diff options
| -rw-r--r-- | drivers/md/Kconfig | 14 | ||||
| -rw-r--r-- | init/do_mounts_md.c | 40 | ||||
| -rw-r--r-- | init/main.c | 2 | ||||
| -rw-r--r-- | scripts/bootgraph.pl | 147 |
4 files changed, 193 insertions, 10 deletions
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 07d92c11b5d..2281b5098e9 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -30,6 +30,20 @@ config BLK_DEV_MD If unsure, say N. +config MD_AUTODETECT + bool "Autodetect RAID arrays during kernel boot" + depends on BLK_DEV_MD=y + default y + ---help--- + If you say Y here, then the kernel will try to autodetect raid + arrays as part of its boot process. + + If you don't use raid and say Y, this autodetection can cause + a several-second delay in the boot time due to various + synchronisation steps that are part of this step. + + If unsure, say Y. + config MD_LINEAR tristate "Linear (append) mode" depends on BLK_DEV_MD diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c index 693d24694a6..48b3fadd83e 100644 --- a/init/do_mounts_md.c +++ b/init/do_mounts_md.c @@ -12,7 +12,12 @@ * The code for that is here. */ -static int __initdata raid_noautodetect, raid_autopart; +#ifdef CONFIG_MD_AUTODETECT +static int __initdata raid_noautodetect; +#else +static int __initdata raid_noautodetect=1; +#endif +static int __initdata raid_autopart; static struct { int minor; @@ -252,6 +257,8 @@ static int __init raid_setup(char *str) if (!strncmp(str, "noautodetect", wlen)) raid_noautodetect = 1; + if (!strncmp(str, "autodetect", wlen)) + raid_noautodetect = 0; if (strncmp(str, "partitionable", wlen)==0) raid_autopart = 1; if (strncmp(str, "part", wlen)==0) @@ -264,17 +271,32 @@ static int __init raid_setup(char *str) __setup("raid=", raid_setup); __setup("md=", md_setup); +static void autodetect_raid(void) +{ + int fd; + + /* + * Since we don't want to detect and use half a raid array, we need to + * wait for the known devices to complete their probing + */ + printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n"); + printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n"); + while (driver_probe_done() < 0) + msleep(100); + fd = sys_open("/dev/md0", 0, 0); + if (fd >= 0) { + sys_ioctl(fd, RAID_AUTORUN, raid_autopart); + sys_close(fd); + } +} + void __init md_run_setup(void) { create_dev("/dev/md0", MKDEV(MD_MAJOR, 0)); + if (raid_noautodetect) - printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=noautodetect)\n"); - else { - int fd = sys_open("/dev/md0", 0, 0); - if (fd >= 0) { - sys_ioctl(fd, RAID_AUTORUN, raid_autopart); - sys_close(fd); - } - } + printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=autodetect will force)\n"); + else + autodetect_raid(); md_setup_drive(); } diff --git a/init/main.c b/init/main.c index 3820323c4c8..27f6bf6108e 100644 --- a/init/main.c +++ b/init/main.c @@ -708,7 +708,7 @@ int do_one_initcall(initcall_t fn) int result; if (initcall_debug) { - printk("calling %pF\n", fn); + printk("calling %pF @ %i\n", fn, task_pid_nr(current)); t0 = ktime_get(); } diff --git a/scripts/bootgraph.pl b/scripts/bootgraph.pl new file mode 100644 index 00000000000..2243353fe55 --- /dev/null +++ b/scripts/bootgraph.pl @@ -0,0 +1,147 @@ +#!/usr/bin/perl + +# Copyright 2008, Intel Corporation +# +# This file is part of the Linux kernel +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# +# Authors: +# Arjan van de Ven <arjan@linux.intel.com> + + +# +# This script turns a dmesg output into a SVG graphic that shows which +# functions take how much time. You can view SVG graphics with various +# programs, including Inkscape, The Gimp and Firefox. +# +# +# For this script to work, the kernel needs to be compiled with the +# CONFIG_PRINTK_TIME configuration option enabled, and with +# "initcall_debug" passed on the kernel command line. +# +# usage: +# dmesg | perl scripts/bootgraph.pl > output.svg +# + +my @rows; +my %start, %end, %row; +my $done = 0; +my $rowcount = 0; +my $maxtime = 0; +my $firsttime = 100; +my $count = 0; +while (<>) { + my $line = $_; + if ($line =~ /([0-9\.]+)\] calling ([a-zA-Z0-9\_]+)\+/) { + my $func = $2; + if ($done == 0) { + $start{$func} = $1; + if ($1 < $firsttime) { + $firsttime = $1; + } + } + $row{$func} = 1; + if ($line =~ /\@ ([0-9]+)/) { + my $pid = $1; + if (!defined($rows[$pid])) { + $rowcount = $rowcount + 1; + $rows[$pid] = $rowcount; + } + $row{$func} = $rows[$pid]; + } + $count = $count + 1; + } + + if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_]+)\+.*returned/) { + if ($done == 0) { + $end{$2} = $1; + $maxtime = $1; + } + } + if ($line =~ /Write protecting the/) { + $done = 1; + } + if ($line =~ /Freeing unused kernel memory/) { + $done = 1; + } +} + +if ($count == 0) { + print "No data found in the dmesg. Make sure that 'printk.time=1' and\n"; + print "'initcall_debug' are passed on the kernel command line.\n\n"; + print "Usage: \n"; + print " dmesg | perl scripts/bootgraph.pl > output.svg\n\n"; + exit; +} + +print "<?xml version=\"1.0\" standalone=\"no\"?> \n"; +print "<svg width=\"1000\" height=\"100%\" version=\"1.1\" xmlns=\"http://www.w3.org/2000/svg\">\n"; + +my @styles; + +$styles[0] = "fill:rgb(0,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[1] = "fill:rgb(0,255,0);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[2] = "fill:rgb(255,0,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[3] = "fill:rgb(255,255,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[4] = "fill:rgb(255,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[5] = "fill:rgb(0,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[6] = "fill:rgb(0,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[7] = "fill:rgb(0,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[8] = "fill:rgb(255,0,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[9] = "fill:rgb(255,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[10] = "fill:rgb(255,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[11] = "fill:rgb(128,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; + +my $mult = 950.0 / ($maxtime - $firsttime); +my $threshold = ($maxtime - $firsttime) / 60.0; +my $stylecounter = 0; +while (($key,$value) = each %start) { + my $duration = $end{$key} - $start{$key}; + + if ($duration >= $threshold) { + my $s, $s2, $e, $y; + $s = ($value - $firsttime) * $mult; + $s2 = $s + 6; + $e = ($end{$key} - $firsttime) * $mult; + $w = $e - $s; + + $y = $row{$key} * 150; + $y2 = $y + 4; + + $style = $styles[$stylecounter]; + $stylecounter = $stylecounter + 1; + if ($stylecounter > 11) { + $stylecounter = 0; + }; + + print "<rect x=\"$s\" width=\"$w\" y=\"$y\" height=\"145\" style=\"$style\"/>\n"; + print "<text transform=\"translate($s2,$y2) rotate(90)\">$key</text>\n"; + } +} + + +# print the time line on top +my $time = $firsttime; +my $step = ($maxtime - $firsttime) / 15; +while ($time < $maxtime) { + my $s2 = ($time - $firsttime) * $mult; + my $tm = int($time * 100) / 100.0; + print "<text transform=\"translate($s2,89) rotate(90)\">$tm</text>\n"; + $time = $time + $step; +} + +print "</svg>\n"; |