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BF5xx_TIMERS is not set
# CONFIG_BF5xx_PPI is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+# CONFIG_AD5304 is not set
+# CONFIG_BF5xx_TEA5764 is not set
# CONFIG_BF5xx_FBDMA is not set
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
@@ -760,14 +809,9 @@ CONFIG_UNIX98_PTYS=y
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -775,32 +819,114 @@ CONFIG_HW_RANDOM=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
#
-# I2C support
+# I2C Hardware Bus support
#
-# CONFIG_I2C is not set
+# CONFIG_I2C_BLACKFIN_GPIO is not set
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8575 is not set
+# CONFIG_SENSORS_PCA9543 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
#
-# Dallas's 1-wire bus
+# SPI Master Controller Drivers
#
-# CONFIG_W1 is not set
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
#
-# Hardware Monitoring support
+# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -812,16 +938,19 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
@@ -844,6 +973,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
@@ -851,11 +984,20 @@ CONFIG_USB_ARCH_HAS_HCD=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=m
#
-# MMC/SD Card support
+# MMC/SD Host Controller Drivers
#
-# CONFIG_MMC is not set
+CONFIG_SDH_BFIN=m
+# CONFIG_SPI_MMC is not set
#
# LED devices
@@ -894,15 +1036,37 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
CONFIG_RTC_DRV_BFIN=y
#
@@ -919,14 +1083,6 @@ CONFIG_RTC_DRV_BFIN=y
#
#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
# PBX support
#
# CONFIG_PBX is not set
@@ -991,8 +1147,25 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -1040,36 +1213,20 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_HWERR=y
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-# CONFIG_DEBUG_KERNEL_START is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
@@ -1092,9 +1249,12 @@ CONFIG_SECURITY_CAPABILITIES=y
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 51c0b6f9779..85e647f8775 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.5
+# Linux kernel version: 2.6.22.6
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -58,15 +61,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-CONFIG_BUDDY=y
# CONFIG_NP2 is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -229,19 +237,17 @@ CONFIG_IRQ_WDTIMER=13
# CONFIG_CMDLINE_BOOL is not set
#
-# Board Setup
+# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=30000000
-CONFIG_MEM_SIZE=64
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Blackfin Kernel Optimizations
-#
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
#
-# Timer Tick
+# Kernel Timer/Scheduler
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
@@ -250,6 +256,20 @@ CONFIG_HZ_250=y
CONFIG_HZ=250
#
+# Memory Setup
+#
+CONFIG_MEM_SIZE=64
+CONFIG_MEM_ADD_WIDTH=9
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
# Memory Optimizations
#
CONFIG_I_ENTRY_L1=y
@@ -288,20 +308,15 @@ CONFIG_DMA_UNCACHED_1M=y
#
# Cache Support
#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-# CONFIG_BLKFIN_WB is not set
-CONFIG_BLKFIN_WT=y
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
CONFIG_L1_MAX_PIECE=16
#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
-#
# Asynchonous Memory Configuration
#
@@ -326,12 +341,13 @@ CONFIG_C_AMBEN_ALL=y
CONFIG_BANK_0=0x7BB0
CONFIG_BANK_1=0x7BB0
CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0xAAC3
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -339,10 +355,6 @@ CONFIG_BANK_3=0x99B3
# CONFIG_PCCARD is not set
#
-# PCI Hotplug Support
-#
-
-#
# Executable file formats
#
CONFIG_BINFMT_ELF_FDPIC=y
@@ -364,7 +376,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -405,20 +416,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -485,7 +484,16 @@ CONFIG_IRTTY_SIR=m
# FIR device drivers
#
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -503,10 +511,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
@@ -550,7 +554,6 @@ CONFIG_MTD_MW320D=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -588,16 +591,13 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -625,10 +625,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
@@ -637,10 +633,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -649,19 +641,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_MD is not set
#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
# Network device support
#
CONFIG_NETDEVICES=y
@@ -669,10 +648,6 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -682,27 +657,15 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -726,6 +689,7 @@ CONFIG_SMC91X=y
#
CONFIG_INPUT=m
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -742,6 +706,7 @@ CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -756,7 +721,7 @@ CONFIG_INPUT_EVDEV=m
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BFIN_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BF5xx_TIMERS is not set
# CONFIG_BF5xx_PPI is not set
@@ -796,10 +761,6 @@ CONFIG_UNIX98_PTYS=y
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -810,7 +771,6 @@ CONFIG_WATCHDOG=y
CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -818,10 +778,6 @@ CONFIG_HW_RANDOM=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
#
@@ -840,22 +796,22 @@ CONFIG_SPI_BFIN=y
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -867,16 +823,19 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
@@ -899,18 +858,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# USB Gadget Support
#
-# CONFIG_SPI_MMC is not set
+# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
@@ -953,14 +911,6 @@ CONFIG_USB_ARCH_HAS_HCD=y
#
#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
# PBX support
#
# CONFIG_PBX is not set
@@ -1060,6 +1010,7 @@ CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1137,14 +1088,20 @@ CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
# CONFIG_DUAL_CORE_TEST_MODULE is not set
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
@@ -1168,6 +1125,7 @@ CONFIG_SECURITY_CAPABILITIES=m
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
@@ -1175,3 +1133,4 @@ CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 983ed181c89..15e36aaf218 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.5
+# Linux kernel version: 2.6.22.6
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -41,6 +42,7 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -57,15 +59,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=9
-CONFIG_BUDDY=y
# CONFIG_NP2 is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -147,13 +154,6 @@ CONFIG_IRQ_PLL_WAKEUP=7
#
#
-# PORT F/G Selection
-#
-CONFIG_BF537_PORT_F=y
-# CONFIG_BF537_PORT_G is not set
-# CONFIG_BF537_PORT_H is not set
-
-#
# Interrupt Priority Assignment
#
@@ -198,19 +198,17 @@ CONFIG_IRQ_WATCH=13
# CONFIG_CMDLINE_BOOL is not set
#
-# Board Setup
+# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=24576000
-CONFIG_MEM_SIZE=64
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Blackfin Kernel Optimizations
-#
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
#
-# Timer Tick
+# Kernel Timer/Scheduler
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
@@ -219,6 +217,20 @@ CONFIG_HZ_250=y
CONFIG_HZ=250
#
+# Memory Setup
+#
+CONFIG_MEM_SIZE=64
+CONFIG_MEM_ADD_WIDTH=10
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
# Memory Optimizations
#
CONFIG_I_ENTRY_L1=y
@@ -257,20 +269,15 @@ CONFIG_DMA_UNCACHED_1M=y
#
# Cache Support
#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-CONFIG_BLKFIN_WB=y
-# CONFIG_BLKFIN_WT is not set
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
-#
# Asynchonous Memory Configuration
#
@@ -297,6 +304,7 @@ CONFIG_BANK_3=0x99B3
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -304,10 +312,6 @@ CONFIG_BANK_3=0x99B3
# CONFIG_PCCARD is not set
#
-# PCI Hotplug Support
-#
-
-#
# Executable file formats
#
CONFIG_BINFMT_ELF_FDPIC=y
@@ -334,7 +338,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -375,20 +378,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -414,7 +405,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -432,10 +432,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
@@ -473,7 +469,6 @@ CONFIG_MTD_CFI_I2=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -499,13 +494,10 @@ CONFIG_MTD_UCLINUX=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_BFIN=y
CONFIG_BFIN_NAND_BASE=0x20100000
CONFIG_BFIN_NAND_CLE=2
@@ -514,11 +506,13 @@ CONFIG_BFIN_NAND_READY=44
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -546,10 +540,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
@@ -558,10 +548,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -570,19 +556,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_MD is not set
#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
# Network device support
#
CONFIG_NETDEVICES=y
@@ -590,11 +563,20 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
#
-# PHY device support
+# MII PHY device drivers
#
-# CONFIG_PHYLIB is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
@@ -608,27 +590,15 @@ CONFIG_BFIN_TX_DESC_NUM=100
CONFIG_BFIN_RX_DESC_NUM=100
CONFIG_BFIN_MAC_RMII=y
# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -652,6 +622,7 @@ CONFIG_BFIN_MAC_RMII=y
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -670,6 +641,7 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=y
@@ -681,7 +653,13 @@ CONFIG_TOUCHSCREEN_AD7877=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_BF53X_PFBUTTONS is not set
# CONFIG_TWI_KEYPAD is not set
@@ -697,7 +675,7 @@ CONFIG_INPUT_UINPUT=y
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BFIN_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BF5xx_TIMERS is not set
# CONFIG_BF5xx_PPI is not set
@@ -749,14 +727,9 @@ CONFIG_CAN_BLACKFIN=m
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -764,11 +737,8 @@ CONFIG_HW_RANDOM=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
@@ -784,10 +754,11 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_BLACKFIN_GPIO is not set
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
@@ -823,18 +794,16 @@ CONFIG_SPI_BFIN=y
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -862,6 +831,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -886,11 +856,8 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
# Graphics support
@@ -898,12 +865,23 @@ CONFIG_HWMON=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -921,10 +899,6 @@ CONFIG_FB_BFIN_LANDSCAPE=y
# CONFIG_FB_BFIN_BGR is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
# CONFIG_LOGO is not set
#
@@ -936,8 +910,6 @@ CONFIG_SOUND=y
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
@@ -959,19 +931,23 @@ CONFIG_SND_PCM=m
# ALSA Blackfin devices
#
# CONFIG_SND_BLACKFIN_AD1836 is not set
-CONFIG_SND_BLACKFIN_AD1981B=m
# CONFIG_SND_BFIN_AD73311 is not set
#
-# SoC audio support
+# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
+# SoC Audio for the ADI Blackfin
+#
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS is not set
+# CONFIG_OSS_OBSOLETE is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
@@ -989,18 +965,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# USB Gadget Support
#
-# CONFIG_SPI_MMC is not set
+# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
@@ -1040,44 +1015,50 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
#
-# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_BFIN=y
#
-# DMA Engine support
+# Platform RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Clients
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_BFIN=y
#
-# DMA Devices
+# DMA Engine support
#
+# CONFIG_DMA_ENGINE is not set
#
-# Auxiliary Display support
+# DMA Clients
#
#
-# Virtualization
+# DMA Devices
#
#
@@ -1176,6 +1157,7 @@ CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1256,11 +1238,17 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+# CONFIG_DEBUG_MMRS is not set
# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_CPLB_INFO is not set
# CONFIG_ACCESS_CHECK is not set
@@ -1283,9 +1271,11 @@ CONFIG_SECURITY_CAPABILITIES=y
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index f429ebc3a96..8aeb6066b19 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -7,11 +7,10 @@ extra-y := init_task.o vmlinux.lds
obj-y := \
entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \
- fixed_code.o cplbinit.o cacheinit.o
+ fixed_code.o cplbinit.o cacheinit.o reboot.o bfin_gpio.o
-obj-$(CONFIG_BF53x) += bfin_gpio.o
-obj-$(CONFIG_BF561) += bfin_gpio.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o
obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o
obj-$(CONFIG_KGDB) += kgdb.o
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 7cf02f02a1d..e19164fb4cd 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -73,6 +73,11 @@ static int __init blackfin_dma_init(void)
/* Mark MEMDMA Channel 0 as requested since we're using it internally */
dma_ch[CH_MEM_STREAM0_DEST].chan_status = DMA_CHANNEL_REQUESTED;
dma_ch[CH_MEM_STREAM0_SRC].chan_status = DMA_CHANNEL_REQUESTED;
+
+#if defined(CONFIG_DEB_DMA_URGENT)
+ bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE()
+ | DEB1_URGENT | DEB2_URGENT | DEB3_URGENT);
+#endif
return 0;
}
@@ -265,10 +270,23 @@ void set_dma_next_desc_addr(unsigned int channel, unsigned long addr)
dma_ch[channel].regs->next_desc_ptr = addr;
SSYNC();
- pr_debug("set_dma_start_addr() : END\n");
+ pr_debug("set_dma_next_desc_addr() : END\n");
}
EXPORT_SYMBOL(set_dma_next_desc_addr);
+void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr)
+{
+ pr_debug("set_dma_curr_desc_addr() : BEGIN \n");
+
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->curr_desc_ptr = addr;
+ SSYNC();
+ pr_debug("set_dma_curr_desc_addr() : END\n");
+}
+EXPORT_SYMBOL(set_dma_curr_desc_addr);
+
void set_dma_x_count(unsigned int channel, unsigned short x_count)
{
BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
@@ -345,6 +363,16 @@ void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg)
}
EXPORT_SYMBOL(set_dma_sg);
+void set_dma_curr_addr(unsigned int channel, unsigned long addr)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->curr_addr_ptr = addr;
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_curr_addr);
+
/*------------------------------------------------------------------------------
* Get the DMA status of a specific DMA channel from the system.
*-----------------------------------------------------------------------------*/
@@ -408,6 +436,10 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size)
blackfin_dcache_flush_range((unsigned int)src,
(unsigned int)(src + size));
+ if ((unsigned long)dest < memory_end)
+ blackfin_dcache_invalidate_range((unsigned int)dest,
+ (unsigned int)(dest + size));
+
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
if ((unsigned long)src < (unsigned long)dest)
@@ -515,6 +547,8 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size)
}
}
+ SSYNC();
+
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
;
@@ -524,9 +558,6 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size)
bfin_write_MDMA_S0_CONFIG(0);
bfin_write_MDMA_D0_CONFIG(0);
- if ((unsigned long)dest < memory_end)
- blackfin_dcache_invalidate_range((unsigned int)dest,
- (unsigned int)(dest + size));
local_irq_restore(flags);
return dest;
@@ -555,13 +586,14 @@ void *safe_dma_memcpy(void *dest, const void *src, size_t size)
}
EXPORT_SYMBOL(safe_dma_memcpy);
-void dma_outsb(void __iomem *addr, const void *buf, unsigned short len)
+void dma_outsb(unsigned long addr, const void *buf, unsigned short len)
{
unsigned long flags;
local_irq_save(flags);
- blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len);
+ blackfin_dcache_flush_range((unsigned int)buf,
+ (unsigned int)(buf) + len);
bfin_write_MDMA_D0_START_ADDR(addr);
bfin_write_MDMA_D0_X_COUNT(len);
@@ -576,6 +608,8 @@ void dma_outsb(void __iomem *addr, const void *buf, unsigned short len)
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8);
bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8);
+ SSYNC();
+
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE));
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
@@ -588,10 +622,13 @@ void dma_outsb(void __iomem *addr, const void *buf, unsigned short len)
EXPORT_SYMBOL(dma_outsb);
-void dma_insb(const void __iomem *addr, void *buf, unsigned short len)
+void dma_insb(unsigned long addr, void *buf, unsigned short len)
{
unsigned long flags;
+ blackfin_dcache_invalidate_range((unsigned int)buf,
+ (unsigned int)(buf) + len);
+
local_irq_save(flags);
bfin_write_MDMA_D0_START_ADDR(buf);
bfin_write_MDMA_D0_X_COUNT(len);
@@ -606,7 +643,7 @@ void dma_insb(const void __iomem *addr, void *buf, unsigned short len)
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8);
bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8);
- blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len);
+ SSYNC();
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE));
@@ -619,13 +656,14 @@ void dma_insb(const void __iomem *addr, void *buf, unsigned short len)
}
EXPORT_SYMBOL(dma_insb);
-void dma_outsw(void __iomem *addr, const void *buf, unsigned short len)
+void dma_outsw(unsigned long addr, const void *buf, unsigned short len)
{
unsigned long flags;
local_irq_save(flags);
- blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len);
+ blackfin_dcache_flush_range((unsigned int)buf,
+ (unsigned int)(buf) + len * sizeof(short));
bfin_write_MDMA_D0_START_ADDR(addr);
bfin_write_MDMA_D0_X_COUNT(len);
@@ -640,6 +678,8 @@ void dma_outsw(void __iomem *addr, const void *buf, unsigned short len)
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16);
bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16);
+ SSYNC();
+
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE));
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
@@ -651,10 +691,13 @@ void dma_outsw(void __iomem *addr, const void *buf, unsigned short len)
}
EXPORT_SYMBOL(dma_outsw);
-void dma_insw(const void __iomem *addr, void *buf, unsigned short len)
+void dma_insw(unsigned long addr, void *buf, unsigned short len)
{
unsigned long flags;
+ blackfin_dcache_invalidate_range((unsigned int)buf,
+ (unsigned int)(buf) + len * sizeof(short));
+
local_irq_save(flags);
bfin_write_MDMA_D0_START_ADDR(buf);
@@ -670,7 +713,7 @@ void dma_insw(const void __iomem *addr, void *buf, unsigned short len)
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16);
bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16);
- blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len);
+ SSYNC();
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE));
@@ -683,13 +726,14 @@ void dma_insw(const void __iomem *addr, void *buf, unsigned short len)
}
EXPORT_SYMBOL(dma_insw);
-void dma_outsl(void __iomem *addr, const void *buf, unsigned short len)
+void dma_outsl(unsigned long addr, const void *buf, unsigned short len)
{
unsigned long flags;
local_irq_save(flags);
- blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len);
+ blackfin_dcache_flush_range((unsigned int)buf,
+ (unsigned int)(buf) + len * sizeof(long));
bfin_write_MDMA_D0_START_ADDR(addr);
bfin_write_MDMA_D0_X_COUNT(len);
@@ -704,6 +748,8 @@ void dma_outsl(void __iomem *addr, const void *buf, unsigned short len)
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32);
bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32);
+ SSYNC();
+
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE));
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
@@ -715,10 +761,13 @@ void dma_outsl(void __iomem *addr, const void *buf, unsigned short len)
}
EXPORT_SYMBOL(dma_outsl);
-void dma_insl(const void __iomem *addr, void *buf, unsigned short len)
+void dma_insl(unsigned long addr, void *buf, unsigned short len)
{
unsigned long flags;
+ blackfin_dcache_invalidate_range((unsigned int)buf,
+ (unsigned int)(buf) + len * sizeof(long));
+
local_irq_save(flags);
bfin_write_MDMA_D0_START_ADDR(buf);
@@ -734,7 +783,7 @@ void dma_insl(const void __iomem *addr, void *buf, unsigned short len)
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32);
bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32);
- blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len);
+ SSYNC();
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE));
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 5d488ef965c..3fe0cd49e8d 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -7,7 +7,7 @@
* Description: GPIO Abstraction Layer
*
* Modified:
- * Copyright 2006 Analog Devices Inc.
+ * Copyright 2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@@ -28,9 +28,9 @@
*/
/*
-* Number BF537/6/4 BF561 BF533/2/1
+* Number BF537/6/4 BF561 BF533/2/1 BF549/8/4/2
*
-* GPIO_0 PF0 PF0 PF0
+* GPIO_0 PF0 PF0 PF0 PA0...PJ13
* GPIO_1 PF1 PF1 PF1
* GPIO_2 PF2 PF2 PF2
* GPIO_3 PF3 PF3 PF3
@@ -80,6 +80,7 @@
* GPIO_47 PH15 PF47
*/
+#include <linux/delay.h>
#include <linux/module.h>
#include <linux/err.h>
#include <asm/blackfin.h>
@@ -87,6 +88,36 @@
#include <asm/portmux.h>
#include <linux/irq.h>
+#if ANOMALY_05000311 || ANOMALY_05000323
+enum {
+ AWA_data = SYSCR,
+ AWA_data_clear = SYSCR,
+ AWA_data_set = SYSCR,
+ AWA_toggle = SYSCR,
+ AWA_maska = UART_SCR,
+ AWA_maska_clear = UART_SCR,
+ AWA_maska_set = UART_SCR,
+ AWA_maska_toggle = UART_SCR,
+ AWA_maskb = UART_GCTL,
+ AWA_maskb_clear = UART_GCTL,
+ AWA_maskb_set = UART_GCTL,
+ AWA_maskb_toggle = UART_GCTL,
+ AWA_dir = SPORT1_STAT,
+ AWA_polar = SPORT1_STAT,
+ AWA_edge = SPORT1_STAT,
+ AWA_both = SPORT1_STAT,
+#if ANOMALY_05000311
+ AWA_inen = TIMER_ENABLE,
+#elif ANOMALY_05000323
+ AWA_inen = DMA1_1_CONFIG,
+#endif
+};
+ /* Anomaly Workaround */
+#define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name)
+#else
+#define AWA_DUMMY_READ(...) do { } while (0)
+#endif
+
#ifdef BF533_FAMILY
static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
(struct gpio_port_t *) FIO_FLAG_D,
@@ -116,11 +147,31 @@ static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
};
#endif
+#ifdef BF548_FAMILY
+static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
+ (struct gpio_port_t *)PORTA_FER,
+ (struct gpio_port_t *)PORTB_FER,
+ (struct gpio_port_t *)PORTC_FER,
+ (struct gpio_port_t *)PORTD_FER,
+ (struct gpio_port_t *)PORTE_FER,
+ (struct gpio_port_t *)PORTF_FER,
+ (struct gpio_port_t *)PORTG_FER,
+ (struct gpio_port_t *)PORTH_FER,
+ (struct gpio_port_t *)PORTI_FER,
+ (struct gpio_port_t *)PORTJ_FER,
+};
+#endif
+
static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)];
-char *str_ident = NULL;
-#define RESOURCE_LABEL_SIZE 16
+#define MAX_RESOURCES 256
+#define RESOURCE_LABEL_SIZE 16
+
+struct str_ident {
+ char name[RESOURCE_LABEL_SIZE];
+} *str_ident;
+
#ifdef CONFIG_PM
static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -141,21 +192,32 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INT
#endif /* CONFIG_PM */
+#if defined(BF548_FAMILY)
+inline int check_gpio(unsigned short gpio)
+{
+ if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
+ || gpio == GPIO_PH14 || gpio == GPIO_PH15
+ || gpio == GPIO_PJ14 || gpio == GPIO_PJ15
+ || gpio > MAX_BLACKFIN_GPIOS)
+ return -EINVAL;
+ return 0;
+}
+#else
inline int check_gpio(unsigned short gpio)
{
if (gpio >= MAX_BLACKFIN_GPIOS)
return -EINVAL;
return 0;
}
+#endif
static void set_label(unsigned short ident, const char *label)
{
if (label && str_ident) {
- strncpy(str_ident + ident * RESOURCE_LABEL_SIZE, label,
+ strncpy(str_ident[ident].name, label,
RESOURCE_LABEL_SIZE);
- str_ident[ident * RESOURCE_LABEL_SIZE +
- RESOURCE_LABEL_SIZE - 1] = 0;
+ str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
}
}
@@ -164,14 +226,13 @@ static char *get_label(unsigned short ident)
if (!str_ident)
return "UNKNOWN";
- return (str_ident[ident * RESOURCE_LABEL_SIZE] ?
- (str_ident + ident * RESOURCE_LABEL_SIZE) : "UNKNOWN");
+ return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
}
static int cmp_label(unsigned short ident, const char *label)
{
if (label && str_ident)
- return strncmp(str_ident + ident * RESOURCE_LABEL_SIZE,
+ return strncmp(str_ident[ident].name,
label, strlen(label));
else
return -EINVAL;
@@ -181,50 +242,84 @@ static int cmp_label(unsigned short ident, const char *label)
static void port_setup(unsigned short gpio, unsigned short usage)
{
if (!check_gpio(gpio)) {
- if (usage == GPIO_USAGE) {
+ if (usage == GPIO_USAGE)
*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
- } else
+ else
*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
SSYNC();
}
}
+#elif defined(BF548_FAMILY)
+static void port_setup(unsigned short gpio, unsigned short usage)
+{
+ if (usage == GPIO_USAGE)
+ gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
+ else
+ gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
+ SSYNC();
+}
#else
# define port_setup(...) do { } while (0)
#endif
#ifdef BF537_FAMILY
-
-#define PMUX_LUT_RES 0
-#define PMUX_LUT_OFFSET 1
-#define PMUX_LUT_ENTRIES 41
-#define PMUX_LUT_SIZE 2
-
-static unsigned short port_mux_lut[PMUX_LUT_ENTRIES][PMUX_LUT_SIZE] = {
- {P_PPI0_D13, 11}, {P_PPI0_D14, 11}, {P_PPI0_D15, 11},
- {P_SPORT1_TFS, 11}, {P_SPORT1_TSCLK, 11}, {P_SPORT1_DTPRI, 11},
- {P_PPI0_D10, 10}, {P_PPI0_D11, 10}, {P_PPI0_D12, 10},
- {P_SPORT1_RSCLK, 10}, {P_SPORT1_RFS, 10}, {P_SPORT1_DRPRI, 10},
- {P_PPI0_D8, 9}, {P_PPI0_D9, 9}, {P_SPORT1_DRSEC, 9},
- {P_SPORT1_DTSEC, 9}, {P_TMR2, 8}, {P_PPI0_FS3, 8}, {P_TMR3, 7},
- {P_SPI0_SSEL4, 7}, {P_TMR4, 6}, {P_SPI0_SSEL5, 6}, {P_TMR5, 5},
- {P_SPI0_SSEL6, 5}, {P_UART1_RX, 4}, {P_UART1_TX, 4}, {P_TMR6, 4},
- {P_TMR7, 4}, {P_UART0_RX, 3}, {P_UART0_TX, 3}, {P_DMAR0, 3},
- {P_DMAR1, 3}, {P_SPORT0_DTSEC, 1}, {P_SPORT0_DRSEC, 1},
- {P_CAN0_RX, 1}, {P_CAN0_TX, 1}, {P_SPI0_SSEL7, 1},
- {P_SPORT0_TFS, 0}, {P_SPORT0_DTPRI, 0}, {P_SPI0_SSEL2, 0},
- {P_SPI0_SSEL3, 0}
+static struct {
+ unsigned short res;
+ unsigned short offset;
+} port_mux_lut[] = {
+ {.res = P_PPI0_D13, .offset = 11},
+ {.res = P_PPI0_D14, .offset = 11},
+ {.res = P_PPI0_D15, .offset = 11},
+ {.res = P_SPORT1_TFS, .offset = 11},
+ {.res = P_SPORT1_TSCLK, .offset = 11},
+ {.res = P_SPORT1_DTPRI, .offset = 11},
+ {.res = P_PPI0_D10, .offset = 10},
+ {.res = P_PPI0_D11, .offset = 10},
+ {.res = P_PPI0_D12, .offset = 10},
+ {.res = P_SPORT1_RSCLK, .offset = 10},
+ {.res = P_SPORT1_RFS, .offset = 10},
+ {.res = P_SPORT1_DRPRI, .offset = 10},
+ {.res = P_PPI0_D8, .offset = 9},
+ {.res = P_PPI0_D9, .offset = 9},
+ {.res = P_SPORT1_DRSEC, .offset = 9},
+ {.res = P_SPORT1_DTSEC, .offset = 9},
+ {.res = P_TMR2, .offset = 8},
+ {.res = P_PPI0_FS3, .offset = 8},
+ {.res = P_TMR3, .offset = 7},
+ {.res = P_SPI0_SSEL4, .offset = 7},
+ {.res = P_TMR4, .offset = 6},
+ {.res = P_SPI0_SSEL5, .offset = 6},
+ {.res = P_TMR5, .offset = 5},
+ {.res = P_SPI0_SSEL6, .offset = 5},
+ {.res = P_UART1_RX, .offset = 4},
+ {.res = P_UART1_TX, .offset = 4},
+ {.res = P_TMR6, .offset = 4},
+ {.res = P_TMR7, .offset = 4},
+ {.res = P_UART0_RX, .offset = 3},
+ {.res = P_UART0_TX, .offset = 3},
+ {.res = P_DMAR0, .offset = 3},
+ {.res = P_DMAR1, .offset = 3},
+ {.res = P_SPORT0_DTSEC, .offset = 1},
+ {.res = P_SPORT0_DRSEC, .offset = 1},
+ {.res = P_CAN0_RX, .offset = 1},
+ {.res = P_CAN0_TX, .offset = 1},
+ {.res = P_SPI0_SSEL7, .offset = 1},
+ {.res = P_SPORT0_TFS, .offset = 0},
+ {.res = P_SPORT0_DTPRI, .offset = 0},
+ {.res = P_SPI0_SSEL2, .offset = 0},
+ {.res = P_SPI0_SSEL3, .offset = 0},
};
static void portmux_setup(unsigned short per, unsigned short function)
{
- u16 y, muxreg, offset;
+ u16 y, offset, muxreg;
- for (y = 0; y < PMUX_LUT_ENTRIES; y++) {
- if (port_mux_lut[y][PMUX_LUT_RES] == per) {
+ for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
+ if (port_mux_lut[y].res == per) {
/* SET PORTMUX REG */
- offset = port_mux_lut[y][PMUX_LUT_OFFSET];
+ offset = port_mux_lut[y].offset;
muxreg = bfin_read_PORT_MUX();
if (offset != 1) {
@@ -238,18 +333,42 @@ static void portmux_setup(unsigned short per, unsigned short function)
}
}
}
+#elif defined(BF548_FAMILY)
+inline void portmux_setup(unsigned short portno, unsigned short function)
+{
+ u32 pmux;
+
+ pmux = gpio_array[gpio_bank(portno)]->port_mux;
+
+ pmux &= ~(0x3 << (2 * gpio_sub_n(portno)));
+ pmux |= (function & 0x3) << (2 * gpio_sub_n(portno));
+ gpio_array[gpio_bank(portno)]->port_mux = pmux;
+}
+
+inline u16 get_portmux(unsigned short portno)
+{
+ u32 pmux;
+
+ pmux = gpio_array[gpio_bank(portno)]->port_mux;
+
+ return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
+}
#else
# define portmux_setup(...) do { } while (0)
#endif
+#ifndef BF548_FAMILY
static void default_gpio(unsigned short gpio)
{
unsigned short bank, bitmask;
+ unsigned long flags;
bank = gpio_bank(gpio);
bitmask = gpio_bit(gpio);
+ local_irq_save(flags);
+
gpio_bankb[bank]->maska_clear = bitmask;
gpio_bankb[bank]->maskb_clear = bitmask;
SSYNC();
@@ -258,24 +377,32 @@ static void default_gpio(unsigned short gpio)
gpio_bankb[bank]->polar &= ~bitmask;
gpio_bankb[bank]->both &= ~bitmask;
gpio_bankb[bank]->edge &= ~bitmask;
+ AWA_DUMMY_READ(edge);
+ local_irq_restore(flags);
+
}
+#else
+# define default_gpio(...) do { } while (0)
+#endif
static int __init bfin_gpio_init(void)
{
-
- str_ident = kzalloc(RESOURCE_LABEL_SIZE * 256, GFP_KERNEL);
- if (!str_ident)
+ str_ident = kcalloc(MAX_RESOURCES,
+ sizeof(struct str_ident), GFP_KERNEL);
+ if (str_ident == NULL)
return -ENOMEM;
+ memset(str_ident, 0, MAX_RESOURCES * sizeof(struct str_ident));
+
printk(KERN_INFO "Blackfin GPIO Controller\n");
return 0;
}
-
arch_initcall(bfin_gpio_init);
+#ifndef BF548_FAMILY
/***********************************************************
*
* FUNCTIONS: Blackfin General Purpose Ports Access Functions
@@ -305,6 +432,7 @@ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
else \
gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
+ AWA_DUMMY_READ(name); \
local_irq_restore(flags); \
} \
EXPORT_SYMBOL(set_gpio_ ## name);
@@ -316,6 +444,22 @@ SET_GPIO(edge)
SET_GPIO(both)
+#if ANOMALY_05000311 || ANOMALY_05000323
+#define SET_GPIO_SC(name) \
+void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
+{ \
+ unsigned long flags; \
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ local_irq_save(flags); \
+ if (arg) \
+ gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
+ else \
+ gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
+} \
+EXPORT_SYMBOL(set_gpio_ ## name);
+#else
#define SET_GPIO_SC(name) \
void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
{ \
@@ -326,37 +470,20 @@ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
} \
EXPORT_SYMBOL(set_gpio_ ## name);
+#endif
SET_GPIO_SC(maska)
SET_GPIO_SC(maskb)
-
-#if defined(ANOMALY_05000311)
-void set_gpio_data(unsigned short gpio, unsigned short arg)
-{
- unsigned long flags;
- BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
- local_irq_save(flags);
- if (arg)
- gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
- else
- gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
- bfin_read_CHIPID();
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(set_gpio_data);
-#else
SET_GPIO_SC(data)
-#endif
-
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311 || ANOMALY_05000323
void set_gpio_toggle(unsigned short gpio)
{
unsigned long flags;
BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
- bfin_read_CHIPID();
+ AWA_DUMMY_READ(toggle);
local_irq_restore(flags);
}
#else
@@ -371,13 +498,27 @@ EXPORT_SYMBOL(set_gpio_toggle);
/*Set current PORT date (16-bit word)*/
+#if ANOMALY_05000311 || ANOMALY_05000323
#define SET_GPIO_P(name) \
void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \
{ \
+ unsigned long flags; \
+ local_irq_save(flags); \
gpio_bankb[gpio_bank(gpio)]->name = arg; \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
} \
EXPORT_SYMBOL(set_gpiop_ ## name);
+#else
+#define SET_GPIO_P(name) \
+void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \
+{ \
+ gpio_bankb[gpio_bank(gpio)]->name = arg; \
+} \
+EXPORT_SYMBOL(set_gpiop_ ## name);
+#endif
+SET_GPIO_P(data)
SET_GPIO_P(dir)
SET_GPIO_P(inen)
SET_GPIO_P(polar)
@@ -387,31 +528,30 @@ SET_GPIO_P(maska)
SET_GPIO_P(maskb)
-#if defined(ANOMALY_05000311)
-void set_gpiop_data(unsigned short gpio, unsigned short arg)
-{
- unsigned long flags;
- local_irq_save(flags);
- gpio_bankb[gpio_bank(gpio)]->data = arg;
- bfin_read_CHIPID();
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(set_gpiop_data);
-#else
-SET_GPIO_P(data)
-#endif
-
-
-
/* Get a specific bit */
-
+#if ANOMALY_05000311 || ANOMALY_05000323
+#define GET_GPIO(name) \
+unsigned short get_gpio_ ## name(unsigned short gpio) \
+{ \
+ unsigned long flags; \
+ unsigned short ret; \
+ local_irq_save(flags); \
+ ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
+ return ret; \
+} \
+EXPORT_SYMBOL(get_gpio_ ## name);
+#else
#define GET_GPIO(name) \
unsigned short get_gpio_ ## name(unsigned short gpio) \
{ \
return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \
} \
EXPORT_SYMBOL(get_gpio_ ## name);
+#endif
+GET_GPIO(data)
GET_GPIO(dir)
GET_GPIO(inen)
GET_GPIO(polar)
@@ -420,33 +560,31 @@ GET_GPIO(both)
GET_GPIO(maska)
GET_GPIO(maskb)
-
-#if defined(ANOMALY_05000311)
-unsigned short get_gpio_data(unsigned short gpio)
-{
- unsigned long flags;
- unsigned short ret;
- BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
- local_irq_save(flags);
- ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->data >> gpio_sub_n(gpio));
- bfin_read_CHIPID();
- local_irq_restore(flags);
- return ret;
-}
-EXPORT_SYMBOL(get_gpio_data);
-#else
-GET_GPIO(data)
-#endif
-
/*Get current PORT date (16-bit word)*/
+#if ANOMALY_05000311 || ANOMALY_05000323
+#define GET_GPIO_P(name) \
+unsigned short get_gpiop_ ## name(unsigned short gpio) \
+{ \
+ unsigned long flags; \
+ unsigned short ret; \
+ local_irq_save(flags); \
+ ret = (gpio_bankb[gpio_bank(gpio)]->name); \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
+ return ret; \
+} \
+EXPORT_SYMBOL(get_gpiop_ ## name);
+#else
#define GET_GPIO_P(name) \
unsigned short get_gpiop_ ## name(unsigned short gpio) \
{ \
return (gpio_bankb[gpio_bank(gpio)]->name);\
} \
EXPORT_SYMBOL(get_gpiop_ ## name);
+#endif
+GET_GPIO_P(data)
GET_GPIO_P(dir)
GET_GPIO_P(inen)
GET_GPIO_P(polar)
@@ -455,21 +593,6 @@ GET_GPIO_P(both)
GET_GPIO_P(maska)
GET_GPIO_P(maskb)
-#if defined(ANOMALY_05000311)
-unsigned short get_gpiop_data(unsigned short gpio)
-{
- unsigned long flags;
- unsigned short ret;
- local_irq_save(flags);
- ret = gpio_bankb[gpio_bank(gpio)]->data;
- bfin_read_CHIPID();
- local_irq_restore(flags);
- return ret;
-}
-EXPORT_SYMBOL(get_gpiop_data);
-#else
-GET_GPIO_P(data)
-#endif
#ifdef CONFIG_PM
/***********************************************************
@@ -593,6 +716,8 @@ u32 gpio_pm_setup(void)
}
}
+ AWA_DUMMY_READ(maskb_set);
+
if (sic_iwr)
return sic_iwr;
else
@@ -624,12 +749,99 @@ void gpio_pm_restore(void)
gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;
}
+ AWA_DUMMY_READ(maskb);
}
#endif
+#endif /* BF548_FAMILY */
+/***********************************************************
+*
+* FUNCTIONS: Blackfin Peripheral Resource Allocation
+* and PortMux Setup
+*
+* INPUTS/OUTPUTS:
+* per Peripheral Identifier
+* label String
+*
+* DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+#ifdef BF548_FAMILY
+int peripheral_request(unsigned short per, const char *label)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ /*
+ * Don't cares are pins with only one dedicated function
+ */
+
+ if (per & P_DONTCARE)
+ return 0;
+
+ if (!(per & P_DEFINED))
+ return -ENODEV;
+
+ if (check_gpio(ident) < 0)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
+ printk(KERN_ERR
+ "%s: Peripheral %d is already reserved as GPIO by %s !\n",
+ __FUNCTION__, ident, get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) {
+
+ u16 funct = get_portmux(ident);
+
+ /*
+ * Pin functions like AMC address strobes my
+ * be requested and used by several drivers
+ */
+
+ if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) {
+
+ /*
+ * Allow that the identical pin function can
+ * be requested from the same driver twice
+ */
+
+ if (cmp_label(ident, label) == 0)
+ goto anyway;
+ printk(KERN_ERR
+ "%s: Peripheral %d function %d is already reserved by %s !\n",
+ __FUNCTION__, ident, P_FUNCT2MUX(per), get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+ }
+anyway:
+ reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
+
+ portmux_setup(ident, P_FUNCT2MUX(per));
+ port_setup(ident, PERIPHERAL_USAGE);
+
+ local_irq_restore(flags);
+ set_label(ident, label);
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request);
+#else
int peripheral_request(unsigned short per, const char *label)
{
@@ -680,7 +892,7 @@ int peripheral_request(unsigned short per, const char *label)
printk(KERN_ERR
"%s: Peripheral %d function %d is already"
- "reserved by %s !\n",
+ " reserved by %s !\n",
__FUNCTION__, ident, P_FUNCT2MUX(per),
get_label(ident));
dump_stack();
@@ -691,8 +903,6 @@ int peripheral_request(unsigned short per, const char *label)
}
anyway:
-
-
portmux_setup(per, P_FUNCT2MUX(per));
port_setup(ident, PERIPHERAL_USAGE);
@@ -704,6 +914,7 @@ anyway:
return 0;
}
EXPORT_SYMBOL(peripheral_request);
+#endif
int peripheral_request_list(unsigned short per[], const char *label)
{
@@ -711,9 +922,15 @@ int peripheral_request_list(unsigned short per[], const char *label)
int ret;
for (cnt = 0; per[cnt] != 0; cnt++) {
+
ret = peripheral_request(per[cnt], label);
- if (ret < 0)
- return ret;
+
+ if (ret < 0) {
+ for ( ; cnt > 0; cnt--) {
+ peripheral_free(per[cnt - 1]);
+ }
+ return ret;
+ }
}
return 0;
@@ -748,6 +965,8 @@ void peripheral_free(unsigned short per)
reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident);
+ set_label(ident, "free");
+
local_irq_restore(flags);
}
EXPORT_SYMBOL(peripheral_free);
@@ -768,8 +987,8 @@ EXPORT_SYMBOL(peripheral_free_list);
* FUNCTIONS: Blackfin GPIO Driver
*
* INPUTS/OUTPUTS:
-* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
-*
+* gpio PIO Number between 0 and MAX_BLACKFIN_GPIOS
+* label String
*
* DESCRIPTION: Blackfin GPIO Driver API
*
@@ -787,17 +1006,39 @@ int gpio_request(unsigned short gpio, const char *label)
local_irq_save(flags);
+ /*
+ * Allow that the identical GPIO can
+ * be requested from the same driver twice
+ * Do nothing and return -
+ */
+
+ if (cmp_label(gpio, label) == 0) {
+ local_irq_restore(flags);
+ return 0;
+ }
+
if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
+ printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
+ gpio, get_label(gpio));
dump_stack();
local_irq_restore(flags);
return -EBUSY;
}
+ if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ printk(KERN_ERR
+ "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
+ gpio, get_label(gpio));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
local_irq_restore(flags);
port_setup(gpio, GPIO_USAGE);
+ set_label(gpio, label);
return 0;
}
@@ -823,10 +1064,57 @@ void gpio_free(unsigned short gpio)
reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ set_label(gpio, "free");
+
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_free);
+#ifdef BF548_FAMILY
+void gpio_direction_input(unsigned short gpio)
+{
+ unsigned long flags;
+
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+
+ local_irq_save(flags);
+ gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
+ gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+void gpio_direction_output(unsigned short gpio)
+{
+ unsigned long flags;
+
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+
+ local_irq_save(flags);
+ gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
+ gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+void gpio_set_value(unsigned short gpio, unsigned short arg)
+{
+ if (arg)
+ gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio);
+ else
+ gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio);
+
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+unsigned short gpio_get_value(unsigned short gpio)
+{
+ return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio)));
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+#else
+
void gpio_direction_input(unsigned short gpio)
{
unsigned long flags;
@@ -836,6 +1124,7 @@ void gpio_direction_input(unsigned short gpio)
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
+ AWA_DUMMY_READ(inen);
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_direction_input);
@@ -849,6 +1138,28 @@ void gpio_direction_output(unsigned short gpio)
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
+ AWA_DUMMY_READ(dir);
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_direction_output);
+
+/* If we are booting from SPI and our board lacks a strong enough pull up,
+ * the core can reset and execute the bootrom faster than the resistor can
+ * pull the signal logically high. To work around this (common) error in
+ * board design, we explicitly set the pin back to GPIO mode, force /CS
+ * high, and wait for the electrons to do their thing.
+ *
+ * This function only makes sense to be called from reset code, but it
+ * lives here as we need to force all the GPIO states w/out going through
+ * BUG() checks and such.
+ */
+void bfin_gpio_reset_spi0_ssel1(void)
+{
+ u16 gpio = P_IDENT(P_SPI0_SSEL1);
+
+ port_setup(gpio, GPIO_USAGE);
+ gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+ udelay(1);
+}
+
+#endif /*BF548_FAMILY */
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
index 70455949cfd..2198afe40f3 100644
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -60,6 +60,7 @@ EXPORT_SYMBOL(csum_partial_copy);
* their interface isn't gonna change any time soon now, so
* it's OK to leave it out of version control.
*/
+EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcmp);
diff --git a/arch/blackfin/kernel/cacheinit.c b/arch/blackfin/kernel/cacheinit.c
index 4d41a40e813..62cbba7364b 100644
--- a/arch/blackfin/kernel/cacheinit.c
+++ b/arch/blackfin/kernel/cacheinit.c
@@ -21,9 +21,10 @@
#include <asm/cacheflush.h>
#include <asm/blackfin.h>
+#include <asm/cplb.h>
#include <asm/cplbinit.h>
-#if defined(CONFIG_BLKFIN_CACHE)
+#if defined(CONFIG_BFIN_ICACHE)
void bfin_icache_init(void)
{
unsigned long *table = icplb_table;
@@ -44,7 +45,7 @@ void bfin_icache_init(void)
}
#endif
-#if defined(CONFIG_BLKFIN_DCACHE)
+#if defined(CONFIG_BFIN_DCACHE)
void bfin_dcache_init(void)
{
unsigned long *table = dcplb_table;
diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplbinit.c
index bbdb403fcb5..f2db6a5e2b5 100644
--- a/arch/blackfin/kernel/cplbinit.c
+++ b/arch/blackfin/kernel/cplbinit.c
@@ -23,6 +23,7 @@
#include <linux/module.h>
#include <asm/blackfin.h>
+#include <asm/cplb.h>
#include <asm/cplbinit.h>
u_long icplb_table[MAX_CPLBS+1];
@@ -56,7 +57,7 @@ struct s_cplb {
struct cplb_tab switch_d;
};
-#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
static struct cplb_desc cplb_data[] = {
{
.start = 0,
@@ -230,8 +231,8 @@ static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_en
cplb_data[i].psize,
cplb_data[i].i_conf);
} else {
-#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
- if (i == SDRAM_KERN) {
+#if defined(CONFIG_BFIN_ICACHE)
+ if (ANOMALY_05000263 && i == SDRAM_KERN) {
fill_cplbtab(t,
cplb_data[i].start,
cplb_data[i].end,
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
new file mode 100644
index 00000000000..6ec518a8111
--- /dev/null
+++ b/arch/blackfin/kernel/early_printk.c
@@ -0,0 +1,214 @@
+/*
+ * File: arch/blackfin/kernel/early_printk.c
+ * Based on: arch/x86_64/kernel/early_printk.c
+ * Author: Robin Getz <rgetz@blackfin.uclinux.org
+ *
+ * Created: 14Aug2007
+ * Description: allow a console to be used for early printk
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/console.h>
+#include <linux/string.h>
+#include <asm/blackfin.h>
+#include <asm/irq_handler.h>
+#include <asm/early_printk.h>
+
+#ifdef CONFIG_SERIAL_BFIN
+extern struct console *bfin_earlyserial_init(unsigned int port,
+ unsigned int cflag);
+#endif
+
+static struct console *early_console;
+
+/* Default console */
+#define DEFAULT_PORT 0
+#define DEFAULT_CFLAG CS8|B57600
+
+/* Default console for early crashes */
+#define DEFAULT_EARLY_PORT "serial,uart0,57600"
+
+#ifdef CONFIG_SERIAL_CORE
+/* What should get here is "0,57600" */
+static struct console * __init earlyserial_init(char *buf)
+{
+ int baud, bit;
+ char parity;
+ unsigned int serial_port = DEFAULT_PORT;
+ unsigned int cflag = DEFAULT_CFLAG;
+
+ serial_port = simple_strtoul(buf, &buf, 10);
+ buf++;
+
+ cflag = 0;
+ baud = simple_strtoul(buf, &buf, 10);
+ switch (baud) {
+ case 1200:
+ cflag |= B1200;
+ break;
+ case 2400:
+ cflag |= B2400;
+ break;
+ case 4800:
+ cflag |= B4800;
+ break;
+ case 9600:
+ cflag |= B9600;
+ break;
+ case 19200:
+ cflag |= B19200;
+ break;
+ case 38400:
+ cflag |= B38400;
+ break;
+ case 115200:
+ cflag |= B115200;
+ break;
+ default:
+ cflag |= B57600;
+ }
+
+ parity = buf[0];
+ buf++;
+ switch (parity) {
+ case 'e':
+ cflag |= PARENB;
+ break;
+ case 'o':
+ cflag |= PARODD;
+ break;
+ }
+
+ bit = simple_strtoul(buf, &buf, 10);
+ switch (bit) {
+ case 5:
+ cflag |= CS5;
+ break;
+ case 6:
+ cflag |= CS5;
+ break;
+ case 7:
+ cflag |= CS5;
+ break;
+ default:
+ cflag |= CS8;
+ }
+
+#ifdef CONFIG_SERIAL_BFIN
+ return bfin_earlyserial_init(serial_port, cflag);
+#else
+ return NULL;
+#endif
+
+}
+#endif
+
+int __init setup_early_printk(char *buf)
+{
+
+ /* Crashing in here would be really bad, so check both the var
+ and the pointer before we start using it
+ */
+ if (!buf)
+ return 0;
+
+ if (!*buf)
+ return 0;
+
+ if (early_console != NULL)
+ return 0;
+
+#ifdef CONFIG_SERIAL_BFIN
+ /* Check for Blackfin Serial */
+ if (!strncmp(buf, "serial,uart", 11)) {
+ buf += 11;
+ early_console = earlyserial_init(buf);
+ }
+#endif
+#ifdef CONFIG_FB
+ /* TODO: add framebuffer console support */
+#endif
+
+ if (likely(early_console)) {
+ early_console->flags |= CON_BOOT;
+
+ register_console(early_console);
+ printk(KERN_INFO "early printk enabled on %s%d\n",
+ early_console->name,
+ early_console->index);
+ }
+
+ return 0;
+}
+
+/*
+ * Set up a temporary Event Vector Table, so if something bad happens before
+ * the kernel is fully started, it doesn't vector off into somewhere we don't
+ * know
+ */
+
+asmlinkage void __init init_early_exception_vectors(void)
+{
+ SSYNC();
+
+ /* cannot program in software:
+ * evt0 - emulation (jtag)
+ * evt1 - reset
+ */
+ bfin_write_EVT2(early_trap);
+ bfin_write_EVT3(early_trap);
+ bfin_write_EVT5(early_trap);
+ bfin_write_EVT6(early_trap);
+ bfin_write_EVT7(early_trap);
+ bfin_write_EVT8(early_trap);
+ bfin_write_EVT9(early_trap);
+ bfin_write_EVT10(early_trap);
+ bfin_write_EVT11(early_trap);
+ bfin_write_EVT12(early_trap);
+ bfin_write_EVT13(early_trap);
+ bfin_write_EVT14(early_trap);
+ bfin_write_EVT15(early_trap);
+ CSYNC();
+
+ /* Set all the return from interupt, exception, NMI to a known place
+ * so if we do a RETI, RETX or RETN by mistake - we go somewhere known
+ * Note - don't change RETS - we are in a subroutine, or
+ * RETE - since it might screw up if emulator is attached
+ */
+ asm("\tRETI = %0; RETX = %0; RETN = %0;\n"
+ : : "p"(early_trap));
+
+}
+
+asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
+{
+ /* This can happen before the uart is initialized, so initialize
+ * the UART now
+ */
+ if (likely(early_console == NULL))
+ setup_early_printk(DEFAULT_EARLY_PORT);
+
+ dump_bfin_regs(fp, retaddr);
+ dump_bfin_trace_buffer();
+
+ panic("Died early");
+}
+
+early_param("earlyprintk", setup_early_printk);
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 1fc001c7abd..73647c15877 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -34,6 +34,7 @@
#include <linux/kallsyms.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <asm/trace.h>
static unsigned long irq_err_count;
static spinlock_t irq_controller_lock;
@@ -97,9 +98,8 @@ int show_interrupts(struct seq_file *p, void *v)
*/
#ifdef CONFIG_DO_IRQ_L1
-asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)__attribute__((l1_text));
+__attribute__((l1_text))
#endif
-
asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs;
@@ -144,4 +144,12 @@ void __init init_IRQ(void)
}
init_arch_irq();
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ /* Now that evt_ivhw is set up, turn this on */
+ trace_buff_offset = 0;
+ bfin_write_TBUFCTL(BFIN_TRACE_ON);
+ printk(KERN_INFO "Hardware Trace expanded to %ik\n",
+ 1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN);
+#endif
}
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 6a7aefe4834..9124467651c 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -134,31 +134,6 @@ void cpu_idle(void)
}
}
-void machine_restart(char *__unused)
-{
-#if defined(CONFIG_BLKFIN_CACHE)
- bfin_write_IMEM_CONTROL(0x01);
- SSYNC();
-#endif
- bfin_reset();
- /* Dont do anything till the reset occurs */
- while (1) {
- SSYNC();
- }
-}
-
-void machine_halt(void)
-{
- for (;;)
- asm volatile ("idle");
-}
-
-void machine_power_off(void)
-{
- for (;;)
- asm volatile ("idle");
-}
-
void show_regs(struct pt_regs *regs)
{
printk(KERN_NOTICE "\n");
@@ -420,7 +395,8 @@ void finish_atomic_sections (struct pt_regs *regs)
#if defined(CONFIG_ACCESS_CHECK)
int _access_ok(unsigned long addr, unsigned long size)
{
-
+ if (size == 0)
+ return 1;
if (addr > (addr + size))
return 0;
if (segment_eq(get_fs(), KERNEL_DS))
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index ed800c7456d..64ce5fea860 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -44,6 +44,7 @@
#include <asm/processor.h>
#include <asm/asm-offsets.h>
#include <asm/dma.h>
+#include <asm/fixed_code.h>
#define MAX_SHARED_LIBS 3
#define TEXT_OFFSET 0
@@ -169,6 +170,9 @@ static inline int is_user_addr_valid(struct task_struct *child,
&& start + len <= (unsigned long)sraml->addr + sraml->length)
return 0;
+ if (start >= FIXED_CODE_START && start + len <= FIXED_CODE_END)
+ return 0;
+
return -EIO;
}
@@ -215,9 +219,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
copied = sizeof(tmp);
} else
#endif
- copied =
- access_process_vm(child, addr + add, &tmp,
- sizeof(tmp), 0);
+ if (addr + add >= FIXED_CODE_START
+ && addr + add + sizeof(tmp) <= FIXED_CODE_END) {
+ memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+ copied = sizeof(tmp);
+ } else
+ copied = access_process_vm(child, addr + add, &tmp,
+ sizeof(tmp), 0);
pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
if (copied != sizeof(tmp))
break;
@@ -281,9 +289,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
copied = sizeof(data);
} else
#endif
- copied =
- access_process_vm(child, addr + add, &data,
- sizeof(data), 1);
+ if (addr + add >= FIXED_CODE_START
+ && addr + add + sizeof(data) <= FIXED_CODE_END) {
+ memcpy((void *)(addr + add), &data, sizeof(data));
+ copied = sizeof(data);
+ } else
+ copied = access_process_vm(child, addr + add, &data,
+ sizeof(data), 1);
pr_debug("ptrace: copied size %d\n", copied);
if (copied != sizeof(data))
break;
diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c
new file mode 100644
index 00000000000..356078ec462
--- /dev/null
+++ b/arch/blackfin/kernel/reboot.c
@@ -0,0 +1,78 @@
+/*
+ * arch/blackfin/kernel/reboot.c - handle shutdown/reboot
+ *
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <asm/bfin-global.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+
+#if defined(BF537_FAMILY) || defined(BF533_FAMILY)
+#define SYSCR_VAL 0x0
+#elif defined(BF561_FAMILY)
+#define SYSCR_VAL 0x20
+#elif defined(BF548_FAMILY)
+#define SYSCR_VAL 0x10
+#endif
+
+/* A system soft reset makes external memory unusable
+ * so force this function into L1.
+ */
+__attribute__((l1_text))
+void bfin_reset(void)
+{
+ /* force BMODE and disable Core B (as needed) */
+ bfin_write_SYSCR(SYSCR_VAL);
+
+ /* we use asm ssync here because it's save and we save some L1 */
+ asm("ssync;");
+
+ while (1) {
+ /* initiate system soft reset with magic 0x7 */
+ bfin_write_SWRST(0x7);
+ asm("ssync;");
+ /* clear system soft reset */
+ bfin_write_SWRST(0);
+ asm("ssync;");
+ /* issue core reset */
+ asm("raise 1");
+ }
+}
+
+__attribute__((weak))
+void native_machine_restart(char *cmd)
+{
+}
+
+void machine_restart(char *cmd)
+{
+ native_machine_restart(cmd);
+ local_irq_disable();
+ bfin_reset();
+}
+
+__attribute__((weak))
+void native_machine_halt(void)
+{
+ idle_with_irq_disabled();
+}
+
+void machine_halt(void)
+{
+ native_machine_halt();
+}
+
+__attribute__((weak))
+void native_machine_power_off(void)
+{
+ idle_with_irq_disabled();
+}
+
+void machine_power_off(void)
+{
+ native_machine_power_off();
+}
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 88f221b89b3..8dcd76e87ed 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -39,10 +39,12 @@
#include <linux/cramfs_fs.h>
#include <linux/romfs_fs.h>
+#include <asm/cplb.h>
#include <asm/cacheflush.h>
#include <asm/blackfin.h>
#include <asm/cplbinit.h>
#include <asm/fixed_code.h>
+#include <asm/early_printk.h>
u16 _bfin_swrst;
@@ -66,21 +68,21 @@ char __initdata command_line[COMMAND_LINE_SIZE];
void __init bf53x_cache_init(void)
{
-#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
generate_cpl_tables();
#endif
-#ifdef CONFIG_BLKFIN_CACHE
+#ifdef CONFIG_BFIN_ICACHE
bfin_icache_init();
printk(KERN_INFO "Instruction Cache Enabled\n");
#endif
-#ifdef CONFIG_BLKFIN_DCACHE
+#ifdef CONFIG_BFIN_DCACHE
bfin_dcache_init();
printk(KERN_INFO "Data Cache Enabled"
-# if defined CONFIG_BLKFIN_WB
+# if defined CONFIG_BFIN_WB
" (write-back)"
-# elif defined CONFIG_BLKFIN_WT
+# elif defined CONFIG_BFIN_WT
" (write-through)"
# endif
"\n");
@@ -156,8 +158,10 @@ static __init void parse_cmdline_early(char *cmdline_p)
1;
}
}
+ } else if (!memcmp(to, "earlyprintk=", 12)) {
+ to += 12;
+ setup_early_printk(to);
}
-
}
c = *(to++);
if (!c)
@@ -176,22 +180,36 @@ void __init setup_arch(char **cmdline_p)
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
+
+#if defined(CONFIG_CMDLINE_BOOL)
+ strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
+ command_line[sizeof(command_line) - 1] = 0;
+#endif
+
+ /* Keep a copy of command line */
+ *cmdline_p = &command_line[0];
+ memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+ boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
+
+ /* setup memory defaults from the user config */
+ physical_mem_end = 0;
+ _ramend = CONFIG_MEM_SIZE * 1024 * 1024;
+
+ parse_cmdline_early(&command_line[0]);
+
cclk = get_cclk();
sclk = get_sclk();
-#if !defined(CONFIG_BFIN_KERNEL_CLOCK) && defined(ANOMALY_05000273)
- if (cclk == sclk)
+#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
+ if (ANOMALY_05000273 && cclk == sclk)
panic("ANOMALY 05000273, SCLK can not be same as CCLK");
#endif
-#if defined(ANOMALY_05000266)
- bfin_read_IMDMA_D0_IRQ_STATUS();
- bfin_read_IMDMA_D1_IRQ_STATUS();
-#endif
-
-#ifdef DEBUG_SERIAL_EARLY_INIT
- bfin_console_init(); /* early console registration */
- /* this give a chance to get printk() working before crash. */
+#ifdef BF561_FAMILY
+ if (ANOMALY_05000266) {
+ bfin_read_IMDMA_D0_IRQ_STATUS();
+ bfin_read_IMDMA_D1_IRQ_STATUS();
+ }
#endif
printk(KERN_INFO "Hardware Trace ");
@@ -212,22 +230,6 @@ void __init setup_arch(char **cmdline_p)
flash_probe();
#endif
-#if defined(CONFIG_CMDLINE_BOOL)
- strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
- command_line[sizeof(command_line) - 1] = 0;
-#endif
-
- /* Keep a copy of command line */
- *cmdline_p = &command_line[0];
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
-
- /* setup memory defaults from the user config */
- physical_mem_end = 0;
- _ramend = CONFIG_MEM_SIZE * 1024 * 1024;
-
- parse_cmdline_early(&command_line[0]);
-
if (physical_mem_end == 0)
physical_mem_end = _ramend;
@@ -260,7 +262,7 @@ void __init setup_arch(char **cmdline_p)
&& ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
mtd_size =
PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-# if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+# if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -289,7 +291,7 @@ void __init setup_arch(char **cmdline_p)
_ebss = memory_mtd_start; /* define _ebss for compatible */
#endif /* CONFIG_MTD_UCLINUX */
-#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -334,13 +336,11 @@ void __init setup_arch(char **cmdline_p)
CPU, bfin_revid());
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
- printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu Mhz System Clock\n",
+ printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
cclk / 1000000, sclk / 1000000);
-#if defined(ANOMALY_05000273)
- if ((cclk >> 1) <= sclk)
+ if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
-#endif
printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
@@ -535,9 +535,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "I-CACHE:\tOFF\n");
if ((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE))
seq_printf(m, "D-CACHE:\tON"
-#if defined CONFIG_BLKFIN_WB
+#if defined CONFIG_BFIN_WB
" (write-back)"
-#elif defined CONFIG_BLKFIN_WT
+#elif defined CONFIG_BFIN_WT
" (write-through)"
#endif
"\n");
@@ -566,15 +566,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
}
- seq_printf(m, "I-CACHE Size:\t%dKB\n", BLKFIN_ICACHESIZE / 1024);
+ seq_printf(m, "I-CACHE Size:\t%dKB\n", BFIN_ICACHESIZE / 1024);
seq_printf(m, "D-CACHE Size:\t%dKB\n", dcache_size);
seq_printf(m, "I-CACHE Setup:\t%d Sub-banks/%d Ways, %d Lines/Way\n",
- BLKFIN_ISUBBANKS, BLKFIN_IWAYS, BLKFIN_ILINES);
+ BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
seq_printf(m,
"D-CACHE Setup:\t%d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
- dsup_banks, BLKFIN_DSUBBANKS, BLKFIN_DWAYS,
- BLKFIN_DLINES);
-#ifdef CONFIG_BLKFIN_CACHE_LOCK
+ dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
+ BFIN_DLINES);
+#ifdef CONFIG_BFIN_ICACHE_LOCK
switch (read_iloc()) {
case WAY0_L:
seq_printf(m, "Way0 Locked-Down\n");
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 792a8416fe1..8823e9ade58 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -51,10 +51,9 @@ void __init trap_init(void)
CSYNC();
}
-asmlinkage void trap_c(struct pt_regs *fp);
-
int kstack_depth_to_print = 48;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
static int printk_address(unsigned long address)
{
struct vm_list_struct *vml;
@@ -131,10 +130,22 @@ static int printk_address(unsigned long address)
/* we were unable to find this address anywhere */
return printk("[<0x%p>]", (void *)address);
}
+#endif
+
+asmlinkage void double_fault_c(struct pt_regs *fp)
+{
+ printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
+ dump_bfin_regs(fp, (void *)fp->retx);
+ panic("Double Fault - unrecoverable event\n");
+
+}
asmlinkage void trap_c(struct pt_regs *fp)
{
- int j, sig = 0;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+ int j;
+#endif
+ int sig = 0;
siginfo_t info;
unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
@@ -391,10 +402,6 @@ asmlinkage void trap_c(struct pt_regs *fp)
break;
}
- info.si_signo = sig;
- info.si_errno = 0;
- info.si_addr = (void *)fp->pc;
- force_sig_info(sig, &info, current);
if (sig != 0 && sig != SIGTRAP) {
unsigned long stack;
dump_bfin_regs(fp, (void *)fp->retx);
@@ -403,6 +410,10 @@ asmlinkage void trap_c(struct pt_regs *fp)
if (current->mm == NULL)
panic("Kernel exception");
}
+ info.si_signo = sig;
+ info.si_errno = 0;
+ info.si_addr = (void *)fp->pc;
+ force_sig_info(sig, &info, current);
/* if the address that we are about to return to is not valid, set it
* to a valid address, if we have a current application or panic
@@ -429,24 +440,56 @@ asmlinkage void trap_c(struct pt_regs *fp)
/* Typical exception handling routines */
+#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
+
void dump_bfin_trace_buffer(void)
{
- int tflags;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+ int tflags, i = 0;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ int j, index;
+#endif
+
trace_buffer_save(tflags);
+ printk(KERN_EMERG "Hardware Trace:\n");
+
if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
- int i;
- printk(KERN_EMERG "Hardware Trace:\n");
- for (i = 0; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
- printk(KERN_EMERG "%2i Target : ", i);
+ for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
+ printk(KERN_EMERG "%4i Target : ", i);
printk_address((unsigned long)bfin_read_TBUF());
- printk("\n" KERN_EMERG " Source : ");
+ printk("\n" KERN_EMERG " Source : ");
printk_address((unsigned long)bfin_read_TBUF());
printk("\n");
}
}
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ if (trace_buff_offset)
+ index = trace_buff_offset/4 - 1;
+ else
+ index = EXPAND_LEN;
+
+ j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
+ while (j) {
+ printk(KERN_EMERG "%4i Target : ", i);
+ printk_address(software_trace_buff[index]);
+ index -= 1;
+ if (index < 0 )
+ index = EXPAND_LEN;
+ printk("\n" KERN_EMERG " Source : ");
+ printk_address(software_trace_buff[index]);
+ index -= 1;
+ if (index < 0)
+ index = EXPAND_LEN;
+ printk("\n");
+ j--;
+ i++;
+ }
+#endif
+
trace_buffer_restore(tflags);
+#endif
}
EXPORT_SYMBOL(dump_bfin_trace_buffer);
@@ -510,7 +553,9 @@ void show_stack(struct task_struct *task, unsigned long *stack)
void dump_stack(void)
{
unsigned long stack;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int tflags;
+#endif
trace_buffer_save(tflags);
dump_bfin_trace_buffer();
show_stack(current, &stack);
@@ -559,8 +604,7 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
unsigned short x = 0;
for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) {
if (!(i & 0xF))
- printk(KERN_EMERG "\n" KERN_EMERG
- "0x%08x: ", i);
+ printk("\n" KERN_EMERG "0x%08x: ", i);
if (get_user(x, (unsigned short *)i))
break;
@@ -655,6 +699,42 @@ asmlinkage int sys_bfin_spinlock(int *spinlock)
return ret;
}
+int bfin_request_exception(unsigned int exception, void (*handler)(void))
+{
+ void (*curr_handler)(void);
+
+ if (exception > 0x3F)
+ return -EINVAL;
+
+ curr_handler = ex_table[exception];
+
+ if (curr_handler != ex_replaceable)
+ return -EBUSY;
+
+ ex_table[exception] = handler;
+
+ return 0;
+}
+EXPORT_SYMBOL(bfin_request_exception);
+
+int bfin_free_exception(unsigned int exception, void (*handler)(void))
+{
+ void (*curr_handler)(void);
+
+ if (exception > 0x3F)
+ return -EINVAL;
+
+ curr_handler = ex_table[exception];
+
+ if (curr_handler != handler)
+ return -EBUSY;
+
+ ex_table[exception] = ex_replaceable;
+
+ return 0;
+}
+EXPORT_SYMBOL(bfin_free_exception);
+
void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
{
switch (cplb_panic) {
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index fb53780247b..eec43674a46 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -49,7 +49,8 @@ SECTIONS
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
- *(.text.lock)
+ KPROBES_TEXT
+ *(.text.*)
*(.fixup)
. = ALIGN(16);
@@ -61,7 +62,7 @@ SECTIONS
__etext = .;
}
- RODATA
+ RO_DATA(PAGE_SIZE)
.data :
{
@@ -72,50 +73,63 @@ SECTIONS
__sdata = .;
. = ALIGN(THREAD_SIZE);
*(.data.init_task)
- DATA_DATA
- CONSTRUCTORS
. = ALIGN(32);
*(.data.cacheline_aligned)
+ DATA_DATA
+ *(.data.*)
+ CONSTRUCTORS
+
. = ALIGN(THREAD_SIZE);
__edata = .;
}
___init_begin = .;
- .init :
+
+ .init.text :
{
. = ALIGN(PAGE_SIZE);
__sinittext = .;
*(.init.text)
__einittext = .;
+ }
+ .init.data :
+ {
+ . = ALIGN(16);
*(.init.data)
+ }
+ .init.setup :
+ {
. = ALIGN(16);
___setup_start = .;
*(.init.setup)
___setup_end = .;
- ___start___param = .;
- *(__param)
- ___stop___param = .;
+ }
+ .initcall.init :
+ {
___initcall_start = .;
INITCALLS
___initcall_end = .;
+ }
+ .con_initcall.init :
+ {
___con_initcall_start = .;
*(.con_initcall.init)
___con_initcall_end = .;
- ___security_initcall_start = .;
- *(.security_initcall.init)
- ___security_initcall_end = .;
+ }
+ SECURITY_INIT
+ .init.ramfs :
+ {
. = ALIGN(4);
___initramfs_start = .;
*(.init.ramfs)
___initramfs_end = .;
- . = ALIGN(4);
}
__l1_lma_start = .;
- .text_l1 L1_CODE_START : AT(LOADADDR(.init) + SIZEOF(.init))
+ .text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs))
{
. = ALIGN(4);
__stext_l1 = .;
@@ -164,13 +178,19 @@ SECTIONS
{
. = ALIGN(4);
___bss_start = .;
- *(.bss)
+ *(.bss .bss.*)
*(COMMON)
. = ALIGN(4);
___bss_stop = .;
__end = .;
}
+ STABS_DEBUG
+
+ DWARF_DEBUG
+
+ NOTES
+
/DISCARD/ :
{
*(.exit.text)
diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S
index b88c5d2d1eb..219fa2877c6 100644
--- a/arch/blackfin/lib/memcmp.S
+++ b/arch/blackfin/lib/memcmp.S
@@ -61,7 +61,7 @@ ENTRY(_memcmp)
LSETUP (.Lquad_loop_s, .Lquad_loop_e) LC0=P1;
.Lquad_loop_s:
-#ifdef ANOMALY_05000202
+#if ANOMALY_05000202
R0 = [P0++];
R1 = [I0++];
#else
diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S
index 14a5585bbd0..2e6336492b4 100644
--- a/arch/blackfin/lib/memcpy.S
+++ b/arch/blackfin/lib/memcpy.S
@@ -98,7 +98,7 @@ ENTRY(_memcpy)
R0 = R1;
I1 = P1;
R3 = [I1++];
-#ifdef ANOMALY_05000202
+#if ANOMALY_05000202
.Lword_loops:
[P0++] = R3;
.Lword_loope:
diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S
index 6ee6e206e77..33f8653145b 100644
--- a/arch/blackfin/lib/memmove.S
+++ b/arch/blackfin/lib/memmove.S
@@ -70,7 +70,7 @@ ENTRY(_memmove)
R1 = [I0++];
LSETUP (.Lquad_loops, .Lquad_loope) LC0=P1;
-#ifdef ANOMALY_05000202
+#if ANOMALY_05000202
.Lquad_loops:
[P0++] = R1;
.Lquad_loope:
@@ -102,7 +102,7 @@ ENTRY(_memmove)
R1 = B[P3--] (Z);
CC = P2 == 0;
IF CC JUMP .Lno_loop;
-#ifdef ANOMALY_05000245
+#if ANOMALY_05000245
NOP;
NOP;
#endif
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 4545f363e64..a57b52d207c 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -34,7 +34,9 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
+#include <linux/pata_platform.h>
#include <linux/irq.h>
+#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
/*
@@ -93,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -101,7 +103,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, {
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 2, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -110,24 +112,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
#endif
};
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
@@ -227,6 +245,43 @@ static struct platform_device isp1362_hcd_device = {
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 38
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 2,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x2030C000,
+ .end = 0x2030C01F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2030D018,
+ .end = 0x2030D01B,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *cm_bf533_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
@@ -250,7 +305,11 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
#endif
};
@@ -261,6 +320,10 @@ static int __init cm_bf533_init(void)
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
return 0;
}
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 0000b8f1239..5c1e35d3c01 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -35,7 +35,9 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
+#include <linux/pata_platform.h>
#include <linux/irq.h>
+#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
/*
@@ -50,6 +52,12 @@ static struct platform_device rtc_device = {
};
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+ .name = "bfin-adv7393",
+};
+#endif
+
/*
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
@@ -131,7 +139,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -143,7 +151,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -154,24 +162,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
#endif
};
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
@@ -193,13 +217,54 @@ static struct platform_device bfin_uart_device = {
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 1,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x20314020,
+ .end = 0x2031403F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2031401C,
+ .end = 0x2031401F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ &bfin_fb_adv7393_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
@@ -209,6 +274,10 @@ static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
};
static int __init ezkit_init(void)
@@ -218,6 +287,10 @@ static int __init ezkit_init(void)
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
return 0;
}
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index a9143c4cbdc..8975e06ea15 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -37,8 +37,11 @@
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb_isp1362.h>
#endif
+#include <linux/pata_platform.h>
#include <linux/irq.h>
+#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -77,6 +80,12 @@ static struct platform_device smc91x_device = {
};
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+ .name = "bfin-adv7393",
+};
+#endif
+
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
static struct resource net2272_bfin_resources[] = {
{
@@ -177,7 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -189,7 +198,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -200,7 +209,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 31250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
@@ -210,7 +219,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -219,7 +228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -231,16 +240,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "fxs-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J11_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "fxo-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J19_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
@@ -250,7 +259,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad5304_spi",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 2,
.platform_data = NULL,
.controller_data = &ad5304_chip_info,
@@ -259,17 +268,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
@@ -309,6 +334,43 @@ static struct platform_device bfin_sport1_uart_device = {
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 1,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x20314020,
+ .end = 0x2031403F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2031401C,
+ .end = 0x2031401F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
@@ -318,12 +380,16 @@ static struct platform_device *stamp_devices[] __initdata = {
&smc91x_device,
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ &bfin_fb_adv7393_device,
+#endif
+
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
@@ -334,6 +400,10 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_sport0_uart_device,
&bfin_sport1_uart_device,
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
};
static int __init stamp_init(void)
@@ -355,8 +425,23 @@ static int __init stamp_init(void)
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+ spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
#endif
+ return 0;
}
arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
+# define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN)
+ bfin_write_FIO_INEN(~BIT_TO_SET);
+ bfin_write_FIO_DIR(BIT_TO_SET);
+ bfin_write_FIO_FLAG_C(BIT_TO_SET);
+#endif
+}
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 7dd0e9c3a93..1ded945a6fa 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -32,11 +32,9 @@
#include <asm/blackfin.h>
#include <asm/trace.h>
#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-#if CONFIG_DEBUG_KERNEL_START
-#include <asm/mach-common/def_LPBlackfin.h>
-#endif
.global __rambase
.global __ramstart
@@ -52,10 +50,12 @@ __INIT
ENTRY(__start)
/* R0: argument of command line string, passed from uboot, save it */
R7 = R0;
- /* Set the SYSCFG register:
- * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit)
- */
- R0 = 0x36;
+ /* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+ R0 = SYSCFG_SNEN;
+#else
+ R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
SYSCFG = R0;
R0 = 0;
@@ -97,40 +97,10 @@ ENTRY(__start)
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
-#if CONFIG_DEBUG_KERNEL_START
-
-/*
- * Set up a temporary Event Vector Table, so if something bad happens before
- * the kernel is fully started, it doesn't vector off into the bootloaders
- * table
- */
- P0.l = lo(EVT2);
- P0.h = hi(EVT2);
- P1.l = lo(EVT15);
- P1.h = hi(EVT15);
- P2.l = debug_kernel_start_trap;
- P2.h = debug_kernel_start_trap;
-
- RTS = P2;
- RTI = P2;
- RTX = P2;
- RTN = P2;
- RTE = P2;
-
-.Lfill_temp_vector_table:
- [P0++] = P2; /* Core Event Vector Table */
- CC = P0 == P1;
- if !CC JUMP .Lfill_temp_vector_table
- P0 = r0;
- P1 = r0;
- P2 = r0;
-
-#endif
-
p0.h = hi(FIO_MASKA_C);
p0.l = lo(FIO_MASKA_C);
r0 = 0xFFFF(Z);
@@ -144,38 +114,38 @@ ENTRY(__start)
ssync;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -211,6 +181,12 @@ ENTRY(__start)
fp = sp;
usp = sp;
+#ifdef CONFIG_EARLY_PRINTK
+ SP += -12;
+ call _init_early_exception_vectors;
+ SP += 12;
+#endif
+
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bf53x_relocate_l1_mem;
#if CONFIG_BFIN_KERNEL_CLOCK
@@ -264,7 +240,7 @@ ENTRY(__start)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
@@ -417,8 +393,8 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
@@ -456,276 +432,6 @@ ENTRY(_start_dma_code)
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-ENTRY(_bfin_reset)
- /* No more interrupts to be handled*/
- CLI R6;
- SSYNC;
-
-#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
- p0.h = hi(FIO_INEN);
- p0.l = lo(FIO_INEN);
- r0.l = ~(1 << CONFIG_ENET_FLASH_PIN);
- w[p0] = r0.l;
-
- p0.h = hi(FIO_DIR);
- p0.l = lo(FIO_DIR);
- r0.l = (1 << CONFIG_ENET_FLASH_PIN);
- w[p0] = r0.l;
-
- p0.h = hi(FIO_FLAG_C);
- p0.l = lo(FIO_FLAG_C);
- r0.l = (1 << CONFIG_ENET_FLASH_PIN);
- w[p0] = r0.l;
-#endif
-
- /* Clear the IMASK register */
- p0.h = hi(IMASK);
- p0.l = lo(IMASK);
- r0 = 0x0;
- [p0] = r0;
-
- /* Clear the ILAT register */
- p0.h = hi(ILAT);
- p0.l = lo(ILAT);
- r0 = [p0];
- [p0] = r0;
- SSYNC;
-
- /* make sure SYSCR is set to use BMODE */
- P0.h = hi(SYSCR);
- P0.l = lo(SYSCR);
- R0.l = 0x0;
- W[P0] = R0.l;
- SSYNC;
-
- /* issue a system soft reset */
- P1.h = hi(SWRST);
- P1.l = lo(SWRST);
- R1.l = 0x0007;
- W[P1] = R1;
- SSYNC;
-
- /* clear system soft reset */
- R0.l = 0x0000;
- W[P0] = R0;
- SSYNC;
-
- /* issue core reset */
- raise 1;
-
- RTS;
-ENDPROC(_bfin_reset)
-
-#if CONFIG_DEBUG_KERNEL_START
-debug_kernel_start_trap:
- /* Set up a temp stack in L1 - SDRAM might not be working */
- P0.L = lo(L1_DATA_A_START + 0x100);
- P0.H = hi(L1_DATA_A_START + 0x100);
- SP = P0;
-
- /* Make sure the Clocks are the way I think they should be */
- r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
- r0 = r0 << 9; /* Shift it over, */
- r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
- r0 = r1 | r0;
- r1 = PLL_BYPASS; /* Bypass the PLL? */
- r1 = r1 << 8; /* Shift it over */
- r0 = r1 | r0; /* add them all together */
-
- p0.h = hi(PLL_CTL);
- p0.l = lo(PLL_CTL); /* Load the address */
- cli r2; /* Disable interrupts */
- ssync;
- w[p0] = r0.l; /* Set the value */
- idle; /* Wait for the PLL to stablize */
- sti r2; /* Enable interrupts */
-
-.Lcheck_again1:
- p0.h = hi(PLL_STAT);
- p0.l = lo(PLL_STAT);
- R0 = W[P0](Z);
- CC = BITTST(R0,5);
- if ! CC jump .Lcheck_again1;
-
- /* Configure SCLK & CCLK Dividers */
- r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
- p0.h = hi(PLL_DIV);
- p0.l = lo(PLL_DIV);
- w[p0] = r0.l;
- ssync;
-
- /* Make sure UART is enabled - you can never be sure */
-
-/*
- * Setup for console. Argument comes from the menuconfig
- */
-
-#ifdef CONFIG_BAUD_9600
-#define CONSOLE_BAUD_RATE 9600
-#elif CONFIG_BAUD_19200
-#define CONSOLE_BAUD_RATE 19200
-#elif CONFIG_BAUD_38400
-#define CONSOLE_BAUD_RATE 38400
-#elif CONFIG_BAUD_57600
-#define CONSOLE_BAUD_RATE 57600
-#elif CONFIG_BAUD_115200
-#define CONSOLE_BAUD_RATE 115200
-#endif
-
- p0.h = hi(UART_GCTL);
- p0.l = lo(UART_GCTL);
- r0 = 0x00(Z);
- w[p0] = r0.L; /* To Turn off UART clocks */
- ssync;
-
- p0.h = hi(UART_LCR);
- p0.l = lo(UART_LCR);
- r0 = 0x83(Z);
- w[p0] = r0.L; /* To enable DLL writes */
- ssync;
-
- R1 = (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_SCLK_DIV) / (CONSOLE_BAUD_RATE * 16));
-
- p0.h = hi(UART_DLL);
- p0.l = lo(UART_DLL);
- r0 = 0xFF(Z);
- r0 = R1 & R0;
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(UART_DLH);
- p0.l = lo(UART_DLH);
- r1 >>= 8 ;
- w[p0] = r1.L;
- ssync;
-
- p0.h = hi(UART_GCTL);
- p0.l = lo(UART_GCTL);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable UART clock */
- ssync;
-
- p0.h = hi(UART_LCR);
- p0.l = lo(UART_LCR);
- r0 = 0x03(Z);
- w[p0] = r0.L; /* To Turn on UART */
- ssync;
-
- p0.h = hi(UART_GCTL);
- p0.l = lo(UART_GCTL);
- r0 = 0x01(Z);
- w[p0] = r0.L; /* To Turn on UART Clocks */
- ssync;
-
- P0.h = hi(UART_THR);
- P0.l = lo(UART_THR);
- P1.h = hi(UART_LSR);
- P1.l = lo(UART_LSR);
-
- R0.L = 'K';
- call .Lwait_char;
- R0.L='e';
- call .Lwait_char;
- R0.L='r';
- call .Lwait_char;
- R0.L='n'
- call .Lwait_char;
- R0.L='e'
- call .Lwait_char;
- R0.L='l';
- call .Lwait_char;
- R0.L=' ';
- call .Lwait_char;
- R0.L='c';
- call .Lwait_char;
- R0.L='r';
- call .Lwait_char;
- R0.L='a';
- call .Lwait_char;
- R0.L='s';
- call .Lwait_char;
- R0.L='h';
- call .Lwait_char;
- R0.L='\r';
- call .Lwait_char;
- R0.L='\n';
- call .Lwait_char;
-
- R0.L='S';
- call .Lwait_char;
- R0.L='E';
- call .Lwait_char;
- R0.L='Q'
- call .Lwait_char;
- R0.L='S'
- call .Lwait_char;
- R0.L='T';
- call .Lwait_char;
- R0.L='A';
- call .Lwait_char;
- R0.L='T';
- call .Lwait_char;
- R0.L='=';
- call .Lwait_char;
- R2 = SEQSTAT;
- call .Ldump_reg;
-
- R0.L=' ';
- call .Lwait_char;
- R0.L='R';
- call .Lwait_char;
- R0.L='E'
- call .Lwait_char;
- R0.L='T'
- call .Lwait_char;
- R0.L='X';
- call .Lwait_char;
- R0.L='=';
- call .Lwait_char;
- R2 = RETX;
- call .Ldump_reg;
-
- R0.L='\r';
- call .Lwait_char;
- R0.L='\n';
- call .Lwait_char;
-
-.Ldebug_kernel_start_trap_done:
- JUMP .Ldebug_kernel_start_trap_done;
-.Ldump_reg:
- R3 = 32;
- R4 = 0x0F;
- R5 = ':'; /* one past 9 */
-
-.Ldump_reg2:
- R0 = R2;
- R3 += -4;
- R0 >>>= R3;
- R0 = R0 & R4;
- R0 += 0x30;
- CC = R0 <= R5;
- if CC JUMP .Ldump_reg1;
- R0 += 7;
-
-.Ldump_reg1:
- R1.l = W[P1];
- CC = BITTST(R1, 5);
- if !CC JUMP .Ldump_reg1;
- W[P0] = r0;
-
- CC = R3 == 0;
- if !CC JUMP .Ldump_reg2
- RTS;
-
-.Lwait_char:
- R1.l = W[P1];
- CC = BITTST(R1, 5);
- if !CC JUMP .Lwait_char;
- W[P0] = r0;
- RTS;
-
-#endif /* CONFIG_DEBUG_KERNEL_START */
-
.data
/*
diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig
index cc9ae38a4dd..e6648db0951 100644
--- a/arch/blackfin/mach-bf537/Kconfig
+++ b/arch/blackfin/mach-bf537/Kconfig
@@ -2,33 +2,6 @@ if (BF537 || BF534 || BF536)
menu "BF537 Specific Configuration"
-comment "PORT F/G Selection"
-choice
- prompt "Select BF537/6/4 default GPIO PFx PORTx"
- help
- Quick Hack for BF537/6/4 default GPIO PFx PORTF.
-
-config BF537_PORT_F
- bool "Select BF537/6/4 default GPIO PFx PORTF"
- depends on (BF537 || BF536 || BF534)
- help
- Quick Hack for BF537/6/4 default GPIO PFx PORTF.
-
-config BF537_PORT_G
- bool "Select BF537/6/4 default GPIO PFx PORTG"
- depends on (BF537 || BF536 || BF534)
- help
- Quick Hack for BF537/6/4 default GPIO PFx PORTG.
-
-config BF537_PORT_H
- bool "Select BF537/6/4 default GPIO PFx PORTH"
- depends on (BF537 || BF536 || BF534)
- help
- Quick Hack for BF537/6/4 default GPIO PFx PORTH
- Use only when Blackfin EMAC support is not required.
-
-endchoice
-
comment "Interrupt Priority Assignment"
menu "Priority"
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index a8f947b7275..44dea05e1d0 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -35,7 +35,9 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
+#include <linux/pata_platform.h>
#include <linux/irq.h>
+#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
/*
@@ -113,7 +115,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -125,7 +127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -136,7 +138,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
@@ -146,7 +148,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
@@ -156,7 +158,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 7,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -165,7 +167,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -174,17 +176,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
@@ -316,6 +334,43 @@ static struct platform_device bfin_mac_device = {
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 64
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 2,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x2030C000,
+ .end = 0x2030C01F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2030D018,
+ .end = 0x2030D01B,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *cm_bf537_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
@@ -347,7 +402,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
#endif
};
@@ -358,6 +417,10 @@ static int __init cm_bf537_init(void)
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
return 0;
}
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 648d984e98d..5e9d09eb857 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -8,7 +8,7 @@
*
* Modified:
* Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@@ -34,20 +34,74 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb_isp1362.h>
+#endif
+#include <linux/pata_platform.h>
#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <linux/usb_sl811.h>
+#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <linux/spi/ad7877.h>
/*
* Name the Board for the /proc/cpuinfo
*/
-char *bfin_board_name = "UNKNOWN BOARD";
+char *bfin_board_name = "GENERIC Board";
/*
* Driver needs to know address, irq and flag pin.
*/
+#define ISP1761_BASE 0x203C0000
+#define ISP1761_IRQ IRQ_PF7
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+ [0] = {
+ .name = "isp1761-regs",
+ .start = ISP1761_BASE + 0x00000000,
+ .end = ISP1761_BASE + 0x000fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ISP1761_IRQ,
+ .end = ISP1761_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_isp1761_device = {
+ .name = "isp1761",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_isp1761_resources),
+ .resource = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+ &bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+ unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
+
+ return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+ platform_device_unregister(&bfin_isp1761_device);
+}
+
+arch_initcall(bfin_isp1761_init);
+#endif
+
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
static struct resource bfin_pcmcia_cf_resources[] = {
{
@@ -59,10 +113,6 @@ static struct resource bfin_pcmcia_cf_resources[] = {
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_PROG_INTA,
- .end = IRQ_PROG_INTA,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- }, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
@@ -96,14 +146,7 @@ static struct resource smc91x_resources[] = {
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_PROG_INTB,
- .end = IRQ_PROG_INTB,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- }, {
- /*
- * denotes the flag pin and is used directly if
- * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
- */
+
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -117,6 +160,28 @@ static struct platform_device smc91x_device = {
};
#endif
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = 0x203FB800,
+ .end = 0x203FB800 + 8,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+ },
+};
+
+static struct platform_device dm9000_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+};
+#endif
+
#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
static struct resource sl811_hcd_resources[] = {
{
@@ -128,12 +193,8 @@ static struct resource sl811_hcd_resources[] = {
.end = 0x20340004,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_PROG_INTA,
- .end = IRQ_PROG_INTA,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- }, {
- .start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
- .end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
+ .start = CONFIG_USB_SL811_BFIN_IRQ,
+ .end = CONFIG_USB_SL811_BFIN_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
@@ -141,21 +202,19 @@ static struct resource sl811_hcd_resources[] = {
#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
void sl811_port_power(struct device *dev, int is_on)
{
- unsigned short mask = (1<<CONFIG_USB_SL811_BFIN_GPIO_VBUS);
-
- bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+ gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+ gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
if (is_on)
- bfin_write_FIO_FLAG_S(mask);
+ gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
else
- bfin_write_FIO_FLAG_C(mask);
+ gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
}
#endif
static struct sl811_platform_data sl811_priv = {
.potpg = 10,
- .power = 250, /* == 500mA */
+ .power = 250, /* == 500mA */
#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
.port_power = &sl811_port_power,
#endif
@@ -170,7 +229,6 @@ static struct platform_device sl811_hcd_device = {
.num_resources = ARRAY_SIZE(sl811_hcd_resources),
.resource = sl811_hcd_resources,
};
-
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -184,13 +242,9 @@ static struct resource isp1362_hcd_resources[] = {
.end = 0x20360004,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_PROG_INTA,
- .end = IRQ_PROG_INTA,
+ .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+ .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- }, {
- .start = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
- .end = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
- .flags = IORESOURCE_IRQ,
},
};
@@ -246,7 +300,8 @@ static struct platform_device net2272_bfin_device = {
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader",
@@ -302,70 +357,198 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
};
#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+ .ctl_reg = 0x4, /* send zero */
+ .enable_dma = 0,
+ .bits_per_word = 8,
+ .cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+static struct bfin5xx_spi_chip ad5304_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+ .model = 7877,
+ .vref_delay_usecs = 50, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .pressure_max = 1000,
+ .pressure_min = 0,
+ .stopacq_polarity = 1,
+ .first_conversion_delay = 3,
+ .acquisition_time = 1,
+ .averaging = 1,
+ .pen_down_acc_interval = 1,
+};
+#endif
+
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
- .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
},
#endif
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
#endif
-
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_PBX)
+ {
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J11_JUMPER,
+ .controller_data = &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J19_JUMPER,
+ .controller_data = &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+ {
+ .modalias = "ad5304_spi",
+ .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 2,
+ .platform_data = NULL,
+ .controller_data = &ad5304_chip_info,
+ .mode = SPI_MODE_2,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+ {
+ .modalias = "ad7877",
+ .platform_data = &bfin_ad7877_ts_info,
+ .irq = IRQ_PF6,
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &spi_ad7877_chip_info,
+ },
+#endif
};
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
static struct platform_device bfin_fb_device = {
- .name = "bf537-fb",
+ .name = "bf537-lq035",
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+ .name = "bfin-adv7393",
};
#endif
@@ -390,15 +573,86 @@ static struct platform_device bfin_uart_device = {
};
#endif
-static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
- &rtc_device,
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+ [0] = {
+ .start = TWI0_REGBASE,
+ .end = TWI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI,
+ .end = IRQ_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+ .name = "i2c-bfin-twi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+ .resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 1,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x20314020,
+ .end = 0x2031403F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2031401C,
+ .end = 0x2031401F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
#endif
+static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
&bfin_pcmcia_cf_device,
#endif
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
&sl811_hcd_device,
#endif
@@ -411,6 +665,10 @@ static struct platform_device *stamp_devices[] __initdata = {
&smc91x_device,
#endif
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+ &dm9000_device,
+#endif
+
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mac_device,
#endif
@@ -420,16 +678,33 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
&bfin_fb_device,
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ &bfin_fb_adv7393_device,
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+ &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
};
static int __init stamp_init(void)
@@ -437,9 +712,21 @@ static int __init stamp_init(void)
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+ spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
#endif
return 0;
}
arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+ /* workaround reboot hang when booting from SPI */
+ if ((bfin_read_SYSCR() & 0x7) == 0x3)
+ bfin_gpio_reset_spi0_ssel1();
+}
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 8806f1230f2..20507e92a3a 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -38,6 +38,7 @@
#include <linux/usb_isp1362.h>
#endif
#include <linux/irq.h>
+#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <linux/usb_sl811.h>
@@ -130,15 +131,13 @@ static struct resource sl811_hcd_resources[] = {
#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
void sl811_port_power(struct device *dev, int is_on)
{
- unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS);
-
- bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+ gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+ gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
if (is_on)
- bfin_write_FIO_FLAG_S(mask);
+ gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
else
- bfin_write_FIO_FLAG_C(mask);
+ gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
}
#endif
@@ -323,7 +322,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -336,7 +335,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -348,7 +347,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
@@ -357,7 +356,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
@@ -366,7 +365,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 7,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -375,7 +374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -396,24 +395,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
};
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
static struct platform_device bfin_fb_device = {
- .name = "bf537-fb",
+ .name = "bf537-lq035",
};
#endif
@@ -469,7 +484,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9c43d775651..47d7d4a0e73 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -37,10 +37,13 @@
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb_isp1362.h>
#endif
+#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb_sl811.h>
+#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
#include <linux/spi/ad7877.h>
/*
@@ -199,15 +202,13 @@ static struct resource sl811_hcd_resources[] = {
#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
void sl811_port_power(struct device *dev, int is_on)
{
- unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS);
-
- bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+ gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+ gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
if (is_on)
- bfin_write_FIO_FLAG_S(mask);
+ gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
else
- bfin_write_FIO_FLAG_C(mask);
+ gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
}
#endif
@@ -407,7 +408,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -420,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -432,7 +433,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
@@ -441,7 +442,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
@@ -450,7 +451,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -459,7 +460,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -470,16 +471,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "fxs-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J11_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "fxo-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J19_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
@@ -488,7 +489,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad5304_spi",
.max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 2,
.platform_data = NULL,
.controller_data = &ad5304_chip_info,
@@ -509,23 +510,45 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
};
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
static struct platform_device bfin_fb_device = {
- .name = "bf537-fb",
+ .name = "bf537-lq035",
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+ .name = "bfin-adv7393",
};
#endif
@@ -551,9 +574,24 @@ static struct platform_device bfin_uart_device = {
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+ [0] = {
+ .start = TWI0_REGBASE,
+ .end = TWI0_REGBASE,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI,
+ .end = IRQ_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct platform_device i2c_bfin_twi_device = {
.name = "i2c-bfin-twi",
.id = 0,
+ .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+ .resource = bfin_twi0_resource,
};
#endif
@@ -569,6 +607,43 @@ static struct platform_device bfin_sport1_uart_device = {
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 1,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x20314020,
+ .end = 0x2031403F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2031401C,
+ .end = 0x2031401F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
&bfin_pcmcia_cf_device,
@@ -603,13 +678,17 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
&bfin_fb_device,
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ &bfin_fb_adv7393_device,
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
@@ -622,6 +701,10 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_sport0_uart_device,
&bfin_sport1_uart_device,
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
};
static int __init stamp_init(void)
@@ -632,7 +715,18 @@ static int __init stamp_init(void)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
return 0;
}
arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+ /* workaround reboot hang when booting from SPI */
+ if ((bfin_read_SYSCR() & 0x7) == 0x3)
+ bfin_gpio_reset_spi0_ssel1();
+}
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 429c8a1019d..3014fe8dd15 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -33,6 +33,7 @@
#include <asm/trace.h>
#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
@@ -50,10 +51,12 @@ __INIT
ENTRY(__start)
/* R0: argument of command line string, passed from uboot, save it */
R7 = R0;
- /* Set the SYSCFG register:
- * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit)
- */
- R0 = 0x36;
+ /* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+ R0 = SYSCFG_SNEN;
+#else
+ R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
SYSCFG = R0;
R0 = 0;
@@ -95,43 +98,43 @@ ENTRY(__start)
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -141,12 +144,12 @@ ENTRY(__start)
*/
p0.h = hi(BFIN_PORT_MUX);
p0.l = lo(BFIN_PORT_MUX);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
R0.L = W[P0]; /* Read */
SSYNC;
#endif
R0 = (PGDE_UART | PFTE_UART)(Z);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
W[P0] = R0.L; /* Write */
SSYNC;
#endif
@@ -155,12 +158,12 @@ ENTRY(__start)
p0.h = hi(PORTF_FER);
p0.l = lo(PORTF_FER);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
R0.L = W[P0]; /* Read */
SSYNC;
#endif
R0 = 0x000F(Z);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
W[P0] = R0.L; /* Write */
SSYNC;
#endif
@@ -221,6 +224,12 @@ ENTRY(__start)
fp = sp;
usp = sp;
+#ifdef CONFIG_EARLY_PRINTK
+ SP += -12;
+ call _init_early_exception_vectors;
+ SP += 12;
+#endif
+
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bf53x_relocate_l1_mem;
#if CONFIG_BFIN_KERNEL_CLOCK
@@ -274,7 +283,7 @@ ENTRY(__start)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
@@ -436,8 +445,8 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
@@ -475,85 +484,6 @@ ENTRY(_start_dma_code)
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-ENTRY(_bfin_reset)
- /* No more interrupts to be handled*/
- CLI R6;
- SSYNC;
-
-#if defined(CONFIG_MTD_M25P80)
- /*
- * The following code fix the SPI flash reboot issue,
- * /CS signal of the chip which is using PF10 return to GPIO mode
- */
- p0.h = hi(PORTF_FER);
- p0.l = lo(PORTF_FER);
- r0.l = 0x0000;
- w[p0] = r0.l;
- SSYNC;
-
- /* /CS return to high */
- p0.h = hi(PORTFIO);
- p0.l = lo(PORTFIO);
- r0.l = 0xFFFF;
- w[p0] = r0.l;
- SSYNC;
-
- /* Delay some time, This is necessary */
- r1.h = 0;
- r1.l = 0x400;
- p1 = r1;
- lsetup (.L_delay_lab1, .L_delay_lab1_end) lc1 = p1;
-.L_delay_lab1:
- r0.h = 0;
- r0.l = 0x8000;
- p0 = r0;
- lsetup (.L_delay_lab0, .L_delay_lab0_end) lc0 = p0;
-.L_delay_lab0:
- nop;
-.L_delay_lab0_end:
- nop;
-.L_delay_lab1_end:
- nop;
-#endif
-
- /* Clear the IMASK register */
- p0.h = hi(IMASK);
- p0.l = lo(IMASK);
- r0 = 0x0;
- [p0] = r0;
-
- /* Clear the ILAT register */
- p0.h = hi(ILAT);
- p0.l = lo(ILAT);
- r0 = [p0];
- [p0] = r0;
- SSYNC;
-
- /* make sure SYSCR is set to use BMODE */
- P0.h = hi(SYSCR);
- P0.l = lo(SYSCR);
- R0.l = 0x0;
- W[P0] = R0.l;
- SSYNC;
-
- /* issue a system soft reset */
- P1.h = hi(SWRST);
- P1.l = lo(SWRST);
- R1.l = 0x0007;
- W[P1] = R1;
- SSYNC;
-
- /* clear system soft reset */
- R0.l = 0x0000;
- W[P0] = R0;
- SSYNC;
-
- /* issue core reset */
- raise 1;
-
- RTS;
-ENDPROC(_bfin_reset)
-
.data
/*
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
index e78b03d56c7..08d8dc83701 100644
--- a/arch/blackfin/mach-bf548/Kconfig
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -2,6 +2,13 @@ if (BF54x)
menu "BF548 Specific Configuration"
+config DEB_DMA_URGENT
+ bool "DMA has priority over core for ext. accesses"
+ depends on BF54x
+ default n
+ help
+ Treat any DEB1, DEB2 and DEB3 request as Urgent
+
comment "Interrupt Priority Assignment"
menu "Priority"
@@ -282,7 +289,7 @@ menu "Assignment"
config PINTx_REASSIGN
bool "Reprogram PINT Assignment"
- default n
+ default y
help
The interrupt assignment registers controls the pin-to-interrupt
assignment in a byte-wide manner. Each option allows you to select
@@ -303,7 +310,7 @@ config PINT1_ASSIGN
config PINT2_ASSIGN
hex "PINT2_ASSIGN"
depends on PINTx_REASSIGN
- default 0x00000101
+ default 0x07000101
config PINT3_ASSIGN
hex "PINT3_ASSIGN"
depends on PINTx_REASSIGN
diff --git a/arch/blackfin/mach-bf548/Makefile b/arch/blackfin/mach-bf548/Makefile
index 060ad78ebf1..7e7c9c8ac5b 100644
--- a/arch/blackfin/mach-bf548/Makefile
+++ b/arch/blackfin/mach-bf548/Makefile
@@ -4,6 +4,6 @@
extra-y := head.o
-obj-y := ints-priority.o dma.o gpio.o
+obj-y := ints-priority.o dma.o
obj-$(CONFIG_CPU_FREQ) += cpu.o
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 96ad95fab1a..2c47db494f7 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -35,9 +35,16 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/irq.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/cplb.h>
+#include <asm/dma.h>
+#include <asm/gpio.h>
+#include <asm/nand.h>
+#include <asm/mach/bf54x_keys.h>
+#include <linux/input.h>
+#include <linux/spi/ad7877.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -48,6 +55,88 @@ char *bfin_board_name = "ADSP-BF548-EZKIT";
* Driver needs to know address, irq and flag pin.
*/
+#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+
+#include <asm/mach/bf54x-lq043.h>
+
+static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
+ .width = 480,
+ .height = 272,
+ .xres = {480, 480, 480},
+ .yres = {272, 272, 272},
+ .bpp = {24, 24, 24},
+ .disp = GPIO_PE3,
+};
+
+static struct resource bf54x_lq043_resources[] = {
+ {
+ .start = IRQ_EPPI0_ERR,
+ .end = IRQ_EPPI0_ERR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bf54x_lq043_device = {
+ .name = "bf54x-lq043",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bf54x_lq043_resources),
+ .resource = bf54x_lq043_resources,
+ .dev = {
+ .platform_data = &bf54x_lq043_data,
+ },
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+static int bf548_keymap[] = {
+ KEYVAL(0, 0, KEY_ENTER),
+ KEYVAL(0, 1, KEY_HELP),
+ KEYVAL(0, 2, KEY_0),
+ KEYVAL(0, 3, KEY_BACKSPACE),
+ KEYVAL(1, 0, KEY_TAB),
+ KEYVAL(1, 1, KEY_9),
+ KEYVAL(1, 2, KEY_8),
+ KEYVAL(1, 3, KEY_7),
+ KEYVAL(2, 0, KEY_DOWN),
+ KEYVAL(2, 1, KEY_6),
+ KEYVAL(2, 2, KEY_5),
+ KEYVAL(2, 3, KEY_4),
+ KEYVAL(3, 0, KEY_UP),
+ KEYVAL(3, 1, KEY_3),
+ KEYVAL(3, 2, KEY_2),
+ KEYVAL(3, 3, KEY_1),
+};
+
+static struct bfin_kpad_platform_data bf54x_kpad_data = {
+ .rows = 4,
+ .cols = 4,
+ .keymap = bf548_keymap,
+ .keymapsize = ARRAY_SIZE(bf548_keymap),
+ .repeat = 0,
+ .debounce_time = 5000, /* ns (5ms) */
+ .coldrive_time = 1000, /* ns (1ms) */
+ .keyup_test_interval = 50, /* ms (50ms) */
+};
+
+static struct resource bf54x_kpad_resources[] = {
+ {
+ .start = IRQ_KEY,
+ .end = IRQ_KEY,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bf54x_kpad_device = {
+ .name = "bf54x-keys",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bf54x_kpad_resources),
+ .resource = bf54x_kpad_resources,
+ .dev = {
+ .platform_data = &bf54x_kpad_data,
+ },
+};
+#endif
+
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
@@ -94,6 +183,344 @@ static struct platform_device bfin_uart_device = {
};
#endif
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct resource smsc911x_resources[] = {
+ {
+ .name = "smsc911x-memory",
+ .start = 0x24000000,
+ .end = 0x24000000 + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PE8,
+ .end = IRQ_PE8,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE)
+static struct resource bf54x_hcd_resources[] = {
+ {
+ .start = 0xFFC03C00,
+ .end = 0xFFC040FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bf54x_hcd = {
+ .name = "bf54x-hcd",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bf54x_hcd_resources),
+ .resource = bf54x_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+ [0] = {
+ .start = 0xFFC03C00,
+ .end = 0xFFC040FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* general IRQ */
+ .start = IRQ_USB_INT0,
+ .end = IRQ_USB_INT0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+ [2] = { /* DMA IRQ */
+ .start = IRQ_USB_DMA,
+ .end = IRQ_USB_DMA,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#ifdef CONFIG_USB_MUSB_OTG
+ .mode = MUSB_OTG,
+#elif CONFIG_USB_MUSB_HDRC_HCD
+ .mode = MUSB_HOST,
+#elif CONFIG_USB_GADGET_MUSB_HDRC
+ .mode = MUSB_PERIPHERAL,
+#endif
+ .multipoint = 1,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+ .name = "musb_hdrc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &musb_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &musb_plat,
+ },
+ .num_resources = ARRAY_SIZE(musb_resources),
+ .resource = musb_resources,
+};
+#endif
+
+#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+static struct resource bfin_atapi_resources[] = {
+ {
+ .start = 0xFFC03800,
+ .end = 0xFFC0386F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ATAPI_ERR,
+ .end = IRQ_ATAPI_ERR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_atapi_device = {
+ .name = "pata-bf54x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_atapi_resources),
+ .resource = bfin_atapi_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+ {
+ .name = "Linux Kernel",
+ .offset = 0,
+ .size = 4 * SIZE_1M,
+ },
+ {
+ .name = "File System",
+ .offset = 4 * SIZE_1M,
+ .size = (256 - 4) * SIZE_1M,
+ },
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+ .page_size = NFC_PG_SIZE_256,
+ .data_width = NFC_NWIDTH_8,
+ .partitions = partition_info,
+ .nr_partitions = ARRAY_SIZE(partition_info),
+ .rd_dly = 3,
+ .wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+ {
+ .start = 0xFFC03B00,
+ .end = 0xFFC03B4F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = CH_NFC,
+ .end = CH_NFC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bf5xx_nand_device = {
+ .name = "bf5xx-nand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+ .resource = bf5xx_nand_resources,
+ .dev = {
+ .platform_data = &bf5xx_nand_platform,
+ },
+};
+#endif
+
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+static struct platform_device bf54x_sdh_device = {
+ .name = "bfin-sdh",
+ .id = 0,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+/* SPI flash chip (m25p16) */
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "linux kernel",
+ .size = 0x1c0000,
+ .offset = 0x40000
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p16",
+};
+
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+ .cs_change_per_word = 0,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+ .cs_change_per_word = 1,
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+ .model = 7877,
+ .vref_delay_usecs = 50, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .pressure_max = 1000,
+ .pressure_min = 0,
+ .stopacq_polarity = 1,
+ .first_conversion_delay = 3,
+ .acquisition_time = 1,
+ .averaging = 1,
+ .pen_down_acc_interval = 1,
+};
+#endif
+
+static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* SPI_SSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+{
+ .modalias = "ad7877",
+ .platform_data = &bfin_ad7877_ts_info,
+ .irq = IRQ_PJ11,
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 2,
+ .controller_data = &spi_ad7877_chip_info,
+},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI0,
+ .end = CH_SPI0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* SPI (1) */
+static struct resource bfin_spi1_resource[] = {
+ [0] = {
+ .start = SPI1_REGBASE,
+ .end = SPI1_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI1,
+ .end = CH_SPI1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bf54x_spi_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device bf54x_spi_master0 = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+ },
+};
+
+static struct platform_device bf54x_spi_master1 = {
+ .name = "bfin-spi",
+ .id = 1, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi1_resource),
+ .resource = bfin_spi1_resource,
+ .dev = {
+ .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+ [0] = {
+ .start = TWI0_REGBASE,
+ .end = TWI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI0,
+ .end = IRQ_TWI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c_bfin_twi0_device = {
+ .name = "i2c-bfin-twi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+ .resource = bfin_twi0_resource,
+};
+
+static struct resource bfin_twi1_resource[] = {
+ [0] = {
+ .start = TWI1_REGBASE,
+ .end = TWI1_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI1,
+ .end = IRQ_TWI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c_bfin_twi1_device = {
+ .name = "i2c-bfin-twi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_twi1_resource),
+ .resource = bfin_twi1_resource,
+};
+#endif
+
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
@@ -102,12 +529,60 @@ static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
+
+#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+ &bf54x_lq043_device,
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+ &smsc911x_device,
+#endif
+
+#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE)
+ &bf54x_hcd,
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+ &musb_device,
+#endif
+
+#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+ &bfin_atapi_device,
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+ &bf5xx_nand_device,
+#endif
+
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+ &bf54x_sdh_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bf54x_spi_master0,
+/* &bf54x_spi_master1,*/
+#endif
+
+#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+ &bf54x_kpad_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+ &i2c_bfin_twi0_device,
+ &i2c_bfin_twi1_device,
+#endif
};
static int __init stamp_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bf54x_spi_board_info,
+ ARRAY_SIZE(bf54x_spi_board_info));
+#endif
+
return 0;
}
diff --git a/arch/blackfin/mach-bf548/gpio.c b/arch/blackfin/mach-bf548/gpio.c
deleted file mode 100644
index 0da5f0003b8..00000000000
--- a/arch/blackfin/mach-bf548/gpio.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * File: arch/blackfin/mach-bf548/gpio.c
- * Based on:
- * Author: Michael Hennerich (hennerich@blackfin.uclinux.org)
- *
- * Created:
- * Description: GPIO Abstraction Layer
- *
- * Modified:
- * Copyright 2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/module.h>
-#include <linux/err.h>
-#include <asm/blackfin.h>
-#include <asm/gpio.h>
-#include <asm/portmux.h>
-#include <linux/irq.h>
-
-static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
- (struct gpio_port_t *)PORTA_FER,
- (struct gpio_port_t *)PORTB_FER,
- (struct gpio_port_t *)PORTC_FER,
- (struct gpio_port_t *)PORTD_FER,
- (struct gpio_port_t *)PORTE_FER,
- (struct gpio_port_t *)PORTF_FER,
- (struct gpio_port_t *)PORTG_FER,
- (struct gpio_port_t *)PORTH_FER,
- (struct gpio_port_t *)PORTI_FER,
- (struct gpio_port_t *)PORTJ_FER,
-};
-
-static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
-static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
-
-inline int check_gpio(unsigned short gpio)
-{
- if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
- || gpio == GPIO_PH14 || gpio == GPIO_PH15
- || gpio == GPIO_PJ14 || gpio == GPIO_PJ15
- || gpio > MAX_BLACKFIN_GPIOS)
- return -EINVAL;
- return 0;
-}
-
-inline void portmux_setup(unsigned short portno, unsigned short function)
-{
- u32 pmux;
-
- pmux = gpio_array[gpio_bank(portno)]->port_mux;
-
- pmux &= ~(0x3 << (2 * gpio_sub_n(portno)));
- pmux |= (function & 0x3) << (2 * gpio_sub_n(portno));
-
- gpio_array[gpio_bank(portno)]->port_mux = pmux;
-
-}
-
-inline u16 get_portmux(unsigned short portno)
-{
- u32 pmux;
-
- pmux = gpio_array[gpio_bank(portno)]->port_mux;
-
- return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
-
-}
-
-static void port_setup(unsigned short gpio, unsigned short usage)
-{
- if (usage == GPIO_USAGE) {
- if (gpio_array[gpio_bank(gpio)]->port_fer & gpio_bit(gpio))
- printk(KERN_WARNING
- "bfin-gpio: Possible Conflict with Peripheral "
- "usage and GPIO %d detected!\n", gpio);
- gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
- } else
- gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
- SSYNC();
-}
-
-static int __init bfin_gpio_init(void)
-{
- printk(KERN_INFO "Blackfin GPIO Controller\n");
-
- return 0;
-}
-
-arch_initcall(bfin_gpio_init);
-
-int peripheral_request(unsigned short per, const char *label)
-{
- unsigned long flags;
- unsigned short ident = P_IDENT(per);
-
- if (!(per & P_DEFINED))
- return -ENODEV;
-
- if (check_gpio(ident) < 0)
- return -EINVAL;
-
- local_irq_save(flags);
-
- if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
- printk(KERN_ERR
- "%s: Peripheral %d is already reserved as GPIO!\n",
- __FUNCTION__, per);
- dump_stack();
- local_irq_restore(flags);
- return -EBUSY;
- }
-
- if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) {
-
- u16 funct = get_portmux(ident);
-
- if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) {
- printk(KERN_ERR
- "%s: Peripheral %d is already reserved!\n",
- __FUNCTION__, per);
- dump_stack();
- local_irq_restore(flags);
- return -EBUSY;
- }
- }
-
- reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
-
- portmux_setup(ident, P_FUNCT2MUX(per));
- port_setup(ident, PERIPHERAL_USAGE);
-
- local_irq_restore(flags);
-
- return 0;
-}
-EXPORT_SYMBOL(peripheral_request);
-
-int peripheral_request_list(unsigned short per[], const char *label)
-{
-
- u16 cnt;
- int ret;
-
- for (cnt = 0; per[cnt] != 0; cnt++) {
- ret = peripheral_request(per[cnt], label);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(peripheral_request_list);
-
-void peripheral_free(unsigned short per)
-{
- unsigned long flags;
- unsigned short ident = P_IDENT(per);
-
- if (!(per & P_DEFINED))
- return;
-
- if (check_gpio(ident) < 0)
- return;
-
- local_irq_save(flags);
-
- if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) {
- printk(KERN_ERR "bfin-gpio: Peripheral %d wasn't reserved!\n", per);
- dump_stack();
- local_irq_restore(flags);
- return;
- }
-
- if (!(per & P_MAYSHARE)) {
- port_setup(ident, GPIO_USAGE);
- }
-
- reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident);
-
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(peripheral_free);
-
-void peripheral_free_list(unsigned short per[])
-{
- u16 cnt;
-
- for (cnt = 0; per[cnt] != 0; cnt++) {
- peripheral_free(per[cnt]);
- }
-
-}
-EXPORT_SYMBOL(peripheral_free_list);
-
-/***********************************************************
-*
-* FUNCTIONS: Blackfin GPIO Driver
-*
-* INPUTS/OUTPUTS:
-* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
-*
-*
-* DESCRIPTION: Blackfin GPIO Driver API
-*
-* CAUTION:
-*************************************************************
-* MODIFICATION HISTORY :
-**************************************************************/
-
-int gpio_request(unsigned short gpio, const char *label)
-{
- unsigned long flags;
-
- if (check_gpio(gpio) < 0)
- return -EINVAL;
-
- local_irq_save(flags);
-
- if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
- dump_stack();
- local_irq_restore(flags);
- return -EBUSY;
- }
-
- if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- printk(KERN_ERR
- "bfin-gpio: GPIO %d is already reserved as Peripheral!\n", gpio);
- dump_stack();
- local_irq_restore(flags);
- return -EBUSY;
- }
-
- reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
-
- local_irq_restore(flags);
-
- port_setup(gpio, GPIO_USAGE);
-
- return 0;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned short gpio)
-{
- unsigned long flags;
-
- if (check_gpio(gpio) < 0)
- return;
-
- local_irq_save(flags);
-
- if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
- printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
- dump_stack();
- local_irq_restore(flags);
- return;
- }
-
- reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
-
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_free);
-
-void gpio_direction_input(unsigned short gpio)
-{
- unsigned long flags;
-
- BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
-
- local_irq_save(flags);
- gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
- gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-void gpio_direction_output(unsigned short gpio)
-{
- unsigned long flags;
-
- BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
-
- local_irq_save(flags);
- gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
- gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-void gpio_set_value(unsigned short gpio, unsigned short arg)
-{
- if (arg)
- gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio);
- else
- gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio);
-
-}
-EXPORT_SYMBOL(gpio_set_value);
-
-unsigned short gpio_get_value(unsigned short gpio)
-{
- return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio)));
-}
-EXPORT_SYMBOL(gpio_get_value);
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 06751ae8b85..3071c243d42 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -31,6 +31,7 @@
#include <asm/blackfin.h>
#include <asm/trace.h>
#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
@@ -49,9 +50,13 @@ ENTRY(__start)
ENTRY(__stext)
/* R0: argument of command line string, passed from uboot, save it */
R7 = R0;
- /* Set the SYSCFG register */
- R0 = 0x36;
- SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+ /* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+ R0 = SYSCFG_SNEN;
+#else
+ R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
+ SYSCFG = R0;
R0 = 0;
/* Clear Out All the data and pointer Registers*/
@@ -92,13 +97,13 @@ ENTRY(__stext)
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
@@ -106,8 +111,8 @@ ENTRY(__stext)
SSYNC;
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
@@ -120,6 +125,12 @@ ENTRY(__stext)
FP = SP;
USP = SP;
+#ifdef CONFIG_EARLY_PRINTK
+ SP += -12;
+ call _init_early_exception_vectors;
+ SP += 12;
+#endif
+
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bf53x_relocate_l1_mem;
#if CONFIG_BFIN_KERNEL_CLOCK
@@ -172,7 +183,7 @@ ENTRY(__stext)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined (ANOMALY_05000281)
+#if ANOMALY_05000281
nop;
nop;
nop;
@@ -335,8 +346,8 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
@@ -373,129 +384,6 @@ ENTRY(_start_dma_code)
RTS;
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-ENTRY(_bfin_reset)
- /* No more interrupts to be handled*/
- CLI R6;
- SSYNC;
-
-#if defined(CONFIG_MTD_M25P80)
-/*
- * The following code fix the SPI flash reboot issue,
- * /CS signal of the chip which is using PF10 return to GPIO mode
- */
- p0.h = hi(PORTF_FER);
- p0.l = lo(PORTF_FER);
- r0.l = 0x0000;
- w[p0] = r0.l;
- SSYNC;
-
-/* /CS return to high */
- p0.h = hi(PORTFIO);
- p0.l = lo(PORTFIO);
- r0.l = 0xFFFF;
- w[p0] = r0.l;
- SSYNC;
-
-/* Delay some time, This is necessary */
- r1.h = 0;
- r1.l = 0x400;
- p1 = r1;
- lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1;
-_delay_lab1:
- r0.h = 0;
- r0.l = 0x8000;
- p0 = r0;
- lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0;
-_delay_lab0:
- nop;
-_delay_lab0_end:
- nop;
-_delay_lab1_end:
- nop;
-#endif
-
- /* Clear the bits 13-15 in SWRST if they werent cleared */
- p0.h = hi(SWRST);
- p0.l = lo(SWRST);
- csync;
- r0.l = w[p0];
-
- /* Clear the IMASK register */
- p0.h = hi(IMASK);
- p0.l = lo(IMASK);
- r0 = 0x0;
- [p0] = r0;
-
- /* Clear the ILAT register */
- p0.h = hi(ILAT);
- p0.l = lo(ILAT);
- r0 = [p0];
- [p0] = r0;
- SSYNC;
-
- /* Disable the WDOG TIMER */
- p0.h = hi(WDOG_CTL);
- p0.l = lo(WDOG_CTL);
- r0.l = 0xAD6;
- w[p0] = r0.l;
- SSYNC;
-
- /* Clear the sticky bit incase it is already set */
- p0.h = hi(WDOG_CTL);
- p0.l = lo(WDOG_CTL);
- r0.l = 0x8AD6;
- w[p0] = r0.l;
- SSYNC;
-
- /* Program the count value */
- R0.l = 0x100;
- R0.h = 0x0;
- P0.h = hi(WDOG_CNT);
- P0.l = lo(WDOG_CNT);
- [P0] = R0;
- SSYNC;
-
- /* Program WDOG_STAT if necessary */
- P0.h = hi(WDOG_CTL);
- P0.l = lo(WDOG_CTL);
- R0 = W[P0](Z);
- CC = BITTST(R0,1);
- if !CC JUMP .LWRITESTAT;
- CC = BITTST(R0,2);
- if !CC JUMP .LWRITESTAT;
- JUMP .LSKIP_WRITE;
-
-.LWRITESTAT:
- /* When watch dog timer is enabled,
- * a write to STAT will load the contents of CNT to STAT
- */
- R0 = 0x0000(z);
- P0.h = hi(WDOG_STAT);
- P0.l = lo(WDOG_STAT)
- [P0] = R0;
- SSYNC;
-
-.LSKIP_WRITE:
- /* Enable the reset event */
- P0.h = hi(WDOG_CTL);
- P0.l = lo(WDOG_CTL);
- R0 = W[P0](Z);
- BITCLR(R0,1);
- BITCLR(R0,2);
- W[P0] = R0.L;
- SSYNC;
- NOP;
-
- /* Enable the wdog counter */
- R0 = W[P0](Z);
- BITCLR(R0,4);
- W[P0] = R0.L;
- SSYNC;
-
- IDLE;
-
- RTS;
-
.data
/*
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 5b2b544529a..cd827a1b6ba 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -34,7 +34,9 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
+#include <linux/pata_platform.h>
#include <linux/irq.h>
+#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
/*
@@ -112,7 +114,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -124,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -135,7 +137,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
@@ -144,7 +146,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
@@ -153,7 +155,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -162,17 +164,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
@@ -256,6 +274,43 @@ static struct platform_device bfin_uart_device = {
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 119
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 2,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x2400C000,
+ .end = 0x2400C001F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2400D018,
+ .end = 0x2400D01B,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *cm_bf561_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
@@ -271,9 +326,12 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
};
static int __init cm_bf561_init(void)
@@ -283,6 +341,10 @@ static int __init cm_bf561_init(void)
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
return 0;
}
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 724191da20a..57e14edca8b 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -32,6 +32,8 @@
#include <linux/spi/spi.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/pata_platform.h>
+#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
/*
@@ -140,17 +142,33 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
#endif
#endif
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
@@ -160,23 +178,63 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
#endif
};
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 1,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x20314020,
+ .end = 0x2031403F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2031401C,
+ .end = 0x2031401F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
};
static int __init ezkit_init(void)
@@ -194,7 +252,15 @@ static int __init ezkit_init(void)
SSYNC();
#endif
- return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+ return 0;
}
arch_initcall(ezkit_init);
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 38650a62898..96a3d456fb6 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -33,6 +33,7 @@
#include <asm/trace.h>
#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
@@ -50,10 +51,12 @@ __INIT
ENTRY(__start)
/* R0: argument of command line string, passed from uboot, save it */
R7 = R0;
- /* Set the SYSCFG register:
- * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit)
- */
- R0 = 0x36;
+ /* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+ R0 = SYSCFG_SNEN;
+#else
+ R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
SYSCFG = R0;
R0 = 0;
@@ -95,43 +98,42 @@ ENTRY(__start)
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
- /* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -167,6 +169,12 @@ ENTRY(__start)
fp = sp;
usp = sp;
+#ifdef CONFIG_EARLY_PRINTK
+ SP += -12;
+ call _init_early_exception_vectors;
+ SP += 12;
+#endif
+
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bf53x_relocate_l1_mem;
#if CONFIG_BFIN_KERNEL_CLOCK
@@ -220,7 +228,7 @@ ENTRY(__start)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
@@ -372,8 +380,8 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
@@ -404,66 +412,6 @@ ENTRY(_start_dma_code)
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-ENTRY(_bfin_reset)
- /* No more interrupts to be handled*/
- CLI R6;
- SSYNC;
-
-#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
- p0.h = hi(FIO_INEN);
- p0.l = lo(FIO_INEN);
- r0.l = ~(PF1 | PF0);
- w[p0] = r0.l;
-
- p0.h = hi(FIO_DIR);
- p0.l = lo(FIO_DIR);
- r0.l = (PF1 | PF0);
- w[p0] = r0.l;
-
- p0.h = hi(FIO_FLAG_C);
- p0.l = lo(FIO_FLAG_C);
- r0.l = (PF1 | PF0);
- w[p0] = r0.l;
-#endif
-
- /* Clear the IMASK register */
- p0.h = hi(IMASK);
- p0.l = lo(IMASK);
- r0 = 0x0;
- [p0] = r0;
-
- /* Clear the ILAT register */
- p0.h = hi(ILAT);
- p0.l = lo(ILAT);
- r0 = [p0];
- [p0] = r0;
- SSYNC;
-
- /* make sure SYSCR is set to use BMODE */
- P0.h = hi(SYSCR);
- P0.l = lo(SYSCR);
- R0.l = 0x20; /* on BF561, disable core b */
- W[P0] = R0.l;
- SSYNC;
-
- /* issue a system soft reset */
- P1.h = hi(SWRST);
- P1.l = lo(SWRST);
- R1.l = 0x0007;
- W[P1] = R1;
- SSYNC;
-
- /* clear system soft reset */
- R0.l = 0x0000;
- W[P0] = R0;
- SSYNC;
-
- /* issue core reset */
- raise 1;
-
- RTS;
-ENDPROC(_bfin_reset)
-
.data
/*
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 0279ede7039..4d7733dfd5d 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -4,7 +4,7 @@
obj-y := \
cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \
- interrupt.o lock.o irqpanic.o
+ interrupt.o lock.o irqpanic.o arch_checks.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
new file mode 100644
index 00000000000..2f6ce397780
--- /dev/null
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -0,0 +1,60 @@
+/*
+ * File: arch/blackfin/mach-common/arch_checks.c
+ * Based on:
+ * Author: Robin Getz <rgetz@blackfin.uclinux.org>
+ *
+ * Created: 25Jul07
+ * Description: Do some checking to make sure things are OK
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <asm/mach/anomaly.h>
+#include <asm/mach-common/clocks.h>
+
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+
+# if (CONFIG_VCO_HZ > CONFIG_MAX_VCO_HZ)
+# error "VCO selected is more than maximum value. Please change the VCO multipler"
+# endif
+
+# if (CONFIG_SCLK_HZ > CONFIG_MAX_SCLK_HZ)
+# error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
+# endif
+
+# if (CONFIG_SCLK_HZ < CONFIG_MIN_SCLK_HZ)
+# error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
+# endif
+
+# if (ANOMALY_05000273) && (CONFIG_SCLK_HZ * 2 > CONFIG_CCLK_HZ)
+# error "ANOMALY 05000273, please make sure CCLK is at least 2x SCLK"
+# endif
+
+# if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) && (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) && (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
+# error "Please select sclk less than cclk"
+# endif
+
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+#if (CONFIG_MEM_SIZE % 4)
+#error "SDRAM mem size must be multible of 4MB"
+#endif
+
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 7063795eb7c..0521b158820 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -79,8 +79,8 @@ ENTRY(_icache_invalidate)
ENTRY(_invalidate_entire_icache)
[--SP] = ( R7:5);
- P0.L = (IMEM_CONTROL & 0xFFFF);
- P0.H = (IMEM_CONTROL >> 16);
+ P0.L = LO(IMEM_CONTROL);
+ P0.H = HI(IMEM_CONTROL);
R7 = [P0];
/* Clear the IMC bit , All valid bits in the instruction
@@ -197,8 +197,8 @@ ENTRY(_invalidate_entire_dcache)
ENTRY(_dcache_invalidate)
[--SP] = ( R7:6);
- P0.L = (DMEM_CONTROL & 0xFFFF);
- P0.H = (DMEM_CONTROL >> 16);
+ P0.L = LO(DMEM_CONTROL);
+ P0.H = HI(DMEM_CONTROL);
R7 = [P0];
/* Clear the DMC[1:0] bits, All valid bits in the data
diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S
index 5be6b975ae4..22fada0c1cb 100644
--- a/arch/blackfin/mach-common/cacheinit.S
+++ b/arch/blackfin/mach-common/cacheinit.S
@@ -38,13 +38,13 @@
.text
-#ifdef ANOMALY_05000125
-#if defined(CONFIG_BLKFIN_CACHE)
+#if ANOMALY_05000125
+#if defined(CONFIG_BFIN_ICACHE)
ENTRY(_bfin_write_IMEM_CONTROL)
/* Enable Instruction Cache */
- P0.l = (IMEM_CONTROL & 0xFFFF);
- P0.h = (IMEM_CONTROL >> 16);
+ P0.l = LO(IMEM_CONTROL);
+ P0.h = HI(IMEM_CONTROL);
/* Anomaly 05000125 */
CLI R1;
@@ -58,10 +58,10 @@ ENTRY(_bfin_write_IMEM_CONTROL)
ENDPROC(_bfin_write_IMEM_CONTROL)
#endif
-#if defined(CONFIG_BLKFIN_DCACHE)
+#if defined(CONFIG_BFIN_DCACHE)
ENTRY(_bfin_write_DMEM_CONTROL)
- P0.l = (DMEM_CONTROL & 0xFFFF);
- P0.h = (DMEM_CONTROL >> 16);
+ P0.l = LO(DMEM_CONTROL);
+ P0.h = HI(DMEM_CONTROL);
CLI R1;
SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
diff --git a/arch/blackfin/mach-common/cplbhdlr.S b/arch/blackfin/mach-common/cplbhdlr.S
index 2f3c72c2399..2788532de72 100644
--- a/arch/blackfin/mach-common/cplbhdlr.S
+++ b/arch/blackfin/mach-common/cplbhdlr.S
@@ -69,14 +69,14 @@ ENTRY(__cplb_hdr)
.Lis_icplb_miss:
-#if defined(CONFIG_BLKFIN_CACHE) || defined(CONFIG_BLKFIN_DCACHE)
-# if defined(CONFIG_BLKFIN_CACHE) && !defined(CONFIG_BLKFIN_DCACHE)
+#if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE)
+# if defined(CONFIG_BFIN_ICACHE) && !defined(CONFIG_BFIN_DCACHE)
R1 = CPLB_ENABLE_ICACHE;
# endif
-# if !defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE)
+# if !defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE)
R1 = CPLB_ENABLE_DCACHE;
# endif
-# if defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE)
+# if defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE)
R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE;
# endif
#else
diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S
index e4b47e09cf1..946703ef48f 100644
--- a/arch/blackfin/mach-common/cplbmgr.S
+++ b/arch/blackfin/mach-common/cplbmgr.S
@@ -75,15 +75,15 @@ ENTRY(_cplb_mgr)
* from the configuration table.
*/
- P4.L = (ICPLB_FAULT_ADDR & 0xFFFF);
- P4.H = (ICPLB_FAULT_ADDR >> 16);
+ P4.L = LO(ICPLB_FAULT_ADDR);
+ P4.H = HI(ICPLB_FAULT_ADDR);
P1 = 16;
P5.L = _page_size_table;
P5.H = _page_size_table;
- P0.L = (ICPLB_DATA0 & 0xFFFF);
- P0.H = (ICPLB_DATA0 >> 16);
+ P0.L = LO(ICPLB_DATA0);
+ P0.H = HI(ICPLB_DATA0);
R4 = [P4]; /* Get faulting address*/
R6 = 64; /* Advance past the fault address, which*/
R6 = R6 + R4; /* we'll use if we find a match*/
@@ -117,13 +117,13 @@ ENTRY(_cplb_mgr)
I0 = R4; /* Fault address we'll search for*/
/* set up pointers */
- P0.L = (ICPLB_DATA0 & 0xFFFF);
- P0.H = (ICPLB_DATA0 >> 16);
+ P0.L = LO(ICPLB_DATA0);
+ P0.H = HI(ICPLB_DATA0);
/* The replacement procedure for ICPLBs */
- P4.L = (IMEM_CONTROL & 0xFFFF);
- P4.H = (IMEM_CONTROL >> 16);
+ P4.L = LO(IMEM_CONTROL);
+ P4.H = HI(IMEM_CONTROL);
/* disable cplbs */
R5 = [P4]; /* Control Register*/
@@ -243,8 +243,8 @@ ENTRY(_cplb_mgr)
* last entry of the table.
*/
- P1.L = (ICPLB_DATA15 & 0xFFFF); /* ICPLB_DATA15 */
- P1.H = (ICPLB_DATA15 >> 16);
+ P1.L = LO(ICPLB_DATA15); /* ICPLB_DATA15 */
+ P1.H = HI(ICPLB_DATA15);
[P1] = R2;
[P1-0x100] = R4;
#ifdef CONFIG_CPLB_INFO
@@ -292,10 +292,10 @@ ENTRY(_cplb_mgr)
* pending writes associated with the CPLB.
*/
- P4.L = (DCPLB_STATUS & 0xFFFF);
- P4.H = (DCPLB_STATUS >> 16);
- P3.L = (DCPLB_DATA0 & 0xFFFF);
- P3.H = (DCPLB_DATA0 >> 16);
+ P4.L = LO(DCPLB_STATUS);
+ P4.H = HI(DCPLB_STATUS);
+ P3.L = LO(DCPLB_DATA0);
+ P3.H = HI(DCPLB_DATA0);
R5 = [P4];
/* A protection violation can be caused by more than just writes
@@ -355,11 +355,11 @@ ENTRY(_cplb_mgr)
* config table, that covers the faulting address.
*/
- P1.L = (DCPLB_DATA15 & 0xFFFF);
- P1.H = (DCPLB_DATA15 >> 16);
+ P1.L = LO(DCPLB_DATA15);
+ P1.H = HI(DCPLB_DATA15);
- P4.L = (DCPLB_FAULT_ADDR & 0xFFFF);
- P4.H = (DCPLB_FAULT_ADDR >> 16);
+ P4.L = LO(DCPLB_FAULT_ADDR);
+ P4.H = HI(DCPLB_FAULT_ADDR);
R4 = [P4];
I0 = R4;
@@ -368,8 +368,8 @@ ENTRY(_cplb_mgr)
R6 = R1; /* Save for later*/
/* Turn off CPLBs while we work.*/
- P4.L = (DMEM_CONTROL & 0xFFFF);
- P4.H = (DMEM_CONTROL >> 16);
+ P4.L = LO(DMEM_CONTROL);
+ P4.H = HI(DMEM_CONTROL);
R5 = [P4];
BITCLR(R5,ENDCPLB_P);
CLI R0;
@@ -384,8 +384,8 @@ ENTRY(_cplb_mgr)
* are no good.
*/
- I1.L = (DCPLB_DATA0 & 0xFFFF);
- I1.H = (DCPLB_DATA0 >> 16);
+ I1.L = LO(DCPLB_DATA0);
+ I1.H = HI(DCPLB_DATA0);
P1 = 2;
P2 = 16;
I2.L = _dcplb_preference;
@@ -405,7 +405,7 @@ ENTRY(_cplb_mgr)
P3.L = _page_size_table; /* retrieve end address */
P3.H = _page_size_table; /* retrieve end address */
R3 = 0x1002; /* 16th - position, 2 bits -length */
-#ifdef ANOMALY_05000209
+#if ANOMALY_05000209
nop; /* Anomaly 05000209 */
#endif
R7 = EXTRACT(R1,R3.l);
@@ -475,8 +475,8 @@ ENTRY(_cplb_mgr)
* one space closer to the start.
*/
- R1.L = (DCPLB_DATA16 & 0xFFFF); /* DCPLB_DATA15 + 4 */
- R1.H = (DCPLB_DATA16 >> 16);
+ R1.L = LO(DCPLB_DATA16); /* DCPLB_DATA15 + 4 */
+ R1.H = HI(DCPLB_DATA16);
R0 = P0;
/* If the victim happens to be in DCPLB15,
@@ -549,8 +549,8 @@ ENTRY(_cplb_mgr)
* if necessary.
*/
- P1.L = (DCPLB_DATA15 & 0xFFFF);
- P1.H = (DCPLB_DATA15 >> 16);
+ P1.L = LO(DCPLB_DATA15);
+ P1.H = HI(DCPLB_DATA15);
/* If the DCPLB has cache bits set, but caching hasn't
* been enabled, then we want to mask off the cache-in-L1
@@ -565,7 +565,7 @@ ENTRY(_cplb_mgr)
* cost of first-write exceptions to mark the page as dirty.
*/
-#ifdef CONFIG_BLKFIN_WT
+#ifdef CONFIG_BFIN_WT
BITSET(R6, 14); /* Set WT*/
#endif
diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S
index 97cdcd6a00d..39fbc286110 100644
--- a/arch/blackfin/mach-common/dpmc.S
+++ b/arch/blackfin/mach-common/dpmc.S
@@ -39,8 +39,8 @@ ENTRY(_unmask_wdog_wakeup_evt)
P0.H = hi(SICA_IWR1);
P0.L = lo(SICA_IWR1);
#else
- P0.h = (SIC_IWR >> 16);
- P0.l = (SIC_IWR & 0xFFFF);
+ P0.h = HI(SIC_IWR);
+ P0.l = LO(SIC_IWR);
#endif
R7 = [P0];
#if defined(CONFIG_BF561)
@@ -60,11 +60,11 @@ ENTRY(_unmask_wdog_wakeup_evt)
*/
R7 = 0x0000(z);
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_STAT >> 16);
- P0.l = (WDOGA_STAT & 0xFFFF);
+ P0.h = HI(WDOGA_STAT);
+ P0.l = LO(WDOGA_STAT);
#else
- P0.h = (WDOG_STAT >> 16);
- P0.l = (WDOG_STAT & 0xFFFF);
+ P0.h = HI(WDOG_STAT);
+ P0.l = LO(WDOG_STAT);
#endif
[P0] = R7;
SSYNC;
@@ -73,21 +73,21 @@ ENTRY(_unmask_wdog_wakeup_evt)
ENTRY(_program_wdog_timer)
[--SP] = ( R7:0, P5:0 );
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CNT >> 16);
- P0.l = (WDOGA_CNT & 0xFFFF);
+ P0.h = HI(WDOGA_CNT);
+ P0.l = LO(WDOGA_CNT);
#else
- P0.h = (WDOG_CNT >> 16);
- P0.l = (WDOG_CNT & 0xFFFF);
+ P0.h = HI(WDOG_CNT);
+ P0.l = LO(WDOG_CNT);
#endif
[P0] = R0;
SSYNC;
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CTL >> 16);
- P0.l = (WDOGA_CTL & 0xFFFF);
+ P0.h = HI(WDOGA_CTL);
+ P0.l = LO(WDOGA_CTL);
#else
- P0.h = (WDOG_CTL >> 16);
- P0.l = (WDOG_CTL & 0xFFFF);
+ P0.h = HI(WDOG_CTL);
+ P0.l = LO(WDOG_CTL);
#endif
R7 = W[P0](Z);
CC = BITTST(R7,1);
@@ -97,11 +97,11 @@ ENTRY(_program_wdog_timer)
.LSKIP_WRITE_TO_STAT:
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CTL >> 16);
- P0.l = (WDOGA_CTL & 0xFFFF);
+ P0.h = HI(WDOGA_CTL);
+ P0.l = LO(WDOGA_CTL);
#else
- P0.h = (WDOG_CTL >> 16);
- P0.l = (WDOG_CTL & 0xFFFF);
+ P0.h = HI(WDOG_CTL);
+ P0.l = LO(WDOG_CTL);
#endif
R7 = W[P0](Z);
BITCLR(R7,1); /* Enable GP event */
@@ -122,11 +122,11 @@ ENTRY(_clear_wdog_wakeup_evt)
[--SP] = ( R7:0, P5:0 );
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CTL >> 16);
- P0.l = (WDOGA_CTL & 0xFFFF);
+ P0.h = HI(WDOGA_CTL);
+ P0.l = LO(WDOGA_CTL);
#else
- P0.h = (WDOG_CTL >> 16);
- P0.l = (WDOG_CTL & 0xFFFF);
+ P0.h = HI(WDOG_CTL);
+ P0.l = LO(WDOG_CTL);
#endif
R7 = 0x0AD6(Z);
W[P0] = R7.L;
@@ -149,11 +149,11 @@ ENTRY(_clear_wdog_wakeup_evt)
ENTRY(_disable_wdog_timer)
[--SP] = ( R7:0, P5:0 );
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CTL >> 16);
- P0.l = (WDOGA_CTL & 0xFFFF);
+ P0.h = HI(WDOGA_CTL);
+ P0.l = LO(WDOGA_CTL);
#else
- P0.h = (WDOG_CTL >> 16);
- P0.l = (WDOG_CTL & 0xFFFF);
+ P0.h = HI(WDOG_CTL);
+ P0.l = LO(WDOG_CTL);
#endif
R7 = 0xAD6(Z);
W[P0] = R7.L;
@@ -300,7 +300,7 @@ ENTRY(_sleep_deeper)
P0.H = hi(PLL_CTL);
P0.L = lo(PLL_CTL);
R5 = W[P0](z);
- R0.L = (MIN_VC/CONFIG_CLKIN_HZ) << 9;
+ R0.L = (CONFIG_MIN_VCO_HZ/CONFIG_CLKIN_HZ) << 9;
W[P0] = R0.l;
SSYNC;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 96045880834..e3ad5802868 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -29,21 +29,7 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/*
- * 25-Dec-2004 - LG Soft India
- * 1. Fix in return_from_int, to make sure any pending
- * system call in ILAT for this process to get
- * executed, otherwise in case context switch happens,
- * system call of first process (i.e in ILAT) will be
- * carried forward to the switched process.
- * 2. Removed Constant references for the following
- * a. IPEND
- * b. EXCAUSE mask
- * c. PAGE Mask
- */
-
-/*
- * NOTE: This code handles signal-recognition, which happens every time
+/* NOTE: This code handles signal-recognition, which happens every time
* after a timer-interrupt and after each system call.
*/
@@ -58,6 +44,23 @@
#include <asm/mach-common/context.S>
+#if defined(CONFIG_BFIN_SCRATCH_REG_RETN)
+# define EX_SCRATCH_REG RETN
+#elif defined(CONFIG_BFIN_SCRATCH_REG_RETE)
+# define EX_SCRATCH_REG RETE
+#else
+# define EX_SCRATCH_REG CYCLES
+#endif
+
+#if ANOMALY_05000281
+ENTRY(_safe_speculative_execution)
+ NOP;
+ NOP;
+ NOP;
+ jump _safe_speculative_execution;
+ENDPROC(_safe_speculative_execution)
+#endif
+
#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
.section .l1.text
#else
@@ -69,7 +72,7 @@
* patch up CPLB misses on the kernel stack.
*/
ENTRY(_ex_dcplb)
-#if defined(ANOMALY_05000261)
+#if ANOMALY_05000261
/*
* Work around an anomaly: if we see a new DCPLB fault, return
* without doing anything. Then, if we get the same fault again,
@@ -93,7 +96,7 @@ ENTRY(_ex_icplb)
call __cplb_hdr;
DEBUG_START_HWTRACE(p5, r7)
RESTORE_ALL_SYS
- SP = RETN;
+ SP = EX_SCRATCH_REG;
rtx;
ENDPROC(_ex_icplb)
@@ -102,7 +105,7 @@ ENTRY(_ex_syscall)
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
raise 15; /* invoked by TRAP #0, for sys call */
- sp = retn;
+ sp = EX_SCRATCH_REG;
rtx
ENDPROC(_ex_syscall)
@@ -135,9 +138,9 @@ ENTRY(_ex_single_step)
cc = r6 == r7;
if !cc jump _ex_trap_c;
-_return_from_exception:
+ENTRY(_return_from_exception)
DEBUG_START_HWTRACE(p5, r7)
-#ifdef ANOMALY_05000257
+#if ANOMALY_05000257
R7=LC0;
LC0=R7;
R7=LC1;
@@ -145,7 +148,7 @@ _return_from_exception:
#endif
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
- sp = retn;
+ sp = EX_SCRATCH_REG;
rtx;
ENDPROC(_ex_soft_bp)
@@ -163,7 +166,17 @@ ENTRY(_handle_bad_cplb)
[--sp] = ASTAT;
[--sp] = (R7:6, P5:4);
+ENTRY(_ex_replaceable)
+ nop;
+
ENTRY(_ex_trap_c)
+ /* Make sure we are not in a double fault */
+ p4.l = lo(IPEND);
+ p4.h = hi(IPEND);
+ r7 = [p4];
+ CC = BITTST (r7, 5);
+ if CC jump _double_fault;
+
/* Call C code (trap_c) to handle the exception, which most
* likely involves sending a signal to the current process.
* To avoid double faults, lower our priority to IRQ5 first.
@@ -204,11 +217,57 @@ ENTRY(_ex_trap_c)
DEBUG_START_HWTRACE(p5, r7)
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
- SP = RETN;
+ SP = EX_SCRATCH_REG;
raise 5;
rtx;
ENDPROC(_ex_trap_c)
+/* We just realized we got an exception, while we were processing a different
+ * exception. This is a unrecoverable event, so crash
+ */
+ENTRY(_double_fault)
+ /* Turn caches & protection off, to ensure we don't get any more
+ * double exceptions
+ */
+
+ P4.L = LO(IMEM_CONTROL);
+ P4.H = HI(IMEM_CONTROL);
+
+ R5 = [P4]; /* Control Register*/
+ BITCLR(R5,ENICPLB_P);
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+
+ P4.L = LO(DMEM_CONTROL);
+ P4.H = HI(DMEM_CONTROL);
+ R5 = [P4];
+ BITCLR(R5,ENDCPLB_P);
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+
+ /* Fix up the stack */
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ SP = EX_SCRATCH_REG;
+
+ /* We should be out of the exception stack, and back down into
+ * kernel or user space stack
+ */
+ SAVE_ALL_SYS
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ SP += -12;
+ call _double_fault_c;
+ SP += 12;
+.L_double_fault_panic:
+ JUMP .L_double_fault_panic
+
+ENDPROC(_double_fault)
+
ENTRY(_exception_to_level5)
SAVE_ALL_SYS
@@ -279,7 +338,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
* covered by a CPLB. Switch to an exception stack; use RETN as a
* scratch register (for want of a better option).
*/
- retn = sp;
+ EX_SCRATCH_REG = sp;
sp.l = _exception_stack_top;
sp.h = _exception_stack_top;
/* Try to deal with syscalls quickly. */
@@ -290,8 +349,8 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
r6.l = lo(SEQSTAT_EXCAUSE);
r6.h = hi(SEQSTAT_EXCAUSE);
r7 = r7 & r6;
- p5.h = _extable;
- p5.l = _extable;
+ p5.h = _ex_table;
+ p5.l = _ex_table;
p4 = r7;
p5 = p5 + (p4 << 2);
p4 = [p5];
@@ -634,9 +693,9 @@ ENTRY(_return_from_int)
p1.h = _schedule_and_signal_from_int;
[p0] = p1;
csync;
-#if defined(ANOMALY_05000281)
- r0.l = lo(CONFIG_BOOT_LOAD);
- r0.h = hi(CONFIG_BOOT_LOAD);
+#if ANOMALY_05000281
+ r0.l = _safe_speculative_execution;
+ r0.h = _safe_speculative_execution;
reti = r0;
#endif
r0 = 0x801f (z);
@@ -648,9 +707,9 @@ ENTRY(_return_from_int)
ENDPROC(_return_from_int)
ENTRY(_lower_to_irq14)
-#if defined(ANOMALY_05000281)
- r0.l = lo(CONFIG_BOOT_LOAD);
- r0.h = hi(CONFIG_BOOT_LOAD);
+#if ANOMALY_05000281
+ r0.l = _safe_speculative_execution;
+ r0.h = _safe_speculative_execution;
reti = r0;
#endif
r0 = 0x401f;
@@ -731,6 +790,114 @@ ENTRY(_init_exception_buff)
rts;
ENDPROC(_init_exception_buff)
+/* We handle this 100% in exception space - to reduce overhead
+ * Only potiential problem is if the software buffer gets swapped out of the
+ * CPLB table - then double fault. - so we don't let this happen in other places
+ */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ENTRY(_ex_trace_buff_full)
+ [--sp] = P3;
+ [--sp] = P2;
+ [--sp] = LC0;
+ [--sp] = LT0;
+ [--sp] = LB0;
+ P5.L = _trace_buff_offset;
+ P5.H = _trace_buff_offset;
+ P3 = [P5]; /* trace_buff_offset */
+ P5.L = lo(TBUFSTAT);
+ P5.H = hi(TBUFSTAT);
+ R7 = [P5];
+ R7 <<= 1; /* double, since we need to read twice */
+ LC0 = R7;
+ R7 <<= 2; /* need to shift over again,
+ * to get the number of bytes */
+ P5.L = lo(TBUF);
+ P5.H = hi(TBUF);
+ R6 = ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*1024) - 1;
+
+ P2 = R7;
+ P3 = P3 + P2;
+ R7 = P3;
+ R7 = R7 & R6;
+ P3 = R7;
+ P2.L = _trace_buff_offset;
+ P2.H = _trace_buff_offset;
+ [P2] = P3;
+
+ P2.L = _software_trace_buff;
+ P2.H = _software_trace_buff;
+
+ LSETUP (.Lstart, .Lend) LC0;
+.Lstart:
+ R7 = [P5]; /* read TBUF */
+ P4 = P3 + P2;
+ [P4] = R7;
+ P3 += -4;
+ R7 = P3;
+ R7 = R7 & R6;
+.Lend:
+ P3 = R7;
+
+ LB0 = [sp++];
+ LT0 = [sp++];
+ LC0 = [sp++];
+ P2 = [sp++];
+ P3 = [sp++];
+ jump _return_from_exception;
+ENDPROC(_ex_trace_buff_full)
+
+#if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4
+.data
+#else
+.section .l1.data.B
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN */
+ENTRY(_trace_buff_offset)
+ .long 0;
+ALIGN
+ENTRY(_software_trace_buff)
+ .rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256);
+ .long 0
+ .endr
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */
+
+#if CONFIG_EARLY_PRINTK
+.section .init.text
+ENTRY(_early_trap)
+ SAVE_ALL_SYS
+ trace_buffer_stop(p0,r0);
+
+ /* Turn caches off, to ensure we don't get double exceptions */
+
+ P4.L = LO(IMEM_CONTROL);
+ P4.H = HI(IMEM_CONTROL);
+
+ R5 = [P4]; /* Control Register*/
+ BITCLR(R5,ENICPLB_P);
+ CLI R1;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+
+ P4.L = LO(DMEM_CONTROL);
+ P4.H = HI(DMEM_CONTROL);
+ R5 = [P4];
+ BITCLR(R5,ENDCPLB_P);
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R1;
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ r1 = RETX;
+
+ SP += -12;
+ call _early_trap_c;
+ SP += 12;
+ENDPROC(_early_trap)
+#endif /* CONFIG_EARLY_PRINTK */
+
/*
* Put these in the kernel data section - that should always be covered by
* a CPLB. This is needed to ensure we don't get double fault conditions
@@ -741,30 +908,33 @@ ENDPROC(_init_exception_buff)
#else
.data
#endif
-ALIGN
-_extable:
+ENTRY(_ex_table)
/* entry for each EXCAUSE[5:0]
* This table must be in sync with the table in ./kernel/traps.c
* EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
*/
- .long _ex_syscall; /* 0x00 - User Defined - Linux Syscall */
+ .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */
.long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */
- .long _ex_trap_c /* 0x02 - User Defined */
+ .long _ex_replaceable /* 0x02 - User Defined */
.long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */
- .long _ex_trap_c /* 0x04 - User Defined */
- .long _ex_trap_c /* 0x05 - User Defined */
- .long _ex_trap_c /* 0x06 - User Defined */
- .long _ex_trap_c /* 0x07 - User Defined */
- .long _ex_trap_c /* 0x08 - User Defined */
- .long _ex_trap_c /* 0x09 - User Defined */
- .long _ex_trap_c /* 0x0A - User Defined */
- .long _ex_trap_c /* 0x0B - User Defined */
- .long _ex_trap_c /* 0x0C - User Defined */
- .long _ex_trap_c /* 0x0D - User Defined */
- .long _ex_trap_c /* 0x0E - User Defined */
- .long _ex_trap_c /* 0x0F - User Defined */
+ .long _ex_replaceable /* 0x04 - User Defined */
+ .long _ex_replaceable /* 0x05 - User Defined */
+ .long _ex_replaceable /* 0x06 - User Defined */
+ .long _ex_replaceable /* 0x07 - User Defined */
+ .long _ex_replaceable /* 0x08 - User Defined */
+ .long _ex_replaceable /* 0x09 - User Defined */
+ .long _ex_replaceable /* 0x0A - User Defined */
+ .long _ex_replaceable /* 0x0B - User Defined */
+ .long _ex_replaceable /* 0x0C - User Defined */
+ .long _ex_replaceable /* 0x0D - User Defined */
+ .long _ex_replaceable /* 0x0E - User Defined */
+ .long _ex_replaceable /* 0x0F - User Defined */
.long _ex_single_step /* 0x10 - HW Single step */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ .long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */
+#else
.long _ex_trap_c /* 0x11 - Trace Buffer Full */
+#endif
.long _ex_trap_c /* 0x12 - Reserved */
.long _ex_trap_c /* 0x13 - Reserved */
.long _ex_trap_c /* 0x14 - Reserved */
@@ -812,8 +982,8 @@ _extable:
.long _ex_trap_c /* 0x3D - Reserved */
.long _ex_trap_c /* 0x3E - Reserved */
.long _ex_trap_c /* 0x3F - Reserved */
+END(_ex_table)
-ALIGN
ENTRY(_sys_call_table)
.long _sys_restart_syscall /* 0 */
.long _sys_exit
@@ -1184,7 +1354,7 @@ _exception_stack:
.endr
_exception_stack_top:
-#if defined(ANOMALY_05000261)
+#if ANOMALY_05000261
/* Used by the assembly entry point to work around an anomaly. */
_last_cplb_fault_retx:
.long 0;
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 203e2070916..c6b32fe0f6e 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -46,30 +46,6 @@
.align 4 /* just in case */
-/*
- * initial interrupt handlers
- */
-
-#ifndef CONFIG_KGDB
- /* interrupt routine for emulation - 0 */
- /* Currently used only if GDB stub is not in - invalid */
- /* gdb-stub set the evt itself */
- /* save registers for post-mortem only */
-ENTRY(_evt_emulation)
- SAVE_ALL_SYS
-#ifdef CONFIG_FRAME_POINTER
- fp = 0;
-#endif
- r0 = IRQ_EMU;
- r1 = sp;
- SP += -12;
- call _irq_panic;
- SP += 12;
- /* - GDB stub fills this in by itself (if defined) */
- rte;
-ENDPROC(_evt_emulation)
-#endif
-
/* Common interrupt entry code. First we do CLI, then push
* RETI, to keep interrupts disabled, but to allow this state to be changed
* by local_bh_enable.
@@ -140,7 +116,7 @@ __common_int_entry:
fp = 0;
#endif
-#if defined (ANOMALY_05000283) || defined (ANOMALY_05000315)
+#if ANOMALY_05000283 || ANOMALY_05000315
cc = r7 == r7;
p5.h = 0xffc0;
p5.l = 0x0014;
@@ -163,7 +139,7 @@ ENTRY(_evt_ivhw)
#ifdef CONFIG_FRAME_POINTER
fp = 0;
#endif
-#ifdef ANOMALY_05000283
+#if ANOMALY_05000283
cc = r7 == r7;
p5.h = 0xffc0;
p5.l = 0x0014;
@@ -201,27 +177,15 @@ ENTRY(_evt_ivhw)
jump .Lcommon_restore_context;
#endif
-/* interrupt routine for evt2 - 2. This is NMI. */
-ENTRY(_evt_evt2)
- SAVE_CONTEXT
-#ifdef CONFIG_FRAME_POINTER
- fp = 0;
-#endif
-#ifdef ANOMALY_05000283
- cc = r7 == r7;
- p5.h = 0xffc0;
- p5.l = 0x0014;
- if cc jump 1f;
- r7.l = W[p5];
-1:
-#endif
- r0 = IRQ_NMI;
- r1 = sp;
- SP += -12;
- call _asm_do_IRQ;
- SP += 12;
- RESTORE_CONTEXT
+/* Interrupt routine for evt2 (NMI).
+ * We don't actually use this, so just return.
+ * For inner circle type details, please see:
+ * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi
+ */
+ENTRY(_evt_nmi)
+.weak _evt_nmi
rtn;
+ENDPROC(_evt_nmi)
/* interrupt routine for core timer - 6 */
ENTRY(_evt_timer)
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
index 660f881b620..2db3546fc87 100644
--- a/arch/blackfin/mach-common/ints-priority-dc.c
+++ b/arch/blackfin/mach-common/ints-priority-dc.c
@@ -221,7 +221,7 @@ static unsigned int bf561_gpio_irq_startup(unsigned int irq)
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
@@ -261,7 +261,7 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type)
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
@@ -362,10 +362,11 @@ void __init init_exception_vectors(void)
{
SSYNC();
-#ifndef CONFIG_KGDB
- bfin_write_EVT0(evt_emulation);
-#endif
- bfin_write_EVT2(evt_evt2);
+ /* cannot program in software:
+ * evt0 - emulation (jtag)
+ * evt1 - reset
+ */
+ bfin_write_EVT2(evt_nmi);
bfin_write_EVT3(trap);
bfin_write_EVT5(evt_ivhw);
bfin_write_EVT6(evt_timer);
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
index 4708023fe71..d3b7672b2b9 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -343,7 +343,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
u16 gpionr = irq - IRQ_PF0;
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -377,7 +377,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -587,7 +587,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
}
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -627,7 +627,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -721,10 +721,11 @@ void __init init_exception_vectors(void)
{
SSYNC();
-#ifndef CONFIG_KGDB
- bfin_write_EVT0(evt_emulation);
-#endif
- bfin_write_EVT2(evt_evt2);
+ /* cannot program in software:
+ * evt0 - emulation (jtag)
+ * evt1 - reset
+ */
+ bfin_write_EVT2(evt_nmi);
bfin_write_EVT3(trap);
bfin_write_EVT5(evt_ivhw);
bfin_write_EVT6(evt_timer);
diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S
index 386ac8dda07..28b87fe9ce3 100644
--- a/arch/blackfin/mach-common/lock.S
+++ b/arch/blackfin/mach-common/lock.S
@@ -33,7 +33,7 @@
.text
-#ifdef CONFIG_BLKFIN_CACHE_LOCK
+#ifdef CONFIG_BFIN_ICACHE_LOCK
/* When you come here, it is assumed that
* R0 - Which way to be locked
@@ -43,12 +43,12 @@ ENTRY(_cache_grab_lock)
[--SP]=( R7:0,P5:0 );
- P1.H = (IMEM_CONTROL >> 16);
- P1.L = (IMEM_CONTROL & 0xFFFF);
- P5.H = (ICPLB_ADDR0 >> 16);
- P5.L = (ICPLB_ADDR0 & 0xFFFF);
- P4.H = (ICPLB_DATA0 >> 16);
- P4.L = (ICPLB_DATA0 & 0xFFFF);
+ P1.H = HI(IMEM_CONTROL);
+ P1.L = LO(IMEM_CONTROL);
+ P5.H = HI(ICPLB_ADDR0);
+ P5.L = LO(ICPLB_ADDR0);
+ P4.H = HI(ICPLB_DATA0);
+ P4.L = LO(ICPLB_DATA0);
R7 = R0;
/* If the code of interest already resides in the cache
@@ -167,8 +167,8 @@ ENTRY(_cache_lock)
[--SP]=( R7:0,P5:0 );
- P1.H = (IMEM_CONTROL >> 16);
- P1.L = (IMEM_CONTROL & 0xFFFF);
+ P1.H = HI(IMEM_CONTROL);
+ P1.L = LO(IMEM_CONTROL);
/* Disable the Interrupts*/
CLI R3;
@@ -189,14 +189,14 @@ ENTRY(_cache_lock)
RTS;
ENDPROC(_cache_lock)
-#endif /* BLKFIN_CACHE_LOCK */
+#endif /* BFIN_ICACHE_LOCK */
/* Return the ILOC bits of IMEM_CONTROL
*/
ENTRY(_read_iloc)
- P1.H = (IMEM_CONTROL >> 16);
- P1.L = (IMEM_CONTROL & 0xFFFF);
+ P1.H = HI(IMEM_CONTROL);
+ P1.L = LO(IMEM_CONTROL);
R1 = 0xF;
R0 = [P1];
R0 = R0 >> 3;
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index 68459cc052a..e97ea8fc8dc 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -53,7 +53,7 @@ static unsigned long empty_bad_page;
unsigned long empty_zero_page;
-void __init show_mem(void)
+void show_mem(void)
{
unsigned long i;
int free = 0, total = 0, reserved = 0, shared = 0;
diff --git a/arch/blackfin/oprofile/op_blackfin.h b/arch/blackfin/oprofile/op_blackfin.h
index f88f446c814..05dd08c9d15 100644
--- a/arch/blackfin/oprofile/op_blackfin.h
+++ b/arch/blackfin/oprofile/op_blackfin.h
@@ -68,7 +68,7 @@ static inline unsigned int ctr_read(void)
unsigned int tmp;
tmp = bfin_read_PFCTL();
- __builtin_bfin_csync();
+ CSYNC();
return tmp;
}
@@ -76,21 +76,21 @@ static inline unsigned int ctr_read(void)
static inline void ctr_write(unsigned int val)
{
bfin_write_PFCTL(val);
- __builtin_bfin_csync();
+ CSYNC();
}
static inline void count_read(unsigned int *count)
{
count[0] = bfin_read_PFCNTR0();
count[1] = bfin_read_PFCNTR1();
- __builtin_bfin_csync();
+ CSYNC();
}
static inline void count_write(unsigned int *count)
{
bfin_write_PFCNTR0(count[0]);
bfin_write_PFCNTR1(count[1]);
- __builtin_bfin_csync();
+ CSYNC();
}
extern int pm_overflow_handler(int irq, struct pt_regs *regs);
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 97b64d7d6bf..2d85e4b8730 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -226,7 +226,7 @@ config PARAVIRT
However, when run without a hypervisor the kernel is
theoretically slower. If in doubt, say N.
-source "arch/i386/xen/Kconfig"
+source "arch/x86/xen/Kconfig"
config VMI
bool "VMI Paravirt-ops support"
@@ -707,7 +707,7 @@ config MATH_EMULATION
intend to use this kernel on different machines.
More information about the internals of the Linux math coprocessor
- emulation can be found in <file:arch/i386/math-emu/README>.
+ emulation can be found in <file:arch/x86/math-emu/README>.
If you are not sure, say Y; apart from resulting in a 66 KB bigger
kernel, it won't hurt.
@@ -1067,7 +1067,7 @@ config APM_REAL_MODE_POWER_OFF
endif # APM
-source "arch/i386/kernel/cpu/cpufreq/Kconfig"
+source "arch/x86/kernel/cpu/cpufreq/Kconfig"
endmenu
@@ -1240,7 +1240,7 @@ menuconfig INSTRUMENTATION
if INSTRUMENTATION
-source "arch/i386/oprofile/Kconfig"
+source "arch/x86/oprofile/Kconfig"
config KPROBES
bool "Kprobes"
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index 52b932478c6..5e50dbf00f3 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -17,6 +17,9 @@
# 20050320 Kianusch Sayah Karadji <kianusch@sk-tech.net>
# Added support for GEODE CPU
+# Fill in SRCARCH
+SRCARCH := x86
+
HAS_BIARCH := $(call cc-option-yn, -m32)
ifeq ($(HAS_BIARCH),y)
AS := $(AS) --32
@@ -61,62 +64,62 @@ AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONF
CFLAGS += $(cflags-y)
# Default subarch .c files
-mcore-y := mach-default
+mcore-y := arch/x86/mach-default
# Voyager subarch support
-mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-i386/mach-voyager
-mcore-$(CONFIG_X86_VOYAGER) := mach-voyager
+mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-x86/mach-voyager
+mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager
# VISWS subarch support
-mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-i386/mach-visws
-mcore-$(CONFIG_X86_VISWS) := mach-visws
+mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws
+mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws
# NUMAQ subarch support
-mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-i386/mach-numaq
-mcore-$(CONFIG_X86_NUMAQ) := mach-default
+mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq
+mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default
# BIGSMP subarch support
-mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-i386/mach-bigsmp
-mcore-$(CONFIG_X86_BIGSMP) := mach-default
+mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp
+mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default
#Summit subarch support
-mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-i386/mach-summit
-mcore-$(CONFIG_X86_SUMMIT) := mach-default
+mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit
+mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default
# generic subarchitecture
-mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-i386/mach-generic
-mcore-$(CONFIG_X86_GENERICARCH) := mach-default
-core-$(CONFIG_X86_GENERICARCH) += arch/i386/mach-generic/
+mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-x86/mach-generic
+mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default
+core-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
# ES7000 subarch support
-mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-i386/mach-es7000
-mcore-$(CONFIG_X86_ES7000) := mach-default
-core-$(CONFIG_X86_ES7000) := arch/i386/mach-es7000/
+mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000
+mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default
+core-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/
# Xen paravirtualization support
-core-$(CONFIG_XEN) += arch/i386/xen/
+core-$(CONFIG_XEN) += arch/x86/xen/
# default subarch .h files
-mflags-y += -Iinclude/asm-i386/mach-default
+mflags-y += -Iinclude/asm-x86/mach-default
-head-y := arch/i386/kernel/head.o arch/i386/kernel/init_task.o
+head-y := arch/x86/kernel/head_32.o arch/x86/kernel/init_task_32.o
-libs-y += arch/i386/lib/
-core-y += arch/i386/kernel/ \
- arch/i386/mm/ \
- arch/i386/$(mcore-y)/ \
- arch/i386/crypto/
-drivers-$(CONFIG_MATH_EMULATION) += arch/i386/math-emu/
-drivers-$(CONFIG_PCI) += arch/i386/pci/
+libs-y += arch/x86/lib/
+core-y += arch/x86/kernel/ \
+ arch/x86/mm/ \
+ $(mcore-y)/ \
+ arch/x86/crypto/
+drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
+drivers-$(CONFIG_PCI) += arch/x86/pci/
# must be linked after kernel/
-drivers-$(CONFIG_OPROFILE) += arch/i386/oprofile/
-drivers-$(CONFIG_PM) += arch/i386/power/
-drivers-$(CONFIG_FB) += arch/i386/video/
+drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
+drivers-$(CONFIG_PM) += arch/x86/power/
+drivers-$(CONFIG_FB) += arch/x86/video/
CFLAGS += $(mflags-y)
AFLAGS += $(mflags-y)
-boot := arch/i386/boot
+boot := arch/x86/boot
PHONY += zImage bzImage compressed zlilo bzlilo \
zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
@@ -125,9 +128,11 @@ all: bzImage
# KBUILD_IMAGE specify target image being built
KBUILD_IMAGE := $(boot)/bzImage
-zImage zlilo zdisk: KBUILD_IMAGE := arch/i386/boot/zImage
+zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage
zImage bzImage: vmlinux
+ $(Q)mkdir -p $(objtree)/arch/i386/boot
+ $(Q)ln -fsn $(objtree)/arch/x86/boot/bzImage $(objtree)/arch/i386/boot/bzImage
$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
compressed: zImage
@@ -145,7 +150,8 @@ install:
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
archclean:
- $(Q)$(MAKE) $(clean)=arch/i386/boot
+ $(Q)rm -rf $(objtree)/arch/i386/boot
+ $(Q)$(MAKE) $(clean)=arch/x86/boot
define archhelp
echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
diff --git a/arch/i386/boot/Makefile b/arch/i386/boot/Makefile
deleted file mode 100644
index 93386a4e40b..00000000000
--- a/arch/i386/boot/Makefile
+++ /dev/null
@@ -1,171 +0,0 @@
-#
-# arch/i386/boot/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-#
-
-# ROOT_DEV specifies the default root-device when making the image.
-# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
-# the default of FLOPPY is used by 'build'.
-
-ROOT_DEV := CURRENT
-
-# If you want to preset the SVGA mode, uncomment the next line and
-# set SVGA_MODE to whatever number you want.
-# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
-# The number is the same as you would ordinarily press at bootup.
-
-SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
-
-# If you want the RAM disk device, define this to be the size in blocks.
-
-#RAMDISK := -DRAMDISK=512
-
-targets := vmlinux.bin setup.bin setup.elf zImage bzImage
-subdir- := compressed
-
-setup-y += a20.o apm.o cmdline.o copy.o cpu.o cpucheck.o edd.o
-setup-y += header.o main.o mca.o memory.o pm.o pmjump.o
-setup-y += printf.o string.o tty.o video.o version.o voyager.o
-
-# The link order of the video-*.o modules can matter. In particular,
-# video-vga.o *must* be listed first, followed by video-vesa.o.
-# Hardware-specific drivers should follow in the order they should be
-# probed, and video-bios.o should typically be last.
-setup-y += video-vga.o
-setup-y += video-vesa.o
-setup-y += video-bios.o
-targets += $(setup-y)
-hostprogs-y := tools/build
-
-HOSTCFLAGS_build.o := $(LINUXINCLUDE)
-
-# ---------------------------------------------------------------------------
-
-# How to compile the 16-bit code. Note we always compile for -march=i386,
-# that way we can complain to the user if the CPU is insufficient.
-cflags-i386 :=
-cflags-x86_64 := -m32
-CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
- $(cflags-$(ARCH)) \
- -Wall -Wstrict-prototypes \
- -march=i386 -mregparm=3 \
- -include $(srctree)/$(src)/code16gcc.h \
- -fno-strict-aliasing -fomit-frame-pointer \
- $(call cc-option, -ffreestanding) \
- $(call cc-option, -fno-toplevel-reorder,\
- $(call cc-option, -fno-unit-at-a-time)) \
- $(call cc-option, -fno-stack-protector) \
- $(call cc-option, -mpreferred-stack-boundary=2)
-AFLAGS := $(CFLAGS) -D__ASSEMBLY__
-
-$(obj)/zImage: IMAGE_OFFSET := 0x1000
-$(obj)/zImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK)
-$(obj)/bzImage: IMAGE_OFFSET := 0x100000
-$(obj)/bzImage: EXTRA_CFLAGS := -D__BIG_KERNEL__
-$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
-$(obj)/bzImage: BUILDFLAGS := -b
-
-quiet_cmd_image = BUILD $@
-cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \
- $(obj)/vmlinux.bin $(ROOT_DEV) > $@
-
-$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \
- $(obj)/vmlinux.bin $(obj)/tools/build FORCE
- $(call if_changed,image)
- @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
-
-$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,objcopy)
-
-SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
-
-LDFLAGS_setup.elf := -T
-$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
- $(call if_changed,ld)
-
-OBJCOPYFLAGS_setup.bin := -O binary
-
-$(obj)/setup.bin: $(obj)/setup.elf FORCE
- $(call if_changed,objcopy)
-
-$(obj)/compressed/vmlinux: FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
-
-# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
-FDARGS =
-# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
-FDINITRD =
-
-image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
-
-$(obj)/mtools.conf: $(src)/mtools.conf.in
- sed -e 's|@OBJ@|$(obj)|g' < $< > $@
-
-# This requires write access to /dev/fd0
-zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
- MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
- syslinux /dev/fd0 ; sync
- echo '$(image_cmdline)' | \
- MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg
- if [ -f '$(FDINITRD)' ] ; then \
- MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
- fi
- MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync
-
-# These require being root or having syslinux 2.02 or higher installed
-fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
- dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
- MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
- syslinux $(obj)/fdimage ; sync
- echo '$(image_cmdline)' | \
- MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
- if [ -f '$(FDINITRD)' ] ; then \
- MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
- fi
- MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync
-
-fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
- dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
- MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
- syslinux $(obj)/fdimage ; sync
- echo '$(image_cmdline)' | \
- MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
- if [ -f '$(FDINITRD)' ] ; then \
- MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
- fi
- MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync
-
-isoimage: $(BOOTIMAGE)
- -rm -rf $(obj)/isoimage
- mkdir $(obj)/isoimage
- for i in lib lib64 share end ; do \
- if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
- cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
- break ; \
- fi ; \
- if [ $$i = end ] ; then exit 1 ; fi ; \
- done
- cp $(BOOTIMAGE) $(obj)/isoimage/linux
- echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
- if [ -f '$(FDINITRD)' ] ; then \
- cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
- fi
- mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
- -no-emul-boot -boot-load-size 4 -boot-info-table \
- $(obj)/isoimage
- rm -rf $(obj)/isoimage
-
-zlilo: $(BOOTIMAGE)
- if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
- if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
- cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
- cp System.map $(INSTALL_PATH)/
- if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
-
-install:
- sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/arch/i386/boot/compressed/Makefile b/arch/i386/boot/compressed/Makefile
deleted file mode 100644
index 189fa1dbefc..00000000000
--- a/arch/i386/boot/compressed/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# linux/arch/i386/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o \
- vmlinux.bin.all vmlinux.relocs
-EXTRA_AFLAGS := -traditional
-
-LDFLAGS_vmlinux := -T
-hostprogs-y := relocs
-
-CFLAGS := -m32 -D__KERNEL__ $(LINUX_INCLUDE) -O2 \
- -fno-strict-aliasing -fPIC \
- $(call cc-option,-ffreestanding) \
- $(call cc-option,-fno-stack-protector)
-LDFLAGS := -m elf_i386
-
-$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
- $(call if_changed,ld)
- @:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-quiet_cmd_relocs = RELOCS $@
- cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
-$(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE
- $(call if_changed,relocs)
-
-vmlinux.bin.all-y := $(obj)/vmlinux.bin
-vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs
-quiet_cmd_relocbin = BUILD $@
- cmd_relocbin = cat $(filter-out FORCE,$^) > $@
-$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
- $(call if_changed,relocbin)
-
-ifdef CONFIG_RELOCATABLE
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,gzip)
-else
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-endif
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
-
-$(obj)/piggy.o: $(src)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
- $(call if_changed,ld)
diff --git a/arch/i386/crypto/Makefile b/arch/i386/crypto/Makefile
deleted file mode 100644
index 3fd19af18e3..00000000000
--- a/arch/i386/crypto/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# i386/crypto/Makefile
-#
-# Arch-specific CryptoAPI modules.
-#
-
-obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
-obj-$(CONFIG_CRYPTO_TWOFISH_586) += twofish-i586.o
-
-aes-i586-y := aes-i586-asm.o aes.o
-twofish-i586-y := twofish-i586-asm.o twofish.o
-
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
deleted file mode 100644
index 9d33b00de65..00000000000
--- a/arch/i386/kernel/Makefile
+++ /dev/null
@@ -1,88 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := head.o init_task.o vmlinux.lds
-
-obj-y := process.o signal.o entry.o traps.o irq.o \
- ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
- pci-dma.o i386_ksyms.o i387.o bootflag.o e820.o\
- quirks.o i8237.o topology.o alternative.o i8253.o tsc.o
-
-obj-$(CONFIG_STACKTRACE) += stacktrace.o
-obj-y += cpu/
-obj-y += acpi/
-obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
-obj-$(CONFIG_MCA) += mca.o
-obj-$(CONFIG_X86_MSR) += msr.o
-obj-$(CONFIG_X86_CPUID) += cpuid.o
-obj-$(CONFIG_MICROCODE) += microcode.o
-obj-$(CONFIG_APM) += apm.o
-obj-$(CONFIG_X86_SMP) += smp.o smpboot.o tsc_sync.o
-obj-$(CONFIG_SMP) += smpcommon.o
-obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
-obj-$(CONFIG_X86_MPPARSE) += mpparse.o
-obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
-obj-$(CONFIG_X86_IO_APIC) += io_apic.o
-obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups.o
-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
-obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
-obj-$(CONFIG_X86_NUMAQ) += numaq.o
-obj-$(CONFIG_X86_SUMMIT_NUMA) += summit.o
-obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_MODULES) += module.o
-obj-y += sysenter.o vsyscall.o
-obj-$(CONFIG_ACPI_SRAT) += srat.o
-obj-$(CONFIG_EFI) += efi.o efi_stub.o
-obj-$(CONFIG_DOUBLEFAULT) += doublefault.o
-obj-$(CONFIG_VM86) += vm86.o
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_HPET_TIMER) += hpet.o
-obj-$(CONFIG_K8_NB) += k8.o
-obj-$(CONFIG_MGEODE_LX) += geode.o
-
-obj-$(CONFIG_VMI) += vmi.o vmiclock.o
-obj-$(CONFIG_PARAVIRT) += paravirt.o
-obj-y += pcspeaker.o
-
-obj-$(CONFIG_SCx200) += scx200.o
-
-# vsyscall.o contains the vsyscall DSO images as __initdata.
-# We must build both images before we can assemble it.
-# Note: kbuild does not track this dependency due to usage of .incbin
-$(obj)/vsyscall.o: $(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so
-targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
-targets += vsyscall-note.o vsyscall.lds
-
-# The DSO images are built using a special linker script.
-quiet_cmd_syscall = SYSCALL $@
- cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
- -Wl,-T,$(filter-out FORCE,$^) -o $@
-
-export CPPFLAGS_vsyscall.lds += -P -C -U$(ARCH)
-
-vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
-SYSCFLAGS_vsyscall-sysenter.so = $(vsyscall-flags)
-SYSCFLAGS_vsyscall-int80.so = $(vsyscall-flags)
-
-$(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so: \
-$(obj)/vsyscall-%.so: $(src)/vsyscall.lds \
- $(obj)/vsyscall-%.o $(obj)/vsyscall-note.o FORCE
- $(call if_changed,syscall)
-
-# We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO. With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
-extra-y += vsyscall-syms.o
-$(obj)/built-in.o: $(obj)/vsyscall-syms.o
-$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
-
-SYSCFLAGS_vsyscall-syms.o = -r
-$(obj)/vsyscall-syms.o: $(src)/vsyscall.lds \
- $(obj)/vsyscall-sysenter.o $(obj)/vsyscall-note.o FORCE
- $(call if_changed,syscall)
-
-k8-y += ../../x86_64/kernel/k8.o
-stacktrace-y += ../../x86_64/kernel/stacktrace.o
-
diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile
deleted file mode 100644
index 7f7be01f44e..00000000000
--- a/arch/i386/kernel/acpi/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-obj-$(CONFIG_ACPI) += boot.o
-ifneq ($(CONFIG_PCI),)
-obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o
-endif
-obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
-
-ifneq ($(CONFIG_ACPI_PROCESSOR),)
-obj-y += cstate.o processor.o
-endif
-
diff --git a/arch/i386/kernel/asm-offsets.c b/arch/i386/kernel/asm-offsets.c
deleted file mode 100644
index 7288ac88d74..00000000000
--- a/arch/i386/kernel/asm-offsets.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Generate definitions needed by assembly language modules.
- * This code generates raw asm output which is post-processed
- * to extract and format the required data.
- */
-
-#include <linux/crypto.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/personality.h>
-#include <linux/suspend.h>
-#include <asm/ucontext.h>
-#include "sigframe.h"
-#include <asm/pgtable.h>
-#include <asm/fixmap.h>
-#include <asm/processor.h>
-#include <asm/thread_info.h>
-#include <asm/elf.h>
-
-#include <xen/interface/xen.h>
-
-#ifdef CONFIG_LGUEST_GUEST
-#include <linux/lguest.h>
-#include "../../../drivers/lguest/lg.h"
-#endif
-
-#define DEFINE(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-
-#define BLANK() asm volatile("\n->" : : )
-
-#define OFFSET(sym, str, mem) \
- DEFINE(sym, offsetof(struct str, mem));
-
-/* workaround for a warning with -Wmissing-prototypes */
-void foo(void);
-
-void foo(void)
-{
- OFFSET(SIGCONTEXT_eax, sigcontext, eax);
- OFFSET(SIGCONTEXT_ebx, sigcontext, ebx);
- OFFSET(SIGCONTEXT_ecx, sigcontext, ecx);
- OFFSET(SIGCONTEXT_edx, sigcontext, edx);
- OFFSET(SIGCONTEXT_esi, sigcontext, esi);
- OFFSET(SIGCONTEXT_edi, sigcontext, edi);
- OFFSET(SIGCONTEXT_ebp, sigcontext, ebp);
- OFFSET(SIGCONTEXT_esp, sigcontext, esp);
- OFFSET(SIGCONTEXT_eip, sigcontext, eip);
- BLANK();
-
- OFFSET(CPUINFO_x86, cpuinfo_x86, x86);
- OFFSET(CPUINFO_x86_vendor, cpuinfo_x86, x86_vendor);
- OFFSET(CPUINFO_x86_model, cpuinfo_x86, x86_model);
- OFFSET(CPUINFO_x86_mask, cpuinfo_x86, x86_mask);
- OFFSET(CPUINFO_hard_math, cpuinfo_x86, hard_math);
- OFFSET(CPUINFO_cpuid_level, cpuinfo_x86, cpuid_level);
- OFFSET(CPUINFO_x86_capability, cpuinfo_x86, x86_capability);
- OFFSET(CPUINFO_x86_vendor_id, cpuinfo_x86, x86_vendor_id);
- BLANK();
-
- OFFSET(TI_task, thread_info, task);
- OFFSET(TI_exec_domain, thread_info, exec_domain);
- OFFSET(TI_flags, thread_info, flags);
- OFFSET(TI_status, thread_info, status);
- OFFSET(TI_preempt_count, thread_info, preempt_count);
- OFFSET(TI_addr_limit, thread_info, addr_limit);
- OFFSET(TI_restart_block, thread_info, restart_block);
- OFFSET(TI_sysenter_return, thread_info, sysenter_return);
- OFFSET(TI_cpu, thread_info, cpu);
- BLANK();
-
- OFFSET(GDS_size, Xgt_desc_struct, size);
- OFFSET(GDS_address, Xgt_desc_struct, address);
- OFFSET(GDS_pad, Xgt_desc_struct, pad);
- BLANK();
-
- OFFSET(PT_EBX, pt_regs, ebx);
- OFFSET(PT_ECX, pt_regs, ecx);
- OFFSET(PT_EDX, pt_regs, edx);
- OFFSET(PT_ESI, pt_regs, esi);
- OFFSET(PT_EDI, pt_regs, edi);
- OFFSET(PT_EBP, pt_regs, ebp);
- OFFSET(PT_EAX, pt_regs, eax);
- OFFSET(PT_DS, pt_regs, xds);
- OFFSET(PT_ES, pt_regs, xes);
- OFFSET(PT_FS, pt_regs, xfs);
- OFFSET(PT_ORIG_EAX, pt_regs, orig_eax);
- OFFSET(PT_EIP, pt_regs, eip);
- OFFSET(PT_CS, pt_regs, xcs);
- OFFSET(PT_EFLAGS, pt_regs, eflags);
- OFFSET(PT_OLDESP, pt_regs, esp);
- OFFSET(PT_OLDSS, pt_regs, xss);
- BLANK();
-
- OFFSET(EXEC_DOMAIN_handler, exec_domain, handler);
- OFFSET(RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext);
- BLANK();
-
- OFFSET(pbe_address, pbe, address);
- OFFSET(pbe_orig_address, pbe, orig_address);
- OFFSET(pbe_next, pbe, next);
-
- /* Offset from the sysenter stack to tss.esp0 */
- DEFINE(TSS_sysenter_esp0, offsetof(struct tss_struct, x86_tss.esp0) -
- sizeof(struct tss_struct));
-
- DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
- DEFINE(PAGE_SHIFT_asm, PAGE_SHIFT);
- DEFINE(PTRS_PER_PTE, PTRS_PER_PTE);
- DEFINE(PTRS_PER_PMD, PTRS_PER_PMD);
- DEFINE(PTRS_PER_PGD, PTRS_PER_PGD);
-
- DEFINE(VDSO_PRELINK_asm, VDSO_PRELINK);
-
- OFFSET(crypto_tfm_ctx_offset, crypto_tfm, __crt_ctx);
-
-#ifdef CONFIG_PARAVIRT
- BLANK();
- OFFSET(PARAVIRT_enabled, paravirt_ops, paravirt_enabled);
- OFFSET(PARAVIRT_irq_disable, paravirt_ops, irq_disable);
- OFFSET(PARAVIRT_irq_enable, paravirt_ops, irq_enable);
- OFFSET(PARAVIRT_irq_enable_sysexit, paravirt_ops, irq_enable_sysexit);
- OFFSET(PARAVIRT_iret, paravirt_ops, iret);
- OFFSET(PARAVIRT_read_cr0, paravirt_ops, read_cr0);
-#endif
-
-#ifdef CONFIG_XEN
- BLANK();
- OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask);
- OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending);
-#endif
-
-#ifdef CONFIG_LGUEST_GUEST
- BLANK();
- OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled);
- OFFSET(LGUEST_PAGES_host_gdt_desc, lguest_pages, state.host_gdt_desc);
- OFFSET(LGUEST_PAGES_host_idt_desc, lguest_pages, state.host_idt_desc);
- OFFSET(LGUEST_PAGES_host_cr3, lguest_pages, state.host_cr3);
- OFFSET(LGUEST_PAGES_host_sp, lguest_pages, state.host_sp);
- OFFSET(LGUEST_PAGES_guest_gdt_desc, lguest_pages,state.guest_gdt_desc);
- OFFSET(LGUEST_PAGES_guest_idt_desc, lguest_pages,state.guest_idt_desc);
- OFFSET(LGUEST_PAGES_guest_gdt, lguest_pages, state.guest_gdt);
- OFFSET(LGUEST_PAGES_regs_trapnum, lguest_pages, regs.trapnum);
- OFFSET(LGUEST_PAGES_regs_errcode, lguest_pages, regs.errcode);
- OFFSET(LGUEST_PAGES_regs, lguest_pages, regs);
-#endif
-}
diff --git a/arch/i386/kernel/cpu/mtrr/state.c b/arch/i386/kernel/cpu/mtrr/state.c
deleted file mode 100644
index c9014ca4a57..00000000000
--- a/arch/i386/kernel/cpu/mtrr/state.c
+++ /dev/null
@@ -1,79 +0,0 @@
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
-#include <asm-i386/processor-cyrix.h>
-#include "mtrr.h"
-
-
-/* Put the processor into a state where MTRRs can be safely set */
-void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
-{
- unsigned int cr0;
-
- /* Disable interrupts locally */
- local_irq_save(ctxt->flags);
-
- if (use_intel() || is_cpu(CYRIX)) {
-
- /* Save value of CR4 and clear Page Global Enable (bit 7) */
- if ( cpu_has_pge ) {
- ctxt->cr4val = read_cr4();
- write_cr4(ctxt->cr4val & ~X86_CR4_PGE);
- }
-
- /* Disable and flush caches. Note that wbinvd flushes the TLBs as
- a side-effect */
- cr0 = read_cr0() | 0x40000000;
- wbinvd();
- write_cr0(cr0);
- wbinvd();
-
- if (use_intel())
- /* Save MTRR state */
- rdmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
- else
- /* Cyrix ARRs - everything else were excluded at the top */
- ctxt->ccr3 = getCx86(CX86_CCR3);
- }
-}
-
-void set_mtrr_cache_disable(struct set_mtrr_context *ctxt)
-{
- if (use_intel())
- /* Disable MTRRs, and set the default type to uncached */
- mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo & 0xf300UL,
- ctxt->deftype_hi);
- else if (is_cpu(CYRIX))
- /* Cyrix ARRs - everything else were excluded at the top */
- setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10);
-}
-
-/* Restore the processor after a set_mtrr_prepare */
-void set_mtrr_done(struct set_mtrr_context *ctxt)
-{
- if (use_intel() || is_cpu(CYRIX)) {
-
- /* Flush caches and TLBs */
- wbinvd();
-
- /* Restore MTRRdefType */
- if (use_intel())
- /* Intel (P6) standard MTRRs */
- mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
- else
- /* Cyrix ARRs - everything else was excluded at the top */
- setCx86(CX86_CCR3, ctxt->ccr3);
-
- /* Enable caches */
- write_cr0(read_cr0() & 0xbfffffff);
-
- /* Restore value of CR4 */
- if ( cpu_has_pge )
- write_cr4(ctxt->cr4val);
- }
- /* Re-enable interrupts locally (if enabled previously) */
- local_irq_restore(ctxt->flags);
-}
-
diff --git a/arch/i386/kernel/early_printk.c b/arch/i386/kernel/early_printk.c
deleted file mode 100644
index 92f812ba275..00000000000
--- a/arch/i386/kernel/early_printk.c
+++ /dev/null
@@ -1,2 +0,0 @@
-
-#include "../../x86_64/kernel/early_printk.c"
diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S
deleted file mode 100644
index a714d6b4350..00000000000
--- a/arch/i386/kernel/entry.S
+++ /dev/null
@@ -1,1112 +0,0 @@
-/*
- * linux/arch/i386/entry.S
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- */
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- * I changed all the .align's to 4 (16 byte alignment), as that's faster
- * on a 486.
- *
- * Stack layout in 'syscall_exit':
- * ptrace needs to have all regs on the stack.
- * if the order here is changed, it needs to be
- * updated in fork.c:copy_process, signal.c:do_signal,
- * ptrace.c and ptrace.h
- *
- * 0(%esp) - %ebx
- * 4(%esp) - %ecx
- * 8(%esp) - %edx
- * C(%esp) - %esi
- * 10(%esp) - %edi
- * 14(%esp) - %ebp
- * 18(%esp) - %eax
- * 1C(%esp) - %ds
- * 20(%esp) - %es
- * 24(%esp) - %fs
- * 28(%esp) - orig_eax
- * 2C(%esp) - %eip
- * 30(%esp) - %cs
- * 34(%esp) - %eflags
- * 38(%esp) - %oldesp
- * 3C(%esp) - %oldss
- *
- * "current" is in register %ebx during any slow entries.
- */
-
-#include <linux/linkage.h>
-#include <asm/thread_info.h>
-#include <asm/irqflags.h>
-#include <asm/errno.h>
-#include <asm/segment.h>
-#include <asm/smp.h>
-#include <asm/page.h>
-#include <asm/desc.h>
-#include <asm/percpu.h>
-#include <asm/dwarf2.h>
-#include "irq_vectors.h"
-
-/*
- * We use macros for low-level operations which need to be overridden
- * for paravirtualization. The following will never clobber any registers:
- * INTERRUPT_RETURN (aka. "iret")
- * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
- * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
- *
- * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
- * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
- * Allowing a register to be clobbered can shrink the paravirt replacement
- * enough to patch inline, increasing performance.
- */
-
-#define nr_syscalls ((syscall_table_size)/4)
-
-CF_MASK = 0x00000001
-TF_MASK = 0x00000100
-IF_MASK = 0x00000200
-DF_MASK = 0x00000400
-NT_MASK = 0x00004000
-VM_MASK = 0x00020000
-
-#ifdef CONFIG_PREEMPT
-#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
-#else
-#define preempt_stop(clobbers)
-#define resume_kernel restore_nocheck
-#endif
-
-.macro TRACE_IRQS_IRET
-#ifdef CONFIG_TRACE_IRQFLAGS
- testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off?
- jz 1f
- TRACE_IRQS_ON
-1:
-#endif
-.endm
-
-#ifdef CONFIG_VM86
-#define resume_userspace_sig check_userspace
-#else
-#define resume_userspace_sig resume_userspace
-#endif
-
-#define SAVE_ALL \
- cld; \
- pushl %fs; \
- CFI_ADJUST_CFA_OFFSET 4;\
- /*CFI_REL_OFFSET fs, 0;*/\
- pushl %es; \
- CFI_ADJUST_CFA_OFFSET 4;\
- /*CFI_REL_OFFSET es, 0;*/\
- pushl %ds; \
- CFI_ADJUST_CFA_OFFSET 4;\
- /*CFI_REL_OFFSET ds, 0;*/\
- pushl %eax; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET eax, 0;\
- pushl %ebp; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET ebp, 0;\
- pushl %edi; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET edi, 0;\
- pushl %esi; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET esi, 0;\
- pushl %edx; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET edx, 0;\
- pushl %ecx; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET ecx, 0;\
- pushl %ebx; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET ebx, 0;\
- movl $(__USER_DS), %edx; \
- movl %edx, %ds; \
- movl %edx, %es; \
- movl $(__KERNEL_PERCPU), %edx; \
- movl %edx, %fs
-
-#define RESTORE_INT_REGS \
- popl %ebx; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE ebx;\
- popl %ecx; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE ecx;\
- popl %edx; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE edx;\
- popl %esi; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE esi;\
- popl %edi; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE edi;\
- popl %ebp; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE ebp;\
- popl %eax; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE eax
-
-#define RESTORE_REGS \
- RESTORE_INT_REGS; \
-1: popl %ds; \
- CFI_ADJUST_CFA_OFFSET -4;\
- /*CFI_RESTORE ds;*/\
-2: popl %es; \
- CFI_ADJUST_CFA_OFFSET -4;\
- /*CFI_RESTORE es;*/\
-3: popl %fs; \
- CFI_ADJUST_CFA_OFFSET -4;\
- /*CFI_RESTORE fs;*/\
-.pushsection .fixup,"ax"; \
-4: movl $0,(%esp); \
- jmp 1b; \
-5: movl $0,(%esp); \
- jmp 2b; \
-6: movl $0,(%esp); \
- jmp 3b; \
-.section __ex_table,"a";\
- .align 4; \
- .long 1b,4b; \
- .long 2b,5b; \
- .long 3b,6b; \
-.popsection
-
-#define RING0_INT_FRAME \
- CFI_STARTPROC simple;\
- CFI_SIGNAL_FRAME;\
- CFI_DEF_CFA esp, 3*4;\
- /*CFI_OFFSET cs, -2*4;*/\
- CFI_OFFSET eip, -3*4
-
-#define RING0_EC_FRAME \
- CFI_STARTPROC simple;\
- CFI_SIGNAL_FRAME;\
- CFI_DEF_CFA esp, 4*4;\
- /*CFI_OFFSET cs, -2*4;*/\
- CFI_OFFSET eip, -3*4
-
-#define RING0_PTREGS_FRAME \
- CFI_STARTPROC simple;\
- CFI_SIGNAL_FRAME;\
- CFI_DEF_CFA esp, PT_OLDESP-PT_EBX;\
- /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/\
- CFI_OFFSET eip, PT_EIP-PT_OLDESP;\
- /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/\
- /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/\
- CFI_OFFSET eax, PT_EAX-PT_OLDESP;\
- CFI_OFFSET ebp, PT_EBP-PT_OLDESP;\
- CFI_OFFSET edi, PT_EDI-PT_OLDESP;\
- CFI_OFFSET esi, PT_ESI-PT_OLDESP;\
- CFI_OFFSET edx, PT_EDX-PT_OLDESP;\
- CFI_OFFSET ecx, PT_ECX-PT_OLDESP;\
- CFI_OFFSET ebx, PT_EBX-PT_OLDESP
-
-ENTRY(ret_from_fork)
- CFI_STARTPROC
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- call schedule_tail
- GET_THREAD_INFO(%ebp)
- popl %eax
- CFI_ADJUST_CFA_OFFSET -4
- pushl $0x0202 # Reset kernel eflags
- CFI_ADJUST_CFA_OFFSET 4
- popfl
- CFI_ADJUST_CFA_OFFSET -4
- jmp syscall_exit
- CFI_ENDPROC
-END(ret_from_fork)
-
-/*
- * Return to user mode is not as complex as all this looks,
- * but we want the default path for a system call return to
- * go as quickly as possible which is why some of this is
- * less clear than it otherwise should be.
- */
-
- # userspace resumption stub bypassing syscall exit tracing
- ALIGN
- RING0_PTREGS_FRAME
-ret_from_exception:
- preempt_stop(CLBR_ANY)
-ret_from_intr:
- GET_THREAD_INFO(%ebp)
-check_userspace:
- movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS
- movb PT_CS(%esp), %al
- andl $(VM_MASK | SEGMENT_RPL_MASK), %eax
- cmpl $USER_RPL, %eax
- jb resume_kernel # not returning to v8086 or userspace
-
-ENTRY(resume_userspace)
- DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
- # setting need_resched or sigpending
- # between sampling and the iret
- movl TI_flags(%ebp), %ecx
- andl $_TIF_WORK_MASK, %ecx # is there any work to be done on
- # int/exception return?
- jne work_pending
- jmp restore_all
-END(ret_from_exception)
-
-#ifdef CONFIG_PREEMPT
-ENTRY(resume_kernel)
- DISABLE_INTERRUPTS(CLBR_ANY)
- cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ?
- jnz restore_nocheck
-need_resched:
- movl TI_flags(%ebp), %ecx # need_resched set ?
- testb $_TIF_NEED_RESCHED, %cl
- jz restore_all
- testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off (exception path) ?
- jz restore_all
- call preempt_schedule_irq
- jmp need_resched
-END(resume_kernel)
-#endif
- CFI_ENDPROC
-
-/* SYSENTER_RETURN points to after the "sysenter" instruction in
- the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */
-
- # sysenter call handler stub
-ENTRY(sysenter_entry)
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA esp, 0
- CFI_REGISTER esp, ebp
- movl TSS_sysenter_esp0(%esp),%esp
-sysenter_past_esp:
- /*
- * No need to follow this irqs on/off section: the syscall
- * disabled irqs and here we enable it straight after entry:
- */
- ENABLE_INTERRUPTS(CLBR_NONE)
- pushl $(__USER_DS)
- CFI_ADJUST_CFA_OFFSET 4
- /*CFI_REL_OFFSET ss, 0*/
- pushl %ebp
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET esp, 0
- pushfl
- CFI_ADJUST_CFA_OFFSET 4
- pushl $(__USER_CS)
- CFI_ADJUST_CFA_OFFSET 4
- /*CFI_REL_OFFSET cs, 0*/
- /*
- * Push current_thread_info()->sysenter_return to the stack.
- * A tiny bit of offset fixup is necessary - 4*4 means the 4 words
- * pushed above; +8 corresponds to copy_thread's esp0 setting.
- */
- pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET eip, 0
-
-/*
- * Load the potential sixth argument from user stack.
- * Careful about security.
- */
- cmpl $__PAGE_OFFSET-3,%ebp
- jae syscall_fault
-1: movl (%ebp),%ebp
-.section __ex_table,"a"
- .align 4
- .long 1b,syscall_fault
-.previous
-
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- GET_THREAD_INFO(%ebp)
-
- /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
- testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
- jnz syscall_trace_entry
- cmpl $(nr_syscalls), %eax
- jae syscall_badsys
- call *sys_call_table(,%eax,4)
- movl %eax,PT_EAX(%esp)
- DISABLE_INTERRUPTS(CLBR_ANY)
- TRACE_IRQS_OFF
- movl TI_flags(%ebp), %ecx
- testw $_TIF_ALLWORK_MASK, %cx
- jne syscall_exit_work
-/* if something modifies registers it must also disable sysexit */
- movl PT_EIP(%esp), %edx
- movl PT_OLDESP(%esp), %ecx
- xorl %ebp,%ebp
- TRACE_IRQS_ON
-1: mov PT_FS(%esp), %fs
- ENABLE_INTERRUPTS_SYSEXIT
- CFI_ENDPROC
-.pushsection .fixup,"ax"
-2: movl $0,PT_FS(%esp)
- jmp 1b
-.section __ex_table,"a"
- .align 4
- .long 1b,2b
-.popsection
-ENDPROC(sysenter_entry)
-
- # system call handler stub
-ENTRY(system_call)
- RING0_INT_FRAME # can't unwind into user space anyway
- pushl %eax # save orig_eax
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- GET_THREAD_INFO(%ebp)
- # system call tracing in operation / emulation
- /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
- testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
- jnz syscall_trace_entry
- cmpl $(nr_syscalls), %eax
- jae syscall_badsys
-syscall_call:
- call *sys_call_table(,%eax,4)
- movl %eax,PT_EAX(%esp) # store the return value
-syscall_exit:
- DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
- # setting need_resched or sigpending
- # between sampling and the iret
- TRACE_IRQS_OFF
- testl $TF_MASK,PT_EFLAGS(%esp) # If tracing set singlestep flag on exit
- jz no_singlestep
- orl $_TIF_SINGLESTEP,TI_flags(%ebp)
-no_singlestep:
- movl TI_flags(%ebp), %ecx
- testw $_TIF_ALLWORK_MASK, %cx # current->work
- jne syscall_exit_work
-
-restore_all:
- movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
- # Warning: PT_OLDSS(%esp) contains the wrong/random values if we
- # are returning to the kernel.
- # See comments in process.c:copy_thread() for details.
- movb PT_OLDSS(%esp), %ah
- movb PT_CS(%esp), %al
- andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
- cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
- CFI_REMEMBER_STATE
- je ldt_ss # returning to user-space with LDT SS
-restore_nocheck:
- TRACE_IRQS_IRET
-restore_nocheck_notrace:
- RESTORE_REGS
- addl $4, %esp # skip orig_eax/error_code
- CFI_ADJUST_CFA_OFFSET -4
-1: INTERRUPT_RETURN
-.section .fixup,"ax"
-iret_exc:
- pushl $0 # no error code
- pushl $do_iret_error
- jmp error_code
-.previous
-.section __ex_table,"a"
- .align 4
- .long 1b,iret_exc
-.previous
-
- CFI_RESTORE_STATE
-ldt_ss:
- larl PT_OLDSS(%esp), %eax
- jnz restore_nocheck
- testl $0x00400000, %eax # returning to 32bit stack?
- jnz restore_nocheck # allright, normal return
-
-#ifdef CONFIG_PARAVIRT
- /*
- * The kernel can't run on a non-flat stack if paravirt mode
- * is active. Rather than try to fixup the high bits of
- * ESP, bypass this code entirely. This may break DOSemu
- * and/or Wine support in a paravirt VM, although the option
- * is still available to implement the setting of the high
- * 16-bits in the INTERRUPT_RETURN paravirt-op.
- */
- cmpl $0, paravirt_ops+PARAVIRT_enabled
- jne restore_nocheck
-#endif
-
- /* If returning to userspace with 16bit stack,
- * try to fix the higher word of ESP, as the CPU
- * won't restore it.
- * This is an "official" bug of all the x86-compatible
- * CPUs, which we can try to work around to make
- * dosemu and wine happy. */
- movl PT_OLDESP(%esp), %eax
- movl %esp, %edx
- call patch_espfix_desc
- pushl $__ESPFIX_SS
- CFI_ADJUST_CFA_OFFSET 4
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- DISABLE_INTERRUPTS(CLBR_EAX)
- TRACE_IRQS_OFF
- lss (%esp), %esp
- CFI_ADJUST_CFA_OFFSET -8
- jmp restore_nocheck
- CFI_ENDPROC
-ENDPROC(system_call)
-
- # perform work that needs to be done immediately before resumption
- ALIGN
- RING0_PTREGS_FRAME # can't unwind into user space anyway
-work_pending:
- testb $_TIF_NEED_RESCHED, %cl
- jz work_notifysig
-work_resched:
- call schedule
- DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
- # setting need_resched or sigpending
- # between sampling and the iret
- TRACE_IRQS_OFF
- movl TI_flags(%ebp), %ecx
- andl $_TIF_WORK_MASK, %ecx # is there any work to be done other
- # than syscall tracing?
- jz restore_all
- testb $_TIF_NEED_RESCHED, %cl
- jnz work_resched
-
-work_notifysig: # deal with pending signals and
- # notify-resume requests
-#ifdef CONFIG_VM86
- testl $VM_MASK, PT_EFLAGS(%esp)
- movl %esp, %eax
- jne work_notifysig_v86 # returning to kernel-space or
- # vm86-space
- xorl %edx, %edx
- call do_notify_resume
- jmp resume_userspace_sig
-
- ALIGN
-work_notifysig_v86:
- pushl %ecx # save ti_flags for do_notify_resume
- CFI_ADJUST_CFA_OFFSET 4
- call save_v86_state # %eax contains pt_regs pointer
- popl %ecx
- CFI_ADJUST_CFA_OFFSET -4
- movl %eax, %esp
-#else
- movl %esp, %eax
-#endif
- xorl %edx, %edx
- call do_notify_resume
- jmp resume_userspace_sig
-END(work_pending)
-
- # perform syscall exit tracing
- ALIGN
-syscall_trace_entry:
- movl $-ENOSYS,PT_EAX(%esp)
- movl %esp, %eax
- xorl %edx,%edx
- call do_syscall_trace
- cmpl $0, %eax
- jne resume_userspace # ret != 0 -> running under PTRACE_SYSEMU,
- # so must skip actual syscall
- movl PT_ORIG_EAX(%esp), %eax
- cmpl $(nr_syscalls), %eax
- jnae syscall_call
- jmp syscall_exit
-END(syscall_trace_entry)
-
- # perform syscall exit tracing
- ALIGN
-syscall_exit_work:
- testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
- jz work_pending
- TRACE_IRQS_ON
- ENABLE_INTERRUPTS(CLBR_ANY) # could let do_syscall_trace() call
- # schedule() instead
- movl %esp, %eax
- movl $1, %edx
- call do_syscall_trace
- jmp resume_userspace
-END(syscall_exit_work)
- CFI_ENDPROC
-
- RING0_INT_FRAME # can't unwind into user space anyway
-syscall_fault:
- pushl %eax # save orig_eax
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- GET_THREAD_INFO(%ebp)
- movl $-EFAULT,PT_EAX(%esp)
- jmp resume_userspace
-END(syscall_fault)
-
-syscall_badsys:
- movl $-ENOSYS,PT_EAX(%esp)
- jmp resume_userspace
-END(syscall_badsys)
- CFI_ENDPROC
-
-#define FIXUP_ESPFIX_STACK \
- /* since we are on a wrong stack, we cant make it a C code :( */ \
- PER_CPU(gdt_page, %ebx); \
- GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \
- addl %esp, %eax; \
- pushl $__KERNEL_DS; \
- CFI_ADJUST_CFA_OFFSET 4; \
- pushl %eax; \
- CFI_ADJUST_CFA_OFFSET 4; \
- lss (%esp), %esp; \
- CFI_ADJUST_CFA_OFFSET -8;
-#define UNWIND_ESPFIX_STACK \
- movl %ss, %eax; \
- /* see if on espfix stack */ \
- cmpw $__ESPFIX_SS, %ax; \
- jne 27f; \
- movl $__KERNEL_DS, %eax; \
- movl %eax, %ds; \
- movl %eax, %es; \
- /* switch to normal stack */ \
- FIXUP_ESPFIX_STACK; \
-27:;
-
-/*
- * Build the entry stubs and pointer table with
- * some assembler magic.
- */
-.data
-ENTRY(interrupt)
-.text
-
-ENTRY(irq_entries_start)
- RING0_INT_FRAME
-vector=0
-.rept NR_IRQS
- ALIGN
- .if vector
- CFI_ADJUST_CFA_OFFSET -4
- .endif
-1: pushl $~(vector)
- CFI_ADJUST_CFA_OFFSET 4
- jmp common_interrupt
- .previous
- .long 1b
- .text
-vector=vector+1
-.endr
-END(irq_entries_start)
-
-.previous
-END(interrupt)
-.previous
-
-/*
- * the CPU automatically disables interrupts when executing an IRQ vector,
- * so IRQ-flags tracing has to follow that:
- */
- ALIGN
-common_interrupt:
- SAVE_ALL
- TRACE_IRQS_OFF
- movl %esp,%eax
- call do_IRQ
- jmp ret_from_intr
-ENDPROC(common_interrupt)
- CFI_ENDPROC
-
-#define BUILD_INTERRUPT(name, nr) \
-ENTRY(name) \
- RING0_INT_FRAME; \
- pushl $~(nr); \
- CFI_ADJUST_CFA_OFFSET 4; \
- SAVE_ALL; \
- TRACE_IRQS_OFF \
- movl %esp,%eax; \
- call smp_##name; \
- jmp ret_from_intr; \
- CFI_ENDPROC; \
-ENDPROC(name)
-
-/* The include is where all of the SMP etc. interrupts come from */
-#include "entry_arch.h"
-
-KPROBE_ENTRY(page_fault)
- RING0_EC_FRAME
- pushl $do_page_fault
- CFI_ADJUST_CFA_OFFSET 4
- ALIGN
-error_code:
- /* the function address is in %fs's slot on the stack */
- pushl %es
- CFI_ADJUST_CFA_OFFSET 4
- /*CFI_REL_OFFSET es, 0*/
- pushl %ds
- CFI_ADJUST_CFA_OFFSET 4
- /*CFI_REL_OFFSET ds, 0*/
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET eax, 0
- pushl %ebp
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET ebp, 0
- pushl %edi
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET edi, 0
- pushl %esi
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET esi, 0
- pushl %edx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET edx, 0
- pushl %ecx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET ecx, 0
- pushl %ebx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET ebx, 0
- cld
- pushl %fs
- CFI_ADJUST_CFA_OFFSET 4
- /*CFI_REL_OFFSET fs, 0*/
- movl $(__KERNEL_PERCPU), %ecx
- movl %ecx, %fs
- UNWIND_ESPFIX_STACK
- popl %ecx
- CFI_ADJUST_CFA_OFFSET -4
- /*CFI_REGISTER es, ecx*/
- movl PT_FS(%esp), %edi # get the function address
- movl PT_ORIG_EAX(%esp), %edx # get the error code
- movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
- mov %ecx, PT_FS(%esp)
- /*CFI_REL_OFFSET fs, ES*/
- movl $(__USER_DS), %ecx
- movl %ecx, %ds
- movl %ecx, %es
- movl %esp,%eax # pt_regs pointer
- call *%edi
- jmp ret_from_exception
- CFI_ENDPROC
-KPROBE_END(page_fault)
-
-ENTRY(coprocessor_error)
- RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_coprocessor_error
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(coprocessor_error)
-
-ENTRY(simd_coprocessor_error)
- RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_simd_coprocessor_error
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(simd_coprocessor_error)
-
-ENTRY(device_not_available)
- RING0_INT_FRAME
- pushl $-1 # mark this as an int
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- GET_CR0_INTO_EAX
- testl $0x4, %eax # EM (math emulation bit)
- jne device_not_available_emulate
- preempt_stop(CLBR_ANY)
- call math_state_restore
- jmp ret_from_exception
-device_not_available_emulate:
- pushl $0 # temporary storage for ORIG_EIP
- CFI_ADJUST_CFA_OFFSET 4
- call math_emulate
- addl $4, %esp
- CFI_ADJUST_CFA_OFFSET -4
- jmp ret_from_exception
- CFI_ENDPROC
-END(device_not_available)
-
-/*
- * Debug traps and NMI can happen at the one SYSENTER instruction
- * that sets up the real kernel stack. Check here, since we can't
- * allow the wrong stack to be used.
- *
- * "TSS_sysenter_esp0+12" is because the NMI/debug handler will have
- * already pushed 3 words if it hits on the sysenter instruction:
- * eflags, cs and eip.
- *
- * We just load the right stack, and push the three (known) values
- * by hand onto the new stack - while updating the return eip past
- * the instruction that would have done it for sysenter.
- */
-#define FIX_STACK(offset, ok, label) \
- cmpw $__KERNEL_CS,4(%esp); \
- jne ok; \
-label: \
- movl TSS_sysenter_esp0+offset(%esp),%esp; \
- CFI_DEF_CFA esp, 0; \
- CFI_UNDEFINED eip; \
- pushfl; \
- CFI_ADJUST_CFA_OFFSET 4; \
- pushl $__KERNEL_CS; \
- CFI_ADJUST_CFA_OFFSET 4; \
- pushl $sysenter_past_esp; \
- CFI_ADJUST_CFA_OFFSET 4; \
- CFI_REL_OFFSET eip, 0
-
-KPROBE_ENTRY(debug)
- RING0_INT_FRAME
- cmpl $sysenter_entry,(%esp)
- jne debug_stack_correct
- FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
-debug_stack_correct:
- pushl $-1 # mark this as an int
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- xorl %edx,%edx # error code 0
- movl %esp,%eax # pt_regs pointer
- call do_debug
- jmp ret_from_exception
- CFI_ENDPROC
-KPROBE_END(debug)
-
-/*
- * NMI is doubly nasty. It can happen _while_ we're handling
- * a debug fault, and the debug fault hasn't yet been able to
- * clear up the stack. So we first check whether we got an
- * NMI on the sysenter entry path, but after that we need to
- * check whether we got an NMI on the debug path where the debug
- * fault happened on the sysenter path.
- */
-KPROBE_ENTRY(nmi)
- RING0_INT_FRAME
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- movl %ss, %eax
- cmpw $__ESPFIX_SS, %ax
- popl %eax
- CFI_ADJUST_CFA_OFFSET -4
- je nmi_espfix_stack
- cmpl $sysenter_entry,(%esp)
- je nmi_stack_fixup
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- movl %esp,%eax
- /* Do not access memory above the end of our stack page,
- * it might not exist.
- */
- andl $(THREAD_SIZE-1),%eax
- cmpl $(THREAD_SIZE-20),%eax
- popl %eax
- CFI_ADJUST_CFA_OFFSET -4
- jae nmi_stack_correct
- cmpl $sysenter_entry,12(%esp)
- je nmi_debug_stack_check
-nmi_stack_correct:
- /* We have a RING0_INT_FRAME here */
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- xorl %edx,%edx # zero error code
- movl %esp,%eax # pt_regs pointer
- call do_nmi
- jmp restore_nocheck_notrace
- CFI_ENDPROC
-
-nmi_stack_fixup:
- RING0_INT_FRAME
- FIX_STACK(12,nmi_stack_correct, 1)
- jmp nmi_stack_correct
-
-nmi_debug_stack_check:
- /* We have a RING0_INT_FRAME here */
- cmpw $__KERNEL_CS,16(%esp)
- jne nmi_stack_correct
- cmpl $debug,(%esp)
- jb nmi_stack_correct
- cmpl $debug_esp_fix_insn,(%esp)
- ja nmi_stack_correct
- FIX_STACK(24,nmi_stack_correct, 1)
- jmp nmi_stack_correct
-
-nmi_espfix_stack:
- /* We have a RING0_INT_FRAME here.
- *
- * create the pointer to lss back
- */
- pushl %ss
- CFI_ADJUST_CFA_OFFSET 4
- pushl %esp
- CFI_ADJUST_CFA_OFFSET 4
- addw $4, (%esp)
- /* copy the iret frame of 12 bytes */
- .rept 3
- pushl 16(%esp)
- CFI_ADJUST_CFA_OFFSET 4
- .endr
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- FIXUP_ESPFIX_STACK # %eax == %esp
- xorl %edx,%edx # zero error code
- call do_nmi
- RESTORE_REGS
- lss 12+4(%esp), %esp # back to espfix stack
- CFI_ADJUST_CFA_OFFSET -24
-1: INTERRUPT_RETURN
- CFI_ENDPROC
-.section __ex_table,"a"
- .align 4
- .long 1b,iret_exc
-.previous
-KPROBE_END(nmi)
-
-#ifdef CONFIG_PARAVIRT
-ENTRY(native_iret)
-1: iret
-.section __ex_table,"a"
- .align 4
- .long 1b,iret_exc
-.previous
-END(native_iret)
-
-ENTRY(native_irq_enable_sysexit)
- sti
- sysexit
-END(native_irq_enable_sysexit)
-#endif
-
-KPROBE_ENTRY(int3)
- RING0_INT_FRAME
- pushl $-1 # mark this as an int
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- xorl %edx,%edx # zero error code
- movl %esp,%eax # pt_regs pointer
- call do_int3
- jmp ret_from_exception
- CFI_ENDPROC
-KPROBE_END(int3)
-
-ENTRY(overflow)
- RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_overflow
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(overflow)
-
-ENTRY(bounds)
- RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_bounds
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(bounds)
-
-ENTRY(invalid_op)
- RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_invalid_op
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(invalid_op)
-
-ENTRY(coprocessor_segment_overrun)
- RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_coprocessor_segment_overrun
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(coprocessor_segment_overrun)
-
-ENTRY(invalid_TSS)
- RING0_EC_FRAME
- pushl $do_invalid_TSS
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(invalid_TSS)
-
-ENTRY(segment_not_present)
- RING0_EC_FRAME
- pushl $do_segment_not_present
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(segment_not_present)
-
-ENTRY(stack_segment)
- RING0_EC_FRAME
- pushl $do_stack_segment
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(stack_segment)
-
-KPROBE_ENTRY(general_protection)
- RING0_EC_FRAME
- pushl $do_general_protection
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-KPROBE_END(general_protection)
-
-ENTRY(alignment_check)
- RING0_EC_FRAME
- pushl $do_alignment_check
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(alignment_check)
-
-ENTRY(divide_error)
- RING0_INT_FRAME
- pushl $0 # no error code
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_divide_error
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(divide_error)
-
-#ifdef CONFIG_X86_MCE
-ENTRY(machine_check)
- RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl machine_check_vector
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(machine_check)
-#endif
-
-ENTRY(spurious_interrupt_bug)
- RING0_INT_FRAME
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_spurious_interrupt_bug
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-END(spurious_interrupt_bug)
-
-ENTRY(kernel_thread_helper)
- pushl $0 # fake return address for unwinder
- CFI_STARTPROC
- movl %edx,%eax
- push %edx
- CFI_ADJUST_CFA_OFFSET 4
- call *%ebx
- push %eax
- CFI_ADJUST_CFA_OFFSET 4
- call do_exit
- CFI_ENDPROC
-ENDPROC(kernel_thread_helper)
-
-#ifdef CONFIG_XEN
-ENTRY(xen_hypervisor_callback)
- CFI_STARTPROC
- pushl $0
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- TRACE_IRQS_OFF
-
- /* Check to see if we got the event in the critical
- region in xen_iret_direct, after we've reenabled
- events and checked for pending events. This simulates
- iret instruction's behaviour where it delivers a
- pending interrupt when enabling interrupts. */
- movl PT_EIP(%esp),%eax
- cmpl $xen_iret_start_crit,%eax
- jb 1f
- cmpl $xen_iret_end_crit,%eax
- jae 1f
-
- call xen_iret_crit_fixup
-
-1: mov %esp, %eax
- call xen_evtchn_do_upcall
- jmp ret_from_intr
- CFI_ENDPROC
-ENDPROC(xen_hypervisor_callback)
-
-# Hypervisor uses this for application faults while it executes.
-# We get here for two reasons:
-# 1. Fault while reloading DS, ES, FS or GS
-# 2. Fault while executing IRET
-# Category 1 we fix up by reattempting the load, and zeroing the segment
-# register if the load fails.
-# Category 2 we fix up by jumping to do_iret_error. We cannot use the
-# normal Linux return path in this case because if we use the IRET hypercall
-# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
-# We distinguish between categories by maintaining a status value in EAX.
-ENTRY(xen_failsafe_callback)
- CFI_STARTPROC
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- movl $1,%eax
-1: mov 4(%esp),%ds
-2: mov 8(%esp),%es
-3: mov 12(%esp),%fs
-4: mov 16(%esp),%gs
- testl %eax,%eax
- popl %eax
- CFI_ADJUST_CFA_OFFSET -4
- lea 16(%esp),%esp
- CFI_ADJUST_CFA_OFFSET -16
- jz 5f
- addl $16,%esp
- jmp iret_exc # EAX != 0 => Category 2 (Bad IRET)
-5: pushl $0 # EAX == 0 => Category 1 (Bad segment)
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- jmp ret_from_exception
- CFI_ENDPROC
-
-.section .fixup,"ax"
-6: xorl %eax,%eax
- movl %eax,4(%esp)
- jmp 1b
-7: xorl %eax,%eax
- movl %eax,8(%esp)
- jmp 2b
-8: xorl %eax,%eax
- movl %eax,12(%esp)
- jmp 3b
-9: xorl %eax,%eax
- movl %eax,16(%esp)
- jmp 4b
-.previous
-.section __ex_table,"a"
- .align 4
- .long 1b,6b
- .long 2b,7b
- .long 3b,8b
- .long 4b,9b
-.previous
-ENDPROC(xen_failsafe_callback)
-
-#endif /* CONFIG_XEN */
-
-.section .rodata,"a"
-#include "syscall_table.S"
-
-syscall_table_size=(.-sys_call_table)
diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S
deleted file mode 100644
index 8f0382161c9..00000000000
--- a/arch/i386/kernel/head.S
+++ /dev/null
@@ -1,578 +0,0 @@
-/*
- * linux/arch/i386/kernel/head.S -- the 32-bit startup code.
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * Enhanced CPU detection and feature setting code by Mike Jagdis
- * and Martin Mares, November 1997.
- */
-
-.text
-#include <linux/threads.h>
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/desc.h>
-#include <asm/cache.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-#include <asm/setup.h>
-
-/*
- * References to members of the new_cpu_data structure.
- */
-
-#define X86 new_cpu_data+CPUINFO_x86
-#define X86_VENDOR new_cpu_data+CPUINFO_x86_vendor
-#define X86_MODEL new_cpu_data+CPUINFO_x86_model
-#define X86_MASK new_cpu_data+CPUINFO_x86_mask
-#define X86_HARD_MATH new_cpu_data+CPUINFO_hard_math
-#define X86_CPUID new_cpu_data+CPUINFO_cpuid_level
-#define X86_CAPABILITY new_cpu_data+CPUINFO_x86_capability
-#define X86_VENDOR_ID new_cpu_data+CPUINFO_x86_vendor_id
-
-/*
- * This is how much memory *in addition to the memory covered up to
- * and including _end* we need mapped initially.
- * We need:
- * - one bit for each possible page, but only in low memory, which means
- * 2^32/4096/8 = 128K worst case (4G/4G split.)
- * - enough space to map all low memory, which means
- * (2^32/4096) / 1024 pages (worst case, non PAE)
- * (2^32/4096) / 512 + 4 pages (worst case for PAE)
- * - a few pages for allocator use before the kernel pagetable has
- * been set up
- *
- * Modulo rounding, each megabyte assigned here requires a kilobyte of
- * memory, which is currently unreclaimed.
- *
- * This should be a multiple of a page.
- */
-LOW_PAGES = 1<<(32-PAGE_SHIFT_asm)
-
-#if PTRS_PER_PMD > 1
-PAGE_TABLE_SIZE = (LOW_PAGES / PTRS_PER_PMD) + PTRS_PER_PGD
-#else
-PAGE_TABLE_SIZE = (LOW_PAGES / PTRS_PER_PGD)
-#endif
-BOOTBITMAP_SIZE = LOW_PAGES / 8
-ALLOCATOR_SLOP = 4
-
-INIT_MAP_BEYOND_END = BOOTBITMAP_SIZE + (PAGE_TABLE_SIZE + ALLOCATOR_SLOP)*PAGE_SIZE_asm
-
-/*
- * 32-bit kernel entrypoint; only used by the boot CPU. On entry,
- * %esi points to the real-mode code as a 32-bit pointer.
- * CS and DS must be 4 GB flat segments, but we don't depend on
- * any particular GDT layout, because we load our own as soon as we
- * can.
- */
-.section .text.head,"ax",@progbits
-ENTRY(startup_32)
-
-/*
- * Set segments to known values.
- */
- cld
- lgdt boot_gdt_descr - __PAGE_OFFSET
- movl $(__BOOT_DS),%eax
- movl %eax,%ds
- movl %eax,%es
- movl %eax,%fs
- movl %eax,%gs
-
-/*
- * Clear BSS first so that there are no surprises...
- * No need to cld as DF is already clear from cld above...
- */
- xorl %eax,%eax
- movl $__bss_start - __PAGE_OFFSET,%edi
- movl $__bss_stop - __PAGE_OFFSET,%ecx
- subl %edi,%ecx
- shrl $2,%ecx
- rep ; stosl
-/*
- * Copy bootup parameters out of the way.
- * Note: %esi still has the pointer to the real-mode data.
- * With the kexec as boot loader, parameter segment might be loaded beyond
- * kernel image and might not even be addressable by early boot page tables.
- * (kexec on panic case). Hence copy out the parameters before initializing
- * page tables.
- */
- movl $(boot_params - __PAGE_OFFSET),%edi
- movl $(PARAM_SIZE/4),%ecx
- cld
- rep
- movsl
- movl boot_params - __PAGE_OFFSET + NEW_CL_POINTER,%esi
- andl %esi,%esi
- jnz 2f # New command line protocol
- cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR
- jne 1f
- movzwl OLD_CL_OFFSET,%esi
- addl $(OLD_CL_BASE_ADDR),%esi
-2:
- movl $(boot_command_line - __PAGE_OFFSET),%edi
- movl $(COMMAND_LINE_SIZE/4),%ecx
- rep
- movsl
-1:
-
-/*
- * Initialize page tables. This creates a PDE and a set of page
- * tables, which are located immediately beyond _end. The variable
- * init_pg_tables_end is set up to point to the first "safe" location.
- * Mappings are created both at virtual address 0 (identity mapping)
- * and PAGE_OFFSET for up to _end+sizeof(page tables)+INIT_MAP_BEYOND_END.
- *
- * Warning: don't use %esi or the stack in this code. However, %esp
- * can be used as a GPR if you really need it...
- */
-page_pde_offset = (__PAGE_OFFSET >> 20);
-
- movl $(pg0 - __PAGE_OFFSET), %edi
- movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
- movl $0x007, %eax /* 0x007 = PRESENT+RW+USER */
-10:
- leal 0x007(%edi),%ecx /* Create PDE entry */
- movl %ecx,(%edx) /* Store identity PDE entry */
- movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */
- addl $4,%edx
- movl $1024, %ecx
-11:
- stosl
- addl $0x1000,%eax
- loop 11b
- /* End condition: we must map up to and including INIT_MAP_BEYOND_END */
- /* bytes beyond the end of our own page tables; the +0x007 is the attribute bits */
- leal (INIT_MAP_BEYOND_END+0x007)(%edi),%ebp
- cmpl %ebp,%eax
- jb 10b
- movl %edi,(init_pg_tables_end - __PAGE_OFFSET)
-
- xorl %ebx,%ebx /* This is the boot CPU (BSP) */
- jmp 3f
-/*
- * Non-boot CPU entry point; entered from trampoline.S
- * We can't lgdt here, because lgdt itself uses a data segment, but
- * we know the trampoline has already loaded the boot_gdt for us.
- *
- * If cpu hotplug is not supported then this code can go in init section
- * which will be freed later
- */
-
-#ifndef CONFIG_HOTPLUG_CPU
-.section .init.text,"ax",@progbits
-#endif
-
- /* Do an early initialization of the fixmap area */
- movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
- movl $(swapper_pg_pmd - __PAGE_OFFSET), %eax
- addl $0x007, %eax /* 0x007 = PRESENT+RW+USER */
- movl %eax, 4092(%edx)
-
-#ifdef CONFIG_SMP
-ENTRY(startup_32_smp)
- cld
- movl $(__BOOT_DS),%eax
- movl %eax,%ds
- movl %eax,%es
- movl %eax,%fs
- movl %eax,%gs
-
-/*
- * New page tables may be in 4Mbyte page mode and may
- * be using the global pages.
- *
- * NOTE! If we are on a 486 we may have no cr4 at all!
- * So we do not try to touch it unless we really have
- * some bits in it to set. This won't work if the BSP
- * implements cr4 but this AP does not -- very unlikely
- * but be warned! The same applies to the pse feature
- * if not equally supported. --macro
- *
- * NOTE! We have to correct for the fact that we're
- * not yet offset PAGE_OFFSET..
- */
-#define cr4_bits mmu_cr4_features-__PAGE_OFFSET
- movl cr4_bits,%edx
- andl %edx,%edx
- jz 6f
- movl %cr4,%eax # Turn on paging options (PSE,PAE,..)
- orl %edx,%eax
- movl %eax,%cr4
-
- btl $5, %eax # check if PAE is enabled
- jnc 6f
-
- /* Check if extended functions are implemented */
- movl $0x80000000, %eax
- cpuid
- cmpl $0x80000000, %eax
- jbe 6f
- mov $0x80000001, %eax
- cpuid
- /* Execute Disable bit supported? */
- btl $20, %edx
- jnc 6f
-
- /* Setup EFER (Extended Feature Enable Register) */
- movl $0xc0000080, %ecx
- rdmsr
-
- btsl $11, %eax
- /* Make changes effective */
- wrmsr
-
-6:
- /* This is a secondary processor (AP) */
- xorl %ebx,%ebx
- incl %ebx
-
-#endif /* CONFIG_SMP */
-3:
-
-/*
- * Enable paging
- */
- movl $swapper_pg_dir-__PAGE_OFFSET,%eax
- movl %eax,%cr3 /* set the page table pointer.. */
- movl %cr0,%eax
- orl $0x80000000,%eax
- movl %eax,%cr0 /* ..and set paging (PG) bit */
- ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */
-1:
- /* Set up the stack pointer */
- lss stack_start,%esp
-
-/*
- * Initialize eflags. Some BIOS's leave bits like NT set. This would
- * confuse the debugger if this code is traced.
- * XXX - best to initialize before switching to protected mode.
- */
- pushl $0
- popfl
-
-#ifdef CONFIG_SMP
- andl %ebx,%ebx
- jz 1f /* Initial CPU cleans BSS */
- jmp checkCPUtype
-1:
-#endif /* CONFIG_SMP */
-
-/*
- * start system 32-bit setup. We need to re-do some of the things done
- * in 16-bit mode for the "real" operations.
- */
- call setup_idt
-
-checkCPUtype:
-
- movl $-1,X86_CPUID # -1 for no CPUID initially
-
-/* check if it is 486 or 386. */
-/*
- * XXX - this does a lot of unnecessary setup. Alignment checks don't
- * apply at our cpl of 0 and the stack ought to be aligned already, and
- * we don't need to preserve eflags.
- */
-
- movb $3,X86 # at least 386
- pushfl # push EFLAGS
- popl %eax # get EFLAGS
- movl %eax,%ecx # save original EFLAGS
- xorl $0x240000,%eax # flip AC and ID bits in EFLAGS
- pushl %eax # copy to EFLAGS
- popfl # set EFLAGS
- pushfl # get new EFLAGS
- popl %eax # put it in eax
- xorl %ecx,%eax # change in flags
- pushl %ecx # restore original EFLAGS
- popfl
- testl $0x40000,%eax # check if AC bit changed
- je is386
-
- movb $4,X86 # at least 486
- testl $0x200000,%eax # check if ID bit changed
- je is486
-
- /* get vendor info */
- xorl %eax,%eax # call CPUID with 0 -> return vendor ID
- cpuid
- movl %eax,X86_CPUID # save CPUID level
- movl %ebx,X86_VENDOR_ID # lo 4 chars
- movl %edx,X86_VENDOR_ID+4 # next 4 chars
- movl %ecx,X86_VENDOR_ID+8 # last 4 chars
-
- orl %eax,%eax # do we have processor info as well?
- je is486
-
- movl $1,%eax # Use the CPUID instruction to get CPU type
- cpuid
- movb %al,%cl # save reg for future use
- andb $0x0f,%ah # mask processor family
- movb %ah,X86
- andb $0xf0,%al # mask model
- shrb $4,%al
- movb %al,X86_MODEL
- andb $0x0f,%cl # mask mask revision
- movb %cl,X86_MASK
- movl %edx,X86_CAPABILITY
-
-is486: movl $0x50022,%ecx # set AM, WP, NE and MP
- jmp 2f
-
-is386: movl $2,%ecx # set MP
-2: movl %cr0,%eax
- andl $0x80000011,%eax # Save PG,PE,ET
- orl %ecx,%eax
- movl %eax,%cr0
-
- call check_x87
- lgdt early_gdt_descr
- lidt idt_descr
- ljmp $(__KERNEL_CS),$1f
-1: movl $(__KERNEL_DS),%eax # reload all the segment registers
- movl %eax,%ss # after changing gdt.
- movl %eax,%fs # gets reset once there's real percpu
-
- movl $(__USER_DS),%eax # DS/ES contains default USER segment
- movl %eax,%ds
- movl %eax,%es
-
- xorl %eax,%eax # Clear GS and LDT
- movl %eax,%gs
- lldt %ax
-
- cld # gcc2 wants the direction flag cleared at all times
- pushl $0 # fake return address for unwinder
-#ifdef CONFIG_SMP
- movb ready, %cl
- movb $1, ready
- cmpb $0,%cl # the first CPU calls start_kernel
- je 1f
- movl $(__KERNEL_PERCPU), %eax
- movl %eax,%fs # set this cpu's percpu
- jmp initialize_secondary # all other CPUs call initialize_secondary
-1:
-#endif /* CONFIG_SMP */
- jmp start_kernel
-
-/*
- * We depend on ET to be correct. This checks for 287/387.
- */
-check_x87:
- movb $0,X86_HARD_MATH
- clts
- fninit
- fstsw %ax
- cmpb $0,%al
- je 1f
- movl %cr0,%eax /* no coprocessor: have to set bits */
- xorl $4,%eax /* set EM */
- movl %eax,%cr0
- ret
- ALIGN
-1: movb $1,X86_HARD_MATH
- .byte 0xDB,0xE4 /* fsetpm for 287, ignored by 387 */
- ret
-
-/*
- * setup_idt
- *
- * sets up a idt with 256 entries pointing to
- * ignore_int, interrupt gates. It doesn't actually load
- * idt - that can be done only after paging has been enabled
- * and the kernel moved to PAGE_OFFSET. Interrupts
- * are enabled elsewhere, when we can be relatively
- * sure everything is ok.
- *
- * Warning: %esi is live across this function.
- */
-setup_idt:
- lea ignore_int,%edx
- movl $(__KERNEL_CS << 16),%eax
- movw %dx,%ax /* selector = 0x0010 = cs */
- movw $0x8E00,%dx /* interrupt gate - dpl=0, present */
-
- lea idt_table,%edi
- mov $256,%ecx
-rp_sidt:
- movl %eax,(%edi)
- movl %edx,4(%edi)
- addl $8,%edi
- dec %ecx
- jne rp_sidt
-
-.macro set_early_handler handler,trapno
- lea \handler,%edx
- movl $(__KERNEL_CS << 16),%eax
- movw %dx,%ax
- movw $0x8E00,%dx /* interrupt gate - dpl=0, present */
- lea idt_table,%edi
- movl %eax,8*\trapno(%edi)
- movl %edx,8*\trapno+4(%edi)
-.endm
-
- set_early_handler handler=early_divide_err,trapno=0
- set_early_handler handler=early_illegal_opcode,trapno=6
- set_early_handler handler=early_protection_fault,trapno=13
- set_early_handler handler=early_page_fault,trapno=14
-
- ret
-
-early_divide_err:
- xor %edx,%edx
- pushl $0 /* fake errcode */
- jmp early_fault
-
-early_illegal_opcode:
- movl $6,%edx
- pushl $0 /* fake errcode */
- jmp early_fault
-
-early_protection_fault:
- movl $13,%edx
- jmp early_fault
-
-early_page_fault:
- movl $14,%edx
- jmp early_fault
-
-early_fault:
- cld
-#ifdef CONFIG_PRINTK
- movl $(__KERNEL_DS),%eax
- movl %eax,%ds
- movl %eax,%es
- cmpl $2,early_recursion_flag
- je hlt_loop
- incl early_recursion_flag
- movl %cr2,%eax
- pushl %eax
- pushl %edx /* trapno */
- pushl $fault_msg
-#ifdef CONFIG_EARLY_PRINTK
- call early_printk
-#else
- call printk
-#endif
-#endif
-hlt_loop:
- hlt
- jmp hlt_loop
-
-/* This is the default interrupt "handler" :-) */
- ALIGN
-ignore_int:
- cld
-#ifdef CONFIG_PRINTK
- pushl %eax
- pushl %ecx
- pushl %edx
- pushl %es
- pushl %ds
- movl $(__KERNEL_DS),%eax
- movl %eax,%ds
- movl %eax,%es
- cmpl $2,early_recursion_flag
- je hlt_loop
- incl early_recursion_flag
- pushl 16(%esp)
- pushl 24(%esp)
- pushl 32(%esp)
- pushl 40(%esp)
- pushl $int_msg
-#ifdef CONFIG_EARLY_PRINTK
- call early_printk
-#else
- call printk
-#endif
- addl $(5*4),%esp
- popl %ds
- popl %es
- popl %edx
- popl %ecx
- popl %eax
-#endif
- iret
-
-.section .text
-/*
- * Real beginning of normal "text" segment
- */
-ENTRY(stext)
-ENTRY(_stext)
-
-/*
- * BSS section
- */
-.section ".bss.page_aligned","wa"
- .align PAGE_SIZE_asm
-ENTRY(swapper_pg_dir)
- .fill 1024,4,0
-ENTRY(swapper_pg_pmd)
- .fill 1024,4,0
-ENTRY(empty_zero_page)
- .fill 4096,1,0
-
-/*
- * This starts the data section.
- */
-.data
-ENTRY(stack_start)
- .long init_thread_union+THREAD_SIZE
- .long __BOOT_DS
-
-ready: .byte 0
-
-early_recursion_flag:
- .long 0
-
-int_msg:
- .asciz "Unknown interrupt or fault at EIP %p %p %p\n"
-
-fault_msg:
- .ascii "Int %d: CR2 %p err %p EIP %p CS %p flags %p\n"
- .asciz "Stack: %p %p %p %p %p %p %p %p\n"
-
-#include "../xen/xen-head.S"
-
-/*
- * The IDT and GDT 'descriptors' are a strange 48-bit object
- * only used by the lidt and lgdt instructions. They are not
- * like usual segment descriptors - they consist of a 16-bit
- * segment size, and 32-bit linear address value:
- */
-
-.globl boot_gdt_descr
-.globl idt_descr
-
- ALIGN
-# early boot GDT descriptor (must use 1:1 address mapping)
- .word 0 # 32 bit align gdt_desc.address
-boot_gdt_descr:
- .word __BOOT_DS+7
- .long boot_gdt - __PAGE_OFFSET
-
- .word 0 # 32-bit align idt_desc.address
-idt_descr:
- .word IDT_ENTRIES*8-1 # idt contains 256 entries
- .long idt_table
-
-# boot GDT descriptor (later on used by CPU#0):
- .word 0 # 32 bit align gdt_desc.address
-ENTRY(early_gdt_descr)
- .word GDT_ENTRIES*8-1
- .long per_cpu__gdt_page /* Overwritten for secondary CPUs */
-
-/*
- * The boot_gdt must mirror the equivalent in setup.S and is
- * used only for booting.
- */
- .align L1_CACHE_BYTES
-ENTRY(boot_gdt)
- .fill GDT_ENTRY_BOOT_CS,8,0
- .quad 0x00cf9a000000ffff /* kernel 4GB code at 0x00000000 */
- .quad 0x00cf92000000ffff /* kernel 4GB data at 0x00000000 */
diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c
deleted file mode 100644
index f5dd85656c1..00000000000
--- a/arch/i386/kernel/signal.c
+++ /dev/null
@@ -1,667 +0,0 @@
-/*
- * linux/arch/i386/kernel/signal.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
- * 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/personality.h>
-#include <linux/suspend.h>
-#include <linux/ptrace.h>
-#include <linux/elf.h>
-#include <linux/binfmts.h>
-#include <asm/processor.h>
-#include <asm/ucontext.h>
-#include <asm/uaccess.h>
-#include <asm/i387.h>
-#include "sigframe.h"
-
-#define DEBUG_SIG 0
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(int history0, int history1, old_sigset_t mask)
-{
- mask &= _BLOCKABLE;
- spin_lock_irq(&current->sighand->siglock);
- current->saved_sigmask = current->blocked;
- siginitset(&current->blocked, mask);
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
-
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- set_thread_flag(TIF_RESTORE_SIGMASK);
- return -ERESTARTNOHAND;
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction __user *act,
- struct old_sigaction __user *oact)
-{
- struct k_sigaction new_ka, old_ka;
- int ret;
-
- if (act) {
- old_sigset_t mask;
- if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
- __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
- __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
- return -EFAULT;
- __get_user(new_ka.sa.sa_flags, &act->sa_flags);
- __get_user(mask, &act->sa_mask);
- siginitset(&new_ka.sa.sa_mask, mask);
- }
-
- ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
- if (!ret && oact) {
- if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
- __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
- __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
- return -EFAULT;
- __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
- __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
- }
-
- return ret;
-}
-
-asmlinkage int
-sys_sigaltstack(unsigned long ebx)
-{
- /* This is needed to make gcc realize it doesn't own the "struct pt_regs" */
- struct pt_regs *regs = (struct pt_regs *)&ebx;
- const stack_t __user *uss = (const stack_t __user *)ebx;
- stack_t __user *uoss = (stack_t __user *)regs->ecx;
-
- return do_sigaltstack(uss, uoss, regs->esp);
-}
-
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax)
-{
- unsigned int err = 0;
-
- /* Always make any pending restarted system calls return -EINTR */
- current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-#define COPY(x) err |= __get_user(regs->x, &sc->x)
-
-#define COPY_SEG(seg) \
- { unsigned short tmp; \
- err |= __get_user(tmp, &sc->seg); \
- regs->x##seg = tmp; }
-
-#define COPY_SEG_STRICT(seg) \
- { unsigned short tmp; \
- err |= __get_user(tmp, &sc->seg); \
- regs->x##seg = tmp|3; }
-
-#define GET_SEG(seg) \
- { unsigned short tmp; \
- err |= __get_user(tmp, &sc->seg); \
- loadsegment(seg,tmp); }
-
-#define FIX_EFLAGS (X86_EFLAGS_AC | X86_EFLAGS_RF | \
- X86_EFLAGS_OF | X86_EFLAGS_DF | \
- X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \
- X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF)
-
- GET_SEG(gs);
- COPY_SEG(fs);
- COPY_SEG(es);
- COPY_SEG(ds);
- COPY(edi);
- COPY(esi);
- COPY(ebp);
- COPY(esp);
- COPY(ebx);
- COPY(edx);
- COPY(ecx);
- COPY(eip);
- COPY_SEG_STRICT(cs);
- COPY_SEG_STRICT(ss);
-
- {
- unsigned int tmpflags;
- err |= __get_user(tmpflags, &sc->eflags);
- regs->eflags = (regs->eflags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
- regs->orig_eax = -1; /* disable syscall checks */
- }
-
- {
- struct _fpstate __user * buf;
- err |= __get_user(buf, &sc->fpstate);
- if (buf) {
- if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
- goto badframe;
- err |= restore_i387(buf);
- } else {
- struct task_struct *me = current;
- if (used_math()) {
- clear_fpu(me);
- clear_used_math();
- }
- }
- }
-
- err |= __get_user(*peax, &sc->eax);
- return err;
-
-badframe:
- return 1;
-}
-
-asmlinkage int sys_sigreturn(unsigned long __unused)
-{
- struct pt_regs *regs = (struct pt_regs *) &__unused;
- struct sigframe __user *frame = (struct sigframe __user *)(regs->esp - 8);
- sigset_t set;
- int eax;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
- if (__get_user(set.sig[0], &frame->sc.oldmask)
- || (_NSIG_WORDS > 1
- && __copy_from_user(&set.sig[1], &frame->extramask,
- sizeof(frame->extramask))))
- goto badframe;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(&current->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
-
- if (restore_sigcontext(regs, &frame->sc, &eax))
- goto badframe;
- return eax;
-
-badframe:
- if (show_unhandled_signals && printk_ratelimit())
- printk("%s%s[%d] bad frame in sigreturn frame:%p eip:%lx"
- " esp:%lx oeax:%lx\n",
- current->pid > 1 ? KERN_INFO : KERN_EMERG,
- current->comm, current->pid, frame, regs->eip,
- regs->esp, regs->orig_eax);
-
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(unsigned long __unused)
-{
- struct pt_regs *regs = (struct pt_regs *) &__unused;
- struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(regs->esp - 4);
- sigset_t set;
- int eax;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
- if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
- goto badframe;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(&current->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
-
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &eax))
- goto badframe;
-
- if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->esp) == -EFAULT)
- goto badframe;
-
- return eax;
-
-badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-/*
- * Set up a signal frame.
- */
-
-static int
-setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
- struct pt_regs *regs, unsigned long mask)
-{
- int tmp, err = 0;
-
- err |= __put_user(regs->xfs, (unsigned int __user *)&sc->fs);
- savesegment(gs, tmp);
- err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
-
- err |= __put_user(regs->xes, (unsigned int __user *)&sc->es);
- err |= __put_user(regs->xds, (unsigned int __user *)&sc->ds);
- err |= __put_user(regs->edi, &sc->edi);
- err |= __put_user(regs->esi, &sc->esi);
- err |= __put_user(regs->ebp, &sc->ebp);
- err |= __put_user(regs->esp, &sc->esp);
- err |= __put_user(regs->ebx, &sc->ebx);
- err |= __put_user(regs->edx, &sc->edx);
- err |= __put_user(regs->ecx, &sc->ecx);
- err |= __put_user(regs->eax, &sc->eax);
- err |= __put_user(current->thread.trap_no, &sc->trapno);
- err |= __put_user(current->thread.error_code, &sc->err);
- err |= __put_user(regs->eip, &sc->eip);
- err |= __put_user(regs->xcs, (unsigned int __user *)&sc->cs);
- err |= __put_user(regs->eflags, &sc->eflags);
- err |= __put_user(regs->esp, &sc->esp_at_signal);
- err |= __put_user(regs->xss, (unsigned int __user *)&sc->ss);
-
- tmp = save_i387(fpstate);
- if (tmp < 0)
- err = 1;
- else
- err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
-
- /* non-iBCS2 extensions.. */
- err |= __put_user(mask, &sc->oldmask);
- err |= __put_user(current->thread.cr2, &sc->cr2);
-
- return err;
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
-{
- unsigned long esp;
-
- /* Default to using normal stack */
- esp = regs->esp;
-
- /* This is the X/Open sanctioned signal stack switching. */
- if (ka->sa.sa_flags & SA_ONSTACK) {
- if (sas_ss_flags(esp) == 0)
- esp = current->sas_ss_sp + current->sas_ss_size;
- }
-
- /* This is the legacy signal stack switching. */
- else if ((regs->xss & 0xffff) != __USER_DS &&
- !(ka->sa.sa_flags & SA_RESTORER) &&
- ka->sa.sa_restorer) {
- esp = (unsigned long) ka->sa.sa_restorer;
- }
-
- esp -= frame_size;
- /* Align the stack pointer according to the i386 ABI,
- * i.e. so that on function entry ((sp + 4) & 15) == 0. */
- esp = ((esp + 4) & -16ul) - 4;
- return (void __user *) esp;
-}
-
-/* These symbols are defined with the addresses in the vsyscall page.
- See vsyscall-sigreturn.S. */
-extern void __user __kernel_sigreturn;
-extern void __user __kernel_rt_sigreturn;
-
-static int setup_frame(int sig, struct k_sigaction *ka,
- sigset_t *set, struct pt_regs * regs)
-{
- void __user *restorer;
- struct sigframe __user *frame;
- int err = 0;
- int usig;
-
- frame = get_sigframe(ka, regs, sizeof(*frame));
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
-
- usig = current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig;
-
- err = __put_user(usig, &frame->sig);
- if (err)
- goto give_sigsegv;
-
- err = setup_sigcontext(&frame->sc, &frame->fpstate, regs, set->sig[0]);
- if (err)
- goto give_sigsegv;
-
- if (_NSIG_WORDS > 1) {
- err = __copy_to_user(&frame->extramask, &set->sig[1],
- sizeof(frame->extramask));
- if (err)
- goto give_sigsegv;
- }
-
- if (current->binfmt->hasvdso)
- restorer = (void *)VDSO_SYM(&__kernel_sigreturn);
- else
- restorer = (void *)&frame->retcode;
- if (ka->sa.sa_flags & SA_RESTORER)
- restorer = ka->sa.sa_restorer;
-
- /* Set up to return from userspace. */
- err |= __put_user(restorer, &frame->pretcode);
-
- /*
- * This is popl %eax ; movl $,%eax ; int $0x80
- *
- * WE DO NOT USE IT ANY MORE! It's only left here for historical
- * reasons and because gdb uses it as a signature to notice
- * signal handler stack frames.
- */
- err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
- err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
- err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
-
- if (err)
- goto give_sigsegv;
-
- /* Set up registers for signal handler */
- regs->esp = (unsigned long) frame;
- regs->eip = (unsigned long) ka->sa.sa_handler;
- regs->eax = (unsigned long) sig;
- regs->edx = (unsigned long) 0;
- regs->ecx = (unsigned long) 0;
-
- set_fs(USER_DS);
- regs->xds = __USER_DS;
- regs->xes = __USER_DS;
- regs->xss = __USER_DS;
- regs->xcs = __USER_CS;
-
- /*
- * Clear TF when entering the signal handler, but
- * notify any tracer that was single-stepping it.
- * The tracer may want to single-step inside the
- * handler too.
- */
- regs->eflags &= ~TF_MASK;
- if (test_thread_flag(TIF_SINGLESTEP))
- ptrace_notify(SIGTRAP);
-
-#if DEBUG_SIG
- printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
- current->comm, current->pid, frame, regs->eip, frame->pretcode);
-#endif
-
- return 0;
-
-give_sigsegv:
- force_sigsegv(sig, current);
- return -EFAULT;
-}
-
-static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs * regs)
-{
- void __user *restorer;
- struct rt_sigframe __user *frame;
- int err = 0;
- int usig;
-
- frame = get_sigframe(ka, regs, sizeof(*frame));
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
-
- usig = current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig;
-
- err |= __put_user(usig, &frame->sig);
- err |= __put_user(&frame->info, &frame->pinfo);
- err |= __put_user(&frame->uc, &frame->puc);
- err |= copy_siginfo_to_user(&frame->info, info);
- if (err)
- goto give_sigsegv;
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(0, &frame->uc.uc_link);
- err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
- err |= __put_user(sas_ss_flags(regs->esp),
- &frame->uc.uc_stack.ss_flags);
- err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
- err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
- regs, set->sig[0]);
- err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
- if (err)
- goto give_sigsegv;
-
- /* Set up to return from userspace. */
- restorer = (void *)VDSO_SYM(&__kernel_rt_sigreturn);
- if (ka->sa.sa_flags & SA_RESTORER)
- restorer = ka->sa.sa_restorer;
- err |= __put_user(restorer, &frame->pretcode);
-
- /*
- * This is movl $,%eax ; int $0x80
- *
- * WE DO NOT USE IT ANY MORE! It's only left here for historical
- * reasons and because gdb uses it as a signature to notice
- * signal handler stack frames.
- */
- err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
- err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1));
- err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
-
- if (err)
- goto give_sigsegv;
-
- /* Set up registers for signal handler */
- regs->esp = (unsigned long) frame;
- regs->eip = (unsigned long) ka->sa.sa_handler;
- regs->eax = (unsigned long) usig;
- regs->edx = (unsigned long) &frame->info;
- regs->ecx = (unsigned long) &frame->uc;
-
- set_fs(USER_DS);
- regs->xds = __USER_DS;
- regs->xes = __USER_DS;
- regs->xss = __USER_DS;
- regs->xcs = __USER_CS;
-
- /*
- * Clear TF when entering the signal handler, but
- * notify any tracer that was single-stepping it.
- * The tracer may want to single-step inside the
- * handler too.
- */
- regs->eflags &= ~TF_MASK;
- if (test_thread_flag(TIF_SINGLESTEP))
- ptrace_notify(SIGTRAP);
-
-#if DEBUG_SIG
- printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
- current->comm, current->pid, frame, regs->eip, frame->pretcode);
-#endif
-
- return 0;
-
-give_sigsegv:
- force_sigsegv(sig, current);
- return -EFAULT;
-}
-
-/*
- * OK, we're invoking a handler
- */
-
-static int
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
- sigset_t *oldset, struct pt_regs * regs)
-{
- int ret;
-
- /* Are we from a system call? */
- if (regs->orig_eax >= 0) {
- /* If so, check system call restarting.. */
- switch (regs->eax) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- regs->eax = -EINTR;
- break;
-
- case -ERESTARTSYS:
- if (!(ka->sa.sa_flags & SA_RESTART)) {
- regs->eax = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- regs->eax = regs->orig_eax;
- regs->eip -= 2;
- }
- }
-
- /*
- * If TF is set due to a debugger (PT_DTRACE), clear the TF flag so
- * that register information in the sigcontext is correct.
- */
- if (unlikely(regs->eflags & TF_MASK)
- && likely(current->ptrace & PT_DTRACE)) {
- current->ptrace &= ~PT_DTRACE;
- regs->eflags &= ~TF_MASK;
- }
-
- /* Set up the stack frame */
- if (ka->sa.sa_flags & SA_SIGINFO)
- ret = setup_rt_frame(sig, ka, info, oldset, regs);
- else
- ret = setup_frame(sig, ka, oldset, regs);
-
- if (ret == 0) {
- spin_lock_irq(&current->sighand->siglock);
- sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
- if (!(ka->sa.sa_flags & SA_NODEFER))
- sigaddset(&current->blocked,sig);
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
- }
-
- return ret;
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- */
-static void fastcall do_signal(struct pt_regs *regs)
-{
- siginfo_t info;
- int signr;
- struct k_sigaction ka;
- sigset_t *oldset;
-
- /*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
- * if so. vm86 regs switched out by assembly code
- * before reaching here, so testing against kernel
- * CS suffices.
- */
- if (!user_mode(regs))
- return;
-
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- oldset = &current->saved_sigmask;
- else
- oldset = &current->blocked;
-
- signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- /* Reenable any watchpoints before delivering the
- * signal to user space. The processor register will
- * have been cleared if the watchpoint triggered
- * inside the kernel.
- */
- if (unlikely(current->thread.debugreg[7]))
- set_debugreg(current->thread.debugreg[7], 7);
-
- /* Whee! Actually deliver the signal. */
- if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
- /* a signal was successfully delivered; the saved
- * sigmask will have been stored in the signal frame,
- * and will be restored by sigreturn, so we can simply
- * clear the TIF_RESTORE_SIGMASK flag */
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- clear_thread_flag(TIF_RESTORE_SIGMASK);
- }
-
- return;
- }
-
- /* Did we come from a system call? */
- if (regs->orig_eax >= 0) {
- /* Restart the system call - no handlers present */
- switch (regs->eax) {
- case -ERESTARTNOHAND:
- case -ERESTARTSYS:
- case -ERESTARTNOINTR:
- regs->eax = regs->orig_eax;
- regs->eip -= 2;
- break;
-
- case -ERESTART_RESTARTBLOCK:
- regs->eax = __NR_restart_syscall;
- regs->eip -= 2;
- break;
- }
- }
-
- /* if there's no signal to deliver, we just put the saved sigmask
- * back */
- if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
- clear_thread_flag(TIF_RESTORE_SIGMASK);
- sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
- }
-}
-
-/*
- * notification of userspace execution resumption
- * - triggered by the TIF_WORK_MASK flags
- */
-__attribute__((regparm(3)))
-void do_notify_resume(struct pt_regs *regs, void *_unused,
- __u32 thread_info_flags)
-{
- /* Pending single-step? */
- if (thread_info_flags & _TIF_SINGLESTEP) {
- regs->eflags |= TF_MASK;
- clear_thread_flag(TIF_SINGLESTEP);
- }
-
- /* deal with pending signal delivery */
- if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
- do_signal(regs);
-
- clear_thread_flag(TIF_IRET);
-}
diff --git a/arch/i386/kernel/tsc_sync.c b/arch/i386/kernel/tsc_sync.c
deleted file mode 100644
index 12424629af8..00000000000
--- a/arch/i386/kernel/tsc_sync.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../x86_64/kernel/tsc_sync.c"
diff --git a/arch/i386/kernel/vsyscall-int80.S b/arch/i386/kernel/vsyscall-int80.S
deleted file mode 100644
index 530d0525e5e..00000000000
--- a/arch/i386/kernel/vsyscall-int80.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Code for the vsyscall page. This version uses the old int $0x80 method.
- *
- * NOTE:
- * 1) __kernel_vsyscall _must_ be first in this page.
- * 2) there are alignment constraints on this stub, see vsyscall-sigreturn.S
- * for details.
- */
-
- .text
- .globl __kernel_vsyscall
- .type __kernel_vsyscall,@function
-__kernel_vsyscall:
-.LSTART_vsyscall:
- int $0x80
- ret
-.LEND_vsyscall:
- .size __kernel_vsyscall,.-.LSTART_vsyscall
- .previous
-
- .section .eh_frame,"a",@progbits
-.LSTARTFRAMEDLSI:
- .long .LENDCIEDLSI-.LSTARTCIEDLSI
-.LSTARTCIEDLSI:
- .long 0 /* CIE ID */
- .byte 1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
- .uleb128 1 /* Code alignment factor */
- .sleb128 -4 /* Data alignment factor */
- .byte 8 /* Return address register column */
- .uleb128 1 /* Augmentation value length */
- .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
- .byte 0x0c /* DW_CFA_def_cfa */
- .uleb128 4
- .uleb128 4
- .byte 0x88 /* DW_CFA_offset, column 0x8 */
- .uleb128 1
- .align 4
-.LENDCIEDLSI:
- .long .LENDFDEDLSI-.LSTARTFDEDLSI /* Length FDE */
-.LSTARTFDEDLSI:
- .long .LSTARTFDEDLSI-.LSTARTFRAMEDLSI /* CIE pointer */
- .long .LSTART_vsyscall-. /* PC-relative start address */
- .long .LEND_vsyscall-.LSTART_vsyscall
- .uleb128 0
- .align 4
-.LENDFDEDLSI:
- .previous
-
-/*
- * Get the common code for the sigreturn entry points.
- */
-#include "vsyscall-sigreturn.S"
diff --git a/arch/i386/kernel/vsyscall-note.S b/arch/i386/kernel/vsyscall-note.S
deleted file mode 100644
index 07c0daf7823..00000000000
--- a/arch/i386/kernel/vsyscall-note.S
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
- * Here we can supply some information useful to userland.
- */
-
-#include <linux/version.h>
-#include <linux/elfnote.h>
-
-/* Ideally this would use UTS_NAME, but using a quoted string here
- doesn't work. Remember to change this when changing the
- kernel's name. */
-ELFNOTE_START(Linux, 0, "a")
- .long LINUX_VERSION_CODE
-ELFNOTE_END
-
-#ifdef CONFIG_XEN
-/*
- * Add a special note telling glibc's dynamic linker a fake hardware
- * flavor that it will use to choose the search path for libraries in the
- * same way it uses real hardware capabilities like "mmx".
- * We supply "nosegneg" as the fake capability, to indicate that we
- * do not like negative offsets in instructions using segment overrides,
- * since we implement those inefficiently. This makes it possible to
- * install libraries optimized to avoid those access patterns in someplace
- * like /lib/i686/tls/nosegneg. Note that an /etc/ld.so.conf.d/file
- * corresponding to the bits here is needed to make ldconfig work right.
- * It should contain:
- * hwcap 1 nosegneg
- * to match the mapping of bit to name that we give here.
- *
- * At runtime, the fake hardware feature will be considered to be present
- * if its bit is set in the mask word. So, we start with the mask 0, and
- * at boot time we set VDSO_NOTE_NONEGSEG_BIT if running under Xen.
- */
-
-#include "../xen/vdso.h" /* Defines VDSO_NOTE_NONEGSEG_BIT. */
-
- .globl VDSO_NOTE_MASK
-ELFNOTE_START(GNU, 2, "a")
- .long 1 /* ncaps */
-VDSO_NOTE_MASK:
- .long 0 /* mask */
- .byte VDSO_NOTE_NONEGSEG_BIT; .asciz "nosegneg" /* bit, name */
-ELFNOTE_END
-#endif
diff --git a/arch/i386/kernel/vsyscall-sysenter.S b/arch/i386/kernel/vsyscall-sysenter.S
deleted file mode 100644
index 1a36d26e15e..00000000000
--- a/arch/i386/kernel/vsyscall-sysenter.S
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Code for the vsyscall page. This version uses the sysenter instruction.
- *
- * NOTE:
- * 1) __kernel_vsyscall _must_ be first in this page.
- * 2) there are alignment constraints on this stub, see vsyscall-sigreturn.S
- * for details.
- */
-
-/*
- * The caller puts arg2 in %ecx, which gets pushed. The kernel will use
- * %ecx itself for arg2. The pushing is because the sysexit instruction
- * (found in entry.S) requires that we clobber %ecx with the desired %esp.
- * User code might expect that %ecx is unclobbered though, as it would be
- * for returning via the iret instruction, so we must push and pop.
- *
- * The caller puts arg3 in %edx, which the sysexit instruction requires
- * for %eip. Thus, exactly as for arg2, we must push and pop.
- *
- * Arg6 is different. The caller puts arg6 in %ebp. Since the sysenter
- * instruction clobbers %esp, the user's %esp won't even survive entry
- * into the kernel. We store %esp in %ebp. Code in entry.S must fetch
- * arg6 from the stack.
- *
- * You can not use this vsyscall for the clone() syscall because the
- * three dwords on the parent stack do not get copied to the child.
- */
- .text
- .globl __kernel_vsyscall
- .type __kernel_vsyscall,@function
-__kernel_vsyscall:
-.LSTART_vsyscall:
- push %ecx
-.Lpush_ecx:
- push %edx
-.Lpush_edx:
- push %ebp
-.Lenter_kernel:
- movl %esp,%ebp
- sysenter
-
- /* 7: align return point with nop's to make disassembly easier */
- .space 7,0x90
-
- /* 14: System call restart point is here! (SYSENTER_RETURN-2) */
- jmp .Lenter_kernel
- /* 16: System call normal return point is here! */
- .globl SYSENTER_RETURN /* Symbol used by sysenter.c */
-SYSENTER_RETURN:
- pop %ebp
-.Lpop_ebp:
- pop %edx
-.Lpop_edx:
- pop %ecx
-.Lpop_ecx:
- ret
-.LEND_vsyscall:
- .size __kernel_vsyscall,.-.LSTART_vsyscall
- .previous
-
- .section .eh_frame,"a",@progbits
-.LSTARTFRAMEDLSI:
- .long .LENDCIEDLSI-.LSTARTCIEDLSI
-.LSTARTCIEDLSI:
- .long 0 /* CIE ID */
- .byte 1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
- .uleb128 1 /* Code alignment factor */
- .sleb128 -4 /* Data alignment factor */
- .byte 8 /* Return address register column */
- .uleb128 1 /* Augmentation value length */
- .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
- .byte 0x0c /* DW_CFA_def_cfa */
- .uleb128 4
- .uleb128 4
- .byte 0x88 /* DW_CFA_offset, column 0x8 */
- .uleb128 1
- .align 4
-.LENDCIEDLSI:
- .long .LENDFDEDLSI-.LSTARTFDEDLSI /* Length FDE */
-.LSTARTFDEDLSI:
- .long .LSTARTFDEDLSI-.LSTARTFRAMEDLSI /* CIE pointer */
- .long .LSTART_vsyscall-. /* PC-relative start address */
- .long .LEND_vsyscall-.LSTART_vsyscall
- .uleb128 0
- /* What follows are the instructions for the table generation.
- We have to record all changes of the stack pointer. */
- .byte 0x04 /* DW_CFA_advance_loc4 */
- .long .Lpush_ecx-.LSTART_vsyscall
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .byte 0x08 /* RA at offset 8 now */
- .byte 0x04 /* DW_CFA_advance_loc4 */
- .long .Lpush_edx-.Lpush_ecx
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .byte 0x0c /* RA at offset 12 now */
- .byte 0x04 /* DW_CFA_advance_loc4 */
- .long .Lenter_kernel-.Lpush_edx
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .byte 0x10 /* RA at offset 16 now */
- .byte 0x85, 0x04 /* DW_CFA_offset %ebp -16 */
- /* Finally the epilogue. */
- .byte 0x04 /* DW_CFA_advance_loc4 */
- .long .Lpop_ebp-.Lenter_kernel
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .byte 0x0c /* RA at offset 12 now */
- .byte 0xc5 /* DW_CFA_restore %ebp */
- .byte 0x04 /* DW_CFA_advance_loc4 */
- .long .Lpop_edx-.Lpop_ebp
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .byte 0x08 /* RA at offset 8 now */
- .byte 0x04 /* DW_CFA_advance_loc4 */
- .long .Lpop_ecx-.Lpop_edx
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .byte 0x04 /* RA at offset 4 now */
- .align 4
-.LENDFDEDLSI:
- .previous
-
-/*
- * Get the common code for the sigreturn entry points.
- */
-#include "vsyscall-sigreturn.S"
diff --git a/arch/i386/kernel/vsyscall.S b/arch/i386/kernel/vsyscall.S
deleted file mode 100644
index b403890fe39..00000000000
--- a/arch/i386/kernel/vsyscall.S
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/init.h>
-
-__INITDATA
-
- .globl vsyscall_int80_start, vsyscall_int80_end
-vsyscall_int80_start:
- .incbin "arch/i386/kernel/vsyscall-int80.so"
-vsyscall_int80_end:
-
- .globl vsyscall_sysenter_start, vsyscall_sysenter_end
-vsyscall_sysenter_start:
- .incbin "arch/i386/kernel/vsyscall-sysenter.so"
-vsyscall_sysenter_end:
-
-__FINIT
diff --git a/arch/i386/lib/Makefile b/arch/i386/lib/Makefile
deleted file mode 100644
index 4d105fdfe81..00000000000
--- a/arch/i386/lib/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for i386-specific library files..
-#
-
-
-lib-y = checksum.o delay.o usercopy.o getuser.o putuser.o memcpy.o strstr.o \
- bitops.o semaphore.o string.o
-
-lib-$(CONFIG_X86_USE_3DNOW) += mmx.o
-
-obj-$(CONFIG_SMP) += msr-on-cpu.o
diff --git a/arch/i386/mach-generic/Makefile b/arch/i386/mach-generic/Makefile
deleted file mode 100644
index 6914485c0d8..00000000000
--- a/arch/i386/mach-generic/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the generic architecture
-#
-
-EXTRA_CFLAGS := -Iarch/i386/kernel
-
-obj-y := probe.o summit.o bigsmp.o es7000.o default.o ../mach-es7000/
diff --git a/arch/i386/mach-voyager/Makefile b/arch/i386/mach-voyager/Makefile
deleted file mode 100644
index 33b74cf0dd2..00000000000
--- a/arch/i386/mach-voyager/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-EXTRA_CFLAGS := -Iarch/i386/kernel
-obj-y := setup.o voyager_basic.o voyager_thread.o
-
-obj-$(CONFIG_SMP) += voyager_smp.o voyager_cat.o
diff --git a/arch/i386/mm/Makefile b/arch/i386/mm/Makefile
deleted file mode 100644
index 80908b5aa60..00000000000
--- a/arch/i386/mm/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux i386-specific parts of the memory manager.
-#
-
-obj-y := init.o pgtable.o fault.o ioremap.o extable.o pageattr.o mmap.o
-
-obj-$(CONFIG_NUMA) += discontig.o
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_HIGHMEM) += highmem.o
-obj-$(CONFIG_BOOT_IOREMAP) += boot_ioremap.o
diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile
deleted file mode 100644
index 44650e03308..00000000000
--- a/arch/i386/pci/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-obj-y := i386.o init.o
-
-obj-$(CONFIG_PCI_BIOS) += pcbios.o
-obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o
-obj-$(CONFIG_PCI_DIRECT) += direct.o
-
-pci-y := fixup.o
-pci-$(CONFIG_ACPI) += acpi.o
-pci-y += legacy.o irq.o
-
-pci-$(CONFIG_X86_VISWS) := visws.o fixup.o
-pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o
-
-obj-y += $(pci-y) common.o early.o
diff --git a/arch/ia64/ia32/audit.c b/arch/ia64/ia32/audit.c
index 8850fe40ea3..5e901c75df1 100644
--- a/arch/ia64/ia32/audit.c
+++ b/arch/ia64/ia32/audit.c
@@ -1,4 +1,4 @@
-#include <asm-i386/unistd.h>
+#include <asm-x86/unistd_32.h>
unsigned ia32_dir_class[] = {
#include <asm-generic/audit_dir_write.h>
diff --git a/arch/um/sys-i386/sys_call_table.S b/arch/um/sys-i386/sys_call_table.S
index 2497554b7b9..12d4148dba3 100644
--- a/arch/um/sys-i386/sys_call_table.S
+++ b/arch/um/sys-i386/sys_call_table.S
@@ -9,4 +9,4 @@
#define old_mmap old_mmap_i386
-#include "../../i386/kernel/syscall_table.S"
+#include "../../x86/kernel/syscall_table_32.S"
diff --git a/arch/um/sys-x86_64/syscall_table.c b/arch/um/sys-x86_64/syscall_table.c
index 5133988d361..71b2ae4ad5d 100644
--- a/arch/um/sys-x86_64/syscall_table.c
+++ b/arch/um/sys-x86_64/syscall_table.c
@@ -36,7 +36,7 @@
#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
#undef _ASM_X86_64_UNISTD_H_
-#include <asm-x86_64/unistd.h>
+#include <asm-x86/unistd_64.h>
#undef __SYSCALL
#define __SYSCALL(nr, sym) [ nr ] = sym,
@@ -49,5 +49,5 @@ extern void sys_ni_syscall(void);
sys_call_ptr_t sys_call_table[UM_NR_syscall_max+1] __cacheline_aligned = {
/* Smells like a like a compiler bug -- it doesn't work when the & below is removed. */
[0 ... UM_NR_syscall_max] = &sys_ni_syscall,
-#include <asm-x86_64/unistd.h>
+#include <asm-x86/unistd_64.h>
};
diff --git a/arch/i386/boot/.gitignore b/arch/x86/boot/.gitignore
index 18465143cfa..18465143cfa 100644
--- a/arch/i386/boot/.gitignore
+++ b/arch/x86/boot/.gitignore
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
new file mode 100644
index 00000000000..cb1035f2b7e
--- /dev/null
+++ b/arch/x86/boot/Makefile
@@ -0,0 +1,171 @@
+#
+# arch/x86/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Linus Torvalds
+#
+
+# ROOT_DEV specifies the default root-device when making the image.
+# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
+# the default of FLOPPY is used by 'build'.
+
+ROOT_DEV := CURRENT
+
+# If you want to preset the SVGA mode, uncomment the next line and
+# set SVGA_MODE to whatever number you want.
+# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
+# The number is the same as you would ordinarily press at bootup.
+
+SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
+
+# If you want the RAM disk device, define this to be the size in blocks.
+
+#RAMDISK := -DRAMDISK=512
+
+targets := vmlinux.bin setup.bin setup.elf zImage bzImage
+subdir- := compressed
+
+setup-y += a20.o apm.o cmdline.o copy.o cpu.o cpucheck.o edd.o
+setup-y += header.o main.o mca.o memory.o pm.o pmjump.o
+setup-y += printf.o string.o tty.o video.o version.o voyager.o
+
+# The link order of the video-*.o modules can matter. In particular,
+# video-vga.o *must* be listed first, followed by video-vesa.o.
+# Hardware-specific drivers should follow in the order they should be
+# probed, and video-bios.o should typically be last.
+setup-y += video-vga.o
+setup-y += video-vesa.o
+setup-y += video-bios.o
+targets += $(setup-y)
+hostprogs-y := tools/build
+
+HOSTCFLAGS_build.o := $(LINUXINCLUDE)
+
+# ---------------------------------------------------------------------------
+
+# How to compile the 16-bit code. Note we always compile for -march=i386,
+# that way we can complain to the user if the CPU is insufficient.
+cflags-i386 :=
+cflags-x86_64 := -m32
+CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
+ $(cflags-$(ARCH)) \
+ -Wall -Wstrict-prototypes \
+ -march=i386 -mregparm=3 \
+ -include $(srctree)/$(src)/code16gcc.h \
+ -fno-strict-aliasing -fomit-frame-pointer \
+ $(call cc-option, -ffreestanding) \
+ $(call cc-option, -fno-toplevel-reorder,\
+ $(call cc-option, -fno-unit-at-a-time)) \
+ $(call cc-option, -fno-stack-protector) \
+ $(call cc-option, -mpreferred-stack-boundary=2)
+AFLAGS := $(CFLAGS) -D__ASSEMBLY__
+
+$(obj)/zImage: IMAGE_OFFSET := 0x1000
+$(obj)/zImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK)
+$(obj)/bzImage: IMAGE_OFFSET := 0x100000
+$(obj)/bzImage: EXTRA_CFLAGS := -D__BIG_KERNEL__
+$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
+$(obj)/bzImage: BUILDFLAGS := -b
+
+quiet_cmd_image = BUILD $@
+cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \
+ $(obj)/vmlinux.bin $(ROOT_DEV) > $@
+
+$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \
+ $(obj)/vmlinux.bin $(obj)/tools/build FORCE
+ $(call if_changed,image)
+ @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+
+SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
+
+LDFLAGS_setup.elf := -T
+$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
+ $(call if_changed,ld)
+
+OBJCOPYFLAGS_setup.bin := -O binary
+
+$(obj)/setup.bin: $(obj)/setup.elf FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/compressed/vmlinux: FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
+
+# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
+FDARGS =
+# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
+FDINITRD =
+
+image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
+
+$(obj)/mtools.conf: $(src)/mtools.conf.in
+ sed -e 's|@OBJ@|$(obj)|g' < $< > $@
+
+# This requires write access to /dev/fd0
+zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
+ MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
+ syslinux /dev/fd0 ; sync
+ echo '$(image_cmdline)' | \
+ MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg
+ if [ -f '$(FDINITRD)' ] ; then \
+ MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
+ fi
+ MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync
+
+# These require being root or having syslinux 2.02 or higher installed
+fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
+ dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
+ MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
+ syslinux $(obj)/fdimage ; sync
+ echo '$(image_cmdline)' | \
+ MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
+ if [ -f '$(FDINITRD)' ] ; then \
+ MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
+ fi
+ MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync
+
+fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
+ dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
+ MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
+ syslinux $(obj)/fdimage ; sync
+ echo '$(image_cmdline)' | \
+ MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
+ if [ -f '$(FDINITRD)' ] ; then \
+ MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
+ fi
+ MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync
+
+isoimage: $(BOOTIMAGE)
+ -rm -rf $(obj)/isoimage
+ mkdir $(obj)/isoimage
+ for i in lib lib64 share end ; do \
+ if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
+ cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
+ break ; \
+ fi ; \
+ if [ $$i = end ] ; then exit 1 ; fi ; \
+ done
+ cp $(BOOTIMAGE) $(obj)/isoimage/linux
+ echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
+ if [ -f '$(FDINITRD)' ] ; then \
+ cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
+ fi
+ mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
+ -no-emul-boot -boot-load-size 4 -boot-info-table \
+ $(obj)/isoimage
+ rm -rf $(obj)/isoimage
+
+zlilo: $(BOOTIMAGE)
+ if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
+ if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
+ cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
+ cp System.map $(INSTALL_PATH)/
+ if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
+
+install:
+ sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/arch/i386/boot/a20.c b/arch/x86/boot/a20.c
index 31348d054fc..31348d054fc 100644
--- a/arch/i386/boot/a20.c
+++ b/arch/x86/boot/a20.c
diff --git a/arch/i386/boot/apm.c b/arch/x86/boot/apm.c
index eab50c55a3a..eab50c55a3a 100644
--- a/arch/i386/boot/apm.c
+++ b/arch/x86/boot/apm.c
diff --git a/arch/i386/boot/bitops.h b/arch/x86/boot/bitops.h
index 8dcc8dc7db8..8dcc8dc7db8 100644
--- a/arch/i386/boot/bitops.h
+++ b/arch/x86/boot/bitops.h
diff --git a/arch/i386/boot/boot.h b/arch/x86/boot/boot.h
index 20bab9431ac..20bab9431ac 100644
--- a/arch/i386/boot/boot.h
+++ b/arch/x86/boot/boot.h
diff --git a/arch/i386/boot/cmdline.c b/arch/x86/boot/cmdline.c
index 34bb778c435..34bb778c435 100644
--- a/arch/i386/boot/cmdline.c
+++ b/arch/x86/boot/cmdline.c
diff --git a/arch/i386/boot/code16gcc.h b/arch/x86/boot/code16gcc.h
index d93e48010b6..d93e48010b6 100644
--- a/arch/i386/boot/code16gcc.h
+++ b/arch/x86/boot/code16gcc.h
diff --git a/arch/i386/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore
index be0ed065249..be0ed065249 100644
--- a/arch/i386/boot/compressed/.gitignore
+++ b/arch/x86/boot/compressed/.gitignore
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
new file mode 100644
index 00000000000..52c1db85452
--- /dev/null
+++ b/arch/x86/boot/compressed/Makefile
@@ -0,0 +1,5 @@
+ifeq ($(CONFIG_X86_32),y)
+include ${srctree}/arch/x86/boot/compressed/Makefile_32
+else
+include ${srctree}/arch/x86/boot/compressed/Makefile_64
+endif
diff --git a/arch/x86/boot/compressed/Makefile_32 b/arch/x86/boot/compressed/Makefile_32
new file mode 100644
index 00000000000..22613c652d2
--- /dev/null
+++ b/arch/x86/boot/compressed/Makefile_32
@@ -0,0 +1,50 @@
+#
+# linux/arch/x86/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head_32.o misc_32.o piggy.o \
+ vmlinux.bin.all vmlinux.relocs
+EXTRA_AFLAGS := -traditional
+
+LDFLAGS_vmlinux := -T
+hostprogs-y := relocs
+
+CFLAGS := -m32 -D__KERNEL__ $(LINUX_INCLUDE) -O2 \
+ -fno-strict-aliasing -fPIC \
+ $(call cc-option,-ffreestanding) \
+ $(call cc-option,-fno-stack-protector)
+LDFLAGS := -m elf_i386
+
+$(obj)/vmlinux: $(src)/vmlinux_32.lds $(obj)/head_32.o $(obj)/misc_32.o $(obj)/piggy.o FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+quiet_cmd_relocs = RELOCS $@
+ cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
+$(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE
+ $(call if_changed,relocs)
+
+vmlinux.bin.all-y := $(obj)/vmlinux.bin
+vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs
+quiet_cmd_relocbin = BUILD $@
+ cmd_relocbin = cat $(filter-out FORCE,$^) > $@
+$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
+ $(call if_changed,relocbin)
+
+ifdef CONFIG_RELOCATABLE
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
+ $(call if_changed,gzip)
+else
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+endif
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
+
+$(obj)/piggy.o: $(src)/vmlinux_32.scr $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,ld)
diff --git a/arch/x86/boot/compressed/Makefile_64 b/arch/x86/boot/compressed/Makefile_64
new file mode 100644
index 00000000000..dc6b3380cc4
--- /dev/null
+++ b/arch/x86/boot/compressed/Makefile_64
@@ -0,0 +1,30 @@
+#
+# linux/arch/x86/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head_64.o misc_64.o piggy.o
+
+CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2 \
+ -fno-strict-aliasing -fPIC -mcmodel=small \
+ $(call cc-option, -ffreestanding) \
+ $(call cc-option, -fno-stack-protector)
+AFLAGS := $(CFLAGS) -D__ASSEMBLY__
+LDFLAGS := -m elf_x86_64
+
+LDFLAGS_vmlinux := -T
+$(obj)/vmlinux: $(src)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o $(obj)/piggy.o FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
+
+$(obj)/piggy.o: $(obj)/vmlinux_64.scr $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,ld)
diff --git a/arch/i386/boot/compressed/head.S b/arch/x86/boot/compressed/head_32.S
index f35ea223752..f35ea223752 100644
--- a/arch/i386/boot/compressed/head.S
+++ b/arch/x86/boot/compressed/head_32.S
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
new file mode 100644
index 00000000000..49467640751
--- /dev/null
+++ b/arch/x86/boot/compressed/head_64.S
@@ -0,0 +1,311 @@
+/*
+ * linux/boot/head.S
+ *
+ * Copyright (C) 1991, 1992, 1993 Linus Torvalds
+ */
+
+/*
+ * head.S contains the 32-bit startup code.
+ *
+ * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
+ * the page directory will exist. The startup code will be overwritten by
+ * the page directory. [According to comments etc elsewhere on a compressed
+ * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
+ *
+ * Page 0 is deliberately kept safe, since System Management Mode code in
+ * laptops may need to access the BIOS data stored there. This is also
+ * useful for future device drivers that either access the BIOS via VM86
+ * mode.
+ */
+
+/*
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ */
+.code32
+.text
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/msr.h>
+
+.section ".text.head"
+ .code32
+ .globl startup_32
+
+startup_32:
+ cld
+ cli
+ movl $(__KERNEL_DS), %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %ss
+
+/* Calculate the delta between where we were compiled to run
+ * at and where we were actually loaded at. This can only be done
+ * with a short local call on x86. Nothing else will tell us what
+ * address we are running at. The reserved chunk of the real-mode
+ * data at 0x1e4 (defined as a scratch field) are used as the stack
+ * for this calculation. Only 4 bytes are needed.
+ */
+ leal (0x1e4+4)(%esi), %esp
+ call 1f
+1: popl %ebp
+ subl $1b, %ebp
+
+/* setup a stack and make sure cpu supports long mode. */
+ movl $user_stack_end, %eax
+ addl %ebp, %eax
+ movl %eax, %esp
+
+ call verify_cpu
+ testl %eax, %eax
+ jnz no_longmode
+
+/* Compute the delta between where we were compiled to run at
+ * and where the code will actually run at.
+ */
+/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ * contains the address where we should move the kernel image temporarily
+ * for safe in-place decompression.
+ */
+
+#ifdef CONFIG_RELOCATABLE
+ movl %ebp, %ebx
+ addl $(LARGE_PAGE_SIZE -1), %ebx
+ andl $LARGE_PAGE_MASK, %ebx
+#else
+ movl $CONFIG_PHYSICAL_START, %ebx
+#endif
+
+ /* Replace the compressed data size with the uncompressed size */
+ subl input_len(%ebp), %ebx
+ movl output_len(%ebp), %eax
+ addl %eax, %ebx
+ /* Add 8 bytes for every 32K input block */
+ shrl $12, %eax
+ addl %eax, %ebx
+ /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
+ addl $(32768 + 18 + 4095), %ebx
+ andl $~4095, %ebx
+
+/*
+ * Prepare for entering 64 bit mode
+ */
+
+ /* Load new GDT with the 64bit segments using 32bit descriptor */
+ leal gdt(%ebp), %eax
+ movl %eax, gdt+2(%ebp)
+ lgdt gdt(%ebp)
+
+ /* Enable PAE mode */
+ xorl %eax, %eax
+ orl $(1 << 5), %eax
+ movl %eax, %cr4
+
+ /*
+ * Build early 4G boot pagetable
+ */
+ /* Initialize Page tables to 0*/
+ leal pgtable(%ebx), %edi
+ xorl %eax, %eax
+ movl $((4096*6)/4), %ecx
+ rep stosl
+
+ /* Build Level 4 */
+ leal pgtable + 0(%ebx), %edi
+ leal 0x1007 (%edi), %eax
+ movl %eax, 0(%edi)
+
+ /* Build Level 3 */
+ leal pgtable + 0x1000(%ebx), %edi
+ leal 0x1007(%edi), %eax
+ movl $4, %ecx
+1: movl %eax, 0x00(%edi)
+ addl $0x00001000, %eax
+ addl $8, %edi
+ decl %ecx
+ jnz 1b
+
+ /* Build Level 2 */
+ leal pgtable + 0x2000(%ebx), %edi
+ movl $0x00000183, %eax
+ movl $2048, %ecx
+1: movl %eax, 0(%edi)
+ addl $0x00200000, %eax
+ addl $8, %edi
+ decl %ecx
+ jnz 1b
+
+ /* Enable the boot page tables */
+ leal pgtable(%ebx), %eax
+ movl %eax, %cr3
+
+ /* Enable Long mode in EFER (Extended Feature Enable Register) */
+ movl $MSR_EFER, %ecx
+ rdmsr
+ btsl $_EFER_LME, %eax
+ wrmsr
+
+ /* Setup for the jump to 64bit mode
+ *
+ * When the jump is performend we will be in long mode but
+ * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
+ * (and in turn EFER.LMA = 1). To jump into 64bit mode we use
+ * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+ * We place all of the values on our mini stack so lret can
+ * used to perform that far jump.
+ */
+ pushl $__KERNEL_CS
+ leal startup_64(%ebp), %eax
+ pushl %eax
+
+ /* Enter paged protected Mode, activating Long Mode */
+ movl $0x80000001, %eax /* Enable Paging and Protected mode */
+ movl %eax, %cr0
+
+ /* Jump from 32bit compatibility mode into 64bit mode. */
+ lret
+
+no_longmode:
+ /* This isn't an x86-64 CPU so hang */
+1:
+ hlt
+ jmp 1b
+
+#include "../../kernel/verify_cpu_64.S"
+
+ /* Be careful here startup_64 needs to be at a predictable
+ * address so I can export it in an ELF header. Bootloaders
+ * should look at the ELF header to find this address, as
+ * it may change in the future.
+ */
+ .code64
+ .org 0x200
+ENTRY(startup_64)
+ /* We come here either from startup_32 or directly from a
+ * 64bit bootloader. If we come here from a bootloader we depend on
+ * an identity mapped page table being provied that maps our
+ * entire text+data+bss and hopefully all of memory.
+ */
+
+ /* Setup data segments. */
+ xorl %eax, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %ss
+ movl %eax, %fs
+ movl %eax, %gs
+ lldt %ax
+ movl $0x20, %eax
+ ltr %ax
+
+ /* Compute the decompressed kernel start address. It is where
+ * we were loaded at aligned to a 2M boundary. %rbp contains the
+ * decompressed kernel start address.
+ *
+ * If it is a relocatable kernel then decompress and run the kernel
+ * from load address aligned to 2MB addr, otherwise decompress and
+ * run the kernel from CONFIG_PHYSICAL_START
+ */
+
+ /* Start with the delta to where the kernel will run at. */
+#ifdef CONFIG_RELOCATABLE
+ leaq startup_32(%rip) /* - $startup_32 */, %rbp
+ addq $(LARGE_PAGE_SIZE - 1), %rbp
+ andq $LARGE_PAGE_MASK, %rbp
+ movq %rbp, %rbx
+#else
+ movq $CONFIG_PHYSICAL_START, %rbp
+ movq %rbp, %rbx
+#endif
+
+ /* Replace the compressed data size with the uncompressed size */
+ movl input_len(%rip), %eax
+ subq %rax, %rbx
+ movl output_len(%rip), %eax
+ addq %rax, %rbx
+ /* Add 8 bytes for every 32K input block */
+ shrq $12, %rax
+ addq %rax, %rbx
+ /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
+ addq $(32768 + 18 + 4095), %rbx
+ andq $~4095, %rbx
+
+/* Copy the compressed kernel to the end of our buffer
+ * where decompression in place becomes safe.
+ */
+ leaq _end(%rip), %r8
+ leaq _end(%rbx), %r9
+ movq $_end /* - $startup_32 */, %rcx
+1: subq $8, %r8
+ subq $8, %r9
+ movq 0(%r8), %rax
+ movq %rax, 0(%r9)
+ subq $8, %rcx
+ jnz 1b
+
+/*
+ * Jump to the relocated address.
+ */
+ leaq relocated(%rbx), %rax
+ jmp *%rax
+
+.section ".text"
+relocated:
+
+/*
+ * Clear BSS
+ */
+ xorq %rax, %rax
+ leaq _edata(%rbx), %rdi
+ leaq _end(%rbx), %rcx
+ subq %rdi, %rcx
+ cld
+ rep
+ stosb
+
+ /* Setup the stack */
+ leaq user_stack_end(%rip), %rsp
+
+ /* zero EFLAGS after setting rsp */
+ pushq $0
+ popfq
+
+/*
+ * Do the decompression, and jump to the new kernel..
+ */
+ pushq %rsi # Save the real mode argument
+ movq %rsi, %rdi # real mode address
+ leaq _heap(%rip), %rsi # _heap
+ leaq input_data(%rip), %rdx # input_data
+ movl input_len(%rip), %eax
+ movq %rax, %rcx # input_len
+ movq %rbp, %r8 # output
+ call decompress_kernel
+ popq %rsi
+
+
+/*
+ * Jump to the decompressed kernel.
+ */
+ jmp *%rbp
+
+ .data
+gdt:
+ .word gdt_end - gdt
+ .long gdt
+ .word 0
+ .quad 0x0000000000000000 /* NULL descriptor */
+ .quad 0x00af9a000000ffff /* __KERNEL_CS */
+ .quad 0x00cf92000000ffff /* __KERNEL_DS */
+ .quad 0x0080890000000000 /* TS descriptor */
+ .quad 0x0000000000000000 /* TS continued */
+gdt_end:
+ .bss
+/* Stack for uncompression */
+ .balign 4
+user_stack:
+ .fill 4096,4,0
+user_stack_end:
diff --git a/arch/i386/boot/compressed/misc.c b/arch/x86/boot/compressed/misc_32.c
index b28505c544c..b28505c544c 100644
--- a/arch/i386/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc_32.c
diff --git a/arch/x86_64/boot/compressed/misc.c b/arch/x86/boot/compressed/misc_64.c
index f932b0e8909..f932b0e8909 100644
--- a/arch/x86_64/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc_64.c
diff --git a/arch/i386/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c
index 2d77ee728f9..2d77ee728f9 100644
--- a/arch/i386/boot/compressed/relocs.c
+++ b/arch/x86/boot/compressed/relocs.c
diff --git a/arch/i386/boot/compressed/vmlinux.lds b/arch/x86/boot/compressed/vmlinux_32.lds
index cc4854f6c6c..cc4854f6c6c 100644
--- a/arch/i386/boot/compressed/vmlinux.lds
+++ b/arch/x86/boot/compressed/vmlinux_32.lds
diff --git a/arch/i386/boot/compressed/vmlinux.scr b/arch/x86/boot/compressed/vmlinux_32.scr
index 707a88f7f29..707a88f7f29 100644
--- a/arch/i386/boot/compressed/vmlinux.scr
+++ b/arch/x86/boot/compressed/vmlinux_32.scr
diff --git a/arch/x86_64/boot/compressed/vmlinux.lds b/arch/x86/boot/compressed/vmlinux_64.lds
index 94c13e557fb..94c13e557fb 100644
--- a/arch/x86_64/boot/compressed/vmlinux.lds
+++ b/arch/x86/boot/compressed/vmlinux_64.lds
diff --git a/arch/x86_64/boot/compressed/vmlinux.scr b/arch/x86/boot/compressed/vmlinux_64.scr
index bd1429ce193..bd1429ce193 100644
--- a/arch/x86_64/boot/compressed/vmlinux.scr
+++ b/arch/x86/boot/compressed/vmlinux_64.scr
diff --git a/arch/i386/boot/copy.S b/arch/x86/boot/copy.S
index ef127e56a3c..ef127e56a3c 100644
--- a/arch/i386/boot/copy.S
+++ b/arch/x86/boot/copy.S
diff --git a/arch/i386/boot/cpu.c b/arch/x86/boot/cpu.c
index 2a5c32da585..2a5c32da585 100644
--- a/arch/i386/boot/cpu.c
+++ b/arch/x86/boot/cpu.c
diff --git a/arch/i386/boot/cpucheck.c b/arch/x86/boot/cpucheck.c
index e655a89c551..e655a89c551 100644
--- a/arch/i386/boot/cpucheck.c
+++ b/arch/x86/boot/cpucheck.c
diff --git a/arch/i386/boot/edd.c b/arch/x86/boot/edd.c
index bd138e442ec..bd138e442ec 100644
--- a/arch/i386/boot/edd.c
+++ b/arch/x86/boot/edd.c
diff --git a/arch/i386/boot/header.S b/arch/x86/boot/header.S
index f3140e596d4..f3140e596d4 100644
--- a/arch/i386/boot/header.S
+++ b/arch/x86/boot/header.S
diff --git a/arch/i386/boot/install.sh b/arch/x86/boot/install.sh
index 88d77761d01..88d77761d01 100644
--- a/arch/i386/boot/install.sh
+++ b/arch/x86/boot/install.sh
diff --git a/arch/i386/boot/main.c b/arch/x86/boot/main.c
index 0eeef3989a1..0eeef3989a1 100644
--- a/arch/i386/boot/main.c
+++ b/arch/x86/boot/main.c
diff --git a/arch/i386/boot/mca.c b/arch/x86/boot/mca.c
index 68222f2d4b6..68222f2d4b6 100644
--- a/arch/i386/boot/mca.c
+++ b/arch/x86/boot/mca.c
diff --git a/arch/i386/boot/memory.c b/arch/x86/boot/memory.c
index 378353956b5..378353956b5 100644
--- a/arch/i386/boot/memory.c
+++ b/arch/x86/boot/memory.c
diff --git a/arch/i386/boot/mtools.conf.in b/arch/x86/boot/mtools.conf.in
index efd6d2490c1..efd6d2490c1 100644
--- a/arch/i386/boot/mtools.conf.in
+++ b/arch/x86/boot/mtools.conf.in
diff --git a/arch/i386/boot/pm.c b/arch/x86/boot/pm.c
index 09fb342cc62..09fb342cc62 100644
--- a/arch/i386/boot/pm.c
+++ b/arch/x86/boot/pm.c
diff --git a/arch/i386/boot/pmjump.S b/arch/x86/boot/pmjump.S
index 2e559233725..2e559233725 100644
--- a/arch/i386/boot/pmjump.S
+++ b/arch/x86/boot/pmjump.S
diff --git a/arch/i386/boot/printf.c b/arch/x86/boot/printf.c
index 1a09f9309d3..1a09f9309d3 100644
--- a/arch/i386/boot/printf.c
+++ b/arch/x86/boot/printf.c
diff --git a/arch/i386/boot/setup.ld b/arch/x86/boot/setup.ld
index df9234b3a5e..df9234b3a5e 100644
--- a/arch/i386/boot/setup.ld
+++ b/arch/x86/boot/setup.ld
diff --git a/arch/i386/boot/string.c b/arch/x86/boot/string.c
index 481a2209778..481a2209778 100644
--- a/arch/i386/boot/string.c
+++ b/arch/x86/boot/string.c
diff --git a/arch/i386/boot/tools/.gitignore b/arch/x86/boot/tools/.gitignore
index 378eac25d31..378eac25d31 100644
--- a/arch/i386/boot/tools/.gitignore
+++ b/arch/x86/boot/tools/.gitignore
diff --git a/arch/i386/boot/tools/build.c b/arch/x86/boot/tools/build.c
index b4248740ff0..b4248740ff0 100644
--- a/arch/i386/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
diff --git a/arch/i386/boot/tty.c b/arch/x86/boot/tty.c
index f3f14bd2637..f3f14bd2637 100644
--- a/arch/i386/boot/tty.c
+++ b/arch/x86/boot/tty.c
diff --git a/arch/i386/boot/version.c b/arch/x86/boot/version.c
index c61462f7d9a..c61462f7d9a 100644
--- a/arch/i386/boot/version.c
+++ b/arch/x86/boot/version.c
diff --git a/arch/i386/boot/vesa.h b/arch/x86/boot/vesa.h
index ff5b73cd406..ff5b73cd406 100644
--- a/arch/i386/boot/vesa.h
+++ b/arch/x86/boot/vesa.h
diff --git a/arch/i386/boot/video-bios.c b/arch/x86/boot/video-bios.c
index 68e65d95cdf..68e65d95cdf 100644
--- a/arch/i386/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
diff --git a/arch/i386/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 19219071071..19219071071 100644
--- a/arch/i386/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
diff --git a/arch/i386/boot/video-vga.c b/arch/x86/boot/video-vga.c
index aef02f9ec0c..aef02f9ec0c 100644
--- a/arch/i386/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
diff --git a/arch/i386/boot/video.c b/arch/x86/boot/video.c
index e4ba897bf9a..e4ba897bf9a 100644
--- a/arch/i386/boot/video.c
+++ b/arch/x86/boot/video.c
diff --git a/arch/i386/boot/video.h b/arch/x86/boot/video.h
index b92447d5121..b92447d5121 100644
--- a/arch/i386/boot/video.h
+++ b/arch/x86/boot/video.h
diff --git a/arch/i386/boot/voyager.c b/arch/x86/boot/voyager.c
index 61c8fe0453b..61c8fe0453b 100644
--- a/arch/i386/boot/voyager.c
+++ b/arch/x86/boot/voyager.c
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
new file mode 100644
index 00000000000..18dcdc6fb7a
--- /dev/null
+++ b/arch/x86/crypto/Makefile
@@ -0,0 +1,5 @@
+ifeq ($(CONFIG_X86_32),y)
+include ${srctree}/arch/x86/crypto/Makefile_32
+else
+include ${srctree}/arch/x86/crypto/Makefile_64
+endif
diff --git a/arch/x86/crypto/Makefile_32 b/arch/x86/crypto/Makefile_32
new file mode 100644
index 00000000000..2d873a2388e
--- /dev/null
+++ b/arch/x86/crypto/Makefile_32
@@ -0,0 +1,12 @@
+#
+# x86/crypto/Makefile
+#
+# Arch-specific CryptoAPI modules.
+#
+
+obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
+obj-$(CONFIG_CRYPTO_TWOFISH_586) += twofish-i586.o
+
+aes-i586-y := aes-i586-asm_32.o aes_32.o
+twofish-i586-y := twofish-i586-asm_32.o twofish_32.o
+
diff --git a/arch/x86/crypto/Makefile_64 b/arch/x86/crypto/Makefile_64
new file mode 100644
index 00000000000..b40896276e9
--- /dev/null
+++ b/arch/x86/crypto/Makefile_64
@@ -0,0 +1,12 @@
+#
+# x86/crypto/Makefile
+#
+# Arch-specific CryptoAPI modules.
+#
+
+obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o
+obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o
+
+aes-x86_64-y := aes-x86_64-asm_64.o aes_64.o
+twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_64.o
+
diff --git a/arch/i386/crypto/aes-i586-asm.S b/arch/x86/crypto/aes-i586-asm_32.S
index f942f0c8f63..f942f0c8f63 100644
--- a/arch/i386/crypto/aes-i586-asm.S
+++ b/arch/x86/crypto/aes-i586-asm_32.S
diff --git a/arch/x86_64/crypto/aes-x86_64-asm.S b/arch/x86/crypto/aes-x86_64-asm_64.S
index 26b40de4d0b..26b40de4d0b 100644
--- a/arch/x86_64/crypto/aes-x86_64-asm.S
+++ b/arch/x86/crypto/aes-x86_64-asm_64.S
diff --git a/arch/i386/crypto/aes.c b/arch/x86/crypto/aes_32.c
index 49aad9397f1..49aad9397f1 100644
--- a/arch/i386/crypto/aes.c
+++ b/arch/x86/crypto/aes_32.c
diff --git a/arch/x86_64/crypto/aes.c b/arch/x86/crypto/aes_64.c
index 5cdb13ea5cc..5cdb13ea5cc 100644
--- a/arch/x86_64/crypto/aes.c
+++ b/arch/x86/crypto/aes_64.c
diff --git a/arch/i386/crypto/twofish-i586-asm.S b/arch/x86/crypto/twofish-i586-asm_32.S
index 39b98ed2c1b..39b98ed2c1b 100644
--- a/arch/i386/crypto/twofish-i586-asm.S
+++ b/arch/x86/crypto/twofish-i586-asm_32.S
diff --git a/arch/x86_64/crypto/twofish-x86_64-asm.S b/arch/x86/crypto/twofish-x86_64-asm_64.S
index 35974a58661..35974a58661 100644
--- a/arch/x86_64/crypto/twofish-x86_64-asm.S
+++ b/arch/x86/crypto/twofish-x86_64-asm_64.S
diff --git a/arch/i386/crypto/twofish.c b/arch/x86/crypto/twofish_32.c
index e3004dfe9c7..e3004dfe9c7 100644
--- a/arch/i386/crypto/twofish.c
+++ b/arch/x86/crypto/twofish_32.c
diff --git a/arch/x86_64/crypto/twofish.c b/arch/x86/crypto/twofish_64.c
index 182d91d5cfb..182d91d5cfb 100644
--- a/arch/x86_64/crypto/twofish.c
+++ b/arch/x86/crypto/twofish_64.c
diff --git a/arch/x86_64/ia32/Makefile b/arch/x86/ia32/Makefile
index cdae36435e2..cdae36435e2 100644
--- a/arch/x86_64/ia32/Makefile
+++ b/arch/x86/ia32/Makefile
diff --git a/arch/x86/ia32/audit.c b/arch/x86/ia32/audit.c
new file mode 100644
index 00000000000..91b7b5922df
--- /dev/null
+++ b/arch/x86/ia32/audit.c
@@ -0,0 +1,42 @@
+#include <asm/unistd_32.h>
+
+unsigned ia32_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned ia32_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+unsigned ia32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned ia32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+unsigned ia32_signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int ia32_classify_syscall(unsigned syscall)
+{
+ switch(syscall) {
+ case __NR_open:
+ return 2;
+ case __NR_openat:
+ return 3;
+ case __NR_socketcall:
+ return 4;
+ case __NR_execve:
+ return 5;
+ default:
+ return 1;
+ }
+}
diff --git a/arch/x86_64/ia32/fpu32.c b/arch/x86/ia32/fpu32.c
index 2c8209a3605..2c8209a3605 100644
--- a/arch/x86_64/ia32/fpu32.c
+++ b/arch/x86/ia32/fpu32.c
diff --git a/arch/x86_64/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index 08781370256..08781370256 100644
--- a/arch/x86_64/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86/ia32/ia32_binfmt.c
index dffd2ac7274..dffd2ac7274 100644
--- a/arch/x86_64/ia32/ia32_binfmt.c
+++ b/arch/x86/ia32/ia32_binfmt.c
diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index 6ea19c25f90..6ea19c25f90 100644
--- a/arch/x86_64/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 18b23181090..18b23181090 100644
--- a/arch/x86_64/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
diff --git a/arch/x86/ia32/ipc32.c b/arch/x86/ia32/ipc32.c
new file mode 100644
index 00000000000..2e1869ec4db
--- /dev/null
+++ b/arch/x86/ia32/ipc32.c
@@ -0,0 +1,57 @@
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/syscalls.h>
+#include <linux/time.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/ipc.h>
+#include <linux/compat.h>
+
+#include <asm/ipc.h>
+
+asmlinkage long
+sys32_ipc(u32 call, int first, int second, int third,
+ compat_uptr_t ptr, u32 fifth)
+{
+ int version;
+
+ version = call >> 16; /* hack for backward compatibility */
+ call &= 0xffff;
+
+ switch (call) {
+ case SEMOP:
+ /* struct sembuf is the same on 32 and 64bit :)) */
+ return sys_semtimedop(first, compat_ptr(ptr), second, NULL);
+ case SEMTIMEDOP:
+ return compat_sys_semtimedop(first, compat_ptr(ptr), second,
+ compat_ptr(fifth));
+ case SEMGET:
+ return sys_semget(first, second, third);
+ case SEMCTL:
+ return compat_sys_semctl(first, second, third, compat_ptr(ptr));
+
+ case MSGSND:
+ return compat_sys_msgsnd(first, second, third, compat_ptr(ptr));
+ case MSGRCV:
+ return compat_sys_msgrcv(first, second, fifth, third,
+ version, compat_ptr(ptr));
+ case MSGGET:
+ return sys_msgget((key_t) first, second);
+ case MSGCTL:
+ return compat_sys_msgctl(first, second, compat_ptr(ptr));
+
+ case SHMAT:
+ return compat_sys_shmat(first, second, third, version,
+ compat_ptr(ptr));
+ break;
+ case SHMDT:
+ return sys_shmdt(compat_ptr(ptr));
+ case SHMGET:
+ return sys_shmget(first, (unsigned)second, third);
+ case SHMCTL:
+ return compat_sys_shmctl(first, second, compat_ptr(ptr));
+ }
+ return -ENOSYS;
+}
diff --git a/arch/x86_64/ia32/mmap32.c b/arch/x86/ia32/mmap32.c
index e4b84b4a417..e4b84b4a417 100644
--- a/arch/x86_64/ia32/mmap32.c
+++ b/arch/x86/ia32/mmap32.c
diff --git a/arch/x86_64/ia32/ptrace32.c b/arch/x86/ia32/ptrace32.c
index 4a233ad6269..4a233ad6269 100644
--- a/arch/x86_64/ia32/ptrace32.c
+++ b/arch/x86/ia32/ptrace32.c
diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index bee96d61443..bee96d61443 100644
--- a/arch/x86_64/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
diff --git a/arch/x86_64/ia32/syscall32.c b/arch/x86/ia32/syscall32.c
index 15013bac181..15013bac181 100644
--- a/arch/x86_64/ia32/syscall32.c
+++ b/arch/x86/ia32/syscall32.c
diff --git a/arch/x86/ia32/syscall32_syscall.S b/arch/x86/ia32/syscall32_syscall.S
new file mode 100644
index 00000000000..933f0f08b1c
--- /dev/null
+++ b/arch/x86/ia32/syscall32_syscall.S
@@ -0,0 +1,17 @@
+/* 32bit VDSOs mapped into user space. */
+
+ .section ".init.data","aw"
+
+ .globl syscall32_syscall
+ .globl syscall32_syscall_end
+
+syscall32_syscall:
+ .incbin "arch/x86/ia32/vsyscall-syscall.so"
+syscall32_syscall_end:
+
+ .globl syscall32_sysenter
+ .globl syscall32_sysenter_end
+
+syscall32_sysenter:
+ .incbin "arch/x86/ia32/vsyscall-sysenter.so"
+syscall32_sysenter_end:
diff --git a/arch/x86_64/ia32/tls32.c b/arch/x86/ia32/tls32.c
index 1cc4340de3c..1cc4340de3c 100644
--- a/arch/x86_64/ia32/tls32.c
+++ b/arch/x86/ia32/tls32.c
diff --git a/arch/x86/ia32/vsyscall-sigreturn.S b/arch/x86/ia32/vsyscall-sigreturn.S
new file mode 100644
index 00000000000..b383be00bae
--- /dev/null
+++ b/arch/x86/ia32/vsyscall-sigreturn.S
@@ -0,0 +1,143 @@
+/*
+ * Common code for the sigreturn entry points on the vsyscall page.
+ * This code uses SYSCALL_ENTER_KERNEL (either syscall or int $0x80)
+ * to enter the kernel.
+ * This file is #include'd by vsyscall-*.S to define them after the
+ * vsyscall entry point. The addresses we get for these entry points
+ * by doing ".balign 32" must match in both versions of the page.
+ */
+
+ .code32
+ .section .text.sigreturn,"ax"
+ .balign 32
+ .globl __kernel_sigreturn
+ .type __kernel_sigreturn,@function
+__kernel_sigreturn:
+.LSTART_sigreturn:
+ popl %eax
+ movl $__NR_ia32_sigreturn, %eax
+ SYSCALL_ENTER_KERNEL
+.LEND_sigreturn:
+ .size __kernel_sigreturn,.-.LSTART_sigreturn
+
+ .section .text.rtsigreturn,"ax"
+ .balign 32
+ .globl __kernel_rt_sigreturn
+ .type __kernel_rt_sigreturn,@function
+__kernel_rt_sigreturn:
+.LSTART_rt_sigreturn:
+ movl $__NR_ia32_rt_sigreturn, %eax
+ SYSCALL_ENTER_KERNEL
+.LEND_rt_sigreturn:
+ .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
+
+ .section .eh_frame,"a",@progbits
+.LSTARTFRAMES:
+ .long .LENDCIES-.LSTARTCIES
+.LSTARTCIES:
+ .long 0 /* CIE ID */
+ .byte 1 /* Version number */
+ .string "zRS" /* NUL-terminated augmentation string */
+ .uleb128 1 /* Code alignment factor */
+ .sleb128 -4 /* Data alignment factor */
+ .byte 8 /* Return address register column */
+ .uleb128 1 /* Augmentation value length */
+ .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
+ .byte 0x0c /* DW_CFA_def_cfa */
+ .uleb128 4
+ .uleb128 4
+ .byte 0x88 /* DW_CFA_offset, column 0x8 */
+ .uleb128 1
+ .align 4
+.LENDCIES:
+
+ .long .LENDFDE2-.LSTARTFDE2 /* Length FDE */
+.LSTARTFDE2:
+ .long .LSTARTFDE2-.LSTARTFRAMES /* CIE pointer */
+ /* HACK: The dwarf2 unwind routines will subtract 1 from the
+ return address to get an address in the middle of the
+ presumed call instruction. Since we didn't get here via
+ a call, we need to include the nop before the real start
+ to make up for it. */
+ .long .LSTART_sigreturn-1-. /* PC-relative start address */
+ .long .LEND_sigreturn-.LSTART_sigreturn+1
+ .uleb128 0 /* Augmentation length */
+ /* What follows are the instructions for the table generation.
+ We record the locations of each register saved. This is
+ complicated by the fact that the "CFA" is always assumed to
+ be the value of the stack pointer in the caller. This means
+ that we must define the CFA of this body of code to be the
+ saved value of the stack pointer in the sigcontext. Which
+ also means that there is no fixed relation to the other
+ saved registers, which means that we must use DW_CFA_expression
+ to compute their addresses. It also means that when we
+ adjust the stack with the popl, we have to do it all over again. */
+
+#define do_cfa_expr(offset) \
+ .byte 0x0f; /* DW_CFA_def_cfa_expression */ \
+ .uleb128 1f-0f; /* length */ \
+0: .byte 0x74; /* DW_OP_breg4 */ \
+ .sleb128 offset; /* offset */ \
+ .byte 0x06; /* DW_OP_deref */ \
+1:
+
+#define do_expr(regno, offset) \
+ .byte 0x10; /* DW_CFA_expression */ \
+ .uleb128 regno; /* regno */ \
+ .uleb128 1f-0f; /* length */ \
+0: .byte 0x74; /* DW_OP_breg4 */ \
+ .sleb128 offset; /* offset */ \
+1:
+
+ do_cfa_expr(IA32_SIGCONTEXT_esp+4)
+ do_expr(0, IA32_SIGCONTEXT_eax+4)
+ do_expr(1, IA32_SIGCONTEXT_ecx+4)
+ do_expr(2, IA32_SIGCONTEXT_edx+4)
+ do_expr(3, IA32_SIGCONTEXT_ebx+4)
+ do_expr(5, IA32_SIGCONTEXT_ebp+4)
+ do_expr(6, IA32_SIGCONTEXT_esi+4)
+ do_expr(7, IA32_SIGCONTEXT_edi+4)
+ do_expr(8, IA32_SIGCONTEXT_eip+4)
+
+ .byte 0x42 /* DW_CFA_advance_loc 2 -- nop; popl eax. */
+
+ do_cfa_expr(IA32_SIGCONTEXT_esp)
+ do_expr(0, IA32_SIGCONTEXT_eax)
+ do_expr(1, IA32_SIGCONTEXT_ecx)
+ do_expr(2, IA32_SIGCONTEXT_edx)
+ do_expr(3, IA32_SIGCONTEXT_ebx)
+ do_expr(5, IA32_SIGCONTEXT_ebp)
+ do_expr(6, IA32_SIGCONTEXT_esi)
+ do_expr(7, IA32_SIGCONTEXT_edi)
+ do_expr(8, IA32_SIGCONTEXT_eip)
+
+ .align 4
+.LENDFDE2:
+
+ .long .LENDFDE3-.LSTARTFDE3 /* Length FDE */
+.LSTARTFDE3:
+ .long .LSTARTFDE3-.LSTARTFRAMES /* CIE pointer */
+ /* HACK: See above wrt unwind library assumptions. */
+ .long .LSTART_rt_sigreturn-1-. /* PC-relative start address */
+ .long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1
+ .uleb128 0 /* Augmentation */
+ /* What follows are the instructions for the table generation.
+ We record the locations of each register saved. This is
+ slightly less complicated than the above, since we don't
+ modify the stack pointer in the process. */
+
+ do_cfa_expr(IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_esp)
+ do_expr(0, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_eax)
+ do_expr(1, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ecx)
+ do_expr(2, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_edx)
+ do_expr(3, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ebx)
+ do_expr(5, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ebp)
+ do_expr(6, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_esi)
+ do_expr(7, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_edi)
+ do_expr(8, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_eip)
+
+ .align 4
+.LENDFDE3:
+
+#include "../../x86/kernel/vsyscall-note_32.S"
+
diff --git a/arch/x86_64/ia32/vsyscall-syscall.S b/arch/x86/ia32/vsyscall-syscall.S
index cf9ef678de3..cf9ef678de3 100644
--- a/arch/x86_64/ia32/vsyscall-syscall.S
+++ b/arch/x86/ia32/vsyscall-syscall.S
diff --git a/arch/x86_64/ia32/vsyscall-sysenter.S b/arch/x86/ia32/vsyscall-sysenter.S
index ae056e553d1..ae056e553d1 100644
--- a/arch/x86_64/ia32/vsyscall-sysenter.S
+++ b/arch/x86/ia32/vsyscall-sysenter.S
diff --git a/arch/x86_64/ia32/vsyscall.lds b/arch/x86/ia32/vsyscall.lds
index 1dc86ff5bcb..1dc86ff5bcb 100644
--- a/arch/x86_64/ia32/vsyscall.lds
+++ b/arch/x86/ia32/vsyscall.lds
diff --git a/arch/i386/kernel/.gitignore b/arch/x86/kernel/.gitignore
index 40836ad9079..40836ad9079 100644
--- a/arch/i386/kernel/.gitignore
+++ b/arch/x86/kernel/.gitignore
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
new file mode 100644
index 00000000000..45855c97923
--- /dev/null
+++ b/arch/x86/kernel/Makefile
@@ -0,0 +1,5 @@
+ifeq ($(CONFIG_X86_32),y)
+include ${srctree}/arch/x86/kernel/Makefile_32
+else
+include ${srctree}/arch/x86/kernel/Makefile_64
+endif
diff --git a/arch/x86/kernel/Makefile_32 b/arch/x86/kernel/Makefile_32
new file mode 100644
index 00000000000..c624193740f
--- /dev/null
+++ b/arch/x86/kernel/Makefile_32
@@ -0,0 +1,86 @@
+#
+# Makefile for the linux kernel.
+#
+
+extra-y := head_32.o init_task_32.o vmlinux.lds
+
+obj-y := process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \
+ ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \
+ pci-dma_32.o i386_ksyms_32.o i387_32.o bootflag.o e820_32.o\
+ quirks.o i8237.o topology.o alternative.o i8253_32.o tsc_32.o
+
+obj-$(CONFIG_STACKTRACE) += stacktrace.o
+obj-y += cpu/
+obj-y += acpi/
+obj-$(CONFIG_X86_BIOS_REBOOT) += reboot_32.o
+obj-$(CONFIG_MCA) += mca_32.o
+obj-$(CONFIG_X86_MSR) += msr.o
+obj-$(CONFIG_X86_CPUID) += cpuid.o
+obj-$(CONFIG_MICROCODE) += microcode.o
+obj-$(CONFIG_APM) += apm_32.o
+obj-$(CONFIG_X86_SMP) += smp_32.o smpboot_32.o tsc_sync.o
+obj-$(CONFIG_SMP) += smpcommon_32.o
+obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_32.o
+obj-$(CONFIG_X86_MPPARSE) += mpparse_32.o
+obj-$(CONFIG_X86_LOCAL_APIC) += apic_32.o nmi_32.o
+obj-$(CONFIG_X86_IO_APIC) += io_apic_32.o
+obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o
+obj-$(CONFIG_KEXEC) += machine_kexec_32.o relocate_kernel_32.o crash_32.o
+obj-$(CONFIG_CRASH_DUMP) += crash_dump_32.o
+obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
+obj-$(CONFIG_X86_SUMMIT_NUMA) += summit_32.o
+obj-$(CONFIG_KPROBES) += kprobes_32.o
+obj-$(CONFIG_MODULES) += module_32.o
+obj-y += sysenter_32.o vsyscall_32.o
+obj-$(CONFIG_ACPI_SRAT) += srat_32.o
+obj-$(CONFIG_EFI) += efi_32.o efi_stub_32.o
+obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o
+obj-$(CONFIG_VM86) += vm86_32.o
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_HPET_TIMER) += hpet_32.o
+obj-$(CONFIG_K8_NB) += k8.o
+obj-$(CONFIG_MGEODE_LX) += geode_32.o
+
+obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o
+obj-$(CONFIG_PARAVIRT) += paravirt_32.o
+obj-y += pcspeaker.o
+
+obj-$(CONFIG_SCx200) += scx200_32.o
+
+# vsyscall_32.o contains the vsyscall DSO images as __initdata.
+# We must build both images before we can assemble it.
+# Note: kbuild does not track this dependency due to usage of .incbin
+$(obj)/vsyscall_32.o: $(obj)/vsyscall-int80_32.so $(obj)/vsyscall-sysenter_32.so
+targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
+targets += vsyscall-note_32.o vsyscall_32.lds
+
+# The DSO images are built using a special linker script.
+quiet_cmd_syscall = SYSCALL $@
+ cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
+ -Wl,-T,$(filter-out FORCE,$^) -o $@
+
+export CPPFLAGS_vsyscall_32.lds += -P -C -U$(ARCH)
+
+vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
+ $(call ld-option, -Wl$(comma)--hash-style=sysv)
+SYSCFLAGS_vsyscall-sysenter_32.so = $(vsyscall-flags)
+SYSCFLAGS_vsyscall-int80_32.so = $(vsyscall-flags)
+
+$(obj)/vsyscall-int80_32.so $(obj)/vsyscall-sysenter_32.so: \
+$(obj)/vsyscall-%.so: $(src)/vsyscall_32.lds \
+ $(obj)/vsyscall-%.o $(obj)/vsyscall-note_32.o FORCE
+ $(call if_changed,syscall)
+
+# We also create a special relocatable object that should mirror the symbol
+# table and layout of the linked DSO. With ld -R we can then refer to
+# these symbols in the kernel code rather than hand-coded addresses.
+extra-y += vsyscall-syms.o
+$(obj)/built-in.o: $(obj)/vsyscall-syms.o
+$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
+
+SYSCFLAGS_vsyscall-syms.o = -r
+$(obj)/vsyscall-syms.o: $(src)/vsyscall_32.lds \
+ $(obj)/vsyscall-sysenter_32.o $(obj)/vsyscall-note_32.o FORCE
+ $(call if_changed,syscall)
+
+
diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64
new file mode 100644
index 00000000000..3ab017a0a3b
--- /dev/null
+++ b/arch/x86/kernel/Makefile_64
@@ -0,0 +1,54 @@
+#
+# Makefile for the linux kernel.
+#
+
+extra-y := head_64.o head64.o init_task_64.o vmlinux.lds
+EXTRA_AFLAGS := -traditional
+obj-y := process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \
+ ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \
+ x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \
+ setup64.o bootflag.o e820_64.o reboot_64.o quirks.o i8237.o \
+ pci-dma_64.o pci-nommu_64.o alternative.o hpet_64.o tsc_64.o bugs_64.o \
+ perfctr-watchdog.o
+
+obj-$(CONFIG_STACKTRACE) += stacktrace.o
+obj-$(CONFIG_X86_MCE) += mce_64.o therm_throt.o
+obj-$(CONFIG_X86_MCE_INTEL) += mce_intel_64.o
+obj-$(CONFIG_X86_MCE_AMD) += mce_amd_64.o
+obj-$(CONFIG_MTRR) += cpu/mtrr/
+obj-$(CONFIG_ACPI) += acpi/
+obj-$(CONFIG_X86_MSR) += msr.o
+obj-$(CONFIG_MICROCODE) += microcode.o
+obj-$(CONFIG_X86_CPUID) += cpuid.o
+obj-$(CONFIG_SMP) += smp_64.o smpboot_64.o trampoline_64.o tsc_sync.o
+obj-y += apic_64.o nmi_64.o
+obj-y += io_apic_64.o mpparse_64.o genapic_64.o genapic_flat_64.o
+obj-$(CONFIG_KEXEC) += machine_kexec_64.o relocate_kernel_64.o crash_64.o
+obj-$(CONFIG_CRASH_DUMP) += crash_dump_64.o
+obj-$(CONFIG_PM) += suspend_64.o
+obj-$(CONFIG_HIBERNATION) += suspend_asm_64.o
+obj-$(CONFIG_CPU_FREQ) += cpu/cpufreq/
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_IOMMU) += pci-gart_64.o aperture_64.o
+obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o
+obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o
+obj-$(CONFIG_KPROBES) += kprobes_64.o
+obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o
+obj-$(CONFIG_X86_VSMP) += vsmp_64.o
+obj-$(CONFIG_K8_NB) += k8.o
+obj-$(CONFIG_AUDIT) += audit_64.o
+
+obj-$(CONFIG_MODULES) += module_64.o
+obj-$(CONFIG_PCI) += early-quirks_64.o
+
+obj-y += topology.o
+obj-y += intel_cacheinfo.o
+obj-y += addon_cpuid_features.o
+obj-y += pcspeaker.o
+
+CFLAGS_vsyscall_64.o := $(PROFILING) -g0
+
+therm_throt-y += cpu/mcheck/therm_throt.o
+intel_cacheinfo-y += cpu/intel_cacheinfo.o
+addon_cpuid_features-y += cpu/addon_cpuid_features.o
+perfctr-watchdog-y += cpu/perfctr-watchdog.o
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
new file mode 100644
index 00000000000..3d567193954
--- /dev/null
+++ b/arch/x86/kernel/acpi/Makefile
@@ -0,0 +1,5 @@
+ifeq ($(CONFIG_X86_32),y)
+include ${srctree}/arch/x86/kernel/acpi/Makefile_32
+else
+include ${srctree}/arch/x86/kernel/acpi/Makefile_64
+endif
diff --git a/arch/x86/kernel/acpi/Makefile_32 b/arch/x86/kernel/acpi/Makefile_32
new file mode 100644
index 00000000000..a4852a2e919
--- /dev/null
+++ b/arch/x86/kernel/acpi/Makefile_32
@@ -0,0 +1,10 @@
+obj-$(CONFIG_ACPI) += boot.o
+ifneq ($(CONFIG_PCI),)
+obj-$(CONFIG_X86_IO_APIC) += earlyquirk_32.o
+endif
+obj-$(CONFIG_ACPI_SLEEP) += sleep_32.o wakeup_32.o
+
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y += cstate.o processor.o
+endif
+
diff --git a/arch/x86/kernel/acpi/Makefile_64 b/arch/x86/kernel/acpi/Makefile_64
new file mode 100644
index 00000000000..629425bc002
--- /dev/null
+++ b/arch/x86/kernel/acpi/Makefile_64
@@ -0,0 +1,7 @@
+obj-y := boot.o
+obj-$(CONFIG_ACPI_SLEEP) += sleep_64.o wakeup_64.o
+
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y += processor.o cstate.o
+endif
+
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index cacdd883bf2..cacdd883bf2 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
diff --git a/arch/i386/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 2d39f55d29a..2d39f55d29a 100644
--- a/arch/i386/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/x86/kernel/acpi/earlyquirk_32.c
index 23f78efc577..23f78efc577 100644
--- a/arch/i386/kernel/acpi/earlyquirk.c
+++ b/arch/x86/kernel/acpi/earlyquirk_32.c
diff --git a/arch/i386/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c
index b54fded4983..b54fded4983 100644
--- a/arch/i386/kernel/acpi/processor.c
+++ b/arch/x86/kernel/acpi/processor.c
diff --git a/arch/i386/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep_32.c
index c42b5ab49de..c42b5ab49de 100644
--- a/arch/i386/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep_32.c
diff --git a/arch/x86_64/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep_64.c
index 79475d23707..79475d23707 100644
--- a/arch/x86_64/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep_64.c
diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/x86/kernel/acpi/wakeup_32.S
index f22ba8534d2..f22ba8534d2 100644
--- a/arch/i386/kernel/acpi/wakeup.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
new file mode 100644
index 00000000000..8b4357e1efe
--- /dev/null
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -0,0 +1,456 @@
+.text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/msr.h>
+
+# Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
+#
+# wakeup_code runs in real mode, and at unknown address (determined at run-time).
+# Therefore it must only use relative jumps/calls.
+#
+# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
+#
+# If physical address of wakeup_code is 0x12345, BIOS should call us with
+# cs = 0x1234, eip = 0x05
+#
+
+#define BEEP \
+ inb $97, %al; \
+ outb %al, $0x80; \
+ movb $3, %al; \
+ outb %al, $97; \
+ outb %al, $0x80; \
+ movb $-74, %al; \
+ outb %al, $67; \
+ outb %al, $0x80; \
+ movb $-119, %al; \
+ outb %al, $66; \
+ outb %al, $0x80; \
+ movb $15, %al; \
+ outb %al, $66;
+
+
+ALIGN
+ .align 16
+ENTRY(wakeup_start)
+wakeup_code:
+ wakeup_code_start = .
+ .code16
+
+# Running in *copy* of this code, somewhere in low 1MB.
+
+ movb $0xa1, %al ; outb %al, $0x80
+ cli
+ cld
+ # setup data segment
+ movw %cs, %ax
+ movw %ax, %ds # Make ds:0 point to wakeup_start
+ movw %ax, %ss
+
+ # Data segment must be set up before we can see whether to beep.
+ testl $4, realmode_flags - wakeup_code
+ jz 1f
+ BEEP
+1:
+
+ # Private stack is needed for ASUS board
+ mov $(wakeup_stack - wakeup_code), %sp
+
+ pushl $0 # Kill any dangerous flags
+ popfl
+
+ movl real_magic - wakeup_code, %eax
+ cmpl $0x12345678, %eax
+ jne bogus_real_magic
+
+ call verify_cpu # Verify the cpu supports long
+ # mode
+ testl %eax, %eax
+ jnz no_longmode
+
+ testl $1, realmode_flags - wakeup_code
+ jz 1f
+ lcall $0xc000,$3
+ movw %cs, %ax
+ movw %ax, %ds # Bios might have played with that
+ movw %ax, %ss
+1:
+
+ testl $2, realmode_flags - wakeup_code
+ jz 1f
+ mov video_mode - wakeup_code, %ax
+ call mode_set
+1:
+
+ movw $0xb800, %ax
+ movw %ax,%fs
+ movw $0x0e00 + 'L', %fs:(0x10)
+
+ movb $0xa2, %al ; outb %al, $0x80
+
+ mov %ds, %ax # Find 32bit wakeup_code addr
+ movzx %ax, %esi # (Convert %ds:gdt to a liner ptr)
+ shll $4, %esi
+ # Fix up the vectors
+ addl %esi, wakeup_32_vector - wakeup_code
+ addl %esi, wakeup_long64_vector - wakeup_code
+ addl %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer
+
+ lidtl %ds:idt_48a - wakeup_code
+ lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is
+ # appropriate
+
+ movl $1, %eax # protected mode (PE) bit
+ lmsw %ax # This is it!
+ jmp 1f
+1:
+
+ ljmpl *(wakeup_32_vector - wakeup_code)
+
+ .balign 4
+wakeup_32_vector:
+ .long wakeup_32 - wakeup_code
+ .word __KERNEL32_CS, 0
+
+ .code32
+wakeup_32:
+# Running in this code, but at low address; paging is not yet turned on.
+ movb $0xa5, %al ; outb %al, $0x80
+
+ movl $__KERNEL_DS, %eax
+ movl %eax, %ds
+
+ movw $0x0e00 + 'i', %ds:(0xb8012)
+ movb $0xa8, %al ; outb %al, $0x80;
+
+ /*
+ * Prepare for entering 64bits mode
+ */
+
+ /* Enable PAE */
+ xorl %eax, %eax
+ btsl $5, %eax
+ movl %eax, %cr4
+
+ /* Setup early boot stage 4 level pagetables */
+ leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax
+ movl %eax, %cr3
+
+ /* Check if nx is implemented */
+ movl $0x80000001, %eax
+ cpuid
+ movl %edx,%edi
+
+ /* Enable Long Mode */
+ xorl %eax, %eax
+ btsl $_EFER_LME, %eax
+
+ /* No Execute supported? */
+ btl $20,%edi
+ jnc 1f
+ btsl $_EFER_NX, %eax
+
+ /* Make changes effective */
+1: movl $MSR_EFER, %ecx
+ xorl %edx, %edx
+ wrmsr
+
+ xorl %eax, %eax
+ btsl $31, %eax /* Enable paging and in turn activate Long Mode */
+ btsl $0, %eax /* Enable protected mode */
+
+ /* Make changes effective */
+ movl %eax, %cr0
+
+ /* At this point:
+ CR4.PAE must be 1
+ CS.L must be 0
+ CR3 must point to PML4
+ Next instruction must be a branch
+ This must be on identity-mapped page
+ */
+ /*
+ * At this point we're in long mode but in 32bit compatibility mode
+ * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
+ * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we load
+ * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+ */
+
+ /* Finally jump in 64bit mode */
+ ljmp *(wakeup_long64_vector - wakeup_code)(%esi)
+
+ .balign 4
+wakeup_long64_vector:
+ .long wakeup_long64 - wakeup_code
+ .word __KERNEL_CS, 0
+
+.code64
+
+ /* Hooray, we are in Long 64-bit mode (but still running in
+ * low memory)
+ */
+wakeup_long64:
+ /*
+ * We must switch to a new descriptor in kernel space for the GDT
+ * because soon the kernel won't have access anymore to the userspace
+ * addresses where we're currently running on. We have to do that here
+ * because in 32bit we couldn't load a 64bit linear address.
+ */
+ lgdt cpu_gdt_descr
+
+ movw $0x0e00 + 'n', %ds:(0xb8014)
+ movb $0xa9, %al ; outb %al, $0x80
+
+ movq saved_magic, %rax
+ movq $0x123456789abcdef0, %rdx
+ cmpq %rdx, %rax
+ jne bogus_64_magic
+
+ movw $0x0e00 + 'u', %ds:(0xb8016)
+
+ nop
+ nop
+ movw $__KERNEL_DS, %ax
+ movw %ax, %ss
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %fs
+ movw %ax, %gs
+ movq saved_rsp, %rsp
+
+ movw $0x0e00 + 'x', %ds:(0xb8018)
+ movq saved_rbx, %rbx
+ movq saved_rdi, %rdi
+ movq saved_rsi, %rsi
+ movq saved_rbp, %rbp
+
+ movw $0x0e00 + '!', %ds:(0xb801a)
+ movq saved_rip, %rax
+ jmp *%rax
+
+.code32
+
+ .align 64
+gdta:
+ /* Its good to keep gdt in sync with one in trampoline.S */
+ .word 0, 0, 0, 0 # dummy
+ /* ??? Why I need the accessed bit set in order for this to work? */
+ .quad 0x00cf9b000000ffff # __KERNEL32_CS
+ .quad 0x00af9b000000ffff # __KERNEL_CS
+ .quad 0x00cf93000000ffff # __KERNEL_DS
+
+idt_48a:
+ .word 0 # idt limit = 0
+ .word 0, 0 # idt base = 0L
+
+gdt_48a:
+ .word 0x800 # gdt limit=2048,
+ # 256 GDT entries
+ .long gdta - wakeup_code # gdt base (relocated in later)
+
+real_magic: .quad 0
+video_mode: .quad 0
+realmode_flags: .quad 0
+
+.code16
+bogus_real_magic:
+ movb $0xba,%al ; outb %al,$0x80
+ jmp bogus_real_magic
+
+.code64
+bogus_64_magic:
+ movb $0xb3,%al ; outb %al,$0x80
+ jmp bogus_64_magic
+
+.code16
+no_longmode:
+ movb $0xbc,%al ; outb %al,$0x80
+ jmp no_longmode
+
+#include "../verify_cpu_64.S"
+
+/* This code uses an extended set of video mode numbers. These include:
+ * Aliases for standard modes
+ * NORMAL_VGA (-1)
+ * EXTENDED_VGA (-2)
+ * ASK_VGA (-3)
+ * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
+ * of compatibility when extending the table. These are between 0x00 and 0xff.
+ */
+#define VIDEO_FIRST_MENU 0x0000
+
+/* Standard BIOS video modes (BIOS number + 0x0100) */
+#define VIDEO_FIRST_BIOS 0x0100
+
+/* VESA BIOS video modes (VESA number + 0x0200) */
+#define VIDEO_FIRST_VESA 0x0200
+
+/* Video7 special modes (BIOS number + 0x0900) */
+#define VIDEO_FIRST_V7 0x0900
+
+# Setting of user mode (AX=mode ID) => CF=success
+
+# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
+# modes, we should probably compile in the video code from the boot
+# directory.
+.code16
+mode_set:
+ movw %ax, %bx
+ subb $VIDEO_FIRST_VESA>>8, %bh
+ cmpb $2, %bh
+ jb check_vesa
+
+setbad:
+ clc
+ ret
+
+check_vesa:
+ orw $0x4000, %bx # Use linear frame buffer
+ movw $0x4f02, %ax # VESA BIOS mode set call
+ int $0x10
+ cmpw $0x004f, %ax # AL=4f if implemented
+ jnz setbad # AH=0 if OK
+
+ stc
+ ret
+
+wakeup_stack_begin: # Stack grows down
+
+.org 0xff0
+wakeup_stack: # Just below end of page
+
+.org 0x1000
+ENTRY(wakeup_level4_pgt)
+ .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
+ .fill 510,8,0
+ /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
+ .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
+
+ENTRY(wakeup_end)
+
+##
+# acpi_copy_wakeup_routine
+#
+# Copy the above routine to low memory.
+#
+# Parameters:
+# %rdi: place to copy wakeup routine to
+#
+# Returned address is location of code in low memory (past data and stack)
+#
+ .code64
+ENTRY(acpi_copy_wakeup_routine)
+ pushq %rax
+ pushq %rdx
+
+ movl saved_video_mode, %edx
+ movl %edx, video_mode - wakeup_start (,%rdi)
+ movl acpi_realmode_flags, %edx
+ movl %edx, realmode_flags - wakeup_start (,%rdi)
+ movq $0x12345678, real_magic - wakeup_start (,%rdi)
+ movq $0x123456789abcdef0, %rdx
+ movq %rdx, saved_magic
+
+ movq saved_magic, %rax
+ movq $0x123456789abcdef0, %rdx
+ cmpq %rdx, %rax
+ jne bogus_64_magic
+
+ # restore the regs we used
+ popq %rdx
+ popq %rax
+ENTRY(do_suspend_lowlevel_s4bios)
+ ret
+
+ .align 2
+ .p2align 4,,15
+.globl do_suspend_lowlevel
+ .type do_suspend_lowlevel,@function
+do_suspend_lowlevel:
+.LFB5:
+ subq $8, %rsp
+ xorl %eax, %eax
+ call save_processor_state
+
+ movq %rsp, saved_context_esp(%rip)
+ movq %rax, saved_context_eax(%rip)
+ movq %rbx, saved_context_ebx(%rip)
+ movq %rcx, saved_context_ecx(%rip)
+ movq %rdx, saved_context_edx(%rip)
+ movq %rbp, saved_context_ebp(%rip)
+ movq %rsi, saved_context_esi(%rip)
+ movq %rdi, saved_context_edi(%rip)
+ movq %r8, saved_context_r08(%rip)
+ movq %r9, saved_context_r09(%rip)
+ movq %r10, saved_context_r10(%rip)
+ movq %r11, saved_context_r11(%rip)
+ movq %r12, saved_context_r12(%rip)
+ movq %r13, saved_context_r13(%rip)
+ movq %r14, saved_context_r14(%rip)
+ movq %r15, saved_context_r15(%rip)
+ pushfq ; popq saved_context_eflags(%rip)
+
+ movq $.L97, saved_rip(%rip)
+
+ movq %rsp,saved_rsp
+ movq %rbp,saved_rbp
+ movq %rbx,saved_rbx
+ movq %rdi,saved_rdi
+ movq %rsi,saved_rsi
+
+ addq $8, %rsp
+ movl $3, %edi
+ xorl %eax, %eax
+ jmp acpi_enter_sleep_state
+.L97:
+ .p2align 4,,7
+.L99:
+ .align 4
+ movl $24, %eax
+ movw %ax, %ds
+ movq saved_context+58(%rip), %rax
+ movq %rax, %cr4
+ movq saved_context+50(%rip), %rax
+ movq %rax, %cr3
+ movq saved_context+42(%rip), %rax
+ movq %rax, %cr2
+ movq saved_context+34(%rip), %rax
+ movq %rax, %cr0
+ pushq saved_context_eflags(%rip) ; popfq
+ movq saved_context_esp(%rip), %rsp
+ movq saved_context_ebp(%rip), %rbp
+ movq saved_context_eax(%rip), %rax
+ movq saved_context_ebx(%rip), %rbx
+ movq saved_context_ecx(%rip), %rcx
+ movq saved_context_edx(%rip), %rdx
+ movq saved_context_esi(%rip), %rsi
+ movq saved_context_edi(%rip), %rdi
+ movq saved_context_r08(%rip), %r8
+ movq saved_context_r09(%rip), %r9
+ movq saved_context_r10(%rip), %r10
+ movq saved_context_r11(%rip), %r11
+ movq saved_context_r12(%rip), %r12
+ movq saved_context_r13(%rip), %r13
+ movq saved_context_r14(%rip), %r14
+ movq saved_context_r15(%rip), %r15
+
+ xorl %eax, %eax
+ addq $8, %rsp
+ jmp restore_processor_state
+.LFE5:
+.Lfe5:
+ .size do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel
+
+.data
+ALIGN
+ENTRY(saved_rbp) .quad 0
+ENTRY(saved_rsi) .quad 0
+ENTRY(saved_rdi) .quad 0
+ENTRY(saved_rbx) .quad 0
+
+ENTRY(saved_rip) .quad 0
+ENTRY(saved_rsp) .quad 0
+
+ENTRY(saved_magic) .quad 0
diff --git a/arch/i386/kernel/alternative.c b/arch/x86/kernel/alternative.c
index bd72d94e713..bd72d94e713 100644
--- a/arch/i386/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86/kernel/aperture_64.c
index 8f681cae7bf..8f681cae7bf 100644
--- a/arch/x86_64/kernel/aperture.c
+++ b/arch/x86/kernel/aperture_64.c
diff --git a/arch/i386/kernel/apic.c b/arch/x86/kernel/apic_32.c
index 3d67ae18d76..3d67ae18d76 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/x86/kernel/apic_32.c
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86/kernel/apic_64.c
index 925758dbca0..925758dbca0 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86/kernel/apic_64.c
diff --git a/arch/i386/kernel/apm.c b/arch/x86/kernel/apm_32.c
index f02a8aca826..f02a8aca826 100644
--- a/arch/i386/kernel/apm.c
+++ b/arch/x86/kernel/apm_32.c
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
new file mode 100644
index 00000000000..cfa82c899f4
--- /dev/null
+++ b/arch/x86/kernel/asm-offsets.c
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "asm-offsets_32.c"
+#else
+# include "asm-offsets_64.c"
+#endif
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
new file mode 100644
index 00000000000..8029742c0fc
--- /dev/null
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -0,0 +1,147 @@
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/crypto.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <asm/ucontext.h>
+#include "sigframe_32.h"
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/elf.h>
+
+#include <xen/interface/xen.h>
+
+#ifdef CONFIG_LGUEST_GUEST
+#include <linux/lguest.h>
+#include "../../../drivers/lguest/lg.h"
+#endif
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+#define OFFSET(sym, str, mem) \
+ DEFINE(sym, offsetof(struct str, mem));
+
+/* workaround for a warning with -Wmissing-prototypes */
+void foo(void);
+
+void foo(void)
+{
+ OFFSET(SIGCONTEXT_eax, sigcontext, eax);
+ OFFSET(SIGCONTEXT_ebx, sigcontext, ebx);
+ OFFSET(SIGCONTEXT_ecx, sigcontext, ecx);
+ OFFSET(SIGCONTEXT_edx, sigcontext, edx);
+ OFFSET(SIGCONTEXT_esi, sigcontext, esi);
+ OFFSET(SIGCONTEXT_edi, sigcontext, edi);
+ OFFSET(SIGCONTEXT_ebp, sigcontext, ebp);
+ OFFSET(SIGCONTEXT_esp, sigcontext, esp);
+ OFFSET(SIGCONTEXT_eip, sigcontext, eip);
+ BLANK();
+
+ OFFSET(CPUINFO_x86, cpuinfo_x86, x86);
+ OFFSET(CPUINFO_x86_vendor, cpuinfo_x86, x86_vendor);
+ OFFSET(CPUINFO_x86_model, cpuinfo_x86, x86_model);
+ OFFSET(CPUINFO_x86_mask, cpuinfo_x86, x86_mask);
+ OFFSET(CPUINFO_hard_math, cpuinfo_x86, hard_math);
+ OFFSET(CPUINFO_cpuid_level, cpuinfo_x86, cpuid_level);
+ OFFSET(CPUINFO_x86_capability, cpuinfo_x86, x86_capability);
+ OFFSET(CPUINFO_x86_vendor_id, cpuinfo_x86, x86_vendor_id);
+ BLANK();
+
+ OFFSET(TI_task, thread_info, task);
+ OFFSET(TI_exec_domain, thread_info, exec_domain);
+ OFFSET(TI_flags, thread_info, flags);
+ OFFSET(TI_status, thread_info, status);
+ OFFSET(TI_preempt_count, thread_info, preempt_count);
+ OFFSET(TI_addr_limit, thread_info, addr_limit);
+ OFFSET(TI_restart_block, thread_info, restart_block);
+ OFFSET(TI_sysenter_return, thread_info, sysenter_return);
+ OFFSET(TI_cpu, thread_info, cpu);
+ BLANK();
+
+ OFFSET(GDS_size, Xgt_desc_struct, size);
+ OFFSET(GDS_address, Xgt_desc_struct, address);
+ OFFSET(GDS_pad, Xgt_desc_struct, pad);
+ BLANK();
+
+ OFFSET(PT_EBX, pt_regs, ebx);
+ OFFSET(PT_ECX, pt_regs, ecx);
+ OFFSET(PT_EDX, pt_regs, edx);
+ OFFSET(PT_ESI, pt_regs, esi);
+ OFFSET(PT_EDI, pt_regs, edi);
+ OFFSET(PT_EBP, pt_regs, ebp);
+ OFFSET(PT_EAX, pt_regs, eax);
+ OFFSET(PT_DS, pt_regs, xds);
+ OFFSET(PT_ES, pt_regs, xes);
+ OFFSET(PT_FS, pt_regs, xfs);
+ OFFSET(PT_ORIG_EAX, pt_regs, orig_eax);
+ OFFSET(PT_EIP, pt_regs, eip);
+ OFFSET(PT_CS, pt_regs, xcs);
+ OFFSET(PT_EFLAGS, pt_regs, eflags);
+ OFFSET(PT_OLDESP, pt_regs, esp);
+ OFFSET(PT_OLDSS, pt_regs, xss);
+ BLANK();
+
+ OFFSET(EXEC_DOMAIN_handler, exec_domain, handler);
+ OFFSET(RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext);
+ BLANK();
+
+ OFFSET(pbe_address, pbe, address);
+ OFFSET(pbe_orig_address, pbe, orig_address);
+ OFFSET(pbe_next, pbe, next);
+
+ /* Offset from the sysenter stack to tss.esp0 */
+ DEFINE(TSS_sysenter_esp0, offsetof(struct tss_struct, x86_tss.esp0) -
+ sizeof(struct tss_struct));
+
+ DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
+ DEFINE(PAGE_SHIFT_asm, PAGE_SHIFT);
+ DEFINE(PTRS_PER_PTE, PTRS_PER_PTE);
+ DEFINE(PTRS_PER_PMD, PTRS_PER_PMD);
+ DEFINE(PTRS_PER_PGD, PTRS_PER_PGD);
+
+ DEFINE(VDSO_PRELINK_asm, VDSO_PRELINK);
+
+ OFFSET(crypto_tfm_ctx_offset, crypto_tfm, __crt_ctx);
+
+#ifdef CONFIG_PARAVIRT
+ BLANK();
+ OFFSET(PARAVIRT_enabled, paravirt_ops, paravirt_enabled);
+ OFFSET(PARAVIRT_irq_disable, paravirt_ops, irq_disable);
+ OFFSET(PARAVIRT_irq_enable, paravirt_ops, irq_enable);
+ OFFSET(PARAVIRT_irq_enable_sysexit, paravirt_ops, irq_enable_sysexit);
+ OFFSET(PARAVIRT_iret, paravirt_ops, iret);
+ OFFSET(PARAVIRT_read_cr0, paravirt_ops, read_cr0);
+#endif
+
+#ifdef CONFIG_XEN
+ BLANK();
+ OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask);
+ OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending);
+#endif
+
+#ifdef CONFIG_LGUEST_GUEST
+ BLANK();
+ OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled);
+ OFFSET(LGUEST_PAGES_host_gdt_desc, lguest_pages, state.host_gdt_desc);
+ OFFSET(LGUEST_PAGES_host_idt_desc, lguest_pages, state.host_idt_desc);
+ OFFSET(LGUEST_PAGES_host_cr3, lguest_pages, state.host_cr3);
+ OFFSET(LGUEST_PAGES_host_sp, lguest_pages, state.host_sp);
+ OFFSET(LGUEST_PAGES_guest_gdt_desc, lguest_pages,state.guest_gdt_desc);
+ OFFSET(LGUEST_PAGES_guest_idt_desc, lguest_pages,state.guest_idt_desc);
+ OFFSET(LGUEST_PAGES_guest_gdt, lguest_pages, state.guest_gdt);
+ OFFSET(LGUEST_PAGES_regs_trapnum, lguest_pages, regs.trapnum);
+ OFFSET(LGUEST_PAGES_regs_errcode, lguest_pages, regs.errcode);
+ OFFSET(LGUEST_PAGES_regs, lguest_pages, regs);
+#endif
+}
diff --git a/arch/x86_64/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets_64.c
index 778953bc636..778953bc636 100644
--- a/arch/x86_64/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets_64.c
diff --git a/arch/x86_64/kernel/audit.c b/arch/x86/kernel/audit_64.c
index 06d3e5a14d9..06d3e5a14d9 100644
--- a/arch/x86_64/kernel/audit.c
+++ b/arch/x86/kernel/audit_64.c
diff --git a/arch/i386/kernel/bootflag.c b/arch/x86/kernel/bootflag.c
index 0b9860530a6..0b9860530a6 100644
--- a/arch/i386/kernel/bootflag.c
+++ b/arch/x86/kernel/bootflag.c
diff --git a/arch/x86_64/kernel/bugs.c b/arch/x86/kernel/bugs_64.c
index 4e5e9d364d6..4e5e9d364d6 100644
--- a/arch/x86_64/kernel/bugs.c
+++ b/arch/x86/kernel/bugs_64.c
diff --git a/arch/i386/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 778396c78d6..778396c78d6 100644
--- a/arch/i386/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
diff --git a/arch/i386/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 3e91d3ee26e..3e91d3ee26e 100644
--- a/arch/i386/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index dcf6bbb1c7c..dcf6bbb1c7c 100644
--- a/arch/i386/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
diff --git a/arch/i386/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 59266f03d1c..59266f03d1c 100644
--- a/arch/i386/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
diff --git a/arch/i386/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index 473eac883c7..473eac883c7 100644
--- a/arch/i386/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
diff --git a/arch/i386/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d506201d397..d506201d397 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
diff --git a/arch/i386/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index 2f6432cef6f..2f6432cef6f 100644
--- a/arch/i386/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig
index d8c6f132dc7..d8c6f132dc7 100644
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile
index 560f7760dae..560f7760dae 100644
--- a/arch/i386/kernel/cpu/cpufreq/Makefile
+++ b/arch/x86/kernel/cpu/cpufreq/Makefile
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 705e13a3078..705e13a3078 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
index 66acd503991..66acd503991 100644
--- a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
diff --git a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
index f43d98e11cc..f43d98e11cc 100644
--- a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c
+++ b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
diff --git a/arch/i386/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
index f317276afa7..f317276afa7 100644
--- a/arch/i386/kernel/cpu/cpufreq/elanfreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
index 461dabc4e49..461dabc4e49 100644
--- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c
index f0cce3c2dc3..f0cce3c2dc3 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/x86/kernel/cpu/cpufreq/longhaul.h
index 4fcc320997d..4fcc320997d 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.h
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.h
diff --git a/arch/i386/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c
index b2689514295..b2689514295 100644
--- a/arch/i386/kernel/cpu/cpufreq/longrun.c
+++ b/arch/x86/kernel/cpu/cpufreq/longrun.c
diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 4c76b511e19..4c76b511e19 100644
--- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
index f89524051e4..f89524051e4 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
index ca3e1d34188..ca3e1d34188 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.h b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
index f8a63b3664e..f8a63b3664e 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 34ed53a0673..34ed53a0673 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index b06c812208c..b06c812208c 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
diff --git a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c
index b8fb4b521c6..b8fb4b521c6 100644
--- a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c
+++ b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index 6c5dc2c85ae..6c5dc2c85ae 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index a5b2346faf1..a5b2346faf1 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
index b1acc8ce316..b1acc8ce316 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
index b11bcc608ca..b11bcc608ca 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
index e1c509aa305..e1c509aa305 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 122d2d75aa9..122d2d75aa9 100644
--- a/arch/i386/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
diff --git a/arch/i386/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index dc4e08147b1..dc4e08147b1 100644
--- a/arch/i386/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index db6c25aa577..db6c25aa577 100644
--- a/arch/i386/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
diff --git a/arch/i386/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile
index f1ebe1c1c17..f1ebe1c1c17 100644
--- a/arch/i386/kernel/cpu/mcheck/Makefile
+++ b/arch/x86/kernel/cpu/mcheck/Makefile
diff --git a/arch/i386/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c
index eef63e3630c..eef63e3630c 100644
--- a/arch/i386/kernel/cpu/mcheck/k7.c
+++ b/arch/x86/kernel/cpu/mcheck/k7.c
diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 34c781eddee..34c781eddee 100644
--- a/arch/i386/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
diff --git a/arch/i386/kernel/cpu/mcheck/mce.h b/arch/x86/kernel/cpu/mcheck/mce.h
index 81fb6e2d35f..81fb6e2d35f 100644
--- a/arch/i386/kernel/cpu/mcheck/mce.h
+++ b/arch/x86/kernel/cpu/mcheck/mce.h
diff --git a/arch/i386/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c
index bf39409b383..bf39409b383 100644
--- a/arch/i386/kernel/cpu/mcheck/non-fatal.c
+++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c
diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index 1509edfb231..1509edfb231 100644
--- a/arch/i386/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
diff --git a/arch/i386/kernel/cpu/mcheck/p5.c b/arch/x86/kernel/cpu/mcheck/p5.c
index 94bc43d950c..94bc43d950c 100644
--- a/arch/i386/kernel/cpu/mcheck/p5.c
+++ b/arch/x86/kernel/cpu/mcheck/p5.c
diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/x86/kernel/cpu/mcheck/p6.c
index deeae42ce19..deeae42ce19 100644
--- a/arch/i386/kernel/cpu/mcheck/p6.c
+++ b/arch/x86/kernel/cpu/mcheck/p6.c
diff --git a/arch/i386/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 1203dc5ab87..1203dc5ab87 100644
--- a/arch/i386/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
diff --git a/arch/i386/kernel/cpu/mcheck/winchip.c b/arch/x86/kernel/cpu/mcheck/winchip.c
index 9e424b6c293..9e424b6c293 100644
--- a/arch/i386/kernel/cpu/mcheck/winchip.c
+++ b/arch/x86/kernel/cpu/mcheck/winchip.c
diff --git a/arch/i386/kernel/cpu/mtrr/Makefile b/arch/x86/kernel/cpu/mtrr/Makefile
index 191fc053364..191fc053364 100644
--- a/arch/i386/kernel/cpu/mtrr/Makefile
+++ b/arch/x86/kernel/cpu/mtrr/Makefile
diff --git a/arch/i386/kernel/cpu/mtrr/amd.c b/arch/x86/kernel/cpu/mtrr/amd.c
index 0949cdbf848..0949cdbf848 100644
--- a/arch/i386/kernel/cpu/mtrr/amd.c
+++ b/arch/x86/kernel/cpu/mtrr/amd.c
diff --git a/arch/i386/kernel/cpu/mtrr/centaur.c b/arch/x86/kernel/cpu/mtrr/centaur.c
index cb9aa3a7a7a..cb9aa3a7a7a 100644
--- a/arch/i386/kernel/cpu/mtrr/centaur.c
+++ b/arch/x86/kernel/cpu/mtrr/centaur.c
diff --git a/arch/i386/kernel/cpu/mtrr/cyrix.c b/arch/x86/kernel/cpu/mtrr/cyrix.c
index 2287d4863a8..2287d4863a8 100644
--- a/arch/i386/kernel/cpu/mtrr/cyrix.c
+++ b/arch/x86/kernel/cpu/mtrr/cyrix.c
diff --git a/arch/i386/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 56f64e34829..56f64e34829 100644
--- a/arch/i386/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index c7d8f175674..c7d8f175674 100644
--- a/arch/i386/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index c48b6fea5ab..c48b6fea5ab 100644
--- a/arch/i386/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
diff --git a/arch/i386/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index 289dfe6030e..289dfe6030e 100644
--- a/arch/i386/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
diff --git a/arch/x86/kernel/cpu/mtrr/state.c b/arch/x86/kernel/cpu/mtrr/state.c
new file mode 100644
index 00000000000..49e20c2afcd
--- /dev/null
+++ b/arch/x86/kernel/cpu/mtrr/state.c
@@ -0,0 +1,79 @@
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include <asm/processor-cyrix.h>
+#include "mtrr.h"
+
+
+/* Put the processor into a state where MTRRs can be safely set */
+void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
+{
+ unsigned int cr0;
+
+ /* Disable interrupts locally */
+ local_irq_save(ctxt->flags);
+
+ if (use_intel() || is_cpu(CYRIX)) {
+
+ /* Save value of CR4 and clear Page Global Enable (bit 7) */
+ if ( cpu_has_pge ) {
+ ctxt->cr4val = read_cr4();
+ write_cr4(ctxt->cr4val & ~X86_CR4_PGE);
+ }
+
+ /* Disable and flush caches. Note that wbinvd flushes the TLBs as
+ a side-effect */
+ cr0 = read_cr0() | 0x40000000;
+ wbinvd();
+ write_cr0(cr0);
+ wbinvd();
+
+ if (use_intel())
+ /* Save MTRR state */
+ rdmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
+ else
+ /* Cyrix ARRs - everything else were excluded at the top */
+ ctxt->ccr3 = getCx86(CX86_CCR3);
+ }
+}
+
+void set_mtrr_cache_disable(struct set_mtrr_context *ctxt)
+{
+ if (use_intel())
+ /* Disable MTRRs, and set the default type to uncached */
+ mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo & 0xf300UL,
+ ctxt->deftype_hi);
+ else if (is_cpu(CYRIX))
+ /* Cyrix ARRs - everything else were excluded at the top */
+ setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10);
+}
+
+/* Restore the processor after a set_mtrr_prepare */
+void set_mtrr_done(struct set_mtrr_context *ctxt)
+{
+ if (use_intel() || is_cpu(CYRIX)) {
+
+ /* Flush caches and TLBs */
+ wbinvd();
+
+ /* Restore MTRRdefType */
+ if (use_intel())
+ /* Intel (P6) standard MTRRs */
+ mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
+ else
+ /* Cyrix ARRs - everything else was excluded at the top */
+ setCx86(CX86_CCR3, ctxt->ccr3);
+
+ /* Enable caches */
+ write_cr0(read_cr0() & 0xbfffffff);
+
+ /* Restore value of CR4 */
+ if ( cpu_has_pge )
+ write_cr4(ctxt->cr4val);
+ }
+ /* Re-enable interrupts locally (if enabled previously) */
+ local_irq_restore(ctxt->flags);
+}
+
diff --git a/arch/i386/kernel/cpu/nexgen.c b/arch/x86/kernel/cpu/nexgen.c
index 961fbe1a748..961fbe1a748 100644
--- a/arch/i386/kernel/cpu/nexgen.c
+++ b/arch/x86/kernel/cpu/nexgen.c
diff --git a/arch/i386/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 93fecd4b03d..93fecd4b03d 100644
--- a/arch/i386/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
diff --git a/arch/i386/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 1e31b6caffb..1e31b6caffb 100644
--- a/arch/i386/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c
index 200fb3f9ebf..200fb3f9ebf 100644
--- a/arch/i386/kernel/cpu/transmeta.c
+++ b/arch/x86/kernel/cpu/transmeta.c
diff --git a/arch/i386/kernel/cpu/umc.c b/arch/x86/kernel/cpu/umc.c
index a7a4e75bdcd..a7a4e75bdcd 100644
--- a/arch/i386/kernel/cpu/umc.c
+++ b/arch/x86/kernel/cpu/umc.c
diff --git a/arch/x86_64/kernel/cpufreq/Kconfig b/arch/x86/kernel/cpufreq/Kconfig
index a3fd51926cb..a3fd51926cb 100644
--- a/arch/x86_64/kernel/cpufreq/Kconfig
+++ b/arch/x86/kernel/cpufreq/Kconfig
diff --git a/arch/i386/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 5c2faa10e9f..5c2faa10e9f 100644
--- a/arch/i386/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
diff --git a/arch/i386/kernel/crash.c b/arch/x86/kernel/crash_32.c
index 53589d1b1a0..53589d1b1a0 100644
--- a/arch/i386/kernel/crash.c
+++ b/arch/x86/kernel/crash_32.c
diff --git a/arch/x86_64/kernel/crash.c b/arch/x86/kernel/crash_64.c
index 13432a1ae90..13432a1ae90 100644
--- a/arch/x86_64/kernel/crash.c
+++ b/arch/x86/kernel/crash_64.c
diff --git a/arch/i386/kernel/crash_dump.c b/arch/x86/kernel/crash_dump_32.c
index 3f532df488b..3f532df488b 100644
--- a/arch/i386/kernel/crash_dump.c
+++ b/arch/x86/kernel/crash_dump_32.c
diff --git a/arch/x86_64/kernel/crash_dump.c b/arch/x86/kernel/crash_dump_64.c
index 942deac4d43..942deac4d43 100644
--- a/arch/x86_64/kernel/crash_dump.c
+++ b/arch/x86/kernel/crash_dump_64.c
diff --git a/arch/i386/kernel/doublefault.c b/arch/x86/kernel/doublefault_32.c
index 40978af630e..40978af630e 100644
--- a/arch/i386/kernel/doublefault.c
+++ b/arch/x86/kernel/doublefault_32.c
diff --git a/arch/i386/kernel/e820.c b/arch/x86/kernel/e820_32.c
index 3c86b979a40..3c86b979a40 100644
--- a/arch/i386/kernel/e820.c
+++ b/arch/x86/kernel/e820_32.c
diff --git a/arch/x86_64/kernel/e820.c b/arch/x86/kernel/e820_64.c
index 0f4d5e209e9..0f4d5e209e9 100644
--- a/arch/x86_64/kernel/e820.c
+++ b/arch/x86/kernel/e820_64.c
diff --git a/arch/x86_64/kernel/early-quirks.c b/arch/x86/kernel/early-quirks_64.c
index 13aa4fd728f..13aa4fd728f 100644
--- a/arch/x86_64/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks_64.c
diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index fd9aff3f389..fd9aff3f389 100644
--- a/arch/x86_64/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
diff --git a/arch/i386/kernel/efi.c b/arch/x86/kernel/efi_32.c
index 2452c6fbe99..2452c6fbe99 100644
--- a/arch/i386/kernel/efi.c
+++ b/arch/x86/kernel/efi_32.c
diff --git a/arch/i386/kernel/efi_stub.S b/arch/x86/kernel/efi_stub_32.S
index ef00bb77d7e..ef00bb77d7e 100644
--- a/arch/i386/kernel/efi_stub.S
+++ b/arch/x86/kernel/efi_stub_32.S
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
new file mode 100644
index 00000000000..290b7bc82da
--- /dev/null
+++ b/arch/x86/kernel/entry_32.S
@@ -0,0 +1,1112 @@
+/*
+ * linux/arch/i386/entry.S
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+/*
+ * entry.S contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all interrupts
+ * and faults that can result in a task-switch.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * I changed all the .align's to 4 (16 byte alignment), as that's faster
+ * on a 486.
+ *
+ * Stack layout in 'syscall_exit':
+ * ptrace needs to have all regs on the stack.
+ * if the order here is changed, it needs to be
+ * updated in fork.c:copy_process, signal.c:do_signal,
+ * ptrace.c and ptrace.h
+ *
+ * 0(%esp) - %ebx
+ * 4(%esp) - %ecx
+ * 8(%esp) - %edx
+ * C(%esp) - %esi
+ * 10(%esp) - %edi
+ * 14(%esp) - %ebp
+ * 18(%esp) - %eax
+ * 1C(%esp) - %ds
+ * 20(%esp) - %es
+ * 24(%esp) - %fs
+ * 28(%esp) - orig_eax
+ * 2C(%esp) - %eip
+ * 30(%esp) - %cs
+ * 34(%esp) - %eflags
+ * 38(%esp) - %oldesp
+ * 3C(%esp) - %oldss
+ *
+ * "current" is in register %ebx during any slow entries.
+ */
+
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/irqflags.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/desc.h>
+#include <asm/percpu.h>
+#include <asm/dwarf2.h>
+#include "irq_vectors.h"
+
+/*
+ * We use macros for low-level operations which need to be overridden
+ * for paravirtualization. The following will never clobber any registers:
+ * INTERRUPT_RETURN (aka. "iret")
+ * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
+ * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
+ *
+ * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
+ * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
+ * Allowing a register to be clobbered can shrink the paravirt replacement
+ * enough to patch inline, increasing performance.
+ */
+
+#define nr_syscalls ((syscall_table_size)/4)
+
+CF_MASK = 0x00000001
+TF_MASK = 0x00000100
+IF_MASK = 0x00000200
+DF_MASK = 0x00000400
+NT_MASK = 0x00004000
+VM_MASK = 0x00020000
+
+#ifdef CONFIG_PREEMPT
+#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
+#else
+#define preempt_stop(clobbers)
+#define resume_kernel restore_nocheck
+#endif
+
+.macro TRACE_IRQS_IRET
+#ifdef CONFIG_TRACE_IRQFLAGS
+ testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off?
+ jz 1f
+ TRACE_IRQS_ON
+1:
+#endif
+.endm
+
+#ifdef CONFIG_VM86
+#define resume_userspace_sig check_userspace
+#else
+#define resume_userspace_sig resume_userspace
+#endif
+
+#define SAVE_ALL \
+ cld; \
+ pushl %fs; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ /*CFI_REL_OFFSET fs, 0;*/\
+ pushl %es; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ /*CFI_REL_OFFSET es, 0;*/\
+ pushl %ds; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ /*CFI_REL_OFFSET ds, 0;*/\
+ pushl %eax; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET eax, 0;\
+ pushl %ebp; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET ebp, 0;\
+ pushl %edi; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET edi, 0;\
+ pushl %esi; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET esi, 0;\
+ pushl %edx; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET edx, 0;\
+ pushl %ecx; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET ecx, 0;\
+ pushl %ebx; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET ebx, 0;\
+ movl $(__USER_DS), %edx; \
+ movl %edx, %ds; \
+ movl %edx, %es; \
+ movl $(__KERNEL_PERCPU), %edx; \
+ movl %edx, %fs
+
+#define RESTORE_INT_REGS \
+ popl %ebx; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE ebx;\
+ popl %ecx; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE ecx;\
+ popl %edx; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE edx;\
+ popl %esi; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE esi;\
+ popl %edi; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE edi;\
+ popl %ebp; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE ebp;\
+ popl %eax; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE eax
+
+#define RESTORE_REGS \
+ RESTORE_INT_REGS; \
+1: popl %ds; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ /*CFI_RESTORE ds;*/\
+2: popl %es; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ /*CFI_RESTORE es;*/\
+3: popl %fs; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ /*CFI_RESTORE fs;*/\
+.pushsection .fixup,"ax"; \
+4: movl $0,(%esp); \
+ jmp 1b; \
+5: movl $0,(%esp); \
+ jmp 2b; \
+6: movl $0,(%esp); \
+ jmp 3b; \
+.section __ex_table,"a";\
+ .align 4; \
+ .long 1b,4b; \
+ .long 2b,5b; \
+ .long 3b,6b; \
+.popsection
+
+#define RING0_INT_FRAME \
+ CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
+ CFI_DEF_CFA esp, 3*4;\
+ /*CFI_OFFSET cs, -2*4;*/\
+ CFI_OFFSET eip, -3*4
+
+#define RING0_EC_FRAME \
+ CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
+ CFI_DEF_CFA esp, 4*4;\
+ /*CFI_OFFSET cs, -2*4;*/\
+ CFI_OFFSET eip, -3*4
+
+#define RING0_PTREGS_FRAME \
+ CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
+ CFI_DEF_CFA esp, PT_OLDESP-PT_EBX;\
+ /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/\
+ CFI_OFFSET eip, PT_EIP-PT_OLDESP;\
+ /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/\
+ /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/\
+ CFI_OFFSET eax, PT_EAX-PT_OLDESP;\
+ CFI_OFFSET ebp, PT_EBP-PT_OLDESP;\
+ CFI_OFFSET edi, PT_EDI-PT_OLDESP;\
+ CFI_OFFSET esi, PT_ESI-PT_OLDESP;\
+ CFI_OFFSET edx, PT_EDX-PT_OLDESP;\
+ CFI_OFFSET ecx, PT_ECX-PT_OLDESP;\
+ CFI_OFFSET ebx, PT_EBX-PT_OLDESP
+
+ENTRY(ret_from_fork)
+ CFI_STARTPROC
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ call schedule_tail
+ GET_THREAD_INFO(%ebp)
+ popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
+ pushl $0x0202 # Reset kernel eflags
+ CFI_ADJUST_CFA_OFFSET 4
+ popfl
+ CFI_ADJUST_CFA_OFFSET -4
+ jmp syscall_exit
+ CFI_ENDPROC
+END(ret_from_fork)
+
+/*
+ * Return to user mode is not as complex as all this looks,
+ * but we want the default path for a system call return to
+ * go as quickly as possible which is why some of this is
+ * less clear than it otherwise should be.
+ */
+
+ # userspace resumption stub bypassing syscall exit tracing
+ ALIGN
+ RING0_PTREGS_FRAME
+ret_from_exception:
+ preempt_stop(CLBR_ANY)
+ret_from_intr:
+ GET_THREAD_INFO(%ebp)
+check_userspace:
+ movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS
+ movb PT_CS(%esp), %al
+ andl $(VM_MASK | SEGMENT_RPL_MASK), %eax
+ cmpl $USER_RPL, %eax
+ jb resume_kernel # not returning to v8086 or userspace
+
+ENTRY(resume_userspace)
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
+ # setting need_resched or sigpending
+ # between sampling and the iret
+ movl TI_flags(%ebp), %ecx
+ andl $_TIF_WORK_MASK, %ecx # is there any work to be done on
+ # int/exception return?
+ jne work_pending
+ jmp restore_all
+END(ret_from_exception)
+
+#ifdef CONFIG_PREEMPT
+ENTRY(resume_kernel)
+ DISABLE_INTERRUPTS(CLBR_ANY)
+ cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ?
+ jnz restore_nocheck
+need_resched:
+ movl TI_flags(%ebp), %ecx # need_resched set ?
+ testb $_TIF_NEED_RESCHED, %cl
+ jz restore_all
+ testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off (exception path) ?
+ jz restore_all
+ call preempt_schedule_irq
+ jmp need_resched
+END(resume_kernel)
+#endif
+ CFI_ENDPROC
+
+/* SYSENTER_RETURN points to after the "sysenter" instruction in
+ the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */
+
+ # sysenter call handler stub
+ENTRY(sysenter_entry)
+ CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
+ CFI_DEF_CFA esp, 0
+ CFI_REGISTER esp, ebp
+ movl TSS_sysenter_esp0(%esp),%esp
+sysenter_past_esp:
+ /*
+ * No need to follow this irqs on/off section: the syscall
+ * disabled irqs and here we enable it straight after entry:
+ */
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ pushl $(__USER_DS)
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET ss, 0*/
+ pushl %ebp
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET esp, 0
+ pushfl
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $(__USER_CS)
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET cs, 0*/
+ /*
+ * Push current_thread_info()->sysenter_return to the stack.
+ * A tiny bit of offset fixup is necessary - 4*4 means the 4 words
+ * pushed above; +8 corresponds to copy_thread's esp0 setting.
+ */
+ pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET eip, 0
+
+/*
+ * Load the potential sixth argument from user stack.
+ * Careful about security.
+ */
+ cmpl $__PAGE_OFFSET-3,%ebp
+ jae syscall_fault
+1: movl (%ebp),%ebp
+.section __ex_table,"a"
+ .align 4
+ .long 1b,syscall_fault
+.previous
+
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ GET_THREAD_INFO(%ebp)
+
+ /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
+ testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+ jnz syscall_trace_entry
+ cmpl $(nr_syscalls), %eax
+ jae syscall_badsys
+ call *sys_call_table(,%eax,4)
+ movl %eax,PT_EAX(%esp)
+ DISABLE_INTERRUPTS(CLBR_ANY)
+ TRACE_IRQS_OFF
+ movl TI_flags(%ebp), %ecx
+ testw $_TIF_ALLWORK_MASK, %cx
+ jne syscall_exit_work
+/* if something modifies registers it must also disable sysexit */
+ movl PT_EIP(%esp), %edx
+ movl PT_OLDESP(%esp), %ecx
+ xorl %ebp,%ebp
+ TRACE_IRQS_ON
+1: mov PT_FS(%esp), %fs
+ ENABLE_INTERRUPTS_SYSEXIT
+ CFI_ENDPROC
+.pushsection .fixup,"ax"
+2: movl $0,PT_FS(%esp)
+ jmp 1b
+.section __ex_table,"a"
+ .align 4
+ .long 1b,2b
+.popsection
+ENDPROC(sysenter_entry)
+
+ # system call handler stub
+ENTRY(system_call)
+ RING0_INT_FRAME # can't unwind into user space anyway
+ pushl %eax # save orig_eax
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ GET_THREAD_INFO(%ebp)
+ # system call tracing in operation / emulation
+ /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
+ testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+ jnz syscall_trace_entry
+ cmpl $(nr_syscalls), %eax
+ jae syscall_badsys
+syscall_call:
+ call *sys_call_table(,%eax,4)
+ movl %eax,PT_EAX(%esp) # store the return value
+syscall_exit:
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
+ # setting need_resched or sigpending
+ # between sampling and the iret
+ TRACE_IRQS_OFF
+ testl $TF_MASK,PT_EFLAGS(%esp) # If tracing set singlestep flag on exit
+ jz no_singlestep
+ orl $_TIF_SINGLESTEP,TI_flags(%ebp)
+no_singlestep:
+ movl TI_flags(%ebp), %ecx
+ testw $_TIF_ALLWORK_MASK, %cx # current->work
+ jne syscall_exit_work
+
+restore_all:
+ movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
+ # Warning: PT_OLDSS(%esp) contains the wrong/random values if we
+ # are returning to the kernel.
+ # See comments in process.c:copy_thread() for details.
+ movb PT_OLDSS(%esp), %ah
+ movb PT_CS(%esp), %al
+ andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+ cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
+ CFI_REMEMBER_STATE
+ je ldt_ss # returning to user-space with LDT SS
+restore_nocheck:
+ TRACE_IRQS_IRET
+restore_nocheck_notrace:
+ RESTORE_REGS
+ addl $4, %esp # skip orig_eax/error_code
+ CFI_ADJUST_CFA_OFFSET -4
+1: INTERRUPT_RETURN
+.section .fixup,"ax"
+iret_exc:
+ pushl $0 # no error code
+ pushl $do_iret_error
+ jmp error_code
+.previous
+.section __ex_table,"a"
+ .align 4
+ .long 1b,iret_exc
+.previous
+
+ CFI_RESTORE_STATE
+ldt_ss:
+ larl PT_OLDSS(%esp), %eax
+ jnz restore_nocheck
+ testl $0x00400000, %eax # returning to 32bit stack?
+ jnz restore_nocheck # allright, normal return
+
+#ifdef CONFIG_PARAVIRT
+ /*
+ * The kernel can't run on a non-flat stack if paravirt mode
+ * is active. Rather than try to fixup the high bits of
+ * ESP, bypass this code entirely. This may break DOSemu
+ * and/or Wine support in a paravirt VM, although the option
+ * is still available to implement the setting of the high
+ * 16-bits in the INTERRUPT_RETURN paravirt-op.
+ */
+ cmpl $0, paravirt_ops+PARAVIRT_enabled
+ jne restore_nocheck
+#endif
+
+ /* If returning to userspace with 16bit stack,
+ * try to fix the higher word of ESP, as the CPU
+ * won't restore it.
+ * This is an "official" bug of all the x86-compatible
+ * CPUs, which we can try to work around to make
+ * dosemu and wine happy. */
+ movl PT_OLDESP(%esp), %eax
+ movl %esp, %edx
+ call patch_espfix_desc
+ pushl $__ESPFIX_SS
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ DISABLE_INTERRUPTS(CLBR_EAX)
+ TRACE_IRQS_OFF
+ lss (%esp), %esp
+ CFI_ADJUST_CFA_OFFSET -8
+ jmp restore_nocheck
+ CFI_ENDPROC
+ENDPROC(system_call)
+
+ # perform work that needs to be done immediately before resumption
+ ALIGN
+ RING0_PTREGS_FRAME # can't unwind into user space anyway
+work_pending:
+ testb $_TIF_NEED_RESCHED, %cl
+ jz work_notifysig
+work_resched:
+ call schedule
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
+ # setting need_resched or sigpending
+ # between sampling and the iret
+ TRACE_IRQS_OFF
+ movl TI_flags(%ebp), %ecx
+ andl $_TIF_WORK_MASK, %ecx # is there any work to be done other
+ # than syscall tracing?
+ jz restore_all
+ testb $_TIF_NEED_RESCHED, %cl
+ jnz work_resched
+
+work_notifysig: # deal with pending signals and
+ # notify-resume requests
+#ifdef CONFIG_VM86
+ testl $VM_MASK, PT_EFLAGS(%esp)
+ movl %esp, %eax
+ jne work_notifysig_v86 # returning to kernel-space or
+ # vm86-space
+ xorl %edx, %edx
+ call do_notify_resume
+ jmp resume_userspace_sig
+
+ ALIGN
+work_notifysig_v86:
+ pushl %ecx # save ti_flags for do_notify_resume
+ CFI_ADJUST_CFA_OFFSET 4
+ call save_v86_state # %eax contains pt_regs pointer
+ popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ movl %eax, %esp
+#else
+ movl %esp, %eax
+#endif
+ xorl %edx, %edx
+ call do_notify_resume
+ jmp resume_userspace_sig
+END(work_pending)
+
+ # perform syscall exit tracing
+ ALIGN
+syscall_trace_entry:
+ movl $-ENOSYS,PT_EAX(%esp)
+ movl %esp, %eax
+ xorl %edx,%edx
+ call do_syscall_trace
+ cmpl $0, %eax
+ jne resume_userspace # ret != 0 -> running under PTRACE_SYSEMU,
+ # so must skip actual syscall
+ movl PT_ORIG_EAX(%esp), %eax
+ cmpl $(nr_syscalls), %eax
+ jnae syscall_call
+ jmp syscall_exit
+END(syscall_trace_entry)
+
+ # perform syscall exit tracing
+ ALIGN
+syscall_exit_work:
+ testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
+ jz work_pending
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_ANY) # could let do_syscall_trace() call
+ # schedule() instead
+ movl %esp, %eax
+ movl $1, %edx
+ call do_syscall_trace
+ jmp resume_userspace
+END(syscall_exit_work)
+ CFI_ENDPROC
+
+ RING0_INT_FRAME # can't unwind into user space anyway
+syscall_fault:
+ pushl %eax # save orig_eax
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ GET_THREAD_INFO(%ebp)
+ movl $-EFAULT,PT_EAX(%esp)
+ jmp resume_userspace
+END(syscall_fault)
+
+syscall_badsys:
+ movl $-ENOSYS,PT_EAX(%esp)
+ jmp resume_userspace
+END(syscall_badsys)
+ CFI_ENDPROC
+
+#define FIXUP_ESPFIX_STACK \
+ /* since we are on a wrong stack, we cant make it a C code :( */ \
+ PER_CPU(gdt_page, %ebx); \
+ GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \
+ addl %esp, %eax; \
+ pushl $__KERNEL_DS; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ pushl %eax; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ lss (%esp), %esp; \
+ CFI_ADJUST_CFA_OFFSET -8;
+#define UNWIND_ESPFIX_STACK \
+ movl %ss, %eax; \
+ /* see if on espfix stack */ \
+ cmpw $__ESPFIX_SS, %ax; \
+ jne 27f; \
+ movl $__KERNEL_DS, %eax; \
+ movl %eax, %ds; \
+ movl %eax, %es; \
+ /* switch to normal stack */ \
+ FIXUP_ESPFIX_STACK; \
+27:;
+
+/*
+ * Build the entry stubs and pointer table with
+ * some assembler magic.
+ */
+.data
+ENTRY(interrupt)
+.text
+
+ENTRY(irq_entries_start)
+ RING0_INT_FRAME
+vector=0
+.rept NR_IRQS
+ ALIGN
+ .if vector
+ CFI_ADJUST_CFA_OFFSET -4
+ .endif
+1: pushl $~(vector)
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp common_interrupt
+ .previous
+ .long 1b
+ .text
+vector=vector+1
+.endr
+END(irq_entries_start)
+
+.previous
+END(interrupt)
+.previous
+
+/*
+ * the CPU automatically disables interrupts when executing an IRQ vector,
+ * so IRQ-flags tracing has to follow that:
+ */
+ ALIGN
+common_interrupt:
+ SAVE_ALL
+ TRACE_IRQS_OFF
+ movl %esp,%eax
+ call do_IRQ
+ jmp ret_from_intr
+ENDPROC(common_interrupt)
+ CFI_ENDPROC
+
+#define BUILD_INTERRUPT(name, nr) \
+ENTRY(name) \
+ RING0_INT_FRAME; \
+ pushl $~(nr); \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ SAVE_ALL; \
+ TRACE_IRQS_OFF \
+ movl %esp,%eax; \
+ call smp_##name; \
+ jmp ret_from_intr; \
+ CFI_ENDPROC; \
+ENDPROC(name)
+
+/* The include is where all of the SMP etc. interrupts come from */
+#include "entry_arch.h"
+
+KPROBE_ENTRY(page_fault)
+ RING0_EC_FRAME
+ pushl $do_page_fault
+ CFI_ADJUST_CFA_OFFSET 4
+ ALIGN
+error_code:
+ /* the function address is in %fs's slot on the stack */
+ pushl %es
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET es, 0*/
+ pushl %ds
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET ds, 0*/
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET eax, 0
+ pushl %ebp
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebp, 0
+ pushl %edi
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edi, 0
+ pushl %esi
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET esi, 0
+ pushl %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edx, 0
+ pushl %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx, 0
+ pushl %ebx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebx, 0
+ cld
+ pushl %fs
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET fs, 0*/
+ movl $(__KERNEL_PERCPU), %ecx
+ movl %ecx, %fs
+ UNWIND_ESPFIX_STACK
+ popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ /*CFI_REGISTER es, ecx*/
+ movl PT_FS(%esp), %edi # get the function address
+ movl PT_ORIG_EAX(%esp), %edx # get the error code
+ movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
+ mov %ecx, PT_FS(%esp)
+ /*CFI_REL_OFFSET fs, ES*/
+ movl $(__USER_DS), %ecx
+ movl %ecx, %ds
+ movl %ecx, %es
+ movl %esp,%eax # pt_regs pointer
+ call *%edi
+ jmp ret_from_exception
+ CFI_ENDPROC
+KPROBE_END(page_fault)
+
+ENTRY(coprocessor_error)
+ RING0_INT_FRAME
+ pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_coprocessor_error
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(coprocessor_error)
+
+ENTRY(simd_coprocessor_error)
+ RING0_INT_FRAME
+ pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_simd_coprocessor_error
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(simd_coprocessor_error)
+
+ENTRY(device_not_available)
+ RING0_INT_FRAME
+ pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ GET_CR0_INTO_EAX
+ testl $0x4, %eax # EM (math emulation bit)
+ jne device_not_available_emulate
+ preempt_stop(CLBR_ANY)
+ call math_state_restore
+ jmp ret_from_exception
+device_not_available_emulate:
+ pushl $0 # temporary storage for ORIG_EIP
+ CFI_ADJUST_CFA_OFFSET 4
+ call math_emulate
+ addl $4, %esp
+ CFI_ADJUST_CFA_OFFSET -4
+ jmp ret_from_exception
+ CFI_ENDPROC
+END(device_not_available)
+
+/*
+ * Debug traps and NMI can happen at the one SYSENTER instruction
+ * that sets up the real kernel stack. Check here, since we can't
+ * allow the wrong stack to be used.
+ *
+ * "TSS_sysenter_esp0+12" is because the NMI/debug handler will have
+ * already pushed 3 words if it hits on the sysenter instruction:
+ * eflags, cs and eip.
+ *
+ * We just load the right stack, and push the three (known) values
+ * by hand onto the new stack - while updating the return eip past
+ * the instruction that would have done it for sysenter.
+ */
+#define FIX_STACK(offset, ok, label) \
+ cmpw $__KERNEL_CS,4(%esp); \
+ jne ok; \
+label: \
+ movl TSS_sysenter_esp0+offset(%esp),%esp; \
+ CFI_DEF_CFA esp, 0; \
+ CFI_UNDEFINED eip; \
+ pushfl; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ pushl $__KERNEL_CS; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ pushl $sysenter_past_esp; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ CFI_REL_OFFSET eip, 0
+
+KPROBE_ENTRY(debug)
+ RING0_INT_FRAME
+ cmpl $sysenter_entry,(%esp)
+ jne debug_stack_correct
+ FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
+debug_stack_correct:
+ pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ xorl %edx,%edx # error code 0
+ movl %esp,%eax # pt_regs pointer
+ call do_debug
+ jmp ret_from_exception
+ CFI_ENDPROC
+KPROBE_END(debug)
+
+/*
+ * NMI is doubly nasty. It can happen _while_ we're handling
+ * a debug fault, and the debug fault hasn't yet been able to
+ * clear up the stack. So we first check whether we got an
+ * NMI on the sysenter entry path, but after that we need to
+ * check whether we got an NMI on the debug path where the debug
+ * fault happened on the sysenter path.
+ */
+KPROBE_ENTRY(nmi)
+ RING0_INT_FRAME
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ movl %ss, %eax
+ cmpw $__ESPFIX_SS, %ax
+ popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
+ je nmi_espfix_stack
+ cmpl $sysenter_entry,(%esp)
+ je nmi_stack_fixup
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ movl %esp,%eax
+ /* Do not access memory above the end of our stack page,
+ * it might not exist.
+ */
+ andl $(THREAD_SIZE-1),%eax
+ cmpl $(THREAD_SIZE-20),%eax
+ popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
+ jae nmi_stack_correct
+ cmpl $sysenter_entry,12(%esp)
+ je nmi_debug_stack_check
+nmi_stack_correct:
+ /* We have a RING0_INT_FRAME here */
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ xorl %edx,%edx # zero error code
+ movl %esp,%eax # pt_regs pointer
+ call do_nmi
+ jmp restore_nocheck_notrace
+ CFI_ENDPROC
+
+nmi_stack_fixup:
+ RING0_INT_FRAME
+ FIX_STACK(12,nmi_stack_correct, 1)
+ jmp nmi_stack_correct
+
+nmi_debug_stack_check:
+ /* We have a RING0_INT_FRAME here */
+ cmpw $__KERNEL_CS,16(%esp)
+ jne nmi_stack_correct
+ cmpl $debug,(%esp)
+ jb nmi_stack_correct
+ cmpl $debug_esp_fix_insn,(%esp)
+ ja nmi_stack_correct
+ FIX_STACK(24,nmi_stack_correct, 1)
+ jmp nmi_stack_correct
+
+nmi_espfix_stack:
+ /* We have a RING0_INT_FRAME here.
+ *
+ * create the pointer to lss back
+ */
+ pushl %ss
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl %esp
+ CFI_ADJUST_CFA_OFFSET 4
+ addw $4, (%esp)
+ /* copy the iret frame of 12 bytes */
+ .rept 3
+ pushl 16(%esp)
+ CFI_ADJUST_CFA_OFFSET 4
+ .endr
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ FIXUP_ESPFIX_STACK # %eax == %esp
+ xorl %edx,%edx # zero error code
+ call do_nmi
+ RESTORE_REGS
+ lss 12+4(%esp), %esp # back to espfix stack
+ CFI_ADJUST_CFA_OFFSET -24
+1: INTERRUPT_RETURN
+ CFI_ENDPROC
+.section __ex_table,"a"
+ .align 4
+ .long 1b,iret_exc
+.previous
+KPROBE_END(nmi)
+
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_iret)
+1: iret
+.section __ex_table,"a"
+ .align 4
+ .long 1b,iret_exc
+.previous
+END(native_iret)
+
+ENTRY(native_irq_enable_sysexit)
+ sti
+ sysexit
+END(native_irq_enable_sysexit)
+#endif
+
+KPROBE_ENTRY(int3)
+ RING0_INT_FRAME
+ pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ xorl %edx,%edx # zero error code
+ movl %esp,%eax # pt_regs pointer
+ call do_int3
+ jmp ret_from_exception
+ CFI_ENDPROC
+KPROBE_END(int3)
+
+ENTRY(overflow)
+ RING0_INT_FRAME
+ pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_overflow
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(overflow)
+
+ENTRY(bounds)
+ RING0_INT_FRAME
+ pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_bounds
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(bounds)
+
+ENTRY(invalid_op)
+ RING0_INT_FRAME
+ pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_invalid_op
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(invalid_op)
+
+ENTRY(coprocessor_segment_overrun)
+ RING0_INT_FRAME
+ pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_coprocessor_segment_overrun
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(coprocessor_segment_overrun)
+
+ENTRY(invalid_TSS)
+ RING0_EC_FRAME
+ pushl $do_invalid_TSS
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(invalid_TSS)
+
+ENTRY(segment_not_present)
+ RING0_EC_FRAME
+ pushl $do_segment_not_present
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(segment_not_present)
+
+ENTRY(stack_segment)
+ RING0_EC_FRAME
+ pushl $do_stack_segment
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(stack_segment)
+
+KPROBE_ENTRY(general_protection)
+ RING0_EC_FRAME
+ pushl $do_general_protection
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+KPROBE_END(general_protection)
+
+ENTRY(alignment_check)
+ RING0_EC_FRAME
+ pushl $do_alignment_check
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(alignment_check)
+
+ENTRY(divide_error)
+ RING0_INT_FRAME
+ pushl $0 # no error code
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_divide_error
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(divide_error)
+
+#ifdef CONFIG_X86_MCE
+ENTRY(machine_check)
+ RING0_INT_FRAME
+ pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl machine_check_vector
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(machine_check)
+#endif
+
+ENTRY(spurious_interrupt_bug)
+ RING0_INT_FRAME
+ pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_spurious_interrupt_bug
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(spurious_interrupt_bug)
+
+ENTRY(kernel_thread_helper)
+ pushl $0 # fake return address for unwinder
+ CFI_STARTPROC
+ movl %edx,%eax
+ push %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ call *%ebx
+ push %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ call do_exit
+ CFI_ENDPROC
+ENDPROC(kernel_thread_helper)
+
+#ifdef CONFIG_XEN
+ENTRY(xen_hypervisor_callback)
+ CFI_STARTPROC
+ pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ TRACE_IRQS_OFF
+
+ /* Check to see if we got the event in the critical
+ region in xen_iret_direct, after we've reenabled
+ events and checked for pending events. This simulates
+ iret instruction's behaviour where it delivers a
+ pending interrupt when enabling interrupts. */
+ movl PT_EIP(%esp),%eax
+ cmpl $xen_iret_start_crit,%eax
+ jb 1f
+ cmpl $xen_iret_end_crit,%eax
+ jae 1f
+
+ call xen_iret_crit_fixup
+
+1: mov %esp, %eax
+ call xen_evtchn_do_upcall
+ jmp ret_from_intr
+ CFI_ENDPROC
+ENDPROC(xen_hypervisor_callback)
+
+# Hypervisor uses this for application faults while it executes.
+# We get here for two reasons:
+# 1. Fault while reloading DS, ES, FS or GS
+# 2. Fault while executing IRET
+# Category 1 we fix up by reattempting the load, and zeroing the segment
+# register if the load fails.
+# Category 2 we fix up by jumping to do_iret_error. We cannot use the
+# normal Linux return path in this case because if we use the IRET hypercall
+# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+# We distinguish between categories by maintaining a status value in EAX.
+ENTRY(xen_failsafe_callback)
+ CFI_STARTPROC
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ movl $1,%eax
+1: mov 4(%esp),%ds
+2: mov 8(%esp),%es
+3: mov 12(%esp),%fs
+4: mov 16(%esp),%gs
+ testl %eax,%eax
+ popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
+ lea 16(%esp),%esp
+ CFI_ADJUST_CFA_OFFSET -16
+ jz 5f
+ addl $16,%esp
+ jmp iret_exc # EAX != 0 => Category 2 (Bad IRET)
+5: pushl $0 # EAX == 0 => Category 1 (Bad segment)
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ jmp ret_from_exception
+ CFI_ENDPROC
+
+.section .fixup,"ax"
+6: xorl %eax,%eax
+ movl %eax,4(%esp)
+ jmp 1b
+7: xorl %eax,%eax
+ movl %eax,8(%esp)
+ jmp 2b
+8: xorl %eax,%eax
+ movl %eax,12(%esp)
+ jmp 3b
+9: xorl %eax,%eax
+ movl %eax,16(%esp)
+ jmp 4b
+.previous
+.section __ex_table,"a"
+ .align 4
+ .long 1b,6b
+ .long 2b,7b
+ .long 3b,8b
+ .long 4b,9b
+.previous
+ENDPROC(xen_failsafe_callback)
+
+#endif /* CONFIG_XEN */
+
+.section .rodata,"a"
+#include "syscall_table_32.S"
+
+syscall_table_size=(.-sys_call_table)
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86/kernel/entry_64.S
index 1d232e5f565..1d232e5f565 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86/kernel/entry_64.S
diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86/kernel/genapic_64.c
index 47496a40e84..47496a40e84 100644
--- a/arch/x86_64/kernel/genapic.c
+++ b/arch/x86/kernel/genapic_64.c
diff --git a/arch/x86_64/kernel/genapic_flat.c b/arch/x86/kernel/genapic_flat_64.c
index ecb01eefdd2..ecb01eefdd2 100644
--- a/arch/x86_64/kernel/genapic_flat.c
+++ b/arch/x86/kernel/genapic_flat_64.c
diff --git a/arch/i386/kernel/geode.c b/arch/x86/kernel/geode_32.c
index 41e8aec4c61..41e8aec4c61 100644
--- a/arch/i386/kernel/geode.c
+++ b/arch/x86/kernel/geode_32.c
diff --git a/arch/x86_64/kernel/head64.c b/arch/x86/kernel/head64.c
index 6c34bdd22e2..6c34bdd22e2 100644
--- a/arch/x86_64/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
new file mode 100644
index 00000000000..9150ca9b5f8
--- /dev/null
+++ b/arch/x86/kernel/head_32.S
@@ -0,0 +1,578 @@
+/*
+ * linux/arch/i386/kernel/head.S -- the 32-bit startup code.
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * Enhanced CPU detection and feature setting code by Mike Jagdis
+ * and Martin Mares, November 1997.
+ */
+
+.text
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/desc.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+#include <asm/setup.h>
+
+/*
+ * References to members of the new_cpu_data structure.
+ */
+
+#define X86 new_cpu_data+CPUINFO_x86
+#define X86_VENDOR new_cpu_data+CPUINFO_x86_vendor
+#define X86_MODEL new_cpu_data+CPUINFO_x86_model
+#define X86_MASK new_cpu_data+CPUINFO_x86_mask
+#define X86_HARD_MATH new_cpu_data+CPUINFO_hard_math
+#define X86_CPUID new_cpu_data+CPUINFO_cpuid_level
+#define X86_CAPABILITY new_cpu_data+CPUINFO_x86_capability
+#define X86_VENDOR_ID new_cpu_data+CPUINFO_x86_vendor_id
+
+/*
+ * This is how much memory *in addition to the memory covered up to
+ * and including _end* we need mapped initially.
+ * We need:
+ * - one bit for each possible page, but only in low memory, which means
+ * 2^32/4096/8 = 128K worst case (4G/4G split.)
+ * - enough space to map all low memory, which means
+ * (2^32/4096) / 1024 pages (worst case, non PAE)
+ * (2^32/4096) / 512 + 4 pages (worst case for PAE)
+ * - a few pages for allocator use before the kernel pagetable has
+ * been set up
+ *
+ * Modulo rounding, each megabyte assigned here requires a kilobyte of
+ * memory, which is currently unreclaimed.
+ *
+ * This should be a multiple of a page.
+ */
+LOW_PAGES = 1<<(32-PAGE_SHIFT_asm)
+
+#if PTRS_PER_PMD > 1
+PAGE_TABLE_SIZE = (LOW_PAGES / PTRS_PER_PMD) + PTRS_PER_PGD
+#else
+PAGE_TABLE_SIZE = (LOW_PAGES / PTRS_PER_PGD)
+#endif
+BOOTBITMAP_SIZE = LOW_PAGES / 8
+ALLOCATOR_SLOP = 4
+
+INIT_MAP_BEYOND_END = BOOTBITMAP_SIZE + (PAGE_TABLE_SIZE + ALLOCATOR_SLOP)*PAGE_SIZE_asm
+
+/*
+ * 32-bit kernel entrypoint; only used by the boot CPU. On entry,
+ * %esi points to the real-mode code as a 32-bit pointer.
+ * CS and DS must be 4 GB flat segments, but we don't depend on
+ * any particular GDT layout, because we load our own as soon as we
+ * can.
+ */
+.section .text.head,"ax",@progbits
+ENTRY(startup_32)
+
+/*
+ * Set segments to known values.
+ */
+ cld
+ lgdt boot_gdt_descr - __PAGE_OFFSET
+ movl $(__BOOT_DS),%eax
+ movl %eax,%ds
+ movl %eax,%es
+ movl %eax,%fs
+ movl %eax,%gs
+
+/*
+ * Clear BSS first so that there are no surprises...
+ * No need to cld as DF is already clear from cld above...
+ */
+ xorl %eax,%eax
+ movl $__bss_start - __PAGE_OFFSET,%edi
+ movl $__bss_stop - __PAGE_OFFSET,%ecx
+ subl %edi,%ecx
+ shrl $2,%ecx
+ rep ; stosl
+/*
+ * Copy bootup parameters out of the way.
+ * Note: %esi still has the pointer to the real-mode data.
+ * With the kexec as boot loader, parameter segment might be loaded beyond
+ * kernel image and might not even be addressable by early boot page tables.
+ * (kexec on panic case). Hence copy out the parameters before initializing
+ * page tables.
+ */
+ movl $(boot_params - __PAGE_OFFSET),%edi
+ movl $(PARAM_SIZE/4),%ecx
+ cld
+ rep
+ movsl
+ movl boot_params - __PAGE_OFFSET + NEW_CL_POINTER,%esi
+ andl %esi,%esi
+ jnz 2f # New command line protocol
+ cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR
+ jne 1f
+ movzwl OLD_CL_OFFSET,%esi
+ addl $(OLD_CL_BASE_ADDR),%esi
+2:
+ movl $(boot_command_line - __PAGE_OFFSET),%edi
+ movl $(COMMAND_LINE_SIZE/4),%ecx
+ rep
+ movsl
+1:
+
+/*
+ * Initialize page tables. This creates a PDE and a set of page
+ * tables, which are located immediately beyond _end. The variable
+ * init_pg_tables_end is set up to point to the first "safe" location.
+ * Mappings are created both at virtual address 0 (identity mapping)
+ * and PAGE_OFFSET for up to _end+sizeof(page tables)+INIT_MAP_BEYOND_END.
+ *
+ * Warning: don't use %esi or the stack in this code. However, %esp
+ * can be used as a GPR if you really need it...
+ */
+page_pde_offset = (__PAGE_OFFSET >> 20);
+
+ movl $(pg0 - __PAGE_OFFSET), %edi
+ movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
+ movl $0x007, %eax /* 0x007 = PRESENT+RW+USER */
+10:
+ leal 0x007(%edi),%ecx /* Create PDE entry */
+ movl %ecx,(%edx) /* Store identity PDE entry */
+ movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */
+ addl $4,%edx
+ movl $1024, %ecx
+11:
+ stosl
+ addl $0x1000,%eax
+ loop 11b
+ /* End condition: we must map up to and including INIT_MAP_BEYOND_END */
+ /* bytes beyond the end of our own page tables; the +0x007 is the attribute bits */
+ leal (INIT_MAP_BEYOND_END+0x007)(%edi),%ebp
+ cmpl %ebp,%eax
+ jb 10b
+ movl %edi,(init_pg_tables_end - __PAGE_OFFSET)
+
+ xorl %ebx,%ebx /* This is the boot CPU (BSP) */
+ jmp 3f
+/*
+ * Non-boot CPU entry point; entered from trampoline.S
+ * We can't lgdt here, because lgdt itself uses a data segment, but
+ * we know the trampoline has already loaded the boot_gdt for us.
+ *
+ * If cpu hotplug is not supported then this code can go in init section
+ * which will be freed later
+ */
+
+#ifndef CONFIG_HOTPLUG_CPU
+.section .init.text,"ax",@progbits
+#endif
+
+ /* Do an early initialization of the fixmap area */
+ movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
+ movl $(swapper_pg_pmd - __PAGE_OFFSET), %eax
+ addl $0x007, %eax /* 0x007 = PRESENT+RW+USER */
+ movl %eax, 4092(%edx)
+
+#ifdef CONFIG_SMP
+ENTRY(startup_32_smp)
+ cld
+ movl $(__BOOT_DS),%eax
+ movl %eax,%ds
+ movl %eax,%es
+ movl %eax,%fs
+ movl %eax,%gs
+
+/*
+ * New page tables may be in 4Mbyte page mode and may
+ * be using the global pages.
+ *
+ * NOTE! If we are on a 486 we may have no cr4 at all!
+ * So we do not try to touch it unless we really have
+ * some bits in it to set. This won't work if the BSP
+ * implements cr4 but this AP does not -- very unlikely
+ * but be warned! The same applies to the pse feature
+ * if not equally supported. --macro
+ *
+ * NOTE! We have to correct for the fact that we're
+ * not yet offset PAGE_OFFSET..
+ */
+#define cr4_bits mmu_cr4_features-__PAGE_OFFSET
+ movl cr4_bits,%edx
+ andl %edx,%edx
+ jz 6f
+ movl %cr4,%eax # Turn on paging options (PSE,PAE,..)
+ orl %edx,%eax
+ movl %eax,%cr4
+
+ btl $5, %eax # check if PAE is enabled
+ jnc 6f
+
+ /* Check if extended functions are implemented */
+ movl $0x80000000, %eax
+ cpuid
+ cmpl $0x80000000, %eax
+ jbe 6f
+ mov $0x80000001, %eax
+ cpuid
+ /* Execute Disable bit supported? */
+ btl $20, %edx
+ jnc 6f
+
+ /* Setup EFER (Extended Feature Enable Register) */
+ movl $0xc0000080, %ecx
+ rdmsr
+
+ btsl $11, %eax
+ /* Make changes effective */
+ wrmsr
+
+6:
+ /* This is a secondary processor (AP) */
+ xorl %ebx,%ebx
+ incl %ebx
+
+#endif /* CONFIG_SMP */
+3:
+
+/*
+ * Enable paging
+ */
+ movl $swapper_pg_dir-__PAGE_OFFSET,%eax
+ movl %eax,%cr3 /* set the page table pointer.. */
+ movl %cr0,%eax
+ orl $0x80000000,%eax
+ movl %eax,%cr0 /* ..and set paging (PG) bit */
+ ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */
+1:
+ /* Set up the stack pointer */
+ lss stack_start,%esp
+
+/*
+ * Initialize eflags. Some BIOS's leave bits like NT set. This would
+ * confuse the debugger if this code is traced.
+ * XXX - best to initialize before switching to protected mode.
+ */
+ pushl $0
+ popfl
+
+#ifdef CONFIG_SMP
+ andl %ebx,%ebx
+ jz 1f /* Initial CPU cleans BSS */
+ jmp checkCPUtype
+1:
+#endif /* CONFIG_SMP */
+
+/*
+ * start system 32-bit setup. We need to re-do some of the things done
+ * in 16-bit mode for the "real" operations.
+ */
+ call setup_idt
+
+checkCPUtype:
+
+ movl $-1,X86_CPUID # -1 for no CPUID initially
+
+/* check if it is 486 or 386. */
+/*
+ * XXX - this does a lot of unnecessary setup. Alignment checks don't
+ * apply at our cpl of 0 and the stack ought to be aligned already, and
+ * we don't need to preserve eflags.
+ */
+
+ movb $3,X86 # at least 386
+ pushfl # push EFLAGS
+ popl %eax # get EFLAGS
+ movl %eax,%ecx # save original EFLAGS
+ xorl $0x240000,%eax # flip AC and ID bits in EFLAGS
+ pushl %eax # copy to EFLAGS
+ popfl # set EFLAGS
+ pushfl # get new EFLAGS
+ popl %eax # put it in eax
+ xorl %ecx,%eax # change in flags
+ pushl %ecx # restore original EFLAGS
+ popfl
+ testl $0x40000,%eax # check if AC bit changed
+ je is386
+
+ movb $4,X86 # at least 486
+ testl $0x200000,%eax # check if ID bit changed
+ je is486
+
+ /* get vendor info */
+ xorl %eax,%eax # call CPUID with 0 -> return vendor ID
+ cpuid
+ movl %eax,X86_CPUID # save CPUID level
+ movl %ebx,X86_VENDOR_ID # lo 4 chars
+ movl %edx,X86_VENDOR_ID+4 # next 4 chars
+ movl %ecx,X86_VENDOR_ID+8 # last 4 chars
+
+ orl %eax,%eax # do we have processor info as well?
+ je is486
+
+ movl $1,%eax # Use the CPUID instruction to get CPU type
+ cpuid
+ movb %al,%cl # save reg for future use
+ andb $0x0f,%ah # mask processor family
+ movb %ah,X86
+ andb $0xf0,%al # mask model
+ shrb $4,%al
+ movb %al,X86_MODEL
+ andb $0x0f,%cl # mask mask revision
+ movb %cl,X86_MASK
+ movl %edx,X86_CAPABILITY
+
+is486: movl $0x50022,%ecx # set AM, WP, NE and MP
+ jmp 2f
+
+is386: movl $2,%ecx # set MP
+2: movl %cr0,%eax
+ andl $0x80000011,%eax # Save PG,PE,ET
+ orl %ecx,%eax
+ movl %eax,%cr0
+
+ call check_x87
+ lgdt early_gdt_descr
+ lidt idt_descr
+ ljmp $(__KERNEL_CS),$1f
+1: movl $(__KERNEL_DS),%eax # reload all the segment registers
+ movl %eax,%ss # after changing gdt.
+ movl %eax,%fs # gets reset once there's real percpu
+
+ movl $(__USER_DS),%eax # DS/ES contains default USER segment
+ movl %eax,%ds
+ movl %eax,%es
+
+ xorl %eax,%eax # Clear GS and LDT
+ movl %eax,%gs
+ lldt %ax
+
+ cld # gcc2 wants the direction flag cleared at all times
+ pushl $0 # fake return address for unwinder
+#ifdef CONFIG_SMP
+ movb ready, %cl
+ movb $1, ready
+ cmpb $0,%cl # the first CPU calls start_kernel
+ je 1f
+ movl $(__KERNEL_PERCPU), %eax
+ movl %eax,%fs # set this cpu's percpu
+ jmp initialize_secondary # all other CPUs call initialize_secondary
+1:
+#endif /* CONFIG_SMP */
+ jmp start_kernel
+
+/*
+ * We depend on ET to be correct. This checks for 287/387.
+ */
+check_x87:
+ movb $0,X86_HARD_MATH
+ clts
+ fninit
+ fstsw %ax
+ cmpb $0,%al
+ je 1f
+ movl %cr0,%eax /* no coprocessor: have to set bits */
+ xorl $4,%eax /* set EM */
+ movl %eax,%cr0
+ ret
+ ALIGN
+1: movb $1,X86_HARD_MATH
+ .byte 0xDB,0xE4 /* fsetpm for 287, ignored by 387 */
+ ret
+
+/*
+ * setup_idt
+ *
+ * sets up a idt with 256 entries pointing to
+ * ignore_int, interrupt gates. It doesn't actually load
+ * idt - that can be done only after paging has been enabled
+ * and the kernel moved to PAGE_OFFSET. Interrupts
+ * are enabled elsewhere, when we can be relatively
+ * sure everything is ok.
+ *
+ * Warning: %esi is live across this function.
+ */
+setup_idt:
+ lea ignore_int,%edx
+ movl $(__KERNEL_CS << 16),%eax
+ movw %dx,%ax /* selector = 0x0010 = cs */
+ movw $0x8E00,%dx /* interrupt gate - dpl=0, present */
+
+ lea idt_table,%edi
+ mov $256,%ecx
+rp_sidt:
+ movl %eax,(%edi)
+ movl %edx,4(%edi)
+ addl $8,%edi
+ dec %ecx
+ jne rp_sidt
+
+.macro set_early_handler handler,trapno
+ lea \handler,%edx
+ movl $(__KERNEL_CS << 16),%eax
+ movw %dx,%ax
+ movw $0x8E00,%dx /* interrupt gate - dpl=0, present */
+ lea idt_table,%edi
+ movl %eax,8*\trapno(%edi)
+ movl %edx,8*\trapno+4(%edi)
+.endm
+
+ set_early_handler handler=early_divide_err,trapno=0
+ set_early_handler handler=early_illegal_opcode,trapno=6
+ set_early_handler handler=early_protection_fault,trapno=13
+ set_early_handler handler=early_page_fault,trapno=14
+
+ ret
+
+early_divide_err:
+ xor %edx,%edx
+ pushl $0 /* fake errcode */
+ jmp early_fault
+
+early_illegal_opcode:
+ movl $6,%edx
+ pushl $0 /* fake errcode */
+ jmp early_fault
+
+early_protection_fault:
+ movl $13,%edx
+ jmp early_fault
+
+early_page_fault:
+ movl $14,%edx
+ jmp early_fault
+
+early_fault:
+ cld
+#ifdef CONFIG_PRINTK
+ movl $(__KERNEL_DS),%eax
+ movl %eax,%ds
+ movl %eax,%es
+ cmpl $2,early_recursion_flag
+ je hlt_loop
+ incl early_recursion_flag
+ movl %cr2,%eax
+ pushl %eax
+ pushl %edx /* trapno */
+ pushl $fault_msg
+#ifdef CONFIG_EARLY_PRINTK
+ call early_printk
+#else
+ call printk
+#endif
+#endif
+hlt_loop:
+ hlt
+ jmp hlt_loop
+
+/* This is the default interrupt "handler" :-) */
+ ALIGN
+ignore_int:
+ cld
+#ifdef CONFIG_PRINTK
+ pushl %eax
+ pushl %ecx
+ pushl %edx
+ pushl %es
+ pushl %ds
+ movl $(__KERNEL_DS),%eax
+ movl %eax,%ds
+ movl %eax,%es
+ cmpl $2,early_recursion_flag
+ je hlt_loop
+ incl early_recursion_flag
+ pushl 16(%esp)
+ pushl 24(%esp)
+ pushl 32(%esp)
+ pushl 40(%esp)
+ pushl $int_msg
+#ifdef CONFIG_EARLY_PRINTK
+ call early_printk
+#else
+ call printk
+#endif
+ addl $(5*4),%esp
+ popl %ds
+ popl %es
+ popl %edx
+ popl %ecx
+ popl %eax
+#endif
+ iret
+
+.section .text
+/*
+ * Real beginning of normal "text" segment
+ */
+ENTRY(stext)
+ENTRY(_stext)
+
+/*
+ * BSS section
+ */
+.section ".bss.page_aligned","wa"
+ .align PAGE_SIZE_asm
+ENTRY(swapper_pg_dir)
+ .fill 1024,4,0
+ENTRY(swapper_pg_pmd)
+ .fill 1024,4,0
+ENTRY(empty_zero_page)
+ .fill 4096,1,0
+
+/*
+ * This starts the data section.
+ */
+.data
+ENTRY(stack_start)
+ .long init_thread_union+THREAD_SIZE
+ .long __BOOT_DS
+
+ready: .byte 0
+
+early_recursion_flag:
+ .long 0
+
+int_msg:
+ .asciz "Unknown interrupt or fault at EIP %p %p %p\n"
+
+fault_msg:
+ .ascii "Int %d: CR2 %p err %p EIP %p CS %p flags %p\n"
+ .asciz "Stack: %p %p %p %p %p %p %p %p\n"
+
+#include "../../x86/xen/xen-head.S"
+
+/*
+ * The IDT and GDT 'descriptors' are a strange 48-bit object
+ * only used by the lidt and lgdt instructions. They are not
+ * like usual segment descriptors - they consist of a 16-bit
+ * segment size, and 32-bit linear address value:
+ */
+
+.globl boot_gdt_descr
+.globl idt_descr
+
+ ALIGN
+# early boot GDT descriptor (must use 1:1 address mapping)
+ .word 0 # 32 bit align gdt_desc.address
+boot_gdt_descr:
+ .word __BOOT_DS+7
+ .long boot_gdt - __PAGE_OFFSET
+
+ .word 0 # 32-bit align idt_desc.address
+idt_descr:
+ .word IDT_ENTRIES*8-1 # idt contains 256 entries
+ .long idt_table
+
+# boot GDT descriptor (later on used by CPU#0):
+ .word 0 # 32 bit align gdt_desc.address
+ENTRY(early_gdt_descr)
+ .word GDT_ENTRIES*8-1
+ .long per_cpu__gdt_page /* Overwritten for secondary CPUs */
+
+/*
+ * The boot_gdt must mirror the equivalent in setup.S and is
+ * used only for booting.
+ */
+ .align L1_CACHE_BYTES
+ENTRY(boot_gdt)
+ .fill GDT_ENTRY_BOOT_CS,8,0
+ .quad 0x00cf9a000000ffff /* kernel 4GB code at 0x00000000 */
+ .quad 0x00cf92000000ffff /* kernel 4GB data at 0x00000000 */
diff --git a/arch/x86_64/kernel/head.S b/arch/x86/kernel/head_64.S
index b6167fe3330..b6167fe3330 100644
--- a/arch/x86_64/kernel/head.S
+++ b/arch/x86/kernel/head_64.S
diff --git a/arch/i386/kernel/hpet.c b/arch/x86/kernel/hpet_32.c
index 533d4932bc7..533d4932bc7 100644
--- a/arch/i386/kernel/hpet.c
+++ b/arch/x86/kernel/hpet_32.c
diff --git a/arch/x86_64/kernel/hpet.c b/arch/x86/kernel/hpet_64.c
index e2d1b912e15..e2d1b912e15 100644
--- a/arch/x86_64/kernel/hpet.c
+++ b/arch/x86/kernel/hpet_64.c
diff --git a/arch/i386/kernel/i386_ksyms.c b/arch/x86/kernel/i386_ksyms_32.c
index e3d4b73bfdb..e3d4b73bfdb 100644
--- a/arch/i386/kernel/i386_ksyms.c
+++ b/arch/x86/kernel/i386_ksyms_32.c
diff --git a/arch/i386/kernel/i387.c b/arch/x86/kernel/i387_32.c
index 665847281ed..665847281ed 100644
--- a/arch/i386/kernel/i387.c
+++ b/arch/x86/kernel/i387_32.c
diff --git a/arch/x86_64/kernel/i387.c b/arch/x86/kernel/i387_64.c
index 1d58c13bc6b..1d58c13bc6b 100644
--- a/arch/x86_64/kernel/i387.c
+++ b/arch/x86/kernel/i387_64.c
diff --git a/arch/i386/kernel/i8237.c b/arch/x86/kernel/i8237.c
index 6f508e8d7c5..6f508e8d7c5 100644
--- a/arch/i386/kernel/i8237.c
+++ b/arch/x86/kernel/i8237.c
diff --git a/arch/i386/kernel/i8253.c b/arch/x86/kernel/i8253_32.c
index 6d839f2f1b1..6d839f2f1b1 100644
--- a/arch/i386/kernel/i8253.c
+++ b/arch/x86/kernel/i8253_32.c
diff --git a/arch/i386/kernel/i8259.c b/arch/x86/kernel/i8259_32.c
index 0499cbe9871..0499cbe9871 100644
--- a/arch/i386/kernel/i8259.c
+++ b/arch/x86/kernel/i8259_32.c
diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86/kernel/i8259_64.c
index 948cae64609..948cae64609 100644
--- a/arch/x86_64/kernel/i8259.c
+++ b/arch/x86/kernel/i8259_64.c
diff --git a/arch/i386/kernel/init_task.c b/arch/x86/kernel/init_task_32.c
index d26fc063a76..d26fc063a76 100644
--- a/arch/i386/kernel/init_task.c
+++ b/arch/x86/kernel/init_task_32.c
diff --git a/arch/x86_64/kernel/init_task.c b/arch/x86/kernel/init_task_64.c
index 4ff33d4f855..4ff33d4f855 100644
--- a/arch/x86_64/kernel/init_task.c
+++ b/arch/x86/kernel/init_task_64.c
diff --git a/arch/i386/kernel/io_apic.c b/arch/x86/kernel/io_apic_32.c
index e2f4a1c6854..e2f4a1c6854 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic_32.c
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86/kernel/io_apic_64.c
index 966fa106249..966fa106249 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic_64.c
diff --git a/arch/i386/kernel/ioport.c b/arch/x86/kernel/ioport_32.c
index 3d310a946d7..3d310a946d7 100644
--- a/arch/i386/kernel/ioport.c
+++ b/arch/x86/kernel/ioport_32.c
diff --git a/arch/x86_64/kernel/ioport.c b/arch/x86/kernel/ioport_64.c
index 653efa30b0f..653efa30b0f 100644
--- a/arch/x86_64/kernel/ioport.c
+++ b/arch/x86/kernel/ioport_64.c
diff --git a/arch/i386/kernel/irq.c b/arch/x86/kernel/irq_32.c
index dd2b97fc00b..dd2b97fc00b 100644
--- a/arch/i386/kernel/irq.c
+++ b/arch/x86/kernel/irq_32.c
diff --git a/arch/x86_64/kernel/irq.c b/arch/x86/kernel/irq_64.c
index 39cb3fa83eb..39cb3fa83eb 100644
--- a/arch/x86_64/kernel/irq.c
+++ b/arch/x86/kernel/irq_64.c
diff --git a/arch/x86_64/kernel/k8.c b/arch/x86/kernel/k8.c
index 7377ccb2133..7377ccb2133 100644
--- a/arch/x86_64/kernel/k8.c
+++ b/arch/x86/kernel/k8.c
diff --git a/arch/i386/kernel/kprobes.c b/arch/x86/kernel/kprobes_32.c
index 448a50b1324..448a50b1324 100644
--- a/arch/i386/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes_32.c
diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86/kernel/kprobes_64.c
index a30e004682e..a30e004682e 100644
--- a/arch/x86_64/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes_64.c
diff --git a/arch/i386/kernel/ldt.c b/arch/x86/kernel/ldt_32.c
index e0b2d17f4f1..e0b2d17f4f1 100644
--- a/arch/i386/kernel/ldt.c
+++ b/arch/x86/kernel/ldt_32.c
diff --git a/arch/x86_64/kernel/ldt.c b/arch/x86/kernel/ldt_64.c
index bc9ffd5c19c..bc9ffd5c19c 100644
--- a/arch/x86_64/kernel/ldt.c
+++ b/arch/x86/kernel/ldt_64.c
diff --git a/arch/i386/kernel/machine_kexec.c b/arch/x86/kernel/machine_kexec_32.c
index 91966bafb3d..91966bafb3d 100644
--- a/arch/i386/kernel/machine_kexec.c
+++ b/arch/x86/kernel/machine_kexec_32.c
diff --git a/arch/x86_64/kernel/machine_kexec.c b/arch/x86/kernel/machine_kexec_64.c
index c3a55470367..c3a55470367 100644
--- a/arch/x86_64/kernel/machine_kexec.c
+++ b/arch/x86/kernel/machine_kexec_64.c
diff --git a/arch/i386/kernel/mca.c b/arch/x86/kernel/mca_32.c
index b83672b8952..b83672b8952 100644
--- a/arch/i386/kernel/mca.c
+++ b/arch/x86/kernel/mca_32.c
diff --git a/arch/x86_64/kernel/mce.c b/arch/x86/kernel/mce_64.c
index a66d607f5b9..a66d607f5b9 100644
--- a/arch/x86_64/kernel/mce.c
+++ b/arch/x86/kernel/mce_64.c
diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86/kernel/mce_amd_64.c
index 2f8a7f18b0f..2f8a7f18b0f 100644
--- a/arch/x86_64/kernel/mce_amd.c
+++ b/arch/x86/kernel/mce_amd_64.c
diff --git a/arch/x86_64/kernel/mce_intel.c b/arch/x86/kernel/mce_intel_64.c
index 6551505d8a2..6551505d8a2 100644
--- a/arch/x86_64/kernel/mce_intel.c
+++ b/arch/x86/kernel/mce_intel_64.c
diff --git a/arch/i386/kernel/microcode.c b/arch/x86/kernel/microcode.c
index 09cf7811035..09cf7811035 100644
--- a/arch/i386/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
diff --git a/arch/i386/kernel/module.c b/arch/x86/kernel/module_32.c
index 3db0a5442eb..3db0a5442eb 100644
--- a/arch/i386/kernel/module.c
+++ b/arch/x86/kernel/module_32.c
diff --git a/arch/x86_64/kernel/module.c b/arch/x86/kernel/module_64.c
index a888e67f587..a888e67f587 100644
--- a/arch/x86_64/kernel/module.c
+++ b/arch/x86/kernel/module_64.c
diff --git a/arch/i386/kernel/mpparse.c b/arch/x86/kernel/mpparse_32.c
index 13abb4ebfb7..13abb4ebfb7 100644
--- a/arch/i386/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse_32.c
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86/kernel/mpparse_64.c
index 8bf0ca03ac8..8bf0ca03ac8 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse_64.c
diff --git a/arch/i386/kernel/msr.c b/arch/x86/kernel/msr.c
index 0c1069b8d63..0c1069b8d63 100644
--- a/arch/i386/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
diff --git a/arch/i386/kernel/nmi.c b/arch/x86/kernel/nmi_32.c
index c7227e2180f..c7227e2180f 100644
--- a/arch/i386/kernel/nmi.c
+++ b/arch/x86/kernel/nmi_32.c
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86/kernel/nmi_64.c
index 0ec6d2ddb93..0ec6d2ddb93 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86/kernel/nmi_64.c
diff --git a/arch/i386/kernel/numaq.c b/arch/x86/kernel/numaq_32.c
index 9000d82c6dc..9000d82c6dc 100644
--- a/arch/i386/kernel/numaq.c
+++ b/arch/x86/kernel/numaq_32.c
diff --git a/arch/i386/kernel/paravirt.c b/arch/x86/kernel/paravirt_32.c
index 739cfb207dd..739cfb207dd 100644
--- a/arch/i386/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt_32.c
diff --git a/arch/x86_64/kernel/pci-calgary.c b/arch/x86/kernel/pci-calgary_64.c
index 71da01e73f0..71da01e73f0 100644
--- a/arch/x86_64/kernel/pci-calgary.c
+++ b/arch/x86/kernel/pci-calgary_64.c
diff --git a/arch/i386/kernel/pci-dma.c b/arch/x86/kernel/pci-dma_32.c
index 048f09b6255..048f09b6255 100644
--- a/arch/i386/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma_32.c
diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86/kernel/pci-dma_64.c
index 29711445c81..29711445c81 100644
--- a/arch/x86_64/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma_64.c
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86/kernel/pci-gart_64.c
index 4918c575d58..4918c575d58 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86/kernel/pci-gart_64.c
diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu_64.c
index 2a34c6c025a..2a34c6c025a 100644
--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu_64.c
diff --git a/arch/x86_64/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb_64.c
index b2f405ea7c8..b2f405ea7c8 100644
--- a/arch/x86_64/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb_64.c
diff --git a/arch/i386/kernel/pcspeaker.c b/arch/x86/kernel/pcspeaker.c
index bc1f2d3ea27..bc1f2d3ea27 100644
--- a/arch/i386/kernel/pcspeaker.c
+++ b/arch/x86/kernel/pcspeaker.c
diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86/kernel/pmtimer_64.c
index ae8f91214f1..ae8f91214f1 100644
--- a/arch/x86_64/kernel/pmtimer.c
+++ b/arch/x86/kernel/pmtimer_64.c
diff --git a/arch/i386/kernel/process.c b/arch/x86/kernel/process_32.c
index 84664710b78..84664710b78 100644
--- a/arch/i386/kernel/process.c
+++ b/arch/x86/kernel/process_32.c
diff --git a/arch/x86_64/kernel/process.c b/arch/x86/kernel/process_64.c
index 98956555450..98956555450 100644
--- a/arch/x86_64/kernel/process.c
+++ b/arch/x86/kernel/process_64.c
diff --git a/arch/i386/kernel/ptrace.c b/arch/x86/kernel/ptrace_32.c
index 7c1b92522e9..7c1b92522e9 100644
--- a/arch/i386/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace_32.c
diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86/kernel/ptrace_64.c
index eea3702427b..eea3702427b 100644
--- a/arch/x86_64/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace_64.c
diff --git a/arch/i386/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 6722469c263..6722469c263 100644
--- a/arch/i386/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
diff --git a/arch/i386/kernel/reboot.c b/arch/x86/kernel/reboot_32.c
index 0d796248866..0d796248866 100644
--- a/arch/i386/kernel/reboot.c
+++ b/arch/x86/kernel/reboot_32.c
diff --git a/arch/x86_64/kernel/reboot.c b/arch/x86/kernel/reboot_64.c
index 368db2b9c5a..368db2b9c5a 100644
--- a/arch/x86_64/kernel/reboot.c
+++ b/arch/x86/kernel/reboot_64.c
diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/x86/kernel/reboot_fixups_32.c
index 03e1cce58f4..03e1cce58f4 100644
--- a/arch/i386/kernel/reboot_fixups.c
+++ b/arch/x86/kernel/reboot_fixups_32.c
diff --git a/arch/i386/kernel/relocate_kernel.S b/arch/x86/kernel/relocate_kernel_32.S
index f151d6fae46..f151d6fae46 100644
--- a/arch/i386/kernel/relocate_kernel.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
diff --git a/arch/x86_64/kernel/relocate_kernel.S b/arch/x86/kernel/relocate_kernel_64.S
index 14e95872c6a..14e95872c6a 100644
--- a/arch/x86_64/kernel/relocate_kernel.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
diff --git a/arch/i386/kernel/scx200.c b/arch/x86/kernel/scx200_32.c
index c7d3df23f58..c7d3df23f58 100644
--- a/arch/i386/kernel/scx200.c
+++ b/arch/x86/kernel/scx200_32.c
diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86/kernel/setup64.c
index 1200aaac403..1200aaac403 100644
--- a/arch/x86_64/kernel/setup64.c
+++ b/arch/x86/kernel/setup64.c
diff --git a/arch/i386/kernel/setup.c b/arch/x86/kernel/setup_32.c
index d474cd639bc..d474cd639bc 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/x86/kernel/setup_32.c
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86/kernel/setup_64.c
index af838f6b0b7..af838f6b0b7 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86/kernel/setup_64.c
diff --git a/arch/i386/kernel/sigframe.h b/arch/x86/kernel/sigframe_32.h
index 0b2221711da..0b2221711da 100644
--- a/arch/i386/kernel/sigframe.h
+++ b/arch/x86/kernel/sigframe_32.h
diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c
new file mode 100644
index 00000000000..c03570f7fe8
--- /dev/null
+++ b/arch/x86/kernel/signal_32.c
@@ -0,0 +1,667 @@
+/*
+ * linux/arch/i386/kernel/signal.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
+ * 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/binfmts.h>
+#include <asm/processor.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/i387.h>
+#include "sigframe_32.h"
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage int
+sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+{
+ mask &= _BLOCKABLE;
+ spin_lock_irq(&current->sighand->siglock);
+ current->saved_sigmask = current->blocked;
+ siginitset(&current->blocked, mask);
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
+}
+
+asmlinkage int
+sys_sigaction(int sig, const struct old_sigaction __user *act,
+ struct old_sigaction __user *oact)
+{
+ struct k_sigaction new_ka, old_ka;
+ int ret;
+
+ if (act) {
+ old_sigset_t mask;
+ if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+ __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+ return -EFAULT;
+ __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+ __get_user(mask, &act->sa_mask);
+ siginitset(&new_ka.sa.sa_mask, mask);
+ }
+
+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+ if (!ret && oact) {
+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+ return -EFAULT;
+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+ }
+
+ return ret;
+}
+
+asmlinkage int
+sys_sigaltstack(unsigned long ebx)
+{
+ /* This is needed to make gcc realize it doesn't own the "struct pt_regs" */
+ struct pt_regs *regs = (struct pt_regs *)&ebx;
+ const stack_t __user *uss = (const stack_t __user *)ebx;
+ stack_t __user *uoss = (stack_t __user *)regs->ecx;
+
+ return do_sigaltstack(uss, uoss, regs->esp);
+}
+
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax)
+{
+ unsigned int err = 0;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+#define COPY(x) err |= __get_user(regs->x, &sc->x)
+
+#define COPY_SEG(seg) \
+ { unsigned short tmp; \
+ err |= __get_user(tmp, &sc->seg); \
+ regs->x##seg = tmp; }
+
+#define COPY_SEG_STRICT(seg) \
+ { unsigned short tmp; \
+ err |= __get_user(tmp, &sc->seg); \
+ regs->x##seg = tmp|3; }
+
+#define GET_SEG(seg) \
+ { unsigned short tmp; \
+ err |= __get_user(tmp, &sc->seg); \
+ loadsegment(seg,tmp); }
+
+#define FIX_EFLAGS (X86_EFLAGS_AC | X86_EFLAGS_RF | \
+ X86_EFLAGS_OF | X86_EFLAGS_DF | \
+ X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \
+ X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF)
+
+ GET_SEG(gs);
+ COPY_SEG(fs);
+ COPY_SEG(es);
+ COPY_SEG(ds);
+ COPY(edi);
+ COPY(esi);
+ COPY(ebp);
+ COPY(esp);
+ COPY(ebx);
+ COPY(edx);
+ COPY(ecx);
+ COPY(eip);
+ COPY_SEG_STRICT(cs);
+ COPY_SEG_STRICT(ss);
+
+ {
+ unsigned int tmpflags;
+ err |= __get_user(tmpflags, &sc->eflags);
+ regs->eflags = (regs->eflags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+ regs->orig_eax = -1; /* disable syscall checks */
+ }
+
+ {
+ struct _fpstate __user * buf;
+ err |= __get_user(buf, &sc->fpstate);
+ if (buf) {
+ if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
+ goto badframe;
+ err |= restore_i387(buf);
+ } else {
+ struct task_struct *me = current;
+ if (used_math()) {
+ clear_fpu(me);
+ clear_used_math();
+ }
+ }
+ }
+
+ err |= __get_user(*peax, &sc->eax);
+ return err;
+
+badframe:
+ return 1;
+}
+
+asmlinkage int sys_sigreturn(unsigned long __unused)
+{
+ struct pt_regs *regs = (struct pt_regs *) &__unused;
+ struct sigframe __user *frame = (struct sigframe __user *)(regs->esp - 8);
+ sigset_t set;
+ int eax;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__get_user(set.sig[0], &frame->sc.oldmask)
+ || (_NSIG_WORDS > 1
+ && __copy_from_user(&set.sig[1], &frame->extramask,
+ sizeof(frame->extramask))))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->sc, &eax))
+ goto badframe;
+ return eax;
+
+badframe:
+ if (show_unhandled_signals && printk_ratelimit())
+ printk("%s%s[%d] bad frame in sigreturn frame:%p eip:%lx"
+ " esp:%lx oeax:%lx\n",
+ current->pid > 1 ? KERN_INFO : KERN_EMERG,
+ current->comm, current->pid, frame, regs->eip,
+ regs->esp, regs->orig_eax);
+
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+asmlinkage int sys_rt_sigreturn(unsigned long __unused)
+{
+ struct pt_regs *regs = (struct pt_regs *) &__unused;
+ struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(regs->esp - 4);
+ sigset_t set;
+ int eax;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &eax))
+ goto badframe;
+
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->esp) == -EFAULT)
+ goto badframe;
+
+ return eax;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
+ struct pt_regs *regs, unsigned long mask)
+{
+ int tmp, err = 0;
+
+ err |= __put_user(regs->xfs, (unsigned int __user *)&sc->fs);
+ savesegment(gs, tmp);
+ err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
+
+ err |= __put_user(regs->xes, (unsigned int __user *)&sc->es);
+ err |= __put_user(regs->xds, (unsigned int __user *)&sc->ds);
+ err |= __put_user(regs->edi, &sc->edi);
+ err |= __put_user(regs->esi, &sc->esi);
+ err |= __put_user(regs->ebp, &sc->ebp);
+ err |= __put_user(regs->esp, &sc->esp);
+ err |= __put_user(regs->ebx, &sc->ebx);
+ err |= __put_user(regs->edx, &sc->edx);
+ err |= __put_user(regs->ecx, &sc->ecx);
+ err |= __put_user(regs->eax, &sc->eax);
+ err |= __put_user(current->thread.trap_no, &sc->trapno);
+ err |= __put_user(current->thread.error_code, &sc->err);
+ err |= __put_user(regs->eip, &sc->eip);
+ err |= __put_user(regs->xcs, (unsigned int __user *)&sc->cs);
+ err |= __put_user(regs->eflags, &sc->eflags);
+ err |= __put_user(regs->esp, &sc->esp_at_signal);
+ err |= __put_user(regs->xss, (unsigned int __user *)&sc->ss);
+
+ tmp = save_i387(fpstate);
+ if (tmp < 0)
+ err = 1;
+ else
+ err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
+
+ /* non-iBCS2 extensions.. */
+ err |= __put_user(mask, &sc->oldmask);
+ err |= __put_user(current->thread.cr2, &sc->cr2);
+
+ return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *
+get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
+{
+ unsigned long esp;
+
+ /* Default to using normal stack */
+ esp = regs->esp;
+
+ /* This is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (sas_ss_flags(esp) == 0)
+ esp = current->sas_ss_sp + current->sas_ss_size;
+ }
+
+ /* This is the legacy signal stack switching. */
+ else if ((regs->xss & 0xffff) != __USER_DS &&
+ !(ka->sa.sa_flags & SA_RESTORER) &&
+ ka->sa.sa_restorer) {
+ esp = (unsigned long) ka->sa.sa_restorer;
+ }
+
+ esp -= frame_size;
+ /* Align the stack pointer according to the i386 ABI,
+ * i.e. so that on function entry ((sp + 4) & 15) == 0. */
+ esp = ((esp + 4) & -16ul) - 4;
+ return (void __user *) esp;
+}
+
+/* These symbols are defined with the addresses in the vsyscall page.
+ See vsyscall-sigreturn.S. */
+extern void __user __kernel_sigreturn;
+extern void __user __kernel_rt_sigreturn;
+
+static int setup_frame(int sig, struct k_sigaction *ka,
+ sigset_t *set, struct pt_regs * regs)
+{
+ void __user *restorer;
+ struct sigframe __user *frame;
+ int err = 0;
+ int usig;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ usig = current_thread_info()->exec_domain
+ && current_thread_info()->exec_domain->signal_invmap
+ && sig < 32
+ ? current_thread_info()->exec_domain->signal_invmap[sig]
+ : sig;
+
+ err = __put_user(usig, &frame->sig);
+ if (err)
+ goto give_sigsegv;
+
+ err = setup_sigcontext(&frame->sc, &frame->fpstate, regs, set->sig[0]);
+ if (err)
+ goto give_sigsegv;
+
+ if (_NSIG_WORDS > 1) {
+ err = __copy_to_user(&frame->extramask, &set->sig[1],
+ sizeof(frame->extramask));
+ if (err)
+ goto give_sigsegv;
+ }
+
+ if (current->binfmt->hasvdso)
+ restorer = (void *)VDSO_SYM(&__kernel_sigreturn);
+ else
+ restorer = (void *)&frame->retcode;
+ if (ka->sa.sa_flags & SA_RESTORER)
+ restorer = ka->sa.sa_restorer;
+
+ /* Set up to return from userspace. */
+ err |= __put_user(restorer, &frame->pretcode);
+
+ /*
+ * This is popl %eax ; movl $,%eax ; int $0x80
+ *
+ * WE DO NOT USE IT ANY MORE! It's only left here for historical
+ * reasons and because gdb uses it as a signature to notice
+ * signal handler stack frames.
+ */
+ err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
+ err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
+ err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
+
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up registers for signal handler */
+ regs->esp = (unsigned long) frame;
+ regs->eip = (unsigned long) ka->sa.sa_handler;
+ regs->eax = (unsigned long) sig;
+ regs->edx = (unsigned long) 0;
+ regs->ecx = (unsigned long) 0;
+
+ set_fs(USER_DS);
+ regs->xds = __USER_DS;
+ regs->xes = __USER_DS;
+ regs->xss = __USER_DS;
+ regs->xcs = __USER_CS;
+
+ /*
+ * Clear TF when entering the signal handler, but
+ * notify any tracer that was single-stepping it.
+ * The tracer may want to single-step inside the
+ * handler too.
+ */
+ regs->eflags &= ~TF_MASK;
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+ printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
+ current->comm, current->pid, frame, regs->eip, frame->pretcode);
+#endif
+
+ return 0;
+
+give_sigsegv:
+ force_sigsegv(sig, current);
+ return -EFAULT;
+}
+
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs * regs)
+{
+ void __user *restorer;
+ struct rt_sigframe __user *frame;
+ int err = 0;
+ int usig;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ usig = current_thread_info()->exec_domain
+ && current_thread_info()->exec_domain->signal_invmap
+ && sig < 32
+ ? current_thread_info()->exec_domain->signal_invmap[sig]
+ : sig;
+
+ err |= __put_user(usig, &frame->sig);
+ err |= __put_user(&frame->info, &frame->pinfo);
+ err |= __put_user(&frame->uc, &frame->puc);
+ err |= copy_siginfo_to_user(&frame->info, info);
+ if (err)
+ goto give_sigsegv;
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+ err |= __put_user(sas_ss_flags(regs->esp),
+ &frame->uc.uc_stack.ss_flags);
+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+ err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
+ regs, set->sig[0]);
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up to return from userspace. */
+ restorer = (void *)VDSO_SYM(&__kernel_rt_sigreturn);
+ if (ka->sa.sa_flags & SA_RESTORER)
+ restorer = ka->sa.sa_restorer;
+ err |= __put_user(restorer, &frame->pretcode);
+
+ /*
+ * This is movl $,%eax ; int $0x80
+ *
+ * WE DO NOT USE IT ANY MORE! It's only left here for historical
+ * reasons and because gdb uses it as a signature to notice
+ * signal handler stack frames.
+ */
+ err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
+ err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1));
+ err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
+
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up registers for signal handler */
+ regs->esp = (unsigned long) frame;
+ regs->eip = (unsigned long) ka->sa.sa_handler;
+ regs->eax = (unsigned long) usig;
+ regs->edx = (unsigned long) &frame->info;
+ regs->ecx = (unsigned long) &frame->uc;
+
+ set_fs(USER_DS);
+ regs->xds = __USER_DS;
+ regs->xes = __USER_DS;
+ regs->xss = __USER_DS;
+ regs->xcs = __USER_CS;
+
+ /*
+ * Clear TF when entering the signal handler, but
+ * notify any tracer that was single-stepping it.
+ * The tracer may want to single-step inside the
+ * handler too.
+ */
+ regs->eflags &= ~TF_MASK;
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+ printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
+ current->comm, current->pid, frame, regs->eip, frame->pretcode);
+#endif
+
+ return 0;
+
+give_sigsegv:
+ force_sigsegv(sig, current);
+ return -EFAULT;
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+
+static int
+handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
+ sigset_t *oldset, struct pt_regs * regs)
+{
+ int ret;
+
+ /* Are we from a system call? */
+ if (regs->orig_eax >= 0) {
+ /* If so, check system call restarting.. */
+ switch (regs->eax) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ regs->eax = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->eax = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ regs->eax = regs->orig_eax;
+ regs->eip -= 2;
+ }
+ }
+
+ /*
+ * If TF is set due to a debugger (PT_DTRACE), clear the TF flag so
+ * that register information in the sigcontext is correct.
+ */
+ if (unlikely(regs->eflags & TF_MASK)
+ && likely(current->ptrace & PT_DTRACE)) {
+ current->ptrace &= ~PT_DTRACE;
+ regs->eflags &= ~TF_MASK;
+ }
+
+ /* Set up the stack frame */
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
+ else
+ ret = setup_frame(sig, ka, oldset, regs);
+
+ if (ret == 0) {
+ spin_lock_irq(&current->sighand->siglock);
+ sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(&current->blocked,sig);
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+ }
+
+ return ret;
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ */
+static void fastcall do_signal(struct pt_regs *regs)
+{
+ siginfo_t info;
+ int signr;
+ struct k_sigaction ka;
+ sigset_t *oldset;
+
+ /*
+ * We want the common case to go fast, which
+ * is why we may in certain cases get here from
+ * kernel mode. Just return without doing anything
+ * if so. vm86 regs switched out by assembly code
+ * before reaching here, so testing against kernel
+ * CS suffices.
+ */
+ if (!user_mode(regs))
+ return;
+
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = &current->saved_sigmask;
+ else
+ oldset = &current->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ if (signr > 0) {
+ /* Reenable any watchpoints before delivering the
+ * signal to user space. The processor register will
+ * have been cleared if the watchpoint triggered
+ * inside the kernel.
+ */
+ if (unlikely(current->thread.debugreg[7]))
+ set_debugreg(current->thread.debugreg[7], 7);
+
+ /* Whee! Actually deliver the signal. */
+ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+ /* a signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+
+ return;
+ }
+
+ /* Did we come from a system call? */
+ if (regs->orig_eax >= 0) {
+ /* Restart the system call - no handlers present */
+ switch (regs->eax) {
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ regs->eax = regs->orig_eax;
+ regs->eip -= 2;
+ break;
+
+ case -ERESTART_RESTARTBLOCK:
+ regs->eax = __NR_restart_syscall;
+ regs->eip -= 2;
+ break;
+ }
+ }
+
+ /* if there's no signal to deliver, we just put the saved sigmask
+ * back */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+ }
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by the TIF_WORK_MASK flags
+ */
+__attribute__((regparm(3)))
+void do_notify_resume(struct pt_regs *regs, void *_unused,
+ __u32 thread_info_flags)
+{
+ /* Pending single-step? */
+ if (thread_info_flags & _TIF_SINGLESTEP) {
+ regs->eflags |= TF_MASK;
+ clear_thread_flag(TIF_SINGLESTEP);
+ }
+
+ /* deal with pending signal delivery */
+ if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+ do_signal(regs);
+
+ clear_thread_flag(TIF_IRET);
+}
diff --git a/arch/x86_64/kernel/signal.c b/arch/x86/kernel/signal_64.c
index 739175b01e0..739175b01e0 100644
--- a/arch/x86_64/kernel/signal.c
+++ b/arch/x86/kernel/signal_64.c
diff --git a/arch/i386/kernel/smp.c b/arch/x86/kernel/smp_32.c
index 2d35d850202..2d35d850202 100644
--- a/arch/i386/kernel/smp.c
+++ b/arch/x86/kernel/smp_32.c
diff --git a/arch/x86_64/kernel/smp.c b/arch/x86/kernel/smp_64.c
index df4a82812ad..df4a82812ad 100644
--- a/arch/x86_64/kernel/smp.c
+++ b/arch/x86/kernel/smp_64.c
diff --git a/arch/i386/kernel/smpboot.c b/arch/x86/kernel/smpboot_32.c
index e4f61d1c624..e4f61d1c624 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot_32.c
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86/kernel/smpboot_64.c
index 32f50783edc..32f50783edc 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot_64.c
diff --git a/arch/i386/kernel/smpcommon.c b/arch/x86/kernel/smpcommon_32.c
index bbfe85a0f69..bbfe85a0f69 100644
--- a/arch/i386/kernel/smpcommon.c
+++ b/arch/x86/kernel/smpcommon_32.c
diff --git a/arch/i386/kernel/srat.c b/arch/x86/kernel/srat_32.c
index 2a8713ec0f9..2a8713ec0f9 100644
--- a/arch/i386/kernel/srat.c
+++ b/arch/x86/kernel/srat_32.c
diff --git a/arch/x86_64/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index cb910911358..cb910911358 100644
--- a/arch/x86_64/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
diff --git a/arch/i386/kernel/summit.c b/arch/x86/kernel/summit_32.c
index d0e01a3acf3..d0e01a3acf3 100644
--- a/arch/i386/kernel/summit.c
+++ b/arch/x86/kernel/summit_32.c
diff --git a/arch/x86_64/kernel/suspend.c b/arch/x86/kernel/suspend_64.c
index 573c0a6e0ac..573c0a6e0ac 100644
--- a/arch/x86_64/kernel/suspend.c
+++ b/arch/x86/kernel/suspend_64.c
diff --git a/arch/x86_64/kernel/suspend_asm.S b/arch/x86/kernel/suspend_asm_64.S
index 16d183f67bc..16d183f67bc 100644
--- a/arch/x86_64/kernel/suspend_asm.S
+++ b/arch/x86/kernel/suspend_asm_64.S
diff --git a/arch/i386/kernel/sys_i386.c b/arch/x86/kernel/sys_i386_32.c
index 42147304de8..42147304de8 100644
--- a/arch/i386/kernel/sys_i386.c
+++ b/arch/x86/kernel/sys_i386_32.c
diff --git a/arch/x86_64/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index 4770b7a2052..4770b7a2052 100644
--- a/arch/x86_64/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/kernel/syscall_64.c
new file mode 100644
index 00000000000..9d498c2f8ee
--- /dev/null
+++ b/arch/x86/kernel/syscall_64.c
@@ -0,0 +1,26 @@
+/* System call table for x86-64. */
+
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <linux/cache.h>
+#include <asm/asm-offsets.h>
+
+#define __NO_STUBS
+
+#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
+#undef _ASM_X86_64_UNISTD_H_
+#include <asm/unistd_64.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, sym) [ nr ] = sym,
+#undef _ASM_X86_64_UNISTD_H_
+
+typedef void (*sys_call_ptr_t)(void);
+
+extern void sys_ni_syscall(void);
+
+const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
+ /* Smells like a like a compiler bug -- it doesn't work when the & below is removed. */
+ [0 ... __NR_syscall_max] = &sys_ni_syscall,
+#include <asm/unistd_64.h>
+};
diff --git a/arch/i386/kernel/syscall_table.S b/arch/x86/kernel/syscall_table_32.S
index 8344c70adf6..8344c70adf6 100644
--- a/arch/i386/kernel/syscall_table.S
+++ b/arch/x86/kernel/syscall_table_32.S
diff --git a/arch/i386/kernel/sysenter.c b/arch/x86/kernel/sysenter_32.c
index 4eb2e408764..4eb2e408764 100644
--- a/arch/i386/kernel/sysenter.c
+++ b/arch/x86/kernel/sysenter_32.c
diff --git a/arch/x86_64/kernel/tce.c b/arch/x86/kernel/tce_64.c
index e3f2569b2c4..e3f2569b2c4 100644
--- a/arch/x86_64/kernel/tce.c
+++ b/arch/x86/kernel/tce_64.c
diff --git a/arch/i386/kernel/time.c b/arch/x86/kernel/time_32.c
index 19a6c678d02..19a6c678d02 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/x86/kernel/time_32.c
diff --git a/arch/x86_64/kernel/time.c b/arch/x86/kernel/time_64.c
index 6d48a4e826d..6d48a4e826d 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86/kernel/time_64.c
diff --git a/arch/i386/kernel/topology.c b/arch/x86/kernel/topology.c
index 45782356a61..45782356a61 100644
--- a/arch/i386/kernel/topology.c
+++ b/arch/x86/kernel/topology.c
diff --git a/arch/i386/kernel/trampoline.S b/arch/x86/kernel/trampoline_32.S
index f62815f8d06..f62815f8d06 100644
--- a/arch/i386/kernel/trampoline.S
+++ b/arch/x86/kernel/trampoline_32.S
diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S
new file mode 100644
index 00000000000..607983b0d27
--- /dev/null
+++ b/arch/x86/kernel/trampoline_64.S
@@ -0,0 +1,166 @@
+/*
+ *
+ * Trampoline.S Derived from Setup.S by Linus Torvalds
+ *
+ * 4 Jan 1997 Michael Chastain: changed to gnu as.
+ * 15 Sept 2005 Eric Biederman: 64bit PIC support
+ *
+ * Entry: CS:IP point to the start of our code, we are
+ * in real mode with no stack, but the rest of the
+ * trampoline page to make our stack and everything else
+ * is a mystery.
+ *
+ * In fact we don't actually need a stack so we don't
+ * set one up.
+ *
+ * On entry to trampoline_data, the processor is in real mode
+ * with 16-bit addressing and 16-bit data. CS has some value
+ * and IP is zero. Thus, data addresses need to be absolute
+ * (no relocation) and are taken with regard to r_base.
+ *
+ * With the addition of trampoline_level4_pgt this code can
+ * now enter a 64bit kernel that lives at arbitrary 64bit
+ * physical addresses.
+ *
+ * If you work on this file, check the object module with objdump
+ * --full-contents --reloc to make sure there are no relocation
+ * entries.
+ */
+
+#include <linux/linkage.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/msr.h>
+#include <asm/segment.h>
+
+.data
+
+.code16
+
+ENTRY(trampoline_data)
+r_base = .
+ cli # We should be safe anyway
+ wbinvd
+ mov %cs, %ax # Code and data in the same place
+ mov %ax, %ds
+ mov %ax, %es
+ mov %ax, %ss
+
+
+ movl $0xA5A5A5A5, trampoline_data - r_base
+ # write marker for master knows we're running
+
+ # Setup stack
+ movw $(trampoline_stack_end - r_base), %sp
+
+ call verify_cpu # Verify the cpu supports long mode
+ testl %eax, %eax # Check for return code
+ jnz no_longmode
+
+ mov %cs, %ax
+ movzx %ax, %esi # Find the 32bit trampoline location
+ shll $4, %esi
+
+ # Fixup the vectors
+ addl %esi, startup_32_vector - r_base
+ addl %esi, startup_64_vector - r_base
+ addl %esi, tgdt + 2 - r_base # Fixup the gdt pointer
+
+ /*
+ * GDT tables in non default location kernel can be beyond 16MB and
+ * lgdt will not be able to load the address as in real mode default
+ * operand size is 16bit. Use lgdtl instead to force operand size
+ * to 32 bit.
+ */
+
+ lidtl tidt - r_base # load idt with 0, 0
+ lgdtl tgdt - r_base # load gdt with whatever is appropriate
+
+ xor %ax, %ax
+ inc %ax # protected mode (PE) bit
+ lmsw %ax # into protected mode
+
+ # flush prefetch and jump to startup_32
+ ljmpl *(startup_32_vector - r_base)
+
+ .code32
+ .balign 4
+startup_32:
+ movl $__KERNEL_DS, %eax # Initialize the %ds segment register
+ movl %eax, %ds
+
+ xorl %eax, %eax
+ btsl $5, %eax # Enable PAE mode
+ movl %eax, %cr4
+
+ # Setup trampoline 4 level pagetables
+ leal (trampoline_level4_pgt - r_base)(%esi), %eax
+ movl %eax, %cr3
+
+ movl $MSR_EFER, %ecx
+ movl $(1 << _EFER_LME), %eax # Enable Long Mode
+ xorl %edx, %edx
+ wrmsr
+
+ xorl %eax, %eax
+ btsl $31, %eax # Enable paging and in turn activate Long Mode
+ btsl $0, %eax # Enable protected mode
+ movl %eax, %cr0
+
+ /*
+ * At this point we're in long mode but in 32bit compatibility mode
+ * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
+ * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use
+ * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+ */
+ ljmp *(startup_64_vector - r_base)(%esi)
+
+ .code64
+ .balign 4
+startup_64:
+ # Now jump into the kernel using virtual addresses
+ movq $secondary_startup_64, %rax
+ jmp *%rax
+
+ .code16
+no_longmode:
+ hlt
+ jmp no_longmode
+#include "verify_cpu_64.S"
+
+ # Careful these need to be in the same 64K segment as the above;
+tidt:
+ .word 0 # idt limit = 0
+ .word 0, 0 # idt base = 0L
+
+ # Duplicate the global descriptor table
+ # so the kernel can live anywhere
+ .balign 4
+tgdt:
+ .short tgdt_end - tgdt # gdt limit
+ .long tgdt - r_base
+ .short 0
+ .quad 0x00cf9b000000ffff # __KERNEL32_CS
+ .quad 0x00af9b000000ffff # __KERNEL_CS
+ .quad 0x00cf93000000ffff # __KERNEL_DS
+tgdt_end:
+
+ .balign 4
+startup_32_vector:
+ .long startup_32 - r_base
+ .word __KERNEL32_CS, 0
+
+ .balign 4
+startup_64_vector:
+ .long startup_64 - r_base
+ .word __KERNEL_CS, 0
+
+trampoline_stack:
+ .org 0x1000
+trampoline_stack_end:
+ENTRY(trampoline_level4_pgt)
+ .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
+ .fill 510,8,0
+ .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
+
+ENTRY(trampoline_end)
diff --git a/arch/i386/kernel/traps.c b/arch/x86/kernel/traps_32.c
index 47b0bef335b..47b0bef335b 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/x86/kernel/traps_32.c
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86/kernel/traps_64.c
index 03888420775..03888420775 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86/kernel/traps_64.c
diff --git a/arch/i386/kernel/tsc.c b/arch/x86/kernel/tsc_32.c
index a39280b4dd3..a39280b4dd3 100644
--- a/arch/i386/kernel/tsc.c
+++ b/arch/x86/kernel/tsc_32.c
diff --git a/arch/x86_64/kernel/tsc.c b/arch/x86/kernel/tsc_64.c
index 2a59bde663f..2a59bde663f 100644
--- a/arch/x86_64/kernel/tsc.c
+++ b/arch/x86/kernel/tsc_64.c
diff --git a/arch/x86_64/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index 355f5f506c8..355f5f506c8 100644
--- a/arch/x86_64/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
diff --git a/arch/x86_64/kernel/verify_cpu.S b/arch/x86/kernel/verify_cpu_64.S
index 45b6f8a975a..45b6f8a975a 100644
--- a/arch/x86_64/kernel/verify_cpu.S
+++ b/arch/x86/kernel/verify_cpu_64.S
diff --git a/arch/i386/kernel/vm86.c b/arch/x86/kernel/vm86_32.c
index f2dcd1d27c0..f2dcd1d27c0 100644
--- a/arch/i386/kernel/vm86.c
+++ b/arch/x86/kernel/vm86_32.c
diff --git a/arch/i386/kernel/vmi.c b/arch/x86/kernel/vmi_32.c
index 18673e0f193..18673e0f193 100644
--- a/arch/i386/kernel/vmi.c
+++ b/arch/x86/kernel/vmi_32.c
diff --git a/arch/i386/kernel/vmiclock.c b/arch/x86/kernel/vmiclock_32.c
index b1b5ab08b26..b1b5ab08b26 100644
--- a/arch/i386/kernel/vmiclock.c
+++ b/arch/x86/kernel/vmiclock_32.c
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
new file mode 100644
index 00000000000..849ee611f01
--- /dev/null
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "vmlinux_32.lds.S"
+#else
+# include "vmlinux_64.lds.S"
+#endif
diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index 7d72cce0052..7d72cce0052 100644
--- a/arch/i386/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index ba8ea97abd2..ba8ea97abd2 100644
--- a/arch/x86_64/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
diff --git a/arch/x86_64/kernel/vsmp.c b/arch/x86/kernel/vsmp_64.c
index 414caf0c5f9..414caf0c5f9 100644
--- a/arch/x86_64/kernel/vsmp.c
+++ b/arch/x86/kernel/vsmp_64.c
diff --git a/arch/x86/kernel/vsyscall-int80_32.S b/arch/x86/kernel/vsyscall-int80_32.S
new file mode 100644
index 00000000000..103cab6aa7c
--- /dev/null
+++ b/arch/x86/kernel/vsyscall-int80_32.S
@@ -0,0 +1,53 @@
+/*
+ * Code for the vsyscall page. This version uses the old int $0x80 method.
+ *
+ * NOTE:
+ * 1) __kernel_vsyscall _must_ be first in this page.
+ * 2) there are alignment constraints on this stub, see vsyscall-sigreturn.S
+ * for details.
+ */
+
+ .text
+ .globl __kernel_vsyscall
+ .type __kernel_vsyscall,@function
+__kernel_vsyscall:
+.LSTART_vsyscall:
+ int $0x80
+ ret
+.LEND_vsyscall:
+ .size __kernel_vsyscall,.-.LSTART_vsyscall
+ .previous
+
+ .section .eh_frame,"a",@progbits
+.LSTARTFRAMEDLSI:
+ .long .LENDCIEDLSI-.LSTARTCIEDLSI
+.LSTARTCIEDLSI:
+ .long 0 /* CIE ID */
+ .byte 1 /* Version number */
+ .string "zR" /* NUL-terminated augmentation string */
+ .uleb128 1 /* Code alignment factor */
+ .sleb128 -4 /* Data alignment factor */
+ .byte 8 /* Return address register column */
+ .uleb128 1 /* Augmentation value length */
+ .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
+ .byte 0x0c /* DW_CFA_def_cfa */
+ .uleb128 4
+ .uleb128 4
+ .byte 0x88 /* DW_CFA_offset, column 0x8 */
+ .uleb128 1
+ .align 4
+.LENDCIEDLSI:
+ .long .LENDFDEDLSI-.LSTARTFDEDLSI /* Length FDE */
+.LSTARTFDEDLSI:
+ .long .LSTARTFDEDLSI-.LSTARTFRAMEDLSI /* CIE pointer */
+ .long .LSTART_vsyscall-. /* PC-relative start address */
+ .long .LEND_vsyscall-.LSTART_vsyscall
+ .uleb128 0
+ .align 4
+.LENDFDEDLSI:
+ .previous
+
+/*
+ * Get the common code for the sigreturn entry points.
+ */
+#include "vsyscall-sigreturn_32.S"
diff --git a/arch/x86/kernel/vsyscall-note_32.S b/arch/x86/kernel/vsyscall-note_32.S
new file mode 100644
index 00000000000..fcf376a37f7
--- /dev/null
+++ b/arch/x86/kernel/vsyscall-note_32.S
@@ -0,0 +1,45 @@
+/*
+ * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
+ * Here we can supply some information useful to userland.
+ */
+
+#include <linux/version.h>
+#include <linux/elfnote.h>
+
+/* Ideally this would use UTS_NAME, but using a quoted string here
+ doesn't work. Remember to change this when changing the
+ kernel's name. */
+ELFNOTE_START(Linux, 0, "a")
+ .long LINUX_VERSION_CODE
+ELFNOTE_END
+
+#ifdef CONFIG_XEN
+/*
+ * Add a special note telling glibc's dynamic linker a fake hardware
+ * flavor that it will use to choose the search path for libraries in the
+ * same way it uses real hardware capabilities like "mmx".
+ * We supply "nosegneg" as the fake capability, to indicate that we
+ * do not like negative offsets in instructions using segment overrides,
+ * since we implement those inefficiently. This makes it possible to
+ * install libraries optimized to avoid those access patterns in someplace
+ * like /lib/i686/tls/nosegneg. Note that an /etc/ld.so.conf.d/file
+ * corresponding to the bits here is needed to make ldconfig work right.
+ * It should contain:
+ * hwcap 1 nosegneg
+ * to match the mapping of bit to name that we give here.
+ *
+ * At runtime, the fake hardware feature will be considered to be present
+ * if its bit is set in the mask word. So, we start with the mask 0, and
+ * at boot time we set VDSO_NOTE_NONEGSEG_BIT if running under Xen.
+ */
+
+#include "../../x86/xen/vdso.h" /* Defines VDSO_NOTE_NONEGSEG_BIT. */
+
+ .globl VDSO_NOTE_MASK
+ELFNOTE_START(GNU, 2, "a")
+ .long 1 /* ncaps */
+VDSO_NOTE_MASK:
+ .long 0 /* mask */
+ .byte VDSO_NOTE_NONEGSEG_BIT; .asciz "nosegneg" /* bit, name */
+ELFNOTE_END
+#endif
diff --git a/arch/i386/kernel/vsyscall-sigreturn.S b/arch/x86/kernel/vsyscall-sigreturn_32.S
index a92262f4165..a92262f4165 100644
--- a/arch/i386/kernel/vsyscall-sigreturn.S
+++ b/arch/x86/kernel/vsyscall-sigreturn_32.S
diff --git a/arch/x86/kernel/vsyscall-sysenter_32.S b/arch/x86/kernel/vsyscall-sysenter_32.S
new file mode 100644
index 00000000000..ed879bf4299
--- /dev/null
+++ b/arch/x86/kernel/vsyscall-sysenter_32.S
@@ -0,0 +1,122 @@
+/*
+ * Code for the vsyscall page. This version uses the sysenter instruction.
+ *
+ * NOTE:
+ * 1) __kernel_vsyscall _must_ be first in this page.
+ * 2) there are alignment constraints on this stub, see vsyscall-sigreturn.S
+ * for details.
+ */
+
+/*
+ * The caller puts arg2 in %ecx, which gets pushed. The kernel will use
+ * %ecx itself for arg2. The pushing is because the sysexit instruction
+ * (found in entry.S) requires that we clobber %ecx with the desired %esp.
+ * User code might expect that %ecx is unclobbered though, as it would be
+ * for returning via the iret instruction, so we must push and pop.
+ *
+ * The caller puts arg3 in %edx, which the sysexit instruction requires
+ * for %eip. Thus, exactly as for arg2, we must push and pop.
+ *
+ * Arg6 is different. The caller puts arg6 in %ebp. Since the sysenter
+ * instruction clobbers %esp, the user's %esp won't even survive entry
+ * into the kernel. We store %esp in %ebp. Code in entry.S must fetch
+ * arg6 from the stack.
+ *
+ * You can not use this vsyscall for the clone() syscall because the
+ * three dwords on the parent stack do not get copied to the child.
+ */
+ .text
+ .globl __kernel_vsyscall
+ .type __kernel_vsyscall,@function
+__kernel_vsyscall:
+.LSTART_vsyscall:
+ push %ecx
+.Lpush_ecx:
+ push %edx
+.Lpush_edx:
+ push %ebp
+.Lenter_kernel:
+ movl %esp,%ebp
+ sysenter
+
+ /* 7: align return point with nop's to make disassembly easier */
+ .space 7,0x90
+
+ /* 14: System call restart point is here! (SYSENTER_RETURN-2) */
+ jmp .Lenter_kernel
+ /* 16: System call normal return point is here! */
+ .globl SYSENTER_RETURN /* Symbol used by sysenter.c */
+SYSENTER_RETURN:
+ pop %ebp
+.Lpop_ebp:
+ pop %edx
+.Lpop_edx:
+ pop %ecx
+.Lpop_ecx:
+ ret
+.LEND_vsyscall:
+ .size __kernel_vsyscall,.-.LSTART_vsyscall
+ .previous
+
+ .section .eh_frame,"a",@progbits
+.LSTARTFRAMEDLSI:
+ .long .LENDCIEDLSI-.LSTARTCIEDLSI
+.LSTARTCIEDLSI:
+ .long 0 /* CIE ID */
+ .byte 1 /* Version number */
+ .string "zR" /* NUL-terminated augmentation string */
+ .uleb128 1 /* Code alignment factor */
+ .sleb128 -4 /* Data alignment factor */
+ .byte 8 /* Return address register column */
+ .uleb128 1 /* Augmentation value length */
+ .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
+ .byte 0x0c /* DW_CFA_def_cfa */
+ .uleb128 4
+ .uleb128 4
+ .byte 0x88 /* DW_CFA_offset, column 0x8 */
+ .uleb128 1
+ .align 4
+.LENDCIEDLSI:
+ .long .LENDFDEDLSI-.LSTARTFDEDLSI /* Length FDE */
+.LSTARTFDEDLSI:
+ .long .LSTARTFDEDLSI-.LSTARTFRAMEDLSI /* CIE pointer */
+ .long .LSTART_vsyscall-. /* PC-relative start address */
+ .long .LEND_vsyscall-.LSTART_vsyscall
+ .uleb128 0
+ /* What follows are the instructions for the table generation.
+ We have to record all changes of the stack pointer. */
+ .byte 0x04 /* DW_CFA_advance_loc4 */
+ .long .Lpush_ecx-.LSTART_vsyscall
+ .byte 0x0e /* DW_CFA_def_cfa_offset */
+ .byte 0x08 /* RA at offset 8 now */
+ .byte 0x04 /* DW_CFA_advance_loc4 */
+ .long .Lpush_edx-.Lpush_ecx
+ .byte 0x0e /* DW_CFA_def_cfa_offset */
+ .byte 0x0c /* RA at offset 12 now */
+ .byte 0x04 /* DW_CFA_advance_loc4 */
+ .long .Lenter_kernel-.Lpush_edx
+ .byte 0x0e /* DW_CFA_def_cfa_offset */
+ .byte 0x10 /* RA at offset 16 now */
+ .byte 0x85, 0x04 /* DW_CFA_offset %ebp -16 */
+ /* Finally the epilogue. */
+ .byte 0x04 /* DW_CFA_advance_loc4 */
+ .long .Lpop_ebp-.Lenter_kernel
+ .byte 0x0e /* DW_CFA_def_cfa_offset */
+ .byte 0x0c /* RA at offset 12 now */
+ .byte 0xc5 /* DW_CFA_restore %ebp */
+ .byte 0x04 /* DW_CFA_advance_loc4 */
+ .long .Lpop_edx-.Lpop_ebp
+ .byte 0x0e /* DW_CFA_def_cfa_offset */
+ .byte 0x08 /* RA at offset 8 now */
+ .byte 0x04 /* DW_CFA_advance_loc4 */
+ .long .Lpop_ecx-.Lpop_edx
+ .byte 0x0e /* DW_CFA_def_cfa_offset */
+ .byte 0x04 /* RA at offset 4 now */
+ .align 4
+.LENDFDEDLSI:
+ .previous
+
+/*
+ * Get the common code for the sigreturn entry points.
+ */
+#include "vsyscall-sigreturn_32.S"
diff --git a/arch/x86/kernel/vsyscall_32.S b/arch/x86/kernel/vsyscall_32.S
new file mode 100644
index 00000000000..a5ab3dc4fd2
--- /dev/null
+++ b/arch/x86/kernel/vsyscall_32.S
@@ -0,0 +1,15 @@
+#include <linux/init.h>
+
+__INITDATA
+
+ .globl vsyscall_int80_start, vsyscall_int80_end
+vsyscall_int80_start:
+ .incbin "arch/x86/kernel/vsyscall-int80_32.so"
+vsyscall_int80_end:
+
+ .globl vsyscall_sysenter_start, vsyscall_sysenter_end
+vsyscall_sysenter_start:
+ .incbin "arch/x86/kernel/vsyscall-sysenter_32.so"
+vsyscall_sysenter_end:
+
+__FINIT
diff --git a/arch/i386/kernel/vsyscall.lds.S b/arch/x86/kernel/vsyscall_32.lds.S
index 4a8b0ed9b8f..4a8b0ed9b8f 100644
--- a/arch/i386/kernel/vsyscall.lds.S
+++ b/arch/x86/kernel/vsyscall_32.lds.S
diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86/kernel/vsyscall_64.c
index 06c34949bfd..06c34949bfd 100644
--- a/arch/x86_64/kernel/vsyscall.c
+++ b/arch/x86/kernel/vsyscall_64.c
diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86/kernel/x8664_ksyms_64.c
index 77c25b30763..77c25b30763 100644
--- a/arch/x86_64/kernel/x8664_ksyms.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
new file mode 100644
index 00000000000..329da276c6f
--- /dev/null
+++ b/arch/x86/lib/Makefile
@@ -0,0 +1,5 @@
+ifeq ($(CONFIG_X86_32),y)
+include ${srctree}/arch/x86/lib/Makefile_32
+else
+include ${srctree}/arch/x86/lib/Makefile_64
+endif
diff --git a/arch/x86/lib/Makefile_32 b/arch/x86/lib/Makefile_32
new file mode 100644
index 00000000000..98d1f1e2e2e
--- /dev/null
+++ b/arch/x86/lib/Makefile_32
@@ -0,0 +1,11 @@
+#
+# Makefile for i386-specific library files..
+#
+
+
+lib-y = checksum_32.o delay_32.o usercopy_32.o getuser_32.o putuser_32.o memcpy_32.o strstr_32.o \
+ bitops_32.o semaphore_32.o string_32.o
+
+lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o
+
+obj-$(CONFIG_SMP) += msr-on-cpu.o
diff --git a/arch/x86/lib/Makefile_64 b/arch/x86/lib/Makefile_64
new file mode 100644
index 00000000000..bbabad3c933
--- /dev/null
+++ b/arch/x86/lib/Makefile_64
@@ -0,0 +1,13 @@
+#
+# Makefile for x86_64-specific library files.
+#
+
+CFLAGS_csum-partial_64.o := -funroll-loops
+
+obj-y := io_64.o iomap_copy_64.o
+obj-$(CONFIG_SMP) += msr-on-cpu.o
+
+lib-y := csum-partial_64.o csum-copy_64.o csum-wrappers_64.o delay_64.o \
+ usercopy_64.o getuser_64.o putuser_64.o \
+ thunk_64.o clear_page_64.o copy_page_64.o bitstr_64.o bitops_64.o
+lib-y += memcpy_64.o memmove_64.o memset_64.o copy_user_64.o rwlock_64.o copy_user_nocache_64.o
diff --git a/arch/i386/lib/bitops.c b/arch/x86/lib/bitops_32.c
index afd0045595d..afd0045595d 100644
--- a/arch/i386/lib/bitops.c
+++ b/arch/x86/lib/bitops_32.c
diff --git a/arch/x86_64/lib/bitops.c b/arch/x86/lib/bitops_64.c
index 95b6d9639fb..95b6d9639fb 100644
--- a/arch/x86_64/lib/bitops.c
+++ b/arch/x86/lib/bitops_64.c
diff --git a/arch/x86_64/lib/bitstr.c b/arch/x86/lib/bitstr_64.c
index 24676609a6a..24676609a6a 100644
--- a/arch/x86_64/lib/bitstr.c
+++ b/arch/x86/lib/bitstr_64.c
diff --git a/arch/i386/lib/checksum.S b/arch/x86/lib/checksum_32.S
index adbccd0bbb7..adbccd0bbb7 100644
--- a/arch/i386/lib/checksum.S
+++ b/arch/x86/lib/checksum_32.S
diff --git a/arch/x86_64/lib/clear_page.S b/arch/x86/lib/clear_page_64.S
index 9a10a78bb4a..9a10a78bb4a 100644
--- a/arch/x86_64/lib/clear_page.S
+++ b/arch/x86/lib/clear_page_64.S
diff --git a/arch/x86_64/lib/copy_page.S b/arch/x86/lib/copy_page_64.S
index 727a5d46d2f..727a5d46d2f 100644
--- a/arch/x86_64/lib/copy_page.S
+++ b/arch/x86/lib/copy_page_64.S
diff --git a/arch/x86_64/lib/copy_user.S b/arch/x86/lib/copy_user_64.S
index 70bebd31040..70bebd31040 100644
--- a/arch/x86_64/lib/copy_user.S
+++ b/arch/x86/lib/copy_user_64.S
diff --git a/arch/x86_64/lib/copy_user_nocache.S b/arch/x86/lib/copy_user_nocache_64.S
index 4620efb12f1..4620efb12f1 100644
--- a/arch/x86_64/lib/copy_user_nocache.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
diff --git a/arch/x86_64/lib/csum-copy.S b/arch/x86/lib/csum-copy_64.S
index f0dba36578e..f0dba36578e 100644
--- a/arch/x86_64/lib/csum-copy.S
+++ b/arch/x86/lib/csum-copy_64.S
diff --git a/arch/x86_64/lib/csum-partial.c b/arch/x86/lib/csum-partial_64.c
index bc503f50690..bc503f50690 100644
--- a/arch/x86_64/lib/csum-partial.c
+++ b/arch/x86/lib/csum-partial_64.c
diff --git a/arch/x86_64/lib/csum-wrappers.c b/arch/x86/lib/csum-wrappers_64.c
index fd42a4a095f..fd42a4a095f 100644
--- a/arch/x86_64/lib/csum-wrappers.c
+++ b/arch/x86/lib/csum-wrappers_64.c
diff --git a/arch/i386/lib/delay.c b/arch/x86/lib/delay_32.c
index f6edb11364d..f6edb11364d 100644
--- a/arch/i386/lib/delay.c
+++ b/arch/x86/lib/delay_32.c
diff --git a/arch/x86_64/lib/delay.c b/arch/x86/lib/delay_64.c
index 2dbebd30834..2dbebd30834 100644
--- a/arch/x86_64/lib/delay.c
+++ b/arch/x86/lib/delay_64.c
diff --git a/arch/i386/lib/getuser.S b/arch/x86/lib/getuser_32.S
index 6d84b53f12a..6d84b53f12a 100644
--- a/arch/i386/lib/getuser.S
+++ b/arch/x86/lib/getuser_32.S
diff --git a/arch/x86_64/lib/getuser.S b/arch/x86/lib/getuser_64.S
index 5448876261f..5448876261f 100644
--- a/arch/x86_64/lib/getuser.S
+++ b/arch/x86/lib/getuser_64.S
diff --git a/arch/x86_64/lib/io.c b/arch/x86/lib/io_64.c
index 87b4a4e1803..87b4a4e1803 100644
--- a/arch/x86_64/lib/io.c
+++ b/arch/x86/lib/io_64.c
diff --git a/arch/x86_64/lib/iomap_copy.S b/arch/x86/lib/iomap_copy_64.S
index 05a95e713da..05a95e713da 100644
--- a/arch/x86_64/lib/iomap_copy.S
+++ b/arch/x86/lib/iomap_copy_64.S
diff --git a/arch/i386/lib/memcpy.c b/arch/x86/lib/memcpy_32.c
index 8ac51b82a63..8ac51b82a63 100644
--- a/arch/i386/lib/memcpy.c
+++ b/arch/x86/lib/memcpy_32.c
diff --git a/arch/x86_64/lib/memcpy.S b/arch/x86/lib/memcpy_64.S
index c22981fa2f3..c22981fa2f3 100644
--- a/arch/x86_64/lib/memcpy.S
+++ b/arch/x86/lib/memcpy_64.S
diff --git a/arch/x86_64/lib/memmove.c b/arch/x86/lib/memmove_64.c
index 751ebae8ec4..751ebae8ec4 100644
--- a/arch/x86_64/lib/memmove.c
+++ b/arch/x86/lib/memmove_64.c
diff --git a/arch/x86_64/lib/memset.S b/arch/x86/lib/memset_64.S
index 2c5948116bd..2c5948116bd 100644
--- a/arch/x86_64/lib/memset.S
+++ b/arch/x86/lib/memset_64.S
diff --git a/arch/i386/lib/mmx.c b/arch/x86/lib/mmx_32.c
index 28084d2e8dd..28084d2e8dd 100644
--- a/arch/i386/lib/mmx.c
+++ b/arch/x86/lib/mmx_32.c
diff --git a/arch/i386/lib/msr-on-cpu.c b/arch/x86/lib/msr-on-cpu.c
index 7767962f25d..7767962f25d 100644
--- a/arch/i386/lib/msr-on-cpu.c
+++ b/arch/x86/lib/msr-on-cpu.c
diff --git a/arch/i386/lib/putuser.S b/arch/x86/lib/putuser_32.S
index f58fba109d1..f58fba109d1 100644
--- a/arch/i386/lib/putuser.S
+++ b/arch/x86/lib/putuser_32.S
diff --git a/arch/x86_64/lib/putuser.S b/arch/x86/lib/putuser_64.S
index 4989f5a8fa9..4989f5a8fa9 100644
--- a/arch/x86_64/lib/putuser.S
+++ b/arch/x86/lib/putuser_64.S
diff --git a/arch/x86_64/lib/rwlock.S b/arch/x86/lib/rwlock_64.S
index 0cde1f80731..0cde1f80731 100644
--- a/arch/x86_64/lib/rwlock.S
+++ b/arch/x86/lib/rwlock_64.S
diff --git a/arch/i386/lib/semaphore.S b/arch/x86/lib/semaphore_32.S
index c01eb39c0b4..c01eb39c0b4 100644
--- a/arch/i386/lib/semaphore.S
+++ b/arch/x86/lib/semaphore_32.S
diff --git a/arch/i386/lib/string.c b/arch/x86/lib/string_32.c
index 2c773fefa3d..2c773fefa3d 100644
--- a/arch/i386/lib/string.c
+++ b/arch/x86/lib/string_32.c
diff --git a/arch/i386/lib/strstr.c b/arch/x86/lib/strstr_32.c
index a3dafbf59da..a3dafbf59da 100644
--- a/arch/i386/lib/strstr.c
+++ b/arch/x86/lib/strstr_32.c
diff --git a/arch/x86_64/lib/thunk.S b/arch/x86/lib/thunk_64.S
index 55e586d352d..55e586d352d 100644
--- a/arch/x86_64/lib/thunk.S
+++ b/arch/x86/lib/thunk_64.S
diff --git a/arch/i386/lib/usercopy.c b/arch/x86/lib/usercopy_32.c
index 9f38b12b4af..9f38b12b4af 100644
--- a/arch/i386/lib/usercopy.c
+++ b/arch/x86/lib/usercopy_32.c
diff --git a/arch/x86_64/lib/usercopy.c b/arch/x86/lib/usercopy_64.c
index 893d43f838c..893d43f838c 100644
--- a/arch/x86_64/lib/usercopy.c
+++ b/arch/x86/lib/usercopy_64.c
diff --git a/arch/i386/mach-default/Makefile b/arch/x86/mach-default/Makefile
index 012fe34459e..012fe34459e 100644
--- a/arch/i386/mach-default/Makefile
+++ b/arch/x86/mach-default/Makefile
diff --git a/arch/i386/mach-default/setup.c b/arch/x86/mach-default/setup.c
index 7f635c7a238..7f635c7a238 100644
--- a/arch/i386/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
diff --git a/arch/i386/mach-es7000/Makefile b/arch/x86/mach-es7000/Makefile
index 69dd4da218d..69dd4da218d 100644
--- a/arch/i386/mach-es7000/Makefile
+++ b/arch/x86/mach-es7000/Makefile
diff --git a/arch/i386/mach-es7000/es7000.h b/arch/x86/mach-es7000/es7000.h
index c8d5aa132fa..c8d5aa132fa 100644
--- a/arch/i386/mach-es7000/es7000.h
+++ b/arch/x86/mach-es7000/es7000.h
diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c
index ab99072d3f9..ab99072d3f9 100644
--- a/arch/i386/mach-es7000/es7000plat.c
+++ b/arch/x86/mach-es7000/es7000plat.c
diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile
new file mode 100644
index 00000000000..19d6d407737
--- /dev/null
+++ b/arch/x86/mach-generic/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the generic architecture
+#
+
+EXTRA_CFLAGS := -Iarch/x86/kernel
+
+obj-y := probe.o summit.o bigsmp.o es7000.o default.o
+obj-y += ../../x86/mach-es7000/
diff --git a/arch/i386/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 58a477baec3..58a477baec3 100644
--- a/arch/i386/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
diff --git a/arch/i386/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 8685208d851..8685208d851 100644
--- a/arch/i386/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
diff --git a/arch/i386/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 4742626f08c..4742626f08c 100644
--- a/arch/i386/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
diff --git a/arch/i386/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
index 74f3da63442..74f3da63442 100644
--- a/arch/i386/mach-generic/probe.c
+++ b/arch/x86/mach-generic/probe.c
diff --git a/arch/i386/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 74883ccb8f7..74883ccb8f7 100644
--- a/arch/i386/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
diff --git a/arch/i386/mach-visws/Makefile b/arch/x86/mach-visws/Makefile
index 835fd96ad76..835fd96ad76 100644
--- a/arch/i386/mach-visws/Makefile
+++ b/arch/x86/mach-visws/Makefile
diff --git a/arch/i386/mach-visws/mpparse.c b/arch/x86/mach-visws/mpparse.c
index f3c74fab8b9..f3c74fab8b9 100644
--- a/arch/i386/mach-visws/mpparse.c
+++ b/arch/x86/mach-visws/mpparse.c
diff --git a/arch/i386/mach-visws/reboot.c b/arch/x86/mach-visws/reboot.c
index 99332abfad4..99332abfad4 100644
--- a/arch/i386/mach-visws/reboot.c
+++ b/arch/x86/mach-visws/reboot.c
diff --git a/arch/i386/mach-visws/setup.c b/arch/x86/mach-visws/setup.c
index 1f81f10e03a..1f81f10e03a 100644
--- a/arch/i386/mach-visws/setup.c
+++ b/arch/x86/mach-visws/setup.c
diff --git a/arch/i386/mach-visws/traps.c b/arch/x86/mach-visws/traps.c
index 843b67acf43..843b67acf43 100644
--- a/arch/i386/mach-visws/traps.c
+++ b/arch/x86/mach-visws/traps.c
diff --git a/arch/i386/mach-visws/visws_apic.c b/arch/x86/mach-visws/visws_apic.c
index 710faf71a65..710faf71a65 100644
--- a/arch/i386/mach-visws/visws_apic.c
+++ b/arch/x86/mach-visws/visws_apic.c
diff --git a/arch/x86/mach-voyager/Makefile b/arch/x86/mach-voyager/Makefile
new file mode 100644
index 00000000000..15c250b371d
--- /dev/null
+++ b/arch/x86/mach-voyager/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+EXTRA_CFLAGS := -Iarch/x86/kernel
+obj-y := setup.o voyager_basic.o voyager_thread.o
+
+obj-$(CONFIG_SMP) += voyager_smp.o voyager_cat.o
diff --git a/arch/i386/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c
index 2b55694e640..2b55694e640 100644
--- a/arch/i386/mach-voyager/setup.c
+++ b/arch/x86/mach-voyager/setup.c
diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/x86/mach-voyager/voyager_basic.c
index 9b77b39b71a..9b77b39b71a 100644
--- a/arch/i386/mach-voyager/voyager_basic.c
+++ b/arch/x86/mach-voyager/voyager_basic.c
diff --git a/arch/i386/mach-voyager/voyager_cat.c b/arch/x86/mach-voyager/voyager_cat.c
index 26a2d4c54b6..26a2d4c54b6 100644
--- a/arch/i386/mach-voyager/voyager_cat.c
+++ b/arch/x86/mach-voyager/voyager_cat.c
diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index b87f8548e75..b87f8548e75 100644
--- a/arch/i386/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
diff --git a/arch/i386/mach-voyager/voyager_thread.c b/arch/x86/mach-voyager/voyager_thread.c
index f9d59533815..f9d59533815 100644
--- a/arch/i386/mach-voyager/voyager_thread.c
+++ b/arch/x86/mach-voyager/voyager_thread.c
diff --git a/arch/i386/math-emu/Makefile b/arch/x86/math-emu/Makefile
index 9c943fa6ce6..9c943fa6ce6 100644
--- a/arch/i386/math-emu/Makefile
+++ b/arch/x86/math-emu/Makefile
diff --git a/arch/i386/math-emu/README b/arch/x86/math-emu/README
index e6235491d6e..e6235491d6e 100644
--- a/arch/i386/math-emu/README
+++ b/arch/x86/math-emu/README
diff --git a/arch/i386/math-emu/control_w.h b/arch/x86/math-emu/control_w.h
index ae2274dbd30..ae2274dbd30 100644
--- a/arch/i386/math-emu/control_w.h
+++ b/arch/x86/math-emu/control_w.h
diff --git a/arch/i386/math-emu/div_Xsig.S b/arch/x86/math-emu/div_Xsig.S
index f77ba3058b3..f77ba3058b3 100644
--- a/arch/i386/math-emu/div_Xsig.S
+++ b/arch/x86/math-emu/div_Xsig.S
diff --git a/arch/i386/math-emu/div_small.S b/arch/x86/math-emu/div_small.S
index 47099628fa4..47099628fa4 100644
--- a/arch/i386/math-emu/div_small.S
+++ b/arch/x86/math-emu/div_small.S
diff --git a/arch/i386/math-emu/errors.c b/arch/x86/math-emu/errors.c
index a1b0d22f697..a1b0d22f697 100644
--- a/arch/i386/math-emu/errors.c
+++ b/arch/x86/math-emu/errors.c
diff --git a/arch/i386/math-emu/exception.h b/arch/x86/math-emu/exception.h
index b463f21a811..b463f21a811 100644
--- a/arch/i386/math-emu/exception.h
+++ b/arch/x86/math-emu/exception.h
diff --git a/arch/i386/math-emu/fpu_arith.c b/arch/x86/math-emu/fpu_arith.c
index 6972dec01af..6972dec01af 100644
--- a/arch/i386/math-emu/fpu_arith.c
+++ b/arch/x86/math-emu/fpu_arith.c
diff --git a/arch/i386/math-emu/fpu_asm.h b/arch/x86/math-emu/fpu_asm.h
index 9ba12416df1..9ba12416df1 100644
--- a/arch/i386/math-emu/fpu_asm.h
+++ b/arch/x86/math-emu/fpu_asm.h
diff --git a/arch/i386/math-emu/fpu_aux.c b/arch/x86/math-emu/fpu_aux.c
index 20886cfb9f7..20886cfb9f7 100644
--- a/arch/i386/math-emu/fpu_aux.c
+++ b/arch/x86/math-emu/fpu_aux.c
diff --git a/arch/i386/math-emu/fpu_emu.h b/arch/x86/math-emu/fpu_emu.h
index 65120f52385..65120f52385 100644
--- a/arch/i386/math-emu/fpu_emu.h
+++ b/arch/x86/math-emu/fpu_emu.h
diff --git a/arch/i386/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
index 1853524c8b5..1853524c8b5 100644
--- a/arch/i386/math-emu/fpu_entry.c
+++ b/arch/x86/math-emu/fpu_entry.c
diff --git a/arch/i386/math-emu/fpu_etc.c b/arch/x86/math-emu/fpu_etc.c
index e3b5d465587..e3b5d465587 100644
--- a/arch/i386/math-emu/fpu_etc.c
+++ b/arch/x86/math-emu/fpu_etc.c
diff --git a/arch/i386/math-emu/fpu_proto.h b/arch/x86/math-emu/fpu_proto.h
index 37a8a7fe7e2..37a8a7fe7e2 100644
--- a/arch/i386/math-emu/fpu_proto.h
+++ b/arch/x86/math-emu/fpu_proto.h
diff --git a/arch/i386/math-emu/fpu_system.h b/arch/x86/math-emu/fpu_system.h
index a3ae28c49dd..a3ae28c49dd 100644
--- a/arch/i386/math-emu/fpu_system.h
+++ b/arch/x86/math-emu/fpu_system.h
diff --git a/arch/i386/math-emu/fpu_tags.c b/arch/x86/math-emu/fpu_tags.c
index cb436fe20e4..cb436fe20e4 100644
--- a/arch/i386/math-emu/fpu_tags.c
+++ b/arch/x86/math-emu/fpu_tags.c
diff --git a/arch/i386/math-emu/fpu_trig.c b/arch/x86/math-emu/fpu_trig.c
index 403cbde1d42..403cbde1d42 100644
--- a/arch/i386/math-emu/fpu_trig.c
+++ b/arch/x86/math-emu/fpu_trig.c
diff --git a/arch/i386/math-emu/get_address.c b/arch/x86/math-emu/get_address.c
index 2e2c51a8bd3..2e2c51a8bd3 100644
--- a/arch/i386/math-emu/get_address.c
+++ b/arch/x86/math-emu/get_address.c
diff --git a/arch/i386/math-emu/load_store.c b/arch/x86/math-emu/load_store.c
index eebd6fb1c8a..eebd6fb1c8a 100644
--- a/arch/i386/math-emu/load_store.c
+++ b/arch/x86/math-emu/load_store.c
diff --git a/arch/i386/math-emu/mul_Xsig.S b/arch/x86/math-emu/mul_Xsig.S
index 717785a53eb..717785a53eb 100644
--- a/arch/i386/math-emu/mul_Xsig.S
+++ b/arch/x86/math-emu/mul_Xsig.S
diff --git a/arch/i386/math-emu/poly.h b/arch/x86/math-emu/poly.h
index 4db79811492..4db79811492 100644
--- a/arch/i386/math-emu/poly.h
+++ b/arch/x86/math-emu/poly.h
diff --git a/arch/i386/math-emu/poly_2xm1.c b/arch/x86/math-emu/poly_2xm1.c
index 9766ad5e974..9766ad5e974 100644
--- a/arch/i386/math-emu/poly_2xm1.c
+++ b/arch/x86/math-emu/poly_2xm1.c
diff --git a/arch/i386/math-emu/poly_atan.c b/arch/x86/math-emu/poly_atan.c
index 82f702952f6..82f702952f6 100644
--- a/arch/i386/math-emu/poly_atan.c
+++ b/arch/x86/math-emu/poly_atan.c
diff --git a/arch/i386/math-emu/poly_l2.c b/arch/x86/math-emu/poly_l2.c
index dd00e1d5b07..dd00e1d5b07 100644
--- a/arch/i386/math-emu/poly_l2.c
+++ b/arch/x86/math-emu/poly_l2.c
diff --git a/arch/i386/math-emu/poly_sin.c b/arch/x86/math-emu/poly_sin.c
index a36313fb06f..a36313fb06f 100644
--- a/arch/i386/math-emu/poly_sin.c
+++ b/arch/x86/math-emu/poly_sin.c
diff --git a/arch/i386/math-emu/poly_tan.c b/arch/x86/math-emu/poly_tan.c
index 8df3e03b6e6..8df3e03b6e6 100644
--- a/arch/i386/math-emu/poly_tan.c
+++ b/arch/x86/math-emu/poly_tan.c
diff --git a/arch/i386/math-emu/polynom_Xsig.S b/arch/x86/math-emu/polynom_Xsig.S
index 17315c89ff3..17315c89ff3 100644
--- a/arch/i386/math-emu/polynom_Xsig.S
+++ b/arch/x86/math-emu/polynom_Xsig.S
diff --git a/arch/i386/math-emu/reg_add_sub.c b/arch/x86/math-emu/reg_add_sub.c
index 7cd3b37ac08..7cd3b37ac08 100644
--- a/arch/i386/math-emu/reg_add_sub.c
+++ b/arch/x86/math-emu/reg_add_sub.c
diff --git a/arch/i386/math-emu/reg_compare.c b/arch/x86/math-emu/reg_compare.c
index f37c5b5a35a..f37c5b5a35a 100644
--- a/arch/i386/math-emu/reg_compare.c
+++ b/arch/x86/math-emu/reg_compare.c
diff --git a/arch/i386/math-emu/reg_constant.c b/arch/x86/math-emu/reg_constant.c
index a8501580196..a8501580196 100644
--- a/arch/i386/math-emu/reg_constant.c
+++ b/arch/x86/math-emu/reg_constant.c
diff --git a/arch/i386/math-emu/reg_constant.h b/arch/x86/math-emu/reg_constant.h
index 1bffaec3a13..1bffaec3a13 100644
--- a/arch/i386/math-emu/reg_constant.h
+++ b/arch/x86/math-emu/reg_constant.h
diff --git a/arch/i386/math-emu/reg_convert.c b/arch/x86/math-emu/reg_convert.c
index 45a25875270..45a25875270 100644
--- a/arch/i386/math-emu/reg_convert.c
+++ b/arch/x86/math-emu/reg_convert.c
diff --git a/arch/i386/math-emu/reg_divide.c b/arch/x86/math-emu/reg_divide.c
index 5cee7ff920d..5cee7ff920d 100644
--- a/arch/i386/math-emu/reg_divide.c
+++ b/arch/x86/math-emu/reg_divide.c
diff --git a/arch/i386/math-emu/reg_ld_str.c b/arch/x86/math-emu/reg_ld_str.c
index e976caef649..e976caef649 100644
--- a/arch/i386/math-emu/reg_ld_str.c
+++ b/arch/x86/math-emu/reg_ld_str.c
diff --git a/arch/i386/math-emu/reg_mul.c b/arch/x86/math-emu/reg_mul.c
index 40f50b61bc6..40f50b61bc6 100644
--- a/arch/i386/math-emu/reg_mul.c
+++ b/arch/x86/math-emu/reg_mul.c
diff --git a/arch/i386/math-emu/reg_norm.S b/arch/x86/math-emu/reg_norm.S
index 8b6352efcee..8b6352efcee 100644
--- a/arch/i386/math-emu/reg_norm.S
+++ b/arch/x86/math-emu/reg_norm.S
diff --git a/arch/i386/math-emu/reg_round.S b/arch/x86/math-emu/reg_round.S
index d1d4e48b4f6..d1d4e48b4f6 100644
--- a/arch/i386/math-emu/reg_round.S
+++ b/arch/x86/math-emu/reg_round.S
diff --git a/arch/i386/math-emu/reg_u_add.S b/arch/x86/math-emu/reg_u_add.S
index 47c4c2434d8..47c4c2434d8 100644
--- a/arch/i386/math-emu/reg_u_add.S
+++ b/arch/x86/math-emu/reg_u_add.S
diff --git a/arch/i386/math-emu/reg_u_div.S b/arch/x86/math-emu/reg_u_div.S
index cc00654b6f9..cc00654b6f9 100644
--- a/arch/i386/math-emu/reg_u_div.S
+++ b/arch/x86/math-emu/reg_u_div.S
diff --git a/arch/i386/math-emu/reg_u_mul.S b/arch/x86/math-emu/reg_u_mul.S
index 973f12af97d..973f12af97d 100644
--- a/arch/i386/math-emu/reg_u_mul.S
+++ b/arch/x86/math-emu/reg_u_mul.S
diff --git a/arch/i386/math-emu/reg_u_sub.S b/arch/x86/math-emu/reg_u_sub.S
index 1b6c24801d2..1b6c24801d2 100644
--- a/arch/i386/math-emu/reg_u_sub.S
+++ b/arch/x86/math-emu/reg_u_sub.S
diff --git a/arch/i386/math-emu/round_Xsig.S b/arch/x86/math-emu/round_Xsig.S
index bbe0e87718e..bbe0e87718e 100644
--- a/arch/i386/math-emu/round_Xsig.S
+++ b/arch/x86/math-emu/round_Xsig.S
diff --git a/arch/i386/math-emu/shr_Xsig.S b/arch/x86/math-emu/shr_Xsig.S
index 31cdd118e91..31cdd118e91 100644
--- a/arch/i386/math-emu/shr_Xsig.S
+++ b/arch/x86/math-emu/shr_Xsig.S
diff --git a/arch/i386/math-emu/status_w.h b/arch/x86/math-emu/status_w.h
index 59e73302aa6..59e73302aa6 100644
--- a/arch/i386/math-emu/status_w.h
+++ b/arch/x86/math-emu/status_w.h
diff --git a/arch/i386/math-emu/version.h b/arch/x86/math-emu/version.h
index a0d73a1d2b6..a0d73a1d2b6 100644
--- a/arch/i386/math-emu/version.h
+++ b/arch/x86/math-emu/version.h
diff --git a/arch/i386/math-emu/wm_shrx.S b/arch/x86/math-emu/wm_shrx.S
index 51842831798..51842831798 100644
--- a/arch/i386/math-emu/wm_shrx.S
+++ b/arch/x86/math-emu/wm_shrx.S
diff --git a/arch/i386/math-emu/wm_sqrt.S b/arch/x86/math-emu/wm_sqrt.S
index d258f59564e..d258f59564e 100644
--- a/arch/i386/math-emu/wm_sqrt.S
+++ b/arch/x86/math-emu/wm_sqrt.S
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
new file mode 100644
index 00000000000..98329109684
--- /dev/null
+++ b/arch/x86/mm/Makefile
@@ -0,0 +1,5 @@
+ifeq ($(CONFIG_X86_32),y)
+include ${srctree}/arch/x86/mm/Makefile_32
+else
+include ${srctree}/arch/x86/mm/Makefile_64
+endif
diff --git a/arch/x86/mm/Makefile_32 b/arch/x86/mm/Makefile_32
new file mode 100644
index 00000000000..362b4ad082d
--- /dev/null
+++ b/arch/x86/mm/Makefile_32
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux i386-specific parts of the memory manager.
+#
+
+obj-y := init_32.o pgtable_32.o fault_32.o ioremap_32.o extable_32.o pageattr_32.o mmap_32.o
+
+obj-$(CONFIG_NUMA) += discontig_32.o
+obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+obj-$(CONFIG_HIGHMEM) += highmem_32.o
+obj-$(CONFIG_BOOT_IOREMAP) += boot_ioremap_32.o
diff --git a/arch/x86/mm/Makefile_64 b/arch/x86/mm/Makefile_64
new file mode 100644
index 00000000000..6bcb47945b8
--- /dev/null
+++ b/arch/x86/mm/Makefile_64
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux x86_64-specific parts of the memory manager.
+#
+
+obj-y := init_64.o fault_64.o ioremap_64.o extable_64.o pageattr_64.o mmap_64.o
+obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+obj-$(CONFIG_NUMA) += numa_64.o
+obj-$(CONFIG_K8_NUMA) += k8topology_64.o
+obj-$(CONFIG_ACPI_NUMA) += srat_64.o
+
diff --git a/arch/i386/mm/boot_ioremap.c b/arch/x86/mm/boot_ioremap_32.c
index 4de95a17a7d..4de95a17a7d 100644
--- a/arch/i386/mm/boot_ioremap.c
+++ b/arch/x86/mm/boot_ioremap_32.c
diff --git a/arch/i386/mm/discontig.c b/arch/x86/mm/discontig_32.c
index 860e912a3fb..860e912a3fb 100644
--- a/arch/i386/mm/discontig.c
+++ b/arch/x86/mm/discontig_32.c
diff --git a/arch/i386/mm/extable.c b/arch/x86/mm/extable_32.c
index 0ce4f22a263..0ce4f22a263 100644
--- a/arch/i386/mm/extable.c
+++ b/arch/x86/mm/extable_32.c
diff --git a/arch/x86_64/mm/extable.c b/arch/x86/mm/extable_64.c
index 79ac6e7100a..79ac6e7100a 100644
--- a/arch/x86_64/mm/extable.c
+++ b/arch/x86/mm/extable_64.c
diff --git a/arch/i386/mm/fault.c b/arch/x86/mm/fault_32.c
index fcb38e7f354..fcb38e7f354 100644
--- a/arch/i386/mm/fault.c
+++ b/arch/x86/mm/fault_32.c
diff --git a/arch/x86_64/mm/fault.c b/arch/x86/mm/fault_64.c
index 54816adb8e9..54816adb8e9 100644
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86/mm/fault_64.c
diff --git a/arch/i386/mm/highmem.c b/arch/x86/mm/highmem_32.c
index 1c3bf95f735..1c3bf95f735 100644
--- a/arch/i386/mm/highmem.c
+++ b/arch/x86/mm/highmem_32.c
diff --git a/arch/i386/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 6c06d9c0488..6c06d9c0488 100644
--- a/arch/i386/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
diff --git a/arch/i386/mm/init.c b/arch/x86/mm/init_32.c
index 730a5b177b1..730a5b177b1 100644
--- a/arch/i386/mm/init.c
+++ b/arch/x86/mm/init_32.c
diff --git a/arch/x86_64/mm/init.c b/arch/x86/mm/init_64.c
index 458893b376f..458893b376f 100644
--- a/arch/x86_64/mm/init.c
+++ b/arch/x86/mm/init_64.c
diff --git a/arch/i386/mm/ioremap.c b/arch/x86/mm/ioremap_32.c
index 0b278315d73..0b278315d73 100644
--- a/arch/i386/mm/ioremap.c
+++ b/arch/x86/mm/ioremap_32.c
diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86/mm/ioremap_64.c
index 6cac90aa503..6cac90aa503 100644
--- a/arch/x86_64/mm/ioremap.c
+++ b/arch/x86/mm/ioremap_64.c
diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86/mm/k8topology_64.c
index a96006f7ae0..a96006f7ae0 100644
--- a/arch/x86_64/mm/k8topology.c
+++ b/arch/x86/mm/k8topology_64.c
diff --git a/arch/i386/mm/mmap.c b/arch/x86/mm/mmap_32.c
index 552e0847375..552e0847375 100644
--- a/arch/i386/mm/mmap.c
+++ b/arch/x86/mm/mmap_32.c
diff --git a/arch/x86_64/mm/mmap.c b/arch/x86/mm/mmap_64.c
index 80bba0dc000..80bba0dc000 100644
--- a/arch/x86_64/mm/mmap.c
+++ b/arch/x86/mm/mmap_64.c
diff --git a/arch/x86_64/mm/numa.c b/arch/x86/mm/numa_64.c
index 6da23552226..6da23552226 100644
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86/mm/numa_64.c
diff --git a/arch/i386/mm/pageattr.c b/arch/x86/mm/pageattr_32.c
index 4241a74d16c..4241a74d16c 100644
--- a/arch/i386/mm/pageattr.c
+++ b/arch/x86/mm/pageattr_32.c
diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86/mm/pageattr_64.c
index 10b9809ce82..10b9809ce82 100644
--- a/arch/x86_64/mm/pageattr.c
+++ b/arch/x86/mm/pageattr_64.c
diff --git a/arch/i386/mm/pgtable.c b/arch/x86/mm/pgtable_32.c
index 01437c46baa..01437c46baa 100644
--- a/arch/i386/mm/pgtable.c
+++ b/arch/x86/mm/pgtable_32.c
diff --git a/arch/x86_64/mm/srat.c b/arch/x86/mm/srat_64.c
index acdf03e1914..acdf03e1914 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86/mm/srat_64.c
diff --git a/arch/i386/oprofile/Kconfig b/arch/x86/oprofile/Kconfig
index d8a84088471..d8a84088471 100644
--- a/arch/i386/oprofile/Kconfig
+++ b/arch/x86/oprofile/Kconfig
diff --git a/arch/i386/oprofile/Makefile b/arch/x86/oprofile/Makefile
index 30f3eb36666..30f3eb36666 100644
--- a/arch/i386/oprofile/Makefile
+++ b/arch/x86/oprofile/Makefile
diff --git a/arch/i386/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index c049ce414f0..c049ce414f0 100644
--- a/arch/i386/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
diff --git a/arch/i386/oprofile/init.c b/arch/x86/oprofile/init.c
index 5341d481d92..5341d481d92 100644
--- a/arch/i386/oprofile/init.c
+++ b/arch/x86/oprofile/init.c
diff --git a/arch/i386/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 11b7a51566a..11b7a51566a 100644
--- a/arch/i386/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
diff --git a/arch/i386/oprofile/nmi_timer_int.c b/arch/x86/oprofile/nmi_timer_int.c
index 1418e36ae7a..1418e36ae7a 100644
--- a/arch/i386/oprofile/nmi_timer_int.c
+++ b/arch/x86/oprofile/nmi_timer_int.c
diff --git a/arch/i386/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h
index 2880b15c467..2880b15c467 100644
--- a/arch/i386/oprofile/op_counter.h
+++ b/arch/x86/oprofile/op_counter.h
diff --git a/arch/i386/oprofile/op_model_athlon.c b/arch/x86/oprofile/op_model_athlon.c
index 3057a19e464..3057a19e464 100644
--- a/arch/i386/oprofile/op_model_athlon.c
+++ b/arch/x86/oprofile/op_model_athlon.c
diff --git a/arch/i386/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 47925927b12..47925927b12 100644
--- a/arch/i386/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
diff --git a/arch/i386/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index c554f52cb80..c554f52cb80 100644
--- a/arch/i386/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
diff --git a/arch/i386/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index abb1aa95b97..abb1aa95b97 100644
--- a/arch/i386/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
new file mode 100644
index 00000000000..c5c8e485fc4
--- /dev/null
+++ b/arch/x86/pci/Makefile
@@ -0,0 +1,5 @@
+ifeq ($(CONFIG_X86_32),y)
+include ${srctree}/arch/x86/pci/Makefile_32
+else
+include ${srctree}/arch/x86/pci/Makefile_64
+endif
diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32
new file mode 100644
index 00000000000..cdd6828b5ab
--- /dev/null
+++ b/arch/x86/pci/Makefile_32
@@ -0,0 +1,14 @@
+obj-y := i386.o init.o
+
+obj-$(CONFIG_PCI_BIOS) += pcbios.o
+obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_32.o direct.o mmconfig-shared.o
+obj-$(CONFIG_PCI_DIRECT) += direct.o
+
+pci-y := fixup.o
+pci-$(CONFIG_ACPI) += acpi.o
+pci-y += legacy.o irq.o
+
+pci-$(CONFIG_X86_VISWS) := visws.o fixup.o
+pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o
+
+obj-y += $(pci-y) common.o early.o
diff --git a/arch/x86/pci/Makefile_64 b/arch/x86/pci/Makefile_64
new file mode 100644
index 00000000000..7d8c467bf14
--- /dev/null
+++ b/arch/x86/pci/Makefile_64
@@ -0,0 +1,17 @@
+#
+# Makefile for X86_64 specific PCI routines
+#
+# Reuse the i386 PCI subsystem
+#
+EXTRA_CFLAGS += -Iarch/x86/pci
+
+obj-y := i386.o
+obj-$(CONFIG_PCI_DIRECT)+= direct.o
+obj-y += fixup.o init.o
+obj-$(CONFIG_ACPI) += acpi.o
+obj-y += legacy.o irq.o common.o early.o
+# mmconfig has a 64bit special
+obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o
+
+obj-$(CONFIG_NUMA) += k8-bus_64.o
+
diff --git a/arch/i386/pci/acpi.c b/arch/x86/pci/acpi.c
index bc8a44bddaa..bc8a44bddaa 100644
--- a/arch/i386/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
diff --git a/arch/i386/pci/common.c b/arch/x86/pci/common.c
index ebc6f3c6634..ebc6f3c6634 100644
--- a/arch/i386/pci/common.c
+++ b/arch/x86/pci/common.c
diff --git a/arch/i386/pci/direct.c b/arch/x86/pci/direct.c
index 431c9a51b15..431c9a51b15 100644
--- a/arch/i386/pci/direct.c
+++ b/arch/x86/pci/direct.c
diff --git a/arch/i386/pci/early.c b/arch/x86/pci/early.c
index 42df4b6606d..42df4b6606d 100644
--- a/arch/i386/pci/early.c
+++ b/arch/x86/pci/early.c
diff --git a/arch/i386/pci/fixup.c b/arch/x86/pci/fixup.c
index c82cbf4c722..c82cbf4c722 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
diff --git a/arch/i386/pci/i386.c b/arch/x86/pci/i386.c
index bcd2f94b732..bcd2f94b732 100644
--- a/arch/i386/pci/i386.c
+++ b/arch/x86/pci/i386.c
diff --git a/arch/i386/pci/init.c b/arch/x86/pci/init.c
index 3de9f9ba2da..3de9f9ba2da 100644
--- a/arch/i386/pci/init.c
+++ b/arch/x86/pci/init.c
diff --git a/arch/i386/pci/irq.c b/arch/x86/pci/irq.c
index 8434f2323b8..8434f2323b8 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/x86/pci/irq.c
diff --git a/arch/x86_64/pci/k8-bus.c b/arch/x86/pci/k8-bus_64.c
index 9cc813e2970..9cc813e2970 100644
--- a/arch/x86_64/pci/k8-bus.c
+++ b/arch/x86/pci/k8-bus_64.c
diff --git a/arch/i386/pci/legacy.c b/arch/x86/pci/legacy.c
index 5565d7016b7..5565d7016b7 100644
--- a/arch/i386/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 4df637e34f8..4df637e34f8 100644
--- a/arch/i386/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
diff --git a/arch/i386/pci/mmconfig.c b/arch/x86/pci/mmconfig_32.c
index 1bf5816d34c..1bf5816d34c 100644
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/x86/pci/mmconfig_32.c
diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86/pci/mmconfig_64.c
index 4095e4d66a1..4095e4d66a1 100644
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86/pci/mmconfig_64.c
diff --git a/arch/i386/pci/numa.c b/arch/x86/pci/numa.c
index f5f165f69e0..f5f165f69e0 100644
--- a/arch/i386/pci/numa.c
+++ b/arch/x86/pci/numa.c
diff --git a/arch/i386/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 10ac8c316c4..10ac8c316c4 100644
--- a/arch/i386/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
diff --git a/arch/i386/pci/pci.h b/arch/x86/pci/pci.h
index 8c66f275756..8c66f275756 100644
--- a/arch/i386/pci/pci.h
+++ b/arch/x86/pci/pci.h
diff --git a/arch/i386/pci/visws.c b/arch/x86/pci/visws.c
index 8ecb1c72259..8ecb1c72259 100644
--- a/arch/i386/pci/visws.c
+++ b/arch/x86/pci/visws.c
diff --git a/arch/i386/power/Makefile b/arch/x86/power/Makefile
index d764ec95006..d764ec95006 100644
--- a/arch/i386/power/Makefile
+++ b/arch/x86/power/Makefile
diff --git a/arch/i386/power/cpu.c b/arch/x86/power/cpu.c
index 998fd3ec0d6..998fd3ec0d6 100644
--- a/arch/i386/power/cpu.c
+++ b/arch/x86/power/cpu.c
diff --git a/arch/i386/power/suspend.c b/arch/x86/power/suspend.c
index a0020b913f3..a0020b913f3 100644
--- a/arch/i386/power/suspend.c
+++ b/arch/x86/power/suspend.c
diff --git a/arch/i386/power/swsusp.S b/arch/x86/power/swsusp.S
index 53662e05b39..53662e05b39 100644
--- a/arch/i386/power/swsusp.S
+++ b/arch/x86/power/swsusp.S
diff --git a/arch/x86_64/vdso/.gitignore b/arch/x86/vdso/.gitignore
index f8b69d84238..f8b69d84238 100644
--- a/arch/x86_64/vdso/.gitignore
+++ b/arch/x86/vdso/.gitignore
diff --git a/arch/x86_64/vdso/Makefile b/arch/x86/vdso/Makefile
index 8d03de029d9..8d03de029d9 100644
--- a/arch/x86_64/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
diff --git a/arch/x86_64/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index 5b54cdfb2b0..5b54cdfb2b0 100644
--- a/arch/x86_64/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
diff --git a/arch/x86_64/vdso/vdso-note.S b/arch/x86/vdso/vdso-note.S
index 79a071e4357..79a071e4357 100644
--- a/arch/x86_64/vdso/vdso-note.S
+++ b/arch/x86/vdso/vdso-note.S
diff --git a/arch/x86_64/vdso/vdso-start.S b/arch/x86/vdso/vdso-start.S
index 2dc2cdb84d6..2dc2cdb84d6 100644
--- a/arch/x86_64/vdso/vdso-start.S
+++ b/arch/x86/vdso/vdso-start.S
diff --git a/arch/x86/vdso/vdso.S b/arch/x86/vdso/vdso.S
new file mode 100644
index 00000000000..4b1620a1529
--- /dev/null
+++ b/arch/x86/vdso/vdso.S
@@ -0,0 +1,2 @@
+ .section ".vdso","a"
+ .incbin "arch/x86/vdso/vdso.so"
diff --git a/arch/x86_64/vdso/vdso.lds.S b/arch/x86/vdso/vdso.lds.S
index b9a60e665d0..b9a60e665d0 100644
--- a/arch/x86_64/vdso/vdso.lds.S
+++ b/arch/x86/vdso/vdso.lds.S
diff --git a/arch/x86_64/vdso/vextern.h b/arch/x86/vdso/vextern.h
index 1683ba2ae3e..1683ba2ae3e 100644
--- a/arch/x86_64/vdso/vextern.h
+++ b/arch/x86/vdso/vextern.h
diff --git a/arch/x86_64/vdso/vgetcpu.c b/arch/x86/vdso/vgetcpu.c
index 91f6e85d0fc..91f6e85d0fc 100644
--- a/arch/x86_64/vdso/vgetcpu.c
+++ b/arch/x86/vdso/vgetcpu.c
diff --git a/arch/x86_64/vdso/vma.c b/arch/x86/vdso/vma.c
index ff9333e5fb0..ff9333e5fb0 100644
--- a/arch/x86_64/vdso/vma.c
+++ b/arch/x86/vdso/vma.c
diff --git a/arch/x86_64/vdso/voffset.h b/arch/x86/vdso/voffset.h
index 4af67c79085..4af67c79085 100644
--- a/arch/x86_64/vdso/voffset.h
+++ b/arch/x86/vdso/voffset.h
diff --git a/arch/x86_64/vdso/vvar.c b/arch/x86/vdso/vvar.c
index 6fc22219a47..6fc22219a47 100644
--- a/arch/x86_64/vdso/vvar.c
+++ b/arch/x86/vdso/vvar.c
diff --git a/arch/i386/video/Makefile b/arch/x86/video/Makefile
index 2c447c94adc..2c447c94adc 100644
--- a/arch/i386/video/Makefile
+++ b/arch/x86/video/Makefile
diff --git a/arch/i386/video/fbdev.c b/arch/x86/video/fbdev.c
index 48fb38d7d2c..48fb38d7d2c 100644
--- a/arch/i386/video/fbdev.c
+++ b/arch/x86/video/fbdev.c
diff --git a/arch/i386/xen/Kconfig b/arch/x86/xen/Kconfig
index 9df99e1885a..9df99e1885a 100644
--- a/arch/i386/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
diff --git a/arch/i386/xen/Makefile b/arch/x86/xen/Makefile
index 343df246bd3..343df246bd3 100644
--- a/arch/i386/xen/Makefile
+++ b/arch/x86/xen/Makefile
diff --git a/arch/i386/xen/enlighten.c b/arch/x86/xen/enlighten.c
index f01bfcd4bde..f01bfcd4bde 100644
--- a/arch/i386/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
diff --git a/arch/i386/xen/events.c b/arch/x86/xen/events.c
index da1b173547a..da1b173547a 100644
--- a/arch/i386/xen/events.c
+++ b/arch/x86/xen/events.c
diff --git a/arch/i386/xen/features.c b/arch/x86/xen/features.c
index 0707714e40d..0707714e40d 100644
--- a/arch/i386/xen/features.c
+++ b/arch/x86/xen/features.c
diff --git a/arch/i386/xen/manage.c b/arch/x86/xen/manage.c
index aa7af9e6abc..aa7af9e6abc 100644
--- a/arch/i386/xen/manage.c
+++ b/arch/x86/xen/manage.c
diff --git a/arch/i386/xen/mmu.c b/arch/x86/xen/mmu.c
index 874db0cd1d2..874db0cd1d2 100644
--- a/arch/i386/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
diff --git a/arch/i386/xen/mmu.h b/arch/x86/xen/mmu.h
index c9ff27f3ac3..c9ff27f3ac3 100644
--- a/arch/i386/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
diff --git a/arch/i386/xen/multicalls.c b/arch/x86/xen/multicalls.c
index c837e8e463d..c837e8e463d 100644
--- a/arch/i386/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
diff --git a/arch/i386/xen/multicalls.h b/arch/x86/xen/multicalls.h
index e6f7530b156..e6f7530b156 100644
--- a/arch/i386/xen/multicalls.h
+++ b/arch/x86/xen/multicalls.h
diff --git a/arch/i386/xen/setup.c b/arch/x86/xen/setup.c
index f84e7722664..f84e7722664 100644
--- a/arch/i386/xen/setup.c
+++ b/arch/x86/xen/setup.c
diff --git a/arch/i386/xen/smp.c b/arch/x86/xen/smp.c
index 557b8e24706..557b8e24706 100644
--- a/arch/i386/xen/smp.c
+++ b/arch/x86/xen/smp.c
diff --git a/arch/i386/xen/time.c b/arch/x86/xen/time.c
index dfd6db69ead..dfd6db69ead 100644
--- a/arch/i386/xen/time.c
+++ b/arch/x86/xen/time.c
diff --git a/arch/i386/xen/vdso.h b/arch/x86/xen/vdso.h
index 861fedfe523..861fedfe523 100644
--- a/arch/i386/xen/vdso.h
+++ b/arch/x86/xen/vdso.h
diff --git a/arch/i386/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index 1a43b60c0c6..1a43b60c0c6 100644
--- a/arch/i386/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
diff --git a/arch/i386/xen/xen-head.S b/arch/x86/xen/xen-head.S
index f8d6937db2e..f8d6937db2e 100644
--- a/arch/i386/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
diff --git a/arch/i386/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index b9aaea45f07..b9aaea45f07 100644
--- a/arch/i386/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index b4d9089a6a0..b1b98e614f7 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -704,7 +704,7 @@ source kernel/power/Kconfig
source "drivers/acpi/Kconfig"
-source "arch/x86_64/kernel/cpufreq/Kconfig"
+source "arch/x86/kernel/cpufreq/Kconfig"
endmenu
@@ -778,7 +778,7 @@ source fs/Kconfig
menu "Instrumentation Support"
depends on EXPERIMENTAL
-source "arch/x86_64/oprofile/Kconfig"
+source "arch/x86/oprofile/Kconfig"
config KPROBES
bool "Kprobes"
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index b024e4a8689..8bffb94c71b 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -21,6 +21,9 @@
#
# $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
+# Fill in SRCARCH
+SRCARCH := x86
+
LDFLAGS := -m elf_x86_64
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
LDFLAGS_vmlinux :=
@@ -71,18 +74,18 @@ CFLAGS += $(cflags-y)
CFLAGS_KERNEL += $(cflags-kernel-y)
AFLAGS += -m64
-head-y := arch/x86_64/kernel/head.o arch/x86_64/kernel/head64.o arch/x86_64/kernel/init_task.o
+head-y := arch/x86/kernel/head_64.o arch/x86/kernel/head64.o arch/x86/kernel/init_task_64.o
-libs-y += arch/x86_64/lib/
-core-y += arch/x86_64/kernel/ \
- arch/x86_64/mm/ \
- arch/x86_64/crypto/ \
- arch/x86_64/vdso/
-core-$(CONFIG_IA32_EMULATION) += arch/x86_64/ia32/
-drivers-$(CONFIG_PCI) += arch/x86_64/pci/
-drivers-$(CONFIG_OPROFILE) += arch/x86_64/oprofile/
+libs-y += arch/x86/lib/
+core-y += arch/x86/kernel/ \
+ arch/x86/mm/ \
+ arch/x86/crypto/ \
+ arch/x86/vdso/
+core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
+drivers-$(CONFIG_PCI) += arch/x86/pci/
+drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
-boot := arch/x86_64/boot
+boot := arch/x86/boot
PHONY += bzImage bzlilo install archmrproper \
fdimage fdimage144 fdimage288 isoimage archclean
@@ -90,10 +93,12 @@ PHONY += bzImage bzlilo install archmrproper \
#Default target when executing "make"
all: bzImage
-BOOTIMAGE := arch/x86_64/boot/bzImage
+BOOTIMAGE := arch/x86/boot/bzImage
KBUILD_IMAGE := $(BOOTIMAGE)
bzImage: vmlinux
+ $(Q)mkdir -p $(objtree)/arch/x86_64/boot
+ $(Q)ln -fsn $(objtree)/arch/x86/boot/bzImage $(objtree)/arch/x86_64/boot/bzImage
$(Q)$(MAKE) $(build)=$(boot) $(BOOTIMAGE)
bzlilo: vmlinux
@@ -109,6 +114,7 @@ install:
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
archclean:
+ $(Q)rm -rf $(objtree)/arch/x86_64/boot
$(Q)$(MAKE) $(clean)=$(boot)
define archhelp
diff --git a/arch/x86_64/boot/.gitignore b/arch/x86_64/boot/.gitignore
deleted file mode 100644
index 18465143cfa..00000000000
--- a/arch/x86_64/boot/.gitignore
+++ /dev/null
@@ -1,5 +0,0 @@
-bootsect
-bzImage
-setup
-setup.bin
-setup.elf
diff --git a/arch/x86_64/boot/Makefile b/arch/x86_64/boot/Makefile
deleted file mode 100644
index 67096389de1..00000000000
--- a/arch/x86_64/boot/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# arch/x86_64/boot/Makefile
-#
-# The actual boot code is shared with i386 including the Makefile.
-# So tell kbuild that we fetch the code from i386 and include the
-# Makefile from i386 too.
-
-src := arch/i386/boot
-include $(src)/Makefile
diff --git a/arch/x86_64/boot/compressed/Makefile b/arch/x86_64/boot/compressed/Makefile
deleted file mode 100644
index 877c0bdbbc6..00000000000
--- a/arch/x86_64/boot/compressed/Makefile
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# linux/arch/x86_64/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
-
-CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2 \
- -fno-strict-aliasing -fPIC -mcmodel=small \
- $(call cc-option, -ffreestanding) \
- $(call cc-option, -fno-stack-protector)
-AFLAGS := $(CFLAGS) -D__ASSEMBLY__
-LDFLAGS := -m elf_x86_64
-
-LDFLAGS_vmlinux := -T
-$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
- $(call if_changed,ld)
- @:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
- $(call if_changed,ld)
diff --git a/arch/x86_64/boot/compressed/head.S b/arch/x86_64/boot/compressed/head.S
deleted file mode 100644
index 9fd8030cc54..00000000000
--- a/arch/x86_64/boot/compressed/head.S
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- * linux/boot/head.S
- *
- * Copyright (C) 1991, 1992, 1993 Linus Torvalds
- */
-
-/*
- * head.S contains the 32-bit startup code.
- *
- * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
- * the page directory will exist. The startup code will be overwritten by
- * the page directory. [According to comments etc elsewhere on a compressed
- * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
- *
- * Page 0 is deliberately kept safe, since System Management Mode code in
- * laptops may need to access the BIOS data stored there. This is also
- * useful for future device drivers that either access the BIOS via VM86
- * mode.
- */
-
-/*
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- */
-.code32
-.text
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/msr.h>
-
-.section ".text.head"
- .code32
- .globl startup_32
-
-startup_32:
- cld
- cli
- movl $(__KERNEL_DS), %eax
- movl %eax, %ds
- movl %eax, %es
- movl %eax, %ss
-
-/* Calculate the delta between where we were compiled to run
- * at and where we were actually loaded at. This can only be done
- * with a short local call on x86. Nothing else will tell us what
- * address we are running at. The reserved chunk of the real-mode
- * data at 0x1e4 (defined as a scratch field) are used as the stack
- * for this calculation. Only 4 bytes are needed.
- */
- leal (0x1e4+4)(%esi), %esp
- call 1f
-1: popl %ebp
- subl $1b, %ebp
-
-/* setup a stack and make sure cpu supports long mode. */
- movl $user_stack_end, %eax
- addl %ebp, %eax
- movl %eax, %esp
-
- call verify_cpu
- testl %eax, %eax
- jnz no_longmode
-
-/* Compute the delta between where we were compiled to run at
- * and where the code will actually run at.
- */
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
- * contains the address where we should move the kernel image temporarily
- * for safe in-place decompression.
- */
-
-#ifdef CONFIG_RELOCATABLE
- movl %ebp, %ebx
- addl $(LARGE_PAGE_SIZE -1), %ebx
- andl $LARGE_PAGE_MASK, %ebx
-#else
- movl $CONFIG_PHYSICAL_START, %ebx
-#endif
-
- /* Replace the compressed data size with the uncompressed size */
- subl input_len(%ebp), %ebx
- movl output_len(%ebp), %eax
- addl %eax, %ebx
- /* Add 8 bytes for every 32K input block */
- shrl $12, %eax
- addl %eax, %ebx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addl $(32768 + 18 + 4095), %ebx
- andl $~4095, %ebx
-
-/*
- * Prepare for entering 64 bit mode
- */
-
- /* Load new GDT with the 64bit segments using 32bit descriptor */
- leal gdt(%ebp), %eax
- movl %eax, gdt+2(%ebp)
- lgdt gdt(%ebp)
-
- /* Enable PAE mode */
- xorl %eax, %eax
- orl $(1 << 5), %eax
- movl %eax, %cr4
-
- /*
- * Build early 4G boot pagetable
- */
- /* Initialize Page tables to 0*/
- leal pgtable(%ebx), %edi
- xorl %eax, %eax
- movl $((4096*6)/4), %ecx
- rep stosl
-
- /* Build Level 4 */
- leal pgtable + 0(%ebx), %edi
- leal 0x1007 (%edi), %eax
- movl %eax, 0(%edi)
-
- /* Build Level 3 */
- leal pgtable + 0x1000(%ebx), %edi
- leal 0x1007(%edi), %eax
- movl $4, %ecx
-1: movl %eax, 0x00(%edi)
- addl $0x00001000, %eax
- addl $8, %edi
- decl %ecx
- jnz 1b
-
- /* Build Level 2 */
- leal pgtable + 0x2000(%ebx), %edi
- movl $0x00000183, %eax
- movl $2048, %ecx
-1: movl %eax, 0(%edi)
- addl $0x00200000, %eax
- addl $8, %edi
- decl %ecx
- jnz 1b
-
- /* Enable the boot page tables */
- leal pgtable(%ebx), %eax
- movl %eax, %cr3
-
- /* Enable Long mode in EFER (Extended Feature Enable Register) */
- movl $MSR_EFER, %ecx
- rdmsr
- btsl $_EFER_LME, %eax
- wrmsr
-
- /* Setup for the jump to 64bit mode
- *
- * When the jump is performend we will be in long mode but
- * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
- * (and in turn EFER.LMA = 1). To jump into 64bit mode we use
- * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
- * We place all of the values on our mini stack so lret can
- * used to perform that far jump.
- */
- pushl $__KERNEL_CS
- leal startup_64(%ebp), %eax
- pushl %eax
-
- /* Enter paged protected Mode, activating Long Mode */
- movl $0x80000001, %eax /* Enable Paging and Protected mode */
- movl %eax, %cr0
-
- /* Jump from 32bit compatibility mode into 64bit mode. */
- lret
-
-no_longmode:
- /* This isn't an x86-64 CPU so hang */
-1:
- hlt
- jmp 1b
-
-#include "../../kernel/verify_cpu.S"
-
- /* Be careful here startup_64 needs to be at a predictable
- * address so I can export it in an ELF header. Bootloaders
- * should look at the ELF header to find this address, as
- * it may change in the future.
- */
- .code64
- .org 0x200
-ENTRY(startup_64)
- /* We come here either from startup_32 or directly from a
- * 64bit bootloader. If we come here from a bootloader we depend on
- * an identity mapped page table being provied that maps our
- * entire text+data+bss and hopefully all of memory.
- */
-
- /* Setup data segments. */
- xorl %eax, %eax
- movl %eax, %ds
- movl %eax, %es
- movl %eax, %ss
- movl %eax, %fs
- movl %eax, %gs
- lldt %ax
- movl $0x20, %eax
- ltr %ax
-
- /* Compute the decompressed kernel start address. It is where
- * we were loaded at aligned to a 2M boundary. %rbp contains the
- * decompressed kernel start address.
- *
- * If it is a relocatable kernel then decompress and run the kernel
- * from load address aligned to 2MB addr, otherwise decompress and
- * run the kernel from CONFIG_PHYSICAL_START
- */
-
- /* Start with the delta to where the kernel will run at. */
-#ifdef CONFIG_RELOCATABLE
- leaq startup_32(%rip) /* - $startup_32 */, %rbp
- addq $(LARGE_PAGE_SIZE - 1), %rbp
- andq $LARGE_PAGE_MASK, %rbp
- movq %rbp, %rbx
-#else
- movq $CONFIG_PHYSICAL_START, %rbp
- movq %rbp, %rbx
-#endif
-
- /* Replace the compressed data size with the uncompressed size */
- movl input_len(%rip), %eax
- subq %rax, %rbx
- movl output_len(%rip), %eax
- addq %rax, %rbx
- /* Add 8 bytes for every 32K input block */
- shrq $12, %rax
- addq %rax, %rbx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addq $(32768 + 18 + 4095), %rbx
- andq $~4095, %rbx
-
-/* Copy the compressed kernel to the end of our buffer
- * where decompression in place becomes safe.
- */
- leaq _end(%rip), %r8
- leaq _end(%rbx), %r9
- movq $_end /* - $startup_32 */, %rcx
-1: subq $8, %r8
- subq $8, %r9
- movq 0(%r8), %rax
- movq %rax, 0(%r9)
- subq $8, %rcx
- jnz 1b
-
-/*
- * Jump to the relocated address.
- */
- leaq relocated(%rbx), %rax
- jmp *%rax
-
-.section ".text"
-relocated:
-
-/*
- * Clear BSS
- */
- xorq %rax, %rax
- leaq _edata(%rbx), %rdi
- leaq _end(%rbx), %rcx
- subq %rdi, %rcx
- cld
- rep
- stosb
-
- /* Setup the stack */
- leaq user_stack_end(%rip), %rsp
-
- /* zero EFLAGS after setting rsp */
- pushq $0
- popfq
-
-/*
- * Do the decompression, and jump to the new kernel..
- */
- pushq %rsi # Save the real mode argument
- movq %rsi, %rdi # real mode address
- leaq _heap(%rip), %rsi # _heap
- leaq input_data(%rip), %rdx # input_data
- movl input_len(%rip), %eax
- movq %rax, %rcx # input_len
- movq %rbp, %r8 # output
- call decompress_kernel
- popq %rsi
-
-
-/*
- * Jump to the decompressed kernel.
- */
- jmp *%rbp
-
- .data
-gdt:
- .word gdt_end - gdt
- .long gdt
- .word 0
- .quad 0x0000000000000000 /* NULL descriptor */
- .quad 0x00af9a000000ffff /* __KERNEL_CS */
- .quad 0x00cf92000000ffff /* __KERNEL_DS */
- .quad 0x0080890000000000 /* TS descriptor */
- .quad 0x0000000000000000 /* TS continued */
-gdt_end:
- .bss
-/* Stack for uncompression */
- .balign 4
-user_stack:
- .fill 4096,4,0
-user_stack_end:
diff --git a/arch/x86_64/boot/tools/.gitignore b/arch/x86_64/boot/tools/.gitignore
deleted file mode 100644
index 378eac25d31..00000000000
--- a/arch/x86_64/boot/tools/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-build
diff --git a/arch/x86_64/crypto/Makefile b/arch/x86_64/crypto/Makefile
deleted file mode 100644
index 15b538a8b7f..00000000000
--- a/arch/x86_64/crypto/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# x86_64/crypto/Makefile
-#
-# Arch-specific CryptoAPI modules.
-#
-
-obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o
-obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o
-
-aes-x86_64-y := aes-x86_64-asm.o aes.o
-twofish-x86_64-y := twofish-x86_64-asm.o twofish.o
-
diff --git a/arch/x86_64/ia32/audit.c b/arch/x86_64/ia32/audit.c
deleted file mode 100644
index 8850fe40ea3..00000000000
--- a/arch/x86_64/ia32/audit.c
+++ /dev/null
@@ -1,42 +0,0 @@
-#include <asm-i386/unistd.h>
-
-unsigned ia32_dir_class[] = {
-#include <asm-generic/audit_dir_write.h>
-~0U
-};
-
-unsigned ia32_chattr_class[] = {
-#include <asm-generic/audit_change_attr.h>
-~0U
-};
-
-unsigned ia32_write_class[] = {
-#include <asm-generic/audit_write.h>
-~0U
-};
-
-unsigned ia32_read_class[] = {
-#include <asm-generic/audit_read.h>
-~0U
-};
-
-unsigned ia32_signal_class[] = {
-#include <asm-generic/audit_signal.h>
-~0U
-};
-
-int ia32_classify_syscall(unsigned syscall)
-{
- switch(syscall) {
- case __NR_open:
- return 2;
- case __NR_openat:
- return 3;
- case __NR_socketcall:
- return 4;
- case __NR_execve:
- return 5;
- default:
- return 1;
- }
-}
diff --git a/arch/x86_64/ia32/ipc32.c b/arch/x86_64/ia32/ipc32.c
deleted file mode 100644
index 369151dc321..00000000000
--- a/arch/x86_64/ia32/ipc32.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/syscalls.h>
-#include <linux/time.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/ipc.h>
-#include <linux/compat.h>
-
-#include <asm-i386/ipc.h>
-
-asmlinkage long
-sys32_ipc(u32 call, int first, int second, int third,
- compat_uptr_t ptr, u32 fifth)
-{
- int version;
-
- version = call >> 16; /* hack for backward compatibility */
- call &= 0xffff;
-
- switch (call) {
- case SEMOP:
- /* struct sembuf is the same on 32 and 64bit :)) */
- return sys_semtimedop(first, compat_ptr(ptr), second, NULL);
- case SEMTIMEDOP:
- return compat_sys_semtimedop(first, compat_ptr(ptr), second,
- compat_ptr(fifth));
- case SEMGET:
- return sys_semget(first, second, third);
- case SEMCTL:
- return compat_sys_semctl(first, second, third, compat_ptr(ptr));
-
- case MSGSND:
- return compat_sys_msgsnd(first, second, third, compat_ptr(ptr));
- case MSGRCV:
- return compat_sys_msgrcv(first, second, fifth, third,
- version, compat_ptr(ptr));
- case MSGGET:
- return sys_msgget((key_t) first, second);
- case MSGCTL:
- return compat_sys_msgctl(first, second, compat_ptr(ptr));
-
- case SHMAT:
- return compat_sys_shmat(first, second, third, version,
- compat_ptr(ptr));
- break;
- case SHMDT:
- return sys_shmdt(compat_ptr(ptr));
- case SHMGET:
- return sys_shmget(first, (unsigned)second, third);
- case SHMCTL:
- return compat_sys_shmctl(first, second, compat_ptr(ptr));
- }
- return -ENOSYS;
-}
diff --git a/arch/x86_64/ia32/syscall32_syscall.S b/arch/x86_64/ia32/syscall32_syscall.S
deleted file mode 100644
index 8f8271bdf13..00000000000
--- a/arch/x86_64/ia32/syscall32_syscall.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/* 32bit VDSOs mapped into user space. */
-
- .section ".init.data","aw"
-
- .globl syscall32_syscall
- .globl syscall32_syscall_end
-
-syscall32_syscall:
- .incbin "arch/x86_64/ia32/vsyscall-syscall.so"
-syscall32_syscall_end:
-
- .globl syscall32_sysenter
- .globl syscall32_sysenter_end
-
-syscall32_sysenter:
- .incbin "arch/x86_64/ia32/vsyscall-sysenter.so"
-syscall32_sysenter_end:
diff --git a/arch/x86_64/ia32/vsyscall-sigreturn.S b/arch/x86_64/ia32/vsyscall-sigreturn.S
deleted file mode 100644
index 1384367cdbe..00000000000
--- a/arch/x86_64/ia32/vsyscall-sigreturn.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Common code for the sigreturn entry points on the vsyscall page.
- * This code uses SYSCALL_ENTER_KERNEL (either syscall or int $0x80)
- * to enter the kernel.
- * This file is #include'd by vsyscall-*.S to define them after the
- * vsyscall entry point. The addresses we get for these entry points
- * by doing ".balign 32" must match in both versions of the page.
- */
-
- .code32
- .section .text.sigreturn,"ax"
- .balign 32
- .globl __kernel_sigreturn
- .type __kernel_sigreturn,@function
-__kernel_sigreturn:
-.LSTART_sigreturn:
- popl %eax
- movl $__NR_ia32_sigreturn, %eax
- SYSCALL_ENTER_KERNEL
-.LEND_sigreturn:
- .size __kernel_sigreturn,.-.LSTART_sigreturn
-
- .section .text.rtsigreturn,"ax"
- .balign 32
- .globl __kernel_rt_sigreturn
- .type __kernel_rt_sigreturn,@function
-__kernel_rt_sigreturn:
-.LSTART_rt_sigreturn:
- movl $__NR_ia32_rt_sigreturn, %eax
- SYSCALL_ENTER_KERNEL
-.LEND_rt_sigreturn:
- .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
-
- .section .eh_frame,"a",@progbits
-.LSTARTFRAMES:
- .long .LENDCIES-.LSTARTCIES
-.LSTARTCIES:
- .long 0 /* CIE ID */
- .byte 1 /* Version number */
- .string "zRS" /* NUL-terminated augmentation string */
- .uleb128 1 /* Code alignment factor */
- .sleb128 -4 /* Data alignment factor */
- .byte 8 /* Return address register column */
- .uleb128 1 /* Augmentation value length */
- .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
- .byte 0x0c /* DW_CFA_def_cfa */
- .uleb128 4
- .uleb128 4
- .byte 0x88 /* DW_CFA_offset, column 0x8 */
- .uleb128 1
- .align 4
-.LENDCIES:
-
- .long .LENDFDE2-.LSTARTFDE2 /* Length FDE */
-.LSTARTFDE2:
- .long .LSTARTFDE2-.LSTARTFRAMES /* CIE pointer */
- /* HACK: The dwarf2 unwind routines will subtract 1 from the
- return address to get an address in the middle of the
- presumed call instruction. Since we didn't get here via
- a call, we need to include the nop before the real start
- to make up for it. */
- .long .LSTART_sigreturn-1-. /* PC-relative start address */
- .long .LEND_sigreturn-.LSTART_sigreturn+1
- .uleb128 0 /* Augmentation length */
- /* What follows are the instructions for the table generation.
- We record the locations of each register saved. This is
- complicated by the fact that the "CFA" is always assumed to
- be the value of the stack pointer in the caller. This means
- that we must define the CFA of this body of code to be the
- saved value of the stack pointer in the sigcontext. Which
- also means that there is no fixed relation to the other
- saved registers, which means that we must use DW_CFA_expression
- to compute their addresses. It also means that when we
- adjust the stack with the popl, we have to do it all over again. */
-
-#define do_cfa_expr(offset) \
- .byte 0x0f; /* DW_CFA_def_cfa_expression */ \
- .uleb128 1f-0f; /* length */ \
-0: .byte 0x74; /* DW_OP_breg4 */ \
- .sleb128 offset; /* offset */ \
- .byte 0x06; /* DW_OP_deref */ \
-1:
-
-#define do_expr(regno, offset) \
- .byte 0x10; /* DW_CFA_expression */ \
- .uleb128 regno; /* regno */ \
- .uleb128 1f-0f; /* length */ \
-0: .byte 0x74; /* DW_OP_breg4 */ \
- .sleb128 offset; /* offset */ \
-1:
-
- do_cfa_expr(IA32_SIGCONTEXT_esp+4)
- do_expr(0, IA32_SIGCONTEXT_eax+4)
- do_expr(1, IA32_SIGCONTEXT_ecx+4)
- do_expr(2, IA32_SIGCONTEXT_edx+4)
- do_expr(3, IA32_SIGCONTEXT_ebx+4)
- do_expr(5, IA32_SIGCONTEXT_ebp+4)
- do_expr(6, IA32_SIGCONTEXT_esi+4)
- do_expr(7, IA32_SIGCONTEXT_edi+4)
- do_expr(8, IA32_SIGCONTEXT_eip+4)
-
- .byte 0x42 /* DW_CFA_advance_loc 2 -- nop; popl eax. */
-
- do_cfa_expr(IA32_SIGCONTEXT_esp)
- do_expr(0, IA32_SIGCONTEXT_eax)
- do_expr(1, IA32_SIGCONTEXT_ecx)
- do_expr(2, IA32_SIGCONTEXT_edx)
- do_expr(3, IA32_SIGCONTEXT_ebx)
- do_expr(5, IA32_SIGCONTEXT_ebp)
- do_expr(6, IA32_SIGCONTEXT_esi)
- do_expr(7, IA32_SIGCONTEXT_edi)
- do_expr(8, IA32_SIGCONTEXT_eip)
-
- .align 4
-.LENDFDE2:
-
- .long .LENDFDE3-.LSTARTFDE3 /* Length FDE */
-.LSTARTFDE3:
- .long .LSTARTFDE3-.LSTARTFRAMES /* CIE pointer */
- /* HACK: See above wrt unwind library assumptions. */
- .long .LSTART_rt_sigreturn-1-. /* PC-relative start address */
- .long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1
- .uleb128 0 /* Augmentation */
- /* What follows are the instructions for the table generation.
- We record the locations of each register saved. This is
- slightly less complicated than the above, since we don't
- modify the stack pointer in the process. */
-
- do_cfa_expr(IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_esp)
- do_expr(0, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_eax)
- do_expr(1, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ecx)
- do_expr(2, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_edx)
- do_expr(3, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ebx)
- do_expr(5, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ebp)
- do_expr(6, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_esi)
- do_expr(7, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_edi)
- do_expr(8, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_eip)
-
- .align 4
-.LENDFDE3:
-
-#include "../../i386/kernel/vsyscall-note.S"
-
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
deleted file mode 100644
index ff5d8c9b96d..00000000000
--- a/arch/x86_64/kernel/Makefile
+++ /dev/null
@@ -1,63 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := head.o head64.o init_task.o vmlinux.lds
-EXTRA_AFLAGS := -traditional
-obj-y := process.o signal.o entry.o traps.o irq.o \
- ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_x86_64.o \
- x8664_ksyms.o i387.o syscall.o vsyscall.o \
- setup64.o bootflag.o e820.o reboot.o quirks.o i8237.o \
- pci-dma.o pci-nommu.o alternative.o hpet.o tsc.o bugs.o \
- perfctr-watchdog.o
-
-obj-$(CONFIG_STACKTRACE) += stacktrace.o
-obj-$(CONFIG_X86_MCE) += mce.o therm_throt.o
-obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o
-obj-$(CONFIG_X86_MCE_AMD) += mce_amd.o
-obj-$(CONFIG_MTRR) += ../../i386/kernel/cpu/mtrr/
-obj-$(CONFIG_ACPI) += acpi/
-obj-$(CONFIG_X86_MSR) += msr.o
-obj-$(CONFIG_MICROCODE) += microcode.o
-obj-$(CONFIG_X86_CPUID) += cpuid.o
-obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o tsc_sync.o
-obj-y += apic.o nmi.o
-obj-y += io_apic.o mpparse.o genapic.o genapic_flat.o
-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
-obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
-obj-$(CONFIG_PM) += suspend.o
-obj-$(CONFIG_HIBERNATION) += suspend_asm.o
-obj-$(CONFIG_CPU_FREQ) += cpufreq/
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_IOMMU) += pci-gart.o aperture.o
-obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary.o tce.o
-obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o
-obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_X86_PM_TIMER) += pmtimer.o
-obj-$(CONFIG_X86_VSMP) += vsmp.o
-obj-$(CONFIG_K8_NB) += k8.o
-obj-$(CONFIG_AUDIT) += audit.o
-
-obj-$(CONFIG_MODULES) += module.o
-obj-$(CONFIG_PCI) += early-quirks.o
-
-obj-y += topology.o
-obj-y += intel_cacheinfo.o
-obj-y += addon_cpuid_features.o
-obj-y += pcspeaker.o
-
-CFLAGS_vsyscall.o := $(PROFILING) -g0
-
-therm_throt-y += ../../i386/kernel/cpu/mcheck/therm_throt.o
-bootflag-y += ../../i386/kernel/bootflag.o
-cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o
-topology-y += ../../i386/kernel/topology.o
-microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o
-intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o
-addon_cpuid_features-y += ../../i386/kernel/cpu/addon_cpuid_features.o
-quirks-y += ../../i386/kernel/quirks.o
-i8237-y += ../../i386/kernel/i8237.o
-msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../i386/kernel/msr.o
-alternative-y += ../../i386/kernel/alternative.o
-pcspeaker-y += ../../i386/kernel/pcspeaker.o
-perfctr-watchdog-y += ../../i386/kernel/cpu/perfctr-watchdog.o
diff --git a/arch/x86_64/kernel/acpi/Makefile b/arch/x86_64/kernel/acpi/Makefile
deleted file mode 100644
index 080b9963f1b..00000000000
--- a/arch/x86_64/kernel/acpi/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-obj-y := boot.o
-boot-y := ../../../i386/kernel/acpi/boot.o
-obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
-
-ifneq ($(CONFIG_ACPI_PROCESSOR),)
-obj-y += processor.o
-processor-y := ../../../i386/kernel/acpi/processor.o ../../../i386/kernel/acpi/cstate.o
-endif
-
diff --git a/arch/x86_64/kernel/acpi/wakeup.S b/arch/x86_64/kernel/acpi/wakeup.S
deleted file mode 100644
index a06f2bcabef..00000000000
--- a/arch/x86_64/kernel/acpi/wakeup.S
+++ /dev/null
@@ -1,456 +0,0 @@
-.text
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/msr.h>
-
-# Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
-#
-# wakeup_code runs in real mode, and at unknown address (determined at run-time).
-# Therefore it must only use relative jumps/calls.
-#
-# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
-#
-# If physical address of wakeup_code is 0x12345, BIOS should call us with
-# cs = 0x1234, eip = 0x05
-#
-
-#define BEEP \
- inb $97, %al; \
- outb %al, $0x80; \
- movb $3, %al; \
- outb %al, $97; \
- outb %al, $0x80; \
- movb $-74, %al; \
- outb %al, $67; \
- outb %al, $0x80; \
- movb $-119, %al; \
- outb %al, $66; \
- outb %al, $0x80; \
- movb $15, %al; \
- outb %al, $66;
-
-
-ALIGN
- .align 16
-ENTRY(wakeup_start)
-wakeup_code:
- wakeup_code_start = .
- .code16
-
-# Running in *copy* of this code, somewhere in low 1MB.
-
- movb $0xa1, %al ; outb %al, $0x80
- cli
- cld
- # setup data segment
- movw %cs, %ax
- movw %ax, %ds # Make ds:0 point to wakeup_start
- movw %ax, %ss
-
- # Data segment must be set up before we can see whether to beep.
- testl $4, realmode_flags - wakeup_code
- jz 1f
- BEEP
-1:
-
- # Private stack is needed for ASUS board
- mov $(wakeup_stack - wakeup_code), %sp
-
- pushl $0 # Kill any dangerous flags
- popfl
-
- movl real_magic - wakeup_code, %eax
- cmpl $0x12345678, %eax
- jne bogus_real_magic
-
- call verify_cpu # Verify the cpu supports long
- # mode
- testl %eax, %eax
- jnz no_longmode
-
- testl $1, realmode_flags - wakeup_code
- jz 1f
- lcall $0xc000,$3
- movw %cs, %ax
- movw %ax, %ds # Bios might have played with that
- movw %ax, %ss
-1:
-
- testl $2, realmode_flags - wakeup_code
- jz 1f
- mov video_mode - wakeup_code, %ax
- call mode_set
-1:
-
- movw $0xb800, %ax
- movw %ax,%fs
- movw $0x0e00 + 'L', %fs:(0x10)
-
- movb $0xa2, %al ; outb %al, $0x80
-
- mov %ds, %ax # Find 32bit wakeup_code addr
- movzx %ax, %esi # (Convert %ds:gdt to a liner ptr)
- shll $4, %esi
- # Fix up the vectors
- addl %esi, wakeup_32_vector - wakeup_code
- addl %esi, wakeup_long64_vector - wakeup_code
- addl %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer
-
- lidtl %ds:idt_48a - wakeup_code
- lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is
- # appropriate
-
- movl $1, %eax # protected mode (PE) bit
- lmsw %ax # This is it!
- jmp 1f
-1:
-
- ljmpl *(wakeup_32_vector - wakeup_code)
-
- .balign 4
-wakeup_32_vector:
- .long wakeup_32 - wakeup_code
- .word __KERNEL32_CS, 0
-
- .code32
-wakeup_32:
-# Running in this code, but at low address; paging is not yet turned on.
- movb $0xa5, %al ; outb %al, $0x80
-
- movl $__KERNEL_DS, %eax
- movl %eax, %ds
-
- movw $0x0e00 + 'i', %ds:(0xb8012)
- movb $0xa8, %al ; outb %al, $0x80;
-
- /*
- * Prepare for entering 64bits mode
- */
-
- /* Enable PAE */
- xorl %eax, %eax
- btsl $5, %eax
- movl %eax, %cr4
-
- /* Setup early boot stage 4 level pagetables */
- leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax
- movl %eax, %cr3
-
- /* Check if nx is implemented */
- movl $0x80000001, %eax
- cpuid
- movl %edx,%edi
-
- /* Enable Long Mode */
- xorl %eax, %eax
- btsl $_EFER_LME, %eax
-
- /* No Execute supported? */
- btl $20,%edi
- jnc 1f
- btsl $_EFER_NX, %eax
-
- /* Make changes effective */
-1: movl $MSR_EFER, %ecx
- xorl %edx, %edx
- wrmsr
-
- xorl %eax, %eax
- btsl $31, %eax /* Enable paging and in turn activate Long Mode */
- btsl $0, %eax /* Enable protected mode */
-
- /* Make changes effective */
- movl %eax, %cr0
-
- /* At this point:
- CR4.PAE must be 1
- CS.L must be 0
- CR3 must point to PML4
- Next instruction must be a branch
- This must be on identity-mapped page
- */
- /*
- * At this point we're in long mode but in 32bit compatibility mode
- * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
- * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we load
- * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
- */
-
- /* Finally jump in 64bit mode */
- ljmp *(wakeup_long64_vector - wakeup_code)(%esi)
-
- .balign 4
-wakeup_long64_vector:
- .long wakeup_long64 - wakeup_code
- .word __KERNEL_CS, 0
-
-.code64
-
- /* Hooray, we are in Long 64-bit mode (but still running in
- * low memory)
- */
-wakeup_long64:
- /*
- * We must switch to a new descriptor in kernel space for the GDT
- * because soon the kernel won't have access anymore to the userspace
- * addresses where we're currently running on. We have to do that here
- * because in 32bit we couldn't load a 64bit linear address.
- */
- lgdt cpu_gdt_descr
-
- movw $0x0e00 + 'n', %ds:(0xb8014)
- movb $0xa9, %al ; outb %al, $0x80
-
- movq saved_magic, %rax
- movq $0x123456789abcdef0, %rdx
- cmpq %rdx, %rax
- jne bogus_64_magic
-
- movw $0x0e00 + 'u', %ds:(0xb8016)
-
- nop
- nop
- movw $__KERNEL_DS, %ax
- movw %ax, %ss
- movw %ax, %ds
- movw %ax, %es
- movw %ax, %fs
- movw %ax, %gs
- movq saved_rsp, %rsp
-
- movw $0x0e00 + 'x', %ds:(0xb8018)
- movq saved_rbx, %rbx
- movq saved_rdi, %rdi
- movq saved_rsi, %rsi
- movq saved_rbp, %rbp
-
- movw $0x0e00 + '!', %ds:(0xb801a)
- movq saved_rip, %rax
- jmp *%rax
-
-.code32
-
- .align 64
-gdta:
- /* Its good to keep gdt in sync with one in trampoline.S */
- .word 0, 0, 0, 0 # dummy
- /* ??? Why I need the accessed bit set in order for this to work? */
- .quad 0x00cf9b000000ffff # __KERNEL32_CS
- .quad 0x00af9b000000ffff # __KERNEL_CS
- .quad 0x00cf93000000ffff # __KERNEL_DS
-
-idt_48a:
- .word 0 # idt limit = 0
- .word 0, 0 # idt base = 0L
-
-gdt_48a:
- .word 0x800 # gdt limit=2048,
- # 256 GDT entries
- .long gdta - wakeup_code # gdt base (relocated in later)
-
-real_magic: .quad 0
-video_mode: .quad 0
-realmode_flags: .quad 0
-
-.code16
-bogus_real_magic:
- movb $0xba,%al ; outb %al,$0x80
- jmp bogus_real_magic
-
-.code64
-bogus_64_magic:
- movb $0xb3,%al ; outb %al,$0x80
- jmp bogus_64_magic
-
-.code16
-no_longmode:
- movb $0xbc,%al ; outb %al,$0x80
- jmp no_longmode
-
-#include "../verify_cpu.S"
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- * NORMAL_VGA (-1)
- * EXTENDED_VGA (-2)
- * ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-# Setting of user mode (AX=mode ID) => CF=success
-
-# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
-# modes, we should probably compile in the video code from the boot
-# directory.
-.code16
-mode_set:
- movw %ax, %bx
- subb $VIDEO_FIRST_VESA>>8, %bh
- cmpb $2, %bh
- jb check_vesa
-
-setbad:
- clc
- ret
-
-check_vesa:
- orw $0x4000, %bx # Use linear frame buffer
- movw $0x4f02, %ax # VESA BIOS mode set call
- int $0x10
- cmpw $0x004f, %ax # AL=4f if implemented
- jnz setbad # AH=0 if OK
-
- stc
- ret
-
-wakeup_stack_begin: # Stack grows down
-
-.org 0xff0
-wakeup_stack: # Just below end of page
-
-.org 0x1000
-ENTRY(wakeup_level4_pgt)
- .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
- .fill 510,8,0
- /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
- .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
-
-ENTRY(wakeup_end)
-
-##
-# acpi_copy_wakeup_routine
-#
-# Copy the above routine to low memory.
-#
-# Parameters:
-# %rdi: place to copy wakeup routine to
-#
-# Returned address is location of code in low memory (past data and stack)
-#
- .code64
-ENTRY(acpi_copy_wakeup_routine)
- pushq %rax
- pushq %rdx
-
- movl saved_video_mode, %edx
- movl %edx, video_mode - wakeup_start (,%rdi)
- movl acpi_realmode_flags, %edx
- movl %edx, realmode_flags - wakeup_start (,%rdi)
- movq $0x12345678, real_magic - wakeup_start (,%rdi)
- movq $0x123456789abcdef0, %rdx
- movq %rdx, saved_magic
-
- movq saved_magic, %rax
- movq $0x123456789abcdef0, %rdx
- cmpq %rdx, %rax
- jne bogus_64_magic
-
- # restore the regs we used
- popq %rdx
- popq %rax
-ENTRY(do_suspend_lowlevel_s4bios)
- ret
-
- .align 2
- .p2align 4,,15
-.globl do_suspend_lowlevel
- .type do_suspend_lowlevel,@function
-do_suspend_lowlevel:
-.LFB5:
- subq $8, %rsp
- xorl %eax, %eax
- call save_processor_state
-
- movq %rsp, saved_context_esp(%rip)
- movq %rax, saved_context_eax(%rip)
- movq %rbx, saved_context_ebx(%rip)
- movq %rcx, saved_context_ecx(%rip)
- movq %rdx, saved_context_edx(%rip)
- movq %rbp, saved_context_ebp(%rip)
- movq %rsi, saved_context_esi(%rip)
- movq %rdi, saved_context_edi(%rip)
- movq %r8, saved_context_r08(%rip)
- movq %r9, saved_context_r09(%rip)
- movq %r10, saved_context_r10(%rip)
- movq %r11, saved_context_r11(%rip)
- movq %r12, saved_context_r12(%rip)
- movq %r13, saved_context_r13(%rip)
- movq %r14, saved_context_r14(%rip)
- movq %r15, saved_context_r15(%rip)
- pushfq ; popq saved_context_eflags(%rip)
-
- movq $.L97, saved_rip(%rip)
-
- movq %rsp,saved_rsp
- movq %rbp,saved_rbp
- movq %rbx,saved_rbx
- movq %rdi,saved_rdi
- movq %rsi,saved_rsi
-
- addq $8, %rsp
- movl $3, %edi
- xorl %eax, %eax
- jmp acpi_enter_sleep_state
-.L97:
- .p2align 4,,7
-.L99:
- .align 4
- movl $24, %eax
- movw %ax, %ds
- movq saved_context+58(%rip), %rax
- movq %rax, %cr4
- movq saved_context+50(%rip), %rax
- movq %rax, %cr3
- movq saved_context+42(%rip), %rax
- movq %rax, %cr2
- movq saved_context+34(%rip), %rax
- movq %rax, %cr0
- pushq saved_context_eflags(%rip) ; popfq
- movq saved_context_esp(%rip), %rsp
- movq saved_context_ebp(%rip), %rbp
- movq saved_context_eax(%rip), %rax
- movq saved_context_ebx(%rip), %rbx
- movq saved_context_ecx(%rip), %rcx
- movq saved_context_edx(%rip), %rdx
- movq saved_context_esi(%rip), %rsi
- movq saved_context_edi(%rip), %rdi
- movq saved_context_r08(%rip), %r8
- movq saved_context_r09(%rip), %r9
- movq saved_context_r10(%rip), %r10
- movq saved_context_r11(%rip), %r11
- movq saved_context_r12(%rip), %r12
- movq saved_context_r13(%rip), %r13
- movq saved_context_r14(%rip), %r14
- movq saved_context_r15(%rip), %r15
-
- xorl %eax, %eax
- addq $8, %rsp
- jmp restore_processor_state
-.LFE5:
-.Lfe5:
- .size do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel
-
-.data
-ALIGN
-ENTRY(saved_rbp) .quad 0
-ENTRY(saved_rsi) .quad 0
-ENTRY(saved_rdi) .quad 0
-ENTRY(saved_rbx) .quad 0
-
-ENTRY(saved_rip) .quad 0
-ENTRY(saved_rsp) .quad 0
-
-ENTRY(saved_magic) .quad 0
diff --git a/arch/x86_64/kernel/cpufreq/Makefile b/arch/x86_64/kernel/cpufreq/Makefile
deleted file mode 100644
index 753ce1dd418..00000000000
--- a/arch/x86_64/kernel/cpufreq/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Reuse the i386 cpufreq drivers
-#
-
-SRCDIR := ../../../i386/kernel/cpu/cpufreq
-
-obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
-obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
-obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
-obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
-obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
-
-powernow-k8-objs := ${SRCDIR}/powernow-k8.o
-speedstep-centrino-objs := ${SRCDIR}/speedstep-centrino.o
-acpi-cpufreq-objs := ${SRCDIR}/acpi-cpufreq.o
-p4-clockmod-objs := ${SRCDIR}/p4-clockmod.o
-speedstep-lib-objs := ${SRCDIR}/speedstep-lib.o
diff --git a/arch/x86_64/kernel/syscall.c b/arch/x86_64/kernel/syscall.c
deleted file mode 100644
index 63d592c276c..00000000000
--- a/arch/x86_64/kernel/syscall.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* System call table for x86-64. */
-
-#include <linux/linkage.h>
-#include <linux/sys.h>
-#include <linux/cache.h>
-#include <asm/asm-offsets.h>
-
-#define __NO_STUBS
-
-#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
-#undef _ASM_X86_64_UNISTD_H_
-#include <asm-x86_64/unistd.h>
-
-#undef __SYSCALL
-#define __SYSCALL(nr, sym) [ nr ] = sym,
-#undef _ASM_X86_64_UNISTD_H_
-
-typedef void (*sys_call_ptr_t)(void);
-
-extern void sys_ni_syscall(void);
-
-const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
- /* Smells like a like a compiler bug -- it doesn't work when the & below is removed. */
- [0 ... __NR_syscall_max] = &sys_ni_syscall,
-#include <asm-x86_64/unistd.h>
-};
diff --git a/arch/x86_64/kernel/trampoline.S b/arch/x86_64/kernel/trampoline.S
deleted file mode 100644
index e7e2764c461..00000000000
--- a/arch/x86_64/kernel/trampoline.S
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- *
- * Trampoline.S Derived from Setup.S by Linus Torvalds
- *
- * 4 Jan 1997 Michael Chastain: changed to gnu as.
- * 15 Sept 2005 Eric Biederman: 64bit PIC support
- *
- * Entry: CS:IP point to the start of our code, we are
- * in real mode with no stack, but the rest of the
- * trampoline page to make our stack and everything else
- * is a mystery.
- *
- * In fact we don't actually need a stack so we don't
- * set one up.
- *
- * On entry to trampoline_data, the processor is in real mode
- * with 16-bit addressing and 16-bit data. CS has some value
- * and IP is zero. Thus, data addresses need to be absolute
- * (no relocation) and are taken with regard to r_base.
- *
- * With the addition of trampoline_level4_pgt this code can
- * now enter a 64bit kernel that lives at arbitrary 64bit
- * physical addresses.
- *
- * If you work on this file, check the object module with objdump
- * --full-contents --reloc to make sure there are no relocation
- * entries.
- */
-
-#include <linux/linkage.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/msr.h>
-#include <asm/segment.h>
-
-.data
-
-.code16
-
-ENTRY(trampoline_data)
-r_base = .
- cli # We should be safe anyway
- wbinvd
- mov %cs, %ax # Code and data in the same place
- mov %ax, %ds
- mov %ax, %es
- mov %ax, %ss
-
-
- movl $0xA5A5A5A5, trampoline_data - r_base
- # write marker for master knows we're running
-
- # Setup stack
- movw $(trampoline_stack_end - r_base), %sp
-
- call verify_cpu # Verify the cpu supports long mode
- testl %eax, %eax # Check for return code
- jnz no_longmode
-
- mov %cs, %ax
- movzx %ax, %esi # Find the 32bit trampoline location
- shll $4, %esi
-
- # Fixup the vectors
- addl %esi, startup_32_vector - r_base
- addl %esi, startup_64_vector - r_base
- addl %esi, tgdt + 2 - r_base # Fixup the gdt pointer
-
- /*
- * GDT tables in non default location kernel can be beyond 16MB and
- * lgdt will not be able to load the address as in real mode default
- * operand size is 16bit. Use lgdtl instead to force operand size
- * to 32 bit.
- */
-
- lidtl tidt - r_base # load idt with 0, 0
- lgdtl tgdt - r_base # load gdt with whatever is appropriate
-
- xor %ax, %ax
- inc %ax # protected mode (PE) bit
- lmsw %ax # into protected mode
-
- # flush prefetch and jump to startup_32
- ljmpl *(startup_32_vector - r_base)
-
- .code32
- .balign 4
-startup_32:
- movl $__KERNEL_DS, %eax # Initialize the %ds segment register
- movl %eax, %ds
-
- xorl %eax, %eax
- btsl $5, %eax # Enable PAE mode
- movl %eax, %cr4
-
- # Setup trampoline 4 level pagetables
- leal (trampoline_level4_pgt - r_base)(%esi), %eax
- movl %eax, %cr3
-
- movl $MSR_EFER, %ecx
- movl $(1 << _EFER_LME), %eax # Enable Long Mode
- xorl %edx, %edx
- wrmsr
-
- xorl %eax, %eax
- btsl $31, %eax # Enable paging and in turn activate Long Mode
- btsl $0, %eax # Enable protected mode
- movl %eax, %cr0
-
- /*
- * At this point we're in long mode but in 32bit compatibility mode
- * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
- * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use
- * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
- */
- ljmp *(startup_64_vector - r_base)(%esi)
-
- .code64
- .balign 4
-startup_64:
- # Now jump into the kernel using virtual addresses
- movq $secondary_startup_64, %rax
- jmp *%rax
-
- .code16
-no_longmode:
- hlt
- jmp no_longmode
-#include "verify_cpu.S"
-
- # Careful these need to be in the same 64K segment as the above;
-tidt:
- .word 0 # idt limit = 0
- .word 0, 0 # idt base = 0L
-
- # Duplicate the global descriptor table
- # so the kernel can live anywhere
- .balign 4
-tgdt:
- .short tgdt_end - tgdt # gdt limit
- .long tgdt - r_base
- .short 0
- .quad 0x00cf9b000000ffff # __KERNEL32_CS
- .quad 0x00af9b000000ffff # __KERNEL_CS
- .quad 0x00cf93000000ffff # __KERNEL_DS
-tgdt_end:
-
- .balign 4
-startup_32_vector:
- .long startup_32 - r_base
- .word __KERNEL32_CS, 0
-
- .balign 4
-startup_64_vector:
- .long startup_64 - r_base
- .word __KERNEL_CS, 0
-
-trampoline_stack:
- .org 0x1000
-trampoline_stack_end:
-ENTRY(trampoline_level4_pgt)
- .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
- .fill 510,8,0
- .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
-
-ENTRY(trampoline_end)
diff --git a/arch/x86_64/lib/Makefile b/arch/x86_64/lib/Makefile
deleted file mode 100644
index c9432717839..00000000000
--- a/arch/x86_64/lib/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile for x86_64-specific library files.
-#
-
-CFLAGS_csum-partial.o := -funroll-loops
-
-obj-y := io.o iomap_copy.o
-obj-$(CONFIG_SMP) += msr-on-cpu.o
-
-lib-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \
- usercopy.o getuser.o putuser.o \
- thunk.o clear_page.o copy_page.o bitstr.o bitops.o
-lib-y += memcpy.o memmove.o memset.o copy_user.o rwlock.o copy_user_nocache.o
diff --git a/arch/x86_64/lib/msr-on-cpu.c b/arch/x86_64/lib/msr-on-cpu.c
deleted file mode 100644
index 47e0ec47c37..00000000000
--- a/arch/x86_64/lib/msr-on-cpu.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../i386/lib/msr-on-cpu.c"
diff --git a/arch/x86_64/mm/Makefile b/arch/x86_64/mm/Makefile
deleted file mode 100644
index d25ac86fe27..00000000000
--- a/arch/x86_64/mm/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux x86_64-specific parts of the memory manager.
-#
-
-obj-y := init.o fault.o ioremap.o extable.o pageattr.o mmap.o
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_NUMA) += numa.o
-obj-$(CONFIG_K8_NUMA) += k8topology.o
-obj-$(CONFIG_ACPI_NUMA) += srat.o
-
-hugetlbpage-y = ../../i386/mm/hugetlbpage.o
diff --git a/arch/x86_64/oprofile/Kconfig b/arch/x86_64/oprofile/Kconfig
deleted file mode 100644
index d8a84088471..00000000000
--- a/arch/x86_64/oprofile/Kconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-config PROFILING
- bool "Profiling support (EXPERIMENTAL)"
- help
- Say Y here to enable the extended profiling support mechanisms used
- by profilers such as OProfile.
-
-
-config OPROFILE
- tristate "OProfile system profiling (EXPERIMENTAL)"
- depends on PROFILING
- help
- OProfile is a profiling system capable of profiling the
- whole system, include the kernel, kernel modules, libraries,
- and applications.
-
- If unsure, say N.
-
diff --git a/arch/x86_64/oprofile/Makefile b/arch/x86_64/oprofile/Makefile
deleted file mode 100644
index 6be32683e1b..00000000000
--- a/arch/x86_64/oprofile/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# oprofile for x86-64.
-# Just reuse the one from i386.
-#
-
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
- oprof.o cpu_buffer.o buffer_sync.o \
- event_buffer.o oprofile_files.o \
- oprofilefs.o oprofile_stats.o \
- timer_int.o )
-
-OPROFILE-y := init.o backtrace.o
-OPROFILE-$(CONFIG_X86_LOCAL_APIC) += nmi_int.o op_model_athlon.o op_model_p4.o \
- op_model_ppro.o
-OPROFILE-$(CONFIG_X86_IO_APIC) += nmi_timer_int.o
-
-oprofile-y = $(DRIVER_OBJS) $(addprefix ../../i386/oprofile/, $(OPROFILE-y))
diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile
deleted file mode 100644
index c9eddc8859c..00000000000
--- a/arch/x86_64/pci/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Makefile for X86_64 specific PCI routines
-#
-# Reuse the i386 PCI subsystem
-#
-EXTRA_CFLAGS += -Iarch/i386/pci
-
-obj-y := i386.o
-obj-$(CONFIG_PCI_DIRECT)+= direct.o
-obj-y += fixup.o init.o
-obj-$(CONFIG_ACPI) += acpi.o
-obj-y += legacy.o irq.o common.o early.o
-# mmconfig has a 64bit special
-obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o
-
-obj-$(CONFIG_NUMA) += k8-bus.o
-
-direct-y += ../../i386/pci/direct.o
-acpi-y += ../../i386/pci/acpi.o
-legacy-y += ../../i386/pci/legacy.o
-irq-y += ../../i386/pci/irq.o
-common-y += ../../i386/pci/common.o
-fixup-y += ../../i386/pci/fixup.o
-i386-y += ../../i386/pci/i386.o
-init-y += ../../i386/pci/init.o
-early-y += ../../i386/pci/early.o
-mmconfig-shared-y += ../../i386/pci/mmconfig-shared.o
diff --git a/arch/x86_64/vdso/vdso.S b/arch/x86_64/vdso/vdso.S
deleted file mode 100644
index 92e80c1972a..00000000000
--- a/arch/x86_64/vdso/vdso.S
+++ /dev/null
@@ -1,2 +0,0 @@
- .section ".vdso","a"
- .incbin "arch/x86_64/vdso/vdso.so"
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index d9d033e07e1..dd9bd4310c8 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -69,13 +69,79 @@ source "drivers/media/common/Kconfig"
config VIDEO_TUNER
tristate
depends on I2C
+ select TUNER_MT20XX if !VIDEO_TUNER_CUSTOMIZE
+ select TUNER_TDA8290 if !VIDEO_TUNER_CUSTOMIZE
+ select TUNER_TEA5761 if !VIDEO_TUNER_CUSTOMIZE
+ select TUNER_TEA5767 if !VIDEO_TUNER_CUSTOMIZE
+ select TUNER_SIMPLE if !VIDEO_TUNER_CUSTOMIZE
+
+menuconfig VIDEO_TUNER_CUSTOMIZE
+ bool "Customize analog tuner modules to build"
+ depends on VIDEO_TUNER
+ help
+ This allows the user to deselect tuner drivers unnecessary
+ for their hardware from the build. Use this option with care
+ as deselecting tuner drivers which are in fact necessary will
+ result in V4L devices which cannot be tuned due to lack of
+ driver support
+
+ If unsure say N.
+
+if VIDEO_TUNER_CUSTOMIZE
+
+config TUNER_MT20XX
+ tristate "Microtune 2032 / 2050 tuners"
+ depends on I2C
+ default m if VIDEO_TUNER_CUSTOMIZE
+ help
+ Say Y here to include support for the MT2032 / MT2050 tuner.
+
+config TUNER_TDA8290
+ tristate "TDA 8290+8275(a) tuner combo"
+ depends on I2C
+ default m if VIDEO_TUNER_CUSTOMIZE
+ help
+ Say Y here to include support for Philips TDA8290+8275(a) tuner.
+
+config TUNER_TEA5761
+ tristate "TEA 5761 radio tuner (EXPERIMENTAL)"
+ depends on I2C && EXPERIMENTAL
+ default m if VIDEO_TUNER_CUSTOMIZE
+ help
+ Say Y here to include support for the Philips TEA5761 radio tuner.
+
+config TUNER_TEA5767
+ tristate "TEA 5767 radio tuner"
+ depends on I2C
+ default m if VIDEO_TUNER_CUSTOMIZE
+ help
+ Say Y here to include support for the Philips TEA5767 radio tuner.
+
+config TUNER_SIMPLE
+ tristate "Simple tuner support"
+ depends on I2C
+ default m if VIDEO_TUNER_CUSTOMIZE
+ help
+ Say Y here to include support for various simple tuners.
-config VIDEO_BUF
+endif # VIDEO_TUNER_CUSTOMIZE
+
+config VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_DMA_SG
depends on PCI
+ select VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_VMALLOC
+ select VIDEOBUF_GEN
tristate
-config VIDEO_BUF_DVB
+config VIDEOBUF_DVB
tristate
+ select VIDEOBUF_GEN
+ select VIDEOBUF_DMA_SG
config VIDEO_BTCX
tristate
diff --git a/drivers/media/common/Kconfig b/drivers/media/common/Kconfig
index 5c63c8e24ee..c5092ef1082 100644
--- a/drivers/media/common/Kconfig
+++ b/drivers/media/common/Kconfig
@@ -5,5 +5,5 @@ config VIDEO_SAA7146
config VIDEO_SAA7146_VV
tristate
depends on VIDEO_DEV
- select VIDEO_BUF
+ select VIDEOBUF_DMA_SG
select VIDEO_SAA7146
diff --git a/drivers/media/common/ir-functions.c b/drivers/media/common/ir-functions.c
index a3292e955aa..e7c3ab951a4 100644
--- a/drivers/media/common/ir-functions.c
+++ b/drivers/media/common/ir-functions.c
@@ -21,7 +21,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/jiffies.h>
#include <media/ir-common.h>
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c
index cbd1184b521..aefcf28da1c 100644
--- a/drivers/media/common/ir-keymaps.c
+++ b/drivers/media/common/ir-keymaps.c
@@ -20,7 +20,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/input.h>
#include <media/ir-common.h>
@@ -1783,3 +1782,64 @@ IR_KEYTAB_TYPE ir_codes_tt_1500[IR_KEYTAB_SIZE] = {
};
EXPORT_SYMBOL_GPL(ir_codes_tt_1500);
+
+/* DViCO FUSION HDTV MCE remote */
+IR_KEYTAB_TYPE ir_codes_fusionhdtv_mce[IR_KEYTAB_SIZE] = {
+
+ [ 0x0b ] = KEY_1,
+ [ 0x17 ] = KEY_2,
+ [ 0x1b ] = KEY_3,
+ [ 0x07 ] = KEY_4,
+ [ 0x50 ] = KEY_5,
+ [ 0x54 ] = KEY_6,
+ [ 0x48 ] = KEY_7,
+ [ 0x4c ] = KEY_8,
+ [ 0x58 ] = KEY_9,
+ [ 0x03 ] = KEY_0,
+
+ [ 0x5e ] = KEY_OK,
+ [ 0x51 ] = KEY_UP,
+ [ 0x53 ] = KEY_DOWN,
+ [ 0x5b ] = KEY_LEFT,
+ [ 0x5f ] = KEY_RIGHT,
+
+ [ 0x02 ] = KEY_TV, /* Labeled DTV on remote */
+ [ 0x0e ] = KEY_MP3,
+ [ 0x1a ] = KEY_DVD,
+ [ 0x1e ] = KEY_FAVORITES, /* Labeled CPF on remote */
+ [ 0x16 ] = KEY_SETUP,
+ [ 0x46 ] = KEY_POWER2, /* TV On/Off button on remote */
+ [ 0x0a ] = KEY_EPG, /* Labeled Guide on remote */
+
+ [ 0x49 ] = KEY_BACK,
+ [ 0x59 ] = KEY_INFO, /* Labeled MORE on remote */
+ [ 0x4d ] = KEY_MENU, /* Labeled DVDMENU on remote */
+ [ 0x55 ] = KEY_CYCLEWINDOWS, /* Labeled ALT-TAB on remote */
+
+ [ 0x0f ] = KEY_PREVIOUSSONG, /* Labeled |<< REPLAY on remote */
+ [ 0x12 ] = KEY_NEXTSONG, /* Labeled >>| SKIP on remote */
+ [ 0x42 ] = KEY_ENTER, /* Labeled START with a green
+ * MS windows logo on remote */
+
+ [ 0x15 ] = KEY_VOLUMEUP,
+ [ 0x05 ] = KEY_VOLUMEDOWN,
+ [ 0x11 ] = KEY_CHANNELUP,
+ [ 0x09 ] = KEY_CHANNELDOWN,
+
+ [ 0x52 ] = KEY_CAMERA,
+ [ 0x5a ] = KEY_TUNER,
+ [ 0x19 ] = KEY_OPEN,
+
+ [ 0x13 ] = KEY_MODE, /* 4:3 16:9 select */
+ [ 0x1f ] = KEY_ZOOM,
+
+ [ 0x43 ] = KEY_REWIND,
+ [ 0x47 ] = KEY_PLAYPAUSE,
+ [ 0x4f ] = KEY_FASTFORWARD,
+ [ 0x57 ] = KEY_MUTE,
+ [ 0x0d ] = KEY_STOP,
+ [ 0x01 ] = KEY_RECORD,
+ [ 0x4e ] = KEY_POWER,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_fusionhdtv_mce);
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index ba6701e9767..365a22118a0 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -100,7 +100,7 @@ int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
* general helper functions
****************************************************************************/
-/* this is videobuf_vmalloc_to_sg() from video-buf.c
+/* this is videobuf_vmalloc_to_sg() from videobuf-dma-sg.c
make sure virt has been allocated with vmalloc_32(), otherwise the BUG()
may be triggered on highmem machines */
static struct scatterlist* vmalloc_to_sg(unsigned char *virt, int nr_pages)
@@ -248,10 +248,11 @@ int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt
static irqreturn_t interrupt_hw(int irq, void *dev_id)
{
struct saa7146_dev *dev = dev_id;
- u32 isr = 0;
+ u32 isr;
+ u32 ack_isr;
/* read out the interrupt status register */
- isr = saa7146_read(dev, ISR);
+ ack_isr = isr = saa7146_read(dev, ISR);
/* is this our interrupt? */
if ( 0 == isr ) {
@@ -259,8 +260,6 @@ static irqreturn_t interrupt_hw(int irq, void *dev_id)
return IRQ_NONE;
}
- saa7146_write(dev, ISR, isr);
-
if( 0 != (dev->ext)) {
if( 0 != (dev->ext->irq_mask & isr )) {
if( 0 != dev->ext->irq_func ) {
@@ -283,21 +282,16 @@ static irqreturn_t interrupt_hw(int irq, void *dev_id)
isr &= ~MASK_28;
}
if (0 != (isr & (MASK_16|MASK_17))) {
- u32 status = saa7146_read(dev, I2C_STATUS);
- if( (0x3 == (status & 0x3)) || (0 == (status & 0x1)) ) {
- SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
- /* only wake up if we expect something */
- if( 0 != dev->i2c_op ) {
- u32 psr = (saa7146_read(dev, PSR) >> 16) & 0x2;
- u32 ssr = (saa7146_read(dev, SSR) >> 17) & 0x1f;
- DEB_I2C(("irq: i2c, status: 0x%08x, psr:0x%02x, ssr:0x%02x).\n",status,psr,ssr));
- dev->i2c_op = 0;
- wake_up(&dev->i2c_wq);
- } else {
- DEB_I2C(("unexpected irq: i2c, status: 0x%08x, isr %#x\n",status, isr));
- }
+ SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
+ /* only wake up if we expect something */
+ if (0 != dev->i2c_op) {
+ dev->i2c_op = 0;
+ wake_up(&dev->i2c_wq);
} else {
- DEB_I2C(("unhandled irq: i2c, status: 0x%08x, isr %#x\n",status, isr));
+ u32 psr = saa7146_read(dev, PSR);
+ u32 ssr = saa7146_read(dev, SSR);
+ printk(KERN_WARNING "%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n",
+ dev->name, isr, psr, ssr);
}
isr &= ~(MASK_16|MASK_17);
}
@@ -306,6 +300,7 @@ static irqreturn_t interrupt_hw(int irq, void *dev_id)
ERR(("disabling interrupt source(s)!\n"));
SAA7146_IER_DISABLE(dev,isr);
}
+ saa7146_write(dev, ISR, ack_isr);
return IRQ_HANDLED;
}
@@ -548,7 +543,6 @@ EXPORT_SYMBOL_GPL(saa7146_wait_for_debi_done);
EXPORT_SYMBOL_GPL(saa7146_setgpio);
-EXPORT_SYMBOL_GPL(saa7146_i2c_transfer);
EXPORT_SYMBOL_GPL(saa7146_i2c_adapter_prepare);
EXPORT_SYMBOL_GPL(saa7146_debug);
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index b4770aecc01..67d1b1b1b25 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -53,13 +53,14 @@ void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits)
void saa7146_dma_free(struct saa7146_dev *dev,struct videobuf_queue *q,
struct saa7146_buf *buf)
{
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
DEB_EE(("dev:%p, buf:%p\n",dev,buf));
BUG_ON(in_interrupt());
videobuf_waiton(&buf->vb,0,0);
- videobuf_dma_unmap(q, &buf->vb.dma);
- videobuf_dma_free(&buf->vb.dma);
+ videobuf_dma_unmap(q, dma);
+ videobuf_dma_free(dma);
buf->vb.state = STATE_NEEDS_INIT;
}
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index 8c85efc2652..7e7689afae6 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -202,7 +202,8 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d
/* a signal arrived */
return -ERESTARTSYS;
- printk(KERN_WARNING "saa7146_i2c_writeout: timed out waiting for end of xfer\n");
+ printk(KERN_WARNING "%s %s [irq]: timed out waiting for end of xfer\n",
+ dev->name, __FUNCTION__);
return -EIO;
}
status = saa7146_read(dev, I2C_STATUS);
@@ -219,7 +220,8 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d
break;
}
if (time_after(jiffies,timeout)) {
- printk(KERN_WARNING "saa7146_i2c_writeout: timed out waiting for MC2\n");
+ printk(KERN_WARNING "%s %s: timed out waiting for MC2\n",
+ dev->name, __FUNCTION__);
return -EIO;
}
}
@@ -235,7 +237,8 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d
/* this is normal when probing the bus
* (no answer from nonexisistant device...)
*/
- DEB_I2C(("saa7146_i2c_writeout: timed out waiting for end of xfer\n"));
+ printk(KERN_WARNING "%s %s [poll]: timed out waiting for end of xfer\n",
+ dev->name, __FUNCTION__);
return -EIO;
}
if (++trial < 50 && short_delay)
@@ -246,8 +249,16 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d
}
/* give a detailed status report */
- if ( 0 != (status & SAA7146_I2C_ERR)) {
-
+ if ( 0 != (status & (SAA7146_I2C_SPERR | SAA7146_I2C_APERR |
+ SAA7146_I2C_DTERR | SAA7146_I2C_DRERR |
+ SAA7146_I2C_AL | SAA7146_I2C_ERR |
+ SAA7146_I2C_BUSY)) ) {
+
+ if ( 0 == (status & SAA7146_I2C_ERR) ||
+ 0 == (status & SAA7146_I2C_BUSY) ) {
+ /* it may take some time until ERR goes high - ignore */
+ DEB_I2C(("unexpected i2c status %04x\n", status));
+ }
if( 0 != (status & SAA7146_I2C_SPERR) ) {
DEB_I2C(("error due to invalid start/stop condition.\n"));
}
@@ -277,7 +288,7 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d
return 0;
}
-int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *msgs, int num, int retries)
+static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *msgs, int num, int retries)
{
int i = 0, count = 0;
u32* buffer = dev->d_i2c.cpu_addr;
diff --git a/drivers/media/common/saa7146_vbi.c b/drivers/media/common/saa7146_vbi.c
index 063608462eb..6103484e444 100644
--- a/drivers/media/common/saa7146_vbi.c
+++ b/drivers/media/common/saa7146_vbi.c
@@ -165,7 +165,7 @@ static void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf
/* we don't wait here for the first field anymore. this is different from the video
capture and might cause that the first buffer is only half filled (with only
one field). but since this is some sort of streaming data, this is not that negative.
- but by doing this, we can use the whole engine from video-buf.c... */
+ but by doing this, we can use the whole engine from videobuf-dma-sg.c... */
/*
WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | e_wait);
@@ -239,6 +239,8 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,e
saa7146_dma_free(dev,q,buf);
if (STATE_NEEDS_INIT == buf->vb.state) {
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+
buf->vb.width = llength;
buf->vb.height = lines;
buf->vb.size = size;
@@ -250,7 +252,8 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,e
err = videobuf_iolock(q,&buf->vb, NULL);
if (err)
goto oops;
- err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2], buf->vb.dma.sglist, buf->vb.dma.sglen);
+ err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2],
+ dma->sglist, dma->sglen);
if (0 != err)
return err;
}
@@ -404,7 +407,7 @@ static int vbi_open(struct saa7146_dev *dev, struct file *file)
fh->vbi_fmt.start[1] = 312;
fh->vbi_fmt.count[1] = 16;
- videobuf_queue_init(&fh->vbi_q, &vbi_qops,
+ videobuf_queue_pci_init(&fh->vbi_q, &vbi_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VBI_CAPTURE,
V4L2_FIELD_SEQ_TB, // FIXME: does this really work?
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 664280c78ff..f245a3b2ef4 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -594,8 +594,9 @@ static int set_control(struct saa7146_fh *fh, struct v4l2_control *c)
static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *buf)
{
struct pci_dev *pci = dev->pci;
- struct scatterlist *list = buf->vb.dma.sglist;
- int length = buf->vb.dma.sglen;
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+ struct scatterlist *list = dma->sglist;
+ int length = dma->sglen;
struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
DEB_EE(("dev:%p, buf:%p, sg_len:%d\n",dev,buf,length));
@@ -655,7 +656,7 @@ static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *bu
/* if we have a user buffer, the first page may not be
aligned to a page boundary. */
- pt1->offset = buf->vb.dma.sglist->offset;
+ pt1->offset = list->offset;
pt2->offset = pt1->offset+o1;
pt3->offset = pt1->offset+o2;
@@ -1211,6 +1212,8 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
mutex_unlock(&q->lock);
return err;
}
+
+ gbuffers = err;
memset(mbuf,0,sizeof(*mbuf));
mbuf->frames = gbuffers;
mbuf->size = gbuffers * gbufsize;
@@ -1411,7 +1414,7 @@ static int video_open(struct saa7146_dev *dev, struct file *file)
sfmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
fh->video_fmt.sizeimage = (fh->video_fmt.width * fh->video_fmt.height * sfmt->depth)/8;
- videobuf_queue_init(&fh->video_q, &video_qops,
+ videobuf_queue_pci_init(&fh->video_q, &video_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index df72b4b8ee1..eca602d9b3d 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -28,7 +28,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <asm/io.h>
diff --git a/drivers/media/dvb/bt8xx/bt878.h b/drivers/media/dvb/bt8xx/bt878.h
index f685bc12960..d593bc14562 100644
--- a/drivers/media/dvb/bt8xx/bt878.h
+++ b/drivers/media/dvb/bt8xx/bt878.h
@@ -149,11 +149,10 @@ void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin,
void bt878_stop(struct bt878 *bt);
#if defined(__powerpc__) /* big-endian */
-extern __inline__ void io_st_le32(volatile unsigned __iomem *addr, unsigned val)
+static inline void io_st_le32(volatile unsigned __iomem *addr, unsigned val)
{
- __asm__ __volatile__("stwbrx %1,0,%2":"=m"(*addr):"r"(val),
- "r"(addr));
- __asm__ __volatile__("eieio":::"memory");
+ st_le32(addr, val);
+ eieio();
}
#define bmtwrite(dat,adr) io_st_le32((adr),(dat))
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 67613eb6fa3..dedd30a8356 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -21,7 +21,6 @@
#include <linux/bitops.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/device.h>
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 28929b618e2..5a12b567955 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -548,19 +548,19 @@ static unsigned int cinergyt2_poll (struct file *file, struct poll_table_struct
{
struct dvb_device *dvbdev = file->private_data;
struct cinergyt2 *cinergyt2 = dvbdev->priv;
- unsigned int mask = 0;
+ unsigned int mask = 0;
if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
poll_wait(file, &cinergyt2->poll_wq, wait);
- if (cinergyt2->pending_fe_events != 0)
+ if (cinergyt2->pending_fe_events != 0)
mask |= (POLLIN | POLLRDNORM | POLLPRI);
mutex_unlock(&cinergyt2->sem);
- return mask;
+ return mask;
}
@@ -1008,6 +1008,8 @@ static int cinergyt2_suspend (struct usb_interface *intf, pm_message_t state)
cinergyt2_sleep(cinergyt2, 1);
mutex_unlock(&cinergyt2->sem);
+ mutex_unlock(&cinergyt2->wq_sem);
+
return 0;
}
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 5394de2e4ce..f94bc31e3b3 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -24,7 +24,6 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/poll.h>
#include <linux/ioctl.h>
#include <linux/wait.h>
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
index 4fadddb264d..084a508a03d 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
@@ -32,11 +32,11 @@
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
+#include <linux/kthread.h>
#include "dvb_ca_en50221.h"
#include "dvb_ringbuffer.h"
@@ -140,13 +140,7 @@ struct dvb_ca_private {
wait_queue_head_t wait_queue;
/* PID of the monitoring thread */
- pid_t thread_pid;
-
- /* Wait queue used when shutting thread down */
- wait_queue_head_t thread_queue;
-
- /* Flag indicating when thread should exit */
- unsigned int exit:1;
+ struct task_struct *thread;
/* Flag indicating if the CA device is open */
unsigned int open:1;
@@ -902,28 +896,10 @@ static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca)
ca->wakeup = 1;
mb();
- wake_up_interruptible(&ca->thread_queue);
+ wake_up_process(ca->thread);
}
/**
- * Used by the CA thread to determine if an early wakeup is necessary
- *
- * @param ca CA instance.
- */
-static int dvb_ca_en50221_thread_should_wakeup(struct dvb_ca_private *ca)
-{
- if (ca->wakeup) {
- ca->wakeup = 0;
- return 1;
- }
- if (ca->exit)
- return 1;
-
- return 0;
-}
-
-
-/**
* Update the delay used by the thread.
*
* @param ca CA instance.
@@ -982,7 +958,6 @@ static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca)
static int dvb_ca_en50221_thread(void *data)
{
struct dvb_ca_private *ca = data;
- char name[15];
int slot;
int flags;
int status;
@@ -991,28 +966,17 @@ static int dvb_ca_en50221_thread(void *data)
dprintk("%s\n", __FUNCTION__);
- /* setup kernel thread */
- snprintf(name, sizeof(name), "kdvb-ca-%i:%i", ca->dvbdev->adapter->num, ca->dvbdev->id);
-
- lock_kernel();
- daemonize(name);
- sigfillset(&current->blocked);
- unlock_kernel();
-
/* choose the correct initial delay */
dvb_ca_en50221_thread_update_delay(ca);
/* main loop */
- while (!ca->exit) {
+ while (!kthread_should_stop()) {
/* sleep for a bit */
- if (!ca->wakeup) {
- flags = wait_event_interruptible_timeout(ca->thread_queue,
- dvb_ca_en50221_thread_should_wakeup(ca),
- ca->delay);
- if ((flags == -ERESTARTSYS) || ca->exit) {
- /* got signal or quitting */
- break;
- }
+ while (!ca->wakeup) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(ca->delay);
+ if (kthread_should_stop())
+ return 0;
}
ca->wakeup = 0;
@@ -1181,10 +1145,6 @@ static int dvb_ca_en50221_thread(void *data)
}
}
- /* completed */
- ca->thread_pid = 0;
- mb();
- wake_up_interruptible(&ca->thread_queue);
return 0;
}
@@ -1536,8 +1496,10 @@ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
return -EIO;
err = dvb_generic_open(inode, file);
- if (err < 0)
+ if (err < 0) {
+ module_put(ca->pub->owner);
return err;
+ }
for (i = 0; i < ca->slot_count; i++) {
@@ -1570,7 +1532,7 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
{
struct dvb_device *dvbdev = file->private_data;
struct dvb_ca_private *ca = dvbdev->priv;
- int err = 0;
+ int err;
dprintk("%s\n", __FUNCTION__);
@@ -1582,7 +1544,7 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
module_put(ca->pub->owner);
- return 0;
+ return err;
}
@@ -1682,9 +1644,6 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
goto error;
}
init_waitqueue_head(&ca->wait_queue);
- ca->thread_pid = 0;
- init_waitqueue_head(&ca->thread_queue);
- ca->exit = 0;
ca->open = 0;
ca->wakeup = 0;
ca->next_read_slot = 0;
@@ -1710,14 +1669,14 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
mb();
/* create a kthread for monitoring this CA device */
-
- ret = kernel_thread(dvb_ca_en50221_thread, ca, 0);
-
- if (ret < 0) {
- printk("dvb_ca_init: failed to start kernel_thread (%d)\n", ret);
+ ca->thread = kthread_run(dvb_ca_en50221_thread, ca, "kdvb-ca-%i:%i",
+ ca->dvbdev->adapter->num, ca->dvbdev->id);
+ if (IS_ERR(ca->thread)) {
+ ret = PTR_ERR(ca->thread);
+ printk("dvb_ca_init: failed to start kernel_thread (%d)\n",
+ ret);
goto error;
}
- ca->thread_pid = ret;
return 0;
error:
@@ -1748,17 +1707,7 @@ void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
dprintk("%s\n", __FUNCTION__);
/* shutdown the thread if there was one */
- if (ca->thread_pid) {
- if (kill_proc(ca->thread_pid, 0, 1) == -ESRCH) {
- printk("dvb_ca_release adapter %d: thread PID %d already died\n",
- ca->dvbdev->adapter->num, ca->thread_pid);
- } else {
- ca->exit = 1;
- mb();
- dvb_ca_en50221_thread_wakeup(ca);
- wait_event_interruptible(ca->thread_queue, ca->thread_pid == 0);
- }
- }
+ kthread_stop(ca->thread);
for (i = 0; i < ca->slot_count; i++) {
dvb_ca_en50221_slot_shutdown(ca, i);
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index cb6987fce26..7959020f931 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -373,13 +373,10 @@ static inline void dvb_dmx_swfilter_packet_type(struct dvb_demux_feed *feed,
static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf)
{
struct dvb_demux_feed *feed;
- struct list_head *pos, *head = &demux->feed_list;
u16 pid = ts_pid(buf);
int dvr_done = 0;
- list_for_each(pos, head) {
- feed = list_entry(pos, struct dvb_demux_feed, list_head);
-
+ list_for_each_entry(feed, &demux->feed_list, list_head) {
if ((feed->pid != pid) && (feed->pid != 0x2000))
continue;
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index b6c7f6610ec..b203640ef1c 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -32,7 +32,6 @@
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/list.h>
#include <linux/freezer.h>
#include <linux/jiffies.h>
@@ -43,7 +42,7 @@
#include "dvbdev.h"
static int dvb_frontend_debug;
-static int dvb_shutdown_timeout = 5;
+static int dvb_shutdown_timeout;
static int dvb_force_auto_inversion;
static int dvb_override_tune_delay;
static int dvb_powerdown_on_sleep = 1;
@@ -138,7 +137,7 @@ static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status)
dprintk ("%s\n", __FUNCTION__);
- if (down_interruptible (&events->sem))
+ if (mutex_lock_interruptible (&events->mtx))
return;
wp = (events->eventw + 1) % MAX_EVENT;
@@ -159,7 +158,7 @@ static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status)
events->eventw = wp;
- up (&events->sem);
+ mutex_unlock(&events->mtx);
e->status = status;
@@ -197,7 +196,7 @@ static int dvb_frontend_get_event(struct dvb_frontend *fe,
return ret;
}
- if (down_interruptible (&events->sem))
+ if (mutex_lock_interruptible (&events->mtx))
return -ERESTARTSYS;
memcpy (event, &events->events[events->eventr],
@@ -205,7 +204,7 @@ static int dvb_frontend_get_event(struct dvb_frontend *fe,
events->eventr = (events->eventr + 1) % MAX_EVENT;
- up (&events->sem);
+ mutex_unlock(&events->mtx);
return 0;
}
@@ -574,10 +573,9 @@ restart:
dvb_frontend_swzigzag(fe);
}
- if (dvb_shutdown_timeout) {
- if (dvb_powerdown_on_sleep)
- if (fe->ops.set_voltage)
- fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF);
+ if (dvb_powerdown_on_sleep) {
+ if (fe->ops.set_voltage)
+ fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF);
if (fe->ops.tuner_ops.sleep) {
fe->ops.tuner_ops.sleep(fe);
if (fe->ops.i2c_gate_ctrl)
@@ -697,6 +695,65 @@ static int dvb_frontend_start(struct dvb_frontend *fe)
return 0;
}
+static void dvb_frontend_get_frequeny_limits(struct dvb_frontend *fe,
+ u32 *freq_min, u32 *freq_max)
+{
+ *freq_min = max(fe->ops.info.frequency_min, fe->ops.tuner_ops.info.frequency_min);
+
+ if (fe->ops.info.frequency_max == 0)
+ *freq_max = fe->ops.tuner_ops.info.frequency_max;
+ else if (fe->ops.tuner_ops.info.frequency_max == 0)
+ *freq_max = fe->ops.info.frequency_max;
+ else
+ *freq_max = min(fe->ops.info.frequency_max, fe->ops.tuner_ops.info.frequency_max);
+
+ if (*freq_min == 0 || *freq_max == 0)
+ printk(KERN_WARNING "DVB: frontend %u frequency limits undefined - fix the driver\n",
+ fe->dvb->num);
+}
+
+static int dvb_frontend_check_parameters(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *parms)
+{
+ u32 freq_min;
+ u32 freq_max;
+
+ /* range check: frequency */
+ dvb_frontend_get_frequeny_limits(fe, &freq_min, &freq_max);
+ if ((freq_min && parms->frequency < freq_min) ||
+ (freq_max && parms->frequency > freq_max)) {
+ printk(KERN_WARNING "DVB: frontend %u frequency %u out of range (%u..%u)\n",
+ fe->dvb->num, parms->frequency, freq_min, freq_max);
+ return -EINVAL;
+ }
+
+ /* range check: symbol rate */
+ if (fe->ops.info.type == FE_QPSK) {
+ if ((fe->ops.info.symbol_rate_min &&
+ parms->u.qpsk.symbol_rate < fe->ops.info.symbol_rate_min) ||
+ (fe->ops.info.symbol_rate_max &&
+ parms->u.qpsk.symbol_rate > fe->ops.info.symbol_rate_max)) {
+ printk(KERN_WARNING "DVB: frontend %u symbol rate %u out of range (%u..%u)\n",
+ fe->dvb->num, parms->u.qpsk.symbol_rate,
+ fe->ops.info.symbol_rate_min, fe->ops.info.symbol_rate_max);
+ return -EINVAL;
+ }
+
+ } else if (fe->ops.info.type == FE_QAM) {
+ if ((fe->ops.info.symbol_rate_min &&
+ parms->u.qam.symbol_rate < fe->ops.info.symbol_rate_min) ||
+ (fe->ops.info.symbol_rate_max &&
+ parms->u.qam.symbol_rate > fe->ops.info.symbol_rate_max)) {
+ printk(KERN_WARNING "DVB: frontend %u symbol rate %u out of range (%u..%u)\n",
+ fe->dvb->num, parms->u.qam.symbol_rate,
+ fe->ops.info.symbol_rate_min, fe->ops.info.symbol_rate_max);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, void *parg)
{
@@ -707,7 +764,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
dprintk ("%s\n", __FUNCTION__);
- if (!fe || fepriv->exit)
+ if (fepriv->exit)
return -ENODEV;
if ((file->f_flags & O_ACCMODE) == O_RDONLY &&
@@ -722,6 +779,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
case FE_GET_INFO: {
struct dvb_frontend_info* info = parg;
memcpy(info, &fe->ops.info, sizeof(struct dvb_frontend_info));
+ dvb_frontend_get_frequeny_limits(fe, &info->frequency_min, &info->frequency_max);
/* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't
* do it, it is done for it. */
@@ -883,6 +941,11 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
case FE_SET_FRONTEND: {
struct dvb_frontend_tune_settings fetunesettings;
+ if (dvb_frontend_check_parameters(fe, parg) < 0) {
+ err = -EINVAL;
+ break;
+ }
+
memcpy (&fepriv->parameters, parg,
sizeof (struct dvb_frontend_parameters));
@@ -992,18 +1055,15 @@ static int dvb_frontend_open(struct inode *inode, struct file *file)
dprintk ("%s\n", __FUNCTION__);
- if ((ret = dvb_generic_open (inode, file)) < 0)
- return ret;
-
- if (fe->ops.ts_bus_ctrl) {
- if ((ret = fe->ops.ts_bus_ctrl (fe, 1)) < 0) {
- dvb_generic_release (inode, file);
+ if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) {
+ if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0)
return ret;
- }
}
- if ((file->f_flags & O_ACCMODE) != O_RDONLY) {
+ if ((ret = dvb_generic_open (inode, file)) < 0)
+ goto err1;
+ if ((file->f_flags & O_ACCMODE) != O_RDONLY) {
/* normal tune mode when opened R/W */
fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT;
fepriv->tone = -1;
@@ -1011,13 +1071,20 @@ static int dvb_frontend_open(struct inode *inode, struct file *file)
ret = dvb_frontend_start (fe);
if (ret)
- dvb_generic_release (inode, file);
+ goto err2;
/* empty event queue */
fepriv->events.eventr = fepriv->events.eventw = 0;
}
return ret;
+
+err2:
+ dvb_generic_release(inode, file);
+err1:
+ if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl)
+ fe->ops.ts_bus_ctrl(fe, 0);
+ return ret;
}
static int dvb_frontend_release(struct inode *inode, struct file *file)
@@ -1032,16 +1099,18 @@ static int dvb_frontend_release(struct inode *inode, struct file *file)
if ((file->f_flags & O_ACCMODE) != O_RDONLY)
fepriv->release_jiffies = jiffies;
- if (fe->ops.ts_bus_ctrl)
- fe->ops.ts_bus_ctrl (fe, 0);
-
ret = dvb_generic_release (inode, file);
- if (dvbdev->users==-1 && fepriv->exit==1) {
- fops_put(file->f_op);
- file->f_op = NULL;
- wake_up(&dvbdev->wait_queue);
+ if (dvbdev->users == -1) {
+ if (fepriv->exit == 1) {
+ fops_put(file->f_op);
+ file->f_op = NULL;
+ wake_up(&dvbdev->wait_queue);
+ }
+ if (fe->ops.ts_bus_ctrl)
+ fe->ops.ts_bus_ctrl(fe, 0);
}
+
return ret;
}
@@ -1080,7 +1149,7 @@ int dvb_register_frontend(struct dvb_adapter* dvb,
init_MUTEX (&fepriv->sem);
init_waitqueue_head (&fepriv->wait_queue);
init_waitqueue_head (&fepriv->events.wait_queue);
- init_MUTEX (&fepriv->events.sem);
+ mutex_init(&fepriv->events.mtx);
fe->dvb = dvb;
fepriv->inversion = INVERSION_OFF;
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index a770a87b9a9..a5262e852c8 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -35,6 +35,7 @@
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/delay.h>
+#include <linux/mutex.h>
#include <linux/dvb/frontend.h>
@@ -61,6 +62,13 @@ struct dvb_tuner_info {
u32 bandwidth_step;
};
+struct analog_parameters {
+ unsigned int frequency;
+ unsigned int mode;
+ unsigned int audmode;
+ u64 std;
+};
+
struct dvb_tuner_ops {
struct dvb_tuner_info info;
@@ -71,6 +79,7 @@ struct dvb_tuner_ops {
/** This is for simple PLLs - set all parameters in one go. */
int (*set_params)(struct dvb_frontend *fe, struct dvb_frontend_parameters *p);
+ int (*set_analog_params)(struct dvb_frontend *fe, struct analog_parameters *p);
/** This is support for demods like the mt352 - fills out the supplied buffer with what to write. */
int (*calc_regs)(struct dvb_frontend *fe, struct dvb_frontend_parameters *p, u8 *buf, int buf_len);
@@ -79,7 +88,9 @@ struct dvb_tuner_ops {
int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth);
#define TUNER_STATUS_LOCKED 1
+#define TUNER_STATUS_STEREO 2
int (*get_status)(struct dvb_frontend *fe, u32 *status);
+ int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength);
/** These are provided seperately from set_params in order to facilitate silicon
* tuners which require sophisticated tuning loops, controlling each parameter seperately. */
@@ -142,7 +153,7 @@ struct dvb_fe_events {
int eventr;
int overflow;
wait_queue_head_t wait_queue;
- struct semaphore sem;
+ struct mutex mtx;
};
struct dvb_frontend {
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index bdd797071cb..2117377c141 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -357,11 +357,6 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
static unsigned char *ule_where = ule_hist, ule_dump = 0;
#endif
- if (dev == NULL) {
- printk( KERN_ERR "NO netdev struct!\n" );
- return;
- }
-
/* For all TS cells in current buffer.
* Appearently, we are called for every single TS cell.
*/
@@ -800,8 +795,8 @@ static int dvb_net_ts_callback(const u8 *buffer1, size_t buffer1_len,
}
-static void dvb_net_sec(struct net_device *dev, const u8 *pkt, int
-pkt_len)
+static void dvb_net_sec(struct net_device *dev,
+ const u8 *pkt, int pkt_len)
{
u8 *eth;
struct sk_buff *skb;
@@ -1446,18 +1441,9 @@ static int dvb_net_close(struct inode *inode, struct file *file)
struct dvb_device *dvbdev = file->private_data;
struct dvb_net *dvbnet = dvbdev->priv;
- if (!dvbdev)
- return -ENODEV;
-
- if ((file->f_flags & O_ACCMODE) == O_RDONLY) {
- dvbdev->readers++;
- } else {
- dvbdev->writers++;
- }
-
- dvbdev->users++;
+ dvb_generic_release(inode, file);
- if(dvbdev->users == 1 && dvbnet->exit==1) {
+ if(dvbdev->users == 1 && dvbnet->exit == 1) {
fops_put(file->f_op);
file->f_op = NULL;
wake_up(&dvbdev->wait_queue);
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index 9ef0c00605e..56231d8edc0 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -25,7 +25,6 @@
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -59,18 +58,13 @@ static struct class *dvb_class;
static struct dvb_device* dvbdev_find_device (int minor)
{
- struct list_head *entry;
+ struct dvb_adapter *adap;
- list_for_each (entry, &dvb_adapter_list) {
- struct list_head *entry0;
- struct dvb_adapter *adap;
- adap = list_entry (entry, struct dvb_adapter, list_head);
- list_for_each (entry0, &adap->device_list) {
- struct dvb_device *dev;
- dev = list_entry (entry0, struct dvb_device, list_head);
+ list_for_each_entry(adap, &dvb_adapter_list, list_head) {
+ struct dvb_device *dev;
+ list_for_each_entry(dev, &adap->device_list, list_head)
if (nums2minor(adap->num, dev->type, dev->id) == minor)
return dev;
- }
}
return NULL;
@@ -180,13 +174,10 @@ static int dvbdev_get_free_id (struct dvb_adapter *adap, int type)
u32 id = 0;
while (id < DVB_MAX_IDS) {
- struct list_head *entry;
- list_for_each (entry, &adap->device_list) {
- struct dvb_device *dev;
- dev = list_entry (entry, struct dvb_device, list_head);
+ struct dvb_device *dev;
+ list_for_each_entry(dev, &adap->device_list, list_head)
if (dev->type == type && dev->id == id)
goto skip;
- }
return id;
skip:
id++;
@@ -200,7 +191,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
{
struct dvb_device *dvbdev;
struct file_operations *dvbdevfops;
- struct class_device *clsdev;
+ struct device *clsdev;
int id;
mutex_lock(&dvbdev_register_lock);
@@ -242,10 +233,9 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
mutex_unlock(&dvbdev_register_lock);
- clsdev = class_device_create(dvb_class, NULL, MKDEV(DVB_MAJOR,
- nums2minor(adap->num, type, id)),
- adap->device, "dvb%d.%s%d", adap->num,
- dnames[type], id);
+ clsdev = device_create(dvb_class, adap->device,
+ MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)),
+ "dvb%d.%s%d", adap->num, dnames[type], id);
if (IS_ERR(clsdev)) {
printk(KERN_ERR "%s: failed to create device dvb%d.%s%d (%ld)\n",
__FUNCTION__, adap->num, dnames[type], id, PTR_ERR(clsdev));
@@ -266,8 +256,8 @@ void dvb_unregister_device(struct dvb_device *dvbdev)
if (!dvbdev)
return;
- class_device_destroy(dvb_class, MKDEV(DVB_MAJOR, nums2minor(dvbdev->adapter->num,
- dvbdev->type, dvbdev->id)));
+ device_destroy(dvb_class, MKDEV(DVB_MAJOR, nums2minor(dvbdev->adapter->num,
+ dvbdev->type, dvbdev->id)));
list_del (&dvbdev->list_head);
kfree (dvbdev->fops);
@@ -281,13 +271,10 @@ static int dvbdev_get_free_adapter_num (void)
int num = 0;
while (num < DVB_MAX_ADAPTERS) {
- struct list_head *entry;
- list_for_each (entry, &dvb_adapter_list) {
- struct dvb_adapter *adap;
- adap = list_entry (entry, struct dvb_adapter, list_head);
+ struct dvb_adapter *adap;
+ list_for_each_entry(adap, &dvb_adapter_list, list_head)
if (adap->num == num)
goto skip;
- }
return num;
skip:
num++;
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 40e41f2f5af..d73934dd4c5 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -74,6 +74,8 @@ config DVB_USB_DIB0700
select DVB_DIB7000M
select DVB_DIB3000MC
select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_MT2266 if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_DIB0070
help
Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
USB bridge is also present in devices having the DiB7700 DVB-T-USB
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index cda3adea24f..4a903ea9589 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -30,17 +30,19 @@ extern int dvb_usb_dib0700_debug;
// 1 Byte: 4MSB(1 = enable streaming, 0 = disable streaming) 4LSB(Video Mode: 0 = MPEG2 188Bytes, 1 = Analog)
// 2 Byte: MPEG2 mode: 4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1)
// 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines) 4LSB( " " )
+#define REQUEST_SET_RC 0x11
#define REQUEST_GET_VERSION 0x15
struct dib0700_state {
u8 channel_state;
u16 mt2060_if1[2];
-
+ u8 rc_toggle;
u8 is_dib7000pc;
};
extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
+extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen);
extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw);
extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
extern struct i2c_algorithm dib0700_i2c_algo;
@@ -50,5 +52,4 @@ extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device
extern int dib0700_device_count;
extern struct dvb_usb_device_properties dib0700_devices[];
extern struct usb_device_id dib0700_usb_id_table[];
-
#endif
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index dddf164f269..3ea294eb96b 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -13,6 +13,10 @@ int dvb_usb_dib0700_debug;
module_param_named(debug,dvb_usb_dib0700_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info,2=fw,4=fwdata,8=data (or-able))." DVB_USB_DEBUG_STATUS);
+static int dvb_usb_dib0700_ir_proto = 1;
+module_param(dvb_usb_dib0700_ir_proto, int, 0644);
+MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (default), 2=RC6).");
+
/* expecting rx buffer: request data[0] data[1] ... data[2] */
static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
{
@@ -32,7 +36,7 @@ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
}
/* expecting tx buffer: request data[0] ... data[n] (n <= 4) */
-static int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen)
+int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen)
{
u16 index, value;
int status;
@@ -260,14 +264,29 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
return dib0700_ctrl_wr(adap->dev, b, 4);
}
+static int dib0700_rc_setup(struct dvb_usb_device *d)
+{
+ u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0};
+ int i = dib0700_ctrl_wr(d, rc_setup, 3);
+ if (i<0) {
+ err("ir protocol setup failed");
+ return -1;
+ }
+ return 0;
+}
+
static int dib0700_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int i;
+ struct dvb_usb_device *dev;
for (i = 0; i < dib0700_device_count; i++)
- if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE, NULL) == 0)
+ if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE, &dev) == 0)
+ {
+ dib0700_rc_setup(dev);
return 0;
+ }
return -ENODEV;
}
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 2208757d901..e8c4a869453 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -4,7 +4,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * Copyright (C) 2005-6 DiBcom, SA
+ * Copyright (C) 2005-7 DiBcom, SA
*/
#include "dib0700.h"
@@ -12,13 +12,19 @@
#include "dib7000m.h"
#include "dib7000p.h"
#include "mt2060.h"
+#include "mt2266.h"
+#include "dib0070.h"
static int force_lna_activation;
module_param(force_lna_activation, int, 0644);
MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
"if applicable for the device (default: 0=automatic/off).");
-/* Hauppauge Nova-T 500
+struct dib0700_adapter_state {
+ int (*set_param_save) (struct dvb_frontend *, struct dvb_frontend_parameters *);
+};
+
+/* Hauppauge Nova-T 500 (aka Bristol)
* has a LNA on GPIO0 which is enabled by setting 1 */
static struct mt2060_config bristol_mt2060_config[2] = {
{
@@ -96,6 +102,321 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
st->mt2060_if1[adap->id]) == NULL ? -ENODEV : 0;
}
+/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
+
+/* MT226x */
+static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
+ {
+ BAND_UHF, // band_caps
+
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+ (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup
+
+ 1130, // inv_gain
+ 21, // time_stabiliz
+
+ 0, // alpha_level
+ 118, // thlock
+
+ 0, // wbd_inv
+ 3530, // wbd_ref
+ 1, // wbd_sel
+ 0, // wbd_alpha
+
+ 65535, // agc1_max
+ 33770, // agc1_min
+ 65535, // agc2_max
+ 23592, // agc2_min
+
+ 0, // agc1_pt1
+ 62, // agc1_pt2
+ 255, // agc1_pt3
+ 64, // agc1_slope1
+ 64, // agc1_slope2
+ 132, // agc2_pt1
+ 192, // agc2_pt2
+ 80, // agc2_slope1
+ 80, // agc2_slope2
+
+ 17, // alpha_mant
+ 27, // alpha_exp
+ 23, // beta_mant
+ 51, // beta_exp
+
+ 1, // perform_agc_softsplit
+ }, {
+ BAND_VHF | BAND_LBAND, // band_caps
+
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+ (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
+
+ 2372, // inv_gain
+ 21, // time_stabiliz
+
+ 0, // alpha_level
+ 118, // thlock
+
+ 0, // wbd_inv
+ 3530, // wbd_ref
+ 1, // wbd_sel
+ 0, // wbd_alpha
+
+ 65535, // agc1_max
+ 0, // agc1_min
+ 65535, // agc2_max
+ 23592, // agc2_min
+
+ 0, // agc1_pt1
+ 128, // agc1_pt2
+ 128, // agc1_pt3
+ 128, // agc1_slope1
+ 0, // agc1_slope2
+ 128, // agc2_pt1
+ 253, // agc2_pt2
+ 81, // agc2_slope1
+ 0, // agc2_slope2
+
+ 17, // alpha_mant
+ 27, // alpha_exp
+ 23, // beta_mant
+ 51, // beta_exp
+
+ 1, // perform_agc_softsplit
+ }
+};
+
+static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
+ 60000, 30000, // internal, sampling
+ 1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
+ 0, 0, 1, 1, 2, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
+ (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
+ 0, // ifreq
+ 20452225, // timf
+};
+
+static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
+ { .output_mpeg2_in_188_bytes = 1,
+ .hostbus_diversity = 1,
+ .tuner_is_baseband = 1,
+
+ .agc_config_count = 2,
+ .agc = stk7700d_7000p_mt2266_agc_config,
+ .bw = &stk7700d_mt2266_pll_config,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+ },
+ { .output_mpeg2_in_188_bytes = 1,
+ .hostbus_diversity = 1,
+ .tuner_is_baseband = 1,
+
+ .agc_config_count = 2,
+ .agc = stk7700d_7000p_mt2266_agc_config,
+ .bw = &stk7700d_mt2266_pll_config,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+ }
+};
+
+static struct mt2266_config stk7700d_mt2266_config[2] = {
+ { .i2c_address = 0x60
+ },
+ { .i2c_address = 0x60
+ }
+};
+
+static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ if (adap->id == 0) {
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+ dib7000p_i2c_enumeration(&adap->dev->i2c_adap,2,18,stk7700d_dib7000p_mt2266_config);
+ }
+
+ adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1),
+ &stk7700d_dib7000p_mt2266_config[adap->id]);
+
+ return adap->fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct i2c_adapter *tun_i2c;
+ tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+ return dvb_attach(mt2266_attach, adap->fe, tun_i2c,
+ &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;;
+}
+
+#define DEFAULT_RC_INTERVAL 150
+
+static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
+
+static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+ u8 key[4];
+ int i;
+ struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+ struct dib0700_state *st = d->priv;
+ *event = 0;
+ *state = REMOTE_NO_KEY_PRESSED;
+ i=dib0700_ctrl_rd(d,rc_request,2,key,4);
+ if (i<=0) {
+ err("RC Query Failed");
+ return -1;
+ }
+ if (key[0]==0 && key[1]==0 && key[2]==0 && key[3]==0) return 0;
+ if (key[3-1]!=st->rc_toggle) {
+ for (i=0;i<d->props.rc_key_map_size; i++) {
+ if (keymap[i].custom == key[3-2] && keymap[i].data == key[3-3]) {
+ *event = keymap[i].event;
+ *state = REMOTE_KEY_PRESSED;
+ st->rc_toggle=key[3-1];
+ return 0;
+ }
+ }
+ err("Unknown remote controller key : %2X %2X",(int)key[3-2],(int)key[3-3]);
+ }
+ return 0;
+}
+
+static struct dvb_usb_rc_key dib0700_rc_keys[] = {
+ /* Key codes for the tiny Pinnacle remote*/
+ { 0x07, 0x00, KEY_MUTE },
+ { 0x07, 0x01, KEY_MENU }, // Pinnacle logo
+ { 0x07, 0x39, KEY_POWER },
+ { 0x07, 0x03, KEY_VOLUMEUP },
+ { 0x07, 0x09, KEY_VOLUMEDOWN },
+ { 0x07, 0x06, KEY_CHANNELUP },
+ { 0x07, 0x0c, KEY_CHANNELDOWN },
+ { 0x07, 0x0f, KEY_1 },
+ { 0x07, 0x15, KEY_2 },
+ { 0x07, 0x10, KEY_3 },
+ { 0x07, 0x18, KEY_4 },
+ { 0x07, 0x1b, KEY_5 },
+ { 0x07, 0x1e, KEY_6 },
+ { 0x07, 0x11, KEY_7 },
+ { 0x07, 0x21, KEY_8 },
+ { 0x07, 0x12, KEY_9 },
+ { 0x07, 0x27, KEY_0 },
+ { 0x07, 0x24, KEY_SCREEN }, // 'Square' key
+ { 0x07, 0x2a, KEY_TEXT }, // 'T' key
+ { 0x07, 0x2d, KEY_REWIND },
+ { 0x07, 0x30, KEY_PLAY },
+ { 0x07, 0x33, KEY_FASTFORWARD },
+ { 0x07, 0x36, KEY_RECORD },
+ { 0x07, 0x3c, KEY_STOP },
+ { 0x07, 0x3f, KEY_CANCEL }, // '?' key
+ /* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */
+ { 0xeb, 0x01, KEY_POWER },
+ { 0xeb, 0x02, KEY_1 },
+ { 0xeb, 0x03, KEY_2 },
+ { 0xeb, 0x04, KEY_3 },
+ { 0xeb, 0x05, KEY_4 },
+ { 0xeb, 0x06, KEY_5 },
+ { 0xeb, 0x07, KEY_6 },
+ { 0xeb, 0x08, KEY_7 },
+ { 0xeb, 0x09, KEY_8 },
+ { 0xeb, 0x0a, KEY_9 },
+ { 0xeb, 0x0b, KEY_VIDEO },
+ { 0xeb, 0x0c, KEY_0 },
+ { 0xeb, 0x0d, KEY_REFRESH },
+ { 0xeb, 0x0f, KEY_EPG },
+ { 0xeb, 0x10, KEY_UP },
+ { 0xeb, 0x11, KEY_LEFT },
+ { 0xeb, 0x12, KEY_OK },
+ { 0xeb, 0x13, KEY_RIGHT },
+ { 0xeb, 0x14, KEY_DOWN },
+ { 0xeb, 0x16, KEY_INFO },
+ { 0xeb, 0x17, KEY_RED },
+ { 0xeb, 0x18, KEY_GREEN },
+ { 0xeb, 0x19, KEY_YELLOW },
+ { 0xeb, 0x1a, KEY_BLUE },
+ { 0xeb, 0x1b, KEY_CHANNELUP },
+ { 0xeb, 0x1c, KEY_VOLUMEUP },
+ { 0xeb, 0x1d, KEY_MUTE },
+ { 0xeb, 0x1e, KEY_VOLUMEDOWN },
+ { 0xeb, 0x1f, KEY_CHANNELDOWN },
+ { 0xeb, 0x40, KEY_PAUSE },
+ { 0xeb, 0x41, KEY_HOME },
+ { 0xeb, 0x42, KEY_MENU }, /* DVD Menu */
+ { 0xeb, 0x43, KEY_SUBTITLE },
+ { 0xeb, 0x44, KEY_TEXT }, /* Teletext */
+ { 0xeb, 0x45, KEY_DELETE },
+ { 0xeb, 0x46, KEY_TV },
+ { 0xeb, 0x47, KEY_DVD },
+ { 0xeb, 0x48, KEY_STOP },
+ { 0xeb, 0x49, KEY_VIDEO },
+ { 0xeb, 0x4a, KEY_AUDIO }, /* Music */
+ { 0xeb, 0x4b, KEY_SCREEN }, /* Pic */
+ { 0xeb, 0x4c, KEY_PLAY },
+ { 0xeb, 0x4d, KEY_BACK },
+ { 0xeb, 0x4e, KEY_REWIND },
+ { 0xeb, 0x4f, KEY_FASTFORWARD },
+ { 0xeb, 0x54, KEY_PREVIOUS },
+ { 0xeb, 0x58, KEY_RECORD },
+ { 0xeb, 0x5c, KEY_NEXT },
+
+ /* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */
+ { 0x1e, 0x00, KEY_0 },
+ { 0x1e, 0x01, KEY_1 },
+ { 0x1e, 0x02, KEY_2 },
+ { 0x1e, 0x03, KEY_3 },
+ { 0x1e, 0x04, KEY_4 },
+ { 0x1e, 0x05, KEY_5 },
+ { 0x1e, 0x06, KEY_6 },
+ { 0x1e, 0x07, KEY_7 },
+ { 0x1e, 0x08, KEY_8 },
+ { 0x1e, 0x09, KEY_9 },
+ { 0x1e, 0x0a, KEY_KPASTERISK },
+ { 0x1e, 0x0b, KEY_RED },
+ { 0x1e, 0x0c, KEY_RADIO },
+ { 0x1e, 0x0d, KEY_MENU },
+ { 0x1e, 0x0e, KEY_GRAVE }, /* # */
+ { 0x1e, 0x0f, KEY_MUTE },
+ { 0x1e, 0x10, KEY_VOLUMEUP },
+ { 0x1e, 0x11, KEY_VOLUMEDOWN },
+ { 0x1e, 0x12, KEY_CHANNEL },
+ { 0x1e, 0x14, KEY_UP },
+ { 0x1e, 0x15, KEY_DOWN },
+ { 0x1e, 0x16, KEY_LEFT },
+ { 0x1e, 0x17, KEY_RIGHT },
+ { 0x1e, 0x18, KEY_VIDEO },
+ { 0x1e, 0x19, KEY_AUDIO },
+ { 0x1e, 0x1a, KEY_MEDIA },
+ { 0x1e, 0x1b, KEY_EPG },
+ { 0x1e, 0x1c, KEY_TV },
+ { 0x1e, 0x1e, KEY_NEXT },
+ { 0x1e, 0x1f, KEY_BACK },
+ { 0x1e, 0x20, KEY_CHANNELUP },
+ { 0x1e, 0x21, KEY_CHANNELDOWN },
+ { 0x1e, 0x24, KEY_LAST }, /* Skip backwards */
+ { 0x1e, 0x25, KEY_OK },
+ { 0x1e, 0x29, KEY_BLUE},
+ { 0x1e, 0x2e, KEY_GREEN },
+ { 0x1e, 0x30, KEY_PAUSE },
+ { 0x1e, 0x32, KEY_REWIND },
+ { 0x1e, 0x34, KEY_FASTFORWARD },
+ { 0x1e, 0x35, KEY_PLAY },
+ { 0x1e, 0x36, KEY_STOP },
+ { 0x1e, 0x37, KEY_RECORD },
+ { 0x1e, 0x38, KEY_YELLOW },
+ { 0x1e, 0x3b, KEY_GOTO },
+ { 0x1e, 0x3d, KEY_POWER },
+};
+
/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
BAND_UHF | BAND_VHF, // band_caps
@@ -194,6 +515,7 @@ static struct dibx000_bandwidth_config stk7700p_pll_config = {
(3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
60258167, // ifreq
20452225, // timf
+ 30000000, // xtal
};
static struct dib7000m_config stk7700p_dib7000m_config = {
@@ -213,6 +535,7 @@ static struct dib7000m_config stk7700p_dib7000m_config = {
static struct dib7000p_config stk7700p_dib7000p_config = {
.output_mpeg2_in_188_bytes = 1,
+ .agc_config_count = 1,
.agc = &stk7700p_7000p_mt2060_agc_config,
.bw = &stk7700p_pll_config,
@@ -267,27 +590,245 @@ static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
st->mt2060_if1[0]) == NULL ? -ENODEV : 0;
}
+/* DIB7070 generic */
+static struct dibx000_agc_config dib7070_agc_config = {
+ BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+ (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup
+
+ 600, // inv_gain
+ 10, // time_stabiliz
+
+ 0, // alpha_level
+ 118, // thlock
+
+ 0, // wbd_inv
+ 3530, // wbd_ref
+ 1, // wbd_sel
+ 5, // wbd_alpha
+
+ 65535, // agc1_max
+ 0, // agc1_min
+
+ 65535, // agc2_max
+ 0, // agc2_min
+
+ 0, // agc1_pt1
+ 40, // agc1_pt2
+ 183, // agc1_pt3
+ 206, // agc1_slope1
+ 255, // agc1_slope2
+ 72, // agc2_pt1
+ 152, // agc2_pt2
+ 88, // agc2_slope1
+ 90, // agc2_slope2
+
+ 17, // alpha_mant
+ 27, // alpha_exp
+ 23, // beta_mant
+ 51, // beta_exp
+
+ 0, // perform_agc_softsplit
+};
+
+static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+ return dib7000p_set_gpio(fe, 8, 0, !onoff);
+}
+
+static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+ return dib7000p_set_gpio(fe, 9, 0, onoff);
+}
+
+static struct dib0070_config dib7070p_dib0070_config[2] = {
+ {
+ .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+ .reset = dib7070_tuner_reset,
+ .sleep = dib7070_tuner_sleep,
+ .clock_khz = 12000,
+ .clock_pad_drive = 4
+ }, {
+ .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+ .reset = dib7070_tuner_reset,
+ .sleep = dib7070_tuner_sleep,
+ .clock_khz = 12000,
+
+ }
+};
+
+static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ u16 offset;
+ u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
+ switch (band) {
+ case BAND_VHF: offset = 950; break;
+ case BAND_UHF:
+ default: offset = 550; break;
+ }
+ deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
+ dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+ return state->set_param_save(fe, fep);
+}
+
+static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+ if (adap->id == 0) {
+ if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
+ return -ENODEV;
+ } else {
+ if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
+ return -ENODEV;
+ }
+
+ st->set_param_save = adap->fe->ops.tuner_ops.set_params;
+ adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override;
+ return 0;
+}
+
+static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
+ 60000, 15000, // internal, sampling
+ 1, 20, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
+ 0, 0, 1, 1, 2, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
+ (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
+ (0 << 25) | 0, // ifreq = 0.000000 MHz
+ 20452225, // timf
+ 12000000, // xtal_hz
+};
+
+static struct dib7000p_config dib7070p_dib7000p_config = {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+};
+
+/* STK7070P */
+static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, &dib7070p_dib7000p_config);
+
+ adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &dib7070p_dib7000p_config);
+ return adap->fe == NULL ? -ENODEV : 0;
+}
+
+/* STK7070PD */
+static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
+ {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ }, {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ }
+};
+
+static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
+{
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, stk7070pd_dib7000p_config);
+
+ adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
+ return adap->fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
+{
+ adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
+ return adap->fe == NULL ? -ENODEV : 0;
+}
+
+/* DVB-USB and USB stuff follows */
struct usb_device_id dib0700_usb_id_table[] = {
- { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
+/* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
- { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
+/* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
{ USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
{ USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
- { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
- { } /* Terminating entry */
+/* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) },
+ { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) },
+/* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
+ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) },
+/* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) },
+ { 0 } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
#define DIB0700_DEFAULT_DEVICE_PROPERTIES \
.caps = DVB_USB_IS_AN_I2C_ADAPTER, \
.usb_ctrl = DEVICE_SPECIFIC, \
- .firmware = "dvb-usb-dib0700-01.fw", \
+ .firmware = "dvb-usb-dib0700-03-pre1.fw", \
.download_firmware = dib0700_download_firmware, \
.no_reconnect = 1, \
.size_of_priv = sizeof(struct dib0700_state), \
@@ -321,7 +862,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
},
},
- .num_device_descs = 6,
+ .num_device_descs = 7,
.devices = {
{ "DiBcom STK7700P reference design",
{ &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
@@ -336,7 +877,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
{ NULL },
},
{ "Compro Videomate U500",
- { &dib0700_usb_id_table[6], NULL },
+ { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] },
{ NULL },
},
{ "Uniwill STK7700P based (Hama and others)",
@@ -346,8 +887,17 @@ struct dvb_usb_device_properties dib0700_devices[] = {
{ "Leadtek Winfast DTV Dongle (STK7700P based)",
{ &dib0700_usb_id_table[8], NULL },
{ NULL },
+ },
+ { "AVerMedia AVerTV DVB-T Express",
+ { &dib0700_usb_id_table[20] },
+ { NULL },
}
- }
+ },
+
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_key_map = dib0700_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
+ .rc_query = dib0700_rc_query
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 2,
@@ -371,8 +921,112 @@ struct dvb_usb_device_properties dib0700_devices[] = {
{ &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
{ NULL },
},
+ },
+
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_key_map = dib0700_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
+ .rc_query = dib0700_rc_query
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 2,
+ .adapter = {
+ {
+ .frontend_attach = stk7700d_frontend_attach,
+ .tuner_attach = stk7700d_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }, {
+ .frontend_attach = stk7700d_frontend_attach,
+ .tuner_attach = stk7700d_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ }
+ },
+
+ .num_device_descs = 4,
+ .devices = {
+ { "Pinnacle PCTV 2000e",
+ { &dib0700_usb_id_table[11], NULL },
+ { NULL },
+ },
+ { "Terratec Cinergy DT XS Diversity",
+ { &dib0700_usb_id_table[12], NULL },
+ { NULL },
+ },
+ { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
+ { &dib0700_usb_id_table[13], NULL },
+ { NULL },
+ },
+ { "DiBcom STK7700D reference design",
+ { &dib0700_usb_id_table[14], NULL },
+ { NULL },
+ },
+ },
+
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_key_map = dib0700_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
+ .rc_query = dib0700_rc_query
+
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .frontend_attach = stk7070p_frontend_attach,
+ .tuner_attach = dib7070p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+ .size_of_priv = sizeof(struct dib0700_adapter_state),
+ },
+ },
+
+ .num_device_descs = 2,
+ .devices = {
+ { "DiBcom STK7070P reference design",
+ { &dib0700_usb_id_table[15], NULL },
+ { NULL },
+ },
+ { "Pinnacle PCTV DVB-T Flash Stick",
+ { &dib0700_usb_id_table[16], NULL },
+ { NULL },
+ },
}
- }
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 2,
+ .adapter = {
+ {
+ .frontend_attach = stk7070pd_frontend_attach0,
+ .tuner_attach = dib7070p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+ .size_of_priv = sizeof(struct dib0700_adapter_state),
+ }, {
+ .frontend_attach = stk7070pd_frontend_attach1,
+ .tuner_attach = dib7070p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+
+ .size_of_priv = sizeof(struct dib0700_adapter_state),
+ }
+ },
+
+ .num_device_descs = 2,
+ .devices = {
+ { "DiBcom STK7070PD reference design",
+ { &dib0700_usb_id_table[17], NULL },
+ { NULL },
+ },
+ { "Pinnacle PCTV Dual DVB-T Diversity Stick",
+ { &dib0700_usb_id_table[18], NULL },
+ { NULL },
+ },
+ }
+ },
};
int dib0700_device_count = ARRAY_SIZE(dib0700_devices);
diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c
index 7dbe1432101..d86cf9bee91 100644
--- a/drivers/media/dvb/dvb-usb/dtt200u.c
+++ b/drivers/media/dvb/dvb-usb/dtt200u.c
@@ -1,5 +1,5 @@
/* DVB USB library compliant Linux driver for the WideView/ Yakumo/ Hama/
- * Typhoon/ Yuan DVB-T USB2.0 receiver.
+ * Typhoon/ Yuan/ Miglia DVB-T USB2.0 receiver.
*
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
*
@@ -96,6 +96,7 @@ static struct dvb_usb_device_properties dtt200u_properties;
static struct dvb_usb_device_properties wt220u_fc_properties;
static struct dvb_usb_device_properties wt220u_properties;
static struct dvb_usb_device_properties wt220u_zl0353_properties;
+static struct dvb_usb_device_properties wt220u_miglia_properties;
static int dtt200u_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -103,7 +104,8 @@ static int dtt200u_usb_probe(struct usb_interface *intf,
if (dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE,NULL) == 0 ||
dvb_usb_device_init(intf,&wt220u_properties,THIS_MODULE,NULL) == 0 ||
dvb_usb_device_init(intf,&wt220u_fc_properties,THIS_MODULE,NULL) == 0 ||
- dvb_usb_device_init(intf,&wt220u_zl0353_properties,THIS_MODULE,NULL) == 0)
+ dvb_usb_device_init(intf,&wt220u_zl0353_properties,THIS_MODULE,NULL) == 0 ||
+ dvb_usb_device_init(intf,&wt220u_miglia_properties,THIS_MODULE,NULL) == 0)
return 0;
return -ENODEV;
@@ -119,6 +121,7 @@ static struct usb_device_id dtt200u_usb_table [] = {
{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_FC_COLD) },
{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_FC_WARM) },
{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_ZAP250_COLD) },
+ { USB_DEVICE(USB_VID_MIGLIA, USB_PID_WT220U_ZAP250_COLD) },
{ 0 },
};
MODULE_DEVICE_TABLE(usb, dtt200u_usb_table);
@@ -303,6 +306,25 @@ static struct dvb_usb_device_properties wt220u_zl0353_properties = {
}
};
+static struct dvb_usb_device_properties wt220u_miglia_properties = {
+ .usb_ctrl = CYPRESS_FX2,
+ .firmware = "dvb-usb-wt220u-miglia-01.fw",
+
+ .num_adapters = 1,
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .num_device_descs = 1,
+ .devices = {
+ { .name = "WideView WT-220U PenType Receiver (Miglia)",
+ .cold_ids = { &dtt200u_usb_table[9], NULL },
+ /* This device turns into WT220U_ZL0353_WARM when fw
+ has been uploaded */
+ .warm_ids = { NULL },
+ },
+ { NULL },
+ }
+};
+
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver dtt200u_usb_driver = {
.name = "dvb_usb_dtt200u",
@@ -333,6 +355,6 @@ module_init(dtt200u_usb_module_init);
module_exit(dtt200u_usb_module_exit);
MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("Driver for the WideView/Yakumo/Hama/Typhoon/Club3D DVB-T USB2.0 devices");
+MODULE_DESCRIPTION("Driver for the WideView/Yakumo/Hama/Typhoon/Club3D/Miglia DVB-T USB2.0 devices");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 4dfab02a8a0..4fa3e895028 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -12,7 +12,7 @@
/* Vendor IDs */
#define USB_VID_ADSTECH 0x06e1
#define USB_VID_AFATECH 0x15a4
-#define USB_VID_ALCOR_MICRO 0x058f
+#define USB_VID_ALCOR_MICRO 0x058f
#define USB_VID_ALINK 0x05e3
#define USB_VID_ANCHOR 0x0547
#define USB_VID_ANUBIS_ELECTRONIC 0x10fd
@@ -34,6 +34,7 @@
#define USB_VID_LEADTEK 0x0413
#define USB_VID_LITEON 0x04ca
#define USB_VID_MEDION 0x1660
+#define USB_VID_MIGLIA 0x18f3
#define USB_VID_MSI 0x0db0
#define USB_VID_OPERA1 0x695c
#define USB_VID_PINNACLE 0x2304
@@ -58,6 +59,7 @@
#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c
#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d
#define USB_PID_COMPRO_VIDEOMATE_U500 0x1e78
+#define USB_PID_COMPRO_VIDEOMATE_U500_PC 0x1e80
#define USB_PID_DIBCOM_HOOK_DEFAULT 0x0064
#define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM 0x0065
#define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8
@@ -66,6 +68,9 @@
#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7
#define USB_PID_DIBCOM_STK7700P 0x1e14
#define USB_PID_DIBCOM_STK7700P_PC 0x1e78
+#define USB_PID_DIBCOM_STK7700D 0x1ef0
+#define USB_PID_DIBCOM_STK7070P 0x1ebc
+#define USB_PID_DIBCOM_STK7070PD 0x1ebe
#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131
#define USB_PID_DPOSH_M9206_COLD 0x9206
#define USB_PID_DPOSH_M9206_WARM 0xa090
@@ -115,8 +120,17 @@
#define USB_PID_HAUPPAUGE_NOVA_T_500_2 0x9950
#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050
#define USB_PID_HAUPPAUGE_NOVA_T_STICK_2 0x7060
+#define USB_PID_HAUPPAUGE_NOVA_TD_STICK 0x9580
+#define USB_PID_AVERMEDIA_EXPRESS 0xb568
#define USB_PID_AVERMEDIA_VOLAR 0xa807
#define USB_PID_AVERMEDIA_VOLAR_2 0xb808
+#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a
+#define USB_PID_PINNACLE_PCTV2000E 0x022c
+#define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228
+#define USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T 0x0229
+#define USB_PID_PCTV_200E 0x020e
+#define USB_PID_PCTV_400E 0x020f
+#define USB_PID_PCTV_450E 0x0222
#define USB_PID_NEBULA_DIGITV 0x0201
#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820
#define USB_PID_DVICO_BLUEBIRD_LG064F_COLD 0xd500
@@ -136,9 +150,6 @@
#define USB_PID_MSI_MEGASKY580_55801 0x5581
#define USB_PID_KYE_DVB_T_COLD 0x701e
#define USB_PID_KYE_DVB_T_WARM 0x701f
-#define USB_PID_PCTV_200E 0x020e
-#define USB_PID_PCTV_400E 0x020f
-#define USB_PID_PCTV_450E 0x0222
#define USB_PID_LITEON_DVB_T_COLD 0xf000
#define USB_PID_LITEON_DVB_T_WARM 0xf001
#define USB_PID_DIGIVOX_MINI_SL_COLD 0xe360
@@ -148,8 +159,11 @@
#define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025
#define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026
#define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00
-#define USB_PID_GENPIX_8PSK_COLD 0x0200
-#define USB_PID_GENPIX_8PSK_WARM 0x0201
+#define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200
+#define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201
+#define USB_PID_GENPIX_8PSK_REV_2 0x0202
+#define USB_PID_GENPIX_SKYWALKER_1 0x0203
+#define USB_PID_GENPIX_SKYWALKER_CW3K 0x0204
#define USB_PID_SIGMATEK_DVB_110 0x6610
#define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513
#define USB_PID_OPERA1_COLD 0x2830
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
index ffdde83d1e7..cdd717c3fe4 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
@@ -24,7 +24,7 @@ MODULE_PARM_DESC(disable_rc_polling, "disable remote control polling (default: 0
static int dvb_usb_force_pid_filter_usage;
module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444);
-MODULE_PARM_DESC(disable_rc_polling, "force all dvb-usb-devices to use a PID filter, if any (default: 0).");
+MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0).");
static int dvb_usb_adapter_init(struct dvb_usb_device *d)
{
diff --git a/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb/dvb-usb/gp8psk-fe.c
index 6ccbdc9cd77..e37142d9271 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk-fe.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk-fe.c
@@ -1,7 +1,8 @@
/* DVB USB compliant Linux driver for the
- * - GENPIX 8pks/qpsk USB2.0 DVB-S module
+ * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
*
- * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
+ * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
+ * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com)
*
* Thanks to GENPIX for the sample code used to implement this module.
*
@@ -17,27 +18,39 @@
struct gp8psk_fe_state {
struct dvb_frontend fe;
-
struct dvb_usb_device *d;
-
+ u8 lock;
u16 snr;
-
- unsigned long next_snr_check;
+ unsigned long next_status_check;
+ unsigned long status_check_interval;
};
+static int gp8psk_fe_update_status(struct gp8psk_fe_state *st)
+{
+ u8 buf[6];
+ if (time_after(jiffies,st->next_status_check)) {
+ gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0,0,&st->lock,1);
+ gp8psk_usb_in_op(st->d, GET_SIGNAL_STRENGTH, 0,0,buf,6);
+ st->snr = (buf[1]) << 8 | buf[0];
+ st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000;
+ }
+ return 0;
+}
+
static int gp8psk_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
{
struct gp8psk_fe_state *st = fe->demodulator_priv;
- u8 lock;
+ gp8psk_fe_update_status(st);
- if (gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0, 0, &lock,1))
- return -EINVAL;
-
- if (lock)
+ if (st->lock)
*status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER;
else
*status = 0;
+ if (*status & FE_HAS_LOCK)
+ st->status_check_interval = 1000;
+ else
+ st->status_check_interval = 100;
return 0;
}
@@ -60,33 +73,29 @@ static int gp8psk_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
static int gp8psk_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
{
struct gp8psk_fe_state *st = fe->demodulator_priv;
- u8 buf[2];
-
- if (time_after(jiffies,st->next_snr_check)) {
- gp8psk_usb_in_op(st->d,GET_SIGNAL_STRENGTH,0,0,buf,2);
- *snr = (int)(buf[1]) << 8 | buf[0];
- /* snr is reported in dBu*256 */
- /* snr / 38.4 ~= 100% strength */
- /* snr * 17 returns 100% strength as 65535 */
- if (*snr <= 3855)
- *snr = (*snr<<4) + *snr; // snr * 17
- else
- *snr = 65535;
- st->next_snr_check = jiffies + (10*HZ)/1000;
- } else {
- *snr = st->snr;
- }
+ gp8psk_fe_update_status(st);
+ /* snr is reported in dBu*256 */
+ *snr = st->snr;
return 0;
}
static int gp8psk_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
{
- return gp8psk_fe_read_snr(fe, strength);
+ struct gp8psk_fe_state *st = fe->demodulator_priv;
+ gp8psk_fe_update_status(st);
+ /* snr is reported in dBu*256 */
+ /* snr / 38.4 ~= 100% strength */
+ /* snr * 17 returns 100% strength as 65535 */
+ if (st->snr > 0xf00)
+ *strength = 0xffff;
+ else
+ *strength = (st->snr << 4) + st->snr; /* snr*17 */
+ return 0;
}
static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
{
- tune->min_delay_ms = 800;
+ tune->min_delay_ms = 200;
return 0;
}
@@ -124,7 +133,9 @@ static int gp8psk_fe_set_frontend(struct dvb_frontend* fe,
gp8psk_usb_out_op(state->d,TUNE_8PSK,0,0,cmd,10);
- state->next_snr_check = jiffies;
+ state->lock = 0;
+ state->next_status_check = jiffies;
+ state->status_check_interval = 200;
return 0;
}
@@ -190,6 +201,12 @@ static int gp8psk_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t volt
return 0;
}
+static int gp8psk_fe_enable_high_lnb_voltage(struct dvb_frontend* fe, long onoff)
+{
+ struct gp8psk_fe_state* state = fe->demodulator_priv;
+ return gp8psk_usb_out_op(state->d, USE_EXTRA_VOLT, onoff, 0,NULL,0);
+}
+
static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd)
{
struct gp8psk_fe_state* state = fe->demodulator_priv;
@@ -235,10 +252,10 @@ success:
static struct dvb_frontend_ops gp8psk_fe_ops = {
.info = {
- .name = "Genpix 8psk-USB DVB-S",
+ .name = "Genpix 8psk-to-USB2 DVB-S",
.type = FE_QPSK,
- .frequency_min = 950000,
- .frequency_max = 2150000,
+ .frequency_min = 800000,
+ .frequency_max = 2250000,
.frequency_stepsize = 100,
.symbol_rate_min = 1000000,
.symbol_rate_max = 45000000,
@@ -269,4 +286,5 @@ static struct dvb_frontend_ops gp8psk_fe_ops = {
.set_tone = gp8psk_fe_set_tone,
.set_voltage = gp8psk_fe_set_voltage,
.dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd,
+ .enable_high_lnb_voltage = gp8psk_fe_enable_high_lnb_voltage
};
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c
index 518d67fca5e..92147ee3e14 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk.c
@@ -1,7 +1,8 @@
/* DVB USB compliant Linux driver for the
- * - GENPIX 8pks/qpsk USB2.0 DVB-S module
+ * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
*
- * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
+ * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
+ * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com)
*
* Thanks to GENPIX for the sample code used to implement this module.
*
@@ -40,7 +41,7 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8
}
if (ret < 0 || ret != blen) {
- warn("usb in operation failed.");
+ warn("usb in %d operation failed.", req);
ret = -EIO;
} else
ret = 0;
@@ -97,10 +98,10 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0))
goto out_rel_fw;
- info("downloaidng bcm4500 firmware from file '%s'",bcm4500_firmware);
+ info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware);
ptr = fw->data;
- buf = kmalloc(512, GFP_KERNEL | GFP_DMA);
+ buf = kmalloc(64, GFP_KERNEL | GFP_DMA);
while (ptr[0] != 0xff) {
u16 buflen = ptr[0] + 4;
@@ -129,25 +130,34 @@ out_rel_fw:
static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
{
u8 status, buf;
+ int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
+
if (onoff) {
gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
- if (! (status & 0x01)) /* started */
+ if (! (status & bm8pskStarted)) { /* started */
+ if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
+ gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0);
if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
return -EINVAL;
+ }
- if (! (status & 0x02)) /* BCM4500 firmware loaded */
- if(gp8psk_load_bcm4500fw(d))
- return EINVAL;
+ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
+ if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */
+ if(gp8psk_load_bcm4500fw(d))
+ return EINVAL;
- if (! (status & 0x04)) /* LNB Power */
+ if (! (status & bmIntersilOn)) /* LNB Power */
if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
&buf, 1))
return EINVAL;
- /* Set DVB mode */
- if(gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
- return -EINVAL;
- gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
+ /* Set DVB mode to 1 */
+ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
+ if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
+ return EINVAL;
+ /* Abort possible TS (if previous tune crashed) */
+ if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0))
+ return EINVAL;
} else {
/* Turn off LNB power */
if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
@@ -155,11 +165,28 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
/* Turn off 8psk power */
if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
return -EINVAL;
-
+ if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
+ gp8psk_usb_out_op(d, CW3K_INIT, 0, 0, NULL, 0);
}
return 0;
}
+int gp8psk_bcm4500_reload(struct dvb_usb_device *d)
+{
+ u8 buf;
+ int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
+ /* Turn off 8psk power */
+ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
+ return -EINVAL;
+ /* Turn On 8psk power */
+ if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
+ return -EINVAL;
+ /* load BCM4500 firmware */
+ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
+ if (gp8psk_load_bcm4500fw(d))
+ return EINVAL;
+ return 0;
+}
static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
@@ -177,12 +204,22 @@ static struct dvb_usb_device_properties gp8psk_properties;
static int gp8psk_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- return dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL);
+ int ret;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ ret = dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL);
+ if (ret == 0) {
+ info("found Genpix USB device pID = %x (hex)",
+ le16_to_cpu(udev->descriptor.idProduct));
+ }
+ return ret;
}
static struct usb_device_id gp8psk_usb_table [] = {
- { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_COLD) },
- { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_WARM) },
+ { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_COLD) },
+ { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) },
+ { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) },
+ { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) },
+ { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) },
{ 0 },
};
MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);
@@ -213,12 +250,24 @@ static struct dvb_usb_device_properties gp8psk_properties = {
.generic_bulk_ctrl_endpoint = 0x01,
- .num_device_descs = 1,
+ .num_device_descs = 4,
.devices = {
- { .name = "Genpix 8PSK-USB DVB-S USB2.0 receiver",
+ { .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver",
.cold_ids = { &gp8psk_usb_table[0], NULL },
.warm_ids = { &gp8psk_usb_table[1], NULL },
},
+ { .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver",
+ .cold_ids = { NULL },
+ .warm_ids = { &gp8psk_usb_table[2], NULL },
+ },
+ { .name = "Genpix SkyWalker-1 DVB-S receiver",
+ .cold_ids = { NULL },
+ .warm_ids = { &gp8psk_usb_table[3], NULL },
+ },
+ { .name = "Genpix SkyWalker-CW3K DVB-S receiver",
+ .cold_ids = { NULL },
+ .warm_ids = { &gp8psk_usb_table[4], NULL },
+ },
{ NULL },
}
};
@@ -253,6 +302,6 @@ module_init(gp8psk_usb_module_init);
module_exit(gp8psk_usb_module_exit);
MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");
-MODULE_DESCRIPTION("Driver for Genpix 8psk-USB DVB-S USB2.0");
-MODULE_VERSION("1.0");
+MODULE_DESCRIPTION("Driver for Genpix 8psk-to-USB2 DVB-S");
+MODULE_VERSION("1.1");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h
index 3eba7061011..e83a57506cf 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.h
+++ b/drivers/media/dvb/dvb-usb/gp8psk.h
@@ -1,7 +1,8 @@
/* DVB USB compliant Linux driver for the
- * - GENPIX 8pks/qpsk USB2.0 DVB-S module
+ * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
*
* Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
+ * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
*
* Thanks to GENPIX for the sample code used to implement this module.
*
@@ -30,21 +31,37 @@ extern int dvb_usb_gp8psk_debug;
#define TH_COMMAND_IN 0xC0
#define TH_COMMAND_OUT 0xC1
-/* command bytes */
-#define GET_8PSK_CONFIG 0x80
+/* gp8psk commands */
+
+#define GET_8PSK_CONFIG 0x80 /* in */
#define SET_8PSK_CONFIG 0x81
+#define I2C_WRITE 0x83
+#define I2C_READ 0x84
#define ARM_TRANSFER 0x85
#define TUNE_8PSK 0x86
-#define GET_SIGNAL_STRENGTH 0x87
+#define GET_SIGNAL_STRENGTH 0x87 /* in */
#define LOAD_BCM4500 0x88
-#define BOOT_8PSK 0x89
-#define START_INTERSIL 0x8A
+#define BOOT_8PSK 0x89 /* in */
+#define START_INTERSIL 0x8A /* in */
#define SET_LNB_VOLTAGE 0x8B
#define SET_22KHZ_TONE 0x8C
#define SEND_DISEQC_COMMAND 0x8D
#define SET_DVB_MODE 0x8E
#define SET_DN_SWITCH 0x8F
-#define GET_SIGNAL_LOCK 0x90
+#define GET_SIGNAL_LOCK 0x90 /* in */
+#define GET_SERIAL_NUMBER 0x93 /* in */
+#define USE_EXTRA_VOLT 0x94
+#define CW3K_INIT 0x9d
+
+/* PSK_configuration bits */
+#define bm8pskStarted 0x01
+#define bm8pskFW_Loaded 0x02
+#define bmIntersilOn 0x04
+#define bmDVBmode 0x08
+#define bm22kHz 0x10
+#define bmSEL18V 0x20
+#define bmDCtuned 0x40
+#define bmArmed 0x80
/* Satellite modulation modes */
#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */
@@ -75,5 +92,6 @@ extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d);
extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
u16 index, u8 *b, int blen);
+extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d);
#endif
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
index 69a46b3607a..5bbd2d5192f 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ b/drivers/media/dvb/dvb-usb/vp7045.c
@@ -159,7 +159,7 @@ static int vp7045_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
return 0;
}
- for (i = 0; i < sizeof(vp7045_rc_keys)/sizeof(struct dvb_usb_rc_key); i++)
+ for (i = 0; i < ARRAY_SIZE(vp7045_rc_keys); i++)
if (vp7045_rc_keys[i].data == key) {
*state = REMOTE_KEY_PRESSED;
*event = vp7045_rc_keys[i].event;
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index ff448761dce..59b9ed1f1ae 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -283,6 +283,14 @@ config DVB_LGDT330X
An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
to support this frontend.
+config DVB_S5H1409
+ tristate "Samsung S5H1409 based"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+ to support this frontend.
+
comment "Tuners/PLL support"
depends on DVB_CORE
@@ -291,7 +299,7 @@ config DVB_PLL
depends on DVB_CORE && I2C
default m if DVB_FE_CUSTOMISE
help
- This module driver a number of tuners based on PLL chips with a
+ This module drives a number of tuners based on PLL chips with a
common I2C interface. Say Y when you want to support these tuners.
config DVB_TDA826X
@@ -322,6 +330,29 @@ config DVB_TUNER_MT2060
help
A driver for the silicon IF tuner MT2060 from Microtune.
+config DVB_TUNER_MT2266
+ tristate "Microtune MT2266 silicon tuner"
+ depends on I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A driver for the silicon baseband tuner MT2266 from Microtune.
+
+config DVB_TUNER_MT2131
+ tristate "Microtune MT2131 silicon tuner"
+ depends on I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A driver for the silicon baseband tuner MT2131 from Microtune.
+
+config DVB_TUNER_DIB0070
+ tristate "DiBcom DiB0070 silicon base-band tuner"
+ depends on I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A driver for the silicon baseband tuner DiB0070 from DiBcom.
+ This device is only used inside a SiP called togther with a
+ demodulator for now.
+
comment "Miscellaneous devices"
depends on DVB_CORE
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 156b062e02c..4b8ad1f132a 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -40,5 +40,9 @@ obj-$(CONFIG_DVB_TDA10086) += tda10086.o
obj-$(CONFIG_DVB_TDA826X) += tda826x.o
obj-$(CONFIG_DVB_TDA827X) += tda827x.o
obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o
+obj-$(CONFIG_DVB_TUNER_MT2266) += mt2266.o
+obj-$(CONFIG_DVB_TUNER_DIB0070) += dib0070.o
obj-$(CONFIG_DVB_TUNER_QT1010) += qt1010.o
obj-$(CONFIG_DVB_TUA6100) += tua6100.o
+obj-$(CONFIG_DVB_TUNER_MT2131) += mt2131.o
+obj-$(CONFIG_DVB_S5H1409) += s5h1409.o
diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
index baeb311de89..a913f49c062 100644
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ b/drivers/media/dvb/frontends/bcm3510.c
@@ -33,7 +33,6 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/jiffies.h>
diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c
index 13ad1bfae66..11a4968f18c 100644
--- a/drivers/media/dvb/frontends/cx22700.c
+++ b/drivers/media/dvb/frontends/cx22700.c
@@ -23,7 +23,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/slab.h>
#include "dvb_frontend.h"
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index 10fc0c8316d..b03d8283c37 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -25,7 +25,6 @@
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include "dvb_frontend.h"
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index 0834c0677fe..d74fdbd6336 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -23,7 +23,6 @@
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include "dvb_frontend.h"
diff --git a/drivers/media/dvb/frontends/dib0070.c b/drivers/media/dvb/frontends/dib0070.c
new file mode 100644
index 00000000000..481eaa68415
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib0070.c
@@ -0,0 +1,580 @@
+/*
+ * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner.
+ *
+ * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include "dvb_frontend.h"
+
+#include "dib0070.h"
+#include "dibx000_common.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB0070: "); printk(args); printk("\n"); } } while (0)
+
+#define DIB0070_P1D 0x00
+#define DIB0070_P1F 0x01
+#define DIB0070_P1G 0x03
+#define DIB0070S_P1A 0x02
+
+struct dib0070_state {
+ struct i2c_adapter *i2c;
+ struct dvb_frontend *fe;
+ const struct dib0070_config *cfg;
+ u16 wbd_ff_offset;
+ u8 revision;
+};
+
+static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg)
+{
+ u8 b[2];
+ struct i2c_msg msg[2] = {
+ { .addr = state->cfg->i2c_address, .flags = 0, .buf = &reg, .len = 1 },
+ { .addr = state->cfg->i2c_address, .flags = I2C_M_RD, .buf = b, .len = 2 },
+ };
+ if (i2c_transfer(state->i2c, msg, 2) != 2) {
+ printk(KERN_WARNING "DiB0070 I2C read failed\n");
+ return 0;
+ }
+ return (b[0] << 8) | b[1];
+}
+
+static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val)
+{
+ u8 b[3] = { reg, val >> 8, val & 0xff };
+ struct i2c_msg msg = { .addr = state->cfg->i2c_address, .flags = 0, .buf = b, .len = 3 };
+ if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "DiB0070 I2C write failed\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+#define HARD_RESET(state) do { if (state->cfg->reset) { state->cfg->reset(state->fe,1); msleep(10); state->cfg->reset(state->fe,0); msleep(10); } } while (0)
+
+static int dib0070_set_bandwidth(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
+{
+ struct dib0070_state *st = fe->tuner_priv;
+ u16 tmp = 0;
+ tmp = dib0070_read_reg(st, 0x02) & 0x3fff;
+
+ switch(BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth)) {
+ case 8000:
+ tmp |= (0 << 14);
+ break;
+ case 7000:
+ tmp |= (1 << 14);
+ break;
+ case 6000:
+ tmp |= (2 << 14);
+ break;
+ case 5000:
+ default:
+ tmp |= (3 << 14);
+ break;
+ }
+ dib0070_write_reg(st, 0x02, tmp);
+ return 0;
+}
+
+static void dib0070_captrim(struct dib0070_state *st, u16 LO4)
+{
+ int8_t captrim, fcaptrim, step_sign, step;
+ u16 adc, adc_diff = 3000;
+
+
+
+ dib0070_write_reg(st, 0x0f, 0xed10);
+ dib0070_write_reg(st, 0x17, 0x0034);
+
+ dib0070_write_reg(st, 0x18, 0x0032);
+ msleep(2);
+
+ step = captrim = fcaptrim = 64;
+
+ do {
+ step /= 2;
+ dib0070_write_reg(st, 0x14, LO4 | captrim);
+ msleep(1);
+ adc = dib0070_read_reg(st, 0x19);
+
+ dprintk( "CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", captrim, adc, (u32) adc*(u32)1800/(u32)1024);
+
+ if (adc >= 400) {
+ adc -= 400;
+ step_sign = -1;
+ } else {
+ adc = 400 - adc;
+ step_sign = 1;
+ }
+
+ if (adc < adc_diff) {
+ dprintk( "CAPTRIM=%hd is closer to target (%hd/%hd)", captrim, adc, adc_diff);
+ adc_diff = adc;
+ fcaptrim = captrim;
+
+
+
+ }
+ captrim += (step_sign * step);
+ } while (step >= 1);
+
+ dib0070_write_reg(st, 0x14, LO4 | fcaptrim);
+ dib0070_write_reg(st, 0x18, 0x07ff);
+}
+
+#define LPF 100 // define for the loop filter 100kHz by default 16-07-06
+#define LO4_SET_VCO_HFDIV(l, v, h) l |= ((v) << 11) | ((h) << 7)
+#define LO4_SET_SD(l, s) l |= ((s) << 14) | ((s) << 12)
+#define LO4_SET_CTRIM(l, c) l |= (c) << 10
+static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
+{
+ struct dib0070_state *st = fe->tuner_priv;
+ u32 freq = ch->frequency/1000 + (BAND_OF_FREQUENCY(ch->frequency/1000) == BAND_VHF ? st->cfg->freq_offset_khz_vhf : st->cfg->freq_offset_khz_uhf);
+
+ u8 band = BAND_OF_FREQUENCY(freq), c;
+
+ /*******************VCO***********************************/
+ u16 lo4 = 0;
+
+ u8 REFDIV, PRESC = 2;
+ u32 FBDiv, Rest, FREF, VCOF_kHz;
+ u16 Num, Den;
+ /*******************FrontEnd******************************/
+ u16 value = 0;
+
+ dprintk( "Tuning for Band: %hd (%d kHz)", band, freq);
+
+
+ dib0070_write_reg(st, 0x17, 0x30);
+
+ dib0070_set_bandwidth(fe, ch); /* c is used as HF */
+ switch (st->revision) {
+ case DIB0070S_P1A:
+ switch (band) {
+ case BAND_LBAND:
+ LO4_SET_VCO_HFDIV(lo4, 1, 1);
+ c = 2;
+ break;
+ case BAND_SBAND:
+ LO4_SET_VCO_HFDIV(lo4, 0, 0);
+ LO4_SET_CTRIM(lo4, 1);;
+ c = 1;
+ break;
+ case BAND_UHF:
+ default:
+ if (freq < 570000) {
+ LO4_SET_VCO_HFDIV(lo4, 1, 3);
+ PRESC = 6; c = 6;
+ } else if (freq < 680000) {
+ LO4_SET_VCO_HFDIV(lo4, 0, 2);
+ c = 4;
+ } else {
+ LO4_SET_VCO_HFDIV(lo4, 1, 2);
+ c = 4;
+ }
+ break;
+ } break;
+
+ case DIB0070_P1G:
+ case DIB0070_P1F:
+ default:
+ switch (band) {
+ case BAND_FM:
+ LO4_SET_VCO_HFDIV(lo4, 0, 7);
+ c = 24;
+ break;
+ case BAND_LBAND:
+ LO4_SET_VCO_HFDIV(lo4, 1, 0);
+ c = 2;
+ break;
+ case BAND_VHF:
+ if (freq < 180000) {
+ LO4_SET_VCO_HFDIV(lo4, 0, 3);
+ c = 16;
+ } else if (freq < 190000) {
+ LO4_SET_VCO_HFDIV(lo4, 1, 3);
+ c = 16;
+ } else {
+ LO4_SET_VCO_HFDIV(lo4, 0, 6);
+ c = 12;
+ }
+ break;
+
+ case BAND_UHF:
+ default:
+ if (freq < 570000) {
+ LO4_SET_VCO_HFDIV(lo4, 1, 5);
+ c = 6;
+ } else if (freq < 700000) {
+ LO4_SET_VCO_HFDIV(lo4, 0, 1);
+ c = 4;
+ } else {
+ LO4_SET_VCO_HFDIV(lo4, 1, 1);
+ c = 4;
+ }
+ break;
+ }
+ break;
+ }
+
+ dprintk( "HFDIV code: %hd", (lo4 >> 7) & 0xf);
+ dprintk( "VCO = %hd", (lo4 >> 11) & 0x3);
+
+
+ VCOF_kHz = (c * freq) * 2;
+ dprintk( "VCOF in kHz: %d ((%hd*%d) << 1))",VCOF_kHz, c, freq);
+
+ switch (band) {
+ case BAND_VHF:
+ REFDIV = (u8) ((st->cfg->clock_khz + 9999) / 10000);
+ break;
+ case BAND_FM:
+ REFDIV = (u8) ((st->cfg->clock_khz) / 1000);
+ break;
+ default:
+ REFDIV = (u8) ( st->cfg->clock_khz / 10000);
+ break;
+ }
+ FREF = st->cfg->clock_khz / REFDIV;
+
+ dprintk( "REFDIV: %hd, FREF: %d", REFDIV, FREF);
+
+
+
+ switch (st->revision) {
+ case DIB0070S_P1A:
+ FBDiv = (VCOF_kHz / PRESC / FREF);
+ Rest = (VCOF_kHz / PRESC) - FBDiv * FREF;
+ break;
+
+ case DIB0070_P1G:
+ case DIB0070_P1F:
+ default:
+ FBDiv = (freq / (FREF / 2));
+ Rest = 2 * freq - FBDiv * FREF;
+ break;
+ }
+
+
+ if (Rest < LPF) Rest = 0;
+ else if (Rest < 2 * LPF) Rest = 2 * LPF;
+ else if (Rest > (FREF - LPF)) { Rest = 0 ; FBDiv += 1; }
+ else if (Rest > (FREF - 2 * LPF)) Rest = FREF - 2 * LPF;
+ Rest = (Rest * 6528) / (FREF / 10);
+ dprintk( "FBDIV: %d, Rest: %d", FBDiv, Rest);
+
+ Num = 0;
+ Den = 1;
+
+ if (Rest > 0) {
+ LO4_SET_SD(lo4, 1);
+ Den = 255;
+ Num = (u16)Rest;
+ }
+ dprintk( "Num: %hd, Den: %hd, SD: %hd",Num, Den, (lo4 >> 12) & 0x1);
+
+
+
+ dib0070_write_reg(st, 0x11, (u16)FBDiv);
+
+
+ dib0070_write_reg(st, 0x12, (Den << 8) | REFDIV);
+
+
+ dib0070_write_reg(st, 0x13, Num);
+
+
+ value = 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001;
+
+ switch (band) {
+ case BAND_UHF: value |= 0x4000 | 0x0800; break;
+ case BAND_LBAND: value |= 0x2000 | 0x0400; break;
+ default: value |= 0x8000 | 0x1000; break;
+ }
+ dib0070_write_reg(st, 0x20, value);
+
+ dib0070_captrim(st, lo4);
+ if (st->revision == DIB0070S_P1A) {
+ if (band == BAND_SBAND)
+ dib0070_write_reg(st, 0x15, 0x16e2);
+ else
+ dib0070_write_reg(st, 0x15, 0x56e5);
+ }
+
+
+
+ switch (band) {
+ case BAND_UHF: value = 0x7c82; break;
+ case BAND_LBAND: value = 0x7c84; break;
+ default: value = 0x7c81; break;
+ }
+ dib0070_write_reg(st, 0x0f, value);
+ dib0070_write_reg(st, 0x06, 0x3fff);
+
+ /* Front End */
+ /* c == TUNE, value = SWITCH */
+ c = 0;
+ value = 0;
+ switch (band) {
+ case BAND_FM:
+ c = 0; value = 1;
+ break;
+
+ case BAND_VHF:
+ if (freq <= 180000) c = 0;
+ else if (freq <= 188200) c = 1;
+ else if (freq <= 196400) c = 2;
+ else c = 3;
+ value = 1;
+ break;
+
+ case BAND_LBAND:
+ if (freq <= 1500000) c = 0;
+ else if (freq <= 1600000) c = 1;
+ else c = 3;
+ break;
+
+ case BAND_SBAND:
+ c = 7;
+ dib0070_write_reg(st, 0x1d,0xFFFF);
+ break;
+
+ case BAND_UHF:
+ default:
+ if (st->cfg->flip_chip) {
+ if (freq <= 550000) c = 0;
+ else if (freq <= 590000) c = 1;
+ else if (freq <= 666000) c = 3;
+ else c = 5;
+ } else {
+ if (freq <= 550000) c = 2;
+ else if (freq <= 650000) c = 3;
+ else if (freq <= 750000) c = 5;
+ else if (freq <= 850000) c = 6;
+ else c = 7;
+ }
+ value = 2;
+ break;
+ }
+
+ /* default: LNA_MATCH=7, BIAS=3 */
+ dib0070_write_reg(st, 0x07, (value << 11) | (7 << 8) | (c << 3) | (3 << 0));
+ dib0070_write_reg(st, 0x08, (c << 10) | (3 << 7) | (127));
+ dib0070_write_reg(st, 0x0d, 0x0d80);
+
+
+ dib0070_write_reg(st, 0x18, 0x07ff);
+ dib0070_write_reg(st, 0x17, 0x0033);
+
+ return 0;
+}
+
+static int dib0070_wakeup(struct dvb_frontend *fe)
+{
+ struct dib0070_state *st = fe->tuner_priv;
+ if (st->cfg->sleep)
+ st->cfg->sleep(fe, 0);
+ return 0;
+}
+
+static int dib0070_sleep(struct dvb_frontend *fe)
+{
+ struct dib0070_state *st = fe->tuner_priv;
+ if (st->cfg->sleep)
+ st->cfg->sleep(fe, 1);
+ return 0;
+}
+
+static u16 dib0070_p1f_defaults[] =
+
+{
+ 7, 0x02,
+ 0x0008,
+ 0x0000,
+ 0x0000,
+ 0x0000,
+ 0x0000,
+ 0x0002,
+ 0x0100,
+
+ 3, 0x0d,
+ 0x0d80,
+ 0x0001,
+ 0x0000,
+
+ 4, 0x11,
+ 0x0000,
+ 0x0103,
+ 0x0000,
+ 0x0000,
+
+ 3, 0x16,
+ 0x0004 | 0x0040,
+ 0x0030,
+ 0x07ff,
+
+ 6, 0x1b,
+ 0x4112,
+ 0xff00,
+ 0xc07f,
+ 0x0000,
+ 0x0180,
+ 0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001,
+
+ 0,
+};
+
+static void dib0070_wbd_calibration(struct dib0070_state *state)
+{
+ u16 wbd_offs;
+ dib0070_write_reg(state, 0x0f, 0x6d81);
+ dib0070_write_reg(state, 0x20, 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001);
+ msleep(9);
+ wbd_offs = dib0070_read_reg(state, 0x19);
+ dib0070_write_reg(state, 0x20, 0);
+ state->wbd_ff_offset = ((wbd_offs * 8 * 18 / 33 + 1) / 2);
+ dprintk( "WBDStart = %d (Vargen) - FF = %hd", (u32) wbd_offs * 1800/1024, state->wbd_ff_offset);
+}
+
+u16 dib0070_wbd_offset(struct dvb_frontend *fe)
+{
+ struct dib0070_state *st = fe->tuner_priv;
+ return st->wbd_ff_offset;
+}
+
+EXPORT_SYMBOL(dib0070_wbd_offset);
+static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt)
+{
+ struct dib0070_state *state = fe->tuner_priv;
+ u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0);
+ dprintk( "CTRL_LO5: 0x%x", lo5);
+ return dib0070_write_reg(state, 0x15, lo5);
+}
+
+#define pgm_read_word(w) (*w)
+static int dib0070_reset(struct dib0070_state *state)
+{
+ u16 l, r, *n;
+
+ HARD_RESET(state);
+
+
+#ifndef FORCE_SBAND_TUNER
+ if ((dib0070_read_reg(state, 0x22) >> 9) & 0x1)
+ state->revision = (dib0070_read_reg(state, 0x1f) >> 8) & 0xff;
+ else
+#endif
+ state->revision = DIB0070S_P1A;
+
+ /* P1F or not */
+ dprintk( "Revision: %x", state->revision);
+
+ if (state->revision == DIB0070_P1D) {
+ dprintk( "Error: this driver is not to be used meant for P1D or earlier");
+ return -EINVAL;
+ }
+
+ n = (u16 *) dib0070_p1f_defaults;
+ l = pgm_read_word(n++);
+ while (l) {
+ r = pgm_read_word(n++);
+ do {
+ dib0070_write_reg(state, (u8)r, pgm_read_word(n++));
+ r++;
+ } while (--l);
+ l = pgm_read_word(n++);
+ }
+
+ if (state->cfg->force_crystal_mode != 0)
+ r = state->cfg->force_crystal_mode;
+ else if (state->cfg->clock_khz >= 24000)
+ r = 1;
+ else
+ r = 2;
+
+ r |= state->cfg->osc_buffer_state << 3;
+
+ dib0070_write_reg(state, 0x10, r);
+ dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 4));
+
+ if (state->cfg->invert_iq) {
+ r = dib0070_read_reg(state, 0x02) & 0xffdf;
+ dib0070_write_reg(state, 0x02, r | (1 << 5));
+ }
+
+
+ if (state->revision == DIB0070S_P1A)
+ dib0070_set_ctrl_lo5(state->fe, 4, 7, 3, 1);
+ else
+ dib0070_set_ctrl_lo5(state->fe, 4, 4, 2, 0);
+
+ dib0070_write_reg(state, 0x01, (54 << 9) | 0xc8);
+ return 0;
+}
+
+
+static int dib0070_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+static struct dvb_tuner_ops dib0070_ops = {
+ .info = {
+ .name = "DiBcom DiB0070",
+ .frequency_min = 45000000,
+ .frequency_max = 860000000,
+ .frequency_step = 1000,
+ },
+ .release = dib0070_release,
+
+ .init = dib0070_wakeup,
+ .sleep = dib0070_sleep,
+ .set_params = dib0070_tune_digital,
+// .get_frequency = dib0070_get_frequency,
+// .get_bandwidth = dib0070_get_bandwidth
+};
+
+struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
+{
+ struct dib0070_state *state = kzalloc(sizeof(struct dib0070_state), GFP_KERNEL);
+ if (state == NULL)
+ return NULL;
+
+ state->cfg = cfg;
+ state->i2c = i2c;
+ state->fe = fe;
+ fe->tuner_priv = state;
+
+ if (dib0070_reset(state) != 0)
+ goto free_mem;
+
+ dib0070_wbd_calibration(state);
+
+ printk(KERN_INFO "DiB0070: successfully identified\n");
+ memcpy(&fe->ops.tuner_ops, &dib0070_ops, sizeof(struct dvb_tuner_ops));
+
+ fe->tuner_priv = state;
+ return fe;
+
+free_mem:
+ kfree(state);
+ fe->tuner_priv = NULL;
+ return NULL;
+}
+EXPORT_SYMBOL(dib0070_attach);
+
+MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_DESCRIPTION("Driver for the DiBcom 0070 base-band RF Tuner");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h
new file mode 100644
index 00000000000..786e37d3388
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib0070.h
@@ -0,0 +1,44 @@
+/*
+ * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner.
+ *
+ * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+#ifndef DIB0070_H
+#define DIB0070_H
+
+struct dvb_frontend;
+struct i2c_adapter;
+
+#define DEFAULT_DIB0070_I2C_ADDRESS 0x60
+
+struct dib0070_config {
+ u8 i2c_address;
+
+ /* tuner pins controlled externally */
+ int (*reset) (struct dvb_frontend *, int);
+ int (*sleep) (struct dvb_frontend *, int);
+
+ /* offset in kHz */
+ int freq_offset_khz_uhf;
+ int freq_offset_khz_vhf;
+
+ u8 osc_buffer_state; /* 0= normal, 1= tri-state */
+ u32 clock_khz;
+ u8 clock_pad_drive; /* (Drive + 1) * 2mA */
+
+ u8 invert_iq; /* invert Q - in case I or Q is inverted on the board */
+
+ u8 force_crystal_mode; /* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */
+
+ u8 flip_chip;
+};
+
+extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg);
+extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open);
+extern u16 dib0070_wbd_offset(struct dvb_frontend *);
+
+#endif
diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c
index b6adea5ffeb..136b9d2164d 100644
--- a/drivers/media/dvb/frontends/dib3000mb.c
+++ b/drivers/media/dvb/frontends/dib3000mb.c
@@ -23,7 +23,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c
index 054d7e6d966..edae0be063f 100644
--- a/drivers/media/dvb/frontends/dib3000mc.c
+++ b/drivers/media/dvb/frontends/dib3000mc.c
@@ -1,7 +1,7 @@
/*
* Driver for DiBcom DiB3000MC/P-demodulator.
*
- * Copyright (C) 2004-6 DiBcom (http://www.dibcom.fr/)
+ * Copyright (C) 2004-7 DiBcom (http://www.dibcom.fr/)
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
*
* This code is partially based on the previous dib3000mc.c .
@@ -13,10 +13,6 @@
#include <linux/kernel.h>
#include <linux/i2c.h>
-//#include <linux/init.h>
-//#include <linux/delay.h>
-//#include <linux/string.h>
-//#include <linux/slab.h>
#include "dvb_frontend.h"
@@ -26,7 +22,11 @@ static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB3000MC/P:"); printk(args); } } while (0)
+static int buggy_sfn_workaround;
+module_param(buggy_sfn_workaround, int, 0644);
+MODULE_PARM_DESC(buggy_sfn_workaround, "Enable work-around for buggy SFNs (default: 0)");
+
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB3000MC/P:"); printk(args); printk("\n"); } } while (0)
struct dib3000mc_state {
struct dvb_frontend demod;
@@ -42,6 +42,8 @@ struct dib3000mc_state {
fe_bandwidth_t current_bandwidth;
u16 dev_id;
+
+ u8 sfn_workaround_active :1;
};
static u16 dib3000mc_read_word(struct dib3000mc_state *state, u16 reg)
@@ -71,7 +73,6 @@ static int dib3000mc_write_word(struct dib3000mc_state *state, u16 reg, u16 val)
return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
}
-
static int dib3000mc_identify(struct dib3000mc_state *state)
{
u16 value;
@@ -92,7 +93,7 @@ static int dib3000mc_identify(struct dib3000mc_state *state)
return 0;
}
-static int dib3000mc_set_timing(struct dib3000mc_state *state, s16 nfft, u8 bw, u8 update_offset)
+static int dib3000mc_set_timing(struct dib3000mc_state *state, s16 nfft, u32 bw, u8 update_offset)
{
u32 timf;
@@ -103,7 +104,7 @@ static int dib3000mc_set_timing(struct dib3000mc_state *state, s16 nfft, u8 bw,
} else
timf = state->timf;
- timf *= (BW_INDEX_TO_KHZ(bw) / 1000);
+ timf *= (bw / 1000);
if (update_offset) {
s16 tim_offs = dib3000mc_read_word(state, 416);
@@ -111,17 +112,17 @@ static int dib3000mc_set_timing(struct dib3000mc_state *state, s16 nfft, u8 bw,
if (tim_offs & 0x2000)
tim_offs -= 0x4000;
- if (nfft == 0)
+ if (nfft == TRANSMISSION_MODE_2K)
tim_offs *= 4;
timf += tim_offs;
- state->timf = timf / (BW_INDEX_TO_KHZ(bw) / 1000);
+ state->timf = timf / (bw / 1000);
}
dprintk("timf: %d\n", timf);
- dib3000mc_write_word(state, 23, timf >> 16);
- dib3000mc_write_word(state, 24, timf & 0xffff);
+ dib3000mc_write_word(state, 23, (u16) (timf >> 16));
+ dib3000mc_write_word(state, 24, (u16) (timf ) & 0xffff);
return 0;
}
@@ -209,31 +210,30 @@ static int dib3000mc_set_output_mode(struct dib3000mc_state *state, int mode)
return ret;
}
-static int dib3000mc_set_bandwidth(struct dvb_frontend *demod, u8 bw)
+static int dib3000mc_set_bandwidth(struct dib3000mc_state *state, u32 bw)
{
- struct dib3000mc_state *state = demod->demodulator_priv;
u16 bw_cfg[6] = { 0 };
u16 imp_bw_cfg[3] = { 0 };
u16 reg;
/* settings here are for 27.7MHz */
switch (bw) {
- case BANDWIDTH_8_MHZ:
+ case 8000:
bw_cfg[0] = 0x0019; bw_cfg[1] = 0x5c30; bw_cfg[2] = 0x0054; bw_cfg[3] = 0x88a0; bw_cfg[4] = 0x01a6; bw_cfg[5] = 0xab20;
imp_bw_cfg[0] = 0x04db; imp_bw_cfg[1] = 0x00db; imp_bw_cfg[2] = 0x00b7;
break;
- case BANDWIDTH_7_MHZ:
+ case 7000:
bw_cfg[0] = 0x001c; bw_cfg[1] = 0xfba5; bw_cfg[2] = 0x0060; bw_cfg[3] = 0x9c25; bw_cfg[4] = 0x01e3; bw_cfg[5] = 0x0cb7;
imp_bw_cfg[0] = 0x04c0; imp_bw_cfg[1] = 0x00c0; imp_bw_cfg[2] = 0x00a0;
break;
- case BANDWIDTH_6_MHZ:
+ case 6000:
bw_cfg[0] = 0x0021; bw_cfg[1] = 0xd040; bw_cfg[2] = 0x0070; bw_cfg[3] = 0xb62b; bw_cfg[4] = 0x0233; bw_cfg[5] = 0x8ed5;
imp_bw_cfg[0] = 0x04a5; imp_bw_cfg[1] = 0x00a5; imp_bw_cfg[2] = 0x0089;
break;
- case 255 /* BANDWIDTH_5_MHZ */:
+ case 5000:
bw_cfg[0] = 0x0028; bw_cfg[1] = 0x9380; bw_cfg[2] = 0x0087; bw_cfg[3] = 0x4100; bw_cfg[4] = 0x02a4; bw_cfg[5] = 0x4500;
imp_bw_cfg[0] = 0x0489; imp_bw_cfg[1] = 0x0089; imp_bw_cfg[2] = 0x0072;
break;
@@ -257,7 +257,7 @@ static int dib3000mc_set_bandwidth(struct dvb_frontend *demod, u8 bw)
dib3000mc_write_word(state, reg, imp_bw_cfg[reg - 55]);
// Timing configuration
- dib3000mc_set_timing(state, 0, bw, 0);
+ dib3000mc_set_timing(state, TRANSMISSION_MODE_2K, bw, 0);
return 0;
}
@@ -276,7 +276,7 @@ static void dib3000mc_set_impulse_noise(struct dib3000mc_state *state, u8 mode,
for (i = 58; i < 87; i++)
dib3000mc_write_word(state, i, impulse_noise_val[i-58]);
- if (nfft == 1) {
+ if (nfft == TRANSMISSION_MODE_8K) {
dib3000mc_write_word(state, 58, 0x3b);
dib3000mc_write_word(state, 84, 0x00);
dib3000mc_write_word(state, 85, 0x8200);
@@ -376,7 +376,7 @@ static int dib3000mc_init(struct dvb_frontend *demod)
// P_search_maxtrial=1
dib3000mc_write_word(state, 5, 1);
- dib3000mc_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ);
+ dib3000mc_set_bandwidth(state, 8000);
// div_lock_mask
dib3000mc_write_word(state, 4, 0x814);
@@ -397,7 +397,7 @@ static int dib3000mc_init(struct dvb_frontend *demod)
dib3000mc_write_word(state, 180, 0x2FF0);
// Impulse noise configuration
- dib3000mc_set_impulse_noise(state, 0, 1);
+ dib3000mc_set_impulse_noise(state, 0, TRANSMISSION_MODE_8K);
// output mode set-up
dib3000mc_set_output_mode(state, OUTMODE_HIGH_Z);
@@ -423,13 +423,13 @@ static void dib3000mc_set_adp_cfg(struct dib3000mc_state *state, s16 qam)
{
u16 cfg[4] = { 0 },reg;
switch (qam) {
- case 0:
+ case QPSK:
cfg[0] = 0x099a; cfg[1] = 0x7fae; cfg[2] = 0x0333; cfg[3] = 0x7ff0;
break;
- case 1:
+ case QAM_16:
cfg[0] = 0x023d; cfg[1] = 0x7fdf; cfg[2] = 0x00a4; cfg[3] = 0x7ff0;
break;
- case 2:
+ case QAM_64:
cfg[0] = 0x0148; cfg[1] = 0x7ff0; cfg[2] = 0x00a4; cfg[3] = 0x7ff8;
break;
}
@@ -437,11 +437,11 @@ static void dib3000mc_set_adp_cfg(struct dib3000mc_state *state, s16 qam)
dib3000mc_write_word(state, reg, cfg[reg - 129]);
}
-static void dib3000mc_set_channel_cfg(struct dib3000mc_state *state, struct dibx000_ofdm_channel *chan, u16 seq)
+static void dib3000mc_set_channel_cfg(struct dib3000mc_state *state, struct dvb_frontend_parameters *ch, u16 seq)
{
- u16 tmp;
-
- dib3000mc_set_timing(state, chan->nfft, chan->Bw, 0);
+ u16 value;
+ dib3000mc_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth));
+ dib3000mc_set_timing(state, ch->u.ofdm.transmission_mode, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth), 0);
// if (boost)
// dib3000mc_write_word(state, 100, (11 << 6) + 6);
@@ -455,7 +455,7 @@ static void dib3000mc_set_channel_cfg(struct dib3000mc_state *state, struct dibx
dib3000mc_write_word(state, 26, 0x6680);
dib3000mc_write_word(state, 29, 0x1273);
dib3000mc_write_word(state, 33, 5);
- dib3000mc_set_adp_cfg(state, 1);
+ dib3000mc_set_adp_cfg(state, QAM_16);
dib3000mc_write_word(state, 133, 15564);
dib3000mc_write_word(state, 12 , 0x0);
@@ -470,52 +470,98 @@ static void dib3000mc_set_channel_cfg(struct dib3000mc_state *state, struct dibx
dib3000mc_write_word(state, 97,0);
dib3000mc_write_word(state, 98,0);
- dib3000mc_set_impulse_noise(state, 0, chan->nfft);
-
- tmp = ((chan->nfft & 0x1) << 7) | (chan->guard << 5) | (chan->nqam << 3) | chan->vit_alpha;
- dib3000mc_write_word(state, 0, tmp);
+ dib3000mc_set_impulse_noise(state, 0, ch->u.ofdm.transmission_mode);
+ value = 0;
+ switch (ch->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_2K: value |= (0 << 7); break;
+ default:
+ case TRANSMISSION_MODE_8K: value |= (1 << 7); break;
+ }
+ switch (ch->u.ofdm.guard_interval) {
+ case GUARD_INTERVAL_1_32: value |= (0 << 5); break;
+ case GUARD_INTERVAL_1_16: value |= (1 << 5); break;
+ case GUARD_INTERVAL_1_4: value |= (3 << 5); break;
+ default:
+ case GUARD_INTERVAL_1_8: value |= (2 << 5); break;
+ }
+ switch (ch->u.ofdm.constellation) {
+ case QPSK: value |= (0 << 3); break;
+ case QAM_16: value |= (1 << 3); break;
+ default:
+ case QAM_64: value |= (2 << 3); break;
+ }
+ switch (HIERARCHY_1) {
+ case HIERARCHY_2: value |= 2; break;
+ case HIERARCHY_4: value |= 4; break;
+ default:
+ case HIERARCHY_1: value |= 1; break;
+ }
+ dib3000mc_write_word(state, 0, value);
dib3000mc_write_word(state, 5, (1 << 8) | ((seq & 0xf) << 4));
- tmp = (chan->vit_hrch << 4) | (chan->vit_select_hp);
- if (!chan->vit_hrch || (chan->vit_hrch && chan->vit_select_hp))
- tmp |= chan->vit_code_rate_hp << 1;
- else
- tmp |= chan->vit_code_rate_lp << 1;
- dib3000mc_write_word(state, 181, tmp);
+ value = 0;
+ if (ch->u.ofdm.hierarchy_information == 1)
+ value |= (1 << 4);
+ if (1 == 1)
+ value |= 1;
+ switch ((ch->u.ofdm.hierarchy_information == 0 || 1 == 1) ? ch->u.ofdm.code_rate_HP : ch->u.ofdm.code_rate_LP) {
+ case FEC_2_3: value |= (2 << 1); break;
+ case FEC_3_4: value |= (3 << 1); break;
+ case FEC_5_6: value |= (5 << 1); break;
+ case FEC_7_8: value |= (7 << 1); break;
+ default:
+ case FEC_1_2: value |= (1 << 1); break;
+ }
+ dib3000mc_write_word(state, 181, value);
- // diversity synchro delay
- tmp = dib3000mc_read_word(state, 180) & 0x000f;
- tmp |= ((chan->nfft == 0) ? 64 : 256) * ((1 << (chan->guard)) * 3 / 2) << 4; // add 50% SFN margin
- dib3000mc_write_word(state, 180, tmp);
+ // diversity synchro delay add 50% SFN margin
+ switch (ch->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_8K: value = 256; break;
+ case TRANSMISSION_MODE_2K:
+ default: value = 64; break;
+ }
+ switch (ch->u.ofdm.guard_interval) {
+ case GUARD_INTERVAL_1_16: value *= 2; break;
+ case GUARD_INTERVAL_1_8: value *= 4; break;
+ case GUARD_INTERVAL_1_4: value *= 8; break;
+ default:
+ case GUARD_INTERVAL_1_32: value *= 1; break;
+ }
+ value <<= 4;
+ value |= dib3000mc_read_word(state, 180) & 0x000f;
+ dib3000mc_write_word(state, 180, value);
// restart demod
- tmp = dib3000mc_read_word(state, 0);
- dib3000mc_write_word(state, 0, tmp | (1 << 9));
- dib3000mc_write_word(state, 0, tmp);
+ value = dib3000mc_read_word(state, 0);
+ dib3000mc_write_word(state, 0, value | (1 << 9));
+ dib3000mc_write_word(state, 0, value);
msleep(30);
- dib3000mc_set_impulse_noise(state, state->cfg->impulse_noise_mode, chan->nfft);
+ dib3000mc_set_impulse_noise(state, state->cfg->impulse_noise_mode, ch->u.ofdm.transmission_mode);
}
-static int dib3000mc_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *chan)
+static int dib3000mc_autosearch_start(struct dvb_frontend *demod, struct dvb_frontend_parameters *chan)
{
struct dib3000mc_state *state = demod->demodulator_priv;
u16 reg;
// u32 val;
- struct dibx000_ofdm_channel fchan;
+ struct dvb_frontend_parameters schan;
- INIT_OFDM_CHANNEL(&fchan);
- fchan = *chan;
+ schan = *chan;
+ /* TODO what is that ? */
/* a channel for autosearch */
- fchan.nfft = 1; fchan.guard = 0; fchan.nqam = 2;
- fchan.vit_alpha = 1; fchan.vit_code_rate_hp = 2; fchan.vit_code_rate_lp = 2;
- fchan.vit_hrch = 0; fchan.vit_select_hp = 1;
+ schan.u.ofdm.transmission_mode = TRANSMISSION_MODE_8K;
+ schan.u.ofdm.guard_interval = GUARD_INTERVAL_1_32;
+ schan.u.ofdm.constellation = QAM_64;
+ schan.u.ofdm.code_rate_HP = FEC_2_3;
+ schan.u.ofdm.code_rate_LP = FEC_2_3;
+ schan.u.ofdm.hierarchy_information = 0;
- dib3000mc_set_channel_cfg(state, &fchan, 11);
+ dib3000mc_set_channel_cfg(state, &schan, 11);
reg = dib3000mc_read_word(state, 0);
dib3000mc_write_word(state, 0, reg | (1 << 8));
@@ -539,7 +585,7 @@ static int dib3000mc_autosearch_is_irq(struct dvb_frontend *demod)
return 0; // still pending
}
-static int dib3000mc_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+static int dib3000mc_tune(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
{
struct dib3000mc_state *state = demod->demodulator_priv;
@@ -547,11 +593,17 @@ static int dib3000mc_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channe
dib3000mc_set_channel_cfg(state, ch, 0);
// activates isi
- dib3000mc_write_word(state, 29, 0x1073);
-
- dib3000mc_set_adp_cfg(state, (u8)ch->nqam);
+ if (state->sfn_workaround_active) {
+ dprintk("SFN workaround is active\n");
+ dib3000mc_write_word(state, 29, 0x1273);
+ dib3000mc_write_word(state, 108, 0x4000); // P_pha3_force_pha_shift
+ } else {
+ dib3000mc_write_word(state, 29, 0x1073);
+ dib3000mc_write_word(state, 108, 0x0000); // P_pha3_force_pha_shift
+ }
- if (ch->nfft == 1) {
+ dib3000mc_set_adp_cfg(state, (u8)ch->u.ofdm.constellation);
+ if (ch->u.ofdm.transmission_mode == TRANSMISSION_MODE_8K) {
dib3000mc_write_word(state, 26, 38528);
dib3000mc_write_word(state, 33, 8);
} else {
@@ -560,7 +612,7 @@ static int dib3000mc_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channe
}
if (dib3000mc_read_word(state, 509) & 0x80)
- dib3000mc_set_timing(state, ch->nfft, ch->Bw, 1);
+ dib3000mc_set_timing(state, ch->u.ofdm.transmission_mode, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth), 1);
return 0;
}
@@ -632,13 +684,12 @@ static int dib3000mc_set_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
struct dib3000mc_state *state = fe->demodulator_priv;
- struct dibx000_ofdm_channel ch;
-
- INIT_OFDM_CHANNEL(&ch);
- FEP2DIB(fep,&ch);
state->current_bandwidth = fep->u.ofdm.bandwidth;
- dib3000mc_set_bandwidth(fe, fep->u.ofdm.bandwidth);
+ dib3000mc_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->u.ofdm.bandwidth));
+
+ /* maybe the parameter has been changed */
+ state->sfn_workaround_active = buggy_sfn_workaround;
if (fe->ops.tuner_ops.set_params) {
fe->ops.tuner_ops.set_params(fe, fep);
@@ -651,7 +702,7 @@ static int dib3000mc_set_frontend(struct dvb_frontend* fe,
fep->u.ofdm.code_rate_HP == FEC_AUTO) {
int i = 100, found;
- dib3000mc_autosearch_start(fe, &ch);
+ dib3000mc_autosearch_start(fe, fep);
do {
msleep(1);
found = dib3000mc_autosearch_is_irq(fe);
@@ -662,13 +713,12 @@ static int dib3000mc_set_frontend(struct dvb_frontend* fe,
return 0; // no channel found
dib3000mc_get_frontend(fe, fep);
- FEP2DIB(fep,&ch);
}
/* make this a config parameter */
dib3000mc_set_output_mode(state, OUTMODE_MPEG2_FIFO);
- return dib3000mc_tune(fe, &ch);
+ return dib3000mc_tune(fe, fep);
}
static int dib3000mc_read_status(struct dvb_frontend *fe, fe_status_t *stat)
diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c
index f64546c6aeb..fb18441a8c5 100644
--- a/drivers/media/dvb/frontends/dib7000m.c
+++ b/drivers/media/dvb/frontends/dib7000m.c
@@ -2,7 +2,7 @@
* Linux-DVB Driver for DiBcom's DiB7000M and
* first generation DiB7000P-demodulator-family.
*
- * Copyright (C) 2005-6 DiBcom (http://www.dibcom.fr/)
+ * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -19,7 +19,7 @@ static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000M:"); printk(args); } } while (0)
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000M: "); printk(args); printk("\n"); } } while (0)
struct dib7000m_state {
struct dvb_frontend demod;
@@ -39,8 +39,16 @@ struct dib7000m_state {
fe_bandwidth_t current_bandwidth;
struct dibx000_agc_config *current_agc;
u32 timf;
+ u32 timf_default;
+ u32 internal_clk;
+
+ u8 div_force_off : 1;
+ u8 div_state : 1;
+ u16 div_sync_wait;
u16 revision;
+
+ u8 agc_state;
};
enum dib7000m_power_mode {
@@ -63,7 +71,7 @@ static u16 dib7000m_read_word(struct dib7000m_state *state, u16 reg)
};
if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
- dprintk("i2c read error on %d\n",reg);
+ dprintk("i2c read error on %d",reg);
return (rb[0] << 8) | rb[1];
}
@@ -79,6 +87,25 @@ static int dib7000m_write_word(struct dib7000m_state *state, u16 reg, u16 val)
};
return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
}
+static void dib7000m_write_tab(struct dib7000m_state *state, u16 *buf)
+{
+ u16 l = 0, r, *n;
+ n = buf;
+ l = *n++;
+ while (l) {
+ r = *n++;
+
+ if (state->reg_offs && (r >= 112 && r <= 331)) // compensate for 7000MC
+ r++;
+
+ do {
+ dib7000m_write_word(state, r, *n++);
+ r++;
+ } while (--l);
+ l = *n++;
+ }
+}
+
static int dib7000m_set_output_mode(struct dib7000m_state *state, int mode)
{
int ret = 0;
@@ -89,8 +116,7 @@ static int dib7000m_set_output_mode(struct dib7000m_state *state, int mode)
fifo_threshold = 1792;
smo_mode = (dib7000m_read_word(state, 294 + state->reg_offs) & 0x0010) | (1 << 1);
- dprintk("-I- Setting output mode for demod %p to %d\n",
- &state->demod, mode);
+ dprintk( "setting output mode for demod %p to %d", &state->demod, mode);
switch (mode) {
case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock
@@ -117,7 +143,7 @@ static int dib7000m_set_output_mode(struct dib7000m_state *state, int mode)
outreg = 0;
break;
default:
- dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod);
+ dprintk( "Unhandled output_mode passed to be set for demod %p",&state->demod);
break;
}
@@ -129,13 +155,20 @@ static int dib7000m_set_output_mode(struct dib7000m_state *state, int mode)
ret |= dib7000m_write_word(state, 1795, outreg);
ret |= dib7000m_write_word(state, 1805, sram);
+ if (state->revision == 0x4003) {
+ u16 clk_cfg1 = dib7000m_read_word(state, 909) & 0xfffd;
+ if (mode == OUTMODE_DIVERSITY)
+ clk_cfg1 |= (1 << 1); // P_O_CLK_en
+ dib7000m_write_word(state, 909, clk_cfg1);
+ }
return ret;
}
-static int dib7000m_set_power_mode(struct dib7000m_state *state, enum dib7000m_power_mode mode)
+static void dib7000m_set_power_mode(struct dib7000m_state *state, enum dib7000m_power_mode mode)
{
/* by default everything is going to be powered off */
u16 reg_903 = 0xffff, reg_904 = 0xffff, reg_905 = 0xffff, reg_906 = 0x3fff;
+ u8 offset = 0;
/* now, depending on the requested mode, we power on */
switch (mode) {
@@ -170,16 +203,17 @@ static int dib7000m_set_power_mode(struct dib7000m_state *state, enum dib7000m_p
if (!state->cfg.mobile_mode)
reg_904 |= (1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) | (1 << 1);
- /* P_sdio_select_clk = 0 on MC */
+ /* P_sdio_select_clk = 0 on MC and after*/
if (state->revision != 0x4000)
reg_906 <<= 1;
- dib7000m_write_word(state, 903, reg_903);
- dib7000m_write_word(state, 904, reg_904);
- dib7000m_write_word(state, 905, reg_905);
- dib7000m_write_word(state, 906, reg_906);
+ if (state->revision == 0x4003)
+ offset = 1;
- return 0;
+ dib7000m_write_word(state, 903 + offset, reg_903);
+ dib7000m_write_word(state, 904 + offset, reg_904);
+ dib7000m_write_word(state, 905 + offset, reg_905);
+ dib7000m_write_word(state, 906 + offset, reg_906);
}
static int dib7000m_set_adc_state(struct dib7000m_state *state, enum dibx000_adc_states no)
@@ -230,34 +264,55 @@ static int dib7000m_set_adc_state(struct dib7000m_state *state, enum dibx000_adc
break;
}
-// dprintk("-D- 913: %x, 914: %x\n", reg_913, reg_914);
-
+// dprintk( "913: %x, 914: %x", reg_913, reg_914);
ret |= dib7000m_write_word(state, 913, reg_913);
ret |= dib7000m_write_word(state, 914, reg_914);
return ret;
}
-static int dib7000m_set_bandwidth(struct dvb_frontend *demod, u8 bw_idx)
+static int dib7000m_set_bandwidth(struct dib7000m_state *state, u32 bw)
{
- struct dib7000m_state *state = demod->demodulator_priv;
u32 timf;
// store the current bandwidth for later use
- state->current_bandwidth = bw_idx;
+ state->current_bandwidth = bw;
if (state->timf == 0) {
- dprintk("-D- Using default timf\n");
- timf = state->cfg.bw->timf;
+ dprintk( "using default timf");
+ timf = state->timf_default;
} else {
- dprintk("-D- Using updated timf\n");
+ dprintk( "using updated timf");
timf = state->timf;
}
- timf = timf * (BW_INDEX_TO_KHZ(bw_idx) / 100) / 80;
+ timf = timf * (bw / 50) / 160;
- dib7000m_write_word(state, 23, (timf >> 16) & 0xffff);
- dib7000m_write_word(state, 24, (timf ) & 0xffff);
+ dib7000m_write_word(state, 23, (u16) ((timf >> 16) & 0xffff));
+ dib7000m_write_word(state, 24, (u16) ((timf ) & 0xffff));
+
+ return 0;
+}
+
+static int dib7000m_set_diversity_in(struct dvb_frontend *demod, int onoff)
+{
+ struct dib7000m_state *state = demod->demodulator_priv;
+
+ if (state->div_force_off) {
+ dprintk( "diversity combination deactivated - forced by COFDM parameters");
+ onoff = 0;
+ }
+ state->div_state = (u8)onoff;
+
+ if (onoff) {
+ dib7000m_write_word(state, 263 + state->reg_offs, 6);
+ dib7000m_write_word(state, 264 + state->reg_offs, 6);
+ dib7000m_write_word(state, 266 + state->reg_offs, (state->div_sync_wait << 4) | (1 << 2) | (2 << 0));
+ } else {
+ dib7000m_write_word(state, 263 + state->reg_offs, 1);
+ dib7000m_write_word(state, 264 + state->reg_offs, 0);
+ dib7000m_write_word(state, 266 + state->reg_offs, 0);
+ }
return 0;
}
@@ -266,7 +321,7 @@ static int dib7000m_sad_calib(struct dib7000m_state *state)
{
/* internal */
-// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is written in set_bandwidth
+// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
dib7000m_write_word(state, 929, (0 << 1) | (0 << 0));
dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096
@@ -281,10 +336,10 @@ static int dib7000m_sad_calib(struct dib7000m_state *state)
static void dib7000m_reset_pll_common(struct dib7000m_state *state, const struct dibx000_bandwidth_config *bw)
{
- dib7000m_write_word(state, 18, ((bw->internal*1000) >> 16) & 0xffff);
- dib7000m_write_word(state, 19, (bw->internal*1000) & 0xffff);
- dib7000m_write_word(state, 21, (bw->ifreq >> 16) & 0xffff);
- dib7000m_write_word(state, 22, bw->ifreq & 0xffff);
+ dib7000m_write_word(state, 18, (u16) (((bw->internal*1000) >> 16) & 0xffff));
+ dib7000m_write_word(state, 19, (u16) ( (bw->internal*1000) & 0xffff));
+ dib7000m_write_word(state, 21, (u16) ( (bw->ifreq >> 16) & 0xffff));
+ dib7000m_write_word(state, 22, (u16) ( bw->ifreq & 0xffff));
dib7000m_write_word(state, 928, bw->sad_cfg);
}
@@ -325,15 +380,19 @@ static void dib7000m_reset_pll(struct dib7000m_state *state)
static void dib7000mc_reset_pll(struct dib7000m_state *state)
{
const struct dibx000_bandwidth_config *bw = state->cfg.bw;
+ u16 clk_cfg1;
// clk_cfg0
dib7000m_write_word(state, 907, (bw->pll_prediv << 8) | (bw->pll_ratio << 0));
// clk_cfg1
//dib7000m_write_word(state, 908, (1 << 14) | (3 << 12) |(0 << 11) |
- dib7000m_write_word(state, 908, (0 << 14) | (3 << 12) |(0 << 11) |
+ clk_cfg1 = (0 << 14) | (3 << 12) |(0 << 11) |
(bw->IO_CLK_en_core << 10) | (bw->bypclk_div << 5) | (bw->enable_refdiv << 4) |
- (bw->pll_bypass << 3) | (bw->pll_range << 1) | (bw->pll_reset << 0));
+ (1 << 3) | (bw->pll_range << 1) | (bw->pll_reset << 0);
+ dib7000m_write_word(state, 908, clk_cfg1);
+ clk_cfg1 = (clk_cfg1 & 0xfff7) | (bw->pll_bypass << 3);
+ dib7000m_write_word(state, 908, clk_cfg1);
// smpl_cfg
dib7000m_write_word(state, 910, (1 << 12) | (2 << 10) | (bw->modulo << 8) | (bw->ADClkSrc << 7));
@@ -344,9 +403,6 @@ static void dib7000mc_reset_pll(struct dib7000m_state *state)
static int dib7000m_reset_gpio(struct dib7000m_state *st)
{
/* reset the GPIOs */
- dprintk("-D- gpio dir: %x: gpio val: %x, gpio pwm pos: %x\n",
- st->cfg.gpio_dir, st->cfg.gpio_val,st->cfg.gpio_pwm_pos);
-
dib7000m_write_word(st, 773, st->cfg.gpio_dir);
dib7000m_write_word(st, 774, st->cfg.gpio_val);
@@ -358,6 +414,107 @@ static int dib7000m_reset_gpio(struct dib7000m_state *st)
return 0;
}
+static u16 dib7000m_defaults_common[] =
+
+{
+ // auto search configuration
+ 3, 2,
+ 0x0004,
+ 0x1000,
+ 0x0814,
+
+ 12, 6,
+ 0x001b,
+ 0x7740,
+ 0x005b,
+ 0x8d80,
+ 0x01c9,
+ 0xc380,
+ 0x0000,
+ 0x0080,
+ 0x0000,
+ 0x0090,
+ 0x0001,
+ 0xd4c0,
+
+ 1, 26,
+ 0x6680, // P_corm_thres Lock algorithms configuration
+
+ 1, 170,
+ 0x0410, // P_palf_alpha_regul, P_palf_filter_freeze, P_palf_filter_on
+
+ 8, 173,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+
+ 1, 182,
+ 8192, // P_fft_nb_to_cut
+
+ 2, 195,
+ 0x0ccd, // P_pha3_thres
+ 0, // P_cti_use_cpe, P_cti_use_prog
+
+ 1, 205,
+ 0x200f, // P_cspu_regul, P_cspu_win_cut
+
+ 5, 214,
+ 0x023d, // P_adp_regul_cnt
+ 0x00a4, // P_adp_noise_cnt
+ 0x00a4, // P_adp_regul_ext
+ 0x7ff0, // P_adp_noise_ext
+ 0x3ccc, // P_adp_fil
+
+ 1, 226,
+ 0, // P_2d_byp_ti_num
+
+ 1, 255,
+ 0x800, // P_equal_thres_wgn
+
+ 1, 263,
+ 0x0001,
+
+ 1, 281,
+ 0x0010, // P_fec_*
+
+ 1, 294,
+ 0x0062, // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
+
+ 0
+};
+
+static u16 dib7000m_defaults[] =
+
+{
+ /* set ADC level to -16 */
+ 11, 76,
+ (1 << 13) - 825 - 117,
+ (1 << 13) - 837 - 117,
+ (1 << 13) - 811 - 117,
+ (1 << 13) - 766 - 117,
+ (1 << 13) - 737 - 117,
+ (1 << 13) - 693 - 117,
+ (1 << 13) - 648 - 117,
+ (1 << 13) - 619 - 117,
+ (1 << 13) - 575 - 117,
+ (1 << 13) - 531 - 117,
+ (1 << 13) - 501 - 117,
+
+ // Tuner IO bank: max drive (14mA)
+ 1, 912,
+ 0x2c8a,
+
+ 1, 1817,
+ 1,
+
+ 0,
+};
+
static int dib7000m_demod_reset(struct dib7000m_state *state)
{
dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
@@ -382,22 +539,47 @@ static int dib7000m_demod_reset(struct dib7000m_state *state)
dib7000mc_reset_pll(state);
if (dib7000m_reset_gpio(state) != 0)
- dprintk("-E- GPIO reset was not successful.\n");
+ dprintk( "GPIO reset was not successful.");
if (dib7000m_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
- dprintk("-E- OUTPUT_MODE could not be resetted.\n");
+ dprintk( "OUTPUT_MODE could not be reset.");
/* unforce divstr regardless whether i2c enumeration was done or not */
dib7000m_write_word(state, 1794, dib7000m_read_word(state, 1794) & ~(1 << 1) );
- dib7000m_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ);
+ dib7000m_set_bandwidth(state, 8000);
dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON);
dib7000m_sad_calib(state);
dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
+ if (state->cfg.dvbt_mode)
+ dib7000m_write_word(state, 1796, 0x0); // select DVB-T output
+
+ if (state->cfg.mobile_mode)
+ dib7000m_write_word(state, 261 + state->reg_offs, 2);
+ else
+ dib7000m_write_word(state, 224 + state->reg_offs, 1);
+
+ // P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
+ if(state->cfg.tuner_is_baseband)
+ dib7000m_write_word(state, 36, 0x0755);
+ else
+ dib7000m_write_word(state, 36, 0x1f55);
+
+ // P_divclksel=3 P_divbitsel=1
+ if (state->revision == 0x4000)
+ dib7000m_write_word(state, 909, (3 << 10) | (1 << 6));
+ else
+ dib7000m_write_word(state, 909, (3 << 4) | 1);
+
+ dib7000m_write_tab(state, dib7000m_defaults_common);
+ dib7000m_write_tab(state, dib7000m_defaults);
+
dib7000m_set_power_mode(state, DIB7000M_POWER_INTERFACE_ONLY);
+ state->internal_clk = state->cfg.bw->internal;
+
return 0;
}
@@ -427,7 +609,7 @@ static int dib7000m_agc_soft_split(struct dib7000m_state *state)
(agc - state->current_agc->split.min_thres) /
(state->current_agc->split.max_thres - state->current_agc->split.min_thres);
- dprintk("AGC split_offset: %d\n",split_offset);
+ dprintk( "AGC split_offset: %d",split_offset);
// P_agc_force_split and P_agc_split_offset
return dib7000m_write_word(state, 103, (dib7000m_read_word(state, 103) & 0xff00) | split_offset);
@@ -435,35 +617,26 @@ static int dib7000m_agc_soft_split(struct dib7000m_state *state)
static int dib7000m_update_lna(struct dib7000m_state *state)
{
- int i;
u16 dyn_gain;
- // when there is no LNA to program return immediatly
- if (state->cfg.update_lna == NULL)
- return 0;
-
- msleep(60);
- for (i = 0; i < 20; i++) {
- // read dyn_gain here (because it is demod-dependent and not tuner)
+ if (state->cfg.update_lna) {
+ // read dyn_gain here (because it is demod-dependent and not fe)
dyn_gain = dib7000m_read_word(state, 390);
- dprintk("agc global: %d\n", dyn_gain);
-
if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
dib7000m_restart_agc(state);
- msleep(60);
- } else
- break;
+ return 1;
+ }
}
return 0;
}
-static void dib7000m_set_agc_config(struct dib7000m_state *state, u8 band)
+static int dib7000m_set_agc_config(struct dib7000m_state *state, u8 band)
{
struct dibx000_agc_config *agc = NULL;
int i;
- if (state->current_band == band)
- return;
+ if (state->current_band == band && state->current_agc != NULL)
+ return 0;
state->current_band = band;
for (i = 0; i < state->cfg.agc_config_count; i++)
@@ -473,8 +646,8 @@ static void dib7000m_set_agc_config(struct dib7000m_state *state, u8 band)
}
if (agc == NULL) {
- dprintk("-E- No valid AGC configuration found for band 0x%02x\n",band);
- return;
+ dprintk( "no valid AGC configuration found for band 0x%02x",band);
+ return -EINVAL;
}
state->current_agc = agc;
@@ -489,7 +662,7 @@ static void dib7000m_set_agc_config(struct dib7000m_state *state, u8 band)
dib7000m_write_word(state, 98, (agc->alpha_mant << 5) | agc->alpha_exp);
dib7000m_write_word(state, 99, (agc->beta_mant << 6) | agc->beta_exp);
- dprintk("-D- WBD: ref: %d, sel: %d, active: %d, alpha: %d\n",
+ dprintk( "WBD: ref: %d, sel: %d, active: %d, alpha: %d",
state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
/* AGC continued */
@@ -510,7 +683,7 @@ static void dib7000m_set_agc_config(struct dib7000m_state *state, u8 band)
if (state->revision > 0x4000) { // settings for the MC
dib7000m_write_word(state, 71, agc->agc1_pt3);
-// dprintk("-D- 929: %x %d %d\n",
+// dprintk( "929: %x %d %d",
// (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2), agc->wbd_inv, agc->wbd_sel);
dib7000m_write_word(state, 929, (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2));
} else {
@@ -519,33 +692,160 @@ static void dib7000m_set_agc_config(struct dib7000m_state *state, u8 band)
for (i = 0; i < 9; i++)
dib7000m_write_word(state, 88 + i, b[i]);
}
+ return 0;
}
-static void dib7000m_update_timf_freq(struct dib7000m_state *state)
+static void dib7000m_update_timf(struct dib7000m_state *state)
{
u32 timf = (dib7000m_read_word(state, 436) << 16) | dib7000m_read_word(state, 437);
- state->timf = timf * 80 / (BW_INDEX_TO_KHZ(state->current_bandwidth) / 100);
+ state->timf = timf * 160 / (state->current_bandwidth / 50);
dib7000m_write_word(state, 23, (u16) (timf >> 16));
dib7000m_write_word(state, 24, (u16) (timf & 0xffff));
- dprintk("-D- Updated timf_frequency: %d (default: %d)\n",state->timf, state->cfg.bw->timf);
+ dprintk( "updated timf_frequency: %d (default: %d)",state->timf, state->timf_default);
+}
+
+static int dib7000m_agc_startup(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
+{
+ struct dib7000m_state *state = demod->demodulator_priv;
+ u16 cfg_72 = dib7000m_read_word(state, 72);
+ int ret = -1;
+ u8 *agc_state = &state->agc_state;
+ u8 agc_split;
+
+ switch (state->agc_state) {
+ case 0:
+ // set power-up level: interf+analog+AGC
+ dib7000m_set_power_mode(state, DIB7000M_POWER_INTERF_ANALOG_AGC);
+ dib7000m_set_adc_state(state, DIBX000_ADC_ON);
+
+ if (dib7000m_set_agc_config(state, BAND_OF_FREQUENCY(ch->frequency/1000)) != 0)
+ return -1;
+
+ ret = 7; /* ADC power up */
+ (*agc_state)++;
+ break;
+
+ case 1:
+ /* AGC initialization */
+ if (state->cfg.agc_control)
+ state->cfg.agc_control(&state->demod, 1);
+
+ dib7000m_write_word(state, 75, 32768);
+ if (!state->current_agc->perform_agc_softsplit) {
+ /* we are using the wbd - so slow AGC startup */
+ dib7000m_write_word(state, 103, 1 << 8); /* force 0 split on WBD and restart AGC */
+ (*agc_state)++;
+ ret = 5;
+ } else {
+ /* default AGC startup */
+ (*agc_state) = 4;
+ /* wait AGC rough lock time */
+ ret = 7;
+ }
+
+ dib7000m_restart_agc(state);
+ break;
+
+ case 2: /* fast split search path after 5sec */
+ dib7000m_write_word(state, 72, cfg_72 | (1 << 4)); /* freeze AGC loop */
+ dib7000m_write_word(state, 103, 2 << 9); /* fast split search 0.25kHz */
+ (*agc_state)++;
+ ret = 14;
+ break;
+
+ case 3: /* split search ended */
+ agc_split = (u8)dib7000m_read_word(state, 392); /* store the split value for the next time */
+ dib7000m_write_word(state, 75, dib7000m_read_word(state, 390)); /* set AGC gain start value */
+
+ dib7000m_write_word(state, 72, cfg_72 & ~(1 << 4)); /* std AGC loop */
+ dib7000m_write_word(state, 103, (state->current_agc->wbd_alpha << 9) | agc_split); /* standard split search */
+
+ dib7000m_restart_agc(state);
+
+ dprintk( "SPLIT %p: %hd", demod, agc_split);
+
+ (*agc_state)++;
+ ret = 5;
+ break;
+
+ case 4: /* LNA startup */
+ /* wait AGC accurate lock time */
+ ret = 7;
+
+ if (dib7000m_update_lna(state))
+ // wait only AGC rough lock time
+ ret = 5;
+ else
+ (*agc_state)++;
+ break;
+
+ case 5:
+ dib7000m_agc_soft_split(state);
+
+ if (state->cfg.agc_control)
+ state->cfg.agc_control(&state->demod, 0);
+
+ (*agc_state)++;
+ break;
+
+ default:
+ break;
+ }
+ return ret;
}
-static void dib7000m_set_channel(struct dib7000m_state *state, struct dibx000_ofdm_channel *ch, u8 seq)
+static void dib7000m_set_channel(struct dib7000m_state *state, struct dvb_frontend_parameters *ch, u8 seq)
{
u16 value, est[4];
- dib7000m_set_agc_config(state, BAND_OF_FREQUENCY(ch->RF_kHz));
+ dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth));
/* nfft, guard, qam, alpha */
- dib7000m_write_word(state, 0, (ch->nfft << 7) | (ch->guard << 5) | (ch->nqam << 3) | (ch->vit_alpha));
+ value = 0;
+ switch (ch->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_2K: value |= (0 << 7); break;
+ case /* 4K MODE */ 255: value |= (2 << 7); break;
+ default:
+ case TRANSMISSION_MODE_8K: value |= (1 << 7); break;
+ }
+ switch (ch->u.ofdm.guard_interval) {
+ case GUARD_INTERVAL_1_32: value |= (0 << 5); break;
+ case GUARD_INTERVAL_1_16: value |= (1 << 5); break;
+ case GUARD_INTERVAL_1_4: value |= (3 << 5); break;
+ default:
+ case GUARD_INTERVAL_1_8: value |= (2 << 5); break;
+ }
+ switch (ch->u.ofdm.constellation) {
+ case QPSK: value |= (0 << 3); break;
+ case QAM_16: value |= (1 << 3); break;
+ default:
+ case QAM_64: value |= (2 << 3); break;
+ }
+ switch (HIERARCHY_1) {
+ case HIERARCHY_2: value |= 2; break;
+ case HIERARCHY_4: value |= 4; break;
+ default:
+ case HIERARCHY_1: value |= 1; break;
+ }
+ dib7000m_write_word(state, 0, value);
dib7000m_write_word(state, 5, (seq << 4));
- /* P_dintl_native, P_dintlv_inv, P_vit_hrch, P_vit_code_rate, P_vit_select_hp */
- value = (ch->intlv_native << 6) | (ch->vit_hrch << 4) | (ch->vit_select_hp & 0x1);
- if (ch->vit_hrch == 0 || ch->vit_select_hp == 1)
- value |= (ch->vit_code_rate_hp << 1);
- else
- value |= (ch->vit_code_rate_lp << 1);
+ /* P_dintl_native, P_dintlv_inv, P_hrch, P_code_rate, P_select_hp */
+ value = 0;
+ if (1 != 0)
+ value |= (1 << 6);
+ if (ch->u.ofdm.hierarchy_information == 1)
+ value |= (1 << 4);
+ if (1 == 1)
+ value |= 1;
+ switch ((ch->u.ofdm.hierarchy_information == 0 || 1 == 1) ? ch->u.ofdm.code_rate_HP : ch->u.ofdm.code_rate_LP) {
+ case FEC_2_3: value |= (2 << 1); break;
+ case FEC_3_4: value |= (3 << 1); break;
+ case FEC_5_6: value |= (5 << 1); break;
+ case FEC_7_8: value |= (7 << 1); break;
+ default:
+ case FEC_1_2: value |= (1 << 1); break;
+ }
dib7000m_write_word(state, 267 + state->reg_offs, value);
/* offset loop parameters */
@@ -563,32 +863,38 @@ static void dib7000m_set_channel(struct dib7000m_state *state, struct dibx000_of
dib7000m_write_word(state, 33, (0 << 4) | 0x5);
/* P_dvsy_sync_wait */
- switch (ch->nfft) {
- case 1: value = 256; break;
- case 2: value = 128; break;
- case 0:
+ switch (ch->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_8K: value = 256; break;
+ case /* 4K MODE */ 255: value = 128; break;
+ case TRANSMISSION_MODE_2K:
default: value = 64; break;
}
- value *= ((1 << (ch->guard)) * 3 / 2); // add 50% SFN margin
- value <<= 4;
+ switch (ch->u.ofdm.guard_interval) {
+ case GUARD_INTERVAL_1_16: value *= 2; break;
+ case GUARD_INTERVAL_1_8: value *= 4; break;
+ case GUARD_INTERVAL_1_4: value *= 8; break;
+ default:
+ case GUARD_INTERVAL_1_32: value *= 1; break;
+ }
+ state->div_sync_wait = (value * 3) / 2 + 32; // add 50% SFN margin + compensate for one DVSY-fifo TODO
/* deactive the possibility of diversity reception if extended interleave - not for 7000MC */
/* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
- if (ch->intlv_native || state->revision > 0x4000)
- value |= (1 << 2) | (2 << 0);
+ if (1 == 1 || state->revision > 0x4000)
+ state->div_force_off = 0;
else
- value |= 0;
- dib7000m_write_word(state, 266 + state->reg_offs, value);
+ state->div_force_off = 1;
+ dib7000m_set_diversity_in(&state->demod, state->div_state);
/* channel estimation fine configuration */
- switch (ch->nqam) {
- case 2:
+ switch (ch->u.ofdm.constellation) {
+ case QAM_64:
est[0] = 0x0148; /* P_adp_regul_cnt 0.04 */
est[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */
est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
est[3] = 0xfff8; /* P_adp_noise_ext -0.001 */
break;
- case 1:
+ case QAM_16:
est[0] = 0x023d; /* P_adp_regul_cnt 0.07 */
est[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */
est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
@@ -604,70 +910,48 @@ static void dib7000m_set_channel(struct dib7000m_state *state, struct dibx000_of
for (value = 0; value < 4; value++)
dib7000m_write_word(state, 214 + value + state->reg_offs, est[value]);
- // set power-up level: interf+analog+AGC
- dib7000m_set_power_mode(state, DIB7000M_POWER_INTERF_ANALOG_AGC);
- dib7000m_set_adc_state(state, DIBX000_ADC_ON);
-
- msleep(7);
-
- //AGC initialization
- if (state->cfg.agc_control)
- state->cfg.agc_control(&state->demod, 1);
-
- dib7000m_restart_agc(state);
-
- // wait AGC rough lock time
- msleep(5);
-
- dib7000m_update_lna(state);
- dib7000m_agc_soft_split(state);
-
- // wait AGC accurate lock time
- msleep(7);
-
- if (state->cfg.agc_control)
- state->cfg.agc_control(&state->demod, 0);
-
// set power-up level: autosearch
dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD);
}
-static int dib7000m_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+static int dib7000m_autosearch_start(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
{
struct dib7000m_state *state = demod->demodulator_priv;
- struct dibx000_ofdm_channel auto_ch;
+ struct dvb_frontend_parameters schan;
int ret = 0;
- u32 value;
-
- INIT_OFDM_CHANNEL(&auto_ch);
- auto_ch.RF_kHz = ch->RF_kHz;
- auto_ch.Bw = ch->Bw;
- auto_ch.nqam = 2;
- auto_ch.guard = 0;
- auto_ch.nfft = 1;
- auto_ch.vit_alpha = 1;
- auto_ch.vit_select_hp = 1;
- auto_ch.vit_code_rate_hp = 2;
- auto_ch.vit_code_rate_lp = 3;
- auto_ch.vit_hrch = 0;
- auto_ch.intlv_native = 1;
-
- dib7000m_set_channel(state, &auto_ch, 7);
+ u32 value, factor;
+
+ schan = *ch;
+
+ schan.u.ofdm.constellation = QAM_64;
+ schan.u.ofdm.guard_interval = GUARD_INTERVAL_1_32;
+ schan.u.ofdm.transmission_mode = TRANSMISSION_MODE_8K;
+ schan.u.ofdm.code_rate_HP = FEC_2_3;
+ schan.u.ofdm.code_rate_LP = FEC_3_4;
+ schan.u.ofdm.hierarchy_information = 0;
+
+ dib7000m_set_channel(state, &schan, 7);
+
+ factor = BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth);
+ if (factor >= 5000)
+ factor = 1;
+ else
+ factor = 6;
// always use the setting for 8MHz here lock_time for 7,6 MHz are longer
- value = 30 * state->cfg.bw->internal;
+ value = 30 * state->internal_clk * factor;
ret |= dib7000m_write_word(state, 6, (u16) ((value >> 16) & 0xffff)); // lock0 wait time
ret |= dib7000m_write_word(state, 7, (u16) (value & 0xffff)); // lock0 wait time
- value = 100 * state->cfg.bw->internal;
+ value = 100 * state->internal_clk * factor;
ret |= dib7000m_write_word(state, 8, (u16) ((value >> 16) & 0xffff)); // lock1 wait time
ret |= dib7000m_write_word(state, 9, (u16) (value & 0xffff)); // lock1 wait time
- value = 500 * state->cfg.bw->internal;
+ value = 500 * state->internal_clk * factor;
ret |= dib7000m_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
ret |= dib7000m_write_word(state, 11, (u16) (value & 0xffff)); // lock2 wait time
// start search
value = dib7000m_read_word(state, 0);
- ret |= dib7000m_write_word(state, 0, value | (1 << 9));
+ ret |= dib7000m_write_word(state, 0, (u16) (value | (1 << 9)));
/* clear n_irq_pending */
if (state->revision == 0x4000)
@@ -685,12 +969,12 @@ static int dib7000m_autosearch_irq(struct dib7000m_state *state, u16 reg)
u16 irq_pending = dib7000m_read_word(state, reg);
if (irq_pending & 0x1) { // failed
- dprintk("#\n");
+ dprintk( "autosearch failed");
return 1;
}
if (irq_pending & 0x2) { // succeeded
- dprintk("!\n");
+ dprintk( "autosearch succeeded");
return 2;
}
return 0; // still pending
@@ -705,7 +989,7 @@ static int dib7000m_autosearch_is_irq(struct dvb_frontend *demod)
return dib7000m_autosearch_irq(state, 537);
}
-static int dib7000m_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+static int dib7000m_tune(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
{
struct dib7000m_state *state = demod->demodulator_priv;
int ret = 0;
@@ -722,182 +1006,103 @@ static int dib7000m_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel
ret |= dib7000m_write_word(state, 898, 0x0000);
msleep(45);
- ret |= dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD);
+ dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD);
/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
ret |= dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
- // never achieved a lock with that bandwidth so far - wait for timfreq to update
+ // never achieved a lock before - wait for timfreq to update
if (state->timf == 0)
msleep(200);
//dump_reg(state);
/* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
value = (6 << 8) | 0x80;
- switch (ch->nfft) {
- case 0: value |= (7 << 12); break;
- case 1: value |= (9 << 12); break;
- case 2: value |= (8 << 12); break;
+ switch (ch->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_2K: value |= (7 << 12); break;
+ case /* 4K MODE */ 255: value |= (8 << 12); break;
+ default:
+ case TRANSMISSION_MODE_8K: value |= (9 << 12); break;
}
ret |= dib7000m_write_word(state, 26, value);
/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
value = (0 << 4);
- switch (ch->nfft) {
- case 0: value |= 0x6; break;
- case 1: value |= 0x8; break;
- case 2: value |= 0x7; break;
+ switch (ch->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_2K: value |= 0x6; break;
+ case /* 4K MODE */ 255: value |= 0x7; break;
+ default:
+ case TRANSMISSION_MODE_8K: value |= 0x8; break;
}
ret |= dib7000m_write_word(state, 32, value);
/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
value = (0 << 4);
- switch (ch->nfft) {
- case 0: value |= 0x6; break;
- case 1: value |= 0x8; break;
- case 2: value |= 0x7; break;
+ switch (ch->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_2K: value |= 0x6; break;
+ case /* 4K MODE */ 255: value |= 0x7; break;
+ default:
+ case TRANSMISSION_MODE_8K: value |= 0x8; break;
}
ret |= dib7000m_write_word(state, 33, value);
- // we achieved a lock - it's time to update the osc freq
+ // we achieved a lock - it's time to update the timf freq
if ((dib7000m_read_word(state, 535) >> 6) & 0x1)
- dib7000m_update_timf_freq(state);
+ dib7000m_update_timf(state);
+ dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth));
return ret;
}
-static int dib7000m_init(struct dvb_frontend *demod)
+static int dib7000m_wakeup(struct dvb_frontend *demod)
{
struct dib7000m_state *state = demod->demodulator_priv;
- int ret = 0;
- u8 o = state->reg_offs;
dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
if (dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
- dprintk("-E- could not start Slow ADC\n");
-
- if (state->cfg.dvbt_mode)
- dib7000m_write_word(state, 1796, 0x0); // select DVB-T output
-
- if (state->cfg.mobile_mode)
- ret |= dib7000m_write_word(state, 261 + o, 2);
- else
- ret |= dib7000m_write_word(state, 224 + o, 1);
-
- ret |= dib7000m_write_word(state, 173 + o, 0);
- ret |= dib7000m_write_word(state, 174 + o, 0);
- ret |= dib7000m_write_word(state, 175 + o, 0);
- ret |= dib7000m_write_word(state, 176 + o, 0);
- ret |= dib7000m_write_word(state, 177 + o, 0);
- ret |= dib7000m_write_word(state, 178 + o, 0);
- ret |= dib7000m_write_word(state, 179 + o, 0);
- ret |= dib7000m_write_word(state, 180 + o, 0);
-
- // P_corm_thres Lock algorithms configuration
- ret |= dib7000m_write_word(state, 26, 0x6680);
-
- // P_palf_alpha_regul, P_palf_filter_freeze, P_palf_filter_on
- ret |= dib7000m_write_word(state, 170 + o, 0x0410);
- // P_fft_nb_to_cut
- ret |= dib7000m_write_word(state, 182 + o, 8192);
- // P_pha3_thres
- ret |= dib7000m_write_word(state, 195 + o, 0x0ccd);
- // P_cti_use_cpe, P_cti_use_prog
- ret |= dib7000m_write_word(state, 196 + o, 0);
- // P_cspu_regul, P_cspu_win_cut
- ret |= dib7000m_write_word(state, 205 + o, 0x200f);
- // P_adp_regul_cnt
- ret |= dib7000m_write_word(state, 214 + o, 0x023d);
- // P_adp_noise_cnt
- ret |= dib7000m_write_word(state, 215 + o, 0x00a4);
- // P_adp_regul_ext
- ret |= dib7000m_write_word(state, 216 + o, 0x00a4);
- // P_adp_noise_ext
- ret |= dib7000m_write_word(state, 217 + o, 0x7ff0);
- // P_adp_fil
- ret |= dib7000m_write_word(state, 218 + o, 0x3ccc);
-
- // P_2d_byp_ti_num
- ret |= dib7000m_write_word(state, 226 + o, 0);
-
- // P_fec_*
- ret |= dib7000m_write_word(state, 281 + o, 0x0010);
- // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
- ret |= dib7000m_write_word(state, 294 + o,0x0062);
-
- // P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
- if(state->cfg.tuner_is_baseband)
- ret |= dib7000m_write_word(state, 36, 0x0755);
- else
- ret |= dib7000m_write_word(state, 36, 0x1f55);
-
- // auto search configuration
- ret |= dib7000m_write_word(state, 2, 0x0004);
- ret |= dib7000m_write_word(state, 3, 0x1000);
- ret |= dib7000m_write_word(state, 4, 0x0814);
- ret |= dib7000m_write_word(state, 6, 0x001b);
- ret |= dib7000m_write_word(state, 7, 0x7740);
- ret |= dib7000m_write_word(state, 8, 0x005b);
- ret |= dib7000m_write_word(state, 9, 0x8d80);
- ret |= dib7000m_write_word(state, 10, 0x01c9);
- ret |= dib7000m_write_word(state, 11, 0xc380);
- ret |= dib7000m_write_word(state, 12, 0x0000);
- ret |= dib7000m_write_word(state, 13, 0x0080);
- ret |= dib7000m_write_word(state, 14, 0x0000);
- ret |= dib7000m_write_word(state, 15, 0x0090);
- ret |= dib7000m_write_word(state, 16, 0x0001);
- ret |= dib7000m_write_word(state, 17, 0xd4c0);
- ret |= dib7000m_write_word(state, 263 + o,0x0001);
-
- // P_divclksel=3 P_divbitsel=1
- if (state->revision == 0x4000)
- dib7000m_write_word(state, 909, (3 << 10) | (1 << 6));
- else
- dib7000m_write_word(state, 909, (3 << 4) | 1);
-
- // Tuner IO bank: max drive (14mA)
- ret |= dib7000m_write_word(state, 912 ,0x2c8a);
+ dprintk( "could not start Slow ADC");
- ret |= dib7000m_write_word(state, 1817, 1);
-
- return ret;
+ return 0;
}
static int dib7000m_sleep(struct dvb_frontend *demod)
{
struct dib7000m_state *st = demod->demodulator_priv;
dib7000m_set_output_mode(st, OUTMODE_HIGH_Z);
- return dib7000m_set_power_mode(st, DIB7000M_POWER_INTERFACE_ONLY) |
- dib7000m_set_adc_state(st, DIBX000_SLOW_ADC_OFF) |
+ dib7000m_set_power_mode(st, DIB7000M_POWER_INTERFACE_ONLY);
+ return dib7000m_set_adc_state(st, DIBX000_SLOW_ADC_OFF) |
dib7000m_set_adc_state(st, DIBX000_ADC_OFF);
}
static int dib7000m_identify(struct dib7000m_state *state)
{
u16 value;
+
if ((value = dib7000m_read_word(state, 896)) != 0x01b3) {
- dprintk("-E- DiB7000M: wrong Vendor ID (read=0x%x)\n",value);
+ dprintk( "wrong Vendor ID (0x%x)",value);
return -EREMOTEIO;
}
state->revision = dib7000m_read_word(state, 897);
if (state->revision != 0x4000 &&
state->revision != 0x4001 &&
- state->revision != 0x4002) {
- dprintk("-E- DiB7000M: wrong Device ID (%x)\n",value);
+ state->revision != 0x4002 &&
+ state->revision != 0x4003) {
+ dprintk( "wrong Device ID (0x%x)",value);
return -EREMOTEIO;
}
/* protect this driver to be used with 7000PC */
if (state->revision == 0x4000 && dib7000m_read_word(state, 769) == 0x4000) {
- dprintk("-E- DiB7000M: this driver does not work with DiB7000PC\n");
+ dprintk( "this driver does not work with DiB7000PC");
return -EREMOTEIO;
}
switch (state->revision) {
- case 0x4000: dprintk("-I- found DiB7000MA/PA/MB/PB\n"); break;
- case 0x4001: state->reg_offs = 1; dprintk("-I- found DiB7000HC\n"); break;
- case 0x4002: state->reg_offs = 1; dprintk("-I- found DiB7000MC\n"); break;
+ case 0x4000: dprintk( "found DiB7000MA/PA/MB/PB"); break;
+ case 0x4001: state->reg_offs = 1; dprintk( "found DiB7000HC"); break;
+ case 0x4002: state->reg_offs = 1; dprintk( "found DiB7000MC"); break;
+ case 0x4003: state->reg_offs = 1; dprintk( "found DiB9000"); break;
}
return 0;
@@ -966,41 +1171,45 @@ static int dib7000m_set_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
struct dib7000m_state *state = fe->demodulator_priv;
- struct dibx000_ofdm_channel ch;
-
- INIT_OFDM_CHANNEL(&ch);
- FEP2DIB(fep,&ch);
+ int time;
state->current_bandwidth = fep->u.ofdm.bandwidth;
- dib7000m_set_bandwidth(fe, fep->u.ofdm.bandwidth);
+ dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->u.ofdm.bandwidth));
if (fe->ops.tuner_ops.set_params)
fe->ops.tuner_ops.set_params(fe, fep);
+ /* start up the AGC */
+ state->agc_state = 0;
+ do {
+ time = dib7000m_agc_startup(fe, fep);
+ if (time != -1)
+ msleep(time);
+ } while (time != -1);
+
if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ||
fep->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO ||
fep->u.ofdm.constellation == QAM_AUTO ||
fep->u.ofdm.code_rate_HP == FEC_AUTO) {
int i = 800, found;
- dib7000m_autosearch_start(fe, &ch);
+ dib7000m_autosearch_start(fe, fep);
do {
msleep(1);
found = dib7000m_autosearch_is_irq(fe);
} while (found == 0 && i--);
- dprintk("autosearch returns: %d\n",found);
+ dprintk("autosearch returns: %d",found);
if (found == 0 || found == 1)
return 0; // no channel found
dib7000m_get_frontend(fe, fep);
- FEP2DIB(fep, &ch);
}
/* make this a config parameter */
dib7000m_set_output_mode(state, OUTMODE_MPEG2_FIFO);
- return dib7000m_tune(fe, &ch);
+ return dib7000m_tune(fe, fep);
}
static int dib7000m_read_status(struct dvb_frontend *fe, fe_status_t *stat)
@@ -1087,7 +1296,7 @@ int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 defau
if (dib7000m_identify(&st) != 0) {
st.i2c_addr = default_addr;
if (dib7000m_identify(&st) != 0) {
- dprintk("DiB7000M #%d: not identified\n", k);
+ dprintk("DiB7000M #%d: not identified", k);
return -EIO;
}
}
@@ -1100,7 +1309,7 @@ int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 defau
/* set new i2c address and force divstart */
dib7000m_write_word(&st, 1794, (new_addr << 2) | 0x2);
- dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr);
+ dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
}
for (k = 0; k < no_of_demods; k++) {
@@ -1135,6 +1344,8 @@ struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr,
demod->demodulator_priv = st;
memcpy(&st->demod.ops, &dib7000m_ops, sizeof(struct dvb_frontend_ops));
+ st->timf_default = cfg->bw->timf;
+
if (dib7000m_identify(st) != 0)
goto error;
@@ -1172,7 +1383,7 @@ static struct dvb_frontend_ops dib7000m_ops = {
.release = dib7000m_release,
- .init = dib7000m_init,
+ .init = dib7000m_wakeup,
.sleep = dib7000m_sleep,
.set_frontend = dib7000m_set_frontend,
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index aece458cfe1..f45bcfc51cf 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -1,7 +1,7 @@
/*
* Linux-DVB Driver for DiBcom's second generation DiB7000P (PC).
*
- * Copyright (C) 2005-6 DiBcom (http://www.dibcom.fr/)
+ * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -18,7 +18,11 @@ static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000P:"); printk(args); } } while (0)
+static int buggy_sfn_workaround;
+module_param(buggy_sfn_workaround, int, 0644);
+MODULE_PARM_DESC(buggy_sfn_workaround, "Enable work-around for buggy SFNs (default: 0)");
+
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000P: "); printk(args); printk("\n"); } } while (0)
struct dib7000p_state {
struct dvb_frontend demod;
@@ -36,12 +40,21 @@ struct dib7000p_state {
struct dibx000_agc_config *current_agc;
u32 timf;
+ u8 div_force_off : 1;
+ u8 div_state : 1;
+ u16 div_sync_wait;
+
+ u8 agc_state;
+
u16 gpio_dir;
u16 gpio_val;
+
+ u8 sfn_workaround_active :1;
};
enum dib7000p_power_mode {
DIB7000P_POWER_ALL = 0,
+ DIB7000P_POWER_ANALOG_ADC,
DIB7000P_POWER_INTERFACE_ONLY,
};
@@ -55,7 +68,7 @@ static u16 dib7000p_read_word(struct dib7000p_state *state, u16 reg)
};
if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
- dprintk("i2c read error on %d\n",reg);
+ dprintk("i2c read error on %d",reg);
return (rb[0] << 8) | rb[1];
}
@@ -71,6 +84,22 @@ static int dib7000p_write_word(struct dib7000p_state *state, u16 reg, u16 val)
};
return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
}
+static void dib7000p_write_tab(struct dib7000p_state *state, u16 *buf)
+{
+ u16 l = 0, r, *n;
+ n = buf;
+ l = *n++;
+ while (l) {
+ r = *n++;
+
+ do {
+ dib7000p_write_word(state, r, *n++);
+ r++;
+ } while (--l);
+ l = *n++;
+ }
+}
+
static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode)
{
int ret = 0;
@@ -80,7 +109,7 @@ static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode)
fifo_threshold = 1792;
smo_mode = (dib7000p_read_word(state, 235) & 0x0010) | (1 << 1);
- dprintk("-I- Setting output mode for demod %p to %d\n",
+ dprintk( "setting output mode for demod %p to %d",
&state->demod, mode);
switch (mode) {
@@ -104,11 +133,14 @@ static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode)
fifo_threshold = 512;
outreg = (1 << 10) | (5 << 6);
break;
+ case OUTMODE_ANALOG_ADC:
+ outreg = (1 << 10) | (3 << 6);
+ break;
case OUTMODE_HIGH_Z: // disable
outreg = 0;
break;
default:
- dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod);
+ dprintk( "Unhandled output_mode passed to be set for demod %p",&state->demod);
break;
}
@@ -122,6 +154,30 @@ static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode)
return ret;
}
+static int dib7000p_set_diversity_in(struct dvb_frontend *demod, int onoff)
+{
+ struct dib7000p_state *state = demod->demodulator_priv;
+
+ if (state->div_force_off) {
+ dprintk( "diversity combination deactivated - forced by COFDM parameters");
+ onoff = 0;
+ }
+ state->div_state = (u8)onoff;
+
+ if (onoff) {
+ dib7000p_write_word(state, 204, 6);
+ dib7000p_write_word(state, 205, 16);
+ /* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
+ dib7000p_write_word(state, 207, (state->div_sync_wait << 4) | (1 << 2) | (2 << 0));
+ } else {
+ dib7000p_write_word(state, 204, 1);
+ dib7000p_write_word(state, 205, 0);
+ dib7000p_write_word(state, 207, 0);
+ }
+
+ return 0;
+}
+
static int dib7000p_set_power_mode(struct dib7000p_state *state, enum dib7000p_power_mode mode)
{
/* by default everything is powered off */
@@ -134,10 +190,21 @@ static int dib7000p_set_power_mode(struct dib7000p_state *state, enum dib7000p_p
case DIB7000P_POWER_ALL:
reg_774 = 0x0000; reg_775 = 0x0000; reg_776 = 0x0; reg_899 = 0x0; reg_1280 &= 0x01ff;
break;
+
+ case DIB7000P_POWER_ANALOG_ADC:
+ /* dem, cfg, iqc, sad, agc */
+ reg_774 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10) | (1 << 9));
+ /* nud */
+ reg_776 &= ~((1 << 0));
+ /* Dout */
+ reg_1280 &= ~((1 << 11));
+ /* fall through wanted to enable the interfaces */
+
/* just leave power on the control-interfaces: GPIO and (I2C or SDIO) */
case DIB7000P_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C */
reg_1280 &= ~((1 << 14) | (1 << 13) | (1 << 12) | (1 << 10));
break;
+
/* TODO following stuff is just converted from the dib7000-driver - check when is used what */
}
@@ -188,34 +255,31 @@ static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_ad
break;
}
-// dprintk("908: %x, 909: %x\n", reg_908, reg_909);
+// dprintk( "908: %x, 909: %x\n", reg_908, reg_909);
dib7000p_write_word(state, 908, reg_908);
dib7000p_write_word(state, 909, reg_909);
}
-static int dib7000p_set_bandwidth(struct dvb_frontend *demod, u8 BW_Idx)
+static int dib7000p_set_bandwidth(struct dib7000p_state *state, u32 bw)
{
- struct dib7000p_state *state = demod->demodulator_priv;
u32 timf;
// store the current bandwidth for later use
- state->current_bandwidth = BW_Idx;
+ state->current_bandwidth = bw;
if (state->timf == 0) {
- dprintk("-D- Using default timf\n");
+ dprintk( "using default timf");
timf = state->cfg.bw->timf;
} else {
- dprintk("-D- Using updated timf\n");
+ dprintk( "using updated timf");
timf = state->timf;
}
- timf = timf * (BW_INDEX_TO_KHZ(BW_Idx) / 100) / 80;
-
- dprintk("timf: %d\n",timf);
+ timf = timf * (bw / 50) / 160;
- dib7000p_write_word(state, 23, (timf >> 16) & 0xffff);
- dib7000p_write_word(state, 24, (timf ) & 0xffff);
+ dib7000p_write_word(state, 23, (u16) ((timf >> 16) & 0xffff));
+ dib7000p_write_word(state, 24, (u16) ((timf ) & 0xffff));
return 0;
}
@@ -223,7 +287,7 @@ static int dib7000p_set_bandwidth(struct dvb_frontend *demod, u8 BW_Idx)
static int dib7000p_sad_calib(struct dib7000p_state *state)
{
/* internal */
-// dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is written in set_bandwidth
+// dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
dib7000p_write_word(state, 73, (0 << 1) | (0 << 0));
dib7000p_write_word(state, 74, 776); // 0.625*3.3 / 4096
@@ -236,18 +300,37 @@ static int dib7000p_sad_calib(struct dib7000p_state *state)
return 0;
}
+int dib7000p_set_wbd_ref(struct dvb_frontend *demod, u16 value)
+{
+ struct dib7000p_state *state = demod->demodulator_priv;
+ if (value > 4095)
+ value = 4095;
+ state->wbd_ref = value;
+ return dib7000p_write_word(state, 105, (dib7000p_read_word(state, 105) & 0xf000) | value);
+}
+
+EXPORT_SYMBOL(dib7000p_set_wbd_ref);
static void dib7000p_reset_pll(struct dib7000p_state *state)
{
struct dibx000_bandwidth_config *bw = &state->cfg.bw[0];
+ u16 clk_cfg0;
+
+ /* force PLL bypass */
+ clk_cfg0 = (1 << 15) | ((bw->pll_ratio & 0x3f) << 9) |
+ (bw->modulo << 7) | (bw->ADClkSrc << 6) | (bw->IO_CLK_en_core << 5) |
+ (bw->bypclk_div << 2) | (bw->enable_refdiv << 1) | (0 << 0);
+ dib7000p_write_word(state, 900, clk_cfg0);
+
+ /* P_pll_cfg */
dib7000p_write_word(state, 903, (bw->pll_prediv << 5) | (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset);
- dib7000p_write_word(state, 900, ((bw->pll_ratio & 0x3f) << 9) | (bw->pll_bypass << 15) | (bw->modulo << 7) | (bw->ADClkSrc << 6) |
- (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) | (bw->enable_refdiv << 1) | (0 << 0));
+ clk_cfg0 = (bw->pll_bypass << 15) | (clk_cfg0 & 0x7fff);
+ dib7000p_write_word(state, 900, clk_cfg0);
- dib7000p_write_word(state, 18, ((bw->internal*1000) >> 16) & 0xffff);
- dib7000p_write_word(state, 19, (bw->internal*1000 ) & 0xffff);
- dib7000p_write_word(state, 21, (bw->ifreq >> 16) & 0xffff);
- dib7000p_write_word(state, 22, (bw->ifreq ) & 0xffff);
+ dib7000p_write_word(state, 18, (u16) (((bw->internal*1000) >> 16) & 0xffff));
+ dib7000p_write_word(state, 19, (u16) ( (bw->internal*1000 ) & 0xffff));
+ dib7000p_write_word(state, 21, (u16) ( (bw->ifreq >> 16) & 0xffff));
+ dib7000p_write_word(state, 22, (u16) ( (bw->ifreq ) & 0xffff));
dib7000p_write_word(state, 72, bw->sad_cfg);
}
@@ -255,7 +338,7 @@ static void dib7000p_reset_pll(struct dib7000p_state *state)
static int dib7000p_reset_gpio(struct dib7000p_state *st)
{
/* reset the GPIOs */
- dprintk("-D- gpio dir: %x: gpio val: %x, gpio pwm pos: %x\n",st->gpio_dir, st->gpio_val,st->cfg.gpio_pwm_pos);
+ dprintk( "gpio dir: %x: val: %x, pwm_pos: %x",st->gpio_dir, st->gpio_val,st->cfg.gpio_pwm_pos);
dib7000p_write_word(st, 1029, st->gpio_dir);
dib7000p_write_word(st, 1030, st->gpio_val);
@@ -268,6 +351,120 @@ static int dib7000p_reset_gpio(struct dib7000p_state *st)
return 0;
}
+static int dib7000p_cfg_gpio(struct dib7000p_state *st, u8 num, u8 dir, u8 val)
+{
+ st->gpio_dir = dib7000p_read_word(st, 1029);
+ st->gpio_dir &= ~(1 << num); /* reset the direction bit */
+ st->gpio_dir |= (dir & 0x1) << num; /* set the new direction */
+ dib7000p_write_word(st, 1029, st->gpio_dir);
+
+ st->gpio_val = dib7000p_read_word(st, 1030);
+ st->gpio_val &= ~(1 << num); /* reset the direction bit */
+ st->gpio_val |= (val & 0x01) << num; /* set the new value */
+ dib7000p_write_word(st, 1030, st->gpio_val);
+
+ return 0;
+}
+
+int dib7000p_set_gpio(struct dvb_frontend *demod, u8 num, u8 dir, u8 val)
+{
+ struct dib7000p_state *state = demod->demodulator_priv;
+ return dib7000p_cfg_gpio(state, num, dir, val);
+}
+
+EXPORT_SYMBOL(dib7000p_set_gpio);
+static u16 dib7000p_defaults[] =
+
+{
+ // auto search configuration
+ 3, 2,
+ 0x0004,
+ 0x1000,
+ 0x0814, /* Equal Lock */
+
+ 12, 6,
+ 0x001b,
+ 0x7740,
+ 0x005b,
+ 0x8d80,
+ 0x01c9,
+ 0xc380,
+ 0x0000,
+ 0x0080,
+ 0x0000,
+ 0x0090,
+ 0x0001,
+ 0xd4c0,
+
+ 1, 26,
+ 0x6680, // P_timf_alpha=6, P_corm_alpha=6, P_corm_thres=128 default: 6,4,26
+
+ /* set ADC level to -16 */
+ 11, 79,
+ (1 << 13) - 825 - 117,
+ (1 << 13) - 837 - 117,
+ (1 << 13) - 811 - 117,
+ (1 << 13) - 766 - 117,
+ (1 << 13) - 737 - 117,
+ (1 << 13) - 693 - 117,
+ (1 << 13) - 648 - 117,
+ (1 << 13) - 619 - 117,
+ (1 << 13) - 575 - 117,
+ (1 << 13) - 531 - 117,
+ (1 << 13) - 501 - 117,
+
+ 1, 142,
+ 0x0410, // P_palf_filter_on=1, P_palf_filter_freeze=0, P_palf_alpha_regul=16
+
+ /* disable power smoothing */
+ 8, 145,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+
+ 1, 154,
+ 1 << 13, // P_fft_freq_dir=1, P_fft_nb_to_cut=0
+
+ 1, 168,
+ 0x0ccd, // P_pha3_thres, default 0x3000
+
+// 1, 169,
+// 0x0010, // P_cti_use_cpe=0, P_cti_use_prog=0, P_cti_win_len=16, default: 0x0010
+
+ 1, 183,
+ 0x200f, // P_cspu_regul=512, P_cspu_win_cut=15, default: 0x2005
+
+ 5, 187,
+ 0x023d, // P_adp_regul_cnt=573, default: 410
+ 0x00a4, // P_adp_noise_cnt=
+ 0x00a4, // P_adp_regul_ext
+ 0x7ff0, // P_adp_noise_ext
+ 0x3ccc, // P_adp_fil
+
+ 1, 198,
+ 0x800, // P_equal_thres_wgn
+
+ 1, 222,
+ 0x0010, // P_fec_ber_rs_len=2
+
+ 1, 235,
+ 0x0062, // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
+
+ 2, 901,
+ 0x0006, // P_clk_cfg1
+ (3 << 10) | (1 << 6), // P_divclksel=3 P_divbitsel=1
+
+ 1, 905,
+ 0x2c8e, // Tuner IO bank: max drive (14mA) + divout pads max drive
+
+ 0,
+};
+
static int dib7000p_demod_reset(struct dib7000p_state *state)
{
dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
@@ -292,111 +489,307 @@ static int dib7000p_demod_reset(struct dib7000p_state *state)
dib7000p_reset_pll(state);
if (dib7000p_reset_gpio(state) != 0)
- dprintk("-E- GPIO reset was not successful.\n");
+ dprintk( "GPIO reset was not successful.");
if (dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
- dprintk("-E- OUTPUT_MODE could not be resetted.\n");
+ dprintk( "OUTPUT_MODE could not be reset.");
/* unforce divstr regardless whether i2c enumeration was done or not */
dib7000p_write_word(state, 1285, dib7000p_read_word(state, 1285) & ~(1 << 1) );
+ dib7000p_set_bandwidth(state, 8000);
+
+ dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON);
+ dib7000p_sad_calib(state);
+ dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
+
+ // P_iqc_alpha_pha, P_iqc_alpha_amp_dcc_alpha, ...
+ if(state->cfg.tuner_is_baseband)
+ dib7000p_write_word(state, 36,0x0755);
+ else
+ dib7000p_write_word(state, 36,0x1f55);
+
+ dib7000p_write_tab(state, dib7000p_defaults);
+
dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY);
+
return 0;
}
+static void dib7000p_pll_clk_cfg(struct dib7000p_state *state)
+{
+ u16 tmp = 0;
+ tmp = dib7000p_read_word(state, 903);
+ dib7000p_write_word(state, 903, (tmp | 0x1)); //pwr-up pll
+ tmp = dib7000p_read_word(state, 900);
+ dib7000p_write_word(state, 900, (tmp & 0x7fff) | (1 << 6)); //use High freq clock
+}
+
static void dib7000p_restart_agc(struct dib7000p_state *state)
{
// P_restart_iqc & P_restart_agc
- dib7000p_write_word(state, 770, 0x0c00);
+ dib7000p_write_word(state, 770, (1 << 11) | (1 << 9));
dib7000p_write_word(state, 770, 0x0000);
}
-static void dib7000p_update_lna(struct dib7000p_state *state)
+static int dib7000p_update_lna(struct dib7000p_state *state)
{
- int i;
u16 dyn_gain;
// when there is no LNA to program return immediatly
- if (state->cfg.update_lna == NULL)
- return;
-
- for (i = 0; i < 5; i++) {
- // read dyn_gain here (because it is demod-dependent and not tuner)
+ if (state->cfg.update_lna) {
+ // read dyn_gain here (because it is demod-dependent and not fe)
dyn_gain = dib7000p_read_word(state, 394);
-
if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
dib7000p_restart_agc(state);
- msleep(5);
- } else
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static int dib7000p_set_agc_config(struct dib7000p_state *state, u8 band)
+{
+ struct dibx000_agc_config *agc = NULL;
+ int i;
+ if (state->current_band == band && state->current_agc != NULL)
+ return 0;
+ state->current_band = band;
+
+ for (i = 0; i < state->cfg.agc_config_count; i++)
+ if (state->cfg.agc[i].band_caps & band) {
+ agc = &state->cfg.agc[i];
break;
+ }
+
+ if (agc == NULL) {
+ dprintk( "no valid AGC configuration found for band 0x%02x",band);
+ return -EINVAL;
}
+
+ state->current_agc = agc;
+
+ /* AGC */
+ dib7000p_write_word(state, 75 , agc->setup );
+ dib7000p_write_word(state, 76 , agc->inv_gain );
+ dib7000p_write_word(state, 77 , agc->time_stabiliz );
+ dib7000p_write_word(state, 100, (agc->alpha_level << 12) | agc->thlock);
+
+ // Demod AGC loop configuration
+ dib7000p_write_word(state, 101, (agc->alpha_mant << 5) | agc->alpha_exp);
+ dib7000p_write_word(state, 102, (agc->beta_mant << 6) | agc->beta_exp);
+
+ /* AGC continued */
+ dprintk( "WBD: ref: %d, sel: %d, active: %d, alpha: %d",
+ state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
+
+ if (state->wbd_ref != 0)
+ dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | state->wbd_ref);
+ else
+ dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | agc->wbd_ref);
+
+ dib7000p_write_word(state, 106, (agc->wbd_sel << 13) | (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8));
+
+ dib7000p_write_word(state, 107, agc->agc1_max);
+ dib7000p_write_word(state, 108, agc->agc1_min);
+ dib7000p_write_word(state, 109, agc->agc2_max);
+ dib7000p_write_word(state, 110, agc->agc2_min);
+ dib7000p_write_word(state, 111, (agc->agc1_pt1 << 8) | agc->agc1_pt2);
+ dib7000p_write_word(state, 112, agc->agc1_pt3);
+ dib7000p_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
+ dib7000p_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
+ dib7000p_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
+ return 0;
}
-static void dib7000p_pll_clk_cfg(struct dib7000p_state *state)
+static int dib7000p_agc_startup(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
{
- u16 tmp = 0;
- tmp = dib7000p_read_word(state, 903);
- dib7000p_write_word(state, 903, (tmp | 0x1)); //pwr-up pll
- tmp = dib7000p_read_word(state, 900);
- dib7000p_write_word(state, 900, (tmp & 0x7fff) | (1 << 6)); //use High freq clock
+ struct dib7000p_state *state = demod->demodulator_priv;
+ int ret = -1;
+ u8 *agc_state = &state->agc_state;
+ u8 agc_split;
+
+ switch (state->agc_state) {
+ case 0:
+ // set power-up level: interf+analog+AGC
+ dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
+ dib7000p_set_adc_state(state, DIBX000_ADC_ON);
+ dib7000p_pll_clk_cfg(state);
+
+ if (dib7000p_set_agc_config(state, BAND_OF_FREQUENCY(ch->frequency/1000)) != 0)
+ return -1;
+
+ ret = 7;
+ (*agc_state)++;
+ break;
+
+ case 1:
+ // AGC initialization
+ if (state->cfg.agc_control)
+ state->cfg.agc_control(&state->demod, 1);
+
+ dib7000p_write_word(state, 78, 32768);
+ if (!state->current_agc->perform_agc_softsplit) {
+ /* we are using the wbd - so slow AGC startup */
+ /* force 0 split on WBD and restart AGC */
+ dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (state->current_agc->wbd_alpha << 9) | (1 << 8));
+ (*agc_state)++;
+ ret = 5;
+ } else {
+ /* default AGC startup */
+ (*agc_state) = 4;
+ /* wait AGC rough lock time */
+ ret = 7;
+ }
+
+ dib7000p_restart_agc(state);
+ break;
+
+ case 2: /* fast split search path after 5sec */
+ dib7000p_write_word(state, 75, state->current_agc->setup | (1 << 4)); /* freeze AGC loop */
+ dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (2 << 9) | (0 << 8)); /* fast split search 0.25kHz */
+ (*agc_state)++;
+ ret = 14;
+ break;
+
+ case 3: /* split search ended */
+ agc_split = (u8)dib7000p_read_word(state, 396); /* store the split value for the next time */
+ dib7000p_write_word(state, 78, dib7000p_read_word(state, 394)); /* set AGC gain start value */
+
+ dib7000p_write_word(state, 75, state->current_agc->setup); /* std AGC loop */
+ dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (state->current_agc->wbd_alpha << 9) | agc_split); /* standard split search */
+
+ dib7000p_restart_agc(state);
+
+ dprintk( "SPLIT %p: %hd", demod, agc_split);
+
+ (*agc_state)++;
+ ret = 5;
+ break;
+
+ case 4: /* LNA startup */
+ // wait AGC accurate lock time
+ ret = 7;
+
+ if (dib7000p_update_lna(state))
+ // wait only AGC rough lock time
+ ret = 5;
+ else // nothing was done, go to the next state
+ (*agc_state)++;
+ break;
+
+ case 5:
+ if (state->cfg.agc_control)
+ state->cfg.agc_control(&state->demod, 0);
+ (*agc_state)++;
+ break;
+ default:
+ break;
+ }
+ return ret;
}
-static void dib7000p_update_timf_freq(struct dib7000p_state *state)
+static void dib7000p_update_timf(struct dib7000p_state *state)
{
u32 timf = (dib7000p_read_word(state, 427) << 16) | dib7000p_read_word(state, 428);
- state->timf = timf * 80 / (BW_INDEX_TO_KHZ(state->current_bandwidth) / 100);
+ state->timf = timf * 160 / (state->current_bandwidth / 50);
dib7000p_write_word(state, 23, (u16) (timf >> 16));
dib7000p_write_word(state, 24, (u16) (timf & 0xffff));
- dprintk("-D- Updated timf_frequency: %d (default: %d)\n",state->timf, state->cfg.bw->timf);
+ dprintk( "updated timf_frequency: %d (default: %d)",state->timf, state->cfg.bw->timf);
+
}
-static void dib7000p_set_channel(struct dib7000p_state *state, struct dibx000_ofdm_channel *ch, u8 seq)
+static void dib7000p_set_channel(struct dib7000p_state *state, struct dvb_frontend_parameters *ch, u8 seq)
{
- u16 tmp, est[4]; // reg_26, reg_32, reg_33, reg_187, reg_188, reg_189, reg_190, reg_207, reg_208;
+ u16 value, est[4];
+
+ dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth));
/* nfft, guard, qam, alpha */
- dib7000p_write_word(state, 0, (ch->nfft << 7) | (ch->guard << 5) | (ch->nqam << 3) | (ch->vit_alpha));
+ value = 0;
+ switch (ch->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_2K: value |= (0 << 7); break;
+ case /* 4K MODE */ 255: value |= (2 << 7); break;
+ default:
+ case TRANSMISSION_MODE_8K: value |= (1 << 7); break;
+ }
+ switch (ch->u.ofdm.guard_interval) {
+ case GUARD_INTERVAL_1_32: value |= (0 << 5); break;
+ case GUARD_INTERVAL_1_16: value |= (1 << 5); break;
+ case GUARD_INTERVAL_1_4: value |= (3 << 5); break;
+ default:
+ case GUARD_INTERVAL_1_8: value |= (2 << 5); break;
+ }
+ switch (ch->u.ofdm.constellation) {
+ case QPSK: value |= (0 << 3); break;
+ case QAM_16: value |= (1 << 3); break;
+ default:
+ case QAM_64: value |= (2 << 3); break;
+ }
+ switch (HIERARCHY_1) {
+ case HIERARCHY_2: value |= 2; break;
+ case HIERARCHY_4: value |= 4; break;
+ default:
+ case HIERARCHY_1: value |= 1; break;
+ }
+ dib7000p_write_word(state, 0, value);
dib7000p_write_word(state, 5, (seq << 4) | 1); /* do not force tps, search list 0 */
- /* P_dintl_native, P_dintlv_inv, P_vit_hrch, P_vit_code_rate, P_vit_select_hp */
- tmp = (ch->intlv_native << 6) | (ch->vit_hrch << 4) | (ch->vit_select_hp & 0x1);
- if (ch->vit_hrch == 0 || ch->vit_select_hp == 1)
- tmp |= (ch->vit_code_rate_hp << 1);
- else
- tmp |= (ch->vit_code_rate_lp << 1);
- dib7000p_write_word(state, 208, tmp);
+ /* P_dintl_native, P_dintlv_inv, P_hrch, P_code_rate, P_select_hp */
+ value = 0;
+ if (1 != 0)
+ value |= (1 << 6);
+ if (ch->u.ofdm.hierarchy_information == 1)
+ value |= (1 << 4);
+ if (1 == 1)
+ value |= 1;
+ switch ((ch->u.ofdm.hierarchy_information == 0 || 1 == 1) ? ch->u.ofdm.code_rate_HP : ch->u.ofdm.code_rate_LP) {
+ case FEC_2_3: value |= (2 << 1); break;
+ case FEC_3_4: value |= (3 << 1); break;
+ case FEC_5_6: value |= (5 << 1); break;
+ case FEC_7_8: value |= (7 << 1); break;
+ default:
+ case FEC_1_2: value |= (1 << 1); break;
+ }
+ dib7000p_write_word(state, 208, value);
+
+ /* offset loop parameters */
+ dib7000p_write_word(state, 26, 0x6680); // timf(6xxx)
+ dib7000p_write_word(state, 32, 0x0003); // pha_off_max(xxx3)
+ dib7000p_write_word(state, 29, 0x1273); // isi
+ dib7000p_write_word(state, 33, 0x0005); // sfreq(xxx5)
/* P_dvsy_sync_wait */
- switch (ch->nfft) {
- case 1: tmp = 256; break;
- case 2: tmp = 128; break;
- case 0:
- default: tmp = 64; break;
+ switch (ch->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_8K: value = 256; break;
+ case /* 4K MODE */ 255: value = 128; break;
+ case TRANSMISSION_MODE_2K:
+ default: value = 64; break;
}
- tmp *= ((1 << (ch->guard)) * 3 / 2); // add 50% SFN margin
- tmp <<= 4;
-
- /* deactive the possibility of diversity reception if extended interleave */
- /* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
- if (ch->intlv_native || ch->nfft == 1)
- tmp |= (1 << 2) | (2 << 0);
- dib7000p_write_word(state, 207, tmp);
+ switch (ch->u.ofdm.guard_interval) {
+ case GUARD_INTERVAL_1_16: value *= 2; break;
+ case GUARD_INTERVAL_1_8: value *= 4; break;
+ case GUARD_INTERVAL_1_4: value *= 8; break;
+ default:
+ case GUARD_INTERVAL_1_32: value *= 1; break;
+ }
+ state->div_sync_wait = (value * 3) / 2 + 32; // add 50% SFN margin + compensate for one DVSY-fifo TODO
- dib7000p_write_word(state, 26, 0x6680); // timf(6xxx)
- dib7000p_write_word(state, 29, 0x1273); // isi inh1273 on1073
- dib7000p_write_word(state, 32, 0x0003); // pha_off_max(xxx3)
- dib7000p_write_word(state, 33, 0x0005); // sfreq(xxx5)
+ /* deactive the possibility of diversity reception if extended interleaver */
+ state->div_force_off = !1 && ch->u.ofdm.transmission_mode != TRANSMISSION_MODE_8K;
+ dib7000p_set_diversity_in(&state->demod, state->div_state);
/* channel estimation fine configuration */
- switch (ch->nqam) {
- case 2:
+ switch (ch->u.ofdm.constellation) {
+ case QAM_64:
est[0] = 0x0148; /* P_adp_regul_cnt 0.04 */
est[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */
est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
est[3] = 0xfff8; /* P_adp_noise_ext -0.001 */
break;
- case 1:
+ case QAM_16:
est[0] = 0x023d; /* P_adp_regul_cnt 0.07 */
est[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */
est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
@@ -409,66 +802,45 @@ static void dib7000p_set_channel(struct dib7000p_state *state, struct dibx000_of
est[3] = 0xfff8; /* P_adp_noise_ext -0.002 */
break;
}
- for (tmp = 0; tmp < 4; tmp++)
- dib7000p_write_word(state, 187 + tmp, est[tmp]);
-
- // set power-up level: interf+analog+AGC
- dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
- dib7000p_set_adc_state(state, DIBX000_ADC_ON);
- dib7000p_pll_clk_cfg(state);
- msleep(7);
-
- // AGC initialization
- if (state->cfg.agc_control)
- state->cfg.agc_control(&state->demod, 1);
-
- dib7000p_restart_agc(state);
-
- // wait AGC rough lock time
- msleep(5);
-
- dib7000p_update_lna(state);
-
- // wait AGC accurate lock time
- msleep(7);
- if (state->cfg.agc_control)
- state->cfg.agc_control(&state->demod, 0);
+ for (value = 0; value < 4; value++)
+ dib7000p_write_word(state, 187 + value, est[value]);
}
-static int dib7000p_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+static int dib7000p_autosearch_start(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
{
struct dib7000p_state *state = demod->demodulator_priv;
- struct dibx000_ofdm_channel auto_ch;
- u32 value;
-
- INIT_OFDM_CHANNEL(&auto_ch);
- auto_ch.RF_kHz = ch->RF_kHz;
- auto_ch.Bw = ch->Bw;
- auto_ch.nqam = 2;
- auto_ch.guard = 0;
- auto_ch.nfft = 1;
- auto_ch.vit_alpha = 1;
- auto_ch.vit_select_hp = 1;
- auto_ch.vit_code_rate_hp = 2;
- auto_ch.vit_code_rate_lp = 3;
- auto_ch.vit_hrch = 0;
- auto_ch.intlv_native = 1;
-
- dib7000p_set_channel(state, &auto_ch, 7);
+ struct dvb_frontend_parameters schan;
+ u32 value, factor;
+
+ schan = *ch;
+ schan.u.ofdm.constellation = QAM_64;
+ schan.u.ofdm.guard_interval = GUARD_INTERVAL_1_32;
+ schan.u.ofdm.transmission_mode = TRANSMISSION_MODE_8K;
+ schan.u.ofdm.code_rate_HP = FEC_2_3;
+ schan.u.ofdm.code_rate_LP = FEC_3_4;
+ schan.u.ofdm.hierarchy_information = 0;
+
+ dib7000p_set_channel(state, &schan, 7);
+
+ factor = BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth);
+ if (factor >= 5000)
+ factor = 1;
+ else
+ factor = 6;
// always use the setting for 8MHz here lock_time for 7,6 MHz are longer
- value = 30 * state->cfg.bw->internal;
+ value = 30 * state->cfg.bw->internal * factor;
dib7000p_write_word(state, 6, (u16) ((value >> 16) & 0xffff)); // lock0 wait time
dib7000p_write_word(state, 7, (u16) (value & 0xffff)); // lock0 wait time
- value = 100 * state->cfg.bw->internal;
+ value = 100 * state->cfg.bw->internal * factor;
dib7000p_write_word(state, 8, (u16) ((value >> 16) & 0xffff)); // lock1 wait time
dib7000p_write_word(state, 9, (u16) (value & 0xffff)); // lock1 wait time
- value = 500 * state->cfg.bw->internal;
+ value = 500 * state->cfg.bw->internal * factor;
dib7000p_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
dib7000p_write_word(state, 11, (u16) (value & 0xffff)); // lock2 wait time
value = dib7000p_read_word(state, 0);
- dib7000p_write_word(state, 0, (1 << 9) | value);
+ dib7000p_write_word(state, 0, (u16) ((1 << 9) | value));
dib7000p_read_word(state, 1284);
dib7000p_write_word(state, 0, (u16) value);
@@ -489,7 +861,95 @@ static int dib7000p_autosearch_is_irq(struct dvb_frontend *demod)
return 0; // still pending
}
-static int dib7000p_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+static void dib7000p_spur_protect(struct dib7000p_state *state, u32 rf_khz, u32 bw)
+{
+ static s16 notch[]={16143, 14402, 12238, 9713, 6902, 3888, 759, -2392};
+ static u8 sine [] ={0, 2, 3, 5, 6, 8, 9, 11, 13, 14, 16, 17, 19, 20, 22,
+ 24, 25, 27, 28, 30, 31, 33, 34, 36, 38, 39, 41, 42, 44, 45, 47, 48, 50, 51,
+ 53, 55, 56, 58, 59, 61, 62, 64, 65, 67, 68, 70, 71, 73, 74, 76, 77, 79, 80,
+ 82, 83, 85, 86, 88, 89, 91, 92, 94, 95, 97, 98, 99, 101, 102, 104, 105,
+ 107, 108, 109, 111, 112, 114, 115, 117, 118, 119, 121, 122, 123, 125, 126,
+ 128, 129, 130, 132, 133, 134, 136, 137, 138, 140, 141, 142, 144, 145, 146,
+ 147, 149, 150, 151, 152, 154, 155, 156, 157, 159, 160, 161, 162, 164, 165,
+ 166, 167, 168, 170, 171, 172, 173, 174, 175, 177, 178, 179, 180, 181, 182,
+ 183, 184, 185, 186, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198,
+ 199, 200, 201, 202, 203, 204, 205, 206, 207, 207, 208, 209, 210, 211, 212,
+ 213, 214, 215, 215, 216, 217, 218, 219, 220, 220, 221, 222, 223, 224, 224,
+ 225, 226, 227, 227, 228, 229, 229, 230, 231, 231, 232, 233, 233, 234, 235,
+ 235, 236, 237, 237, 238, 238, 239, 239, 240, 241, 241, 242, 242, 243, 243,
+ 244, 244, 245, 245, 245, 246, 246, 247, 247, 248, 248, 248, 249, 249, 249,
+ 250, 250, 250, 251, 251, 251, 252, 252, 252, 252, 253, 253, 253, 253, 254,
+ 254, 254, 254, 254, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
+ 255, 255, 255, 255, 255, 255};
+
+ u32 xtal = state->cfg.bw->xtal_hz / 1000;
+ int f_rel = ( (rf_khz + xtal/2) / xtal) * xtal - rf_khz;
+ int k;
+ int coef_re[8],coef_im[8];
+ int bw_khz = bw;
+ u32 pha;
+
+ dprintk( "relative position of the Spur: %dk (RF: %dk, XTAL: %dk)", f_rel, rf_khz, xtal);
+
+
+ if (f_rel < -bw_khz/2 || f_rel > bw_khz/2)
+ return;
+
+ bw_khz /= 100;
+
+ dib7000p_write_word(state, 142 ,0x0610);
+
+ for (k = 0; k < 8; k++) {
+ pha = ((f_rel * (k+1) * 112 * 80/bw_khz) /1000) & 0x3ff;
+
+ if (pha==0) {
+ coef_re[k] = 256;
+ coef_im[k] = 0;
+ } else if(pha < 256) {
+ coef_re[k] = sine[256-(pha&0xff)];
+ coef_im[k] = sine[pha&0xff];
+ } else if (pha == 256) {
+ coef_re[k] = 0;
+ coef_im[k] = 256;
+ } else if (pha < 512) {
+ coef_re[k] = -sine[pha&0xff];
+ coef_im[k] = sine[256 - (pha&0xff)];
+ } else if (pha == 512) {
+ coef_re[k] = -256;
+ coef_im[k] = 0;
+ } else if (pha < 768) {
+ coef_re[k] = -sine[256-(pha&0xff)];
+ coef_im[k] = -sine[pha&0xff];
+ } else if (pha == 768) {
+ coef_re[k] = 0;
+ coef_im[k] = -256;
+ } else {
+ coef_re[k] = sine[pha&0xff];
+ coef_im[k] = -sine[256 - (pha&0xff)];
+ }
+
+ coef_re[k] *= notch[k];
+ coef_re[k] += (1<<14);
+ if (coef_re[k] >= (1<<24))
+ coef_re[k] = (1<<24) - 1;
+ coef_re[k] /= (1<<15);
+
+ coef_im[k] *= notch[k];
+ coef_im[k] += (1<<14);
+ if (coef_im[k] >= (1<<24))
+ coef_im[k] = (1<<24)-1;
+ coef_im[k] /= (1<<15);
+
+ dprintk( "PALF COEF: %d re: %d im: %d", k, coef_re[k], coef_im[k]);
+
+ dib7000p_write_word(state, 143, (0 << 14) | (k << 10) | (coef_re[k] & 0x3ff));
+ dib7000p_write_word(state, 144, coef_im[k] & 0x3ff);
+ dib7000p_write_word(state, 143, (1 << 14) | (k << 10) | (coef_re[k] & 0x3ff));
+ }
+ dib7000p_write_word(state,143 ,0);
+}
+
+static int dib7000p_tune(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
{
struct dib7000p_state *state = demod->demodulator_priv;
u16 tmp = 0;
@@ -505,7 +965,15 @@ static int dib7000p_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel
msleep(45);
/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
- dib7000p_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
+ tmp = (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3);
+ if (state->sfn_workaround_active) {
+ dprintk( "SFN workaround is active");
+ tmp |= (1 << 9);
+ dib7000p_write_word(state, 166, 0x4000); // P_pha3_force_pha_shift
+ } else {
+ dib7000p_write_word(state, 166, 0x0000); // P_pha3_force_pha_shift
+ }
+ dib7000p_write_word(state, 29, tmp);
// never achieved a lock with that bandwidth so far - wait for osc-freq to update
if (state->timf == 0)
@@ -515,28 +983,31 @@ static int dib7000p_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel
/* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
tmp = (6 << 8) | 0x80;
- switch (ch->nfft) {
- case 0: tmp |= (7 << 12); break;
- case 1: tmp |= (9 << 12); break;
- case 2: tmp |= (8 << 12); break;
+ switch (ch->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_2K: tmp |= (7 << 12); break;
+ case /* 4K MODE */ 255: tmp |= (8 << 12); break;
+ default:
+ case TRANSMISSION_MODE_8K: tmp |= (9 << 12); break;
}
dib7000p_write_word(state, 26, tmp); /* timf_a(6xxx) */
/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
tmp = (0 << 4);
- switch (ch->nfft) {
- case 0: tmp |= 0x6; break;
- case 1: tmp |= 0x8; break;
- case 2: tmp |= 0x7; break;
+ switch (ch->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_2K: tmp |= 0x6; break;
+ case /* 4K MODE */ 255: tmp |= 0x7; break;
+ default:
+ case TRANSMISSION_MODE_8K: tmp |= 0x8; break;
}
dib7000p_write_word(state, 32, tmp);
/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
tmp = (0 << 4);
- switch (ch->nfft) {
- case 0: tmp |= 0x6; break;
- case 1: tmp |= 0x8; break;
- case 2: tmp |= 0x7; break;
+ switch (ch->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_2K: tmp |= 0x6; break;
+ case /* 4K MODE */ 255: tmp |= 0x7; break;
+ default:
+ case TRANSMISSION_MODE_8K: tmp |= 0x8; break;
}
dib7000p_write_word(state, 33, tmp);
@@ -552,131 +1023,21 @@ static int dib7000p_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel
// we achieved a lock - it's time to update the osc freq
if ((tmp >> 6) & 0x1)
- dib7000p_update_timf_freq(state);
+ dib7000p_update_timf(state);
+ if (state->cfg.spur_protect)
+ dib7000p_spur_protect(state, ch->frequency/1000, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth));
+
+ dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth));
return 0;
}
-static int dib7000p_init(struct dvb_frontend *demod)
+static int dib7000p_wakeup(struct dvb_frontend *demod)
{
- struct dibx000_agc_config *agc;
struct dib7000p_state *state = demod->demodulator_priv;
- int ret = 0;
-
- // Demodulator default configuration
- agc = state->cfg.agc;
-
dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON);
-
- /* AGC */
- ret |= dib7000p_write_word(state, 75 , agc->setup );
- ret |= dib7000p_write_word(state, 76 , agc->inv_gain );
- ret |= dib7000p_write_word(state, 77 , agc->time_stabiliz );
- ret |= dib7000p_write_word(state, 100, (agc->alpha_level << 12) | agc->thlock);
-
- // Demod AGC loop configuration
- ret |= dib7000p_write_word(state, 101, (agc->alpha_mant << 5) | agc->alpha_exp);
- ret |= dib7000p_write_word(state, 102, (agc->beta_mant << 6) | agc->beta_exp);
-
- /* AGC continued */
- dprintk("-D- WBD: ref: %d, sel: %d, active: %d, alpha: %d\n",
- state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
-
- if (state->wbd_ref != 0)
- ret |= dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | state->wbd_ref);
- else
- ret |= dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | agc->wbd_ref);
-
- ret |= dib7000p_write_word(state, 106, (agc->wbd_sel << 13) | (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) );
-
- ret |= dib7000p_write_word(state, 107, agc->agc1_max);
- ret |= dib7000p_write_word(state, 108, agc->agc1_min);
- ret |= dib7000p_write_word(state, 109, agc->agc2_max);
- ret |= dib7000p_write_word(state, 110, agc->agc2_min);
- ret |= dib7000p_write_word(state, 111, (agc->agc1_pt1 << 8) | agc->agc1_pt2 );
- ret |= dib7000p_write_word(state, 112, agc->agc1_pt3);
- ret |= dib7000p_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
- ret |= dib7000p_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
- ret |= dib7000p_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
-
- /* disable power smoothing */
- ret |= dib7000p_write_word(state, 145, 0);
- ret |= dib7000p_write_word(state, 146, 0);
- ret |= dib7000p_write_word(state, 147, 0);
- ret |= dib7000p_write_word(state, 148, 0);
- ret |= dib7000p_write_word(state, 149, 0);
- ret |= dib7000p_write_word(state, 150, 0);
- ret |= dib7000p_write_word(state, 151, 0);
- ret |= dib7000p_write_word(state, 152, 0);
-
- // P_timf_alpha=6, P_corm_alpha=6, P_corm_thres=128 default: 6,4,26
- ret |= dib7000p_write_word(state, 26 ,0x6680);
-
- // P_palf_filter_on=1, P_palf_filter_freeze=0, P_palf_alpha_regul=16
- ret |= dib7000p_write_word(state, 142,0x0410);
- // P_fft_freq_dir=1, P_fft_nb_to_cut=0
- ret |= dib7000p_write_word(state, 154,1 << 13);
- // P_pha3_thres, default 0x3000
- ret |= dib7000p_write_word(state, 168,0x0ccd);
- // P_cti_use_cpe=0, P_cti_use_prog=0, P_cti_win_len=16, default: 0x0010
- //ret |= dib7000p_write_word(state, 169,0x0010);
- // P_cspu_regul=512, P_cspu_win_cut=15, default: 0x2005
- ret |= dib7000p_write_word(state, 183,0x200f);
- // P_adp_regul_cnt=573, default: 410
- ret |= dib7000p_write_word(state, 187,0x023d);
- // P_adp_noise_cnt=
- ret |= dib7000p_write_word(state, 188,0x00a4);
- // P_adp_regul_ext
- ret |= dib7000p_write_word(state, 189,0x00a4);
- // P_adp_noise_ext
- ret |= dib7000p_write_word(state, 190,0x7ff0);
- // P_adp_fil
- ret |= dib7000p_write_word(state, 191,0x3ccc);
-
- ret |= dib7000p_write_word(state, 222,0x0010);
- // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
- ret |= dib7000p_write_word(state, 235,0x0062);
-
- // P_iqc_alpha_pha, P_iqc_alpha_amp_dcc_alpha, ...
- if(state->cfg.tuner_is_baseband)
- ret |= dib7000p_write_word(state, 36,0x0755);
- else
- ret |= dib7000p_write_word(state, 36,0x1f55);
-
- // auto search configuration
- ret |= dib7000p_write_word(state, 2 ,0x0004);
- ret |= dib7000p_write_word(state, 3 ,0x1000);
-
- /* Equal Lock */
- ret |= dib7000p_write_word(state, 4 ,0x0814);
-
- ret |= dib7000p_write_word(state, 6 ,0x001b);
- ret |= dib7000p_write_word(state, 7 ,0x7740);
- ret |= dib7000p_write_word(state, 8 ,0x005b);
- ret |= dib7000p_write_word(state, 9 ,0x8d80);
- ret |= dib7000p_write_word(state, 10 ,0x01c9);
- ret |= dib7000p_write_word(state, 11 ,0xc380);
- ret |= dib7000p_write_word(state, 12 ,0x0000);
- ret |= dib7000p_write_word(state, 13 ,0x0080);
- ret |= dib7000p_write_word(state, 14 ,0x0000);
- ret |= dib7000p_write_word(state, 15 ,0x0090);
- ret |= dib7000p_write_word(state, 16 ,0x0001);
- ret |= dib7000p_write_word(state, 17 ,0xd4c0);
-
- // P_clk_cfg1
- ret |= dib7000p_write_word(state, 901, 0x0006);
-
- // P_divclksel=3 P_divbitsel=1
- ret |= dib7000p_write_word(state, 902, (3 << 10) | (1 << 6));
-
- // Tuner IO bank: max drive (14mA) + divout pads max drive
- ret |= dib7000p_write_word(state, 905, 0x2c8e);
-
- ret |= dib7000p_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ);
- dib7000p_sad_calib(state);
-
- return ret;
+ return 0;
}
static int dib7000p_sleep(struct dvb_frontend *demod)
@@ -688,16 +1049,16 @@ static int dib7000p_sleep(struct dvb_frontend *demod)
static int dib7000p_identify(struct dib7000p_state *st)
{
u16 value;
- dprintk("-I- DiB7000PC: checking demod on I2C address: %d (%x)\n",
+ dprintk( "checking demod on I2C address: %d (%x)",
st->i2c_addr, st->i2c_addr);
if ((value = dib7000p_read_word(st, 768)) != 0x01b3) {
- dprintk("-E- DiB7000PC: wrong Vendor ID (read=0x%x)\n",value);
+ dprintk( "wrong Vendor ID (read=0x%x)",value);
return -EREMOTEIO;
}
if ((value = dib7000p_read_word(st, 769)) != 0x4000) {
- dprintk("-E- DiB7000PC: wrong Device ID (%x)\n",value);
+ dprintk( "wrong Device ID (%x)",value);
return -EREMOTEIO;
}
@@ -767,41 +1128,48 @@ static int dib7000p_set_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
struct dib7000p_state *state = fe->demodulator_priv;
- struct dibx000_ofdm_channel ch;
-
- INIT_OFDM_CHANNEL(&ch);
- FEP2DIB(fep,&ch);
+ int time;
state->current_bandwidth = fep->u.ofdm.bandwidth;
- dib7000p_set_bandwidth(fe, fep->u.ofdm.bandwidth);
+ dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->u.ofdm.bandwidth));
+
+ /* maybe the parameter has been changed */
+ state->sfn_workaround_active = buggy_sfn_workaround;
if (fe->ops.tuner_ops.set_params)
fe->ops.tuner_ops.set_params(fe, fep);
+ /* start up the AGC */
+ state->agc_state = 0;
+ do {
+ time = dib7000p_agc_startup(fe, fep);
+ if (time != -1)
+ msleep(time);
+ } while (time != -1);
+
if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ||
fep->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO ||
fep->u.ofdm.constellation == QAM_AUTO ||
fep->u.ofdm.code_rate_HP == FEC_AUTO) {
int i = 800, found;
- dib7000p_autosearch_start(fe, &ch);
+ dib7000p_autosearch_start(fe, fep);
do {
msleep(1);
found = dib7000p_autosearch_is_irq(fe);
} while (found == 0 && i--);
- dprintk("autosearch returns: %d\n",found);
+ dprintk("autosearch returns: %d",found);
if (found == 0 || found == 1)
return 0; // no channel found
dib7000p_get_frontend(fe, fep);
- FEP2DIB(fep, &ch);
}
/* make this a config parameter */
dib7000p_set_output_mode(state, OUTMODE_MPEG2_FIFO);
- return dib7000p_tune(fe, &ch);
+ return dib7000p_tune(fe, fep);
}
static int dib7000p_read_status(struct dvb_frontend *fe, fe_status_t *stat)
@@ -879,7 +1247,7 @@ int dib7000pc_detection(struct i2c_adapter *i2c_adap)
if (i2c_transfer(i2c_adap, msg, 2) == 2)
if (rx[0] == 0x01 && rx[1] == 0xb3) {
- dprintk("-D- DiB7000PC detected\n");
+ dprintk("-D- DiB7000PC detected");
return 1;
}
@@ -887,11 +1255,11 @@ int dib7000pc_detection(struct i2c_adapter *i2c_adap)
if (i2c_transfer(i2c_adap, msg, 2) == 2)
if (rx[0] == 0x01 && rx[1] == 0xb3) {
- dprintk("-D- DiB7000PC detected\n");
+ dprintk("-D- DiB7000PC detected");
return 1;
}
- dprintk("-D- DiB7000PC not detected\n");
+ dprintk("-D- DiB7000PC not detected");
return 0;
}
EXPORT_SYMBOL(dib7000pc_detection);
@@ -929,7 +1297,7 @@ int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 defau
/* set new i2c address and force divstart */
dib7000p_write_word(&st, 1285, (new_addr << 2) | 0x2);
- dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr);
+ dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
}
for (k = 0; k < no_of_demods; k++) {
@@ -1000,7 +1368,7 @@ static struct dvb_frontend_ops dib7000p_ops = {
.release = dib7000p_release,
- .init = dib7000p_init,
+ .init = dib7000p_wakeup,
.sleep = dib7000p_sleep,
.set_frontend = dib7000p_set_frontend,
diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h
index 79465cf1ace..eefcac8b524 100644
--- a/drivers/media/dvb/frontends/dib7000p.h
+++ b/drivers/media/dvb/frontends/dib7000p.h
@@ -9,6 +9,7 @@ struct dib7000p_config {
u8 tuner_is_baseband;
int (*update_lna) (struct dvb_frontend *, u16 agc_global);
+ u8 agc_config_count;
struct dibx000_agc_config *agc;
struct dibx000_bandwidth_config *bw;
@@ -27,20 +28,19 @@ struct dib7000p_config {
u8 quartz_direct;
+ u8 spur_protect;
+
int (*agc_control) (struct dvb_frontend *, u8 before);
};
#define DEFAULT_DIB7000P_I2C_ADDRESS 18
extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg);
+extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]);
+
extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
extern int dib7000pc_detection(struct i2c_adapter *i2c_adap);
-
-/* TODO
-extern INT dib7000p_set_gpio(struct dibDemod *demod, UCHAR num, UCHAR dir, UCHAR val);
-extern INT dib7000p_enable_vbg_voltage(struct dibDemod *demod);
-extern void dib7000p_set_hostbus_diversity(struct dibDemod *demod, UCHAR onoff);
-extern USHORT dib7000p_get_current_agc_global(struct dibDemod *demod);
-*/
+extern int dib7000p_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val);
+extern int dib7000p_set_wbd_ref(struct dvb_frontend *, u16 value);
#endif
diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb/frontends/dibx000_common.h
index a1df604366c..5e17275afd2 100644
--- a/drivers/media/dvb/frontends/dibx000_common.h
+++ b/drivers/media/dvb/frontends/dibx000_common.h
@@ -111,6 +111,8 @@ struct dibx000_bandwidth_config {
u32 ifreq;
u32 timf;
+
+ u32 xtal_hz;
};
enum dibx000_adc_states {
@@ -122,56 +124,17 @@ enum dibx000_adc_states {
DIBX000_VBG_DISABLE,
};
-#define BW_INDEX_TO_KHZ(v) ( (v) == BANDWIDTH_8_MHZ ? 8000 : \
+#define BANDWIDTH_TO_KHZ(v) ( (v) == BANDWIDTH_8_MHZ ? 8000 : \
(v) == BANDWIDTH_7_MHZ ? 7000 : \
(v) == BANDWIDTH_6_MHZ ? 6000 : 8000 )
/* Chip output mode. */
-#define OUTMODE_HIGH_Z 0
-#define OUTMODE_MPEG2_PAR_GATED_CLK 1
-#define OUTMODE_MPEG2_PAR_CONT_CLK 2
-#define OUTMODE_MPEG2_SERIAL 7
-#define OUTMODE_DIVERSITY 4
-#define OUTMODE_MPEG2_FIFO 5
-
-/* I hope I can get rid of the following kludge in the near future */
-struct dibx000_ofdm_channel {
- u32 RF_kHz;
- u8 Bw;
- s16 nfft;
- s16 guard;
- s16 nqam;
- s16 vit_hrch;
- s16 vit_select_hp;
- s16 vit_alpha;
- s16 vit_code_rate_hp;
- s16 vit_code_rate_lp;
- u8 intlv_native;
-};
-
-#define FEP2DIB(fep,ch) \
- (ch)->RF_kHz = (fep)->frequency / 1000; \
- (ch)->Bw = (fep)->u.ofdm.bandwidth; \
- (ch)->nfft = (fep)->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ? -1 : (fep)->u.ofdm.transmission_mode; \
- (ch)->guard = (fep)->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO ? -1 : (fep)->u.ofdm.guard_interval; \
- (ch)->nqam = (fep)->u.ofdm.constellation == QAM_AUTO ? -1 : (fep)->u.ofdm.constellation == QAM_64 ? 2 : (fep)->u.ofdm.constellation; \
- (ch)->vit_hrch = 0; /* linux-dvb is not prepared for HIERARCHICAL TRANSMISSION */ \
- (ch)->vit_select_hp = 1; \
- (ch)->vit_alpha = 1; \
- (ch)->vit_code_rate_hp = (fep)->u.ofdm.code_rate_HP == FEC_AUTO ? -1 : (fep)->u.ofdm.code_rate_HP; \
- (ch)->vit_code_rate_lp = (fep)->u.ofdm.code_rate_LP == FEC_AUTO ? -1 : (fep)->u.ofdm.code_rate_LP; \
- (ch)->intlv_native = 1;
-
-#define INIT_OFDM_CHANNEL(ch) do {\
- (ch)->Bw = 0; \
- (ch)->nfft = -1; \
- (ch)->guard = -1; \
- (ch)->nqam = -1; \
- (ch)->vit_hrch = -1; \
- (ch)->vit_select_hp = -1; \
- (ch)->vit_alpha = -1; \
- (ch)->vit_code_rate_hp = -1; \
- (ch)->vit_code_rate_lp = -1; \
-} while (0)
+#define OUTMODE_HIGH_Z 0
+#define OUTMODE_MPEG2_PAR_GATED_CLK 1
+#define OUTMODE_MPEG2_PAR_CONT_CLK 2
+#define OUTMODE_MPEG2_SERIAL 7
+#define OUTMODE_DIVERSITY 4
+#define OUTMODE_MPEG2_FIFO 5
+#define OUTMODE_ANALOG_ADC 6
#endif
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index 11f7d5939bd..8c8d7342d0b 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -24,12 +24,48 @@
#include "dvb-pll.h"
+struct dvb_pll_priv {
+ /* pll number */
+ int nr;
+
+ /* i2c details */
+ int pll_i2c_address;
+ struct i2c_adapter *i2c;
+
+ /* the PLL descriptor */
+ struct dvb_pll_desc *pll_desc;
+
+ /* cached frequency/bandwidth */
+ u32 frequency;
+ u32 bandwidth;
+};
+
+#define DVB_PLL_MAX 64
+
+static unsigned int dvb_pll_devcount;
+
+static int debug = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable verbose debug messages");
+
+static unsigned int input[DVB_PLL_MAX] = { [ 0 ... (DVB_PLL_MAX-1) ] = 0 };
+module_param_array(input, int, NULL, 0644);
+MODULE_PARM_DESC(input,"specify rf input choice, 0 for autoselect (default)");
+
+static unsigned int id[DVB_PLL_MAX] =
+ { [ 0 ... (DVB_PLL_MAX-1) ] = DVB_PLL_UNDEFINED };
+module_param_array(id, int, NULL, 0644);
+MODULE_PARM_DESC(id, "force pll id to use (DEBUG ONLY)");
+
+/* ----------------------------------------------------------- */
+
struct dvb_pll_desc {
char *name;
u32 min;
u32 max;
u32 iffreq;
- void (*set)(u8 *buf, const struct dvb_frontend_parameters *params);
+ void (*set)(struct dvb_frontend *fe, u8 *buf,
+ const struct dvb_frontend_parameters *params);
u8 *initdata;
u8 *sleepdata;
int count;
@@ -89,7 +125,7 @@ static struct dvb_pll_desc dvb_pll_thomson_dtt7610 = {
},
};
-static void thomson_dtt759x_bw(u8 *buf,
+static void thomson_dtt759x_bw(struct dvb_frontend *fe, u8 *buf,
const struct dvb_frontend_parameters *params)
{
if (BANDWIDTH_7_MHZ == params->u.ofdm.bandwidth)
@@ -210,7 +246,8 @@ static struct dvb_pll_desc dvb_pll_env57h1xd5 = {
/* Philips TDA6650/TDA6651
* used in Panasonic ENV77H11D5
*/
-static void tda665x_bw(u8 *buf, const struct dvb_frontend_parameters *params)
+static void tda665x_bw(struct dvb_frontend *fe, u8 *buf,
+ const struct dvb_frontend_parameters *params)
{
if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ)
buf[3] |= 0x08;
@@ -243,7 +280,8 @@ static struct dvb_pll_desc dvb_pll_tda665x = {
/* Infineon TUA6034
* used in LG TDTP E102P
*/
-static void tua6034_bw(u8 *buf, const struct dvb_frontend_parameters *params)
+static void tua6034_bw(struct dvb_frontend *fe, u8 *buf,
+ const struct dvb_frontend_parameters *params)
{
if (BANDWIDTH_7_MHZ != params->u.ofdm.bandwidth)
buf[3] |= 0x08;
@@ -283,7 +321,8 @@ static struct dvb_pll_desc dvb_pll_lg_tdvs_h06xf = {
/* Philips FMD1216ME
* used in Medion Hybrid PCMCIA card and USB Box
*/
-static void fmd1216me_bw(u8 *buf, const struct dvb_frontend_parameters *params)
+static void fmd1216me_bw(struct dvb_frontend *fe, u8 *buf,
+ const struct dvb_frontend_parameters *params)
{
if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ &&
params->frequency >= 158870000)
@@ -313,7 +352,8 @@ static struct dvb_pll_desc dvb_pll_fmd1216me = {
/* ALPS TDED4
* used in Nebula-Cards and USB boxes
*/
-static void tded4_bw(u8 *buf, const struct dvb_frontend_parameters *params)
+static void tded4_bw(struct dvb_frontend *fe, u8 *buf,
+ const struct dvb_frontend_parameters *params)
{
if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ)
buf[3] |= 0x04;
@@ -354,16 +394,35 @@ static struct dvb_pll_desc dvb_pll_tdhu2 = {
/* Philips TUV1236D
* used in ATI HDTV Wonder
*/
-static void tuv1236d_rf(u8 *buf, const struct dvb_frontend_parameters *params)
+static void tuv1236d_rf(struct dvb_frontend *fe, u8 *buf,
+ const struct dvb_frontend_parameters *params)
{
- switch (params->u.vsb.modulation) {
- case QAM_64:
- case QAM_256:
+ struct dvb_pll_priv *priv = fe->tuner_priv;
+ unsigned int new_rf = input[priv->nr];
+
+ if ((new_rf == 0) || (new_rf > 2)) {
+ switch (params->u.vsb.modulation) {
+ case QAM_64:
+ case QAM_256:
+ new_rf = 1;
+ break;
+ case VSB_8:
+ default:
+ new_rf = 2;
+ }
+ }
+
+ switch (new_rf) {
+ case 1:
buf[3] |= 0x08;
break;
- case VSB_8:
- default:
+ case 2:
buf[3] &= ~0x08;
+ break;
+ default:
+ printk(KERN_WARNING
+ "%s: unhandled rf input selection: %d",
+ __FUNCTION__, new_rf);
}
}
@@ -420,7 +479,8 @@ static struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261 = {
/*
* Philips TD1316 Tuner.
*/
-static void td1316_bw(u8 *buf, const struct dvb_frontend_parameters *params)
+static void td1316_bw(struct dvb_frontend *fe, u8 *buf,
+ const struct dvb_frontend_parameters *params)
{
u8 band;
@@ -474,7 +534,8 @@ static struct dvb_pll_desc dvb_pll_thomson_fe6600 = {
}
};
-static void opera1_bw(u8 *buf, const struct dvb_frontend_parameters *params)
+static void opera1_bw(struct dvb_frontend *fe, u8 *buf,
+ const struct dvb_frontend_parameters *params)
{
if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ)
buf[2] |= 0x08;
@@ -546,30 +607,13 @@ static struct dvb_pll_desc *pll_list[] = {
};
/* ----------------------------------------------------------- */
-
-struct dvb_pll_priv {
- /* i2c details */
- int pll_i2c_address;
- struct i2c_adapter *i2c;
-
- /* the PLL descriptor */
- struct dvb_pll_desc *pll_desc;
-
- /* cached frequency/bandwidth */
- u32 frequency;
- u32 bandwidth;
-};
-
-/* ----------------------------------------------------------- */
/* code */
-static int debug = 0;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable verbose debug messages");
-
-static int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
+static int dvb_pll_configure(struct dvb_frontend *fe, u8 *buf,
const struct dvb_frontend_parameters *params)
{
+ struct dvb_pll_priv *priv = fe->tuner_priv;
+ struct dvb_pll_desc *desc = priv->pll_desc;
u32 div;
int i;
@@ -597,7 +641,7 @@ static int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
buf[3] = desc->entries[i].cb;
if (desc->set)
- desc->set(buf, params);
+ desc->set(fe, buf, params);
if (debug)
printk("pll: %s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n",
@@ -654,7 +698,7 @@ static int dvb_pll_set_params(struct dvb_frontend *fe,
if (priv->i2c == NULL)
return -EINVAL;
- if ((result = dvb_pll_configure(priv->pll_desc, buf, params)) < 0)
+ if ((result = dvb_pll_configure(fe, buf, params)) < 0)
return result;
else
frequency = result;
@@ -682,7 +726,7 @@ static int dvb_pll_calc_regs(struct dvb_frontend *fe,
if (buf_len < 5)
return -EINVAL;
- if ((result = dvb_pll_configure(priv->pll_desc, buf+1, params)) < 0)
+ if ((result = dvb_pll_configure(fe, buf+1, params)) < 0)
return result;
else
frequency = result;
@@ -755,6 +799,10 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
int ret;
struct dvb_pll_desc *desc;
+ if ((id[dvb_pll_devcount] > DVB_PLL_UNDEFINED) &&
+ (id[dvb_pll_devcount] < ARRAY_SIZE(pll_list)))
+ pll_desc_id = id[dvb_pll_devcount];
+
BUG_ON(pll_desc_id < 1 || pll_desc_id >= ARRAY_SIZE(pll_list));
desc = pll_list[pll_desc_id];
@@ -777,6 +825,7 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
priv->pll_i2c_address = pll_addr;
priv->i2c = i2c;
priv->pll_desc = desc;
+ priv->nr = dvb_pll_devcount++;
memcpy(&fe->ops.tuner_ops, &dvb_pll_tuner_ops,
sizeof(struct dvb_tuner_ops));
@@ -791,6 +840,30 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
fe->ops.tuner_ops.sleep = NULL;
fe->tuner_priv = priv;
+
+ if ((debug) || (id[priv->nr] == pll_desc_id)) {
+ printk("dvb-pll[%d]", priv->nr);
+ if (i2c != NULL)
+ printk(" %d-%04x", i2c_adapter_id(i2c), pll_addr);
+ printk(": id# %d (%s) attached, %s\n", pll_desc_id, desc->name,
+ id[priv->nr] == pll_desc_id ?
+ "insmod option" : "autodetected");
+ }
+ if ((debug) || (input[priv->nr] > 0)) {
+ printk("dvb-pll[%d]", priv->nr);
+ if (i2c != NULL)
+ printk(" %d-%04x", i2c_adapter_id(i2c), pll_addr);
+ printk(": tuner rf input will be ");
+ switch (input[priv->nr]) {
+ case 0:
+ printk("autoselected\n");
+ break;
+ default:
+ printk("set to input %d (insmod option)\n",
+ input[priv->nr]);
+ }
+ }
+
return fe;
}
EXPORT_SYMBOL(dvb_pll_attach);
diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb/frontends/dvb_dummy_fe.c
index 6271b1e7f6a..fed09dfb2b7 100644
--- a/drivers/media/dvb/frontends/dvb_dummy_fe.c
+++ b/drivers/media/dvb/frontends/dvb_dummy_fe.c
@@ -20,7 +20,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/slab.h>
diff --git a/drivers/media/dvb/frontends/isl6421.c b/drivers/media/dvb/frontends/isl6421.c
index c967148a594..684c8ec166c 100644
--- a/drivers/media/dvb/frontends/isl6421.c
+++ b/drivers/media/dvb/frontends/isl6421.c
@@ -29,7 +29,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/slab.h>
diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
index 1aeacb1c4af..443d9045d4c 100644
--- a/drivers/media/dvb/frontends/l64781.c
+++ b/drivers/media/dvb/frontends/l64781.c
@@ -23,7 +23,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/slab.h>
#include "dvb_frontend.h"
diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c
index e25286e2d43..bdc9fa88b86 100644
--- a/drivers/media/dvb/frontends/lgdt330x.c
+++ b/drivers/media/dvb/frontends/lgdt330x.c
@@ -35,7 +35,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
diff --git a/drivers/media/dvb/frontends/lnbp21.c b/drivers/media/dvb/frontends/lnbp21.c
index 2d2f58c2622..76f935d9755 100644
--- a/drivers/media/dvb/frontends/lnbp21.c
+++ b/drivers/media/dvb/frontends/lnbp21.c
@@ -28,7 +28,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/slab.h>
diff --git a/drivers/media/dvb/frontends/mt2060.c b/drivers/media/dvb/frontends/mt2060.c
index 450fad8d9b6..1305b0e63ce 100644
--- a/drivers/media/dvb/frontends/mt2060.c
+++ b/drivers/media/dvb/frontends/mt2060.c
@@ -22,7 +22,6 @@
/* In that file, frequencies are expressed in kiloHertz to avoid 32 bits overflows */
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/dvb/frontend.h>
#include <linux/i2c.h>
diff --git a/drivers/media/dvb/frontends/mt2131.c b/drivers/media/dvb/frontends/mt2131.c
new file mode 100644
index 00000000000..4b93931de4e
--- /dev/null
+++ b/drivers/media/dvb/frontends/mt2131.c
@@ -0,0 +1,314 @@
+/*
+ * Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dvb/frontend.h>
+#include <linux/i2c.h>
+
+#include "dvb_frontend.h"
+
+#include "mt2131.h"
+#include "mt2131_priv.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+#define dprintk(level,fmt, arg...) if (debug >= level) \
+ printk(KERN_INFO "%s: " fmt, "mt2131", ## arg)
+
+static u8 mt2131_config1[] = {
+ 0x01,
+ 0x50, 0x00, 0x50, 0x80, 0x00, 0x49, 0xfa, 0x88,
+ 0x08, 0x77, 0x41, 0x04, 0x00, 0x00, 0x00, 0x32,
+ 0x7f, 0xda, 0x4c, 0x00, 0x10, 0xaa, 0x78, 0x80,
+ 0xff, 0x68, 0xa0, 0xff, 0xdd, 0x00, 0x00
+};
+
+static u8 mt2131_config2[] = {
+ 0x10,
+ 0x7f, 0xc8, 0x0a, 0x5f, 0x00, 0x04
+};
+
+static int mt2131_readreg(struct mt2131_priv *priv, u8 reg, u8 *val)
+{
+ struct i2c_msg msg[2] = {
+ { .addr = priv->cfg->i2c_address, .flags = 0,
+ .buf = &reg, .len = 1 },
+ { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD,
+ .buf = val, .len = 1 },
+ };
+
+ if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+ printk(KERN_WARNING "mt2131 I2C read failed\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int mt2131_writereg(struct mt2131_priv *priv, u8 reg, u8 val)
+{
+ u8 buf[2] = { reg, val };
+ struct i2c_msg msg = { .addr = priv->cfg->i2c_address, .flags = 0,
+ .buf = buf, .len = 2 };
+
+ if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "mt2131 I2C write failed\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int mt2131_writeregs(struct mt2131_priv *priv,u8 *buf, u8 len)
+{
+ struct i2c_msg msg = { .addr = priv->cfg->i2c_address,
+ .flags = 0, .buf = buf, .len = len };
+
+ if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "mt2131 I2C write failed (len=%i)\n",
+ (int)len);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int mt2131_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct mt2131_priv *priv;
+ int ret=0, i;
+ u32 freq;
+ u8 if_band_center;
+ u32 f_lo1, f_lo2;
+ u32 div1, num1, div2, num2;
+ u8 b[8];
+ u8 lockval = 0;
+
+ priv = fe->tuner_priv;
+ if (fe->ops.info.type == FE_OFDM)
+ priv->bandwidth = params->u.ofdm.bandwidth;
+ else
+ priv->bandwidth = 0;
+
+ freq = params->frequency / 1000; // Hz -> kHz
+ dprintk(1, "%s() freq=%d\n", __FUNCTION__, freq);
+
+ f_lo1 = freq + MT2131_IF1 * 1000;
+ f_lo1 = (f_lo1 / 250) * 250;
+ f_lo2 = f_lo1 - freq - MT2131_IF2;
+
+ priv->frequency = (f_lo1 - f_lo2 - MT2131_IF2) * 1000,
+
+ /* Frequency LO1 = 16MHz * (DIV1 + NUM1/8192 ) */
+ num1 = f_lo1 * 64 / (MT2131_FREF / 128);
+ div1 = num1 / 8192;
+ num1 &= 0x1fff;
+
+ /* Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 ) */
+ num2 = f_lo2 * 64 / (MT2131_FREF / 128);
+ div2 = num2 / 8192;
+ num2 &= 0x1fff;
+
+ if (freq <= 82500) if_band_center = 0x00; else
+ if (freq <= 137500) if_band_center = 0x01; else
+ if (freq <= 192500) if_band_center = 0x02; else
+ if (freq <= 247500) if_band_center = 0x03; else
+ if (freq <= 302500) if_band_center = 0x04; else
+ if (freq <= 357500) if_band_center = 0x05; else
+ if (freq <= 412500) if_band_center = 0x06; else
+ if (freq <= 467500) if_band_center = 0x07; else
+ if (freq <= 522500) if_band_center = 0x08; else
+ if (freq <= 577500) if_band_center = 0x09; else
+ if (freq <= 632500) if_band_center = 0x0A; else
+ if (freq <= 687500) if_band_center = 0x0B; else
+ if (freq <= 742500) if_band_center = 0x0C; else
+ if (freq <= 797500) if_band_center = 0x0D; else
+ if (freq <= 852500) if_band_center = 0x0E; else
+ if (freq <= 907500) if_band_center = 0x0F; else
+ if (freq <= 962500) if_band_center = 0x10; else
+ if (freq <= 1017500) if_band_center = 0x11; else
+ if (freq <= 1072500) if_band_center = 0x12; else if_band_center = 0x13;
+
+ b[0] = 1;
+ b[1] = (num1 >> 5) & 0xFF;
+ b[2] = (num1 & 0x1F);
+ b[3] = div1;
+ b[4] = (num2 >> 5) & 0xFF;
+ b[5] = num2 & 0x1F;
+ b[6] = div2;
+
+ dprintk(1, "IF1: %dMHz IF2: %dMHz\n", MT2131_IF1, MT2131_IF2);
+ dprintk(1, "PLL freq=%dkHz band=%d\n", (int)freq, (int)if_band_center);
+ dprintk(1, "PLL f_lo1=%dkHz f_lo2=%dkHz\n", (int)f_lo1, (int)f_lo2);
+ dprintk(1, "PLL div1=%d num1=%d div2=%d num2=%d\n",
+ (int)div1, (int)num1, (int)div2, (int)num2);
+ dprintk(1, "PLL [1..6]: %2x %2x %2x %2x %2x %2x\n",
+ (int)b[1], (int)b[2], (int)b[3], (int)b[4], (int)b[5],
+ (int)b[6]);
+
+ ret = mt2131_writeregs(priv,b,7);
+ if (ret < 0)
+ return ret;
+
+ mt2131_writereg(priv, 0x0b, if_band_center);
+
+ /* Wait for lock */
+ i = 0;
+ do {
+ mt2131_readreg(priv, 0x08, &lockval);
+ if ((lockval & 0x88) == 0x88)
+ break;
+ msleep(4);
+ i++;
+ } while (i < 10);
+
+ return ret;
+}
+
+static int mt2131_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct mt2131_priv *priv = fe->tuner_priv;
+ dprintk(1, "%s()\n", __FUNCTION__);
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static int mt2131_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct mt2131_priv *priv = fe->tuner_priv;
+ dprintk(1, "%s()\n", __FUNCTION__);
+ *bandwidth = priv->bandwidth;
+ return 0;
+}
+
+static int mt2131_get_status(struct dvb_frontend *fe, u32 *status)
+{
+ struct mt2131_priv *priv = fe->tuner_priv;
+ u8 lock_status = 0;
+ u8 afc_status = 0;
+
+ *status = 0;
+
+ mt2131_readreg(priv, 0x08, &lock_status);
+ if ((lock_status & 0x88) == 0x88)
+ *status = TUNER_STATUS_LOCKED;
+
+ mt2131_readreg(priv, 0x09, &afc_status);
+ dprintk(1, "%s() - LO Status = 0x%x, AFC Status = 0x%x\n",
+ __FUNCTION__, lock_status, afc_status);
+
+ return 0;
+}
+
+static int mt2131_init(struct dvb_frontend *fe)
+{
+ struct mt2131_priv *priv = fe->tuner_priv;
+ int ret;
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ if ((ret = mt2131_writeregs(priv, mt2131_config1,
+ sizeof(mt2131_config1))) < 0)
+ return ret;
+
+ mt2131_writereg(priv, 0x0b, 0x09);
+ mt2131_writereg(priv, 0x15, 0x47);
+ mt2131_writereg(priv, 0x07, 0xf2);
+ mt2131_writereg(priv, 0x0b, 0x01);
+
+ if ((ret = mt2131_writeregs(priv, mt2131_config2,
+ sizeof(mt2131_config2))) < 0)
+ return ret;
+
+ return ret;
+}
+
+static int mt2131_release(struct dvb_frontend *fe)
+{
+ dprintk(1, "%s()\n", __FUNCTION__);
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+static const struct dvb_tuner_ops mt2131_tuner_ops = {
+ .info = {
+ .name = "Microtune MT2131",
+ .frequency_min = 48000000,
+ .frequency_max = 860000000,
+ .frequency_step = 50000,
+ },
+
+ .release = mt2131_release,
+ .init = mt2131_init,
+
+ .set_params = mt2131_set_params,
+ .get_frequency = mt2131_get_frequency,
+ .get_bandwidth = mt2131_get_bandwidth,
+ .get_status = mt2131_get_status
+};
+
+struct dvb_frontend * mt2131_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct mt2131_config *cfg, u16 if1)
+{
+ struct mt2131_priv *priv = NULL;
+ u8 id = 0;
+
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ priv = kzalloc(sizeof(struct mt2131_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+
+ priv->cfg = cfg;
+ priv->bandwidth = 6000000; /* 6MHz */
+ priv->i2c = i2c;
+
+ if (mt2131_readreg(priv, 0, &id) != 0) {
+ kfree(priv);
+ return NULL;
+ }
+ if ( (id != 0x3E) && (id != 0x3F) ) {
+ printk(KERN_ERR "MT2131: Device not found at addr 0x%02x\n",
+ cfg->i2c_address);
+ kfree(priv);
+ return NULL;
+ }
+
+ printk(KERN_INFO "MT2131: successfully identified at address 0x%02x\n",
+ cfg->i2c_address);
+ memcpy(&fe->ops.tuner_ops, &mt2131_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ fe->tuner_priv = priv;
+ return fe;
+}
+EXPORT_SYMBOL(mt2131_attach);
+
+MODULE_AUTHOR("Steven Toth");
+MODULE_DESCRIPTION("Microtune MT2131 silicon tuner driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ */
diff --git a/drivers/media/dvb/frontends/mt2131.h b/drivers/media/dvb/frontends/mt2131.h
new file mode 100644
index 00000000000..1e4ffe7dc8c
--- /dev/null
+++ b/drivers/media/dvb/frontends/mt2131.h
@@ -0,0 +1,54 @@
+/*
+ * Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MT2131_H__
+#define __MT2131_H__
+
+struct dvb_frontend;
+struct i2c_adapter;
+
+struct mt2131_config {
+ u8 i2c_address;
+ u8 clock_out; /* 0 = off, 1 = CLK/4, 2 = CLK/2, 3 = CLK/1 */
+};
+
+#if defined(CONFIG_DVB_TUNER_MT2131) || (defined(CONFIG_DVB_TUNER_MT2131_MODULE) && defined(MODULE))
+extern struct dvb_frontend* mt2131_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct mt2131_config *cfg,
+ u16 if1);
+#else
+static inline struct dvb_frontend* mt2131_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct mt2131_config *cfg,
+ u16 if1)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif /* CONFIG_DVB_TUNER_MT2131 */
+
+#endif /* __MT2131_H__ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ */
diff --git a/drivers/media/dvb/frontends/mt2131_priv.h b/drivers/media/dvb/frontends/mt2131_priv.h
new file mode 100644
index 00000000000..e930759c2c0
--- /dev/null
+++ b/drivers/media/dvb/frontends/mt2131_priv.h
@@ -0,0 +1,49 @@
+/*
+ * Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MT2131_PRIV_H__
+#define __MT2131_PRIV_H__
+
+/* Regs */
+#define MT2131_PWR 0x07
+#define MT2131_UPC_1 0x0b
+#define MT2131_AGC_RL 0x10
+#define MT2131_MISC_2 0x15
+
+/* frequency values in KHz */
+#define MT2131_IF1 1220
+#define MT2131_IF2 44000
+#define MT2131_FREF 16000
+
+struct mt2131_priv {
+ struct mt2131_config *cfg;
+ struct i2c_adapter *i2c;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+#endif /* __MT2131_PRIV_H__ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ */
diff --git a/drivers/media/dvb/frontends/mt2266.c b/drivers/media/dvb/frontends/mt2266.c
new file mode 100644
index 00000000000..03fe8265745
--- /dev/null
+++ b/drivers/media/dvb/frontends/mt2266.c
@@ -0,0 +1,287 @@
+/*
+ * Driver for Microtune MT2266 "Direct conversion low power broadband tuner"
+ *
+ * Copyright (c) 2007 Olivier DANET <odanet@caramail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dvb/frontend.h>
+#include <linux/i2c.h>
+
+#include "dvb_frontend.h"
+#include "mt2266.h"
+
+#define I2C_ADDRESS 0x60
+
+#define REG_PART_REV 0
+#define REG_TUNE 1
+#define REG_BAND 6
+#define REG_BANDWIDTH 8
+#define REG_LOCK 0x12
+
+#define PART_REV 0x85
+
+struct mt2266_priv {
+ struct mt2266_config *cfg;
+ struct i2c_adapter *i2c;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+/* Here, frequencies are expressed in kiloHertz to avoid 32 bits overflows */
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+#define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2266: " args); printk("\n"); }} while (0)
+
+// Reads a single register
+static int mt2266_readreg(struct mt2266_priv *priv, u8 reg, u8 *val)
+{
+ struct i2c_msg msg[2] = {
+ { .addr = priv->cfg->i2c_address, .flags = 0, .buf = &reg, .len = 1 },
+ { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, .buf = val, .len = 1 },
+ };
+ if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+ printk(KERN_WARNING "MT2266 I2C read failed\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+// Writes a single register
+static int mt2266_writereg(struct mt2266_priv *priv, u8 reg, u8 val)
+{
+ u8 buf[2] = { reg, val };
+ struct i2c_msg msg = {
+ .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2
+ };
+ if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "MT2266 I2C write failed\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+// Writes a set of consecutive registers
+static int mt2266_writeregs(struct mt2266_priv *priv,u8 *buf, u8 len)
+{
+ struct i2c_msg msg = {
+ .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = len
+ };
+ if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "MT2266 I2C write failed (len=%i)\n",(int)len);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+// Initialisation sequences
+static u8 mt2266_init1[] = {
+ REG_TUNE,
+ 0x00, 0x00, 0x28, 0x00, 0x52, 0x99, 0x3f };
+
+static u8 mt2266_init2[] = {
+ 0x17, 0x6d, 0x71, 0x61, 0xc0, 0xbf, 0xff, 0xdc, 0x00, 0x0a,
+ 0xd4, 0x03, 0x64, 0x64, 0x64, 0x64, 0x22, 0xaa, 0xf2, 0x1e, 0x80, 0x14, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x7f, 0x5e, 0x3f, 0xff, 0xff, 0xff, 0x00, 0x77, 0x0f, 0x2d };
+
+static u8 mt2266_init_8mhz[] = {
+ REG_BANDWIDTH,
+ 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22 };
+
+static u8 mt2266_init_7mhz[] = {
+ REG_BANDWIDTH,
+ 0x32, 0x32, 0x32, 0x32, 0x32, 0x32, 0x32, 0x32 };
+
+static u8 mt2266_init_6mhz[] = {
+ REG_BANDWIDTH,
+ 0xa7, 0xa7, 0xa7, 0xa7, 0xa7, 0xa7, 0xa7, 0xa7 };
+
+#define FREF 30000 // Quartz oscillator 30 MHz
+
+static int mt2266_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct mt2266_priv *priv;
+ int ret=0;
+ u32 freq;
+ u32 tune;
+ u8 lnaband;
+ u8 b[10];
+ int i;
+
+ priv = fe->tuner_priv;
+
+ mt2266_writereg(priv,0x17,0x6d);
+ mt2266_writereg(priv,0x1c,0xff);
+
+ freq = params->frequency / 1000; // Hz -> kHz
+ priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? params->u.ofdm.bandwidth : 0;
+ priv->frequency = freq * 1000;
+ tune=2 * freq * (8192/16) / (FREF/16);
+
+ if (freq <= 495000) lnaband = 0xEE; else
+ if (freq <= 525000) lnaband = 0xDD; else
+ if (freq <= 550000) lnaband = 0xCC; else
+ if (freq <= 580000) lnaband = 0xBB; else
+ if (freq <= 605000) lnaband = 0xAA; else
+ if (freq <= 630000) lnaband = 0x99; else
+ if (freq <= 655000) lnaband = 0x88; else
+ if (freq <= 685000) lnaband = 0x77; else
+ if (freq <= 710000) lnaband = 0x66; else
+ if (freq <= 735000) lnaband = 0x55; else
+ if (freq <= 765000) lnaband = 0x44; else
+ if (freq <= 802000) lnaband = 0x33; else
+ if (freq <= 840000) lnaband = 0x22; else lnaband = 0x11;
+
+ msleep(100);
+ mt2266_writeregs(priv,(params->u.ofdm.bandwidth==BANDWIDTH_6_MHZ)?mt2266_init_6mhz:
+ (params->u.ofdm.bandwidth==BANDWIDTH_7_MHZ)?mt2266_init_7mhz:
+ mt2266_init_8mhz,sizeof(mt2266_init_8mhz));
+
+ b[0] = REG_TUNE;
+ b[1] = (tune >> 8) & 0x1F;
+ b[2] = tune & 0xFF;
+ b[3] = tune >> 13;
+ mt2266_writeregs(priv,b,4);
+
+ dprintk("set_parms: tune=%d band=%d",(int)tune,(int)lnaband);
+ dprintk("set_parms: [1..3]: %2x %2x %2x",(int)b[1],(int)b[2],(int)b[3]);
+
+ b[0] = 0x05;
+ b[1] = 0x62;
+ b[2] = lnaband;
+ mt2266_writeregs(priv,b,3);
+
+ //Waits for pll lock or timeout
+ i = 0;
+ do {
+ mt2266_readreg(priv,REG_LOCK,b);
+ if ((b[0] & 0x40)==0x40)
+ break;
+ msleep(10);
+ i++;
+ } while (i<10);
+ dprintk("Lock when i=%i",(int)i);
+ return ret;
+}
+
+static void mt2266_calibrate(struct mt2266_priv *priv)
+{
+ mt2266_writereg(priv,0x11,0x03);
+ mt2266_writereg(priv,0x11,0x01);
+
+ mt2266_writeregs(priv,mt2266_init1,sizeof(mt2266_init1));
+ mt2266_writeregs(priv,mt2266_init2,sizeof(mt2266_init2));
+
+ mt2266_writereg(priv,0x33,0x5e);
+ mt2266_writereg(priv,0x10,0x10);
+ mt2266_writereg(priv,0x10,0x00);
+
+ mt2266_writeregs(priv,mt2266_init_8mhz,sizeof(mt2266_init_8mhz));
+
+ msleep(25);
+ mt2266_writereg(priv,0x17,0x6d);
+ mt2266_writereg(priv,0x1c,0x00);
+ msleep(75);
+ mt2266_writereg(priv,0x17,0x6d);
+ mt2266_writereg(priv,0x1c,0xff);
+}
+
+static int mt2266_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct mt2266_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static int mt2266_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct mt2266_priv *priv = fe->tuner_priv;
+ *bandwidth = priv->bandwidth;
+ return 0;
+}
+
+static int mt2266_init(struct dvb_frontend *fe)
+{
+ struct mt2266_priv *priv = fe->tuner_priv;
+ mt2266_writereg(priv,0x17,0x6d);
+ mt2266_writereg(priv,0x1c,0xff);
+ return 0;
+}
+
+static int mt2266_sleep(struct dvb_frontend *fe)
+{
+ struct mt2266_priv *priv = fe->tuner_priv;
+ mt2266_writereg(priv,0x17,0x6d);
+ mt2266_writereg(priv,0x1c,0x00);
+ return 0;
+}
+
+static int mt2266_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+static const struct dvb_tuner_ops mt2266_tuner_ops = {
+ .info = {
+ .name = "Microtune MT2266",
+ .frequency_min = 470000000,
+ .frequency_max = 860000000,
+ .frequency_step = 50000,
+ },
+ .release = mt2266_release,
+ .init = mt2266_init,
+ .sleep = mt2266_sleep,
+ .set_params = mt2266_set_params,
+ .get_frequency = mt2266_get_frequency,
+ .get_bandwidth = mt2266_get_bandwidth
+};
+
+struct dvb_frontend * mt2266_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2266_config *cfg)
+{
+ struct mt2266_priv *priv = NULL;
+ u8 id = 0;
+
+ priv = kzalloc(sizeof(struct mt2266_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+
+ priv->cfg = cfg;
+ priv->i2c = i2c;
+
+ if (mt2266_readreg(priv,0,&id) != 0) {
+ kfree(priv);
+ return NULL;
+ }
+ if (id != PART_REV) {
+ kfree(priv);
+ return NULL;
+ }
+ printk(KERN_INFO "MT2266: successfully identified\n");
+ memcpy(&fe->ops.tuner_ops, &mt2266_tuner_ops, sizeof(struct dvb_tuner_ops));
+
+ fe->tuner_priv = priv;
+ mt2266_calibrate(priv);
+ return fe;
+}
+EXPORT_SYMBOL(mt2266_attach);
+
+MODULE_AUTHOR("Olivier DANET");
+MODULE_DESCRIPTION("Microtune MT2266 silicon tuner driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/mt2266.h b/drivers/media/dvb/frontends/mt2266.h
new file mode 100644
index 00000000000..f31dd613ad3
--- /dev/null
+++ b/drivers/media/dvb/frontends/mt2266.h
@@ -0,0 +1,37 @@
+/*
+ * Driver for Microtune MT2266 "Direct conversion low power broadband tuner"
+ *
+ * Copyright (c) 2007 Olivier DANET <odanet@caramail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MT2266_H
+#define MT2266_H
+
+struct dvb_frontend;
+struct i2c_adapter;
+
+struct mt2266_config {
+ u8 i2c_address;
+};
+
+#if defined(CONFIG_DVB_TUNER_MT2266) || (defined(CONFIG_DVB_TUNER_MT2266_MODULE) && defined(MODULE))
+extern struct dvb_frontend * mt2266_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2266_config *cfg);
+#else
+static inline struct dvb_frontend * mt2266_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2266_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_TUNER_MT2266
+
+#endif
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 1ef82182564..0606b9a5b61 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -28,7 +28,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/slab.h>
diff --git a/drivers/media/dvb/frontends/mt352.c b/drivers/media/dvb/frontends/mt352.c
index 87e31ca7e10..5dd9b731f6f 100644
--- a/drivers/media/dvb/frontends/mt352.c
+++ b/drivers/media/dvb/frontends/mt352.c
@@ -32,7 +32,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
index ddc84899cf8..fcf964fe1d6 100644
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -44,7 +44,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/string.h>
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index 3cc8b444b8f..b314a1f2dee 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -36,7 +36,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c
index f46d5a46683..f02bd944595 100644
--- a/drivers/media/dvb/frontends/or51211.c
+++ b/drivers/media/dvb/frontends/or51211.c
@@ -32,7 +32,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/string.h>
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
new file mode 100644
index 00000000000..30e8a705fad
--- /dev/null
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -0,0 +1,729 @@
+/*
+ Samsung S5H1409 VSB/QAM demodulator driver
+
+ Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "dvb_frontend.h"
+#include "dvb-pll.h"
+#include "s5h1409.h"
+
+struct s5h1409_state {
+
+ struct i2c_adapter* i2c;
+
+ /* configuration settings */
+ const struct s5h1409_config* config;
+
+ struct dvb_frontend frontend;
+
+ /* previous uncorrected block counter */
+ fe_modulation_t current_modulation;
+
+ u32 current_frequency;
+};
+
+static int debug = 0;
+#define dprintk if (debug) printk
+
+/* Register values to initialise the demod, this will set VSB by default */
+static struct init_tab {
+ u8 reg;
+ u16 data;
+} init_tab[] = {
+ { 0x00, 0x0071, },
+ { 0x01, 0x3213, },
+ { 0x09, 0x0025, },
+ { 0x1c, 0x001d, },
+ { 0x1f, 0x002d, },
+ { 0x20, 0x001d, },
+ { 0x22, 0x0022, },
+ { 0x23, 0x0020, },
+ { 0x29, 0x110f, },
+ { 0x2a, 0x10b4, },
+ { 0x2b, 0x10ae, },
+ { 0x2c, 0x0031, },
+ { 0x31, 0x010d, },
+ { 0x32, 0x0100, },
+ { 0x44, 0x0510, },
+ { 0x54, 0x0104, },
+ { 0x58, 0x2222, },
+ { 0x59, 0x1162, },
+ { 0x5a, 0x3211, },
+ { 0x5d, 0x0370, },
+ { 0x5e, 0x0296, },
+ { 0x61, 0x0010, },
+ { 0x63, 0x4a00, },
+ { 0x65, 0x0800, },
+ { 0x71, 0x0003, },
+ { 0x72, 0x0470, },
+ { 0x81, 0x0002, },
+ { 0x82, 0x0600, },
+ { 0x86, 0x0002, },
+ { 0x8a, 0x2c38, },
+ { 0x8b, 0x2a37, },
+ { 0x92, 0x302f, },
+ { 0x93, 0x3332, },
+ { 0x96, 0x000c, },
+ { 0x99, 0x0101, },
+ { 0x9c, 0x2e37, },
+ { 0x9d, 0x2c37, },
+ { 0x9e, 0x2c37, },
+ { 0xab, 0x0100, },
+ { 0xac, 0x1003, },
+ { 0xad, 0x103f, },
+ { 0xe2, 0x0100, },
+ { 0x28, 0x1010, },
+ { 0xb1, 0x000e, },
+};
+
+/* VSB SNR lookup table */
+static struct vsb_snr_tab {
+ u16 val;
+ u16 data;
+} vsb_snr_tab[] = {
+ { 1023, 770, },
+ { 923, 300, },
+ { 918, 295, },
+ { 915, 290, },
+ { 911, 285, },
+ { 906, 280, },
+ { 901, 275, },
+ { 896, 270, },
+ { 891, 265, },
+ { 885, 260, },
+ { 879, 255, },
+ { 873, 250, },
+ { 864, 245, },
+ { 858, 240, },
+ { 850, 235, },
+ { 841, 230, },
+ { 832, 225, },
+ { 823, 220, },
+ { 812, 215, },
+ { 802, 210, },
+ { 788, 205, },
+ { 778, 200, },
+ { 767, 195, },
+ { 753, 190, },
+ { 740, 185, },
+ { 725, 180, },
+ { 707, 175, },
+ { 689, 170, },
+ { 671, 165, },
+ { 656, 160, },
+ { 637, 155, },
+ { 616, 150, },
+ { 542, 145, },
+ { 519, 140, },
+ { 507, 135, },
+ { 497, 130, },
+ { 492, 125, },
+ { 474, 120, },
+ { 300, 111, },
+ { 0, 0, },
+};
+
+/* QAM64 SNR lookup table */
+static struct qam64_snr_tab {
+ u16 val;
+ u16 data;
+} qam64_snr_tab[] = {
+ { 12, 300, },
+ { 15, 290, },
+ { 18, 280, },
+ { 22, 270, },
+ { 23, 268, },
+ { 24, 266, },
+ { 25, 264, },
+ { 27, 262, },
+ { 28, 260, },
+ { 29, 258, },
+ { 30, 256, },
+ { 32, 254, },
+ { 33, 252, },
+ { 34, 250, },
+ { 35, 249, },
+ { 36, 248, },
+ { 37, 247, },
+ { 38, 246, },
+ { 39, 245, },
+ { 40, 244, },
+ { 41, 243, },
+ { 42, 241, },
+ { 43, 240, },
+ { 44, 239, },
+ { 45, 238, },
+ { 46, 237, },
+ { 47, 236, },
+ { 48, 235, },
+ { 49, 234, },
+ { 50, 233, },
+ { 51, 232, },
+ { 52, 231, },
+ { 53, 230, },
+ { 55, 229, },
+ { 56, 228, },
+ { 57, 227, },
+ { 58, 226, },
+ { 59, 225, },
+ { 60, 224, },
+ { 62, 223, },
+ { 63, 222, },
+ { 65, 221, },
+ { 66, 220, },
+ { 68, 219, },
+ { 69, 218, },
+ { 70, 217, },
+ { 72, 216, },
+ { 73, 215, },
+ { 75, 214, },
+ { 76, 213, },
+ { 78, 212, },
+ { 80, 211, },
+ { 81, 210, },
+ { 83, 209, },
+ { 84, 208, },
+ { 85, 207, },
+ { 87, 206, },
+ { 89, 205, },
+ { 91, 204, },
+ { 93, 203, },
+ { 95, 202, },
+ { 96, 201, },
+ { 104, 200, },
+};
+
+/* QAM256 SNR lookup table */
+static struct qam256_snr_tab {
+ u16 val;
+ u16 data;
+} qam256_snr_tab[] = {
+ { 12, 400, },
+ { 13, 390, },
+ { 15, 380, },
+ { 17, 360, },
+ { 19, 350, },
+ { 22, 348, },
+ { 23, 346, },
+ { 24, 344, },
+ { 25, 342, },
+ { 26, 340, },
+ { 27, 336, },
+ { 28, 334, },
+ { 29, 332, },
+ { 30, 330, },
+ { 31, 328, },
+ { 32, 326, },
+ { 33, 325, },
+ { 34, 322, },
+ { 35, 320, },
+ { 37, 318, },
+ { 39, 316, },
+ { 40, 314, },
+ { 41, 312, },
+ { 42, 310, },
+ { 43, 308, },
+ { 46, 306, },
+ { 47, 304, },
+ { 49, 302, },
+ { 51, 300, },
+ { 53, 298, },
+ { 54, 297, },
+ { 55, 296, },
+ { 56, 295, },
+ { 57, 294, },
+ { 59, 293, },
+ { 60, 292, },
+ { 61, 291, },
+ { 63, 290, },
+ { 64, 289, },
+ { 65, 288, },
+ { 66, 287, },
+ { 68, 286, },
+ { 69, 285, },
+ { 71, 284, },
+ { 72, 283, },
+ { 74, 282, },
+ { 75, 281, },
+ { 76, 280, },
+ { 77, 279, },
+ { 78, 278, },
+ { 81, 277, },
+ { 83, 276, },
+ { 84, 275, },
+ { 86, 274, },
+ { 87, 273, },
+ { 89, 272, },
+ { 90, 271, },
+ { 92, 270, },
+ { 93, 269, },
+ { 95, 268, },
+ { 96, 267, },
+ { 98, 266, },
+ { 100, 265, },
+ { 102, 264, },
+ { 104, 263, },
+ { 105, 262, },
+ { 106, 261, },
+ { 110, 260, },
+};
+
+/* 8 bit registers, 16 bit values */
+static int s5h1409_writereg(struct s5h1409_state* state, u8 reg, u16 data)
+{
+ int ret;
+ u8 buf [] = { reg, data >> 8, data & 0xff };
+
+ struct i2c_msg msg = { .addr = state->config->demod_address,
+ .flags = 0, .buf = buf, .len = 3 };
+
+ ret = i2c_transfer(state->i2c, &msg, 1);
+
+ if (ret != 1)
+ printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, "
+ "ret == %i)\n", __FUNCTION__, reg, data, ret);
+
+ return (ret != 1) ? -1 : 0;
+}
+
+static u16 s5h1409_readreg(struct s5h1409_state* state, u8 reg)
+{
+ int ret;
+ u8 b0 [] = { reg };
+ u8 b1 [] = { 0, 0 };
+
+ struct i2c_msg msg [] = {
+ { .addr = state->config->demod_address, .flags = 0,
+ .buf = b0, .len = 1 },
+ { .addr = state->config->demod_address, .flags = I2C_M_RD,
+ .buf = b1, .len = 2 } };
+
+ ret = i2c_transfer(state->i2c, msg, 2);
+
+ if (ret != 2)
+ printk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);
+ return (b1[0] << 8) | b1[1];
+}
+
+static int s5h1409_softreset(struct dvb_frontend* fe)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ s5h1409_writereg(state, 0xf5, 0);
+ s5h1409_writereg(state, 0xf5, 1);
+ return 0;
+}
+
+static int s5h1409_set_if_freq(struct dvb_frontend* fe, int KHz)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+ int ret = 0;
+
+ dprintk("%s(%d KHz)\n", __FUNCTION__, KHz);
+
+ if( (KHz == 44000) || (KHz == 5380) ) {
+ s5h1409_writereg(state, 0x87, 0x01be);
+ s5h1409_writereg(state, 0x88, 0x0436);
+ s5h1409_writereg(state, 0x89, 0x054d);
+ } else {
+ printk("%s() Invalid arg = %d KHz\n", __FUNCTION__, KHz);
+ ret = -1;
+ }
+
+ return ret;
+}
+
+static int s5h1409_set_spectralinversion(struct dvb_frontend* fe, int inverted)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if(inverted == 1)
+ return s5h1409_writereg(state, 0x1b, 0x1101); /* Inverted */
+ else
+ return s5h1409_writereg(state, 0x1b, 0x0110); /* Normal */
+}
+
+static int s5h1409_enable_modulation(struct dvb_frontend* fe,
+ fe_modulation_t m)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+
+ dprintk("%s(0x%08x)\n", __FUNCTION__, m);
+
+ switch(m) {
+ case VSB_8:
+ dprintk("%s() VSB_8\n", __FUNCTION__);
+ s5h1409_writereg(state, 0xf4, 0);
+ break;
+ case QAM_64:
+ dprintk("%s() QAM_64\n", __FUNCTION__);
+ s5h1409_writereg(state, 0xf4, 1);
+ s5h1409_writereg(state, 0x85, 0x100);
+ break;
+ case QAM_256:
+ dprintk("%s() QAM_256\n", __FUNCTION__);
+ s5h1409_writereg(state, 0xf4, 1);
+ s5h1409_writereg(state, 0x85, 0x101);
+ break;
+ default:
+ dprintk("%s() Invalid modulation\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ state->current_modulation = m;
+ s5h1409_softreset(fe);
+
+ return 0;
+}
+
+static int s5h1409_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+
+ dprintk("%s(%d)\n", __FUNCTION__, enable);
+
+ if (enable)
+ return s5h1409_writereg(state, 0xf3, 1);
+ else
+ return s5h1409_writereg(state, 0xf3, 0);
+}
+
+static int s5h1409_set_gpio(struct dvb_frontend* fe, int enable)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+
+ dprintk("%s(%d)\n", __FUNCTION__, enable);
+
+ if (enable)
+ return s5h1409_writereg(state, 0xe3, 0x1100);
+ else
+ return s5h1409_writereg(state, 0xe3, 0);
+}
+
+static int s5h1409_sleep(struct dvb_frontend* fe, int enable)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+
+ dprintk("%s(%d)\n", __FUNCTION__, enable);
+
+ return s5h1409_writereg(state, 0xf2, enable);
+}
+
+static int s5h1409_register_reset(struct dvb_frontend* fe)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ return s5h1409_writereg(state, 0xfa, 0);
+}
+
+/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
+static int s5h1409_set_frontend (struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+
+ dprintk("%s(frequency=%d)\n", __FUNCTION__, p->frequency);
+
+ s5h1409_softreset(fe);
+
+ state->current_frequency = p->frequency;
+
+ s5h1409_enable_modulation(fe, p->u.vsb.modulation);
+
+ if (fe->ops.tuner_ops.set_params) {
+ if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1);
+ fe->ops.tuner_ops.set_params(fe, p);
+ if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+
+ return 0;
+}
+
+/* Reset the demod hardware and reset all of the configuration registers
+ to a default state. */
+static int s5h1409_init (struct dvb_frontend* fe)
+{
+ int i;
+
+ struct s5h1409_state* state = fe->demodulator_priv;
+ dprintk("%s()\n", __FUNCTION__);
+
+ s5h1409_sleep(fe, 0);
+ s5h1409_register_reset(fe);
+
+ for (i=0; i < ARRAY_SIZE(init_tab); i++)
+ s5h1409_writereg(state, init_tab[i].reg, init_tab[i].data);
+
+ /* The datasheet says that after initialisation, VSB is default */
+ state->current_modulation = VSB_8;
+
+ if (state->config->output_mode == S5H1409_SERIAL_OUTPUT)
+ s5h1409_writereg(state, 0xab, 0x100); /* Serial */
+ else
+ s5h1409_writereg(state, 0xab, 0x0); /* Parallel */
+
+ s5h1409_set_spectralinversion(fe, state->config->inversion);
+ s5h1409_set_if_freq(fe, state->config->if_freq);
+ s5h1409_set_gpio(fe, state->config->gpio);
+ s5h1409_softreset(fe);
+
+ /* Note: Leaving the I2C gate open here. */
+ s5h1409_i2c_gate_ctrl(fe, 1);
+
+ return 0;
+}
+
+static int s5h1409_read_status(struct dvb_frontend* fe, fe_status_t* status)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+ u16 reg;
+ u32 tuner_status = 0;
+
+ *status = 0;
+
+ /* Get the demodulator status */
+ reg = s5h1409_readreg(state, 0xf1);
+ if(reg & 0x1000)
+ *status |= FE_HAS_VITERBI;
+ if(reg & 0x8000)
+ *status |= FE_HAS_LOCK | FE_HAS_SYNC;
+
+ switch(state->config->status_mode) {
+ case S5H1409_DEMODLOCKING:
+ if (*status & FE_HAS_VITERBI)
+ *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
+ break;
+ case S5H1409_TUNERLOCKING:
+ /* Get the tuner status */
+ if (fe->ops.tuner_ops.get_status) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ fe->ops.tuner_ops.get_status(fe, &tuner_status);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+ if (tuner_status)
+ *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
+ break;
+ }
+
+ dprintk("%s() status 0x%08x\n", __FUNCTION__, *status);
+
+ return 0;
+}
+
+static int s5h1409_qam256_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v)
+{
+ int i, ret = -EINVAL;
+ dprintk("%s()\n", __FUNCTION__);
+
+ for (i=0; i < ARRAY_SIZE(qam256_snr_tab); i++) {
+ if (v < qam256_snr_tab[i].val) {
+ *snr = qam256_snr_tab[i].data;
+ ret = 0;
+ break;
+ }
+ }
+ return ret;
+}
+
+static int s5h1409_qam64_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v)
+{
+ int i, ret = -EINVAL;
+ dprintk("%s()\n", __FUNCTION__);
+
+ for (i=0; i < ARRAY_SIZE(qam64_snr_tab); i++) {
+ if (v < qam64_snr_tab[i].val) {
+ *snr = qam64_snr_tab[i].data;
+ ret = 0;
+ break;
+ }
+ }
+ return ret;
+}
+
+static int s5h1409_vsb_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v)
+{
+ int i, ret = -EINVAL;
+ dprintk("%s()\n", __FUNCTION__);
+
+ for (i=0; i < ARRAY_SIZE(vsb_snr_tab); i++) {
+ if (v > vsb_snr_tab[i].val) {
+ *snr = vsb_snr_tab[i].data;
+ ret = 0;
+ break;
+ }
+ }
+ dprintk("%s() snr=%d\n", __FUNCTION__, *snr);
+ return ret;
+}
+
+static int s5h1409_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+ u16 reg;
+ dprintk("%s()\n", __FUNCTION__);
+
+ reg = s5h1409_readreg(state, 0xf1) & 0x1ff;
+
+ switch(state->current_modulation) {
+ case QAM_64:
+ return s5h1409_qam64_lookup_snr(fe, snr, reg);
+ case QAM_256:
+ return s5h1409_qam256_lookup_snr(fe, snr, reg);
+ case VSB_8:
+ return s5h1409_vsb_lookup_snr(fe, snr, reg);
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static int s5h1409_read_signal_strength(struct dvb_frontend* fe,
+ u16* signal_strength)
+{
+ return s5h1409_read_snr(fe, signal_strength);
+}
+
+static int s5h1409_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+
+ *ucblocks = s5h1409_readreg(state, 0xb5);
+
+ return 0;
+}
+
+static int s5h1409_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+ return s5h1409_read_ucblocks(fe, ber);
+}
+
+static int s5h1409_get_frontend(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+
+ p->frequency = state->current_frequency;
+ p->u.vsb.modulation = state->current_modulation;
+
+ return 0;
+}
+
+static int s5h1409_get_tune_settings(struct dvb_frontend* fe,
+ struct dvb_frontend_tune_settings *tune)
+{
+ tune->min_delay_ms = 1000;
+ return 0;
+}
+
+static void s5h1409_release(struct dvb_frontend* fe)
+{
+ struct s5h1409_state* state = fe->demodulator_priv;
+ kfree(state);
+}
+
+static struct dvb_frontend_ops s5h1409_ops;
+
+struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct s5h1409_state* state = NULL;
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct s5h1409_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ state->current_modulation = 0;
+
+ /* check if the demod exists */
+ if (s5h1409_readreg(state, 0x04) != 0x0066)
+ goto error;
+
+ /* create dvb_frontend */
+ memcpy(&state->frontend.ops, &s5h1409_ops,
+ sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+
+ /* Note: Leaving the I2C gate open here. */
+ s5h1409_writereg(state, 0xf3, 1);
+
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+
+static struct dvb_frontend_ops s5h1409_ops = {
+
+ .info = {
+ .name = "Samsung S5H1409 QAM/8VSB Frontend",
+ .type = FE_ATSC,
+ .frequency_min = 54000000,
+ .frequency_max = 858000000,
+ .frequency_stepsize = 62500,
+ .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
+ },
+
+ .init = s5h1409_init,
+ .i2c_gate_ctrl = s5h1409_i2c_gate_ctrl,
+ .set_frontend = s5h1409_set_frontend,
+ .get_frontend = s5h1409_get_frontend,
+ .get_tune_settings = s5h1409_get_tune_settings,
+ .read_status = s5h1409_read_status,
+ .read_ber = s5h1409_read_ber,
+ .read_signal_strength = s5h1409_read_signal_strength,
+ .read_snr = s5h1409_read_snr,
+ .read_ucblocks = s5h1409_read_ucblocks,
+ .release = s5h1409_release,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Enable verbose debug messages");
+
+MODULE_DESCRIPTION("Samsung S5H1409 QAM-B/ATSC Demodulator driver");
+MODULE_AUTHOR("Steven Toth");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(s5h1409_attach);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ */
diff --git a/drivers/media/dvb/frontends/s5h1409.h b/drivers/media/dvb/frontends/s5h1409.h
new file mode 100644
index 00000000000..20f9af1af44
--- /dev/null
+++ b/drivers/media/dvb/frontends/s5h1409.h
@@ -0,0 +1,73 @@
+/*
+ Samsung S5H1409 VSB/QAM demodulator driver
+
+ Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#ifndef __S5H1409_H__
+#define __S5H1409_H__
+
+#include <linux/dvb/frontend.h>
+
+struct s5h1409_config
+{
+ /* the demodulator's i2c address */
+ u8 demod_address;
+
+ /* serial/parallel output */
+#define S5H1409_PARALLEL_OUTPUT 0
+#define S5H1409_SERIAL_OUTPUT 1
+ u8 output_mode;
+
+ /* GPIO Setting */
+#define S5H1409_GPIO_OFF 0
+#define S5H1409_GPIO_ON 1
+ u8 gpio;
+
+ /* IF Freq in KHz */
+ u16 if_freq;
+
+ /* Spectral Inversion */
+#define S5H1409_INVERSION_OFF 0
+#define S5H1409_INVERSION_ON 1
+ u8 inversion;
+
+ /* Return lock status based on tuner lock, or demod lock */
+#define S5H1409_TUNERLOCKING 0
+#define S5H1409_DEMODLOCKING 1
+ u8 status_mode;
+};
+
+#if defined(CONFIG_DVB_S5H1409) || (defined(CONFIG_DVB_S5H1409_MODULE) && defined(MODULE))
+extern struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config,
+ struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif /* CONFIG_DVB_S5H1409 */
+
+#endif /* __S5H1409_H__ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ */
diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c
index d98fd5c2e13..da876f7bfe3 100644
--- a/drivers/media/dvb/frontends/sp8870.c
+++ b/drivers/media/dvb/frontends/sp8870.c
@@ -29,7 +29,6 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/delay.h>
diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
index 5c2f8f4e0ae..1aa2539f509 100644
--- a/drivers/media/dvb/frontends/sp887x.c
+++ b/drivers/media/dvb/frontends/sp887x.c
@@ -12,7 +12,6 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/string.h>
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 9a343972ff5..17e5cb561cd 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -680,8 +680,8 @@ static struct dvb_frontend_ops stv0297_ops = {
.info = {
.name = "ST STV0297 DVB-C",
.type = FE_QAM,
- .frequency_min = 64000000,
- .frequency_max = 1300000000,
+ .frequency_min = 47000000,
+ .frequency_max = 862000000,
.frequency_stepsize = 62500,
.symbol_rate_min = 870000,
.symbol_rate_max = 11700000,
diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
index 6c607302c1b..035dd7ba651 100644
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -45,7 +45,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index e725f612a6b..4cd9e82c466 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -439,8 +439,8 @@ static struct dvb_frontend_ops tda10021_ops = {
.name = "Philips TDA10021 DVB-C",
.type = FE_QAM,
.frequency_stepsize = 62500,
- .frequency_min = 51000000,
- .frequency_max = 858000000,
+ .frequency_min = 47000000,
+ .frequency_max = 862000000,
.symbol_rate_min = (XIN/2)/64, /* SACLK/64 == (XIN/2)/64 */
.symbol_rate_max = (XIN/2)/4, /* SACLK/4 */
#if 0
diff --git a/drivers/media/dvb/frontends/tda10023.c b/drivers/media/dvb/frontends/tda10023.c
index 4bb06f97938..364bc01971a 100644
--- a/drivers/media/dvb/frontends/tda10023.c
+++ b/drivers/media/dvb/frontends/tda10023.c
@@ -215,12 +215,6 @@ static int tda10023_set_symbolrate (struct tda10023_state* state, u32 sr)
s16 SFIL=0;
u16 NDEC = 0;
- if (sr > (SYSCLK/(2*4)))
- sr=SYSCLK/(2*4);
-
- if (sr<870000)
- sr=870000;
-
if (sr < (u32)(SYSCLK/98.40)) {
NDEC=3;
SFIL=1;
@@ -506,8 +500,8 @@ static struct dvb_frontend_ops tda10023_ops = {
.name = "Philips TDA10023 DVB-C",
.type = FE_QAM,
.frequency_stepsize = 62500,
- .frequency_min = 51000000,
- .frequency_max = 858000000,
+ .frequency_min = 47000000,
+ .frequency_max = 862000000,
.symbol_rate_min = (SYSCLK/2)/64, /* SACLK/64 == (SYSCLK/2)/64 */
.symbol_rate_max = (SYSCLK/2)/4, /* SACLK/4 */
.caps = 0x400 | //FE_CAN_QAM_4
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 33a84372c9e..8415a8a5247 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -31,7 +31,6 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/string.h>
diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c
index 0f2d4b41556..9a8ddc537f8 100644
--- a/drivers/media/dvb/frontends/tda10086.c
+++ b/drivers/media/dvb/frontends/tda10086.c
@@ -22,7 +22,6 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/string.h>
diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c
index 67415c9db6f..011b74f798a 100644
--- a/drivers/media/dvb/frontends/tda8083.c
+++ b/drivers/media/dvb/frontends/tda8083.c
@@ -27,7 +27,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
@@ -443,12 +442,12 @@ static struct dvb_frontend_ops tda8083_ops = {
.info = {
.name = "Philips TDA8083 DVB-S",
.type = FE_QPSK,
- .frequency_min = 950000, /* FIXME: guessed! */
- .frequency_max = 1400000, /* FIXME: guessed! */
+ .frequency_min = 920000, /* TDA8060 */
+ .frequency_max = 2200000, /* TDA8060 */
.frequency_stepsize = 125, /* kHz for QPSK frontends */
/* .frequency_tolerance = ???,*/
- .symbol_rate_min = 1000000, /* FIXME: guessed! */
- .symbol_rate_max = 45000000, /* FIXME: guessed! */
+ .symbol_rate_min = 12000000,
+ .symbol_rate_max = 30000000,
/* .symbol_rate_tolerance = ???,*/
.caps = FE_CAN_INVERSION_AUTO |
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
diff --git a/drivers/media/dvb/frontends/ves1820.c b/drivers/media/dvb/frontends/ves1820.c
index 9b57576bfeb..066b73b7569 100644
--- a/drivers/media/dvb/frontends/ves1820.c
+++ b/drivers/media/dvb/frontends/ves1820.c
@@ -410,8 +410,8 @@ static struct dvb_frontend_ops ves1820_ops = {
.name = "VLSI VES1820 DVB-C",
.type = FE_QAM,
.frequency_stepsize = 62500,
- .frequency_min = 51000000,
- .frequency_max = 858000000,
+ .frequency_min = 47000000,
+ .frequency_max = 862000000,
.caps = FE_CAN_QAM_16 |
FE_CAN_QAM_32 |
FE_CAN_QAM_64 |
diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c
index 245f9b7dddf..a97a7fd2c89 100644
--- a/drivers/media/dvb/frontends/zl10353.c
+++ b/drivers/media/dvb/frontends/zl10353.c
@@ -21,7 +21,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 8178832d14a..8b8144f77a7 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -40,7 +40,6 @@
#include <linux/smp_lock.h>
#include <linux/kernel.h>
-#include <linux/moduleparam.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/fcntl.h>
@@ -1543,7 +1542,7 @@ static int get_firmware(struct av7110* av7110)
}
/* check if the firmware is available */
- av7110->bin_fw = (unsigned char *) vmalloc(fw->size);
+ av7110->bin_fw = vmalloc(fw->size);
if (NULL == av7110->bin_fw) {
dprintk(1, "out of memory\n");
release_firmware(fw);
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index 515e8232e02..a468aa2e485 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -978,24 +978,24 @@ static int OSDSetColor(struct av7110 *av7110, u8 color, u8 r, u8 g, u8 b, u8 ble
static int OSDSetPalette(struct av7110 *av7110, u32 __user * colors, u8 first, u8 last)
{
- int i;
- int length = last - first + 1;
+ int i;
+ int length = last - first + 1;
- if (length * 4 > DATA_BUFF3_SIZE)
- return -EINVAL;
+ if (length * 4 > DATA_BUFF3_SIZE)
+ return -EINVAL;
- for (i = 0; i < length; i++) {
- u32 color, blend, yuv;
+ for (i = 0; i < length; i++) {
+ u32 color, blend, yuv;
- if (get_user(color, colors + i))
- return -EFAULT;
- blend = (color & 0xF0000000) >> 4;
- yuv = blend ? RGB2YUV(color & 0xFF, (color >> 8) & 0xFF,
+ if (get_user(color, colors + i))
+ return -EFAULT;
+ blend = (color & 0xF0000000) >> 4;
+ yuv = blend ? RGB2YUV(color & 0xFF, (color >> 8) & 0xFF,
(color >> 16) & 0xFF) | blend : 0;
- yuv = ((yuv & 0xFFFF0000) >> 16) | ((yuv & 0x0000FFFF) << 16);
- wdebi(av7110, DEBINOSWAP, DATA_BUFF3_BASE + i * 4, yuv, 4);
- }
- return av7110_fw_cmd(av7110, COMTYPE_OSD, Set_Palette, 4,
+ yuv = ((yuv & 0xFFFF0000) >> 16) | ((yuv & 0x0000FFFF) << 16);
+ wdebi(av7110, DEBINOSWAP, DATA_BUFF3_BASE + i * 4, yuv, 4);
+ }
+ return av7110_fw_cmd(av7110, COMTYPE_OSD, Set_Palette, 4,
av7110->osdwin,
bpp2pal[av7110->osdbpp[av7110->osdwin]],
first, last);
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index 6322800ee12..5d19c402dad 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -25,7 +25,6 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/proc_fs.h>
#include <linux/kernel.h>
#include <asm/bitops.h>
@@ -280,7 +279,7 @@ static int av7110_ir_write_proc(struct file *file, const char __user *buffer,
if (count < size)
return -EINVAL;
- page = (char *) vmalloc(size);
+ page = vmalloc(size);
if (!page)
return -ENOMEM;
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index 87afaebc070..76cca003252 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -129,23 +129,25 @@ static struct v4l2_input inputs[4] = {
static int ves1820_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
{
+ struct av7110 *av7110 = dev->ext_priv;
u8 buf[] = { 0x00, reg, data };
struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 3 };
dprintk(4, "dev: %p\n", dev);
- if (1 != saa7146_i2c_transfer(dev, &msg, 1, 1))
+ if (1 != i2c_transfer(&av7110->i2c_adap, &msg, 1))
return -1;
return 0;
}
static int tuner_write(struct saa7146_dev *dev, u8 addr, u8 data [4])
{
+ struct av7110 *av7110 = dev->ext_priv;
struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = data, .len = 4 };
dprintk(4, "dev: %p\n", dev);
- if (1 != saa7146_i2c_transfer(dev, &msg, 1, 1))
+ if (1 != i2c_transfer(&av7110->i2c_adap, &msg, 1))
return -1;
return 0;
}
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 0aee7a13a07..3439c9864f6 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -1232,7 +1232,7 @@ static struct saa7146_ext_vv vv_data = {
.capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
.flags = 0,
.stds = &standard[0],
- .num_stds = sizeof(standard) / sizeof(struct saa7146_standard),
+ .num_stds = ARRAY_SIZE(standard),
.ioctls = &ioctls[0],
.ioctl = av_ioctl,
};
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 873c3ba296f..509349211d4 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -214,7 +214,6 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
case 0x100f:
case 0x1011:
case 0x1012:
- case 0x1017:
/* The hauppauge keymap is a superset of these remotes */
ir_input_init(input_dev, &budget_ci->ir.state,
IR_TYPE_RC5, ir_codes_hauppauge_new);
@@ -225,6 +224,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
budget_ci->ir.rc5_device = rc5_device;
break;
case 0x1010:
+ case 0x1017:
/* for the Technotrend 1500 bundled remote */
ir_input_init(input_dev, &budget_ci->ir.state,
IR_TYPE_RC5, ir_codes_tt_1500);
diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
index b611f2b1f8b..0252081f013 100644
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@@ -34,7 +34,6 @@
* the project's page is at http://www.linuxtv.org/dvb/
*/
-#include <linux/moduleparam.h>
#include "budget.h"
#include "ttpci-eeprom.h"
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index b60cdc93d6d..288e79f2cb0 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -13,7 +13,6 @@
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/usb.h>
#include <linux/delay.h>
#include <linux/time.h>
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 78c98b08997..5e691fd7990 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -22,7 +22,6 @@
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index f8bf9fe37d3..11e962f1a97 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -111,11 +111,16 @@ config RADIO_AZTECH_PORT
jumper sets the card to 0x358.
config RADIO_GEMTEK
- tristate "GemTek Radio Card support"
+ tristate "GemTek Radio card (or compatible) support"
depends on ISA && VIDEO_V4L2
---help---
Choose Y here if you have this FM radio card, and then fill in the
- port address below.
+ I/O port address and settings below. The following cards either have
+ GemTek Radio tuner or are rebranded GemTek Radio cards:
+
+ - Sound Vision 16 Gold with FM Radio
+ - Typhoon Radio card (some models)
+ - Hama Radio card
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
@@ -126,14 +131,25 @@ config RADIO_GEMTEK
module will be called radio-gemtek.
config RADIO_GEMTEK_PORT
- hex "GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)"
+ hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
depends on RADIO_GEMTEK=y
default "34c"
help
Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
0x34c, if you haven't changed the jumper setting on the card. On
Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
- port is 0x28c.
+ port is 0x20c, 0x248 or 0x28c.
+ If automatic I/O port probing is enabled this port will be used only
+ in case of automatic probing failure, ie. as a fallback.
+
+config RADIO_GEMTEK_PROBE
+ bool "Automatic I/O port probing"
+ depends on RADIO_GEMTEK=y
+ default y
+ help
+ Say Y here to enable automatic probing for GemTek Radio card. The
+ following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
+ 0x28c.
config RADIO_GEMTEK_PCI
tristate "GemTek PCI Radio Card support"
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index eab8c80a2e4..0c963db0361 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -26,143 +26,383 @@
#include <media/v4l2-common.h>
#include <linux/spinlock.h>
-#include <linux/version.h> /* for KERNEL_VERSION MACRO */
-#define RADIO_VERSION KERNEL_VERSION(0,0,2)
+#include <linux/version.h> /* for KERNEL_VERSION MACRO */
+#define RADIO_VERSION KERNEL_VERSION(0,0,3)
+#define RADIO_BANNER "GemTek Radio card driver: v0.0.3"
-static struct v4l2_queryctrl radio_qctrl[] = {
- {
- .id = V4L2_CID_AUDIO_MUTE,
- .name = "Mute",
- .minimum = 0,
- .maximum = 1,
- .default_value = 1,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- },{
- .id = V4L2_CID_AUDIO_VOLUME,
- .name = "Volume",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535,
- .default_value = 0xff,
- .type = V4L2_CTRL_TYPE_INTEGER,
- }
-};
+/*
+ * Module info.
+ */
+
+MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>");
+MODULE_DESCRIPTION("A driver for the GemTek Radio card.");
+MODULE_LICENSE("GPL");
+
+/*
+ * Module params.
+ */
#ifndef CONFIG_RADIO_GEMTEK_PORT
#define CONFIG_RADIO_GEMTEK_PORT -1
#endif
+#ifndef CONFIG_RADIO_GEMTEK_PROBE
+#define CONFIG_RADIO_GEMTEK_PROBE 1
+#endif
-static int io = CONFIG_RADIO_GEMTEK_PORT;
-static int radio_nr = -1;
-static spinlock_t lock;
+static int io = CONFIG_RADIO_GEMTEK_PORT;
+static int probe = CONFIG_RADIO_GEMTEK_PROBE;
+static int hardmute;
+static int shutdown = 1;
+static int keepmuted = 1;
+static int initmute = 1;
+static int radio_nr = -1;
-struct gemtek_device
-{
- int port;
- unsigned long curfreq;
+module_param(io, int, 0444);
+MODULE_PARM_DESC(io, "Force I/O port for the GemTek Radio card if automatic"
+ "probing is disabled or fails. The most common I/O ports are: 0x20c "
+ "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to "
+ " work for the combined sound/radiocard).");
+
+module_param(probe, bool, 0444);
+MODULE_PARM_DESC(probe, "Enable automatic device probing. Note: only the most "
+ "common I/O ports used by the card are probed.");
+
+module_param(hardmute, bool, 0644);
+MODULE_PARM_DESC(hardmute, "Enable `hard muting' by shutting down PLL, may "
+ "reduce static noise.");
+
+module_param(shutdown, bool, 0644);
+MODULE_PARM_DESC(shutdown, "Enable shutting down PLL and muting line when "
+ "module is unloaded.");
+
+module_param(keepmuted, bool, 0644);
+MODULE_PARM_DESC(keepmuted, "Keep card muted even when frequency is changed.");
+
+module_param(initmute, bool, 0444);
+MODULE_PARM_DESC(initmute, "Mute card when module is loaded.");
+
+module_param(radio_nr, int, 0444);
+
+/*
+ * Functions for controlling the card.
+ */
+#define GEMTEK_LOWFREQ (87*16000)
+#define GEMTEK_HIGHFREQ (108*16000)
+
+/*
+ * Frequency calculation constants. Intermediate frequency 10.52 MHz (nominal
+ * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz).
+ */
+#define FSCALE 8
+#define IF_OFFSET ((unsigned int)(10.52 * 16000 * (1<<FSCALE)))
+#define REF_FREQ ((unsigned int)(6.39 * 16 * (1<<FSCALE)))
+
+#define GEMTEK_CK 0x01 /* Clock signal */
+#define GEMTEK_DA 0x02 /* Serial data */
+#define GEMTEK_CE 0x04 /* Chip enable */
+#define GEMTEK_NS 0x08 /* No signal */
+#define GEMTEK_MT 0x10 /* Line mute */
+#define GEMTEK_STDF_3_125_KHZ 0x01 /* Standard frequency 3.125 kHz */
+#define GEMTEK_PLL_OFF 0x07 /* PLL off */
+
+#define BU2614_BUS_SIZE 32 /* BU2614 / BU2614FS bus size */
+
+#define SHORT_DELAY 5 /* usec */
+#define LONG_DELAY 75 /* usec */
+
+struct gemtek_device {
+ unsigned long lastfreq;
int muted;
+ u32 bu2614data;
};
+#define BU2614_FREQ_BITS 16 /* D0..D15, Frequency data */
+#define BU2614_PORT_BITS 3 /* P0..P2, Output port control data */
+#define BU2614_VOID_BITS 4 /* unused */
+#define BU2614_FMES_BITS 1 /* CT, Frequency measurement beginning data */
+#define BU2614_STDF_BITS 3 /* R0..R2, Standard frequency data */
+#define BU2614_SWIN_BITS 1 /* S, Switch between FMIN / AMIN */
+#define BU2614_SWAL_BITS 1 /* PS, Swallow counter division (AMIN only)*/
+#define BU2614_VOID2_BITS 1 /* unused */
+#define BU2614_FMUN_BITS 1 /* GT, Frequency measurement time & unlock */
+#define BU2614_TEST_BITS 1 /* TS, Test data is input */
+
+#define BU2614_FREQ_SHIFT 0
+#define BU2614_PORT_SHIFT (BU2614_FREQ_BITS + BU2614_FREQ_SHIFT)
+#define BU2614_VOID_SHIFT (BU2614_PORT_BITS + BU2614_PORT_SHIFT)
+#define BU2614_FMES_SHIFT (BU2614_VOID_BITS + BU2614_VOID_SHIFT)
+#define BU2614_STDF_SHIFT (BU2614_FMES_BITS + BU2614_FMES_SHIFT)
+#define BU2614_SWIN_SHIFT (BU2614_STDF_BITS + BU2614_STDF_SHIFT)
+#define BU2614_SWAL_SHIFT (BU2614_SWIN_BITS + BU2614_SWIN_SHIFT)
+#define BU2614_VOID2_SHIFT (BU2614_SWAL_BITS + BU2614_SWAL_SHIFT)
+#define BU2614_FMUN_SHIFT (BU2614_VOID2_BITS + BU2614_VOID2_SHIFT)
+#define BU2614_TEST_SHIFT (BU2614_FMUN_BITS + BU2614_FMUN_SHIFT)
+
+#define MKMASK(field) (((1<<BU2614_##field##_BITS) - 1) << \
+ BU2614_##field##_SHIFT)
+#define BU2614_PORT_MASK MKMASK(PORT)
+#define BU2614_FREQ_MASK MKMASK(FREQ)
+#define BU2614_VOID_MASK MKMASK(VOID)
+#define BU2614_FMES_MASK MKMASK(FMES)
+#define BU2614_STDF_MASK MKMASK(STDF)
+#define BU2614_SWIN_MASK MKMASK(SWIN)
+#define BU2614_SWAL_MASK MKMASK(SWAL)
+#define BU2614_VOID2_MASK MKMASK(VOID2)
+#define BU2614_FMUN_MASK MKMASK(FMUN)
+#define BU2614_TEST_MASK MKMASK(TEST)
-/* local things */
+static struct gemtek_device gemtek_unit;
-/* the correct way to mute the gemtek may be to write the last written
- * frequency || 0x10, but just writing 0x10 once seems to do it as well
+static spinlock_t lock;
+
+/*
+ * Set data which will be sent to BU2614FS.
*/
-static void gemtek_mute(struct gemtek_device *dev)
+#define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \
+ ((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT))
+
+/*
+ * Transmit settings to BU2614FS over GemTek IC.
+ */
+static void gemtek_bu2614_transmit(struct gemtek_device *dev)
{
- if(dev->muted)
- return;
+ int i, bit, q, mute;
+
spin_lock(&lock);
- outb(0x10, io);
+
+ mute = dev->muted ? GEMTEK_MT : 0x00;
+
+ outb_p(mute | GEMTEK_DA | GEMTEK_CK, io);
+ udelay(SHORT_DELAY);
+ outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, io);
+ udelay(LONG_DELAY);
+
+ for (i = 0, q = dev->bu2614data; i < 32; i++, q >>= 1) {
+ bit = (q & 1) ? GEMTEK_DA : 0;
+ outb_p(mute | GEMTEK_CE | bit, io);
+ udelay(SHORT_DELAY);
+ outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, io);
+ udelay(SHORT_DELAY);
+ }
+
+ outb_p(mute | GEMTEK_DA | GEMTEK_CK, io);
+ udelay(SHORT_DELAY);
+ outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, io);
+ udelay(LONG_DELAY);
+
spin_unlock(&lock);
- dev->muted = 1;
}
-static void gemtek_unmute(struct gemtek_device *dev)
+/*
+ * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected).
+ */
+static unsigned long gemtek_convfreq(unsigned long freq)
{
- if(dev->muted == 0)
+ return ((freq<<FSCALE) + IF_OFFSET + REF_FREQ/2) / REF_FREQ;
+}
+
+/*
+ * Set FM-frequency.
+ */
+static void gemtek_setfreq(struct gemtek_device *dev, unsigned long freq)
+{
+
+ if (keepmuted && hardmute && dev->muted)
return;
- spin_lock(&lock);
- outb(0x20, io);
- spin_unlock(&lock);
+
+ if (freq < GEMTEK_LOWFREQ)
+ freq = GEMTEK_LOWFREQ;
+ else if (freq > GEMTEK_HIGHFREQ)
+ freq = GEMTEK_HIGHFREQ;
+
+ dev->lastfreq = freq;
dev->muted = 0;
+
+ gemtek_bu2614_set(dev, BU2614_PORT, 0);
+ gemtek_bu2614_set(dev, BU2614_FMES, 0);
+ gemtek_bu2614_set(dev, BU2614_SWIN, 0); /* FM-mode */
+ gemtek_bu2614_set(dev, BU2614_SWAL, 0);
+ gemtek_bu2614_set(dev, BU2614_FMUN, 1); /* GT bit set */
+ gemtek_bu2614_set(dev, BU2614_TEST, 0);
+
+ gemtek_bu2614_set(dev, BU2614_STDF, GEMTEK_STDF_3_125_KHZ);
+ gemtek_bu2614_set(dev, BU2614_FREQ, gemtek_convfreq(freq));
+
+ gemtek_bu2614_transmit(dev);
}
-static void zero(void)
+/*
+ * Set mute flag.
+ */
+static void gemtek_mute(struct gemtek_device *dev)
{
- outb_p(0x04, io);
- udelay(5);
- outb_p(0x05, io);
- udelay(5);
+ int i;
+ dev->muted = 1;
+
+ if (hardmute) {
+ /* Turn off PLL, disable data output */
+ gemtek_bu2614_set(dev, BU2614_PORT, 0);
+ gemtek_bu2614_set(dev, BU2614_FMES, 0); /* CT bit off */
+ gemtek_bu2614_set(dev, BU2614_SWIN, 0); /* FM-mode */
+ gemtek_bu2614_set(dev, BU2614_SWAL, 0);
+ gemtek_bu2614_set(dev, BU2614_FMUN, 0); /* GT bit off */
+ gemtek_bu2614_set(dev, BU2614_TEST, 0);
+ gemtek_bu2614_set(dev, BU2614_STDF, GEMTEK_PLL_OFF);
+ gemtek_bu2614_set(dev, BU2614_FREQ, 0);
+ gemtek_bu2614_transmit(dev);
+ } else {
+ spin_lock(&lock);
+
+ /* Read bus contents (CE, CK and DA). */
+ i = inb_p(io);
+ /* Write it back with mute flag set. */
+ outb_p((i >> 5) | GEMTEK_MT, io);
+ udelay(SHORT_DELAY);
+
+ spin_unlock(&lock);
+ }
}
-static void one(void)
+/*
+ * Unset mute flag.
+ */
+static void gemtek_unmute(struct gemtek_device *dev)
{
- outb_p(0x06, io);
- udelay(5);
- outb_p(0x07, io);
- udelay(5);
+ int i;
+ dev->muted = 0;
+
+ if (hardmute) {
+ /* Turn PLL back on. */
+ gemtek_setfreq(dev, dev->lastfreq);
+ } else {
+ spin_lock(&lock);
+
+ i = inb_p(io);
+ outb_p(i >> 5, io);
+ udelay(SHORT_DELAY);
+
+ spin_unlock(&lock);
+ }
}
-static int gemtek_setfreq(struct gemtek_device *dev, unsigned long freq)
+/*
+ * Get signal strength (= stereo status).
+ */
+static inline int gemtek_getsigstr(void)
{
- int i;
+ return inb_p(io) & GEMTEK_NS ? 0 : 1;
+}
-/* freq = 78.25*((float)freq/16000.0 + 10.52); */
+/*
+ * Check if requested card acts like GemTek Radio card.
+ */
+static int gemtek_verify(int port)
+{
+ static int verified = -1;
+ int i, q;
- freq /= 16;
- freq += 10520;
- freq *= 7825;
- freq /= 100000;
+ if (verified == port)
+ return 1;
spin_lock(&lock);
- /* 2 start bits */
- outb_p(0x03, io);
- udelay(5);
- outb_p(0x07, io);
- udelay(5);
+ q = inb_p(port); /* Read bus contents before probing. */
+ /* Try to turn on CE, CK and DA respectively and check if card responds
+ properly. */
+ for (i = 0; i < 3; ++i) {
+ outb_p(1 << i, port);
+ udelay(SHORT_DELAY);
- /* 28 frequency bits (lsb first) */
- for (i = 0; i < 14; i++)
- if (freq & (1 << i))
- one();
- else
- zero();
- /* 36 unknown bits */
- for (i = 0; i < 11; i++)
- zero();
- one();
- for (i = 0; i < 4; i++)
- zero();
- one();
- zero();
-
- /* 2 end bits */
- outb_p(0x03, io);
- udelay(5);
- outb_p(0x07, io);
- udelay(5);
+ if ((inb_p(port) & (~GEMTEK_NS)) != (0x17 | (1 << (i + 5)))) {
+ spin_unlock(&lock);
+ return 0;
+ }
+ }
+ outb_p(q >> 5, port); /* Write bus contents back. */
+ udelay(SHORT_DELAY);
spin_unlock(&lock);
+ verified = port;
- return 0;
+ return 1;
}
-static int gemtek_getsigstr(struct gemtek_device *dev)
+/*
+ * Automatic probing for card.
+ */
+static int gemtek_probe(void)
{
- spin_lock(&lock);
- inb(io);
- udelay(5);
- spin_unlock(&lock);
- if (inb(io) & 8) /* bit set = no signal present */
- return 0;
- return 1; /* signal present */
+ int ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c };
+ int i;
+
+ if (!probe) {
+ printk(KERN_INFO "Automatic device probing disabled.\n");
+ return -1;
+ }
+
+ printk(KERN_INFO "Automatic device probing enabled.\n");
+
+ for (i = 0; i < ARRAY_SIZE(ioports); ++i) {
+ printk(KERN_INFO "Trying I/O port 0x%x...\n", ioports[i]);
+
+ if (!request_region(ioports[i], 1, "gemtek-probe")) {
+ printk(KERN_WARNING "I/O port 0x%x busy!\n",
+ ioports[i]);
+ continue;
+ }
+
+ if (gemtek_verify(ioports[i])) {
+ printk(KERN_INFO "Card found from I/O port "
+ "0x%x!\n", ioports[i]);
+
+ release_region(ioports[i], 1);
+
+ io = ioports[i];
+ return io;
+ }
+
+ release_region(ioports[i], 1);
+ }
+
+ printk(KERN_ERR "Automatic probing failed!\n");
+
+ return -1;
}
-static int vidioc_querycap(struct file *file, void *priv,
- struct v4l2_capability *v)
+/*
+ * Video 4 Linux stuff.
+ */
+
+static struct v4l2_queryctrl radio_qctrl[] = {
+ {
+ .id = V4L2_CID_AUDIO_MUTE,
+ .name = "Mute",
+ .minimum = 0,
+ .maximum = 1,
+ .default_value = 1,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ }, {
+ .id = V4L2_CID_AUDIO_VOLUME,
+ .name = "Volume",
+ .minimum = 0,
+ .maximum = 65535,
+ .step = 65535,
+ .default_value = 0xff,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ }
+};
+
+static struct file_operations gemtek_fops = {
+ .owner = THIS_MODULE,
+ .open = video_exclusive_open,
+ .release = video_exclusive_release,
+ .ioctl = video_ioctl2,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .llseek = no_llseek
+};
+
+static int vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *v)
{
strlcpy(v->driver, "radio-gemtek", sizeof(v->driver));
strlcpy(v->card, "GemTek", sizeof(v->card));
@@ -172,28 +412,29 @@ static int vidioc_querycap(struct file *file, void *priv,
return 0;
}
-static int vidioc_g_tuner(struct file *file, void *priv,
- struct v4l2_tuner *v)
+static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v)
{
- struct video_device *dev = video_devdata(file);
- struct gemtek_device *rt = dev->priv;
-
if (v->index > 0)
return -EINVAL;
strcpy(v->name, "FM");
v->type = V4L2_TUNER_RADIO;
- v->rangelow = (87*16000);
- v->rangehigh = (108*16000);
- v->rxsubchans = V4L2_TUNER_SUB_MONO;
- v->capability = V4L2_TUNER_CAP_LOW;
- v->audmode = V4L2_TUNER_MODE_MONO;
- v->signal = 0xffff*gemtek_getsigstr(rt);
+ v->rangelow = GEMTEK_LOWFREQ;
+ v->rangehigh = GEMTEK_HIGHFREQ;
+ v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
+ v->signal = 0xffff * gemtek_getsigstr();
+ if (v->signal) {
+ v->audmode = V4L2_TUNER_MODE_STEREO;
+ v->rxsubchans = V4L2_TUNER_SUB_STEREO;
+ } else {
+ v->audmode = V4L2_TUNER_MODE_MONO;
+ v->rxsubchans = V4L2_TUNER_SUB_MONO;
+ }
+
return 0;
}
-static int vidioc_s_tuner(struct file *file, void *priv,
- struct v4l2_tuner *v)
+static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *v)
{
if (v->index > 0)
return -EINVAL;
@@ -201,38 +442,35 @@ static int vidioc_s_tuner(struct file *file, void *priv,
}
static int vidioc_s_frequency(struct file *file, void *priv,
- struct v4l2_frequency *f)
+ struct v4l2_frequency *f)
{
struct video_device *dev = video_devdata(file);
struct gemtek_device *rt = dev->priv;
- rt->curfreq = f->frequency;
- /* needs to be called twice in order for getsigstr to work */
- gemtek_setfreq(rt, rt->curfreq);
- gemtek_setfreq(rt, rt->curfreq);
+ gemtek_setfreq(rt, f->frequency);
+
return 0;
}
static int vidioc_g_frequency(struct file *file, void *priv,
- struct v4l2_frequency *f)
+ struct v4l2_frequency *f)
{
struct video_device *dev = video_devdata(file);
struct gemtek_device *rt = dev->priv;
f->type = V4L2_TUNER_RADIO;
- f->frequency = rt->curfreq;
+ f->frequency = rt->lastfreq;
return 0;
}
static int vidioc_queryctrl(struct file *file, void *priv,
- struct v4l2_queryctrl *qc)
+ struct v4l2_queryctrl *qc)
{
int i;
- for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
+ for (i = 0; i < ARRAY_SIZE(radio_qctrl); ++i) {
if (qc->id && qc->id == radio_qctrl[i].id) {
- memcpy(qc, &(radio_qctrl[i]),
- sizeof(*qc));
+ memcpy(qc, &(radio_qctrl[i]), sizeof(*qc));
return 0;
}
}
@@ -240,7 +478,7 @@ static int vidioc_queryctrl(struct file *file, void *priv,
}
static int vidioc_g_ctrl(struct file *file, void *priv,
- struct v4l2_control *ctrl)
+ struct v4l2_control *ctrl)
{
struct video_device *dev = video_devdata(file);
struct gemtek_device *rt = dev->priv;
@@ -260,7 +498,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv,
}
static int vidioc_s_ctrl(struct file *file, void *priv,
- struct v4l2_control *ctrl)
+ struct v4l2_control *ctrl)
{
struct video_device *dev = video_devdata(file);
struct gemtek_device *rt = dev->priv;
@@ -282,8 +520,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
return -EINVAL;
}
-static int vidioc_g_audio (struct file *file, void *priv,
- struct v4l2_audio *a)
+static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
{
if (a->index > 1)
return -EINVAL;
@@ -306,99 +543,102 @@ static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
return 0;
}
-static int vidioc_s_audio(struct file *file, void *priv,
- struct v4l2_audio *a)
+static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a)
{
if (a->index != 0)
return -EINVAL;
return 0;
}
-static struct gemtek_device gemtek_unit;
-
-static const struct file_operations gemtek_fops = {
- .owner = THIS_MODULE,
- .open = video_exclusive_open,
- .release = video_exclusive_release,
- .ioctl = video_ioctl2,
- .compat_ioctl = v4l_compat_ioctl32,
- .llseek = no_llseek,
+static struct video_device gemtek_radio = {
+ .owner = THIS_MODULE,
+ .name = "GemTek Radio card",
+ .type = VID_TYPE_TUNER,
+ .hardware = VID_HARDWARE_GEMTEK,
+ .fops = &gemtek_fops,
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_g_tuner = vidioc_g_tuner,
+ .vidioc_s_tuner = vidioc_s_tuner,
+ .vidioc_g_audio = vidioc_g_audio,
+ .vidioc_s_audio = vidioc_s_audio,
+ .vidioc_g_input = vidioc_g_input,
+ .vidioc_s_input = vidioc_s_input,
+ .vidioc_g_frequency = vidioc_g_frequency,
+ .vidioc_s_frequency = vidioc_s_frequency,
+ .vidioc_queryctrl = vidioc_queryctrl,
+ .vidioc_g_ctrl = vidioc_g_ctrl,
+ .vidioc_s_ctrl = vidioc_s_ctrl
};
-static struct video_device gemtek_radio=
-{
- .owner = THIS_MODULE,
- .name = "GemTek radio",
- .type = VID_TYPE_TUNER,
- .fops = &gemtek_fops,
- .vidioc_querycap = vidioc_querycap,
- .vidioc_g_tuner = vidioc_g_tuner,
- .vidioc_s_tuner = vidioc_s_tuner,
- .vidioc_g_audio = vidioc_g_audio,
- .vidioc_s_audio = vidioc_s_audio,
- .vidioc_g_input = vidioc_g_input,
- .vidioc_s_input = vidioc_s_input,
- .vidioc_g_frequency = vidioc_g_frequency,
- .vidioc_s_frequency = vidioc_s_frequency,
- .vidioc_queryctrl = vidioc_queryctrl,
- .vidioc_g_ctrl = vidioc_g_ctrl,
- .vidioc_s_ctrl = vidioc_s_ctrl,
-};
+/*
+ * Initialization / cleanup related stuff.
+ */
+/*
+ * Initilize card.
+ */
static int __init gemtek_init(void)
{
- if(io==-1)
- {
- printk(KERN_ERR "You must set an I/O address with io=0x20c, io=0x30c, io=0x24c or io=0x34c (io=0x020c or io=0x248 for the combined sound/radiocard)\n");
- return -EINVAL;
- }
+ printk(KERN_INFO RADIO_BANNER "\n");
- if (!request_region(io, 4, "gemtek"))
- {
- printk(KERN_ERR "gemtek: port 0x%x already in use\n", io);
- return -EBUSY;
- }
+ spin_lock_init(&lock);
- gemtek_radio.priv=&gemtek_unit;
+ gemtek_probe();
+ if (io) {
+ if (!request_region(io, 1, "gemtek")) {
+ printk(KERN_ERR "I/O port 0x%x already in use.\n", io);
+ return -EBUSY;
+ }
- if(video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
- release_region(io, 4);
+ if (!gemtek_verify(io))
+ printk(KERN_WARNING "Card at I/O port 0x%x does not "
+ "respond properly, check your "
+ "configuration.\n", io);
+ else
+ printk(KERN_INFO "Using I/O port 0x%x.\n", io);
+ } else if (probe) {
+ printk(KERN_ERR "Automatic probing failed and no "
+ "fixed I/O port defined.\n");
+ return -ENODEV;
+ } else {
+ printk(KERN_ERR "Automatic probing disabled but no fixed "
+ "I/O port defined.");
return -EINVAL;
}
- printk(KERN_INFO "GemTek Radio Card driver.\n");
- spin_lock_init(&lock);
+ gemtek_radio.priv = &gemtek_unit;
- /* this is _maybe_ unnecessary */
- outb(0x01, io);
+ if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO,
+ radio_nr) == -1) {
+ release_region(io, 1);
+ return -EBUSY;
+ }
- /* mute card - prevents noisy bootups */
- gemtek_unit.muted = 0;
- gemtek_mute(&gemtek_unit);
+ /* Set defaults */
+ gemtek_unit.lastfreq = GEMTEK_LOWFREQ;
+ gemtek_unit.bu2614data = 0;
+
+ if (initmute)
+ gemtek_mute(&gemtek_unit);
return 0;
}
-MODULE_AUTHOR("Jonas Munsin");
-MODULE_DESCRIPTION("A driver for the GemTek Radio Card");
-MODULE_LICENSE("GPL");
-
-module_param(io, int, 0);
-MODULE_PARM_DESC(io, "I/O address of the GemTek card (0x20c, 0x30c, 0x24c or 0x34c (0x20c or 0x248 have been reported to work for the combined sound/radiocard)).");
-module_param(radio_nr, int, 0);
-
-static void __exit gemtek_cleanup(void)
+/*
+ * Module cleanup
+ */
+static void __exit gemtek_exit(void)
{
+ if (shutdown) {
+ hardmute = 1; /* Turn off PLL */
+ gemtek_mute(&gemtek_unit);
+ } else {
+ printk(KERN_INFO "Module unloaded but card not muted!\n");
+ }
+
video_unregister_device(&gemtek_radio);
- release_region(io,4);
+ release_region(io, 1);
}
module_init(gemtek_init);
-module_exit(gemtek_cleanup);
-
-/*
- Local variables:
- compile-command: "gcc -c -DMODVERSIONS -D__KERNEL__ -DMODULE -O6 -Wall -Wstrict-prototypes -I /home/blp/tmp/linux-2.1.111-rtrack/include radio-rtrack2.c"
- End:
-*/
+module_exit(gemtek_exit);
diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c
index 7e1911c3d54..535ffe8c810 100644
--- a/drivers/media/radio/radio-terratec.c
+++ b/drivers/media/radio/radio-terratec.c
@@ -173,7 +173,7 @@ static int tt_setfreq(struct tt_device *dev, unsigned long freq1)
i--;
p--;
temp = temp/2;
- }
+ }
spin_lock(&lock);
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index e204e7b4028..2e571eb9313 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -148,6 +148,15 @@ config VIDEO_WM8739
To compile this driver as a module, choose M here: the
module will be called wm8739.
+config VIDEO_VP27SMPX
+ tristate "Panasonic VP27s internal MPX"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the internal MPX of the Panasonic VP27s tuner.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vp27smpx.
+
comment "Video decoders"
config VIDEO_BT819
@@ -197,6 +206,13 @@ config VIDEO_OV7670
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
+config VIDEO_TCM825X
+ tristate "TCM825x camera sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a driver for the Toshiba TCM825x VGA camera sensor.
+ It is used for example in Nokia N800.
+
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
depends on VIDEO_V4L1 && I2C
@@ -348,7 +364,7 @@ endmenu # encoder / decoder chips
config VIDEO_VIVI
tristate "Virtual Video Driver"
depends on VIDEO_V4L2 && !SPARC32 && !SPARC64 && PCI
- select VIDEO_BUF
+ select VIDEOBUF_VMALLOC
default n
---help---
Enables a virtual video driver. This device shows a color bar
@@ -489,15 +505,6 @@ config TUNER_3036
Say Y here to include support for Philips SAB3036 compatible tuners.
If in doubt, say N.
-config TUNER_TEA5761
- bool "TEA 5761 radio tuner (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- depends on I2C
- select VIDEO_TUNER
- help
- Say Y here to include support for Philips TEA5761 radio tuner.
- If in doubt, say N.
-
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
@@ -661,6 +668,8 @@ config VIDEO_HEXIUM_GEMINI
source "drivers/media/video/cx88/Kconfig"
+source "drivers/media/video/cx23885/Kconfig"
+
source "drivers/media/video/ivtv/Kconfig"
config VIDEO_M32R_AR
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 10b4d446901..b5a064163e0 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -4,14 +4,12 @@
zr36067-objs := zoran_procfs.o zoran_device.o \
zoran_driver.o zoran_card.o
-tuner-objs := tuner-core.o tuner-types.o tuner-simple.o \
- mt20xx.o tda8290.o tea5767.o tda9887.o
-
-tuner-$(CONFIG_TUNER_TEA5761) += tea5761.o
+tuner-objs := tuner-core.o tuner-types.o tda9887.o
msp3400-objs := msp3400-driver.o msp3400-kthreads.o
-obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o
+obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o \
+ v4l2-int-device.o
ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
@@ -63,7 +61,6 @@ obj-$(CONFIG_VIDEO_CPIA_USB) += cpia_usb.o
obj-$(CONFIG_VIDEO_MEYE) += meye.o
obj-$(CONFIG_VIDEO_SAA7134) += saa7134/
obj-$(CONFIG_VIDEO_CX88) += cx88/
-obj-$(CONFIG_VIDEO_IVTV) += ivtv/
obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
@@ -73,6 +70,7 @@ obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o
obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o
obj-$(CONFIG_VIDEO_WM8775) += wm8775.o
obj-$(CONFIG_VIDEO_WM8739) += wm8739.o
+obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/
obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
obj-$(CONFIG_VIDEO_MXB) += mxb.o
@@ -82,8 +80,17 @@ obj-$(CONFIG_VIDEO_DPC) += dpc7146.o
obj-$(CONFIG_TUNER_3036) += tuner-3036.o
obj-$(CONFIG_VIDEO_TUNER) += tuner.o
-obj-$(CONFIG_VIDEO_BUF) += video-buf.o
-obj-$(CONFIG_VIDEO_BUF_DVB) += video-buf-dvb.o
+
+obj-$(CONFIG_TUNER_SIMPLE) += tuner-simple.o
+obj-$(CONFIG_TUNER_MT20XX) += mt20xx.o
+obj-$(CONFIG_TUNER_TDA8290) += tda8290.o
+obj-$(CONFIG_TUNER_TEA5767) += tea5767.o
+obj-$(CONFIG_TUNER_TEA5761) += tea5761.o
+
+obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
+obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
+obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o
+obj-$(CONFIG_VIDEOBUF_DVB) += videobuf-dvb.o
obj-$(CONFIG_VIDEO_BTCX) += btcx-risc.o
obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
@@ -97,6 +104,8 @@ obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
+obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
+
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_OV511) += ov511.o
obj-$(CONFIG_USB_SE401) += se401.o
@@ -114,6 +123,9 @@ obj-$(CONFIG_USB_KONICAWC) += usbvideo/
obj-$(CONFIG_USB_VICAM) += usbvideo/
obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/
+obj-$(CONFIG_VIDEO_IVTV) += ivtv/
+
obj-$(CONFIG_VIDEO_VIVI) += vivi.o
+obj-$(CONFIG_VIDEO_CX23885) += cx23885/
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c
index 649f52f9ad2..19e9929ffa0 100644
--- a/drivers/media/video/arv.c
+++ b/drivers/media/video/arv.c
@@ -23,7 +23,6 @@
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
@@ -442,7 +441,7 @@ static int ar_do_ioctl(struct inode *inode, struct file *file,
{
struct video_window *w = arg;
DEBUG(1, "VIDIOCGWIN:\n");
- memset(w, 0, sizeof(w));
+ memset(w, 0, sizeof(*w));
w->width = ar->width;
w->height = ar->height;
return 0;
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 58eae887a62..2ca162b390a 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -4,7 +4,7 @@ config VIDEO_BT848
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
- select VIDEO_BUF
+ select VIDEOBUF_DMA_SG
select VIDEO_IR
select VIDEO_TUNER
select VIDEO_TVEEPROM
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index f6715007d40..dd6a7d68b07 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -27,7 +27,6 @@
#include <linux/delay.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kmod.h>
#include <linux/init.h>
#include <linux/pci.h>
@@ -2989,6 +2988,23 @@ struct tvcard bttv_tvcards[] = {
.no_tda9875 = 1,
.no_tda7432 = 1,
},
+ /* ---- card 0x95---------------------------------- */
+ [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
+ .name = "Typhoon TV-Tuner PCI (50684)",
+ .video_inputs = 3,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = 2,
+ .gpiomask = 0x3014f,
+ .muxsel = { 2, 3, 1, 1 },
+ .gpiomux = { 0x20001,0x10001, 0, 0 },
+ .gpiomute = 10,
+ .needs_tvaudio = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL_I,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ },
};
static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
@@ -3276,15 +3292,15 @@ static void eagle_muxsel(struct bttv *btv, unsigned int input)
btaor((2)<<5, ~(3<<5), BT848_IFORM);
gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
- /* composite */
- /* set chroma ADC to sleep */
- btor(BT848_ADC_C_SLEEP, BT848_ADC);
- /* set to composite video */
- btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
- btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
+ /* composite */
+ /* set chroma ADC to sleep */
+ btor(BT848_ADC_C_SLEEP, BT848_ADC);
+ /* set to composite video */
+ btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
+ btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
- /* switch sync drive off */
- gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
+ /* switch sync drive off */
+ gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
}
static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
@@ -3453,7 +3469,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
}
break;
- case BTTV_BOARD_STB2:
+ case BTTV_BOARD_STB2:
if (btv->cardid == 0x3060121a) {
/* Fix up entry for 3DFX VoodooTV 100,
which is an OEM STB card variant. */
@@ -3784,7 +3800,7 @@ static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
for (i = 12; i < 21; i++)
serial *= 10, serial += ee[i] - '0';
}
- } else {
+ } else {
unsigned short type;
for (i = 4*16; i < 8*16; i += 16) {
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index cb555f2c40f..7a332b3efe5 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -30,7 +30,6 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
@@ -155,13 +154,14 @@ MODULE_LICENSE("GPL");
/* ----------------------------------------------------------------------- */
/* sysfs */
-static ssize_t show_card(struct class_device *cd, char *buf)
+static ssize_t show_card(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct video_device *vfd = to_video_device(cd);
struct bttv *btv = dev_get_drvdata(vfd->dev);
return sprintf(buf, "%d\n", btv ? btv->c.type : UNSET);
}
-static CLASS_DEVICE_ATTR(card, S_IRUGO, show_card, NULL);
+static DEVICE_ATTR(card, S_IRUGO, show_card, NULL);
/* ----------------------------------------------------------------------- */
/* dvb auto-load setup */
@@ -2583,7 +2583,7 @@ static int setup_window(struct bttv_fh *fh, struct bttv *btv,
if (check_btres(fh, RESOURCE_OVERLAY)) {
struct bttv_buffer *new;
- new = videobuf_alloc(sizeof(*new));
+ new = videobuf_pci_alloc(sizeof(*new));
new->crop = btv->crop[!!fh->do_crop].rect;
bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new);
retval = bttv_switch_overlay(btv,fh,new);
@@ -3049,7 +3049,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
mutex_lock(&fh->cap.lock);
if (*on) {
fh->ov.tvnorm = btv->tvnorm;
- new = videobuf_alloc(sizeof(*new));
+ new = videobuf_pci_alloc(sizeof(*new));
new->crop = btv->crop[!!fh->do_crop].rect;
bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new);
} else {
@@ -3072,6 +3072,8 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
V4L2_MEMORY_MMAP);
if (retval < 0)
goto fh_unlock_and_return;
+
+ gbuffers = retval;
memset(mbuf,0,sizeof(*mbuf));
mbuf->frames = gbuffers;
mbuf->size = gbuffers * gbufsize;
@@ -3142,9 +3144,12 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
retval = -EIO;
/* fall through */
case STATE_DONE:
- videobuf_dma_sync(&fh->cap,&buf->vb.dma);
+ {
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+ videobuf_dma_sync(&fh->cap,dma);
bttv_dma_free(&fh->cap,btv,buf);
break;
+ }
default:
retval = -EINVAL;
break;
@@ -3338,7 +3343,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
if (check_btres(fh, RESOURCE_OVERLAY)) {
struct bttv_buffer *new;
- new = videobuf_alloc(sizeof(*new));
+ new = videobuf_pci_alloc(sizeof(*new));
new->crop = btv->crop[!!fh->do_crop].rect;
bttv_overlay_risc(btv,&fh->ov,fh->ovfmt,new);
retval = bttv_switch_overlay(btv,fh,new);
@@ -3697,7 +3702,7 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait)
mutex_unlock(&fh->cap.lock);
return POLLERR;
}
- fh->cap.read_buf = videobuf_alloc(fh->cap.msize);
+ fh->cap.read_buf = videobuf_pci_alloc(fh->cap.msize);
if (NULL == fh->cap.read_buf) {
mutex_unlock(&fh->cap.lock);
return POLLERR;
@@ -3764,13 +3769,13 @@ static int bttv_open(struct inode *inode, struct file *file)
fh->ov.setup_ok = 0;
v4l2_prio_open(&btv->prio,&fh->prio);
- videobuf_queue_init(&fh->cap, &bttv_video_qops,
+ videobuf_queue_pci_init(&fh->cap, &bttv_video_qops,
btv->c.pci, &btv->s_lock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
sizeof(struct bttv_buffer),
fh);
- videobuf_queue_init(&fh->vbi, &bttv_vbi_qops,
+ videobuf_queue_pci_init(&fh->vbi, &bttv_vbi_qops,
btv->c.pci, &btv->s_lock,
V4L2_BUF_TYPE_VBI_CAPTURE,
V4L2_FIELD_SEQ_TB,
@@ -4613,9 +4618,9 @@ static int __devinit bttv_register_video(struct bttv *btv)
goto err;
printk(KERN_INFO "bttv%d: registered device video%d\n",
btv->c.nr,btv->video_dev->minor & 0x1f);
- if (class_device_create_file(&btv->video_dev->class_dev,
- &class_device_attr_card)<0) {
- printk(KERN_ERR "bttv%d: class_device_create_file 'card' "
+ if (device_create_file(&btv->video_dev->class_dev,
+ &dev_attr_card)<0) {
+ printk(KERN_ERR "bttv%d: device_create_file 'card' "
"failed\n", btv->c.nr);
goto err;
}
diff --git a/drivers/media/video/bt8xx/bttv-gpio.c b/drivers/media/video/bt8xx/bttv-gpio.c
index 84154c26f9c..dce6dae5740 100644
--- a/drivers/media/video/bt8xx/bttv-gpio.c
+++ b/drivers/media/video/bt8xx/bttv-gpio.c
@@ -106,11 +106,9 @@ int bttv_sub_add_device(struct bttv_core *core, char *name)
int bttv_sub_del_devices(struct bttv_core *core)
{
- struct bttv_sub_device *sub;
- struct list_head *item,*save;
+ struct bttv_sub_device *sub, *save;
- list_for_each_safe(item,save,&core->subs) {
- sub = list_entry(item,struct bttv_sub_device,list);
+ list_for_each_entry_safe(sub, save, &core->subs, list) {
list_del(&sub->list);
device_unregister(&sub->dev);
}
diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
index 0dfa49b6641..844f1762c45 100644
--- a/drivers/media/video/bt8xx/bttv-i2c.c
+++ b/drivers/media/video/bt8xx/bttv-i2c.c
@@ -28,7 +28,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 4201552bc3c..e7c521b8444 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -19,7 +19,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index e7104d9cb4b..58986f1a5f1 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -574,10 +574,12 @@ bttv_risc_hook(struct bttv *btv, int slot, struct btcx_riscmem *risc,
void
bttv_dma_free(struct videobuf_queue *q,struct bttv *btv, struct bttv_buffer *buf)
{
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+
BUG_ON(in_interrupt());
videobuf_waiton(&buf->vb,0,0);
- videobuf_dma_unmap(q, &buf->vb.dma);
- videobuf_dma_free(&buf->vb.dma);
+ videobuf_dma_unmap(q, dma);
+ videobuf_dma_free(dma);
btcx_riscmem_free(btv->c.pci,&buf->bottom);
btcx_riscmem_free(btv->c.pci,&buf->top);
buf->vb.state = STATE_NEEDS_INIT;
@@ -699,6 +701,7 @@ int
bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
{
const struct bttv_tvnorm *tvnorm = bttv_tvnorms + buf->tvnorm;
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
dprintk(KERN_DEBUG
"bttv%d: buffer field: %s format: %s size: %dx%d\n",
@@ -716,25 +719,25 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
switch (buf->vb.field) {
case V4L2_FIELD_TOP:
- bttv_risc_packed(btv,&buf->top,buf->vb.dma.sglist,
+ bttv_risc_packed(btv,&buf->top,dma->sglist,
/* offset */ 0,bpl,
/* padding */ 0,/* skip_lines */ 0,
buf->vb.height);
break;
case V4L2_FIELD_BOTTOM:
- bttv_risc_packed(btv,&buf->bottom,buf->vb.dma.sglist,
+ bttv_risc_packed(btv,&buf->bottom,dma->sglist,
0,bpl,0,0,buf->vb.height);
break;
case V4L2_FIELD_INTERLACED:
- bttv_risc_packed(btv,&buf->top,buf->vb.dma.sglist,
+ bttv_risc_packed(btv,&buf->top,dma->sglist,
0,bpl,bpl,0,buf->vb.height >> 1);
- bttv_risc_packed(btv,&buf->bottom,buf->vb.dma.sglist,
+ bttv_risc_packed(btv,&buf->bottom,dma->sglist,
bpl,bpl,bpl,0,buf->vb.height >> 1);
break;
case V4L2_FIELD_SEQ_TB:
- bttv_risc_packed(btv,&buf->top,buf->vb.dma.sglist,
+ bttv_risc_packed(btv,&buf->top,dma->sglist,
0,bpl,0,0,buf->vb.height >> 1);
- bttv_risc_packed(btv,&buf->bottom,buf->vb.dma.sglist,
+ bttv_risc_packed(btv,&buf->bottom,dma->sglist,
bpf,bpl,0,0,buf->vb.height >> 1);
break;
default:
@@ -767,7 +770,7 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
bttv_calc_geo(btv,&buf->geo,buf->vb.width,
buf->vb.height,/* both_fields */ 0,
tvnorm,&buf->crop);
- bttv_risc_planar(btv, &buf->top, buf->vb.dma.sglist,
+ bttv_risc_planar(btv, &buf->top, dma->sglist,
0,buf->vb.width,0,buf->vb.height,
uoffset,voffset,buf->fmt->hshift,
buf->fmt->vshift,0);
@@ -776,7 +779,7 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
bttv_calc_geo(btv,&buf->geo,buf->vb.width,
buf->vb.height,0,
tvnorm,&buf->crop);
- bttv_risc_planar(btv, &buf->bottom, buf->vb.dma.sglist,
+ bttv_risc_planar(btv, &buf->bottom, dma->sglist,
0,buf->vb.width,0,buf->vb.height,
uoffset,voffset,buf->fmt->hshift,
buf->fmt->vshift,0);
@@ -789,14 +792,14 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
ypadding = buf->vb.width;
cpadding = buf->vb.width >> buf->fmt->hshift;
bttv_risc_planar(btv,&buf->top,
- buf->vb.dma.sglist,
+ dma->sglist,
0,buf->vb.width,ypadding,lines,
uoffset,voffset,
buf->fmt->hshift,
buf->fmt->vshift,
cpadding);
bttv_risc_planar(btv,&buf->bottom,
- buf->vb.dma.sglist,
+ dma->sglist,
ypadding,buf->vb.width,ypadding,lines,
uoffset+cpadding,
voffset+cpadding,
@@ -812,7 +815,7 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
ypadding = buf->vb.width;
cpadding = buf->vb.width >> buf->fmt->hshift;
bttv_risc_planar(btv,&buf->top,
- buf->vb.dma.sglist,
+ dma->sglist,
0,buf->vb.width,0,lines,
uoffset >> 1,
voffset >> 1,
@@ -820,7 +823,7 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
buf->fmt->vshift,
0);
bttv_risc_planar(btv,&buf->bottom,
- buf->vb.dma.sglist,
+ dma->sglist,
lines * ypadding,buf->vb.width,0,lines,
lines * ypadding + (uoffset >> 1),
lines * ypadding + (voffset >> 1),
@@ -839,10 +842,10 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
buf->vb.field = V4L2_FIELD_SEQ_TB;
bttv_calc_geo(btv,&buf->geo,tvnorm->swidth,tvnorm->sheight,
1,tvnorm,&buf->crop);
- bttv_risc_packed(btv, &buf->top, buf->vb.dma.sglist,
+ bttv_risc_packed(btv, &buf->top, dma->sglist,
/* offset */ 0, RAW_BPL, /* padding */ 0,
/* skip_lines */ 0, RAW_LINES);
- bttv_risc_packed(btv, &buf->bottom, buf->vb.dma.sglist,
+ bttv_risc_packed(btv, &buf->bottom, dma->sglist,
buf->vb.size/2 , RAW_BPL, 0, 0, RAW_LINES);
}
diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c
index 93e35de5a18..346ce019bdc 100644
--- a/drivers/media/video/bt8xx/bttv-vbi.c
+++ b/drivers/media/video/bt8xx/bttv-vbi.c
@@ -24,7 +24,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/kernel.h>
@@ -151,13 +150,14 @@ static int vbi_buffer_prepare(struct videobuf_queue *q,
if (redo_dma_risc) {
unsigned int bpl, padding, offset;
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
bpl = 2044; /* max. vbipack */
padding = VBI_BPL - bpl;
if (fh->vbi_fmt.fmt.count[0] > 0) {
rc = bttv_risc_packed(btv, &buf->top,
- buf->vb.dma.sglist,
+ dma->sglist,
/* offset */ 0, bpl,
padding, skip_lines0,
fh->vbi_fmt.fmt.count[0]);
@@ -169,7 +169,7 @@ static int vbi_buffer_prepare(struct videobuf_queue *q,
offset = fh->vbi_fmt.fmt.count[0] * VBI_BPL;
rc = bttv_risc_packed(btv, &buf->bottom,
- buf->vb.dma.sglist,
+ dma->sglist,
offset, bpl,
padding, skip_lines1,
fh->vbi_fmt.fmt.count[1]);
diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h
index dcc847dc248..19e75d50a10 100644
--- a/drivers/media/video/bt8xx/bttv.h
+++ b/drivers/media/video/bt8xx/bttv.h
@@ -172,6 +172,8 @@
#define BTTV_BOARD_SSAI_ULTRASOUND 0x92
#define BTTV_BOARD_VOODOOTV_200 0x93
#define BTTV_BOARD_DVICO_FUSIONHDTV_2 0x94
+#define BTTV_BOARD_TYPHOON_TVTUNERPCI 0x95
+
/* more card-specific defines */
#define PT2254_L_CHANNEL 0x10
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 5b25faca150..0b92c35a843 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -41,7 +41,7 @@
#include <media/v4l2-common.h>
#include <linux/device.h>
-#include <media/video-buf.h>
+#include <media/videobuf-dma-sg.h>
#include <media/tuner.h>
#include <media/tveeprom.h>
#include <media/ir-common.h>
diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c
index b4aca724927..ce0840ccd59 100644
--- a/drivers/media/video/btcx-risc.c
+++ b/drivers/media/video/btcx-risc.c
@@ -23,7 +23,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index 7d47cbe6ad2..7f7e3d3398d 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -104,6 +104,17 @@ static inline void write_lpdata(struct qcam_device *q, int d)
static inline void write_lpcontrol(struct qcam_device *q, int d)
{
+ if (d & 0x20) {
+ /* Set bidirectional mode to reverse (data in) */
+ parport_data_reverse(q->pport);
+ } else {
+ /* Set bidirectional mode to forward (data out) */
+ parport_data_forward(q->pport);
+ }
+
+ /* Now issue the regular port command, but strip out the
+ * direction flag */
+ d &= ~0x20;
parport_write_control(q->pport, d);
}
@@ -344,10 +355,13 @@ static int qc_detect(struct qcam_device *q)
/* Be (even more) liberal in what you accept... */
/* if (count > 30 && count < 200) */
- if (count > 20 && count < 300)
+ if (count > 20 && count < 400) {
return 1; /* found */
- else
+ } else {
+ printk(KERN_ERR "No Quickcam found on port %s\n",
+ q->pport->name);
return 0; /* not found */
+ }
}
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index ef5361824f8..b63cab33692 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/pci.h>
@@ -63,13 +62,13 @@ MODULE_SUPPORTED_DEVICE("Video");
*/
#define MAX_DMA_BUFS 3
-static int alloc_bufs_at_load = 0;
-module_param(alloc_bufs_at_load, bool, 0444);
-MODULE_PARM_DESC(alloc_bufs_at_load,
- "Non-zero value causes DMA buffers to be allocated at module "
- "load time. This increases the chances of successfully getting "
- "those buffers, but at the cost of nailing down the memory from "
- "the outset.");
+static int alloc_bufs_at_read = 0;
+module_param(alloc_bufs_at_read, bool, 0444);
+MODULE_PARM_DESC(alloc_bufs_at_read,
+ "Non-zero value causes DMA buffers to be allocated when the "
+ "video capture device is read, rather than at module load "
+ "time. This saves memory, but decreases the chances of "
+ "successfully getting those buffers.");
static int n_dma_bufs = 3;
module_param(n_dma_bufs, uint, 0644);
@@ -1198,7 +1197,7 @@ static int cafe_setup_siobuf(struct cafe_camera *cam, int index)
buf->v4lbuf.field = V4L2_FIELD_NONE;
buf->v4lbuf.memory = V4L2_MEMORY_MMAP;
/*
- * Offset: must be 32-bit even on a 64-bit system. video-buf
+ * Offset: must be 32-bit even on a 64-bit system. videobuf-dma-sg
* just uses the length times the index, but the spec warns
* against doing just that - vma merging problems. So we
* leave a gap between each pair of buffers.
@@ -1503,7 +1502,7 @@ static int cafe_v4l_release(struct inode *inode, struct file *filp)
}
if (cam->users == 0) {
cafe_ctlr_power_down(cam);
- if (! alloc_bufs_at_load)
+ if (alloc_bufs_at_read)
cafe_free_dma_bufs(cam);
}
mutex_unlock(&cam->s_mutex);
@@ -2162,7 +2161,7 @@ static int cafe_pci_probe(struct pci_dev *pdev,
/*
* If so requested, try to get our DMA buffers now.
*/
- if (alloc_bufs_at_load) {
+ if (!alloc_bufs_at_read) {
if (cafe_alloc_dma_bufs(cam, 1))
cam_warn(cam, "Unable to alloc DMA buffers at load"
" will try again later.");
diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c
index f065ad12cc6..cefd1381e8d 100644
--- a/drivers/media/video/compat_ioctl32.c
+++ b/drivers/media/video/compat_ioctl32.c
@@ -848,6 +848,8 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
case VIDIOCSFREQ32:
case VIDIOCGAUDIO:
case VIDIOCSAUDIO:
+ case VIDIOCGVBIFMT:
+ case VIDIOCSVBIFMT:
#endif
case VIDIOC_QUERYCAP:
case VIDIOC_ENUM_FMT:
@@ -874,7 +876,10 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
case VIDIOC_ENUMINPUT:
case VIDIOC_ENUMINPUT32:
case VIDIOC_G_CTRL:
+ case VIDIOC_S_CTRL:
case VIDIOC_S_CTRL32:
+ case VIDIOC_S_FREQUENCY:
+ case VIDIOC_G_FREQUENCY:
case VIDIOC_QUERYCTRL:
case VIDIOC_G_INPUT32:
case VIDIOC_S_INPUT32:
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index 78c9699eafb..a1d02e5ce0f 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -28,7 +28,6 @@
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/vmalloc.h>
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index 92778cd1d73..e3aaba1e0e0 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -37,7 +37,6 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/init.h>
-#include <linux/moduleparam.h>
#include "cpia2.h"
#include "cpia2dev.h"
diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c
index d73c86aeeaa..62304255dca 100644
--- a/drivers/media/video/cx2341x.c
+++ b/drivers/media/video/cx2341x.c
@@ -20,7 +20,6 @@
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -191,17 +190,21 @@ static int cx2341x_get_ctrl(struct cx2341x_mpeg_params *params,
/* Map the control ID to the correct field in the cx2341x_mpeg_params
struct. Return -EINVAL if the ID is unknown, else return 0. */
-static int cx2341x_set_ctrl(struct cx2341x_mpeg_params *params,
+static int cx2341x_set_ctrl(struct cx2341x_mpeg_params *params, int busy,
struct v4l2_ext_control *ctrl)
{
switch (ctrl->id) {
case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
+ if (busy)
+ return -EBUSY;
params->audio_sampling_freq = ctrl->value;
break;
case V4L2_CID_MPEG_AUDIO_ENCODING:
params->audio_encoding = ctrl->value;
break;
case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
+ if (busy)
+ return -EBUSY;
params->audio_l2_bitrate = ctrl->value;
break;
case V4L2_CID_MPEG_AUDIO_MODE:
@@ -246,6 +249,8 @@ static int cx2341x_set_ctrl(struct cx2341x_mpeg_params *params,
params->video_gop_closure = ctrl->value;
break;
case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
+ if (busy)
+ return -EBUSY;
/* MPEG-1 only allows CBR */
if (params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1 &&
ctrl->value != V4L2_MPEG_VIDEO_BITRATE_MODE_CBR)
@@ -253,9 +258,13 @@ static int cx2341x_set_ctrl(struct cx2341x_mpeg_params *params,
params->video_bitrate_mode = ctrl->value;
break;
case V4L2_CID_MPEG_VIDEO_BITRATE:
+ if (busy)
+ return -EBUSY;
params->video_bitrate = ctrl->value;
break;
case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK:
+ if (busy)
+ return -EBUSY;
params->video_bitrate_peak = ctrl->value;
break;
case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION:
@@ -268,6 +277,8 @@ static int cx2341x_set_ctrl(struct cx2341x_mpeg_params *params,
params->video_mute_yuv = ctrl->value;
break;
case V4L2_CID_MPEG_STREAM_TYPE:
+ if (busy)
+ return -EBUSY;
params->stream_type = ctrl->value;
params->video_encoding =
(params->stream_type == V4L2_MPEG_STREAM_TYPE_MPEG1_SS ||
@@ -632,7 +643,7 @@ static void cx2341x_calc_audio_properties(struct cx2341x_mpeg_params *params)
(params->audio_crc << 14);
}
-int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params,
+int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
struct v4l2_ext_controls *ctrls, unsigned int cmd)
{
int err = 0;
@@ -664,7 +675,7 @@ int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params,
err = v4l2_ctrl_check(ctrl, &qctrl, menu_items);
if (err)
break;
- err = cx2341x_set_ctrl(params, ctrl);
+ err = cx2341x_set_ctrl(params, busy, ctrl);
if (err)
break;
}
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
new file mode 100644
index 00000000000..72004a07b2d
--- /dev/null
+++ b/drivers/media/video/cx23885/Kconfig
@@ -0,0 +1,20 @@
+config VIDEO_CX23885
+ tristate "Conexant cx23885 (2388x successor) support"
+ depends on DVB_CORE && VIDEO_DEV && PCI && I2C
+ select I2C_ALGOBIT
+ select FW_LOADER
+ select VIDEO_BTCX
+ select VIDEO_TUNER
+ select VIDEO_TVEEPROM
+ select VIDEO_IR
+ select VIDEOBUF_DVB
+ select DVB_TUNER_MT2131 if !DVB_FE_CUSTOMISE
+ select DVB_S5H1409 if !DVB_FE_CUSTOMISE
+ select DVB_PLL if !DVB_FE_CUSTOMISE
+ ---help---
+ This is a video4linux driver for Conexant 23885 based
+ TV cards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cx23885
+
diff --git a/drivers/media/video/cx23885/Makefile b/drivers/media/video/cx23885/Makefile
new file mode 100644
index 00000000000..665067022d2
--- /dev/null
+++ b/drivers/media/video/cx23885/Makefile
@@ -0,0 +1,9 @@
+cx23885-objs := cx23885-cards.o cx23885-core.o cx23885-i2c.o cx23885-dvb.o
+
+obj-$(CONFIG_VIDEO_CX23885) += cx23885.o
+
+EXTRA_CFLAGS += -Idrivers/media/video
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+
+EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
new file mode 100644
index 00000000000..b9012acabb2
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -0,0 +1,280 @@
+/*
+ * Driver for the Conexant CX23885 PCIe bridge
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "cx23885.h"
+
+/* ------------------------------------------------------------------ */
+/* board config info */
+
+struct cx23885_board cx23885_boards[] = {
+ [CX23885_BOARD_UNKNOWN] = {
+ .name = "UNKNOWN/GENERIC",
+ .input = {{
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = 0,
+ },{
+ .type = CX23885_VMUX_COMPOSITE2,
+ .vmux = 1,
+ },{
+ .type = CX23885_VMUX_COMPOSITE3,
+ .vmux = 2,
+ },{
+ .type = CX23885_VMUX_COMPOSITE4,
+ .vmux = 3,
+ }},
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
+ .name = "Hauppauge WinTV-HVR1800lp",
+ .portc = CX23885_MPEG_DVB,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0xff00,
+ },{
+ .type = CX23885_VMUX_DEBUG,
+ .vmux = 0,
+ .gpio0 = 0xff01,
+ },{
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0xff02,
+ },{
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0xff02,
+ }},
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1800] = {
+ .name = "Hauppauge WinTV-HVR1800",
+ .portc = CX23885_MPEG_DVB,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0xff00,
+ },{
+ .type = CX23885_VMUX_DEBUG,
+ .vmux = 0,
+ .gpio0 = 0xff01,
+ },{
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0xff02,
+ },{
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0xff02,
+ }},
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1250] = {
+ .name = "Hauppauge WinTV-HVR1250",
+ .portc = CX23885_MPEG_DVB,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0xff00,
+ },{
+ .type = CX23885_VMUX_DEBUG,
+ .vmux = 0,
+ .gpio0 = 0xff01,
+ },{
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0xff02,
+ },{
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0xff02,
+ }},
+ },
+ [CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = {
+ .name = "DViCO FusionHDTV5 Express",
+ .portb = CX23885_MPEG_DVB,
+ },
+};
+const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
+
+/* ------------------------------------------------------------------ */
+/* PCI subsystem IDs */
+
+struct cx23885_subid cx23885_subids[] = {
+ {
+ .subvendor = 0x0070,
+ .subdevice = 0x3400,
+ .card = CX23885_BOARD_UNKNOWN,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7600,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7800,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1800,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7801,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1800,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7911,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1250,
+ },{
+ .subvendor = 0x18ac,
+ .subdevice = 0xd500,
+ .card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
+ },
+};
+const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
+
+void cx23885_card_list(struct cx23885_dev *dev)
+{
+ int i;
+
+ if (0 == dev->pci->subsystem_vendor &&
+ 0 == dev->pci->subsystem_device) {
+ printk("%s: Your board has no valid PCIe Subsystem ID and thus can't\n"
+ "%s: be autodetected. Please pass card=<n> insmod option to\n"
+ "%s: workaround that. Redirect complaints to the vendor of\n"
+ "%s: the TV card. Best regards,\n"
+ "%s: -- tux\n",
+ dev->name, dev->name, dev->name, dev->name, dev->name);
+ } else {
+ printk("%s: Your board isn't known (yet) to the driver. You can\n"
+ "%s: try to pick one of the existing card configs via\n"
+ "%s: card=<n> insmod option. Updating to the latest\n"
+ "%s: version might help as well.\n",
+ dev->name, dev->name, dev->name, dev->name);
+ }
+ printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
+ dev->name);
+ for (i = 0; i < cx23885_bcount; i++)
+ printk("%s: card=%d -> %s\n",
+ dev->name, i, cx23885_boards[i].name);
+}
+
+static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
+{
+ struct tveeprom tv;
+
+ tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, eeprom_data);
+
+ /* Make sure we support the board model */
+ switch (tv.model)
+ {
+ case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */
+ case 77001: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
+ case 78501: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */
+ case 78521: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */
+ break;
+ default:
+ printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model);
+ break;
+ }
+
+ printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
+ dev->name, tv.model);
+}
+
+void cx23885_gpio_setup(struct cx23885_dev *dev)
+{
+ switch(dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ /* GPIO-0 cx24227 demodulator reset */
+ cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ /* GPIO-0 656_CLK */
+ /* GPIO-1 656_D0 */
+ /* GPIO-2 8295A Reset */
+ /* GPIO-3-10 cx23417 data0-7 */
+ /* GPIO-11-14 cx23417 addr0-3 */
+ /* GPIO-15-18 cx23417 READY, CS, RD, WR */
+ /* GPIO-19 IR_RX */
+ // FIXME: Analog requires the tuner is brought out of reset
+ break;
+ }
+}
+
+int cx23885_ir_init(struct cx23885_dev *dev)
+{
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ /* FIXME: Implement me */
+ break;
+ }
+
+ return 0;
+}
+
+void cx23885_card_setup(struct cx23885_dev *dev)
+{
+ struct cx23885_tsport *ts1 = &dev->ts1;
+ struct cx23885_tsport *ts2 = &dev->ts2;
+
+ static u8 eeprom[256];
+
+ if (dev->i2c_bus[0].i2c_rc == 0) {
+ dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+ tveeprom_read(&dev->i2c_bus[0].i2c_client,
+ eeprom, sizeof(eeprom));
+ }
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+ if (dev->i2c_bus[0].i2c_rc == 0)
+ hauppauge_eeprom(dev, eeprom+0x80);
+ break;
+ }
+
+ switch (dev->board) {
+ case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
+ ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+ default:
+ ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ }
+
+}
+
+/* ------------------------------------------------------------------ */
+
+EXPORT_SYMBOL(cx23885_boards);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
+ */
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
new file mode 100644
index 00000000000..af16505bd2e
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -0,0 +1,1530 @@
+/*
+ * Driver for the Conexant CX23885 PCIe bridge
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+
+#include "cx23885.h"
+
+MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
+MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_LICENSE("GPL");
+
+static unsigned int debug = 0;
+module_param(debug,int,0644);
+MODULE_PARM_DESC(debug,"enable debug messages");
+
+static unsigned int card[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET };
+module_param_array(card, int, NULL, 0444);
+MODULE_PARM_DESC(card,"card type");
+
+#define dprintk(level,fmt, arg...) if (debug >= level) \
+ printk(KERN_DEBUG "%s/0: " fmt, dev->name , ## arg)
+
+static unsigned int cx23885_devcount;
+
+static DEFINE_MUTEX(devlist);
+static LIST_HEAD(cx23885_devlist);
+
+#define NO_SYNC_LINE (-1U)
+
+/*
+ * CX23885 Assumptions
+ * 1 line = 16 bytes of CDT
+ * cmds size = 80
+ * cdt size = 16 * linesize
+ * iqsize = 64
+ * maxlines = 6
+ *
+ * Address Space:
+ * 0x00000000 0x00008fff FIFO clusters
+ * 0x00010000 0x000104af Channel Management Data Structures
+ * 0x000104b0 0x000104ff Free
+ * 0x00010500 0x000108bf 15 channels * iqsize
+ * 0x000108c0 0x000108ff Free
+ * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables
+ * 15 channels * (iqsize + (maxlines * linesize))
+ * 0x00010ea0 0x00010xxx Free
+ */
+
+struct sram_channel cx23885_sram_channels[] = {
+ [SRAM_CH01] = {
+ .name = "test ch1",
+ .cmds_start = 0x10000,
+ .ctrl_start = 0x10500,
+ .cdt = 0x10900,
+ .fifo_start = 0x3000,
+ .fifo_size = 0x1000,
+ .ptr1_reg = DMA1_PTR1,
+ .ptr2_reg = DMA1_PTR2,
+ .cnt1_reg = DMA1_CNT1,
+ .cnt2_reg = DMA1_CNT2,
+ .jumponly = 1,
+ },
+ [SRAM_CH02] = {
+ .name = "ch2",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA2_PTR1,
+ .ptr2_reg = DMA2_PTR2,
+ .cnt1_reg = DMA2_CNT1,
+ .cnt2_reg = DMA2_CNT2,
+ },
+ [SRAM_CH03] = {
+ .name = "TS1 B",
+ .cmds_start = 0x100A0,
+ .ctrl_start = 0x10780,
+ .cdt = 0x10400,
+ .fifo_start = 0x5000,
+ .fifo_size = 0x1000,
+ .ptr1_reg = DMA3_PTR1,
+ .ptr2_reg = DMA3_PTR2,
+ .cnt1_reg = DMA3_CNT1,
+ .cnt2_reg = DMA3_CNT2,
+ },
+ [SRAM_CH04] = {
+ .name = "ch4",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA4_PTR1,
+ .ptr2_reg = DMA4_PTR2,
+ .cnt1_reg = DMA4_CNT1,
+ .cnt2_reg = DMA4_CNT2,
+ },
+ [SRAM_CH05] = {
+ .name = "ch5",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA5_PTR1,
+ .ptr2_reg = DMA5_PTR2,
+ .cnt1_reg = DMA5_CNT1,
+ .cnt2_reg = DMA5_CNT2,
+ },
+ [SRAM_CH06] = {
+ .name = "TS2 C",
+ .cmds_start = 0x10140,
+ .ctrl_start = 0x10680,
+ .cdt = 0x10480,
+ .fifo_start = 0x6000,
+ .fifo_size = 0x1000,
+ .ptr1_reg = DMA5_PTR1,
+ .ptr2_reg = DMA5_PTR2,
+ .cnt1_reg = DMA5_CNT1,
+ .cnt2_reg = DMA5_CNT2,
+ },
+ [SRAM_CH07] = {
+ .name = "ch7",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA6_PTR1,
+ .ptr2_reg = DMA6_PTR2,
+ .cnt1_reg = DMA6_CNT1,
+ .cnt2_reg = DMA6_CNT2,
+ },
+ [SRAM_CH08] = {
+ .name = "ch8",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA7_PTR1,
+ .ptr2_reg = DMA7_PTR2,
+ .cnt1_reg = DMA7_CNT1,
+ .cnt2_reg = DMA7_CNT2,
+ },
+ [SRAM_CH09] = {
+ .name = "ch9",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA8_PTR1,
+ .ptr2_reg = DMA8_PTR2,
+ .cnt1_reg = DMA8_CNT1,
+ .cnt2_reg = DMA8_CNT2,
+ },
+};
+
+/* FIXME, these allocations will change when
+ * analog arrives. The be reviewed.
+ * CX23887 Assumptions
+ * 1 line = 16 bytes of CDT
+ * cmds size = 80
+ * cdt size = 16 * linesize
+ * iqsize = 64
+ * maxlines = 6
+ *
+ * Address Space:
+ * 0x00000000 0x00008fff FIFO clusters
+ * 0x00010000 0x000104af Channel Management Data Structures
+ * 0x000104b0 0x000104ff Free
+ * 0x00010500 0x000108bf 15 channels * iqsize
+ * 0x000108c0 0x000108ff Free
+ * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables
+ * 15 channels * (iqsize + (maxlines * linesize))
+ * 0x00010ea0 0x00010xxx Free
+ */
+
+struct sram_channel cx23887_sram_channels[] = {
+ [SRAM_CH01] = {
+ .name = "test ch1",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA1_PTR1,
+ .ptr2_reg = DMA1_PTR2,
+ .cnt1_reg = DMA1_CNT1,
+ .cnt2_reg = DMA1_CNT2,
+ },
+ [SRAM_CH02] = {
+ .name = "ch2",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA2_PTR1,
+ .ptr2_reg = DMA2_PTR2,
+ .cnt1_reg = DMA2_CNT1,
+ .cnt2_reg = DMA2_CNT2,
+ },
+ [SRAM_CH03] = {
+ .name = "ch3",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA3_PTR1,
+ .ptr2_reg = DMA3_PTR2,
+ .cnt1_reg = DMA3_CNT1,
+ .cnt2_reg = DMA3_CNT2,
+ },
+ [SRAM_CH04] = {
+ .name = "ch4",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA4_PTR1,
+ .ptr2_reg = DMA4_PTR2,
+ .cnt1_reg = DMA4_CNT1,
+ .cnt2_reg = DMA4_CNT2,
+ },
+ [SRAM_CH05] = {
+ .name = "ch5",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA5_PTR1,
+ .ptr2_reg = DMA5_PTR2,
+ .cnt1_reg = DMA5_CNT1,
+ .cnt2_reg = DMA5_CNT2,
+ },
+ [SRAM_CH06] = {
+ .name = "TS2 C",
+ .cmds_start = 0x10140,
+ .ctrl_start = 0x10680,
+ .cdt = 0x108d0,
+ .fifo_start = 0x6000,
+ .fifo_size = 0x1000,
+ .ptr1_reg = DMA5_PTR1,
+ .ptr2_reg = DMA5_PTR2,
+ .cnt1_reg = DMA5_CNT1,
+ .cnt2_reg = DMA5_CNT2,
+ },
+ [SRAM_CH07] = {
+ .name = "ch7",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA6_PTR1,
+ .ptr2_reg = DMA6_PTR2,
+ .cnt1_reg = DMA6_CNT1,
+ .cnt2_reg = DMA6_CNT2,
+ },
+ [SRAM_CH08] = {
+ .name = "ch8",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA7_PTR1,
+ .ptr2_reg = DMA7_PTR2,
+ .cnt1_reg = DMA7_CNT1,
+ .cnt2_reg = DMA7_CNT2,
+ },
+ [SRAM_CH09] = {
+ .name = "ch9",
+ .cmds_start = 0x0,
+ .ctrl_start = 0x0,
+ .cdt = 0x0,
+ .fifo_start = 0x0,
+ .fifo_size = 0x0,
+ .ptr1_reg = DMA8_PTR1,
+ .ptr2_reg = DMA8_PTR2,
+ .cnt1_reg = DMA8_CNT1,
+ .cnt2_reg = DMA8_CNT2,
+ },
+};
+
+static int cx23885_risc_decode(u32 risc)
+{
+ static char *instr[16] = {
+ [ RISC_SYNC >> 28 ] = "sync",
+ [ RISC_WRITE >> 28 ] = "write",
+ [ RISC_WRITEC >> 28 ] = "writec",
+ [ RISC_READ >> 28 ] = "read",
+ [ RISC_READC >> 28 ] = "readc",
+ [ RISC_JUMP >> 28 ] = "jump",
+ [ RISC_SKIP >> 28 ] = "skip",
+ [ RISC_WRITERM >> 28 ] = "writerm",
+ [ RISC_WRITECM >> 28 ] = "writecm",
+ [ RISC_WRITECR >> 28 ] = "writecr",
+ };
+ static int incr[16] = {
+ [ RISC_WRITE >> 28 ] = 3,
+ [ RISC_JUMP >> 28 ] = 3,
+ [ RISC_SKIP >> 28 ] = 1,
+ [ RISC_SYNC >> 28 ] = 1,
+ [ RISC_WRITERM >> 28 ] = 3,
+ [ RISC_WRITECM >> 28 ] = 3,
+ [ RISC_WRITECR >> 28 ] = 4,
+ };
+ static char *bits[] = {
+ "12", "13", "14", "resync",
+ "cnt0", "cnt1", "18", "19",
+ "20", "21", "22", "23",
+ "irq1", "irq2", "eol", "sol",
+ };
+ int i;
+
+ printk("0x%08x [ %s", risc,
+ instr[risc >> 28] ? instr[risc >> 28] : "INVALID");
+ for (i = ARRAY_SIZE(bits) - 1; i >= 0; i--)
+ if (risc & (1 << (i + 12)))
+ printk(" %s", bits[i]);
+ printk(" count=%d ]\n", risc & 0xfff);
+ return incr[risc >> 28] ? incr[risc >> 28] : 1;
+}
+
+void cx23885_wakeup(struct cx23885_tsport *port,
+ struct cx23885_dmaqueue *q, u32 count)
+{
+ struct cx23885_dev *dev = port->dev;
+ struct cx23885_buffer *buf;
+ int bc;
+
+ for (bc = 0;; bc++) {
+ if (list_empty(&q->active))
+ break;
+ buf = list_entry(q->active.next,
+ struct cx23885_buffer, vb.queue);
+
+ /* count comes from the hw and is is 16bit wide --
+ * this trick handles wrap-arounds correctly for
+ * up to 32767 buffers in flight... */
+ if ((s16) (count - buf->count) < 0)
+ break;
+
+ do_gettimeofday(&buf->vb.ts);
+ dprintk(2, "[%p/%d] wakeup reg=%d buf=%d\n", buf, buf->vb.i,
+ count, buf->count);
+ buf->vb.state = STATE_DONE;
+ list_del(&buf->vb.queue);
+ wake_up(&buf->vb.done);
+ }
+ if (list_empty(&q->active)) {
+ del_timer(&q->timeout);
+ } else {
+ mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
+ }
+ if (bc != 1)
+ printk("%s: %d buffers handled (should be 1)\n",
+ __FUNCTION__, bc);
+}
+void cx23885_sram_channel_dump(struct cx23885_dev *dev,
+ struct sram_channel *ch);
+
+int cx23885_sram_channel_setup(struct cx23885_dev *dev,
+ struct sram_channel *ch,
+ unsigned int bpl, u32 risc)
+{
+ unsigned int i, lines;
+ u32 cdt;
+
+ if (ch->cmds_start == 0)
+ {
+ dprintk(1, "%s() Erasing channel [%s]\n", __FUNCTION__,
+ ch->name);
+ cx_write(ch->ptr1_reg, 0);
+ cx_write(ch->ptr2_reg, 0);
+ cx_write(ch->cnt2_reg, 0);
+ cx_write(ch->cnt1_reg, 0);
+ return 0;
+ } else {
+ dprintk(1, "%s() Configuring channel [%s]\n", __FUNCTION__,
+ ch->name);
+ }
+
+ bpl = (bpl + 7) & ~7; /* alignment */
+ cdt = ch->cdt;
+ lines = ch->fifo_size / bpl;
+ if (lines > 6)
+ lines = 6;
+ BUG_ON(lines < 2);
+
+ cx_write(8 + 0, cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC) );
+ cx_write(8 + 4, cpu_to_le32(8) );
+ cx_write(8 + 8, cpu_to_le32(0) );
+
+ /* write CDT */
+ for (i = 0; i < lines; i++) {
+ dprintk(2, "%s() 0x%08x <- 0x%08x\n", __FUNCTION__, cdt + 16*i,
+ ch->fifo_start + bpl*i);
+ cx_write(cdt + 16*i, ch->fifo_start + bpl*i);
+ cx_write(cdt + 16*i + 4, 0);
+ cx_write(cdt + 16*i + 8, 0);
+ cx_write(cdt + 16*i + 12, 0);
+ }
+
+ /* write CMDS */
+ if (ch->jumponly)
+ cx_write(ch->cmds_start + 0, 8);
+ else
+ cx_write(ch->cmds_start + 0, risc);
+ cx_write(ch->cmds_start + 4, 0); /* 64 bits 63-32 */
+ cx_write(ch->cmds_start + 8, cdt);
+ cx_write(ch->cmds_start + 12, (lines*16) >> 3);
+ cx_write(ch->cmds_start + 16, ch->ctrl_start);
+ if (ch->jumponly)
+ cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2) );
+ else
+ cx_write(ch->cmds_start + 20, 64 >> 2);
+ for (i = 24; i < 80; i += 4)
+ cx_write(ch->cmds_start + i, 0);
+
+ /* fill registers */
+ cx_write(ch->ptr1_reg, ch->fifo_start);
+ cx_write(ch->ptr2_reg, cdt);
+ cx_write(ch->cnt2_reg, (lines*16) >> 3);
+ cx_write(ch->cnt1_reg, (bpl >> 3) -1);
+
+ dprintk(2,"[bridge %d] sram setup %s: bpl=%d lines=%d\n",
+ dev->bridge,
+ ch->name,
+ bpl,
+ lines);
+
+ return 0;
+}
+
+void cx23885_sram_channel_dump(struct cx23885_dev *dev,
+ struct sram_channel *ch)
+{
+ static char *name[] = {
+ "init risc lo",
+ "init risc hi",
+ "cdt base",
+ "cdt size",
+ "iq base",
+ "iq size",
+ "risc pc lo",
+ "risc pc hi",
+ "iq wr ptr",
+ "iq rd ptr",
+ "cdt current",
+ "pci target lo",
+ "pci target hi",
+ "line / byte",
+ };
+ u32 risc;
+ unsigned int i, j, n;
+
+ printk("%s: %s - dma channel status dump\n",
+ dev->name, ch->name);
+ for (i = 0; i < ARRAY_SIZE(name); i++)
+ printk("%s: cmds: %-15s: 0x%08x\n",
+ dev->name, name[i],
+ cx_read(ch->cmds_start + 4*i));
+
+ for (i = 0; i < 4; i++) {
+ risc = cx_read(ch->cmds_start + 4 * (i + 14));
+ printk("%s: risc%d: ", dev->name, i);
+ cx23885_risc_decode(risc);
+ }
+ for (i = 0; i < (64 >> 2); i += n) {
+ risc = cx_read(ch->ctrl_start + 4 * i);
+ /* No consideration for bits 63-32 */
+
+ printk("%s: (0x%08x) iq %x: ", dev->name,
+ ch->ctrl_start + 4 * i, i);
+ n = cx23885_risc_decode(risc);
+ for (j = 1; j < n; j++) {
+ risc = cx_read(ch->ctrl_start + 4 * (i + j));
+ printk("%s: iq %x: 0x%08x [ arg #%d ]\n",
+ dev->name, i+j, risc, j);
+ }
+ }
+
+ printk("%s: fifo: 0x%08x -> 0x%x\n",
+ dev->name, ch->fifo_start, ch->fifo_start+ch->fifo_size);
+ printk("%s: ctrl: 0x%08x -> 0x%x\n",
+ dev->name, ch->ctrl_start, ch->ctrl_start + 6*16);
+ printk("%s: ptr1_reg: 0x%08x\n",
+ dev->name, cx_read(ch->ptr1_reg));
+ printk("%s: ptr2_reg: 0x%08x\n",
+ dev->name, cx_read(ch->ptr2_reg));
+ printk("%s: cnt1_reg: 0x%08x\n",
+ dev->name, cx_read(ch->cnt1_reg));
+ printk("%s: cnt2_reg: 0x%08x\n",
+ dev->name, cx_read(ch->cnt2_reg));
+}
+
+void cx23885_risc_disasm(struct cx23885_tsport *port,
+ struct btcx_riscmem *risc)
+{
+ struct cx23885_dev *dev = port->dev;
+ unsigned int i, j, n;
+
+ printk("%s: risc disasm: %p [dma=0x%08lx]\n",
+ dev->name, risc->cpu, (unsigned long)risc->dma);
+ for (i = 0; i < (risc->size >> 2); i += n) {
+ printk("%s: %04d: ", dev->name, i);
+ n = cx23885_risc_decode(risc->cpu[i]);
+ for (j = 1; j < n; j++)
+ printk("%s: %04d: 0x%08x [ arg #%d ]\n",
+ dev->name, i + j, risc->cpu[i + j], j);
+ if (risc->cpu[i] == RISC_JUMP)
+ break;
+ }
+}
+
+void cx23885_shutdown(struct cx23885_dev *dev)
+{
+ /* disable RISC controller */
+ cx_write(DEV_CNTRL2, 0);
+
+ /* Disable all IR activity */
+ cx_write(IR_CNTRL_REG, 0);
+
+ /* Disable Video A/B activity */
+ cx_write(VID_A_DMA_CTL, 0);
+ cx_write(VID_B_DMA_CTL, 0);
+ cx_write(VID_C_DMA_CTL, 0);
+
+ /* Disable Audio activity */
+ cx_write(AUD_INT_DMA_CTL, 0);
+ cx_write(AUD_EXT_DMA_CTL, 0);
+
+ /* Disable Serial port */
+ cx_write(UART_CTL, 0);
+
+ /* Disable Interrupts */
+ cx_write(PCI_INT_MSK, 0);
+ cx_write(VID_A_INT_MSK, 0);
+ cx_write(VID_B_INT_MSK, 0);
+ cx_write(VID_C_INT_MSK, 0);
+ cx_write(AUDIO_INT_INT_MSK, 0);
+ cx_write(AUDIO_EXT_INT_MSK, 0);
+
+}
+
+void cx23885_reset(struct cx23885_dev *dev)
+{
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ cx23885_shutdown(dev);
+
+ cx_write(PCI_INT_STAT, 0xffffffff);
+ cx_write(VID_A_INT_STAT, 0xffffffff);
+ cx_write(VID_B_INT_STAT, 0xffffffff);
+ cx_write(VID_C_INT_STAT, 0xffffffff);
+ cx_write(AUDIO_INT_INT_STAT, 0xffffffff);
+ cx_write(AUDIO_EXT_INT_STAT, 0xffffffff);
+ cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000);
+
+ mdelay(100);
+
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH01 ], 188*4, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH02 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH03 ], 188*4, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH04 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH05 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH06 ], 188*4, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH07 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH08 ], 128, 0);
+ cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH09 ], 128, 0);
+
+ cx23885_gpio_setup(dev);
+}
+
+
+static int cx23885_pci_quirks(struct cx23885_dev *dev)
+{
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ /* The cx23885 bridge has a weird bug which causes NMI to be asserted
+ * when DMA begins if RDR_TLCTL0 bit4 is not cleared. It does not
+ * occur on the cx23887 bridge.
+ */
+ if(dev->bridge == CX23885_BRIDGE_885)
+ cx_clear(RDR_TLCTL0, 1 << 4);
+
+ return 0;
+}
+
+static int get_resources(struct cx23885_dev *dev)
+{
+ if (request_mem_region(pci_resource_start(dev->pci,0),
+ pci_resource_len(dev->pci,0),
+ dev->name))
+ return 0;
+
+ printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n",
+ dev->name, (unsigned long long)pci_resource_start(dev->pci,0));
+
+ return -EBUSY;
+}
+
+static void cx23885_timeout(unsigned long data);
+int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
+ u32 reg, u32 mask, u32 value);
+
+static int cx23885_init_tsport(struct cx23885_dev *dev, struct cx23885_tsport *port, int portno)
+{
+ dprintk(1, "%s(portno=%d)\n", __FUNCTION__, portno);
+
+ /* Transport bus init dma queue - Common settings */
+ port->dma_ctl_val = 0x11; /* Enable RISC controller and Fifo */
+ port->ts_int_msk_val = 0x1111; /* TS port bits for RISC */
+
+ spin_lock_init(&port->slock);
+ port->dev = dev;
+ port->nr = portno;
+
+ INIT_LIST_HEAD(&port->mpegq.active);
+ INIT_LIST_HEAD(&port->mpegq.queued);
+ port->mpegq.timeout.function = cx23885_timeout;
+ port->mpegq.timeout.data = (unsigned long)port;
+ init_timer(&port->mpegq.timeout);
+
+ switch(portno) {
+ case 1:
+ port->reg_gpcnt = VID_B_GPCNT;
+ port->reg_gpcnt_ctl = VID_B_GPCNT_CTL;
+ port->reg_dma_ctl = VID_B_DMA_CTL;
+ port->reg_lngth = VID_B_LNGTH;
+ port->reg_hw_sop_ctrl = VID_B_HW_SOP_CTL;
+ port->reg_gen_ctrl = VID_B_GEN_CTL;
+ port->reg_bd_pkt_status = VID_B_BD_PKT_STATUS;
+ port->reg_sop_status = VID_B_SOP_STATUS;
+ port->reg_fifo_ovfl_stat = VID_B_FIFO_OVFL_STAT;
+ port->reg_vld_misc = VID_B_VLD_MISC;
+ port->reg_ts_clk_en = VID_B_TS_CLK_EN;
+ port->reg_src_sel = VID_B_SRC_SEL;
+ port->reg_ts_int_msk = VID_B_INT_MSK;
+ port->reg_ts_int_stat = VID_B_INT_STAT;
+ port->sram_chno = SRAM_CH03; /* VID_B */
+ port->pci_irqmask = 0x02; /* VID_B bit1 */
+ break;
+ case 2:
+ port->reg_gpcnt = VID_C_GPCNT;
+ port->reg_gpcnt_ctl = VID_C_GPCNT_CTL;
+ port->reg_dma_ctl = VID_C_DMA_CTL;
+ port->reg_lngth = VID_C_LNGTH;
+ port->reg_hw_sop_ctrl = VID_C_HW_SOP_CTL;
+ port->reg_gen_ctrl = VID_C_GEN_CTL;
+ port->reg_bd_pkt_status = VID_C_BD_PKT_STATUS;
+ port->reg_sop_status = VID_C_SOP_STATUS;
+ port->reg_fifo_ovfl_stat = VID_C_FIFO_OVFL_STAT;
+ port->reg_vld_misc = VID_C_VLD_MISC;
+ port->reg_ts_clk_en = VID_C_TS_CLK_EN;
+ port->reg_src_sel = 0;
+ port->reg_ts_int_msk = VID_C_INT_MSK;
+ port->reg_ts_int_stat = VID_C_INT_STAT;
+ port->sram_chno = SRAM_CH06; /* VID_C */
+ port->pci_irqmask = 0x04; /* VID_C bit2 */
+ break;
+ default:
+ BUG();
+ }
+
+ cx23885_risc_stopper(dev->pci, &port->mpegq.stopper,
+ port->reg_dma_ctl, port->dma_ctl_val, 0x00);
+
+ return 0;
+}
+
+static int cx23885_dev_setup(struct cx23885_dev *dev)
+{
+ int i;
+
+ mutex_init(&dev->lock);
+
+ atomic_inc(&dev->refcount);
+
+ dev->nr = cx23885_devcount++;
+ sprintf(dev->name, "cx23885[%d]", dev->nr);
+
+ mutex_lock(&devlist);
+ list_add_tail(&dev->devlist, &cx23885_devlist);
+ mutex_unlock(&devlist);
+
+ /* Configure the internal memory */
+ if(dev->pci->device == 0x8880) {
+ dev->bridge = CX23885_BRIDGE_887;
+ dev->sram_channels = cx23887_sram_channels;
+ } else
+ if(dev->pci->device == 0x8852) {
+ dev->bridge = CX23885_BRIDGE_885;
+ dev->sram_channels = cx23885_sram_channels;
+ } else
+ BUG();
+
+ dprintk(1, "%s() Memory configured for PCIe bridge type %d\n",
+ __FUNCTION__, dev->bridge);
+
+ /* board config */
+ dev->board = UNSET;
+ if (card[dev->nr] < cx23885_bcount)
+ dev->board = card[dev->nr];
+ for (i = 0; UNSET == dev->board && i < cx23885_idcount; i++)
+ if (dev->pci->subsystem_vendor == cx23885_subids[i].subvendor &&
+ dev->pci->subsystem_device == cx23885_subids[i].subdevice)
+ dev->board = cx23885_subids[i].card;
+ if (UNSET == dev->board) {
+ dev->board = CX23885_BOARD_UNKNOWN;
+ cx23885_card_list(dev);
+ }
+
+ dev->pci_bus = dev->pci->bus->number;
+ dev->pci_slot = PCI_SLOT(dev->pci->devfn);
+ dev->pci_irqmask = 0x001f00;
+
+ /* External Master 1 Bus */
+ dev->i2c_bus[0].nr = 0;
+ dev->i2c_bus[0].dev = dev;
+ dev->i2c_bus[0].reg_stat = I2C1_STAT;
+ dev->i2c_bus[0].reg_ctrl = I2C1_CTRL;
+ dev->i2c_bus[0].reg_addr = I2C1_ADDR;
+ dev->i2c_bus[0].reg_rdata = I2C1_RDATA;
+ dev->i2c_bus[0].reg_wdata = I2C1_WDATA;
+ dev->i2c_bus[0].i2c_period = (0x9d << 24); /* 100kHz */
+
+ /* External Master 2 Bus */
+ dev->i2c_bus[1].nr = 1;
+ dev->i2c_bus[1].dev = dev;
+ dev->i2c_bus[1].reg_stat = I2C2_STAT;
+ dev->i2c_bus[1].reg_ctrl = I2C2_CTRL;
+ dev->i2c_bus[1].reg_addr = I2C2_ADDR;
+ dev->i2c_bus[1].reg_rdata = I2C2_RDATA;
+ dev->i2c_bus[1].reg_wdata = I2C2_WDATA;
+ dev->i2c_bus[1].i2c_period = (0x9d << 24); /* 100kHz */
+
+ /* Internal Master 3 Bus */
+ dev->i2c_bus[2].nr = 2;
+ dev->i2c_bus[2].dev = dev;
+ dev->i2c_bus[2].reg_stat = I2C3_STAT;
+ dev->i2c_bus[2].reg_ctrl = I2C3_CTRL;
+ dev->i2c_bus[2].reg_addr = I2C3_ADDR;
+ dev->i2c_bus[2].reg_rdata = I2C3_RDATA;
+ dev->i2c_bus[2].reg_wdata = I2C3_WDATA;
+ dev->i2c_bus[2].i2c_period = (0x07 << 24); /* 1.95MHz */
+
+ if(cx23885_boards[dev->board].portb == CX23885_MPEG_DVB)
+ cx23885_init_tsport(dev, &dev->ts1, 1);
+
+ if(cx23885_boards[dev->board].portc == CX23885_MPEG_DVB)
+ cx23885_init_tsport(dev, &dev->ts2, 2);
+
+ if (get_resources(dev) < 0) {
+ printk(KERN_ERR "CORE %s No more PCIe resources for "
+ "subsystem: %04x:%04x\n",
+ dev->name, dev->pci->subsystem_vendor,
+ dev->pci->subsystem_device);
+
+ cx23885_devcount--;
+ goto fail_free;
+ }
+
+ /* PCIe stuff */
+ dev->lmmio = ioremap(pci_resource_start(dev->pci,0),
+ pci_resource_len(dev->pci,0));
+
+ dev->bmmio = (u8 __iomem *)dev->lmmio;
+
+ printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+ dev->name, dev->pci->subsystem_vendor,
+ dev->pci->subsystem_device, cx23885_boards[dev->board].name,
+ dev->board, card[dev->nr] == dev->board ?
+ "insmod option" : "autodetected");
+
+ cx23885_pci_quirks(dev);
+
+ /* init hardware */
+ cx23885_reset(dev);
+
+ cx23885_i2c_register(&dev->i2c_bus[0]);
+ cx23885_i2c_register(&dev->i2c_bus[1]);
+ cx23885_i2c_register(&dev->i2c_bus[2]);
+ cx23885_call_i2c_clients (&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL);
+ cx23885_card_setup(dev);
+ cx23885_ir_init(dev);
+
+ if(cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) {
+ if (cx23885_dvb_register(&dev->ts1) < 0) {
+ printk(KERN_ERR "%s() Failed to register dvb adapters on VID_B\n",
+ __FUNCTION__);
+ }
+ }
+
+ if(cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) {
+ if (cx23885_dvb_register(&dev->ts2) < 0) {
+ printk(KERN_ERR "%s() Failed to register dvb adapters on VID_C\n",
+ __FUNCTION__);
+ }
+ }
+
+ return 0;
+
+fail_free:
+ kfree(dev);
+ return -ENODEV;
+}
+
+void cx23885_dev_unregister(struct cx23885_dev *dev)
+{
+ release_mem_region(pci_resource_start(dev->pci,0),
+ pci_resource_len(dev->pci,0));
+
+ if (!atomic_dec_and_test(&dev->refcount))
+ return;
+
+ if(cx23885_boards[dev->board].portb == CX23885_MPEG_DVB)
+ cx23885_dvb_unregister(&dev->ts1);
+
+ if(cx23885_boards[dev->board].portc == CX23885_MPEG_DVB)
+ cx23885_dvb_unregister(&dev->ts2);
+
+ cx23885_i2c_unregister(&dev->i2c_bus[2]);
+ cx23885_i2c_unregister(&dev->i2c_bus[1]);
+ cx23885_i2c_unregister(&dev->i2c_bus[0]);
+
+ iounmap(dev->lmmio);
+}
+
+static u32* cx23885_risc_field(u32 *rp, struct scatterlist *sglist,
+ unsigned int offset, u32 sync_line,
+ unsigned int bpl, unsigned int padding,
+ unsigned int lines)
+{
+ struct scatterlist *sg;
+ unsigned int line, todo;
+
+ /* sync instruction */
+ if (sync_line != NO_SYNC_LINE)
+ *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line);
+
+ /* scan lines */
+ sg = sglist;
+ for (line = 0; line < lines; line++) {
+ while (offset && offset >= sg_dma_len(sg)) {
+ offset -= sg_dma_len(sg);
+ sg++;
+ }
+ if (bpl <= sg_dma_len(sg)-offset) {
+ /* fits into current chunk */
+ *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL|RISC_EOL|bpl);
+ *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset);
+ *(rp++)=cpu_to_le32(0); /* bits 63-32 */
+ offset+=bpl;
+ } else {
+ /* scanline needs to be split */
+ todo = bpl;
+ *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL|
+ (sg_dma_len(sg)-offset));
+ *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset);
+ *(rp++)=cpu_to_le32(0); /* bits 63-32 */
+ todo -= (sg_dma_len(sg)-offset);
+ offset = 0;
+ sg++;
+ while (todo > sg_dma_len(sg)) {
+ *(rp++)=cpu_to_le32(RISC_WRITE|
+ sg_dma_len(sg));
+ *(rp++)=cpu_to_le32(sg_dma_address(sg));
+ *(rp++)=cpu_to_le32(0); /* bits 63-32 */
+ todo -= sg_dma_len(sg);
+ sg++;
+ }
+ *(rp++)=cpu_to_le32(RISC_WRITE|RISC_EOL|todo);
+ *(rp++)=cpu_to_le32(sg_dma_address(sg));
+ *(rp++)=cpu_to_le32(0); /* bits 63-32 */
+ offset += todo;
+ }
+ offset += padding;
+ }
+
+ return rp;
+}
+
+int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc,
+ struct scatterlist *sglist, unsigned int top_offset,
+ unsigned int bottom_offset, unsigned int bpl,
+ unsigned int padding, unsigned int lines)
+{
+ u32 instructions, fields;
+ u32 *rp;
+ int rc;
+
+ fields = 0;
+ if (UNSET != top_offset)
+ fields++;
+ if (UNSET != bottom_offset)
+ fields++;
+
+ /* estimate risc mem: worst case is one write per page border +
+ one write per scan line + syncs + jump (all 2 dwords). Padding
+ can cause next bpl to start close to a page border. First DMA
+ region may be smaller than PAGE_SIZE */
+ /* write and jump need and extra dword */
+ instructions = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + lines);
+ instructions += 2;
+ if ((rc = btcx_riscmem_alloc(pci,risc,instructions*12)) < 0)
+ return rc;
+
+ /* write risc instructions */
+ rp = risc->cpu;
+ if (UNSET != top_offset)
+ rp = cx23885_risc_field(rp, sglist, top_offset, 0,
+ bpl, padding, lines);
+ if (UNSET != bottom_offset)
+ rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x200,
+ bpl, padding, lines);
+
+ /* save pointer to jmp instruction address */
+ risc->jmp = rp;
+ BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size);
+ return 0;
+}
+
+int cx23885_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc,
+ struct scatterlist *sglist, unsigned int bpl,
+ unsigned int lines)
+{
+ u32 instructions;
+ u32 *rp;
+ int rc;
+
+ /* estimate risc mem: worst case is one write per page border +
+ one write per scan line + syncs + jump (all 2 dwords). Here
+ there is no padding and no sync. First DMA region may be smaller
+ than PAGE_SIZE */
+ /* Jump and write need an extra dword */
+ instructions = 1 + (bpl * lines) / PAGE_SIZE + lines;
+ instructions += 1;
+
+ if ((rc = btcx_riscmem_alloc(pci,risc,instructions*12)) < 0)
+ return rc;
+
+ /* write risc instructions */
+ rp = risc->cpu;
+ rp = cx23885_risc_field(rp, sglist, 0, NO_SYNC_LINE, bpl, 0, lines);
+
+ /* save pointer to jmp instruction address */
+ risc->jmp = rp;
+ BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size);
+ return 0;
+}
+
+int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
+ u32 reg, u32 mask, u32 value)
+{
+ u32 *rp;
+ int rc;
+
+ if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0)
+ return rc;
+
+ /* write risc instructions */
+ rp = risc->cpu;
+ *(rp++) = cpu_to_le32(RISC_WRITECR | RISC_IRQ2);
+ *(rp++) = cpu_to_le32(reg);
+ *(rp++) = cpu_to_le32(value);
+ *(rp++) = cpu_to_le32(mask);
+ *(rp++) = cpu_to_le32(RISC_JUMP);
+ *(rp++) = cpu_to_le32(risc->dma);
+ *(rp++) = cpu_to_le32(0); /* bits 63-32 */
+ return 0;
+}
+
+void cx23885_free_buffer(struct videobuf_queue *q, struct cx23885_buffer *buf)
+{
+ struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
+
+ BUG_ON(in_interrupt());
+ videobuf_waiton(&buf->vb, 0, 0);
+ videobuf_dma_unmap(q, dma);
+ videobuf_dma_free(dma);
+ btcx_riscmem_free((struct pci_dev *)q->dev, &buf->risc);
+ buf->vb.state = STATE_NEEDS_INIT;
+}
+
+static int cx23885_start_dma(struct cx23885_tsport *port,
+ struct cx23885_dmaqueue *q,
+ struct cx23885_buffer *buf)
+{
+ struct cx23885_dev *dev = port->dev;
+
+ dprintk(1, "%s() w: %d, h: %d, f: %d\n", __FUNCTION__,
+ buf->vb.width, buf->vb.height, buf->vb.field);
+
+ /* setup fifo + format */
+ cx23885_sram_channel_setup(dev,
+ &dev->sram_channels[ port->sram_chno ],
+ port->ts_packet_size, buf->risc.dma);
+ if(debug > 5) {
+ cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ] );
+ cx23885_risc_disasm(port, &buf->risc);
+ }
+
+ /* write TS length to chip */
+ cx_write(port->reg_lngth, buf->vb.width);
+
+ if ( (!(cx23885_boards[dev->board].portb & CX23885_MPEG_DVB)) &&
+ (!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB)) ) {
+ printk( "%s() Failed. Unsupported value in .portb/c (0x%08x)/(0x%08x)\n",
+ __FUNCTION__,
+ cx23885_boards[dev->board].portb,
+ cx23885_boards[dev->board].portc );
+ return -EINVAL;
+ }
+
+ udelay(100);
+
+ /* If the port supports SRC SELECT, configure it */
+ if(port->reg_src_sel)
+ cx_write(port->reg_src_sel, port->src_sel_val);
+
+ cx_write(port->reg_hw_sop_ctrl, 0x47 << 16 | 188 << 4);
+ cx_write(port->reg_ts_clk_en, port->ts_clk_en_val);
+ cx_write(port->reg_vld_misc, 0x00);
+ cx_write(port->reg_gen_ctrl, port->gen_ctrl_val);
+ udelay(100);
+
+ // NOTE: this is 2 (reserved) for portb, does it matter?
+ /* reset counter to zero */
+ cx_write(port->reg_gpcnt_ctl, 3);
+ q->count = 1;
+
+ switch(dev->bridge) {
+ case CX23885_BRIDGE_885:
+ case CX23885_BRIDGE_887:
+ /* enable irqs */
+ dprintk(1, "%s() enabling TS int's and DMA\n", __FUNCTION__ );
+ cx_set(port->reg_ts_int_msk, port->ts_int_msk_val);
+ cx_set(port->reg_dma_ctl, port->dma_ctl_val);
+ cx_set(PCI_INT_MSK, dev->pci_irqmask | port->pci_irqmask);
+ break;
+ default:
+ BUG();
+ }
+
+ cx_set(DEV_CNTRL2, (1<<5)); /* Enable RISC controller */
+
+ return 0;
+}
+
+static int cx23885_stop_dma(struct cx23885_tsport *port)
+{
+ struct cx23885_dev *dev = port->dev;
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ /* Stop interrupts and DMA */
+ cx_clear(port->reg_ts_int_msk, port->ts_int_msk_val);
+ cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+
+ return 0;
+}
+
+static int cx23885_restart_queue(struct cx23885_tsport *port,
+ struct cx23885_dmaqueue *q)
+{
+ struct cx23885_dev *dev = port->dev;
+ struct cx23885_buffer *buf;
+
+ dprintk(5, "%s()\n", __FUNCTION__);
+ if (list_empty(&q->active))
+ {
+ struct cx23885_buffer *prev;
+ prev = NULL;
+
+ dprintk(5, "%s() queue is empty\n", __FUNCTION__);
+
+ for (;;) {
+ if (list_empty(&q->queued))
+ return 0;
+ buf = list_entry(q->queued.next, struct cx23885_buffer,
+ vb.queue);
+ if (NULL == prev) {
+ list_del(&buf->vb.queue);
+ list_add_tail(&buf->vb.queue, &q->active);
+ cx23885_start_dma(port, q, buf);
+ buf->vb.state = STATE_ACTIVE;
+ buf->count = q->count++;
+ mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+ dprintk(5, "[%p/%d] restart_queue - first active\n",
+ buf, buf->vb.i);
+
+ } else if (prev->vb.width == buf->vb.width &&
+ prev->vb.height == buf->vb.height &&
+ prev->fmt == buf->fmt) {
+ list_del(&buf->vb.queue);
+ list_add_tail(&buf->vb.queue, &q->active);
+ buf->vb.state = STATE_ACTIVE;
+ buf->count = q->count++;
+ prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+ prev->risc.jmp[2] = cpu_to_le32(0); /* 64 bit bits 63-32 */
+ dprintk(5,"[%p/%d] restart_queue - move to active\n",
+ buf, buf->vb.i);
+ } else {
+ return 0;
+ }
+ prev = buf;
+ }
+ return 0;
+ }
+
+ buf = list_entry(q->active.next, struct cx23885_buffer, vb.queue);
+ dprintk(2, "restart_queue [%p/%d]: restart dma\n",
+ buf, buf->vb.i);
+ cx23885_start_dma(port, q, buf);
+ list_for_each_entry(buf, &q->active, vb.queue)
+ buf->count = q->count++;
+ mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
+ return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+int cx23885_buf_prepare(struct videobuf_queue *q, struct cx23885_tsport *port,
+ struct cx23885_buffer *buf, enum v4l2_field field)
+{
+ struct cx23885_dev *dev = port->dev;
+ int size = port->ts_packet_size * port->ts_packet_count;
+ int rc;
+
+ dprintk(1, "%s: %p\n", __FUNCTION__, buf);
+ if (0 != buf->vb.baddr && buf->vb.bsize < size)
+ return -EINVAL;
+
+ if (STATE_NEEDS_INIT == buf->vb.state) {
+ buf->vb.width = port->ts_packet_size;
+ buf->vb.height = port->ts_packet_count;
+ buf->vb.size = size;
+ buf->vb.field = field /*V4L2_FIELD_TOP*/;
+
+ if (0 != (rc = videobuf_iolock(q, &buf->vb, NULL)))
+ goto fail;
+ cx23885_risc_databuffer(dev->pci, &buf->risc,
+ videobuf_to_dma(&buf->vb)->sglist,
+ buf->vb.width, buf->vb.height);
+ }
+ buf->vb.state = STATE_PREPARED;
+ return 0;
+
+ fail:
+ cx23885_free_buffer(q, buf);
+ return rc;
+}
+
+void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf)
+{
+ struct cx23885_buffer *prev;
+ struct cx23885_dev *dev = port->dev;
+ struct cx23885_dmaqueue *cx88q = &port->mpegq;
+
+ /* add jump to stopper */
+ buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
+ buf->risc.jmp[1] = cpu_to_le32(cx88q->stopper.dma);
+ buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */
+
+ if (list_empty(&cx88q->active)) {
+ dprintk( 1, "queue is empty - first active\n" );
+ list_add_tail(&buf->vb.queue, &cx88q->active);
+ cx23885_start_dma(port, cx88q, buf);
+ buf->vb.state = STATE_ACTIVE;
+ buf->count = cx88q->count++;
+ mod_timer(&cx88q->timeout, jiffies + BUFFER_TIMEOUT);
+ dprintk(1, "[%p/%d] %s - first active\n",
+ buf, buf->vb.i, __FUNCTION__);
+ } else {
+ dprintk( 1, "queue is not empty - append to active\n" );
+ prev = list_entry(cx88q->active.prev, struct cx23885_buffer,
+ vb.queue);
+ list_add_tail(&buf->vb.queue, &cx88q->active);
+ buf->vb.state = STATE_ACTIVE;
+ buf->count = cx88q->count++;
+ prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+ prev->risc.jmp[2] = cpu_to_le32(0); /* 64 bit bits 63-32 */
+ dprintk( 1, "[%p/%d] %s - append to active\n",
+ buf, buf->vb.i, __FUNCTION__);
+ }
+}
+
+/* ----------------------------------------------------------- */
+
+static void do_cancel_buffers(struct cx23885_tsport *port, char *reason,
+ int restart)
+{
+ struct cx23885_dev *dev = port->dev;
+ struct cx23885_dmaqueue *q = &port->mpegq;
+ struct cx23885_buffer *buf;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->slock, flags);
+ while (!list_empty(&q->active)) {
+ buf = list_entry(q->active.next, struct cx23885_buffer,
+ vb.queue);
+ list_del(&buf->vb.queue);
+ buf->vb.state = STATE_ERROR;
+ wake_up(&buf->vb.done);
+ dprintk(1, "[%p/%d] %s - dma=0x%08lx\n",
+ buf, buf->vb.i, reason, (unsigned long)buf->risc.dma);
+ }
+ if (restart) {
+ dprintk(1, "restarting queue\n" );
+ cx23885_restart_queue(port, q);
+ }
+ spin_unlock_irqrestore(&port->slock, flags);
+}
+
+void cx23885_cancel_buffers(struct cx23885_tsport *port)
+{
+ struct cx23885_dev *dev = port->dev;
+ struct cx23885_dmaqueue *q = &port->mpegq;
+
+ dprintk(1, "%s()\n", __FUNCTION__);
+ del_timer_sync(&q->timeout);
+ cx23885_stop_dma(port);
+ do_cancel_buffers(port, "cancel", 0);
+}
+
+static void cx23885_timeout(unsigned long data)
+{
+ struct cx23885_tsport *port = (struct cx23885_tsport *)data;
+ struct cx23885_dev *dev = port->dev;
+
+ dprintk(1, "%s()\n",__FUNCTION__);
+
+ if (debug > 5)
+ cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ]);
+
+ cx23885_stop_dma(port);
+ do_cancel_buffers(port, "timeout", 1);
+}
+
+static int cx23885_irq_ts(struct cx23885_tsport *port, u32 status)
+{
+ struct cx23885_dev *dev = port->dev;
+ int handled = 0;
+ u32 count;
+
+ if ( (status & VID_BC_MSK_OPC_ERR) ||
+ (status & VID_BC_MSK_BAD_PKT) ||
+ (status & VID_BC_MSK_SYNC) ||
+ (status & VID_BC_MSK_OF))
+ {
+ if (status & VID_BC_MSK_OPC_ERR)
+ dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n", VID_BC_MSK_OPC_ERR);
+ if (status & VID_BC_MSK_BAD_PKT)
+ dprintk(7, " (VID_BC_MSK_BAD_PKT 0x%08x)\n", VID_BC_MSK_BAD_PKT);
+ if (status & VID_BC_MSK_SYNC)
+ dprintk(7, " (VID_BC_MSK_SYNC 0x%08x)\n", VID_BC_MSK_SYNC);
+ if (status & VID_BC_MSK_OF)
+ dprintk(7, " (VID_BC_MSK_OF 0x%08x)\n", VID_BC_MSK_OF);
+
+ printk(KERN_ERR "%s: mpeg risc op code error\n", dev->name);
+
+ cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+ cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ]);
+
+ } else if (status & VID_BC_MSK_RISCI1) {
+
+ dprintk(7, " (RISCI1 0x%08x)\n", VID_BC_MSK_RISCI1);
+
+ spin_lock(&port->slock);
+ count = cx_read(port->reg_gpcnt);
+ cx23885_wakeup(port, &port->mpegq, count);
+ spin_unlock(&port->slock);
+
+ } else if (status & VID_BC_MSK_RISCI2) {
+
+ dprintk(7, " (RISCI2 0x%08x)\n", VID_BC_MSK_RISCI2);
+
+ spin_lock(&port->slock);
+ cx23885_restart_queue(port, &port->mpegq);
+ spin_unlock(&port->slock);
+
+ }
+ if (status) {
+ cx_write(port->reg_ts_int_stat, status);
+ handled = 1;
+ }
+
+ return handled;
+}
+
+static irqreturn_t cx23885_irq(int irq, void *dev_id)
+{
+ struct cx23885_dev *dev = dev_id;
+ struct cx23885_tsport *ts1 = &dev->ts1;
+ struct cx23885_tsport *ts2 = &dev->ts2;
+ u32 pci_status, pci_mask;
+ u32 ts1_status, ts1_mask;
+ u32 ts2_status, ts2_mask;
+ int ts1_count = 0, ts2_count = 0, handled = 0;
+
+ pci_status = cx_read(PCI_INT_STAT);
+ pci_mask = cx_read(PCI_INT_MSK);
+ ts1_status = cx_read(VID_B_INT_STAT);
+ ts1_mask = cx_read(VID_B_INT_MSK);
+ ts2_status = cx_read(VID_C_INT_STAT);
+ ts2_mask = cx_read(VID_C_INT_MSK);
+
+ if ( (pci_status == 0) && (ts2_status == 0) && (ts1_status == 0) )
+ goto out;
+
+ ts1_count = cx_read(ts1->reg_gpcnt);
+ ts2_count = cx_read(ts2->reg_gpcnt);
+ dprintk(7, "pci_status: 0x%08x pci_mask: 0x%08x\n", pci_status, pci_mask );
+ dprintk(7, "ts1_status: 0x%08x ts1_mask: 0x%08x count: 0x%x\n", ts1_status, ts1_mask, ts1_count );
+ dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n", ts2_status, ts2_mask, ts2_count );
+
+ if ( (pci_status & PCI_MSK_RISC_RD) ||
+ (pci_status & PCI_MSK_RISC_WR) ||
+ (pci_status & PCI_MSK_AL_RD) ||
+ (pci_status & PCI_MSK_AL_WR) ||
+ (pci_status & PCI_MSK_APB_DMA) ||
+ (pci_status & PCI_MSK_VID_C) ||
+ (pci_status & PCI_MSK_VID_B) ||
+ (pci_status & PCI_MSK_VID_A) ||
+ (pci_status & PCI_MSK_AUD_INT) ||
+ (pci_status & PCI_MSK_AUD_EXT) )
+ {
+
+ if (pci_status & PCI_MSK_RISC_RD)
+ dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n", PCI_MSK_RISC_RD);
+ if (pci_status & PCI_MSK_RISC_WR)
+ dprintk(7, " (PCI_MSK_RISC_WR 0x%08x)\n", PCI_MSK_RISC_WR);
+ if (pci_status & PCI_MSK_AL_RD)
+ dprintk(7, " (PCI_MSK_AL_RD 0x%08x)\n", PCI_MSK_AL_RD);
+ if (pci_status & PCI_MSK_AL_WR)
+ dprintk(7, " (PCI_MSK_AL_WR 0x%08x)\n", PCI_MSK_AL_WR);
+ if (pci_status & PCI_MSK_APB_DMA)
+ dprintk(7, " (PCI_MSK_APB_DMA 0x%08x)\n", PCI_MSK_APB_DMA);
+ if (pci_status & PCI_MSK_VID_C)
+ dprintk(7, " (PCI_MSK_VID_C 0x%08x)\n", PCI_MSK_VID_C);
+ if (pci_status & PCI_MSK_VID_B)
+ dprintk(7, " (PCI_MSK_VID_B 0x%08x)\n", PCI_MSK_VID_B);
+ if (pci_status & PCI_MSK_VID_A)
+ dprintk(7, " (PCI_MSK_VID_A 0x%08x)\n", PCI_MSK_VID_A);
+ if (pci_status & PCI_MSK_AUD_INT)
+ dprintk(7, " (PCI_MSK_AUD_INT 0x%08x)\n", PCI_MSK_AUD_INT);
+ if (pci_status & PCI_MSK_AUD_EXT)
+ dprintk(7, " (PCI_MSK_AUD_EXT 0x%08x)\n", PCI_MSK_AUD_EXT);
+
+ }
+
+ if (ts1_status)
+ handled += cx23885_irq_ts(ts1, ts1_status);
+
+ if (ts2_status)
+ handled += cx23885_irq_ts(ts2, ts2_status);
+
+ if (handled)
+ cx_write(PCI_INT_STAT, pci_status);
+out:
+ return IRQ_RETVAL(handled);
+}
+
+static int __devinit cx23885_initdev(struct pci_dev *pci_dev,
+ const struct pci_device_id *pci_id)
+{
+ struct cx23885_dev *dev;
+ int err;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (NULL == dev)
+ return -ENOMEM;
+
+ /* pci init */
+ dev->pci = pci_dev;
+ if (pci_enable_device(pci_dev)) {
+ err = -EIO;
+ goto fail_free;
+ }
+
+ if (cx23885_dev_setup(dev) < 0) {
+ err = -EINVAL;
+ goto fail_free;
+ }
+
+ /* print pci info */
+ pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev);
+ pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
+ printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
+ "latency: %d, mmio: 0x%llx\n", dev->name,
+ pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
+ dev->pci_lat, (unsigned long long)pci_resource_start(pci_dev,0));
+
+ pci_set_master(pci_dev);
+ if (!pci_dma_supported(pci_dev, 0xffffffff)) {
+ printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
+ err = -EIO;
+ goto fail_irq;
+ }
+
+ err = request_irq(pci_dev->irq, cx23885_irq,
+ IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+ if (err < 0) {
+ printk(KERN_ERR "%s: can't get IRQ %d\n",
+ dev->name, pci_dev->irq);
+ goto fail_irq;
+ }
+
+ pci_set_drvdata(pci_dev, dev);
+ return 0;
+
+fail_irq:
+ cx23885_dev_unregister(dev);
+fail_free:
+ kfree(dev);
+ return err;
+}
+
+static void __devexit cx23885_finidev(struct pci_dev *pci_dev)
+{
+ struct cx23885_dev *dev = pci_get_drvdata(pci_dev);
+
+ cx23885_shutdown(dev);
+
+ pci_disable_device(pci_dev);
+
+ /* unregister stuff */
+ free_irq(pci_dev->irq, dev);
+ pci_set_drvdata(pci_dev, NULL);
+
+ mutex_lock(&devlist);
+ list_del(&dev->devlist);
+ mutex_unlock(&devlist);
+
+ cx23885_dev_unregister(dev);
+ kfree(dev);
+}
+
+static struct pci_device_id cx23885_pci_tbl[] = {
+ {
+ /* CX23885 */
+ .vendor = 0x14f1,
+ .device = 0x8852,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },{
+ /* CX23887 Rev 2 */
+ .vendor = 0x14f1,
+ .device = 0x8880,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },{
+ /* --- end of list --- */
+ }
+};
+MODULE_DEVICE_TABLE(pci, cx23885_pci_tbl);
+
+static struct pci_driver cx23885_pci_driver = {
+ .name = "cx23885",
+ .id_table = cx23885_pci_tbl,
+ .probe = cx23885_initdev,
+ .remove = __devexit_p(cx23885_finidev),
+ /* TODO */
+ .suspend = NULL,
+ .resume = NULL,
+};
+
+static int cx23885_init(void)
+{
+ printk(KERN_INFO "cx23885 driver version %d.%d.%d loaded\n",
+ (CX23885_VERSION_CODE >> 16) & 0xff,
+ (CX23885_VERSION_CODE >> 8) & 0xff,
+ CX23885_VERSION_CODE & 0xff);
+#ifdef SNAPSHOT
+ printk(KERN_INFO "cx23885: snapshot date %04d-%02d-%02d\n",
+ SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
+#endif
+ return pci_register_driver(&cx23885_pci_driver);
+}
+
+static void cx23885_fini(void)
+{
+ pci_unregister_driver(&cx23885_pci_driver);
+}
+
+module_init(cx23885_init);
+module_exit(cx23885_fini);
+
+/* ----------------------------------------------------------- */
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
+ */
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
new file mode 100644
index 00000000000..eda8c05d093
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -0,0 +1,213 @@
+/*
+ * Driver for the Conexant CX23885 PCIe bridge
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/kthread.h>
+#include <linux/file.h>
+#include <linux/suspend.h>
+
+#include "cx23885.h"
+#include <media/v4l2-common.h>
+
+#include "s5h1409.h"
+#include "mt2131.h"
+#include "lgdt330x.h"
+#include "dvb-pll.h"
+
+static unsigned int debug = 0;
+
+#define dprintk(level,fmt, arg...) if (debug >= level) \
+ printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg)
+
+/* ------------------------------------------------------------------ */
+
+static int dvb_buf_setup(struct videobuf_queue *q,
+ unsigned int *count, unsigned int *size)
+{
+ struct cx23885_tsport *port = q->priv_data;
+
+ port->ts_packet_size = 188 * 4;
+ port->ts_packet_count = 32;
+
+ *size = port->ts_packet_size * port->ts_packet_count;
+ *count = 32;
+ return 0;
+}
+
+static int dvb_buf_prepare(struct videobuf_queue *q,
+ struct videobuf_buffer *vb, enum v4l2_field field)
+{
+ struct cx23885_tsport *port = q->priv_data;
+ return cx23885_buf_prepare(q, port, (struct cx23885_buffer*)vb, field);
+}
+
+static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+ struct cx23885_tsport *port = q->priv_data;
+ cx23885_buf_queue(port, (struct cx23885_buffer*)vb);
+}
+
+static void dvb_buf_release(struct videobuf_queue *q,
+ struct videobuf_buffer *vb)
+{
+ cx23885_free_buffer(q, (struct cx23885_buffer*)vb);
+}
+
+static struct videobuf_queue_ops dvb_qops = {
+ .buf_setup = dvb_buf_setup,
+ .buf_prepare = dvb_buf_prepare,
+ .buf_queue = dvb_buf_queue,
+ .buf_release = dvb_buf_release,
+};
+
+static struct s5h1409_config hauppauge_generic_config = {
+ .demod_address = 0x32 >> 1,
+ .output_mode = S5H1409_SERIAL_OUTPUT,
+ .gpio = S5H1409_GPIO_ON,
+ .if_freq = 44000,
+ .inversion = S5H1409_INVERSION_OFF,
+ .status_mode = S5H1409_DEMODLOCKING
+};
+
+static struct s5h1409_config hauppauge_hvr1800lp_config = {
+ .demod_address = 0x32 >> 1,
+ .output_mode = S5H1409_SERIAL_OUTPUT,
+ .gpio = S5H1409_GPIO_OFF,
+ .if_freq = 44000,
+ .inversion = S5H1409_INVERSION_OFF,
+ .status_mode = S5H1409_DEMODLOCKING
+};
+
+static struct mt2131_config hauppauge_generic_tunerconfig = {
+ 0x61
+};
+
+static struct lgdt330x_config fusionhdtv_5_express = {
+ .demod_address = 0x0e,
+ .demod_chip = LGDT3303,
+ .serial_mpeg = 0x40,
+};
+
+static int dvb_register(struct cx23885_tsport *port)
+{
+ struct cx23885_dev *dev = port->dev;
+ struct cx23885_i2c *i2c_bus = NULL;
+
+ /* init struct videobuf_dvb */
+ port->dvb.name = dev->name;
+
+ /* init frontend */
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ i2c_bus = &dev->i2c_bus[0];
+ port->dvb.frontend = dvb_attach(s5h1409_attach,
+ &hauppauge_generic_config,
+ &i2c_bus->i2c_adap);
+ if (port->dvb.frontend != NULL) {
+ dvb_attach(mt2131_attach, port->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &hauppauge_generic_tunerconfig, 0);
+ }
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+ i2c_bus = &dev->i2c_bus[0];
+ port->dvb.frontend = dvb_attach(s5h1409_attach,
+ &hauppauge_hvr1800lp_config,
+ &i2c_bus->i2c_adap);
+ if (port->dvb.frontend != NULL) {
+ dvb_attach(mt2131_attach, port->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &hauppauge_generic_tunerconfig, 0);
+ }
+ break;
+ case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
+ i2c_bus = &dev->i2c_bus[0];
+ port->dvb.frontend = dvb_attach(lgdt330x_attach,
+ &fusionhdtv_5_express,
+ &i2c_bus->i2c_adap);
+ if (port->dvb.frontend != NULL) {
+ dvb_attach(dvb_pll_attach, port->dvb.frontend, 0x61,
+ &i2c_bus->i2c_adap, DVB_PLL_LG_TDVS_H06XF);
+ }
+ break;
+ default:
+ printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
+ dev->name);
+ break;
+ }
+ if (NULL == port->dvb.frontend) {
+ printk("%s: frontend initialization failed\n", dev->name);
+ return -1;
+ }
+
+ /* Put the analog decoder in standby to keep it quiet */
+ cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL);
+
+ /* register everything */
+ return videobuf_dvb_register(&port->dvb, THIS_MODULE, port,
+ &dev->pci->dev);
+}
+
+int cx23885_dvb_register(struct cx23885_tsport *port)
+{
+ struct cx23885_dev *dev = port->dev;
+ int err;
+
+ dprintk(1, "%s\n", __FUNCTION__);
+ dprintk(1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
+ dev->board,
+ dev->name,
+ dev->pci_bus,
+ dev->pci_slot);
+
+ err = -ENODEV;
+
+ /* dvb stuff */
+ printk("%s: cx23885 based dvb card\n", dev->name);
+ videobuf_queue_pci_init(&port->dvb.dvbq, &dvb_qops, dev->pci, &port->slock,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
+ sizeof(struct cx23885_buffer), port);
+ err = dvb_register(port);
+ if (err != 0)
+ printk("%s() dvb_register failed err = %d\n", __FUNCTION__, err);
+
+ return err;
+}
+
+int cx23885_dvb_unregister(struct cx23885_tsport *port)
+{
+ /* dvb */
+ if(port->dvb.frontend)
+ videobuf_dvb_unregister(&port->dvb);
+
+ return 0;
+}
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
+*/
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
new file mode 100644
index 00000000000..b517c8b5a56
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -0,0 +1,382 @@
+/*
+ * Driver for the Conexant CX23885 PCIe bridge
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "cx23885.h"
+
+#include <media/v4l2-common.h>
+
+static unsigned int i2c_debug = 0;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+static unsigned int i2c_scan = 0;
+module_param(i2c_scan, int, 0444);
+MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
+
+#define dprintk(level,fmt, arg...) if (i2c_debug >= level) \
+ printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg)
+
+#define I2C_WAIT_DELAY 32
+#define I2C_WAIT_RETRY 64
+
+#define I2C_EXTEND (1 << 3)
+#define I2C_NOSTOP (1 << 4)
+
+static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap)
+{
+ struct cx23885_i2c *bus = i2c_adap->algo_data;
+ struct cx23885_dev *dev = bus->dev;
+ return cx_read(bus->reg_stat) & 0x01;
+}
+
+static inline int i2c_is_busy(struct i2c_adapter *i2c_adap)
+{
+ struct cx23885_i2c *bus = i2c_adap->algo_data;
+ struct cx23885_dev *dev = bus->dev;
+ return cx_read(bus->reg_stat) & 0x02 ? 1 : 0;
+}
+
+static int i2c_wait_done(struct i2c_adapter *i2c_adap)
+{
+ int count;
+
+ for (count = 0; count < I2C_WAIT_RETRY; count++) {
+ if (!i2c_is_busy(i2c_adap))
+ break;
+ udelay(I2C_WAIT_DELAY);
+ }
+
+ if (I2C_WAIT_RETRY == count)
+ return 0;
+
+ return 1;
+}
+
+static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
+ const struct i2c_msg *msg, int last)
+{
+ struct cx23885_i2c *bus = i2c_adap->algo_data;
+ struct cx23885_dev *dev = bus->dev;
+ u32 wdata, addr, ctrl;
+ int retval, cnt;
+
+ dprintk(1, "%s()\n", __FUNCTION__);
+ /* Deal with i2c probe functions with zero payload */
+ if (msg->len == 0) {
+ cx_write(bus->reg_addr, msg->addr << 25);
+ cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2));
+ if (!i2c_wait_done(i2c_adap))
+ return -EIO;
+ if (!i2c_slave_did_ack(i2c_adap))
+ return -EIO;
+
+ dprintk(1, "%s() returns 0\n", __FUNCTION__);
+ return 0;
+ }
+
+
+ /* dev, reg + first byte */
+ addr = (msg->addr << 25) | msg->buf[0];
+ wdata = msg->buf[0];
+ ctrl = bus->i2c_period | (1 << 12) | (1 << 2);
+
+ if (msg->len > 1)
+ ctrl |= I2C_NOSTOP | I2C_EXTEND;
+
+ cx_write(bus->reg_addr, addr);
+ cx_write(bus->reg_wdata, wdata);
+ cx_write(bus->reg_ctrl, ctrl);
+
+ retval = i2c_wait_done(i2c_adap);
+ if (retval < 0)
+ goto err;
+ if (retval == 0)
+ goto eio;
+ if (i2c_debug) {
+ printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
+ if (!(ctrl & I2C_NOSTOP))
+ printk(" >\n");
+ }
+
+ for (cnt = 1; cnt < msg->len; cnt++ ) {
+ /* following bytes */
+ wdata = msg->buf[cnt];
+ ctrl = bus->i2c_period | (1 << 12) | (1 << 2);
+
+ if (cnt < msg->len-1 || !last)
+ ctrl |= I2C_NOSTOP | I2C_EXTEND;
+
+ cx_write(bus->reg_addr, addr);
+ cx_write(bus->reg_wdata, wdata);
+ cx_write(bus->reg_ctrl, ctrl);
+
+ retval = i2c_wait_done(i2c_adap);
+ if (retval < 0)
+ goto err;
+ if (retval == 0)
+ goto eio;
+ if (i2c_debug) {
+ printk(" %02x", msg->buf[cnt]);
+ if (!(ctrl & I2C_NOSTOP))
+ printk(" >\n");
+ }
+ }
+ return msg->len;
+
+ eio:
+ retval = -EIO;
+ err:
+ printk(" ERR: %d\n", retval);
+ return retval;
+}
+
+static int i2c_readbytes(struct i2c_adapter *i2c_adap,
+ const struct i2c_msg *msg, int last)
+{
+ struct cx23885_i2c *bus = i2c_adap->algo_data;
+ struct cx23885_dev *dev = bus->dev;
+ u32 ctrl, cnt;
+ int retval;
+
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ /* Deal with i2c probe functions with zero payload */
+ if (msg->len == 0) {
+ cx_write(bus->reg_addr, msg->addr << 25);
+ cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2) | 1);
+ if (!i2c_wait_done(i2c_adap))
+ return -EIO;
+ if (!i2c_slave_did_ack(i2c_adap))
+ return -EIO;
+
+
+ dprintk(1, "%s() returns 0\n", __FUNCTION__);
+ return 0;
+ }
+
+ for(cnt = 0; cnt < msg->len; cnt++) {
+
+ ctrl = bus->i2c_period | (1 << 12) | (1 << 2) | 1;
+
+ if (cnt < msg->len-1 || !last)
+ ctrl |= I2C_NOSTOP | I2C_EXTEND;
+
+ cx_write(bus->reg_addr, msg->addr << 25);
+ cx_write(bus->reg_ctrl, ctrl);
+
+ retval = i2c_wait_done(i2c_adap);
+ if (retval < 0)
+ goto err;
+ if (retval == 0)
+ goto eio;
+ msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff;
+ if (i2c_debug) {
+ if (!(ctrl & I2C_NOSTOP))
+ printk(" <R %02x", (msg->addr << 1) +1);
+ printk(" =%02x", msg->buf[cnt]);
+ if (!(ctrl & I2C_NOSTOP))
+ printk(" >\n");
+ }
+ }
+ return msg->len;
+
+ eio:
+ retval = -EIO;
+ err:
+ printk(" ERR: %d\n", retval);
+ return retval;
+}
+
+static int i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct cx23885_i2c *bus = i2c_adap->algo_data;
+ struct cx23885_dev *dev = bus->dev;
+ int i, retval = 0;
+
+ dprintk(1, "%s(num = %d)\n", __FUNCTION__, num);
+
+ for (i = 0 ; i < num; i++) {
+ dprintk(1, "%s(num = %d) addr = 0x%02x len = 0x%x\n",
+ __FUNCTION__, num, msgs[i].addr, msgs[i].len);
+ if (msgs[i].flags & I2C_M_RD) {
+ /* read */
+ retval = i2c_readbytes(i2c_adap, &msgs[i], i+1 == num);
+ if (retval < 0)
+ goto err;
+ } else {
+ /* write */
+ retval = i2c_sendbytes(i2c_adap, &msgs[i], i+1 == num);
+ if (retval < 0)
+ goto err;
+ }
+ }
+ return num;
+
+ err:
+ return retval;
+}
+
+static int attach_inform(struct i2c_client *client)
+{
+ struct cx23885_dev *dev = i2c_get_adapdata(client->adapter);
+
+ dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n",
+ client->driver->driver.name, client->addr, client->name);
+
+ if (!client->driver->command)
+ return 0;
+
+ return 0;
+}
+
+static int detach_inform(struct i2c_client *client)
+{
+ struct cx23885_dev *dev = i2c_get_adapdata(client->adapter);
+
+ dprintk(1, "i2c detach [client=%s]\n", client->name);
+
+ return 0;
+}
+
+void cx23885_call_i2c_clients(struct cx23885_i2c *bus,
+ unsigned int cmd, void *arg)
+{
+ if (bus->i2c_rc != 0)
+ return;
+
+ i2c_clients_command(&bus->i2c_adap, cmd, arg);
+}
+
+static int cx23885_algo_control(struct i2c_adapter *adap,
+ unsigned int cmd, unsigned long arg)
+{
+ return 0;
+}
+
+static u32 cx23885_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm cx23885_i2c_algo_template = {
+ .master_xfer = i2c_xfer,
+ .algo_control = cx23885_algo_control,
+ .functionality = cx23885_functionality,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct i2c_adapter cx23885_i2c_adap_template = {
+ .name = "cx23885",
+ .owner = THIS_MODULE,
+ .id = I2C_HW_B_CX23885,
+ .algo = &cx23885_i2c_algo_template,
+ .client_register = attach_inform,
+ .client_unregister = detach_inform,
+};
+
+static struct i2c_client cx23885_i2c_client_template = {
+ .name = "cx23885 internal",
+};
+
+static char *i2c_devs[128] = {
+ [ 0x1c >> 1 ] = "lgdt3303",
+ [ 0x86 >> 1 ] = "tda9887",
+ [ 0x32 >> 1 ] = "cx24227",
+ [ 0x88 >> 1 ] = "cx25837",
+ [ 0x84 >> 1 ] = "tda8295",
+ [ 0xa0 >> 1 ] = "eeprom",
+ [ 0xc0 >> 1 ] = "tuner/mt2131/tda8275",
+ [ 0xc2 >> 1 ] = "tuner/mt2131/tda8275",
+};
+
+static void do_i2c_scan(char *name, struct i2c_client *c)
+{
+ unsigned char buf;
+ int i, rc;
+
+ for (i = 0; i < 128; i++) {
+ c->addr = i;
+ rc = i2c_master_recv(c, &buf, 0);
+ if (rc < 0)
+ continue;
+ printk("%s: i2c scan: found device @ 0x%x [%s]\n",
+ name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
+ }
+}
+
+/* init + register i2c algo-bit adapter */
+int cx23885_i2c_register(struct cx23885_i2c *bus)
+{
+ struct cx23885_dev *dev = bus->dev;
+
+ dprintk(1, "%s(bus = %d)\n", __FUNCTION__, bus->nr);
+
+ memcpy(&bus->i2c_adap, &cx23885_i2c_adap_template,
+ sizeof(bus->i2c_adap));
+ memcpy(&bus->i2c_algo, &cx23885_i2c_algo_template,
+ sizeof(bus->i2c_algo));
+ memcpy(&bus->i2c_client, &cx23885_i2c_client_template,
+ sizeof(bus->i2c_client));
+
+ bus->i2c_adap.dev.parent = &dev->pci->dev;
+
+ strlcpy(bus->i2c_adap.name, bus->dev->name,
+ sizeof(bus->i2c_adap.name));
+
+ bus->i2c_algo.data = bus;
+ bus->i2c_adap.algo_data = bus;
+ i2c_add_adapter(&bus->i2c_adap);
+
+ bus->i2c_client.adapter = &bus->i2c_adap;
+
+ if (0 == bus->i2c_rc) {
+ printk("%s: i2c bus %d registered\n", dev->name, bus->nr);
+ if (i2c_scan)
+ do_i2c_scan(dev->name, &bus->i2c_client);
+ } else
+ printk("%s: i2c bus %d register FAILED\n", dev->name, bus->nr);
+
+ return bus->i2c_rc;
+}
+
+int cx23885_i2c_unregister(struct cx23885_i2c *bus)
+{
+ i2c_del_adapter(&bus->i2c_adap);
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+EXPORT_SYMBOL(cx23885_call_i2c_clients);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h
new file mode 100644
index 00000000000..162169f9091
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-reg.h
@@ -0,0 +1,431 @@
+/*
+ * Driver for the Conexant CX23885 PCIe bridge
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _CX23885_REG_H_
+#define _CX23885_REG_H_
+
+/*
+Address Map
+0x00000000 -> 0x00009000 TX SRAM (Fifos)
+0x00010000 -> 0x00013c00 RX SRAM CMDS + CDT
+
+EACH CMDS struct is 0x80 bytes long
+
+DMAx_PTR1 = 0x03040 address of first cluster
+DMAx_PTR2 = 0x10600 address of the CDT
+DMAx_CNT1 = cluster size in (bytes >> 4) -1
+DMAx_CNT2 = total cdt size for all entries >> 3
+
+Cluster Descriptor entry = 4 DWORDS
+ DWORD 0 -> ptr to cluster
+ DWORD 1 Reserved
+ DWORD 2 Reserved
+ DWORD 3 Reserved
+
+Channel manager Data Structure entry = 20 DWORD
+ 0 IntialProgramCounterLow
+ 1 IntialProgramCounterHigh
+ 2 ClusterDescriptorTableBase
+ 3 ClusterDescriptorTableSize
+ 4 InstructionQueueBase
+ 5 InstructionQueueSize
+... Reserved
+ 19 Reserved
+*/
+
+/* Risc Instructions */
+#define RISC_CNT_INC 0x00010000
+#define RISC_CNT_RESET 0x00030000
+#define RISC_IRQ1 0x01000000
+#define RISC_IRQ2 0x02000000
+#define RISC_EOL 0x04000000
+#define RISC_SOL 0x08000000
+#define RISC_WRITE 0x10000000
+#define RISC_SKIP 0x20000000
+#define RISC_JUMP 0x70000000
+#define RISC_SYNC 0x80000000
+#define RISC_RESYNC 0x80008000
+#define RISC_READ 0x90000000
+#define RISC_WRITERM 0xB0000000
+#define RISC_WRITECM 0xC0000000
+#define RISC_WRITECR 0xD0000000
+#define RISC_WRITEC 0x50000000
+#define RISC_READC 0xA0000000
+
+
+/* Audio and Video Core */
+#define HOST_REG1 0x00000000
+#define HOST_REG2 0x00000001
+#define HOST_REG3 0x00000002
+
+/* Chip Configuration Registers */
+#define CHIP_CTRL 0x00000100
+#define AFE_CTRL 0x00000104
+#define VID_PLL_INT_POST 0x00000108
+#define VID_PLL_FRAC 0x0000010C
+#define AUX_PLL_INT_POST 0x00000110
+#define AUX_PLL_FRAC 0x00000114
+#define SYS_PLL_INT_POST 0x00000118
+#define SYS_PLL_FRAC 0x0000011C
+#define PIN_CTRL 0x00000120
+#define AUD_IO_CTRL 0x00000124
+#define AUD_LOCK1 0x00000128
+#define AUD_LOCK2 0x0000012C
+#define POWER_CTRL 0x00000130
+#define AFE_DIAG_CTRL1 0x00000134
+#define AFE_DIAG_CTRL3 0x0000013C
+#define PLL_DIAG_CTRL 0x00000140
+#define AFE_CLK_OUT_CTRL 0x00000144
+#define DLL1_DIAG_CTRL 0x0000015C
+
+/* GPIO[23:19] Output Enable */
+#define GPIO2_OUT_EN_REG 0x00000160
+/* GPIO[23:19] Data Registers */
+#define GPIO2 0x00000164
+
+#define IFADC_CTRL 0x00000180
+
+/* Infrared Remote Registers */
+#define IR_CNTRL_REG 0x00000200
+#define IR_TXCLK_REG 0x00000204
+#define IR_RXCLK_REG 0x00000208
+#define IR_CDUTY_REG 0x0000020C
+#define IR_STAT_REG 0x00000210
+#define IR_IRQEN_REG 0x00000214
+#define IR_FILTR_REG 0x00000218
+#define IR_FIFO_REG 0x0000023C
+
+/* Video Decoder Registers */
+#define MODE_CTRL 0x00000400
+#define OUT_CTRL1 0x00000404
+#define OUT_CTRL2 0x00000408
+#define GEN_STAT 0x0000040C
+#define INT_STAT_MASK 0x00000410
+#define LUMA_CTRL 0x00000414
+#define HSCALE_CTRL 0x00000418
+#define VSCALE_CTRL 0x0000041C
+#define CHROMA_CTRL 0x00000420
+#define VBI_LINE_CTRL1 0x00000424
+#define VBI_LINE_CTRL2 0x00000428
+#define VBI_LINE_CTRL3 0x0000042C
+#define VBI_LINE_CTRL4 0x00000430
+#define VBI_LINE_CTRL5 0x00000434
+#define VBI_FC_CFG 0x00000438
+#define VBI_MISC_CFG1 0x0000043C
+#define VBI_MISC_CFG2 0x00000440
+#define VBI_PAY1 0x00000444
+#define VBI_PAY2 0x00000448
+#define VBI_CUST1_CFG1 0x0000044C
+#define VBI_CUST1_CFG2 0x00000450
+#define VBI_CUST1_CFG3 0x00000454
+#define VBI_CUST2_CFG1 0x00000458
+#define VBI_CUST2_CFG2 0x0000045C
+#define VBI_CUST2_CFG3 0x00000460
+#define VBI_CUST3_CFG1 0x00000464
+#define VBI_CUST3_CFG2 0x00000468
+#define VBI_CUST3_CFG3 0x0000046C
+#define HORIZ_TIM_CTRL 0x00000470
+#define VERT_TIM_CTRL 0x00000474
+#define SRC_COMB_CFG 0x00000478
+#define CHROMA_VBIOFF_CFG 0x0000047C
+#define FIELD_COUNT 0x00000480
+#define MISC_TIM_CTRL 0x00000484
+#define DFE_CTRL1 0x00000488
+#define DFE_CTRL2 0x0000048C
+#define DFE_CTRL3 0x00000490
+#define PLL_CTRL 0x00000494
+#define HTL_CTRL 0x00000498
+#define COMB_CTRL 0x0000049C
+#define CRUSH_CTRL 0x000004A0
+#define SOFT_RST_CTRL 0x000004A4
+#define CX885_VERSION 0x000004B4
+#define VBI_PASS_CTRL 0x000004BC
+
+/* Audio Decoder Registers */
+/* 8051 Configuration */
+#define DL_CTL 0x00000800
+#define STD_DET_STATUS 0x00000804
+#define STD_DET_CTL 0x00000808
+#define DW8051_INT 0x0000080C
+#define GENERAL_CTL 0x00000810
+#define AAGC_CTL 0x00000814
+#define DEMATRIX_CTL 0x000008CC
+#define PATH1_CTL1 0x000008D0
+#define PATH1_VOL_CTL 0x000008D4
+#define PATH1_EQ_CTL 0x000008D8
+#define PATH1_SC_CTL 0x000008DC
+#define PATH2_CTL1 0x000008E0
+#define PATH2_VOL_CTL 0x000008E4
+#define PATH2_EQ_CTL 0x000008E8
+#define PATH2_SC_CTL 0x000008EC
+
+/* Sample Rate Converter */
+#define SRC_CTL 0x000008F0
+#define SRC_LF_COEF 0x000008F4
+#define SRC1_CTL 0x000008F8
+#define SRC2_CTL 0x000008FC
+#define SRC3_CTL 0x00000900
+#define SRC4_CTL 0x00000904
+#define SRC5_CTL 0x00000908
+#define SRC6_CTL 0x0000090C
+#define BAND_OUT_SEL 0x00000910
+#define I2S_N_CTL 0x00000914
+#define I2S_OUT_CTL 0x00000918
+#define AUTOCONFIG_REG 0x000009C4
+
+/* Audio ADC Registers */
+#define DSM_CTRL1 0x00000000
+#define DSM_CTRL2 0x00000001
+#define CHP_EN_CTRL 0x00000002
+#define CHP_CLK_CTRL1 0x00000004
+#define CHP_CLK_CTRL2 0x00000005
+#define BG_REF_CTRL 0x00000006
+#define SD2_SW_CTRL1 0x00000008
+#define SD2_SW_CTRL2 0x00000009
+#define SD2_BIAS_CTRL 0x0000000A
+#define AMP_BIAS_CTRL 0x0000000C
+#define CH_PWR_CTRL1 0x0000000E
+#define CH_PWR_CTRL2 0x0000000F
+#define DSM_STATUS1 0x00000010
+#define DSM_STATUS2 0x00000011
+#define DIG_CTL1 0x00000012
+#define DIG_CTL2 0x00000013
+#define I2S_TX_CFG 0x0000001A
+
+#define DEV_CNTRL2 0x00040000
+
+#define PCI_MSK_APB_DMA (1 << 12)
+#define PCI_MSK_AL_WR (1 << 11)
+#define PCI_MSK_AL_RD (1 << 10)
+#define PCI_MSK_RISC_WR (1 << 9)
+#define PCI_MSK_RISC_RD (1 << 8)
+#define PCI_MSK_AUD_EXT (1 << 4)
+#define PCI_MSK_AUD_INT (1 << 3)
+#define PCI_MSK_VID_C (1 << 2)
+#define PCI_MSK_VID_B (1 << 1)
+#define PCI_MSK_VID_A 1
+#define PCI_INT_MSK 0x00040010
+
+#define PCI_INT_STAT 0x00040014
+#define PCI_INT_MSTAT 0x00040018
+
+#define VID_A_INT_MSK 0x00040020
+#define VID_A_INT_STAT 0x00040024
+#define VID_A_INT_MSTAT 0x00040028
+#define VID_A_INT_SSTAT 0x0004002C
+
+#define VID_B_INT_MSK 0x00040030
+#define VID_B_INT_STAT 0x00040034
+#define VID_B_INT_MSTAT 0x00040038
+#define VID_B_INT_SSTAT 0x0004003C
+
+#define VID_B_MSK_BAD_PKT (1 << 20)
+#define VID_B_MSK_OPC_ERR (1 << 16)
+#define VID_B_MSK_SYNC (1 << 12)
+#define VID_B_MSK_OF (1 << 8)
+#define VID_B_MSK_RISCI2 (1 << 4)
+#define VID_B_MSK_RISCI1 1
+
+#define VID_C_MSK_BAD_PKT (1 << 20)
+#define VID_C_MSK_OPC_ERR (1 << 16)
+#define VID_C_MSK_SYNC (1 << 12)
+#define VID_C_MSK_OF (1 << 8)
+#define VID_C_MSK_RISCI2 (1 << 4)
+#define VID_C_MSK_RISCI1 1
+
+/* A superset for testing purposes */
+#define VID_BC_MSK_BAD_PKT (1 << 20)
+#define VID_BC_MSK_OPC_ERR (1 << 16)
+#define VID_BC_MSK_SYNC (1 << 12)
+#define VID_BC_MSK_OF (1 << 8)
+#define VID_BC_MSK_RISCI2 (1 << 4)
+#define VID_BC_MSK_RISCI1 1
+
+#define VID_C_INT_MSK 0x00040040
+#define VID_C_INT_STAT 0x00040044
+#define VID_C_INT_MSTAT 0x00040048
+#define VID_C_INT_SSTAT 0x0004004C
+
+#define AUDIO_INT_INT_MSK 0x00040050
+#define AUDIO_INT_INT_STAT 0x00040054
+#define AUDIO_INT_INT_MSTAT 0x00040058
+#define AUDIO_INT_INT_SSTAT 0x0004005C
+
+#define AUDIO_EXT_INT_MSK 0x00040060
+#define AUDIO_EXT_INT_STAT 0x00040064
+#define AUDIO_EXT_INT_MSTAT 0x00040068
+#define AUDIO_EXT_INT_SSTAT 0x0004006C
+
+#define RDR_CFG0 0x00050000
+#define RDR_CFG1 0x00050004
+#define RDR_TLCTL0 0x00050318
+
+/* APB DMAC Current Buffer Pointer */
+#define DMA1_PTR1 0x00100000
+#define DMA2_PTR1 0x00100004
+#define DMA3_PTR1 0x00100008
+#define DMA4_PTR1 0x0010000C
+#define DMA5_PTR1 0x00100010
+#define DMA6_PTR1 0x00100014
+#define DMA7_PTR1 0x00100018
+#define DMA8_PTR1 0x0010001C
+
+/* APB DMAC Current Table Pointer */
+#define DMA1_PTR2 0x00100040
+#define DMA2_PTR2 0x00100044
+#define DMA3_PTR2 0x00100048
+#define DMA4_PTR2 0x0010004C
+#define DMA5_PTR2 0x00100050
+#define DMA6_PTR2 0x00100054
+#define DMA7_PTR2 0x00100058
+#define DMA8_PTR2 0x0010005C
+
+/* APB DMAC Buffer Limit */
+#define DMA1_CNT1 0x00100080
+#define DMA2_CNT1 0x00100084
+#define DMA3_CNT1 0x00100088
+#define DMA4_CNT1 0x0010008C
+#define DMA5_CNT1 0x00100090
+#define DMA6_CNT1 0x00100094
+#define DMA7_CNT1 0x00100098
+#define DMA8_CNT1 0x0010009C
+
+/* APB DMAC Table Size */
+#define DMA1_CNT2 0x001000C0
+#define DMA2_CNT2 0x001000C4
+#define DMA3_CNT2 0x001000C8
+#define DMA4_CNT2 0x001000CC
+#define DMA5_CNT2 0x001000D0
+#define DMA6_CNT2 0x001000D4
+#define DMA7_CNT2 0x001000D8
+#define DMA8_CNT2 0x001000DC
+
+/* Timer Counters */
+#define TM_CNT_LDW 0x00110000
+#define TM_CNT_UW 0x00110004
+#define TM_LMT_LDW 0x00110008
+#define TM_LMT_UW 0x0011000C
+
+/* GPIO */
+#define GP0_IO 0x00110010
+#define GPIO_ISM 0x00110014
+#define SOFT_RESET 0x0011001C
+
+/* GPIO (417 Microsoftcontroller) RW Data */
+#define MC417_RWD 0x00110020
+
+/* GPIO (417 Microsoftcontroller) Output Enable, Low Active */
+#define MC417_OEN 0x00110024
+#define MC417_CTL 0x00110028
+#define CLK_DELAY 0x00110048
+#define PAD_CTRL 0x0011004C
+
+/* Video A Interface */
+#define VID_A_GPCNT 0x00130020
+#define VBI_A_GPCNT 0x00130024
+#define VID_A_GPCNT_CTL 0x00130030
+#define VBI_A_GPCNT_CTL 0x00130034
+#define VID_A_DMA_CTL 0x00130040
+#define VID_A_VIP_CTRL 0x00130080
+#define VID_A_PIXEL_FRMT 0x00130084
+#define VID_A_VBI_CTRL 0x00130088
+
+/* Video B Interface */
+#define VID_B_DMA 0x00130100
+#define VBI_B_DMA 0x00130108
+#define VID_B_GPCNT 0x00130120
+#define VBI_B_GPCNT 0x00130124
+#define VID_B_GPCNT_CTL 0x00130134
+#define VBI_B_GPCNT_CTL 0x00130138
+#define VID_B_DMA_CTL 0x00130140
+#define VID_B_SRC_SEL 0x00130144
+#define VID_B_LNGTH 0x00130150
+#define VID_B_HW_SOP_CTL 0x00130154
+#define VID_B_GEN_CTL 0x00130158
+#define VID_B_BD_PKT_STATUS 0x0013015C
+#define VID_B_SOP_STATUS 0x00130160
+#define VID_B_FIFO_OVFL_STAT 0x00130164
+#define VID_B_VLD_MISC 0x00130168
+#define VID_B_TS_CLK_EN 0x0013016C
+#define VID_B_VIP_CTRL 0x00130180
+#define VID_B_PIXEL_FRMT 0x00130184
+
+/* Video C Interface */
+#define VID_C_GPCNT 0x00130220
+#define VID_C_GPCNT_CTL 0x00130230
+#define VBI_C_GPCNT_CTL 0x00130234
+#define VID_C_DMA_CTL 0x00130240
+#define VID_C_LNGTH 0x00130250
+#define VID_C_HW_SOP_CTL 0x00130254
+#define VID_C_GEN_CTL 0x00130258
+#define VID_C_BD_PKT_STATUS 0x0013025C
+#define VID_C_SOP_STATUS 0x00130260
+#define VID_C_FIFO_OVFL_STAT 0x00130264
+#define VID_C_VLD_MISC 0x00130268
+#define VID_C_TS_CLK_EN 0x0013026C
+
+/* Internal Audio Interface */
+#define AUD_INT_A_GPCNT 0x00140020
+#define AUD_INT_B_GPCNT 0x00140024
+#define AUD_INT_A_GPCNT_CTL 0x00140030
+#define AUD_INT_B_GPCNT_CTL 0x00140034
+#define AUD_INT_DMA_CTL 0x00140040
+#define AUD_INT_A_LNGTH 0x00140050
+#define AUD_INT_B_LNGTH 0x00140054
+#define AUD_INT_A_MODE 0x00140058
+#define AUD_INT_B_MODE 0x0014005C
+
+/* External Audio Interface */
+#define AUD_EXT_DMA 0x00140100
+#define AUD_EXT_GPCNT 0x00140120
+#define AUD_EXT_GPCNT_CTL 0x00140130
+#define AUD_EXT_DMA_CTL 0x00140140
+#define AUD_EXT_LNGTH 0x00140150
+#define AUD_EXT_A_MODE 0x00140158
+
+/* I2C Bus 1 */
+#define I2C1_ADDR 0x00180000
+#define I2C1_WDATA 0x00180004
+#define I2C1_CTRL 0x00180008
+#define I2C1_RDATA 0x0018000C
+#define I2C1_STAT 0x00180010
+
+/* I2C Bus 2 */
+#define I2C2_ADDR 0x00190000
+#define I2C2_WDATA 0x00190004
+#define I2C2_CTRL 0x00190008
+#define I2C2_RDATA 0x0019000C
+#define I2C2_STAT 0x00190010
+
+/* I2C Bus 3 */
+#define I2C3_ADDR 0x001A0000
+#define I2C3_WDATA 0x001A0004
+#define I2C3_CTRL 0x001A0008
+#define I2C3_RDATA 0x001A000C
+#define I2C3_STAT 0x001A0010
+
+/* UART */
+#define UART_CTL 0x001B0000
+#define UART_BRD 0x001B0004
+#define UART_ISR 0x001B000C
+#define UART_CNT 0x001B0010
+
+#endif /* _CX23885_REG_H_ */
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
new file mode 100644
index 00000000000..dec4dc2fcbb
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -0,0 +1,301 @@
+/*
+ * Driver for the Conexant CX23885 PCIe bridge
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/kdev_t.h>
+
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include <media/tveeprom.h>
+#include <media/videobuf-dma-sg.h>
+#include <media/videobuf-dvb.h>
+
+#include "btcx-risc.h"
+#include "cx23885-reg.h"
+
+#include <linux/version.h>
+#include <linux/mutex.h>
+
+#define CX23885_VERSION_CODE KERNEL_VERSION(0,0,1)
+
+#define UNSET (-1U)
+
+#define CX23885_MAXBOARDS 8
+
+/* Max number of inputs by card */
+#define MAX_CX23885_INPUT 8
+
+#define BUFFER_TIMEOUT (HZ) /* 0.5 seconds */
+
+#define CX23885_BOARD_NOAUTO UNSET
+#define CX23885_BOARD_UNKNOWN 0
+#define CX23885_BOARD_HAUPPAUGE_HVR1800lp 1
+#define CX23885_BOARD_HAUPPAUGE_HVR1800 2
+#define CX23885_BOARD_HAUPPAUGE_HVR1250 3
+#define CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP 4
+
+enum cx23885_itype {
+ CX23885_VMUX_COMPOSITE1 = 1,
+ CX23885_VMUX_COMPOSITE2,
+ CX23885_VMUX_COMPOSITE3,
+ CX23885_VMUX_COMPOSITE4,
+ CX23885_VMUX_SVIDEO,
+ CX23885_VMUX_TELEVISION,
+ CX23885_VMUX_CABLE,
+ CX23885_VMUX_DVB,
+ CX23885_VMUX_DEBUG,
+ CX23885_RADIO,
+};
+
+enum cx23885_src_sel_type {
+ CX23885_SRC_SEL_EXT_656_VIDEO = 0,
+ CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO
+};
+
+/* buffer for one video frame */
+struct cx23885_buffer {
+ /* common v4l buffer stuff -- must be first */
+ struct videobuf_buffer vb;
+
+ /* cx23885 specific */
+ unsigned int bpl;
+ struct btcx_riscmem risc;
+ struct cx23885_fmt *fmt;
+ u32 count;
+};
+
+struct cx23885_input {
+ enum cx23885_itype type;
+ unsigned int vmux;
+ u32 gpio0, gpio1, gpio2, gpio3;
+};
+
+typedef enum {
+ CX23885_MPEG_UNDEFINED = 0,
+ CX23885_MPEG_DVB
+} port_t;
+
+struct cx23885_board {
+ char *name;
+ port_t portb, portc;
+ struct cx23885_input input[MAX_CX23885_INPUT];
+};
+
+struct cx23885_subid {
+ u16 subvendor;
+ u16 subdevice;
+ u32 card;
+};
+
+struct cx23885_i2c {
+ struct cx23885_dev *dev;
+
+ int nr;
+
+ /* i2c i/o */
+ struct i2c_adapter i2c_adap;
+ struct i2c_algo_bit_data i2c_algo;
+ struct i2c_client i2c_client;
+ u32 i2c_rc;
+
+ /* 885 registers used for raw addess */
+ u32 i2c_period;
+ u32 reg_ctrl;
+ u32 reg_stat;
+ u32 reg_addr;
+ u32 reg_rdata;
+ u32 reg_wdata;
+};
+
+struct cx23885_dmaqueue {
+ struct list_head active;
+ struct list_head queued;
+ struct timer_list timeout;
+ struct btcx_riscmem stopper;
+ u32 count;
+};
+
+struct cx23885_tsport {
+ struct cx23885_dev *dev;
+
+ int nr;
+ int sram_chno;
+
+ struct videobuf_dvb dvb;
+
+ /* dma queues */
+ struct cx23885_dmaqueue mpegq;
+ u32 ts_packet_size;
+ u32 ts_packet_count;
+
+ int width;
+ int height;
+
+ spinlock_t slock;
+
+ /* registers */
+ u32 reg_gpcnt;
+ u32 reg_gpcnt_ctl;
+ u32 reg_dma_ctl;
+ u32 reg_lngth;
+ u32 reg_hw_sop_ctrl;
+ u32 reg_gen_ctrl;
+ u32 reg_bd_pkt_status;
+ u32 reg_sop_status;
+ u32 reg_fifo_ovfl_stat;
+ u32 reg_vld_misc;
+ u32 reg_ts_clk_en;
+ u32 reg_ts_int_msk;
+ u32 reg_ts_int_stat;
+ u32 reg_src_sel;
+
+ /* Default register vals */
+ int pci_irqmask;
+ u32 dma_ctl_val;
+ u32 ts_int_msk_val;
+ u32 gen_ctrl_val;
+ u32 ts_clk_en_val;
+ u32 src_sel_val;
+};
+
+struct cx23885_dev {
+ struct list_head devlist;
+ atomic_t refcount;
+
+ /* pci stuff */
+ struct pci_dev *pci;
+ unsigned char pci_rev, pci_lat;
+ int pci_bus, pci_slot;
+ u32 __iomem *lmmio;
+ u8 __iomem *bmmio;
+ int pci_irqmask;
+
+ /* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */
+ struct cx23885_i2c i2c_bus[3];
+
+ int nr;
+ struct mutex lock;
+
+ /* board details */
+ unsigned int board;
+ char name[32];
+
+ struct cx23885_tsport ts1, ts2;
+
+ /* sram configuration */
+ struct sram_channel *sram_channels;
+
+ enum {
+ CX23885_BRIDGE_UNDEFINED = 0,
+ CX23885_BRIDGE_885 = 885,
+ CX23885_BRIDGE_887 = 887,
+ } bridge;
+};
+
+#define SRAM_CH01 0 /* Video A */
+#define SRAM_CH02 1 /* VBI A */
+#define SRAM_CH03 2 /* Video B */
+#define SRAM_CH04 3 /* Transport via B */
+#define SRAM_CH05 4 /* VBI B */
+#define SRAM_CH06 5 /* Video C */
+#define SRAM_CH07 6 /* Transport via C */
+#define SRAM_CH08 7 /* Audio Internal A */
+#define SRAM_CH09 8 /* Audio Internal B */
+#define SRAM_CH10 9 /* Audio External */
+#define SRAM_CH11 10 /* COMB_3D_N */
+#define SRAM_CH12 11 /* Comb 3D N1 */
+#define SRAM_CH13 12 /* Comb 3D N2 */
+#define SRAM_CH14 13 /* MOE Vid */
+#define SRAM_CH15 14 /* MOE RSLT */
+
+struct sram_channel {
+ char *name;
+ u32 cmds_start;
+ u32 ctrl_start;
+ u32 cdt;
+ u32 fifo_start;;
+ u32 fifo_size;
+ u32 ptr1_reg;
+ u32 ptr2_reg;
+ u32 cnt1_reg;
+ u32 cnt2_reg;
+ u32 jumponly;
+};
+
+/* ----------------------------------------------------------- */
+
+#define cx_read(reg) readl(dev->lmmio + ((reg)>>2))
+#define cx_write(reg,value) writel((value), dev->lmmio + ((reg)>>2))
+
+#define cx_andor(reg,mask,value) \
+ writel((readl(dev->lmmio+((reg)>>2)) & ~(mask)) |\
+ ((value) & (mask)), dev->lmmio+((reg)>>2))
+
+#define cx_set(reg,bit) cx_andor((reg),(bit),(bit))
+#define cx_clear(reg,bit) cx_andor((reg),(bit),0)
+
+extern int cx23885_sram_channel_setup(struct cx23885_dev *dev,
+ struct sram_channel *ch,
+ unsigned int bpl, u32 risc);
+
+/* ----------------------------------------------------------- */
+/* cx23885-cards.c */
+
+extern struct cx23885_board cx23885_boards[];
+extern const unsigned int cx23885_bcount;
+
+extern struct cx23885_subid cx23885_subids[];
+extern const unsigned int cx23885_idcount;
+
+extern void cx23885_card_list(struct cx23885_dev *dev);
+extern int cx23885_ir_init(struct cx23885_dev *dev);
+extern void cx23885_gpio_setup(struct cx23885_dev *dev);
+extern void cx23885_card_setup(struct cx23885_dev *dev);
+extern void cx23885_card_setup_pre_i2c(struct cx23885_dev *dev);
+
+extern int cx23885_dvb_register(struct cx23885_tsport *port);
+extern int cx23885_dvb_unregister(struct cx23885_tsport *port);
+
+extern int cx23885_buf_prepare(struct videobuf_queue *q,
+ struct cx23885_tsport *port,
+ struct cx23885_buffer *buf,
+ enum v4l2_field field);
+
+extern void cx23885_buf_queue(struct cx23885_tsport *port,
+ struct cx23885_buffer *buf);
+extern void cx23885_free_buffer(struct videobuf_queue *q,
+ struct cx23885_buffer *buf);
+
+/* ----------------------------------------------------------- */
+/* cx23885-i2c.c */
+extern int cx23885_i2c_register(struct cx23885_i2c *bus);
+extern int cx23885_i2c_unregister(struct cx23885_i2c *bus);
+extern void cx23885_call_i2c_clients(struct cx23885_i2c *bus, unsigned int cmd,
+ void *arg);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
+ */
diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c
index f897c1ebd5f..3d46a776df3 100644
--- a/drivers/media/video/cx25840/cx25840-audio.c
+++ b/drivers/media/video/cx25840/cx25840-audio.c
@@ -157,13 +157,12 @@ void cx25840_audio_set_path(struct i2c_client *client)
{
struct cx25840_state *state = i2c_get_clientdata(client);
+ /* assert soft reset */
+ cx25840_and_or(client, 0x810, ~0x1, 0x01);
+
/* stop microcontroller */
cx25840_and_or(client, 0x803, ~0x10, 0);
- /* assert soft reset */
- if (!state->is_cx25836)
- cx25840_and_or(client, 0x810, ~0x1, 0x01);
-
/* Mute everything to prevent the PFFT! */
cx25840_write(client, 0x8d3, 0x1f);
@@ -181,32 +180,46 @@ void cx25840_audio_set_path(struct i2c_client *client)
set_audclk_freq(client, state->audclk_freq);
- /* deassert soft reset */
- if (!state->is_cx25836)
- cx25840_and_or(client, 0x810, ~0x1, 0x00);
-
if (state->aud_input != CX25840_AUDIO_SERIAL) {
/* When the microcontroller detects the
* audio format, it will unmute the lines */
cx25840_and_or(client, 0x803, ~0x10, 0x10);
}
+
+ /* deassert soft reset */
+ cx25840_and_or(client, 0x810, ~0x1, 0x00);
}
static int get_volume(struct i2c_client *client)
{
+ struct cx25840_state *state = i2c_get_clientdata(client);
+ int vol;
+
+ if (state->unmute_volume >= 0)
+ return state->unmute_volume;
+
/* Volume runs +18dB to -96dB in 1/2dB steps
* change to fit the msp3400 -114dB to +12dB range */
/* check PATH1_VOLUME */
- int vol = 228 - cx25840_read(client, 0x8d4);
+ vol = 228 - cx25840_read(client, 0x8d4);
vol = (vol / 2) + 23;
return vol << 9;
}
static void set_volume(struct i2c_client *client, int volume)
{
- /* First convert the volume to msp3400 values (0-127) */
- int vol = volume >> 9;
+ struct cx25840_state *state = i2c_get_clientdata(client);
+ int vol;
+
+ if (state->unmute_volume >= 0) {
+ state->unmute_volume = volume;
+ return;
+ }
+
+ /* Convert the volume to msp3400 values (0-127) */
+ vol = volume >> 9;
+
/* now scale it up to cx25840 values
* -114dB to -96dB maps to 0
* this should be 19, but in my testing that was 4dB too loud */
@@ -284,30 +297,26 @@ static void set_balance(struct i2c_client *client, int balance)
static int get_mute(struct i2c_client *client)
{
- /* check SRC1_MUTE_EN */
- return cx25840_read(client, 0x8d3) & 0x2 ? 1 : 0;
+ struct cx25840_state *state = i2c_get_clientdata(client);
+
+ return state->unmute_volume >= 0;
}
static void set_mute(struct i2c_client *client, int mute)
{
struct cx25840_state *state = i2c_get_clientdata(client);
- if (state->aud_input != CX25840_AUDIO_SERIAL) {
- /* Must turn off microcontroller in order to mute sound.
- * Not sure if this is the best method, but it does work.
- * If the microcontroller is running, then it will undo any
- * changes to the mute register. */
- if (mute) {
- /* disable microcontroller */
- cx25840_and_or(client, 0x803, ~0x10, 0x00);
- cx25840_write(client, 0x8d3, 0x1f);
- } else {
- /* enable microcontroller */
- cx25840_and_or(client, 0x803, ~0x10, 0x10);
- }
- } else {
- /* SRC1_MUTE_EN */
- cx25840_and_or(client, 0x8d3, ~0x2, mute ? 0x02 : 0x00);
+ if (mute && state->unmute_volume == -1) {
+ int vol = get_volume(client);
+
+ set_volume(client, 0);
+ state->unmute_volume = vol;
+ }
+ else if (!mute && state->unmute_volume != -1) {
+ int vol = state->unmute_volume;
+
+ state->unmute_volume = -1;
+ set_volume(client, vol);
}
}
@@ -319,18 +328,18 @@ int cx25840_audio(struct i2c_client *client, unsigned int cmd, void *arg)
switch (cmd) {
case VIDIOC_INT_AUDIO_CLOCK_FREQ:
+ if (!state->is_cx25836)
+ cx25840_and_or(client, 0x810, ~0x1, 1);
if (state->aud_input != CX25840_AUDIO_SERIAL) {
cx25840_and_or(client, 0x803, ~0x10, 0);
cx25840_write(client, 0x8d3, 0x1f);
}
- if (!state->is_cx25836)
- cx25840_and_or(client, 0x810, ~0x1, 1);
retval = set_audclk_freq(client, *(u32 *)arg);
- if (!state->is_cx25836)
- cx25840_and_or(client, 0x810, ~0x1, 0);
if (state->aud_input != CX25840_AUDIO_SERIAL) {
cx25840_and_or(client, 0x803, ~0x10, 0x10);
}
+ if (!state->is_cx25836)
+ cx25840_and_or(client, 0x810, ~0x1, 0);
return retval;
case VIDIOC_G_CTRL:
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 67bda9f9a44..15f191e170d 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -34,6 +34,7 @@
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/i2c.h>
+#include <linux/delay.h>
#include <media/v4l2-common.h>
#include <media/v4l2-chip-ident.h>
#include <media/cx25840.h>
@@ -133,7 +134,9 @@ static void init_dll1(struct i2c_client *client)
cx25840_write(client, 0x159, 0x23);
cx25840_write(client, 0x15a, 0x87);
cx25840_write(client, 0x15b, 0x06);
+ udelay(10);
cx25840_write(client, 0x159, 0xe1);
+ udelay(10);
cx25840_write(client, 0x15a, 0x86);
cx25840_write(client, 0x159, 0xe0);
cx25840_write(client, 0x159, 0xe1);
@@ -147,6 +150,7 @@ static void init_dll2(struct i2c_client *client)
cx25840_write(client, 0x15d, 0xe3);
cx25840_write(client, 0x15e, 0x86);
cx25840_write(client, 0x15f, 0x06);
+ udelay(10);
cx25840_write(client, 0x15d, 0xe1);
cx25840_write(client, 0x15d, 0xe0);
cx25840_write(client, 0x15d, 0xe1);
@@ -165,9 +169,7 @@ static void cx25836_initialize(struct i2c_client *client)
/* 3c. */
cx25840_and_or(client, 0x159, ~0x02, 0x02);
/* 3d. */
- /* There should be a 10-us delay here, but since the
- i2c bus already has a 10-us delay we don't need to do
- anything */
+ udelay(10);
/* 3e. */
cx25840_and_or(client, 0x159, ~0x02, 0x00);
/* 3f. */
@@ -179,9 +181,18 @@ static void cx25836_initialize(struct i2c_client *client)
cx25840_and_or(client, 0x15b, ~0x1e, 0x10);
}
-static void cx25840_initialize(struct i2c_client *client, int loadfw)
+static void cx25840_work_handler(struct work_struct *work)
{
+ struct cx25840_state *state = container_of(work, struct cx25840_state, fw_work);
+ cx25840_loadfw(state->c);
+ wake_up(&state->fw_wait);
+}
+
+static void cx25840_initialize(struct i2c_client *client)
+{
+ DEFINE_WAIT(wait);
struct cx25840_state *state = i2c_get_clientdata(client);
+ struct workqueue_struct *q;
/* datasheet startup in numbered steps, refer to page 3-77 */
/* 2. */
@@ -197,8 +208,19 @@ static void cx25840_initialize(struct i2c_client *client, int loadfw)
cx25840_write(client, 0x13c, 0x01);
cx25840_write(client, 0x13c, 0x00);
/* 5. */
- if (loadfw)
- cx25840_loadfw(client);
+ /* Do the firmware load in a work handler to prevent.
+ Otherwise the kernel is blocked waiting for the
+ bit-banging i2c interface to finish uploading the
+ firmware. */
+ INIT_WORK(&state->fw_work, cx25840_work_handler);
+ init_waitqueue_head(&state->fw_wait);
+ q = create_singlethread_workqueue("cx25840_fw");
+ prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE);
+ queue_work(q, &state->fw_work);
+ schedule();
+ finish_wait(&state->fw_wait, &wait);
+ destroy_workqueue(q);
+
/* 6. */
cx25840_write(client, 0x115, 0x8c);
cx25840_write(client, 0x116, 0x07);
@@ -251,8 +273,13 @@ static void input_change(struct i2c_client *client)
}
cx25840_and_or(client, 0x401, ~0x60, 0);
cx25840_and_or(client, 0x401, ~0x60, 0x60);
+ cx25840_and_or(client, 0x810, ~0x01, 1);
- if (std & V4L2_STD_525_60) {
+ if (state->radio) {
+ cx25840_write(client, 0x808, 0xf9);
+ cx25840_write(client, 0x80b, 0x00);
+ }
+ else if (std & V4L2_STD_525_60) {
/* Certain Hauppauge PVR150 models have a hardware bug
that causes audio to drop out. For these models the
audio standard must be set explicitly.
@@ -281,11 +308,7 @@ static void input_change(struct i2c_client *client)
cx25840_write(client, 0x80b, 0x10);
}
- if (cx25840_read(client, 0x803) & 0x10) {
- /* restart audio decoder microcontroller */
- cx25840_and_or(client, 0x803, ~0x10, 0x00);
- cx25840_and_or(client, 0x803, ~0x10, 0x10);
- }
+ cx25840_and_or(client, 0x810, ~0x01, 0);
}
static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input,
@@ -625,6 +648,22 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd,
struct v4l2_tuner *vt = arg;
struct v4l2_routing *route = arg;
+ /* ignore these commands */
+ switch (cmd) {
+ case TUNER_SET_TYPE_ADDR:
+ return 0;
+ }
+
+ if (!state->is_initialized) {
+ v4l_dbg(1, cx25840_debug, client, "cmd %08x triggered fw load\n", cmd);
+ /* initialize on first use */
+ state->is_initialized = 1;
+ if (state->is_cx25836)
+ cx25836_initialize(client);
+ else
+ cx25840_initialize(client);
+ }
+
switch (cmd) {
#ifdef CONFIG_VIDEO_ADV_DEBUG
/* ioctls to allow direct access to the
@@ -825,7 +864,7 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd,
if (state->is_cx25836)
cx25836_initialize(client);
else
- cx25840_initialize(client, 0);
+ cx25840_initialize(client);
break;
case VIDIOC_G_CHIP_IDENT:
@@ -856,17 +895,16 @@ static int cx25840_detect_client(struct i2c_adapter *adapter, int address,
if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
return 0;
- state = kzalloc(sizeof(struct cx25840_state), GFP_KERNEL);
- if (state == 0)
+ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (client == 0)
return -ENOMEM;
- client = &state->c;
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_cx25840;
snprintf(client->name, sizeof(client->name) - 1, "cx25840");
- v4l_dbg(1, cx25840_debug, client, "detecting cx25840 client on address 0x%x\n", address << 1);
+ v4l_dbg(1, cx25840_debug, client, "detecting cx25840 client on address 0x%x\n", client->addr << 1);
device_id = cx25840_read(client, 0x101) << 8;
device_id |= cx25840_read(client, 0x100);
@@ -875,42 +913,44 @@ static int cx25840_detect_client(struct i2c_adapter *adapter, int address,
* 0x83 for the cx2583x and 0x84 for the cx2584x */
if ((device_id & 0xff00) == 0x8300) {
id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6;
- state->is_cx25836 = 1;
}
else if ((device_id & 0xff00) == 0x8400) {
id = V4L2_IDENT_CX25840 + ((device_id >> 4) & 0xf);
- state->is_cx25836 = 0;
}
else {
v4l_dbg(1, cx25840_debug, client, "cx25840 not found\n");
- kfree(state);
+ kfree(client);
return 0;
}
+ state = kzalloc(sizeof(struct cx25840_state), GFP_KERNEL);
+ if (state == NULL) {
+ kfree(client);
+ return -ENOMEM;
+ }
+
/* Note: revision '(device_id & 0x0f) == 2' was never built. The
marking skips from 0x1 == 22 to 0x3 == 23. */
v4l_info(client, "cx25%3x-2%x found @ 0x%x (%s)\n",
(device_id & 0xfff0) >> 4,
(device_id & 0x0f) < 3 ? (device_id & 0x0f) + 1 : (device_id & 0x0f),
- address << 1, adapter->name);
+ client->addr << 1, client->adapter->name);
i2c_set_clientdata(client, state);
+ state->c = client;
+ state->is_cx25836 = ((device_id & 0xff00) == 0x8300);
state->vid_input = CX25840_COMPOSITE7;
state->aud_input = CX25840_AUDIO8;
state->audclk_freq = 48000;
state->pvr150_workaround = 0;
state->audmode = V4L2_TUNER_MODE_LANG1;
+ state->unmute_volume = -1;
state->vbi_line_offset = 8;
state->id = id;
state->rev = device_id;
i2c_attach_client(client);
- if (state->is_cx25836)
- cx25836_initialize(client);
- else
- cx25840_initialize(client, 1);
-
return 0;
}
@@ -932,6 +972,7 @@ static int cx25840_detach_client(struct i2c_client *client)
}
kfree(state);
+ kfree(client);
return 0;
}
@@ -1056,9 +1097,10 @@ static void log_audio_status(struct i2c_client *client)
}
v4l_info(client, "Detected audio standard: %s\n", p);
v4l_info(client, "Audio muted: %s\n",
- (mute_ctl & 0x2) ? "yes" : "no");
+ (state->unmute_volume >= 0) ? "yes" : "no");
v4l_info(client, "Audio microcontroller: %s\n",
- (download_ctl & 0x10) ? "running" : "stopped");
+ (download_ctl & 0x10) ?
+ ((mute_ctl & 0x2) ? "detecting" : "running") : "stopped");
switch (audio_config >> 4) {
case 0x00: p = "undefined"; break;
diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h
index f4b56d2fd6b..ea669b1f084 100644
--- a/drivers/media/video/cx25840/cx25840-core.h
+++ b/drivers/media/video/cx25840/cx25840-core.h
@@ -35,17 +35,21 @@ extern int cx25840_debug;
#define CX25840_CID_ENABLE_PVR150_WORKAROUND (V4L2_CID_PRIVATE_BASE+0)
struct cx25840_state {
- struct i2c_client c;
+ struct i2c_client *c;
int pvr150_workaround;
int radio;
enum cx25840_video_input vid_input;
enum cx25840_audio_input aud_input;
u32 audclk_freq;
int audmode;
+ int unmute_volume; /* -1 if not muted */
int vbi_line_offset;
u32 id;
u32 rev;
int is_cx25836;
+ int is_initialized;
+ wait_queue_head_t fw_wait; /* wake up when the fw load is finished */
+ struct work_struct fw_work; /* work entry for fw load */
};
/* ----------------------------------------------------------------------- */
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index f750a543c96..eeb5224ca10 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -4,7 +4,7 @@ config VIDEO_CX88
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
- select VIDEO_BUF
+ select VIDEOBUF_DMA_SG
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_IR
@@ -46,7 +46,7 @@ config VIDEO_CX88_BLACKBIRD
config VIDEO_CX88_DVB
tristate "DVB/ATSC Support for cx2388x based TV cards"
depends on VIDEO_CX88 && DVB_CORE
- select VIDEO_BUF_DVB
+ select VIDEOBUF_DVB
select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index 2d666b56020..90c36c5705c 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -3,6 +3,7 @@
* Support for audio capture
* PCI function #1 of the cx2388x.
*
+ * (c) 2007 Trent Piepho <xyzzy@speakeasy.org>
* (c) 2005,2006 Ricardo Cerqueira <v4l@cerqueira.org>
* (c) 2005 Mauro Carvalho Chehab <mchehab@infradead.org>
* Based on a dummy cx88 module by Gerd Knorr <kraxel@bytesex.org>
@@ -27,7 +28,9 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
#include <linux/dma-mapping.h>
+#include <linux/pci.h>
#include <asm/delay.h>
#include <sound/driver.h>
@@ -46,21 +49,16 @@
#define dprintk_core(level,fmt, arg...) if (debug >= level) \
printk(KERN_DEBUG "%s/1: " fmt, chip->core->name , ## arg)
-
/****************************************************************************
Data type declarations - Can be moded to a header file later
****************************************************************************/
-/* These can be replaced after done */
-#define MIXER_ADDR_LAST MAX_CX88_INPUT
-
struct cx88_audio_dev {
struct cx88_core *core;
struct cx88_dmaqueue q;
/* pci i/o */
struct pci_dev *pci;
- unsigned char pci_rev,pci_lat;
/* audio controls */
int irq;
@@ -68,24 +66,17 @@ struct cx88_audio_dev {
struct snd_card *card;
spinlock_t reg_lock;
+ atomic_t count;
unsigned int dma_size;
unsigned int period_size;
unsigned int num_periods;
- struct videobuf_dmabuf dma_risc;
-
- int mixer_volume[MIXER_ADDR_LAST+1][2];
- int capture_source[MIXER_ADDR_LAST+1][2];
-
- long int read_count;
- long int read_offset;
-
- struct cx88_buffer *buf;
+ struct videobuf_dmabuf *dma_risc;
- long opened;
- struct snd_pcm_substream *substream;
+ struct cx88_buffer *buf;
+ struct snd_pcm_substream *substream;
};
typedef struct cx88_audio_dev snd_cx88_card_t;
@@ -98,7 +89,6 @@ typedef struct cx88_audio_dev snd_cx88_card_t;
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
-static struct snd_card *snd_cx88_cards[SNDRV_CARDS];
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable cx88x soundcard. default enabled.");
@@ -136,38 +126,39 @@ static int _cx88_start_audio_dma(snd_cx88_card_t *chip)
struct cx88_core *core=chip->core;
struct sram_channel *audio_ch = &cx88_sram_channels[SRAM_CH25];
-
- dprintk(1, "Starting audio DMA for %i bytes/line and %i (%i) lines at address %08x\n",buf->bpl, chip->num_periods, audio_ch->fifo_size / buf->bpl, audio_ch->fifo_start);
+ /* Make sure RISC/FIFO are off before changing FIFO/RISC settings */
+ cx_clear(MO_AUD_DMACNTRL, 0x11);
/* setup fifo + format - out channel */
- cx88_sram_channel_setup(chip->core, &cx88_sram_channels[SRAM_CH25],
- buf->bpl, buf->risc.dma);
+ cx88_sram_channel_setup(chip->core, audio_ch, buf->bpl, buf->risc.dma);
/* sets bpl size */
cx_write(MO_AUDD_LNGTH, buf->bpl);
/* reset counter */
- cx_write(MO_AUDD_GPCNTRL,GP_COUNT_CONTROL_RESET);
-
- dprintk(1,"Enabling IRQ, setting mask from 0x%x to 0x%x\n",chip->core->pci_irqmask,(chip->core->pci_irqmask | 0x02));
- /* enable irqs */
- cx_set(MO_PCI_INTMSK, chip->core->pci_irqmask | 0x02);
+ cx_write(MO_AUDD_GPCNTRL, GP_COUNT_CONTROL_RESET);
+ atomic_set(&chip->count, 0);
+ dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d "
+ "byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1,
+ chip->num_periods, buf->bpl * chip->num_periods);
/* Enables corresponding bits at AUD_INT_STAT */
- cx_write(MO_AUD_INTMSK,
- (1<<16)|
- (1<<12)|
- (1<<4)|
- (1<<0)
- );
+ cx_write(MO_AUD_INTMSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC |
+ AUD_INT_DN_RISCI2 | AUD_INT_DN_RISCI1);
+
+ /* Clean any pending interrupt bits already set */
+ cx_write(MO_AUD_INTSTAT, ~0);
+
+ /* enable audio irqs */
+ cx_set(MO_PCI_INTMSK, chip->core->pci_irqmask | PCI_INT_AUDINT);
/* start dma */
cx_set(MO_DEV_CNTRL2, (1<<5)); /* Enables Risc Processor */
cx_set(MO_AUD_DMACNTRL, 0x11); /* audio downstream FIFO and RISC enable */
if (debug)
- cx88_sram_channel_dump(chip->core, &cx88_sram_channels[SRAM_CH25]);
+ cx88_sram_channel_dump(chip->core, audio_ch);
return 0;
}
@@ -184,13 +175,9 @@ static int _cx88_stop_audio_dma(snd_cx88_card_t *chip)
cx_clear(MO_AUD_DMACNTRL, 0x11);
/* disable irqs */
- cx_clear(MO_PCI_INTMSK, 0x02);
- cx_clear(MO_AUD_INTMSK,
- (1<<16)|
- (1<<12)|
- (1<<4)|
- (1<<0)
- );
+ cx_clear(MO_PCI_INTMSK, PCI_INT_AUDINT);
+ cx_clear(MO_AUD_INTMSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC |
+ AUD_INT_DN_RISCI2 | AUD_INT_DN_RISCI1);
if (debug)
cx88_sram_channel_dump(chip->core, &cx88_sram_channels[SRAM_CH25]);
@@ -198,7 +185,7 @@ static int _cx88_stop_audio_dma(snd_cx88_card_t *chip)
return 0;
}
-#define MAX_IRQ_LOOP 10
+#define MAX_IRQ_LOOP 50
/*
* BOARD Specific: IRQ dma bits
@@ -223,42 +210,32 @@ static void cx8801_aud_irq(snd_cx88_card_t *chip)
{
struct cx88_core *core = chip->core;
u32 status, mask;
- u32 count;
status = cx_read(MO_AUD_INTSTAT);
mask = cx_read(MO_AUD_INTMSK);
- if (0 == (status & mask)) {
- spin_unlock(&chip->reg_lock);
+ if (0 == (status & mask))
return;
- }
cx_write(MO_AUD_INTSTAT, status);
if (debug > 1 || (status & mask & ~0xff))
cx88_print_irqbits(core->name, "irq aud",
cx88_aud_irqs, ARRAY_SIZE(cx88_aud_irqs),
status, mask);
/* risc op code error */
- if (status & (1 << 16)) {
- printk(KERN_WARNING "%s/0: audio risc op code error\n",core->name);
+ if (status & AUD_INT_OPC_ERR) {
+ printk(KERN_WARNING "%s/1: Audio risc op code error\n",core->name);
cx_clear(MO_AUD_DMACNTRL, 0x11);
cx88_sram_channel_dump(core, &cx88_sram_channels[SRAM_CH25]);
}
-
- /* risc1 downstream */
- if (status & 0x01) {
- spin_lock(&chip->reg_lock);
- count = cx_read(MO_AUDD_GPCNT);
- spin_unlock(&chip->reg_lock);
- if (chip->read_count == 0)
- chip->read_count += chip->dma_size;
+ if (status & AUD_INT_DN_SYNC) {
+ dprintk(1, "Downstream sync error\n");
+ cx_write(MO_AUDD_GPCNTRL, GP_COUNT_CONTROL_RESET);
+ return;
}
-
- if (chip->read_count >= chip->period_size) {
- dprintk(2, "Elapsing period\n");
+ /* risc1 downstream */
+ if (status & AUD_INT_DN_RISCI1) {
+ atomic_set(&chip->count, cx_read(MO_AUDD_GPCNT));
snd_pcm_period_elapsed(chip->substream);
}
-
- dprintk(3,"Leaving audio IRQ handler...\n");
-
/* FIXME: Any other status should deserve a special handling? */
}
@@ -273,27 +250,26 @@ static irqreturn_t cx8801_irq(int irq, void *dev_id)
int loop, handled = 0;
for (loop = 0; loop < MAX_IRQ_LOOP; loop++) {
- status = cx_read(MO_PCI_INTSTAT) & (core->pci_irqmask | 0x02);
+ status = cx_read(MO_PCI_INTSTAT) &
+ (core->pci_irqmask | PCI_INT_AUDINT);
if (0 == status)
goto out;
- dprintk( 3, "cx8801_irq\n" );
- dprintk( 3, " loop: %d/%d\n", loop, MAX_IRQ_LOOP );
- dprintk( 3, " status: %d\n", status );
+ dprintk(3, "cx8801_irq loop %d/%d, status %x\n",
+ loop, MAX_IRQ_LOOP, status);
handled = 1;
cx_write(MO_PCI_INTSTAT, status);
- if (status & 0x02)
- {
- dprintk( 2, " ALSA IRQ handling\n" );
+ if (status & core->pci_irqmask)
+ cx88_core_irq(core, status);
+ if (status & PCI_INT_AUDINT)
cx8801_aud_irq(chip);
- }
- };
+ }
if (MAX_IRQ_LOOP == loop) {
- dprintk( 0, "clearing mask\n" );
- dprintk(1,"%s/0: irq loop -- clearing mask\n",
+ printk(KERN_ERR
+ "%s/1: IRQ loop detected, disabling interrupts\n",
core->name);
- cx_clear(MO_PCI_INTMSK,0x02);
+ cx_clear(MO_PCI_INTMSK, PCI_INT_AUDINT);
}
out:
@@ -306,14 +282,15 @@ static int dsp_buffer_free(snd_cx88_card_t *chip)
BUG_ON(!chip->dma_size);
dprintk(2,"Freeing buffer\n");
- videobuf_pci_dma_unmap(chip->pci, &chip->dma_risc);
- videobuf_dma_free(&chip->dma_risc);
+ videobuf_pci_dma_unmap(chip->pci, chip->dma_risc);
+ videobuf_dma_free(chip->dma_risc);
btcx_riscmem_free(chip->pci,&chip->buf->risc);
kfree(chip->buf);
+ chip->dma_risc = NULL;
chip->dma_size = 0;
- return 0;
+ return 0;
}
/****************************************************************************
@@ -323,6 +300,7 @@ static int dsp_buffer_free(snd_cx88_card_t *chip)
/*
* Digital hardware definition
*/
+#define DEFAULT_FIFO_SIZE 4096
static struct snd_pcm_hardware snd_cx88_digital_hw = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
@@ -333,22 +311,18 @@ static struct snd_pcm_hardware snd_cx88_digital_hw = {
.rates = SNDRV_PCM_RATE_48000,
.rate_min = 48000,
.rate_max = 48000,
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
- .buffer_bytes_max = (2*2048),
- .period_bytes_min = 2048,
- .period_bytes_max = 2048,
- .periods_min = 2,
- .periods_max = 2,
+ /* Analog audio output will be full of clicks and pops if there
+ are not exactly four lines in the SRAM FIFO buffer. */
+ .period_bytes_min = DEFAULT_FIFO_SIZE/4,
+ .period_bytes_max = DEFAULT_FIFO_SIZE/4,
+ .periods_min = 1,
+ .periods_max = 1024,
+ .buffer_bytes_max = (1024*1024),
};
/*
- * audio pcm capture runtime free
- */
-static void snd_card_cx88_runtime_free(struct snd_pcm_runtime *runtime)
-{
-}
-/*
* audio pcm capture open callback
*/
static int snd_cx88_pcm_open(struct snd_pcm_substream *substream)
@@ -357,26 +331,24 @@ static int snd_cx88_pcm_open(struct snd_pcm_substream *substream)
struct snd_pcm_runtime *runtime = substream->runtime;
int err;
- if (test_and_set_bit(0, &chip->opened))
- return -EBUSY;
-
- err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+ err = snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_PERIODS);
if (err < 0)
goto _error;
chip->substream = substream;
- chip->read_count = 0;
- chip->read_offset = 0;
-
- runtime->private_free = snd_card_cx88_runtime_free;
runtime->hw = snd_cx88_digital_hw;
+ if (cx88_sram_channels[SRAM_CH25].fifo_size != DEFAULT_FIFO_SIZE) {
+ unsigned int bpl = cx88_sram_channels[SRAM_CH25].fifo_size / 4;
+ bpl &= ~7; /* must be multiple of 8 */
+ runtime->hw.period_bytes_min = bpl;
+ runtime->hw.period_bytes_max = bpl;
+ }
+
return 0;
_error:
dprintk(1,"Error opening PCM!\n");
- clear_bit(0, &chip->opened);
- smp_mb__after_clear_bit();
return err;
}
@@ -385,11 +357,6 @@ _error:
*/
static int snd_cx88_close(struct snd_pcm_substream *substream)
{
- snd_cx88_card_t *chip = snd_pcm_substream_chip(substream);
-
- clear_bit(0, &chip->opened);
- smp_mb__after_clear_bit();
-
return 0;
}
@@ -400,55 +367,67 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream,
struct snd_pcm_hw_params * hw_params)
{
snd_cx88_card_t *chip = snd_pcm_substream_chip(substream);
+ struct videobuf_dmabuf *dma;
+
struct cx88_buffer *buf;
+ int ret;
if (substream->runtime->dma_area) {
dsp_buffer_free(chip);
substream->runtime->dma_area = NULL;
}
-
chip->period_size = params_period_bytes(hw_params);
chip->num_periods = params_periods(hw_params);
chip->dma_size = chip->period_size * params_periods(hw_params);
BUG_ON(!chip->dma_size);
+ BUG_ON(chip->num_periods & (chip->num_periods-1));
- dprintk(1,"Setting buffer\n");
-
- buf = kzalloc(sizeof(*buf),GFP_KERNEL);
+ buf = videobuf_pci_alloc(sizeof(*buf));
if (NULL == buf)
return -ENOMEM;
buf->vb.memory = V4L2_MEMORY_MMAP;
+ buf->vb.field = V4L2_FIELD_NONE;
buf->vb.width = chip->period_size;
+ buf->bpl = chip->period_size;
buf->vb.height = chip->num_periods;
buf->vb.size = chip->dma_size;
- buf->vb.field = V4L2_FIELD_NONE;
- videobuf_dma_init(&buf->vb.dma);
- videobuf_dma_init_kernel(&buf->vb.dma,PCI_DMA_FROMDEVICE,
+ dma=videobuf_to_dma(&buf->vb);
+ videobuf_dma_init(dma);
+ ret = videobuf_dma_init_kernel(dma, PCI_DMA_FROMDEVICE,
(PAGE_ALIGN(buf->vb.size) >> PAGE_SHIFT));
+ if (ret < 0)
+ goto error;
- videobuf_pci_dma_map(chip->pci,&buf->vb.dma);
+ ret = videobuf_pci_dma_map(chip->pci,dma);
+ if (ret < 0)
+ goto error;
+ ret = cx88_risc_databuffer(chip->pci, &buf->risc, dma->sglist,
+ buf->vb.width, buf->vb.height, 1);
+ if (ret < 0)
+ goto error;
- cx88_risc_databuffer(chip->pci, &buf->risc,
- buf->vb.dma.sglist,
- buf->vb.width, buf->vb.height);
-
- buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
+ /* Loop back to start of program */
+ buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP|RISC_IRQ1|RISC_CNT_INC);
buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
buf->vb.state = STATE_PREPARED;
- buf->bpl = chip->period_size;
chip->buf = buf;
- chip->dma_risc = buf->vb.dma;
+ chip->dma_risc = dma;
- dprintk(1,"Buffer ready at %u\n",chip->dma_risc.nr_pages);
- substream->runtime->dma_area = chip->dma_risc.vmalloc;
+ substream->runtime->dma_area = chip->dma_risc->vmalloc;
+ substream->runtime->dma_bytes = chip->dma_size;
+ substream->runtime->dma_addr = 0;
return 0;
+
+error:
+ kfree(buf);
+ return ret;
}
/*
@@ -475,7 +454,6 @@ static int snd_cx88_prepare(struct snd_pcm_substream *substream)
return 0;
}
-
/*
* trigger callback
*/
@@ -484,6 +462,7 @@ static int snd_cx88_card_trigger(struct snd_pcm_substream *substream, int cmd)
snd_cx88_card_t *chip = snd_pcm_substream_chip(substream);
int err;
+ /* Local interrupts are already disabled by ALSA */
spin_lock(&chip->reg_lock);
switch (cmd) {
@@ -510,17 +489,24 @@ static snd_pcm_uframes_t snd_cx88_pointer(struct snd_pcm_substream *substream)
{
snd_cx88_card_t *chip = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
+ u16 count;
- if (chip->read_count) {
- chip->read_count -= snd_pcm_lib_period_bytes(substream);
- chip->read_offset += snd_pcm_lib_period_bytes(substream);
- if (chip->read_offset == chip->dma_size)
- chip->read_offset = 0;
- }
+ count = atomic_read(&chip->count);
- dprintk(2, "Pointer time, will return %li, read %li\n",chip->read_offset,chip->read_count);
- return bytes_to_frames(runtime, chip->read_offset);
+// dprintk(2, "%s - count %d (+%u), period %d, frame %lu\n", __FUNCTION__,
+// count, new, count & (runtime->periods-1),
+// runtime->period_size * (count & (runtime->periods-1)));
+ return runtime->period_size * (count & (runtime->periods-1));
+}
+/*
+ * page callback (needed for mmap)
+ */
+static struct page *snd_cx88_page(struct snd_pcm_substream *substream,
+ unsigned long offset)
+{
+ void *pageptr = substream->runtime->dma_area + offset;
+ return vmalloc_to_page(pageptr);
}
/*
@@ -535,6 +521,7 @@ static struct snd_pcm_ops snd_cx88_pcm_ops = {
.prepare = snd_cx88_prepare,
.trigger = snd_cx88_card_trigger,
.pointer = snd_cx88_pointer,
+ .page = snd_cx88_page,
};
/*
@@ -562,7 +549,7 @@ static int snd_cx88_capture_volume_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *info)
{
info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- info->count = 1;
+ info->count = 2;
info->value.integer.min = 0;
info->value.integer.max = 0x3f;
@@ -575,8 +562,12 @@ static int snd_cx88_capture_volume_get(struct snd_kcontrol *kcontrol,
{
snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol);
struct cx88_core *core=chip->core;
+ int vol = 0x3f - (cx_read(AUD_VOL_CTL) & 0x3f),
+ bal = cx_read(AUD_BAL_CTL);
- value->value.integer.value[0] = 0x3f - (cx_read(AUD_VOL_CTL) & 0x3f);
+ value->value.integer.value[(bal & 0x40) ? 0 : 1] = vol;
+ vol -= (bal & 0x3f);
+ value->value.integer.value[(bal & 0x40) ? 1 : 0] = vol < 0 ? 0 : vol;
return 0;
}
@@ -587,16 +578,31 @@ static int snd_cx88_capture_volume_put(struct snd_kcontrol *kcontrol,
{
snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol);
struct cx88_core *core=chip->core;
- int v;
- u32 old_control;
-
+ int v, b;
+ int changed = 0;
+ u32 old;
+
+ b = value->value.integer.value[1] - value->value.integer.value[0];
+ if (b < 0) {
+ v = 0x3f - value->value.integer.value[0];
+ b = (-b) | 0x40;
+ } else {
+ v = 0x3f - value->value.integer.value[1];
+ }
+ /* Do we really know this will always be called with IRQs on? */
spin_lock_irq(&chip->reg_lock);
- old_control = 0x3f - (cx_read(AUD_VOL_CTL) & 0x3f);
- v = 0x3f - (value->value.integer.value[0] & 0x3f);
- cx_andor(AUD_VOL_CTL, 0x3f, v);
+ old = cx_read(AUD_VOL_CTL);
+ if (v != (old & 0x3f)) {
+ cx_write(AUD_VOL_CTL, (old & ~0x3f) | v);
+ changed = 1;
+ }
+ if (cx_read(AUD_BAL_CTL) != b) {
+ cx_write(AUD_BAL_CTL, b);
+ changed = 1;
+ }
spin_unlock_irq(&chip->reg_lock);
- return v != old_control;
+ return changed;
}
static struct snd_kcontrol_new snd_cx88_capture_volume = {
@@ -665,6 +671,7 @@ static int __devinit snd_cx88_create(struct snd_card *card,
snd_cx88_card_t *chip;
struct cx88_core *core;
int err;
+ unsigned char pci_lat;
*rchip = NULL;
@@ -709,13 +716,12 @@ static int __devinit snd_cx88_create(struct snd_card *card,
}
/* print pci info */
- pci_read_config_byte(pci, PCI_CLASS_REVISION, &chip->pci_rev);
- pci_read_config_byte(pci, PCI_LATENCY_TIMER, &chip->pci_lat);
+ pci_read_config_byte(pci, PCI_LATENCY_TIMER, &pci_lat);
dprintk(1,"ALSA %s/%i: found at %s, rev: %d, irq: %d, "
"latency: %d, mmio: 0x%llx\n", core->name, devno,
- pci_name(pci), chip->pci_rev, pci->irq,
- chip->pci_lat,(unsigned long long)pci_resource_start(pci,0));
+ pci_name(pci), pci->revision, pci->irq,
+ pci_lat, (unsigned long long)pci_resource_start(pci,0));
chip->irq = pci->irq;
synchronize_irq(chip->irq);
@@ -753,17 +759,12 @@ static int __devinit cx88_audio_initdev(struct pci_dev *pci,
return (err);
err = snd_cx88_pcm(chip, 0, "CX88 Digital");
-
- if (err < 0) {
- snd_card_free(card);
- return (err);
- }
+ if (err < 0)
+ goto error;
err = snd_ctl_add(card, snd_ctl_new1(&snd_cx88_capture_volume, chip));
- if (err < 0) {
- snd_card_free(card);
- return (err);
- }
+ if (err < 0)
+ goto error;
strcpy (card->driver, "CX88x");
sprintf(card->shortname, "Conexant CX%x", pci->device);
@@ -775,16 +776,16 @@ static int __devinit cx88_audio_initdev(struct pci_dev *pci,
card->driver,devno);
err = snd_card_register(card);
- if (err < 0) {
- snd_card_free(card);
- return (err);
- }
- snd_cx88_cards[devno] = card;
-
+ if (err < 0)
+ goto error;
pci_set_drvdata(pci,card);
devno++;
return 0;
+
+error:
+ snd_card_free(card);
+ return err;
}
/*
* ALSA destructor
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index f2fcdb92ecc..6d6f5048d76 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -27,7 +27,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/delay.h>
@@ -734,14 +733,14 @@ static int vidioc_querycap (struct file *file, void *priv,
struct cx88_core *core = dev->core;
strcpy(cap->driver, "cx88_blackbird");
- strlcpy(cap->card, cx88_boards[core->board].name,sizeof(cap->card));
+ strlcpy(cap->card, core->board.name, sizeof(cap->card));
sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci));
cap->version = CX88_VERSION_CODE;
cap->capabilities =
V4L2_CAP_VIDEO_CAPTURE |
V4L2_CAP_READWRITE |
V4L2_CAP_STREAMING;
- if (UNSET != core->tuner_type)
+ if (UNSET != core->board.tuner_type)
cap->capabilities |= V4L2_CAP_TUNER;
return 0;
}
@@ -877,7 +876,7 @@ static int vidioc_g_ext_ctrls (struct file *file, void *priv,
if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG)
return -EINVAL;
- return cx2341x_ext_ctrls(&dev->params, f, VIDIOC_G_EXT_CTRLS);
+ return cx2341x_ext_ctrls(&dev->params, 0, f, VIDIOC_G_EXT_CTRLS);
}
static int vidioc_s_ext_ctrls (struct file *file, void *priv,
@@ -890,7 +889,7 @@ static int vidioc_s_ext_ctrls (struct file *file, void *priv,
if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG)
return -EINVAL;
p = dev->params;
- err = cx2341x_ext_ctrls(&p, f, VIDIOC_S_EXT_CTRLS);
+ err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_S_EXT_CTRLS);
if (!err) {
err = cx2341x_update(dev, blackbird_mbox_func, &dev->params, &p);
dev->params = p;
@@ -908,7 +907,7 @@ static int vidioc_try_ext_ctrls (struct file *file, void *priv,
if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG)
return -EINVAL;
p = dev->params;
- err = cx2341x_ext_ctrls(&p, f, VIDIOC_TRY_EXT_CTRLS);
+ err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_TRY_EXT_CTRLS);
return err;
}
@@ -990,7 +989,7 @@ static int vidioc_g_frequency (struct file *file, void *priv,
struct cx8802_fh *fh = priv;
struct cx88_core *core = fh->dev->core;
- if (unlikely(UNSET == core->tuner_type))
+ if (unlikely(UNSET == core->board.tuner_type))
return -EINVAL;
f->type = V4L2_TUNER_ANALOG_TV;
@@ -1028,7 +1027,7 @@ static int vidioc_g_tuner (struct file *file, void *priv,
struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core;
u32 reg;
- if (unlikely(UNSET == core->tuner_type))
+ if (unlikely(UNSET == core->board.tuner_type))
return -EINVAL;
if (0 != t->index)
return -EINVAL;
@@ -1049,7 +1048,7 @@ static int vidioc_s_tuner (struct file *file, void *priv,
{
struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core;
- if (UNSET == core->tuner_type)
+ if (UNSET == core->board.tuner_type)
return -EINVAL;
if (0 != t->index)
return -EINVAL;
@@ -1078,7 +1077,7 @@ static int mpeg_open(struct inode *inode, struct file *file)
struct cx8802_driver *drv = NULL;
int err;
- dev = cx8802_get_device(inode);
+ dev = cx8802_get_device(inode);
dprintk( 1, "%s\n", __FUNCTION__);
@@ -1112,7 +1111,7 @@ static int mpeg_open(struct inode *inode, struct file *file)
file->private_data = fh;
fh->dev = dev;
- videobuf_queue_init(&fh->mpegq, &blackbird_qops,
+ videobuf_queue_pci_init(&fh->mpegq, &blackbird_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
@@ -1235,7 +1234,7 @@ static struct video_device cx8802_mpeg_template =
.vidioc_s_tuner = vidioc_s_tuner,
.vidioc_s_std = vidioc_s_std,
.tvnorms = CX88_NORMS,
- .current_norm = V4L2_STD_NTSC_M,
+ .current_norm = V4L2_STD_NTSC_M,
};
/* ------------------------------------------------------------------ */
@@ -1246,7 +1245,7 @@ static int cx8802_blackbird_advise_acquire(struct cx8802_driver *drv)
struct cx88_core *core = drv->core;
int err = 0;
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* By default, core setup will leave the cx22702 out of reset, on the bus.
* We left the hardware on power up with the cx22702 active.
@@ -1268,7 +1267,7 @@ static int cx8802_blackbird_advise_release(struct cx8802_driver *drv)
struct cx88_core *core = drv->core;
int err = 0;
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Exit leaving the cx23416 on the bus */
break;
@@ -1316,13 +1315,13 @@ static int cx8802_blackbird_probe(struct cx8802_driver *drv)
dprintk( 1, "%s\n", __FUNCTION__);
dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
- core->board,
+ core->boardnr,
core->name,
core->pci_bus,
core->pci_slot);
err = -ENODEV;
- if (!(cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD))
+ if (!(core->board.mpeg & CX88_MPEG_BLACKBIRD))
goto fail_core;
dev->width = 720;
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 6a136ddbccf..a4eb6a87a76 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -27,10 +27,26 @@
#include "cx88.h"
+static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+static unsigned int card[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+
+module_param_array(tuner, int, NULL, 0444);
+module_param_array(radio, int, NULL, 0444);
+module_param_array(card, int, NULL, 0444);
+
+MODULE_PARM_DESC(tuner,"tuner type");
+MODULE_PARM_DESC(radio,"radio tuner type");
+MODULE_PARM_DESC(card,"card type");
+
+static unsigned int latency = UNSET;
+module_param(latency,int,0444);
+MODULE_PARM_DESC(latency,"pci latency timer");
+
/* ------------------------------------------------------------------ */
/* board config info */
-struct cx88_board cx88_boards[] = {
+static const struct cx88_board cx88_boards[] = {
[CX88_BOARD_UNKNOWN] = {
.name = "UNKNOWN/GENERIC",
.tuner_type = UNSET,
@@ -575,35 +591,34 @@ struct cx88_board cx88_boards[] = {
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
+ /* GPIO[2] = audio source for analog audio out connector
+ * 0 = analog audio input connector
+ * 1 = CX88 audio DACs
+ *
+ * GPIO[7] = input to CX88's audio/chroma ADC
+ * 0 = FM 10.7 MHz IF
+ * 1 = Sound 4.5 MHz IF
+ *
+ * GPIO[1,5,6] = Oren 51132 pins 27,35,28 respectively
+ *
+ * GPIO[16] = Remote control input
+ */
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x00008484,
- .gpio1 = 0x00000000,
- .gpio2 = 0x00000000,
- .gpio3 = 0x00000000,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x00008400,
- .gpio1 = 0x00000000,
- .gpio2 = 0x00000000,
- .gpio3 = 0x00000000,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x00008400,
- .gpio1 = 0x00000000,
- .gpio2 = 0x00000000,
- .gpio3 = 0x00000000,
}},
.radio = {
.type = CX88_RADIO,
- .vmux = 2,
- .gpio0 = 0x00008400,
- .gpio1 = 0x00000000,
- .gpio2 = 0x00000000,
- .gpio3 = 0x00000000,
+ .gpio0 = 0x00008404,
},
.mpeg = CX88_MPEG_DVB,
},
@@ -1356,12 +1371,11 @@ struct cx88_board cx88_boards[] = {
}},
},
};
-const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
/* ------------------------------------------------------------------ */
/* PCI subsystem IDs */
-struct cx88_subid cx88_subids[] = {
+static const struct cx88_subid cx88_subids[] = {
{
.subvendor = 0x0070,
.subdevice = 0x3400,
@@ -1667,7 +1681,6 @@ struct cx88_subid cx88_subids[] = {
.card = CX88_BOARD_ADSTECH_PTV_390,
},
};
-const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
/* ----------------------------------------------------------------------- */
/* some leadtek specific stuff */
@@ -1688,12 +1701,12 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
return;
}
- core->has_radio = 1;
- core->tuner_type = (eeprom_data[6] == 0x13) ? 43 : 38;
+ core->board.tuner_type = (eeprom_data[6] == 0x13) ?
+ TUNER_PHILIPS_FM1236_MK3 : TUNER_PHILIPS_FM1216ME_MK3;
printk(KERN_INFO "%s: Leadtek Winfast 2000XP Expert config: "
"tuner=%d, eeprom[0]=0x%02x\n",
- core->name, core->tuner_type, eeprom_data[0]);
+ core->name, core->board.tuner_type, eeprom_data[0]);
}
static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
@@ -1701,9 +1714,9 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
struct tveeprom tv;
tveeprom_hauppauge_analog(&core->i2c_client, &tv, eeprom_data);
- core->tuner_type = tv.tuner_type;
+ core->board.tuner_type = tv.tuner_type;
core->tuner_formats = tv.tuner_formats;
- core->has_radio = tv.has_radio;
+ core->board.radio.type = tv.has_radio ? CX88_RADIO : 0;
/* Make sure we support the board model */
switch (tv.model)
@@ -1793,8 +1806,9 @@ static void gdi_eeprom(struct cx88_core *core, u8 *eeprom_data)
name ? name : "unknown");
if (NULL == name)
return;
- core->tuner_type = gdi_tuner[eeprom_data[0x0d]].id;
- core->has_radio = gdi_tuner[eeprom_data[0x0d]].fm;
+ core->board.tuner_type = gdi_tuner[eeprom_data[0x0d]].id;
+ core->board.radio.type = gdi_tuner[eeprom_data[0x0d]].fm ?
+ CX88_RADIO : 0;
}
/* ----------------------------------------------------------------------- */
@@ -1833,7 +1847,7 @@ static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core)
/* ----------------------------------------------------------------------- */
-void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
+static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
{
int i;
@@ -1854,14 +1868,14 @@ void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
}
printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
core->name);
- for (i = 0; i < cx88_bcount; i++)
+ for (i = 0; i < ARRAY_SIZE(cx88_boards); i++)
printk("%s: card=%d -> %s\n",
core->name, i, cx88_boards[i].name);
}
-void cx88_card_setup_pre_i2c(struct cx88_core *core)
+static void cx88_card_setup_pre_i2c(struct cx88_core *core)
{
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Bring the 702 demod up before i2c scanning/attach or devices are hidden */
/* We leave here with the 702 on the bus */
@@ -1875,7 +1889,7 @@ void cx88_card_setup_pre_i2c(struct cx88_core *core)
}
}
-void cx88_card_setup(struct cx88_core *core)
+static void cx88_card_setup(struct cx88_core *core)
{
static u8 eeprom[256];
@@ -1884,7 +1898,7 @@ void cx88_card_setup(struct cx88_core *core)
tveeprom_read(&core->i2c_client,eeprom,sizeof(eeprom));
}
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE:
case CX88_BOARD_HAUPPAUGE_ROSLYN:
if (0 == core->i2c_rc)
@@ -1928,7 +1942,7 @@ void cx88_card_setup(struct cx88_core *core)
msleep(1);
cx_set(MO_GP0_IO, 0x00000101);
if (0 == core->i2c_rc &&
- core->board == CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID)
+ core->boardnr == CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID)
dvico_fusionhdtv_hybrid_init(core);
break;
case CX88_BOARD_KWORLD_DVB_T:
@@ -1966,13 +1980,148 @@ void cx88_card_setup(struct cx88_core *core)
}
break;
}
- if (cx88_boards[core->board].radio.type == CX88_RADIO)
- core->has_radio = 1;
}
/* ------------------------------------------------------------------ */
-EXPORT_SYMBOL(cx88_boards);
+static int cx88_pci_quirks(const char *name, struct pci_dev *pci)
+{
+ unsigned int lat = UNSET;
+ u8 ctrl = 0;
+ u8 value;
+
+ /* check pci quirks */
+ if (pci_pci_problems & PCIPCI_TRITON) {
+ printk(KERN_INFO "%s: quirk: PCIPCI_TRITON -- set TBFX\n",
+ name);
+ ctrl |= CX88X_EN_TBFX;
+ }
+ if (pci_pci_problems & PCIPCI_NATOMA) {
+ printk(KERN_INFO "%s: quirk: PCIPCI_NATOMA -- set TBFX\n",
+ name);
+ ctrl |= CX88X_EN_TBFX;
+ }
+ if (pci_pci_problems & PCIPCI_VIAETBF) {
+ printk(KERN_INFO "%s: quirk: PCIPCI_VIAETBF -- set TBFX\n",
+ name);
+ ctrl |= CX88X_EN_TBFX;
+ }
+ if (pci_pci_problems & PCIPCI_VSFX) {
+ printk(KERN_INFO "%s: quirk: PCIPCI_VSFX -- set VSFX\n",
+ name);
+ ctrl |= CX88X_EN_VSFX;
+ }
+#ifdef PCIPCI_ALIMAGIK
+ if (pci_pci_problems & PCIPCI_ALIMAGIK) {
+ printk(KERN_INFO "%s: quirk: PCIPCI_ALIMAGIK -- latency fixup\n",
+ name);
+ lat = 0x0A;
+ }
+#endif
+
+ /* check insmod options */
+ if (UNSET != latency)
+ lat = latency;
+
+ /* apply stuff */
+ if (ctrl) {
+ pci_read_config_byte(pci, CX88X_DEVCTRL, &value);
+ value |= ctrl;
+ pci_write_config_byte(pci, CX88X_DEVCTRL, value);
+ }
+ if (UNSET != lat) {
+ printk(KERN_INFO "%s: setting pci latency timer to %d\n",
+ name, latency);
+ pci_write_config_byte(pci, PCI_LATENCY_TIMER, latency);
+ }
+ return 0;
+}
+
+int cx88_get_resources(const struct cx88_core *core, struct pci_dev *pci)
+{
+ if (request_mem_region(pci_resource_start(pci,0),
+ pci_resource_len(pci,0),
+ core->name))
+ return 0;
+ printk(KERN_ERR
+ "%s/%d: Can't get MMIO memory @ 0x%llx, subsystem: %04x:%04x\n",
+ core->name, PCI_FUNC(pci->devfn),
+ (unsigned long long)pci_resource_start(pci, 0),
+ pci->subsystem_vendor, pci->subsystem_device);
+ return -EBUSY;
+}
+
+/* Allocate and initialize the cx88 core struct. One should hold the
+ * devlist mutex before calling this. */
+struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
+{
+ struct cx88_core *core;
+ int i;
+
+ core = kzalloc(sizeof(*core), GFP_KERNEL);
+
+ atomic_inc(&core->refcount);
+ core->pci_bus = pci->bus->number;
+ core->pci_slot = PCI_SLOT(pci->devfn);
+ core->pci_irqmask = PCI_INT_RISC_RD_BERRINT | PCI_INT_RISC_WR_BERRINT |
+ PCI_INT_BRDG_BERRINT | PCI_INT_SRC_DMA_BERRINT |
+ PCI_INT_DST_DMA_BERRINT | PCI_INT_IPB_DMA_BERRINT;
+ mutex_init(&core->lock);
+
+ core->nr = nr;
+ sprintf(core->name, "cx88[%d]", core->nr);
+ if (0 != cx88_get_resources(core, pci)) {
+ kfree(core);
+ return NULL;
+ }
+
+ /* PCI stuff */
+ cx88_pci_quirks(core->name, pci);
+ core->lmmio = ioremap(pci_resource_start(pci, 0),
+ pci_resource_len(pci, 0));
+ core->bmmio = (u8 __iomem *)core->lmmio;
+
+ /* board config */
+ core->boardnr = UNSET;
+ if (card[core->nr] < ARRAY_SIZE(cx88_boards))
+ core->boardnr = card[core->nr];
+ for (i = 0; UNSET == core->boardnr && i < ARRAY_SIZE(cx88_subids); i++)
+ if (pci->subsystem_vendor == cx88_subids[i].subvendor &&
+ pci->subsystem_device == cx88_subids[i].subdevice)
+ core->boardnr = cx88_subids[i].card;
+ if (UNSET == core->boardnr) {
+ core->boardnr = CX88_BOARD_UNKNOWN;
+ cx88_card_list(core, pci);
+ }
+
+ memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board));
+
+ printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+ core->name,pci->subsystem_vendor,
+ pci->subsystem_device, core->board.name,
+ core->boardnr, card[core->nr] == core->boardnr ?
+ "insmod option" : "autodetected");
+
+ if (tuner[core->nr] != UNSET)
+ core->board.tuner_type = tuner[core->nr];
+ if (radio[core->nr] != UNSET)
+ core->board.radio_type = radio[core->nr];
+
+ printk(KERN_INFO "%s: TV tuner type %d, Radio tuner type %d\n",
+ core->name, core->board.tuner_type, core->board.radio_type);
+
+ /* init hardware */
+ cx88_reset(core);
+ cx88_card_setup_pre_i2c(core);
+ cx88_i2c_init(core, pci);
+ cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
+ cx88_card_setup(core);
+ cx88_ir_init(core, pci);
+
+ return core;
+}
+
+/* ------------------------------------------------------------------ */
/*
* Local variables:
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index f31ec96924b..62e8dd24c5f 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -28,7 +28,6 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/kmod.h>
@@ -52,22 +51,6 @@ static unsigned int core_debug = 0;
module_param(core_debug,int,0644);
MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
-static unsigned int latency = UNSET;
-module_param(latency,int,0444);
-MODULE_PARM_DESC(latency,"pci latency timer");
-
-static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
-static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
-static unsigned int card[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
-
-module_param_array(tuner, int, NULL, 0444);
-module_param_array(radio, int, NULL, 0444);
-module_param_array(card, int, NULL, 0444);
-
-MODULE_PARM_DESC(tuner,"tuner type");
-MODULE_PARM_DESC(radio,"radio tuner type");
-MODULE_PARM_DESC(card,"card type");
-
static unsigned int nicam = 0;
module_param(nicam,int,0644);
MODULE_PARM_DESC(nicam,"tv audio is nicam");
@@ -85,13 +68,15 @@ static DEFINE_MUTEX(devlist);
#define NO_SYNC_LINE (-1U)
+/* @lpi: lines per IRQ, or 0 to not generate irqs. Note: IRQ to be
+ generated _after_ lpi lines are transferred. */
static u32* cx88_risc_field(u32 *rp, struct scatterlist *sglist,
unsigned int offset, u32 sync_line,
unsigned int bpl, unsigned int padding,
- unsigned int lines)
+ unsigned int lines, unsigned int lpi)
{
struct scatterlist *sg;
- unsigned int line,todo;
+ unsigned int line,todo,sol;
/* sync instruction */
if (sync_line != NO_SYNC_LINE)
@@ -104,15 +89,19 @@ static u32* cx88_risc_field(u32 *rp, struct scatterlist *sglist,
offset -= sg_dma_len(sg);
sg++;
}
+ if (lpi && line>0 && !(line % lpi))
+ sol = RISC_SOL | RISC_IRQ1 | RISC_CNT_INC;
+ else
+ sol = RISC_SOL;
if (bpl <= sg_dma_len(sg)-offset) {
/* fits into current chunk */
- *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL|RISC_EOL|bpl);
+ *(rp++)=cpu_to_le32(RISC_WRITE|sol|RISC_EOL|bpl);
*(rp++)=cpu_to_le32(sg_dma_address(sg)+offset);
offset+=bpl;
} else {
/* scanline needs to be split */
todo = bpl;
- *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL|
+ *(rp++)=cpu_to_le32(RISC_WRITE|sol|
(sg_dma_len(sg)-offset));
*(rp++)=cpu_to_le32(sg_dma_address(sg)+offset);
todo -= (sg_dma_len(sg)-offset);
@@ -163,10 +152,10 @@ int cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc,
rp = risc->cpu;
if (UNSET != top_offset)
rp = cx88_risc_field(rp, sglist, top_offset, 0,
- bpl, padding, lines);
+ bpl, padding, lines, 0);
if (UNSET != bottom_offset)
rp = cx88_risc_field(rp, sglist, bottom_offset, 0x200,
- bpl, padding, lines);
+ bpl, padding, lines, 0);
/* save pointer to jmp instruction address */
risc->jmp = rp;
@@ -176,7 +165,7 @@ int cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc,
int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc,
struct scatterlist *sglist, unsigned int bpl,
- unsigned int lines)
+ unsigned int lines, unsigned int lpi)
{
u32 instructions;
u32 *rp;
@@ -193,7 +182,7 @@ int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc,
/* write risc instructions */
rp = risc->cpu;
- rp = cx88_risc_field(rp, sglist, 0, NO_SYNC_LINE, bpl, 0, lines);
+ rp = cx88_risc_field(rp, sglist, 0, NO_SYNC_LINE, bpl, 0, lines, lpi);
/* save pointer to jmp instruction address */
risc->jmp = rp;
@@ -224,10 +213,12 @@ int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
void
cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf)
{
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+
BUG_ON(in_interrupt());
videobuf_waiton(&buf->vb,0,0);
- videobuf_dma_unmap(q, &buf->vb.dma);
- videobuf_dma_free(&buf->vb.dma);
+ videobuf_dma_unmap(q, dma);
+ videobuf_dma_free(dma);
btcx_riscmem_free((struct pci_dev *)q->dev, &buf->risc);
buf->vb.state = STATE_NEEDS_INIT;
}
@@ -451,10 +442,13 @@ void cx88_sram_channel_dump(struct cx88_core *core,
printk("%s: cmds: %-12s: 0x%08x\n",
core->name,name[i],
cx_read(ch->cmds_start + 4*i));
- for (i = 0; i < 4; i++) {
+ for (n = 1, i = 0; i < 4; i++) {
risc = cx_read(ch->cmds_start + 4 * (i+11));
printk("%s: risc%d: ", core->name, i);
- cx88_risc_decode(risc);
+ if (--n)
+ printk("0x%08x [ arg #%d ]\n", risc, n);
+ else
+ n = cx88_risc_decode(risc);
}
for (i = 0; i < 16; i += n) {
risc = cx_read(ch->ctrl_start + 4 * i);
@@ -514,7 +508,7 @@ int cx88_core_irq(struct cx88_core *core, u32 status)
{
int handled = 0;
- if (status & (1<<18)) {
+ if (status & PCI_INT_IR_SMPINT) {
cx88_ir_irq(core);
handled++;
}
@@ -738,7 +732,7 @@ int cx88_set_scale(struct cx88_core *core, unsigned int width, unsigned int heig
value |= (1 << 15);
value |= (1 << 16);
}
- if (INPUT(core->input)->type == CX88_VMUX_SVIDEO)
+ if (INPUT(core->input).type == CX88_VMUX_SVIDEO)
value |= (1 << 13) | (1 << 5);
if (V4L2_FIELD_INTERLACED == field)
value |= (1 << 3); // VINT (interlaced vertical scaling)
@@ -833,7 +827,7 @@ static int set_tvaudio(struct cx88_core *core)
{
v4l2_std_id norm = core->tvnorm;
- if (CX88_VMUX_TELEVISION != INPUT(core->input)->type)
+ if (CX88_VMUX_TELEVISION != INPUT(core->input).type)
return 0;
if (V4L2_STD_PAL_BG & norm) {
@@ -997,61 +991,6 @@ int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm)
/* ------------------------------------------------------------------ */
-static int cx88_pci_quirks(char *name, struct pci_dev *pci)
-{
- unsigned int lat = UNSET;
- u8 ctrl = 0;
- u8 value;
-
- /* check pci quirks */
- if (pci_pci_problems & PCIPCI_TRITON) {
- printk(KERN_INFO "%s: quirk: PCIPCI_TRITON -- set TBFX\n",
- name);
- ctrl |= CX88X_EN_TBFX;
- }
- if (pci_pci_problems & PCIPCI_NATOMA) {
- printk(KERN_INFO "%s: quirk: PCIPCI_NATOMA -- set TBFX\n",
- name);
- ctrl |= CX88X_EN_TBFX;
- }
- if (pci_pci_problems & PCIPCI_VIAETBF) {
- printk(KERN_INFO "%s: quirk: PCIPCI_VIAETBF -- set TBFX\n",
- name);
- ctrl |= CX88X_EN_TBFX;
- }
- if (pci_pci_problems & PCIPCI_VSFX) {
- printk(KERN_INFO "%s: quirk: PCIPCI_VSFX -- set VSFX\n",
- name);
- ctrl |= CX88X_EN_VSFX;
- }
-#ifdef PCIPCI_ALIMAGIK
- if (pci_pci_problems & PCIPCI_ALIMAGIK) {
- printk(KERN_INFO "%s: quirk: PCIPCI_ALIMAGIK -- latency fixup\n",
- name);
- lat = 0x0A;
- }
-#endif
-
- /* check insmod options */
- if (UNSET != latency)
- lat = latency;
-
- /* apply stuff */
- if (ctrl) {
- pci_read_config_byte(pci, CX88X_DEVCTRL, &value);
- value |= ctrl;
- pci_write_config_byte(pci, CX88X_DEVCTRL, value);
- }
- if (UNSET != lat) {
- printk(KERN_INFO "%s: setting pci latency timer to %d\n",
- name, latency);
- pci_write_config_byte(pci, PCI_LATENCY_TIMER, latency);
- }
- return 0;
-}
-
-/* ------------------------------------------------------------------ */
-
struct video_device *cx88_vdev_init(struct cx88_core *core,
struct pci_dev *pci,
struct video_device *template,
@@ -1067,122 +1006,38 @@ struct video_device *cx88_vdev_init(struct cx88_core *core,
vfd->dev = &pci->dev;
vfd->release = video_device_release;
snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
- core->name, type, cx88_boards[core->board].name);
+ core->name, type, core->board.name);
return vfd;
}
-static int get_ressources(struct cx88_core *core, struct pci_dev *pci)
-{
- if (request_mem_region(pci_resource_start(pci,0),
- pci_resource_len(pci,0),
- core->name))
- return 0;
- printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n",
- core->name,(unsigned long long)pci_resource_start(pci,0));
- return -EBUSY;
-}
-
struct cx88_core* cx88_core_get(struct pci_dev *pci)
{
struct cx88_core *core;
- struct list_head *item;
- int i;
mutex_lock(&devlist);
- list_for_each(item,&cx88_devlist) {
- core = list_entry(item, struct cx88_core, devlist);
+ list_for_each_entry(core, &cx88_devlist, devlist) {
if (pci->bus->number != core->pci_bus)
continue;
if (PCI_SLOT(pci->devfn) != core->pci_slot)
continue;
- if (0 != get_ressources(core,pci))
- goto fail_unlock;
+ if (0 != cx88_get_resources(core, pci)) {
+ mutex_unlock(&devlist);
+ return NULL;
+ }
atomic_inc(&core->refcount);
mutex_unlock(&devlist);
return core;
}
- core = kzalloc(sizeof(*core),GFP_KERNEL);
- if (NULL == core)
- goto fail_unlock;
-
- atomic_inc(&core->refcount);
- core->pci_bus = pci->bus->number;
- core->pci_slot = PCI_SLOT(pci->devfn);
- core->pci_irqmask = 0x00fc00;
- mutex_init(&core->lock);
-
- core->nr = cx88_devcount++;
- sprintf(core->name,"cx88[%d]",core->nr);
- if (0 != get_ressources(core,pci)) {
- printk(KERN_ERR "CORE %s No more PCI ressources for "
- "subsystem: %04x:%04x, board: %s\n",
- core->name,pci->subsystem_vendor,
- pci->subsystem_device,
- cx88_boards[core->board].name);
-
- cx88_devcount--;
- goto fail_free;
- }
- list_add_tail(&core->devlist,&cx88_devlist);
-
- /* PCI stuff */
- cx88_pci_quirks(core->name, pci);
- core->lmmio = ioremap(pci_resource_start(pci,0),
- pci_resource_len(pci,0));
- core->bmmio = (u8 __iomem *)core->lmmio;
-
- /* board config */
- core->board = UNSET;
- if (card[core->nr] < cx88_bcount)
- core->board = card[core->nr];
- for (i = 0; UNSET == core->board && i < cx88_idcount; i++)
- if (pci->subsystem_vendor == cx88_subids[i].subvendor &&
- pci->subsystem_device == cx88_subids[i].subdevice)
- core->board = cx88_subids[i].card;
- if (UNSET == core->board) {
- core->board = CX88_BOARD_UNKNOWN;
- cx88_card_list(core,pci);
+
+ core = cx88_core_create(pci, cx88_devcount);
+ if (NULL != core) {
+ cx88_devcount++;
+ list_add_tail(&core->devlist, &cx88_devlist);
}
- printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
- core->name,pci->subsystem_vendor,
- pci->subsystem_device,cx88_boards[core->board].name,
- core->board, card[core->nr] == core->board ?
- "insmod option" : "autodetected");
-
- core->tuner_type = tuner[core->nr];
- core->radio_type = radio[core->nr];
- if (UNSET == core->tuner_type)
- core->tuner_type = cx88_boards[core->board].tuner_type;
- if (UNSET == core->radio_type)
- core->radio_type = cx88_boards[core->board].radio_type;
- if (!core->tuner_addr)
- core->tuner_addr = cx88_boards[core->board].tuner_addr;
- if (!core->radio_addr)
- core->radio_addr = cx88_boards[core->board].radio_addr;
-
- printk(KERN_INFO "TV tuner %d at 0x%02x, Radio tuner %d at 0x%02x\n",
- core->tuner_type, core->tuner_addr<<1,
- core->radio_type, core->radio_addr<<1);
-
- core->tda9887_conf = cx88_boards[core->board].tda9887_conf;
-
- /* init hardware */
- cx88_reset(core);
- cx88_card_setup_pre_i2c(core);
- cx88_i2c_init(core,pci);
- cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
- cx88_card_setup(core);
- cx88_ir_init(core,pci);
mutex_unlock(&devlist);
return core;
-
-fail_free:
- kfree(core);
-fail_unlock:
- mutex_unlock(&devlist);
- return NULL;
}
void cx88_core_put(struct cx88_core *core, struct pci_dev *pci)
@@ -1229,6 +1084,9 @@ EXPORT_SYMBOL(cx88_vdev_init);
EXPORT_SYMBOL(cx88_core_get);
EXPORT_SYMBOL(cx88_core_put);
+EXPORT_SYMBOL(cx88_ir_start);
+EXPORT_SYMBOL(cx88_ir_stop);
+
/*
* Local variables:
* c-basic-offset: 8
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index 1773b40467d..d16e5c6d21c 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -378,7 +378,7 @@ static int dvb_register(struct cx8802_dev *dev)
dev->ts_gen_cntrl = 0x0c;
/* init frontend */
- switch (dev->core->board) {
+ switch (dev->core->boardnr) {
case CX88_BOARD_HAUPPAUGE_DVB_T1:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
@@ -482,7 +482,7 @@ static int dvb_register(struct cx8802_dev *dev)
&dev->core->i2c_adap, DVB_PLL_FMD1216ME);
}
#else
- printk("%s: built without vp3054 support\n", dev->core->name);
+ printk(KERN_ERR "%s/2: built without vp3054 support\n", dev->core->name);
#endif
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
@@ -625,12 +625,12 @@ static int dvb_register(struct cx8802_dev *dev)
}
break;
default:
- printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
+ printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->core->name);
break;
}
if (NULL == dev->dvb.frontend) {
- printk("%s: frontend initialization failed\n",dev->core->name);
+ printk(KERN_ERR "%s/2: frontend initialization failed\n", dev->core->name);
return -1;
}
@@ -653,7 +653,7 @@ static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
int err = 0;
dprintk( 1, "%s\n", __FUNCTION__);
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* We arrive here with either the cx23416 or the cx22702
* on the bus. Take the bus from the cx23416 and enable the
@@ -676,7 +676,7 @@ static int cx8802_dvb_advise_release(struct cx8802_driver *drv)
int err = 0;
dprintk( 1, "%s\n", __FUNCTION__);
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Do Nothing, leave the cx22702 on the bus. */
break;
@@ -694,13 +694,13 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
dprintk( 1, "%s\n", __FUNCTION__);
dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
- core->board,
+ core->boardnr,
core->name,
core->pci_bus,
core->pci_slot);
err = -ENODEV;
- if (!(cx88_boards[core->board].mpeg & CX88_MPEG_DVB))
+ if (!(core->board.mpeg & CX88_MPEG_DVB))
goto fail_core;
/* If vp3054 isn't enabled, a stub will just return 0 */
@@ -709,8 +709,8 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
goto fail_core;
/* dvb stuff */
- printk("%s/2: cx2388x based dvb card\n", core->name);
- videobuf_queue_init(&dev->dvb.dvbq, &dvb_qops,
+ printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name);
+ videobuf_queue_pci_init(&dev->dvb.dvbq, &dvb_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_TOP,
@@ -718,7 +718,8 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
dev);
err = dvb_register(dev);
if (err != 0)
- printk("%s dvb_register failed err = %d\n", __FUNCTION__, err);
+ printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n",
+ core->name, err);
fail_core:
return err;
@@ -747,7 +748,7 @@ static struct cx8802_driver cx8802_dvb_driver = {
static int dvb_init(void)
{
- printk(KERN_INFO "cx2388x dvb driver version %d.%d.%d loaded\n",
+ printk(KERN_INFO "cx88/2: cx2388x dvb driver version %d.%d.%d loaded\n",
(CX88_VERSION_CODE >> 16) & 0xff,
(CX88_VERSION_CODE >> 8) & 0xff,
CX88_VERSION_CODE & 0xff);
diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index 78bbcfab967..c8b1c50625f 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -28,7 +28,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <asm/io.h>
@@ -108,28 +107,28 @@ static int attach_inform(struct i2c_client *client)
if (!client->driver->command)
return 0;
- if (core->radio_type != UNSET) {
- if ((core->radio_addr==ADDR_UNSET)||(core->radio_addr==client->addr)) {
+ if (core->board.radio_type != UNSET) {
+ if ((core->board.radio_addr==ADDR_UNSET)||(core->board.radio_addr==client->addr)) {
tun_setup.mode_mask = T_RADIO;
- tun_setup.type = core->radio_type;
- tun_setup.addr = core->radio_addr;
+ tun_setup.type = core->board.radio_type;
+ tun_setup.addr = core->board.radio_addr;
client->driver->command (client, TUNER_SET_TYPE_ADDR, &tun_setup);
}
}
- if (core->tuner_type != UNSET) {
- if ((core->tuner_addr==ADDR_UNSET)||(core->tuner_addr==client->addr)) {
+ if (core->board.tuner_type != UNSET) {
+ if ((core->board.tuner_addr==ADDR_UNSET)||(core->board.tuner_addr==client->addr)) {
tun_setup.mode_mask = T_ANALOG_TV;
- tun_setup.type = core->tuner_type;
- tun_setup.addr = core->tuner_addr;
+ tun_setup.type = core->board.tuner_type;
+ tun_setup.addr = core->board.tuner_addr;
client->driver->command (client,TUNER_SET_TYPE_ADDR, &tun_setup);
}
}
- if (core->tda9887_conf)
- client->driver->command(client, TDA9887_SET_CONFIG, &core->tda9887_conf);
+ if (core->board.tda9887_conf)
+ client->driver->command(client, TDA9887_SET_CONFIG, &core->board.tda9887_conf);
return 0;
}
@@ -146,7 +145,7 @@ void cx88_call_i2c_clients(struct cx88_core *core, unsigned int cmd, void *arg)
if (0 != core->i2c_rc)
return;
-#if defined(CONFIG_VIDEO_BUF_DVB) || defined(CONFIG_VIDEO_BUF_DVB_MODULE)
+#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
if ( (core->dvbdev) && (core->dvbdev->dvb.frontend) ) {
if (core->dvbdev->dvb.frontend->ops.i2c_gate_ctrl)
core->dvbdev->dvb.frontend->ops.i2c_gate_ctrl(core->dvbdev->dvb.frontend, 1);
@@ -204,9 +203,9 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci)
memcpy(&core->i2c_algo, &cx8800_i2c_algo_template,
sizeof(core->i2c_algo));
- if (core->tuner_type != TUNER_ABSENT)
+ if (core->board.tuner_type != TUNER_ABSENT)
core->i2c_adap.class |= I2C_CLASS_TV_ANALOG;
- if (cx88_boards[core->board].mpeg & CX88_MPEG_DVB)
+ if (core->board.mpeg & CX88_MPEG_DVB)
core->i2c_adap.class |= I2C_CLASS_TV_DIGITAL;
core->i2c_adap.dev.parent = &pci->dev;
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index f5d4a565346..e52de3968c6 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -27,7 +27,6 @@
#include <linux/input.h>
#include <linux/pci.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include "cx88.h"
#include <media/ir-common.h>
@@ -74,7 +73,7 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
/* read gpio value */
gpio = cx_read(ir->gpio_addr);
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_NPGTECH_REALTV_TOP10FM:
/* This board apparently uses a combination of 2 GPIO
to represent the keys. Additionally, the second GPIO
@@ -113,7 +112,7 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
(gpio & ir->mask_keydown) ? " down" : "",
(gpio & ir->mask_keyup) ? " up" : "");
- if (ir->core->board == CX88_BOARD_NORWOOD_MICRO) {
+ if (ir->core->boardnr == CX88_BOARD_NORWOOD_MICRO) {
u32 gpio_key = cx_read(MO_GP0_IO);
data = (data << 4) | ((gpio_key & 0xf0) >> 4);
@@ -159,7 +158,7 @@ static void cx88_ir_work(struct work_struct *work)
mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
}
-static void cx88_ir_start(struct cx88_core *core, struct cx88_IR *ir)
+void cx88_ir_start(struct cx88_core *core, struct cx88_IR *ir)
{
if (ir->polling) {
setup_timer(&ir->timer, ir_timer, (unsigned long)ir);
@@ -167,17 +166,17 @@ static void cx88_ir_start(struct cx88_core *core, struct cx88_IR *ir)
schedule_work(&ir->work);
}
if (ir->sampling) {
- core->pci_irqmask |= (1 << 18); /* IR_SMP_INT */
+ core->pci_irqmask |= PCI_INT_IR_SMPINT;
cx_write(MO_DDS_IO, 0xa80a80); /* 4 kHz sample rate */
cx_write(MO_DDSCFG_IO, 0x5); /* enable */
}
}
-static void cx88_ir_stop(struct cx88_core *core, struct cx88_IR *ir)
+void cx88_ir_stop(struct cx88_core *core, struct cx88_IR *ir)
{
if (ir->sampling) {
cx_write(MO_DDSCFG_IO, 0x0);
- core->pci_irqmask &= ~(1 << 18);
+ core->pci_irqmask &= ~PCI_INT_IR_SMPINT;
}
if (ir->polling) {
@@ -204,7 +203,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
ir->input = input_dev;
/* detect & configure */
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_DNTV_LIVE_DVB_T:
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_KWORLD_DVB_T_CX22702:
@@ -314,8 +313,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
}
/* init input device */
- snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)",
- cx88_boards[core->board].name);
+ snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
@@ -406,7 +404,7 @@ void cx88_ir_irq(struct cx88_core *core)
ir_dump_samples(ir->samples, ir->scount);
/* decode it */
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
ircode = ir_decode_pulsedistance(ir->samples, ir->scount, 1, 4);
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index da7a6b591a6..a652f294d23 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -23,12 +23,10 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
#include <asm/delay.h>
#include "cx88.h"
@@ -56,9 +54,9 @@ static void request_module_async(struct work_struct *work)
{
struct cx8802_dev *dev=container_of(work, struct cx8802_dev, request_module_wk);
- if (cx88_boards[dev->core->board].mpeg & CX88_MPEG_DVB)
+ if (dev->core->board.mpeg & CX88_MPEG_DVB)
request_module("cx88-dvb");
- if (cx88_boards[dev->core->board].mpeg & CX88_MPEG_BLACKBIRD)
+ if (dev->core->board.mpeg & CX88_MPEG_BLACKBIRD)
request_module("cx88-blackbird");
}
@@ -96,7 +94,7 @@ static int cx8802_start_dma(struct cx8802_dev *dev,
dprintk( 1, "core->active_type_id = 0x%08x\n", core->active_type_id);
if ( (core->active_type_id == CX88_MPEG_DVB) &&
- (cx88_boards[core->board].mpeg & CX88_MPEG_DVB) ) {
+ (core->board.mpeg & CX88_MPEG_DVB) ) {
dprintk( 1, "cx8802_start_dma doing .dvb\n");
/* negedge driven & software reset */
@@ -104,7 +102,7 @@ static int cx8802_start_dma(struct cx8802_dev *dev,
udelay(100);
cx_write(MO_PINMUX_IO, 0x00);
cx_write(TS_HW_SOP_CNTRL,0x47<<16|188<<4|0x01);
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T:
case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
@@ -125,7 +123,7 @@ static int cx8802_start_dma(struct cx8802_dev *dev,
cx_write(TS_GEN_CNTRL, dev->ts_gen_cntrl);
udelay(100);
} else if ( (core->active_type_id == CX88_MPEG_BLACKBIRD) &&
- (cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD) ) {
+ (core->board.mpeg & CX88_MPEG_BLACKBIRD) ) {
dprintk( 1, "cx8802_start_dma doing .blackbird\n");
cx_write(MO_PINMUX_IO, 0x88); /* enable MPEG parallel IO */
@@ -139,7 +137,7 @@ static int cx8802_start_dma(struct cx8802_dev *dev,
udelay(100);
} else {
printk( "%s() Failed. Unsupported value in .mpeg (0x%08x)\n", __FUNCTION__,
- cx88_boards[core->board].mpeg );
+ core->board.mpeg );
return -EINVAL;
}
@@ -149,7 +147,7 @@ static int cx8802_start_dma(struct cx8802_dev *dev,
/* enable irqs */
dprintk( 1, "setting the interrupt mask\n" );
- cx_set(MO_PCI_INTMSK, core->pci_irqmask | 0x04);
+ cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_TSINT);
cx_set(MO_TS_INTMSK, 0x1f0011);
/* start dma */
@@ -167,7 +165,7 @@ static int cx8802_stop_dma(struct cx8802_dev *dev)
cx_clear(MO_TS_DMACNTRL, 0x11);
/* disable irqs */
- cx_clear(MO_PCI_INTMSK, 0x000004);
+ cx_clear(MO_PCI_INTMSK, PCI_INT_TSINT);
cx_clear(MO_TS_INTMSK, 0x1f0011);
/* Reset the controller */
@@ -181,43 +179,43 @@ static int cx8802_restart_queue(struct cx8802_dev *dev,
struct cx88_buffer *buf;
struct list_head *item;
- dprintk( 1, "cx8802_restart_queue\n" );
+ dprintk( 1, "cx8802_restart_queue\n" );
if (list_empty(&q->active))
{
- struct cx88_buffer *prev;
- prev = NULL;
-
- dprintk(1, "cx8802_restart_queue: queue is empty\n" );
-
- for (;;) {
- if (list_empty(&q->queued))
- return 0;
- buf = list_entry(q->queued.next, struct cx88_buffer, vb.queue);
- if (NULL == prev) {
- list_del(&buf->vb.queue);
- list_add_tail(&buf->vb.queue,&q->active);
- cx8802_start_dma(dev, q, buf);
- buf->vb.state = STATE_ACTIVE;
- buf->count = q->count++;
- mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
- dprintk(1,"[%p/%d] restart_queue - first active\n",
- buf,buf->vb.i);
-
- } else if (prev->vb.width == buf->vb.width &&
- prev->vb.height == buf->vb.height &&
- prev->fmt == buf->fmt) {
- list_del(&buf->vb.queue);
- list_add_tail(&buf->vb.queue,&q->active);
- buf->vb.state = STATE_ACTIVE;
- buf->count = q->count++;
- prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
- dprintk(1,"[%p/%d] restart_queue - move to active\n",
- buf,buf->vb.i);
- } else {
- return 0;
- }
- prev = buf;
- }
+ struct cx88_buffer *prev;
+ prev = NULL;
+
+ dprintk(1, "cx8802_restart_queue: queue is empty\n" );
+
+ for (;;) {
+ if (list_empty(&q->queued))
+ return 0;
+ buf = list_entry(q->queued.next, struct cx88_buffer, vb.queue);
+ if (NULL == prev) {
+ list_del(&buf->vb.queue);
+ list_add_tail(&buf->vb.queue,&q->active);
+ cx8802_start_dma(dev, q, buf);
+ buf->vb.state = STATE_ACTIVE;
+ buf->count = q->count++;
+ mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+ dprintk(1,"[%p/%d] restart_queue - first active\n",
+ buf,buf->vb.i);
+
+ } else if (prev->vb.width == buf->vb.width &&
+ prev->vb.height == buf->vb.height &&
+ prev->fmt == buf->fmt) {
+ list_del(&buf->vb.queue);
+ list_add_tail(&buf->vb.queue,&q->active);
+ buf->vb.state = STATE_ACTIVE;
+ buf->count = q->count++;
+ prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+ dprintk(1,"[%p/%d] restart_queue - move to active\n",
+ buf,buf->vb.i);
+ } else {
+ return 0;
+ }
+ prev = buf;
+ }
return 0;
}
@@ -239,6 +237,7 @@ int cx8802_buf_prepare(struct videobuf_queue *q, struct cx8802_dev *dev,
struct cx88_buffer *buf, enum v4l2_field field)
{
int size = dev->ts_packet_size * dev->ts_packet_count;
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
int rc;
dprintk(1, "%s: %p\n", __FUNCTION__, buf);
@@ -254,8 +253,8 @@ int cx8802_buf_prepare(struct videobuf_queue *q, struct cx8802_dev *dev,
if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL)))
goto fail;
cx88_risc_databuffer(dev->pci, &buf->risc,
- buf->vb.dma.sglist,
- buf->vb.width, buf->vb.height);
+ dma->sglist,
+ buf->vb.width, buf->vb.height, 0);
}
buf->vb.state = STATE_PREPARED;
return 0;
@@ -414,7 +413,8 @@ static irqreturn_t cx8802_irq(int irq, void *dev_id)
int loop, handled = 0;
for (loop = 0; loop < MAX_IRQ_LOOP; loop++) {
- status = cx_read(MO_PCI_INTSTAT) & (core->pci_irqmask | 0x04);
+ status = cx_read(MO_PCI_INTSTAT) &
+ (core->pci_irqmask | PCI_INT_TSINT);
if (0 == status)
goto out;
dprintk( 1, "cx8802_irq\n" );
@@ -425,7 +425,7 @@ static irqreturn_t cx8802_irq(int irq, void *dev_id)
if (status & core->pci_irqmask)
cx88_core_irq(core,status);
- if (status & 0x04)
+ if (status & PCI_INT_TSINT)
cx8802_mpeg_irq(dev);
};
if (MAX_IRQ_LOOP == loop) {
@@ -676,22 +676,24 @@ int cx8802_register_driver(struct cx8802_driver *drv)
struct list_head *list;
int err = 0, i = 0;
- printk(KERN_INFO "%s() ->registering driver type=%s access=%s\n", __FUNCTION__ ,
- drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird",
- drv->hw_access == CX8802_DRVCTL_SHARED ? "shared" : "exclusive");
+ printk(KERN_INFO
+ "cx88/2: registering cx8802 driver, type: %s access: %s\n",
+ drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird",
+ drv->hw_access == CX8802_DRVCTL_SHARED ? "shared" : "exclusive");
if ((err = cx8802_check_driver(drv)) != 0) {
- printk(KERN_INFO "%s() cx8802_driver is invalid\n", __FUNCTION__ );
+ printk(KERN_ERR "cx88/2: cx8802_driver is invalid\n");
return err;
}
list_for_each(list,&cx8802_devlist) {
h = list_entry(list, struct cx8802_dev, devlist);
- printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d]\n",
- h->core->name,h->pci->subsystem_vendor,
- h->pci->subsystem_device,cx88_boards[h->core->board].name,
- h->core->board);
+ printk(KERN_INFO
+ "%s/2: subsystem: %04x:%04x, board: %s [card=%d]\n",
+ h->core->name, h->pci->subsystem_vendor,
+ h->pci->subsystem_device, h->core->board.name,
+ h->core->boardnr);
/* Bring up a new struct for each driver instance */
driver = kzalloc(sizeof(*drv),GFP_KERNEL);
@@ -713,7 +715,9 @@ int cx8802_register_driver(struct cx8802_driver *drv)
list_add_tail(&driver->devlist,&h->drvlist.devlist);
mutex_unlock(&drv->core->lock);
} else {
- printk(KERN_ERR "%s() ->probe failed err = %d\n", __FUNCTION__, err);
+ printk(KERN_ERR
+ "%s/2: cx8802 probe failed, err = %d\n",
+ h->core->name, err);
}
}
@@ -733,17 +737,20 @@ int cx8802_unregister_driver(struct cx8802_driver *drv)
struct list_head *list2, *q;
int err = 0, i = 0;
- printk(KERN_INFO "%s() ->unregistering driver type=%s\n", __FUNCTION__ ,
- drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird");
+ printk(KERN_INFO
+ "cx88/2: unregistering cx8802 driver, type: %s access: %s\n",
+ drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird",
+ drv->hw_access == CX8802_DRVCTL_SHARED ? "shared" : "exclusive");
list_for_each(list,&cx8802_devlist) {
i++;
h = list_entry(list, struct cx8802_dev, devlist);
- printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d]\n",
- h->core->name,h->pci->subsystem_vendor,
- h->pci->subsystem_device,cx88_boards[h->core->board].name,
- h->core->board);
+ printk(KERN_INFO
+ "%s/2: subsystem: %04x:%04x, board: %s [card=%d]\n",
+ h->core->name, h->pci->subsystem_vendor,
+ h->pci->subsystem_device, h->core->board.name,
+ h->core->boardnr);
list_for_each_safe(list2, q, &h->drvlist.devlist) {
d = list_entry(list2, struct cx8802_driver, devlist);
@@ -758,7 +765,8 @@ int cx8802_unregister_driver(struct cx8802_driver *drv)
list_del(list2);
mutex_unlock(&drv->core->lock);
} else
- printk(KERN_ERR "%s() ->remove failed err = %d\n", __FUNCTION__, err);
+ printk(KERN_ERR "%s/2: cx8802 driver remove "
+ "failed (%d)\n", h->core->name, err);
}
@@ -783,7 +791,7 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev,
printk("%s/2: cx2388x 8802 Driver Manager\n", core->name);
err = -ENODEV;
- if (!cx88_boards[core->board].mpeg)
+ if (!core->board.mpeg)
goto fail_core;
err = -ENOMEM;
@@ -866,7 +874,7 @@ static struct pci_driver cx8802_pci_driver = {
static int cx8802_init(void)
{
- printk(KERN_INFO "cx2388x cx88-mpeg Driver Manager version %d.%d.%d loaded\n",
+ printk(KERN_INFO "cx88/2: cx2388x MPEG-TS Driver Manager version %d.%d.%d loaded\n",
(CX88_VERSION_CODE >> 16) & 0xff,
(CX88_VERSION_CODE >> 8) & 0xff,
CX88_VERSION_CODE & 0xff);
diff --git a/drivers/media/video/cx88/cx88-reg.h b/drivers/media/video/cx88/cx88-reg.h
index d3bf5b17b1d..2ec52d1cdea 100644
--- a/drivers/media/video/cx88/cx88-reg.h
+++ b/drivers/media/video/cx88/cx88-reg.h
@@ -582,6 +582,28 @@
/* ---------------------------------------------------------------------- */
/* various constants */
+// DMA
+/* Interrupt mask/status */
+#define PCI_INT_VIDINT (1 << 0)
+#define PCI_INT_AUDINT (1 << 1)
+#define PCI_INT_TSINT (1 << 2)
+#define PCI_INT_VIPINT (1 << 3)
+#define PCI_INT_HSTINT (1 << 4)
+#define PCI_INT_TM1INT (1 << 5)
+#define PCI_INT_SRCDMAINT (1 << 6)
+#define PCI_INT_DSTDMAINT (1 << 7)
+#define PCI_INT_RISC_RD_BERRINT (1 << 10)
+#define PCI_INT_RISC_WR_BERRINT (1 << 11)
+#define PCI_INT_BRDG_BERRINT (1 << 12)
+#define PCI_INT_SRC_DMA_BERRINT (1 << 13)
+#define PCI_INT_DST_DMA_BERRINT (1 << 14)
+#define PCI_INT_IPB_DMA_BERRINT (1 << 15)
+#define PCI_INT_I2CDONE (1 << 16)
+#define PCI_INT_I2CRACK (1 << 17)
+#define PCI_INT_IR_SMPINT (1 << 18)
+#define PCI_INT_GPIO_INT0 (1 << 19)
+#define PCI_INT_GPIO_INT1 (1 << 20)
+
#define SEL_BTSC 0x01
#define SEL_EIAJ 0x02
#define SEL_A2 0x04
@@ -590,6 +612,19 @@
#define SEL_FMRADIO 0x20
// AUD_CTL
+#define AUD_INT_DN_RISCI1 (1 << 0)
+#define AUD_INT_UP_RISCI1 (1 << 1)
+#define AUD_INT_RDS_DN_RISCI1 (1 << 2)
+#define AUD_INT_DN_RISCI2 (1 << 4) /* yes, 3 is skipped */
+#define AUD_INT_UP_RISCI2 (1 << 5)
+#define AUD_INT_RDS_DN_RISCI2 (1 << 6)
+#define AUD_INT_DN_SYNC (1 << 12)
+#define AUD_INT_UP_SYNC (1 << 13)
+#define AUD_INT_RDS_DN_SYNC (1 << 14)
+#define AUD_INT_OPC_ERR (1 << 16)
+#define AUD_INT_BER_IRQ (1 << 20)
+#define AUD_INT_MCHG_IRQ (1 << 21)
+
#define EN_BTSC_FORCE_MONO 0
#define EN_BTSC_FORCE_STEREO 1
#define EN_BTSC_FORCE_SAP 2
diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c
index 1cc2d286a1c..76e5c78d8ae 100644
--- a/drivers/media/video/cx88/cx88-tvaudio.c
+++ b/drivers/media/video/cx88/cx88-tvaudio.c
@@ -36,7 +36,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/freezer.h>
#include <linux/kernel.h>
@@ -62,6 +61,10 @@ static unsigned int always_analog = 0;
module_param(always_analog,int,0644);
MODULE_PARM_DESC(always_analog,"force analog audio out");
+static unsigned int radio_deemphasis = 0;
+module_param(radio_deemphasis,int,0644);
+MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, "
+ "0=None, 1=50us (elsewhere), 2=75us (USA)");
#define dprintk(fmt, arg...) if (audio_debug) \
printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
@@ -140,7 +143,7 @@ static void set_audio_finish(struct cx88_core *core, u32 ctl)
cx_write(AUD_RATE_THRES_DMD, 0x000000C0);
cx88_start_audio_dma(core);
- if (cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD) {
+ if (core->board.mpeg & CX88_MPEG_BLACKBIRD) {
cx_write(AUD_I2SINPUTCNTL, 4);
cx_write(AUD_BAUDRATE, 1);
/* 'pass-thru mode': this enables the i2s output to the mpeg encoder */
@@ -149,7 +152,7 @@ static void set_audio_finish(struct cx88_core *core, u32 ctl)
cx_write(AUD_I2SCNTL, 0);
/* cx_write(AUD_APB_IN_RATE_ADJ, 0); */
}
- if ((always_analog) || (!(cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD))) {
+ if ((always_analog) || (!(core->board.mpeg & CX88_MPEG_BLACKBIRD))) {
ctl |= EN_DAC_ENABLE;
cx_write(AUD_CTL, ctl);
}
@@ -678,6 +681,10 @@ static void set_audio_standard_FM(struct cx88_core *core,
};
/* It is enough to leave default values? */
+ /* No, it's not! The deemphasis registers are reset to the 75us
+ * values by default. Analyzing the spectrum of the decoded audio
+ * reveals that "no deemphasis" is the same as 75 us, while the 50 us
+ * setting results in less deemphasis. */
static const struct rlist fm_no_deemph[] = {
{AUD_POLYPH80SCALEFAC, 0x0003},
@@ -688,6 +695,7 @@ static void set_audio_standard_FM(struct cx88_core *core,
set_audio_start(core, SEL_FMRADIO);
switch (deemph) {
+ default:
case FM_NO_DEEMPH:
set_audio_registers(core, fm_no_deemph);
break;
@@ -757,7 +765,7 @@ void cx88_set_tvaudio(struct cx88_core *core)
set_audio_standard_EIAJ(core);
break;
case WW_FM:
- set_audio_standard_FM(core, FM_NO_DEEMPH);
+ set_audio_standard_FM(core, radio_deemphasis);
break;
case WW_NONE:
default:
@@ -790,9 +798,9 @@ void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t)
core->astat = reg;
/* TODO
- Reading from AUD_STATUS is not enough
- for auto-detecting sap/dual-fm/nicam.
- Add some code here later.
+ Reading from AUD_STATUS is not enough
+ for auto-detecting sap/dual-fm/nicam.
+ Add some code here later.
*/
return;
diff --git a/drivers/media/video/cx88/cx88-vbi.c b/drivers/media/video/cx88/cx88-vbi.c
index 86c1cf8334b..babb0855640 100644
--- a/drivers/media/video/cx88/cx88-vbi.c
+++ b/drivers/media/video/cx88/cx88-vbi.c
@@ -2,7 +2,6 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -67,7 +66,7 @@ static int cx8800_start_vbi_dma(struct cx8800_dev *dev,
q->count = 1;
/* enable irqs */
- cx_set(MO_PCI_INTMSK, core->pci_irqmask | 0x01);
+ cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT);
cx_set(MO_VID_INTMSK, 0x0f0088);
/* enable capture */
@@ -91,7 +90,7 @@ int cx8800_stop_vbi_dma(struct cx8800_dev *dev)
cx_clear(VID_CAPTURE_CONTROL,0x18);
/* disable irqs */
- cx_clear(MO_PCI_INTMSK, 0x000001);
+ cx_clear(MO_PCI_INTMSK, PCI_INT_VIDINT);
cx_clear(MO_VID_INTMSK, 0x0f0088);
return 0;
}
@@ -100,7 +99,6 @@ int cx8800_restart_vbi_queue(struct cx8800_dev *dev,
struct cx88_dmaqueue *q)
{
struct cx88_buffer *buf;
- struct list_head *item;
if (list_empty(&q->active))
return 0;
@@ -109,10 +107,8 @@ int cx8800_restart_vbi_queue(struct cx8800_dev *dev,
dprintk(2,"restart_queue [%p/%d]: restart dma\n",
buf, buf->vb.i);
cx8800_start_vbi_dma(dev, q, buf);
- list_for_each(item,&q->active) {
- buf = list_entry(item, struct cx88_buffer, vb.queue);
+ list_for_each_entry(buf, &q->active, vb.queue)
buf->count = q->count++;
- }
mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
return 0;
}
@@ -173,6 +169,7 @@ vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
return -EINVAL;
if (STATE_NEEDS_INIT == buf->vb.state) {
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
buf->vb.width = VBI_LINE_LENGTH;
buf->vb.height = VBI_LINE_COUNT;
buf->vb.size = size;
@@ -181,7 +178,7 @@ vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL)))
goto fail;
cx88_risc_buffer(dev->pci, &buf->risc,
- buf->vb.dma.sglist,
+ dma->sglist,
0, buf->vb.width * buf->vb.height,
buf->vb.width, 0,
buf->vb.height);
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 06b233a7b20..231ae6c4dd2 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -28,7 +28,6 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kmod.h>
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -36,7 +35,6 @@
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/kthread.h>
-#include <linux/dma-mapping.h>
#include <asm/div64.h>
#include "cx88.h"
@@ -369,17 +367,17 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input)
/* struct cx88_core *core = dev->core; */
dprintk(1,"video_mux: %d [vmux=%d,gpio=0x%x,0x%x,0x%x,0x%x]\n",
- input, INPUT(input)->vmux,
- INPUT(input)->gpio0,INPUT(input)->gpio1,
- INPUT(input)->gpio2,INPUT(input)->gpio3);
+ input, INPUT(input).vmux,
+ INPUT(input).gpio0,INPUT(input).gpio1,
+ INPUT(input).gpio2,INPUT(input).gpio3);
core->input = input;
- cx_andor(MO_INPUT_FORMAT, 0x03 << 14, INPUT(input)->vmux << 14);
- cx_write(MO_GP3_IO, INPUT(input)->gpio3);
- cx_write(MO_GP0_IO, INPUT(input)->gpio0);
- cx_write(MO_GP1_IO, INPUT(input)->gpio1);
- cx_write(MO_GP2_IO, INPUT(input)->gpio2);
+ cx_andor(MO_INPUT_FORMAT, 0x03 << 14, INPUT(input).vmux << 14);
+ cx_write(MO_GP3_IO, INPUT(input).gpio3);
+ cx_write(MO_GP0_IO, INPUT(input).gpio0);
+ cx_write(MO_GP1_IO, INPUT(input).gpio1);
+ cx_write(MO_GP2_IO, INPUT(input).gpio2);
- switch (INPUT(input)->type) {
+ switch (INPUT(input).type) {
case CX88_VMUX_SVIDEO:
cx_set(MO_AFECFG_IO, 0x00000001);
cx_set(MO_INPUT_FORMAT, 0x00010010);
@@ -394,9 +392,9 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input)
break;
}
- if (cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD) {
+ if (core->board.mpeg & CX88_MPEG_BLACKBIRD) {
/* sets sound input from external adc */
- if (INPUT(input)->extadc)
+ if (INPUT(input).extadc)
cx_set(AUD_CTL, EN_I2SIN_ENABLE);
else
cx_clear(AUD_CTL, EN_I2SIN_ENABLE);
@@ -424,7 +422,7 @@ static int start_video_dma(struct cx8800_dev *dev,
q->count = 1;
/* enable irqs */
- cx_set(MO_PCI_INTMSK, core->pci_irqmask | 0x01);
+ cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT);
/* Enables corresponding bits at PCI_INT_STAT:
bits 0 to 4: video, audio, transport stream, VIP, Host
@@ -457,7 +455,7 @@ static int stop_video_dma(struct cx8800_dev *dev)
cx_clear(VID_CAPTURE_CONTROL,0x06);
/* disable irqs */
- cx_clear(MO_PCI_INTMSK, 0x000001);
+ cx_clear(MO_PCI_INTMSK, PCI_INT_VIDINT);
cx_clear(MO_VID_INTMSK, 0x0f0011);
return 0;
}
@@ -468,17 +466,14 @@ static int restart_video_queue(struct cx8800_dev *dev,
{
struct cx88_core *core = dev->core;
struct cx88_buffer *buf, *prev;
- struct list_head *item;
if (!list_empty(&q->active)) {
buf = list_entry(q->active.next, struct cx88_buffer, vb.queue);
dprintk(2,"restart_queue [%p/%d]: restart dma\n",
buf, buf->vb.i);
start_video_dma(dev, q, buf);
- list_for_each(item,&q->active) {
- buf = list_entry(item, struct cx88_buffer, vb.queue);
- buf->count = q->count++;
- }
+ list_for_each_entry(buf, &q->active, vb.queue)
+ buf->count = q->count++;
mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
return 0;
}
@@ -536,6 +531,7 @@ buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
struct cx8800_dev *dev = fh->dev;
struct cx88_core *core = dev->core;
struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb);
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
int rc, init_buffer = 0;
BUG_ON(NULL == fh->fmt);
@@ -568,30 +564,30 @@ buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
switch (buf->vb.field) {
case V4L2_FIELD_TOP:
cx88_risc_buffer(dev->pci, &buf->risc,
- buf->vb.dma.sglist, 0, UNSET,
+ dma->sglist, 0, UNSET,
buf->bpl, 0, buf->vb.height);
break;
case V4L2_FIELD_BOTTOM:
cx88_risc_buffer(dev->pci, &buf->risc,
- buf->vb.dma.sglist, UNSET, 0,
+ dma->sglist, UNSET, 0,
buf->bpl, 0, buf->vb.height);
break;
case V4L2_FIELD_INTERLACED:
cx88_risc_buffer(dev->pci, &buf->risc,
- buf->vb.dma.sglist, 0, buf->bpl,
+ dma->sglist, 0, buf->bpl,
buf->bpl, buf->bpl,
buf->vb.height >> 1);
break;
case V4L2_FIELD_SEQ_TB:
cx88_risc_buffer(dev->pci, &buf->risc,
- buf->vb.dma.sglist,
+ dma->sglist,
0, buf->bpl * (buf->vb.height >> 1),
buf->bpl, 0,
buf->vb.height >> 1);
break;
case V4L2_FIELD_SEQ_BT:
cx88_risc_buffer(dev->pci, &buf->risc,
- buf->vb.dma.sglist,
+ dma->sglist,
buf->bpl * (buf->vb.height >> 1), 0,
buf->bpl, 0,
buf->vb.height >> 1);
@@ -714,12 +710,10 @@ static int video_open(struct inode *inode, struct file *file)
struct cx8800_dev *h,*dev = NULL;
struct cx88_core *core;
struct cx8800_fh *fh;
- struct list_head *list;
enum v4l2_buf_type type = 0;
int radio = 0;
- list_for_each(list,&cx8800_devlist) {
- h = list_entry(list, struct cx8800_dev, devlist);
+ list_for_each_entry(h, &cx8800_devlist, devlist) {
if (h->video_dev->minor == minor) {
dev = h;
type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
@@ -754,13 +748,13 @@ static int video_open(struct inode *inode, struct file *file)
fh->height = 240;
fh->fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24);
- videobuf_queue_init(&fh->vidq, &cx8800_video_qops,
+ videobuf_queue_pci_init(&fh->vidq, &cx8800_video_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
sizeof(struct cx88_buffer),
fh);
- videobuf_queue_init(&fh->vbiq, &cx8800_vbi_qops,
+ videobuf_queue_pci_init(&fh->vbiq, &cx8800_vbi_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VBI_CAPTURE,
V4L2_FIELD_SEQ_TB,
@@ -768,12 +762,11 @@ static int video_open(struct inode *inode, struct file *file)
fh);
if (fh->radio) {
- int board = core->board;
dprintk(1,"video_open: setting radio device\n");
- cx_write(MO_GP3_IO, cx88_boards[board].radio.gpio3);
- cx_write(MO_GP0_IO, cx88_boards[board].radio.gpio0);
- cx_write(MO_GP1_IO, cx88_boards[board].radio.gpio1);
- cx_write(MO_GP2_IO, cx88_boards[board].radio.gpio2);
+ cx_write(MO_GP3_IO, core->board.radio.gpio3);
+ cx_write(MO_GP0_IO, core->board.radio.gpio0);
+ cx_write(MO_GP1_IO, core->board.radio.gpio1);
+ cx_write(MO_GP2_IO, core->board.radio.gpio2);
core->tvaudio = WW_FM;
cx88_set_tvaudio(core);
cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1);
@@ -1079,8 +1072,7 @@ static int vidioc_querycap (struct file *file, void *priv,
struct cx88_core *core = dev->core;
strcpy(cap->driver, "cx8800");
- strlcpy(cap->card, cx88_boards[core->board].name,
- sizeof(cap->card));
+ strlcpy(cap->card, core->board.name, sizeof(cap->card));
sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci));
cap->version = CX88_VERSION_CODE;
cap->capabilities =
@@ -1088,7 +1080,7 @@ static int vidioc_querycap (struct file *file, void *priv,
V4L2_CAP_READWRITE |
V4L2_CAP_STREAMING |
V4L2_CAP_VBI_CAPTURE;
- if (UNSET != core->tuner_type)
+ if (UNSET != core->board.tuner_type)
cap->capabilities |= V4L2_CAP_TUNER;
return 0;
}
@@ -1108,28 +1100,9 @@ static int vidioc_enum_fmt_cap (struct file *file, void *priv,
#ifdef CONFIG_VIDEO_V4L1_COMPAT
static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf)
{
- struct cx8800_fh *fh = priv;
- struct videobuf_queue *q;
- struct v4l2_requestbuffers req;
- unsigned int i;
- int err;
+ struct cx8800_fh *fh = priv;
- q = get_queue(fh);
- memset(&req,0,sizeof(req));
- req.type = q->type;
- req.count = 8;
- req.memory = V4L2_MEMORY_MMAP;
- err = videobuf_reqbufs(q,&req);
- if (err < 0)
- return err;
-
- mbuf->frames = req.count;
- mbuf->size = 0;
- for (i = 0; i < mbuf->frames; i++) {
- mbuf->offsets[i] = q->bufs[i]->boff;
- mbuf->size += q->bufs[i]->bsize;
- }
- return 0;
+ return videobuf_cgmbuf (get_queue(fh), mbuf, 8);
}
#endif
@@ -1222,14 +1195,14 @@ int cx88_enum_input (struct cx88_core *core,struct v4l2_input *i)
n = i->index;
if (n >= 4)
return -EINVAL;
- if (0 == INPUT(n)->type)
+ if (0 == INPUT(n).type)
return -EINVAL;
memset(i,0,sizeof(*i));
i->index = n;
i->type = V4L2_INPUT_TYPE_CAMERA;
- strcpy(i->name,iname[INPUT(n)->type]);
- if ((CX88_VMUX_TELEVISION == INPUT(n)->type) ||
- (CX88_VMUX_CABLE == INPUT(n)->type))
+ strcpy(i->name,iname[INPUT(n).type]);
+ if ((CX88_VMUX_TELEVISION == INPUT(n).type) ||
+ (CX88_VMUX_CABLE == INPUT(n).type))
i->type = V4L2_INPUT_TYPE_TUNER;
i->std = CX88_NORMS;
return 0;
@@ -1298,7 +1271,7 @@ static int vidioc_g_tuner (struct file *file, void *priv,
struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core;
u32 reg;
- if (unlikely(UNSET == core->tuner_type))
+ if (unlikely(UNSET == core->board.tuner_type))
return -EINVAL;
if (0 != t->index)
return -EINVAL;
@@ -1319,7 +1292,7 @@ static int vidioc_s_tuner (struct file *file, void *priv,
{
struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core;
- if (UNSET == core->tuner_type)
+ if (UNSET == core->board.tuner_type)
return -EINVAL;
if (0 != t->index)
return -EINVAL;
@@ -1334,7 +1307,7 @@ static int vidioc_g_frequency (struct file *file, void *priv,
struct cx8800_fh *fh = priv;
struct cx88_core *core = fh->dev->core;
- if (unlikely(UNSET == core->tuner_type))
+ if (unlikely(UNSET == core->board.tuner_type))
return -EINVAL;
/* f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; */
@@ -1349,7 +1322,7 @@ static int vidioc_g_frequency (struct file *file, void *priv,
int cx88_set_freq (struct cx88_core *core,
struct v4l2_frequency *f)
{
- if (unlikely(UNSET == core->tuner_type))
+ if (unlikely(UNSET == core->board.tuner_type))
return -EINVAL;
if (unlikely(f->tuner != 0))
return -EINVAL;
@@ -1420,8 +1393,7 @@ static int radio_querycap (struct file *file, void *priv,
struct cx88_core *core = dev->core;
strcpy(cap->driver, "cx8800");
- strlcpy(cap->card, cx88_boards[core->board].name,
- sizeof(cap->card));
+ strlcpy(cap->card, core->board.name, sizeof(cap->card));
sprintf(cap->bus_info,"PCI:%s", pci_name(dev->pci));
cap->version = CX88_VERSION_CODE;
cap->capabilities = V4L2_CAP_TUNER;
@@ -1608,7 +1580,8 @@ static irqreturn_t cx8800_irq(int irq, void *dev_id)
int loop, handled = 0;
for (loop = 0; loop < 10; loop++) {
- status = cx_read(MO_PCI_INTSTAT) & (core->pci_irqmask | 0x01);
+ status = cx_read(MO_PCI_INTSTAT) &
+ (core->pci_irqmask | PCI_INT_VIDINT);
if (0 == status)
goto out;
cx_write(MO_PCI_INTSTAT, status);
@@ -1616,7 +1589,7 @@ static irqreturn_t cx8800_irq(int irq, void *dev_id)
if (status & core->pci_irqmask)
cx88_core_irq(core,status);
- if (status & 0x01)
+ if (status & PCI_INT_VIDINT)
cx8800_vid_irq(dev);
};
if (10 == loop) {
@@ -1717,6 +1690,10 @@ static struct video_device cx8800_radio_template =
.vidioc_s_ctrl = vidioc_s_ctrl,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .vidioc_g_register = vidioc_g_register,
+ .vidioc_s_register = vidioc_s_register,
+#endif
};
/* ----------------------------------------------------------- */
@@ -1818,26 +1795,32 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
err = request_irq(pci_dev->irq, cx8800_irq,
IRQF_SHARED | IRQF_DISABLED, core->name, dev);
if (err < 0) {
- printk(KERN_ERR "%s: can't get IRQ %d\n",
+ printk(KERN_ERR "%s/0: can't get IRQ %d\n",
core->name,pci_dev->irq);
goto fail_core;
}
cx_set(MO_PCI_INTMSK, core->pci_irqmask);
/* load and configure helper modules */
- if (TUNER_ABSENT != core->tuner_type)
+ if (TUNER_ABSENT != core->board.tuner_type)
request_module("tuner");
- if (cx88_boards[ core->board ].audio_chip == AUDIO_CHIP_WM8775)
+ if (core->board.audio_chip == AUDIO_CHIP_WM8775)
request_module("wm8775");
+ switch (core->boardnr) {
+ case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
+ request_module("ir-kbd-i2c");
+ request_module("rtc-isl1208");
+ }
+
/* register v4l devices */
dev->video_dev = cx88_vdev_init(core,dev->pci,
&cx8800_video_template,"video");
err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,
video_nr[core->nr]);
if (err < 0) {
- printk(KERN_INFO "%s: can't register video device\n",
+ printk(KERN_ERR "%s/0: can't register video device\n",
core->name);
goto fail_unreg;
}
@@ -1848,20 +1831,20 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI,
vbi_nr[core->nr]);
if (err < 0) {
- printk(KERN_INFO "%s/0: can't register vbi device\n",
+ printk(KERN_ERR "%s/0: can't register vbi device\n",
core->name);
goto fail_unreg;
}
printk(KERN_INFO "%s/0: registered device vbi%d\n",
core->name,dev->vbi_dev->minor & 0x1f);
- if (core->has_radio) {
+ if (core->board.radio.type == CX88_RADIO) {
dev->radio_dev = cx88_vdev_init(core,dev->pci,
&cx8800_radio_template,"radio");
err = video_register_device(dev->radio_dev,VFL_TYPE_RADIO,
radio_nr[core->nr]);
if (err < 0) {
- printk(KERN_INFO "%s/0: can't register radio device\n",
+ printk(KERN_ERR "%s/0: can't register radio device\n",
core->name);
goto fail_unreg;
}
@@ -1881,12 +1864,12 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
mutex_unlock(&core->lock);
/* start tvaudio thread */
- if (core->tuner_type != TUNER_ABSENT) {
+ if (core->board.tuner_type != TUNER_ABSENT) {
core->kthread = kthread_run(cx88_audio_thread, core, "cx88 tvaudio");
if (IS_ERR(core->kthread)) {
err = PTR_ERR(core->kthread);
- printk(KERN_ERR "Failed to create cx88 audio thread, err=%d\n",
- err);
+ printk(KERN_ERR "%s/0: failed to create cx88 audio thread, err=%d\n",
+ core->name, err);
}
}
return 0;
@@ -1937,17 +1920,19 @@ static int cx8800_suspend(struct pci_dev *pci_dev, pm_message_t state)
/* stop video+vbi capture */
spin_lock(&dev->slock);
if (!list_empty(&dev->vidq.active)) {
- printk("%s: suspend video\n", core->name);
+ printk("%s/0: suspend video\n", core->name);
stop_video_dma(dev);
del_timer(&dev->vidq.timeout);
}
if (!list_empty(&dev->vbiq.active)) {
- printk("%s: suspend vbi\n", core->name);
+ printk("%s/0: suspend vbi\n", core->name);
cx8800_stop_vbi_dma(dev);
del_timer(&dev->vbiq.timeout);
}
spin_unlock(&dev->slock);
+ if (core->ir)
+ cx88_ir_stop(core, core->ir);
/* FIXME -- shutdown device */
cx88_shutdown(core);
@@ -1968,8 +1953,8 @@ static int cx8800_resume(struct pci_dev *pci_dev)
if (dev->state.disabled) {
err=pci_enable_device(pci_dev);
if (err) {
- printk(KERN_ERR "%s: can't enable device\n",
- core->name);
+ printk(KERN_ERR "%s/0: can't enable device\n",
+ core->name);
return err;
}
@@ -1977,9 +1962,7 @@ static int cx8800_resume(struct pci_dev *pci_dev)
}
err= pci_set_power_state(pci_dev, PCI_D0);
if (err) {
- printk(KERN_ERR "%s: can't enable device\n",
- core->name);
-
+ printk(KERN_ERR "%s/0: can't set power state\n", core->name);
pci_disable_device(pci_dev);
dev->state.disabled = 1;
@@ -1989,15 +1972,19 @@ static int cx8800_resume(struct pci_dev *pci_dev)
/* FIXME: re-initialize hardware */
cx88_reset(core);
+ if (core->ir)
+ cx88_ir_start(core, core->ir);
+
+ cx_set(MO_PCI_INTMSK, core->pci_irqmask);
/* restart video+vbi capture */
spin_lock(&dev->slock);
if (!list_empty(&dev->vidq.active)) {
- printk("%s: resume video\n", core->name);
+ printk("%s/0: resume video\n", core->name);
restart_video_queue(dev,&dev->vidq);
}
if (!list_empty(&dev->vbiq.active)) {
- printk("%s: resume vbi\n", core->name);
+ printk("%s/0: resume vbi\n", core->name);
cx8800_restart_vbi_queue(dev,&dev->vbiq);
}
spin_unlock(&dev->slock);
@@ -2033,7 +2020,7 @@ static struct pci_driver cx8800_pci_driver = {
static int cx8800_init(void)
{
- printk(KERN_INFO "cx2388x v4l2 driver version %d.%d.%d loaded\n",
+ printk(KERN_INFO "cx88/0: cx2388x v4l2 driver version %d.%d.%d loaded\n",
(CX88_VERSION_CODE >> 16) & 0xff,
(CX88_VERSION_CODE >> 8) & 0xff,
CX88_VERSION_CODE & 0xff);
diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.c b/drivers/media/video/cx88/cx88-vp3054-i2c.c
index cd0877636a3..77c37889232 100644
--- a/drivers/media/video/cx88/cx88-vp3054-i2c.c
+++ b/drivers/media/video/cx88/cx88-vp3054-i2c.c
@@ -23,7 +23,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <asm/io.h>
@@ -111,7 +110,7 @@ int vp3054_i2c_probe(struct cx8802_dev *dev)
struct vp3054_i2c_state *vp3054_i2c;
int rc;
- if (core->board != CX88_BOARD_DNTV_LIVE_DVB_T_PRO)
+ if (core->boardnr != CX88_BOARD_DNTV_LIVE_DVB_T_PRO)
return 0;
dev->card_priv = kzalloc(sizeof(*vp3054_i2c), GFP_KERNEL);
@@ -152,7 +151,7 @@ void vp3054_i2c_remove(struct cx8802_dev *dev)
struct vp3054_i2c_state *vp3054_i2c = dev->card_priv;
if (vp3054_i2c == NULL ||
- dev->core->board != CX88_BOARD_DNTV_LIVE_DVB_T_PRO)
+ dev->core->boardnr != CX88_BOARD_DNTV_LIVE_DVB_T_PRO)
return;
i2c_del_adapter(&vp3054_i2c->adap);
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index 809126866a3..42e0a9b8c55 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -28,11 +28,11 @@
#include <media/v4l2-common.h>
#include <media/tuner.h>
#include <media/tveeprom.h>
-#include <media/video-buf.h>
+#include <media/videobuf-dma-sg.h>
#include <media/cx2341x.h>
#include <media/audiochip.h>
-#if defined(CONFIG_VIDEO_BUF_DVB) || defined(CONFIG_VIDEO_BUF_DVB_MODULE)
-#include <media/video-buf-dvb.h>
+#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
+#include <media/videobuf-dvb.h>
#endif
#include "btcx-risc.h"
@@ -226,8 +226,8 @@ enum cx88_itype {
struct cx88_input {
enum cx88_itype type;
- unsigned int vmux;
u32 gpio0, gpio1, gpio2, gpio3;
+ unsigned int vmux:2;
unsigned int extadc:1;
};
@@ -250,7 +250,7 @@ struct cx88_subid {
u32 card;
};
-#define INPUT(nr) (&cx88_boards[core->board].input[nr])
+#define INPUT(nr) (core->board.input[nr])
/* ----------------------------------------------------------- */
/* device / file handle status */
@@ -304,19 +304,14 @@ struct cx88_core {
u32 i2c_state, i2c_rc;
/* config info -- analog */
- unsigned int board;
- unsigned int tuner_type;
- unsigned int radio_type;
- unsigned char tuner_addr;
- unsigned char radio_addr;
- unsigned int tda9887_conf;
- unsigned int has_radio;
+ unsigned int boardnr;
+ struct cx88_board board;
/* Supported V4L _STD_ tuner formats */
unsigned int tuner_formats;
/* config info -- dvb */
-#if defined(CONFIG_VIDEO_BUF_DVB) || defined(CONFIG_VIDEO_BUF_DVB_MODULE)
+#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
int (*prev_set_voltage)(struct dvb_frontend* fe, fe_sec_voltage_t voltage);
#endif
@@ -463,7 +458,7 @@ struct cx8802_dev {
int width;
int height;
-#if defined(CONFIG_VIDEO_BUF_DVB) || defined(CONFIG_VIDEO_BUF_DVB_MODULE)
+#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
/* for dvb only */
struct videobuf_dvb dvb;
@@ -524,7 +519,7 @@ cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc,
extern int
cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc,
struct scatterlist *sglist, unsigned int bpl,
- unsigned int lines);
+ unsigned int lines, unsigned int lpi);
extern int
cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
u32 reg, u32 mask, u32 value);
@@ -585,15 +580,9 @@ extern void cx88_call_i2c_clients(struct cx88_core *core,
/* ----------------------------------------------------------- */
/* cx88-cards.c */
-extern struct cx88_board cx88_boards[];
-extern const unsigned int cx88_bcount;
-
-extern struct cx88_subid cx88_subids[];
-extern const unsigned int cx88_idcount;
-
-extern void cx88_card_list(struct cx88_core *core, struct pci_dev *pci);
-extern void cx88_card_setup(struct cx88_core *core);
-extern void cx88_card_setup_pre_i2c(struct cx88_core *core);
+extern int cx88_get_resources(const struct cx88_core *core,
+ struct pci_dev *pci);
+extern struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr);
/* ----------------------------------------------------------- */
/* cx88-tvaudio.c */
@@ -625,6 +614,8 @@ struct cx8802_driver * cx8802_get_driver(struct cx8802_dev *dev, enum cx88_board
int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci);
int cx88_ir_fini(struct cx88_core *core);
void cx88_ir_irq(struct cx88_core *core);
+void cx88_ir_start(struct cx88_core *core, struct cx88_IR *ir);
+void cx88_ir_stop(struct cx88_core *core, struct cx88_IR *ir);
/* ----------------------------------------------------------- */
/* cx88-mpeg.c */
diff --git a/drivers/media/video/dpc7146.c b/drivers/media/video/dpc7146.c
index 0fcc935828f..255dae30370 100644
--- a/drivers/media/video/dpc7146.c
+++ b/drivers/media/video/dpc7146.c
@@ -92,7 +92,6 @@ static int dpc_probe(struct saa7146_dev* dev)
{
struct dpc* dpc = NULL;
struct i2c_client *client;
- struct list_head *item;
dpc = kzalloc(sizeof(struct dpc), GFP_KERNEL);
if( NULL == dpc ) {
@@ -116,11 +115,9 @@ static int dpc_probe(struct saa7146_dev* dev)
}
/* loop through all i2c-devices on the bus and look who is there */
- list_for_each(item,&dpc->i2c_adapter.clients) {
- client = list_entry(item, struct i2c_client, list);
+ list_for_each_entry(client, &dpc->i2c_adapter.clients, list)
if( I2C_SAA7111A == client->addr )
dpc->saa7111a = client;
- }
/* check if all devices are present */
if( 0 == dpc->saa7111a ) {
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 255a47dfb84..d3282ec62c5 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -24,7 +24,6 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/usb.h>
#include <linux/vmalloc.h>
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index 55d45b0032c..e3894b68c4e 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -22,7 +22,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 40307f3f6fe..b8d5327c438 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -252,10 +252,8 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
int minor = iminor(inode);
int errCode = 0;
struct em28xx *h,*dev = NULL;
- struct list_head *list;
- list_for_each(list,&em28xx_devlist) {
- h = list_entry(list, struct em28xx, devlist);
+ list_for_each_entry(h, &em28xx_devlist, devlist) {
if (h->vdev->minor == minor) {
dev = h;
dev->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
@@ -268,8 +266,6 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
if (NULL == dev)
return -ENODEV;
- filp->private_data=dev;
-
em28xx_videodbg("open minor=%d type=%s users=%d\n",
minor,v4l2_type_names[dev->type],dev->users);
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 585bd1fe076..d5fef4c01c8 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -22,7 +22,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/param.h>
-#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/device.h>
@@ -707,7 +706,8 @@ static u8 et61x251_strtou8(const char* buff, size_t len, ssize_t* count)
NOTE 2: buffers are PAGE_SIZE long
*/
-static ssize_t et61x251_show_reg(struct class_device* cd, char* buf)
+static ssize_t et61x251_show_reg(struct device* cd,
+ struct device_attribute *attr, char* buf)
{
struct et61x251_device* cam;
ssize_t count;
@@ -730,7 +730,8 @@ static ssize_t et61x251_show_reg(struct class_device* cd, char* buf)
static ssize_t
-et61x251_store_reg(struct class_device* cd, const char* buf, size_t len)
+et61x251_store_reg(struct device* cd,
+ struct device_attribute *attr, const char* buf, size_t len)
{
struct et61x251_device* cam;
u8 index;
@@ -762,7 +763,8 @@ et61x251_store_reg(struct class_device* cd, const char* buf, size_t len)
}
-static ssize_t et61x251_show_val(struct class_device* cd, char* buf)
+static ssize_t et61x251_show_val(struct device* cd,
+ struct device_attribute *attr, char* buf)
{
struct et61x251_device* cam;
ssize_t count;
@@ -793,7 +795,8 @@ static ssize_t et61x251_show_val(struct class_device* cd, char* buf)
static ssize_t
-et61x251_store_val(struct class_device* cd, const char* buf, size_t len)
+et61x251_store_val(struct device* cd, struct device_attribute *attr,
+ const char* buf, size_t len)
{
struct et61x251_device* cam;
u8 value;
@@ -831,7 +834,8 @@ et61x251_store_val(struct class_device* cd, const char* buf, size_t len)
}
-static ssize_t et61x251_show_i2c_reg(struct class_device* cd, char* buf)
+static ssize_t et61x251_show_i2c_reg(struct device* cd,
+ struct device_attribute *attr, char* buf)
{
struct et61x251_device* cam;
ssize_t count;
@@ -856,7 +860,8 @@ static ssize_t et61x251_show_i2c_reg(struct class_device* cd, char* buf)
static ssize_t
-et61x251_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
+et61x251_store_i2c_reg(struct device* cd, struct device_attribute *attr,
+ const char* buf, size_t len)
{
struct et61x251_device* cam;
u8 index;
@@ -888,7 +893,8 @@ et61x251_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
}
-static ssize_t et61x251_show_i2c_val(struct class_device* cd, char* buf)
+static ssize_t et61x251_show_i2c_val(struct device* cd,
+ struct device_attribute *attr, char* buf)
{
struct et61x251_device* cam;
ssize_t count;
@@ -924,7 +930,8 @@ static ssize_t et61x251_show_i2c_val(struct class_device* cd, char* buf)
static ssize_t
-et61x251_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
+et61x251_store_i2c_val(struct device* cd, struct device_attribute *attr,
+ const char* buf, size_t len)
{
struct et61x251_device* cam;
u8 value;
@@ -967,42 +974,40 @@ et61x251_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
}
-static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR,
- et61x251_show_reg, et61x251_store_reg);
-static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR,
- et61x251_show_val, et61x251_store_val);
-static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR,
- et61x251_show_i2c_reg, et61x251_store_i2c_reg);
-static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
- et61x251_show_i2c_val, et61x251_store_i2c_val);
+static DEVICE_ATTR(reg, S_IRUGO | S_IWUSR,
+ et61x251_show_reg, et61x251_store_reg);
+static DEVICE_ATTR(val, S_IRUGO | S_IWUSR,
+ et61x251_show_val, et61x251_store_val);
+static DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR,
+ et61x251_show_i2c_reg, et61x251_store_i2c_reg);
+static DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
+ et61x251_show_i2c_val, et61x251_store_i2c_val);
static int et61x251_create_sysfs(struct et61x251_device* cam)
{
- struct class_device *classdev = &(cam->v4ldev->class_dev);
+ struct device *classdev = &(cam->v4ldev->class_dev);
int err = 0;
- if ((err = class_device_create_file(classdev, &class_device_attr_reg)))
+ if ((err = device_create_file(classdev, &dev_attr_reg)))
goto err_out;
- if ((err = class_device_create_file(classdev, &class_device_attr_val)))
+ if ((err = device_create_file(classdev, &dev_attr_val)))
goto err_reg;
if (cam->sensor.sysfs_ops) {
- if ((err = class_device_create_file(classdev,
- &class_device_attr_i2c_reg)))
+ if ((err = device_create_file(classdev, &dev_attr_i2c_reg)))
goto err_val;
- if ((err = class_device_create_file(classdev,
- &class_device_attr_i2c_val)))
+ if ((err = device_create_file(classdev, &dev_attr_i2c_val)))
goto err_i2c_reg;
}
err_i2c_reg:
if (cam->sensor.sysfs_ops)
- class_device_remove_file(classdev, &class_device_attr_i2c_reg);
+ device_remove_file(classdev, &dev_attr_i2c_reg);
err_val:
- class_device_remove_file(classdev, &class_device_attr_val);
+ device_remove_file(classdev, &dev_attr_val);
err_reg:
- class_device_remove_file(classdev, &class_device_attr_reg);
+ device_remove_file(classdev, &dev_attr_reg);
err_out:
return err;
}
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 2d709e06467..d98dd0d1e37 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -10,6 +10,8 @@
* Ulrich Mueller <ulrich.mueller42@web.de>
* modified for em2820 based USB TV tuners by
* Markus Rechberger <mrechberger@gmail.com>
+ * modified for DViCO Fusion HDTV 5 RT GOLD by
+ * Chaogui Zhang <czhang1974@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -28,7 +30,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
@@ -142,6 +143,30 @@ static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
return 1;
}
+static int get_key_fusionhdtv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+ unsigned char buf[4];
+
+ /* poll IR chip */
+ if (4 != i2c_master_recv(&ir->c,buf,4)) {
+ dprintk(1,"read error\n");
+ return -EIO;
+ }
+
+ if(buf[0] !=0 || buf[1] !=0 || buf[2] !=0 || buf[3] != 0)
+ dprintk(2, "%s: 0x%2x 0x%2x 0x%2x 0x%2x\n", __FUNCTION__,
+ buf[0], buf[1], buf[2], buf[3]);
+
+ /* no key pressed or signal from other ir remote */
+ if(buf[0] != 0x1 || buf[1] != 0xfe)
+ return 0;
+
+ *ir_key = buf[2];
+ *ir_raw = (buf[2] << 8) | buf[3];
+
+ return 1;
+}
+
static int get_key_knc1(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
unsigned char b;
@@ -364,6 +389,12 @@ static int ir_attach(struct i2c_adapter *adap, int addr,
ir_type = IR_TYPE_OTHER;
ir_codes = ir_codes_empty;
break;
+ case 0x6b:
+ name = "FusionHDTV";
+ ir->get_key = get_key_fusionhdtv;
+ ir_type = IR_TYPE_RC5;
+ ir_codes = ir_codes_fusionhdtv_mce;
+ break;
case 0x7a:
case 0x47:
case 0x71:
@@ -475,7 +506,8 @@ static int ir_probe(struct i2c_adapter *adap)
static const int probe_bttv[] = { 0x1a, 0x18, 0x4b, 0x64, 0x30, -1};
static const int probe_saa7134[] = { 0x7a, 0x47, 0x71, -1 };
static const int probe_em28XX[] = { 0x30, 0x47, -1 };
- static const int probe_cx88[] = { 0x18, 0x71, -1 };
+ static const int probe_cx88[] = { 0x18, 0x6b, 0x71, -1 };
+ static const int probe_cx23885[] = { 0x6b, -1 };
const int *probe = NULL;
struct i2c_client c;
unsigned char buf;
@@ -496,6 +528,8 @@ static int ir_probe(struct i2c_adapter *adap)
break;
case I2C_HW_B_CX2388x:
probe = probe_cx88;
+ case I2C_HW_B_CX23885:
+ probe = probe_cx23885;
break;
}
if (NULL == probe)
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index e43beb2c9cb..854cc9c30ca 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -14,6 +14,7 @@ config VIDEO_IVTV
select VIDEO_CS53L32A
select VIDEO_WM8775
select VIDEO_WM8739
+ select VIDEO_VP27SMPX
select VIDEO_UPD64031A
select VIDEO_UPD64083
---help---
@@ -25,3 +26,19 @@ config VIDEO_IVTV
To compile this driver as a module, choose M here: the
module will be called ivtv.
+
+config VIDEO_FB_IVTV
+ tristate "Conexant cx23415 framebuffer support"
+ depends on VIDEO_IVTV && FB && EXPERIMENTAL
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ This is a framebuffer driver for the Conexant cx23415 MPEG
+ encoder/decoder.
+
+ This is used in the Hauppauge PVR-350 card. There is a driver
+ homepage at <http://www.ivtvdriver.org>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ivtvfb.
diff --git a/drivers/media/video/ivtv/Makefile b/drivers/media/video/ivtv/Makefile
index 7e95148fbf4..e8eefd96d89 100644
--- a/drivers/media/video/ivtv/Makefile
+++ b/drivers/media/video/ivtv/Makefile
@@ -1,7 +1,8 @@
-ivtv-objs := ivtv-audio.o ivtv-cards.o ivtv-controls.o \
+ivtv-objs := ivtv-routing.o ivtv-cards.o ivtv-controls.o \
ivtv-driver.o ivtv-fileops.o ivtv-firmware.o \
ivtv-gpio.o ivtv-i2c.o ivtv-ioctl.o ivtv-irq.o \
ivtv-mailbox.o ivtv-queue.o ivtv-streams.o ivtv-udma.o \
- ivtv-vbi.o ivtv-video.o ivtv-yuv.o
+ ivtv-vbi.o ivtv-yuv.o
obj-$(CONFIG_VIDEO_IVTV) += ivtv.o
+obj-$(CONFIG_VIDEO_FB_IVTV) += ivtvfb.o
diff --git a/drivers/media/video/ivtv/ivtv-audio.c b/drivers/media/video/ivtv/ivtv-audio.c
deleted file mode 100644
index d702b8b539a..00000000000
--- a/drivers/media/video/ivtv/ivtv-audio.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- Audio-related ivtv functions.
- Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
- Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include "ivtv-driver.h"
-#include "ivtv-mailbox.h"
-#include "ivtv-i2c.h"
-#include "ivtv-gpio.h"
-#include "ivtv-cards.h"
-#include "ivtv-audio.h"
-#include <media/msp3400.h>
-#include <linux/videodev.h>
-
-/* Selects the audio input and output according to the current
- settings. */
-int ivtv_audio_set_io(struct ivtv *itv)
-{
- struct v4l2_routing route;
- u32 audio_input;
- int mux_input;
-
- /* Determine which input to use */
- if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags)) {
- audio_input = itv->card->radio_input.audio_input;
- mux_input = itv->card->radio_input.muxer_input;
- } else {
- audio_input = itv->card->audio_inputs[itv->audio_input].audio_input;
- mux_input = itv->card->audio_inputs[itv->audio_input].muxer_input;
- }
-
- /* handle muxer chips */
- route.input = mux_input;
- route.output = 0;
- ivtv_i2c_hw(itv, itv->card->hw_muxer, VIDIOC_INT_S_AUDIO_ROUTING, &route);
-
- route.input = audio_input;
- if (itv->card->hw_audio & IVTV_HW_MSP34XX) {
- route.output = MSP_OUTPUT(MSP_SC_IN_DSP_SCART1);
- }
- return ivtv_i2c_hw(itv, itv->card->hw_audio, VIDIOC_INT_S_AUDIO_ROUTING, &route);
-}
-
-void ivtv_audio_set_route(struct ivtv *itv, struct v4l2_routing *route)
-{
- ivtv_i2c_hw(itv, itv->card->hw_audio, VIDIOC_INT_S_AUDIO_ROUTING, route);
-}
-
-void ivtv_audio_set_audio_clock_freq(struct ivtv *itv, u8 freq)
-{
- static u32 freqs[3] = { 44100, 48000, 32000 };
-
- /* The audio clock of the digitizer must match the codec sample
- rate otherwise you get some very strange effects. */
- if (freq > 2)
- return;
- ivtv_call_i2c_clients(itv, VIDIOC_INT_AUDIO_CLOCK_FREQ, &freqs[freq]);
-}
-
diff --git a/drivers/media/video/ivtv/ivtv-audio.h b/drivers/media/video/ivtv/ivtv-audio.h
deleted file mode 100644
index 9c42846d812..00000000000
--- a/drivers/media/video/ivtv/ivtv-audio.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- Audio-related ivtv functions.
- Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
- Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-int ivtv_audio_set_io(struct ivtv *itv);
-void ivtv_audio_set_route(struct ivtv *itv, struct v4l2_routing *route);
-void ivtv_audio_set_audio_clock_freq(struct ivtv *itv, u8 freq);
diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c
index 8eab0208388..b6a8be622d3 100644
--- a/drivers/media/video/ivtv/ivtv-cards.c
+++ b/drivers/media/video/ivtv/ivtv-cards.c
@@ -616,7 +616,7 @@ static const struct ivtv_card ivtv_card_gv_mvprx = {
.hw_video = IVTV_HW_SAA7115 | IVTV_HW_UPD64031A | IVTV_HW_UPD6408X,
.hw_audio = IVTV_HW_GPIO,
.hw_audio_ctrl = IVTV_HW_WM8739,
- .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7115 | IVTV_HW_TVAUDIO |
+ .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7115 | IVTV_HW_VP27SMPX |
IVTV_HW_TUNER | IVTV_HW_WM8739 |
IVTV_HW_UPD64031A | IVTV_HW_UPD6408X,
.video_inputs = {
@@ -654,7 +654,7 @@ static const struct ivtv_card ivtv_card_gv_mvprx2e = {
.hw_audio = IVTV_HW_GPIO,
.hw_audio_ctrl = IVTV_HW_WM8739,
.hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7115 | IVTV_HW_TUNER |
- IVTV_HW_TVAUDIO | IVTV_HW_WM8739,
+ IVTV_HW_VP27SMPX | IVTV_HW_WM8739,
.video_inputs = {
{ IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 },
{ IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 },
@@ -823,9 +823,7 @@ static const struct ivtv_card ivtv_card_dctmvtvp1 = {
/* ------------------------------------------------------------------------- */
-#ifdef HAVE_XC3028
-
-/* Yuan PG600-2/GotView PCI DVD Lite/Club3D ZAP-TV1x01 cards */
+/* Yuan PG600-2/GotView PCI DVD Lite cards */
static const struct ivtv_card_pci_info ivtv_pci_pg600v2[] = {
{ PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_YUAN3, 0x0600 },
@@ -835,29 +833,87 @@ static const struct ivtv_card_pci_info ivtv_pci_pg600v2[] = {
static const struct ivtv_card ivtv_card_pg600v2 = {
.type = IVTV_CARD_PG600V2,
- .name = "Yuan PG600-2, GotView PCI DVD Lite, Club3D ZAP-TV1x01",
+ .name = "Yuan PG600-2, GotView PCI DVD Lite",
.v4l2_capabilities = IVTV_CAP_ENCODER,
.hw_video = IVTV_HW_CX25840,
.hw_audio = IVTV_HW_CX25840,
.hw_audio_ctrl = IVTV_HW_CX25840,
.hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER,
.video_inputs = {
- { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 },
- { IVTV_CARD_INPUT_SVIDEO1, 1,
+ { IVTV_CARD_INPUT_SVIDEO1, 0,
CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 },
+ { IVTV_CARD_INPUT_COMPOSITE1, 0, CX25840_COMPOSITE1 },
},
.audio_inputs = {
- { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 },
{ IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL },
},
- .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 },
.tuners = {
{ .std = V4L2_STD_ALL, .tuner = TUNER_XCEIVE_XC3028 },
},
- .gpio_init = { .direction = 0x1000, .initial_value = 0x1000 }, /* tuner reset */
.pci_list = ivtv_pci_pg600v2,
};
-#endif
+
+/* ------------------------------------------------------------------------- */
+
+/* Club3D ZAP-TV1x01 cards */
+
+static const struct ivtv_card_pci_info ivtv_pci_club3d[] = {
+ { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_YUAN3, 0x0600 },
+ { 0, 0, 0 }
+};
+
+static const struct ivtv_card ivtv_card_club3d = {
+ .type = IVTV_CARD_CLUB3D,
+ .name = "Club3D ZAP-TV1x01",
+ .v4l2_capabilities = IVTV_CAP_ENCODER,
+ .hw_video = IVTV_HW_CX25840,
+ .hw_audio = IVTV_HW_CX25840,
+ .hw_audio_ctrl = IVTV_HW_CX25840,
+ .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER,
+ .video_inputs = {
+ { IVTV_CARD_INPUT_SVIDEO1, 0,
+ CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 },
+ { IVTV_CARD_INPUT_COMPOSITE1, 0, CX25840_COMPOSITE3 },
+ },
+ .audio_inputs = {
+ { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL },
+ },
+ .tuners = {
+ { .std = V4L2_STD_ALL, .tuner = TUNER_XCEIVE_XC3028 },
+ },
+ .pci_list = ivtv_pci_club3d,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* AVerTV MCE 116 Plus (M116) card */
+
+static const struct ivtv_card_pci_info ivtv_pci_avertv_mce116[] = {
+ { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc439 },
+ { 0, 0, 0 }
+};
+
+static const struct ivtv_card ivtv_card_avertv_mce116 = {
+ .type = IVTV_CARD_AVERTV_MCE116,
+ .name = "AVerTV MCE 116 Plus",
+ .v4l2_capabilities = IVTV_CAP_ENCODER,
+ .hw_video = IVTV_HW_CX25840,
+ .hw_audio = IVTV_HW_CX25840,
+ .hw_audio_ctrl = IVTV_HW_CX25840,
+ .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER | IVTV_HW_WM8739,
+ .video_inputs = {
+ { IVTV_CARD_INPUT_SVIDEO1, 0, CX25840_SVIDEO3 },
+ { IVTV_CARD_INPUT_COMPOSITE1, 0, CX25840_COMPOSITE1 },
+ },
+ .audio_inputs = {
+ { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 },
+ },
+ .gpio_init = { .direction = 0xe000, .initial_value = 0x4000 }, /* enable line-in */
+ .tuners = {
+ { .std = V4L2_STD_ALL, .tuner = TUNER_XCEIVE_XC3028 },
+ },
+ .pci_list = ivtv_pci_avertv_mce116,
+};
static const struct ivtv_card *ivtv_card_list[] = {
&ivtv_card_pvr250,
@@ -878,9 +934,9 @@ static const struct ivtv_card *ivtv_card_list[] = {
&ivtv_card_gotview_pci_dvd2,
&ivtv_card_yuan_mpc622,
&ivtv_card_dctmvtvp1,
-#ifdef HAVE_XC3028
&ivtv_card_pg600v2,
-#endif
+ &ivtv_card_club3d,
+ &ivtv_card_avertv_mce116,
/* Variations of standard cards but with the same PCI IDs.
These cards must come last in this list. */
diff --git a/drivers/media/video/ivtv/ivtv-cards.h b/drivers/media/video/ivtv/ivtv-cards.h
index 91e9e90c14a..ff46e5ae865 100644
--- a/drivers/media/video/ivtv/ivtv-cards.h
+++ b/drivers/media/video/ivtv/ivtv-cards.h
@@ -18,6 +18,68 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_CARDS_H
+#define IVTV_CARDS_H
+
+/* Supported cards */
+#define IVTV_CARD_PVR_250 0 /* WinTV PVR 250 */
+#define IVTV_CARD_PVR_350 1 /* encoder, decoder, tv-out */
+#define IVTV_CARD_PVR_150 2 /* WinTV PVR 150 and PVR 500 (really just two
+ PVR150s on one PCI board) */
+#define IVTV_CARD_M179 3 /* AVerMedia M179 (encoder only) */
+#define IVTV_CARD_MPG600 4 /* Kuroutoshikou ITVC16-STVLP/YUAN MPG600, encoder only */
+#define IVTV_CARD_MPG160 5 /* Kuroutoshikou ITVC15-STVLP/YUAN MPG160
+ cx23415 based, but does not have tv-out */
+#define IVTV_CARD_PG600 6 /* YUAN PG600/DIAMONDMM PVR-550 based on the CX Falcon 2 */
+#define IVTV_CARD_AVC2410 7 /* Adaptec AVC-2410 */
+#define IVTV_CARD_AVC2010 8 /* Adaptec AVD-2010 (No Tuner) */
+#define IVTV_CARD_TG5000TV 9 /* NAGASE TRANSGEAR 5000TV, encoder only */
+#define IVTV_CARD_VA2000MAX_SNT6 10 /* VA2000MAX-STN6 */
+#define IVTV_CARD_CX23416GYC 11 /* Kuroutoshikou CX23416GYC-STVLP (Yuan MPG600GR OEM) */
+#define IVTV_CARD_GV_MVPRX 12 /* I/O Data GV-MVP/RX, RX2, RX2W */
+#define IVTV_CARD_GV_MVPRX2E 13 /* I/O Data GV-MVP/RX2E */
+#define IVTV_CARD_GOTVIEW_PCI_DVD 14 /* GotView PCI DVD */
+#define IVTV_CARD_GOTVIEW_PCI_DVD2 15 /* GotView PCI DVD2 */
+#define IVTV_CARD_YUAN_MPC622 16 /* Yuan MPC622 miniPCI */
+#define IVTV_CARD_DCTMTVP1 17 /* DIGITAL COWBOY DCT-MTVP1 */
+#define IVTV_CARD_PG600V2 18 /* Yuan PG600V2/GotView PCI DVD Lite */
+#define IVTV_CARD_CLUB3D 19 /* Club3D ZAP-TV1x01 */
+#define IVTV_CARD_AVERTV_MCE116 20 /* AVerTV MCE 116 Plus */
+#define IVTV_CARD_LAST 20
+
+/* Variants of existing cards but with the same PCI IDs. The driver
+ detects these based on other device information.
+ These cards must always come last.
+ New cards must be inserted above, and the indices of the cards below
+ must be adjusted accordingly. */
+
+/* PVR-350 V1 (uses saa7114) */
+#define IVTV_CARD_PVR_350_V1 (IVTV_CARD_LAST+1)
+/* 2 variants of Kuroutoshikou CX23416GYC-STVLP (Yuan MPG600GR OEM) */
+#define IVTV_CARD_CX23416GYC_NOGR (IVTV_CARD_LAST+2)
+#define IVTV_CARD_CX23416GYC_NOGRYCS (IVTV_CARD_LAST+3)
+
+/* system vendor and device IDs */
+#define PCI_VENDOR_ID_ICOMP 0x4444
+#define PCI_DEVICE_ID_IVTV15 0x0803
+#define PCI_DEVICE_ID_IVTV16 0x0016
+
+/* subsystem vendor ID */
+#define IVTV_PCI_ID_HAUPPAUGE 0x0070
+#define IVTV_PCI_ID_HAUPPAUGE_ALT1 0x0270
+#define IVTV_PCI_ID_HAUPPAUGE_ALT2 0x4070
+#define IVTV_PCI_ID_ADAPTEC 0x9005
+#define IVTV_PCI_ID_AVERMEDIA 0x1461
+#define IVTV_PCI_ID_YUAN1 0x12ab
+#define IVTV_PCI_ID_YUAN2 0xff01
+#define IVTV_PCI_ID_YUAN3 0xffab
+#define IVTV_PCI_ID_YUAN4 0xfbab
+#define IVTV_PCI_ID_DIAMONDMM 0xff92
+#define IVTV_PCI_ID_IODATA 0x10fc
+#define IVTV_PCI_ID_MELCO 0x1154
+#define IVTV_PCI_ID_GOTVIEW1 0xffac
+#define IVTV_PCI_ID_GOTVIEW2 0xffad
+
/* hardware flags */
#define IVTV_HW_CX25840 (1 << 0)
#define IVTV_HW_SAA7115 (1 << 1)
@@ -33,7 +95,8 @@
#define IVTV_HW_UPD6408X (1 << 11)
#define IVTV_HW_SAA717X (1 << 12)
#define IVTV_HW_WM8739 (1 << 13)
-#define IVTV_HW_GPIO (1 << 14)
+#define IVTV_HW_VP27SMPX (1 << 14)
+#define IVTV_HW_GPIO (1 << 15)
#define IVTV_HW_SAA711X (IVTV_HW_SAA7115 | IVTV_HW_SAA7114)
@@ -205,3 +268,5 @@ int ivtv_get_output(struct ivtv *itv, u16 index, struct v4l2_output *output);
int ivtv_get_audio_input(struct ivtv *itv, u16 index, struct v4l2_audio *input);
int ivtv_get_audio_output(struct ivtv *itv, u16 index, struct v4l2_audioout *output);
const struct ivtv_card *ivtv_get_card(u16 index);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c
index 7a876c3e5b1..8c02fa66159 100644
--- a/drivers/media/video/ivtv/ivtv-controls.c
+++ b/drivers/media/video/ivtv/ivtv-controls.c
@@ -21,7 +21,7 @@
#include "ivtv-driver.h"
#include "ivtv-cards.h"
#include "ivtv-ioctl.h"
-#include "ivtv-audio.h"
+#include "ivtv-routing.h"
#include "ivtv-i2c.h"
#include "ivtv-mailbox.h"
#include "ivtv-controls.h"
@@ -231,8 +231,10 @@ int ivtv_control_ioctls(struct ivtv *itv, unsigned int cmd, void *arg)
}
IVTV_DEBUG_IOCTL("VIDIOC_S_EXT_CTRLS\n");
if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) {
+ static u32 freqs[3] = { 44100, 48000, 32000 };
struct cx2341x_mpeg_params p = itv->params;
- int err = cx2341x_ext_ctrls(&p, arg, cmd);
+ int err = cx2341x_ext_ctrls(&p, atomic_read(&itv->capturing), arg, cmd);
+ unsigned idx;
if (err)
return err;
@@ -254,7 +256,11 @@ int ivtv_control_ioctls(struct ivtv *itv, unsigned int cmd, void *arg)
}
itv->params = p;
itv->dualwatch_stereo_mode = p.audio_properties & 0x0300;
- ivtv_audio_set_audio_clock_freq(itv, p.audio_properties & 0x03);
+ idx = p.audio_properties & 0x03;
+ /* The audio clock of the digitizer must match the codec sample
+ rate otherwise you get some very strange effects. */
+ if (idx < sizeof(freqs))
+ ivtv_call_i2c_clients(itv, VIDIOC_INT_AUDIO_CLOCK_FREQ, &freqs[idx]);
return err;
}
return -EINVAL;
@@ -282,7 +288,7 @@ int ivtv_control_ioctls(struct ivtv *itv, unsigned int cmd, void *arg)
}
IVTV_DEBUG_IOCTL("VIDIOC_G_EXT_CTRLS\n");
if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG)
- return cx2341x_ext_ctrls(&itv->params, arg, cmd);
+ return cx2341x_ext_ctrls(&itv->params, 0, arg, cmd);
return -EINVAL;
}
@@ -292,7 +298,7 @@ int ivtv_control_ioctls(struct ivtv *itv, unsigned int cmd, void *arg)
IVTV_DEBUG_IOCTL("VIDIOC_TRY_EXT_CTRLS\n");
if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG)
- return cx2341x_ext_ctrls(&itv->params, arg, cmd);
+ return cx2341x_ext_ctrls(&itv->params, atomic_read(&itv->capturing), arg, cmd);
return -EINVAL;
}
diff --git a/drivers/media/video/ivtv/ivtv-controls.h b/drivers/media/video/ivtv/ivtv-controls.h
index 5a11149725a..bb8a6a5ed2b 100644
--- a/drivers/media/video/ivtv/ivtv-controls.h
+++ b/drivers/media/video/ivtv/ivtv-controls.h
@@ -18,4 +18,9 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_CONTROLS_H
+#define IVTV_CONTROLS_H
+
int ivtv_control_ioctls(struct ivtv *itv, unsigned int cmd, void *arg);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index d73d433a4ff..511a6625241 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -52,11 +52,12 @@
#include "ivtv-ioctl.h"
#include "ivtv-cards.h"
#include "ivtv-vbi.h"
-#include "ivtv-audio.h"
+#include "ivtv-routing.h"
#include "ivtv-gpio.h"
#include "ivtv-yuv.h"
#include <media/tveeprom.h>
+#include <media/saa7115.h>
#include <media/v4l2-chip-ident.h>
/* var to keep track of the number of array elements in use */
@@ -86,17 +87,16 @@ static struct pci_device_id ivtv_pci_tbl[] __devinitdata = {
MODULE_DEVICE_TABLE(pci,ivtv_pci_tbl);
-const u32 yuv_offset[4] = {
- IVTV_YUV_BUFFER_OFFSET,
- IVTV_YUV_BUFFER_OFFSET_1,
- IVTV_YUV_BUFFER_OFFSET_2,
- IVTV_YUV_BUFFER_OFFSET_3
-};
-
/* Parameter declarations */
static int cardtype[IVTV_MAX_CARDS];
-static int tuner[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 };
-static int radio[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 };
+static int tuner[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1 };
+static int radio[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1 };
static int cardtype_c = 1;
static int tuner_c = 1;
@@ -106,6 +106,18 @@ static char secam[] = "--";
static char ntsc[] = "-";
/* Buffers */
+
+/* DMA Buffers, Default size in MB allocated */
+#define IVTV_DEFAULT_ENC_MPG_BUFFERS 4
+#define IVTV_DEFAULT_ENC_YUV_BUFFERS 2
+#define IVTV_DEFAULT_ENC_VBI_BUFFERS 1
+/* Exception: size in kB for this stream (MB is overkill) */
+#define IVTV_DEFAULT_ENC_PCM_BUFFERS 320
+#define IVTV_DEFAULT_DEC_MPG_BUFFERS 1
+#define IVTV_DEFAULT_DEC_YUV_BUFFERS 1
+/* Exception: size in kB for this stream (MB is way overkill) */
+#define IVTV_DEFAULT_DEC_VBI_BUFFERS 64
+
static int enc_mpg_buffers = IVTV_DEFAULT_ENC_MPG_BUFFERS;
static int enc_yuv_buffers = IVTV_DEFAULT_ENC_YUV_BUFFERS;
static int enc_vbi_buffers = IVTV_DEFAULT_ENC_VBI_BUFFERS;
@@ -170,17 +182,27 @@ MODULE_PARM_DESC(cardtype,
"\t\t\t16 = GOTVIEW PCI DVD2 Deluxe\n"
"\t\t\t17 = Yuan MPC622\n"
"\t\t\t18 = Digital Cowboy DCT-MTVP1\n"
-#ifdef HAVE_XC3028
- "\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite/Club3D ZAP-TV1x01\n"
-#endif
+ "\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite\n"
+ "\t\t\t20 = Club3D ZAP-TV1x01\n"
+ "\t\t\t21 = AverTV MCE 116 Plus\n"
"\t\t\t 0 = Autodetect (default)\n"
"\t\t\t-1 = Ignore this card\n\t\t");
MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
MODULE_PARM_DESC(secam, "Set SECAM standard: B, G, H, D, K, L, LC");
MODULE_PARM_DESC(ntsc, "Set NTSC standard: M, J, K");
MODULE_PARM_DESC(debug,
- "Debug level (bitmask). Default: errors only\n"
- "\t\t\t(debug = 1023 gives full debugging)");
+ "Debug level (bitmask). Default: 0\n"
+ "\t\t\t 1/0x0001: warning\n"
+ "\t\t\t 2/0x0002: info\n"
+ "\t\t\t 4/0x0004: mailbox\n"
+ "\t\t\t 8/0x0008: ioctl\n"
+ "\t\t\t 16/0x0010: file\n"
+ "\t\t\t 32/0x0020: dma\n"
+ "\t\t\t 64/0x0040: irq\n"
+ "\t\t\t 128/0x0080: decoder\n"
+ "\t\t\t 256/0x0100: yuv\n"
+ "\t\t\t 512/0x0200: i2c\n"
+ "\t\t\t1024/0x0400: high volume\n");
MODULE_PARM_DESC(ivtv_pci_latency,
"Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
"\t\t\tDefault: Yes");
@@ -201,7 +223,7 @@ MODULE_PARM_DESC(enc_vbi_buffers,
"Encoder VBI Buffers (in MB)\n"
"\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_VBI_BUFFERS));
MODULE_PARM_DESC(enc_pcm_buffers,
- "Encoder PCM buffers (in MB)\n"
+ "Encoder PCM buffers (in kB)\n"
"\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_PCM_BUFFERS));
MODULE_PARM_DESC(dec_mpg_buffers,
"Decoder MPG buffers (in MB)\n"
@@ -210,7 +232,7 @@ MODULE_PARM_DESC(dec_yuv_buffers,
"Decoder YUV buffers (in MB)\n"
"\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_YUV_BUFFERS));
MODULE_PARM_DESC(dec_vbi_buffers,
- "Decoder VBI buffers (in MB)\n"
+ "Decoder VBI buffers (in kB)\n"
"\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_VBI_BUFFERS));
MODULE_PARM_DESC(newi2c,
"Use new I2C implementation\n"
@@ -540,13 +562,13 @@ static void ivtv_process_options(struct ivtv *itv)
const char *chipname;
int i, j;
- itv->options.megabytes[IVTV_ENC_STREAM_TYPE_MPG] = enc_mpg_buffers;
- itv->options.megabytes[IVTV_ENC_STREAM_TYPE_YUV] = enc_yuv_buffers;
- itv->options.megabytes[IVTV_ENC_STREAM_TYPE_VBI] = enc_vbi_buffers;
- itv->options.megabytes[IVTV_ENC_STREAM_TYPE_PCM] = enc_pcm_buffers;
- itv->options.megabytes[IVTV_DEC_STREAM_TYPE_MPG] = dec_mpg_buffers;
- itv->options.megabytes[IVTV_DEC_STREAM_TYPE_YUV] = dec_yuv_buffers;
- itv->options.megabytes[IVTV_DEC_STREAM_TYPE_VBI] = dec_vbi_buffers;
+ itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_MPG] = enc_mpg_buffers * 1024;
+ itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_YUV] = enc_yuv_buffers * 1024;
+ itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_VBI] = enc_vbi_buffers * 1024;
+ itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_PCM] = enc_pcm_buffers;
+ itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_MPG] = dec_mpg_buffers * 1024;
+ itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_YUV] = dec_yuv_buffers * 1024;
+ itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_VBI] = dec_vbi_buffers;
itv->options.cardtype = cardtype[itv->num];
itv->options.tuner = tuner[itv->num];
itv->options.radio = radio[itv->num];
@@ -645,7 +667,7 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv)
cx2341x_fill_defaults(&itv->params);
itv->params.port = CX2341X_PORT_MEMORY;
itv->params.capabilities = CX2341X_CAP_HAS_SLICED_VBI;
- init_waitqueue_head(&itv->cap_w);
+ init_waitqueue_head(&itv->eos_waitq);
init_waitqueue_head(&itv->event_waitq);
init_waitqueue_head(&itv->vsync_waitq);
init_waitqueue_head(&itv->dma_waitq);
@@ -691,14 +713,6 @@ static void __devinit ivtv_init_struct2(struct ivtv *itv)
break;
itv->nof_audio_inputs = i;
- /* 0x00EF = saa7114(239) 0x00F0 = saa7115(240) 0x0106 = micro */
- if (itv->card->hw_all & (IVTV_HW_SAA7115 | IVTV_HW_SAA717X))
- itv->digitizer = 0xF1;
- else if (itv->card->hw_all & IVTV_HW_SAA7114)
- itv->digitizer = 0xEF;
- else /* cx25840 */
- itv->digitizer = 0x140;
-
if (itv->card->hw_all & IVTV_HW_CX25840) {
itv->vbi.sliced_size = 288; /* multiple of 16, real size = 284 */
} else {
@@ -727,6 +741,7 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *dev,
const struct pci_device_id *pci_id)
{
u16 cmd;
+ u8 card_rev;
unsigned char pci_latency;
IVTV_DEBUG_INFO("Enabling pci device\n");
@@ -773,7 +788,7 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *dev,
}
IVTV_DEBUG_INFO("Bus Mastering Enabled.\n");
- pci_read_config_byte(dev, PCI_CLASS_REVISION, &itv->card_rev);
+ pci_read_config_byte(dev, PCI_CLASS_REVISION, &card_rev);
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &pci_latency);
if (pci_latency < 64 && ivtv_pci_latency) {
@@ -790,7 +805,7 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *dev,
IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
"irq: %d, latency: %d, memory: 0x%lx\n",
- itv->dev->device, itv->card_rev, dev->bus->number,
+ itv->dev->device, card_rev, dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
itv->dev->irq, pci_latency, (unsigned long)itv->base_addr);
@@ -808,18 +823,19 @@ static void ivtv_request_module(struct ivtv *itv, const char *name)
static void ivtv_load_and_init_modules(struct ivtv *itv)
{
- struct v4l2_control ctrl;
u32 hw = itv->card->hw_all;
int i;
/* load modules */
#ifndef CONFIG_VIDEO_TUNER
if (hw & IVTV_HW_TUNER) {
- ivtv_request_module(itv, "tuner");
-#ifdef HAVE_XC3028
- if (itv->options.tuner == TUNER_XCEIVE_XC3028)
- ivtv_request_module(itv, "xc3028-tuner");
-#endif
+ if (itv->options.tuner == TUNER_XCEIVE_XC3028) {
+ IVTV_INFO("Xceive tuner not yet supported, only composite and S-Video inputs will be available\n");
+ itv->tunerid = 1;
+ }
+ else {
+ ivtv_request_module(itv, "tuner");
+ }
}
#endif
#ifndef CONFIG_VIDEO_CX25840
@@ -848,6 +864,10 @@ static void ivtv_load_and_init_modules(struct ivtv *itv)
if (hw & IVTV_HW_MSP34XX)
ivtv_request_module(itv, "msp3400");
#endif
+#ifndef CONFIG_VIDEO_VP27SMPX
+ if (hw & IVTV_HW_VP27SMPX)
+ ivtv_request_module(itv, "vp27smpx");
+#endif
if (hw & IVTV_HW_TVAUDIO)
ivtv_request_module(itv, "tvaudio");
#ifndef CONFIG_VIDEO_WM8775
@@ -888,13 +908,17 @@ static void ivtv_load_and_init_modules(struct ivtv *itv)
else if ((hw & IVTV_HW_UPD64031A) == 0)
itv->card = ivtv_get_card(IVTV_CARD_CX23416GYC_NOGR);
}
+ else if (itv->card->type == IVTV_CARD_GV_MVPRX ||
+ itv->card->type == IVTV_CARD_GV_MVPRX2E) {
+ struct v4l2_crystal_freq crystal_freq;
+
+ /* The crystal frequency of GVMVPRX is 24.576MHz */
+ crystal_freq.freq = SAA7115_FREQ_24_576_MHZ;
+ crystal_freq.flags = SAA7115_FREQ_FL_UCGC;
+ itv->video_dec_func(itv, VIDIOC_INT_S_CRYSTAL_FREQ, &crystal_freq);
+ }
if (hw & IVTV_HW_CX25840) {
- /* CX25840_CID_ENABLE_PVR150_WORKAROUND */
- ctrl.id = V4L2_CID_PRIVATE_BASE;
- ctrl.value = itv->pvr150_workaround;
- itv->video_dec_func(itv, VIDIOC_S_CTRL, &ctrl);
-
itv->vbi.raw_decoder_line_size = 1444;
itv->vbi.raw_decoder_sav_odd_field = 0x20;
itv->vbi.raw_decoder_sav_even_field = 0x60;
@@ -940,12 +964,9 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
const struct pci_device_id *pci_id)
{
int retval = 0;
- int video_input;
int yuv_buf_size;
int vbi_buf_size;
- int fw_retry_count = 3;
struct ivtv *itv;
- struct v4l2_frequency vf;
spin_lock(&ivtv_cards_lock);
@@ -982,6 +1003,8 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr);
+ mutex_lock(&itv->serialize_lock);
+
/* PCI Device Setup */
if ((retval = ivtv_setup_pci(itv, dev, pci_id)) != 0) {
if (retval == -EIO)
@@ -1032,22 +1055,6 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
goto free_io;
}
- while (--fw_retry_count > 0) {
- /* load firmware */
- if (ivtv_firmware_init(itv) == 0)
- break;
- if (fw_retry_count > 1)
- IVTV_WARN("Retry loading firmware\n");
- }
- if (fw_retry_count == 0) {
- IVTV_ERR("Error initializing firmware\n");
- goto free_i2c;
- }
-
- /* Try and get firmware versions */
- IVTV_DEBUG_INFO("Getting firmware version..\n");
- ivtv_firmware_versions(itv);
-
/* Check yuv output filter table */
if (itv->has_cx23415) ivtv_yuv_filter_check(itv);
@@ -1135,43 +1142,22 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
if (itv->options.radio > 0)
itv->v4l2_cap |= V4L2_CAP_RADIO;
- if (itv->options.tuner > -1) {
+ if (itv->options.tuner > -1 && itv->tunerid == 0) {
struct tuner_setup setup;
setup.addr = ADDR_UNSET;
setup.type = itv->options.tuner;
setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */
-#ifdef HAVE_XC3028
- setup.initmode = V4L2_TUNER_ANALOG_TV;
- if (itv->options.tuner == TUNER_XCEIVE_XC3028) {
- setup.gpio_write = ivtv_reset_tuner_gpio;
- setup.gpio_priv = itv;
- }
-#endif
ivtv_call_i2c_clients(itv, TUNER_SET_TYPE_ADDR, &setup);
}
- vf.tuner = 0;
- vf.type = V4L2_TUNER_ANALOG_TV;
- vf.frequency = 6400; /* the tuner 'baseline' frequency */
- if (itv->std & V4L2_STD_NTSC_M) {
- /* Why on earth? */
- vf.frequency = 1076; /* ch. 4 67250*16/1000 */
- }
-
/* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
are not. */
itv->tuner_std = itv->std;
- video_input = itv->active_input;
- itv->active_input++; /* Force update of input */
- ivtv_v4l2_ioctls(itv, NULL, VIDIOC_S_INPUT, &video_input);
-
- /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
- in one place. */
- itv->std++; /* Force full standard initialization */
- itv->std_out = itv->std;
- ivtv_v4l2_ioctls(itv, NULL, VIDIOC_S_FREQUENCY, &vf);
+ if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
+ ivtv_call_i2c_clients(itv, VIDIOC_INT_S_STD_OUTPUT, &itv->std);
+ }
retval = ivtv_streams_setup(itv);
if (retval) {
@@ -1179,11 +1165,6 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
goto free_i2c;
}
- if (itv->card->v4l2_capabilities & V4L2_CAP_VIDEO_OUTPUT) {
- ivtv_init_mpeg_decoder(itv);
- }
- ivtv_v4l2_ioctls(itv, NULL, VIDIOC_S_STD, &itv->tuner_std);
-
IVTV_DEBUG_IRQ("Masking interrupts\n");
/* clear interrupt mask, effectively disabling interrupts */
ivtv_set_irq_mask(itv, 0xffffffff);
@@ -1195,26 +1176,8 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
IVTV_ERR("Failed to register irq %d\n", retval);
goto free_streams;
}
-
- /* On a cx23416 this seems to be able to enable DMA to the chip? */
- if (!itv->has_cx23415)
- write_reg_sync(0x03, IVTV_REG_DMACONTROL);
-
- /* Default interrupts enabled. For the PVR350 this includes the
- decoder VSYNC interrupt, which is always on. It is not only used
- during decoding but also by the OSD.
- Some old PVR250 cards had a cx23415, so testing for that is too
- general. Instead test if the card has video output capability. */
- if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)
- ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT | IVTV_IRQ_DEC_VSYNC);
- else
- ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT);
-
- if (itv->has_cx23415)
- ivtv_set_osd_alpha(itv);
-
+ mutex_unlock(&itv->serialize_lock);
IVTV_INFO("Initialized card #%d: %s\n", itv->num, itv->card_name);
-
return 0;
free_irq:
@@ -1232,65 +1195,146 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
free_workqueue:
destroy_workqueue(itv->irq_work_queues);
+ mutex_unlock(&itv->serialize_lock);
err:
if (retval == 0)
retval = -ENODEV;
IVTV_ERR("Error %d on initialization\n", retval);
+ spin_lock(&ivtv_cards_lock);
kfree(ivtv_cards[ivtv_cards_active]);
ivtv_cards[ivtv_cards_active] = NULL;
+ spin_unlock(&ivtv_cards_lock);
return retval;
}
+int ivtv_init_on_first_open(struct ivtv *itv)
+{
+ struct v4l2_frequency vf;
+ int fw_retry_count = 3;
+ int video_input;
+
+ if (test_bit(IVTV_F_I_FAILED, &itv->i_flags))
+ return -ENXIO;
+
+ if (test_and_set_bit(IVTV_F_I_INITED, &itv->i_flags))
+ return 0;
+
+ while (--fw_retry_count > 0) {
+ /* load firmware */
+ if (ivtv_firmware_init(itv) == 0)
+ break;
+ if (fw_retry_count > 1)
+ IVTV_WARN("Retry loading firmware\n");
+ }
+
+ if (fw_retry_count == 0) {
+ set_bit(IVTV_F_I_FAILED, &itv->i_flags);
+ return -ENXIO;
+ }
+
+ /* Try and get firmware versions */
+ IVTV_DEBUG_INFO("Getting firmware version..\n");
+ ivtv_firmware_versions(itv);
+
+ if (itv->card->hw_all & IVTV_HW_CX25840) {
+ struct v4l2_control ctrl;
+
+ /* CX25840_CID_ENABLE_PVR150_WORKAROUND */
+ ctrl.id = V4L2_CID_PRIVATE_BASE;
+ ctrl.value = itv->pvr150_workaround;
+ itv->video_dec_func(itv, VIDIOC_S_CTRL, &ctrl);
+ }
+
+ vf.tuner = 0;
+ vf.type = V4L2_TUNER_ANALOG_TV;
+ vf.frequency = 6400; /* the tuner 'baseline' frequency */
+
+ /* Set initial frequency. For PAL/SECAM broadcasts no
+ 'default' channel exists AFAIK. */
+ if (itv->std == V4L2_STD_NTSC_M_JP) {
+ vf.frequency = 1460; /* ch. 1 91250*16/1000 */
+ }
+ else if (itv->std & V4L2_STD_NTSC_M) {
+ vf.frequency = 1076; /* ch. 4 67250*16/1000 */
+ }
+
+ video_input = itv->active_input;
+ itv->active_input++; /* Force update of input */
+ ivtv_v4l2_ioctls(itv, NULL, VIDIOC_S_INPUT, &video_input);
+
+ /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
+ in one place. */
+ itv->std++; /* Force full standard initialization */
+ itv->std_out = itv->std;
+ ivtv_v4l2_ioctls(itv, NULL, VIDIOC_S_FREQUENCY, &vf);
+
+ if (itv->card->v4l2_capabilities & V4L2_CAP_VIDEO_OUTPUT) {
+ ivtv_init_mpeg_decoder(itv);
+ }
+ ivtv_v4l2_ioctls(itv, NULL, VIDIOC_S_STD, &itv->tuner_std);
+
+ /* On a cx23416 this seems to be able to enable DMA to the chip? */
+ if (!itv->has_cx23415)
+ write_reg_sync(0x03, IVTV_REG_DMACONTROL);
+
+ /* Default interrupts enabled. For the PVR350 this includes the
+ decoder VSYNC interrupt, which is always on. It is not only used
+ during decoding but also by the OSD.
+ Some old PVR250 cards had a cx23415, so testing for that is too
+ general. Instead test if the card has video output capability. */
+ if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
+ ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT | IVTV_IRQ_DEC_VSYNC);
+ ivtv_set_osd_alpha(itv);
+ }
+ else
+ ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT);
+ return 0;
+}
+
static void ivtv_remove(struct pci_dev *pci_dev)
{
struct ivtv *itv = pci_get_drvdata(pci_dev);
IVTV_DEBUG_INFO("Removing Card #%d\n", itv->num);
- /* Stop all captures */
- IVTV_DEBUG_INFO("Stopping all streams\n");
- if (atomic_read(&itv->capturing) > 0)
- ivtv_stop_all_captures(itv);
-
- /* Stop all decoding */
- IVTV_DEBUG_INFO("Stopping decoding\n");
- if (atomic_read(&itv->decoding) > 0) {
- int type;
-
- if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags))
- type = IVTV_DEC_STREAM_TYPE_YUV;
- else
- type = IVTV_DEC_STREAM_TYPE_MPG;
- ivtv_stop_v4l2_decode_stream(&itv->streams[type],
- VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY, 0);
+ if (test_bit(IVTV_F_I_INITED, &itv->i_flags)) {
+ /* Stop all captures */
+ IVTV_DEBUG_INFO("Stopping all streams\n");
+ if (atomic_read(&itv->capturing) > 0)
+ ivtv_stop_all_captures(itv);
+
+ /* Stop all decoding */
+ IVTV_DEBUG_INFO("Stopping decoding\n");
+ if (atomic_read(&itv->decoding) > 0) {
+ int type;
+
+ if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags))
+ type = IVTV_DEC_STREAM_TYPE_YUV;
+ else
+ type = IVTV_DEC_STREAM_TYPE_MPG;
+ ivtv_stop_v4l2_decode_stream(&itv->streams[type],
+ VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY, 0);
+ }
+ ivtv_halt_firmware(itv);
}
/* Interrupts */
- IVTV_DEBUG_INFO("Disabling interrupts\n");
ivtv_set_irq_mask(itv, 0xffffffff);
del_timer_sync(&itv->dma_timer);
/* Stop all Work Queues */
- IVTV_DEBUG_INFO("Stop Work Queues\n");
flush_workqueue(itv->irq_work_queues);
destroy_workqueue(itv->irq_work_queues);
- IVTV_DEBUG_INFO("Stopping Firmware\n");
- ivtv_halt_firmware(itv);
-
- IVTV_DEBUG_INFO("Unregistering v4l devices\n");
ivtv_streams_cleanup(itv);
- IVTV_DEBUG_INFO("Freeing dma resources\n");
ivtv_udma_free(itv);
exit_ivtv_i2c(itv);
- IVTV_DEBUG_INFO(" Releasing irq\n");
free_irq(itv->dev->irq, (void *)itv);
ivtv_iounmap(itv);
- IVTV_DEBUG_INFO(" Releasing mem\n");
release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
if (itv->has_cx23415)
@@ -1322,9 +1366,9 @@ static int module_start(void)
return -1;
}
- if (ivtv_debug < 0 || ivtv_debug > 1023) {
+ if (ivtv_debug < 0 || ivtv_debug > 2047) {
ivtv_debug = 0;
- printk(KERN_INFO "ivtv: Debug value must be >= 0 and <= 1023\n");
+ printk(KERN_INFO "ivtv: Debug value must be >= 0 and <= 2047\n");
}
if (pci_register_driver(&ivtv_pci_driver)) {
@@ -1341,6 +1385,7 @@ static void module_cleanup(void)
pci_unregister_driver(&ivtv_pci_driver);
+ spin_lock(&ivtv_cards_lock);
for (i = 0; i < ivtv_cards_active; i++) {
if (ivtv_cards[i] == NULL)
continue;
@@ -1349,13 +1394,15 @@ static void module_cleanup(void)
}
kfree(ivtv_cards[i]);
}
+ spin_unlock(&ivtv_cards_lock);
}
-/* Note: These symbols are exported because they are used by the ivtv-fb
+/* Note: These symbols are exported because they are used by the ivtvfb
framebuffer module and an infrared module for the IR-blaster. */
EXPORT_SYMBOL(ivtv_set_irq_mask);
EXPORT_SYMBOL(ivtv_cards_active);
EXPORT_SYMBOL(ivtv_cards);
+EXPORT_SYMBOL(ivtv_cards_lock);
EXPORT_SYMBOL(ivtv_api);
EXPORT_SYMBOL(ivtv_vapi);
EXPORT_SYMBOL(ivtv_vapi_result);
@@ -1366,6 +1413,7 @@ EXPORT_SYMBOL(ivtv_udma_setup);
EXPORT_SYMBOL(ivtv_udma_unmap);
EXPORT_SYMBOL(ivtv_udma_alloc);
EXPORT_SYMBOL(ivtv_udma_prepare);
+EXPORT_SYMBOL(ivtv_init_on_first_open);
module_init(module_start);
module_exit(module_cleanup);
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index 8abb34a3581..3bda1df63cb 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -38,7 +38,6 @@
#include <linux/version.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/sched.h>
@@ -63,77 +62,20 @@
#include <media/tuner.h>
#include <media/cx2341x.h>
-/* #define HAVE_XC3028 1 */
+#include <linux/ivtv.h>
-#include <media/ivtv.h>
+/* Memory layout */
#define IVTV_ENCODER_OFFSET 0x00000000
-#define IVTV_ENCODER_SIZE 0x00800000 /* Last half isn't needed 0x01000000 */
-
+#define IVTV_ENCODER_SIZE 0x00800000 /* Total size is 0x01000000, but only first half is used */
#define IVTV_DECODER_OFFSET 0x01000000
-#define IVTV_DECODER_SIZE 0x00800000 /* Last half isn't needed 0x01000000 */
-
+#define IVTV_DECODER_SIZE 0x00800000 /* Total size is 0x01000000, but only first half is used */
#define IVTV_REG_OFFSET 0x02000000
#define IVTV_REG_SIZE 0x00010000
-/* Buffers on hardware offsets */
-#define IVTV_YUV_BUFFER_OFFSET 0x001a8600 /* First YUV Buffer */
-#define IVTV_YUV_BUFFER_OFFSET_1 0x00240400 /* Second YUV Buffer */
-#define IVTV_YUV_BUFFER_OFFSET_2 0x002d8200 /* Third YUV Buffer */
-#define IVTV_YUV_BUFFER_OFFSET_3 0x00370000 /* Fourth YUV Buffer */
-#define IVTV_YUV_BUFFER_UV_OFFSET 0x65400 /* Offset to UV Buffer */
-
-/* Offset to filter table in firmware */
-#define IVTV_YUV_HORIZONTAL_FILTER_OFFSET 0x025d8
-#define IVTV_YUV_VERTICAL_FILTER_OFFSET 0x03358
-
-extern const u32 yuv_offset[4];
-
-/* Maximum ivtv driver instances.
- Based on 6 PVR500s each with two PVR15s...
- TODO: make this dynamic. I believe it is only a global in order to support
- ivtv-fb. There must be a better way to do that. */
-#define IVTV_MAX_CARDS 12
-
-/* Supported cards */
-#define IVTV_CARD_PVR_250 0 /* WinTV PVR 250 */
-#define IVTV_CARD_PVR_350 1 /* encoder, decoder, tv-out */
-#define IVTV_CARD_PVR_150 2 /* WinTV PVR 150 and PVR 500 (really just two
- PVR150s on one PCI board) */
-#define IVTV_CARD_M179 3 /* AVerMedia M179 (encoder only) */
-#define IVTV_CARD_MPG600 4 /* Kuroutoshikou ITVC16-STVLP/YUAN MPG600, encoder only */
-#define IVTV_CARD_MPG160 5 /* Kuroutoshikou ITVC15-STVLP/YUAN MPG160
- cx23415 based, but does not have tv-out */
-#define IVTV_CARD_PG600 6 /* YUAN PG600/DIAMONDMM PVR-550 based on the CX Falcon 2 */
-#define IVTV_CARD_AVC2410 7 /* Adaptec AVC-2410 */
-#define IVTV_CARD_AVC2010 8 /* Adaptec AVD-2010 (No Tuner) */
-#define IVTV_CARD_TG5000TV 9 /* NAGASE TRANSGEAR 5000TV, encoder only */
-#define IVTV_CARD_VA2000MAX_SNT6 10 /* VA2000MAX-STN6 */
-#define IVTV_CARD_CX23416GYC 11 /* Kuroutoshikou CX23416GYC-STVLP (Yuan MPG600GR OEM) */
-#define IVTV_CARD_GV_MVPRX 12 /* I/O Data GV-MVP/RX, RX2, RX2W */
-#define IVTV_CARD_GV_MVPRX2E 13 /* I/O Data GV-MVP/RX2E */
-#define IVTV_CARD_GOTVIEW_PCI_DVD 14 /* GotView PCI DVD */
-#define IVTV_CARD_GOTVIEW_PCI_DVD2 15 /* GotView PCI DVD2 */
-#define IVTV_CARD_YUAN_MPC622 16 /* Yuan MPC622 miniPCI */
-#define IVTV_CARD_DCTMTVP1 17 /* DIGITAL COWBOY DCT-MTVP1 */
-#ifdef HAVE_XC3028
-#define IVTV_CARD_PG600V2 18 /* Yuan PG600V2/GotView PCI DVD Lite/Club3D ZAP-TV1x01 */
-#define IVTV_CARD_LAST 18
-#else
-#define IVTV_CARD_LAST 17
-#endif
-
-/* Variants of existing cards but with the same PCI IDs. The driver
- detects these based on other device information.
- These cards must always come last.
- New cards must be inserted above, and the indices of the cards below
- must be adjusted accordingly. */
-
-/* PVR-350 V1 (uses saa7114) */
-#define IVTV_CARD_PVR_350_V1 (IVTV_CARD_LAST+1)
-/* 2 variants of Kuroutoshikou CX23416GYC-STVLP (Yuan MPG600GR OEM) */
-#define IVTV_CARD_CX23416GYC_NOGR (IVTV_CARD_LAST+2)
-#define IVTV_CARD_CX23416GYC_NOGRYCS (IVTV_CARD_LAST+3)
+/* Maximum ivtv driver instances. Some people have a huge number of
+ capture cards, so set this to a high value. */
+#define IVTV_MAX_CARDS 32
#define IVTV_ENC_STREAM_TYPE_MPG 0
#define IVTV_ENC_STREAM_TYPE_YUV 1
@@ -146,70 +88,8 @@ extern const u32 yuv_offset[4];
#define IVTV_DEC_STREAM_TYPE_YUV 8
#define IVTV_MAX_STREAMS 9
-#define IVTV_V4L2_DEC_MPG_OFFSET 16 /* offset from 0 to register decoder mpg v4l2 minors on */
-#define IVTV_V4L2_ENC_PCM_OFFSET 24 /* offset from 0 to register pcm v4l2 minors on */
-#define IVTV_V4L2_ENC_YUV_OFFSET 32 /* offset from 0 to register yuv v4l2 minors on */
-#define IVTV_V4L2_DEC_YUV_OFFSET 48 /* offset from 0 to register decoder yuv v4l2 minors on */
-#define IVTV_V4L2_DEC_VBI_OFFSET 8 /* offset from 0 to register decoder vbi input v4l2 minors on */
-#define IVTV_V4L2_DEC_VOUT_OFFSET 16 /* offset from 0 to register vbi output v4l2 minors on */
-
-#define IVTV_ENC_MEM_START 0x00000000
-#define IVTV_DEC_MEM_START 0x01000000
-
-/* system vendor and device IDs */
-#define PCI_VENDOR_ID_ICOMP 0x4444
-#define PCI_DEVICE_ID_IVTV15 0x0803
-#define PCI_DEVICE_ID_IVTV16 0x0016
-
-/* subsystem vendor ID */
-#define IVTV_PCI_ID_HAUPPAUGE 0x0070
-#define IVTV_PCI_ID_HAUPPAUGE_ALT1 0x0270
-#define IVTV_PCI_ID_HAUPPAUGE_ALT2 0x4070
-#define IVTV_PCI_ID_ADAPTEC 0x9005
-#define IVTV_PCI_ID_AVERMEDIA 0x1461
-#define IVTV_PCI_ID_YUAN1 0x12ab
-#define IVTV_PCI_ID_YUAN2 0xff01
-#define IVTV_PCI_ID_YUAN3 0xffab
-#define IVTV_PCI_ID_YUAN4 0xfbab
-#define IVTV_PCI_ID_DIAMONDMM 0xff92
-#define IVTV_PCI_ID_IODATA 0x10fc
-#define IVTV_PCI_ID_MELCO 0x1154
-#define IVTV_PCI_ID_GOTVIEW1 0xffac
-#define IVTV_PCI_ID_GOTVIEW2 0xffad
-
-/* Decoder Buffer hardware size on Chip */
-#define IVTV_DEC_MAX_BUF 0x00100000 /* max bytes in decoder buffer */
-#define IVTV_DEC_MIN_BUF 0x00010000 /* min bytes in dec buffer */
-
-/* ======================================================================== */
-/* ========================== START USER SETTABLE DMA VARIABLES =========== */
-/* ======================================================================== */
-
#define IVTV_DMA_SG_OSD_ENT (2883584/PAGE_SIZE) /* sg entities */
-/* DMA Buffers, Default size in MB allocated */
-#define IVTV_DEFAULT_ENC_MPG_BUFFERS 4
-#define IVTV_DEFAULT_ENC_YUV_BUFFERS 2
-#define IVTV_DEFAULT_ENC_VBI_BUFFERS 1
-#define IVTV_DEFAULT_ENC_PCM_BUFFERS 1
-#define IVTV_DEFAULT_DEC_MPG_BUFFERS 1
-#define IVTV_DEFAULT_DEC_YUV_BUFFERS 1
-#define IVTV_DEFAULT_DEC_VBI_BUFFERS 1
-
-/* ======================================================================== */
-/* ========================== END USER SETTABLE DMA VARIABLES ============= */
-/* ======================================================================== */
-
-/* Decoder Status Register */
-#define IVTV_DMA_ERR_LIST 0x00000010
-#define IVTV_DMA_ERR_WRITE 0x00000008
-#define IVTV_DMA_ERR_READ 0x00000004
-#define IVTV_DMA_SUCCESS_WRITE 0x00000002
-#define IVTV_DMA_SUCCESS_READ 0x00000001
-#define IVTV_DMA_READ_ERR (IVTV_DMA_ERR_LIST | IVTV_DMA_ERR_READ)
-#define IVTV_DMA_WRITE_ERR (IVTV_DMA_ERR_LIST | IVTV_DMA_ERR_WRITE)
-#define IVTV_DMA_ERR (IVTV_DMA_ERR_LIST | IVTV_DMA_ERR_WRITE | IVTV_DMA_ERR_READ)
-
/* DMA Registers */
#define IVTV_REG_DMAXFER (0x0000)
#define IVTV_REG_DMASTATUS (0x0004)
@@ -232,44 +112,24 @@ extern const u32 yuv_offset[4];
#define IVTV_REG_VPU (0x9058)
#define IVTV_REG_APU (0xA064)
-#define IVTV_IRQ_ENC_START_CAP (0x1 << 31)
-#define IVTV_IRQ_ENC_EOS (0x1 << 30)
-#define IVTV_IRQ_ENC_VBI_CAP (0x1 << 29)
-#define IVTV_IRQ_ENC_VIM_RST (0x1 << 28)
-#define IVTV_IRQ_ENC_DMA_COMPLETE (0x1 << 27)
-#define IVTV_IRQ_ENC_PIO_COMPLETE (0x1 << 25)
-#define IVTV_IRQ_DEC_AUD_MODE_CHG (0x1 << 24)
-#define IVTV_IRQ_DEC_DATA_REQ (0x1 << 22)
-#define IVTV_IRQ_DEC_DMA_COMPLETE (0x1 << 20)
-#define IVTV_IRQ_DEC_VBI_RE_INSERT (0x1 << 19)
-#define IVTV_IRQ_DMA_ERR (0x1 << 18)
-#define IVTV_IRQ_DMA_WRITE (0x1 << 17)
-#define IVTV_IRQ_DMA_READ (0x1 << 16)
-#define IVTV_IRQ_DEC_VSYNC (0x1 << 10)
-
-/* IRQ Masks */
-#define IVTV_IRQ_MASK_INIT (IVTV_IRQ_DMA_ERR|IVTV_IRQ_ENC_DMA_COMPLETE|\
- IVTV_IRQ_DMA_READ|IVTV_IRQ_ENC_PIO_COMPLETE)
-
-#define IVTV_IRQ_MASK_CAPTURE (IVTV_IRQ_ENC_START_CAP | IVTV_IRQ_ENC_EOS)
-#define IVTV_IRQ_MASK_DECODE (IVTV_IRQ_DEC_DATA_REQ|IVTV_IRQ_DEC_AUD_MODE_CHG)
-
/* i2c stuff */
#define I2C_CLIENTS_MAX 16
/* debugging */
+extern int ivtv_debug;
-#define IVTV_DBGFLG_WARN (1 << 0)
-#define IVTV_DBGFLG_INFO (1 << 1)
-#define IVTV_DBGFLG_API (1 << 2)
-#define IVTV_DBGFLG_DMA (1 << 3)
-#define IVTV_DBGFLG_IOCTL (1 << 4)
-#define IVTV_DBGFLG_I2C (1 << 5)
-#define IVTV_DBGFLG_IRQ (1 << 6)
-#define IVTV_DBGFLG_DEC (1 << 7)
-#define IVTV_DBGFLG_YUV (1 << 8)
+#define IVTV_DBGFLG_WARN (1 << 0)
+#define IVTV_DBGFLG_INFO (1 << 1)
+#define IVTV_DBGFLG_MB (1 << 2)
+#define IVTV_DBGFLG_IOCTL (1 << 3)
+#define IVTV_DBGFLG_FILE (1 << 4)
+#define IVTV_DBGFLG_DMA (1 << 5)
+#define IVTV_DBGFLG_IRQ (1 << 6)
+#define IVTV_DBGFLG_DEC (1 << 7)
+#define IVTV_DBGFLG_YUV (1 << 8)
+#define IVTV_DBGFLG_I2C (1 << 9)
/* Flag to turn on high volume debugging */
-#define IVTV_DBGFLG_HIGHVOL (1 << 9)
+#define IVTV_DBGFLG_HIGHVOL (1 << 10)
/* NOTE: extra space before comma in 'itv->num , ## args' is required for
gcc-2.95, otherwise it won't compile. */
@@ -278,58 +138,37 @@ extern const u32 yuv_offset[4];
if ((x) & ivtv_debug) \
printk(KERN_INFO "ivtv%d " type ": " fmt, itv->num , ## args); \
} while (0)
-#define IVTV_DEBUG_WARN(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_WARN, "warning", fmt , ## args)
-#define IVTV_DEBUG_INFO(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_INFO, "info",fmt , ## args)
-#define IVTV_DEBUG_API(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_API, "api", fmt , ## args)
-#define IVTV_DEBUG_DMA(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_DMA, "dma", fmt , ## args)
+#define IVTV_DEBUG_WARN(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_WARN, "warn", fmt , ## args)
+#define IVTV_DEBUG_INFO(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_INFO, "info", fmt , ## args)
+#define IVTV_DEBUG_MB(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_MB, "mb", fmt , ## args)
+#define IVTV_DEBUG_DMA(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_DMA, "dma", fmt , ## args)
#define IVTV_DEBUG_IOCTL(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_IOCTL, "ioctl", fmt , ## args)
-#define IVTV_DEBUG_I2C(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_I2C, "i2c", fmt , ## args)
-#define IVTV_DEBUG_IRQ(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_IRQ, "irq", fmt , ## args)
-#define IVTV_DEBUG_DEC(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_DEC, "dec", fmt , ## args)
-#define IVTV_DEBUG_YUV(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_YUV, "yuv", fmt , ## args)
+#define IVTV_DEBUG_FILE(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_FILE, "file", fmt , ## args)
+#define IVTV_DEBUG_I2C(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_I2C, "i2c", fmt , ## args)
+#define IVTV_DEBUG_IRQ(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_IRQ, "irq", fmt , ## args)
+#define IVTV_DEBUG_DEC(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_DEC, "dec", fmt , ## args)
+#define IVTV_DEBUG_YUV(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_YUV, "yuv", fmt , ## args)
#define IVTV_DEBUG_HIGH_VOL(x, type, fmt, args...) \
do { \
if (((x) & ivtv_debug) && (ivtv_debug & IVTV_DBGFLG_HIGHVOL)) \
printk(KERN_INFO "ivtv%d " type ": " fmt, itv->num , ## args); \
} while (0)
-#define IVTV_DEBUG_HI_WARN(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_WARN, "warning", fmt , ## args)
-#define IVTV_DEBUG_HI_INFO(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_INFO, "info",fmt , ## args)
-#define IVTV_DEBUG_HI_API(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_API, "api", fmt , ## args)
-#define IVTV_DEBUG_HI_DMA(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_DMA, "dma", fmt , ## args)
+#define IVTV_DEBUG_HI_WARN(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_WARN, "warn", fmt , ## args)
+#define IVTV_DEBUG_HI_INFO(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_INFO, "info", fmt , ## args)
+#define IVTV_DEBUG_HI_MB(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_MB, "mb", fmt , ## args)
+#define IVTV_DEBUG_HI_DMA(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_DMA, "dma", fmt , ## args)
#define IVTV_DEBUG_HI_IOCTL(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_IOCTL, "ioctl", fmt , ## args)
-#define IVTV_DEBUG_HI_I2C(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_I2C, "i2c", fmt , ## args)
-#define IVTV_DEBUG_HI_IRQ(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_IRQ, "irq", fmt , ## args)
-#define IVTV_DEBUG_HI_DEC(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_DEC, "dec", fmt , ## args)
-#define IVTV_DEBUG_HI_YUV(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_YUV, "yuv", fmt , ## args)
-
-#define IVTV_FB_DEBUG(x, type, fmt, args...) \
- do { \
- if ((x) & ivtv_debug) \
- printk(KERN_INFO "ivtv%d-fb " type ": " fmt, itv->num , ## args); \
- } while (0)
-#define IVTV_FB_DEBUG_WARN(fmt, args...) IVTV_FB_DEBUG(IVTV_DBGFLG_WARN, "warning", fmt , ## args)
-#define IVTV_FB_DEBUG_INFO(fmt, args...) IVTV_FB_DEBUG(IVTV_DBGFLG_INFO, "info", fmt , ## args)
-#define IVTV_FB_DEBUG_API(fmt, args...) IVTV_FB_DEBUG(IVTV_DBGFLG_API, "api", fmt , ## args)
-#define IVTV_FB_DEBUG_DMA(fmt, args...) IVTV_FB_DEBUG(IVTV_DBGFLG_DMA, "dma", fmt , ## args)
-#define IVTV_FB_DEBUG_IOCTL(fmt, args...) IVTV_FB_DEBUG(IVTV_DBGFLG_IOCTL, "ioctl", fmt , ## args)
-#define IVTV_FB_DEBUG_I2C(fmt, args...) IVTV_FB_DEBUG(IVTV_DBGFLG_I2C, "i2c", fmt , ## args)
-#define IVTV_FB_DEBUG_IRQ(fmt, args...) IVTV_FB_DEBUG(IVTV_DBGFLG_IRQ, "irq", fmt , ## args)
-#define IVTV_FB_DEBUG_DEC(fmt, args...) IVTV_FB_DEBUG(IVTV_DBGFLG_DEC, "dec", fmt , ## args)
-#define IVTV_FB_DEBUG_YUV(fmt, args...) IVTV_FB_DEBUG(IVTV_DBGFLG_YUV, "yuv", fmt , ## args)
+#define IVTV_DEBUG_HI_FILE(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_FILE, "file", fmt , ## args)
+#define IVTV_DEBUG_HI_I2C(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_I2C, "i2c", fmt , ## args)
+#define IVTV_DEBUG_HI_IRQ(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_IRQ, "irq", fmt , ## args)
+#define IVTV_DEBUG_HI_DEC(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_DEC, "dec", fmt , ## args)
+#define IVTV_DEBUG_HI_YUV(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_YUV, "yuv", fmt , ## args)
/* Standard kernel messages */
#define IVTV_ERR(fmt, args...) printk(KERN_ERR "ivtv%d: " fmt, itv->num , ## args)
#define IVTV_WARN(fmt, args...) printk(KERN_WARNING "ivtv%d: " fmt, itv->num , ## args)
#define IVTV_INFO(fmt, args...) printk(KERN_INFO "ivtv%d: " fmt, itv->num , ## args)
-#define IVTV_FB_ERR(fmt, args...) printk(KERN_ERR "ivtv%d-fb: " fmt, itv->num , ## args)
-#define IVTV_FB_WARN(fmt, args...) printk(KERN_WARNING "ivtv%d-fb: " fmt, itv->num , ## args)
-#define IVTV_FB_INFO(fmt, args...) printk(KERN_INFO "ivtv%d-fb: " fmt, itv->num , ## args)
-
-/* Values for IVTV_API_DEC_PLAYBACK_SPEED mpeg_frame_type_mask parameter: */
-#define MPEG_FRAME_TYPE_IFRAME 1
-#define MPEG_FRAME_TYPE_IFRAME_PFRAME 3
-#define MPEG_FRAME_TYPE_ALL 7
/* output modes (cx23415 only) */
#define OUT_NONE 0
@@ -340,22 +179,14 @@ extern const u32 yuv_offset[4];
#define IVTV_MAX_PGM_INDEX (400)
-extern int ivtv_debug;
-
-
struct ivtv_options {
- int megabytes[IVTV_MAX_STREAMS]; /* Size in megabytes of each stream */
- int cardtype; /* force card type on load */
- int tuner; /* set tuner on load */
- int radio; /* enable/disable radio */
- int newi2c; /* New I2C algorithm */
+ int kilobytes[IVTV_MAX_STREAMS]; /* size in kilobytes of each stream */
+ int cardtype; /* force card type on load */
+ int tuner; /* set tuner on load */
+ int radio; /* enable/disable radio */
+ int newi2c; /* new I2C algorithm */
};
-#define IVTV_MBOX_DMA_START 6
-#define IVTV_MBOX_DMA_END 8
-#define IVTV_MBOX_DMA 9
-#define IVTV_MBOX_FIELD_DISPLAYED 8
-
/* ivtv-specific mailbox template */
struct ivtv_mailbox {
u32 flags;
@@ -379,7 +210,7 @@ struct ivtv_mailbox_data {
};
/* per-buffer bit flags */
-#define IVTV_F_B_NEED_BUF_SWAP 0 /* this buffer should be byte swapped */
+#define IVTV_F_B_NEED_BUF_SWAP (1 << 0) /* this buffer should be byte swapped */
/* per-stream, s_flags */
#define IVTV_F_S_DMA_PENDING 0 /* this stream has pending DMA */
@@ -400,24 +231,25 @@ struct ivtv_mailbox_data {
#define IVTV_F_I_DMA 0 /* DMA in progress */
#define IVTV_F_I_UDMA 1 /* UDMA in progress */
#define IVTV_F_I_UDMA_PENDING 2 /* UDMA pending */
-#define IVTV_F_I_SPEED_CHANGE 3 /* A speed change is in progress */
-#define IVTV_F_I_EOS 4 /* End of encoder stream reached */
-#define IVTV_F_I_RADIO_USER 5 /* The radio tuner is selected */
-#define IVTV_F_I_DIG_RST 6 /* Reset digitizer */
+#define IVTV_F_I_SPEED_CHANGE 3 /* a speed change is in progress */
+#define IVTV_F_I_EOS 4 /* end of encoder stream reached */
+#define IVTV_F_I_RADIO_USER 5 /* the radio tuner is selected */
+#define IVTV_F_I_DIG_RST 6 /* reset digitizer */
#define IVTV_F_I_DEC_YUV 7 /* YUV instead of MPG is being decoded */
-#define IVTV_F_I_ENC_VBI 8 /* VBI DMA */
#define IVTV_F_I_UPDATE_CC 9 /* CC should be updated */
#define IVTV_F_I_UPDATE_WSS 10 /* WSS should be updated */
#define IVTV_F_I_UPDATE_VPS 11 /* VPS should be updated */
#define IVTV_F_I_DECODING_YUV 12 /* this stream is YUV frame decoding */
#define IVTV_F_I_ENC_PAUSED 13 /* the encoder is paused */
#define IVTV_F_I_VALID_DEC_TIMINGS 14 /* last_dec_timing is valid */
-#define IVTV_F_I_HAVE_WORK 15 /* Used in the interrupt handler: there is work to be done */
+#define IVTV_F_I_HAVE_WORK 15 /* used in the interrupt handler: there is work to be done */
#define IVTV_F_I_WORK_HANDLER_VBI 16 /* there is work to be done for VBI */
#define IVTV_F_I_WORK_HANDLER_YUV 17 /* there is work to be done for YUV */
#define IVTV_F_I_WORK_HANDLER_PIO 18 /* there is work to be done for PIO */
#define IVTV_F_I_PIO 19 /* PIO in progress */
#define IVTV_F_I_DEC_PAUSED 20 /* the decoder is paused */
+#define IVTV_F_I_INITED 21 /* set after first open */
+#define IVTV_F_I_FAILED 22 /* set if first open failed */
/* Event notifications */
#define IVTV_F_I_EV_DEC_STOPPED 28 /* decoder stopped event */
@@ -426,7 +258,7 @@ struct ivtv_mailbox_data {
#define IVTV_F_I_EV_VSYNC_ENABLED 31 /* VSYNC event enabled */
/* Scatter-Gather array element, used in DMA transfers */
-struct ivtv_SG_element {
+struct ivtv_sg_element {
u32 src;
u32 dst;
u32 size;
@@ -436,9 +268,11 @@ struct ivtv_user_dma {
struct mutex lock;
int page_count;
struct page *map[IVTV_DMA_SG_OSD_ENT];
+ /* Needed when dealing with highmem userspace buffers */
+ struct page *bouncemap[IVTV_DMA_SG_OSD_ENT];
/* Base Dev SG Array for cx23415/6 */
- struct ivtv_SG_element SGarray[IVTV_DMA_SG_OSD_ENT];
+ struct ivtv_sg_element SGarray[IVTV_DMA_SG_OSD_ENT];
dma_addr_t SG_handle;
int SG_length;
@@ -458,21 +292,21 @@ struct ivtv_dma_page_info {
struct ivtv_buffer {
struct list_head list;
dma_addr_t dma_handle;
- unsigned long b_flags;
+ unsigned short b_flags;
+ unsigned short dma_xfer_cnt;
char *buf;
-
u32 bytesused;
u32 readpos;
};
struct ivtv_queue {
- struct list_head list;
- u32 buffers;
- u32 length;
- u32 bytesused;
+ struct list_head list; /* the list of buffers in this queue */
+ u32 buffers; /* number of buffers in this queue */
+ u32 length; /* total number of bytes of available buffer space */
+ u32 bytesused; /* total number of bytes used in this queue */
};
-struct ivtv; /* forward reference */
+struct ivtv; /* forward reference */
struct ivtv_stream {
/* These first four fields are always set, even if the stream
@@ -483,11 +317,13 @@ struct ivtv_stream {
int type; /* stream type */
u32 id;
- spinlock_t qlock; /* locks access to the queues */
- unsigned long s_flags; /* status flags, see above */
- int dma; /* can be PCI_DMA_TODEVICE,
- PCI_DMA_FROMDEVICE or
- PCI_DMA_NONE */
+ spinlock_t qlock; /* locks access to the queues */
+ unsigned long s_flags; /* status flags, see above */
+ int dma; /* can be PCI_DMA_TODEVICE, PCI_DMA_FROMDEVICE or PCI_DMA_NONE */
+ u32 pending_offset;
+ u32 pending_backup;
+ u64 pending_pts;
+
u32 dma_offset;
u32 dma_backup;
u64 dma_pts;
@@ -508,47 +344,53 @@ struct ivtv_stream {
struct ivtv_queue q_dma; /* waiting for DMA */
struct ivtv_queue q_predma; /* waiting for DMA */
+ /* DMA xfer counter, buffers belonging to the same DMA
+ xfer will have the same dma_xfer_cnt. */
+ u16 dma_xfer_cnt;
+
/* Base Dev SG Array for cx23415/6 */
- struct ivtv_SG_element *SGarray;
- struct ivtv_SG_element *PIOarray;
- dma_addr_t SG_handle;
- int SG_length;
+ struct ivtv_sg_element *sg_pending;
+ struct ivtv_sg_element *sg_processing;
+ struct ivtv_sg_element *sg_dma;
+ dma_addr_t sg_handle;
+ int sg_pending_size;
+ int sg_processing_size;
+ int sg_processed;
/* SG List of Buffers */
struct scatterlist *SGlist;
};
struct ivtv_open_id {
- u32 open_id;
- int type;
- enum v4l2_priority prio;
+ u32 open_id; /* unique ID for this file descriptor */
+ int type; /* stream type */
+ int yuv_frames; /* 1: started OUT_UDMA_YUV output mode */
+ enum v4l2_priority prio; /* priority */
struct ivtv *itv;
};
-#define IVTV_YUV_UPDATE_HORIZONTAL 0x01
-#define IVTV_YUV_UPDATE_VERTICAL 0x02
-
struct yuv_frame_info
{
u32 update;
- int src_x;
- int src_y;
- unsigned int src_w;
- unsigned int src_h;
- int dst_x;
- int dst_y;
- unsigned int dst_w;
- unsigned int dst_h;
- int pan_x;
- int pan_y;
+ s32 src_x;
+ s32 src_y;
+ u32 src_w;
+ u32 src_h;
+ s32 dst_x;
+ s32 dst_y;
+ u32 dst_w;
+ u32 dst_h;
+ s32 pan_x;
+ s32 pan_y;
u32 vis_w;
u32 vis_h;
u32 interlaced_y;
u32 interlaced_uv;
- int tru_x;
+ s32 tru_x;
u32 tru_w;
u32 tru_h;
u32 offset_y;
+ s32 lace_mode;
};
#define IVTV_YUV_MODE_INTERLACED 0x00
@@ -621,7 +463,6 @@ struct yuv_playback_info
int decode_height;
int frame_interlaced;
- int frame_interlaced_last;
int lace_mode;
int lace_threshold;
@@ -632,6 +473,11 @@ struct yuv_playback_info
u32 yuv_forced_update;
int update_frame;
+
+ int sync_field[4]; /* Field to sync on */
+ int field_delay[4]; /* Flag to extend duration of previous frame */
+ u8 fields_lapsed; /* Counter used when delaying a frame */
+
struct yuv_frame_info new_frame_info[4];
struct yuv_frame_info old_frame_info;
struct yuv_frame_info old_frame_info_args;
@@ -643,37 +489,61 @@ struct yuv_playback_info
#define IVTV_VBI_FRAMES 32
/* VBI data */
+struct vbi_cc {
+ u8 odd[2]; /* two-byte payload of odd field */
+ u8 even[2]; /* two-byte payload of even field */;
+};
+
+struct vbi_vps {
+ u8 data[5]; /* five-byte VPS payload */
+};
+
struct vbi_info {
- u32 dec_start;
- u32 enc_start, enc_size;
- int fpi;
- u32 frame;
- u32 dma_offset;
- u8 cc_data_odd[256];
- u8 cc_data_even[256];
- int cc_pos;
- u8 cc_no_update;
- u8 vps[5];
- u8 vps_found;
- int wss;
- u8 wss_found;
- u8 wss_no_update;
- u32 raw_decoder_line_size;
- u8 raw_decoder_sav_odd_field;
- u8 raw_decoder_sav_even_field;
- u32 sliced_decoder_line_size;
- u8 sliced_decoder_sav_odd_field;
- u8 sliced_decoder_sav_even_field;
- struct v4l2_format in;
- /* convenience pointer to sliced struct in vbi_in union */
- struct v4l2_sliced_vbi_format *sliced_in;
- u32 service_set_in;
- int insert_mpeg;
-
- /* Buffer for the maximum of 2 * 18 * packet_size sliced VBI lines.
- One for /dev/vbi0 and one for /dev/vbi8 */
- struct v4l2_sliced_vbi_data sliced_data[36];
- struct v4l2_sliced_vbi_data sliced_dec_data[36];
+ /* VBI general data, does not change during streaming */
+
+ u32 raw_decoder_line_size; /* raw VBI line size from digitizer */
+ u8 raw_decoder_sav_odd_field; /* raw VBI Start Active Video digitizer code of odd field */
+ u8 raw_decoder_sav_even_field; /* raw VBI Start Active Video digitizer code of even field */
+ u32 sliced_decoder_line_size; /* sliced VBI line size from digitizer */
+ u8 sliced_decoder_sav_odd_field; /* sliced VBI Start Active Video digitizer code of odd field */
+ u8 sliced_decoder_sav_even_field; /* sliced VBI Start Active Video digitizer code of even field */
+
+ u32 start[2]; /* start of first VBI line in the odd/even fields */
+ u32 count; /* number of VBI lines per field */
+ u32 raw_size; /* size of raw VBI line from the digitizer */
+ u32 sliced_size; /* size of sliced VBI line from the digitizer */
+
+ u32 dec_start; /* start in decoder memory of VBI re-insertion buffers */
+ u32 enc_start; /* start in encoder memory of VBI capture buffers */
+ u32 enc_size; /* size of VBI capture area */
+ int fpi; /* number of VBI frames per interrupt */
+
+ struct v4l2_format in; /* current VBI capture format */
+ struct v4l2_sliced_vbi_format *sliced_in; /* convenience pointer to sliced struct in vbi.in union */
+ int insert_mpeg; /* if non-zero, then embed VBI data in MPEG stream */
+
+ /* Raw VBI compatibility hack */
+
+ u32 frame; /* frame counter hack needed for backwards compatibility
+ of old VBI software */
+
+ /* Sliced VBI output data */
+
+ struct vbi_cc cc_payload[256]; /* sliced VBI CC payload array: it is an array to
+ prevent dropping CC data if they couldn't be
+ processed fast enough */
+ int cc_payload_idx; /* index in cc_payload */
+ u8 cc_missing_cnt; /* counts number of frames without CC for passthrough mode */
+ int wss_payload; /* sliced VBI WSS payload */
+ u8 wss_missing_cnt; /* counts number of frames without WSS for passthrough mode */
+ struct vbi_vps vps_payload; /* sliced VBI VPS payload */
+
+ /* Sliced VBI capture data */
+
+ struct v4l2_sliced_vbi_data sliced_data[36]; /* sliced VBI storage for VBI encoder stream */
+ struct v4l2_sliced_vbi_data sliced_dec_data[36];/* sliced VBI storage for VBI decoder stream */
+
+ /* VBI Embedding data */
/* Buffer for VBI data inserted into MPEG stream.
The first byte is a dummy byte that's never used.
@@ -690,12 +560,9 @@ struct vbi_info {
This pointer array will allocate 2049 bytes to store each VBI frame. */
u8 *sliced_mpeg_data[IVTV_VBI_FRAMES];
u32 sliced_mpeg_size[IVTV_VBI_FRAMES];
- struct ivtv_buffer sliced_mpeg_buf;
- u32 inserted_frame;
-
- u32 start[2], count;
- u32 raw_size;
- u32 sliced_size;
+ struct ivtv_buffer sliced_mpeg_buf; /* temporary buffer holding data from sliced_mpeg_data */
+ u32 inserted_frame; /* index in sliced_mpeg_size of next sliced data
+ to be inserted in the MPEG stream */
};
/* forward declaration of struct defined in ivtv-cards.h */
@@ -703,131 +570,132 @@ struct ivtv_card;
/* Struct to hold info about ivtv cards */
struct ivtv {
- int num; /* board number, -1 during init! */
- char name[8]; /* board name for printk and interrupts (e.g. 'ivtv0') */
- struct pci_dev *dev; /* PCI device */
+ /* General fixed card data */
+ int num; /* board number, -1 during init! */
+ char name[8]; /* board name for printk and interrupts (e.g. 'ivtv0') */
+ struct pci_dev *dev; /* PCI device */
const struct ivtv_card *card; /* card information */
- const char *card_name; /* full name of the card */
- u8 has_cx23415; /* 1 if it is a cx23415 based card, 0 for cx23416 */
- u8 is_50hz;
- u8 is_60hz;
- u8 is_out_50hz;
- u8 is_out_60hz;
- u8 pvr150_workaround; /* 1 if the cx25840 needs to workaround a PVR150 bug */
- u8 nof_inputs; /* number of video inputs */
- u8 nof_audio_inputs; /* number of audio inputs */
- u32 v4l2_cap; /* V4L2 capabilities of card */
- u32 hw_flags; /* Hardware description of the board */
-
- /* controlling Video decoder function */
+ const char *card_name; /* full name of the card */
+ u8 has_cx23415; /* 1 if it is a cx23415 based card, 0 for cx23416 */
+ u8 pvr150_workaround; /* 1 if the cx25840 needs to workaround a PVR150 bug */
+ u8 nof_inputs; /* number of video inputs */
+ u8 nof_audio_inputs; /* number of audio inputs */
+ u32 v4l2_cap; /* V4L2 capabilities of card */
+ u32 hw_flags; /* hardware description of the board */
+ int tunerid; /* userspace tuner ID for experimental Xceive tuner support */
+ v4l2_std_id tuner_std; /* the norm of the card's tuner (fixed) */
+ /* controlling video decoder function */
int (*video_dec_func)(struct ivtv *, unsigned int, void *);
+ u32 base_addr; /* PCI resource base address */
+ volatile void __iomem *enc_mem; /* pointer to mapped encoder memory */
+ volatile void __iomem *dec_mem; /* pointer to mapped decoder memory */
+ volatile void __iomem *reg_mem; /* pointer to mapped registers */
+ struct ivtv_options options; /* user options */
+
+
+ /* High-level state info */
+ unsigned long i_flags; /* global ivtv flags */
+ u8 is_50hz; /* 1 if the current capture standard is 50 Hz */
+ u8 is_60hz /* 1 if the current capture standard is 60 Hz */;
+ u8 is_out_50hz /* 1 if the current TV output standard is 50 Hz */;
+ u8 is_out_60hz /* 1 if the current TV output standard is 60 Hz */;
+ int output_mode; /* decoder output mode: NONE, MPG, YUV, UDMA YUV, passthrough */
+ u32 audio_input; /* current audio input */
+ u32 active_input; /* current video input */
+ u32 active_output; /* current video output */
+ v4l2_std_id std; /* current capture TV standard */
+ v4l2_std_id std_out; /* current TV output standard */
+ u8 audio_stereo_mode; /* decoder setting how to handle stereo MPEG audio */
+ u8 audio_bilingual_mode; /* decoder setting how to handle bilingual MPEG audio */
+ struct cx2341x_mpeg_params params; /* current encoder parameters */
+
+
+ /* Locking */
+ spinlock_t lock; /* lock access to this struct */
+ struct mutex serialize_lock; /* mutex used to serialize open/close/start/stop/ioctl operations */
+
+
+ /* Streams */
+ int stream_buf_size[IVTV_MAX_STREAMS]; /* stream buffer size */
+ struct ivtv_stream streams[IVTV_MAX_STREAMS]; /* stream data */
+ atomic_t capturing; /* count number of active capture streams */
+ atomic_t decoding; /* count number of active decoding streams */
+
+
+ /* Interrupts & DMA */
+ u32 irqmask; /* active interrupts */
+ u32 irq_rr_idx; /* round-robin stream index */
+ struct workqueue_struct *irq_work_queues; /* workqueue for PIO/YUV/VBI actions */
+ struct work_struct irq_work_queue; /* work entry */
+ spinlock_t dma_reg_lock; /* lock access to DMA engine registers */
+ int cur_dma_stream; /* index of current stream doing DMA (-1 if none) */
+ int cur_pio_stream; /* index of current stream doing PIO (-1 if none) */
+ u32 dma_data_req_offset; /* store offset in decoder memory of current DMA request */
+ u32 dma_data_req_size; /* store size of current DMA request */
+ int dma_retries; /* current DMA retry attempt */
+ struct ivtv_user_dma udma; /* user based DMA for OSD */
+ struct timer_list dma_timer; /* timer used to catch unfinished DMAs */
+ u32 last_vsync_field; /* last seen vsync field */
+ wait_queue_head_t dma_waitq; /* wake up when the current DMA is finished */
+ wait_queue_head_t eos_waitq; /* wake up when EOS arrives */
+ wait_queue_head_t event_waitq; /* wake up when the next decoder event arrives */
+ wait_queue_head_t vsync_waitq; /* wake up when the next decoder vsync arrives */
+
+
+ /* Mailbox */
+ struct ivtv_mailbox_data enc_mbox; /* encoder mailboxes */
+ struct ivtv_mailbox_data dec_mbox; /* decoder mailboxes */
+ struct ivtv_api_cache api_cache[256]; /* cached API commands */
+
+
+ /* I2C */
+ struct i2c_adapter i2c_adap;
+ struct i2c_algo_bit_data i2c_algo;
+ struct i2c_client i2c_client;
+ struct i2c_client *i2c_clients[I2C_CLIENTS_MAX];/* pointers to all I2C clients */
+ int i2c_state; /* i2c bit state */
+ struct mutex i2c_bus_lock; /* lock i2c bus */
+
+
+ /* Program Index information */
+ u32 pgm_info_offset; /* start of pgm info in encoder memory */
+ u32 pgm_info_num; /* number of elements in the pgm cyclic buffer in encoder memory */
+ u32 pgm_info_write_idx; /* last index written by the card that was transferred to pgm_info[] */
+ u32 pgm_info_read_idx; /* last index in pgm_info read by the application */
+ struct v4l2_enc_idx_entry pgm_info[IVTV_MAX_PGM_INDEX]; /* filled from the pgm cyclic buffer on the card */
+
+
+ /* Miscellaneous */
+ u32 open_id; /* incremented each time an open occurs, is >= 1 */
+ struct v4l2_prio_state prio; /* priority state */
+ int search_pack_header; /* 1 if ivtv_copy_buf_to_user() is scanning for a pack header (0xba) */
+ int speed; /* current playback speed setting */
+ u8 speed_mute_audio; /* 1 if audio should be muted when fast forward */
+ u64 mpg_data_received; /* number of bytes received from the MPEG stream */
+ u64 vbi_data_inserted; /* number of VBI bytes inserted into the MPEG stream */
+ u32 last_dec_timing[3]; /* cache last retrieved pts/scr/frame values */
+ unsigned long dualwatch_jiffies;/* jiffies value of the previous dualwatch check */
+ u16 dualwatch_stereo_mode; /* current detected dualwatch stereo mode */
+
+
+ /* VBI state info */
+ struct vbi_info vbi; /* VBI-specific data */
+
+
+ /* YUV playback */
+ struct yuv_playback_info yuv_info; /* YUV playback data */
- struct ivtv_options options; /* User options */
- int stream_buf_size[IVTV_MAX_STREAMS]; /* Stream buffer size */
- struct ivtv_stream streams[IVTV_MAX_STREAMS]; /* Stream data */
- int speed;
- u8 speed_mute_audio;
- unsigned long i_flags; /* global ivtv flags */
- atomic_t capturing; /* count number of active capture streams */
- atomic_t decoding; /* count number of active decoding streams */
- u32 irq_rr_idx; /* Round-robin stream index */
- int cur_dma_stream; /* index of stream doing DMA */
- int cur_pio_stream; /* index of stream doing PIO */
- u32 dma_data_req_offset;
- u32 dma_data_req_size;
- int output_mode; /* NONE, MPG, YUV, UDMA YUV, passthrough */
- spinlock_t lock; /* lock access to this struct */
- int search_pack_header;
-
- spinlock_t dma_reg_lock; /* lock access to DMA engine registers */
- struct mutex serialize_lock; /* lock used to serialize starting streams */
-
- /* User based DMA for OSD */
- struct ivtv_user_dma udma;
-
- int open_id; /* incremented each time an open occurs, used as unique ID.
- starts at 1, so 0 can be used as uninitialized value
- in the stream->id. */
-
- u32 base_addr;
- u32 irqmask;
-
- struct v4l2_prio_state prio;
- struct workqueue_struct *irq_work_queues;
- struct work_struct irq_work_queue;
- struct timer_list dma_timer; /* Timer used to catch unfinished DMAs */
-
- struct vbi_info vbi;
-
- struct ivtv_mailbox_data enc_mbox;
- struct ivtv_mailbox_data dec_mbox;
- struct ivtv_api_cache api_cache[256]; /* Cached API Commands */
-
- u8 card_rev;
- volatile void __iomem *enc_mem, *dec_mem, *reg_mem;
-
- u32 pgm_info_offset;
- u32 pgm_info_num;
- u32 pgm_info_write_idx;
- u32 pgm_info_read_idx;
- struct v4l2_enc_idx_entry pgm_info[IVTV_MAX_PGM_INDEX];
-
- u64 mpg_data_received;
- u64 vbi_data_inserted;
-
- wait_queue_head_t cap_w;
- /* when the next decoder event arrives this queue is woken up */
- wait_queue_head_t event_waitq;
- /* when the next decoder vsync arrives this queue is woken up */
- wait_queue_head_t vsync_waitq;
- /* when the current DMA is finished this queue is woken up */
- wait_queue_head_t dma_waitq;
/* OSD support */
unsigned long osd_video_pbase;
- int osd_global_alpha_state; /* 0=off : 1=on */
- int osd_local_alpha_state; /* 0=off : 1=on */
- int osd_color_key_state; /* 0=off : 1=on */
- u8 osd_global_alpha; /* Current global alpha */
- u32 osd_color_key; /* Current color key */
- u32 osd_pixelformat; /* Current pixel format */
- struct v4l2_rect osd_rect; /* Current OSD position and size */
- struct v4l2_rect main_rect; /* Current Main window position and size */
-
- u32 last_dec_timing[3]; /* Store last retrieved pts/scr/frame values */
-
- /* i2c */
- struct i2c_adapter i2c_adap;
- struct i2c_algo_bit_data i2c_algo;
- struct i2c_client i2c_client;
- struct mutex i2c_bus_lock;
- int i2c_state;
- struct i2c_client *i2c_clients[I2C_CLIENTS_MAX];
-
- /* v4l2 and User settings */
-
- /* codec settings */
- struct cx2341x_mpeg_params params;
- u32 audio_input;
- u32 active_input;
- u32 active_output;
- v4l2_std_id std;
- v4l2_std_id std_out;
- v4l2_std_id tuner_std; /* The norm of the tuner (fixed) */
- u8 audio_stereo_mode;
- u8 audio_bilingual_mode;
-
- /* dualwatch */
- unsigned long dualwatch_jiffies;
- u16 dualwatch_stereo_mode;
-
- /* Digitizer type */
- int digitizer; /* 0x00EF = saa7114 0x00FO = saa7115 0x0106 = mic */
-
- u32 lastVsyncFrame;
-
- struct yuv_playback_info yuv_info;
- struct osd_info *osd_info;
+ int osd_global_alpha_state; /* 1 = global alpha is on */
+ int osd_local_alpha_state; /* 1 = local alpha is on */
+ int osd_chroma_key_state; /* 1 = chroma-keying is on */
+ u8 osd_global_alpha; /* current global alpha */
+ u32 osd_chroma_key; /* current chroma key */
+ struct v4l2_rect osd_rect; /* current OSD position and size */
+ struct v4l2_rect main_rect; /* current Main window position and size */
+ struct osd_info *osd_info; /* ivtvfb private OSD info */
};
/* Globals */
@@ -858,6 +726,9 @@ int ivtv_waitq(wait_queue_head_t *waitq);
struct tveeprom; /* forward reference */
void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv);
+/* First-open initialization: load firmware, init cx25840, etc. */
+int ivtv_init_on_first_open(struct ivtv *itv);
+
/* This is a PCI post thing, where if the pci register is not read, then
the write doesn't always take effect right away. By reading back the
register any pending PCI writes will be performed (in order), and so
@@ -885,4 +756,4 @@ void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv);
#define write_dec_sync(val, addr) \
do { write_dec(val, addr); read_dec(addr); } while (0)
-#endif /* IVTV_DRIVER_H */
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index 66ea3cbc369..da50fa4a72a 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -27,10 +27,9 @@
#include "ivtv-irq.h"
#include "ivtv-vbi.h"
#include "ivtv-mailbox.h"
-#include "ivtv-audio.h"
+#include "ivtv-routing.h"
#include "ivtv-streams.h"
#include "ivtv-yuv.h"
-#include "ivtv-controls.h"
#include "ivtv-ioctl.h"
#include "ivtv-cards.h"
#include <media/saa7115.h>
@@ -247,8 +246,9 @@ static struct ivtv_buffer *ivtv_get_buffer(struct ivtv_stream *s, int non_block,
/* do we have new data? */
buf = ivtv_dequeue(s, &s->q_full);
if (buf) {
- if (!test_and_clear_bit(IVTV_F_B_NEED_BUF_SWAP, &buf->b_flags))
+ if ((buf->b_flags & IVTV_F_B_NEED_BUF_SWAP) == 0)
return buf;
+ buf->b_flags &= ~IVTV_F_B_NEED_BUF_SWAP;
if (s->type == IVTV_ENC_STREAM_TYPE_MPG)
/* byteswap MPG data */
ivtv_buf_swap(buf);
@@ -258,19 +258,19 @@ static struct ivtv_buffer *ivtv_get_buffer(struct ivtv_stream *s, int non_block,
}
return buf;
}
- /* return if file was opened with O_NONBLOCK */
- if (non_block) {
- *err = -EAGAIN;
- return NULL;
- }
/* return if end of stream */
if (s->type != IVTV_DEC_STREAM_TYPE_VBI && !test_bit(IVTV_F_S_STREAMING, &s->s_flags)) {
- clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
IVTV_DEBUG_INFO("EOS %s\n", s->name);
return NULL;
}
+ /* return if file was opened with O_NONBLOCK */
+ if (non_block) {
+ *err = -EAGAIN;
+ return NULL;
+ }
+
/* wait for more data to arrive */
prepare_to_wait(&s->waitq, &wait, TASK_INTERRUPTIBLE);
/* New buffers might have become available before we were added to the waitqueue */
@@ -378,10 +378,20 @@ static ssize_t ivtv_read(struct ivtv_stream *s, char __user *ubuf, size_t tot_co
int rc;
buf = ivtv_get_buffer(s, non_block, &rc);
- if (buf == NULL && rc == -EAGAIN && tot_written)
- break;
- if (buf == NULL)
+ /* if there is no data available... */
+ if (buf == NULL) {
+ /* if we got data, then return that regardless */
+ if (tot_written)
+ break;
+ /* EOS condition */
+ if (rc == 0) {
+ clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
+ clear_bit(IVTV_F_S_APPL_IO, &s->s_flags);
+ ivtv_release_stream(s);
+ }
+ /* set errno */
return rc;
+ }
rc = ivtv_copy_buf_to_user(s, buf, ubuf + tot_written, tot_count - tot_written);
if (buf != &itv->vbi.sliced_mpeg_buf) {
ivtv_enqueue(s, buf, (buf->readpos == buf->bytesused) ? &s->q_free : &s->q_io);
@@ -408,7 +418,7 @@ static ssize_t ivtv_read_pos(struct ivtv_stream *s, char __user *ubuf, size_t co
ssize_t rc = count ? ivtv_read(s, ubuf, count, non_block) : 0;
struct ivtv *itv = s->itv;
- IVTV_DEBUG_HI_INFO("read %zd from %s, got %zd\n", count, s->name, rc);
+ IVTV_DEBUG_HI_FILE("read %zd from %s, got %zd\n", count, s->name, rc);
if (rc > 0)
pos += rc;
return rc;
@@ -499,9 +509,11 @@ ssize_t ivtv_v4l2_read(struct file * filp, char __user *buf, size_t count, loff_
struct ivtv_stream *s = &itv->streams[id->type];
int rc;
- IVTV_DEBUG_HI_IOCTL("read %zd bytes from %s\n", count, s->name);
+ IVTV_DEBUG_HI_FILE("read %zd bytes from %s\n", count, s->name);
+ mutex_lock(&itv->serialize_lock);
rc = ivtv_start_capture(id);
+ mutex_unlock(&itv->serialize_lock);
if (rc)
return rc;
return ivtv_read_pos(s, buf, count, pos, filp->f_flags & O_NONBLOCK);
@@ -537,7 +549,7 @@ ssize_t ivtv_v4l2_write(struct file *filp, const char __user *user_buf, size_t c
int rc;
DEFINE_WAIT(wait);
- IVTV_DEBUG_HI_IOCTL("write %zd bytes to %s\n", count, s->name);
+ IVTV_DEBUG_HI_FILE("write %zd bytes to %s\n", count, s->name);
if (s->type != IVTV_DEC_STREAM_TYPE_MPG &&
s->type != IVTV_DEC_STREAM_TYPE_YUV &&
@@ -551,8 +563,11 @@ ssize_t ivtv_v4l2_write(struct file *filp, const char __user *user_buf, size_t c
/* This stream does not need to start any decoding */
if (s->type == IVTV_DEC_STREAM_TYPE_VOUT) {
+ int elems = count / sizeof(struct v4l2_sliced_vbi_data);
+
set_bit(IVTV_F_S_APPL_IO, &s->s_flags);
- return ivtv_write_vbi(itv, user_buf, count);
+ ivtv_write_vbi(itv, (const struct v4l2_sliced_vbi_data *)user_buf, elems);
+ return elems * sizeof(struct v4l2_sliced_vbi_data);
}
mode = s->type == IVTV_DEC_STREAM_TYPE_MPG ? OUT_MPG : OUT_YUV;
@@ -612,7 +627,9 @@ retry:
}
/* Start decoder (returns 0 if already started) */
+ mutex_lock(&itv->serialize_lock);
rc = ivtv_start_decoding(id, itv->speed);
+ mutex_unlock(&itv->serialize_lock);
if (rc) {
IVTV_DEBUG_WARN("Failed start decode stream %s\n", s->name);
@@ -645,7 +662,7 @@ retry:
to transfer the rest. */
if (count && !(filp->f_flags & O_NONBLOCK))
goto retry;
- IVTV_DEBUG_HI_INFO("Wrote %d bytes to %s (%d)\n", bytes_written, s->name, s->q_full.bytesused);
+ IVTV_DEBUG_HI_FILE("Wrote %d bytes to %s (%d)\n", bytes_written, s->name, s->q_full.bytesused);
return bytes_written;
}
@@ -657,6 +674,7 @@ unsigned int ivtv_v4l2_dec_poll(struct file *filp, poll_table *wait)
int res = 0;
/* add stream's waitq to the poll list */
+ IVTV_DEBUG_HI_FILE("Decoder poll\n");
poll_wait(filp, &s->waitq, wait);
set_bit(IVTV_F_I_EV_VSYNC_ENABLED, &itv->i_flags);
@@ -679,16 +697,21 @@ unsigned int ivtv_v4l2_enc_poll(struct file *filp, poll_table * wait)
/* Start a capture if there is none */
if (!eof && !test_bit(IVTV_F_S_STREAMING, &s->s_flags)) {
- int rc = ivtv_start_capture(id);
+ int rc;
+ mutex_lock(&itv->serialize_lock);
+ rc = ivtv_start_capture(id);
+ mutex_unlock(&itv->serialize_lock);
if (rc) {
IVTV_DEBUG_INFO("Could not start capture for %s (%d)\n",
s->name, rc);
return POLLERR;
}
+ IVTV_DEBUG_FILE("Encoder poll started capture\n");
}
/* add stream's waitq to the poll list */
+ IVTV_DEBUG_HI_FILE("Encoder poll\n");
poll_wait(filp, &s->waitq, wait);
if (eof || s->q_full.length)
@@ -701,7 +724,7 @@ void ivtv_stop_capture(struct ivtv_open_id *id, int gop_end)
struct ivtv *itv = id->itv;
struct ivtv_stream *s = &itv->streams[id->type];
- IVTV_DEBUG_IOCTL("close() of %s\n", s->name);
+ IVTV_DEBUG_FILE("close() of %s\n", s->name);
/* 'Unclaim' this stream */
@@ -728,10 +751,11 @@ void ivtv_stop_capture(struct ivtv_open_id *id, int gop_end)
ivtv_stop_v4l2_encode_stream(s, gop_end);
}
}
- clear_bit(IVTV_F_S_APPL_IO, &s->s_flags);
- clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
-
- ivtv_release_stream(s);
+ if (!gop_end) {
+ clear_bit(IVTV_F_S_APPL_IO, &s->s_flags);
+ clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
+ ivtv_release_stream(s);
+ }
}
static void ivtv_stop_decoding(struct ivtv_open_id *id, int flags, u64 pts)
@@ -739,13 +763,14 @@ static void ivtv_stop_decoding(struct ivtv_open_id *id, int flags, u64 pts)
struct ivtv *itv = id->itv;
struct ivtv_stream *s = &itv->streams[id->type];
- IVTV_DEBUG_IOCTL("close() of %s\n", s->name);
+ IVTV_DEBUG_FILE("close() of %s\n", s->name);
/* Stop decoding */
if (test_bit(IVTV_F_S_STREAMING, &s->s_flags)) {
IVTV_DEBUG_INFO("close stopping decode\n");
ivtv_stop_v4l2_decode_stream(s, flags, pts);
+ itv->output_mode = OUT_NONE;
}
clear_bit(IVTV_F_S_APPL_IO, &s->s_flags);
clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
@@ -753,11 +778,7 @@ static void ivtv_stop_decoding(struct ivtv_open_id *id, int flags, u64 pts)
/* Restore registers we've changed & clean up any mess we've made */
ivtv_yuv_close(itv);
}
- if (s->type == IVTV_DEC_STREAM_TYPE_YUV && itv->output_mode == OUT_YUV)
- itv->output_mode = OUT_NONE;
- else if (s->type == IVTV_DEC_STREAM_TYPE_YUV && itv->output_mode == OUT_UDMA_YUV)
- itv->output_mode = OUT_NONE;
- else if (s->type == IVTV_DEC_STREAM_TYPE_MPG && itv->output_mode == OUT_MPG)
+ if (itv->output_mode == OUT_UDMA_YUV && id->yuv_frames)
itv->output_mode = OUT_NONE;
itv->speed = 0;
@@ -771,7 +792,7 @@ int ivtv_v4l2_close(struct inode *inode, struct file *filp)
struct ivtv *itv = id->itv;
struct ivtv_stream *s = &itv->streams[id->type];
- IVTV_DEBUG_IOCTL("close() of %s\n", s->name);
+ IVTV_DEBUG_FILE("close %s\n", s->name);
v4l2_prio_close(&itv->prio, &id->prio);
@@ -784,6 +805,7 @@ int ivtv_v4l2_close(struct inode *inode, struct file *filp)
/* 'Unclaim' this stream */
/* Stop radio */
+ mutex_lock(&itv->serialize_lock);
if (id->type == IVTV_ENC_STREAM_TYPE_RAD) {
/* Closing radio device, return to TV mode */
ivtv_mute(itv);
@@ -809,56 +831,35 @@ int ivtv_v4l2_close(struct inode *inode, struct file *filp)
ivtv_stop_decoding(id, VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY, 0);
/* If all output streams are closed, and if the user doesn't have
- IVTV_DEC_STREAM_TYPE_VOUT open, then disable VBI on TV-out. */
+ IVTV_DEC_STREAM_TYPE_VOUT open, then disable CC on TV-out. */
if (itv->output_mode == OUT_NONE && !test_bit(IVTV_F_S_APPL_IO, &s_vout->s_flags)) {
- /* disable VBI on TV-out */
- ivtv_disable_vbi(itv);
+ /* disable CC on TV-out */
+ ivtv_disable_cc(itv);
}
} else {
ivtv_stop_capture(id, 0);
}
kfree(id);
+ mutex_unlock(&itv->serialize_lock);
return 0;
}
-int ivtv_v4l2_open(struct inode *inode, struct file *filp)
+static int ivtv_serialized_open(struct ivtv_stream *s, struct file *filp)
{
- int x, y = 0;
+ struct ivtv *itv = s->itv;
struct ivtv_open_id *item;
- struct ivtv *itv = NULL;
- struct ivtv_stream *s = NULL;
- int minor = iminor(inode);
-
- /* Find which card this open was on */
- spin_lock(&ivtv_cards_lock);
- for (x = 0; itv == NULL && x < ivtv_cards_active; x++) {
- /* find out which stream this open was on */
- for (y = 0; y < IVTV_MAX_STREAMS; y++) {
- s = &ivtv_cards[x]->streams[y];
- if (s->v4l2dev && s->v4l2dev->minor == minor) {
- itv = ivtv_cards[x];
- break;
- }
- }
- }
- spin_unlock(&ivtv_cards_lock);
- if (itv == NULL) {
- /* Couldn't find a device registered
- on that minor, shouldn't happen! */
- printk(KERN_WARNING "ivtv: No ivtv device found on minor %d\n", minor);
- return -ENXIO;
- }
+ IVTV_DEBUG_FILE("open %s\n", s->name);
- if (y == IVTV_DEC_STREAM_TYPE_MPG &&
+ if (s->type == IVTV_DEC_STREAM_TYPE_MPG &&
test_bit(IVTV_F_S_CLAIMED, &itv->streams[IVTV_DEC_STREAM_TYPE_YUV].s_flags))
return -EBUSY;
- if (y == IVTV_DEC_STREAM_TYPE_YUV &&
+ if (s->type == IVTV_DEC_STREAM_TYPE_YUV &&
test_bit(IVTV_F_S_CLAIMED, &itv->streams[IVTV_DEC_STREAM_TYPE_MPG].s_flags))
return -EBUSY;
- if (y == IVTV_DEC_STREAM_TYPE_YUV) {
+ if (s->type == IVTV_DEC_STREAM_TYPE_YUV) {
if (read_reg(0x82c) == 0) {
IVTV_ERR("Tried to open YUV output device but need to send data to mpeg decoder before it can be used\n");
/* return -ENODEV; */
@@ -873,7 +874,7 @@ int ivtv_v4l2_open(struct inode *inode, struct file *filp)
return -ENOMEM;
}
item->itv = itv;
- item->type = y;
+ item->type = s->type;
v4l2_prio_open(&itv->prio, &item->prio);
item->open_id = itv->open_id++;
@@ -887,12 +888,20 @@ int ivtv_v4l2_open(struct inode *inode, struct file *filp)
return -EBUSY;
}
+ if (!test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags)) {
+ if (atomic_read(&itv->capturing) > 0) {
+ /* switching to radio while capture is
+ in progress is not polite */
+ kfree(item);
+ return -EBUSY;
+ }
+ }
+ /* Mark that the radio is being used. */
+ set_bit(IVTV_F_I_RADIO_USER, &itv->i_flags);
/* We have the radio */
ivtv_mute(itv);
/* Switch tuner to radio */
ivtv_call_i2c_clients(itv, AUDC_SET_RADIO, NULL);
- /* Mark that the radio is being used. */
- set_bit(IVTV_F_I_RADIO_USER, &itv->i_flags);
/* Select the correct audio input (i.e. radio tuner) */
ivtv_audio_set_io(itv);
if (itv->hw_flags & IVTV_HW_SAA711X)
@@ -907,45 +916,65 @@ int ivtv_v4l2_open(struct inode *inode, struct file *filp)
}
/* YUV or MPG Decoding Mode? */
- if (y == IVTV_DEC_STREAM_TYPE_MPG)
+ if (s->type == IVTV_DEC_STREAM_TYPE_MPG)
clear_bit(IVTV_F_I_DEC_YUV, &itv->i_flags);
- else if (y == IVTV_DEC_STREAM_TYPE_YUV)
- {
+ else if (s->type == IVTV_DEC_STREAM_TYPE_YUV)
set_bit(IVTV_F_I_DEC_YUV, &itv->i_flags);
- }
-
return 0;
}
-void ivtv_mute(struct ivtv *itv)
+int ivtv_v4l2_open(struct inode *inode, struct file *filp)
{
- struct v4l2_control ctrl = { V4L2_CID_AUDIO_MUTE, 1 };
+ int res, x, y = 0;
+ struct ivtv *itv = NULL;
+ struct ivtv_stream *s = NULL;
+ int minor = iminor(inode);
+
+ /* Find which card this open was on */
+ spin_lock(&ivtv_cards_lock);
+ for (x = 0; itv == NULL && x < ivtv_cards_active; x++) {
+ /* find out which stream this open was on */
+ for (y = 0; y < IVTV_MAX_STREAMS; y++) {
+ s = &ivtv_cards[x]->streams[y];
+ if (s->v4l2dev && s->v4l2dev->minor == minor) {
+ itv = ivtv_cards[x];
+ break;
+ }
+ }
+ }
+ spin_unlock(&ivtv_cards_lock);
+
+ if (itv == NULL) {
+ /* Couldn't find a device registered
+ on that minor, shouldn't happen! */
+ IVTV_WARN("No ivtv device found on minor %d\n", minor);
+ return -ENXIO;
+ }
- /* Mute sound to avoid pop */
- ivtv_control_ioctls(itv, VIDIOC_S_CTRL, &ctrl);
+ mutex_lock(&itv->serialize_lock);
+ if (ivtv_init_on_first_open(itv)) {
+ IVTV_ERR("Failed to initialize on minor %d\n", minor);
+ mutex_unlock(&itv->serialize_lock);
+ return -ENXIO;
+ }
+ res = ivtv_serialized_open(s, filp);
+ mutex_unlock(&itv->serialize_lock);
+ return res;
+}
+void ivtv_mute(struct ivtv *itv)
+{
if (atomic_read(&itv->capturing))
ivtv_vapi(itv, CX2341X_ENC_MUTE_AUDIO, 1, 1);
-
IVTV_DEBUG_INFO("Mute\n");
}
void ivtv_unmute(struct ivtv *itv)
{
- struct v4l2_control ctrl = { V4L2_CID_AUDIO_MUTE, 0 };
-
- /* initialize or refresh input */
- if (atomic_read(&itv->capturing) == 0)
- ivtv_vapi(itv, CX2341X_ENC_INITIALIZE_INPUT, 0);
-
- ivtv_msleep_timeout(100, 0);
-
if (atomic_read(&itv->capturing)) {
+ ivtv_msleep_timeout(100, 0);
ivtv_vapi(itv, CX2341X_ENC_MISC, 1, 12);
ivtv_vapi(itv, CX2341X_ENC_MUTE_AUDIO, 1, 0);
}
-
- /* Unmute */
- ivtv_control_ioctls(itv, VIDIOC_S_CTRL, &ctrl);
IVTV_DEBUG_INFO("Unmute\n");
}
diff --git a/drivers/media/video/ivtv/ivtv-fileops.h b/drivers/media/video/ivtv/ivtv-fileops.h
index 74a1745fabb..2c8d5186c9c 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.h
+++ b/drivers/media/video/ivtv/ivtv-fileops.h
@@ -18,6 +18,9 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_FILEOPS_H
+#define IVTV_FILEOPS_H
+
/* Testing/Debugging */
int ivtv_v4l2_open(struct inode *inode, struct file *filp);
ssize_t ivtv_v4l2_read(struct file *filp, char __user *buf, size_t count,
@@ -42,3 +45,5 @@ int ivtv_claim_stream(struct ivtv_open_id *id, int type);
/* Release a previously claimed stream. */
void ivtv_release_stream(struct ivtv_stream *s);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-firmware.h b/drivers/media/video/ivtv/ivtv-firmware.h
index 8b2ffe65890..041ba94e65b 100644
--- a/drivers/media/video/ivtv/ivtv-firmware.h
+++ b/drivers/media/video/ivtv/ivtv-firmware.h
@@ -19,7 +19,12 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_FIRMWARE_H
+#define IVTV_FIRMWARE_H
+
int ivtv_firmware_init(struct ivtv *itv);
void ivtv_firmware_versions(struct ivtv *itv);
void ivtv_halt_firmware(struct ivtv *itv);
void ivtv_init_mpeg_decoder(struct ivtv *itv);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/video/ivtv/ivtv-gpio.c
index 6a5a7aa6697..132fb5f7136 100644
--- a/drivers/media/video/ivtv/ivtv-gpio.c
+++ b/drivers/media/video/ivtv/ivtv-gpio.c
@@ -122,30 +122,6 @@ void ivtv_reset_ir_gpio(struct ivtv *itv)
write_reg(curdir, IVTV_REG_GPIO_DIR);
}
-#ifdef HAVE_XC3028
-int ivtv_reset_tuner_gpio(enum v4l2_tuner_type mode, void *priv, int ptr)
-{
- int curdir, curout;
- struct ivtv *itv = (struct ivtv *) priv;
-
- if (itv->card->type != IVTV_CARD_PG600V2 || itv->options.tuner != TUNER_XCEIVE_XC3028)
- return -EINVAL;
- IVTV_INFO("Resetting tuner\n");
- curout = read_reg(IVTV_REG_GPIO_OUT);
- curdir = read_reg(IVTV_REG_GPIO_DIR);
- curdir |= (1 << 12); /* GPIO bit 12 */
-
- curout &= ~(1 << 12);
- write_reg(curout, IVTV_REG_GPIO_OUT);
- schedule_timeout_interruptible(msecs_to_jiffies(1));
-
- curout |= (1 << 12);
- write_reg(curout, IVTV_REG_GPIO_OUT);
- schedule_timeout_interruptible(msecs_to_jiffies(1));
-
- return 0;
-}
-#endif
void ivtv_gpio_init(struct ivtv *itv)
{
diff --git a/drivers/media/video/ivtv/ivtv-gpio.h b/drivers/media/video/ivtv/ivtv-gpio.h
index c301d2a3934..964a265d91a 100644
--- a/drivers/media/video/ivtv/ivtv-gpio.h
+++ b/drivers/media/video/ivtv/ivtv-gpio.h
@@ -18,8 +18,13 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_GPIO_H
+#define IVTV_GPIO_H
+
/* GPIO stuff */
void ivtv_gpio_init(struct ivtv *itv);
void ivtv_reset_ir_gpio(struct ivtv *itv);
-int ivtv_reset_tuner_gpio(enum v4l2_tuner_type mode, void *priv, int ptr);
+int ivtv_reset_tuner_gpio(void *dev, int cmd, int value);
int ivtv_gpio(struct ivtv *itv, unsigned int command, void *arg);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index b3557435456..285fca676a6 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -109,6 +109,7 @@ static const u8 hw_driverids[] = {
I2C_DRIVERID_UPD64083,
I2C_DRIVERID_SAA717X,
I2C_DRIVERID_WM8739,
+ I2C_DRIVERID_VP27SMPX,
0 /* IVTV_HW_GPIO dummy driver ID */
};
@@ -128,6 +129,7 @@ static const char * const hw_drivernames[] = {
"upd64083",
"saa717x",
"wm8739",
+ "vp27smpx",
"gpio",
};
@@ -534,14 +536,13 @@ static struct i2c_adapter ivtv_i2c_adap_template = {
#endif
};
-static struct i2c_algo_bit_data ivtv_i2c_algo_template = {
- NULL, /* ?? */
- ivtv_setsda_old, /* setsda function */
- ivtv_setscl_old, /* " */
- ivtv_getsda_old, /* " */
- ivtv_getscl_old, /* " */
- 10, /* udelay */
- 200 /* timeout */
+static const struct i2c_algo_bit_data ivtv_i2c_algo_template = {
+ .setsda = ivtv_setsda_old,
+ .setscl = ivtv_setscl_old,
+ .getsda = ivtv_getsda_old,
+ .getscl = ivtv_getscl_old,
+ .udelay = 5,
+ .timeout = 200,
};
static struct i2c_client ivtv_i2c_client_template = {
diff --git a/drivers/media/video/ivtv/ivtv-i2c.h b/drivers/media/video/ivtv/ivtv-i2c.h
index 5d210adb5c5..677c3292855 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.h
+++ b/drivers/media/video/ivtv/ivtv-i2c.h
@@ -18,6 +18,9 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_I2C_H
+#define IVTV_I2C_H
+
int ivtv_cx25840(struct ivtv *itv, unsigned int cmd, void *arg);
int ivtv_saa7115(struct ivtv *itv, unsigned int cmd, void *arg);
int ivtv_saa7127(struct ivtv *itv, unsigned int cmd, void *arg);
@@ -34,3 +37,5 @@ void ivtv_call_i2c_clients(struct ivtv *itv, unsigned int cmd, void *arg);
/* init + register i2c algo-bit adapter */
int __devinit init_ivtv_i2c(struct ivtv *itv);
void __devexit exit_ivtv_i2c(struct ivtv *itv);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index dfe0aedc60f..206eee7542d 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -25,8 +25,7 @@
#include "ivtv-queue.h"
#include "ivtv-fileops.h"
#include "ivtv-vbi.h"
-#include "ivtv-audio.h"
-#include "ivtv-video.h"
+#include "ivtv-routing.h"
#include "ivtv-streams.h"
#include "ivtv-yuv.h"
#include "ivtv-ioctl.h"
@@ -164,7 +163,7 @@ void ivtv_set_osd_alpha(struct ivtv *itv)
{
ivtv_vapi(itv, CX2341X_OSD_SET_GLOBAL_ALPHA, 3,
itv->osd_global_alpha_state, itv->osd_global_alpha, !itv->osd_local_alpha_state);
- ivtv_vapi(itv, CX2341X_OSD_SET_CHROMA_KEY, 2, itv->osd_color_key_state, itv->osd_color_key);
+ ivtv_vapi(itv, CX2341X_OSD_SET_CHROMA_KEY, 2, itv->osd_chroma_key_state, itv->osd_chroma_key);
}
int ivtv_set_speed(struct ivtv *itv, int speed)
@@ -427,7 +426,7 @@ static int ivtv_get_fmt(struct ivtv *itv, int streamtype, struct v4l2_format *fm
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT))
return -EINVAL;
- fmt->fmt.win.chromakey = itv->osd_color_key;
+ fmt->fmt.win.chromakey = itv->osd_chroma_key;
fmt->fmt.win.global_alpha = itv->osd_global_alpha;
break;
@@ -547,7 +546,7 @@ static int ivtv_try_or_set_fmt(struct ivtv *itv, int streamtype,
if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT))
return -EINVAL;
if (set_fmt) {
- itv->osd_color_key = fmt->fmt.win.chromakey;
+ itv->osd_chroma_key = fmt->fmt.win.chromakey;
itv->osd_global_alpha = fmt->fmt.win.global_alpha;
ivtv_set_osd_alpha(itv);
}
@@ -584,9 +583,7 @@ static int ivtv_try_or_set_fmt(struct ivtv *itv, int streamtype,
/* set raw VBI format */
if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
- if (set_fmt && streamtype == IVTV_ENC_STREAM_TYPE_VBI &&
- itv->vbi.sliced_in->service_set &&
- atomic_read(&itv->capturing) > 0) {
+ if (set_fmt && atomic_read(&itv->capturing) > 0) {
return -EBUSY;
}
if (set_fmt) {
@@ -624,7 +621,7 @@ static int ivtv_try_or_set_fmt(struct ivtv *itv, int streamtype,
return 0;
if (set == 0)
return -EINVAL;
- if (atomic_read(&itv->capturing) > 0 && itv->vbi.sliced_in->service_set == 0) {
+ if (atomic_read(&itv->capturing) > 0) {
return -EBUSY;
}
itv->video_dec_func(itv, VIDIOC_S_FMT, fmt);
@@ -677,13 +674,21 @@ static int ivtv_debug_ioctls(struct file *filp, unsigned int cmd, void *arg)
case VIDIOC_INT_S_AUDIO_ROUTING: {
struct v4l2_routing *route = arg;
- ivtv_audio_set_route(itv, route);
+ ivtv_i2c_hw(itv, itv->card->hw_audio, VIDIOC_INT_S_AUDIO_ROUTING, route);
break;
}
- case VIDIOC_INT_RESET:
- ivtv_reset_ir_gpio(itv);
+ case VIDIOC_INT_RESET: {
+ u32 val = *(u32 *)arg;
+
+ if ((val == 0 && itv->options.newi2c) || (val & 0x01)) {
+ ivtv_reset_ir_gpio(itv);
+ }
+ if (val & 0x02) {
+ itv->video_dec_func(itv, cmd, 0);
+ }
break;
+ }
default:
return -EINVAL;
@@ -694,6 +699,7 @@ static int ivtv_debug_ioctls(struct file *filp, unsigned int cmd, void *arg)
int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void *arg)
{
struct ivtv_open_id *id = NULL;
+ u32 data[CX2341X_MBOX_MAX_DATA];
if (filp) id = (struct ivtv_open_id *)filp->private_data;
@@ -898,6 +904,9 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void
IVTV_DEBUG_INFO("Input unchanged\n");
break;
}
+ if (atomic_read(&itv->capturing) > 0) {
+ return -EBUSY;
+ }
IVTV_DEBUG_INFO("Changing input from %d to %d\n",
itv->active_input, inp);
@@ -1127,12 +1136,14 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void
memset(&enc->raw, 0, sizeof(enc->raw));
switch (enc->cmd) {
case V4L2_ENC_CMD_START:
+ IVTV_DEBUG_IOCTL("V4L2_ENC_CMD_START\n");
enc->flags = 0;
if (try)
return 0;
return ivtv_start_capture(id);
case V4L2_ENC_CMD_STOP:
+ IVTV_DEBUG_IOCTL("V4L2_ENC_CMD_STOP\n");
enc->flags &= V4L2_ENC_CMD_STOP_AT_GOP_END;
if (try)
return 0;
@@ -1140,6 +1151,7 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void
return 0;
case V4L2_ENC_CMD_PAUSE:
+ IVTV_DEBUG_IOCTL("V4L2_ENC_CMD_PAUSE\n");
enc->flags = 0;
if (try)
return 0;
@@ -1152,6 +1164,7 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void
break;
case V4L2_ENC_CMD_RESUME:
+ IVTV_DEBUG_IOCTL("V4L2_ENC_CMD_RESUME\n");
enc->flags = 0;
if (try)
return 0;
@@ -1163,6 +1176,7 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void
ivtv_unmute(itv);
break;
default:
+ IVTV_DEBUG_IOCTL("Unknown cmd %d\n", enc->cmd);
return -EINVAL;
}
break;
@@ -1170,22 +1184,58 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void
case VIDIOC_G_FBUF: {
struct v4l2_framebuffer *fb = arg;
+ int pixfmt;
+ static u32 pixel_format[16] = {
+ V4L2_PIX_FMT_PAL8, /* Uses a 256-entry RGB colormap */
+ V4L2_PIX_FMT_RGB565,
+ V4L2_PIX_FMT_RGB555,
+ V4L2_PIX_FMT_RGB444,
+ V4L2_PIX_FMT_RGB32,
+ 0,
+ 0,
+ 0,
+ V4L2_PIX_FMT_PAL8, /* Uses a 256-entry YUV colormap */
+ V4L2_PIX_FMT_YUV565,
+ V4L2_PIX_FMT_YUV555,
+ V4L2_PIX_FMT_YUV444,
+ V4L2_PIX_FMT_YUV32,
+ 0,
+ 0,
+ 0,
+ };
memset(fb, 0, sizeof(*fb));
if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
return -EINVAL;
fb->capability = V4L2_FBUF_CAP_EXTERNOVERLAY | V4L2_FBUF_CAP_CHROMAKEY |
- V4L2_FBUF_CAP_LOCAL_ALPHA | V4L2_FBUF_CAP_GLOBAL_ALPHA;
- fb->fmt.pixelformat = itv->osd_pixelformat;
+ V4L2_FBUF_CAP_GLOBAL_ALPHA;
+ ivtv_vapi_result(itv, data, CX2341X_OSD_GET_STATE, 0);
+ data[0] |= (read_reg(0x2a00) >> 7) & 0x40;
+ pixfmt = (data[0] >> 3) & 0xf;
+ fb->fmt.pixelformat = pixel_format[pixfmt];
fb->fmt.width = itv->osd_rect.width;
fb->fmt.height = itv->osd_rect.height;
fb->base = (void *)itv->osd_video_pbase;
+ if (itv->osd_chroma_key_state)
+ fb->flags |= V4L2_FBUF_FLAG_CHROMAKEY;
if (itv->osd_global_alpha_state)
fb->flags |= V4L2_FBUF_FLAG_GLOBAL_ALPHA;
- if (itv->osd_local_alpha_state)
- fb->flags |= V4L2_FBUF_FLAG_LOCAL_ALPHA;
- if (itv->osd_color_key_state)
- fb->flags |= V4L2_FBUF_FLAG_CHROMAKEY;
+ pixfmt &= 7;
+ /* no local alpha for RGB565 or unknown formats */
+ if (pixfmt == 1 || pixfmt > 4)
+ break;
+ /* 16-bit formats have inverted local alpha */
+ if (pixfmt == 2 || pixfmt == 3)
+ fb->capability |= V4L2_FBUF_CAP_LOCAL_INV_ALPHA;
+ else
+ fb->capability |= V4L2_FBUF_CAP_LOCAL_ALPHA;
+ if (itv->osd_local_alpha_state) {
+ /* 16-bit formats have inverted local alpha */
+ if (pixfmt == 2 || pixfmt == 3)
+ fb->flags |= V4L2_FBUF_FLAG_LOCAL_INV_ALPHA;
+ else
+ fb->flags |= V4L2_FBUF_FLAG_LOCAL_ALPHA;
+ }
break;
}
@@ -1195,12 +1245,22 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void
if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
return -EINVAL;
itv->osd_global_alpha_state = (fb->flags & V4L2_FBUF_FLAG_GLOBAL_ALPHA) != 0;
- itv->osd_local_alpha_state = (fb->flags & V4L2_FBUF_FLAG_LOCAL_ALPHA) != 0;
- itv->osd_color_key_state = (fb->flags & V4L2_FBUF_FLAG_CHROMAKEY) != 0;
+ itv->osd_local_alpha_state =
+ (fb->flags & (V4L2_FBUF_FLAG_LOCAL_ALPHA|V4L2_FBUF_FLAG_LOCAL_INV_ALPHA)) != 0;
+ itv->osd_chroma_key_state = (fb->flags & V4L2_FBUF_FLAG_CHROMAKEY) != 0;
ivtv_set_osd_alpha(itv);
break;
}
+ case VIDIOC_OVERLAY: {
+ int *on = arg;
+
+ if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
+ return -EINVAL;
+ ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, *on != 0);
+ break;
+ }
+
case VIDIOC_LOG_STATUS:
{
int has_output = itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT;
@@ -1209,6 +1269,7 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void
int i;
IVTV_INFO("================= START STATUS CARD #%d =================\n", itv->num);
+ IVTV_INFO("Version: %s Card: %s\n", IVTV_VERSION, itv->card_name);
if (itv->hw_flags & IVTV_HW_TVEEPROM) {
struct tveeprom tv;
@@ -1217,32 +1278,72 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void
ivtv_call_i2c_clients(itv, VIDIOC_LOG_STATUS, NULL);
ivtv_get_input(itv, itv->active_input, &vidin);
ivtv_get_audio_input(itv, itv->audio_input, &audin);
- IVTV_INFO("Video Input: %s\n", vidin.name);
- IVTV_INFO("Audio Input: %s\n", audin.name);
+ IVTV_INFO("Video Input: %s\n", vidin.name);
+ IVTV_INFO("Audio Input: %s%s\n", audin.name,
+ (itv->dualwatch_stereo_mode & ~0x300) == 0x200 ? " (Bilingual)" : "");
if (has_output) {
struct v4l2_output vidout;
struct v4l2_audioout audout;
int mode = itv->output_mode;
- static const char * const output_modes[] = {
+ static const char * const output_modes[5] = {
"None",
"MPEG Streaming",
"YUV Streaming",
"YUV Frames",
"Passthrough",
};
+ static const char * const audio_modes[5] = {
+ "Stereo",
+ "Left",
+ "Right",
+ "Mono",
+ "Swapped"
+ };
+ static const char * const alpha_mode[4] = {
+ "None",
+ "Global",
+ "Local",
+ "Global and Local"
+ };
+ static const char * const pixel_format[16] = {
+ "ARGB Indexed",
+ "RGB 5:6:5",
+ "ARGB 1:5:5:5",
+ "ARGB 1:4:4:4",
+ "ARGB 8:8:8:8",
+ "5",
+ "6",
+ "7",
+ "AYUV Indexed",
+ "YUV 5:6:5",
+ "AYUV 1:5:5:5",
+ "AYUV 1:4:4:4",
+ "AYUV 8:8:8:8",
+ "13",
+ "14",
+ "15",
+ };
ivtv_get_output(itv, itv->active_output, &vidout);
ivtv_get_audio_output(itv, 0, &audout);
IVTV_INFO("Video Output: %s\n", vidout.name);
- IVTV_INFO("Audio Output: %s\n", audout.name);
+ IVTV_INFO("Audio Output: %s (Stereo/Bilingual: %s/%s)\n", audout.name,
+ audio_modes[itv->audio_stereo_mode],
+ audio_modes[itv->audio_bilingual_mode]);
if (mode < 0 || mode > OUT_PASSTHROUGH)
mode = OUT_NONE;
- IVTV_INFO("Output Mode: %s\n", output_modes[mode]);
+ IVTV_INFO("Output Mode: %s\n", output_modes[mode]);
+ ivtv_vapi_result(itv, data, CX2341X_OSD_GET_STATE, 0);
+ data[0] |= (read_reg(0x2a00) >> 7) & 0x40;
+ IVTV_INFO("Overlay: %s, Alpha: %s, Pixel Format: %s\n",
+ data[0] & 1 ? "On" : "Off",
+ alpha_mode[(data[0] >> 1) & 0x3],
+ pixel_format[(data[0] >> 3) & 0xf]);
}
- IVTV_INFO("Tuner: %s\n",
+ IVTV_INFO("Tuner: %s\n",
test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags) ? "Radio" : "TV");
cx2341x_log_status(&itv->params, itv->name);
- IVTV_INFO("Version: %s Status flags: 0x%08lx\n", IVTV_VERSION, itv->i_flags);
+ IVTV_INFO("Status flags: 0x%08lx\n", itv->i_flags);
for (i = 0; i < IVTV_MAX_STREAMS; i++) {
struct ivtv_stream *s = &itv->streams[i];
@@ -1252,7 +1353,7 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void
(s->buffers - s->q_free.buffers) * 100 / s->buffers,
(s->buffers * s->buf_size) / 1024, s->buffers);
}
- IVTV_INFO("Read MPEG/VBI: %lld/%lld bytes\n", (long long)itv->mpg_data_received, (long long)itv->vbi_data_inserted);
+ IVTV_INFO("Read MPG/VBI: %lld/%lld bytes\n", (long long)itv->mpg_data_received, (long long)itv->vbi_data_inserted);
IVTV_INFO("================== END STATUS CARD #%d ==================\n", itv->num);
break;
}
@@ -1288,6 +1389,8 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg)
ivtv_release_stream(s);
return -EBUSY;
}
+ /* Mark that this file handle started the UDMA_YUV mode */
+ id->yuv_frames = 1;
if (args->y_source == NULL)
return 0;
return ivtv_yuv_prep_frame(itv, args);
@@ -1396,9 +1499,9 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg)
int try = (cmd == VIDEO_TRY_COMMAND);
if (try)
- IVTV_DEBUG_IOCTL("VIDEO_TRY_COMMAND\n");
+ IVTV_DEBUG_IOCTL("VIDEO_TRY_COMMAND %d\n", vc->cmd);
else
- IVTV_DEBUG_IOCTL("VIDEO_COMMAND\n");
+ IVTV_DEBUG_IOCTL("VIDEO_COMMAND %d\n", vc->cmd);
return ivtv_video_command(itv, id, vc, try);
}
@@ -1429,11 +1532,15 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg)
return 0;
if (nonblocking)
return -EAGAIN;
- /* wait for event */
+ /* Wait for event. Note that serialize_lock is locked,
+ so to allow other processes to access the driver while
+ we are waiting unlock first and later lock again. */
+ mutex_unlock(&itv->serialize_lock);
prepare_to_wait(&itv->event_waitq, &wait, TASK_INTERRUPTIBLE);
if ((itv->i_flags & (IVTV_F_I_EV_DEC_STOPPED|IVTV_F_I_EV_VSYNC)) == 0)
schedule();
finish_wait(&itv->event_waitq, &wait);
+ mutex_lock(&itv->serialize_lock);
if (signal_pending(current)) {
/* return if a signal was received */
IVTV_DEBUG_INFO("User stopped wait for event\n");
@@ -1470,6 +1577,7 @@ static int ivtv_v4l2_do_ioctl(struct inode *inode, struct file *filp,
case VIDIOC_S_AUDOUT:
case VIDIOC_S_EXT_CTRLS:
case VIDIOC_S_FBUF:
+ case VIDIOC_OVERLAY:
ret = v4l2_prio_check(&itv->prio, &id->prio);
if (ret)
return ret;
@@ -1523,6 +1631,7 @@ static int ivtv_v4l2_do_ioctl(struct inode *inode, struct file *filp,
case VIDIOC_TRY_ENCODER_CMD:
case VIDIOC_G_FBUF:
case VIDIOC_S_FBUF:
+ case VIDIOC_OVERLAY:
if (ivtv_debug & IVTV_DBGFLG_IOCTL) {
printk(KERN_INFO "ivtv%d ioctl: ", itv->num);
v4l_printk_ioctl(cmd);
@@ -1563,12 +1672,9 @@ static int ivtv_v4l2_do_ioctl(struct inode *inode, struct file *filp,
return 0;
}
-int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
+static int ivtv_serialized_ioctl(struct ivtv *itv, struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg)
{
- struct ivtv_open_id *id = (struct ivtv_open_id *)filp->private_data;
- struct ivtv *itv = id->itv;
-
/* Filter dvb ioctls that cannot be handled by video_usercopy */
switch (cmd) {
case VIDEO_SELECT_SOURCE:
@@ -1603,3 +1709,16 @@ int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
}
return video_usercopy(inode, filp, cmd, arg, ivtv_v4l2_do_ioctl);
}
+
+int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+ unsigned long arg)
+{
+ struct ivtv_open_id *id = (struct ivtv_open_id *)filp->private_data;
+ struct ivtv *itv = id->itv;
+ int res;
+
+ mutex_lock(&itv->serialize_lock);
+ res = ivtv_serialized_ioctl(itv, inode, filp, cmd, arg);
+ mutex_unlock(&itv->serialize_lock);
+ return res;
+}
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.h b/drivers/media/video/ivtv/ivtv-ioctl.h
index cbccf7a9f65..a03351b6853 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.h
+++ b/drivers/media/video/ivtv/ivtv-ioctl.h
@@ -18,6 +18,9 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_IOCTL_H
+#define IVTV_IOCTL_H
+
u16 service2vbi(int type);
void expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal);
u16 get_service_set(struct v4l2_sliced_vbi_format *fmt);
@@ -26,3 +29,5 @@ int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void *arg);
void ivtv_set_osd_alpha(struct ivtv *itv);
int ivtv_set_speed(struct ivtv *itv, int speed);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index fcd6e7f5f12..fd1688e4757 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -19,12 +19,9 @@
*/
#include "ivtv-driver.h"
-#include "ivtv-firmware.h"
-#include "ivtv-fileops.h"
#include "ivtv-queue.h"
#include "ivtv-udma.h"
#include "ivtv-irq.h"
-#include "ivtv-ioctl.h"
#include "ivtv-mailbox.h"
#include "ivtv-vbi.h"
#include "ivtv-yuv.h"
@@ -45,7 +42,6 @@ static void ivtv_pio_work_handler(struct ivtv *itv)
{
struct ivtv_stream *s = &itv->streams[itv->cur_pio_stream];
struct ivtv_buffer *buf;
- struct list_head *p;
int i = 0;
IVTV_DEBUG_HI_DMA("ivtv_pio_work_handler\n");
@@ -57,21 +53,19 @@ static void ivtv_pio_work_handler(struct ivtv *itv)
return;
}
IVTV_DEBUG_HI_DMA("Process PIO %s\n", s->name);
- buf = list_entry(s->q_dma.list.next, struct ivtv_buffer, list);
- list_for_each(p, &s->q_dma.list) {
- struct ivtv_buffer *buf = list_entry(p, struct ivtv_buffer, list);
- u32 size = s->PIOarray[i].size & 0x3ffff;
+ list_for_each_entry(buf, &s->q_dma.list, list) {
+ u32 size = s->sg_processing[i].size & 0x3ffff;
/* Copy the data from the card to the buffer */
if (s->type == IVTV_DEC_STREAM_TYPE_VBI) {
- memcpy_fromio(buf->buf, itv->dec_mem + s->PIOarray[i].src - IVTV_DECODER_OFFSET, size);
+ memcpy_fromio(buf->buf, itv->dec_mem + s->sg_processing[i].src - IVTV_DECODER_OFFSET, size);
}
else {
- memcpy_fromio(buf->buf, itv->enc_mem + s->PIOarray[i].src, size);
+ memcpy_fromio(buf->buf, itv->enc_mem + s->sg_processing[i].src, size);
}
- if (s->PIOarray[i].size & 0x80000000)
- break;
i++;
+ if (i == s->sg_processing_size)
+ break;
}
write_reg(IVTV_IRQ_ENC_PIO_COMPLETE, 0x44);
}
@@ -100,12 +94,11 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA
{
struct ivtv *itv = s->itv;
struct ivtv_buffer *buf;
- struct list_head *p;
u32 bytes_needed = 0;
u32 offset, size;
u32 UVoffset = 0, UVsize = 0;
int skip_bufs = s->q_predma.buffers;
- int idx = s->SG_length;
+ int idx = s->sg_pending_size;
int rc;
/* sanity checks */
@@ -123,7 +116,7 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA
case IVTV_ENC_STREAM_TYPE_MPG:
offset = data[1];
size = data[2];
- s->dma_pts = 0;
+ s->pending_pts = 0;
break;
case IVTV_ENC_STREAM_TYPE_YUV:
@@ -131,13 +124,13 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA
size = data[2];
UVoffset = data[3];
UVsize = data[4];
- s->dma_pts = ((u64) data[5] << 32) | data[6];
+ s->pending_pts = ((u64) data[5] << 32) | data[6];
break;
case IVTV_ENC_STREAM_TYPE_PCM:
offset = data[1] + 12;
size = data[2] - 12;
- s->dma_pts = read_dec(offset - 8) |
+ s->pending_pts = read_dec(offset - 8) |
((u64)(read_dec(offset - 12)) << 32);
if (itv->has_cx23415)
offset += IVTV_DECODER_OFFSET;
@@ -150,13 +143,13 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA
IVTV_DEBUG_INFO("VBI offset == 0\n");
return -1;
}
- s->dma_pts = read_enc(offset - 4) | ((u64)read_enc(offset - 8) << 32);
+ s->pending_pts = read_enc(offset - 4) | ((u64)read_enc(offset - 8) << 32);
break;
case IVTV_DEC_STREAM_TYPE_VBI:
size = read_dec(itv->vbi.dec_start + 4) + 8;
offset = read_dec(itv->vbi.dec_start) + itv->vbi.dec_start;
- s->dma_pts = 0;
+ s->pending_pts = 0;
offset += IVTV_DECODER_OFFSET;
break;
default:
@@ -165,17 +158,17 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA
}
/* if this is the start of the DMA then fill in the magic cookie */
- if (s->SG_length == 0) {
+ if (s->sg_pending_size == 0 && ivtv_use_dma(s)) {
if (itv->has_cx23415 && (s->type == IVTV_ENC_STREAM_TYPE_PCM ||
s->type == IVTV_DEC_STREAM_TYPE_VBI)) {
- s->dma_backup = read_dec(offset - IVTV_DECODER_OFFSET);
+ s->pending_backup = read_dec(offset - IVTV_DECODER_OFFSET);
write_dec_sync(cpu_to_le32(DMA_MAGIC_COOKIE), offset - IVTV_DECODER_OFFSET);
}
else {
- s->dma_backup = read_enc(offset);
+ s->pending_backup = read_enc(offset);
write_enc_sync(cpu_to_le32(DMA_MAGIC_COOKIE), offset);
}
- s->dma_offset = offset;
+ s->pending_offset = offset;
}
bytes_needed = size;
@@ -202,18 +195,17 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA
}
s->buffers_stolen = rc;
- /* got the buffers, now fill in SGarray (DMA) */
+ /* got the buffers, now fill in sg_pending */
buf = list_entry(s->q_predma.list.next, struct ivtv_buffer, list);
memset(buf->buf, 0, 128);
- list_for_each(p, &s->q_predma.list) {
- struct ivtv_buffer *buf = list_entry(p, struct ivtv_buffer, list);
-
+ list_for_each_entry(buf, &s->q_predma.list, list) {
if (skip_bufs-- > 0)
continue;
- s->SGarray[idx].dst = cpu_to_le32(buf->dma_handle);
- s->SGarray[idx].src = cpu_to_le32(offset);
- s->SGarray[idx].size = cpu_to_le32(s->buf_size);
+ s->sg_pending[idx].dst = buf->dma_handle;
+ s->sg_pending[idx].src = offset;
+ s->sg_pending[idx].size = s->buf_size;
buf->bytesused = (size < s->buf_size) ? size : s->buf_size;
+ buf->dma_xfer_cnt = s->dma_xfer_cnt;
s->q_predma.bytesused += buf->bytesused;
size -= buf->bytesused;
@@ -229,7 +221,7 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA
}
idx++;
}
- s->SG_length = idx;
+ s->sg_pending_size = idx;
return 0;
}
@@ -251,7 +243,7 @@ static void dma_post(struct ivtv_stream *s)
/* Sync Buffer */
ivtv_buf_sync_for_cpu(s, buf);
- if (x == 0) {
+ if (x == 0 && ivtv_use_dma(s)) {
offset = s->dma_last_offset;
if (u32buf[offset / 4] != DMA_MAGIC_COOKIE)
{
@@ -286,14 +278,12 @@ static void dma_post(struct ivtv_stream *s)
/* flag byteswap ABCD -> DCBA for MPG & VBI data outside irq */
if (s->type == IVTV_ENC_STREAM_TYPE_MPG ||
s->type == IVTV_ENC_STREAM_TYPE_VBI)
- set_bit(IVTV_F_B_NEED_BUF_SWAP, &buf->b_flags);
+ buf->b_flags |= IVTV_F_B_NEED_BUF_SWAP;
}
if (buf)
buf->bytesused += s->dma_last_offset;
if (buf && s->type == IVTV_DEC_STREAM_TYPE_VBI) {
- list_for_each(p, &s->q_dma.list) {
- buf = list_entry(p, struct ivtv_buffer, list);
-
+ list_for_each_entry(buf, &s->q_dma.list, list) {
/* Parse and Groom VBI Data */
s->q_dma.bytesused -= buf->bytesused;
ivtv_process_vbi_data(itv, buf, 0, s->type);
@@ -313,7 +303,6 @@ void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock)
{
struct ivtv *itv = s->itv;
struct ivtv_buffer *buf;
- struct list_head *p;
u32 y_size = itv->params.height * itv->params.width;
u32 uv_offset = offset + IVTV_YUV_BUFFER_UV_OFFSET;
int y_done = 0;
@@ -322,18 +311,15 @@ void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock)
int idx = 0;
IVTV_DEBUG_HI_DMA("DEC PREPARE DMA %s: %08x %08x\n", s->name, s->q_predma.bytesused, offset);
- buf = list_entry(s->q_predma.list.next, struct ivtv_buffer, list);
- list_for_each(p, &s->q_predma.list) {
- struct ivtv_buffer *buf = list_entry(p, struct ivtv_buffer, list);
-
+ list_for_each_entry(buf, &s->q_predma.list, list) {
/* YUV UV Offset from Y Buffer */
if (s->type == IVTV_DEC_STREAM_TYPE_YUV && !y_done && bytes_written >= y_size) {
offset = uv_offset;
y_done = 1;
}
- s->SGarray[idx].src = cpu_to_le32(buf->dma_handle);
- s->SGarray[idx].dst = cpu_to_le32(offset);
- s->SGarray[idx].size = cpu_to_le32(buf->bytesused);
+ s->sg_pending[idx].src = buf->dma_handle;
+ s->sg_pending[idx].dst = offset;
+ s->sg_pending[idx].size = buf->bytesused;
offset += buf->bytesused;
bytes_written += buf->bytesused;
@@ -342,10 +328,7 @@ void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock)
ivtv_buf_sync_for_device(s, buf);
idx++;
}
- s->SG_length = idx;
-
- /* Mark last buffer size for Interrupt flag */
- s->SGarray[s->SG_length - 1].size |= cpu_to_le32(0x80000000);
+ s->sg_pending_size = idx;
/* Sync Hardware SG List of buffers */
ivtv_stream_sync_for_device(s);
@@ -361,6 +344,34 @@ void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock)
spin_unlock_irqrestore(&itv->dma_reg_lock, flags);
}
+static void ivtv_dma_enc_start_xfer(struct ivtv_stream *s)
+{
+ struct ivtv *itv = s->itv;
+
+ s->sg_dma->src = cpu_to_le32(s->sg_processing[s->sg_processed].src);
+ s->sg_dma->dst = cpu_to_le32(s->sg_processing[s->sg_processed].dst);
+ s->sg_dma->size = cpu_to_le32(s->sg_processing[s->sg_processed].size | 0x80000000);
+ s->sg_processed++;
+ /* Sync Hardware SG List of buffers */
+ ivtv_stream_sync_for_device(s);
+ write_reg(s->sg_handle, IVTV_REG_ENCDMAADDR);
+ write_reg_sync(read_reg(IVTV_REG_DMAXFER) | 0x02, IVTV_REG_DMAXFER);
+}
+
+static void ivtv_dma_dec_start_xfer(struct ivtv_stream *s)
+{
+ struct ivtv *itv = s->itv;
+
+ s->sg_dma->src = cpu_to_le32(s->sg_processing[s->sg_processed].src);
+ s->sg_dma->dst = cpu_to_le32(s->sg_processing[s->sg_processed].dst);
+ s->sg_dma->size = cpu_to_le32(s->sg_processing[s->sg_processed].size | 0x80000000);
+ s->sg_processed++;
+ /* Sync Hardware SG List of buffers */
+ ivtv_stream_sync_for_device(s);
+ write_reg(s->sg_handle, IVTV_REG_DECDMAADDR);
+ write_reg_sync(read_reg(IVTV_REG_DMAXFER) | 0x01, IVTV_REG_DMAXFER);
+}
+
/* start the encoder DMA */
static void ivtv_dma_enc_start(struct ivtv_stream *s)
{
@@ -374,8 +385,7 @@ static void ivtv_dma_enc_start(struct ivtv_stream *s)
ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused);
if (ivtv_use_dma(s))
- s->SGarray[s->SG_length - 1].size =
- cpu_to_le32(le32_to_cpu(s->SGarray[s->SG_length - 1].size) + 256);
+ s->sg_pending[s->sg_pending_size - 1].size += 256;
/* If this is an MPEG stream, and VBI data is also pending, then append the
VBI DMA to the MPEG DMA and transfer both sets of data at once.
@@ -386,43 +396,39 @@ static void ivtv_dma_enc_start(struct ivtv_stream *s)
sure we only use the MPEG DMA to transfer the VBI DMA if both are in
use. This way no conflicts occur. */
clear_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags);
- if (s->type == IVTV_ENC_STREAM_TYPE_MPG && s_vbi->SG_length &&
- s->SG_length + s_vbi->SG_length <= s->buffers) {
+ if (s->type == IVTV_ENC_STREAM_TYPE_MPG && s_vbi->sg_pending_size &&
+ s->sg_pending_size + s_vbi->sg_pending_size <= s->buffers) {
ivtv_queue_move(s_vbi, &s_vbi->q_predma, NULL, &s_vbi->q_dma, s_vbi->q_predma.bytesused);
if (ivtv_use_dma(s_vbi))
- s_vbi->SGarray[s_vbi->SG_length - 1].size = cpu_to_le32(le32_to_cpu(s_vbi->SGarray[s->SG_length - 1].size) + 256);
- for (i = 0; i < s_vbi->SG_length; i++) {
- s->SGarray[s->SG_length++] = s_vbi->SGarray[i];
+ s_vbi->sg_pending[s_vbi->sg_pending_size - 1].size += 256;
+ for (i = 0; i < s_vbi->sg_pending_size; i++) {
+ s->sg_pending[s->sg_pending_size++] = s_vbi->sg_pending[i];
}
- itv->vbi.dma_offset = s_vbi->dma_offset;
- s_vbi->SG_length = 0;
+ s_vbi->dma_offset = s_vbi->pending_offset;
+ s_vbi->sg_pending_size = 0;
+ s_vbi->dma_xfer_cnt++;
set_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags);
IVTV_DEBUG_HI_DMA("include DMA for %s\n", s->name);
}
- /* Mark last buffer size for Interrupt flag */
- s->SGarray[s->SG_length - 1].size |= cpu_to_le32(0x80000000);
-
- if (s->type == IVTV_ENC_STREAM_TYPE_VBI)
- set_bit(IVTV_F_I_ENC_VBI, &itv->i_flags);
- else
- clear_bit(IVTV_F_I_ENC_VBI, &itv->i_flags);
+ s->dma_xfer_cnt++;
+ memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size);
+ s->sg_processing_size = s->sg_pending_size;
+ s->sg_pending_size = 0;
+ s->sg_processed = 0;
+ s->dma_offset = s->pending_offset;
+ s->dma_backup = s->pending_backup;
+ s->dma_pts = s->pending_pts;
if (ivtv_use_pio(s)) {
- for (i = 0; i < s->SG_length; i++) {
- s->PIOarray[i].src = le32_to_cpu(s->SGarray[i].src);
- s->PIOarray[i].size = le32_to_cpu(s->SGarray[i].size);
- }
set_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags);
set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags);
set_bit(IVTV_F_I_PIO, &itv->i_flags);
itv->cur_pio_stream = s->type;
}
else {
- /* Sync Hardware SG List of buffers */
- ivtv_stream_sync_for_device(s);
- write_reg(s->SG_handle, IVTV_REG_ENCDMAADDR);
- write_reg_sync(read_reg(IVTV_REG_DMAXFER) | 0x02, IVTV_REG_DMAXFER);
+ itv->dma_retries = 0;
+ ivtv_dma_enc_start_xfer(s);
set_bit(IVTV_F_I_DMA, &itv->i_flags);
itv->cur_dma_stream = s->type;
itv->dma_timer.expires = jiffies + msecs_to_jiffies(100);
@@ -436,10 +442,15 @@ static void ivtv_dma_dec_start(struct ivtv_stream *s)
if (s->q_predma.bytesused)
ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused);
+ s->dma_xfer_cnt++;
+ memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size);
+ s->sg_processing_size = s->sg_pending_size;
+ s->sg_pending_size = 0;
+ s->sg_processed = 0;
+
IVTV_DEBUG_HI_DMA("start DMA for %s\n", s->name);
- /* put SG Handle into register 0x0c */
- write_reg(s->SG_handle, IVTV_REG_DECDMAADDR);
- write_reg_sync(read_reg(IVTV_REG_DMAXFER) | 0x01, IVTV_REG_DMAXFER);
+ itv->dma_retries = 0;
+ ivtv_dma_dec_start_xfer(s);
set_bit(IVTV_F_I_DMA, &itv->i_flags);
itv->cur_dma_stream = s->type;
itv->dma_timer.expires = jiffies + msecs_to_jiffies(100);
@@ -450,27 +461,44 @@ static void ivtv_irq_dma_read(struct ivtv *itv)
{
struct ivtv_stream *s = NULL;
struct ivtv_buffer *buf;
- int hw_stream_type;
+ int hw_stream_type = 0;
IVTV_DEBUG_HI_IRQ("DEC DMA READ\n");
- del_timer(&itv->dma_timer);
- if (read_reg(IVTV_REG_DMASTATUS) & 0x14) {
- IVTV_DEBUG_WARN("DEC DMA ERROR %x\n", read_reg(IVTV_REG_DMASTATUS));
- write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS);
+ if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags) && itv->cur_dma_stream < 0) {
+ del_timer(&itv->dma_timer);
+ return;
}
+
if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
- if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags)) {
- s = &itv->streams[IVTV_DEC_STREAM_TYPE_YUV];
- hw_stream_type = 2;
+ s = &itv->streams[itv->cur_dma_stream];
+ ivtv_stream_sync_for_cpu(s);
+
+ if (read_reg(IVTV_REG_DMASTATUS) & 0x14) {
+ IVTV_DEBUG_WARN("DEC DMA ERROR %x (xfer %d of %d, retry %d)\n",
+ read_reg(IVTV_REG_DMASTATUS),
+ s->sg_processed, s->sg_processing_size, itv->dma_retries);
+ write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS);
+ if (itv->dma_retries == 3) {
+ /* Too many retries, give up on this frame */
+ itv->dma_retries = 0;
+ s->sg_processed = s->sg_processing_size;
+ }
+ else {
+ /* Retry, starting with the first xfer segment.
+ Just retrying the current segment is not sufficient. */
+ s->sg_processed = 0;
+ itv->dma_retries++;
+ }
}
- else {
- s = &itv->streams[IVTV_DEC_STREAM_TYPE_MPG];
- hw_stream_type = 0;
+ if (s->sg_processed < s->sg_processing_size) {
+ /* DMA next buffer */
+ ivtv_dma_dec_start_xfer(s);
+ return;
}
+ if (s->type == IVTV_DEC_STREAM_TYPE_YUV)
+ hw_stream_type = 2;
IVTV_DEBUG_HI_DMA("DEC DATA READ %s: %d\n", s->name, s->q_dma.bytesused);
- ivtv_stream_sync_for_cpu(s);
-
/* For some reason must kick the firmware, like PIO mode,
I think this tells the firmware we are done and the size
of the xfer so it can calculate what we need next.
@@ -487,6 +515,7 @@ static void ivtv_irq_dma_read(struct ivtv *itv)
}
wake_up(&s->waitq);
}
+ del_timer(&itv->dma_timer);
clear_bit(IVTV_F_I_UDMA, &itv->i_flags);
clear_bit(IVTV_F_I_DMA, &itv->i_flags);
itv->cur_dma_stream = -1;
@@ -498,33 +527,46 @@ static void ivtv_irq_enc_dma_complete(struct ivtv *itv)
u32 data[CX2341X_MBOX_MAX_DATA];
struct ivtv_stream *s;
- del_timer(&itv->dma_timer);
ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, data);
- IVTV_DEBUG_HI_IRQ("ENC DMA COMPLETE %x %d\n", data[0], data[1]);
- if (test_and_clear_bit(IVTV_F_I_ENC_VBI, &itv->i_flags))
- data[1] = 3;
- else if (data[1] > 2)
+ IVTV_DEBUG_HI_IRQ("ENC DMA COMPLETE %x %d (%d)\n", data[0], data[1], itv->cur_dma_stream);
+ if (itv->cur_dma_stream < 0) {
+ del_timer(&itv->dma_timer);
return;
- s = &itv->streams[ivtv_stream_map[data[1]]];
+ }
+ s = &itv->streams[itv->cur_dma_stream];
+ ivtv_stream_sync_for_cpu(s);
+
if (data[0] & 0x18) {
- IVTV_DEBUG_WARN("ENC DMA ERROR %x\n", data[0]);
+ IVTV_DEBUG_WARN("ENC DMA ERROR %x (offset %08x, xfer %d of %d, retry %d)\n", data[0],
+ s->dma_offset, s->sg_processed, s->sg_processing_size, itv->dma_retries);
write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS);
- ivtv_vapi(itv, CX2341X_ENC_SCHED_DMA_TO_HOST, 3, 0, 0, data[1]);
+ if (itv->dma_retries == 3) {
+ /* Too many retries, give up on this frame */
+ itv->dma_retries = 0;
+ s->sg_processed = s->sg_processing_size;
+ }
+ else {
+ /* Retry, starting with the first xfer segment.
+ Just retrying the current segment is not sufficient. */
+ s->sg_processed = 0;
+ itv->dma_retries++;
+ }
+ }
+ if (s->sg_processed < s->sg_processing_size) {
+ /* DMA next buffer */
+ ivtv_dma_enc_start_xfer(s);
+ return;
}
- s->SG_length = 0;
+ del_timer(&itv->dma_timer);
clear_bit(IVTV_F_I_DMA, &itv->i_flags);
itv->cur_dma_stream = -1;
dma_post(s);
- ivtv_stream_sync_for_cpu(s);
if (test_and_clear_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags)) {
- u32 tmp;
-
s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI];
- tmp = s->dma_offset;
- s->dma_offset = itv->vbi.dma_offset;
dma_post(s);
- s->dma_offset = tmp;
}
+ s->sg_processing_size = 0;
+ s->sg_processed = 0;
wake_up(&itv->dma_waitq);
}
@@ -538,8 +580,6 @@ static void ivtv_irq_enc_pio_complete(struct ivtv *itv)
}
s = &itv->streams[itv->cur_pio_stream];
IVTV_DEBUG_HI_IRQ("ENC PIO COMPLETE %s\n", s->name);
- s->SG_length = 0;
- clear_bit(IVTV_F_I_ENC_VBI, &itv->i_flags);
clear_bit(IVTV_F_I_PIO, &itv->i_flags);
itv->cur_pio_stream = -1;
dma_post(s);
@@ -551,13 +591,8 @@ static void ivtv_irq_enc_pio_complete(struct ivtv *itv)
ivtv_vapi(itv, CX2341X_ENC_SCHED_DMA_TO_HOST, 3, 0, 0, 2);
clear_bit(IVTV_F_I_PIO, &itv->i_flags);
if (test_and_clear_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags)) {
- u32 tmp;
-
s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI];
- tmp = s->dma_offset;
- s->dma_offset = itv->vbi.dma_offset;
dma_post(s);
- s->dma_offset = tmp;
}
wake_up(&itv->dma_waitq);
}
@@ -569,19 +604,23 @@ static void ivtv_irq_dma_err(struct ivtv *itv)
del_timer(&itv->dma_timer);
ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, data);
IVTV_DEBUG_WARN("DMA ERROR %08x %08x %08x %d\n", data[0], data[1],
- read_reg(IVTV_REG_DMASTATUS), itv->cur_dma_stream);
+ read_reg(IVTV_REG_DMASTATUS), itv->cur_dma_stream);
+ write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS);
if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags) &&
itv->cur_dma_stream >= 0 && itv->cur_dma_stream < IVTV_MAX_STREAMS) {
struct ivtv_stream *s = &itv->streams[itv->cur_dma_stream];
/* retry */
- write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS);
if (s->type >= IVTV_DEC_STREAM_TYPE_MPG)
ivtv_dma_dec_start(s);
else
ivtv_dma_enc_start(s);
return;
}
+ if (test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
+ ivtv_udma_start(itv);
+ return;
+ }
clear_bit(IVTV_F_I_UDMA, &itv->i_flags);
clear_bit(IVTV_F_I_DMA, &itv->i_flags);
itv->cur_dma_stream = -1;
@@ -625,14 +664,12 @@ static void ivtv_irq_enc_vbi_cap(struct ivtv *itv)
DMA the data. Since at most four VBI DMA buffers are available,
we just drop the old requests when there are already three
requests queued. */
- if (s->SG_length > 2) {
- struct list_head *p;
- list_for_each(p, &s->q_predma.list) {
- struct ivtv_buffer *buf = list_entry(p, struct ivtv_buffer, list);
+ if (s->sg_pending_size > 2) {
+ struct ivtv_buffer *buf;
+ list_for_each_entry(buf, &s->q_predma.list, list)
ivtv_buf_sync_for_cpu(s, buf);
- }
ivtv_queue_move(s, &s->q_predma, NULL, &s->q_free, 0);
- s->SG_length = 0;
+ s->sg_pending_size = 0;
}
/* if we can append the data, and the MPEG stream isn't capturing,
then start a DMA request for just the VBI data. */
@@ -698,23 +735,27 @@ static void ivtv_irq_vsync(struct ivtv *itv)
if (0) IVTV_DEBUG_IRQ("DEC VSYNC\n");
- if (((frame ^ itv->yuv_info.lace_sync_field) == 0 && ((itv->lastVsyncFrame & 1) ^ itv->yuv_info.lace_sync_field)) ||
- (frame != (itv->lastVsyncFrame & 1) && !itv->yuv_info.frame_interlaced)) {
+ if (((frame ^ itv->yuv_info.sync_field[last_dma_frame]) == 0 &&
+ ((itv->last_vsync_field & 1) ^ itv->yuv_info.sync_field[last_dma_frame])) ||
+ (frame != (itv->last_vsync_field & 1) && !itv->yuv_info.frame_interlaced)) {
int next_dma_frame = last_dma_frame;
- if (next_dma_frame >= 0 && next_dma_frame != atomic_read(&itv->yuv_info.next_fill_frame)) {
- write_reg(yuv_offset[next_dma_frame] >> 4, 0x82c);
- write_reg((yuv_offset[next_dma_frame] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x830);
- write_reg(yuv_offset[next_dma_frame] >> 4, 0x834);
- write_reg((yuv_offset[next_dma_frame] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x838);
- next_dma_frame = (next_dma_frame + 1) & 0x3;
- atomic_set(&itv->yuv_info.next_dma_frame, next_dma_frame);
+ if (!(itv->yuv_info.frame_interlaced && itv->yuv_info.field_delay[next_dma_frame] && itv->yuv_info.fields_lapsed < 1)) {
+ if (next_dma_frame >= 0 && next_dma_frame != atomic_read(&itv->yuv_info.next_fill_frame)) {
+ write_reg(yuv_offset[next_dma_frame] >> 4, 0x82c);
+ write_reg((yuv_offset[next_dma_frame] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x830);
+ write_reg(yuv_offset[next_dma_frame] >> 4, 0x834);
+ write_reg((yuv_offset[next_dma_frame] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x838);
+ next_dma_frame = (next_dma_frame + 1) & 0x3;
+ atomic_set(&itv->yuv_info.next_dma_frame, next_dma_frame);
+ itv->yuv_info.fields_lapsed = -1;
+ }
}
}
- if (frame != (itv->lastVsyncFrame & 1)) {
+ if (frame != (itv->last_vsync_field & 1)) {
struct ivtv_stream *s = ivtv_get_output_stream(itv);
- itv->lastVsyncFrame += 1;
+ itv->last_vsync_field += 1;
if (frame == 0) {
clear_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags);
clear_bit(IVTV_F_I_EV_VSYNC_FIELD, &itv->i_flags);
@@ -731,7 +772,10 @@ static void ivtv_irq_vsync(struct ivtv *itv)
wake_up(&s->waitq);
/* Send VBI to saa7127 */
- if (frame) {
+ if (frame && (itv->output_mode == OUT_PASSTHROUGH ||
+ test_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags) ||
+ test_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags) ||
+ test_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags))) {
set_bit(IVTV_F_I_WORK_HANDLER_VBI, &itv->i_flags);
set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags);
}
@@ -749,10 +793,12 @@ static void ivtv_irq_vsync(struct ivtv *itv)
set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags);
}
}
+
+ itv->yuv_info.fields_lapsed ++;
}
}
-#define IVTV_IRQ_DMA (IVTV_IRQ_DMA_READ | IVTV_IRQ_ENC_DMA_COMPLETE | IVTV_IRQ_DMA_ERR | IVTV_IRQ_ENC_START_CAP | IVTV_IRQ_ENC_VBI_CAP | IVTV_IRQ_DEC_DATA_REQ)
+#define IVTV_IRQ_DMA (IVTV_IRQ_DMA_READ | IVTV_IRQ_ENC_DMA_COMPLETE | IVTV_IRQ_DMA_ERR | IVTV_IRQ_ENC_START_CAP | IVTV_IRQ_ENC_VBI_CAP | IVTV_IRQ_DEC_DATA_REQ | IVTV_IRQ_DEC_VBI_RE_INSERT)
irqreturn_t ivtv_irq_handler(int irq, void *dev_id)
{
@@ -777,7 +823,7 @@ irqreturn_t ivtv_irq_handler(int irq, void *dev_id)
*/
if (~itv->irqmask & IVTV_IRQ_DEC_VSYNC) {
/* vsync is enabled, see if we're in a new field */
- if ((itv->lastVsyncFrame & 1) != (read_reg(0x28c0) & 1)) {
+ if ((itv->last_vsync_field & 1) != (read_reg(0x28c0) & 1)) {
/* New field, looks like we missed it */
IVTV_DEBUG_YUV("VSync interrupt missed %d\n",read_reg(0x28c0)>>16);
vsync_force = 1;
@@ -831,7 +877,7 @@ irqreturn_t ivtv_irq_handler(int irq, void *dev_id)
if (combo & IVTV_IRQ_ENC_EOS) {
IVTV_DEBUG_IRQ("ENC EOS\n");
set_bit(IVTV_F_I_EOS, &itv->i_flags);
- wake_up(&itv->cap_w);
+ wake_up(&itv->eos_waitq);
}
if (combo & IVTV_IRQ_DEC_DATA_REQ) {
@@ -853,8 +899,9 @@ irqreturn_t ivtv_irq_handler(int irq, void *dev_id)
}
if ((combo & IVTV_IRQ_DMA) && !test_bit(IVTV_F_I_DMA, &itv->i_flags)) {
+ itv->irq_rr_idx++;
for (i = 0; i < IVTV_MAX_STREAMS; i++) {
- int idx = (i + itv->irq_rr_idx++) % IVTV_MAX_STREAMS;
+ int idx = (i + itv->irq_rr_idx) % IVTV_MAX_STREAMS;
struct ivtv_stream *s = &itv->streams[idx];
if (!test_and_clear_bit(IVTV_F_S_DMA_PENDING, &s->s_flags))
@@ -871,8 +918,9 @@ irqreturn_t ivtv_irq_handler(int irq, void *dev_id)
}
if ((combo & IVTV_IRQ_DMA) && !test_bit(IVTV_F_I_PIO, &itv->i_flags)) {
+ itv->irq_rr_idx++;
for (i = 0; i < IVTV_MAX_STREAMS; i++) {
- int idx = (i + itv->irq_rr_idx++) % IVTV_MAX_STREAMS;
+ int idx = (i + itv->irq_rr_idx) % IVTV_MAX_STREAMS;
struct ivtv_stream *s = &itv->streams[idx];
if (!test_and_clear_bit(IVTV_F_S_PIO_PENDING, &s->s_flags))
@@ -883,8 +931,9 @@ irqreturn_t ivtv_irq_handler(int irq, void *dev_id)
}
}
- if (test_and_clear_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags))
+ if (test_and_clear_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags)) {
queue_work(itv->irq_work_queues, &itv->irq_work_queue);
+ }
spin_unlock(&itv->dma_reg_lock);
diff --git a/drivers/media/video/ivtv/ivtv-irq.h b/drivers/media/video/ivtv/ivtv-irq.h
index a43348a3030..f879a5822e7 100644
--- a/drivers/media/video/ivtv/ivtv-irq.h
+++ b/drivers/media/video/ivtv/ivtv-irq.h
@@ -19,8 +19,35 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_IRQ_H
+#define IVTV_IRQ_H
+
+#define IVTV_IRQ_ENC_START_CAP (0x1 << 31)
+#define IVTV_IRQ_ENC_EOS (0x1 << 30)
+#define IVTV_IRQ_ENC_VBI_CAP (0x1 << 29)
+#define IVTV_IRQ_ENC_VIM_RST (0x1 << 28)
+#define IVTV_IRQ_ENC_DMA_COMPLETE (0x1 << 27)
+#define IVTV_IRQ_ENC_PIO_COMPLETE (0x1 << 25)
+#define IVTV_IRQ_DEC_AUD_MODE_CHG (0x1 << 24)
+#define IVTV_IRQ_DEC_DATA_REQ (0x1 << 22)
+#define IVTV_IRQ_DEC_DMA_COMPLETE (0x1 << 20)
+#define IVTV_IRQ_DEC_VBI_RE_INSERT (0x1 << 19)
+#define IVTV_IRQ_DMA_ERR (0x1 << 18)
+#define IVTV_IRQ_DMA_WRITE (0x1 << 17)
+#define IVTV_IRQ_DMA_READ (0x1 << 16)
+#define IVTV_IRQ_DEC_VSYNC (0x1 << 10)
+
+/* IRQ Masks */
+#define IVTV_IRQ_MASK_INIT (IVTV_IRQ_DMA_ERR|IVTV_IRQ_ENC_DMA_COMPLETE|\
+ IVTV_IRQ_DMA_READ|IVTV_IRQ_ENC_PIO_COMPLETE)
+
+#define IVTV_IRQ_MASK_CAPTURE (IVTV_IRQ_ENC_START_CAP | IVTV_IRQ_ENC_EOS)
+#define IVTV_IRQ_MASK_DECODE (IVTV_IRQ_DEC_DATA_REQ|IVTV_IRQ_DEC_AUD_MODE_CHG)
+
irqreturn_t ivtv_irq_handler(int irq, void *dev_id);
void ivtv_irq_work_handler(struct work_struct *work);
void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock);
void ivtv_unfinished_dma(unsigned long arg);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-mailbox.c b/drivers/media/video/ivtv/ivtv-mailbox.c
index 5e3b679202a..b05436da713 100644
--- a/drivers/media/video/ivtv/ivtv-mailbox.c
+++ b/drivers/media/video/ivtv/ivtv-mailbox.c
@@ -225,15 +225,15 @@ static int ivtv_api_call(struct ivtv *itv, int cmd, int args, u32 data[])
}
if (args < 0 || args > CX2341X_MBOX_MAX_DATA ||
cmd < 0 || cmd > 255 || api_info[cmd].name == NULL) {
- IVTV_ERR("Invalid API call: cmd = 0x%02x, args = %d\n", cmd, args);
+ IVTV_ERR("Invalid MB call: cmd = 0x%02x, args = %d\n", cmd, args);
return -EINVAL;
}
if (api_info[cmd].flags & API_HIGH_VOL) {
- IVTV_DEBUG_HI_API("API Call: %s\n", api_info[cmd].name);
+ IVTV_DEBUG_HI_MB("MB Call: %s\n", api_info[cmd].name);
}
else {
- IVTV_DEBUG_API("API Call: %s\n", api_info[cmd].name);
+ IVTV_DEBUG_MB("MB Call: %s\n", api_info[cmd].name);
}
/* clear possibly uninitialized part of data array */
diff --git a/drivers/media/video/ivtv/ivtv-mailbox.h b/drivers/media/video/ivtv/ivtv-mailbox.h
index 79b8aec1437..71a54eef8fc 100644
--- a/drivers/media/video/ivtv/ivtv-mailbox.h
+++ b/drivers/media/video/ivtv/ivtv-mailbox.h
@@ -18,8 +18,16 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_MAILBOX_H
+#define IVTV_MAILBOX_H
+
+#define IVTV_MBOX_DMA_END 8
+#define IVTV_MBOX_DMA 9
+
void ivtv_api_get_data(struct ivtv_mailbox_data *mbox, int mb, u32 data[]);
int ivtv_api(struct ivtv *itv, int cmd, int args, u32 data[]);
int ivtv_vapi_result(struct ivtv *itv, u32 data[CX2341X_MBOX_MAX_DATA], int cmd, int args, ...);
int ivtv_vapi(struct ivtv *itv, int cmd, int args, ...);
int ivtv_api_func(void *priv, int cmd, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-queue.c b/drivers/media/video/ivtv/ivtv-queue.c
index a04f9387f63..39a21671324 100644
--- a/drivers/media/video/ivtv/ivtv-queue.c
+++ b/drivers/media/video/ivtv/ivtv-queue.c
@@ -20,9 +20,7 @@
*/
#include "ivtv-driver.h"
-#include "ivtv-streams.h"
#include "ivtv-queue.h"
-#include "ivtv-mailbox.h"
int ivtv_buf_copy_from_user(struct ivtv_stream *s, struct ivtv_buffer *buf, const char __user *src, int copybytes)
{
@@ -60,6 +58,7 @@ void ivtv_enqueue(struct ivtv_stream *s, struct ivtv_buffer *buf, struct ivtv_qu
buf->bytesused = 0;
buf->readpos = 0;
buf->b_flags = 0;
+ buf->dma_xfer_cnt = 0;
}
spin_lock_irqsave(&s->qlock, flags);
list_add_tail(&buf->list, &q->list);
@@ -87,7 +86,7 @@ struct ivtv_buffer *ivtv_dequeue(struct ivtv_stream *s, struct ivtv_queue *q)
}
static void ivtv_queue_move_buf(struct ivtv_stream *s, struct ivtv_queue *from,
- struct ivtv_queue *to, int clear, int full)
+ struct ivtv_queue *to, int clear)
{
struct ivtv_buffer *buf = list_entry(from->list.next, struct ivtv_buffer, list);
@@ -97,13 +96,7 @@ static void ivtv_queue_move_buf(struct ivtv_stream *s, struct ivtv_queue *from,
from->bytesused -= buf->bytesused - buf->readpos;
/* special handling for q_free */
if (clear)
- buf->bytesused = buf->readpos = buf->b_flags = 0;
- else if (full) {
- /* special handling for stolen buffers, assume
- all bytes are used. */
- buf->bytesused = s->buf_size;
- buf->readpos = buf->b_flags = 0;
- }
+ buf->bytesused = buf->readpos = buf->b_flags = buf->dma_xfer_cnt = 0;
to->buffers++;
to->length += s->buf_size;
to->bytesused += buf->bytesused - buf->readpos;
@@ -112,7 +105,7 @@ static void ivtv_queue_move_buf(struct ivtv_stream *s, struct ivtv_queue *from,
/* Move 'needed_bytes' worth of buffers from queue 'from' into queue 'to'.
If 'needed_bytes' == 0, then move all buffers from 'from' into 'to'.
If 'steal' != NULL, then buffers may also taken from that queue if
- needed.
+ needed, but only if 'from' is the free queue.
The buffer is automatically cleared if it goes to the free queue. It is
also cleared if buffers need to be taken from the 'steal' queue and
@@ -133,7 +126,7 @@ int ivtv_queue_move(struct ivtv_stream *s, struct ivtv_queue *from, struct ivtv_
int rc = 0;
int from_free = from == &s->q_free;
int to_free = to == &s->q_free;
- int bytes_available;
+ int bytes_available, bytes_steal;
spin_lock_irqsave(&s->qlock, flags);
if (needed_bytes == 0) {
@@ -142,32 +135,47 @@ int ivtv_queue_move(struct ivtv_stream *s, struct ivtv_queue *from, struct ivtv_
}
bytes_available = from_free ? from->length : from->bytesused;
- bytes_available += steal ? steal->length : 0;
+ bytes_steal = (from_free && steal) ? steal->length : 0;
- if (bytes_available < needed_bytes) {
+ if (bytes_available + bytes_steal < needed_bytes) {
spin_unlock_irqrestore(&s->qlock, flags);
return -ENOMEM;
}
+ while (bytes_available < needed_bytes) {
+ struct ivtv_buffer *buf = list_entry(steal->list.prev, struct ivtv_buffer, list);
+ u16 dma_xfer_cnt = buf->dma_xfer_cnt;
+
+ /* move buffers from the tail of the 'steal' queue to the tail of the
+ 'from' queue. Always copy all the buffers with the same dma_xfer_cnt
+ value, this ensures that you do not end up with partial frame data
+ if one frame is stored in multiple buffers. */
+ while (dma_xfer_cnt == buf->dma_xfer_cnt) {
+ list_move_tail(steal->list.prev, &from->list);
+ rc++;
+ steal->buffers--;
+ steal->length -= s->buf_size;
+ steal->bytesused -= buf->bytesused - buf->readpos;
+ buf->bytesused = buf->readpos = buf->b_flags = buf->dma_xfer_cnt = 0;
+ from->buffers++;
+ from->length += s->buf_size;
+ bytes_available += s->buf_size;
+ if (list_empty(&steal->list))
+ break;
+ buf = list_entry(steal->list.prev, struct ivtv_buffer, list);
+ }
+ }
if (from_free) {
u32 old_length = to->length;
while (to->length - old_length < needed_bytes) {
- if (list_empty(&from->list))
- from = steal;
- if (from == steal)
- rc++; /* keep track of 'stolen' buffers */
- ivtv_queue_move_buf(s, from, to, 1, 0);
+ ivtv_queue_move_buf(s, from, to, 1);
}
}
else {
u32 old_bytesused = to->bytesused;
while (to->bytesused - old_bytesused < needed_bytes) {
- if (list_empty(&from->list))
- from = steal;
- if (from == steal)
- rc++; /* keep track of 'stolen' buffers */
- ivtv_queue_move_buf(s, from, to, to_free, rc);
+ ivtv_queue_move_buf(s, from, to, to_free);
}
}
spin_unlock_irqrestore(&s->qlock, flags);
@@ -185,7 +193,7 @@ void ivtv_flush_queues(struct ivtv_stream *s)
int ivtv_stream_alloc(struct ivtv_stream *s)
{
struct ivtv *itv = s->itv;
- int SGsize = sizeof(struct ivtv_SG_element) * s->buffers;
+ int SGsize = sizeof(struct ivtv_sg_element) * s->buffers;
int i;
if (s->buffers == 0)
@@ -195,27 +203,33 @@ int ivtv_stream_alloc(struct ivtv_stream *s)
s->dma != PCI_DMA_NONE ? "DMA " : "",
s->name, s->buffers, s->buf_size, s->buffers * s->buf_size / 1024);
- if (ivtv_might_use_pio(s)) {
- s->PIOarray = (struct ivtv_SG_element *)kzalloc(SGsize, GFP_KERNEL);
- if (s->PIOarray == NULL) {
- IVTV_ERR("Could not allocate PIOarray for %s stream\n", s->name);
- return -ENOMEM;
- }
+ s->sg_pending = kzalloc(SGsize, GFP_KERNEL);
+ if (s->sg_pending == NULL) {
+ IVTV_ERR("Could not allocate sg_pending for %s stream\n", s->name);
+ return -ENOMEM;
}
+ s->sg_pending_size = 0;
- /* Allocate DMA SG Arrays */
- s->SGarray = (struct ivtv_SG_element *)kzalloc(SGsize, GFP_KERNEL);
- if (s->SGarray == NULL) {
- IVTV_ERR("Could not allocate SGarray for %s stream\n", s->name);
- if (ivtv_might_use_pio(s)) {
- kfree(s->PIOarray);
- s->PIOarray = NULL;
- }
+ s->sg_processing = kzalloc(SGsize, GFP_KERNEL);
+ if (s->sg_processing == NULL) {
+ IVTV_ERR("Could not allocate sg_processing for %s stream\n", s->name);
+ kfree(s->sg_pending);
+ s->sg_pending = NULL;
+ return -ENOMEM;
+ }
+ s->sg_processing_size = 0;
+
+ s->sg_dma = kzalloc(sizeof(struct ivtv_sg_element), GFP_KERNEL);
+ if (s->sg_dma == NULL) {
+ IVTV_ERR("Could not allocate sg_dma for %s stream\n", s->name);
+ kfree(s->sg_pending);
+ s->sg_pending = NULL;
+ kfree(s->sg_processing);
+ s->sg_processing = NULL;
return -ENOMEM;
}
- s->SG_length = 0;
if (ivtv_might_use_dma(s)) {
- s->SG_handle = pci_map_single(itv->dev, s->SGarray, SGsize, s->dma);
+ s->sg_handle = pci_map_single(itv->dev, s->sg_dma, sizeof(struct ivtv_sg_element), s->dma);
ivtv_stream_sync_for_cpu(s);
}
@@ -262,16 +276,19 @@ void ivtv_stream_free(struct ivtv_stream *s)
}
/* Free SG Array/Lists */
- if (s->SGarray != NULL) {
- if (s->SG_handle != IVTV_DMA_UNMAPPED) {
- pci_unmap_single(s->itv->dev, s->SG_handle,
- sizeof(struct ivtv_SG_element) * s->buffers, PCI_DMA_TODEVICE);
- s->SG_handle = IVTV_DMA_UNMAPPED;
+ if (s->sg_dma != NULL) {
+ if (s->sg_handle != IVTV_DMA_UNMAPPED) {
+ pci_unmap_single(s->itv->dev, s->sg_handle,
+ sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE);
+ s->sg_handle = IVTV_DMA_UNMAPPED;
}
- kfree(s->SGarray);
- kfree(s->PIOarray);
- s->PIOarray = NULL;
- s->SGarray = NULL;
- s->SG_length = 0;
+ kfree(s->sg_pending);
+ kfree(s->sg_processing);
+ kfree(s->sg_dma);
+ s->sg_pending = NULL;
+ s->sg_processing = NULL;
+ s->sg_dma = NULL;
+ s->sg_pending_size = 0;
+ s->sg_processing_size = 0;
}
}
diff --git a/drivers/media/video/ivtv/ivtv-queue.h b/drivers/media/video/ivtv/ivtv-queue.h
index 2ed8d548255..7cfc0c9ab05 100644
--- a/drivers/media/video/ivtv/ivtv-queue.h
+++ b/drivers/media/video/ivtv/ivtv-queue.h
@@ -19,6 +19,9 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_QUEUE_H
+#define IVTV_QUEUE_H
+
#define IVTV_DMA_UNMAPPED ((u32) -1)
#define SLICED_VBI_PIO 1
@@ -79,13 +82,15 @@ void ivtv_stream_free(struct ivtv_stream *s);
static inline void ivtv_stream_sync_for_cpu(struct ivtv_stream *s)
{
if (ivtv_use_dma(s))
- pci_dma_sync_single_for_cpu(s->itv->dev, s->SG_handle,
- sizeof(struct ivtv_SG_element) * s->buffers, PCI_DMA_TODEVICE);
+ pci_dma_sync_single_for_cpu(s->itv->dev, s->sg_handle,
+ sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE);
}
static inline void ivtv_stream_sync_for_device(struct ivtv_stream *s)
{
if (ivtv_use_dma(s))
- pci_dma_sync_single_for_device(s->itv->dev, s->SG_handle,
- sizeof(struct ivtv_SG_element) * s->buffers, PCI_DMA_TODEVICE);
+ pci_dma_sync_single_for_device(s->itv->dev, s->sg_handle,
+ sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE);
}
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-routing.c b/drivers/media/video/ivtv/ivtv-routing.c
new file mode 100644
index 00000000000..398bd33033e
--- /dev/null
+++ b/drivers/media/video/ivtv/ivtv-routing.c
@@ -0,0 +1,116 @@
+/*
+ Audio/video-routing-related ivtv functions.
+ Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
+ Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include "ivtv-driver.h"
+#include "ivtv-i2c.h"
+#include "ivtv-cards.h"
+#include "ivtv-gpio.h"
+#include "ivtv-routing.h"
+
+#include <media/msp3400.h>
+#include <media/upd64031a.h>
+#include <media/upd64083.h>
+
+/* Selects the audio input and output according to the current
+ settings. */
+void ivtv_audio_set_io(struct ivtv *itv)
+{
+ struct v4l2_routing route;
+ u32 audio_input;
+ int mux_input;
+
+ /* Determine which input to use */
+ if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags)) {
+ audio_input = itv->card->radio_input.audio_input;
+ mux_input = itv->card->radio_input.muxer_input;
+ } else {
+ audio_input = itv->card->audio_inputs[itv->audio_input].audio_input;
+ mux_input = itv->card->audio_inputs[itv->audio_input].muxer_input;
+ }
+
+ /* handle muxer chips */
+ route.input = mux_input;
+ route.output = 0;
+ ivtv_i2c_hw(itv, itv->card->hw_muxer, VIDIOC_INT_S_AUDIO_ROUTING, &route);
+
+ route.input = audio_input;
+ if (itv->card->hw_audio & IVTV_HW_MSP34XX) {
+ route.output = MSP_OUTPUT(MSP_SC_IN_DSP_SCART1);
+ }
+ ivtv_i2c_hw(itv, itv->card->hw_audio, VIDIOC_INT_S_AUDIO_ROUTING, &route);
+}
+
+/* Selects the video input and output according to the current
+ settings. */
+void ivtv_video_set_io(struct ivtv *itv)
+{
+ struct v4l2_routing route;
+ int inp = itv->active_input;
+ u32 type;
+
+ route.input = itv->card->video_inputs[inp].video_input;
+ route.output = 0;
+ itv->video_dec_func(itv, VIDIOC_INT_S_VIDEO_ROUTING, &route);
+
+ type = itv->card->video_inputs[inp].video_type;
+
+ if (type == IVTV_CARD_INPUT_VID_TUNER) {
+ route.input = 0; /* Tuner */
+ } else if (type < IVTV_CARD_INPUT_COMPOSITE1) {
+ route.input = 2; /* S-Video */
+ } else {
+ route.input = 1; /* Composite */
+ }
+
+ if (itv->card->hw_video & IVTV_HW_GPIO)
+ ivtv_gpio(itv, VIDIOC_INT_S_VIDEO_ROUTING, &route);
+
+ if (itv->card->hw_video & IVTV_HW_UPD64031A) {
+ if (type == IVTV_CARD_INPUT_VID_TUNER ||
+ type >= IVTV_CARD_INPUT_COMPOSITE1) {
+ /* Composite: GR on, connect to 3DYCS */
+ route.input = UPD64031A_GR_ON | UPD64031A_3DYCS_COMPOSITE;
+ } else {
+ /* S-Video: GR bypassed, turn it off */
+ route.input = UPD64031A_GR_OFF | UPD64031A_3DYCS_DISABLE;
+ }
+ route.input |= itv->card->gr_config;
+
+ ivtv_upd64031a(itv, VIDIOC_INT_S_VIDEO_ROUTING, &route);
+ }
+
+ if (itv->card->hw_video & IVTV_HW_UPD6408X) {
+ route.input = UPD64083_YCS_MODE;
+ if (type > IVTV_CARD_INPUT_VID_TUNER &&
+ type < IVTV_CARD_INPUT_COMPOSITE1) {
+ /* S-Video uses YCNR mode and internal Y-ADC, the upd64031a
+ is not used. */
+ route.input |= UPD64083_YCNR_MODE;
+ }
+ else if (itv->card->hw_video & IVTV_HW_UPD64031A) {
+ /* Use upd64031a output for tuner and composite(CX23416GYC only) inputs */
+ if ((type == IVTV_CARD_INPUT_VID_TUNER)||
+ (itv->card->type == IVTV_CARD_CX23416GYC)) {
+ route.input |= UPD64083_EXT_Y_ADC;
+ }
+ }
+ ivtv_upd64083(itv, VIDIOC_INT_S_VIDEO_ROUTING, &route);
+ }
+}
diff --git a/drivers/media/video/ivtv/ivtv-routing.h b/drivers/media/video/ivtv/ivtv-routing.h
new file mode 100644
index 00000000000..c72a9731ca0
--- /dev/null
+++ b/drivers/media/video/ivtv/ivtv-routing.h
@@ -0,0 +1,27 @@
+/*
+ Audio/video-routing-related ivtv functions.
+ Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
+ Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef IVTV_ROUTING_H
+#define IVTV_ROUTING_H
+
+void ivtv_audio_set_io(struct ivtv *itv);
+void ivtv_video_set_io(struct ivtv *itv);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index 51df3f85503..fd135985e70 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -35,16 +35,13 @@
#include "ivtv-driver.h"
#include "ivtv-fileops.h"
-#include "ivtv-i2c.h"
#include "ivtv-queue.h"
#include "ivtv-mailbox.h"
-#include "ivtv-audio.h"
-#include "ivtv-video.h"
-#include "ivtv-vbi.h"
#include "ivtv-ioctl.h"
#include "ivtv-irq.h"
-#include "ivtv-streams.h"
+#include "ivtv-yuv.h"
#include "ivtv-cards.h"
+#include "ivtv-streams.h"
static struct file_operations ivtv_v4l2_enc_fops = {
.owner = THIS_MODULE,
@@ -66,6 +63,13 @@ static struct file_operations ivtv_v4l2_dec_fops = {
.poll = ivtv_v4l2_dec_poll,
};
+#define IVTV_V4L2_DEC_MPG_OFFSET 16 /* offset from 0 to register decoder mpg v4l2 minors on */
+#define IVTV_V4L2_ENC_PCM_OFFSET 24 /* offset from 0 to register pcm v4l2 minors on */
+#define IVTV_V4L2_ENC_YUV_OFFSET 32 /* offset from 0 to register yuv v4l2 minors on */
+#define IVTV_V4L2_DEC_YUV_OFFSET 48 /* offset from 0 to register decoder yuv v4l2 minors on */
+#define IVTV_V4L2_DEC_VBI_OFFSET 8 /* offset from 0 to register decoder vbi input v4l2 minors on */
+#define IVTV_V4L2_DEC_VOUT_OFFSET 16 /* offset from 0 to register vbi output v4l2 minors on */
+
static struct {
const char *name;
int vfl_type;
@@ -75,7 +79,7 @@ static struct {
struct file_operations *fops;
} ivtv_stream_info[] = {
{ /* IVTV_ENC_STREAM_TYPE_MPG */
- "encoder MPEG",
+ "encoder MPG",
VFL_TYPE_GRABBER, 0,
PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_VIDEO_CAPTURE,
&ivtv_v4l2_enc_fops
@@ -93,7 +97,7 @@ static struct {
&ivtv_v4l2_enc_fops
},
{ /* IVTV_ENC_STREAM_TYPE_PCM */
- "encoder PCM audio",
+ "encoder PCM",
VFL_TYPE_GRABBER, IVTV_V4L2_ENC_PCM_OFFSET,
PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_PRIVATE,
&ivtv_v4l2_enc_fops
@@ -105,7 +109,7 @@ static struct {
&ivtv_v4l2_enc_fops
},
{ /* IVTV_DEC_STREAM_TYPE_MPG */
- "decoder MPEG",
+ "decoder MPG",
VFL_TYPE_GRABBER, IVTV_V4L2_DEC_MPG_OFFSET,
PCI_DMA_TODEVICE, 0, V4L2_BUF_TYPE_VIDEO_OUTPUT,
&ivtv_v4l2_dec_fops
@@ -150,11 +154,11 @@ static void ivtv_stream_init(struct ivtv *itv, int type)
s->dma = ivtv_stream_info[type].dma;
s->buf_size = itv->stream_buf_size[type];
if (s->buf_size)
- s->buffers = itv->options.megabytes[type] * 1024 * 1024 / s->buf_size;
+ s->buffers = (itv->options.kilobytes[type] * 1024 + s->buf_size - 1) / s->buf_size;
spin_lock_init(&s->qlock);
init_waitqueue_head(&s->waitq);
s->id = -1;
- s->SG_handle = IVTV_DMA_UNMAPPED;
+ s->sg_handle = IVTV_DMA_UNMAPPED;
ivtv_queue_init(&s->q_free);
ivtv_queue_init(&s->q_full);
ivtv_queue_init(&s->q_dma);
@@ -192,7 +196,7 @@ static int ivtv_reg_dev(struct ivtv *itv, int type)
/* User explicitly selected 0 buffers for these streams, so don't
create them. */
if (minor >= 0 && ivtv_stream_info[type].dma != PCI_DMA_NONE &&
- itv->options.megabytes[type] == 0) {
+ itv->options.kilobytes[type] == 0) {
IVTV_INFO("Disabled %s device\n", ivtv_stream_info[type].name);
return 0;
}
@@ -238,18 +242,18 @@ static int ivtv_reg_dev(struct ivtv *itv, int type)
switch (vfl_type) {
case VFL_TYPE_GRABBER:
- IVTV_INFO("Registered device video%d for %s (%d MB)\n",
- s->v4l2dev->minor, s->name, itv->options.megabytes[type]);
+ IVTV_INFO("Registered device video%d for %s (%d kB)\n",
+ s->v4l2dev->minor, s->name, itv->options.kilobytes[type]);
break;
case VFL_TYPE_RADIO:
IVTV_INFO("Registered device radio%d for %s\n",
s->v4l2dev->minor - MINOR_VFL_TYPE_RADIO_MIN, s->name);
break;
case VFL_TYPE_VBI:
- if (itv->options.megabytes[type])
- IVTV_INFO("Registered device vbi%d for %s (%d MB)\n",
+ if (itv->options.kilobytes[type])
+ IVTV_INFO("Registered device vbi%d for %s (%d kB)\n",
s->v4l2dev->minor - MINOR_VFL_TYPE_VBI_MIN,
- s->name, itv->options.megabytes[type]);
+ s->name, itv->options.kilobytes[type]);
else
IVTV_INFO("Registered device vbi%d for %s\n",
s->v4l2dev->minor - MINOR_VFL_TYPE_VBI_MIN, s->name);
@@ -314,28 +318,9 @@ static void ivtv_vbi_setup(struct ivtv *itv)
int lines;
int i;
- /* If Embed then streamtype must be Program */
- /* TODO: should we really do this? */
- if (0 && !raw && itv->vbi.insert_mpeg) {
- itv->params.stream_type = 0;
-
- /* assign stream type */
- ivtv_vapi(itv, CX2341X_ENC_SET_STREAM_TYPE, 1, itv->params.stream_type);
- }
-
/* Reset VBI */
ivtv_vapi(itv, CX2341X_ENC_SET_VBI_LINE, 5, 0xffff , 0, 0, 0, 0);
- if (itv->is_60hz) {
- itv->vbi.count = 12;
- itv->vbi.start[0] = 10;
- itv->vbi.start[1] = 273;
- } else { /* PAL/SECAM */
- itv->vbi.count = 18;
- itv->vbi.start[0] = 6;
- itv->vbi.start[1] = 318;
- }
-
/* setup VBI registers */
itv->video_dec_func(itv, VIDIOC_S_FMT, &itv->vbi.in);
@@ -409,8 +394,8 @@ static void ivtv_vbi_setup(struct ivtv *itv)
if (!itv->vbi.fpi)
itv->vbi.fpi = 1;
- IVTV_DEBUG_INFO("Setup VBI start 0x%08x frames %d fpi %d lines 0x%08x\n",
- itv->vbi.enc_start, data[1], itv->vbi.fpi, itv->digitizer);
+ IVTV_DEBUG_INFO("Setup VBI start 0x%08x frames %d fpi %d\n",
+ itv->vbi.enc_start, data[1], itv->vbi.fpi);
/* select VBI lines.
Note that the sliced argument seems to have no effect. */
@@ -446,9 +431,6 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
if (s->v4l2dev == NULL)
return -EINVAL;
- /* Big serialization lock to ensure no two streams are started
- simultaneously: that can give all sorts of weird results. */
- mutex_lock(&itv->serialize_lock);
IVTV_DEBUG_INFO("Start encoder stream %s\n", s->name);
switch (s->type) {
@@ -490,7 +472,6 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
0, sizeof(itv->vbi.sliced_mpeg_size));
break;
default:
- mutex_unlock(&itv->serialize_lock);
return -EINVAL;
}
s->subtype = subtype;
@@ -503,6 +484,8 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
if (atomic_read(&itv->capturing) == 0) {
+ int digitizer;
+
/* Always use frame based mode. Experiments have demonstrated that byte
stream based mode results in dropped frames and corruption. Not often,
but occasionally. Many thanks go to Leonard Orb who spent a lot of
@@ -528,7 +511,14 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
ivtv_vapi(itv, CX2341X_ENC_SET_PLACEHOLDER, 12,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
- ivtv_vapi(itv, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, itv->digitizer, itv->digitizer);
+ if (itv->card->hw_all & (IVTV_HW_SAA7115 | IVTV_HW_SAA717X))
+ digitizer = 0xF1;
+ else if (itv->card->hw_all & IVTV_HW_SAA7114)
+ digitizer = 0xEF;
+ else /* cx25840 */
+ digitizer = 0x140;
+
+ ivtv_vapi(itv, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, digitizer, digitizer);
/* Setup VBI */
if (itv->v4l2_cap & V4L2_CAP_VBI_CAPTURE) {
@@ -563,16 +553,16 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
clear_bit(IVTV_F_I_EOS, &itv->i_flags);
/* Initialize Digitizer for Capture */
+ itv->video_dec_func(itv, VIDIOC_STREAMOFF, 0);
+ ivtv_msleep_timeout(300, 1);
ivtv_vapi(itv, CX2341X_ENC_INITIALIZE_INPUT, 0);
-
- ivtv_msleep_timeout(100, 0);
+ itv->video_dec_func(itv, VIDIOC_STREAMON, 0);
}
/* begin_capture */
if (ivtv_vapi(itv, CX2341X_ENC_START_CAPTURE, 2, captype, subtype))
{
IVTV_DEBUG_WARN( "Error starting capture!\n");
- mutex_unlock(&itv->serialize_lock);
return -EINVAL;
}
@@ -588,7 +578,6 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
/* you're live! sit back and await interrupts :) */
atomic_inc(&itv->capturing);
- mutex_unlock(&itv->serialize_lock);
return 0;
}
@@ -676,10 +665,10 @@ int ivtv_start_v4l2_decode_stream(struct ivtv_stream *s, int gop_offset)
clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
/* Zero out decoder counters */
- writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_FIELD_DISPLAYED].data[0]);
- writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_FIELD_DISPLAYED].data[1]);
- writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_FIELD_DISPLAYED].data[2]);
- writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_FIELD_DISPLAYED].data[3]);
+ writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA_END].data[0]);
+ writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA_END].data[1]);
+ writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA_END].data[2]);
+ writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA_END].data[3]);
writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA].data[0]);
writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA].data[1]);
writel(0, &itv->dec_mbox.mbox[IVTV_MBOX_DMA].data[2]);
@@ -720,9 +709,7 @@ int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end)
struct ivtv *itv = s->itv;
DECLARE_WAITQUEUE(wait, current);
int cap_type;
- unsigned long then;
int stopmode;
- u32 data[CX2341X_MBOX_MAX_DATA];
if (s->v4l2dev == NULL)
return -EINVAL;
@@ -764,15 +751,13 @@ int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end)
/* when: 0 = end of GOP 1 = NOW!, type: 0 = mpeg, subtype: 3 = video+audio */
ivtv_vapi(itv, CX2341X_ENC_STOP_CAPTURE, 3, stopmode, cap_type, s->subtype);
- then = jiffies;
-
if (!test_bit(IVTV_F_S_PASSTHROUGH, &s->s_flags)) {
if (s->type == IVTV_ENC_STREAM_TYPE_MPG && gop_end) {
/* only run these if we're shutting down the last cap */
unsigned long duration;
+ unsigned long then = jiffies;
- then = jiffies;
- add_wait_queue(&itv->cap_w, &wait);
+ add_wait_queue(&itv->eos_waitq, &wait);
set_current_state(TASK_INTERRUPTIBLE);
@@ -798,31 +783,12 @@ int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end)
IVTV_DEBUG_INFO("%s: EOS took %lu ms to occur.\n", s->name, duration);
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&itv->cap_w, &wait);
+ remove_wait_queue(&itv->eos_waitq, &wait);
+ set_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
}
- then = jiffies;
- /* Make sure DMA is complete */
- add_wait_queue(&s->waitq, &wait);
- do {
- /* check if DMA is pending */
- if ((s->type == IVTV_ENC_STREAM_TYPE_MPG) && /* MPG Only */
- (read_reg(IVTV_REG_DMASTATUS) & 0x02)) {
- /* Check for last DMA */
- ivtv_vapi_result(itv, data, CX2341X_ENC_GET_SEQ_END, 2, 0, 0);
-
- if (data[0] == 1) {
- IVTV_DEBUG_DMA("%s: Last DMA of size 0x%08x\n", s->name, data[1]);
- break;
- }
- } else if (read_reg(IVTV_REG_DMASTATUS) & 0x02) {
- break;
- }
- } while (!ivtv_msleep_timeout(10, 1) &&
- then + msecs_to_jiffies(2000) > jiffies);
-
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&s->waitq, &wait);
+ /* Handle any pending interrupts */
+ ivtv_msleep_timeout(100, 1);
}
atomic_dec(&itv->capturing);
@@ -830,19 +796,16 @@ int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end)
/* Clear capture and no-read bits */
clear_bit(IVTV_F_S_STREAMING, &s->s_flags);
- /* ensure these global cleanup actions are done only once */
- mutex_lock(&itv->serialize_lock);
-
if (s->type == IVTV_ENC_STREAM_TYPE_VBI)
ivtv_set_irq_mask(itv, IVTV_IRQ_ENC_VBI_CAP);
if (atomic_read(&itv->capturing) > 0) {
- mutex_unlock(&itv->serialize_lock);
return 0;
}
/* Set the following Interrupt mask bits for capture */
ivtv_set_irq_mask(itv, IVTV_IRQ_MASK_CAPTURE);
+ del_timer(&itv->dma_timer);
/* event notification (off) */
if (test_and_clear_bit(IVTV_F_I_DIG_RST, &itv->i_flags)) {
@@ -853,7 +816,6 @@ int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end)
}
wake_up(&s->waitq);
- mutex_unlock(&itv->serialize_lock);
return 0;
}
@@ -900,6 +862,7 @@ int ivtv_stop_v4l2_decode_stream(struct ivtv_stream *s, int flags, u64 pts)
ivtv_vapi(itv, CX2341X_DEC_SET_EVENT_NOTIFICATION, 4, 0, 0, IVTV_IRQ_DEC_AUD_MODE_CHG, -1);
ivtv_set_irq_mask(itv, IVTV_IRQ_MASK_DECODE);
+ del_timer(&itv->dma_timer);
clear_bit(IVTV_F_S_NEEDS_DATA, &s->s_flags);
clear_bit(IVTV_F_S_STREAMING, &s->s_flags);
diff --git a/drivers/media/video/ivtv/ivtv-streams.h b/drivers/media/video/ivtv/ivtv-streams.h
index 8597b75384a..8f5f5b1c7c8 100644
--- a/drivers/media/video/ivtv/ivtv-streams.h
+++ b/drivers/media/video/ivtv/ivtv-streams.h
@@ -18,6 +18,9 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_STREAMS_H
+#define IVTV_STREAMS_H
+
int ivtv_streams_setup(struct ivtv *itv);
void ivtv_streams_cleanup(struct ivtv *itv);
@@ -29,3 +32,5 @@ int ivtv_stop_v4l2_decode_stream(struct ivtv_stream *s, int flags, u64 pts);
void ivtv_stop_all_captures(struct ivtv *itv);
int ivtv_passthrough_mode(struct ivtv *itv, int enable);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-udma.c b/drivers/media/video/ivtv/ivtv-udma.c
index bd642e1aafc..c4626d1cdf4 100644
--- a/drivers/media/video/ivtv/ivtv-udma.c
+++ b/drivers/media/video/ivtv/ivtv-udma.c
@@ -21,7 +21,6 @@
*/
#include "ivtv-driver.h"
-#include "ivtv-streams.h"
#include "ivtv-udma.h"
void ivtv_udma_get_page_info(struct ivtv_dma_page_info *dma_page, unsigned long first, unsigned long size)
@@ -38,19 +37,37 @@ void ivtv_udma_get_page_info(struct ivtv_dma_page_info *dma_page, unsigned long
int ivtv_udma_fill_sg_list (struct ivtv_user_dma *dma, struct ivtv_dma_page_info *dma_page, int map_offset)
{
int i, offset;
+ unsigned long flags;
+
+ if (map_offset < 0)
+ return map_offset;
offset = dma_page->offset;
/* Fill SG Array with new values */
for (i = 0; i < dma_page->page_count; i++) {
- if (i == dma_page->page_count - 1) {
- dma->SGlist[map_offset].length = dma_page->tail;
+ unsigned int len = (i == dma_page->page_count - 1) ?
+ dma_page->tail : PAGE_SIZE - offset;
+
+ dma->SGlist[map_offset].length = len;
+ dma->SGlist[map_offset].offset = offset;
+ if (PageHighMem(dma->map[map_offset])) {
+ void *src;
+
+ if (dma->bouncemap[map_offset] == NULL)
+ dma->bouncemap[map_offset] = alloc_page(GFP_KERNEL);
+ if (dma->bouncemap[map_offset] == NULL)
+ return -1;
+ local_irq_save(flags);
+ src = kmap_atomic(dma->map[map_offset], KM_BOUNCE_READ) + offset;
+ memcpy(page_address(dma->bouncemap[map_offset]) + offset, src, len);
+ kunmap_atomic(src, KM_BOUNCE_READ);
+ local_irq_restore(flags);
+ dma->SGlist[map_offset].page = dma->bouncemap[map_offset];
}
else {
- dma->SGlist[map_offset].length = PAGE_SIZE - offset;
+ dma->SGlist[map_offset].page = dma->map[map_offset];
}
- dma->SGlist[map_offset].offset = offset;
- dma->SGlist[map_offset].page = dma->map[map_offset];
offset = 0;
map_offset++;
}
@@ -89,7 +106,7 @@ int ivtv_udma_setup(struct ivtv *itv, unsigned long ivtv_dest_addr,
{
struct ivtv_dma_page_info user_dma;
struct ivtv_user_dma *dma = &itv->udma;
- int err;
+ int i, err;
IVTV_DEBUG_DMA("ivtv_udma_setup, dst: 0x%08x\n", (unsigned int)ivtv_dest_addr);
@@ -123,7 +140,13 @@ int ivtv_udma_setup(struct ivtv *itv, unsigned long ivtv_dest_addr,
dma->page_count = user_dma.page_count;
/* Fill SG List with new values */
- ivtv_udma_fill_sg_list(dma, &user_dma, 0);
+ if (ivtv_udma_fill_sg_list(dma, &user_dma, 0) < 0) {
+ for (i = 0; i < dma->page_count; i++) {
+ put_page(dma->map[i]);
+ }
+ dma->page_count = 0;
+ return -ENOMEM;
+ }
/* Map SG List */
dma->SG_length = pci_map_sg(itv->dev, dma->SGlist, dma->page_count, PCI_DMA_TODEVICE);
@@ -166,6 +189,8 @@ void ivtv_udma_unmap(struct ivtv *itv)
void ivtv_udma_free(struct ivtv *itv)
{
+ int i;
+
/* Unmap SG Array */
if (itv->udma.SG_handle) {
pci_unmap_single(itv->dev, itv->udma.SG_handle,
@@ -176,6 +201,11 @@ void ivtv_udma_free(struct ivtv *itv)
if (itv->udma.SG_length) {
pci_unmap_sg(itv->dev, itv->udma.SGlist, itv->udma.page_count, PCI_DMA_TODEVICE);
}
+
+ for (i = 0; i < IVTV_DMA_SG_OSD_ENT; i++) {
+ if (itv->udma.bouncemap[i])
+ __free_page(itv->udma.bouncemap[i]);
+ }
}
void ivtv_udma_start(struct ivtv *itv)
diff --git a/drivers/media/video/ivtv/ivtv-udma.h b/drivers/media/video/ivtv/ivtv-udma.h
index e131bccedec..df727e23be0 100644
--- a/drivers/media/video/ivtv/ivtv-udma.h
+++ b/drivers/media/video/ivtv/ivtv-udma.h
@@ -18,6 +18,9 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_UDMA_H
+#define IVTV_UDMA_H
+
/* User DMA functions */
void ivtv_udma_get_page_info(struct ivtv_dma_page_info *dma_page, unsigned long first, unsigned long size);
int ivtv_udma_fill_sg_list(struct ivtv_user_dma *dma, struct ivtv_dma_page_info *dma_page, int map_offset);
@@ -41,3 +44,5 @@ static inline void ivtv_udma_sync_for_cpu(struct ivtv *itv)
pci_dma_sync_single_for_cpu((struct pci_dev *)itv->dev, itv->udma.SG_handle,
sizeof(itv->udma.SGarray), PCI_DMA_TODEVICE);
}
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c
index a7282a91bd9..c151bcf5519 100644
--- a/drivers/media/video/ivtv/ivtv-vbi.c
+++ b/drivers/media/video/ivtv/ivtv-vbi.c
@@ -18,10 +18,69 @@
*/
#include "ivtv-driver.h"
-#include "ivtv-video.h"
-#include "ivtv-vbi.h"
+#include "ivtv-i2c.h"
#include "ivtv-ioctl.h"
#include "ivtv-queue.h"
+#include "ivtv-vbi.h"
+
+static void ivtv_set_vps(struct ivtv *itv, int enabled)
+{
+ struct v4l2_sliced_vbi_data data;
+
+ if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT))
+ return;
+ data.id = V4L2_SLICED_VPS;
+ data.field = 0;
+ data.line = enabled ? 16 : 0;
+ data.data[2] = itv->vbi.vps_payload.data[0];
+ data.data[8] = itv->vbi.vps_payload.data[1];
+ data.data[9] = itv->vbi.vps_payload.data[2];
+ data.data[10] = itv->vbi.vps_payload.data[3];
+ data.data[11] = itv->vbi.vps_payload.data[4];
+ ivtv_saa7127(itv, VIDIOC_INT_S_VBI_DATA, &data);
+}
+
+static void ivtv_set_cc(struct ivtv *itv, int mode, const struct vbi_cc *cc)
+{
+ struct v4l2_sliced_vbi_data data;
+
+ if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT))
+ return;
+ data.id = V4L2_SLICED_CAPTION_525;
+ data.field = 0;
+ data.line = (mode & 1) ? 21 : 0;
+ data.data[0] = cc->odd[0];
+ data.data[1] = cc->odd[1];
+ ivtv_saa7127(itv, VIDIOC_INT_S_VBI_DATA, &data);
+ data.field = 1;
+ data.line = (mode & 2) ? 21 : 0;
+ data.data[0] = cc->even[0];
+ data.data[1] = cc->even[1];
+ ivtv_saa7127(itv, VIDIOC_INT_S_VBI_DATA, &data);
+}
+
+static void ivtv_set_wss(struct ivtv *itv, int enabled, int mode)
+{
+ struct v4l2_sliced_vbi_data data;
+
+ if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT))
+ return;
+ /* When using a 50 Hz system, always turn on the
+ wide screen signal with 4x3 ratio as the default.
+ Turning this signal on and off can confuse certain
+ TVs. As far as I can tell there is no reason not to
+ transmit this signal. */
+ if ((itv->std & V4L2_STD_625_50) && !enabled) {
+ enabled = 1;
+ mode = 0x08; /* 4x3 full format */
+ }
+ data.id = V4L2_SLICED_WSS_625;
+ data.field = 0;
+ data.line = enabled ? 23 : 0;
+ data.data[0] = mode & 0xff;
+ data.data[1] = (mode >> 8) & 0xff;
+ ivtv_saa7127(itv, VIDIOC_INT_S_VBI_DATA, &data);
+}
static int odd_parity(u8 c)
{
@@ -32,62 +91,50 @@ static int odd_parity(u8 c)
return c & 1;
}
-static void passthrough_vbi_data(struct ivtv *itv, int cnt)
+void ivtv_write_vbi(struct ivtv *itv, const struct v4l2_sliced_vbi_data *sliced, size_t cnt)
{
- int wss = 0;
- u8 cc[4] = { 0x80, 0x80, 0x80, 0x80 };
- u8 vps[13];
+ struct vbi_info *vi = &itv->vbi;
+ struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } };
int found_cc = 0;
- int found_wss = 0;
- int found_vps = 0;
- int cc_pos = itv->vbi.cc_pos;
- int i;
+ size_t i;
for (i = 0; i < cnt; i++) {
- struct v4l2_sliced_vbi_data *d = itv->vbi.sliced_dec_data + i;
+ const struct v4l2_sliced_vbi_data *d = sliced + i;
if (d->id == V4L2_SLICED_CAPTION_525 && d->line == 21) {
- found_cc = 1;
if (d->field) {
- cc[2] = d->data[0];
- cc[3] = d->data[1];
+ cc.even[0] = d->data[0];
+ cc.even[1] = d->data[1];
} else {
- cc[0] = d->data[0];
- cc[1] = d->data[1];
+ cc.odd[0] = d->data[0];
+ cc.odd[1] = d->data[1];
}
+ found_cc = 1;
}
else if (d->id == V4L2_SLICED_VPS && d->line == 16 && d->field == 0) {
- memcpy(vps, d->data, sizeof(vps));
- found_vps = 1;
+ struct vbi_vps vps;
+
+ vps.data[0] = d->data[2];
+ vps.data[1] = d->data[8];
+ vps.data[2] = d->data[9];
+ vps.data[3] = d->data[10];
+ vps.data[4] = d->data[11];
+ if (memcmp(&vps, &vi->vps_payload, sizeof(vps))) {
+ vi->vps_payload = vps;
+ set_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags);
+ }
}
else if (d->id == V4L2_SLICED_WSS_625 && d->line == 23 && d->field == 0) {
- wss = d->data[0] | d->data[1] << 8;
- found_wss = 1;
- }
- }
-
- if (itv->vbi.wss_found != found_wss || itv->vbi.wss != wss) {
- itv->vbi.wss = wss;
- itv->vbi.wss_found = found_wss;
- set_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags);
- }
+ int wss = d->data[0] | d->data[1] << 8;
- if (found_vps || itv->vbi.vps_found) {
- itv->vbi.vps[0] = vps[2];
- itv->vbi.vps[1] = vps[8];
- itv->vbi.vps[2] = vps[9];
- itv->vbi.vps[3] = vps[10];
- itv->vbi.vps[4] = vps[11];
- itv->vbi.vps_found = found_vps;
- set_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags);
+ if (vi->wss_payload != wss) {
+ vi->wss_payload = wss;
+ set_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags);
+ }
+ }
}
-
- if (found_cc && cc_pos < sizeof(itv->vbi.cc_data_even)) {
- itv->vbi.cc_data_odd[cc_pos] = cc[0];
- itv->vbi.cc_data_odd[cc_pos + 1] = cc[1];
- itv->vbi.cc_data_even[cc_pos] = cc[2];
- itv->vbi.cc_data_even[cc_pos + 1] = cc[3];
- itv->vbi.cc_pos = cc_pos + 2;
+ if (found_cc && vi->cc_payload_idx < sizeof(vi->cc_payload)) {
+ vi->cc_payload[vi->cc_payload_idx++] = cc;
set_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags);
}
}
@@ -163,8 +210,8 @@ static int ivtv_convert_ivtv_vbi(struct ivtv *itv, u8 *p)
linemask[1] = 0xf;
p += 4;
} else {
- /* unknown VBI data stream */
- return 0;
+ /* unknown VBI data, convert to empty VBI frame */
+ linemask[0] = linemask[1] = 0;
}
for (i = 0; i < 36; i++) {
int err = 0;
@@ -211,69 +258,6 @@ static int ivtv_convert_ivtv_vbi(struct ivtv *itv, u8 *p)
return line * sizeof(itv->vbi.sliced_dec_data[0]);
}
-ssize_t ivtv_write_vbi(struct ivtv *itv, const char __user *ubuf, size_t count)
-{
- /* Should be a __user pointer, but sparse doesn't parse this bit correctly. */
- const struct v4l2_sliced_vbi_data *p = (const struct v4l2_sliced_vbi_data *)ubuf;
- u8 cc[4] = { 0x80, 0x80, 0x80, 0x80 };
- int found_cc = 0;
- int cc_pos = itv->vbi.cc_pos;
-
- while (count >= sizeof(struct v4l2_sliced_vbi_data)) {
- switch (p->id) {
- case V4L2_SLICED_CAPTION_525:
- if (p->line == 21) {
- found_cc = 1;
- if (p->field) {
- cc[2] = p->data[0];
- cc[3] = p->data[1];
- } else {
- cc[0] = p->data[0];
- cc[1] = p->data[1];
- }
- }
- break;
-
- case V4L2_SLICED_VPS:
- if (p->line == 16 && p->field == 0) {
- itv->vbi.vps[0] = p->data[2];
- itv->vbi.vps[1] = p->data[8];
- itv->vbi.vps[2] = p->data[9];
- itv->vbi.vps[3] = p->data[10];
- itv->vbi.vps[4] = p->data[11];
- itv->vbi.vps_found = 1;
- set_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags);
- }
- break;
-
- case V4L2_SLICED_WSS_625:
- if (p->line == 23 && p->field == 0) {
- /* No lock needed for WSS */
- itv->vbi.wss = p->data[0] | (p->data[1] << 8);
- itv->vbi.wss_found = 1;
- set_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags);
- }
- break;
-
- default:
- break;
- }
- count -= sizeof(*p);
- p++;
- }
-
- if (found_cc && cc_pos < sizeof(itv->vbi.cc_data_even)) {
- itv->vbi.cc_data_odd[cc_pos] = cc[0];
- itv->vbi.cc_data_odd[cc_pos + 1] = cc[1];
- itv->vbi.cc_data_even[cc_pos] = cc[2];
- itv->vbi.cc_data_even[cc_pos + 1] = cc[3];
- itv->vbi.cc_pos = cc_pos + 2;
- set_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags);
- }
-
- return (const char __user *)p - ubuf;
-}
-
/* Compress raw VBI format, removes leading SAV codes and surplus space after the
field.
Returns new compressed size. */
@@ -422,108 +406,95 @@ void ivtv_process_vbi_data(struct ivtv *itv, struct ivtv_buffer *buf,
memcpy(buf->buf, itv->vbi.sliced_dec_data, cnt);
buf->bytesused = cnt;
- passthrough_vbi_data(itv, cnt / sizeof(itv->vbi.sliced_dec_data[0]));
+ ivtv_write_vbi(itv, itv->vbi.sliced_dec_data,
+ cnt / sizeof(itv->vbi.sliced_dec_data[0]));
return;
}
}
-void ivtv_disable_vbi(struct ivtv *itv)
+void ivtv_disable_cc(struct ivtv *itv)
{
- clear_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags);
- clear_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags);
+ struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } };
+
clear_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags);
- ivtv_set_wss(itv, 0, 0);
- ivtv_set_cc(itv, 0, 0, 0, 0, 0);
- ivtv_set_vps(itv, 0, 0, 0, 0, 0, 0);
- itv->vbi.vps_found = itv->vbi.wss_found = 0;
- itv->vbi.wss = 0;
- itv->vbi.cc_pos = 0;
+ ivtv_set_cc(itv, 0, &cc);
+ itv->vbi.cc_payload_idx = 0;
}
void ivtv_vbi_work_handler(struct ivtv *itv)
{
+ struct vbi_info *vi = &itv->vbi;
struct v4l2_sliced_vbi_data data;
+ struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } };
/* Lock */
if (itv->output_mode == OUT_PASSTHROUGH) {
- /* Note: currently only the saa7115 is used in a PVR350,
- so these commands are for now saa7115 specific. */
if (itv->is_50hz) {
data.id = V4L2_SLICED_WSS_625;
data.field = 0;
if (itv->video_dec_func(itv, VIDIOC_INT_G_VBI_DATA, &data) == 0) {
ivtv_set_wss(itv, 1, data.data[0] & 0xf);
- itv->vbi.wss_no_update = 0;
- } else if (itv->vbi.wss_no_update == 4) {
+ vi->wss_missing_cnt = 0;
+ } else if (vi->wss_missing_cnt == 4) {
ivtv_set_wss(itv, 1, 0x8); /* 4x3 full format */
} else {
- itv->vbi.wss_no_update++;
+ vi->wss_missing_cnt++;
}
}
else {
- u8 c1 = 0, c2 = 0, c3 = 0, c4 = 0;
int mode = 0;
data.id = V4L2_SLICED_CAPTION_525;
data.field = 0;
if (itv->video_dec_func(itv, VIDIOC_INT_G_VBI_DATA, &data) == 0) {
mode |= 1;
- c1 = data.data[0];
- c2 = data.data[1];
+ cc.odd[0] = data.data[0];
+ cc.odd[1] = data.data[1];
}
data.field = 1;
if (itv->video_dec_func(itv, VIDIOC_INT_G_VBI_DATA, &data) == 0) {
mode |= 2;
- c3 = data.data[0];
- c4 = data.data[1];
+ cc.even[0] = data.data[0];
+ cc.even[1] = data.data[1];
}
if (mode) {
- itv->vbi.cc_no_update = 0;
- ivtv_set_cc(itv, mode, c1, c2, c3, c4);
- } else if (itv->vbi.cc_no_update == 4) {
- ivtv_set_cc(itv, 0, 0, 0, 0, 0);
+ vi->cc_missing_cnt = 0;
+ ivtv_set_cc(itv, mode, &cc);
+ } else if (vi->cc_missing_cnt == 4) {
+ ivtv_set_cc(itv, 0, &cc);
} else {
- itv->vbi.cc_no_update++;
+ vi->cc_missing_cnt++;
}
}
return;
}
if (test_and_clear_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags)) {
- /* Lock */
- ivtv_set_wss(itv, itv->vbi.wss_found, itv->vbi.wss & 0xf);
+ ivtv_set_wss(itv, 1, vi->wss_payload & 0xf);
}
- if (test_and_clear_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags)) {
- if (itv->vbi.cc_pos == 0) {
- ivtv_set_cc(itv, 3, 0x80, 0x80, 0x80, 0x80);
+ if (test_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags)) {
+ if (vi->cc_payload_idx == 0) {
+ clear_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags);
+ ivtv_set_cc(itv, 3, &cc);
}
- while (itv->vbi.cc_pos) {
- u8 cc_odd0 = itv->vbi.cc_data_odd[0];
- u8 cc_odd1 = itv->vbi.cc_data_odd[1];
- u8 cc_even0 = itv->vbi.cc_data_even[0];
- u8 cc_even1 = itv->vbi.cc_data_even[1];
-
- memcpy(itv->vbi.cc_data_odd, itv->vbi.cc_data_odd + 2, sizeof(itv->vbi.cc_data_odd) - 2);
- memcpy(itv->vbi.cc_data_even, itv->vbi.cc_data_even + 2, sizeof(itv->vbi.cc_data_even) - 2);
- itv->vbi.cc_pos -= 2;
- if (itv->vbi.cc_pos && cc_odd0 == 0x80 && cc_odd1 == 0x80)
+ while (vi->cc_payload_idx) {
+ cc = vi->cc_payload[0];
+
+ memcpy(vi->cc_payload, vi->cc_payload + 1,
+ sizeof(vi->cc_payload) - sizeof(vi->cc_payload[0]));
+ vi->cc_payload_idx--;
+ if (vi->cc_payload_idx && cc.odd[0] == 0x80 && cc.odd[1] == 0x80)
continue;
- /* Send to Saa7127 */
- ivtv_set_cc(itv, 3, cc_odd0, cc_odd1, cc_even0, cc_even1);
- if (itv->vbi.cc_pos == 0)
- set_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags);
+ ivtv_set_cc(itv, 3, &cc);
break;
}
}
if (test_and_clear_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags)) {
- /* Lock */
- ivtv_set_vps(itv, itv->vbi.vps_found,
- itv->vbi.vps[0], itv->vbi.vps[1],
- itv->vbi.vps[2], itv->vbi.vps[3], itv->vbi.vps[4]);
+ ivtv_set_vps(itv, 1);
}
}
diff --git a/drivers/media/video/ivtv/ivtv-vbi.h b/drivers/media/video/ivtv/ivtv-vbi.h
index ec211b49702..970567b9194 100644
--- a/drivers/media/video/ivtv/ivtv-vbi.h
+++ b/drivers/media/video/ivtv/ivtv-vbi.h
@@ -17,10 +17,15 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-ssize_t ivtv_write_vbi(struct ivtv *itv, const char __user *ubuf, size_t count);
+#ifndef IVTV_VBI_H
+#define IVTV_VBI_H
+
+void ivtv_write_vbi(struct ivtv *itv, const struct v4l2_sliced_vbi_data *sliced, size_t count);
void ivtv_process_vbi_data(struct ivtv *itv, struct ivtv_buffer *buf,
u64 pts_stamp, int streamtype);
int ivtv_used_line(struct ivtv *itv, int line, int field);
-void ivtv_disable_vbi(struct ivtv *itv);
+void ivtv_disable_cc(struct ivtv *itv);
void ivtv_set_vbi(unsigned long arg);
void ivtv_vbi_work_handler(struct ivtv *itv);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h
index 85530a3cd36..d050de2a722 100644
--- a/drivers/media/video/ivtv/ivtv-version.h
+++ b/drivers/media/video/ivtv/ivtv-version.h
@@ -17,10 +17,15 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_VERSION_H
+#define IVTV_VERSION_H
+
#define IVTV_DRIVER_NAME "ivtv"
#define IVTV_DRIVER_VERSION_MAJOR 1
-#define IVTV_DRIVER_VERSION_MINOR 0
+#define IVTV_DRIVER_VERSION_MINOR 1
#define IVTV_DRIVER_VERSION_PATCHLEVEL 0
#define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
#define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL)
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-video.c b/drivers/media/video/ivtv/ivtv-video.c
deleted file mode 100644
index 5858b197d51..00000000000
--- a/drivers/media/video/ivtv/ivtv-video.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- saa7127 interface functions
- Copyright (C) 2004-2007 Hans Verkuil <hverkuil@xs4all.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include "ivtv-driver.h"
-#include "ivtv-video.h"
-#include "ivtv-i2c.h"
-#include "ivtv-gpio.h"
-#include "ivtv-cards.h"
-#include <media/upd64031a.h>
-#include <media/upd64083.h>
-
-void ivtv_set_vps(struct ivtv *itv, int enabled, u8 vps1, u8 vps2, u8 vps3,
- u8 vps4, u8 vps5)
-{
- struct v4l2_sliced_vbi_data data;
-
- if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT))
- return;
- data.id = V4L2_SLICED_VPS;
- data.field = 0;
- data.line = enabled ? 16 : 0;
- data.data[4] = vps1;
- data.data[10] = vps2;
- data.data[11] = vps3;
- data.data[12] = vps4;
- data.data[13] = vps5;
- ivtv_saa7127(itv, VIDIOC_INT_S_VBI_DATA, &data);
-}
-
-void ivtv_set_cc(struct ivtv *itv, int mode, u8 cc1, u8 cc2, u8 cc3, u8 cc4)
-{
- struct v4l2_sliced_vbi_data data;
-
- if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT))
- return;
- data.id = V4L2_SLICED_CAPTION_525;
- data.field = 0;
- data.line = (mode & 1) ? 21 : 0;
- data.data[0] = cc1;
- data.data[1] = cc2;
- ivtv_saa7127(itv, VIDIOC_INT_S_VBI_DATA, &data);
- data.field = 1;
- data.line = (mode & 2) ? 21 : 0;
- data.data[0] = cc3;
- data.data[1] = cc4;
- ivtv_saa7127(itv, VIDIOC_INT_S_VBI_DATA, &data);
-}
-
-void ivtv_set_wss(struct ivtv *itv, int enabled, int mode)
-{
- struct v4l2_sliced_vbi_data data;
-
- if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT))
- return;
- /* When using a 50 Hz system, always turn on the
- wide screen signal with 4x3 ratio as the default.
- Turning this signal on and off can confuse certain
- TVs. As far as I can tell there is no reason not to
- transmit this signal. */
- if ((itv->std & V4L2_STD_625_50) && !enabled) {
- enabled = 1;
- mode = 0x08; /* 4x3 full format */
- }
- data.id = V4L2_SLICED_WSS_625;
- data.field = 0;
- data.line = enabled ? 23 : 0;
- data.data[0] = mode & 0xff;
- data.data[1] = (mode >> 8) & 0xff;
- ivtv_saa7127(itv, VIDIOC_INT_S_VBI_DATA, &data);
-}
-
-void ivtv_video_set_io(struct ivtv *itv)
-{
- struct v4l2_routing route;
- int inp = itv->active_input;
- u32 type;
-
- route.input = itv->card->video_inputs[inp].video_input;
- route.output = 0;
- itv->video_dec_func(itv, VIDIOC_INT_S_VIDEO_ROUTING, &route);
-
- type = itv->card->video_inputs[inp].video_type;
-
- if (type == IVTV_CARD_INPUT_VID_TUNER) {
- route.input = 0; /* Tuner */
- } else if (type < IVTV_CARD_INPUT_COMPOSITE1) {
- route.input = 2; /* S-Video */
- } else {
- route.input = 1; /* Composite */
- }
-
- if (itv->card->hw_video & IVTV_HW_GPIO)
- ivtv_gpio(itv, VIDIOC_INT_S_VIDEO_ROUTING, &route);
-
- if (itv->card->hw_video & IVTV_HW_UPD64031A) {
- if (type == IVTV_CARD_INPUT_VID_TUNER ||
- type >= IVTV_CARD_INPUT_COMPOSITE1) {
- /* Composite: GR on, connect to 3DYCS */
- route.input = UPD64031A_GR_ON | UPD64031A_3DYCS_COMPOSITE;
- } else {
- /* S-Video: GR bypassed, turn it off */
- route.input = UPD64031A_GR_OFF | UPD64031A_3DYCS_DISABLE;
- }
- route.input |= itv->card->gr_config;
-
- ivtv_upd64031a(itv, VIDIOC_INT_S_VIDEO_ROUTING, &route);
- }
-
- if (itv->card->hw_video & IVTV_HW_UPD6408X) {
- route.input = UPD64083_YCS_MODE;
- if (type > IVTV_CARD_INPUT_VID_TUNER &&
- type < IVTV_CARD_INPUT_COMPOSITE1) {
- /* S-Video uses YCNR mode and internal Y-ADC, the upd64031a
- is not used. */
- route.input |= UPD64083_YCNR_MODE;
- }
- else if (itv->card->hw_video & IVTV_HW_UPD64031A) {
- /* Use upd64031a output for tuner and composite(CX23416GYC only) inputs */
- if ((type == IVTV_CARD_INPUT_VID_TUNER)||
- (itv->card->type == IVTV_CARD_CX23416GYC)) {
- route.input |= UPD64083_EXT_Y_ADC;
- }
- }
- ivtv_upd64083(itv, VIDIOC_INT_S_VIDEO_ROUTING, &route);
- }
-}
diff --git a/drivers/media/video/ivtv/ivtv-video.h b/drivers/media/video/ivtv/ivtv-video.h
deleted file mode 100644
index c8ade5d3c41..00000000000
--- a/drivers/media/video/ivtv/ivtv-video.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- saa7127 interface functions
- Copyright (C) 2004-2007 Hans Verkuil <hverkuil@xs4all.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-void ivtv_set_wss(struct ivtv *itv, int enabled, int mode);
-void ivtv_set_cc(struct ivtv *itv, int mode, u8 cc1, u8 cc2, u8 cc3, u8 cc4);
-void ivtv_set_vps(struct ivtv *itv, int enabled, u8 vps1, u8 vps2, u8 vps3,
- u8 vps4, u8 vps5);
-void ivtv_video_set_io(struct ivtv *itv);
diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c
index bcea09542e5..e2288f224ab 100644
--- a/drivers/media/video/ivtv/ivtv-yuv.c
+++ b/drivers/media/video/ivtv/ivtv-yuv.c
@@ -19,11 +19,16 @@
*/
#include "ivtv-driver.h"
-#include "ivtv-queue.h"
#include "ivtv-udma.h"
-#include "ivtv-irq.h"
#include "ivtv-yuv.h"
+const u32 yuv_offset[4] = {
+ IVTV_YUV_BUFFER_OFFSET,
+ IVTV_YUV_BUFFER_OFFSET_1,
+ IVTV_YUV_BUFFER_OFFSET_2,
+ IVTV_YUV_BUFFER_OFFSET_3
+};
+
static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma,
struct ivtv_dma_frame *args)
{
@@ -37,7 +42,7 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma,
int y_decode_height, uv_decode_height, y_size;
int frame = atomic_read(&itv->yuv_info.next_fill_frame);
- y_buffer_offset = IVTV_DEC_MEM_START + yuv_offset[frame];
+ y_buffer_offset = IVTV_DECODER_OFFSET + yuv_offset[frame];
uv_buffer_offset = y_buffer_offset + IVTV_YUV_BUFFER_UV_OFFSET;
y_decode_height = uv_decode_height = args->src.height + args->src.top;
@@ -83,7 +88,14 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma,
}
/* Fill & map SG List */
- ivtv_udma_fill_sg_list (dma, &uv_dma, ivtv_udma_fill_sg_list (dma, &y_dma, 0));
+ if (ivtv_udma_fill_sg_list (dma, &uv_dma, ivtv_udma_fill_sg_list (dma, &y_dma, 0)) < 0) {
+ IVTV_DEBUG_WARN("could not allocate bounce buffers for highmem userspace buffers\n");
+ for (i = 0; i < dma->page_count; i++) {
+ put_page(dma->map[i]);
+ }
+ dma->page_count = 0;
+ return -ENOMEM;
+ }
dma->SG_length = pci_map_sg(itv->dev, dma->SGlist, dma->page_count, PCI_DMA_TODEVICE);
/* Fill SG Array with new values */
@@ -94,7 +106,7 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma,
if (itv->yuv_info.blanking_dmaptr) {
dma->SGarray[dma->SG_length].size = cpu_to_le32(720*16);
dma->SGarray[dma->SG_length].src = cpu_to_le32(itv->yuv_info.blanking_dmaptr);
- dma->SGarray[dma->SG_length].dst = cpu_to_le32(IVTV_DEC_MEM_START + yuv_offset[frame]);
+ dma->SGarray[dma->SG_length].dst = cpu_to_le32(IVTV_DECODER_OFFSET + yuv_offset[frame]);
dma->SG_length++;
}
}
@@ -612,7 +624,6 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *wi
itv->yuv_info.v_filter_2 = v_filter_2;
}
- itv->yuv_info.frame_interlaced_last = itv->yuv_info.frame_interlaced;
}
/* Modify the supplied coordinate information to fit the visible osd area */
@@ -799,6 +810,7 @@ static u32 ivtv_yuv_window_setup (struct ivtv *itv, struct yuv_frame_info *windo
(itv->yuv_info.old_frame_info.src_y != window->src_y) ||
(itv->yuv_info.old_frame_info.pan_y != window->pan_y) ||
(itv->yuv_info.old_frame_info.vis_h != window->vis_h) ||
+ (itv->yuv_info.old_frame_info.lace_mode != window->lace_mode) ||
(itv->yuv_info.old_frame_info.interlaced_y != window->interlaced_y) ||
(itv->yuv_info.old_frame_info.interlaced_uv != window->interlaced_uv)) {
yuv_update |= IVTV_YUV_UPDATE_VERTICAL;
@@ -898,8 +910,21 @@ static void ivtv_yuv_init (struct ivtv *itv)
itv->yuv_info.decode_height = 480;
/* If no visible size set, assume full size */
- if (!itv->yuv_info.osd_vis_w) itv->yuv_info.osd_vis_w = 720 - itv->yuv_info.osd_x_offset;
- if (!itv->yuv_info.osd_vis_h) itv->yuv_info.osd_vis_h = itv->yuv_info.decode_height - itv->yuv_info.osd_y_offset;
+ if (!itv->yuv_info.osd_vis_w)
+ itv->yuv_info.osd_vis_w = 720 - itv->yuv_info.osd_x_offset;
+
+ if (!itv->yuv_info.osd_vis_h) {
+ itv->yuv_info.osd_vis_h = itv->yuv_info.decode_height - itv->yuv_info.osd_y_offset;
+ } else {
+ /* If output video standard has changed, requested height may
+ not be legal */
+ if (itv->yuv_info.osd_vis_h + itv->yuv_info.osd_y_offset > itv->yuv_info.decode_height) {
+ IVTV_DEBUG_WARN("Clipping yuv output - fb size (%d) exceeds video standard limit (%d)\n",
+ itv->yuv_info.osd_vis_h + itv->yuv_info.osd_y_offset,
+ itv->yuv_info.decode_height);
+ itv->yuv_info.osd_vis_h = itv->yuv_info.decode_height - itv->yuv_info.osd_y_offset;
+ }
+ }
/* We need a buffer for blanking when Y plane is offset - non-fatal if we can't get one */
itv->yuv_info.blanking_ptr = kzalloc(720*16,GFP_KERNEL);
@@ -927,6 +952,7 @@ int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args)
int rc = 0;
int got_sig = 0;
int frame, next_fill_frame, last_fill_frame;
+ int register_update = 0;
IVTV_DEBUG_INFO("yuv_prep_frame\n");
@@ -940,6 +966,7 @@ int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args)
/* Buffers are full - Overwrite the last frame */
next_fill_frame = frame;
frame = (frame - 1) & 3;
+ register_update = itv->yuv_info.new_frame_info[frame].update;
}
/* Take a snapshot of the yuv coordinate information */
@@ -955,6 +982,9 @@ int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args)
itv->yuv_info.new_frame_info[frame].tru_w = args->src_width;
itv->yuv_info.new_frame_info[frame].tru_h = args->src_height;
+ /* Snapshot field order */
+ itv->yuv_info.sync_field[frame] = itv->yuv_info.lace_sync_field;
+
/* Are we going to offset the Y plane */
if (args->src.height + args->src.top < 512-16)
itv->yuv_info.new_frame_info[frame].offset_y = 1;
@@ -970,6 +1000,7 @@ int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args)
itv->yuv_info.new_frame_info[frame].update = 0;
itv->yuv_info.new_frame_info[frame].interlaced_y = 0;
itv->yuv_info.new_frame_info[frame].interlaced_uv = 0;
+ itv->yuv_info.new_frame_info[frame].lace_mode = itv->yuv_info.lace_mode;
if (memcmp (&itv->yuv_info.old_frame_info_args, &itv->yuv_info.new_frame_info[frame],
sizeof (itv->yuv_info.new_frame_info[frame]))) {
@@ -978,6 +1009,14 @@ int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args)
/* IVTV_DEBUG_YUV ("Requesting register update for frame %d\n",frame); */
}
+ itv->yuv_info.new_frame_info[frame].update |= register_update;
+
+ /* Should this frame be delayed ? */
+ if (itv->yuv_info.sync_field[frame] != itv->yuv_info.sync_field[(frame - 1) & 3])
+ itv->yuv_info.field_delay[frame] = 1;
+ else
+ itv->yuv_info.field_delay[frame] = 0;
+
/* DMA the frame */
mutex_lock(&itv->udma.lock);
diff --git a/drivers/media/video/ivtv/ivtv-yuv.h b/drivers/media/video/ivtv/ivtv-yuv.h
index 88972d3f77c..f7215eeca01 100644
--- a/drivers/media/video/ivtv/ivtv-yuv.h
+++ b/drivers/media/video/ivtv/ivtv-yuv.h
@@ -18,7 +18,28 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifndef IVTV_YUV_H
+#define IVTV_YUV_H
+
+/* Buffers on hardware offsets */
+#define IVTV_YUV_BUFFER_OFFSET 0x001a8600 /* First YUV Buffer */
+#define IVTV_YUV_BUFFER_OFFSET_1 0x00240400 /* Second YUV Buffer */
+#define IVTV_YUV_BUFFER_OFFSET_2 0x002d8200 /* Third YUV Buffer */
+#define IVTV_YUV_BUFFER_OFFSET_3 0x00370000 /* Fourth YUV Buffer */
+#define IVTV_YUV_BUFFER_UV_OFFSET 0x65400 /* Offset to UV Buffer */
+
+/* Offset to filter table in firmware */
+#define IVTV_YUV_HORIZONTAL_FILTER_OFFSET 0x025d8
+#define IVTV_YUV_VERTICAL_FILTER_OFFSET 0x03358
+
+#define IVTV_YUV_UPDATE_HORIZONTAL 0x01
+#define IVTV_YUV_UPDATE_VERTICAL 0x02
+
+extern const u32 yuv_offset[4];
+
int ivtv_yuv_filter_check(struct ivtv *itv);
int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args);
void ivtv_yuv_close(struct ivtv *itv);
void ivtv_yuv_work_handler (struct ivtv *itv);
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
new file mode 100644
index 00000000000..9684048fe56
--- /dev/null
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -0,0 +1,1190 @@
+/*
+ On Screen Display cx23415 Framebuffer driver
+
+ This module presents the cx23415 OSD (onscreen display) framebuffer memory
+ as a standard Linux /dev/fb style framebuffer device. The framebuffer has
+ support for 8, 16 & 32 bpp packed pixel formats with alpha channel. In 16bpp
+ mode, there is a choice of a three color depths (12, 15 or 16 bits), but no
+ local alpha. The colorspace is selectable between rgb & yuv.
+ Depending on the TV standard configured in the ivtv module at load time,
+ the initial resolution is either 640x400 (NTSC) or 640x480 (PAL) at 8bpp.
+ Video timings are locked to ensure a vertical refresh rate of 50Hz (PAL)
+ or 59.94 (NTSC)
+
+ Copyright (c) 2003 Matt T. Yourst <yourst@yourst.com>
+
+ Derived from drivers/video/vesafb.c
+ Portions (c) 1998 Gerd Knorr <kraxel@goldbach.in-berlin.de>
+
+ 2.6 kernel port:
+ Copyright (C) 2004 Matthias Badaire
+
+ Copyright (C) 2004 Chris Kennedy <c@groovy.org>
+
+ Copyright (C) 2006 Ian Armstrong <ian@iarmst.demon.co.uk>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fb.h>
+#include <linux/ivtvfb.h>
+
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#include "ivtv-driver.h"
+#include "ivtv-udma.h"
+#include "ivtv-mailbox.h"
+
+/* card parameters */
+static int ivtvfb_card_id = -1;
+static int ivtvfb_debug = 0;
+static int osd_laced;
+static int osd_compat;
+static int osd_depth;
+static int osd_upper;
+static int osd_left;
+static int osd_yres;
+static int osd_xres;
+
+module_param(ivtvfb_card_id, int, 0444);
+module_param_named(debug,ivtvfb_debug, int, 0644);
+module_param(osd_laced, bool, 0444);
+module_param(osd_compat, bool, 0444);
+module_param(osd_depth, int, 0444);
+module_param(osd_upper, int, 0444);
+module_param(osd_left, int, 0444);
+module_param(osd_yres, int, 0444);
+module_param(osd_xres, int, 0444);
+
+MODULE_PARM_DESC(ivtvfb_card_id,
+ "Only use framebuffer of the specified ivtv card (0-31)\n"
+ "\t\t\tdefault -1: initialize all available framebuffers");
+
+MODULE_PARM_DESC(debug,
+ "Debug level (bitmask). Default: errors only\n"
+ "\t\t\t(debug = 3 gives full debugging)");
+
+MODULE_PARM_DESC(osd_compat,
+ "Compatibility mode - Display size is locked (use for old X drivers)\n"
+ "\t\t\t0=off\n"
+ "\t\t\t1=on\n"
+ "\t\t\tdefault off");
+
+/* Why upper, left, xres, yres, depth, laced ? To match terminology used
+ by fbset.
+ Why start at 1 for left & upper coordinate ? Because X doesn't allow 0 */
+
+MODULE_PARM_DESC(osd_laced,
+ "Interlaced mode\n"
+ "\t\t\t0=off\n"
+ "\t\t\t1=on\n"
+ "\t\t\tdefault off");
+
+MODULE_PARM_DESC(osd_depth,
+ "Bits per pixel - 8, 16, 32\n"
+ "\t\t\tdefault 8");
+
+MODULE_PARM_DESC(osd_upper,
+ "Vertical start position\n"
+ "\t\t\tdefault 0 (Centered)");
+
+MODULE_PARM_DESC(osd_left,
+ "Horizontal start position\n"
+ "\t\t\tdefault 0 (Centered)");
+
+MODULE_PARM_DESC(osd_yres,
+ "Display height\n"
+ "\t\t\tdefault 480 (PAL)\n"
+ "\t\t\t 400 (NTSC)");
+
+MODULE_PARM_DESC(osd_xres,
+ "Display width\n"
+ "\t\t\tdefault 640");
+
+MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil, John Harvey, Ian Armstrong");
+MODULE_LICENSE("GPL");
+
+/* --------------------------------------------------------------------- */
+
+#define IVTVFB_DBGFLG_WARN (1 << 0)
+#define IVTVFB_DBGFLG_INFO (1 << 1)
+
+#define IVTVFB_DEBUG(x, type, fmt, args...) \
+ do { \
+ if ((x) & ivtvfb_debug) \
+ printk(KERN_INFO "ivtvfb%d " type ": " fmt, itv->num , ## args); \
+ } while (0)
+#define IVTVFB_DEBUG_WARN(fmt, args...) IVTVFB_DEBUG(IVTVFB_DBGFLG_WARN, "warning", fmt , ## args)
+#define IVTVFB_DEBUG_INFO(fmt, args...) IVTVFB_DEBUG(IVTVFB_DBGFLG_INFO, "info", fmt , ## args)
+
+/* Standard kernel messages */
+#define IVTVFB_ERR(fmt, args...) printk(KERN_ERR "ivtvfb%d: " fmt, itv->num , ## args)
+#define IVTVFB_WARN(fmt, args...) printk(KERN_WARNING "ivtvfb%d: " fmt, itv->num , ## args)
+#define IVTVFB_INFO(fmt, args...) printk(KERN_INFO "ivtvfb%d: " fmt, itv->num , ## args)
+
+/* --------------------------------------------------------------------- */
+
+#define IVTV_OSD_MAX_WIDTH 720
+#define IVTV_OSD_MAX_HEIGHT 576
+
+#define IVTV_OSD_BPP_8 0x00
+#define IVTV_OSD_BPP_16_444 0x03
+#define IVTV_OSD_BPP_16_555 0x02
+#define IVTV_OSD_BPP_16_565 0x01
+#define IVTV_OSD_BPP_32 0x04
+
+struct osd_info {
+ /* Physical base address */
+ unsigned long video_pbase;
+ /* Relative base address (relative to start of decoder memory) */
+ u32 video_rbase;
+ /* Mapped base address */
+ volatile char __iomem *video_vbase;
+ /* Buffer size */
+ u32 video_buffer_size;
+
+#ifdef CONFIG_MTRR
+ /* video_base rounded down as required by hardware MTRRs */
+ unsigned long fb_start_aligned_physaddr;
+ /* video_base rounded up as required by hardware MTRRs */
+ unsigned long fb_end_aligned_physaddr;
+#endif
+
+ /* Current osd mode */
+ int osd_mode;
+
+ /* Store the buffer offset */
+ int set_osd_coords_x;
+ int set_osd_coords_y;
+
+ /* Current dimensions (NOT VISIBLE SIZE!) */
+ int display_width;
+ int display_height;
+ int display_byte_stride;
+
+ /* Current bits per pixel */
+ int bits_per_pixel;
+ int bytes_per_pixel;
+
+ /* Frame buffer stuff */
+ struct fb_info ivtvfb_info;
+ struct fb_var_screeninfo ivtvfb_defined;
+ struct fb_fix_screeninfo ivtvfb_fix;
+};
+
+struct ivtv_osd_coords {
+ unsigned long offset;
+ unsigned long max_offset;
+ int pixel_stride;
+ int lines;
+ int x;
+ int y;
+};
+
+/* --------------------------------------------------------------------- */
+
+/* ivtv API calls for framebuffer related support */
+
+static int ivtvfb_get_framebuffer(struct ivtv *itv, u32 *fbbase,
+ u32 *fblength)
+{
+ u32 data[CX2341X_MBOX_MAX_DATA];
+ int rc;
+
+ rc = ivtv_vapi_result(itv, data, CX2341X_OSD_GET_FRAMEBUFFER, 0);
+ *fbbase = data[0];
+ *fblength = data[1];
+ return rc;
+}
+
+static int ivtvfb_get_osd_coords(struct ivtv *itv,
+ struct ivtv_osd_coords *osd)
+{
+ struct osd_info *oi = itv->osd_info;
+ u32 data[CX2341X_MBOX_MAX_DATA];
+
+ ivtv_vapi_result(itv, data, CX2341X_OSD_GET_OSD_COORDS, 0);
+
+ osd->offset = data[0] - oi->video_rbase;
+ osd->max_offset = oi->display_width * oi->display_height * 4;
+ osd->pixel_stride = data[1];
+ osd->lines = data[2];
+ osd->x = data[3];
+ osd->y = data[4];
+ return 0;
+}
+
+static int ivtvfb_set_osd_coords(struct ivtv *itv, const struct ivtv_osd_coords *osd)
+{
+ struct osd_info *oi = itv->osd_info;
+
+ oi->display_width = osd->pixel_stride;
+ oi->display_byte_stride = osd->pixel_stride * oi->bytes_per_pixel;
+ oi->set_osd_coords_x += osd->x;
+ oi->set_osd_coords_y = osd->y;
+
+ return ivtv_vapi(itv, CX2341X_OSD_SET_OSD_COORDS, 5,
+ osd->offset + oi->video_rbase,
+ osd->pixel_stride,
+ osd->lines, osd->x, osd->y);
+}
+
+static int ivtvfb_set_display_window(struct ivtv *itv, struct v4l2_rect *ivtv_window)
+{
+ int osd_height_limit = itv->is_50hz ? 576 : 480;
+
+ /* Only fail if resolution too high, otherwise fudge the start coords. */
+ if ((ivtv_window->height > osd_height_limit) || (ivtv_window->width > IVTV_OSD_MAX_WIDTH))
+ return -EINVAL;
+
+ /* Ensure we don't exceed display limits */
+ if (ivtv_window->top + ivtv_window->height > osd_height_limit) {
+ IVTVFB_DEBUG_WARN("ivtv_ioctl_fb_set_display_window - Invalid height setting (%d, %d)\n",
+ ivtv_window->top, ivtv_window->height);
+ ivtv_window->top = osd_height_limit - ivtv_window->height;
+ }
+
+ if (ivtv_window->left + ivtv_window->width > IVTV_OSD_MAX_WIDTH) {
+ IVTVFB_DEBUG_WARN("ivtv_ioctl_fb_set_display_window - Invalid width setting (%d, %d)\n",
+ ivtv_window->left, ivtv_window->width);
+ ivtv_window->left = IVTV_OSD_MAX_WIDTH - ivtv_window->width;
+ }
+
+ /* Set the OSD origin */
+ write_reg((ivtv_window->top << 16) | ivtv_window->left, 0x02a04);
+
+ /* How much to display */
+ write_reg(((ivtv_window->top+ivtv_window->height) << 16) | (ivtv_window->left+ivtv_window->width), 0x02a08);
+
+ /* Pass this info back the yuv handler */
+ itv->yuv_info.osd_vis_w = ivtv_window->width;
+ itv->yuv_info.osd_vis_h = ivtv_window->height;
+ itv->yuv_info.osd_x_offset = ivtv_window->left;
+ itv->yuv_info.osd_y_offset = ivtv_window->top;
+
+ return 0;
+}
+
+static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv,
+ unsigned long ivtv_dest_addr, void __user *userbuf,
+ int size_in_bytes)
+{
+ DEFINE_WAIT(wait);
+ int ret = 0;
+ int got_sig = 0;
+
+ mutex_lock(&itv->udma.lock);
+ /* Map User DMA */
+ if (ivtv_udma_setup(itv, ivtv_dest_addr, userbuf, size_in_bytes) <= 0) {
+ mutex_unlock(&itv->udma.lock);
+ IVTVFB_WARN("ivtvfb_prep_dec_dma_to_device, "
+ "Error with get_user_pages: %d bytes, %d pages returned\n",
+ size_in_bytes, itv->udma.page_count);
+
+ /* get_user_pages must have failed completely */
+ return -EIO;
+ }
+
+ IVTVFB_DEBUG_INFO("ivtvfb_prep_dec_dma_to_device, %d bytes, %d pages\n",
+ size_in_bytes, itv->udma.page_count);
+
+ ivtv_udma_prepare(itv);
+ prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
+ /* if no UDMA is pending and no UDMA is in progress, then the DMA
+ is finished */
+ while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) {
+ /* don't interrupt if the DMA is in progress but break off
+ a still pending DMA. */
+ got_sig = signal_pending(current);
+ if (got_sig && test_and_clear_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags))
+ break;
+ got_sig = 0;
+ schedule();
+ }
+ finish_wait(&itv->dma_waitq, &wait);
+
+ /* Unmap Last DMA Xfer */
+ ivtv_udma_unmap(itv);
+ mutex_unlock(&itv->udma.lock);
+ if (got_sig) {
+ IVTV_DEBUG_INFO("User stopped OSD\n");
+ return -EINTR;
+ }
+
+ return ret;
+}
+
+static int ivtvfb_prep_frame(struct ivtv *itv, int cmd, void __user *source,
+ unsigned long dest_offset, int count)
+{
+ DEFINE_WAIT(wait);
+ struct osd_info *oi = itv->osd_info;
+
+ /* Nothing to do */
+ if (count == 0) {
+ IVTVFB_DEBUG_WARN("ivtvfb_prep_frame: Nothing to do. count = 0\n");
+ return -EINVAL;
+ }
+
+ /* Check Total FB Size */
+ if ((dest_offset + count) > oi->video_buffer_size) {
+ IVTVFB_WARN("ivtvfb_prep_frame: Overflowing the framebuffer %ld, only %d available\n",
+ dest_offset + count, oi->video_buffer_size);
+ return -E2BIG;
+ }
+
+ /* Not fatal, but will have undesirable results */
+ if ((unsigned long)source & 3)
+ IVTVFB_WARN("ivtvfb_prep_frame: Source address not 32 bit aligned (0x%08lx)\n",
+ (unsigned long)source);
+
+ if (dest_offset & 3)
+ IVTVFB_WARN("ivtvfb_prep_frame: Dest offset not 32 bit aligned (%ld)\n", dest_offset);
+
+ if (count & 3)
+ IVTVFB_WARN("ivtvfb_prep_frame: Count not a multiple of 4 (%d)\n", count);
+
+ /* Check Source */
+ if (!access_ok(VERIFY_READ, source + dest_offset, count)) {
+ IVTVFB_WARN("Invalid userspace pointer 0x%08lx\n",
+ (unsigned long)source);
+
+ IVTVFB_DEBUG_WARN("access_ok() failed for offset 0x%08lx source 0x%08lx count %d\n",
+ dest_offset, (unsigned long)source,
+ count);
+ return -EINVAL;
+ }
+
+ /* OSD Address to send DMA to */
+ dest_offset += IVTV_DECODER_OFFSET + oi->video_rbase;
+
+ /* Fill Buffers */
+ return ivtvfb_prep_dec_dma_to_device(itv, dest_offset, source, count);
+}
+
+static int ivtvfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
+{
+ DEFINE_WAIT(wait);
+ struct ivtv *itv = (struct ivtv *)info->par;
+ int rc = 0;
+
+ switch (cmd) {
+ case FBIOGET_VBLANK: {
+ struct fb_vblank vblank;
+ u32 trace;
+
+ vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT |
+ FB_VBLANK_HAVE_VSYNC;
+ trace = read_reg(0x028c0) >> 16;
+ if (itv->is_50hz && trace > 312) trace -= 312;
+ else if (itv->is_60hz && trace > 262) trace -= 262;
+ if (trace == 1) vblank.flags |= FB_VBLANK_VSYNCING;
+ vblank.count = itv->last_vsync_field;
+ vblank.vcount = trace;
+ vblank.hcount = 0;
+ if (copy_to_user((void __user *)arg, &vblank, sizeof(vblank)))
+ return -EFAULT;
+ return 0;
+ }
+
+ case FBIO_WAITFORVSYNC:
+ prepare_to_wait(&itv->vsync_waitq, &wait, TASK_INTERRUPTIBLE);
+ if (!schedule_timeout(msecs_to_jiffies(50))) rc = -ETIMEDOUT;
+ finish_wait(&itv->vsync_waitq, &wait);
+ return rc;
+
+ case IVTVFB_IOC_DMA_FRAME: {
+ struct ivtvfb_dma_frame args;
+
+ IVTVFB_DEBUG_INFO("IVTVFB_IOC_DMA_FRAME\n");
+ if (copy_from_user(&args, (void __user *)arg, sizeof(args)))
+ return -EFAULT;
+
+ return ivtvfb_prep_frame(itv, cmd, args.source, args.dest_offset, args.count);
+ }
+
+ default:
+ IVTVFB_DEBUG_INFO("Unknown ioctl %08x\n", cmd);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* Framebuffer device handling */
+
+static int ivtvfb_set_var(struct ivtv *itv, struct fb_var_screeninfo *var)
+{
+ struct osd_info *oi = itv->osd_info;
+ struct ivtv_osd_coords ivtv_osd;
+ struct v4l2_rect ivtv_window;
+ int osd_mode = -1;
+
+ IVTVFB_DEBUG_INFO("ivtvfb_set_var\n");
+
+ /* Select color space */
+ if (var->nonstd) /* YUV */
+ write_reg(read_reg(0x02a00) | 0x0002000, 0x02a00);
+ else /* RGB */
+ write_reg(read_reg(0x02a00) & ~0x0002000, 0x02a00);
+
+ /* Set the color mode */
+ switch (var->bits_per_pixel) {
+ case 8:
+ osd_mode = IVTV_OSD_BPP_8;
+ break;
+ case 32:
+ osd_mode = IVTV_OSD_BPP_32;
+ break;
+ case 16:
+ switch (var->green.length) {
+ case 4:
+ osd_mode = IVTV_OSD_BPP_16_444;
+ break;
+ case 5:
+ osd_mode = IVTV_OSD_BPP_16_555;
+ break;
+ case 6:
+ osd_mode = IVTV_OSD_BPP_16_565;
+ break;
+ default:
+ IVTVFB_DEBUG_WARN("ivtvfb_set_var - Invalid bpp\n");
+ }
+ break;
+ default:
+ IVTVFB_DEBUG_WARN("ivtvfb_set_var - Invalid bpp\n");
+ }
+
+ /* Change osd mode if needed.
+ Although rare, things can go wrong. The extra mode
+ change seems to help... */
+ if (osd_mode != -1 && osd_mode != oi->osd_mode) {
+ ivtv_vapi(itv, CX2341X_OSD_SET_PIXEL_FORMAT, 1, 0);
+ ivtv_vapi(itv, CX2341X_OSD_SET_PIXEL_FORMAT, 1, osd_mode);
+ oi->osd_mode = osd_mode;
+ }
+
+ oi->bits_per_pixel = var->bits_per_pixel;
+ oi->bytes_per_pixel = var->bits_per_pixel / 8;
+
+ /* Set the flicker filter */
+ switch (var->vmode & FB_VMODE_MASK) {
+ case FB_VMODE_NONINTERLACED: /* Filter on */
+ ivtv_vapi(itv, CX2341X_OSD_SET_FLICKER_STATE, 1, 1);
+ break;
+ case FB_VMODE_INTERLACED: /* Filter off */
+ ivtv_vapi(itv, CX2341X_OSD_SET_FLICKER_STATE, 1, 0);
+ break;
+ default:
+ IVTVFB_DEBUG_WARN("ivtvfb_set_var - Invalid video mode\n");
+ }
+
+ /* Read the current osd info */
+ ivtvfb_get_osd_coords(itv, &ivtv_osd);
+
+ /* Now set the OSD to the size we want */
+ ivtv_osd.pixel_stride = var->xres_virtual;
+ ivtv_osd.lines = var->yres_virtual;
+ ivtv_osd.x = 0;
+ ivtv_osd.y = 0;
+ ivtvfb_set_osd_coords(itv, &ivtv_osd);
+
+ /* Can't seem to find the right API combo for this.
+ Use another function which does what we need through direct register access. */
+ ivtv_window.width = var->xres;
+ ivtv_window.height = var->yres;
+
+ /* Minimum margin cannot be 0, as X won't allow such a mode */
+ if (!var->upper_margin) var->upper_margin++;
+ if (!var->left_margin) var->left_margin++;
+ ivtv_window.top = var->upper_margin - 1;
+ ivtv_window.left = var->left_margin - 1;
+
+ ivtvfb_set_display_window(itv, &ivtv_window);
+
+ /* Force update of yuv registers */
+ itv->yuv_info.yuv_forced_update = 1;
+
+ IVTVFB_DEBUG_INFO("Display size: %dx%d (virtual %dx%d) @ %dbpp\n",
+ var->xres, var->yres,
+ var->xres_virtual, var->yres_virtual,
+ var->bits_per_pixel);
+
+ IVTVFB_DEBUG_INFO("Display position: %d, %d\n",
+ var->left_margin, var->upper_margin);
+
+ IVTVFB_DEBUG_INFO("Display filter: %s\n",
+ (var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED ? "on" : "off");
+ IVTVFB_DEBUG_INFO("Color space: %s\n", var->nonstd ? "YUV" : "RGB");
+
+ return 0;
+}
+
+static int ivtvfb_get_fix(struct ivtv *itv, struct fb_fix_screeninfo *fix)
+{
+ struct osd_info *oi = itv->osd_info;
+
+ IVTVFB_DEBUG_INFO("ivtvfb_get_fix\n");
+ memset(fix, 0, sizeof(struct fb_fix_screeninfo));
+ strcpy(fix->id, "cx23415 TV out");
+ fix->smem_start = oi->video_pbase;
+ fix->smem_len = oi->video_buffer_size;
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->visual = (oi->bits_per_pixel == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
+ fix->ywrapstep = 0;
+ fix->line_length = oi->display_byte_stride;
+ fix->accel = FB_ACCEL_NONE;
+ return 0;
+}
+
+/* Check the requested display mode, returning -EINVAL if we can't
+ handle it. */
+
+static int _ivtvfb_check_var(struct fb_var_screeninfo *var, struct ivtv *itv)
+{
+ struct osd_info *oi = itv->osd_info;
+ int osd_height_limit;
+ u32 pixclock, hlimit, vlimit;
+
+ IVTVFB_DEBUG_INFO("ivtvfb_check_var\n");
+
+ /* Set base references for mode calcs. */
+ if (itv->is_50hz) {
+ pixclock = 84316;
+ hlimit = 776;
+ vlimit = 591;
+ osd_height_limit = 576;
+ }
+ else {
+ pixclock = 83926;
+ hlimit = 776;
+ vlimit = 495;
+ osd_height_limit = 480;
+ }
+
+ /* Check the bits per pixel */
+ if (osd_compat) {
+ if (var->bits_per_pixel != 32) {
+ IVTVFB_DEBUG_WARN("Invalid colour mode: %d\n", var->bits_per_pixel);
+ return -EINVAL;
+ }
+ }
+
+ if (var->bits_per_pixel == 8 || var->bits_per_pixel == 32) {
+ var->transp.offset = 24;
+ var->transp.length = 8;
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ }
+ else if (var->bits_per_pixel == 16) {
+ /* To find out the true mode, check green length */
+ switch (var->green.length) {
+ case 4:
+ var->red.offset = 8;
+ var->red.length = 4;
+ var->green.offset = 4;
+ var->green.length = 4;
+ var->blue.offset = 0;
+ var->blue.length = 4;
+ var->transp.offset = 12;
+ var->transp.length = 1;
+ break;
+ case 5:
+ var->red.offset = 10;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 5;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->transp.offset = 15;
+ var->transp.length = 1;
+ break;
+ default:
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+ }
+ }
+ else {
+ IVTVFB_DEBUG_WARN("Invalid colour mode: %d\n", var->bits_per_pixel);
+ return -EINVAL;
+ }
+
+ /* Check the resolution */
+ if (osd_compat) {
+ if (var->xres != oi->ivtvfb_defined.xres ||
+ var->yres != oi->ivtvfb_defined.yres ||
+ var->xres_virtual != oi->ivtvfb_defined.xres_virtual ||
+ var->yres_virtual != oi->ivtvfb_defined.yres_virtual) {
+ IVTVFB_DEBUG_WARN("Invalid resolution: %dx%d (virtual %dx%d)\n",
+ var->xres, var->yres, var->xres_virtual, var->yres_virtual);
+ return -EINVAL;
+ }
+ }
+ else {
+ if (var->xres > IVTV_OSD_MAX_WIDTH || var->yres > osd_height_limit) {
+ IVTVFB_DEBUG_WARN("Invalid resolution: %dx%d\n",
+ var->xres, var->yres);
+ return -EINVAL;
+ }
+
+ /* Max horizontal size is 1023 @ 32bpp, 2046 & 16bpp, 4092 @ 8bpp */
+ if (var->xres_virtual > 4095 / (var->bits_per_pixel / 8) ||
+ var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8) > oi->video_buffer_size ||
+ var->xres_virtual < var->xres ||
+ var->yres_virtual < var->yres) {
+ IVTVFB_DEBUG_WARN("Invalid virtual resolution: %dx%d\n",
+ var->xres_virtual, var->yres_virtual);
+ return -EINVAL;
+ }
+ }
+
+ /* Some extra checks if in 8 bit mode */
+ if (var->bits_per_pixel == 8) {
+ /* Width must be a multiple of 4 */
+ if (var->xres & 3) {
+ IVTVFB_DEBUG_WARN("Invalid resolution for 8bpp: %d\n", var->xres);
+ return -EINVAL;
+ }
+ if (var->xres_virtual & 3) {
+ IVTVFB_DEBUG_WARN("Invalid virtual resolution for 8bpp: %d)\n", var->xres_virtual);
+ return -EINVAL;
+ }
+ }
+ else if (var->bits_per_pixel == 16) {
+ /* Width must be a multiple of 2 */
+ if (var->xres & 1) {
+ IVTVFB_DEBUG_WARN("Invalid resolution for 16bpp: %d\n", var->xres);
+ return -EINVAL;
+ }
+ if (var->xres_virtual & 1) {
+ IVTVFB_DEBUG_WARN("Invalid virtual resolution for 16bpp: %d)\n", var->xres_virtual);
+ return -EINVAL;
+ }
+ }
+
+ /* Now check the offsets */
+ if (var->xoffset >= var->xres_virtual || var->yoffset >= var->yres_virtual) {
+ IVTVFB_DEBUG_WARN("Invalid offset: %d (%d) %d (%d)\n",
+ var->xoffset, var->xres_virtual, var->yoffset, var->yres_virtual);
+ return -EINVAL;
+ }
+
+ /* Check pixel format */
+ if (var->nonstd > 1) {
+ IVTVFB_DEBUG_WARN("Invalid nonstd % d\n", var->nonstd);
+ return -EINVAL;
+ }
+
+ /* Check video mode */
+ if (((var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED) &&
+ ((var->vmode & FB_VMODE_MASK) != FB_VMODE_INTERLACED)) {
+ IVTVFB_DEBUG_WARN("Invalid video mode: %d\n", var->vmode & FB_VMODE_MASK);
+ return -EINVAL;
+ }
+
+ /* Check the left & upper margins
+ If the margins are too large, just center the screen
+ (enforcing margins causes too many problems) */
+
+ if (var->left_margin + var->xres > IVTV_OSD_MAX_WIDTH + 1) {
+ var->left_margin = 1 + ((IVTV_OSD_MAX_WIDTH - var->xres) / 2);
+ }
+ if (var->upper_margin + var->yres > (itv->is_50hz ? 577 : 481)) {
+ var->upper_margin = 1 + (((itv->is_50hz ? 576 : 480) - var->yres) / 2);
+ }
+
+ /* Maintain overall 'size' for a constant refresh rate */
+ var->right_margin = hlimit - var->left_margin - var->xres;
+ var->lower_margin = vlimit - var->upper_margin - var->yres;
+
+ /* Fixed sync times */
+ var->hsync_len = 24;
+ var->vsync_len = 2;
+
+ /* Non-interlaced / interlaced mode is used to switch the OSD filter
+ on or off. Adjust the clock timings to maintain a constant
+ vertical refresh rate. */
+ if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED)
+ var->pixclock = pixclock / 2;
+ else
+ var->pixclock = pixclock;
+
+ IVTVFB_DEBUG_INFO("Display size: %dx%d (virtual %dx%d) @ %dbpp\n",
+ var->xres, var->yres,
+ var->xres_virtual, var->yres_virtual,
+ var->bits_per_pixel);
+
+ IVTVFB_DEBUG_INFO("Display position: %d, %d\n",
+ var->left_margin, var->upper_margin);
+
+ IVTVFB_DEBUG_INFO("Display filter: %s\n",
+ (var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED ? "on" : "off");
+ IVTVFB_DEBUG_INFO("Color space: %s\n", var->nonstd ? "YUV" : "RGB");
+ return 0;
+}
+
+static int ivtvfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct ivtv *itv = (struct ivtv *) info->par;
+ IVTVFB_DEBUG_INFO("ivtvfb_check_var\n");
+ return _ivtvfb_check_var(var, itv);
+}
+
+static int ivtvfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ u32 osd_pan_index;
+ struct ivtv *itv = (struct ivtv *) info->par;
+
+ osd_pan_index = (var->xoffset + (var->yoffset * var->xres_virtual))*var->bits_per_pixel/8;
+ write_reg(osd_pan_index, 0x02A0C);
+
+ /* Pass this info back the yuv handler */
+ itv->yuv_info.osd_x_pan = var->xoffset;
+ itv->yuv_info.osd_y_pan = var->yoffset;
+ /* Force update of yuv registers */
+ itv->yuv_info.yuv_forced_update = 1;
+ return 0;
+}
+
+static int ivtvfb_set_par(struct fb_info *info)
+{
+ int rc = 0;
+ struct ivtv *itv = (struct ivtv *) info->par;
+
+ IVTVFB_DEBUG_INFO("ivtvfb_set_par\n");
+
+ rc = ivtvfb_set_var(itv, &info->var);
+ ivtvfb_pan_display(&info->var, info);
+ ivtvfb_get_fix(itv, &info->fix);
+ return rc;
+}
+
+static int ivtvfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp,
+ struct fb_info *info)
+{
+ u32 color, *palette;
+ struct ivtv *itv = (struct ivtv *)info->par;
+
+ if (regno >= info->cmap.len)
+ return -EINVAL;
+
+ color = ((transp & 0xFF00) << 16) |((red & 0xFF00) << 8) | (green & 0xFF00) | ((blue & 0xFF00) >> 8);
+ if (info->var.bits_per_pixel <= 8) {
+ write_reg(regno, 0x02a30);
+ write_reg(color, 0x02a34);
+ return 0;
+ }
+ if (regno >= 16)
+ return -EINVAL;
+
+ palette = info->pseudo_palette;
+ if (info->var.bits_per_pixel == 16) {
+ switch (info->var.green.length) {
+ case 4:
+ color = ((red & 0xf000) >> 4) |
+ ((green & 0xf000) >> 8) |
+ ((blue & 0xf000) >> 12);
+ break;
+ case 5:
+ color = ((red & 0xf800) >> 1) |
+ ((green & 0xf800) >> 6) |
+ ((blue & 0xf800) >> 11);
+ break;
+ case 6:
+ color = (red & 0xf800 ) |
+ ((green & 0xfc00) >> 5) |
+ ((blue & 0xf800) >> 11);
+ break;
+ }
+ }
+ palette[regno] = color;
+ return 0;
+}
+
+/* We don't really support blanking. All this does is enable or
+ disable the OSD. */
+static int ivtvfb_blank(int blank_mode, struct fb_info *info)
+{
+ struct ivtv *itv = (struct ivtv *)info->par;
+
+ IVTVFB_DEBUG_INFO("Set blanking mode : %d\n", blank_mode);
+ switch (blank_mode) {
+ case FB_BLANK_UNBLANK:
+ ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 1);
+ break;
+ case FB_BLANK_NORMAL:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_POWERDOWN:
+ ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0);
+ break;
+ }
+ return 0;
+}
+
+static struct fb_ops ivtvfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = ivtvfb_check_var,
+ .fb_set_par = ivtvfb_set_par,
+ .fb_setcolreg = ivtvfb_setcolreg,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_cursor = NULL,
+ .fb_ioctl = ivtvfb_ioctl,
+ .fb_pan_display = ivtvfb_pan_display,
+ .fb_blank = ivtvfb_blank,
+};
+
+/* Initialization */
+
+
+/* Setup our initial video mode */
+static int ivtvfb_init_vidmode(struct ivtv *itv)
+{
+ struct osd_info *oi = itv->osd_info;
+ struct v4l2_rect start_window;
+ int max_height;
+
+ /* Color mode */
+
+ if (osd_compat) osd_depth = 32;
+ if (osd_depth != 8 && osd_depth != 16 && osd_depth != 32) osd_depth = 8;
+ oi->bits_per_pixel = osd_depth;
+ oi->bytes_per_pixel = oi->bits_per_pixel / 8;
+
+ /* Invalidate current osd mode to force a mode switch later */
+ oi->osd_mode = -1;
+
+ /* Horizontal size & position */
+
+ if (osd_xres > 720) osd_xres = 720;
+
+ /* Must be a multiple of 4 for 8bpp & 2 for 16bpp */
+ if (osd_depth == 8)
+ osd_xres &= ~3;
+ else if (osd_depth == 16)
+ osd_xres &= ~1;
+
+ if (osd_xres)
+ start_window.width = osd_xres;
+ else
+ start_window.width = osd_compat ? 720: 640;
+
+ /* Check horizontal start (osd_left). */
+ if (osd_left && osd_left + start_window.width > 721) {
+ IVTVFB_ERR("Invalid osd_left - assuming default\n");
+ osd_left = 0;
+ }
+
+ /* Hardware coords start at 0, user coords start at 1. */
+ osd_left--;
+
+ start_window.left = osd_left >= 0 ? osd_left : ((IVTV_OSD_MAX_WIDTH - start_window.width) / 2);
+
+ oi->display_byte_stride =
+ start_window.width * oi->bytes_per_pixel;
+
+ /* Vertical size & position */
+
+ max_height = itv->is_50hz ? 576 : 480;
+
+ if (osd_yres > max_height)
+ osd_yres = max_height;
+
+ if (osd_yres)
+ start_window.height = osd_yres;
+ else
+ start_window.height = osd_compat ? max_height : (itv->is_50hz ? 480 : 400);
+
+ /* Check vertical start (osd_upper). */
+ if (osd_upper + start_window.height > max_height + 1) {
+ IVTVFB_ERR("Invalid osd_upper - assuming default\n");
+ osd_upper = 0;
+ }
+
+ /* Hardware coords start at 0, user coords start at 1. */
+ osd_upper--;
+
+ start_window.top = osd_upper >= 0 ? osd_upper : ((max_height - start_window.height) / 2);
+
+ oi->display_width = start_window.width;
+ oi->display_height = start_window.height;
+
+ /* Generate a valid fb_var_screeninfo */
+
+ oi->ivtvfb_defined.xres = oi->display_width;
+ oi->ivtvfb_defined.yres = oi->display_height;
+ oi->ivtvfb_defined.xres_virtual = oi->display_width;
+ oi->ivtvfb_defined.yres_virtual = oi->display_height;
+ oi->ivtvfb_defined.bits_per_pixel = oi->bits_per_pixel;
+ oi->ivtvfb_defined.vmode = (osd_laced ? FB_VMODE_INTERLACED : FB_VMODE_NONINTERLACED);
+ oi->ivtvfb_defined.left_margin = start_window.left + 1;
+ oi->ivtvfb_defined.upper_margin = start_window.top + 1;
+ oi->ivtvfb_defined.accel_flags = FB_ACCEL_NONE;
+ oi->ivtvfb_defined.nonstd = 0;
+
+ /* We've filled in the most data, let the usual mode check
+ routine fill in the rest. */
+ _ivtvfb_check_var(&oi->ivtvfb_defined, itv);
+
+ /* Generate valid fb_fix_screeninfo */
+
+ ivtvfb_get_fix(itv, &oi->ivtvfb_fix);
+
+ /* Generate valid fb_info */
+
+ oi->ivtvfb_info.node = -1;
+ oi->ivtvfb_info.flags = FBINFO_FLAG_DEFAULT;
+ oi->ivtvfb_info.fbops = &ivtvfb_ops;
+ oi->ivtvfb_info.par = itv;
+ oi->ivtvfb_info.var = oi->ivtvfb_defined;
+ oi->ivtvfb_info.fix = oi->ivtvfb_fix;
+ oi->ivtvfb_info.screen_base = (u8 __iomem *)oi->video_vbase;
+ oi->ivtvfb_info.fbops = &ivtvfb_ops;
+
+ /* Supply some monitor specs. Bogus values will do for now */
+ oi->ivtvfb_info.monspecs.hfmin = 8000;
+ oi->ivtvfb_info.monspecs.hfmax = 70000;
+ oi->ivtvfb_info.monspecs.vfmin = 10;
+ oi->ivtvfb_info.monspecs.vfmax = 100;
+
+ /* Allocate color map */
+ if (fb_alloc_cmap(&oi->ivtvfb_info.cmap, 256, 1)) {
+ IVTVFB_ERR("abort, unable to alloc cmap\n");
+ return -ENOMEM;
+ }
+
+ /* Allocate the pseudo palette */
+ oi->ivtvfb_info.pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
+
+ if (!oi->ivtvfb_info.pseudo_palette) {
+ IVTVFB_ERR("abort, unable to alloc pseudo pallete\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/* Find OSD buffer base & size. Add to mtrr. Zero osd buffer. */
+
+static int ivtvfb_init_io(struct ivtv *itv)
+{
+ struct osd_info *oi = itv->osd_info;
+
+ mutex_lock(&itv->serialize_lock);
+ if (ivtv_init_on_first_open(itv)) {
+ mutex_unlock(&itv->serialize_lock);
+ IVTVFB_ERR("Failed to initialize ivtv\n");
+ return -ENXIO;
+ }
+ mutex_unlock(&itv->serialize_lock);
+
+ ivtvfb_get_framebuffer(itv, &oi->video_rbase, &oi->video_buffer_size);
+
+ /* The osd buffer size depends on the number of video buffers allocated
+ on the PVR350 itself. For now we'll hardcode the smallest osd buffer
+ size to prevent any overlap. */
+ oi->video_buffer_size = 1704960;
+
+ oi->video_pbase = itv->base_addr + IVTV_DECODER_OFFSET + oi->video_rbase;
+ oi->video_vbase = itv->dec_mem + oi->video_rbase;
+
+ if (!oi->video_vbase) {
+ IVTVFB_ERR("abort, video memory 0x%x @ 0x%lx isn't mapped!\n",
+ oi->video_buffer_size, oi->video_pbase);
+ return -EIO;
+ }
+
+ IVTVFB_INFO("Framebuffer at 0x%lx, mapped to 0x%p, size %dk\n",
+ oi->video_pbase, oi->video_vbase,
+ oi->video_buffer_size / 1024);
+
+#ifdef CONFIG_MTRR
+ {
+ /* Find the largest power of two that maps the whole buffer */
+ int size_shift = 31;
+
+ while (!(oi->video_buffer_size & (1 << size_shift))) {
+ size_shift--;
+ }
+ size_shift++;
+ oi->fb_start_aligned_physaddr = oi->video_pbase & ~((1 << size_shift) - 1);
+ oi->fb_end_aligned_physaddr = oi->video_pbase + oi->video_buffer_size;
+ oi->fb_end_aligned_physaddr += (1 << size_shift) - 1;
+ oi->fb_end_aligned_physaddr &= ~((1 << size_shift) - 1);
+ if (mtrr_add(oi->fb_start_aligned_physaddr,
+ oi->fb_end_aligned_physaddr - oi->fb_start_aligned_physaddr,
+ MTRR_TYPE_WRCOMB, 1) < 0) {
+ IVTVFB_INFO("disabled mttr\n");
+ oi->fb_start_aligned_physaddr = 0;
+ oi->fb_end_aligned_physaddr = 0;
+ }
+ }
+#endif
+
+ /* Blank the entire osd. */
+ memset_io(oi->video_vbase, 0, oi->video_buffer_size);
+
+ return 0;
+}
+
+/* Release any memory we've grabbed & remove mtrr entry */
+static void ivtvfb_release_buffers (struct ivtv *itv)
+{
+ struct osd_info *oi = itv->osd_info;
+
+ /* Release cmap */
+ if (oi->ivtvfb_info.cmap.len)
+ fb_dealloc_cmap(&oi->ivtvfb_info.cmap);
+
+ /* Release pseudo palette */
+ if (oi->ivtvfb_info.pseudo_palette)
+ kfree(oi->ivtvfb_info.pseudo_palette);
+
+#ifdef CONFIG_MTRR
+ if (oi->fb_end_aligned_physaddr) {
+ mtrr_del(-1, oi->fb_start_aligned_physaddr,
+ oi->fb_end_aligned_physaddr - oi->fb_start_aligned_physaddr);
+ }
+#endif
+
+ kfree(oi);
+ itv->osd_info = NULL;
+}
+
+/* Initialize the specified card */
+
+static int ivtvfb_init_card(struct ivtv *itv)
+{
+ int rc;
+
+ if (itv->osd_info) {
+ IVTVFB_ERR("Card %d already initialised\n", ivtvfb_card_id);
+ return -EBUSY;
+ }
+
+ itv->osd_info = kzalloc(sizeof(struct osd_info), GFP_ATOMIC);
+ if (itv->osd_info == 0) {
+ IVTVFB_ERR("Failed to allocate memory for osd_info\n");
+ return -ENOMEM;
+ }
+
+ /* Find & setup the OSD buffer */
+ if ((rc = ivtvfb_init_io(itv)))
+ return rc;
+
+ /* Set the startup video mode information */
+ if ((rc = ivtvfb_init_vidmode(itv))) {
+ ivtvfb_release_buffers(itv);
+ return rc;
+ }
+
+ /* Register the framebuffer */
+ if (register_framebuffer(&itv->osd_info->ivtvfb_info) < 0) {
+ ivtvfb_release_buffers(itv);
+ return -EINVAL;
+ }
+
+ itv->osd_video_pbase = itv->osd_info->video_pbase;
+
+ /* Set the card to the requested mode */
+ ivtvfb_set_par(&itv->osd_info->ivtvfb_info);
+
+ /* Set color 0 to black */
+ write_reg(0, 0x02a30);
+ write_reg(0, 0x02a34);
+
+ /* Enable the osd */
+ ivtvfb_blank(FB_BLANK_UNBLANK, &itv->osd_info->ivtvfb_info);
+
+ /* Note if we're running in compatibility mode */
+ if (osd_compat)
+ IVTVFB_INFO("Running in compatibility mode. Display resize & mode change disabled\n");
+
+ /* Allocate DMA */
+ ivtv_udma_alloc(itv);
+ return 0;
+
+}
+
+static int __init ivtvfb_init(void)
+{
+ struct ivtv *itv;
+ int i, registered = 0;
+
+ if (ivtvfb_card_id < -1 || ivtvfb_card_id >= IVTV_MAX_CARDS) {
+ printk(KERN_ERR "ivtvfb: ivtvfb_card_id parameter is out of range (valid range: -1 - %d)\n",
+ IVTV_MAX_CARDS - 1);
+ return -EINVAL;
+ }
+
+ /* Locate & initialise all cards supporting an OSD. */
+ for (i = 0; i < ivtv_cards_active; i++) {
+ if (ivtvfb_card_id != -1 && i != ivtvfb_card_id)
+ continue;
+ itv = ivtv_cards[i];
+ if (itv && (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) {
+ if (ivtvfb_init_card(itv) == 0) {
+ IVTVFB_INFO("Framebuffer registered on ivtv card id %d\n", i);
+ registered++;
+ }
+ }
+ }
+ if (!registered) {
+ printk(KERN_ERR "ivtvfb: no cards found");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static void ivtvfb_cleanup(void)
+{
+ struct ivtv *itv;
+ int i;
+
+ printk(KERN_INFO "ivtvfb: Unloading framebuffer module\n");
+
+ for (i = 0; i < ivtv_cards_active; i++) {
+ itv = ivtv_cards[i];
+ if (itv && (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) && itv->osd_info) {
+ IVTVFB_DEBUG_INFO("Unregister framebuffer %d\n", i);
+ ivtvfb_blank(FB_BLANK_POWERDOWN, &itv->osd_info->ivtvfb_info);
+ unregister_framebuffer(&itv->osd_info->ivtvfb_info);
+ ivtvfb_release_buffers(itv);
+ itv->osd_video_pbase = 0;
+ }
+ }
+}
+
+module_init(ivtvfb_init);
+module_exit(ivtvfb_cleanup);
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index 11cfcf18ec3..c0c87e06259 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -244,17 +244,17 @@ int msp_write_dsp(struct i2c_client *client, int addr, int val)
* ----------------------------------------------------------------------- */
static int scarts[3][9] = {
- /* MASK IN1 IN2 IN3 IN4 IN1_DA IN2_DA MONO MUTE */
+ /* MASK IN1 IN2 IN3 IN4 IN1_DA IN2_DA MONO MUTE */
/* SCART DSP Input select */
- { 0x0320, 0x0000, 0x0200, 0x0300, 0x0020, -1, -1, 0x0100, 0x0320 },
+ { 0x0320, 0x0000, 0x0200, 0x0300, 0x0020, -1, -1, 0x0100, 0x0320 },
/* SCART1 Output select */
- { 0x0c40, 0x0440, 0x0400, 0x0000, 0x0840, 0x0c00, 0x0040, 0x0800, 0x0c40 },
+ { 0x0c40, 0x0440, 0x0400, 0x0000, 0x0840, 0x0c00, 0x0040, 0x0800, 0x0c40 },
/* SCART2 Output select */
- { 0x3080, 0x1000, 0x1080, 0x2080, 0x3080, 0x0000, 0x0080, 0x2000, 0x3000 },
+ { 0x3080, 0x1000, 0x1080, 0x2080, 0x3080, 0x0000, 0x0080, 0x2000, 0x3000 },
};
static char *scart_names[] = {
- "in1", "in2", "in3", "in4", "in1 da", "in2 da", "mono", "mute"
+ "in1", "in2", "in3", "in4", "in1 da", "in2 da", "mono", "mute"
};
void msp_set_scart(struct i2c_client *client, int in, int out)
@@ -813,8 +813,9 @@ static int msp_attach(struct i2c_adapter *adapter, int address, int kind)
int msp_rom;
client = kzalloc(sizeof(*client), GFP_KERNEL);
- if (client == NULL)
+ if (!client)
return -ENOMEM;
+
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver;
@@ -826,14 +827,14 @@ static int msp_attach(struct i2c_adapter *adapter, int address, int kind)
return 0;
}
- state = kmalloc(sizeof(*state), GFP_KERNEL);
- if (state == NULL) {
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (!state) {
kfree(client);
return -ENOMEM;
}
+
i2c_set_clientdata(client, state);
- memset(state, 0, sizeof(*state));
state->v4l2_std = V4L2_STD_NTSC;
state->audmode = V4L2_TUNER_MODE_STEREO;
state->volume = 58880; /* 0db gain */
diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c
index 7549114aaac..f49d1f4c40d 100644
--- a/drivers/media/video/mt20xx.c
+++ b/drivers/media/video/mt20xx.c
@@ -1,13 +1,20 @@
/*
- *
* i2c tv tuner chip device driver
* controls microtune tuners, mt2032 + mt2050 at the moment.
+ *
+ * This "mt20xx" module was split apart from the original "tuner" module.
*/
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/videodev.h>
-#include <linux/moduleparam.h>
-#include "tuner-driver.h"
+#include "tuner-i2c.h"
+#include "mt20xx.h"
+
+static int debug = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable verbose debug messages");
+
+#define PREFIX "mt20xx "
/* ---------------------------------------------------------------------- */
@@ -20,9 +27,6 @@ module_param(tv_antenna, int, 0644);
static unsigned int radio_antenna = 0;
module_param(radio_antenna, int, 0644);
-/* from tuner-core.c */
-extern int tuner_debug;
-
/* ---------------------------------------------------------------------- */
#define MT2032 0x04
@@ -38,23 +42,34 @@ static char *microtune_part[] = {
};
struct microtune_priv {
+ struct tuner_i2c_props i2c_props;
+
unsigned int xogc;
- unsigned int radio_if2;
+ //unsigned int radio_if2;
+
+ u32 frequency;
};
-static void microtune_release(struct i2c_client *c)
+static int microtune_release(struct dvb_frontend *fe)
{
- struct tuner *t = i2c_get_clientdata(c);
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
- kfree(t->priv);
- t->priv = NULL;
+ return 0;
+}
+
+static int microtune_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct microtune_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
}
// IsSpurInBand()?
-static int mt2032_spurcheck(struct i2c_client *c,
+static int mt2032_spurcheck(struct dvb_frontend *fe,
int f1, int f2, int spectrum_from,int spectrum_to)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct microtune_priv *priv = fe->tuner_priv;
int n1=1,n2,f;
f1=f1/1000; //scale to kHz to avoid 32bit overflows
@@ -82,7 +97,7 @@ static int mt2032_spurcheck(struct i2c_client *c,
return 1;
}
-static int mt2032_compute_freq(struct i2c_client *c,
+static int mt2032_compute_freq(struct dvb_frontend *fe,
unsigned int rfin,
unsigned int if1, unsigned int if2,
unsigned int spectrum_from,
@@ -91,7 +106,7 @@ static int mt2032_compute_freq(struct i2c_client *c,
int *ret_sel,
unsigned int xogc) //all in Hz
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct microtune_priv *priv = fe->tuner_priv;
unsigned int fref,lo1,lo1n,lo1a,s,sel,lo1freq, desired_lo1,
desired_lo2,lo2,lo2n,lo2a,lo2num,lo2freq;
@@ -141,7 +156,7 @@ static int mt2032_compute_freq(struct i2c_client *c,
return(-1);
}
- mt2032_spurcheck(c, lo1freq, desired_lo2, spectrum_from, spectrum_to);
+ mt2032_spurcheck(fe, lo1freq, desired_lo2, spectrum_from, spectrum_to);
// should recalculate lo1 (one step up/down)
// set up MT2032 register map for transfer over i2c
@@ -165,16 +180,16 @@ static int mt2032_compute_freq(struct i2c_client *c,
return 0;
}
-static int mt2032_check_lo_lock(struct i2c_client *c)
+static int mt2032_check_lo_lock(struct dvb_frontend *fe)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct microtune_priv *priv = fe->tuner_priv;
int try,lock=0;
unsigned char buf[2];
for(try=0;try<10;try++) {
buf[0]=0x0e;
- i2c_master_send(c,buf,1);
- i2c_master_recv(c,buf,1);
+ tuner_i2c_xfer_send(&priv->i2c_props,buf,1);
+ tuner_i2c_xfer_recv(&priv->i2c_props,buf,1);
tuner_dbg("mt2032 Reg.E=0x%02x\n",buf[0]);
lock=buf[0] &0x06;
@@ -187,15 +202,15 @@ static int mt2032_check_lo_lock(struct i2c_client *c)
return lock;
}
-static int mt2032_optimize_vco(struct i2c_client *c,int sel,int lock)
+static int mt2032_optimize_vco(struct dvb_frontend *fe,int sel,int lock)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct microtune_priv *priv = fe->tuner_priv;
unsigned char buf[2];
int tad1;
buf[0]=0x0f;
- i2c_master_send(c,buf,1);
- i2c_master_recv(c,buf,1);
+ tuner_i2c_xfer_send(&priv->i2c_props,buf,1);
+ tuner_i2c_xfer_recv(&priv->i2c_props,buf,1);
tuner_dbg("mt2032 Reg.F=0x%02x\n",buf[0]);
tad1=buf[0]&0x07;
@@ -218,58 +233,57 @@ static int mt2032_optimize_vco(struct i2c_client *c,int sel,int lock)
buf[0]=0x0f;
buf[1]=sel;
- i2c_master_send(c,buf,2);
- lock=mt2032_check_lo_lock(c);
+ tuner_i2c_xfer_send(&priv->i2c_props,buf,2);
+ lock=mt2032_check_lo_lock(fe);
return lock;
}
-static void mt2032_set_if_freq(struct i2c_client *c, unsigned int rfin,
+static void mt2032_set_if_freq(struct dvb_frontend *fe, unsigned int rfin,
unsigned int if1, unsigned int if2,
unsigned int from, unsigned int to)
{
unsigned char buf[21];
int lint_try,ret,sel,lock=0;
- struct tuner *t = i2c_get_clientdata(c);
- struct microtune_priv *priv = t->priv;
+ struct microtune_priv *priv = fe->tuner_priv;
tuner_dbg("mt2032_set_if_freq rfin=%d if1=%d if2=%d from=%d to=%d\n",
rfin,if1,if2,from,to);
buf[0]=0;
- ret=i2c_master_send(c,buf,1);
- i2c_master_recv(c,buf,21);
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,1);
+ tuner_i2c_xfer_recv(&priv->i2c_props,buf,21);
buf[0]=0;
- ret=mt2032_compute_freq(c,rfin,if1,if2,from,to,&buf[1],&sel,priv->xogc);
+ ret=mt2032_compute_freq(fe,rfin,if1,if2,from,to,&buf[1],&sel,priv->xogc);
if (ret<0)
return;
// send only the relevant registers per Rev. 1.2
buf[0]=0;
- ret=i2c_master_send(c,buf,4);
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,4);
buf[5]=5;
- ret=i2c_master_send(c,buf+5,4);
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf+5,4);
buf[11]=11;
- ret=i2c_master_send(c,buf+11,3);
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf+11,3);
if(ret!=3)
tuner_warn("i2c i/o error: rc == %d (should be 3)\n",ret);
// wait for PLLs to lock (per manual), retry LINT if not.
for(lint_try=0; lint_try<2; lint_try++) {
- lock=mt2032_check_lo_lock(c);
+ lock=mt2032_check_lo_lock(fe);
if(optimize_vco)
- lock=mt2032_optimize_vco(c,sel,lock);
+ lock=mt2032_optimize_vco(fe,sel,lock);
if(lock==6) break;
tuner_dbg("mt2032: re-init PLLs by LINT\n");
buf[0]=7;
buf[1]=0x80 +8+priv->xogc; // set LINT to re-init PLLs
- i2c_master_send(c,buf,2);
+ tuner_i2c_xfer_send(&priv->i2c_props,buf,2);
mdelay(10);
buf[1]=8+priv->xogc;
- i2c_master_send(c,buf,2);
+ tuner_i2c_xfer_send(&priv->i2c_props,buf,2);
}
if (lock!=6)
@@ -277,19 +291,19 @@ static void mt2032_set_if_freq(struct i2c_client *c, unsigned int rfin,
buf[0]=2;
buf[1]=0x20; // LOGC for optimal phase noise
- ret=i2c_master_send(c,buf,2);
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,2);
if (ret!=2)
tuner_warn("i2c i/o error: rc == %d (should be 2)\n",ret);
}
-static void mt2032_set_tv_freq(struct i2c_client *c, unsigned int freq)
+static int mt2032_set_tv_freq(struct dvb_frontend *fe,
+ struct analog_parameters *params)
{
- struct tuner *t = i2c_get_clientdata(c);
int if2,from,to;
// signal bandwidth and picture carrier
- if (t->std & V4L2_STD_525_60) {
+ if (params->std & V4L2_STD_525_60) {
// NTSC
from = 40750*1000;
to = 46750*1000;
@@ -301,32 +315,64 @@ static void mt2032_set_tv_freq(struct i2c_client *c, unsigned int freq)
if2 = 38900*1000;
}
- mt2032_set_if_freq(c, freq*62500 /* freq*1000*1000/16 */,
+ mt2032_set_if_freq(fe, params->frequency*62500,
1090*1000*1000, if2, from, to);
+
+ return 0;
}
-static void mt2032_set_radio_freq(struct i2c_client *c, unsigned int freq)
+static int mt2032_set_radio_freq(struct dvb_frontend *fe,
+ struct analog_parameters *params)
{
- struct tuner *t = i2c_get_clientdata(c);
- struct microtune_priv *priv = t->priv;
- int if2 = priv->radio_if2;
+ struct microtune_priv *priv = fe->tuner_priv;
+ int if2;
+
+ if (params->std & V4L2_STD_525_60) {
+ tuner_dbg("pinnacle ntsc\n");
+ if2 = 41300 * 1000;
+ } else {
+ tuner_dbg("pinnacle pal\n");
+ if2 = 33300 * 1000;
+ }
// per Manual for FM tuning: first if center freq. 1085 MHz
- mt2032_set_if_freq(c, freq * 1000 / 16,
- 1085*1000*1000,if2,if2,if2);
+ mt2032_set_if_freq(fe, params->frequency * 125 / 2,
+ 1085*1000*1000,if2,if2,if2);
+
+ return 0;
+}
+
+static int mt2032_set_params(struct dvb_frontend *fe,
+ struct analog_parameters *params)
+{
+ struct microtune_priv *priv = fe->tuner_priv;
+ int ret = -EINVAL;
+
+ switch (params->mode) {
+ case V4L2_TUNER_RADIO:
+ ret = mt2032_set_radio_freq(fe, params);
+ priv->frequency = params->frequency * 125 / 2;
+ break;
+ case V4L2_TUNER_ANALOG_TV:
+ case V4L2_TUNER_DIGITAL_TV:
+ ret = mt2032_set_tv_freq(fe, params);
+ priv->frequency = params->frequency * 62500;
+ break;
+ }
+
+ return ret;
}
-static struct tuner_operations mt2032_tuner_ops = {
- .set_tv_freq = mt2032_set_tv_freq,
- .set_radio_freq = mt2032_set_radio_freq,
- .release = microtune_release,
+static struct dvb_tuner_ops mt2032_tuner_ops = {
+ .set_analog_params = mt2032_set_params,
+ .release = microtune_release,
+ .get_frequency = microtune_get_frequency,
};
// Initalization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
-static int mt2032_init(struct i2c_client *c)
+static int mt2032_init(struct dvb_frontend *fe)
{
- struct tuner *t = i2c_get_clientdata(c);
- struct microtune_priv *priv = t->priv;
+ struct microtune_priv *priv = fe->tuner_priv;
unsigned char buf[21];
int ret,xogc,xok=0;
@@ -335,7 +381,7 @@ static int mt2032_init(struct i2c_client *c)
buf[2]=0xff;
buf[3]=0x0f;
buf[4]=0x1f;
- ret=i2c_master_send(c,buf+1,4);
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf+1,4);
buf[5]=6; // Index register 6
buf[6]=0xe4;
@@ -343,11 +389,11 @@ static int mt2032_init(struct i2c_client *c)
buf[8]=0xc3;
buf[9]=0x4e;
buf[10]=0xec;
- ret=i2c_master_send(c,buf+5,6);
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf+5,6);
buf[12]=13; // Index register 13
buf[13]=0x32;
- ret=i2c_master_send(c,buf+12,2);
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf+12,2);
// Adjust XOGC (register 7), wait for XOK
xogc=7;
@@ -355,8 +401,8 @@ static int mt2032_init(struct i2c_client *c)
tuner_dbg("mt2032: xogc = 0x%02x\n",xogc&0x07);
mdelay(10);
buf[0]=0x0e;
- i2c_master_send(c,buf,1);
- i2c_master_recv(c,buf,1);
+ tuner_i2c_xfer_send(&priv->i2c_props,buf,1);
+ tuner_i2c_xfer_recv(&priv->i2c_props,buf,1);
xok=buf[0]&0x01;
tuner_dbg("mt2032: xok = 0x%02x\n",xok);
if (xok == 1) break;
@@ -369,32 +415,32 @@ static int mt2032_init(struct i2c_client *c)
}
buf[0]=0x07;
buf[1]=0x88 + xogc;
- ret=i2c_master_send(c,buf,2);
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,2);
if (ret!=2)
tuner_warn("i2c i/o error: rc == %d (should be 2)\n",ret);
} while (xok != 1 );
priv->xogc=xogc;
- memcpy(&t->ops, &mt2032_tuner_ops, sizeof(struct tuner_operations));
+ memcpy(&fe->ops.tuner_ops, &mt2032_tuner_ops, sizeof(struct dvb_tuner_ops));
return(1);
}
-static void mt2050_set_antenna(struct i2c_client *c, unsigned char antenna)
+static void mt2050_set_antenna(struct dvb_frontend *fe, unsigned char antenna)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct microtune_priv *priv = fe->tuner_priv;
unsigned char buf[2];
int ret;
buf[0] = 6;
buf[1] = antenna ? 0x11 : 0x10;
- ret=i2c_master_send(c,buf,2);
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,2);
tuner_dbg("mt2050: enabled antenna connector %d\n", antenna);
}
-static void mt2050_set_if_freq(struct i2c_client *c,unsigned int freq, unsigned int if2)
+static void mt2050_set_if_freq(struct dvb_frontend *fe,unsigned int freq, unsigned int if2)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct microtune_priv *priv = fe->tuner_priv;
unsigned int if1=1218*1000*1000;
unsigned int f_lo1,f_lo2,lo1,lo2,f_lo1_modulo,f_lo2_modulo,num1,num2,div1a,div1b,div2a,div2b;
int ret;
@@ -426,7 +472,7 @@ static void mt2050_set_if_freq(struct i2c_client *c,unsigned int freq, unsigned
div2a=(lo2/8)-1;
div2b=lo2-(div2a+1)*8;
- if (tuner_debug > 1) {
+ if (debug > 1) {
tuner_dbg("lo1 lo2 = %d %d\n", lo1, lo2);
tuner_dbg("num1 num2 div1a div1b div2a div2b= %x %x %x %x %x %x\n",
num1,num2,div1a,div1b,div2a,div2b);
@@ -442,7 +488,7 @@ static void mt2050_set_if_freq(struct i2c_client *c,unsigned int freq, unsigned
buf[5]=div2a;
if(num2!=0) buf[5]=buf[5]|0x40;
- if (tuner_debug > 1) {
+ if (debug > 1) {
int i;
tuner_dbg("bufs is: ");
for(i=0;i<6;i++)
@@ -450,101 +496,131 @@ static void mt2050_set_if_freq(struct i2c_client *c,unsigned int freq, unsigned
printk("\n");
}
- ret=i2c_master_send(c,buf,6);
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,6);
if (ret!=6)
tuner_warn("i2c i/o error: rc == %d (should be 6)\n",ret);
}
-static void mt2050_set_tv_freq(struct i2c_client *c, unsigned int freq)
+static int mt2050_set_tv_freq(struct dvb_frontend *fe,
+ struct analog_parameters *params)
{
- struct tuner *t = i2c_get_clientdata(c);
unsigned int if2;
- if (t->std & V4L2_STD_525_60) {
+ if (params->std & V4L2_STD_525_60) {
// NTSC
if2 = 45750*1000;
} else {
// PAL
if2 = 38900*1000;
}
- if (V4L2_TUNER_DIGITAL_TV == t->mode) {
+ if (V4L2_TUNER_DIGITAL_TV == params->mode) {
// DVB (pinnacle 300i)
if2 = 36150*1000;
}
- mt2050_set_if_freq(c, freq*62500, if2);
- mt2050_set_antenna(c, tv_antenna);
+ mt2050_set_if_freq(fe, params->frequency*62500, if2);
+ mt2050_set_antenna(fe, tv_antenna);
+
+ return 0;
}
-static void mt2050_set_radio_freq(struct i2c_client *c, unsigned int freq)
+static int mt2050_set_radio_freq(struct dvb_frontend *fe,
+ struct analog_parameters *params)
{
- struct tuner *t = i2c_get_clientdata(c);
- struct microtune_priv *priv = t->priv;
- int if2 = priv->radio_if2;
+ struct microtune_priv *priv = fe->tuner_priv;
+ int if2;
+
+ if (params->std & V4L2_STD_525_60) {
+ tuner_dbg("pinnacle ntsc\n");
+ if2 = 41300 * 1000;
+ } else {
+ tuner_dbg("pinnacle pal\n");
+ if2 = 33300 * 1000;
+ }
- mt2050_set_if_freq(c, freq * 1000 / 16, if2);
- mt2050_set_antenna(c, radio_antenna);
+ mt2050_set_if_freq(fe, params->frequency * 125 / 2, if2);
+ mt2050_set_antenna(fe, radio_antenna);
+
+ return 0;
}
-static struct tuner_operations mt2050_tuner_ops = {
- .set_tv_freq = mt2050_set_tv_freq,
- .set_radio_freq = mt2050_set_radio_freq,
- .release = microtune_release,
+static int mt2050_set_params(struct dvb_frontend *fe,
+ struct analog_parameters *params)
+{
+ struct microtune_priv *priv = fe->tuner_priv;
+ int ret = -EINVAL;
+
+ switch (params->mode) {
+ case V4L2_TUNER_RADIO:
+ ret = mt2050_set_radio_freq(fe, params);
+ priv->frequency = params->frequency * 125 / 2;
+ break;
+ case V4L2_TUNER_ANALOG_TV:
+ case V4L2_TUNER_DIGITAL_TV:
+ ret = mt2050_set_tv_freq(fe, params);
+ priv->frequency = params->frequency * 62500;
+ break;
+ }
+
+ return ret;
+}
+
+static struct dvb_tuner_ops mt2050_tuner_ops = {
+ .set_analog_params = mt2050_set_params,
+ .release = microtune_release,
+ .get_frequency = microtune_get_frequency,
};
-static int mt2050_init(struct i2c_client *c)
+static int mt2050_init(struct dvb_frontend *fe)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct microtune_priv *priv = fe->tuner_priv;
unsigned char buf[2];
int ret;
buf[0]=6;
buf[1]=0x10;
- ret=i2c_master_send(c,buf,2); // power
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,2); // power
buf[0]=0x0f;
buf[1]=0x0f;
- ret=i2c_master_send(c,buf,2); // m1lo
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,2); // m1lo
buf[0]=0x0d;
- ret=i2c_master_send(c,buf,1);
- i2c_master_recv(c,buf,1);
+ ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,1);
+ tuner_i2c_xfer_recv(&priv->i2c_props,buf,1);
tuner_dbg("mt2050: sro is %x\n",buf[0]);
- memcpy(&t->ops, &mt2050_tuner_ops, sizeof(struct tuner_operations));
+ memcpy(&fe->ops.tuner_ops, &mt2050_tuner_ops, sizeof(struct dvb_tuner_ops));
return 0;
}
-int microtune_init(struct i2c_client *c)
+struct dvb_frontend *microtune_attach(struct dvb_frontend *fe,
+ struct i2c_adapter* i2c_adap,
+ u8 i2c_addr)
{
struct microtune_priv *priv = NULL;
- struct tuner *t = i2c_get_clientdata(c);
char *name;
unsigned char buf[21];
int company_code;
priv = kzalloc(sizeof(struct microtune_priv), GFP_KERNEL);
if (priv == NULL)
- return -ENOMEM;
- t->priv = priv;
+ return NULL;
+ fe->tuner_priv = priv;
+
+ priv->i2c_props.addr = i2c_addr;
+ priv->i2c_props.adap = i2c_adap;
- priv->radio_if2 = 10700 * 1000; /* 10.7MHz - FM radio */
+ //priv->radio_if2 = 10700 * 1000; /* 10.7MHz - FM radio */
memset(buf,0,sizeof(buf));
- if (t->std & V4L2_STD_525_60) {
- tuner_dbg("pinnacle ntsc\n");
- priv->radio_if2 = 41300 * 1000;
- } else {
- tuner_dbg("pinnacle pal\n");
- priv->radio_if2 = 33300 * 1000;
- }
name = "unknown";
- i2c_master_send(c,buf,1);
- i2c_master_recv(c,buf,21);
- if (tuner_debug) {
+ tuner_i2c_xfer_send(&priv->i2c_props,buf,1);
+ tuner_i2c_xfer_recv(&priv->i2c_props,buf,21);
+ if (debug) {
int i;
tuner_dbg("MT20xx hexdump:");
for(i=0;i<21;i++) {
@@ -563,10 +639,10 @@ int microtune_init(struct i2c_client *c)
name = microtune_part[buf[0x13]];
switch (buf[0x13]) {
case MT2032:
- mt2032_init(c);
+ mt2032_init(fe);
break;
case MT2050:
- mt2050_init(c);
+ mt2050_init(fe);
break;
default:
tuner_info("microtune %s found, not (yet?) supported, sorry :-/\n",
@@ -574,11 +650,18 @@ int microtune_init(struct i2c_client *c)
return 0;
}
- strlcpy(c->name, name, sizeof(c->name));
+ strlcpy(fe->ops.tuner_ops.info.name, name,
+ sizeof(fe->ops.tuner_ops.info.name));
tuner_info("microtune %s found, OK\n",name);
- return 0;
+ return fe;
}
+EXPORT_SYMBOL_GPL(microtune_attach);
+
+MODULE_DESCRIPTION("Microtune tuner driver");
+MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer");
+MODULE_LICENSE("GPL");
+
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* ---------------------------------------------------------------------------
diff --git a/drivers/media/video/mt20xx.h b/drivers/media/video/mt20xx.h
new file mode 100644
index 00000000000..5e9c825d2e9
--- /dev/null
+++ b/drivers/media/video/mt20xx.h
@@ -0,0 +1,37 @@
+/*
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MT20XX_H__
+#define __MT20XX_H__
+
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+
+#if defined(CONFIG_TUNER_MT20XX) || (defined(CONFIG_TUNER_MT20XX_MODULE) && defined(MODULE))
+extern struct dvb_frontend *microtune_attach(struct dvb_frontend *fe,
+ struct i2c_adapter* i2c_adap,
+ u8 i2c_addr);
+#else
+static inline struct dvb_frontend *microtune_attach(struct dvb_frontend *fe,
+ struct i2c_adapter* i2c_adap,
+ u8 i2c_addr)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif
+
+#endif /* __MT20XX_H__ */
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index 152cc6b3e15..98ad3092a07 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -153,7 +153,6 @@ static int mxb_probe(struct saa7146_dev* dev)
{
struct mxb* mxb = NULL;
struct i2c_client *client;
- struct list_head *item;
int result;
if ((result = request_module("saa7111")) < 0) {
@@ -196,8 +195,7 @@ static int mxb_probe(struct saa7146_dev* dev)
}
/* loop through all i2c-devices on the bus and look who is there */
- list_for_each(item,&mxb->i2c_adapter.clients) {
- client = list_entry(item, struct i2c_client, list);
+ list_for_each_entry(client, &mxb->i2c_adapter.clients, list) {
if( I2C_ADDR_TEA6420_1 == client->addr )
mxb->tea6420_1 = client;
if( I2C_ADDR_TEA6420_2 == client->addr )
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index e5edff1059a..9eb2562347a 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -5554,41 +5554,46 @@ error:
* sysfs
***************************************************************************/
-static inline struct usb_ov511 *cd_to_ov(struct class_device *cd)
+static inline struct usb_ov511 *cd_to_ov(struct device *cd)
{
struct video_device *vdev = to_video_device(cd);
return video_get_drvdata(vdev);
}
-static ssize_t show_custom_id(struct class_device *cd, char *buf)
+static ssize_t show_custom_id(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
return sprintf(buf, "%d\n", ov->customid);
}
-static CLASS_DEVICE_ATTR(custom_id, S_IRUGO, show_custom_id, NULL);
+static DEVICE_ATTR(custom_id, S_IRUGO, show_custom_id, NULL);
-static ssize_t show_model(struct class_device *cd, char *buf)
+static ssize_t show_model(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
return sprintf(buf, "%s\n", ov->desc);
}
-static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
+static DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
-static ssize_t show_bridge(struct class_device *cd, char *buf)
+static ssize_t show_bridge(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
return sprintf(buf, "%s\n", symbolic(brglist, ov->bridge));
}
-static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_bridge, NULL);
+static DEVICE_ATTR(bridge, S_IRUGO, show_bridge, NULL);
-static ssize_t show_sensor(struct class_device *cd, char *buf)
+static ssize_t show_sensor(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
return sprintf(buf, "%s\n", symbolic(senlist, ov->sensor));
}
-static CLASS_DEVICE_ATTR(sensor, S_IRUGO, show_sensor, NULL);
+static DEVICE_ATTR(sensor, S_IRUGO, show_sensor, NULL);
-static ssize_t show_brightness(struct class_device *cd, char *buf)
+static ssize_t show_brightness(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
unsigned short x;
@@ -5598,9 +5603,10 @@ static ssize_t show_brightness(struct class_device *cd, char *buf)
sensor_get_brightness(ov, &x);
return sprintf(buf, "%d\n", x >> 8);
}
-static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
+static DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
-static ssize_t show_saturation(struct class_device *cd, char *buf)
+static ssize_t show_saturation(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
unsigned short x;
@@ -5610,9 +5616,10 @@ static ssize_t show_saturation(struct class_device *cd, char *buf)
sensor_get_saturation(ov, &x);
return sprintf(buf, "%d\n", x >> 8);
}
-static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
+static DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
-static ssize_t show_contrast(struct class_device *cd, char *buf)
+static ssize_t show_contrast(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
unsigned short x;
@@ -5622,9 +5629,10 @@ static ssize_t show_contrast(struct class_device *cd, char *buf)
sensor_get_contrast(ov, &x);
return sprintf(buf, "%d\n", x >> 8);
}
-static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
+static DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
-static ssize_t show_hue(struct class_device *cd, char *buf)
+static ssize_t show_hue(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
unsigned short x;
@@ -5634,9 +5642,10 @@ static ssize_t show_hue(struct class_device *cd, char *buf)
sensor_get_hue(ov, &x);
return sprintf(buf, "%d\n", x >> 8);
}
-static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
+static DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
-static ssize_t show_exposure(struct class_device *cd, char *buf)
+static ssize_t show_exposure(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
unsigned char exp = 0;
@@ -5646,49 +5655,49 @@ static ssize_t show_exposure(struct class_device *cd, char *buf)
sensor_get_exposure(ov, &exp);
return sprintf(buf, "%d\n", exp >> 8);
}
-static CLASS_DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL);
+static DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL);
static int ov_create_sysfs(struct video_device *vdev)
{
int rc;
- rc = video_device_create_file(vdev, &class_device_attr_custom_id);
+ rc = video_device_create_file(vdev, &dev_attr_custom_id);
if (rc) goto err;
- rc = video_device_create_file(vdev, &class_device_attr_model);
+ rc = video_device_create_file(vdev, &dev_attr_model);
if (rc) goto err_id;
- rc = video_device_create_file(vdev, &class_device_attr_bridge);
+ rc = video_device_create_file(vdev, &dev_attr_bridge);
if (rc) goto err_model;
- rc = video_device_create_file(vdev, &class_device_attr_sensor);
+ rc = video_device_create_file(vdev, &dev_attr_sensor);
if (rc) goto err_bridge;
- rc = video_device_create_file(vdev, &class_device_attr_brightness);
+ rc = video_device_create_file(vdev, &dev_attr_brightness);
if (rc) goto err_sensor;
- rc = video_device_create_file(vdev, &class_device_attr_saturation);
+ rc = video_device_create_file(vdev, &dev_attr_saturation);
if (rc) goto err_bright;
- rc = video_device_create_file(vdev, &class_device_attr_contrast);
+ rc = video_device_create_file(vdev, &dev_attr_contrast);
if (rc) goto err_sat;
- rc = video_device_create_file(vdev, &class_device_attr_hue);
+ rc = video_device_create_file(vdev, &dev_attr_hue);
if (rc) goto err_contrast;
- rc = video_device_create_file(vdev, &class_device_attr_exposure);
+ rc = video_device_create_file(vdev, &dev_attr_exposure);
if (rc) goto err_hue;
return 0;
err_hue:
- video_device_remove_file(vdev, &class_device_attr_hue);
+ video_device_remove_file(vdev, &dev_attr_hue);
err_contrast:
- video_device_remove_file(vdev, &class_device_attr_contrast);
+ video_device_remove_file(vdev, &dev_attr_contrast);
err_sat:
- video_device_remove_file(vdev, &class_device_attr_saturation);
+ video_device_remove_file(vdev, &dev_attr_saturation);
err_bright:
- video_device_remove_file(vdev, &class_device_attr_brightness);
+ video_device_remove_file(vdev, &dev_attr_brightness);
err_sensor:
- video_device_remove_file(vdev, &class_device_attr_sensor);
+ video_device_remove_file(vdev, &dev_attr_sensor);
err_bridge:
- video_device_remove_file(vdev, &class_device_attr_bridge);
+ video_device_remove_file(vdev, &dev_attr_bridge);
err_model:
- video_device_remove_file(vdev, &class_device_attr_model);
+ video_device_remove_file(vdev, &dev_attr_model);
err_id:
- video_device_remove_file(vdev, &class_device_attr_custom_id);
+ video_device_remove_file(vdev, &dev_attr_custom_id);
err:
return rc;
}
diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c
index c4c5bd67f79..2bc6bdc9c1f 100644
--- a/drivers/media/video/ov7670.c
+++ b/drivers/media/video/ov7670.c
@@ -12,7 +12,6 @@
*/
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/videodev.h>
diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c
index 3fe9fa04cd8..8063e33f1c8 100644
--- a/drivers/media/video/ovcamchip/ovcamchip_core.c
+++ b/drivers/media/video/ovcamchip/ovcamchip_core.c
@@ -13,7 +13,6 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include "ovcamchip_priv.h"
diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c
index 4ab1af74a97..0ef73d9d584 100644
--- a/drivers/media/video/planb.c
+++ b/drivers/media/video/planb.c
@@ -844,21 +844,21 @@ cmd_tab_mask_end:
/*********************************/
static int palette2fmt[] = {
- 0,
- PLANB_GRAY,
- 0,
- 0,
- 0,
- PLANB_COLOUR32,
- PLANB_COLOUR15,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
+ 0,
+ PLANB_GRAY,
+ 0,
+ 0,
+ 0,
+ PLANB_COLOUR32,
+ PLANB_COLOUR15,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
};
#define PLANB_PALETTE_MAX 15
diff --git a/drivers/media/video/pvrusb2/pvrusb2-context.c b/drivers/media/video/pvrusb2/pvrusb2-context.c
index 6bbed88d786..22719ba861a 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-context.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-context.c
@@ -33,8 +33,10 @@ static void pvr2_context_destroy(struct pvr2_context *mp)
{
if (mp->hdw) pvr2_hdw_destroy(mp->hdw);
pvr2_trace(PVR2_TRACE_STRUCT,"Destroying pvr_main id=%p",mp);
- flush_workqueue(mp->workqueue);
- destroy_workqueue(mp->workqueue);
+ if (mp->workqueue) {
+ flush_workqueue(mp->workqueue);
+ destroy_workqueue(mp->workqueue);
+ }
kfree(mp);
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-debug.h b/drivers/media/video/pvrusb2/pvrusb2-debug.h
index d95a8588e4f..da6441b88f3 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-debug.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-debug.h
@@ -26,32 +26,33 @@ extern int pvrusb2_debug;
/* These are listed in *rough* order of decreasing usefulness and
increasing noise level. */
-#define PVR2_TRACE_INFO (1 << 0) // Normal messages
-#define PVR2_TRACE_ERROR_LEGS (1 << 1) // error messages
-#define PVR2_TRACE_TOLERANCE (1 << 2) // track tolerance-affected errors
-#define PVR2_TRACE_TRAP (1 << 3) // Trap & report misbehavior from app
-#define PVR2_TRACE_INIT (1 << 4) // misc initialization steps
-#define PVR2_TRACE_START_STOP (1 << 5) // Streaming start / stop
-#define PVR2_TRACE_CTL (1 << 6) // commit of control changes
-#define PVR2_TRACE_DEBUG (1 << 7) // Temporary debug code
-#define PVR2_TRACE_EEPROM (1 << 8) // eeprom parsing / report
-#define PVR2_TRACE_STRUCT (1 << 9) // internal struct creation
-#define PVR2_TRACE_OPEN_CLOSE (1 << 10) // application open / close
-#define PVR2_TRACE_CREG (1 << 11) // Main critical region entry / exit
-#define PVR2_TRACE_SYSFS (1 << 12) // Sysfs driven I/O
-#define PVR2_TRACE_FIRMWARE (1 << 13) // firmware upload actions
-#define PVR2_TRACE_CHIPS (1 << 14) // chip broadcast operation
-#define PVR2_TRACE_I2C (1 << 15) // I2C related stuff
-#define PVR2_TRACE_I2C_CMD (1 << 16) // Software commands to I2C modules
-#define PVR2_TRACE_I2C_CORE (1 << 17) // I2C core debugging
-#define PVR2_TRACE_I2C_TRAF (1 << 18) // I2C traffic through the adapter
-#define PVR2_TRACE_V4LIOCTL (1 << 19) // v4l ioctl details
-#define PVR2_TRACE_ENCODER (1 << 20) // mpeg2 encoder operation
-#define PVR2_TRACE_BUF_POOL (1 << 21) // Track buffer pool management
-#define PVR2_TRACE_BUF_FLOW (1 << 22) // Track buffer flow in system
-#define PVR2_TRACE_DATA_FLOW (1 << 23) // Track data flow
-#define PVR2_TRACE_DEBUGIFC (1 << 24) // Debug interface actions
-#define PVR2_TRACE_GPIO (1 << 25) // GPIO state bit changes
+#define PVR2_TRACE_INFO (1 << 0) /* Normal messages */
+#define PVR2_TRACE_ERROR_LEGS (1 << 1) /* error messages */
+#define PVR2_TRACE_TOLERANCE (1 << 2) /* track tolerance-affected errors */
+#define PVR2_TRACE_TRAP (1 << 3) /* Trap & report app misbehavior */
+#define PVR2_TRACE_STD (1 << 4) /* Log video standard stuff */
+#define PVR2_TRACE_INIT (1 << 5) /* misc initialization steps */
+#define PVR2_TRACE_START_STOP (1 << 6) /* Streaming start / stop */
+#define PVR2_TRACE_CTL (1 << 7) /* commit of control changes */
+#define PVR2_TRACE_DEBUG (1 << 8) /* Temporary debug code */
+#define PVR2_TRACE_EEPROM (1 << 9) /* eeprom parsing / report */
+#define PVR2_TRACE_STRUCT (1 << 10) /* internal struct creation */
+#define PVR2_TRACE_OPEN_CLOSE (1 << 11) /* application open / close */
+#define PVR2_TRACE_CREG (1 << 12) /* Main critical region entry / exit */
+#define PVR2_TRACE_SYSFS (1 << 13) /* Sysfs driven I/O */
+#define PVR2_TRACE_FIRMWARE (1 << 14) /* firmware upload actions */
+#define PVR2_TRACE_CHIPS (1 << 15) /* chip broadcast operation */
+#define PVR2_TRACE_I2C (1 << 16) /* I2C related stuff */
+#define PVR2_TRACE_I2C_CMD (1 << 17) /* Software commands to I2C modules */
+#define PVR2_TRACE_I2C_CORE (1 << 18) /* I2C core debugging */
+#define PVR2_TRACE_I2C_TRAF (1 << 19) /* I2C traffic through the adapter */
+#define PVR2_TRACE_V4LIOCTL (1 << 20) /* v4l ioctl details */
+#define PVR2_TRACE_ENCODER (1 << 21) /* mpeg2 encoder operation */
+#define PVR2_TRACE_BUF_POOL (1 << 22) /* Track buffer pool management */
+#define PVR2_TRACE_BUF_FLOW (1 << 23) /* Track buffer flow in system */
+#define PVR2_TRACE_DATA_FLOW (1 << 24) /* Track data flow */
+#define PVR2_TRACE_DEBUGIFC (1 << 25) /* Debug interface actions */
+#define PVR2_TRACE_GPIO (1 << 26) /* GPIO state bit changes */
#endif /* __PVRUSB2_HDW_INTERNAL_H */
diff --git a/drivers/media/video/pvrusb2/pvrusb2-debugifc.c b/drivers/media/video/pvrusb2/pvrusb2-debugifc.c
index e9da9bb8f8d..6f135f4a249 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-debugifc.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-debugifc.c
@@ -397,10 +397,22 @@ static int pvr2_debugifc_do1cmd(struct pvr2_hdw *hdw,const char *buf,
count -= scnt; buf += scnt;
if (!wptr) return -EINVAL;
if (debugifc_match_keyword(wptr,wlen,"fetch")) {
- pvr2_hdw_cpufw_set_enabled(hdw,!0);
+ scnt = debugifc_isolate_word(buf,count,&wptr,&wlen);
+ if (scnt && wptr) {
+ count -= scnt; buf += scnt;
+ if (debugifc_match_keyword(wptr,wlen,"prom")) {
+ pvr2_hdw_cpufw_set_enabled(hdw,!0,!0);
+ } else if (debugifc_match_keyword(wptr,wlen,
+ "ram")) {
+ pvr2_hdw_cpufw_set_enabled(hdw,0,!0);
+ } else {
+ return -EINVAL;
+ }
+ }
+ pvr2_hdw_cpufw_set_enabled(hdw,0,!0);
return 0;
} else if (debugifc_match_keyword(wptr,wlen,"done")) {
- pvr2_hdw_cpufw_set_enabled(hdw,0);
+ pvr2_hdw_cpufw_set_enabled(hdw,0,0);
return 0;
} else {
return -EINVAL;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
index ce66ab8ff2d..985d9ae7f5e 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
@@ -238,6 +238,7 @@ struct pvr2_hdw {
// CPU firmware info (used to help find / save firmware data)
char *fw_buffer;
unsigned int fw_size;
+ int fw_cpu_flag; /* True if we are dealing with the CPU */
// Which subsystem pieces have been enabled / configured
unsigned long subsys_enabled_mask;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 1311891e7ee..27b12b4b5c8 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -492,7 +492,7 @@ static int ctrl_cx2341x_get(struct pvr2_ctrl *cptr,int *vp)
cs.controls = &c1;
cs.count = 1;
c1.id = cptr->info->v4l_id;
- ret = cx2341x_ext_ctrls(&cptr->hdw->enc_ctl_state,&cs,
+ ret = cx2341x_ext_ctrls(&cptr->hdw->enc_ctl_state, 0, &cs,
VIDIOC_G_EXT_CTRLS);
if (ret) return ret;
*vp = c1.value;
@@ -510,7 +510,7 @@ static int ctrl_cx2341x_set(struct pvr2_ctrl *cptr,int m,int v)
cs.count = 1;
c1.id = cptr->info->v4l_id;
c1.value = v;
- ret = cx2341x_ext_ctrls(&cptr->hdw->enc_ctl_state,&cs,
+ ret = cx2341x_ext_ctrls(&cptr->hdw->enc_ctl_state, 0, &cs,
VIDIOC_S_EXT_CTRLS);
if (ret) return ret;
cptr->hdw->enc_stale = !0;
@@ -1143,6 +1143,13 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw)
fw_files_24xxx, ARRAY_SIZE(fw_files_24xxx)
},
};
+
+ if ((hdw->hdw_type >= ARRAY_SIZE(fw_file_defs)) ||
+ (!fw_file_defs[hdw->hdw_type].lst)) {
+ hdw->fw1_state = FW1_STATE_OK;
+ return 0;
+ }
+
hdw->fw1_state = FW1_STATE_FAILED; // default result
trace_firmware("pvr2_upload_firmware1");
@@ -1224,6 +1231,11 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw)
CX2341X_FIRM_ENC_FILENAME,
};
+ if ((hdw->hdw_type != PVR2_HDW_TYPE_29XXX) &&
+ (hdw->hdw_type != PVR2_HDW_TYPE_24XXX)) {
+ return 0;
+ }
+
trace_firmware("pvr2_upload_firmware2");
ret = pvr2_locate_firmware(hdw,&fw_entry,"encoder",
@@ -1682,6 +1694,44 @@ static int pvr2_hdw_check_firmware(struct pvr2_hdw *hdw)
return result == 0;
}
+struct pvr2_std_hack {
+ v4l2_std_id pat; /* Pattern to match */
+ v4l2_std_id msk; /* Which bits we care about */
+ v4l2_std_id std; /* What additional standards or default to set */
+};
+
+/* This data structure labels specific combinations of standards from
+ tveeprom that we'll try to recognize. If we recognize one, then assume
+ a specified default standard to use. This is here because tveeprom only
+ tells us about available standards not the intended default standard (if
+ any) for the device in question. We guess the default based on what has
+ been reported as available. Note that this is only for guessing a
+ default - which can always be overridden explicitly - and if the user
+ has otherwise named a default then that default will always be used in
+ place of this table. */
+const static struct pvr2_std_hack std_eeprom_maps[] = {
+ { /* PAL(B/G) */
+ .pat = V4L2_STD_B|V4L2_STD_GH,
+ .std = V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_PAL_G,
+ },
+ { /* NTSC(M) */
+ .pat = V4L2_STD_MN,
+ .std = V4L2_STD_NTSC_M,
+ },
+ { /* PAL(I) */
+ .pat = V4L2_STD_PAL_I,
+ .std = V4L2_STD_PAL_I,
+ },
+ { /* SECAM(L/L') */
+ .pat = V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC,
+ .std = V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC,
+ },
+ { /* PAL(D/D1/K) */
+ .pat = V4L2_STD_DK,
+ .std = V4L2_STD_PAL_D/V4L2_STD_PAL_D1|V4L2_STD_PAL_K,
+ },
+};
+
static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw)
{
char buf[40];
@@ -1691,7 +1741,7 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw)
std1 = get_default_standard(hdw);
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom);
- pvr2_trace(PVR2_TRACE_INIT,
+ pvr2_trace(PVR2_TRACE_STD,
"Supported video standard(s) reported by eeprom: %.*s",
bcnt,buf);
@@ -1700,7 +1750,7 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw)
std2 = std1 & ~hdw->std_mask_avail;
if (std2) {
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std2);
- pvr2_trace(PVR2_TRACE_INIT,
+ pvr2_trace(PVR2_TRACE_STD,
"Expanding supported video standards"
" to include: %.*s",
bcnt,buf);
@@ -1711,7 +1761,7 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw)
if (std1) {
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std1);
- pvr2_trace(PVR2_TRACE_INIT,
+ pvr2_trace(PVR2_TRACE_STD,
"Initial video standard forced to %.*s",
bcnt,buf);
hdw->std_mask_cur = std1;
@@ -1720,12 +1770,33 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw)
return;
}
+ {
+ unsigned int idx;
+ for (idx = 0; idx < ARRAY_SIZE(std_eeprom_maps); idx++) {
+ if (std_eeprom_maps[idx].msk ?
+ ((std_eeprom_maps[idx].pat ^
+ hdw->std_mask_eeprom) &
+ std_eeprom_maps[idx].msk) :
+ (std_eeprom_maps[idx].pat !=
+ hdw->std_mask_eeprom)) continue;
+ bcnt = pvr2_std_id_to_str(buf,sizeof(buf),
+ std_eeprom_maps[idx].std);
+ pvr2_trace(PVR2_TRACE_STD,
+ "Initial video standard guessed as %.*s",
+ bcnt,buf);
+ hdw->std_mask_cur = std_eeprom_maps[idx].std;
+ hdw->std_dirty = !0;
+ pvr2_hdw_internal_find_stdenum(hdw);
+ return;
+ }
+ }
+
if (hdw->std_enum_cnt > 1) {
// Autoselect the first listed standard
hdw->std_enum_cur = 1;
hdw->std_mask_cur = hdw->std_defs[hdw->std_enum_cur-1].id;
hdw->std_dirty = !0;
- pvr2_trace(PVR2_TRACE_INIT,
+ pvr2_trace(PVR2_TRACE_STD,
"Initial video standard auto-selected to %s",
hdw->std_defs[hdw->std_enum_cur-1].name);
return;
@@ -1742,29 +1813,35 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
unsigned int idx;
struct pvr2_ctrl *cptr;
int reloadFl = 0;
- if (!reloadFl) {
- reloadFl = (hdw->usb_intf->cur_altsetting->desc.bNumEndpoints
- == 0);
- if (reloadFl) {
- pvr2_trace(PVR2_TRACE_INIT,
- "USB endpoint config looks strange"
- "; possibly firmware needs to be loaded");
+ if ((hdw->hdw_type == PVR2_HDW_TYPE_29XXX) ||
+ (hdw->hdw_type == PVR2_HDW_TYPE_24XXX)) {
+ if (!reloadFl) {
+ reloadFl =
+ (hdw->usb_intf->cur_altsetting->desc.bNumEndpoints
+ == 0);
+ if (reloadFl) {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "USB endpoint config looks strange"
+ "; possibly firmware needs to be"
+ " loaded");
+ }
}
- }
- if (!reloadFl) {
- reloadFl = !pvr2_hdw_check_firmware(hdw);
- if (reloadFl) {
- pvr2_trace(PVR2_TRACE_INIT,
- "Check for FX2 firmware failed"
- "; possibly firmware needs to be loaded");
+ if (!reloadFl) {
+ reloadFl = !pvr2_hdw_check_firmware(hdw);
+ if (reloadFl) {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Check for FX2 firmware failed"
+ "; possibly firmware needs to be"
+ " loaded");
+ }
}
- }
- if (reloadFl) {
- if (pvr2_upload_firmware1(hdw) != 0) {
- pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Failure uploading firmware1");
+ if (reloadFl) {
+ if (pvr2_upload_firmware1(hdw) != 0) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Failure uploading firmware1");
+ }
+ return;
}
- return;
}
hdw->fw1_state = FW1_STATE_OK;
@@ -1773,17 +1850,25 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
}
if (!pvr2_hdw_dev_ok(hdw)) return;
- for (idx = 0; idx < pvr2_client_lists[hdw->hdw_type].cnt; idx++) {
- request_module(pvr2_client_lists[hdw->hdw_type].lst[idx]);
+ if (hdw->hdw_type < ARRAY_SIZE(pvr2_client_lists)) {
+ for (idx = 0;
+ idx < pvr2_client_lists[hdw->hdw_type].cnt;
+ idx++) {
+ request_module(
+ pvr2_client_lists[hdw->hdw_type].lst[idx]);
+ }
}
- pvr2_hdw_cmd_powerup(hdw);
- if (!pvr2_hdw_dev_ok(hdw)) return;
+ if ((hdw->hdw_type == PVR2_HDW_TYPE_29XXX) ||
+ (hdw->hdw_type == PVR2_HDW_TYPE_24XXX)) {
+ pvr2_hdw_cmd_powerup(hdw);
+ if (!pvr2_hdw_dev_ok(hdw)) return;
- if (pvr2_upload_firmware2(hdw)){
- pvr2_trace(PVR2_TRACE_ERROR_LEGS,"device unstable!!");
- pvr2_hdw_render_useless(hdw);
- return;
+ if (pvr2_upload_firmware2(hdw)){
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,"device unstable!!");
+ pvr2_hdw_render_useless(hdw);
+ return;
+ }
}
// This step MUST happen after the earlier powerup step.
@@ -2172,6 +2257,7 @@ static void pvr2_hdw_remove_usb_stuff(struct pvr2_hdw *hdw)
/* Destroy hardware interaction structure */
void pvr2_hdw_destroy(struct pvr2_hdw *hdw)
{
+ if (!hdw) return;
pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_destroy: hdw=%p",hdw);
if (hdw->fw_buffer) {
kfree(hdw->fw_buffer);
@@ -2478,7 +2564,7 @@ static int pvr2_hdw_commit_ctl_internal(struct pvr2_hdw *hdw)
cs.count = 1;
c1.id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ;
c1.value = hdw->srate_val;
- cx2341x_ext_ctrls(&hdw->enc_ctl_state,&cs,VIDIOC_S_EXT_CTRLS);
+ cx2341x_ext_ctrls(&hdw->enc_ctl_state, 0, &cs,VIDIOC_S_EXT_CTRLS);
}
/* Scan i2c core at this point - before we clear all the dirty
@@ -2604,7 +2690,85 @@ void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw)
} while (0); LOCK_GIVE(hdw->big_lock);
}
-void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw, int enable_flag)
+
+/* Grab EEPROM contents, needed for direct method. */
+#define EEPROM_SIZE 8192
+#define trace_eeprom(...) pvr2_trace(PVR2_TRACE_EEPROM,__VA_ARGS__)
+static u8 *pvr2_full_eeprom_fetch(struct pvr2_hdw *hdw)
+{
+ struct i2c_msg msg[2];
+ u8 *eeprom;
+ u8 iadd[2];
+ u8 addr;
+ u16 eepromSize;
+ unsigned int offs;
+ int ret;
+ int mode16 = 0;
+ unsigned pcnt,tcnt;
+ eeprom = kmalloc(EEPROM_SIZE,GFP_KERNEL);
+ if (!eeprom) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Failed to allocate memory"
+ " required to read eeprom");
+ return NULL;
+ }
+
+ trace_eeprom("Value for eeprom addr from controller was 0x%x",
+ hdw->eeprom_addr);
+ addr = hdw->eeprom_addr;
+ /* Seems that if the high bit is set, then the *real* eeprom
+ address is shifted right now bit position (noticed this in
+ newer PVR USB2 hardware) */
+ if (addr & 0x80) addr >>= 1;
+
+ /* FX2 documentation states that a 16bit-addressed eeprom is
+ expected if the I2C address is an odd number (yeah, this is
+ strange but it's what they do) */
+ mode16 = (addr & 1);
+ eepromSize = (mode16 ? EEPROM_SIZE : 256);
+ trace_eeprom("Examining %d byte eeprom at location 0x%x"
+ " using %d bit addressing",eepromSize,addr,
+ mode16 ? 16 : 8);
+
+ msg[0].addr = addr;
+ msg[0].flags = 0;
+ msg[0].len = mode16 ? 2 : 1;
+ msg[0].buf = iadd;
+ msg[1].addr = addr;
+ msg[1].flags = I2C_M_RD;
+
+ /* We have to do the actual eeprom data fetch ourselves, because
+ (1) we're only fetching part of the eeprom, and (2) if we were
+ getting the whole thing our I2C driver can't grab it in one
+ pass - which is what tveeprom is otherwise going to attempt */
+ memset(eeprom,0,EEPROM_SIZE);
+ for (tcnt = 0; tcnt < EEPROM_SIZE; tcnt += pcnt) {
+ pcnt = 16;
+ if (pcnt + tcnt > EEPROM_SIZE) pcnt = EEPROM_SIZE-tcnt;
+ offs = tcnt + (eepromSize - EEPROM_SIZE);
+ if (mode16) {
+ iadd[0] = offs >> 8;
+ iadd[1] = offs;
+ } else {
+ iadd[0] = offs;
+ }
+ msg[1].len = pcnt;
+ msg[1].buf = eeprom+tcnt;
+ if ((ret = i2c_transfer(&hdw->i2c_adap,
+ msg,ARRAY_SIZE(msg))) != 2) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "eeprom fetch set offs err=%d",ret);
+ kfree(eeprom);
+ return NULL;
+ }
+ }
+ return eeprom;
+}
+
+
+void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw,
+ int prom_flag,
+ int enable_flag)
{
int ret;
u16 address;
@@ -2618,37 +2782,59 @@ void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw, int enable_flag)
kfree(hdw->fw_buffer);
hdw->fw_buffer = NULL;
hdw->fw_size = 0;
- /* Now release the CPU. It will disconnect and
- reconnect later. */
- pvr2_hdw_cpureset_assert(hdw,0);
+ if (hdw->fw_cpu_flag) {
+ /* Now release the CPU. It will disconnect
+ and reconnect later. */
+ pvr2_hdw_cpureset_assert(hdw,0);
+ }
break;
}
- pvr2_trace(PVR2_TRACE_FIRMWARE,
- "Preparing to suck out CPU firmware");
- hdw->fw_size = 0x2000;
- hdw->fw_buffer = kzalloc(hdw->fw_size,GFP_KERNEL);
- if (!hdw->fw_buffer) {
- hdw->fw_size = 0;
- break;
- }
+ hdw->fw_cpu_flag = (prom_flag == 0);
+ if (hdw->fw_cpu_flag) {
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Preparing to suck out CPU firmware");
+ hdw->fw_size = 0x2000;
+ hdw->fw_buffer = kzalloc(hdw->fw_size,GFP_KERNEL);
+ if (!hdw->fw_buffer) {
+ hdw->fw_size = 0;
+ break;
+ }
- /* We have to hold the CPU during firmware upload. */
- pvr2_hdw_cpureset_assert(hdw,1);
+ /* We have to hold the CPU during firmware upload. */
+ pvr2_hdw_cpureset_assert(hdw,1);
- /* download the firmware from address 0000-1fff in 2048
- (=0x800) bytes chunk. */
+ /* download the firmware from address 0000-1fff in 2048
+ (=0x800) bytes chunk. */
- pvr2_trace(PVR2_TRACE_FIRMWARE,"Grabbing CPU firmware");
- pipe = usb_rcvctrlpipe(hdw->usb_dev, 0);
- for(address = 0; address < hdw->fw_size; address += 0x800) {
- ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0xc0,
- address,0,
- hdw->fw_buffer+address,0x800,HZ);
- if (ret < 0) break;
- }
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Grabbing CPU firmware");
+ pipe = usb_rcvctrlpipe(hdw->usb_dev, 0);
+ for(address = 0; address < hdw->fw_size;
+ address += 0x800) {
+ ret = usb_control_msg(hdw->usb_dev,pipe,
+ 0xa0,0xc0,
+ address,0,
+ hdw->fw_buffer+address,
+ 0x800,HZ);
+ if (ret < 0) break;
+ }
- pvr2_trace(PVR2_TRACE_FIRMWARE,"Done grabbing CPU firmware");
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Done grabbing CPU firmware");
+ } else {
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Sucking down EEPROM contents");
+ hdw->fw_buffer = pvr2_full_eeprom_fetch(hdw);
+ if (!hdw->fw_buffer) {
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "EEPROM content suck failed.");
+ break;
+ }
+ hdw->fw_size = EEPROM_SIZE;
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Done sucking down EEPROM contents");
+ }
} while (0); LOCK_GIVE(hdw->big_lock);
}
@@ -3272,7 +3458,6 @@ int pvr2_hdw_register_access(struct pvr2_hdw *hdw,
int setFl,u64 *val_ptr)
{
#ifdef CONFIG_VIDEO_ADV_DEBUG
- struct list_head *item;
struct pvr2_i2c_client *cp;
struct v4l2_register req;
int stat = 0;
@@ -3285,8 +3470,7 @@ int pvr2_hdw_register_access(struct pvr2_hdw *hdw,
req.reg = reg_id;
if (setFl) req.val = *val_ptr;
mutex_lock(&hdw->i2c_list_lock); do {
- list_for_each(item,&hdw->i2c_clients) {
- cp = list_entry(item,struct pvr2_i2c_client,list);
+ list_for_each_entry(cp, &hdw->i2c_clients, list) {
if (!v4l2_chip_match_i2c_client(
cp->client,
req.match_type, req.match_chip)) {
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
index 4dba8d00632..e2f9d5e4cb6 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
@@ -197,11 +197,13 @@ void pvr2_hdw_subsys_stream_bit_chg(struct pvr2_hdw *hdw,
unsigned long pvr2_hdw_subsys_stream_get(struct pvr2_hdw *);
-/* Enable / disable retrieval of CPU firmware. This must be enabled before
- pvr2_hdw_cpufw_get() will function. Note that doing this may prevent
- the device from running (and leaving this mode may imply a device
- reset). */
-void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *, int enable_flag);
+/* Enable / disable retrieval of CPU firmware or prom contents. This must
+ be enabled before pvr2_hdw_cpufw_get() will function. Note that doing
+ this may prevent the device from running (and leaving this mode may
+ imply a device reset). */
+void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *,
+ int prom_flag,
+ int enable_flag);
/* Return true if we're in a mode for retrieval CPU firmware */
int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
index 6786d3c0c98..898c9d2e4cd 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
@@ -389,10 +389,6 @@ static int pvr2_i2c_xfer(struct i2c_adapter *i2c_adap,
ret = -EINVAL;
goto done;
}
- if ((msgs[0].flags & I2C_M_NOSTART)) {
- trace_i2c("i2c refusing I2C_M_NOSTART");
- goto done;
- }
if (msgs[0].addr < PVR2_I2C_FUNC_CNT) {
funcp = hdw->i2c_func[msgs[0].addr];
}
@@ -494,14 +490,12 @@ static int pvr2_i2c_xfer(struct i2c_adapter *i2c_adap,
cnt = msgs[idx].len;
printk(KERN_INFO
"pvrusb2 i2c xfer %u/%u:"
- " addr=0x%x len=%d %s%s",
+ " addr=0x%x len=%d %s",
idx+1,num,
msgs[idx].addr,
cnt,
(msgs[idx].flags & I2C_M_RD ?
- "read" : "write"),
- (msgs[idx].flags & I2C_M_NOSTART ?
- " nostart" : ""));
+ "read" : "write"));
if ((ret > 0) || !(msgs[idx].flags & I2C_M_RD)) {
if (cnt > 8) cnt = 8;
printk(" [");
@@ -534,7 +528,7 @@ static int pvr2_i2c_control(struct i2c_adapter *adapter,
static u32 pvr2_i2c_functionality(struct i2c_adapter *adap)
{
- return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE_DATA;
+ return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
}
static int pvr2_i2c_core_singleton(struct i2c_client *cp,
@@ -576,15 +570,13 @@ int pvr2_i2c_client_cmd(struct pvr2_i2c_client *cp,unsigned int cmd,void *arg)
int pvr2_i2c_core_cmd(struct pvr2_hdw *hdw,unsigned int cmd,void *arg)
{
- struct list_head *item,*nc;
- struct pvr2_i2c_client *cp;
+ struct pvr2_i2c_client *cp, *ncp;
int stat = -EINVAL;
if (!hdw) return stat;
mutex_lock(&hdw->i2c_list_lock);
- list_for_each_safe(item,nc,&hdw->i2c_clients) {
- cp = list_entry(item,struct pvr2_i2c_client,list);
+ list_for_each_entry_safe(cp, ncp, &hdw->i2c_clients, list) {
if (!cp->recv_enable) continue;
mutex_unlock(&hdw->i2c_list_lock);
stat = pvr2_i2c_client_cmd(cp,cmd,arg);
@@ -608,13 +600,11 @@ static int handler_check(struct pvr2_i2c_client *cp)
void pvr2_i2c_core_status_poll(struct pvr2_hdw *hdw)
{
- struct list_head *item;
struct pvr2_i2c_client *cp;
mutex_lock(&hdw->i2c_list_lock); do {
struct v4l2_tuner *vtp = &hdw->tuner_signal_info;
memset(vtp,0,sizeof(*vtp));
- list_for_each(item,&hdw->i2c_clients) {
- cp = list_entry(item,struct pvr2_i2c_client,list);
+ list_for_each_entry(cp, &hdw->i2c_clients, list) {
if (!cp->detected_flag) continue;
if (!cp->status_poll) continue;
cp->status_poll(cp);
@@ -636,8 +626,7 @@ void pvr2_i2c_core_sync(struct pvr2_hdw *hdw)
{
unsigned long msk;
unsigned int idx;
- struct list_head *item,*nc;
- struct pvr2_i2c_client *cp;
+ struct pvr2_i2c_client *cp, *ncp;
if (!hdw->i2c_linked) return;
if (!(hdw->i2c_pend_types & PVR2_I2C_PEND_ALL)) {
@@ -655,9 +644,7 @@ void pvr2_i2c_core_sync(struct pvr2_hdw *hdw)
buf = kmalloc(BUFSIZE,GFP_KERNEL);
pvr2_trace(PVR2_TRACE_I2C_CORE,"i2c: PEND_DETECT");
hdw->i2c_pend_types &= ~PVR2_I2C_PEND_DETECT;
- list_for_each(item,&hdw->i2c_clients) {
- cp = list_entry(item,struct pvr2_i2c_client,
- list);
+ list_for_each_entry(cp, &hdw->i2c_clients, list) {
if (!cp->detected_flag) {
cp->ctl_mask = 0;
pvr2_i2c_probe(hdw,cp);
@@ -693,9 +680,7 @@ void pvr2_i2c_core_sync(struct pvr2_hdw *hdw)
"i2c: PEND_STALE (0x%lx)",
hdw->i2c_stale_mask);
hdw->i2c_pend_types &= ~PVR2_I2C_PEND_STALE;
- list_for_each(item,&hdw->i2c_clients) {
- cp = list_entry(item,struct pvr2_i2c_client,
- list);
+ list_for_each_entry(cp, &hdw->i2c_clients, list) {
m2 = hdw->i2c_stale_mask;
m2 &= cp->ctl_mask;
m2 &= ~cp->pend_mask;
@@ -716,9 +701,8 @@ void pvr2_i2c_core_sync(struct pvr2_hdw *hdw)
and update each one. */
pvr2_trace(PVR2_TRACE_I2C_CORE,"i2c: PEND_CLIENT");
hdw->i2c_pend_types &= ~PVR2_I2C_PEND_CLIENT;
- list_for_each_safe(item,nc,&hdw->i2c_clients) {
- cp = list_entry(item,struct pvr2_i2c_client,
- list);
+ list_for_each_entry_safe(cp, ncp, &hdw->i2c_clients,
+ list) {
if (!cp->handler) continue;
if (!cp->handler->func_table->update) continue;
pvr2_trace(PVR2_TRACE_I2C_CORE,
@@ -750,10 +734,8 @@ void pvr2_i2c_core_sync(struct pvr2_hdw *hdw)
for (idx = 0, msk = 1; pm; idx++, msk <<= 1) {
if (!(pm & msk)) continue;
pm &= ~msk;
- list_for_each(item,&hdw->i2c_clients) {
- cp = list_entry(item,
- struct pvr2_i2c_client,
- list);
+ list_for_each_entry(cp, &hdw->i2c_clients,
+ list) {
if (cp->pend_mask & msk) {
cp->pend_mask &= ~msk;
cp->recv_enable = !0;
@@ -777,7 +759,6 @@ int pvr2_i2c_core_check_stale(struct pvr2_hdw *hdw)
unsigned long msk,sm,pm;
unsigned int idx;
const struct pvr2_i2c_op *opf;
- struct list_head *item;
struct pvr2_i2c_client *cp;
unsigned int pt = 0;
@@ -796,11 +777,9 @@ int pvr2_i2c_core_check_stale(struct pvr2_hdw *hdw)
}
if (sm) pt |= PVR2_I2C_PEND_STALE;
- list_for_each(item,&hdw->i2c_clients) {
- cp = list_entry(item,struct pvr2_i2c_client,list);
- if (!handler_check(cp)) continue;
- pt |= PVR2_I2C_PEND_CLIENT;
- }
+ list_for_each_entry(cp, &hdw->i2c_clients, list)
+ if (handler_check(cp))
+ pt |= PVR2_I2C_PEND_CLIENT;
if (pt) {
mutex_lock(&hdw->i2c_list_lock); do {
@@ -888,12 +867,10 @@ unsigned int pvr2_i2c_report(struct pvr2_hdw *hdw,
char *buf,unsigned int maxlen)
{
unsigned int ccnt,bcnt;
- struct list_head *item;
struct pvr2_i2c_client *cp;
ccnt = 0;
mutex_lock(&hdw->i2c_list_lock); do {
- list_for_each(item,&hdw->i2c_clients) {
- cp = list_entry(item,struct pvr2_i2c_client,list);
+ list_for_each_entry(cp, &hdw->i2c_clients, list) {
bcnt = pvr2_i2c_client_describe(
cp,
(PVR2_I2C_DETAIL_HANDLER|
@@ -931,13 +908,11 @@ static int pvr2_i2c_attach_inform(struct i2c_client *client)
static int pvr2_i2c_detach_inform(struct i2c_client *client)
{
struct pvr2_hdw *hdw = (struct pvr2_hdw *)(client->adapter->algo_data);
- struct pvr2_i2c_client *cp;
- struct list_head *item,*nc;
+ struct pvr2_i2c_client *cp, *ncp;
unsigned long amask = 0;
int foundfl = 0;
mutex_lock(&hdw->i2c_list_lock); do {
- list_for_each_safe(item,nc,&hdw->i2c_clients) {
- cp = list_entry(item,struct pvr2_i2c_client,list);
+ list_for_each_entry_safe(cp, ncp, &hdw->i2c_clients, list) {
if (cp->client == client) {
trace_i2c("pvr2_i2c_detach"
" [client=%s @ 0x%x ctxt=%p]",
diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c
index 9ea41c6699b..ca9e2789c8c 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-main.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-main.c
@@ -24,7 +24,6 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/usb.h>
#include <linux/videodev2.h>
@@ -42,6 +41,7 @@
#define DEFAULT_DEBUG_MASK (PVR2_TRACE_ERROR_LEGS| \
PVR2_TRACE_INFO| \
+ PVR2_TRACE_STD| \
PVR2_TRACE_TOLERANCE| \
PVR2_TRACE_TRAP| \
0)
diff --git a/drivers/media/video/pvrusb2/pvrusb2-std.c b/drivers/media/video/pvrusb2/pvrusb2-std.c
index 81de26ba41d..63e55bb59fc 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-std.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-std.c
@@ -298,7 +298,7 @@ static int pvr2_std_fill(struct v4l2_standard *std,v4l2_std_id id)
std->id = id;
bcnt = pvr2_std_id_to_str(std->name,sizeof(std->name)-1,id);
std->name[bcnt] = 0;
- pvr2_trace(PVR2_TRACE_INIT,"Set up standard idx=%u name=%s",
+ pvr2_trace(PVR2_TRACE_STD,"Set up standard idx=%u name=%s",
std->index,std->name);
return !0;
}
@@ -320,11 +320,11 @@ struct v4l2_standard *pvr2_std_create_enum(unsigned int *countptr,
v4l2_std_id idmsk,cmsk,fmsk;
struct v4l2_standard *stddefs;
- if (pvrusb2_debug & PVR2_TRACE_INIT) {
+ if (pvrusb2_debug & PVR2_TRACE_STD) {
char buf[50];
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),id);
pvr2_trace(
- PVR2_TRACE_INIT,"Mapping standards mask=0x%x (%.*s)",
+ PVR2_TRACE_STD,"Mapping standards mask=0x%x (%.*s)",
(int)id,bcnt,buf);
}
@@ -355,7 +355,7 @@ struct v4l2_standard *pvr2_std_create_enum(unsigned int *countptr,
bcnt,buf);
}
- pvr2_trace(PVR2_TRACE_INIT,"Setting up %u unique standard(s)",
+ pvr2_trace(PVR2_TRACE_STD,"Setting up %u unique standard(s)",
std_cnt);
if (!std_cnt) return NULL; // paranoia
diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
index 7ab79baa1c8..7a78d6b3473 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
@@ -33,16 +33,16 @@
struct pvr2_sysfs {
struct pvr2_channel channel;
- struct class_device *class_dev;
+ struct device *class_dev;
#ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC
struct pvr2_sysfs_debugifc *debugifc;
#endif /* CONFIG_VIDEO_PVRUSB2_DEBUGIFC */
struct pvr2_sysfs_ctl_item *item_first;
struct pvr2_sysfs_ctl_item *item_last;
- struct class_device_attribute attr_v4l_minor_number;
- struct class_device_attribute attr_v4l_radio_minor_number;
- struct class_device_attribute attr_unit_number;
- struct class_device_attribute attr_bus_info;
+ struct device_attribute attr_v4l_minor_number;
+ struct device_attribute attr_v4l_radio_minor_number;
+ struct device_attribute attr_unit_number;
+ struct device_attribute attr_bus_info;
int v4l_minor_number_created_ok;
int v4l_radio_minor_number_created_ok;
int unit_number_created_ok;
@@ -51,22 +51,22 @@ struct pvr2_sysfs {
#ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC
struct pvr2_sysfs_debugifc {
- struct class_device_attribute attr_debugcmd;
- struct class_device_attribute attr_debuginfo;
+ struct device_attribute attr_debugcmd;
+ struct device_attribute attr_debuginfo;
int debugcmd_created_ok;
int debuginfo_created_ok;
};
#endif /* CONFIG_VIDEO_PVRUSB2_DEBUGIFC */
struct pvr2_sysfs_ctl_item {
- struct class_device_attribute attr_name;
- struct class_device_attribute attr_type;
- struct class_device_attribute attr_min;
- struct class_device_attribute attr_max;
- struct class_device_attribute attr_enum;
- struct class_device_attribute attr_bits;
- struct class_device_attribute attr_val;
- struct class_device_attribute attr_custom;
+ struct device_attribute attr_name;
+ struct device_attribute attr_type;
+ struct device_attribute attr_min;
+ struct device_attribute attr_max;
+ struct device_attribute attr_enum;
+ struct device_attribute attr_bits;
+ struct device_attribute attr_val;
+ struct device_attribute attr_custom;
struct pvr2_ctrl *cptr;
struct pvr2_sysfs *chptr;
struct pvr2_sysfs_ctl_item *item_next;
@@ -80,13 +80,13 @@ struct pvr2_sysfs_class {
struct class class;
};
-static ssize_t show_name(int id,struct class_device *class_dev,char *buf)
+static ssize_t show_name(int id,struct device *class_dev,char *buf)
{
struct pvr2_ctrl *cptr;
struct pvr2_sysfs *sfp;
const char *name;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
cptr = pvr2_hdw_get_ctrl_by_index(sfp->channel.hdw,id);
if (!cptr) return -EINVAL;
@@ -99,14 +99,14 @@ static ssize_t show_name(int id,struct class_device *class_dev,char *buf)
return scnprintf(buf,PAGE_SIZE,"%s\n",name);
}
-static ssize_t show_type(int id,struct class_device *class_dev,char *buf)
+static ssize_t show_type(int id,struct device *class_dev,char *buf)
{
struct pvr2_ctrl *cptr;
struct pvr2_sysfs *sfp;
const char *name;
enum pvr2_ctl_type tp;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
cptr = pvr2_hdw_get_ctrl_by_index(sfp->channel.hdw,id);
if (!cptr) return -EINVAL;
@@ -126,13 +126,13 @@ static ssize_t show_type(int id,struct class_device *class_dev,char *buf)
return scnprintf(buf,PAGE_SIZE,"%s\n",name);
}
-static ssize_t show_min(int id,struct class_device *class_dev,char *buf)
+static ssize_t show_min(int id,struct device *class_dev,char *buf)
{
struct pvr2_ctrl *cptr;
struct pvr2_sysfs *sfp;
long val;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
cptr = pvr2_hdw_get_ctrl_by_index(sfp->channel.hdw,id);
if (!cptr) return -EINVAL;
@@ -143,13 +143,13 @@ static ssize_t show_min(int id,struct class_device *class_dev,char *buf)
return scnprintf(buf,PAGE_SIZE,"%ld\n",val);
}
-static ssize_t show_max(int id,struct class_device *class_dev,char *buf)
+static ssize_t show_max(int id,struct device *class_dev,char *buf)
{
struct pvr2_ctrl *cptr;
struct pvr2_sysfs *sfp;
long val;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
cptr = pvr2_hdw_get_ctrl_by_index(sfp->channel.hdw,id);
if (!cptr) return -EINVAL;
@@ -160,14 +160,14 @@ static ssize_t show_max(int id,struct class_device *class_dev,char *buf)
return scnprintf(buf,PAGE_SIZE,"%ld\n",val);
}
-static ssize_t show_val_norm(int id,struct class_device *class_dev,char *buf)
+static ssize_t show_val_norm(int id,struct device *class_dev,char *buf)
{
struct pvr2_ctrl *cptr;
struct pvr2_sysfs *sfp;
int val,ret;
unsigned int cnt = 0;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
cptr = pvr2_hdw_get_ctrl_by_index(sfp->channel.hdw,id);
if (!cptr) return -EINVAL;
@@ -184,14 +184,14 @@ static ssize_t show_val_norm(int id,struct class_device *class_dev,char *buf)
return cnt+1;
}
-static ssize_t show_val_custom(int id,struct class_device *class_dev,char *buf)
+static ssize_t show_val_custom(int id,struct device *class_dev,char *buf)
{
struct pvr2_ctrl *cptr;
struct pvr2_sysfs *sfp;
int val,ret;
unsigned int cnt = 0;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
cptr = pvr2_hdw_get_ctrl_by_index(sfp->channel.hdw,id);
if (!cptr) return -EINVAL;
@@ -208,14 +208,14 @@ static ssize_t show_val_custom(int id,struct class_device *class_dev,char *buf)
return cnt+1;
}
-static ssize_t show_enum(int id,struct class_device *class_dev,char *buf)
+static ssize_t show_enum(int id,struct device *class_dev,char *buf)
{
struct pvr2_ctrl *cptr;
struct pvr2_sysfs *sfp;
long val;
unsigned int bcnt,ccnt,ecnt;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
cptr = pvr2_hdw_get_ctrl_by_index(sfp->channel.hdw,id);
if (!cptr) return -EINVAL;
@@ -233,14 +233,14 @@ static ssize_t show_enum(int id,struct class_device *class_dev,char *buf)
return bcnt;
}
-static ssize_t show_bits(int id,struct class_device *class_dev,char *buf)
+static ssize_t show_bits(int id,struct device *class_dev,char *buf)
{
struct pvr2_ctrl *cptr;
struct pvr2_sysfs *sfp;
int valid_bits,msk;
unsigned int bcnt,ccnt;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
cptr = pvr2_hdw_get_ctrl_by_index(sfp->channel.hdw,id);
if (!cptr) return -EINVAL;
@@ -278,23 +278,23 @@ static int store_val_any(int id,int customfl,struct pvr2_sysfs *sfp,
return ret;
}
-static ssize_t store_val_norm(int id,struct class_device *class_dev,
+static ssize_t store_val_norm(int id,struct device *class_dev,
const char *buf,size_t count)
{
struct pvr2_sysfs *sfp;
int ret;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
ret = store_val_any(id,0,sfp,buf,count);
if (!ret) ret = count;
return ret;
}
-static ssize_t store_val_custom(int id,struct class_device *class_dev,
+static ssize_t store_val_custom(int id,struct device *class_dev,
const char *buf,size_t count)
{
struct pvr2_sysfs *sfp;
int ret;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
ret = store_val_any(id,1,sfp,buf,count);
if (!ret) ret = count;
return ret;
@@ -304,7 +304,7 @@ static ssize_t store_val_custom(int id,struct class_device *class_dev,
Mike Isely <isely@pobox.com> 30-April-2005
This next batch of horrible preprocessor hackery is needed because the
- kernel's class_device_attribute mechanism fails to pass the actual
+ kernel's device_attribute mechanism fails to pass the actual
attribute through to the show / store functions, which means we have no
way to package up any attribute-specific parameters, like for example the
control id. So we work around this brain-damage by encoding the control
@@ -314,11 +314,13 @@ static ssize_t store_val_custom(int id,struct class_device *class_dev,
*/
#define CREATE_SHOW_INSTANCE(sf_name,ctl_id) \
-static ssize_t sf_name##_##ctl_id(struct class_device *class_dev,char *buf) \
+static ssize_t sf_name##_##ctl_id(struct device *class_dev, \
+struct device_attribute *attr, char *buf) \
{ return sf_name(ctl_id,class_dev,buf); }
#define CREATE_STORE_INSTANCE(sf_name,ctl_id) \
-static ssize_t sf_name##_##ctl_id(struct class_device *class_dev,const char *buf,size_t count) \
+static ssize_t sf_name##_##ctl_id(struct device *class_dev, \
+struct device_attribute *attr, const char *buf, size_t count) \
{ return sf_name(ctl_id,class_dev,buf,count); }
#define CREATE_BATCH(ctl_id) \
@@ -395,17 +397,27 @@ CREATE_BATCH(58)
CREATE_BATCH(59)
struct pvr2_sysfs_func_set {
- ssize_t (*show_name)(struct class_device *,char *);
- ssize_t (*show_type)(struct class_device *,char *);
- ssize_t (*show_min)(struct class_device *,char *);
- ssize_t (*show_max)(struct class_device *,char *);
- ssize_t (*show_enum)(struct class_device *,char *);
- ssize_t (*show_bits)(struct class_device *,char *);
- ssize_t (*show_val_norm)(struct class_device *,char *);
- ssize_t (*store_val_norm)(struct class_device *,
+ ssize_t (*show_name)(struct device *,
+ struct device_attribute *attr, char *);
+ ssize_t (*show_type)(struct device *,
+ struct device_attribute *attr, char *);
+ ssize_t (*show_min)(struct device *,
+ struct device_attribute *attr, char *);
+ ssize_t (*show_max)(struct device *,
+ struct device_attribute *attr, char *);
+ ssize_t (*show_enum)(struct device *,
+ struct device_attribute *attr, char *);
+ ssize_t (*show_bits)(struct device *,
+ struct device_attribute *attr, char *);
+ ssize_t (*show_val_norm)(struct device *,
+ struct device_attribute *attr, char *);
+ ssize_t (*store_val_norm)(struct device *,
+ struct device_attribute *attr,
const char *,size_t);
- ssize_t (*show_val_custom)(struct class_device *,char *);
- ssize_t (*store_val_custom)(struct class_device *,
+ ssize_t (*show_val_custom)(struct device *,
+ struct device_attribute *attr, char *);
+ ssize_t (*store_val_custom)(struct device *,
+ struct device_attribute *attr,
const char *,size_t);
};
@@ -597,9 +609,12 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id)
}
#ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC
-static ssize_t debuginfo_show(struct class_device *,char *);
-static ssize_t debugcmd_show(struct class_device *,char *);
-static ssize_t debugcmd_store(struct class_device *,const char *,size_t count);
+static ssize_t debuginfo_show(struct device *, struct device_attribute *,
+ char *);
+static ssize_t debugcmd_show(struct device *, struct device_attribute *,
+ char *);
+static ssize_t debugcmd_store(struct device *, struct device_attribute *,
+ const char *, size_t count);
static void pvr2_sysfs_add_debugifc(struct pvr2_sysfs *sfp)
{
@@ -616,16 +631,16 @@ static void pvr2_sysfs_add_debugifc(struct pvr2_sysfs *sfp)
dip->attr_debuginfo.attr.mode = S_IRUGO;
dip->attr_debuginfo.show = debuginfo_show;
sfp->debugifc = dip;
- ret = class_device_create_file(sfp->class_dev,&dip->attr_debugcmd);
+ ret = device_create_file(sfp->class_dev,&dip->attr_debugcmd);
if (ret < 0) {
- printk(KERN_WARNING "%s: class_device_create_file error: %d\n",
+ printk(KERN_WARNING "%s: device_create_file error: %d\n",
__FUNCTION__, ret);
} else {
dip->debugcmd_created_ok = !0;
}
- ret = class_device_create_file(sfp->class_dev,&dip->attr_debuginfo);
+ ret = device_create_file(sfp->class_dev,&dip->attr_debuginfo);
if (ret < 0) {
- printk(KERN_WARNING "%s: class_device_create_file error: %d\n",
+ printk(KERN_WARNING "%s: device_create_file error: %d\n",
__FUNCTION__, ret);
} else {
dip->debuginfo_created_ok = !0;
@@ -637,11 +652,11 @@ static void pvr2_sysfs_tear_down_debugifc(struct pvr2_sysfs *sfp)
{
if (!sfp->debugifc) return;
if (sfp->debugifc->debuginfo_created_ok) {
- class_device_remove_file(sfp->class_dev,
+ device_remove_file(sfp->class_dev,
&sfp->debugifc->attr_debuginfo);
}
if (sfp->debugifc->debugcmd_created_ok) {
- class_device_remove_file(sfp->class_dev,
+ device_remove_file(sfp->class_dev,
&sfp->debugifc->attr_debugcmd);
}
kfree(sfp->debugifc);
@@ -683,7 +698,7 @@ static void pvr2_sysfs_class_release(struct class *class)
}
-static void pvr2_sysfs_release(struct class_device *class_dev)
+static void pvr2_sysfs_release(struct device *class_dev)
{
pvr2_sysfs_trace("Releasing class_dev id=%p",class_dev);
kfree(class_dev);
@@ -698,32 +713,33 @@ static void class_dev_destroy(struct pvr2_sysfs *sfp)
#endif /* CONFIG_VIDEO_PVRUSB2_DEBUGIFC */
pvr2_sysfs_tear_down_controls(sfp);
if (sfp->bus_info_created_ok) {
- class_device_remove_file(sfp->class_dev,
+ device_remove_file(sfp->class_dev,
&sfp->attr_bus_info);
}
if (sfp->v4l_minor_number_created_ok) {
- class_device_remove_file(sfp->class_dev,
+ device_remove_file(sfp->class_dev,
&sfp->attr_v4l_minor_number);
}
if (sfp->v4l_radio_minor_number_created_ok) {
- class_device_remove_file(sfp->class_dev,
+ device_remove_file(sfp->class_dev,
&sfp->attr_v4l_radio_minor_number);
}
if (sfp->unit_number_created_ok) {
- class_device_remove_file(sfp->class_dev,
+ device_remove_file(sfp->class_dev,
&sfp->attr_unit_number);
}
pvr2_sysfs_trace("Destroying class_dev id=%p",sfp->class_dev);
- sfp->class_dev->class_data = NULL;
- class_device_unregister(sfp->class_dev);
+ sfp->class_dev->driver_data = NULL;
+ device_unregister(sfp->class_dev);
sfp->class_dev = NULL;
}
-static ssize_t v4l_minor_number_show(struct class_device *class_dev,char *buf)
+static ssize_t v4l_minor_number_show(struct device *class_dev,
+ struct device_attribute *attr, char *buf)
{
struct pvr2_sysfs *sfp;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
return scnprintf(buf,PAGE_SIZE,"%d\n",
pvr2_hdw_v4l_get_minor_number(sfp->channel.hdw,
@@ -731,21 +747,23 @@ static ssize_t v4l_minor_number_show(struct class_device *class_dev,char *buf)
}
-static ssize_t bus_info_show(struct class_device *class_dev,char *buf)
+static ssize_t bus_info_show(struct device *class_dev,
+ struct device_attribute *attr, char *buf)
{
struct pvr2_sysfs *sfp;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
return scnprintf(buf,PAGE_SIZE,"%s\n",
pvr2_hdw_get_bus_info(sfp->channel.hdw));
}
-static ssize_t v4l_radio_minor_number_show(struct class_device *class_dev,
+static ssize_t v4l_radio_minor_number_show(struct device *class_dev,
+ struct device_attribute *attr,
char *buf)
{
struct pvr2_sysfs *sfp;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
return scnprintf(buf,PAGE_SIZE,"%d\n",
pvr2_hdw_v4l_get_minor_number(sfp->channel.hdw,
@@ -753,10 +771,11 @@ static ssize_t v4l_radio_minor_number_show(struct class_device *class_dev,
}
-static ssize_t unit_number_show(struct class_device *class_dev,char *buf)
+static ssize_t unit_number_show(struct device *class_dev,
+ struct device_attribute *attr, char *buf)
{
struct pvr2_sysfs *sfp;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
return scnprintf(buf,PAGE_SIZE,"%d\n",
pvr2_hdw_get_unit_number(sfp->channel.hdw));
@@ -767,7 +786,7 @@ static void class_dev_create(struct pvr2_sysfs *sfp,
struct pvr2_sysfs_class *class_ptr)
{
struct usb_device *usb_dev;
- struct class_device *class_dev;
+ struct device *class_dev;
int ret;
usb_dev = pvr2_hdw_get_dev(sfp->channel.hdw);
@@ -779,23 +798,23 @@ static void class_dev_create(struct pvr2_sysfs *sfp,
class_dev->class = &class_ptr->class;
if (pvr2_hdw_get_sn(sfp->channel.hdw)) {
- snprintf(class_dev->class_id,BUS_ID_SIZE,"sn-%lu",
+ snprintf(class_dev->bus_id, BUS_ID_SIZE, "sn-%lu",
pvr2_hdw_get_sn(sfp->channel.hdw));
} else if (pvr2_hdw_get_unit_number(sfp->channel.hdw) >= 0) {
- snprintf(class_dev->class_id,BUS_ID_SIZE,"unit-%c",
+ snprintf(class_dev->bus_id, BUS_ID_SIZE, "unit-%c",
pvr2_hdw_get_unit_number(sfp->channel.hdw) + 'a');
} else {
kfree(class_dev);
return;
}
- class_dev->dev = &usb_dev->dev;
+ class_dev->parent = &usb_dev->dev;
sfp->class_dev = class_dev;
- class_dev->class_data = sfp;
- ret = class_device_register(class_dev);
+ class_dev->driver_data = sfp;
+ ret = device_register(class_dev);
if (ret) {
- printk(KERN_ERR "%s: class_device_register failed\n",
+ printk(KERN_ERR "%s: device_register failed\n",
__FUNCTION__);
kfree(class_dev);
return;
@@ -805,10 +824,10 @@ static void class_dev_create(struct pvr2_sysfs *sfp,
sfp->attr_v4l_minor_number.attr.mode = S_IRUGO;
sfp->attr_v4l_minor_number.show = v4l_minor_number_show;
sfp->attr_v4l_minor_number.store = NULL;
- ret = class_device_create_file(sfp->class_dev,
+ ret = device_create_file(sfp->class_dev,
&sfp->attr_v4l_minor_number);
if (ret < 0) {
- printk(KERN_WARNING "%s: class_device_create_file error: %d\n",
+ printk(KERN_WARNING "%s: device_create_file error: %d\n",
__FUNCTION__, ret);
} else {
sfp->v4l_minor_number_created_ok = !0;
@@ -818,10 +837,10 @@ static void class_dev_create(struct pvr2_sysfs *sfp,
sfp->attr_v4l_radio_minor_number.attr.mode = S_IRUGO;
sfp->attr_v4l_radio_minor_number.show = v4l_radio_minor_number_show;
sfp->attr_v4l_radio_minor_number.store = NULL;
- ret = class_device_create_file(sfp->class_dev,
+ ret = device_create_file(sfp->class_dev,
&sfp->attr_v4l_radio_minor_number);
if (ret < 0) {
- printk(KERN_WARNING "%s: class_device_create_file error: %d\n",
+ printk(KERN_WARNING "%s: device_create_file error: %d\n",
__FUNCTION__, ret);
} else {
sfp->v4l_radio_minor_number_created_ok = !0;
@@ -831,9 +850,9 @@ static void class_dev_create(struct pvr2_sysfs *sfp,
sfp->attr_unit_number.attr.mode = S_IRUGO;
sfp->attr_unit_number.show = unit_number_show;
sfp->attr_unit_number.store = NULL;
- ret = class_device_create_file(sfp->class_dev,&sfp->attr_unit_number);
+ ret = device_create_file(sfp->class_dev,&sfp->attr_unit_number);
if (ret < 0) {
- printk(KERN_WARNING "%s: class_device_create_file error: %d\n",
+ printk(KERN_WARNING "%s: device_create_file error: %d\n",
__FUNCTION__, ret);
} else {
sfp->unit_number_created_ok = !0;
@@ -843,10 +862,10 @@ static void class_dev_create(struct pvr2_sysfs *sfp,
sfp->attr_bus_info.attr.mode = S_IRUGO;
sfp->attr_bus_info.show = bus_info_show;
sfp->attr_bus_info.store = NULL;
- ret = class_device_create_file(sfp->class_dev,
+ ret = device_create_file(sfp->class_dev,
&sfp->attr_bus_info);
if (ret < 0) {
- printk(KERN_WARNING "%s: class_device_create_file error: %d\n",
+ printk(KERN_WARNING "%s: device_create_file error: %d\n",
__FUNCTION__, ret);
} else {
sfp->bus_info_created_ok = !0;
@@ -886,7 +905,7 @@ struct pvr2_sysfs *pvr2_sysfs_create(struct pvr2_context *mp,
}
-static int pvr2_sysfs_hotplug(struct class_device *cd,char **envp,
+static int pvr2_sysfs_hotplug(struct device *cd,char **envp,
int numenvp,char *buf,int size)
{
/* Even though we don't do anything here, we still need this function
@@ -902,8 +921,8 @@ struct pvr2_sysfs_class *pvr2_sysfs_class_create(void)
pvr2_sysfs_trace("Creating pvr2_sysfs_class id=%p",clp);
clp->class.name = "pvrusb2";
clp->class.class_release = pvr2_sysfs_class_release;
- clp->class.release = pvr2_sysfs_release;
- clp->class.uevent = pvr2_sysfs_hotplug;
+ clp->class.dev_release = pvr2_sysfs_release;
+ clp->class.dev_uevent = pvr2_sysfs_hotplug;
if (class_register(&clp->class)) {
pvr2_sysfs_trace(
"Registration failed for pvr2_sysfs_class id=%p",clp);
@@ -921,32 +940,35 @@ void pvr2_sysfs_class_destroy(struct pvr2_sysfs_class *clp)
#ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC
-static ssize_t debuginfo_show(struct class_device *class_dev,char *buf)
+static ssize_t debuginfo_show(struct device *class_dev,
+ struct device_attribute *attr, char *buf)
{
struct pvr2_sysfs *sfp;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
pvr2_hdw_trigger_module_log(sfp->channel.hdw);
return pvr2_debugifc_print_info(sfp->channel.hdw,buf,PAGE_SIZE);
}
-static ssize_t debugcmd_show(struct class_device *class_dev,char *buf)
+static ssize_t debugcmd_show(struct device *class_dev,
+ struct device_attribute *attr, char *buf)
{
struct pvr2_sysfs *sfp;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
return pvr2_debugifc_print_status(sfp->channel.hdw,buf,PAGE_SIZE);
}
-static ssize_t debugcmd_store(struct class_device *class_dev,
- const char *buf,size_t count)
+static ssize_t debugcmd_store(struct device *class_dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct pvr2_sysfs *sfp;
int ret;
- sfp = (struct pvr2_sysfs *)class_dev->class_data;
+ sfp = (struct pvr2_sysfs *)class_dev->driver_data;
if (!sfp) return -EINVAL;
ret = pvr2_debugifc_docmd(sfp->channel.hdw,buf,count);
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 338ced7188f..ea53316d211 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -1648,7 +1648,7 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
ARG_OUT(cmd)
break;
}
- /*
+ /*
case VIDIOCPWCGVIDTABLE:
{
ARG_DEF(struct pwc_table_init_buffer, table);
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 931b274bffc..0b67d4ec031 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -64,7 +64,6 @@
#include <linux/vmalloc.h>
#include <linux/version.h>
#include <asm/io.h>
-#include <linux/moduleparam.h>
#include "pwc.h"
#include "pwc-kiara.h"
@@ -127,9 +126,9 @@ static struct usb_driver pwc_driver = {
static int default_size = PSZ_QCIF;
static int default_fps = 10;
static int default_fbufs = 3; /* Default number of frame buffers */
- int pwc_mbufs = 2; /* Default number of mmap() buffers */
+ int pwc_mbufs = 2; /* Default number of mmap() buffers */
#ifdef CONFIG_USB_PWC_DEBUG
- int pwc_trace = PWC_DEBUG_LEVEL;
+ int pwc_trace = PWC_DEBUG_LEVEL;
#endif
static int power_save = 0;
static int led_on = 100, led_off = 0; /* defaults to LED that is on while in use */
@@ -908,31 +907,49 @@ int pwc_isoc_init(struct pwc_device *pdev)
return 0;
}
-void pwc_isoc_cleanup(struct pwc_device *pdev)
+static void pwc_iso_stop(struct pwc_device *pdev)
{
int i;
- PWC_DEBUG_OPEN(">> pwc_isoc_cleanup()\n");
- if (pdev == NULL)
- return;
- if (pdev->iso_init == 0)
- return;
-
/* Unlinking ISOC buffers one by one */
for (i = 0; i < MAX_ISO_BUFS; i++) {
struct urb *urb;
urb = pdev->sbuf[i].urb;
if (urb != 0) {
- if (pdev->iso_init) {
- PWC_DEBUG_MEMORY("Unlinking URB %p\n", urb);
- usb_kill_urb(urb);
- }
+ PWC_DEBUG_MEMORY("Unlinking URB %p\n", urb);
+ usb_kill_urb(urb);
+ }
+ }
+}
+
+static void pwc_iso_free(struct pwc_device *pdev)
+{
+ int i;
+
+ /* Freeing ISOC buffers one by one */
+ for (i = 0; i < MAX_ISO_BUFS; i++) {
+ struct urb *urb;
+
+ urb = pdev->sbuf[i].urb;
+ if (urb != 0) {
PWC_DEBUG_MEMORY("Freeing URB\n");
usb_free_urb(urb);
pdev->sbuf[i].urb = NULL;
}
}
+}
+
+void pwc_isoc_cleanup(struct pwc_device *pdev)
+{
+ PWC_DEBUG_OPEN(">> pwc_isoc_cleanup()\n");
+ if (pdev == NULL)
+ return;
+ if (pdev->iso_init == 0)
+ return;
+
+ pwc_iso_stop(pdev);
+ pwc_iso_free(pdev);
/* Stop camera, but only if we are sure the camera is still there (unplug
is signalled by EPIPE)
@@ -979,20 +996,22 @@ int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_f
/*********
* sysfs
*********/
-static struct pwc_device *cd_to_pwc(struct class_device *cd)
+static struct pwc_device *cd_to_pwc(struct device *cd)
{
struct video_device *vdev = to_video_device(cd);
return video_get_drvdata(vdev);
}
-static ssize_t show_pan_tilt(struct class_device *class_dev, char *buf)
+static ssize_t show_pan_tilt(struct device *class_dev,
+ struct device_attribute *attr, char *buf)
{
struct pwc_device *pdev = cd_to_pwc(class_dev);
return sprintf(buf, "%d %d\n", pdev->pan_angle, pdev->tilt_angle);
}
-static ssize_t store_pan_tilt(struct class_device *class_dev, const char *buf,
- size_t count)
+static ssize_t store_pan_tilt(struct device *class_dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct pwc_device *pdev = cd_to_pwc(class_dev);
int pan, tilt;
@@ -1008,10 +1027,11 @@ static ssize_t store_pan_tilt(struct class_device *class_dev, const char *buf,
return ret;
return strlen(buf);
}
-static CLASS_DEVICE_ATTR(pan_tilt, S_IRUGO | S_IWUSR, show_pan_tilt,
- store_pan_tilt);
+static DEVICE_ATTR(pan_tilt, S_IRUGO | S_IWUSR, show_pan_tilt,
+ store_pan_tilt);
-static ssize_t show_snapshot_button_status(struct class_device *class_dev, char *buf)
+static ssize_t show_snapshot_button_status(struct device *class_dev,
+ struct device_attribute *attr, char *buf)
{
struct pwc_device *pdev = cd_to_pwc(class_dev);
int status = pdev->snapshot_button_status;
@@ -1019,26 +1039,26 @@ static ssize_t show_snapshot_button_status(struct class_device *class_dev, char
return sprintf(buf, "%d\n", status);
}
-static CLASS_DEVICE_ATTR(button, S_IRUGO | S_IWUSR, show_snapshot_button_status,
- NULL);
+static DEVICE_ATTR(button, S_IRUGO | S_IWUSR, show_snapshot_button_status,
+ NULL);
static int pwc_create_sysfs_files(struct video_device *vdev)
{
struct pwc_device *pdev = video_get_drvdata(vdev);
int rc;
- rc = video_device_create_file(vdev, &class_device_attr_button);
+ rc = video_device_create_file(vdev, &dev_attr_button);
if (rc)
goto err;
if (pdev->features & FEATURE_MOTOR_PANTILT) {
- rc = video_device_create_file(vdev,&class_device_attr_pan_tilt);
+ rc = video_device_create_file(vdev, &dev_attr_pan_tilt);
if (rc) goto err_button;
}
return 0;
err_button:
- video_device_remove_file(vdev, &class_device_attr_button);
+ video_device_remove_file(vdev, &dev_attr_button);
err:
return rc;
}
@@ -1047,8 +1067,8 @@ static void pwc_remove_sysfs_files(struct video_device *vdev)
{
struct pwc_device *pdev = video_get_drvdata(vdev);
if (pdev->features & FEATURE_MOTOR_PANTILT)
- video_device_remove_file(vdev, &class_device_attr_pan_tilt);
- video_device_remove_file(vdev, &class_device_attr_button);
+ video_device_remove_file(vdev, &dev_attr_pan_tilt);
+ video_device_remove_file(vdev, &dev_attr_button);
}
#ifdef CONFIG_USB_PWC_DEBUG
@@ -1212,6 +1232,7 @@ static int pwc_video_close(struct inode *inode, struct file *file)
PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev);
+ lock_kernel();
pdev = (struct pwc_device *)vdev->priv;
if (pdev->vopen == 0)
PWC_DEBUG_MODULE("video_close() called on closed device?\n");
@@ -1231,7 +1252,6 @@ static int pwc_video_close(struct inode *inode, struct file *file)
pwc_isoc_cleanup(pdev);
pwc_free_buffers(pdev);
- lock_kernel();
/* Turn off LEDS and power down camera, but only when not unplugged */
if (!pdev->unplugged) {
/* Turn LEDs off */
@@ -1277,7 +1297,7 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf,
struct pwc_device *pdev;
int noblock = file->f_flags & O_NONBLOCK;
DECLARE_WAITQUEUE(wait, current);
- int bytes_to_read;
+ int bytes_to_read, rv = 0;
void *image_buffer_addr;
PWC_DEBUG_READ("pwc_video_read(vdev=0x%p, buf=%p, count=%zd) called.\n",
@@ -1287,8 +1307,12 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf,
pdev = vdev->priv;
if (pdev == NULL)
return -EFAULT;
- if (pdev->error_status)
- return -pdev->error_status; /* Something happened, report what. */
+
+ mutex_lock(&pdev->modlock);
+ if (pdev->error_status) {
+ rv = -pdev->error_status; /* Something happened, report what. */
+ goto err_out;
+ }
/* In case we're doing partial reads, we don't have to wait for a frame */
if (pdev->image_read_pos == 0) {
@@ -1299,17 +1323,20 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf,
if (pdev->error_status) {
remove_wait_queue(&pdev->frameq, &wait);
set_current_state(TASK_RUNNING);
- return -pdev->error_status ;
+ rv = -pdev->error_status ;
+ goto err_out;
}
if (noblock) {
remove_wait_queue(&pdev->frameq, &wait);
set_current_state(TASK_RUNNING);
- return -EWOULDBLOCK;
+ rv = -EWOULDBLOCK;
+ goto err_out;
}
if (signal_pending(current)) {
remove_wait_queue(&pdev->frameq, &wait);
set_current_state(TASK_RUNNING);
- return -ERESTARTSYS;
+ rv = -ERESTARTSYS;
+ goto err_out;
}
schedule();
set_current_state(TASK_INTERRUPTIBLE);
@@ -1318,8 +1345,10 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf,
set_current_state(TASK_RUNNING);
/* Decompress and release frame */
- if (pwc_handle_frame(pdev))
- return -EFAULT;
+ if (pwc_handle_frame(pdev)) {
+ rv = -EFAULT;
+ goto err_out;
+ }
}
PWC_DEBUG_READ("Copying data to user space.\n");
@@ -1334,14 +1363,20 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf,
image_buffer_addr = pdev->image_data;
image_buffer_addr += pdev->images[pdev->fill_image].offset;
image_buffer_addr += pdev->image_read_pos;
- if (copy_to_user(buf, image_buffer_addr, count))
- return -EFAULT;
+ if (copy_to_user(buf, image_buffer_addr, count)) {
+ rv = -EFAULT;
+ goto err_out;
+ }
pdev->image_read_pos += count;
if (pdev->image_read_pos >= bytes_to_read) { /* All data has been read */
pdev->image_read_pos = 0;
pwc_next_image(pdev);
}
+ mutex_unlock(&pdev->modlock);
return count;
+err_out:
+ mutex_unlock(&pdev->modlock);
+ return rv;
}
static unsigned int pwc_video_poll(struct file *file, poll_table *wait)
@@ -1367,7 +1402,20 @@ static unsigned int pwc_video_poll(struct file *file, poll_table *wait)
static int pwc_video_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
- return video_usercopy(inode, file, cmd, arg, pwc_video_do_ioctl);
+ struct video_device *vdev = file->private_data;
+ struct pwc_device *pdev;
+ int r = -ENODEV;
+
+ if (!vdev)
+ goto out;
+ pdev = vdev->priv;
+
+ mutex_lock(&pdev->modlock);
+ if (!pdev->unplugged)
+ r = video_usercopy(inode, file, cmd, arg, pwc_video_do_ioctl);
+ mutex_unlock(&pdev->modlock);
+out:
+ return r;
}
static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma)
@@ -1810,7 +1858,10 @@ static void usb_pwc_disconnect(struct usb_interface *intf)
wake_up_interruptible(&pdev->frameq);
/* Wait until device is closed */
if(pdev->vopen) {
+ mutex_lock(&pdev->modlock);
pdev->unplugged = 1;
+ mutex_unlock(&pdev->modlock);
+ pwc_iso_stop(pdev);
} else {
/* Device is closed, so we can safely unregister it */
PWC_DEBUG_PROBE("Unregistering video device in disconnect().\n");
@@ -1828,7 +1879,6 @@ disconnect_out:
unlock_kernel();
}
-
/* *grunt* We have to do atoi ourselves :-( */
static int pwc_atoi(const char *s)
{
diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c
index 92eabf88a09..72e344a12c7 100644
--- a/drivers/media/video/saa6588.c
+++ b/drivers/media/video/saa6588.c
@@ -406,6 +406,7 @@ static int saa6588_attach(struct i2c_adapter *adap, int addr, int kind)
kfree(s);
return -ENOMEM;
}
+ spin_lock_init(&s->lock);
s->client = client_template;
s->block_count = 0;
s->wr_index = 0;
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index 9f986930490..e35ef321ec7 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -332,11 +332,11 @@ static int saa7127_set_vps(struct i2c_client *client, struct v4l2_sliced_vbi_dat
if (!enable)
return 0;
- state->vps_data[0] = data->data[4];
- state->vps_data[1] = data->data[10];
- state->vps_data[2] = data->data[11];
- state->vps_data[3] = data->data[12];
- state->vps_data[4] = data->data[13];
+ state->vps_data[0] = data->data[2];
+ state->vps_data[1] = data->data[8];
+ state->vps_data[2] = data->data[9];
+ state->vps_data[3] = data->data[10];
+ state->vps_data[4] = data->data[11];
v4l_dbg(1, debug, client, "Set VPS data %02x %02x %02x %02x %02x\n",
state->vps_data[0], state->vps_data[1],
state->vps_data[2], state->vps_data[3],
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 9f1417a4f7d..d6d8d660196 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -1,7 +1,7 @@
config VIDEO_SAA7134
tristate "Philips SAA7134 support"
depends on VIDEO_DEV && PCI && I2C
- select VIDEO_BUF
+ select VIDEOBUF_DMA_SG
select VIDEO_IR
select VIDEO_TUNER
select CRC32
@@ -38,7 +38,7 @@ config VIDEO_SAA7134_OSS
config VIDEO_SAA7134_DVB
tristate "DVB/ATSC Support for saa7134 based TV cards"
depends on VIDEO_SAA7134 && DVB_CORE
- select VIDEO_BUF_DVB
+ select VIDEOBUF_DVB
select FW_LOADER
select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_MT352 if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index 3c0fc9027ad..c6f7279669c 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -20,7 +20,6 @@
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/wait.h>
-#include <linux/moduleparam.h>
#include <linux/module.h>
#include <sound/driver.h>
#include <sound/core.h>
@@ -313,7 +312,7 @@ static int dsp_buffer_free(struct saa7134_dev *dev)
dev->dmasound.blksize = 0;
dev->dmasound.bufsize = 0;
- return 0;
+ return 0;
}
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 25ec1681081..a4c192fb4e4 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -32,6 +32,7 @@ static char name_mute[] = "mute";
static char name_radio[] = "Radio";
static char name_tv[] = "Television";
static char name_tv_mono[] = "TV (mono only)";
+static char name_comp[] = "Composite";
static char name_comp1[] = "Composite1";
static char name_comp2[] = "Composite2";
static char name_comp3[] = "Composite3";
@@ -1535,12 +1536,7 @@ struct saa7134_board saa7134_boards[] = {
.tv = 1,
.gpio = 0x00,
},{
- .name = name_comp1,
- .vmux = 0,
- .amux = LINE1,
- .gpio = 0x02,
- },{
- .name = name_comp2,
+ .name = name_comp,
.vmux = 3,
.amux = LINE1,
.gpio = 0x02,
@@ -2771,6 +2767,7 @@ struct saa7134_board saa7134_boards[] = {
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.mpeg = SAA7134_MPEG_DVB,
+ .gpiomask = 1 << 21,
.inputs = {{
.name = name_tv,
.vmux = 1,
@@ -2781,13 +2778,18 @@ struct saa7134_board saa7134_boards[] = {
.vmux = 3,
.amux = LINE1,
},{
- .name = name_svideo,
+ .name = name_comp2,
.vmux = 0,
.amux = LINE1,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
}},
.radio = {
.name = name_radio,
- .amux = LINE1,
+ .amux = TV,
+ .gpio = 0x0200000,
},
},
[SAA7134_BOARD_KWORLD_DVBT_210] = {
@@ -2820,7 +2822,7 @@ struct saa7134_board saa7134_boards[] = {
},
},
[SAA7134_BOARD_KWORLD_ATSC110] = {
- .name = "Kworld ATSC110",
+ .name = "Kworld ATSC110/115",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TUV1236D,
.radio_type = UNSET,
@@ -2896,7 +2898,7 @@ struct saa7134_board saa7134_boards[] = {
.radio_addr = ADDR_UNSET,
},
[SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS] = {
- .name = "LifeView FlyDVB-T Hybrid Cardbus",
+ .name = "LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB",
.audio_clock = 0x00200000,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
@@ -3534,6 +3536,22 @@ struct saa7134_board saa7134_boards[] = {
.gpio = 0x3000,
},
},
+ [SAA7134_BOARD_AVERMEDIA_SUPER_007] = {
+ .name = "Avermedia Super 007",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tuner_config = 0,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv, /* FIXME: analog tv untested */
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }},
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -4066,6 +4084,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
.driver_data = SAA7134_BOARD_KWORLD_ATSC110,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */
+ .subvendor = 0x17de,
+ .subdevice = 0x7352,
+ .driver_data = SAA7134_BOARD_KWORLD_ATSC110, /* ATSC 115 */
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
.subvendor = 0x1461,
.subdevice = 0x7360,
@@ -4257,6 +4281,18 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subdevice = 0x2304,
.driver_data = SAA7134_BOARD_10MOONSTVMASTER3,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xf01d, /* AVerTV DVB-T Super 007 */
+ .driver_data = SAA7134_BOARD_AVERMEDIA_SUPER_007,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x4e42,
+ .subdevice = 0x3502,
+ .driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -4564,6 +4600,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
break;
case SAA7134_BOARD_PHILIPS_TIGER:
case SAA7134_BOARD_PHILIPS_TIGER_S:
+ case SAA7134_BOARD_AVERMEDIA_SUPER_007:
{
u8 data[] = { 0x3c, 0x33, 0x60};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 25f84701a8e..1a4a24471f2 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -23,7 +23,6 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/kmod.h>
@@ -32,6 +31,7 @@
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/dma-mapping.h>
+#include <linux/pm.h>
#include "saa7134-reg.h"
#include "saa7134.h"
@@ -237,9 +237,10 @@ int saa7134_buffer_startpage(struct saa7134_buf *buf)
unsigned long saa7134_buffer_base(struct saa7134_buf *buf)
{
unsigned long base;
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
base = saa7134_buffer_startpage(buf) * 4096;
- base += buf->vb.dma.sglist[0].offset;
+ base += dma->sglist[0].offset;
return base;
}
@@ -287,11 +288,12 @@ void saa7134_pgtable_free(struct pci_dev *pci, struct saa7134_pgtable *pt)
void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf)
{
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
BUG_ON(in_interrupt());
videobuf_waiton(&buf->vb,0,0);
- videobuf_dma_unmap(q, &buf->vb.dma);
- videobuf_dma_free(&buf->vb.dma);
+ videobuf_dma_unmap(q, dma);
+ videobuf_dma_free(dma);
buf->vb.state = STATE_NEEDS_INIT;
}
@@ -391,6 +393,32 @@ void saa7134_buffer_timeout(unsigned long data)
spin_unlock_irqrestore(&dev->slock,flags);
}
+/* resends a current buffer in queue after resume */
+
+int saa7134_buffer_requeue(struct saa7134_dev *dev,
+ struct saa7134_dmaqueue *q)
+{
+ struct saa7134_buf *buf, *next;
+
+ assert_spin_locked(&dev->slock);
+
+ buf = q->curr;
+ next = buf;
+ dprintk("buffer_requeue\n");
+
+ if (!buf)
+ return 0;
+
+ dprintk("buffer_requeue : resending active buffers \n");
+
+ if (!list_empty(&q->queue))
+ next = list_entry(q->queue.next, struct saa7134_buf,
+ vb.queue);
+ buf->activate(dev, buf, next);
+
+ return 0;
+}
+
/* ------------------------------------------------------------------ */
int saa7134_set_dmabits(struct saa7134_dev *dev)
@@ -401,6 +429,9 @@ int saa7134_set_dmabits(struct saa7134_dev *dev)
assert_spin_locked(&dev->slock);
+ if (dev->inresume)
+ return 0;
+
/* video capture -- dma 0 + video task A */
if (dev->video_q.curr) {
task |= 0x01;
@@ -560,8 +591,10 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id)
print_irqstatus(dev,loop,report,status);
- if (report & SAA7134_IRQ_REPORT_RDCAP /* _INTL */)
- saa7134_irq_video_intl(dev);
+ if ((report & SAA7134_IRQ_REPORT_RDCAP) ||
+ (report & SAA7134_IRQ_REPORT_INTL))
+ saa7134_irq_video_signalchange(dev);
+
if ((report & SAA7134_IRQ_REPORT_DONE_RA0) &&
(status & 0x60) == 0)
@@ -646,6 +679,39 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id)
/* ------------------------------------------------------------------ */
/* early init (no i2c, no irq) */
+
+static int saa7134_hw_enable1(struct saa7134_dev *dev)
+{
+ /* RAM FIFO config */
+ saa_writel(SAA7134_FIFO_SIZE, 0x08070503);
+ saa_writel(SAA7134_THRESHOULD, 0x02020202);
+
+ /* enable audio + video processing */
+ saa_writel(SAA7134_MAIN_CTRL,
+ SAA7134_MAIN_CTRL_VPLLE |
+ SAA7134_MAIN_CTRL_APLLE |
+ SAA7134_MAIN_CTRL_EXOSC |
+ SAA7134_MAIN_CTRL_EVFE1 |
+ SAA7134_MAIN_CTRL_EVFE2 |
+ SAA7134_MAIN_CTRL_ESFE |
+ SAA7134_MAIN_CTRL_EBDAC);
+
+ /*
+ * Initialize OSS _after_ enabling audio clock PLL and audio processing.
+ * OSS initialization writes to registers via the audio DSP; these
+ * writes will fail unless the audio clock has been started. At worst,
+ * audio will not work.
+ */
+
+ /* enable peripheral devices */
+ saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
+
+ /* set vertical line numbering start (vbi needs this) */
+ saa_writeb(SAA7134_SOURCE_TIMING2, 0x20);
+
+ return 0;
+}
+
static int saa7134_hwinit1(struct saa7134_dev *dev)
{
dprintk("hwinit1\n");
@@ -662,44 +728,16 @@ static int saa7134_hwinit1(struct saa7134_dev *dev)
saa7134_ts_init1(dev);
saa7134_input_init1(dev);
- /* RAM FIFO config */
- saa_writel(SAA7134_FIFO_SIZE, 0x08070503);
- saa_writel(SAA7134_THRESHOULD,0x02020202);
-
- /* enable audio + video processing */
- saa_writel(SAA7134_MAIN_CTRL,
- SAA7134_MAIN_CTRL_VPLLE |
- SAA7134_MAIN_CTRL_APLLE |
- SAA7134_MAIN_CTRL_EXOSC |
- SAA7134_MAIN_CTRL_EVFE1 |
- SAA7134_MAIN_CTRL_EVFE2 |
- SAA7134_MAIN_CTRL_ESFE |
- SAA7134_MAIN_CTRL_EBDAC);
-
- /*
- * Initialize OSS _after_ enabling audio clock PLL and audio processing.
- * OSS initialization writes to registers via the audio DSP; these
- * writes will fail unless the audio clock has been started. At worst,
- * audio will not work.
- */
-
- /* enable peripheral devices */
- saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
-
- /* set vertical line numbering start (vbi needs this) */
- saa_writeb(SAA7134_SOURCE_TIMING2, 0x20);
+ saa7134_hw_enable1(dev);
return 0;
}
/* late init (with i2c + irq) */
-static int saa7134_hwinit2(struct saa7134_dev *dev)
+static int saa7134_hw_enable2(struct saa7134_dev *dev)
{
- unsigned int irq2_mask;
- dprintk("hwinit2\n");
- saa7134_video_init2(dev);
- saa7134_tvaudio_init2(dev);
+ unsigned int irq2_mask;
/* enable IRQ's */
irq2_mask =
@@ -725,6 +763,20 @@ static int saa7134_hwinit2(struct saa7134_dev *dev)
return 0;
}
+static int saa7134_hwinit2(struct saa7134_dev *dev)
+{
+
+ dprintk("hwinit2\n");
+
+ saa7134_video_init2(dev);
+ saa7134_tvaudio_init2(dev);
+
+ saa7134_hw_enable2(dev);
+
+ return 0;
+}
+
+
/* shutdown */
static int saa7134_hwfini(struct saa7134_dev *dev)
{
@@ -838,7 +890,6 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
const struct pci_device_id *pci_id)
{
struct saa7134_dev *dev;
- struct list_head *item;
struct saa7134_mpeg_ops *mops;
int err;
@@ -1020,15 +1071,13 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
saa7134_devcount++;
mutex_lock(&devlist_lock);
- list_for_each(item,&mops_list) {
- mops = list_entry(item, struct saa7134_mpeg_ops, next);
+ list_for_each_entry(mops, &mops_list, next)
mpeg_ops_attach(mops, dev);
- }
list_add_tail(&dev->devlist,&saa7134_devlist);
mutex_unlock(&devlist_lock);
/* check for signal */
- saa7134_irq_video_intl(dev);
+ saa7134_irq_video_signalchange(dev);
if (saa7134_dmasound_init && !dev->dmasound.priv_data) {
saa7134_dmasound_init(dev);
@@ -1057,7 +1106,6 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
static void __devexit saa7134_finidev(struct pci_dev *pci_dev)
{
struct saa7134_dev *dev = pci_get_drvdata(pci_dev);
- struct list_head *item;
struct saa7134_mpeg_ops *mops;
/* Release DMA sound modules if present */
@@ -1086,10 +1134,8 @@ static void __devexit saa7134_finidev(struct pci_dev *pci_dev)
/* unregister */
mutex_lock(&devlist_lock);
list_del(&dev->devlist);
- list_for_each(item,&mops_list) {
- mops = list_entry(item, struct saa7134_mpeg_ops, next);
+ list_for_each_entry(mops, &mops_list, next)
mpeg_ops_detach(mops, dev);
- }
mutex_unlock(&devlist_lock);
saa7134_devcount--;
@@ -1117,18 +1163,79 @@ static void __devexit saa7134_finidev(struct pci_dev *pci_dev)
kfree(dev);
}
+static int saa7134_suspend(struct pci_dev *pci_dev , pm_message_t state)
+{
+
+ struct saa7134_dev *dev = pci_get_drvdata(pci_dev);
+
+ /* disable overlay - apps should enable it explicitly on resume*/
+ dev->ovenable = 0;
+
+ /* Disable interrupts, DMA, and rest of the chip*/
+ saa_writel(SAA7134_IRQ1, 0);
+ saa_writel(SAA7134_IRQ2, 0);
+ saa_writel(SAA7134_MAIN_CTRL, 0);
+
+ pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
+ pci_save_state(pci_dev);
+
+ return 0;
+}
+
+static int saa7134_resume(struct pci_dev *pci_dev)
+{
+
+ struct saa7134_dev *dev = pci_get_drvdata(pci_dev);
+ unsigned int flags;
+
+ pci_restore_state(pci_dev);
+ pci_set_power_state(pci_dev, PCI_D0);
+
+ /* Do things that are done in saa7134_initdev ,
+ except of initializing memory structures.*/
+
+ dev->inresume = 1;
+ saa7134_board_init1(dev);
+
+ if (saa7134_boards[dev->board].video_out)
+ saa7134_videoport_init(dev);
+
+ if (card_has_mpeg(dev))
+ saa7134_ts_init_hw(dev);
+
+ saa7134_hw_enable1(dev);
+ saa7134_set_decoder(dev);
+ saa7134_i2c_call_clients(dev, VIDIOC_S_STD, &dev->tvnorm->id);
+ saa7134_board_init2(dev);
+ saa7134_hw_enable2(dev);
+
+ saa7134_tvaudio_setmute(dev);
+ saa7134_tvaudio_setvolume(dev, dev->ctl_volume);
+ saa7134_enable_i2s(dev);
+
+ /*resume unfinished buffer(s)*/
+ spin_lock_irqsave(&dev->slock, flags);
+ saa7134_buffer_requeue(dev, &dev->video_q);
+ saa7134_buffer_requeue(dev, &dev->vbi_q);
+ saa7134_buffer_requeue(dev, &dev->ts_q);
+
+ /* start DMA now*/
+ dev->inresume = 0;
+ saa7134_set_dmabits(dev);
+ spin_unlock_irqrestore(&dev->slock, flags);
+
+ return 0;
+}
+
/* ----------------------------------------------------------- */
int saa7134_ts_register(struct saa7134_mpeg_ops *ops)
{
- struct list_head *item;
struct saa7134_dev *dev;
mutex_lock(&devlist_lock);
- list_for_each(item,&saa7134_devlist) {
- dev = list_entry(item, struct saa7134_dev, devlist);
+ list_for_each_entry(dev, &saa7134_devlist, devlist)
mpeg_ops_attach(ops, dev);
- }
list_add_tail(&ops->next,&mops_list);
mutex_unlock(&devlist_lock);
return 0;
@@ -1136,15 +1243,12 @@ int saa7134_ts_register(struct saa7134_mpeg_ops *ops)
void saa7134_ts_unregister(struct saa7134_mpeg_ops *ops)
{
- struct list_head *item;
struct saa7134_dev *dev;
mutex_lock(&devlist_lock);
list_del(&ops->next);
- list_for_each(item,&saa7134_devlist) {
- dev = list_entry(item, struct saa7134_dev, devlist);
+ list_for_each_entry(dev, &saa7134_devlist, devlist)
mpeg_ops_detach(ops, dev);
- }
mutex_unlock(&devlist_lock);
}
@@ -1158,6 +1262,8 @@ static struct pci_driver saa7134_pci_driver = {
.id_table = saa7134_pci_tbl,
.probe = saa7134_initdev,
.remove = __devexit_p(saa7134_finidev),
+ .suspend = saa7134_suspend,
+ .resume = saa7134_resume
};
static int saa7134_init(void)
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 1f6bd330071..38d87332cc5 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -567,6 +567,7 @@ static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config
}
/* ------------------------------------------------------------------ */
+
static struct tda1004x_config tda827x_lifeview_config = {
.demod_address = 0x08,
.invert = 1,
@@ -746,6 +747,7 @@ static struct tda1004x_config asus_p7131_hybrid_lna_config = {
.antenna_switch= 2,
.request_firmware = philips_tda1004x_request_firmware
};
+
static struct tda1004x_config kworld_dvb_t_210_config = {
.demod_address = 0x08,
.invert = 1,
@@ -760,6 +762,22 @@ static struct tda1004x_config kworld_dvb_t_210_config = {
.antenna_switch= 1,
.request_firmware = philips_tda1004x_request_firmware
};
+
+static struct tda1004x_config avermedia_super_007_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP01_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x60,
+ .tuner_config = 0,
+ .antenna_switch= 1,
+ .request_firmware = philips_tda1004x_request_firmware
+};
+
/* ------------------------------------------------------------------
* special case: this card uses saa713x GPIO22 for the mode switch
*/
@@ -832,7 +850,7 @@ static int dvb_init(struct saa7134_dev *dev)
dev->ts.nr_bufs = 32;
dev->ts.nr_packets = 32*4;
dev->dvb.name = dev->name;
- videobuf_queue_init(&dev->dvb.dvbq, &saa7134_ts_qops,
+ videobuf_queue_pci_init(&dev->dvb.dvbq, &saa7134_ts_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_ALTERNATE,
@@ -1022,6 +1040,9 @@ static int dvb_init(struct saa7134_dev *dev)
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config);
break;
+ case SAA7134_BOARD_AVERMEDIA_SUPER_007:
+ configure_tda827x_fe(dev, &avermedia_super_007_config);
+ break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index fc260ec8fdc..34ca874dd7f 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -20,7 +20,6 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -77,17 +76,14 @@ static int ts_init_encoder(struct saa7134_dev* dev)
static int ts_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
- struct saa7134_dev *h,*dev = NULL;
- struct list_head *list;
+ struct saa7134_dev *dev;
int err;
- list_for_each(list,&saa7134_devlist) {
- h = list_entry(list, struct saa7134_dev, devlist);
- if (h->empress_dev && h->empress_dev->minor == minor)
- dev = h;
- }
- if (NULL == dev)
- return -ENODEV;
+ list_for_each_entry(dev, &saa7134_devlist, devlist)
+ if (dev->empress_dev && dev->empress_dev->minor == minor)
+ goto found;
+ return -ENODEV;
+ found:
dprintk("open minor=%d\n",minor);
err = -EBUSY;
@@ -401,7 +397,7 @@ static int empress_init(struct saa7134_dev *dev)
printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
dev->name,dev->empress_dev->minor & 0x1f);
- videobuf_queue_init(&dev->empress_tsq, &saa7134_ts_qops,
+ videobuf_queue_pci_init(&dev->empress_tsq, &saa7134_ts_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_ALTERNATE,
diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c
index 1cb8c709ca9..cc87f5855a2 100644
--- a/drivers/media/video/saa7134/saa7134-i2c.c
+++ b/drivers/media/video/saa7134/saa7134-i2c.c
@@ -23,7 +23,6 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 1b6dfd801cc..80d2644f765 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -19,7 +19,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/media/video/saa7134/saa7134-oss.c b/drivers/media/video/saa7134/saa7134-oss.c
index 72444f039e3..aedf04653e0 100644
--- a/drivers/media/video/saa7134/saa7134-oss.c
+++ b/drivers/media/video/saa7134/saa7134-oss.c
@@ -25,7 +25,6 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
@@ -240,17 +239,14 @@ static int dsp_rec_stop(struct saa7134_dev *dev)
static int dsp_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
- struct saa7134_dev *h,*dev = NULL;
- struct list_head *list;
+ struct saa7134_dev *dev;
int err;
- list_for_each(list,&saa7134_devlist) {
- h = list_entry(list, struct saa7134_dev, devlist);
- if (h->dmasound.minor_dsp == minor)
- dev = h;
- }
- if (NULL == dev)
- return -ENODEV;
+ list_for_each_entry(dev, &saa7134_devlist, devlist)
+ if (dev->dmasound.minor_dsp == minor)
+ goto found;
+ return -ENODEV;
+ found:
mutex_lock(&dev->dmasound.lock);
err = -EBUSY;
@@ -681,19 +677,14 @@ mixer_level(struct saa7134_dev *dev, enum saa7134_audio_in src, int level)
static int mixer_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
- struct saa7134_dev *h,*dev = NULL;
- struct list_head *list;
+ struct saa7134_dev *dev;
- list_for_each(list,&saa7134_devlist) {
- h = list_entry(list, struct saa7134_dev, devlist);
- if (h->dmasound.minor_mixer == minor)
- dev = h;
- }
- if (NULL == dev)
- return -ENODEV;
-
- file->private_data = dev;
- return 0;
+ list_for_each_entry(dev, &saa7134_devlist, devlist)
+ if (dev->dmasound.minor_mixer == minor) {
+ file->private_data = dev;
+ return 0;
+ }
+ return -ENODEV;
}
static int mixer_release(struct inode *inode, struct file *file)
@@ -1023,18 +1014,14 @@ static int saa7134_oss_init(void)
static void saa7134_oss_exit(void)
{
- struct saa7134_dev *dev = NULL;
- struct list_head *list;
-
- list_for_each(list,&saa7134_devlist) {
- dev = list_entry(list, struct saa7134_dev, devlist);
+ struct saa7134_dev *dev;
+ list_for_each_entry(dev, &saa7134_devlist, devlist) {
/* Device isn't registered by OSS, probably ALSA's */
if (!dev->dmasound.minor_dsp)
continue;
oss_device_exit(dev);
-
}
saa7134_dmasound_init = NULL;
diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c
index 60a90a2617a..4b63ad3e846 100644
--- a/drivers/media/video/saa7134/saa7134-ts.c
+++ b/drivers/media/video/saa7134/saa7134-ts.c
@@ -23,7 +23,6 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -93,6 +92,8 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
}
if (STATE_NEEDS_INIT == buf->vb.state) {
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+
buf->vb.width = llength;
buf->vb.height = lines;
buf->vb.size = size;
@@ -102,8 +103,8 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
if (err)
goto oops;
err = saa7134_pgtable_build(dev->pci,buf->pt,
- buf->vb.dma.sglist,
- buf->vb.dma.sglen,
+ dma->sglist,
+ dma->sglen,
saa7134_buffer_startpage(buf));
if (err)
goto oops;
@@ -176,6 +177,22 @@ static unsigned int ts_nr_packets = 64;
module_param(ts_nr_packets, int, 0444);
MODULE_PARM_DESC(ts_nr_packets,"size of a ts buffers (in ts packets)");
+int saa7134_ts_init_hw(struct saa7134_dev *dev)
+{
+ /* deactivate TS softreset */
+ saa_writeb(SAA7134_TS_SERIAL1, 0x00);
+ /* TSSOP high active, TSVAL high active, TSLOCK ignored */
+ saa_writeb(SAA7134_TS_PARALLEL, 0xec);
+ saa_writeb(SAA7134_TS_PARALLEL_SERIAL, (TS_PACKET_SIZE-1));
+ saa_writeb(SAA7134_TS_DMA0, ((dev->ts.nr_packets-1)&0xff));
+ saa_writeb(SAA7134_TS_DMA1, (((dev->ts.nr_packets-1)>>8)&0xff));
+ /* TSNOPIT=0, TSCOLAP=0 */
+ saa_writeb(SAA7134_TS_DMA2,
+ ((((dev->ts.nr_packets-1)>>16)&0x3f) | 0x00));
+
+ return 0;
+}
+
int saa7134_ts_init1(struct saa7134_dev *dev)
{
/* sanitycheck insmod options */
@@ -199,12 +216,7 @@ int saa7134_ts_init1(struct saa7134_dev *dev)
saa7134_pgtable_alloc(dev->pci,&dev->ts.pt_ts);
/* init TS hw */
- saa_writeb(SAA7134_TS_SERIAL1, 0x00); /* deactivate TS softreset */
- saa_writeb(SAA7134_TS_PARALLEL, 0xec); /* TSSOP high active, TSVAL high active, TSLOCK ignored */
- saa_writeb(SAA7134_TS_PARALLEL_SERIAL, (TS_PACKET_SIZE-1));
- saa_writeb(SAA7134_TS_DMA0, ((dev->ts.nr_packets-1)&0xff));
- saa_writeb(SAA7134_TS_DMA1, (((dev->ts.nr_packets-1)>>8)&0xff));
- saa_writeb(SAA7134_TS_DMA2, ((((dev->ts.nr_packets-1)>>16)&0x3f) | 0x00)); /* TSNOPIT=0, TSCOLAP=0 */
+ saa7134_ts_init_hw(dev);
return 0;
}
diff --git a/drivers/media/video/saa7134/saa7134-tvaudio.c b/drivers/media/video/saa7134/saa7134-tvaudio.c
index 18b4817b4aa..1b9e39a5ea4 100644
--- a/drivers/media/video/saa7134/saa7134-tvaudio.c
+++ b/drivers/media/video/saa7134/saa7134-tvaudio.c
@@ -23,7 +23,6 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/kthread.h>
#include <linux/slab.h>
@@ -232,7 +231,7 @@ static void mute_input_7134(struct saa7134_dev *dev)
}
if (dev->hw_mute == mute &&
- dev->hw_input == in) {
+ dev->hw_input == in && !dev->inresume) {
dprintk("mute/input: nothing to do [mute=%d,input=%s]\n",
mute,in->name);
return;
@@ -877,7 +876,7 @@ static int tvaudio_thread_ddep(void *data)
/* ------------------------------------------------------------------ */
/* common stuff + external entry points */
-static void saa7134_enable_i2s(struct saa7134_dev *dev)
+void saa7134_enable_i2s(struct saa7134_dev *dev)
{
int i2s_format;
diff --git a/drivers/media/video/saa7134/saa7134-vbi.c b/drivers/media/video/saa7134/saa7134-vbi.c
index f38366a470f..81a2aedeff5 100644
--- a/drivers/media/video/saa7134/saa7134-vbi.c
+++ b/drivers/media/video/saa7134/saa7134-vbi.c
@@ -23,7 +23,6 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -138,6 +137,8 @@ static int buffer_prepare(struct videobuf_queue *q,
saa7134_dma_free(q,buf);
if (STATE_NEEDS_INIT == buf->vb.state) {
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+
buf->vb.width = llength;
buf->vb.height = lines;
buf->vb.size = size;
@@ -147,8 +148,8 @@ static int buffer_prepare(struct videobuf_queue *q,
if (err)
goto oops;
err = saa7134_pgtable_build(dev->pci,buf->pt,
- buf->vb.dma.sglist,
- buf->vb.dma.sglen,
+ dma->sglist,
+ dma->sglen,
saa7134_buffer_startpage(buf));
if (err)
goto oops;
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index 9985ded2095..471b92793c1 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -23,7 +23,6 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/sort.h>
@@ -41,7 +40,7 @@
static unsigned int video_debug = 0;
static unsigned int gbuffers = 8;
-static unsigned int noninterlaced = 1;
+static unsigned int noninterlaced = 0;
static unsigned int gbufsize = 720*576*4;
static unsigned int gbufsize_max = 720*576*4;
static char secam[] = "--";
@@ -541,22 +540,12 @@ void res_free(struct saa7134_dev *dev, struct saa7134_fh *fh, unsigned int bits)
/* ------------------------------------------------------------------ */
-static void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm)
+void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm)
{
- int luma_control,sync_control,mux;
dprintk("set tv norm = %s\n",norm->name);
dev->tvnorm = norm;
- mux = card_in(dev,dev->ctl_input).vmux;
- luma_control = norm->luma_control;
- sync_control = norm->sync_control;
-
- if (mux > 5)
- luma_control |= 0x80; /* svideo */
- if (noninterlaced || dev->nosignal)
- sync_control |= 0x20;
-
/* setup cropping */
dev->crop_bounds.left = norm->h_start;
dev->crop_defrect.left = norm->h_start;
@@ -571,6 +560,40 @@ static void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm)
dev->crop_current = dev->crop_defrect;
+ saa7134_set_decoder(dev);
+
+ if (card_in(dev, dev->ctl_input).tv) {
+ if ((card(dev).tuner_type == TUNER_PHILIPS_TDA8290)
+ && ((card(dev).tuner_config == 1)
+ || (card(dev).tuner_config == 2)))
+ saa7134_set_gpio(dev, 22, 5);
+ saa7134_i2c_call_clients(dev, VIDIOC_S_STD, &norm->id);
+ }
+}
+
+static void video_mux(struct saa7134_dev *dev, int input)
+{
+ dprintk("video input = %d [%s]\n", input, card_in(dev, input).name);
+ dev->ctl_input = input;
+ set_tvnorm(dev, dev->tvnorm);
+ saa7134_tvaudio_setinput(dev, &card_in(dev, input));
+}
+
+void saa7134_set_decoder(struct saa7134_dev *dev)
+{
+ int luma_control, sync_control, mux;
+
+ struct saa7134_tvnorm *norm = dev->tvnorm;
+ mux = card_in(dev, dev->ctl_input).vmux;
+
+ luma_control = norm->luma_control;
+ sync_control = norm->sync_control;
+
+ if (mux > 5)
+ luma_control |= 0x80; /* svideo */
+ if (noninterlaced || dev->nosignal)
+ sync_control |= 0x20;
+
/* setup video decoder */
saa_writeb(SAA7134_INCR_DELAY, 0x08);
saa_writeb(SAA7134_ANALOG_IN_CTRL1, 0xc0 | mux);
@@ -585,9 +608,13 @@ static void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm)
saa_writeb(SAA7134_SYNC_CTRL, sync_control);
saa_writeb(SAA7134_LUMA_CTRL, luma_control);
saa_writeb(SAA7134_DEC_LUMA_BRIGHT, dev->ctl_bright);
- saa_writeb(SAA7134_DEC_LUMA_CONTRAST, dev->ctl_contrast);
- saa_writeb(SAA7134_DEC_CHROMA_SATURATION, dev->ctl_saturation);
+ saa_writeb(SAA7134_DEC_LUMA_CONTRAST,
+ dev->ctl_invert ? -dev->ctl_contrast : dev->ctl_contrast);
+
+ saa_writeb(SAA7134_DEC_CHROMA_SATURATION,
+ dev->ctl_invert ? -dev->ctl_saturation : dev->ctl_saturation);
+
saa_writeb(SAA7134_DEC_CHROMA_HUE, dev->ctl_hue);
saa_writeb(SAA7134_CHROMA_CTRL1, norm->chroma_ctrl1);
saa_writeb(SAA7134_CHROMA_GAIN, norm->chroma_gain);
@@ -601,23 +628,6 @@ static void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm)
saa_writeb(SAA7134_MISC_VGATE_MSB, norm->vgate_misc);
saa_writeb(SAA7134_RAW_DATA_GAIN, 0x40);
saa_writeb(SAA7134_RAW_DATA_OFFSET, 0x80);
-
- /* only tell the tuner if this is a tv input */
- if (card_in(dev,dev->ctl_input).tv) {
- if ((card(dev).tuner_type == TUNER_PHILIPS_TDA8290)
- && ((card(dev).tuner_config == 1)
- || (card(dev).tuner_config == 2)))
- saa7134_set_gpio(dev, 22, 5);
- saa7134_i2c_call_clients(dev,VIDIOC_S_STD,&norm->id);
- }
-}
-
-static void video_mux(struct saa7134_dev *dev, int input)
-{
- dprintk("video input = %d [%s]\n",input,card_in(dev,input).name);
- dev->ctl_input = input;
- set_tvnorm(dev,dev->tvnorm);
- saa7134_tvaudio_setinput(dev,&card_in(dev,input));
}
static void set_h_prescale(struct saa7134_dev *dev, int task, int prescale)
@@ -1038,6 +1048,8 @@ static int buffer_prepare(struct videobuf_queue *q,
}
if (STATE_NEEDS_INIT == buf->vb.state) {
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+
buf->vb.width = fh->width;
buf->vb.height = fh->height;
buf->vb.size = size;
@@ -1049,8 +1061,8 @@ static int buffer_prepare(struct videobuf_queue *q,
if (err)
goto oops;
err = saa7134_pgtable_build(dev->pci,buf->pt,
- buf->vb.dma.sglist,
- buf->vb.dma.sglen,
+ dma->sglist,
+ dma->sglen,
saa7134_buffer_startpage(buf));
if (err)
goto oops;
@@ -1273,26 +1285,24 @@ static int saa7134_resource(struct saa7134_fh *fh)
static int video_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
- struct saa7134_dev *h,*dev = NULL;
+ struct saa7134_dev *dev;
struct saa7134_fh *fh;
- struct list_head *list;
enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
int radio = 0;
- list_for_each(list,&saa7134_devlist) {
- h = list_entry(list, struct saa7134_dev, devlist);
- if (h->video_dev && (h->video_dev->minor == minor))
- dev = h;
- if (h->radio_dev && (h->radio_dev->minor == minor)) {
+ list_for_each_entry(dev, &saa7134_devlist, devlist) {
+ if (dev->video_dev && (dev->video_dev->minor == minor))
+ goto found;
+ if (dev->radio_dev && (dev->radio_dev->minor == minor)) {
radio = 1;
- dev = h;
+ goto found;
}
- if (h->vbi_dev && (h->vbi_dev->minor == minor)) {
+ if (dev->vbi_dev && (dev->vbi_dev->minor == minor)) {
type = V4L2_BUF_TYPE_VBI_CAPTURE;
- dev = h;
+ goto found;
}
}
- if (NULL == dev)
- return -ENODEV;
+ return -ENODEV;
+ found:
dprintk("open minor=%d radio=%d type=%s\n",minor,radio,
v4l2_type_names[type]);
@@ -1310,13 +1320,13 @@ static int video_open(struct inode *inode, struct file *file)
fh->height = 576;
v4l2_prio_open(&dev->prio,&fh->prio);
- videobuf_queue_init(&fh->cap, &video_qops,
+ videobuf_queue_pci_init(&fh->cap, &video_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
sizeof(struct saa7134_buf),
fh);
- videobuf_queue_init(&fh->vbi, &saa7134_vbi_qops,
+ videobuf_queue_pci_init(&fh->vbi, &saa7134_vbi_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VBI_CAPTURE,
V4L2_FIELD_SEQ_TB,
@@ -1833,7 +1843,11 @@ static int video_do_ioctl(struct inode *inode, struct file *file,
if (res_check(fh, RESOURCE_OVERLAY)) {
spin_lock_irqsave(&dev->slock,flags);
stop_preview(dev,fh);
+ spin_unlock_irqrestore(&dev->slock, flags);
+
set_tvnorm(dev,&tvnorms[i]);
+
+ spin_lock_irqsave(&dev->slock, flags);
start_preview(dev,fh);
spin_unlock_irqrestore(&dev->slock,flags);
} else
@@ -2138,29 +2152,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file,
}
#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGMBUF:
- {
- struct video_mbuf *mbuf = arg;
- struct videobuf_queue *q;
- struct v4l2_requestbuffers req;
- unsigned int i;
-
- q = saa7134_queue(fh);
- memset(&req,0,sizeof(req));
- req.type = q->type;
- req.count = gbuffers;
- req.memory = V4L2_MEMORY_MMAP;
- err = videobuf_reqbufs(q,&req);
- if (err < 0)
- return err;
- memset(mbuf,0,sizeof(*mbuf));
- mbuf->frames = req.count;
- mbuf->size = 0;
- for (i = 0; i < mbuf->frames; i++) {
- mbuf->offsets[i] = q->bufs[i]->boff;
- mbuf->size += q->bufs[i]->bsize;
- }
- return 0;
- }
+ return videobuf_cgmbuf(saa7134_queue(fh), arg, gbuffers);
#endif
case VIDIOC_REQBUFS:
return videobuf_reqbufs(saa7134_queue(fh),arg);
@@ -2412,34 +2404,40 @@ int saa7134_video_init1(struct saa7134_dev *dev)
dev->video_q.timeout.data = (unsigned long)(&dev->video_q);
dev->video_q.dev = dev;
- if (saa7134_boards[dev->board].video_out) {
- /* enable video output */
- int vo = saa7134_boards[dev->board].video_out;
- int video_reg;
- unsigned int vid_port_opts = saa7134_boards[dev->board].vid_port_opts;
- saa_writeb(SAA7134_VIDEO_PORT_CTRL0, video_out[vo][0]);
- video_reg = video_out[vo][1];
- if (vid_port_opts & SET_T_CODE_POLARITY_NON_INVERTED)
- video_reg &= ~VP_T_CODE_P_INVERTED;
- saa_writeb(SAA7134_VIDEO_PORT_CTRL1, video_reg);
- saa_writeb(SAA7134_VIDEO_PORT_CTRL2, video_out[vo][2]);
- saa_writeb(SAA7134_VIDEO_PORT_CTRL3, video_out[vo][3]);
- saa_writeb(SAA7134_VIDEO_PORT_CTRL4, video_out[vo][4]);
- video_reg = video_out[vo][5];
- if (vid_port_opts & SET_CLOCK_NOT_DELAYED)
- video_reg &= ~VP_CLK_CTRL2_DELAYED;
- if (vid_port_opts & SET_CLOCK_INVERTED)
- video_reg |= VP_CLK_CTRL1_INVERTED;
- saa_writeb(SAA7134_VIDEO_PORT_CTRL5, video_reg);
- video_reg = video_out[vo][6];
- if (vid_port_opts & SET_VSYNC_OFF) {
- video_reg &= ~VP_VS_TYPE_MASK;
- video_reg |= VP_VS_TYPE_OFF;
- }
- saa_writeb(SAA7134_VIDEO_PORT_CTRL6, video_reg);
- saa_writeb(SAA7134_VIDEO_PORT_CTRL7, video_out[vo][7]);
- saa_writeb(SAA7134_VIDEO_PORT_CTRL8, video_out[vo][8]);
- }
+ if (saa7134_boards[dev->board].video_out)
+ saa7134_videoport_init(dev);
+
+ return 0;
+}
+
+int saa7134_videoport_init(struct saa7134_dev *dev)
+{
+ /* enable video output */
+ int vo = saa7134_boards[dev->board].video_out;
+ int video_reg;
+ unsigned int vid_port_opts = saa7134_boards[dev->board].vid_port_opts;
+ saa_writeb(SAA7134_VIDEO_PORT_CTRL0, video_out[vo][0]);
+ video_reg = video_out[vo][1];
+ if (vid_port_opts & SET_T_CODE_POLARITY_NON_INVERTED)
+ video_reg &= ~VP_T_CODE_P_INVERTED;
+ saa_writeb(SAA7134_VIDEO_PORT_CTRL1, video_reg);
+ saa_writeb(SAA7134_VIDEO_PORT_CTRL2, video_out[vo][2]);
+ saa_writeb(SAA7134_VIDEO_PORT_CTRL3, video_out[vo][3]);
+ saa_writeb(SAA7134_VIDEO_PORT_CTRL4, video_out[vo][4]);
+ video_reg = video_out[vo][5];
+ if (vid_port_opts & SET_CLOCK_NOT_DELAYED)
+ video_reg &= ~VP_CLK_CTRL2_DELAYED;
+ if (vid_port_opts & SET_CLOCK_INVERTED)
+ video_reg |= VP_CLK_CTRL1_INVERTED;
+ saa_writeb(SAA7134_VIDEO_PORT_CTRL5, video_reg);
+ video_reg = video_out[vo][6];
+ if (vid_port_opts & SET_VSYNC_OFF) {
+ video_reg &= ~VP_VS_TYPE_MASK;
+ video_reg |= VP_VS_TYPE_OFF;
+ }
+ saa_writeb(SAA7134_VIDEO_PORT_CTRL6, video_reg);
+ saa_writeb(SAA7134_VIDEO_PORT_CTRL7, video_out[vo][7]);
+ saa_writeb(SAA7134_VIDEO_PORT_CTRL8, video_out[vo][8]);
return 0;
}
@@ -2454,7 +2452,7 @@ int saa7134_video_init2(struct saa7134_dev *dev)
return 0;
}
-void saa7134_irq_video_intl(struct saa7134_dev *dev)
+void saa7134_irq_video_signalchange(struct saa7134_dev *dev)
{
static const char *st[] = {
"(no signal)", "NTSC", "PAL", "SECAM" };
@@ -2466,24 +2464,28 @@ void saa7134_irq_video_intl(struct saa7134_dev *dev)
(st1 & 0x40) ? "not locked" : "locked",
(st2 & 0x40) ? "no" : "yes",
st[st1 & 0x03]);
- dev->nosignal = (st1 & 0x40) || (st2 & 0x40);
+ dev->nosignal = (st1 & 0x40) || (st2 & 0x40) || !(st2 & 0x1);
if (dev->nosignal) {
/* no video signal -> mute audio */
if (dev->ctl_automute)
dev->automute = 1;
saa7134_tvaudio_setmute(dev);
- saa_setb(SAA7134_SYNC_CTRL, 0x20);
} else {
/* wake up tvaudio audio carrier scan thread */
saa7134_tvaudio_do_scan(dev);
- if (!noninterlaced)
- saa_clearb(SAA7134_SYNC_CTRL, 0x20);
}
+
+ if ((st2 & 0x80) && !noninterlaced && !dev->nosignal)
+ saa_clearb(SAA7134_SYNC_CTRL, 0x20);
+ else
+ saa_setb(SAA7134_SYNC_CTRL, 0x20);
+
if (dev->mops && dev->mops->signal_change)
dev->mops->signal_change(dev);
}
+
void saa7134_irq_video_done(struct saa7134_dev *dev, unsigned long status)
{
enum v4l2_field field;
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 346255468da..28ec6804bd5 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -37,12 +37,12 @@
#include <media/tuner.h>
#include <media/ir-common.h>
#include <media/ir-kbd-i2c.h>
-#include <media/video-buf.h>
+#include <media/videobuf-dma-sg.h>
#include <sound/driver.h>
#include <sound/core.h>
#include <sound/pcm.h>
-#if defined(CONFIG_VIDEO_BUF_DVB) || defined(CONFIG_VIDEO_BUF_DVB_MODULE)
-#include <media/video-buf-dvb.h>
+#if defined(CONFIG_VIDEO_SAA7134_DVB) || defined(CONFIG_VIDEO_SAA7134_DVB_MODULE)
+#include <media/videobuf-dvb.h>
#endif
#define UNSET (-1U)
@@ -239,6 +239,7 @@ struct saa7134_format {
#define SAA7134_BOARD_KWORLD_DVBT_210 114
#define SAA7134_BOARD_SABRENT_TV_PCB05 115
#define SAA7134_BOARD_10MOONSTVMASTER3 116
+#define SAA7134_BOARD_AVERMEDIA_SUPER_007 117
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
@@ -523,6 +524,7 @@ struct saa7134_dev {
unsigned int hw_mute;
int last_carrier;
int nosignal;
+ unsigned int inresume;
/* SAA7134_MPEG_* */
struct saa7134_ts ts;
@@ -536,7 +538,7 @@ struct saa7134_dev {
struct work_struct empress_workqueue;
int empress_started;
-#if defined(CONFIG_VIDEO_BUF_DVB) || defined(CONFIG_VIDEO_BUF_DVB_MODULE)
+#if defined(CONFIG_VIDEO_SAA7134_DVB) || defined(CONFIG_VIDEO_SAA7134_DVB_MODULE)
/* SAA7134_MPEG_DVB only */
struct videobuf_dvb dvb;
int (*original_demod_sleep)(struct dvb_frontend* fe);
@@ -593,6 +595,9 @@ void saa7134_buffer_next(struct saa7134_dev *dev, struct saa7134_dmaqueue *q);
void saa7134_buffer_timeout(unsigned long data);
void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf);
+int saa7134_buffer_requeue(struct saa7134_dev *dev,
+ struct saa7134_dmaqueue *q);
+
int saa7134_set_dmabits(struct saa7134_dev *dev);
extern int (*saa7134_dmasound_init)(struct saa7134_dev *dev);
@@ -625,12 +630,16 @@ void saa7134_i2c_call_clients(struct saa7134_dev *dev,
extern struct video_device saa7134_video_template;
extern struct video_device saa7134_radio_template;
+void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm);
+int saa7134_videoport_init(struct saa7134_dev *dev);
+void saa7134_set_decoder(struct saa7134_dev *dev);
+
int saa7134_common_ioctl(struct saa7134_dev *dev,
unsigned int cmd, void *arg);
int saa7134_video_init1(struct saa7134_dev *dev);
int saa7134_video_init2(struct saa7134_dev *dev);
-void saa7134_irq_video_intl(struct saa7134_dev *dev);
+void saa7134_irq_video_signalchange(struct saa7134_dev *dev);
void saa7134_irq_video_done(struct saa7134_dev *dev, unsigned long status);
@@ -648,6 +657,8 @@ void saa7134_irq_ts_done(struct saa7134_dev *dev, unsigned long status);
int saa7134_ts_register(struct saa7134_mpeg_ops *ops);
void saa7134_ts_unregister(struct saa7134_mpeg_ops *ops);
+int saa7134_ts_init_hw(struct saa7134_dev *dev);
+
/* ----------------------------------------------------------- */
/* saa7134-vbi.c */
@@ -676,6 +687,8 @@ int saa7134_tvaudio_do_scan(struct saa7134_dev *dev);
int saa_dsp_writel(struct saa7134_dev *dev, int reg, u32 value);
+void saa7134_enable_i2s(struct saa7134_dev *dev);
+
/* ----------------------------------------------------------- */
/* saa7134-oss.c */
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 36d8a455e0e..6991e06f765 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -22,7 +22,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/param.h>
-#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/device.h>
@@ -1030,7 +1029,8 @@ static u16 sn9c102_strtou16(const char* buff, size_t len, ssize_t* count)
NOTE 2: buffers are PAGE_SIZE long
*/
-static ssize_t sn9c102_show_reg(struct class_device* cd, char* buf)
+static ssize_t sn9c102_show_reg(struct device* cd,
+ struct device_attribute *attr, char* buf)
{
struct sn9c102_device* cam;
ssize_t count;
@@ -1054,7 +1054,8 @@ static ssize_t sn9c102_show_reg(struct class_device* cd, char* buf)
static ssize_t
-sn9c102_store_reg(struct class_device* cd, const char* buf, size_t len)
+sn9c102_store_reg(struct device* cd, struct device_attribute *attr,
+ const char* buf, size_t len)
{
struct sn9c102_device* cam;
u16 index;
@@ -1087,7 +1088,8 @@ sn9c102_store_reg(struct class_device* cd, const char* buf, size_t len)
}
-static ssize_t sn9c102_show_val(struct class_device* cd, char* buf)
+static ssize_t sn9c102_show_val(struct device* cd,
+ struct device_attribute *attr, char* buf)
{
struct sn9c102_device* cam;
ssize_t count;
@@ -1119,7 +1121,8 @@ static ssize_t sn9c102_show_val(struct class_device* cd, char* buf)
static ssize_t
-sn9c102_store_val(struct class_device* cd, const char* buf, size_t len)
+sn9c102_store_val(struct device* cd, struct device_attribute *attr,
+ const char* buf, size_t len)
{
struct sn9c102_device* cam;
u16 value;
@@ -1158,7 +1161,8 @@ sn9c102_store_val(struct class_device* cd, const char* buf, size_t len)
}
-static ssize_t sn9c102_show_i2c_reg(struct class_device* cd, char* buf)
+static ssize_t sn9c102_show_i2c_reg(struct device* cd,
+ struct device_attribute *attr, char* buf)
{
struct sn9c102_device* cam;
ssize_t count;
@@ -1184,7 +1188,8 @@ static ssize_t sn9c102_show_i2c_reg(struct class_device* cd, char* buf)
static ssize_t
-sn9c102_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
+sn9c102_store_i2c_reg(struct device* cd, struct device_attribute *attr,
+ const char* buf, size_t len)
{
struct sn9c102_device* cam;
u16 index;
@@ -1217,7 +1222,8 @@ sn9c102_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
}
-static ssize_t sn9c102_show_i2c_val(struct class_device* cd, char* buf)
+static ssize_t sn9c102_show_i2c_val(struct device* cd,
+ struct device_attribute *attr, char* buf)
{
struct sn9c102_device* cam;
ssize_t count;
@@ -1254,7 +1260,8 @@ static ssize_t sn9c102_show_i2c_val(struct class_device* cd, char* buf)
static ssize_t
-sn9c102_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
+sn9c102_store_i2c_val(struct device* cd, struct device_attribute *attr,
+ const char* buf, size_t len)
{
struct sn9c102_device* cam;
u16 value;
@@ -1299,7 +1306,8 @@ sn9c102_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
static ssize_t
-sn9c102_store_green(struct class_device* cd, const char* buf, size_t len)
+sn9c102_store_green(struct device* cd, struct device_attribute *attr,
+ const char* buf, size_t len)
{
struct sn9c102_device* cam;
enum sn9c102_bridge bridge;
@@ -1330,16 +1338,16 @@ sn9c102_store_green(struct class_device* cd, const char* buf, size_t len)
case BRIDGE_SN9C102:
if (value > 0x0f)
return -EINVAL;
- if ((res = sn9c102_store_reg(cd, "0x11", 4)) >= 0)
- res = sn9c102_store_val(cd, buf, len);
+ if ((res = sn9c102_store_reg(cd, attr, "0x11", 4)) >= 0)
+ res = sn9c102_store_val(cd, attr, buf, len);
break;
case BRIDGE_SN9C103:
case BRIDGE_SN9C105:
case BRIDGE_SN9C120:
if (value > 0x7f)
return -EINVAL;
- if ((res = sn9c102_store_reg(cd, "0x07", 4)) >= 0)
- res = sn9c102_store_val(cd, buf, len);
+ if ((res = sn9c102_store_reg(cd, attr, "0x07", 4)) >= 0)
+ res = sn9c102_store_val(cd, attr, buf, len);
break;
}
@@ -1348,7 +1356,8 @@ sn9c102_store_green(struct class_device* cd, const char* buf, size_t len)
static ssize_t
-sn9c102_store_blue(struct class_device* cd, const char* buf, size_t len)
+sn9c102_store_blue(struct device* cd, struct device_attribute *attr,
+ const char* buf, size_t len)
{
ssize_t res = 0;
u16 value;
@@ -1358,15 +1367,16 @@ sn9c102_store_blue(struct class_device* cd, const char* buf, size_t len)
if (!count || value > 0x7f)
return -EINVAL;
- if ((res = sn9c102_store_reg(cd, "0x06", 4)) >= 0)
- res = sn9c102_store_val(cd, buf, len);
+ if ((res = sn9c102_store_reg(cd, attr, "0x06", 4)) >= 0)
+ res = sn9c102_store_val(cd, attr, buf, len);
return res;
}
static ssize_t
-sn9c102_store_red(struct class_device* cd, const char* buf, size_t len)
+sn9c102_store_red(struct device* cd, struct device_attribute *attr,
+ const char* buf, size_t len)
{
ssize_t res = 0;
u16 value;
@@ -1376,14 +1386,16 @@ sn9c102_store_red(struct class_device* cd, const char* buf, size_t len)
if (!count || value > 0x7f)
return -EINVAL;
- if ((res = sn9c102_store_reg(cd, "0x05", 4)) >= 0)
- res = sn9c102_store_val(cd, buf, len);
+ if ((res = sn9c102_store_reg(cd, attr, "0x05", 4)) >= 0)
+ res = sn9c102_store_val(cd, attr, buf, len);
return res;
}
-static ssize_t sn9c102_show_frame_header(struct class_device* cd, char* buf)
+static ssize_t sn9c102_show_frame_header(struct device* cd,
+ struct device_attribute *attr,
+ char* buf)
{
struct sn9c102_device* cam;
ssize_t count;
@@ -1402,72 +1414,63 @@ static ssize_t sn9c102_show_frame_header(struct class_device* cd, char* buf)
}
-static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR,
- sn9c102_show_reg, sn9c102_store_reg);
-static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR,
- sn9c102_show_val, sn9c102_store_val);
-static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR,
- sn9c102_show_i2c_reg, sn9c102_store_i2c_reg);
-static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
- sn9c102_show_i2c_val, sn9c102_store_i2c_val);
-static CLASS_DEVICE_ATTR(green, S_IWUGO, NULL, sn9c102_store_green);
-static CLASS_DEVICE_ATTR(blue, S_IWUGO, NULL, sn9c102_store_blue);
-static CLASS_DEVICE_ATTR(red, S_IWUGO, NULL, sn9c102_store_red);
-static CLASS_DEVICE_ATTR(frame_header, S_IRUGO,
- sn9c102_show_frame_header, NULL);
+static DEVICE_ATTR(reg, S_IRUGO | S_IWUSR, sn9c102_show_reg, sn9c102_store_reg);
+static DEVICE_ATTR(val, S_IRUGO | S_IWUSR, sn9c102_show_val, sn9c102_store_val);
+static DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR,
+ sn9c102_show_i2c_reg, sn9c102_store_i2c_reg);
+static DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
+ sn9c102_show_i2c_val, sn9c102_store_i2c_val);
+static DEVICE_ATTR(green, S_IWUGO, NULL, sn9c102_store_green);
+static DEVICE_ATTR(blue, S_IWUGO, NULL, sn9c102_store_blue);
+static DEVICE_ATTR(red, S_IWUGO, NULL, sn9c102_store_red);
+static DEVICE_ATTR(frame_header, S_IRUGO, sn9c102_show_frame_header, NULL);
static int sn9c102_create_sysfs(struct sn9c102_device* cam)
{
- struct class_device *classdev = &(cam->v4ldev->class_dev);
+ struct device *classdev = &(cam->v4ldev->class_dev);
int err = 0;
- if ((err = class_device_create_file(classdev, &class_device_attr_reg)))
+ if ((err = device_create_file(classdev, &dev_attr_reg)))
goto err_out;
- if ((err = class_device_create_file(classdev, &class_device_attr_val)))
+ if ((err = device_create_file(classdev, &dev_attr_val)))
goto err_reg;
- if ((err = class_device_create_file(classdev,
- &class_device_attr_frame_header)))
+ if ((err = device_create_file(classdev, &dev_attr_frame_header)))
goto err_val;
if (cam->sensor.sysfs_ops) {
- if ((err = class_device_create_file(classdev,
- &class_device_attr_i2c_reg)))
+ if ((err = device_create_file(classdev, &dev_attr_i2c_reg)))
goto err_frame_header;
- if ((err = class_device_create_file(classdev,
- &class_device_attr_i2c_val)))
+ if ((err = device_create_file(classdev, &dev_attr_i2c_val)))
goto err_i2c_reg;
}
if (cam->bridge == BRIDGE_SN9C101 || cam->bridge == BRIDGE_SN9C102) {
- if ((err = class_device_create_file(classdev,
- &class_device_attr_green)))
+ if ((err = device_create_file(classdev, &dev_attr_green)))
goto err_i2c_val;
} else {
- if ((err = class_device_create_file(classdev,
- &class_device_attr_blue)))
+ if ((err = device_create_file(classdev, &dev_attr_blue)))
goto err_i2c_val;
- if ((err = class_device_create_file(classdev,
- &class_device_attr_red)))
+ if ((err = device_create_file(classdev, &dev_attr_red)))
goto err_blue;
}
return 0;
err_blue:
- class_device_remove_file(classdev, &class_device_attr_blue);
+ device_remove_file(classdev, &dev_attr_blue);
err_i2c_val:
if (cam->sensor.sysfs_ops)
- class_device_remove_file(classdev, &class_device_attr_i2c_val);
+ device_remove_file(classdev, &dev_attr_i2c_val);
err_i2c_reg:
if (cam->sensor.sysfs_ops)
- class_device_remove_file(classdev, &class_device_attr_i2c_reg);
+ device_remove_file(classdev, &dev_attr_i2c_reg);
err_frame_header:
- class_device_remove_file(classdev, &class_device_attr_frame_header);
+ device_remove_file(classdev, &dev_attr_frame_header);
err_val:
- class_device_remove_file(classdev, &class_device_attr_val);
+ device_remove_file(classdev, &dev_attr_val);
err_reg:
- class_device_remove_file(classdev, &class_device_attr_reg);
+ device_remove_file(classdev, &dev_attr_reg);
err_out:
return err;
}
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index 4dc5bc714b9..9e009a7ab86 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -499,13 +499,14 @@ exit:
* sysfs
***************************************************************************/
#define stv680_file(name, variable, field) \
-static ssize_t show_##name(struct class_device *class_dev, char *buf) \
+static ssize_t show_##name(struct device *class_dev, \
+ struct device_attribute *attr, char *buf) \
{ \
struct video_device *vdev = to_video_device(class_dev); \
struct usb_stv *stv = video_get_drvdata(vdev); \
return sprintf(buf, field, stv->variable); \
} \
-static CLASS_DEVICE_ATTR(name, S_IRUGO, show_##name, NULL);
+static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL);
stv680_file(model, camera_name, "%s\n");
stv680_file(in_use, user, "%d\n");
@@ -520,53 +521,53 @@ static int stv680_create_sysfs_files(struct video_device *vdev)
{
int rc;
- rc = video_device_create_file(vdev, &class_device_attr_model);
+ rc = video_device_create_file(vdev, &dev_attr_model);
if (rc) goto err;
- rc = video_device_create_file(vdev, &class_device_attr_in_use);
+ rc = video_device_create_file(vdev, &dev_attr_in_use);
if (rc) goto err_model;
- rc = video_device_create_file(vdev, &class_device_attr_streaming);
+ rc = video_device_create_file(vdev, &dev_attr_streaming);
if (rc) goto err_inuse;
- rc = video_device_create_file(vdev, &class_device_attr_palette);
+ rc = video_device_create_file(vdev, &dev_attr_palette);
if (rc) goto err_stream;
- rc = video_device_create_file(vdev, &class_device_attr_frames_total);
+ rc = video_device_create_file(vdev, &dev_attr_frames_total);
if (rc) goto err_pal;
- rc = video_device_create_file(vdev, &class_device_attr_frames_read);
+ rc = video_device_create_file(vdev, &dev_attr_frames_read);
if (rc) goto err_framtot;
- rc = video_device_create_file(vdev, &class_device_attr_packets_dropped);
+ rc = video_device_create_file(vdev, &dev_attr_packets_dropped);
if (rc) goto err_framread;
- rc = video_device_create_file(vdev, &class_device_attr_decoding_errors);
+ rc = video_device_create_file(vdev, &dev_attr_decoding_errors);
if (rc) goto err_dropped;
return 0;
err_dropped:
- video_device_remove_file(vdev, &class_device_attr_packets_dropped);
+ video_device_remove_file(vdev, &dev_attr_packets_dropped);
err_framread:
- video_device_remove_file(vdev, &class_device_attr_frames_read);
+ video_device_remove_file(vdev, &dev_attr_frames_read);
err_framtot:
- video_device_remove_file(vdev, &class_device_attr_frames_total);
+ video_device_remove_file(vdev, &dev_attr_frames_total);
err_pal:
- video_device_remove_file(vdev, &class_device_attr_palette);
+ video_device_remove_file(vdev, &dev_attr_palette);
err_stream:
- video_device_remove_file(vdev, &class_device_attr_streaming);
+ video_device_remove_file(vdev, &dev_attr_streaming);
err_inuse:
- video_device_remove_file(vdev, &class_device_attr_in_use);
+ video_device_remove_file(vdev, &dev_attr_in_use);
err_model:
- video_device_remove_file(vdev, &class_device_attr_model);
+ video_device_remove_file(vdev, &dev_attr_model);
err:
return rc;
}
static void stv680_remove_sysfs_files(struct video_device *vdev)
{
- video_device_remove_file(vdev, &class_device_attr_model);
- video_device_remove_file(vdev, &class_device_attr_in_use);
- video_device_remove_file(vdev, &class_device_attr_streaming);
- video_device_remove_file(vdev, &class_device_attr_palette);
- video_device_remove_file(vdev, &class_device_attr_frames_total);
- video_device_remove_file(vdev, &class_device_attr_frames_read);
- video_device_remove_file(vdev, &class_device_attr_packets_dropped);
- video_device_remove_file(vdev, &class_device_attr_decoding_errors);
+ video_device_remove_file(vdev, &dev_attr_model);
+ video_device_remove_file(vdev, &dev_attr_in_use);
+ video_device_remove_file(vdev, &dev_attr_streaming);
+ video_device_remove_file(vdev, &dev_attr_palette);
+ video_device_remove_file(vdev, &dev_attr_frames_total);
+ video_device_remove_file(vdev, &dev_attr_frames_read);
+ video_device_remove_file(vdev, &dev_attr_packets_dropped);
+ video_device_remove_file(vdev, &dev_attr_decoding_errors);
}
/********************************************************************
diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c
new file mode 100644
index 00000000000..41cd6a0b048
--- /dev/null
+++ b/drivers/media/video/tcm825x.c
@@ -0,0 +1,928 @@
+/*
+ * drivers/media/video/tcm825x.c
+ *
+ * TCM825X camera sensor driver.
+ *
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * Contact: Sakari Ailus <sakari.ailus@nokia.com>
+ *
+ * Based on code from David Cohen <david.cohen@indt.org.br>
+ *
+ * This driver was based on ov9640 sensor driver from MontaVista
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/i2c.h>
+#include <media/v4l2-int-device.h>
+
+#include "tcm825x.h"
+
+/*
+ * The sensor has two fps modes: the lower one just gives half the fps
+ * at the same xclk than the high one.
+ */
+#define MAX_FPS 30
+#define MIN_FPS 8
+#define MAX_HALF_FPS (MAX_FPS / 2)
+#define HIGH_FPS_MODE_LOWER_LIMIT 14
+#define DEFAULT_FPS MAX_HALF_FPS
+
+struct tcm825x_sensor {
+ const struct tcm825x_platform_data *platform_data;
+ struct v4l2_int_device *v4l2_int_device;
+ struct i2c_client *i2c_client;
+ struct v4l2_pix_format pix;
+ struct v4l2_fract timeperframe;
+};
+
+/* list of image formats supported by TCM825X sensor */
+const static struct v4l2_fmtdesc tcm825x_formats[] = {
+ {
+ .description = "YUYV (YUV 4:2:2), packed",
+ .pixelformat = V4L2_PIX_FMT_UYVY,
+ }, {
+ /* Note: V4L2 defines RGB565 as:
+ *
+ * Byte 0 Byte 1
+ * g2 g1 g0 r4 r3 r2 r1 r0 b4 b3 b2 b1 b0 g5 g4 g3
+ *
+ * We interpret RGB565 as:
+ *
+ * Byte 0 Byte 1
+ * g2 g1 g0 b4 b3 b2 b1 b0 r4 r3 r2 r1 r0 g5 g4 g3
+ */
+ .description = "RGB565, le",
+ .pixelformat = V4L2_PIX_FMT_RGB565,
+ },
+};
+
+#define TCM825X_NUM_CAPTURE_FORMATS ARRAY_SIZE(tcm825x_formats)
+
+/*
+ * TCM825X register configuration for all combinations of pixel format and
+ * image size
+ */
+const static struct tcm825x_reg subqcif = { 0x20, TCM825X_PICSIZ };
+const static struct tcm825x_reg qcif = { 0x18, TCM825X_PICSIZ };
+const static struct tcm825x_reg cif = { 0x14, TCM825X_PICSIZ };
+const static struct tcm825x_reg qqvga = { 0x0c, TCM825X_PICSIZ };
+const static struct tcm825x_reg qvga = { 0x04, TCM825X_PICSIZ };
+const static struct tcm825x_reg vga = { 0x00, TCM825X_PICSIZ };
+
+const static struct tcm825x_reg yuv422 = { 0x00, TCM825X_PICFMT };
+const static struct tcm825x_reg rgb565 = { 0x02, TCM825X_PICFMT };
+
+/* Our own specific controls */
+#define V4L2_CID_ALC V4L2_CID_PRIVATE_BASE
+#define V4L2_CID_H_EDGE_EN V4L2_CID_PRIVATE_BASE + 1
+#define V4L2_CID_V_EDGE_EN V4L2_CID_PRIVATE_BASE + 2
+#define V4L2_CID_LENS V4L2_CID_PRIVATE_BASE + 3
+#define V4L2_CID_MAX_EXPOSURE_TIME V4L2_CID_PRIVATE_BASE + 4
+#define V4L2_CID_LAST_PRIV V4L2_CID_MAX_EXPOSURE_TIME
+
+/* Video controls */
+static struct vcontrol {
+ struct v4l2_queryctrl qc;
+ u16 reg;
+ u16 start_bit;
+} video_control[] = {
+ {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+ .maximum = 63,
+ .step = 1,
+ },
+ .reg = TCM825X_AG,
+ .start_bit = 0,
+ },
+ {
+ {
+ .id = V4L2_CID_RED_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Red Balance",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+ },
+ .reg = TCM825X_MRG,
+ .start_bit = 0,
+ },
+ {
+ {
+ .id = V4L2_CID_BLUE_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Blue Balance",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+ },
+ .reg = TCM825X_MBG,
+ .start_bit = 0,
+ },
+ {
+ {
+ .id = V4L2_CID_AUTO_WHITE_BALANCE,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Auto White Balance",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 0,
+ },
+ .reg = TCM825X_AWBSW,
+ .start_bit = 7,
+ },
+ {
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure Time",
+ .minimum = 0,
+ .maximum = 0x1fff,
+ .step = 1,
+ },
+ .reg = TCM825X_ESRSPD_U,
+ .start_bit = 0,
+ },
+ {
+ {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Mirror Image",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 0,
+ },
+ .reg = TCM825X_H_INV,
+ .start_bit = 6,
+ },
+ {
+ {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Vertical Flip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 0,
+ },
+ .reg = TCM825X_V_INV,
+ .start_bit = 7,
+ },
+ /* Private controls */
+ {
+ {
+ .id = V4L2_CID_ALC,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Auto Luminance Control",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 0,
+ },
+ .reg = TCM825X_ALCSW,
+ .start_bit = 7,
+ },
+ {
+ {
+ .id = V4L2_CID_H_EDGE_EN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Horizontal Edge Enhancement",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+ },
+ .reg = TCM825X_HDTG,
+ .start_bit = 0,
+ },
+ {
+ {
+ .id = V4L2_CID_V_EDGE_EN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Vertical Edge Enhancement",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+ },
+ .reg = TCM825X_VDTG,
+ .start_bit = 0,
+ },
+ {
+ {
+ .id = V4L2_CID_LENS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Lens Shading Compensation",
+ .minimum = 0,
+ .maximum = 0x3f,
+ .step = 1,
+ },
+ .reg = TCM825X_LENS,
+ .start_bit = 0,
+ },
+ {
+ {
+ .id = V4L2_CID_MAX_EXPOSURE_TIME,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Maximum Exposure Time",
+ .minimum = 0,
+ .maximum = 0x3,
+ .step = 1,
+ },
+ .reg = TCM825X_ESRLIM,
+ .start_bit = 5,
+ },
+};
+
+
+const static struct tcm825x_reg *tcm825x_siz_reg[NUM_IMAGE_SIZES] =
+{ &subqcif, &qqvga, &qcif, &qvga, &cif, &vga };
+
+const static struct tcm825x_reg *tcm825x_fmt_reg[NUM_PIXEL_FORMATS] =
+{ &yuv422, &rgb565 };
+
+/*
+ * Read a value from a register in an TCM825X sensor device. The value is
+ * returned in 'val'.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+static int tcm825x_read_reg(struct i2c_client *client, int reg)
+{
+ int err;
+ struct i2c_msg msg[2];
+ u8 reg_buf, data_buf = 0;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ msg[0].addr = client->addr;
+ msg[0].flags = 0;
+ msg[0].len = 1;
+ msg[0].buf = &reg_buf;
+ msg[1].addr = client->addr;
+ msg[1].flags = I2C_M_RD;
+ msg[1].len = 1;
+ msg[1].buf = &data_buf;
+
+ reg_buf = reg;
+
+ err = i2c_transfer(client->adapter, msg, 2);
+ if (err < 0)
+ return err;
+ return data_buf;
+}
+
+/*
+ * Write a value to a register in an TCM825X sensor device.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+static int tcm825x_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+ int err;
+ struct i2c_msg msg[1];
+ unsigned char data[2];
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ msg->addr = client->addr;
+ msg->flags = 0;
+ msg->len = 2;
+ msg->buf = data;
+ data[0] = reg;
+ data[1] = val;
+ err = i2c_transfer(client->adapter, msg, 1);
+ if (err >= 0)
+ return 0;
+ return err;
+}
+
+static int __tcm825x_write_reg_mask(struct i2c_client *client,
+ u8 reg, u8 val, u8 mask)
+{
+ int rc;
+
+ /* need to do read - modify - write */
+ rc = tcm825x_read_reg(client, reg);
+ if (rc < 0)
+ return rc;
+
+ rc &= (~mask); /* Clear the masked bits */
+ val &= mask; /* Enforce mask on value */
+ val |= rc;
+
+ /* write the new value to the register */
+ rc = tcm825x_write_reg(client, reg, val);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+#define tcm825x_write_reg_mask(client, regmask, val) \
+ __tcm825x_write_reg_mask(client, TCM825X_ADDR((regmask)), val, \
+ TCM825X_MASK((regmask)))
+
+
+/*
+ * Initialize a list of TCM825X registers.
+ * The list of registers is terminated by the pair of values
+ * { TCM825X_REG_TERM, TCM825X_VAL_TERM }.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+static int tcm825x_write_default_regs(struct i2c_client *client,
+ const struct tcm825x_reg *reglist)
+{
+ int err;
+ const struct tcm825x_reg *next = reglist;
+
+ while (!((next->reg == TCM825X_REG_TERM)
+ && (next->val == TCM825X_VAL_TERM))) {
+ err = tcm825x_write_reg(client, next->reg, next->val);
+ if (err) {
+ dev_err(&client->dev, "register writing failed\n");
+ return err;
+ }
+ next++;
+ }
+
+ return 0;
+}
+
+static struct vcontrol *find_vctrl(int id)
+{
+ int i;
+
+ if (id < V4L2_CID_BASE)
+ return NULL;
+
+ for (i = 0; i < ARRAY_SIZE(video_control); i++)
+ if (video_control[i].qc.id == id)
+ return &video_control[i];
+
+ return NULL;
+}
+
+/*
+ * Find the best match for a requested image capture size. The best match
+ * is chosen as the nearest match that has the same number or fewer pixels
+ * as the requested size, or the smallest image size if the requested size
+ * has fewer pixels than the smallest image.
+ */
+static enum image_size tcm825x_find_size(struct v4l2_int_device *s,
+ unsigned int width,
+ unsigned int height)
+{
+ enum image_size isize;
+ unsigned long pixels = width * height;
+ struct tcm825x_sensor *sensor = s->priv;
+
+ for (isize = subQCIF; isize < VGA; isize++) {
+ if (tcm825x_sizes[isize + 1].height
+ * tcm825x_sizes[isize + 1].width > pixels) {
+ dev_dbg(&sensor->i2c_client->dev, "size %d\n", isize);
+
+ return isize;
+ }
+ }
+
+ dev_dbg(&sensor->i2c_client->dev, "format default VGA\n");
+
+ return VGA;
+}
+
+/*
+ * Configure the TCM825X for current image size, pixel format, and
+ * frame period. fper is the frame period (in seconds) expressed as a
+ * fraction. Returns zero if successful, or non-zero otherwise. The
+ * actual frame period is returned in fper.
+ */
+static int tcm825x_configure(struct v4l2_int_device *s)
+{
+ struct tcm825x_sensor *sensor = s->priv;
+ struct v4l2_pix_format *pix = &sensor->pix;
+ enum image_size isize = tcm825x_find_size(s, pix->width, pix->height);
+ struct v4l2_fract *fper = &sensor->timeperframe;
+ enum pixel_format pfmt;
+ int err;
+ u32 tgt_fps;
+ u8 val;
+
+ /* common register initialization */
+ err = tcm825x_write_default_regs(
+ sensor->i2c_client, sensor->platform_data->default_regs());
+ if (err)
+ return err;
+
+ /* configure image size */
+ val = tcm825x_siz_reg[isize]->val;
+ dev_dbg(&sensor->i2c_client->dev,
+ "configuring image size %d\n", isize);
+ err = tcm825x_write_reg_mask(sensor->i2c_client,
+ tcm825x_siz_reg[isize]->reg, val);
+ if (err)
+ return err;
+
+ /* configure pixel format */
+ switch (pix->pixelformat) {
+ default:
+ case V4L2_PIX_FMT_RGB565:
+ pfmt = RGB565;
+ break;
+ case V4L2_PIX_FMT_UYVY:
+ pfmt = YUV422;
+ break;
+ }
+
+ dev_dbg(&sensor->i2c_client->dev,
+ "configuring pixel format %d\n", pfmt);
+ val = tcm825x_fmt_reg[pfmt]->val;
+
+ err = tcm825x_write_reg_mask(sensor->i2c_client,
+ tcm825x_fmt_reg[pfmt]->reg, val);
+ if (err)
+ return err;
+
+ /*
+ * For frame rate < 15, the FPS reg (addr 0x02, bit 7) must be
+ * set. Frame rate will be halved from the normal.
+ */
+ tgt_fps = fper->denominator / fper->numerator;
+ if (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) {
+ val = tcm825x_read_reg(sensor->i2c_client, 0x02);
+ val |= 0x80;
+ tcm825x_write_reg(sensor->i2c_client, 0x02, val);
+ }
+
+ return 0;
+}
+
+static int ioctl_queryctrl(struct v4l2_int_device *s,
+ struct v4l2_queryctrl *qc)
+{
+ struct vcontrol *control;
+
+ control = find_vctrl(qc->id);
+
+ if (control == NULL)
+ return -EINVAL;
+
+ *qc = control->qc;
+
+ return 0;
+}
+
+static int ioctl_g_ctrl(struct v4l2_int_device *s,
+ struct v4l2_control *vc)
+{
+ struct tcm825x_sensor *sensor = s->priv;
+ struct i2c_client *client = sensor->i2c_client;
+ int val, r;
+ struct vcontrol *lvc;
+
+ /* exposure time is special, spread accross 2 registers */
+ if (vc->id == V4L2_CID_EXPOSURE) {
+ int val_lower, val_upper;
+
+ val_upper = tcm825x_read_reg(client,
+ TCM825X_ADDR(TCM825X_ESRSPD_U));
+ if (val_upper < 0)
+ return val_upper;
+ val_lower = tcm825x_read_reg(client,
+ TCM825X_ADDR(TCM825X_ESRSPD_L));
+ if (val_lower < 0)
+ return val_lower;
+
+ vc->value = ((val_upper & 0x1f) << 8) | (val_lower);
+ return 0;
+ }
+
+ lvc = find_vctrl(vc->id);
+ if (lvc == NULL)
+ return -EINVAL;
+
+ r = tcm825x_read_reg(client, TCM825X_ADDR(lvc->reg));
+ if (r < 0)
+ return r;
+ val = r & TCM825X_MASK(lvc->reg);
+ val >>= lvc->start_bit;
+
+ if (val < 0)
+ return val;
+
+ vc->value = val;
+ return 0;
+}
+
+static int ioctl_s_ctrl(struct v4l2_int_device *s,
+ struct v4l2_control *vc)
+{
+ struct tcm825x_sensor *sensor = s->priv;
+ struct i2c_client *client = sensor->i2c_client;
+ struct vcontrol *lvc;
+ int val = vc->value;
+
+ /* exposure time is special, spread accross 2 registers */
+ if (vc->id == V4L2_CID_EXPOSURE) {
+ int val_lower, val_upper;
+ val_lower = val & TCM825X_MASK(TCM825X_ESRSPD_L);
+ val_upper = (val >> 8) & TCM825X_MASK(TCM825X_ESRSPD_U);
+
+ if (tcm825x_write_reg_mask(client,
+ TCM825X_ESRSPD_U, val_upper))
+ return -EIO;
+
+ if (tcm825x_write_reg_mask(client,
+ TCM825X_ESRSPD_L, val_lower))
+ return -EIO;
+
+ return 0;
+ }
+
+ lvc = find_vctrl(vc->id);
+ if (lvc == NULL)
+ return -EINVAL;
+
+ val = val << lvc->start_bit;
+ if (tcm825x_write_reg_mask(client, lvc->reg, val))
+ return -EIO;
+
+ return 0;
+}
+
+static int ioctl_enum_fmt_cap(struct v4l2_int_device *s,
+ struct v4l2_fmtdesc *fmt)
+{
+ int index = fmt->index;
+
+ switch (fmt->type) {
+ case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ if (index >= TCM825X_NUM_CAPTURE_FORMATS)
+ return -EINVAL;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ fmt->flags = tcm825x_formats[index].flags;
+ strlcpy(fmt->description, tcm825x_formats[index].description,
+ sizeof(fmt->description));
+ fmt->pixelformat = tcm825x_formats[index].pixelformat;
+
+ return 0;
+}
+
+static int ioctl_try_fmt_cap(struct v4l2_int_device *s,
+ struct v4l2_format *f)
+{
+ struct tcm825x_sensor *sensor = s->priv;
+ enum image_size isize;
+ int ifmt;
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+
+ isize = tcm825x_find_size(s, pix->width, pix->height);
+ dev_dbg(&sensor->i2c_client->dev, "isize = %d num_capture = %lu\n",
+ isize, (unsigned long)TCM825X_NUM_CAPTURE_FORMATS);
+
+ pix->width = tcm825x_sizes[isize].width;
+ pix->height = tcm825x_sizes[isize].height;
+
+ for (ifmt = 0; ifmt < TCM825X_NUM_CAPTURE_FORMATS; ifmt++)
+ if (pix->pixelformat == tcm825x_formats[ifmt].pixelformat)
+ break;
+
+ if (ifmt == TCM825X_NUM_CAPTURE_FORMATS)
+ ifmt = 0; /* Default = YUV 4:2:2 */
+
+ pix->pixelformat = tcm825x_formats[ifmt].pixelformat;
+ pix->field = V4L2_FIELD_NONE;
+ pix->bytesperline = pix->width * TCM825X_BYTES_PER_PIXEL;
+ pix->sizeimage = pix->bytesperline * pix->height;
+ pix->priv = 0;
+ dev_dbg(&sensor->i2c_client->dev, "format = 0x%08x\n",
+ pix->pixelformat);
+
+ switch (pix->pixelformat) {
+ case V4L2_PIX_FMT_UYVY:
+ default:
+ pix->colorspace = V4L2_COLORSPACE_JPEG;
+ break;
+ case V4L2_PIX_FMT_RGB565:
+ pix->colorspace = V4L2_COLORSPACE_SRGB;
+ break;
+ }
+
+ return 0;
+}
+
+static int ioctl_s_fmt_cap(struct v4l2_int_device *s,
+ struct v4l2_format *f)
+{
+ struct tcm825x_sensor *sensor = s->priv;
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ int rval;
+
+ rval = ioctl_try_fmt_cap(s, f);
+ if (rval)
+ return rval;
+
+ rval = tcm825x_configure(s);
+
+ sensor->pix = *pix;
+
+ return rval;
+}
+
+static int ioctl_g_fmt_cap(struct v4l2_int_device *s,
+ struct v4l2_format *f)
+{
+ struct tcm825x_sensor *sensor = s->priv;
+
+ f->fmt.pix = sensor->pix;
+
+ return 0;
+}
+
+static int ioctl_g_parm(struct v4l2_int_device *s,
+ struct v4l2_streamparm *a)
+{
+ struct tcm825x_sensor *sensor = s->priv;
+ struct v4l2_captureparm *cparm = &a->parm.capture;
+
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ memset(a, 0, sizeof(*a));
+ a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+ cparm->capability = V4L2_CAP_TIMEPERFRAME;
+ cparm->timeperframe = sensor->timeperframe;
+
+ return 0;
+}
+
+static int ioctl_s_parm(struct v4l2_int_device *s,
+ struct v4l2_streamparm *a)
+{
+ struct tcm825x_sensor *sensor = s->priv;
+ struct v4l2_fract *timeperframe = &a->parm.capture.timeperframe;
+ u32 tgt_fps; /* target frames per secound */
+ int rval;
+
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if ((timeperframe->numerator == 0)
+ || (timeperframe->denominator == 0)) {
+ timeperframe->denominator = DEFAULT_FPS;
+ timeperframe->numerator = 1;
+ }
+
+ tgt_fps = timeperframe->denominator / timeperframe->numerator;
+
+ if (tgt_fps > MAX_FPS) {
+ timeperframe->denominator = MAX_FPS;
+ timeperframe->numerator = 1;
+ } else if (tgt_fps < MIN_FPS) {
+ timeperframe->denominator = MIN_FPS;
+ timeperframe->numerator = 1;
+ }
+
+ sensor->timeperframe = *timeperframe;
+
+ rval = tcm825x_configure(s);
+
+ return rval;
+}
+
+static int ioctl_s_power(struct v4l2_int_device *s, int on)
+{
+ struct tcm825x_sensor *sensor = s->priv;
+
+ return sensor->platform_data->power_set(on);
+}
+
+/*
+ * Given the image capture format in pix, the nominal frame period in
+ * timeperframe, calculate the required xclk frequency.
+ *
+ * TCM825X input frequency characteristics are:
+ * Minimum 11.9 MHz, Typical 24.57 MHz and maximum 25/27 MHz
+ */
+
+static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p)
+{
+ struct tcm825x_sensor *sensor = s->priv;
+ struct v4l2_fract *timeperframe = &sensor->timeperframe;
+ u32 tgt_xclk; /* target xclk */
+ u32 tgt_fps; /* target frames per secound */
+ int rval;
+
+ rval = sensor->platform_data->ifparm(p);
+ if (rval)
+ return rval;
+
+ tgt_fps = timeperframe->denominator / timeperframe->numerator;
+
+ tgt_xclk = (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) ?
+ (2457 * tgt_fps) / MAX_HALF_FPS :
+ (2457 * tgt_fps) / MAX_FPS;
+ tgt_xclk *= 10000;
+
+ tgt_xclk = min(tgt_xclk, (u32)TCM825X_XCLK_MAX);
+ tgt_xclk = max(tgt_xclk, (u32)TCM825X_XCLK_MIN);
+
+ p->u.bt656.clock_curr = tgt_xclk;
+
+ return 0;
+}
+
+static int ioctl_g_needs_reset(struct v4l2_int_device *s, void *buf)
+{
+ struct tcm825x_sensor *sensor = s->priv;
+
+ return sensor->platform_data->needs_reset(s, buf, &sensor->pix);
+}
+
+static int ioctl_reset(struct v4l2_int_device *s)
+{
+ return -EBUSY;
+}
+
+static int ioctl_init(struct v4l2_int_device *s)
+{
+ return tcm825x_configure(s);
+}
+
+static int ioctl_dev_exit(struct v4l2_int_device *s)
+{
+ return 0;
+}
+
+static int ioctl_dev_init(struct v4l2_int_device *s)
+{
+ struct tcm825x_sensor *sensor = s->priv;
+ int r;
+
+ r = tcm825x_read_reg(sensor->i2c_client, 0x01);
+ if (r < 0)
+ return r;
+ if (r == 0) {
+ dev_err(&sensor->i2c_client->dev, "device not detected\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+static struct v4l2_int_ioctl_desc tcm825x_ioctl_desc[] = {
+ { vidioc_int_dev_init_num,
+ (v4l2_int_ioctl_func *)ioctl_dev_init },
+ { vidioc_int_dev_exit_num,
+ (v4l2_int_ioctl_func *)ioctl_dev_exit },
+ { vidioc_int_s_power_num,
+ (v4l2_int_ioctl_func *)ioctl_s_power },
+ { vidioc_int_g_ifparm_num,
+ (v4l2_int_ioctl_func *)ioctl_g_ifparm },
+ { vidioc_int_g_needs_reset_num,
+ (v4l2_int_ioctl_func *)ioctl_g_needs_reset },
+ { vidioc_int_reset_num,
+ (v4l2_int_ioctl_func *)ioctl_reset },
+ { vidioc_int_init_num,
+ (v4l2_int_ioctl_func *)ioctl_init },
+ { vidioc_int_enum_fmt_cap_num,
+ (v4l2_int_ioctl_func *)ioctl_enum_fmt_cap },
+ { vidioc_int_try_fmt_cap_num,
+ (v4l2_int_ioctl_func *)ioctl_try_fmt_cap },
+ { vidioc_int_g_fmt_cap_num,
+ (v4l2_int_ioctl_func *)ioctl_g_fmt_cap },
+ { vidioc_int_s_fmt_cap_num,
+ (v4l2_int_ioctl_func *)ioctl_s_fmt_cap },
+ { vidioc_int_g_parm_num,
+ (v4l2_int_ioctl_func *)ioctl_g_parm },
+ { vidioc_int_s_parm_num,
+ (v4l2_int_ioctl_func *)ioctl_s_parm },
+ { vidioc_int_queryctrl_num,
+ (v4l2_int_ioctl_func *)ioctl_queryctrl },
+ { vidioc_int_g_ctrl_num,
+ (v4l2_int_ioctl_func *)ioctl_g_ctrl },
+ { vidioc_int_s_ctrl_num,
+ (v4l2_int_ioctl_func *)ioctl_s_ctrl },
+};
+
+static struct v4l2_int_slave tcm825x_slave = {
+ .ioctls = tcm825x_ioctl_desc,
+ .num_ioctls = ARRAY_SIZE(tcm825x_ioctl_desc),
+};
+
+static struct tcm825x_sensor tcm825x;
+
+static struct v4l2_int_device tcm825x_int_device = {
+ .module = THIS_MODULE,
+ .name = TCM825X_NAME,
+ .priv = &tcm825x,
+ .type = v4l2_int_type_slave,
+ .u = {
+ .slave = &tcm825x_slave,
+ },
+};
+
+static int tcm825x_probe(struct i2c_client *client)
+{
+ struct tcm825x_sensor *sensor = &tcm825x;
+ int rval;
+
+ if (i2c_get_clientdata(client))
+ return -EBUSY;
+
+ sensor->platform_data = client->dev.platform_data;
+
+ if (sensor->platform_data == NULL
+ && !sensor->platform_data->is_okay())
+ return -ENODEV;
+
+ sensor->v4l2_int_device = &tcm825x_int_device;
+
+ sensor->i2c_client = client;
+ i2c_set_clientdata(client, sensor);
+
+ /* Make the default capture format QVGA RGB565 */
+ sensor->pix.width = tcm825x_sizes[QVGA].width;
+ sensor->pix.height = tcm825x_sizes[QVGA].height;
+ sensor->pix.pixelformat = V4L2_PIX_FMT_RGB565;
+
+ rval = v4l2_int_device_register(sensor->v4l2_int_device);
+ if (rval)
+ i2c_set_clientdata(client, NULL);
+
+ return rval;
+}
+
+static int __exit tcm825x_remove(struct i2c_client *client)
+{
+ struct tcm825x_sensor *sensor = i2c_get_clientdata(client);
+
+ if (!client->adapter)
+ return -ENODEV; /* our client isn't attached */
+
+ v4l2_int_device_unregister(sensor->v4l2_int_device);
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+static struct i2c_driver tcm825x_i2c_driver = {
+ .driver = {
+ .name = TCM825X_NAME,
+ },
+ .probe = tcm825x_probe,
+ .remove = __exit_p(tcm825x_remove),
+};
+
+static struct tcm825x_sensor tcm825x = {
+ .timeperframe = {
+ .numerator = 1,
+ .denominator = DEFAULT_FPS,
+ },
+};
+
+static int __init tcm825x_init(void)
+{
+ int rval;
+
+ rval = i2c_add_driver(&tcm825x_i2c_driver);
+ if (rval)
+ printk(KERN_INFO "%s: failed registering " TCM825X_NAME "\n",
+ __FUNCTION__);
+
+ return rval;
+}
+
+static void __exit tcm825x_exit(void)
+{
+ i2c_del_driver(&tcm825x_i2c_driver);
+}
+
+/*
+ * FIXME: Menelaus isn't ready (?) at module_init stage, so use
+ * late_initcall for now.
+ */
+late_initcall(tcm825x_init);
+module_exit(tcm825x_exit);
+
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>");
+MODULE_DESCRIPTION("TCM825x camera sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/tcm825x.h b/drivers/media/video/tcm825x.h
new file mode 100644
index 00000000000..966765b66b3
--- /dev/null
+++ b/drivers/media/video/tcm825x.h
@@ -0,0 +1,199 @@
+/*
+ * drivers/media/video/tcm825x.h
+ *
+ * Register definitions for the TCM825X CameraChip.
+ *
+ * Author: David Cohen (david.cohen@indt.org.br)
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ * This file was based on ov9640.h from MontaVista
+ */
+
+#ifndef TCM825X_H
+#define TCM825X_H
+
+#include <linux/videodev2.h>
+
+#include <media/v4l2-int-device.h>
+
+#define TCM825X_NAME "tcm825x"
+
+#define TCM825X_MASK(x) x & 0x00ff
+#define TCM825X_ADDR(x) (x & 0xff00) >> 8
+
+/* The TCM825X I2C sensor chip has a fixed slave address of 0x3d. */
+#define TCM825X_I2C_ADDR 0x3d
+
+/*
+ * define register offsets for the TCM825X sensor chip
+ * OFFSET(8 bits) + MASK(8 bits)
+ * MASK bit 4 and 3 are used when the register uses more than one address
+ */
+#define TCM825X_FPS 0x0280
+#define TCM825X_ACF 0x0240
+#define TCM825X_DOUTBUF 0x020C
+#define TCM825X_DCLKP 0x0202
+#define TCM825X_ACFDET 0x0201
+#define TCM825X_DOUTSW 0x0380
+#define TCM825X_DATAHZ 0x0340
+#define TCM825X_PICSIZ 0x033c
+#define TCM825X_PICFMT 0x0302
+#define TCM825X_V_INV 0x0480
+#define TCM825X_H_INV 0x0440
+#define TCM825X_ESRLSW 0x0430
+#define TCM825X_V_LENGTH 0x040F
+#define TCM825X_ALCSW 0x0580
+#define TCM825X_ESRLIM 0x0560
+#define TCM825X_ESRSPD_U 0x051F
+#define TCM825X_ESRSPD_L 0x06FF
+#define TCM825X_AG 0x07FF
+#define TCM825X_ESRSPD2 0x06FF
+#define TCM825X_ALCMODE 0x0830
+#define TCM825X_ALCH 0x080F
+#define TCM825X_ALCL 0x09FF
+#define TCM825X_AWBSW 0x0A80
+#define TCM825X_MRG 0x0BFF
+#define TCM825X_MBG 0x0CFF
+#define TCM825X_GAMSW 0x0D80
+#define TCM825X_HDTG 0x0EFF
+#define TCM825X_VDTG 0x0FFF
+#define TCM825X_HDTCORE 0x10F0
+#define TCM825X_VDTCORE 0x100F
+#define TCM825X_CONT 0x11FF
+#define TCM825X_BRIGHT 0x12FF
+#define TCM825X_VHUE 0x137F
+#define TCM825X_UHUE 0x147F
+#define TCM825X_VGAIN 0x153F
+#define TCM825X_UGAIN 0x163F
+#define TCM825X_UVCORE 0x170F
+#define TCM825X_SATU 0x187F
+#define TCM825X_MHMODE 0x1980
+#define TCM825X_MHLPFSEL 0x1940
+#define TCM825X_YMODE 0x1930
+#define TCM825X_MIXHG 0x1907
+#define TCM825X_LENS 0x1A3F
+#define TCM825X_AGLIM 0x1BE0
+#define TCM825X_LENSRPOL 0x1B10
+#define TCM825X_LENSRGAIN 0x1B0F
+#define TCM825X_ES100S 0x1CFF
+#define TCM825X_ES120S 0x1DFF
+#define TCM825X_DMASK 0x1EC0
+#define TCM825X_CODESW 0x1E20
+#define TCM825X_CODESEL 0x1E10
+#define TCM825X_TESPIC 0x1E04
+#define TCM825X_PICSEL 0x1E03
+#define TCM825X_HNUM 0x20FF
+#define TCM825X_VOUTPH 0x287F
+#define TCM825X_ESROUT 0x327F
+#define TCM825X_ESROUT2 0x33FF
+#define TCM825X_AGOUT 0x34FF
+#define TCM825X_DGOUT 0x353F
+#define TCM825X_AGSLOW1 0x39C0
+#define TCM825X_FLLSMODE 0x3930
+#define TCM825X_FLLSLIM 0x390F
+#define TCM825X_DETSEL 0x3AF0
+#define TCM825X_ACDETNC 0x3A0F
+#define TCM825X_AGSLOW2 0x3BC0
+#define TCM825X_DG 0x3B3F
+#define TCM825X_REJHLEV 0x3CFF
+#define TCM825X_ALCLOCK 0x3D80
+#define TCM825X_FPSLNKSW 0x3D40
+#define TCM825X_ALCSPD 0x3D30
+#define TCM825X_REJH 0x3D03
+#define TCM825X_SHESRSW 0x3E80
+#define TCM825X_ESLIMSEL 0x3E40
+#define TCM825X_SHESRSPD 0x3E30
+#define TCM825X_ELSTEP 0x3E0C
+#define TCM825X_ELSTART 0x3E03
+#define TCM825X_AGMIN 0x3FFF
+#define TCM825X_PREGRG 0x423F
+#define TCM825X_PREGBG 0x433F
+#define TCM825X_PRERG 0x443F
+#define TCM825X_PREBG 0x453F
+#define TCM825X_MSKBR 0x477F
+#define TCM825X_MSKGR 0x487F
+#define TCM825X_MSKRB 0x497F
+#define TCM825X_MSKGB 0x4A7F
+#define TCM825X_MSKRG 0x4B7F
+#define TCM825X_MSKBG 0x4C7F
+#define TCM825X_HDTCSW 0x4D80
+#define TCM825X_VDTCSW 0x4D40
+#define TCM825X_DTCYL 0x4D3F
+#define TCM825X_HDTPSW 0x4E80
+#define TCM825X_VDTPSW 0x4E40
+#define TCM825X_DTCGAIN 0x4E3F
+#define TCM825X_DTLLIMSW 0x4F10
+#define TCM825X_DTLYLIM 0x4F0F
+#define TCM825X_YLCUTLMSK 0x5080
+#define TCM825X_YLCUTL 0x503F
+#define TCM825X_YLCUTHMSK 0x5180
+#define TCM825X_YLCUTH 0x513F
+#define TCM825X_UVSKNC 0x527F
+#define TCM825X_UVLJ 0x537F
+#define TCM825X_WBGMIN 0x54FF
+#define TCM825X_WBGMAX 0x55FF
+#define TCM825X_WBSPDUP 0x5603
+#define TCM825X_ALLAREA 0x5820
+#define TCM825X_WBLOCK 0x5810
+#define TCM825X_WB2SP 0x580F
+#define TCM825X_KIZUSW 0x5920
+#define TCM825X_PBRSW 0x5910
+#define TCM825X_ABCSW 0x5903
+#define TCM825X_PBDLV 0x5AFF
+#define TCM825X_PBC1LV 0x5BFF
+
+#define TCM825X_NUM_REGS (TCM825X_ADDR(TCM825X_PBC1LV) + 1)
+
+#define TCM825X_BYTES_PER_PIXEL 2
+
+#define TCM825X_REG_TERM 0xff /* terminating list entry for reg */
+#define TCM825X_VAL_TERM 0xff /* terminating list entry for val */
+
+/* define a structure for tcm825x register initialization values */
+struct tcm825x_reg {
+ u8 val;
+ u16 reg;
+};
+
+enum image_size { subQCIF = 0, QQVGA, QCIF, QVGA, CIF, VGA };
+enum pixel_format { YUV422 = 0, RGB565 };
+#define NUM_IMAGE_SIZES 6
+#define NUM_PIXEL_FORMATS 2
+
+#define TCM825X_XCLK_MIN 11900000
+#define TCM825X_XCLK_MAX 25000000
+
+struct capture_size {
+ unsigned long width;
+ unsigned long height;
+};
+
+struct tcm825x_platform_data {
+ /* Is the sensor usable? Doesn't yet mean it's there, but you
+ * can try! */
+ int (*is_okay)(void);
+ /* Set power state, zero is off, non-zero is on. */
+ int (*power_set)(int power);
+ /* Default registers written after power-on or reset. */
+ const struct tcm825x_reg *(*default_regs)(void);
+ int (*needs_reset)(struct v4l2_int_device *s, void *buf,
+ struct v4l2_pix_format *fmt);
+ int (*ifparm)(struct v4l2_ifparm *p);
+};
+
+/* Array of image sizes supported by TCM825X. These must be ordered from
+ * smallest image size to largest.
+ */
+const static struct capture_size tcm825x_sizes[] = {
+ { 128, 96 }, /* subQCIF */
+ { 160, 120 }, /* QQVGA */
+ { 176, 144 }, /* QCIF */
+ { 320, 240 }, /* QVGA */
+ { 352, 288 }, /* CIF */
+ { 640, 480 }, /* VGA */
+};
+
+#endif /* ifndef TCM825X_H */
diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c
index 59cff5a3c59..0e5cf459d3e 100644
--- a/drivers/media/video/tda8290.c
+++ b/drivers/media/video/tda8290.c
@@ -16,21 +16,37 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ This "tda8290" module was split apart from the original "tuner" module.
*/
#include <linux/i2c.h>
-#include <linux/videodev.h>
#include <linux/delay.h>
-#include "tuner-driver.h"
+#include <linux/videodev.h>
+#include "tuner-i2c.h"
+#include "tda8290.h"
+
+static int debug = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable verbose debug messages");
+
+#define PREFIX "tda8290 "
/* ---------------------------------------------------------------------- */
struct tda8290_priv {
+ struct tuner_i2c_props i2c_props;
+
unsigned char tda8290_easy_mode;
unsigned char tda827x_lpsel;
unsigned char tda827x_addr;
unsigned char tda827x_ver;
unsigned int sgIF;
+
+ u32 frequency;
+
+ unsigned int *lna_cfg;
+ int (*tuner_callback) (void *dev, int command,int arg);
};
/* ---------------------------------------------------------------------- */
@@ -79,20 +95,21 @@ static struct tda827x_data tda827x_analog[] = {
{ .lomax = 0, .spd = 0, .bs = 0, .bp = 0, .cp = 0, .gc3 = 0, .div1p5 = 0} /* End */
};
-static void tda827x_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
+static void tda827x_set_analog_params(struct dvb_frontend *fe,
+ struct analog_parameters *params)
{
unsigned char tuner_reg[8];
unsigned char reg2[2];
u32 N;
int i;
- struct tuner *t = i2c_get_clientdata(c);
- struct tda8290_priv *priv = t->priv;
+ struct tda8290_priv *priv = fe->tuner_priv;
struct i2c_msg msg = {.addr = priv->tda827x_addr, .flags = 0};
+ unsigned int freq = params->frequency;
- if (t->mode == V4L2_TUNER_RADIO)
+ if (params->mode == V4L2_TUNER_RADIO)
freq = freq / 1000;
- N = freq + ifc;
+ N = freq + priv->sgIF;
i = 0;
while (tda827x_analog[i].lomax < N) {
if(tda827x_analog[i + 1].lomax == 0)
@@ -114,54 +131,53 @@ static void tda827x_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
msg.buf = tuner_reg;
msg.len = 8;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
msg.buf= reg2;
msg.len = 2;
reg2[0] = 0x80;
reg2[1] = 0;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
reg2[0] = 0x60;
reg2[1] = 0xbf;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
reg2[0] = 0x30;
reg2[1] = tuner_reg[4] + 0x80;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
msleep(1);
reg2[0] = 0x30;
reg2[1] = tuner_reg[4] + 4;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
msleep(1);
reg2[0] = 0x30;
reg2[1] = tuner_reg[4];
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
msleep(550);
reg2[0] = 0x30;
reg2[1] = (tuner_reg[4] & 0xfc) + tda827x_analog[i].cp ;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
reg2[0] = 0x60;
reg2[1] = 0x3f;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
reg2[0] = 0x80;
reg2[1] = 0x08; // Vsync en
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
}
-static void tda827x_agcf(struct i2c_client *c)
+static void tda827x_agcf(struct dvb_frontend *fe)
{
- struct tuner *t = i2c_get_clientdata(c);
- struct tda8290_priv *priv = t->priv;
+ struct tda8290_priv *priv = fe->tuner_priv;
unsigned char data[] = {0x80, 0x0c};
struct i2c_msg msg = {.addr = priv->tda827x_addr, .buf = data,
.flags = 0, .len = 2};
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
}
/* ---------------------------------------------------------------------- */
@@ -204,58 +220,64 @@ static struct tda827xa_data tda827xa_analog[] = {
{ .lomax = 0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0} /* End */
};
-static void tda827xa_lna_gain(struct i2c_client *c, int high)
+static void tda827xa_lna_gain(struct dvb_frontend *fe, int high,
+ struct analog_parameters *params)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct tda8290_priv *priv = fe->tuner_priv;
unsigned char buf[] = {0x22, 0x01};
int arg;
- struct i2c_msg msg = {.addr = c->addr, .flags = 0, .buf = buf, .len = sizeof(buf)};
- if (t->config) {
+ struct i2c_msg msg = {.addr = priv->i2c_props.addr, .flags = 0, .buf = buf, .len = sizeof(buf)};
+
+ if ((priv->lna_cfg == NULL) || (priv->tuner_callback == NULL))
+ return;
+
+ if (*priv->lna_cfg) {
if (high)
tuner_dbg("setting LNA to high gain\n");
else
tuner_dbg("setting LNA to low gain\n");
}
- switch (t->config) {
+ switch (*priv->lna_cfg) {
case 0: /* no LNA */
break;
case 1: /* switch is GPIO 0 of tda8290 */
case 2:
/* turn Vsync on */
- if (t->std & V4L2_STD_MN)
+ if (params->std & V4L2_STD_MN)
arg = 1;
else
arg = 0;
- if (t->tuner_callback)
- t->tuner_callback(c->adapter->algo_data, 1, arg);
+ if (priv->tuner_callback)
+ priv->tuner_callback(priv->i2c_props.adap->algo_data, 1, arg);
buf[1] = high ? 0 : 1;
- if (t->config == 2)
+ if (*priv->lna_cfg == 2)
buf[1] = high ? 1 : 0;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
break;
case 3: /* switch with GPIO of saa713x */
- if (t->tuner_callback)
- t->tuner_callback(c->adapter->algo_data, 0, high);
+ if (priv->tuner_callback)
+ priv->tuner_callback(priv->i2c_props.adap->algo_data, 0, high);
break;
}
}
-static void tda827xa_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
+static void tda827xa_set_analog_params(struct dvb_frontend *fe,
+ struct analog_parameters *params)
{
unsigned char tuner_reg[11];
u32 N;
int i;
- struct tuner *t = i2c_get_clientdata(c);
- struct tda8290_priv *priv = t->priv;
+ struct tda8290_priv *priv = fe->tuner_priv;
struct i2c_msg msg = {.addr = priv->tda827x_addr, .flags = 0, .buf = tuner_reg};
+ unsigned int freq = params->frequency;
- tda827xa_lna_gain( c, 1);
+ tda827xa_lna_gain(fe, 1, params);
msleep(10);
- if (t->mode == V4L2_TUNER_RADIO)
+ if (params->mode == V4L2_TUNER_RADIO)
freq = freq / 1000;
- N = freq + ifc;
+ N = freq + priv->sgIF;
i = 0;
while (tda827xa_analog[i].lomax < N) {
if(tda827xa_analog[i + 1].lomax == 0)
@@ -278,7 +300,7 @@ static void tda827xa_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
tuner_reg[9] = 0x20;
tuner_reg[10] = 0x00;
msg.len = 11;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
tuner_reg[0] = 0x90;
tuner_reg[1] = 0xff;
@@ -286,82 +308,131 @@ static void tda827xa_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
tuner_reg[3] = 0;
tuner_reg[4] = 0x99 + (priv->tda827x_lpsel << 1);
msg.len = 5;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
tuner_reg[0] = 0xa0;
tuner_reg[1] = 0xc0;
msg.len = 2;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
tuner_reg[0] = 0x30;
tuner_reg[1] = 0x10 + tda827xa_analog[i].scr;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
msg.flags = I2C_M_RD;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
msg.flags = 0;
tuner_reg[1] >>= 4;
tuner_dbg("AGC2 gain is: %d\n", tuner_reg[1]);
if (tuner_reg[1] < 1)
- tda827xa_lna_gain( c, 0);
+ tda827xa_lna_gain(fe, 0, params);
msleep(100);
tuner_reg[0] = 0x60;
tuner_reg[1] = 0x3c;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
msleep(163);
tuner_reg[0] = 0x50;
tuner_reg[1] = 0x8f + (tda827xa_analog[i].gc3 << 4);
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
tuner_reg[0] = 0x80;
tuner_reg[1] = 0x28;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
tuner_reg[0] = 0xb0;
tuner_reg[1] = 0x01;
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
tuner_reg[0] = 0xc0;
tuner_reg[1] = 0x19 + (priv->tda827x_lpsel << 1);
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
}
-static void tda827xa_agcf(struct i2c_client *c)
+static void tda827xa_agcf(struct dvb_frontend *fe)
{
- struct tuner *t = i2c_get_clientdata(c);
- struct tda8290_priv *priv = t->priv;
+ struct tda8290_priv *priv = fe->tuner_priv;
unsigned char data[] = {0x80, 0x2c};
struct i2c_msg msg = {.addr = priv->tda827x_addr, .buf = data,
.flags = 0, .len = 2};
- i2c_transfer(c->adapter, &msg, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
}
/*---------------------------------------------------------------------*/
-static void tda8290_i2c_bridge(struct i2c_client *c, int close)
+static void tda8290_i2c_bridge(struct dvb_frontend *fe, int close)
{
+ struct tda8290_priv *priv = fe->tuner_priv;
+
unsigned char enable[2] = { 0x21, 0xC0 };
unsigned char disable[2] = { 0x21, 0x00 };
unsigned char *msg;
if(close) {
msg = enable;
- i2c_master_send(c, msg, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, msg, 2);
/* let the bridge stabilize */
msleep(20);
} else {
msg = disable;
- i2c_master_send(c, msg, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, msg, 2);
}
}
/*---------------------------------------------------------------------*/
-static int tda8290_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
+static void set_audio(struct dvb_frontend *fe,
+ struct analog_parameters *params)
+{
+ struct tda8290_priv *priv = fe->tuner_priv;
+ char* mode;
+
+ priv->tda827x_lpsel = 0;
+ if (params->std & V4L2_STD_MN) {
+ priv->sgIF = 92;
+ priv->tda8290_easy_mode = 0x01;
+ priv->tda827x_lpsel = 1;
+ mode = "MN";
+ } else if (params->std & V4L2_STD_B) {
+ priv->sgIF = 108;
+ priv->tda8290_easy_mode = 0x02;
+ mode = "B";
+ } else if (params->std & V4L2_STD_GH) {
+ priv->sgIF = 124;
+ priv->tda8290_easy_mode = 0x04;
+ mode = "GH";
+ } else if (params->std & V4L2_STD_PAL_I) {
+ priv->sgIF = 124;
+ priv->tda8290_easy_mode = 0x08;
+ mode = "I";
+ } else if (params->std & V4L2_STD_DK) {
+ priv->sgIF = 124;
+ priv->tda8290_easy_mode = 0x10;
+ mode = "DK";
+ } else if (params->std & V4L2_STD_SECAM_L) {
+ priv->sgIF = 124;
+ priv->tda8290_easy_mode = 0x20;
+ mode = "L";
+ } else if (params->std & V4L2_STD_SECAM_LC) {
+ priv->sgIF = 20;
+ priv->tda8290_easy_mode = 0x40;
+ mode = "LC";
+ } else {
+ priv->sgIF = 124;
+ priv->tda8290_easy_mode = 0x10;
+ mode = "xx";
+ }
+
+ if (params->mode == V4L2_TUNER_RADIO)
+ priv->sgIF = 88; /* if frequency is 5.5 MHz */
+
+ tuner_dbg("setting tda8290 to system %s\n", mode);
+}
+
+static int tda8290_set_params(struct dvb_frontend *fe,
+ struct analog_parameters *params)
{
- struct tuner *t = i2c_get_clientdata(c);
- struct tda8290_priv *priv = t->priv;
+ struct tda8290_priv *priv = fe->tuner_priv;
unsigned char soft_reset[] = { 0x00, 0x00 };
unsigned char easy_mode[] = { 0x01, priv->tda8290_easy_mode };
unsigned char expert_mode[] = { 0x01, 0x80 };
@@ -384,35 +455,38 @@ static int tda8290_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
pll_stat;
int i;
- tuner_dbg("tda827xa config is 0x%02x\n", t->config);
- i2c_master_send(c, easy_mode, 2);
- i2c_master_send(c, agc_out_on, 2);
- i2c_master_send(c, soft_reset, 2);
+ set_audio(fe, params);
+
+ if (priv->lna_cfg)
+ tuner_dbg("tda827xa config is 0x%02x\n", *priv->lna_cfg);
+ tuner_i2c_xfer_send(&priv->i2c_props, easy_mode, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, agc_out_on, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, soft_reset, 2);
msleep(1);
expert_mode[1] = priv->tda8290_easy_mode + 0x80;
- i2c_master_send(c, expert_mode, 2);
- i2c_master_send(c, gainset_off, 2);
- i2c_master_send(c, if_agc_spd, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, expert_mode, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, gainset_off, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, if_agc_spd, 2);
if (priv->tda8290_easy_mode & 0x60)
- i2c_master_send(c, adc_head_9, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, adc_head_9, 2);
else
- i2c_master_send(c, adc_head_6, 2);
- i2c_master_send(c, pll_bw_nom, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, adc_head_6, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, pll_bw_nom, 2);
- tda8290_i2c_bridge(c, 1);
+ tda8290_i2c_bridge(fe, 1);
if (priv->tda827x_ver != 0)
- tda827xa_tune(c, ifc, freq);
+ tda827xa_set_analog_params(fe, params);
else
- tda827x_tune(c, ifc, freq);
+ tda827x_set_analog_params(fe, params);
for (i = 0; i < 3; i++) {
- i2c_master_send(c, &addr_pll_stat, 1);
- i2c_master_recv(c, &pll_stat, 1);
+ tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1);
+ tuner_i2c_xfer_recv(&priv->i2c_props, &pll_stat, 1);
if (pll_stat & 0x80) {
- i2c_master_send(c, &addr_adc_sat, 1);
- i2c_master_recv(c, &adc_sat, 1);
- i2c_master_send(c, &addr_agc_stat, 1);
- i2c_master_recv(c, &agc_stat, 1);
+ tuner_i2c_xfer_send(&priv->i2c_props, &addr_adc_sat, 1);
+ tuner_i2c_xfer_recv(&priv->i2c_props, &adc_sat, 1);
+ tuner_i2c_xfer_send(&priv->i2c_props, &addr_agc_stat, 1);
+ tuner_i2c_xfer_recv(&priv->i2c_props, &agc_stat, 1);
tuner_dbg("tda8290 is locked, AGC: %d\n", agc_stat);
break;
} else {
@@ -424,28 +498,28 @@ static int tda8290_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
if ((agc_stat > 115) || (!(pll_stat & 0x80) && (adc_sat < 20))) {
tuner_dbg("adjust gain, step 1. Agc: %d, ADC stat: %d, lock: %d\n",
agc_stat, adc_sat, pll_stat & 0x80);
- i2c_master_send(c, gainset_2, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, gainset_2, 2);
msleep(100);
- i2c_master_send(c, &addr_agc_stat, 1);
- i2c_master_recv(c, &agc_stat, 1);
- i2c_master_send(c, &addr_pll_stat, 1);
- i2c_master_recv(c, &pll_stat, 1);
+ tuner_i2c_xfer_send(&priv->i2c_props, &addr_agc_stat, 1);
+ tuner_i2c_xfer_recv(&priv->i2c_props, &agc_stat, 1);
+ tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1);
+ tuner_i2c_xfer_recv(&priv->i2c_props, &pll_stat, 1);
if ((agc_stat > 115) || !(pll_stat & 0x80)) {
tuner_dbg("adjust gain, step 2. Agc: %d, lock: %d\n",
agc_stat, pll_stat & 0x80);
if (priv->tda827x_ver != 0)
- tda827xa_agcf(c);
+ tda827xa_agcf(fe);
else
- tda827x_agcf(c);
+ tda827x_agcf(fe);
msleep(100);
- i2c_master_send(c, &addr_agc_stat, 1);
- i2c_master_recv(c, &agc_stat, 1);
- i2c_master_send(c, &addr_pll_stat, 1);
- i2c_master_recv(c, &pll_stat, 1);
+ tuner_i2c_xfer_send(&priv->i2c_props, &addr_agc_stat, 1);
+ tuner_i2c_xfer_recv(&priv->i2c_props, &agc_stat, 1);
+ tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1);
+ tuner_i2c_xfer_recv(&priv->i2c_props, &pll_stat, 1);
if((agc_stat > 115) || !(pll_stat & 0x80)) {
tuner_dbg("adjust gain, step 3. Agc: %d\n", agc_stat);
- i2c_master_send(c, adc_head_12, 2);
- i2c_master_send(c, pll_bw_low, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, adc_head_12, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, pll_bw_low, 2);
msleep(100);
}
}
@@ -453,132 +527,106 @@ static int tda8290_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
/* l/ l' deadlock? */
if(priv->tda8290_easy_mode & 0x60) {
- i2c_master_send(c, &addr_adc_sat, 1);
- i2c_master_recv(c, &adc_sat, 1);
- i2c_master_send(c, &addr_pll_stat, 1);
- i2c_master_recv(c, &pll_stat, 1);
+ tuner_i2c_xfer_send(&priv->i2c_props, &addr_adc_sat, 1);
+ tuner_i2c_xfer_recv(&priv->i2c_props, &adc_sat, 1);
+ tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1);
+ tuner_i2c_xfer_recv(&priv->i2c_props, &pll_stat, 1);
if ((adc_sat > 20) || !(pll_stat & 0x80)) {
tuner_dbg("trying to resolve SECAM L deadlock\n");
- i2c_master_send(c, agc_rst_on, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, agc_rst_on, 2);
msleep(40);
- i2c_master_send(c, agc_rst_off, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, agc_rst_off, 2);
}
}
- tda8290_i2c_bridge(c, 0);
- i2c_master_send(c, if_agc_set, 2);
+ tda8290_i2c_bridge(fe, 0);
+ tuner_i2c_xfer_send(&priv->i2c_props, if_agc_set, 2);
+
+ priv->frequency = (V4L2_TUNER_RADIO == params->mode) ?
+ params->frequency * 125 / 2 : params->frequency * 62500;
+
return 0;
}
/*---------------------------------------------------------------------*/
-static void set_audio(struct tuner *t)
+static int tda8290_has_signal(struct dvb_frontend *fe)
{
- struct tda8290_priv *priv = t->priv;
- char* mode;
+ struct tda8290_priv *priv = fe->tuner_priv;
+ int ret;
- priv->tda827x_lpsel = 0;
- if (t->std & V4L2_STD_MN) {
- priv->sgIF = 92;
- priv->tda8290_easy_mode = 0x01;
- priv->tda827x_lpsel = 1;
- mode = "MN";
- } else if (t->std & V4L2_STD_B) {
- priv->sgIF = 108;
- priv->tda8290_easy_mode = 0x02;
- mode = "B";
- } else if (t->std & V4L2_STD_GH) {
- priv->sgIF = 124;
- priv->tda8290_easy_mode = 0x04;
- mode = "GH";
- } else if (t->std & V4L2_STD_PAL_I) {
- priv->sgIF = 124;
- priv->tda8290_easy_mode = 0x08;
- mode = "I";
- } else if (t->std & V4L2_STD_DK) {
- priv->sgIF = 124;
- priv->tda8290_easy_mode = 0x10;
- mode = "DK";
- } else if (t->std & V4L2_STD_SECAM_L) {
- priv->sgIF = 124;
- priv->tda8290_easy_mode = 0x20;
- mode = "L";
- } else if (t->std & V4L2_STD_SECAM_LC) {
- priv->sgIF = 20;
- priv->tda8290_easy_mode = 0x40;
- mode = "LC";
- } else {
- priv->sgIF = 124;
- priv->tda8290_easy_mode = 0x10;
- mode = "xx";
- }
- tuner_dbg("setting tda8290 to system %s\n", mode);
-}
+ unsigned char i2c_get_afc[1] = { 0x1B };
+ unsigned char afc = 0;
-static void set_tv_freq(struct i2c_client *c, unsigned int freq)
-{
- struct tuner *t = i2c_get_clientdata(c);
- struct tda8290_priv *priv = t->priv;
+ /* for now, report based on afc status */
+ tuner_i2c_xfer_send(&priv->i2c_props, i2c_get_afc, ARRAY_SIZE(i2c_get_afc));
+ tuner_i2c_xfer_recv(&priv->i2c_props, &afc, 1);
+
+ ret = (afc & 0x80) ? 65535 : 0;
- set_audio(t);
- tda8290_tune(c, priv->sgIF, freq);
+ tuner_dbg("AFC status: %d\n", ret);
+
+ return ret;
}
-static void set_radio_freq(struct i2c_client *c, unsigned int freq)
+static int tda8290_get_status(struct dvb_frontend *fe, u32 *status)
{
- /* if frequency is 5.5 MHz */
- tda8290_tune(c, 88, freq);
+ *status = 0;
+
+ if (tda8290_has_signal(fe))
+ *status = TUNER_STATUS_LOCKED;
+
+ return 0;
}
-static int has_signal(struct i2c_client *c)
+static int tda8290_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
{
- unsigned char i2c_get_afc[1] = { 0x1B };
- unsigned char afc = 0;
+ *strength = tda8290_has_signal(fe);
- i2c_master_send(c, i2c_get_afc, ARRAY_SIZE(i2c_get_afc));
- i2c_master_recv(c, &afc, 1);
- return (afc & 0x80)? 65535:0;
+ return 0;
}
/*---------------------------------------------------------------------*/
-static void standby(struct i2c_client *c)
+static int tda8290_standby(struct dvb_frontend *fe)
{
- struct tuner *t = i2c_get_clientdata(c);
- struct tda8290_priv *priv = t->priv;
+ struct tda8290_priv *priv = fe->tuner_priv;
unsigned char cb1[] = { 0x30, 0xD0 };
unsigned char tda8290_standby[] = { 0x00, 0x02 };
unsigned char tda8290_agc_tri[] = { 0x02, 0x20 };
struct i2c_msg msg = {.addr = priv->tda827x_addr, .flags=0, .buf=cb1, .len = 2};
- tda8290_i2c_bridge(c, 1);
+ tda8290_i2c_bridge(fe, 1);
if (priv->tda827x_ver != 0)
cb1[1] = 0x90;
- i2c_transfer(c->adapter, &msg, 1);
- tda8290_i2c_bridge(c, 0);
- i2c_master_send(c, tda8290_agc_tri, 2);
- i2c_master_send(c, tda8290_standby, 2);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
+ tda8290_i2c_bridge(fe, 0);
+ tuner_i2c_xfer_send(&priv->i2c_props, tda8290_agc_tri, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, tda8290_standby, 2);
+
+ return 0;
}
-static void tda8290_init_if(struct i2c_client *c)
+static void tda8290_init_if(struct dvb_frontend *fe)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct tda8290_priv *priv = fe->tuner_priv;
+
unsigned char set_VS[] = { 0x30, 0x6F };
unsigned char set_GP00_CF[] = { 0x20, 0x01 };
unsigned char set_GP01_CF[] = { 0x20, 0x0B };
- if ((t->config == 1) || (t->config == 2))
- i2c_master_send(c, set_GP00_CF, 2);
+ if ((priv->lna_cfg) &&
+ ((*priv->lna_cfg == 1) || (*priv->lna_cfg == 2)))
+ tuner_i2c_xfer_send(&priv->i2c_props, set_GP00_CF, 2);
else
- i2c_master_send(c, set_GP01_CF, 2);
- i2c_master_send(c, set_VS, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, set_GP01_CF, 2);
+ tuner_i2c_xfer_send(&priv->i2c_props, set_VS, 2);
}
-static void tda8290_init_tuner(struct i2c_client *c)
+static void tda8290_init_tuner(struct dvb_frontend *fe)
{
- struct tuner *t = i2c_get_clientdata(c);
- struct tda8290_priv *priv = t->priv;
+ struct tda8290_priv *priv = fe->tuner_priv;
unsigned char tda8275_init[] = { 0x00, 0x00, 0x00, 0x40, 0xdC, 0x04, 0xAf,
0x3F, 0x2A, 0x04, 0xFF, 0x00, 0x00, 0x40 };
unsigned char tda8275a_init[] = { 0x00, 0x00, 0x00, 0x00, 0xdC, 0x05, 0x8b,
@@ -588,33 +636,43 @@ static void tda8290_init_tuner(struct i2c_client *c)
if (priv->tda827x_ver != 0)
msg.buf = tda8275a_init;
- tda8290_i2c_bridge(c, 1);
- i2c_transfer(c->adapter, &msg, 1);
- tda8290_i2c_bridge(c, 0);
+ tda8290_i2c_bridge(fe, 1);
+ i2c_transfer(priv->i2c_props.adap, &msg, 1);
+ tda8290_i2c_bridge(fe, 0);
}
/*---------------------------------------------------------------------*/
-static void tda8290_release(struct i2c_client *c)
+static int tda8290_release(struct dvb_frontend *fe)
{
- struct tuner *t = i2c_get_clientdata(c);
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
- kfree(t->priv);
- t->priv = NULL;
+ return 0;
}
-static struct tuner_operations tda8290_tuner_ops = {
- .set_tv_freq = set_tv_freq,
- .set_radio_freq = set_radio_freq,
- .has_signal = has_signal,
- .standby = standby,
- .release = tda8290_release,
+static int tda8290_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct tda8290_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static struct dvb_tuner_ops tda8290_tuner_ops = {
+ .sleep = tda8290_standby,
+ .set_analog_params = tda8290_set_params,
+ .release = tda8290_release,
+ .get_frequency = tda8290_get_frequency,
+ .get_status = tda8290_get_status,
+ .get_rf_strength = tda8290_get_rf_strength,
};
-int tda8290_init(struct i2c_client *c)
+struct dvb_frontend *tda8290_attach(struct dvb_frontend *fe,
+ struct i2c_adapter* i2c_adap,
+ u8 i2c_addr,
+ struct tda8290_config *cfg)
{
struct tda8290_priv *priv = NULL;
- struct tuner *t = i2c_get_clientdata(c);
u8 data;
int i, ret, tuners_found;
u32 tuner_addrs;
@@ -622,16 +680,23 @@ int tda8290_init(struct i2c_client *c)
priv = kzalloc(sizeof(struct tda8290_priv), GFP_KERNEL);
if (priv == NULL)
- return -ENOMEM;
- t->priv = priv;
+ return NULL;
+ fe->tuner_priv = priv;
+
+ priv->i2c_props.addr = i2c_addr;
+ priv->i2c_props.adap = i2c_adap;
+ if (cfg) {
+ priv->lna_cfg = cfg->lna_cfg;
+ priv->tuner_callback = cfg->tuner_callback;
+ }
- tda8290_i2c_bridge(c, 1);
+ tda8290_i2c_bridge(fe, 1);
/* probe for tuner chip */
tuners_found = 0;
tuner_addrs = 0;
for (i=0x60; i<= 0x63; i++) {
msg.addr = i;
- ret = i2c_transfer(c->adapter, &msg, 1);
+ ret = i2c_transfer(priv->i2c_props.adap, &msg, 1);
if (ret == 1) {
tuners_found++;
tuner_addrs = (tuner_addrs << 8) + i;
@@ -641,11 +706,11 @@ int tda8290_init(struct i2c_client *c)
behind the bridge and we choose the highest address that doesn't
give a response now
*/
- tda8290_i2c_bridge(c, 0);
+ tda8290_i2c_bridge(fe, 0);
if(tuners_found > 1)
for (i = 0; i < tuners_found; i++) {
msg.addr = tuner_addrs & 0xff;
- ret = i2c_transfer(c->adapter, &msg, 1);
+ ret = i2c_transfer(priv->i2c_props.adap, &msg, 1);
if(ret == 1)
tuner_addrs = tuner_addrs >> 8;
else
@@ -653,40 +718,53 @@ int tda8290_init(struct i2c_client *c)
}
if (tuner_addrs == 0) {
tuner_addrs = 0x61;
- tuner_info ("could not clearly identify tuner address, defaulting to %x\n",
+ tuner_info("could not clearly identify tuner address, defaulting to %x\n",
tuner_addrs);
} else {
tuner_addrs = tuner_addrs & 0xff;
- tuner_info ("setting tuner address to %x\n", tuner_addrs);
+ tuner_info("setting tuner address to %x\n", tuner_addrs);
}
priv->tda827x_addr = tuner_addrs;
msg.addr = tuner_addrs;
- tda8290_i2c_bridge(c, 1);
- ret = i2c_transfer(c->adapter, &msg, 1);
+ tda8290_i2c_bridge(fe, 1);
+ ret = i2c_transfer(priv->i2c_props.adap, &msg, 1);
if( ret != 1)
- tuner_warn ("TDA827x access failed!\n");
+ tuner_warn("TDA827x access failed!\n");
+
+ memcpy(&fe->ops.tuner_ops, &tda8290_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
if ((data & 0x3c) == 0) {
- strlcpy(c->name, "tda8290+75", sizeof(c->name));
+ strlcpy(fe->ops.tuner_ops.info.name, "tda8290+75",
+ sizeof(fe->ops.tuner_ops.info.name));
+ fe->ops.tuner_ops.info.frequency_min = 55000000;
+ fe->ops.tuner_ops.info.frequency_max = 860000000;
+ fe->ops.tuner_ops.info.frequency_step = 250000;
priv->tda827x_ver = 0;
} else {
- strlcpy(c->name, "tda8290+75a", sizeof(c->name));
+ strlcpy(fe->ops.tuner_ops.info.name, "tda8290+75a",
+ sizeof(fe->ops.tuner_ops.info.name));
+ fe->ops.tuner_ops.info.frequency_min = 44000000;
+ fe->ops.tuner_ops.info.frequency_max = 906000000;
+ fe->ops.tuner_ops.info.frequency_step = 62500;
priv->tda827x_ver = 2;
}
- tuner_info("type set to %s\n", c->name);
-
- memcpy(&t->ops, &tda8290_tuner_ops, sizeof(struct tuner_operations));
priv->tda827x_lpsel = 0;
- t->mode = V4L2_TUNER_ANALOG_TV;
- tda8290_init_tuner(c);
- tda8290_init_if(c);
- return 0;
+ tda8290_init_tuner(fe);
+ tda8290_init_if(fe);
+ return fe;
}
-int tda8290_probe(struct i2c_client *c)
+int tda8290_probe(struct i2c_adapter* i2c_adap, u8 i2c_addr)
{
+ struct tuner_i2c_props i2c_props = {
+ .adap = i2c_adap,
+ .addr = i2c_addr
+ };
+
unsigned char soft_reset[] = { 0x00, 0x00 };
unsigned char easy_mode_b[] = { 0x01, 0x02 };
unsigned char easy_mode_g[] = { 0x01, 0x04 };
@@ -694,23 +772,30 @@ int tda8290_probe(struct i2c_client *c)
unsigned char addr_dto_lsb = 0x07;
unsigned char data;
- i2c_master_send(c, easy_mode_b, 2);
- i2c_master_send(c, soft_reset, 2);
- i2c_master_send(c, &addr_dto_lsb, 1);
- i2c_master_recv(c, &data, 1);
+ tuner_i2c_xfer_send(&i2c_props, easy_mode_b, 2);
+ tuner_i2c_xfer_send(&i2c_props, soft_reset, 2);
+ tuner_i2c_xfer_send(&i2c_props, &addr_dto_lsb, 1);
+ tuner_i2c_xfer_recv(&i2c_props, &data, 1);
if (data == 0) {
- i2c_master_send(c, easy_mode_g, 2);
- i2c_master_send(c, soft_reset, 2);
- i2c_master_send(c, &addr_dto_lsb, 1);
- i2c_master_recv(c, &data, 1);
+ tuner_i2c_xfer_send(&i2c_props, easy_mode_g, 2);
+ tuner_i2c_xfer_send(&i2c_props, soft_reset, 2);
+ tuner_i2c_xfer_send(&i2c_props, &addr_dto_lsb, 1);
+ tuner_i2c_xfer_recv(&i2c_props, &data, 1);
if (data == 0x7b) {
return 0;
}
}
- i2c_master_send(c, restore_9886, 3);
+ tuner_i2c_xfer_send(&i2c_props, restore_9886, 3);
return -1;
}
+EXPORT_SYMBOL_GPL(tda8290_probe);
+EXPORT_SYMBOL_GPL(tda8290_attach);
+
+MODULE_DESCRIPTION("Philips TDA8290 + TDA8275 / TDA8275a tuner driver");
+MODULE_AUTHOR("Gerd Knorr, Hartmut Hackmann");
+MODULE_LICENSE("GPL");
+
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* ---------------------------------------------------------------------------
diff --git a/drivers/media/video/tda8290.h b/drivers/media/video/tda8290.h
new file mode 100644
index 00000000000..107b24b05aa
--- /dev/null
+++ b/drivers/media/video/tda8290.h
@@ -0,0 +1,54 @@
+/*
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __TDA8290_H__
+#define __TDA8290_H__
+
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+
+struct tda8290_config
+{
+ unsigned int *lna_cfg;
+ int (*tuner_callback) (void *dev, int command,int arg);
+};
+
+#if defined(CONFIG_TUNER_TDA8290) || (defined(CONFIG_TUNER_TDA8290_MODULE) && defined(MODULE))
+extern int tda8290_probe(struct i2c_adapter* i2c_adap, u8 i2c_addr);
+
+extern struct dvb_frontend *tda8290_attach(struct dvb_frontend *fe,
+ struct i2c_adapter* i2c_adap,
+ u8 i2c_addr,
+ struct tda8290_config *cfg);
+#else
+static inline int tda8290_probe(struct i2c_adapter* i2c_adap, u8 i2c_addr)
+{
+ printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
+ __FUNCTION__);
+ return -EINVAL;
+}
+
+static inline struct dvb_frontend *tda8290_attach(struct dvb_frontend *fe,
+ struct i2c_adapter* i2c_adap,
+ u8 i2c_addr,
+ struct tda8290_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif
+
+#endif /* __TDA8290_H__ */
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index a8f773274fe..be5387f11af 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -1,14 +1,12 @@
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/types.h>
-#include <linux/videodev.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/delay.h>
-
+#include <linux/videodev.h>
#include <media/v4l2-common.h>
#include <media/tuner.h>
#include "tuner-driver.h"
@@ -31,6 +29,8 @@
i2c_adapter_id(t->i2c.adapter), t->i2c.addr , ##arg); } while (0)
struct tda9887_priv {
+ struct tuner_i2c_props i2c_props;
+
unsigned char data[4];
};
@@ -97,6 +97,8 @@ struct tvnorm {
#define cAudioIF_6_5 0x03 // bit e0:1
+#define cVideoIFMask 0x1c // bit e2:4
+/* Video IF selection in TV Mode (bit B3=0) */
#define cVideoIF_58_75 0x00 // bit e2:4
#define cVideoIF_45_75 0x04 // bit e2:4
#define cVideoIF_38_90 0x08 // bit e2:4
@@ -106,6 +108,13 @@ struct tvnorm {
#define cRadioIF_45_75 0x18 // bit e2:4
#define cRadioIF_38_90 0x1C // bit e2:4
+/* IF1 selection in Radio Mode (bit B3=1) */
+#define cRadioIF_33_30 0x00 // bit e2,4 (also 0x10,0x14)
+#define cRadioIF_41_30 0x04 // bit e2,4
+
+/* Output of AFC pin in radio mode when bit E7=1 */
+#define cRadioAGC_SIF 0x00 // bit e3
+#define cRadioAGC_FM 0x08 // bit e3
#define cTunerGainNormal 0x00 // bit e5
#define cTunerGainLow 0x20 // bit e5
@@ -487,9 +496,13 @@ static int tda9887_set_config(struct tuner *t, char *buf)
if (t->tda9887_config & TDA9887_GATING_18)
buf[3] &= ~cGating_36;
- if (t->tda9887_config & TDA9887_GAIN_NORMAL) {
- radio_stereo.e &= ~cTunerGainLow;
- radio_mono.e &= ~cTunerGainLow;
+ if (t->mode == V4L2_TUNER_RADIO) {
+ if (t->tda9887_config & TDA9887_RIF_41_3) {
+ buf[3] &= ~cVideoIFMask;
+ buf[3] |= cRadioIF_41_30;
+ }
+ if (t->tda9887_config & TDA9887_GAIN_NORMAL)
+ buf[3] &= ~cTunerGainLow;
}
return 0;
@@ -499,19 +512,19 @@ static int tda9887_set_config(struct tuner *t, char *buf)
static int tda9887_status(struct tuner *t)
{
+ struct tda9887_priv *priv = t->priv;
unsigned char buf[1];
int rc;
memset(buf,0,sizeof(buf));
- if (1 != (rc = i2c_master_recv(&t->i2c,buf,1)))
+ if (1 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props,buf,1)))
tda9887_info("i2c i/o error: rc == %d (should be 1)\n",rc);
dump_read_message(t, buf);
return 0;
}
-static void tda9887_configure(struct i2c_client *client)
+static void tda9887_configure(struct tuner *t)
{
- struct tuner *t = i2c_get_clientdata(client);
struct tda9887_priv *priv = t->priv;
int rc;
@@ -546,7 +559,7 @@ static void tda9887_configure(struct i2c_client *client)
if (tuner_debug > 1)
dump_write_message(t, priv->data);
- if (4 != (rc = i2c_master_send(&t->i2c,priv->data,4)))
+ if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,priv->data,4)))
tda9887_info("i2c i/o error: rc == %d (should be 4)\n",rc);
if (tuner_debug > 2) {
@@ -557,16 +570,15 @@ static void tda9887_configure(struct i2c_client *client)
/* ---------------------------------------------------------------------- */
-static void tda9887_tuner_status(struct i2c_client *client)
+static void tda9887_tuner_status(struct tuner *t)
{
- struct tuner *t = i2c_get_clientdata(client);
struct tda9887_priv *priv = t->priv;
tda9887_info("Data bytes: b=0x%02x c=0x%02x e=0x%02x\n", priv->data[1], priv->data[2], priv->data[3]);
}
-static int tda9887_get_afc(struct i2c_client *client)
+static int tda9887_get_afc(struct tuner *t)
{
- struct tuner *t = i2c_get_clientdata(client);
+ struct tda9887_priv *priv = t->priv;
static int AFC_BITS_2_kHz[] = {
-12500, -37500, -62500, -97500,
-112500, -137500, -162500, -187500,
@@ -576,26 +588,24 @@ static int tda9887_get_afc(struct i2c_client *client)
int afc=0;
__u8 reg = 0;
- if (1 == i2c_master_recv(&t->i2c,&reg,1))
+ if (1 == tuner_i2c_xfer_recv(&priv->i2c_props,&reg,1))
afc = AFC_BITS_2_kHz[(reg>>1)&0x0f];
return afc;
}
-static void tda9887_standby(struct i2c_client *client)
+static void tda9887_standby(struct tuner *t)
{
- tda9887_configure(client);
+ tda9887_configure(t);
}
-static void tda9887_set_freq(struct i2c_client *client, unsigned int freq)
+static void tda9887_set_freq(struct tuner *t, unsigned int freq)
{
- tda9887_configure(client);
+ tda9887_configure(t);
}
-static void tda9887_release(struct i2c_client *c)
+static void tda9887_release(struct tuner *t)
{
- struct tuner *t = i2c_get_clientdata(c);
-
kfree(t->priv);
t->priv = NULL;
}
@@ -609,17 +619,19 @@ static struct tuner_operations tda9887_tuner_ops = {
.release = tda9887_release,
};
-int tda9887_tuner_init(struct i2c_client *c)
+int tda9887_tuner_init(struct tuner *t)
{
struct tda9887_priv *priv = NULL;
- struct tuner *t = i2c_get_clientdata(c);
priv = kzalloc(sizeof(struct tda9887_priv), GFP_KERNEL);
if (priv == NULL)
return -ENOMEM;
t->priv = priv;
- strlcpy(c->name, "tda9887", sizeof(c->name));
+ priv->i2c_props.addr = t->i2c.addr;
+ priv->i2c_props.adap = t->i2c.adapter;
+
+ strlcpy(t->i2c.name, "tda9887", sizeof(t->i2c.name));
tda9887_info("tda988[5/6/7] found @ 0x%x (%s)\n", t->i2c.addr,
t->i2c.driver->driver.name);
diff --git a/drivers/media/video/tea5761.c b/drivers/media/video/tea5761.c
index ae105c2cd0a..2150222a386 100644
--- a/drivers/media/video/tea5761.c
+++ b/drivers/media/video/tea5761.c
@@ -8,15 +8,23 @@
*/
#include <linux/i2c.h>
-#include <linux/videodev.h>
#include <linux/delay.h>
+#include <linux/videodev.h>
#include <media/tuner.h>
-#include "tuner-driver.h"
+#include "tuner-i2c.h"
+#include "tea5761.h"
-#define PREFIX "TEA5761 "
+static int debug = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable verbose debug messages");
-/* from tuner-core.c */
-extern int tuner_debug;
+#define PREFIX "tea5761 "
+
+struct tea5761_priv {
+ struct tuner_i2c_props i2c_props;
+
+ u32 frequency;
+};
/*****************************************************************************/
@@ -114,13 +122,6 @@ extern int tuner_debug;
/*****************************************************************************/
-static void set_tv_freq(struct i2c_client *c, unsigned int freq)
-{
- struct tuner *t = i2c_get_clientdata(c);
-
- tuner_warn("This tuner doesn't support TV freq.\n");
-}
-
#define FREQ_OFFSET 0 /* for TEA5767, it is 700 to give the right freq */
static void tea5761_status_dump(unsigned char *buffer)
{
@@ -135,16 +136,18 @@ static void tea5761_status_dump(unsigned char *buffer)
}
/* Freq should be specifyed at 62.5 Hz */
-static void set_radio_freq(struct i2c_client *c, unsigned int frq)
+static int set_radio_freq(struct dvb_frontend *fe,
+ struct analog_parameters *params)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct tea5761_priv *priv = fe->tuner_priv;
+ unsigned int frq = params->frequency;
unsigned char buffer[7] = {0, 0, 0, 0, 0, 0, 0 };
unsigned div;
int rc;
- tuner_dbg (PREFIX "radio freq counter %d\n", frq);
+ tuner_dbg("radio freq counter %d\n", frq);
- if (t->mode == T_STANDBY) {
+ if (params->mode == T_STANDBY) {
tuner_dbg("TEA5761 set to standby mode\n");
buffer[5] |= TEA5761_TNCTRL_MU;
} else {
@@ -152,10 +155,9 @@ static void set_radio_freq(struct i2c_client *c, unsigned int frq)
}
- if (t->audmode == V4L2_TUNER_MODE_MONO) {
+ if (params->audmode == V4L2_TUNER_MODE_MONO) {
tuner_dbg("TEA5761 set to mono\n");
buffer[5] |= TEA5761_TNCTRL_MST;
-;
} else {
tuner_dbg("TEA5761 set to stereo\n");
}
@@ -164,80 +166,155 @@ static void set_radio_freq(struct i2c_client *c, unsigned int frq)
buffer[1] = (div >> 8) & 0x3f;
buffer[2] = div & 0xff;
- if (tuner_debug)
+ if (debug)
tea5761_status_dump(buffer);
- if (7 != (rc = i2c_master_send(c, buffer, 7)))
+ if (7 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 7)))
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
+
+ priv->frequency = frq * 125 / 2;
+
+ return 0;
}
-static int tea5761_signal(struct i2c_client *c)
+static int tea5761_read_status(struct dvb_frontend *fe, char *buffer)
{
- unsigned char buffer[16];
+ struct tea5761_priv *priv = fe->tuner_priv;
int rc;
- struct tuner *t = i2c_get_clientdata(c);
- memset(buffer, 0, sizeof(buffer));
- if (16 != (rc = i2c_master_recv(c, buffer, 16)))
- tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
+ memset(buffer, 0, 16);
+ if (16 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 16))) {
+ tuner_warn("i2c i/o error: rc == %d (should be 16)\n", rc);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static inline int tea5761_signal(struct dvb_frontend *fe, const char *buffer)
+{
+ struct tea5761_priv *priv = fe->tuner_priv;
+
+ int signal = ((buffer[9] & TEA5761_TUNCHECK_LEV_MASK) << (13 - 4));
+
+ tuner_dbg("Signal strength: %d\n", signal);
+
+ return signal;
+}
+
+static inline int tea5761_stereo(struct dvb_frontend *fe, const char *buffer)
+{
+ struct tea5761_priv *priv = fe->tuner_priv;
+
+ int stereo = buffer[9] & TEA5761_TUNCHECK_STEREO;
- return ((buffer[9] & TEA5761_TUNCHECK_LEV_MASK) << (13 - 4));
+ tuner_dbg("Radio ST GET = %02x\n", stereo);
+
+ return (stereo ? V4L2_TUNER_SUB_STEREO : 0);
}
-static int tea5761_stereo(struct i2c_client *c)
+static int tea5761_get_status(struct dvb_frontend *fe, u32 *status)
{
unsigned char buffer[16];
- int rc;
- struct tuner *t = i2c_get_clientdata(c);
- memset(buffer, 0, sizeof(buffer));
- if (16 != (rc = i2c_master_recv(c, buffer, 16)))
- tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
+ *status = 0;
+
+ if (0 == tea5761_read_status(fe, buffer)) {
+ if (tea5761_signal(fe, buffer))
+ *status = TUNER_STATUS_LOCKED;
+ if (tea5761_stereo(fe, buffer))
+ *status |= TUNER_STATUS_STEREO;
+ }
+
+ return 0;
+}
+
+static int tea5761_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ unsigned char buffer[16];
- rc = buffer[9] & TEA5761_TUNCHECK_STEREO;
+ *strength = 0;
- tuner_dbg("TEA5761 radio ST GET = %02x\n", rc);
+ if (0 == tea5761_read_status(fe, buffer))
+ *strength = tea5761_signal(fe, buffer);
- return (rc ? V4L2_TUNER_SUB_STEREO : 0);
+ return 0;
}
-int tea5761_autodetection(struct i2c_client *c)
+int tea5761_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr)
{
unsigned char buffer[16];
int rc;
- struct tuner *t = i2c_get_clientdata(c);
+ struct tuner_i2c_props i2c = { .adap = i2c_adap, .addr = i2c_addr };
- if (16 != (rc = i2c_master_recv(c, buffer, 16))) {
- tuner_warn("it is not a TEA5761. Received %i chars.\n", rc);
+ if (16 != (rc = tuner_i2c_xfer_recv(&i2c, buffer, 16))) {
+ printk(KERN_WARNING "it is not a TEA5761. Received %i chars.\n", rc);
return EINVAL;
}
if (!((buffer[13] != 0x2b) || (buffer[14] != 0x57) || (buffer[15] != 0x061))) {
- tuner_warn("Manufacturer ID= 0x%02x, Chip ID = %02x%02x. It is not a TEA5761\n",buffer[13],buffer[14],buffer[15]);
+ printk(KERN_WARNING "Manufacturer ID= 0x%02x, Chip ID = %02x%02x. It is not a TEA5761\n",buffer[13],buffer[14],buffer[15]);
return EINVAL;
}
- tuner_warn("TEA5761 detected.\n");
+ printk(KERN_WARNING "TEA5761 detected.\n");
return 0;
}
-static struct tuner_operations tea5761_tuner_ops = {
- .set_tv_freq = set_tv_freq,
- .set_radio_freq = set_radio_freq,
- .has_signal = tea5761_signal,
- .is_stereo = tea5761_stereo,
+static int tea5761_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+
+ return 0;
+}
+
+static int tea5761_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct tea5761_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static struct dvb_tuner_ops tea5761_tuner_ops = {
+ .info = {
+ .name = "tea5761", // Philips TEA5761HN FM Radio
+ },
+ .set_analog_params = set_radio_freq,
+ .release = tea5761_release,
+ .get_frequency = tea5761_get_frequency,
+ .get_status = tea5761_get_status,
+ .get_rf_strength = tea5761_get_rf_strength,
};
-int tea5761_tuner_init(struct i2c_client *c)
+struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe,
+ struct i2c_adapter* i2c_adap,
+ u8 i2c_addr)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct tea5761_priv *priv = NULL;
- if (tea5761_autodetection(c) == EINVAL)
- return EINVAL;
+ if (tea5761_autodetection(i2c_adap, i2c_addr) == EINVAL)
+ return NULL;
+
+ priv = kzalloc(sizeof(struct tea5761_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+ fe->tuner_priv = priv;
+
+ priv->i2c_props.addr = i2c_addr;
+ priv->i2c_props.adap = i2c_adap;
- tuner_info("type set to %d (%s)\n", t->type, "Philips TEA5761HN FM Radio");
- strlcpy(c->name, "tea5761", sizeof(c->name));
+ memcpy(&fe->ops.tuner_ops, &tea5761_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
- memcpy(&t->ops, &tea5761_tuner_ops, sizeof(struct tuner_operations));
+ tuner_info("type set to %s\n", "Philips TEA5761HN FM Radio");
- return (0);
+ return fe;
}
+
+
+EXPORT_SYMBOL_GPL(tea5761_attach);
+EXPORT_SYMBOL_GPL(tea5761_autodetection);
+
+MODULE_DESCRIPTION("Philips TEA5761 FM tuner driver");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/tea5761.h b/drivers/media/video/tea5761.h
new file mode 100644
index 00000000000..73a03b42784
--- /dev/null
+++ b/drivers/media/video/tea5761.h
@@ -0,0 +1,47 @@
+/*
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __TEA5761_H__
+#define __TEA5761_H__
+
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+
+#if defined(CONFIG_TUNER_TEA5761) || (defined(CONFIG_TUNER_TEA5761_MODULE) && defined(MODULE))
+extern int tea5761_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr);
+
+extern struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe,
+ struct i2c_adapter* i2c_adap,
+ u8 i2c_addr);
+#else
+static inline int tea5761_autodetection(struct i2c_adapter* i2c_adap,
+ u8 i2c_addr)
+{
+ printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
+ __FUNCTION__);
+ return -EINVAL;
+}
+
+static inline struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe,
+ struct i2c_adapter* i2c_adap,
+ u8 i2c_addr)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif
+
+#endif /* __TEA5761_H__ */
diff --git a/drivers/media/video/tea5767.c b/drivers/media/video/tea5767.c
index 4985d47a508..71df419df7b 100644
--- a/drivers/media/video/tea5767.c
+++ b/drivers/media/video/tea5767.c
@@ -11,14 +11,22 @@
*/
#include <linux/i2c.h>
-#include <linux/videodev.h>
#include <linux/delay.h>
-#include "tuner-driver.h"
+#include <linux/videodev.h>
+#include "tuner-i2c.h"
+#include "tea5767.h"
-#define PREFIX "TEA5767 "
+static int debug = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable verbose debug messages");
-/* from tuner-core.c */
-extern int tuner_debug;
+#define PREFIX "tea5767 "
+
+struct tea5767_priv {
+ struct tuner_i2c_props i2c_props;
+
+ u32 frequency;
+};
/*****************************************************************************/
@@ -129,13 +137,6 @@ enum tea5767_xtal_freq {
/*****************************************************************************/
-static void set_tv_freq(struct i2c_client *c, unsigned int freq)
-{
- struct tuner *t = i2c_get_clientdata(c);
-
- tuner_warn("This tuner doesn't support TV freq.\n");
-}
-
static void tea5767_status_dump(unsigned char *buffer)
{
unsigned int div, frq;
@@ -190,14 +191,16 @@ static void tea5767_status_dump(unsigned char *buffer)
}
/* Freq should be specifyed at 62.5 Hz */
-static void set_radio_freq(struct i2c_client *c, unsigned int frq)
+static int set_radio_freq(struct dvb_frontend *fe,
+ struct analog_parameters *params)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct tea5767_priv *priv = fe->tuner_priv;
+ unsigned int frq = params->frequency;
unsigned char buffer[5];
unsigned div;
int rc;
- tuner_dbg (PREFIX "radio freq = %d.%03d MHz\n", frq/16000,(frq/16)%1000);
+ tuner_dbg("radio freq = %d.%03d MHz\n", frq/16000,(frq/16)%1000);
/* Rounds freq to next decimal value - for 62.5 KHz step */
/* frq = 20*(frq/16)+radio_frq[frq%16]; */
@@ -207,7 +210,7 @@ static void set_radio_freq(struct i2c_client *c, unsigned int frq)
TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND;
buffer[4] = 0;
- if (t->audmode == V4L2_TUNER_MODE_MONO) {
+ if (params->audmode == V4L2_TUNER_MODE_MONO) {
tuner_dbg("TEA5767 set to mono\n");
buffer[2] |= TEA5767_MONO;
} else {
@@ -217,26 +220,26 @@ static void set_radio_freq(struct i2c_client *c, unsigned int frq)
/* Should be replaced */
switch (TEA5767_HIGH_LO_32768) {
case TEA5767_HIGH_LO_13MHz:
- tuner_dbg ("TEA5767 radio HIGH LO inject xtal @ 13 MHz\n");
+ tuner_dbg("radio HIGH LO inject xtal @ 13 MHz\n");
buffer[2] |= TEA5767_HIGH_LO_INJECT;
buffer[4] |= TEA5767_PLLREF_ENABLE;
div = (frq * (4000 / 16) + 700000 + 225000 + 25000) / 50000;
break;
case TEA5767_LOW_LO_13MHz:
- tuner_dbg ("TEA5767 radio LOW LO inject xtal @ 13 MHz\n");
+ tuner_dbg("radio LOW LO inject xtal @ 13 MHz\n");
buffer[4] |= TEA5767_PLLREF_ENABLE;
div = (frq * (4000 / 16) - 700000 - 225000 + 25000) / 50000;
break;
case TEA5767_LOW_LO_32768:
- tuner_dbg ("TEA5767 radio LOW LO inject xtal @ 32,768 MHz\n");
+ tuner_dbg("radio LOW LO inject xtal @ 32,768 MHz\n");
buffer[3] |= TEA5767_XTAL_32768;
/* const 700=4000*175 Khz - to adjust freq to right value */
div = ((frq * (4000 / 16) - 700000 - 225000) + 16384) >> 15;
break;
case TEA5767_HIGH_LO_32768:
default:
- tuner_dbg ("TEA5767 radio HIGH LO inject xtal @ 32,768 MHz\n");
+ tuner_dbg("radio HIGH LO inject xtal @ 32,768 MHz\n");
buffer[2] |= TEA5767_HIGH_LO_INJECT;
buffer[3] |= TEA5767_XTAL_32768;
@@ -246,51 +249,89 @@ static void set_radio_freq(struct i2c_client *c, unsigned int frq)
buffer[0] = (div >> 8) & 0x3f;
buffer[1] = div & 0xff;
- if (5 != (rc = i2c_master_send(c, buffer, 5)))
+ if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5)))
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
- if (tuner_debug) {
- if (5 != (rc = i2c_master_recv(c, buffer, 5)))
+ if (debug) {
+ if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5)))
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
else
tea5767_status_dump(buffer);
}
+
+ priv->frequency = frq * 125 / 2;
+
+ return 0;
}
-static int tea5767_signal(struct i2c_client *c)
+static int tea5767_read_status(struct dvb_frontend *fe, char *buffer)
{
- unsigned char buffer[5];
+ struct tea5767_priv *priv = fe->tuner_priv;
int rc;
- struct tuner *t = i2c_get_clientdata(c);
- memset(buffer, 0, sizeof(buffer));
- if (5 != (rc = i2c_master_recv(c, buffer, 5)))
+ memset(buffer, 0, 5);
+ if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5))) {
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static inline int tea5767_signal(struct dvb_frontend *fe, const char *buffer)
+{
+ struct tea5767_priv *priv = fe->tuner_priv;
+
+ int signal = ((buffer[3] & TEA5767_ADC_LEVEL_MASK) << 8);
+
+ tuner_dbg("Signal strength: %d\n", signal);
+
+ return signal;
+}
+
+static inline int tea5767_stereo(struct dvb_frontend *fe, const char *buffer)
+{
+ struct tea5767_priv *priv = fe->tuner_priv;
+
+ int stereo = buffer[2] & TEA5767_STEREO_MASK;
+
+ tuner_dbg("Radio ST GET = %02x\n", stereo);
- return ((buffer[3] & TEA5767_ADC_LEVEL_MASK) << 8);
+ return (stereo ? V4L2_TUNER_SUB_STEREO : 0);
}
-static int tea5767_stereo(struct i2c_client *c)
+static int tea5767_get_status(struct dvb_frontend *fe, u32 *status)
{
unsigned char buffer[5];
- int rc;
- struct tuner *t = i2c_get_clientdata(c);
- memset(buffer, 0, sizeof(buffer));
- if (5 != (rc = i2c_master_recv(c, buffer, 5)))
- tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
+ *status = 0;
+
+ if (0 == tea5767_read_status(fe, buffer)) {
+ if (tea5767_signal(fe, buffer))
+ *status = TUNER_STATUS_LOCKED;
+ if (tea5767_stereo(fe, buffer))
+ *status |= TUNER_STATUS_STEREO;
+ }
+
+ return 0;
+}
- rc = buffer[2] & TEA5767_STEREO_MASK;
+static int tea5767_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ unsigned char buffer[5];
- tuner_dbg("TEA5767 radio ST GET = %02x\n", rc);
+ *strength = 0;
- return ((buffer[2] & TEA5767_STEREO_MASK) ? V4L2_TUNER_SUB_STEREO : 0);
+ if (0 == tea5767_read_status(fe, buffer))
+ *strength = tea5767_signal(fe, buffer);
+
+ return 0;
}
-static void tea5767_standby(struct i2c_client *c)
+static int tea5767_standby(struct dvb_frontend *fe)
{
unsigned char buffer[5];
- struct tuner *t = i2c_get_clientdata(c);
+ struct tea5767_priv *priv = fe->tuner_priv;
unsigned div, rc;
div = (87500 * 4 + 700 + 225 + 25) / 50; /* Set frequency to 87.5 MHz */
@@ -301,25 +342,27 @@ static void tea5767_standby(struct i2c_client *c)
TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND | TEA5767_STDBY;
buffer[4] = 0;
- if (5 != (rc = i2c_master_send(c, buffer, 5)))
+ if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5)))
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
+
+ return 0;
}
-int tea5767_autodetection(struct i2c_client *c)
+int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr)
{
+ struct tuner_i2c_props i2c = { .adap = i2c_adap, .addr = i2c_addr };
unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
int rc;
- struct tuner *t = i2c_get_clientdata(c);
- if ((rc = i2c_master_recv(c, buffer, 7))< 5) {
- tuner_warn("It is not a TEA5767. Received %i bytes.\n", rc);
+ if ((rc = tuner_i2c_xfer_recv(&i2c, buffer, 7))< 5) {
+ printk(KERN_WARNING "It is not a TEA5767. Received %i bytes.\n", rc);
return EINVAL;
}
/* If all bytes are the same then it's a TV tuner and not a tea5767 */
if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&
buffer[0] == buffer[3] && buffer[0] == buffer[4]) {
- tuner_warn("All bytes are equal. It is not a TEA5767\n");
+ printk(KERN_WARNING "All bytes are equal. It is not a TEA5767\n");
return EINVAL;
}
@@ -329,36 +372,74 @@ int tea5767_autodetection(struct i2c_client *c)
* Byte 5: bit 7:0 : == 0
*/
if (((buffer[3] & 0x0f) != 0x00) || (buffer[4] != 0x00)) {
- tuner_warn("Chip ID is not zero. It is not a TEA5767\n");
+ printk(KERN_WARNING "Chip ID is not zero. It is not a TEA5767\n");
return EINVAL;
}
/* It seems that tea5767 returns 0xff after the 5th byte */
if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) {
- tuner_warn("Returned more than 5 bytes. It is not a TEA5767\n");
+ printk(KERN_WARNING "Returned more than 5 bytes. It is not a TEA5767\n");
return EINVAL;
}
- tuner_warn("TEA5767 detected.\n");
+ printk(KERN_WARNING "TEA5767 detected.\n");
return 0;
}
-static struct tuner_operations tea5767_tuner_ops = {
- .set_tv_freq = set_tv_freq,
- .set_radio_freq = set_radio_freq,
- .has_signal = tea5767_signal,
- .is_stereo = tea5767_stereo,
- .standby = tea5767_standby,
+static int tea5767_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+
+ return 0;
+}
+
+static int tea5767_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct tea5767_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static struct dvb_tuner_ops tea5767_tuner_ops = {
+ .info = {
+ .name = "tea5767", // Philips TEA5767HN FM Radio
+ },
+
+ .set_analog_params = set_radio_freq,
+ .sleep = tea5767_standby,
+ .release = tea5767_release,
+ .get_frequency = tea5767_get_frequency,
+ .get_status = tea5767_get_status,
+ .get_rf_strength = tea5767_get_rf_strength,
};
-int tea5767_tuner_init(struct i2c_client *c)
+struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe,
+ struct i2c_adapter* i2c_adap,
+ u8 i2c_addr)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct tea5767_priv *priv = NULL;
+
+ priv = kzalloc(sizeof(struct tea5767_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+ fe->tuner_priv = priv;
+
+ priv->i2c_props.addr = i2c_addr;
+ priv->i2c_props.adap = i2c_adap;
- tuner_info("type set to %d (%s)\n", t->type, "Philips TEA5767HN FM Radio");
- strlcpy(c->name, "tea5767", sizeof(c->name));
+ memcpy(&fe->ops.tuner_ops, &tea5767_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
- memcpy(&t->ops, &tea5767_tuner_ops, sizeof(struct tuner_operations));
+ tuner_info("type set to %s\n", "Philips TEA5767HN FM Radio");
- return (0);
+ return fe;
}
+
+
+EXPORT_SYMBOL_GPL(tea5767_attach);
+EXPORT_SYMBOL_GPL(tea5767_autodetection);
+
+MODULE_DESCRIPTION("Philips TEA5767 FM tuner driver");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/tea5767.h b/drivers/media/video/tea5767.h
new file mode 100644
index 00000000000..5d78281adcc
--- /dev/null
+++ b/drivers/media/video/tea5767.h
@@ -0,0 +1,47 @@
+/*
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __TEA5767_H__
+#define __TEA5767_H__
+
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+
+#if defined(CONFIG_TUNER_TEA5767) || (defined(CONFIG_TUNER_TEA5767_MODULE) && defined(MODULE))
+extern int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr);
+
+extern struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe,
+ struct i2c_adapter* i2c_adap,
+ u8 i2c_addr);
+#else
+static inline int tea5767_autodetection(struct i2c_adapter* i2c_adap,
+ u8 i2c_addr)
+{
+ printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
+ __FUNCTION__);
+ return -EINVAL;
+}
+
+static inline struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe,
+ struct i2c_adapter* i2c_adap,
+ u8 i2c_addr)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif
+
+#endif /* __TEA5767_H__ */
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index e646465464a..94843086cda 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -5,7 +5,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/timer.h>
@@ -15,12 +14,17 @@
#include <linux/poll.h>
#include <linux/i2c.h>
#include <linux/types.h>
-#include <linux/videodev.h>
#include <linux/init.h>
-
+#include <linux/videodev.h>
#include <media/tuner.h>
+#include <media/tuner-types.h>
#include <media/v4l2-common.h>
#include "tuner-driver.h"
+#include "mt20xx.h"
+#include "tda8290.h"
+#include "tea5761.h"
+#include "tea5767.h"
+#include "tuner-simple.h"
#define UNSET (-1U)
@@ -72,6 +76,51 @@ static struct i2c_client client_template;
/* ---------------------------------------------------------------------- */
+static void fe_set_freq(struct tuner *t, unsigned int freq)
+{
+ struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
+
+ struct analog_parameters params = {
+ .frequency = freq,
+ .mode = t->mode,
+ .audmode = t->audmode,
+ .std = t->std
+ };
+
+ if (NULL == fe_tuner_ops->set_analog_params) {
+ tuner_warn("Tuner frontend module has no way to set freq\n");
+ return;
+ }
+ fe_tuner_ops->set_analog_params(&t->fe, &params);
+}
+
+static void fe_release(struct tuner *t)
+{
+ struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
+
+ if (fe_tuner_ops->release)
+ fe_tuner_ops->release(&t->fe);
+}
+
+static void fe_standby(struct tuner *t)
+{
+ struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
+
+ if (fe_tuner_ops->sleep)
+ fe_tuner_ops->sleep(&t->fe);
+}
+
+static int fe_has_signal(struct tuner *t)
+{
+ struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
+ u16 strength;
+
+ if (fe_tuner_ops->get_rf_strength)
+ fe_tuner_ops->get_rf_strength(&t->fe, &strength);
+
+ return strength;
+}
+
/* Set tuner frequency, freq in Units of 62.5kHz = 1/16MHz */
static void set_tv_freq(struct i2c_client *c, unsigned int freq)
{
@@ -96,7 +145,7 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq)
else
freq = tv_range[1] * 16;
}
- t->ops.set_tv_freq(c, freq);
+ t->ops.set_tv_freq(t, freq);
}
static void set_radio_freq(struct i2c_client *c, unsigned int freq)
@@ -123,7 +172,7 @@ static void set_radio_freq(struct i2c_client *c, unsigned int freq)
freq = radio_range[1] * 16000;
}
- t->ops.set_radio_freq(c, freq);
+ t->ops.set_radio_freq(t, freq);
}
static void set_freq(struct i2c_client *c, unsigned long freq)
@@ -147,11 +196,51 @@ static void set_freq(struct i2c_client *c, unsigned long freq)
}
}
+static void tuner_i2c_address_check(struct tuner *t)
+{
+ if ((t->type == UNSET || t->type == TUNER_ABSENT) ||
+ ((t->i2c.addr < 0x64) || (t->i2c.addr > 0x6f)))
+ return;
+
+ tuner_warn("====================== WARNING! ======================\n");
+ tuner_warn("Support for tuners in i2c address range 0x64 thru 0x6f\n");
+ tuner_warn("will soon be dropped. This message indicates that your\n");
+ tuner_warn("hardware has a %s tuner at i2c address 0x%02x.\n",
+ t->i2c.name, t->i2c.addr);
+ tuner_warn("To ensure continued support for your device, please\n");
+ tuner_warn("send a copy of this message, along with full dmesg\n");
+ tuner_warn("output to v4l-dvb-maintainer@linuxtv.org\n");
+ tuner_warn("Please use subject line: \"obsolete tuner i2c address.\"\n");
+ tuner_warn("driver: %s, addr: 0x%02x, type: %d (%s)\n",
+ t->i2c.adapter->name, t->i2c.addr, t->type,
+ tuners[t->type].name);
+ tuner_warn("====================== WARNING! ======================\n");
+}
+
+static void attach_tda8290(struct tuner *t)
+{
+ struct tda8290_config cfg = {
+ .lna_cfg = &t->config,
+ .tuner_callback = t->tuner_callback
+ };
+ tda8290_attach(&t->fe, t->i2c.adapter, t->i2c.addr, &cfg);
+}
+
+static void attach_simple_tuner(struct tuner *t)
+{
+ struct simple_tuner_config cfg = {
+ .type = t->type,
+ .tun = &tuners[t->type]
+ };
+ simple_tuner_attach(&t->fe, t->i2c.adapter, t->i2c.addr, &cfg);
+}
+
static void set_type(struct i2c_client *c, unsigned int type,
unsigned int new_mode_mask, unsigned int new_config,
int (*tuner_callback) (void *dev, int command,int arg))
{
struct tuner *t = i2c_get_clientdata(c);
+ struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
unsigned char buffer[4];
if (type == UNSET || type == TUNER_ABSENT) {
@@ -180,7 +269,7 @@ static void set_type(struct i2c_client *c, unsigned int type,
/* discard private data, in case set_type() was previously called */
if (t->ops.release)
- t->ops.release(c);
+ t->ops.release(t);
else {
kfree(t->priv);
t->priv = NULL;
@@ -188,13 +277,15 @@ static void set_type(struct i2c_client *c, unsigned int type,
switch (t->type) {
case TUNER_MT2032:
- microtune_init(c);
+ microtune_attach(&t->fe, t->i2c.adapter, t->i2c.addr);
break;
case TUNER_PHILIPS_TDA8290:
- tda8290_init(c);
+ {
+ attach_tda8290(t);
break;
+ }
case TUNER_TEA5767:
- if (tea5767_tuner_init(c) == EINVAL) {
+ if (tea5767_attach(&t->fe, t->i2c.adapter, t->i2c.addr) == NULL) {
t->type = TUNER_ABSENT;
t->mode_mask = T_UNINITIALIZED;
return;
@@ -203,7 +294,7 @@ static void set_type(struct i2c_client *c, unsigned int type,
break;
#ifdef CONFIG_TUNER_TEA5761
case TUNER_TEA5761:
- if (tea5761_tuner_init(c) == EINVAL) {
+ if (tea5761_attach(&t->fe, t->i2c.adapter, t->i2c.addr) == NULL) {
t->type = TUNER_ABSENT;
t->mode_mask = T_UNINITIALIZED;
return;
@@ -221,7 +312,7 @@ static void set_type(struct i2c_client *c, unsigned int type,
buffer[2] = 0x86;
buffer[3] = 0x54;
i2c_master_send(c, buffer, 4);
- default_tuner_init(c);
+ attach_simple_tuner(t);
break;
case TUNER_PHILIPS_TD1316:
buffer[0] = 0x0b;
@@ -229,16 +320,28 @@ static void set_type(struct i2c_client *c, unsigned int type,
buffer[2] = 0x86;
buffer[3] = 0xa4;
i2c_master_send(c,buffer,4);
- default_tuner_init(c);
+ attach_simple_tuner(t);
break;
case TUNER_TDA9887:
- tda9887_tuner_init(c);
+ tda9887_tuner_init(t);
break;
default:
- default_tuner_init(c);
+ attach_simple_tuner(t);
break;
}
+ if (fe_tuner_ops->set_analog_params) {
+ strlcpy(t->i2c.name, fe_tuner_ops->info.name, sizeof(t->i2c.name));
+
+ t->ops.set_tv_freq = fe_set_freq;
+ t->ops.set_radio_freq = fe_set_freq;
+ t->ops.standby = fe_standby;
+ t->ops.release = fe_release;
+ t->ops.has_signal = fe_has_signal;
+ }
+
+ tuner_info("type set to %s\n", t->i2c.name);
+
if (t->mode_mask == T_UNINITIALIZED)
t->mode_mask = new_mode_mask;
@@ -246,6 +349,7 @@ static void set_type(struct i2c_client *c, unsigned int type,
tuner_dbg("%s %s I2C addr 0x%02x with type %d used for 0x%02x\n",
c->adapter->name, c->driver->driver.name, c->addr << 1, type,
t->mode_mask);
+ tuner_i2c_address_check(t);
}
/*
@@ -406,10 +510,10 @@ static int tuner_fixup_std(struct tuner *t)
return 0;
}
-static void tuner_status(struct i2c_client *client)
+static void tuner_status(struct tuner *t)
{
- struct tuner *t = i2c_get_clientdata(client);
unsigned long freq, freq_fraction;
+ struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
const char *p;
switch (t->mode) {
@@ -430,11 +534,20 @@ static void tuner_status(struct i2c_client *client)
tuner_info("Standard: 0x%08lx\n", (unsigned long)t->std);
if (t->mode != V4L2_TUNER_RADIO)
return;
+ if (fe_tuner_ops->get_status) {
+ u32 tuner_status;
+
+ fe_tuner_ops->get_status(&t->fe, &tuner_status);
+ if (tuner_status & TUNER_STATUS_LOCKED)
+ tuner_info("Tuner is locked.\n");
+ if (tuner_status & TUNER_STATUS_STEREO)
+ tuner_info("Stereo: yes\n");
+ }
if (t->ops.has_signal) {
- tuner_info("Signal strength: %d\n", t->ops.has_signal(client));
+ tuner_info("Signal strength: %d\n", t->ops.has_signal(t));
}
if (t->ops.is_stereo) {
- tuner_info("Stereo: %s\n", t->ops.is_stereo(client) ? "yes" : "no");
+ tuner_info("Stereo: %s\n", t->ops.is_stereo(t) ? "yes" : "no");
}
}
@@ -483,7 +596,7 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
switch (addr) {
#ifdef CONFIG_TUNER_TEA5761
case 0x10:
- if (tea5761_autodetection(&t->i2c) != EINVAL) {
+ if (tea5761_autodetection(t->i2c.adapter, t->i2c.addr) != EINVAL) {
t->type = TUNER_TEA5761;
t->mode_mask = T_RADIO;
t->mode = T_STANDBY;
@@ -500,7 +613,7 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
case 0x4b:
/* If chip is not tda8290, don't register.
since it can be tda9887*/
- if (tda8290_probe(&t->i2c) == 0) {
+ if (tda8290_probe(t->i2c.adapter, t->i2c.addr) == 0) {
tuner_dbg("chip at addr %x is a tda8290\n", addr);
} else {
/* Default is being tda9887 */
@@ -511,7 +624,7 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
}
break;
case 0x60:
- if (tea5767_autodetection(&t->i2c) != EINVAL) {
+ if (tea5767_autodetection(t->i2c.adapter, t->i2c.addr) != EINVAL) {
t->type = TUNER_TEA5767;
t->mode_mask = T_RADIO;
t->mode = T_STANDBY;
@@ -548,6 +661,28 @@ static int tuner_probe(struct i2c_adapter *adap)
normal_i2c[1] = I2C_CLIENT_END;
}
+ /* HACK: Ignore 0x6b and 0x6f on cx88 boards.
+ * FusionHDTV5 RT Gold has an ir receiver at 0x6b
+ * and an RTC at 0x6f which can get corrupted if probed.
+ */
+ if ((adap->id == I2C_HW_B_CX2388x) ||
+ (adap->id == I2C_HW_B_CX23885)) {
+ unsigned int i = 0;
+
+ while (i < I2C_CLIENT_MAX_OPTS && ignore[i] != I2C_CLIENT_END)
+ i += 2;
+ if (i + 4 < I2C_CLIENT_MAX_OPTS) {
+ ignore[i+0] = adap->nr;
+ ignore[i+1] = 0x6b;
+ ignore[i+2] = adap->nr;
+ ignore[i+3] = 0x6f;
+ ignore[i+4] = I2C_CLIENT_END;
+ } else
+ printk(KERN_WARNING "tuner: "
+ "too many options specified "
+ "in i2c probe ignore list!\n");
+ }
+
default_mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
if (adap->class & I2C_CLASS_TV_ANALOG)
@@ -568,7 +703,7 @@ static int tuner_detach(struct i2c_client *client)
}
if (t->ops.release)
- t->ops.release(client);
+ t->ops.release(t);
else {
kfree(t->priv);
}
@@ -593,7 +728,7 @@ static inline int set_mode(struct i2c_client *client, struct tuner *t, int mode,
if (check_mode(t, cmd) == EINVAL) {
t->mode = T_STANDBY;
if (t->ops.standby)
- t->ops.standby (client);
+ t->ops.standby(t);
return EINVAL;
}
return 0;
@@ -615,6 +750,7 @@ static inline int check_v4l2(struct tuner *t)
static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
{
struct tuner *t = i2c_get_clientdata(client);
+ struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
if (tuner_debug>1)
v4l_i2c_print_ioctl(&(t->i2c),cmd);
@@ -642,7 +778,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
return 0;
t->mode = T_STANDBY;
if (t->ops.standby)
- t->ops.standby (client);
+ t->ops.standby(t);
break;
#ifdef CONFIG_VIDEO_V4L1
case VIDIOCSAUDIO:
@@ -701,16 +837,27 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
return 0;
if (V4L2_TUNER_RADIO == t->mode) {
- if (t->ops.has_signal)
- vt->signal = t->ops.has_signal(client);
- if (t->ops.is_stereo) {
- if (t->ops.is_stereo(client))
- vt->flags |=
- VIDEO_TUNER_STEREO_ON;
+ if (fe_tuner_ops->get_status) {
+ u32 tuner_status;
+
+ fe_tuner_ops->get_status(&t->fe, &tuner_status);
+ if (tuner_status & TUNER_STATUS_STEREO)
+ vt->flags |= VIDEO_TUNER_STEREO_ON;
else
- vt->flags &=
- ~VIDEO_TUNER_STEREO_ON;
+ vt->flags &= ~VIDEO_TUNER_STEREO_ON;
+ } else {
+ if (t->ops.is_stereo) {
+ if (t->ops.is_stereo(t))
+ vt->flags |=
+ VIDEO_TUNER_STEREO_ON;
+ else
+ vt->flags &=
+ ~VIDEO_TUNER_STEREO_ON;
+ }
}
+ if (t->ops.has_signal)
+ vt->signal = t->ops.has_signal(t);
+
vt->flags |= VIDEO_TUNER_LOW; /* Allow freqs at 62.5 Hz */
vt->rangelow = radio_range[0] * 16000;
@@ -732,9 +879,17 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
if (check_v4l2(t) == EINVAL)
return 0;
- if (V4L2_TUNER_RADIO == t->mode && t->ops.is_stereo)
- va->mode = t->ops.is_stereo(client)
- ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO;
+ if (V4L2_TUNER_RADIO == t->mode) {
+ if (fe_tuner_ops->get_status) {
+ u32 tuner_status;
+
+ fe_tuner_ops->get_status(&t->fe, &tuner_status);
+ va->mode = (tuner_status & TUNER_STATUS_STEREO)
+ ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO;
+ } else if (t->ops.is_stereo)
+ va->mode = t->ops.is_stereo(t)
+ ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO;
+ }
return 0;
}
#endif
@@ -785,6 +940,15 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
return 0;
switch_v4l2();
f->type = t->mode;
+ if (fe_tuner_ops->get_frequency) {
+ u32 abs_freq;
+
+ fe_tuner_ops->get_frequency(&t->fe, &abs_freq);
+ f->frequency = (V4L2_TUNER_RADIO == t->mode) ?
+ (abs_freq * 2 + 125/2) / 125 :
+ (abs_freq + 62500/2) / 62500;
+ break;
+ }
f->frequency = (V4L2_TUNER_RADIO == t->mode) ?
t->radio_freq : t->tv_freq;
break;
@@ -799,7 +963,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
tuner->type = t->mode;
if (t->ops.get_afc)
- tuner->afc=t->ops.get_afc(client);
+ tuner->afc=t->ops.get_afc(t);
if (t->mode == V4L2_TUNER_ANALOG_TV)
tuner->capability |= V4L2_TUNER_CAP_NORM;
if (t->mode != V4L2_TUNER_RADIO) {
@@ -809,16 +973,22 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
}
/* radio mode */
- if (t->ops.has_signal)
- tuner->signal = t->ops.has_signal(client);
-
tuner->rxsubchans =
V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
- if (t->ops.is_stereo) {
- tuner->rxsubchans = t->ops.is_stereo(client) ?
+ if (fe_tuner_ops->get_status) {
+ u32 tuner_status;
+
+ fe_tuner_ops->get_status(&t->fe, &tuner_status);
+ tuner->rxsubchans = (tuner_status & TUNER_STATUS_STEREO) ?
V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO;
+ } else {
+ if (t->ops.is_stereo) {
+ tuner->rxsubchans = t->ops.is_stereo(t) ?
+ V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO;
+ }
}
-
+ if (t->ops.has_signal)
+ tuner->signal = t->ops.has_signal(t);
tuner->capability |=
V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
tuner->audmode = t->audmode;
@@ -844,7 +1014,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
}
case VIDIOC_LOG_STATUS:
if (t->ops.tuner_status)
- t->ops.tuner_status(client);
+ t->ops.tuner_status(t);
break;
}
diff --git a/drivers/media/video/tuner-driver.h b/drivers/media/video/tuner-driver.h
index 0334a912507..28a10da76d1 100644
--- a/drivers/media/video/tuner-driver.h
+++ b/drivers/media/video/tuner-driver.h
@@ -19,23 +19,27 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __TUNER_HW_H__
-#define __TUNER_HW_H__
+#ifndef __TUNER_DRIVER_H__
+#define __TUNER_DRIVER_H__
#include <linux/videodev2.h>
#include <linux/i2c.h>
+#include "tuner-i2c.h"
+#include "dvb_frontend.h"
extern unsigned const int tuner_count;
+struct tuner;
+
struct tuner_operations {
- void (*set_tv_freq)(struct i2c_client *c, unsigned int freq);
- void (*set_radio_freq)(struct i2c_client *c, unsigned int freq);
- int (*has_signal)(struct i2c_client *c);
- int (*is_stereo)(struct i2c_client *c);
- int (*get_afc)(struct i2c_client *c);
- void (*tuner_status)(struct i2c_client *c);
- void (*standby)(struct i2c_client *c);
- void (*release)(struct i2c_client *c);
+ void (*set_tv_freq)(struct tuner *t, unsigned int freq);
+ void (*set_radio_freq)(struct tuner *t, unsigned int freq);
+ int (*has_signal)(struct tuner *t);
+ int (*is_stereo)(struct tuner *t);
+ int (*get_afc)(struct tuner *t);
+ void (*tuner_status)(struct tuner *t);
+ void (*standby)(struct tuner *t);
+ void (*release)(struct tuner *t);
};
struct tuner {
@@ -49,13 +53,14 @@ struct tuner {
unsigned int tv_freq; /* keep track of the current settings */
unsigned int radio_freq;
- u16 last_div;
unsigned int audmode;
v4l2_std_id std;
int using_v4l2;
void *priv;
+ struct dvb_frontend fe;
+
/* used by tda9887 */
unsigned int tda9887_config;
@@ -67,20 +72,7 @@ struct tuner {
/* ------------------------------------------------------------------------ */
-extern int default_tuner_init(struct i2c_client *c);
-
-extern int tda9887_tuner_init(struct i2c_client *c);
-
-extern int microtune_init(struct i2c_client *c);
-
-extern int tda8290_init(struct i2c_client *c);
-extern int tda8290_probe(struct i2c_client *c);
-
-extern int tea5761_tuner_init(struct i2c_client *c);
-extern int tea5761_autodetection(struct i2c_client *c);
-
-extern int tea5767_autodetection(struct i2c_client *c);
-extern int tea5767_tuner_init(struct i2c_client *c);
+extern int tda9887_tuner_init(struct tuner *t);
/* ------------------------------------------------------------------------ */
@@ -96,7 +88,7 @@ extern int tea5767_tuner_init(struct i2c_client *c);
printk(KERN_DEBUG "%s %d-%04x: " fmt, t->i2c.driver->driver.name, \
i2c_adapter_id(t->i2c.adapter), t->i2c.addr , ##arg); } while (0)
-#endif /* __TUNER_HW_H__ */
+#endif /* __TUNER_DRIVER_H__ */
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
diff --git a/drivers/media/video/tuner-i2c.h b/drivers/media/video/tuner-i2c.h
new file mode 100644
index 00000000000..159019ec337
--- /dev/null
+++ b/drivers/media/video/tuner-i2c.h
@@ -0,0 +1,70 @@
+/*
+ tuner-i2c.h - i2c interface for different tuners
+
+ Copyright (C) 2007 Michael Krufky (mkrufky@linuxtv.org)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __TUNER_I2C_H__
+#define __TUNER_I2C_H__
+
+#include <linux/i2c.h>
+
+struct tuner_i2c_props {
+ u8 addr;
+ struct i2c_adapter *adap;
+};
+
+static inline int tuner_i2c_xfer_send(struct tuner_i2c_props *props, char *buf, int len)
+{
+ struct i2c_msg msg = { .addr = props->addr, .flags = 0,
+ .buf = buf, .len = len };
+ int ret = i2c_transfer(props->adap, &msg, 1);
+
+ return (ret == 1) ? len : ret;
+}
+
+static inline int tuner_i2c_xfer_recv(struct tuner_i2c_props *props, char *buf, int len)
+{
+ struct i2c_msg msg = { .addr = props->addr, .flags = I2C_M_RD,
+ .buf = buf, .len = len };
+ int ret = i2c_transfer(props->adap, &msg, 1);
+
+ return (ret == 1) ? len : ret;
+}
+
+#ifndef __TUNER_DRIVER_H__
+#define tuner_warn(fmt, arg...) do {\
+ printk(KERN_WARNING PREFIX "%d-%04x: " fmt, \
+ i2c_adapter_id(priv->i2c_props.adap), priv->i2c_props.addr , ##arg); } while (0)
+#define tuner_info(fmt, arg...) do {\
+ printk(KERN_INFO PREFIX "%d-%04x: " fmt, \
+ i2c_adapter_id(priv->i2c_props.adap), priv->i2c_props.addr , ##arg); } while (0)
+#define tuner_dbg(fmt, arg...) do {\
+ if ((debug)) \
+ printk(KERN_DEBUG PREFIX "%d-%04x: " fmt, \
+ i2c_adapter_id(priv->i2c_props.adap), priv->i2c_props.addr , ##arg); } while (0)
+#endif /* __TUNER_DRIVER_H__ */
+
+#endif /* __TUNER_I2C_H__ */
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c
index 2d57e8bc0db..7b93d3b1f4c 100644
--- a/drivers/media/video/tuner-simple.c
+++ b/drivers/media/video/tuner-simple.c
@@ -1,7 +1,8 @@
/*
- *
* i2c tv tuner chip device driver
* controls all those simple 4-control-bytes style tuners.
+ *
+ * This "tuner-simple" module was split apart from the original "tuner" module.
*/
#include <linux/delay.h>
#include <linux/i2c.h>
@@ -9,7 +10,14 @@
#include <media/tuner.h>
#include <media/v4l2-common.h>
#include <media/tuner-types.h>
-#include "tuner-driver.h"
+#include "tuner-i2c.h"
+#include "tuner-simple.h"
+
+static int debug = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable verbose debug messages");
+
+#define PREFIX "tuner-simple "
static int offset = 0;
module_param(offset, int, 0664);
@@ -82,59 +90,102 @@ MODULE_PARM_DESC(offset,"Allows to specify an offset for tuner");
#define TUNER_PLL_LOCKED 0x40
#define TUNER_STEREO_MK3 0x04
+struct tuner_simple_priv {
+ u16 last_div;
+ struct tuner_i2c_props i2c_props;
+
+ unsigned int type;
+ struct tunertype *tun;
+
+ u32 frequency;
+};
+
/* ---------------------------------------------------------------------- */
-static int tuner_getstatus(struct i2c_client *c)
+static int tuner_read_status(struct dvb_frontend *fe)
{
+ struct tuner_simple_priv *priv = fe->tuner_priv;
unsigned char byte;
- if (1 != i2c_master_recv(c,&byte,1))
+ if (1 != tuner_i2c_xfer_recv(&priv->i2c_props,&byte,1))
return 0;
return byte;
}
-static int tuner_signal(struct i2c_client *c)
+static inline int tuner_signal(const int status)
{
- return (tuner_getstatus(c) & TUNER_SIGNAL) << 13;
+ return (status & TUNER_SIGNAL) << 13;
}
-static int tuner_stereo(struct i2c_client *c)
+static inline int tuner_stereo(const int type, const int status)
{
- int stereo, status;
- struct tuner *t = i2c_get_clientdata(c);
-
- status = tuner_getstatus (c);
-
- switch (t->type) {
+ switch (type) {
case TUNER_PHILIPS_FM1216ME_MK3:
case TUNER_PHILIPS_FM1236_MK3:
case TUNER_PHILIPS_FM1256_IH3:
case TUNER_LG_NTSC_TAPE:
- stereo = ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3);
- break;
+ return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3);
default:
- stereo = status & TUNER_STEREO;
+ return status & TUNER_STEREO;
}
+}
+
+static inline int tuner_islocked(const int status)
+{
+ return (status & TUNER_FL);
+}
- return stereo;
+static inline int tuner_afcstatus(const int status)
+{
+ return (status & TUNER_AFC) - 2;
}
+static int simple_get_status(struct dvb_frontend *fe, u32 *status)
+{
+ struct tuner_simple_priv *priv = fe->tuner_priv;
+ int tuner_status = tuner_read_status(fe);
+
+ *status = 0;
+
+ if (tuner_islocked(tuner_status))
+ *status = TUNER_STATUS_LOCKED;
+ if (tuner_stereo(priv->type, tuner_status))
+ *status |= TUNER_STATUS_STEREO;
+
+ tuner_dbg("AFC Status: %d\n", tuner_afcstatus(tuner_status));
+
+ return 0;
+}
+
+static int simple_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct tuner_simple_priv *priv = fe->tuner_priv;
+ int signal = tuner_signal(tuner_read_status(fe));
+
+ *strength = signal;
+
+ tuner_dbg("Signal strength: %d\n", signal);
+
+ return 0;
+}
+
/* ---------------------------------------------------------------------- */
-static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
+static int simple_set_tv_freq(struct dvb_frontend *fe,
+ struct analog_parameters *params)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct tuner_simple_priv *priv = fe->tuner_priv;
u8 config, cb, tuneraddr;
u16 div;
struct tunertype *tun;
u8 buffer[4];
int rc, IFPCoff, i, j;
enum param_type desired_type;
- struct tuner_params *params;
+ struct tuner_params *t_params;
- tun = &tuners[t->type];
+ tun = priv->tun;
/* IFPCoff = Video Intermediate Frequency - Vif:
940 =16*58.75 NTSC/J (Japan)
@@ -148,14 +199,14 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
171.2=16*10.70 FM Radio (at set_radio_freq)
*/
- if (t->std == V4L2_STD_NTSC_M_JP) {
+ if (params->std == V4L2_STD_NTSC_M_JP) {
IFPCoff = 940;
desired_type = TUNER_PARAM_TYPE_NTSC;
- } else if ((t->std & V4L2_STD_MN) &&
- !(t->std & ~V4L2_STD_MN)) {
+ } else if ((params->std & V4L2_STD_MN) &&
+ !(params->std & ~V4L2_STD_MN)) {
IFPCoff = 732;
desired_type = TUNER_PARAM_TYPE_NTSC;
- } else if (t->std == V4L2_STD_SECAM_LC) {
+ } else if (params->std == V4L2_STD_SECAM_LC) {
IFPCoff = 543;
desired_type = TUNER_PARAM_TYPE_SECAM;
} else {
@@ -168,49 +219,49 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
continue;
break;
}
- /* use default tuner_params if desired_type not available */
+ /* use default tuner_t_params if desired_type not available */
if (desired_type != tun->params[j].type) {
- tuner_dbg("IFPCoff = %d: tuner_params undefined for tuner %d\n",
- IFPCoff,t->type);
+ tuner_dbg("IFPCoff = %d: tuner_t_params undefined for tuner %d\n",
+ IFPCoff, priv->type);
j = 0;
}
- params = &tun->params[j];
+ t_params = &tun->params[j];
- for (i = 0; i < params->count; i++) {
- if (freq > params->ranges[i].limit)
+ for (i = 0; i < t_params->count; i++) {
+ if (params->frequency > t_params->ranges[i].limit)
continue;
break;
}
- if (i == params->count) {
+ if (i == t_params->count) {
tuner_dbg("TV frequency out of range (%d > %d)",
- freq, params->ranges[i - 1].limit);
- freq = params->ranges[--i].limit;
+ params->frequency, t_params->ranges[i - 1].limit);
+ params->frequency = t_params->ranges[--i].limit;
}
- config = params->ranges[i].config;
- cb = params->ranges[i].cb;
+ config = t_params->ranges[i].config;
+ cb = t_params->ranges[i].cb;
/* i == 0 -> VHF_LO
* i == 1 -> VHF_HI
* i == 2 -> UHF */
tuner_dbg("tv: param %d, range %d\n",j,i);
- div=freq + IFPCoff + offset;
+ div=params->frequency + IFPCoff + offset;
tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, Offset=%d.%02d MHz, div=%0d\n",
- freq / 16, freq % 16 * 100 / 16,
+ params->frequency / 16, params->frequency % 16 * 100 / 16,
IFPCoff / 16, IFPCoff % 16 * 100 / 16,
offset / 16, offset % 16 * 100 / 16,
div);
/* tv norm specific stuff for multi-norm tuners */
- switch (t->type) {
+ switch (priv->type) {
case TUNER_PHILIPS_SECAM: // FI1216MF
/* 0x01 -> ??? no change ??? */
/* 0x02 -> PAL BDGHI / SECAM L */
/* 0x04 -> ??? PAL others / SECAM others ??? */
cb &= ~0x03;
- if (t->std & V4L2_STD_SECAM_L) //also valid for V4L2_STD_SECAM
+ if (params->std & V4L2_STD_SECAM_L) //also valid for V4L2_STD_SECAM
cb |= PHILIPS_MF_SET_STD_L;
- else if (t->std & V4L2_STD_SECAM_LC)
+ else if (params->std & V4L2_STD_SECAM_LC)
cb |= PHILIPS_MF_SET_STD_LC;
else /* V4L2_STD_B|V4L2_STD_GH */
cb |= PHILIPS_MF_SET_STD_BG;
@@ -219,16 +270,16 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
case TUNER_TEMIC_4046FM5:
cb &= ~0x0f;
- if (t->std & V4L2_STD_PAL_BG) {
+ if (params->std & V4L2_STD_PAL_BG) {
cb |= TEMIC_SET_PAL_BG;
- } else if (t->std & V4L2_STD_PAL_I) {
+ } else if (params->std & V4L2_STD_PAL_I) {
cb |= TEMIC_SET_PAL_I;
- } else if (t->std & V4L2_STD_PAL_DK) {
+ } else if (params->std & V4L2_STD_PAL_DK) {
cb |= TEMIC_SET_PAL_DK;
- } else if (t->std & V4L2_STD_SECAM_L) {
+ } else if (params->std & V4L2_STD_SECAM_L) {
cb |= TEMIC_SET_PAL_L;
}
@@ -237,13 +288,13 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
case TUNER_PHILIPS_FQ1216ME:
cb &= ~0x0f;
- if (t->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) {
+ if (params->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) {
cb |= PHILIPS_SET_PAL_BGDK;
- } else if (t->std & V4L2_STD_PAL_I) {
+ } else if (params->std & V4L2_STD_PAL_I) {
cb |= PHILIPS_SET_PAL_I;
- } else if (t->std & V4L2_STD_SECAM_L) {
+ } else if (params->std & V4L2_STD_SECAM_L) {
cb |= PHILIPS_SET_PAL_L;
}
@@ -255,7 +306,7 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
/* 0x02 -> NTSC antenna input 1 */
/* 0x03 -> NTSC antenna input 2 */
cb &= ~0x03;
- if (!(t->std & V4L2_STD_ATSC))
+ if (!(params->std & V4L2_STD_ATSC))
cb |= 2;
/* FIXME: input */
break;
@@ -275,23 +326,23 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
buffer[2] = 0x17;
buffer[3] = 0x00;
cb &= ~0x40;
- if (t->std & V4L2_STD_ATSC) {
+ if (params->std & V4L2_STD_ATSC) {
cb |= 0x40;
buffer[1] = 0x04;
}
/* set to the correct mode (analog or digital) */
- tuneraddr = c->addr;
- c->addr = 0x0a;
- if (2 != (rc = i2c_master_send(c,&buffer[0],2)))
+ tuneraddr = priv->i2c_props.addr;
+ priv->i2c_props.addr = 0x0a;
+ if (2 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,&buffer[0],2)))
tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc);
- if (2 != (rc = i2c_master_send(c,&buffer[2],2)))
+ if (2 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,&buffer[2],2)))
tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc);
- c->addr = tuneraddr;
+ priv->i2c_props.addr = tuneraddr;
/* FIXME: input */
break;
}
- if (params->cb_first_if_lower_freq && div < t->last_div) {
+ if (t_params->cb_first_if_lower_freq && div < priv->last_div) {
buffer[0] = config;
buffer[1] = cb;
buffer[2] = (div>>8) & 0x7f;
@@ -302,53 +353,53 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
buffer[2] = config;
buffer[3] = cb;
}
- t->last_div = div;
- if (params->has_tda9887) {
+ priv->last_div = div;
+ if (t_params->has_tda9887) {
int config = 0;
- int is_secam_l = (t->std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)) &&
- !(t->std & ~(V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC));
+ int is_secam_l = (params->std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)) &&
+ !(params->std & ~(V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC));
- if (t->std == V4L2_STD_SECAM_LC) {
- if (params->port1_active ^ params->port1_invert_for_secam_lc)
+ if (params->std == V4L2_STD_SECAM_LC) {
+ if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc)
config |= TDA9887_PORT1_ACTIVE;
- if (params->port2_active ^ params->port2_invert_for_secam_lc)
+ if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc)
config |= TDA9887_PORT2_ACTIVE;
}
else {
- if (params->port1_active)
+ if (t_params->port1_active)
config |= TDA9887_PORT1_ACTIVE;
- if (params->port2_active)
+ if (t_params->port2_active)
config |= TDA9887_PORT2_ACTIVE;
}
- if (params->intercarrier_mode)
+ if (t_params->intercarrier_mode)
config |= TDA9887_INTERCARRIER;
if (is_secam_l) {
- if (i == 0 && params->default_top_secam_low)
- config |= TDA9887_TOP(params->default_top_secam_low);
- else if (i == 1 && params->default_top_secam_mid)
- config |= TDA9887_TOP(params->default_top_secam_mid);
- else if (params->default_top_secam_high)
- config |= TDA9887_TOP(params->default_top_secam_high);
+ if (i == 0 && t_params->default_top_secam_low)
+ config |= TDA9887_TOP(t_params->default_top_secam_low);
+ else if (i == 1 && t_params->default_top_secam_mid)
+ config |= TDA9887_TOP(t_params->default_top_secam_mid);
+ else if (t_params->default_top_secam_high)
+ config |= TDA9887_TOP(t_params->default_top_secam_high);
}
else {
- if (i == 0 && params->default_top_low)
- config |= TDA9887_TOP(params->default_top_low);
- else if (i == 1 && params->default_top_mid)
- config |= TDA9887_TOP(params->default_top_mid);
- else if (params->default_top_high)
- config |= TDA9887_TOP(params->default_top_high);
+ if (i == 0 && t_params->default_top_low)
+ config |= TDA9887_TOP(t_params->default_top_low);
+ else if (i == 1 && t_params->default_top_mid)
+ config |= TDA9887_TOP(t_params->default_top_mid);
+ else if (t_params->default_top_high)
+ config |= TDA9887_TOP(t_params->default_top_high);
}
- if (params->default_pll_gating_18)
+ if (t_params->default_pll_gating_18)
config |= TDA9887_GATING_18;
- i2c_clients_command(c->adapter, TDA9887_SET_CONFIG, &config);
+ i2c_clients_command(priv->i2c_props.adap, TDA9887_SET_CONFIG, &config);
}
tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
buffer[0],buffer[1],buffer[2],buffer[3]);
- if (4 != (rc = i2c_master_send(c,buffer,4)))
+ if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,4)))
tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc);
- switch (t->type) {
+ switch (priv->type) {
case TUNER_LG_TDVS_H06XF:
/* Set the Auxiliary Byte. */
buffer[0] = buffer[2];
@@ -357,7 +408,7 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
buffer[1] = 0x20;
tuner_dbg("tv 0x%02x 0x%02x\n",buffer[0],buffer[1]);
- if (2 != (rc = i2c_master_send(c,buffer,2)))
+ if (2 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,2)))
tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc);
break;
case TUNER_MICROTUNE_4042FI5:
@@ -369,8 +420,8 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
/* Wait until the PLL locks */
for (;;) {
if (time_after(jiffies,timeout))
- return;
- if (1 != (rc = i2c_master_recv(c,&status_byte,1))) {
+ return 0;
+ if (1 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props,&status_byte,1))) {
tuner_warn("i2c i/o read error: rc == %d (should be 1)\n",rc);
break;
}
@@ -388,68 +439,86 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
buffer[0],buffer[1],buffer[2],buffer[3]);
- if (4 != (rc = i2c_master_send(c,buffer,4)))
+ if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,4)))
tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc);
break;
}
}
+ return 0;
}
-static void default_set_radio_freq(struct i2c_client *c, unsigned int freq)
+static int simple_set_radio_freq(struct dvb_frontend *fe,
+ struct analog_parameters *params)
{
struct tunertype *tun;
- struct tuner *t = i2c_get_clientdata(c);
+ struct tuner_simple_priv *priv = fe->tuner_priv;
u8 buffer[4];
u16 div;
int rc, j;
- enum param_type desired_type = TUNER_PARAM_TYPE_RADIO;
- struct tuner_params *params;
+ struct tuner_params *t_params;
+ unsigned int freq = params->frequency;
- tun = &tuners[t->type];
+ tun = priv->tun;
- for (j = 0; j < tun->count-1; j++) {
- if (desired_type != tun->params[j].type)
- continue;
+ for (j = tun->count-1; j > 0; j--)
+ if (tun->params[j].type == TUNER_PARAM_TYPE_RADIO)
+ break;
+ /* default t_params (j=0) will be used if desired type wasn't found */
+ t_params = &tun->params[j];
+
+ /* Select Radio 1st IF used */
+ switch (t_params->radio_if) {
+ case 0: /* 10.7 MHz */
+ freq += (unsigned int)(10.7*16000);
+ break;
+ case 1: /* 33.3 MHz */
+ freq += (unsigned int)(33.3*16000);
break;
+ case 2: /* 41.3 MHz */
+ freq += (unsigned int)(41.3*16000);
+ break;
+ default:
+ tuner_warn("Unsupported radio_if value %d\n", t_params->radio_if);
+ return 0;
}
- /* use default tuner_params if desired_type not available */
- if (desired_type != tun->params[j].type)
- j = 0;
-
- div = (20 * freq / 16000) + (int)(20*10.7); /* IF 10.7 MHz */
- params = &tun->params[j];
- buffer[2] = (params->ranges[0].config & ~TUNER_RATIO_MASK) | TUNER_RATIO_SELECT_50; /* 50 kHz step */
- switch (t->type) {
+ /* Bandswitch byte */
+ switch (priv->type) {
case TUNER_TENA_9533_DI:
case TUNER_YMEC_TVF_5533MF:
- tuner_dbg ("This tuner doesn't have FM. Most cards has a TEA5767 for FM\n");
- return;
+ tuner_dbg("This tuner doesn't have FM. Most cards have a TEA5767 for FM\n");
+ return 0;
case TUNER_PHILIPS_FM1216ME_MK3:
case TUNER_PHILIPS_FM1236_MK3:
case TUNER_PHILIPS_FMD1216ME_MK3:
case TUNER_LG_NTSC_TAPE:
+ case TUNER_PHILIPS_FM1256_IH3:
buffer[3] = 0x19;
break;
case TUNER_TNF_5335MF:
buffer[3] = 0x11;
break;
- case TUNER_PHILIPS_FM1256_IH3:
- div = (20 * freq) / 16000 + (int)(33.3 * 20); /* IF 33.3 MHz */
- buffer[3] = 0x19;
- break;
case TUNER_LG_PAL_FM:
buffer[3] = 0xa5;
break;
- case TUNER_MICROTUNE_4049FM5:
- div = (20 * freq) / 16000 + (int)(33.3 * 20); /* IF 33.3 MHz */
- buffer[3] = 0xa4;
+ case TUNER_THOMSON_DTT761X:
+ buffer[3] = 0x39;
break;
+ case TUNER_MICROTUNE_4049FM5:
default:
buffer[3] = 0xa4;
break;
}
- if (params->cb_first_if_lower_freq && div < t->last_div) {
+
+ buffer[2] = (t_params->ranges[0].config & ~TUNER_RATIO_MASK) |
+ TUNER_RATIO_SELECT_50; /* 50 kHz step */
+
+ /* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps
+ freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) =
+ freq * (1/800) */
+ div = (freq + 400) / 800;
+
+ if (t_params->cb_first_if_lower_freq && div < priv->last_div) {
buffer[0] = buffer[2];
buffer[1] = buffer[3];
buffer[2] = (div>>8) & 0x7f;
@@ -461,46 +530,108 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq)
tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n",
buffer[0],buffer[1],buffer[2],buffer[3]);
- t->last_div = div;
+ priv->last_div = div;
- if (params->has_tda9887) {
+ if (t_params->has_tda9887) {
int config = 0;
- if (params->port1_active && !params->port1_fm_high_sensitivity)
+ if (t_params->port1_active && !t_params->port1_fm_high_sensitivity)
config |= TDA9887_PORT1_ACTIVE;
- if (params->port2_active && !params->port2_fm_high_sensitivity)
+ if (t_params->port2_active && !t_params->port2_fm_high_sensitivity)
config |= TDA9887_PORT2_ACTIVE;
- if (params->intercarrier_mode)
+ if (t_params->intercarrier_mode)
config |= TDA9887_INTERCARRIER;
-/* if (params->port1_set_for_fm_mono)
+/* if (t_params->port1_set_for_fm_mono)
config &= ~TDA9887_PORT1_ACTIVE;*/
- if (params->fm_gain_normal)
+ if (t_params->fm_gain_normal)
config |= TDA9887_GAIN_NORMAL;
- i2c_clients_command(c->adapter, TDA9887_SET_CONFIG, &config);
+ if (t_params->radio_if == 2)
+ config |= TDA9887_RIF_41_3;
+ i2c_clients_command(priv->i2c_props.adap, TDA9887_SET_CONFIG, &config);
}
- if (4 != (rc = i2c_master_send(c,buffer,4)))
+ if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,4)))
tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc);
+
+ return 0;
}
-static struct tuner_operations simple_tuner_ops = {
- .set_tv_freq = default_set_tv_freq,
- .set_radio_freq = default_set_radio_freq,
- .has_signal = tuner_signal,
- .is_stereo = tuner_stereo,
+static int simple_set_params(struct dvb_frontend *fe,
+ struct analog_parameters *params)
+{
+ struct tuner_simple_priv *priv = fe->tuner_priv;
+ int ret = -EINVAL;
+
+ switch (params->mode) {
+ case V4L2_TUNER_RADIO:
+ ret = simple_set_radio_freq(fe, params);
+ priv->frequency = params->frequency * 125 / 2;
+ break;
+ case V4L2_TUNER_ANALOG_TV:
+ case V4L2_TUNER_DIGITAL_TV:
+ ret = simple_set_tv_freq(fe, params);
+ priv->frequency = params->frequency * 62500;
+ break;
+ }
+
+ return ret;
+}
+
+
+static int simple_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+
+ return 0;
+}
+
+static int simple_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct tuner_simple_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static struct dvb_tuner_ops simple_tuner_ops = {
+ .set_analog_params = simple_set_params,
+ .release = simple_release,
+ .get_frequency = simple_get_frequency,
+ .get_status = simple_get_status,
+ .get_rf_strength = simple_get_rf_strength,
};
-int default_tuner_init(struct i2c_client *c)
+struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c_adap,
+ u8 i2c_addr,
+ struct simple_tuner_config *cfg)
{
- struct tuner *t = i2c_get_clientdata(c);
+ struct tuner_simple_priv *priv = NULL;
- tuner_info("type set to %d (%s)\n",
- t->type, tuners[t->type].name);
- strlcpy(c->name, tuners[t->type].name, sizeof(c->name));
+ priv = kzalloc(sizeof(struct tuner_simple_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+ fe->tuner_priv = priv;
- memcpy(&t->ops, &simple_tuner_ops, sizeof(struct tuner_operations));
+ priv->i2c_props.addr = i2c_addr;
+ priv->i2c_props.adap = i2c_adap;
+ priv->type = cfg->type;
+ priv->tun = cfg->tun;
- return 0;
+ memcpy(&fe->ops.tuner_ops, &simple_tuner_ops, sizeof(struct dvb_tuner_ops));
+
+ tuner_info("type set to %d (%s)\n", cfg->type, cfg->tun->name);
+
+ strlcpy(fe->ops.tuner_ops.info.name, cfg->tun->name, sizeof(fe->ops.tuner_ops.info.name));
+
+ return fe;
}
+
+EXPORT_SYMBOL_GPL(simple_tuner_attach);
+
+MODULE_DESCRIPTION("Simple 4-control-bytes style tuner driver");
+MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer");
+MODULE_LICENSE("GPL");
+
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* ---------------------------------------------------------------------------
diff --git a/drivers/media/video/tuner-simple.h b/drivers/media/video/tuner-simple.h
new file mode 100644
index 00000000000..9089939a8c0
--- /dev/null
+++ b/drivers/media/video/tuner-simple.h
@@ -0,0 +1,46 @@
+/*
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __TUNER_SIMPLE_H__
+#define __TUNER_SIMPLE_H__
+
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+
+struct simple_tuner_config
+{
+ /* chip type */
+ unsigned int type;
+ struct tunertype *tun;
+};
+
+#if defined(CONFIG_TUNER_SIMPLE) || (defined(CONFIG_TUNER_SIMPLE_MODULE) && defined(MODULE))
+extern struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c_adap,
+ u8 i2c_addr,
+ struct simple_tuner_config *cfg);
+#else
+static inline struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c_adap,
+ u8 i2c_addr,
+ struct simple_tuner_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif
+
+#endif /* __TUNER_SIMPLE_H__ */
diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c
index 417f642b435..c6a7934bd5a 100644
--- a/drivers/media/video/tuner-types.c
+++ b/drivers/media/video/tuner-types.c
@@ -652,6 +652,7 @@ static struct tuner_params tuner_microtune_4049_fm5_params[] = {
.port1_invert_for_secam_lc = 1,
.default_pll_gating_18 = 1,
.fm_gain_normal=1,
+ .radio_if = 1, /* 33.3 MHz */
},
};
@@ -670,6 +671,9 @@ static struct tuner_params tuner_panasonic_vp27_params[] = {
.count = ARRAY_SIZE(tuner_panasonic_vp27_ntsc_ranges),
.has_tda9887 = 1,
.intercarrier_mode = 1,
+ .default_top_low = -3,
+ .default_top_mid = -3,
+ .default_top_high = -3,
},
};
@@ -730,6 +734,7 @@ static struct tuner_params tuner_philips_fm1256_ih3_params[] = {
.type = TUNER_PARAM_TYPE_PAL,
.ranges = tuner_fm1236_mk3_ntsc_ranges,
.count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges),
+ .radio_if = 1, /* 33.3 MHz */
},
};
@@ -856,6 +861,9 @@ static struct tuner_params tuner_thomson_dtt761x_params[] = {
.type = TUNER_PARAM_TYPE_NTSC,
.ranges = tuner_thomson_dtt761x_ntsc_ranges,
.count = ARRAY_SIZE(tuner_thomson_dtt761x_ntsc_ranges),
+ .has_tda9887 = 1,
+ .fm_gain_normal = 1,
+ .radio_if = 2, /* 41.3 MHz */
},
};
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index cffb011590e..a19cdcc17ef 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -15,7 +15,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index fdc3def437b..4b2c4034f5b 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -30,7 +30,6 @@
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/drivers/media/video/tvmixer.c b/drivers/media/video/tvmixer.c
index 3ae5a9cd2e2..9fa5b702e07 100644
--- a/drivers/media/video/tvmixer.c
+++ b/drivers/media/video/tvmixer.c
@@ -2,7 +2,6 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/timer.h>
@@ -238,13 +237,10 @@ static const struct file_operations tvmixer_fops = {
static int tvmixer_adapters(struct i2c_adapter *adap)
{
- struct list_head *item;
struct i2c_client *client;
- list_for_each(item,&adap->clients) {
- client = list_entry(item, struct i2c_client, list);
+ list_for_each_entry(client, &adap->clients, list)
tvmixer_clients(client);
- }
return 0;
}
diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c
index 5b1e346df20..c7d5f9ed22d 100644
--- a/drivers/media/video/usbvision/usbvision-core.c
+++ b/drivers/media/video/usbvision/usbvision-core.c
@@ -45,7 +45,6 @@
#include <media/tuner.h>
#include <media/audiochip.h>
-#include <linux/moduleparam.h>
#include <linux/workqueue.h>
#ifdef CONFIG_KMOD
diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c
index 025be555194..c66aef63916 100644
--- a/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/drivers/media/video/usbvision/usbvision-i2c.c
@@ -134,8 +134,6 @@ static inline int usb_find_address(struct i2c_adapter *i2c_adap,
addr = (msg->addr << 1);
if (flags & I2C_M_RD)
addr |= 1;
- if (flags & I2C_M_REV_DIR_ADDR)
- addr ^= 1;
add[0] = addr;
if (flags & I2C_M_RD)
@@ -192,7 +190,7 @@ static int algo_control(struct i2c_adapter *adapter, unsigned int cmd, unsigned
static u32 functionality(struct i2c_adapter *adap)
{
- return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
+ return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
}
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 0cb006f2943..e2f3c01cfa1 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -68,7 +68,6 @@
#include <media/tuner.h>
#include <media/audiochip.h>
-#include <linux/moduleparam.h>
#include <linux/workqueue.h>
#ifdef CONFIG_KMOD
@@ -183,20 +182,22 @@ MODULE_ALIAS(DRIVER_ALIAS);
#define YES_NO(x) ((x) ? "Yes" : "No")
-static inline struct usb_usbvision *cd_to_usbvision(struct class_device *cd)
+static inline struct usb_usbvision *cd_to_usbvision(struct device *cd)
{
struct video_device *vdev =
container_of(cd, struct video_device, class_dev);
return video_get_drvdata(vdev);
}
-static ssize_t show_version(struct class_device *cd, char *buf)
+static ssize_t show_version(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%s\n", USBVISION_VERSION_STRING);
}
-static CLASS_DEVICE_ATTR(version, S_IRUGO, show_version, NULL);
+static DEVICE_ATTR(version, S_IRUGO, show_version, NULL);
-static ssize_t show_model(struct class_device *cd, char *buf)
+static ssize_t show_model(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct video_device *vdev =
container_of(cd, struct video_device, class_dev);
@@ -204,9 +205,10 @@ static ssize_t show_model(struct class_device *cd, char *buf)
return sprintf(buf, "%s\n",
usbvision_device_data[usbvision->DevModel].ModelString);
}
-static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
+static DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
-static ssize_t show_hue(struct class_device *cd, char *buf)
+static ssize_t show_hue(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct video_device *vdev =
container_of(cd, struct video_device, class_dev);
@@ -218,9 +220,10 @@ static ssize_t show_hue(struct class_device *cd, char *buf)
call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
return sprintf(buf, "%d\n", ctrl.value);
}
-static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
+static DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
-static ssize_t show_contrast(struct class_device *cd, char *buf)
+static ssize_t show_contrast(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct video_device *vdev =
container_of(cd, struct video_device, class_dev);
@@ -232,9 +235,10 @@ static ssize_t show_contrast(struct class_device *cd, char *buf)
call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
return sprintf(buf, "%d\n", ctrl.value);
}
-static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
+static DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
-static ssize_t show_brightness(struct class_device *cd, char *buf)
+static ssize_t show_brightness(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct video_device *vdev =
container_of(cd, struct video_device, class_dev);
@@ -246,9 +250,10 @@ static ssize_t show_brightness(struct class_device *cd, char *buf)
call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
return sprintf(buf, "%d\n", ctrl.value);
}
-static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
+static DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
-static ssize_t show_saturation(struct class_device *cd, char *buf)
+static ssize_t show_saturation(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct video_device *vdev =
container_of(cd, struct video_device, class_dev);
@@ -260,9 +265,10 @@ static ssize_t show_saturation(struct class_device *cd, char *buf)
call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
return sprintf(buf, "%d\n", ctrl.value);
}
-static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
+static DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
-static ssize_t show_streaming(struct class_device *cd, char *buf)
+static ssize_t show_streaming(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct video_device *vdev =
container_of(cd, struct video_device, class_dev);
@@ -270,9 +276,10 @@ static ssize_t show_streaming(struct class_device *cd, char *buf)
return sprintf(buf, "%s\n",
YES_NO(usbvision->streaming==Stream_On?1:0));
}
-static CLASS_DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL);
+static DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL);
-static ssize_t show_compression(struct class_device *cd, char *buf)
+static ssize_t show_compression(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct video_device *vdev =
container_of(cd, struct video_device, class_dev);
@@ -280,16 +287,17 @@ static ssize_t show_compression(struct class_device *cd, char *buf)
return sprintf(buf, "%s\n",
YES_NO(usbvision->isocMode==ISOC_MODE_COMPRESS));
}
-static CLASS_DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL);
+static DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL);
-static ssize_t show_device_bridge(struct class_device *cd, char *buf)
+static ssize_t show_device_bridge(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct video_device *vdev =
container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%d\n", usbvision->bridgeType);
}
-static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL);
+static DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL);
static void usbvision_create_sysfs(struct video_device *vdev)
{
@@ -297,40 +305,40 @@ static void usbvision_create_sysfs(struct video_device *vdev)
if (!vdev)
return;
do {
- res=class_device_create_file(&vdev->class_dev,
- &class_device_attr_version);
+ res = device_create_file(&vdev->class_dev,
+ &dev_attr_version);
if (res<0)
break;
- res=class_device_create_file(&vdev->class_dev,
- &class_device_attr_model);
+ res = device_create_file(&vdev->class_dev,
+ &dev_attr_model);
if (res<0)
break;
- res=class_device_create_file(&vdev->class_dev,
- &class_device_attr_hue);
+ res = device_create_file(&vdev->class_dev,
+ &dev_attr_hue);
if (res<0)
break;
- res=class_device_create_file(&vdev->class_dev,
- &class_device_attr_contrast);
+ res = device_create_file(&vdev->class_dev,
+ &dev_attr_contrast);
if (res<0)
break;
- res=class_device_create_file(&vdev->class_dev,
- &class_device_attr_brightness);
+ res = device_create_file(&vdev->class_dev,
+ &dev_attr_brightness);
if (res<0)
break;
- res=class_device_create_file(&vdev->class_dev,
- &class_device_attr_saturation);
+ res = device_create_file(&vdev->class_dev,
+ &dev_attr_saturation);
if (res<0)
break;
- res=class_device_create_file(&vdev->class_dev,
- &class_device_attr_streaming);
+ res = device_create_file(&vdev->class_dev,
+ &dev_attr_streaming);
if (res<0)
break;
- res=class_device_create_file(&vdev->class_dev,
- &class_device_attr_compression);
+ res = device_create_file(&vdev->class_dev,
+ &dev_attr_compression);
if (res<0)
break;
- res=class_device_create_file(&vdev->class_dev,
- &class_device_attr_bridge);
+ res = device_create_file(&vdev->class_dev,
+ &dev_attr_bridge);
if (res>=0)
return;
} while (0);
@@ -341,24 +349,24 @@ static void usbvision_create_sysfs(struct video_device *vdev)
static void usbvision_remove_sysfs(struct video_device *vdev)
{
if (vdev) {
- class_device_remove_file(&vdev->class_dev,
- &class_device_attr_version);
- class_device_remove_file(&vdev->class_dev,
- &class_device_attr_model);
- class_device_remove_file(&vdev->class_dev,
- &class_device_attr_hue);
- class_device_remove_file(&vdev->class_dev,
- &class_device_attr_contrast);
- class_device_remove_file(&vdev->class_dev,
- &class_device_attr_brightness);
- class_device_remove_file(&vdev->class_dev,
- &class_device_attr_saturation);
- class_device_remove_file(&vdev->class_dev,
- &class_device_attr_streaming);
- class_device_remove_file(&vdev->class_dev,
- &class_device_attr_compression);
- class_device_remove_file(&vdev->class_dev,
- &class_device_attr_bridge);
+ device_remove_file(&vdev->class_dev,
+ &dev_attr_version);
+ device_remove_file(&vdev->class_dev,
+ &dev_attr_model);
+ device_remove_file(&vdev->class_dev,
+ &dev_attr_hue);
+ device_remove_file(&vdev->class_dev,
+ &dev_attr_contrast);
+ device_remove_file(&vdev->class_dev,
+ &dev_attr_brightness);
+ device_remove_file(&vdev->class_dev,
+ &dev_attr_saturation);
+ device_remove_file(&vdev->class_dev,
+ &dev_attr_streaming);
+ device_remove_file(&vdev->class_dev,
+ &dev_attr_compression);
+ device_remove_file(&vdev->class_dev,
+ &dev_attr_bridge);
}
}
diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c
index ede8543818b..9eac65f34bf 100644
--- a/drivers/media/video/v4l1-compat.c
+++ b/drivers/media/video/v4l1-compat.c
@@ -19,7 +19,6 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index d2915d3530e..c3440b280d2 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -65,11 +65,6 @@
#include <linux/kmod.h>
#endif
-#if defined(CONFIG_UST) || defined(CONFIG_UST_MODULE)
-#include <linux/ust.h>
-#endif
-
-
#include <linux/videodev.h>
MODULE_AUTHOR("Bill Dirks, Justin Schoeman, Gerd Knorr");
@@ -716,6 +711,7 @@ int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 ste
case V4L2_CID_AUDIO_MUTE:
case V4L2_CID_AUDIO_LOUDNESS:
case V4L2_CID_MPEG_AUDIO_MUTE:
+ case V4L2_CID_MPEG_VIDEO_MUTE:
case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
case V4L2_CID_MPEG_VIDEO_PULLDOWN:
qctrl->type = V4L2_CTRL_TYPE_BOOLEAN;
diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/video/v4l2-int-device.c
new file mode 100644
index 00000000000..8b4ef530a3a
--- /dev/null
+++ b/drivers/media/video/v4l2-int-device.c
@@ -0,0 +1,158 @@
+/*
+ * drivers/media/video/v4l2-int-device.c
+ *
+ * V4L2 internal ioctl interface.
+ *
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * Contact: Sakari Ailus <sakari.ailus@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/sort.h>
+#include <linux/string.h>
+
+#include <media/v4l2-int-device.h>
+
+static DEFINE_MUTEX(mutex);
+static LIST_HEAD(int_list);
+
+static void v4l2_int_device_try_attach_all(void)
+{
+ struct v4l2_int_device *m, *s;
+
+ list_for_each_entry(m, &int_list, head) {
+ if (m->type != v4l2_int_type_master)
+ continue;
+
+ list_for_each_entry(s, &int_list, head) {
+ if (s->type != v4l2_int_type_slave)
+ continue;
+
+ /* Slave is connected? */
+ if (s->u.slave->master)
+ continue;
+
+ /* Slave wants to attach to master? */
+ if (s->u.slave->attach_to[0] != 0
+ && strncmp(m->name, s->u.slave->attach_to,
+ V4L2NAMESIZE))
+ continue;
+
+ if (!try_module_get(m->module))
+ continue;
+
+ if (m->u.master->attach(m, s)) {
+ module_put(m->module);
+ continue;
+ }
+
+ s->u.slave->master = m;
+ }
+ }
+}
+
+static int ioctl_sort_cmp(const void *a, const void *b)
+{
+ const struct v4l2_int_ioctl_desc *d1 = a, *d2 = b;
+
+ if (d1->num > d2->num)
+ return 1;
+
+ if (d1->num < d2->num)
+ return -1;
+
+ return 0;
+}
+
+int v4l2_int_device_register(struct v4l2_int_device *d)
+{
+ if (d->type == v4l2_int_type_slave)
+ sort(d->u.slave->ioctls, d->u.slave->num_ioctls,
+ sizeof(struct v4l2_int_ioctl_desc),
+ &ioctl_sort_cmp, NULL);
+ mutex_lock(&mutex);
+ list_add(&d->head, &int_list);
+ v4l2_int_device_try_attach_all();
+ mutex_unlock(&mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(v4l2_int_device_register);
+
+void v4l2_int_device_unregister(struct v4l2_int_device *d)
+{
+ mutex_lock(&mutex);
+ list_del(&d->head);
+ if (d->type == v4l2_int_type_slave
+ && d->u.slave->master != NULL) {
+ d->u.slave->master->u.master->detach(d);
+ module_put(d->u.slave->master->module);
+ d->u.slave->master = NULL;
+ }
+ mutex_unlock(&mutex);
+}
+EXPORT_SYMBOL_GPL(v4l2_int_device_unregister);
+
+/* Adapted from search_extable in extable.c. */
+static v4l2_int_ioctl_func *find_ioctl(struct v4l2_int_slave *slave, int cmd,
+ v4l2_int_ioctl_func *no_such_ioctl)
+{
+ const struct v4l2_int_ioctl_desc *first = slave->ioctls;
+ const struct v4l2_int_ioctl_desc *last =
+ first + slave->num_ioctls - 1;
+
+ while (first <= last) {
+ const struct v4l2_int_ioctl_desc *mid;
+
+ mid = (last - first) / 2 + first;
+
+ if (mid->num < cmd)
+ first = mid + 1;
+ else if (mid->num > cmd)
+ last = mid - 1;
+ else
+ return mid->func;
+ }
+
+ return no_such_ioctl;
+}
+
+static int no_such_ioctl_0(struct v4l2_int_device *d)
+{
+ return -ENOIOCTLCMD;
+}
+
+int v4l2_int_ioctl_0(struct v4l2_int_device *d, int cmd)
+{
+ return ((v4l2_int_ioctl_func_0 *)
+ find_ioctl(d->u.slave, cmd,
+ (v4l2_int_ioctl_func *)no_such_ioctl_0))(d);
+}
+
+static int no_such_ioctl_1(struct v4l2_int_device *d, void *arg)
+{
+ return -ENOIOCTLCMD;
+}
+
+int v4l2_int_ioctl_1(struct v4l2_int_device *d, int cmd, void *arg)
+{
+ return ((v4l2_int_ioctl_func_1 *)
+ find_ioctl(d->u.slave, cmd,
+ (v4l2_int_ioctl_func *)no_such_ioctl_1))(d, arg);
+}
diff --git a/drivers/media/video/video-buf-dvb.c b/drivers/media/video/video-buf-dvb.c
deleted file mode 100644
index e617925ba31..00000000000
--- a/drivers/media/video/video-buf-dvb.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- *
- * some helper function for simple DVB cards which simply DMA the
- * complete transport stream and let the computer sort everything else
- * (i.e. we are using the software demux, ...). Also uses the
- * video-buf to manage DMA buffers.
- *
- * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SUSE Labs]
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/kthread.h>
-#include <linux/file.h>
-#include <linux/freezer.h>
-
-#include <media/video-buf.h>
-#include <media/video-buf-dvb.h>
-
-/* ------------------------------------------------------------------ */
-
-MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
-MODULE_LICENSE("GPL");
-
-static unsigned int debug = 0;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug,"enable debug messages");
-
-#define dprintk(fmt, arg...) if (debug) \
- printk(KERN_DEBUG "%s/dvb: " fmt, dvb->name , ## arg)
-
-/* ------------------------------------------------------------------ */
-
-static int videobuf_dvb_thread(void *data)
-{
- struct videobuf_dvb *dvb = data;
- struct videobuf_buffer *buf;
- unsigned long flags;
- int err;
-
- dprintk("dvb thread started\n");
- set_freezable();
- videobuf_read_start(&dvb->dvbq);
-
- for (;;) {
- /* fetch next buffer */
- buf = list_entry(dvb->dvbq.stream.next,
- struct videobuf_buffer, stream);
- list_del(&buf->stream);
- err = videobuf_waiton(buf,0,1);
- BUG_ON(0 != err);
-
- /* no more feeds left or stop_feed() asked us to quit */
- if (0 == dvb->nfeeds)
- break;
- if (kthread_should_stop())
- break;
- try_to_freeze();
-
- /* feed buffer data to demux */
- if (buf->state == STATE_DONE)
- dvb_dmx_swfilter(&dvb->demux, buf->dma.vmalloc,
- buf->size);
-
- /* requeue buffer */
- list_add_tail(&buf->stream,&dvb->dvbq.stream);
- spin_lock_irqsave(dvb->dvbq.irqlock,flags);
- dvb->dvbq.ops->buf_queue(&dvb->dvbq,buf);
- spin_unlock_irqrestore(dvb->dvbq.irqlock,flags);
- }
-
- videobuf_read_stop(&dvb->dvbq);
- dprintk("dvb thread stopped\n");
-
- /* Hmm, linux becomes *very* unhappy without this ... */
- while (!kthread_should_stop()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- }
- return 0;
-}
-
-static int videobuf_dvb_start_feed(struct dvb_demux_feed *feed)
-{
- struct dvb_demux *demux = feed->demux;
- struct videobuf_dvb *dvb = demux->priv;
- int rc;
-
- if (!demux->dmx.frontend)
- return -EINVAL;
-
- mutex_lock(&dvb->lock);
- dvb->nfeeds++;
- rc = dvb->nfeeds;
-
- if (NULL != dvb->thread)
- goto out;
- dvb->thread = kthread_run(videobuf_dvb_thread,
- dvb, "%s dvb", dvb->name);
- if (IS_ERR(dvb->thread)) {
- rc = PTR_ERR(dvb->thread);
- dvb->thread = NULL;
- }
-
-out:
- mutex_unlock(&dvb->lock);
- return rc;
-}
-
-static int videobuf_dvb_stop_feed(struct dvb_demux_feed *feed)
-{
- struct dvb_demux *demux = feed->demux;
- struct videobuf_dvb *dvb = demux->priv;
- int err = 0;
-
- mutex_lock(&dvb->lock);
- dvb->nfeeds--;
- if (0 == dvb->nfeeds && NULL != dvb->thread) {
- // FIXME: cx8802_cancel_buffers(dev);
- err = kthread_stop(dvb->thread);
- dvb->thread = NULL;
- }
- mutex_unlock(&dvb->lock);
- return err;
-}
-
-/* ------------------------------------------------------------------ */
-
-int videobuf_dvb_register(struct videobuf_dvb *dvb,
- struct module *module,
- void *adapter_priv,
- struct device *device)
-{
- int result;
-
- mutex_init(&dvb->lock);
-
- /* register adapter */
- result = dvb_register_adapter(&dvb->adapter, dvb->name, module, device);
- if (result < 0) {
- printk(KERN_WARNING "%s: dvb_register_adapter failed (errno = %d)\n",
- dvb->name, result);
- goto fail_adapter;
- }
- dvb->adapter.priv = adapter_priv;
-
- /* register frontend */
- result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
- if (result < 0) {
- printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n",
- dvb->name, result);
- goto fail_frontend;
- }
-
- /* register demux stuff */
- dvb->demux.dmx.capabilities =
- DMX_TS_FILTERING | DMX_SECTION_FILTERING |
- DMX_MEMORY_BASED_FILTERING;
- dvb->demux.priv = dvb;
- dvb->demux.filternum = 256;
- dvb->demux.feednum = 256;
- dvb->demux.start_feed = videobuf_dvb_start_feed;
- dvb->demux.stop_feed = videobuf_dvb_stop_feed;
- result = dvb_dmx_init(&dvb->demux);
- if (result < 0) {
- printk(KERN_WARNING "%s: dvb_dmx_init failed (errno = %d)\n",
- dvb->name, result);
- goto fail_dmx;
- }
-
- dvb->dmxdev.filternum = 256;
- dvb->dmxdev.demux = &dvb->demux.dmx;
- dvb->dmxdev.capabilities = 0;
- result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
- if (result < 0) {
- printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n",
- dvb->name, result);
- goto fail_dmxdev;
- }
-
- dvb->fe_hw.source = DMX_FRONTEND_0;
- result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
- if (result < 0) {
- printk(KERN_WARNING "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
- dvb->name, result);
- goto fail_fe_hw;
- }
-
- dvb->fe_mem.source = DMX_MEMORY_FE;
- result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
- if (result < 0) {
- printk(KERN_WARNING "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
- dvb->name, result);
- goto fail_fe_mem;
- }
-
- result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
- if (result < 0) {
- printk(KERN_WARNING "%s: connect_frontend failed (errno = %d)\n",
- dvb->name, result);
- goto fail_fe_conn;
- }
-
- /* register network adapter */
- dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
- return 0;
-
-fail_fe_conn:
- dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
-fail_fe_mem:
- dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
-fail_fe_hw:
- dvb_dmxdev_release(&dvb->dmxdev);
-fail_dmxdev:
- dvb_dmx_release(&dvb->demux);
-fail_dmx:
- dvb_unregister_frontend(dvb->frontend);
-fail_frontend:
- dvb_frontend_detach(dvb->frontend);
- dvb_unregister_adapter(&dvb->adapter);
-fail_adapter:
- return result;
-}
-
-void videobuf_dvb_unregister(struct videobuf_dvb *dvb)
-{
- dvb_net_release(&dvb->net);
- dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
- dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
- dvb_dmxdev_release(&dvb->dmxdev);
- dvb_dmx_release(&dvb->demux);
- dvb_unregister_frontend(dvb->frontend);
- dvb_frontend_detach(dvb->frontend);
- dvb_unregister_adapter(&dvb->adapter);
-}
-
-EXPORT_SYMBOL(videobuf_dvb_register);
-EXPORT_SYMBOL(videobuf_dvb_unregister);
-
-/* ------------------------------------------------------------------ */
-/*
- * Local variables:
- * c-basic-offset: 8
- * compile-command: "make DVB=1"
- * End:
- */
-
diff --git a/drivers/media/video/video-buf.c b/drivers/media/video/video-buf.c
deleted file mode 100644
index a32dfbe0585..00000000000
--- a/drivers/media/video/video-buf.c
+++ /dev/null
@@ -1,1425 +0,0 @@
-/*
- *
- * generic helper functions for video4linux capture buffers, to handle
- * memory management and PCI DMA.
- * Right now, bttv, saa7134, saa7146 and cx88 use it.
- *
- * The functions expect the hardware being able to scatter gatter
- * (i.e. the buffers are not linear in physical memory, but fragmented
- * into PAGE_SIZE chunks). They also assume the driver does not need
- * to touch the video data.
- *
- * device specific map/unmap/sync stuff now are mapped as operations
- * to allow its usage by USB and virtual devices.
- *
- * (c) 2001-2004 Gerd Knorr <kraxel@bytesex.org> [SUSE Labs]
- * (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
- * (c) 2006 Ted Walther and John Sokol
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-
-#include <media/video-buf.h>
-
-#define MAGIC_DMABUF 0x19721112
-#define MAGIC_BUFFER 0x20040302
-#define MAGIC_CHECK(is,should) if (unlikely((is) != (should))) \
- { printk(KERN_ERR "magic mismatch: %x (expected %x)\n",is,should); BUG(); }
-
-static int debug = 0;
-module_param(debug, int, 0644);
-
-MODULE_DESCRIPTION("helper module to manage video4linux pci dma buffers");
-MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
-MODULE_LICENSE("GPL");
-
-#define dprintk(level, fmt, arg...) if (debug >= level) \
- printk(KERN_DEBUG "vbuf: " fmt , ## arg)
-
-struct scatterlist*
-videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages)
-{
- struct scatterlist *sglist;
- struct page *pg;
- int i;
-
- sglist = kcalloc(nr_pages, sizeof(struct scatterlist), GFP_KERNEL);
- if (NULL == sglist)
- return NULL;
- for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) {
- pg = vmalloc_to_page(virt);
- if (NULL == pg)
- goto err;
- BUG_ON(PageHighMem(pg));
- sglist[i].page = pg;
- sglist[i].length = PAGE_SIZE;
- }
- return sglist;
-
- err:
- kfree(sglist);
- return NULL;
-}
-
-struct scatterlist*
-videobuf_pages_to_sg(struct page **pages, int nr_pages, int offset)
-{
- struct scatterlist *sglist;
- int i = 0;
-
- if (NULL == pages[0])
- return NULL;
- sglist = kcalloc(nr_pages, sizeof(*sglist), GFP_KERNEL);
- if (NULL == sglist)
- return NULL;
-
- if (NULL == pages[0])
- goto nopage;
- if (PageHighMem(pages[0]))
- /* DMA to highmem pages might not work */
- goto highmem;
- sglist[0].page = pages[0];
- sglist[0].offset = offset;
- sglist[0].length = PAGE_SIZE - offset;
- for (i = 1; i < nr_pages; i++) {
- if (NULL == pages[i])
- goto nopage;
- if (PageHighMem(pages[i]))
- goto highmem;
- sglist[i].page = pages[i];
- sglist[i].length = PAGE_SIZE;
- }
- return sglist;
-
- nopage:
- dprintk(2,"sgl: oops - no page\n");
- kfree(sglist);
- return NULL;
-
- highmem:
- dprintk(2,"sgl: oops - highmem page\n");
- kfree(sglist);
- return NULL;
-}
-
-/* --------------------------------------------------------------------- */
-
-void videobuf_dma_init(struct videobuf_dmabuf *dma)
-{
- memset(dma,0,sizeof(*dma));
- dma->magic = MAGIC_DMABUF;
-}
-
-int videobuf_dma_init_user(struct videobuf_dmabuf *dma, int direction,
- unsigned long data, unsigned long size)
-{
- unsigned long first,last;
- int err, rw = 0;
-
- dma->direction = direction;
- switch (dma->direction) {
- case PCI_DMA_FROMDEVICE: rw = READ; break;
- case PCI_DMA_TODEVICE: rw = WRITE; break;
- default: BUG();
- }
-
- first = (data & PAGE_MASK) >> PAGE_SHIFT;
- last = ((data+size-1) & PAGE_MASK) >> PAGE_SHIFT;
- dma->offset = data & ~PAGE_MASK;
- dma->nr_pages = last-first+1;
- dma->pages = kmalloc(dma->nr_pages * sizeof(struct page*),
- GFP_KERNEL);
- if (NULL == dma->pages)
- return -ENOMEM;
- dprintk(1,"init user [0x%lx+0x%lx => %d pages]\n",
- data,size,dma->nr_pages);
-
- dma->varea = (void *) data;
-
- down_read(&current->mm->mmap_sem);
- err = get_user_pages(current,current->mm,
- data & PAGE_MASK, dma->nr_pages,
- rw == READ, 1, /* force */
- dma->pages, NULL);
- up_read(&current->mm->mmap_sem);
- if (err != dma->nr_pages) {
- dma->nr_pages = (err >= 0) ? err : 0;
- dprintk(1,"get_user_pages: err=%d [%d]\n",err,dma->nr_pages);
- return err < 0 ? err : -EINVAL;
- }
- return 0;
-}
-
-int videobuf_dma_init_kernel(struct videobuf_dmabuf *dma, int direction,
- int nr_pages)
-{
- dprintk(1,"init kernel [%d pages]\n",nr_pages);
- dma->direction = direction;
- dma->vmalloc = vmalloc_32(nr_pages << PAGE_SHIFT);
- if (NULL == dma->vmalloc) {
- dprintk(1,"vmalloc_32(%d pages) failed\n",nr_pages);
- return -ENOMEM;
- }
- dprintk(1,"vmalloc is at addr 0x%08lx, size=%d\n",
- (unsigned long)dma->vmalloc,
- nr_pages << PAGE_SHIFT);
- memset(dma->vmalloc,0,nr_pages << PAGE_SHIFT);
- dma->nr_pages = nr_pages;
- return 0;
-}
-
-int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction,
- dma_addr_t addr, int nr_pages)
-{
- dprintk(1,"init overlay [%d pages @ bus 0x%lx]\n",
- nr_pages,(unsigned long)addr);
- dma->direction = direction;
- if (0 == addr)
- return -EINVAL;
-
- dma->bus_addr = addr;
- dma->nr_pages = nr_pages;
- return 0;
-}
-
-int videobuf_dma_map(struct videobuf_queue* q,struct videobuf_dmabuf *dma)
-{
- void *dev=q->dev;
-
- MAGIC_CHECK(dma->magic,MAGIC_DMABUF);
- BUG_ON(0 == dma->nr_pages);
-
- if (dma->pages) {
- dma->sglist = videobuf_pages_to_sg(dma->pages, dma->nr_pages,
- dma->offset);
- }
- if (dma->vmalloc) {
- dma->sglist = videobuf_vmalloc_to_sg
- (dma->vmalloc,dma->nr_pages);
- }
- if (dma->bus_addr) {
- dma->sglist = kmalloc(sizeof(struct scatterlist), GFP_KERNEL);
- if (NULL != dma->sglist) {
- dma->sglen = 1;
- sg_dma_address(&dma->sglist[0]) = dma->bus_addr & PAGE_MASK;
- dma->sglist[0].offset = dma->bus_addr & ~PAGE_MASK;
- sg_dma_len(&dma->sglist[0]) = dma->nr_pages * PAGE_SIZE;
- }
- }
- if (NULL == dma->sglist) {
- dprintk(1,"scatterlist is NULL\n");
- return -ENOMEM;
- }
- if (!dma->bus_addr) {
- if (q->ops->vb_map_sg) {
- dma->sglen = q->ops->vb_map_sg(dev,dma->sglist,
- dma->nr_pages, dma->direction);
- }
- if (0 == dma->sglen) {
- printk(KERN_WARNING
- "%s: videobuf_map_sg failed\n",__FUNCTION__);
- kfree(dma->sglist);
- dma->sglist = NULL;
- dma->sglen = 0;
- return -EIO;
- }
- }
- return 0;
-}
-
-int videobuf_dma_sync(struct videobuf_queue* q,struct videobuf_dmabuf *dma)
-{
- void *dev=q->dev;
-
- MAGIC_CHECK(dma->magic,MAGIC_DMABUF);
- BUG_ON(!dma->sglen);
-
- if (!dma->bus_addr && q->ops->vb_dma_sync_sg)
- q->ops->vb_dma_sync_sg(dev,dma->sglist,dma->nr_pages,
- dma->direction);
-
- return 0;
-}
-
-int videobuf_dma_unmap(struct videobuf_queue* q,struct videobuf_dmabuf *dma)
-{
- void *dev=q->dev;
-
- MAGIC_CHECK(dma->magic,MAGIC_DMABUF);
- if (!dma->sglen)
- return 0;
-
- if (!dma->bus_addr && q->ops->vb_unmap_sg)
- q->ops->vb_unmap_sg(dev,dma->sglist,dma->nr_pages,
- dma->direction);
- kfree(dma->sglist);
- dma->sglist = NULL;
- dma->sglen = 0;
- return 0;
-}
-
-int videobuf_dma_free(struct videobuf_dmabuf *dma)
-{
- MAGIC_CHECK(dma->magic,MAGIC_DMABUF);
- BUG_ON(dma->sglen);
-
- if (dma->pages) {
- int i;
- for (i=0; i < dma->nr_pages; i++)
- page_cache_release(dma->pages[i]);
- kfree(dma->pages);
- dma->pages = NULL;
- }
-
- vfree(dma->vmalloc);
- dma->vmalloc = NULL;
- dma->varea = NULL;
-
- if (dma->bus_addr) {
- dma->bus_addr = 0;
- }
- dma->direction = PCI_DMA_NONE;
- return 0;
-}
-
-/* --------------------------------------------------------------------- */
-
-void* videobuf_alloc(unsigned int size)
-{
- struct videobuf_buffer *vb;
-
- vb = kzalloc(size,GFP_KERNEL);
- if (NULL != vb) {
- videobuf_dma_init(&vb->dma);
- init_waitqueue_head(&vb->done);
- vb->magic = MAGIC_BUFFER;
- }
- return vb;
-}
-
-int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr)
-{
- int retval = 0;
- DECLARE_WAITQUEUE(wait, current);
-
- MAGIC_CHECK(vb->magic,MAGIC_BUFFER);
- add_wait_queue(&vb->done, &wait);
- while (vb->state == STATE_ACTIVE || vb->state == STATE_QUEUED) {
- if (non_blocking) {
- retval = -EAGAIN;
- break;
- }
- set_current_state(intr ? TASK_INTERRUPTIBLE
- : TASK_UNINTERRUPTIBLE);
- if (vb->state == STATE_ACTIVE || vb->state == STATE_QUEUED)
- schedule();
- set_current_state(TASK_RUNNING);
- if (intr && signal_pending(current)) {
- dprintk(1,"buffer waiton: -EINTR\n");
- retval = -EINTR;
- break;
- }
- }
- remove_wait_queue(&vb->done, &wait);
- return retval;
-}
-
-int
-videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,
- struct v4l2_framebuffer *fbuf)
-{
- int err,pages;
- dma_addr_t bus;
-
- MAGIC_CHECK(vb->magic,MAGIC_BUFFER);
- switch (vb->memory) {
- case V4L2_MEMORY_MMAP:
- case V4L2_MEMORY_USERPTR:
- if (0 == vb->baddr) {
- /* no userspace addr -- kernel bounce buffer */
- pages = PAGE_ALIGN(vb->size) >> PAGE_SHIFT;
- err = videobuf_dma_init_kernel(&vb->dma,PCI_DMA_FROMDEVICE,
- pages);
- if (0 != err)
- return err;
- } else {
- /* dma directly to userspace */
- err = videobuf_dma_init_user(&vb->dma,PCI_DMA_FROMDEVICE,
- vb->baddr,vb->bsize);
- if (0 != err)
- return err;
- }
- break;
- case V4L2_MEMORY_OVERLAY:
- if (NULL == fbuf)
- return -EINVAL;
- /* FIXME: need sanity checks for vb->boff */
- /*
- * Using a double cast to avoid compiler warnings when
- * building for PAE. Compiler doesn't like direct casting
- * of a 32 bit ptr to 64 bit integer.
- */
- bus = (dma_addr_t)(unsigned long)fbuf->base + vb->boff;
- pages = PAGE_ALIGN(vb->size) >> PAGE_SHIFT;
- err = videobuf_dma_init_overlay(&vb->dma,PCI_DMA_FROMDEVICE,
- bus, pages);
- if (0 != err)
- return err;
- break;
- default:
- BUG();
- }
- err = videobuf_dma_map(q,&vb->dma);
- if (0 != err)
- return err;
-
- return 0;
-}
-
-/* --------------------------------------------------------------------- */
-
-void videobuf_queue_pci(struct videobuf_queue* q)
-{
- /* If not specified, defaults to PCI map sg */
- if (!q->ops->vb_map_sg)
- q->ops->vb_map_sg=(vb_map_sg_t *)pci_map_sg;
-
- if (!q->ops->vb_dma_sync_sg)
- q->ops->vb_dma_sync_sg=(vb_map_sg_t *)pci_dma_sync_sg_for_cpu;
- if (!q->ops->vb_unmap_sg)
- q->ops->vb_unmap_sg=(vb_map_sg_t *)pci_unmap_sg;
-}
-
-int videobuf_pci_dma_map(struct pci_dev *pci,struct videobuf_dmabuf *dma)
-{
- struct videobuf_queue q;
- struct videobuf_queue_ops qops;
-
- q.dev=pci;
- qops.vb_map_sg=(vb_map_sg_t *)pci_map_sg;
- qops.vb_unmap_sg=(vb_map_sg_t *)pci_unmap_sg;
- q.ops = &qops;
-
- return (videobuf_dma_map(&q,dma));
-}
-
-int videobuf_pci_dma_unmap(struct pci_dev *pci,struct videobuf_dmabuf *dma)
-{
- struct videobuf_queue q;
- struct videobuf_queue_ops qops;
-
- q.dev=pci;
- qops.vb_map_sg=(vb_map_sg_t *)pci_map_sg;
- qops.vb_unmap_sg=(vb_map_sg_t *)pci_unmap_sg;
- q.ops = &qops;
-
- return (videobuf_dma_unmap(&q,dma));
-}
-
-void videobuf_queue_init(struct videobuf_queue* q,
- struct videobuf_queue_ops *ops,
- void *dev,
- spinlock_t *irqlock,
- enum v4l2_buf_type type,
- enum v4l2_field field,
- unsigned int msize,
- void *priv)
-{
- memset(q,0,sizeof(*q));
- q->irqlock = irqlock;
- q->dev = dev;
- q->type = type;
- q->field = field;
- q->msize = msize;
- q->ops = ops;
- q->priv_data = priv;
-
- videobuf_queue_pci(q);
-
- mutex_init(&q->lock);
- INIT_LIST_HEAD(&q->stream);
-}
-
-int
-videobuf_queue_is_busy(struct videobuf_queue *q)
-{
- int i;
-
- if (q->streaming) {
- dprintk(1,"busy: streaming active\n");
- return 1;
- }
- if (q->reading) {
- dprintk(1,"busy: pending read #1\n");
- return 1;
- }
- if (q->read_buf) {
- dprintk(1,"busy: pending read #2\n");
- return 1;
- }
- for (i = 0; i < VIDEO_MAX_FRAME; i++) {
- if (NULL == q->bufs[i])
- continue;
- if (q->bufs[i]->map) {
- dprintk(1,"busy: buffer #%d mapped\n",i);
- return 1;
- }
- if (q->bufs[i]->state == STATE_QUEUED) {
- dprintk(1,"busy: buffer #%d queued\n",i);
- return 1;
- }
- if (q->bufs[i]->state == STATE_ACTIVE) {
- dprintk(1,"busy: buffer #%d avtive\n",i);
- return 1;
- }
- }
- return 0;
-}
-
-void
-videobuf_queue_cancel(struct videobuf_queue *q)
-{
- unsigned long flags=0;
- int i;
-
- /* remove queued buffers from list */
- if (q->irqlock)
- spin_lock_irqsave(q->irqlock,flags);
- for (i = 0; i < VIDEO_MAX_FRAME; i++) {
- if (NULL == q->bufs[i])
- continue;
- if (q->bufs[i]->state == STATE_QUEUED) {
- list_del(&q->bufs[i]->queue);
- q->bufs[i]->state = STATE_ERROR;
- }
- }
- if (q->irqlock)
- spin_unlock_irqrestore(q->irqlock,flags);
-
- /* free all buffers + clear queue */
- for (i = 0; i < VIDEO_MAX_FRAME; i++) {
- if (NULL == q->bufs[i])
- continue;
- q->ops->buf_release(q,q->bufs[i]);
- }
- INIT_LIST_HEAD(&q->stream);
-}
-
-/* --------------------------------------------------------------------- */
-
-enum v4l2_field
-videobuf_next_field(struct videobuf_queue *q)
-{
- enum v4l2_field field = q->field;
-
- BUG_ON(V4L2_FIELD_ANY == field);
-
- if (V4L2_FIELD_ALTERNATE == field) {
- if (V4L2_FIELD_TOP == q->last) {
- field = V4L2_FIELD_BOTTOM;
- q->last = V4L2_FIELD_BOTTOM;
- } else {
- field = V4L2_FIELD_TOP;
- q->last = V4L2_FIELD_TOP;
- }
- }
- return field;
-}
-
-void
-videobuf_status(struct v4l2_buffer *b, struct videobuf_buffer *vb,
- enum v4l2_buf_type type)
-{
- MAGIC_CHECK(vb->magic,MAGIC_BUFFER);
-
- b->index = vb->i;
- b->type = type;
-
- b->memory = vb->memory;
- switch (b->memory) {
- case V4L2_MEMORY_MMAP:
- b->m.offset = vb->boff;
- b->length = vb->bsize;
- break;
- case V4L2_MEMORY_USERPTR:
- b->m.userptr = vb->baddr;
- b->length = vb->bsize;
- break;
- case V4L2_MEMORY_OVERLAY:
- b->m.offset = vb->boff;
- break;
- }
-
- b->flags = 0;
- if (vb->map)
- b->flags |= V4L2_BUF_FLAG_MAPPED;
-
- switch (vb->state) {
- case STATE_PREPARED:
- case STATE_QUEUED:
- case STATE_ACTIVE:
- b->flags |= V4L2_BUF_FLAG_QUEUED;
- break;
- case STATE_DONE:
- case STATE_ERROR:
- b->flags |= V4L2_BUF_FLAG_DONE;
- break;
- case STATE_NEEDS_INIT:
- case STATE_IDLE:
- /* nothing */
- break;
- }
-
- if (vb->input != UNSET) {
- b->flags |= V4L2_BUF_FLAG_INPUT;
- b->input = vb->input;
- }
-
- b->field = vb->field;
- b->timestamp = vb->ts;
- b->bytesused = vb->size;
- b->sequence = vb->field_count >> 1;
-}
-
-int
-videobuf_reqbufs(struct videobuf_queue *q,
- struct v4l2_requestbuffers *req)
-{
- unsigned int size,count;
- int retval;
-
- if (req->type != q->type) {
- dprintk(1,"reqbufs: queue type invalid\n");
- return -EINVAL;
- }
- if (req->count < 1) {
- dprintk(1,"reqbufs: count invalid (%d)\n",req->count);
- return -EINVAL;
- }
- if (req->memory != V4L2_MEMORY_MMAP &&
- req->memory != V4L2_MEMORY_USERPTR &&
- req->memory != V4L2_MEMORY_OVERLAY) {
- dprintk(1,"reqbufs: memory type invalid\n");
- return -EINVAL;
- }
-
- if (q->streaming) {
- dprintk(1,"reqbufs: streaming already exists\n");
- return -EBUSY;
- }
- if (!list_empty(&q->stream)) {
- dprintk(1,"reqbufs: stream running\n");
- return -EBUSY;
- }
-
- mutex_lock(&q->lock);
- count = req->count;
- if (count > VIDEO_MAX_FRAME)
- count = VIDEO_MAX_FRAME;
- size = 0;
- q->ops->buf_setup(q,&count,&size);
- size = PAGE_ALIGN(size);
- dprintk(1,"reqbufs: bufs=%d, size=0x%x [%d pages total]\n",
- count, size, (count*size)>>PAGE_SHIFT);
-
- retval = videobuf_mmap_setup(q,count,size,req->memory);
- if (retval < 0) {
- dprintk(1,"reqbufs: mmap setup returned %d\n",retval);
- goto done;
- }
-
- req->count = count;
-
- done:
- mutex_unlock(&q->lock);
- return retval;
-}
-
-int
-videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b)
-{
- if (unlikely(b->type != q->type)) {
- dprintk(1,"querybuf: Wrong type.\n");
- return -EINVAL;
- }
- if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME)) {
- dprintk(1,"querybuf: index out of range.\n");
- return -EINVAL;
- }
- if (unlikely(NULL == q->bufs[b->index])) {
- dprintk(1,"querybuf: buffer is null.\n");
- return -EINVAL;
- }
- videobuf_status(b,q->bufs[b->index],q->type);
- return 0;
-}
-
-int
-videobuf_qbuf(struct videobuf_queue *q,
- struct v4l2_buffer *b)
-{
- struct videobuf_buffer *buf;
- enum v4l2_field field;
- unsigned long flags=0;
- int retval;
-
- mutex_lock(&q->lock);
- retval = -EBUSY;
- if (q->reading) {
- dprintk(1,"qbuf: Reading running...\n");
- goto done;
- }
- retval = -EINVAL;
- if (b->type != q->type) {
- dprintk(1,"qbuf: Wrong type.\n");
- goto done;
- }
- if (b->index < 0 || b->index >= VIDEO_MAX_FRAME) {
- dprintk(1,"qbuf: index out of range.\n");
- goto done;
- }
- buf = q->bufs[b->index];
- if (NULL == buf) {
- dprintk(1,"qbuf: buffer is null.\n");
- goto done;
- }
- MAGIC_CHECK(buf->magic,MAGIC_BUFFER);
- if (buf->memory != b->memory) {
- dprintk(1,"qbuf: memory type is wrong.\n");
- goto done;
- }
- if (buf->state != STATE_NEEDS_INIT && buf->state != STATE_IDLE) {
- dprintk(1,"qbuf: buffer is already queued or active.\n");
- goto done;
- }
-
- if (b->flags & V4L2_BUF_FLAG_INPUT) {
- if (b->input >= q->inputs) {
- dprintk(1,"qbuf: wrong input.\n");
- goto done;
- }
- buf->input = b->input;
- } else {
- buf->input = UNSET;
- }
-
- switch (b->memory) {
- case V4L2_MEMORY_MMAP:
- if (0 == buf->baddr) {
- dprintk(1,"qbuf: mmap requested but buffer addr is zero!\n");
- goto done;
- }
- break;
- case V4L2_MEMORY_USERPTR:
- if (b->length < buf->bsize) {
- dprintk(1,"qbuf: buffer length is not enough\n");
- goto done;
- }
- if (STATE_NEEDS_INIT != buf->state && buf->baddr != b->m.userptr)
- q->ops->buf_release(q,buf);
- buf->baddr = b->m.userptr;
- break;
- case V4L2_MEMORY_OVERLAY:
- buf->boff = b->m.offset;
- break;
- default:
- dprintk(1,"qbuf: wrong memory type\n");
- goto done;
- }
-
- dprintk(1,"qbuf: requesting next field\n");
- field = videobuf_next_field(q);
- retval = q->ops->buf_prepare(q,buf,field);
- if (0 != retval) {
- dprintk(1,"qbuf: buffer_prepare returned %d\n",retval);
- goto done;
- }
-
- list_add_tail(&buf->stream,&q->stream);
- if (q->streaming) {
- if (q->irqlock)
- spin_lock_irqsave(q->irqlock,flags);
- q->ops->buf_queue(q,buf);
- if (q->irqlock)
- spin_unlock_irqrestore(q->irqlock,flags);
- }
- dprintk(1,"qbuf: succeded\n");
- retval = 0;
-
- done:
- mutex_unlock(&q->lock);
- return retval;
-}
-
-int
-videobuf_dqbuf(struct videobuf_queue *q,
- struct v4l2_buffer *b, int nonblocking)
-{
- struct videobuf_buffer *buf;
- int retval;
-
- mutex_lock(&q->lock);
- retval = -EBUSY;
- if (q->reading) {
- dprintk(1,"dqbuf: Reading running...\n");
- goto done;
- }
- retval = -EINVAL;
- if (b->type != q->type) {
- dprintk(1,"dqbuf: Wrong type.\n");
- goto done;
- }
- if (list_empty(&q->stream)) {
- dprintk(1,"dqbuf: stream running\n");
- goto done;
- }
- buf = list_entry(q->stream.next, struct videobuf_buffer, stream);
- retval = videobuf_waiton(buf, nonblocking, 1);
- if (retval < 0) {
- dprintk(1,"dqbuf: waiton returned %d\n",retval);
- goto done;
- }
- switch (buf->state) {
- case STATE_ERROR:
- dprintk(1,"dqbuf: state is error\n");
- retval = -EIO;
- videobuf_dma_sync(q,&buf->dma);
- buf->state = STATE_IDLE;
- break;
- case STATE_DONE:
- dprintk(1,"dqbuf: state is done\n");
- videobuf_dma_sync(q,&buf->dma);
- buf->state = STATE_IDLE;
- break;
- default:
- dprintk(1,"dqbuf: state invalid\n");
- retval = -EINVAL;
- goto done;
- }
- list_del(&buf->stream);
- memset(b,0,sizeof(*b));
- videobuf_status(b,buf,q->type);
-
- done:
- mutex_unlock(&q->lock);
- return retval;
-}
-
-int videobuf_streamon(struct videobuf_queue *q)
-{
- struct videobuf_buffer *buf;
- struct list_head *list;
- unsigned long flags=0;
- int retval;
-
- mutex_lock(&q->lock);
- retval = -EBUSY;
- if (q->reading)
- goto done;
- retval = 0;
- if (q->streaming)
- goto done;
- q->streaming = 1;
- if (q->irqlock)
- spin_lock_irqsave(q->irqlock,flags);
- list_for_each(list,&q->stream) {
- buf = list_entry(list, struct videobuf_buffer, stream);
- if (buf->state == STATE_PREPARED)
- q->ops->buf_queue(q,buf);
- }
- if (q->irqlock)
- spin_unlock_irqrestore(q->irqlock,flags);
-
- done:
- mutex_unlock(&q->lock);
- return retval;
-}
-
-int videobuf_streamoff(struct videobuf_queue *q)
-{
- int retval = -EINVAL;
-
- mutex_lock(&q->lock);
- if (!q->streaming)
- goto done;
- videobuf_queue_cancel(q);
- q->streaming = 0;
- retval = 0;
-
- done:
- mutex_unlock(&q->lock);
- return retval;
-}
-
-static ssize_t
-videobuf_read_zerocopy(struct videobuf_queue *q, char __user *data,
- size_t count, loff_t *ppos)
-{
- enum v4l2_field field;
- unsigned long flags=0;
- int retval;
-
- /* setup stuff */
- q->read_buf = videobuf_alloc(q->msize);
- if (NULL == q->read_buf)
- return -ENOMEM;
-
- q->read_buf->memory = V4L2_MEMORY_USERPTR;
- q->read_buf->baddr = (unsigned long)data;
- q->read_buf->bsize = count;
- field = videobuf_next_field(q);
- retval = q->ops->buf_prepare(q,q->read_buf,field);
- if (0 != retval)
- goto done;
-
- /* start capture & wait */
- if (q->irqlock)
- spin_lock_irqsave(q->irqlock,flags);
- q->ops->buf_queue(q,q->read_buf);
- if (q->irqlock)
- spin_unlock_irqrestore(q->irqlock,flags);
- retval = videobuf_waiton(q->read_buf,0,0);
- if (0 == retval) {
- videobuf_dma_sync(q,&q->read_buf->dma);
- if (STATE_ERROR == q->read_buf->state)
- retval = -EIO;
- else
- retval = q->read_buf->size;
- }
-
- done:
- /* cleanup */
- q->ops->buf_release(q,q->read_buf);
- kfree(q->read_buf);
- q->read_buf = NULL;
- return retval;
-}
-
-ssize_t videobuf_read_one(struct videobuf_queue *q,
- char __user *data, size_t count, loff_t *ppos,
- int nonblocking)
-{
- enum v4l2_field field;
- unsigned long flags=0;
- unsigned size, nbufs, bytes;
- int retval;
-
- mutex_lock(&q->lock);
-
- nbufs = 1; size = 0;
- q->ops->buf_setup(q,&nbufs,&size);
- if (NULL == q->read_buf &&
- count >= size &&
- !nonblocking) {
- retval = videobuf_read_zerocopy(q,data,count,ppos);
- if (retval >= 0 || retval == -EIO)
- /* ok, all done */
- goto done;
- /* fallback to kernel bounce buffer on failures */
- }
-
- if (NULL == q->read_buf) {
- /* need to capture a new frame */
- retval = -ENOMEM;
- q->read_buf = videobuf_alloc(q->msize);
- dprintk(1,"video alloc=0x%p\n", q->read_buf);
- if (NULL == q->read_buf)
- goto done;
- q->read_buf->memory = V4L2_MEMORY_USERPTR;
- q->read_buf->bsize = count; /* preferred size */
- field = videobuf_next_field(q);
- retval = q->ops->buf_prepare(q,q->read_buf,field);
- if (0 != retval) {
- kfree (q->read_buf);
- q->read_buf = NULL;
- goto done;
- }
- if (q->irqlock)
- spin_lock_irqsave(q->irqlock,flags);
- q->ops->buf_queue(q,q->read_buf);
- if (q->irqlock)
- spin_unlock_irqrestore(q->irqlock,flags);
- q->read_off = 0;
- }
-
- /* wait until capture is done */
- retval = videobuf_waiton(q->read_buf, nonblocking, 1);
- if (0 != retval)
- goto done;
- videobuf_dma_sync(q,&q->read_buf->dma);
-
- if (STATE_ERROR == q->read_buf->state) {
- /* catch I/O errors */
- q->ops->buf_release(q,q->read_buf);
- kfree(q->read_buf);
- q->read_buf = NULL;
- retval = -EIO;
- goto done;
- }
-
- /* copy to userspace */
- bytes = count;
- if (bytes > q->read_buf->size - q->read_off)
- bytes = q->read_buf->size - q->read_off;
- retval = -EFAULT;
- if (copy_to_user(data, q->read_buf->dma.vmalloc+q->read_off, bytes))
- goto done;
-
- retval = bytes;
- q->read_off += bytes;
- if (q->read_off == q->read_buf->size) {
- /* all data copied, cleanup */
- q->ops->buf_release(q,q->read_buf);
- kfree(q->read_buf);
- q->read_buf = NULL;
- }
-
- done:
- mutex_unlock(&q->lock);
- return retval;
-}
-
-int videobuf_read_start(struct videobuf_queue *q)
-{
- enum v4l2_field field;
- unsigned long flags=0;
- int count = 0, size = 0;
- int err, i;
-
- q->ops->buf_setup(q,&count,&size);
- if (count < 2)
- count = 2;
- if (count > VIDEO_MAX_FRAME)
- count = VIDEO_MAX_FRAME;
- size = PAGE_ALIGN(size);
-
- err = videobuf_mmap_setup(q, count, size, V4L2_MEMORY_USERPTR);
- if (err)
- return err;
- for (i = 0; i < count; i++) {
- field = videobuf_next_field(q);
- err = q->ops->buf_prepare(q,q->bufs[i],field);
- if (err)
- return err;
- list_add_tail(&q->bufs[i]->stream, &q->stream);
- }
- if (q->irqlock)
- spin_lock_irqsave(q->irqlock,flags);
- for (i = 0; i < count; i++)
- q->ops->buf_queue(q,q->bufs[i]);
- if (q->irqlock)
- spin_unlock_irqrestore(q->irqlock,flags);
- q->reading = 1;
- return 0;
-}
-
-void videobuf_read_stop(struct videobuf_queue *q)
-{
- int i;
-
- videobuf_queue_cancel(q);
- videobuf_mmap_free(q);
- INIT_LIST_HEAD(&q->stream);
- for (i = 0; i < VIDEO_MAX_FRAME; i++) {
- if (NULL == q->bufs[i])
- continue;
- kfree(q->bufs[i]);
- q->bufs[i] = NULL;
- }
- q->read_buf = NULL;
- q->reading = 0;
-}
-
-ssize_t videobuf_read_stream(struct videobuf_queue *q,
- char __user *data, size_t count, loff_t *ppos,
- int vbihack, int nonblocking)
-{
- unsigned int *fc, bytes;
- int err, retval;
- unsigned long flags=0;
-
- dprintk(2,"%s\n",__FUNCTION__);
- mutex_lock(&q->lock);
- retval = -EBUSY;
- if (q->streaming)
- goto done;
- if (!q->reading) {
- retval = videobuf_read_start(q);
- if (retval < 0)
- goto done;
- }
-
- retval = 0;
- while (count > 0) {
- /* get / wait for data */
- if (NULL == q->read_buf) {
- q->read_buf = list_entry(q->stream.next,
- struct videobuf_buffer,
- stream);
- list_del(&q->read_buf->stream);
- q->read_off = 0;
- }
- err = videobuf_waiton(q->read_buf, nonblocking, 1);
- if (err < 0) {
- if (0 == retval)
- retval = err;
- break;
- }
-
- if (q->read_buf->state == STATE_DONE) {
- if (vbihack) {
- /* dirty, undocumented hack -- pass the frame counter
- * within the last four bytes of each vbi data block.
- * We need that one to maintain backward compatibility
- * to all vbi decoding software out there ... */
- fc = (unsigned int*)q->read_buf->dma.vmalloc;
- fc += (q->read_buf->size>>2) -1;
- *fc = q->read_buf->field_count >> 1;
- dprintk(1,"vbihack: %d\n",*fc);
- }
-
- /* copy stuff */
- bytes = count;
- if (bytes > q->read_buf->size - q->read_off)
- bytes = q->read_buf->size - q->read_off;
- if (copy_to_user(data + retval,
- q->read_buf->dma.vmalloc + q->read_off,
- bytes)) {
- if (0 == retval)
- retval = -EFAULT;
- break;
- }
- count -= bytes;
- retval += bytes;
- q->read_off += bytes;
- } else {
- /* some error */
- q->read_off = q->read_buf->size;
- if (0 == retval)
- retval = -EIO;
- }
-
- /* requeue buffer when done with copying */
- if (q->read_off == q->read_buf->size) {
- list_add_tail(&q->read_buf->stream,
- &q->stream);
- if (q->irqlock)
- spin_lock_irqsave(q->irqlock,flags);
- q->ops->buf_queue(q,q->read_buf);
- if (q->irqlock)
- spin_unlock_irqrestore(q->irqlock,flags);
- q->read_buf = NULL;
- }
- if (retval < 0)
- break;
- }
-
- done:
- mutex_unlock(&q->lock);
- return retval;
-}
-
-unsigned int videobuf_poll_stream(struct file *file,
- struct videobuf_queue *q,
- poll_table *wait)
-{
- struct videobuf_buffer *buf = NULL;
- unsigned int rc = 0;
-
- mutex_lock(&q->lock);
- if (q->streaming) {
- if (!list_empty(&q->stream))
- buf = list_entry(q->stream.next,
- struct videobuf_buffer, stream);
- } else {
- if (!q->reading)
- videobuf_read_start(q);
- if (!q->reading) {
- rc = POLLERR;
- } else if (NULL == q->read_buf) {
- q->read_buf = list_entry(q->stream.next,
- struct videobuf_buffer,
- stream);
- list_del(&q->read_buf->stream);
- q->read_off = 0;
- }
- buf = q->read_buf;
- }
- if (!buf)
- rc = POLLERR;
-
- if (0 == rc) {
- poll_wait(file, &buf->done, wait);
- if (buf->state == STATE_DONE ||
- buf->state == STATE_ERROR)
- rc = POLLIN|POLLRDNORM;
- }
- mutex_unlock(&q->lock);
- return rc;
-}
-
-/* --------------------------------------------------------------------- */
-
-static void
-videobuf_vm_open(struct vm_area_struct *vma)
-{
- struct videobuf_mapping *map = vma->vm_private_data;
-
- dprintk(2,"vm_open %p [count=%d,vma=%08lx-%08lx]\n",map,
- map->count,vma->vm_start,vma->vm_end);
- map->count++;
-}
-
-static void
-videobuf_vm_close(struct vm_area_struct *vma)
-{
- struct videobuf_mapping *map = vma->vm_private_data;
- struct videobuf_queue *q = map->q;
- int i;
-
- dprintk(2,"vm_close %p [count=%d,vma=%08lx-%08lx]\n",map,
- map->count,vma->vm_start,vma->vm_end);
-
- map->count--;
- if (0 == map->count) {
- dprintk(1,"munmap %p q=%p\n",map,q);
- mutex_lock(&q->lock);
- for (i = 0; i < VIDEO_MAX_FRAME; i++) {
- if (NULL == q->bufs[i])
- continue;
- if (q->bufs[i])
- ;
- if (q->bufs[i]->map != map)
- continue;
- q->bufs[i]->map = NULL;
- q->bufs[i]->baddr = 0;
- q->ops->buf_release(q,q->bufs[i]);
- }
- mutex_unlock(&q->lock);
- kfree(map);
- }
- return;
-}
-
-/*
- * Get a anonymous page for the mapping. Make sure we can DMA to that
- * memory location with 32bit PCI devices (i.e. don't use highmem for
- * now ...). Bounce buffers don't work very well for the data rates
- * video capture has.
- */
-static struct page*
-videobuf_vm_nopage(struct vm_area_struct *vma, unsigned long vaddr,
- int *type)
-{
- struct page *page;
-
- dprintk(3,"nopage: fault @ %08lx [vma %08lx-%08lx]\n",
- vaddr,vma->vm_start,vma->vm_end);
- if (vaddr > vma->vm_end)
- return NOPAGE_SIGBUS;
- page = alloc_page(GFP_USER | __GFP_DMA32);
- if (!page)
- return NOPAGE_OOM;
- clear_user_page(page_address(page), vaddr, page);
- if (type)
- *type = VM_FAULT_MINOR;
- return page;
-}
-
-static struct vm_operations_struct videobuf_vm_ops =
-{
- .open = videobuf_vm_open,
- .close = videobuf_vm_close,
- .nopage = videobuf_vm_nopage,
-};
-
-int videobuf_mmap_setup(struct videobuf_queue *q,
- unsigned int bcount, unsigned int bsize,
- enum v4l2_memory memory)
-{
- unsigned int i;
- int err;
-
- err = videobuf_mmap_free(q);
- if (0 != err)
- return err;
-
- for (i = 0; i < bcount; i++) {
- q->bufs[i] = videobuf_alloc(q->msize);
- q->bufs[i]->i = i;
- q->bufs[i]->input = UNSET;
- q->bufs[i]->memory = memory;
- q->bufs[i]->bsize = bsize;
- switch (memory) {
- case V4L2_MEMORY_MMAP:
- q->bufs[i]->boff = bsize * i;
- break;
- case V4L2_MEMORY_USERPTR:
- case V4L2_MEMORY_OVERLAY:
- /* nothing */
- break;
- }
- }
- dprintk(1,"mmap setup: %d buffers, %d bytes each\n",
- bcount,bsize);
- return 0;
-}
-
-int videobuf_mmap_free(struct videobuf_queue *q)
-{
- int i;
-
- for (i = 0; i < VIDEO_MAX_FRAME; i++)
- if (q->bufs[i] && q->bufs[i]->map)
- return -EBUSY;
- for (i = 0; i < VIDEO_MAX_FRAME; i++) {
- if (NULL == q->bufs[i])
- continue;
- q->ops->buf_release(q,q->bufs[i]);
- kfree(q->bufs[i]);
- q->bufs[i] = NULL;
- }
- return 0;
-}
-
-int videobuf_mmap_mapper(struct videobuf_queue *q,
- struct vm_area_struct *vma)
-{
- struct videobuf_mapping *map;
- unsigned int first,last,size,i;
- int retval;
-
- mutex_lock(&q->lock);
- retval = -EINVAL;
- if (!(vma->vm_flags & VM_WRITE)) {
- dprintk(1,"mmap app bug: PROT_WRITE please\n");
- goto done;
- }
- if (!(vma->vm_flags & VM_SHARED)) {
- dprintk(1,"mmap app bug: MAP_SHARED please\n");
- goto done;
- }
-
- /* look for first buffer to map */
- for (first = 0; first < VIDEO_MAX_FRAME; first++) {
- if (NULL == q->bufs[first])
- continue;
- if (V4L2_MEMORY_MMAP != q->bufs[first]->memory)
- continue;
- if (q->bufs[first]->boff == (vma->vm_pgoff << PAGE_SHIFT))
- break;
- }
- if (VIDEO_MAX_FRAME == first) {
- dprintk(1,"mmap app bug: offset invalid [offset=0x%lx]\n",
- (vma->vm_pgoff << PAGE_SHIFT));
- goto done;
- }
-
- /* look for last buffer to map */
- for (size = 0, last = first; last < VIDEO_MAX_FRAME; last++) {
- if (NULL == q->bufs[last])
- continue;
- if (V4L2_MEMORY_MMAP != q->bufs[last]->memory)
- continue;
- if (q->bufs[last]->map) {
- retval = -EBUSY;
- goto done;
- }
- size += q->bufs[last]->bsize;
- if (size == (vma->vm_end - vma->vm_start))
- break;
- }
- if (VIDEO_MAX_FRAME == last) {
- dprintk(1,"mmap app bug: size invalid [size=0x%lx]\n",
- (vma->vm_end - vma->vm_start));
- goto done;
- }
-
- /* create mapping + update buffer list */
- retval = -ENOMEM;
- map = kmalloc(sizeof(struct videobuf_mapping),GFP_KERNEL);
- if (NULL == map)
- goto done;
- for (size = 0, i = first; i <= last; size += q->bufs[i++]->bsize) {
- q->bufs[i]->map = map;
- q->bufs[i]->baddr = vma->vm_start + size;
- }
- map->count = 1;
- map->start = vma->vm_start;
- map->end = vma->vm_end;
- map->q = q;
- vma->vm_ops = &videobuf_vm_ops;
- vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED;
- vma->vm_flags &= ~VM_IO; /* using shared anonymous pages */
- vma->vm_private_data = map;
- dprintk(1,"mmap %p: q=%p %08lx-%08lx pgoff %08lx bufs %d-%d\n",
- map,q,vma->vm_start,vma->vm_end,vma->vm_pgoff,first,last);
- retval = 0;
-
- done:
- mutex_unlock(&q->lock);
- return retval;
-}
-
-/* --------------------------------------------------------------------- */
-
-EXPORT_SYMBOL_GPL(videobuf_vmalloc_to_sg);
-
-EXPORT_SYMBOL_GPL(videobuf_dma_init);
-EXPORT_SYMBOL_GPL(videobuf_dma_init_user);
-EXPORT_SYMBOL_GPL(videobuf_dma_init_kernel);
-EXPORT_SYMBOL_GPL(videobuf_dma_init_overlay);
-EXPORT_SYMBOL_GPL(videobuf_dma_map);
-EXPORT_SYMBOL_GPL(videobuf_dma_sync);
-EXPORT_SYMBOL_GPL(videobuf_dma_unmap);
-EXPORT_SYMBOL_GPL(videobuf_dma_free);
-
-EXPORT_SYMBOL_GPL(videobuf_pci_dma_map);
-EXPORT_SYMBOL_GPL(videobuf_pci_dma_unmap);
-
-EXPORT_SYMBOL_GPL(videobuf_alloc);
-EXPORT_SYMBOL_GPL(videobuf_waiton);
-EXPORT_SYMBOL_GPL(videobuf_iolock);
-
-EXPORT_SYMBOL_GPL(videobuf_queue_init);
-EXPORT_SYMBOL_GPL(videobuf_queue_cancel);
-EXPORT_SYMBOL_GPL(videobuf_queue_is_busy);
-
-EXPORT_SYMBOL_GPL(videobuf_next_field);
-EXPORT_SYMBOL_GPL(videobuf_status);
-EXPORT_SYMBOL_GPL(videobuf_reqbufs);
-EXPORT_SYMBOL_GPL(videobuf_querybuf);
-EXPORT_SYMBOL_GPL(videobuf_qbuf);
-EXPORT_SYMBOL_GPL(videobuf_dqbuf);
-EXPORT_SYMBOL_GPL(videobuf_streamon);
-EXPORT_SYMBOL_GPL(videobuf_streamoff);
-
-EXPORT_SYMBOL_GPL(videobuf_read_start);
-EXPORT_SYMBOL_GPL(videobuf_read_stop);
-EXPORT_SYMBOL_GPL(videobuf_read_stream);
-EXPORT_SYMBOL_GPL(videobuf_read_one);
-EXPORT_SYMBOL_GPL(videobuf_poll_stream);
-
-EXPORT_SYMBOL_GPL(videobuf_mmap_setup);
-EXPORT_SYMBOL_GPL(videobuf_mmap_free);
-EXPORT_SYMBOL_GPL(videobuf_mmap_mapper);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c
new file mode 100644
index 00000000000..c606332512b
--- /dev/null
+++ b/drivers/media/video/videobuf-core.c
@@ -0,0 +1,1006 @@
+/*
+ * generic helper functions for handling video4linux capture buffers
+ *
+ * (c) 2007 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ *
+ * Highly based on video-buf written originally by:
+ * (c) 2001,02 Gerd Knorr <kraxel@bytesex.org>
+ * (c) 2006 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ * (c) 2006 Ted Walther and John Sokol
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include <media/videobuf-core.h>
+
+#define MAGIC_BUFFER 0x20070728
+#define MAGIC_CHECK(is,should) if (unlikely((is) != (should))) \
+ { printk(KERN_ERR "magic mismatch: %x (expected %x)\n",is,should); BUG(); }
+
+static int debug = 0;
+module_param(debug, int, 0644);
+
+MODULE_DESCRIPTION("helper module to manage video4linux buffers");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
+MODULE_LICENSE("GPL");
+
+#define dprintk(level, fmt, arg...) if (debug >= level) \
+ printk(KERN_DEBUG "vbuf: " fmt , ## arg)
+
+/* --------------------------------------------------------------------- */
+
+#define CALL(q, f, arg...) \
+ ( (q->int_ops->f)? q->int_ops->f(arg) : 0)
+
+void* videobuf_alloc(struct videobuf_queue* q)
+{
+ struct videobuf_buffer *vb;
+
+ BUG_ON (q->msize<sizeof(*vb));
+
+ if (!q->int_ops || !q->int_ops->alloc) {
+ printk(KERN_ERR "No specific ops defined!\n");
+ BUG();
+ }
+
+ vb = q->int_ops->alloc(q->msize);
+
+ if (NULL != vb) {
+ init_waitqueue_head(&vb->done);
+ vb->magic = MAGIC_BUFFER;
+ }
+
+ return vb;
+}
+
+int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr)
+{
+ int retval = 0;
+ DECLARE_WAITQUEUE(wait, current);
+
+ MAGIC_CHECK(vb->magic,MAGIC_BUFFER);
+ add_wait_queue(&vb->done, &wait);
+ while (vb->state == STATE_ACTIVE || vb->state == STATE_QUEUED) {
+ if (non_blocking) {
+ retval = -EAGAIN;
+ break;
+ }
+ set_current_state(intr ? TASK_INTERRUPTIBLE
+ : TASK_UNINTERRUPTIBLE);
+ if (vb->state == STATE_ACTIVE || vb->state == STATE_QUEUED)
+ schedule();
+ set_current_state(TASK_RUNNING);
+ if (intr && signal_pending(current)) {
+ dprintk(1,"buffer waiton: -EINTR\n");
+ retval = -EINTR;
+ break;
+ }
+ }
+ remove_wait_queue(&vb->done, &wait);
+ return retval;
+}
+
+int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,
+ struct v4l2_framebuffer *fbuf)
+{
+ MAGIC_CHECK(vb->magic,MAGIC_BUFFER);
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ /* FIXME: This is required to avoid OOPS on some cases, since mmap_mapper()
+ method should be called before _iolock.
+ On some cases, the mmap_mapper() is called only after scheduling.
+
+ However, this way is just too dirty! Better to wait for some event.
+ */
+ schedule_timeout(HZ);
+
+ return CALL(q,iolock,q,vb,fbuf);
+}
+
+/* --------------------------------------------------------------------- */
+
+
+void videobuf_queue_core_init(struct videobuf_queue* q,
+ struct videobuf_queue_ops *ops,
+ void *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv,
+ struct videobuf_qtype_ops *int_ops)
+{
+ memset(q,0,sizeof(*q));
+ q->irqlock = irqlock;
+ q->dev = dev;
+ q->type = type;
+ q->field = field;
+ q->msize = msize;
+ q->ops = ops;
+ q->priv_data = priv;
+ q->int_ops = int_ops;
+
+ /* All buffer operations are mandatory */
+ BUG_ON (!q->ops->buf_setup);
+ BUG_ON (!q->ops->buf_prepare);
+ BUG_ON (!q->ops->buf_queue);
+ BUG_ON (!q->ops->buf_release);
+
+ /* Having implementations for abstract methods are mandatory */
+ BUG_ON (!q->int_ops);
+
+ mutex_init(&q->lock);
+ INIT_LIST_HEAD(&q->stream);
+}
+
+int videobuf_queue_is_busy(struct videobuf_queue *q)
+{
+ int i;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ if (q->streaming) {
+ dprintk(1,"busy: streaming active\n");
+ return 1;
+ }
+ if (q->reading) {
+ dprintk(1,"busy: pending read #1\n");
+ return 1;
+ }
+ if (q->read_buf) {
+ dprintk(1,"busy: pending read #2\n");
+ return 1;
+ }
+ for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+ if (NULL == q->bufs[i])
+ continue;
+ if (q->bufs[i]->map) {
+ dprintk(1,"busy: buffer #%d mapped\n",i);
+ return 1;
+ }
+ if (q->bufs[i]->state == STATE_QUEUED) {
+ dprintk(1,"busy: buffer #%d queued\n",i);
+ return 1;
+ }
+ if (q->bufs[i]->state == STATE_ACTIVE) {
+ dprintk(1,"busy: buffer #%d avtive\n",i);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+void videobuf_queue_cancel(struct videobuf_queue *q)
+{
+ unsigned long flags=0;
+ int i;
+
+ /* remove queued buffers from list */
+ if (q->irqlock)
+ spin_lock_irqsave(q->irqlock,flags);
+ for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+ if (NULL == q->bufs[i])
+ continue;
+ if (q->bufs[i]->state == STATE_QUEUED) {
+ list_del(&q->bufs[i]->queue);
+ q->bufs[i]->state = STATE_ERROR;
+ }
+ }
+ if (q->irqlock)
+ spin_unlock_irqrestore(q->irqlock,flags);
+
+ /* free all buffers + clear queue */
+ for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+ if (NULL == q->bufs[i])
+ continue;
+ q->ops->buf_release(q,q->bufs[i]);
+ }
+ INIT_LIST_HEAD(&q->stream);
+}
+
+/* --------------------------------------------------------------------- */
+
+enum v4l2_field videobuf_next_field(struct videobuf_queue *q)
+{
+ enum v4l2_field field = q->field;
+
+ BUG_ON(V4L2_FIELD_ANY == field);
+
+ if (V4L2_FIELD_ALTERNATE == field) {
+ if (V4L2_FIELD_TOP == q->last) {
+ field = V4L2_FIELD_BOTTOM;
+ q->last = V4L2_FIELD_BOTTOM;
+ } else {
+ field = V4L2_FIELD_TOP;
+ q->last = V4L2_FIELD_TOP;
+ }
+ }
+ return field;
+}
+
+static void videobuf_status(struct videobuf_queue *q, struct v4l2_buffer *b,
+ struct videobuf_buffer *vb, enum v4l2_buf_type type)
+{
+ MAGIC_CHECK(vb->magic,MAGIC_BUFFER);
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ b->index = vb->i;
+ b->type = type;
+
+ b->memory = vb->memory;
+ switch (b->memory) {
+ case V4L2_MEMORY_MMAP:
+ b->m.offset = vb->boff;
+ b->length = vb->bsize;
+ break;
+ case V4L2_MEMORY_USERPTR:
+ b->m.userptr = vb->baddr;
+ b->length = vb->bsize;
+ break;
+ case V4L2_MEMORY_OVERLAY:
+ b->m.offset = vb->boff;
+ break;
+ }
+
+ b->flags = 0;
+ if (vb->map)
+ b->flags |= V4L2_BUF_FLAG_MAPPED;
+
+ switch (vb->state) {
+ case STATE_PREPARED:
+ case STATE_QUEUED:
+ case STATE_ACTIVE:
+ b->flags |= V4L2_BUF_FLAG_QUEUED;
+ break;
+ case STATE_DONE:
+ case STATE_ERROR:
+ b->flags |= V4L2_BUF_FLAG_DONE;
+ break;
+ case STATE_NEEDS_INIT:
+ case STATE_IDLE:
+ /* nothing */
+ break;
+ }
+
+ if (vb->input != UNSET) {
+ b->flags |= V4L2_BUF_FLAG_INPUT;
+ b->input = vb->input;
+ }
+
+ b->field = vb->field;
+ b->timestamp = vb->ts;
+ b->bytesused = vb->size;
+ b->sequence = vb->field_count >> 1;
+}
+
+int videobuf_reqbufs(struct videobuf_queue *q,
+ struct v4l2_requestbuffers *req)
+{
+ unsigned int size,count;
+ int retval;
+
+ if (req->type != q->type) {
+ dprintk(1,"reqbufs: queue type invalid\n");
+ return -EINVAL;
+ }
+ if (req->count < 1) {
+ dprintk(1,"reqbufs: count invalid (%d)\n",req->count);
+ return -EINVAL;
+ }
+ if (req->memory != V4L2_MEMORY_MMAP &&
+ req->memory != V4L2_MEMORY_USERPTR &&
+ req->memory != V4L2_MEMORY_OVERLAY) {
+ dprintk(1,"reqbufs: memory type invalid\n");
+ return -EINVAL;
+ }
+
+ mutex_lock(&q->lock);
+ if (q->streaming) {
+ dprintk(1,"reqbufs: streaming already exists\n");
+ retval = -EBUSY;
+ goto done;
+ }
+ if (!list_empty(&q->stream)) {
+ dprintk(1,"reqbufs: stream running\n");
+ retval = -EBUSY;
+ goto done;
+ }
+
+ count = req->count;
+ if (count > VIDEO_MAX_FRAME)
+ count = VIDEO_MAX_FRAME;
+ size = 0;
+ q->ops->buf_setup(q,&count,&size);
+ size = PAGE_ALIGN(size);
+ dprintk(1,"reqbufs: bufs=%d, size=0x%x [%d pages total]\n",
+ count, size, (count*size)>>PAGE_SHIFT);
+
+ retval = videobuf_mmap_setup(q,count,size,req->memory);
+ if (retval < 0) {
+ dprintk(1,"reqbufs: mmap setup returned %d\n",retval);
+ goto done;
+ }
+
+ req->count = retval;
+
+ done:
+ mutex_unlock(&q->lock);
+ return retval;
+}
+
+int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b)
+{
+ if (unlikely(b->type != q->type)) {
+ dprintk(1,"querybuf: Wrong type.\n");
+ return -EINVAL;
+ }
+ if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME)) {
+ dprintk(1,"querybuf: index out of range.\n");
+ return -EINVAL;
+ }
+ if (unlikely(NULL == q->bufs[b->index])) {
+ dprintk(1,"querybuf: buffer is null.\n");
+ return -EINVAL;
+ }
+ videobuf_status(q,b,q->bufs[b->index],q->type);
+ return 0;
+}
+
+int videobuf_qbuf(struct videobuf_queue *q,
+ struct v4l2_buffer *b)
+{
+ struct videobuf_buffer *buf;
+ enum v4l2_field field;
+ unsigned long flags=0;
+ int retval;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ if (b->memory == V4L2_MEMORY_MMAP)
+ down_read(&current->mm->mmap_sem);
+
+ mutex_lock(&q->lock);
+ retval = -EBUSY;
+ if (q->reading) {
+ dprintk(1,"qbuf: Reading running...\n");
+ goto done;
+ }
+ retval = -EINVAL;
+ if (b->type != q->type) {
+ dprintk(1,"qbuf: Wrong type.\n");
+ goto done;
+ }
+ if (b->index < 0 || b->index >= VIDEO_MAX_FRAME) {
+ dprintk(1,"qbuf: index out of range.\n");
+ goto done;
+ }
+ buf = q->bufs[b->index];
+ if (NULL == buf) {
+ dprintk(1,"qbuf: buffer is null.\n");
+ goto done;
+ }
+ MAGIC_CHECK(buf->magic,MAGIC_BUFFER);
+ if (buf->memory != b->memory) {
+ dprintk(1,"qbuf: memory type is wrong.\n");
+ goto done;
+ }
+ if (buf->state != STATE_NEEDS_INIT && buf->state != STATE_IDLE) {
+ dprintk(1,"qbuf: buffer is already queued or active.\n");
+ goto done;
+ }
+
+ if (b->flags & V4L2_BUF_FLAG_INPUT) {
+ if (b->input >= q->inputs) {
+ dprintk(1,"qbuf: wrong input.\n");
+ goto done;
+ }
+ buf->input = b->input;
+ } else {
+ buf->input = UNSET;
+ }
+
+ switch (b->memory) {
+ case V4L2_MEMORY_MMAP:
+ if (0 == buf->baddr) {
+ dprintk(1,"qbuf: mmap requested but buffer addr is zero!\n");
+ goto done;
+ }
+ break;
+ case V4L2_MEMORY_USERPTR:
+ if (b->length < buf->bsize) {
+ dprintk(1,"qbuf: buffer length is not enough\n");
+ goto done;
+ }
+ if (STATE_NEEDS_INIT != buf->state && buf->baddr != b->m.userptr)
+ q->ops->buf_release(q,buf);
+ buf->baddr = b->m.userptr;
+ break;
+ case V4L2_MEMORY_OVERLAY:
+ buf->boff = b->m.offset;
+ break;
+ default:
+ dprintk(1,"qbuf: wrong memory type\n");
+ goto done;
+ }
+
+ dprintk(1,"qbuf: requesting next field\n");
+ field = videobuf_next_field(q);
+ retval = q->ops->buf_prepare(q,buf,field);
+ if (0 != retval) {
+ dprintk(1,"qbuf: buffer_prepare returned %d\n",retval);
+ goto done;
+ }
+
+ list_add_tail(&buf->stream,&q->stream);
+ if (q->streaming) {
+ if (q->irqlock)
+ spin_lock_irqsave(q->irqlock,flags);
+ q->ops->buf_queue(q,buf);
+ if (q->irqlock)
+ spin_unlock_irqrestore(q->irqlock,flags);
+ }
+ dprintk(1,"qbuf: succeded\n");
+ retval = 0;
+
+ done:
+ mutex_unlock(&q->lock);
+
+ if (b->memory == V4L2_MEMORY_MMAP)
+ up_read(&current->mm->mmap_sem);
+
+ return retval;
+}
+
+int videobuf_dqbuf(struct videobuf_queue *q,
+ struct v4l2_buffer *b, int nonblocking)
+{
+ struct videobuf_buffer *buf;
+ int retval;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ mutex_lock(&q->lock);
+ retval = -EBUSY;
+ if (q->reading) {
+ dprintk(1,"dqbuf: Reading running...\n");
+ goto done;
+ }
+ retval = -EINVAL;
+ if (b->type != q->type) {
+ dprintk(1,"dqbuf: Wrong type.\n");
+ goto done;
+ }
+ if (list_empty(&q->stream)) {
+ dprintk(1,"dqbuf: stream running\n");
+ goto done;
+ }
+ buf = list_entry(q->stream.next, struct videobuf_buffer, stream);
+ retval = videobuf_waiton(buf, nonblocking, 1);
+ if (retval < 0) {
+ dprintk(1,"dqbuf: waiton returned %d\n",retval);
+ goto done;
+ }
+ switch (buf->state) {
+ case STATE_ERROR:
+ dprintk(1,"dqbuf: state is error\n");
+ retval = -EIO;
+ CALL(q,sync,q, buf);
+ buf->state = STATE_IDLE;
+ break;
+ case STATE_DONE:
+ dprintk(1,"dqbuf: state is done\n");
+ CALL(q,sync,q, buf);
+ buf->state = STATE_IDLE;
+ break;
+ default:
+ dprintk(1,"dqbuf: state invalid\n");
+ retval = -EINVAL;
+ goto done;
+ }
+ list_del(&buf->stream);
+ memset(b,0,sizeof(*b));
+ videobuf_status(q,b,buf,q->type);
+
+ done:
+ mutex_unlock(&q->lock);
+ return retval;
+}
+
+int videobuf_streamon(struct videobuf_queue *q)
+{
+ struct videobuf_buffer *buf;
+ unsigned long flags=0;
+ int retval;
+
+ mutex_lock(&q->lock);
+ retval = -EBUSY;
+ if (q->reading)
+ goto done;
+ retval = 0;
+ if (q->streaming)
+ goto done;
+ q->streaming = 1;
+ if (q->irqlock)
+ spin_lock_irqsave(q->irqlock,flags);
+ list_for_each_entry(buf, &q->stream, stream)
+ if (buf->state == STATE_PREPARED)
+ q->ops->buf_queue(q,buf);
+ if (q->irqlock)
+ spin_unlock_irqrestore(q->irqlock,flags);
+
+ done:
+ mutex_unlock(&q->lock);
+ return retval;
+}
+
+int videobuf_streamoff(struct videobuf_queue *q)
+{
+ int retval = -EINVAL;
+
+ mutex_lock(&q->lock);
+ if (!q->streaming)
+ goto done;
+ videobuf_queue_cancel(q);
+ q->streaming = 0;
+ retval = 0;
+
+ done:
+ mutex_unlock(&q->lock);
+ return retval;
+}
+
+static ssize_t videobuf_read_zerocopy(struct videobuf_queue *q,
+ char __user *data,
+ size_t count, loff_t *ppos)
+{
+ enum v4l2_field field;
+ unsigned long flags=0;
+ int retval;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ /* setup stuff */
+ q->read_buf = videobuf_alloc(q);
+ if (NULL == q->read_buf)
+ return -ENOMEM;
+
+ q->read_buf->memory = V4L2_MEMORY_USERPTR;
+ q->read_buf->baddr = (unsigned long)data;
+ q->read_buf->bsize = count;
+
+ field = videobuf_next_field(q);
+ retval = q->ops->buf_prepare(q,q->read_buf,field);
+ if (0 != retval)
+ goto done;
+
+ /* start capture & wait */
+ if (q->irqlock)
+ spin_lock_irqsave(q->irqlock,flags);
+ q->ops->buf_queue(q,q->read_buf);
+ if (q->irqlock)
+ spin_unlock_irqrestore(q->irqlock,flags);
+ retval = videobuf_waiton(q->read_buf,0,0);
+ if (0 == retval) {
+ CALL(q,sync,q,q->read_buf);
+ if (STATE_ERROR == q->read_buf->state)
+ retval = -EIO;
+ else
+ retval = q->read_buf->size;
+ }
+
+ done:
+ /* cleanup */
+ q->ops->buf_release(q,q->read_buf);
+ kfree(q->read_buf);
+ q->read_buf = NULL;
+ return retval;
+}
+
+ssize_t videobuf_read_one(struct videobuf_queue *q,
+ char __user *data, size_t count, loff_t *ppos,
+ int nonblocking)
+{
+ enum v4l2_field field;
+ unsigned long flags=0;
+ unsigned size, nbufs;
+ int retval;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ mutex_lock(&q->lock);
+
+ nbufs = 1; size = 0;
+ q->ops->buf_setup(q,&nbufs,&size);
+
+ if (NULL == q->read_buf &&
+ count >= size &&
+ !nonblocking) {
+ retval = videobuf_read_zerocopy(q,data,count,ppos);
+ if (retval >= 0 || retval == -EIO)
+ /* ok, all done */
+ goto done;
+ /* fallback to kernel bounce buffer on failures */
+ }
+
+ if (NULL == q->read_buf) {
+ /* need to capture a new frame */
+ retval = -ENOMEM;
+ q->read_buf = videobuf_alloc(q);
+
+ dprintk(1,"video alloc=0x%p\n", q->read_buf);
+ if (NULL == q->read_buf)
+ goto done;
+ q->read_buf->memory = V4L2_MEMORY_USERPTR;
+ q->read_buf->bsize = count; /* preferred size */
+ field = videobuf_next_field(q);
+ retval = q->ops->buf_prepare(q,q->read_buf,field);
+
+ if (0 != retval) {
+ kfree (q->read_buf);
+ q->read_buf = NULL;
+ goto done;
+ }
+ if (q->irqlock)
+ spin_lock_irqsave(q->irqlock,flags);
+
+ q->ops->buf_queue(q,q->read_buf);
+ if (q->irqlock)
+ spin_unlock_irqrestore(q->irqlock,flags);
+ q->read_off = 0;
+ }
+
+ /* wait until capture is done */
+ retval = videobuf_waiton(q->read_buf, nonblocking, 1);
+ if (0 != retval)
+ goto done;
+
+ CALL(q,sync,q,q->read_buf);
+
+ if (STATE_ERROR == q->read_buf->state) {
+ /* catch I/O errors */
+ q->ops->buf_release(q,q->read_buf);
+ kfree(q->read_buf);
+ q->read_buf = NULL;
+ retval = -EIO;
+ goto done;
+ }
+
+ /* Copy to userspace */
+ retval=CALL(q,copy_to_user,q,data,count,nonblocking);
+ if (retval<0)
+ goto done;
+
+ q->read_off += retval;
+ if (q->read_off == q->read_buf->size) {
+ /* all data copied, cleanup */
+ q->ops->buf_release(q,q->read_buf);
+ kfree(q->read_buf);
+ q->read_buf = NULL;
+ }
+
+ done:
+ mutex_unlock(&q->lock);
+ return retval;
+}
+
+int videobuf_read_start(struct videobuf_queue *q)
+{
+ enum v4l2_field field;
+ unsigned long flags=0;
+ unsigned int count = 0, size = 0;
+ int err, i;
+
+ q->ops->buf_setup(q,&count,&size);
+ if (count < 2)
+ count = 2;
+ if (count > VIDEO_MAX_FRAME)
+ count = VIDEO_MAX_FRAME;
+ size = PAGE_ALIGN(size);
+
+ err = videobuf_mmap_setup(q, count, size, V4L2_MEMORY_USERPTR);
+ if (err < 0)
+ return err;
+
+ count = err;
+
+ for (i = 0; i < count; i++) {
+ field = videobuf_next_field(q);
+ err = q->ops->buf_prepare(q,q->bufs[i],field);
+ if (err)
+ return err;
+ list_add_tail(&q->bufs[i]->stream, &q->stream);
+ }
+ if (q->irqlock)
+ spin_lock_irqsave(q->irqlock,flags);
+ for (i = 0; i < count; i++)
+ q->ops->buf_queue(q,q->bufs[i]);
+ if (q->irqlock)
+ spin_unlock_irqrestore(q->irqlock,flags);
+ q->reading = 1;
+ return 0;
+}
+
+void videobuf_read_stop(struct videobuf_queue *q)
+{
+ int i;
+
+ videobuf_queue_cancel(q);
+ videobuf_mmap_free(q);
+ INIT_LIST_HEAD(&q->stream);
+ for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+ if (NULL == q->bufs[i])
+ continue;
+ kfree(q->bufs[i]);
+ q->bufs[i] = NULL;
+ }
+ q->read_buf = NULL;
+ q->reading = 0;
+}
+
+ssize_t videobuf_read_stream(struct videobuf_queue *q,
+ char __user *data, size_t count, loff_t *ppos,
+ int vbihack, int nonblocking)
+{
+ int rc, retval;
+ unsigned long flags=0;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ dprintk(2,"%s\n",__FUNCTION__);
+ mutex_lock(&q->lock);
+ retval = -EBUSY;
+ if (q->streaming)
+ goto done;
+ if (!q->reading) {
+ retval = videobuf_read_start(q);
+ if (retval < 0)
+ goto done;
+ }
+
+ retval = 0;
+ while (count > 0) {
+ /* get / wait for data */
+ if (NULL == q->read_buf) {
+ q->read_buf = list_entry(q->stream.next,
+ struct videobuf_buffer,
+ stream);
+ list_del(&q->read_buf->stream);
+ q->read_off = 0;
+ }
+ rc = videobuf_waiton(q->read_buf, nonblocking, 1);
+ if (rc < 0) {
+ if (0 == retval)
+ retval = rc;
+ break;
+ }
+
+ if (q->read_buf->state == STATE_DONE) {
+ rc = CALL (q,copy_stream, q, data + retval, count,
+ retval, vbihack, nonblocking);
+ if (rc < 0) {
+ retval = rc;
+ break;
+ }
+ retval += rc;
+ count -= rc;
+ q->read_off += rc;
+ } else {
+ /* some error */
+ q->read_off = q->read_buf->size;
+ if (0 == retval)
+ retval = -EIO;
+ }
+
+ /* requeue buffer when done with copying */
+ if (q->read_off == q->read_buf->size) {
+ list_add_tail(&q->read_buf->stream,
+ &q->stream);
+ if (q->irqlock)
+ spin_lock_irqsave(q->irqlock,flags);
+ q->ops->buf_queue(q,q->read_buf);
+ if (q->irqlock)
+ spin_unlock_irqrestore(q->irqlock,flags);
+ q->read_buf = NULL;
+ }
+ if (retval < 0)
+ break;
+ }
+
+ done:
+ mutex_unlock(&q->lock);
+ return retval;
+}
+
+unsigned int videobuf_poll_stream(struct file *file,
+ struct videobuf_queue *q,
+ poll_table *wait)
+{
+ struct videobuf_buffer *buf = NULL;
+ unsigned int rc = 0;
+
+ mutex_lock(&q->lock);
+ if (q->streaming) {
+ if (!list_empty(&q->stream))
+ buf = list_entry(q->stream.next,
+ struct videobuf_buffer, stream);
+ } else {
+ if (!q->reading)
+ videobuf_read_start(q);
+ if (!q->reading) {
+ rc = POLLERR;
+ } else if (NULL == q->read_buf) {
+ q->read_buf = list_entry(q->stream.next,
+ struct videobuf_buffer,
+ stream);
+ list_del(&q->read_buf->stream);
+ q->read_off = 0;
+ }
+ buf = q->read_buf;
+ }
+ if (!buf)
+ rc = POLLERR;
+
+ if (0 == rc) {
+ poll_wait(file, &buf->done, wait);
+ if (buf->state == STATE_DONE ||
+ buf->state == STATE_ERROR)
+ rc = POLLIN|POLLRDNORM;
+ }
+ mutex_unlock(&q->lock);
+ return rc;
+}
+
+int videobuf_mmap_setup(struct videobuf_queue *q,
+ unsigned int bcount, unsigned int bsize,
+ enum v4l2_memory memory)
+{
+ unsigned int i;
+ int err;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ err = videobuf_mmap_free(q);
+ if (0 != err)
+ return err;
+
+ /* Allocate and initialize buffers */
+ for (i = 0; i < bcount; i++) {
+ q->bufs[i] = videobuf_alloc(q);
+
+ if (q->bufs[i] == NULL)
+ break;
+
+ q->bufs[i]->i = i;
+ q->bufs[i]->input = UNSET;
+ q->bufs[i]->memory = memory;
+ q->bufs[i]->bsize = bsize;
+ switch (memory) {
+ case V4L2_MEMORY_MMAP:
+ q->bufs[i]->boff = bsize * i;
+ break;
+ case V4L2_MEMORY_USERPTR:
+ case V4L2_MEMORY_OVERLAY:
+ /* nothing */
+ break;
+ }
+ }
+
+ if (!i)
+ return -ENOMEM;
+
+ dprintk(1,"mmap setup: %d buffers, %d bytes each\n",
+ i, bsize);
+
+ return i;
+}
+
+int videobuf_mmap_free(struct videobuf_queue *q)
+{
+ int i;
+ int rc;
+
+ if (!q)
+ return 0;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ rc = CALL(q,mmap_free,q);
+ if (rc<0)
+ return rc;
+
+ for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+ if (NULL == q->bufs[i])
+ continue;
+ q->ops->buf_release(q,q->bufs[i]);
+ kfree(q->bufs[i]);
+ q->bufs[i] = NULL;
+ }
+
+ return rc;
+}
+
+int videobuf_mmap_mapper(struct videobuf_queue *q,
+ struct vm_area_struct *vma)
+{
+ int retval;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ mutex_lock(&q->lock);
+ retval=CALL(q,mmap_mapper,q,vma);
+ mutex_unlock(&q->lock);
+
+ return retval;
+}
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+int videobuf_cgmbuf(struct videobuf_queue *q,
+ struct video_mbuf *mbuf, int count)
+{
+ struct v4l2_requestbuffers req;
+ int rc,i;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ memset(&req,0,sizeof(req));
+ req.type = q->type;
+ req.count = count;
+ req.memory = V4L2_MEMORY_MMAP;
+ rc = videobuf_reqbufs(q,&req);
+ if (rc < 0)
+ return rc;
+
+ mbuf->frames = req.count;
+ mbuf->size = 0;
+ for (i = 0; i < mbuf->frames; i++) {
+ mbuf->offsets[i] = q->bufs[i]->boff;
+ mbuf->size += q->bufs[i]->bsize;
+ }
+
+ return 0;
+}
+#endif
+
+/* --------------------------------------------------------------------- */
+
+EXPORT_SYMBOL_GPL(videobuf_waiton);
+EXPORT_SYMBOL_GPL(videobuf_iolock);
+
+EXPORT_SYMBOL_GPL(videobuf_alloc);
+
+EXPORT_SYMBOL_GPL(videobuf_queue_core_init);
+EXPORT_SYMBOL_GPL(videobuf_queue_cancel);
+EXPORT_SYMBOL_GPL(videobuf_queue_is_busy);
+
+EXPORT_SYMBOL_GPL(videobuf_next_field);
+EXPORT_SYMBOL_GPL(videobuf_reqbufs);
+EXPORT_SYMBOL_GPL(videobuf_querybuf);
+EXPORT_SYMBOL_GPL(videobuf_qbuf);
+EXPORT_SYMBOL_GPL(videobuf_dqbuf);
+EXPORT_SYMBOL_GPL(videobuf_cgmbuf);
+EXPORT_SYMBOL_GPL(videobuf_streamon);
+EXPORT_SYMBOL_GPL(videobuf_streamoff);
+
+EXPORT_SYMBOL_GPL(videobuf_read_start);
+EXPORT_SYMBOL_GPL(videobuf_read_stop);
+EXPORT_SYMBOL_GPL(videobuf_read_stream);
+EXPORT_SYMBOL_GPL(videobuf_read_one);
+EXPORT_SYMBOL_GPL(videobuf_poll_stream);
+
+EXPORT_SYMBOL_GPL(videobuf_mmap_setup);
+EXPORT_SYMBOL_GPL(videobuf_mmap_free);
+EXPORT_SYMBOL_GPL(videobuf_mmap_mapper);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
new file mode 100644
index 00000000000..8bb7fdd306d
--- /dev/null
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -0,0 +1,726 @@
+/*
+ * helper functions for PCI DMA video4linux capture buffers
+ *
+ * The functions expect the hardware being able to scatter gatter
+ * (i.e. the buffers are not linear in physical memory, but fragmented
+ * into PAGE_SIZE chunks). They also assume the driver does not need
+ * to touch the video data.
+ *
+ * (c) 2007 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ *
+ * Highly based on video-buf written originally by:
+ * (c) 2001,02 Gerd Knorr <kraxel@bytesex.org>
+ * (c) 2006 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ * (c) 2006 Ted Walther and John Sokol
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+#include <media/videobuf-dma-sg.h>
+
+#define MAGIC_DMABUF 0x19721112
+#define MAGIC_SG_MEM 0x17890714
+
+#define MAGIC_CHECK(is,should) if (unlikely((is) != (should))) \
+ { printk(KERN_ERR "magic mismatch: %x (expected %x)\n",is,should); BUG(); }
+
+static int debug = 0;
+module_param(debug, int, 0644);
+
+MODULE_DESCRIPTION("helper module to manage video4linux pci dma sg buffers");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
+MODULE_LICENSE("GPL");
+
+#define dprintk(level, fmt, arg...) if (debug >= level) \
+ printk(KERN_DEBUG "vbuf-sg: " fmt , ## arg)
+
+/* --------------------------------------------------------------------- */
+
+struct scatterlist*
+videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages)
+{
+ struct scatterlist *sglist;
+ struct page *pg;
+ int i;
+
+ sglist = kcalloc(nr_pages, sizeof(struct scatterlist), GFP_KERNEL);
+ if (NULL == sglist)
+ return NULL;
+ for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) {
+ pg = vmalloc_to_page(virt);
+ if (NULL == pg)
+ goto err;
+ BUG_ON(PageHighMem(pg));
+ sglist[i].page = pg;
+ sglist[i].length = PAGE_SIZE;
+ }
+ return sglist;
+
+ err:
+ kfree(sglist);
+ return NULL;
+}
+
+struct scatterlist*
+videobuf_pages_to_sg(struct page **pages, int nr_pages, int offset)
+{
+ struct scatterlist *sglist;
+ int i = 0;
+
+ if (NULL == pages[0])
+ return NULL;
+ sglist = kcalloc(nr_pages, sizeof(*sglist), GFP_KERNEL);
+ if (NULL == sglist)
+ return NULL;
+
+ if (NULL == pages[0])
+ goto nopage;
+ if (PageHighMem(pages[0]))
+ /* DMA to highmem pages might not work */
+ goto highmem;
+ sglist[0].page = pages[0];
+ sglist[0].offset = offset;
+ sglist[0].length = PAGE_SIZE - offset;
+ for (i = 1; i < nr_pages; i++) {
+ if (NULL == pages[i])
+ goto nopage;
+ if (PageHighMem(pages[i]))
+ goto highmem;
+ sglist[i].page = pages[i];
+ sglist[i].length = PAGE_SIZE;
+ }
+ return sglist;
+
+ nopage:
+ dprintk(2,"sgl: oops - no page\n");
+ kfree(sglist);
+ return NULL;
+
+ highmem:
+ dprintk(2,"sgl: oops - highmem page\n");
+ kfree(sglist);
+ return NULL;
+}
+
+/* --------------------------------------------------------------------- */
+
+struct videobuf_dmabuf *videobuf_to_dma (struct videobuf_buffer *buf)
+{
+ struct videbuf_pci_sg_memory *mem=buf->priv;
+ BUG_ON (!mem);
+
+ MAGIC_CHECK(mem->magic,MAGIC_SG_MEM);
+
+ return &mem->dma;
+}
+
+void videobuf_dma_init(struct videobuf_dmabuf *dma)
+{
+ memset(dma,0,sizeof(*dma));
+ dma->magic = MAGIC_DMABUF;
+}
+
+static int videobuf_dma_init_user_locked(struct videobuf_dmabuf *dma,
+ int direction, unsigned long data, unsigned long size)
+{
+ unsigned long first,last;
+ int err, rw = 0;
+
+ dma->direction = direction;
+ switch (dma->direction) {
+ case PCI_DMA_FROMDEVICE: rw = READ; break;
+ case PCI_DMA_TODEVICE: rw = WRITE; break;
+ default: BUG();
+ }
+
+ first = (data & PAGE_MASK) >> PAGE_SHIFT;
+ last = ((data+size-1) & PAGE_MASK) >> PAGE_SHIFT;
+ dma->offset = data & ~PAGE_MASK;
+ dma->nr_pages = last-first+1;
+ dma->pages = kmalloc(dma->nr_pages * sizeof(struct page*),
+ GFP_KERNEL);
+ if (NULL == dma->pages)
+ return -ENOMEM;
+ dprintk(1,"init user [0x%lx+0x%lx => %d pages]\n",
+ data,size,dma->nr_pages);
+
+ dma->varea = (void *) data;
+
+
+ err = get_user_pages(current,current->mm,
+ data & PAGE_MASK, dma->nr_pages,
+ rw == READ, 1, /* force */
+ dma->pages, NULL);
+
+ if (err != dma->nr_pages) {
+ dma->nr_pages = (err >= 0) ? err : 0;
+ dprintk(1,"get_user_pages: err=%d [%d]\n",err,dma->nr_pages);
+ return err < 0 ? err : -EINVAL;
+ }
+ return 0;
+}
+
+int videobuf_dma_init_user(struct videobuf_dmabuf *dma, int direction,
+ unsigned long data, unsigned long size)
+{
+ int ret;
+ down_read(&current->mm->mmap_sem);
+ ret = videobuf_dma_init_user_locked(dma, direction, data, size);
+ up_read(&current->mm->mmap_sem);
+
+ return ret;
+}
+
+int videobuf_dma_init_kernel(struct videobuf_dmabuf *dma, int direction,
+ int nr_pages)
+{
+ dprintk(1,"init kernel [%d pages]\n",nr_pages);
+ dma->direction = direction;
+ dma->vmalloc = vmalloc_32(nr_pages << PAGE_SHIFT);
+ if (NULL == dma->vmalloc) {
+ dprintk(1,"vmalloc_32(%d pages) failed\n",nr_pages);
+ return -ENOMEM;
+ }
+ dprintk(1,"vmalloc is at addr 0x%08lx, size=%d\n",
+ (unsigned long)dma->vmalloc,
+ nr_pages << PAGE_SHIFT);
+ memset(dma->vmalloc,0,nr_pages << PAGE_SHIFT);
+ dma->nr_pages = nr_pages;
+ return 0;
+}
+
+int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction,
+ dma_addr_t addr, int nr_pages)
+{
+ dprintk(1,"init overlay [%d pages @ bus 0x%lx]\n",
+ nr_pages,(unsigned long)addr);
+ dma->direction = direction;
+ if (0 == addr)
+ return -EINVAL;
+
+ dma->bus_addr = addr;
+ dma->nr_pages = nr_pages;
+ return 0;
+}
+
+int videobuf_dma_map(struct videobuf_queue* q,struct videobuf_dmabuf *dma)
+{
+ void *dev=q->dev;
+
+ MAGIC_CHECK(dma->magic,MAGIC_DMABUF);
+ BUG_ON(0 == dma->nr_pages);
+
+ if (dma->pages) {
+ dma->sglist = videobuf_pages_to_sg(dma->pages, dma->nr_pages,
+ dma->offset);
+ }
+ if (dma->vmalloc) {
+ dma->sglist = videobuf_vmalloc_to_sg
+ (dma->vmalloc,dma->nr_pages);
+ }
+ if (dma->bus_addr) {
+ dma->sglist = kmalloc(sizeof(struct scatterlist), GFP_KERNEL);
+ if (NULL != dma->sglist) {
+ dma->sglen = 1;
+ sg_dma_address(&dma->sglist[0]) = dma->bus_addr & PAGE_MASK;
+ dma->sglist[0].offset = dma->bus_addr & ~PAGE_MASK;
+ sg_dma_len(&dma->sglist[0]) = dma->nr_pages * PAGE_SIZE;
+ }
+ }
+ if (NULL == dma->sglist) {
+ dprintk(1,"scatterlist is NULL\n");
+ return -ENOMEM;
+ }
+ if (!dma->bus_addr) {
+ dma->sglen = pci_map_sg(dev,dma->sglist,
+ dma->nr_pages, dma->direction);
+ if (0 == dma->sglen) {
+ printk(KERN_WARNING
+ "%s: videobuf_map_sg failed\n",__FUNCTION__);
+ kfree(dma->sglist);
+ dma->sglist = NULL;
+ dma->sglen = 0;
+ return -EIO;
+ }
+ }
+ return 0;
+}
+
+int videobuf_dma_sync(struct videobuf_queue *q,struct videobuf_dmabuf *dma)
+{
+ void *dev=q->dev;
+
+ MAGIC_CHECK(dma->magic,MAGIC_DMABUF);
+ BUG_ON(!dma->sglen);
+
+ pci_dma_sync_sg_for_cpu (dev,dma->sglist,dma->nr_pages,dma->direction);
+ return 0;
+}
+
+int videobuf_dma_unmap(struct videobuf_queue* q,struct videobuf_dmabuf *dma)
+{
+ void *dev=q->dev;
+
+ MAGIC_CHECK(dma->magic,MAGIC_DMABUF);
+ if (!dma->sglen)
+ return 0;
+
+ pci_unmap_sg (dev,dma->sglist,dma->nr_pages,dma->direction);
+
+ kfree(dma->sglist);
+ dma->sglist = NULL;
+ dma->sglen = 0;
+ return 0;
+}
+
+int videobuf_dma_free(struct videobuf_dmabuf *dma)
+{
+ MAGIC_CHECK(dma->magic,MAGIC_DMABUF);
+ BUG_ON(dma->sglen);
+
+ if (dma->pages) {
+ int i;
+ for (i=0; i < dma->nr_pages; i++)
+ page_cache_release(dma->pages[i]);
+ kfree(dma->pages);
+ dma->pages = NULL;
+ }
+
+ vfree(dma->vmalloc);
+ dma->vmalloc = NULL;
+ dma->varea = NULL;
+
+ if (dma->bus_addr) {
+ dma->bus_addr = 0;
+ }
+ dma->direction = PCI_DMA_NONE;
+ return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+int videobuf_pci_dma_map(struct pci_dev *pci,struct videobuf_dmabuf *dma)
+{
+ struct videobuf_queue q;
+
+ q.dev=pci;
+
+ return (videobuf_dma_map(&q,dma));
+}
+
+int videobuf_pci_dma_unmap(struct pci_dev *pci,struct videobuf_dmabuf *dma)
+{
+ struct videobuf_queue q;
+
+ q.dev=pci;
+
+ return (videobuf_dma_unmap(&q,dma));
+}
+
+/* --------------------------------------------------------------------- */
+
+static void
+videobuf_vm_open(struct vm_area_struct *vma)
+{
+ struct videobuf_mapping *map = vma->vm_private_data;
+
+ dprintk(2,"vm_open %p [count=%d,vma=%08lx-%08lx]\n",map,
+ map->count,vma->vm_start,vma->vm_end);
+ map->count++;
+}
+
+static void
+videobuf_vm_close(struct vm_area_struct *vma)
+{
+ struct videobuf_mapping *map = vma->vm_private_data;
+ struct videobuf_queue *q = map->q;
+ struct videbuf_pci_sg_memory *mem;
+ int i;
+
+ dprintk(2,"vm_close %p [count=%d,vma=%08lx-%08lx]\n",map,
+ map->count,vma->vm_start,vma->vm_end);
+
+ map->count--;
+ if (0 == map->count) {
+ dprintk(1,"munmap %p q=%p\n",map,q);
+ mutex_lock(&q->lock);
+ for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+ if (NULL == q->bufs[i])
+ continue;
+ mem=q->bufs[i]->priv;
+
+ if (!mem)
+ continue;
+
+ MAGIC_CHECK(mem->magic,MAGIC_SG_MEM);
+
+ if (q->bufs[i]->map != map)
+ continue;
+ q->bufs[i]->map = NULL;
+ q->bufs[i]->baddr = 0;
+ q->ops->buf_release(q,q->bufs[i]);
+ }
+ mutex_unlock(&q->lock);
+ kfree(map);
+ }
+ return;
+}
+
+/*
+ * Get a anonymous page for the mapping. Make sure we can DMA to that
+ * memory location with 32bit PCI devices (i.e. don't use highmem for
+ * now ...). Bounce buffers don't work very well for the data rates
+ * video capture has.
+ */
+static struct page*
+videobuf_vm_nopage(struct vm_area_struct *vma, unsigned long vaddr,
+ int *type)
+{
+ struct page *page;
+
+ dprintk(3,"nopage: fault @ %08lx [vma %08lx-%08lx]\n",
+ vaddr,vma->vm_start,vma->vm_end);
+ if (vaddr > vma->vm_end)
+ return NOPAGE_SIGBUS;
+ page = alloc_page(GFP_USER | __GFP_DMA32);
+ if (!page)
+ return NOPAGE_OOM;
+ clear_user_page(page_address(page), vaddr, page);
+ if (type)
+ *type = VM_FAULT_MINOR;
+ return page;
+}
+
+static struct vm_operations_struct videobuf_vm_ops =
+{
+ .open = videobuf_vm_open,
+ .close = videobuf_vm_close,
+ .nopage = videobuf_vm_nopage,
+};
+
+/* ---------------------------------------------------------------------
+ * PCI handlers for the generic methods
+ */
+
+/* Allocated area consists on 3 parts:
+ struct video_buffer
+ struct <driver>_buffer (cx88_buffer, saa7134_buf, ...)
+ struct videobuf_pci_sg_memory
+ */
+
+static void *__videobuf_alloc(size_t size)
+{
+ struct videbuf_pci_sg_memory *mem;
+ struct videobuf_buffer *vb;
+
+ vb = kzalloc(size+sizeof(*mem),GFP_KERNEL);
+
+ mem = vb->priv = ((char *)vb)+size;
+ mem->magic=MAGIC_SG_MEM;
+
+ videobuf_dma_init(&mem->dma);
+
+ dprintk(1,"%s: allocated at %p(%ld+%ld) & %p(%ld)\n",
+ __FUNCTION__,vb,(long)sizeof(*vb),(long)size-sizeof(*vb),
+ mem,(long)sizeof(*mem));
+
+ return vb;
+}
+
+static int __videobuf_iolock (struct videobuf_queue* q,
+ struct videobuf_buffer *vb,
+ struct v4l2_framebuffer *fbuf)
+{
+ int err,pages;
+ dma_addr_t bus;
+ struct videbuf_pci_sg_memory *mem=vb->priv;
+ BUG_ON(!mem);
+
+ MAGIC_CHECK(mem->magic,MAGIC_SG_MEM);
+
+ switch (vb->memory) {
+ case V4L2_MEMORY_MMAP:
+ case V4L2_MEMORY_USERPTR:
+ if (0 == vb->baddr) {
+ /* no userspace addr -- kernel bounce buffer */
+ pages = PAGE_ALIGN(vb->size) >> PAGE_SHIFT;
+ err = videobuf_dma_init_kernel( &mem->dma,
+ PCI_DMA_FROMDEVICE,
+ pages );
+ if (0 != err)
+ return err;
+ } else if (vb->memory == V4L2_MEMORY_USERPTR) {
+ /* dma directly to userspace */
+ err = videobuf_dma_init_user( &mem->dma,
+ PCI_DMA_FROMDEVICE,
+ vb->baddr,vb->bsize );
+ if (0 != err)
+ return err;
+ } else {
+ /* NOTE: HACK: videobuf_iolock on V4L2_MEMORY_MMAP
+ buffers can only be called from videobuf_qbuf
+ we take current->mm->mmap_sem there, to prevent
+ locking inversion, so don't take it here */
+
+ err = videobuf_dma_init_user_locked(&mem->dma,
+ PCI_DMA_FROMDEVICE,
+ vb->baddr, vb->bsize);
+ if (0 != err)
+ return err;
+ }
+ break;
+ case V4L2_MEMORY_OVERLAY:
+ if (NULL == fbuf)
+ return -EINVAL;
+ /* FIXME: need sanity checks for vb->boff */
+ /*
+ * Using a double cast to avoid compiler warnings when
+ * building for PAE. Compiler doesn't like direct casting
+ * of a 32 bit ptr to 64 bit integer.
+ */
+ bus = (dma_addr_t)(unsigned long)fbuf->base + vb->boff;
+ pages = PAGE_ALIGN(vb->size) >> PAGE_SHIFT;
+ err = videobuf_dma_init_overlay(&mem->dma,PCI_DMA_FROMDEVICE,
+ bus, pages);
+ if (0 != err)
+ return err;
+ break;
+ default:
+ BUG();
+ }
+ err = videobuf_dma_map(q,&mem->dma);
+ if (0 != err)
+ return err;
+
+ return 0;
+}
+
+static int __videobuf_sync(struct videobuf_queue *q,
+ struct videobuf_buffer *buf)
+{
+ struct videbuf_pci_sg_memory *mem=buf->priv;
+ BUG_ON (!mem);
+ MAGIC_CHECK(mem->magic,MAGIC_SG_MEM);
+
+ return videobuf_dma_sync(q,&mem->dma);
+}
+
+static int __videobuf_mmap_free(struct videobuf_queue *q)
+{
+ int i;
+
+ for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+ if (q->bufs[i]) {
+ if (q->bufs[i]->map)
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+static int __videobuf_mmap_mapper(struct videobuf_queue *q,
+ struct vm_area_struct *vma)
+{
+ struct videbuf_pci_sg_memory *mem;
+ struct videobuf_mapping *map;
+ unsigned int first,last,size,i;
+ int retval;
+
+ retval = -EINVAL;
+ if (!(vma->vm_flags & VM_WRITE)) {
+ dprintk(1,"mmap app bug: PROT_WRITE please\n");
+ goto done;
+ }
+ if (!(vma->vm_flags & VM_SHARED)) {
+ dprintk(1,"mmap app bug: MAP_SHARED please\n");
+ goto done;
+ }
+
+ /* look for first buffer to map */
+ for (first = 0; first < VIDEO_MAX_FRAME; first++) {
+ if (NULL == q->bufs[first])
+ continue;
+ mem=q->bufs[first]->priv;
+ BUG_ON (!mem);
+ MAGIC_CHECK(mem->magic,MAGIC_SG_MEM);
+
+ if (V4L2_MEMORY_MMAP != q->bufs[first]->memory)
+ continue;
+ if (q->bufs[first]->boff == (vma->vm_pgoff << PAGE_SHIFT))
+ break;
+ }
+ if (VIDEO_MAX_FRAME == first) {
+ dprintk(1,"mmap app bug: offset invalid [offset=0x%lx]\n",
+ (vma->vm_pgoff << PAGE_SHIFT));
+ goto done;
+ }
+
+ /* look for last buffer to map */
+ for (size = 0, last = first; last < VIDEO_MAX_FRAME; last++) {
+ if (NULL == q->bufs[last])
+ continue;
+ if (V4L2_MEMORY_MMAP != q->bufs[last]->memory)
+ continue;
+ if (q->bufs[last]->map) {
+ retval = -EBUSY;
+ goto done;
+ }
+ size += q->bufs[last]->bsize;
+ if (size == (vma->vm_end - vma->vm_start))
+ break;
+ }
+ if (VIDEO_MAX_FRAME == last) {
+ dprintk(1,"mmap app bug: size invalid [size=0x%lx]\n",
+ (vma->vm_end - vma->vm_start));
+ goto done;
+ }
+
+ /* create mapping + update buffer list */
+ retval = -ENOMEM;
+ map = kmalloc(sizeof(struct videobuf_mapping),GFP_KERNEL);
+ if (NULL == map)
+ goto done;
+ for (size = 0, i = first; i <= last; size += q->bufs[i++]->bsize) {
+ q->bufs[i]->map = map;
+ q->bufs[i]->baddr = vma->vm_start + size;
+ }
+ map->count = 1;
+ map->start = vma->vm_start;
+ map->end = vma->vm_end;
+ map->q = q;
+ vma->vm_ops = &videobuf_vm_ops;
+ vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED;
+ vma->vm_flags &= ~VM_IO; /* using shared anonymous pages */
+ vma->vm_private_data = map;
+ dprintk(1,"mmap %p: q=%p %08lx-%08lx pgoff %08lx bufs %d-%d\n",
+ map,q,vma->vm_start,vma->vm_end,vma->vm_pgoff,first,last);
+ retval = 0;
+
+ done:
+ return retval;
+}
+
+static int __videobuf_copy_to_user ( struct videobuf_queue *q,
+ char __user *data, size_t count,
+ int nonblocking )
+{
+ struct videbuf_pci_sg_memory *mem=q->read_buf->priv;
+ BUG_ON (!mem);
+ MAGIC_CHECK(mem->magic,MAGIC_SG_MEM);
+
+ /* copy to userspace */
+ if (count > q->read_buf->size - q->read_off)
+ count = q->read_buf->size - q->read_off;
+
+ if (copy_to_user(data, mem->dma.vmalloc+q->read_off, count))
+ return -EFAULT;
+
+ return count;
+}
+
+static int __videobuf_copy_stream ( struct videobuf_queue *q,
+ char __user *data, size_t count, size_t pos,
+ int vbihack, int nonblocking )
+{
+ unsigned int *fc;
+ struct videbuf_pci_sg_memory *mem=q->read_buf->priv;
+ BUG_ON (!mem);
+ MAGIC_CHECK(mem->magic,MAGIC_SG_MEM);
+
+ if (vbihack) {
+ /* dirty, undocumented hack -- pass the frame counter
+ * within the last four bytes of each vbi data block.
+ * We need that one to maintain backward compatibility
+ * to all vbi decoding software out there ... */
+ fc = (unsigned int*)mem->dma.vmalloc;
+ fc += (q->read_buf->size>>2) -1;
+ *fc = q->read_buf->field_count >> 1;
+ dprintk(1,"vbihack: %d\n",*fc);
+ }
+
+ /* copy stuff using the common method */
+ count = __videobuf_copy_to_user (q,data,count,nonblocking);
+
+ if ( (count==-EFAULT) && (0 == pos) )
+ return -EFAULT;
+
+ return count;
+}
+
+static struct videobuf_qtype_ops pci_ops = {
+ .magic = MAGIC_QTYPE_OPS,
+
+ .alloc = __videobuf_alloc,
+ .iolock = __videobuf_iolock,
+ .sync = __videobuf_sync,
+ .mmap_free = __videobuf_mmap_free,
+ .mmap_mapper = __videobuf_mmap_mapper,
+ .copy_to_user = __videobuf_copy_to_user,
+ .copy_stream = __videobuf_copy_stream,
+};
+
+void *videobuf_pci_alloc (size_t size)
+{
+ struct videobuf_queue q;
+
+ /* Required to make generic handler to call __videobuf_alloc */
+ q.int_ops=&pci_ops;
+
+ q.msize=size;
+
+ return videobuf_alloc (&q);
+}
+
+void videobuf_queue_pci_init(struct videobuf_queue* q,
+ struct videobuf_queue_ops *ops,
+ void *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv)
+{
+ videobuf_queue_core_init(q, ops, dev, irqlock, type, field, msize,
+ priv, &pci_ops);
+}
+
+/* --------------------------------------------------------------------- */
+
+EXPORT_SYMBOL_GPL(videobuf_vmalloc_to_sg);
+
+EXPORT_SYMBOL_GPL(videobuf_to_dma);
+EXPORT_SYMBOL_GPL(videobuf_dma_init);
+EXPORT_SYMBOL_GPL(videobuf_dma_init_user);
+EXPORT_SYMBOL_GPL(videobuf_dma_init_kernel);
+EXPORT_SYMBOL_GPL(videobuf_dma_init_overlay);
+EXPORT_SYMBOL_GPL(videobuf_dma_map);
+EXPORT_SYMBOL_GPL(videobuf_dma_sync);
+EXPORT_SYMBOL_GPL(videobuf_dma_unmap);
+EXPORT_SYMBOL_GPL(videobuf_dma_free);
+
+EXPORT_SYMBOL_GPL(videobuf_pci_dma_map);
+EXPORT_SYMBOL_GPL(videobuf_pci_dma_unmap);
+EXPORT_SYMBOL_GPL(videobuf_pci_alloc);
+
+EXPORT_SYMBOL_GPL(videobuf_queue_pci_init);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/video/videobuf-dvb.c b/drivers/media/video/videobuf-dvb.c
new file mode 100644
index 00000000000..880317e04a0
--- /dev/null
+++ b/drivers/media/video/videobuf-dvb.c
@@ -0,0 +1,256 @@
+/*
+ *
+ * some helper function for simple DVB cards which simply DMA the
+ * complete transport stream and let the computer sort everything else
+ * (i.e. we are using the software demux, ...). Also uses the
+ * video-buf to manage DMA buffers.
+ *
+ * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SUSE Labs]
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/kthread.h>
+#include <linux/file.h>
+#include <linux/freezer.h>
+
+#include <media/videobuf-dma-sg.h>
+#include <media/videobuf-dvb.h>
+
+/* ------------------------------------------------------------------ */
+
+MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
+MODULE_LICENSE("GPL");
+
+static unsigned int debug = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug,"enable debug messages");
+
+#define dprintk(fmt, arg...) if (debug) \
+ printk(KERN_DEBUG "%s/dvb: " fmt, dvb->name , ## arg)
+
+/* ------------------------------------------------------------------ */
+
+static int videobuf_dvb_thread(void *data)
+{
+ struct videobuf_dvb *dvb = data;
+ struct videobuf_buffer *buf;
+ unsigned long flags;
+ int err;
+ struct videobuf_dmabuf *dma;
+
+ dprintk("dvb thread started\n");
+ set_freezable();
+ videobuf_read_start(&dvb->dvbq);
+
+ for (;;) {
+ /* fetch next buffer */
+ buf = list_entry(dvb->dvbq.stream.next,
+ struct videobuf_buffer, stream);
+ list_del(&buf->stream);
+ err = videobuf_waiton(buf,0,1);
+
+ /* no more feeds left or stop_feed() asked us to quit */
+ if (0 == dvb->nfeeds)
+ break;
+ if (kthread_should_stop())
+ break;
+ try_to_freeze();
+
+ /* feed buffer data to demux */
+ dma=videobuf_to_dma(buf);
+ if (buf->state == STATE_DONE)
+ dvb_dmx_swfilter(&dvb->demux, dma->vmalloc,
+ buf->size);
+
+ /* requeue buffer */
+ list_add_tail(&buf->stream,&dvb->dvbq.stream);
+ spin_lock_irqsave(dvb->dvbq.irqlock,flags);
+ dvb->dvbq.ops->buf_queue(&dvb->dvbq,buf);
+ spin_unlock_irqrestore(dvb->dvbq.irqlock,flags);
+ }
+
+ videobuf_read_stop(&dvb->dvbq);
+ dprintk("dvb thread stopped\n");
+
+ /* Hmm, linux becomes *very* unhappy without this ... */
+ while (!kthread_should_stop()) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+ }
+ return 0;
+}
+
+static int videobuf_dvb_start_feed(struct dvb_demux_feed *feed)
+{
+ struct dvb_demux *demux = feed->demux;
+ struct videobuf_dvb *dvb = demux->priv;
+ int rc;
+
+ if (!demux->dmx.frontend)
+ return -EINVAL;
+
+ mutex_lock(&dvb->lock);
+ dvb->nfeeds++;
+ rc = dvb->nfeeds;
+
+ if (NULL != dvb->thread)
+ goto out;
+ dvb->thread = kthread_run(videobuf_dvb_thread,
+ dvb, "%s dvb", dvb->name);
+ if (IS_ERR(dvb->thread)) {
+ rc = PTR_ERR(dvb->thread);
+ dvb->thread = NULL;
+ }
+
+out:
+ mutex_unlock(&dvb->lock);
+ return rc;
+}
+
+static int videobuf_dvb_stop_feed(struct dvb_demux_feed *feed)
+{
+ struct dvb_demux *demux = feed->demux;
+ struct videobuf_dvb *dvb = demux->priv;
+ int err = 0;
+
+ mutex_lock(&dvb->lock);
+ dvb->nfeeds--;
+ if (0 == dvb->nfeeds && NULL != dvb->thread) {
+ // FIXME: cx8802_cancel_buffers(dev);
+ err = kthread_stop(dvb->thread);
+ dvb->thread = NULL;
+ }
+ mutex_unlock(&dvb->lock);
+ return err;
+}
+
+/* ------------------------------------------------------------------ */
+
+int videobuf_dvb_register(struct videobuf_dvb *dvb,
+ struct module *module,
+ void *adapter_priv,
+ struct device *device)
+{
+ int result;
+
+ mutex_init(&dvb->lock);
+
+ /* register adapter */
+ result = dvb_register_adapter(&dvb->adapter, dvb->name, module, device);
+ if (result < 0) {
+ printk(KERN_WARNING "%s: dvb_register_adapter failed (errno = %d)\n",
+ dvb->name, result);
+ goto fail_adapter;
+ }
+ dvb->adapter.priv = adapter_priv;
+
+ /* register frontend */
+ result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+ if (result < 0) {
+ printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n",
+ dvb->name, result);
+ goto fail_frontend;
+ }
+
+ /* register demux stuff */
+ dvb->demux.dmx.capabilities =
+ DMX_TS_FILTERING | DMX_SECTION_FILTERING |
+ DMX_MEMORY_BASED_FILTERING;
+ dvb->demux.priv = dvb;
+ dvb->demux.filternum = 256;
+ dvb->demux.feednum = 256;
+ dvb->demux.start_feed = videobuf_dvb_start_feed;
+ dvb->demux.stop_feed = videobuf_dvb_stop_feed;
+ result = dvb_dmx_init(&dvb->demux);
+ if (result < 0) {
+ printk(KERN_WARNING "%s: dvb_dmx_init failed (errno = %d)\n",
+ dvb->name, result);
+ goto fail_dmx;
+ }
+
+ dvb->dmxdev.filternum = 256;
+ dvb->dmxdev.demux = &dvb->demux.dmx;
+ dvb->dmxdev.capabilities = 0;
+ result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
+ if (result < 0) {
+ printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n",
+ dvb->name, result);
+ goto fail_dmxdev;
+ }
+
+ dvb->fe_hw.source = DMX_FRONTEND_0;
+ result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
+ if (result < 0) {
+ printk(KERN_WARNING "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
+ dvb->name, result);
+ goto fail_fe_hw;
+ }
+
+ dvb->fe_mem.source = DMX_MEMORY_FE;
+ result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
+ if (result < 0) {
+ printk(KERN_WARNING "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
+ dvb->name, result);
+ goto fail_fe_mem;
+ }
+
+ result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
+ if (result < 0) {
+ printk(KERN_WARNING "%s: connect_frontend failed (errno = %d)\n",
+ dvb->name, result);
+ goto fail_fe_conn;
+ }
+
+ /* register network adapter */
+ dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
+ return 0;
+
+fail_fe_conn:
+ dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
+fail_fe_mem:
+ dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
+fail_fe_hw:
+ dvb_dmxdev_release(&dvb->dmxdev);
+fail_dmxdev:
+ dvb_dmx_release(&dvb->demux);
+fail_dmx:
+ dvb_unregister_frontend(dvb->frontend);
+fail_frontend:
+ dvb_frontend_detach(dvb->frontend);
+ dvb_unregister_adapter(&dvb->adapter);
+fail_adapter:
+ return result;
+}
+
+void videobuf_dvb_unregister(struct videobuf_dvb *dvb)
+{
+ dvb_net_release(&dvb->net);
+ dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
+ dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
+ dvb_dmxdev_release(&dvb->dmxdev);
+ dvb_dmx_release(&dvb->demux);
+ dvb_unregister_frontend(dvb->frontend);
+ dvb_frontend_detach(dvb->frontend);
+ dvb_unregister_adapter(&dvb->adapter);
+}
+
+EXPORT_SYMBOL(videobuf_dvb_register);
+EXPORT_SYMBOL(videobuf_dvb_unregister);
+
+/* ------------------------------------------------------------------ */
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * compile-command: "make DVB=1"
+ * End:
+ */
+
diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c
new file mode 100644
index 00000000000..2e3689a12a2
--- /dev/null
+++ b/drivers/media/video/videobuf-vmalloc.c
@@ -0,0 +1,370 @@
+/*
+ * helper functions for vmalloc video4linux capture buffers
+ *
+ * The functions expect the hardware being able to scatter gatter
+ * (i.e. the buffers are not linear in physical memory, but fragmented
+ * into PAGE_SIZE chunks). They also assume the driver does not need
+ * to touch the video data.
+ *
+ * (c) 2007 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+#include <media/videobuf-vmalloc.h>
+
+#define MAGIC_DMABUF 0x17760309
+#define MAGIC_VMAL_MEM 0x18221223
+
+#define MAGIC_CHECK(is,should) if (unlikely((is) != (should))) \
+ { printk(KERN_ERR "magic mismatch: %x (expected %x)\n",is,should); BUG(); }
+
+static int debug = 0;
+module_param(debug, int, 0644);
+
+MODULE_DESCRIPTION("helper module to manage video4linux vmalloc buffers");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
+MODULE_LICENSE("GPL");
+
+#define dprintk(level, fmt, arg...) if (debug >= level) \
+ printk(KERN_DEBUG "vbuf-sg: " fmt , ## arg)
+
+
+/***************************************************************************/
+
+static void
+videobuf_vm_open(struct vm_area_struct *vma)
+{
+ struct videobuf_mapping *map = vma->vm_private_data;
+
+ dprintk(2,"vm_open %p [count=%d,vma=%08lx-%08lx]\n",map,
+ map->count,vma->vm_start,vma->vm_end);
+
+ map->count++;
+}
+
+static void
+videobuf_vm_close(struct vm_area_struct *vma)
+{
+ struct videobuf_mapping *map = vma->vm_private_data;
+ struct videobuf_queue *q = map->q;
+ int i;
+
+ dprintk(2,"vm_close %p [count=%d,vma=%08lx-%08lx]\n",map,
+ map->count,vma->vm_start,vma->vm_end);
+
+ map->count--;
+ if (0 == map->count) {
+ dprintk(1,"munmap %p q=%p\n",map,q);
+ mutex_lock(&q->lock);
+ for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+ if (NULL == q->bufs[i])
+ continue;
+
+ if (q->bufs[i]->map != map)
+ continue;
+
+ q->ops->buf_release(q,q->bufs[i]);
+
+ q->bufs[i]->map = NULL;
+ q->bufs[i]->baddr = 0;
+ }
+ mutex_unlock(&q->lock);
+ kfree(map);
+ }
+ return;
+}
+
+static struct vm_operations_struct videobuf_vm_ops =
+{
+ .open = videobuf_vm_open,
+ .close = videobuf_vm_close,
+};
+
+/* ---------------------------------------------------------------------
+ * vmalloc handlers for the generic methods
+ */
+
+/* Allocated area consists on 3 parts:
+ struct video_buffer
+ struct <driver>_buffer (cx88_buffer, saa7134_buf, ...)
+ struct videobuf_pci_sg_memory
+ */
+
+static void *__videobuf_alloc(size_t size)
+{
+ struct videbuf_vmalloc_memory *mem;
+ struct videobuf_buffer *vb;
+
+ vb = kzalloc(size+sizeof(*mem),GFP_KERNEL);
+
+ mem = vb->priv = ((char *)vb)+size;
+ mem->magic=MAGIC_VMAL_MEM;
+
+ dprintk(1,"%s: allocated at %p(%ld+%ld) & %p(%ld)\n",
+ __FUNCTION__,vb,(long)sizeof(*vb),(long)size-sizeof(*vb),
+ mem,(long)sizeof(*mem));
+
+ return vb;
+}
+
+static int __videobuf_iolock (struct videobuf_queue* q,
+ struct videobuf_buffer *vb,
+ struct v4l2_framebuffer *fbuf)
+{
+ int pages;
+
+ struct videbuf_vmalloc_memory *mem=vb->priv;
+
+
+ BUG_ON(!mem);
+
+ MAGIC_CHECK(mem->magic,MAGIC_VMAL_MEM);
+
+ pages = PAGE_ALIGN(vb->size) >> PAGE_SHIFT;
+
+ /* Currently, doesn't support V4L2_MEMORY_OVERLAY */
+ if ((vb->memory != V4L2_MEMORY_MMAP) &&
+ (vb->memory != V4L2_MEMORY_USERPTR) ) {
+ printk(KERN_ERR "Method currently unsupported.\n");
+ return -EINVAL;
+ }
+
+ /* FIXME: should be tested with kernel mmap mem */
+ mem->vmalloc=vmalloc_user (PAGE_ALIGN(vb->size));
+ if (NULL == mem->vmalloc) {
+ printk(KERN_ERR "vmalloc (%d pages) failed\n",pages);
+ return -ENOMEM;
+ }
+
+ dprintk(1,"vmalloc is at addr 0x%08lx, size=%d\n",
+ (unsigned long)mem->vmalloc,
+ pages << PAGE_SHIFT);
+
+ /* It seems that some kernel versions need to do remap *after*
+ the mmap() call
+ */
+ if (mem->vma) {
+ int retval=remap_vmalloc_range(mem->vma, mem->vmalloc,0);
+ kfree(mem->vma);
+ mem->vma=NULL;
+ if (retval<0) {
+ dprintk(1,"mmap app bug: remap_vmalloc_range area %p error %d\n",
+ mem->vmalloc,retval);
+ return retval;
+ }
+ }
+
+ return 0;
+}
+
+static int __videobuf_sync(struct videobuf_queue *q,
+ struct videobuf_buffer *buf)
+{
+ return 0;
+}
+
+static int __videobuf_mmap_free(struct videobuf_queue *q)
+{
+ unsigned int i;
+
+ for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+ if (q->bufs[i]) {
+ if (q->bufs[i]->map)
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+static int __videobuf_mmap_mapper(struct videobuf_queue *q,
+ struct vm_area_struct *vma)
+{
+ struct videbuf_vmalloc_memory *mem;
+ struct videobuf_mapping *map;
+ unsigned int first;
+ int retval;
+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+
+ if (! (vma->vm_flags & VM_WRITE) || ! (vma->vm_flags & VM_SHARED))
+ return -EINVAL;
+
+ /* look for first buffer to map */
+ for (first = 0; first < VIDEO_MAX_FRAME; first++) {
+ if (NULL == q->bufs[first])
+ continue;
+
+ if (V4L2_MEMORY_MMAP != q->bufs[first]->memory)
+ continue;
+ if (q->bufs[first]->boff == offset)
+ break;
+ }
+ if (VIDEO_MAX_FRAME == first) {
+ dprintk(1,"mmap app bug: offset invalid [offset=0x%lx]\n",
+ (vma->vm_pgoff << PAGE_SHIFT));
+ return -EINVAL;
+ }
+
+ /* create mapping + update buffer list */
+ map = q->bufs[first]->map = kmalloc(sizeof(struct videobuf_mapping),GFP_KERNEL);
+ if (NULL == map)
+ return -ENOMEM;
+
+ map->start = vma->vm_start;
+ map->end = vma->vm_end;
+ map->q = q;
+
+ q->bufs[first]->baddr = vma->vm_start;
+
+ vma->vm_ops = &videobuf_vm_ops;
+ vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED;
+ vma->vm_private_data = map;
+
+ mem=q->bufs[first]->priv;
+ BUG_ON (!mem);
+ MAGIC_CHECK(mem->magic,MAGIC_VMAL_MEM);
+
+ /* Try to remap memory */
+ retval=remap_vmalloc_range(vma, mem->vmalloc,0);
+ if (retval<0) {
+ dprintk(1,"mmap: postponing remap_vmalloc_range\n");
+
+ mem->vma=kmalloc(sizeof(*vma),GFP_KERNEL);
+ if (!mem->vma) {
+ kfree(map);
+ q->bufs[first]->map=NULL;
+ return -ENOMEM;
+ }
+ memcpy(mem->vma,vma,sizeof(*vma));
+ }
+
+ dprintk(1,"mmap %p: q=%p %08lx-%08lx (%lx) pgoff %08lx buf %d\n",
+ map,q,vma->vm_start,vma->vm_end,
+ (long int) q->bufs[first]->bsize,
+ vma->vm_pgoff,first);
+
+ videobuf_vm_open(vma);
+
+ return (0);
+}
+
+static int __videobuf_copy_to_user ( struct videobuf_queue *q,
+ char __user *data, size_t count,
+ int nonblocking )
+{
+ struct videbuf_vmalloc_memory *mem=q->read_buf->priv;
+ BUG_ON (!mem);
+ MAGIC_CHECK(mem->magic,MAGIC_VMAL_MEM);
+
+ BUG_ON (!mem->vmalloc);
+
+ /* copy to userspace */
+ if (count > q->read_buf->size - q->read_off)
+ count = q->read_buf->size - q->read_off;
+
+ if (copy_to_user(data, mem->vmalloc+q->read_off, count))
+ return -EFAULT;
+
+ return count;
+}
+
+static int __videobuf_copy_stream ( struct videobuf_queue *q,
+ char __user *data, size_t count, size_t pos,
+ int vbihack, int nonblocking )
+{
+ unsigned int *fc;
+ struct videbuf_vmalloc_memory *mem=q->read_buf->priv;
+ BUG_ON (!mem);
+ MAGIC_CHECK(mem->magic,MAGIC_VMAL_MEM);
+
+ if (vbihack) {
+ /* dirty, undocumented hack -- pass the frame counter
+ * within the last four bytes of each vbi data block.
+ * We need that one to maintain backward compatibility
+ * to all vbi decoding software out there ... */
+ fc = (unsigned int*)mem->vmalloc;
+ fc += (q->read_buf->size>>2) -1;
+ *fc = q->read_buf->field_count >> 1;
+ dprintk(1,"vbihack: %d\n",*fc);
+ }
+
+ /* copy stuff using the common method */
+ count = __videobuf_copy_to_user (q,data,count,nonblocking);
+
+ if ( (count==-EFAULT) && (0 == pos) )
+ return -EFAULT;
+
+ return count;
+}
+
+static struct videobuf_qtype_ops qops = {
+ .magic = MAGIC_QTYPE_OPS,
+
+ .alloc = __videobuf_alloc,
+ .iolock = __videobuf_iolock,
+ .sync = __videobuf_sync,
+ .mmap_free = __videobuf_mmap_free,
+ .mmap_mapper = __videobuf_mmap_mapper,
+ .copy_to_user = __videobuf_copy_to_user,
+ .copy_stream = __videobuf_copy_stream,
+};
+
+void videobuf_queue_vmalloc_init(struct videobuf_queue* q,
+ struct videobuf_queue_ops *ops,
+ void *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv)
+{
+ videobuf_queue_core_init(q, ops, dev, irqlock, type, field, msize,
+ priv, &qops);
+}
+
+EXPORT_SYMBOL_GPL(videobuf_queue_vmalloc_init);
+
+void *videobuf_to_vmalloc (struct videobuf_buffer *buf)
+{
+ struct videbuf_vmalloc_memory *mem=buf->priv;
+ BUG_ON (!mem);
+ MAGIC_CHECK(mem->magic,MAGIC_VMAL_MEM);
+
+ return mem->vmalloc;
+}
+EXPORT_SYMBOL_GPL(videobuf_to_vmalloc);
+
+void videobuf_vmalloc_free (struct videobuf_buffer *buf)
+{
+ struct videbuf_vmalloc_memory *mem=buf->priv;
+ BUG_ON (!mem);
+
+ MAGIC_CHECK(mem->magic,MAGIC_VMAL_MEM);
+
+ vfree(mem->vmalloc);
+ mem->vmalloc=NULL;
+
+ return;
+}
+EXPORT_SYMBOL_GPL(videobuf_vmalloc_free);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c
index b876aca69c7..8d8e517b344 100644
--- a/drivers/media/video/videodev.c
+++ b/drivers/media/video/videodev.c
@@ -54,15 +54,14 @@
* sysfs stuff
*/
-static ssize_t show_name(struct class_device *cd, char *buf)
+static ssize_t show_name(struct device *cd,
+ struct device_attribute *attr, char *buf)
{
struct video_device *vfd = container_of(cd, struct video_device,
- class_dev);
- return sprintf(buf,"%.*s\n",(int)sizeof(vfd->name),vfd->name);
+ class_dev);
+ return sprintf(buf, "%.*s\n", (int)sizeof(vfd->name), vfd->name);
}
-static CLASS_DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-
struct video_device *video_device_alloc(void)
{
struct video_device *vfd;
@@ -76,7 +75,7 @@ void video_device_release(struct video_device *vfd)
kfree(vfd);
}
-static void video_release(struct class_device *cd)
+static void video_release(struct device *cd)
{
struct video_device *vfd = container_of(cd, struct video_device,
class_dev);
@@ -89,9 +88,15 @@ static void video_release(struct class_device *cd)
vfd->release(vfd);
}
+static struct device_attribute video_device_attrs[] = {
+ __ATTR(name, S_IRUGO, show_name, NULL),
+ __ATTR_NULL
+};
+
static struct class video_class = {
.name = VIDEO_NAME,
- .release = video_release,
+ .dev_attrs = video_device_attrs,
+ .dev_release = video_release,
};
/*
@@ -448,7 +453,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file,
if (cmd == VIDIOCGMBUF) {
struct video_mbuf *p=arg;
- memset(p,0,sizeof(p));
+ memset(p, 0, sizeof(*p));
if (!vfd->vidiocgmbuf)
return ret;
@@ -1753,22 +1758,16 @@ int video_register_device(struct video_device *vfd, int type, int nr)
/* sysfs class */
memset(&vfd->class_dev, 0x00, sizeof(vfd->class_dev));
if (vfd->dev)
- vfd->class_dev.dev = vfd->dev;
+ vfd->class_dev.parent = vfd->dev;
vfd->class_dev.class = &video_class;
vfd->class_dev.devt = MKDEV(VIDEO_MAJOR, vfd->minor);
- sprintf(vfd->class_dev.class_id, "%s%d", name_base, i - base);
- ret = class_device_register(&vfd->class_dev);
+ sprintf(vfd->class_dev.bus_id, "%s%d", name_base, i - base);
+ ret = device_register(&vfd->class_dev);
if (ret < 0) {
- printk(KERN_ERR "%s: class_device_register failed\n",
+ printk(KERN_ERR "%s: device_register failed\n",
__FUNCTION__);
goto fail_minor;
}
- ret = class_device_create_file(&vfd->class_dev, &class_device_attr_name);
- if (ret < 0) {
- printk(KERN_ERR "%s: class_device_create_file 'name' failed\n",
- __FUNCTION__);
- goto fail_classdev;
- }
#if 1
/* needed until all drivers are fixed */
@@ -1779,8 +1778,6 @@ int video_register_device(struct video_device *vfd, int type, int nr)
#endif
return 0;
-fail_classdev:
- class_device_unregister(&vfd->class_dev);
fail_minor:
mutex_lock(&videodev_lock);
video_device[vfd->minor] = NULL;
@@ -1804,7 +1801,7 @@ void video_unregister_device(struct video_device *vfd)
panic("videodev: bad unregister");
video_device[vfd->minor]=NULL;
- class_device_unregister(&vfd->class_dev);
+ device_unregister(&vfd->class_dev);
mutex_unlock(&videodev_lock);
}
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index a0c1647a2ba..9a03dc82c6c 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -28,7 +28,6 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mm.h>
-#include <linux/moduleparam.h>
#include <linux/time.h>
#include <linux/version.h>
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index f6d3a9460cc..b532aa280a1 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -33,7 +33,7 @@
#include <linux/videodev.h>
#endif
#include <linux/interrupt.h>
-#include <media/video-buf.h>
+#include <media/videobuf-vmalloc.h>
#include <media/v4l2-common.h>
#include <linux/kthread.h>
#include <linux/highmem.h>
@@ -145,7 +145,6 @@ struct vivi_buffer {
struct videobuf_buffer vb;
struct vivi_fmt *fmt;
-
};
struct vivi_dmaqueue {
@@ -171,7 +170,6 @@ struct vivi_dev {
int users;
/* various device info */
- unsigned int resources;
struct video_device vfd;
struct vivi_dmaqueue vidq;
@@ -230,9 +228,8 @@ static u8 bars[8][3] = {
#define TSTAMP_MAX_Y TSTAMP_MIN_Y+15
#define TSTAMP_MIN_X 64
-
static void gen_line(char *basep,int inipos,int wmax,
- int hmax, int line, char *timestr)
+ int hmax, int line, int count, char *timestr)
{
int w,i,j,pos=inipos,y;
char *p,*s;
@@ -243,9 +240,10 @@ static void gen_line(char *basep,int inipos,int wmax,
/* Generate a standard color bar pattern */
for (w=0;w<wmax;w++) {
- r=bars[w*7/wmax][0];
- g=bars[w*7/wmax][1];
- b=bars[w*7/wmax][2];
+ int colorpos=((w+count)*8/(wmax+1)) % 8;
+ r=bars[colorpos][0];
+ g=bars[colorpos][1];
+ b=bars[colorpos][2];
for (color=0;color<4;color++) {
p=basep+pos;
@@ -326,27 +324,27 @@ static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf)
int hmax = buf->vb.height;
int wmax = buf->vb.width;
struct timeval ts;
- char *tmpbuf;
-
- if (buf->vb.dma.varea) {
- tmpbuf=kmalloc (wmax*2, GFP_KERNEL);
- } else {
- tmpbuf=buf->vb.dma.vmalloc;
- }
+ char *tmpbuf = kmalloc(wmax*2,GFP_KERNEL);
+ void *vbuf=videobuf_to_vmalloc (&buf->vb);
+ /* FIXME: move to dev struct */
+ static int mv_count=0;
+ if (!tmpbuf)
+ return;
for (h=0;h<hmax;h++) {
- if (buf->vb.dma.varea) {
- gen_line(tmpbuf,0,wmax,hmax,h,dev->timestr);
- /* FIXME: replacing to __copy_to_user */
- if (copy_to_user(buf->vb.dma.varea+pos,tmpbuf,wmax*2)!=0)
- dprintk(2,"vivifill copy_to_user failed.\n");
- } else {
- gen_line(tmpbuf,pos,wmax,hmax,h,dev->timestr);
- }
+ gen_line(tmpbuf,0,wmax,hmax,h,mv_count,
+ dev->timestr);
+ /* FIXME: replacing to __copy_to_user */
+ if (copy_to_user(vbuf+pos,tmpbuf,wmax*2)!=0)
+ dprintk(2,"vivifill copy_to_user failed.\n");
pos += wmax*2;
}
+ mv_count++;
+
+ kfree(tmpbuf);
+
/* Updates stream time */
dev->us+=jiffies_to_usecs(jiffies-dev->jiffies);
@@ -369,7 +367,7 @@ static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf)
dev->h,dev->m,dev->s,(dev->us+500)/1000);
dprintk(2,"vivifill at %s: Buffer 0x%08lx size= %d\n",dev->timestr,
- (unsigned long)buf->vb.dma.varea,pos);
+ (unsigned long)tmpbuf,pos);
/* Advice that buffer was filled */
buf->vb.state = STATE_DONE;
@@ -509,7 +507,6 @@ static void vivi_stop_thread(struct vivi_dmaqueue *dma_q)
static int restart_video_queue(struct vivi_dmaqueue *dma_q)
{
struct vivi_buffer *buf, *prev;
- struct list_head *item;
dprintk(1,"%s dma_q=0x%08lx\n",__FUNCTION__,(unsigned long)dma_q);
@@ -523,9 +520,7 @@ static int restart_video_queue(struct vivi_dmaqueue *dma_q)
// vivi_start_thread(dma_q);
/* cancel all outstanding capture / vbi requests */
- list_for_each(item,&dma_q->active) {
- buf = list_entry(item, struct vivi_buffer, vb.queue);
-
+ list_for_each_entry_safe(buf, prev, &dma_q->active, vb.queue) {
list_del(&buf->vb.queue);
buf->vb.state = STATE_ERROR;
wake_up(&buf->vb.done);
@@ -597,8 +592,12 @@ buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
if (0 == *count)
*count = 32;
+
while (*size * *count > vid_limit * 1024 * 1024)
(*count)--;
+
+ dprintk(1,"%s, count=%d, size=%d\n",__FUNCTION__,*count, *size);
+
return 0;
}
@@ -609,10 +608,8 @@ static void free_buffer(struct videobuf_queue *vq, struct vivi_buffer *buf)
if (in_interrupt())
BUG();
-
videobuf_waiton(&buf->vb,0,0);
- videobuf_dma_unmap(vq, &buf->vb.dma);
- videobuf_dma_free(&buf->vb.dma);
+ videobuf_vmalloc_free(&buf->vb);
buf->vb.state = STATE_NEEDS_INIT;
}
@@ -626,7 +623,7 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
struct vivi_buffer *buf = container_of(vb,struct vivi_buffer,vb);
int rc, init_buffer = 0;
-// dprintk(1,"%s, field=%d\n",__FUNCTION__,field);
+ dprintk(1,"%s, field=%d\n",__FUNCTION__,field);
BUG_ON(NULL == fh->fmt);
if (fh->width < 48 || fh->width > norm_maxw() ||
@@ -718,54 +715,14 @@ static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb
free_buffer(vq,buf);
}
-
static struct videobuf_queue_ops vivi_video_qops = {
.buf_setup = buffer_setup,
.buf_prepare = buffer_prepare,
.buf_queue = buffer_queue,
.buf_release = buffer_release,
-
- /* Non-pci handling routines */
-// .vb_map_sg = vivi_map_sg,
-// .vb_dma_sync_sg = vivi_dma_sync_sg,
-// .vb_unmap_sg = vivi_unmap_sg,
};
/* ------------------------------------------------------------------
- IOCTL handling
- ------------------------------------------------------------------*/
-
-
-static int res_get(struct vivi_dev *dev, struct vivi_fh *fh)
-{
- /* is it free? */
- mutex_lock(&dev->lock);
- if (dev->resources) {
- /* no, someone else uses it */
- mutex_unlock(&dev->lock);
- return 0;
- }
- /* it's free, grab it */
- dev->resources =1;
- dprintk(1,"res: get\n");
- mutex_unlock(&dev->lock);
- return 1;
-}
-
-static int res_locked(struct vivi_dev *dev)
-{
- return (dev->resources);
-}
-
-static void res_free(struct vivi_dev *dev, struct vivi_fh *fh)
-{
- mutex_lock(&dev->lock);
- dev->resources = 0;
- dprintk(1,"res: put\n");
- mutex_lock(&dev->lock);
-}
-
-/* ------------------------------------------------------------------
IOCTL vidioc handling
------------------------------------------------------------------*/
static int vidioc_querycap (struct file *file, void *priv,
@@ -825,8 +782,7 @@ static int vidioc_try_fmt_cap (struct file *file, void *priv,
field = f->fmt.pix.field;
if (field == V4L2_FIELD_ANY) {
-// field=V4L2_FIELD_INTERLACED;
- field=V4L2_FIELD_SEQ_TB;
+ field=V4L2_FIELD_INTERLACED;
} else if (V4L2_FIELD_INTERLACED != field) {
dprintk(1,"Field type invalid.\n");
return -EINVAL;
@@ -904,57 +860,33 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p)
static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf)
{
struct vivi_fh *fh=priv;
- struct videobuf_queue *q=&fh->vb_vidq;
- struct v4l2_requestbuffers req;
- unsigned int i;
- int ret;
-
- req.type = q->type;
- req.count = 8;
- req.memory = V4L2_MEMORY_MMAP;
- ret = videobuf_reqbufs(q,&req);
- if (ret < 0)
- return (ret);
- mbuf->frames = req.count;
- mbuf->size = 0;
- for (i = 0; i < mbuf->frames; i++) {
- mbuf->offsets[i] = q->bufs[i]->boff;
- mbuf->size += q->bufs[i]->bsize;
- }
- return (0);
+ return videobuf_cgmbuf (&fh->vb_vidq, mbuf, 8);
}
#endif
static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
{
struct vivi_fh *fh=priv;
- struct vivi_dev *dev = fh->dev;
if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
if (i != fh->type)
return -EINVAL;
- if (!res_get(dev,fh))
- return -EBUSY;
- return (videobuf_streamon(&fh->vb_vidq));
+ return videobuf_streamon(&fh->vb_vidq);
}
static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
{
struct vivi_fh *fh=priv;
- struct vivi_dev *dev = fh->dev;
if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
if (i != fh->type)
return -EINVAL;
- videobuf_streamoff(&fh->vb_vidq);
- res_free(dev,fh);
-
- return (0);
+ return videobuf_streamoff(&fh->vb_vidq);
}
static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *i)
@@ -1047,31 +979,25 @@ static int vidioc_s_ctrl (struct file *file, void *priv,
static int vivi_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
- struct vivi_dev *h,*dev = NULL;
+ struct vivi_dev *dev;
struct vivi_fh *fh;
- struct list_head *list;
- enum v4l2_buf_type type = 0;
int i;
printk(KERN_DEBUG "vivi: open called (minor=%d)\n",minor);
- list_for_each(list,&vivi_devlist) {
- h = list_entry(list, struct vivi_dev, vivi_devlist);
- if (h->vfd.minor == minor) {
- dev = h;
- type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- }
- }
- if (NULL == dev)
- return -ENODEV;
+ list_for_each_entry(dev, &vivi_devlist, vivi_devlist)
+ if (dev->vfd.minor == minor)
+ goto found;
+ return -ENODEV;
+found:
/* If more than one user, mutex should be added */
dev->users++;
- dprintk(1,"open minor=%d type=%s users=%d\n",
- minor,v4l2_type_names[type],dev->users);
+ dprintk(1, "open minor=%d type=%s users=%d\n", minor,
+ v4l2_type_names[V4L2_BUF_TYPE_VIDEO_CAPTURE], dev->users);
/* allocate + initialize per filehandle data */
fh = kzalloc(sizeof(*fh),GFP_KERNEL);
@@ -1106,7 +1032,7 @@ static int vivi_open(struct inode *inode, struct file *file)
sprintf(dev->timestr,"%02d:%02d:%02d:%03d",
dev->h,dev->m,dev->s,(dev->us+500)/1000);
- videobuf_queue_init(&fh->vb_vidq, &vivi_video_qops,
+ videobuf_queue_vmalloc_init(&fh->vb_vidq, &vivi_video_qops,
NULL, NULL,
fh->type,
V4L2_FIELD_INTERLACED,
@@ -1121,9 +1047,7 @@ vivi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
struct vivi_fh *fh = file->private_data;
if (fh->type==V4L2_BUF_TYPE_VIDEO_CAPTURE) {
- if (res_locked(fh->dev))
- return -EBUSY;
- return videobuf_read_one(&fh->vb_vidq, data, count, ppos,
+ return videobuf_read_stream(&fh->vb_vidq, data, count, ppos, 0,
file->f_flags & O_NONBLOCK);
}
return 0;
@@ -1133,31 +1057,14 @@ static unsigned int
vivi_poll(struct file *file, struct poll_table_struct *wait)
{
struct vivi_fh *fh = file->private_data;
- struct vivi_buffer *buf;
+ struct videobuf_queue *q = &fh->vb_vidq;
dprintk(1,"%s\n",__FUNCTION__);
if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
return POLLERR;
- if (res_get(fh->dev,fh)) {
- dprintk(1,"poll: mmap interface\n");
- /* streaming capture */
- if (list_empty(&fh->vb_vidq.stream))
- return POLLERR;
- buf = list_entry(fh->vb_vidq.stream.next,struct vivi_buffer,vb.stream);
- } else {
- dprintk(1,"poll: read() interface\n");
- /* read() capture */
- buf = (struct vivi_buffer*)fh->vb_vidq.read_buf;
- if (NULL == buf)
- return POLLERR;
- }
- poll_wait(file, &buf->vb.done, wait);
- if (buf->vb.state == STATE_DONE ||
- buf->vb.state == STATE_ERROR)
- return POLLIN|POLLRDNORM;
- return 0;
+ return videobuf_poll_stream(file, q, wait);
}
static int vivi_release(struct inode *inode, struct file *file)
@@ -1205,7 +1112,7 @@ static const struct file_operations vivi_fops = {
.read = vivi_read,
.poll = vivi_poll,
.ioctl = video_ioctl2, /* V4L2 ioctl handler */
- .mmap = vivi_mmap,
+ .mmap = vivi_mmap,
.llseek = no_llseek,
};
diff --git a/drivers/media/video/vp27smpx.c b/drivers/media/video/vp27smpx.c
new file mode 100644
index 00000000000..63002e0ac76
--- /dev/null
+++ b/drivers/media/video/vp27smpx.c
@@ -0,0 +1,212 @@
+/*
+ * vp27smpx - driver version 0.0.1
+ *
+ * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * Based on a tvaudio patch from Takahiro Adachi <tadachi@tadachi-net.com>
+ * and Kazuhiko Kawakami <kazz-0@mail.goo.ne.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <asm/uaccess.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/videodev.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-chip-ident.h>
+
+MODULE_DESCRIPTION("vp27smpx driver");
+MODULE_AUTHOR("Hans Verkuil");
+MODULE_LICENSE("GPL");
+
+static unsigned short normal_i2c[] = { 0xb6 >> 1, I2C_CLIENT_END };
+
+
+I2C_CLIENT_INSMOD;
+
+/* ----------------------------------------------------------------------- */
+
+struct vp27smpx_state {
+ int radio;
+ u32 audmode;
+};
+
+static void vp27smpx_set_audmode(struct i2c_client *client, u32 audmode)
+{
+ struct vp27smpx_state *state = i2c_get_clientdata(client);
+ u8 data[3] = { 0x00, 0x00, 0x04 };
+
+ switch (audmode) {
+ case V4L2_TUNER_MODE_MONO:
+ case V4L2_TUNER_MODE_LANG1:
+ break;
+ case V4L2_TUNER_MODE_STEREO:
+ case V4L2_TUNER_MODE_LANG1_LANG2:
+ data[1] = 0x01;
+ break;
+ case V4L2_TUNER_MODE_LANG2:
+ data[1] = 0x02;
+ break;
+ }
+
+ if (i2c_master_send(client, data, sizeof(data)) != sizeof(data)) {
+ v4l_err(client, "%s: I/O error setting audmode\n", client->name);
+ }
+ else {
+ state->audmode = audmode;
+ }
+}
+
+static int vp27smpx_command(struct i2c_client *client, unsigned int cmd,
+ void *arg)
+{
+ struct vp27smpx_state *state = i2c_get_clientdata(client);
+ struct v4l2_tuner *vt = arg;
+
+ switch (cmd) {
+ case AUDC_SET_RADIO:
+ state->radio = 1;
+ break;
+
+ case VIDIOC_S_STD:
+ state->radio = 0;
+ break;
+
+ case VIDIOC_S_TUNER:
+ if (!state->radio)
+ vp27smpx_set_audmode(client, vt->audmode);
+ break;
+
+ case VIDIOC_G_TUNER:
+ if (state->radio)
+ break;
+ vt->audmode = state->audmode;
+ vt->capability = V4L2_TUNER_CAP_STEREO |
+ V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
+ vt->rxsubchans = V4L2_TUNER_SUB_MONO;
+ break;
+
+ case VIDIOC_G_CHIP_IDENT:
+ return v4l2_chip_ident_i2c_client(client, arg, V4L2_IDENT_VP27SMPX, 0);
+
+ case VIDIOC_LOG_STATUS:
+ v4l_info(client, "Audio Mode: %u%s\n", state->audmode,
+ state->radio ? " (Radio)" : "");
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* i2c implementation */
+
+/*
+ * Generic i2c probe
+ * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
+ */
+
+static struct i2c_driver i2c_driver;
+
+static int vp27smpx_attach(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct vp27smpx_state *state;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return 0;
+
+ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (client == 0)
+ return -ENOMEM;
+
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &i2c_driver;
+ snprintf(client->name, sizeof(client->name) - 1, "vp27smpx");
+
+ v4l_info(client, "chip found @ 0x%x (%s)\n", address << 1, adapter->name);
+
+ state = kzalloc(sizeof(struct vp27smpx_state), GFP_KERNEL);
+ if (state == NULL) {
+ kfree(client);
+ return -ENOMEM;
+ }
+ state->audmode = V4L2_TUNER_MODE_STEREO;
+ i2c_set_clientdata(client, state);
+
+ /* initialize vp27smpx */
+ vp27smpx_set_audmode(client, state->audmode);
+ i2c_attach_client(client);
+
+ return 0;
+}
+
+static int vp27smpx_probe(struct i2c_adapter *adapter)
+{
+ if (adapter->class & I2C_CLASS_TV_ANALOG)
+ return i2c_probe(adapter, &addr_data, vp27smpx_attach);
+ return 0;
+}
+
+static int vp27smpx_detach(struct i2c_client *client)
+{
+ struct vp27smpx_state *state = i2c_get_clientdata(client);
+ int err;
+
+ err = i2c_detach_client(client);
+ if (err) {
+ return err;
+ }
+ kfree(state);
+ kfree(client);
+
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* i2c implementation */
+static struct i2c_driver i2c_driver = {
+ .driver = {
+ .name = "vp27smpx",
+ },
+ .id = I2C_DRIVERID_VP27SMPX,
+ .attach_adapter = vp27smpx_probe,
+ .detach_client = vp27smpx_detach,
+ .command = vp27smpx_command,
+};
+
+
+static int __init vp27smpx_init_module(void)
+{
+ return i2c_add_driver(&i2c_driver);
+}
+
+static void __exit vp27smpx_cleanup_module(void)
+{
+ i2c_del_driver(&i2c_driver);
+}
+
+module_init(vp27smpx_init_module);
+module_exit(vp27smpx_cleanup_module);
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index 8f31613b990..5a1b5f5a7d4 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -42,7 +42,6 @@
#include <asm/page.h>
#include <asm/uaccess.h>
#include <linux/page-flags.h>
-#include <linux/moduleparam.h>
#include "w9968cf.h"
#include "w9968cf_decoder.h"
@@ -2680,7 +2679,7 @@ static int w9968cf_open(struct inode* inode, struct file* filp)
/* This the only safe way to prevent race conditions with disconnect */
if (!down_read_trylock(&w9968cf_disconnect))
- return -ERESTARTSYS;
+ return -EAGAIN;
cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
index 703b741e46d..08a93c31c0a 100644
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ b/drivers/media/video/zc0301/zc0301_core.c
@@ -26,7 +26,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/param.h>
-#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/device.h>
@@ -656,7 +655,7 @@ static int zc0301_open(struct inode* inode, struct file* filp)
int err = 0;
if (!down_read_trylock(&zc0301_dev_lock))
- return -ERESTARTSYS;
+ return -EAGAIN;
cam = video_get_drvdata(video_devdata(filp));
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index 73162a3a61d..48da36a15fc 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -64,15 +64,15 @@
extern const struct zoran_format zoran_formats[];
static int card[BUZ_MAX] = { -1, -1, -1, -1 };
-module_param_array(card, int, NULL, 0);
+module_param_array(card, int, NULL, 0444);
MODULE_PARM_DESC(card, "The type of card");
static int encoder[BUZ_MAX] = { -1, -1, -1, -1 };
-module_param_array(encoder, int, NULL, 0);
+module_param_array(encoder, int, NULL, 0444);
MODULE_PARM_DESC(encoder, "i2c TV encoder");
static int decoder[BUZ_MAX] = { -1, -1, -1, -1 };
-module_param_array(decoder, int, NULL, 0);
+module_param_array(decoder, int, NULL, 0444);
MODULE_PARM_DESC(decoder, "i2c TV decoder");
/*
@@ -84,29 +84,31 @@ MODULE_PARM_DESC(decoder, "i2c TV decoder");
*/
static unsigned long vidmem = 0; /* Video memory base address */
-module_param(vidmem, ulong, 0);
+module_param(vidmem, ulong, 0444);
+MODULE_PARM_DESC(vidmem, "Default video memory base address");
/*
Default input and video norm at startup of the driver.
*/
-static int default_input = 0; /* 0=Composite, 1=S-Video */
-module_param(default_input, int, 0);
+static unsigned int default_input = 0; /* 0=Composite, 1=S-Video */
+module_param(default_input, uint, 0444);
MODULE_PARM_DESC(default_input,
"Default input (0=Composite, 1=S-Video, 2=Internal)");
static int default_mux = 1; /* 6 Eyes input selection */
-module_param(default_mux, int, 0);
+module_param(default_mux, int, 0644);
MODULE_PARM_DESC(default_mux,
"Default 6 Eyes mux setting (Input selection)");
static int default_norm = 0; /* 0=PAL, 1=NTSC 2=SECAM */
-module_param(default_norm, int, 0);
+module_param(default_norm, int, 0444);
MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)");
-static int video_nr = -1; /* /dev/videoN, -1 for autodetect */
-module_param(video_nr, int, 0);
-MODULE_PARM_DESC(video_nr, "video device number");
+/* /dev/videoN, -1 for autodetect */
+static int video_nr[BUZ_MAX] = {-1, -1, -1, -1};
+module_param_array(video_nr, int, NULL, 0444);
+MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)");
/*
Number and size of grab buffers for Video 4 Linux
@@ -127,28 +129,27 @@ MODULE_PARM_DESC(video_nr, "video device number");
int v4l_nbufs = 2;
int v4l_bufsize = 128; /* Everybody should be able to work with this setting */
-module_param(v4l_nbufs, int, 0);
+module_param(v4l_nbufs, int, 0644);
MODULE_PARM_DESC(v4l_nbufs, "Maximum number of V4L buffers to use");
-module_param(v4l_bufsize, int, 0);
+module_param(v4l_bufsize, int, 0644);
MODULE_PARM_DESC(v4l_bufsize, "Maximum size per V4L buffer (in kB)");
int jpg_nbufs = 32;
int jpg_bufsize = 512; /* max size for 100% quality full-PAL frame */
-module_param(jpg_nbufs, int, 0);
+module_param(jpg_nbufs, int, 0644);
MODULE_PARM_DESC(jpg_nbufs, "Maximum number of JPG buffers to use");
-module_param(jpg_bufsize, int, 0);
+module_param(jpg_bufsize, int, 0644);
MODULE_PARM_DESC(jpg_bufsize, "Maximum size per JPG buffer (in kB)");
int pass_through = 0; /* 1=Pass through TV signal when device is not used */
/* 0=Show color bar when device is not used (LML33: only if lml33dpath=1) */
-module_param(pass_through, int, 0);
+module_param(pass_through, int, 0644);
MODULE_PARM_DESC(pass_through,
"Pass TV signal through to TV-out when idling");
-static int debug = 1;
-int *zr_debug = &debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-4)");
+int zr36067_debug = 1;
+module_param_named(debug, zr36067_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0-5)");
MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver");
MODULE_AUTHOR("Serguei Miridonov");
@@ -161,12 +162,6 @@ static struct pci_device_id zr36067_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl);
-#define dprintk(num, format, args...) \
- do { \
- if (*zr_debug >= num) \
- printk(format, ##args); \
- } while (0)
-
int zoran_num; /* number of Buzs in use */
struct zoran zoran[BUZ_MAX];
@@ -1075,7 +1070,7 @@ test_interrupts (struct zoran *zr)
if (timeout) {
dprintk(1, ": time spent: %d\n", 1 * HZ - timeout);
}
- if (*zr_debug > 1)
+ if (zr36067_debug > 1)
print_interrupts(zr);
btwrite(icr, ZR36057_ICR);
}
@@ -1121,7 +1116,14 @@ zr36057_init (struct zoran *zr)
zr->timing = zr->card.tvn[zr->norm];
}
- zr->input = default_input = (default_input ? 1 : 0);
+ if (default_input > zr->card.inputs-1) {
+ dprintk(1,
+ KERN_WARNING
+ "%s: default_input value %d out of range (0-%d)\n",
+ ZR_DEVNAME(zr), default_input, zr->card.inputs-1);
+ default_input = 0;
+ }
+ zr->input = default_input;
/* Should the following be reset at every open ? */
zr->hue = 32768;
@@ -1153,12 +1155,12 @@ zr36057_init (struct zoran *zr)
*/
memcpy(zr->video_dev, &zoran_template, sizeof(zoran_template));
strcpy(zr->video_dev->name, ZR_DEVNAME(zr));
- err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr);
+ err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]);
if (err < 0)
goto exit_unregister;
zoran_init_hardware(zr);
- if (*zr_debug > 2)
+ if (zr36067_debug > 2)
detect_guest_activity(zr);
test_interrupts(zr);
if (!pass_through) {
@@ -1620,7 +1622,7 @@ init_dc10_cards (void)
}
/* random nonsense */
- dprintk(5, KERN_DEBUG "Jotti is een held!\n");
+ dprintk(6, KERN_DEBUG "Jotti is een held!\n");
/* some mainboards might not do PCI-PCI data transfer well */
if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL|PCIPCI_ALIMAGIK)) {
diff --git a/drivers/media/video/zoran_card.h b/drivers/media/video/zoran_card.h
index ad997c30bee..8444ca0a5f3 100644
--- a/drivers/media/video/zoran_card.h
+++ b/drivers/media/video/zoran_card.h
@@ -30,6 +30,14 @@
#ifndef __ZORAN_CARD_H__
#define __ZORAN_CARD_H__
+extern int zr36067_debug;
+
+#define dprintk(num, format, args...) \
+ do { \
+ if (zr36067_debug >= num) \
+ printk(format, ##args); \
+ } while (0)
+
/* Anybody who uses more than four? */
#define BUZ_MAX 4
extern int zoran_num;
diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c
index ba2f4ed2948..68c7c505587 100644
--- a/drivers/media/video/zoran_device.c
+++ b/drivers/media/video/zoran_device.c
@@ -52,6 +52,7 @@
#include "videocodec.h"
#include "zoran.h"
#include "zoran_device.h"
+#include "zoran_card.h"
#define IRQ_MASK ( ZR36057_ISR_GIRQ0 | \
ZR36057_ISR_GIRQ1 | \
@@ -59,14 +60,6 @@
extern const struct zoran_format zoran_formats[];
-extern int *zr_debug;
-
-#define dprintk(num, format, args...) \
- do { \
- if (*zr_debug >= num) \
- printk(format, ##args); \
- } while (0)
-
static int lml33dpath = 0; /* 1 will use digital path in capture
* mode instead of analog. It can be
* used for picture adjustments using
@@ -76,7 +69,7 @@ static int lml33dpath = 0; /* 1 will use digital path in capture
* load on Bt819 input, there will be
* some image imperfections */
-module_param(lml33dpath, bool, 0);
+module_param(lml33dpath, bool, 0644);
MODULE_PARM_DESC(lml33dpath,
"Use digital path capture mode (on LML33 cards)");
@@ -174,7 +167,7 @@ post_office_read (struct zoran *zr,
static void
dump_guests (struct zoran *zr)
{
- if (*zr_debug > 2) {
+ if (zr36067_debug > 2) {
int i, guest[8];
for (i = 1; i < 8; i++) { // Don't read jpeg codec here
@@ -1271,7 +1264,7 @@ error_handler (struct zoran *zr,
zr->num_errors++;
/* Report error */
- if (*zr_debug > 1 && zr->num_errors <= 8) {
+ if (zr36067_debug > 1 && zr->num_errors <= 8) {
long frame;
frame =
zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME];
@@ -1531,7 +1524,7 @@ zoran_irq (int irq,
if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
- if (*zr_debug > 1 &&
+ if (zr36067_debug > 1 &&
(!zr->frame_num || zr->JPEG_error)) {
printk(KERN_INFO
"%s: first frame ready: state=0x%08x odd_even=%d field_per_buff=%d delay=%d\n",
@@ -1568,7 +1561,7 @@ zoran_irq (int irq,
zr->JPEG_missed;
}
- if (*zr_debug > 2 && zr->frame_num < 6) {
+ if (zr36067_debug > 2 && zr->frame_num < 6) {
int i;
printk("%s: seq=%ld stat_com:",
ZR_DEVNAME(zr), zr->jpg_seq_num);
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index 72a037b75d6..1c14fa2bd41 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -200,14 +200,6 @@ const struct zoran_format zoran_formats[] = {
// RJ: Test only - want to test BUZ_USE_HIMEM even when CONFIG_BIGPHYS_AREA is defined
-extern int *zr_debug;
-
-#define dprintk(num, format, args...) \
- do { \
- if (*zr_debug >= num) \
- printk(format, ##args); \
- } while (0)
-
extern int v4l_nbufs;
extern int v4l_bufsize;
extern int jpg_nbufs;
@@ -215,8 +207,8 @@ extern int jpg_bufsize;
extern int pass_through;
static int lock_norm = 0; /* 1=Don't change TV standard (norm) */
-module_param(lock_norm, int, 0);
-MODULE_PARM_DESC(lock_norm, "Users can't change norm");
+module_param(lock_norm, int, 0644);
+MODULE_PARM_DESC(lock_norm, "Prevent norm changes (1 = ignore, >1 = fail)");
#ifdef CONFIG_VIDEO_V4L2
/* small helper function for calculating buffersizes for v4l2
@@ -347,10 +339,7 @@ v4l_fbuffer_alloc (struct file *file)
if (fh->v4l_buffers.buffer_size <= MAX_KMALLOC_MEM) {
/* Use kmalloc */
- mem =
- (unsigned char *) kmalloc(fh->v4l_buffers.
- buffer_size,
- GFP_KERNEL);
+ mem = kmalloc(fh->v4l_buffers.buffer_size, GFP_KERNEL);
if (mem == 0) {
dprintk(1,
KERN_ERR
@@ -1106,12 +1095,10 @@ jpg_sync (struct file *file,
frame = zr->jpg_pend[zr->jpg_que_tail & BUZ_MASK_FRAME];
/* buffer should now be in BUZ_STATE_DONE */
- if (*zr_debug > 0)
- if (zr->jpg_buffers.buffer[frame].state != BUZ_STATE_DONE)
- dprintk(2,
- KERN_ERR
- "%s: jpg_sync() - internal state error\n",
- ZR_DEVNAME(zr));
+ if (zr->jpg_buffers.buffer[frame].state != BUZ_STATE_DONE)
+ dprintk(2,
+ KERN_ERR "%s: jpg_sync() - internal state error\n",
+ ZR_DEVNAME(zr));
*bs = zr->jpg_buffers.buffer[frame].bs;
bs->frame = frame;
@@ -1389,7 +1376,7 @@ zoran_close (struct inode *inode,
/* disable interrupts */
btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR);
- if (*zr_debug > 1)
+ if (zr36067_debug > 1)
print_interrupts(zr);
/* Overlay off */
@@ -3206,7 +3193,7 @@ zoran_do_ioctl (struct inode *inode,
"%s: VIDIOC_QUERYBUF - index=%d, type=%d\n",
ZR_DEVNAME(zr), buf->index, buf->type);
- memset(buf, 0, sizeof(buf));
+ memset(buf, 0, sizeof(*buf));
buf->type = type;
buf->index = index;
diff --git a/drivers/media/video/zoran_procfs.c b/drivers/media/video/zoran_procfs.c
index 446ae8d5c3d..328ed6e7ac6 100644
--- a/drivers/media/video/zoran_procfs.c
+++ b/drivers/media/video/zoran_procfs.c
@@ -48,14 +48,7 @@
#include "videocodec.h"
#include "zoran.h"
#include "zoran_procfs.h"
-
-extern int *zr_debug;
-
-#define dprintk(num, format, args...) \
- do { \
- if (*zr_debug >= num) \
- printk(format, ##args); \
- } while (0)
+#include "zoran_card.h"
#ifdef CONFIG_PROC_FS
struct procfs_params_zr36067 {
diff --git a/drivers/media/video/zr36016.c b/drivers/media/video/zr36016.c
index 62f77584fb8..dd084555da8 100644
--- a/drivers/media/video/zr36016.c
+++ b/drivers/media/video/zr36016.c
@@ -38,11 +38,11 @@
#include<linux/videodev.h> */
/* I/O commands, error codes */
-#include<asm/io.h>
+#include <asm/io.h>
//#include<errno.h>
/* v4l API */
-#include<linux/videodev.h>
+#include <linux/videodev.h>
/* headerfile of this module */
#include"zr36016.h"
diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c
index a6bbd125631..9f622e00c47 100644
--- a/drivers/media/video/zr36050.c
+++ b/drivers/media/video/zr36050.c
@@ -38,14 +38,14 @@
#include<linux/videodev.h> */
/* I/O commands, error codes */
-#include<asm/io.h>
+#include <asm/io.h>
//#include<errno.h>
/* headerfile of this module */
-#include"zr36050.h"
+#include "zr36050.h"
/* codec io API */
-#include"videocodec.h"
+#include "videocodec.h"
/* it doesn't make sense to have more than 20 or so,
just to prevent some unwanted loops */
diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c
index 97c8f9b9dc1..1ef14fef08e 100644
--- a/drivers/media/video/zr36060.c
+++ b/drivers/media/video/zr36060.c
@@ -38,14 +38,14 @@
#include<linux/videodev.h> */
/* I/O commands, error codes */
-#include<asm/io.h>
+#include <asm/io.h>
//#include<errno.h>
/* headerfile of this module */
-#include"zr36060.h"
+#include "zr36060.h"
/* codec io API */
-#include"videocodec.h"
+#include "videocodec.h"
/* it doesn't make sense to have more than 20 or so,
just to prevent some unwanted loops */
diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig
index a49cb9737cd..aa8a4e46194 100644
--- a/drivers/mmc/card/Kconfig
+++ b/drivers/mmc/card/Kconfig
@@ -32,3 +32,10 @@ config MMC_BLOCK_BOUNCE
If unsure, say Y here.
+config SDIO_UART
+ tristate "SDIO UART/GPS class support"
+ depends on MMC
+ help
+ SDIO function driver for SDIO cards that implements the UART
+ class, as well as the GPS class which appears like a UART.
+
diff --git a/drivers/mmc/card/Makefile b/drivers/mmc/card/Makefile
index cf8c939867f..fc5a784cfa1 100644
--- a/drivers/mmc/card/Makefile
+++ b/drivers/mmc/card/Makefile
@@ -9,3 +9,5 @@ endif
obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
mmc_block-objs := block.o queue.o
+obj-$(CONFIG_SDIO_UART) += sdio_uart.o
+
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 93fe2e5dd61..e38d5a3b2a8 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -151,17 +151,19 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
cmd.opcode = MMC_APP_CMD;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 0);
- if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD))
+ if (err)
+ return (u32)-1;
+ if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
return (u32)-1;
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = SD_APP_SEND_NUM_WR_BLKS;
cmd.arg = 0;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
memset(&data, 0, sizeof(struct mmc_data));
@@ -192,7 +194,7 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
mmc_wait_for_req(card->host, &mrq);
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE)
+ if (cmd.error || data.error)
return (u32)-1;
blocks = ntohl(blocks);
@@ -220,17 +222,15 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.cmd.arg = req->sector;
if (!mmc_card_blockaddr(card))
brq.cmd.arg <<= 9;
- brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+ brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
brq.data.blksz = 1 << md->block_bits;
brq.stop.opcode = MMC_STOP_TRANSMISSION;
brq.stop.arg = 0;
- brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
if (brq.data.blocks > card->host->max_blk_count)
brq.data.blocks = card->host->max_blk_count;
- mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ);
-
/*
* If the host doesn't support multiple block writes, force
* block writes to single block. SD cards are excepted from
@@ -243,8 +243,12 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.data.blocks = 1;
if (brq.data.blocks > 1) {
- brq.data.flags |= MMC_DATA_MULTI;
- brq.mrq.stop = &brq.stop;
+ /* SPI multiblock writes terminate using a special
+ * token, not a STOP_TRANSMISSION request.
+ */
+ if (!mmc_host_is_spi(card->host)
+ || rq_data_dir(req) == READ)
+ brq.mrq.stop = &brq.stop;
readcmd = MMC_READ_MULTIPLE_BLOCK;
writecmd = MMC_WRITE_MULTIPLE_BLOCK;
} else {
@@ -261,6 +265,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.data.flags |= MMC_DATA_WRITE;
}
+ mmc_set_data_timeout(&brq.data, card);
+
brq.data.sg = mq->sg;
brq.data.sg_len = mmc_queue_map_sg(mq);
@@ -302,7 +308,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
goto cmd_err;
}
- if (rq_data_dir(req) != READ) {
+ if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
do {
int err;
@@ -510,7 +516,7 @@ mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card)
mmc_claim_host(card->host);
cmd.opcode = MMC_SET_BLOCKLEN;
cmd.arg = 1 << md->block_bits;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 5);
mmc_release_host(card->host);
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
new file mode 100644
index 00000000000..d552de68311
--- /dev/null
+++ b/drivers/mmc/card/sdio_uart.c
@@ -0,0 +1,1158 @@
+/*
+ * linux/drivers/mmc/card/sdio_uart.c - SDIO UART/GPS driver
+ *
+ * Based on drivers/serial/8250.c and drivers/serial/serial_core.c
+ * by Russell King.
+ *
+ * Author: Nicolas Pitre
+ * Created: June 15, 2007
+ * Copyright: MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+/*
+ * Note: Although this driver assumes a 16550A-like UART implementation,
+ * it is not possible to leverage the common 8250/16550 driver, nor the
+ * core UART infrastructure, as they assumes direct access to the hardware
+ * registers, often under a spinlock. This is not possible in the SDIO
+ * context as SDIO access functions must be able to sleep.
+ *
+ * Because we need to lock the SDIO host to ensure an exclusive access to
+ * the card, we simply rely on that lock to also prevent and serialize
+ * concurrent access to the same port.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/serial_reg.h>
+#include <linux/circ_buf.h>
+#include <linux/gfp.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+
+
+#define UART_NR 8 /* Number of UARTs this driver can handle */
+
+
+#define UART_XMIT_SIZE PAGE_SIZE
+#define WAKEUP_CHARS 256
+
+#define circ_empty(circ) ((circ)->head == (circ)->tail)
+#define circ_clear(circ) ((circ)->head = (circ)->tail = 0)
+
+#define circ_chars_pending(circ) \
+ (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+#define circ_chars_free(circ) \
+ (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+
+struct uart_icount {
+ __u32 cts;
+ __u32 dsr;
+ __u32 rng;
+ __u32 dcd;
+ __u32 rx;
+ __u32 tx;
+ __u32 frame;
+ __u32 overrun;
+ __u32 parity;
+ __u32 brk;
+};
+
+struct sdio_uart_port {
+ struct kref kref;
+ struct tty_struct *tty;
+ unsigned int index;
+ unsigned int opened;
+ struct mutex open_lock;
+ struct sdio_func *func;
+ struct mutex func_lock;
+ struct task_struct *in_sdio_uart_irq;
+ unsigned int regs_offset;
+ struct circ_buf xmit;
+ spinlock_t write_lock;
+ struct uart_icount icount;
+ unsigned int uartclk;
+ unsigned int mctrl;
+ unsigned int read_status_mask;
+ unsigned int ignore_status_mask;
+ unsigned char x_char;
+ unsigned char ier;
+ unsigned char lcr;
+};
+
+static struct sdio_uart_port *sdio_uart_table[UART_NR];
+static DEFINE_SPINLOCK(sdio_uart_table_lock);
+
+static int sdio_uart_add_port(struct sdio_uart_port *port)
+{
+ int index, ret = -EBUSY;
+
+ kref_init(&port->kref);
+ mutex_init(&port->open_lock);
+ mutex_init(&port->func_lock);
+ spin_lock_init(&port->write_lock);
+
+ spin_lock(&sdio_uart_table_lock);
+ for (index = 0; index < UART_NR; index++) {
+ if (!sdio_uart_table[index]) {
+ port->index = index;
+ sdio_uart_table[index] = port;
+ ret = 0;
+ break;
+ }
+ }
+ spin_unlock(&sdio_uart_table_lock);
+
+ return ret;
+}
+
+static struct sdio_uart_port *sdio_uart_port_get(unsigned index)
+{
+ struct sdio_uart_port *port;
+
+ if (index >= UART_NR)
+ return NULL;
+
+ spin_lock(&sdio_uart_table_lock);
+ port = sdio_uart_table[index];
+ if (port)
+ kref_get(&port->kref);
+ spin_unlock(&sdio_uart_table_lock);
+
+ return port;
+}
+
+static void sdio_uart_port_destroy(struct kref *kref)
+{
+ struct sdio_uart_port *port =
+ container_of(kref, struct sdio_uart_port, kref);
+ kfree(port);
+}
+
+static void sdio_uart_port_put(struct sdio_uart_port *port)
+{
+ kref_put(&port->kref, sdio_uart_port_destroy);
+}
+
+static void sdio_uart_port_remove(struct sdio_uart_port *port)
+{
+ struct sdio_func *func;
+
+ BUG_ON(sdio_uart_table[port->index] != port);
+
+ spin_lock(&sdio_uart_table_lock);
+ sdio_uart_table[port->index] = NULL;
+ spin_unlock(&sdio_uart_table_lock);
+
+ /*
+ * We're killing a port that potentially still is in use by
+ * the tty layer. Be careful to prevent any further access
+ * to the SDIO function and arrange for the tty layer to
+ * give up on that port ASAP.
+ * Beware: the lock ordering is critical.
+ */
+ mutex_lock(&port->open_lock);
+ mutex_lock(&port->func_lock);
+ func = port->func;
+ sdio_claim_host(func);
+ port->func = NULL;
+ mutex_unlock(&port->func_lock);
+ if (port->opened)
+ tty_hangup(port->tty);
+ mutex_unlock(&port->open_lock);
+ sdio_release_irq(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+
+ sdio_uart_port_put(port);
+}
+
+static int sdio_uart_claim_func(struct sdio_uart_port *port)
+{
+ mutex_lock(&port->func_lock);
+ if (unlikely(!port->func)) {
+ mutex_unlock(&port->func_lock);
+ return -ENODEV;
+ }
+ if (likely(port->in_sdio_uart_irq != current))
+ sdio_claim_host(port->func);
+ mutex_unlock(&port->func_lock);
+ return 0;
+}
+
+static inline void sdio_uart_release_func(struct sdio_uart_port *port)
+{
+ if (likely(port->in_sdio_uart_irq != current))
+ sdio_release_host(port->func);
+}
+
+static inline unsigned int sdio_in(struct sdio_uart_port *port, int offset)
+{
+ unsigned char c;
+ c = sdio_readb(port->func, port->regs_offset + offset, NULL);
+ return c;
+}
+
+static inline void sdio_out(struct sdio_uart_port *port, int offset, int value)
+{
+ sdio_writeb(port->func, value, port->regs_offset + offset, NULL);
+}
+
+static unsigned int sdio_uart_get_mctrl(struct sdio_uart_port *port)
+{
+ unsigned char status;
+ unsigned int ret;
+
+ status = sdio_in(port, UART_MSR);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void sdio_uart_write_mctrl(struct sdio_uart_port *port, unsigned int mctrl)
+{
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ sdio_out(port, UART_MCR, mcr);
+}
+
+static inline void sdio_uart_update_mctrl(struct sdio_uart_port *port,
+ unsigned int set, unsigned int clear)
+{
+ unsigned int old;
+
+ old = port->mctrl;
+ port->mctrl = (old & ~clear) | set;
+ if (old != port->mctrl)
+ sdio_uart_write_mctrl(port, port->mctrl);
+}
+
+#define sdio_uart_set_mctrl(port, x) sdio_uart_update_mctrl(port, x, 0)
+#define sdio_uart_clear_mctrl(port, x) sdio_uart_update_mctrl(port, 0, x)
+
+static void sdio_uart_change_speed(struct sdio_uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned char cval, fcr = 0;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ cval = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= UART_LCR_STOP;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+
+ for (;;) {
+ baud = tty_termios_baud_rate(termios);
+ if (baud == 0)
+ baud = 9600; /* Special case: B0 rate. */
+ if (baud <= port->uartclk)
+ break;
+ /*
+ * Oops, the quotient was zero. Try again with the old
+ * baud rate if possible, otherwise default to 9600.
+ */
+ termios->c_cflag &= ~CBAUD;
+ if (old) {
+ termios->c_cflag |= old->c_cflag & CBAUD;
+ old = NULL;
+ } else
+ termios->c_cflag |= B9600;
+ }
+ quot = (2 * port->uartclk + baud) / (2 * baud);
+
+ if (baud < 2400)
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10;
+
+ port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ port->ier &= ~UART_IER_MSI;
+ if ((termios->c_cflag & CRTSCTS) || !(termios->c_cflag & CLOCAL))
+ port->ier |= UART_IER_MSI;
+
+ port->lcr = cval;
+
+ sdio_out(port, UART_IER, port->ier);
+ sdio_out(port, UART_LCR, cval | UART_LCR_DLAB);
+ sdio_out(port, UART_DLL, quot & 0xff);
+ sdio_out(port, UART_DLM, quot >> 8);
+ sdio_out(port, UART_LCR, cval);
+ sdio_out(port, UART_FCR, fcr);
+
+ sdio_uart_write_mctrl(port, port->mctrl);
+}
+
+static void sdio_uart_start_tx(struct sdio_uart_port *port)
+{
+ if (!(port->ier & UART_IER_THRI)) {
+ port->ier |= UART_IER_THRI;
+ sdio_out(port, UART_IER, port->ier);
+ }
+}
+
+static void sdio_uart_stop_tx(struct sdio_uart_port *port)
+{
+ if (port->ier & UART_IER_THRI) {
+ port->ier &= ~UART_IER_THRI;
+ sdio_out(port, UART_IER, port->ier);
+ }
+}
+
+static void sdio_uart_stop_rx(struct sdio_uart_port *port)
+{
+ port->ier &= ~UART_IER_RLSI;
+ port->read_status_mask &= ~UART_LSR_DR;
+ sdio_out(port, UART_IER, port->ier);
+}
+
+static void sdio_uart_receive_chars(struct sdio_uart_port *port, int *status)
+{
+ struct tty_struct *tty = port->tty;
+ unsigned int ch, flag;
+ int max_count = 256;
+
+ do {
+ ch = sdio_in(port, UART_RX);
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+ /*
+ * For statistics only
+ */
+ if (*status & UART_LSR_BI) {
+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
+ port->icount.brk++;
+ } else if (*status & UART_LSR_PE)
+ port->icount.parity++;
+ else if (*status & UART_LSR_FE)
+ port->icount.frame++;
+ if (*status & UART_LSR_OE)
+ port->icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ignored.
+ */
+ *status &= port->read_status_mask;
+ if (*status & UART_LSR_BI) {
+ flag = TTY_BREAK;
+ } else if (*status & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (*status & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+
+ if ((*status & port->ignore_status_mask & ~UART_LSR_OE) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+
+ /*
+ * Overrun is special. Since it's reported immediately,
+ * it doesn't affect the current character.
+ */
+ if (*status & ~port->ignore_status_mask & UART_LSR_OE)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+ *status = sdio_in(port, UART_LSR);
+ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
+ tty_flip_buffer_push(tty);
+}
+
+static void sdio_uart_transmit_chars(struct sdio_uart_port *port)
+{
+ struct circ_buf *xmit = &port->xmit;
+ int count;
+
+ if (port->x_char) {
+ sdio_out(port, UART_TX, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+ if (circ_empty(xmit) || port->tty->stopped || port->tty->hw_stopped) {
+ sdio_uart_stop_tx(port);
+ return;
+ }
+
+ count = 16;
+ do {
+ sdio_out(port, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (circ_chars_pending(xmit) < WAKEUP_CHARS)
+ tty_wakeup(port->tty);
+
+ if (circ_empty(xmit))
+ sdio_uart_stop_tx(port);
+}
+
+static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
+{
+ int status;
+
+ status = sdio_in(port, UART_MSR);
+
+ if ((status & UART_MSR_ANY_DELTA) == 0)
+ return;
+
+ if (status & UART_MSR_TERI)
+ port->icount.rng++;
+ if (status & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ port->icount.dcd++;
+ if (status & UART_MSR_DCTS) {
+ port->icount.cts++;
+ if (port->tty->termios->c_cflag & CRTSCTS) {
+ int cts = (status & UART_MSR_CTS);
+ if (port->tty->hw_stopped) {
+ if (cts) {
+ port->tty->hw_stopped = 0;
+ sdio_uart_start_tx(port);
+ tty_wakeup(port->tty);
+ }
+ } else {
+ if (!cts) {
+ port->tty->hw_stopped = 1;
+ sdio_uart_stop_tx(port);
+ }
+ }
+ }
+ }
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static void sdio_uart_irq(struct sdio_func *func)
+{
+ struct sdio_uart_port *port = sdio_get_drvdata(func);
+ unsigned int iir, lsr;
+
+ /*
+ * In a few places sdio_uart_irq() is called directly instead of
+ * waiting for the actual interrupt to be raised and the SDIO IRQ
+ * thread scheduled in order to reduce latency. However, some
+ * interaction with the tty core may end up calling us back
+ * (serial echo, flow control, etc.) through those same places
+ * causing undesirable effects. Let's stop the recursion here.
+ */
+ if (unlikely(port->in_sdio_uart_irq == current))
+ return;
+
+ iir = sdio_in(port, UART_IIR);
+ if (iir & UART_IIR_NO_INT)
+ return;
+
+ port->in_sdio_uart_irq = current;
+ lsr = sdio_in(port, UART_LSR);
+ if (lsr & UART_LSR_DR)
+ sdio_uart_receive_chars(port, &lsr);
+ sdio_uart_check_modem_status(port);
+ if (lsr & UART_LSR_THRE)
+ sdio_uart_transmit_chars(port);
+ port->in_sdio_uart_irq = NULL;
+}
+
+static int sdio_uart_startup(struct sdio_uart_port *port)
+{
+ unsigned long page;
+ int ret;
+
+ /*
+ * Set the TTY IO error marker - we will only clear this
+ * once we have successfully opened the port.
+ */
+ set_bit(TTY_IO_ERROR, &port->tty->flags);
+
+ /* Initialise and allocate the transmit buffer. */
+ page = __get_free_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
+ port->xmit.buf = (unsigned char *)page;
+ circ_clear(&port->xmit);
+
+ ret = sdio_uart_claim_func(port);
+ if (ret)
+ goto err1;
+ ret = sdio_enable_func(port->func);
+ if (ret)
+ goto err2;
+ ret = sdio_claim_irq(port->func, sdio_uart_irq);
+ if (ret)
+ goto err3;
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reenabled in sdio_change_speed())
+ */
+ sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO);
+ sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ sdio_out(port, UART_FCR, 0);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) sdio_in(port, UART_LSR);
+ (void) sdio_in(port, UART_RX);
+ (void) sdio_in(port, UART_IIR);
+ (void) sdio_in(port, UART_MSR);
+
+ /*
+ * Now, initialize the UART
+ */
+ sdio_out(port, UART_LCR, UART_LCR_WLEN8);
+
+ port->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
+ port->mctrl = TIOCM_OUT2;
+
+ sdio_uart_change_speed(port, port->tty->termios, NULL);
+
+ if (port->tty->termios->c_cflag & CBAUD)
+ sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
+
+ if (port->tty->termios->c_cflag & CRTSCTS)
+ if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
+ port->tty->hw_stopped = 1;
+
+ clear_bit(TTY_IO_ERROR, &port->tty->flags);
+
+ /* Kick the IRQ handler once while we're still holding the host lock */
+ sdio_uart_irq(port->func);
+
+ sdio_uart_release_func(port);
+ return 0;
+
+err3:
+ sdio_disable_func(port->func);
+err2:
+ sdio_uart_release_func(port);
+err1:
+ free_page((unsigned long)port->xmit.buf);
+ return ret;
+}
+
+static void sdio_uart_shutdown(struct sdio_uart_port *port)
+{
+ int ret;
+
+ ret = sdio_uart_claim_func(port);
+ if (ret)
+ goto skip;
+
+ sdio_uart_stop_rx(port);
+
+ /* TODO: wait here for TX FIFO to drain */
+
+ /* Turn off DTR and RTS early. */
+ if (port->tty->termios->c_cflag & HUPCL)
+ sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+
+ /* Disable interrupts from this port */
+ sdio_release_irq(port->func);
+ port->ier = 0;
+ sdio_out(port, UART_IER, 0);
+
+ sdio_uart_clear_mctrl(port, TIOCM_OUT2);
+
+ /* Disable break condition and FIFOs. */
+ port->lcr &= ~UART_LCR_SBC;
+ sdio_out(port, UART_LCR, port->lcr);
+ sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+ sdio_out(port, UART_FCR, 0);
+
+ sdio_disable_func(port->func);
+
+ sdio_uart_release_func(port);
+
+skip:
+ /* Free the transmit buffer page. */
+ free_page((unsigned long)port->xmit.buf);
+}
+
+static int sdio_uart_open (struct tty_struct *tty, struct file * filp)
+{
+ struct sdio_uart_port *port;
+ int ret;
+
+ port = sdio_uart_port_get(tty->index);
+ if (!port)
+ return -ENODEV;
+
+ mutex_lock(&port->open_lock);
+
+ /*
+ * Make sure not to mess up with a dead port
+ * which has not been closed yet.
+ */
+ if (tty->driver_data && tty->driver_data != port) {
+ mutex_unlock(&port->open_lock);
+ sdio_uart_port_put(port);
+ return -EBUSY;
+ }
+
+ if (!port->opened) {
+ tty->driver_data = port;
+ port->tty = tty;
+ ret = sdio_uart_startup(port);
+ if (ret) {
+ tty->driver_data = NULL;
+ port->tty = NULL;
+ mutex_unlock(&port->open_lock);
+ sdio_uart_port_put(port);
+ return ret;
+ }
+ }
+ port->opened++;
+ mutex_unlock(&port->open_lock);
+ return 0;
+}
+
+static void sdio_uart_close(struct tty_struct *tty, struct file * filp)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+
+ if (!port)
+ return;
+
+ mutex_lock(&port->open_lock);
+ BUG_ON(!port->opened);
+
+ /*
+ * This is messy. The tty layer calls us even when open()
+ * returned an error. Ignore this close request if tty->count
+ * is larger than port->count.
+ */
+ if (tty->count > port->opened) {
+ mutex_unlock(&port->open_lock);
+ return;
+ }
+
+ if (--port->opened == 0) {
+ tty->closing = 1;
+ sdio_uart_shutdown(port);
+ tty_ldisc_flush(tty);
+ port->tty = NULL;
+ tty->driver_data = NULL;
+ tty->closing = 0;
+ }
+ mutex_unlock(&port->open_lock);
+ sdio_uart_port_put(port);
+}
+
+static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf,
+ int count)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+ struct circ_buf *circ = &port->xmit;
+ int c, ret = 0;
+
+ if (!port->func)
+ return -ENODEV;
+
+ spin_lock(&port->write_lock);
+ while (1) {
+ c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE);
+ if (count < c)
+ c = count;
+ if (c <= 0)
+ break;
+ memcpy(circ->buf + circ->head, buf, c);
+ circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1);
+ buf += c;
+ count -= c;
+ ret += c;
+ }
+ spin_unlock(&port->write_lock);
+
+ if ( !(port->ier & UART_IER_THRI)) {
+ int err = sdio_uart_claim_func(port);
+ if (!err) {
+ sdio_uart_start_tx(port);
+ sdio_uart_irq(port->func);
+ sdio_uart_release_func(port);
+ } else
+ ret = err;
+ }
+
+ return ret;
+}
+
+static int sdio_uart_write_room(struct tty_struct *tty)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+ return port ? circ_chars_free(&port->xmit) : 0;
+}
+
+static int sdio_uart_chars_in_buffer(struct tty_struct *tty)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+ return port ? circ_chars_pending(&port->xmit) : 0;
+}
+
+static void sdio_uart_send_xchar(struct tty_struct *tty, char ch)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+
+ port->x_char = ch;
+ if (ch && !(port->ier & UART_IER_THRI)) {
+ if (sdio_uart_claim_func(port) != 0)
+ return;
+ sdio_uart_start_tx(port);
+ sdio_uart_irq(port->func);
+ sdio_uart_release_func(port);
+ }
+}
+
+static void sdio_uart_throttle(struct tty_struct *tty)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+
+ if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS))
+ return;
+
+ if (sdio_uart_claim_func(port) != 0)
+ return;
+
+ if (I_IXOFF(tty)) {
+ port->x_char = STOP_CHAR(tty);
+ sdio_uart_start_tx(port);
+ }
+
+ if (tty->termios->c_cflag & CRTSCTS)
+ sdio_uart_clear_mctrl(port, TIOCM_RTS);
+
+ sdio_uart_irq(port->func);
+ sdio_uart_release_func(port);
+}
+
+static void sdio_uart_unthrottle(struct tty_struct *tty)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+
+ if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS))
+ return;
+
+ if (sdio_uart_claim_func(port) != 0)
+ return;
+
+ if (I_IXOFF(tty)) {
+ if (port->x_char) {
+ port->x_char = 0;
+ } else {
+ port->x_char = START_CHAR(tty);
+ sdio_uart_start_tx(port);
+ }
+ }
+
+ if (tty->termios->c_cflag & CRTSCTS)
+ sdio_uart_set_mctrl(port, TIOCM_RTS);
+
+ sdio_uart_irq(port->func);
+ sdio_uart_release_func(port);
+}
+
+static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+ unsigned int cflag = tty->termios->c_cflag;
+
+#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+ if ((cflag ^ old_termios->c_cflag) == 0 &&
+ RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
+ return;
+
+ if (sdio_uart_claim_func(port) != 0)
+ return;
+
+ sdio_uart_change_speed(port, tty->termios, old_termios);
+
+ /* Handle transition to B0 status */
+ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
+ sdio_uart_clear_mctrl(port, TIOCM_RTS | TIOCM_DTR);
+
+ /* Handle transition away from B0 status */
+ if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
+ unsigned int mask = TIOCM_DTR;
+ if (!(cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags))
+ mask |= TIOCM_RTS;
+ sdio_uart_set_mctrl(port, mask);
+ }
+
+ /* Handle turning off CRTSCTS */
+ if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ sdio_uart_start_tx(port);
+ }
+
+ /* Handle turning on CRTSCTS */
+ if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
+ if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) {
+ tty->hw_stopped = 1;
+ sdio_uart_stop_tx(port);
+ }
+ }
+
+ sdio_uart_release_func(port);
+}
+
+static void sdio_uart_break_ctl(struct tty_struct *tty, int break_state)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+
+ if (sdio_uart_claim_func(port) != 0)
+ return;
+
+ if (break_state == -1)
+ port->lcr |= UART_LCR_SBC;
+ else
+ port->lcr &= ~UART_LCR_SBC;
+ sdio_out(port, UART_LCR, port->lcr);
+
+ sdio_uart_release_func(port);
+}
+
+static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+ int result;
+
+ result = sdio_uart_claim_func(port);
+ if (!result) {
+ result = port->mctrl | sdio_uart_get_mctrl(port);
+ sdio_uart_release_func(port);
+ }
+
+ return result;
+}
+
+static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct sdio_uart_port *port = tty->driver_data;
+ int result;
+
+ result =sdio_uart_claim_func(port);
+ if(!result) {
+ sdio_uart_update_mctrl(port, set, clear);
+ sdio_uart_release_func(port);
+ }
+
+ return result;
+}
+
+static int sdio_uart_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ int i, len = 0;
+ off_t begin = 0;
+
+ len += sprintf(page, "serinfo:1.0 driver%s%s revision:%s\n",
+ "", "", "");
+ for (i = 0; i < UART_NR && len < PAGE_SIZE - 96; i++) {
+ struct sdio_uart_port *port = sdio_uart_port_get(i);
+ if (port) {
+ len += sprintf(page+len, "%d: uart:SDIO", i);
+ if(capable(CAP_SYS_ADMIN)) {
+ len += sprintf(page + len, " tx:%d rx:%d",
+ port->icount.tx, port->icount.rx);
+ if (port->icount.frame)
+ len += sprintf(page + len, " fe:%d",
+ port->icount.frame);
+ if (port->icount.parity)
+ len += sprintf(page + len, " pe:%d",
+ port->icount.parity);
+ if (port->icount.brk)
+ len += sprintf(page + len, " brk:%d",
+ port->icount.brk);
+ if (port->icount.overrun)
+ len += sprintf(page + len, " oe:%d",
+ port->icount.overrun);
+ if (port->icount.cts)
+ len += sprintf(page + len, " cts:%d",
+ port->icount.cts);
+ if (port->icount.dsr)
+ len += sprintf(page + len, " dsr:%d",
+ port->icount.dsr);
+ if (port->icount.rng)
+ len += sprintf(page + len, " rng:%d",
+ port->icount.rng);
+ if (port->icount.dcd)
+ len += sprintf(page + len, " dcd:%d",
+ port->icount.dcd);
+ }
+ strcat(page, "\n");
+ len++;
+ sdio_uart_port_put(port);
+ }
+
+ if (len + begin > off + count)
+ goto done;
+ if (len + begin < off) {
+ begin += len;
+ len = 0;
+ }
+ }
+ *eof = 1;
+
+done:
+ if (off >= len + begin)
+ return 0;
+ *start = page + (off - begin);
+ return (count < begin + len - off) ? count : (begin + len - off);
+}
+
+static const struct tty_operations sdio_uart_ops = {
+ .open = sdio_uart_open,
+ .close = sdio_uart_close,
+ .write = sdio_uart_write,
+ .write_room = sdio_uart_write_room,
+ .chars_in_buffer = sdio_uart_chars_in_buffer,
+ .send_xchar = sdio_uart_send_xchar,
+ .throttle = sdio_uart_throttle,
+ .unthrottle = sdio_uart_unthrottle,
+ .set_termios = sdio_uart_set_termios,
+ .break_ctl = sdio_uart_break_ctl,
+ .tiocmget = sdio_uart_tiocmget,
+ .tiocmset = sdio_uart_tiocmset,
+ .read_proc = sdio_uart_read_proc,
+};
+
+static struct tty_driver *sdio_uart_tty_driver;
+
+static int sdio_uart_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ struct sdio_uart_port *port;
+ int ret;
+
+ port = kzalloc(sizeof(struct sdio_uart_port), GFP_KERNEL);
+ if (!port)
+ return -ENOMEM;
+
+ if (func->class == SDIO_CLASS_UART) {
+ printk(KERN_WARNING "%s: need info on UART class basic setup\n",
+ sdio_func_id(func));
+ kfree(port);
+ return -ENOSYS;
+ } else if (func->class == SDIO_CLASS_GPS) {
+ /*
+ * We need tuple 0x91. It contains SUBTPL_SIOREG
+ * and SUBTPL_RCVCAPS.
+ */
+ struct sdio_func_tuple *tpl;
+ for (tpl = func->tuples; tpl; tpl = tpl->next) {
+ if (tpl->code != 0x91)
+ continue;
+ if (tpl->size < 10)
+ continue;
+ if (tpl->data[1] == 0) /* SUBTPL_SIOREG */
+ break;
+ }
+ if (!tpl) {
+ printk(KERN_WARNING
+ "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
+ sdio_func_id(func));
+ kfree(port);
+ return -EINVAL;
+ }
+ printk(KERN_DEBUG "%s: Register ID = 0x%02x, Exp ID = 0x%02x\n",
+ sdio_func_id(func), tpl->data[2], tpl->data[3]);
+ port->regs_offset = (tpl->data[4] << 0) |
+ (tpl->data[5] << 8) |
+ (tpl->data[6] << 16);
+ printk(KERN_DEBUG "%s: regs offset = 0x%x\n",
+ sdio_func_id(func), port->regs_offset);
+ port->uartclk = tpl->data[7] * 115200;
+ if (port->uartclk == 0)
+ port->uartclk = 115200;
+ printk(KERN_DEBUG "%s: clk %d baudcode %u 4800-div %u\n",
+ sdio_func_id(func), port->uartclk,
+ tpl->data[7], tpl->data[8] | (tpl->data[9] << 8));
+ } else {
+ kfree(port);
+ return -EINVAL;
+ }
+
+ port->func = func;
+ sdio_set_drvdata(func, port);
+
+ ret = sdio_uart_add_port(port);
+ if (ret) {
+ kfree(port);
+ } else {
+ struct device *dev;
+ dev = tty_register_device(sdio_uart_tty_driver, port->index, &func->dev);
+ if (IS_ERR(dev)) {
+ sdio_uart_port_remove(port);
+ ret = PTR_ERR(dev);
+ }
+ }
+
+ return ret;
+}
+
+static void sdio_uart_remove(struct sdio_func *func)
+{
+ struct sdio_uart_port *port = sdio_get_drvdata(func);
+
+ tty_unregister_device(sdio_uart_tty_driver, port->index);
+ sdio_uart_port_remove(port);
+}
+
+static const struct sdio_device_id sdio_uart_ids[] = {
+ { SDIO_DEVICE_CLASS(SDIO_CLASS_UART) },
+ { SDIO_DEVICE_CLASS(SDIO_CLASS_GPS) },
+ { /* end: all zeroes */ },
+};
+
+MODULE_DEVICE_TABLE(sdio, sdio_uart_ids);
+
+static struct sdio_driver sdio_uart_driver = {
+ .probe = sdio_uart_probe,
+ .remove = sdio_uart_remove,
+ .name = "sdio_uart",
+ .id_table = sdio_uart_ids,
+};
+
+static int __init sdio_uart_init(void)
+{
+ int ret;
+ struct tty_driver *tty_drv;
+
+ sdio_uart_tty_driver = tty_drv = alloc_tty_driver(UART_NR);
+ if (!tty_drv)
+ return -ENOMEM;
+
+ tty_drv->owner = THIS_MODULE;
+ tty_drv->driver_name = "sdio_uart";
+ tty_drv->name = "ttySDIO";
+ tty_drv->major = 0; /* dynamically allocated */
+ tty_drv->minor_start = 0;
+ tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
+ tty_drv->subtype = SERIAL_TYPE_NORMAL;
+ tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ tty_drv->init_termios = tty_std_termios;
+ tty_drv->init_termios.c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty_drv->init_termios.c_ispeed = 4800;
+ tty_drv->init_termios.c_ospeed = 4800;
+ tty_set_operations(tty_drv, &sdio_uart_ops);
+
+ ret = tty_register_driver(tty_drv);
+ if (ret)
+ goto err1;
+
+ ret = sdio_register_driver(&sdio_uart_driver);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ tty_unregister_driver(tty_drv);
+err1:
+ put_tty_driver(tty_drv);
+ return ret;
+}
+
+static void __exit sdio_uart_exit(void)
+{
+ sdio_unregister_driver(&sdio_uart_driver);
+ tty_unregister_driver(sdio_uart_tty_driver);
+ put_tty_driver(sdio_uart_tty_driver);
+}
+
+module_init(sdio_uart_init);
+module_exit(sdio_uart_exit);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
index 3fdd08c7f14..4985807257a 100644
--- a/drivers/mmc/core/Makefile
+++ b/drivers/mmc/core/Makefile
@@ -8,5 +8,7 @@ endif
obj-$(CONFIG_MMC) += mmc_core.o
mmc_core-y := core.o sysfs.o bus.o host.o \
- mmc.o mmc_ops.o sd.o sd_ops.o
+ mmc.o mmc_ops.o sd.o sd_ops.o \
+ sdio.o sdio_ops.o sdio_bus.o \
+ sdio_cis.o sdio_io.o sdio_irq.o
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 817a79462b3..8d6f6014870 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -19,6 +19,7 @@
#include "sysfs.h"
#include "core.h"
+#include "sdio_cis.h"
#include "bus.h"
#define dev_to_mmc_card(d) container_of(d, struct mmc_card, dev)
@@ -34,6 +35,8 @@ static ssize_t mmc_type_show(struct device *dev,
return sprintf(buf, "MMC\n");
case MMC_TYPE_SD:
return sprintf(buf, "SD\n");
+ case MMC_TYPE_SDIO:
+ return sprintf(buf, "SDIO\n");
default:
return -EFAULT;
}
@@ -59,28 +62,34 @@ mmc_bus_uevent(struct device *dev, char **envp, int num_envp, char *buf,
int buf_size)
{
struct mmc_card *card = dev_to_mmc_card(dev);
- int retval = 0, i = 0, length = 0;
-
-#define add_env(fmt,val) do { \
- retval = add_uevent_var(envp, num_envp, &i, \
- buf, buf_size, &length, \
- fmt, val); \
- if (retval) \
- return retval; \
-} while (0);
+ const char *type;
+ int i = 0, length = 0;
switch (card->type) {
case MMC_TYPE_MMC:
- add_env("MMC_TYPE=%s", "MMC");
+ type = "MMC";
break;
case MMC_TYPE_SD:
- add_env("MMC_TYPE=%s", "SD");
+ type = "SD";
+ break;
+ case MMC_TYPE_SDIO:
+ type = "SDIO";
break;
+ default:
+ type = NULL;
}
- add_env("MMC_NAME=%s", mmc_card_name(card));
+ if (type) {
+ if (add_uevent_var(envp, num_envp, &i,
+ buf, buf_size, &length,
+ "MMC_TYPE=%s", type))
+ return -ENOMEM;
+ }
-#undef add_env
+ if (add_uevent_var(envp, num_envp, &i,
+ buf, buf_size, &length,
+ "MMC_NAME=%s", mmc_card_name(card)))
+ return -ENOMEM;
envp[i] = NULL;
@@ -176,6 +185,11 @@ static void mmc_release_card(struct device *dev)
{
struct mmc_card *card = dev_to_mmc_card(dev);
+ sdio_free_common_cis(card);
+
+ if (card->info)
+ kfree(card->info);
+
kfree(card);
}
@@ -221,15 +235,25 @@ int mmc_add_card(struct mmc_card *card)
if (mmc_card_blockaddr(card))
type = "SDHC";
break;
+ case MMC_TYPE_SDIO:
+ type = "SDIO";
+ break;
default:
type = "?";
break;
}
- printk(KERN_INFO "%s: new %s%s card at address %04x\n",
- mmc_hostname(card->host),
- mmc_card_highspeed(card) ? "high speed " : "",
- type, card->rca);
+ if (mmc_host_is_spi(card->host)) {
+ printk(KERN_INFO "%s: new %s%s card on SPI\n",
+ mmc_hostname(card->host),
+ mmc_card_highspeed(card) ? "high speed " : "",
+ type);
+ } else {
+ printk(KERN_INFO "%s: new %s%s card at address %04x\n",
+ mmc_hostname(card->host),
+ mmc_card_highspeed(card) ? "high speed " : "",
+ type, card->rca);
+ }
card->dev.uevent_suppress = 1;
@@ -261,8 +285,13 @@ int mmc_add_card(struct mmc_card *card)
void mmc_remove_card(struct mmc_card *card)
{
if (mmc_card_present(card)) {
- printk(KERN_INFO "%s: card %04x removed\n",
- mmc_hostname(card->host), card->rca);
+ if (mmc_host_is_spi(card->host)) {
+ printk(KERN_INFO "%s: SPI card removed\n",
+ mmc_hostname(card->host));
+ } else {
+ printk(KERN_INFO "%s: card %04x removed\n",
+ mmc_hostname(card->host), card->rca);
+ }
if (card->host->bus_ops->sysfs_remove)
card->host->bus_ops->sysfs_remove(card->host, card);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index bfd2ae5bd66..09435e0ec68 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/pagemap.h>
#include <linux/err.h>
+#include <linux/leds.h>
#include <asm/scatterlist.h>
#include <linux/scatterlist.h>
@@ -29,16 +30,27 @@
#include "core.h"
#include "bus.h"
#include "host.h"
+#include "sdio_bus.h"
#include "mmc_ops.h"
#include "sd_ops.h"
+#include "sdio_ops.h"
extern int mmc_attach_mmc(struct mmc_host *host, u32 ocr);
extern int mmc_attach_sd(struct mmc_host *host, u32 ocr);
+extern int mmc_attach_sdio(struct mmc_host *host, u32 ocr);
static struct workqueue_struct *workqueue;
/*
+ * Enabling software CRCs on the data blocks can be a significant (30%)
+ * performance cost, and for other reasons may not always be desired.
+ * So we allow it it to be disabled.
+ */
+int use_spi_crc = 1;
+module_param(use_spi_crc, bool, 0);
+
+/*
* Internal function. Schedule delayed work in the MMC work queue.
*/
static int mmc_schedule_delayed_work(struct delayed_work *work,
@@ -68,6 +80,11 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
struct mmc_command *cmd = mrq->cmd;
int err = cmd->error;
+ if (err && cmd->retries && mmc_host_is_spi(host)) {
+ if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
+ cmd->retries = 0;
+ }
+
if (err && cmd->retries) {
pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
mmc_hostname(host), cmd->opcode, err);
@@ -76,6 +93,8 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
cmd->error = 0;
host->ops->request(host, mrq);
} else {
+ led_trigger_event(host->led, LED_OFF);
+
pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
mmc_hostname(host), cmd->opcode, err,
cmd->resp[0], cmd->resp[1],
@@ -118,7 +137,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
"tsac %d ms nsac %d\n",
mmc_hostname(host), mrq->data->blksz,
mrq->data->blocks, mrq->data->flags,
- mrq->data->timeout_ns / 10000000,
+ mrq->data->timeout_ns / 1000000,
mrq->data->timeout_clks);
}
@@ -130,6 +149,8 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
WARN_ON(!host->claimed);
+ led_trigger_event(host->led, LED_FULL);
+
mrq->cmd->error = 0;
mrq->cmd->mrq = mrq;
if (mrq->data) {
@@ -199,7 +220,7 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries
{
struct mmc_request mrq;
- BUG_ON(!host->claimed);
+ WARN_ON(!host->claimed);
memset(&mrq, 0, sizeof(struct mmc_request));
@@ -220,17 +241,24 @@ EXPORT_SYMBOL(mmc_wait_for_cmd);
* mmc_set_data_timeout - set the timeout for a data command
* @data: data phase for command
* @card: the MMC card associated with the data transfer
- * @write: flag to differentiate reads from writes
*
* Computes the data timeout parameters according to the
* correct algorithm given the card type.
*/
-void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card,
- int write)
+void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
{
unsigned int mult;
/*
+ * SDIO cards only define an upper 1 s limit on access.
+ */
+ if (mmc_card_sdio(card)) {
+ data->timeout_ns = 1000000000;
+ data->timeout_clks = 0;
+ return;
+ }
+
+ /*
* SD cards use a 100 multiplier rather than 10
*/
mult = mmc_card_sd(card) ? 100 : 10;
@@ -239,7 +267,7 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card,
* Scale up the multiplier (and therefore the timeout) by
* the r2w factor for writes.
*/
- if (write)
+ if (data->flags & MMC_DATA_WRITE)
mult <<= card->csd.r2w_factor;
data->timeout_ns = card->csd.tacc_ns * mult;
@@ -255,7 +283,7 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card,
timeout_us += data->timeout_clks * 1000 /
(card->host->ios.clock / 1000);
- if (write)
+ if (data->flags & MMC_DATA_WRITE)
limit_us = 250000;
else
limit_us = 100000;
@@ -272,15 +300,20 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card,
EXPORT_SYMBOL(mmc_set_data_timeout);
/**
- * mmc_claim_host - exclusively claim a host
+ * __mmc_claim_host - exclusively claim a host
* @host: mmc host to claim
+ * @abort: whether or not the operation should be aborted
*
- * Claim a host for a set of operations.
+ * Claim a host for a set of operations. If @abort is non null and
+ * dereference a non-zero value then this will return prematurely with
+ * that non-zero value without acquiring the lock. Returns zero
+ * with the lock held otherwise.
*/
-void mmc_claim_host(struct mmc_host *host)
+int __mmc_claim_host(struct mmc_host *host, atomic_t *abort)
{
DECLARE_WAITQUEUE(wait, current);
unsigned long flags;
+ int stop;
might_sleep();
@@ -288,19 +321,24 @@ void mmc_claim_host(struct mmc_host *host)
spin_lock_irqsave(&host->lock, flags);
while (1) {
set_current_state(TASK_UNINTERRUPTIBLE);
- if (!host->claimed)
+ stop = abort ? atomic_read(abort) : 0;
+ if (stop || !host->claimed)
break;
spin_unlock_irqrestore(&host->lock, flags);
schedule();
spin_lock_irqsave(&host->lock, flags);
}
set_current_state(TASK_RUNNING);
- host->claimed = 1;
+ if (!stop)
+ host->claimed = 1;
+ else
+ wake_up(&host->wq);
spin_unlock_irqrestore(&host->lock, flags);
remove_wait_queue(&host->wq, &wait);
+ return stop;
}
-EXPORT_SYMBOL(mmc_claim_host);
+EXPORT_SYMBOL(__mmc_claim_host);
/**
* mmc_release_host - release a host
@@ -313,7 +351,7 @@ void mmc_release_host(struct mmc_host *host)
{
unsigned long flags;
- BUG_ON(!host->claimed);
+ WARN_ON(!host->claimed);
spin_lock_irqsave(&host->lock, flags);
host->claimed = 0;
@@ -433,19 +471,32 @@ static void mmc_power_up(struct mmc_host *host)
int bit = fls(host->ocr_avail) - 1;
host->ios.vdd = bit;
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
- host->ios.chip_select = MMC_CS_DONTCARE;
+ if (mmc_host_is_spi(host)) {
+ host->ios.chip_select = MMC_CS_HIGH;
+ host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
+ } else {
+ host->ios.chip_select = MMC_CS_DONTCARE;
+ host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
+ }
host->ios.power_mode = MMC_POWER_UP;
host->ios.bus_width = MMC_BUS_WIDTH_1;
host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
- mmc_delay(1);
+ /*
+ * This delay should be sufficient to allow the power supply
+ * to reach the minimum voltage.
+ */
+ mmc_delay(2);
host->ios.clock = host->f_min;
host->ios.power_mode = MMC_POWER_ON;
mmc_set_ios(host);
+ /*
+ * This delay must be at least 74 clock sizes, or 1 ms, or the
+ * time required to reach a stable voltage.
+ */
mmc_delay(2);
}
@@ -453,8 +504,10 @@ static void mmc_power_off(struct mmc_host *host)
{
host->ios.clock = 0;
host->ios.vdd = 0;
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
- host->ios.chip_select = MMC_CS_DONTCARE;
+ if (!mmc_host_is_spi(host)) {
+ host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
+ host->ios.chip_select = MMC_CS_DONTCARE;
+ }
host->ios.power_mode = MMC_POWER_OFF;
host->ios.bus_width = MMC_BUS_WIDTH_1;
host->ios.timing = MMC_TIMING_LEGACY;
@@ -511,7 +564,7 @@ void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops)
BUG_ON(!host);
BUG_ON(!ops);
- BUG_ON(!host->claimed);
+ WARN_ON(!host->claimed);
spin_lock_irqsave(&host->lock, flags);
@@ -535,8 +588,8 @@ void mmc_detach_bus(struct mmc_host *host)
BUG_ON(!host);
- BUG_ON(!host->claimed);
- BUG_ON(!host->bus_ops);
+ WARN_ON(!host->claimed);
+ WARN_ON(!host->bus_ops);
spin_lock_irqsave(&host->lock, flags);
@@ -564,7 +617,7 @@ void mmc_detect_change(struct mmc_host *host, unsigned long delay)
#ifdef CONFIG_MMC_DEBUG
unsigned long flags;
spin_lock_irqsave(&host->lock, flags);
- BUG_ON(host->removed);
+ WARN_ON(host->removed);
spin_unlock_irqrestore(&host->lock, flags);
#endif
@@ -597,24 +650,38 @@ void mmc_rescan(struct work_struct *work)
mmc_send_if_cond(host, host->ocr_avail);
+ /*
+ * First we search for SDIO...
+ */
+ err = mmc_send_io_op_cond(host, 0, &ocr);
+ if (!err) {
+ if (mmc_attach_sdio(host, ocr))
+ mmc_power_off(host);
+ return;
+ }
+
+ /*
+ * ...then normal SD...
+ */
err = mmc_send_app_op_cond(host, 0, &ocr);
- if (err == MMC_ERR_NONE) {
+ if (!err) {
if (mmc_attach_sd(host, ocr))
mmc_power_off(host);
- } else {
- /*
- * If we fail to detect any SD cards then try
- * searching for MMC cards.
- */
- err = mmc_send_op_cond(host, 0, &ocr);
- if (err == MMC_ERR_NONE) {
- if (mmc_attach_mmc(host, ocr))
- mmc_power_off(host);
- } else {
+ return;
+ }
+
+ /*
+ * ...and finally MMC.
+ */
+ err = mmc_send_op_cond(host, 0, &ocr);
+ if (!err) {
+ if (mmc_attach_mmc(host, ocr))
mmc_power_off(host);
- mmc_release_host(host);
- }
+ return;
}
+
+ mmc_release_host(host);
+ mmc_power_off(host);
} else {
if (host->bus_ops->detect && !host->bus_dead)
host->bus_ops->detect(host);
@@ -725,22 +792,38 @@ static int __init mmc_init(void)
return -ENOMEM;
ret = mmc_register_bus();
- if (ret == 0) {
- ret = mmc_register_host_class();
- if (ret)
- mmc_unregister_bus();
- }
+ if (ret)
+ goto destroy_workqueue;
+
+ ret = mmc_register_host_class();
+ if (ret)
+ goto unregister_bus;
+
+ ret = sdio_register_bus();
+ if (ret)
+ goto unregister_host_class;
+
+ return 0;
+
+unregister_host_class:
+ mmc_unregister_host_class();
+unregister_bus:
+ mmc_unregister_bus();
+destroy_workqueue:
+ destroy_workqueue(workqueue);
+
return ret;
}
static void __exit mmc_exit(void)
{
+ sdio_unregister_bus();
mmc_unregister_host_class();
mmc_unregister_bus();
destroy_workqueue(workqueue);
}
-module_init(mmc_init);
+subsys_initcall(mmc_init);
module_exit(mmc_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index bb2774af9ea..39daf2fb5dc 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -48,5 +48,7 @@ void mmc_rescan(struct work_struct *work);
void mmc_start_host(struct mmc_host *host);
void mmc_stop_host(struct mmc_host *host);
+extern int use_spi_crc;
+
#endif
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 2c7ce8f43a9..64fbc9759a3 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -15,6 +15,7 @@
#include <linux/err.h>
#include <linux/idr.h>
#include <linux/pagemap.h>
+#include <linux/leds.h>
#include <linux/mmc/host.h>
@@ -100,6 +101,9 @@ int mmc_add_host(struct mmc_host *host)
{
int err;
+ WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) &&
+ !host->ops->enable_sdio_irq);
+
if (!idr_pre_get(&mmc_host_idr, GFP_KERNEL))
return -ENOMEM;
@@ -112,6 +116,8 @@ int mmc_add_host(struct mmc_host *host)
snprintf(host->class_dev.bus_id, BUS_ID_SIZE,
"mmc%d", host->index);
+ led_trigger_register_simple(host->class_dev.bus_id, &host->led);
+
err = device_add(&host->class_dev);
if (err)
return err;
@@ -137,6 +143,8 @@ void mmc_remove_host(struct mmc_host *host)
device_del(&host->class_dev);
+ led_trigger_unregister(host->led);
+
spin_lock(&mmc_host_lock);
idr_remove(&mmc_host_idr, host->index);
spin_unlock(&mmc_host_lock);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 21d7f48e1d4..65fe28860f5 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -161,13 +161,12 @@ static int mmc_read_ext_csd(struct mmc_card *card)
{
int err;
u8 *ext_csd;
+ unsigned int ext_csd_struct;
BUG_ON(!card);
- err = MMC_ERR_FAILED;
-
if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
- return MMC_ERR_NONE;
+ return 0;
/*
* As the ext_csd is so large and mostly unused, we don't store the
@@ -176,13 +175,19 @@ static int mmc_read_ext_csd(struct mmc_card *card)
ext_csd = kmalloc(512, GFP_KERNEL);
if (!ext_csd) {
printk(KERN_ERR "%s: could not allocate a buffer to "
- "receive the ext_csd. mmc v4 cards will be "
- "treated as v3.\n", mmc_hostname(card->host));
- return MMC_ERR_FAILED;
+ "receive the ext_csd.\n", mmc_hostname(card->host));
+ return -ENOMEM;
}
err = mmc_send_ext_csd(card, ext_csd);
- if (err != MMC_ERR_NONE) {
+ if (err) {
+ /*
+ * We all hosts that cannot perform the command
+ * to fail more gracefully
+ */
+ if (err != -EINVAL)
+ goto out;
+
/*
* High capacity cards should have this "magic" size
* stored in their CSD.
@@ -197,18 +202,29 @@ static int mmc_read_ext_csd(struct mmc_card *card)
"EXT_CSD, performance might "
"suffer.\n",
mmc_hostname(card->host));
- err = MMC_ERR_NONE;
+ err = 0;
}
+
goto out;
}
- card->ext_csd.sectors =
- ext_csd[EXT_CSD_SEC_CNT + 0] << 0 |
- ext_csd[EXT_CSD_SEC_CNT + 1] << 8 |
- ext_csd[EXT_CSD_SEC_CNT + 2] << 16 |
- ext_csd[EXT_CSD_SEC_CNT + 3] << 24;
- if (card->ext_csd.sectors)
- mmc_card_set_blockaddr(card);
+ ext_csd_struct = ext_csd[EXT_CSD_REV];
+ if (ext_csd_struct > 2) {
+ printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
+ "version %d\n", mmc_hostname(card->host),
+ ext_csd_struct);
+ return -EINVAL;
+ }
+
+ if (ext_csd_struct >= 2) {
+ card->ext_csd.sectors =
+ ext_csd[EXT_CSD_SEC_CNT + 0] << 0 |
+ ext_csd[EXT_CSD_SEC_CNT + 1] << 8 |
+ ext_csd[EXT_CSD_SEC_CNT + 2] << 16 |
+ ext_csd[EXT_CSD_SEC_CNT + 3] << 24;
+ if (card->ext_csd.sectors)
+ mmc_card_set_blockaddr(card);
+ }
switch (ext_csd[EXT_CSD_CARD_TYPE]) {
case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
@@ -246,7 +262,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
unsigned int max_dtr;
BUG_ON(!host);
- BUG_ON(!host->claimed);
+ WARN_ON(!host->claimed);
/*
* Since we're changing the OCR value, we seem to
@@ -258,19 +274,33 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
/* The extra bit indicates that we support high capacity */
err = mmc_send_op_cond(host, ocr | (1 << 30), NULL);
- if (err != MMC_ERR_NONE)
+ if (err)
goto err;
/*
+ * For SPI, enable CRC as appropriate.
+ */
+ if (mmc_host_is_spi(host)) {
+ err = mmc_spi_set_crc(host, use_spi_crc);
+ if (err)
+ goto err;
+ }
+
+ /*
* Fetch CID from card.
*/
- err = mmc_all_send_cid(host, cid);
- if (err != MMC_ERR_NONE)
+ if (mmc_host_is_spi(host))
+ err = mmc_send_cid(host, cid);
+ else
+ err = mmc_all_send_cid(host, cid);
+ if (err)
goto err;
if (oldcard) {
- if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0)
+ if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) {
+ err = -ENOENT;
goto err;
+ }
card = oldcard;
} else {
@@ -278,8 +308,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
* Allocate card structure.
*/
card = mmc_alloc_card(host);
- if (IS_ERR(card))
+ if (IS_ERR(card)) {
+ err = PTR_ERR(card);
goto err;
+ }
card->type = MMC_TYPE_MMC;
card->rca = 1;
@@ -287,43 +319,47 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
}
/*
- * Set card RCA.
+ * For native busses: set card RCA and quit open drain mode.
*/
- err = mmc_set_relative_addr(card);
- if (err != MMC_ERR_NONE)
- goto free_card;
+ if (!mmc_host_is_spi(host)) {
+ err = mmc_set_relative_addr(card);
+ if (err)
+ goto free_card;
- mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+ mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+ }
if (!oldcard) {
/*
* Fetch CSD from card.
*/
err = mmc_send_csd(card, card->raw_csd);
- if (err != MMC_ERR_NONE)
+ if (err)
goto free_card;
err = mmc_decode_csd(card);
- if (err < 0)
+ if (err)
goto free_card;
err = mmc_decode_cid(card);
- if (err < 0)
+ if (err)
goto free_card;
}
/*
* Select card, as all following commands rely on that.
*/
- err = mmc_select_card(card);
- if (err != MMC_ERR_NONE)
- goto free_card;
+ if (!mmc_host_is_spi(host)) {
+ err = mmc_select_card(card);
+ if (err)
+ goto free_card;
+ }
if (!oldcard) {
/*
- * Fetch and process extened CSD.
+ * Fetch and process extended CSD.
*/
err = mmc_read_ext_csd(card);
- if (err != MMC_ERR_NONE)
+ if (err)
goto free_card;
}
@@ -334,7 +370,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
(host->caps & MMC_CAP_MMC_HIGHSPEED)) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, 1);
- if (err != MMC_ERR_NONE)
+ if (err)
goto free_card;
mmc_card_set_highspeed(card);
@@ -363,7 +399,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
(host->caps & MMC_CAP_4_BIT_DATA)) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH, EXT_CSD_BUS_WIDTH_4);
- if (err != MMC_ERR_NONE)
+ if (err)
goto free_card;
mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
@@ -372,14 +408,14 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
if (!oldcard)
host->card = card;
- return MMC_ERR_NONE;
+ return 0;
free_card:
if (!oldcard)
mmc_remove_card(card);
err:
- return MMC_ERR_FAILED;
+ return err;
}
/*
@@ -413,7 +449,7 @@ static void mmc_detect(struct mmc_host *host)
mmc_release_host(host);
- if (err != MMC_ERR_NONE) {
+ if (err) {
mmc_remove(host);
mmc_claim_host(host);
@@ -480,7 +516,8 @@ static void mmc_suspend(struct mmc_host *host)
BUG_ON(!host->card);
mmc_claim_host(host);
- mmc_deselect_cards(host);
+ if (!mmc_host_is_spi(host))
+ mmc_deselect_cards(host);
host->card->state &= ~MMC_STATE_HIGHSPEED;
mmc_release_host(host);
}
@@ -502,7 +539,7 @@ static void mmc_resume(struct mmc_host *host)
err = mmc_init_card(host, host->ocr, host->card);
mmc_release_host(host);
- if (err != MMC_ERR_NONE) {
+ if (err) {
mmc_remove(host);
mmc_claim_host(host);
@@ -536,11 +573,20 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr)
int err;
BUG_ON(!host);
- BUG_ON(!host->claimed);
+ WARN_ON(!host->claimed);
mmc_attach_bus(host, &mmc_ops);
/*
+ * We need to get OCR a different way for SPI.
+ */
+ if (mmc_host_is_spi(host)) {
+ err = mmc_spi_read_ocr(host, 1, &ocr);
+ if (err)
+ goto err;
+ }
+
+ /*
* Sanity check the voltages that the card claims to
* support.
*/
@@ -565,7 +611,7 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr)
* Detect and init the card.
*/
err = mmc_init_card(host, host->ocr, NULL);
- if (err != MMC_ERR_NONE)
+ if (err)
goto err;
mmc_release_host(host);
@@ -587,6 +633,6 @@ err:
printk(KERN_ERR "%s: error %d whilst initialising MMC card\n",
mmc_hostname(host), err);
- return 0;
+ return err;
}
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 913e75f0084..bf4bc6adcfe 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -40,10 +40,10 @@ static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
}
err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
- if (err != MMC_ERR_NONE)
+ if (err)
return err;
- return MMC_ERR_NONE;
+ return 0;
}
int mmc_select_card(struct mmc_card *card)
@@ -63,23 +63,36 @@ int mmc_go_idle(struct mmc_host *host)
int err;
struct mmc_command cmd;
- mmc_set_chip_select(host, MMC_CS_HIGH);
-
- mmc_delay(1);
+ /*
+ * Non-SPI hosts need to prevent chipselect going active during
+ * GO_IDLE; that would put chips into SPI mode. Remind them of
+ * that in case of hardware that won't pull up DAT3/nCS otherwise.
+ *
+ * SPI hosts ignore ios.chip_select; it's managed according to
+ * rules that must accomodate non-MMC slaves which this layer
+ * won't even know about.
+ */
+ if (!mmc_host_is_spi(host)) {
+ mmc_set_chip_select(host, MMC_CS_HIGH);
+ mmc_delay(1);
+ }
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = MMC_GO_IDLE_STATE;
cmd.arg = 0;
- cmd.flags = MMC_RSP_NONE | MMC_CMD_BC;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
err = mmc_wait_for_cmd(host, &cmd, 0);
mmc_delay(1);
- mmc_set_chip_select(host, MMC_CS_DONTCARE);
+ if (!mmc_host_is_spi(host)) {
+ mmc_set_chip_select(host, MMC_CS_DONTCARE);
+ mmc_delay(1);
+ }
- mmc_delay(1);
+ host->use_spi_crc = 0;
return err;
}
@@ -94,23 +107,33 @@ int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = MMC_SEND_OP_COND;
- cmd.arg = ocr;
- cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
+ cmd.arg = mmc_host_is_spi(host) ? 0 : ocr;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
for (i = 100; i; i--) {
err = mmc_wait_for_cmd(host, &cmd, 0);
- if (err != MMC_ERR_NONE)
+ if (err)
break;
- if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
+ /* if we're just probing, do a single pass */
+ if (ocr == 0)
break;
- err = MMC_ERR_TIMEOUT;
+ /* otherwise wait until reset completes */
+ if (mmc_host_is_spi(host)) {
+ if (!(cmd.resp[0] & R1_SPI_IDLE))
+ break;
+ } else {
+ if (cmd.resp[0] & MMC_CARD_BUSY)
+ break;
+ }
+
+ err = -ETIMEDOUT;
mmc_delay(10);
}
- if (rocr)
+ if (rocr && !mmc_host_is_spi(host))
*rocr = cmd.resp[0];
return err;
@@ -131,12 +154,12 @@ int mmc_all_send_cid(struct mmc_host *host, u32 *cid)
cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
- if (err != MMC_ERR_NONE)
+ if (err)
return err;
memcpy(cid, cmd.resp, sizeof(u32) * 4);
- return MMC_ERR_NONE;
+ return 0;
}
int mmc_set_relative_addr(struct mmc_card *card)
@@ -154,46 +177,52 @@ int mmc_set_relative_addr(struct mmc_card *card)
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
- if (err != MMC_ERR_NONE)
+ if (err)
return err;
- return MMC_ERR_NONE;
+ return 0;
}
-int mmc_send_csd(struct mmc_card *card, u32 *csd)
+static int
+mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode)
{
int err;
struct mmc_command cmd;
- BUG_ON(!card);
- BUG_ON(!card->host);
- BUG_ON(!csd);
+ BUG_ON(!host);
+ BUG_ON(!cxd);
memset(&cmd, 0, sizeof(struct mmc_command));
- cmd.opcode = MMC_SEND_CSD;
- cmd.arg = card->rca << 16;
+ cmd.opcode = opcode;
+ cmd.arg = arg;
cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
- err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
- if (err != MMC_ERR_NONE)
+ err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+ if (err)
return err;
- memcpy(csd, cmd.resp, sizeof(u32) * 4);
+ memcpy(cxd, cmd.resp, sizeof(u32) * 4);
- return MMC_ERR_NONE;
+ return 0;
}
-int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
+static int
+mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
+ u32 opcode, void *buf, unsigned len)
{
struct mmc_request mrq;
struct mmc_command cmd;
struct mmc_data data;
struct scatterlist sg;
+ void *data_buf;
- BUG_ON(!card);
- BUG_ON(!card->host);
- BUG_ON(!ext_csd);
+ /* dma onto stack is unsafe/nonportable, but callers to this
+ * routine normally provide temporary on-stack buffers ...
+ */
+ data_buf = kmalloc(len, GFP_KERNEL);
+ if (data_buf == NULL)
+ return -ENOMEM;
memset(&mrq, 0, sizeof(struct mmc_request));
memset(&cmd, 0, sizeof(struct mmc_command));
@@ -202,28 +231,99 @@ int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
mrq.cmd = &cmd;
mrq.data = &data;
- cmd.opcode = MMC_SEND_EXT_CSD;
+ cmd.opcode = opcode;
cmd.arg = 0;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
- data.blksz = 512;
+ /* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we
+ * rely on callers to never use this with "native" calls for reading
+ * CSD or CID. Native versions of those commands use the R2 type,
+ * not R1 plus a data block.
+ */
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = len;
data.blocks = 1;
data.flags = MMC_DATA_READ;
data.sg = &sg;
data.sg_len = 1;
- sg_init_one(&sg, ext_csd, 512);
+ sg_init_one(&sg, data_buf, len);
- mmc_set_data_timeout(&data, card, 0);
+ if (card)
+ mmc_set_data_timeout(&data, card);
- mmc_wait_for_req(card->host, &mrq);
+ mmc_wait_for_req(host, &mrq);
- if (cmd.error != MMC_ERR_NONE)
+ memcpy(buf, data_buf, len);
+ kfree(data_buf);
+
+ if (cmd.error)
return cmd.error;
- if (data.error != MMC_ERR_NONE)
+ if (data.error)
return data.error;
- return MMC_ERR_NONE;
+ return 0;
+}
+
+int mmc_send_csd(struct mmc_card *card, u32 *csd)
+{
+ if (!mmc_host_is_spi(card->host))
+ return mmc_send_cxd_native(card->host, card->rca << 16,
+ csd, MMC_SEND_CSD);
+
+ return mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd, 16);
+}
+
+int mmc_send_cid(struct mmc_host *host, u32 *cid)
+{
+ if (!mmc_host_is_spi(host)) {
+ if (!host->card)
+ return -EINVAL;
+ return mmc_send_cxd_native(host, host->card->rca << 16,
+ cid, MMC_SEND_CID);
+ }
+
+ return mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid, 16);
+}
+
+int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
+{
+ return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD,
+ ext_csd, 512);
+}
+
+int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
+{
+ struct mmc_command cmd;
+ int err;
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SPI_READ_OCR;
+ cmd.arg = highcap ? (1 << 30) : 0;
+ cmd.flags = MMC_RSP_SPI_R3;
+
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+
+ *ocrp = cmd.resp[1];
+ return err;
+}
+
+int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
+{
+ struct mmc_command cmd;
+ int err;
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SPI_CRC_ON_OFF;
+ cmd.flags = MMC_RSP_SPI_R1;
+ cmd.arg = use_crc;
+
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+ if (!err)
+ host->use_spi_crc = use_crc;
+ return err;
}
int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value)
@@ -241,13 +341,13 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value)
(index << 16) |
(value << 8) |
set;
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
- if (err != MMC_ERR_NONE)
+ if (err)
return err;
- return MMC_ERR_NONE;
+ return 0;
}
int mmc_send_status(struct mmc_card *card, u32 *status)
@@ -261,16 +361,20 @@ int mmc_send_status(struct mmc_card *card, u32 *status)
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = MMC_SEND_STATUS;
- cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ if (!mmc_host_is_spi(card->host))
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
- if (err != MMC_ERR_NONE)
+ if (err)
return err;
+ /* NOTE: callers are required to understand the difference
+ * between "native" and SPI format status words!
+ */
if (status)
*status = cmd.resp[0];
- return MMC_ERR_NONE;
+ return 0;
}
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index 76d09a93c5d..17854bf7cf0 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -22,6 +22,9 @@ int mmc_send_csd(struct mmc_card *card, u32 *csd);
int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value);
int mmc_send_status(struct mmc_card *card, u32 *status);
+int mmc_send_cid(struct mmc_host *host, u32 *cid);
+int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);
+int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
#endif
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 1edc62b1e5c..d1c1e0f592f 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -166,8 +166,6 @@ static int mmc_decode_scr(struct mmc_card *card)
unsigned int scr_struct;
u32 resp[4];
- BUG_ON(!mmc_card_sd(card));
-
resp[3] = card->raw_scr[1];
resp[2] = card->raw_scr[0];
@@ -193,30 +191,38 @@ static int mmc_read_switch(struct mmc_card *card)
u8 *status;
if (card->scr.sda_vsn < SCR_SPEC_VER_1)
- return MMC_ERR_NONE;
+ return 0;
if (!(card->csd.cmdclass & CCC_SWITCH)) {
printk(KERN_WARNING "%s: card lacks mandatory switch "
"function, performance might suffer.\n",
mmc_hostname(card->host));
- return MMC_ERR_NONE;
+ return 0;
}
- err = MMC_ERR_FAILED;
+ err = -EIO;
status = kmalloc(64, GFP_KERNEL);
if (!status) {
printk(KERN_ERR "%s: could not allocate a buffer for "
"switch capabilities.\n", mmc_hostname(card->host));
- return err;
+ return -ENOMEM;
}
err = mmc_sd_switch(card, 0, 0, 1, status);
- if (err != MMC_ERR_NONE) {
+ if (err) {
+ /*
+ * We all hosts that cannot perform the command
+ * to fail more gracefully
+ */
+ if (err != -EINVAL)
+ goto out;
+
printk(KERN_WARNING "%s: problem reading switch "
"capabilities, performance might suffer.\n",
mmc_hostname(card->host));
- err = MMC_ERR_NONE;
+ err = 0;
+
goto out;
}
@@ -238,28 +244,28 @@ static int mmc_switch_hs(struct mmc_card *card)
u8 *status;
if (card->scr.sda_vsn < SCR_SPEC_VER_1)
- return MMC_ERR_NONE;
+ return 0;
if (!(card->csd.cmdclass & CCC_SWITCH))
- return MMC_ERR_NONE;
+ return 0;
if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED))
- return MMC_ERR_NONE;
+ return 0;
if (card->sw_caps.hs_max_dtr == 0)
- return MMC_ERR_NONE;
+ return 0;
- err = MMC_ERR_FAILED;
+ err = -EIO;
status = kmalloc(64, GFP_KERNEL);
if (!status) {
printk(KERN_ERR "%s: could not allocate a buffer for "
"switch capabilities.\n", mmc_hostname(card->host));
- return err;
+ return -ENOMEM;
}
err = mmc_sd_switch(card, 1, 0, 1, status);
- if (err != MMC_ERR_NONE)
+ if (err)
goto out;
if ((status[16] & 0xF) != 1) {
@@ -292,7 +298,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
unsigned int max_dtr;
BUG_ON(!host);
- BUG_ON(!host->claimed);
+ WARN_ON(!host->claimed);
/*
* Since we're changing the OCR value, we seem to
@@ -309,23 +315,37 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
* block-addressed SDHC cards.
*/
err = mmc_send_if_cond(host, ocr);
- if (err == MMC_ERR_NONE)
+ if (!err)
ocr |= 1 << 30;
err = mmc_send_app_op_cond(host, ocr, NULL);
- if (err != MMC_ERR_NONE)
+ if (err)
goto err;
/*
+ * For SPI, enable CRC as appropriate.
+ */
+ if (mmc_host_is_spi(host)) {
+ err = mmc_spi_set_crc(host, use_spi_crc);
+ if (err)
+ goto err;
+ }
+
+ /*
* Fetch CID from card.
*/
- err = mmc_all_send_cid(host, cid);
- if (err != MMC_ERR_NONE)
+ if (mmc_host_is_spi(host))
+ err = mmc_send_cid(host, cid);
+ else
+ err = mmc_all_send_cid(host, cid);
+ if (err)
goto err;
if (oldcard) {
- if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0)
+ if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) {
+ err = -ENOENT;
goto err;
+ }
card = oldcard;
} else {
@@ -333,32 +353,36 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
* Allocate card structure.
*/
card = mmc_alloc_card(host);
- if (IS_ERR(card))
+ if (IS_ERR(card)) {
+ err = PTR_ERR(card);
goto err;
+ }
card->type = MMC_TYPE_SD;
memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
}
/*
- * Set card RCA.
+ * For native busses: get card RCA and quit open drain mode.
*/
- err = mmc_send_relative_addr(host, &card->rca);
- if (err != MMC_ERR_NONE)
- goto free_card;
+ if (!mmc_host_is_spi(host)) {
+ err = mmc_send_relative_addr(host, &card->rca);
+ if (err)
+ goto free_card;
- mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+ mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+ }
if (!oldcard) {
/*
* Fetch CSD from card.
*/
err = mmc_send_csd(card, card->raw_csd);
- if (err != MMC_ERR_NONE)
+ if (err)
goto free_card;
err = mmc_decode_csd(card);
- if (err < 0)
+ if (err)
goto free_card;
mmc_decode_cid(card);
@@ -367,16 +391,18 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
/*
* Select card, as all following commands rely on that.
*/
- err = mmc_select_card(card);
- if (err != MMC_ERR_NONE)
- goto free_card;
+ if (!mmc_host_is_spi(host)) {
+ err = mmc_select_card(card);
+ if (err)
+ goto free_card;
+ }
if (!oldcard) {
/*
* Fetch SCR from card.
*/
err = mmc_app_send_scr(card, card->raw_scr);
- if (err != MMC_ERR_NONE)
+ if (err)
goto free_card;
err = mmc_decode_scr(card);
@@ -387,7 +413,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
* Fetch switch information from card.
*/
err = mmc_read_switch(card);
- if (err != MMC_ERR_NONE)
+ if (err)
goto free_card;
}
@@ -395,7 +421,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
* Attempt to change to high-speed (if supported)
*/
err = mmc_switch_hs(card);
- if (err != MMC_ERR_NONE)
+ if (err)
goto free_card;
/*
@@ -418,7 +444,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
if ((host->caps & MMC_CAP_4_BIT_DATA) &&
(card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
- if (err != MMC_ERR_NONE)
+ if (err)
goto free_card;
mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
@@ -442,14 +468,14 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
if (!oldcard)
host->card = card;
- return MMC_ERR_NONE;
+ return 0;
free_card:
if (!oldcard)
mmc_remove_card(card);
err:
- return MMC_ERR_FAILED;
+ return err;
}
/*
@@ -483,7 +509,7 @@ static void mmc_sd_detect(struct mmc_host *host)
mmc_release_host(host);
- if (err != MMC_ERR_NONE) {
+ if (err) {
mmc_sd_remove(host);
mmc_claim_host(host);
@@ -552,7 +578,8 @@ static void mmc_sd_suspend(struct mmc_host *host)
BUG_ON(!host->card);
mmc_claim_host(host);
- mmc_deselect_cards(host);
+ if (!mmc_host_is_spi(host))
+ mmc_deselect_cards(host);
host->card->state &= ~MMC_STATE_HIGHSPEED;
mmc_release_host(host);
}
@@ -574,7 +601,7 @@ static void mmc_sd_resume(struct mmc_host *host)
err = mmc_sd_init_card(host, host->ocr, host->card);
mmc_release_host(host);
- if (err != MMC_ERR_NONE) {
+ if (err) {
mmc_sd_remove(host);
mmc_claim_host(host);
@@ -608,11 +635,22 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr)
int err;
BUG_ON(!host);
- BUG_ON(!host->claimed);
+ WARN_ON(!host->claimed);
mmc_attach_bus(host, &mmc_sd_ops);
/*
+ * We need to get OCR a different way for SPI.
+ */
+ if (mmc_host_is_spi(host)) {
+ mmc_go_idle(host);
+
+ err = mmc_spi_read_ocr(host, 0, &ocr);
+ if (err)
+ goto err;
+ }
+
+ /*
* Sanity check the voltages that the card claims to
* support.
*/
@@ -644,7 +682,7 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr)
* Detect and init the card.
*/
err = mmc_sd_init_card(host, host->ocr, NULL);
- if (err != MMC_ERR_NONE)
+ if (err)
goto err;
mmc_release_host(host);
@@ -666,6 +704,6 @@ err:
printk(KERN_ERR "%s: error %d whilst initialising SD card\n",
mmc_hostname(host), err);
- return 0;
+ return err;
}
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index 342f340ebc2..ee4029a24ef 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -33,21 +33,21 @@ static int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
if (card) {
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
} else {
cmd.arg = 0;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_BCR;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_BCR;
}
err = mmc_wait_for_cmd(host, &cmd, 0);
- if (err != MMC_ERR_NONE)
+ if (err)
return err;
/* Check that card supported application commands */
- if (!(cmd.resp[0] & R1_APP_CMD))
- return MMC_ERR_FAILED;
+ if (!mmc_host_is_spi(host) && !(cmd.resp[0] & R1_APP_CMD))
+ return -EOPNOTSUPP;
- return MMC_ERR_NONE;
+ return 0;
}
/**
@@ -73,7 +73,7 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card,
BUG_ON(!cmd);
BUG_ON(retries < 0);
- err = MMC_ERR_INVALID;
+ err = -EIO;
/*
* We have to resend MMC_APP_CMD for each attempt so
@@ -83,8 +83,14 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card,
memset(&mrq, 0, sizeof(struct mmc_request));
err = mmc_app_cmd(host, card);
- if (err != MMC_ERR_NONE)
+ if (err) {
+ /* no point in retrying; no APP commands allowed */
+ if (mmc_host_is_spi(host)) {
+ if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
+ break;
+ }
continue;
+ }
memset(&mrq, 0, sizeof(struct mmc_request));
@@ -97,8 +103,14 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card,
mmc_wait_for_req(host, &mrq);
err = cmd->error;
- if (cmd->error == MMC_ERR_NONE)
+ if (!cmd->error)
break;
+
+ /* no point in retrying illegal APP commands */
+ if (mmc_host_is_spi(host)) {
+ if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
+ break;
+ }
}
return err;
@@ -127,14 +139,14 @@ int mmc_app_set_bus_width(struct mmc_card *card, int width)
cmd.arg = SD_BUS_WIDTH_4;
break;
default:
- return MMC_ERR_INVALID;
+ return -EINVAL;
}
err = mmc_wait_for_app_cmd(card->host, card, &cmd, MMC_CMD_RETRIES);
- if (err != MMC_ERR_NONE)
+ if (err)
return err;
- return MMC_ERR_NONE;
+ return 0;
}
int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
@@ -147,23 +159,36 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = SD_APP_OP_COND;
- cmd.arg = ocr;
- cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
+ if (mmc_host_is_spi(host))
+ cmd.arg = ocr & (1 << 30); /* SPI only defines one bit */
+ else
+ cmd.arg = ocr;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
for (i = 100; i; i--) {
err = mmc_wait_for_app_cmd(host, NULL, &cmd, MMC_CMD_RETRIES);
- if (err != MMC_ERR_NONE)
+ if (err)
break;
- if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
+ /* if we're just probing, do a single pass */
+ if (ocr == 0)
break;
- err = MMC_ERR_TIMEOUT;
+ /* otherwise wait until reset completes */
+ if (mmc_host_is_spi(host)) {
+ if (!(cmd.resp[0] & R1_SPI_IDLE))
+ break;
+ } else {
+ if (cmd.resp[0] & MMC_CARD_BUSY)
+ break;
+ }
+
+ err = -ETIMEDOUT;
mmc_delay(10);
}
- if (rocr)
+ if (rocr && !mmc_host_is_spi(host))
*rocr = cmd.resp[0];
return err;
@@ -174,6 +199,7 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
struct mmc_command cmd;
int err;
static const u8 test_pattern = 0xAA;
+ u8 result_pattern;
/*
* To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND
@@ -182,16 +208,21 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
*/
cmd.opcode = SD_SEND_IF_COND;
cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern;
- cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR;
+ cmd.flags = MMC_RSP_SPI_R7 | MMC_RSP_R7 | MMC_CMD_BCR;
err = mmc_wait_for_cmd(host, &cmd, 0);
- if (err != MMC_ERR_NONE)
+ if (err)
return err;
- if ((cmd.resp[0] & 0xFF) != test_pattern)
- return MMC_ERR_FAILED;
+ if (mmc_host_is_spi(host))
+ result_pattern = cmd.resp[1] & 0xFF;
+ else
+ result_pattern = cmd.resp[0] & 0xFF;
+
+ if (result_pattern != test_pattern)
+ return -EIO;
- return MMC_ERR_NONE;
+ return 0;
}
int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca)
@@ -209,12 +240,12 @@ int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca)
cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR;
err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
- if (err != MMC_ERR_NONE)
+ if (err)
return err;
*rca = cmd.resp[0] >> 16;
- return MMC_ERR_NONE;
+ return 0;
}
int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
@@ -229,8 +260,10 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
BUG_ON(!card->host);
BUG_ON(!scr);
+ /* NOTE: caller guarantees scr is heap-allocated */
+
err = mmc_app_cmd(card->host, card);
- if (err != MMC_ERR_NONE)
+ if (err)
return err;
memset(&mrq, 0, sizeof(struct mmc_request));
@@ -242,7 +275,7 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
cmd.opcode = SD_APP_SEND_SCR;
cmd.arg = 0;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
data.blksz = 8;
data.blocks = 1;
@@ -252,19 +285,19 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
sg_init_one(&sg, scr, 8);
- mmc_set_data_timeout(&data, card, 0);
+ mmc_set_data_timeout(&data, card);
mmc_wait_for_req(card->host, &mrq);
- if (cmd.error != MMC_ERR_NONE)
+ if (cmd.error)
return cmd.error;
- if (data.error != MMC_ERR_NONE)
+ if (data.error)
return data.error;
scr[0] = ntohl(scr[0]);
scr[1] = ntohl(scr[1]);
- return MMC_ERR_NONE;
+ return 0;
}
int mmc_sd_switch(struct mmc_card *card, int mode, int group,
@@ -278,6 +311,8 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group,
BUG_ON(!card);
BUG_ON(!card->host);
+ /* NOTE: caller guarantees resp is heap-allocated */
+
mode = !!mode;
value &= 0xF;
@@ -292,7 +327,7 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group,
cmd.arg = mode << 31 | 0x00FFFFFF;
cmd.arg &= ~(0xF << (group * 4));
cmd.arg |= value << (group * 4);
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
data.blksz = 64;
data.blocks = 1;
@@ -302,15 +337,15 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group,
sg_init_one(&sg, resp, 64);
- mmc_set_data_timeout(&data, card, 0);
+ mmc_set_data_timeout(&data, card);
mmc_wait_for_req(card->host, &mrq);
- if (cmd.error != MMC_ERR_NONE)
+ if (cmd.error)
return cmd.error;
- if (data.error != MMC_ERR_NONE)
+ if (data.error)
return data.error;
- return MMC_ERR_NONE;
+ return 0;
}
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
new file mode 100644
index 00000000000..87a50f456ef
--- /dev/null
+++ b/drivers/mmc/core/sdio.c
@@ -0,0 +1,395 @@
+/*
+ * linux/drivers/mmc/sdio.c
+ *
+ * Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/err.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "core.h"
+#include "bus.h"
+#include "sdio_bus.h"
+#include "mmc_ops.h"
+#include "sd_ops.h"
+#include "sdio_ops.h"
+#include "sdio_cis.h"
+
+static int sdio_read_fbr(struct sdio_func *func)
+{
+ int ret;
+ unsigned char data;
+
+ ret = mmc_io_rw_direct(func->card, 0, 0,
+ SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF, 0, &data);
+ if (ret)
+ goto out;
+
+ data &= 0x0f;
+
+ if (data == 0x0f) {
+ ret = mmc_io_rw_direct(func->card, 0, 0,
+ SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF_EXT, 0, &data);
+ if (ret)
+ goto out;
+ }
+
+ func->class = data;
+
+out:
+ return ret;
+}
+
+static int sdio_init_func(struct mmc_card *card, unsigned int fn)
+{
+ int ret;
+ struct sdio_func *func;
+
+ BUG_ON(fn > SDIO_MAX_FUNCS);
+
+ func = sdio_alloc_func(card);
+ if (IS_ERR(func))
+ return PTR_ERR(func);
+
+ func->num = fn;
+
+ ret = sdio_read_fbr(func);
+ if (ret)
+ goto fail;
+
+ ret = sdio_read_func_cis(func);
+ if (ret)
+ goto fail;
+
+ card->sdio_func[fn - 1] = func;
+
+ return 0;
+
+fail:
+ /*
+ * It is okay to remove the function here even though we hold
+ * the host lock as we haven't registered the device yet.
+ */
+ sdio_remove_func(func);
+ return ret;
+}
+
+static int sdio_read_cccr(struct mmc_card *card)
+{
+ int ret;
+ int cccr_vsn;
+ unsigned char data;
+
+ memset(&card->cccr, 0, sizeof(struct sdio_cccr));
+
+ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CCCR, 0, &data);
+ if (ret)
+ goto out;
+
+ cccr_vsn = data & 0x0f;
+
+ if (cccr_vsn > SDIO_CCCR_REV_1_20) {
+ printk(KERN_ERR "%s: unrecognised CCCR structure version %d\n",
+ mmc_hostname(card->host), cccr_vsn);
+ return -EINVAL;
+ }
+
+ card->cccr.sdio_vsn = (data & 0xf0) >> 4;
+
+ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CAPS, 0, &data);
+ if (ret)
+ goto out;
+
+ if (data & SDIO_CCCR_CAP_SMB)
+ card->cccr.multi_block = 1;
+ if (data & SDIO_CCCR_CAP_LSC)
+ card->cccr.low_speed = 1;
+ if (data & SDIO_CCCR_CAP_4BLS)
+ card->cccr.wide_bus = 1;
+
+ if (cccr_vsn >= SDIO_CCCR_REV_1_10) {
+ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_POWER, 0, &data);
+ if (ret)
+ goto out;
+
+ if (data & SDIO_POWER_SMPC)
+ card->cccr.high_power = 1;
+ }
+
+ if (cccr_vsn >= SDIO_CCCR_REV_1_20) {
+ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &data);
+ if (ret)
+ goto out;
+
+ if (data & SDIO_SPEED_SHS)
+ card->cccr.high_speed = 1;
+ }
+
+out:
+ return ret;
+}
+
+static int sdio_enable_wide(struct mmc_card *card)
+{
+ int ret;
+ u8 ctrl;
+
+ if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
+ return 0;
+
+ if (card->cccr.low_speed && !card->cccr.wide_bus)
+ return 0;
+
+ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
+ if (ret)
+ return ret;
+
+ ctrl |= SDIO_BUS_WIDTH_4BIT;
+
+ ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
+ if (ret)
+ return ret;
+
+ mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
+
+ return 0;
+}
+
+/*
+ * Host is being removed. Free up the current card.
+ */
+static void mmc_sdio_remove(struct mmc_host *host)
+{
+ int i;
+
+ BUG_ON(!host);
+ BUG_ON(!host->card);
+
+ for (i = 0;i < host->card->sdio_funcs;i++) {
+ if (host->card->sdio_func[i]) {
+ sdio_remove_func(host->card->sdio_func[i]);
+ host->card->sdio_func[i] = NULL;
+ }
+ }
+
+ mmc_remove_card(host->card);
+ host->card = NULL;
+}
+
+/*
+ * Card detection callback from host.
+ */
+static void mmc_sdio_detect(struct mmc_host *host)
+{
+ int err;
+
+ BUG_ON(!host);
+ BUG_ON(!host->card);
+
+ mmc_claim_host(host);
+
+ /*
+ * Just check if our card has been removed.
+ */
+ err = mmc_select_card(host->card);
+
+ mmc_release_host(host);
+
+ if (err) {
+ mmc_sdio_remove(host);
+
+ mmc_claim_host(host);
+ mmc_detach_bus(host);
+ mmc_release_host(host);
+ }
+}
+
+
+static const struct mmc_bus_ops mmc_sdio_ops = {
+ .remove = mmc_sdio_remove,
+ .detect = mmc_sdio_detect,
+};
+
+
+/*
+ * Starting point for SDIO card init.
+ */
+int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
+{
+ int err;
+ int i, funcs;
+ struct mmc_card *card;
+
+ BUG_ON(!host);
+ WARN_ON(!host->claimed);
+
+ mmc_attach_bus(host, &mmc_sdio_ops);
+
+ /*
+ * Sanity check the voltages that the card claims to
+ * support.
+ */
+ if (ocr & 0x7F) {
+ printk(KERN_WARNING "%s: card claims to support voltages "
+ "below the defined range. These will be ignored.\n",
+ mmc_hostname(host));
+ ocr &= ~0x7F;
+ }
+
+ if (ocr & MMC_VDD_165_195) {
+ printk(KERN_WARNING "%s: SDIO card claims to support the "
+ "incompletely defined 'low voltage range'. This "
+ "will be ignored.\n", mmc_hostname(host));
+ ocr &= ~MMC_VDD_165_195;
+ }
+
+ host->ocr = mmc_select_voltage(host, ocr);
+
+ /*
+ * Can we support the voltage(s) of the card(s)?
+ */
+ if (!host->ocr) {
+ err = -EINVAL;
+ goto err;
+ }
+
+ /*
+ * Inform the card of the voltage
+ */
+ err = mmc_send_io_op_cond(host, host->ocr, &ocr);
+ if (err)
+ goto err;
+
+ /*
+ * For SPI, enable CRC as appropriate.
+ */
+ if (mmc_host_is_spi(host)) {
+ err = mmc_spi_set_crc(host, use_spi_crc);
+ if (err)
+ goto err;
+ }
+
+ /*
+ * The number of functions on the card is encoded inside
+ * the ocr.
+ */
+ funcs = (ocr & 0x70000000) >> 28;
+
+ /*
+ * Allocate card structure.
+ */
+ card = mmc_alloc_card(host);
+ if (IS_ERR(card)) {
+ err = PTR_ERR(card);
+ goto err;
+ }
+
+ card->type = MMC_TYPE_SDIO;
+ card->sdio_funcs = funcs;
+
+ host->card = card;
+
+ /*
+ * For native busses: set card RCA and quit open drain mode.
+ */
+ if (!mmc_host_is_spi(host)) {
+ err = mmc_send_relative_addr(host, &card->rca);
+ if (err)
+ goto remove;
+
+ mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+ }
+
+ /*
+ * Select card, as all following commands rely on that.
+ */
+ if (!mmc_host_is_spi(host)) {
+ err = mmc_select_card(card);
+ if (err)
+ goto remove;
+ }
+
+ /*
+ * Read the common registers.
+ */
+ err = sdio_read_cccr(card);
+ if (err)
+ goto remove;
+
+ /*
+ * Read the common CIS tuples.
+ */
+ err = sdio_read_common_cis(card);
+ if (err)
+ goto remove;
+
+ /*
+ * No support for high-speed yet, so just set
+ * the card's maximum speed.
+ */
+ mmc_set_clock(host, card->cis.max_dtr);
+
+ /*
+ * Switch to wider bus (if supported).
+ */
+ err = sdio_enable_wide(card);
+ if (err)
+ goto remove;
+
+ /*
+ * Initialize (but don't add) all present functions.
+ */
+ for (i = 0;i < funcs;i++) {
+ err = sdio_init_func(host->card, i + 1);
+ if (err)
+ goto remove;
+ }
+
+ mmc_release_host(host);
+
+ /*
+ * First add the card to the driver model...
+ */
+ err = mmc_add_card(host->card);
+ if (err)
+ goto remove_added;
+
+ /*
+ * ...then the SDIO functions.
+ */
+ for (i = 0;i < funcs;i++) {
+ err = sdio_add_func(host->card->sdio_func[i]);
+ if (err)
+ goto remove_added;
+ }
+
+ return 0;
+
+
+remove_added:
+ /* Remove without lock if the device has been added. */
+ mmc_sdio_remove(host);
+ mmc_claim_host(host);
+remove:
+ /* And with lock if it hasn't been added. */
+ if (host->card)
+ mmc_sdio_remove(host);
+err:
+ mmc_detach_bus(host);
+ mmc_release_host(host);
+
+ printk(KERN_ERR "%s: error %d whilst initialising SDIO card\n",
+ mmc_hostname(host), err);
+
+ return err;
+}
+
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
new file mode 100644
index 00000000000..0713a8c71e5
--- /dev/null
+++ b/drivers/mmc/core/sdio_bus.c
@@ -0,0 +1,270 @@
+/*
+ * linux/drivers/mmc/core/sdio_bus.c
+ *
+ * Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * SDIO function driver model
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "sdio_cis.h"
+#include "sdio_bus.h"
+
+#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev)
+#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
+
+/* show configuration fields */
+#define sdio_config_attr(field, format_string) \
+static ssize_t \
+field##_show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ struct sdio_func *func; \
+ \
+ func = dev_to_sdio_func (dev); \
+ return sprintf (buf, format_string, func->field); \
+}
+
+sdio_config_attr(class, "0x%02x\n");
+sdio_config_attr(vendor, "0x%04x\n");
+sdio_config_attr(device, "0x%04x\n");
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sdio_func *func = dev_to_sdio_func (dev);
+
+ return sprintf(buf, "sdio:c%02Xv%04Xd%04X\n",
+ func->class, func->vendor, func->device);
+}
+
+static struct device_attribute sdio_dev_attrs[] = {
+ __ATTR_RO(class),
+ __ATTR_RO(vendor),
+ __ATTR_RO(device),
+ __ATTR_RO(modalias),
+ __ATTR_NULL,
+};
+
+static const struct sdio_device_id *sdio_match_one(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ if (id->class != (__u8)SDIO_ANY_ID && id->class != func->class)
+ return NULL;
+ if (id->vendor != (__u16)SDIO_ANY_ID && id->vendor != func->vendor)
+ return NULL;
+ if (id->device != (__u16)SDIO_ANY_ID && id->device != func->device)
+ return NULL;
+ return id;
+}
+
+static const struct sdio_device_id *sdio_match_device(struct sdio_func *func,
+ struct sdio_driver *sdrv)
+{
+ const struct sdio_device_id *ids;
+
+ ids = sdrv->id_table;
+
+ if (ids) {
+ while (ids->class || ids->vendor || ids->device) {
+ if (sdio_match_one(func, ids))
+ return ids;
+ ids++;
+ }
+ }
+
+ return NULL;
+}
+
+static int sdio_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ struct sdio_driver *sdrv = to_sdio_driver(drv);
+
+ if (sdio_match_device(func, sdrv))
+ return 1;
+
+ return 0;
+}
+
+static int
+sdio_bus_uevent(struct device *dev, char **envp, int num_envp, char *buf,
+ int buf_size)
+{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ int i = 0, length = 0;
+
+ if (add_uevent_var(envp, num_envp, &i,
+ buf, buf_size, &length,
+ "SDIO_CLASS=%02X", func->class))
+ return -ENOMEM;
+
+ if (add_uevent_var(envp, num_envp, &i,
+ buf, buf_size, &length,
+ "SDIO_ID=%04X:%04X", func->vendor, func->device))
+ return -ENOMEM;
+
+ if (add_uevent_var(envp, num_envp, &i,
+ buf, buf_size, &length,
+ "MODALIAS=sdio:c%02Xv%04Xd%04X",
+ func->class, func->vendor, func->device))
+ return -ENOMEM;
+
+ envp[i] = NULL;
+
+ return 0;
+}
+
+static int sdio_bus_probe(struct device *dev)
+{
+ struct sdio_driver *drv = to_sdio_driver(dev->driver);
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ const struct sdio_device_id *id;
+ int ret;
+
+ id = sdio_match_device(func, drv);
+ if (!id)
+ return -ENODEV;
+
+ /* Set the default block size so the driver is sure it's something
+ * sensible. */
+ sdio_claim_host(func);
+ ret = sdio_set_block_size(func, 0);
+ sdio_release_host(func);
+ if (ret)
+ return ret;
+
+ return drv->probe(func, id);
+}
+
+static int sdio_bus_remove(struct device *dev)
+{
+ struct sdio_driver *drv = to_sdio_driver(dev->driver);
+ struct sdio_func *func = dev_to_sdio_func(dev);
+
+ drv->remove(func);
+
+ if (func->irq_handler) {
+ printk(KERN_WARNING "WARNING: driver %s did not remove "
+ "its interrupt handler!\n", drv->name);
+ sdio_claim_host(func);
+ sdio_release_irq(func);
+ sdio_release_host(func);
+ }
+
+ return 0;
+}
+
+static struct bus_type sdio_bus_type = {
+ .name = "sdio",
+ .dev_attrs = sdio_dev_attrs,
+ .match = sdio_bus_match,
+ .uevent = sdio_bus_uevent,
+ .probe = sdio_bus_probe,
+ .remove = sdio_bus_remove,
+};
+
+int sdio_register_bus(void)
+{
+ return bus_register(&sdio_bus_type);
+}
+
+void sdio_unregister_bus(void)
+{
+ bus_unregister(&sdio_bus_type);
+}
+
+/**
+ * sdio_register_driver - register a function driver
+ * @drv: SDIO function driver
+ */
+int sdio_register_driver(struct sdio_driver *drv)
+{
+ drv->drv.name = drv->name;
+ drv->drv.bus = &sdio_bus_type;
+ return driver_register(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(sdio_register_driver);
+
+/**
+ * sdio_unregister_driver - unregister a function driver
+ * @drv: SDIO function driver
+ */
+void sdio_unregister_driver(struct sdio_driver *drv)
+{
+ drv->drv.bus = &sdio_bus_type;
+ driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(sdio_unregister_driver);
+
+static void sdio_release_func(struct device *dev)
+{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+
+ sdio_free_func_cis(func);
+
+ if (func->info)
+ kfree(func->info);
+
+ kfree(func);
+}
+
+/*
+ * Allocate and initialise a new SDIO function structure.
+ */
+struct sdio_func *sdio_alloc_func(struct mmc_card *card)
+{
+ struct sdio_func *func;
+
+ func = kzalloc(sizeof(struct sdio_func), GFP_KERNEL);
+ if (!func)
+ return ERR_PTR(-ENOMEM);
+
+ func->card = card;
+
+ device_initialize(&func->dev);
+
+ func->dev.parent = &card->dev;
+ func->dev.bus = &sdio_bus_type;
+ func->dev.release = sdio_release_func;
+
+ return func;
+}
+
+/*
+ * Register a new SDIO function with the driver model.
+ */
+int sdio_add_func(struct sdio_func *func)
+{
+ int ret;
+
+ snprintf(func->dev.bus_id, sizeof(func->dev.bus_id),
+ "%s:%d", mmc_card_id(func->card), func->num);
+
+ ret = device_add(&func->dev);
+ if (ret == 0)
+ sdio_func_set_present(func);
+
+ return ret;
+}
+
+/*
+ * Unregister a SDIO function with the driver model, and
+ * (eventually) free it.
+ */
+void sdio_remove_func(struct sdio_func *func)
+{
+ if (sdio_func_present(func))
+ device_del(&func->dev);
+
+ put_device(&func->dev);
+}
+
diff --git a/drivers/mmc/core/sdio_bus.h b/drivers/mmc/core/sdio_bus.h
new file mode 100644
index 00000000000..567a76821ba
--- /dev/null
+++ b/drivers/mmc/core/sdio_bus.h
@@ -0,0 +1,22 @@
+/*
+ * linux/drivers/mmc/core/sdio_bus.h
+ *
+ * Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef _MMC_CORE_SDIO_BUS_H
+#define _MMC_CORE_SDIO_BUS_H
+
+struct sdio_func *sdio_alloc_func(struct mmc_card *card);
+int sdio_add_func(struct sdio_func *func);
+void sdio_remove_func(struct sdio_func *func);
+
+int sdio_register_bus(void);
+void sdio_unregister_bus(void);
+
+#endif
+
diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c
new file mode 100644
index 00000000000..d5e51b1c7b3
--- /dev/null
+++ b/drivers/mmc/core/sdio_cis.c
@@ -0,0 +1,346 @@
+/*
+ * linux/drivers/mmc/core/sdio_cis.c
+ *
+ * Author: Nicolas Pitre
+ * Created: June 11, 2007
+ * Copyright: MontaVista Software Inc.
+ *
+ * Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "sdio_cis.h"
+#include "sdio_ops.h"
+
+static int cistpl_vers_1(struct mmc_card *card, struct sdio_func *func,
+ const unsigned char *buf, unsigned size)
+{
+ unsigned i, nr_strings;
+ char **buffer, *string;
+
+ buf += 2;
+ size -= 2;
+
+ nr_strings = 0;
+ for (i = 0; i < size; i++) {
+ if (buf[i] == 0xff)
+ break;
+ if (buf[i] == 0)
+ nr_strings++;
+ }
+
+ if (buf[i-1] != '\0') {
+ printk(KERN_WARNING "SDIO: ignoring broken CISTPL_VERS_1\n");
+ return 0;
+ }
+
+ size = i;
+
+ buffer = kzalloc(sizeof(char*) * nr_strings + size, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ string = (char*)(buffer + nr_strings);
+
+ for (i = 0; i < nr_strings; i++) {
+ buffer[i] = string;
+ strcpy(string, buf);
+ string += strlen(string) + 1;
+ buf += strlen(buf) + 1;
+ }
+
+ if (func) {
+ func->num_info = nr_strings;
+ func->info = (const char**)buffer;
+ } else {
+ card->num_info = nr_strings;
+ card->info = (const char**)buffer;
+ }
+
+ return 0;
+}
+
+static int cistpl_manfid(struct mmc_card *card, struct sdio_func *func,
+ const unsigned char *buf, unsigned size)
+{
+ unsigned int vendor, device;
+
+ /* TPLMID_MANF */
+ vendor = buf[0] | (buf[1] << 8);
+
+ /* TPLMID_CARD */
+ device = buf[2] | (buf[3] << 8);
+
+ if (func) {
+ func->vendor = vendor;
+ func->device = device;
+ } else {
+ card->cis.vendor = vendor;
+ card->cis.device = device;
+ }
+
+ return 0;
+}
+
+static const unsigned char speed_val[16] =
+ { 0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80 };
+static const unsigned int speed_unit[8] =
+ { 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 };
+
+static int cistpl_funce_common(struct mmc_card *card,
+ const unsigned char *buf, unsigned size)
+{
+ if (size < 0x04 || buf[0] != 0)
+ return -EINVAL;
+
+ /* TPLFE_FN0_BLK_SIZE */
+ card->cis.blksize = buf[1] | (buf[2] << 8);
+
+ /* TPLFE_MAX_TRAN_SPEED */
+ card->cis.max_dtr = speed_val[(buf[3] >> 3) & 15] *
+ speed_unit[buf[3] & 7];
+
+ return 0;
+}
+
+static int cistpl_funce_func(struct sdio_func *func,
+ const unsigned char *buf, unsigned size)
+{
+ unsigned vsn;
+ unsigned min_size;
+
+ vsn = func->card->cccr.sdio_vsn;
+ min_size = (vsn == SDIO_SDIO_REV_1_00) ? 28 : 42;
+
+ if (size < min_size || buf[0] != 1)
+ return -EINVAL;
+
+ /* TPLFE_MAX_BLK_SIZE */
+ func->max_blksize = buf[12] | (buf[13] << 8);
+
+ return 0;
+}
+
+static int cistpl_funce(struct mmc_card *card, struct sdio_func *func,
+ const unsigned char *buf, unsigned size)
+{
+ int ret;
+
+ /*
+ * There should be two versions of the CISTPL_FUNCE tuple,
+ * one for the common CIS (function 0) and a version used by
+ * the individual function's CIS (1-7). Yet, the later has a
+ * different length depending on the SDIO spec version.
+ */
+ if (func)
+ ret = cistpl_funce_func(func, buf, size);
+ else
+ ret = cistpl_funce_common(card, buf, size);
+
+ if (ret) {
+ printk(KERN_ERR "%s: bad CISTPL_FUNCE size %u "
+ "type %u\n", mmc_hostname(card->host), size, buf[0]);
+ return ret;
+ }
+
+ return 0;
+}
+
+typedef int (tpl_parse_t)(struct mmc_card *, struct sdio_func *,
+ const unsigned char *, unsigned);
+
+struct cis_tpl {
+ unsigned char code;
+ unsigned char min_size;
+ tpl_parse_t *parse;
+};
+
+static const struct cis_tpl cis_tpl_list[] = {
+ { 0x15, 3, cistpl_vers_1 },
+ { 0x20, 4, cistpl_manfid },
+ { 0x21, 2, /* cistpl_funcid */ },
+ { 0x22, 0, cistpl_funce },
+};
+
+static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func)
+{
+ int ret;
+ struct sdio_func_tuple *this, **prev;
+ unsigned i, ptr = 0;
+
+ /*
+ * Note that this works for the common CIS (function number 0) as
+ * well as a function's CIS * since SDIO_CCCR_CIS and SDIO_FBR_CIS
+ * have the same offset.
+ */
+ for (i = 0; i < 3; i++) {
+ unsigned char x, fn;
+
+ if (func)
+ fn = func->num;
+ else
+ fn = 0;
+
+ ret = mmc_io_rw_direct(card, 0, 0,
+ SDIO_FBR_BASE(fn) + SDIO_FBR_CIS + i, 0, &x);
+ if (ret)
+ return ret;
+ ptr |= x << (i * 8);
+ }
+
+ if (func)
+ prev = &func->tuples;
+ else
+ prev = &card->tuples;
+
+ BUG_ON(*prev);
+
+ do {
+ unsigned char tpl_code, tpl_link;
+
+ ret = mmc_io_rw_direct(card, 0, 0, ptr++, 0, &tpl_code);
+ if (ret)
+ break;
+
+ /* 0xff means we're done */
+ if (tpl_code == 0xff)
+ break;
+
+ ret = mmc_io_rw_direct(card, 0, 0, ptr++, 0, &tpl_link);
+ if (ret)
+ break;
+
+ this = kmalloc(sizeof(*this) + tpl_link, GFP_KERNEL);
+ if (!this)
+ return -ENOMEM;
+
+ for (i = 0; i < tpl_link; i++) {
+ ret = mmc_io_rw_direct(card, 0, 0,
+ ptr + i, 0, &this->data[i]);
+ if (ret)
+ break;
+ }
+ if (ret) {
+ kfree(this);
+ break;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cis_tpl_list); i++)
+ if (cis_tpl_list[i].code == tpl_code)
+ break;
+ if (i >= ARRAY_SIZE(cis_tpl_list)) {
+ /* this tuple is unknown to the core */
+ this->next = NULL;
+ this->code = tpl_code;
+ this->size = tpl_link;
+ *prev = this;
+ prev = &this->next;
+ printk(KERN_DEBUG
+ "%s: queuing CIS tuple 0x%02x length %u\n",
+ mmc_hostname(card->host), tpl_code, tpl_link);
+ } else {
+ const struct cis_tpl *tpl = cis_tpl_list + i;
+ if (tpl_link < tpl->min_size) {
+ printk(KERN_ERR
+ "%s: bad CIS tuple 0x%02x (length = %u, expected >= %u)\n",
+ mmc_hostname(card->host),
+ tpl_code, tpl_link, tpl->min_size);
+ ret = -EINVAL;
+ } else if (tpl->parse) {
+ ret = tpl->parse(card, func,
+ this->data, tpl_link);
+ }
+ kfree(this);
+ }
+
+ ptr += tpl_link;
+ } while (!ret);
+
+ /*
+ * Link in all unknown tuples found in the common CIS so that
+ * drivers don't have to go digging in two places.
+ */
+ if (func)
+ *prev = card->tuples;
+
+ return ret;
+}
+
+int sdio_read_common_cis(struct mmc_card *card)
+{
+ return sdio_read_cis(card, NULL);
+}
+
+void sdio_free_common_cis(struct mmc_card *card)
+{
+ struct sdio_func_tuple *tuple, *victim;
+
+ tuple = card->tuples;
+
+ while (tuple) {
+ victim = tuple;
+ tuple = tuple->next;
+ kfree(victim);
+ }
+
+ card->tuples = NULL;
+}
+
+int sdio_read_func_cis(struct sdio_func *func)
+{
+ int ret;
+
+ ret = sdio_read_cis(func->card, func);
+ if (ret)
+ return ret;
+
+ /*
+ * Since we've linked to tuples in the card structure,
+ * we must make sure we have a reference to it.
+ */
+ get_device(&func->card->dev);
+
+ /*
+ * Vendor/device id is optional for function CIS, so
+ * copy it from the card structure as needed.
+ */
+ if (func->vendor == 0) {
+ func->vendor = func->card->cis.vendor;
+ func->device = func->card->cis.device;
+ }
+
+ return 0;
+}
+
+void sdio_free_func_cis(struct sdio_func *func)
+{
+ struct sdio_func_tuple *tuple, *victim;
+
+ tuple = func->tuples;
+
+ while (tuple && tuple != func->card->tuples) {
+ victim = tuple;
+ tuple = tuple->next;
+ kfree(victim);
+ }
+
+ func->tuples = NULL;
+
+ /*
+ * We have now removed the link to the tuples in the
+ * card structure, so remove the reference.
+ */
+ put_device(&func->card->dev);
+}
+
diff --git a/drivers/mmc/core/sdio_cis.h b/drivers/mmc/core/sdio_cis.h
new file mode 100644
index 00000000000..4d903c2e425
--- /dev/null
+++ b/drivers/mmc/core/sdio_cis.h
@@ -0,0 +1,23 @@
+/*
+ * linux/drivers/mmc/core/sdio_cis.h
+ *
+ * Author: Nicolas Pitre
+ * Created: June 11, 2007
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef _MMC_SDIO_CIS_H
+#define _MMC_SDIO_CIS_H
+
+int sdio_read_common_cis(struct mmc_card *card);
+void sdio_free_common_cis(struct mmc_card *card);
+
+int sdio_read_func_cis(struct sdio_func *func);
+void sdio_free_func_cis(struct sdio_func *func);
+
+#endif
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
new file mode 100644
index 00000000000..625b92ce9ce
--- /dev/null
+++ b/drivers/mmc/core/sdio_io.c
@@ -0,0 +1,548 @@
+/*
+ * linux/drivers/mmc/core/sdio_io.c
+ *
+ * Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "sdio_ops.h"
+
+/**
+ * sdio_claim_host - exclusively claim a bus for a certain SDIO function
+ * @func: SDIO function that will be accessed
+ *
+ * Claim a bus for a set of operations. The SDIO function given
+ * is used to figure out which bus is relevant.
+ */
+void sdio_claim_host(struct sdio_func *func)
+{
+ BUG_ON(!func);
+ BUG_ON(!func->card);
+
+ mmc_claim_host(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_claim_host);
+
+/**
+ * sdio_release_host - release a bus for a certain SDIO function
+ * @func: SDIO function that was accessed
+ *
+ * Release a bus, allowing others to claim the bus for their
+ * operations.
+ */
+void sdio_release_host(struct sdio_func *func)
+{
+ BUG_ON(!func);
+ BUG_ON(!func->card);
+
+ mmc_release_host(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_release_host);
+
+/**
+ * sdio_enable_func - enables a SDIO function for usage
+ * @func: SDIO function to enable
+ *
+ * Powers up and activates a SDIO function so that register
+ * access is possible.
+ */
+int sdio_enable_func(struct sdio_func *func)
+{
+ int ret;
+ unsigned char reg;
+ unsigned long timeout;
+
+ BUG_ON(!func);
+ BUG_ON(!func->card);
+
+ pr_debug("SDIO: Enabling device %s...\n", sdio_func_id(func));
+
+ ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, &reg);
+ if (ret)
+ goto err;
+
+ reg |= 1 << func->num;
+
+ ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IOEx, reg, NULL);
+ if (ret)
+ goto err;
+
+ /*
+ * FIXME: This should timeout based on information in the CIS,
+ * but we don't have card to parse that yet.
+ */
+ timeout = jiffies + HZ;
+
+ while (1) {
+ ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IORx, 0, &reg);
+ if (ret)
+ goto err;
+ if (reg & (1 << func->num))
+ break;
+ ret = -ETIME;
+ if (time_after(jiffies, timeout))
+ goto err;
+ }
+
+ pr_debug("SDIO: Enabled device %s\n", sdio_func_id(func));
+
+ return 0;
+
+err:
+ pr_debug("SDIO: Failed to enable device %s\n", sdio_func_id(func));
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sdio_enable_func);
+
+/**
+ * sdio_disable_func - disable a SDIO function
+ * @func: SDIO function to disable
+ *
+ * Powers down and deactivates a SDIO function. Register access
+ * to this function will fail until the function is reenabled.
+ */
+int sdio_disable_func(struct sdio_func *func)
+{
+ int ret;
+ unsigned char reg;
+
+ BUG_ON(!func);
+ BUG_ON(!func->card);
+
+ pr_debug("SDIO: Disabling device %s...\n", sdio_func_id(func));
+
+ ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, &reg);
+ if (ret)
+ goto err;
+
+ reg &= ~(1 << func->num);
+
+ ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IOEx, reg, NULL);
+ if (ret)
+ goto err;
+
+ pr_debug("SDIO: Disabled device %s\n", sdio_func_id(func));
+
+ return 0;
+
+err:
+ pr_debug("SDIO: Failed to disable device %s\n", sdio_func_id(func));
+ return -EIO;
+}
+EXPORT_SYMBOL_GPL(sdio_disable_func);
+
+/**
+ * sdio_set_block_size - set the block size of an SDIO function
+ * @func: SDIO function to change
+ * @blksz: new block size or 0 to use the default.
+ *
+ * The default block size is the largest supported by both the function
+ * and the host, with a maximum of 512 to ensure that arbitrarily sized
+ * data transfer use the optimal (least) number of commands.
+ *
+ * A driver may call this to override the default block size set by the
+ * core. This can be used to set a block size greater than the maximum
+ * that reported by the card; it is the driver's responsibility to ensure
+ * it uses a value that the card supports.
+ *
+ * Returns 0 on success, -EINVAL if the host does not support the
+ * requested block size, or -EIO (etc.) if one of the resultant FBR block
+ * size register writes failed.
+ *
+ */
+int sdio_set_block_size(struct sdio_func *func, unsigned blksz)
+{
+ int ret;
+
+ if (blksz > func->card->host->max_blk_size)
+ return -EINVAL;
+
+ if (blksz == 0) {
+ blksz = min(min(
+ func->max_blksize,
+ func->card->host->max_blk_size),
+ 512u);
+ }
+
+ ret = mmc_io_rw_direct(func->card, 1, 0,
+ SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE,
+ blksz & 0xff, NULL);
+ if (ret)
+ return ret;
+ ret = mmc_io_rw_direct(func->card, 1, 0,
+ SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE + 1,
+ (blksz >> 8) & 0xff, NULL);
+ if (ret)
+ return ret;
+ func->cur_blksize = blksz;
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(sdio_set_block_size);
+
+/* Split an arbitrarily sized data transfer into several
+ * IO_RW_EXTENDED commands. */
+static int sdio_io_rw_ext_helper(struct sdio_func *func, int write,
+ unsigned addr, int incr_addr, u8 *buf, unsigned size)
+{
+ unsigned remainder = size;
+ unsigned max_blocks;
+ int ret;
+
+ /* Do the bulk of the transfer using block mode (if supported). */
+ if (func->card->cccr.multi_block) {
+ /* Blocks per command is limited by host count, host transfer
+ * size (we only use a single sg entry) and the maximum for
+ * IO_RW_EXTENDED of 511 blocks. */
+ max_blocks = min(min(
+ func->card->host->max_blk_count,
+ func->card->host->max_seg_size / func->cur_blksize),
+ 511u);
+
+ while (remainder > func->cur_blksize) {
+ unsigned blocks;
+
+ blocks = remainder / func->cur_blksize;
+ if (blocks > max_blocks)
+ blocks = max_blocks;
+ size = blocks * func->cur_blksize;
+
+ ret = mmc_io_rw_extended(func->card, write,
+ func->num, addr, incr_addr, buf,
+ blocks, func->cur_blksize);
+ if (ret)
+ return ret;
+
+ remainder -= size;
+ buf += size;
+ if (incr_addr)
+ addr += size;
+ }
+ }
+
+ /* Write the remainder using byte mode. */
+ while (remainder > 0) {
+ size = remainder;
+ if (size > func->cur_blksize)
+ size = func->cur_blksize;
+ if (size > 512)
+ size = 512; /* maximum size for byte mode */
+
+ ret = mmc_io_rw_extended(func->card, write, func->num, addr,
+ incr_addr, buf, 1, size);
+ if (ret)
+ return ret;
+
+ remainder -= size;
+ buf += size;
+ if (incr_addr)
+ addr += size;
+ }
+ return 0;
+}
+
+/**
+ * sdio_readb - read a single byte from a SDIO function
+ * @func: SDIO function to access
+ * @addr: address to read
+ * @err_ret: optional status value from transfer
+ *
+ * Reads a single byte from the address space of a given SDIO
+ * function. If there is a problem reading the address, 0xff
+ * is returned and @err_ret will contain the error code.
+ */
+unsigned char sdio_readb(struct sdio_func *func, unsigned int addr,
+ int *err_ret)
+{
+ int ret;
+ unsigned char val;
+
+ BUG_ON(!func);
+
+ if (err_ret)
+ *err_ret = 0;
+
+ ret = mmc_io_rw_direct(func->card, 0, func->num, addr, 0, &val);
+ if (ret) {
+ if (err_ret)
+ *err_ret = ret;
+ return 0xFF;
+ }
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(sdio_readb);
+
+/**
+ * sdio_writeb - write a single byte to a SDIO function
+ * @func: SDIO function to access
+ * @b: byte to write
+ * @addr: address to write to
+ * @err_ret: optional status value from transfer
+ *
+ * Writes a single byte to the address space of a given SDIO
+ * function. @err_ret will contain the status of the actual
+ * transfer.
+ */
+void sdio_writeb(struct sdio_func *func, unsigned char b, unsigned int addr,
+ int *err_ret)
+{
+ int ret;
+
+ BUG_ON(!func);
+
+ ret = mmc_io_rw_direct(func->card, 1, func->num, addr, b, NULL);
+ if (err_ret)
+ *err_ret = ret;
+}
+EXPORT_SYMBOL_GPL(sdio_writeb);
+
+/**
+ * sdio_memcpy_fromio - read a chunk of memory from a SDIO function
+ * @func: SDIO function to access
+ * @dst: buffer to store the data
+ * @addr: address to begin reading from
+ * @count: number of bytes to read
+ *
+ * Reads from the address space of a given SDIO function. Return
+ * value indicates if the transfer succeeded or not.
+ */
+int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
+ unsigned int addr, int count)
+{
+ return sdio_io_rw_ext_helper(func, 0, addr, 1, dst, count);
+}
+EXPORT_SYMBOL_GPL(sdio_memcpy_fromio);
+
+/**
+ * sdio_memcpy_toio - write a chunk of memory to a SDIO function
+ * @func: SDIO function to access
+ * @addr: address to start writing to
+ * @src: buffer that contains the data to write
+ * @count: number of bytes to write
+ *
+ * Writes to the address space of a given SDIO function. Return
+ * value indicates if the transfer succeeded or not.
+ */
+int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
+ void *src, int count)
+{
+ return sdio_io_rw_ext_helper(func, 1, addr, 1, src, count);
+}
+EXPORT_SYMBOL_GPL(sdio_memcpy_toio);
+
+/**
+ * sdio_readsb - read from a FIFO on a SDIO function
+ * @func: SDIO function to access
+ * @dst: buffer to store the data
+ * @addr: address of (single byte) FIFO
+ * @count: number of bytes to read
+ *
+ * Reads from the specified FIFO of a given SDIO function. Return
+ * value indicates if the transfer succeeded or not.
+ */
+int sdio_readsb(struct sdio_func *func, void *dst, unsigned int addr,
+ int count)
+{
+ return sdio_io_rw_ext_helper(func, 0, addr, 0, dst, count);
+}
+
+EXPORT_SYMBOL_GPL(sdio_readsb);
+
+/**
+ * sdio_writesb - write to a FIFO of a SDIO function
+ * @func: SDIO function to access
+ * @addr: address of (single byte) FIFO
+ * @src: buffer that contains the data to write
+ * @count: number of bytes to write
+ *
+ * Writes to the specified FIFO of a given SDIO function. Return
+ * value indicates if the transfer succeeded or not.
+ */
+int sdio_writesb(struct sdio_func *func, unsigned int addr, void *src,
+ int count)
+{
+ return sdio_io_rw_ext_helper(func, 1, addr, 0, src, count);
+}
+EXPORT_SYMBOL_GPL(sdio_writesb);
+
+/**
+ * sdio_readw - read a 16 bit integer from a SDIO function
+ * @func: SDIO function to access
+ * @addr: address to read
+ * @err_ret: optional status value from transfer
+ *
+ * Reads a 16 bit integer from the address space of a given SDIO
+ * function. If there is a problem reading the address, 0xffff
+ * is returned and @err_ret will contain the error code.
+ */
+unsigned short sdio_readw(struct sdio_func *func, unsigned int addr,
+ int *err_ret)
+{
+ int ret;
+
+ if (err_ret)
+ *err_ret = 0;
+
+ ret = sdio_memcpy_fromio(func, func->tmpbuf, addr, 2);
+ if (ret) {
+ if (err_ret)
+ *err_ret = ret;
+ return 0xFFFF;
+ }
+
+ return le16_to_cpu(*(u16*)func->tmpbuf);
+}
+EXPORT_SYMBOL_GPL(sdio_readw);
+
+/**
+ * sdio_writew - write a 16 bit integer to a SDIO function
+ * @func: SDIO function to access
+ * @b: integer to write
+ * @addr: address to write to
+ * @err_ret: optional status value from transfer
+ *
+ * Writes a 16 bit integer to the address space of a given SDIO
+ * function. @err_ret will contain the status of the actual
+ * transfer.
+ */
+void sdio_writew(struct sdio_func *func, unsigned short b, unsigned int addr,
+ int *err_ret)
+{
+ int ret;
+
+ *(u16*)func->tmpbuf = cpu_to_le16(b);
+
+ ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 2);
+ if (err_ret)
+ *err_ret = ret;
+}
+EXPORT_SYMBOL_GPL(sdio_writew);
+
+/**
+ * sdio_readl - read a 32 bit integer from a SDIO function
+ * @func: SDIO function to access
+ * @addr: address to read
+ * @err_ret: optional status value from transfer
+ *
+ * Reads a 32 bit integer from the address space of a given SDIO
+ * function. If there is a problem reading the address,
+ * 0xffffffff is returned and @err_ret will contain the error
+ * code.
+ */
+unsigned long sdio_readl(struct sdio_func *func, unsigned int addr,
+ int *err_ret)
+{
+ int ret;
+
+ if (err_ret)
+ *err_ret = 0;
+
+ ret = sdio_memcpy_fromio(func, func->tmpbuf, addr, 4);
+ if (ret) {
+ if (err_ret)
+ *err_ret = ret;
+ return 0xFFFFFFFF;
+ }
+
+ return le32_to_cpu(*(u32*)func->tmpbuf);
+}
+EXPORT_SYMBOL_GPL(sdio_readl);
+
+/**
+ * sdio_writel - write a 32 bit integer to a SDIO function
+ * @func: SDIO function to access
+ * @b: integer to write
+ * @addr: address to write to
+ * @err_ret: optional status value from transfer
+ *
+ * Writes a 32 bit integer to the address space of a given SDIO
+ * function. @err_ret will contain the status of the actual
+ * transfer.
+ */
+void sdio_writel(struct sdio_func *func, unsigned long b, unsigned int addr,
+ int *err_ret)
+{
+ int ret;
+
+ *(u32*)func->tmpbuf = cpu_to_le32(b);
+
+ ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 4);
+ if (err_ret)
+ *err_ret = ret;
+}
+EXPORT_SYMBOL_GPL(sdio_writel);
+
+/**
+ * sdio_f0_readb - read a single byte from SDIO function 0
+ * @func: an SDIO function of the card
+ * @addr: address to read
+ * @err_ret: optional status value from transfer
+ *
+ * Reads a single byte from the address space of SDIO function 0.
+ * If there is a problem reading the address, 0xff is returned
+ * and @err_ret will contain the error code.
+ */
+unsigned char sdio_f0_readb(struct sdio_func *func, unsigned int addr,
+ int *err_ret)
+{
+ int ret;
+ unsigned char val;
+
+ BUG_ON(!func);
+
+ if (err_ret)
+ *err_ret = 0;
+
+ ret = mmc_io_rw_direct(func->card, 0, 0, addr, 0, &val);
+ if (ret) {
+ if (err_ret)
+ *err_ret = ret;
+ return 0xFF;
+ }
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(sdio_f0_readb);
+
+/**
+ * sdio_f0_writeb - write a single byte to SDIO function 0
+ * @func: an SDIO function of the card
+ * @b: byte to write
+ * @addr: address to write to
+ * @err_ret: optional status value from transfer
+ *
+ * Writes a single byte to the address space of SDIO function 0.
+ * @err_ret will contain the status of the actual transfer.
+ *
+ * Only writes to the vendor specific CCCR registers (0xF0 -
+ * 0xFF) are permiited; @err_ret will be set to -EINVAL for *
+ * writes outside this range.
+ */
+void sdio_f0_writeb(struct sdio_func *func, unsigned char b, unsigned int addr,
+ int *err_ret)
+{
+ int ret;
+
+ BUG_ON(!func);
+
+ if (addr < 0xF0 || addr > 0xFF) {
+ if (err_ret)
+ *err_ret = -EINVAL;
+ return;
+ }
+
+ ret = mmc_io_rw_direct(func->card, 1, 0, addr, b, NULL);
+ if (err_ret)
+ *err_ret = ret;
+}
+EXPORT_SYMBOL_GPL(sdio_f0_writeb);
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
new file mode 100644
index 00000000000..3bd3021f5e8
--- /dev/null
+++ b/drivers/mmc/core/sdio_irq.c
@@ -0,0 +1,267 @@
+/*
+ * linux/drivers/mmc/core/sdio_irq.c
+ *
+ * Author: Nicolas Pitre
+ * Created: June 18, 2007
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/kthread.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+
+#include <linux/mmc/core.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "sdio_ops.h"
+
+static int process_sdio_pending_irqs(struct mmc_card *card)
+{
+ int i, ret, count;
+ unsigned char pending;
+
+ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending);
+ if (ret) {
+ printk(KERN_DEBUG "%s: error %d reading SDIO_CCCR_INTx\n",
+ mmc_card_id(card), ret);
+ return ret;
+ }
+
+ count = 0;
+ for (i = 1; i <= 7; i++) {
+ if (pending & (1 << i)) {
+ struct sdio_func *func = card->sdio_func[i - 1];
+ if (!func) {
+ printk(KERN_WARNING "%s: pending IRQ for "
+ "non-existant function\n",
+ mmc_card_id(card));
+ ret = -EINVAL;
+ } else if (func->irq_handler) {
+ func->irq_handler(func);
+ count++;
+ } else {
+ printk(KERN_WARNING "%s: pending IRQ with no handler\n",
+ sdio_func_id(func));
+ ret = -EINVAL;
+ }
+ }
+ }
+
+ if (count)
+ return count;
+
+ return ret;
+}
+
+static int sdio_irq_thread(void *_host)
+{
+ struct mmc_host *host = _host;
+ struct sched_param param = { .sched_priority = 1 };
+ unsigned long period, idle_period;
+ int ret;
+
+ sched_setscheduler(current, SCHED_FIFO, &param);
+
+ /*
+ * We want to allow for SDIO cards to work even on non SDIO
+ * aware hosts. One thing that non SDIO host cannot do is
+ * asynchronous notification of pending SDIO card interrupts
+ * hence we poll for them in that case.
+ */
+ idle_period = msecs_to_jiffies(10);
+ period = (host->caps & MMC_CAP_SDIO_IRQ) ?
+ MAX_SCHEDULE_TIMEOUT : idle_period;
+
+ pr_debug("%s: IRQ thread started (poll period = %lu jiffies)\n",
+ mmc_hostname(host), period);
+
+ do {
+ /*
+ * We claim the host here on drivers behalf for a couple
+ * reasons:
+ *
+ * 1) it is already needed to retrieve the CCCR_INTx;
+ * 2) we want the driver(s) to clear the IRQ condition ASAP;
+ * 3) we need to control the abort condition locally.
+ *
+ * Just like traditional hard IRQ handlers, we expect SDIO
+ * IRQ handlers to be quick and to the point, so that the
+ * holding of the host lock does not cover too much work
+ * that doesn't require that lock to be held.
+ */
+ ret = __mmc_claim_host(host, &host->sdio_irq_thread_abort);
+ if (ret)
+ break;
+ ret = process_sdio_pending_irqs(host->card);
+ mmc_release_host(host);
+
+ /*
+ * Give other threads a chance to run in the presence of
+ * errors. FIXME: determine if due to card removal and
+ * possibly exit this thread if so.
+ */
+ if (ret < 0)
+ ssleep(1);
+
+ /*
+ * Adaptive polling frequency based on the assumption
+ * that an interrupt will be closely followed by more.
+ * This has a substantial benefit for network devices.
+ */
+ if (!(host->caps & MMC_CAP_SDIO_IRQ)) {
+ if (ret > 0)
+ period /= 2;
+ else {
+ period++;
+ if (period > idle_period)
+ period = idle_period;
+ }
+ }
+
+ set_task_state(current, TASK_INTERRUPTIBLE);
+ if (host->caps & MMC_CAP_SDIO_IRQ)
+ host->ops->enable_sdio_irq(host, 1);
+ if (!kthread_should_stop())
+ schedule_timeout(period);
+ set_task_state(current, TASK_RUNNING);
+ } while (!kthread_should_stop());
+
+ if (host->caps & MMC_CAP_SDIO_IRQ)
+ host->ops->enable_sdio_irq(host, 0);
+
+ pr_debug("%s: IRQ thread exiting with code %d\n",
+ mmc_hostname(host), ret);
+
+ return ret;
+}
+
+static int sdio_card_irq_get(struct mmc_card *card)
+{
+ struct mmc_host *host = card->host;
+
+ WARN_ON(!host->claimed);
+
+ if (!host->sdio_irqs++) {
+ atomic_set(&host->sdio_irq_thread_abort, 0);
+ host->sdio_irq_thread =
+ kthread_run(sdio_irq_thread, host, "ksdiorqd");
+ if (IS_ERR(host->sdio_irq_thread)) {
+ int err = PTR_ERR(host->sdio_irq_thread);
+ host->sdio_irqs--;
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static int sdio_card_irq_put(struct mmc_card *card)
+{
+ struct mmc_host *host = card->host;
+
+ WARN_ON(!host->claimed);
+ BUG_ON(host->sdio_irqs < 1);
+
+ if (!--host->sdio_irqs) {
+ atomic_set(&host->sdio_irq_thread_abort, 1);
+ kthread_stop(host->sdio_irq_thread);
+ }
+
+ return 0;
+}
+
+/**
+ * sdio_claim_irq - claim the IRQ for a SDIO function
+ * @func: SDIO function
+ * @handler: IRQ handler callback
+ *
+ * Claim and activate the IRQ for the given SDIO function. The provided
+ * handler will be called when that IRQ is asserted. The host is always
+ * claimed already when the handler is called so the handler must not
+ * call sdio_claim_host() nor sdio_release_host().
+ */
+int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler)
+{
+ int ret;
+ unsigned char reg;
+
+ BUG_ON(!func);
+ BUG_ON(!func->card);
+
+ pr_debug("SDIO: Enabling IRQ for %s...\n", sdio_func_id(func));
+
+ if (func->irq_handler) {
+ pr_debug("SDIO: IRQ for %s already in use.\n", sdio_func_id(func));
+ return -EBUSY;
+ }
+
+ ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, &reg);
+ if (ret)
+ return ret;
+
+ reg |= 1 << func->num;
+
+ reg |= 1; /* Master interrupt enable */
+
+ ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL);
+ if (ret)
+ return ret;
+
+ func->irq_handler = handler;
+ ret = sdio_card_irq_get(func->card);
+ if (ret)
+ func->irq_handler = NULL;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sdio_claim_irq);
+
+/**
+ * sdio_release_irq - release the IRQ for a SDIO function
+ * @func: SDIO function
+ *
+ * Disable and release the IRQ for the given SDIO function.
+ */
+int sdio_release_irq(struct sdio_func *func)
+{
+ int ret;
+ unsigned char reg;
+
+ BUG_ON(!func);
+ BUG_ON(!func->card);
+
+ pr_debug("SDIO: Disabling IRQ for %s...\n", sdio_func_id(func));
+
+ if (func->irq_handler) {
+ func->irq_handler = NULL;
+ sdio_card_irq_put(func->card);
+ }
+
+ ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, &reg);
+ if (ret)
+ return ret;
+
+ reg &= ~(1 << func->num);
+
+ /* Disable master interrupt with the last function interrupt */
+ if (!(reg & 0xFE))
+ reg = 0;
+
+ ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sdio_release_irq);
+
diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c
new file mode 100644
index 00000000000..4d289b27503
--- /dev/null
+++ b/drivers/mmc/core/sdio_ops.c
@@ -0,0 +1,176 @@
+/*
+ * linux/drivers/mmc/sdio_ops.c
+ *
+ * Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+
+#include "core.h"
+
+int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
+{
+ struct mmc_command cmd;
+ int i, err = 0;
+
+ BUG_ON(!host);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = SD_IO_SEND_OP_COND;
+ cmd.arg = ocr;
+ cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR;
+
+ for (i = 100; i; i--) {
+ err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+ if (err)
+ break;
+
+ /* if we're just probing, do a single pass */
+ if (ocr == 0)
+ break;
+
+ /* otherwise wait until reset completes */
+ if (mmc_host_is_spi(host)) {
+ /*
+ * Both R1_SPI_IDLE and MMC_CARD_BUSY indicate
+ * an initialized card under SPI, but some cards
+ * (Marvell's) only behave when looking at this
+ * one.
+ */
+ if (cmd.resp[1] & MMC_CARD_BUSY)
+ break;
+ } else {
+ if (cmd.resp[0] & MMC_CARD_BUSY)
+ break;
+ }
+
+ err = -ETIMEDOUT;
+
+ mmc_delay(10);
+ }
+
+ if (rocr)
+ *rocr = cmd.resp[mmc_host_is_spi(host) ? 1 : 0];
+
+ return err;
+}
+
+int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
+ unsigned addr, u8 in, u8* out)
+{
+ struct mmc_command cmd;
+ int err;
+
+ BUG_ON(!card);
+ BUG_ON(fn > 7);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = SD_IO_RW_DIRECT;
+ cmd.arg = write ? 0x80000000 : 0x00000000;
+ cmd.arg |= fn << 28;
+ cmd.arg |= (write && out) ? 0x08000000 : 0x00000000;
+ cmd.arg |= addr << 9;
+ cmd.arg |= in;
+ cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err)
+ return err;
+
+ if (mmc_host_is_spi(card->host)) {
+ /* host driver already reported errors */
+ } else {
+ if (cmd.resp[0] & R5_ERROR)
+ return -EIO;
+ if (cmd.resp[0] & R5_FUNCTION_NUMBER)
+ return -EINVAL;
+ if (cmd.resp[0] & R5_OUT_OF_RANGE)
+ return -ERANGE;
+ }
+
+ if (out) {
+ if (mmc_host_is_spi(card->host))
+ *out = (cmd.resp[0] >> 8) & 0xFF;
+ else
+ *out = cmd.resp[0] & 0xFF;
+ }
+
+ return 0;
+}
+
+int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
+ unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
+{
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_data data;
+ struct scatterlist sg;
+
+ BUG_ON(!card);
+ BUG_ON(fn > 7);
+ BUG_ON(blocks == 1 && blksz > 512);
+ WARN_ON(blocks == 0);
+ WARN_ON(blksz == 0);
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ memset(&data, 0, sizeof(struct mmc_data));
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ cmd.opcode = SD_IO_RW_EXTENDED;
+ cmd.arg = write ? 0x80000000 : 0x00000000;
+ cmd.arg |= fn << 28;
+ cmd.arg |= incr_addr ? 0x04000000 : 0x00000000;
+ cmd.arg |= addr << 9;
+ if (blocks == 1 && blksz <= 512)
+ cmd.arg |= (blksz == 512) ? 0 : blksz; /* byte mode */
+ else
+ cmd.arg |= 0x08000000 | blocks; /* block mode */
+ cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
+
+ data.blksz = blksz;
+ data.blocks = blocks;
+ data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
+ data.sg = &sg;
+ data.sg_len = 1;
+
+ sg_init_one(&sg, buf, blksz * blocks);
+
+ mmc_set_data_timeout(&data, card);
+
+ mmc_wait_for_req(card->host, &mrq);
+
+ if (cmd.error)
+ return cmd.error;
+ if (data.error)
+ return data.error;
+
+ if (mmc_host_is_spi(card->host)) {
+ /* host driver already reported errors */
+ } else {
+ if (cmd.resp[0] & R5_ERROR)
+ return -EIO;
+ if (cmd.resp[0] & R5_FUNCTION_NUMBER)
+ return -EINVAL;
+ if (cmd.resp[0] & R5_OUT_OF_RANGE)
+ return -ERANGE;
+ }
+
+ return 0;
+}
+
diff --git a/drivers/mmc/core/sdio_ops.h b/drivers/mmc/core/sdio_ops.h
new file mode 100644
index 00000000000..e2e74b0d17d
--- /dev/null
+++ b/drivers/mmc/core/sdio_ops.h
@@ -0,0 +1,22 @@
+/*
+ * linux/drivers/mmc/sdio_ops.c
+ *
+ * Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef _MMC_SDIO_OPS_H
+#define _MMC_SDIO_OPS_H
+
+int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
+int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
+ unsigned addr, u8 in, u8* out);
+int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
+ unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz);
+
+#endif
+
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index e23082fe88d..5fef6783c71 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -35,6 +35,23 @@ config MMC_SDHCI
If unsure, say N.
+config MMC_RICOH_MMC
+ tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL && MMC_SDHCI
+ help
+ This selects the disabler for the Ricoh MMC Controller. This
+ proprietary controller is unnecessary because the SDHCI driver
+ supports MMC cards on the SD controller, but if it is not
+ disabled, it will steal the MMC cards away - rendering them
+ useless. It is safe to select this driver even if you don't
+ have a Ricoh based card reader.
+
+
+ To compile this driver as a module, choose M here:
+ the module will be called ricoh_mmc.
+
+ If unsure, say Y.
+
config MMC_OMAP
tristate "TI OMAP Multimedia Card Interface support"
depends on ARCH_OMAP
@@ -100,3 +117,16 @@ config MMC_TIFM_SD
To compile this driver as a module, choose M here: the
module will be called tifm_sd.
+config MMC_SPI
+ tristate "MMC/SD over SPI (EXPERIMENTAL)"
+ depends on MMC && SPI_MASTER && !HIGHMEM && EXPERIMENTAL
+ select CRC7
+ select CRC_ITU_T
+ help
+ Some systems accss MMC/SD cards using a SPI controller instead of
+ using a "native" MMC/SD controller. This has a disadvantage of
+ being relatively high overhead, but a compensating advantage of
+ working on many systems without dedicated MMC/SD controllers.
+
+ If unsure, or if your system has no SPI master driver, say N.
+
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 6685f64345b..3877c87e6da 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -10,9 +10,11 @@ obj-$(CONFIG_MMC_ARMMMCI) += mmci.o
obj-$(CONFIG_MMC_PXA) += pxamci.o
obj-$(CONFIG_MMC_IMX) += imxmmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
+obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
+obj-$(CONFIG_MMC_SPI) += mmc_spi.o
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 955ea60583b..6ba98a49612 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -328,7 +328,7 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host)
data = cmd->data;
if (!data) return;
- if (cmd->data->flags & MMC_DATA_MULTI) {
+ if (cmd->data->blocks > 1) {
pr_debug("multiple write : wait for BLKE...\n");
at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE);
} else
@@ -428,6 +428,14 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
}
if (data) {
+
+ if ( data->blksz & 0x3 ) {
+ pr_debug("Unsupported block size\n");
+ cmd->error = -EINVAL;
+ mmc_request_done(host->mmc, host->request);
+ return;
+ }
+
block_length = data->blksz;
blocks = data->blocks;
@@ -439,7 +447,7 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
if (data->flags & MMC_DATA_STREAM)
cmdr |= AT91_MCI_TRTYP_STREAM;
- if (data->flags & MMC_DATA_MULTI)
+ if (data->blocks > 1)
cmdr |= AT91_MCI_TRTYP_MULTIPLE;
}
else {
@@ -577,24 +585,22 @@ static void at91_mci_completed_command(struct at91mci_host *host)
AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) {
- cmd->error = MMC_ERR_NONE;
+ cmd->error = 0;
}
else {
if (status & (AT91_MCI_RTOE | AT91_MCI_DTOE))
- cmd->error = MMC_ERR_TIMEOUT;
+ cmd->error = -ETIMEDOUT;
else if (status & (AT91_MCI_RCRCE | AT91_MCI_DCRCE))
- cmd->error = MMC_ERR_BADCRC;
- else if (status & (AT91_MCI_OVRE | AT91_MCI_UNRE))
- cmd->error = MMC_ERR_FIFO;
+ cmd->error = -EILSEQ;
else
- cmd->error = MMC_ERR_FAILED;
+ cmd->error = -EIO;
pr_debug("Error detected and set to %d (cmd = %d, retries = %d)\n",
cmd->error, cmd->opcode, cmd->retries);
}
}
else
- cmd->error = MMC_ERR_NONE;
+ cmd->error = 0;
at91_mci_process_next(host);
}
@@ -836,7 +842,6 @@ static int __init at91_mci_probe(struct platform_device *pdev)
mmc->f_min = 375000;
mmc->f_max = 25000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps = MMC_CAP_BYTEBLOCK;
mmc->max_blk_size = 4095;
mmc->max_blk_count = mmc->max_req_size;
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 34c99d4ea04..92c4d0dfee4 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -186,7 +186,7 @@ static void au1xmmc_tasklet_finish(unsigned long param)
}
static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
- struct mmc_command *cmd, unsigned int flags)
+ struct mmc_command *cmd, struct mmc_data *data)
{
u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
@@ -208,19 +208,21 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
default:
printk(KERN_INFO "au1xmmc: unhandled response type %02x\n",
mmc_resp_type(cmd));
- return MMC_ERR_INVALID;
+ return -EINVAL;
}
- if (flags & MMC_DATA_READ) {
- if (flags & MMC_DATA_MULTI)
- mmccmd |= SD_CMD_CT_4;
- else
- mmccmd |= SD_CMD_CT_2;
- } else if (flags & MMC_DATA_WRITE) {
- if (flags & MMC_DATA_MULTI)
- mmccmd |= SD_CMD_CT_3;
- else
- mmccmd |= SD_CMD_CT_1;
+ if (data) {
+ if (flags & MMC_DATA_READ) {
+ if (data->blocks > 1)
+ mmccmd |= SD_CMD_CT_4;
+ else
+ mmccmd |= SD_CMD_CT_2;
+ } else if (flags & MMC_DATA_WRITE) {
+ if (data->blocks > 1)
+ mmccmd |= SD_CMD_CT_3;
+ else
+ mmccmd |= SD_CMD_CT_1;
+ }
}
au_writel(cmd->arg, HOST_CMDARG(host));
@@ -253,7 +255,7 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
IRQ_ON(host, SD_CONFIG_CR);
}
- return MMC_ERR_NONE;
+ return 0;
}
static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
@@ -278,7 +280,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
while((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
status = au_readl(HOST_STATUS(host));
- data->error = MMC_ERR_NONE;
+ data->error = 0;
dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir);
/* Process any errors */
@@ -288,14 +290,14 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
crc |= ((status & 0x07) == 0x02) ? 0 : 1;
if (crc)
- data->error = MMC_ERR_BADCRC;
+ data->error = -EILSEQ;
/* Clear the CRC bits */
au_writel(SD_STATUS_WC | SD_STATUS_RC, HOST_STATUS(host));
data->bytes_xfered = 0;
- if (data->error == MMC_ERR_NONE) {
+ if (!data->error) {
if (host->flags & HOST_F_DMA) {
u32 chan = DMA_CHANNEL(host);
@@ -475,7 +477,7 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
return;
cmd = mrq->cmd;
- cmd->error = MMC_ERR_NONE;
+ cmd->error = 0;
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136) {
@@ -512,11 +514,11 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
/* Figure out errors */
if (status & (SD_STATUS_SC | SD_STATUS_WC | SD_STATUS_RC))
- cmd->error = MMC_ERR_BADCRC;
+ cmd->error = -EILSEQ;
trans = host->flags & (HOST_F_XMIT | HOST_F_RECV);
- if (!trans || cmd->error != MMC_ERR_NONE) {
+ if (!trans || cmd->error) {
IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA|SD_CONFIG_RF);
tasklet_schedule(&host->finish_task);
@@ -589,7 +591,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
data->sg_len, host->dma.dir);
if (host->dma.len == 0)
- return MMC_ERR_TIMEOUT;
+ return -ETIMEDOUT;
au_writel(data->blksz - 1, HOST_BLKSIZE(host));
@@ -640,11 +642,11 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
//IRQ_ON(host, SD_CONFIG_RA|SD_CONFIG_RF);
}
- return MMC_ERR_NONE;
+ return 0;
dataerr:
dma_unmap_sg(mmc_dev(host->mmc),data->sg,data->sg_len,host->dma.dir);
- return MMC_ERR_TIMEOUT;
+ return -ETIMEDOUT;
}
/* static void au1xmmc_request
@@ -656,7 +658,7 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
struct au1xmmc_host *host = mmc_priv(mmc);
unsigned int flags = 0;
- int ret = MMC_ERR_NONE;
+ int ret = 0;
WARN_ON(irqs_disabled());
WARN_ON(host->status != HOST_S_IDLE);
@@ -672,10 +674,10 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
ret = au1xmmc_prepare_data(host, mrq->data);
}
- if (ret == MMC_ERR_NONE)
- ret = au1xmmc_send_command(host, 0, mrq->cmd, flags);
+ if (!ret)
+ ret = au1xmmc_send_command(host, 0, mrq->cmd, mrq->data);
- if (ret != MMC_ERR_NONE) {
+ if (ret) {
mrq->cmd->error = ret;
au1xmmc_finish_request(host);
}
@@ -764,10 +766,10 @@ static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
if (host->mrq && (status & STATUS_TIMEOUT)) {
if (status & SD_STATUS_RAT)
- host->mrq->cmd->error = MMC_ERR_TIMEOUT;
+ host->mrq->cmd->error = -ETIMEDOUT;
else if (status & SD_STATUS_DT)
- host->mrq->data->error = MMC_ERR_TIMEOUT;
+ host->mrq->data->error = -ETIMEDOUT;
/* In PIO mode, interrupts might still be enabled */
IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH);
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index 54bfc9f2559..6ebc41e7592 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -428,11 +428,11 @@ static int imxmci_finish_data(struct imxmci_host *host, unsigned int stat)
if ( stat & STATUS_ERR_MASK ) {
dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",stat);
if(stat & (STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR))
- data->error = MMC_ERR_BADCRC;
+ data->error = -EILSEQ;
else if(stat & STATUS_TIME_OUT_READ)
- data->error = MMC_ERR_TIMEOUT;
+ data->error = -ETIMEDOUT;
else
- data->error = MMC_ERR_FAILED;
+ data->error = -EIO;
} else {
data->bytes_xfered = host->dma_size;
}
@@ -458,10 +458,10 @@ static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat)
if (stat & STATUS_TIME_OUT_RESP) {
dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n");
- cmd->error = MMC_ERR_TIMEOUT;
+ cmd->error = -ETIMEDOUT;
} else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
dev_dbg(mmc_dev(host->mmc), "cmd crc error\n");
- cmd->error = MMC_ERR_BADCRC;
+ cmd->error = -EILSEQ;
}
if(cmd->flags & MMC_RSP_PRESENT) {
@@ -482,7 +482,7 @@ static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat)
dev_dbg(mmc_dev(host->mmc), "RESP 0x%08x, 0x%08x, 0x%08x, 0x%08x, error %d\n",
cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], cmd->error);
- if (data && (cmd->error == MMC_ERR_NONE) && !(stat & STATUS_ERR_MASK)) {
+ if (data && !cmd->error && !(stat & STATUS_ERR_MASK)) {
if (host->req->data->flags & MMC_DATA_WRITE) {
/* Wait for FIFO to be empty before starting DMA write */
@@ -491,7 +491,7 @@ static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat)
if(imxmci_busy_wait_for_status(host, &stat,
STATUS_APPL_BUFF_FE,
40, "imxmci_cmd_done DMA WR") < 0) {
- cmd->error = MMC_ERR_FIFO;
+ cmd->error = -EIO;
imxmci_finish_data(host, stat);
if(host->req)
imxmci_finish_request(host, host->req);
@@ -884,9 +884,21 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
}
+static int imxmci_get_ro(struct mmc_host *mmc)
+{
+ struct imxmci_host *host = mmc_priv(mmc);
+
+ if (host->pdata && host->pdata->get_ro)
+ return host->pdata->get_ro(mmc_dev(mmc));
+ /* Host doesn't support read only detection so assume writeable */
+ return 0;
+}
+
+
static const struct mmc_host_ops imxmci_ops = {
.request = imxmci_request,
.set_ios = imxmci_set_ios,
+ .get_ro = imxmci_get_ro,
};
static struct resource *platform_device_resource(struct platform_device *dev, unsigned int mask, int nr)
@@ -913,7 +925,7 @@ static void imxmci_check_status(unsigned long data)
{
struct imxmci_host *host = (struct imxmci_host *)data;
- if( host->pdata->card_present() != host->present ) {
+ if( host->pdata->card_present(mmc_dev(host->mmc)) != host->present ) {
host->present ^= 1;
dev_info(mmc_dev(host->mmc), "card %s\n",
host->present ? "inserted" : "removed");
@@ -963,7 +975,7 @@ static int imxmci_probe(struct platform_device *pdev)
mmc->f_min = 150000;
mmc->f_max = CLK_RATE/2;
mmc->ocr_avail = MMC_VDD_32_33;
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_BYTEBLOCK;
+ mmc->caps = MMC_CAP_4_BIT_DATA;
/* MMC core transfer sizes tunable parameters */
mmc->max_hw_segs = 64;
@@ -1022,7 +1034,7 @@ static int imxmci_probe(struct platform_device *pdev)
if (ret)
goto out;
- host->present = host->pdata->card_present();
+ host->present = host->pdata->card_present(mmc_dev(mmc));
init_timer(&host->timer);
host->timer.data = (unsigned long)host;
host->timer.function = imxmci_check_status;
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
new file mode 100644
index 00000000000..f30327bba6f
--- /dev/null
+++ b/drivers/mmc/host/mmc_spi.c
@@ -0,0 +1,1408 @@
+/*
+ * mmc_spi.c - Access SD/MMC cards through SPI master controllers
+ *
+ * (C) Copyright 2005, Intec Automation,
+ * Mike Lavender (mike@steroidmicros)
+ * (C) Copyright 2006-2007, David Brownell
+ * (C) Copyright 2007, Axis Communications,
+ * Hans-Peter Nilsson (hp@axis.com)
+ * (C) Copyright 2007, ATRON electronic GmbH,
+ * Jan Nikitenko <jan.nikitenko@gmail.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
+#include <linux/crc7.h>
+#include <linux/crc-itu-t.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h> /* for R1_SPI_* bit values */
+
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+
+#include <asm/unaligned.h>
+
+
+/* NOTES:
+ *
+ * - For now, we won't try to interoperate with a real mmc/sd/sdio
+ * controller, although some of them do have hardware support for
+ * SPI protocol. The main reason for such configs would be mmc-ish
+ * cards like DataFlash, which don't support that "native" protocol.
+ *
+ * We don't have a "DataFlash/MMC/SD/SDIO card slot" abstraction to
+ * switch between driver stacks, and in any case if "native" mode
+ * is available, it will be faster and hence preferable.
+ *
+ * - MMC depends on a different chipselect management policy than the
+ * SPI interface currently supports for shared bus segments: it needs
+ * to issue multiple spi_message requests with the chipselect active,
+ * using the results of one message to decide the next one to issue.
+ *
+ * Pending updates to the programming interface, this driver expects
+ * that it not share the bus with other drivers (precluding conflicts).
+ *
+ * - We tell the controller to keep the chipselect active from the
+ * beginning of an mmc_host_ops.request until the end. So beware
+ * of SPI controller drivers that mis-handle the cs_change flag!
+ *
+ * However, many cards seem OK with chipselect flapping up/down
+ * during that time ... at least on unshared bus segments.
+ */
+
+
+/*
+ * Local protocol constants, internal to data block protocols.
+ */
+
+/* Response tokens used to ack each block written: */
+#define SPI_MMC_RESPONSE_CODE(x) ((x) & 0x1f)
+#define SPI_RESPONSE_ACCEPTED ((2 << 1)|1)
+#define SPI_RESPONSE_CRC_ERR ((5 << 1)|1)
+#define SPI_RESPONSE_WRITE_ERR ((6 << 1)|1)
+
+/* Read and write blocks start with these tokens and end with crc;
+ * on error, read tokens act like a subset of R2_SPI_* values.
+ */
+#define SPI_TOKEN_SINGLE 0xfe /* single block r/w, multiblock read */
+#define SPI_TOKEN_MULTI_WRITE 0xfc /* multiblock write */
+#define SPI_TOKEN_STOP_TRAN 0xfd /* terminate multiblock write */
+
+#define MMC_SPI_BLOCKSIZE 512
+
+
+/* These fixed timeouts come from the latest SD specs, which say to ignore
+ * the CSD values. The R1B value is for card erase (e.g. the "I forgot the
+ * card's password" scenario); it's mostly applied to STOP_TRANSMISSION after
+ * reads which takes nowhere near that long. Older cards may be able to use
+ * shorter timeouts ... but why bother?
+ */
+#define readblock_timeout ktime_set(0, 100 * 1000 * 1000)
+#define writeblock_timeout ktime_set(0, 250 * 1000 * 1000)
+#define r1b_timeout ktime_set(3, 0)
+
+
+/****************************************************************************/
+
+/*
+ * Local Data Structures
+ */
+
+/* "scratch" is per-{command,block} data exchanged with the card */
+struct scratch {
+ u8 status[29];
+ u8 data_token;
+ __be16 crc_val;
+};
+
+struct mmc_spi_host {
+ struct mmc_host *mmc;
+ struct spi_device *spi;
+
+ unsigned char power_mode;
+ u16 powerup_msecs;
+
+ struct mmc_spi_platform_data *pdata;
+
+ /* for bulk data transfers */
+ struct spi_transfer token, t, crc, early_status;
+ struct spi_message m;
+
+ /* for status readback */
+ struct spi_transfer status;
+ struct spi_message readback;
+
+ /* underlying DMA-aware controller, or null */
+ struct device *dma_dev;
+
+ /* buffer used for commands and for message "overhead" */
+ struct scratch *data;
+ dma_addr_t data_dma;
+
+ /* Specs say to write ones most of the time, even when the card
+ * has no need to read its input data; and many cards won't care.
+ * This is our source of those ones.
+ */
+ void *ones;
+ dma_addr_t ones_dma;
+};
+
+
+/****************************************************************************/
+
+/*
+ * MMC-over-SPI protocol glue, used by the MMC stack interface
+ */
+
+static inline int mmc_cs_off(struct mmc_spi_host *host)
+{
+ /* chipselect will always be inactive after setup() */
+ return spi_setup(host->spi);
+}
+
+static int
+mmc_spi_readbytes(struct mmc_spi_host *host, unsigned len)
+{
+ int status;
+
+ if (len > sizeof(*host->data)) {
+ WARN_ON(1);
+ return -EIO;
+ }
+
+ host->status.len = len;
+
+ if (host->dma_dev)
+ dma_sync_single_for_device(host->dma_dev,
+ host->data_dma, sizeof(*host->data),
+ DMA_FROM_DEVICE);
+
+ status = spi_sync(host->spi, &host->readback);
+ if (status == 0)
+ status = host->readback.status;
+
+ if (host->dma_dev)
+ dma_sync_single_for_cpu(host->dma_dev,
+ host->data_dma, sizeof(*host->data),
+ DMA_FROM_DEVICE);
+
+ return status;
+}
+
+static int
+mmc_spi_skip(struct mmc_spi_host *host, ktime_t timeout, unsigned n, u8 byte)
+{
+ u8 *cp = host->data->status;
+
+ timeout = ktime_add(timeout, ktime_get());
+
+ while (1) {
+ int status;
+ unsigned i;
+
+ status = mmc_spi_readbytes(host, n);
+ if (status < 0)
+ return status;
+
+ for (i = 0; i < n; i++) {
+ if (cp[i] != byte)
+ return cp[i];
+ }
+
+ /* REVISIT investigate msleep() to avoid busy-wait I/O
+ * in at least some cases.
+ */
+ if (ktime_to_ns(ktime_sub(ktime_get(), timeout)) > 0)
+ break;
+ }
+ return -ETIMEDOUT;
+}
+
+static inline int
+mmc_spi_wait_unbusy(struct mmc_spi_host *host, ktime_t timeout)
+{
+ return mmc_spi_skip(host, timeout, sizeof(host->data->status), 0);
+}
+
+static int mmc_spi_readtoken(struct mmc_spi_host *host)
+{
+ return mmc_spi_skip(host, readblock_timeout, 1, 0xff);
+}
+
+
+/*
+ * Note that for SPI, cmd->resp[0] is not the same data as "native" protocol
+ * hosts return! The low byte holds R1_SPI bits. The next byte may hold
+ * R2_SPI bits ... for SEND_STATUS, or after data read errors.
+ *
+ * cmd->resp[1] holds any four-byte response, for R3 (READ_OCR) and on
+ * newer cards R7 (IF_COND).
+ */
+
+static char *maptype(struct mmc_command *cmd)
+{
+ switch (mmc_spi_resp_type(cmd)) {
+ case MMC_RSP_SPI_R1: return "R1";
+ case MMC_RSP_SPI_R1B: return "R1B";
+ case MMC_RSP_SPI_R2: return "R2/R5";
+ case MMC_RSP_SPI_R3: return "R3/R4/R7";
+ default: return "?";
+ }
+}
+
+/* return zero, else negative errno after setting cmd->error */
+static int mmc_spi_response_get(struct mmc_spi_host *host,
+ struct mmc_command *cmd, int cs_on)
+{
+ u8 *cp = host->data->status;
+ u8 *end = cp + host->t.len;
+ int value = 0;
+ char tag[32];
+
+ snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s",
+ cmd->opcode, maptype(cmd));
+
+ /* Except for data block reads, the whole response will already
+ * be stored in the scratch buffer. It's somewhere after the
+ * command and the first byte we read after it. We ignore that
+ * first byte. After STOP_TRANSMISSION command it may include
+ * two data bits, but otherwise it's all ones.
+ */
+ cp += 8;
+ while (cp < end && *cp == 0xff)
+ cp++;
+
+ /* Data block reads (R1 response types) may need more data... */
+ if (cp == end) {
+ unsigned i;
+
+ cp = host->data->status;
+
+ /* Card sends N(CR) (== 1..8) bytes of all-ones then one
+ * status byte ... and we already scanned 2 bytes.
+ *
+ * REVISIT block read paths use nasty byte-at-a-time I/O
+ * so it can always DMA directly into the target buffer.
+ * It'd probably be better to memcpy() the first chunk and
+ * avoid extra i/o calls...
+ */
+ for (i = 2; i < 9; i++) {
+ value = mmc_spi_readbytes(host, 1);
+ if (value < 0)
+ goto done;
+ if (*cp != 0xff)
+ goto checkstatus;
+ }
+ value = -ETIMEDOUT;
+ goto done;
+ }
+
+checkstatus:
+ if (*cp & 0x80) {
+ dev_dbg(&host->spi->dev, "%s: INVALID RESPONSE, %02x\n",
+ tag, *cp);
+ value = -EBADR;
+ goto done;
+ }
+
+ cmd->resp[0] = *cp++;
+ cmd->error = 0;
+
+ /* Status byte: the entire seven-bit R1 response. */
+ if (cmd->resp[0] != 0) {
+ if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS
+ | R1_SPI_ILLEGAL_COMMAND)
+ & cmd->resp[0])
+ value = -EINVAL;
+ else if (R1_SPI_COM_CRC & cmd->resp[0])
+ value = -EILSEQ;
+ else if ((R1_SPI_ERASE_SEQ | R1_SPI_ERASE_RESET)
+ & cmd->resp[0])
+ value = -EIO;
+ /* else R1_SPI_IDLE, "it's resetting" */
+ }
+
+ switch (mmc_spi_resp_type(cmd)) {
+
+ /* SPI R1B == R1 + busy; STOP_TRANSMISSION (for multiblock reads)
+ * and less-common stuff like various erase operations.
+ */
+ case MMC_RSP_SPI_R1B:
+ /* maybe we read all the busy tokens already */
+ while (cp < end && *cp == 0)
+ cp++;
+ if (cp == end)
+ mmc_spi_wait_unbusy(host, r1b_timeout);
+ break;
+
+ /* SPI R2 == R1 + second status byte; SEND_STATUS
+ * SPI R5 == R1 + data byte; IO_RW_DIRECT
+ */
+ case MMC_RSP_SPI_R2:
+ cmd->resp[0] |= *cp << 8;
+ break;
+
+ /* SPI R3, R4, or R7 == R1 + 4 bytes */
+ case MMC_RSP_SPI_R3:
+ cmd->resp[1] = be32_to_cpu(get_unaligned((u32 *)cp));
+ break;
+
+ /* SPI R1 == just one status byte */
+ case MMC_RSP_SPI_R1:
+ break;
+
+ default:
+ dev_dbg(&host->spi->dev, "bad response type %04x\n",
+ mmc_spi_resp_type(cmd));
+ if (value >= 0)
+ value = -EINVAL;
+ goto done;
+ }
+
+ if (value < 0)
+ dev_dbg(&host->spi->dev, "%s: resp %04x %08x\n",
+ tag, cmd->resp[0], cmd->resp[1]);
+
+ /* disable chipselect on errors and some success cases */
+ if (value >= 0 && cs_on)
+ return value;
+done:
+ if (value < 0)
+ cmd->error = value;
+ mmc_cs_off(host);
+ return value;
+}
+
+/* Issue command and read its response.
+ * Returns zero on success, negative for error.
+ *
+ * On error, caller must cope with mmc core retry mechanism. That
+ * means immediate low-level resubmit, which affects the bus lock...
+ */
+static int
+mmc_spi_command_send(struct mmc_spi_host *host,
+ struct mmc_request *mrq,
+ struct mmc_command *cmd, int cs_on)
+{
+ struct scratch *data = host->data;
+ u8 *cp = data->status;
+ u32 arg = cmd->arg;
+ int status;
+ struct spi_transfer *t;
+
+ /* We can handle most commands (except block reads) in one full
+ * duplex I/O operation before either starting the next transfer
+ * (data block or command) or else deselecting the card.
+ *
+ * First, write 7 bytes:
+ * - an all-ones byte to ensure the card is ready
+ * - opcode byte (plus start and transmission bits)
+ * - four bytes of big-endian argument
+ * - crc7 (plus end bit) ... always computed, it's cheap
+ *
+ * We init the whole buffer to all-ones, which is what we need
+ * to write while we're reading (later) response data.
+ */
+ memset(cp++, 0xff, sizeof(data->status));
+
+ *cp++ = 0x40 | cmd->opcode;
+ *cp++ = (u8)(arg >> 24);
+ *cp++ = (u8)(arg >> 16);
+ *cp++ = (u8)(arg >> 8);
+ *cp++ = (u8)arg;
+ *cp++ = (crc7(0, &data->status[1], 5) << 1) | 0x01;
+
+ /* Then, read up to 13 bytes (while writing all-ones):
+ * - N(CR) (== 1..8) bytes of all-ones
+ * - status byte (for all response types)
+ * - the rest of the response, either:
+ * + nothing, for R1 or R1B responses
+ * + second status byte, for R2 responses
+ * + four data bytes, for R3 and R7 responses
+ *
+ * Finally, read some more bytes ... in the nice cases we know in
+ * advance how many, and reading 1 more is always OK:
+ * - N(EC) (== 0..N) bytes of all-ones, before deselect/finish
+ * - N(RC) (== 1..N) bytes of all-ones, before next command
+ * - N(WR) (== 1..N) bytes of all-ones, before data write
+ *
+ * So in those cases one full duplex I/O of at most 21 bytes will
+ * handle the whole command, leaving the card ready to receive a
+ * data block or new command. We do that whenever we can, shaving
+ * CPU and IRQ costs (especially when using DMA or FIFOs).
+ *
+ * There are two other cases, where it's not generally practical
+ * to rely on a single I/O:
+ *
+ * - R1B responses need at least N(EC) bytes of all-zeroes.
+ *
+ * In this case we can *try* to fit it into one I/O, then
+ * maybe read more data later.
+ *
+ * - Data block reads are more troublesome, since a variable
+ * number of padding bytes precede the token and data.
+ * + N(CX) (== 0..8) bytes of all-ones, before CSD or CID
+ * + N(AC) (== 1..many) bytes of all-ones
+ *
+ * In this case we currently only have minimal speedups here:
+ * when N(CR) == 1 we can avoid I/O in response_get().
+ */
+ if (cs_on && (mrq->data->flags & MMC_DATA_READ)) {
+ cp += 2; /* min(N(CR)) + status */
+ /* R1 */
+ } else {
+ cp += 10; /* max(N(CR)) + status + min(N(RC),N(WR)) */
+ if (cmd->flags & MMC_RSP_SPI_S2) /* R2/R5 */
+ cp++;
+ else if (cmd->flags & MMC_RSP_SPI_B4) /* R3/R4/R7 */
+ cp += 4;
+ else if (cmd->flags & MMC_RSP_BUSY) /* R1B */
+ cp = data->status + sizeof(data->status);
+ /* else: R1 (most commands) */
+ }
+
+ dev_dbg(&host->spi->dev, " mmc_spi: CMD%d, resp %s\n",
+ cmd->opcode, maptype(cmd));
+
+ /* send command, leaving chipselect active */
+ spi_message_init(&host->m);
+
+ t = &host->t;
+ memset(t, 0, sizeof(*t));
+ t->tx_buf = t->rx_buf = data->status;
+ t->tx_dma = t->rx_dma = host->data_dma;
+ t->len = cp - data->status;
+ t->cs_change = 1;
+ spi_message_add_tail(t, &host->m);
+
+ if (host->dma_dev) {
+ host->m.is_dma_mapped = 1;
+ dma_sync_single_for_device(host->dma_dev,
+ host->data_dma, sizeof(*host->data),
+ DMA_BIDIRECTIONAL);
+ }
+ status = spi_sync(host->spi, &host->m);
+ if (status == 0)
+ status = host->m.status;
+
+ if (host->dma_dev)
+ dma_sync_single_for_cpu(host->dma_dev,
+ host->data_dma, sizeof(*host->data),
+ DMA_BIDIRECTIONAL);
+ if (status < 0) {
+ dev_dbg(&host->spi->dev, " ... write returned %d\n", status);
+ cmd->error = status;
+ return status;
+ }
+
+ /* after no-data commands and STOP_TRANSMISSION, chipselect off */
+ return mmc_spi_response_get(host, cmd, cs_on);
+}
+
+/* Build data message with up to four separate transfers. For TX, we
+ * start by writing the data token. And in most cases, we finish with
+ * a status transfer.
+ *
+ * We always provide TX data for data and CRC. The MMC/SD protocol
+ * requires us to write ones; but Linux defaults to writing zeroes;
+ * so we explicitly initialize it to all ones on RX paths.
+ *
+ * We also handle DMA mapping, so the underlying SPI controller does
+ * not need to (re)do it for each message.
+ */
+static void
+mmc_spi_setup_data_message(
+ struct mmc_spi_host *host,
+ int multiple,
+ enum dma_data_direction direction)
+{
+ struct spi_transfer *t;
+ struct scratch *scratch = host->data;
+ dma_addr_t dma = host->data_dma;
+
+ spi_message_init(&host->m);
+ if (dma)
+ host->m.is_dma_mapped = 1;
+
+ /* for reads, readblock() skips 0xff bytes before finding
+ * the token; for writes, this transfer issues that token.
+ */
+ if (direction == DMA_TO_DEVICE) {
+ t = &host->token;
+ memset(t, 0, sizeof(*t));
+ t->len = 1;
+ if (multiple)
+ scratch->data_token = SPI_TOKEN_MULTI_WRITE;
+ else
+ scratch->data_token = SPI_TOKEN_SINGLE;
+ t->tx_buf = &scratch->data_token;
+ if (dma)
+ t->tx_dma = dma + offsetof(struct scratch, data_token);
+ spi_message_add_tail(t, &host->m);
+ }
+
+ /* Body of transfer is buffer, then CRC ...
+ * either TX-only, or RX with TX-ones.
+ */
+ t = &host->t;
+ memset(t, 0, sizeof(*t));
+ t->tx_buf = host->ones;
+ t->tx_dma = host->ones_dma;
+ /* length and actual buffer info are written later */
+ spi_message_add_tail(t, &host->m);
+
+ t = &host->crc;
+ memset(t, 0, sizeof(*t));
+ t->len = 2;
+ if (direction == DMA_TO_DEVICE) {
+ /* the actual CRC may get written later */
+ t->tx_buf = &scratch->crc_val;
+ if (dma)
+ t->tx_dma = dma + offsetof(struct scratch, crc_val);
+ } else {
+ t->tx_buf = host->ones;
+ t->tx_dma = host->ones_dma;
+ t->rx_buf = &scratch->crc_val;
+ if (dma)
+ t->rx_dma = dma + offsetof(struct scratch, crc_val);
+ }
+ spi_message_add_tail(t, &host->m);
+
+ /*
+ * A single block read is followed by N(EC) [0+] all-ones bytes
+ * before deselect ... don't bother.
+ *
+ * Multiblock reads are followed by N(AC) [1+] all-ones bytes before
+ * the next block is read, or a STOP_TRANSMISSION is issued. We'll
+ * collect that single byte, so readblock() doesn't need to.
+ *
+ * For a write, the one-byte data response follows immediately, then
+ * come zero or more busy bytes, then N(WR) [1+] all-ones bytes.
+ * Then single block reads may deselect, and multiblock ones issue
+ * the next token (next data block, or STOP_TRAN). We can try to
+ * minimize I/O ops by using a single read to collect end-of-busy.
+ */
+ if (multiple || direction == DMA_TO_DEVICE) {
+ t = &host->early_status;
+ memset(t, 0, sizeof(*t));
+ t->len = (direction == DMA_TO_DEVICE)
+ ? sizeof(scratch->status)
+ : 1;
+ t->tx_buf = host->ones;
+ t->tx_dma = host->ones_dma;
+ t->rx_buf = scratch->status;
+ if (dma)
+ t->rx_dma = dma + offsetof(struct scratch, status);
+ t->cs_change = 1;
+ spi_message_add_tail(t, &host->m);
+ }
+}
+
+/*
+ * Write one block:
+ * - caller handled preceding N(WR) [1+] all-ones bytes
+ * - data block
+ * + token
+ * + data bytes
+ * + crc16
+ * - an all-ones byte ... card writes a data-response byte
+ * - followed by N(EC) [0+] all-ones bytes, card writes zero/'busy'
+ *
+ * Return negative errno, else success.
+ */
+static int
+mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t)
+{
+ struct spi_device *spi = host->spi;
+ int status, i;
+ struct scratch *scratch = host->data;
+
+ if (host->mmc->use_spi_crc)
+ scratch->crc_val = cpu_to_be16(
+ crc_itu_t(0, t->tx_buf, t->len));
+ if (host->dma_dev)
+ dma_sync_single_for_device(host->dma_dev,
+ host->data_dma, sizeof(*scratch),
+ DMA_BIDIRECTIONAL);
+
+ status = spi_sync(spi, &host->m);
+ if (status == 0)
+ status = host->m.status;
+
+ if (status != 0) {
+ dev_dbg(&spi->dev, "write error (%d)\n", status);
+ return status;
+ }
+
+ if (host->dma_dev)
+ dma_sync_single_for_cpu(host->dma_dev,
+ host->data_dma, sizeof(*scratch),
+ DMA_BIDIRECTIONAL);
+
+ /*
+ * Get the transmission data-response reply. It must follow
+ * immediately after the data block we transferred. This reply
+ * doesn't necessarily tell whether the write operation succeeded;
+ * it just says if the transmission was ok and whether *earlier*
+ * writes succeeded; see the standard.
+ */
+ switch (SPI_MMC_RESPONSE_CODE(scratch->status[0])) {
+ case SPI_RESPONSE_ACCEPTED:
+ status = 0;
+ break;
+ case SPI_RESPONSE_CRC_ERR:
+ /* host shall then issue MMC_STOP_TRANSMISSION */
+ status = -EILSEQ;
+ break;
+ case SPI_RESPONSE_WRITE_ERR:
+ /* host shall then issue MMC_STOP_TRANSMISSION,
+ * and should MMC_SEND_STATUS to sort it out
+ */
+ status = -EIO;
+ break;
+ default:
+ status = -EPROTO;
+ break;
+ }
+ if (status != 0) {
+ dev_dbg(&spi->dev, "write error %02x (%d)\n",
+ scratch->status[0], status);
+ return status;
+ }
+
+ t->tx_buf += t->len;
+ if (host->dma_dev)
+ t->tx_dma += t->len;
+
+ /* Return when not busy. If we didn't collect that status yet,
+ * we'll need some more I/O.
+ */
+ for (i = 1; i < sizeof(scratch->status); i++) {
+ if (scratch->status[i] != 0)
+ return 0;
+ }
+ return mmc_spi_wait_unbusy(host, writeblock_timeout);
+}
+
+/*
+ * Read one block:
+ * - skip leading all-ones bytes ... either
+ * + N(AC) [1..f(clock,CSD)] usually, else
+ * + N(CX) [0..8] when reading CSD or CID
+ * - data block
+ * + token ... if error token, no data or crc
+ * + data bytes
+ * + crc16
+ *
+ * After single block reads, we're done; N(EC) [0+] all-ones bytes follow
+ * before dropping chipselect.
+ *
+ * For multiblock reads, caller either reads the next block or issues a
+ * STOP_TRANSMISSION command.
+ */
+static int
+mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t)
+{
+ struct spi_device *spi = host->spi;
+ int status;
+ struct scratch *scratch = host->data;
+
+ /* At least one SD card sends an all-zeroes byte when N(CX)
+ * applies, before the all-ones bytes ... just cope with that.
+ */
+ status = mmc_spi_readbytes(host, 1);
+ if (status < 0)
+ return status;
+ status = scratch->status[0];
+ if (status == 0xff || status == 0)
+ status = mmc_spi_readtoken(host);
+
+ if (status == SPI_TOKEN_SINGLE) {
+ if (host->dma_dev) {
+ dma_sync_single_for_device(host->dma_dev,
+ host->data_dma, sizeof(*scratch),
+ DMA_BIDIRECTIONAL);
+ dma_sync_single_for_device(host->dma_dev,
+ t->rx_dma, t->len,
+ DMA_FROM_DEVICE);
+ }
+
+ status = spi_sync(spi, &host->m);
+ if (status == 0)
+ status = host->m.status;
+
+ if (host->dma_dev) {
+ dma_sync_single_for_cpu(host->dma_dev,
+ host->data_dma, sizeof(*scratch),
+ DMA_BIDIRECTIONAL);
+ dma_sync_single_for_cpu(host->dma_dev,
+ t->rx_dma, t->len,
+ DMA_FROM_DEVICE);
+ }
+
+ } else {
+ dev_dbg(&spi->dev, "read error %02x (%d)\n", status, status);
+
+ /* we've read extra garbage, timed out, etc */
+ if (status < 0)
+ return status;
+
+ /* low four bits are an R2 subset, fifth seems to be
+ * vendor specific ... map them all to generic error..
+ */
+ return -EIO;
+ }
+
+ if (host->mmc->use_spi_crc) {
+ u16 crc = crc_itu_t(0, t->rx_buf, t->len);
+
+ be16_to_cpus(&scratch->crc_val);
+ if (scratch->crc_val != crc) {
+ dev_dbg(&spi->dev, "read - crc error: crc_val=0x%04x, "
+ "computed=0x%04x len=%d\n",
+ scratch->crc_val, crc, t->len);
+ return -EILSEQ;
+ }
+ }
+
+ t->rx_buf += t->len;
+ if (host->dma_dev)
+ t->rx_dma += t->len;
+
+ return 0;
+}
+
+/*
+ * An MMC/SD data stage includes one or more blocks, optional CRCs,
+ * and inline handshaking. That handhaking makes it unlike most
+ * other SPI protocol stacks.
+ */
+static void
+mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
+ struct mmc_data *data, u32 blk_size)
+{
+ struct spi_device *spi = host->spi;
+ struct device *dma_dev = host->dma_dev;
+ struct spi_transfer *t;
+ enum dma_data_direction direction;
+ struct scatterlist *sg;
+ unsigned n_sg;
+ int multiple = (data->blocks > 1);
+
+ if (data->flags & MMC_DATA_READ)
+ direction = DMA_FROM_DEVICE;
+ else
+ direction = DMA_TO_DEVICE;
+ mmc_spi_setup_data_message(host, multiple, direction);
+ t = &host->t;
+
+ /* Handle scatterlist segments one at a time, with synch for
+ * each 512-byte block
+ */
+ for (sg = data->sg, n_sg = data->sg_len; n_sg; n_sg--, sg++) {
+ int status = 0;
+ dma_addr_t dma_addr = 0;
+ void *kmap_addr;
+ unsigned length = sg->length;
+ enum dma_data_direction dir = direction;
+
+ /* set up dma mapping for controller drivers that might
+ * use DMA ... though they may fall back to PIO
+ */
+ if (dma_dev) {
+ /* never invalidate whole *shared* pages ... */
+ if ((sg->offset != 0 || length != PAGE_SIZE)
+ && dir == DMA_FROM_DEVICE)
+ dir = DMA_BIDIRECTIONAL;
+
+ dma_addr = dma_map_page(dma_dev, sg->page, 0,
+ PAGE_SIZE, dir);
+ if (direction == DMA_TO_DEVICE)
+ t->tx_dma = dma_addr + sg->offset;
+ else
+ t->rx_dma = dma_addr + sg->offset;
+ }
+
+ /* allow pio too; we don't allow highmem */
+ kmap_addr = kmap(sg->page);
+ if (direction == DMA_TO_DEVICE)
+ t->tx_buf = kmap_addr + sg->offset;
+ else
+ t->rx_buf = kmap_addr + sg->offset;
+
+ /* transfer each block, and update request status */
+ while (length) {
+ t->len = min(length, blk_size);
+
+ dev_dbg(&host->spi->dev,
+ " mmc_spi: %s block, %d bytes\n",
+ (direction == DMA_TO_DEVICE)
+ ? "write"
+ : "read",
+ t->len);
+
+ if (direction == DMA_TO_DEVICE)
+ status = mmc_spi_writeblock(host, t);
+ else
+ status = mmc_spi_readblock(host, t);
+ if (status < 0)
+ break;
+
+ data->bytes_xfered += t->len;
+ length -= t->len;
+
+ if (!multiple)
+ break;
+ }
+
+ /* discard mappings */
+ if (direction == DMA_FROM_DEVICE)
+ flush_kernel_dcache_page(sg->page);
+ kunmap(sg->page);
+ if (dma_dev)
+ dma_unmap_page(dma_dev, dma_addr, PAGE_SIZE, dir);
+
+ if (status < 0) {
+ data->error = status;
+ dev_dbg(&spi->dev, "%s status %d\n",
+ (direction == DMA_TO_DEVICE)
+ ? "write" : "read",
+ status);
+ break;
+ }
+ }
+
+ /* NOTE some docs describe an MMC-only SET_BLOCK_COUNT (CMD23) that
+ * can be issued before multiblock writes. Unlike its more widely
+ * documented analogue for SD cards (SET_WR_BLK_ERASE_COUNT, ACMD23),
+ * that can affect the STOP_TRAN logic. Complete (and current)
+ * MMC specs should sort that out before Linux starts using CMD23.
+ */
+ if (direction == DMA_TO_DEVICE && multiple) {
+ struct scratch *scratch = host->data;
+ int tmp;
+ const unsigned statlen = sizeof(scratch->status);
+
+ dev_dbg(&spi->dev, " mmc_spi: STOP_TRAN\n");
+
+ /* Tweak the per-block message we set up earlier by morphing
+ * it to hold single buffer with the token followed by some
+ * all-ones bytes ... skip N(BR) (0..1), scan the rest for
+ * "not busy any longer" status, and leave chip selected.
+ */
+ INIT_LIST_HEAD(&host->m.transfers);
+ list_add(&host->early_status.transfer_list,
+ &host->m.transfers);
+
+ memset(scratch->status, 0xff, statlen);
+ scratch->status[0] = SPI_TOKEN_STOP_TRAN;
+
+ host->early_status.tx_buf = host->early_status.rx_buf;
+ host->early_status.tx_dma = host->early_status.rx_dma;
+ host->early_status.len = statlen;
+
+ if (host->dma_dev)
+ dma_sync_single_for_device(host->dma_dev,
+ host->data_dma, sizeof(*scratch),
+ DMA_BIDIRECTIONAL);
+
+ tmp = spi_sync(spi, &host->m);
+ if (tmp == 0)
+ tmp = host->m.status;
+
+ if (host->dma_dev)
+ dma_sync_single_for_cpu(host->dma_dev,
+ host->data_dma, sizeof(*scratch),
+ DMA_BIDIRECTIONAL);
+
+ if (tmp < 0) {
+ if (!data->error)
+ data->error = tmp;
+ return;
+ }
+
+ /* Ideally we collected "not busy" status with one I/O,
+ * avoiding wasteful byte-at-a-time scanning... but more
+ * I/O is often needed.
+ */
+ for (tmp = 2; tmp < statlen; tmp++) {
+ if (scratch->status[tmp] != 0)
+ return;
+ }
+ tmp = mmc_spi_wait_unbusy(host, writeblock_timeout);
+ if (tmp < 0 && !data->error)
+ data->error = tmp;
+ }
+}
+
+/****************************************************************************/
+
+/*
+ * MMC driver implementation -- the interface to the MMC stack
+ */
+
+static void mmc_spi_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct mmc_spi_host *host = mmc_priv(mmc);
+ int status = -EINVAL;
+
+#ifdef DEBUG
+ /* MMC core and layered drivers *MUST* issue SPI-aware commands */
+ {
+ struct mmc_command *cmd;
+ int invalid = 0;
+
+ cmd = mrq->cmd;
+ if (!mmc_spi_resp_type(cmd)) {
+ dev_dbg(&host->spi->dev, "bogus command\n");
+ cmd->error = -EINVAL;
+ invalid = 1;
+ }
+
+ cmd = mrq->stop;
+ if (cmd && !mmc_spi_resp_type(cmd)) {
+ dev_dbg(&host->spi->dev, "bogus STOP command\n");
+ cmd->error = -EINVAL;
+ invalid = 1;
+ }
+
+ if (invalid) {
+ dump_stack();
+ mmc_request_done(host->mmc, mrq);
+ return;
+ }
+ }
+#endif
+
+ /* issue command; then optionally data and stop */
+ status = mmc_spi_command_send(host, mrq, mrq->cmd, mrq->data != NULL);
+ if (status == 0 && mrq->data) {
+ mmc_spi_data_do(host, mrq->cmd, mrq->data, mrq->data->blksz);
+ if (mrq->stop)
+ status = mmc_spi_command_send(host, mrq, mrq->stop, 0);
+ else
+ mmc_cs_off(host);
+ }
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+/* See Section 6.4.1, in SD "Simplified Physical Layer Specification 2.0"
+ *
+ * NOTE that here we can't know that the card has just been powered up;
+ * not all MMC/SD sockets support power switching.
+ *
+ * FIXME when the card is still in SPI mode, e.g. from a previous kernel,
+ * this doesn't seem to do the right thing at all...
+ */
+static void mmc_spi_initsequence(struct mmc_spi_host *host)
+{
+ /* Try to be very sure any previous command has completed;
+ * wait till not-busy, skip debris from any old commands.
+ */
+ mmc_spi_wait_unbusy(host, r1b_timeout);
+ mmc_spi_readbytes(host, 10);
+
+ /*
+ * Do a burst with chipselect active-high. We need to do this to
+ * meet the requirement of 74 clock cycles with both chipselect
+ * and CMD (MOSI) high before CMD0 ... after the card has been
+ * powered up to Vdd(min), and so is ready to take commands.
+ *
+ * Some cards are particularly needy of this (e.g. Viking "SD256")
+ * while most others don't seem to care.
+ *
+ * Note that this is one of the places MMC/SD plays games with the
+ * SPI protocol. Another is that when chipselect is released while
+ * the card returns BUSY status, the clock must issue several cycles
+ * with chipselect high before the card will stop driving its output.
+ */
+ host->spi->mode |= SPI_CS_HIGH;
+ if (spi_setup(host->spi) != 0) {
+ /* Just warn; most cards work without it. */
+ dev_warn(&host->spi->dev,
+ "can't change chip-select polarity\n");
+ host->spi->mode &= ~SPI_CS_HIGH;
+ } else {
+ mmc_spi_readbytes(host, 18);
+
+ host->spi->mode &= ~SPI_CS_HIGH;
+ if (spi_setup(host->spi) != 0) {
+ /* Wot, we can't get the same setup we had before? */
+ dev_err(&host->spi->dev,
+ "can't restore chip-select polarity\n");
+ }
+ }
+}
+
+static char *mmc_powerstring(u8 power_mode)
+{
+ switch (power_mode) {
+ case MMC_POWER_OFF: return "off";
+ case MMC_POWER_UP: return "up";
+ case MMC_POWER_ON: return "on";
+ }
+ return "?";
+}
+
+static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct mmc_spi_host *host = mmc_priv(mmc);
+
+ if (host->power_mode != ios->power_mode) {
+ int canpower;
+
+ canpower = host->pdata && host->pdata->setpower;
+
+ dev_dbg(&host->spi->dev, "mmc_spi: power %s (%d)%s\n",
+ mmc_powerstring(ios->power_mode),
+ ios->vdd,
+ canpower ? ", can switch" : "");
+
+ /* switch power on/off if possible, accounting for
+ * max 250msec powerup time if needed.
+ */
+ if (canpower) {
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ case MMC_POWER_UP:
+ host->pdata->setpower(&host->spi->dev,
+ ios->vdd);
+ if (ios->power_mode == MMC_POWER_UP)
+ msleep(host->powerup_msecs);
+ }
+ }
+
+ /* See 6.4.1 in the simplified SD card physical spec 2.0 */
+ if (ios->power_mode == MMC_POWER_ON)
+ mmc_spi_initsequence(host);
+
+ /* If powering down, ground all card inputs to avoid power
+ * delivery from data lines! On a shared SPI bus, this
+ * will probably be temporary; 6.4.2 of the simplified SD
+ * spec says this must last at least 1msec.
+ *
+ * - Clock low means CPOL 0, e.g. mode 0
+ * - MOSI low comes from writing zero
+ * - Chipselect is usually active low...
+ */
+ if (canpower && ios->power_mode == MMC_POWER_OFF) {
+ int mres;
+
+ host->spi->mode &= ~(SPI_CPOL|SPI_CPHA);
+ mres = spi_setup(host->spi);
+ if (mres < 0)
+ dev_dbg(&host->spi->dev,
+ "switch to SPI mode 0 failed\n");
+
+ if (spi_w8r8(host->spi, 0x00) < 0)
+ dev_dbg(&host->spi->dev,
+ "put spi signals to low failed\n");
+
+ /*
+ * Now clock should be low due to spi mode 0;
+ * MOSI should be low because of written 0x00;
+ * chipselect should be low (it is active low)
+ * power supply is off, so now MMC is off too!
+ *
+ * FIXME no, chipselect can be high since the
+ * device is inactive and SPI_CS_HIGH is clear...
+ */
+ msleep(10);
+ if (mres == 0) {
+ host->spi->mode |= (SPI_CPOL|SPI_CPHA);
+ mres = spi_setup(host->spi);
+ if (mres < 0)
+ dev_dbg(&host->spi->dev,
+ "switch back to SPI mode 3"
+ " failed\n");
+ }
+ }
+
+ host->power_mode = ios->power_mode;
+ }
+
+ if (host->spi->max_speed_hz != ios->clock && ios->clock != 0) {
+ int status;
+
+ host->spi->max_speed_hz = ios->clock;
+ status = spi_setup(host->spi);
+ dev_dbg(&host->spi->dev,
+ "mmc_spi: clock to %d Hz, %d\n",
+ host->spi->max_speed_hz, status);
+ }
+}
+
+static int mmc_spi_get_ro(struct mmc_host *mmc)
+{
+ struct mmc_spi_host *host = mmc_priv(mmc);
+
+ if (host->pdata && host->pdata->get_ro)
+ return host->pdata->get_ro(mmc->parent);
+ /* board doesn't support read only detection; assume writeable */
+ return 0;
+}
+
+
+static const struct mmc_host_ops mmc_spi_ops = {
+ .request = mmc_spi_request,
+ .set_ios = mmc_spi_set_ios,
+ .get_ro = mmc_spi_get_ro,
+};
+
+
+/****************************************************************************/
+
+/*
+ * SPI driver implementation
+ */
+
+static irqreturn_t
+mmc_spi_detect_irq(int irq, void *mmc)
+{
+ struct mmc_spi_host *host = mmc_priv(mmc);
+ u16 delay_msec = max(host->pdata->detect_delay, (u16)100);
+
+ mmc_detect_change(mmc, msecs_to_jiffies(delay_msec));
+ return IRQ_HANDLED;
+}
+
+static int mmc_spi_probe(struct spi_device *spi)
+{
+ void *ones;
+ struct mmc_host *mmc;
+ struct mmc_spi_host *host;
+ int status;
+
+ /* MMC and SD specs only seem to care that sampling is on the
+ * rising edge ... meaning SPI modes 0 or 3. So either SPI mode
+ * should be legit. We'll use mode 0 since it seems to be a
+ * bit less troublesome on some hardware ... unclear why.
+ */
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+
+ status = spi_setup(spi);
+ if (status < 0) {
+ dev_dbg(&spi->dev, "needs SPI mode %02x, %d KHz; %d\n",
+ spi->mode, spi->max_speed_hz / 1000,
+ status);
+ return status;
+ }
+
+ /* We can use the bus safely iff nobody else will interfere with
+ * us. That is, either we have the experimental exclusive access
+ * primitives ... or else there's nobody to share it with.
+ */
+ if (spi->master->num_chipselect > 1) {
+ struct device *parent = spi->dev.parent;
+
+ /* If there are multiple devices on this bus, we
+ * can't proceed.
+ */
+ spin_lock(&parent->klist_children.k_lock);
+ if (parent->klist_children.k_list.next
+ != parent->klist_children.k_list.prev)
+ status = -EMLINK;
+ else
+ status = 0;
+ spin_unlock(&parent->klist_children.k_lock);
+ if (status < 0) {
+ dev_err(&spi->dev, "can't share SPI bus\n");
+ return status;
+ }
+
+ /* REVISIT we can't guarantee another device won't
+ * be added later. It's uncommon though ... for now,
+ * work as if this is safe.
+ */
+ dev_warn(&spi->dev, "ASSUMING unshared SPI bus!\n");
+ }
+
+ /* We need a supply of ones to transmit. This is the only time
+ * the CPU touches these, so cache coherency isn't a concern.
+ *
+ * NOTE if many systems use more than one MMC-over-SPI connector
+ * it'd save some memory to share this. That's evidently rare.
+ */
+ status = -ENOMEM;
+ ones = kmalloc(MMC_SPI_BLOCKSIZE, GFP_KERNEL);
+ if (!ones)
+ goto nomem;
+ memset(ones, 0xff, MMC_SPI_BLOCKSIZE);
+
+ mmc = mmc_alloc_host(sizeof(*host), &spi->dev);
+ if (!mmc)
+ goto nomem;
+
+ mmc->ops = &mmc_spi_ops;
+ mmc->max_blk_size = MMC_SPI_BLOCKSIZE;
+
+ /* As long as we keep track of the number of successfully
+ * transmitted blocks, we're good for multiwrite.
+ */
+ mmc->caps = MMC_CAP_SPI | MMC_CAP_MULTIWRITE;
+
+ /* SPI doesn't need the lowspeed device identification thing for
+ * MMC or SD cards, since it never comes up in open drain mode.
+ * That's good; some SPI masters can't handle very low speeds!
+ *
+ * However, low speed SDIO cards need not handle over 400 KHz;
+ * that's the only reason not to use a few MHz for f_min (until
+ * the upper layer reads the target frequency from the CSD).
+ */
+ mmc->f_min = 400000;
+ mmc->f_max = spi->max_speed_hz;
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->spi = spi;
+
+ host->ones = ones;
+
+ /* Platform data is used to hook up things like card sensing
+ * and power switching gpios.
+ */
+ host->pdata = spi->dev.platform_data;
+ if (host->pdata)
+ mmc->ocr_avail = host->pdata->ocr_mask;
+ if (!mmc->ocr_avail) {
+ dev_warn(&spi->dev, "ASSUMING 3.2-3.4 V slot power\n");
+ mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
+ }
+ if (host->pdata && host->pdata->setpower) {
+ host->powerup_msecs = host->pdata->powerup_msecs;
+ if (!host->powerup_msecs || host->powerup_msecs > 250)
+ host->powerup_msecs = 250;
+ }
+
+ dev_set_drvdata(&spi->dev, mmc);
+
+ /* preallocate dma buffers */
+ host->data = kmalloc(sizeof(*host->data), GFP_KERNEL);
+ if (!host->data)
+ goto fail_nobuf1;
+
+ if (spi->master->cdev.dev->dma_mask) {
+ struct device *dev = spi->master->cdev.dev;
+
+ host->dma_dev = dev;
+ host->ones_dma = dma_map_single(dev, ones,
+ MMC_SPI_BLOCKSIZE, DMA_TO_DEVICE);
+ host->data_dma = dma_map_single(dev, host->data,
+ sizeof(*host->data), DMA_BIDIRECTIONAL);
+
+ /* REVISIT in theory those map operations can fail... */
+
+ dma_sync_single_for_cpu(host->dma_dev,
+ host->data_dma, sizeof(*host->data),
+ DMA_BIDIRECTIONAL);
+ }
+
+ /* setup message for status/busy readback */
+ spi_message_init(&host->readback);
+ host->readback.is_dma_mapped = (host->dma_dev != NULL);
+
+ spi_message_add_tail(&host->status, &host->readback);
+ host->status.tx_buf = host->ones;
+ host->status.tx_dma = host->ones_dma;
+ host->status.rx_buf = &host->data->status;
+ host->status.rx_dma = host->data_dma + offsetof(struct scratch, status);
+ host->status.cs_change = 1;
+
+ /* register card detect irq */
+ if (host->pdata && host->pdata->init) {
+ status = host->pdata->init(&spi->dev, mmc_spi_detect_irq, mmc);
+ if (status != 0)
+ goto fail_glue_init;
+ }
+
+ status = mmc_add_host(mmc);
+ if (status != 0)
+ goto fail_add_host;
+
+ dev_info(&spi->dev, "SD/MMC host %s%s%s%s\n",
+ mmc->class_dev.bus_id,
+ host->dma_dev ? "" : ", no DMA",
+ (host->pdata && host->pdata->get_ro)
+ ? "" : ", no WP",
+ (host->pdata && host->pdata->setpower)
+ ? "" : ", no poweroff");
+ return 0;
+
+fail_add_host:
+ mmc_remove_host (mmc);
+fail_glue_init:
+ if (host->dma_dev)
+ dma_unmap_single(host->dma_dev, host->data_dma,
+ sizeof(*host->data), DMA_BIDIRECTIONAL);
+ kfree(host->data);
+
+fail_nobuf1:
+ mmc_free_host(mmc);
+ dev_set_drvdata(&spi->dev, NULL);
+
+nomem:
+ kfree(ones);
+ return status;
+}
+
+
+static int __devexit mmc_spi_remove(struct spi_device *spi)
+{
+ struct mmc_host *mmc = dev_get_drvdata(&spi->dev);
+ struct mmc_spi_host *host;
+
+ if (mmc) {
+ host = mmc_priv(mmc);
+
+ /* prevent new mmc_detect_change() calls */
+ if (host->pdata && host->pdata->exit)
+ host->pdata->exit(&spi->dev, mmc);
+
+ mmc_remove_host(mmc);
+
+ if (host->dma_dev) {
+ dma_unmap_single(host->dma_dev, host->ones_dma,
+ MMC_SPI_BLOCKSIZE, DMA_TO_DEVICE);
+ dma_unmap_single(host->dma_dev, host->data_dma,
+ sizeof(*host->data), DMA_BIDIRECTIONAL);
+ }
+
+ kfree(host->data);
+ kfree(host->ones);
+
+ spi->max_speed_hz = mmc->f_max;
+ mmc_free_host(mmc);
+ dev_set_drvdata(&spi->dev, NULL);
+ }
+ return 0;
+}
+
+
+static struct spi_driver mmc_spi_driver = {
+ .driver = {
+ .name = "mmc_spi",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = mmc_spi_probe,
+ .remove = __devexit_p(mmc_spi_remove),
+};
+
+
+static int __init mmc_spi_init(void)
+{
+ return spi_register_driver(&mmc_spi_driver);
+}
+module_init(mmc_spi_init);
+
+
+static void __exit mmc_spi_exit(void)
+{
+ spi_unregister_driver(&mmc_spi_driver);
+}
+module_exit(mmc_spi_exit);
+
+
+MODULE_AUTHOR("Mike Lavender, David Brownell, "
+ "Hans-Peter Nilsson, Jan Nikitenko");
+MODULE_DESCRIPTION("SPI SD/MMC host driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index be730c0a035..d0eb0a2abf4 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -16,6 +16,7 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/highmem.h>
+#include <linux/log2.h>
#include <linux/mmc/host.h>
#include <linux/amba/bus.h>
#include <linux/clk.h>
@@ -154,11 +155,11 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
}
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
if (status & MCI_DATACRCFAIL)
- data->error = MMC_ERR_BADCRC;
+ data->error = -EILSEQ;
else if (status & MCI_DATATIMEOUT)
- data->error = MMC_ERR_TIMEOUT;
+ data->error = -ETIMEDOUT;
else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN))
- data->error = MMC_ERR_FIFO;
+ data->error = -EIO;
status |= MCI_DATAEND;
/*
@@ -193,12 +194,12 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
cmd->resp[3] = readl(base + MMCIRESPONSE3);
if (status & MCI_CMDTIMEOUT) {
- cmd->error = MMC_ERR_TIMEOUT;
+ cmd->error = -ETIMEDOUT;
} else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) {
- cmd->error = MMC_ERR_BADCRC;
+ cmd->error = -EILSEQ;
}
- if (!cmd->data || cmd->error != MMC_ERR_NONE) {
+ if (!cmd->data || cmd->error) {
if (host->data)
mmci_stop_data(host);
mmci_request_end(host, cmd->mrq);
@@ -391,6 +392,14 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
WARN_ON(host->mrq != NULL);
+ if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
+ printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n",
+ mmc_hostname(mmc), mrq->data->blksz);
+ mrq->cmd->error = -EINVAL;
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+
spin_lock_irq(&host->lock);
host->mrq = mrq;
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 0cf97edc5f5..60a67dfcda6 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -263,7 +263,7 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
enum dma_data_direction dma_data_dir;
BUG_ON(host->dma_ch < 0);
- if (data->error != MMC_ERR_NONE)
+ if (data->error)
omap_stop_dma(host->dma_ch);
/* Release DMA channel lazily */
mod_timer(&host->dma_timer, jiffies + HZ);
@@ -368,7 +368,7 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
}
}
- if (host->data == NULL || cmd->error != MMC_ERR_NONE) {
+ if (host->data == NULL || cmd->error) {
host->mrq = NULL;
clk_disable(host->fclk);
mmc_request_done(host->mmc, cmd->mrq);
@@ -475,14 +475,14 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
if (status & OMAP_MMC_STAT_DATA_TOUT) {
dev_dbg(mmc_dev(host->mmc), "data timeout\n");
if (host->data) {
- host->data->error |= MMC_ERR_TIMEOUT;
+ host->data->error = -ETIMEDOUT;
transfer_error = 1;
}
}
if (status & OMAP_MMC_STAT_DATA_CRC) {
if (host->data) {
- host->data->error |= MMC_ERR_BADCRC;
+ host->data->error = -EILSEQ;
dev_dbg(mmc_dev(host->mmc),
"data CRC error, bytes left %d\n",
host->total_bytes_left);
@@ -504,7 +504,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
dev_err(mmc_dev(host->mmc),
"command timeout, CMD %d\n",
host->cmd->opcode);
- host->cmd->error = MMC_ERR_TIMEOUT;
+ host->cmd->error = -ETIMEDOUT;
end_command = 1;
}
}
@@ -514,7 +514,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
dev_err(mmc_dev(host->mmc),
"command CRC error (CMD%d, arg 0x%08x)\n",
host->cmd->opcode, host->cmd->arg);
- host->cmd->error = MMC_ERR_BADCRC;
+ host->cmd->error = -EILSEQ;
end_command = 1;
} else
dev_err(mmc_dev(host->mmc),
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index ff960334b33..657901eecfc 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -142,6 +142,10 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
host->dma_dir);
for (i = 0; i < host->dma_len; i++) {
+ unsigned int length = sg_dma_len(&data->sg[i]);
+ host->sg_cpu[i].dcmd = dcmd | length;
+ if (length & 31 && !(data->flags & MMC_DATA_READ))
+ host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN;
if (data->flags & MMC_DATA_READ) {
host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
@@ -149,7 +153,6 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
host->sg_cpu[i].dsadr = sg_dma_address(&data->sg[i]);
host->sg_cpu[i].dtadr = host->res->start + MMC_TXFIFO;
}
- host->sg_cpu[i].dcmd = dcmd | sg_dma_len(&data->sg[i]);
host->sg_cpu[i].ddadr = host->sg_dma + (i + 1) *
sizeof(struct pxa_dma_desc);
}
@@ -226,7 +229,7 @@ static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
}
if (stat & STAT_TIME_OUT_RESPONSE) {
- cmd->error = MMC_ERR_TIMEOUT;
+ cmd->error = -ETIMEDOUT;
} else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
#ifdef CONFIG_PXA27x
/*
@@ -239,11 +242,11 @@ static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
} else
#endif
- cmd->error = MMC_ERR_BADCRC;
+ cmd->error = -EILSEQ;
}
pxamci_disable_irq(host, END_CMD_RES);
- if (host->data && cmd->error == MMC_ERR_NONE) {
+ if (host->data && !cmd->error) {
pxamci_enable_irq(host, DATA_TRAN_DONE);
} else {
pxamci_finish_request(host, host->mrq);
@@ -264,9 +267,9 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
host->dma_dir);
if (stat & STAT_READ_TIME_OUT)
- data->error = MMC_ERR_TIMEOUT;
+ data->error = -ETIMEDOUT;
else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR))
- data->error = MMC_ERR_BADCRC;
+ data->error = -EILSEQ;
/*
* There appears to be a hardware design bug here. There seems to
@@ -274,7 +277,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
* This means that if there was an error on any block, we mark all
* data blocks as being in error.
*/
- if (data->error == MMC_ERR_NONE)
+ if (!data->error)
data->bytes_xfered = data->blocks * data->blksz;
else
data->bytes_xfered = 0;
@@ -284,7 +287,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
host->data = NULL;
if (host->mrq->stop) {
pxamci_stop_clock(host);
- pxamci_start_cmd(host, host->mrq->stop, 0);
+ pxamci_start_cmd(host, host->mrq->stop, host->cmdat);
} else {
pxamci_finish_request(host, host->mrq);
}
@@ -298,7 +301,7 @@ static irqreturn_t pxamci_irq(int irq, void *devid)
unsigned int ireg;
int handled = 0;
- ireg = readl(host->base + MMC_I_REG);
+ ireg = readl(host->base + MMC_I_REG) & ~readl(host->base + MMC_I_MASK);
if (ireg) {
unsigned stat = readl(host->base + MMC_STAT);
@@ -309,6 +312,10 @@ static irqreturn_t pxamci_irq(int irq, void *devid)
handled |= pxamci_cmd_done(host, stat);
if (ireg & DATA_TRAN_DONE)
handled |= pxamci_data_done(host, stat);
+ if (ireg & SDIO_INT) {
+ mmc_signal_sdio_irq(host->mmc);
+ handled = 1;
+ }
}
return IRQ_RETVAL(handled);
@@ -382,20 +389,46 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
host->cmdat |= CMDAT_INIT;
}
+ if (ios->bus_width == MMC_BUS_WIDTH_4)
+ host->cmdat |= CMDAT_SD_4DAT;
+ else
+ host->cmdat &= ~CMDAT_SD_4DAT;
+
pr_debug("PXAMCI: clkrt = %x cmdat = %x\n",
host->clkrt, host->cmdat);
}
+static void pxamci_enable_sdio_irq(struct mmc_host *host, int enable)
+{
+ struct pxamci_host *pxa_host = mmc_priv(host);
+
+ if (enable)
+ pxamci_enable_irq(pxa_host, SDIO_INT);
+ else
+ pxamci_disable_irq(pxa_host, SDIO_INT);
+}
+
static const struct mmc_host_ops pxamci_ops = {
- .request = pxamci_request,
- .get_ro = pxamci_get_ro,
- .set_ios = pxamci_set_ios,
+ .request = pxamci_request,
+ .get_ro = pxamci_get_ro,
+ .set_ios = pxamci_set_ios,
+ .enable_sdio_irq = pxamci_enable_sdio_irq,
};
static void pxamci_dma_irq(int dma, void *devid)
{
- printk(KERN_ERR "DMA%d: IRQ???\n", dma);
- DCSR(dma) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
+ struct pxamci_host *host = devid;
+ int dcsr = DCSR(dma);
+ DCSR(dma) = dcsr & ~DCSR_STOPIRQEN;
+
+ if (dcsr & DCSR_ENDINTR) {
+ writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
+ } else {
+ printk(KERN_ERR "%s: DMA error on channel %d (DCSR=%#x)\n",
+ mmc_hostname(host->mmc), dma, dcsr);
+ host->data->error = -EIO;
+ pxamci_data_done(host, 0);
+ }
}
static irqreturn_t pxamci_detect_irq(int irq, void *devid)
@@ -444,9 +477,9 @@ static int pxamci_probe(struct platform_device *pdev)
mmc->max_seg_size = PAGE_SIZE;
/*
- * Block length register is 10 bits.
+ * Block length register is only 10 bits before PXA27x.
*/
- mmc->max_blk_size = 1023;
+ mmc->max_blk_size = (cpu_is_pxa21x() || cpu_is_pxa25x()) ? 1023 : 2048;
/*
* Block count register is 16 bits.
@@ -460,6 +493,12 @@ static int pxamci_probe(struct platform_device *pdev)
mmc->ocr_avail = host->pdata ?
host->pdata->ocr_mask :
MMC_VDD_32_33|MMC_VDD_33_34;
+ mmc->caps = 0;
+ host->cmdat = 0;
+ if (!cpu_is_pxa21x() && !cpu_is_pxa25x()) {
+ mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+ host->cmdat |= CMDAT_SDIO_INT_EN;
+ }
host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
if (!host->sg_cpu) {
diff --git a/drivers/mmc/host/pxamci.h b/drivers/mmc/host/pxamci.h
index df17c281278..3153e779d46 100644
--- a/drivers/mmc/host/pxamci.h
+++ b/drivers/mmc/host/pxamci.h
@@ -25,6 +25,8 @@
#define SPI_EN (1 << 0)
#define MMC_CMDAT 0x0010
+#define CMDAT_SDIO_INT_EN (1 << 11)
+#define CMDAT_SD_4DAT (1 << 8)
#define CMDAT_DMAEN (1 << 7)
#define CMDAT_INIT (1 << 6)
#define CMDAT_BUSY (1 << 5)
diff --git a/drivers/mmc/host/ricoh_mmc.c b/drivers/mmc/host/ricoh_mmc.c
new file mode 100644
index 00000000000..1e8704533bc
--- /dev/null
+++ b/drivers/mmc/host/ricoh_mmc.c
@@ -0,0 +1,151 @@
+/*
+ * ricoh_mmc.c - Dummy driver to disable the Rioch MMC controller.
+ *
+ * Copyright (C) 2007 Philip Langdale, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+/*
+ * This is a conceptually ridiculous driver, but it is required by the way
+ * the Ricoh multi-function R5C832 works. This chip implements firewire
+ * and four different memory card controllers. Two of those controllers are
+ * an SDHCI controller and a proprietary MMC controller. The linux SDHCI
+ * driver supports MMC cards but the chip detects MMC cards in hardware
+ * and directs them to the MMC controller - so the SDHCI driver never sees
+ * them. To get around this, we must disable the useless MMC controller.
+ * At that point, the SDHCI controller will start seeing them. As a bonus,
+ * a detection event occurs immediately, even if the MMC card is already
+ * in the reader.
+ *
+ * The relevant registers live on the firewire function, so this is unavoidably
+ * ugly. Such is life.
+ */
+
+#include <linux/pci.h>
+
+#define DRIVER_NAME "ricoh-mmc"
+
+static const struct pci_device_id pci_ids[] __devinitdata = {
+ {
+ .vendor = PCI_VENDOR_ID_RICOH,
+ .device = PCI_DEVICE_ID_RICOH_R5C843,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
+ { /* end: all zeroes */ },
+};
+
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ u8 rev;
+
+ struct pci_dev *fw_dev = NULL;
+
+ BUG_ON(pdev == NULL);
+ BUG_ON(ent == NULL);
+
+ pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
+
+ printk(KERN_INFO DRIVER_NAME
+ ": Ricoh MMC controller found at %s [%04x:%04x] (rev %x)\n",
+ pci_name(pdev), (int)pdev->vendor, (int)pdev->device,
+ (int)rev);
+
+ while ((fw_dev = pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, fw_dev))) {
+ if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
+ pdev->bus == fw_dev->bus) {
+ u8 write_enable;
+ u8 disable;
+
+ pci_read_config_byte(fw_dev, 0xCB, &disable);
+ if (disable & 0x02) {
+ printk(KERN_INFO DRIVER_NAME
+ ": Controller already disabled. Nothing to do.\n");
+ return -ENODEV;
+ }
+
+ pci_read_config_byte(fw_dev, 0xCA, &write_enable);
+ pci_write_config_byte(fw_dev, 0xCA, 0x57);
+ pci_write_config_byte(fw_dev, 0xCB, disable | 0x02);
+ pci_write_config_byte(fw_dev, 0xCA, write_enable);
+
+ pci_set_drvdata(pdev, fw_dev);
+
+ printk(KERN_INFO DRIVER_NAME
+ ": Controller is now disabled.\n");
+
+ break;
+ }
+ }
+
+ if (pci_get_drvdata(pdev) == NULL) {
+ printk(KERN_WARNING DRIVER_NAME
+ ": Main firewire function not found. Cannot disable controller.\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void __devexit ricoh_mmc_remove(struct pci_dev *pdev)
+{
+ u8 write_enable;
+ u8 disable;
+ struct pci_dev *fw_dev = NULL;
+
+ fw_dev = pci_get_drvdata(pdev);
+ BUG_ON(fw_dev == NULL);
+
+ pci_read_config_byte(fw_dev, 0xCA, &write_enable);
+ pci_read_config_byte(fw_dev, 0xCB, &disable);
+ pci_write_config_byte(fw_dev, 0xCA, 0x57);
+ pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02);
+ pci_write_config_byte(fw_dev, 0xCA, write_enable);
+
+ printk(KERN_INFO DRIVER_NAME
+ ": Controller is now re-enabled.\n");
+
+ pci_set_drvdata(pdev, NULL);
+}
+
+static struct pci_driver ricoh_mmc_driver = {
+ .name = DRIVER_NAME,
+ .id_table = pci_ids,
+ .probe = ricoh_mmc_probe,
+ .remove = __devexit_p(ricoh_mmc_remove),
+};
+
+/*****************************************************************************\
+ * *
+ * Driver init/exit *
+ * *
+\*****************************************************************************/
+
+static int __init ricoh_mmc_drv_init(void)
+{
+ printk(KERN_INFO DRIVER_NAME
+ ": Ricoh MMC Controller disabling driver\n");
+ printk(KERN_INFO DRIVER_NAME ": Copyright(c) Philip Langdale\n");
+
+ return pci_register_driver(&ricoh_mmc_driver);
+}
+
+static void __exit ricoh_mmc_drv_exit(void)
+{
+ pci_unregister_driver(&ricoh_mmc_driver);
+}
+
+module_init(ricoh_mmc_drv_init);
+module_exit(ricoh_mmc_drv_exit);
+
+MODULE_AUTHOR("Philip Langdale <philipl@alumni.utexas.net>");
+MODULE_DESCRIPTION("Ricoh MMC Controller disabling driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 20a7d89e01b..b397121b947 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -25,8 +25,6 @@
#define DBG(f, x...) \
pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
-static unsigned int debug_nodma = 0;
-static unsigned int debug_forcedma = 0;
static unsigned int debug_quirks = 0;
#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
@@ -35,6 +33,7 @@ static unsigned int debug_quirks = 0;
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
+#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
static const struct pci_device_id pci_ids[] __devinitdata = {
{
@@ -68,7 +67,8 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
.device = PCI_DEVICE_ID_ENE_CB712_SD,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE,
+ .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
+ SDHCI_QUIRK_BROKEN_DMA,
},
{
@@ -76,7 +76,8 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
.device = PCI_DEVICE_ID_ENE_CB712_SD_2,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE,
+ .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
+ SDHCI_QUIRK_BROKEN_DMA,
},
{
@@ -132,7 +133,7 @@ static void sdhci_dumpregs(struct sdhci_host *host)
readb(host->ioaddr + SDHCI_POWER_CONTROL),
readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL));
printk(KERN_DEBUG DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
- readb(host->ioaddr + SDHCI_WALK_UP_CONTROL),
+ readb(host->ioaddr + SDHCI_WAKE_UP_CONTROL),
readw(host->ioaddr + SDHCI_CLOCK_CONTROL));
printk(KERN_DEBUG DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
readb(host->ioaddr + SDHCI_TIMEOUT_CONTROL),
@@ -481,16 +482,16 @@ static void sdhci_finish_data(struct sdhci_host *host)
* Controller doesn't count down when in single block mode.
*/
if (data->blocks == 1)
- blocks = (data->error == MMC_ERR_NONE) ? 0 : 1;
+ blocks = (data->error == 0) ? 0 : 1;
else
blocks = readw(host->ioaddr + SDHCI_BLOCK_COUNT);
data->bytes_xfered = data->blksz * (data->blocks - blocks);
- if ((data->error == MMC_ERR_NONE) && blocks) {
+ if (!data->error && blocks) {
printk(KERN_ERR "%s: Controller signalled completion even "
"though there were blocks left.\n",
mmc_hostname(host->mmc));
- data->error = MMC_ERR_FAILED;
+ data->error = -EIO;
}
if (data->stop) {
@@ -498,7 +499,7 @@ static void sdhci_finish_data(struct sdhci_host *host)
* The controller needs a reset of internal state machines
* upon error conditions.
*/
- if (data->error != MMC_ERR_NONE) {
+ if (data->error) {
sdhci_reset(host, SDHCI_RESET_CMD);
sdhci_reset(host, SDHCI_RESET_DATA);
}
@@ -533,7 +534,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
printk(KERN_ERR "%s: Controller never released "
"inhibit bit(s).\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
- cmd->error = MMC_ERR_FAILED;
+ cmd->error = -EIO;
tasklet_schedule(&host->finish_tasklet);
return;
}
@@ -554,7 +555,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
printk(KERN_ERR "%s: Unsupported response type!\n",
mmc_hostname(host->mmc));
- cmd->error = MMC_ERR_INVALID;
+ cmd->error = -EINVAL;
tasklet_schedule(&host->finish_tasklet);
return;
}
@@ -601,7 +602,7 @@ static void sdhci_finish_command(struct sdhci_host *host)
}
}
- host->cmd->error = MMC_ERR_NONE;
+ host->cmd->error = 0;
if (host->data && host->data_early)
sdhci_finish_data(host);
@@ -722,7 +723,7 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->mrq = mrq;
if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
- host->mrq->cmd->error = MMC_ERR_TIMEOUT;
+ host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
} else
sdhci_send_command(host, mrq->cmd);
@@ -800,10 +801,35 @@ static int sdhci_get_ro(struct mmc_host *mmc)
return !(present & SDHCI_WRITE_PROTECT);
}
+static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct sdhci_host *host;
+ unsigned long flags;
+ u32 ier;
+
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ ier = readl(host->ioaddr + SDHCI_INT_ENABLE);
+
+ ier &= ~SDHCI_INT_CARD_INT;
+ if (enable)
+ ier |= SDHCI_INT_CARD_INT;
+
+ writel(ier, host->ioaddr + SDHCI_INT_ENABLE);
+ writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
+
+ mmiowb();
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
static const struct mmc_host_ops sdhci_ops = {
.request = sdhci_request,
.set_ios = sdhci_set_ios,
.get_ro = sdhci_get_ro,
+ .enable_sdio_irq = sdhci_enable_sdio_irq,
};
/*****************************************************************************\
@@ -831,7 +857,7 @@ static void sdhci_tasklet_card(unsigned long param)
sdhci_reset(host, SDHCI_RESET_CMD);
sdhci_reset(host, SDHCI_RESET_DATA);
- host->mrq->cmd->error = MMC_ERR_FAILED;
+ host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
}
}
@@ -859,9 +885,9 @@ static void sdhci_tasklet_finish(unsigned long param)
* The controller needs a reset of internal state machines
* upon error conditions.
*/
- if ((mrq->cmd->error != MMC_ERR_NONE) ||
- (mrq->data && ((mrq->data->error != MMC_ERR_NONE) ||
- (mrq->data->stop && (mrq->data->stop->error != MMC_ERR_NONE))))) {
+ if (mrq->cmd->error ||
+ (mrq->data && (mrq->data->error ||
+ (mrq->data->stop && mrq->data->stop->error)))) {
/* Some controllers need this kick or reset won't work here */
if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
@@ -906,13 +932,13 @@ static void sdhci_timeout_timer(unsigned long data)
sdhci_dumpregs(host);
if (host->data) {
- host->data->error = MMC_ERR_TIMEOUT;
+ host->data->error = -ETIMEDOUT;
sdhci_finish_data(host);
} else {
if (host->cmd)
- host->cmd->error = MMC_ERR_TIMEOUT;
+ host->cmd->error = -ETIMEDOUT;
else
- host->mrq->cmd->error = MMC_ERR_TIMEOUT;
+ host->mrq->cmd->error = -ETIMEDOUT;
tasklet_schedule(&host->finish_tasklet);
}
@@ -941,13 +967,12 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
}
if (intmask & SDHCI_INT_TIMEOUT)
- host->cmd->error = MMC_ERR_TIMEOUT;
- else if (intmask & SDHCI_INT_CRC)
- host->cmd->error = MMC_ERR_BADCRC;
- else if (intmask & (SDHCI_INT_END_BIT | SDHCI_INT_INDEX))
- host->cmd->error = MMC_ERR_FAILED;
+ host->cmd->error = -ETIMEDOUT;
+ else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
+ SDHCI_INT_INDEX))
+ host->cmd->error = -EILSEQ;
- if (host->cmd->error != MMC_ERR_NONE)
+ if (host->cmd->error)
tasklet_schedule(&host->finish_tasklet);
else if (intmask & SDHCI_INT_RESPONSE)
sdhci_finish_command(host);
@@ -974,13 +999,11 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
}
if (intmask & SDHCI_INT_DATA_TIMEOUT)
- host->data->error = MMC_ERR_TIMEOUT;
- else if (intmask & SDHCI_INT_DATA_CRC)
- host->data->error = MMC_ERR_BADCRC;
- else if (intmask & SDHCI_INT_DATA_END_BIT)
- host->data->error = MMC_ERR_FAILED;
+ host->data->error = -ETIMEDOUT;
+ else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
+ host->data->error = -EILSEQ;
- if (host->data->error != MMC_ERR_NONE)
+ if (host->data->error)
sdhci_finish_data(host);
else {
if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
@@ -1015,6 +1038,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
irqreturn_t result;
struct sdhci_host* host = dev_id;
u32 intmask;
+ int cardint = 0;
spin_lock(&host->lock);
@@ -1059,6 +1083,11 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
intmask &= ~SDHCI_INT_BUS_POWER;
+ if (intmask & SDHCI_INT_CARD_INT)
+ cardint = 1;
+
+ intmask &= ~SDHCI_INT_CARD_INT;
+
if (intmask) {
printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
mmc_hostname(host->mmc), intmask);
@@ -1073,6 +1102,12 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
out:
spin_unlock(&host->lock);
+ /*
+ * We have to delay this as it calls back into the driver.
+ */
+ if (cardint)
+ mmc_signal_sdio_irq(host->mmc);
+
return result;
}
@@ -1258,20 +1293,26 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
- if (debug_nodma)
- DBG("DMA forced off\n");
- else if (debug_forcedma) {
- DBG("DMA forced on\n");
- host->flags |= SDHCI_USE_DMA;
- } else if (chip->quirks & SDHCI_QUIRK_FORCE_DMA)
+ if (chip->quirks & SDHCI_QUIRK_FORCE_DMA)
host->flags |= SDHCI_USE_DMA;
- else if ((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA)
- DBG("Controller doesn't have DMA interface\n");
else if (!(caps & SDHCI_CAN_DO_DMA))
DBG("Controller doesn't have DMA capability\n");
else
host->flags |= SDHCI_USE_DMA;
+ if ((chip->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
+ (host->flags & SDHCI_USE_DMA)) {
+ DBG("Disabling DMA as it is marked broken");
+ host->flags &= ~SDHCI_USE_DMA;
+ }
+
+ if (((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
+ (host->flags & SDHCI_USE_DMA)) {
+ printk(KERN_WARNING "%s: Will use DMA "
+ "mode even though HW doesn't fully "
+ "claim to support it.\n", host->slot_descr);
+ }
+
if (host->flags & SDHCI_USE_DMA) {
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "%s: No suitable DMA available. "
@@ -1312,7 +1353,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
mmc->ops = &sdhci_ops;
mmc->f_min = host->max_clk / 256;
mmc->f_max = host->max_clk;
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_BYTEBLOCK;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_SDIO_IRQ;
if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
@@ -1565,14 +1606,10 @@ static void __exit sdhci_drv_exit(void)
module_init(sdhci_drv_init);
module_exit(sdhci_drv_exit);
-module_param(debug_nodma, uint, 0444);
-module_param(debug_forcedma, uint, 0444);
module_param(debug_quirks, uint, 0444);
MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
MODULE_DESCRIPTION("Secure Digital Host Controller Interface driver");
MODULE_LICENSE("GPL");
-MODULE_PARM_DESC(debug_nodma, "Forcefully disable DMA transfers. (default 0)");
-MODULE_PARM_DESC(debug_forcedma, "Forcefully enable DMA transfers. (default 0)");
MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index e28987d6d2e..05195ea900f 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -81,7 +81,7 @@
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
-#define SDHCI_WALK_UP_CONTROL 0x2B
+#define SDHCI_WAKE_UP_CONTROL 0x2B
#define SDHCI_CLOCK_CONTROL 0x2C
#define SDHCI_DIVIDER_SHIFT 8
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index 8b736e96844..9b904795eb7 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -16,6 +16,7 @@
#include <linux/mmc/host.h>
#include <linux/highmem.h>
#include <linux/scatterlist.h>
+#include <linux/log2.h>
#include <asm/io.h>
#define DRIVER_NAME "tifm_sd"
@@ -404,14 +405,14 @@ static void tifm_sd_check_status(struct tifm_sd *host)
struct tifm_dev *sock = host->dev;
struct mmc_command *cmd = host->req->cmd;
- if (cmd->error != MMC_ERR_NONE)
+ if (cmd->error)
goto finish_request;
if (!(host->cmd_flags & CMD_READY))
return;
if (cmd->data) {
- if (cmd->data->error != MMC_ERR_NONE) {
+ if (cmd->data->error) {
if ((host->cmd_flags & SCMD_ACTIVE)
&& !(host->cmd_flags & SCMD_READY))
return;
@@ -504,7 +505,7 @@ static void tifm_sd_card_event(struct tifm_dev *sock)
{
struct tifm_sd *host;
unsigned int host_status = 0;
- int cmd_error = MMC_ERR_NONE;
+ int cmd_error = 0;
struct mmc_command *cmd = NULL;
unsigned long flags;
@@ -521,15 +522,15 @@ static void tifm_sd_card_event(struct tifm_dev *sock)
writel(host_status & TIFM_MMCSD_ERRMASK,
sock->addr + SOCK_MMCSD_STATUS);
if (host_status & TIFM_MMCSD_CTO)
- cmd_error = MMC_ERR_TIMEOUT;
+ cmd_error = -ETIMEDOUT;
else if (host_status & TIFM_MMCSD_CCRC)
- cmd_error = MMC_ERR_BADCRC;
+ cmd_error = -EILSEQ;
if (cmd->data) {
if (host_status & TIFM_MMCSD_DTO)
- cmd->data->error = MMC_ERR_TIMEOUT;
+ cmd->data->error = -ETIMEDOUT;
else if (host_status & TIFM_MMCSD_DCRC)
- cmd->data->error = MMC_ERR_BADCRC;
+ cmd->data->error = -EILSEQ;
}
writel(TIFM_FIFO_INT_SETALL,
@@ -626,14 +627,21 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq)
spin_lock_irqsave(&sock->lock, flags);
if (host->eject) {
- spin_unlock_irqrestore(&sock->lock, flags);
+ mrq->cmd->error = -ENOMEDIUM;
goto err_out;
}
if (host->req) {
printk(KERN_ERR "%s : unfinished request detected\n",
sock->dev.bus_id);
- spin_unlock_irqrestore(&sock->lock, flags);
+ mrq->cmd->error = -ETIMEDOUT;
+ goto err_out;
+ }
+
+ if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
+ printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n",
+ sock->dev.bus_id, mrq->data->blksz);
+ mrq->cmd->error = -EINVAL;
goto err_out;
}
@@ -722,7 +730,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq)
return;
err_out:
- mrq->cmd->error = MMC_ERR_TIMEOUT;
+ spin_unlock_irqrestore(&sock->lock, flags);
mmc_request_done(mmc, mrq);
}
@@ -1012,9 +1020,9 @@ static void tifm_sd_remove(struct tifm_dev *sock)
writel(TIFM_FIFO_INT_SETALL,
sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR);
writel(0, sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET);
- host->req->cmd->error = MMC_ERR_TIMEOUT;
+ host->req->cmd->error = -ENOMEDIUM;
if (host->req->stop)
- host->req->stop->error = MMC_ERR_TIMEOUT;
+ host->req->stop->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
}
spin_unlock_irqrestore(&sock->lock, flags);
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 9bf2a877113..80db11c05f2 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -317,7 +317,7 @@ static inline void wbsd_get_short_reply(struct wbsd_host *host,
* Correct response type?
*/
if (wbsd_read_index(host, WBSD_IDX_RSPLEN) != WBSD_RSP_SHORT) {
- cmd->error = MMC_ERR_INVALID;
+ cmd->error = -EILSEQ;
return;
}
@@ -337,7 +337,7 @@ static inline void wbsd_get_long_reply(struct wbsd_host *host,
* Correct response type?
*/
if (wbsd_read_index(host, WBSD_IDX_RSPLEN) != WBSD_RSP_LONG) {
- cmd->error = MMC_ERR_INVALID;
+ cmd->error = -EILSEQ;
return;
}
@@ -372,7 +372,7 @@ static void wbsd_send_command(struct wbsd_host *host, struct mmc_command *cmd)
for (i = 3; i >= 0; i--)
outb((cmd->arg >> (i * 8)) & 0xff, host->base + WBSD_CMDR);
- cmd->error = MMC_ERR_NONE;
+ cmd->error = 0;
/*
* Wait for the request to complete.
@@ -392,13 +392,13 @@ static void wbsd_send_command(struct wbsd_host *host, struct mmc_command *cmd)
/* Card removed? */
if (isr & WBSD_INT_CARD)
- cmd->error = MMC_ERR_TIMEOUT;
+ cmd->error = -ENOMEDIUM;
/* Timeout? */
else if (isr & WBSD_INT_TIMEOUT)
- cmd->error = MMC_ERR_TIMEOUT;
+ cmd->error = -ETIMEDOUT;
/* CRC? */
else if ((cmd->flags & MMC_RSP_CRC) && (isr & WBSD_INT_CRC))
- cmd->error = MMC_ERR_BADCRC;
+ cmd->error = -EILSEQ;
/* All ok */
else {
if (cmd->flags & MMC_RSP_136)
@@ -585,7 +585,7 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH);
wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF);
} else {
- data->error = MMC_ERR_INVALID;
+ data->error = -EINVAL;
return;
}
@@ -607,7 +607,7 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
*/
BUG_ON(size > 0x10000);
if (size > 0x10000) {
- data->error = MMC_ERR_INVALID;
+ data->error = -EINVAL;
return;
}
@@ -669,7 +669,7 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
}
}
- data->error = MMC_ERR_NONE;
+ data->error = 0;
}
static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data)
@@ -724,8 +724,8 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data)
"%d bytes left.\n",
mmc_hostname(host->mmc), count);
- if (data->error == MMC_ERR_NONE)
- data->error = MMC_ERR_FAILED;
+ if (!data->error)
+ data->error = -EIO;
} else {
/*
* Transfer data from DMA buffer to
@@ -735,7 +735,7 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data)
wbsd_dma_to_sg(host, data);
}
- if (data->error != MMC_ERR_NONE) {
+ if (data->error) {
if (data->bytes_xfered)
data->bytes_xfered -= data->blksz;
}
@@ -767,11 +767,10 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->mrq = mrq;
/*
- * If there is no card in the slot then
- * timeout immediatly.
+ * Check that there is actually a card in the slot.
*/
if (!(host->flags & WBSD_FCARD_PRESENT)) {
- cmd->error = MMC_ERR_TIMEOUT;
+ cmd->error = -ENOMEDIUM;
goto done;
}
@@ -807,7 +806,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
"supported by this controller.\n",
mmc_hostname(host->mmc), cmd->opcode);
#endif
- cmd->error = MMC_ERR_INVALID;
+ cmd->error = -EINVAL;
goto done;
};
@@ -819,7 +818,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
if (cmd->data) {
wbsd_prepare_data(host, cmd->data);
- if (cmd->data->error != MMC_ERR_NONE)
+ if (cmd->data->error)
goto done;
}
@@ -830,7 +829,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
* will be finished after the data has
* transfered.
*/
- if (cmd->data && (cmd->error == MMC_ERR_NONE)) {
+ if (cmd->data && !cmd->error) {
/*
* Dirty fix for hardware bug.
*/
@@ -1033,7 +1032,7 @@ static void wbsd_tasklet_card(unsigned long param)
mmc_hostname(host->mmc));
wbsd_reset(host);
- host->mrq->cmd->error = MMC_ERR_FAILED;
+ host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
}
@@ -1097,7 +1096,7 @@ static void wbsd_tasklet_crc(unsigned long param)
DBGF("CRC error\n");
- data->error = MMC_ERR_BADCRC;
+ data->error = -EILSEQ;
tasklet_schedule(&host->finish_tasklet);
@@ -1121,7 +1120,7 @@ static void wbsd_tasklet_timeout(unsigned long param)
DBGF("Timeout\n");
- data->error = MMC_ERR_TIMEOUT;
+ data->error = -ETIMEDOUT;
tasklet_schedule(&host->finish_tasklet);
@@ -1220,7 +1219,7 @@ static int __devinit wbsd_alloc_mmc(struct device *dev)
mmc->f_min = 375000;
mmc->f_max = 24000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_BYTEBLOCK;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE;
spin_lock_init(&host->lock);
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index d590a99930f..2305cc450a4 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -45,7 +45,7 @@
#include "cpqphp.h"
#include "cpqphp_nvram.h"
-#include "../../../arch/i386/pci/pci.h" /* horrible hack showing how processor dependent we are... */
+#include "../../../arch/x86/pci/pci.h" /* horrible hack showing how processor dependent we are... */
/* Global variables */
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
index fc7c74d7259..3f6cd20e95d 100644
--- a/drivers/pci/hotplug/cpqphp_pci.c
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -37,7 +37,7 @@
#include "../pci.h"
#include "cpqphp.h"
#include "cpqphp_nvram.h"
-#include "../../../arch/i386/pci/pci.h" /* horrible hack showing how processor dependent we are... */
+#include "../../../arch/x86/pci/pci.h" /* horrible hack showing how processor dependent we are... */
u8 cpqhp_nic_irq;
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 0316eeaaeb2..a90c28d0c69 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -35,7 +35,7 @@
#include <linux/delay.h>
#include <linux/wait.h>
#include "../pci.h"
-#include "../../../arch/i386/pci/pci.h" /* for struct irq_routing_table */
+#include "../../../arch/x86/pci/pci.h" /* for struct irq_routing_table */
#include "ibmphp.h"
#define attn_on(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_ATTNON)
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 66c92bc36f3..6f475b60986 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -86,10 +86,8 @@ static void bfin_serial_stop_tx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-#ifdef CONFIG_BF54x
while (!(UART_GET_LSR(uart) & TEMT))
continue;
-#endif
#ifdef CONFIG_SERIAL_BFIN_DMA
disable_dma(uart->tx_dma_channel);
@@ -128,8 +126,8 @@ static void bfin_serial_start_tx(struct uart_port *port)
ier = UART_GET_IER(uart);
ier |= ETBEI;
UART_PUT_IER(uart, ier);
- bfin_serial_tx_chars(uart);
#endif
+ bfin_serial_tx_chars(uart);
#endif
}
@@ -139,18 +137,21 @@ static void bfin_serial_start_tx(struct uart_port *port)
static void bfin_serial_stop_rx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT) {
+#endif
#ifdef CONFIG_BF54x
UART_CLEAR_IER(uart, ERBFI);
#else
unsigned short ier;
ier = UART_GET_IER(uart);
-#ifdef CONFIG_KGDB_UART
- if (uart->port.line != CONFIG_KGDB_UART_PORT)
-#endif
ier &= ~ERBFI;
UART_PUT_IER(uart, ier);
#endif
+#ifdef CONFIG_KGDB_UART
+ }
+#endif
}
/*
@@ -173,12 +174,15 @@ void kgdb_put_debug_char(int chr)
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
while (!(UART_GET_LSR(uart) & THRE)) {
- __builtin_bfin_ssync();
+ SSYNC();
}
+
+#ifndef CONFIG_BF54x
UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
- __builtin_bfin_ssync();
+ SSYNC();
+#endif
UART_PUT_CHAR(uart, (unsigned char)chr);
- __builtin_bfin_ssync();
+ SSYNC();
}
int kgdb_get_debug_char(void)
@@ -192,12 +196,14 @@ int kgdb_get_debug_char(void)
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
while(!(UART_GET_LSR(uart) & DR)) {
- __builtin_bfin_ssync();
+ SSYNC();
}
+#ifndef CONFIG_BF54x
UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
- __builtin_bfin_ssync();
+ SSYNC();
+#endif
chr = UART_GET_CHAR(uart);
- __builtin_bfin_ssync();
+ SSYNC();
return chr;
}
@@ -225,12 +231,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
{
struct tty_struct *tty = uart->port.info->tty;
unsigned int status, ch, flg;
+ static int in_break = 0;
#ifdef CONFIG_KGDB_UART
struct pt_regs *regs = get_irq_regs();
#endif
-#ifdef BF533_FAMILY
- static int in_break = 0;
-#endif
status = UART_GET_LSR(uart);
ch = UART_GET_CHAR(uart);
@@ -256,29 +260,30 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
}
}
#endif
-
-#ifdef BF533_FAMILY
- /* The BF533 family of processors have a nice misbehavior where
- * they continuously generate characters for a "single" break.
- * We have to basically ignore this flood until the "next" valid
- * character comes across. All other Blackfin families operate
- * properly though.
- */
- if (in_break) {
- if (ch != 0) {
- in_break = 0;
- ch = UART_GET_CHAR(uart);
- if (bfin_revid() < 5)
+
+ if (ANOMALY_05000230) {
+ /* The BF533 family of processors have a nice misbehavior where
+ * they continuously generate characters for a "single" break.
+ * We have to basically ignore this flood until the "next" valid
+ * character comes across. All other Blackfin families operate
+ * properly though.
+ * Note: While Anomaly 05000230 does not directly address this,
+ * the changes that went in for it also fixed this issue.
+ */
+ if (in_break) {
+ if (ch != 0) {
+ in_break = 0;
+ ch = UART_GET_CHAR(uart);
+ if (bfin_revid() < 5)
+ return;
+ } else
return;
- } else
- return;
+ }
}
-#endif
if (status & BI) {
-#ifdef BF533_FAMILY
- in_break = 1;
-#endif
+ if (ANOMALY_05000230)
+ in_break = 1;
uart->port.icount.brk++;
if (uart_handle_break(&uart->port))
goto ignore_char;
@@ -697,17 +702,19 @@ static int bfin_serial_startup(struct uart_port *port)
uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
add_timer(&(uart->rx_dma_timer));
#else
+ if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
+ "BFIN_UART_RX", uart)) {
# ifdef CONFIG_KGDB_UART
- if (uart->port.line != CONFIG_KGDB_UART_PORT && request_irq
-# else
- if (request_irq
+ if (uart->port.line != CONFIG_KGDB_UART_PORT) {
# endif
- (uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
- "BFIN_UART_RX", uart)) {
printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
return -EBUSY;
+# ifdef CONFIG_KGDB_UART
+ }
+# endif
}
+
if (request_irq
(uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
"BFIN_UART_TX", uart)) {
@@ -962,30 +969,6 @@ static void __init bfin_serial_init_ports(void)
}
#ifdef CONFIG_SERIAL_BFIN_CONSOLE
-static void bfin_serial_console_putchar(struct uart_port *port, int ch)
-{
- struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- while (!(UART_GET_LSR(uart) & THRE))
- barrier();
- UART_PUT_CHAR(uart, ch);
- SSYNC();
-}
-
-/*
- * Interrupts are disabled on entering
- */
-static void
-bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
-{
- struct bfin_serial_port *uart = &bfin_serial_ports[co->index];
- int flags = 0;
-
- spin_lock_irqsave(&uart->port.lock, flags);
- uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
- spin_unlock_irqrestore(&uart->port.lock, flags);
-
-}
-
/*
* If the port was already initialised (eg, by a boot loader),
* try to determine the current setup.
@@ -1038,19 +1021,25 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
}
pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits);
}
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+static struct uart_driver bfin_serial_reg;
static int __init
bfin_serial_console_setup(struct console *co, char *options)
{
struct bfin_serial_port *uart;
+# ifdef CONFIG_SERIAL_BFIN_CONSOLE
int baud = 57600;
int bits = 8;
int parity = 'n';
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+# ifdef CONFIG_SERIAL_BFIN_CTSRTS
int flow = 'r';
-#else
+# else
int flow = 'n';
-#endif
+# endif
+# endif
/*
* Check whether an invalid uart number has been specified, and
@@ -1061,15 +1050,45 @@ bfin_serial_console_setup(struct console *co, char *options)
co->index = 0;
uart = &bfin_serial_ports[co->index];
+# ifdef CONFIG_SERIAL_BFIN_CONSOLE
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
bfin_serial_console_get_options(uart, &baud, &parity, &bits);
return uart_set_options(&uart->port, co, baud, parity, bits, flow);
+# else
+ return 0;
+# endif
+}
+#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) ||
+ defined (CONFIG_EARLY_PRINTK) */
+
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+static void bfin_serial_console_putchar(struct uart_port *port, int ch)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ while (!(UART_GET_LSR(uart) & THRE))
+ barrier();
+ UART_PUT_CHAR(uart, ch);
+ SSYNC();
+}
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct bfin_serial_port *uart = &bfin_serial_ports[co->index];
+ int flags = 0;
+
+ spin_lock_irqsave(&uart->port.lock, flags);
+ uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
+ spin_unlock_irqrestore(&uart->port.lock, flags);
+
}
-static struct uart_driver bfin_serial_reg;
static struct console bfin_serial_console = {
.name = BFIN_SERIAL_NAME,
.write = bfin_serial_console_write,
@@ -1095,7 +1114,64 @@ console_initcall(bfin_serial_rs_console_init);
#define BFIN_SERIAL_CONSOLE &bfin_serial_console
#else
#define BFIN_SERIAL_CONSOLE NULL
-#endif
+#endif /* CONFIG_SERIAL_BFIN_CONSOLE */
+
+
+#ifdef CONFIG_EARLY_PRINTK
+static __init void early_serial_putc(struct uart_port *port, int ch)
+{
+ unsigned timeout = 0xffff;
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+
+ while ((!(UART_GET_LSR(uart) & THRE)) && --timeout)
+ cpu_relax();
+ UART_PUT_CHAR(uart, ch);
+}
+
+static __init void early_serial_write(struct console *con, const char *s,
+ unsigned int n)
+{
+ struct bfin_serial_port *uart = &bfin_serial_ports[con->index];
+ unsigned int i;
+
+ for (i = 0; i < n; i++, s++) {
+ if (*s == '\n')
+ early_serial_putc(&uart->port, '\r');
+ early_serial_putc(&uart->port, *s);
+ }
+}
+
+static struct __init console bfin_early_serial_console = {
+ .name = "early_BFuart",
+ .write = early_serial_write,
+ .device = uart_console_device,
+ .flags = CON_PRINTBUFFER,
+ .setup = bfin_serial_console_setup,
+ .index = -1,
+ .data = &bfin_serial_reg,
+};
+
+struct console __init *bfin_earlyserial_init(unsigned int port,
+ unsigned int cflag)
+{
+ struct bfin_serial_port *uart;
+ struct ktermios t;
+
+ if (port == -1 || port >= nr_ports)
+ port = 0;
+ bfin_serial_init_ports();
+ bfin_early_serial_console.index = port;
+ uart = &bfin_serial_ports[port];
+ t.c_cflag = cflag;
+ t.c_iflag = 0;
+ t.c_oflag = 0;
+ t.c_lflag = ICANON;
+ t.c_line = port;
+ bfin_serial_set_termios(&uart->port, &t, &t);
+ return &bfin_early_serial_console;
+}
+
+#endif /* CONFIG_SERIAL_BFIN_CONSOLE */
static struct uart_driver bfin_serial_reg = {
.owner = THIS_MODULE,
@@ -1182,7 +1258,7 @@ static int __init bfin_serial_init(void)
int ret;
#ifdef CONFIG_KGDB_UART
struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
- struct termios t;
+ struct ktermios t;
#endif
pr_info("Serial: Blackfin serial driver\n");
@@ -1199,11 +1275,15 @@ static int __init bfin_serial_init(void)
}
#ifdef CONFIG_KGDB_UART
if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) {
- request_irq(uart->port.irq, bfin_serial_int,
+ request_irq(uart->port.irq, bfin_serial_rx_int,
IRQF_DISABLED, "BFIN_UART_RX", uart);
pr_info("Request irq for kgdb uart port\n");
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ERBFI);
+#else
UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
- __builtin_bfin_ssync();
+#endif
+ SSYNC();
t.c_cflag = CS8|B57600;
t.c_iflag = 0;
t.c_oflag = 0;
diff --git a/include/asm-arm/arch-imx/mmc.h b/include/asm-arm/arch-imx/mmc.h
index 84c726934ac..4712f354dcc 100644
--- a/include/asm-arm/arch-imx/mmc.h
+++ b/include/asm-arm/arch-imx/mmc.h
@@ -3,8 +3,11 @@
#include <linux/mmc/host.h>
+struct device;
+
struct imxmmc_platform_data {
- int (*card_present)(void);
+ int (*card_present)(struct device *);
+ int (*get_ro)(struct device *);
};
extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index 0215965dc58..7dbd603c38c 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -6,6 +6,8 @@
#include <linux/types.h>
+#define GPIO_PIN_NONE (-1)
+
/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
void at32_add_system_devices(void);
@@ -36,6 +38,12 @@ struct platform_device *
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
unsigned long fbmem_start, unsigned long fbmem_len);
+struct usba_platform_data {
+ int vbus_pin;
+};
+struct platform_device *
+at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
+
/* depending on what's hooked up, not all SSC pins will be used */
#define ATMEL_SSC_TK 0x01
#define ATMEL_SSC_TF 0x02
diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
index 9930871decd..b1abe6b4e4e 100644
--- a/include/asm-avr32/arch-at32ap/portmux.h
+++ b/include/asm-avr32/arch-at32ap/portmux.h
@@ -19,6 +19,7 @@
#define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */
#define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */
#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */
+#define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */
void at32_select_periph(unsigned int pin, unsigned int periph,
unsigned long flags);
diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h
index 07152b7fd9c..c98eea44a70 100644
--- a/include/asm-avr32/arch-at32ap/smc.h
+++ b/include/asm-avr32/arch-at32ap/smc.h
@@ -15,22 +15,50 @@
/*
* All timing parameters are in nanoseconds.
*/
+struct smc_timing {
+ /* Delay from address valid to assertion of given strobe */
+ int ncs_read_setup;
+ int nrd_setup;
+ int ncs_write_setup;
+ int nwe_setup;
+
+ /* Pulse length of given strobe */
+ int ncs_read_pulse;
+ int nrd_pulse;
+ int ncs_write_pulse;
+ int nwe_pulse;
+
+ /* Total cycle length of given operation */
+ int read_cycle;
+ int write_cycle;
+
+ /* Minimal recovery times, will extend cycle if needed */
+ int ncs_read_recover;
+ int nrd_recover;
+ int ncs_write_recover;
+ int nwe_recover;
+};
+
+/*
+ * All timing parameters are in clock cycles.
+ */
struct smc_config {
+
/* Delay from address valid to assertion of given strobe */
- u16 ncs_read_setup;
- u16 nrd_setup;
- u16 ncs_write_setup;
- u16 nwe_setup;
+ u8 ncs_read_setup;
+ u8 nrd_setup;
+ u8 ncs_write_setup;
+ u8 nwe_setup;
/* Pulse length of given strobe */
- u16 ncs_read_pulse;
- u16 nrd_pulse;
- u16 ncs_write_pulse;
- u16 nwe_pulse;
+ u8 ncs_read_pulse;
+ u8 nrd_pulse;
+ u8 ncs_write_pulse;
+ u8 nwe_pulse;
/* Total cycle length of given operation */
- u16 read_cycle;
- u16 write_cycle;
+ u8 read_cycle;
+ u8 write_cycle;
/* Bus width in bytes */
u8 bus_width;
@@ -76,6 +104,9 @@ struct smc_config {
unsigned int tdf_mode:1;
};
+extern void smc_set_timing(struct smc_config *config,
+ const struct smc_timing *timing);
+
extern int smc_set_configuration(int cs, const struct smc_config *config);
extern struct smc_config *smc_get_configuration(int cs);
diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
index 21bb60bbb9a..81e342636ac 100644
--- a/include/asm-avr32/dma-mapping.h
+++ b/include/asm-avr32/dma-mapping.h
@@ -264,7 +264,11 @@ static inline void
dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
- dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
+ /*
+ * No need to do anything since the CPU isn't supposed to
+ * touch this memory after we flushed it at mapping- or
+ * sync-for-device time.
+ */
}
static inline void
@@ -309,12 +313,11 @@ static inline void
dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction direction)
{
- int i;
-
- for (i = 0; i < nents; i++) {
- dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
- sg[i].length, direction);
- }
+ /*
+ * No need to do anything since the CPU isn't supposed to
+ * touch this memory after we flushed it at mapping- or
+ * sync-for-device time.
+ */
}
static inline void
diff --git a/include/asm-avr32/system.h b/include/asm-avr32/system.h
index a8236bacc87..dc2d527cef4 100644
--- a/include/asm-avr32/system.h
+++ b/include/asm-avr32/system.h
@@ -73,11 +73,16 @@ extern struct task_struct *__switch_to(struct task_struct *,
extern void __xchg_called_with_bad_pointer(void);
-#ifdef __CHECKER__
-extern unsigned long __builtin_xchg(void *ptr, unsigned long x);
-#endif
+static inline unsigned long xchg_u32(u32 val, volatile u32 *m)
+{
+ u32 ret;
-#define xchg_u32(val, m) __builtin_xchg((void *)m, val)
+ asm volatile("xchg %[ret], %[m], %[val]"
+ : [ret] "=&r"(ret), "=m"(*m)
+ : "m"(*m), [m] "r"(m), [val] "r"(val)
+ : "memory");
+ return ret;
+}
static inline unsigned long __xchg(unsigned long x,
volatile void *ptr,
diff --git a/include/asm-avr32/unistd.h b/include/asm-avr32/unistd.h
index 3b4e35b55c8..de09009593f 100644
--- a/include/asm-avr32/unistd.h
+++ b/include/asm-avr32/unistd.h
@@ -303,6 +303,19 @@
#ifdef __KERNEL__
#define NR_syscalls 282
+/* Old stuff */
+#define __IGNORE_uselib
+#define __IGNORE_mmap
+
+/* NUMA stuff */
+#define __IGNORE_mbind
+#define __IGNORE_get_mempolicy
+#define __IGNORE_set_mempolicy
+#define __IGNORE_migrate_pages
+#define __IGNORE_move_pages
+
+/* SMP stuff */
+#define __IGNORE_getcpu
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_STAT64
diff --git a/include/asm-blackfin/bfin5xx_spi.h b/include/asm-blackfin/bfin5xx_spi.h
index 95c1c952e7c..f617d876545 100644
--- a/include/asm-blackfin/bfin5xx_spi.h
+++ b/include/asm-blackfin/bfin5xx_spi.h
@@ -21,8 +21,6 @@
#ifndef _SPI_CHANNEL_H_
#define _SPI_CHANNEL_H_
-#define SPI0_REGBASE 0xffc00500
-
#define SPI_READ 0
#define SPI_WRITE 1
diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h
index 25b934b7f82..984b74f0a2e 100644
--- a/include/asm-blackfin/blackfin.h
+++ b/include/asm-blackfin/blackfin.h
@@ -11,78 +11,57 @@
#define HI(con32) (((con32) >> 16) & 0xFFFF)
#define hi(con32) (((con32) >> 16) & 0xFFFF)
-#include <asm/mach/blackfin.h>
-#include <asm/bfin-global.h>
+#include <asm/mach/anomaly.h>
#ifndef __ASSEMBLY__
/* SSYNC implementation for C file */
-#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
-static inline void SSYNC (void)
-{
- int _tmp;
- __asm__ __volatile__ ("cli %0;\n\t"
- "nop;nop;\n\t"
- "ssync;\n\t"
- "sti %0;\n\t"
- :"=d"(_tmp):);
-}
-#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-static inline void SSYNC (void)
+static inline void SSYNC(void)
{
int _tmp;
- __asm__ __volatile__ ("cli %0;\n\t"
- "ssync;\n\t"
- "sti %0;\n\t"
- :"=d"(_tmp):);
+ if (ANOMALY_05000312)
+ __asm__ __volatile__(
+ "cli %0;"
+ "nop;"
+ "nop;"
+ "ssync;"
+ "sti %0;"
+ : "=d" (_tmp)
+ );
+ else if (ANOMALY_05000244)
+ __asm__ __volatile__(
+ "nop;"
+ "nop;"
+ "nop;"
+ "ssync;"
+ );
+ else
+ __asm__ __volatile__("ssync;");
}
-#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
-static inline void SSYNC (void)
-{
- __asm__ __volatile__ ("nop; nop; nop;\n\t"
- "ssync;\n\t"
- ::);
-}
-#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-static inline void SSYNC (void)
-{
- __asm__ __volatile__ ("ssync;\n\t");
-}
-#endif
/* CSYNC implementation for C file */
-#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
-static inline void CSYNC (void)
-{
- int _tmp;
- __asm__ __volatile__ ("cli %0;\n\t"
- "nop;nop;\n\t"
- "csync;\n\t"
- "sti %0;\n\t"
- :"=d"(_tmp):);
-}
-#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-static inline void CSYNC (void)
+static inline void CSYNC(void)
{
int _tmp;
- __asm__ __volatile__ ("cli %0;\n\t"
- "csync;\n\t"
- "sti %0;\n\t"
- :"=d"(_tmp):);
-}
-#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
-static inline void CSYNC (void)
-{
- __asm__ __volatile__ ("nop; nop; nop;\n\t"
- "ssync;\n\t"
- ::);
+ if (ANOMALY_05000312)
+ __asm__ __volatile__(
+ "cli %0;"
+ "nop;"
+ "nop;"
+ "csync;"
+ "sti %0;"
+ : "=d" (_tmp)
+ );
+ else if (ANOMALY_05000244)
+ __asm__ __volatile__(
+ "nop;"
+ "nop;"
+ "nop;"
+ "csync;"
+ );
+ else
+ __asm__ __volatile__("csync;");
}
-#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-static inline void CSYNC (void)
-{
- __asm__ __volatile__ ("csync;\n\t");
-}
-#endif
#else /* __ASSEMBLY__ */
@@ -91,19 +70,15 @@ static inline void CSYNC (void)
#define ssync(x) SSYNC(x)
#define csync(x) CSYNC(x)
-#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
+#if ANOMALY_05000312
#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
-#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
-#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
-
-#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
+#elif ANOMALY_05000244
#define SSYNC(scratch) nop; nop; nop; SSYNC;
#define CSYNC(scratch) nop; nop; nop; CSYNC;
-#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
+#else
#define SSYNC(scratch) SSYNC;
#define CSYNC(scratch) CSYNC;
@@ -111,4 +86,7 @@ static inline void CSYNC (void)
#endif /* __ASSEMBLY__ */
+#include <asm/mach/blackfin.h>
+#include <asm/bfin-global.h>
+
#endif /* _BLACKFIN_H_ */
diff --git a/include/asm-blackfin/cacheflush.h b/include/asm-blackfin/cacheflush.h
index e5e000de3c3..d81a77545a0 100644
--- a/include/asm-blackfin/cacheflush.h
+++ b/include/asm-blackfin/cacheflush.h
@@ -48,9 +48,9 @@ extern void blackfin_dflush_page(void *);
static inline void flush_icache_range(unsigned start, unsigned end)
{
-#if defined(CONFIG_BLKFIN_DCACHE) && defined(CONFIG_BLKFIN_CACHE)
+#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_ICACHE)
-# if defined(CONFIG_BLKFIN_WT)
+# if defined(CONFIG_BFIN_WT)
blackfin_icache_flush_range((start), (end));
# else
blackfin_icache_dcache_flush_range((start), (end));
@@ -58,10 +58,10 @@ static inline void flush_icache_range(unsigned start, unsigned end)
#else
-# if defined(CONFIG_BLKFIN_CACHE)
+# if defined(CONFIG_BFIN_ICACHE)
blackfin_icache_flush_range((start), (end));
# endif
-# if defined(CONFIG_BLKFIN_DCACHE)
+# if defined(CONFIG_BFIN_DCACHE)
blackfin_dcache_flush_range((start), (end));
# endif
@@ -74,12 +74,12 @@ do { memcpy(dst, src, len); \
} while (0)
#define copy_from_user_page(vma, page, vaddr, dst, src, len) memcpy(dst, src, len)
-#if defined(CONFIG_BLKFIN_DCACHE)
+#if defined(CONFIG_BFIN_DCACHE)
# define invalidate_dcache_range(start,end) blackfin_dcache_invalidate_range((start), (end))
#else
# define invalidate_dcache_range(start,end) do { } while (0)
#endif
-#if defined(CONFIG_BLKFIN_DCACHE) && defined(CONFIG_BLKFIN_WB)
+#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_WB)
# define flush_dcache_range(start,end) blackfin_dcache_flush_range((start), (end))
# define flush_dcache_page(page) blackfin_dflush_page(page_address(page))
#else
@@ -87,4 +87,4 @@ do { memcpy(dst, src, len); \
# define flush_dcache_page(page) do { } while (0)
#endif
-#endif /* _BLACKFIN_CACHEFLUSH_H */
+#endif /* _BLACKFIN_ICACHEFLUSH_H */
diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h
index e0dd56bfa4c..06828d77a58 100644
--- a/include/asm-blackfin/cplb.h
+++ b/include/asm-blackfin/cplb.h
@@ -1,17 +1,100 @@
-/************************************************************************
+/*
+ * File: include/asm-blackfin/cplb.h
+ * Based on: include/asm-blackfin/mach-bf537/bf537.h
+ * Author: Robin Getz <rgetz@blackfin.uclinux.org>
*
- * cplb.h
+ * Created: 2000
+ * Description: Common CPLB definitions for CPLB init
*
- * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved.
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
*
- ************************************************************************/
-
-/* Defines necessary for cplb initialisation routines. */
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
#ifndef _CPLB_H
#define _CPLB_H
-# include <asm/blackfin.h>
+#include <asm/blackfin.h>
+#include <asm/mach/anomaly.h>
+
+#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
+#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK)
+#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
+#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID)
+
+/*Use the menuconfig cache policy here - CONFIG_BFIN_WT/CONFIG_BFIN_WB*/
+
+#if ANOMALY_05000158
+#define ANOMALY_05000158_WORKAROUND 0x200
+#else
+#define ANOMALY_05000158_WORKAROUND 0x0
+#endif
+
+#define CPLB_COMMON (CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
+
+#ifdef CONFIG_BFIN_WB /*Write Back Policy */
+#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_COMMON)
+#else /*Write Through */
+#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON)
+#endif
+
+#define L1_DMEMORY (CPLB_LOCK | CPLB_COMMON)
+#define L2_MEMORY (CPLB_COMMON)
+#define SDRAM_DNON_CHBL (CPLB_COMMON)
+#define SDRAM_EBIU (CPLB_COMMON)
+#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
+
+#define SIZE_1K 0x00000400 /* 1K */
+#define SIZE_4K 0x00001000 /* 4K */
+#define SIZE_1M 0x00100000 /* 1M */
+#define SIZE_4M 0x00400000 /* 4M */
+
+#define MAX_CPLBS (16 * 2)
+
+#define ASYNC_MEMORY_CPLB_COVERAGE ((ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
+ ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) / SIZE_4M)
+
+/*
+* Number of required data CPLB switchtable entries
+* MEMSIZE / 4 (we mostly install 4M page size CPLBs
+* approx 16 for smaller 1MB page size CPLBs for allignment purposes
+* 1 for L1 Data Memory
+* possibly 1 for L2 Data Memory
+* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
+* 1 for ASYNC Memory
+*/
+
+
+#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1 \
+ + ASYNC_MEMORY_CPLB_COVERAGE) * 2)
+
+/*
+* Number of required instruction CPLB switchtable entries
+* MEMSIZE / 4 (we mostly install 4M page size CPLBs
+* approx 12 for smaller 1MB page size CPLBs for allignment purposes
+* 1 for L1 Instruction Memory
+* possibly 1 for L2 Instruction Memory
+* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
+*/
+
+#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1 + 1) * 2)
+
#define CPLB_ENABLE_ICACHE_P 0
#define CPLB_ENABLE_DCACHE_P 1
@@ -39,8 +122,6 @@
#define CPLB_DEF_CACHE CPLB_L1_CHBL | CPLB_WT
#define CPLB_CACHE_ENABLED CPLB_L1_CHBL | CPLB_DIRTY
-#define CPLB_ALL_ACCESS CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR
-
#define CPLB_I_PAGE_MGMT CPLB_LOCK | CPLB_VALID
#define CPLB_D_PAGE_MGMT CPLB_LOCK | CPLB_ALL_ACCESS | CPLB_VALID
#define CPLB_DNOCACHE CPLB_ALL_ACCESS | CPLB_VALID
diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h
index be0d913e551..b42a531e7a1 100644
--- a/include/asm-blackfin/dma.h
+++ b/include/asm-blackfin/dma.h
@@ -152,6 +152,7 @@ struct dma_channel {
/* functions to set register mode */
void set_dma_start_addr(unsigned int channel, unsigned long addr);
void set_dma_next_desc_addr(unsigned int channel, unsigned long addr);
+void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr);
void set_dma_x_count(unsigned int channel, unsigned short x_count);
void set_dma_x_modify(unsigned int channel, short x_modify);
void set_dma_y_count(unsigned int channel, unsigned short y_count);
@@ -159,6 +160,7 @@ void set_dma_y_modify(unsigned int channel, short y_modify);
void set_dma_config(unsigned int channel, unsigned short config);
unsigned short set_bfin_dma_config(char direction, char flow_mode,
char intr_mode, char dma_mode, char width);
+void set_dma_curr_addr(unsigned int channel, unsigned long addr);
/* get curr status for polling */
unsigned short get_dma_curr_irqstat(unsigned int channel);
diff --git a/include/asm-blackfin/early_printk.h b/include/asm-blackfin/early_printk.h
new file mode 100644
index 00000000000..110f1c1f845
--- /dev/null
+++ b/include/asm-blackfin/early_printk.h
@@ -0,0 +1,28 @@
+/*
+ * File: include/asm-blackfin/early_printk.h
+ * Author: Robin Getz <rgetz@blackfin.uclinux.org
+ *
+ * Created: 14Aug2007
+ * Description: function prototpyes for early printk
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifdef CONFIG_EARLY_PRINTK
+extern int setup_early_printk(char *);
+#else
+#define setup_early_printk(fmt) do { } while (0)
+#endif /* CONFIG_EARLY_PRINTK */
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
index 7480cfa7e2d..dd203cd9379 100644
--- a/include/asm-blackfin/gpio.h
+++ b/include/asm-blackfin/gpio.h
@@ -144,6 +144,24 @@
#ifdef BF533_FAMILY
#define MAX_BLACKFIN_GPIOS 16
+
+#define GPIO_PF0 0
+#define GPIO_PF1 1
+#define GPIO_PF2 2
+#define GPIO_PF3 3
+#define GPIO_PF4 4
+#define GPIO_PF5 5
+#define GPIO_PF6 6
+#define GPIO_PF7 7
+#define GPIO_PF8 8
+#define GPIO_PF9 9
+#define GPIO_PF10 10
+#define GPIO_PF11 11
+#define GPIO_PF12 12
+#define GPIO_PF13 13
+#define GPIO_PF14 14
+#define GPIO_PF15 15
+
#endif
#ifdef BF537_FAMILY
@@ -421,6 +439,19 @@ unsigned short gpio_get_value(unsigned short gpio);
void gpio_direction_input(unsigned short gpio);
void gpio_direction_output(unsigned short gpio);
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+#include <asm/irq.h>
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return (gpio + GPIO_IRQ_BASE);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return (irq - GPIO_IRQ_BASE);
+}
+
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BLACKFIN_GPIO_H__ */
diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h
index 142cb333db2..525179bf43d 100644
--- a/include/asm-blackfin/io.h
+++ b/include/asm-blackfin/io.h
@@ -115,21 +115,21 @@ static inline unsigned int readl(const volatile void __iomem *addr)
#ifndef __ASSEMBLY__
-extern void outsb(void __iomem *port, const void *addr, unsigned short count);
-extern void outsw(void __iomem *port, const void *addr, unsigned short count);
-extern void outsl(void __iomem *port, const void *addr, unsigned short count);
+extern void outsb(unsigned long port, const void *addr, unsigned long count);
+extern void outsw(unsigned long port, const void *addr, unsigned long count);
+extern void outsl(unsigned long port, const void *addr, unsigned long count);
-extern void insb(const void __iomem *port, void *addr, unsigned short count);
-extern void insw(const void __iomem *port, void *addr, unsigned short count);
-extern void insl(const void __iomem *port, void *addr, unsigned short count);
+extern void insb(unsigned long port, void *addr, unsigned long count);
+extern void insw(unsigned long port, void *addr, unsigned long count);
+extern void insl(unsigned long port, void *addr, unsigned long count);
-extern void dma_outsb(void __iomem *port, const void *addr, unsigned short count);
-extern void dma_outsw(void __iomem *port, const void *addr, unsigned short count);
-extern void dma_outsl(void __iomem *port, const void *addr, unsigned short count);
+extern void dma_outsb(unsigned long port, const void *addr, unsigned short count);
+extern void dma_outsw(unsigned long port, const void *addr, unsigned short count);
+extern void dma_outsl(unsigned long port, const void *addr, unsigned short count);
-extern void dma_insb(const void __iomem *port, void *addr, unsigned short count);
-extern void dma_insw(const void __iomem *port, void *addr, unsigned short count);
-extern void dma_insl(const void __iomem *port, void *addr, unsigned short count);
+extern void dma_insb(unsigned long port, void *addr, unsigned short count);
+extern void dma_insw(unsigned long port, void *addr, unsigned short count);
+extern void dma_insl(unsigned long port, void *addr, unsigned short count);
/*
* Map some physical address range into the kernel address space.
diff --git a/include/asm-blackfin/ioctls.h b/include/asm-blackfin/ioctls.h
index 8356204151d..895e3173165 100644
--- a/include/asm-blackfin/ioctls.h
+++ b/include/asm-blackfin/ioctls.h
@@ -47,8 +47,13 @@
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TCGETS2 _IOR('T', 0x2A, struct termios2)
+#define TCSETS2 _IOW('T', 0x2B, struct termios2)
+#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
+#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
+/* Get Pty Number (of pty-mux device) */
+#define TIOCGPTN _IOR('T', 0x30, unsigned int)
+#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
diff --git a/include/asm-blackfin/irq_handler.h b/include/asm-blackfin/irq_handler.h
index d830f0a49a1..139b5208f9d 100644
--- a/include/asm-blackfin/irq_handler.h
+++ b/include/asm-blackfin/irq_handler.h
@@ -1,13 +1,15 @@
#ifndef _IRQ_HANDLER_H
#define _IRQ_HANDLER_H
+#include <linux/types.h>
+#include <linux/linkage.h>
+
/* BASE LEVEL interrupt handler routines */
-asmlinkage void evt_emulation(void);
asmlinkage void evt_exception(void);
asmlinkage void trap(void);
asmlinkage void evt_ivhw(void);
asmlinkage void evt_timer(void);
-asmlinkage void evt_evt2(void);
+asmlinkage void evt_nmi(void);
asmlinkage void evt_evt7(void);
asmlinkage void evt_evt8(void);
asmlinkage void evt_evt9(void);
@@ -18,5 +20,14 @@ asmlinkage void evt_evt13(void);
asmlinkage void evt_soft_int1(void);
asmlinkage void evt_system_call(void);
asmlinkage void init_exception_buff(void);
+asmlinkage void trap_c(struct pt_regs *fp);
+asmlinkage void ex_replaceable(void);
+asmlinkage void early_trap(void);
+
+extern void *ex_table[];
+extern void return_from_exception(void);
+
+extern int bfin_request_exception(unsigned int exception, void (*handler)(void));
+extern int bfin_free_exception(unsigned int exception, void (*handler)(void));
#endif
diff --git a/include/asm-blackfin/kgdb.h b/include/asm-blackfin/kgdb.h
index 532bd905200..0f73847fd6b 100644
--- a/include/asm-blackfin/kgdb.h
+++ b/include/asm-blackfin/kgdb.h
@@ -179,5 +179,6 @@ enum regnames {
#define STATDA1 0x80
extern void kgdb_print(const char *fmt, ...);
+extern void init_kgdb_uart(void);
#endif
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
new file mode 100644
index 00000000000..991db986cd4
--- /dev/null
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -0,0 +1,41 @@
+/*
+ * File: include/asm-blackfin/mach-bf527/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* This file shoule be up to date with:
+ * - Revision A, May 30, 2007; ADSP-BF527 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* Incorrect Access of OTP_STATUS During otp_write() Function */
+#define ANOMALY_05000328 (1)
+/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
+#define ANOMALY_05000337 (1)
+/* TWI Does Not Operate Correctly Under Certain Signal Termination Conditions */
+#define ANOMALY_05000342 (1)
+/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
+#define ANOMALY_05000347 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000323 (0)
+#endif
diff --git a/include/asm-blackfin/mach-bf527/defBF52x_base.h b/include/asm-blackfin/mach-bf527/defBF52x_base.h
index 0b2fb5036ed..b1ff67db01f 100644
--- a/include/asm-blackfin/mach-bf527/defBF52x_base.h
+++ b/include/asm-blackfin/mach-bf527/defBF52x_base.h
@@ -102,6 +102,7 @@
/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI0_REGBASE 0xFFC00500
#define SPI_CTL 0xFFC00500 /* SPI Control Register */
#define SPI_FLG 0xFFC00504 /* SPI Flag register */
#define SPI_STAT 0xFFC00508 /* SPI Status register */
@@ -480,6 +481,7 @@
/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
+#define TWI0_REGBASE 0xFFC01400
#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */
#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */
#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 7302f290b93..f36ff5af1b9 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -1,247 +1,259 @@
/*
- * File: include/asm-blackfin/mach-bf533/anomaly.h
- * Based on:
- * Author:
+ * File: include/asm-blackfin/mach-bf533/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - Revision U, May 17, 2006; ADSP-BF533 Blackfin Processor Anomaly List
- * - Revision Y, May 17, 2006; ADSP-BF532 Blackfin Processor Anomaly List
- * - Revision T, May 17, 2006; ADSP-BF531 Blackfin Processor Anomaly List
+ * - Revision X, March 23, 2007; ADSP-BF533 Blackfin Processor Anomaly List
+ * - Revision AB, March 23, 2007; ADSP-BF532 Blackfin Processor Anomaly List
+ * - Revision W, March 23, 2007; ADSP-BF531 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
/* We do not support 0.1 or 0.2 silicon - sorry */
-#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2))
-#error Kernel will not work on BF533 Version 0.1 or 0.2
+#if __SILICON_REVISION__ < 3
+# error Kernel will not work on BF533 silicon version 0.0, 0.1, or 0.2
#endif
-/* Issues that are common to 0.5, 0.4, and 0.3 silicon */
-#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) \
- || defined(CONFIG_BF_REV_0_3))
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
- slot1 and store of a P register in slot 2 is not
- supported */
-#define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on
- every corresponding match */
-#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
- Channel DMA stops */
-#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
- registers. */
-#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
- upper bits*/
-#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
-#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
- syncs */
-#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
- functional */
-#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
- state */
-#define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
- VDDint <=0.9V */
-#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
-#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
- an edge is detected may clear interrupt */
-#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
- DMA system instability */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
- not restored */
-#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
- control */
-#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
- killed in a particular stage*/
-#define ANOMALY_05000311 /* Erroneous flag pin operations under specific
- sequences */
-#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
- registers are interrupted */
-#define ANOMALY_05000313 /* PPI Is Level-Sensitive on First Transfer */
-#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously On
- * Next System MMR Access */
-#define ANOMALY_05000319 /* Internal Voltage Regulator Values of 1.05V, 1.10V
- * and 1.15V Not Allowed for LQFP Packages */
-#endif /* Issues that are common to 0.5, 0.4, and 0.3 silicon */
+#if defined(__ADSPBF531__)
+# define ANOMALY_BF531 1
+#else
+# define ANOMALY_BF531 0
+#endif
+#if defined(__ADSPBF532__)
+# define ANOMALY_BF532 1
+#else
+# define ANOMALY_BF532 0
+#endif
+#if defined(__ADSPBF533__)
+# define ANOMALY_BF533 1
+#else
+# define ANOMALY_BF533 0
+#endif
-/* These issues only occur on 0.3 or 0.4 BF533 */
-#if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3))
-#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
- updated at the same time. */
-#define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data
- Cache Fill can be corrupted after or during
- Instruction DMA if certain core stalls exist */
-#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
- Purpose TX or RX modes */
-#define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by
- preceding memory read */
-#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
- inactive channels in certain conditions */
-#define ANOMALY_05000202 /* Possible infinite stall with specific dual dag
- situation */
-#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
-#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
-#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
- data*/
-#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
- Differences in certain Conditions */
-#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
-#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
- hardware reset */
-#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
- IDLE around a Change of Control causes
- unpredictable results */
-#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
- shadow of a conditional branch */
-#define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware
- errors */
-#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
-#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
- interrupt not functional */
-#define ANOMALY_05000257 /* An interrupt or exception during short Hardware
- loops may cause the instruction fetch unit to
- malfunction */
-#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
- the ICPLB Data registers differ */
-#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
-#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
-#define ANOMALY_05000262 /* Stores to data cache may be lost */
-#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
-#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
- instruction will cause an infinite stall in the
- second to last instruction in a hardware loop */
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
- SPORT external receive and transmit clocks. */
-#define ANOMALY_05000269 /* High I/O activity causes the output voltage of the
- internal voltage regulator (VDDint) to increase. */
-#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
- internal voltage regulator (VDDint) to decrease */
-#endif /* issues only occur on 0.3 or 0.4 BF533 */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
+#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
+/* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */
+#define ANOMALY_05000105 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */
+#define ANOMALY_05000158 (__SILICON_REVISION__ < 5)
+/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+#define ANOMALY_05000166 (1)
+/* Turning Serial Ports on with External Frame Syncs */
+#define ANOMALY_05000167 (1)
+/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
+#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
+#define ANOMALY_05000183 (__SILICON_REVISION__ < 4)
+/* False Protection Exceptions */
+#define ANOMALY_05000189 (__SILICON_REVISION__ < 4)
+/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
+#define ANOMALY_05000193 (__SILICON_REVISION__ < 4)
+/* Restarting SPORT in Specific Modes May Cause Data Corruption */
+#define ANOMALY_05000194 (__SILICON_REVISION__ < 4)
+/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
+/* Current DMA Address Shows Wrong Value During Carry Fix */
+#define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
+/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
+#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
+/* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */
+#define ANOMALY_05000201 (__SILICON_REVISION__ < 4)
+/* Possible Infinite Stall with Specific Dual-DAG Situation */
+#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
+/* Specific Sequence That Can Cause DMA Error or DMA Stopping */
+#define ANOMALY_05000203 (__SILICON_REVISION__ < 4)
+/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533)
+/* Recovery from "Brown-Out" Condition */
+#define ANOMALY_05000207 (__SILICON_REVISION__ < 4)
+/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */
+#define ANOMALY_05000208 (1)
+/* Speed Path in Computational Unit Affects Certain Instructions */
+#define ANOMALY_05000209 (__SILICON_REVISION__ < 4)
+/* UART TX Interrupt Masked Erroneously */
+#define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
+/* NMI Event at Boot Time Results in Unpredictable State */
+#define ANOMALY_05000219 (1)
+/* Incorrect Pulse-Width of UART Start Bit */
+#define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
+/* Scratchpad Memory Bank Reads May Return Incorrect Data */
+#define ANOMALY_05000227 (__SILICON_REVISION__ < 5)
+/* SPI Slave Boot Mode Modifies Registers from Reset Value */
+#define ANOMALY_05000229 (1)
+/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */
+#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
+/* UART STB Bit Incorrectly Affects Receiver Setting */
+#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
+/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
+#define ANOMALY_05000233 (__SILICON_REVISION__ < 4)
+/* Incorrect Revision Number in DSPID Register */
+#define ANOMALY_05000234 (__SILICON_REVISION__ == 4)
+/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 4)
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Data CPLBs Should Prevent Spurious Hardware Errors */
+#define ANOMALY_05000246 (__SILICON_REVISION__ < 5)
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ == 4)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 5)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 4)
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
+#define ANOMALY_05000255 (__SILICON_REVISION__ < 5)
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 5)
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
+#define ANOMALY_05000258 (__SILICON_REVISION__ < 5)
+/* ICPLB_STATUS MMR Register May Be Corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ < 5)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 5)
+/* Stores To Data Cache May Be Lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 5)
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ < 5)
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
+#define ANOMALY_05000269 (__SILICON_REVISION__ < 5)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (__SILICON_REVISION__ < 5)
+/* Spontaneous Reset of Internal Voltage Regulator */
+#define ANOMALY_05000271 (__SILICON_REVISION__ < 4)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* Writes to Synchronous SDRAM Memory May Be Lost */
+#define ANOMALY_05000273 (1)
+/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
+#define ANOMALY_05000276 (1)
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
+#define ANOMALY_05000277 (1)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (1)
+/* False Hardware Error Exception When ISR Context Is Not Restored */
+#define ANOMALY_05000281 (1)
+/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
+#define ANOMALY_05000282 (1)
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+#define ANOMALY_05000283 (1)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (1)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
+/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
+#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
+#define ANOMALY_05000311 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI Is Level-Sensitive on First Transfer */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+#define ANOMALY_05000315 (1)
+/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
+#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
-/* These issues are only on 0.4 silicon */
-#if (defined(CONFIG_BF_REV_0_4))
-#define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
- (TDM) */
-#endif /* issues are only on 0.4 silicon */
+/* These anomalies have been "phased" out of analog.com anomaly sheets and are
+ * here to show running on older silicon just isn't feasible.
+ */
-/* These issues are only on 0.3 silicon */
-#if defined(CONFIG_BF_REV_0_3)
-#define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with
- External Frame Syncs */
-#define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative
- Instruction or Data Fetches, or by Fetches at the
- boundary of reserved memory space */
-#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
- when polarity setting is changed */
-#define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data
- corruption */
-#define ANOMALY_05000199 /* DMA current address shows wrong value during carry
- fix */
-#define ANOMALY_05000201 /* Receive frame sync not ignored during active
- frames in sport MCM */
-#define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA
- stopping */
-#if defined(CONFIG_BF533)
-#define ANOMALY_05000204 /* Incorrect data read with write-through cache and
- allocate cache lines on reads only mode */
-#endif /* CONFIG_BF533 */
-#define ANOMALY_05000207 /* Recovery from "brown-out" condition */
-#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
- instructions */
-#define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame
- Sync Transmit Mode */
-#define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */
-#endif /* only on 0.3 silicon */
+/* Watchpoints (Hardware Breakpoints) are not supported */
+#define ANOMALY_05000067 (__SILICON_REVISION__ < 3)
+/* Reserved bits in SYSCFG register not set at power on */
+#define ANOMALY_05000109 (__SILICON_REVISION__ < 3)
+/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
+#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */
+#define ANOMALY_05000123 (__SILICON_REVISION__ < 3)
+/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
+#define ANOMALY_05000124 (__SILICON_REVISION__ < 3)
+/* Erroneous exception when enabling cache */
+#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
+/* SPI clock polarity and phase bits incorrect during booting */
+#define ANOMALY_05000126 (__SILICON_REVISION__ < 3)
+/* DMEM_CONTROL is not set on Reset */
+#define ANOMALY_05000137 (__SILICON_REVISION__ < 3)
+/* SPI boot will not complete if there is a zero fill block in the loader file */
+#define ANOMALY_05000138 (__SILICON_REVISION__ < 3)
+/* Allowing the SPORT RX FIFO to fill will cause an overflow */
+#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
+/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
+#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
+/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
+#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
+/* A read from external memory may return a wrong value with data cache enabled */
+#define ANOMALY_05000143 (__SILICON_REVISION__ < 3)
+/* DMA and TESTSET conflict when both are accessing external memory */
+#define ANOMALY_05000144 (__SILICON_REVISION__ < 3)
+/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */
+#define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
+/* MDMA may lose the first few words of a descriptor chain */
+#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
+/* The source MDMA descriptor may stop with a DMA Error */
+#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
+/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */
+#define ANOMALY_05000148 (__SILICON_REVISION__ < 3)
+/* Frame Delay in SPORT Multichannel Mode */
+#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
+/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */
+#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
+/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */
+#define ANOMALY_05000155 (__SILICON_REVISION__ < 3)
+/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
+/* SPORT transmit data is not gated by external frame sync in certain conditions */
+#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
+/* SDRAM auto-refresh and subsequent Power Ups */
+#define ANOMALY_05000168 (__SILICON_REVISION__ < 3)
+/* DATA CPLB page miss can result in lost write-through cache data writes */
+#define ANOMALY_05000169 (__SILICON_REVISION__ < 3)
+/* DMA vs Core accesses to external memory */
+#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
+/* Cache Fill Buffer Data lost */
+#define ANOMALY_05000174 (__SILICON_REVISION__ < 3)
+/* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000175 (__SILICON_REVISION__ < 3)
+/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+#define ANOMALY_05000176 (__SILICON_REVISION__ < 3)
+/* Disabling the PPI resets the PPI configuration registers */
+#define ANOMALY_05000181 (__SILICON_REVISION__ < 3)
+/* PPI TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000185 (__SILICON_REVISION__ < 3)
+/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
+#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
+/* In PPI Transmit Modes with External Frame Syncs POLC */
+#define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
+/* Internal Voltage Regulator may not start up */
+#define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
-#if defined(CONFIG_BF_REV_0_2)
-#define ANOMALY_05000067 /* Watchpoints (Hardware Breakpoints) are not
- * supported */
-#define ANOMALY_05000109 /* Reserved bits in SYSCFG register not set at
- * power on */
-#define ANOMALY_05000116 /* Trace Buffers may record discontinuities into
- * emulation mode and/or exception, NMI, reset
- * handlers */
-#define ANOMALY_05000123 /* DTEST_COMMAND initiated memory access may be
- * incorrect if data cache or DMA is active */
-#define ANOMALY_05000124 /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1,
- * or 1:1 */
-#define ANOMALY_05000125 /* Erroneous exception when enabling cache */
-#define ANOMALY_05000126 /* SPI clock polarity and phase bits incorrect
- * during booting */
-#define ANOMALY_05000137 /* DMEM_CONTROL is not set on Reset */
-#define ANOMALY_05000138 /* SPI boot will not complete if there is a zero fill
- * block in the loader file */
-#define ANOMALY_05000140 /* Allowing the SPORT RX FIFO to fill will cause an
- * overflow */
-#define ANOMALY_05000141 /* An Infinite Stall occurs with a particular sequence
- * of consecutive dual dag events */
-#define ANOMALY_05000142 /* Interrupts may be lost when a programmable input
- * flag is configured to be edge sensitive */
-#define ANOMALY_05000143 /* A read from external memory may return a wrong
- * value with data cache enabled */
-#define ANOMALY_05000144 /* DMA and TESTSET conflict when both are accessing
- * external memory */
-#define ANOMALY_05000145 /* In PWM_OUT mode, you must enable the PPI block to
- * generate a waveform from PPI_CLK */
-#define ANOMALY_05000146 /* MDMA may lose the first few words of a descriptor
- * chain */
-#define ANOMALY_05000147 /* The source MDMA descriptor may stop with a DMA
- * Error */
-#define ANOMALY_05000148 /* When booting from a 16-bit asynchronous memory
- * device, the upper 8-bits of each word must be
- * 0x00 */
-#define ANOMALY_05000153 /* Frame Delay in SPORT Multichannel Mode */
-#define ANOMALY_05000154 /* SPORT TFS signal is active in Multi-channel mode
- * outside of valid channels */
-#define ANOMALY_05000155 /* Timer1 can not be used for PWMOUT mode when a
- * certain PPI mode is in use */
-#define ANOMALY_05000157 /* A killed 32-bit System MMR write will lead to
- * the next system MMR access thinking it should be
- * 32-bit. */
-#define ANOMALY_05000163 /* SPORT transmit data is not gated by external frame
- * sync in certain conditions */
-#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */
-#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost
- * write-through cache data writes */
-#define ANOMALY_05000173 /* DMA vs Core accesses to external memory */
-#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */
-#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */
-#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an
- * accumulator saturation */
-#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration
- * registers */
-#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */
-#define ANOMALY_05000191 /* PPI does not invert the Driving PPICLK edge in
- * Transmit Modes */
-#define ANOMALY_05000192 /* In PPI Transmit Modes with External Frame Syncs
- * POLC */
-#define ANOMALY_05000206 /* Internal Voltage Regulator may not start up */
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000323 (0)
#endif
-
-#endif /* _MACH_ANOMALY_H_ */
diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/include/asm-blackfin/mach-bf533/bf533.h
index 185fc128485..12a41693199 100644
--- a/include/asm-blackfin/mach-bf533/bf533.h
+++ b/include/asm-blackfin/mach-bf533/bf533.h
@@ -52,12 +52,12 @@
/***************************/
-#define BLKFIN_DSUBBANKS 4
-#define BLKFIN_DWAYS 2
-#define BLKFIN_DLINES 64
-#define BLKFIN_ISUBBANKS 4
-#define BLKFIN_IWAYS 4
-#define BLKFIN_ILINES 32
+#define BFIN_DSUBBANKS 4
+#define BFIN_DWAYS 2
+#define BFIN_DLINES 64
+#define BFIN_ISUBBANKS 4
+#define BFIN_IWAYS 4
+#define BFIN_ILINES 32
#define WAY0_L 0x1
#define WAY1_L 0x2
@@ -141,97 +141,6 @@
#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO)
-#define MAX_VC 650000000
-#define MIN_VC 50000000
-
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-/********************************PLL Settings **************************************/
-#if (CONFIG_VCO_MULT < 0)
-#error "VCO Multiplier is less than 0. Please select a different value"
-#endif
-
-#if (CONFIG_VCO_MULT == 0)
-#error "VCO Multiplier should be greater than 0. Please select a different value"
-#endif
-
-#if (CONFIG_VCO_MULT > 64)
-#error "VCO Multiplier is more than 64. Please select a different value"
-#endif
-
-#ifndef CONFIG_CLKIN_HALF
-#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
-#else
-#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
-#endif
-
-#ifndef CONFIG_PLL_BYPASS
-#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
-#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
-#else
-#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
-#endif
-
-#if (CONFIG_SCLK_DIV < 1)
-#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
-#endif
-
-#if (CONFIG_SCLK_DIV > 15)
-#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
-#endif
-
-#if (CONFIG_CCLK_DIV != 1)
-#if (CONFIG_CCLK_DIV != 2)
-#if (CONFIG_CCLK_DIV != 4)
-#if (CONFIG_CCLK_DIV != 8)
-#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value"
-#endif
-#endif
-#endif
-#endif
-
-#if (CONFIG_VCO_HZ > MAX_VC)
-#error "VCO selected is more than maximum value. Please change the VCO multipler"
-#endif
-
-#if (CONFIG_SCLK_HZ > 133000000)
-#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
-#endif
-
-#if (CONFIG_SCLK_HZ < 27000000)
-#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
-#endif
-
-#if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ)
-#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ)
-#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
-#error "Please select sclk less than cclk"
-#endif
-#endif
-#endif
-
-#if (CONFIG_CCLK_DIV == 1)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV1
-#endif
-#if (CONFIG_CCLK_DIV == 2)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV2
-#endif
-#if (CONFIG_CCLK_DIV == 4)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV4
-#endif
-#if (CONFIG_CCLK_DIV == 8)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV8
-#endif
-#ifndef CONFIG_CCLK_ACT_DIV
-#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
-#endif
-
-#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1)
-#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
-#endif
-
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-
#ifdef CONFIG_BF533
#define CPU "BF533"
#define CPUID 0x027a5000
@@ -249,58 +158,4 @@
#define CPUID 0x0
#endif
-#if (CONFIG_MEM_SIZE % 4)
-#error "SDRAM mem size must be multible of 4MB"
-#endif
-
-#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
-#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK)
-#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID)
-
-/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
-
-#define ANOMALY_05000158_WORKAROUND 0x200
-#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */
-#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \
- | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
-#else /*Write Through */
-#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_DIRTY \
- | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
-#endif
-
-#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
-#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
-#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
-#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
-
-#define SIZE_1K 0x00000400 /* 1K */
-#define SIZE_4K 0x00001000 /* 4K */
-#define SIZE_1M 0x00100000 /* 1M */
-#define SIZE_4M 0x00400000 /* 4M */
-
-#define MAX_CPLBS (16 * 2)
-
-/*
-* Number of required data CPLB switchtable entries
-* MEMSIZE / 4 (we mostly install 4M page size CPLBs
-* approx 16 for smaller 1MB page size CPLBs for allignment purposes
-* 1 for L1 Data Memory
-* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
-* 1 for ASYNC Memory
-*/
-
-
-#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2)
-
-/*
-* Number of required instruction CPLB switchtable entries
-* MEMSIZE / 4 (we mostly install 4M page size CPLBs
-* approx 12 for smaller 1MB page size CPLBs for allignment purposes
-* 1 for L1 Instruction Memory
-* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
-*/
-
-#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2)
-
#endif /* __MACH_BF533_H__ */
diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/include/asm-blackfin/mach-bf533/blackfin.h
index e4384491e97..f3b240abf17 100644
--- a/include/asm-blackfin/mach-bf533/blackfin.h
+++ b/include/asm-blackfin/mach-bf533/blackfin.h
@@ -38,7 +38,7 @@
#include "defBF532.h"
#include "anomaly.h"
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
#include "cdefBF532.h"
#endif
diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/include/asm-blackfin/mach-bf533/cdefBF532.h
index 74f967b235e..c803e14b529 100644
--- a/include/asm-blackfin/mach-bf533/cdefBF532.h
+++ b/include/asm-blackfin/mach-bf533/cdefBF532.h
@@ -30,11 +30,9 @@
#ifndef _CDEF_BF532_H
#define _CDEF_BF532_H
-/*
-#if !defined(__ADSPLPBLACKFIN__)
-#warning cdefBF532.h should only be included for 532 compatible chips.
-#endif
-*/
+
+#include <asm/blackfin.h>
+
/*include all Core registers and bit definitions*/
#include "defBF532.h"
@@ -65,7 +63,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
bfin_write32(SIC_IWR, IWR_ENABLE(0));
bfin_write16(VR_CTL, val);
- __builtin_bfin_ssync();
+ SSYNC();
local_irq_save(flags);
asm("IDLE;");
@@ -132,10 +130,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */
#define bfin_read_FIO_DIR() bfin_read16(FIO_DIR)
#define bfin_write_FIO_DIR(val) bfin_write16(FIO_DIR,val)
-#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C)
-#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C,val)
-#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S)
-#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S,val)
#define bfin_read_FIO_MASKA_C() bfin_read16(FIO_MASKA_C)
#define bfin_write_FIO_MASKA_C(val) bfin_write16(FIO_MASKA_C,val)
#define bfin_read_FIO_MASKA_S() bfin_read16(FIO_MASKA_S)
@@ -152,10 +146,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
#define bfin_write_FIO_BOTH(val) bfin_write16(FIO_BOTH,val)
#define bfin_read_FIO_INEN() bfin_read16(FIO_INEN)
#define bfin_write_FIO_INEN(val) bfin_write16(FIO_INEN,val)
-#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D)
-#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D,val)
-#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T)
-#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T,val)
#define bfin_read_FIO_MASKA_D() bfin_read16(FIO_MASKA_D)
#define bfin_write_FIO_MASKA_D(val) bfin_write16(FIO_MASKA_D,val)
#define bfin_read_FIO_MASKA_T() bfin_read16(FIO_MASKA_T)
@@ -165,6 +155,50 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
#define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T)
#define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val)
+
+#if ANOMALY_05000311
+#define BFIN_WRITE_FIO_FLAG(name) \
+static __inline__ void bfin_write_FIO_FLAG_ ## name (unsigned short val)\
+{\
+ unsigned long flags;\
+ local_irq_save(flags);\
+ bfin_write16(FIO_FLAG_ ## name,val);\
+ bfin_read_CHIPID();\
+ local_irq_restore(flags);\
+}
+BFIN_WRITE_FIO_FLAG(D)
+BFIN_WRITE_FIO_FLAG(C)
+BFIN_WRITE_FIO_FLAG(S)
+BFIN_WRITE_FIO_FLAG(T)
+
+#define BFIN_READ_FIO_FLAG(name) \
+static __inline__ unsigned short bfin_read_FIO_FLAG_ ## name (void)\
+{\
+ unsigned long flags;\
+ unsigned short ret;\
+ local_irq_save(flags);\
+ ret = bfin_read16(FIO_FLAG_ ## name);\
+ bfin_read_CHIPID();\
+ local_irq_restore(flags);\
+ return ret;\
+}
+BFIN_READ_FIO_FLAG(D)
+BFIN_READ_FIO_FLAG(C)
+BFIN_READ_FIO_FLAG(S)
+BFIN_READ_FIO_FLAG(T)
+
+#else
+#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D,val)
+#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C,val)
+#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S,val)
+#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T,val)
+#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T)
+#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C)
+#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S)
+#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D)
+#endif
+
+
/* DMA Controller */
#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG)
#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val)
diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h
index 6a3cf93f8b5..37134aaf995 100644
--- a/include/asm-blackfin/mach-bf533/defBF532.h
+++ b/include/asm-blackfin/mach-bf533/defBF532.h
@@ -104,6 +104,7 @@
#define UART_GCTL 0xFFC00424 /* Global Control Register */
/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI0_REGBASE 0xFFC00500
#define SPI_CTL 0xFFC00500 /* SPI Control Register */
#define SPI_FLG 0xFFC00504 /* SPI Flag register */
#define SPI_STAT 0xFFC00508 /* SPI Status register */
@@ -928,7 +929,7 @@
#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */
#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */
#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */
-#define SPI_LEN 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */
+#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */
#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */
diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h
index 9879e68e315..452fb825d89 100644
--- a/include/asm-blackfin/mach-bf533/irq.h
+++ b/include/asm-blackfin/mach-bf533/irq.h
@@ -128,6 +128,8 @@ Core Emulation **
#define IRQ_PF14 47
#define IRQ_PF15 48
+#define GPIO_IRQ_BASE IRQ_PF0
+
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PF15+1)
#else
diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/include/asm-blackfin/mach-bf533/mem_map.h
index e84baa3e939..94d8c4062eb 100644
--- a/include/asm-blackfin/mach-bf533/mem_map.h
+++ b/include/asm-blackfin/mach-bf533/mem_map.h
@@ -51,10 +51,10 @@
/* Level 1 Memory */
-#ifdef CONFIG_BLKFIN_CACHE
-#define BLKFIN_ICACHESIZE (16*1024)
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE (16*1024)
#else
-#define BLKFIN_ICACHESIZE (0*1024)
+#define BFIN_ICACHESIZE (0*1024)
#endif
/* Memory Map for ADSP-BF533 processors */
@@ -64,35 +64,35 @@
#define L1_DATA_A_START 0xFF800000
#define L1_DATA_B_START 0xFF900000
-#ifdef CONFIG_BLKFIN_CACHE
+#ifdef CONFIG_BFIN_ICACHE
#define L1_CODE_LENGTH (0x14000 - 0x4000)
#else
#define L1_CODE_LENGTH 0x14000
#endif
-#ifdef CONFIG_BLKFIN_DCACHE
+#ifdef CONFIG_BFIN_DCACHE
-#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#ifdef CONFIG_BFIN_DCACHE_BANKA
#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
#define L1_DATA_B_LENGTH 0x8000
-#define BLKFIN_DCACHESIZE (16*1024)
-#define BLKFIN_DSUPBANKS 1
+#define BFIN_DCACHESIZE (16*1024)
+#define BFIN_DSUPBANKS 1
#else
#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
#define L1_DATA_B_LENGTH (0x8000 - 0x4000)
-#define BLKFIN_DCACHESIZE (32*1024)
-#define BLKFIN_DSUPBANKS 2
+#define BFIN_DCACHESIZE (32*1024)
+#define BFIN_DSUPBANKS 2
#endif
#else
#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH 0x8000
#define L1_DATA_B_LENGTH 0x8000
-#define BLKFIN_DCACHESIZE (0*1024)
-#define BLKFIN_DSUPBANKS 0
-#endif /*CONFIG_BLKFIN_DCACHE*/
+#define BFIN_DCACHESIZE (0*1024)
+#define BFIN_DSUPBANKS 0
+#endif /*CONFIG_BFIN_DCACHE*/
#endif
/* Memory Map for ADSP-BF532 processors */
@@ -102,36 +102,36 @@
#define L1_DATA_A_START 0xFF804000
#define L1_DATA_B_START 0xFF904000
-#ifdef CONFIG_BLKFIN_CACHE
+#ifdef CONFIG_BFIN_ICACHE
#define L1_CODE_LENGTH (0xC000 - 0x4000)
#else
#define L1_CODE_LENGTH 0xC000
#endif
-#ifdef CONFIG_BLKFIN_DCACHE
+#ifdef CONFIG_BFIN_DCACHE
-#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#ifdef CONFIG_BFIN_DCACHE_BANKA
#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x4000 - 0x4000)
#define L1_DATA_B_LENGTH 0x4000
-#define BLKFIN_DCACHESIZE (16*1024)
-#define BLKFIN_DSUPBANKS 1
+#define BFIN_DCACHESIZE (16*1024)
+#define BFIN_DSUPBANKS 1
#else
#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x4000 - 0x4000)
#define L1_DATA_B_LENGTH (0x4000 - 0x4000)
-#define BLKFIN_DCACHESIZE (32*1024)
-#define BLKFIN_DSUPBANKS 2
+#define BFIN_DCACHESIZE (32*1024)
+#define BFIN_DSUPBANKS 2
#endif
#else
#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH 0x4000
#define L1_DATA_B_LENGTH 0x4000
-#define BLKFIN_DCACHESIZE (0*1024)
-#define BLKFIN_DSUPBANKS 0
-#endif /*CONFIG_BLKFIN_DCACHE*/
+#define BFIN_DCACHESIZE (0*1024)
+#define BFIN_DSUPBANKS 0
+#endif /*CONFIG_BFIN_DCACHE*/
#endif
/* Memory Map for ADSP-BF531 processors */
@@ -144,16 +144,16 @@
#define L1_DATA_B_LENGTH 0x0000
-#ifdef CONFIG_BLKFIN_DCACHE
+#ifdef CONFIG_BFIN_DCACHE
#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x4000 - 0x4000)
-#define BLKFIN_DCACHESIZE (16*1024)
-#define BLKFIN_DSUPBANKS 1
+#define BFIN_DCACHESIZE (16*1024)
+#define BFIN_DSUPBANKS 1
#else
#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH 0x4000
-#define BLKFIN_DCACHESIZE (0*1024)
-#define BLKFIN_DSUPBANKS 0
+#define BFIN_DCACHESIZE (0*1024)
+#define BFIN_DSUPBANKS 0
#endif
#endif
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index 4453e614c3b..2b66ecf489f 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -1,139 +1,144 @@
-
/*
- * File: include/asm-blackfin/mach-bf537/anomaly.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
+ * File: include/asm-blackfin/mach-bf537/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List
- * - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List
- * - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List
+ * - Revision M, March 13, 2007; ADSP-BF537 Blackfin Processor Anomaly List
+ * - Revision L, March 13, 2007; ADSP-BF536 Blackfin Processor Anomaly List
+ * - Revision M, March 13, 2007; ADSP-BF534 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
/* We do not support 0.1 silicon - sorry */
-#if (defined(CONFIG_BF_REV_0_1))
-#error Kernel will not work on BF537/6/4 Version 0.1
+#if __SILICON_REVISION__ < 2
+# error Kernel will not work on BF537 silicon version 0.0 or 0.1
#endif
-#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2))
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
- slot1 and store of a P register in slot 2 is not
- supported */
-#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
- Channel DMA stops */
-#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
- registers. */
-#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
- upper bits*/
-#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
- syncs */
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
-#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is
- Changed */
-#endif
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
- SPORT external receive and transmit clocks. */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
- VDDint <=0.9V */
-#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
-#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
- an edge is detected may clear interrupt */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
- not restored */
-#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
- control */
-#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
- killed in a particular stage*/
-#define ANOMALY_05000310 /* False hardware errors caused by fetches at the
- * boundary of reserved memory */
-#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
- registers are interrupted */
-#define ANOMALY_05000313 /* PPI is level sensitive on first transfer */
-#define ANOMALY_05000322 /* EMAC RMII mode at 10-Base-T speed: RX frames not
- * received properly */
+#if defined(__ADSPBF534__)
+# define ANOMALY_BF534 1
+#else
+# define ANOMALY_BF534 0
#endif
-
-#if defined(CONFIG_BF_REV_0_2)
-#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
- IDLE around a Change of Control causes
- unpredictable results */
-#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
- (TDM) */
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
-#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */
+#if defined(__ADSPBF536__)
+# define ANOMALY_BF536 1
+#else
+# define ANOMALY_BF536 0
#endif
-#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
-#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
- interrupt not functional */
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
-#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */
+#if defined(__ADSPBF537__)
+# define ANOMALY_BF537 1
+#else
+# define ANOMALY_BF537 0
#endif
-#define ANOMALY_05000257 /* An interrupt or exception during short Hardware
- loops may cause the instruction fetch unit to
- malfunction */
-#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
- the ICPLB Data registers differ */
-#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
-#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
-#define ANOMALY_05000262 /* Stores to data cache may be lost */
-#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
-#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
- instruction will cause an infinite stall in the
- second to last instruction in a hardware loop */
-#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running
- and non-zero DEB_TRAFFIC_PERIOD value */
-#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
- internal voltage regulator (VDDint) to decrease */
-#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
- an edge is detected may clear interrupt */
-#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
- DMA system instability */
-#define ANOMALY_05000280 /* SPI Master boot mode does not work well with
- Atmel Dataflash devices */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context
- * is not restored */
-#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
- * control */
-#define ANOMALY_05000283 /* System MMR Write Is Stalled Indefinitely When
- * Killed in a Particular Stage */
-#define ANOMALY_05000285 /* New Feature: EMAC TX DMA Word Alignment
- * (Not Available On Older Silicon) */
-#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */
-#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously
- * On Next System MMR Access */
-#define ANOMALY_05000316 /* EMAC RMII mode: collisions occur in Full Duplex
- * mode */
-#define ANOMALY_05000321 /* EMAC RMII mode: TX frames in half duplex fail with
- * status No Carrier */
-#endif /* CONFIG_BF_REV_0_2 */
-#endif /* _MACH_ANOMALY_H_ */
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN bit is not valid after a Peripheral Receive Channel DMA stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H cannot be used to access 16-bit System MMR registers */
+#define ANOMALY_05000122 (1)
+/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
+/* PPI_DELAY not functional in PPI modes with 0 frame syncs */
+#define ANOMALY_05000180 (1)
+/* Instruction Cache Is Not Functional */
+#define ANOMALY_05000237 (__SILICON_REVISION__ < 2)
+/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
+/* Spurious Hardware Error from an access in the shadow of a conditional branch */
+#define ANOMALY_05000245 (1)
+/* CLKIN Buffer Output Enable Reset Behavior Is Changed */
+#define ANOMALY_05000247 (1)
+/* Incorrect Bit-Shift of Data Word in Multichannel (TDM) mode in certain conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
+/* EMAC Tx DMA error after an early frame abort */
+#define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
+/* Maximum external clock speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT mode with external clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
+/* Entering Hibernate Mode with RTC Seconds event interrupt not functional */
+#define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
+/* EMAC MDIO input latched on wrong MDC edge */
+#define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
+/* Interrupt/Exception during short hardware loop may cause bad instruction fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
+/* Instruction Cache is corrupted when bits 9 and 12 of the ICPLB Data registers differ */
+#define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2)
+/* ICPLB_STATUS MMR register may be corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ == 2)
+/* DCPLB_FAULT_ADDR MMR register may be corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
+/* Stores to data cache may be lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 3)
+/* Hardware loop corrupted when taking an ICPLB exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ == 2)
+/* CSYNC/SSYNC/IDLE causes infinite stall in second to last instruction in hardware loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
+/* Sensitivity to noise with slow input edge rates on external SPORT TX and RX clocks */
+#define ANOMALY_05000265 (1)
+/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
+#define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
+/* High I/O activity causes output voltage of internal voltage regulator (VDDint) to decrease */
+#define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
+/* Certain data cache write through modes fail for VDDint <=0.9V */
+#define ANOMALY_05000272 (1)
+/* Writes to Synchronous SDRAM memory may be lost */
+#define ANOMALY_05000273 (__SILICON_REVISION__ < 3)
+/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
+/* Disabling Peripherals with DMA running may cause DMA system instability */
+#define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
+/* SPI Master boot mode does not work well with Atmel Data flash devices */
+#define ANOMALY_05000280 (1)
+/* False Hardware Error Exception when ISR context is not restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
+/* Memory DMA corruption with 32-bit data and traffic control */
+#define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+#define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
+/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
+#define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
+/* SPORTs may receive bad data if FIFOs fill up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
+/* Memory to memory DMA source/destination descriptors must be in same memory space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
+#define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
+/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
+/* Writing UART_THR while UART clock is disabled sends erroneous start bit */
+#define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
+/* False hardware errors caused by fetches at the boundary of reserved memory */
+#define ANOMALY_05000310 (1)
+/* Errors when SSYNC, CSYNC, or loads to LT, LB and LC registers are interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI is level sensitive on first transfer */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+#define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
+/* EMAC RMII mode: collisions occur in Full Duplex mode */
+#define ANOMALY_05000316 (__SILICON_REVISION__ < 3)
+/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */
+#define ANOMALY_05000321 (__SILICON_REVISION__ < 3)
+/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */
+#define ANOMALY_05000322 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000323 (0)
+
+#endif
diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/include/asm-blackfin/mach-bf537/bf537.h
index b8924cd7730..cfe2a221112 100644
--- a/include/asm-blackfin/mach-bf537/bf537.h
+++ b/include/asm-blackfin/mach-bf537/bf537.h
@@ -62,12 +62,12 @@
/***************************/
-#define BLKFIN_DSUBBANKS 4
-#define BLKFIN_DWAYS 2
-#define BLKFIN_DLINES 64
-#define BLKFIN_ISUBBANKS 4
-#define BLKFIN_IWAYS 4
-#define BLKFIN_ILINES 32
+#define BFIN_DSUBBANKS 4
+#define BFIN_DWAYS 2
+#define BFIN_DLINES 64
+#define BFIN_ISUBBANKS 4
+#define BFIN_IWAYS 4
+#define BFIN_ILINES 32
#define WAY0_L 0x1
#define WAY1_L 0x2
@@ -121,97 +121,6 @@
#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO)
-#define MAX_VC 650000000
-#define MIN_VC 50000000
-
-/********************************PLL Settings **************************************/
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#if (CONFIG_VCO_MULT < 0)
-#error "VCO Multiplier is less than 0. Please select a different value"
-#endif
-
-#if (CONFIG_VCO_MULT == 0)
-#error "VCO Multiplier should be greater than 0. Please select a different value"
-#endif
-
-#if (CONFIG_VCO_MULT > 64)
-#error "VCO Multiplier is more than 64. Please select a different value"
-#endif
-
-#ifndef CONFIG_CLKIN_HALF
-#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
-#else
-#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
-#endif
-
-#ifndef CONFIG_PLL_BYPASS
-#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
-#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
-#else
-#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
-#endif
-
-#if (CONFIG_SCLK_DIV < 1)
-#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
-#endif
-
-#if (CONFIG_SCLK_DIV > 15)
-#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
-#endif
-
-#if (CONFIG_CCLK_DIV != 1)
-#if (CONFIG_CCLK_DIV != 2)
-#if (CONFIG_CCLK_DIV != 4)
-#if (CONFIG_CCLK_DIV != 8)
-#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value"
-#endif
-#endif
-#endif
-#endif
-
-#if (CONFIG_VCO_HZ > MAX_VC)
-#error "VCO selected is more than maximum value. Please change the VCO multipler"
-#endif
-
-#if (CONFIG_SCLK_HZ > 133000000)
-#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
-#endif
-
-#if (CONFIG_SCLK_HZ < 27000000)
-#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
-#endif
-
-#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ)
-#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ)
-#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
-#error "Please select sclk less than cclk"
-#endif
-#endif
-#endif
-
-#if (CONFIG_CCLK_DIV == 1)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV1
-#endif
-#if (CONFIG_CCLK_DIV == 2)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV2
-#endif
-#if (CONFIG_CCLK_DIV == 4)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV4
-#endif
-#if (CONFIG_CCLK_DIV == 8)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV8
-#endif
-#ifndef CONFIG_CCLK_ACT_DIV
-#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
-#endif
-
-#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1)
-#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
-#endif
-
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-
#ifdef CONFIG_BF537
#define CPU "BF537"
#define CPUID 0x027c8000
@@ -229,59 +138,4 @@
#define CPUID 0x0
#endif
-#if (CONFIG_MEM_SIZE % 4)
-#error "SDRAM mem size must be multible of 4MB"
-#endif
-
-#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
-#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK)
-#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID)
-
-/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
-
-#define ANOMALY_05000158_WORKAROUND 0x200
-#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */
-#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \
- | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
-#else /*Write Through */
-#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW \
- | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
-#endif
-
-
-#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY )
-#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
-#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
-#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY )
-
-#define SIZE_1K 0x00000400 /* 1K */
-#define SIZE_4K 0x00001000 /* 4K */
-#define SIZE_1M 0x00100000 /* 1M */
-#define SIZE_4M 0x00400000 /* 4M */
-
-#define MAX_CPLBS (16 * 2)
-
-/*
-* Number of required data CPLB switchtable entries
-* MEMSIZE / 4 (we mostly install 4M page size CPLBs
-* approx 16 for smaller 1MB page size CPLBs for allignment purposes
-* 1 for L1 Data Memory
-* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
-* 1 for ASYNC Memory
-*/
-
-
-#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2)
-
-/*
-* Number of required instruction CPLB switchtable entries
-* MEMSIZE / 4 (we mostly install 4M page size CPLBs
-* approx 12 for smaller 1MB page size CPLBs for allignment purposes
-* 1 for L1 Instruction Memory
-* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
-*/
-
-#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2)
-
#endif /* __MACH_BF537_H__ */
diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h
index bbd97051ec9..53fcfa3408d 100644
--- a/include/asm-blackfin/mach-bf537/blackfin.h
+++ b/include/asm-blackfin/mach-bf537/blackfin.h
@@ -43,7 +43,7 @@
#include "defBF537.h"
#endif
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
#include "cdefBF534.h"
/* UART 0*/
@@ -143,284 +143,6 @@
#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
#define STOPCK_OFF STOPCK
-/* FIO USE PORT F*/
-#ifdef CONFIG_BF537_PORT_F
-#define bfin_read_PORT_FER() bfin_read_PORTF_FER()
-#define bfin_write_PORT_FER(val) bfin_write_PORTF_FER(val)
-#define bfin_read_FIO_FLAG_D() bfin_read_PORTFIO()
-#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTFIO(val)
-#define bfin_read_FIO_FLAG_C() bfin_read_PORTFIO_CLEAR()
-#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTFIO_CLEAR(val)
-#define bfin_read_FIO_FLAG_S() bfin_read_PORTFIO_SET()
-#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTFIO_SET(val)
-#define bfin_read_FIO_FLAG_T() bfin_read_PORTFIO_TOGGLE()
-#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTFIO_TOGGLE(val)
-#define bfin_read_FIO_MASKA_D() bfin_read_PORTFIO_MASKA()
-#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTFIO_MASKA(val)
-#define bfin_read_FIO_MASKA_C() bfin_read_PORTFIO_MASKA_CLEAR()
-#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTFIO_MASKA_CLEAR(val)
-#define bfin_read_FIO_MASKA_S() bfin_read_PORTFIO_MASKA_SET()
-#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTFIO_MASKA_SET(val)
-#define bfin_read_FIO_MASKA_T() bfin_read_PORTFIO_MASKA_TOGGLE()
-#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTFIO_MASKA_TOGGLE(val)
-#define bfin_read_FIO_MASKB_D() bfin_read_PORTFIO_MASKB()
-#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTFIO_MASKB(val)
-#define bfin_read_FIO_MASKB_C() bfin_read_PORTFIO_MASKB_CLEAR()
-#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTFIO_MASKB_CLEAR(val)
-#define bfin_read_FIO_MASKB_S() bfin_read_PORTFIO_MASKB_SET()
-#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTFIO_MASKB_SET(val)
-#define bfin_read_FIO_MASKB_T() bfin_read_PORTFIO_MASKB_TOGGLE()
-#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTFIO_MASKB_TOGGLE(val)
-#define bfin_read_FIO_DIR() bfin_read_PORTFIO_DIR()
-#define bfin_write_FIO_DIR(val) bfin_write_PORTFIO_DIR(val)
-#define bfin_read_FIO_POLAR() bfin_read_PORTFIO_POLAR()
-#define bfin_write_FIO_POLAR(val) bfin_write_PORTFIO_POLAR(val)
-#define bfin_read_FIO_EDGE() bfin_read_PORTFIO_EDGE()
-#define bfin_write_FIO_EDGE(val) bfin_write_PORTFIO_EDGE(val)
-#define bfin_read_FIO_BOTH() bfin_read_PORTFIO_BOTH()
-#define bfin_write_FIO_BOTH(val) bfin_write_PORTFIO_BOTH(val)
-#define bfin_read_FIO_INEN() bfin_read_PORTFIO_INEN()
-#define bfin_write_FIO_INEN(val) bfin_write_PORTFIO_INEN(val)
-
-#define bfin_read_FIO_FLAG_D() bfin_read_PORTFIO()
-#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTFIO(val)
-#define FIO_FLAG_D PORTFIO
-#define bfin_read_FIO_FLAG_C() bfin_read_PORTFIO_CLEAR()
-#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTFIO_CLEAR(val)
-#define FIO_FLAG_C PORTFIO_CLEAR
-#define bfin_read_FIO_FLAG_S() bfin_read_PORTFIO_SET()
-#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTFIO_SET(val)
-#define FIO_FLAG_S PORTFIO_SET
-#define bfin_read_FIO_FLAG_T() bfin_read_PORTFIO_TOGGLE()
-#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTFIO_TOGGLE(val)
-#define FIO_FLAG_T PORTFIO_TOGGLE
-#define bfin_read_FIO_MASKA_D() bfin_read_PORTFIO_MASKA()
-#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTFIO_MASKA(val)
-#define FIO_MASKA_D PORTFIO_MASKA
-#define bfin_read_FIO_MASKA_C() bfin_read_PORTFIO_MASKA_CLEAR()
-#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTFIO_MASKA_CLEAR(val)
-#define FIO_MASKA_C PORTFIO_MASKA_CLEAR
-#define bfin_read_FIO_MASKA_S() bfin_read_PORTFIO_MASKA_SET()
-#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTFIO_MASKA_SET(val)
-#define FIO_MASKA_S PORTFIO_MASKA_SET
-#define bfin_read_FIO_MASKA_T() bfin_read_PORTFIO_MASKA_TOGGLE()
-#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTFIO_MASKA_TOGGLE(val)
-#define FIO_MASKA_T PORTFIO_MASKA_TOGGLE
-#define bfin_read_FIO_MASKB_D() bfin_read_PORTFIO_MASKB()
-#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTFIO_MASKB(val)
-#define FIO_MASKB_D PORTFIO_MASKB
-#define bfin_read_FIO_MASKB_C() bfin_read_PORTFIO_MASKB_CLEAR()
-#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTFIO_MASKB_CLEAR(val)
-#define FIO_MASKB_C PORTFIO_MASKB_CLEAR
-#define bfin_read_FIO_MASKB_S() bfin_read_PORTFIO_MASKB_SET()
-#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTFIO_MASKB_SET(val)
-#define FIO_MASKB_S PORTFIO_MASKB_SET
-#define bfin_read_FIO_MASKB_T() bfin_read_PORTFIO_MASKB_TOGGLE()
-#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTFIO_MASKB_TOGGLE(val)
-#define FIO_MASKB_T PORTFIO_MASKB_TOGGLE
-#define bfin_read_FIO_DIR() bfin_read_PORTFIO_DIR()
-#define bfin_write_FIO_DIR(val) bfin_write_PORTFIO_DIR(val)
-#define FIO_DIR PORTFIO_DIR
-#define bfin_read_FIO_POLAR() bfin_read_PORTFIO_POLAR()
-#define bfin_write_FIO_POLAR(val) bfin_write_PORTFIO_POLAR(val)
-#define FIO_POLAR PORTFIO_POLAR
-#define bfin_read_FIO_EDGE() bfin_read_PORTFIO_EDGE()
-#define bfin_write_FIO_EDGE(val) bfin_write_PORTFIO_EDGE(val)
-#define FIO_EDGE PORTFIO_EDGE
-#define bfin_read_FIO_BOTH() bfin_read_PORTFIO_BOTH()
-#define bfin_write_FIO_BOTH(val) bfin_write_PORTFIO_BOTH(val)
-#define FIO_BOTH PORTFIO_BOTH
-#define bfin_read_FIO_INEN() bfin_read_PORTFIO_INEN()
-#define bfin_write_FIO_INEN(val) bfin_write_PORTFIO_INEN(val)
-#define FIO_INEN PORTFIO_INEN
-#endif
-
-/* FIO USE PORT G*/
-#ifdef CONFIG_BF537_PORT_G
-#define bfin_read_PORT_FER() bfin_read_PORTG_FER()
-#define bfin_write_PORT_FER(val) bfin_write_PORTG_FER(val)
-#define bfin_read_FIO_FLAG_D() bfin_read_PORTGIO()
-#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTGIO(val)
-#define bfin_read_FIO_FLAG_C() bfin_read_PORTGIO_CLEAR()
-#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTGIO_CLEAR(val)
-#define bfin_read_FIO_FLAG_S() bfin_read_PORTGIO_SET()
-#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTGIO_SET(val)
-#define bfin_read_FIO_FLAG_T() bfin_read_PORTGIO_TOGGLE()
-#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTGIO_TOGGLE(val)
-#define bfin_read_FIO_MASKA_D() bfin_read_PORTGIO_MASKA()
-#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTGIO_MASKA(val)
-#define bfin_read_FIO_MASKA_C() bfin_read_PORTGIO_MASKA_CLEAR()
-#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTGIO_MASKA_CLEAR(val)
-#define bfin_read_FIO_MASKA_S() bfin_read_PORTGIO_MASKA_SET()
-#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTGIO_MASKA_SET(val)
-#define bfin_read_FIO_MASKA_T() bfin_read_PORTGIO_MASKA_TOGGLE()
-#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTGIO_MASKA_TOGGLE(val)
-#define bfin_read_FIO_MASKB_D() bfin_read_PORTGIO_MASKB()
-#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTGIO_MASKB(val)
-#define bfin_read_FIO_MASKB_C() bfin_read_PORTGIO_MASKB_CLEAR()
-#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTGIO_MASKB_CLEAR(val)
-#define bfin_read_FIO_MASKB_S() bfin_read_PORTGIO_MASKB_SET()
-#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTGIO_MASKB_SET(val)
-#define bfin_read_FIO_MASKB_T() bfin_read_PORTGIO_MASKB_TOGGLE()
-#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTGIO_MASKB_TOGGLE(val)
-#define bfin_read_FIO_DIR() bfin_read_PORTGIO_DIR()
-#define bfin_write_FIO_DIR(val) bfin_write_PORTGIO_DIR(val)
-#define bfin_read_FIO_POLAR() bfin_read_PORTGIO_POLAR()
-#define bfin_write_FIO_POLAR(val) bfin_write_PORTGIO_POLAR(val)
-#define bfin_read_FIO_EDGE() bfin_read_PORTGIO_EDGE()
-#define bfin_write_FIO_EDGE(val) bfin_write_PORTGIO_EDGE(val)
-#define bfin_read_FIO_BOTH() bfin_read_PORTGIO_BOTH()
-#define bfin_write_FIO_BOTH(val) bfin_write_PORTGIO_BOTH(val)
-#define bfin_read_FIO_INEN() bfin_read_PORTGIO_INEN()
-#define bfin_write_FIO_INEN(val) bfin_write_PORTGIO_INEN(val)
-
-#define bfin_read_FIO_FLAG_D() bfin_read_PORTGIO()
-#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTGIO(val)
-#define FIO_FLAG_D PORTGIO
-#define bfin_read_FIO_FLAG_C() bfin_read_PORTGIO_CLEAR()
-#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTGIO_CLEAR(val)
-#define FIO_FLAG_C PORTGIO_CLEAR
-#define bfin_read_FIO_FLAG_S() bfin_read_PORTGIO_SET()
-#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTGIO_SET(val)
-#define FIO_FLAG_S PORTGIO_SET
-#define bfin_read_FIO_FLAG_T() bfin_read_PORTGIO_TOGGLE()
-#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTGIO_TOGGLE(val)
-#define FIO_FLAG_T PORTGIO_TOGGLE
-#define bfin_read_FIO_MASKA_D() bfin_read_PORTGIO_MASKA()
-#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTGIO_MASKA(val)
-#define FIO_MASKA_D PORTGIO_MASKA
-#define bfin_read_FIO_MASKA_C() bfin_read_PORTGIO_MASKA_CLEAR()
-#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTGIO_MASKA_CLEAR(val)
-#define FIO_MASKA_C PORTGIO_MASKA_CLEAR
-#define bfin_read_FIO_MASKA_S() bfin_read_PORTGIO_MASKA_SET()
-#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTGIO_MASKA_SET(val)
-#define FIO_MASKA_S PORTGIO_MASKA_SET
-#define bfin_read_FIO_MASKA_T() bfin_read_PORTGIO_MASKA_TOGGLE()
-#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTGIO_MASKA_TOGGLE(val)
-#define FIO_MASKA_T PORTGIO_MASKA_TOGGLE
-#define bfin_read_FIO_MASKB_D() bfin_read_PORTGIO_MASKB()
-#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTGIO_MASKB(val)
-#define FIO_MASKB_D PORTGIO_MASKB
-#define bfin_read_FIO_MASKB_C() bfin_read_PORTGIO_MASKB_CLEAR()
-#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTGIO_MASKB_CLEAR(val)
-#define FIO_MASKB_C PORTGIO_MASKB_CLEAR
-#define bfin_read_FIO_MASKB_S() bfin_read_PORTGIO_MASKB_SET()
-#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTGIO_MASKB_SET(val)
-#define FIO_MASKB_S PORTGIO_MASKB_SET
-#define bfin_read_FIO_MASKB_T() bfin_read_PORTGIO_MASKB_TOGGLE()
-#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTGIO_MASKB_TOGGLE(val)
-#define FIO_MASKB_T PORTGIO_MASKB_TOGGLE
-#define bfin_read_FIO_DIR() bfin_read_PORTGIO_DIR()
-#define bfin_write_FIO_DIR(val) bfin_write_PORTGIO_DIR(val)
-#define FIO_DIR PORTGIO_DIR
-#define bfin_read_FIO_POLAR() bfin_read_PORTGIO_POLAR()
-#define bfin_write_FIO_POLAR(val) bfin_write_PORTGIO_POLAR(val)
-#define FIO_POLAR PORTGIO_POLAR
-#define bfin_read_FIO_EDGE() bfin_read_PORTGIO_EDGE()
-#define bfin_write_FIO_EDGE(val) bfin_write_PORTGIO_EDGE(val)
-#define FIO_EDGE PORTGIO_EDGE
-#define bfin_read_FIO_BOTH() bfin_read_PORTGIO_BOTH()
-#define bfin_write_FIO_BOTH(val) bfin_write_PORTGIO_BOTH(val)
-#define FIO_BOTH PORTGIO_BOTH
-#define bfin_read_FIO_INEN() bfin_read_PORTGIO_INEN()
-#define bfin_write_FIO_INEN(val) bfin_write_PORTGIO_INEN(val)
-#define FIO_INEN PORTGIO_INEN
-
-#endif
-
-/* FIO USE PORT H*/
-#ifdef CONFIG_BF537_PORT_H
-#define bfin_read_PORT_FER() bfin_read_PORTH_FER()
-#define bfin_write_PORT_FER(val) bfin_write_PORTH_FER(val)
-#define bfin_read_FIO_FLAG_D() bfin_read_PORTHIO()
-#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTHIO(val)
-#define bfin_read_FIO_FLAG_C() bfin_read_PORTHIO_CLEAR()
-#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTHIO_CLEAR(val)
-#define bfin_read_FIO_FLAG_S() bfin_read_PORTHIO_SET()
-#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTHIO_SET(val)
-#define bfin_read_FIO_FLAG_T() bfin_read_PORTHIO_TOGGLE()
-#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTHIO_TOGGLE(val)
-#define bfin_read_FIO_MASKA_D() bfin_read_PORTHIO_MASKA()
-#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTHIO_MASKA(val)
-#define bfin_read_FIO_MASKA_C() bfin_read_PORTHIO_MASKA_CLEAR()
-#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTHIO_MASKA_CLEAR(val)
-#define bfin_read_FIO_MASKA_S() bfin_read_PORTHIO_MASKA_SET()
-#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTHIO_MASKA_SET(val)
-#define bfin_read_FIO_MASKA_T() bfin_read_PORTHIO_MASKA_TOGGLE()
-#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTHIO_MASKA_TOGGLE(val)
-#define bfin_read_FIO_MASKB_D() bfin_read_PORTHIO_MASKB()
-#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTHIO_MASKB(val)
-#define bfin_read_FIO_MASKB_C() bfin_read_PORTHIO_MASKB_CLEAR()
-#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTHIO_MASKB_CLEAR(val)
-#define bfin_read_FIO_MASKB_S() bfin_read_PORTHIO_MASKB_SET()
-#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTHIO_MASKB_SET(val)
-#define bfin_read_FIO_MASKB_T() bfin_read_PORTHIO_MASKB_TOGGLE()
-#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTHIO_MASKB_TOGGLE(val)
-#define bfin_read_FIO_DIR() bfin_read_PORTHIO_DIR()
-#define bfin_write_FIO_DIR(val) bfin_write_PORTHIO_DIR(val)
-#define bfin_read_FIO_POLAR() bfin_read_PORTHIO_POLAR()
-#define bfin_write_FIO_POLAR(val) bfin_write_PORTHIO_POLAR(val)
-#define bfin_read_FIO_EDGE() bfin_read_PORTHIO_EDGE()
-#define bfin_write_FIO_EDGE(val) bfin_write_PORTHIO_EDGE(val)
-#define bfin_read_FIO_BOTH() bfin_read_PORTHIO_BOTH()
-#define bfin_write_FIO_BOTH(val) bfin_write_PORTHIO_BOTH(val)
-#define bfin_read_FIO_INEN() bfin_read_PORTHIO_INEN()
-#define bfin_write_FIO_INEN(val) bfin_write_PORTHIO_INEN(val)
-
-#define bfin_read_FIO_FLAG_D() bfin_read_PORTHIO()
-#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTHIO(val)
-#define FIO_FLAG_D PORTHIO
-#define bfin_read_FIO_FLAG_C() bfin_read_PORTHIO_CLEAR()
-#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTHIO_CLEAR(val)
-#define FIO_FLAG_C PORTHIO_CLEAR
-#define bfin_read_FIO_FLAG_S() bfin_read_PORTHIO_SET()
-#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTHIO_SET(val)
-#define FIO_FLAG_S PORTHIO_SET
-#define bfin_read_FIO_FLAG_T() bfin_read_PORTHIO_TOGGLE()
-#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTHIO_TOGGLE(val)
-#define FIO_FLAG_T PORTHIO_TOGGLE
-#define bfin_read_FIO_MASKA_D() bfin_read_PORTHIO_MASKA()
-#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTHIO_MASKA(val)
-#define FIO_MASKA_D PORTHIO_MASKA
-#define bfin_read_FIO_MASKA_C() bfin_read_PORTHIO_MASKA_CLEAR()
-#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTHIO_MASKA_CLEAR(val)
-#define FIO_MASKA_C PORTHIO_MASKA_CLEAR
-#define bfin_read_FIO_MASKA_S() bfin_read_PORTHIO_MASKA_SET()
-#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTHIO_MASKA_SET(val)
-#define FIO_MASKA_S PORTHIO_MASKA_SET
-#define bfin_read_FIO_MASKA_T() bfin_read_PORTHIO_MASKA_TOGGLE()
-#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTHIO_MASKA_TOGGLE(val)
-#define FIO_MASKA_T PORTHIO_MASKA_TOGGLE
-#define bfin_read_FIO_MASKB_D() bfin_read_PORTHIO_MASKB()
-#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTHIO_MASKB(val)
-#define FIO_MASKB_D PORTHIO_MASKB
-#define bfin_read_FIO_MASKB_C() bfin_read_PORTHIO_MASKB_CLEAR()
-#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTHIO_MASKB_CLEAR(val)
-#define FIO_MASKB_C PORTHIO_MASKB_CLEAR
-#define bfin_read_FIO_MASKB_S() bfin_read_PORTHIO_MASKB_SET()
-#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTHIO_MASKB_SET(val)
-#define FIO_MASKB_S PORTHIO_MASKB_SET
-#define bfin_read_FIO_MASKB_T() bfin_read_PORTHIO_MASKB_TOGGLE()
-#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTHIO_MASKB_TOGGLE(val)
-#define FIO_MASKB_T PORTHIO_MASKB_TOGGLE
-#define bfin_read_FIO_DIR() bfin_read_PORTHIO_DIR()
-#define bfin_write_FIO_DIR(val) bfin_write_PORTHIO_DIR(val)
-#define FIO_DIR PORTHIO_DIR
-#define bfin_read_FIO_POLAR() bfin_read_PORTHIO_POLAR()
-#define bfin_write_FIO_POLAR(val) bfin_write_PORTHIO_POLAR(val)
-#define FIO_POLAR PORTHIO_POLAR
-#define bfin_read_FIO_EDGE() bfin_read_PORTHIO_EDGE()
-#define bfin_write_FIO_EDGE(val) bfin_write_PORTHIO_EDGE(val)
-#define FIO_EDGE PORTHIO_EDGE
-#define bfin_read_FIO_BOTH() bfin_read_PORTHIO_BOTH()
-#define bfin_write_FIO_BOTH(val) bfin_write_PORTHIO_BOTH(val)
-#define FIO_BOTH PORTHIO_BOTH
-#define bfin_read_FIO_INEN() bfin_read_PORTHIO_INEN()
-#define bfin_write_FIO_INEN(val) bfin_write_PORTHIO_INEN(val)
-#define FIO_INEN PORTHIO_INEN
-
-#endif
-
/* PLL_DIV Masks */
#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/include/asm-blackfin/mach-bf537/cdefBF534.h
index 84e58fa73dc..78227bc855d 100644
--- a/include/asm-blackfin/mach-bf537/cdefBF534.h
+++ b/include/asm-blackfin/mach-bf537/cdefBF534.h
@@ -32,6 +32,8 @@
#ifndef _CDEF_BF534_H
#define _CDEF_BF534_H
+#include <asm/blackfin.h>
+
/* Include all Core registers and bit definitions */
#include "defBF534.h"
@@ -57,7 +59,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
bfin_write32(SIC_IWR, IWR_ENABLE(0));
bfin_write16(VR_CTL, val);
- __builtin_bfin_ssync();
+ SSYNC();
local_irq_save(flags);
asm("IDLE;");
diff --git a/include/asm-blackfin/mach-bf537/defBF534.h b/include/asm-blackfin/mach-bf537/defBF534.h
index 1859f2fee5a..d0d80d3152b 100644
--- a/include/asm-blackfin/mach-bf537/defBF534.h
+++ b/include/asm-blackfin/mach-bf537/defBF534.h
@@ -86,6 +86,7 @@
#define UART0_GCTL 0xFFC00424 /* Global Control Register */
/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI0_REGBASE 0xFFC00500
#define SPI_CTL 0xFFC00500 /* SPI Control Register */
#define SPI_FLG 0xFFC00504 /* SPI Flag register */
#define SPI_STAT 0xFFC00508 /* SPI Status register */
@@ -456,6 +457,7 @@
#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */
/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
+#define TWI0_REGBASE 0xFFC01400
#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */
#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */
#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */
@@ -1165,7 +1167,7 @@
#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */
#define PSSE 0x0010 /* Slave-Select Input Enable */
#define EMISO 0x0020 /* Enable MISO As Output */
-#define SPI_SIZE 0x0100 /* Size of Words (16/8* Bits) */
+#define SIZE 0x0100 /* Size of Words (16/8* Bits) */
#define LSBF 0x0200 /* LSB First */
#define CPHA 0x0400 /* Clock Phase */
#define CPOL 0x0800 /* Clock Polarity */
diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h
index 8af2a832ef6..36c44bc1a91 100644
--- a/include/asm-blackfin/mach-bf537/irq.h
+++ b/include/asm-blackfin/mach-bf537/irq.h
@@ -160,6 +160,8 @@ Core Emulation **
#define IRQ_PH14 96
#define IRQ_PH15 97
+#define GPIO_IRQ_BASE IRQ_PF0
+
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PH15+1)
#else
diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/include/asm-blackfin/mach-bf537/mem_map.h
index 2a808c1202b..18759e38eaa 100644
--- a/include/asm-blackfin/mach-bf537/mem_map.h
+++ b/include/asm-blackfin/mach-bf537/mem_map.h
@@ -52,10 +52,10 @@
/* Memory Map for ADSP-BF537 processors */
-#ifdef CONFIG_BLKFIN_CACHE
-#define BLKFIN_ICACHESIZE (16*1024)
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE (16*1024)
#else
-#define BLKFIN_ICACHESIZE (0*1024)
+#define BFIN_ICACHESIZE (0*1024)
#endif
@@ -66,29 +66,29 @@
#define L1_CODE_LENGTH 0xC000
-#ifdef CONFIG_BLKFIN_DCACHE
+#ifdef CONFIG_BFIN_DCACHE
-#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#ifdef CONFIG_BFIN_DCACHE_BANKA
#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
#define L1_DATA_B_LENGTH 0x8000
-#define BLKFIN_DCACHESIZE (16*1024)
-#define BLKFIN_DSUPBANKS 1
+#define BFIN_DCACHESIZE (16*1024)
+#define BFIN_DSUPBANKS 1
#else
#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
#define L1_DATA_B_LENGTH (0x8000 - 0x4000)
-#define BLKFIN_DCACHESIZE (32*1024)
-#define BLKFIN_DSUPBANKS 2
+#define BFIN_DCACHESIZE (32*1024)
+#define BFIN_DSUPBANKS 2
#endif
#else
#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH 0x8000
#define L1_DATA_B_LENGTH 0x8000
-#define BLKFIN_DCACHESIZE (0*1024)
-#define BLKFIN_DSUPBANKS 0
-#endif /*CONFIG_BLKFIN_DCACHE*/
+#define BFIN_DCACHESIZE (0*1024)
+#define BFIN_DSUPBANKS 0
+#endif /*CONFIG_BFIN_DCACHE*/
#endif /*CONFIG_BF537*/
@@ -102,30 +102,30 @@
#define L1_CODE_LENGTH 0xC000
-#ifdef CONFIG_BLKFIN_DCACHE
+#ifdef CONFIG_BFIN_DCACHE
-#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#ifdef CONFIG_BFIN_DCACHE_BANKA
#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x4000 - 0x4000)
#define L1_DATA_B_LENGTH 0x4000
-#define BLKFIN_DCACHESIZE (16*1024)
-#define BLKFIN_DSUPBANKS 1
+#define BFIN_DCACHESIZE (16*1024)
+#define BFIN_DSUPBANKS 1
#else
#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x4000 - 0x4000)
#define L1_DATA_B_LENGTH (0x4000 - 0x4000)
-#define BLKFIN_DCACHESIZE (32*1024)
-#define BLKFIN_DSUPBANKS 2
+#define BFIN_DCACHESIZE (32*1024)
+#define BFIN_DSUPBANKS 2
#endif
#else
#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH 0x4000
#define L1_DATA_B_LENGTH 0x4000
-#define BLKFIN_DCACHESIZE (0*1024)
-#define BLKFIN_DSUPBANKS 0
-#endif /*CONFIG_BLKFIN_DCACHE*/
+#define BFIN_DCACHESIZE (0*1024)
+#define BFIN_DSUPBANKS 0
+#endif /*CONFIG_BFIN_DCACHE*/
#endif
@@ -138,30 +138,30 @@
#define L1_CODE_LENGTH 0xC000
-#ifdef CONFIG_BLKFIN_DCACHE
+#ifdef CONFIG_BFIN_DCACHE
-#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#ifdef CONFIG_BFIN_DCACHE_BANKA
#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
#define L1_DATA_B_LENGTH 0x8000
-#define BLKFIN_DCACHESIZE (16*1024)
-#define BLKFIN_DSUPBANKS 1
+#define BFIN_DCACHESIZE (16*1024)
+#define BFIN_DSUPBANKS 1
#else
#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
#define L1_DATA_B_LENGTH (0x8000 - 0x4000)
-#define BLKFIN_DCACHESIZE (32*1024)
-#define BLKFIN_DSUPBANKS 2
+#define BFIN_DCACHESIZE (32*1024)
+#define BFIN_DSUPBANKS 2
#endif
#else
#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH 0x8000
#define L1_DATA_B_LENGTH 0x8000
-#define BLKFIN_DCACHESIZE (0*1024)
-#define BLKFIN_DSUPBANKS 0
-#endif /*CONFIG_BLKFIN_DCACHE*/
+#define BFIN_DCACHESIZE (0*1024)
+#define BFIN_DSUPBANKS 0
+#endif /*CONFIG_BFIN_DCACHE*/
#endif
diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/include/asm-blackfin/mach-bf537/portmux.h
index ae6c53b2845..5a3f7d3bf73 100644
--- a/include/asm-blackfin/mach-bf537/portmux.h
+++ b/include/asm-blackfin/mach-bf537/portmux.h
@@ -99,7 +99,7 @@
#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(PORT_PJ8) | P_FUNCT(0))
#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(PORT_PJ9) | P_FUNCT(0))
#define P_SPORT0_TFS (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(0))
-#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
+#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(0))
#define P_CAN0_RX (P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(1))
#define P_CAN0_TX (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(1))
#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(1))
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index aca1d4ba145..c5b63759cde 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -1,74 +1,85 @@
-
/*
- * File: include/asm-blackfin/mach-bf548/anomaly.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * File: include/asm-blackfin/mach-bf548/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* This file shoule be up to date with:
+ * - Revision C, July 16, 2007; ADSP-BF549 Silicon Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
- slot1 and store of a P register in slot 2 is not
- supported */
-#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
- Channel DMA stops */
-#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
- registers. */
-#define ANOMALY_05000245 /* Spurious Hardware Error from an Access in the
- Shadow of a Conditional Branch */
-#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
- interrupt not functional */
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
- SPORT external receive and transmit clocks. */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
- VDDint <=0.9V */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
- not restored */
-#define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the
- Boundary of Reserved Memory */
-#define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and
- LC Registers Are Interrupted */
-#define ANOMALY_05000324 /* TWI Slave Boot Mode Is Not Functional */
-#define ANOMALY_05000325 /* External FIFO Boot Mode Is Not Functional */
-#define ANOMALY_05000327 /* Data Lost When Core and DMA Accesses Are Made to
- the USB FIFO Simultaneously */
-#define ANOMALY_05000328 /* Incorrect Access of OTP_STATUS During otp_write()
- function */
-#define ANOMALY_05000329 /* Synchronous Burst Flash Boot Mode Is Not Functional
- */
-#define ANOMALY_05000330 /* Host DMA Boot Mode Is Not Functional */
-#define ANOMALY_05000334 /* Inadequate Timing Margins on DDR DQS to DQ and DQM
- Skew */
-#define ANOMALY_05000335 /* Inadequate Rotary Debounce Logic Duration */
-#define ANOMALY_05000336 /* Phantom Interrupt Occurs After First Configuration
- of Host DMA Port */
-#define ANOMALY_05000337 /* Disallowed Configuration Prevents Subsequent
- Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000338 /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
-#endif /* _MACH_ANOMALY_H_ */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* False Hardware Error Exception when ISR context is not restored */
+#define ANOMALY_05000281 (1)
+/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
+#define ANOMALY_05000304 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* TWI Slave Boot Mode Is Not Functional */
+#define ANOMALY_05000324 (1)
+/* External FIFO Boot Mode Is Not Functional */
+#define ANOMALY_05000325 (1)
+/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
+#define ANOMALY_05000327 (1)
+/* Incorrect Access of OTP_STATUS During otp_write() Function */
+#define ANOMALY_05000328 (1)
+/* Synchronous Burst Flash Boot Mode Is Not Functional */
+#define ANOMALY_05000329 (1)
+/* Host DMA Boot Mode Is Not Functional */
+#define ANOMALY_05000330 (1)
+/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
+#define ANOMALY_05000334 (1)
+/* Inadequate Rotary Debounce Logic Duration */
+#define ANOMALY_05000335 (1)
+/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */
+#define ANOMALY_05000336 (1)
+/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
+#define ANOMALY_05000337 (1)
+/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
+#define ANOMALY_05000338 (1)
+/* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */
+#define ANOMALY_05000340 (1)
+/* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */
+#define ANOMALY_05000344 (1)
+/* USB Calibration Value Is Not Intialized */
+#define ANOMALY_05000346 (1)
+/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
+#define ANOMALY_05000347 (1)
+/* Data Lost when Core Reads SDH Data FIFO */
+#define ANOMALY_05000349 (1)
+/* PLL Status Register Is Inaccurate */
+#define ANOMALY_05000351 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000244 (0)
+#define ANOMALY_05000261 (0)
+#define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000323 (0)
+
+#endif
diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/include/asm-blackfin/mach-bf548/bf548.h
index 9498313a2cb..7e6d349beb0 100644
--- a/include/asm-blackfin/mach-bf548/bf548.h
+++ b/include/asm-blackfin/mach-bf548/bf548.h
@@ -52,12 +52,12 @@
/***************************/
-#define BLKFIN_DSUBBANKS 4
-#define BLKFIN_DWAYS 2
-#define BLKFIN_DLINES 64
-#define BLKFIN_ISUBBANKS 4
-#define BLKFIN_IWAYS 4
-#define BLKFIN_ILINES 32
+#define BFIN_DSUBBANKS 4
+#define BFIN_DWAYS 2
+#define BFIN_DLINES 64
+#define BFIN_ISUBBANKS 4
+#define BFIN_IWAYS 4
+#define BFIN_ILINES 32
#define WAY0_L 0x1
#define WAY1_L 0x2
@@ -106,93 +106,6 @@
#define AMGCTLVAL (V_AMBEN | V_AMCKEN)
-#define MAX_VC 650000000
-#define MIN_VC 50000000
-
-/********************************PLL Settings **************************************/
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#if (CONFIG_VCO_MULT < 0)
-#error "VCO Multiplier is less than 0. Please select a different value"
-#endif
-
-#if (CONFIG_VCO_MULT == 0)
-#error "VCO Multiplier should be greater than 0. Please select a different value"
-#endif
-
-#if (CONFIG_VCO_MULT > 64)
-#error "VCO Multiplier is more than 64. Please select a different value"
-#endif
-
-#ifndef CONFIG_CLKIN_HALF
-#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
-#else
-#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
-#endif
-
-#ifndef CONFIG_PLL_BYPASS
-#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
-#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
-#else
-#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
-#endif
-
-#if (CONFIG_SCLK_DIV < 1)
-#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
-#endif
-
-#if (CONFIG_SCLK_DIV > 15)
-#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
-#endif
-
-#if (CONFIG_CCLK_DIV != 1)
-#if (CONFIG_CCLK_DIV != 2)
-#if (CONFIG_CCLK_DIV != 4)
-#if (CONFIG_CCLK_DIV != 8)
-#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value"
-#endif
-#endif
-#endif
-#endif
-
-#if (CONFIG_VCO_HZ > MAX_VC)
-#error "VCO selected is more than maximum value. Please change the VCO multipler"
-#endif
-
-#if (CONFIG_SCLK_HZ > 133000000)
-#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
-#endif
-
-#if (CONFIG_SCLK_HZ < 27000000)
-#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
-#endif
-
-#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ)
-#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ)
-#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
-#error "Please select sclk less than cclk"
-#endif
-#endif
-#endif
-
-#if (CONFIG_CCLK_DIV == 1)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV1
-#endif
-#if (CONFIG_CCLK_DIV == 2)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV2
-#endif
-#if (CONFIG_CCLK_DIV == 4)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV4
-#endif
-#if (CONFIG_CCLK_DIV == 8)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV8
-#endif
-#ifndef CONFIG_CCLK_ACT_DIV
-#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
-#endif
-
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-
#ifdef CONFIG_BF542
#define CPU "BF542"
#define CPUID 0x027c8000
@@ -213,59 +126,4 @@
#define CPUID 0x0
#endif
-#if (CONFIG_MEM_SIZE % 4)
-#error "SDRAM mem size must be multible of 4MB"
-#endif
-
-#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
-#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK)
-#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID)
-
-/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
-
-#define ANOMALY_05000158_WORKAROUND 0x200
-#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */
-#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \
- | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
-#else /*Write Through */
-#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW \
- | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
-#endif
-
-
-#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY )
-#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
-#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
-#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY )
-
-#define SIZE_1K 0x00000400 /* 1K */
-#define SIZE_4K 0x00001000 /* 4K */
-#define SIZE_1M 0x00100000 /* 1M */
-#define SIZE_4M 0x00400000 /* 4M */
-
-#define MAX_CPLBS (16 * 2)
-
-/*
-* Number of required data CPLB switchtable entries
-* MEMSIZE / 4 (we mostly install 4M page size CPLBs
-* approx 16 for smaller 1MB page size CPLBs for allignment purposes
-* 1 for L1 Data Memory
-* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
-* 1 for ASYNC Memory
-*/
-
-
-#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2)
-
-/*
-* Number of required instruction CPLB switchtable entries
-* MEMSIZE / 4 (we mostly install 4M page size CPLBs
-* approx 12 for smaller 1MB page size CPLBs for allignment purposes
-* 1 for L1 Instruction Memory
-* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
-*/
-
-#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2)
-
#endif /* __MACH_BF48_H__ */
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 2f4afc90db1..f21a1620e6b 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -1,5 +1,6 @@
#include <linux/serial.h>
#include <asm/dma.h>
+#include <asm/portmux.h>
#define NR_PORTS 4
@@ -143,50 +144,48 @@ struct bfin_serial_res bfin_serial_resource[] = {
int nr_ports = ARRAY_SIZE(bfin_serial_resource);
+#define DRIVER_NAME "bfin-uart"
+
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
#ifdef CONFIG_SERIAL_BFIN_UART0
- /* Enable UART0 RX and TX on pin 7 & 8 of PORT E */
- bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER());
- bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX());
+ peripheral_request(P_UART0_TX, DRIVER_NAME);
+ peripheral_request(P_UART0_RX, DRIVER_NAME);
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
- /* Enable UART1 RX and TX on pin 0 & 1 of PORT H */
- bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER());
- bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX());
+ peripheral_request(P_UART1_TX, DRIVER_NAME);
+ peripheral_request(P_UART1_RX, DRIVER_NAME);
+
#ifdef CONFIG_BFIN_UART1_CTSRTS
- /* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */
- bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER());
- bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX());
+ peripheral_request(P_UART1_RTS, DRIVER_NAME);
+ peripheral_request(P_UART1_CTS DRIVER_NAME);
#endif
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
- /* Enable UART2 RX and TX on pin 4 & 5 of PORT B */
- bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER());
- bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX());
+ peripheral_request(P_UART2_TX, DRIVER_NAME);
+ peripheral_request(P_UART2_RX, DRIVER_NAME);
#endif
#ifdef CONFIG_SERIAL_BFIN_UART3
- /* Enable UART3 RX and TX on pin 6 & 7 of PORT B */
- bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER());
- bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX());
+ peripheral_request(P_UART3_TX, DRIVER_NAME);
+ peripheral_request(P_UART3_RX, DRIVER_NAME);
+
#ifdef CONFIG_BFIN_UART3_CTSRTS
- /* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */
- bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER());
- bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX());
+ peripheral_request(P_UART3_RTS, DRIVER_NAME);
+ peripheral_request(P_UART3_CTS DRIVER_NAME);
#endif
#endif
SSYNC();
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
- gpio_request(uart->cts_pin, NULL);
+ gpio_request(uart->cts_pin, DRIVER_NAME);
gpio_direction_input(uart->cts_pin);
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, NULL);
+ gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_output(uart->rts_pin);
}
#endif
diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h
index 791218fe7d9..19e84dd4c99 100644
--- a/include/asm-blackfin/mach-bf548/blackfin.h
+++ b/include/asm-blackfin/mach-bf548/blackfin.h
@@ -54,7 +54,7 @@
#include "defBF549.h"
#endif
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
#ifdef CONFIG_BF542
#include "cdefBF542.h"
#endif
diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
index cdf29e75ea5..aefab3f618c 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
@@ -31,6 +31,8 @@
#ifndef _CDEF_BF54X_H
#define _CDEF_BF54X_H
+#include <asm/blackfin.h>
+
#include "defBF54x_base.h"
#include <asm/system.h>
@@ -60,7 +62,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
bfin_write32(SIC_IWR2, 0);
bfin_write16(VR_CTL, val);
- __builtin_bfin_ssync();
+ SSYNC();
local_irq_save(flags);
asm("IDLE;");
diff --git a/include/asm-blackfin/mach-bf548/defBF544.h b/include/asm-blackfin/mach-bf548/defBF544.h
index dd955dcd39b..760307e34b9 100644
--- a/include/asm-blackfin/mach-bf548/defBF544.h
+++ b/include/asm-blackfin/mach-bf548/defBF544.h
@@ -81,6 +81,7 @@
/* Two Wire Interface Registers (TWI1) */
+#define TWI1_REGBASE 0xffc02200
#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */
#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */
#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */
diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h
index 8d4214e0807..70af33c963b 100644
--- a/include/asm-blackfin/mach-bf548/defBF548.h
+++ b/include/asm-blackfin/mach-bf548/defBF548.h
@@ -120,6 +120,7 @@
/* Two Wire Interface Registers (TWI1) */
+#define TWI1_REGBASE 0xffc02200
#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */
#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */
#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */
@@ -139,6 +140,7 @@
/* SPI2 Registers */
+#define SPI2_REGBASE 0xffc02400
#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */
#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */
#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */
diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/include/asm-blackfin/mach-bf548/defBF549.h
index c2f4734da48..50b3fe55ef0 100644
--- a/include/asm-blackfin/mach-bf548/defBF549.h
+++ b/include/asm-blackfin/mach-bf548/defBF549.h
@@ -121,6 +121,7 @@
/* Two Wire Interface Registers (TWI1) */
+#define TWI1_REGBASE 0xffc02200
#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */
#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */
#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */
@@ -140,6 +141,7 @@
/* SPI2 Registers */
+#define SPI2_REGBASE 0xffc02400
#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */
#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */
#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index 895ddd40a83..e2632db74ba 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -109,6 +109,7 @@
/* SPI0 Registers */
+#define SPI0_REGBASE 0xffc00500
#define SPI0_CTL 0xffc00500 /* SPI0 Control Register */
#define SPI0_FLG 0xffc00504 /* SPI0 Flag Register */
#define SPI0_STAT 0xffc00508 /* SPI0 Status Register */
@@ -121,6 +122,7 @@
/* Two Wire Interface Registers (TWI0) */
+#define TWI0_REGBASE 0xffc00700
#define TWI0_CLKDIV 0xffc00700 /* Clock Divider Register */
#define TWI0_CONTROL 0xffc00704 /* TWI Control Register */
#define TWI0_SLAVE_CTRL 0xffc00708 /* TWI Slave Mode Control Register */
@@ -978,6 +980,7 @@
/* SPI1 Registers */
+#define SPI1_REGBASE 0xffc02300
#define SPI1_CTL 0xffc02300 /* SPI1 Control Register */
#define SPI1_FLG 0xffc02304 /* SPI1 Flag Register */
#define SPI1_STAT 0xffc02308 /* SPI1 Status Register */
diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/include/asm-blackfin/mach-bf548/gpio.h
index dbf66bcabe3..cb8b0f15c9a 100644
--- a/include/asm-blackfin/mach-bf548/gpio.h
+++ b/include/asm-blackfin/mach-bf548/gpio.h
@@ -209,8 +209,3 @@ struct gpio_port_t {
unsigned short dummy7;
unsigned int port_mux;
};
-
-int gpio_request(unsigned short gpio, const char *label);
-void peripheral_free(unsigned short per);
-int peripheral_request_list(unsigned short per[], const char *label);
-void peripheral_free_list(unsigned short per[]);
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h
index e548d3cd81e..3b08cf9bd6f 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/include/asm-blackfin/mach-bf548/irq.h
@@ -55,287 +55,288 @@ Events (highest priority) EMU 0
/* The ABSTRACT IRQ definitions */
/** the first seven of the following are fixed, the rest you change if you need to **/
-#define IRQ_EMU 0 /* Emulation */
-#define IRQ_RST 1 /* reset */
-#define IRQ_NMI 2 /* Non Maskable */
-#define IRQ_EVX 3 /* Exception */
-#define IRQ_UNUSED 4 /* - unused interrupt*/
-#define IRQ_HWERR 5 /* Hardware Error */
-#define IRQ_CORETMR 6 /* Core timer */
-
-#define BFIN_IRQ(x) ((x) + 7)
-
-#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */
-#define IRQ_DMAC0_ERR BFIN_IRQ(1) /* DMAC0 Status Interrupt */
-#define IRQ_EPPI0_ERR BFIN_IRQ(2) /* EPPI0 Error Interrupt */
-#define IRQ_SPORT0_ERR BFIN_IRQ(3) /* SPORT0 Error Interrupt */
-#define IRQ_SPORT1_ERR BFIN_IRQ(4) /* SPORT1 Error Interrupt */
-#define IRQ_SPI0_ERR BFIN_IRQ(5) /* SPI0 Status(Error) Interrupt */
-#define IRQ_UART0_ERR BFIN_IRQ(6) /* UART0 Status(Error) Interrupt */
-#define IRQ_RTC BFIN_IRQ(7) /* RTC Interrupt */
-#define IRQ_EPPI0 BFIN_IRQ(8) /* EPPI0 Interrupt (DMA12) */
-#define IRQ_SPORT0_RX BFIN_IRQ(9) /* SPORT0 RX Interrupt (DMA0) */
-#define IRQ_SPORT0_TX BFIN_IRQ(10) /* SPORT0 TX Interrupt (DMA1) */
-#define IRQ_SPORT1_RX BFIN_IRQ(11) /* SPORT1 RX Interrupt (DMA2) */
-#define IRQ_SPORT1_TX BFIN_IRQ(12) /* SPORT1 TX Interrupt (DMA3) */
-#define IRQ_SPI0 BFIN_IRQ(13) /* SPI0 Interrupt (DMA4) */
-#define IRQ_UART0_RX BFIN_IRQ(14) /* UART0 RX Interrupt (DMA6) */
-#define IRQ_UART0_TX BFIN_IRQ(15) /* UART0 TX Interrupt (DMA7) */
-#define IRQ_TIMER8 BFIN_IRQ(16) /* TIMER 8 Interrupt */
-#define IRQ_TIMER9 BFIN_IRQ(17) /* TIMER 9 Interrupt */
-#define IRQ_TIMER10 BFIN_IRQ(18) /* TIMER 10 Interrupt */
-#define IRQ_PINT0 BFIN_IRQ(19) /* PINT0 Interrupt */
-#define IRQ_PINT1 BFIN_IRQ(20) /* PINT1 Interrupt */
-#define IRQ_MDMAS0 BFIN_IRQ(21) /* MDMA Stream 0 Interrupt */
-#define IRQ_MDMAS1 BFIN_IRQ(22) /* MDMA Stream 1 Interrupt */
-#define IRQ_WATCHDOG BFIN_IRQ(23) /* Watchdog Interrupt */
-#define IRQ_DMAC1_ERR BFIN_IRQ(24) /* DMAC1 Status (Error) Interrupt */
-#define IRQ_SPORT2_ERR BFIN_IRQ(25) /* SPORT2 Error Interrupt */
-#define IRQ_SPORT3_ERR BFIN_IRQ(26) /* SPORT3 Error Interrupt */
-#define IRQ_MXVR_DATA BFIN_IRQ(27) /* MXVR Data Interrupt */
-#define IRQ_SPI1_ERR BFIN_IRQ(28) /* SPI1 Status (Error) Interrupt */
-#define IRQ_SPI2_ERR BFIN_IRQ(29) /* SPI2 Status (Error) Interrupt */
-#define IRQ_UART1_ERR BFIN_IRQ(30) /* UART1 Status (Error) Interrupt */
-#define IRQ_UART2_ERR BFIN_IRQ(31) /* UART2 Status (Error) Interrupt */
-#define IRQ_CAN0_ERR BFIN_IRQ(32) /* CAN0 Status (Error) Interrupt */
-#define IRQ_SPORT2_RX BFIN_IRQ(33) /* SPORT2 RX (DMA18) Interrupt */
-#define IRQ_SPORT2_TX BFIN_IRQ(34) /* SPORT2 TX (DMA19) Interrupt */
-#define IRQ_SPORT3_RX BFIN_IRQ(35) /* SPORT3 RX (DMA20) Interrupt */
-#define IRQ_SPORT3_TX BFIN_IRQ(36) /* SPORT3 TX (DMA21) Interrupt */
-#define IRQ_EPPI1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */
-#define IRQ_EPPI2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */
-#define IRQ_SPI1 BFIN_IRQ(39) /* SPI1 (DMA5) Interrupt */
-#define IRQ_SPI2 BFIN_IRQ(40) /* SPI2 (DMA23) Interrupt */
-#define IRQ_UART1_RX BFIN_IRQ(41) /* UART1 RX (DMA8) Interrupt */
-#define IRQ_UART1_TX BFIN_IRQ(42) /* UART1 TX (DMA9) Interrupt */
-#define IRQ_ATAPI_RX BFIN_IRQ(43) /* ATAPI RX (DMA10) Interrupt */
-#define IRQ_ATAPI_TX BFIN_IRQ(44) /* ATAPI TX (DMA11) Interrupt */
-#define IRQ_TWI0 BFIN_IRQ(45) /* TWI0 Interrupt */
-#define IRQ_TWI1 BFIN_IRQ(46) /* TWI1 Interrupt */
-#define IRQ_TWI IRQ_TWI0 /* TWI Interrupt */
-#define IRQ_CAN0_RX BFIN_IRQ(47) /* CAN0 Receive Interrupt */
-#define IRQ_CAN0_TX BFIN_IRQ(48) /* CAN0 Transmit Interrupt */
-#define IRQ_MDMAS2 BFIN_IRQ(49) /* MDMA Stream 2 Interrupt */
-#define IRQ_MDMAS3 BFIN_IRQ(50) /* MDMA Stream 3 Interrupt */
-#define IRQ_MXVR_ERR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */
-#define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */
-#define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */
-#define IRQ_EPP1_ERR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
-#define IRQ_EPP2_ERR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
-#define IRQ_UART3_ERR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */
-#define IRQ_HOST_ERR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */
-#define IRQ_PIXC_ERR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */
-#define IRQ_NFC_ERR BFIN_IRQ(60) /* NFC Error Interrupt */
-#define IRQ_ATAPI_ERR BFIN_IRQ(61) /* ATAPI Error Interrupt */
-#define IRQ_CAN1_ERR BFIN_IRQ(62) /* CAN1 Status (Error) Interrupt */
-#define IRQ_HS_DMA_ERR BFIN_IRQ(63) /* Handshake DMA Status Interrupt */
-#define IRQ_PIXC_IN0 BFIN_IRQ(64) /* PIXC IN0 (DMA15) Interrupt */
-#define IRQ_PIXC_IN1 BFIN_IRQ(65) /* PIXC IN1 (DMA16) Interrupt */
-#define IRQ_PIXC_OUT BFIN_IRQ(66) /* PIXC OUT (DMA17) Interrupt */
-#define IRQ_SDH BFIN_IRQ(67) /* SDH/NFC (DMA22) Interrupt */
-#define IRQ_CNT BFIN_IRQ(68) /* CNT Interrupt */
-#define IRQ_KEY BFIN_IRQ(69) /* KEY Interrupt */
-#define IRQ_CAN1_RX BFIN_IRQ(70) /* CAN1 RX Interrupt */
-#define IRQ_CAN1_TX BFIN_IRQ(71) /* CAN1 TX Interrupt */
-#define IRQ_SDH_MASK0 BFIN_IRQ(72) /* SDH Mask 0 Interrupt */
-#define IRQ_SDH_MASK1 BFIN_IRQ(73) /* SDH Mask 1 Interrupt */
-#define IRQ_USB_INT0 BFIN_IRQ(75) /* USB INT0 Interrupt */
-#define IRQ_USB_INT1 BFIN_IRQ(76) /* USB INT1 Interrupt */
-#define IRQ_USB_INT2 BFIN_IRQ(77) /* USB INT2 Interrupt */
-#define IRQ_USB_DMA BFIN_IRQ(78) /* USB DMA Interrupt */
-#define IRQ_OPTSEC BFIN_IRQ(79) /* OTPSEC Interrupt */
-#define IRQ_TIMER0 BFIN_IRQ(86) /* Timer 0 Interrupt */
-#define IRQ_TIMER1 BFIN_IRQ(87) /* Timer 1 Interrupt */
-#define IRQ_TIMER2 BFIN_IRQ(88) /* Timer 2 Interrupt */
-#define IRQ_TIMER3 BFIN_IRQ(89) /* Timer 3 Interrupt */
-#define IRQ_TIMER4 BFIN_IRQ(90) /* Timer 4 Interrupt */
-#define IRQ_TIMER5 BFIN_IRQ(91) /* Timer 5 Interrupt */
-#define IRQ_TIMER6 BFIN_IRQ(92) /* Timer 6 Interrupt */
-#define IRQ_TIMER7 BFIN_IRQ(93) /* Timer 7 Interrupt */
-#define IRQ_PINT2 BFIN_IRQ(94) /* PINT2 Interrupt */
-#define IRQ_PINT3 BFIN_IRQ(95) /* PINT3 Interrupt */
-
-#define SYS_IRQS IRQ_PINT3
-
-#define BFIN_PA_IRQ(x) ((x) + SYS_IRQS + 1)
-#define IRQ_PA0 BFIN_PA_IRQ(0)
-#define IRQ_PA1 BFIN_PA_IRQ(1)
-#define IRQ_PA2 BFIN_PA_IRQ(2)
-#define IRQ_PA3 BFIN_PA_IRQ(3)
-#define IRQ_PA4 BFIN_PA_IRQ(4)
-#define IRQ_PA5 BFIN_PA_IRQ(5)
-#define IRQ_PA6 BFIN_PA_IRQ(6)
-#define IRQ_PA7 BFIN_PA_IRQ(7)
-#define IRQ_PA8 BFIN_PA_IRQ(8)
-#define IRQ_PA9 BFIN_PA_IRQ(9)
-#define IRQ_PA10 BFIN_PA_IRQ(10)
-#define IRQ_PA11 BFIN_PA_IRQ(11)
-#define IRQ_PA12 BFIN_PA_IRQ(12)
-#define IRQ_PA13 BFIN_PA_IRQ(13)
-#define IRQ_PA14 BFIN_PA_IRQ(14)
-#define IRQ_PA15 BFIN_PA_IRQ(15)
-
-#define BFIN_PB_IRQ(x) ((x) + IRQ_PA15 + 1)
-#define IRQ_PB0 BFIN_PB_IRQ(0)
-#define IRQ_PB1 BFIN_PB_IRQ(1)
-#define IRQ_PB2 BFIN_PB_IRQ(2)
-#define IRQ_PB3 BFIN_PB_IRQ(3)
-#define IRQ_PB4 BFIN_PB_IRQ(4)
-#define IRQ_PB5 BFIN_PB_IRQ(5)
-#define IRQ_PB6 BFIN_PB_IRQ(6)
-#define IRQ_PB7 BFIN_PB_IRQ(7)
-#define IRQ_PB8 BFIN_PB_IRQ(8)
-#define IRQ_PB9 BFIN_PB_IRQ(9)
-#define IRQ_PB10 BFIN_PB_IRQ(10)
-#define IRQ_PB11 BFIN_PB_IRQ(11)
-#define IRQ_PB12 BFIN_PB_IRQ(12)
-#define IRQ_PB13 BFIN_PB_IRQ(13)
-#define IRQ_PB14 BFIN_PB_IRQ(14)
-#define IRQ_PB15 BFIN_PB_IRQ(15) /* N/A */
-
-#define BFIN_PC_IRQ(x) ((x) + IRQ_PB15 + 1)
-#define IRQ_PC0 BFIN_PC_IRQ(0)
-#define IRQ_PC1 BFIN_PC_IRQ(1)
-#define IRQ_PC2 BFIN_PC_IRQ(2)
-#define IRQ_PC3 BFIN_PC_IRQ(3)
-#define IRQ_PC4 BFIN_PC_IRQ(4)
-#define IRQ_PC5 BFIN_PC_IRQ(5)
-#define IRQ_PC6 BFIN_PC_IRQ(6)
-#define IRQ_PC7 BFIN_PC_IRQ(7)
-#define IRQ_PC8 BFIN_PC_IRQ(8)
-#define IRQ_PC9 BFIN_PC_IRQ(9)
-#define IRQ_PC10 BFIN_PC_IRQ(10)
-#define IRQ_PC11 BFIN_PC_IRQ(11)
-#define IRQ_PC12 BFIN_PC_IRQ(12)
-#define IRQ_PC13 BFIN_PC_IRQ(13)
-#define IRQ_PC14 BFIN_PC_IRQ(14) /* N/A */
-#define IRQ_PC15 BFIN_PC_IRQ(15) /* N/A */
-
-#define BFIN_PD_IRQ(x) ((x) + IRQ_PC15 + 1)
-#define IRQ_PD0 BFIN_PD_IRQ(0)
-#define IRQ_PD1 BFIN_PD_IRQ(1)
-#define IRQ_PD2 BFIN_PD_IRQ(2)
-#define IRQ_PD3 BFIN_PD_IRQ(3)
-#define IRQ_PD4 BFIN_PD_IRQ(4)
-#define IRQ_PD5 BFIN_PD_IRQ(5)
-#define IRQ_PD6 BFIN_PD_IRQ(6)
-#define IRQ_PD7 BFIN_PD_IRQ(7)
-#define IRQ_PD8 BFIN_PD_IRQ(8)
-#define IRQ_PD9 BFIN_PD_IRQ(9)
-#define IRQ_PD10 BFIN_PD_IRQ(10)
-#define IRQ_PD11 BFIN_PD_IRQ(11)
-#define IRQ_PD12 BFIN_PD_IRQ(12)
-#define IRQ_PD13 BFIN_PD_IRQ(13)
-#define IRQ_PD14 BFIN_PD_IRQ(14)
-#define IRQ_PD15 BFIN_PD_IRQ(15)
-
-#define BFIN_PE_IRQ(x) ((x) + IRQ_PD15 + 1)
-#define IRQ_PE0 BFIN_PE_IRQ(0)
-#define IRQ_PE1 BFIN_PE_IRQ(1)
-#define IRQ_PE2 BFIN_PE_IRQ(2)
-#define IRQ_PE3 BFIN_PE_IRQ(3)
-#define IRQ_PE4 BFIN_PE_IRQ(4)
-#define IRQ_PE5 BFIN_PE_IRQ(5)
-#define IRQ_PE6 BFIN_PE_IRQ(6)
-#define IRQ_PE7 BFIN_PE_IRQ(7)
-#define IRQ_PE8 BFIN_PE_IRQ(8)
-#define IRQ_PE9 BFIN_PE_IRQ(9)
-#define IRQ_PE10 BFIN_PE_IRQ(10)
-#define IRQ_PE11 BFIN_PE_IRQ(11)
-#define IRQ_PE12 BFIN_PE_IRQ(12)
-#define IRQ_PE13 BFIN_PE_IRQ(13)
-#define IRQ_PE14 BFIN_PE_IRQ(14)
-#define IRQ_PE15 BFIN_PE_IRQ(15)
-
-#define BFIN_PF_IRQ(x) ((x) + IRQ_PE15 + 1)
-#define IRQ_PF0 BFIN_PF_IRQ(0)
-#define IRQ_PF1 BFIN_PF_IRQ(1)
-#define IRQ_PF2 BFIN_PF_IRQ(2)
-#define IRQ_PF3 BFIN_PF_IRQ(3)
-#define IRQ_PF4 BFIN_PF_IRQ(4)
-#define IRQ_PF5 BFIN_PF_IRQ(5)
-#define IRQ_PF6 BFIN_PF_IRQ(6)
-#define IRQ_PF7 BFIN_PF_IRQ(7)
-#define IRQ_PF8 BFIN_PF_IRQ(8)
-#define IRQ_PF9 BFIN_PF_IRQ(9)
-#define IRQ_PF10 BFIN_PF_IRQ(10)
-#define IRQ_PF11 BFIN_PF_IRQ(11)
-#define IRQ_PF12 BFIN_PF_IRQ(12)
-#define IRQ_PF13 BFIN_PF_IRQ(13)
-#define IRQ_PF14 BFIN_PF_IRQ(14)
-#define IRQ_PF15 BFIN_PF_IRQ(15)
-
-#define BFIN_PG_IRQ(x) ((x) + IRQ_PF15 + 1)
-#define IRQ_PG0 BFIN_PG_IRQ(0)
-#define IRQ_PG1 BFIN_PG_IRQ(1)
-#define IRQ_PG2 BFIN_PG_IRQ(2)
-#define IRQ_PG3 BFIN_PG_IRQ(3)
-#define IRQ_PG4 BFIN_PG_IRQ(4)
-#define IRQ_PG5 BFIN_PG_IRQ(5)
-#define IRQ_PG6 BFIN_PG_IRQ(6)
-#define IRQ_PG7 BFIN_PG_IRQ(7)
-#define IRQ_PG8 BFIN_PG_IRQ(8)
-#define IRQ_PG9 BFIN_PG_IRQ(9)
-#define IRQ_PG10 BFIN_PG_IRQ(10)
-#define IRQ_PG11 BFIN_PG_IRQ(11)
-#define IRQ_PG12 BFIN_PG_IRQ(12)
-#define IRQ_PG13 BFIN_PG_IRQ(13)
-#define IRQ_PG14 BFIN_PG_IRQ(14)
-#define IRQ_PG15 BFIN_PG_IRQ(15)
-
-#define BFIN_PH_IRQ(x) ((x) + IRQ_PG15 + 1)
-#define IRQ_PH0 BFIN_PH_IRQ(0)
-#define IRQ_PH1 BFIN_PH_IRQ(1)
-#define IRQ_PH2 BFIN_PH_IRQ(2)
-#define IRQ_PH3 BFIN_PH_IRQ(3)
-#define IRQ_PH4 BFIN_PH_IRQ(4)
-#define IRQ_PH5 BFIN_PH_IRQ(5)
-#define IRQ_PH6 BFIN_PH_IRQ(6)
-#define IRQ_PH7 BFIN_PH_IRQ(7)
-#define IRQ_PH8 BFIN_PH_IRQ(8)
-#define IRQ_PH9 BFIN_PH_IRQ(9)
-#define IRQ_PH10 BFIN_PH_IRQ(10)
-#define IRQ_PH11 BFIN_PH_IRQ(11)
-#define IRQ_PH12 BFIN_PH_IRQ(12)
-#define IRQ_PH13 BFIN_PH_IRQ(13)
-#define IRQ_PH14 BFIN_PH_IRQ(14) /* N/A */
-#define IRQ_PH15 BFIN_PH_IRQ(15) /* N/A */
-
-#define BFIN_PI_IRQ(x) ((x) + IRQ_PH15 + 1)
-#define IRQ_PI0 BFIN_PI_IRQ(0)
-#define IRQ_PI1 BFIN_PI_IRQ(1)
-#define IRQ_PI2 BFIN_PI_IRQ(2)
-#define IRQ_PI3 BFIN_PI_IRQ(3)
-#define IRQ_PI4 BFIN_PI_IRQ(4)
-#define IRQ_PI5 BFIN_PI_IRQ(5)
-#define IRQ_PI6 BFIN_PI_IRQ(6)
-#define IRQ_PI7 BFIN_PI_IRQ(7)
-#define IRQ_PI8 BFIN_PI_IRQ(8)
-#define IRQ_PI9 BFIN_PI_IRQ(9)
-#define IRQ_PI10 BFIN_PI_IRQ(10)
-#define IRQ_PI11 BFIN_PI_IRQ(11)
-#define IRQ_PI12 BFIN_PI_IRQ(12)
-#define IRQ_PI13 BFIN_PI_IRQ(13)
-#define IRQ_PI14 BFIN_PI_IRQ(14)
-#define IRQ_PI15 BFIN_PI_IRQ(15)
-
-#define BFIN_PJ_IRQ(x) ((x) + IRQ_PI15 + 1)
-#define IRQ_PJ0 BFIN_PJ_IRQ(0)
-#define IRQ_PJ1 BFIN_PJ_IRQ(1)
-#define IRQ_PJ2 BFIN_PJ_IRQ(2)
-#define IRQ_PJ3 BFIN_PJ_IRQ(3)
-#define IRQ_PJ4 BFIN_PJ_IRQ(4)
-#define IRQ_PJ5 BFIN_PJ_IRQ(5)
-#define IRQ_PJ6 BFIN_PJ_IRQ(6)
-#define IRQ_PJ7 BFIN_PJ_IRQ(7)
-#define IRQ_PJ8 BFIN_PJ_IRQ(8)
-#define IRQ_PJ9 BFIN_PJ_IRQ(9)
-#define IRQ_PJ10 BFIN_PJ_IRQ(10)
-#define IRQ_PJ11 BFIN_PJ_IRQ(11)
-#define IRQ_PJ12 BFIN_PJ_IRQ(12)
-#define IRQ_PJ13 BFIN_PJ_IRQ(13)
-#define IRQ_PJ14 BFIN_PJ_IRQ(14) /* N/A */
-#define IRQ_PJ15 BFIN_PJ_IRQ(15) /* N/A */
+#define IRQ_EMU 0 /* Emulation */
+#define IRQ_RST 1 /* reset */
+#define IRQ_NMI 2 /* Non Maskable */
+#define IRQ_EVX 3 /* Exception */
+#define IRQ_UNUSED 4 /* - unused interrupt*/
+#define IRQ_HWERR 5 /* Hardware Error */
+#define IRQ_CORETMR 6 /* Core timer */
+
+#define BFIN_IRQ(x) ((x) + 7)
+
+#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */
+#define IRQ_DMAC0_ERROR BFIN_IRQ(1) /* DMAC0 Status Interrupt */
+#define IRQ_EPPI0_ERROR BFIN_IRQ(2) /* EPPI0 Error Interrupt */
+#define IRQ_SPORT0_ERROR BFIN_IRQ(3) /* SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR BFIN_IRQ(4) /* SPORT1 Error Interrupt */
+#define IRQ_SPI0_ERROR BFIN_IRQ(5) /* SPI0 Status(Error) Interrupt */
+#define IRQ_UART0_ERROR BFIN_IRQ(6) /* UART0 Status(Error) Interrupt */
+#define IRQ_RTC BFIN_IRQ(7) /* RTC Interrupt */
+#define IRQ_EPPI0 BFIN_IRQ(8) /* EPPI0 Interrupt (DMA12) */
+#define IRQ_SPORT0_RX BFIN_IRQ(9) /* SPORT0 RX Interrupt (DMA0) */
+#define IRQ_SPORT0_TX BFIN_IRQ(10) /* SPORT0 TX Interrupt (DMA1) */
+#define IRQ_SPORT1_RX BFIN_IRQ(11) /* SPORT1 RX Interrupt (DMA2) */
+#define IRQ_SPORT1_TX BFIN_IRQ(12) /* SPORT1 TX Interrupt (DMA3) */
+#define IRQ_SPI0 BFIN_IRQ(13) /* SPI0 Interrupt (DMA4) */
+#define IRQ_UART0_RX BFIN_IRQ(14) /* UART0 RX Interrupt (DMA6) */
+#define IRQ_UART0_TX BFIN_IRQ(15) /* UART0 TX Interrupt (DMA7) */
+#define IRQ_TIMER8 BFIN_IRQ(16) /* TIMER 8 Interrupt */
+#define IRQ_TIMER9 BFIN_IRQ(17) /* TIMER 9 Interrupt */
+#define IRQ_TIMER10 BFIN_IRQ(18) /* TIMER 10 Interrupt */
+#define IRQ_PINT0 BFIN_IRQ(19) /* PINT0 Interrupt */
+#define IRQ_PINT1 BFIN_IRQ(20) /* PINT1 Interrupt */
+#define IRQ_MDMAS0 BFIN_IRQ(21) /* MDMA Stream 0 Interrupt */
+#define IRQ_MDMAS1 BFIN_IRQ(22) /* MDMA Stream 1 Interrupt */
+#define IRQ_WATCHDOG BFIN_IRQ(23) /* Watchdog Interrupt */
+#define IRQ_DMAC1_ERROR BFIN_IRQ(24) /* DMAC1 Status (Error) Interrupt */
+#define IRQ_SPORT2_ERROR BFIN_IRQ(25) /* SPORT2 Error Interrupt */
+#define IRQ_SPORT3_ERROR BFIN_IRQ(26) /* SPORT3 Error Interrupt */
+#define IRQ_MXVR_DATA BFIN_IRQ(27) /* MXVR Data Interrupt */
+#define IRQ_SPI1_ERROR BFIN_IRQ(28) /* SPI1 Status (Error) Interrupt */
+#define IRQ_SPI2_ERROR BFIN_IRQ(29) /* SPI2 Status (Error) Interrupt */
+#define IRQ_UART1_ERROR BFIN_IRQ(30) /* UART1 Status (Error) Interrupt */
+#define IRQ_UART2_ERROR BFIN_IRQ(31) /* UART2 Status (Error) Interrupt */
+#define IRQ_CAN0_ERROR BFIN_IRQ(32) /* CAN0 Status (Error) Interrupt */
+#define IRQ_SPORT2_RX BFIN_IRQ(33) /* SPORT2 RX (DMA18) Interrupt */
+#define IRQ_SPORT2_TX BFIN_IRQ(34) /* SPORT2 TX (DMA19) Interrupt */
+#define IRQ_SPORT3_RX BFIN_IRQ(35) /* SPORT3 RX (DMA20) Interrupt */
+#define IRQ_SPORT3_TX BFIN_IRQ(36) /* SPORT3 TX (DMA21) Interrupt */
+#define IRQ_EPPI1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */
+#define IRQ_EPPI2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */
+#define IRQ_SPI1 BFIN_IRQ(39) /* SPI1 (DMA5) Interrupt */
+#define IRQ_SPI2 BFIN_IRQ(40) /* SPI2 (DMA23) Interrupt */
+#define IRQ_UART1_RX BFIN_IRQ(41) /* UART1 RX (DMA8) Interrupt */
+#define IRQ_UART1_TX BFIN_IRQ(42) /* UART1 TX (DMA9) Interrupt */
+#define IRQ_ATAPI_RX BFIN_IRQ(43) /* ATAPI RX (DMA10) Interrupt */
+#define IRQ_ATAPI_TX BFIN_IRQ(44) /* ATAPI TX (DMA11) Interrupt */
+#define IRQ_TWI0 BFIN_IRQ(45) /* TWI0 Interrupt */
+#define IRQ_TWI1 BFIN_IRQ(46) /* TWI1 Interrupt */
+#define IRQ_CAN0_RX BFIN_IRQ(47) /* CAN0 Receive Interrupt */
+#define IRQ_CAN0_TX BFIN_IRQ(48) /* CAN0 Transmit Interrupt */
+#define IRQ_MDMAS2 BFIN_IRQ(49) /* MDMA Stream 2 Interrupt */
+#define IRQ_MDMAS3 BFIN_IRQ(50) /* MDMA Stream 3 Interrupt */
+#define IRQ_MXVR_ERROR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */
+#define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */
+#define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */
+#define IRQ_EPP1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
+#define IRQ_EPP2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
+#define IRQ_UART3_ERROR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */
+#define IRQ_HOST_ERROR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */
+#define IRQ_PIXC_ERROR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */
+#define IRQ_NFC_ERROR BFIN_IRQ(60) /* NFC Error Interrupt */
+#define IRQ_ATAPI_ERROR BFIN_IRQ(61) /* ATAPI Error Interrupt */
+#define IRQ_CAN1_ERROR BFIN_IRQ(62) /* CAN1 Status (Error) Interrupt */
+#define IRQ_HS_DMA_ERROR BFIN_IRQ(63) /* Handshake DMA Status Interrupt */
+#define IRQ_PIXC_IN0 BFIN_IRQ(64) /* PIXC IN0 (DMA15) Interrupt */
+#define IRQ_PIXC_IN1 BFIN_IRQ(65) /* PIXC IN1 (DMA16) Interrupt */
+#define IRQ_PIXC_OUT BFIN_IRQ(66) /* PIXC OUT (DMA17) Interrupt */
+#define IRQ_SDH BFIN_IRQ(67) /* SDH/NFC (DMA22) Interrupt */
+#define IRQ_CNT BFIN_IRQ(68) /* CNT Interrupt */
+#define IRQ_KEY BFIN_IRQ(69) /* KEY Interrupt */
+#define IRQ_CAN1_RX BFIN_IRQ(70) /* CAN1 RX Interrupt */
+#define IRQ_CAN1_TX BFIN_IRQ(71) /* CAN1 TX Interrupt */
+#define IRQ_SDH_MASK0 BFIN_IRQ(72) /* SDH Mask 0 Interrupt */
+#define IRQ_SDH_MASK1 BFIN_IRQ(73) /* SDH Mask 1 Interrupt */
+#define IRQ_USB_INT0 BFIN_IRQ(75) /* USB INT0 Interrupt */
+#define IRQ_USB_INT1 BFIN_IRQ(76) /* USB INT1 Interrupt */
+#define IRQ_USB_INT2 BFIN_IRQ(77) /* USB INT2 Interrupt */
+#define IRQ_USB_DMA BFIN_IRQ(78) /* USB DMA Interrupt */
+#define IRQ_OPTSEC BFIN_IRQ(79) /* OTPSEC Interrupt */
+#define IRQ_TIMER0 BFIN_IRQ(86) /* Timer 0 Interrupt */
+#define IRQ_TIMER1 BFIN_IRQ(87) /* Timer 1 Interrupt */
+#define IRQ_TIMER2 BFIN_IRQ(88) /* Timer 2 Interrupt */
+#define IRQ_TIMER3 BFIN_IRQ(89) /* Timer 3 Interrupt */
+#define IRQ_TIMER4 BFIN_IRQ(90) /* Timer 4 Interrupt */
+#define IRQ_TIMER5 BFIN_IRQ(91) /* Timer 5 Interrupt */
+#define IRQ_TIMER6 BFIN_IRQ(92) /* Timer 6 Interrupt */
+#define IRQ_TIMER7 BFIN_IRQ(93) /* Timer 7 Interrupt */
+#define IRQ_PINT2 BFIN_IRQ(94) /* PINT2 Interrupt */
+#define IRQ_PINT3 BFIN_IRQ(95) /* PINT3 Interrupt */
+
+#define SYS_IRQS IRQ_PINT3
+
+#define BFIN_PA_IRQ(x) ((x) + SYS_IRQS + 1)
+#define IRQ_PA0 BFIN_PA_IRQ(0)
+#define IRQ_PA1 BFIN_PA_IRQ(1)
+#define IRQ_PA2 BFIN_PA_IRQ(2)
+#define IRQ_PA3 BFIN_PA_IRQ(3)
+#define IRQ_PA4 BFIN_PA_IRQ(4)
+#define IRQ_PA5 BFIN_PA_IRQ(5)
+#define IRQ_PA6 BFIN_PA_IRQ(6)
+#define IRQ_PA7 BFIN_PA_IRQ(7)
+#define IRQ_PA8 BFIN_PA_IRQ(8)
+#define IRQ_PA9 BFIN_PA_IRQ(9)
+#define IRQ_PA10 BFIN_PA_IRQ(10)
+#define IRQ_PA11 BFIN_PA_IRQ(11)
+#define IRQ_PA12 BFIN_PA_IRQ(12)
+#define IRQ_PA13 BFIN_PA_IRQ(13)
+#define IRQ_PA14 BFIN_PA_IRQ(14)
+#define IRQ_PA15 BFIN_PA_IRQ(15)
+
+#define BFIN_PB_IRQ(x) ((x) + IRQ_PA15 + 1)
+#define IRQ_PB0 BFIN_PB_IRQ(0)
+#define IRQ_PB1 BFIN_PB_IRQ(1)
+#define IRQ_PB2 BFIN_PB_IRQ(2)
+#define IRQ_PB3 BFIN_PB_IRQ(3)
+#define IRQ_PB4 BFIN_PB_IRQ(4)
+#define IRQ_PB5 BFIN_PB_IRQ(5)
+#define IRQ_PB6 BFIN_PB_IRQ(6)
+#define IRQ_PB7 BFIN_PB_IRQ(7)
+#define IRQ_PB8 BFIN_PB_IRQ(8)
+#define IRQ_PB9 BFIN_PB_IRQ(9)
+#define IRQ_PB10 BFIN_PB_IRQ(10)
+#define IRQ_PB11 BFIN_PB_IRQ(11)
+#define IRQ_PB12 BFIN_PB_IRQ(12)
+#define IRQ_PB13 BFIN_PB_IRQ(13)
+#define IRQ_PB14 BFIN_PB_IRQ(14)
+#define IRQ_PB15 BFIN_PB_IRQ(15) /* N/A */
+
+#define BFIN_PC_IRQ(x) ((x) + IRQ_PB15 + 1)
+#define IRQ_PC0 BFIN_PC_IRQ(0)
+#define IRQ_PC1 BFIN_PC_IRQ(1)
+#define IRQ_PC2 BFIN_PC_IRQ(2)
+#define IRQ_PC3 BFIN_PC_IRQ(3)
+#define IRQ_PC4 BFIN_PC_IRQ(4)
+#define IRQ_PC5 BFIN_PC_IRQ(5)
+#define IRQ_PC6 BFIN_PC_IRQ(6)
+#define IRQ_PC7 BFIN_PC_IRQ(7)
+#define IRQ_PC8 BFIN_PC_IRQ(8)
+#define IRQ_PC9 BFIN_PC_IRQ(9)
+#define IRQ_PC10 BFIN_PC_IRQ(10)
+#define IRQ_PC11 BFIN_PC_IRQ(11)
+#define IRQ_PC12 BFIN_PC_IRQ(12)
+#define IRQ_PC13 BFIN_PC_IRQ(13)
+#define IRQ_PC14 BFIN_PC_IRQ(14) /* N/A */
+#define IRQ_PC15 BFIN_PC_IRQ(15) /* N/A */
+
+#define BFIN_PD_IRQ(x) ((x) + IRQ_PC15 + 1)
+#define IRQ_PD0 BFIN_PD_IRQ(0)
+#define IRQ_PD1 BFIN_PD_IRQ(1)
+#define IRQ_PD2 BFIN_PD_IRQ(2)
+#define IRQ_PD3 BFIN_PD_IRQ(3)
+#define IRQ_PD4 BFIN_PD_IRQ(4)
+#define IRQ_PD5 BFIN_PD_IRQ(5)
+#define IRQ_PD6 BFIN_PD_IRQ(6)
+#define IRQ_PD7 BFIN_PD_IRQ(7)
+#define IRQ_PD8 BFIN_PD_IRQ(8)
+#define IRQ_PD9 BFIN_PD_IRQ(9)
+#define IRQ_PD10 BFIN_PD_IRQ(10)
+#define IRQ_PD11 BFIN_PD_IRQ(11)
+#define IRQ_PD12 BFIN_PD_IRQ(12)
+#define IRQ_PD13 BFIN_PD_IRQ(13)
+#define IRQ_PD14 BFIN_PD_IRQ(14)
+#define IRQ_PD15 BFIN_PD_IRQ(15)
+
+#define BFIN_PE_IRQ(x) ((x) + IRQ_PD15 + 1)
+#define IRQ_PE0 BFIN_PE_IRQ(0)
+#define IRQ_PE1 BFIN_PE_IRQ(1)
+#define IRQ_PE2 BFIN_PE_IRQ(2)
+#define IRQ_PE3 BFIN_PE_IRQ(3)
+#define IRQ_PE4 BFIN_PE_IRQ(4)
+#define IRQ_PE5 BFIN_PE_IRQ(5)
+#define IRQ_PE6 BFIN_PE_IRQ(6)
+#define IRQ_PE7 BFIN_PE_IRQ(7)
+#define IRQ_PE8 BFIN_PE_IRQ(8)
+#define IRQ_PE9 BFIN_PE_IRQ(9)
+#define IRQ_PE10 BFIN_PE_IRQ(10)
+#define IRQ_PE11 BFIN_PE_IRQ(11)
+#define IRQ_PE12 BFIN_PE_IRQ(12)
+#define IRQ_PE13 BFIN_PE_IRQ(13)
+#define IRQ_PE14 BFIN_PE_IRQ(14)
+#define IRQ_PE15 BFIN_PE_IRQ(15)
+
+#define BFIN_PF_IRQ(x) ((x) + IRQ_PE15 + 1)
+#define IRQ_PF0 BFIN_PF_IRQ(0)
+#define IRQ_PF1 BFIN_PF_IRQ(1)
+#define IRQ_PF2 BFIN_PF_IRQ(2)
+#define IRQ_PF3 BFIN_PF_IRQ(3)
+#define IRQ_PF4 BFIN_PF_IRQ(4)
+#define IRQ_PF5 BFIN_PF_IRQ(5)
+#define IRQ_PF6 BFIN_PF_IRQ(6)
+#define IRQ_PF7 BFIN_PF_IRQ(7)
+#define IRQ_PF8 BFIN_PF_IRQ(8)
+#define IRQ_PF9 BFIN_PF_IRQ(9)
+#define IRQ_PF10 BFIN_PF_IRQ(10)
+#define IRQ_PF11 BFIN_PF_IRQ(11)
+#define IRQ_PF12 BFIN_PF_IRQ(12)
+#define IRQ_PF13 BFIN_PF_IRQ(13)
+#define IRQ_PF14 BFIN_PF_IRQ(14)
+#define IRQ_PF15 BFIN_PF_IRQ(15)
+
+#define BFIN_PG_IRQ(x) ((x) + IRQ_PF15 + 1)
+#define IRQ_PG0 BFIN_PG_IRQ(0)
+#define IRQ_PG1 BFIN_PG_IRQ(1)
+#define IRQ_PG2 BFIN_PG_IRQ(2)
+#define IRQ_PG3 BFIN_PG_IRQ(3)
+#define IRQ_PG4 BFIN_PG_IRQ(4)
+#define IRQ_PG5 BFIN_PG_IRQ(5)
+#define IRQ_PG6 BFIN_PG_IRQ(6)
+#define IRQ_PG7 BFIN_PG_IRQ(7)
+#define IRQ_PG8 BFIN_PG_IRQ(8)
+#define IRQ_PG9 BFIN_PG_IRQ(9)
+#define IRQ_PG10 BFIN_PG_IRQ(10)
+#define IRQ_PG11 BFIN_PG_IRQ(11)
+#define IRQ_PG12 BFIN_PG_IRQ(12)
+#define IRQ_PG13 BFIN_PG_IRQ(13)
+#define IRQ_PG14 BFIN_PG_IRQ(14)
+#define IRQ_PG15 BFIN_PG_IRQ(15)
+
+#define BFIN_PH_IRQ(x) ((x) + IRQ_PG15 + 1)
+#define IRQ_PH0 BFIN_PH_IRQ(0)
+#define IRQ_PH1 BFIN_PH_IRQ(1)
+#define IRQ_PH2 BFIN_PH_IRQ(2)
+#define IRQ_PH3 BFIN_PH_IRQ(3)
+#define IRQ_PH4 BFIN_PH_IRQ(4)
+#define IRQ_PH5 BFIN_PH_IRQ(5)
+#define IRQ_PH6 BFIN_PH_IRQ(6)
+#define IRQ_PH7 BFIN_PH_IRQ(7)
+#define IRQ_PH8 BFIN_PH_IRQ(8)
+#define IRQ_PH9 BFIN_PH_IRQ(9)
+#define IRQ_PH10 BFIN_PH_IRQ(10)
+#define IRQ_PH11 BFIN_PH_IRQ(11)
+#define IRQ_PH12 BFIN_PH_IRQ(12)
+#define IRQ_PH13 BFIN_PH_IRQ(13)
+#define IRQ_PH14 BFIN_PH_IRQ(14) /* N/A */
+#define IRQ_PH15 BFIN_PH_IRQ(15) /* N/A */
+
+#define BFIN_PI_IRQ(x) ((x) + IRQ_PH15 + 1)
+#define IRQ_PI0 BFIN_PI_IRQ(0)
+#define IRQ_PI1 BFIN_PI_IRQ(1)
+#define IRQ_PI2 BFIN_PI_IRQ(2)
+#define IRQ_PI3 BFIN_PI_IRQ(3)
+#define IRQ_PI4 BFIN_PI_IRQ(4)
+#define IRQ_PI5 BFIN_PI_IRQ(5)
+#define IRQ_PI6 BFIN_PI_IRQ(6)
+#define IRQ_PI7 BFIN_PI_IRQ(7)
+#define IRQ_PI8 BFIN_PI_IRQ(8)
+#define IRQ_PI9 BFIN_PI_IRQ(9)
+#define IRQ_PI10 BFIN_PI_IRQ(10)
+#define IRQ_PI11 BFIN_PI_IRQ(11)
+#define IRQ_PI12 BFIN_PI_IRQ(12)
+#define IRQ_PI13 BFIN_PI_IRQ(13)
+#define IRQ_PI14 BFIN_PI_IRQ(14)
+#define IRQ_PI15 BFIN_PI_IRQ(15)
+
+#define BFIN_PJ_IRQ(x) ((x) + IRQ_PI15 + 1)
+#define IRQ_PJ0 BFIN_PJ_IRQ(0)
+#define IRQ_PJ1 BFIN_PJ_IRQ(1)
+#define IRQ_PJ2 BFIN_PJ_IRQ(2)
+#define IRQ_PJ3 BFIN_PJ_IRQ(3)
+#define IRQ_PJ4 BFIN_PJ_IRQ(4)
+#define IRQ_PJ5 BFIN_PJ_IRQ(5)
+#define IRQ_PJ6 BFIN_PJ_IRQ(6)
+#define IRQ_PJ7 BFIN_PJ_IRQ(7)
+#define IRQ_PJ8 BFIN_PJ_IRQ(8)
+#define IRQ_PJ9 BFIN_PJ_IRQ(9)
+#define IRQ_PJ10 BFIN_PJ_IRQ(10)
+#define IRQ_PJ11 BFIN_PJ_IRQ(11)
+#define IRQ_PJ12 BFIN_PJ_IRQ(12)
+#define IRQ_PJ13 BFIN_PJ_IRQ(13)
+#define IRQ_PJ14 BFIN_PJ_IRQ(14) /* N/A */
+#define IRQ_PJ15 BFIN_PJ_IRQ(15) /* N/A */
+
+#define GPIO_IRQ_BASE IRQ_PA0
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PJ15+1)
@@ -343,6 +344,34 @@ Events (highest priority) EMU 0
#define NR_IRQS (SYS_IRQS+1)
#endif
+/* For compatibility reasons with existing code */
+
+#define IRQ_DMAC0_ERR IRQ_DMAC0_ERROR
+#define IRQ_EPPI0_ERR IRQ_EPPI0_ERROR
+#define IRQ_SPORT0_ERR IRQ_SPORT0_ERROR
+#define IRQ_SPORT1_ERR IRQ_SPORT1_ERROR
+#define IRQ_SPI0_ERR IRQ_SPI0_ERROR
+#define IRQ_UART0_ERR IRQ_UART0_ERROR
+#define IRQ_DMAC1_ERR IRQ_DMAC1_ERROR
+#define IRQ_SPORT2_ERR IRQ_SPORT2_ERROR
+#define IRQ_SPORT3_ERR IRQ_SPORT3_ERROR
+#define IRQ_SPI1_ERR IRQ_SPI1_ERROR
+#define IRQ_SPI2_ERR IRQ_SPI2_ERROR
+#define IRQ_UART1_ERR IRQ_UART1_ERROR
+#define IRQ_UART2_ERR IRQ_UART2_ERROR
+#define IRQ_CAN0_ERR IRQ_CAN0_ERROR
+#define IRQ_MXVR_ERR IRQ_MXVR_ERROR
+#define IRQ_EPP1_ERR IRQ_EPP1_ERROR
+#define IRQ_EPP2_ERR IRQ_EPP2_ERROR
+#define IRQ_UART3_ERR IRQ_UART3_ERROR
+#define IRQ_HOST_ERR IRQ_HOST_ERROR
+#define IRQ_PIXC_ERR IRQ_PIXC_ERROR
+#define IRQ_NFC_ERR IRQ_NFC_ERROR
+#define IRQ_ATAPI_ERR IRQ_ATAPI_ERROR
+#define IRQ_CAN1_ERR IRQ_CAN1_ERROR
+#define IRQ_HS_DMA_ERR IRQ_HS_DMA_ERROR
+
+
#define IVG7 7
#define IVG8 8
#define IVG9 9
diff --git a/include/asm-blackfin/mach-bf548/mem_map.h b/include/asm-blackfin/mach-bf548/mem_map.h
index 72d80e8a6e8..ec1597e3183 100644
--- a/include/asm-blackfin/mach-bf548/mem_map.h
+++ b/include/asm-blackfin/mach-bf548/mem_map.h
@@ -51,10 +51,10 @@
/* Level 1 Memory */
/* Memory Map for ADSP-BF548 processors */
-#ifdef CONFIG_BLKFIN_ICACHE
-#define BLKFIN_ICACHESIZE (16*1024)
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE (16*1024)
#else
-#define BLKFIN_ICACHESIZE (0*1024)
+#define BFIN_ICACHESIZE (0*1024)
#endif
#define L1_CODE_START 0xFFA00000
@@ -63,29 +63,29 @@
#define L1_CODE_LENGTH 0xC000
-#ifdef CONFIG_BLKFIN_DCACHE
+#ifdef CONFIG_BFIN_DCACHE
-#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#ifdef CONFIG_BFIN_DCACHE_BANKA
#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
#define L1_DATA_B_LENGTH 0x8000
-#define BLKFIN_DCACHESIZE (16*1024)
-#define BLKFIN_DSUPBANKS 1
+#define BFIN_DCACHESIZE (16*1024)
+#define BFIN_DSUPBANKS 1
#else
#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
#define L1_DATA_B_LENGTH (0x8000 - 0x4000)
-#define BLKFIN_DCACHESIZE (32*1024)
-#define BLKFIN_DSUPBANKS 2
+#define BFIN_DCACHESIZE (32*1024)
+#define BFIN_DSUPBANKS 2
#endif
#else
#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH 0x8000
#define L1_DATA_B_LENGTH 0x8000
-#define BLKFIN_DCACHESIZE (0*1024)
-#define BLKFIN_DSUPBANKS 0
-#endif /*CONFIG_BLKFIN_DCACHE*/
+#define BFIN_DCACHESIZE (0*1024)
+#define BFIN_DSUPBANKS 0
+#endif /*CONFIG_BFIN_DCACHE*/
/* Scratch Pad Memory */
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index f5b32d66517..bed95645688 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -1,184 +1,256 @@
-
/*
- * File: include/asm-blackfin/mach-bf561/anomaly.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * File: include/asm-blackfin/mach-bf561/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List
+ * - Revision N, March 28, 2007; ADSP-BF561 Silicon Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
-/* We do not support 0.1 or 0.4 silicon - sorry */
-#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4))
-#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4
+/* We do not support 0.1, 0.2, or 0.4 silicon - sorry */
+#if __SILICON_REVISION__ < 3 || __SILICON_REVISION__ == 4
+# error Kernel will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
#endif
-/* Issues that are common to 0.5 and 0.3 silicon */
-#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3))
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
- slot1 and store of a P register in slot 2 is not
- supported */
-#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
- updated at the same time. */
-#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned
- memory locations */
-#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR
- registers */
-#define ANOMALY_05000127 /* Signbits instruction not functional under certain
- conditions */
-#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */
-#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
- upper bits */
-#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
-#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
- syncs */
-#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz
- and higher devices */
-#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */
-#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */
-#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
- functional */
-#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
- shadow of a conditional branch */
-#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop
- may cause bad instruction fetches */
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
- external SPORT TX and RX clocks */
-#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */
-#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal
- voltage regulator (VDDint) to increase */
-#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal
- voltage regulator (VDDint) to decrease */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
- VDDint <=0.9V */
-#define ANOMALY_05000274 /* Data cache write back to external synchronous memory
- may be lost */
-#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */
-#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
- registers are interrupted */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
+#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
+/* Trace Buffers may contain errors in emulation mode and/or exception, NMI, reset handlers */
+#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* Testset instructions restricted to 32-bit aligned memory locations */
+#define ANOMALY_05000120 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Erroneous exception when enabling cache */
+#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
+/* Signbits instruction not functional under certain conditions */
+#define ANOMALY_05000127 (1)
+/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */
+#define ANOMALY_05000134 (__SILICON_REVISION__ < 3)
+/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */
+#define ANOMALY_05000135 (__SILICON_REVISION__ < 3)
+/* Stall in multi-unit DMA operations */
+#define ANOMALY_05000136 (__SILICON_REVISION__ < 3)
+/* Allowing the SPORT RX FIFO to fill will cause an overflow */
+#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
+#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
+/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
+#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
+/* DMA and TESTSET conflict when both are accessing external memory */
+#define ANOMALY_05000144 (__SILICON_REVISION__ < 3)
+/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */
+#define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
+/* MDMA may lose the first few words of a descriptor chain */
+#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
+/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
+#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
+/* IMDMA S1/D1 channel may stall */
+#define ANOMALY_05000149 (1)
+/* DMA engine may lose data due to incorrect handshaking */
+#define ANOMALY_05000150 (__SILICON_REVISION__ < 3)
+/* DMA stalls when all three controllers read data from the same source */
+#define ANOMALY_05000151 (__SILICON_REVISION__ < 3)
+/* Execution stall when executing in L2 and doing external accesses */
+#define ANOMALY_05000152 (__SILICON_REVISION__ < 3)
+/* Frame Delay in SPORT Multichannel Mode */
+#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
+/* SPORT TFS signal stays active in multichannel mode outside of valid channels */
+#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
+/* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */
+#define ANOMALY_05000156 (__SILICON_REVISION__ < 4)
+/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
+/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
+#define ANOMALY_05000159 (__SILICON_REVISION__ < 3)
+/* A read from external memory may return a wrong value with data cache enabled */
+#define ANOMALY_05000160 (__SILICON_REVISION__ < 3)
+/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */
+#define ANOMALY_05000161 (__SILICON_REVISION__ < 3)
+/* DMEM_CONTROL<12> is not set on Reset */
+#define ANOMALY_05000162 (__SILICON_REVISION__ < 3)
+/* SPORT transmit data is not gated by external frame sync in certain conditions */
+#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
+/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+#define ANOMALY_05000166 (1)
+/* Turning Serial Ports on with External Frame Syncs */
+#define ANOMALY_05000167 (1)
+/* SDRAM auto-refresh and subsequent Power Ups */
+#define ANOMALY_05000168 (__SILICON_REVISION__ < 5)
+/* DATA CPLB page miss can result in lost write-through cache data writes */
+#define ANOMALY_05000169 (__SILICON_REVISION__ < 5)
+/* Boot-ROM code modifies SICA_IWRx wakeup registers */
+#define ANOMALY_05000171 (__SILICON_REVISION__ < 5)
+/* DSPID register values incorrect */
+#define ANOMALY_05000172 (__SILICON_REVISION__ < 3)
+/* DMA vs Core accesses to external memory */
+#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
+/* Cache Fill Buffer Data lost */
+#define ANOMALY_05000174 (__SILICON_REVISION__ < 5)
+/* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000175 (__SILICON_REVISION__ < 5)
+/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+#define ANOMALY_05000176 (__SILICON_REVISION__ < 5)
+/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
+#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* Disabling the PPI resets the PPI configuration registers */
+#define ANOMALY_05000181 (__SILICON_REVISION__ < 5)
+/* IMDMA does not operate to full speed for 600MHz and higher devices */
+#define ANOMALY_05000182 (1)
+/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */
+#define ANOMALY_05000184 (__SILICON_REVISION__ < 5)
+/* PPI TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000185 (__SILICON_REVISION__ < 5)
+/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */
+#define ANOMALY_05000186 (__SILICON_REVISION__ < 5)
+/* IMDMA Corrupted Data after a Halt */
+#define ANOMALY_05000187 (1)
+/* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */
+#define ANOMALY_05000188 (__SILICON_REVISION__ < 5)
+/* False Protection Exceptions */
+#define ANOMALY_05000189 (__SILICON_REVISION__ < 5)
+/* PPI not functional at core voltage < 1Volt */
+#define ANOMALY_05000190 (1)
+/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
+#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
+/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
+#define ANOMALY_05000193 (__SILICON_REVISION__ < 5)
+/* Restarting SPORT in Specific Modes May Cause Data Corruption */
+#define ANOMALY_05000194 (__SILICON_REVISION__ < 5)
+/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
+/* Current DMA Address Shows Wrong Value During Carry Fix */
+#define ANOMALY_05000199 (__SILICON_REVISION__ < 5)
+/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
+#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
+/* Possible Infinite Stall with Specific Dual-DAG Situation */
+#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
+/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+#define ANOMALY_05000204 (__SILICON_REVISION__ < 5)
+/* Specific sequence that can cause DMA error or DMA stopping */
+#define ANOMALY_05000205 (__SILICON_REVISION__ < 5)
+/* Recovery from "Brown-Out" Condition */
+#define ANOMALY_05000207 (__SILICON_REVISION__ < 5)
+/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */
+#define ANOMALY_05000208 (1)
+/* Speed Path in Computational Unit Affects Certain Instructions */
+#define ANOMALY_05000209 (__SILICON_REVISION__ < 5)
+/* UART TX Interrupt Masked Erroneously */
+#define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
+/* NMI Event at Boot Time Results in Unpredictable State */
+#define ANOMALY_05000219 (__SILICON_REVISION__ < 5)
+/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
+#define ANOMALY_05000220 (__SILICON_REVISION__ < 5)
+/* Incorrect Pulse-Width of UART Start Bit */
+#define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
+/* Scratchpad Memory Bank Reads May Return Incorrect Data */
+#define ANOMALY_05000227 (__SILICON_REVISION__ < 5)
+/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */
+#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
+/* UART STB Bit Incorrectly Affects Receiver Setting */
+#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
+/* SPORT data transmit lines are incorrectly driven in multichannel mode */
+#define ANOMALY_05000232 (__SILICON_REVISION__ < 5)
+/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (__SILICON_REVISION__ < 5)
+/* TESTSET operation forces stall on the other core */
+#define ANOMALY_05000248 (__SILICON_REVISION__ < 5)
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5)
+/* Exception Not Generated for MMR Accesses in Reserved Region */
+#define ANOMALY_05000251 (__SILICON_REVISION__ < 5)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 5)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 3)
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 5)
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
+#define ANOMALY_05000258 (__SILICON_REVISION__ < 5)
+/* ICPLB_STATUS MMR Register May Be Corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ < 5)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 5)
+/* Stores To Data Cache May Be Lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 5)
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ < 5)
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+/* IMDMA destination IRQ status must be read prior to using IMDMA */
+#define ANOMALY_05000266 (__SILICON_REVISION__ > 3)
+/* IMDMA may corrupt data under certain conditions */
+#define ANOMALY_05000267 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
+#define ANOMALY_05000269 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (1)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* Data cache write back to external synchronous memory may be lost */
+#define ANOMALY_05000274 (1)
+/* PPI Timing and Sampling Information Updates */
+#define ANOMALY_05000275 (__SILICON_REVISION__ > 2)
+/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
+#define ANOMALY_05000276 (__SILICON_REVISION__ < 5)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
+/* False Hardware Error Exception When ISR Context Is Not Restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 5)
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+#define ANOMALY_05000283 (1)
+/* A read will receive incorrect data under certain conditions */
+#define ANOMALY_05000287 (__SILICON_REVISION__ < 5)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 5)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+#define ANOMALY_05000302 (1)
+/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI Is Level-Sensitive on First Transfer */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+#define ANOMALY_05000315 (1)
+/* PF2 Output Remains Asserted After SPI Master Boot */
+#define ANOMALY_05000320 (__SILICON_REVISION__ > 3)
+/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */
+#define ANOMALY_05000323 (1)
+/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */
+#define ANOMALY_05000326 (__SILICON_REVISION__ > 3)
+/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */
+#define ANOMALY_05000331 (__SILICON_REVISION__ < 5)
+/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */
+#define ANOMALY_05000332 (__SILICON_REVISION__ < 5)
+/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */
+#define ANOMALY_05000333 (__SILICON_REVISION__ < 5)
-#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000311 (0)
-#if (defined(CONFIG_BF_REV_0_5))
-#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT
- mode with external clock */
-#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to
- using IMDMA */
#endif
-
-#if (defined(CONFIG_BF_REV_0_3))
-#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input)
- Mode with 0 Frame Syncs */
-#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */
-#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through
- cache data writes */
-#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */
-#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */
-#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */
-#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an
- accumulator saturation */
-#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
- Purpose TX or RX modes */
-#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration
- registers */
-#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with
- External Frame Syncs */
-#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */
-#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits
- (not a meaningful mode) */
-#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer
- Placement in Memory */
-#define ANOMALY_05000189 /* False Protection Exception */
-#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
- when polarity setting is changed */
-#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data
- corruption */
-#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding
- memory read */
-#define ANOMALY_05000199 /* DMA current address shows wrong value during carry
- fix */
-#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
- inactive channels in certain conditions */
-#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG
- situation */
-#define ANOMALY_05000204 /* Incorrect data read with write-through cache and
- allocate cache lines on reads only mode */
-#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA
- stopping */
-#define ANOMALY_05000207 /* Recovery from "brown-out" condition */
-#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
- instructions */
-#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
-#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
- state */
-#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and
- Non-Cached On-Chip L2 Memory */
-#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
-#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
- data */
-#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
- Differences in certain Conditions */
-#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
-#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in
- multichannel mode */
-#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
- hardware reset */
-#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of
- Control causes failures */
-#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */
-#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
- (TDM) mode in certain conditions */
-#define ANOMALY_05000251 /* Exception not generated for MMR accesses in
- reserved region */
-#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
-#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12
- of the ICPLB Data registers differ */
-#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
-#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
-#define ANOMALY_05000262 /* Stores to data cache may be lost */
-#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB
- exception */
-#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second
- to last instruction in hardware loop */
-#define ANOMALY_05000276 /* Timing requirements change for External Frame
- Sync PPI Modes with non-zero PPI_DELAY */
-#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
- DMA system instability */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
- not restored */
-#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed
- in a particular stage */
-#define ANOMALY_05000287 /* A read will receive incorrect data under certain
- conditions */
-#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */
-#endif
-
-#endif /* _MACH_ANOMALY_H_ */
diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/include/asm-blackfin/mach-bf561/bf561.h
index 96a5d3a47e4..17e1d5dcef0 100644
--- a/include/asm-blackfin/mach-bf561/bf561.h
+++ b/include/asm-blackfin/mach-bf561/bf561.h
@@ -73,13 +73,13 @@
*/
-#define BLKFIN_ISUBBANKS 4
-#define BLKFIN_IWAYS 4
-#define BLKFIN_ILINES 32
+#define BFIN_ISUBBANKS 4
+#define BFIN_IWAYS 4
+#define BFIN_ILINES 32
-#define BLKFIN_DSUBBANKS 4
-#define BLKFIN_DWAYS 2
-#define BLKFIN_DLINES 64
+#define BFIN_DSUBBANKS 4
+#define BFIN_DWAYS 2
+#define BFIN_DLINES 64
#define WAY0_L 0x1
#define WAY1_L 0x2
@@ -230,93 +230,6 @@
#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO | V_B0PEN | V_B1PEN | V_B2PEN | V_B3PEN | 0x0002)
-#define MAX_VC 600000000
-#define MIN_VC 50000000
-
-/******************************* PLL Settings ********************************/
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#if (CONFIG_VCO_MULT < 0)
-#error "VCO Multiplier is less than 0. Please select a different value"
-#endif
-
-#if (CONFIG_VCO_MULT == 0)
-#error "VCO Multiplier should be greater than 0. Please select a different value"
-#endif
-
-#ifndef CONFIG_CLKIN_HALF
-#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
-#else
-#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
-#endif
-
-#ifndef CONFIG_PLL_BYPASS
-#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
-#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
-#else
-#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
-#endif
-
-#if (CONFIG_SCLK_DIV < 1)
-#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
-#endif
-
-#if (CONFIG_SCLK_DIV > 15)
-#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
-#endif
-
-#if (CONFIG_CCLK_DIV != 1)
-#if (CONFIG_CCLK_DIV != 2)
-#if (CONFIG_CCLK_DIV != 4)
-#if (CONFIG_CCLK_DIV != 8)
-#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value"
-#endif
-#endif
-#endif
-#endif
-
-#if (CONFIG_VCO_HZ > MAX_VC)
-#error "VCO selected is more than maximum value. Please change the VCO multipler"
-#endif
-
-#if (CONFIG_SCLK_HZ > 133000000)
-#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
-#endif
-
-#if (CONFIG_SCLK_HZ < 27000000)
-#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
-#endif
-
-#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ)
-#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ)
-#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
-#error "Please select sclk less than cclk"
-#endif
-#endif
-#endif
-
-#if (CONFIG_CCLK_DIV == 1)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV1
-#endif
-#if (CONFIG_CCLK_DIV == 2)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV2
-#endif
-#if (CONFIG_CCLK_DIV == 4)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV4
-#endif
-#if (CONFIG_CCLK_DIV == 8)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV8
-#endif
-#ifndef CONFIG_CCLK_ACT_DIV
-#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
-#endif
-
-#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1)
-#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
-#endif
-
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-
#ifdef CONFIG_BF561
#define CPU "BF561"
#define CPUID 0x027bb000
@@ -326,83 +239,4 @@
#define CPUID 0x0
#endif
-#if (CONFIG_MEM_SIZE % 4)
-#error "SDRAM memory size must be a multiple of 4MB!"
-#endif
-#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
-#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK)
-#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID)
-
-/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
-
-#define ANOMALY_05000158_WORKAROUND 0x200
-#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */
-#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \
- | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
-#else /*Write Through */
-#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_DIRTY \
- | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
-#endif
-
-
-#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
-#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
-#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
-#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
-
-#define L2_MEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
-
-#define SIZE_1K 0x00000400 /* 1K */
-#define SIZE_4K 0x00001000 /* 4K */
-#define SIZE_1M 0x00100000 /* 1M */
-#define SIZE_4M 0x00400000 /* 4M */
-
-#define MAX_CPLBS (16 * 2)
-
-/*
-* Number of required data CPLB switchtable entries
-* MEMSIZE / 4 (we mostly install 4M page size CPLBs
-* approx 16 for smaller 1MB page size CPLBs for allignment purposes
-* 1 for L1 Data Memory
-* 1 for L2 Data Memory
-* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
-* 64 for ASYNC Memory
-*/
-
-
-#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1 + 64) * 2)
-
-/*
-* Number of required instruction CPLB switchtable entries
-* MEMSIZE / 4 (we mostly install 4M page size CPLBs
-* approx 12 for smaller 1MB page size CPLBs for allignment purposes
-* 1 for L1 Instruction Memory
-* 1 for L2 Instruction Memory
-* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
-*/
-
-#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1 + 1) * 2)
-
-#if 0 /* comment by mhfan */
-/* Event Vector Table Address */
-#define EVT_EMULATION_ADDR 0xffe02000
-#define EVT_RESET_ADDR 0xffe02004
-#define EVT_NMI_ADDR 0xffe02008
-#define EVT_EXCEPTION_ADDR 0xffe0200c
-#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010
-#define EVT_HARDWARE_ERROR_ADDR 0xffe02014
-#define EVT_TIMER_ADDR 0xffe02018
-#define EVT_IVG7_ADDR 0xffe0201c
-#define EVT_IVG8_ADDR 0xffe02020
-#define EVT_IVG9_ADDR 0xffe02024
-#define EVT_IVG10_ADDR 0xffe02028
-#define EVT_IVG11_ADDR 0xffe0202c
-#define EVT_IVG12_ADDR 0xffe02030
-#define EVT_IVG13_ADDR 0xffe02034
-#define EVT_IVG14_ADDR 0xffe02038
-#define EVT_IVG15_ADDR 0xffe0203c
-#define EVT_OVERRIDE_ADDR 0xffe02100
-#endif /* comment by mhfan */
-
#endif /* __MACH_BF561_H__ */
diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h
index 2537c845e8b..562aee39895 100644
--- a/include/asm-blackfin/mach-bf561/blackfin.h
+++ b/include/asm-blackfin/mach-bf561/blackfin.h
@@ -38,7 +38,7 @@
#include "defBF561.h"
#include "anomaly.h"
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
#include "cdefBF561.h"
#endif
diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h
index 73d4d65249c..d667816486c 100644
--- a/include/asm-blackfin/mach-bf561/cdefBF561.h
+++ b/include/asm-blackfin/mach-bf561/cdefBF561.h
@@ -31,11 +31,8 @@
#ifndef _CDEF_BF561_H
#define _CDEF_BF561_H
-/*
-#if !defined(__ADSPBF561__)
-#warning cdefBF561.h should only be included for BF561 chip.
-#endif
-*/
+#include <asm/blackfin.h>
+
/* include all Core registers and bit definitions */
#include "defBF561.h"
@@ -67,7 +64,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
bfin_write32(SICA_IWR1, 0);
bfin_write16(VR_CTL, val);
- __builtin_bfin_ssync();
+ SSYNC();
local_irq_save(flags);
asm("IDLE;");
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h
index 0f2dc6e6335..bf7dc4e0006 100644
--- a/include/asm-blackfin/mach-bf561/defBF561.h
+++ b/include/asm-blackfin/mach-bf561/defBF561.h
@@ -120,6 +120,7 @@
#define UART_GCTL 0xFFC00424 /* Global Control Register */
/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI0_REGBASE 0xFFC00500
#define SPI_CTL 0xFFC00500 /* SPI Control Register */
#define SPI_FLG 0xFFC00504 /* SPI Flag register */
#define SPI_STAT 0xFFC00508 /* SPI Status register */
diff --git a/include/asm-blackfin/mach-bf561/irq.h b/include/asm-blackfin/mach-bf561/irq.h
index a753ce720d7..12789927db3 100644
--- a/include/asm-blackfin/mach-bf561/irq.h
+++ b/include/asm-blackfin/mach-bf561/irq.h
@@ -289,6 +289,8 @@
#define IRQ_PF46 119
#define IRQ_PF47 120
+#define GPIO_IRQ_BASE IRQ_PF0
+
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PF47 + 1)
#else
diff --git a/include/asm-blackfin/mach-bf561/mem_map.h b/include/asm-blackfin/mach-bf561/mem_map.h
index ebac9a8d838..f7ac09cf2c3 100644
--- a/include/asm-blackfin/mach-bf561/mem_map.h
+++ b/include/asm-blackfin/mach-bf561/mem_map.h
@@ -21,10 +21,10 @@
/* Level 1 Memory */
-#ifdef CONFIG_BLKFIN_CACHE
-#define BLKFIN_ICACHESIZE (16*1024)
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE (16*1024)
#else
-#define BLKFIN_ICACHESIZE (0*1024)
+#define BFIN_ICACHESIZE (0*1024)
#endif
/* Memory Map for ADSP-BF561 processors */
@@ -36,29 +36,29 @@
#define L1_CODE_LENGTH 0x4000
-#ifdef CONFIG_BLKFIN_DCACHE
+#ifdef CONFIG_BFIN_DCACHE
-#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#ifdef CONFIG_BFIN_DCACHE_BANKA
#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
#define L1_DATA_B_LENGTH 0x8000
-#define BLKFIN_DCACHESIZE (16*1024)
-#define BLKFIN_DSUPBANKS 1
+#define BFIN_DCACHESIZE (16*1024)
+#define BFIN_DSUPBANKS 1
#else
#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
#define L1_DATA_B_LENGTH (0x8000 - 0x4000)
-#define BLKFIN_DCACHESIZE (32*1024)
-#define BLKFIN_DSUPBANKS 2
+#define BFIN_DCACHESIZE (32*1024)
+#define BFIN_DSUPBANKS 2
#endif
#else
#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
#define L1_DATA_A_LENGTH 0x8000
#define L1_DATA_B_LENGTH 0x8000
-#define BLKFIN_DCACHESIZE (0*1024)
-#define BLKFIN_DSUPBANKS 0
-#endif /*CONFIG_BLKFIN_DCACHE*/
+#define BFIN_DCACHESIZE (0*1024)
+#define BFIN_DSUPBANKS 0
+#endif /*CONFIG_BFIN_DCACHE*/
#endif
/* Level 2 Memory */
diff --git a/include/asm-blackfin/mach-bf561/portmux.h b/include/asm-blackfin/mach-bf561/portmux.h
index 10d11d5ffe2..132ad31665e 100644
--- a/include/asm-blackfin/mach-bf561/portmux.h
+++ b/include/asm-blackfin/mach-bf561/portmux.h
@@ -81,7 +81,7 @@
#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PF1))
#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PF0))
#define P_SPI0_MOSI (P_DONTCARE)
-#define P_SPI0_MIS0 (P_DONTCARE)
+#define P_SPI0_MISO (P_DONTCARE)
#define P_SPI0_SCK (P_DONTCARE)
#endif /* _MACH_PORTMUX_H_ */
diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
index 94ed381e560..ede210eca4e 100644
--- a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
+++ b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
@@ -39,7 +39,7 @@
#define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS)
#define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val)
#define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL)
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
extern void bfin_write_DMEM_CONTROL(unsigned int val);
#else
#define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val)
@@ -129,7 +129,7 @@ extern void bfin_write_DMEM_CONTROL(unsigned int val);
#define DTEST_DATA3 0xFFE0040C
*/
#define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL)
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
extern void bfin_write_IMEM_CONTROL(unsigned int val);
#else
#define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val)
diff --git a/include/asm-blackfin/mach-common/clocks.h b/include/asm-blackfin/mach-common/clocks.h
new file mode 100644
index 00000000000..033bba92d61
--- /dev/null
+++ b/include/asm-blackfin/mach-common/clocks.h
@@ -0,0 +1,70 @@
+/*
+ * File: include/asm-blackfin/mach-common/clocks.h
+ * Based on: include/asm-blackfin/mach-bf537/bf537.h
+ * Author: Robin Getz <rgetz@blackfin.uclinux.org>
+ *
+ * Created: 25Jul07
+ * Description: Common Clock definitions for various kernel files
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BFIN_CLOCKS_H
+#define _BFIN_CLOCKS_H
+
+#ifdef CONFIG_CCLK_DIV_1
+# define CONFIG_CCLK_ACT_DIV CCLK_DIV1
+# define CONFIG_CCLK_DIV 1
+#endif
+
+#ifdef CONFIG_CCLK_DIV_2
+# define CONFIG_CCLK_ACT_DIV CCLK_DIV2
+# define CONFIG_CCLK_DIV 2
+#endif
+
+#ifdef CONFIG_CCLK_DIV_4
+# define CONFIG_CCLK_ACT_DIV CCLK_DIV4
+# define CONFIG_CCLK_DIV 4
+#endif
+
+#ifdef CONFIG_CCLK_DIV_8
+# define CONFIG_CCLK_ACT_DIV CCLK_DIV8
+# define CONFIG_CCLK_DIV 8
+#endif
+
+#ifndef CONFIG_PLL_BYPASS
+# ifndef CONFIG_CLKIN_HALF
+# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
+# else
+# define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
+# endif
+
+# define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
+# define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
+
+#else
+# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ)
+# define CONFIG_CCLK_HZ (CONFIG_CLKIN_HZ)
+# define CONFIG_SCLK_HZ (CONFIG_CLKIN_HZ)
+# define CONFIG_VCO_MULT 0
+#endif
+
+#endif
diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/include/asm-blackfin/mach-common/def_LPBlackfin.h
index be1ece8c0c2..c1d8c4a78fc 100644
--- a/include/asm-blackfin/mach-common/def_LPBlackfin.h
+++ b/include/asm-blackfin/mach-common/def_LPBlackfin.h
@@ -33,81 +33,77 @@
#include <asm/mach/anomaly.h>
-/*#if !defined(__ADSPLPBLACKFIN__)
-#warning def_LPBlackfin.h should only be included for 532 compatible chips.
-#endif
-*/
-
#define MK_BMSK_(x) (1<<x)
-#if defined(ANOMALY_05000198)
-
-#define bfin_read8(addr) ({ unsigned char __v; \
- __asm__ __volatile__ ("NOP;\n\t" \
- "%0 = b[%1] (z);\n\t" \
- : "=d"(__v) : "a"(addr)); \
- __v; })
-
-#define bfin_read16(addr) ({ unsigned __v; \
- __asm__ __volatile__ ("NOP;\n\t"\
- "%0 = w[%1] (z);\n\t"\
- : "=d"(__v) : "a"(addr)); (unsigned short)__v; })
-
-#define bfin_read32(addr) ({ unsigned __v; \
- __asm__ __volatile__ ("NOP;\n\t"\
- "%0 = [%1];\n\t"\
- : "=d"(__v) : "a"(addr)); __v; })
-
-#define bfin_write8(addr, val) ({ \
- __asm__ __volatile__ ("NOP;\n\t" \
- "b[%0] = %1;\n\t" \
- : : "a"(addr), "d"(val) : "memory");})
+#ifndef __ASSEMBLY__
-#define bfin_write16(addr,val) ({\
- __asm__ __volatile__ ("NOP;\n\t"\
- "w[%0] = %1;\n\t"\
- : : "a"(addr) , "d"(val) : "memory");})
-
-#define bfin_write32(addr,val) ({\
- __asm__ __volatile__ ("NOP;\n\t"\
- "[%0] = %1;\n\t"\
- : : "a"(addr) , "d"(val) : "memory");})
+#include <linux/types.h>
+#if ANOMALY_05000198
+# define NOP_PAD_ANOMALY_05000198 "nop;"
#else
-
-#define bfin_read8(addr) ({ unsigned char __v; \
- __asm__ __volatile__ ( \
- "%0 = b[%1] (z);\n\t" \
- :"=d"(__v) : "a"(addr)); \
- __v; })
-
-#define bfin_read16(addr) ({ unsigned __v; \
- __asm__ __volatile__ (\
- "%0 = w[%1] (z);\n\t"\
- : "=d"(__v) : "a"(addr)); (unsigned short)__v; })
-
-#define bfin_read32(addr) ({ unsigned __v; \
- __asm__ __volatile__ (\
- "%0 = [%1];\n\t"\
- : "=d"(__v) : "a"(addr)); __v; })
-
-#define bfin_write8(addr, val) ({ \
- __asm__ __volatile__ ( \
- "b[%0] = %1; \n\t" \
- ::"a"(addr), "d"(val) : "memory");})
-
-#define bfin_write16(addr,val) ({\
- __asm__ __volatile__ (\
- "w[%0] = %1;\n\t"\
- : : "a"(addr) , "d"(val) : "memory");})
-
-#define bfin_write32(addr,val) ({\
- __asm__ __volatile__ (\
- "[%0] = %1;\n\t"\
- : : "a"(addr) , "d"(val) : "memory");})
-
+# define NOP_PAD_ANOMALY_05000198
#endif
+#define bfin_read8(addr) ({ \
+ uint8_t __v; \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "%0 = b[%1] (z);" \
+ : "=d" (__v) \
+ : "a" (addr) \
+ ); \
+ __v; })
+
+#define bfin_read16(addr) ({ \
+ uint16_t __v; \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "%0 = w[%1] (z);" \
+ : "=d" (__v) \
+ : "a" (addr) \
+ ); \
+ __v; })
+
+#define bfin_read32(addr) ({ \
+ uint32_t __v; \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "%0 = [%1];" \
+ : "=d" (__v) \
+ : "a" (addr) \
+ ); \
+ __v; })
+
+#define bfin_write8(addr, val) \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "b[%0] = %1;" \
+ : \
+ : "a" (addr), "d" (val) \
+ : "memory" \
+ )
+
+#define bfin_write16(addr, val) \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "w[%0] = %1;" \
+ : \
+ : "a" (addr), "d" (val) \
+ : "memory" \
+ )
+
+#define bfin_write32(addr, val) \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "[%0] = %1;" \
+ : \
+ : "a" (addr), "d" (val) \
+ : "memory" \
+ )
+
+#endif /* __ASSEMBLY__ */
+
/**************************************************
* System Register Bits
**************************************************/
@@ -643,6 +639,7 @@
#define CPLB_USER_RD 0x00000004 /* 0=no read access, 1=read access
* allowed (user mode)
*/
+
#define PAGE_SIZE_1KB 0x00000000 /* 1 KB page size */
#define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */
#define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */
@@ -675,6 +672,8 @@
*/
#define CPLB_WT 0x00004000 /* 0=write-back, 1=write-through */
+#define CPLB_ALL_ACCESS CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR
+
/* TBUFCTL Masks */
#define TBUFPWR 0x0001
#define TBUFEN 0x0002
diff --git a/include/asm-blackfin/pgtable.h b/include/asm-blackfin/pgtable.h
index 5a8f9e431c4..b11b114689c 100644
--- a/include/asm-blackfin/pgtable.h
+++ b/include/asm-blackfin/pgtable.h
@@ -4,7 +4,7 @@
#include <asm-generic/4level-fixup.h>
#include <asm/page.h>
-#include <asm/cplb.h>
+#include <asm/mach-common/def_LPBlackfin.h>
typedef pte_t *pte_addr_t;
/*
diff --git a/include/asm-blackfin/reboot.h b/include/asm-blackfin/reboot.h
new file mode 100644
index 00000000000..6d448b5f598
--- /dev/null
+++ b/include/asm-blackfin/reboot.h
@@ -0,0 +1,20 @@
+/*
+ * include/asm-blackfin/reboot.h - shutdown/reboot header
+ *
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_REBOOT_H__
+#define __ASM_REBOOT_H__
+
+/* optional board specific hooks */
+extern void native_machine_restart(char *cmd);
+extern void native_machine_halt(void);
+extern void native_machine_power_off(void);
+
+/* common reboot workarounds */
+extern void bfin_gpio_reset_spi0_ssel1(void);
+
+#endif
diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h
index 5e5f1a0566c..2b3d47d0bbb 100644
--- a/include/asm-blackfin/system.h
+++ b/include/asm-blackfin/system.h
@@ -36,6 +36,7 @@
#include <linux/linkage.h>
#include <linux/compiler.h>
+#include <asm/mach/anomaly.h>
/*
* Interrupt configuring macros.
@@ -43,53 +44,60 @@
extern unsigned long irq_flags;
-#define local_irq_enable() do { \
- __asm__ __volatile__ ( \
- "sti %0;" \
- ::"d"(irq_flags)); \
-} while (0)
+#define local_irq_enable() \
+ __asm__ __volatile__( \
+ "sti %0;" \
+ : \
+ : "d" (irq_flags) \
+ )
-#define local_irq_disable() do { \
- int _tmp_dummy; \
- __asm__ __volatile__ ( \
- "cli %0;" \
- :"=d" (_tmp_dummy):); \
-} while (0)
+#define local_irq_disable() \
+ do { \
+ int __tmp_dummy; \
+ __asm__ __volatile__( \
+ "cli %0;" \
+ : "=d" (__tmp_dummy) \
+ ); \
+ } while (0)
-#if defined(ANOMALY_05000244) && defined (CONFIG_BLKFIN_CACHE)
-#define idle_with_irq_disabled() do { \
- __asm__ __volatile__ ( \
- "nop; nop;\n" \
- ".align 8;\n" \
- "sti %0; idle;\n" \
- ::"d" (irq_flags)); \
-} while (0)
+#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
+# define NOP_PAD_ANOMALY_05000244 "nop; nop;"
#else
-#define idle_with_irq_disabled() do { \
- __asm__ __volatile__ ( \
- ".align 8;\n" \
- "sti %0; idle;\n" \
- ::"d" (irq_flags)); \
-} while (0)
+# define NOP_PAD_ANOMALY_05000244
#endif
+#define idle_with_irq_disabled() \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000244 \
+ ".align 8;" \
+ "sti %0;" \
+ "idle;" \
+ : \
+ : "d" (irq_flags) \
+ )
+
#ifdef CONFIG_DEBUG_HWERR
-#define __save_and_cli(x) do { \
- __asm__ __volatile__ ( \
- "cli %0;\n\tsti %1;" \
- :"=&d"(x): "d" (0x3F)); \
-} while (0)
+# define __save_and_cli(x) \
+ __asm__ __volatile__( \
+ "cli %0;" \
+ "sti %1;" \
+ : "=&d" (x) \
+ : "d" (0x3F) \
+ )
#else
-#define __save_and_cli(x) do { \
- __asm__ __volatile__ ( \
- "cli %0;" \
- :"=&d"(x):); \
-} while (0)
+# define __save_and_cli(x) \
+ __asm__ __volatile__( \
+ "cli %0;" \
+ : "=&d" (x) \
+ )
#endif
-#define local_save_flags(x) asm volatile ("cli %0;" \
- "sti %0;" \
- :"=d"(x):);
+#define local_save_flags(x) \
+ __asm__ __volatile__( \
+ "cli %0;" \
+ "sti %0;" \
+ : "=d" (x) \
+ )
#ifdef CONFIG_DEBUG_HWERR
#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0)
@@ -97,10 +105,11 @@ extern unsigned long irq_flags;
#define irqs_enabled_from_flags(x) ((x) != 0x1f)
#endif
-#define local_irq_restore(x) do { \
- if (irqs_enabled_from_flags(x)) \
- local_irq_enable (); \
-} while (0)
+#define local_irq_restore(x) \
+ do { \
+ if (irqs_enabled_from_flags(x)) \
+ local_irq_enable(); \
+ } while (0)
/* For spinlocks etc */
#define local_irq_save(x) __save_and_cli(x)
diff --git a/include/asm-blackfin/termbits.h b/include/asm-blackfin/termbits.h
index 4eac38de8ce..f37feb7cf89 100644
--- a/include/asm-blackfin/termbits.h
+++ b/include/asm-blackfin/termbits.h
@@ -140,6 +140,7 @@ struct ktermios {
#define HUPCL 0002000
#define CLOCAL 0004000
#define CBAUDEX 0010000
+#define BOTHER 0010000
#define B57600 0010001
#define B115200 0010002
#define B230400 0010003
@@ -155,10 +156,12 @@ struct ktermios {
#define B3000000 0010015
#define B3500000 0010016
#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CIBAUD 002003600000 /* input baud rate */
#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
/* c_lflag bits */
#define ISIG 0000001
#define ICANON 0000002
diff --git a/include/asm-blackfin/termios.h b/include/asm-blackfin/termios.h
index 5c41478a51c..e31fe859650 100644
--- a/include/asm-blackfin/termios.h
+++ b/include/asm-blackfin/termios.h
@@ -98,8 +98,14 @@ struct termio {
copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
})
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+#define user_termios_to_kernel_termios(k, u) \
+ copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) \
+ copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) \
+ copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) \
+ copy_to_user(u, k, sizeof(struct termios))
#endif /* __KERNEL__ */
diff --git a/include/asm-blackfin/trace.h b/include/asm-blackfin/trace.h
index 9c2474c9a58..6313aace9d5 100644
--- a/include/asm-blackfin/trace.h
+++ b/include/asm-blackfin/trace.h
@@ -6,23 +6,46 @@
#ifndef _BLACKFIN_TRACE_
#define _BLACKFIN_TRACE_
+/* Normally, we use ON, but you can't turn on software expansion until
+ * interrupts subsystem is ready
+ */
+
+#define BFIN_TRACE_INIT ((CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION << 4) | 0x03)
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+#define BFIN_TRACE_ON (BFIN_TRACE_INIT | (CONFIG_DEBUG_BFIN_HWTRACE_EXPAND << 2))
+#else
+#define BFIN_TRACE_ON (BFIN_TRACE_INIT)
+#endif
+
#ifndef __ASSEMBLY__
+extern unsigned long trace_buff_offset;
+extern unsigned long software_trace_buff[];
+
/* Trace Macros for C files */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+
#define trace_buffer_save(x) \
- do { \
- (x) = bfin_read_TBUFCTL(); \
- bfin_write_TBUFCTL((x) & ~TBUFEN); \
- } while (0)
+ do { \
+ (x) = bfin_read_TBUFCTL(); \
+ bfin_write_TBUFCTL((x) & ~TBUFEN); \
+ } while (0)
#define trace_buffer_restore(x) \
- do { \
- bfin_write_TBUFCTL((x)); \
- } while (0)
+ do { \
+ bfin_write_TBUFCTL((x)); \
+ } while (0)
+#else /* DEBUG_BFIN_HWTRACE_ON */
+
+#define trace_buffer_save(x)
+#define trace_buffer_restore(x)
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
#else
/* Trace Macros for Assembly files */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+
#define TRACE_BUFFER_START(preg, dreg) trace_buffer_start(preg, dreg)
#define TRACE_BUFFER_STOP(preg, dreg) trace_buffer_stop(preg, dreg)
@@ -32,12 +55,26 @@
dreg = 0x1; \
[preg] = dreg;
-#define trace_buffer_start(preg, dreg) \
+#define trace_buffer_start(preg, dreg) \
preg.L = LO(TBUFCTL); \
preg.H = HI(TBUFCTL); \
- dreg = 0x13; \
+ dreg = BFIN_TRACE_ON; \
+ [preg] = dreg;
+
+#define trace_buffer_init(preg, dreg) \
+ preg.L = LO(TBUFCTL); \
+ preg.H = HI(TBUFCTL); \
+ dreg = BFIN_TRACE_INIT; \
[preg] = dreg;
+#else /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
+
+#define trace_buffer_stop(preg, dreg)
+#define trace_buffer_start(preg, dreg)
+#define trace_buffer_init(preg, dreg)
+
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
+
#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
# define DEBUG_START_HWTRACE(preg, dreg) trace_buffer_start(preg, dreg)
# define DEBUG_STOP_HWTRACE(preg, dreg) trace_buffer_stop(preg, dreg)
diff --git a/include/asm-i386/Kbuild b/include/asm-i386/Kbuild
deleted file mode 100644
index cbf6e8f1087..00000000000
--- a/include/asm-i386/Kbuild
+++ /dev/null
@@ -1,12 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y += boot.h
-header-y += debugreg.h
-header-y += ldt.h
-header-y += msr-index.h
-header-y += ptrace-abi.h
-header-y += ucontext.h
-
-unifdef-y += msr.h
-unifdef-y += mtrr.h
-unifdef-y += vm86.h
diff --git a/include/asm-i386/k8.h b/include/asm-i386/k8.h
deleted file mode 100644
index dfd88a6e604..00000000000
--- a/include/asm-i386/k8.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-x86_64/k8.h>
diff --git a/include/asm-i386/pci-direct.h b/include/asm-i386/pci-direct.h
deleted file mode 100644
index 4f6738b0820..00000000000
--- a/include/asm-i386/pci-direct.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "asm-x86_64/pci-direct.h"
diff --git a/include/asm-i386/stacktrace.h b/include/asm-i386/stacktrace.h
deleted file mode 100644
index 7d1f6a5cbfc..00000000000
--- a/include/asm-i386/stacktrace.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-x86_64/stacktrace.h>
diff --git a/include/asm-i386/termios.h b/include/asm-i386/termios.h
deleted file mode 100644
index f520b7c16fa..00000000000
--- a/include/asm-i386/termios.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifndef _I386_TERMIOS_H
-#define _I386_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-#include <linux/module.h>
-
-/* intr=^C quit=^\ erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
- unsigned short __tmp; \
- get_user(__tmp,&(termio)->x); \
- *(unsigned short *) &(termios)->x = __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
- SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
- copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
- put_user((termios)->c_iflag, &(termio)->c_iflag); \
- put_user((termios)->c_oflag, &(termio)->c_oflag); \
- put_user((termios)->c_cflag, &(termio)->c_cflag); \
- put_user((termios)->c_lflag, &(termio)->c_lflag); \
- put_user((termios)->c_line, &(termio)->c_line); \
- copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif /* __KERNEL__ */
-
-#endif /* _I386_TERMIOS_H */
diff --git a/include/asm-sh/mpc1211/mc146818rtc.h b/include/asm-sh/mpc1211/mc146818rtc.h
index 0ec78f66cea..e245f2a3cd7 100644
--- a/include/asm-sh/mpc1211/mc146818rtc.h
+++ b/include/asm-sh/mpc1211/mc146818rtc.h
@@ -1,6 +1,6 @@
/*
* MPC1211 uses PC/AT style RTC definitions.
*/
-#include <asm-i386/mc146818rtc.h>
+#include <asm-x86/mc146818rtc_32.h>
diff --git a/include/asm-x86/8253pit.h b/include/asm-x86/8253pit.h
new file mode 100644
index 00000000000..d3c2b38a661
--- /dev/null
+++ b/include/asm-x86/8253pit.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "8253pit_32.h"
+#else
+# include "8253pit_64.h"
+#endif
diff --git a/include/asm-i386/8253pit.h b/include/asm-x86/8253pit_32.h
index 96c7c3592da..96c7c3592da 100644
--- a/include/asm-i386/8253pit.h
+++ b/include/asm-x86/8253pit_32.h
diff --git a/include/asm-x86_64/8253pit.h b/include/asm-x86/8253pit_64.h
index 285f78488cc..285f78488cc 100644
--- a/include/asm-x86_64/8253pit.h
+++ b/include/asm-x86/8253pit_64.h
diff --git a/include/asm-x86/Kbuild b/include/asm-x86/Kbuild
new file mode 100644
index 00000000000..c5e43cb3987
--- /dev/null
+++ b/include/asm-x86/Kbuild
@@ -0,0 +1,88 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += boot.h
+header-y += bootsetup.h
+header-y += debugreg_32.h
+header-y += debugreg_64.h
+header-y += debugreg.h
+header-y += ldt_32.h
+header-y += ldt_64.h
+header-y += ldt.h
+header-y += msr-index.h
+header-y += prctl.h
+header-y += ptrace-abi_32.h
+header-y += ptrace-abi_64.h
+header-y += ptrace-abi.h
+header-y += sigcontext32.h
+header-y += ucontext_32.h
+header-y += ucontext_64.h
+header-y += ucontext.h
+header-y += vsyscall32.h
+
+unifdef-y += a.out_32.h
+unifdef-y += a.out_64.h
+unifdef-y += auxvec_32.h
+unifdef-y += auxvec_64.h
+unifdef-y += byteorder_32.h
+unifdef-y += byteorder_64.h
+unifdef-y += elf_32.h
+unifdef-y += elf_64.h
+unifdef-y += errno_32.h
+unifdef-y += errno_64.h
+unifdef-y += ioctls_32.h
+unifdef-y += ioctls_64.h
+unifdef-y += ipcbuf_32.h
+unifdef-y += ipcbuf_64.h
+unifdef-y += mce.h
+unifdef-y += mman_32.h
+unifdef-y += mman_64.h
+unifdef-y += msgbuf_32.h
+unifdef-y += msgbuf_64.h
+unifdef-y += msr_32.h
+unifdef-y += msr_64.h
+unifdef-y += msr.h
+unifdef-y += mtrr_32.h
+unifdef-y += mtrr_64.h
+unifdef-y += mtrr.h
+unifdef-y += page_32.h
+unifdef-y += page_64.h
+unifdef-y += param_32.h
+unifdef-y += param_64.h
+unifdef-y += posix_types_32.h
+unifdef-y += posix_types_64.h
+unifdef-y += ptrace_32.h
+unifdef-y += ptrace_64.h
+unifdef-y += resource_32.h
+unifdef-y += resource_64.h
+unifdef-y += sembuf_32.h
+unifdef-y += sembuf_64.h
+unifdef-y += setup_32.h
+unifdef-y += setup_64.h
+unifdef-y += shmbuf_32.h
+unifdef-y += shmbuf_64.h
+unifdef-y += shmparam_32.h
+unifdef-y += shmparam_64.h
+unifdef-y += sigcontext_32.h
+unifdef-y += sigcontext_64.h
+unifdef-y += siginfo_32.h
+unifdef-y += siginfo_64.h
+unifdef-y += signal_32.h
+unifdef-y += signal_64.h
+unifdef-y += sockios_32.h
+unifdef-y += sockios_64.h
+unifdef-y += stat_32.h
+unifdef-y += stat_64.h
+unifdef-y += statfs_32.h
+unifdef-y += statfs_64.h
+unifdef-y += termbits_32.h
+unifdef-y += termbits_64.h
+unifdef-y += termios_32.h
+unifdef-y += termios_64.h
+unifdef-y += types_32.h
+unifdef-y += types_64.h
+unifdef-y += unistd_32.h
+unifdef-y += unistd_64.h
+unifdef-y += user_32.h
+unifdef-y += user_64.h
+unifdef-y += vm86.h
+unifdef-y += vsyscall.h
diff --git a/include/asm-x86/a.out.h b/include/asm-x86/a.out.h
new file mode 100644
index 00000000000..5bc9b1d3b22
--- /dev/null
+++ b/include/asm-x86/a.out.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "a.out_32.h"
+# else
+# include "a.out_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "a.out_32.h"
+# else
+# include "a.out_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/a.out.h b/include/asm-x86/a.out_32.h
index 851a60f8258..851a60f8258 100644
--- a/include/asm-i386/a.out.h
+++ b/include/asm-x86/a.out_32.h
diff --git a/include/asm-x86_64/a.out.h b/include/asm-x86/a.out_64.h
index e789300e41a..e789300e41a 100644
--- a/include/asm-x86_64/a.out.h
+++ b/include/asm-x86/a.out_64.h
diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h
new file mode 100644
index 00000000000..0693689d414
--- /dev/null
+++ b/include/asm-x86/acpi.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "acpi_32.h"
+#else
+# include "acpi_64.h"
+#endif
diff --git a/include/asm-i386/acpi.h b/include/asm-x86/acpi_32.h
index 125179adf04..125179adf04 100644
--- a/include/asm-i386/acpi.h
+++ b/include/asm-x86/acpi_32.h
diff --git a/include/asm-x86_64/acpi.h b/include/asm-x86/acpi_64.h
index 98173357dd8..98173357dd8 100644
--- a/include/asm-x86_64/acpi.h
+++ b/include/asm-x86/acpi_64.h
diff --git a/include/asm-x86/agp.h b/include/asm-x86/agp.h
new file mode 100644
index 00000000000..9348f1e4f6f
--- /dev/null
+++ b/include/asm-x86/agp.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "agp_32.h"
+#else
+# include "agp_64.h"
+#endif
diff --git a/include/asm-i386/agp.h b/include/asm-x86/agp_32.h
index 6af173dbf12..6af173dbf12 100644
--- a/include/asm-i386/agp.h
+++ b/include/asm-x86/agp_32.h
diff --git a/include/asm-x86_64/agp.h b/include/asm-x86/agp_64.h
index de338666f3f..de338666f3f 100644
--- a/include/asm-x86_64/agp.h
+++ b/include/asm-x86/agp_64.h
diff --git a/include/asm-x86/alternative-asm.i b/include/asm-x86/alternative-asm.i
new file mode 100644
index 00000000000..4f360cd3c88
--- /dev/null
+++ b/include/asm-x86/alternative-asm.i
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "alternative-asm_32.i"
+#else
+# include "alternative-asm_64.i"
+#endif
diff --git a/include/asm-i386/alternative-asm.i b/include/asm-x86/alternative-asm_32.i
index f0510209ccb..f0510209ccb 100644
--- a/include/asm-i386/alternative-asm.i
+++ b/include/asm-x86/alternative-asm_32.i
diff --git a/include/asm-x86_64/alternative-asm.i b/include/asm-x86/alternative-asm_64.i
index 0b3f1a2bb2c..0b3f1a2bb2c 100644
--- a/include/asm-x86_64/alternative-asm.i
+++ b/include/asm-x86/alternative-asm_64.i
diff --git a/include/asm-x86/alternative.h b/include/asm-x86/alternative.h
new file mode 100644
index 00000000000..9eef6a32a13
--- /dev/null
+++ b/include/asm-x86/alternative.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "alternative_32.h"
+#else
+# include "alternative_64.h"
+#endif
diff --git a/include/asm-i386/alternative.h b/include/asm-x86/alternative_32.h
index bda6c810c0f..bda6c810c0f 100644
--- a/include/asm-i386/alternative.h
+++ b/include/asm-x86/alternative_32.h
diff --git a/include/asm-x86_64/alternative.h b/include/asm-x86/alternative_64.h
index ab161e81015..ab161e81015 100644
--- a/include/asm-x86_64/alternative.h
+++ b/include/asm-x86/alternative_64.h
diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h
new file mode 100644
index 00000000000..9fbcc0bd2ac
--- /dev/null
+++ b/include/asm-x86/apic.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "apic_32.h"
+#else
+# include "apic_64.h"
+#endif
diff --git a/include/asm-i386/apic.h b/include/asm-x86/apic_32.h
index 4091b33dcb1..4091b33dcb1 100644
--- a/include/asm-i386/apic.h
+++ b/include/asm-x86/apic_32.h
diff --git a/include/asm-x86_64/apic.h b/include/asm-x86/apic_64.h
index 85125ef3c41..85125ef3c41 100644
--- a/include/asm-x86_64/apic.h
+++ b/include/asm-x86/apic_64.h
diff --git a/include/asm-x86/apicdef.h b/include/asm-x86/apicdef.h
new file mode 100644
index 00000000000..4542c220bf4
--- /dev/null
+++ b/include/asm-x86/apicdef.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "apicdef_32.h"
+#else
+# include "apicdef_64.h"
+#endif
diff --git a/include/asm-i386/apicdef.h b/include/asm-x86/apicdef_32.h
index 9f6995341fd..9f6995341fd 100644
--- a/include/asm-i386/apicdef.h
+++ b/include/asm-x86/apicdef_32.h
diff --git a/include/asm-x86_64/apicdef.h b/include/asm-x86/apicdef_64.h
index 1dd40067c67..1dd40067c67 100644
--- a/include/asm-x86_64/apicdef.h
+++ b/include/asm-x86/apicdef_64.h
diff --git a/include/asm-i386/arch_hooks.h b/include/asm-x86/arch_hooks.h
index a8c1fca9726..a8c1fca9726 100644
--- a/include/asm-i386/arch_hooks.h
+++ b/include/asm-x86/arch_hooks.h
diff --git a/include/asm-x86/atomic.h b/include/asm-x86/atomic.h
new file mode 100644
index 00000000000..4e1b8873c47
--- /dev/null
+++ b/include/asm-x86/atomic.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "atomic_32.h"
+#else
+# include "atomic_64.h"
+#endif
diff --git a/include/asm-i386/atomic.h b/include/asm-x86/atomic_32.h
index 437aac80171..437aac80171 100644
--- a/include/asm-i386/atomic.h
+++ b/include/asm-x86/atomic_32.h
diff --git a/include/asm-x86_64/atomic.h b/include/asm-x86/atomic_64.h
index f2e64634fa4..f2e64634fa4 100644
--- a/include/asm-x86_64/atomic.h
+++ b/include/asm-x86/atomic_64.h
diff --git a/include/asm-x86/auxvec.h b/include/asm-x86/auxvec.h
new file mode 100644
index 00000000000..7ff866f829c
--- /dev/null
+++ b/include/asm-x86/auxvec.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "auxvec_32.h"
+# else
+# include "auxvec_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "auxvec_32.h"
+# else
+# include "auxvec_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/auxvec.h b/include/asm-x86/auxvec_32.h
index 395e13016bf..395e13016bf 100644
--- a/include/asm-i386/auxvec.h
+++ b/include/asm-x86/auxvec_32.h
diff --git a/include/asm-x86_64/auxvec.h b/include/asm-x86/auxvec_64.h
index 1d5ab0d0395..1d5ab0d0395 100644
--- a/include/asm-x86_64/auxvec.h
+++ b/include/asm-x86/auxvec_64.h
diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h
new file mode 100644
index 00000000000..07e3f6d4fe4
--- /dev/null
+++ b/include/asm-x86/bitops.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "bitops_32.h"
+#else
+# include "bitops_64.h"
+#endif
diff --git a/include/asm-i386/bitops.h b/include/asm-x86/bitops_32.h
index a20fe9822f6..a20fe9822f6 100644
--- a/include/asm-i386/bitops.h
+++ b/include/asm-x86/bitops_32.h
diff --git a/include/asm-x86_64/bitops.h b/include/asm-x86/bitops_64.h
index d4dbbe5f7bd..d4dbbe5f7bd 100644
--- a/include/asm-x86_64/bitops.h
+++ b/include/asm-x86/bitops_64.h
diff --git a/include/asm-i386/boot.h b/include/asm-x86/boot.h
index ed8affbf96c..ed8affbf96c 100644
--- a/include/asm-i386/boot.h
+++ b/include/asm-x86/boot.h
diff --git a/include/asm-i386/bootparam.h b/include/asm-x86/bootparam.h
index b91b01783e4..b91b01783e4 100644
--- a/include/asm-i386/bootparam.h
+++ b/include/asm-x86/bootparam.h
diff --git a/include/asm-x86_64/bootsetup.h b/include/asm-x86/bootsetup.h
index 7b1c3ad155f..7b1c3ad155f 100644
--- a/include/asm-x86_64/bootsetup.h
+++ b/include/asm-x86/bootsetup.h
diff --git a/include/asm-x86/bug.h b/include/asm-x86/bug.h
new file mode 100644
index 00000000000..c655d7f3a5e
--- /dev/null
+++ b/include/asm-x86/bug.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "bug_32.h"
+#else
+# include "bug_64.h"
+#endif
diff --git a/include/asm-i386/bug.h b/include/asm-x86/bug_32.h
index b0fd78ca261..b0fd78ca261 100644
--- a/include/asm-i386/bug.h
+++ b/include/asm-x86/bug_32.h
diff --git a/include/asm-x86_64/bug.h b/include/asm-x86/bug_64.h
index 68260641491..68260641491 100644
--- a/include/asm-x86_64/bug.h
+++ b/include/asm-x86/bug_64.h
diff --git a/include/asm-x86/bugs.h b/include/asm-x86/bugs.h
new file mode 100644
index 00000000000..ddf42d36dd5
--- /dev/null
+++ b/include/asm-x86/bugs.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "bugs_32.h"
+#else
+# include "bugs_64.h"
+#endif
diff --git a/include/asm-i386/bugs.h b/include/asm-x86/bugs_32.h
index d28979ff73b..d28979ff73b 100644
--- a/include/asm-i386/bugs.h
+++ b/include/asm-x86/bugs_32.h
diff --git a/include/asm-x86_64/bugs.h b/include/asm-x86/bugs_64.h
index b33dc04d8f4..b33dc04d8f4 100644
--- a/include/asm-x86_64/bugs.h
+++ b/include/asm-x86/bugs_64.h
diff --git a/include/asm-x86/byteorder.h b/include/asm-x86/byteorder.h
new file mode 100644
index 00000000000..eb14b1870ed
--- /dev/null
+++ b/include/asm-x86/byteorder.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "byteorder_32.h"
+# else
+# include "byteorder_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "byteorder_32.h"
+# else
+# include "byteorder_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/byteorder.h b/include/asm-x86/byteorder_32.h
index a45470a8b74..a45470a8b74 100644
--- a/include/asm-i386/byteorder.h
+++ b/include/asm-x86/byteorder_32.h
diff --git a/include/asm-x86_64/byteorder.h b/include/asm-x86/byteorder_64.h
index 5e86c868c75..5e86c868c75 100644
--- a/include/asm-x86_64/byteorder.h
+++ b/include/asm-x86/byteorder_64.h
diff --git a/include/asm-x86/cache.h b/include/asm-x86/cache.h
new file mode 100644
index 00000000000..c36d190ac9d
--- /dev/null
+++ b/include/asm-x86/cache.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "cache_32.h"
+#else
+# include "cache_64.h"
+#endif
diff --git a/include/asm-i386/cache.h b/include/asm-x86/cache_32.h
index 57c62f41415..57c62f41415 100644
--- a/include/asm-i386/cache.h
+++ b/include/asm-x86/cache_32.h
diff --git a/include/asm-x86_64/cache.h b/include/asm-x86/cache_64.h
index 052df758ae6..052df758ae6 100644
--- a/include/asm-x86_64/cache.h
+++ b/include/asm-x86/cache_64.h
diff --git a/include/asm-x86/cacheflush.h b/include/asm-x86/cacheflush.h
new file mode 100644
index 00000000000..e2df3b55034
--- /dev/null
+++ b/include/asm-x86/cacheflush.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "cacheflush_32.h"
+#else
+# include "cacheflush_64.h"
+#endif
diff --git a/include/asm-i386/cacheflush.h b/include/asm-x86/cacheflush_32.h
index 74e03c8f2e5..74e03c8f2e5 100644
--- a/include/asm-i386/cacheflush.h
+++ b/include/asm-x86/cacheflush_32.h
diff --git a/include/asm-x86_64/cacheflush.h b/include/asm-x86/cacheflush_64.h
index ab1cb5c7dc9..ab1cb5c7dc9 100644
--- a/include/asm-x86_64/cacheflush.h
+++ b/include/asm-x86/cacheflush_64.h
diff --git a/include/asm-x86_64/calgary.h b/include/asm-x86/calgary.h
index 67f60406e2d..67f60406e2d 100644
--- a/include/asm-x86_64/calgary.h
+++ b/include/asm-x86/calgary.h
diff --git a/include/asm-x86_64/calling.h b/include/asm-x86/calling.h
index 6f4f63af96e..6f4f63af96e 100644
--- a/include/asm-x86_64/calling.h
+++ b/include/asm-x86/calling.h
diff --git a/include/asm-x86/checksum.h b/include/asm-x86/checksum.h
new file mode 100644
index 00000000000..848850fd7d6
--- /dev/null
+++ b/include/asm-x86/checksum.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "checksum_32.h"
+#else
+# include "checksum_64.h"
+#endif
diff --git a/include/asm-i386/checksum.h b/include/asm-x86/checksum_32.h
index 75194abbe8e..75194abbe8e 100644
--- a/include/asm-i386/checksum.h
+++ b/include/asm-x86/checksum_32.h
diff --git a/include/asm-x86_64/checksum.h b/include/asm-x86/checksum_64.h
index 419fe88a034..419fe88a034 100644
--- a/include/asm-x86_64/checksum.h
+++ b/include/asm-x86/checksum_64.h
diff --git a/include/asm-x86/cmpxchg.h b/include/asm-x86/cmpxchg.h
new file mode 100644
index 00000000000..a460fa088d4
--- /dev/null
+++ b/include/asm-x86/cmpxchg.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "cmpxchg_32.h"
+#else
+# include "cmpxchg_64.h"
+#endif
diff --git a/include/asm-i386/cmpxchg.h b/include/asm-x86/cmpxchg_32.h
index f86ede28f6d..f86ede28f6d 100644
--- a/include/asm-i386/cmpxchg.h
+++ b/include/asm-x86/cmpxchg_32.h
diff --git a/include/asm-x86_64/cmpxchg.h b/include/asm-x86/cmpxchg_64.h
index 5e182062e6e..5e182062e6e 100644
--- a/include/asm-x86_64/cmpxchg.h
+++ b/include/asm-x86/cmpxchg_64.h
diff --git a/include/asm-x86_64/compat.h b/include/asm-x86/compat.h
index 53cb96b68a6..53cb96b68a6 100644
--- a/include/asm-x86_64/compat.h
+++ b/include/asm-x86/compat.h
diff --git a/include/asm-i386/cpu.h b/include/asm-x86/cpu.h
index 9d914e1e4aa..9d914e1e4aa 100644
--- a/include/asm-i386/cpu.h
+++ b/include/asm-x86/cpu.h
diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
new file mode 100644
index 00000000000..b7160a4598d
--- /dev/null
+++ b/include/asm-x86/cpufeature.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "cpufeature_32.h"
+#else
+# include "cpufeature_64.h"
+#endif
diff --git a/include/asm-i386/cpufeature.h b/include/asm-x86/cpufeature_32.h
index 7b3aa28ebc6..7b3aa28ebc6 100644
--- a/include/asm-i386/cpufeature.h
+++ b/include/asm-x86/cpufeature_32.h
diff --git a/include/asm-x86/cpufeature_64.h b/include/asm-x86/cpufeature_64.h
new file mode 100644
index 00000000000..2983501e8b3
--- /dev/null
+++ b/include/asm-x86/cpufeature_64.h
@@ -0,0 +1,30 @@
+/*
+ * cpufeature_32.h
+ *
+ * Defines x86 CPU feature bits
+ */
+
+#ifndef __ASM_X8664_CPUFEATURE_H
+#define __ASM_X8664_CPUFEATURE_H
+
+#include <asm/cpufeature_32.h>
+
+#undef cpu_has_vme
+#define cpu_has_vme 0
+
+#undef cpu_has_pae
+#define cpu_has_pae ___BUG___
+
+#undef cpu_has_mp
+#define cpu_has_mp 1 /* XXX */
+
+#undef cpu_has_k6_mtrr
+#define cpu_has_k6_mtrr 0
+
+#undef cpu_has_cyrix_arr
+#define cpu_has_cyrix_arr 0
+
+#undef cpu_has_centaur_mcr
+#define cpu_has_centaur_mcr 0
+
+#endif /* __ASM_X8664_CPUFEATURE_H */
diff --git a/include/asm-x86/cputime.h b/include/asm-x86/cputime.h
new file mode 100644
index 00000000000..87c37cf6b70
--- /dev/null
+++ b/include/asm-x86/cputime.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "cputime_32.h"
+#else
+# include "cputime_64.h"
+#endif
diff --git a/include/asm-i386/cputime.h b/include/asm-x86/cputime_32.h
index 398ed7cd171..398ed7cd171 100644
--- a/include/asm-i386/cputime.h
+++ b/include/asm-x86/cputime_32.h
diff --git a/include/asm-x86_64/cputime.h b/include/asm-x86/cputime_64.h
index a07012dc5a3..a07012dc5a3 100644
--- a/include/asm-x86_64/cputime.h
+++ b/include/asm-x86/cputime_64.h
diff --git a/include/asm-x86/current.h b/include/asm-x86/current.h
new file mode 100644
index 00000000000..d2526d3f734
--- /dev/null
+++ b/include/asm-x86/current.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "current_32.h"
+#else
+# include "current_64.h"
+#endif
diff --git a/include/asm-i386/current.h b/include/asm-x86/current_32.h
index d3524853991..d3524853991 100644
--- a/include/asm-i386/current.h
+++ b/include/asm-x86/current_32.h
diff --git a/include/asm-x86_64/current.h b/include/asm-x86/current_64.h
index bc8adecee66..bc8adecee66 100644
--- a/include/asm-x86_64/current.h
+++ b/include/asm-x86/current_64.h
diff --git a/include/asm-x86/debugreg.h b/include/asm-x86/debugreg.h
new file mode 100644
index 00000000000..b6ce7e4fa00
--- /dev/null
+++ b/include/asm-x86/debugreg.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "debugreg_32.h"
+# else
+# include "debugreg_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "debugreg_32.h"
+# else
+# include "debugreg_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/debugreg.h b/include/asm-x86/debugreg_32.h
index f0b2b06ae0f..f0b2b06ae0f 100644
--- a/include/asm-i386/debugreg.h
+++ b/include/asm-x86/debugreg_32.h
diff --git a/include/asm-x86_64/debugreg.h b/include/asm-x86/debugreg_64.h
index bd1aab1d8c4..bd1aab1d8c4 100644
--- a/include/asm-x86_64/debugreg.h
+++ b/include/asm-x86/debugreg_64.h
diff --git a/include/asm-x86/delay.h b/include/asm-x86/delay.h
new file mode 100644
index 00000000000..10f2c71d622
--- /dev/null
+++ b/include/asm-x86/delay.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "delay_32.h"
+#else
+# include "delay_64.h"
+#endif
diff --git a/include/asm-i386/delay.h b/include/asm-x86/delay_32.h
index 9ae5e3782ed..9ae5e3782ed 100644
--- a/include/asm-i386/delay.h
+++ b/include/asm-x86/delay_32.h
diff --git a/include/asm-x86_64/delay.h b/include/asm-x86/delay_64.h
index c2669f1f552..c2669f1f552 100644
--- a/include/asm-x86_64/delay.h
+++ b/include/asm-x86/delay_64.h
diff --git a/include/asm-x86/desc.h b/include/asm-x86/desc.h
new file mode 100644
index 00000000000..6065c509226
--- /dev/null
+++ b/include/asm-x86/desc.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "desc_32.h"
+#else
+# include "desc_64.h"
+#endif
diff --git a/include/asm-i386/desc.h b/include/asm-x86/desc_32.h
index c547403f341..c547403f341 100644
--- a/include/asm-i386/desc.h
+++ b/include/asm-x86/desc_32.h
diff --git a/include/asm-x86_64/desc.h b/include/asm-x86/desc_64.h
index ac991b5ca0f..ac991b5ca0f 100644
--- a/include/asm-x86_64/desc.h
+++ b/include/asm-x86/desc_64.h
diff --git a/include/asm-x86_64/desc_defs.h b/include/asm-x86/desc_defs.h
index 08900407009..08900407009 100644
--- a/include/asm-x86_64/desc_defs.h
+++ b/include/asm-x86/desc_defs.h
diff --git a/include/asm-x86/device.h b/include/asm-x86/device.h
new file mode 100644
index 00000000000..e2bcf7c7dce
--- /dev/null
+++ b/include/asm-x86/device.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "device_32.h"
+#else
+# include "device_64.h"
+#endif
diff --git a/include/asm-i386/device.h b/include/asm-x86/device_32.h
index 849604c70e6..849604c70e6 100644
--- a/include/asm-i386/device.h
+++ b/include/asm-x86/device_32.h
diff --git a/include/asm-x86_64/device.h b/include/asm-x86/device_64.h
index 3afa03f33a3..3afa03f33a3 100644
--- a/include/asm-x86_64/device.h
+++ b/include/asm-x86/device_64.h
diff --git a/include/asm-x86/div64.h b/include/asm-x86/div64.h
new file mode 100644
index 00000000000..8ac7da6ca28
--- /dev/null
+++ b/include/asm-x86/div64.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "div64_32.h"
+#else
+# include "div64_64.h"
+#endif
diff --git a/include/asm-i386/div64.h b/include/asm-x86/div64_32.h
index 438e980068b..438e980068b 100644
--- a/include/asm-i386/div64.h
+++ b/include/asm-x86/div64_32.h
diff --git a/include/asm-x86_64/div64.h b/include/asm-x86/div64_64.h
index 6cd978cefb2..6cd978cefb2 100644
--- a/include/asm-x86_64/div64.h
+++ b/include/asm-x86/div64_64.h
diff --git a/include/asm-x86/dma-mapping.h b/include/asm-x86/dma-mapping.h
new file mode 100644
index 00000000000..58f790f4df5
--- /dev/null
+++ b/include/asm-x86/dma-mapping.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "dma-mapping_32.h"
+#else
+# include "dma-mapping_64.h"
+#endif
diff --git a/include/asm-i386/dma-mapping.h b/include/asm-x86/dma-mapping_32.h
index f1d72d177f6..f1d72d177f6 100644
--- a/include/asm-i386/dma-mapping.h
+++ b/include/asm-x86/dma-mapping_32.h
diff --git a/include/asm-x86_64/dma-mapping.h b/include/asm-x86/dma-mapping_64.h
index 6897e2a436e..6897e2a436e 100644
--- a/include/asm-x86_64/dma-mapping.h
+++ b/include/asm-x86/dma-mapping_64.h
diff --git a/include/asm-x86/dma.h b/include/asm-x86/dma.h
new file mode 100644
index 00000000000..9f936c61a4e
--- /dev/null
+++ b/include/asm-x86/dma.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "dma_32.h"
+#else
+# include "dma_64.h"
+#endif
diff --git a/include/asm-i386/dma.h b/include/asm-x86/dma_32.h
index d23aac8e1a5..d23aac8e1a5 100644
--- a/include/asm-i386/dma.h
+++ b/include/asm-x86/dma_32.h
diff --git a/include/asm-x86_64/dma.h b/include/asm-x86/dma_64.h
index a37c16f0628..a37c16f0628 100644
--- a/include/asm-x86_64/dma.h
+++ b/include/asm-x86/dma_64.h
diff --git a/include/asm-x86/dmi.h b/include/asm-x86/dmi.h
new file mode 100644
index 00000000000..c9e4e8ebc27
--- /dev/null
+++ b/include/asm-x86/dmi.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "dmi_32.h"
+#else
+# include "dmi_64.h"
+#endif
diff --git a/include/asm-i386/dmi.h b/include/asm-x86/dmi_32.h
index 38d4eeb7fc7..38d4eeb7fc7 100644
--- a/include/asm-i386/dmi.h
+++ b/include/asm-x86/dmi_32.h
diff --git a/include/asm-x86_64/dmi.h b/include/asm-x86/dmi_64.h
index d02e32e3c3f..d02e32e3c3f 100644
--- a/include/asm-x86_64/dmi.h
+++ b/include/asm-x86/dmi_64.h
diff --git a/include/asm-x86/dwarf2.h b/include/asm-x86/dwarf2.h
new file mode 100644
index 00000000000..b3cbb0ccae1
--- /dev/null
+++ b/include/asm-x86/dwarf2.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "dwarf2_32.h"
+#else
+# include "dwarf2_64.h"
+#endif
diff --git a/include/asm-i386/dwarf2.h b/include/asm-x86/dwarf2_32.h
index 6d66398a307..6d66398a307 100644
--- a/include/asm-i386/dwarf2.h
+++ b/include/asm-x86/dwarf2_32.h
diff --git a/include/asm-x86_64/dwarf2.h b/include/asm-x86/dwarf2_64.h
index eedc08526b0..eedc08526b0 100644
--- a/include/asm-x86_64/dwarf2.h
+++ b/include/asm-x86/dwarf2_64.h
diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h
new file mode 100644
index 00000000000..5d4d2183e5d
--- /dev/null
+++ b/include/asm-x86/e820.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "e820_32.h"
+#else
+# include "e820_64.h"
+#endif
diff --git a/include/asm-i386/e820.h b/include/asm-x86/e820_32.h
index cf67dbb1db7..cf67dbb1db7 100644
--- a/include/asm-i386/e820.h
+++ b/include/asm-x86/e820_32.h
diff --git a/include/asm-x86_64/e820.h b/include/asm-x86/e820_64.h
index 3486e701bd8..3486e701bd8 100644
--- a/include/asm-x86_64/e820.h
+++ b/include/asm-x86/e820_64.h
diff --git a/include/asm-x86/edac.h b/include/asm-x86/edac.h
new file mode 100644
index 00000000000..f8b888e140b
--- /dev/null
+++ b/include/asm-x86/edac.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "edac_32.h"
+#else
+# include "edac_64.h"
+#endif
diff --git a/include/asm-i386/edac.h b/include/asm-x86/edac_32.h
index 3e7dd0ab68c..3e7dd0ab68c 100644
--- a/include/asm-i386/edac.h
+++ b/include/asm-x86/edac_32.h
diff --git a/include/asm-x86_64/edac.h b/include/asm-x86/edac_64.h
index cad1cd42b4e..cad1cd42b4e 100644
--- a/include/asm-x86_64/edac.h
+++ b/include/asm-x86/edac_64.h
diff --git a/include/asm-x86/elf.h b/include/asm-x86/elf.h
new file mode 100644
index 00000000000..ed6bb6e546b
--- /dev/null
+++ b/include/asm-x86/elf.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "elf_32.h"
+# else
+# include "elf_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "elf_32.h"
+# else
+# include "elf_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/elf.h b/include/asm-x86/elf_32.h
index b32df3a332d..b32df3a332d 100644
--- a/include/asm-i386/elf.h
+++ b/include/asm-x86/elf_32.h
diff --git a/include/asm-x86_64/elf.h b/include/asm-x86/elf_64.h
index b4fbe47f6cc..b4fbe47f6cc 100644
--- a/include/asm-x86_64/elf.h
+++ b/include/asm-x86/elf_64.h
diff --git a/include/asm-i386/emergency-restart.h b/include/asm-x86/emergency-restart.h
index 680c3956334..680c3956334 100644
--- a/include/asm-i386/emergency-restart.h
+++ b/include/asm-x86/emergency-restart.h
diff --git a/include/asm-x86/errno.h b/include/asm-x86/errno.h
new file mode 100644
index 00000000000..9d511be8e57
--- /dev/null
+++ b/include/asm-x86/errno.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "errno_32.h"
+# else
+# include "errno_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "errno_32.h"
+# else
+# include "errno_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/errno.h b/include/asm-x86/errno_32.h
index 969b3437472..969b3437472 100644
--- a/include/asm-i386/errno.h
+++ b/include/asm-x86/errno_32.h
diff --git a/include/asm-x86_64/errno.h b/include/asm-x86/errno_64.h
index 311182129e3..311182129e3 100644
--- a/include/asm-x86_64/errno.h
+++ b/include/asm-x86/errno_64.h
diff --git a/include/asm-x86/fb.h b/include/asm-x86/fb.h
new file mode 100644
index 00000000000..238c7ca4587
--- /dev/null
+++ b/include/asm-x86/fb.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "fb_32.h"
+#else
+# include "fb_64.h"
+#endif
diff --git a/include/asm-i386/fb.h b/include/asm-x86/fb_32.h
index d1c6297d4a6..d1c6297d4a6 100644
--- a/include/asm-i386/fb.h
+++ b/include/asm-x86/fb_32.h
diff --git a/include/asm-x86_64/fb.h b/include/asm-x86/fb_64.h
index 60548e651d1..60548e651d1 100644
--- a/include/asm-x86_64/fb.h
+++ b/include/asm-x86/fb_64.h
diff --git a/include/asm-i386/fcntl.h b/include/asm-x86/fcntl.h
index 46ab12db573..46ab12db573 100644
--- a/include/asm-i386/fcntl.h
+++ b/include/asm-x86/fcntl.h
diff --git a/include/asm-x86/fixmap.h b/include/asm-x86/fixmap.h
new file mode 100644
index 00000000000..382eb271a89
--- /dev/null
+++ b/include/asm-x86/fixmap.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "fixmap_32.h"
+#else
+# include "fixmap_64.h"
+#endif
diff --git a/include/asm-i386/fixmap.h b/include/asm-x86/fixmap_32.h
index 249e753ac80..249e753ac80 100644
--- a/include/asm-i386/fixmap.h
+++ b/include/asm-x86/fixmap_32.h
diff --git a/include/asm-x86_64/fixmap.h b/include/asm-x86/fixmap_64.h
index cdfbe4a6ae6..cdfbe4a6ae6 100644
--- a/include/asm-x86_64/fixmap.h
+++ b/include/asm-x86/fixmap_64.h
diff --git a/include/asm-x86/floppy.h b/include/asm-x86/floppy.h
new file mode 100644
index 00000000000..aecbb6dca21
--- /dev/null
+++ b/include/asm-x86/floppy.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "floppy_32.h"
+#else
+# include "floppy_64.h"
+#endif
diff --git a/include/asm-i386/floppy.h b/include/asm-x86/floppy_32.h
index 44ef2f55a8e..44ef2f55a8e 100644
--- a/include/asm-i386/floppy.h
+++ b/include/asm-x86/floppy_32.h
diff --git a/include/asm-x86_64/floppy.h b/include/asm-x86/floppy_64.h
index 6ea13c3806f..6ea13c3806f 100644
--- a/include/asm-x86_64/floppy.h
+++ b/include/asm-x86/floppy_64.h
diff --git a/include/asm-x86_64/fpu32.h b/include/asm-x86/fpu32.h
index 4153db5c0c3..4153db5c0c3 100644
--- a/include/asm-x86_64/fpu32.h
+++ b/include/asm-x86/fpu32.h
diff --git a/include/asm-i386/frame.i b/include/asm-x86/frame.i
index 03620251ae1..03620251ae1 100644
--- a/include/asm-i386/frame.i
+++ b/include/asm-x86/frame.i
diff --git a/include/asm-x86/futex.h b/include/asm-x86/futex.h
new file mode 100644
index 00000000000..1f4610e0c61
--- /dev/null
+++ b/include/asm-x86/futex.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "futex_32.h"
+#else
+# include "futex_64.h"
+#endif
diff --git a/include/asm-i386/futex.h b/include/asm-x86/futex_32.h
index 438ef0ec710..438ef0ec710 100644
--- a/include/asm-i386/futex.h
+++ b/include/asm-x86/futex_32.h
diff --git a/include/asm-x86_64/futex.h b/include/asm-x86/futex_64.h
index 5cdfb08013c..5cdfb08013c 100644
--- a/include/asm-x86_64/futex.h
+++ b/include/asm-x86/futex_64.h
diff --git a/include/asm-x86/genapic.h b/include/asm-x86/genapic.h
new file mode 100644
index 00000000000..d48bee663a6
--- /dev/null
+++ b/include/asm-x86/genapic.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "genapic_32.h"
+#else
+# include "genapic_64.h"
+#endif
diff --git a/include/asm-i386/genapic.h b/include/asm-x86/genapic_32.h
index 33e3ffe1766..33e3ffe1766 100644
--- a/include/asm-i386/genapic.h
+++ b/include/asm-x86/genapic_32.h
diff --git a/include/asm-x86_64/genapic.h b/include/asm-x86/genapic_64.h
index d7e516ccbaa..d7e516ccbaa 100644
--- a/include/asm-x86_64/genapic.h
+++ b/include/asm-x86/genapic_64.h
diff --git a/include/asm-i386/geode.h b/include/asm-x86/geode.h
index 6da4bbbea3d..6da4bbbea3d 100644
--- a/include/asm-i386/geode.h
+++ b/include/asm-x86/geode.h
diff --git a/include/asm-x86/hardirq.h b/include/asm-x86/hardirq.h
new file mode 100644
index 00000000000..314434d664e
--- /dev/null
+++ b/include/asm-x86/hardirq.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "hardirq_32.h"
+#else
+# include "hardirq_64.h"
+#endif
diff --git a/include/asm-i386/hardirq.h b/include/asm-x86/hardirq_32.h
index 0e358dc405f..0e358dc405f 100644
--- a/include/asm-i386/hardirq.h
+++ b/include/asm-x86/hardirq_32.h
diff --git a/include/asm-x86_64/hardirq.h b/include/asm-x86/hardirq_64.h
index 95d5e090ed8..95d5e090ed8 100644
--- a/include/asm-x86_64/hardirq.h
+++ b/include/asm-x86/hardirq_64.h
diff --git a/include/asm-i386/highmem.h b/include/asm-x86/highmem.h
index 13cdcd66fff..13cdcd66fff 100644
--- a/include/asm-i386/highmem.h
+++ b/include/asm-x86/highmem.h
diff --git a/include/asm-x86/hpet.h b/include/asm-x86/hpet.h
new file mode 100644
index 00000000000..9eff4860125
--- /dev/null
+++ b/include/asm-x86/hpet.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "hpet_32.h"
+#else
+# include "hpet_64.h"
+#endif
diff --git a/include/asm-i386/hpet.h b/include/asm-x86/hpet_32.h
index c82dc7ed96b..c82dc7ed96b 100644
--- a/include/asm-i386/hpet.h
+++ b/include/asm-x86/hpet_32.h
diff --git a/include/asm-x86/hpet_64.h b/include/asm-x86/hpet_64.h
new file mode 100644
index 00000000000..fd4decac93a
--- /dev/null
+++ b/include/asm-x86/hpet_64.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X8664_HPET_H
+#define _ASM_X8664_HPET_H 1
+
+#include <asm/hpet_32.h>
+
+#define HPET_TICK_RATE (HZ * 100000UL)
+
+extern int hpet_rtc_timer_init(void);
+extern int hpet_arch_init(void);
+extern int hpet_timer_stop_set_go(unsigned long tick);
+extern int hpet_reenable(void);
+extern unsigned int hpet_calibrate_tsc(void);
+
+extern int hpet_use_timer;
+extern unsigned long hpet_period;
+extern unsigned long hpet_tick;
+
+#endif
diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h
new file mode 100644
index 00000000000..bf025399d93
--- /dev/null
+++ b/include/asm-x86/hw_irq.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "hw_irq_32.h"
+#else
+# include "hw_irq_64.h"
+#endif
diff --git a/include/asm-i386/hw_irq.h b/include/asm-x86/hw_irq_32.h
index 0bedbdf5e90..0bedbdf5e90 100644
--- a/include/asm-i386/hw_irq.h
+++ b/include/asm-x86/hw_irq_32.h
diff --git a/include/asm-x86_64/hw_irq.h b/include/asm-x86/hw_irq_64.h
index 09dfc18a6dd..09dfc18a6dd 100644
--- a/include/asm-x86_64/hw_irq.h
+++ b/include/asm-x86/hw_irq_64.h
diff --git a/include/asm-i386/hypertransport.h b/include/asm-x86/hypertransport.h
index c16c6ff4bdd..c16c6ff4bdd 100644
--- a/include/asm-i386/hypertransport.h
+++ b/include/asm-x86/hypertransport.h
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
new file mode 100644
index 00000000000..a8bbed34966
--- /dev/null
+++ b/include/asm-x86/i387.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "i387_32.h"
+#else
+# include "i387_64.h"
+#endif
diff --git a/include/asm-i386/i387.h b/include/asm-x86/i387_32.h
index cdd1e248e3b..cdd1e248e3b 100644
--- a/include/asm-i386/i387.h
+++ b/include/asm-x86/i387_32.h
diff --git a/include/asm-x86_64/i387.h b/include/asm-x86/i387_64.h
index 0217b74cc9f..0217b74cc9f 100644
--- a/include/asm-x86_64/i387.h
+++ b/include/asm-x86/i387_64.h
diff --git a/include/asm-x86/i8253.h b/include/asm-x86/i8253.h
new file mode 100644
index 00000000000..b2a4f995a33
--- /dev/null
+++ b/include/asm-x86/i8253.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "i8253_32.h"
+#else
+# include "i8253_64.h"
+#endif
diff --git a/include/asm-i386/i8253.h b/include/asm-x86/i8253_32.h
index 7577d058d86..7577d058d86 100644
--- a/include/asm-i386/i8253.h
+++ b/include/asm-x86/i8253_32.h
diff --git a/include/asm-x86_64/i8253.h b/include/asm-x86/i8253_64.h
index 015d8df0769..015d8df0769 100644
--- a/include/asm-x86_64/i8253.h
+++ b/include/asm-x86/i8253_64.h
diff --git a/include/asm-i386/i8259.h b/include/asm-x86/i8259.h
index 29d8f9a6b3f..29d8f9a6b3f 100644
--- a/include/asm-i386/i8259.h
+++ b/include/asm-x86/i8259.h
diff --git a/include/asm-x86_64/ia32.h b/include/asm-x86/ia32.h
index 0190b7c4e31..0190b7c4e31 100644
--- a/include/asm-x86_64/ia32.h
+++ b/include/asm-x86/ia32.h
diff --git a/include/asm-x86_64/ia32_unistd.h b/include/asm-x86/ia32_unistd.h
index 5b52ce50733..5b52ce50733 100644
--- a/include/asm-x86_64/ia32_unistd.h
+++ b/include/asm-x86/ia32_unistd.h
diff --git a/include/asm-i386/ide.h b/include/asm-x86/ide.h
index e7817a3d657..e7817a3d657 100644
--- a/include/asm-i386/ide.h
+++ b/include/asm-x86/ide.h
diff --git a/include/asm-x86_64/idle.h b/include/asm-x86/idle.h
index 6bd47dcf206..6bd47dcf206 100644
--- a/include/asm-x86_64/idle.h
+++ b/include/asm-x86/idle.h
diff --git a/include/asm-x86/intel_arch_perfmon.h b/include/asm-x86/intel_arch_perfmon.h
new file mode 100644
index 00000000000..4f6d4e6bf57
--- /dev/null
+++ b/include/asm-x86/intel_arch_perfmon.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "intel_arch_perfmon_32.h"
+#else
+# include "intel_arch_perfmon_64.h"
+#endif
diff --git a/include/asm-i386/intel_arch_perfmon.h b/include/asm-x86/intel_arch_perfmon_32.h
index b52cd60a075..b52cd60a075 100644
--- a/include/asm-i386/intel_arch_perfmon.h
+++ b/include/asm-x86/intel_arch_perfmon_32.h
diff --git a/include/asm-x86_64/intel_arch_perfmon.h b/include/asm-x86/intel_arch_perfmon_64.h
index 8633331420e..8633331420e 100644
--- a/include/asm-x86_64/intel_arch_perfmon.h
+++ b/include/asm-x86/intel_arch_perfmon_64.h
diff --git a/include/asm-x86/io.h b/include/asm-x86/io.h
new file mode 100644
index 00000000000..5a58b176dd6
--- /dev/null
+++ b/include/asm-x86/io.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "io_32.h"
+#else
+# include "io_64.h"
+#endif
diff --git a/include/asm-i386/io.h b/include/asm-x86/io_32.h
index e8e0bd64112..e8e0bd64112 100644
--- a/include/asm-i386/io.h
+++ b/include/asm-x86/io_32.h
diff --git a/include/asm-x86_64/io.h b/include/asm-x86/io_64.h
index 7475095c506..7475095c506 100644
--- a/include/asm-x86_64/io.h
+++ b/include/asm-x86/io_64.h
diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h
new file mode 100644
index 00000000000..88494966bee
--- /dev/null
+++ b/include/asm-x86/io_apic.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "io_apic_32.h"
+#else
+# include "io_apic_64.h"
+#endif
diff --git a/include/asm-i386/io_apic.h b/include/asm-x86/io_apic_32.h
index dbe734ddf2a..dbe734ddf2a 100644
--- a/include/asm-i386/io_apic.h
+++ b/include/asm-x86/io_apic_32.h
diff --git a/include/asm-x86_64/io_apic.h b/include/asm-x86/io_apic_64.h
index d9f2e54324d..d9f2e54324d 100644
--- a/include/asm-x86_64/io_apic.h
+++ b/include/asm-x86/io_apic_64.h
diff --git a/include/asm-i386/ioctl.h b/include/asm-x86/ioctl.h
index b279fe06dfe..b279fe06dfe 100644
--- a/include/asm-i386/ioctl.h
+++ b/include/asm-x86/ioctl.h
diff --git a/include/asm-x86/ioctls.h b/include/asm-x86/ioctls.h
new file mode 100644
index 00000000000..1e0fd48f18b
--- /dev/null
+++ b/include/asm-x86/ioctls.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "ioctls_32.h"
+# else
+# include "ioctls_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "ioctls_32.h"
+# else
+# include "ioctls_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/ioctls.h b/include/asm-x86/ioctls_32.h
index ef5878762dc..ef5878762dc 100644
--- a/include/asm-i386/ioctls.h
+++ b/include/asm-x86/ioctls_32.h
diff --git a/include/asm-x86_64/ioctls.h b/include/asm-x86/ioctls_64.h
index 3fc0b15a0d7..3fc0b15a0d7 100644
--- a/include/asm-x86_64/ioctls.h
+++ b/include/asm-x86/ioctls_64.h
diff --git a/include/asm-x86_64/iommu.h b/include/asm-x86/iommu.h
index 5af471f228e..5af471f228e 100644
--- a/include/asm-x86_64/iommu.h
+++ b/include/asm-x86/iommu.h
diff --git a/include/asm-i386/ipc.h b/include/asm-x86/ipc.h
index a46e3d9c2a3..a46e3d9c2a3 100644
--- a/include/asm-i386/ipc.h
+++ b/include/asm-x86/ipc.h
diff --git a/include/asm-x86/ipcbuf.h b/include/asm-x86/ipcbuf.h
new file mode 100644
index 00000000000..eb2e448c6e2
--- /dev/null
+++ b/include/asm-x86/ipcbuf.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "ipcbuf_32.h"
+# else
+# include "ipcbuf_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "ipcbuf_32.h"
+# else
+# include "ipcbuf_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/ipcbuf.h b/include/asm-x86/ipcbuf_32.h
index 0dcad4f84c2..0dcad4f84c2 100644
--- a/include/asm-i386/ipcbuf.h
+++ b/include/asm-x86/ipcbuf_32.h
diff --git a/include/asm-x86_64/ipcbuf.h b/include/asm-x86/ipcbuf_64.h
index 470cf85e3ba..470cf85e3ba 100644
--- a/include/asm-x86_64/ipcbuf.h
+++ b/include/asm-x86/ipcbuf_64.h
diff --git a/include/asm-x86_64/ipi.h b/include/asm-x86/ipi.h
index a7c75ea408a..a7c75ea408a 100644
--- a/include/asm-x86_64/ipi.h
+++ b/include/asm-x86/ipi.h
diff --git a/include/asm-x86/irq.h b/include/asm-x86/irq.h
new file mode 100644
index 00000000000..7ba905465a5
--- /dev/null
+++ b/include/asm-x86/irq.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "irq_32.h"
+#else
+# include "irq_64.h"
+#endif
diff --git a/include/asm-i386/irq.h b/include/asm-x86/irq_32.h
index 36f310632c4..36f310632c4 100644
--- a/include/asm-i386/irq.h
+++ b/include/asm-x86/irq_32.h
diff --git a/include/asm-x86_64/irq.h b/include/asm-x86/irq_64.h
index 5006c6e7565..5006c6e7565 100644
--- a/include/asm-x86_64/irq.h
+++ b/include/asm-x86/irq_64.h
diff --git a/include/asm-x86/irq_regs.h b/include/asm-x86/irq_regs.h
new file mode 100644
index 00000000000..89c898ab298
--- /dev/null
+++ b/include/asm-x86/irq_regs.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "irq_regs_32.h"
+#else
+# include "irq_regs_64.h"
+#endif
diff --git a/include/asm-i386/irq_regs.h b/include/asm-x86/irq_regs_32.h
index 3368b20c0b4..3368b20c0b4 100644
--- a/include/asm-i386/irq_regs.h
+++ b/include/asm-x86/irq_regs_32.h
diff --git a/include/asm-x86_64/irq_regs.h b/include/asm-x86/irq_regs_64.h
index 3dd9c0b7027..3dd9c0b7027 100644
--- a/include/asm-x86_64/irq_regs.h
+++ b/include/asm-x86/irq_regs_64.h
diff --git a/include/asm-x86/irqflags.h b/include/asm-x86/irqflags.h
new file mode 100644
index 00000000000..1b695ff5268
--- /dev/null
+++ b/include/asm-x86/irqflags.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "irqflags_32.h"
+#else
+# include "irqflags_64.h"
+#endif
diff --git a/include/asm-i386/irqflags.h b/include/asm-x86/irqflags_32.h
index eff8585cb74..eff8585cb74 100644
--- a/include/asm-i386/irqflags.h
+++ b/include/asm-x86/irqflags_32.h
diff --git a/include/asm-x86_64/irqflags.h b/include/asm-x86/irqflags_64.h
index 86e70fe2365..86e70fe2365 100644
--- a/include/asm-x86_64/irqflags.h
+++ b/include/asm-x86/irqflags_64.h
diff --git a/include/asm-i386/ist.h b/include/asm-x86/ist.h
index ef2003ebc6f..ef2003ebc6f 100644
--- a/include/asm-i386/ist.h
+++ b/include/asm-x86/ist.h
diff --git a/include/asm-x86_64/k8.h b/include/asm-x86/k8.h
index 699dd6961ed..699dd6961ed 100644
--- a/include/asm-x86_64/k8.h
+++ b/include/asm-x86/k8.h
diff --git a/include/asm-x86/kdebug.h b/include/asm-x86/kdebug.h
new file mode 100644
index 00000000000..38479106c25
--- /dev/null
+++ b/include/asm-x86/kdebug.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "kdebug_32.h"
+#else
+# include "kdebug_64.h"
+#endif
diff --git a/include/asm-i386/kdebug.h b/include/asm-x86/kdebug_32.h
index a185b5f73e7..a185b5f73e7 100644
--- a/include/asm-i386/kdebug.h
+++ b/include/asm-x86/kdebug_32.h
diff --git a/include/asm-x86_64/kdebug.h b/include/asm-x86/kdebug_64.h
index d7e2bcf49e4..d7e2bcf49e4 100644
--- a/include/asm-x86_64/kdebug.h
+++ b/include/asm-x86/kdebug_64.h
diff --git a/include/asm-x86/kexec.h b/include/asm-x86/kexec.h
new file mode 100644
index 00000000000..718ddbfb951
--- /dev/null
+++ b/include/asm-x86/kexec.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "kexec_32.h"
+#else
+# include "kexec_64.h"
+#endif
diff --git a/include/asm-i386/kexec.h b/include/asm-x86/kexec_32.h
index 4b9dc9e6b70..4b9dc9e6b70 100644
--- a/include/asm-i386/kexec.h
+++ b/include/asm-x86/kexec_32.h
diff --git a/include/asm-x86_64/kexec.h b/include/asm-x86/kexec_64.h
index 738e581b67f..738e581b67f 100644
--- a/include/asm-x86_64/kexec.h
+++ b/include/asm-x86/kexec_64.h
diff --git a/include/asm-x86/kmap_types.h b/include/asm-x86/kmap_types.h
new file mode 100644
index 00000000000..e4ec724b298
--- /dev/null
+++ b/include/asm-x86/kmap_types.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "kmap_types_32.h"
+#else
+# include "kmap_types_64.h"
+#endif
diff --git a/include/asm-i386/kmap_types.h b/include/asm-x86/kmap_types_32.h
index 806aae3c533..806aae3c533 100644
--- a/include/asm-i386/kmap_types.h
+++ b/include/asm-x86/kmap_types_32.h
diff --git a/include/asm-x86_64/kmap_types.h b/include/asm-x86/kmap_types_64.h
index 7486338c6ce..7486338c6ce 100644
--- a/include/asm-x86_64/kmap_types.h
+++ b/include/asm-x86/kmap_types_64.h
diff --git a/include/asm-x86/kprobes.h b/include/asm-x86/kprobes.h
new file mode 100644
index 00000000000..b7bbd25ba2a
--- /dev/null
+++ b/include/asm-x86/kprobes.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "kprobes_32.h"
+#else
+# include "kprobes_64.h"
+#endif
diff --git a/include/asm-i386/kprobes.h b/include/asm-x86/kprobes_32.h
index 06f7303c30c..06f7303c30c 100644
--- a/include/asm-i386/kprobes.h
+++ b/include/asm-x86/kprobes_32.h
diff --git a/include/asm-x86_64/kprobes.h b/include/asm-x86/kprobes_64.h
index 7db825403e0..7db825403e0 100644
--- a/include/asm-x86_64/kprobes.h
+++ b/include/asm-x86/kprobes_64.h
diff --git a/include/asm-x86/ldt.h b/include/asm-x86/ldt.h
new file mode 100644
index 00000000000..3d9cc20d2ba
--- /dev/null
+++ b/include/asm-x86/ldt.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "ldt_32.h"
+# else
+# include "ldt_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "ldt_32.h"
+# else
+# include "ldt_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/ldt.h b/include/asm-x86/ldt_32.h
index e9d3de1dee6..e9d3de1dee6 100644
--- a/include/asm-i386/ldt.h
+++ b/include/asm-x86/ldt_32.h
diff --git a/include/asm-x86_64/ldt.h b/include/asm-x86/ldt_64.h
index 9ef647b890d..9ef647b890d 100644
--- a/include/asm-x86_64/ldt.h
+++ b/include/asm-x86/ldt_64.h
diff --git a/include/asm-x86/linkage.h b/include/asm-x86/linkage.h
new file mode 100644
index 00000000000..94b257fa870
--- /dev/null
+++ b/include/asm-x86/linkage.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "linkage_32.h"
+#else
+# include "linkage_64.h"
+#endif
diff --git a/include/asm-i386/linkage.h b/include/asm-x86/linkage_32.h
index f4a6ebac024..f4a6ebac024 100644
--- a/include/asm-i386/linkage.h
+++ b/include/asm-x86/linkage_32.h
diff --git a/include/asm-x86_64/linkage.h b/include/asm-x86/linkage_64.h
index b5f39d0189c..b5f39d0189c 100644
--- a/include/asm-x86_64/linkage.h
+++ b/include/asm-x86/linkage_64.h
diff --git a/include/asm-x86/local.h b/include/asm-x86/local.h
new file mode 100644
index 00000000000..c7a1b1c66c9
--- /dev/null
+++ b/include/asm-x86/local.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "local_32.h"
+#else
+# include "local_64.h"
+#endif
diff --git a/include/asm-i386/local.h b/include/asm-x86/local_32.h
index 6e85975b9ed..6e85975b9ed 100644
--- a/include/asm-i386/local.h
+++ b/include/asm-x86/local_32.h
diff --git a/include/asm-x86_64/local.h b/include/asm-x86/local_64.h
index e87492bb069..e87492bb069 100644
--- a/include/asm-x86_64/local.h
+++ b/include/asm-x86/local_64.h
diff --git a/include/asm-i386/mach-bigsmp/mach_apic.h b/include/asm-x86/mach-bigsmp/mach_apic.h
index ebd319f838a..ebd319f838a 100644
--- a/include/asm-i386/mach-bigsmp/mach_apic.h
+++ b/include/asm-x86/mach-bigsmp/mach_apic.h
diff --git a/include/asm-i386/mach-bigsmp/mach_apicdef.h b/include/asm-x86/mach-bigsmp/mach_apicdef.h
index a58ab5a75c8..a58ab5a75c8 100644
--- a/include/asm-i386/mach-bigsmp/mach_apicdef.h
+++ b/include/asm-x86/mach-bigsmp/mach_apicdef.h
diff --git a/include/asm-i386/mach-bigsmp/mach_ipi.h b/include/asm-x86/mach-bigsmp/mach_ipi.h
index 9404c535b7e..9404c535b7e 100644
--- a/include/asm-i386/mach-bigsmp/mach_ipi.h
+++ b/include/asm-x86/mach-bigsmp/mach_ipi.h
diff --git a/include/asm-i386/mach-bigsmp/mach_mpspec.h b/include/asm-x86/mach-bigsmp/mach_mpspec.h
index 6b5dadcf1d0..6b5dadcf1d0 100644
--- a/include/asm-i386/mach-bigsmp/mach_mpspec.h
+++ b/include/asm-x86/mach-bigsmp/mach_mpspec.h
diff --git a/include/asm-i386/mach-default/apm.h b/include/asm-x86/mach-default/apm.h
index 1f730b8bd1f..1f730b8bd1f 100644
--- a/include/asm-i386/mach-default/apm.h
+++ b/include/asm-x86/mach-default/apm.h
diff --git a/include/asm-i386/mach-default/bios_ebda.h b/include/asm-x86/mach-default/bios_ebda.h
index 9cbd9a668af..9cbd9a668af 100644
--- a/include/asm-i386/mach-default/bios_ebda.h
+++ b/include/asm-x86/mach-default/bios_ebda.h
diff --git a/include/asm-i386/mach-default/do_timer.h b/include/asm-x86/mach-default/do_timer.h
index 23ecda0b28a..23ecda0b28a 100644
--- a/include/asm-i386/mach-default/do_timer.h
+++ b/include/asm-x86/mach-default/do_timer.h
diff --git a/include/asm-i386/mach-default/entry_arch.h b/include/asm-x86/mach-default/entry_arch.h
index bc861469bdb..bc861469bdb 100644
--- a/include/asm-i386/mach-default/entry_arch.h
+++ b/include/asm-x86/mach-default/entry_arch.h
diff --git a/include/asm-i386/mach-default/io_ports.h b/include/asm-x86/mach-default/io_ports.h
index 48540ba9716..48540ba9716 100644
--- a/include/asm-i386/mach-default/io_ports.h
+++ b/include/asm-x86/mach-default/io_ports.h
diff --git a/include/asm-i386/mach-default/irq_vectors.h b/include/asm-x86/mach-default/irq_vectors.h
index 881c63ca61a..881c63ca61a 100644
--- a/include/asm-i386/mach-default/irq_vectors.h
+++ b/include/asm-x86/mach-default/irq_vectors.h
diff --git a/include/asm-i386/mach-default/irq_vectors_limits.h b/include/asm-x86/mach-default/irq_vectors_limits.h
index a90c7a60109..a90c7a60109 100644
--- a/include/asm-i386/mach-default/irq_vectors_limits.h
+++ b/include/asm-x86/mach-default/irq_vectors_limits.h
diff --git a/include/asm-i386/mach-default/mach_apic.h b/include/asm-x86/mach-default/mach_apic.h
index 6db1c3babe9..6db1c3babe9 100644
--- a/include/asm-i386/mach-default/mach_apic.h
+++ b/include/asm-x86/mach-default/mach_apic.h
diff --git a/include/asm-i386/mach-default/mach_apicdef.h b/include/asm-x86/mach-default/mach_apicdef.h
index 7bcb350c3ee..7bcb350c3ee 100644
--- a/include/asm-i386/mach-default/mach_apicdef.h
+++ b/include/asm-x86/mach-default/mach_apicdef.h
diff --git a/include/asm-i386/mach-default/mach_ipi.h b/include/asm-x86/mach-default/mach_ipi.h
index 0dba244c86d..0dba244c86d 100644
--- a/include/asm-i386/mach-default/mach_ipi.h
+++ b/include/asm-x86/mach-default/mach_ipi.h
diff --git a/include/asm-i386/mach-default/mach_mpparse.h b/include/asm-x86/mach-default/mach_mpparse.h
index 1d383248258..1d383248258 100644
--- a/include/asm-i386/mach-default/mach_mpparse.h
+++ b/include/asm-x86/mach-default/mach_mpparse.h
diff --git a/include/asm-i386/mach-default/mach_mpspec.h b/include/asm-x86/mach-default/mach_mpspec.h
index 51c9a977593..51c9a977593 100644
--- a/include/asm-i386/mach-default/mach_mpspec.h
+++ b/include/asm-x86/mach-default/mach_mpspec.h
diff --git a/include/asm-i386/mach-default/mach_reboot.h b/include/asm-x86/mach-default/mach_reboot.h
index e23fd9fbebb..e23fd9fbebb 100644
--- a/include/asm-i386/mach-default/mach_reboot.h
+++ b/include/asm-x86/mach-default/mach_reboot.h
diff --git a/include/asm-i386/mach-default/mach_time.h b/include/asm-x86/mach-default/mach_time.h
index 31eb5de6f3d..31eb5de6f3d 100644
--- a/include/asm-i386/mach-default/mach_time.h
+++ b/include/asm-x86/mach-default/mach_time.h
diff --git a/include/asm-i386/mach-default/mach_timer.h b/include/asm-x86/mach-default/mach_timer.h
index 807992fd417..807992fd417 100644
--- a/include/asm-i386/mach-default/mach_timer.h
+++ b/include/asm-x86/mach-default/mach_timer.h
diff --git a/include/asm-i386/mach-default/mach_traps.h b/include/asm-x86/mach-default/mach_traps.h
index 625438b8a6e..625438b8a6e 100644
--- a/include/asm-i386/mach-default/mach_traps.h
+++ b/include/asm-x86/mach-default/mach_traps.h
diff --git a/include/asm-i386/mach-default/mach_wakecpu.h b/include/asm-x86/mach-default/mach_wakecpu.h
index 3ebb17893aa..3ebb17893aa 100644
--- a/include/asm-i386/mach-default/mach_wakecpu.h
+++ b/include/asm-x86/mach-default/mach_wakecpu.h
diff --git a/include/asm-i386/mach-default/pci-functions.h b/include/asm-x86/mach-default/pci-functions.h
index ed0bab42735..ed0bab42735 100644
--- a/include/asm-i386/mach-default/pci-functions.h
+++ b/include/asm-x86/mach-default/pci-functions.h
diff --git a/include/asm-i386/mach-default/setup_arch.h b/include/asm-x86/mach-default/setup_arch.h
index 605e3ccb991..605e3ccb991 100644
--- a/include/asm-i386/mach-default/setup_arch.h
+++ b/include/asm-x86/mach-default/setup_arch.h
diff --git a/include/asm-i386/mach-default/smpboot_hooks.h b/include/asm-x86/mach-default/smpboot_hooks.h
index 7f45f631105..7f45f631105 100644
--- a/include/asm-i386/mach-default/smpboot_hooks.h
+++ b/include/asm-x86/mach-default/smpboot_hooks.h
diff --git a/include/asm-i386/mach-es7000/mach_apic.h b/include/asm-x86/mach-es7000/mach_apic.h
index caec64be516..caec64be516 100644
--- a/include/asm-i386/mach-es7000/mach_apic.h
+++ b/include/asm-x86/mach-es7000/mach_apic.h
diff --git a/include/asm-i386/mach-es7000/mach_apicdef.h b/include/asm-x86/mach-es7000/mach_apicdef.h
index a58ab5a75c8..a58ab5a75c8 100644
--- a/include/asm-i386/mach-es7000/mach_apicdef.h
+++ b/include/asm-x86/mach-es7000/mach_apicdef.h
diff --git a/include/asm-i386/mach-es7000/mach_ipi.h b/include/asm-x86/mach-es7000/mach_ipi.h
index 5e61bd220b0..5e61bd220b0 100644
--- a/include/asm-i386/mach-es7000/mach_ipi.h
+++ b/include/asm-x86/mach-es7000/mach_ipi.h
diff --git a/include/asm-i386/mach-es7000/mach_mpparse.h b/include/asm-x86/mach-es7000/mach_mpparse.h
index 8aa10547b4b..8aa10547b4b 100644
--- a/include/asm-i386/mach-es7000/mach_mpparse.h
+++ b/include/asm-x86/mach-es7000/mach_mpparse.h
diff --git a/include/asm-i386/mach-es7000/mach_mpspec.h b/include/asm-x86/mach-es7000/mach_mpspec.h
index b1f5039d450..b1f5039d450 100644
--- a/include/asm-i386/mach-es7000/mach_mpspec.h
+++ b/include/asm-x86/mach-es7000/mach_mpspec.h
diff --git a/include/asm-i386/mach-es7000/mach_wakecpu.h b/include/asm-x86/mach-es7000/mach_wakecpu.h
index 84ff5831450..84ff5831450 100644
--- a/include/asm-i386/mach-es7000/mach_wakecpu.h
+++ b/include/asm-x86/mach-es7000/mach_wakecpu.h
diff --git a/include/asm-i386/mach-generic/irq_vectors_limits.h b/include/asm-x86/mach-generic/irq_vectors_limits.h
index 890ce3f5e09..890ce3f5e09 100644
--- a/include/asm-i386/mach-generic/irq_vectors_limits.h
+++ b/include/asm-x86/mach-generic/irq_vectors_limits.h
diff --git a/include/asm-i386/mach-generic/mach_apic.h b/include/asm-x86/mach-generic/mach_apic.h
index a236e702152..a236e702152 100644
--- a/include/asm-i386/mach-generic/mach_apic.h
+++ b/include/asm-x86/mach-generic/mach_apic.h
diff --git a/include/asm-i386/mach-generic/mach_apicdef.h b/include/asm-x86/mach-generic/mach_apicdef.h
index 28ed98972ca..28ed98972ca 100644
--- a/include/asm-i386/mach-generic/mach_apicdef.h
+++ b/include/asm-x86/mach-generic/mach_apicdef.h
diff --git a/include/asm-i386/mach-generic/mach_ipi.h b/include/asm-x86/mach-generic/mach_ipi.h
index 441b0fe3ed1..441b0fe3ed1 100644
--- a/include/asm-i386/mach-generic/mach_ipi.h
+++ b/include/asm-x86/mach-generic/mach_ipi.h
diff --git a/include/asm-i386/mach-generic/mach_mpparse.h b/include/asm-x86/mach-generic/mach_mpparse.h
index dbd9fce54f4..dbd9fce54f4 100644
--- a/include/asm-i386/mach-generic/mach_mpparse.h
+++ b/include/asm-x86/mach-generic/mach_mpparse.h
diff --git a/include/asm-i386/mach-generic/mach_mpspec.h b/include/asm-x86/mach-generic/mach_mpspec.h
index 9ef0b941bb2..9ef0b941bb2 100644
--- a/include/asm-i386/mach-generic/mach_mpspec.h
+++ b/include/asm-x86/mach-generic/mach_mpspec.h
diff --git a/include/asm-i386/mach-numaq/mach_apic.h b/include/asm-x86/mach-numaq/mach_apic.h
index 5e5e7dd2692..5e5e7dd2692 100644
--- a/include/asm-i386/mach-numaq/mach_apic.h
+++ b/include/asm-x86/mach-numaq/mach_apic.h
diff --git a/include/asm-i386/mach-numaq/mach_apicdef.h b/include/asm-x86/mach-numaq/mach_apicdef.h
index bf439d0690f..bf439d0690f 100644
--- a/include/asm-i386/mach-numaq/mach_apicdef.h
+++ b/include/asm-x86/mach-numaq/mach_apicdef.h
diff --git a/include/asm-i386/mach-numaq/mach_ipi.h b/include/asm-x86/mach-numaq/mach_ipi.h
index c6044488e9e..c6044488e9e 100644
--- a/include/asm-i386/mach-numaq/mach_ipi.h
+++ b/include/asm-x86/mach-numaq/mach_ipi.h
diff --git a/include/asm-i386/mach-numaq/mach_mpparse.h b/include/asm-x86/mach-numaq/mach_mpparse.h
index 51bbac8fc0c..51bbac8fc0c 100644
--- a/include/asm-i386/mach-numaq/mach_mpparse.h
+++ b/include/asm-x86/mach-numaq/mach_mpparse.h
diff --git a/include/asm-i386/mach-numaq/mach_mpspec.h b/include/asm-x86/mach-numaq/mach_mpspec.h
index dffb09856f8..dffb09856f8 100644
--- a/include/asm-i386/mach-numaq/mach_mpspec.h
+++ b/include/asm-x86/mach-numaq/mach_mpspec.h
diff --git a/include/asm-i386/mach-numaq/mach_wakecpu.h b/include/asm-x86/mach-numaq/mach_wakecpu.h
index 00530041a99..00530041a99 100644
--- a/include/asm-i386/mach-numaq/mach_wakecpu.h
+++ b/include/asm-x86/mach-numaq/mach_wakecpu.h
diff --git a/include/asm-i386/mach-summit/irq_vectors_limits.h b/include/asm-x86/mach-summit/irq_vectors_limits.h
index 890ce3f5e09..890ce3f5e09 100644
--- a/include/asm-i386/mach-summit/irq_vectors_limits.h
+++ b/include/asm-x86/mach-summit/irq_vectors_limits.h
diff --git a/include/asm-i386/mach-summit/mach_apic.h b/include/asm-x86/mach-summit/mach_apic.h
index 732f776aab8..732f776aab8 100644
--- a/include/asm-i386/mach-summit/mach_apic.h
+++ b/include/asm-x86/mach-summit/mach_apic.h
diff --git a/include/asm-i386/mach-summit/mach_apicdef.h b/include/asm-x86/mach-summit/mach_apicdef.h
index a58ab5a75c8..a58ab5a75c8 100644
--- a/include/asm-i386/mach-summit/mach_apicdef.h
+++ b/include/asm-x86/mach-summit/mach_apicdef.h
diff --git a/include/asm-i386/mach-summit/mach_ipi.h b/include/asm-x86/mach-summit/mach_ipi.h
index 9404c535b7e..9404c535b7e 100644
--- a/include/asm-i386/mach-summit/mach_ipi.h
+++ b/include/asm-x86/mach-summit/mach_ipi.h
diff --git a/include/asm-i386/mach-summit/mach_mpparse.h b/include/asm-x86/mach-summit/mach_mpparse.h
index c2520539d93..c2520539d93 100644
--- a/include/asm-i386/mach-summit/mach_mpparse.h
+++ b/include/asm-x86/mach-summit/mach_mpparse.h
diff --git a/include/asm-i386/mach-summit/mach_mpspec.h b/include/asm-x86/mach-summit/mach_mpspec.h
index bd765523511..bd765523511 100644
--- a/include/asm-i386/mach-summit/mach_mpspec.h
+++ b/include/asm-x86/mach-summit/mach_mpspec.h
diff --git a/include/asm-i386/mach-visws/cobalt.h b/include/asm-x86/mach-visws/cobalt.h
index 33c36225a04..33c36225a04 100644
--- a/include/asm-i386/mach-visws/cobalt.h
+++ b/include/asm-x86/mach-visws/cobalt.h
diff --git a/include/asm-i386/mach-visws/entry_arch.h b/include/asm-x86/mach-visws/entry_arch.h
index b183fa6d83d..b183fa6d83d 100644
--- a/include/asm-i386/mach-visws/entry_arch.h
+++ b/include/asm-x86/mach-visws/entry_arch.h
diff --git a/include/asm-i386/mach-visws/irq_vectors.h b/include/asm-x86/mach-visws/irq_vectors.h
index cb572d8db50..cb572d8db50 100644
--- a/include/asm-i386/mach-visws/irq_vectors.h
+++ b/include/asm-x86/mach-visws/irq_vectors.h
diff --git a/include/asm-i386/mach-visws/lithium.h b/include/asm-x86/mach-visws/lithium.h
index d443e68d006..d443e68d006 100644
--- a/include/asm-i386/mach-visws/lithium.h
+++ b/include/asm-x86/mach-visws/lithium.h
diff --git a/include/asm-i386/mach-visws/mach_apic.h b/include/asm-x86/mach-visws/mach_apic.h
index efac6f0d139..efac6f0d139 100644
--- a/include/asm-i386/mach-visws/mach_apic.h
+++ b/include/asm-x86/mach-visws/mach_apic.h
diff --git a/include/asm-i386/mach-visws/mach_apicdef.h b/include/asm-x86/mach-visws/mach_apicdef.h
index 826cfa97d77..826cfa97d77 100644
--- a/include/asm-i386/mach-visws/mach_apicdef.h
+++ b/include/asm-x86/mach-visws/mach_apicdef.h
diff --git a/include/asm-i386/mach-visws/piix4.h b/include/asm-x86/mach-visws/piix4.h
index 83ea4f46e41..83ea4f46e41 100644
--- a/include/asm-i386/mach-visws/piix4.h
+++ b/include/asm-x86/mach-visws/piix4.h
diff --git a/include/asm-i386/mach-visws/setup_arch.h b/include/asm-x86/mach-visws/setup_arch.h
index 33f700ef683..33f700ef683 100644
--- a/include/asm-i386/mach-visws/setup_arch.h
+++ b/include/asm-x86/mach-visws/setup_arch.h
diff --git a/include/asm-i386/mach-visws/smpboot_hooks.h b/include/asm-x86/mach-visws/smpboot_hooks.h
index d926471fa35..d926471fa35 100644
--- a/include/asm-i386/mach-visws/smpboot_hooks.h
+++ b/include/asm-x86/mach-visws/smpboot_hooks.h
diff --git a/include/asm-i386/mach-voyager/do_timer.h b/include/asm-x86/mach-voyager/do_timer.h
index bc2b5892630..bc2b5892630 100644
--- a/include/asm-i386/mach-voyager/do_timer.h
+++ b/include/asm-x86/mach-voyager/do_timer.h
diff --git a/include/asm-i386/mach-voyager/entry_arch.h b/include/asm-x86/mach-voyager/entry_arch.h
index 4a1e1e8c10b..4a1e1e8c10b 100644
--- a/include/asm-i386/mach-voyager/entry_arch.h
+++ b/include/asm-x86/mach-voyager/entry_arch.h
diff --git a/include/asm-i386/mach-voyager/irq_vectors.h b/include/asm-x86/mach-voyager/irq_vectors.h
index 165421f5821..165421f5821 100644
--- a/include/asm-i386/mach-voyager/irq_vectors.h
+++ b/include/asm-x86/mach-voyager/irq_vectors.h
diff --git a/include/asm-i386/mach-voyager/setup_arch.h b/include/asm-x86/mach-voyager/setup_arch.h
index 84d01ad3345..84d01ad3345 100644
--- a/include/asm-i386/mach-voyager/setup_arch.h
+++ b/include/asm-x86/mach-voyager/setup_arch.h
diff --git a/include/asm-x86_64/mach_apic.h b/include/asm-x86/mach_apic.h
index 7b7115a0c1c..7b7115a0c1c 100644
--- a/include/asm-x86_64/mach_apic.h
+++ b/include/asm-x86/mach_apic.h
diff --git a/include/asm-i386/math_emu.h b/include/asm-x86/math_emu.h
index a4b0aa3320e..a4b0aa3320e 100644
--- a/include/asm-i386/math_emu.h
+++ b/include/asm-x86/math_emu.h
diff --git a/include/asm-x86/mc146818rtc.h b/include/asm-x86/mc146818rtc.h
new file mode 100644
index 00000000000..5c2bb66caf1
--- /dev/null
+++ b/include/asm-x86/mc146818rtc.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "mc146818rtc_32.h"
+#else
+# include "mc146818rtc_64.h"
+#endif
diff --git a/include/asm-i386/mc146818rtc.h b/include/asm-x86/mc146818rtc_32.h
index 1613b42eaf5..1613b42eaf5 100644
--- a/include/asm-i386/mc146818rtc.h
+++ b/include/asm-x86/mc146818rtc_32.h
diff --git a/include/asm-x86_64/mc146818rtc.h b/include/asm-x86/mc146818rtc_64.h
index d6e3009430c..d6e3009430c 100644
--- a/include/asm-x86_64/mc146818rtc.h
+++ b/include/asm-x86/mc146818rtc_64.h
diff --git a/include/asm-i386/mca.h b/include/asm-x86/mca.h
index 09adf2eac4d..09adf2eac4d 100644
--- a/include/asm-i386/mca.h
+++ b/include/asm-x86/mca.h
diff --git a/include/asm-i386/mca_dma.h b/include/asm-x86/mca_dma.h
index fbb1f3b7127..fbb1f3b7127 100644
--- a/include/asm-i386/mca_dma.h
+++ b/include/asm-x86/mca_dma.h
diff --git a/include/asm-x86/mce.h b/include/asm-x86/mce.h
new file mode 100644
index 00000000000..cc8ca389912
--- /dev/null
+++ b/include/asm-x86/mce.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "mce_32.h"
+#else
+# include "mce_64.h"
+#endif
diff --git a/include/asm-i386/mce.h b/include/asm-x86/mce_32.h
index d56d89742e8..d56d89742e8 100644
--- a/include/asm-i386/mce.h
+++ b/include/asm-x86/mce_32.h
diff --git a/include/asm-x86_64/mce.h b/include/asm-x86/mce_64.h
index 7bc030a1996..7bc030a1996 100644
--- a/include/asm-x86_64/mce.h
+++ b/include/asm-x86/mce_64.h
diff --git a/include/asm-x86/mman.h b/include/asm-x86/mman.h
new file mode 100644
index 00000000000..322db07e82c
--- /dev/null
+++ b/include/asm-x86/mman.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "mman_32.h"
+# else
+# include "mman_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "mman_32.h"
+# else
+# include "mman_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/mman.h b/include/asm-x86/mman_32.h
index 8fd9d7ab7fa..8fd9d7ab7fa 100644
--- a/include/asm-i386/mman.h
+++ b/include/asm-x86/mman_32.h
diff --git a/include/asm-x86_64/mman.h b/include/asm-x86/mman_64.h
index dd5cb0534d3..dd5cb0534d3 100644
--- a/include/asm-x86_64/mman.h
+++ b/include/asm-x86/mman_64.h
diff --git a/include/asm-x86_64/mmsegment.h b/include/asm-x86/mmsegment.h
index d3f80c99633..d3f80c99633 100644
--- a/include/asm-x86_64/mmsegment.h
+++ b/include/asm-x86/mmsegment.h
diff --git a/include/asm-x86/mmu.h b/include/asm-x86/mmu.h
new file mode 100644
index 00000000000..9c628cd70e2
--- /dev/null
+++ b/include/asm-x86/mmu.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "mmu_32.h"
+#else
+# include "mmu_64.h"
+#endif
diff --git a/include/asm-i386/mmu.h b/include/asm-x86/mmu_32.h
index 8358dd3df7a..8358dd3df7a 100644
--- a/include/asm-i386/mmu.h
+++ b/include/asm-x86/mmu_32.h
diff --git a/include/asm-x86_64/mmu.h b/include/asm-x86/mmu_64.h
index d2cd4a9d984..d2cd4a9d984 100644
--- a/include/asm-x86_64/mmu.h
+++ b/include/asm-x86/mmu_64.h
diff --git a/include/asm-x86/mmu_context.h b/include/asm-x86/mmu_context.h
new file mode 100644
index 00000000000..6598450da6c
--- /dev/null
+++ b/include/asm-x86/mmu_context.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "mmu_context_32.h"
+#else
+# include "mmu_context_64.h"
+#endif
diff --git a/include/asm-i386/mmu_context.h b/include/asm-x86/mmu_context_32.h
index 7eb0b0b1fb3..7eb0b0b1fb3 100644
--- a/include/asm-i386/mmu_context.h
+++ b/include/asm-x86/mmu_context_32.h
diff --git a/include/asm-x86_64/mmu_context.h b/include/asm-x86/mmu_context_64.h
index 0cce83a7837..0cce83a7837 100644
--- a/include/asm-x86_64/mmu_context.h
+++ b/include/asm-x86/mmu_context_64.h
diff --git a/include/asm-i386/mmx.h b/include/asm-x86/mmx.h
index 46b71da9986..46b71da9986 100644
--- a/include/asm-i386/mmx.h
+++ b/include/asm-x86/mmx.h
diff --git a/include/asm-x86/mmzone.h b/include/asm-x86/mmzone.h
new file mode 100644
index 00000000000..64217ea16a3
--- /dev/null
+++ b/include/asm-x86/mmzone.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "mmzone_32.h"
+#else
+# include "mmzone_64.h"
+#endif
diff --git a/include/asm-i386/mmzone.h b/include/asm-x86/mmzone_32.h
index 118e9812778..118e9812778 100644
--- a/include/asm-i386/mmzone.h
+++ b/include/asm-x86/mmzone_32.h
diff --git a/include/asm-x86_64/mmzone.h b/include/asm-x86/mmzone_64.h
index 19a89377b12..19a89377b12 100644
--- a/include/asm-x86_64/mmzone.h
+++ b/include/asm-x86/mmzone_64.h
diff --git a/include/asm-x86/module.h b/include/asm-x86/module.h
new file mode 100644
index 00000000000..2b2f18d8a53
--- /dev/null
+++ b/include/asm-x86/module.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "module_32.h"
+#else
+# include "module_64.h"
+#endif
diff --git a/include/asm-i386/module.h b/include/asm-x86/module_32.h
index 7e5fda6c397..7e5fda6c397 100644
--- a/include/asm-i386/module.h
+++ b/include/asm-x86/module_32.h
diff --git a/include/asm-x86_64/module.h b/include/asm-x86/module_64.h
index 67f8f69fa7b..67f8f69fa7b 100644
--- a/include/asm-x86_64/module.h
+++ b/include/asm-x86/module_64.h
diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h
new file mode 100644
index 00000000000..8f268e8fd2e
--- /dev/null
+++ b/include/asm-x86/mpspec.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "mpspec_32.h"
+#else
+# include "mpspec_64.h"
+#endif
diff --git a/include/asm-i386/mpspec.h b/include/asm-x86/mpspec_32.h
index f21349399d1..f21349399d1 100644
--- a/include/asm-i386/mpspec.h
+++ b/include/asm-x86/mpspec_32.h
diff --git a/include/asm-x86_64/mpspec.h b/include/asm-x86/mpspec_64.h
index 017fddb61dc..017fddb61dc 100644
--- a/include/asm-x86_64/mpspec.h
+++ b/include/asm-x86/mpspec_64.h
diff --git a/include/asm-i386/mpspec_def.h b/include/asm-x86/mpspec_def.h
index 13bafb16e7a..13bafb16e7a 100644
--- a/include/asm-i386/mpspec_def.h
+++ b/include/asm-x86/mpspec_def.h
diff --git a/include/asm-x86/msgbuf.h b/include/asm-x86/msgbuf.h
new file mode 100644
index 00000000000..154f7d64e86
--- /dev/null
+++ b/include/asm-x86/msgbuf.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "msgbuf_32.h"
+# else
+# include "msgbuf_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "msgbuf_32.h"
+# else
+# include "msgbuf_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/msgbuf.h b/include/asm-x86/msgbuf_32.h
index b8d659c157a..b8d659c157a 100644
--- a/include/asm-i386/msgbuf.h
+++ b/include/asm-x86/msgbuf_32.h
diff --git a/include/asm-x86_64/msgbuf.h b/include/asm-x86/msgbuf_64.h
index cd6f95dd54d..cd6f95dd54d 100644
--- a/include/asm-x86_64/msgbuf.h
+++ b/include/asm-x86/msgbuf_64.h
diff --git a/include/asm-i386/msidef.h b/include/asm-x86/msidef.h
index 5b8acddb70f..5b8acddb70f 100644
--- a/include/asm-i386/msidef.h
+++ b/include/asm-x86/msidef.h
diff --git a/include/asm-i386/msr-index.h b/include/asm-x86/msr-index.h
index a02eb299134..a02eb299134 100644
--- a/include/asm-i386/msr-index.h
+++ b/include/asm-x86/msr-index.h
diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h
new file mode 100644
index 00000000000..2f87ce00700
--- /dev/null
+++ b/include/asm-x86/msr.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "msr_32.h"
+# else
+# include "msr_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "msr_32.h"
+# else
+# include "msr_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/msr.h b/include/asm-x86/msr_32.h
index df21ea04936..df21ea04936 100644
--- a/include/asm-i386/msr.h
+++ b/include/asm-x86/msr_32.h
diff --git a/include/asm-x86_64/msr.h b/include/asm-x86/msr_64.h
index d5c55b80da5..d5c55b80da5 100644
--- a/include/asm-x86_64/msr.h
+++ b/include/asm-x86/msr_64.h
diff --git a/include/asm-x86/mtrr.h b/include/asm-x86/mtrr.h
new file mode 100644
index 00000000000..34f633b3e00
--- /dev/null
+++ b/include/asm-x86/mtrr.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "mtrr_32.h"
+# else
+# include "mtrr_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "mtrr_32.h"
+# else
+# include "mtrr_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/mtrr.h b/include/asm-x86/mtrr_32.h
index 7e9c7ccbdcf..7e9c7ccbdcf 100644
--- a/include/asm-i386/mtrr.h
+++ b/include/asm-x86/mtrr_32.h
diff --git a/include/asm-x86_64/mtrr.h b/include/asm-x86/mtrr_64.h
index b557c486bef..b557c486bef 100644
--- a/include/asm-x86_64/mtrr.h
+++ b/include/asm-x86/mtrr_64.h
diff --git a/include/asm-x86/mutex.h b/include/asm-x86/mutex.h
new file mode 100644
index 00000000000..a731b9c573a
--- /dev/null
+++ b/include/asm-x86/mutex.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "mutex_32.h"
+#else
+# include "mutex_64.h"
+#endif
diff --git a/include/asm-i386/mutex.h b/include/asm-x86/mutex_32.h
index 7a17d9e58ad..7a17d9e58ad 100644
--- a/include/asm-i386/mutex.h
+++ b/include/asm-x86/mutex_32.h
diff --git a/include/asm-x86_64/mutex.h b/include/asm-x86/mutex_64.h
index 6c2949a3c67..6c2949a3c67 100644
--- a/include/asm-x86_64/mutex.h
+++ b/include/asm-x86/mutex_64.h
diff --git a/include/asm-x86/namei.h b/include/asm-x86/namei.h
new file mode 100644
index 00000000000..732f8f0b3dc
--- /dev/null
+++ b/include/asm-x86/namei.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "namei_32.h"
+#else
+# include "namei_64.h"
+#endif
diff --git a/include/asm-i386/namei.h b/include/asm-x86/namei_32.h
index 81486508861..81486508861 100644
--- a/include/asm-i386/namei.h
+++ b/include/asm-x86/namei_32.h
diff --git a/include/asm-x86_64/namei.h b/include/asm-x86/namei_64.h
index bef239f5318..bef239f5318 100644
--- a/include/asm-x86_64/namei.h
+++ b/include/asm-x86/namei_64.h
diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h
new file mode 100644
index 00000000000..53ccac14cea
--- /dev/null
+++ b/include/asm-x86/nmi.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "nmi_32.h"
+#else
+# include "nmi_64.h"
+#endif
diff --git a/include/asm-i386/nmi.h b/include/asm-x86/nmi_32.h
index 70a958a8e38..70a958a8e38 100644
--- a/include/asm-i386/nmi.h
+++ b/include/asm-x86/nmi_32.h
diff --git a/include/asm-x86_64/nmi.h b/include/asm-x86/nmi_64.h
index 65b6acf3bb5..65b6acf3bb5 100644
--- a/include/asm-x86_64/nmi.h
+++ b/include/asm-x86/nmi_64.h
diff --git a/include/asm-x86/numa.h b/include/asm-x86/numa.h
new file mode 100644
index 00000000000..27da400d313
--- /dev/null
+++ b/include/asm-x86/numa.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "numa_32.h"
+#else
+# include "numa_64.h"
+#endif
diff --git a/include/asm-i386/numa.h b/include/asm-x86/numa_32.h
index 96fcb157db1..96fcb157db1 100644
--- a/include/asm-i386/numa.h
+++ b/include/asm-x86/numa_32.h
diff --git a/include/asm-x86_64/numa.h b/include/asm-x86/numa_64.h
index 933ff11ece1..933ff11ece1 100644
--- a/include/asm-x86_64/numa.h
+++ b/include/asm-x86/numa_64.h
diff --git a/include/asm-i386/numaq.h b/include/asm-x86/numaq.h
index 38f710dc37f..38f710dc37f 100644
--- a/include/asm-i386/numaq.h
+++ b/include/asm-x86/numaq.h
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
new file mode 100644
index 00000000000..a757eb26141
--- /dev/null
+++ b/include/asm-x86/page.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "page_32.h"
+# else
+# include "page_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "page_32.h"
+# else
+# include "page_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/page.h b/include/asm-x86/page_32.h
index 80ecc66b6d8..80ecc66b6d8 100644
--- a/include/asm-i386/page.h
+++ b/include/asm-x86/page_32.h
diff --git a/include/asm-x86_64/page.h b/include/asm-x86/page_64.h
index 88adf1afb0a..88adf1afb0a 100644
--- a/include/asm-x86_64/page.h
+++ b/include/asm-x86/page_64.h
diff --git a/include/asm-x86/param.h b/include/asm-x86/param.h
new file mode 100644
index 00000000000..640851bab12
--- /dev/null
+++ b/include/asm-x86/param.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "param_32.h"
+# else
+# include "param_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "param_32.h"
+# else
+# include "param_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/param.h b/include/asm-x86/param_32.h
index 21b32466fcd..21b32466fcd 100644
--- a/include/asm-i386/param.h
+++ b/include/asm-x86/param_32.h
diff --git a/include/asm-x86_64/param.h b/include/asm-x86/param_64.h
index a728786c3c7..a728786c3c7 100644
--- a/include/asm-x86_64/param.h
+++ b/include/asm-x86/param_64.h
diff --git a/include/asm-i386/paravirt.h b/include/asm-x86/paravirt.h
index 9fa3fa9e62d..9fa3fa9e62d 100644
--- a/include/asm-i386/paravirt.h
+++ b/include/asm-x86/paravirt.h
diff --git a/include/asm-x86/parport.h b/include/asm-x86/parport.h
new file mode 100644
index 00000000000..2a31157349c
--- /dev/null
+++ b/include/asm-x86/parport.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "parport_32.h"
+#else
+# include "parport_64.h"
+#endif
diff --git a/include/asm-i386/parport.h b/include/asm-x86/parport_32.h
index fa0e321e498..fa0e321e498 100644
--- a/include/asm-i386/parport.h
+++ b/include/asm-x86/parport_32.h
diff --git a/include/asm-x86_64/parport.h b/include/asm-x86/parport_64.h
index 7135ef977c9..7135ef977c9 100644
--- a/include/asm-x86_64/parport.h
+++ b/include/asm-x86/parport_64.h
diff --git a/include/asm-x86_64/pci-direct.h b/include/asm-x86/pci-direct.h
index 6823fa4f1af..6823fa4f1af 100644
--- a/include/asm-x86_64/pci-direct.h
+++ b/include/asm-x86/pci-direct.h
diff --git a/include/asm-x86/pci.h b/include/asm-x86/pci.h
new file mode 100644
index 00000000000..a8cac8c2cde
--- /dev/null
+++ b/include/asm-x86/pci.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "pci_32.h"
+#else
+# include "pci_64.h"
+#endif
diff --git a/include/asm-i386/pci.h b/include/asm-x86/pci_32.h
index 4fcacc71138..4fcacc71138 100644
--- a/include/asm-i386/pci.h
+++ b/include/asm-x86/pci_32.h
diff --git a/include/asm-x86_64/pci.h b/include/asm-x86/pci_64.h
index 5da8cb0c059..5da8cb0c059 100644
--- a/include/asm-x86_64/pci.h
+++ b/include/asm-x86/pci_64.h
diff --git a/include/asm-x86_64/pda.h b/include/asm-x86/pda.h
index 5642634843c..5642634843c 100644
--- a/include/asm-x86_64/pda.h
+++ b/include/asm-x86/pda.h
diff --git a/include/asm-x86/percpu.h b/include/asm-x86/percpu.h
new file mode 100644
index 00000000000..a1aaad274cc
--- /dev/null
+++ b/include/asm-x86/percpu.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "percpu_32.h"
+#else
+# include "percpu_64.h"
+#endif
diff --git a/include/asm-i386/percpu.h b/include/asm-x86/percpu_32.h
index a7ebd436f3c..a7ebd436f3c 100644
--- a/include/asm-i386/percpu.h
+++ b/include/asm-x86/percpu_32.h
diff --git a/include/asm-x86_64/percpu.h b/include/asm-x86/percpu_64.h
index 5abd4827010..5abd4827010 100644
--- a/include/asm-x86_64/percpu.h
+++ b/include/asm-x86/percpu_64.h
diff --git a/include/asm-x86/pgalloc.h b/include/asm-x86/pgalloc.h
new file mode 100644
index 00000000000..5886eed0588
--- /dev/null
+++ b/include/asm-x86/pgalloc.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "pgalloc_32.h"
+#else
+# include "pgalloc_64.h"
+#endif
diff --git a/include/asm-i386/pgalloc.h b/include/asm-x86/pgalloc_32.h
index f2fc33ceb9f..f2fc33ceb9f 100644
--- a/include/asm-i386/pgalloc.h
+++ b/include/asm-x86/pgalloc_32.h
diff --git a/include/asm-x86_64/pgalloc.h b/include/asm-x86/pgalloc_64.h
index 8bb56468786..8bb56468786 100644
--- a/include/asm-x86_64/pgalloc.h
+++ b/include/asm-x86/pgalloc_64.h
diff --git a/include/asm-i386/pgtable-2level-defs.h b/include/asm-x86/pgtable-2level-defs.h
index 0f71c9f13da..0f71c9f13da 100644
--- a/include/asm-i386/pgtable-2level-defs.h
+++ b/include/asm-x86/pgtable-2level-defs.h
diff --git a/include/asm-i386/pgtable-2level.h b/include/asm-x86/pgtable-2level.h
index 84b03cf56a7..84b03cf56a7 100644
--- a/include/asm-i386/pgtable-2level.h
+++ b/include/asm-x86/pgtable-2level.h
diff --git a/include/asm-i386/pgtable-3level-defs.h b/include/asm-x86/pgtable-3level-defs.h
index c0df89f66e8..c0df89f66e8 100644
--- a/include/asm-i386/pgtable-3level-defs.h
+++ b/include/asm-x86/pgtable-3level-defs.h
diff --git a/include/asm-i386/pgtable-3level.h b/include/asm-x86/pgtable-3level.h
index 948a3341411..948a3341411 100644
--- a/include/asm-i386/pgtable-3level.h
+++ b/include/asm-x86/pgtable-3level.h
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
new file mode 100644
index 00000000000..1039140652a
--- /dev/null
+++ b/include/asm-x86/pgtable.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "pgtable_32.h"
+#else
+# include "pgtable_64.h"
+#endif
diff --git a/include/asm-i386/pgtable.h b/include/asm-x86/pgtable_32.h
index c7fefa6b12f..c7fefa6b12f 100644
--- a/include/asm-i386/pgtable.h
+++ b/include/asm-x86/pgtable_32.h
diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86/pgtable_64.h
index 57dd6b3107e..57dd6b3107e 100644
--- a/include/asm-x86_64/pgtable.h
+++ b/include/asm-x86/pgtable_64.h
diff --git a/include/asm-i386/poll.h b/include/asm-x86/poll.h
index c98509d3149..c98509d3149 100644
--- a/include/asm-i386/poll.h
+++ b/include/asm-x86/poll.h
diff --git a/include/asm-x86/posix_types.h b/include/asm-x86/posix_types.h
new file mode 100644
index 00000000000..bb7133dc155
--- /dev/null
+++ b/include/asm-x86/posix_types.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "posix_types_32.h"
+# else
+# include "posix_types_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "posix_types_32.h"
+# else
+# include "posix_types_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/posix_types.h b/include/asm-x86/posix_types_32.h
index 133e31e7dfd..133e31e7dfd 100644
--- a/include/asm-i386/posix_types.h
+++ b/include/asm-x86/posix_types_32.h
diff --git a/include/asm-x86_64/posix_types.h b/include/asm-x86/posix_types_64.h
index 9926aa43775..9926aa43775 100644
--- a/include/asm-x86_64/posix_types.h
+++ b/include/asm-x86/posix_types_64.h
diff --git a/include/asm-x86_64/prctl.h b/include/asm-x86/prctl.h
index 52952adef1c..52952adef1c 100644
--- a/include/asm-x86_64/prctl.h
+++ b/include/asm-x86/prctl.h
diff --git a/include/asm-i386/processor-cyrix.h b/include/asm-x86/processor-cyrix.h
index 97568ada1f9..97568ada1f9 100644
--- a/include/asm-i386/processor-cyrix.h
+++ b/include/asm-x86/processor-cyrix.h
diff --git a/include/asm-i386/processor-flags.h b/include/asm-x86/processor-flags.h
index 5404e90edd5..5404e90edd5 100644
--- a/include/asm-i386/processor-flags.h
+++ b/include/asm-x86/processor-flags.h
diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h
new file mode 100644
index 00000000000..46e1c04e309
--- /dev/null
+++ b/include/asm-x86/processor.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "processor_32.h"
+#else
+# include "processor_64.h"
+#endif
diff --git a/include/asm-i386/processor.h b/include/asm-x86/processor_32.h
index 3845fe72383..3845fe72383 100644
--- a/include/asm-i386/processor.h
+++ b/include/asm-x86/processor_32.h
diff --git a/include/asm-x86_64/processor.h b/include/asm-x86/processor_64.h
index 31f579b828f..31f579b828f 100644
--- a/include/asm-x86_64/processor.h
+++ b/include/asm-x86/processor_64.h
diff --git a/include/asm-x86_64/proto.h b/include/asm-x86/proto.h
index 31f20ad6587..31f20ad6587 100644
--- a/include/asm-x86_64/proto.h
+++ b/include/asm-x86/proto.h
diff --git a/include/asm-x86/ptrace-abi.h b/include/asm-x86/ptrace-abi.h
new file mode 100644
index 00000000000..6824c49def1
--- /dev/null
+++ b/include/asm-x86/ptrace-abi.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "ptrace-abi_32.h"
+# else
+# include "ptrace-abi_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "ptrace-abi_32.h"
+# else
+# include "ptrace-abi_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/ptrace-abi.h b/include/asm-x86/ptrace-abi_32.h
index a44901817a2..a44901817a2 100644
--- a/include/asm-i386/ptrace-abi.h
+++ b/include/asm-x86/ptrace-abi_32.h
diff --git a/include/asm-x86_64/ptrace-abi.h b/include/asm-x86/ptrace-abi_64.h
index 19184b0806b..19184b0806b 100644
--- a/include/asm-x86_64/ptrace-abi.h
+++ b/include/asm-x86/ptrace-abi_64.h
diff --git a/include/asm-x86/ptrace.h b/include/asm-x86/ptrace.h
new file mode 100644
index 00000000000..bc4d64a8768
--- /dev/null
+++ b/include/asm-x86/ptrace.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "ptrace_32.h"
+# else
+# include "ptrace_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "ptrace_32.h"
+# else
+# include "ptrace_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/ptrace.h b/include/asm-x86/ptrace_32.h
index 6002597b9e1..6002597b9e1 100644
--- a/include/asm-i386/ptrace.h
+++ b/include/asm-x86/ptrace_32.h
diff --git a/include/asm-x86_64/ptrace.h b/include/asm-x86/ptrace_64.h
index 7f166ccb060..7f166ccb060 100644
--- a/include/asm-x86_64/ptrace.h
+++ b/include/asm-x86/ptrace_64.h
diff --git a/include/asm-i386/reboot.h b/include/asm-x86/reboot.h
index e9e3ffc22c0..e9e3ffc22c0 100644
--- a/include/asm-i386/reboot.h
+++ b/include/asm-x86/reboot.h
diff --git a/include/asm-i386/reboot_fixups.h b/include/asm-x86/reboot_fixups.h
index 0cb7d87c2b6..0cb7d87c2b6 100644
--- a/include/asm-i386/reboot_fixups.h
+++ b/include/asm-x86/reboot_fixups.h
diff --git a/include/asm-x86/required-features.h b/include/asm-x86/required-features.h
new file mode 100644
index 00000000000..8b64f3ea2b7
--- /dev/null
+++ b/include/asm-x86/required-features.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "required-features_32.h"
+#else
+# include "required-features_64.h"
+#endif
diff --git a/include/asm-i386/required-features.h b/include/asm-x86/required-features_32.h
index 618feb98f9f..618feb98f9f 100644
--- a/include/asm-i386/required-features.h
+++ b/include/asm-x86/required-features_32.h
diff --git a/include/asm-x86_64/required-features.h b/include/asm-x86/required-features_64.h
index e80d5761b00..e80d5761b00 100644
--- a/include/asm-x86_64/required-features.h
+++ b/include/asm-x86/required-features_64.h
diff --git a/include/asm-x86/resource.h b/include/asm-x86/resource.h
new file mode 100644
index 00000000000..732410a8c02
--- /dev/null
+++ b/include/asm-x86/resource.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "resource_32.h"
+# else
+# include "resource_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "resource_32.h"
+# else
+# include "resource_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/resource.h b/include/asm-x86/resource_32.h
index 6c1ea37c771..6c1ea37c771 100644
--- a/include/asm-i386/resource.h
+++ b/include/asm-x86/resource_32.h
diff --git a/include/asm-x86_64/resource.h b/include/asm-x86/resource_64.h
index f40b4062323..f40b4062323 100644
--- a/include/asm-x86_64/resource.h
+++ b/include/asm-x86/resource_64.h
diff --git a/include/asm-x86/resume-trace.h b/include/asm-x86/resume-trace.h
new file mode 100644
index 00000000000..9b6dd093a9f
--- /dev/null
+++ b/include/asm-x86/resume-trace.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "resume-trace_32.h"
+#else
+# include "resume-trace_64.h"
+#endif
diff --git a/include/asm-i386/resume-trace.h b/include/asm-x86/resume-trace_32.h
index ec9cfd65623..ec9cfd65623 100644
--- a/include/asm-i386/resume-trace.h
+++ b/include/asm-x86/resume-trace_32.h
diff --git a/include/asm-x86_64/resume-trace.h b/include/asm-x86/resume-trace_64.h
index 34bf998fdf6..34bf998fdf6 100644
--- a/include/asm-x86_64/resume-trace.h
+++ b/include/asm-x86/resume-trace_64.h
diff --git a/include/asm-x86_64/rio.h b/include/asm-x86/rio.h
index c7350f6d201..c7350f6d201 100644
--- a/include/asm-x86_64/rio.h
+++ b/include/asm-x86/rio.h
diff --git a/include/asm-x86/rtc.h b/include/asm-x86/rtc.h
new file mode 100644
index 00000000000..1f0c98eb2e3
--- /dev/null
+++ b/include/asm-x86/rtc.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "rtc_32.h"
+#else
+# include "rtc_64.h"
+#endif
diff --git a/include/asm-i386/rtc.h b/include/asm-x86/rtc_32.h
index ffd02109a0e..ffd02109a0e 100644
--- a/include/asm-i386/rtc.h
+++ b/include/asm-x86/rtc_32.h
diff --git a/include/asm-x86_64/rtc.h b/include/asm-x86/rtc_64.h
index 18ed713ac7d..18ed713ac7d 100644
--- a/include/asm-x86_64/rtc.h
+++ b/include/asm-x86/rtc_64.h
diff --git a/include/asm-x86/rwlock.h b/include/asm-x86/rwlock.h
new file mode 100644
index 00000000000..a3be7d8364a
--- /dev/null
+++ b/include/asm-x86/rwlock.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "rwlock_32.h"
+#else
+# include "rwlock_64.h"
+#endif
diff --git a/include/asm-i386/rwlock.h b/include/asm-x86/rwlock_32.h
index c3e5db32fa4..c3e5db32fa4 100644
--- a/include/asm-i386/rwlock.h
+++ b/include/asm-x86/rwlock_32.h
diff --git a/include/asm-x86_64/rwlock.h b/include/asm-x86/rwlock_64.h
index 72aeebed920..72aeebed920 100644
--- a/include/asm-x86_64/rwlock.h
+++ b/include/asm-x86/rwlock_64.h
diff --git a/include/asm-i386/rwsem.h b/include/asm-x86/rwsem.h
index 041906f3c6d..041906f3c6d 100644
--- a/include/asm-i386/rwsem.h
+++ b/include/asm-x86/rwsem.h
diff --git a/include/asm-x86/scatterlist.h b/include/asm-x86/scatterlist.h
new file mode 100644
index 00000000000..3a1e76257a2
--- /dev/null
+++ b/include/asm-x86/scatterlist.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "scatterlist_32.h"
+#else
+# include "scatterlist_64.h"
+#endif
diff --git a/include/asm-i386/scatterlist.h b/include/asm-x86/scatterlist_32.h
index d7e45a8f1aa..d7e45a8f1aa 100644
--- a/include/asm-i386/scatterlist.h
+++ b/include/asm-x86/scatterlist_32.h
diff --git a/include/asm-x86_64/scatterlist.h b/include/asm-x86/scatterlist_64.h
index eaf7ada27e1..eaf7ada27e1 100644
--- a/include/asm-x86_64/scatterlist.h
+++ b/include/asm-x86/scatterlist_64.h
diff --git a/include/asm-x86/seccomp.h b/include/asm-x86/seccomp.h
new file mode 100644
index 00000000000..c62e58a5a90
--- /dev/null
+++ b/include/asm-x86/seccomp.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "seccomp_32.h"
+#else
+# include "seccomp_64.h"
+#endif
diff --git a/include/asm-i386/seccomp.h b/include/asm-x86/seccomp_32.h
index 18da19e89bf..18da19e89bf 100644
--- a/include/asm-i386/seccomp.h
+++ b/include/asm-x86/seccomp_32.h
diff --git a/include/asm-x86_64/seccomp.h b/include/asm-x86/seccomp_64.h
index 553af65a228..553af65a228 100644
--- a/include/asm-x86_64/seccomp.h
+++ b/include/asm-x86/seccomp_64.h
diff --git a/include/asm-x86/sections.h b/include/asm-x86/sections.h
new file mode 100644
index 00000000000..ae6c69d9be3
--- /dev/null
+++ b/include/asm-x86/sections.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "sections_32.h"
+#else
+# include "sections_64.h"
+#endif
diff --git a/include/asm-i386/sections.h b/include/asm-x86/sections_32.h
index 2dcbb92918b..2dcbb92918b 100644
--- a/include/asm-i386/sections.h
+++ b/include/asm-x86/sections_32.h
diff --git a/include/asm-x86_64/sections.h b/include/asm-x86/sections_64.h
index c746d9f1e70..c746d9f1e70 100644
--- a/include/asm-x86_64/sections.h
+++ b/include/asm-x86/sections_64.h
diff --git a/include/asm-x86/segment.h b/include/asm-x86/segment.h
new file mode 100644
index 00000000000..605068280e2
--- /dev/null
+++ b/include/asm-x86/segment.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "segment_32.h"
+#else
+# include "segment_64.h"
+#endif
diff --git a/include/asm-i386/segment.h b/include/asm-x86/segment_32.h
index 597a47c2515..597a47c2515 100644
--- a/include/asm-i386/segment.h
+++ b/include/asm-x86/segment_32.h
diff --git a/include/asm-x86_64/segment.h b/include/asm-x86/segment_64.h
index 04b8ab21328..04b8ab21328 100644
--- a/include/asm-x86_64/segment.h
+++ b/include/asm-x86/segment_64.h
diff --git a/include/asm-x86/semaphore.h b/include/asm-x86/semaphore.h
new file mode 100644
index 00000000000..572c0b67a6b
--- /dev/null
+++ b/include/asm-x86/semaphore.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "semaphore_32.h"
+#else
+# include "semaphore_64.h"
+#endif
diff --git a/include/asm-i386/semaphore.h b/include/asm-x86/semaphore_32.h
index 4e34a468c38..4e34a468c38 100644
--- a/include/asm-i386/semaphore.h
+++ b/include/asm-x86/semaphore_32.h
diff --git a/include/asm-x86_64/semaphore.h b/include/asm-x86/semaphore_64.h
index 1194888536b..1194888536b 100644
--- a/include/asm-x86_64/semaphore.h
+++ b/include/asm-x86/semaphore_64.h
diff --git a/include/asm-x86/sembuf.h b/include/asm-x86/sembuf.h
new file mode 100644
index 00000000000..e42c971e383
--- /dev/null
+++ b/include/asm-x86/sembuf.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "sembuf_32.h"
+# else
+# include "sembuf_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "sembuf_32.h"
+# else
+# include "sembuf_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/sembuf.h b/include/asm-x86/sembuf_32.h
index 323835166c1..323835166c1 100644
--- a/include/asm-i386/sembuf.h
+++ b/include/asm-x86/sembuf_32.h
diff --git a/include/asm-x86_64/sembuf.h b/include/asm-x86/sembuf_64.h
index 63b52925ae2..63b52925ae2 100644
--- a/include/asm-x86_64/sembuf.h
+++ b/include/asm-x86/sembuf_64.h
diff --git a/include/asm-x86/serial.h b/include/asm-x86/serial.h
new file mode 100644
index 00000000000..cf1b05227b2
--- /dev/null
+++ b/include/asm-x86/serial.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "serial_32.h"
+#else
+# include "serial_64.h"
+#endif
diff --git a/include/asm-i386/serial.h b/include/asm-x86/serial_32.h
index bd67480ca10..bd67480ca10 100644
--- a/include/asm-i386/serial.h
+++ b/include/asm-x86/serial_32.h
diff --git a/include/asm-x86_64/serial.h b/include/asm-x86/serial_64.h
index b0496e0d72a..b0496e0d72a 100644
--- a/include/asm-x86_64/serial.h
+++ b/include/asm-x86/serial_64.h
diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h
new file mode 100644
index 00000000000..81c0d98bb1c
--- /dev/null
+++ b/include/asm-x86/setup.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "setup_32.h"
+# else
+# include "setup_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "setup_32.h"
+# else
+# include "setup_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/setup.h b/include/asm-x86/setup_32.h
index 7862fe858a9..7862fe858a9 100644
--- a/include/asm-i386/setup.h
+++ b/include/asm-x86/setup_32.h
diff --git a/include/asm-x86_64/setup.h b/include/asm-x86/setup_64.h
index eaeff73d6c1..eaeff73d6c1 100644
--- a/include/asm-x86_64/setup.h
+++ b/include/asm-x86/setup_64.h
diff --git a/include/asm-x86/shmbuf.h b/include/asm-x86/shmbuf.h
new file mode 100644
index 00000000000..e85f1cb1121
--- /dev/null
+++ b/include/asm-x86/shmbuf.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "shmbuf_32.h"
+# else
+# include "shmbuf_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "shmbuf_32.h"
+# else
+# include "shmbuf_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/shmbuf.h b/include/asm-x86/shmbuf_32.h
index d1cdc3cb079..d1cdc3cb079 100644
--- a/include/asm-i386/shmbuf.h
+++ b/include/asm-x86/shmbuf_32.h
diff --git a/include/asm-x86_64/shmbuf.h b/include/asm-x86/shmbuf_64.h
index 5a6d6dda7c4..5a6d6dda7c4 100644
--- a/include/asm-x86_64/shmbuf.h
+++ b/include/asm-x86/shmbuf_64.h
diff --git a/include/asm-x86/shmparam.h b/include/asm-x86/shmparam.h
new file mode 100644
index 00000000000..165627cc534
--- /dev/null
+++ b/include/asm-x86/shmparam.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "shmparam_32.h"
+# else
+# include "shmparam_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "shmparam_32.h"
+# else
+# include "shmparam_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/shmparam.h b/include/asm-x86/shmparam_32.h
index 786243a5b31..786243a5b31 100644
--- a/include/asm-i386/shmparam.h
+++ b/include/asm-x86/shmparam_32.h
diff --git a/include/asm-x86_64/shmparam.h b/include/asm-x86/shmparam_64.h
index d7021620dcb..d7021620dcb 100644
--- a/include/asm-x86_64/shmparam.h
+++ b/include/asm-x86/shmparam_64.h
diff --git a/include/asm-x86/sigcontext.h b/include/asm-x86/sigcontext.h
new file mode 100644
index 00000000000..0d16ceff159
--- /dev/null
+++ b/include/asm-x86/sigcontext.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "sigcontext_32.h"
+# else
+# include "sigcontext_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "sigcontext_32.h"
+# else
+# include "sigcontext_64.h"
+# endif
+#endif
diff --git a/include/asm-x86_64/sigcontext32.h b/include/asm-x86/sigcontext32.h
index 3d657038ab7..3d657038ab7 100644
--- a/include/asm-x86_64/sigcontext32.h
+++ b/include/asm-x86/sigcontext32.h
diff --git a/include/asm-i386/sigcontext.h b/include/asm-x86/sigcontext_32.h
index aaef089a778..aaef089a778 100644
--- a/include/asm-i386/sigcontext.h
+++ b/include/asm-x86/sigcontext_32.h
diff --git a/include/asm-x86_64/sigcontext.h b/include/asm-x86/sigcontext_64.h
index b4e40236666..b4e40236666 100644
--- a/include/asm-x86_64/sigcontext.h
+++ b/include/asm-x86/sigcontext_64.h
diff --git a/include/asm-x86/siginfo.h b/include/asm-x86/siginfo.h
new file mode 100644
index 00000000000..0b8e4bb47d2
--- /dev/null
+++ b/include/asm-x86/siginfo.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "siginfo_32.h"
+# else
+# include "siginfo_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "siginfo_32.h"
+# else
+# include "siginfo_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/siginfo.h b/include/asm-x86/siginfo_32.h
index fe18f98fccf..fe18f98fccf 100644
--- a/include/asm-i386/siginfo.h
+++ b/include/asm-x86/siginfo_32.h
diff --git a/include/asm-x86_64/siginfo.h b/include/asm-x86/siginfo_64.h
index d09a1e6e724..d09a1e6e724 100644
--- a/include/asm-x86_64/siginfo.h
+++ b/include/asm-x86/siginfo_64.h
diff --git a/include/asm-x86/signal.h b/include/asm-x86/signal.h
new file mode 100644
index 00000000000..bf5a63f457d
--- /dev/null
+++ b/include/asm-x86/signal.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "signal_32.h"
+# else
+# include "signal_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "signal_32.h"
+# else
+# include "signal_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/signal.h b/include/asm-x86/signal_32.h
index c3e8adec591..c3e8adec591 100644
--- a/include/asm-i386/signal.h
+++ b/include/asm-x86/signal_32.h
diff --git a/include/asm-x86_64/signal.h b/include/asm-x86/signal_64.h
index 4581f978b29..4581f978b29 100644
--- a/include/asm-x86_64/signal.h
+++ b/include/asm-x86/signal_64.h
diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h
new file mode 100644
index 00000000000..f2e8319a6b0
--- /dev/null
+++ b/include/asm-x86/smp.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "smp_32.h"
+#else
+# include "smp_64.h"
+#endif
diff --git a/include/asm-i386/smp.h b/include/asm-x86/smp_32.h
index 1f73bde165b..1f73bde165b 100644
--- a/include/asm-i386/smp.h
+++ b/include/asm-x86/smp_32.h
diff --git a/include/asm-x86_64/smp.h b/include/asm-x86/smp_64.h
index 3f303d2365e..3f303d2365e 100644
--- a/include/asm-x86_64/smp.h
+++ b/include/asm-x86/smp_64.h
diff --git a/include/asm-i386/socket.h b/include/asm-x86/socket.h
index 99ca648b94c..99ca648b94c 100644
--- a/include/asm-i386/socket.h
+++ b/include/asm-x86/socket.h
diff --git a/include/asm-x86/sockios.h b/include/asm-x86/sockios.h
new file mode 100644
index 00000000000..5a134fc70b9
--- /dev/null
+++ b/include/asm-x86/sockios.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "sockios_32.h"
+# else
+# include "sockios_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "sockios_32.h"
+# else
+# include "sockios_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/sockios.h b/include/asm-x86/sockios_32.h
index ff528c7d255..ff528c7d255 100644
--- a/include/asm-i386/sockios.h
+++ b/include/asm-x86/sockios_32.h
diff --git a/include/asm-x86_64/sockios.h b/include/asm-x86/sockios_64.h
index d726ba2513e..d726ba2513e 100644
--- a/include/asm-x86_64/sockios.h
+++ b/include/asm-x86/sockios_64.h
diff --git a/include/asm-x86/sparsemem.h b/include/asm-x86/sparsemem.h
new file mode 100644
index 00000000000..3f203b1d9ee
--- /dev/null
+++ b/include/asm-x86/sparsemem.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "sparsemem_32.h"
+#else
+# include "sparsemem_64.h"
+#endif
diff --git a/include/asm-i386/sparsemem.h b/include/asm-x86/sparsemem_32.h
index cfeed990585..cfeed990585 100644
--- a/include/asm-i386/sparsemem.h
+++ b/include/asm-x86/sparsemem_32.h
diff --git a/include/asm-x86_64/sparsemem.h b/include/asm-x86/sparsemem_64.h
index dabb16714a7..dabb16714a7 100644
--- a/include/asm-x86_64/sparsemem.h
+++ b/include/asm-x86/sparsemem_64.h
diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h
new file mode 100644
index 00000000000..d74d85e71dc
--- /dev/null
+++ b/include/asm-x86/spinlock.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "spinlock_32.h"
+#else
+# include "spinlock_64.h"
+#endif
diff --git a/include/asm-i386/spinlock.h b/include/asm-x86/spinlock_32.h
index d3bcebed60c..d3bcebed60c 100644
--- a/include/asm-i386/spinlock.h
+++ b/include/asm-x86/spinlock_32.h
diff --git a/include/asm-x86_64/spinlock.h b/include/asm-x86/spinlock_64.h
index 88bf981e73c..88bf981e73c 100644
--- a/include/asm-x86_64/spinlock.h
+++ b/include/asm-x86/spinlock_64.h
diff --git a/include/asm-i386/spinlock_types.h b/include/asm-x86/spinlock_types.h
index 4da9345c150..4da9345c150 100644
--- a/include/asm-i386/spinlock_types.h
+++ b/include/asm-x86/spinlock_types.h
diff --git a/include/asm-i386/srat.h b/include/asm-x86/srat.h
index 165ab4bdc02..165ab4bdc02 100644
--- a/include/asm-i386/srat.h
+++ b/include/asm-x86/srat.h
diff --git a/include/asm-x86_64/stacktrace.h b/include/asm-x86/stacktrace.h
index 6f0b5459430..6f0b5459430 100644
--- a/include/asm-x86_64/stacktrace.h
+++ b/include/asm-x86/stacktrace.h
diff --git a/include/asm-x86/stat.h b/include/asm-x86/stat.h
new file mode 100644
index 00000000000..3ff6b50ef83
--- /dev/null
+++ b/include/asm-x86/stat.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "stat_32.h"
+# else
+# include "stat_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "stat_32.h"
+# else
+# include "stat_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/stat.h b/include/asm-x86/stat_32.h
index 67eae78323b..67eae78323b 100644
--- a/include/asm-i386/stat.h
+++ b/include/asm-x86/stat_32.h
diff --git a/include/asm-x86_64/stat.h b/include/asm-x86/stat_64.h
index fd9f00d560f..fd9f00d560f 100644
--- a/include/asm-x86_64/stat.h
+++ b/include/asm-x86/stat_64.h
diff --git a/include/asm-x86/statfs.h b/include/asm-x86/statfs.h
new file mode 100644
index 00000000000..327fb5d7a14
--- /dev/null
+++ b/include/asm-x86/statfs.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "statfs_32.h"
+# else
+# include "statfs_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "statfs_32.h"
+# else
+# include "statfs_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/statfs.h b/include/asm-x86/statfs_32.h
index 24972c17513..24972c17513 100644
--- a/include/asm-i386/statfs.h
+++ b/include/asm-x86/statfs_32.h
diff --git a/include/asm-x86_64/statfs.h b/include/asm-x86/statfs_64.h
index b3f4718af30..b3f4718af30 100644
--- a/include/asm-x86_64/statfs.h
+++ b/include/asm-x86/statfs_64.h
diff --git a/include/asm-x86/string.h b/include/asm-x86/string.h
new file mode 100644
index 00000000000..6dfd6d9373a
--- /dev/null
+++ b/include/asm-x86/string.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "string_32.h"
+#else
+# include "string_64.h"
+#endif
diff --git a/include/asm-i386/string.h b/include/asm-x86/string_32.h
index a9b64453bdf..a9b64453bdf 100644
--- a/include/asm-i386/string.h
+++ b/include/asm-x86/string_32.h
diff --git a/include/asm-x86_64/string.h b/include/asm-x86/string_64.h
index e583da7918f..e583da7918f 100644
--- a/include/asm-x86_64/string.h
+++ b/include/asm-x86/string_64.h
diff --git a/include/asm-x86/suspend.h b/include/asm-x86/suspend.h
new file mode 100644
index 00000000000..9bd521fe457
--- /dev/null
+++ b/include/asm-x86/suspend.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "suspend_32.h"
+#else
+# include "suspend_64.h"
+#endif
diff --git a/include/asm-i386/suspend.h b/include/asm-x86/suspend_32.h
index a2520732ffd..a2520732ffd 100644
--- a/include/asm-i386/suspend.h
+++ b/include/asm-x86/suspend_32.h
diff --git a/include/asm-x86_64/suspend.h b/include/asm-x86/suspend_64.h
index b897e8cb55f..b897e8cb55f 100644
--- a/include/asm-x86_64/suspend.h
+++ b/include/asm-x86/suspend_64.h
diff --git a/include/asm-x86_64/swiotlb.h b/include/asm-x86/swiotlb.h
index f9c589539a8..f9c589539a8 100644
--- a/include/asm-x86_64/swiotlb.h
+++ b/include/asm-x86/swiotlb.h
diff --git a/include/asm-i386/sync_bitops.h b/include/asm-x86/sync_bitops.h
index cbce08a2d13..cbce08a2d13 100644
--- a/include/asm-i386/sync_bitops.h
+++ b/include/asm-x86/sync_bitops.h
diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h
new file mode 100644
index 00000000000..692562b48f2
--- /dev/null
+++ b/include/asm-x86/system.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "system_32.h"
+#else
+# include "system_64.h"
+#endif
diff --git a/include/asm-i386/system.h b/include/asm-x86/system_32.h
index d69ba937e09..d69ba937e09 100644
--- a/include/asm-i386/system.h
+++ b/include/asm-x86/system_32.h
diff --git a/include/asm-x86_64/system.h b/include/asm-x86/system_64.h
index 02175aa1d16..02175aa1d16 100644
--- a/include/asm-x86_64/system.h
+++ b/include/asm-x86/system_64.h
diff --git a/include/asm-x86_64/tce.h b/include/asm-x86/tce.h
index cd955d3d112..cd955d3d112 100644
--- a/include/asm-x86_64/tce.h
+++ b/include/asm-x86/tce.h
diff --git a/include/asm-x86/termbits.h b/include/asm-x86/termbits.h
new file mode 100644
index 00000000000..69f3080e2a1
--- /dev/null
+++ b/include/asm-x86/termbits.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "termbits_32.h"
+# else
+# include "termbits_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "termbits_32.h"
+# else
+# include "termbits_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/termbits.h b/include/asm-x86/termbits_32.h
index a21700352e7..a21700352e7 100644
--- a/include/asm-i386/termbits.h
+++ b/include/asm-x86/termbits_32.h
diff --git a/include/asm-x86_64/termbits.h b/include/asm-x86/termbits_64.h
index 7405756dd41..7405756dd41 100644
--- a/include/asm-x86_64/termbits.h
+++ b/include/asm-x86/termbits_64.h
diff --git a/include/asm-x86/termios.h b/include/asm-x86/termios.h
new file mode 100644
index 00000000000..a4f4ae20a59
--- /dev/null
+++ b/include/asm-x86/termios.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "termios_32.h"
+# else
+# include "termios_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "termios_32.h"
+# else
+# include "termios_64.h"
+# endif
+#endif
diff --git a/include/asm-x86/termios_32.h b/include/asm-x86/termios_32.h
new file mode 100644
index 00000000000..6fdb2c841b7
--- /dev/null
+++ b/include/asm-x86/termios_32.h
@@ -0,0 +1,90 @@
+#ifndef _I386_TERMIOS_H
+#define _I386_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/* intr=^C quit=^\ erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+ unsigned short __tmp; \
+ get_user(__tmp,&(termio)->x); \
+ *(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* __KERNEL__ */
+
+#endif /* _I386_TERMIOS_H */
diff --git a/include/asm-x86_64/termios.h b/include/asm-x86/termios_64.h
index 35ee59b7832..35ee59b7832 100644
--- a/include/asm-x86_64/termios.h
+++ b/include/asm-x86/termios_64.h
diff --git a/include/asm-i386/therm_throt.h b/include/asm-x86/therm_throt.h
index 399bf6026b1..399bf6026b1 100644
--- a/include/asm-i386/therm_throt.h
+++ b/include/asm-x86/therm_throt.h
diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h
new file mode 100644
index 00000000000..d5fd12f2abd
--- /dev/null
+++ b/include/asm-x86/thread_info.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "thread_info_32.h"
+#else
+# include "thread_info_64.h"
+#endif
diff --git a/include/asm-i386/thread_info.h b/include/asm-x86/thread_info_32.h
index 22a8cbcd35e..22a8cbcd35e 100644
--- a/include/asm-i386/thread_info.h
+++ b/include/asm-x86/thread_info_32.h
diff --git a/include/asm-x86_64/thread_info.h b/include/asm-x86/thread_info_64.h
index beae2bfb62c..beae2bfb62c 100644
--- a/include/asm-x86_64/thread_info.h
+++ b/include/asm-x86/thread_info_64.h
diff --git a/include/asm-i386/time.h b/include/asm-x86/time.h
index eac011366dc..eac011366dc 100644
--- a/include/asm-i386/time.h
+++ b/include/asm-x86/time.h
diff --git a/include/asm-i386/timer.h b/include/asm-x86/timer.h
index 0db7e994fb8..0db7e994fb8 100644
--- a/include/asm-i386/timer.h
+++ b/include/asm-x86/timer.h
diff --git a/include/asm-x86/timex.h b/include/asm-x86/timex.h
new file mode 100644
index 00000000000..d01c18cfcce
--- /dev/null
+++ b/include/asm-x86/timex.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "timex_32.h"
+#else
+# include "timex_64.h"
+#endif
diff --git a/include/asm-i386/timex.h b/include/asm-x86/timex_32.h
index 3666044409f..3666044409f 100644
--- a/include/asm-i386/timex.h
+++ b/include/asm-x86/timex_32.h
diff --git a/include/asm-x86_64/timex.h b/include/asm-x86/timex_64.h
index 6ed21f44d30..6ed21f44d30 100644
--- a/include/asm-x86_64/timex.h
+++ b/include/asm-x86/timex_64.h
diff --git a/include/asm-x86/tlb.h b/include/asm-x86/tlb.h
new file mode 100644
index 00000000000..7d55c3762b4
--- /dev/null
+++ b/include/asm-x86/tlb.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "tlb_32.h"
+#else
+# include "tlb_64.h"
+#endif
diff --git a/include/asm-i386/tlb.h b/include/asm-x86/tlb_32.h
index c006c5c92be..c006c5c92be 100644
--- a/include/asm-i386/tlb.h
+++ b/include/asm-x86/tlb_32.h
diff --git a/include/asm-x86_64/tlb.h b/include/asm-x86/tlb_64.h
index cd4c3c590a0..cd4c3c590a0 100644
--- a/include/asm-x86_64/tlb.h
+++ b/include/asm-x86/tlb_64.h
diff --git a/include/asm-x86/tlbflush.h b/include/asm-x86/tlbflush.h
new file mode 100644
index 00000000000..9af4cc83a1a
--- /dev/null
+++ b/include/asm-x86/tlbflush.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "tlbflush_32.h"
+#else
+# include "tlbflush_64.h"
+#endif
diff --git a/include/asm-i386/tlbflush.h b/include/asm-x86/tlbflush_32.h
index a50fa674148..a50fa674148 100644
--- a/include/asm-i386/tlbflush.h
+++ b/include/asm-x86/tlbflush_32.h
diff --git a/include/asm-x86_64/tlbflush.h b/include/asm-x86/tlbflush_64.h
index 888eb4abdd0..888eb4abdd0 100644
--- a/include/asm-x86_64/tlbflush.h
+++ b/include/asm-x86/tlbflush_64.h
diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h
new file mode 100644
index 00000000000..b10fde9798e
--- /dev/null
+++ b/include/asm-x86/topology.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "topology_32.h"
+#else
+# include "topology_64.h"
+#endif
diff --git a/include/asm-i386/topology.h b/include/asm-x86/topology_32.h
index 19b2dafd0c8..19b2dafd0c8 100644
--- a/include/asm-i386/topology.h
+++ b/include/asm-x86/topology_32.h
diff --git a/include/asm-x86_64/topology.h b/include/asm-x86/topology_64.h
index 36e52fba796..36e52fba796 100644
--- a/include/asm-x86_64/topology.h
+++ b/include/asm-x86/topology_64.h
diff --git a/include/asm-i386/tsc.h b/include/asm-x86/tsc.h
index a4d806610b7..a4d806610b7 100644
--- a/include/asm-i386/tsc.h
+++ b/include/asm-x86/tsc.h
diff --git a/include/asm-x86/types.h b/include/asm-x86/types.h
new file mode 100644
index 00000000000..a777a9b8397
--- /dev/null
+++ b/include/asm-x86/types.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "types_32.h"
+# else
+# include "types_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "types_32.h"
+# else
+# include "types_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/types.h b/include/asm-x86/types_32.h
index ad0a55bd782..ad0a55bd782 100644
--- a/include/asm-i386/types.h
+++ b/include/asm-x86/types_32.h
diff --git a/include/asm-x86_64/types.h b/include/asm-x86/types_64.h
index 2d4491aae28..2d4491aae28 100644
--- a/include/asm-x86_64/types.h
+++ b/include/asm-x86/types_64.h
diff --git a/include/asm-x86/uaccess.h b/include/asm-x86/uaccess.h
new file mode 100644
index 00000000000..9fefd2947e7
--- /dev/null
+++ b/include/asm-x86/uaccess.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "uaccess_32.h"
+#else
+# include "uaccess_64.h"
+#endif
diff --git a/include/asm-i386/uaccess.h b/include/asm-x86/uaccess_32.h
index d2a4f7be9c2..d2a4f7be9c2 100644
--- a/include/asm-i386/uaccess.h
+++ b/include/asm-x86/uaccess_32.h
diff --git a/include/asm-x86_64/uaccess.h b/include/asm-x86/uaccess_64.h
index f4ce8768ad4..f4ce8768ad4 100644
--- a/include/asm-x86_64/uaccess.h
+++ b/include/asm-x86/uaccess_64.h
diff --git a/include/asm-x86/ucontext.h b/include/asm-x86/ucontext.h
new file mode 100644
index 00000000000..175c8cb5973
--- /dev/null
+++ b/include/asm-x86/ucontext.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "ucontext_32.h"
+# else
+# include "ucontext_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "ucontext_32.h"
+# else
+# include "ucontext_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/ucontext.h b/include/asm-x86/ucontext_32.h
index b0db36925f5..b0db36925f5 100644
--- a/include/asm-i386/ucontext.h
+++ b/include/asm-x86/ucontext_32.h
diff --git a/include/asm-x86_64/ucontext.h b/include/asm-x86/ucontext_64.h
index 159a3da9e11..159a3da9e11 100644
--- a/include/asm-x86_64/ucontext.h
+++ b/include/asm-x86/ucontext_64.h
diff --git a/include/asm-x86/unaligned.h b/include/asm-x86/unaligned.h
new file mode 100644
index 00000000000..68067150fbc
--- /dev/null
+++ b/include/asm-x86/unaligned.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "unaligned_32.h"
+#else
+# include "unaligned_64.h"
+#endif
diff --git a/include/asm-i386/unaligned.h b/include/asm-x86/unaligned_32.h
index 7acd7957621..7acd7957621 100644
--- a/include/asm-i386/unaligned.h
+++ b/include/asm-x86/unaligned_32.h
diff --git a/include/asm-x86_64/unaligned.h b/include/asm-x86/unaligned_64.h
index d4bf78dc6f3..d4bf78dc6f3 100644
--- a/include/asm-x86_64/unaligned.h
+++ b/include/asm-x86/unaligned_64.h
diff --git a/include/asm-x86/unistd.h b/include/asm-x86/unistd.h
new file mode 100644
index 00000000000..2a58ed3e51d
--- /dev/null
+++ b/include/asm-x86/unistd.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "unistd_32.h"
+# else
+# include "unistd_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "unistd_32.h"
+# else
+# include "unistd_64.h"
+# endif
+#endif
diff --git a/include/asm-i386/unistd.h b/include/asm-x86/unistd_32.h
index 9b15545eb9b..9b15545eb9b 100644
--- a/include/asm-i386/unistd.h
+++ b/include/asm-x86/unistd_32.h
diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86/unistd_64.h
index fc4e73f5f1f..fc4e73f5f1f 100644
--- a/include/asm-x86_64/unistd.h
+++ b/include/asm-x86/unistd_64.h
diff --git a/include/asm-x86/unwind.h b/include/asm-x86/unwind.h
new file mode 100644
index 00000000000..7e4d7ad5520
--- /dev/null
+++ b/include/asm-x86/unwind.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "unwind_32.h"
+#else
+# include "unwind_64.h"
+#endif
diff --git a/include/asm-i386/unwind.h b/include/asm-x86/unwind_32.h
index 43c70c3de2f..43c70c3de2f 100644
--- a/include/asm-i386/unwind.h
+++ b/include/asm-x86/unwind_32.h
diff --git a/include/asm-x86_64/unwind.h b/include/asm-x86/unwind_64.h
index 02710f6a456..02710f6a456 100644
--- a/include/asm-x86_64/unwind.h
+++ b/include/asm-x86/unwind_64.h
diff --git a/include/asm-x86/user.h b/include/asm-x86/user.h
new file mode 100644
index 00000000000..484715abe74
--- /dev/null
+++ b/include/asm-x86/user.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+# include "user_32.h"
+# else
+# include "user_64.h"
+# endif
+#else
+# ifdef __i386__
+# include "user_32.h"
+# else
+# include "user_64.h"
+# endif
+#endif
diff --git a/include/asm-x86_64/user32.h b/include/asm-x86/user32.h
index f769872debe..f769872debe 100644
--- a/include/asm-x86_64/user32.h
+++ b/include/asm-x86/user32.h
diff --git a/include/asm-i386/user.h b/include/asm-x86/user_32.h
index 0e85d2a5e33..0e85d2a5e33 100644
--- a/include/asm-i386/user.h
+++ b/include/asm-x86/user_32.h
diff --git a/include/asm-x86_64/user.h b/include/asm-x86/user_64.h
index 12785c649ac..12785c649ac 100644
--- a/include/asm-x86_64/user.h
+++ b/include/asm-x86/user_64.h
diff --git a/include/asm-i386/vga.h b/include/asm-x86/vga.h
index 0ecf68ac03a..0ecf68ac03a 100644
--- a/include/asm-i386/vga.h
+++ b/include/asm-x86/vga.h
diff --git a/include/asm-x86_64/vgtod.h b/include/asm-x86/vgtod.h
index 3301f092934..3301f092934 100644
--- a/include/asm-x86_64/vgtod.h
+++ b/include/asm-x86/vgtod.h
diff --git a/include/asm-i386/vic.h b/include/asm-x86/vic.h
index 53100f35361..53100f35361 100644
--- a/include/asm-i386/vic.h
+++ b/include/asm-x86/vic.h
diff --git a/include/asm-i386/vm86.h b/include/asm-x86/vm86.h
index a5edf517b99..a5edf517b99 100644
--- a/include/asm-i386/vm86.h
+++ b/include/asm-x86/vm86.h
diff --git a/include/asm-i386/vmi.h b/include/asm-x86/vmi.h
index eb8bd892c01..eb8bd892c01 100644
--- a/include/asm-i386/vmi.h
+++ b/include/asm-x86/vmi.h
diff --git a/include/asm-i386/vmi_time.h b/include/asm-x86/vmi_time.h
index 47818813032..47818813032 100644
--- a/include/asm-i386/vmi_time.h
+++ b/include/asm-x86/vmi_time.h
diff --git a/include/asm-i386/voyager.h b/include/asm-x86/voyager.h
index 91a9932937a..91a9932937a 100644
--- a/include/asm-i386/voyager.h
+++ b/include/asm-x86/voyager.h
diff --git a/include/asm-x86_64/vsyscall.h b/include/asm-x86/vsyscall.h
index 3b8ceb4af2c..3b8ceb4af2c 100644
--- a/include/asm-x86_64/vsyscall.h
+++ b/include/asm-x86/vsyscall.h
diff --git a/include/asm-x86_64/vsyscall32.h b/include/asm-x86/vsyscall32.h
index c631c082f8f..c631c082f8f 100644
--- a/include/asm-x86_64/vsyscall32.h
+++ b/include/asm-x86/vsyscall32.h
diff --git a/include/asm-i386/xen/hypercall.h b/include/asm-x86/xen/hypercall.h
index bc0ee7d961c..bc0ee7d961c 100644
--- a/include/asm-i386/xen/hypercall.h
+++ b/include/asm-x86/xen/hypercall.h
diff --git a/include/asm-i386/xen/hypervisor.h b/include/asm-x86/xen/hypervisor.h
index 8e15dd28c91..8e15dd28c91 100644
--- a/include/asm-i386/xen/hypervisor.h
+++ b/include/asm-x86/xen/hypervisor.h
diff --git a/include/asm-i386/xen/interface.h b/include/asm-x86/xen/interface.h
index 165c3968e13..165c3968e13 100644
--- a/include/asm-i386/xen/interface.h
+++ b/include/asm-x86/xen/interface.h
diff --git a/include/asm-x86/xor.h b/include/asm-x86/xor.h
new file mode 100644
index 00000000000..11b3bb86e17
--- /dev/null
+++ b/include/asm-x86/xor.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "xor_32.h"
+#else
+# include "xor_64.h"
+#endif
diff --git a/include/asm-i386/xor.h b/include/asm-x86/xor_32.h
index 23c86cef3b2..23c86cef3b2 100644
--- a/include/asm-i386/xor.h
+++ b/include/asm-x86/xor_32.h
diff --git a/include/asm-x86_64/xor.h b/include/asm-x86/xor_64.h
index f942fcc2183..f942fcc2183 100644
--- a/include/asm-x86_64/xor.h
+++ b/include/asm-x86/xor_64.h
diff --git a/include/asm-x86_64/Kbuild b/include/asm-x86_64/Kbuild
deleted file mode 100644
index 75a2deffca6..00000000000
--- a/include/asm-x86_64/Kbuild
+++ /dev/null
@@ -1,21 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-ALTARCH := i386
-ARCHDEF := defined __x86_64__
-ALTARCHDEF := defined __i386__
-
-header-y += boot.h
-header-y += bootsetup.h
-header-y += debugreg.h
-header-y += ldt.h
-header-y += msr-index.h
-header-y += prctl.h
-header-y += ptrace-abi.h
-header-y += sigcontext32.h
-header-y += ucontext.h
-header-y += vsyscall32.h
-
-unifdef-y += mce.h
-unifdef-y += msr.h
-unifdef-y += mtrr.h
-unifdef-y += vsyscall.h
diff --git a/include/asm-x86_64/boot.h b/include/asm-x86_64/boot.h
deleted file mode 100644
index 3c46cea8db7..00000000000
--- a/include/asm-x86_64/boot.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-i386/boot.h>
diff --git a/include/asm-x86_64/bootparam.h b/include/asm-x86_64/bootparam.h
deleted file mode 100644
index aa82e5238d8..00000000000
--- a/include/asm-x86_64/bootparam.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-i386/bootparam.h>
diff --git a/include/asm-x86_64/cpu.h b/include/asm-x86_64/cpu.h
deleted file mode 100644
index 8eea076525a..00000000000
--- a/include/asm-x86_64/cpu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-i386/cpu.h>
diff --git a/include/asm-x86_64/cpufeature.h b/include/asm-x86_64/cpufeature.h
deleted file mode 100644
index 8baefc3beb2..00000000000
--- a/include/asm-x86_64/cpufeature.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * cpufeature.h
- *
- * Defines x86 CPU feature bits
- */
-
-#ifndef __ASM_X8664_CPUFEATURE_H
-#define __ASM_X8664_CPUFEATURE_H
-
-#include <asm-i386/cpufeature.h>
-
-#undef cpu_has_vme
-#define cpu_has_vme 0
-
-#undef cpu_has_pae
-#define cpu_has_pae ___BUG___
-
-#undef cpu_has_mp
-#define cpu_has_mp 1 /* XXX */
-
-#undef cpu_has_k6_mtrr
-#define cpu_has_k6_mtrr 0
-
-#undef cpu_has_cyrix_arr
-#define cpu_has_cyrix_arr 0
-
-#undef cpu_has_centaur_mcr
-#define cpu_has_centaur_mcr 0
-
-#endif /* __ASM_X8664_CPUFEATURE_H */
diff --git a/include/asm-x86_64/emergency-restart.h b/include/asm-x86_64/emergency-restart.h
deleted file mode 100644
index 680c3956334..00000000000
--- a/include/asm-x86_64/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-extern void machine_emergency_restart(void);
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-x86_64/fcntl.h b/include/asm-x86_64/fcntl.h
deleted file mode 100644
index 46ab12db573..00000000000
--- a/include/asm-x86_64/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/fcntl.h>
diff --git a/include/asm-x86_64/hpet.h b/include/asm-x86_64/hpet.h
deleted file mode 100644
index 79bb950f82c..00000000000
--- a/include/asm-x86_64/hpet.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _ASM_X8664_HPET_H
-#define _ASM_X8664_HPET_H 1
-
-#include <asm-i386/hpet.h>
-
-#define HPET_TICK_RATE (HZ * 100000UL)
-
-extern int hpet_rtc_timer_init(void);
-extern int hpet_arch_init(void);
-extern int hpet_timer_stop_set_go(unsigned long tick);
-extern int hpet_reenable(void);
-extern unsigned int hpet_calibrate_tsc(void);
-
-extern int hpet_use_timer;
-extern unsigned long hpet_period;
-extern unsigned long hpet_tick;
-
-#endif
diff --git a/include/asm-x86_64/hypertransport.h b/include/asm-x86_64/hypertransport.h
deleted file mode 100644
index 5cbf9fa5e0b..00000000000
--- a/include/asm-x86_64/hypertransport.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-i386/hypertransport.h>
diff --git a/include/asm-x86_64/ide.h b/include/asm-x86_64/ide.h
deleted file mode 100644
index 4cef0ef6187..00000000000
--- a/include/asm-x86_64/ide.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-i386/ide.h>
diff --git a/include/asm-x86_64/ioctl.h b/include/asm-x86_64/ioctl.h
deleted file mode 100644
index b279fe06dfe..00000000000
--- a/include/asm-x86_64/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-x86_64/ist.h b/include/asm-x86_64/ist.h
deleted file mode 100644
index 338857ecbc6..00000000000
--- a/include/asm-x86_64/ist.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-i386/ist.h>
diff --git a/include/asm-x86_64/msidef.h b/include/asm-x86_64/msidef.h
deleted file mode 100644
index 083ad5827e4..00000000000
--- a/include/asm-x86_64/msidef.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-i386/msidef.h>
diff --git a/include/asm-x86_64/msr-index.h b/include/asm-x86_64/msr-index.h
deleted file mode 100644
index d77a63f1ddf..00000000000
--- a/include/asm-x86_64/msr-index.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-i386/msr-index.h>
diff --git a/include/asm-x86_64/node.h b/include/asm-x86_64/node.h
deleted file mode 100644
index 0ee6f88db04..00000000000
--- a/include/asm-x86_64/node.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-i386/node.h>
diff --git a/include/asm-x86_64/poll.h b/include/asm-x86_64/poll.h
deleted file mode 100644
index c98509d3149..00000000000
--- a/include/asm-x86_64/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/include/asm-x86_64/processor-flags.h b/include/asm-x86_64/processor-flags.h
deleted file mode 100644
index ec99a57b2c6..00000000000
--- a/include/asm-x86_64/processor-flags.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-i386/processor-flags.h>
diff --git a/include/asm-x86_64/socket.h b/include/asm-x86_64/socket.h
deleted file mode 100644
index 90af60cf3c0..00000000000
--- a/include/asm-x86_64/socket.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-x86_64/spinlock_types.h b/include/asm-x86_64/spinlock_types.h
deleted file mode 100644
index 4da9345c150..00000000000
--- a/include/asm-x86_64/spinlock_types.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_SPINLOCK_TYPES_H
-#define __ASM_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
- unsigned int slock;
-} raw_spinlock_t;
-
-#define __RAW_SPIN_LOCK_UNLOCKED { 1 }
-
-typedef struct {
- unsigned int lock;
-} raw_rwlock_t;
-
-#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS }
-
-#endif
diff --git a/include/asm-x86_64/therm_throt.h b/include/asm-x86_64/therm_throt.h
deleted file mode 100644
index 5aac059007b..00000000000
--- a/include/asm-x86_64/therm_throt.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-i386/therm_throt.h>
diff --git a/include/asm-x86_64/tsc.h b/include/asm-x86_64/tsc.h
deleted file mode 100644
index d66ba6ef25f..00000000000
--- a/include/asm-x86_64/tsc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-i386/tsc.h>
diff --git a/include/asm-x86_64/vga.h b/include/asm-x86_64/vga.h
deleted file mode 100644
index 0ecf68ac03a..00000000000
--- a/include/asm-x86_64/vga.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Access to VGA videoram
- *
- * (c) 1998 Martin Mares <mj@ucw.cz>
- */
-
-#ifndef _LINUX_ASM_VGA_H_
-#define _LINUX_ASM_VGA_H_
-
-/*
- * On the PC, we can just recalculate addresses and then
- * access the videoram directly without any black magic.
- */
-
-#define VGA_MAP_MEM(x,s) (unsigned long)phys_to_virt(x)
-
-#define vga_readb(x) (*(x))
-#define vga_writeb(x,y) (*(y) = (x))
-
-#endif
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index b6901486571..a271b67a8e2 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -119,6 +119,7 @@
#define I2C_DRIVERID_WM8750 90 /* Wolfson WM8750 audio codec */
#define I2C_DRIVERID_WM8753 91 /* Wolfson WM8753 audio codec */
#define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */
+#define I2C_DRIVERID_VP27SMPX 93 /* Panasonic VP27s tuner internal MPX */
#define I2C_DRIVERID_I2CDEV 900
#define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */
@@ -196,6 +197,7 @@
#define I2C_HW_B_EM28XX 0x01001f /* em28xx video capture cards */
#define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */
#define I2C_HW_B_INTELFB 0x010021 /* intel framebuffer driver */
+#define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */
/* --- PCF 8584 based algorithms */
#define I2C_HW_P_LP 0x020000 /* Parallel port interface */
diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h
new file mode 100644
index 00000000000..794b8daa937
--- /dev/null
+++ b/include/linux/ivtv.h
@@ -0,0 +1,72 @@
+/*
+ Public ivtv API header
+ Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
+ Copyright (C) 2004-2007 Hans Verkuil <hverkuil@xs4all.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_IVTV_H__
+#define __LINUX_IVTV_H__
+
+#ifdef __KERNEL__
+#include <linux/compiler.h> /* need __user */
+#else
+#define __user
+#endif
+#include <linux/types.h>
+
+/* ivtv knows several distinct output modes: MPEG streaming,
+ YUV streaming, YUV updates through user DMA and the passthrough
+ mode.
+
+ In order to clearly tell the driver that we are in user DMA
+ YUV mode you need to call IVTV_IOC_DMA_FRAME with y_source == NULL
+ first (althrough if you don't then the first time
+ DMA_FRAME is called the mode switch is done automatically).
+
+ When you close the file handle the user DMA mode is exited again.
+
+ While in one mode, you cannot use another mode (EBUSY is returned).
+
+ All this means that if you want to change the YUV interlacing
+ for the user DMA YUV mode you first need to do call IVTV_IOC_DMA_FRAME
+ with y_source == NULL before you can set the correct format using
+ VIDIOC_S_FMT.
+
+ Eventually all this should be replaced with a proper V4L2 API,
+ but for now we have to do it this way. */
+
+struct ivtv_dma_frame {
+ enum v4l2_buf_type type; /* V4L2_BUF_TYPE_VIDEO_OUTPUT */
+ __u32 pixelformat; /* 0 == same as destination */
+ void __user *y_source; /* if NULL and type == V4L2_BUF_TYPE_VIDEO_OUTPUT,
+ then just switch to user DMA YUV output mode */
+ void __user *uv_source; /* Unused for RGB pixelformats */
+ struct v4l2_rect src;
+ struct v4l2_rect dst;
+ __u32 src_width;
+ __u32 src_height;
+};
+
+#define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame)
+
+/* These are the VBI types as they appear in the embedded VBI private packets. */
+#define IVTV_SLICED_TYPE_TELETEXT_B (1)
+#define IVTV_SLICED_TYPE_CAPTION_525 (4)
+#define IVTV_SLICED_TYPE_WSS_625 (5)
+#define IVTV_SLICED_TYPE_VPS (7)
+
+#endif /* _LINUX_IVTV_H */
diff --git a/include/linux/ivtvfb.h b/include/linux/ivtvfb.h
new file mode 100644
index 00000000000..e980ba62ddc
--- /dev/null
+++ b/include/linux/ivtvfb.h
@@ -0,0 +1,42 @@
+/*
+ On Screen Display cx23415 Framebuffer driver
+
+ Copyright (C) 2006, 2007 Ian Armstrong <ian@iarmst.demon.co.uk>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_IVTVFB_H__
+#define __LINUX_IVTVFB_H__
+
+#ifdef __KERNEL__
+#include <linux/compiler.h> /* need __user */
+#else
+#define __user
+#endif
+#include <linux/types.h>
+
+/* Framebuffer external API */
+
+struct ivtvfb_dma_frame {
+ void __user *source;
+ unsigned long dest_offset;
+ int count;
+};
+
+#define IVTVFB_IOC_DMA_FRAME _IOW('V', BASE_VIDIOC_PRIVATE+0, struct ivtvfb_dma_frame)
+#define FBIO_WAITFORVSYNC _IOW('F', 0x20, u_int32_t)
+
+#endif
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index badf702fcff..0d508ac17d6 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -55,7 +55,28 @@ struct sd_switch_caps {
unsigned int hs_max_dtr;
};
+struct sdio_cccr {
+ unsigned int sdio_vsn;
+ unsigned int sd_vsn;
+ unsigned int multi_block:1,
+ low_speed:1,
+ wide_bus:1,
+ high_power:1,
+ high_speed:1;
+};
+
+struct sdio_cis {
+ unsigned short vendor;
+ unsigned short device;
+ unsigned short blksize;
+ unsigned int max_dtr;
+};
+
struct mmc_host;
+struct sdio_func;
+struct sdio_func_tuple;
+
+#define SDIO_MAX_FUNCS 7
/*
* MMC device
@@ -67,11 +88,13 @@ struct mmc_card {
unsigned int type; /* card type */
#define MMC_TYPE_MMC 0 /* MMC card */
#define MMC_TYPE_SD 1 /* SD card */
+#define MMC_TYPE_SDIO 2 /* SDIO card */
unsigned int state; /* (our) card state */
#define MMC_STATE_PRESENT (1<<0) /* present in sysfs */
#define MMC_STATE_READONLY (1<<1) /* card is read-only */
#define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */
#define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */
+
u32 raw_cid[4]; /* raw card CID */
u32 raw_csd[4]; /* raw card CSD */
u32 raw_scr[2]; /* raw card SCR */
@@ -80,10 +103,19 @@ struct mmc_card {
struct mmc_ext_csd ext_csd; /* mmc v4 extended card specific */
struct sd_scr scr; /* extra SD information */
struct sd_switch_caps sw_caps; /* switch (CMD6) caps */
+
+ unsigned int sdio_funcs; /* number of SDIO functions */
+ struct sdio_cccr cccr; /* common card info */
+ struct sdio_cis cis; /* common tuple info */
+ struct sdio_func *sdio_func[SDIO_MAX_FUNCS]; /* SDIO functions (devices) */
+ unsigned num_info; /* number of info strings */
+ const char **info; /* info strings */
+ struct sdio_func_tuple *tuples; /* unknown common tuples */
};
#define mmc_card_mmc(c) ((c)->type == MMC_TYPE_MMC)
#define mmc_card_sd(c) ((c)->type == MMC_TYPE_SD)
+#define mmc_card_sdio(c) ((c)->type == MMC_TYPE_SDIO)
#define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT)
#define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 63a80ea6112..d0c3abed74c 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -25,14 +25,20 @@ struct mmc_command {
#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
-#define MMC_CMD_MASK (3 << 5) /* command type */
+
+#define MMC_CMD_MASK (3 << 5) /* non-SPI command type */
#define MMC_CMD_AC (0 << 5)
#define MMC_CMD_ADTC (1 << 5)
#define MMC_CMD_BC (2 << 5)
#define MMC_CMD_BCR (3 << 5)
+#define MMC_RSP_SPI_S1 (1 << 7) /* one status byte */
+#define MMC_RSP_SPI_S2 (1 << 8) /* second byte */
+#define MMC_RSP_SPI_B4 (1 << 9) /* four data bytes */
+#define MMC_RSP_SPI_BUSY (1 << 10) /* card may send busy */
+
/*
- * These are the response types, and correspond to valid bit
+ * These are the native response types, and correspond to valid bit
* patterns of the above flags. One additional valid pattern
* is all zeros, which means we don't expect a response.
*/
@@ -41,12 +47,30 @@ struct mmc_command {
#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
+#define MMC_RSP_R4 (MMC_RSP_PRESENT)
+#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
/*
+ * These are the SPI response types for MMC, SD, and SDIO cards.
+ * Commands return R1, with maybe more info. Zero is an error type;
+ * callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
+ */
+#define MMC_RSP_SPI_R1 (MMC_RSP_SPI_S1)
+#define MMC_RSP_SPI_R1B (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
+#define MMC_RSP_SPI_R2 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
+#define MMC_RSP_SPI_R3 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+#define MMC_RSP_SPI_R4 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+#define MMC_RSP_SPI_R5 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
+#define MMC_RSP_SPI_R7 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+
+#define mmc_spi_resp_type(cmd) ((cmd)->flags & \
+ (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4))
+
+/*
* These are the command types.
*/
#define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_MASK)
@@ -54,12 +78,19 @@ struct mmc_command {
unsigned int retries; /* max number of retries */
unsigned int error; /* command error */
-#define MMC_ERR_NONE 0
-#define MMC_ERR_TIMEOUT 1
-#define MMC_ERR_BADCRC 2
-#define MMC_ERR_FIFO 3
-#define MMC_ERR_FAILED 4
-#define MMC_ERR_INVALID 5
+/*
+ * Standard errno values are used for errors, but some have specific
+ * meaning in the MMC layer:
+ *
+ * ETIMEDOUT Card took too long to respond
+ * EILSEQ Basic format problem with the received or sent data
+ * (e.g. CRC check failed, incorrect opcode in response
+ * or bad end bit)
+ * EINVAL Request cannot be performed because of restrictions
+ * in hardware and/or the driver
+ * ENOMEDIUM Host can determine that the slot is empty and is
+ * actively failing requests
+ */
struct mmc_data *data; /* data segment associated with cmd */
struct mmc_request *mrq; /* associated request */
@@ -76,7 +107,6 @@ struct mmc_data {
#define MMC_DATA_WRITE (1 << 8)
#define MMC_DATA_READ (1 << 9)
#define MMC_DATA_STREAM (1 << 10)
-#define MMC_DATA_MULTI (1 << 11)
unsigned int bytes_xfered;
@@ -104,9 +134,20 @@ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
struct mmc_command *, int);
-extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *, int);
+extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
-extern void mmc_claim_host(struct mmc_host *host);
+extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
extern void mmc_release_host(struct mmc_host *host);
+/**
+ * mmc_claim_host - exclusively claim a host
+ * @host: mmc host to claim
+ *
+ * Claim a host for a set of operations.
+ */
+static inline void mmc_claim_host(struct mmc_host *host)
+{
+ __mmc_claim_host(host, NULL);
+}
+
#endif
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index b1350dfd3e9..125eee1407f 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -10,6 +10,8 @@
#ifndef LINUX_MMC_HOST_H
#define LINUX_MMC_HOST_H
+#include <linux/leds.h>
+
#include <linux/mmc/core.h>
struct mmc_ios {
@@ -51,6 +53,7 @@ struct mmc_host_ops {
void (*request)(struct mmc_host *host, struct mmc_request *req);
void (*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
int (*get_ro)(struct mmc_host *host);
+ void (*enable_sdio_irq)(struct mmc_host *host, int enable);
};
struct mmc_card;
@@ -87,9 +90,10 @@ struct mmc_host {
#define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */
#define MMC_CAP_MULTIWRITE (1 << 1) /* Can accurately report bytes sent to card on error */
-#define MMC_CAP_BYTEBLOCK (1 << 2) /* Can do non-log2 block sizes */
-#define MMC_CAP_MMC_HIGHSPEED (1 << 3) /* Can do MMC high-speed timing */
-#define MMC_CAP_SD_HIGHSPEED (1 << 4) /* Can do SD high-speed timing */
+#define MMC_CAP_MMC_HIGHSPEED (1 << 2) /* Can do MMC high-speed timing */
+#define MMC_CAP_SD_HIGHSPEED (1 << 3) /* Can do SD high-speed timing */
+#define MMC_CAP_SDIO_IRQ (1 << 4) /* Can signal pending SDIO IRQs */
+#define MMC_CAP_SPI (1 << 5) /* Talks only SPI protocols */
/* host specific block data */
unsigned int max_seg_size; /* see blk_queue_max_segment_size */
@@ -106,6 +110,14 @@ struct mmc_host {
struct mmc_ios ios; /* current io bus settings */
u32 ocr; /* the current OCR setting */
+ /* group bitfields together to minimize padding */
+ unsigned int use_spi_crc:1;
+ unsigned int claimed:1; /* host exclusively claimed */
+ unsigned int bus_dead:1; /* bus has been released */
+#ifdef CONFIG_MMC_DEBUG
+ unsigned int removed:1; /* host is being removed */
+#endif
+
unsigned int mode; /* current card mode of host */
#define MMC_MODE_MMC 0
#define MMC_MODE_SD 1
@@ -113,16 +125,19 @@ struct mmc_host {
struct mmc_card *card; /* device attached to this host */
wait_queue_head_t wq;
- unsigned int claimed:1; /* host exclusively claimed */
struct delayed_work detect;
-#ifdef CONFIG_MMC_DEBUG
- unsigned int removed:1; /* host is being removed */
-#endif
const struct mmc_bus_ops *bus_ops; /* current bus driver */
unsigned int bus_refs; /* reference counter */
- unsigned int bus_dead:1; /* bus has been released */
+
+ unsigned int sdio_irqs;
+ struct task_struct *sdio_irq_thread;
+ atomic_t sdio_irq_thread_abort;
+
+#ifdef CONFIG_LEDS_TRIGGERS
+ struct led_trigger *led; /* activity led */
+#endif
unsigned long private[0] ____cacheline_aligned;
};
@@ -137,6 +152,8 @@ static inline void *mmc_priv(struct mmc_host *host)
return (void *)host->private;
}
+#define mmc_host_is_spi(host) ((host)->caps & MMC_CAP_SPI)
+
#define mmc_dev(x) ((x)->parent)
#define mmc_classdev(x) (&(x)->class_dev)
#define mmc_hostname(x) ((x)->class_dev.bus_id)
@@ -147,5 +164,11 @@ extern int mmc_resume_host(struct mmc_host *);
extern void mmc_detect_change(struct mmc_host *, unsigned long delay);
extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
+static inline void mmc_signal_sdio_irq(struct mmc_host *host)
+{
+ host->ops->enable_sdio_irq(host, 0);
+ wake_up_process(host->sdio_irq_thread);
+}
+
#endif
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index e3ed9b95040..4236fbf0b6f 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -27,7 +27,7 @@
/* Standard MMC commands (4.1) type argument response */
/* class 1 */
-#define MMC_GO_IDLE_STATE 0 /* bc */
+#define MMC_GO_IDLE_STATE 0 /* bc */
#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */
#define MMC_ALL_SEND_CID 2 /* bcr R2 */
#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
@@ -39,8 +39,10 @@
#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */
#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
#define MMC_STOP_TRANSMISSION 12 /* ac R1b */
-#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
+#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */
+#define MMC_SPI_READ_OCR 58 /* spi spi_R3 */
+#define MMC_SPI_CRC_ON_OFF 59 /* spi [0:0] flag spi_R1 */
/* class 2 */
#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */
@@ -90,15 +92,15 @@
*/
/*
- MMC status in R1
+ MMC status in R1, for native mode (SPI bits are different)
Type
- e : error bit
+ e : error bit
s : status bit
r : detected and set for the actual command response
x : detected and set during command execution. the host must poll
the card by sending status command in order to read these bits.
Clear condition
- a : according to the card state
+ a : according to the card state
b : always related to the previous command. Reception of
a valid command will clear it (with a delay of one command)
c : clear by read
@@ -124,10 +126,33 @@
#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */
#define R1_ERASE_RESET (1 << 13) /* sr, c */
#define R1_STATUS(x) (x & 0xFFFFE000)
-#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
+#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
#define R1_READY_FOR_DATA (1 << 8) /* sx, a */
#define R1_APP_CMD (1 << 5) /* sr, c */
+/*
+ * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
+ * R1 is the low order byte; R2 is the next highest byte, when present.
+ */
+#define R1_SPI_IDLE (1 << 0)
+#define R1_SPI_ERASE_RESET (1 << 1)
+#define R1_SPI_ILLEGAL_COMMAND (1 << 2)
+#define R1_SPI_COM_CRC (1 << 3)
+#define R1_SPI_ERASE_SEQ (1 << 4)
+#define R1_SPI_ADDRESS (1 << 5)
+#define R1_SPI_PARAMETER (1 << 6)
+/* R1 bit 7 is always zero */
+#define R2_SPI_CARD_LOCKED (1 << 8)
+#define R2_SPI_WP_ERASE_SKIP (1 << 9) /* or lock/unlock fail */
+#define R2_SPI_LOCK_UNLOCK_FAIL R2_SPI_WP_ERASE_SKIP
+#define R2_SPI_ERROR (1 << 10)
+#define R2_SPI_CC_ERROR (1 << 11)
+#define R2_SPI_CARD_ECC_ERROR (1 << 12)
+#define R2_SPI_WP_VIOLATION (1 << 13)
+#define R2_SPI_ERASE_PARAM (1 << 14)
+#define R2_SPI_OUT_OF_RANGE (1 << 15) /* or CSD overwrite */
+#define R2_SPI_CSD_OVERWRITE R2_SPI_OUT_OF_RANGE
+
/* These are unpacked versions of the actual responses */
struct _mmc_csd {
@@ -182,6 +207,7 @@ struct _mmc_csd {
*/
#define CCC_BASIC (1<<0) /* (0) Basic protocol functions */
/* (CMD0,1,2,3,4,7,9,10,12,13,15) */
+ /* (and for SPI, CMD58,59) */
#define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */
/* (CMD11) */
#define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */
@@ -227,6 +253,7 @@ struct _mmc_csd {
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
#define EXT_CSD_HS_TIMING 185 /* R/W */
#define EXT_CSD_CARD_TYPE 196 /* RO */
+#define EXT_CSD_REV 192 /* RO */
#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
/*
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
new file mode 100644
index 00000000000..47ba464f517
--- /dev/null
+++ b/include/linux/mmc/sdio.h
@@ -0,0 +1,159 @@
+/*
+ * include/linux/mmc/sdio.h
+ *
+ * Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef MMC_SDIO_H
+#define MMC_SDIO_H
+
+/* SDIO commands type argument response */
+#define SD_IO_SEND_OP_COND 5 /* bcr [23:0] OCR R4 */
+#define SD_IO_RW_DIRECT 52 /* ac [31:0] See below R5 */
+#define SD_IO_RW_EXTENDED 53 /* adtc [31:0] See below R5 */
+
+/*
+ * SD_IO_RW_DIRECT argument format:
+ *
+ * [31] R/W flag
+ * [30:28] Function number
+ * [27] RAW flag
+ * [25:9] Register address
+ * [7:0] Data
+ */
+
+/*
+ * SD_IO_RW_EXTENDED argument format:
+ *
+ * [31] R/W flag
+ * [30:28] Function number
+ * [27] Block mode
+ * [26] Increment address
+ * [25:9] Register address
+ * [8:0] Byte/block count
+ */
+
+/*
+ SDIO status in R5
+ Type
+ e : error bit
+ s : status bit
+ r : detected and set for the actual command response
+ x : detected and set during command execution. the host must poll
+ the card by sending status command in order to read these bits.
+ Clear condition
+ a : according to the card state
+ b : always related to the previous command. Reception of
+ a valid command will clear it (with a delay of one command)
+ c : clear by read
+ */
+
+#define R5_COM_CRC_ERROR (1 << 15) /* er, b */
+#define R5_ILLEGAL_COMMAND (1 << 14) /* er, b */
+#define R5_ERROR (1 << 11) /* erx, c */
+#define R5_FUNCTION_NUMBER (1 << 9) /* er, c */
+#define R5_OUT_OF_RANGE (1 << 8) /* er, c */
+#define R5_STATUS(x) (x & 0xCB00)
+#define R5_IO_CURRENT_STATE(x) ((x & 0x3000) >> 12) /* s, b */
+
+/*
+ * Card Common Control Registers (CCCR)
+ */
+
+#define SDIO_CCCR_CCCR 0x00
+
+#define SDIO_CCCR_REV_1_00 0 /* CCCR/FBR Version 1.00 */
+#define SDIO_CCCR_REV_1_10 1 /* CCCR/FBR Version 1.10 */
+#define SDIO_CCCR_REV_1_20 2 /* CCCR/FBR Version 1.20 */
+
+#define SDIO_SDIO_REV_1_00 0 /* SDIO Spec Version 1.00 */
+#define SDIO_SDIO_REV_1_10 1 /* SDIO Spec Version 1.10 */
+#define SDIO_SDIO_REV_1_20 2 /* SDIO Spec Version 1.20 */
+#define SDIO_SDIO_REV_2_00 3 /* SDIO Spec Version 2.00 */
+
+#define SDIO_CCCR_SD 0x01
+
+#define SDIO_SD_REV_1_01 0 /* SD Physical Spec Version 1.01 */
+#define SDIO_SD_REV_1_10 1 /* SD Physical Spec Version 1.10 */
+#define SDIO_SD_REV_2_00 2 /* SD Physical Spec Version 2.00 */
+
+#define SDIO_CCCR_IOEx 0x02
+#define SDIO_CCCR_IORx 0x03
+
+#define SDIO_CCCR_IENx 0x04 /* Function/Master Interrupt Enable */
+#define SDIO_CCCR_INTx 0x05 /* Function Interrupt Pending */
+
+#define SDIO_CCCR_ABORT 0x06 /* function abort/card reset */
+
+#define SDIO_CCCR_IF 0x07 /* bus interface controls */
+
+#define SDIO_BUS_WIDTH_1BIT 0x00
+#define SDIO_BUS_WIDTH_4BIT 0x02
+
+#define SDIO_BUS_CD_DISABLE 0x80 /* disable pull-up on DAT3 (pin 1) */
+
+#define SDIO_CCCR_CAPS 0x08
+
+#define SDIO_CCCR_CAP_SDC 0x01 /* can do CMD52 while data transfer */
+#define SDIO_CCCR_CAP_SMB 0x02 /* can do multi-block xfers (CMD53) */
+#define SDIO_CCCR_CAP_SRW 0x04 /* supports read-wait protocol */
+#define SDIO_CCCR_CAP_SBS 0x08 /* supports suspend/resume */
+#define SDIO_CCCR_CAP_S4MI 0x10 /* interrupt during 4-bit CMD53 */
+#define SDIO_CCCR_CAP_E4MI 0x20 /* enable ints during 4-bit CMD53 */
+#define SDIO_CCCR_CAP_LSC 0x40 /* low speed card */
+#define SDIO_CCCR_CAP_4BLS 0x80 /* 4 bit low speed card */
+
+#define SDIO_CCCR_CIS 0x09 /* common CIS pointer (3 bytes) */
+
+/* Following 4 regs are valid only if SBS is set */
+#define SDIO_CCCR_SUSPEND 0x0c
+#define SDIO_CCCR_SELx 0x0d
+#define SDIO_CCCR_EXECx 0x0e
+#define SDIO_CCCR_READYx 0x0f
+
+#define SDIO_CCCR_BLKSIZE 0x10
+
+#define SDIO_CCCR_POWER 0x12
+
+#define SDIO_POWER_SMPC 0x01 /* Supports Master Power Control */
+#define SDIO_POWER_EMPC 0x02 /* Enable Master Power Control */
+
+#define SDIO_CCCR_SPEED 0x13
+
+#define SDIO_SPEED_SHS 0x01 /* Supports High-Speed mode */
+#define SDIO_SPEED_EHS 0x02 /* Enable High-Speed mode */
+
+/*
+ * Function Basic Registers (FBR)
+ */
+
+#define SDIO_FBR_BASE(f) ((f) * 0x100) /* base of function f's FBRs */
+
+#define SDIO_FBR_STD_IF 0x00
+
+#define SDIO_FBR_SUPPORTS_CSA 0x40 /* supports Code Storage Area */
+#define SDIO_FBR_ENABLE_CSA 0x80 /* enable Code Storage Area */
+
+#define SDIO_FBR_STD_IF_EXT 0x01
+
+#define SDIO_FBR_POWER 0x02
+
+#define SDIO_FBR_POWER_SPS 0x01 /* Supports Power Selection */
+#define SDIO_FBR_POWER_EPS 0x02 /* Enable (low) Power Selection */
+
+#define SDIO_FBR_CIS 0x09 /* CIS pointer (3 bytes) */
+
+
+#define SDIO_FBR_CSA 0x0C /* CSA pointer (3 bytes) */
+
+#define SDIO_FBR_CSA_DATA 0x0F
+
+#define SDIO_FBR_BLKSIZE 0x10 /* block size (2 bytes) */
+
+#endif
+
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
new file mode 100644
index 00000000000..b050f4d7b41
--- /dev/null
+++ b/include/linux/mmc/sdio_func.h
@@ -0,0 +1,153 @@
+/*
+ * include/linux/mmc/sdio_func.h
+ *
+ * Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef MMC_SDIO_FUNC_H
+#define MMC_SDIO_FUNC_H
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+struct mmc_card;
+struct sdio_func;
+
+typedef void (sdio_irq_handler_t)(struct sdio_func *);
+
+/*
+ * SDIO function CIS tuple (unknown to the core)
+ */
+struct sdio_func_tuple {
+ struct sdio_func_tuple *next;
+ unsigned char code;
+ unsigned char size;
+ unsigned char data[0];
+};
+
+/*
+ * SDIO function devices
+ */
+struct sdio_func {
+ struct mmc_card *card; /* the card this device belongs to */
+ struct device dev; /* the device */
+ sdio_irq_handler_t *irq_handler; /* IRQ callback */
+ unsigned int num; /* function number */
+
+ unsigned char class; /* standard interface class */
+ unsigned short vendor; /* vendor id */
+ unsigned short device; /* device id */
+
+ unsigned max_blksize; /* maximum block size */
+ unsigned cur_blksize; /* current block size */
+
+ unsigned int state; /* function state */
+#define SDIO_STATE_PRESENT (1<<0) /* present in sysfs */
+
+ u8 tmpbuf[4]; /* DMA:able scratch buffer */
+
+ unsigned num_info; /* number of info strings */
+ const char **info; /* info strings */
+
+ struct sdio_func_tuple *tuples;
+};
+
+#define sdio_func_present(f) ((f)->state & SDIO_STATE_PRESENT)
+
+#define sdio_func_set_present(f) ((f)->state |= SDIO_STATE_PRESENT)
+
+#define sdio_func_id(f) ((f)->dev.bus_id)
+
+#define sdio_get_drvdata(f) dev_get_drvdata(&(f)->dev)
+#define sdio_set_drvdata(f,d) dev_set_drvdata(&(f)->dev, d)
+
+/*
+ * SDIO function device driver
+ */
+struct sdio_driver {
+ char *name;
+ const struct sdio_device_id *id_table;
+
+ int (*probe)(struct sdio_func *, const struct sdio_device_id *);
+ void (*remove)(struct sdio_func *);
+
+ struct device_driver drv;
+};
+
+/**
+ * SDIO_DEVICE - macro used to describe a specific SDIO device
+ * @vend: the 16 bit manufacturer code
+ * @dev: the 16 bit function id
+ *
+ * This macro is used to create a struct sdio_device_id that matches a
+ * specific device. The class field will be set to SDIO_ANY_ID.
+ */
+#define SDIO_DEVICE(vend,dev) \
+ .class = SDIO_ANY_ID, \
+ .vendor = (vend), .device = (dev)
+
+/**
+ * SDIO_DEVICE_CLASS - macro used to describe a specific SDIO device class
+ * @dev_class: the 8 bit standard interface code
+ *
+ * This macro is used to create a struct sdio_device_id that matches a
+ * specific standard SDIO function type. The vendor and device fields will
+ * be set to SDIO_ANY_ID.
+ */
+#define SDIO_DEVICE_CLASS(dev_class) \
+ .class = (dev_class), \
+ .vendor = SDIO_ANY_ID, .device = SDIO_ANY_ID
+
+extern int sdio_register_driver(struct sdio_driver *);
+extern void sdio_unregister_driver(struct sdio_driver *);
+
+/*
+ * SDIO I/O operations
+ */
+extern void sdio_claim_host(struct sdio_func *func);
+extern void sdio_release_host(struct sdio_func *func);
+
+extern int sdio_enable_func(struct sdio_func *func);
+extern int sdio_disable_func(struct sdio_func *func);
+
+extern int sdio_set_block_size(struct sdio_func *func, unsigned blksz);
+
+extern int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler);
+extern int sdio_release_irq(struct sdio_func *func);
+
+extern unsigned char sdio_readb(struct sdio_func *func,
+ unsigned int addr, int *err_ret);
+extern unsigned short sdio_readw(struct sdio_func *func,
+ unsigned int addr, int *err_ret);
+extern unsigned long sdio_readl(struct sdio_func *func,
+ unsigned int addr, int *err_ret);
+
+extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
+ unsigned int addr, int count);
+extern int sdio_readsb(struct sdio_func *func, void *dst,
+ unsigned int addr, int count);
+
+extern void sdio_writeb(struct sdio_func *func, unsigned char b,
+ unsigned int addr, int *err_ret);
+extern void sdio_writew(struct sdio_func *func, unsigned short b,
+ unsigned int addr, int *err_ret);
+extern void sdio_writel(struct sdio_func *func, unsigned long b,
+ unsigned int addr, int *err_ret);
+
+extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
+ void *src, int count);
+extern int sdio_writesb(struct sdio_func *func, unsigned int addr,
+ void *src, int count);
+
+extern unsigned char sdio_f0_readb(struct sdio_func *func,
+ unsigned int addr, int *err_ret);
+extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b,
+ unsigned int addr, int *err_ret);
+
+#endif
+
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
new file mode 100644
index 00000000000..09306d47ff5
--- /dev/null
+++ b/include/linux/mmc/sdio_ids.h
@@ -0,0 +1,23 @@
+/*
+ * SDIO Classes, Interface Types, Manufacturer IDs, etc.
+ */
+
+#ifndef MMC_SDIO_IDS_H
+#define MMC_SDIO_IDS_H
+
+/*
+ * Standard SDIO Function Interfaces
+ */
+
+#define SDIO_CLASS_NONE 0x00 /* Not a SDIO standard interface */
+#define SDIO_CLASS_UART 0x01 /* standard UART interface */
+#define SDIO_CLASS_BT_A 0x02 /* Type-A BlueTooth std interface */
+#define SDIO_CLASS_BT_B 0x03 /* Type-B BlueTooth std interface */
+#define SDIO_CLASS_GPS 0x04 /* GPS standard interface */
+#define SDIO_CLASS_CAMERA 0x05 /* Camera standard interface */
+#define SDIO_CLASS_PHS 0x06 /* PHS standard interface */
+#define SDIO_CLASS_WLAN 0x07 /* WLAN interface */
+#define SDIO_CLASS_ATA 0x08 /* Embedded SDIO-ATA std interface */
+
+
+#endif
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 4dc5fa8be78..e47e5951058 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -340,4 +340,15 @@ struct parisc_device_id {
#define PA_HVERSION_ANY_ID 0xffff
#define PA_SVERSION_ANY_ID 0xffffffff
+/* SDIO */
+
+#define SDIO_ANY_ID (~0)
+
+struct sdio_device_id {
+ __u8 class; /* Standard interface or SDIO_ANY_ID */
+ __u16 vendor; /* Vendor or SDIO_ANY_ID */
+ __u16 device; /* Device ID or SDIO_ANY_ID */
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
#endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 506b9ae241f..cfee06bca2d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1471,6 +1471,8 @@
#define PCI_DEVICE_ID_RICOH_RL5C476 0x0476
#define PCI_DEVICE_ID_RICOH_RL5C478 0x0478
#define PCI_DEVICE_ID_RICOH_R5C822 0x0822
+#define PCI_DEVICE_ID_RICOH_R5C832 0x0832
+#define PCI_DEVICE_ID_RICOH_R5C843 0x0843
#define PCI_VENDOR_ID_DLINK 0x1186
#define PCI_DEVICE_ID_DLINK_DGE510T 0x4c00
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
new file mode 100644
index 00000000000..e9bbe3ebd72
--- /dev/null
+++ b/include/linux/spi/mmc_spi.h
@@ -0,0 +1,33 @@
+#ifndef __LINUX_SPI_MMC_SPI_H
+#define __LINUX_SPI_MMC_SPI_H
+
+struct device;
+struct mmc_host;
+
+/* Put this in platform_data of a device being used to manage an MMC/SD
+ * card slot. (Modeled after PXA mmc glue; see that for usage examples.)
+ *
+ * REVISIT This is not a spi-specific notion. Any card slot should be
+ * able to handle it. If the MMC core doesn't adopt this kind of notion,
+ * switch the "struct device *" parameters over to "struct spi_device *".
+ */
+struct mmc_spi_platform_data {
+ /* driver activation and (optional) card detect irq hookup */
+ int (*init)(struct device *,
+ irqreturn_t (*)(int, void *),
+ void *);
+ void (*exit)(struct device *, void *);
+
+ /* sense switch on sd cards */
+ int (*get_ro)(struct device *);
+
+ /* how long to debounce card detect, in msecs */
+ u16 detect_delay;
+
+ /* power management */
+ u16 powerup_msecs; /* delay of up to 250 msec */
+ u32 ocr_mask; /* available voltages */
+ void (*setpower)(struct device *, unsigned int maskval);
+};
+
+#endif /* __LINUX_SPI_MMC_SPI_H */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index ae9b24c12f6..1f503e94eff 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -271,6 +271,7 @@ struct v4l2_pix_format
/* Pixel format FOURCC depth Description */
#define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R','G','B','1') /* 8 RGB-3-3-2 */
+#define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R','4','4','4') /* 16 xxxxrrrr ggggbbbb */
#define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R','G','B','O') /* 16 RGB-5-5-5 */
#define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R','G','B','P') /* 16 RGB-5-6-5 */
#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R','G','B','Q') /* 16 RGB-5-5-5 BE */
@@ -280,6 +281,7 @@ struct v4l2_pix_format
#define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B','G','R','4') /* 32 BGR-8-8-8-8 */
#define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R','G','B','4') /* 32 RGB-8-8-8-8 */
#define V4L2_PIX_FMT_GREY v4l2_fourcc('G','R','E','Y') /* 8 Greyscale */
+#define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P','A','L','8') /* 8 8-bit palette */
#define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y','V','U','9') /* 9 YVU 4:1:0 */
#define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y','V','1','2') /* 12 YVU 4:2:0 */
#define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y','U','Y','V') /* 16 YUV 4:2:2 */
@@ -287,6 +289,10 @@ struct v4l2_pix_format
#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4','2','2','P') /* 16 YVU422 planar */
#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4','1','1','P') /* 16 YVU411 planar */
#define V4L2_PIX_FMT_Y41P v4l2_fourcc('Y','4','1','P') /* 12 YUV 4:1:1 */
+#define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y','4','4','4') /* 16 xxxxyyyy uuuuvvvv */
+#define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y','U','V','O') /* 16 YUV-5-5-5 */
+#define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y','U','V','P') /* 16 YUV-5-6-5 */
+#define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y','U','V','4') /* 32 YUV-8-8-8-8 */
/* two planes -- one Y, one Cr + Cb interleaved */
#define V4L2_PIX_FMT_NV12 v4l2_fourcc('N','V','1','2') /* 12 Y/CbCr 4:2:0 */
@@ -298,7 +304,6 @@ struct v4l2_pix_format
#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y','Y','U','V') /* 16 YUV 4:2:2 */
#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H','I','2','4') /* 8 8-bit color */
#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H','M','1','2') /* 8 YUV 4:2:0 16x16 macroblocks */
-#define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R','4','4','4') /* 16 xxxxrrrr ggggbbbb */
/* see http://www.siliconimaging.com/RGB%20Bayer.htm */
#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B','A','8','1') /* 8 BGBG.. GRGR.. */
diff --git a/include/media/cx2341x.h b/include/media/cx2341x.h
index 38c12fed753..af8071d7620 100644
--- a/include/media/cx2341x.h
+++ b/include/media/cx2341x.h
@@ -91,7 +91,7 @@ int cx2341x_update(void *priv, cx2341x_mbox_func func,
int cx2341x_ctrl_query(struct cx2341x_mpeg_params *params,
struct v4l2_queryctrl *qctrl);
const char **cx2341x_ctrl_get_menu(u32 id);
-int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params,
+int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
struct v4l2_ext_controls *ctrls, unsigned int cmd);
void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p);
void cx2341x_log_status(struct cx2341x_mpeg_params *p, const char *prefix);
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index 9807a7c1583..7a785fa7721 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -140,6 +140,7 @@ extern IR_KEYTAB_TYPE ir_codes_budget_ci_old[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_asus_pc39[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_encore_enltv[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_tt_1500[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_fusionhdtv_mce[IR_KEYTAB_SIZE];
#endif
diff --git a/include/media/ivtv.h b/include/media/ivtv.h
deleted file mode 100644
index 412b48ea8ed..00000000000
--- a/include/media/ivtv.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- Public ivtv API header
- Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
- Copyright (C) 2004-2007 Hans Verkuil <hverkuil@xs4all.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _LINUX_IVTV_H
-#define _LINUX_IVTV_H
-
-/* ivtv knows several distinct output modes: MPEG streaming,
- YUV streaming, YUV updates through user DMA and the passthrough
- mode.
-
- In order to clearly tell the driver that we are in user DMA
- YUV mode you need to call IVTV_IOC_DMA_FRAME with y_source == NULL
- first (althrough if you don't then the first time
- DMA_FRAME is called the mode switch is done automatically).
-
- When you close the file handle the user DMA mode is exited again.
-
- While in one mode, you cannot use another mode (EBUSY is returned).
-
- All this means that if you want to change the YUV interlacing
- for the user DMA YUV mode you first need to do call IVTV_IOC_DMA_FRAME
- with y_source == NULL before you can set the correct format using
- VIDIOC_S_FMT.
-
- Eventually all this should be replaced with a proper V4L2 API,
- but for now we have to do it this way. */
-
-struct ivtv_dma_frame {
- enum v4l2_buf_type type; /* V4L2_BUF_TYPE_VIDEO_OUTPUT */
- __u32 pixelformat; /* 0 == same as destination */
- void __user *y_source; /* if NULL and type == V4L2_BUF_TYPE_VIDEO_OUTPUT,
- then just switch to user DMA YUV output mode */
- void __user *uv_source; /* Unused for RGB pixelformats */
- struct v4l2_rect src;
- struct v4l2_rect dst;
- __u32 src_width;
- __u32 src_height;
-};
-
-#define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame)
-
-/* These are the VBI types as they appear in the embedded VBI private packets. */
-#define IVTV_SLICED_TYPE_TELETEXT_B (1)
-#define IVTV_SLICED_TYPE_CAPTION_525 (4)
-#define IVTV_SLICED_TYPE_WSS_625 (5)
-#define IVTV_SLICED_TYPE_VPS (7)
-
-#endif /* _LINUX_IVTV_H */
diff --git a/include/media/saa7146.h b/include/media/saa7146.h
index 67703249b24..cd3ff2c29d5 100644
--- a/include/media/saa7146.h
+++ b/include/media/saa7146.h
@@ -146,7 +146,6 @@ struct saa7146_dev
/* from saa7146_i2c.c */
int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate);
-int saa7146_i2c_transfer(struct saa7146_dev *saa, const struct i2c_msg *msgs, int num, int retries);
/* from saa7146_core.c */
extern struct list_head saa7146_devices;
diff --git a/include/media/saa7146_vv.h b/include/media/saa7146_vv.h
index cce20ed5cf6..e49f7e15606 100644
--- a/include/media/saa7146_vv.h
+++ b/include/media/saa7146_vv.h
@@ -4,7 +4,7 @@
#include <linux/videodev.h>
#include <media/v4l2-common.h>
#include <media/saa7146.h>
-#include <media/video-buf.h>
+#include <media/videobuf-dma-sg.h>
#define MAX_SAA7146_CAPTURE_BUFFERS 32 /* arbitrary */
#define BUFFER_TIMEOUT (HZ/2) /* 0.5 seconds */
diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h
index e5ad3fcfe98..b201371416a 100644
--- a/include/media/tuner-types.h
+++ b/include/media/tuner-types.h
@@ -79,6 +79,10 @@ struct tuner_params {
/* Select 18% (or according to datasheet 0%) L standard PLL gating,
vs the driver default of 36%. */
unsigned int default_pll_gating_18:1;
+ /* IF to use in radio mode. Tuners with a separate radio IF filter
+ seem to use 10.7, while those without use 33.3 for PAL/SECAM tuners
+ and 41.3 for NTSC tuners. 0 = 10.7, 1 = 33.3, 2 = 41.3 */
+ unsigned int radio_if:2;
/* Default tda9887 TOP value in dB for the low band. Default is 0.
Range: -16:+15 */
signed int default_top_low:5;
diff --git a/include/media/tuner.h b/include/media/tuner.h
index 160381c72e4..c03dceb9260 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -146,6 +146,7 @@ extern int tuner_debug;
#define TDA9887_AUTOMUTE (1<<18)
#define TDA9887_GATING_18 (1<<19)
#define TDA9887_GAIN_NORMAL (1<<20)
+#define TDA9887_RIF_41_3 (1<<21) /* radio IF1 41.3 vs 33.3 */
#ifdef __KERNEL__
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 09d16c4f00f..8ae42c41dd0 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -65,6 +65,9 @@ enum {
V4L2_IDENT_CX23415 = 415,
V4L2_IDENT_CX23416 = 416,
+ /* module vp27smpx: just ident 2700 */
+ V4L2_IDENT_VP27SMPX = 2700,
+
/* module wm8739: just ident 8739 */
V4L2_IDENT_WM8739 = 8739,
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index 17f8f3a2f0a..e75d5e6c4ce 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -23,8 +23,6 @@
#include <linux/videodev2.h>
#endif
-#include <linux/fs.h>
-
#define VIDEO_MAJOR 81
/* Minor device allocation */
#define MINOR_VFL_TYPE_GRABBER_MIN 0
@@ -88,8 +86,11 @@ struct video_device
/* device ops */
const struct file_operations *fops;
+ /* sysfs */
+ struct device class_dev; /* v4l device */
+ struct device *dev; /* device parent */
+
/* device info */
- struct device *dev;
char name[32];
int type; /* v4l1 */
int type2; /* v4l2 */
@@ -334,7 +335,6 @@ void *priv;
/* for videodev.c intenal usage -- please don't touch */
int users; /* video_exclusive_{open|close} ... */
struct mutex lock; /* ... helper function uses these */
- struct class_device class_dev; /* sysfs */
};
/* Class-dev to video-device */
@@ -362,18 +362,18 @@ extern int video_usercopy(struct inode *inode, struct file *file,
static inline int __must_check
video_device_create_file(struct video_device *vfd,
- struct class_device_attribute *attr)
+ struct device_attribute *attr)
{
- int ret = class_device_create_file(&vfd->class_dev, attr);
+ int ret = device_create_file(&vfd->class_dev, attr);
if (ret < 0)
printk(KERN_WARNING "%s error: %d\n", __FUNCTION__, ret);
return ret;
}
static inline void
video_device_remove_file(struct video_device *vfd,
- struct class_device_attribute *attr)
+ struct device_attribute *attr)
{
- class_device_remove_file(&vfd->class_dev, attr);
+ device_remove_file(&vfd->class_dev, attr);
}
#endif /* CONFIG_VIDEO_V4L1_COMPAT */
diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h
new file mode 100644
index 00000000000..066ebfc4f98
--- /dev/null
+++ b/include/media/v4l2-int-device.h
@@ -0,0 +1,278 @@
+/*
+ * include/media/v4l2-int-device.h
+ *
+ * V4L2 internal ioctl interface.
+ *
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * Contact: Sakari Ailus <sakari.ailus@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef V4L2_INT_DEVICE_H
+#define V4L2_INT_DEVICE_H
+
+#include <linux/module.h>
+#include <media/v4l2-common.h>
+
+#define V4L2NAMESIZE 32
+
+/*
+ *
+ * The internal V4L2 device interface core.
+ *
+ */
+
+enum v4l2_int_type {
+ v4l2_int_type_master = 1,
+ v4l2_int_type_slave
+};
+
+struct v4l2_int_device;
+
+struct v4l2_int_master {
+ int (*attach)(struct v4l2_int_device *master,
+ struct v4l2_int_device *slave);
+ void (*detach)(struct v4l2_int_device *master);
+};
+
+typedef int (v4l2_int_ioctl_func)(struct v4l2_int_device *);
+typedef int (v4l2_int_ioctl_func_0)(struct v4l2_int_device *);
+typedef int (v4l2_int_ioctl_func_1)(struct v4l2_int_device *, void *);
+
+struct v4l2_int_ioctl_desc {
+ int num;
+ v4l2_int_ioctl_func *func;
+};
+
+struct v4l2_int_slave {
+ /* Don't touch master. */
+ struct v4l2_int_device *master;
+
+ char attach_to[V4L2NAMESIZE];
+
+ int num_ioctls;
+ struct v4l2_int_ioctl_desc *ioctls;
+};
+
+struct v4l2_int_device {
+ /* Don't touch head. */
+ struct list_head head;
+
+ struct module *module;
+
+ char name[V4L2NAMESIZE];
+
+ enum v4l2_int_type type;
+ union {
+ struct v4l2_int_master *master;
+ struct v4l2_int_slave *slave;
+ } u;
+
+ void *priv;
+};
+
+int v4l2_int_device_register(struct v4l2_int_device *d);
+void v4l2_int_device_unregister(struct v4l2_int_device *d);
+
+int v4l2_int_ioctl_0(struct v4l2_int_device *d, int cmd);
+int v4l2_int_ioctl_1(struct v4l2_int_device *d, int cmd, void *arg);
+
+/*
+ *
+ * Types and definitions for IOCTL commands.
+ *
+ */
+
+/* Slave interface type. */
+enum v4l2_if_type {
+ /*
+ * Parallel 8-, 10- or 12-bit interface, used by for example
+ * on certain image sensors.
+ */
+ V4L2_IF_TYPE_BT656,
+};
+
+enum v4l2_if_type_bt656_mode {
+ /*
+ * Modes without Bt synchronisation codes. Separate
+ * synchronisation signal lines are used.
+ */
+ V4L2_IF_TYPE_BT656_MODE_NOBT_8BIT,
+ V4L2_IF_TYPE_BT656_MODE_NOBT_10BIT,
+ V4L2_IF_TYPE_BT656_MODE_NOBT_12BIT,
+ /*
+ * Use Bt synchronisation codes. The vertical and horizontal
+ * synchronisation is done based on synchronisation codes.
+ */
+ V4L2_IF_TYPE_BT656_MODE_BT_8BIT,
+ V4L2_IF_TYPE_BT656_MODE_BT_10BIT,
+};
+
+struct v4l2_if_type_bt656 {
+ /*
+ * 0: Frame begins when vsync is high.
+ * 1: Frame begins when vsync changes from low to high.
+ */
+ unsigned frame_start_on_rising_vs:1;
+ /* Use Bt synchronisation codes for sync correction. */
+ unsigned bt_sync_correct:1;
+ /* Swap every two adjacent image data elements. */
+ unsigned swap:1;
+ /* Inverted latch clock polarity from slave. */
+ unsigned latch_clk_inv:1;
+ /* Hs polarity. 0 is active high, 1 active low. */
+ unsigned nobt_hs_inv:1;
+ /* Vs polarity. 0 is active high, 1 active low. */
+ unsigned nobt_vs_inv:1;
+ enum v4l2_if_type_bt656_mode mode;
+ /* Minimum accepted bus clock for slave (in Hz). */
+ u32 clock_min;
+ /* Maximum accepted bus clock for slave. */
+ u32 clock_max;
+ /*
+ * Current wish of the slave. May only change in response to
+ * ioctls that affect image capture.
+ */
+ u32 clock_curr;
+};
+
+struct v4l2_ifparm {
+ enum v4l2_if_type if_type;
+ union {
+ struct v4l2_if_type_bt656 bt656;
+ } u;
+};
+
+/* IOCTL command numbers. */
+enum v4l2_int_ioctl_num {
+ /*
+ *
+ * "Proper" V4L ioctls, as in struct video_device.
+ *
+ */
+ vidioc_int_enum_fmt_cap_num = 1,
+ vidioc_int_g_fmt_cap_num,
+ vidioc_int_s_fmt_cap_num,
+ vidioc_int_try_fmt_cap_num,
+ vidioc_int_queryctrl_num,
+ vidioc_int_g_ctrl_num,
+ vidioc_int_s_ctrl_num,
+ vidioc_int_g_parm_num,
+ vidioc_int_s_parm_num,
+
+ /*
+ *
+ * Strictly internal ioctls.
+ *
+ */
+ /* Initialise the device when slave attaches to the master. */
+ vidioc_int_dev_init_num = 1000,
+ /* Delinitialise the device at slave detach. */
+ vidioc_int_dev_exit_num,
+ /* Set device power state: 0 is off, non-zero is on. */
+ vidioc_int_s_power_num,
+ /* Get slave interface parameters. */
+ vidioc_int_g_ifparm_num,
+ /* Does the slave need to be reset after VIDIOC_DQBUF? */
+ vidioc_int_g_needs_reset_num,
+
+ /*
+ *
+ * VIDIOC_INT_* ioctls.
+ *
+ */
+ /* VIDIOC_INT_RESET */
+ vidioc_int_reset_num,
+ /* VIDIOC_INT_INIT */
+ vidioc_int_init_num,
+ /* VIDIOC_INT_G_CHIP_IDENT */
+ vidioc_int_g_chip_ident_num,
+
+ /*
+ *
+ * Start of private ioctls.
+ *
+ */
+ vidioc_int_priv_start_num = 2000,
+};
+
+/*
+ *
+ * IOCTL wrapper functions for better type checking.
+ *
+ */
+
+#define V4L2_INT_WRAPPER_0(name) \
+ static inline int vidioc_int_##name(struct v4l2_int_device *d) \
+ { \
+ return v4l2_int_ioctl_0(d, vidioc_int_##name##_num); \
+ } \
+ \
+ static inline struct v4l2_int_ioctl_desc \
+ vidioc_int_##name##_cb(int (*func) \
+ (struct v4l2_int_device *)) \
+ { \
+ struct v4l2_int_ioctl_desc desc; \
+ \
+ desc.num = vidioc_int_##name##_num; \
+ desc.func = (v4l2_int_ioctl_func *)func; \
+ \
+ return desc; \
+ }
+
+#define V4L2_INT_WRAPPER_1(name, arg_type, asterisk) \
+ static inline int vidioc_int_##name(struct v4l2_int_device *d, \
+ arg_type asterisk arg) \
+ { \
+ return v4l2_int_ioctl_1(d, vidioc_int_##name##_num, \
+ (void *)(unsigned long)arg); \
+ } \
+ \
+ static inline struct v4l2_int_ioctl_desc \
+ vidioc_int_##name##_cb(int (*func) \
+ (struct v4l2_int_device *, \
+ arg_type asterisk)) \
+ { \
+ struct v4l2_int_ioctl_desc desc; \
+ \
+ desc.num = vidioc_int_##name##_num; \
+ desc.func = (v4l2_int_ioctl_func *)func; \
+ \
+ return desc; \
+ }
+
+V4L2_INT_WRAPPER_1(enum_fmt_cap, struct v4l2_fmtdesc, *);
+V4L2_INT_WRAPPER_1(g_fmt_cap, struct v4l2_format, *);
+V4L2_INT_WRAPPER_1(s_fmt_cap, struct v4l2_format, *);
+V4L2_INT_WRAPPER_1(try_fmt_cap, struct v4l2_format, *);
+V4L2_INT_WRAPPER_1(queryctrl, struct v4l2_queryctrl, *);
+V4L2_INT_WRAPPER_1(g_ctrl, struct v4l2_control, *);
+V4L2_INT_WRAPPER_1(s_ctrl, struct v4l2_control, *);
+V4L2_INT_WRAPPER_1(g_parm, struct v4l2_streamparm, *);
+V4L2_INT_WRAPPER_1(s_parm, struct v4l2_streamparm, *);
+
+V4L2_INT_WRAPPER_0(dev_init);
+V4L2_INT_WRAPPER_0(dev_exit);
+V4L2_INT_WRAPPER_1(s_power, int, );
+V4L2_INT_WRAPPER_1(g_ifparm, struct v4l2_ifparm, *);
+V4L2_INT_WRAPPER_1(g_needs_reset, void, *);
+
+V4L2_INT_WRAPPER_0(reset);
+V4L2_INT_WRAPPER_0(init);
+V4L2_INT_WRAPPER_1(g_chip_ident, int, *);
+
+#endif
diff --git a/include/media/video-buf.h b/include/media/video-buf.h
deleted file mode 100644
index d6f079476db..00000000000
--- a/include/media/video-buf.h
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- *
- * generic helper functions for video4linux capture buffers, to handle
- * memory management and PCI DMA.
- * Right now, bttv, saa7134, saa7146 and cx88 use it.
- *
- * The functions expect the hardware being able to scatter gatter
- * (i.e. the buffers are not linear in physical memory, but fragmented
- * into PAGE_SIZE chunks). They also assume the driver does not need
- * to touch the video data.
- *
- * device specific map/unmap/sync stuff now are mapped as file operations
- * to allow its usage by USB and virtual devices.
- *
- * (c) 2001,02 Gerd Knorr <kraxel@bytesex.org>
- * (c) 2006 Mauro Carvalho Chehab, <mchehab@infradead.org>
- * (c) 2006 Ted Walther and John Sokol
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/videodev2.h>
-#include <linux/poll.h>
-
-#define UNSET (-1U)
-
-/* --------------------------------------------------------------------- */
-
-/*
- * Return a scatterlist for some page-aligned vmalloc()'ed memory
- * block (NULL on errors). Memory for the scatterlist is allocated
- * using kmalloc. The caller must free the memory.
- */
-struct scatterlist* videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages);
-
-/*
- * Return a scatterlist for a an array of userpages (NULL on errors).
- * Memory for the scatterlist is allocated using kmalloc. The caller
- * must free the memory.
- */
-struct scatterlist* videobuf_pages_to_sg(struct page **pages, int nr_pages,
- int offset);
-
-struct videobuf_buffer;
-struct videobuf_queue;
-
-/* --------------------------------------------------------------------- */
-
-/*
- * A small set of helper functions to manage buffers (both userland
- * and kernel) for DMA.
- *
- * videobuf_dma_init_*()
- * creates a buffer. The userland version takes a userspace
- * pointer + length. The kernel version just wants the size and
- * does memory allocation too using vmalloc_32().
- *
- * videobuf_dma_*()
- * see Documentation/DMA-mapping.txt, these functions to
- * basically the same. The map function does also build a
- * scatterlist for the buffer (and unmap frees it ...)
- *
- * videobuf_dma_free()
- * no comment ...
- *
- */
-
-struct videobuf_dmabuf {
- u32 magic;
-
- /* for userland buffer */
- int offset;
- struct page **pages;
-
- /* for kernel buffers */
- void *vmalloc;
-
- /* Stores the userspace pointer to vmalloc area */
- void *varea;
-
- /* for overlay buffers (pci-pci dma) */
- dma_addr_t bus_addr;
-
- /* common */
- struct scatterlist *sglist;
- int sglen;
- int nr_pages;
- int direction;
-};
-
-void videobuf_dma_init(struct videobuf_dmabuf *dma);
-int videobuf_dma_init_user(struct videobuf_dmabuf *dma, int direction,
- unsigned long data, unsigned long size);
-int videobuf_dma_init_kernel(struct videobuf_dmabuf *dma, int direction,
- int nr_pages);
-int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction,
- dma_addr_t addr, int nr_pages);
-int videobuf_dma_free(struct videobuf_dmabuf *dma);
-
-int videobuf_dma_map(struct videobuf_queue* q,struct videobuf_dmabuf *dma);
-int videobuf_dma_sync(struct videobuf_queue* q,struct videobuf_dmabuf *dma);
-int videobuf_dma_unmap(struct videobuf_queue* q,struct videobuf_dmabuf *dma);
-
- /*FIXME: these variants are used only on *-alsa code, where videobuf is
- * used without queue
- */
-int videobuf_pci_dma_map(struct pci_dev *pci,struct videobuf_dmabuf *dma);
-int videobuf_pci_dma_unmap(struct pci_dev *pci,struct videobuf_dmabuf *dma);
-
-/* --------------------------------------------------------------------- */
-
-/*
- * A small set of helper functions to manage video4linux buffers.
- *
- * struct videobuf_buffer holds the data structures used by the helper
- * functions, additionally some commonly used fields for v4l buffers
- * (width, height, lists, waitqueue) are in there. That struct should
- * be used as first element in the drivers buffer struct.
- *
- * about the mmap helpers (videobuf_mmap_*):
- *
- * The mmaper function allows to map any subset of contingous buffers.
- * This includes one mmap() call for all buffers (which the original
- * video4linux API uses) as well as one mmap() for every single buffer
- * (which v4l2 uses).
- *
- * If there is a valid mapping for a buffer, buffer->baddr/bsize holds
- * userspace address + size which can be feeded into the
- * videobuf_dma_init_user function listed above.
- *
- */
-
-struct videobuf_mapping {
- unsigned int count;
- unsigned long start;
- unsigned long end;
- struct videobuf_queue *q;
-};
-
-enum videobuf_state {
- STATE_NEEDS_INIT = 0,
- STATE_PREPARED = 1,
- STATE_QUEUED = 2,
- STATE_ACTIVE = 3,
- STATE_DONE = 4,
- STATE_ERROR = 5,
- STATE_IDLE = 6,
-};
-
-struct videobuf_buffer {
- unsigned int i;
- u32 magic;
-
- /* info about the buffer */
- unsigned int width;
- unsigned int height;
- unsigned int bytesperline; /* use only if != 0 */
- unsigned long size;
- unsigned int input;
- enum v4l2_field field;
- enum videobuf_state state;
- struct videobuf_dmabuf dma;
- struct list_head stream; /* QBUF/DQBUF list */
-
- /* for mmap'ed buffers */
- enum v4l2_memory memory;
- size_t boff; /* buffer offset (mmap + overlay) */
- size_t bsize; /* buffer size */
- unsigned long baddr; /* buffer addr (userland ptr!) */
- struct videobuf_mapping *map;
-
- /* touched by irq handler */
- struct list_head queue;
- wait_queue_head_t done;
- unsigned int field_count;
- struct timeval ts;
-};
-
-typedef int (vb_map_sg_t)(void *dev,struct scatterlist *sglist,int nr_pages,
- int direction);
-
-
-struct videobuf_queue_ops {
- int (*buf_setup)(struct videobuf_queue *q,
- unsigned int *count, unsigned int *size);
- int (*buf_prepare)(struct videobuf_queue *q,
- struct videobuf_buffer *vb,
- enum v4l2_field field);
- void (*buf_queue)(struct videobuf_queue *q,
- struct videobuf_buffer *vb);
- void (*buf_release)(struct videobuf_queue *q,
- struct videobuf_buffer *vb);
-
- /* Helper operations - device dependent.
- * If null, videobuf_init defaults all to PCI handling
- */
-
- vb_map_sg_t *vb_map_sg;
- vb_map_sg_t *vb_dma_sync_sg;
- vb_map_sg_t *vb_unmap_sg;
-};
-
-struct videobuf_queue {
- struct mutex lock;
- spinlock_t *irqlock;
- void *dev; /* on pci, points to struct pci_dev */
-
- enum v4l2_buf_type type;
- unsigned int inputs; /* for V4L2_BUF_FLAG_INPUT */
- unsigned int msize;
- enum v4l2_field field;
- enum v4l2_field last; /* for field=V4L2_FIELD_ALTERNATE */
- struct videobuf_buffer *bufs[VIDEO_MAX_FRAME];
- struct videobuf_queue_ops *ops;
-
- /* capture via mmap() + ioctl(QBUF/DQBUF) */
- unsigned int streaming;
- struct list_head stream;
-
- /* capture via read() */
- unsigned int reading;
- unsigned int read_off;
- struct videobuf_buffer *read_buf;
-
- /* driver private data */
- void *priv_data;
-};
-
-void* videobuf_alloc(unsigned int size);
-int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr);
-int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,
- struct v4l2_framebuffer *fbuf);
-
-/* Maps fops to PCI stuff */
-void videobuf_queue_pci(struct videobuf_queue* q);
-
-void videobuf_queue_init(struct videobuf_queue *q,
- struct videobuf_queue_ops *ops,
- void *dev,
- spinlock_t *irqlock,
- enum v4l2_buf_type type,
- enum v4l2_field field,
- unsigned int msize,
- void *priv);
-int videobuf_queue_is_busy(struct videobuf_queue *q);
-void videobuf_queue_cancel(struct videobuf_queue *q);
-
-enum v4l2_field videobuf_next_field(struct videobuf_queue *q);
-void videobuf_status(struct v4l2_buffer *b, struct videobuf_buffer *vb,
- enum v4l2_buf_type type);
-int videobuf_reqbufs(struct videobuf_queue *q,
- struct v4l2_requestbuffers *req);
-int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b);
-int videobuf_qbuf(struct videobuf_queue *q,
- struct v4l2_buffer *b);
-int videobuf_dqbuf(struct videobuf_queue *q,
- struct v4l2_buffer *b, int nonblocking);
-int videobuf_streamon(struct videobuf_queue *q);
-int videobuf_streamoff(struct videobuf_queue *q);
-
-int videobuf_read_start(struct videobuf_queue *q);
-void videobuf_read_stop(struct videobuf_queue *q);
-ssize_t videobuf_read_stream(struct videobuf_queue *q,
- char __user *data, size_t count, loff_t *ppos,
- int vbihack, int nonblocking);
-ssize_t videobuf_read_one(struct videobuf_queue *q,
- char __user *data, size_t count, loff_t *ppos,
- int nonblocking);
-unsigned int videobuf_poll_stream(struct file *file,
- struct videobuf_queue *q,
- poll_table *wait);
-
-int videobuf_mmap_setup(struct videobuf_queue *q,
- unsigned int bcount, unsigned int bsize,
- enum v4l2_memory memory);
-int videobuf_mmap_free(struct videobuf_queue *q);
-int videobuf_mmap_mapper(struct videobuf_queue *q,
- struct vm_area_struct *vma);
-
-/* --------------------------------------------------------------------- */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h
new file mode 100644
index 00000000000..9fa09fb800a
--- /dev/null
+++ b/include/media/videobuf-core.h
@@ -0,0 +1,236 @@
+/*
+ * generic helper functions for handling video4linux capture buffers
+ *
+ * (c) 2007 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ *
+ * Highly based on video-buf written originally by:
+ * (c) 2001,02 Gerd Knorr <kraxel@bytesex.org>
+ * (c) 2006 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ * (c) 2006 Ted Walther and John Sokol
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2
+ */
+
+#include <linux/poll.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+#include <linux/videodev.h>
+#endif
+#include <linux/videodev2.h>
+
+#define UNSET (-1U)
+
+
+struct videobuf_buffer;
+struct videobuf_queue;
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * A small set of helper functions to manage video4linux buffers.
+ *
+ * struct videobuf_buffer holds the data structures used by the helper
+ * functions, additionally some commonly used fields for v4l buffers
+ * (width, height, lists, waitqueue) are in there. That struct should
+ * be used as first element in the drivers buffer struct.
+ *
+ * about the mmap helpers (videobuf_mmap_*):
+ *
+ * The mmaper function allows to map any subset of contingous buffers.
+ * This includes one mmap() call for all buffers (which the original
+ * video4linux API uses) as well as one mmap() for every single buffer
+ * (which v4l2 uses).
+ *
+ * If there is a valid mapping for a buffer, buffer->baddr/bsize holds
+ * userspace address + size which can be feeded into the
+ * videobuf_dma_init_user function listed above.
+ *
+ */
+
+struct videobuf_mapping {
+ unsigned int count;
+ unsigned long start;
+ unsigned long end;
+ struct videobuf_queue *q;
+};
+
+enum videobuf_state {
+ STATE_NEEDS_INIT = 0,
+ STATE_PREPARED = 1,
+ STATE_QUEUED = 2,
+ STATE_ACTIVE = 3,
+ STATE_DONE = 4,
+ STATE_ERROR = 5,
+ STATE_IDLE = 6,
+};
+
+struct videobuf_buffer {
+ unsigned int i;
+ u32 magic;
+
+ /* info about the buffer */
+ unsigned int width;
+ unsigned int height;
+ unsigned int bytesperline; /* use only if != 0 */
+ unsigned long size;
+ unsigned int input;
+ enum v4l2_field field;
+ enum videobuf_state state;
+ struct list_head stream; /* QBUF/DQBUF list */
+
+ /* touched by irq handler */
+ struct list_head queue;
+ wait_queue_head_t done;
+ unsigned int field_count;
+ struct timeval ts;
+
+ /* Memory type */
+ enum v4l2_memory memory;
+
+ /* buffer size */
+ size_t bsize;
+
+ /* buffer offset (mmap + overlay) */
+ size_t boff;
+
+ /* buffer addr (userland ptr!) */
+ unsigned long baddr;
+
+ /* for mmap'ed buffers */
+ struct videobuf_mapping *map;
+
+ /* Private pointer to allow specific methods to store their data */
+ int privsize;
+ void *priv;
+};
+
+struct videobuf_queue_ops {
+ int (*buf_setup)(struct videobuf_queue *q,
+ unsigned int *count, unsigned int *size);
+ int (*buf_prepare)(struct videobuf_queue *q,
+ struct videobuf_buffer *vb,
+ enum v4l2_field field);
+ void (*buf_queue)(struct videobuf_queue *q,
+ struct videobuf_buffer *vb);
+ void (*buf_release)(struct videobuf_queue *q,
+ struct videobuf_buffer *vb);
+};
+
+#define MAGIC_QTYPE_OPS 0x12261003
+
+/* Helper operations - device type dependent */
+struct videobuf_qtype_ops {
+ u32 magic;
+
+ void* (*alloc) (size_t size);
+ int (*iolock) (struct videobuf_queue* q,
+ struct videobuf_buffer *vb,
+ struct v4l2_framebuffer *fbuf);
+ int (*mmap) (struct videobuf_queue *q,
+ unsigned int *count,
+ unsigned int *size,
+ enum v4l2_memory memory);
+ int (*sync) (struct videobuf_queue* q,
+ struct videobuf_buffer *buf);
+ int (*copy_to_user) (struct videobuf_queue *q,
+ char __user *data,
+ size_t count,
+ int nonblocking);
+ int (*copy_stream) (struct videobuf_queue *q,
+ char __user *data,
+ size_t count,
+ size_t pos,
+ int vbihack,
+ int nonblocking);
+ int (*mmap_free) (struct videobuf_queue *q);
+ int (*mmap_mapper) (struct videobuf_queue *q,
+ struct vm_area_struct *vma);
+};
+
+struct videobuf_queue {
+ struct mutex lock;
+ spinlock_t *irqlock;
+ void *dev; /* on pci, points to struct pci_dev */
+
+ enum v4l2_buf_type type;
+ unsigned int inputs; /* for V4L2_BUF_FLAG_INPUT */
+ unsigned int msize;
+ enum v4l2_field field;
+ enum v4l2_field last; /* for field=V4L2_FIELD_ALTERNATE */
+ struct videobuf_buffer *bufs[VIDEO_MAX_FRAME];
+ struct videobuf_queue_ops *ops;
+ struct videobuf_qtype_ops *int_ops;
+
+ /* capture via mmap() + ioctl(QBUF/DQBUF) */
+ unsigned int streaming;
+ struct list_head stream;
+
+ /* capture via read() */
+ unsigned int reading;
+ unsigned int read_off;
+ struct videobuf_buffer *read_buf;
+
+ /* driver private data */
+ void *priv_data;
+};
+
+int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr);
+int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,
+ struct v4l2_framebuffer *fbuf);
+
+void *videobuf_alloc(struct videobuf_queue* q);
+
+void videobuf_queue_core_init(struct videobuf_queue *q,
+ struct videobuf_queue_ops *ops,
+ void *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv,
+ struct videobuf_qtype_ops *int_ops);
+int videobuf_queue_is_busy(struct videobuf_queue *q);
+void videobuf_queue_cancel(struct videobuf_queue *q);
+
+enum v4l2_field videobuf_next_field(struct videobuf_queue *q);
+int videobuf_reqbufs(struct videobuf_queue *q,
+ struct v4l2_requestbuffers *req);
+int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b);
+int videobuf_qbuf(struct videobuf_queue *q,
+ struct v4l2_buffer *b);
+int videobuf_dqbuf(struct videobuf_queue *q,
+ struct v4l2_buffer *b, int nonblocking);
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+int videobuf_cgmbuf(struct videobuf_queue *q,
+ struct video_mbuf *mbuf, int count);
+#endif
+int videobuf_streamon(struct videobuf_queue *q);
+int videobuf_streamoff(struct videobuf_queue *q);
+
+int videobuf_read_start(struct videobuf_queue *q);
+void videobuf_read_stop(struct videobuf_queue *q);
+ssize_t videobuf_read_stream(struct videobuf_queue *q,
+ char __user *data, size_t count, loff_t *ppos,
+ int vbihack, int nonblocking);
+ssize_t videobuf_read_one(struct videobuf_queue *q,
+ char __user *data, size_t count, loff_t *ppos,
+ int nonblocking);
+unsigned int videobuf_poll_stream(struct file *file,
+ struct videobuf_queue *q,
+ poll_table *wait);
+
+int videobuf_mmap_setup(struct videobuf_queue *q,
+ unsigned int bcount, unsigned int bsize,
+ enum v4l2_memory memory);
+int videobuf_mmap_free(struct videobuf_queue *q);
+int videobuf_mmap_mapper(struct videobuf_queue *q,
+ struct vm_area_struct *vma);
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h
new file mode 100644
index 00000000000..38105031db2
--- /dev/null
+++ b/include/media/videobuf-dma-sg.h
@@ -0,0 +1,122 @@
+/*
+ * helper functions for PCI DMA video4linux capture buffers
+ *
+ * The functions expect the hardware being able to scatter gatter
+ * (i.e. the buffers are not linear in physical memory, but fragmented
+ * into PAGE_SIZE chunks). They also assume the driver does not need
+ * to touch the video data.
+ *
+ * (c) 2007 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ *
+ * Highly based on video-buf written originally by:
+ * (c) 2001,02 Gerd Knorr <kraxel@bytesex.org>
+ * (c) 2006 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ * (c) 2006 Ted Walther and John Sokol
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2
+ */
+
+#include <media/videobuf-core.h>
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * Return a scatterlist for some page-aligned vmalloc()'ed memory
+ * block (NULL on errors). Memory for the scatterlist is allocated
+ * using kmalloc. The caller must free the memory.
+ */
+struct scatterlist* videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages);
+
+/*
+ * Return a scatterlist for a an array of userpages (NULL on errors).
+ * Memory for the scatterlist is allocated using kmalloc. The caller
+ * must free the memory.
+ */
+struct scatterlist* videobuf_pages_to_sg(struct page **pages, int nr_pages,
+ int offset);
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * A small set of helper functions to manage buffers (both userland
+ * and kernel) for DMA.
+ *
+ * videobuf_dma_init_*()
+ * creates a buffer. The userland version takes a userspace
+ * pointer + length. The kernel version just wants the size and
+ * does memory allocation too using vmalloc_32().
+ *
+ * videobuf_dma_*()
+ * see Documentation/DMA-mapping.txt, these functions to
+ * basically the same. The map function does also build a
+ * scatterlist for the buffer (and unmap frees it ...)
+ *
+ * videobuf_dma_free()
+ * no comment ...
+ *
+ */
+
+struct videobuf_dmabuf {
+ u32 magic;
+
+ /* for userland buffer */
+ int offset;
+ struct page **pages;
+
+ /* for kernel buffers */
+ void *vmalloc;
+
+ /* Stores the userspace pointer to vmalloc area */
+ void *varea;
+
+ /* for overlay buffers (pci-pci dma) */
+ dma_addr_t bus_addr;
+
+ /* common */
+ struct scatterlist *sglist;
+ int sglen;
+ int nr_pages;
+ int direction;
+};
+
+struct videbuf_pci_sg_memory
+{
+ u32 magic;
+
+ /* for mmap'ed buffers */
+ struct videobuf_dmabuf dma;
+};
+
+void videobuf_dma_init(struct videobuf_dmabuf *dma);
+int videobuf_dma_init_user(struct videobuf_dmabuf *dma, int direction,
+ unsigned long data, unsigned long size);
+int videobuf_dma_init_kernel(struct videobuf_dmabuf *dma, int direction,
+ int nr_pages);
+int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction,
+ dma_addr_t addr, int nr_pages);
+int videobuf_dma_free(struct videobuf_dmabuf *dma);
+
+int videobuf_dma_map(struct videobuf_queue* q,struct videobuf_dmabuf *dma);
+int videobuf_dma_sync(struct videobuf_queue* q,struct videobuf_dmabuf *dma);
+int videobuf_dma_unmap(struct videobuf_queue* q,struct videobuf_dmabuf *dma);
+struct videobuf_dmabuf *videobuf_to_dma (struct videobuf_buffer *buf);
+
+void *videobuf_pci_alloc (size_t size);
+
+void videobuf_queue_pci_init(struct videobuf_queue* q,
+ struct videobuf_queue_ops *ops,
+ void *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv);
+
+ /*FIXME: these variants are used only on *-alsa code, where videobuf is
+ * used without queue
+ */
+int videobuf_pci_dma_map(struct pci_dev *pci,struct videobuf_dmabuf *dma);
+int videobuf_pci_dma_unmap(struct pci_dev *pci,struct videobuf_dmabuf *dma);
+
diff --git a/include/media/video-buf-dvb.h b/include/media/videobuf-dvb.h
index 8233cafdeef..8233cafdeef 100644
--- a/include/media/video-buf-dvb.h
+++ b/include/media/videobuf-dvb.h
diff --git a/include/media/videobuf-vmalloc.h b/include/media/videobuf-vmalloc.h
new file mode 100644
index 00000000000..26a8958d23d
--- /dev/null
+++ b/include/media/videobuf-vmalloc.h
@@ -0,0 +1,41 @@
+/*
+ * helper functions for vmalloc capture buffers
+ *
+ * The functions expect the hardware being able to scatter gatter
+ * (i.e. the buffers are not linear in physical memory, but fragmented
+ * into PAGE_SIZE chunks). They also assume the driver does not need
+ * to touch the video data.
+ *
+ * (c) 2007 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2
+ */
+
+#include <media/videobuf-core.h>
+
+/* --------------------------------------------------------------------- */
+
+struct videbuf_vmalloc_memory
+{
+ u32 magic;
+
+ void *vmalloc;
+
+ /* remap_vmalloc_range seems to need to run after mmap() on some cases */
+ struct vm_area_struct *vma;
+};
+
+void videobuf_queue_vmalloc_init(struct videobuf_queue* q,
+ struct videobuf_queue_ops *ops,
+ void *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv);
+
+void *videobuf_to_vmalloc (struct videobuf_buffer *buf);
+
+void videobuf_vmalloc_free (struct videobuf_buffer *buf);
diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
index f7844f6aa48..66315862715 100755
--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -12,6 +12,7 @@
# sh64 port by Paul Mundt
# Random bits by Matt Mackall <mpm@selenic.com>
# M68k port by Geert Uytterhoeven and Andreas Schwab
+# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
#
# Usage:
# objdump -d vmlinux | stackcheck.pl [arch]
@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
if ($arch eq 'arm') {
#c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
+ } elsif ($arch eq 'avr32') {
+ #8000008a: 20 1d sub sp,4
+ #80000ca8: fa cd 05 b0 sub sp,sp,1456
+ $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
} elsif ($arch =~ /^i[3456]86$/) {
#c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp
$re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o;
diff --git a/scripts/checksyscalls.sh b/scripts/checksyscalls.sh
index 0dcc01ce45a..366f8c7f62b 100755
--- a/scripts/checksyscalls.sh
+++ b/scripts/checksyscalls.sh
@@ -119,5 +119,5 @@ sed -n -e '/^\#define/ { s/[^_]*__NR_\([^[:space:]]*\).*/\
\#endif/p }' $1
}
-(ignore_list && syscall_list ${srctree}/include/asm-i386/unistd.h) | \
+(ignore_list && syscall_list ${srctree}/include/asm-x86/unistd_32.h) | \
$* -E -x c - > /dev/null
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 8a09021d8c5..1e5d4d69319 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -484,6 +484,22 @@ static int do_parisc_entry(const char *filename, struct parisc_device_id *id,
return 1;
}
+/* Looks like: sdio:cNvNdN. */
+static int do_sdio_entry(const char *filename,
+ struct sdio_device_id *id, char *alias)
+{
+ id->class = TO_NATIVE(id->class);
+ id->vendor = TO_NATIVE(id->vendor);
+ id->device = TO_NATIVE(id->device);
+
+ strcpy(alias, "sdio:");
+ ADD(alias, "c", id->class != (__u8)SDIO_ANY_ID, id->class);
+ ADD(alias, "v", id->vendor != (__u16)SDIO_ANY_ID, id->vendor);
+ ADD(alias, "d", id->device != (__u16)SDIO_ANY_ID, id->device);
+
+ return 1;
+}
+
/* Ignore any prefix, eg. v850 prepends _ */
static inline int sym_is(const char *symbol, const char *name)
{
@@ -599,6 +615,10 @@ void handle_moddevtable(struct module *mod, struct elf_info *info,
do_table(symval, sym->st_size,
sizeof(struct parisc_device_id), "parisc",
do_parisc_entry, mod);
+ else if (sym_is(symname, "__mod_sdio_device_table"))
+ do_table(symval, sym->st_size,
+ sizeof(struct sdio_device_id), "sdio",
+ do_sdio_entry, mod);
}
/* Now add out buffered information to the generated C source */
diff --git a/scripts/namespace.pl b/scripts/namespace.pl
index f34373853ef..c6e88c652c2 100755
--- a/scripts/namespace.pl
+++ b/scripts/namespace.pl
@@ -105,7 +105,7 @@ sub linux_objects
if (/.*\.o$/ &&
! (
m:/built-in.o$:
- || m:arch/i386/kernel/vsyscall-syms.o$:
+ || m:arch/x86/kernel/vsyscall-syms.o$:
|| m:arch/ia64/ia32/ia32.o$:
|| m:arch/ia64/kernel/gate-syms.o$:
|| m:arch/ia64/lib/__divdi3.o$:
@@ -328,9 +328,9 @@ sub list_multiply_defined
}
# Special case for i386 entry code
if ($#{$def{$name}} == 1 && $name =~ /^__kernel_/ &&
- $def{$name}[0] eq "arch/i386/kernel/vsyscall-int80.o" &&
- $def{$name}[1] eq "arch/i386/kernel/vsyscall-sysenter.o") {
- &drop_def("arch/i386/kernel/vsyscall-sysenter.o", $name);
+ $def{$name}[0] eq "arch/x86/kernel/vsyscall-int80_32.o" &&
+ $def{$name}[1] eq "arch/x86/kernel/vsyscall-sysenter_32.o") {
+ &drop_def("arch/x86/kernel/vsyscall-sysenter_32.o", $name);
next;
}
printf "$name is multiply defined in :-\n";