aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/arm/Samsung-S3C24XX/Suspend.txt35
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c4
-rw-r--r--arch/arm/mach-omap1/clock.c20
-rw-r--r--arch/arm/mach-omap1/irq.c2
-rw-r--r--arch/arm/mach-omap1/pm.c12
-rw-r--r--arch/arm/mach-omap1/serial.c18
-rw-r--r--arch/arm/mach-omap2/board-h4.c13
-rw-r--r--arch/arm/mach-omap2/timer-gp.c3
-rw-r--r--arch/arm/mach-pxa/corgi_pm.c3
-rw-r--r--arch/arm/mach-pxa/spitz_pm.c3
-rw-r--r--arch/arm/oprofile/common.c3
-rw-r--r--arch/arm/plat-omap/dma.c14
-rw-r--r--arch/arm/plat-omap/dmtimer.c6
-rw-r--r--arch/arm/plat-omap/gpio.c9
-rw-r--r--arch/arm/plat-omap/mcbsp.c2
-rw-r--r--arch/arm/plat-omap/mux.c4
-rw-r--r--arch/arm/plat-s3c24xx/Kconfig7
-rw-r--r--drivers/acorn/char/Makefile1
-rw-r--r--drivers/acorn/char/i2c.c368
-rw-r--r--drivers/acorn/char/pcf8583.c284
-rw-r--r--drivers/acorn/char/pcf8583.h41
-rw-r--r--drivers/i2c/busses/Kconfig10
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-acorn.c97
-rw-r--r--drivers/rtc/Kconfig8
-rw-r--r--drivers/rtc/rtc-pcf8583.c29
-rw-r--r--drivers/scsi/arm/cumana_2.c4
-rw-r--r--drivers/scsi/arm/eesox.c4
-rw-r--r--drivers/scsi/arm/fas216.c9
-rw-r--r--drivers/scsi/arm/powertec.c5
-rw-r--r--drivers/scsi/arm/scsi.h2
-rw-r--r--include/asm-arm/arch-omap/entry-macro.S6
-rw-r--r--include/asm-arm/arch-omap/memory.h2
-rw-r--r--include/asm-arm/arch-omap/omap-alsa.h12
-rw-r--r--include/asm-arm/system.h40
36 files changed, 280 insertions, 802 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
index e12bc3284a2..0dab6e32c13 100644
--- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
@@ -5,10 +5,10 @@
Introduction
------------
- The S3C2410 supports a low-power suspend mode, where the SDRAM is kept
+ The S3C24XX supports a low-power suspend mode, where the SDRAM is kept
in Self-Refresh mode, and all but the essential peripheral blocks are
powered down. For more information on how this works, please look
- at the S3C2410 datasheets from Samsung.
+ at the relevant CPU datasheet from Samsung.
Requirements
@@ -56,6 +56,27 @@ Machine Support
Note, the original method of adding an late_initcall() is wrong,
and will end up initialising all compiled machines' pm init!
+ The following is an example of code used for testing wakeup from
+ an falling edge on IRQ_EINT0:
+
+
+static irqreturn_t button_irq(int irq, void *pw)
+{
+ return IRQ_HANDLED;
+}
+
+statuc void __init machine_init(void)
+{
+ ...
+
+ request_irq(IRQ_EINT0, button_irq, IRQF_TRIGGER_FALLING,
+ "button-irq-eint0", NULL);
+
+ enable_irq_wake(IRQ_EINT0);
+
+ s3c2410_pm_init();
+}
+
Debugging
---------
@@ -70,6 +91,12 @@ Debugging
care should be taken that any external clock sources that the UARTs
rely on are still enabled at that point.
+ 3) If any debugging is placed in the resume path, then it must have the
+ relevant clocks and peripherals setup before use (ie, bootloader).
+
+ For example, if you transmit a character from the UART, the baud
+ rate and uart controls must be setup beforehand.
+
Configuration
-------------
@@ -89,6 +116,10 @@ Configuration
Allows the entire memory to be checksummed before and after the
suspend to see if there has been any corruption of the contents.
+ Note, the time to calculate the CRC is dependant on the CPU speed
+ and the size of memory. For an 64Mbyte RAM area on an 200MHz
+ S3C2410, this can take approximately 4 seconds to complete.
+
This support requires the CRC32 function to be enabled.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d75879d9dde..ac2ffdcfbbb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -190,6 +190,7 @@ config ARCH_CO285
config ARCH_EBSA110
bool "EBSA-110"
select ISA
+ select NO_IOPORT
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index cbe909bad79..70014f751bc 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -16,6 +16,8 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@@ -103,7 +105,7 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata =
static struct spi_board_info nokia770_spi_board_info[] __initdata = {
[0] = {
- .modalias = "lcd_lph8923",
+ .modalias = "lcd_mipid",
.bus_num = 2,
.chip_select = 3,
.max_speed_hz = 12000000,
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 638490e62d5..f625f6dd228 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -432,8 +432,7 @@ static int omap1_clk_enable(struct clk *clk)
}
if (clk->flags & CLOCK_NO_IDLE_PARENT)
- if (!cpu_is_omap24xx())
- omap1_clk_deny_idle(clk->parent);
+ omap1_clk_deny_idle(clk->parent);
}
ret = clk->enable(clk);
@@ -454,8 +453,7 @@ static void omap1_clk_disable(struct clk *clk)
if (likely(clk->parent)) {
omap1_clk_disable(clk->parent);
if (clk->flags & CLOCK_NO_IDLE_PARENT)
- if (!cpu_is_omap24xx())
- omap1_clk_allow_idle(clk->parent);
+ omap1_clk_allow_idle(clk->parent);
}
}
}
@@ -471,7 +469,7 @@ static int omap1_clk_enable_generic(struct clk *clk)
if (unlikely(clk->enable_reg == 0)) {
printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
clk->name);
- return 0;
+ return -EINVAL;
}
if (clk->flags & ENABLE_REG_32BIT) {
@@ -651,10 +649,18 @@ int __init omap1_clk_init(void)
int crystal_type = 0; /* Default 12 MHz */
u32 reg;
+#ifdef CONFIG_DEBUG_LL
+ /* Resets some clocks that may be left on from bootloader,
+ * but leaves serial clocks on.
+ */
+ omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+#endif
+
/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
omap_writew(reg, SOFT_REQ_REG);
- omap_writew(0, SOFT_REQ_REG2);
+ if (!cpu_is_omap15xx())
+ omap_writew(0, SOFT_REQ_REG2);
clk_init(&omap1_clk_functions);
@@ -685,7 +691,7 @@ int __init omap1_clk_init(void)
info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
if (info != NULL) {
- if (!cpu_is_omap1510())
+ if (!cpu_is_omap15xx())
crystal_type = info->system_clock_type;
}
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 6383a12ad97..410d3e78dd0 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -238,7 +238,7 @@ void __init omap_init_irq(void)
if (cpu_is_omap730())
omap_unmask_irq(INT_730_IH2_IRQ);
- else if (cpu_is_omap1510())
+ else if (cpu_is_omap15xx())
omap_unmask_irq(INT_1510_IH2_IRQ);
else if (cpu_is_omap16xx())
omap_unmask_irq(INT_1610_IH2_IRQ);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 4834758d340..49efe903dac 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -256,7 +256,8 @@ void omap_pm_suspend(void)
tps65010_set_led(LED1, OFF);
}
- omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
+ if (!cpu_is_omap15xx())
+ omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
/*
* Step 1: turn off interrupts (FIXME: NOTE: already disabled)
@@ -434,7 +435,8 @@ void omap_pm_suspend(void)
MPUI1610_RESTORE(OMAP_IH2_3_MIR);
}
- omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
+ if (!cpu_is_omap15xx())
+ omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
/*
* Reenable interrupts
@@ -704,6 +706,8 @@ static struct pm_ops omap_pm_ops ={
static int __init omap_pm_init(void)
{
+ int error;
+
printk("Power Management for TI OMAP.\n");
/*
@@ -760,7 +764,9 @@ static int __init omap_pm_init(void)
omap_pm_init_proc();
#endif
- subsys_create_file(&power_subsys, &sleep_while_idle_attr);
+ error = subsys_create_file(&power_subsys, &sleep_while_idle_attr);
+ if (error)
+ printk(KERN_ERR "subsys_create_file failed: %d\n", error);
if (cpu_is_omap16xx()) {
/* configure LOW_PWR pin */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 4cc98a578e4..10a4fe88b2f 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-omap1/serial.c
*
- * OMAP1 CPU identification code
+ * OMAP1 serial support.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -59,7 +59,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
omap_serial_outp(p, UART_OMAP_SCR, 0x08); /* TX watermark */
omap_serial_outp(p, UART_OMAP_MDR1, 0x00); /* enable UART */
- if (!cpu_is_omap1510()) {
+ if (!cpu_is_omap15xx()) {
omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01));
}
@@ -121,7 +121,7 @@ void __init omap_serial_init(void)
serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
}
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap15xx()) {
serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
@@ -147,10 +147,10 @@ void __init omap_serial_init(void)
printk("Could not get uart1_ck\n");
else {
clk_enable(uart1_ck);
- if (cpu_is_omap1510())
+ if (cpu_is_omap15xx())
clk_set_rate(uart1_ck, 12000000);
}
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap15xx()) {
omap_cfg_reg(UART1_TX);
omap_cfg_reg(UART1_RTS);
if (machine_is_omap_innovator()) {
@@ -167,12 +167,12 @@ void __init omap_serial_init(void)
printk("Could not get uart2_ck\n");
else {
clk_enable(uart2_ck);
- if (cpu_is_omap1510())
+ if (cpu_is_omap15xx())
clk_set_rate(uart2_ck, 12000000);
else
clk_set_rate(uart2_ck, 48000000);
}
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap15xx()) {
omap_cfg_reg(UART2_TX);
omap_cfg_reg(UART2_RTS);
if (machine_is_omap_innovator()) {
@@ -189,10 +189,10 @@ void __init omap_serial_init(void)
printk("Could not get uart3_ck\n");
else {
clk_enable(uart3_ck);
- if (cpu_is_omap1510())
+ if (cpu_is_omap15xx())
clk_set_rate(uart3_ck, 12000000);
}
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap15xx()) {
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
}
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 3b1ad1d981a..1e7ed6d22ca 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -39,7 +39,6 @@
#include "prcm-regs.h"
#include <asm/io.h>
-#include <asm/delay.h>
static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
@@ -179,9 +178,11 @@ static int h4_select_irda(struct device *dev, int state)
return err;
}
-static void set_trans_mode(void *data)
+static void set_trans_mode(struct work_struct *work)
{
- int *mode = data;
+ struct omap_irda_config *irda_config =
+ container_of(work, struct omap_irda_config, gpio_expa.work);
+ int mode = irda_config->mode;
unsigned char expa;
int err = 0;
@@ -191,7 +192,7 @@ static void set_trans_mode(void *data)
expa &= ~0x01;
- if (!(*mode & IR_SIRMODE)) { /* MIR/FIR */
+ if (!(mode & IR_SIRMODE)) { /* MIR/FIR */
expa |= 0x01;
}
@@ -204,9 +205,9 @@ static int h4_transceiver_mode(struct device *dev, int mode)
{
struct omap_irda_config *irda_config = dev->platform_data;
+ irda_config->mode = mode;
cancel_delayed_work(&irda_config->gpio_expa);
- PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode);
-#error this is not permitted - mode is an argument variable
+ PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
schedule_delayed_work(&irda_config->gpio_expa, 0);
return 0;
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 973189cd976..45d1aaa51b5 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -24,6 +24,7 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/irq.h>
#include <asm/mach/time.h>
#include <asm/arch/dmtimer.h>
@@ -64,7 +65,7 @@ static void __init omap2_gp_timer_init(void)
BUG_ON(gptimer == NULL);
omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
- tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / 100;
+ tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
tick_period -= 1;
setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 165017de8d0..392c3871736 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -16,7 +16,8 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <asm/apm-emulation.h>
+#include <linux/apm-emulation.h>
+
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index b97d543d936..745a4dc7acd 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -16,7 +16,8 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <asm/apm-emulation.h>
+#include <linux/apm-emulation.h>
+
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 0a007b931f6..a9de727c932 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -131,6 +131,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
struct op_arm_model_spec *spec = NULL;
int ret = -ENODEV;
+ ops->backtrace = arm_backtrace;
+
#ifdef CONFIG_CPU_XSCALE
spec = &op_xscale_spec;
#endif
@@ -161,7 +163,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
ops->start = op_arm_start;
ops->stop = op_arm_stop;
ops->cpu_type = op_arm_model->name;
- ops->backtrace = arm_backtrace;
printk(KERN_INFO "oprofile: using %s\n", spec->name);
}
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index bb045e5ddbd..f3f84fbf8b8 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -557,7 +557,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
omap_enable_channel_irq(free_ch);
/* Clear the CSR register and IRQ status register */
OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
- omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
+ omap_writel(1 << free_ch, OMAP_DMA4_IRQSTATUS_L0);
}
*dma_ch_out = free_ch;
@@ -597,10 +597,7 @@ void omap_free_dma(int lch)
/* Clear the CSR register and IRQ status register */
OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
-
- val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
- val |= 1 << lch;
- omap_writel(val, OMAP_DMA4_IRQSTATUS_L0);
+ omap_writel(1 << lch, OMAP_DMA4_IRQSTATUS_L0);
/* Disable all DMA interrupts for the channel. */
OMAP_DMA_CICR_REG(lch) = 0;
@@ -927,7 +924,6 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
static int omap2_dma_handle_ch(int ch)
{
u32 status = OMAP_DMA_CSR_REG(ch);
- u32 val;
if (!status)
return 0;
@@ -948,11 +944,7 @@ static int omap2_dma_handle_ch(int ch)
dma_chan[ch].dev_id);
OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
-
- val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
- /* ch in this function is from 0-31 while in register it is 1-32 */
- val = 1 << (ch);
- omap_writel(val, OMAP_DMA4_IRQSTATUS_L0);
+ omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
if (likely(dma_chan[ch].callback != NULL))
dma_chan[ch].callback(ch, status, dma_chan[ch].data);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index bcbb8d7392b..45f0439bffb 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -90,8 +90,8 @@ static struct omap_dm_timer dm_timers[] = {
{ .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
{ .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
{ .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
- { .phys_base = 0xfffb4400, .irq = INT_1610_GPTIMER7 },
- { .phys_base = 0xfffb4c00, .irq = INT_1610_GPTIMER8 },
+ { .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 },
+ { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
};
#elif defined(CONFIG_ARCH_OMAP2)
@@ -314,6 +314,8 @@ struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
{
BUG();
+
+ return 0;
}
#endif
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 4f2fd559133..b8c01de208b 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -974,10 +974,11 @@ static struct irq_chip gpio_irq_chip = {
};
static struct irq_chip mpuio_irq_chip = {
- .name = "MPUIO",
- .ack = mpuio_ack_irq,
- .mask = mpuio_mask_irq,
- .unmask = mpuio_unmask_irq
+ .name = "MPUIO",
+ .ack = mpuio_ack_irq,
+ .mask = mpuio_mask_irq,
+ .unmask = mpuio_unmask_irq,
+ .set_type = gpio_irq_type,
};
static int initialized;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index ec50008a2df..b8d6f17ff58 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -20,8 +20,8 @@
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/delay.h>
-#include <asm/delay.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 042105ac30b..6c798d28868 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -116,7 +116,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
}
/* Check for pull up or pull down selection on 1610 */
- if (!cpu_is_omap1510()) {
+ if (!cpu_is_omap15xx()) {
if (cfg->pu_pd_reg && cfg->pull_val) {
spin_lock_irqsave(&mux_spin_lock, flags);
pu_pd_orig = omap_readl(cfg->pu_pd_reg);
@@ -172,7 +172,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
- if (!cpu_is_omap1510()) {
+ if (!cpu_is_omap15xx()) {
if (cfg->pu_pd_reg && cfg->pull_val) {
printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
cfg->pu_pd_name, cfg->pu_pd_reg,
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 860869528f4..b972f36d547 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -58,6 +58,11 @@ config S3C2410_PM_CHECK
going to sleep. The blocks are then checked on resume for any
errors.
+ Note, this can take several seconds depending on memory size
+ and CPU speed.
+
+ See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
config S3C2410_PM_CHECK_CHUNKSIZE
int "S3C2410 PM Suspend CRC Chunksize (KiB)"
depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
@@ -68,6 +73,8 @@ config S3C2410_PM_CHECK_CHUNKSIZE
the CRC data block will take more memory, but wil identify any
faults with better precision.
+ See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
config S3C2410_LOWLEVEL_UART_PORT
int "S3C2410 UART to use for low-level messages"
default 0
diff --git a/drivers/acorn/char/Makefile b/drivers/acorn/char/Makefile
index 2fa9a8bf48a..d006c9f168d 100644
--- a/drivers/acorn/char/Makefile
+++ b/drivers/acorn/char/Makefile
@@ -2,5 +2,4 @@
# Makefile for the acorn character device drivers.
#
-obj-$(CONFIG_ARCH_ACORN) += i2c.o pcf8583.o
obj-$(CONFIG_L7200_KEYB) += defkeymap-l7200.o keyb_l7200.o
diff --git a/drivers/acorn/char/i2c.c b/drivers/acorn/char/i2c.c
deleted file mode 100644
index d276fd14d63..00000000000
--- a/drivers/acorn/char/i2c.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * linux/drivers/acorn/char/i2c.c
- *
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * ARM IOC/IOMD i2c driver.
- *
- * On Acorn machines, the following i2c devices are on the bus:
- * - PCF8583 real time clock & static RAM
- */
-#include <linux/capability.h>
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/miscdevice.h>
-#include <linux/rtc.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/fs.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/hardware/ioc.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-
-#include "pcf8583.h"
-
-extern int (*set_rtc)(void);
-
-static struct i2c_client *rtc_client;
-static const unsigned char days_in_mon[] =
- { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-
-#define CMOS_CHECKSUM (63)
-
-/*
- * Acorn machines store the year in the static RAM at
- * location 128.
- */
-#define CMOS_YEAR (64 + 128)
-
-static inline int rtc_command(int cmd, void *data)
-{
- int ret = -EIO;
-
- if (rtc_client)
- ret = rtc_client->driver->command(rtc_client, cmd, data);
-
- return ret;
-}
-
-/*
- * Update the century + year bytes in the CMOS RAM, ensuring
- * that the check byte is correctly adjusted for the change.
- */
-static int rtc_update_year(unsigned int new_year)
-{
- unsigned char yr[2], chk;
- struct mem cmos_year = { CMOS_YEAR, sizeof(yr), yr };
- struct mem cmos_check = { CMOS_CHECKSUM, 1, &chk };
- int ret;
-
- ret = rtc_command(MEM_READ, &cmos_check);
- if (ret)
- goto out;
- ret = rtc_command(MEM_READ, &cmos_year);
- if (ret)
- goto out;
-
- chk -= yr[1] + yr[0];
-
- yr[1] = new_year / 100;
- yr[0] = new_year % 100;
-
- chk += yr[1] + yr[0];
-
- ret = rtc_command(MEM_WRITE, &cmos_year);
- if (ret == 0)
- ret = rtc_command(MEM_WRITE, &cmos_check);
- out:
- return ret;
-}
-
-/*
- * Read the current RTC time and date, and update xtime.
- */
-static void get_rtc_time(struct rtc_tm *rtctm, unsigned int *year)
-{
- unsigned char ctrl, yr[2];
- struct mem rtcmem = { CMOS_YEAR, sizeof(yr), yr };
- int real_year, year_offset;
-
- /*
- * Ensure that the RTC is running.
- */
- rtc_command(RTC_GETCTRL, &ctrl);
- if (ctrl & 0xc0) {
- unsigned char new_ctrl = ctrl & ~0xc0;
-
- printk(KERN_WARNING "RTC: resetting control %02x -> %02x\n",
- ctrl, new_ctrl);
-
- rtc_command(RTC_SETCTRL, &new_ctrl);
- }
-
- if (rtc_command(RTC_GETDATETIME, rtctm) ||
- rtc_command(MEM_READ, &rtcmem))
- return;
-
- real_year = yr[0];
-
- /*
- * The RTC year holds the LSB two bits of the current
- * year, which should reflect the LSB two bits of the
- * CMOS copy of the year. Any difference indicates
- * that we have to correct the CMOS version.
- */
- year_offset = rtctm->year_off - (real_year & 3);
- if (year_offset < 0)
- /*
- * RTC year wrapped. Adjust it appropriately.
- */
- year_offset += 4;
-
- *year = real_year + year_offset + yr[1] * 100;
-}
-
-static int set_rtc_time(struct rtc_tm *rtctm, unsigned int year)
-{
- unsigned char leap;
- int ret;
-
- leap = (!(year % 4) && (year % 100)) || !(year % 400);
-
- if (rtctm->mon > 12 || rtctm->mon == 0 || rtctm->mday == 0)
- return -EINVAL;
-
- if (rtctm->mday > (days_in_mon[rtctm->mon] + (rtctm->mon == 2 && leap)))
- return -EINVAL;
-
- if (rtctm->hours >= 24 || rtctm->mins >= 60 || rtctm->secs >= 60)
- return -EINVAL;
-
- /*
- * The RTC's own 2-bit year must reflect the least
- * significant two bits of the CMOS year.
- */
- rtctm->year_off = (year % 100) & 3;
-
- ret = rtc_command(RTC_SETDATETIME, rtctm);
- if (ret == 0)
- ret = rtc_update_year(year);
-
- return ret;
-}
-
-/*
- * Set the RTC time only. Note that
- * we do not touch the date.
- */
-static int k_set_rtc_time(void)
-{
- struct rtc_tm new_rtctm, old_rtctm;
- unsigned long nowtime = xtime.tv_sec;
-
- if (rtc_command(RTC_GETDATETIME, &old_rtctm))
- return 0;
-
- new_rtctm.cs = xtime.tv_nsec / 10000000;
- new_rtctm.secs = nowtime % 60; nowtime /= 60;
- new_rtctm.mins = nowtime % 60; nowtime /= 60;
- new_rtctm.hours = nowtime % 24;
-
- /*
- * avoid writing when we're going to change the day
- * of the month. We will retry in the next minute.
- * This basically means that if the RTC must not drift
- * by more than 1 minute in 11 minutes.
- *
- * [ rtc: 1/1/2000 23:58:00, real 2/1/2000 00:01:00,
- * rtc gets set to 1/1/2000 00:01:00 ]
- */
- if ((old_rtctm.hours == 23 && old_rtctm.mins == 59) ||
- (new_rtctm.hours == 23 && new_rtctm.mins == 59))
- return 1;
-
- return rtc_command(RTC_SETTIME, &new_rtctm);
-}
-
-static int rtc_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- unsigned int year;
- struct rtc_time rtctm;
- struct rtc_tm rtc_raw;
-
- switch (cmd) {
- case RTC_ALM_READ:
- case RTC_ALM_SET:
- break;
-
- case RTC_RD_TIME:
- memset(&rtctm, 0, sizeof(struct rtc_time));
- get_rtc_time(&rtc_raw, &year);
- rtctm.tm_sec = rtc_raw.secs;
- rtctm.tm_min = rtc_raw.mins;
- rtctm.tm_hour = rtc_raw.hours;
- rtctm.tm_mday = rtc_raw.mday;
- rtctm.tm_mon = rtc_raw.mon - 1; /* month starts at 0 */
- rtctm.tm_year = year - 1900; /* starts at 1900 */
- return copy_to_user((void *)arg, &rtctm, sizeof(rtctm))
- ? -EFAULT : 0;
-
- case RTC_SET_TIME:
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- if (copy_from_user(&rtctm, (void *)arg, sizeof(rtctm)))
- return -EFAULT;
- rtc_raw.secs = rtctm.tm_sec;
- rtc_raw.mins = rtctm.tm_min;
- rtc_raw.hours = rtctm.tm_hour;
- rtc_raw.mday = rtctm.tm_mday;
- rtc_raw.mon = rtctm.tm_mon + 1;
- year = rtctm.tm_year + 1900;
- return set_rtc_time(&rtc_raw, year);
- break;
-
- case RTC_EPOCH_READ:
- return put_user(1900, (unsigned long *)arg);
-
- }
- return -EINVAL;
-}
-
-static const struct file_operations rtc_fops = {
- .ioctl = rtc_ioctl,
-};
-
-static struct miscdevice rtc_dev = {
- .minor = RTC_MINOR,
- .name = "rtc",
- .fops = &rtc_fops,
-};
-
-/* IOC / IOMD i2c driver */
-
-#define FORCE_ONES 0xdc
-#define SCL 0x02
-#define SDA 0x01
-
-/*
- * We must preserve all non-i2c output bits in IOC_CONTROL.
- * Note also that we need to preserve the value of SCL and
- * SDA outputs as well (which may be different from the
- * values read back from IOC_CONTROL).
- */
-static u_int force_ones;
-
-static void ioc_setscl(void *data, int state)
-{
- u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
- u_int ones = force_ones;
-
- if (state)
- ones |= SCL;
- else
- ones &= ~SCL;
-
- force_ones = ones;
-
- ioc_writeb(ioc_control | ones, IOC_CONTROL);
-}
-
-static void ioc_setsda(void *data, int state)
-{
- u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
- u_int ones = force_ones;
-
- if (state)
- ones |= SDA;
- else
- ones &= ~SDA;
-
- force_ones = ones;
-
- ioc_writeb(ioc_control | ones, IOC_CONTROL);
-}
-
-static int ioc_getscl(void *data)
-{
- return (ioc_readb(IOC_CONTROL) & SCL) != 0;
-}
-
-static int ioc_getsda(void *data)
-{
- return (ioc_readb(IOC_CONTROL) & SDA) != 0;
-}
-
-static struct i2c_algo_bit_data ioc_data = {
- .setsda = ioc_setsda,
- .setscl = ioc_setscl,
- .getsda = ioc_getsda,
- .getscl = ioc_getscl,
- .udelay = 80,
- .timeout = 100
-};
-
-static int ioc_client_reg(struct i2c_client *client)
-{
- if (client->driver->id == I2C_DRIVERID_PCF8583 &&
- client->addr == 0x50) {
- struct rtc_tm rtctm;
- unsigned int year;
- struct timespec tv;
-
- rtc_client = client;
- get_rtc_time(&rtctm, &year);
-
- tv.tv_nsec = rtctm.cs * 10000000;
- tv.tv_sec = mktime(year, rtctm.mon, rtctm.mday,
- rtctm.hours, rtctm.mins, rtctm.secs);
- do_settimeofday(&tv);
- set_rtc = k_set_rtc_time;
- }
-
- return 0;
-}
-
-static int ioc_client_unreg(struct i2c_client *client)
-{
- if (client == rtc_client) {
- set_rtc = NULL;
- rtc_client = NULL;
- }
-
- return 0;
-}
-
-static struct i2c_adapter ioc_ops = {
- .id = I2C_HW_B_IOC,
- .algo_data = &ioc_data,
- .client_register = ioc_client_reg,
- .client_unregister = ioc_client_unreg,
-};
-
-static int __init i2c_ioc_init(void)
-{
- int ret;
-
- force_ones = FORCE_ONES | SCL | SDA;
-
- ret = i2c_bit_add_bus(&ioc_ops);
-
- if (ret >= 0){
- ret = misc_register(&rtc_dev);
- if(ret < 0)
- i2c_del_adapter(&ioc_ops);
- }
-
- return ret;
-}
-
-__initcall(i2c_ioc_init);
diff --git a/drivers/acorn/char/pcf8583.c b/drivers/acorn/char/pcf8583.c
deleted file mode 100644
index 9b49f316ae9..00000000000
--- a/drivers/acorn/char/pcf8583.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * linux/drivers/acorn/char/pcf8583.c
- *
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Driver for PCF8583 RTC & RAM chip
- */
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/mc146818rtc.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/bcd.h>
-
-#include "pcf8583.h"
-
-static struct i2c_driver pcf8583_driver;
-
-static unsigned short ignore[] = { I2C_CLIENT_END };
-static unsigned short normal_addr[] = { 0x50, I2C_CLIENT_END };
-static unsigned short *forces[] = { NULL };
-
-static struct i2c_client_address_data addr_data = {
- .normal_i2c = normal_addr,
- .probe = ignore,
- .ignore = ignore,
- .forces = forces,
-};
-
-#define set_ctrl(x, v) i2c_set_clientdata(x, (void *)(unsigned int)(v))
-#define get_ctrl(x) ((unsigned int)i2c_get_clientdata(x))
-
-static int
-pcf8583_attach(struct i2c_adapter *adap, int addr, int kind)
-{
- struct i2c_client *c;
- unsigned char buf[1], ad[1] = { 0 };
- struct i2c_msg msgs[2] = {
- {
- .addr = addr,
- .flags = 0,
- .len = 1,
- .buf = ad,
- }, {
- .addr = addr,
- .flags = I2C_M_RD,
- .len = 1,
- .buf = buf,
- }
- };
-
- c = kmalloc(sizeof(*c), GFP_KERNEL);
- if (!c)
- return -ENOMEM;
-
- memset(c, 0, sizeof(*c));
- c->addr = addr;
- c->adapter = adap;
- c->driver = &pcf8583_driver;
-
- if (i2c_transfer(c->adapter, msgs, 2) == 2)
- set_ctrl(c, buf[0]);
-
- return i2c_attach_client(c);
-}
-
-static int
-pcf8583_probe(struct i2c_adapter *adap)
-{
- return i2c_probe(adap, &addr_data, pcf8583_attach);
-}
-
-static int
-pcf8583_detach(struct i2c_client *client)
-{
- i2c_detach_client(client);
- kfree(client);
- return 0;
-}
-
-static int
-pcf8583_get_datetime(struct i2c_client *client, struct rtc_tm *dt)
-{
- unsigned char buf[8], addr[1] = { 1 };
- struct i2c_msg msgs[2] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = 1,
- .buf = addr,
- }, {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = 6,
- .buf = buf,
- }
- };
- int ret = -EIO;
-
- memset(buf, 0, sizeof(buf));
-
- ret = i2c_transfer(client->adapter, msgs, 2);
- if (ret == 2) {
- dt->year_off = buf[4] >> 6;
- dt->wday = buf[5] >> 5;
-
- buf[4] &= 0x3f;
- buf[5] &= 0x1f;
-
- dt->cs = BCD_TO_BIN(buf[0]);
- dt->secs = BCD_TO_BIN(buf[1]);
- dt->mins = BCD_TO_BIN(buf[2]);
- dt->hours = BCD_TO_BIN(buf[3]);
- dt->mday = BCD_TO_BIN(buf[4]);
- dt->mon = BCD_TO_BIN(buf[5]);
-
- ret = 0;
- }
-
- return ret;
-}
-
-static int
-pcf8583_set_datetime(struct i2c_client *client, struct rtc_tm *dt, int datetoo)
-{
- unsigned char buf[8];
- int ret, len = 6;
-
- buf[0] = 0;
- buf[1] = get_ctrl(client) | 0x80;
- buf[2] = BIN_TO_BCD(dt->cs);
- buf[3] = BIN_TO_BCD(dt->secs);
- buf[4] = BIN_TO_BCD(dt->mins);
- buf[5] = BIN_TO_BCD(dt->hours);
-
- if (datetoo) {
- len = 8;
- buf[6] = BIN_TO_BCD(dt->mday) | (dt->year_off << 6);
- buf[7] = BIN_TO_BCD(dt->mon) | (dt->wday << 5);
- }
-
- ret = i2c_master_send(client, (char *)buf, len);
- if (ret == len)
- ret = 0;
-
- buf[1] = get_ctrl(client);
- i2c_master_send(client, (char *)buf, 2);
-
- return ret;
-}
-
-static int
-pcf8583_get_ctrl(struct i2c_client *client, unsigned char *ctrl)
-{
- *ctrl = get_ctrl(client);
- return 0;
-}
-
-static int
-pcf8583_set_ctrl(struct i2c_client *client, unsigned char *ctrl)
-{
- unsigned char buf[2];
-
- buf[0] = 0;
- buf[1] = *ctrl;
- set_ctrl(client, *ctrl);
-
- return i2c_master_send(client, (char *)buf, 2);
-}
-
-static int
-pcf8583_read_mem(struct i2c_client *client, struct mem *mem)
-{
- unsigned char addr[1];
- struct i2c_msg msgs[2] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = 1,
- .buf = addr,
- }, {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = mem->nr,
- .buf = mem->data,
- }
- };
-
- if (mem->loc < 8)
- return -EINVAL;
-
- addr[0] = mem->loc;
-
- return i2c_transfer(client->adapter, msgs, 2) == 2 ? 0 : -EIO;
-}
-
-static int
-pcf8583_write_mem(struct i2c_client *client, struct mem *mem)
-{
- unsigned char addr[1];
- struct i2c_msg msgs[2] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = 1,
- .buf = addr,
- }, {
- .addr = client->addr,
- .flags = I2C_M_NOSTART,
- .len = mem->nr,
- .buf = mem->data,
- }
- };
-
- if (mem->loc < 8)
- return -EINVAL;
-
- addr[0] = mem->loc;
-
- return i2c_transfer(client->adapter, msgs, 2) == 2 ? 0 : -EIO;
-}
-
-static int
-pcf8583_command(struct i2c_client *client, unsigned int cmd, void *arg)
-{
- switch (cmd) {
- case RTC_GETDATETIME:
- return pcf8583_get_datetime(client, arg);
-
- case RTC_SETTIME:
- return pcf8583_set_datetime(client, arg, 0);
-
- case RTC_SETDATETIME:
- return pcf8583_set_datetime(client, arg, 1);
-
- case RTC_GETCTRL:
- return pcf8583_get_ctrl(client, arg);
-
- case RTC_SETCTRL:
- return pcf8583_set_ctrl(client, arg);
-
- case MEM_READ:
- return pcf8583_read_mem(client, arg);
-
- case MEM_WRITE:
- return pcf8583_write_mem(client, arg);
-
- default:
- return -EINVAL;
- }
-}
-
-static struct i2c_driver pcf8583_driver = {
- .driver = {
- .name = "PCF8583",
- },
- .id = I2C_DRIVERID_PCF8583,
- .attach_adapter = pcf8583_probe,
- .detach_client = pcf8583_detach,
- .command = pcf8583_command
-};
-
-static __init int pcf8583_init(void)
-{
- return i2c_add_driver(&pcf8583_driver);
-}
-
-static __exit void pcf8583_exit(void)
-{
- i2c_del_driver(&pcf8583_driver);
-}
-
-module_init(pcf8583_init);
-module_exit(pcf8583_exit);
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("PCF8583 I2C RTC driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/acorn/char/pcf8583.h b/drivers/acorn/char/pcf8583.h
deleted file mode 100644
index 847f7fdb876..00000000000
--- a/drivers/acorn/char/pcf8583.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * linux/drivers/acorn/char/pcf8583.h
- *
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct rtc_tm {
- unsigned char cs;
- unsigned char secs;
- unsigned char mins;
- unsigned char hours;
- unsigned char mday;
- unsigned char mon;
- unsigned char year_off;
- unsigned char wday;
-};
-
-struct mem {
- unsigned int loc;
- unsigned int nr;
- unsigned char *data;
-};
-
-#define RTC_GETDATETIME 0
-#define RTC_SETTIME 1
-#define RTC_SETDATETIME 2
-#define RTC_GETCTRL 3
-#define RTC_SETCTRL 4
-#define MEM_READ 5
-#define MEM_WRITE 6
-
-#define CTRL_STOP 0x80
-#define CTRL_HOLD 0x40
-#define CTRL_32KHZ 0x00
-#define CTRL_MASK 0x08
-#define CTRL_ALARMEN 0x04
-#define CTRL_ALARM 0x02
-#define CTRL_TIMER 0x01
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 4d44a2db29d..fb19dbb31e4 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -495,6 +495,16 @@ config I2C_VERSATILE
This driver can also be built as a module. If so, the module
will be called i2c-versatile.
+config I2C_ACORN
+ bool "Acorn IOC/IOMD I2C bus support"
+ depends on I2C && ARCH_ACORN
+ default y
+ select I2C_ALGOBIT
+ help
+ Say yes if you want to support the I2C bus on Acorn platforms.
+
+ If you don't know, say Y.
+
config I2C_VIA
tristate "VIA 82C586B"
depends on I2C && PCI && EXPERIMENTAL
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 03505aa44bb..290b5401835 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
+obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
obj-$(CONFIG_I2C_VIA) += i2c-via.o
obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
new file mode 100644
index 00000000000..09bd7f40b90
--- /dev/null
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -0,0 +1,97 @@
+/*
+ * linux/drivers/acorn/char/i2c.c
+ *
+ * Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ARM IOC/IOMD i2c driver.
+ *
+ * On Acorn machines, the following i2c devices are on the bus:
+ * - PCF8583 real time clock & static RAM
+ */
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/hardware/ioc.h>
+#include <asm/system.h>
+
+#define FORCE_ONES 0xdc
+#define SCL 0x02
+#define SDA 0x01
+
+/*
+ * We must preserve all non-i2c output bits in IOC_CONTROL.
+ * Note also that we need to preserve the value of SCL and
+ * SDA outputs as well (which may be different from the
+ * values read back from IOC_CONTROL).
+ */
+static u_int force_ones;
+
+static void ioc_setscl(void *data, int state)
+{
+ u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
+ u_int ones = force_ones;
+
+ if (state)
+ ones |= SCL;
+ else
+ ones &= ~SCL;
+
+ force_ones = ones;
+
+ ioc_writeb(ioc_control | ones, IOC_CONTROL);
+}
+
+static void ioc_setsda(void *data, int state)
+{
+ u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
+ u_int ones = force_ones;
+
+ if (state)
+ ones |= SDA;
+ else
+ ones &= ~SDA;
+
+ force_ones = ones;
+
+ ioc_writeb(ioc_control | ones, IOC_CONTROL);
+}
+
+static int ioc_getscl(void *data)
+{
+ return (ioc_readb(IOC_CONTROL) & SCL) != 0;
+}
+
+static int ioc_getsda(void *data)
+{
+ return (ioc_readb(IOC_CONTROL) & SDA) != 0;
+}
+
+static struct i2c_algo_bit_data ioc_data = {
+ .setsda = ioc_setsda,
+ .setscl = ioc_setscl,
+ .getsda = ioc_getsda,
+ .getscl = ioc_getscl,
+ .udelay = 80,
+ .timeout = 100
+};
+
+static struct i2c_adapter ioc_ops = {
+ .id = I2C_HW_B_IOC,
+ .algo_data = &ioc_data,
+};
+
+static int __init i2c_ioc_init(void)
+{
+ force_ones = FORCE_ONES | SCL | SDA;
+
+ return i2c_bit_add_bus(&ioc_ops);
+}
+
+__initcall(i2c_ioc_init);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index deef29646e0..95826b92ca4 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -207,10 +207,12 @@ config RTC_DRV_PCF8563
config RTC_DRV_PCF8583
tristate "Philips PCF8583"
- depends on RTC_CLASS && I2C
+ depends on RTC_CLASS && I2C && ARCH_RPC
help
- If you say yes here you get support for the
- Philips PCF8583 RTC chip.
+ If you say yes here you get support for the Philips PCF8583
+ RTC chip found on Acorn RiscPCs. This driver supports the
+ platform specific method of retrieving the current year from
+ the RTC's SRAM.
This driver can also be built as a module. If so, the module
will be called rtc-pcf8583.
diff --git a/drivers/rtc/rtc-pcf8583.c b/drivers/rtc/rtc-pcf8583.c
index 5875ebb8c79..d48b0337458 100644
--- a/drivers/rtc/rtc-pcf8583.c
+++ b/drivers/rtc/rtc-pcf8583.c
@@ -40,7 +40,7 @@ struct pcf8583 {
#define CTRL_ALARM 0x02
#define CTRL_TIMER 0x01
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END };
/* Module parameters */
I2C_CLIENT_INSMOD;
@@ -81,11 +81,11 @@ static int pcf8583_get_datetime(struct i2c_client *client, struct rtc_time *dt)
buf[4] &= 0x3f;
buf[5] &= 0x1f;
- dt->tm_sec = BCD_TO_BIN(buf[1]);
- dt->tm_min = BCD_TO_BIN(buf[2]);
- dt->tm_hour = BCD_TO_BIN(buf[3]);
- dt->tm_mday = BCD_TO_BIN(buf[4]);
- dt->tm_mon = BCD_TO_BIN(buf[5]);
+ dt->tm_sec = BCD2BIN(buf[1]);
+ dt->tm_min = BCD2BIN(buf[2]);
+ dt->tm_hour = BCD2BIN(buf[3]);
+ dt->tm_mday = BCD2BIN(buf[4]);
+ dt->tm_mon = BCD2BIN(buf[5]) - 1;
}
return ret == 2 ? 0 : -EIO;
@@ -99,14 +99,14 @@ static int pcf8583_set_datetime(struct i2c_client *client, struct rtc_time *dt,
buf[0] = 0;
buf[1] = get_ctrl(client) | 0x80;
buf[2] = 0;
- buf[3] = BIN_TO_BCD(dt->tm_sec);
- buf[4] = BIN_TO_BCD(dt->tm_min);
- buf[5] = BIN_TO_BCD(dt->tm_hour);
+ buf[3] = BIN2BCD(dt->tm_sec);
+ buf[4] = BIN2BCD(dt->tm_min);
+ buf[5] = BIN2BCD(dt->tm_hour);
if (datetoo) {
len = 8;
- buf[6] = BIN_TO_BCD(dt->tm_mday) | (dt->tm_year << 6);
- buf[7] = BIN_TO_BCD(dt->tm_mon) | (dt->tm_wday << 5);
+ buf[6] = BIN2BCD(dt->tm_mday) | (dt->tm_year << 6);
+ buf[7] = BIN2BCD(dt->tm_mon + 1) | (dt->tm_wday << 5);
}
ret = i2c_master_send(client, (char *)buf, len);
@@ -226,7 +226,7 @@ static int pcf8583_rtc_read_time(struct device *dev, struct rtc_time *tm)
*/
year_offset += 4;
- tm->tm_year = real_year + year_offset + year[1] * 100;
+ tm->tm_year = (real_year + year_offset + year[1] * 100) - 1900;
return 0;
}
@@ -237,6 +237,7 @@ static int pcf8583_rtc_set_time(struct device *dev, struct rtc_time *tm)
unsigned char year[2], chk;
struct rtc_mem cmos_year = { CMOS_YEAR, sizeof(year), year };
struct rtc_mem cmos_check = { CMOS_CHECKSUM, 1, &chk };
+ unsigned int proper_year = tm->tm_year + 1900;
int ret;
/*
@@ -258,8 +259,8 @@ static int pcf8583_rtc_set_time(struct device *dev, struct rtc_time *tm)
chk -= year[1] + year[0];
- year[1] = tm->tm_year / 100;
- year[0] = tm->tm_year % 100;
+ year[1] = proper_year / 100;
+ year[0] = proper_year % 100;
chk += year[1] + year[0];
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index d2d51dc51ab..82add77ad13 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -178,10 +178,10 @@ cumanascsi_2_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
dma_dir = DMA_MODE_READ,
alatch_dir = ALATCH_DMA_IN;
- dma_map_sg(dev, info->sg, bufs + 1, map_dir);
+ dma_map_sg(dev, info->sg, bufs, map_dir);
disable_dma(dmach);
- set_dma_sg(dmach, info->sg, bufs + 1);
+ set_dma_sg(dmach, info->sg, bufs);
writeb(alatch_dir, info->base + CUMANASCSI2_ALATCH);
set_dma_mode(dmach, dma_dir);
enable_dma(dmach);
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index d4136524fc4..ed06a8c19ad 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -175,10 +175,10 @@ eesoxscsi_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
map_dir = DMA_FROM_DEVICE,
dma_dir = DMA_MODE_READ;
- dma_map_sg(dev, info->sg, bufs + 1, map_dir);
+ dma_map_sg(dev, info->sg, bufs, map_dir);
disable_dma(dmach);
- set_dma_sg(dmach, info->sg, bufs + 1);
+ set_dma_sg(dmach, info->sg, bufs);
set_dma_mode(dmach, dma_dir);
enable_dma(dmach);
return fasdma_real_all;
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 2969cc0ff25..fb5f2028438 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -633,7 +633,7 @@ static void fas216_updateptrs(FAS216_Info *info, int bytes_transferred)
BUG_ON(bytes_transferred < 0);
- info->SCpnt->request_bufflen -= bytes_transferred;
+ SCp->phase -= bytes_transferred;
while (bytes_transferred != 0) {
if (SCp->this_residual > bytes_transferred)
@@ -715,7 +715,7 @@ static void fas216_cleanuptransfer(FAS216_Info *info)
return;
if (dmatype == fasdma_real_all)
- total = info->SCpnt->request_bufflen;
+ total = info->scsi.SCp.phase;
else
total = info->scsi.SCp.this_residual;
@@ -753,7 +753,7 @@ static void fas216_transfer(FAS216_Info *info)
fas216_log(info, LOG_BUFFER,
"starttransfer: buffer %p length 0x%06x reqlen 0x%06x",
info->scsi.SCp.ptr, info->scsi.SCp.this_residual,
- info->SCpnt->request_bufflen);
+ info->scsi.SCp.phase);
if (!info->scsi.SCp.ptr) {
fas216_log(info, LOG_ERROR, "null buffer passed to "
@@ -784,7 +784,7 @@ static void fas216_transfer(FAS216_Info *info)
info->dma.transfer_type = dmatype;
if (dmatype == fasdma_real_all)
- fas216_set_stc(info, info->SCpnt->request_bufflen);
+ fas216_set_stc(info, info->scsi.SCp.phase);
else
fas216_set_stc(info, info->scsi.SCp.this_residual);
@@ -2114,6 +2114,7 @@ request_sense:
SCpnt->SCp.buffers_residual = 0;
SCpnt->SCp.ptr = (char *)SCpnt->sense_buffer;
SCpnt->SCp.this_residual = sizeof(SCpnt->sense_buffer);
+ SCpnt->SCp.phase = sizeof(SCpnt->sense_buffer);
SCpnt->SCp.Message = 0;
SCpnt->SCp.Status = 0;
SCpnt->request_bufflen = sizeof(SCpnt->sense_buffer);
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index f9cd20bfb95..159047a3499 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -148,10 +148,10 @@ powertecscsi_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
map_dir = DMA_FROM_DEVICE,
dma_dir = DMA_MODE_READ;
- dma_map_sg(dev, info->sg, bufs + 1, map_dir);
+ dma_map_sg(dev, info->sg, bufs, map_dir);
disable_dma(dmach);
- set_dma_sg(dmach, info->sg, bufs + 1);
+ set_dma_sg(dmach, info->sg, bufs);
set_dma_mode(dmach, dma_dir);
enable_dma(dmach);
return fasdma_real_all;
@@ -342,6 +342,7 @@ powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
info->base = base;
powertecscsi_terminator_ctl(host, term[ec->slot_no]);
+ info->ec = ec;
info->info.scsi.io_base = base + POWERTEC_FAS216_OFFSET;
info->info.scsi.io_shift = POWERTEC_FAS216_SHIFT;
info->info.scsi.irq = ec->irq;
diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h
index 3a39579bd08..21ba57155be 100644
--- a/drivers/scsi/arm/scsi.h
+++ b/drivers/scsi/arm/scsi.h
@@ -80,6 +80,7 @@ static inline void init_SCp(struct scsi_cmnd *SCpnt)
(page_address(SCpnt->SCp.buffer->page) +
SCpnt->SCp.buffer->offset);
SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
+ SCpnt->SCp.phase = SCpnt->request_bufflen;
#ifdef BELT_AND_BRACES
/*
@@ -98,6 +99,7 @@ static inline void init_SCp(struct scsi_cmnd *SCpnt)
} else {
SCpnt->SCp.ptr = (unsigned char *)SCpnt->request_buffer;
SCpnt->SCp.this_residual = SCpnt->request_bufflen;
+ SCpnt->SCp.phase = SCpnt->request_bufflen;
}
/*
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
index c90dff4828f..f6967c8df32 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -61,6 +61,12 @@
.macro disable_fiq
.endm
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =VA_IC_BASE
ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h
index df50dd53e1d..48fabc49316 100644
--- a/include/asm-arm/arch-omap/memory.h
+++ b/include/asm-arm/arch-omap/memory.h
@@ -70,7 +70,7 @@
#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev) (cpu_is_omap1510() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
+#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \
(dma_addr_t)virt_to_lbus(page_address(page)) : \
diff --git a/include/asm-arm/arch-omap/omap-alsa.h b/include/asm-arm/arch-omap/omap-alsa.h
index df4695474e3..fcaf44c1471 100644
--- a/include/asm-arm/arch-omap/omap-alsa.h
+++ b/include/asm-arm/arch-omap/omap-alsa.h
@@ -65,7 +65,7 @@ struct audio_stream {
int period; /* current transfer period */
int periods; /* current count of periods registerd in the DMA engine */
spinlock_t dma_lock; /* for locking in DMA operations */
- snd_pcm_substream_t *stream; /* the pcm stream */
+ struct snd_pcm_substream *stream; /* the pcm stream */
unsigned linked:1; /* dma channels linked */
int offset; /* store start position of the last period in the alsa buffer */
int (*hw_start)(void); /* interface to start HW interface, e.g. McBSP */
@@ -76,8 +76,8 @@ struct audio_stream {
* Alsa card structure for aic23
*/
struct snd_card_omap_codec {
- snd_card_t *card;
- snd_pcm_t *pcm;
+ struct snd_card *card;
+ struct snd_pcm *pcm;
long samplerate;
struct audio_stream s[2]; /* playback & capture */
};
@@ -89,9 +89,9 @@ struct snd_card_omap_codec {
struct omap_alsa_codec_config {
char *name;
struct omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
- snd_pcm_hw_constraint_list_t *hw_constraints_rates;
- snd_pcm_hardware_t *snd_omap_alsa_playback;
- snd_pcm_hardware_t *snd_omap_alsa_capture;
+ struct snd_pcm_hw_constraint_list *hw_constraints_rates;
+ struct snd_pcm_hardware *snd_omap_alsa_playback;
+ struct snd_pcm_hardware *snd_omap_alsa_capture;
void (*codec_configure_dev)(void);
void (*codec_set_samplerate)(long);
void (*codec_clock_setup)(void);
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index f4386906b20..f06d8a43fde 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -167,11 +167,25 @@ extern unsigned int user_debug;
: : "r" (0) : "memory")
#define dmb() __asm__ __volatile__ ("" : : : "memory")
#endif
-#define mb() dmb()
-#define rmb() mb()
-#define wmb() mb()
-#define read_barrier_depends() do { } while(0)
-#define set_mb(var, value) do { var = value; mb(); } while (0)
+
+#define mb() barrier()
+#define rmb() barrier()
+#define wmb() barrier()
+#define read_barrier_depends() do { } while(0)
+
+#ifdef CONFIG_SMP
+#define smp_mb() dmb()
+#define smp_rmb() dmb()
+#define smp_wmb() dmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() read_barrier_depends()
+#endif /* CONFIG_SMP */
+
+#define set_mb(var, value) do { var = value; smp_mb(); } while (0)
#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
@@ -243,22 +257,6 @@ static inline void sched_cacheflush(void)
{
}
-#ifdef CONFIG_SMP
-
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
-
-#else
-
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while(0)
-
-#endif /* CONFIG_SMP */
-
#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
/*
* On the StrongARM, "swp" is terminally broken since it bypasses the